Author: keichwa Date: 2017-04-20 11:43:14 +0000 (Thu, 20 Apr 2017) New Revision: 97306 Modified: branches/SLE12-SP3/yast/ko/po/add-on-creator.ko.po branches/SLE12-SP3/yast/ko/po/add-on.ko.po branches/SLE12-SP3/yast/ko/po/audit-laf.ko.po branches/SLE12-SP3/yast/ko/po/auth-client.ko.po branches/SLE12-SP3/yast/ko/po/auth-server.ko.po branches/SLE12-SP3/yast/ko/po/autoinst.ko.po branches/SLE12-SP3/yast/ko/po/base.ko.po branches/SLE12-SP3/yast/ko/po/bootloader.ko.po branches/SLE12-SP3/yast/ko/po/ca-management.ko.po branches/SLE12-SP3/yast/ko/po/cio.ko.po branches/SLE12-SP3/yast/ko/po/cluster.ko.po branches/SLE12-SP3/yast/ko/po/control-center.ko.po branches/SLE12-SP3/yast/ko/po/control.ko.po branches/SLE12-SP3/yast/ko/po/country.ko.po branches/SLE12-SP3/yast/ko/po/dhcp-server.ko.po branches/SLE12-SP3/yast/ko/po/dns-server.ko.po branches/SLE12-SP3/yast/ko/po/docker.ko.po branches/SLE12-SP3/yast/ko/po/drbd.ko.po branches/SLE12-SP3/yast/ko/po/fcoe-client.ko.po branches/SLE12-SP3/yast/ko/po/firewall-services.ko.po branches/SLE12-SP3/yast/ko/po/firewall.ko.po branches/SLE12-SP3/yast/ko/po/firstboot.ko.po branches/SLE12-SP3/yast/ko/po/ftp-server.ko.po branches/SLE12-SP3/yast/ko/po/geo-cluster.ko.po branches/SLE12-SP3/yast/ko/po/http-server.ko.po branches/SLE12-SP3/yast/ko/po/inetd.ko.po branches/SLE12-SP3/yast/ko/po/installation.ko.po branches/SLE12-SP3/yast/ko/po/instserver.ko.po branches/SLE12-SP3/yast/ko/po/iplb.ko.po branches/SLE12-SP3/yast/ko/po/iscsi-client.ko.po branches/SLE12-SP3/yast/ko/po/iscsi-lio-server.ko.po branches/SLE12-SP3/yast/ko/po/isns.ko.po branches/SLE12-SP3/yast/ko/po/journal.ko.po branches/SLE12-SP3/yast/ko/po/journalctl.ko.po branches/SLE12-SP3/yast/ko/po/kdump.ko.po branches/SLE12-SP3/yast/ko/po/languages_db.ko.po branches/SLE12-SP3/yast/ko/po/ldap-client.ko.po branches/SLE12-SP3/yast/ko/po/ldap.ko.po branches/SLE12-SP3/yast/ko/po/mail.ko.po branches/SLE12-SP3/yast/ko/po/migration.ko.po branches/SLE12-SP3/yast/ko/po/multipath.ko.po branches/SLE12-SP3/yast/ko/po/ncurses-pkg.ko.po branches/SLE12-SP3/yast/ko/po/ncurses.ko.po branches/SLE12-SP3/yast/ko/po/network.ko.po branches/SLE12-SP3/yast/ko/po/nfs.ko.po branches/SLE12-SP3/yast/ko/po/nfs_server.ko.po branches/SLE12-SP3/yast/ko/po/nis.ko.po branches/SLE12-SP3/yast/ko/po/nis_server.ko.po branches/SLE12-SP3/yast/ko/po/ntp-client.ko.po branches/SLE12-SP3/yast/ko/po/online-update-configuration.ko.po branches/SLE12-SP3/yast/ko/po/online-update.ko.po branches/SLE12-SP3/yast/ko/po/packager.ko.po branches/SLE12-SP3/yast/ko/po/pam.ko.po branches/SLE12-SP3/yast/ko/po/pkg-bindings.ko.po branches/SLE12-SP3/yast/ko/po/printer.ko.po branches/SLE12-SP3/yast/ko/po/product-creator.ko.po branches/SLE12-SP3/yast/ko/po/proxy.ko.po branches/SLE12-SP3/yast/ko/po/qt-pkg.ko.po branches/SLE12-SP3/yast/ko/po/qt.ko.po branches/SLE12-SP3/yast/ko/po/rdp.ko.po branches/SLE12-SP3/yast/ko/po/rear.ko.po branches/SLE12-SP3/yast/ko/po/registration.ko.po branches/SLE12-SP3/yast/ko/po/reipl.ko.po branches/SLE12-SP3/yast/ko/po/relocation-server.ko.po branches/SLE12-SP3/yast/ko/po/rpm-groups.ko.po branches/SLE12-SP3/yast/ko/po/s390.ko.po branches/SLE12-SP3/yast/ko/po/samba-client.ko.po branches/SLE12-SP3/yast/ko/po/samba-server.ko.po branches/SLE12-SP3/yast/ko/po/samba-users.ko.po branches/SLE12-SP3/yast/ko/po/scanner.ko.po branches/SLE12-SP3/yast/ko/po/security.ko.po branches/SLE12-SP3/yast/ko/po/services-manager.ko.po branches/SLE12-SP3/yast/ko/po/slp-server.ko.po branches/SLE12-SP3/yast/ko/po/slp.ko.po branches/SLE12-SP3/yast/ko/po/smt.ko.po branches/SLE12-SP3/yast/ko/po/snapper.ko.po branches/SLE12-SP3/yast/ko/po/sound.ko.po branches/SLE12-SP3/yast/ko/po/squid.ko.po branches/SLE12-SP3/yast/ko/po/sshd.ko.po branches/SLE12-SP3/yast/ko/po/storage.ko.po branches/SLE12-SP3/yast/ko/po/sudo.ko.po branches/SLE12-SP3/yast/ko/po/support.ko.po branches/SLE12-SP3/yast/ko/po/sysconfig.ko.po branches/SLE12-SP3/yast/ko/po/tftp-server.ko.po branches/SLE12-SP3/yast/ko/po/timezone_db.ko.po branches/SLE12-SP3/yast/ko/po/tune.ko.po branches/SLE12-SP3/yast/ko/po/update.ko.po branches/SLE12-SP3/yast/ko/po/users.ko.po branches/SLE12-SP3/yast/ko/po/vm.ko.po branches/SLE12-SP3/yast/ko/po/vpn.ko.po branches/SLE12-SP3/yast/ko/po/wol.ko.po branches/SLE12-SP3/yast/ko/po/xpram.ko.po branches/SLE12-SP3/yast/ko/po/yast2-apparmor.ko.po Log: merged Modified: branches/SLE12-SP3/yast/ko/po/add-on-creator.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/add-on-creator.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/add-on-creator.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,438 +14,427 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the add-on-creator module -#: src/clients/add-on-creator.rb:54 +#. Command line help text for the add-on-creator module +#: src/clients/add-on-creator.rb:54 msgid "Creator for add-on products" msgstr "추가 기능 제품의 작성자" -#. command line help text for 'create' action -#: src/clients/add-on-creator.rb:67 +#. command line help text for 'create' action +#: src/clients/add-on-creator.rb:67 msgid "Create and build a new add-on product." msgstr "새 추가 기능 제품을 만들고 빌드하십시오." -#. command line help text for 'clone' action -#: src/clients/add-on-creator.rb:77 +#. command line help text for 'clone' action +#: src/clients/add-on-creator.rb:77 msgid "Create and build a new add-on product based on an existing one." msgstr "기존 제품을 기반으로 새 추가 기능 제품을 만들고 빌드하십시오." -#. command line help text for 'sign' action -#: src/clients/add-on-creator.rb:87 +#. command line help text for 'sign' action +#: src/clients/add-on-creator.rb:87 msgid "Sign unsigned Add-On Product" msgstr "서명되지 않은 추가 기능 제품 서명" -#. command line help text for 'list' action -#: src/clients/add-on-creator.rb:97 +#. command line help text for 'list' action +#: src/clients/add-on-creator.rb:97 msgid "List available add-on product configurations." msgstr "사용 가능한 추가 기능 제품 구성을 나열하십시오." -#. command line help text for 'create' action -#: src/clients/add-on-creator.rb:107 +#. command line help text for 'create' action +#: src/clients/add-on-creator.rb:107 msgid "Build an add-on product from the selected configuration." msgstr "선택한 구성에서 추가 기능 제품을 빌드하십시오." -#. command line help text for 'create' action -#: src/clients/add-on-creator.rb:117 +#. command line help text for 'create' action +#: src/clients/add-on-creator.rb:117 msgid "Delete the selected add-on product configuration." msgstr "선택한 추가 기능 제품 구성을 삭제하십시오." -#. command line help text for 'rpm_dir' option -#: src/clients/add-on-creator.rb:125 +#. command line help text for 'rpm_dir' option +#: src/clients/add-on-creator.rb:125 msgid "Path to directory with packages" msgstr "패키지가 포함된 디렉토리 경로" -#. command line help text for 'content' option (do not translate 'content', it's a name) -#: src/clients/add-on-creator.rb:132 +#. command line help text for 'content' option (do not translate 'content', it's a name) +#: src/clients/add-on-creator.rb:132 msgid "Path to content file" msgstr "내용 파일의 경로" -#. command line help text for 'existing' option -#: src/clients/add-on-creator.rb:139 +#. command line help text for 'existing' option +#: src/clients/add-on-creator.rb:139 msgid "Path to directory with existing Add-On Product" msgstr "기존 추가 기능 제품이 포함된 디렉토리 경로" -#. command line help text for 'generate_descriptions' option -#: src/clients/add-on-creator.rb:146 +#. command line help text for 'generate_descriptions' option +#: src/clients/add-on-creator.rb:146 msgid "Generate new package descriptions (do not copy)" msgstr "새 패키지 설명 생성(복사하지 않음)" -#. command line help text for 'package_descriptions_dir' option -#: src/clients/add-on-creator.rb:152 +#. command line help text for 'package_descriptions_dir' option +#: src/clients/add-on-creator.rb:152 msgid "Path to directory with package descriptions" msgstr "패키지 설명이 포함된 디렉토리 경로" -#. command line help text for 'patterns_dir' option -#: src/clients/add-on-creator.rb:159 +#. command line help text for 'patterns_dir' option +#: src/clients/add-on-creator.rb:159 msgid "Path to directory with patterns definitions" msgstr "패턴 정의가 포함된 디렉토리 경로" -#. command line help text for 'output_dir' option -#: src/clients/add-on-creator.rb:166 +#. command line help text for 'output_dir' option +#: src/clients/add-on-creator.rb:166 msgid "Path to the output directory" msgstr "출력 디렉토리 경로" -#. command line help text for 'create_iso' option -#: src/clients/add-on-creator.rb:173 +#. command line help text for 'create_iso' option +#: src/clients/add-on-creator.rb:173 msgid "Create the ISO image" msgstr "ISO 이미지 만들기" -#. command line help text for 'iso_name' option -#: src/clients/add-on-creator.rb:179 +#. command line help text for 'iso_name' option +#: src/clients/add-on-creator.rb:179 msgid "Name of the output ISO image" msgstr "출력 ISO 이미지의 이름" -#. command line help text for 'output_dir' option -#: src/clients/add-on-creator.rb:186 +#. command line help text for 'output_dir' option +#: src/clients/add-on-creator.rb:186 msgid "Path to the output directory for ISO image" msgstr "ISO 이미지에 대한 출력 디렉토리 경로" -#. command line help text for 'do_not_sign' option -#: src/clients/add-on-creator.rb:193 +#. command line help text for 'do_not_sign' option +#: src/clients/add-on-creator.rb:193 msgid "Do not sign the product" msgstr "제품에 서명하지 않음" -#. command line help text for 'gpg_key' option -#: src/clients/add-on-creator.rb:199 +#. command line help text for 'gpg_key' option +#: src/clients/add-on-creator.rb:199 msgid "GPG key ID used to sign a product" msgstr "제품 서명에 사용된 GPG 키 ID" -#. command line help text for 'passphrase' option -#: src/clients/add-on-creator.rb:206 +#. command line help text for 'passphrase' option +#: src/clients/add-on-creator.rb:206 msgid "Passphrase to unlock GPG key" msgstr "GPG 키 잠금을 해제하기 위한 암호구문" -#. command line help text for 'passphrase_file' option -#: src/clients/add-on-creator.rb:213 +#. command line help text for 'passphrase_file' option +#: src/clients/add-on-creator.rb:213 msgid "Path to file with the passphrase for GPG key" msgstr "GPG 키의 암호구문이 포함된 파일 경로" -#. command line help text for 'passphrase' option -#: src/clients/add-on-creator.rb:220 +#. command line help text for 'passphrase' option +#: src/clients/add-on-creator.rb:220 msgid "Resign all packages with selected key." msgstr "선택한 키로 모든 패키지 재서명" -#. command line help text for 'workflow' option -#: src/clients/add-on-creator.rb:226 +#. command line help text for 'workflow' option +#: src/clients/add-on-creator.rb:226 msgid "Path to workflow definition file (installation.xml)" msgstr "워크플로 정의 파일 경로(installation.xml)" -#. command line help text for 'y2update' option -#: src/clients/add-on-creator.rb:233 +#. command line help text for 'y2update' option +#: src/clients/add-on-creator.rb:233 msgid "Path to workflow dialogs archive (y2update.tgz)" msgstr "워크플로 대화 상자 보관 파일의 경로(y2update.tgz)" -#. command line help text for 'y2update_packages_dir' option -#: src/clients/add-on-creator.rb:240 +#. command line help text for 'y2update_packages_dir' option +#: src/clients/add-on-creator.rb:240 msgid "Path to directory with YaST packages to form the workflow" msgstr "워크플로를 구성하는 YaST 패키지가 포함된 디렉토리 경로" -#. command line help text for 'license' option -#: src/clients/add-on-creator.rb:247 +#. command line help text for 'license' option +#: src/clients/add-on-creator.rb:247 msgid "Path to file with license texts (license.zip or license.tar.gz)" msgstr "라이센스 텍스트 파일(license.zip 또는 license.tar.gz)의 경로 " -#. command line help text for 'info' option -#: src/clients/add-on-creator.rb:254 +#. command line help text for 'info' option +#: src/clients/add-on-creator.rb:254 msgid "Path to file with 'info' text (media.1/info.txt)" msgstr "'info' 텍스트가 포함된 파일 경로(media.1/info.txt)" -#. command line help text for 'extra_prov' option -#: src/clients/add-on-creator.rb:261 +#. command line help text for 'extra_prov' option +#: src/clients/add-on-creator.rb:261 msgid "Path to file with additional dependencies (EXTRA_PROV)" msgstr "추가 의존성이 포함된 파일 경로(EXTRA_PROV)" -#. command line help text for 'addon-dir' option -#: src/clients/add-on-creator.rb:268 +#. command line help text for 'addon-dir' option +#: src/clients/add-on-creator.rb:268 msgid "Path to directory with Add-On Product" msgstr "추가 기능 제품이 포함된 디렉토리 경로" -#. command line help text for 'do_not_build' option -#: src/clients/add-on-creator.rb:275 +#. command line help text for 'do_not_build' option +#: src/clients/add-on-creator.rb:275 msgid "Do not build the product, only save new configuration." msgstr "제품을 빌드하지 않고 새 구성만 저장하십시오." -#. help text for 'number' option; do not translate 'list' -#: src/clients/add-on-creator.rb:281 +#. help text for 'number' option; do not translate 'list' +#: src/clients/add-on-creator.rb:281 msgid "Number of the selected add-on (see 'list' command for product numbers)." msgstr "선택한 추가 기능의 개수입니다(제품 번호는 'list' 명령 참조)." -#. command line help text for 'changelog' option -#: src/clients/add-on-creator.rb:288 +#. command line help text for 'changelog' option +#: src/clients/add-on-creator.rb:288 msgid "Generate a Changelog file." msgstr "Changelog 파일을 생성하십시오." -#. command line help text for 'no_release_package' option -#: src/clients/add-on-creator.rb:294 +#. command line help text for 'no_release_package' option +#: src/clients/add-on-creator.rb:294 msgid "Do not generate the release package." msgstr "릴리스 패키지를 생성하지 마십시오." -#. command line help text for 'product_file' option -#: src/clients/add-on-creator.rb:300 +#. command line help text for 'product_file' option +#: src/clients/add-on-creator.rb:300 msgid "Path to file with the product description (*.prod)" msgstr "제품 설명이 포함된 파일 경로(*.prod)" -#. error message, %1 is path -#: src/clients/add-on-creator.rb:398 +#. error message, %1 is path +#: src/clients/add-on-creator.rb:398 msgid "File %1 does not exist." msgstr "%1 파일이 존재하지 않습니다." -#. error message, %1 is path -#: src/clients/add-on-creator.rb:405 +#. error message, %1 is path +#: src/clients/add-on-creator.rb:405 msgid "Directory %1 does not exist." msgstr "%1 디렉토리가 없습니다." -#. question on command line -#: src/clients/add-on-creator.rb:454 +#. question on command line +#: src/clients/add-on-creator.rb:454 msgid "Passphrase for key %1:" msgstr "%1 키에 대한 암호구문:" -#. error message -#: src/clients/add-on-creator.rb:475 +#. error message +#: src/clients/add-on-creator.rb:475 msgid "Path to output directory is missing." msgstr "출력 디렉토리 경로가 없습니다." -#. error message, missing tool -#: src/clients/add-on-creator.rb:609 +#. error message, missing tool +#: src/clients/add-on-creator.rb:609 msgid "/usr/bin/unzip does not exists" msgstr "/usr/bin/unzip이 존재하지 않습니다." -#. error message -#: src/clients/add-on-creator.rb:733 +#. error message +#: src/clients/add-on-creator.rb:733 msgid "Path to directory with packages is missing." msgstr "패키지가 포함된 디렉토리 경로가 없습니다." -#. error message -#: src/clients/add-on-creator.rb:742 +#. error message +#: src/clients/add-on-creator.rb:742 msgid "Path to content file is missing." msgstr "내용 파일의 경로가 없습니다." -#. error message -#: src/clients/add-on-creator.rb:756 +#. error message +#: src/clients/add-on-creator.rb:756 msgid "Path to existing Add-On is missing." msgstr "기존 추가 기능의 경로가 없습니다." -#. error message -#: src/clients/add-on-creator.rb:774 +#. error message +#: src/clients/add-on-creator.rb:774 msgid "Path to directory with Add-On is missing." msgstr "추가 기능이 포함된 디렉토리 경로가 없습니다." -#. command line summary, %1 is order, %2 product name -#: src/clients/add-on-creator.rb:813 +#. command line summary, %1 is order, %2 product name +#: src/clients/add-on-creator.rb:813 msgid "(%1) Product Name: %2" msgstr "(%1) 제품 이름: %2" -#. command line summary -#: src/clients/add-on-creator.rb:821 +#. command line summary +#: src/clients/add-on-creator.rb:821 msgid "\tVersion: %1" msgstr "\t버전: %1" -#. command line summary -#: src/clients/add-on-creator.rb:828 +#. command line summary +#: src/clients/add-on-creator.rb:828 msgid "\tInput directory: %1" msgstr "\t입력 디렉토리: %1" -#: src/clients/add-on-creator.rb:834 +#: src/clients/add-on-creator.rb:834 msgid "\tOutput directory: %1" msgstr "\t출력 디렉토리: %1" -#. command line summary, %1 is comma-separated list -#: src/clients/add-on-creator.rb:842 +#. command line summary, %1 is comma-separated list +#: src/clients/add-on-creator.rb:842 msgid "\tPatterns: %1" msgstr "\t패턴: %1" -#. command line message, do not translate 'create', 'clone' -#: src/clients/add-on-creator.rb:864 -msgid "" -"There is no add-on product configuration present. Create a new one using the " -"'create' or 'clone' commands." -msgstr "" -"추가 기능 제품 구성이 없습니다. 'create' 또는 'clone' 명령을 사용하여 새 항목" -"을 생성하십시오." +#. command line message, do not translate 'create', 'clone' +#: src/clients/add-on-creator.rb:864 +msgid "There is no add-on product configuration present. Create a new one using the 'create' or 'clone' commands." +msgstr "추가 기능 제품 구성이 없습니다. 'create' 또는 'clone' 명령을 사용하여 새 항목을 생성하십시오." -#. error message -#: src/clients/add-on-creator.rb:876 +#. error message +#: src/clients/add-on-creator.rb:876 msgid "Specify the add-on product to build." msgstr "빌드할 추가 기능 제품을 지정하십시오." -#. command line message -#: src/clients/add-on-creator.rb:917 +#. command line message +#: src/clients/add-on-creator.rb:917 msgid "There is no add-on product configuration present." msgstr "추가 기능 제품 구성이 없습니다." -#. error message -#: src/clients/add-on-creator.rb:924 +#. error message +#: src/clients/add-on-creator.rb:924 msgid "Specify the add-on product configuration that should be deleted." msgstr "삭제해야 하는 추가 기능 제품 구성을 지정하십시오." -#. dialog caption -#: src/include/add-on-creator/complex.rb:99 +#. dialog caption +#: src/include/add-on-creator/complex.rb:99 msgid "Add-on Creator Configuration Overview" msgstr "추가 기능 작성기 구성 개요" -#. summary item -#: src/include/add-on-creator/complex.rb:128 +#. summary item +#: src/include/add-on-creator/complex.rb:128 msgid "Input directory: %1<br>" msgstr "입력 디렉토리: %1<br>" -#. summary item -#: src/include/add-on-creator/complex.rb:133 +#. summary item +#: src/include/add-on-creator/complex.rb:133 msgid "Output directory: %1<br>" msgstr "출력 디렉토리: %1<br>" -#. summary item, %1 is comma-separated list -#: src/include/add-on-creator/complex.rb:142 +#. summary item, %1 is comma-separated list +#: src/include/add-on-creator/complex.rb:142 msgid "Patterns: %1" msgstr "패턴: %1" -#. help text -#: src/include/add-on-creator/complex.rb:156 -msgid "" -"<p>Start creating a new add-on product configuration with <b>Add</b>.</p>" -msgstr "" -"<p><b>추가</b>를 사용하여 새 추가 기능 제품 구성 만들기를 시작합니다.</p>" +#. help text +#: src/include/add-on-creator/complex.rb:156 +msgid "<p>Start creating a new add-on product configuration with <b>Add</b>.</p>" +msgstr "<p><b>추가</b>를 사용하여 새 추가 기능 제품 구성 만들기를 시작합니다.</p>" -#. help text -#: src/include/add-on-creator/complex.rb:160 -msgid "" -"<p>Use <b>Edit</b> to modify the selected add-on product configuration.</p>" +#. help text +#: src/include/add-on-creator/complex.rb:160 +msgid "<p>Use <b>Edit</b> to modify the selected add-on product configuration.</p>" msgstr "<p><b>편집</b>을 사용하여 선택한 추가 기능 제품 구성을 수정합니다.</p>" -#. help text -#: src/include/add-on-creator/complex.rb:164 +#. help text +#: src/include/add-on-creator/complex.rb:164 msgid "<p>Delete the selected configuration using <b>Delete</b>.</p>" msgstr "<p><b>삭제</b>를 사용하여 선택한 구성을 삭제합니다.</p>" -#. help text -#: src/include/add-on-creator/complex.rb:166 -msgid "" -"<p>Build the new add-on product based on the selected configuration with " -"<b>Build</b>.</p>" -msgstr "" -"<p><b>빌드</b>를 사용하여 선택한 구성에 따라 새로운 추가 기능 제품을 빌드합니" -"다.</p>" +#. help text +#: src/include/add-on-creator/complex.rb:166 +msgid "<p>Build the new add-on product based on the selected configuration with <b>Build</b>.</p>" +msgstr "<p><b>빌드</b>를 사용하여 선택한 구성에 따라 새로운 추가 기능 제품을 빌드합니다.</p>" -#. table header item -#. summary header -#: src/include/add-on-creator/complex.rb:178 -#: src/include/add-on-creator/complex.rb:2476 +#. table header item +#. summary header +#: src/include/add-on-creator/complex.rb:178 +#: src/include/add-on-creator/complex.rb:2476 msgid "Product Name" msgstr "제품 이름" -#. table header item -#. input field label -#. desctiption of pattern keys -#: src/include/add-on-creator/complex.rb:180 -#: src/include/add-on-creator/complex.rb:1272 src/modules/AddOnCreator.rb:316 +#. table header item +#. input field label +#. desctiption of pattern keys +#: src/include/add-on-creator/complex.rb:180 +#: src/include/add-on-creator/complex.rb:1272 src/modules/AddOnCreator.rb:316 msgid "Version" msgstr "버전" -#. push button label -#: src/include/add-on-creator/complex.rb:192 +#. push button label +#: src/include/add-on-creator/complex.rb:192 msgid "&Build" msgstr "빌드(&B)" -#. yes/no popup -#: src/include/add-on-creator/complex.rb:247 +#. yes/no popup +#: src/include/add-on-creator/complex.rb:247 msgid "Really delete configuration \"%1\"?" msgstr "\"%1\" 구성을 삭제하시겠습니까?" -#. dialog caption -#. dialog caption -#: src/include/add-on-creator/complex.rb:296 -#: src/include/add-on-creator/complex.rb:450 +#. dialog caption +#. dialog caption +#: src/include/add-on-creator/complex.rb:296 +#: src/include/add-on-creator/complex.rb:450 msgid "Add-On Product Creator" msgstr "추가 기능 제품 작성자" -#. radio button label -#: src/include/add-on-creator/complex.rb:313 +#. radio button label +#: src/include/add-on-creator/complex.rb:313 msgid "Create an Add-On &from the Beginning" msgstr "처음부터 추가 기능 만들기(&F)" -#. radio button label -#: src/include/add-on-creator/complex.rb:322 +#. radio button label +#: src/include/add-on-creator/complex.rb:322 msgid "Create an Add-On Based on an &Existing Add-On" msgstr "기존 추가 기능을 기반으로 추가 기능 만들기(&E)" -#. text entry label -#: src/include/add-on-creator/complex.rb:332 +#. text entry label +#: src/include/add-on-creator/complex.rb:332 msgid "&Path to Directory of the Existing Add-On Product" msgstr "기존 추가 기능 제품의 디렉토리 경로(&P)" -#. checkbox label -#: src/include/add-on-creator/complex.rb:343 +#. checkbox label +#: src/include/add-on-creator/complex.rb:343 msgid "&Generate Package Descriptions" msgstr "패키지 설명 생성(&G)" -#. textentry label -#: src/include/add-on-creator/complex.rb:460 +#. textentry label +#: src/include/add-on-creator/complex.rb:460 msgid "&Add-On Product Label" msgstr "추가 기능 제품 레이블(&A)" -#. textentry label -#. text entry label -#: src/include/add-on-creator/complex.rb:464 -#: src/include/add-on-creator/patterns.rb:126 +#. textentry label +#. text entry label +#: src/include/add-on-creator/complex.rb:464 +#: src/include/add-on-creator/patterns.rb:126 msgid "&Version" msgstr "버전(&V)" -#: src/include/add-on-creator/complex.rb:468 +#: src/include/add-on-creator/complex.rb:468 msgid "Required Product" msgstr "필수 제품" -#. radio button label -#: src/include/add-on-creator/complex.rb:483 +#. radio button label +#: src/include/add-on-creator/complex.rb:483 msgid "SUSE &Linux Enterprise Server 11" msgstr "SUSE Linux Enterprise Server 11(&L)" -#. radio button label -#: src/include/add-on-creator/complex.rb:492 +#. radio button label +#: src/include/add-on-creator/complex.rb:492 msgid "SUSE L&inux Enterprise Desktop 11" msgstr "SUSE Linux Enterprise Desktop 11(&I)" -#. radio button label -#: src/include/add-on-creator/complex.rb:501 +#. radio button label +#: src/include/add-on-creator/complex.rb:501 msgid "S&USE Linux Enterprise 11" msgstr "SUSE Linux Enterprise 11(&U)" -#. radio button label -#: src/include/add-on-creator/complex.rb:510 +#. radio button label +#: src/include/add-on-creator/complex.rb:510 msgid "SUSE Linux Enterprise 11 SP3" msgstr "SUSE Linux Enterprise 11 SP3" -#. radio button label -#: src/include/add-on-creator/complex.rb:519 +#. radio button label +#: src/include/add-on-creator/complex.rb:519 msgid "openSUSE 12.&3" msgstr "openSUSE 12.&3" -#. radio button label -#: src/include/add-on-creator/complex.rb:528 +#. radio button label +#: src/include/add-on-creator/complex.rb:528 msgid "openSUSE 13.1" msgstr "openSUSE 13.1" -#. radio button label -#: src/include/add-on-creator/complex.rb:538 +#. radio button label +#: src/include/add-on-creator/complex.rb:538 msgid "&Other" msgstr "기타(&O)" -#. text entry label -#: src/include/add-on-creator/complex.rb:556 +#. text entry label +#: src/include/add-on-creator/complex.rb:556 msgid "&Path to Directory with Add-On Packages" msgstr "추가 기능 패키지가 있는 디렉토리 경로(&P)" -#. text entry label -#: src/include/add-on-creator/complex.rb:566 +#. text entry label +#: src/include/add-on-creator/complex.rb:566 msgid "Path to Directory with Re&quired Product Packages" msgstr "필수 제품 패키지가 있는 디렉토리 경로(&Q)" -#. error popup -#. error popup -#: src/include/add-on-creator/complex.rb:639 -#: src/include/add-on-creator/complex.rb:647 +#. error popup +#. error popup +#: src/include/add-on-creator/complex.rb:639 +#: src/include/add-on-creator/complex.rb:647 msgid "Directory %1 is not accessible." msgstr "%1 디렉토리에 액세스할 수 없습니다." -#. error popup (input validation failed) -#: src/include/add-on-creator/complex.rb:726 +#. error popup (input validation failed) +#: src/include/add-on-creator/complex.rb:726 msgid "" "The value of NAME may contain only\n" "letters, numbers, and the characters \".~_-\"." @@ -453,126 +442,126 @@ "NAME 값에는 문자, 숫자 및 \".~_-\"\n" " 등의 문자만 사용할 수 있습니다." -#: src/include/add-on-creator/complex.rb:756 +#: src/include/add-on-creator/complex.rb:756 msgid "LABEL" msgstr "레이블" -#. combo label -#: src/include/add-on-creator/complex.rb:758 +#. combo label +#: src/include/add-on-creator/complex.rb:758 msgid "La&nguage Code" msgstr "언어 코드(&N)" -#. textentry label -#. textentry label -#. textentry label -#: src/include/add-on-creator/complex.rb:760 -#: src/include/add-on-creator/complex.rb:1546 -#: src/include/add-on-creator/patterns.rb:172 +#. textentry label +#. textentry label +#. textentry label +#: src/include/add-on-creator/complex.rb:760 +#: src/include/add-on-creator/complex.rb:1546 +#: src/include/add-on-creator/patterns.rb:172 msgid "&Value" msgstr "값(&V)" -#. Heading for help popup window -#. Heading for help popup window -#. Heading for help popup window -#: src/include/add-on-creator/complex.rb:779 -#: src/include/add-on-creator/complex.rb:1454 -#: src/include/add-on-creator/patterns.rb:246 +#. Heading for help popup window +#. Heading for help popup window +#. Heading for help popup window +#: src/include/add-on-creator/complex.rb:779 +#: src/include/add-on-creator/complex.rb:1454 +#: src/include/add-on-creator/patterns.rb:246 msgid "Help" msgstr "도움말" -#. dialog caption - 'content' is file name -#: src/include/add-on-creator/complex.rb:804 +#. dialog caption - 'content' is file name +#: src/include/add-on-creator/complex.rb:804 msgid "Product Definition" msgstr "제품 정의" -#. label -#: src/include/add-on-creator/complex.rb:896 +#. label +#: src/include/add-on-creator/complex.rb:896 msgid "Content File" msgstr "컨텐트 파일" -#. table header -#. table header -#: src/include/add-on-creator/complex.rb:902 -#: src/include/add-on-creator/complex.rb:941 +#. table header +#. table header +#: src/include/add-on-creator/complex.rb:902 +#: src/include/add-on-creator/complex.rb:941 msgid "Key" msgstr "키" -#. table header -#. table header -#. table header 2/2 -#. table header 2/2 -#: src/include/add-on-creator/complex.rb:904 -#: src/include/add-on-creator/complex.rb:943 -#: src/include/add-on-creator/complex.rb:1766 -#: src/include/add-on-creator/patterns.rb:355 +#. table header +#. table header +#. table header 2/2 +#. table header 2/2 +#: src/include/add-on-creator/complex.rb:904 +#: src/include/add-on-creator/complex.rb:943 +#: src/include/add-on-creator/complex.rb:1766 +#: src/include/add-on-creator/patterns.rb:355 msgid "Value" msgstr "값" -#. table header -#. table header -#. label for 'Des' pattern key -#. label for 'Des' key -#: src/include/add-on-creator/complex.rb:906 -#: src/include/add-on-creator/complex.rb:945 src/modules/AddOnCreator.rb:351 -#: src/modules/AddOnCreator.rb:579 +#. table header +#. table header +#. label for 'Des' pattern key +#. label for 'Des' key +#: src/include/add-on-creator/complex.rb:906 +#: src/include/add-on-creator/complex.rb:945 src/modules/AddOnCreator.rb:351 +#: src/modules/AddOnCreator.rb:579 msgid "Description" msgstr "설명" -#. push button label -#. button label -#. button label -#. button label -#: src/include/add-on-creator/complex.rb:914 -#: src/include/add-on-creator/dialogs.rb:187 -#: src/include/add-on-creator/dialogs.rb:488 -#: src/include/add-on-creator/dialogs.rb:730 +#. push button label +#. button label +#. button label +#. button label +#: src/include/add-on-creator/complex.rb:914 +#: src/include/add-on-creator/dialogs.rb:187 +#: src/include/add-on-creator/dialogs.rb:488 +#: src/include/add-on-creator/dialogs.rb:730 msgid "Im&port" msgstr "불러오기(&P)" -#. checkbox label -#: src/include/add-on-creator/complex.rb:920 +#. checkbox label +#: src/include/add-on-creator/complex.rb:920 msgid "Show &Only Required Keywords" msgstr "필수 키워드만 표시(&O)" -#. check box label -#: src/include/add-on-creator/complex.rb:930 +#. check box label +#: src/include/add-on-creator/complex.rb:930 msgid "Generate Release Package" msgstr "릴리스 패키지 생성" -#. label -#: src/include/add-on-creator/complex.rb:935 +#. label +#: src/include/add-on-creator/complex.rb:935 msgid "Product File" msgstr "제품 파일" -#. push button label -#. push button label -#. button label -#. button label -#. button label -#. button label -#. button label -#: src/include/add-on-creator/complex.rb:952 -#: src/include/add-on-creator/complex.rb:1590 -#: src/include/add-on-creator/complex.rb:1744 -#: src/include/add-on-creator/dialogs.rb:157 -#: src/include/add-on-creator/dialogs.rb:461 -#: src/include/add-on-creator/dialogs.rb:718 -#: src/include/add-on-creator/patterns.rb:342 +#. push button label +#. push button label +#. button label +#. button label +#. button label +#. button label +#. button label +#: src/include/add-on-creator/complex.rb:952 +#: src/include/add-on-creator/complex.rb:1590 +#: src/include/add-on-creator/complex.rb:1744 +#: src/include/add-on-creator/dialogs.rb:157 +#: src/include/add-on-creator/dialogs.rb:461 +#: src/include/add-on-creator/dialogs.rb:718 +#: src/include/add-on-creator/patterns.rb:342 msgid "I&mport" msgstr "임포트(&M)" -#. popup for file selection dialog -#: src/include/add-on-creator/complex.rb:1024 +#. popup for file selection dialog +#: src/include/add-on-creator/complex.rb:1024 msgid "Choose the Existing Content File" msgstr "기존 내용 파일 선택" -#. popup for file selection dialog -#: src/include/add-on-creator/complex.rb:1071 +#. popup for file selection dialog +#: src/include/add-on-creator/complex.rb:1071 msgid "Choose the Existing Product File" msgstr "기존 제품 파일 선택" -#. error popup -#: src/include/add-on-creator/complex.rb:1090 +#. error popup +#: src/include/add-on-creator/complex.rb:1090 msgid "" "Enter the values for these items:\n" "%1" @@ -580,121 +569,121 @@ "다음 항목에 대한 값을 입력합니다:\n" "%1" -#. table item -#: src/include/add-on-creator/complex.rb:1148 +#. table item +#: src/include/add-on-creator/complex.rb:1148 msgid "Yes" msgstr "예" -#. table item -#: src/include/add-on-creator/complex.rb:1150 +#. table item +#: src/include/add-on-creator/complex.rb:1150 msgid "No" msgstr "아니오" -#. textentry label -#: src/include/add-on-creator/complex.rb:1171 +#. textentry label +#: src/include/add-on-creator/complex.rb:1171 msgid "Value of \"%1\"" msgstr "\"%1\"의 값" -#. input field label -#: src/include/add-on-creator/complex.rb:1262 +#. input field label +#: src/include/add-on-creator/complex.rb:1262 msgid "Name" msgstr "이름" -#. combo box label -#: src/include/add-on-creator/complex.rb:1282 +#. combo box label +#: src/include/add-on-creator/complex.rb:1282 msgid "Flag" msgstr "플래그" -#. combo box item -#: src/include/add-on-creator/complex.rb:1285 +#. combo box item +#: src/include/add-on-creator/complex.rb:1285 msgid "Equal" msgstr "같음" -#. combo box item -#: src/include/add-on-creator/complex.rb:1287 +#. combo box item +#: src/include/add-on-creator/complex.rb:1287 msgid "Greater than" msgstr "보다 큼" -#. combo box item -#: src/include/add-on-creator/complex.rb:1289 +#. combo box item +#: src/include/add-on-creator/complex.rb:1289 msgid "Lower than" msgstr "보다 낮음" -#. input field label -#: src/include/add-on-creator/complex.rb:1300 src/modules/AddOnCreator.rb:322 +#. input field label +#: src/include/add-on-creator/complex.rb:1300 src/modules/AddOnCreator.rb:322 msgid "Release" msgstr "릴리스" -#. input field label -#: src/include/add-on-creator/complex.rb:1310 +#. input field label +#: src/include/add-on-creator/complex.rb:1310 msgid "Flavor" msgstr "특징" -#. input field label -#. table item label -#: src/include/add-on-creator/complex.rb:1320 src/modules/AddOnCreator.rb:735 +#. input field label +#. table item label +#: src/include/add-on-creator/complex.rb:1320 src/modules/AddOnCreator.rb:735 msgid "Patch level" msgstr "패치 수준" -#. MultiSelectionBox label -#: src/include/add-on-creator/complex.rb:1414 +#. MultiSelectionBox label +#: src/include/add-on-creator/complex.rb:1414 msgid "&Packages" msgstr "패키지들(&P)" -#. check box label -#: src/include/add-on-creator/complex.rb:1417 +#. check box label +#: src/include/add-on-creator/complex.rb:1417 msgid "Select or Deselect &All" msgstr "모두 선택 또는 선택 취소(&A)" -#. popup for file selection dialog -#: src/include/add-on-creator/complex.rb:1611 +#. popup for file selection dialog +#: src/include/add-on-creator/complex.rb:1611 msgid "Choose the file with the text to be imported." msgstr "임포트할 텍스트가 포함된 파일 선택" -#. dialog caption -#: src/include/add-on-creator/complex.rb:1633 +#. dialog caption +#: src/include/add-on-creator/complex.rb:1633 msgid "Package Descriptions" msgstr "패키지 설명" -#. combobox label -#. combobox label -#: src/include/add-on-creator/complex.rb:1695 -#: src/include/add-on-creator/complex.rb:1731 +#. combobox label +#. combobox label +#: src/include/add-on-creator/complex.rb:1695 +#: src/include/add-on-creator/complex.rb:1731 msgid "Description File &Language Code" msgstr "설명 파일 언어 코드(&L)" -#. button label -#. button label -#: src/include/add-on-creator/complex.rb:1704 -#: src/include/add-on-creator/complex.rb:1741 +#. button label +#. button label +#: src/include/add-on-creator/complex.rb:1704 +#: src/include/add-on-creator/complex.rb:1741 msgid "Add Lan&guage" msgstr "언어 추가(&G)" -#. table header -#. label for 'Pkg' key -#: src/include/add-on-creator/complex.rb:1754 src/modules/AddOnCreator.rb:575 +#. table header +#. label for 'Pkg' key +#: src/include/add-on-creator/complex.rb:1754 src/modules/AddOnCreator.rb:575 msgid "Package" msgstr "패키지" -#. table header 1/2 -#. table header 1/2 -#: src/include/add-on-creator/complex.rb:1764 -#: src/include/add-on-creator/patterns.rb:353 +#. table header 1/2 +#. table header 1/2 +#: src/include/add-on-creator/complex.rb:1764 +#: src/include/add-on-creator/patterns.rb:353 msgid "Attribute" msgstr "속성" -#. textentry label -#: src/include/add-on-creator/complex.rb:1782 +#. textentry label +#: src/include/add-on-creator/complex.rb:1782 msgid "Location of the File with Additional &Dependencies" msgstr "추가 종속성 파일의 위치(&D)" -#. popup for file selection dialog -#: src/include/add-on-creator/complex.rb:1896 +#. popup for file selection dialog +#: src/include/add-on-creator/complex.rb:1896 msgid "Choose the New Package Description File" msgstr "새 패키지 설명 파일 선택" -#. error popup (correct name is 'packages.