Dieter Kluenter wrote:
Hallo, das sieht doch alles ganz gut aus. Was kommt denn nach dem schnipp ?
Gut, wenn Du das wirklich wissen wilst :-) Ich fang aber mal mit dem davor an :-) Oct 8 17:35:42 gini syslogd 1.3-3: restart. Oct 8 17:35:43 gini kernel: klogd 1.3-3, log source = /proc/kmsg started. Oct 8 17:35:43 gini kernel: Inspecting /boot/System.map Oct 8 17:35:47 gini kernel: Loaded 6209 symbols from /boot/System.map. Oct 8 17:35:47 gini kernel: Symbols match kernel version 2.2.5. Oct 8 17:35:47 gini kernel: Loaded 7 symbols from 8 modules. Oct 8 17:35:47 gini kernel: Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled Oct 8 17:35:47 gini kernel: Keyboard timeout[2] Oct 8 17:35:47 gini kernel: Keyboard timeout[2] Nich meckern haengt keine Taste dran, die Kiste steht in der Ecke [hier die schon geposteten Zeilen einfügen] Oct 8 17:36:01 gini kernel: diald uses obsolete (PF_INET,SOCK_PACKET) Oct 8 17:36:02 gini kernel: SLIP: version 0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256). Oct 8 17:36:06 gini diald[228]: Running connect (pid = 241). Oct 8 17:36:06 gini connect: Initializing Modem Oct 8 17:36:07 gini connect: Dialing system Oct 8 17:36:10 gini lpd[258]: restarted Oct 8 17:36:25 gini squid[282]: Starting Squid Cache version 2.0.PATCH2 for i686-pc-linux-gnu... Oct 8 17:36:25 gini squid[282]: Process ID 282 Oct 8 17:36:25 gini squid[282]: With 256 file descriptors available Oct 8 17:36:25 gini squid[282]: Started 5 'dnsserver' processes Oct 8 17:36:26 gini sshd[291]: log: Server listening on port 22. Oct 8 17:36:26 gini sshd[291]: log: Generating 768 bit RSA key. Oct 8 17:36:27 gini squid[282]: Unlinkd pipe opened on FD 14 Oct 8 17:36:27 gini squid[282]: Swap maxSize 20480 KB, estimated 3413 objects Oct 8 17:36:27 gini squid[282]: Target number of buckets: 68 Oct 8 17:36:27 gini squid[282]: Using 8192 Store buckets, replacement runs every 10 seconds Oct 8 17:36:27 gini squid[282]: Max Mem size: 8192 KB Oct 8 17:36:27 gini squid[282]: Max Swap size: 20480 KB Oct 8 17:36:29 gini squid[282]: Rebuilding storage in Cache Dir #0 (DIRTY) Oct 8 17:36:29 gini /usr/sbin/cron[296]: (CRON) STARTUP (fork ok) Oct 8 17:36:33 gini squid[282]: Loaded Icons. Oct 8 17:36:33 gini squid[282]: Accepting HTTP connections on port 3128, FD 37. Oct 8 17:36:33 gini squid[282]: Accepting ICP messages on port 3130, FD 38. Oct 8 17:36:33 gini squid[282]: Outgoing ICP messages on port 3130, FD 39. Oct 8 17:36:33 gini squid[282]: Accepting HTCP messages on port 4827, FD 40. Oct 8 17:36:33 gini squid[282]: Outgoing HTCP messages on port 4827, FD 41. Oct 8 17:36:34 gini squid[282]: Configuring Parent 141.32.46.100/3128/3130 Oct 8 17:36:34 gini squid[282]: Ready to serve requests. Oct 8 17:36:39 gini connect: Connected Oct 8 17:36:39 gini connect: Loggin in Oct 8 17:36:40 gini squid[282]: Done reading Cache Dir #0 swaplog (6168 entries) Oct 8 17:36:40 gini connect: Protocol started Oct 8 17:36:40 gini squid[282]: Finished rebuilding storage disk. Oct 8 17:36:40 gini squid[282]: 4382 Entries read from previous logfile. Oct 8 17:36:40 gini squid[282]: 0 Entries scanned