openSUSE Recommended Update: Security update for the Linux Kernel ______________________________________________________________________________ Announcement ID: openSUSE-RU-2018:2300-1 Rating: moderate References: #1051510 #1051979 #1077761 #1086274 #1099858 #1100132 #1101331 #1101669 #1102633 #1102658 #1103917 #1103920 #1103948 #1103949 #1104111 #1104174 Affected Products: openSUSE Leap 15.0 ______________________________________________________________________________ An update that has 16 recommended fixes can now be installed. Description: The openSUSE Leap 15.0 was updated to receive various security and bugfixes. The following non-security bugs were fixed: - acpi / lpss: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2 (bsc#1051510). - af_key: Always verify length of provided sadb_key (bsc#1051510). - af_key: fix buffer overread in parse_exthdrs() (bsc#1051510). - af_key: fix buffer overread in verify_address_len() (bsc#1051510). - agp: uninorth: make two functions static (bsc#1051510). - arm: 8715/1: add a private asm/unaligned.h (bsc#1051510). - arm: 8720/1: ensure dump_instr() checks addr_limit (bsc#1051510). - arm: 8721/1: mm: dump: check hardware RO bit for LPAE (bsc#1051510). - arm: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE (bsc#1051510). - arm: 8731/1: Fix csum_partial_copy_from_user() stack mismatch (bsc#1051510). - arm: 8743/1: bL_switcher: add MODULE_LICENSE tag (bsc#1051510). - arm: 8746/1: vfp: Go back to clearing vfp_current_hw_state[] (bsc#1051510). - arm: 8748/1: mm: Define vdso_start, vdso_end as array (bsc#1051510). - arm: 8753/1: decompressor: add a missing parameter to the addruart macro (bsc#1051510). - arm: 8758/1: decompressor: restore r1 and r2 just before jumping to the kernel (bsc#1051510). - arm: 8764/1: kgdb: fix NUMREGBYTES so that gdb_regs[] is the correct size (bsc#1051510). - arm: 8769/1: kprobes: Fix to use get_kprobe_ctlblk after irq-disabed (bsc#1051510). - arm: 8770/1: kprobes: Prohibit probing on optimized_callback (bsc#1051510). - arm: 8771/1: kprobes: Prohibit kprobes on do_undefinstr (bsc#1051510). - arm: 8772/1: kprobes: Prohibit kprobes on get_user functions (bsc#1051510). - arm: AM33xx: PRM: Remove am33xx_pwrdm_read_prev_pwrst function (bsc#1051510). - arm: amba: Fix race condition with driver_override (bsc#1051510). - arm: amba: Fix wrong indentation in driver_override_store() (bsc#1051510). - arm: amba: Make driver_override output consistent with other buses (bsc#1051510). - arm: at91: do not select CONFIG_ARM_CPU_SUSPEND for old platforms (bsc#1051510). - arm: avoid faulting on qemu (bsc#1051510). - arm: BUG if jumping to usermode address in kernel mode (bsc#1051510). - arm-ccn: perf: Prevent module unload while PMU is in use (bsc#1051510). - arm: davinci: Add dma_mask to dm365's eDMA device (bsc#1051510). - arm: davinci: board-da830-evm: fix GPIO lookup for MMC/SD (bsc#1051510). - arm: davinci: board-da850-evm: fix GPIO lookup for MMC/SD (bsc#1051510). - arm: davinci: board-da850-evm: fix WP pin polarity for MMC/SD (bsc#1051510). - arm: davinci: board-dm355-evm: fix broken networking (bsc#1051510). - arm: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF (bsc#1051510). - arm: davinci: board-dm646x-evm: set VPIF capture card name (bsc#1051510). - arm: davinci: board-omapl138-hawk: fix GPIO numbers for MMC/SD lookup (bsc#1051510). - arm: davinci: dm646x: fix timer interrupt generation (bsc#1051510). - arm: davinci: fix mmc entries in dm365's dma_slave_map (bsc#1051510). - arm: davinci: fix the GPIO lookup for omapl138-hawk (bsc#1051510). - arm: davinci: Use platform_device_register_full() to create pdev for dm365's eDMA (bsc#1051510). - arm: DRA722: remove redundant