*') -#: src/include/add-on-creator/complex.rb:1909 +#. error popup (correct name is 'packages.*') +#: src/include/add-on-creator/complex.rb:1909 msgid "" "The package description file is named incorrectly.\n" "Choose another one." @@ -702,13 +691,13 @@ "패키지 설명 파일 이름을 잘못 지정했습니다.\n" "다른 이름을 선택하십시오." -#. popup for file selection dialog -#: src/include/add-on-creator/complex.rb:2044 +#. popup for file selection dialog +#: src/include/add-on-creator/complex.rb:2044 msgid "Choose the Path to EXTRA_PROV File" msgstr "EXTRA_PROV 파일의 경로 선택" -#. error popup -#: src/include/add-on-creator/complex.rb:2054 +#. error popup +#: src/include/add-on-creator/complex.rb:2054 msgid "" "The file '%1' does not exist.\n" "Choose another one." @@ -716,60 +705,60 @@ "'%1' 파일이 존재하지 않습니다.\n" "다른 파일을 선택하십시오." -#. frame label -#: src/include/add-on-creator/complex.rb:2090 +#. frame label +#: src/include/add-on-creator/complex.rb:2090 msgid "Key Type" msgstr "키 유형" -#. radiobutton label (key type) -#: src/include/add-on-creator/complex.rb:2104 +#. radiobutton label (key type) +#: src/include/add-on-creator/complex.rb:2104 msgid "&DSA" msgstr "DSA(&D)" -#. radiobutton label (key type) -#: src/include/add-on-creator/complex.rb:2109 +#. radiobutton label (key type) +#: src/include/add-on-creator/complex.rb:2109 msgid "&RSA" msgstr "RSA(&R)" -#. textentry label -#: src/include/add-on-creator/complex.rb:2119 +#. textentry label +#: src/include/add-on-creator/complex.rb:2119 msgid "Key &Size" msgstr "키 크기(&S)" -#. textentry label -#: src/include/add-on-creator/complex.rb:2124 +#. textentry label +#: src/include/add-on-creator/complex.rb:2124 msgid "E&xpiration Date" msgstr "만료 일자(&X)" -#. textentry label -#: src/include/add-on-creator/complex.rb:2127 +#. textentry label +#: src/include/add-on-creator/complex.rb:2127 msgid "&Name" msgstr "이름(&N)" -#. textentry label -#: src/include/add-on-creator/complex.rb:2129 +#. textentry label +#: src/include/add-on-creator/complex.rb:2129 msgid "Commen&t" msgstr "주석(&T)" -#. textentry label -#: src/include/add-on-creator/complex.rb:2134 +#. textentry label +#: src/include/add-on-creator/complex.rb:2134 msgid "E-&Mail Address" msgstr "전자 메일 주소(&M)" -#. password widget label -#. password entry label -#: src/include/add-on-creator/complex.rb:2137 -#: src/include/add-on-creator/complex.rb:2251 +#. password widget label +#. password entry label +#: src/include/add-on-creator/complex.rb:2137 +#: src/include/add-on-creator/complex.rb:2251 msgid "&Passphrase" msgstr "비밀문구(&P)" -#. dialog caption -#: src/include/add-on-creator/complex.rb:2144 +#. dialog caption +#: src/include/add-on-creator/complex.rb:2144 msgid "New GPG Key" msgstr "새 GPG 키" -#. error popup (see Name, Comment, Email Adress text entries -#: src/include/add-on-creator/complex.rb:2189 +#. error popup (see Name, Comment, Email Adress text entries +#: src/include/add-on-creator/complex.rb:2189 msgid "" "Name, comment, and e-mail address values are empty.\n" "You must enter at least one of them to provide user identification.\n" @@ -777,13 +766,13 @@ "이름, 설명 및 전자 메일 주소 값이 비어 있습니다.\n" "사용자 ID를 제공하려면 이러한 값 중 하나 이상을 입력해야 합니다.\n" -#. feedback popup headline -#: src/include/add-on-creator/complex.rb:2197 +#. feedback popup headline +#: src/include/add-on-creator/complex.rb:2197 msgid "Generating Primary Key Pair" msgstr "기본 키 쌍 생성" -#. feedback message -#: src/include/add-on-creator/complex.rb:2199 +#. feedback message +#: src/include/add-on-creator/complex.rb:2199 msgid "" "If it takes too long, do some other work to give\n" "the OS a chance to collect more entropy.\n" @@ -791,103 +780,103 @@ "너무 오래 걸리면 다른 작업을 수행하여 OS에\n" "엔트로피를 추가로 모을 기회를 줍니다.\n" -#. dialog caption -#: src/include/add-on-creator/complex.rb:2217 +#. dialog caption +#: src/include/add-on-creator/complex.rb:2217 msgid "Signing the Add-On Product" msgstr "추가 기능 제품 서명" -#. combo box label -#: src/include/add-on-creator/complex.rb:2237 +#. combo box label +#: src/include/add-on-creator/complex.rb:2237 msgid "GPG &Key ID" msgstr "GPG 키 ID(&K)" -#. button label -#: src/include/add-on-creator/complex.rb:2244 +#. button label +#: src/include/add-on-creator/complex.rb:2244 msgid "&Create..." msgstr "작성(&C)..." -#. password entry label (verification) -#: src/include/add-on-creator/complex.rb:2258 +#. password entry label (verification) +#: src/include/add-on-creator/complex.rb:2258 msgid "&Passphrase Verification" msgstr "암호 확인(&P)" -#. checkbox label -#: src/include/add-on-creator/complex.rb:2265 +#. checkbox label +#: src/include/add-on-creator/complex.rb:2265 msgid "Re&sign all packages with selected key." msgstr "선택한 키로 모든 패키지 재서명(&S)" -#. error message -#: src/include/add-on-creator/complex.rb:2302 +#. error message +#: src/include/add-on-creator/complex.rb:2302 msgid "Passwords do not match. Try again." msgstr "암호가 일치하지 않습니다. 다시 하십시오." -#. dialog caption -#: src/include/add-on-creator/complex.rb:2334 +#. dialog caption +#: src/include/add-on-creator/complex.rb:2334 msgid "Output Settings" msgstr "출력 설정" -#. text entry label -#: src/include/add-on-creator/complex.rb:2358 +#. text entry label +#: src/include/add-on-creator/complex.rb:2358 msgid "P&ath to Output Directory" msgstr "출력 디렉토리 경로(&A)" -#. check box label -#: src/include/add-on-creator/complex.rb:2364 +#. check box label +#: src/include/add-on-creator/complex.rb:2364 msgid "Create &ISO Image" msgstr "ISO 이미지 작성(&I)" -#. text entry label -#: src/include/add-on-creator/complex.rb:2371 +#. text entry label +#: src/include/add-on-creator/complex.rb:2371 msgid "Image File Name" msgstr "이미지 파일 이름" -#. check box label -#: src/include/add-on-creator/complex.rb:2377 +#. check box label +#: src/include/add-on-creator/complex.rb:2377 msgid "&Generate Changelog" msgstr "Changelog 생성(&G)" -#. button label -#: src/include/add-on-creator/complex.rb:2382 +#. button label +#: src/include/add-on-creator/complex.rb:2382 msgid "&Configure Workflow..." msgstr "워크플로 구성(&C)..." -#. button label -#: src/include/add-on-creator/complex.rb:2384 +#. button label +#: src/include/add-on-creator/complex.rb:2384 msgid "O&ptional Files..." msgstr "옵션 파일(&P)..." -#. error popup -#: src/include/add-on-creator/complex.rb:2429 +#. error popup +#: src/include/add-on-creator/complex.rb:2429 msgid "Enter the path to the directory for the add-on." msgstr "추가 기능에 대한 디렉토리 경로를 입력합니다." -#. dialog caption -#: src/include/add-on-creator/complex.rb:2469 +#. dialog caption +#: src/include/add-on-creator/complex.rb:2469 msgid "Overview" msgstr "개요" -#. summary header -#: src/include/add-on-creator/complex.rb:2480 +#. summary header +#: src/include/add-on-creator/complex.rb:2480 msgid "Patterns" msgstr "패턴" -#. summary header -#: src/include/add-on-creator/complex.rb:2488 +#. summary header +#: src/include/add-on-creator/complex.rb:2488 msgid "Input Directory" msgstr "입력 디렉토리" -#. summary header -#: src/include/add-on-creator/complex.rb:2495 +#. summary header +#: src/include/add-on-creator/complex.rb:2495 msgid "Output Directory" msgstr "출력 디렉토리" -#. summary line -#: src/include/add-on-creator/complex.rb:2505 +#. summary line +#: src/include/add-on-creator/complex.rb:2505 msgid "Creating an ISO image in the output directory" msgstr "출력 디렉토리에서 ISO 이미지 작성" -#. popup message -#: src/include/add-on-creator/dialogs.rb:79 +#. popup message +#: src/include/add-on-creator/dialogs.rb:79 msgid "" "A file with this name already exists.\n" "Choose a different one." @@ -895,154 +884,154 @@ "이 이름을 가진 파일이 이미 존재합니다.\n" "다른 이름을 선택하십시오." -#. dialog caption -#: src/include/add-on-creator/dialogs.rb:98 +#. dialog caption +#: src/include/add-on-creator/dialogs.rb:98 msgid "Expert Settings" msgstr "고급 설정" -#: src/include/add-on-creator/dialogs.rb:136 +#: src/include/add-on-creator/dialogs.rb:136 msgid "&info.txt File" msgstr "info.txt 파일(&I)" -#. frame label -#: src/include/add-on-creator/dialogs.rb:141 +#. frame label +#: src/include/add-on-creator/dialogs.rb:141 msgid "&License Files" msgstr "라이센스 파일(&L)" -#. frame label -#: src/include/add-on-creator/dialogs.rb:171 +#. frame label +#: src/include/add-on-creator/dialogs.rb:171 msgid "README Files" msgstr "README 파일" -#. textentry label -#: src/include/add-on-creator/dialogs.rb:241 +#. textentry label +#: src/include/add-on-creator/dialogs.rb:241 msgid "&Name of the New README File" msgstr "새 README 파일의 이름(&N)" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:258 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:258 msgid "Choose the New README File" msgstr "새 README 파일 선택" -#. textentry label -#: src/include/add-on-creator/dialogs.rb:300 +#. textentry label +#: src/include/add-on-creator/dialogs.rb:300 msgid "&Language for the New License File" msgstr "새 라이센스 파일의 언어(&L)" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:320 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:320 msgid "Choose the New License File" msgstr "새 라이센스 파일 선택" -#. dialog caption -#: src/include/add-on-creator/dialogs.rb:401 +#. dialog caption +#: src/include/add-on-creator/dialogs.rb:401 msgid "Expert Settings, Part 2" msgstr "고급 설정, 2부" -#. frame label -#: src/include/add-on-creator/dialogs.rb:445 +#. frame label +#: src/include/add-on-creator/dialogs.rb:445 msgid "©ING Files" msgstr "COPYING 파일(&C)" -#. frame label -#: src/include/add-on-creator/dialogs.rb:472 +#. frame label +#: src/include/add-on-creator/dialogs.rb:472 msgid "COPY&RIGHT Files" msgstr "COPYRIGHT 파일(&R)" -#. textentry label -#: src/include/add-on-creator/dialogs.rb:541 +#. textentry label +#: src/include/add-on-creator/dialogs.rb:541 msgid "&Language for the New COPYRIGHT File" msgstr "새 COPYRIGHT 파일의 언어(&L)" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:560 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:560 msgid "Choose the New COPYRIGHT File" msgstr "새 COPYRIGHT 파일 선택" -#. textentry label -#: src/include/add-on-creator/dialogs.rb:605 +#. textentry label +#: src/include/add-on-creator/dialogs.rb:605 msgid "&Language for the New COPYING File" msgstr "새 COPYING 파일의 언어(&L)" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:624 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:624 msgid "Choose the New COPYING File" msgstr "새 COPYING 파일 선택" -#. dialog caption -#: src/include/add-on-creator/dialogs.rb:701 +#. dialog caption +#: src/include/add-on-creator/dialogs.rb:701 msgid "Expert Settings, Part 3" msgstr "고급 설정, 3부" -#: src/include/add-on-creator/dialogs.rb:715 +#: src/include/add-on-creator/dialogs.rb:715 msgid "products" msgstr "제품" -#: src/include/add-on-creator/dialogs.rb:721 +#: src/include/add-on-creator/dialogs.rb:721 msgid "patches" msgstr "패치" -#. button label -#: src/include/add-on-creator/dialogs.rb:724 +#. button label +#: src/include/add-on-creator/dialogs.rb:724 msgid "&Import" msgstr "불러오기(&I)" -#: src/include/add-on-creator/dialogs.rb:727 +#: src/include/add-on-creator/dialogs.rb:727 msgid "media" msgstr "미디어" -#. dialog caption -#: src/include/add-on-creator/dialogs.rb:769 +#. dialog caption +#: src/include/add-on-creator/dialogs.rb:769 msgid "Workflow Configuration" msgstr "워크플로 구성" -#. textentry label -#: src/include/add-on-creator/dialogs.rb:792 +#. textentry label +#: src/include/add-on-creator/dialogs.rb:792 msgid "&Location of the File with the Workflow Description" msgstr "워크플로 설명이 있는 파일의 위치(&L)" -#. radiobutton label -#: src/include/add-on-creator/dialogs.rb:806 +#. radiobutton label +#: src/include/add-on-creator/dialogs.rb:806 msgid "&No Additional YaST Modules" msgstr "추가 YaST 모듈 없음(&N)" -#. radiobutton label -#: src/include/add-on-creator/dialogs.rb:815 +#. radiobutton label +#: src/include/add-on-creator/dialogs.rb:815 msgid "&Path to y2update.tgz" msgstr "y2update.tgz 경로(&P)" -#. pushbutton label -#: src/include/add-on-creator/dialogs.rb:823 +#. pushbutton label +#: src/include/add-on-creator/dialogs.rb:823 msgid "&Browse" msgstr "찾아보기(&B)" -#. radiobutton label -#: src/include/add-on-creator/dialogs.rb:830 +#. radiobutton label +#: src/include/add-on-creator/dialogs.rb:830 msgid "&Import the Packages" msgstr "패키지 가져오기(&I)" -#. table header -#: src/include/add-on-creator/dialogs.rb:840 +#. table header +#: src/include/add-on-creator/dialogs.rb:840 msgid "YaST Module Package" msgstr "YaST 모듈 패키지" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:892 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:892 msgid "Choose the installation.xml File" msgstr "installation.xml 파일 선택" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:911 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:911 msgid "Choose the Path to the y2update.tgz File" msgstr "y2update.tgz 파일 경로 선택" -#. popup for file selection dialog -#: src/include/add-on-creator/dialogs.rb:922 +#. popup for file selection dialog +#: src/include/add-on-creator/dialogs.rb:922 msgid "Choose the YaST Module Package" msgstr "YaST 모듈 패키지 선택" -#. Build dialog help -#: src/include/add-on-creator/helps.rb:36 +#. Build dialog help +#: src/include/add-on-creator/helps.rb:36 msgid "" "<p><b><big>Creating the Add-On</big></b><br>\n" "Please wait...<br></p>\n" @@ -1050,8 +1039,8 @@ "<p><b><big>추가 기능 작성 중</big></b><br>\n" "잠시 기다리십시오...<br></p>\n" -#. Write dialog help -#: src/include/add-on-creator/helps.rb:40 +#. Write dialog help +#: src/include/add-on-creator/helps.rb:40 msgid "" "<p>Writing the add-on configurations<br>\n" "</p>\n" @@ -1059,368 +1048,225 @@ "<p>추가 기능 구성 작성 중<br>\n" "</p>\n" -#. help text for start menu -#: src/include/add-on-creator/helps.rb:44 -msgid "" -"<p>This module offers guidance for the creation of an add-on product.</p>" +#. help text for start menu +#: src/include/add-on-creator/helps.rb:44 +msgid "<p>This module offers guidance for the creation of an add-on product.</p>" msgstr "<p>이 모듈은 추가 기능 제품의 작성 지침을 제공합니다.</p>" -#. help text for start menu, cont. -#: src/include/add-on-creator/helps.rb:48 -msgid "" -"<p>Select how to create the new add-on product. You can create it from the " -"beginning or base it on an existing product.</p>" -msgstr "" -"<p>새 추가 기능 제품을 만드는 방법을 선택하십시오. 처음부터 만들거나 기존 제" -"품을 기반으로 만들 수 있습니다.</p>" +#. help text for start menu, cont. +#: src/include/add-on-creator/helps.rb:48 +msgid "<p>Select how to create the new add-on product. You can create it from the beginning or base it on an existing product.</p>" +msgstr "<p>새 추가 기능 제품을 만드는 방법을 선택하십시오. 처음부터 만들거나 기존 제품을 기반으로 만들 수 있습니다.</p>" -#. help text for start menu, cont. -#: src/include/add-on-creator/helps.rb:52 -msgid "" -"<p>When basing the new product on an existing product, check <b>Generate " -"Package Descriptions</b> to generate new descriptions of packages in the " -"existing product.</p>" -msgstr "" -"<p>기존 제품을 기반으로 새 제품을 만들 경우에는 <b>패키지 설명 생성</b>을 눌" -"러 기존 제품에 있는 패키지의 새 설명을 생성합니다.</p>" +#. help text for start menu, cont. +#: src/include/add-on-creator/helps.rb:52 +msgid "<p>When basing the new product on an existing product, check <b>Generate Package Descriptions</b> to generate new descriptions of packages in the existing product.</p>" +msgstr "<p>기존 제품을 기반으로 새 제품을 만들 경우에는 <b>패키지 설명 생성</b>을 눌러 기존 제품에 있는 패키지의 새 설명을 생성합니다.</p>" -#. help text for initial data (paragraph title) -#: src/include/add-on-creator/helps.rb:56 +#. help text for initial data (paragraph title) +#: src/include/add-on-creator/helps.rb:56 msgid "<p><b>Name and Version</b></p>" msgstr "<p><b>이름 및 버전</b></p>" -#. help text for initial data, cont. -#: src/include/add-on-creator/helps.rb:60 +#. help text for initial data, cont. +#: src/include/add-on-creator/helps.rb:60 msgid "<p>Enter the name and version of add-on product.</p>" msgstr "<p>추가 기능 제품의 버전과 이름을 입력합니다.</p>" -#. help text for initial data, cont. -#: src/include/add-on-creator/helps.rb:62 +#. help text for initial data, cont. +#: src/include/add-on-creator/helps.rb:62 msgid "<p><b>Required Product</b></p>" msgstr "<p><b>필수 제품</b></p>" -#. help text for initial data, cont. -#: src/include/add-on-creator/helps.rb:64 -msgid "" -"<p>Select the product to which the new add-on product can be applied. This " -"selection forms the <b>REQUIRES</b> value of the <tt>content</tt> file.</p>" -msgstr "" -"<p>새 추가 기능 제품을 적용할 수 있는 제품을 선택합니다. 선택한 제품이 <tt>내" -"용</tt> 파일의 <b>REQUIRES</b> 값이 됩니다.</p>" +#. help text for initial data, cont. +#: src/include/add-on-creator/helps.rb:64 +msgid "<p>Select the product to which the new add-on product can be applied. This selection forms the <b>REQUIRES</b> value of the <tt>content</tt> file.</p>" +msgstr "<p>새 추가 기능 제품을 적용할 수 있는 제품을 선택합니다. 선택한 제품이 <tt>내용</tt> 파일의 <b>REQUIRES</b> 값이 됩니다.</p>" -#. help text for initial data (paragraph title), cont. -#: src/include/add-on-creator/helps.rb:68 +#. help text for initial data (paragraph title), cont. +#: src/include/add-on-creator/helps.rb:68 msgid "<p><b>Add-On Packages</b></p>" msgstr "<p><b>추가 기능 패키지</b></p>" -#. help text for initial data, cont. -#: src/include/add-on-creator/helps.rb:70 -msgid "" -"<p>Choose the path to the directory containing the RPM packages that should " -"form your add-on product.</p>" -msgstr "" -"<p>추가 기능 제품을 형성할 RPM 패키지가 들어 있는 디렉토리 경로를 선택하십시" -"오.</p>" +#. help text for initial data, cont. +#: src/include/add-on-creator/helps.rb:70 +msgid "<p>Choose the path to the directory containing the RPM packages that should form your add-on product.</p>" +msgstr "<p>추가 기능 제품을 형성할 RPM 패키지가 들어 있는 디렉토리 경로를 선택하십시오.</p>" -#. help text for initial data (paragraph title), cont. -#: src/include/add-on-creator/helps.rb:74 +#. help text for initial data (paragraph title), cont. +#: src/include/add-on-creator/helps.rb:74 msgid "<p><b>Required Product Packages</b></p>" msgstr "<p><b>필수 제품 패키지</b></p>" -#. help text for initial data, cont. -#: src/include/add-on-creator/helps.rb:76 -msgid "" -"<p>Optionally, choose the path to the directory containing the RPM packages " -"from the product the add-on product should be based on. These packages will " -"not be contained in the add-on product, but could be used for creating the " -"patterns later in the workflow.</p>" -msgstr "" -"<p>또는 추가 기능 제품의 바탕이 될 RPM 패키지가 들어 있는 디렉토리 경로를 선" -"택하십시오. 이러한 패키지는 추가 기능 제품에 포함되지 않지만 워크플로에서 나" -"중에 패턴을 작성하는 데 사용될 수 있습니다.</p>" +#. help text for initial data, cont. +#: src/include/add-on-creator/helps.rb:76 +msgid "<p>Optionally, choose the path to the directory containing the RPM packages from the product the add-on product should be based on. These packages will not be contained in the add-on product, but could be used for creating the patterns later in the workflow.</p>" +msgstr "<p>또는 추가 기능 제품의 바탕이 될 RPM 패키지가 들어 있는 디렉토리 경로를 선택하십시오. 이러한 패키지는 추가 기능 제품에 포함되지 않지만 워크플로에서 나중에 패턴을 작성하는 데 사용될 수 있습니다.</p>" -#. help text for content file editor (<tt>content</tt> is a name of file) -#: src/include/add-on-creator/helps.rb:80 +#. help text for content file editor (<tt>content</tt> is a name of file) +#: src/include/add-on-creator/helps.rb:80 msgid "<p>Here, edit the values of the <tt>content</tt> file.</p>" msgstr "<p>여기에서 <tt>내용</tt> 파일의 값을 편집합니다.</p>" -#. help text for content file editor, cont. -#: src/include/add-on-creator/helps.rb:84 -msgid "" -"<p>Enter the information required to identify the add-on product. Deselect " -"<b>Show Only Required Keywords</b> to see all attributes of the <tt>content file.</p>" -msgstr "" -"<p>추가 기능 제품을 식별하는 데 필요한 정보를 입력하십시오. <tt>내용</tt> 파" -"일의 모든 속성을 보려면 <b>필수 키워드만 표시</b>를 선택 취소합니다.</p>" +#. help text for content file editor, cont. +#: src/include/add-on-creator/helps.rb:84 +msgid "<p>Enter the information required to identify the add-on product. Deselect <b>Show Only Required Keywords</b> to see all attributes of the <tt>content</tt> file.</p>" +msgstr "<p>추가 기능 제품을 식별하는 데 필요한 정보를 입력하십시오. <tt>내용</tt> 파일의 모든 속성을 보려면 <b>필수 키워드만 표시</b>를 선택 취소합니다.</p>" -#. help text for content file editor, cont. -#: src/include/add-on-creator/helps.rb:88 +#. help text for content file editor, cont. +#: src/include/add-on-creator/helps.rb:88 msgid "<p>Use <b>Import</b> to import an existing <tt>content</tt> file.</p>" -msgstr "" -"<p>기존 <tt>내용</tt> 파일을 가져오려면 <b>가져오기</b>를 사용합니다.</p>" +msgstr "<p>기존 <tt>내용</tt> 파일을 가져오려면 <b>가져오기</b>를 사용합니다.</p>" -#. help text for package description files -#: src/include/add-on-creator/helps.rb:92 -msgid "" -"<p>Edit the language-specific descriptions of packages (<tt>packages.lang files) here.</p>" +#. help text for package description files +#: src/include/add-on-creator/helps.rb:92 +msgid "<p>Edit the language-specific descriptions of packages (<tt>packages.lang</tt> files) here.</p>" msgstr "<p>패키지(<tt>packages.lang</tt> 파일)의 언어별 설명을 편집합니다.</p>" -#. help text for package description files, cont. -#: src/include/add-on-creator/helps.rb:96 -msgid "" -"<p>Use <b>Add Language</b> to add a description file for a new language. The " -"list of available languages is read from the <b>LINGUAS</b> value of the " -"<tt>content</tt> file. Import an existing file with package descriptions " -"with <b>Import</b>. Delete the description file with <b>Delete</b>.</p>" -msgstr "" -"<p>새 언어에 대한 설명 파일을 추가하려면 <b>언어 추가</b>를 사용합니다. 사용 " -"가능한 언어 목록은 <tt>내용</tt> 파일의 <b>LINGUAS</b> 값에서 읽어 옵니다. 패" -"키지 설명이 있는 기존 파일을 가져오려면 <b>가져오기</b>를 사용합니다. 설명 파" -"일을 삭제하려면 <b>삭제</b>를 사용합니다.</p>" +#. help text for package description files, cont. +#: src/include/add-on-creator/helps.rb:96 +msgid "<p>Use <b>Add Language</b> to add a description file for a new language. The list of available languages is read from the <b>LINGUAS</b> value of the <tt>content</tt> file. Import an existing file with package descriptions with <b>Import</b>. Delete the description file with <b>Delete</b>.</p>" +msgstr "<p>새 언어에 대한 설명 파일을 추가하려면 <b>언어 추가</b>를 사용합니다. 사용 가능한 언어 목록은 <tt>내용</tt> 파일의 <b>LINGUAS</b> 값에서 읽어 옵니다. 패키지 설명이 있는 기존 파일을 가져오려면 <b>가져오기</b>를 사용합니다. 설명 파일을 삭제하려면 <b>삭제</b>를 사용합니다.</p>" -#. help text for package description files, cont. -#: src/include/add-on-creator/helps.rb:100 -msgid "" -"<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify description " -"entries for the selected package.</p>" -msgstr "" -"<p>선택한 패키지에 대한 설명 항목을 수정하려면 두 번째 테이블의 <b>추가</b> " -"및 <b>편집</b>을 사용합니다.</p>" +#. help text for package description files, cont. +#: src/include/add-on-creator/helps.rb:100 +msgid "<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify description entries for the selected package.</p>" +msgstr "<p>선택한 패키지에 대한 설명 항목을 수정하려면 두 번째 테이블의 <b>추가</b> 및 <b>편집</b>을 사용합니다.</p>" -#. help text for package description files, cont. -#: src/include/add-on-creator/helps.rb:104 -msgid "" -"<p>Optionally, choose the path for the file providing <b>Additional Package " -"Dependencies</b> (EXTRA_PROV).</p>" -msgstr "" -"<p>선택적으로 <b>추가 패키지 종속성</b>(EXTRA_PROV)을 제공하는 파일의 경로를 " -"선택할 수도 있습니다.</p>" +#. help text for package description files, cont. +#: src/include/add-on-creator/helps.rb:104 +msgid "<p>Optionally, choose the path for the file providing <b>Additional Package Dependencies</b> (EXTRA_PROV).</p>" +msgstr "<p>선택적으로 <b>추가 패키지 종속성</b>(EXTRA_PROV)을 제공하는 파일의 경로를 선택할 수도 있습니다.</p>" -#. help text for patterns -#: src/include/add-on-creator/helps.rb:108 +#. help text for patterns +#: src/include/add-on-creator/helps.rb:108 msgid "<p>Create and edit the patterns for the add-on product here.</p>" msgstr "<p>추가 기능 제품에 대한 패턴을 생성 및 편집합니다.</p>" -#. help text for patterns, cont. -#: src/include/add-on-creator/helps.rb:112 -msgid "" -"<p>Use <b>New</b> to create a new pattern or <b>Import</b> to import an " -"existing one.</p>" -msgstr "" -"<p><b>새로 만들기</b>를 사용하여 패턴을 새로 만들거나 <b>가져오기</b>를 사용" -"하여 기존 패턴을 가져옵니다.</p>" +#. help text for patterns, cont. +#: src/include/add-on-creator/helps.rb:112 +msgid "<p>Use <b>New</b> to create a new pattern or <b>Import</b> to import an existing one.</p>" +msgstr "<p><b>새로 만들기</b>를 사용하여 패턴을 새로 만들거나 <b>가져오기</b>를 사용하여 기존 패턴을 가져옵니다.</p>" -#. help text for patterns, cont. -#: src/include/add-on-creator/helps.rb:116 -msgid "" -"<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify pattern " -"attributes.</p>" -msgstr "" -"<p>패턴 속성을 수정하려면 두 번째 테이블의 <b>추가</b> 및 <b>편집</b>을 사용" -"합니다.</p>" +#. help text for patterns, cont. +#: src/include/add-on-creator/helps.rb:116 +msgid "<p>Use <b>Add</b> and <b>Edit</b> in the second table to modify pattern attributes.</p>" +msgstr "<p>패턴 속성을 수정하려면 두 번째 테이블의 <b>추가</b> 및 <b>편집</b>을 사용합니다.</p>" -#. help text for patterns, cont. -#: src/include/add-on-creator/helps.rb:120 +#. help text for patterns, cont. +#: src/include/add-on-creator/helps.rb:120 msgid "" -"<p>Check <b>Required pattern</b> to mark the selected pattern as required " -"for\n" -"the add-on product. Such a pattern will be automatically preselected when " -"the installation of the add-on product is started.</p>" -msgstr "" -"<p>추가 기능 제품에 대해 선택한 패턴을 필수로 설정하려면 <b>필수 패턴</b>을 " -"선택합니다. 이러한 패턴은 추가 기능 제품의 설치가 시작될 때 자동으로 미리 선" -"택됩니다.</p>" +"<p>Check <b>Required pattern</b> to mark the selected pattern as required for\n" +"the add-on product. Such a pattern will be automatically preselected when the installation of the add-on product is started.</p>" +msgstr "<p>추가 기능 제품에 대해 선택한 패턴을 필수로 설정하려면 <b>필수 패턴</b>을 선택합니다. 이러한 패턴은 추가 기능 제품의 설치가 시작될 때 자동으로 미리 선택됩니다.</p>" -#. help text for the 'various settings' dialog -#: src/include/add-on-creator/helps.rb:124 -msgid "" -"<p>Specify the path to the directory in which the add-on product should be " -"created. Select <b>Create ISO Image</b> to create the ISO image of the " -"product in the output directory.</p>" -msgstr "" -"<p>추가 기능 제품을 만들 디렉토리 경로를 지정합니다. 출력 디렉토리에서 제품" -"의 ISO 이미지를 만들려면 <b>ISO 이미지 작성</b>을 선택합니다.</p>" +#. help text for the 'various settings' dialog +#: src/include/add-on-creator/helps.rb:124 +msgid "<p>Specify the path to the directory in which the add-on product should be created. Select <b>Create ISO Image</b> to create the ISO image of the product in the output directory.</p>" +msgstr "<p>추가 기능 제품을 만들 디렉토리 경로를 지정합니다. 출력 디렉토리에서 제품의 ISO 이미지를 만들려면 <b>ISO 이미지 작성</b>을 선택합니다.</p>" -#. help text for the 'various settings' dialog -#: src/include/add-on-creator/helps.rb:128 -msgid "" -"<p>Use <b>Generate Changelog</b> to generate a changelog file containing all " -"changes of packages on the add-on product made in the last two years.</p>" -msgstr "" -"<p><b>Changelog 생성</b>을 사용하여 지난 2년 동안 추가 기능 제품에 있는 패키" -"지의 모든 변경사항을 기록한 Changelog 파일을 생성합니다.</p>" +#. help text for the 'various settings' dialog +#: src/include/add-on-creator/helps.rb:128 +msgid "<p>Use <b>Generate Changelog</b> to generate a changelog file containing all changes of packages on the add-on product made in the last two years.</p>" +msgstr "<p><b>Changelog 생성</b>을 사용하여 지난 2년 동안 추가 기능 제품에 있는 패키지의 모든 변경사항을 기록한 Changelog 파일을 생성합니다.</p>" -#. help text for the 'various settings' dialog -#: src/include/add-on-creator/helps.rb:132 -msgid "" -"<p>Adapt the workflow of the add-on product with <b>Configure Workflow</b>. " -"Use <b>Optional Files</b> to configure texts of <tt>README</tt> files, " -"licenses, and other optional values.</p>" -msgstr "" -"<p>추가 기능 제품에 맞게 워크플로를 개조하려면 <b>워크플로 구성</b>을 사용합" -"니다. <tt>README</tt> 파일과 라이센스의 텍스트와 그 밖의 다른 선택 사항 값을 " -"구성하려면 <b>옵션 파일</b>을 사용합니다.