Author: minton
Date: 2015-08-30 20:09:18 +0200 (Sun, 30 Aug 2015)
New Revision: 92404
Modified:
trunk/yast/ru/po/drbd.ru.po
Log:
Merged drbd.pot for ru
Modified: trunk/yast/ru/po/drbd.ru.po
===================================================================
--- trunk/yast/ru/po/drbd.ru.po 2015-08-30 18:09:16 UTC (rev 92403)
+++ trunk/yast/ru/po/drbd.ru.po 2015-08-30 18:09:18 UTC (rev 92404)
@@ -10,7 +10,7 @@
msgstr ""
"Project-Id-Version: drbd.ru\n"
"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-10-29 16:20+0100\n"
+"POT-Creation-Date: 2015-08-25 18:36+0200\n"
"PO-Revision-Date: 2014-11-17 00:22+0400\n"
"Last-Translator: Alexander Melentev \n"
"Language-Team: Russian \n"
@@ -74,10 +74,16 @@
msgstr "Настройка ресурсов"
#: src/include/drbd/common.rb:47
+#, fuzzy
+#| msgid "DRBD Configuration"
+msgid "LVM Configuration"
+msgstr "Настройка DRBD"
+
+#: src/include/drbd/common.rb:48
msgid "Resource Basic Configuration"
msgstr "Основные настройки ресурсов"
-#: src/include/drbd/common.rb:48
+#: src/include/drbd/common.rb:49
msgid "Resource Advanced Configuration"
msgstr "Расширенные настройки ресурсов"
@@ -253,7 +259,7 @@
"\n"
"\t\t<p>\"Name\" is mandatory and must match the Linux host name (uname -n) of one of the nodes. Should not include \".\" in hostname.</p>\n"
"\t\t<p>\"Address:Port\": A resource needs one IP address per device, which is used to wait for incoming connections from the partner device to reach the device. Each DRBD resource needs a TCP port which is used to connect to the node's partner device.</p>\n"
-"\t\t<p>\"Device\": The name of the block device node of the resource being described. You must use this device with your application (file system) and you must not use the low level block device which is specified with the disk parameter,following its minor number. Or either omit the name or minor and the minor number. If you omit the name a default of /dev/drbdminor will be used.\n"
+"\t\t<p>\"Device\": The name of the block device node of the resource being described. You must use this device with your application (file system) and you must not use the low level block device which is specified with the disk parameter,following its minor number. Otherwise, you may omit the name, or the word minor and its number. If you omit the name a default of /dev/drbd'minor number' will be used.\n"
"\t\tLike: '/dev/drbd{service} minor {minor drbd number [0...255]}' or '/dev/drbd{minor drbd number [0...255]}'</p>\n"
"\t\t<p>\"Disk\": DRBD uses this block device to actually store and retrieve the data. Never access such a device while DRBD is running on top of it.</p>\n"
"\t\t<p>\"Meta-disk\": internal. Internal means that the last part of the backing device is used to store the meta-data.</p>\n"
@@ -317,14 +323,34 @@
"\t\t"
#: src/include/drbd/helps.rb:112
+#, fuzzy
+#| msgid "<p><b><big>Global Configuration of DRBD</big></b></p>"
+msgid "<p><b><big>LVM Configuration</big></b></p>"
+msgstr "<p><b><big>Общие настройки DRBD</big></b></p>"
+
+#: src/include/drbd/helps.rb:115
+msgid ""
+"\n"
+"\t\t<p><b>LVM configuration file /etc/lvm/lvm.conf</b></p>\n"
+"\t\t<p>To use LVM with DRBD, it is necessary to change some options in the LVM configuration file and to remove stale cache entries on the nodes.</p>\t\t<p>Refer to 'man lvm.conf' for further information including the file layout.</p>\n"
