----- Original Message ----- From: Andreas Loeschner <Andreas.Loeschner@GMX.net> To: <suse-linux@suse.com> Sent: Wednesday, March 15, 2000 9:30 PM Subject: Absturz nach Kopieren
Hi Leuts,
langsam hab ich keine Idee mehr, wo ich suchen soll.
............................
Was kann ich nocht machen???
Ciao Andreas Loeschner AndYL@GMX.net
Hallo nochmal,
hier die Auszuege aus dem Kernel-Log
______ Mar 15 19:22:47 commsrv kernel: scsi : aborting command due to timeout :
6529, scsi0, channel 0, id 1, lun 0 Write (6) 01 93 57 74 00 Mar 15 19:22:47 commsrv kernel: scsi: <fdomain> abort Mar 15 19:22:47 commsrv kernel: Future Domain 16-bit SCSI Driver Version 5.50 Mar 15 19:22:47 commsrv kernel: scsi0: <fdomain> No BIOS; using scsi id 7 Mar 15 19:22:47 commsrv kernel: scsi0: <fdomain> TMC-36C70 (PCI bus) chip at 0x6100 irq 11 Mar 15 19:22:47 commsrv kernel: other (8), target = 1 cmnd = 0x0a pieces = 58 size = 59392 Mar 15 19:22:47 commsrv kernel: sent_command = 6, have_data_in = -1, timeout = 0 Mar 15 19:22:47 commsrv kernel: in_interrupt_flag = 0 Mar 15 19:22:47 commsrv kernel: IMR = 0x14d8, IRR = 0x0000, ISR = 0x0000 Mar 15 19:22:47 commsrv kernel: SCSI Status = 0x11 Mar 15 19:22:47 commsrv kernel: TMC Status = 0xf0 (interrupt) Mar 15 19:22:47 commsrv kernel: Interrupt Status = 0x98 (enabled) Mar 15 19:22:47 commsrv kernel: FIFO Status = 0x08 Mar 15 19:22:47 commsrv kernel: Int. Condition = 0x00 Mar 15 19:22:47 commsrv kernel: Configuration 1 = 0x87 Mar 15 19:22:47 commsrv kernel: Configuration 2 = 0x03 Mar 15 19:23:02 commsrv kernel: scsi : aborting command due to timeout :
____________________________________________________________________________ pid pid
6529, scsi0, channel 0, id 1, lun 0 Write (6) 01 93 57 74 00 Mar 15 19:23:02 commsrv kernel: scsi: <fdomain> abort Mar 15 19:23:02 commsrv kernel: Future Domain 16-bit SCSI Driver Version 5.50 Mar 15 19:23:02 commsrv kernel: scsi0: <fdomain> No BIOS; using scsi id 7 Mar 15 19:23:02 commsrv kernel: scsi0: <fdomain> TMC-36C70 (PCI bus) chip at 0x6100 irq 11 Mar 15 19:23:02 commsrv kernel: arbitration (2), target = 1 cmnd = 0x0a pieces = 58 size = 59392 Mar 15 19:23:02 commsrv kernel: sent_command = 0, have_data_in = 0, timeout = 0 Mar 15 19:23:02 commsrv kernel: in_interrupt_flag = 0 Mar 15 19:23:02 commsrv kernel: IMR = 0x14d8, IRR = 0x0000, ISR = 0x0000 Mar 15 19:23:02 commsrv kernel: SCSI Status = 0x11 Mar 15 19:23:02 commsrv kernel: TMC Status = 0x40 (interrupt) Mar 15 19:23:02 commsrv kernel: Interrupt Status = 0x28 (enabled) Mar 15 19:23:02 commsrv kernel: FIFO Status = 0x08 Mar 15 19:23:02 commsrv kernel: Int. Condition = 0x00 Mar 15 19:23:02 commsrv kernel: Configuration 1 = 0x87 Mar 15 19:23:02 commsrv kernel: Configuration 2 = 0x03
____________________________________________________________________________
______
Hi Leuts, ich hab in der SDB mal nach Timeouts gesucht. Kann es u.U. sein, dass mein Future Domain AHA2920 genau die gleichen Timeouts bringt, wie im Thread: SCSI/AHA2940/Timeouts beschrieben? Dort war als Loesung angeboten, im SCSI-Controler-Setup die Geschwindigkeit runterzusetzen. Ich nutze kein ReiserFS und kann nicht mehr unmounten. Oder versteh ich da was mit SysRQ falsch? Gibts da einen Trick? Ciao Andreas Loeschner AndYL@GMX.net --------------------------------------------------------------------- To unsubscribe, e-mail: suse-linux-unsubscribe@suse.com For additional commands, e-mail: suse-linux-help@suse.com