</p>" +#. help text for the 'various settings' dialog +#: src/include/add-on-creator/helps.rb:132 +msgid "<p>Adapt the workflow of the add-on product with <b>Configure Workflow</b>. Use <b>Optional Files</b> to configure texts of <tt>README</tt> files, licenses, and other optional values.</p>" +msgstr "<p>추가 기능 제품에 맞게 워크플로를 개조하려면 <b>워크플로 구성</b>을 사용합니다. <tt>README</tt> 파일과 라이센스의 텍스트와 그 밖의 다른 선택 사항 값을 구성하려면 <b>옵션 파일</b>을 사용합니다.</p>" -#. workflow help text -#: src/include/add-on-creator/helps.rb:136 -msgid "" -"<p>Here, you can enter the files necessary for customizing your add-on " -"product workflow.</p>" -msgstr "" -"<p>여기에서는 추가 기능 제품 워크플로를 사용자 정의하는 데 필요한 파일에 들어" -"갈 수 있습니다.</p>" +#. workflow help text +#: src/include/add-on-creator/helps.rb:136 +msgid "<p>Here, you can enter the files necessary for customizing your add-on product workflow.</p>" +msgstr "<p>여기에서는 추가 기능 제품 워크플로를 사용자 정의하는 데 필요한 파일에 들어갈 수 있습니다.</p>" -#. workflow help text -#: src/include/add-on-creator/helps.rb:140 -msgid "" -"<p>Enter the location of the file with the workflow description. This file " -"is an alternative to <tt>control.xml</tt> and is saved as <tt>installation." -"xml</tt> in the add-on product's base directory.</p>" -msgstr "" -"<p>워크플로 설명이 있는 파일의 위치를 입력합니다. 이 파일은 <tt>control.xml의 대체 파일이며 해당 추가 기능 제품의 기본 디렉토리에 <tt>installation." -"xml</tt>이라는 이름으로 저장됩니다.</p>" +#. workflow help text +#: src/include/add-on-creator/helps.rb:140 +msgid "<p>Enter the location of the file with the workflow description. This file is an alternative to <tt>control.xml</tt> and is saved as <tt>installation.xml</tt> in the add-on product's base directory.</p>" +msgstr "<p>워크플로 설명이 있는 파일의 위치를 입력합니다. 이 파일은 <tt>control.xml</tt>의 대체 파일이며 해당 추가 기능 제품의 기본 디렉토리에 <tt>installation.xml</tt>이라는 이름으로 저장됩니다.</p>" -#. workflow help text -#: src/include/add-on-creator/helps.rb:144 -msgid "" -"<p>To use custom YaST modules during the installation of the add-on product, " -"enter the path to the <tt>y2update.tgz</tt> archive where these modules are " -"stored or configure the contents of <tt>y2update.tgz</tt> by specifying the " -"YaST RPM packages in <b>Import the Packages</b>.</p>" -msgstr "" -"<p>추가 기능 제품 설치 도중 사용자 정의 YaST 모듈을 사용하려면 이러한 모듈이 " -"저장된 <tt>y2update.tgz</tt> 아카이브의 경로를 입력하거나 <b>패키지 가져오기" -"</b>에서 YaST RPM 패키지를 지정하여 <tt>y2update.tgz</tt> 컨텐츠를 구성하십시" -"오.</p>" +#. workflow help text +#: src/include/add-on-creator/helps.rb:144 +msgid "<p>To use custom YaST modules during the installation of the add-on product, enter the path to the <tt>y2update.tgz</tt> archive where these modules are stored or configure the contents of <tt>y2update.tgz</tt> by specifying the YaST RPM packages in <b>Import the Packages</b>.</p>" +msgstr "<p>추가 기능 제품 설치 도중 사용자 정의 YaST 모듈을 사용하려면 이러한 모듈이 저장된 <tt>y2update.tgz</tt> 아카이브의 경로를 입력하거나 <b>패키지 가져오기</b>에서 YaST RPM 패키지를 지정하여 <tt>y2update.tgz</tt> 컨텐츠를 구성하십시오.</p>" -#. help text for expert dialog 1 -#: src/include/add-on-creator/helps.rb:148 -msgid "" -"<p>The optional <tt>info.txt</tt> file gives information about the add-on " -"that should be displayed as a pop-up window with an <b>OK</b> button.</p>" -msgstr "" -"<p>선택 사항인 <tt>info.txt</tt> 파일은 <b>확인</b> 버튼을 누르면 팝업 창으" -"로 표시되는 추가 기능에 대한 정보를 제공합니다.</p>" +#. help text for expert dialog 1 +#: src/include/add-on-creator/helps.rb:148 +msgid "<p>The optional <tt>info.txt</tt> file gives information about the add-on that should be displayed as a pop-up window with an <b>OK</b> button.</p>" +msgstr "<p>선택 사항인 <tt>info.txt</tt> 파일은 <b>확인</b> 버튼을 누르면 팝업 창으로 표시되는 추가 기능에 대한 정보를 제공합니다.</p>" -#. help text for expert dialog 1, cont -#: src/include/add-on-creator/helps.rb:152 -msgid "" -"<p>The text of the license is displayed in a window with <b>Agree</b> and " -"<b>Disagree</b> buttons before the installation starts. The files with the " -"license texts in different languages are compressed to the <tt>license.zip archive and stored in the <tt>media.1</tt> directory.</p>" -msgstr "" -"<p>설치를 시작하기 전에 <b>동의</b> 및 <b>동의 안 함</b> 버튼을 누르면 라이센" -"스의 텍스트가 창에 표시됩니다. 다른 언어로 된 라이센스 텍스트 파일은 " -"<tt>license.zip</tt> 보관 파일로 압축되어 <tt>media.1</tt> 디렉토리에 저장됩" -"니다.</p>" +#. help text for expert dialog 1, cont +#: src/include/add-on-creator/helps.rb:152 +msgid "<p>The text of the license is displayed in a window with <b>Agree</b> and <b>Disagree</b> buttons before the installation starts. The files with the license texts in different languages are compressed to the <tt>license.zip</tt> archive and stored in the <tt>media.1</tt> directory.</p>" +msgstr "<p>설치를 시작하기 전에 <b>동의</b> 및 <b>동의 안 함</b> 버튼을 누르면 라이센스의 텍스트가 창에 표시됩니다. 다른 언어로 된 라이센스 텍스트 파일은 <tt>license.zip</tt> 보관 파일로 압축되어 <tt>media.1</tt> 디렉토리에 저장됩니다.</p>" -#. help text for expert dialog 2 -#: src/include/add-on-creator/helps.rb:156 -msgid "" -"<p>The <tt>COPYRIGHT</tt> and <tt>COPYING</tt> files can have various " -"language modifications and are stored in the root directory of the add-on " -"product.</p>" -msgstr "" -"<p><tt>COPYRIGHT</tt> 및 <tt>COPYING</tt> 파일은 여러 가지 언어 수정본을 가" -"질 수 있으며 해당 추가 기능 제품의 루트 디렉토리에 저장됩니다.</p>" +#. help text for expert dialog 2 +#: src/include/add-on-creator/helps.rb:156 +msgid "<p>The <tt>COPYRIGHT</tt> and <tt>COPYING</tt> files can have various language modifications and are stored in the root directory of the add-on product.</p>" +msgstr "<p><tt>COPYRIGHT</tt> 및 <tt>COPYING</tt> 파일은 여러 가지 언어 수정본을 가질 수 있으며 해당 추가 기능 제품의 루트 디렉토리에 저장됩니다.</p>" -#. help text for signing dialog -#: src/include/add-on-creator/helps.rb:160 -msgid "" -"<p>Here, configure the signing of the add-on product. Choose a secret key " -"from the list of keys available or create a new one with <b>Create</b>.</p>" -msgstr "" -"<p>여기에서 추가 기능 제품의 서명을 구성합니다. 사용 가능한 키 목록에서 비밀 " -"키를 선택하거나 <b>작성</b>을 사용하여 새로운 키를 만듭니다.</p>" +#. help text for signing dialog +#: src/include/add-on-creator/helps.rb:160 +msgid "<p>Here, configure the signing of the add-on product. Choose a secret key from the list of keys available or create a new one with <b>Create</b>.</p>" +msgstr "<p>여기에서 추가 기능 제품의 서명을 구성합니다. 사용 가능한 키 목록에서 비밀 키를 선택하거나 <b>작성</b>을 사용하여 새로운 키를 만듭니다.</p>" -#. help text for signing dialog, cont. -#: src/include/add-on-creator/helps.rb:164 +#. help text for signing dialog, cont. +#: src/include/add-on-creator/helps.rb:164 msgid "<p>Enter the passphrase needed to unlock the secret key.</p>" msgstr "<p>비밀 키 잠금을 해제하는 데 필요한 암호 문구를 입력합니다.</p>" -#. help text for signing dialog, cont. -#: src/include/add-on-creator/helps.rb:166 -msgid "" -"<p>Decide if you want to <b>Sign All Packages</b> of the add-on product with " -"the selected key. All previous package signatures will be removed.</p>" -msgstr "" -"<p>선택한 키로 추가 기능 제품의 <b>모든 패키지에 서명</b>하려면 선택하십시" -"오. 이전의 모든 패키지 서명은 제거됩니다.</p>" +#. help text for signing dialog, cont. +#: src/include/add-on-creator/helps.rb:166 +msgid "<p>Decide if you want to <b>Sign All Packages</b> of the add-on product with the selected key. All previous package signatures will be removed.</p>" +msgstr "<p>선택한 키로 추가 기능 제품의 <b>모든 패키지에 서명</b>하려면 선택하십시오. 이전의 모든 패키지 서명은 제거됩니다.</p>" -#. help text for generating new key dialog -#: src/include/add-on-creator/helps.rb:170 -msgid "" -"<p>Enter the values necessary for generating the new primary key pair.</p>" +#. help text for generating new key dialog +#: src/include/add-on-creator/helps.rb:170 +msgid "<p>Enter the values necessary for generating the new primary key pair.</p>" msgstr "<p>새 기본 키 쌍을 생성하는 데 필요한 값을 입력합니다.</p>" -#. help text for generating new key dialog, cont. -#: src/include/add-on-creator/helps.rb:174 -msgid "" -"<p>The default size of a DSA key is 1024 bits. RSA keys may be between 1024 " -"and 4096 bits long.</p>" -msgstr "" -"<p>DSA 키의 기본 크기는 1024비트입니다. RSA 키 길이는 1024 - 4096비트 사이입" -"니다.</p>" +#. help text for generating new key dialog, cont. +#: src/include/add-on-creator/helps.rb:174 +msgid "<p>The default size of a DSA key is 1024 bits. RSA keys may be between 1024 and 4096 bits long.</p>" +msgstr "<p>DSA 키의 기본 크기는 1024비트입니다. RSA 키 길이는 1024 - 4096비트 사이입니다.</p>" -#. help text for generating new key dialog, cont. -#: src/include/add-on-creator/helps.rb:178 -msgid "" -"<p>As <b>Expiration Date</b>, enter the number of days after which the key " -"expires. If the number is followed by <tt>w</tt>,<tt>m</tt>, or <tt>y</tt>, " -"it indicates the number of weeks, months, or years. Leave the entry empty " -"for a key that never expires.</p>" -msgstr "" -"<p><b>만료 일자</b>로 해당 키가 그 이후에 만기될 때까지 남은 일 수를 입력합니" -"다. 숫자 다음에 <tt>w</tt>,<tt>m</tt> 또는 <tt>y</tt>가 오면 이는 주, 달 또" -"는 년도 수를 나타냅니다. 만료 일자가 없는 키에 대해서는 항목을 비워 둡니다." +#. help text for generating new key dialog, cont. +#: src/include/add-on-creator/helps.rb:178 +msgid "<p>As <b>Expiration Date</b>, enter the number of days after which the key expires. If the number is followed by <tt>w</tt>,<tt>m</tt>, or <tt>y</tt>, it indicates the number of weeks, months, or years. Leave the entry empty for a key that never expires.</p>" +msgstr "<p><b>만료 일자</b>로 해당 키가 그 이후에 만기될 때까지 남은 일 수를 입력합니다. 숫자 다음에 <tt>w</tt>,<tt>m</tt> 또는 <tt>y</tt>가 오면 이는 주, 달 또는 년도 수를 나타냅니다. 만료 일자가 없는 키에 대해서는 항목을 비워 둡니다.</p>" -#. help text for generating new key dialog, cont. -#: src/include/add-on-creator/helps.rb:182 -msgid "" -"<p>Use <b>Name</b>, <b>Comment</b>, and <b>E-Mail Address</b> to provide the " -"user identification with which the new key should be associated.</p>" -msgstr "" -"<p>새 키와 연관시킬 사용자 ID를 제공하려면 <b>이름</b>, <b>설명</b> 및 <b>전" -"자 메일 주소</b>를 사용합니다.</p>" +#. help text for generating new key dialog, cont. +#: src/include/add-on-creator/helps.rb:182 +msgid "<p>Use <b>Name</b>, <b>Comment</b>, and <b>E-Mail Address</b> to provide the user identification with which the new key should be associated.</p>" +msgstr "<p>새 키와 연관시킬 사용자 ID를 제공하려면 <b>이름</b>, <b>설명</b> 및 <b>전자 메일 주소</b>를 사용합니다.</p>" -#. help text for overview dialog -#: src/include/add-on-creator/helps.rb:186 -msgid "" -"<p>Here, see the overview of data for generating the add-on product.</p>" -msgstr "" -"<p>여기에서는 추가 기능 제품을 생성하기 위한 데이터의 개요를 볼 수 있습니다." -"</p>" +#. help text for overview dialog +#: src/include/add-on-creator/helps.rb:186 +msgid "<p>Here, see the overview of data for generating the add-on product.</p>" +msgstr "<p>여기에서는 추가 기능 제품을 생성하기 위한 데이터의 개요를 볼 수 있습니다.</p>" -#. help text for overview dialog, cont. -#: src/include/add-on-creator/helps.rb:190 -msgid "" -"<p>Press <b>Finish</b> to create the add-on product in the output directory." -"</p>" -msgstr "" -"<p>출력 디렉토리에서 추가 기능 제품을 만들려면 <b>완료</b>를 누릅니다.</p>" +#. help text for overview dialog, cont. +#: src/include/add-on-creator/helps.rb:190 +msgid "<p>Press <b>Finish</b> to create the add-on product in the output directory.</p>" +msgstr "<p>출력 디렉토리에서 추가 기능 제품을 만들려면 <b>완료</b>를 누릅니다.</p>" -#. text entry label -#: src/include/add-on-creator/patterns.rb:113 +#. text entry label +#: src/include/add-on-creator/patterns.rb:113 msgid "&Name of the New Pattern" msgstr "새 패턴의 이름(&N)" -#. combo box label -#: src/include/add-on-creator/patterns.rb:118 +#. combo box label +#: src/include/add-on-creator/patterns.rb:118 msgid "&Architecture" msgstr "아키텍처(&A)" -#. text entry label -#: src/include/add-on-creator/patterns.rb:128 +#. text entry label +#: src/include/add-on-creator/patterns.rb:128 msgid "&Release" msgstr "릴리스(&R)" -#. popup message -#: src/include/add-on-creator/patterns.rb:150 +#. popup message +#: src/include/add-on-creator/patterns.rb:150 msgid "" "Such a pattern already exists.\n" "Choose a different name or architecture.\n" @@ -1428,25 +1274,25 @@ "이러한 패턴이 이미 있습니다.\n" "다른 이름 또는 아키텍처를 선택하십시오.\n" -#: src/include/add-on-creator/patterns.rb:198 +#: src/include/add-on-creator/patterns.rb:198 msgid "&Description" msgstr "설명(&D)" -#: src/include/add-on-creator/patterns.rb:202 +#: src/include/add-on-creator/patterns.rb:202 msgid "&Summary" msgstr "요약(&S)" -#: src/include/add-on-creator/patterns.rb:203 +#: src/include/add-on-creator/patterns.rb:203 msgid "Ca&tegory" msgstr "범주(&T)" -#. combo label -#: src/include/add-on-creator/patterns.rb:213 +#. combo label +#: src/include/add-on-creator/patterns.rb:213 msgid "&Language Code" msgstr "언어 코드(&L)" -#. popup message -#: src/include/add-on-creator/patterns.rb:257 +#. popup message +#: src/include/add-on-creator/patterns.rb:257 msgid "" "A key with this name already exists.\n" "Choose a different one." @@ -1454,33 +1300,33 @@ "이 이름을 가진 키가 이미 존재합니다.\n" "다른 이름을 선택하십시오." -#. dialog caption -#: src/include/add-on-creator/patterns.rb:319 +#. dialog caption +#: src/include/add-on-creator/patterns.rb:319 msgid "Editor for Patterns" msgstr "패턴의 편집자" -#. table header -#: src/include/add-on-creator/patterns.rb:332 +#. table header +#: src/include/add-on-creator/patterns.rb:332 msgid "Name of the Pattern" msgstr "패턴의 이름" -#. table header -#: src/include/add-on-creator/patterns.rb:334 +#. table header +#: src/include/add-on-creator/patterns.rb:334 msgid "Full Name" msgstr "전체 이름" -#. check box label -#: src/include/add-on-creator/patterns.rb:369 +#. check box label +#: src/include/add-on-creator/patterns.rb:369 msgid "R&equired Pattern" msgstr "필수 패턴(&E)" -#. popup for file selection dialog -#: src/include/add-on-creator/patterns.rb:445 +#. popup for file selection dialog +#: src/include/add-on-creator/patterns.rb:445 msgid "Existing Pattern" msgstr "기존 패턴" -#. error message -#: src/include/add-on-creator/patterns.rb:601 +#. error message +#: src/include/add-on-creator/patterns.rb:601 msgid "" "Such a pattern already exists.\n" "Choose a different architecture.\n" @@ -1488,369 +1334,315 @@ "이러한 패턴이 이미 있습니다.\n" "다른 아키텍처를 선택하십시오.\n" -#. busy message -#: src/include/add-on-creator/wizards.rb:53 +#. busy message +#: src/include/add-on-creator/wizards.rb:53 msgid "Importing product..." msgstr "제품 가져오는 중..." -#. label of content file key -#: src/modules/AddOnCreator.rb:139 +#. label of content file key +#: src/modules/AddOnCreator.rb:139 msgid "Content file style" msgstr "컨텐트 파일 스타일" -#. help text for content file CONTENTSTYLE key -#: src/modules/AddOnCreator.rb:141 +#. help text for content file CONTENTSTYLE key +#: src/modules/AddOnCreator.rb:141 msgid "Must be the first tag of the content file." msgstr "컨텐트 파일의 첫 번째 태그여야 합니다." -#. label of content file key -#: src/modules/AddOnCreator.rb:150 +#. label of content file key +#: src/modules/AddOnCreator.rb:150 msgid "Product name" msgstr "제품 이름" -#. help text for content file 'NAME' key -#: src/modules/AddOnCreator.rb:152 +#. help text for content file 'NAME' key +#: src/modules/AddOnCreator.rb:152 msgid "For internal usage. Same restrictions as for package names apply." msgstr "내부용입니다. 패키지 이름과 동일한 제한 사항이 적용됩니다." -#. label of content file BASEARCHS key -#: src/modules/AddOnCreator.rb:160 +#. label of content file BASEARCHS key +#: src/modules/AddOnCreator.rb:160 msgid "Product architectures" msgstr "제품 아키텍처" -#. help text for content file 'BASEARCHS' key -#: src/modules/AddOnCreator.rb:164 -msgid "" -"Space-separated list of product architectures. Matches the available product-" -"release packages architectures. " -msgstr "" -"공백으로 구분된 제품 아키텍처 목록입니다. 사용 가능한 제품 릴리스 패키지 아키" -"텍처와 일치합니다." +#. help text for content file 'BASEARCHS' key +#: src/modules/AddOnCreator.rb:164 +msgid "Space-separated list of product architectures. Matches the available product-release packages architectures. " +msgstr "공백으로 구분된 제품 아키텍처 목록입니다. 사용 가능한 제품 릴리스 패키지 아키텍처와 일치합니다." -#. label of content file 'VERSION' key -#: src/modules/AddOnCreator.rb:172 +#. label of content file 'VERSION' key +#: src/modules/AddOnCreator.rb:172 msgid "Product version and release" msgstr "제품 버전 및 릴리스" -#. help text for content file 'VERSION' key -#: src/modules/AddOnCreator.rb:176 +#. help text for content file 'VERSION' key +#: src/modules/AddOnCreator.rb:176 msgid "Product version and release as in RPM <tt>major.minor-release</tt>." msgstr "RPM 형식의 제품 버전 및 릴리스(<tt>주.부 릴리스</tt>)입니다." -#. table item label -#. table item label -#: src/modules/AddOnCreator.rb:185 src/modules/AddOnCreator.rb:720 +#. table item label +#. table item label +#: src/modules/AddOnCreator.rb:185 src/modules/AddOnCreator.rb:720 msgid "Release number" msgstr "릴리스 번호" -#. label of content file key -#: src/modules/AddOnCreator.rb:192 +#. label of content file key +#: src/modules/AddOnCreator.rb:192 msgid "Distribution name" msgstr "배포 이름" -#. help text for content file 'DISTRIBUTION' key -#: src/modules/AddOnCreator.rb:194 -msgid "" -"Some string denoting the distribution. The same string is most probably used " -"in the .rpms to denote the distribution. Usually a composition of the name, " -"version and architecture." -msgstr "" -"일부 스트링은 배포판을 나타냅니다. 동일한 스트링은 대부분 .rpm에서 배포판을 " -"나타내기 위해 사용됩니다. 일반적으로 이 스트링은 이름, 버전 및 아키텍처를 함" -"께 사용하여 만들어집니다." +#. help text for content file 'DISTRIBUTION' key +#: src/modules/AddOnCreator.rb:194 +msgid "Some string denoting the distribution. The same string is most probably used in the .rpms to denote the distribution. Usually a composition of the name, version and architecture." +msgstr "일부 스트링은 배포판을 나타냅니다. 동일한 스트링은 대부분 .rpm에서 배포판을 나타내기 위해 사용됩니다. 일반적으로 이 스트링은 이름, 버전 및 아키텍처를 함께 사용하여 만들어집니다." -#. label of content file key -#: src/modules/AddOnCreator.rb:201 +#. label of content file key +#: src/modules/AddOnCreator.rb:201 msgid "Package description directory" msgstr "패키지 설명 디렉토리" -#. help text for content file 'DESCRDIR' key -#: src/modules/AddOnCreator.rb:206 +#. help text for content file 'DESCRDIR' key +#: src/modules/AddOnCreator.rb:206 msgid "Package description directory (relative to product directory)." msgstr "패키지 설명 디렉토리입니다(제품 디렉토리에 따라 다름)." -#. label of content file key -#: src/modules/AddOnCreator.rb:214 +#. label of content file key +#: src/modules/AddOnCreator.rb:214 msgid "Package data directory" msgstr "패키지 데이터 디렉토리" -#. help text for content file 'DATADIR' key -#: src/modules/AddOnCreator.rb:216 +#. help text for content file 'DATADIR' key +#: src/modules/AddOnCreator.rb:216 msgid "Package data directory (relative to product directory)." msgstr "패키지 데이터 디렉토리입니다(제품 디렉토리에 따라 다름)." -#. label of content file key -#: src/modules/AddOnCreator.rb:225 +#. label of content file key +#: src/modules/AddOnCreator.rb:225 msgid "Label" msgstr "레이블" -#. help text for content file '' key -#: src/modules/AddOnCreator.rb:227 -msgid "" -"UTF-8 encoded label. Default label if <b>LINGUAS</b> is omitted or no " -"default language can be determined." -msgstr "" -"UTF-8 인코딩 레이블입니다. <b>LINGUAS</b>가 생략되었거나 기본 언어를 결정할 " -"수 없는 경우의 기본 레이블입니다." +#. help text for content file '' key +#: src/modules/AddOnCreator.rb:227 +msgid "UTF-8 encoded label. Default label if <b>LINGUAS</b> is omitted or no default language can be determined." +msgstr "UTF-8 인코딩 레이블입니다. <b>LINGUAS</b>가 생략되었거나 기본 언어를 결정할 수 없는 경우의 기본 레이블입니다." -#. label of content file 'LINGUAS' key -#: src/modules/AddOnCreator.rb:234 +#. label of content file 'LINGUAS' key +#: src/modules/AddOnCreator.rb:234 msgid "Languages" msgstr "언어" -#. help text for content file 'LINGUAS' key -#: src/modules/AddOnCreator.rb:236 +#. help text for content file 'LINGUAS' key +#: src/modules/AddOnCreator.rb:236 msgid "ISO language code or language code_country code." msgstr "ISO 언어 코드 또는 언어 코드_국가 코드입니다." -#. label of content file 'LANGUAGE' key -#: src/modules/AddOnCreator.rb:243 +#. label of content file 'LANGUAGE' key +#: src/modules/AddOnCreator.rb:243 msgid "Default language" msgstr "기본 언어" -#. help text for content file 'LANGUAGE' key -#: src/modules/AddOnCreator.rb:247 +#. help text for content file 'LANGUAGE' key +#: src/modules/AddOnCreator.rb:247 msgid "Default language code." msgstr "기본 언어 코드입니다." -#. label of content file 'PATTERNS' key -#: src/modules/AddOnCreator.rb:256 +#. label of content file 'PATTERNS' key +#: src/modules/AddOnCreator.rb:256 msgid "Preselected patterns" msgstr "미리 선택된 패턴" -#. help text for content file 'PATTERNS' key -#: src/modules/AddOnCreator.rb:260 +#. help text for content file 'PATTERNS' key +#: src/modules/AddOnCreator.rb:260 msgid "List of patterns preselected by the product." msgstr "제품에서 미리 선택된 패턴 목록." -#. label of content file key -#: src/modules/AddOnCreator.rb:267 +#. label of content file key +#: src/modules/AddOnCreator.rb:267 msgid "Vendor name" msgstr "제조업체 이름" -#. help text for content file 'VENDOR' key -#: src/modules/AddOnCreator.rb:269 +#. help text for content file 'VENDOR' key +#: src/modules/AddOnCreator.rb:269 msgid "Vendor name (free form)." msgstr "제조업체 이름(자유 형식)입니다." -#. label of content file 'RELNOTESURL' key -#: src/modules/AddOnCreator.rb:277 +#. label of content file 'RELNOTESURL' key +#: src/modules/AddOnCreator.rb:277 msgid "Release notes URL" msgstr "릴리스 정보 URL" -#. help text for content file 'RELNOTESURL' key -#: src/modules/AddOnCreator.rb:281 +#. help text for content file 'RELNOTESURL' key +#: src/modules/AddOnCreator.rb:281 msgid "URL from which to fetch release notes." msgstr "릴리스 정보를 가져올 URL입니다." -#. label of content file 'UPDATEURLS' key -#: src/modules/AddOnCreator.rb:288 +#. label of content file 'UPDATEURLS' key +#: src/modules/AddOnCreator.rb:288 msgid "Update URL" msgstr "업데이트 URL" -#. help text for content file 'UPDATEURLS' key -#: src/modules/AddOnCreator.rb:290 +#. help text for content file 'UPDATEURLS' key +#: src/modules/AddOnCreator.rb:290 msgid "URL of the update source." msgstr "업데이트 원본의 URL입니다." -#. label of content file LABEL.lang key -#: src/modules/AddOnCreator.rb:300 +#. label of content file LABEL.lang key +#: src/modules/AddOnCreator.rb:300 msgid "Language-specific label" msgstr "언어별 레이블" -#. help text for content file 'LABEL.lang' key -#: src/modules/AddOnCreator.rb:304 -msgid "" -"UTF-8-encoded <b>LABEL</b>. <tt>lang</tt> has the same syntax as the " -"<b>LINGUAS</b> values. For each language in <b>LINGUAS</b>, a matching " -"<b>LABEL.lang</b> is expected." -msgstr "" -"UTF-8로 인코딩된 <b>LABEL</b>. <tt>lang</tt>은 <b>LINGUAS</b> 값과 동일한 구" -"문을 갖습니다. <b>LINGUAS</b>의 각 언어에 대해 일치하는 <b>LABEL.lang</b>이 " -"존재합니다." +#. help text for content file 'LABEL.lang' key +#: src/modules/AddOnCreator.rb:304 +msgid "UTF-8-encoded <b>LABEL</b>. <tt>lang</tt> has the same syntax as the <b>LINGUAS</b> values. For each language in <b>LINGUAS</b>, a matching <b>LABEL.lang</b> is expected." +msgstr "UTF-8로 인코딩된 <b>LABEL</b>. <tt>lang</tt>은 <b>LINGUAS</b> 값과 동일한 구문을 갖습니다. <b>LINGUAS</b>의 각 언어에 대해 일치하는 <b>LABEL.lang</b>이 존재합니다." -#: src/modules/AddOnCreator.rb:328 +#: src/modules/AddOnCreator.rb:328 msgid "Architecture" msgstr "아키텍처" -#. label for 'Sum' key -#: src/modules/AddOnCreator.rb:338 src/modules/AddOnCreator.rb:589 +#. label for 'Sum' key +#: src/modules/AddOnCreator.rb:338 src/modules/AddOnCreator.rb:589 msgid "Summary" msgstr "요약" -#. help text for 'Sum' pattern key -#: src/modules/AddOnCreator.rb:340 +#. help text for 'Sum' pattern key +#: src/modules/AddOnCreator.rb:340 msgid "One line label in the default language" msgstr "기본 언어의 한 줄 레이블" -#. help text for 'Sum.lang' pattern key -#: src/modules/AddOnCreator.rb:344 +#. help text for 'Sum.lang' pattern key +#: src/modules/AddOnCreator.rb:344 msgid "One line language-specific label." msgstr "한 줄로 이루어진 언어별 레이블입니다." -#. help text for 'Des' pattern key -#: src/modules/AddOnCreator.rb:354 +#. help text for 'Des' pattern key +#: src/modules/AddOnCreator.rb:354 msgid "Multiple line description in the default language" msgstr "기본 언어로 작성된 여러 줄의 설명" -#. help text for 'Des.lang' pattern key -#: src/modules/AddOnCreator.rb:358 +#. help text for 'Des.lang' pattern key +#: src/modules/AddOnCreator.rb:358 msgid "Multiple line description, language-specific." msgstr "언어별 다중 행 설명." -#. label for 'Cat' pattern key -#: src/modules/AddOnCreator.rb:364 +#. label for 'Cat' pattern key +#: src/modules/AddOnCreator.rb:364 msgid "Category" msgstr "범주" -#. help text for 'Cat' pattern key -#: src/modules/AddOnCreator.rb:366 -msgid "" -"One line category in the default language used to group patterns. Categories " -"are intended for the user and can be specified freely." -msgstr "" -"기본 언어로 된 한 줄의 범주로 패턴을 그룹으로 묶는 데 사용됩니다. 범주는 사용" -"자를 위한 것으로 자유롭게 지정할 수 있습니다." +#. help text for 'Cat' pattern key +#: src/modules/AddOnCreator.rb:366 +msgid "One line category in the default language used to group patterns. Categories are intended for the user and can be specified freely." +msgstr "기본 언어로 된 한 줄의 범주로 패턴을 그룹으로 묶는 데 사용됩니다. 범주는 사용자를 위한 것으로 자유롭게 지정할 수 있습니다." -#. help text for 'Cat.lang' pattern key -#: src/modules/AddOnCreator.rb:370 +#. help text for 'Cat.lang' pattern key +#: src/modules/AddOnCreator.rb:370 msgid "Language-specific version of the category." msgstr "언어별 범주의 버전입니다." -#. label for 'Vis' pattern key -#: src/modules/AddOnCreator.rb:377 +#. label for 'Vis' pattern key +#: src/modules/AddOnCreator.rb:377 msgid "Visibility" msgstr "가시성" -#. help text for 'Vis' pattern key -#: src/modules/AddOnCreator.rb:379 +#. help text for 'Vis' pattern key +#: src/modules/AddOnCreator.rb:379 msgid "Set whether the pattern should be visible in the user interface." msgstr "사용자 인터페이스에 패턴이 표시되는지 여부를 설정합니다." -#. label for 'Prq' pattern key -#: src/modules/AddOnCreator.rb:388 +#. label for 'Prq' pattern key +#: src/modules/AddOnCreator.rb:388 msgid "Packages" msgstr "패키지" -#. help text for 'Prq' pattern key -#: src/modules/AddOnCreator.rb:390 +#. help text for 'Prq' pattern key +#: src/modules/AddOnCreator.rb:390 msgid "List of packages to install." msgstr "설치할 패키지 목록입니다." -#. label for 'Prc' pattern key -#: src/modules/AddOnCreator.rb:398 +#. label for 'Prc' pattern key +#: src/modules/AddOnCreator.rb:398 msgid "Recommended packages" msgstr "추천 패키지" -#. help text for 'Prc' pattern key -#: src/modules/AddOnCreator.rb:400 -msgid "" -"These packages are installed by default but can be removed without complaint." +#. help text for 'Prc' pattern key +#: src/modules/AddOnCreator.rb:400 +msgid "These packages are installed by default but can be removed without complaint." msgstr "이 패키지는 기본적으로 설치되지만 조건 없이 제거할 수 있습니다." -#. label for 'Prs' pattern key -#: src/modules/AddOnCreator.rb:408 +#. label for 'Prs' pattern key +#: src/modules/AddOnCreator.rb:408 msgid "Suggested packages" msgstr "제안 패키지" -#. help text for 'Prs' pattern key -#. help text for 'Sug' pattern key -#. help text for 'SUGGESTS' key -#: src/modules/AddOnCreator.rb:410 src/modules/AddOnCreator.rb:503 -#: src/modules/AddOnCreator.rb:712 -msgid "" -"These are just hints for an application and not handled during dependency " -"resolution." -msgstr "" -"이들은 단지 응용 프로그램에 대한 참고 사항일 뿐이며 종속성 도출 시 처리되지 " -"않습니다." +#. help text for 'Prs' pattern key +#. help text for 'Sug' pattern key +#. help text for 'SUGGESTS' key +#: src/modules/AddOnCreator.rb:410 src/modules/AddOnCreator.rb:503 +#: src/modules/AddOnCreator.rb:712 +msgid "These are just hints for an application and not handled during dependency resolution." +msgstr "이들은 단지 응용 프로그램에 대한 참고 사항일 뿐이며 종속성 도출 시 처리되지 않습니다." -#. label for 'Ico' pattern key -#: src/modules/AddOnCreator.rb:418 +#. label for 'Ico' pattern key +#: src/modules/AddOnCreator.rb:418 msgid "Icon filename" msgstr "아이콘 파일 이름" -#. help text for 'Ico' pattern key -#: src/modules/AddOnCreator.rb:420 +#. help text for 'Ico' pattern key +#: src/modules/AddOnCreator.rb:420 msgid "" "If unspecified, the pattern name is used \n" -" instead (with blanks in the name replaced by underscores). If the filename " -"does not include a .png or .jpg extension, .png is appended. If no path is " -"specified, icons are searched for in the theme icon path (first /usr/share/" -"YaST2/theme/current/icons/32x32/apps/ then /usr/share/YaST2/theme/current/" -"icons/48x48/apps/). Absolute and relative paths (to the theme path /usr/" -"share/YaST2/theme/current/) are allowed." +" instead (with blanks in the name replaced by underscores). If the filename does not include a .png or .jpg extension, .png is appended. If no path is specified, icons are searched for in the theme icon path (first /usr/share/YaST2/theme/current/icons/32x32/apps/ then /usr/share/YaST2/theme/current/icons/48x48/apps/). Absolute and relative paths (to the theme path /usr/share/YaST2/theme/current/) are allowed." msgstr "" "지정하지 않으면 대신 패턴 이름이 \n" -" 사용됩니다(이름 안의 공백은 밑줄로 대체됨). 파일 이름에 .png 또는 .jpg 확장" -"명이 없으면 .png가 추가됩니다. 경로를 지정하지 않으면 테마 아이콘 경로에서 아" -"이콘을 찾습니다(먼저 /usr/share/YaST2/theme/current/icons/32x32/apps/를 검색" -"하고 다음으로 /usr/share/YaST2/theme/current/icons/48x48/apps/를 검색). 테마 " -"경로 /usr/share/YaST2/theme/current/에 대한 절대 및 상대 경로가 허용됩니다." +" 사용됩니다(이름 안의 공백은 밑줄로 대체됨). 파일 이름에 .png 또는 .jpg 확장명이 없으면 .png가 추가됩니다. 경로를 지정하지 않으면 테마 아이콘 경로에서 아이콘을 찾습니다(먼저 /usr/share/YaST2/theme/current/icons/32x32/apps/를 검색하고 다음으로 /usr/share/YaST2/theme/current/icons/48x48/apps/를 검색). 테마 경로 /usr/share/YaST2/theme/current/에 대한 절대 및 상대 경로가 허용됩니다." -#. label for 'Ord' pattern key -#: src/modules/AddOnCreator.rb:429 +#. label for 'Ord' pattern key +#: src/modules/AddOnCreator.rb:429 msgid "Pattern Order" msgstr "패턴 순서" -#. help text for 'Ord' pattern key -#: src/modules/AddOnCreator.rb:431 -msgid "" -"This three-digit integer value defines the order of the pattern when listing " -"multiple patterns in the user interface." -msgstr "" -"이 3자리 정수 값은 사용자 인터페이스에 여러 패턴을 나열할 때 패턴 순서를 정의" -"합니다." +#. help text for 'Ord' pattern key +#: src/modules/AddOnCreator.rb:431 +msgid "This three-digit integer value defines the order of the pattern when listing multiple patterns in the user interface." +msgstr "이 3자리 정수 값은 사용자 인터페이스에 여러 패턴을 나열할 때 패턴 순서를 정의합니다." -#. label for 'Req' pattern key -#: src/modules/AddOnCreator.rb:441 +#. label for 'Req' pattern key +#: src/modules/AddOnCreator.rb:441 msgid "Required patterns" msgstr "필수 패턴" -#. help text for 'Req' pattern key -#: src/modules/AddOnCreator.rb:443 +#. help text for 'Req' pattern key +#: src/modules/AddOnCreator.rb:443 msgid "Patterns that need to be installed together with this pattern." msgstr "이 패턴과 함께 설치해야 하는 패턴입니다." -#. label for 'Prv' pattern key -#: src/modules/AddOnCreator.rb:451 +#. label for 'Prv' pattern key +#: src/modules/AddOnCreator.rb:451 msgid "Provided patterns" msgstr "제공 패턴" -#. help text for 'Prv' pattern key -#: src/modules/AddOnCreator.rb:453 -msgid "" -"Capabilities this pattern provides. They can be used to match <b>REQUIRES from others. Every resolvable has a provide by default--its own name and " -"edition. For example, package <i>bar-1.42-1</i> provides the capability " -"<tt>bar = 1.42-1</tt>." -msgstr "" -"이 패턴에서 제공하는 기능입니다. 이를 통해 다른 제품의 <b>REQUIRES</b>와 일치" -"시킬 수 있습니다. 모든 프로그램은 기본적으로 자신의 고유 이름과 에디션을 제공" -"합니다. 예를 들어 <i>bar-1.42-1</i> 패키지는 <tt>bar = 1.42-1</tt> 기능을 제" -"공합니다." +#. help text for 'Prv' pattern key +#: src/modules/AddOnCreator.rb:453 +msgid "Capabilities this pattern provides. They can be used to match <b>REQUIRES</b> from others. Every resolvable has a provide by default--its own name and edition. For example, package <i>bar-1.42-1</i> provides the capability <tt>bar = 1.42-1</tt>." +msgstr "이 패턴에서 제공하는 기능입니다. 이를 통해 다른 제품의 <b>REQUIRES</b>와 일치시킬 수 있습니다. 모든 프로그램은 기본적으로 자신의 고유 이름과 에디션을 제공합니다. 