openSUSE Recommended Update: Recommended update for raspberrypi-eeprom ______________________________________________________________________________ Announcement ID: openSUSE-RU-2022:0652-1 Rating: moderate References: #1194950 Affected Products: openSUSE Leap 15.3 openSUSE Leap 15.4 ______________________________________________________________________________ An update that has one recommended fix can now be installed. Description: This update for raspberrypi-eeprom fixes the following issues: Update to version 2021.04.29 (bsc#1194950) - Use upstream version schema (year.month.day) instead of arbitrary 0.0 - Add support for NVMe to the bootloader with a new NVMe boot mode - Add support for [cm4] and [pi400] config conditionals filters - TFTP - reply to duplicate ACKS - Skip rendering of HDMI diagnostics display for the first 8 seconds unless an error occurs - Add support for the BCM2711 XHCI controller - BOOT_ORDER 0x5 - Add XHCI protocol layer fixes for non-VLI controllers - Avoid USB MSD timeout of there is only one device - Fix recovery.bin error handler so that the LED error pattern is still displayed even if HDMI or SDRAM fail - Fix GPIO expander reset issue on some Pi4B 1.1 to 1.3 boards - Fix regression for GPIO expander reset change which caused PMIC reset to get card out of 1V8 mode to be missed - Timeout USB MSD commands and move to the next boot mode if a device stops responding - Add support for booting from the BCM2711 XHCI controller which is the USB-C socket on Pi 4B / Pi 400 and the type A sockets on Compute Module 4 IO board - Validate SDRAM in recovery mode Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.4: zypper in -t patch openSUSE-SLE-15.4-2022-652=1 - openSUSE Leap 15.3: zypper in -t patch openSUSE-SLE-15.3-2022-652=1 Package List: - openSUSE Leap 15.4 (noarch): raspberrypi-eeprom-2021.04.29-150300.3.3.1 raspberrypi-eeprom-firmware-2021.04.29-150300.3.3.1 - openSUSE Leap 15.3 (noarch): raspberrypi-eeprom-2021.04.29-150300.3.3.1 raspberrypi-eeprom-firmware-2021.04.29-150300.3.3.1 References: https://bugzilla.suse.com/1194950