![](https://seccdn.libravatar.org/avatar/b52a770ea508d025d3bc1341c42dab08.jpg?s=120&d=mm&r=g)
Moin Moin, beim herumexperimentieren mit Suspend to RAM kam es wohl zu einem Problem mit dem Filesystem. Na ja, da ich eh noch am Anfang stehe und eigentlich nur damit beschäftigt bin alles ans laufen zu bringen, habe ich mir gedacht, ich setzte einfach neu auf. Tja, so einfach war's dann doch nicht. Meine WLAN-Karte von Intel will nicht mehr. Ich verstehe aber nicht so richtig wo es hängt. Ich habe auf die Kernel-PCMCIA-Variante umgestellt. Die Wireless-Tools installiert. Die Karte wird erkannt. Die Karte wurde mit Yast eingerichtet, aber das Netzwerk startet nicht: kernel: eth0: IEEE standard IBSS ad-hoc mode supported. kernel: eth0: WEP supported, "128"-bit key. kernel: eth0: MAC address 00:02:B3:06:3C:68 kernel: eth0: Station name "Prism I" kernel: eth0: ready kernel: eth0: index 0x01: Vcc 5.0, irq 11, io 0x0100-0x0147 cardmgr[532]: executing: './network start eth0' cardmgr[532]: + /sbin/route add -net 192.168.0.0 netmask 255.255.255.0 dev eth0 cardmgr[532]: + SIOCADDRT: Network is down cardmgr[532]: + SIOCADDRT: Network is unreachable In der wireless.opts habe ich die essid meines Netzes eingetragen. Hat jemand eine Idee, was ich noch machen kann? Gruß & Danke Thilo