예를 들어 <i>bar-1.42-1</i> 패키지는 <tt>bar = 1.42-1</tt> 기능을 제공합니다." -#. label for 'Con' pattern key -#: src/modules/AddOnCreator.rb:461 +#. label for 'Con' pattern key +#: src/modules/AddOnCreator.rb:461 msgid "Conflicting patterns" msgstr "충돌 패턴" -#. help text for 'Con' pattern key -#: src/modules/AddOnCreator.rb:463 -msgid "" -"This pattern cannot be installed if the specified resolvable or one that " -"provides the capability is installed." -msgstr "" -"지정된 프로그램이나 해당 기능을 제공하는 프로그램이 설치되어 있으면 이 패턴" -"을 설치할 수 없습니다." +#. help text for 'Con' pattern key +#: src/modules/AddOnCreator.rb:463 +msgid "This pattern cannot be installed if the specified resolvable or one that provides the capability is installed." +msgstr "지정된 프로그램이나 해당 기능을 제공하는 프로그램이 설치되어 있으면 이 패턴을 설치할 수 없습니다." -#. label for 'Obs' pattern key -#: src/modules/AddOnCreator.rb:471 +#. label for 'Obs' pattern key +#: src/modules/AddOnCreator.rb:471 msgid "Patterns made obsolete" msgstr "사용할 수 없는 패턴" -#. help text for 'Obs' pattern key -#: src/modules/AddOnCreator.rb:473 +#. help text for 'Obs' pattern key +#: src/modules/AddOnCreator.rb:473 msgid "" "When this pattern is installed, it uninstalls any \n" "other patterns marked as obsolete here." @@ -1858,323 +1650,274 @@ "이 패턴을 설치하면 여기서 폐기로 표시한 다른\n" "패턴들이 모두 제거됩니다." -#. label for 'Rec' pattern key -#: src/modules/AddOnCreator.rb:481 +#. label for 'Rec' pattern key +#: src/modules/AddOnCreator.rb:481 msgid "Recommended patterns" msgstr "추천 패턴" -#. help text for 'Rec' pattern key -#: src/modules/AddOnCreator.rb:483 -msgid "" -"A weak version of REQUIRES. If recommended patterns cannot be installed, no " -"error is shown." -msgstr "" -"REQUIRES의 약한 버전입니다. 추 천 패턴을 설치할 수 없는 경우에도 오류가 표시" -"되지 않습니다." +#. help text for 'Rec' pattern key +#: src/modules/AddOnCreator.rb:483 +msgid "A weak version of REQUIRES. If recommended patterns cannot be installed, no error is shown." +msgstr "REQUIRES의 약한 버전입니다. 추 천 패턴을 설치할 수 없는 경우에도 오류가 표시되지 않습니다." -#. label for 'Sup' pattern key -#: src/modules/AddOnCreator.rb:491 +#. label for 'Sup' pattern key +#: src/modules/AddOnCreator.rb:491 msgid "Supplemented patterns" msgstr "보충 패턴" -#. help text for 'Sup' pattern key -#: src/modules/AddOnCreator.rb:493 -msgid "" -"A reverse <b>Rec</b>. This pattern is installed if the specified capability " -"is provided by an installed resolvable. The dependency resolver installs it. " -"Uninstalling it is silently accepted." -msgstr "" -"역방향 <b>Rec</b>입니다. 설치한 프로그램에서 지정된 기능을 제공하면 이 패턴" -"이 설치됩니다. 종속성 확인자가 설치해 줍니다. 이 패턴의 제거는 자동으로 승인" -"됩니다." +#. help text for 'Sup' pattern key +#: src/modules/AddOnCreator.rb:493 +msgid "A reverse <b>Rec</b>. This pattern is installed if the specified capability is provided by an installed resolvable. The dependency resolver installs it. Uninstalling it is silently accepted." +msgstr "역방향 <b>Rec</b>입니다. 설치한 프로그램에서 지정된 기능을 제공하면 이 패턴이 설치됩니다. 종속성 확인자가 설치해 줍니다. 이 패턴의 제거는 자동으로 승인됩니다." -#. label for 'Sug' pattern key -#: src/modules/AddOnCreator.rb:501 +#. label for 'Sug' pattern key +#: src/modules/AddOnCreator.rb:501 msgid "Suggested patterns" msgstr "제안 패턴" -#. label for 'Fre' pattern key -#: src/modules/AddOnCreator.rb:511 +#. label for 'Fre' pattern key +#: src/modules/AddOnCreator.rb:511 msgid "Freshen" msgstr "새로 고침" -#. help text for 'Fre' pattern key -#: src/modules/AddOnCreator.rb:513 -msgid "" -"The current pattern is only considered for installation if the pattern " -"specified here is installed." +#. help text for 'Fre' pattern key +#: src/modules/AddOnCreator.rb:513 +msgid "The current pattern is only considered for installation if the pattern specified here is installed." msgstr "여기에 지정된 패턴이 설치된 경우 설치에는 현재 패턴만 고려됩니다." -#. label for 'Ext' pattern key -#: src/modules/AddOnCreator.rb:523 +#. label for 'Ext' pattern key +#: src/modules/AddOnCreator.rb:523 msgid "Extends" msgstr "확장" -#. label for 'Inc' pattern key -#: src/modules/AddOnCreator.rb:529 +#. label for 'Inc' pattern key +#: src/modules/AddOnCreator.rb:529 msgid "Includes" msgstr "포함" -#. label for 'Exnh pattern key -#: src/modules/AddOnCreator.rb:535 +#. label for 'Exnh pattern key +#: src/modules/AddOnCreator.rb:535 msgid "Enhanced patterns" msgstr "확장 패턴" -#. label for 'Pcn' pattern key -#: src/modules/AddOnCreator.rb:541 +#. label for 'Pcn' pattern key +#: src/modules/AddOnCreator.rb:541 msgid "Conflicting packages" msgstr "충돌 패키지" -#. label for 'Pob' pattern key -#: src/modules/AddOnCreator.rb:547 +#. label for 'Pob' pattern key +#: src/modules/AddOnCreator.rb:547 msgid "Obsolete packages" msgstr "오래된 패키지" -#. label for 'Pfr' pattern key -#: src/modules/AddOnCreator.rb:553 +#. label for 'Pfr' pattern key +#: src/modules/AddOnCreator.rb:553 msgid "Freshened packages" msgstr "새로운 패키지" -#. label for 'Psp' pattern key -#: src/modules/AddOnCreator.rb:559 +#. label for 'Psp' pattern key +#: src/modules/AddOnCreator.rb:559 msgid "Supplemented packages" msgstr "보충 패키지" -#. label for 'Pen' pattern key -#: src/modules/AddOnCreator.rb:565 +#. label for 'Pen' pattern key +#: src/modules/AddOnCreator.rb:565 msgid "Enhanced packages" msgstr "확장 패키지" -#. help text for 'Des' key -#: src/modules/AddOnCreator.rb:581 +#. help text for 'Des' key +#: src/modules/AddOnCreator.rb:581 msgid "Multiple line package description." msgstr "여러 줄로 된 패키지 설명입니다." -#. help text for 'Sum' key -#: src/modules/AddOnCreator.rb:591 +#. help text for 'Sum' key +#: src/modules/AddOnCreator.rb:591 msgid "The package summary (label), a one line description of the package." msgstr "한 줄로 된 패키지 요약(레이블) 설명입니다." -#. label for 'Ins' key -#: src/modules/AddOnCreator.rb:599 +#. label for 'Ins' key +#: src/modules/AddOnCreator.rb:599 msgid "Installation Notification" msgstr "설치 알림" -#. help text for 'Ins' key -#: src/modules/AddOnCreator.rb:601 -msgid "" -"An informal message shown to the user if the package is selected, such as a " -"test version warning or a commercial license." -msgstr "" -"패키지를 선택하면 사용자에게 표시되는 테스트 버전 경고나 상용 라이센스 같은 " -"정보용 메시지입니다." +#. help text for 'Ins' key +#: src/modules/AddOnCreator.rb:601 +msgid "An informal message shown to the user if the package is selected, such as a test version warning or a commercial license." +msgstr "패키지를 선택하면 사용자에게 표시되는 테스트 버전 경고나 상용 라이센스 같은 정보용 메시지입니다." -#. label for 'Del' key -#: src/modules/AddOnCreator.rb:608 +#. label for 'Del' key +#: src/modules/AddOnCreator.rb:608 msgid "Deletion Notification" msgstr "삭제 알림" -#. help text for 'Del' key -#: src/modules/AddOnCreator.rb:610 -msgid "" -"An informal message shown to the user if the package is selected for " -"deletion, such as a warning that the system is unusable without the package." -msgstr "" -"삭제하기 위해 패키지를 선택하면 사용자에게 표시되는 비공식 메시지입니다(예: " -"해당 패키지가 없으면 시스템을 사용할 수 없다는 내용의 경고)." +#. help text for 'Del' key +#: src/modules/AddOnCreator.rb:610 +msgid "An informal message shown to the user if the package is selected for deletion, such as a warning that the system is unusable without the package." +msgstr "삭제하기 위해 패키지를 선택하면 사용자에게 표시되는 비공식 메시지입니다(예: 해당 패키지가 없으면 시스템을 사용할 수 없다는 내용의 경고)." -#. label for 'Eul' key -#: src/modules/AddOnCreator.rb:617 +#. label for 'Eul' key +#: src/modules/AddOnCreator.rb:617 msgid "EULA" msgstr "EULA" -#. help text for 'Eul' key -#: src/modules/AddOnCreator.rb:619 -msgid "" -"Text of the EULA. This text is displayed before the package installation. If " -"the user does not accept the EULA, the package is not installed." -msgstr "" -"EULA 내용. 이 내용은 패키지가 설치되기 전에 표시됩니다. 사용자가 EULA에 동의" -"하지 않으면 패키지는 설치되지 않습니다." +#. help text for 'Eul' key +#: src/modules/AddOnCreator.rb:619 +msgid "Text of the EULA. This text is displayed before the package installation. If the user does not accept the EULA, the package is not installed." +msgstr "EULA 내용. 이 내용은 패키지가 설치되기 전에 표시됩니다. 사용자가 EULA에 동의하지 않으면 패키지는 설치되지 않습니다." -#. label of key -#: src/modules/AddOnCreator.rb:660 +#. label of key +#: src/modules/AddOnCreator.rb:660 msgid "Products that must be installed" msgstr "설치해야 할 제품" -#. help text for 'REQUIRES' key -#: src/modules/AddOnCreator.rb:662 -msgid "" -"<p>Resolvables that must be installed on the system to meet product " -"requirements.</p>" -msgstr "" -"<p>제품 요구사항을 충족하기 위해 시스템에 설치해야 할 Resolvable입니다.</p>" +#. help text for 'REQUIRES' key +#: src/modules/AddOnCreator.rb:662 +msgid "<p>Resolvables that must be installed on the system to meet product requirements.</p>" +msgstr "<p>제품 요구사항을 충족하기 위해 시스템에 설치해야 할 Resolvable입니다.</p>" -#. label of PROVIDES key -#: src/modules/AddOnCreator.rb:670 +#. label of PROVIDES key +#: src/modules/AddOnCreator.rb:670 msgid "Provided products" msgstr "제공된 제품" -#. help text for 'PROVIDES' key -#: src/modules/AddOnCreator.rb:672 -msgid "" -"Capabilities this product provides. They can be used to match <b>requires from others." -msgstr "" -"이 제품에서 제공하는 기능입니다. 이 기능은 다른 사용자들의 <b>필수사항</b>을 " -"충족시키는 데 사용될 수 있습니다." +#. help text for 'PROVIDES' key +#: src/modules/AddOnCreator.rb:672 +msgid "Capabilities this product provides. They can be used to match <b>requires</b> from others." +msgstr "이 제품에서 제공하는 기능입니다. 이 기능은 다른 사용자들의 <b>필수사항</b>을 충족시키는 데 사용될 수 있습니다." -#. label of 'CONFLICTS' key -#: src/modules/AddOnCreator.rb:680 +#. label of 'CONFLICTS' key +#: src/modules/AddOnCreator.rb:680 msgid "Conflicting products" msgstr "제품 충돌" -#. help text for 'CONFLICTS' key -#: src/modules/AddOnCreator.rb:682 -msgid "" -"This resolvable cannot be installed if the specified resolvable or one that " -"provides the capability is installed." -msgstr "" -"지정된 프로그램이나 해당 기능을 제공하는 프로그램이 설치되어 있으면 이 프로그" -"램을 설치할 수 없습니다." +#. help text for 'CONFLICTS' key +#: src/modules/AddOnCreator.rb:682 +msgid "This resolvable cannot be installed if the specified resolvable or one that provides the capability is installed." +msgstr "지정된 프로그램이나 해당 기능을 제공하는 프로그램이 설치되어 있으면 이 프로그램을 설치할 수 없습니다." -#. label of 'OBSOLETES' key -#: src/modules/AddOnCreator.rb:690 +#. label of 'OBSOLETES' key +#: src/modules/AddOnCreator.rb:690 msgid "Products made obsolete" msgstr "더 이상 사용할 수 없는 제품" -#. help text for 'OBSOLETES' key -#: src/modules/AddOnCreator.rb:692 -msgid "" -"When this resolvable is installed, it uninstalls any other resolvable with a " -"name matching this keyword." -msgstr "" -"이 프로그램이 설치되면 이 키워드와 이름이 일치하는 다른 프로그램이 모두 제거" -"됩니다." +#. help text for 'OBSOLETES' key +#: src/modules/AddOnCreator.rb:692 +msgid "When this resolvable is installed, it uninstalls any other resolvable with a name matching this keyword." +msgstr "이 프로그램이 설치되면 이 키워드와 이름이 일치하는 다른 프로그램이 모두 제거됩니다." -#. label of 'RECOMMENDS' key -#: src/modules/AddOnCreator.rb:700 +#. label of 'RECOMMENDS' key +#: src/modules/AddOnCreator.rb:700 msgid "Recommended products" msgstr "권장되는 제품" -#. help text for 'RECOMMENDS' key -#: src/modules/AddOnCreator.rb:702 -msgid "" -"A weak version of <b>requires</b>. An attempt is made to fulfill " -"<b>RECOMMENDS</b>, but they are silently ignored if no match is possible." -msgstr "" -"<b>필수사항</b>의 무시 가능한 버전입니다. <b>권장사항</b>를 수행하려고 하지" -"만 일치하는 것이 없으면 자동으로 무시됩니다." +#. help text for 'RECOMMENDS' key +#: src/modules/AddOnCreator.rb:702 +msgid "A weak version of <b>requires</b>. An attempt is made to fulfill <b>RECOMMENDS</b>, but they are silently ignored if no match is possible." +msgstr "<b>필수사항</b>의 무시 가능한 버전입니다. <b>권장사항</b>를 수행하려고 하지만 일치하는 것이 없으면 자동으로 무시됩니다." -#. label of 'SUGGESTS' key -#: src/modules/AddOnCreator.rb:710 +#. label of 'SUGGESTS' key +#: src/modules/AddOnCreator.rb:710 msgid "Suggested products" msgstr "제안된 제품" -#. table item label -#: src/modules/AddOnCreator.rb:725 +#. table item label +#: src/modules/AddOnCreator.rb:725 msgid "The URL for release notes RPM" msgstr "릴리스 정보 RPM의 URL" -#. table item label -#: src/modules/AddOnCreator.rb:730 +#. table item label +#: src/modules/AddOnCreator.rb:730 msgid "Product description" msgstr "제품 설명" -#. table item label -#: src/modules/AddOnCreator.rb:740 +#. table item label +#: src/modules/AddOnCreator.rb:740 msgid "Product summary" msgstr "제품 요약" -#. table item label -#: src/modules/AddOnCreator.rb:745 +#. table item label +#: src/modules/AddOnCreator.rb:745 msgid "Product line" msgstr "제품군" -#. help text for 'productline' key -#: src/modules/AddOnCreator.rb:747 -msgid "" -"A short name for the product, which does not change between service packs " -"and versions." +#. help text for 'productline' key +#: src/modules/AddOnCreator.rb:747 +msgid "A short name for the product, which does not change between service packs and versions." msgstr "서비스 팩과 버전 간에 변경하지 않는 짧은 제품 이름입니다." -#. table item label -#: src/modules/AddOnCreator.rb:754 +#. table item label +#: src/modules/AddOnCreator.rb:754 msgid "Update repository key" msgstr "리포지토리 키 업데이트" -#. table item label -#: src/modules/AddOnCreator.rb:759 +#. table item label +#: src/modules/AddOnCreator.rb:759 msgid "Type of media" msgstr "미디어 유형" -#. help text for media type -#: src/modules/AddOnCreator.rb:761 -msgid "" -"Type of media that will be used for target product. Possible values are: cd, " -"ftp, dvd5, dvd9." -msgstr "" -"대상 제품에 사용할 미디어 유형입니다. 가능한 값은 cd, ftp, dvd5, dvd9입니다." +#. help text for media type +#: src/modules/AddOnCreator.rb:761 +msgid "Type of media that will be used for target product. Possible values are: cd, ftp, dvd5, dvd9." +msgstr "대상 제품에 사용할 미디어 유형입니다. 가능한 값은 cd, ftp, dvd5, dvd9입니다." -#. table item label -#: src/modules/AddOnCreator.rb:768 +#. table item label +#: src/modules/AddOnCreator.rb:768 msgid "Product flavor" msgstr "제품 특징" -#. help text for media type -#: src/modules/AddOnCreator.rb:770 +#. help text for media type +#: src/modules/AddOnCreator.rb:770 msgid "Description of the flavor or variant of a product, e.g. DVD, FTP, Live" msgstr "제품의 특징 또는 변형에 대한 설명(예: DVD, FTP, 라이브)" -#. AddOnCreator Build dialog caption -#: src/modules/AddOnCreator.rb:1694 +#. AddOnCreator Build dialog caption +#: src/modules/AddOnCreator.rb:1694 msgid "Generating Product Data" msgstr "제품 데이터 생성 중" -#. Progress stage -#: src/modules/AddOnCreator.rb:1698 +#. Progress stage +#: src/modules/AddOnCreator.rb:1698 msgid "Find package directories" msgstr "패키지 디렉토리 찾기" -#. Progress step -#: src/modules/AddOnCreator.rb:1702 +#. Progress step +#: src/modules/AddOnCreator.rb:1702 msgid "Looking for package directories..." msgstr "패키지 디렉토리 확인 중..." -#. Progress stage -#: src/modules/AddOnCreator.rb:1709 +#. Progress stage +#: src/modules/AddOnCreator.rb:1709 msgid "Check package architectures" msgstr "패키지 아키텍처 확인" -#. Progress stage -#: src/modules/AddOnCreator.rb:1711 +#. Progress stage +#: src/modules/AddOnCreator.rb:1711 msgid "Generate content file defaults" msgstr "컨텐트 파일 기본값 생성" -#. Progress step -#: src/modules/AddOnCreator.rb:1718 +#. Progress step +#: src/modules/AddOnCreator.rb:1718 msgid "Checking package architectures..." msgstr "패키지 아키텍처 확인 중..." -#. Progress step -#: src/modules/AddOnCreator.rb:1720 +#. Progress step +#: src/modules/AddOnCreator.rb:1720 msgid "Generating content file defaults..." msgstr "컨텐트 파일 기본값 생성 중..." -#. Progress stage -#. Progress step -#: src/modules/AddOnCreator.rb:1728 src/modules/AddOnCreator.rb:1735 +#. Progress stage +#. Progress step +#: src/modules/AddOnCreator.rb:1728 src/modules/AddOnCreator.rb:1735 msgid "Generate package descriptions" msgstr "패키지 설명 생성" -#. help text -#: src/modules/AddOnCreator.rb:1746 +#. help text +#: src/modules/AddOnCreator.rb:1746 msgid "<b>Wait while generating data for add-on...</b><br/>\n" -msgstr "" -"<b>추가 기능에 대해 데이터를 생성하는 동안 잠시 기다려 주십시오.</b><br/>\n" +msgstr "<b>추가 기능에 대해 데이터를 생성하는 동안 잠시 기다려 주십시오.</b><br/>\n" -#. error report -#: src/modules/AddOnCreator.rb:2730 +#. error report +#: src/modules/AddOnCreator.rb:2730 msgid "" "Failed to install obs-productconverter package.\n" "Release package will not be generated." @@ -2182,8 +1925,8 @@ "obs-productconverter 패키지를 설치하지 못했습니다.\n" "릴리스 패키지가 생성되지 않습니다." -#. error popup -#: src/modules/AddOnCreator.rb:2923 +#. error popup +#: src/modules/AddOnCreator.rb:2923 msgid "" "Build of release package failed with\n" "'%1'." @@ -2191,18 +1934,18 @@ "릴리스 패키지 작성이\n" "'%1' 때문에 실패했습니다." -#. error label -#: src/modules/AddOnCreator.rb:3283 +#. error label +#: src/modules/AddOnCreator.rb:3283 msgid "Signing of the product failed." msgstr "제품의 서명이 실패했습니다." -#. checkbox label -#: src/modules/AddOnCreator.rb:3301 +#. checkbox label +#: src/modules/AddOnCreator.rb:3301 msgid "Try again with different passphrase" msgstr "다른 암호로 다시 시도" -#. ask for pw now %1 is key id, %2 user name -#: src/modules/AddOnCreator.rb:3857 +#. ask for pw now %1 is key id, %2 user name +#: src/modules/AddOnCreator.rb:3857 msgid "" "Enter passphrase for GPG key %1\n" "(%2)" @@ -2210,102 +1953,102 @@ "GPG 키 %1의 암호를 입력하십시오.\n" "(%2)" -#. AddOnCreator Build dialog caption -#: src/modules/AddOnCreator.rb:3879 +#. AddOnCreator Build dialog caption +#: src/modules/AddOnCreator.rb:3879 msgid "Creating the Add-On" msgstr "추가 기능 만들기" -#. Progress stage -#: src/modules/AddOnCreator.rb:3883 +#. Progress stage +#: src/modules/AddOnCreator.rb:3883 msgid "Write the content file" msgstr "내용 파일 쓰기" -#. Progress stage -#: src/modules/AddOnCreator.rb:3885 +#. Progress stage +#: src/modules/AddOnCreator.rb:3885 msgid "Create the structure of the add-on" msgstr "추가 기능의 구조 만들기" -#. Progress stage -#: src/modules/AddOnCreator.rb:3887 +#. Progress stage +#: src/modules/AddOnCreator.rb:3887 msgid "Write the patterns" msgstr "패턴 쓰기" -#. Progress stage -#: src/modules/AddOnCreator.rb:3889 +#. Progress stage +#: src/modules/AddOnCreator.rb:3889 msgid "Copy the packages" msgstr "패키지 복사" -#. Progress stage -#: src/modules/AddOnCreator.rb:3891 +#. Progress stage +#: src/modules/AddOnCreator.rb:3891 msgid "Generate the release package" msgstr "릴리스 패키지 생성" -#. Progress stage -#: src/modules/AddOnCreator.rb:3893 +#. Progress stage +#: src/modules/AddOnCreator.rb:3893 msgid "Create MD5 sums" msgstr "MD5 합계 만들기" -#. Progress stage -#: src/modules/AddOnCreator.rb:3895 +#. Progress stage +#: src/modules/AddOnCreator.rb:3895 msgid "Sign resulting product" msgstr "최종 제품에 서명" -#. Progress step -#: src/modules/AddOnCreator.rb:3899 +#. Progress step +#: src/modules/AddOnCreator.rb:3899 msgid "Writing the content file..." msgstr "내용 파일 쓰는 중..." -#. Progress step -#: src/modules/AddOnCreator.rb:3901 +#. Progress step +#: src/modules/AddOnCreator.rb:3901 msgid "Creating the structure of the add-on..." msgstr "추가 기능의 구조 만드는 중..." -#. Progress stage -#: src/modules/AddOnCreator.rb:3903 +#. Progress stage +#: src/modules/AddOnCreator.rb:3903 msgid "Writing the patterns..." msgstr "패턴 쓰는 중..." -#. Progress step -#: src/modules/AddOnCreator.rb:3905 +#. Progress step +#: src/modules/AddOnCreator.rb:3905 msgid "Copying the packages..." msgstr "패키지 복사 중..." -#. Progress stage -#: src/modules/AddOnCreator.rb:3907 +#. Progress stage +#: src/modules/AddOnCreator.rb:3907 msgid "Generating the release package..." msgstr "릴리스 패키지 생성 중..." -#. Progress step -#: src/modules/AddOnCreator.rb:3909 +#. Progress step +#: src/modules/AddOnCreator.rb:3909 msgid "Creating MD5 sums..." msgstr "MD5 합계 만드는 중..." -#. Progress stage -#: src/modules/AddOnCreator.rb:3911 +#. Progress stage +#: src/modules/AddOnCreator.rb:3911 msgid "Signing resulting product..." msgstr "최종 제품에 서명 중..." -#. Progress stage -#: src/modules/AddOnCreator.rb:3916 +#. Progress stage +#: src/modules/AddOnCreator.rb:3916 msgid "Create ISO image" msgstr "ISO 이미지 작성" -#. Progress step -#: src/modules/AddOnCreator.rb:3918 +#. Progress step +#: src/modules/AddOnCreator.rb:3918 msgid "Creating ISO image..." msgstr "ISO 이미지 작성 중..." -#. Progress finished -#: src/modules/AddOnCreator.rb:3921 +#. Progress finished +#: src/modules/AddOnCreator.rb:3921 msgid "Finished" msgstr "완료됨" -#. Error message (do not translate 'content' -#: src/modules/AddOnCreator.rb:3957 +#. Error message (do not translate 'content' +#: src/modules/AddOnCreator.rb:3957 msgid "Cannot write content file." msgstr "내용 파일을 작성할 수 없습니다." -#. Error message -#: src/modules/AddOnCreator.rb:3978 +#. Error message +#: src/modules/AddOnCreator.rb:3978 msgid "Cannot create the output directory structure." msgstr "출력 디렉토리 구조를 만들 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/add-on.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/add-on.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/add-on.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,8 +14,8 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. TRANSLATORS: commandline help -#: src/clients/add-on.rb:41 +#. TRANSLATORS: commandline help +#: src/clients/add-on.rb:41 msgid "" "\n" "Add-on Module Help\n" @@ -49,107 +49,102 @@ "cd://\n" "dvd://\n" -#: src/clients/add-on.rb:64 -msgid "" -"Target file name ('xmlfile' option) is missing. Use " -"xmlfile= command line option." -msgstr "" -"대상 파일 이름('xmlfile' 옵션)이 누락되었습니다. xmlfile= 명" -"령줄 옵션을 사용하십시오." +#: src/clients/add-on.rb:64 +msgid "Target file name ('xmlfile' option) is missing. Use xmlfile= command line option." +msgstr "대상 파일 이름('xmlfile' 옵션)이 누락되었습니다. xmlfile= 명령줄 옵션을 사용하십시오." -#. dialog caption -#. this is a heading -#. Cleanup UI - Prepare it for progress callbacks -#: src/clients/add-on.rb:105 src/clients/add-on_proposal.rb:76 -#: src/include/add-on/add-on-workflow.rb:1873 +#. dialog caption +#. this is a heading +#. Cleanup UI - Prepare it for progress callbacks +#: src/clients/add-on.rb:105 src/clients/add-on_proposal.rb:76 +#: src/include/add-on/add-on-workflow.rb:1873 msgid "Add-On Products" msgstr "추가 기능 제품" -#. busy message (dialog) -#. TRANSLATORS: dialog content - a very simple label -#: src/clients/add-on.rb:107 src/clients/inst_language_add-on.rb:155 -#: src/include/add-on/add-on-workflow.rb:1874 +#. busy message (dialog) +#. TRANSLATORS: dialog content - a very simple label +#: src/clients/add-on.rb:107 src/clients/inst_language_add-on.rb:155 +#: src/include/add-on/add-on-workflow.rb:1874 msgid "Initializing..." msgstr "초기화 중..." -#. help -#. TRANSLATORS: help text -#: src/clients/add-on.rb:109 src/clients/inst_language_add-on.rb:157 -#: src/include/add-on/add-on-workflow.rb:1875 +#. help +#. TRANSLATORS: help text +#: src/clients/add-on.rb:109 src/clients/inst_language_add-on.rb:157 +#: src/include/add-on/add-on-workflow.rb:1875 msgid "<p>Initializing add-on products...</p>" msgstr "<p>추가 기능 제품 초기화 중...</p>" -#. Create a summary -#. return string -#: src/clients/add-on_auto.rb:70 +#. Create a summary +#. return string +#: src/clients/add-on_auto.rb:70 msgid "<li>Media: %1, Path: %2, Product: %3</li>\n" msgstr "<li>미디어: %1, 경로: %2, 제품: %3</li>\n" -#. set addon specific sig-handling -#: src/clients/add-on_auto.rb:186 +#. set addon specific sig-handling +#: src/clients/add-on_auto.rb:186 msgid "Make the add-on \"%1\" available via \"%2\"." msgstr "\"%2\"을(를) 통해 \"%1\" 추가 기능을 사용할 수 있게 합니다." -#. just report error -#: src/clients/add-on_auto.rb:193 +#. just report error +#: src/clients/add-on_auto.rb:193 msgid "Failed to add add-on product." msgstr "추가 기능 제품을 추가하지 못했습니다." -#. placeholder for unknown path -#. summary item, %1 is product name, %2 media URL, %3 directory on media -#. placeholder for unknown directory -#. place holder for unknown URL -#. placeholder for unknown path -#. placeholder for unknown URL -#: src/clients/add-on_proposal.rb:35 src/clients/add-on_proposal.rb:41 -#: src/include/add-on/add-on-workflow.rb:369 -#: src/include/add-on/add-on-workflow.rb:379 -#: src/include/add-on/add-on-workflow.rb:935 -#: src/include/add-on/add-on-workflow.rb:944 +#. placeholder for unknown path +#. summary item, %1 is product name, %2 media URL, %3 directory on media +#. placeholder for unknown directory +#. place holder for unknown URL +#. placeholder for unknown path +#. placeholder for unknown URL +#: src/clients/add-on_proposal.rb:35 src/clients/add-on_proposal.rb:41 +#: src/include/add-on/add-on-workflow.rb:369 +#: src/include/add-on/add-on-workflow.rb:379 +#: src/include/add-on/add-on-workflow.rb:935 +#: src/include/add-on/add-on-workflow.rb:944 msgid "Unknown" msgstr "알 수 없음" -#. summary string -#: src/clients/add-on_proposal.rb:47 +#. summary string +#: src/clients/add-on_proposal.rb:47 msgid "No add-on product selected for installation" msgstr "설치를 위해 선택한 추가 기능 제품이 없습니다." -#. this is a menu entry -#: src/clients/add-on_proposal.rb:78 +#. this is a menu entry +#: src/clients/add-on_proposal.rb:78 msgid "Add-&on Products" msgstr "추가 기능 제품(&O)" -#. TRANSLATORS: popup message -#: src/clients/inst_language_add-on.rb:114 +#. TRANSLATORS: popup message +#: src/clients/inst_language_add-on.rb:114 msgid "Installation of the Language Extension has been finished." msgstr "언어 확장의 설치가 완료되었습니다." -#. TRANSLATORS: dialog caption -#. TRANSLATORS: dialog caption -#. main screen heading -#: src/clients/inst_language_add-on.rb:153 -#: src/clients/inst_language_add-on.rb:212 -#: src/include/add-on/add-on-workflow.rb:907 +#. TRANSLATORS: dialog caption +#. TRANSLATORS: dialog caption +#. main screen heading +#: src/clients/inst_language_add-on.rb:153 +#: src/clients/inst_language_add-on.rb:212 +#: src/include/add-on/add-on-workflow.rb:907 msgid "Add-On Product Installation" msgstr "Add-On 설치" -#. TRANSLATORS:: multi-selection box -#: src/clients/inst_language_add-on.rb:219 +#. TRANSLATORS:: multi-selection box +#: src/clients/inst_language_add-on.rb:219 msgid "&Select Language Extensions to Be Installed" msgstr "설치할 언어 확장 선택(&S)" -#. TRANSLATORS: help text -#: src/clients/inst_language_add-on.rb:226 -msgid "" -"<p>Select the language extensions to be installed then click <b>OK</b>.</p>" +#. TRANSLATORS: help text +#: src/clients/inst_language_add-on.rb:226 +msgid "<p>Select the language extensions to be installed then click <b>OK</b>.</p>" msgstr "<p>설치할 언어 확장을 선택하고 <b>확인</b>을 클릭하십시오.</p>" -#. TRANSLATORS: popup question -#: src/clients/inst_language_add-on.rb:245 +#. TRANSLATORS: popup question +#: src/clients/inst_language_add-on.rb:245 msgid "Are you sure you want to abort the add-on product installation?" msgstr "추가 기능 제품 설치를 중단하시겠습니까?" -#: src/clients/inst_language_add-on.rb:260 +#: src/clients/inst_language_add-on.rb:260 msgid "" "There are no selected languages to be installed.\n" "Are you sure you want to abort the installation?" @@ -157,32 +152,32 @@ "설치할 언어가 선택되지 않았습니다.\n" "설치를 중단하시겠습니까?" -#. TRANSLATORS: multiselection box item, %1 stands for 'ar', 'mk', 'zh_TW' -#. it used only as a fallback -#: src/clients/inst_language_add-on.rb:329 +#. TRANSLATORS: multiselection box item, %1 stands for 'ar', 'mk', 'zh_TW' +#. it used only as a fallback +#: src/clients/inst_language_add-on.rb:329 msgid "Language %1" msgstr "언어 %1" -#. TRANSLATORS: error message - the module does not provide command line interface -#: src/clients/vendor.rb:34 +#. TRANSLATORS: error message - the module does not provide command line interface +#: src/clients/vendor.rb:34 msgid "There is no user interface available for this module." msgstr "이 모듈에 대한 유저 인터페이스를 이용할 수 없습니다." -#. VENDOR: main screen heading -#: src/clients/vendor.rb:64 +#. VENDOR: main screen heading +#: src/clients/vendor.rb:64 msgid "Vendor Driver CD" msgstr "제조업체 드라이버 CD" -#. VENDOR: cant mount /dev/cdrom popup -#: src/clients/vendor.rb:84 +#. VENDOR: cant mount /dev/cdrom popup +#: src/clients/vendor.rb:84 msgid "Please insert the vendor CD-ROM" msgstr "제조업체 CD-ROM을 넣으십시오." -#. VENDOR: vendor cd contains wrong data -#. VENDOR: vendor cd contains wrong data -#. VENDOR: vendor cd contains wrong data -#: src/clients/vendor.rb:130 src/clients/vendor.rb:145 -#: src/clients/vendor.rb:202 +#. VENDOR: vendor cd contains wrong data +#. VENDOR: vendor cd contains wrong data +#. VENDOR: vendor cd contains wrong data +#: src/clients/vendor.rb:130 src/clients/vendor.rb:145 +#: src/clients/vendor.rb:202 msgid "" "Could not find driver data on the CD-ROM.\n" "Aborting now." @@ -190,8 +185,8 @@ "CD-ROM에서 드라이버 데이터를 찾을 수 없습니다.\n" "지금 중단하고 있습니다." -#. VENDOR: vendor cd doesn't contain data for current system and linux version -#: src/clients/vendor.rb:177 +#. VENDOR: vendor cd doesn't contain data for current system and linux version +#: src/clients/vendor.rb:177 msgid "" "The CD-ROM data does not match the running Linux system.\n" "Aborting now.\n" @@ -199,13 +194,13 @@ "CD-ROM 데이터가 실행 중인 Linux 시스템과 일치하지 않습니다.\n" "지금 중단합니다.\n" -#. VENDOR: dialog heading -#: src/clients/vendor.rb:262 +#. VENDOR: dialog heading +#: src/clients/vendor.rb:262 msgid "Installing driver..." msgstr "드라이버 설치 중..." -#. VENDOR: popup if installation of driver failed -#: src/clients/vendor.rb:273 +#. VENDOR: popup if installation of driver failed +#: src/clients/vendor.rb:273 msgid "" "The installation failed.\n" "Contact the address on the CD-ROM.\n" @@ -213,13 +208,13 @@ "설치에 실패했습니다.\n" "CD-ROM에 있는 주소로 문의하십시오.\n" -#. VENDOR: message box with number of drivers installed -#: src/clients/vendor.rb:287 +#. VENDOR: message box with number of drivers installed +#: src/clients/vendor.rb:287 msgid "Installed %1 drivers from CD" msgstr "CD에서 설치된 %1개 드라이버" -#. VENDOR: message box with error text -#: src/clients/vendor.rb:292 +#. VENDOR: message box with error text +#: src/clients/vendor.rb:292 msgid "" "No driver data found on the CD-ROM.\n" "Aborting now." @@ -227,51 +222,51 @@ "CD-ROM에 드라이버 데이터가 없습니다.\n" "지금 중단합니다." -#. table cell -#. table cell -#. List of all selected repositories -#. -#. -#. **Structure:** -#. -#. add_on_products = [ -#. $[ -#. "media" : 4, // ID of the source -#. "product_dir" : "/", -#. "product" : "openSUSE version XX.Y", -#. "autoyast_product" : "'PRODUCT' tag for AutoYaST Export", -#. "media_url" : "Zypp URL of the product", -#. ], -#. ... -#. ] -#: src/include/add-on/add-on-workflow.rb:161 -#: src/include/add-on/add-on-workflow.rb:580 -#: src/include/add-on/add-on-workflow.rb:1588 -#: src/include/add-on/add-on-workflow.rb:1600 +#. table cell +#. table cell +#. List of all selected repositories +#. +#. +#. **Structure:** +#. +#. add_on_products = [ +#. $[ +#. "media" : 4, // ID of the source +#. "product_dir" : "/", +#. "product" : "openSUSE version XX.Y", +#. "autoyast_product" : "'PRODUCT' tag for AutoYaST Export", +#. "media_url" : "Zypp URL of the product", +#. ], +#. ... +#. ] +#: src/include/add-on/add-on-workflow.rb:161 +#: src/include/add-on/add-on-workflow.rb:580 +#: src/include/add-on/add-on-workflow.rb:1588 +#: src/include/add-on/add-on-workflow.rb:1600 msgid "No product found in the repository." msgstr "리포지토리에서 제품을 찾을 수 없습니다." -#. error report -#: src/include/add-on/add-on-workflow.rb:314 +#. error report +#: src/include/add-on/add-on-workflow.rb:314 msgid "No software repository found on medium." msgstr "매체에 소프트웨어 리포지토리가 없습니다." -#. busy message -#: src/include/add-on/add-on-workflow.rb:333 +#. busy message +#: src/include/add-on/add-on-workflow.rb:333 msgid "Initializing new source..." msgstr "새 소스 초기화 중..." -#: src/include/add-on/add-on-workflow.rb:374 +#: src/include/add-on/add-on-workflow.rb:374 msgid "URL: %1, Directory: %2" msgstr "URL: %1, 디렉토리: %2" -#. dialog caption -#: src/include/add-on/add-on-workflow.rb:387 +#. dialog caption +#: src/include/add-on/add-on-workflow.rb:387 msgid "Software Repository Selection" msgstr "소프트웨어 리포지토리 선택" -#. help text -#: src/include/add-on/add-on-workflow.rb:389 +#. help text +#: src/include/add-on/add-on-workflow.rb:389 msgid "" "<p><big><b>Software Repository Selection</b></big><br>\n" "Multiple repositories were found on the selected medium.