Am Dienstag, 18. Juli 2006 18:06 schrieb David Haller:
Hallo,
Am Die, 18 Jul 2006, Al Bogner schrieb:
Am Montag, 17. Juli 2006 23:52 schrieb Al Bogner:
Ich rätsle, warum xmms meckert, dass die Soundkarte nicht konfiguriert ist bzw. "Direkter Zugriff auf Soundgerät nicht möglich" ist.
Welches Ausgabeplugin und wie konfiguriert?
Alles ist Default Suse 10.0 bzw. Default von den Packmanpaketen. KDE-Sound war auch "Voreinstellung". Es bringt auch nichts nach 1 Sekunde das Device freizugeben. BTW amarok hat auch "out of the box" funktioniert. Bei einem anderen Rechner mit dieser Soundkarte, hat es auch Probleme gegeben und nach einer Deinstallation von xmms und erneuter Installtion hat es dann warum auch immer geklappt. Ich habe xmms nur zum Testen verwendet ob Sound grundsätzlich funktioniert. Mittlerweile habe ich entschieden xmms runterzuwerfen. Mit dem Rechner soll sowieso bis auf weiteres keine Musik gehört werden. Ich wollte nur, dass es grundsätzlich funktioniert. Nachdem es Alternativen beim Sound gibt, kämpfe ich lieber mit wichtigeren Problemen, nämlich: The following warning/error was logged by the smartd daemon: Device: /dev/hda, 1 Currently unreadable (pending) sectors For details see host's SYSLOG (default: /var/log/messages). Interessanterweise hat badblocks -svw vor der Installation keine Probleme aufgezeigt und augenblicklich habe ich wenig Lust den Rechner neu aufzusetzen, wo gerade alles so funktioniert wie ich es mir wünsche. Wie kann ich den genauen defekten Bereich auf der HD herausfinden und ausklammern? Jul 18 20:05:53 client9 smartd[5276]: Device: /dev/hda, 1 Currently unreadable (pending) sectors Jul 18 20:05:53 client9 smartd[5276]: Device: /dev/hda, SMART Prefailure Attribute: 1 Raw_Read_Error_Rate changed from 58 to 57 Jul 18 20:05:53 client9 smartd[5276]: Device: /dev/hda, SMART Usage Attribute: 194 Temperature_Celsius changed from 35 to 41 smartctl -a /dev/hda smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: ST360020A Firmware Version: 3.34 User Capacity: 60,022,480,896 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Jul 18 20:30:39 2006 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 420) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 62) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 058 050 025 Pre-fail Always - 172812235 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1762 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 384517807 9 Power_On_Hours 0x0032 088 088 000 Old_age Always - 10591 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3258 194 Temperature_Celsius 0x0022 044 055 000 Old_age Always - 44 195 Hardware_ECC_Recovered 0x001a 100 253 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 10 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 10 occurred at disk power-on lifetime: 10568 hours (440 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 8c 8d f4 e5 Error: ICRC, ABRT at LBA = 0x05f48d8c = 99913100 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 8c 8d f4 e5 00 00:00:00.188 READ DMA c8 00 00 8c 8c f4 e5 00 00:00:04.536 READ DMA c8 00 00 8c 8b f4 e5 00 00:00:04.545 READ DMA c8 00 00 8c 8a f4 e5 00 00:00:04.508 READ DMA c8 00 00 8c 89 f4 e5 00 00:00:04.542 READ DMA Error 9 occurred at disk power-on lifetime: 10546 hours (439 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 de f0 22 e0 Error: UNC at LBA = 0x0022f0de = 2289886 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 d8 01 dd f0 22 e0 00 00:00:12.911 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:07.068 READ DMA 40 d8 02 dd f0 22 e0 00 00:00:20.917 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:00.078 READ DMA 40 d8 02 db f0 22 e0 00 00:00:12.910 READ VERIFY SECTOR(S) Error 8 occurred at disk power-on lifetime: 10546 hours (439 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 de f0 22 e0 Error: UNC 1 sectors at LBA = 0x0022f0de = 2289886 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 01 00 00 00 e0 00 00:00:00.078 READ DMA 40 d8 02 db f0 22 e0 00 00:00:12.910 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:00.593 READ DMA 40 d8 04 db f0 22 e0 00 00:00:23.361 READ VERIFY SECTOR(S) 40 d8 04 d7 f0 22 e0 00 00:00:12.903 READ VERIFY SECTOR(S) Error 7 occurred at disk power-on lifetime: 10546 hours (439 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 de f0 22 e0 Error: UNC at LBA = 0x0022f0de = 2289886 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 d8 04 d7 f0 22 e0 00 00:00:12.903 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:03.198 READ DMA 40 d8 08 d7 f0 22 e0 00 00:00:05.199 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:00.073 READ DMA 40 d8 08 cf f0 22 e0 00 00:00:12.833 READ VERIFY SECTOR(S) Error 6 occurred at disk power-on lifetime: 10546 hours (439 days + 10 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 01 de f0 22 e0 Error: UNC 1 sectors at LBA = 0x0022f0de = 2289886 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 d8 01 00 00 00 e0 00 00:00:00.073 READ DMA 40 d8 08 cf f0 22 e0 00 00:00:12.833 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:12.910 READ DMA 40 d8 10 cf f0 22 e0 00 00:00:15.073 READ VERIFY SECTOR(S) c8 d8 01 00 00 00 e0 00 00:00:00.158 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10583 - # 2 Extended offline Completed: read failure 90% 10581 2289886 # 3 Short offline Completed without error 00% 10578 - Device does not support Selective Self Tests/Logging Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: suse-linux-unsubscribe@suse.com Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: suse-linux-help@suse.com