Martin Schröder schrieb:
2008/4/13, Ralf Prengel <ralf.prengel@rprengel.de>:
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 13593 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 97301459894274
Das kann eigentlich nicht sein. :-)
Trotzdem würde ich mal ein Backup machen. Kann smartctl überhaupt mit der Platte umgehen? Was sagt smartctl -a?
Gruß Martin lx1700:/download/ # smartctl -a /dev/sda smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION === Device Model: FUJITSU MHY2250BH Serial Number: K432T83286DE Firmware Version: 0085000B User Capacity: 250.059.350.016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Not recognized. Minor revision code: 0x42 Local Time is: Sun Apr 13 17:39:58 2008 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (1009) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 143) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 046 Pre-fail Always - 225973 3 Spin_Up_Time 0x0003 100 100 025 Pre-fail Always - 1 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 89 5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 8589934592000 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 13700 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32 191 G-Sense_Error_Rate 0x0012 100 100 000 Old_age Always - 937 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 10 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 34 (Lifetime Min/Max 16/47) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 13628 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 97310101209090 198 Offline_Uncorrectable 0x0032 100 100 000 Old_age Always - 80500125990914 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 1250530 200 Multi_Zone_Error_Rate 0x0032 100 100 000 Old_age Always - 2578535 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 2 - # 2 Short offline Completed without error 00% 1 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org