\n" @@ -281,45 +276,45 @@ "선택한 매체에 여러 리포지토리가 있습니다.\n" "사용할 리포지토리를 선택하십시오.</p>\n" -#: src/include/add-on/add-on-workflow.rb:399 +#: src/include/add-on/add-on-workflow.rb:399 msgid "Repositories &Found" msgstr "검색한 리포지토리(&F)" -#. if (Stage::initial()) -#. { -#. if (Popup::ConfirmAbort (`painless)) -#. break; -#. } -#. else -#. { -#. yes-no popup -#: src/include/add-on/add-on-workflow.rb:411 -#: src/include/add-on/add-on-workflow.rb:738 +#. if (Stage::initial()) +#. { +#. if (Popup::ConfirmAbort (`painless)) +#. break; +#. } +#. else +#. { +#. yes-no popup +#: src/include/add-on/add-on-workflow.rb:411 +#: src/include/add-on/add-on-workflow.rb:738 msgid "Really abort add-on product installation?" msgstr "추가 기능 제품 설치를 중단하시겠습니까?" -#. popup message -#: src/include/add-on/add-on-workflow.rb:422 +#. popup message +#: src/include/add-on/add-on-workflow.rb:422 msgid "Select a repository." msgstr "리포지토리를 선택하십시오." -#. message popup -#: src/include/add-on/add-on-workflow.rb:627 +#. message popup +#: src/include/add-on/add-on-workflow.rb:627 msgid "Dependencies of the add-on product cannot be fulfilled." msgstr "추가 기능 제품의 종속성을 이행할 수 없습니다." -#. dialog caption -#: src/include/add-on/add-on-workflow.rb:708 +#. dialog caption +#: src/include/add-on/add-on-workflow.rb:708 msgid "Product Selection" msgstr "제품 선택" -#. multi selection list -#: src/include/add-on/add-on-workflow.rb:714 +#. multi selection list +#: src/include/add-on/add-on-workflow.rb:714 msgid "Available Products" msgstr "사용 가능한 제품" -#. help text -#: src/include/add-on/add-on-workflow.rb:720 +#. help text +#: src/include/add-on/add-on-workflow.rb:720 msgid "" "<p><b><big>Product Selection</big></b><br/>\n" "Multiple products were found in the repository. Select the products\n" @@ -329,13 +324,13 @@ "리포지토리에 여러 제품이 있습니다.\n" "설치할 제품을 선택하십시오.</p>\n" -#. message popup -#: src/include/add-on/add-on-workflow.rb:788 +#. message popup +#: src/include/add-on/add-on-workflow.rb:788 msgid "Dependencies of the selected add-on products cannot be fulfilled." msgstr "선택한 추가 기능 제품의 종속성을 이행할 수 없습니다." -#. Help for add-on products -#: src/include/add-on/add-on-workflow.rb:910 +#. Help for add-on products +#: src/include/add-on/add-on-workflow.rb:910 msgid "" "<p><big><b>Add-On Product Installation</b></big><br/>\n" "Here see all add-on products that are selected for installation.\n" @@ -344,111 +339,106 @@ msgstr "" "<p><big><b>추가 기능 제품 설치</b></big><br/>\n" "여기에는 설치하도록 선택된 추가 기능 제품이 모두 표시됩니다.\n" -"새 제품을 추가하려면 <b>추가</b>를 클릭하십시오. 이미 추가된 제품을 제거하려" -"면 \n" +"새 제품을 추가하려면 <b>추가</b>를 클릭하십시오. 이미 추가된 제품을 제거하려면 \n" "해당 제품을 선택하고 <b>삭제</b>를 클릭하십시오.</p>" -#. table cell, %1 is URL, %2 is directory name -#: src/include/add-on/add-on-workflow.rb:939 +#. table cell, %1 is URL, %2 is directory name +#: src/include/add-on/add-on-workflow.rb:939 msgid "%1, Directory: %2" msgstr "%1, 디렉토리: %2" -#. table header -#: src/include/add-on/add-on-workflow.rb:965 +#. table header +#: src/include/add-on/add-on-workflow.rb:965 msgid "Product" msgstr "제품" -#. table header -#: src/include/add-on/add-on-workflow.rb:967 +#. table header +#: src/include/add-on/add-on-workflow.rb:967 msgid "Media" msgstr "미디어" -#. message report -#: src/include/add-on/add-on-workflow.rb:1120 +#. message report +#: src/include/add-on/add-on-workflow.rb:1120 msgid "Select a product to delete." msgstr "삭제할 제품을 선택하십시오." -#. TRANSLATORS: busy message -#: src/include/add-on/add-on-workflow.rb:1128 +#. TRANSLATORS: busy message +#: src/include/add-on/add-on-workflow.rb:1128 msgid "Removing selected add-on..." msgstr "선택한 추가 기능 제거 중..." -#. TRANSLATORS: dialog caption -#: src/include/add-on/add-on-workflow.rb:1255 +#. TRANSLATORS: dialog caption +#: src/include/add-on/add-on-workflow.rb:1255 msgid "Installed Add-on Products" msgstr "설치된 추가 기능 제품" -#. TRANSLATORS: table header item -#: src/include/add-on/add-on-workflow.rb:1262 +#. TRANSLATORS: table header item +#: src/include/add-on/add-on-workflow.rb:1262 msgid "Add-on Product" msgstr "추가 기능 제품" -#. TRANSLATORS: table header item -#: src/include/add-on/add-on-workflow.rb:1264 +#. TRANSLATORS: table header item +#: src/include/add-on/add-on-workflow.rb:1264 msgid "URL" msgstr "URL" -#. TRANSLATORS: push button -#: src/include/add-on/add-on-workflow.rb:1278 +#. TRANSLATORS: push button +#: src/include/add-on/add-on-workflow.rb:1278 msgid "Run &Software Manager..." msgstr "소프트웨어 관리자 실행(&S)..." -#. TRANSLATORS: dialog help adp/1 -#: src/include/add-on/add-on-workflow.rb:1282 +#. TRANSLATORS: dialog help adp/1 +#: src/include/add-on/add-on-workflow.rb:1282 msgid "<p>All add-on products installed on your system are displayed.</p>" msgstr "<p>시스템에 설치된 추가 기능 제품이 모두 표시됩니다.</p>" -#. TRANSLATORS: dialog help adp/2 -#: src/include/add-on/add-on-workflow.rb:1284 -msgid "" -"<p>Click <b>Add</b> to add a new add-on product, or <b>Delete</b> to remove " -"an add-on which is in use.</p>" -msgstr "" -"<p>새 추가 기능 제품을 추가하려면 <b>추가</b>를 클릭하고, 사용 중인 추가 기능" -"을 제거하려면 <b>삭제</b>를 클릭하십시오.</p>" +#. TRANSLATORS: dialog help adp/2 +#: src/include/add-on/add-on-workflow.rb:1284 +msgid "<p>Click <b>Add</b> to add a new add-on product, or <b>Delete</b> to remove an add-on which is in use.</p>" +msgstr "<p>새 추가 기능 제품을 추가하려면 <b>추가</b>를 클릭하고, 사용 중인 추가 기능을 제거하려면 <b>삭제</b>를 클릭하십시오.</p>" -#. no items -#: src/include/add-on/add-on-workflow.rb:1337 +#. no items +#: src/include/add-on/add-on-workflow.rb:1337 msgid "<b>Vendor:</b> %1<br>" msgstr "<b>제조업체:</b> %1<br>" -#: src/include/add-on/add-on-workflow.rb:1338 +#: src/include/add-on/add-on-workflow.rb:1338 msgid "Unknown vendor" msgstr "알 수 없는 제조업체" -#: src/include/add-on/add-on-workflow.rb:1341 +#: src/include/add-on/add-on-workflow.rb:1341 msgid "<b>Version:</b> %1<br>" msgstr "<b>버전:</b> %1<br>" -#: src/include/add-on/add-on-workflow.rb:1342 +#: src/include/add-on/add-on-workflow.rb:1342 msgid "Unknown version" msgstr "알 수 없는 버전" -#: src/include/add-on/add-on-workflow.rb:1345 +#: src/include/add-on/add-on-workflow.rb:1345 msgid "<b>Repository URL:</b> %1<br>" msgstr "<b>리포지토리 URL:</b> %1<br>" -#: src/include/add-on/add-on-workflow.rb:1351 +#: src/include/add-on/add-on-workflow.rb:1351 msgid "Unknown repository URL" msgstr "알 수 없는 리포지토리 URL" -#: src/include/add-on/add-on-workflow.rb:1358 +#: src/include/add-on/add-on-workflow.rb:1358 msgid "<b>Repository Alias:</b> %1<br>" msgstr "<b>리포지토리 별칭:</b> %1<br>" -#. Removes the currently selected Add-On -#. -#. @return [Boolean] whether something has changed its state -#: src/include/add-on/add-on-workflow.rb:1638 -#: src/include/add-on/add-on-workflow.rb:1691 +#. Removes the currently selected Add-On +#. +#. @return [Boolean] whether something has changed its state +#: src/include/add-on/add-on-workflow.rb:1638 +#: src/include/add-on/add-on-workflow.rb:1691 msgid "Unknown product" msgstr "알 수 없는 제품" -#: src/include/add-on/add-on-workflow.rb:1641 +#: src/include/add-on/add-on-workflow.rb:1641 msgid "Unknown URL" msgstr "알 수 없는 URL" -#: src/include/add-on/add-on-workflow.rb:1697 +#: src/include/add-on/add-on-workflow.rb:1697 msgid "" "Deleting the add-on product %1 may result in removing all the packages\n" "installed from this add-on.\n" @@ -460,18 +450,18 @@ "\n" "삭제하시겠습니까?" -#. TRANSLATORS: busy popup message -#: src/include/add-on/add-on-workflow.rb:1714 +#. TRANSLATORS: busy popup message +#: src/include/add-on/add-on-workflow.rb:1714 msgid "Removing product dependencies..." msgstr "제품 종속성 제거 중..." -#. TRANSLATORS: pop-up headline -#: src/include/add-on/misc.rb:72 +#. TRANSLATORS: pop-up headline +#: src/include/add-on/misc.rb:72 msgid "Warning: Not enough memory!" msgstr "경고: 메모리가 부족합니다!" -#. TRANSLATORS: pop-up question -#: src/include/add-on/misc.rb:74 +#. TRANSLATORS: pop-up question +#: src/include/add-on/misc.rb:74 msgid "" "Your system does not seem to have enough memory to use add-on products\n" "during installation. You can enable add-on products later when the\n" @@ -486,6 +476,6 @@ "\n" "추가 기능 제품 사용을 건너뛰시겠습니까?" -#: control/installation.glade.translations.glade:4 +#: control/installation.glade.translations.glade:4 msgid "Language Installation" msgstr "언어 설치" Modified: branches/SLE12-SP3/yast/ko/po/audit-laf.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/audit-laf.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/audit-laf.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,166 +14,166 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the audit-laf module -#. Initialization dialog caption -#. Initialization dialog caption -#: src/clients/audit-laf.rb:55 src/include/audit-laf/wizards.rb:180 -#: src/include/audit-laf/wizards.rb:228 +#. Command line help text for the audit-laf module +#. Initialization dialog caption +#. Initialization dialog caption +#: src/clients/audit-laf.rb:55 src/include/audit-laf/wizards.rb:180 +#: src/include/audit-laf/wizards.rb:228 msgid "Configuration of Linux Audit Framework (LAF)" msgstr "LAF(Linux Audit Framework) 구성" -#. translators: command line help text for show action -#: src/clients/audit-laf.rb:68 +#. translators: command line help text for show action +#: src/clients/audit-laf.rb:68 msgid "Show information about audit settings" msgstr "감사 설정에 대한 정보 표시" -#. translators: command line help text for set action -#: src/clients/audit-laf.rb:81 +#. translators: command line help text for set action +#: src/clients/audit-laf.rb:81 msgid "Set the specified option" msgstr "지정한 옵션 설정" -#. translators: command line help text for 'show logfile' -#: src/clients/audit-laf.rb:89 +#. translators: command line help text for 'show logfile' +#: src/clients/audit-laf.rb:89 msgid "Show log file settings" msgstr "로그 파일 설정 표시" -#. translators: command line help text for 'show diskspace' -#: src/clients/audit-laf.rb:95 +#. translators: command line help text for 'show diskspace' +#: src/clients/audit-laf.rb:95 msgid "Show disk space settings" msgstr "디스크 공간 설정 표시" -#. translators: command line help text for 'show dispatcher' -#: src/clients/audit-laf.rb:101 +#. translators: command line help text for 'show dispatcher' +#: src/clients/audit-laf.rb:101 msgid "Show dispatcher settings" msgstr "디스패쳐 설정 표시" -#. translators: command line help text for log_file option -#: src/clients/audit-laf.rb:107 +#. translators: command line help text for log_file option +#: src/clients/audit-laf.rb:107 msgid "Name of the log file (full path name)" msgstr "로그 파일의 이름(전체 경로 이름)" -#. translators: command line help text for log_format option -#: src/clients/audit-laf.rb:114 +#. translators: command line help text for log_format option +#: src/clients/audit-laf.rb:114 msgid "Log format" msgstr "로그 형식" -#. translators: command line help text for flush option -#: src/clients/audit-laf.rb:122 +#. translators: command line help text for flush option +#: src/clients/audit-laf.rb:122 msgid "How to write data to disk" msgstr "디스크에 데이터를 쓸 방법" -#. translators: command line help text for frequency option -#: src/clients/audit-laf.rb:130 +#. translators: command line help text for frequency option +#: src/clients/audit-laf.rb:130 msgid "How many records to write before a flush to disk is issued" msgstr "디스크 플러시 발급 전 쓸 레코드 수" -#. translators: command line help text for max_log_file option -#: src/clients/audit-laf.rb:137 +#. translators: command line help text for max_log_file option +#: src/clients/audit-laf.rb:137 msgid "Maximal size (in MByte) of the log file" msgstr "로그 파일의 최대 크기(MByte)" -#. translators: command line help text for max_log_file_action option -#: src/clients/audit-laf.rb:144 +#. translators: command line help text for max_log_file_action option +#: src/clients/audit-laf.rb:144 msgid "Action if max_log_file is reached" msgstr "max_log_file에 도달한 겨우 동작" -#. translators: command line help text for num_logs option -#: src/clients/audit-laf.rb:152 +#. translators: command line help text for num_logs option +#: src/clients/audit-laf.rb:152 msgid "Number of log files to keep" msgstr "저장해둘 로그파일의 수" -#. translators: command line help text for name_format option -#: src/clients/audit-laf.rb:159 +#. translators: command line help text for name_format option +#: src/clients/audit-laf.rb:159 msgid "Computer name format" msgstr "컴퓨터 이름 형식" -#. translators: command line help text for name_format option -#: src/clients/audit-laf.rb:167 +#. translators: command line help text for name_format option +#: src/clients/audit-laf.rb:167 msgid "Computer name (used if format is set to USER)" msgstr "컴퓨터 이름(형식을 USER로 설정한 경우)" -#. translators: command line help text for space_left option -#: src/clients/audit-laf.rb:174 +#. translators: command line help text for space_left option +#: src/clients/audit-laf.rb:174 msgid "Space left on log partition (in MByte) when system starts to run low" msgstr "시스템이 시작할 때 용량이 작은 로그 파티션의 최소 여유 용량(MByte)" -#. translators: command line help text for space_left_action option -#: src/clients/audit-laf.rb:181 +#. translators: command line help text for space_left_action option +#: src/clients/audit-laf.rb:181 msgid "Action if space_left is reached" msgstr "space_left에 도달한 경우 동작" -#. translators: command line help text for space_left_script option -#: src/clients/audit-laf.rb:196 +#. translators: command line help text for space_left_script option +#: src/clients/audit-laf.rb:196 msgid "Script to execute (full path name) if space_left is reached" msgstr "space_left에 도달한 경우 실행되는 스크립트(전체 경로 이름)" -#. translators: command line help text for admin_space_left -#: src/clients/audit-laf.rb:203 +#. translators: command line help text for admin_space_left +#: src/clients/audit-laf.rb:203 msgid "Space left on log partition (in MByte) when system is running low" msgstr "시스템이 부족할 때 로그 파티션에 남은 용량(MByte)" -#. command line help text for admin_space_left_action option -#: src/clients/audit-laf.rb:210 +#. command line help text for admin_space_left_action option +#: src/clients/audit-laf.rb:210 msgid "Action if admin_space_left is reached" msgstr "admin_space_left에 도달한 경우 동작" -#. translators: command line help text for admin_space_left_script option -#: src/clients/audit-laf.rb:225 +#. translators: command line help text for admin_space_left_script option +#: src/clients/audit-laf.rb:225 msgid "Script to execute (full path name) if admin_space_left is reached" msgstr "admin_space_left에 도달한 경우 실행되는 스크립트(전체 경로 이름)" -#. command line help text for action_mail_acct option -#: src/clients/audit-laf.rb:232 +#. command line help text for action_mail_acct option +#: src/clients/audit-laf.rb:232 msgid "Mail sent to this account (if space_left_action set to EMAIL)" msgstr "메일 보내기 계정(space_left_action을 EMAIL로 설정한 경우)" -#. command line help text for disk_full_action option -#: src/clients/audit-laf.rb:239 +#. command line help text for disk_full_action option +#: src/clients/audit-laf.rb:239 msgid "Action to perform if disk is full" msgstr "디스크가 가득 찼을 때 동작" -#. translators: command line help text for admin_space_left_script option -#: src/clients/audit-laf.rb:247 +#. translators: command line help text for admin_space_left_script option +#: src/clients/audit-laf.rb:247 msgid "Script to execute (full path name) if disk is full" msgstr "디스크가 가득 찼을 때 실행되는 스크립트(전체 경로)" -#. command line help text for disk_error_action option -#: src/clients/audit-laf.rb:254 +#. command line help text for disk_error_action option +#: src/clients/audit-laf.rb:254 msgid "Action to perform on disk error" msgstr "디스크 오류 발생 시 동작" -#. translators: command line help text for script on disk error option -#: src/clients/audit-laf.rb:262 +#. translators: command line help text for script on disk error option +#: src/clients/audit-laf.rb:262 msgid "Script to execute (full path name) on disk error" msgstr "디스크 오류 발생 시 실행되는 스크립트(전체 경로)" -#. command line help text for communication control option -#: src/clients/audit-laf.rb:269 +#. command line help text for communication control option +#: src/clients/audit-laf.rb:269 msgid "How to communicate between dispatcher and the audit daemon" msgstr "디스패쳐와 감사 데몬 간의 통신 방법" -#. command line help text for dispatcher option -#: src/clients/audit-laf.rb:277 +#. command line help text for dispatcher option +#: src/clients/audit-laf.rb:277 msgid "Dispatcher program (full path name)" msgstr "디스패쳐 프로그램(전체 경로 이름)" -#. Rich text title for AuditLaf in proposals -#: src/clients/audit-laf_proposal.rb:82 +#. Rich text title for AuditLaf in proposals +#: src/clients/audit-laf_proposal.rb:82 msgid "AuditLaf" msgstr "AuditLaf" -#. Menu title for AuditLaf in proposals -#: src/clients/audit-laf_proposal.rb:86 +#. Menu title for AuditLaf in proposals +#: src/clients/audit-laf_proposal.rb:86 msgid "&AuditLaf" msgstr "AuditLaf(&A)" -#. Handle actions of log file dialog (button 'Select file') -#: src/include/audit-laf/complex.rb:126 +#. Handle actions of log file dialog (button 'Select file') +#: src/include/audit-laf/complex.rb:126 msgid "Select the log file" msgstr "로그 파일 선택" -#. Store all values in SETTINGS -#: src/include/audit-laf/complex.rb:178 +#. Store all values in SETTINGS +#: src/include/audit-laf/complex.rb:178 msgid "" "The 'User Defined Name' is NOT set although\n" "the 'Computer Name Format' is set to 'USER'.\n" @@ -183,35 +183,35 @@ "'사용자 정의 이름'은 설정되지 않습니다.\n" "형식을 'NONE'(기본값)으로 설정합니다." -#. Handle actions of dispatcher dialog (button 'Select file') -#: src/include/audit-laf/complex.rb:223 +#. Handle actions of dispatcher dialog (button 'Select file') +#: src/include/audit-laf/complex.rb:223 msgid "Select the dispatcher program" msgstr "디스패처 프로그램 선택" -#. Second part of an error message: the value won't be changed because of previous error -#: src/include/audit-laf/complex.rb:338 +#. Second part of an error message: the value won't be changed because of previous error +#: src/include/audit-laf/complex.rb:338 msgid "Value of '%1' remains unchanged." msgstr "'%1'의 값은 변경되지 않습니다." -#: src/include/audit-laf/complex.rb:342 +#: src/include/audit-laf/complex.rb:342 msgid "%1 doesn't exist.\n" msgstr "%1이(가) 없습니다.\n" -#: src/include/audit-laf/complex.rb:348 +#: src/include/audit-laf/complex.rb:348 msgid "%1 is not a regular file.\n" msgstr "%1은(는) 정규 파일이 아닙니다.\n" -#: src/include/audit-laf/complex.rb:355 +#: src/include/audit-laf/complex.rb:355 msgid "%1 not owned by root.\n" msgstr "%1은(는) 루트가 소유하지 않았습니다.\n" -#. check permissions -#: src/include/audit-laf/complex.rb:371 +#. check permissions +#: src/include/audit-laf/complex.rb:371 msgid "File permissions of %1 NOT set to -rwxr-x---.\n" msgstr "%1의 파일 권한이 -rwxr-x---로 설정되지 않았습니다.\n" -#. Warning - the audit configuration is locked, reset impossible -#: src/include/audit-laf/complex.rb:461 +#. Warning - the audit configuration is locked, reset impossible +#: src/include/audit-laf/complex.rb:461 msgid "" "The rules are already locked, a reset is impossible.\n" "\n" @@ -223,18 +223,18 @@ "잠금을 해제하려면 그에 따라 활성 플래그를 설정하고\n" "구성을 완료하십시오. 그런 다음 재부팅을 해야 합니다." -#. Report success -#: src/include/audit-laf/complex.rb:488 +#. Report success +#: src/include/audit-laf/complex.rb:488 msgid "Rules successfully restored" msgstr "규칙이 복원되었습니다." -#. Report error - error during reset -#: src/include/audit-laf/complex.rb:492 +#. Report error - error during reset +#: src/include/audit-laf/complex.rb:492 msgid "Cannot reset rules. Check /etc/audit/audit.rules." msgstr "규칙을 재설정할 수 없습니다. /etc/audit/audit.rules를 확인하십시오." -#. Handle actions of rules dialog -#: src/include/audit-laf/complex.rb:560 +#. Handle actions of rules dialog +#: src/include/audit-laf/complex.rb:560 msgid "" "The rules are already locked.\n" "\n" @@ -246,7 +246,7 @@ "새 규칙을 보내면 오류가 발생하므로\n" "테스트할 수 없습니다.\n" -#: src/include/audit-laf/complex.rb:573 +#: src/include/audit-laf/complex.rb:573 msgid "" "Lock is set in audit.rules (-e 2).\n" "\n" @@ -258,25 +258,25 @@ "다음 부팅까지 규칙이 잠기므로 \n" "계속해도 의미가 없습니다.\n" -#: src/include/audit-laf/complex.rb:606 +#: src/include/audit-laf/complex.rb:606 msgid "Success" msgstr "성공" -#: src/include/audit-laf/complex.rb:609 +#: src/include/audit-laf/complex.rb:609 msgid "Cannot create tmp file for rules." msgstr "규칙에 대한 tmp 파일을 생성할 수 없습니다." -#: src/include/audit-laf/complex.rb:616 +#: src/include/audit-laf/complex.rb:616 msgid "Select an example" msgstr "예 선택" -#. Called if 'Abort' button is pressed in main dialog. -#. If the rules are changed by a syntax check the changes will be reseted. -#: src/include/audit-laf/complex.rb:666 +#. Called if 'Abort' button is pressed in main dialog. +#. If the rules are changed by a syntax check the changes will be reseted. +#: src/include/audit-laf/complex.rb:666 msgid "Lock set" msgstr "설정 잠금" -#: src/include/audit-laf/complex.rb:667 +#: src/include/audit-laf/complex.rb:667 msgid "" "The audit configuration is locked (option -e 2).\n" "This means the rules are locked until next boot!\n" @@ -290,203 +290,202 @@ "확인하십시오. 아닐 경우 감사를 활성화하거나 비활성화하십시오.\n" "규칙을 확인하거나 변경하려면 규칙 편집기로 돌아가십시오.\n" -#. Frame label -#: src/include/audit-laf/dialogs.rb:69 +#. Frame label +#: src/include/audit-laf/dialogs.rb:69 msgid "General Settings" msgstr "일반 설정" -#. InputField label -#. Header of tab in tab widget -#: src/include/audit-laf/dialogs.rb:74 src/include/audit-laf/wizards.rb:117 +#. InputField label +#. Header of tab in tab widget +#: src/include/audit-laf/dialogs.rb:74 src/include/audit-laf/wizards.rb:117 msgid "&Log File" msgstr "로그 파일(&L)" -#. PushButton label -#. PushButton label -#: src/include/audit-laf/dialogs.rb:79 src/include/audit-laf/dialogs.rb:222 +#. PushButton label +#. PushButton label +#: src/include/audit-laf/dialogs.rb:79 src/include/audit-laf/dialogs.rb:222 msgid "Select Fi&le" msgstr "파일 선택(&L)" -#. ComboBox label - select format of logging -#: src/include/audit-laf/dialogs.rb:90 +#. ComboBox label - select format of logging +#: src/include/audit-laf/dialogs.rb:90 msgid "&Format" msgstr "형식(&F)" -#. ComboBox label - select how to flush data on disk -#: src/include/audit-laf/dialogs.rb:103 +#. ComboBox label - select how to flush data on disk +#: src/include/audit-laf/dialogs.rb:103 msgid "Fl&ush" msgstr "플러시(&U)" -#. InputField label - enter how many records to write before flush data to disk -#: src/include/audit-laf/dialogs.rb:119 +#. InputField label - enter how many records to write before flush data to disk +#: src/include/audit-laf/dialogs.rb:119 msgid "Fre&quency (Number of Records)" msgstr "주파수(레코드 수)(&Q)" -#. Frame label - data regarding size of log file and action to perform -#: src/include/audit-laf/dialogs.rb:132 +#. Frame label - data regarding size of log file and action to perform +#: src/include/audit-laf/dialogs.rb:132 msgid "Size and Action" msgstr "크기와 동작" -#. InputField label -#: src/include/audit-laf/dialogs.rb:137 +#. InputField label +#: src/include/audit-laf/dialogs.rb:137 msgid "Ma&x File Size (MB)" msgstr "최대 파일 크기(MB)(&X)" -#. ComboBox label -#: src/include/audit-laf/dialogs.rb:145 +#. ComboBox label +#: src/include/audit-laf/dialogs.rb:145 msgid "M&aximum File Size Action" msgstr "최대 파일 크기 동작(&A)" -#. InputField label -#: src/include/audit-laf/dialogs.rb:162 +#. InputField label +#: src/include/audit-laf/dialogs.rb:162 msgid "&Number of Log Files" msgstr "로그 파일 수(&N)" -#. Frame label - data regarding how to write computer names to the log file -#: src/include/audit-laf/dialogs.rb:173 +#. Frame label - data regarding how to write computer names to the log file +#: src/include/audit-laf/dialogs.rb:173 msgid "Computer Names" msgstr "컴퓨터 이름" -#. ComboBox label -#: src/include/audit-laf/dialogs.rb:181 +#. ComboBox label +#: src/include/audit-laf/dialogs.rb:181 msgid "&Computer Name Format" msgstr "컴퓨터 이름 형식(&C)" -#. InputField label -#: src/include/audit-laf/dialogs.rb:192 +#. InputField label +#: src/include/audit-laf/dialogs.rb:192 msgid "User Defined Name" msgstr "사용자 정의 이름" -#. Frame label - settings of the dispatcher program -#: src/include/audit-laf/dialogs.rb:208 +#. Frame label - settings of the dispatcher program +#: src/include/audit-laf/dialogs.rb:208 msgid "Dispatcher Settings" msgstr "디스패처 설정" -#. InputField label -#: src/include/audit-laf/dialogs.rb:216 +#. InputField label +#: src/include/audit-laf/dialogs.rb:216 msgid "Dispatcher Program" msgstr "디스패처 프로그램" -#. ComboBox label - communication between the audit daemon and the dispatcher program -#: src/include/audit-laf/dialogs.rb:230 +#. ComboBox label - communication between the audit daemon and the dispatcher program +#: src/include/audit-laf/dialogs.rb:230 msgid "C&ommunication" msgstr "통신(&O)" -#. Frame label - keep it short! -#: src/include/audit-laf/dialogs.rb:252 +#. Frame label - keep it short! +#: src/include/audit-laf/dialogs.rb:252 msgid "Value and Action for Space Is Starting to Run Low" msgstr "공간에 대한 값 및 작업이 부족해지기 시작합니다." -#. InputField label - space on disk is starting to run low if the entered value is reached -#: src/include/audit-laf/dialogs.rb:257 +#. InputField label - space on disk is starting to run low if the entered value is reached +#: src/include/audit-laf/dialogs.rb:257 msgid "&Space Left on Disk (MB)" msgstr "디스크에 남은 공간(MB)(&S)" -#. ComboBox label - select an action which is performed if space on disk is low -#: src/include/audit-laf/dialogs.rb:266 +#. ComboBox label - select an action which is performed if space on disk is low +#: src/include/audit-laf/dialogs.rb:266 msgid "&Action" msgstr "작동(&A)" -#. InputField label - enter the path to a script (which will be executed) -#. InputField label - enter the path to a script (which will be executed) -#. InputField label - enter the path to a script (which will be executed) -#. InputField label - enter the path to a script (which will be executed) -#: src/include/audit-laf/dialogs.rb:274 src/include/audit-laf/dialogs.rb:305 -#: src/include/audit-laf/dialogs.rb:332 src/include/audit-laf/dialogs.rb:350 +#. InputField label - enter the path to a script (which will be executed) +#. InputField label - enter the path to a script (which will be executed) +#. InputField label - enter the path to a script (which will be executed) +#. InputField label - enter the path to a script (which will be executed) +#: src/include/audit-laf/dialogs.rb:274 src/include/audit-laf/dialogs.rb:305 +#: src/include/audit-laf/dialogs.rb:332 src/include/audit-laf/dialogs.rb:350 msgid "Path to Script" msgstr "스크립트 경로" -#. Frame label - keep it short! -#: src/include/audit-laf/dialogs.rb:281 +#. Frame label - keep it short! +#: src/include/audit-laf/dialogs.rb:281 msgid "Value and Action for Space Is Running Low" msgstr "공간에 대한 값 및 작업이 부족합니다." -#. InputField label - space on disk is running low if the entered value is reached -#: src/include/audit-laf/dialogs.rb:286 +#. InputField label - space on disk is running low if the entered value is reached +#: src/include/audit-laf/dialogs.rb:286 msgid "&Admin Space Left (MB) " msgstr "관리자의 사용 가능한 공간(MB)(&A)" -#. ComboBox label - select an action which is performed if space on disk is running low -#: src/include/audit-laf/dialogs.rb:295 +#. ComboBox label - select an action which is performed if space on disk is running low +#: src/include/audit-laf/dialogs.rb:295 msgid "Ac&tion" msgstr "동작(&T)" -#: src/include/audit-laf/dialogs.rb:311 +#: src/include/audit-laf/dialogs.rb:311 msgid "Action Mail Account" msgstr "동작 메일 계정" -#. Frame label - keep it short! -#: src/include/audit-laf/dialogs.rb:315 +#. Frame label - keep it short! +#: src/include/audit-laf/dialogs.rb:315 msgid "Action on Error or Disk Full" msgstr "오류 동작 또는 디스크가 가득 참" -#. ComboBox label - select an action which is performed if disk is full -#: src/include/audit-laf/dialogs.rb:324 +#. ComboBox label - select an action which is performed if disk is full +#: src/include/audit-laf/dialogs.rb:324 msgid "Disk &Full Action" msgstr "디스크가 가득 참 동작(&F)" -#. ComboBox label - select an action which is performed on error -#: src/include/audit-laf/dialogs.rb:342 +#. ComboBox label - select an action which is performed on error +#: src/include/audit-laf/dialogs.rb:342 msgid "Disk &Error Action" msgstr "디스크 오류 동작(&E)" -#. label of a combo box with the possibilitiy to enable/disable auditing or lock the rules -#: src/include/audit-laf/dialogs.rb:374 +#. label of a combo box with the possibilitiy to enable/disable auditing or lock the rules +#: src/include/audit-laf/dialogs.rb:374 msgid "&Set Enabled Flag" msgstr "활성 플래그 설정(&S)" -#. combo box item -#: src/include/audit-laf/dialogs.rb:377 src/modules/AuditLaf.rb:233 +#. combo box item +#: src/include/audit-laf/dialogs.rb:377 src/modules/AuditLaf.rb:233 msgid "Auditing enabled" msgstr "감사 활성" -#. combo box item -#: src/include/audit-laf/dialogs.rb:379 src/modules/AuditLaf.rb:235 +#. combo box item +#: src/include/audit-laf/dialogs.rb:379 src/modules/AuditLaf.rb:235 msgid "Auditing disabled" msgstr "감사 비활성" -#. combo box item -#: src/include/audit-laf/dialogs.rb:381 +#. combo box item +#: src/include/audit-laf/dialogs.rb:381 msgid "Rules are locked (until next boot)" msgstr "규칙이 잠김(다음 부팅 시까지)" -#. Label - describes what can be done in the editor -#: src/include/audit-laf/dialogs.rb:393 +#. Label - describes what can be done in the editor +#: src/include/audit-laf/dialogs.rb:393 msgid "Edit the rules for the audit subsystem here:" msgstr "여기에서 감사 하위 시스템에 대한 규칙 편집:" -#. label of a push button (please keep it short) -#: src/include/audit-laf/dialogs.rb:401 +#. label of a push button (please keep it short) +#: src/include/audit-laf/dialogs.rb:401 msgid "&Check Syntax" msgstr "구문 확인(&C)" -#. label of push button (please keep it short) -#: src/include/audit-laf/dialogs.rb:404 +#. label of push button (please keep it short) +#: src/include/audit-laf/dialogs.rb:404 msgid "&Restore 'audit.rules'" msgstr "'audit.rules' 복원(&R)" -#. label of push button (please keep it short) -#: src/include/audit-laf/dialogs.rb:407 +#. label of push button (please keep it short) +#: src/include/audit-laf/dialogs.rb:407 msgid "R&estore and Reset" msgstr "복원 후 재설정(&E)" -#. label of a push button -#: src/include/audit-laf/dialogs.rb:410 +#. label of a push button +#: src/include/audit-laf/dialogs.rb:410 msgid "&Load " msgstr "로드(&L)" -#. Read dialog help 1/2 -#: src/include/audit-laf/helps.rb:35 +#. Read dialog help 1/2 +#: src/include/audit-laf/helps.rb:35 msgid "" -"<p><b><big>Initializing Configuration of Linux Audit Framework</big><br>\n" +"<p><b><big>Initializing Configuration of Linux Audit Framework</big></b><br>\n" "</p>\n" msgstr "" "<p><b><big>Linux Audit Framework 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/audit-laf/helps.rb:39 +#. Read dialog help 2/2 +#: src/include/audit-laf/helps.rb:39 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -494,8 +493,8 @@ "<p><b><big>초기화 중단 중:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/audit-laf/helps.rb:43 +#. Write dialog help 1/2 +#: src/include/audit-laf/helps.rb:43 msgid "" "<p><b><big>Saving auditd Configuration and Rules</big></b><br>\n" "</p>\n" @@ -503,8 +502,8 @@ "<p><b><big>auditd 구성 및 규칙 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/audit-laf/helps.rb:47 +#. Write dialog help 2/2 +#: src/include/audit-laf/helps.rb:47 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -516,39 +515,29 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. logfile_settings dialog help 1/8 -#: src/include/audit-laf/helps.rb:54 +#. logfile_settings dialog help 1/8 +#: src/include/audit-laf/helps.rb:54 msgid "" "<p><b><big>Auditd Log File Configuration</big></b><br>\n" -"The audit daemon is the component of the Linux Auditing System which is " -"responsible for writing all relevant audit events to the log file <i>/var/" -"log/audit/audit.log</i> (default).