Hallo zusammen, ich hab hier SuSE-Linux 5.0 mit kernel 2.0.35 und hylafax 4.0pl2 laufen. Als Modem benutze ich ein Creatix SG144 (14.4 KBit) Dieses Modem meldet sich mit Jan 14 12:31:07 router FaxGetty[324]: MODEM ROCKWELL RC32ACL/V1.600-DS29F im syslog (/var/log/messages) Das Modem wurde als Class2 eingestuft und funktioniert auch soweit ... Das Senden eines Faxes ist ueberhaupt kein Problem (siehe attachment). Das Empfangen hab ich dagegen noch NIE hingekriegt : kompletter Bericht aus /var/log/spool/fax/c00000xxx folgt : Dec 08 18:46:26.90: [ 320]: SESSION BEGIN 00000018 49521433902 Dec 08 18:46:26.90: [ 320]: <-- [4:ATA\r] Dec 08 18:46:28.42: [ 320]: --> [3:FAX] Dec 08 18:46:34.62: [ 320]: --> [5:+FCON] Dec 08 18:46:34.62: [ 320]: ANSWER: FAX CONNECTION Dec 08 18:46:34.62: [ 320]: RECV FAX: begin Dec 08 18:49:34.62: [ 320]: REMOTE HANGUP: Unspecified Receive Phase B error (code 70) Dec 08 18:49:34.62: [ 320]: RECV FAX: Unspecified Receive Phase B error Dec 08 18:49:34.62: [ 320]: RECV FAX: end Dec 08 18:49:34.62: [ 320]: SESSION END Hat jemand ne Idee ? Was passiert in den drei Sekunden zwischen "RECV FAX: begin" und "REMOTE HANGUP:...." ? R-) ------------------------------------------------------ Wolf Rüdiger Spielmann Fon.: +49 521 43390-0,-1 Gladbecker Str. 15 Fax.: +49 521 43390-2 33649 Bielefeld/Brackwede LAN : +49 521 43390-3 Funk: +49 171 2345811 eMail : <A HREF="mailto:RSpielmann@vsnet.de">mailto:RSpielmann@vsnet.de</A> Internet : <A HREF="http://www.vsnet.de"><A HREF="http://www.vsnet.de</A">http://www.vsnet.de</A</A>> ------------------------------------------------------ </PRE> <PRE> Dec 07 12:58:19.84: [ 330]: SESSION BEGIN 00000002 4952114 Dec 07 12:58:19.84: [ 330]: SEND FAX: JOB 1 DEST 14 COMMID 00000002 Dec 07 12:58:19.84: [ 330]: DELAY 2600 ms Dec 07 12:58:22.45: [ 330]: <-- [15:ATE0V1Q0S0=0H0\r] Dec 07 12:58:22.60: [ 330]: --> [2:OK] Dec 07 12:58:22.60: [ 330]: <-- [21:ATS8=2S7=60&K3&D2&C1\r] Dec 07 12:58:22.75: [ 330]: --> [2:OK] Dec 07 12:58:22.75: [ 330]: <-- [12:AT+FCLASS=2\r] Dec 07 12:58:22.89: [ 330]: --> [2:OK] Dec 07 12:58:22.89: [ 330]: <-- [10:AT+FTBC=0\r] Dec 07 12:58:23.03: [ 330]: --> [2:OK] Dec 07 12:58:23.03: [ 330]: <-- [10:AT+FBOR=0\r] Dec 07 12:58:23.17: [ 330]: --> [2:OK] Dec 07 12:58:23.17: [ 330]: <-- [13:AT+FPHCTO=30\r] Dec 07 12:58:23.31: [ 330]: --> [2:OK] Dec 07 12:58:23.31: [ 330]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r] Dec 07 12:58:23.46: [ 330]: --> [2:OK] Dec 07 12:58:23.46: [ 330]: <-- [5:ATM0\r] Dec 07 12:58:23.60: [ 330]: --> [2:OK] Dec 07 12:58:23.60: [ 330]: <-- [12:AT+FCLASS=2\r] Dec 07 12:58:23.85: [ 330]: --> [2:OK] Dec 07 12:58:23.85: [ 330]: <-- [10:AT+FTBC=0\r] Dec 07 12:58:24.09: [ 330]: --> [2:OK] Dec 07 12:58:24.09: [ 330]: <-- [10:AT+FBOR=0\r] Dec 07 12:58:24.33: [ 330]: --> [2:OK] Dec 07 