+"\t\t\t\t\t\t\t\t\t\t \n"
+"\t\t<p><b>Device Filter</b>: This masks the underlying block device from the list of devices LVM scans for Physical Volume signatures. This way, LVM is instructed to read Physical Volume signatures from DRBD devices, rather than from the underlying backing block devices.</p>\t\t<p><b>AutoFilter</b>: According to the configuration of drbd, LVM filter will always be changed automatically. To change it manually, disable the checkbox of AutoFilter.</p>\n"
+"\t\t<p>The filter consists of an array of regular expressions. These expressions can be delimited by a character of your choice, and prefixed with either an 'a' (for accept) or 'r' (for reject).</p>\t\t<p>For example, setting filter as [\"r|/dev/sda.*|\"]</p>\n"
+"\n"
+"\t\t<p><b>LVM cache</b>: Enable/turn on writing the LVM cache is default. Disable cache when for network storage, like nfs. </p>\n"
+"\n"
+"\t\t"
+msgstr ""
+
+#: src/include/drbd/helps.rb:130
msgid "<p><b><big>Global Configuration of DRBD</big></b></p>"
msgstr "<p><b><big>Общие настройки DRBD</big></b></p>"
-#: src/include/drbd/helps.rb:115
+#: src/include/drbd/helps.rb:133
msgid "<p>Check <b>\"Disable IP Verification\"</b> to disable one of drbdadm's sanity check</p>"
msgstr "<p>Отметьте <b>\"Отключить проверку IP\"</b> для отключения одной из санитарных проверок drbdadm</p>"
-#: src/include/drbd/helps.rb:118
+#: src/include/drbd/helps.rb:136
msgid ""
"<p><b>Dialog Refresh:</b> The user dialog counts and displays the seconds it waited so\n"
" far. You might want to disable this if you have the console\n"
@@ -340,7 +366,7 @@
"Диалог будет выводить счётчик каждые 'обновление диалога' секунд,\n"
"установите 0 для полного отключения перерисовки. </p>"
-#: src/include/drbd/helps.rb:126
+#: src/include/drbd/helps.rb:144
msgid ""
"<p><b>Minor Count:</b>\n"
" use this if you want to define more resources later\n"
@@ -355,7 +381,7 @@
"которое настроено в этом файле.</p>"
#. Summary dialog help 1/3
-#: src/include/drbd/helps.rb:134
+#: src/include/drbd/helps.rb:152
msgid ""
"<p><b><big>DRBD Configuration</big></b><br>\n"
"Configure drbd here.<br></p>\n"
@@ -364,7 +390,7 @@
"Настройте drbd здесь.<br></p>\n"
#. Summary dialog help 2/3
-#: src/include/drbd/helps.rb:138
+#: src/include/drbd/helps.rb:156
msgid ""
"<p><b><big>Adding a drbd:</big></b><br>\n"
"Choose an drbd from the list of detected drbds.\n"
@@ -377,7 +403,7 @@
"Затем нажмите <b>Настроить</b>.</p>\n"
#. Summary dialog help 3/3
-#: src/include/drbd/helps.rb:145
+#: src/include/drbd/helps.rb:163
msgid ""
"<p><b><big>Editing or Deleting:</big></b><br>\n"
"If you press <b>Edit</b>, an additional dialog in which to change\n"
@@ -388,7 +414,7 @@
"в котором можно изменить параметры настройки.</p>\n"
#. Ovreview dialog help 1/3
-#: src/include/drbd/helps.rb:151
+#: src/include/drbd/helps.rb:169
msgid ""
"<p><b><big>DRBD Configuration Overview</big></b><br>\n"
"Obtain an overview of installed drbds. Additionally\n"
@@ -399,7 +425,7 @@
"изменение их конфигурации.<br></p>\n"
#. Ovreview dialog help 2/3
-#: src/include/drbd/helps.rb:157
+#: src/include/drbd/helps.rb:175
msgid ""
"<p><b><big>Adding a drbd:</big></b><br>\n"
"Press <b>Add</b> to configure a drbd.</p>"
@@ -408,7 +434,7 @@
"Нажмите <b>Добавить</b> для настройки drbd.</p>"