\n" -"Events may come from the <i>apparmor</i> kernel module, from applications " -"which use <i>libaudit</i> (e.g. PAM) or incidents caused by rules (e.g. file " -"watches).</p>" +"The audit daemon is the component of the Linux Auditing System which is responsible for writing all relevant audit events to the log file <i>/var/log/audit/audit.log</i> (default).\n" +"Events may come from the <i>apparmor</i> kernel module, from applications which use <i>libaudit</i> (e.g. PAM) or incidents caused by rules (e.g. file watches).</p>" msgstr "" "<p><b><big>Auditd 로그 파일 구성</big></b><br>\n" -"감사 데몬은 로그 파일 <i>/var/log/audit/audit.log</i>(기본값)에 모든 관련 감" -"사 이벤트를 기록하는 Linux Auditing System의 구성 요소입니다.\n" +"감사 데몬은 로그 파일 <i>/var/log/audit/audit.log</i>(기본값)에 모든 관련 감사 이벤트를 기록하는 Linux Auditing System의 구성 요소입니다.\n" "이벤트는 <i>apparmor</i> 커널 모듈, \n" -"<i>libaudit</i>(예: PAM)를 사용하는 응용 프로그램 또는 규칙에서 발생한 사건" -"(예: 파일 감시)으로부터 발생할 수 있습니다.</p>" +"<i>libaudit</i>(예: PAM)를 사용하는 응용 프로그램 또는 규칙에서 발생한 사건(예: 파일 감시)으로부터 발생할 수 있습니다.</p>" -#. logfile_settings dialog help 2/8 -#: src/include/audit-laf/helps.rb:60 +#. logfile_settings dialog help 2/8 +#: src/include/audit-laf/helps.rb:60 msgid "" -"<p>The <b>Rules for auditctl</b> dialog offers more information about rules " -"and the possibility to add rules.\n" -"Detailed information about the log file settings can be obtained from the " -"manual page ('man auditd.conf').</p>" +"<p>The <b>Rules for auditctl</b> dialog offers more information about rules and the possibility to add rules.\n" +"Detailed information about the log file settings can be obtained from the manual page ('man auditd.conf').</p>" msgstr "" -"<p><b>auditctl의 규칙</b> 대화 상자에는 규칙에 대한 기타 정보와 규칙 추가 가" -"능성에 대한 자세한 정보가 나와 있습니다.\n" -"로그 파일 설정에 대한 자세한 정보는 맨페이지('man auditd.conf')에서 확인할 " -"수 있습니다.</p>" +"<p><b>auditctl의 규칙</b> 대화 상자에는 규칙에 대한 기타 정보와 규칙 추가 가능성에 대한 자세한 정보가 나와 있습니다.\n" +"로그 파일 설정에 대한 자세한 정보는 맨페이지('man auditd.conf')에서 확인할 수 있습니다.</p>" -#. logfile_settings dialog help 3/8 -#: src/include/audit-laf/helps.rb:64 +#. logfile_settings dialog help 3/8 +#: src/include/audit-laf/helps.rb:64 msgid "" "<p><b>Log File</b>: Enter the full path name to the log file\n" "(or use <b>Select File</b>.)</p>" @@ -556,146 +545,113 @@ "<p><b>로그 파일</b>: 로그 파일에 전체 경로 이름을 입력합니다\n" "(또는 <b>파일 선택</b> 사용).</p>" -#. logfile_settings dialog help 4/8 -#: src/include/audit-laf/helps.rb:68 +#. logfile_settings dialog help 4/8 +#: src/include/audit-laf/helps.rb:68 msgid "" -"<p><b>Format</b>: set <i>RAW</i> to log all data (store in a format exactly " -"as the kernel\n" -"sends it) or <i>NOLOG</i> to discard all audit information instead of " -"writing it on disk (does not affect\n" +"<p><b>Format</b>: set <i>RAW</i> to log all data (store in a format exactly as the kernel\n" +"sends it) or <i>NOLOG</i> to discard all audit information instead of writing it on disk (does not affect\n" "data sent to the dispatcher).</p> " msgstr "" -"<p><b>형식</b>: <i>RAW</i>를 설정하여 모든 데이터를 기록하거나(커널이 데이터" -"를 전송하는\n" -"것과 같은 형식으로 저장)<i>NOLOG</i>를 설정하여 디스크에 기록하는 대신 모든 " -"감사 정보를\n" +"<p><b>형식</b>: <i>RAW</i>를 설정하여 모든 데이터를 기록하거나(커널이 데이터를 전송하는\n" +"것과 같은 형식으로 저장)<i>NOLOG</i>를 설정하여 디스크에 기록하는 대신 모든 감사 정보를\n" "무시합니다(디스패쳐에 전송한 데이터에는 적용되지 않음).</p> " -#. logfile_settings dialog help 5/8 -#: src/include/audit-laf/helps.rb:74 +#. logfile_settings dialog help 5/8 +#: src/include/audit-laf/helps.rb:74 msgid "" -"<p><b>Flush</b>: describes how to write the data to disk. If set to " -"<i>INCREMENTAL</i> the\n" -"<b>Frequency</b> parameter tells how many records to write before issuing an " -"explicit flush to disk.\n" -"<i>NONE</i> means: no special effort is made to flush data, <i>DATA</i>: " -"keep data portion synced,\n" +"<p><b>Flush</b>: describes how to write the data to disk. If set to <i>INCREMENTAL</i> the\n" +"<b>Frequency</b> parameter tells how many records to write before issuing an explicit flush to disk.\n" +"<i>NONE</i> means: no special effort is made to flush data, <i>DATA</i>: keep data portion synced,\n" "<i>SYNC</i>: keep data and meta-data fully synced.</p>" msgstr "" -"<p><b>플러시</b>: 디스크에 데이터를 쓰는 방법을 설명합니다. <i>INCREMENTAL로 설정된 경우\n" -"<b>빈도</b> 파라미터에 따라 디스크에 명시적 플러시를 실행하기 전에 쓸 레코드 " -"수가 지정됩니다.\n" -"<i>NONE</i>: 데이터를 플러시하려는 특별한 작업이 수행되지 않습니다. <i>DATA: 데이터 부분을 동기화된 상태로 유지합니다,\n" +"<p><b>플러시</b>: 디스크에 데이터를 쓰는 방법을 설명합니다. <i>INCREMENTAL</i>로 설정된 경우\n" +"<b>빈도</b> 파라미터에 따라 디스크에 명시적 플러시를 실행하기 전에 쓸 레코드 수가 지정됩니다.\n" +"<i>NONE</i>: 데이터를 플러시하려는 특별한 작업이 수행되지 않습니다. <i>DATA</i>: 데이터 부분을 동기화된 상태로 유지합니다,\n" "<i>SYNC</i>: 데이터 및 메타데이터를 완전히 동기화된 상태로 유지합니다.</p>" -#. logfile_settings dialog help 6/8 -#: src/include/audit-laf/helps.rb:81 +#. logfile_settings dialog help 6/8 +#: src/include/audit-laf/helps.rb:81 msgid "" -"<p>Configure the maximum log file size (in megabytes) and the action to take " -"when this\n" +"<p>Configure the maximum log file size (in megabytes) and the action to take when this\n" "value is reached via <b>Size and Action</b>.</p>\n" msgstr "" -"<p><b>크기 및 작업</b>을 통해 최대 로그 파일 크기(MB) 및 이 값에 도달했을 때 " -"수행할 작업을\n" +"<p><b>크기 및 작업</b>을 통해 최대 로그 파일 크기(MB) 및 이 값에 도달했을 때 수행할 작업을\n" "구성합니다.</p>\n" -#. logfile_settings dialog help 7/8 -#: src/include/audit-laf/helps.rb:85 +#. logfile_settings dialog help 7/8 +#: src/include/audit-laf/helps.rb:85 msgid "" -"<p>If the action is set to <i>ROTATE</i> the <b>Number of Log Files</b> " -"specifies the number\n" -"of files to keep. Set to <i>SYSLOG</i>, the audit daemon will write a " -"warning\n" -"to /var/log/messages. With <i>SUSPEND</i> the daemon stops writing records " -"to\n" +"<p>If the action is set to <i>ROTATE</i> the <b>Number of Log Files</b> specifies the number\n" +"of files to keep. Set to <i>SYSLOG</i>, the audit daemon will write a warning\n" +"to /var/log/messages. With <i>SUSPEND</i> the daemon stops writing records to\n" "disk. <i>IGNORE</i> means do nothing, <i>KEEP_LOGS</i> is similar\n" "to ROTATE, but log files are not overwritten.</p>\n" msgstr "" -"<p>작업이 <i>ROTATE</i>로 설정된 경우 <b>로그 파일 수</b>는 유지할 파일 수" -"를\n" +"<p>작업이 <i>ROTATE</i>로 설정된 경우 <b>로그 파일 수</b>는 유지할 파일 수를\n" "지정합니다. <i>SYSLOG</i>로 설정된 경우 감사 데몬이\n" -"/var/log/messages에 경고를 씁니다. <i>SUSPEND</i>를 사용하면 데몬이 디스크에 " -"레코드 쓰기를\n" -"중지합니다. <i>IGNORE</i>는 아무 작업도 수행하지 않음을 의미합니다. " -"<i>KEEP_LOGS</i>는\n" +"/var/log/messages에 경고를 씁니다. <i>SUSPEND</i>를 사용하면 데몬이 디스크에 레코드 쓰기를\n" +"중지합니다. <i>IGNORE</i>는 아무 작업도 수행하지 않음을 의미합니다. <i>KEEP_LOGS</i>는\n" "ROTATE와 유사하지만 로그 파일을 덮어쓰지 않습니다.</p>\n" -#. logfile_settings dialog help 8/8 -#: src/include/audit-laf/helps.rb:93 +#. logfile_settings dialog help 8/8 +#: src/include/audit-laf/helps.rb:93 msgid "" -"<p><b>Computer Name Format</b> describes how to write the computer name to " -"the\n" +"<p><b>Computer Name Format</b> describes how to write the computer name to the\n" "log file. If <i>USER</i> is set, the <b>User Defined Name</b> is\n" -"used. <i>NONE</i> means no computer name is inserted. <i>HOSTNAME</i> uses " -"the\n" -"name returned by the 'gethostname' syscall. <i>FQD</i> uses the fully " -"qualified\n" +"used. <i>NONE</i> means no computer name is inserted. <i>HOSTNAME</i> uses the\n" +"name returned by the 'gethostname' syscall. <i>FQD</i> uses the fully qualified\n" "domain name.</p>\n" msgstr "" "<p><b>컴퓨터 이름 형식</b>은 로그 파일에 컴퓨터 이름을 쓰는 방법을\n" "설명합니다. <i>USER</i>가 설정된 경우 <b>사용자 정의 이름</b>이\n" -"사용됩니다. <i>NONE</i>은 컴퓨터 이름이 삽입되지 않음을 의미합니다. " -"<i>HOSTNAME</i>은\n" -"'gethostname' syscall에서 반환된 이름을 사용합니다. <i>FQD</i>는 정규화된 도" -"메인 이름을\n" +"사용됩니다. <i>NONE</i>은 컴퓨터 이름이 삽입되지 않음을 의미합니다. <i>HOSTNAME</i>은\n" +"'gethostname' syscall에서 반환된 이름을 사용합니다. <i>FQD</i>는 정규화된 도메인 이름을\n" "사용합니다.</p>\n" -#. dispatcher dialog help 1/5 -#: src/include/audit-laf/helps.rb:101 +#. dispatcher dialog help 1/5 +#: src/include/audit-laf/helps.rb:101 msgid "" "<p><b><big>Auditd Dispatcher Configuration</big></b><br>\n" -"Detailed information about the dispatcher settings can be obtained from the " -"manual page\n" +"Detailed information about the dispatcher settings can be obtained from the manual page\n" "('man auditd.conf').</p>" msgstr "" "<p><b><big>Auditd 디스패쳐 구성</big></b><br>\n" -"디스패쳐 설정에 대한 자세한 내용은 맨페이지('man auditd.conf')에서 확인할 " -"수\n" +"디스패쳐 설정에 대한 자세한 내용은 맨페이지('man auditd.conf')에서 확인할 수\n" "있습니다.</p>" -#. dispatcher dialog help 2/5 -#: src/include/audit-laf/helps.rb:107 +#. dispatcher dialog help 2/5 +#: src/include/audit-laf/helps.rb:107 msgid "" -"<p><b>Dispatcher</b>: The dispatcher program is started by the audit daemon " -"and\n" +"<p><b>Dispatcher</b>: The dispatcher program is started by the audit daemon and\n" "gets all audit events on stdin.</p>" msgstr "" "<p><b>디스패처</b>: 디스패처 프로그램은 감사 데몬에서 시작되고\n" "stdin에서 모든 감사 이벤트를 가져옵니다.</p>" -#. dispatcher dialog help 3/5 -#: src/include/audit-laf/helps.rb:111 +#. dispatcher dialog help 3/5 +#: src/include/audit-laf/helps.rb:111 msgid "" -"<p><b>Communication</b>: Controls the communication between the daemon and " -"the dispatcher\n" -"program. A <i>lossy</i> communication means that events going to the " -"dispatcher are discarded\n" -"when the queue (a 128kB buffer) is full. Choose <i>lossless</i> if you want " -"a blocking/lossless\n" +"<p><b>Communication</b>: Controls the communication between the daemon and the dispatcher\n" +"program. A <i>lossy</i> communication means that events going to the dispatcher are discarded\n" +"when the queue (a 128kB buffer) is full. Choose <i>lossless</i> if you want a blocking/lossless\n" "communication.</p>" msgstr "" -"<p><b>통신</b>: 데몬과 디스패쳐 프로그램 간의 통신을 제어합니다. <i>손실 허용" -"</i>\n" -"통신은 대기열(128KB 버퍼)이 가득 찼을 때 디스패쳐로 가는 이벤트가 폐기되는 것" -"을 의미합니다.\n" +"<p><b>통신</b>: 데몬과 디스패쳐 프로그램 간의 통신을 제어합니다. <i>손실 허용</i>\n" +"통신은 대기열(128KB 버퍼)이 가득 찼을 때 디스패쳐로 가는 이벤트가 폐기되는 것을 의미합니다.\n" "차단/무손실 통신을 실행하려면 <i>무손실</i>을 선택하십시오.\n" "</p>" -#. dispatcher dialog help 4/5 -#: src/include/audit-laf/helps.rb:118 +#. dispatcher dialog help 4/5 +#: src/include/audit-laf/helps.rb:118 msgid "" "<p>The dispatcher 'audispd' is an audit event multiplexor.\n" -"For more information see the manual pages ('man audispd' and 'man audispd." -"conf').</p>" +"For more information see the manual pages ('man audispd' and 'man audispd.conf').</p>" msgstr "" "<p>디스패쳐 'audispd'는 감사 이벤트 멀티플렉서입니다.\n" -"자세한 내용은 맨페이지('man audispd' 및 'man audispd.conf')를 참조하십시오." +"자세한 내용은 맨페이지('man audispd' 및 'man audispd.conf')를 참조하십시오.</p>" -#. dispatcher dialog help 5/5 -#: src/include/audit-laf/helps.rb:122 +#. dispatcher dialog help 5/5 +#: src/include/audit-laf/helps.rb:122 msgid "" "<p><b>Note:</b> The dispatcher program must be owned by 'root', have '0750'\n" " file permissions, and the full path name has to be entered.</p>\n" @@ -703,8 +659,8 @@ "<p><b>참고:</b> 디스패처 프로그램은 'root'에 의해 소유되고 '0750'\n" " 파일 권한이 있어야 하며, 전체 경로 이름을 입력해야 합니다.</p>\n" -#. disk space dialog help 1/6 -#: src/include/audit-laf/helps.rb:126 +#. disk space dialog help 1/6 +#: src/include/audit-laf/helps.rb:126 msgid "" "<p><b><big>Auditd Disk Space Configuration</big></b><br>\n" "The settings made here refer to disk space on log partition.\n" @@ -714,136 +670,106 @@ "여기서 수행된 설정은 로그 파티션의 디스크 공간을 가리킵니다.\n" "자세한 내용은 매뉴얼 페이지('man auditd.conf')를 참조하십시오.</p>\n" -#. disk space dialog help 2/6 -#: src/include/audit-laf/helps.rb:132 +#. disk space dialog help 2/6 +#: src/include/audit-laf/helps.rb:132 msgid "" -"<p><b>Space Left</b> (in megabytes) tells the audit daemon when to perform " -"an <b>Action</b> because\n" +"<p><b>Space Left</b> (in megabytes) tells the audit daemon when to perform an <b>Action</b> because\n" "the system is starting to run low on space.</p>" msgstr "" -"<p><b>남아 있는 공간</b>(MB 단위)은 시스템의 공간이 부족해지기 시작하기 때문" -"에\n" +"<p><b>남아 있는 공간</b>(MB 단위)은 시스템의 공간이 부족해지기 시작하기 때문에\n" "감사 데몬에게 <b>동작</b>을 수행할 시기를 알려줍니다.</p>" -#. disk space dialog help 3/6 -#: src/include/audit-laf/helps.rb:136 +#. disk space dialog help 3/6 +#: src/include/audit-laf/helps.rb:136 msgid "" -"<p>The value for <b>Admin Space Left</b> should be lower than above. The " -"system <b>is running\n" -"low</b> on disk space if the value is reached and the specified <b>Action will be performed.</p>" +"<p>The value for <b>Admin Space Left</b> should be lower than above. The system <b>is running\n" +"low</b> on disk space if the value is reached and the specified <b>Action</b> will be performed.</p>" msgstr "" -"<p><b>남아 있는 관리자 공간</b> 값은 위의 값보다 작아야 합니다. 이 값에 도달" -"하면 시스템의\n" +"<p><b>남아 있는 관리자 공간</b> 값은 위의 값보다 작아야 합니다. 이 값에 도달하면 시스템의\n" "<b>디스크 공간이 부족</b>해지고 지정된 <b>동작</b>이 수행됩니다.</p>" -#. disk space dialog hep 4/6 -#: src/include/audit-laf/helps.rb:140 +#. disk space dialog hep 4/6 +#: src/include/audit-laf/helps.rb:140 msgid "" "<p>If an action is set to <i>EMAIL</i>, a warning mail will be sent to the\n" -"account specified in <b>Action Mail Account</b>.<br> <i>SYSLOG</i> means " -"the\n" -"disk space warning will be written to /var/log/messages. <i>IGNORE</i> " -"means\n" +"account specified in <b>Action Mail Account</b>.<br> <i>SYSLOG</i> means the\n" +"disk space warning will be written to /var/log/messages. <i>IGNORE</i> means\n" "do nothing. <i>EXEC</i> runs the script specified in <b>Path to\n" "Script</b>. <i>SUSPEND</i> stops writing records to disk. <i>SINGLE</i>\n" "switches the system to single user mode. <i>HALT</i> shuts down the\n" "system.</p>\n" msgstr "" "<p>작업이 <i>EMAIL</i>로 설정된 경우\n" -"<b>작업 메일 계정</b>에 지정된 계정으로 경고 메일이 전송됩니다.<br> " -"<i>SYSLOG</i>는\n" +"<b>작업 메일 계정</b>에 지정된 계정으로 경고 메일이 전송됩니다.<br> <i>SYSLOG</i>는\n" "디스크 공간 경고가 /var/log/messages에 기록됨을 의미합니다. <i>IGNORE</i>는\n" -"아무 작업도 수행하지 않음을 의미합니다. <i>EXEC</i>는 <b>스크립트 경로</b>" -"에\n" -"지정된 스크립트를 실행합니다. <i>SUSPEND</i>는 디스크에 레코드 쓰기를 중지합" -"니다. <i>SINGLE</i>은\n" +"아무 작업도 수행하지 않음을 의미합니다. <i>EXEC</i>는 <b>스크립트 경로</b>에\n" +"지정된 스크립트를 실행합니다. <i>SUSPEND</i>는 디스크에 레코드 쓰기를 중지합니다. <i>SINGLE</i>은\n" "시스템을 단일 사용자 모드로 전환합니다. <i>HALT</i>는 시스템을\n" "종료합니다.</p>\n" -#. disk space dialog help 5/6 -#: src/include/audit-laf/helps.rb:150 +#. disk space dialog help 5/6 +#: src/include/audit-laf/helps.rb:150 msgid "" -"<p>You can also specify a <b>Disk Full Action</b> (disk has become full " -"already) and\n" -"a <b>Disk Error Action</b> (performed whenever an error is detected while " -"writing to disk).\n" +"<p>You can also specify a <b>Disk Full Action</b> (disk has become full already) and\n" +"a <b>Disk Error Action</b> (performed whenever an error is detected while writing to disk).\n" "Available actions are the same as above (except for <i>EMAIL</i>).</p>" msgstr "" "<p><b>디스크가 가득 참 동작</b>(디스크가 이미 가득 참)과\n" -"<b>디스크 오류 동작</b>(디스크에 쓰는 동안 오류가 감지될 때마다 수행됨)을 지" -"정할 수도 있습니다.\n" +"<b>디스크 오류 동작</b>(디스크에 쓰는 동안 오류가 감지될 때마다 수행됨)을 지정할 수도 있습니다.\n" "사용 가능한 동작은 위의 동작과 동일합니다(<i>EMAIL</i> 제외).</p>" -#. disk space dialog help 5/6 -#: src/include/audit-laf/helps.rb:156 +#. disk space dialog help 5/6 +#: src/include/audit-laf/helps.rb:156 msgid "" "<p><b>Note:</b> All scripts specified for <i>EXEC</i> must be owned\n" -"by 'root', have '0750' file permissions, and the full path name has to be " -"entered.</p>\n" +"by 'root', have '0750' file permissions, and the full path name has to be entered.</p>\n" msgstr "" "<p><b>참고:</b> <i>EXEC</i>에 대해 지정된 모든 스크립트는\n" -"'root'에 의해 소유되고 '0750' 파일 권한이 있어야 하며, 전체 경로 이름을 입력" -"해야 합니다.</p>\n" +"'root'에 의해 소유되고 '0750' 파일 권한이 있어야 하며, 전체 경로 이름을 입력해야 합니다.</p>\n" -#. rules dialog help 1/6 -#: src/include/audit-laf/helps.rb:160 +#. rules dialog help 1/6 +#: src/include/audit-laf/helps.rb:160 msgid "" "<p><b><big>Rules for auditctl</big></b><br>\n" "This dialog offers the possibility to enable or to disable the syscall\n" "auditing as well as to lock the audit configuration.\n" -"The selected flag from <b>Set Enabled Flag</b> will be added to the rules." +"The selected flag from <b>Set Enabled Flag</b> will be added to the rules.</p>" msgstr "" "<p><b><big>auditctl에 대한 규칙</big></b><br>\n" "이 대화 상자는 syscall 감사를 활성화 또는 비활성화하고\n" "감사 구성을 잠그는 기능을 제공합니다.\n" "<b>활성화된 플래그 설정</b>에서 선택한 플래그가 규칙에 추가됩니다.</p>" -#. rules dialog help 2/6 -#: src/include/audit-laf/helps.rb:167 -msgid "" -"<p><b>Note:</b><br>Locking the rules means they cannot be changed until next " -"reboot.</p>" -msgstr "" -"<p><b>참고:</b><br>규칙을 잠그면 다음 재부팅까지 규칙을 변경할 수 없습니다." +#. rules dialog help 2/6 +#: src/include/audit-laf/helps.rb:167 +msgid "<p><b>Note:</b><br>Locking the rules means they cannot be changed until next reboot.</p>" +msgstr "<p><b>참고:</b><br>규칙을 잠그면 다음 재부팅까지 규칙을 변경할 수 없습니다.</p>" -#. rules dialog help 3/6 -#: src/include/audit-laf/helps.rb:171 +#. rules dialog help 3/6 +#: src/include/audit-laf/helps.rb:171 msgid "" "<p>Enabling auditing without additional rules will cause the\n" -" applications which use <i>libaudit</i>, e.g. PAM to log to /var/log/audit/" -"audit.log (default).</p> " +" applications which use <i>libaudit</i>, e.g. PAM to log to /var/log/audit/audit.log (default).</p> " msgstr "" "<p>추가 규칙 없이 감사를 활성화하면\n" -" <i>libaudit</i>를 사용하는 응용 프로그램(예: PAM)이 /var/log/audit/audit.log" -"(기본값)에 로깅합니다.</p> " +" <i>libaudit</i>를 사용하는 응용 프로그램(예: PAM)이 /var/log/audit/audit.log(기본값)에 로깅합니다.</p> " -#. rules dialog help 4/6 -#: src/include/audit-laf/helps.rb:175 +#. rules dialog help 4/6 +#: src/include/audit-laf/helps.rb:175 msgid "" -"<p>You can also edit the rules manually, which we only recommended for " -"advanced users.<br>\n" +"<p>You can also edit the rules manually, which we only recommended for advanced users.<br>\n" "For more information about all options, see 'man auditctl'.</p>\n" msgstr "" -"<p>수동으로 규칙을 편집할 수도 있지만 이 작업은 고급 사용자에게만 권장됩니다." -"<br>\n" +"<p>수동으로 규칙을 편집할 수도 있지만 이 작업은 고급 사용자에게만 권장됩니다.<br>\n" "모든 옵션에 대한 자세한 내용은 'man auditctl'을 참조하십시오.</p>\n" -#. rules dialog help 5/6 -#: src/include/audit-laf/helps.rb:179 -msgid "" -"<p><b>Check Syntax</b> sends the rules via <i>auditctl</i> to the audit " -"subsystem and checks the syntax.<br><b>Restore</b> restores the settings " -"from /etc/audit/audit.rules.</p>\n" -msgstr "" -"<p><b>구문 확인</b>은 <i>auditctl</i>을 통해 규칙을 감사 하위 시스템으로 보내" -"고 구문을 확인합니다.<br><b>복원</b>은 /etc/audit/audit.rules에서 설정을 복원" -"합니다.</p>\n" +#. rules dialog help 5/6 +#: src/include/audit-laf/helps.rb:179 +msgid "<p><b>Check Syntax</b> sends the rules via <i>auditctl</i> to the audit subsystem and checks the syntax.<br><b>Restore</b> restores the settings from /etc/audit/audit.rules.</p>\n" +msgstr "<p><b>구문 확인</b>은 <i>auditctl</i>을 통해 규칙을 감사 하위 시스템으로 보내고 구문을 확인합니다.<br><b>복원</b>은 /etc/audit/audit.rules에서 설정을 복원합니다.</p>\n" -#. rules dialog help 6/6 -#: src/include/audit-laf/helps.rb:183 +#. rules dialog help 6/6 +#: src/include/audit-laf/helps.rb:183 msgid "" "<p>Click <b>Restore and Reset</b> to restore the rules and reset\n" "the changes (from previous syntax checks) by calling <i>auditctl</i>.<br>\n" @@ -851,52 +777,47 @@ "an example rules file.</p>\n" msgstr "" "<p><b>복원 및 재설정</b>을 클릭하여 규칙을 복원하고\n" -"<i>auditctl</i>을 호출하여 이전 구문 확인에서 식별된 변경사항을 재설정하십시" -"오.<br>\n" -"<b>로드</b>를 클릭하여 예제 규칙 파일을 로드할 수 있는 파일 선택 대화 상자" -"를\n" +"<i>auditctl</i>을 호출하여 이전 구문 확인에서 식별된 변경사항을 재설정하십시오.<br>\n" +"<b>로드</b>를 클릭하여 예제 규칙 파일을 로드할 수 있는 파일 선택 대화 상자를\n" "여십시오.</p>\n" -#. Header of tab in tab widget -#: src/include/audit-laf/wizards.rb:123 +#. Header of tab in tab widget +#: src/include/audit-laf/wizards.rb:123 msgid "&Dispatcher" msgstr "디스패처(&D)" -#. Header of tab in tab widget -#: src/include/audit-laf/wizards.rb:129 +#. Header of tab in tab widget +#: src/include/audit-laf/wizards.rb:129 msgid "Disk &Space" msgstr "디스크 공간(&S)" -#. Header of tab in tab widget -#. (auditctl is a program which sends the rules to the audit subsystem) -#: src/include/audit-laf/wizards.rb:136 +#. Header of tab in tab widget +#. (auditctl is a program which sends the rules to the audit subsystem) +#: src/include/audit-laf/wizards.rb:136 msgid "&Rules for 'auditctl'" msgstr "'auditctl'에 대한 규칙(&R)" -#. Initialization dialog contents -#: src/include/audit-laf/wizards.rb:230 +#. Initialization dialog contents +#: src/include/audit-laf/wizards.rb:230 msgid "Initializing..." msgstr "초기화 중..." -#. Do not check UI when running in CommandLine mode -#: src/modules/AuditLaf.rb:231 +#. Do not check UI when running in CommandLine mode +#: src/modules/AuditLaf.rb:231 msgid "The rules for auditctl are locked." msgstr "auditctl에 대한 규칙이 잠겼습니다." -#. skip it during initial and second stage or when create AY profile -#: src/modules/AuditLaf.rb:318 -msgid "" -"<p>To continue the configuration of Linux Auditing, the package <b>%1</b> " -"must be installed.</p>" -msgstr "" -"<p>Linux Auditing의 구성을 계속하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" +#. skip it during initial and second stage or when create AY profile +#: src/modules/AuditLaf.rb:318 +msgid "<p>To continue the configuration of Linux Auditing, the package <b>%1</b> must be installed.</p>" +msgstr "<p>Linux Auditing의 구성을 계속하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" -#: src/modules/AuditLaf.rb:321 +#: src/modules/AuditLaf.rb:321 msgid "<p>Install it now?</p>" msgstr "<p>지금 설치하시겠습니까?</p>" -#. additionally save initial settings -#: src/modules/AuditLaf.rb:357 +#. additionally save initial settings +#: src/modules/AuditLaf.rb:357 msgid "" "Cannot start the audit daemon.\n" "Please check /var/log/messages for auditd errors.\n" @@ -905,66 +826,65 @@ msgstr "" "감사 데몬을 시작할 수 없습니다.\n" "/var/log/messages에서 감사 오류를 확인하십시오.\n" -"YaST2 Control Center의 'Miscellaneous' 그룹에서 'System Log' 모듈을 사용할 " -"수 있습니다." +"YaST2 Control Center의 'Miscellaneous' 그룹에서 'System Log' 모듈을 사용할 수 있습니다." -#. AuditLaf read dialog caption -#: src/modules/AuditLaf.rb:376 +#. AuditLaf read dialog caption +#: src/modules/AuditLaf.rb:376 msgid "Initializing Audit Configuration" msgstr "감사 구성 초기화 중" -#. Progress stage 1/4 -#: src/modules/AuditLaf.rb:391 +#. Progress stage 1/4 +#: src/modules/AuditLaf.rb:391 msgid "Check for installed packages" msgstr "설치된 패키지 확인" -#. Progress stage 2/4 -#: src/modules/AuditLaf.rb:393 +#. Progress stage 2/4 +#: src/modules/AuditLaf.rb:393 msgid "Read the configuration of auditd" msgstr "auditd의 구성 읽기" -#. Progress stage 3/4 -#: src/modules/AuditLaf.rb:395 +#. Progress stage 3/4 +#: src/modules/AuditLaf.rb:395 msgid "Read the rules file" msgstr "규칙 파일 읽기" -#. Progress stage 4/4 -#: src/modules/AuditLaf.rb:397 +#. Progress stage 4/4 +#: src/modules/AuditLaf.rb:397 msgid "Check status of auditd" msgstr "auditd 상태 확인" -#. Progress stage 1/4 -#: src/modules/AuditLaf.rb:401 +#. Progress stage 1/4 +#: src/modules/AuditLaf.rb:401 msgid "Checking for packages..." msgstr "패키지를 확인하는 중입니다." -#. Progress step 2/4 -#: src/modules/AuditLaf.rb:403 +#. Progress step 2/4 +#: src/modules/AuditLaf.rb:403 msgid "Reading the configuration..." msgstr "구성을 읽는 중..." -#. Progress step 3/4 -#: src/modules/AuditLaf.rb:405 +#. Progress step 3/4 +#: src/modules/AuditLaf.rb:405 msgid "Reading the rules file..." msgstr "규칙 파일을 읽는 중..." -#. Progress step 4/4 -#: src/modules/AuditLaf.rb:407 +#. Progress step 4/4 +#: src/modules/AuditLaf.rb:407 msgid "Checking status..." msgstr "상태 확인 중..." -#. Report error -#: src/modules/AuditLaf.rb:434 +#. Report error +#: src/modules/AuditLaf.rb:434 msgid "Cannot read auditd.conf." msgstr "auditd.conf를 읽을 수 없습니다." -#. Error message -#: src/modules/AuditLaf.rb:444 +#. Error message +#: src/modules/AuditLaf.rb:444 msgid "Cannot read audit.rules." msgstr "audit.rules를 읽을 수 없습니다." -#. question shown in a popup about start of audit daemon -#: src/modules/AuditLaf.rb:463 +#. question shown in a popup about start of audit daemon +#: src/modules/AuditLaf.rb:463 msgid "" "Do you want to start it and enable start at boot\n" "or only start the daemon for now?" @@ -972,12 +892,12 @@ "지금 시작하고 부팅 시 시작을 활성화하시겠습니까\n" "또는 데몬만 시작하시겠습니까?" -#: src/modules/AuditLaf.rb:466 +#: src/modules/AuditLaf.rb:466 msgid "The daemon 'auditd' doesn't run.\n" msgstr "데몬 'auditd'가 실행되지 않습니다.\n" -#. message about loaded kernel module -#: src/modules/AuditLaf.rb:470 +#. message about loaded kernel module +#: src/modules/AuditLaf.rb:470 msgid "" "The 'apparmor' kernel module is loaded.\n" "The kernel uses a running audit daemon to log audit\n" @@ -987,29 +907,29 @@ "커널에서 실행 중인 감사 데몬으로 감사 이벤트를\n" "/var/log/audit/audit.log(기본값)에 기록합니다.\n" -#. Headline of a popup -#: src/modules/AuditLaf.rb:477 +#. Headline of a popup +#: src/modules/AuditLaf.rb:477 msgid "Start of Audit Daemon" msgstr "감사 데몬 시작" -#. label of three buttons belonging to the popup -#: src/modules/AuditLaf.rb:479 +#. label of three buttons belonging to the popup +#: src/modules/AuditLaf.rb:479 msgid "Start and &Enable" msgstr "시작 및 활성화(&E)" -#: src/modules/AuditLaf.rb:479 +#: src/modules/AuditLaf.rb:479 msgid "&Start" msgstr "시작(&S)" -#: src/modules/AuditLaf.rb:479 +#: src/modules/AuditLaf.rb:479 msgid "&Do not start" msgstr "시작 안 함(&D)" -#: src/modules/AuditLaf.rb:488 +#: src/modules/AuditLaf.rb:488 msgid "Cannot start the audit daemon." msgstr "감사 데몬을 시작할 수 없습니다." -#: src/modules/AuditLaf.rb:489 +#: src/modules/AuditLaf.rb:489 msgid "" "The rules may be locked.\n" "Continue to check the rules. You can change\n" @@ -1021,37 +941,37 @@ "'활성화된 플래그'를 변경할 수 있지만 변경사항을 활성화하려면\n" "변경 후에 재부팅해야 합니다.\n" -#. Auditd read dialog caption -#: src/modules/AuditLaf.rb:545 +#. Auditd read dialog caption +#: src/modules/AuditLaf.rb:545 msgid "Saving Audit Configuration" msgstr "감사 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/AuditLaf.rb:561 +#. Progress stage 1/2 +#: src/modules/AuditLaf.rb:561 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress stage 2/2 -#: src/modules/AuditLaf.rb:563 +#. Progress stage 2/2 +#: src/modules/AuditLaf.rb:563 msgid "Write the rules" msgstr "규칙 기록" -#. Progress step 1/2 -#: src/modules/AuditLaf.rb:567 +#. Progress step 1/2 +#: src/modules/AuditLaf.rb:567 msgid "Writing the settings..." msgstr "세팅을 쓰는 중..." -#. Progress step 2/2 -#: src/modules/AuditLaf.rb:569 +#. Progress step 2/2 +#: src/modules/AuditLaf.rb:569 msgid "Writing the rules..." msgstr "규칙을 쓰는 중..." -#. check first whether rules are already locked -#: src/modules/AuditLaf.rb:585 +#. check first whether rules are already locked +#: src/modules/AuditLaf.rb:585 msgid "The rules are already locked." msgstr "규칙이 이미 잠겼습니다." -#: src/modules/AuditLaf.rb:586 +#: src/modules/AuditLaf.rb:586 msgid "" "Do you want to change the 'Enabled Flag'?\n" "If yes, the new rules will be written to /etc/audit/audit.rules.\n" @@ -1061,27 +981,27 @@ "[예]를 선택하면 새 규칙이 /etc/audit/audit.rules에 기록됩니다.\n" "변경사항을 적용하려면 변경 후에 시스템을 재부팅하십시오.\n" -#. Error message -#: src/modules/AuditLaf.rb:611 +#. Error message +#: src/modules/AuditLaf.rb:611 msgid "Restart of the audit daemon failed." msgstr "감사 데몬 다시 시작에 실패했습니다." -#. Error message -#: src/modules/AuditLaf.rb:618 +#. Error message +#: src/modules/AuditLaf.rb:618 msgid "Cannot write settings to auditd.conf." msgstr "auditd.conf에 설정을 쓸 수 없습니다." -#. Error message, rules cannot be set -#: src/modules/AuditLaf.rb:649 +#. Error message, rules cannot be set +#: src/modules/AuditLaf.rb:649 msgid "Start yast2-audit-laf again and check the rules." msgstr "yast2-audit-laf를 다시 시작하고 규칙을 확인하십시오." -#: src/modules/AuditLaf.rb:655 +#: src/modules/AuditLaf.rb:655 msgid "Cannot write settings to auditd.rules." msgstr "auditd.rules에 설정을 쓸 수 없습니다." -#. Create a textual summary and a list of unconfigured cards -#. @return summary of the current configuration -#: src/modules/AuditLaf.rb:704 +#. Create a textual summary and a list of unconfigured cards +#. @return summary of the current configuration +#: src/modules/AuditLaf.rb:704 msgid "Log file" msgstr "로그 파일" Modified: branches/SLE12-SP3/yast/ko/po/auth-client.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/auth-client.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/auth-client.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,283 +14,254 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Enable and start the service. -#: src/lib/auth/authconf.rb:142 -msgid "" -"Failed to start service %s. Please use system journal (journalctl -n -u %s) " -"to diagnose." -msgstr "" -"%s 서비스를 시작하지 못했습니다. 시스템 저널(journalctl -n -u %s)을 사용하여 " -"진단하십시오." +#. Enable and start the service. +#: src/lib/auth/authconf.rb:142 +msgid "Failed to start service %s. Please use system journal (journalctl -n -u %s) to diagnose." +msgstr "%s 서비스를 시작하지 못했습니다. 시스템 저널(journalctl -n -u %s)을 사용하여 진단하십시오." -#. Disable and stop the service. -#: src/lib/auth/authconf.rb:150 -msgid "" -"Failed to stop service %s. Please use system journal (journalctl -n -u %s) " -"to diagnose." -msgstr "" -"%s 서비스를 중단하지 못했습니다. 시스템 저널(journalctl -n -u %s)을 사용하여 " -"진단하십시오." +#. Disable and stop the service. +#: src/lib/auth/authconf.rb:150 +msgid "Failed to stop service %s. Please use system journal (journalctl -n -u %s) to diagnose." +msgstr "%s 서비스를 중단하지 못했습니다. 시스템 저널(journalctl -n -u %s)을 사용하여 진단하십시오." -#. Only install the required provider packages. By convention, they are named 'sssd-*'. -#: src/lib/auth/authconf.rb:395 +#. Only install the required provider packages. By convention, they are named 'sssd-*'. +#: src/lib/auth/authconf.rb:395 msgid "Failed to install software packages required for running SSSD." msgstr "SSSD 실행에 필요한 소프트웨어 패키지를 설치하지 못했습니다." -#. provides /etc/openldap/ldap.conf -#: src/lib/auth/authconf.rb:509 +#. provides /etc/openldap/ldap.conf +#: src/lib/auth/authconf.rb:509 msgid "Failed to install software packages required for LDAP." msgstr "LDAP에 필요한 소프트웨어 패키지를 설치하지 못했습니다." -#. Calculate package requirements -#: src/lib/auth/authconf.rb:758 +#. Calculate package requirements +#: src/lib/auth/authconf.rb:758 msgid "Failed to install software packages required for Kerberos." msgstr "Kerberos에 필요한 소프트웨어 패키지를 설치하지 못했습니다." -#. Install required packages -#: src/lib/auth/authconf.rb:832 +#. Install required packages +#: src/lib/auth/authconf.rb:832 msgid "Failed to install software packages required by autofs/nscd daemons." msgstr "autofs/nscd 데몬에 필요한 소프트웨어 패키지를 설치하지 못했습니다." -#. Call package installer to install Samba and Kerberos if it has not yet been installed. -#: src/lib/auth/authconf.rb:883 -msgid "" -"Failed to install Samba & Kerberos required by Active Directory operations." +#. Call package installer to install Samba and Kerberos if it has not yet been installed. +#: src/lib/auth/authconf.rb:883 +msgid "Failed to install Samba & Kerberos required by Active Directory operations." msgstr "Active Directory 작업에 필요한 Samba & Kerberos를 설치하지 못했습니다." -#. Run "net ads join". Return tuple of boolean success status and command output. -#. Kerberos configuration must have been read before calling this function. -#. Kerberos configuration will be written. -#: src/lib/auth/authconf.rb:942 +#. Run "net ads join". Return tuple of boolean success status and command output. +#. Kerberos configuration must have been read before calling this function. +#. Kerberos configuration will be written. +#: src/lib/auth/authconf.rb:942 msgid "Nothing is done because AD is not configured" msgstr "AD를 구성하지 않았기 때문에 아무 작업도 이루어지지 않습니다." -#: src/lib/auth/authconf.rb:945 +#: src/lib/auth/authconf.rb:945 msgid "Failed to install Samba" msgstr "Samba를 설치하지 못했습니다." -#. Configure Kerberos -#: src/lib/auth/authconf.rb:950 +#. Configure Kerberos +#: src/lib/auth/authconf.rb:950 msgid "" "Cannot locate Active Directory's Kerberos via DNS lookup.