definition of 1.0 device (bsc#1051510). - arm: fix return value of parse_cpu_capacity (bsc#1051510). - arm: kexec: fix failure to boot crash kernel (bsc#1051510). - arm: kexec: fix kdump register saving on panic() (bsc#1051510). - arm: keystone: fix platform_domain_notifier array overrun (bsc#1051510). - arm: kvm: fix building with gcc-8 (bsc#1051510). - arm: multi_v7_defconfig: Replace DRM_RCAR_HDMI by generic bridge options (bsc#1051510). - arm: multi_v7_defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD (bsc#1051510). - arm: mvebu: Fix broken PL310_ERRATA_753970 selects (bsc#1051510). - arm: OMAP1: clock: Fix debugfs_create_*() usage (bsc#1051510). - arm: OMAP2+: Fix SRAM virt to phys translation for save_secure_ram_context (bsc#1051510). - arm: omap2: hide omap3_save_secure_ram on non-OMAP3 builds (bsc#1051510). - arm: OMAP2+: omap_device: drop broken RPM status update from suspend_noirq (bsc#1051510). - arm: OMAP2+: powerdomain: use raw_smp_processor_id() for trace (bsc#1051510). - arm: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt (bsc#1051510). - arm: OMAP3: Fix prm wake interrupt for resume (bsc#1051510). - arm: OMAP3: hwmod_data: add missing module_offs for MMC3 (bsc#1051510). - arm: OMAP3+: PRM: fix of_irq_get() result check (bsc#1051510). - arm: OMAP4+: PRM: fix of_irq_get() result checks (bsc#1051510). - arm: OMAP: Fix dmtimer init for omap1 (bsc#1051510). - arm: OMAP: Fix SRAM W+X mapping (bsc#1051510). - arm: orion5x: Revert commit 4904dbda41c8 (bsc#1051510). - arm: orion: fix orion_ge00_switch_board_info initialization (bsc#1051510). - arm: pxa: select both FB and FB_W100 for eseries (bsc#1051510). - arm: pxa/tosa-bt: add MODULE_LICENSE tag (bsc#1051510). - arm: remove wrong CONFIG_PROC_SYSCTL ifdef (bsc#1051510). - arm: s3c24xx: Fix NAND ECC mode for mini2440 board (bsc#1051510). - arm: shmobile: defconfig: Enable missing PCIE_RCAR dependency (bsc#1051510). - arm: shmobile: defconfig: Replace DRM_RCAR_HDMI by generic bridge options (bsc#1051510). - arm: shmobile: defconfig: Replace SND_SOC_RSRC_CARD by SND_SIMPLE_SCU_CARD (bsc#1051510). - arm: shmobile: defconfig: Replace USB_XHCI_RCAR by USB_XHCI_PLATFORM (bsc#1051510). - arm: shmobile: rcar-gen2: Fix deadlock in regulator quirk (bsc#1051510). - arm: socfpga_defconfig: Remove QSPI Sector 4K size force (bsc#1051510). - arm: spear13xx: Fix dmas cells (bsc#1051510). - arm: sunxi_defconfig: Enable CMA (bsc#1051510). - arm: sunxi: fix the core number of V3s in sunxi README (bsc#1051510). - ata: do not schedule hot plug if it is a sas host (). - audit: fix potential null dereference 'context->module.name' (bsc#1051510). - cachefiles: Fix missing clear of the CACHEFILES_OBJECT_ACTIVE flag (bsc#1099858). - cachefiles: Fix refcounting bug in backing-file read monitoring (bsc#1099858). - cachefiles: Wait rather than BUG'ing on "Unexpected object collision" (bsc#1099858). - can: dev: increase bus-off message severity (bsc#1051510). - can: ems_usb: Fix memory leak on ems_usb_disconnect() (bsc#1051510). - can: m_can: change comparison to bitshift when dealing with a mask (bsc#1051510). - clk: at91: fix clk-generated compilation (bsc#1051510). - clk: renesas: cpg-mssr: Stop using printk format %pCr (bsc#1051510). - coccinelle: fix parallel build with CHECK=scripts/coccicheck (bsc#1051510). - crypto: authenc - do not leak pointers to authenc keys (bsc#1051510). - crypto: authencesn - do not leak pointers to authenc keys (bsc#1051510). - crypto: padlock-aes - Fix Nano workaround data corruption (bsc#1051510). - dm: prevent DAX mounts if not supported (bsc#1103917). - doc: Add vendor prefix for Kieback & Peter GmbH (bsc#1051510). - drm/atomic: Make atomic helper track