#. Ovreview dialog help 3/3
-#: src/include/drbd/helps.rb:161
+#: src/include/drbd/helps.rb:179
msgid ""
"<p><b><big>Editing or Deleting:</big></b><br>\n"
"Choose a drbd to change or remove.\n"
@@ -419,7 +445,7 @@
"Затем нажмите <b>Изменить</b> или <b>Удалить</b>.</p>\n"
#. Configure1 dialog help 1/2
-#: src/include/drbd/helps.rb:167
+#: src/include/drbd/helps.rb:185
msgid ""
"<p><b><big>Configuration Part One</big></b><br>\n"
"Press <b>Next</b> to continue.\n"
@@ -431,7 +457,7 @@
#. Configure1 dialog help 2/2
#. Configure2 dialog help 2/2
-#: src/include/drbd/helps.rb:173 src/include/drbd/helps.rb:185
+#: src/include/drbd/helps.rb:191 src/include/drbd/helps.rb:203
msgid ""
"<p><b><big>Selecting Something</big></b><br>\n"
"It is not possible. You must code it first. :-)\n"
@@ -442,7 +468,7 @@
"</p>"
#. Configure2 dialog help 1/2
-#: src/include/drbd/helps.rb:179
+#: src/include/drbd/helps.rb:197
msgid ""
"<p><b><big>Configuration Part Two</big></b><br>\n"
"Press <b>Next</b> to continue.\n"
@@ -452,25 +478,50 @@
"Нажмите <b>Далее</b> для продолжения.\n"
"<br></p>\n"
+#. Default is always true (auto)
+#: src/include/drbd/lvm_conf.rb:36
+#, fuzzy
+#| msgid "Configuration of DRBD"
+msgid "LVM Filter Configuration of DRBD"
+msgstr "Настройки DRBD"
+
+#: src/include/drbd/lvm_conf.rb:44
+msgid "Modify LVM Device filter Automatically"
+msgstr ""
+
+#: src/include/drbd/lvm_conf.rb:54
+msgid "Device Filter"
+msgstr ""
+
+#: src/include/drbd/lvm_conf.rb:64
+msgid "Writing the LVM cache"
+msgstr ""
+
+#: src/include/drbd/lvm_conf.rb:73
+msgid "Enable LVM Cache"
+msgstr ""
+
#. encoding: utf-8
#: src/include/drbd/resource_conf.rb:134
msgid "Resource Name"
msgstr "Имя ресурса"
-#: src/include/drbd/resource_conf.rb:300
+#. Update new add disk used of drbd res for LVM filter
+#. Ignore the removed disk
+#: src/include/drbd/resource_conf.rb:326
msgid "Protocol"
msgstr "Протокол"
#. myHelp("basic_conf");
-#: src/include/drbd/resource_conf.rb:546
+#: src/include/drbd/resource_conf.rb:572
msgid "Node names must be different."
msgstr "Имена узлов должны быть разными."
-#: src/include/drbd/resource_conf.rb:552
+#: src/include/drbd/resource_conf.rb:578
msgid "Node names must not include \".\" , using the local hostname."
msgstr "В имена узлов не может входить \".\", использую локальное имя узла."
-#: src/include/drbd/resource_conf.rb:582
+#: src/include/drbd/resource_conf.rb:608
msgid "Please fill out all fields."
msgstr "Заполните все поля.Pf"
@@ -479,39 +530,42 @@
#. Authors: Martin Lazar
#.
#. $Id: startup_conf.ycp 30707 2006-05-04 13:19:08Z lslezak $
-#: src/include/drbd/startup_conf.rb:28
+#: src/include/drbd/startup_conf.rb:29
msgid "Booting"
msgstr "Загрузка"
-#: src/include/drbd/startup_conf.rb:36
-msgid "On -- Start DRBD Server Now and when Booting"
+#: src/include/drbd/startup_conf.rb:37
+#, fuzzy
+#| msgid "On -- Start DRBD Server Now and when Booting"
+msgid "On -- Start DRBD Server when Booting"
msgstr "Вкл -- Запустить сервер DRBD сейчас и при загрузке системы"
-#: src/include/drbd/startup_conf.rb:40
+#: src/include/drbd/startup_conf.rb:41
msgid "Off -- Server Only Starts Manually"
msgstr "Выкл -- Сервер запускается только вручную"
-#: src/include/drbd/startup_conf.rb:49
+#: src/include/drbd/startup_conf.rb:50
msgid "Switch On and Off"
msgstr "Переключение Вкл. и Выкл."