\n" -"Please configure your network environment to use AD server as the name " -"resolver." +"Please configure your network environment to use AD server as the name resolver." msgstr "" "DNS 조회를 통해 Active Directory의 Kerberos를 찾을 수 없습니다.\n" "AD 서버를 이름 확인자로 사용하도록 네트워크 환경을 구성하십시오." -#. Local only -#: src/lib/auth/authconf.rb:1063 +#. Local only +#: src/lib/auth/authconf.rb:1063 msgid "Only use local authentication" msgstr "로컬 인증만 사용" -#. SSSD is configured -#: src/lib/auth/authconf.rb:1068 +#. SSSD is configured +#: src/lib/auth/authconf.rb:1068 msgid "(daemon is inactive)" msgstr "(데몬 비활성 상태)" -#. LDAP and/or Kerberos is configured -#: src/lib/auth/authconf.rb:1074 +#. LDAP and/or Kerberos is configured +#: src/lib/auth/authconf.rb:1074 msgid "LDAP is enabled but the setup is incomplete" msgstr "LDAP가 활성화되었으나 설정이 완료되지 않음" -#: src/lib/auth/authconf.rb:1076 +#: src/lib/auth/authconf.rb:1076 msgid "via LDAP on %s" msgstr "%s에서 LDAP를 통해" -#. 'and' as in "authenticate via LDAP and Kerberos" -#: src/lib/auth/authconf.rb:1082 +#. 'and' as in "authenticate via LDAP and Kerberos" +#: src/lib/auth/authconf.rb:1082 msgid " and " msgstr " 및 " -#: src/lib/auth/authconf.rb:1086 +#: src/lib/auth/authconf.rb:1086 msgid "via Kerberos" msgstr "Kerberos를 통해" -#: src/lib/auth/authconf.rb:1088 +#: src/lib/auth/authconf.rb:1088 msgid "via Kerberos on %s" msgstr "%s에서 Kerberos를 통해" -#. Edit Kerberos realm configuration -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:52 +#. Edit Kerberos realm configuration +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:52 msgid "Realm name" msgstr "영역 이름" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:53 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:53 msgid "Map Domain Name to the Realm (example.com -> EXAMPLE.COM)" msgstr "도메인 이름을 영역에 매핑(example.com -> EXAMPLE.COM)" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:55 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:55 msgid "Map Wild Card Domain Name to the Realm (*.example.com -> EXAMPLE.COM)" msgstr "와일드카드 도메인 이름을 영역에 매핑(*.example.com -> EXAMPLE.COM)" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:58 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:58 msgid "Host Name of Administration Server (Optional)" msgstr "관리 서버의 호스트 이름(선택 사항)" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:60 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:60 msgid "Host Name of Master Key Distribution Server (Optional)" msgstr "마스터 키 배포 서버의 호스트 이름(선택 사항)" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:62 -msgid "" -"Key Distribution Centres (Optional If Auto-Discovery via DNS is Enabled)" +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:62 +msgid "Key Distribution Centres (Optional If Auto-Discovery via DNS is Enabled)" msgstr "키 배포 센터(DNS를 통한 자동 검색을 활성화한 경우 선택 사항)" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:68 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:68 msgid "Custom Mappings of Principal Names to User Names" msgstr "프린시펄 이름을 사용자 이름에 사용자 정의 매핑" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:69 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:69 msgid "Principal Name" msgstr "프린시펄 이름" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:69 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:69 msgid "User Name" msgstr "사용자 이름" -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:74 +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:74 msgid "Custom Rules for Mapping Principal Names to User Names" msgstr "프린시펄 이름을 사용자 이름에 매핑하는 사용자 정의 규칙" -#. Add a KDC -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:89 +#. Add a KDC +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:89 msgid "Please type in the host name of Key Distribution Centre:" msgstr "키 배포 센터의 호스트 이름을 입력하십시오." -#. Add an auth_to_local -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:102 +#. Add an auth_to_local +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:102 msgid "Please type in the auth_to_local rule:" msgstr "auth_to_local 규칙을 입력하십시오." -#. Add an auth_to_local_names -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:115 -msgid "" -"Please type in the principal name and user name in the format of " -"\"princ_name = user_name\":" -msgstr "" -"프린시펄 이름과 사용자 이름을 \"princ_name = user_name\" 형식으로 입력하십시" -"오." +#. Add an auth_to_local_names +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:115 +msgid "Please type in the principal name and user name in the format of \"princ_name = user_name\":" +msgstr "프린시펄 이름과 사용자 이름을 \"princ_name = user_name\" 형식으로 입력하십시오." -#. Save realm settings -#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:135 +#. Save realm settings +#: src/lib/authui/ldapkrb/edit_realm_dialog.rb:135 msgid "Please enter realm name." msgstr "영역 이름을 입력하십시오." -#. Edit more configuration items for Kerberos. -#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:48 +#. Edit more configuration items for Kerberos. +#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:48 msgid "Default Location of Keytab File" msgstr "Keytab 파일의 기본 위치" -#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:50 +#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:50 msgid "Encryption Types for TGS (Space separated)" msgstr "TGS에 대한 암호화 유형(공백으로 구분)" -#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:52 +#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:52 msgid "Encryption Types for Ticket (Space separated)" msgstr "티켓에 대한 암호화 유형(공백으로 구분)" -#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:54 +#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:54 msgid "Encryption Types for Sessions (Space separated)" msgstr "세션에 대한 암호화 유형(공백으로 구분)" -#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:56 +#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:56 msgid "Additional Addresses to be put in Ticket (Comma separated)" msgstr "티켓에 입력할 추가 주소(쉼표로 구분)" -#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:59 +#: src/lib/authui/ldapkrb/krb_extended_opts_dialog.rb:59 msgid "Reset" msgstr "재설정" -#. The user cannot possibly understand the implication of 0 in search timeout if the user uses YaST -#: src/lib/authui/ldapkrb/ldap_extended_opts_dialog.rb:49 +#. The user cannot possibly understand the implication of 0 in search timeout if the user uses YaST +#: src/lib/authui/ldapkrb/ldap_extended_opts_dialog.rb:49 msgid "Timeout for Bind Operations in Seconds" msgstr "바인드 작업에 대한 시간 제한(초)" -#: src/lib/authui/ldapkrb/ldap_extended_opts_dialog.rb:51 +#: src/lib/authui/ldapkrb/ldap_extended_opts_dialog.rb:51 msgid "Timeout for Search Operations in Seconds" msgstr "검색 작업에 대한 시간 제한(초)" -#. the last saved tab -#: src/lib/authui/ldapkrb/main_dialog.rb:44 -#: src/lib/authui/ldapkrb/main_dialog.rb:63 +#. the last saved tab +#: src/lib/authui/ldapkrb/main_dialog.rb:44 +#: src/lib/authui/ldapkrb/main_dialog.rb:63 msgid "Use a Directory as Identity Provider (LDAP)" msgstr "디렉토리를 ID 공급자로 사용(LDAP)" -#: src/lib/authui/ldapkrb/main_dialog.rb:44 -#: src/lib/authui/ldapkrb/main_dialog.rb:67 +#: src/lib/authui/ldapkrb/main_dialog.rb:44 +#: src/lib/authui/ldapkrb/main_dialog.rb:67 msgid "Authentication via Kerberos" msgstr "Kerberos를 통한 인증" -#. LDAP tab events -#: src/lib/authui/ldapkrb/main_dialog.rb:76 +#. LDAP tab events +#: src/lib/authui/ldapkrb/main_dialog.rb:76 msgid "" "This computer is currently using SSSD to authenticate users.\n" -"Before you may use legacy LDAP authentication (pam_ldap), please disable " -"SSSD from \"User Logon Management\"." +"Before you may use legacy LDAP authentication (pam_ldap), please disable SSSD from \"User Logon Management\"." msgstr "" "이 컴퓨터는 현재 SSSD를 사용하여 사용자를 인증합니다.\n" -"레거시 LDAP 인증(pam_ldap)을 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD" -"를 비활성화하십시오." +"레거시 LDAP 인증(pam_ldap)을 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD를 비활성화하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:84 +#: src/lib/authui/ldapkrb/main_dialog.rb:84 msgid "" -"This computer is currently reading user database from SSSD identity " -"provider.\n" -"Before you may use LDAP user database (nss_ldap), please disable SSSD user " -"database from \"User Logon Management\"." +"This computer is currently reading user database from SSSD identity provider.\n" +"Before you may use LDAP user database (nss_ldap), please disable SSSD user database from \"User Logon Management\"." msgstr "" "이 컴퓨터는 현재 SSSD ID 공급자에서 사용자 데이터베이스를 읽습니다.\n" -"LDAP 사용자 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리\"에" -"서 SSSD 사용자 데이터베이스를 비활성화하십시오." +"LDAP 사용자 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD 사용자 데이터베이스를 비활성화하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:92 +#: src/lib/authui/ldapkrb/main_dialog.rb:92 msgid "" -"This computer is currently reading group database from SSSD identity " -"provider.\n" -"Before you may use LDAP group database (nss_ldap), please disable SSSD group " -"database from \"User Logon Management\"." +"This computer is currently reading group database from SSSD identity provider.\n" +"Before you may use LDAP group database (nss_ldap), please disable SSSD group database from \"User Logon Management\"." msgstr "" "이 컴퓨터는 현재 SSSD ID 공급자에서 그룹 데이터베이스를 읽습니다.\n" -"LDAP 그룹 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리\"에" -"서 SSSD 그룹 데이터베이스를 비활성화하십시오." +"LDAP 그룹 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD 그룹 데이터베이스를 비활성화하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:100 +#: src/lib/authui/ldapkrb/main_dialog.rb:100 msgid "" -"This computer is currently reading sudoers database from SSSD identity " -"provider.\n" -"Before you may use LDAP sudoers database (nss_ldap), please disable SSSD " -"sudo database from \"User Logon Management\"." +"This computer is currently reading sudoers database from SSSD identity provider.\n" +"Before you may use LDAP sudoers database (nss_ldap), please disable SSSD sudo database from \"User Logon Management\"." msgstr "" "이 컴퓨터는 현재 SSSD ID 공급자에서 sudoers 데이터베이스를 읽습니다.\n" -"LDAP sudoers 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리" -"\"에서 SSSD sudo 데이터베이스를 비활성화하십시오." +"LDAP sudoers 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD sudo 데이터베이스를 비활성화하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:108 +#: src/lib/authui/ldapkrb/main_dialog.rb:108 msgid "" -"This computer is currently reading automount database from SSSD identity " -"provider.\n" -"Before you may use LDAP automount database (nss_ldap), please disable SSSD " -"automount database from \"User Logon Management\"." +"This computer is currently reading automount database from SSSD identity provider.\n" +"Before you may use LDAP automount database (nss_ldap), please disable SSSD automount database from \"User Logon Management\"." msgstr "" "이 컴퓨터는 현재 SSSD ID 공급자에서 automount 데이터베이스를 읽습니다.\n" -"LDAP automount 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리" -"\"에서 SSSD automount 데이터베이스를 비활성화하십시오." +"LDAP automount 데이터베이스(nss_ldap)를 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD automount 데이터베이스를 비활성화하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:118 +#: src/lib/authui/ldapkrb/main_dialog.rb:118 msgid "Please enter server URI." msgstr "서버 URI를 입력하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:126 +#: src/lib/authui/ldapkrb/main_dialog.rb:126 msgid "Please enter DN of search base." msgstr "검색 기준의 DN을 입력하십시오." -#. Test URI input -#: src/lib/authui/ldapkrb/main_dialog.rb:133 +#. Test URI input +#: src/lib/authui/ldapkrb/main_dialog.rb:133 msgid "Successfully contacted LDAP server on URI %s!" msgstr "URI %s에서 LDAP 서버에 연결했습니다." -#: src/lib/authui/ldapkrb/main_dialog.rb:135 +#: src/lib/authui/ldapkrb/main_dialog.rb:135 msgid "" "Connection check has failed on URI %s.\n" "\n" @@ -300,12 +271,12 @@ "\n" "%s" -#. Test host address input, construct URI for each one. -#: src/lib/authui/ldapkrb/main_dialog.rb:154 +#. Test host address input, construct URI for each one. +#: src/lib/authui/ldapkrb/main_dialog.rb:154 msgid "Successfully contacted LDAP server on host %s" msgstr "%s 호스트에서 LDAP 서버에 연결했습니다." -#: src/lib/authui/ldapkrb/main_dialog.rb:156 +#: src/lib/authui/ldapkrb/main_dialog.rb:156 msgid "" "Connection check has failed on host %s.\n" "\n" @@ -315,12 +286,10 @@ "\n" "%s" -#: src/lib/authui/ldapkrb/main_dialog.rb:163 +#: src/lib/authui/ldapkrb/main_dialog.rb:163 msgid "" -"The name service cache is should only used with legacy LDAP identity " -"provider,\n" -"but your system currently has authentication domain enabled, which is not " -"compatible with the cache.\n" +"The name service cache is should only used with legacy LDAP identity provider,\n" +"but your system currently has authentication domain enabled, which is not compatible with the cache.\n" "\n" "Do you still wish to enable the cache?" msgstr "" @@ -329,509 +298,479 @@ "\n" "캐시를 활성화하시겠습니까?" -#. Kerberos tab events -#: src/lib/authui/ldapkrb/main_dialog.rb:176 +#. Kerberos tab events +#: src/lib/authui/ldapkrb/main_dialog.rb:176 msgid "" "This computer is currently using SSSD to authenticate users.\n" -"Before you may use Kerberos authentication (pam_krb5), please disable SSSD " -"from \"User Logon Management\"." +"Before you may use Kerberos authentication (pam_krb5), please disable SSSD from \"User Logon Management\"." msgstr "" "이 컴퓨터는 현재 SSSD를 사용하여 사용자를 인증합니다.\n" -"Kerberos 인증(pam_krb5)을 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD를 " -"비활성화하십시오." +"Kerberos 인증(pam_krb5)을 사용하려면 먼저 \"사용자 로그온 관리\"에서 SSSD를 비활성화하십시오." -#. Save Kerberos -#: src/lib/authui/ldapkrb/main_dialog.rb:184 -#: src/lib/authui/ldapkrb/main_dialog.rb:194 -#: src/lib/authui/ldapkrb/main_dialog.rb:205 -#: src/lib/authui/ldapkrb/main_dialog.rb:210 -#: src/lib/authui/ldapkrb/main_dialog.rb:316 -#: src/lib/authui/ldapkrb/main_dialog.rb:408 -#: src/lib/authui/ldapkrb/main_dialog.rb:432 +#. Save Kerberos +#: src/lib/authui/ldapkrb/main_dialog.rb:184 +#: src/lib/authui/ldapkrb/main_dialog.rb:194 +#: src/lib/authui/ldapkrb/main_dialog.rb:205 +#: src/lib/authui/ldapkrb/main_dialog.rb:210 +#: src/lib/authui/ldapkrb/main_dialog.rb:316 +#: src/lib/authui/ldapkrb/main_dialog.rb:408 +#: src/lib/authui/ldapkrb/main_dialog.rb:432 msgid "(not specified)" msgstr "(지정되지 않음)" -#: src/lib/authui/ldapkrb/main_dialog.rb:202 +#: src/lib/authui/ldapkrb/main_dialog.rb:202 msgid "Are you sure to delete realm %s?" msgstr "영역 %s을(를) 삭제하시겠습니까?" -#: src/lib/authui/ldapkrb/main_dialog.rb:334 +#: src/lib/authui/ldapkrb/main_dialog.rb:334 msgid "Allow LDAP Users To Authenticate (pam_ldap)" msgstr "LDAP 사용자가 인증하도록 허용(pam_ldap)" -#: src/lib/authui/ldapkrb/main_dialog.rb:335 +#: src/lib/authui/ldapkrb/main_dialog.rb:335 msgid "Cache LDAP Entries For Faster Response (nscd)" msgstr "빠른 응답을 위해 LDAP 항목 캐시(nscd)" -#: src/lib/authui/ldapkrb/main_dialog.rb:336 -#: src/lib/authui/ldapkrb/main_dialog.rb:405 +#: src/lib/authui/ldapkrb/main_dialog.rb:336 +#: src/lib/authui/ldapkrb/main_dialog.rb:405 msgid "Automatically Create Home Directory" msgstr "홈 디렉토리 자동으로 생성" -#: src/lib/authui/ldapkrb/main_dialog.rb:338 +#: src/lib/authui/ldapkrb/main_dialog.rb:338 msgid "Read the following items from LDAP data source:" msgstr "LDAP 데이터 원본에서 다음 항목 읽기:" -#: src/lib/authui/ldapkrb/main_dialog.rb:339 -#: src/lib/authui/sssd/main_dialog.rb:80 +#: src/lib/authui/ldapkrb/main_dialog.rb:339 +#: src/lib/authui/sssd/main_dialog.rb:80 msgid "Users" msgstr "사용자" -#: src/lib/authui/ldapkrb/main_dialog.rb:340 -#: src/lib/authui/sssd/main_dialog.rb:81 +#: src/lib/authui/ldapkrb/main_dialog.rb:340 +#: src/lib/authui/sssd/main_dialog.rb:81 msgid "Groups" msgstr "그룹" -#: src/lib/authui/ldapkrb/main_dialog.rb:341 -#: src/lib/authui/sssd/main_dialog.rb:82 +#: src/lib/authui/ldapkrb/main_dialog.rb:341 +#: src/lib/authui/sssd/main_dialog.rb:82 msgid "Super-User Commands (sudo)" msgstr "수퍼 사용자 명령(sudo)" -#: src/lib/authui/ldapkrb/main_dialog.rb:342 +#: src/lib/authui/ldapkrb/main_dialog.rb:342 msgid "Network Disk Locations (automount)" msgstr "네트워크 디스크 위치(automount)" -#: src/lib/authui/ldapkrb/main_dialog.rb:344 +#: src/lib/authui/ldapkrb/main_dialog.rb:344 msgid "Enter LDAP server locations (space separated), in either format:" msgstr "LDAP 서버 위치(공백으로 구분)를 다음 형식 중 하나로 입력하십시오." -#: src/lib/authui/ldapkrb/main_dialog.rb:345 +#: src/lib/authui/ldapkrb/main_dialog.rb:345 msgid "- Host name or IP and port number (ip:port)" msgstr "- 호스트 이름 또는 IP 및 포트 번호(ip:port)" -#: src/lib/authui/ldapkrb/main_dialog.rb:346 +#: src/lib/authui/ldapkrb/main_dialog.rb:346 msgid "- URI (ldap://server:port, ldaps://server:port)" msgstr "- URI(ldap://server:port, ldaps://server:port)" -#: src/lib/authui/ldapkrb/main_dialog.rb:348 +#: src/lib/authui/ldapkrb/main_dialog.rb:348 msgid "DN of Search Base (e.g. dc=example,dc=com)" msgstr "검색 기준의 DN(예: dc=example,dc=com)" -#: src/lib/authui/ldapkrb/main_dialog.rb:352 +#: src/lib/authui/ldapkrb/main_dialog.rb:352 msgid "DN of Bind User (Leave Empty for Anonymous Bind)" msgstr "바인드 사용자의 DN(익명 바인드의 경우 비워 둠)" -#: src/lib/authui/ldapkrb/main_dialog.rb:354 +#: src/lib/authui/ldapkrb/main_dialog.rb:354 msgid "Password of the Bind User (Leave Empty for Anonymous Bind)" msgstr "바인드 사용자의 비밀번호(익명 바인드의 경우 비워 둠)" -#: src/lib/authui/ldapkrb/main_dialog.rb:357 +#: src/lib/authui/ldapkrb/main_dialog.rb:357 msgid "Identify Group Members by Their DNs (RFC2307bis)" msgstr "DN으로 그룹 구성원 식별(RFC2307bis)" -#: src/lib/authui/ldapkrb/main_dialog.rb:359 +#: src/lib/authui/ldapkrb/main_dialog.rb:359 msgid "Leave LDAP Connections Open for Consecutive Requests" msgstr "연속 요청을 위해 LDAP 연결을 열어 둠" -#: src/lib/authui/ldapkrb/main_dialog.rb:362 +#: src/lib/authui/ldapkrb/main_dialog.rb:362 msgid "Secure LDAP communication" msgstr "보안 LDAP 커뮤니케이션" -#: src/lib/authui/ldapkrb/main_dialog.rb:363 +#: src/lib/authui/ldapkrb/main_dialog.rb:363 msgid "Do Not Use Security" msgstr "보안 사용 안 함" -#: src/lib/authui/ldapkrb/main_dialog.rb:364 +#: src/lib/authui/ldapkrb/main_dialog.rb:364 msgid "Secure Communication via TLS" msgstr "TLS를 통한 보안 커뮤니케이션" -#: src/lib/authui/ldapkrb/main_dialog.rb:365 +#: src/lib/authui/ldapkrb/main_dialog.rb:365 msgid "Secure Communication via StartTLS" msgstr "StartTLS를 통한 보안 커뮤니케이션" -#: src/lib/authui/ldapkrb/main_dialog.rb:368 +#: src/lib/authui/ldapkrb/main_dialog.rb:368 msgid "Test Connection" msgstr "연결 테스트" -#: src/lib/authui/ldapkrb/main_dialog.rb:368 -#: src/lib/authui/ldapkrb/main_dialog.rb:428 -#: src/lib/authui/sssd/main_dialog.rb:186 +#: src/lib/authui/ldapkrb/main_dialog.rb:368 +#: src/lib/authui/ldapkrb/main_dialog.rb:428 +#: src/lib/authui/sssd/main_dialog.rb:186 msgid "Extended Options" msgstr "확장 옵션" -#. If not specified, append the default port number -#: src/lib/authui/ldapkrb/main_dialog.rb:403 +#. If not specified, append the default port number +#: src/lib/authui/ldapkrb/main_dialog.rb:403 msgid "Allow Kerberos Users To Authenticate (pam_krb5)" msgstr "Kerberos 사용자가 인증하도록 허용(pam_krb5)" -#: src/lib/authui/ldapkrb/main_dialog.rb:407 +#: src/lib/authui/ldapkrb/main_dialog.rb:407 msgid "Default Realm For User Login:" msgstr "사용자 로그인의 기본 영역:" -#: src/lib/authui/ldapkrb/main_dialog.rb:409 +#: src/lib/authui/ldapkrb/main_dialog.rb:409 msgid "All Authentication Realms" msgstr "모든 인증 영역" -#: src/lib/authui/ldapkrb/main_dialog.rb:411 +#: src/lib/authui/ldapkrb/main_dialog.rb:411 msgid "Add Realm" msgstr "영역 추가" -#: src/lib/authui/ldapkrb/main_dialog.rb:411 +#: src/lib/authui/ldapkrb/main_dialog.rb:411 msgid "Edit Realm" msgstr "영역 편집" -#: src/lib/authui/ldapkrb/main_dialog.rb:411 +#: src/lib/authui/ldapkrb/main_dialog.rb:411 msgid "Delete Realm" msgstr "영역 삭제" -#: src/lib/authui/ldapkrb/main_dialog.rb:414 +#: src/lib/authui/ldapkrb/main_dialog.rb:414 msgid "Use DNS TXT Record to Discover Realms" msgstr "DNS TXT 레코드를 사용하여 영역 검색" -#: src/lib/authui/ldapkrb/main_dialog.rb:416 +#: src/lib/authui/ldapkrb/main_dialog.rb:416 msgid "Use DNS SVC record to Discover KDC servers" msgstr "DNS SVC 레코드를 사용하여 KDC 서버 검색" -#: src/lib/authui/ldapkrb/main_dialog.rb:419 +#: src/lib/authui/ldapkrb/main_dialog.rb:419 msgid "Allow Insecure Encryption (Windows NT)" msgstr "보안되지 않은 암호화 허용(Windows NT)" -#: src/lib/authui/ldapkrb/main_dialog.rb:421 +#: src/lib/authui/ldapkrb/main_dialog.rb:421 msgid "Allow KDC on Other Networks to Issue Authentication Tickets" msgstr "다른 네트워크의 KDC가 인증 티켓을 발급하도록 허용" -#: src/lib/authui/ldapkrb/main_dialog.rb:423 +#: src/lib/authui/ldapkrb/main_dialog.rb:423 msgid "Allow Kerberos-Enabled Services to Take on The Identity Of a User" msgstr "Kerberos 사용 가능 서비스가 사용자 ID를 사용하도록 허용" -#: src/lib/authui/ldapkrb/main_dialog.rb:425 +#: src/lib/authui/ldapkrb/main_dialog.rb:425 msgid "Issue Address-Less Tickets for Computers Behind NAT" msgstr "NAT 뒤의 컴퓨터에 대해 주소 없는 티켓 발급" -#. Entry point can be :sssd, :ldapkrb, or :auto -#. In auto mode, there will be two change settings buttons. -#: src/lib/authui/main_dialog.rb:46 +#. Entry point can be :sssd, :ldapkrb, or :auto +#. In auto mode, there will be two change settings buttons. +#: src/lib/authui/main_dialog.rb:46 msgid "LDAP and Kerberos Client" msgstr "LDAP 및 Kerberos 클라이언트" -#: src/lib/authui/main_dialog.rb:48 +#: src/lib/authui/main_dialog.rb:48 msgid "User Logon Management" msgstr "사용자 로그온 관리" -#: src/lib/authui/main_dialog.rb:63 +#: src/lib/authui/main_dialog.rb:63 msgid "Change Settings" msgstr "설정 변경" -#. Allow entering both SSSD and ldapkrb settings -#: src/lib/authui/main_dialog.rb:67 +#. Allow entering both SSSD and ldapkrb settings +#: src/lib/authui/main_dialog.rb:67 msgid "User Logon Configuration" msgstr "사용자 로그온 구성" -#: src/lib/authui/main_dialog.rb:68 +#: src/lib/authui/main_dialog.rb:68 msgid "LDAP/Kerberos Configuration" msgstr "LDAP/Kerberos 구성" -#. Let user choose one additional parameter to customise for domain. -#: src/lib/authui/main_dialog.rb:89 -#: src/lib/authui/sssd/extended_param_dialog.rb:54 -#: src/lib/authui/sssd/main_dialog.rb:177 -#: src/lib/authui/sssd/manage_ad_dialog.rb:99 +#. Let user choose one additional parameter to customise for domain. +#: src/lib/authui/main_dialog.rb:89 +#: src/lib/authui/sssd/extended_param_dialog.rb:54 +#: src/lib/authui/sssd/main_dialog.rb:177 +#: src/lib/authui/sssd/manage_ad_dialog.rb:99 msgid "Name" msgstr "이름" -#: src/lib/authui/main_dialog.rb:89 src/lib/authui/sssd/main_dialog.rb:177 -#: src/lib/authui/sssd/manage_ad_dialog.rb:99 +#: src/lib/authui/main_dialog.rb:89 src/lib/authui/sssd/main_dialog.rb:177 +#: src/lib/authui/sssd/manage_ad_dialog.rb:99 msgid "Value" msgstr "값" -#: src/lib/authui/main_dialog.rb:91 +#: src/lib/authui/main_dialog.rb:91 msgid "Computer Name" msgstr "컴퓨터 이름" -#: src/lib/authui/main_dialog.rb:92 +#: src/lib/authui/main_dialog.rb:92 msgid "Full Computer Name" msgstr "전체 컴퓨터 이름" -#: src/lib/authui/main_dialog.rb:92 src/lib/authui/main_dialog.rb:93 +#: src/lib/authui/main_dialog.rb:92 src/lib/authui/main_dialog.rb:93 msgid "(Name is not resolvable)" msgstr "(이름을 확인할 수 없음)" -#: src/lib/authui/main_dialog.rb:93 +#: src/lib/authui/main_dialog.rb:93 msgid "Network Domain" msgstr "네트워크 도메인" -#: src/lib/authui/main_dialog.rb:94 +#: src/lib/authui/main_dialog.rb:94 msgid "IP Addresses" msgstr "IP 주소" -#: src/lib/authui/main_dialog.rb:95 +#: src/lib/authui/main_dialog.rb:95 msgid "Identity Domains" msgstr "ID 도메인" -#: src/lib/authui/sssd/extended_param_dialog.rb:54 +#: src/lib/authui/sssd/extended_param_dialog.rb:54 msgid "Description" msgstr "설명" -#: src/lib/authui/sssd/extended_param_dialog.rb:65 +#: src/lib/authui/sssd/extended_param_dialog.rb:65 msgid "Extended options" msgstr "확장 옵션" -#: src/lib/authui/sssd/extended_param_dialog.rb:68 +#: src/lib/authui/sssd/extended_param_dialog.rb:68 msgid "Name filter:" msgstr "이름 필터:" -#. Create parameter editor controls (label, input, help text) and return them. -#: src/lib/authui/sssd/initial_customisation_dialog.rb:74 +#. Create parameter editor controls (label, input, help text) and return them. +#: src/lib/authui/sssd/initial_customisation_dialog.rb:74 msgid "None." msgstr "없습니다." -#. Render controls for editing parameter values, according to parameter data type. -#: src/lib/authui/sssd/initial_customisation_dialog.rb:109 +#. Render controls for editing parameter values, according to parameter data type. +#: src/lib/authui/sssd/initial_customisation_dialog.rb:109 msgid "Mandatory Parameters" msgstr "필수 파라미터" -#: src/lib/authui/sssd/initial_customisation_dialog.rb:116 +#: src/lib/authui/sssd/initial_customisation_dialog.rb:116 msgid "Optional Parameters" msgstr "선택 파라미터" -#. Check that all mandatory parameters are set -#: src/lib/authui/sssd/initial_customisation_dialog.rb:142 +#. Check that all mandatory parameters are set +#: src/lib/authui/sssd/initial_customisation_dialog.rb:142 msgid "Please complete all of the following mandatory parameters:\n" msgstr "다음의 필수 파라미터를 모두 완성하십시오.\n" -#. SSSD section name to UI caption mapping -#: src/lib/authui/sssd/main_dialog.rb:40 +#. SSSD section name to UI caption mapping +#: src/lib/authui/sssd/main_dialog.rb:40 msgid "Global Options" msgstr "전역 옵션" -#: src/lib/authui/sssd/main_dialog.rb:40 +#: src/lib/authui/sssd/main_dialog.rb:40 msgid "Name switch" msgstr "이름 전환" -#: src/lib/authui/sssd/main_dialog.rb:41 +#: src/lib/authui/sssd/main_dialog.rb:41 msgid "Authentication" msgstr "인증" -#: src/lib/authui/sssd/main_dialog.rb:41 +#: src/lib/authui/sssd/main_dialog.rb:41 msgid "Sudo" msgstr "Sudo" -#: src/lib/authui/sssd/main_dialog.rb:42 +#: src/lib/authui/sssd/main_dialog.rb:42 msgid "Auto-Mount" msgstr "자동 탑재" -#: src/lib/authui/sssd/main_dialog.rb:42 -#: src/lib/authui/sssd/main_dialog.rb:84 +#: src/lib/authui/sssd/main_dialog.rb:42 src/lib/authui/sssd/main_dialog.rb:84 msgid "SSH Public Keys" msgstr "SSH 공용 키" -#: src/lib/authui/sssd/main_dialog.rb:43 -#: src/lib/authui/sssd/main_dialog.rb:85 +#: src/lib/authui/sssd/main_dialog.rb:43 src/lib/authui/sssd/main_dialog.rb:85 msgid "Privilege Account Certificate (MS-PAC)" msgstr "권한 계정 인증서(MS-PAC)" -#. Render overview and edit buttons on left side, config editor on right side. -#: src/lib/authui/sssd/main_dialog.rb:67 +#. Render overview and edit buttons on left side, config editor on right side. +#: src/lib/authui/sssd/main_dialog.rb:67 msgid "Manage Domain User Logon" msgstr "도메인 사용자 로그온 관리" -#: src/lib/authui/sssd/main_dialog.rb:75 +#: src/lib/authui/sssd/main_dialog.rb:75 msgid "Daemon Status: " msgstr "데몬 상태: " -#: src/lib/authui/sssd/main_dialog.rb:75 +#: src/lib/authui/sssd/main_dialog.rb:75 msgid "Running" msgstr "실행 중" -#: src/lib/authui/sssd/main_dialog.rb:75 +#: src/lib/authui/sssd/main_dialog.rb:75 msgid "Stopped" msgstr "중지됨" -#: src/lib/authui/sssd/main_dialog.rb:76 +#: src/lib/authui/sssd/main_dialog.rb:76 msgid "Allow Domain User Logon" msgstr "도메인 사용자 로그온 허용" -#: src/lib/authui/sssd/main_dialog.rb:77 +#: src/lib/authui/sssd/main_dialog.rb:77 msgid "Create Home Directory" msgstr "홈 디렉토리 생성" -#: src/lib/authui/sssd/main_dialog.rb:79 +#: src/lib/authui/sssd/main_dialog.rb:79 msgid "Enable domain data source:" msgstr "도메인 데이터 원본 활성화:" -#: src/lib/authui/sssd/main_dialog.rb:83 +#: src/lib/authui/sssd/main_dialog.rb:83 msgid "Map Network Drives (automount)" msgstr "네트워크 드라이브 매핑(automount)" -#: src/lib/authui/sssd/main_dialog.rb:91 +#: src/lib/authui/sssd/main_dialog.rb:91 msgid "Join Domain" msgstr "도메인 가입" -#: src/lib/authui/sssd/main_dialog.rb:92 +#: src/lib/authui/sssd/main_dialog.rb:92 msgid "Leave Domain" msgstr "도메인에서 나가기" -#: src/lib/authui/sssd/main_dialog.rb:93 +#: src/lib/authui/sssd/main_dialog.rb:93 msgid "Clear Domain Cache" msgstr "도메인 캐시 지우기" -#. Render overview of all config sections in tree. -#. For the currently selection config section, render customised parameters and values in a table. -#: src/lib/authui/sssd/main_dialog.rb:138 -#: src/lib/authui/sssd/main_dialog.rb:150 +#. Render overview of all config sections in tree. +#. For the currently selection config section, render customised parameters and values in a table. +#: src/lib/authui/sssd/main_dialog.rb:138 +#: src/lib/authui/sssd/main_dialog.rb:150 msgid "Service Options" msgstr "서비스 옵션" -#: src/lib/authui/sssd/main_dialog.rb:139 -#: src/lib/authui/sssd/main_dialog.rb:150 +#: src/lib/authui/sssd/main_dialog.rb:139 +#: src/lib/authui/sssd/main_dialog.rb:150 msgid "Domain Options" msgstr "도메인 옵션" -#: src/lib/authui/sssd/main_dialog.rb:151 +#: src/lib/authui/sssd/main_dialog.rb:151 msgid "Select Global Options, a service, or a domain to customise." msgstr "사용자 정의할 전역 옵션, 서비스 또는 도메인을 선택하십시오." -#. Additional widgets for a domain -#: src/lib/authui/sssd/main_dialog.rb:157 +#. Additional widgets for a domain +#: src/lib/authui/sssd/main_dialog.rb:157 msgid "Use this domain" msgstr "이 도메인 사용" -#. Additiona widgets for an AD domain -#: src/lib/authui/sssd/main_dialog.rb:162 +#. Additiona widgets for an AD domain +#: src/lib/authui/sssd/main_dialog.rb:162 msgid "Enroll to Active Directory" msgstr "Active Directory에 등록" -#. TRANSLATORS: Label of the area used to customise parameters. -#. %s is the name of the section being customised. -#: src/lib/authui/sssd/main_dialog.rb:172 +#. TRANSLATORS: Label of the area used to customise parameters. +#. %s is the name of the section being customised. +#: src/lib/authui/sssd/main_dialog.rb:172 msgid "Options - %s" msgstr "옵션 - %s" -#. Delete the chosen domain -#: src/lib/authui/sssd/main_dialog.rb:217 +#. Delete the chosen domain +#: src/lib/authui/sssd/main_dialog.rb:217 msgid "Please select a domain among the list." msgstr "목록에서 도메인을 선택하십시오." -#: src/lib/authui/sssd/main_dialog.rb:220 +#: src/lib/authui/sssd/main_dialog.rb:220 msgid "Do you really wish to erase configuration for domain %s?" msgstr "%s 도메인에 대한 구성을 지우시겠습니까?" -#. Enable/disable SSSD daemon -#: src/lib/authui/sssd/main_dialog.rb:253 +#. Enable/disable SSSD daemon +#: src/lib/authui/sssd/main_dialog.rb:253 msgid "" -"This computer is currently using legacy LDAP or Kerberos method to " -"authenticate users.\n" -"Before you may use SSSD to authenticate users, please disable LDAP and " -"Kerberos authentication from \"LDAP and Kerberos Client\"." +"This computer is currently using legacy LDAP or Kerberos method to authenticate users.\n" +"Before you may use SSSD to authenticate users, please disable LDAP and Kerberos authentication from \"LDAP and Kerberos Client\"." msgstr "" -"이 컴퓨터는 현재 레거시 LDAP 또는 Kerberos 방법을 사용하여 사용자를 인증합니" -"다.\n" -"SSSD를 사용하여 사용자를 인증하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 " -"LDAP 및 Kerberos 인증을 비활성화하십시오." +"이 컴퓨터는 현재 레거시 LDAP 또는 Kerberos 방법을 사용하여 사용자를 인증합니다.\n" +"SSSD를 사용하여 사용자를 인증하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 LDAP 및 Kerberos 인증을 비활성화하십시오." -#. Enable/disable NSS password database -#: src/lib/authui/sssd/main_dialog.rb:285 +#. Enable/disable NSS password database +#: src/lib/authui/sssd/main_dialog.rb:285 msgid "" -"This computer is currently reading user database from LDAP identity " -"provider.