newly assigned planes correctly, v2 (bsc#1051510). - drm/atomic: Make atomic iterators less surprising (bsc#1051510). - fs: allow per-device dax status checking for filesystems (bsc#1103917). - fscache: Allow cancelled operations to be enqueued (bsc#1099858). - fscache: Fix reference overput in fscache_attach_object() error handling (bsc#1099858). - hv_netvsc: Ensure correct teardown message sequence order (). - hv/netvsc: fix handling of fallback to single queue mode (). - hv_netvsc: Fix net device attach on older Windows hosts (). - hv_netvsc: set master device (bsc#1051979). - hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl() (). - hv_netvsc: split sub-channel setup into async and sync (). - hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown (). - ibmasm: do not write out of bounds in read handler (bsc#1051510). - ibmvnic: Remove code to request error information (bsc#1104174). - ibmvnic: Revise RX/TX queue error messages (bsc#1101331). - ibmvnic: Update firmware error reporting with cause string (bsc#1104174). - irqchip: brcmstb-l2: Define an irq_pm_shutdown function (bsc#1051510). - irqchip/gic: Take lock when updating irq type (bsc#1051510). - irqchip/gic-v3: Change pr_debug message to pr_devel (bsc#1051510). - irqchip/gic-v3: Fix the driver probe() fail due to disabled GICC entry (bsc#1051510). - irqchip/gic-v3: Ignore disabled ITS nodes (bsc#1051510). - irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() (bsc#1051510). - irqchip/qcom: Fix check for spurious interrupts (bsc#1051510). - irqchip/qcom: Fix u32 comparison with value less than zero (bsc#1051510). - iwlwifi: add more card IDs for 9000 series (bsc#1051510). - kabi protect bdev_dax_supported (bsc#1103917). - kabi protect structy ata_host (git-fixes). - kabi/severities: do not complain on hisi_sas internal changes (). - kbuild: add '-fno-stack-check' to kernel build options (bsc#1051510). - kbuild: Handle builtin dtb file names containing hyphens (bsc#1051510). - kbuild: pkg: use --transform option to prefix paths in tar (bsc#1051510). - kconfig: display recursive dependency resolution hint just once (bsc#1051510). - kmemleak: add scheduling point to kmemleak_scan() (bsc#1051510). - kvm: SVM: Add pause filter threshold (). - kvm: SVM: Implement pause loop exit logic in SVM (). - kvm: VMX: Bring the common code to header file (). - kvm: VMX: Fix the module parameters for vmx (). - kvm: VMX: Remove ple_window_actual_max (). - libata: add refcounting to ata_host (git-fixes). - libata: ensure host is free'd on error exit paths (git-fixes). - libnvdimm, dimm: fix dpa reservation vs uninitialized label area (git-fixes). - linvdimm, pmem: Preserve read-only setting for pmem devices (git-fixes). - MAINTAINERS: review Renesas DT bindings as well (bsc#1051510). - mfd: cros_ec: Fail early if we cannot identify the EC (bsc#1051510). - mfd: fsl-imx25: Clean up irq settings during removal (bsc#1051510). - mfd: mxs-lradc: Fix error handling in mxs_lradc_probe() (bsc#1051510). - misc: pci_endpoint_test: Avoid triggering a BUG() (bsc#1051510). - mm/kmemleak.c: make cond_resched() rate-limiting more efficient (bsc#1051510). - nohz: Fix local_timer_softirq_pending() (bsc#1051510). - nvme: ensure forward progress during Admin passthru (git-fixes). - nvme-fabrics: Ignore nr_io_queues option for discovery controllers (bsc#1102633). - nvme: fixup crash on failed discovery (bsc#1103920). - nvme.h: fixup ANA group descriptor format (bsc#1104111). - nvme: use hw qid in trace events (bsc#1102633). - pinctrl: intel: Add Intel Lewisburg GPIO support (). - pinctrl: nand: meson-gxl: fix missing data pins (bsc#1051510). - pmem: only set QUEUE_FLAG_DAX for fsdax mode (bsc#1103917). - sc16is7xx: