Ich habe den Kernel 2.6.25.16-0.1 kompiliert und erhalte folgende Fehlermeldung, wenn ich lilo aufrufe (vorab mkinitrd - ergänzend /etc/lilo.conf und /etc/sysconfig/kernel): arju:~ # mkinitrd Scanning scripts ... Resolve dependencies ... Install symlinks in /lib/mkinitrd/setup ... Install symlinks in /lib/mkinitrd/boot ... Kernel image: /boot/vmlinuz-2.6.25.16-0.1-3 Initrd image: /boot/initrd-2.6.25.16-0.1-3 Root device: /dev/disk/by-id/scsi-SATA_WDC_WD400AB-00BWD-WMA7E1469298-part1 (/dev/sda1) (mounted on / as ext3) Resume device: /dev/sda2 Kernel Modules: dock scsi_mod libata pata_via sata_via advansys jbd mbcache ext3 processor thermal fan edd sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd hid usbhid Features: block usb resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 41102 blocks arju:~ # arju:~ # lilo Warning: The initial RAM disk is too big to fit between the kernel and the 15M-16M memory hole. It will be loaded in the highest memory as though the configuration file specified "large-memory" and it will be assumed that the BIOS supports memory moves above 16M. Added Linux ? * Warning: The initial RAM disk is too big to fit between the kernel and the 15M-16M memory hole. It will be loaded in the highest memory as though the configuration file specified "large-memory" and it will be assumed that the BIOS supports memory moves above 16M. Added Failsafe ? arju:~ # /etc/lilo.conf # Modified by YaST2. Last modification on So Okt 12 21:22:52 CEST 2008 menu-scheme = Wb:kw:Wb:Wb timeout = 80 lba32 change-rules reset prompt default = Linux message = /boot/message boot = /dev/disk/by-id/scsi-SATA_WDC_WD400AB-00BWD-WMA7E1469298-part1 image = /boot/vmlinuz-2.6.25.16-0.1-3 ###Don't change this comment - YaST2 identifier: Original name: linux### label = Linux append = " resume=/dev/sda2 splash=silent showopts" vga = 0x31a initrd = /boot/initrd-2.6.25.16-0.1-3 root = /dev/disk/by-id/scsi-SATA_WDC_WD400AB-00BWD-WMA7E1469298-part1 image = /boot/vmlinuz-2.6.25.16-0.1-3 ###Don't change this comment - YaST2 identifier: Original name: failsafe### label = Failsafe append = "showopts ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off x11failsafe" vga = 0x31a initrd = /boot/initrd-2.6.25.16-0.1-3 root = /dev/disk/by-id/scsi-SATA_WDC_WD400AB-00BWD-WMA7E1469298-part1 /etc/sysconfig/kernel (auszugsweise) ## Path: System/Kernel ## Description: ## Type: string ## Command: /sbin/mkinitrd # # This variable contains the list of modules to be added to the initial # ramdisk by calling the script "mkinitrd" # (like drivers for scsi-controllers, for lvm or reiserfs) # INITRD_MODULES="pata_via sata_via advansys jbd ext3 processor thermal fan edd" ## Type: string ## Command: /sbin/mkinitrd # # This variable contains the list of modules to be added to the initial # ramdisk that is created for unprivilegd Xen domains (domU); you may need # drivers for virtual block and network devices in addition to filesystem # and device-mapper modules. # DOMU_INITRD_MODULES="xennet xenblk" ## Type: string ## ServiceRestart: boot.loadmodules # # This variable contains the list of modules to be loaded # once the main filesystem is active # You will find a few default modules for hardware which # can not be detected automatically. # MODULES_LOADED_ON_BOOT="" [ . . . . ] Der Kernel wird gebootet, nur lilo warnt Was ist in 2.6.25.16 * neu oder was hab ich falsch gemacht? Was kann ich tun? Danke Grüße Arno -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org