-#: src/include/drbd/startup_conf.rb:54
+#: src/include/drbd/startup_conf.rb:55
msgid "Current Status: "
msgstr "Текущее состояние: "
-#: src/include/drbd/startup_conf.rb:61
+#: src/include/drbd/startup_conf.rb:62
msgid "Start DRBD Server Now"
msgstr "Запустить сервер DRBD сейчас"
-#: src/include/drbd/startup_conf.rb:66
+#: src/include/drbd/startup_conf.rb:67
msgid "Stop DRBD Server Now"
msgstr "Остановить сервер DRBD сейчас"
-#: src/include/drbd/startup_conf.rb:74
+#. firewall_layout is just a dialog
+#: src/include/drbd/startup_conf.rb:89
msgid "Propagate Configuration"
msgstr "Размножить конфигурацию"
-#: src/include/drbd/startup_conf.rb:81
+#: src/include/drbd/startup_conf.rb:96
msgid ""
"To propagate this configuration ,\n"
"copy the configuration file '/etc/drbd.conf' to the rest of nodes manually."
@@ -520,31 +574,31 @@
"скопируйте файл конфигурации '/etc/drbd.conf' в остальные узлы вручную."
#. }
-#: src/include/drbd/startup_conf.rb:122
+#: src/include/drbd/startup_conf.rb:141
msgid "DRBD server is running."
msgstr "Сервер DRBD запущен."
-#: src/include/drbd/startup_conf.rb:123
+#: src/include/drbd/startup_conf.rb:142
msgid "DRBD server is not running."
msgstr "Сервер DRBD не запущен."
#. Report::Error ( Service::Error());
-#: src/include/drbd/startup_conf.rb:142
+#: src/include/drbd/startup_conf.rb:166
msgid "Start DRBD service failed"
msgstr "Не удалось запустить службу DRBD"
#. Report::Error ( Service::Error() );
-#: src/include/drbd/startup_conf.rb:150
+#: src/include/drbd/startup_conf.rb:174
msgid "Stop DRBD service failed"
msgstr "Не удалось остановить службу DRBD"
#. Initialization dialog caption
-#: src/include/drbd/wizards.rb:137
+#: src/include/drbd/wizards.rb:139
msgid "Heartbeat Configuration"
msgstr "Конфигурация Heartbeat"
#. Initialization dialog contents
-#: src/include/drbd/wizards.rb:139
+#: src/include/drbd/wizards.rb:141
msgid "Initializing..."
msgstr "Инициализация..."
@@ -576,58 +630,76 @@
#.
#. Representation of the configuration of drbd.
#. Input and output routines.
-#: src/modules/Drbd.rb:101
+#: src/modules/Drbd.rb:110
msgid "Failed to merge separated DRBD conf files\n"
msgstr "Не удалось объединить файлы настроек DRBD\n"
-#: src/modules/Drbd.rb:123
+#: src/modules/Drbd.rb:132
msgid "Failed to write drbd.conf.YaST2prepare"
msgstr "Не удалось записать drbd.conf.YaST2prepare"
#. DRBD read dialog caption
-#: src/modules/Drbd.rb:133
+#: src/modules/Drbd.rb:185
msgid "Initializing DRBD Configuration"
msgstr "Инициализация настроек DRBD"
#. We do not set help text here, because it was set outside
-#: src/modules/Drbd.rb:141
+#: src/modules/Drbd.rb:193
msgid "Read global settings"
msgstr "Читать общие настройки"
-#: src/modules/Drbd.rb:142
+#: src/modules/Drbd.rb:194
msgid "Read resources"
msgstr "Читать ресурсы"
-#: src/modules/Drbd.rb:143
+#: src/modules/Drbd.rb:195
+#, fuzzy
+#| msgid "DRBD Configuration"
+msgid "Read LVM configurations"
+msgstr "Настройка DRBD"
+
+#: src/modules/Drbd.rb:196
msgid "Read daemon status"
msgstr "Читать состояние демона"
-#: src/modules/Drbd.rb:146
+#: src/modules/Drbd.rb:197 src/modules/Drbd.rb:204
+#, fuzzy
+#| msgid "Read global settings"
+msgid "Read SuSEFirewall Settings"
+msgstr "Читать общие настройки"
+
+#: src/modules/Drbd.rb:200
msgid "Reading global settings..."
msgstr "Чтение общих настроек..."