from swap files. Oct 8 17:36:40 gini squid[282]: 0 Invalid entries. Oct 8 17:36:40 gini squid[282]: 0 With invalid flags. Oct 8 17:36:40 gini squid[282]: 2597 Objects loaded. Oct 8 17:36:40 gini squid[282]: 0 Objects expired. Oct 8 17:36:40 gini squid[282]: 1785 Objects cancelled. Oct 8 17:36:40 gini squid[282]: 0 Duplicate URLs purged. Oct 8 17:36:40 gini squid[282]: 0 Swapfile clashes avoided. Oct 8 17:36:40 gini diald[228]: Running pppd (pid = 307). Oct 8 17:36:40 gini squid[282]: Took 17 seconds ( 152.8 objects/sec). Oct 8 17:36:40 gini squid[282]: Beginning Validation Procedure Oct 8 17:36:44 gini kernel: CSLIP: code copyright 1989 Regents of the University of California Oct 8 17:36:44 gini kernel: PPP: version 2.3.3 (demand dialling) Oct 8 17:36:44 gini kernel: PPP line discipline registered. Oct 8 17:36:44 gini kernel: registered device ppp0 Oct 8 17:36:44 gini pppd[307]: pppd 2.3.5 started by root, uid 0 Oct 8 17:36:44 gini pppd[307]: Using interface ppp0 Oct 8 17:36:44 gini pppd[307]: Connect: ppp0 <--> /dev/ttyS1 Oct 8 17:36:44 gini sshd[291]: log: RSA key generation complete. Oct 8 17:36:46 gini squid[282]: Completed Validation Procedure Oct 8 17:36:46 gini squid[282]: Validated 2597 Entries Oct 8 17:36:46 gini squid[282]: store_swap_size = 18583k Oct 8 17:36:47 gini kernel: PPP BSD Compression module registered Oct 8 17:36:48 gini kernel: PPP Deflate Compression module registered Oct 8 17:37:07 gini pppd[307]: Hangup (SIGHUP)Oct 8 17:37:07 gini pppd[307]: Modem hangup Oct 8 17:37:07 gini pppd[307]: Connection terminated. Oct 8 17:37:08 gini pppd[307]: Exit. Oct 8 17:37:09 gini diald[228]: Nonzero exit status (7) on command '/sbin/route add 192.168.1.99 metric 1 wi Oct 8 17:37:09 gini diald[228]: Nonzero exit status (7) on command '/sbin/route add default metric 1 window Oct 8 17:37:10 gini diald[228]: Nonzero exit status (7) on command '/sbin/route add 192.168.1.99 metric 1 wi Oct 8 17:37:10 gini diald[228]: Nonzero exit status (7) on command '/sbin/route add default metric 1 window Oct 8 17:37:11 gini diald[228]: Delaying 30 seconds before clear to dial. Oct 8 17:37:43 gini diald[228]: Running connect (pid = 325). Oct 8 17:37:43 gini connect: Initializing Modem Oct 8 17:37:44 gini connect: Dialing system Oct 8 17:38:11 gini connect: Connected Oct 8 17:38:11 gini connect: Loggin in Oct 8 17:38:13 gini connect: Protocol started Oct 8 17:38:13 gini diald[228]: Running pppd (pid = 334). Oct 8 17:38:14 gini pppd[334]: pppd 2.3.5 started by root, uid 0 Oct 8 17:38:14 gini pppd[334]: Using interface ppp0 Oct 8 17:38:14 gini pppd[334]: Connect: ppp0 <--> /dev/ttyS1 Oct 8 17:38:17 gini pppd[334]: local IP address 141.32.17.27 [schnipp jetzt isst die Kiste endlich gebootet] So, ich hoffe ihr könnt damit was anfangen. Andreas -- -------------------------------------------------------------------- Andreas Bock registered Linux User #136542 Phone: +49 37603 50526 mailto:a_bock@gmx.de Fax : +49 37603 2156 http://www.fh-zwickau.de/~an --------------------------------------------------------------------- --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com