12:58:24.33: [ 330]: <-- [13:AT+FPHCTO=30\r] Dec 07 12:58:24.57: [ 330]: --> [2:OK] Dec 07 12:58:24.57: [ 330]: <-- [24:AT+FDCC=1,5,2,2,1,0,0,0\r] Dec 07 12:58:24.82: [ 330]: --> [2:OK] Dec 07 12:58:24.82: [ 330]: <-- [27:AT+FLID="wrs datentechnik"\r] Dec 07 12:58:25.07: [ 330]: --> [2:OK] Dec 07 12:58:25.13: [ 330]: DIAL 14 Dec 07 12:58:25.13: [ 330]: <-- [7:ATDT14\r] Dec 07 12:58:41.21: [ 330]: --> [5:+FCON] Dec 07 12:58:43.10: [ 330]: --> [29:+FCSI: " +49 521 433xxx"] Dec 07 12:58:43.10: [ 330]: REMOTE CSI "+49 521 433xxx" Dec 07 12:58:43.39: [ 330]: --> [22:+FDIS: 1,3,0,2,0,0,0,4] Dec 07 12:58:43.50: [ 330]: --> [2:OK] Dec 07 12:58:43.50: [ 330]: REMOTE best rate 9600 bit/s Dec 07 12:58:43.50: [ 330]: REMOTE max page width 1728 pixels in 215 mm Dec 07 12:58:43.50: [ 330]: REMOTE max unlimited page length Dec 07 12:58:43.50: [ 330]: REMOTE best vres 7.7 line/mm Dec 07 12:58:43.50: [ 330]: REMOTE best format 1-D MR Dec 07 12:58:43.50: [ 330]: REMOTE best 20 ms, 10 ms/scanline Dec 07 12:58:43.50: [ 330]: USE 9600 bit/s Dec 07 12:58:43.50: [ 330]: USE 20 ms, 10 ms/scanline Dec 07 12:58:43.50: [ 330]: SEND file "docq/doc1.ps;00" Dec 07 12:58:43.50: [ 330]: USE page width 1728 pixels in 215 mm Dec 07 12:58:43.50: [ 330]: USE unlimited page length Dec 07 12:58:43.50: [ 330]: USE 3.85 line/mm Dec 07 12:58:43.50: [ 330]: USE 1-D MR Dec 07 12:58:43.50: [ 330]: <-- [24:AT+FDIS=0,3,0,2,0,0,0,4\r] Dec 07 12:58:43.75: [ 330]: --> [2:OK] Dec 07 12:58:43.75: [ 330]: <-- [7:AT+FDT\r] Dec 07 12:58:50.49: [ 330]: --> [22:+FDCS: 0,3,0,2,0,0,0,5] Dec 07 12:58:50.49: [ 330]: --> [7:CONNECT] Dec 07 12:58:50.49: [ 330]: SEND wait for XON Dec 07 12:58:50.49: [ 330]: --> [1:^Q] Dec 07 12:58:50.49: [ 330]: SEND begin page Dec 07 12:58:50.49: [ 330]: <-- data [1030] Dec 07 12:58:50.49: [ 330]: <-- data [1026] Dec 07 12:58:50.49: [ 330]: <-- data [1029] Dec 07 12:58:50.49: [ 330]: <-- data [1025] Dec 07 12:58:50.49: [ 330]: <-- data [364] Dec 07 12:58:51.22: [ 330]: SENT 4459 bytes of data Dec 07 12:58:51.22: [ 330]: <-- data [2] Dec 07 12:58:51.22: [ 330]: SEND end page Dec 07 12:58:58.52: [ 330]: --> [2:OK] Dec 07 12:58:58.52: [ 330]: SEND send EOP (no more pages or documents) Dec 07 12:58:58.52: [ 330]: <-- [9:AT+FET=2\r] Dec 07 12:59:02.26: [ 330]: --> [8:+FPTS: 1] Dec 07 12:59:02.26: [ 330]: SEND recv MCF (message confirmation) Dec 07 12:59:02.26: [ 330]: SEND FAX (00000002): FROM root@router.galaxy.de TO 14 (page 1 of 1 sent in 0:19) Dec 07 12:59:02.26: [ 330]: SEND FAX (00000002): FROM root@router.galaxy.de TO 14 (docq/doc1.ps;00 sent in 0:19) Dec 07 12:59:02.26: [ 330]: <-- [5:ATH0\r] Dec 07 12:59:03.96: [ 330]: --> [8:+FHNG: 0] Dec 07 12:59:03.96: [ 330]: REMOTE HANGUP: Normal and proper end of connection (code 0) Dec 07 12:59:04.98: [ 330]: --> [2:OK] Dec 07 12:59:04.98: [ 330]: SESSION END