-#: src/modules/Drbd.rb:147
+#: src/modules/Drbd.rb:201
msgid "Reading resources..."
msgstr "Чтение ресурсов..."
-#: src/modules/Drbd.rb:148
+#: src/modules/Drbd.rb:202
+#, fuzzy
+#| msgid "Writing DRBD Configuration"
+msgid "Reading LVM configurations..."
+msgstr "Запись конфигурации DRBD"
+
+#: src/modules/Drbd.rb:203
msgid "Reading daemon status..."
msgstr "Чтение состояния демона..."
-#: src/modules/Drbd.rb:149 src/modules/Drbd.rb:494
+#: src/modules/Drbd.rb:205 src/modules/Drbd.rb:629
msgid "Finished"
msgstr "Готово"
#. new_map = remove(new_map, key);
-#: src/modules/Drbd.rb:412
+#: src/modules/Drbd.rb:497
msgid "Failed to backup drbd.conf"
msgstr "Не удалось создать резервную копию drbd.conf"
-#: src/modules/Drbd.rb:421
+#: src/modules/Drbd.rb:506
msgid "Failed to clean drbd.conf for drbdadm test"
msgstr "Не удалось очистить drbd.conf для проверки drbdadm"
-#: src/modules/Drbd.rb:445
+#: src/modules/Drbd.rb:530
msgid ""
"Invalid configuration of resource %1\n"
"%2"
@@ -635,12 +707,12 @@
"Неверная конфигурация ресурса %1\n"
"%2"
-#: src/modules/Drbd.rb:464
+#: src/modules/Drbd.rb:549
msgid "Failed to bring drbd.conf back"
msgstr "Не удалось восстановить drbd.conf"
#. DRBD write dialog caption
-#: src/modules/Drbd.rb:474
+#: src/modules/Drbd.rb:605
msgid "Writing DRBD Configuration"
msgstr "Запись конфигурации DRBD"
@@ -648,31 +720,55 @@
#. won't change modified flag
#. return true if !@modified
#. We do not set help text here, because it was set outside
-#: src/modules/Drbd.rb:486
+#: src/modules/Drbd.rb:617
msgid "Write global settings"
msgstr "Записать общие настройки"
-#: src/modules/Drbd.rb:487
+#: src/modules/Drbd.rb:618
msgid "Write resources"
msgstr "Записать ресурсы"
-#: src/modules/Drbd.rb:488
+#: src/modules/Drbd.rb:619
+#, fuzzy
+#| msgid "Writing DRBD Configuration"
+msgid "Write LVM configurations"
+msgstr "Запись конфигурации DRBD"
+
+#: src/modules/Drbd.rb:620
msgid "Set daemon status"
msgstr "Установить состояние демона"
-#: src/modules/Drbd.rb:491
+#: src/modules/Drbd.rb:621
+#, fuzzy
+#| msgid "Write global settings"
+msgid "Write the SuSEfirewall settings"
+msgstr "Записать общие настройки"
+
+#: src/modules/Drbd.rb:624
msgid "Writing global settings..."
msgstr "Запись общих настроек..."
-#: src/modules/Drbd.rb:492
+#: src/modules/Drbd.rb:625
msgid "Writing resources..."
msgstr "Запись ресурсов..."
-#: src/modules/Drbd.rb:493
+#: src/modules/Drbd.rb:626
+#, fuzzy
+#| msgid "Writing DRBD Configuration"
+msgid "Writing LVM configurations..."
+msgstr "Запись конфигурации DRBD"
+
+#: src/modules/Drbd.rb:627
msgid "Setting daemon status..."
msgstr "Установка состояния демона..."
-#: src/modules/Drbd.rb:504
+#: src/modules/Drbd.rb:628
+#, fuzzy
+#| msgid "Writing global settings..."
+msgid "Writing the SuSEFirewall settings"
+msgstr "Запись общих настроек..."
+
+#: src/modules/Drbd.rb:639
msgid "Failed to make directory /etc/drbd.d"
msgstr "Не удалось создать каталог /etc/drbd.d"