Check for an error when the clock is enabled (bsc#1051510). - sched/fair: Consider RT/IRQ pressure in capacity_spare_wake() (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Fix find_idlest_group() when local group is not allowed (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Fix usage of find_idlest_group() when no groups are allowed (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Fix usage of find_idlest_group() when the local group is idlest (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Move select_task_rq_fair() slow-path into its own function (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Remove impossible condition from find_idlest_group_cpu() (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Remove unnecessary comparison with -1 (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Spare idle load balancing on nohz_full CPUs (bnc#1101669 optimise numa balancing for fast migrate). - sched/fair: Use 'unsigned long' for utilization, consistently (bnc#1101669 optimise numa balancing for fast migrate). - scsi: ata: enhance the definition of SET MAX feature field value (). - scsi: hisi_sas: add an mechanism to do reset work synchronously (). - scsi: hisi_sas: add check of device in hisi_sas_task_exec() (). - scsi: hisi_sas: add internal abort dev in some places (). - scsi: hisi_sas: Add LED feature for v3 hw (). - scsi: hisi_sas: add RAS feature for v3 hw (). - scsi: hisi_sas: add readl poll timeout helper wrappers (). - scsi: hisi_sas: Add some checks to avoid free'ing a sas_task twice (). - scsi: hisi_sas: add some print to enhance debugging (). - scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command (). - scsi: hisi_sas: add v2 hw port AXI error handling support (). - scsi: hisi_sas: add v3 hw MODULE_DEVICE_TABLE() (). - scsi: hisi_sas: add v3 hw suspend and resume (). - scsi: hisi_sas: allocate slot buffer earlier (). - scsi: hisi_sas: Change common allocation mode of device id (). - scsi: hisi_sas: Change frame type for SET MAX commands (). - scsi: hisi_sas: change ncq process for v3 hw (). - scsi: hisi_sas: change slot index allocation mode (). - scsi: hisi_sas: check host frozen before calling "done" function (). - scsi: hisi_sas: check IPTT is valid before using it for v3 hw (). - scsi: hisi_sas: check sas_dev gone earlier in hisi_sas_abort_task() (). - scsi: hisi_sas: Code cleanup and minor bug fixes (). - scsi: hisi_sas: config ATA de-reset as an constrained command for v3 hw (). - scsi: hisi_sas: consolidate command check in hisi_sas_get_ata_protocol() (). - scsi: hisi_sas: Create a scsi_host_template per HW module (). - scsi: hisi_sas: delete timer when removing hisi_sas driver (). - scsi: hisi_sas: do link reset for some CHL_INT2 ints (). - scsi: hisi_sas: Do not lock DQ for complete task sending (). - scsi: hisi_sas: dt-bindings: add an property of signal attenuation (). - scsi: hisi_sas: fix a bug in hisi_sas_dev_gone() (). - scsi: hisi_sas: fix a typo in hisi_sas_task_prep() (). - scsi: hisi_sas: fix dma_unmap_sg() parameter (). - scsi: hisi_sas: fix PI memory size (). - scsi: hisi_sas: fix return value of hisi_sas_task_prep() (). - scsi: hisi_sas: Fix return value when get_free_slot() failed (). - scsi: hisi_sas: fix SAS_QUEUE_FULL problem while running IO (). - scsi: hisi_sas: fix the issue of link rate inconsistency (). - scsi: hisi_sas: fix the issue of setting linkrate register (). - scsi: hisi_sas: improve int_chnl_int_v2_hw() consistency with v3 hw (). - scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot (). - scsi: hisi_sas: increase timer expire of internal abort task (). - scsi: hisi_sas: Init disks after controller reset (). - scsi: hisi_sas: