Hallo, hat jemand dazu eine funktionierende Lösung? Im Netz findet man einige Treffer aber nichts hilft hier. [0:0:3:0] process HP C6270A 3828 - [1:0:0:0] disk ATA ST3160815AS 3.AD /dev/sda [2:0:0:0] cd/dvd SONY DVD+-RW AW-Q160S KDS1 - Es handelt sich um einen älteren Adaptec-Controller der 2940er Reihe. Alternativ versuche ich noch einen Controller eines anderen Herstellers zu finden. Gruß Aug 28 07:02:14 dooku2 kernel: scsi 0:0:3:0: Attempting to queue an ABORT message Aug 28 07:02:14 dooku2 kernel: CDB: 0x8 0x0 0x0 0x80 0x0 0x0 Aug 28 07:02:14 dooku2 kernel: scsi0: At time of recovery, card was not paused Aug 28 07:02:14 dooku2 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< Aug 28 07:02:14 dooku2 kernel: scsi0: Dumping Card State while idle, at SEQADDR 0x7 Aug 28 07:02:14 dooku2 kernel: Card was paused Aug 28 07:02:14 dooku2 kernel: ACCUM = 0xe0, SINDEX = 0x37, DINDEX = 0x24, ARG_2 = 0x0 Aug 28 07:02:14 dooku2 kernel: HCNT = 0x0 SCBPTR = 0x0 Aug 28 07:02:14 dooku2 kernel: SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]:(P_BUSFREE) Aug 28 07:02:14 dooku2 kernel: SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) SBLKCTL[0x0] Aug 28 07:02:14 dooku2 kernel: SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) Aug 28 07:02:14 dooku2 kernel: SSTAT0[0x5]:(DMADONE|SDONE) SSTAT1[0xa]:(PHASECHG|BUSFREE) Aug 28 07:02:14 dooku2 kernel: SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) Aug 28 07:02:14 dooku2 kernel: SXFRCTL0[0x80]:(DFON) DFCNTRL[0x0] DFSTATUS[0x2d]:(FIFOEMP|DFTHRESH|HDONE|FIFOQWDEMP) Aug 28 07:02:14 dooku2 kernel: STACK: 0x0 0x164 0x1a5 0x3 Aug 28 07:02:14 dooku2 kernel: SCB count = 4 Aug 28 07:02:14 dooku2 kernel: Kernel NEXTQSCB = 2 Aug 28 07:02:14 dooku2 kernel: Card NEXTQSCB = 2 Aug 28 07:02:14 dooku2 kernel: QINFIFO entries: Aug 28 07:02:14 dooku2 kernel: Waiting Queue entries: Aug 28 07:02:14 dooku2 kernel: Disconnected Queue entries: 0:3 Aug 28 07:02:14 dooku2 kernel: QOUTFIFO entries: Aug 28 07:02:14 dooku2 kernel: Sequencer Free SCB List: 1 2 Aug 28 07:02:14 dooku2 kernel: Sequencer SCB Info: Aug 28 07:02:14 dooku2 kernel: 0 SCB_CONTROL[0x44]:(DISCONNECTED|DISCENB) SCB_SCSIID[0x37] Aug 28 07:02:14 dooku2 kernel: SCB_LUN[0x0] SCB_TAG[0x3] Aug 28 07:02:14 dooku2 kernel: 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]:(TWIN_CHNLB|OID|TWIN_TID) Aug 28 07:02:14 dooku2 kernel: SCB_LUN[0xff]:(SCB_XFERLEN_ODD|LID) SCB_TAG[0xff] Aug 28 07:02:14 dooku2 kernel: Pending list: Aug 28 07:02:14 dooku2 kernel: 3 SCB_CONTROL[0x40]:(DISCENB) SCB_SCSIID[0x37] SCB_LUN[0x0] Aug 28 07:02:14 dooku2 kernel: Kernel Free SCB list: 1 0 Aug 28 07:02:14 dooku2 kernel: Untagged Q(3): 3 Aug 28 07:02:14 dooku2 kernel: Aug 28 07:02:14 dooku2 kernel: <<<<<<<<<<<<<<<<< Dump Card State Ends
>>>>>>>>>>>> Aug 28 07:02:14 dooku2 kernel: (scsi0:A:3:0): Device is disconnected, re-queuing SCB Aug 28 07:02:14 dooku2 kernel: Recovery code sleeping Aug 28 07:02:14 dooku2 kernel: Recovery SCB completes Aug 28 07:02:14 dooku2 kernel: Recovery code awake Aug 28 07:02:14 dooku2 kernel: aic7xxx_abort returns 0x2002 Aug 28 07:02:14 dooku2 kernel: scsi 0:0:3:0: Attempting to queue a TARGET RESET message Aug 28 07:02:14 dooku2 kernel: CDB: 0x8 0x0 0x0 0x80 0x0 0x0 Aug 28 07:02:14 dooku2 kernel: scsi 0:0:3:0: Command not found Aug 28 07:02:14 dooku2 kernel: aic7xxx_dev_reset returns 0x2002
-- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org