Am Samstag, 30. August 2003 23:05 schrieb Andreas Winkelmann:
Wenn Du acpi=off benutzen musst, damit Dein System sauber funktioniert, unterstützt Dein Mainboard den ACPI-Standard nicht ordnungsgemäss.
Ja da habe ich schon Fehlermeldungen gesehen. Fakt ist aber, dass mit dem Vanilla-Kernel das Netzwerk funktioniert, ohne, dass ich acpi=off definiere. Bei Epox wird zum EP-8K9A9+ kein Bios-Download angeboten, also nehme ich an, dass es bis jetzt auch kein besseres gibt, als das ursprüngliche. Ich werden Support mal mit dem Problem "likely buggy ACPI BIOS" konfrontieren. In boot.msg findet man mehr Infos: <4>ENABLING IO-APIC IRQs <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 16. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178003 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0003 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 0FF 0F 0 0 0 0 0 1 1 39 <7> 02 0FF 0F 0 0 0 0 0 1 1 31 <7> 03 0FF 0F 0 0 0 0 0 1 1 41 <7> 04 0FF 0F 0 0 0 0 0 1 1 49 <7> 05 0FF 0F 0 0 0 0 0 1 1 51 <7> 06 0FF 0F 0 0 0 0 0 1 1 59 <7> 07 0FF 0F 0 0 0 0 0 1 1 61 <7> 08 0FF 0F 0 0 0 0 0 1 1 69 <7> 09 0FF 0F 0 0 0 0 0 1 1 71 <7> 0a 0FF 0F 0 0 0 0 0 1 1 79 <7> 0b 0FF 0F 0 0 0 0 0 1 1 81 <7> 0c 0FF 0F 0 0 0 0 0 1 1 89 <7> 0d 0FF 0F 0 0 0 0 0 1 1 91 <7> 0e 0FF 0F 0 0 0 0 0 1 1 99 <7> 0f 0FF 0F 0 0 0 0 0 1 1 A1 <7> 10 000 00 1 0 0 0 0 0 0 00 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 000 00 1 0 0 0 0 0 0 00 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 000 00 1 0 0 0 0 0 0 00 <7> 15 000 00 1 0 0 0 0 0 0 00 <7> 16 000 00 1 0 0 0 0 0 0 00 <7> 17 000 00 1 0 0 0 0 0 0 00 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 1999.7771 MHz. <4>..... host bus clock speed is 266.6369 MHz. <4>cpu: 0, clocks: 2666369, slice: 1333184 <4>CPU0<T0:2666368,T1:1333184,D:0,S:1333184,C:2666369> <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <6>ACPI: Subsystem revision 20030813 <6>PCI: PCI BIOS revision 2.10 entry at 0xfb350, last bus=1 <6>PCI: Using configuration type 1 <6>ACPI: Interpreter enabled <6>ACPI: Using IOAPIC for interrupt routing <6>ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) <6>ACPI: PCI Root Bridge [PCI0] (00:00) <4>PCI: Probing PCI hardware (bus 00) <7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] <4>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) <4>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) <4>ACPI: PCI Interrupt Link [ALKA] (IRQs 20, disabled) <4>ACPI: PCI Interrupt Link [ALKB] (IRQs 21, disabled) <4>ACPI: PCI Interrupt Link [ALKC] (IRQs 22, disabled) <4>ACPI: PCI Interrupt Link [ALKD] (IRQs 23, disabled) <6>PCI: Probing PCI hardware <7>IOAPIC[0]: Set PCI routing entry (2-16 -> 0xa9 -> IRQ 16 Mode:1 Active:1) <7>00:00:08[A] -> 2-16 -> IRQ 16 <7>IOAPIC[0]: Set PCI routing entry (2-17 -> 0xb1 -> IRQ 17 Mode:1 Active:1) <7>00:00:08[B] -> 2-17 -> IRQ 17 <7>IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb9 -> IRQ 18 Mode:1 Active:1) <7>00:00:08[C] -> 2-18 -> IRQ 18 <7>IOAPIC[0]: Set PCI routing entry (2-19 -> 0xc1 -> IRQ 19 Mode:1 Active:1) <7>00:00:08[D] -> 2-19 -> IRQ 19 <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-19 already programmed <7>Pin 2-16 already programmed <7>Pin 2-16 already programmed <7>Pin 2-16 already programmed <4>ACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKA] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKC] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/n<7>Pin 2-16 already programmed <7>Pin 2-17 already programmed <7>Pin 2-18 already programmed <7>Pin 2-19 already programmed <4>ACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKD] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <3>ERROR: Unable to locate IOAPIC for IRQ -19/nACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <4>ACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <4>ACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <4>ACPI: Unable to set IRQ for PCI Interrupt Link [ALKB] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <4>ACPI: Unable to set IRQ for PCI Interrupt Link [ALKA] (likely buggy ACPI BIOS). Aborting ACPI-based IRQ routing. Try pci=noacpi or acpi=off <6>PCI: Using ACPI for IRQ routing <6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' <6>PCI: Via IRQ fixup for 00:10.0, from 10 to 13 <6>PCI: Via IRQ fixup for 00:10.1, from 11 to 13 <6>PCI: Via IRQ fixup for 00:10.2, from 5 to 13 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) <5>apm: overridden by ACPI.