Hi Linux freaks! Also , auf ein zweites ! Ich habe hier ein paar Probleme bei der Einrichtung meiner Grafikkarte unter Linux . ( SuSE Linux 5.2 ) Ich habe mal die Fehlermeldungen im Vergleich zur letzten Mail etwas detaillierter angegeben . Ich würde mich freuen , wenn jemand dazu die eine oder andere Idee hat . Okay , hier sind erst mal ein paar detaillierte Beschreibungen zur Systemkonfiguration : Intel P2 300 Gigabyte Ga686DLX 128 mb ram ibm dcas 34330 , ide und uw scsi Diamond fire gl 1000 pro agp , 8 mb sdram grafikspeicher SB awe64 pci netzwerkkarte modem auf com2 17 zoll monitor und so das übliche , was man halt zum leben braucht So , bei der Konfiguration von XF86 via XF86Setup , erhalte ich einfach nur folgende Fehlermeldung : _X11TranssocketUnixConnect : Can't connect : errno 111 danach beschwert sich YaST noch mal kurz und erzählt mir , daß die Konfiguration von XF86 beendet sei . mittlerweile habe ich auch die .X.err gefunden und füge sie einfach mal an : XSuSE_Elsa_GLoria 3.02 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: March 3 1998 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (send problem reports to x@suse.de) Operating System: Linux 2.0.32 i586 [ELF] Configured drivers: GLINT: accelerated server for 3DLabs GLINT graphics adapters (Patchlevel 0) Copyright 1997-1998 S.u.S.E. GmbH, Fürth Copyright 1992-1998 The XFree86 Project, Inc. Permission is hereby granted, free of charge, to any person to redistribute this software and its documentation verbatim (including all files and documentation without any changes) for any purpose provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation. (using VT number 7) XF86Config: /etc/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keymap: "xfree86(de)" (overrides other XKB settings) (**) Mouse: type: PS/2, device: /dev/psaux, baudrate: 1200, 3 button emulation (timeout: 50ms) (**) GLINT: Graphics device ID: "firegl 1000 pro my config" (**) GLINT: Monitor ID: "mymon1" (--) GLINT: Mode "800x600" needs hsync freq of 64.02 kHz. Deleted. (--) GLINT: Mode "1024x768" needs hsync freq of 62.50 kHz. Deleted. (--) GLINT: Mode "1152x864" needs hsync freq of 62.42 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 64.25 kHz. Deleted. (--) GLINT: Mode "1024x768" needs hsync freq of 70.24 kHz. Deleted. (--) GLINT: Mode "1152x864" needs hsync freq of 70.88 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 74.59 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. (--) GLINT: Mode "1152x864" needs hsync freq of 76.01 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 78.86 kHz. Deleted. (--) GLINT: Mode "1024x768" needs hsync freq of 80.21 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 81.13 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) GLINT: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) GLINT: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) GLINT: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) GLINT: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (--) GLINT: found TI chip GLINT Permedia 2 at card #0 func #0 with base 0xe6000000 (--) GLINT: Framebuffer address at 0xe5000000 (--) GLINT: videoram : 4096k <<<<<<<< <<<<< falsch erkannt : hat 8196k (--) GLINT: Using builtin RAMDAC of Permedia 2 chip (--) GLINT: Fitted Memory type is : SGRAM (--) GLINT: VGA core is : Enabled (--) GLINT: Maximum allowed dot-clock: 230.000 MHz (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Cannot support interlaced modes, deleting . (**) GLINT: Cannot support interlaced modes, deleting. (**) GLINT: Mode "640x480": mode clock = 45.800 (**) GLINT: Mode "800x600": mode clock = 60.750 (**) GLINT: Mode "1024x768": mode clock = 75.000 (--) GLINT: There is no mode definition named "1280x1024" (--) GLINT: Removing mode "1280x1024" from list of valid modes. (--) GLINT: Using XAA (XFree86 Acceleration Architecture) (--) GLINT: XAA: Solid filled rectangles (--) GLINT: XAA: Screen-to-screen copy (--) GLINT: XAA: 8x8 pattern fill (--) GLINT: XAA: 8x8 color expand pattern fill (--) GLINT: XAA: Indirect CPU to screen color expansion (imagetext, polytext) (--) GLINT: XAA: Using 8 128x128 areas for pixmap caching (--) GLINT: XAA: Using 16 memory slots for 8x8 mono pattern caching (--) GLINT: XAA: Caching tiles and non-transparent stipples (--) GLINT: XAA: General lines and segments (--) GLX extension module not loaded System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb -xkm -m de -em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml "Errors from xkbcomp are not fatal to the X server" keymap/xfree86 compiled/xfree86.xkm' X Error of failed request: BadDrawable (invalid Pixmap or Window parameter) Major opcode of failed request: 62 (X_CopyArea) Resource id in failed request: 0xc00002 Serial number of failed request: 189 Current serial number in output stream: 189 tail: no process killed X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 4 (X_DestroyWindow) Resource id in failed request: 0x240000f Serial number of failed request: 1225 Current serial number in output stream: 1228 Ich hoffe , jemand kann damit was anfangen . Ansonsten habe ich noch folgendes Problem : Wie kann ich den Kernel beibringen , wieviel RAM ich im Rechner habe ?? Ich habe den Eindruck , daß er das nicht richtig erkennt . Okay , ich danke Euch für Eure Hilfe Bis demnächst Roland -- Um aus der Liste ausgetragen zu werden, eine Mail an majordomo@suse.com schicken, mit dem Text: unsubscribe suse-linux