initialize dq spinlock before use (). - scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate() (). - scsi: hisi_sas: judge result of internal abort (). - scsi: hisi_sas: make local symbol host_attrs static (). - scsi: hisi_sas: make return type of prep functions void (). - scsi: hisi_sas: make SAS address of SATA disks unique (). - scsi: hisi_sas: Mark PHY as in reset for nexus reset (). - scsi: hisi_sas: modify hisi_sas_dev_gone() for reset (). - scsi: hisi_sas: modify some register config for hip08 (). - scsi: hisi_sas: optimise port id refresh function (). - scsi: hisi_sas: optimise the usage of DQ locking (). - scsi: hisi_sas: print device id for errors (). - scsi: hisi_sas: re-add the lldd_port_deformed() (). - scsi: hisi_sas: relocate clearing ITCT and freeing device (). - scsi: hisi_sas: relocate smp sg map (). - scsi: hisi_sas: Remove depends on HAS_DMA in case of platform dependency (). - scsi: hisi_sas: remove redundant handling to event95 for v3 (). - scsi: hisi_sas: remove some unneeded structure members (). - scsi: hisi_sas: remove unused variable hisi_sas_devices.running_req (). - scsi: hisi_sas: Reset disks when discovered (). - scsi: hisi_sas: some optimizations of host controller reset (). - scsi: hisi_sas: stop controller timer for reset (). - scsi: hisi_sas: support the property of signal attenuation for v2 hw (). - scsi: hisi_sas: Terminate STP reject quickly for v2 hw (). - scsi: hisi_sas: Try wait commands before before controller reset (). - scsi: hisi_sas: update PHY linkrate after a controller reset (). - scsi: hisi_sas: update RAS feature for later revision of v3 HW (). - scsi: hisi_sas: use an general way to delay PHY work (). - scsi: hisi_sas: Use device lock to protect slot alloc/free (). - scsi: hisi_sas: use dma_zalloc_coherent() (). - scsi: hisi_sas: workaround a v3 hw hilink bug (). - scsi: libsas: defer ata device eh commands to libata (). - scsi: lpfc: Add Buffer overflow check, when nvme_info larger than PAGE_SIZE (bsc#1102658). - scsi: lpfc: Correct LCB ACCept payload (bsc#1102658). - scsi: lpfc: devloss timeout race condition caused null pointer reference (bsc#1102658). - scsi: lpfc: Fix abort error path for NVMET (bsc#1102658). - scsi: lpfc: Fix driver crash when re-registering NVME rports (bsc#1102658). - scsi: lpfc: Fix driver not setting dpp bits correctly in doorbell word (bsc#1102658). - scsi: lpfc: Fix ELS abort on SLI-3 adapters (bsc#1102658). - scsi: lpfc: Fix list corruption on the completion queue (bsc#1102658). - scsi: lpfc: Fix NVME Target crash in defer rcv logic (bsc#1102658). - scsi: lpfc: Fix panic if driver unloaded when port is offline (bsc#1102658). - scsi: lpfc: Fix sysfs Speed value on CNA ports (bsc#1102658). - scsi: lpfc: Limit tracking of tgt queue depth in fast path (bsc#1102658). - scsi: lpfc: Make PBDE optimizations configurable (bsc#1102658). - scsi: lpfc: Remove lpfc_enable_pbde as module parameter (bsc#1102658). - scsi: lpfc: Revise copyright for new company language (bsc#1102658). - scsi: lpfc: Support duration field in Link Cable Beacon V1 command (bsc#1102658). - scsi: lpfc: update driver version to 12.0.0.5 (bsc#1102658). - scsi: lpfc: update driver version to 12.0.0.6 (bsc#1102658). - scsi: qla2xxx: Avoid double completion of abort command (git-fixes). - scsi: qla2xxx: Fix driver unload by shutting down chip (git-fixes). - scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion (git-fixes). - scsi: qla2xxx: Fix NULL pointer dereference for fcport search (git-fixes). - scsi: qla2xxx: Fix unintialized List head crash (git-fixes). - scsi: qla2xxx: Return error when TMF returns (git-fixes). - scsi: smartpqi: add in new supported controllers (bsc#1086274). - scsi: smartpqi: add inspur advantech ids (bsc#1086274). - scsi: smartpqi: bump driver version to 1.1.4-130 (bsc#1086274). - scsi: smartpqi: fix critical ARM issue reading PQI index registers (bsc#1086274). - scsi: smartpqi: improve error checking for sync requests (bsc#1086274). - scsi: smartpqi: improve handling for sync requests (bsc#1086274). - scsi: smartpqi: update driver version (bsc#1086274). - scsi: smartpqi: workaround fw bug for oq deletion (bsc#1086274). - sctp: fix the issue that pathmtu may be set lower than MINSEGMENT (git-fixes). - sctp: introduce sctp_dst_mtu (git-fixes). - sr: pass down correctly sized SCSI sense buffer (git-fixes). - staging: ks7010: Use constants from ieee80211_eid instead of literal ints (bsc#1051510). - staging: speakup: fix wraparound in uaccess length check (bsc#1051510). - sysrq : fix Show Regs call trace on ARM (bsc#1051510). - typec: tcpm: Fix a msecs vs jiffies bug (bsc#1100132). - Update patches.arch/KVM-PPC-Check-if-IOMMU-page-is-contained-in-the-pinn.patch (bsc#1077761, git-fixes, bsc#1103948, bsc#1103949). - x86: Treat R_X86_64_PLT32 as R_X86_64_PC32 (binutils_2.31). Patch Instructions: To install this openSUSE Recommended Update use the SUSE recommended installation methods like YaST online_update or "zypper patch". Alternatively you can run the command listed for your product: - openSUSE Leap 15.0: zypper in -t patch openSUSE-2018-858=1 Package List: - openSUSE Leap 15.0 (noarch): kernel-devel-4.12.14-lp150.12.13.1 kernel-docs-4.12.14-lp150.12.13.1 kernel-docs-html-4.12.14-lp150.12.13.1 kernel-macros-4.12.14-lp150.12.13.1 kernel-source-4.12.14-lp150.12.13.1 kernel-source-vanilla-4.12.14-lp150.12.13.1 - openSUSE Leap 15.0 (x86_64): kernel-debug-4.12.14-lp150.12.13.1 kernel-debug-base-4.12.14-lp150.12.13.1 kernel-debug-base-debuginfo-4.12.14-lp150.12.13.1 kernel-debug-debuginfo-4.12.14-lp150.12.13.1 kernel-debug-debugsource-4.12.14-lp150.12.13.1 kernel-debug-devel-4.12.14-lp150.12.13.1 kernel-debug-devel-debuginfo-4.12.14-lp150.12.13.1 kernel-default-4.12.14-lp150.12.13.1 kernel-default-base-4.12.14-lp150.12.13.1 kernel-default-base-debuginfo-4.12.14-lp150.12.13.1 kernel-default-debuginfo-4.12.14-lp150.12.13.1 kernel-default-debugsource-4.12.14-lp150.12.13.1 kernel-default-devel-4.12.14-lp150.12.13.1 kernel-default-devel-debuginfo-4.12.14-lp150.12.13.1 kernel-kvmsmall-4.12.14-lp150.12.13.1 kernel-kvmsmall-base-4.12.14-lp150.12.13.1 kernel-kvmsmall-base-debuginfo-4.12.14-lp150.12.13.1 kernel-kvmsmall-debuginfo-4.12.14-lp150.12.13.1 kernel-kvmsmall-debugsource-4.12.14-lp150.12.13.1 kernel-kvmsmall-devel-4.12.14-lp150.12.13.1 kernel-kvmsmall-devel-debuginfo-4.12.14-lp150.12.13.1 kernel-obs-build-4.12.14-lp150.12.13.1 kernel-obs-build-debugsource-4.12.14-lp150.12.13.1 kernel-obs-qa-4.12.14-lp150.12.13.1 kernel-syms-4.12.14-lp150.12.13.1 kernel-vanilla-4.12.14-lp150.12.13.1 kernel-vanilla-base-4.12.14-lp150.12.13.1 kernel-vanilla-base-debuginfo-4.12.14-lp150.12.13.1 kernel-vanilla-debuginfo-4.12.14-lp150.12.13.1 kernel-vanilla-debugsource-4.12.14-lp150.12.13.1 kernel-vanilla-devel-4.12.14-lp150.12.13.1 kernel-vanilla-devel-debuginfo-4.12.14-lp150.12.13.1 References: https://bugzilla.suse.com/1051510 https://bugzilla.suse.com/1051979 https://bugzilla.suse.com/1077761 https://bugzilla.suse.com/1086274 https://bugzilla.suse.com/1099858 https://bugzilla.suse.com/1100132 https://bugzilla.suse.com/1101331 https://bugzilla.suse.com/1101669 https://bugzilla.suse.com/1102633 https://bugzilla.suse.com/1102658 https://bugzilla.suse.com/1103917 https://bugzilla.suse.com/1103920 https://bugzilla.suse.com/1103948 https://bugzilla.suse.com/1103949 https://bugzilla.suse.com/1104111 https://bugzilla.suse.com/1104174