\n" -"Before you may use SSSD user database, please disable LDAP user database " -"from \"LDAP and Kerberos Client\"." +"This computer is currently reading user database from LDAP identity provider.\n" +"Before you may use SSSD user database, please disable LDAP user database from \"LDAP and Kerberos Client\"." msgstr "" "이 컴퓨터는 현재 LDAP ID 공급자에서 사용자 데이터베이스를 읽습니다.\n" -"SSSD 사용자 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에" -"서 LDAP 사용자 데이터베이스를 비활성화하십시오." +"SSSD 사용자 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 LDAP 사용자 데이터베이스를 비활성화하십시오." -#. Enable/disable NSS group database -#: src/lib/authui/sssd/main_dialog.rb:303 +#. Enable/disable NSS group database +#: src/lib/authui/sssd/main_dialog.rb:303 msgid "" -"This computer is currently reading group database from LDAP identity " -"provider.\n" -"Before you may use SSSD group database, please disable LDAP group database " -"from \"LDAP and Kerberos Client\"." +"This computer is currently reading group database from LDAP identity provider.\n" +"Before you may use SSSD group database, please disable LDAP group database from \"LDAP and Kerberos Client\"." msgstr "" "이 컴퓨터는 현재 LDAP ID 공급자에서 그룹 데이터베이스를 읽습니다.\n" -"SSSD 그룹 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 " -"LDAP 그룹 데이터베이스를 비활성화하십시오." +"SSSD 그룹 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 LDAP 그룹 데이터베이스를 비활성화하십시오." -#. Enable/disable NSS sudoers database -#: src/lib/authui/sssd/main_dialog.rb:321 +#. Enable/disable NSS sudoers database +#: src/lib/authui/sssd/main_dialog.rb:321 msgid "" -"This computer is currently reading sudoers database from LDAP identity " -"provider.\n" -"Before you may use SSSD sudoers database, please disable LDAP sudoers " -"database from \"LDAP and Kerberos Client\"." +"This computer is currently reading sudoers database from LDAP identity provider.\n" +"Before you may use SSSD sudoers database, please disable LDAP sudoers database from \"LDAP and Kerberos Client\"." msgstr "" "이 컴퓨터는 현재 LDAP ID 공급자에서 sudoers 데이터베이스를 읽습니다.\n" -"SSSD sudoers 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에" -"서 LDAP sudoers 데이터베이스를 비활성화하십시오." +"SSSD sudoers 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 LDAP sudoers 데이터베이스를 비활성화하십시오." -#: src/lib/authui/sssd/main_dialog.rb:329 +#: src/lib/authui/sssd/main_dialog.rb:329 msgid "" "Sudo data source has been globally enabled.\n" -"Please remember to also customise \"sudo_provider\" parameter in Extended " -"Options of each individual domain that provides sudo data." +"Please remember to also customise \"sudo_provider\" parameter in Extended Options of each individual domain that provides sudo data." msgstr "" "Sudo 데이터 원본이 전체적으로 활성화되었습니다.\n" -"Sudo 데이터를 제공하는 개별 도메인에 대해 [확장 옵션]에서 \"sudo_provider\" " -"파라미터도 사용자 정의해야 합니다." +"Sudo 데이터를 제공하는 개별 도메인에 대해 [확장 옵션]에서 \"sudo_provider\" 파라미터도 사용자 정의해야 합니다." -#. Enable/disable NSS automount database -#: src/lib/authui/sssd/main_dialog.rb:343 +#. Enable/disable NSS automount database +#: src/lib/authui/sssd/main_dialog.rb:343 msgid "" -"This computer is currently reading automount database from LDAP identity " -"provider.\n" -"Before you may use SSSD automount database, please disable LDAP automount " -"database from \"LDAP and Kerberos Client\"." +"This computer is currently reading automount database from LDAP identity provider.\n" +"Before you may use SSSD automount database, please disable LDAP automount database from \"LDAP and Kerberos Client\"." msgstr "" "이 컴퓨터는 현재 LDAP ID 공급자에서 automount 데이터베이스를 읽습니다.\n" -"SSSD automount 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트" -"\"에서 LDAP automount 데이터베이스를 비활성화하십시오." +"SSSD automount 데이터베이스를 사용하려면 먼저 \"LDAP 및 Kerberos 클라이언트\"에서 LDAP automount 데이터베이스를 비활성화하십시오." -#: src/lib/authui/sssd/main_dialog.rb:351 +#: src/lib/authui/sssd/main_dialog.rb:351 msgid "" "Automount data source has been globally enabled.\n" -"Please remember to also customise \"autofs_provider\" parameter in Extended " -"Options of each individual domain that provides automount data." +"Please remember to also customise \"autofs_provider\" parameter in Extended Options of each individual domain that provides automount data." msgstr "" "Automount 데이터 원본이 전체적으로 활성화되었습니다.\n" -"Automount 데이터를 제공하는 개별 도메인에 대해 [확장 옵션]에서 " -"\"autofs_provider\" 파라미터도 사용자 정의해야 합니다." +"Automount 데이터를 제공하는 개별 도메인에 대해 [확장 옵션]에서 \"autofs_provider\" 파라미터도 사용자 정의해야 합니다." -#. Enable/disable PAC responder -#: src/lib/authui/sssd/main_dialog.rb:375 +#. Enable/disable PAC responder +#: src/lib/authui/sssd/main_dialog.rb:375 msgid "" "MS-PAC data source has been globally enabled.\n" -"This optional feature depends on the capabilities of your Microsoft Active " -"Directory domain.\n" -"SSSD may fail to start if Active Directory domain lacks the support, in " -"which case please turn off this feature." +"This optional feature depends on the capabilities of your Microsoft Active Directory domain.\n" +"SSSD may fail to start if Active Directory domain lacks the support, in which case please turn off this feature." msgstr "" "MS-PAC 데이터 원본이 전체적으로 활성화되었습니다.\n" "이 선택적 기능은 Microsoft Active Directory 도메인의 기능에 의존합니다.\n" -"Active Directory 도메인에서 지원하지 않는 경우 SSSD를 시작하지 못할 수 있습니" -"다. 이 경우 이 기능을 끄십시오." +"Active Directory 도메인에서 지원하지 않는 경우 SSSD를 시작하지 못할 수 있습니다. 이 경우 이 기능을 끄십시오." -#. Forbid removal of mandatory parameters -#: src/lib/authui/sssd/main_dialog.rb:410 +#. Forbid removal of mandatory parameters +#: src/lib/authui/sssd/main_dialog.rb:410 msgid "This is a mandatory parameter and it may not be deleted." msgstr "필수 파라미터이므로 삭제할 수 없습니다." -#. Warn against removal of important parameters -#: src/lib/authui/sssd/main_dialog.rb:415 +#. Warn against removal of important parameters +#: src/lib/authui/sssd/main_dialog.rb:415 msgid "Confirm parameter removal: " msgstr "파라미터 삭제 확인: " -#: src/lib/authui/sssd/main_dialog.rb:416 +#: src/lib/authui/sssd/main_dialog.rb:416 msgid "" -"The parameter is important. Removal of the parameter may cause configuration " -"failure.\n" +"The parameter is important. Removal of the parameter may cause configuration failure.\n" "Please consult SSSD manual page before moving on.\n" "Do you still wish to remove the parameter?" msgstr "" -"중요한 파라미터입니다. 이 파라미터를 삭제하면 구성 오류가 발생할 수 있습니" -"다.\n" +"중요한 파라미터입니다. 이 파라미터를 삭제하면 구성 오류가 발생할 수 있습니다.\n" "계속하기 전에 SSSD 맨페이지를 참조하십시오.\n" "파라미터를 제거하시겠습니까?" -#. Save settings - validate -#: src/lib/authui/sssd/main_dialog.rb:435 +#. Save settings - validate +#: src/lib/authui/sssd/main_dialog.rb:435 msgid "No domain" msgstr "도메인 없음" -#: src/lib/authui/sssd/main_dialog.rb:436 +#: src/lib/authui/sssd/main_dialog.rb:436 msgid "" -"You have not configured any authentication domain, yet you chose to enable " -"domain authentication.\n" +"You have not configured any authentication domain, yet you chose to enable domain authentication.\n" "SSSD will fail to start, and only local authentication will be available.\n" "Do you still wish to proceed?" msgstr "" @@ -839,99 +778,89 @@ "SSSD가 시작되지 않으며 로컬 인증만 사용할 수 있습니다.\n" "계속하시겠습니까?" -#. Remove all SSSD cache files -#: src/lib/authui/sssd/main_dialog.rb:456 +#. Remove all SSSD cache files +#: src/lib/authui/sssd/main_dialog.rb:456 msgid "All cached data have been erased." msgstr "캐시된 데이터가 모두 지워졌습니다." -#. The frame is shown only if AD server can be discovered or is explicitly specified -#. The frame is hidden if the module is not running in autoyast mode and AD server is not found/specified -#: src/lib/authui/sssd/manage_ad_dialog.rb:68 -msgid "" -"Enter AD user credentials (e.g. Administrator) to enroll or re-enroll this " -"computer:" -msgstr "" -"이 컴퓨터를 등록 또는 다시 등록하려면 AD 사용자 인증서(예: 관리자)를 입력하십" -"시오." +#. The frame is shown only if AD server can be discovered or is explicitly specified +#. The frame is hidden if the module is not running in autoyast mode and AD server is not found/specified +#: src/lib/authui/sssd/manage_ad_dialog.rb:68 +msgid "Enter AD user credentials (e.g. Administrator) to enroll or re-enroll this computer:" +msgstr "이 컴퓨터를 등록 또는 다시 등록하려면 AD 사용자 인증서(예: 관리자)를 입력하십시오." -#: src/lib/authui/sssd/manage_ad_dialog.rb:69 +#: src/lib/authui/sssd/manage_ad_dialog.rb:69 msgid "Username" msgstr "사용자 이름" -#: src/lib/authui/sssd/manage_ad_dialog.rb:70 +#: src/lib/authui/sssd/manage_ad_dialog.rb:70 msgid "Password" msgstr "비밀번호" -#: src/lib/authui/sssd/manage_ad_dialog.rb:71 +#: src/lib/authui/sssd/manage_ad_dialog.rb:71 msgid "Update AD's DNS records as well" msgstr "AD의 DNS 레코드도 업데이트" -#: src/lib/authui/sssd/manage_ad_dialog.rb:72 +#: src/lib/authui/sssd/manage_ad_dialog.rb:72 msgid "Optional Organisation Unit such as \"Headquarter/HR/BuildingA\"" msgstr "선택적 조직 단위(예: \"Headquarter/HR/BuildingA\")" -#: src/lib/authui/sssd/manage_ad_dialog.rb:73 +#: src/lib/authui/sssd/manage_ad_dialog.rb:73 msgid "Overwrite Samba configuration to work with this AD" msgstr "이 AD에서 작동할 Samba 구성 덮어쓰기" -#: src/lib/authui/sssd/manage_ad_dialog.rb:77 -#: src/lib/authui/sssd/manage_ad_dialog.rb:87 +#: src/lib/authui/sssd/manage_ad_dialog.rb:77 +#: src/lib/authui/sssd/manage_ad_dialog.rb:87 msgid "(Not applicable in AutoYast editor)" msgstr "(AutoYast 편집기에서 적용 안 됨)" -#: src/lib/authui/sssd/manage_ad_dialog.rb:79 +#: src/lib/authui/sssd/manage_ad_dialog.rb:79 msgid " (Auto-discovered via DNS)" msgstr " (DNS를 통해 자동 검색됨)" -#: src/lib/authui/sssd/manage_ad_dialog.rb:83 +#: src/lib/authui/sssd/manage_ad_dialog.rb:83 msgid "(DNS error)" msgstr "(DNS 오류)" -#: src/lib/authui/sssd/manage_ad_dialog.rb:84 +#: src/lib/authui/sssd/manage_ad_dialog.rb:84 msgid "" -"The name resolution service on this computer does not satisfy AD enrollment " -"requirements.\n" -"Please configure your network environment to use AD server as the name " -"resolver." +"The name resolution service on this computer does not satisfy AD enrollment requirements.\n" +"Please configure your network environment to use AD server as the name resolver." msgstr "" "이 컴퓨터의 이름 확인 서비스가 AD 등록 요구사항을 충족하지 않습니다.\n" "AD 서버를 이름 확인자로 사용하도록 네트워크 환경을 구성하십시오." -#: src/lib/authui/sssd/manage_ad_dialog.rb:90 +#: src/lib/authui/sssd/manage_ad_dialog.rb:90 msgid "Already enrolled" msgstr "이미 등록되었습니다." -#: src/lib/authui/sssd/manage_ad_dialog.rb:92 +#: src/lib/authui/sssd/manage_ad_dialog.rb:92 msgid "Not yet enrolled" msgstr "아직 등록되지 않았습니다." -#: src/lib/authui/sssd/manage_ad_dialog.rb:115 +#: src/lib/authui/sssd/manage_ad_dialog.rb:115 msgid "Active Directory enrollment" msgstr "Active Directory 등록" -#: src/lib/authui/sssd/manage_ad_dialog.rb:117 +#: src/lib/authui/sssd/manage_ad_dialog.rb:117 msgid "Current status" msgstr "현재 상태" -#: src/lib/authui/sssd/manage_ad_dialog.rb:117 +#: src/lib/authui/sssd/manage_ad_dialog.rb:117 msgid "Gathering status..." msgstr "상태를 수집하는 중..." -#. Enroll the computer, or save the enrollment details -#: src/lib/authui/sssd/manage_ad_dialog.rb:135 +#. Enroll the computer, or save the enrollment details +#: src/lib/authui/sssd/manage_ad_dialog.rb:135 msgid "Please enter both username and password." msgstr "사용자 이름과 비밀번호를 모두 입력하십시오." -#. join_ad will configure and apply Kerberos and then join AD -#: src/lib/authui/sssd/manage_ad_dialog.rb:146 -msgid "" -"AD enrollment details have been saved for AutoYast. Please keep in mind that " -"AD user password is saved in plain text." -msgstr "" -"AutoYast에 대한 AD 등록 세부사항이 저장되었습니다. AD 사용자 비밀번호는 일반 " -"텍스트로 저장됩니다." +#. join_ad will configure and apply Kerberos and then join AD +#: src/lib/authui/sssd/manage_ad_dialog.rb:146 +msgid "AD enrollment details have been saved for AutoYast. Please keep in mind that AD user password is saved in plain text." +msgstr "AutoYast에 대한 AD 등록 세부사항이 저장되었습니다. AD 사용자 비밀번호는 일반 텍스트로 저장됩니다." -#: src/lib/authui/sssd/manage_ad_dialog.rb:152 +#: src/lib/authui/sssd/manage_ad_dialog.rb:152 msgid "" "Enrollment has completed successfully!\n" "\n" @@ -941,8 +870,8 @@ "\n" "명령 출력:\n" -#. If user enters this dialog once again, the details should be cleared. -#: src/lib/authui/sssd/manage_ad_dialog.rb:160 +#. If user enters this dialog once again, the details should be cleared. +#: src/lib/authui/sssd/manage_ad_dialog.rb:160 msgid "" "The enrollment process failed.\n" "\n" @@ -952,1420 +881,959 @@ "\n" "명령 출력:\n" -#. ID provider to UI caption mapping and reversed mapping -#: src/lib/authui/sssd/new_section_dialog.rb:37 -#: src/lib/authui/sssd/new_section_dialog.rb:50 +#. ID provider to UI caption mapping and reversed mapping +#: src/lib/authui/sssd/new_section_dialog.rb:37 +#: src/lib/authui/sssd/new_section_dialog.rb:50 msgid "Delegate to third-party software library (proxy_lib_name)" msgstr "타사 소프트웨어 라이브러리에 위임(proxy_lib_name)" -#: src/lib/authui/sssd/new_section_dialog.rb:38 -#: src/lib/authui/sssd/new_section_dialog.rb:51 +#: src/lib/authui/sssd/new_section_dialog.rb:38 +#: src/lib/authui/sssd/new_section_dialog.rb:51 msgid "Local SSSD file database" msgstr "로컬 SSSD 파일 데이터베이스" -#: src/lib/authui/sssd/new_section_dialog.rb:39 -#: src/lib/authui/sssd/new_section_dialog.rb:49 +#: src/lib/authui/sssd/new_section_dialog.rb:39 +#: src/lib/authui/sssd/new_section_dialog.rb:49 msgid "Microsoft Active Directory" msgstr "Microsoft Active Directory" -#: src/lib/authui/sssd/new_section_dialog.rb:40 -#: src/lib/authui/sssd/new_section_dialog.rb:48 +#: src/lib/authui/sssd/new_section_dialog.rb:40 +#: src/lib/authui/sssd/new_section_dialog.rb:48 msgid "FreeIPA" msgstr "FreeIPA" -#: src/lib/authui/sssd/new_section_dialog.rb:41 -#: src/lib/authui/sssd/new_section_dialog.rb:46 +#: src/lib/authui/sssd/new_section_dialog.rb:41 +#: src/lib/authui/sssd/new_section_dialog.rb:46 msgid "Generic directory service (LDAP)" msgstr "일반 디렉토리 서비스(LDAP)" -#: src/lib/authui/sssd/new_section_dialog.rb:47 +#: src/lib/authui/sssd/new_section_dialog.rb:47 msgid "Generic Kerberos service" msgstr "일반 Kerberos 서비스" -#: src/lib/authui/sssd/new_section_dialog.rb:52 +#: src/lib/authui/sssd/new_section_dialog.rb:52 msgid "The domain does not provide authentication service" msgstr "도메인에서 인증 서비스를 제공하지 않습니다." -#. New domain and provider types -#: src/lib/authui/sssd/new_section_dialog.rb:75 +#. New domain and provider types +#: src/lib/authui/sssd/new_section_dialog.rb:75 msgid "Domain name (such as example.com):" msgstr "도메인 이름(예: example.com):" -#: src/lib/authui/sssd/new_section_dialog.rb:78 -msgid "" -"Which service provides identity data, such as user names and group " -"memberships?" -msgstr "" -"사용자 이름 및 그룹 구성원과 같은 ID 데이터를 제공하는 서비스는 무엇입니까?" +#: src/lib/authui/sssd/new_section_dialog.rb:78 +msgid "Which service provides identity data, such as user names and group memberships?" +msgstr "사용자 이름 및 그룹 구성원과 같은 ID 데이터를 제공하는 서비스는 무엇입니까?" -#: src/lib/authui/sssd/new_section_dialog.rb:83 +#: src/lib/authui/sssd/new_section_dialog.rb:83 msgid "Which service handles user authentication?" msgstr "사용자 인증을 처리하는 서비스는 무엇입니까?" -#: src/lib/authui/sssd/new_section_dialog.rb:86 +#: src/lib/authui/sssd/new_section_dialog.rb:86 msgid "Enable the domain" msgstr "도메인 활성화" -#. Create new domain -#: src/lib/authui/sssd/new_section_dialog.rb:106 +#. Create new domain +#: src/lib/authui/sssd/new_section_dialog.rb:106 msgid "Please enter the domain name." msgstr "도메인 이름을 입력하십시오." -#: src/lib/authui/sssd/new_section_dialog.rb:109 -msgid "" -"The domain name collides with a reserved keyword. Please choose a different " -"name." +#: src/lib/authui/sssd/new_section_dialog.rb:109 +msgid "The domain name collides with a reserved keyword. Please choose a different name." msgstr "도메인 이름이 예약된 키워드와 충돌합니다. 다른 이름을 선택하십시오." -#: src/lib/authui/sssd/new_section_dialog.rb:112 +#: src/lib/authui/sssd/new_section_dialog.rb:112 msgid "The domain name is already in-use." msgstr "이미 사용 중인 도메인 이름입니다." -#. Define Global Parameters -#. Omit 'services' and 'domains' from section [sssd], because they are never customised directly by the end-user. -#: src/lib/authui/sssd/params.rb:110 +#. Define Global Parameters +#. Omit 'services' and 'domains' from section [sssd], because they are never customised directly by the end-user. +#: src/lib/authui/sssd/params.rb:110 msgid "Version of configuration file syntax (1 or 2)" msgstr "구성 파일 구문의 버전(1 또는 2)" -#: src/lib/authui/sssd/params.rb:115 src/lib/authui/sssd/params.rb:166 -msgid "" -"Number of times services should attempt to reconnect in the event of a Data " -"Provider crash or restart before they give up" -msgstr "" -"데이터 공급자 크래시 또는 다시 시작이 발생할 경우 서비스에서 포기하기 전에 다" -"시 연결하려고 시도하는 횟수" +#: src/lib/authui/sssd/params.rb:115 src/lib/authui/sssd/params.rb:166 +msgid "Number of times services should attempt to reconnect in the event of a Data Provider crash or restart before they give up" +msgstr "데이터 공급자 크래시 또는 다시 시작이 발생할 경우 서비스에서 포기하기 전에 다시 연결하려고 시도하는 횟수" -#: src/lib/authui/sssd/params.rb:119 +#: src/lib/authui/sssd/params.rb:119 msgid "The regular expression parses user name and domain name into components" msgstr "정규식은 사용자 이름 및 도메인 이름을 구성요소로 구문 분석합니다." -#: src/lib/authui/sssd/params.rb:123 -msgid "" -"The default printf(3)-compatible format that describes translation of a name/" -"domain tuple into FQDN" -msgstr "" -"이름/도메인 튜플을 FQDN으로 변환하는 방법을 설명하는 기본 printf(3) 호환 형식" +#: src/lib/authui/sssd/params.rb:123 +msgid "The default printf(3)-compatible format that describes translation of a name/domain tuple into FQDN" +msgstr "이름/도메인 튜플을 FQDN으로 변환하는 방법을 설명하는 기본 printf(3) 호환 형식" -#: src/lib/authui/sssd/params.rb:127 -msgid "" -"Whether or not to use inotify mechanism to monitor resolv.conf to update " -"internal DNS resolver" -msgstr "" -"Inotify 메커니즘을 사용하여 resolv.conf를 모니터링하여 내부 DNS 확인자를 업데" -"이트할지 여부" +#: src/lib/authui/sssd/params.rb:127 +msgid "Whether or not to use inotify mechanism to monitor resolv.conf to update internal DNS resolver" +msgstr "Inotify 메커니즘을 사용하여 resolv.conf를 모니터링하여 내부 DNS 확인자를 업데이트할지 여부" -#: src/lib/authui/sssd/params.rb:131 -msgid "" -"Directory on the filesystem where SSSD should store Kerberos replay cache " -"files" +#: src/lib/authui/sssd/params.rb:131 +msgid "Directory on the filesystem where SSSD should store Kerberos replay cache files" msgstr "SSSD에서 Kerberos 재생 캐시 파일을 저장할 파일 시스템의 디렉토리" -#: src/lib/authui/sssd/params.rb:135 +#: src/lib/authui/sssd/params.rb:135 msgid "A default domain name for all names without a domian name component" msgstr "도메인 이름 구성요소가 없는 모든 이름의 기본 도메인 이름" -#. Define Global Services Parameters -#. NSS configuration options -#. PAM configuration options -#. SUDO configuration options -#. AUTOFS configuration options -#. SSH configuration options -#. DOMAIN SECTIONS -#. These configuration options can be present in a domain configuration section, that is, in a section called “[domain/NAME]” -#: src/lib/authui/sssd/params.rb:139 src/lib/authui/sssd/params.rb:146 -#: src/lib/authui/sssd/params.rb:188 src/lib/authui/sssd/params.rb:266 -#: src/lib/authui/sssd/params.rb:308 src/lib/authui/sssd/params.rb:320 -#: src/lib/authui/sssd/params.rb:332 src/lib/authui/sssd/params.rb:350 -msgid "" -"Level of details for logging. Can be numeric (0-9) or a big mask such as " -"0x0010 (lowest level) or 0xFFF (highest level)" -msgstr "" -"기록에 대한 세부 사항 수준입니다. 숫자(0-9)나 0x0010(가장 낮은 수준) 또는 " -"0xFFF(가장 높은 수준)와 같은 비트 마스크일 수 있습니다." +#. Define Global Services Parameters +#. NSS configuration options +#. PAM configuration options +#. SUDO configuration options +#. AUTOFS configuration options +#. SSH configuration options +#. DOMAIN SECTIONS +#. These configuration options can be present in a domain configuration section, that is, in a section called “[domain/NAME]” +#: src/lib/authui/sssd/params.rb:139 src/lib/authui/sssd/params.rb:146 +#: src/lib/authui/sssd/params.rb:188 src/lib/authui/sssd/params.rb:266 +#: src/lib/authui/sssd/params.rb:308 src/lib/authui/sssd/params.rb:320 +#: src/lib/authui/sssd/params.rb:332 src/lib/authui/sssd/params.rb:350 +msgid "Level of details for logging. Can be numeric (0-9) or a big mask such as 0x0010 (lowest level) or 0xFFF (highest level)" +msgstr "기록에 대한 세부 사항 수준입니다. 숫자(0-9)나 0x0010(가장 낮은 수준) 또는 0xFFF(가장 높은 수준)와 같은 비트 마스크일 수 있습니다." -#: src/lib/authui/sssd/params.rb:151 +#: src/lib/authui/sssd/params.rb:151 msgid "Add a timestamp to the debug messages" msgstr "디버그 메시지에 타임스탬프 추가" -#: src/lib/authui/sssd/params.rb:156 +#: src/lib/authui/sssd/params.rb:156 msgid "Add microseconds to the timestamp in debug messages" msgstr "디버그 메시지의 타임스탬프에 마이크로초 추가" -#: src/lib/authui/sssd/params.rb:161 +#: src/lib/authui/sssd/params.rb:161 msgid "Timeout in seconds between heartbeats for this service" msgstr "이 서비스에 대한 하트비트 사이의 제한 시간(초)" -#: src/lib/authui/sssd/params.rb:171 -msgid "" -"Maximum number of file descriptors that may be opened at a time by SSSD " -"service process" +#: src/lib/authui/sssd/params.rb:171 +msgid "Maximum number of file descriptors that may be opened at a time by SSSD service process" msgstr "SSSD 서비스 프로세스에서 한 번에 열 수 있는 최대 파일 설명자 수" -#: src/lib/authui/sssd/params.rb:176 -msgid "" -"Number of seconds a client of SSSD process can hold onto a file descriptor " -"without any communication" -msgstr "" -"SSSD 프로세스의 클라이언트가 통신하지 않고 파일 설명자에 보류할 수 있는 시간" -"(초)" +#: src/lib/authui/sssd/params.rb:176 +msgid "Number of seconds a client of SSSD process can hold onto a file descriptor without any communication" +msgstr "SSSD 프로세스의 클라이언트가 통신하지 않고 파일 설명자에 보류할 수 있는 시간(초)" -#: src/lib/authui/sssd/params.rb:181 -msgid "" -"The service will receive SIGTERM after this number of seconds of consecutive " -"ping check failure" -msgstr "" -"이 시간(초) 동안 핑 검사가 연속해서 실패하면 서비스가 SIGTERM을 수신합니다." +#: src/lib/authui/sssd/params.rb:181 +msgid "The service will receive SIGTERM after this number of seconds of consecutive ping check failure" +msgstr "이 시간(초) 동안 핑 검사가 연속해서 실패하면 서비스가 SIGTERM을 수신합니다." -#: src/lib/authui/sssd/params.rb:193 -msgid "" -"How many seconds should cache nss_sss enumerations (requests for info about " -"all users)?" +#: src/lib/authui/sssd/params.rb:193 +msgid "How many seconds should cache nss_sss enumerations (requests for info about all users)?" msgstr "nss_sss 열거(모든 사용자에 대한 정보 요청)를 캐시해야 하는 시간(초)" -#: src/lib/authui/sssd/params.rb:198 -msgid "" -"The entry cache can be set to automatically update entries in the background " -"if they are requested beyond a percentage of the entry_cache_timeout value " -"for the domain." -msgstr "" -"도메인에 대한 entry_cache_timeout 값 백분율을 초과해서 요청될 경우 백그라운드" -"에서 항목을 자동으로 업데이트하도록 항목 캐시를 설정할 수 있습니다." +#: src/lib/authui/sssd/params.rb:198 +msgid "The entry cache can be set to automatically update entries in the background if they are requested beyond a percentage of the entry_cache_timeout value for the domain." +msgstr "도메인에 대한 entry_cache_timeout 값 백분율을 초과해서 요청될 경우 백그라운드에서 항목을 자동으로 업데이트하도록 항목 캐시를 설정할 수 있습니다." -#: src/lib/authui/sssd/params.rb:203 -msgid "" -"Specifies for how many seconds nss_sss should cache negative cache hits " -"(that is, queries for invalid database entries, like nonexistent ones) " -"before asking the back end again." -msgstr "" -"nss_sss에서 백 엔드에 다시 확인하기 전에 부정 캐시 적중(즉, 존재하지 않는 항" -"목 등의 잘못된 데이터베이스 항목 쿼리)을 캐시해야 하는 시간(초)을 지정합니다." +#: src/lib/authui/sssd/params.rb:203 +msgid "Specifies for how many seconds nss_sss should cache negative cache hits (that is, queries for invalid database entries, like nonexistent ones) before asking the back end again." +msgstr "nss_sss에서 백 엔드에 다시 확인하기 전에 부정 캐시 적중(즉, 존재하지 않는 항목 등의 잘못된 데이터베이스 항목 쿼리)을 캐시해야 하는 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:209 +#: src/lib/authui/sssd/params.rb:209 msgid "Exclude certain users from being fetched by SSS backend" msgstr "SSS 백엔드에서 가져오는 특정 사용자를 제외" -#: src/lib/authui/sssd/params.rb:215 +#: src/lib/authui/sssd/params.rb:215 msgid "Exclude certain groups from being fetched by SSS backend" msgstr "SSS 백엔드에서 가져오는 특정 그룹을 제외" -#: src/lib/authui/sssd/params.rb:220 -msgid "" -"If you want filtered user to still be group members set this option to false." -msgstr "" -"필터링된 사용자를 그룹 구성원으로 유지하려는 경우 이 옵션을 false로 설정하십" -"시오." +#: src/lib/authui/sssd/params.rb:220 +msgid "If you want filtered user to still be group members set this option to false." +msgstr "필터링된 사용자를 그룹 구성원으로 유지하려는 경우 이 옵션을 false로 설정하십시오." -#: src/lib/authui/sssd/params.rb:224 src/lib/authui/sssd/params.rb:510 -msgid "" -"Override the user's home directory. You can either provide an absolute value " -"or a template." -msgstr "" -"사용자의 홈 디렉토리를 무효화합니다. 절대값이나 템플릿을 제공할 수 있습니다." +#: src/lib/authui/sssd/params.rb:224 src/lib/authui/sssd/params.rb:510 +msgid "Override the user's home directory. You can either provide an absolute value or a template." +msgstr "사용자의 홈 디렉토리를 무효화합니다. 절대값이나 템플릿을 제공할 수 있습니다." -#: src/lib/authui/sssd/params.rb:228 src/lib/authui/sssd/params.rb:1251 -msgid "" -"Set a default template for a user's home directory if one is not specified " -"explicitly by the domain's data provider." -msgstr "" -"도메인의 데이터 공급자가 명시적으로 지정하지 않은 경우 사용자의 홈 디렉토리" -"에 대한 기본 템플릿을 설정합니다." +#: src/lib/authui/sssd/params.rb:228 src/lib/authui/sssd/params.rb:1251 +msgid "Set a default template for a user's home directory if one is not specified explicitly by the domain's data provider." +msgstr "도메인의 데이터 공급자가 명시적으로 지정하지 않은 경우 사용자의 홈 디렉토리에 대한 기본 템플릿을 설정합니다." -#: src/lib/authui/sssd/params.rb:232 +#: src/lib/authui/sssd/params.rb:232 msgid "Override the login shell for all users." msgstr "모든 사용자에 대해 로그인 셸을 무효화합니다." -#: src/lib/authui/sssd/params.rb:236 +#: src/lib/authui/sssd/params.rb:236 msgid "Restrict user shell to one of the listed values." msgstr "사용자 셸을 나열된 값 중 하나로 제한합니다." -#: src/lib/authui/sssd/params.rb:240 +#: src/lib/authui/sssd/params.rb:240 msgid "Replace any instance of these shells with the shell_fallback" msgstr "이러한 셸 인스턴스를 shell_fallback으로 대체" -#: src/lib/authui/sssd/params.rb:245 -msgid "" -"The default shell to use if an allowed shell is not installed on the machine." +#: src/lib/authui/sssd/params.rb:245 +msgid "The default shell to use if an allowed shell is not installed on the machine." msgstr "허용된 셸이 컴퓨터에 설치되어 있지 않은 경우 사용할 기본 셸입니다." -#: src/lib/authui/sssd/params.rb:249 src/lib/authui/sssd/params.rb:1255 -msgid "" -"The default shell to use if the provider does not return one during lookup." +#: src/lib/authui/sssd/params.rb:249 src/lib/authui/sssd/params.rb:1255 +msgid "The default shell to use if the provider does not return one during lookup." msgstr "조회 중 공급자가 셸을 반환하지 않을 경우 사용할 기본 셸입니다." -#: src/lib/authui/sssd/params.rb:254 src/lib/authui/sssd/params.rb:301 -msgid "" -"Specifies time in seconds for which the list of subdomains will be " -"considered valid." +#: src/lib/authui/sssd/params.rb:254 src/lib/authui/sssd/params.rb:301 +msgid "Specifies time in seconds for which the list of subdomains will be considered valid." msgstr "하위 도메인 목록이 유효한 것으로 간주되는 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:259 -msgid "" -"Specifies time in seconds for which records in the in-memory cache will be " -"valid." +#: src/lib/authui/sssd/params.rb:259 +msgid "Specifies time in seconds for which records in the in-memory cache will be valid." msgstr "메모리 내 캐시의 레코드가 유효한 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:271 -msgid "" -"If the authentication provider is offline, how long we should allow cached " -"logins (in days since the last successful online login)." -msgstr "" -"인증 공급자가 오프라인 상태인 경우 캐시된 로그인을 허용할 기간(마지막으로 성" -"공한 온라인 로그인 이후 일수)입니다." +#: src/lib/authui/sssd/params.rb:271 +msgid "If the authentication provider is offline, how long we should allow cached logins (in days since the last successful online login)." +msgstr "인증 공급자가 오프라인 상태인 경우 캐시된 로그인을 허용할 기간(마지막으로 성공한 온라인 로그인 이후 일수)입니다." -#: src/lib/authui/sssd/params.rb:276 src/lib/authui/sssd/params.rb:281 -msgid "" -"The time in minutes which has to pass after offline_failed_login_attempts " -"has been reached before a new login attempt is possible." -msgstr "" -"offline_failed_login_attempts에 도달한 후 새 로그인 시도가 가능하기 전에 경과" -"해야 하는 시간(분)입니다." +#: src/lib/authui/sssd/params.rb:276 src/lib/authui/sssd/params.rb:281 +msgid "The time in minutes which has to pass after offline_failed_login_attempts has been reached before a new login attempt is possible." +msgstr "offline_failed_login_attempts에 도달한 후 새 로그인 시도가 가능하기 전에 경과해야 하는 시간(분)입니다." -#: src/lib/authui/sssd/params.rb:286 -msgid "" -"Controls what kind of messages are shown to the user during authentication." +#: src/lib/authui/sssd/params.rb:286 +msgid "Controls what kind of messages are shown to the user during authentication." msgstr "인증 중 사용자에게 표시되는 메시지 종류를 제어합니다." -#: src/lib/authui/sssd/params.rb:291 -msgid "" -"For any PAM request while SSSD is online, the SSSD will attempt to " -"immediately update the cached identity information for the user in order to " -"ensure that authentication takes place with the latest information." -msgstr "" -"SSSD가 온라인 상태인 동안의 PAM 요청에 대해 SSSD는 인증이 최신 정보로 수행되" -"도록 사용자에 대해 캐시된 ID 정보를 즉시 업데이트하려고 합니다." +#: src/lib/authui/sssd/params.rb:291 +msgid "For any PAM request while SSSD is online, the SSSD will attempt to immediately update the cached identity information for the user in order to ensure that authentication takes place with the latest information." +msgstr "SSSD가 온라인 상태인 동안의 PAM 요청에 대해 SSSD는 인증이 최신 정보로 수행되도록 사용자에 대해 캐시된 ID 정보를 즉시 업데이트하려고 합니다." -#. The kerberos domain section -#: src/lib/authui/sssd/params.rb:296 src/lib/authui/sssd/params.rb:809 -#: src/lib/authui/sssd/params.rb:1138 +#. The kerberos domain section +#: src/lib/authui/sssd/params.rb:296 src/lib/authui/sssd/params.rb:809 +#: src/lib/authui/sssd/params.rb:1138 msgid "Display a warning N days before the password expires." msgstr "비밀번호가 만료되기 N일 전에 경고를 표시합니다." -#: src/lib/authui/sssd/params.rb:313 -msgid "" -"Whether or not to evaluate the sudoNotBefore and sudoNotAfter attributes " -"that implement time-dependent sudoers entries." -msgstr "" -"시간 종속적인 sudoers 항목을 구현하는 sudoNotBefore 및 sudoNotAfter 특성을 평" -"가할지 여부입니다." +#: src/lib/authui/sssd/params.rb:313 +msgid "Whether or not to evaluate the sudoNotBefore and sudoNotAfter attributes that implement time-dependent sudoers entries." +msgstr "시간 종속적인 sudoers 항목을 구현하는 sudoNotBefore 및 sudoNotAfter 특성을 평가할지 여부입니다." -#: src/lib/authui/sssd/params.rb:325 -msgid "" -"Specifies for how many seconds the autofs responder should cache negative " -"hits before asking the back end again." -msgstr "" -"autofs 응답기에서 백 엔드에 다시 확인하기 전에 부정 적중을 캐시해야 하는 시간" -"(초)을 지정합니다." +#: src/lib/authui/sssd/params.rb:325 +msgid "Specifies for how many seconds the autofs responder should cache negative hits before asking the back end again." +msgstr "autofs 응답기에서 백 엔드에 다시 확인하기 전에 부정 적중을 캐시해야 하는 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:337 -msgid "" -"Whether or not to hash host names and addresses in the managed known_hosts " -"file." +#: src/lib/authui/sssd/params.rb:337 +msgid "Whether or not to hash host names and addresses in the managed known_hosts file." msgstr "관리되는 known_hosts 파일의 호스트 이름과 주소를 해시할지 여부입니다." -#: src/lib/authui/sssd/params.rb:342 -msgid "" -"How many seconds to keep a host in the managed known_hosts file after its " -"host keys were requested." -msgstr "" -"호스트 키가 요청된 후 관리되는 known_hosts 파일에 호스트를 유지할 시간(초)입" -"니다." +#: src/lib/authui/sssd/params.rb:342 +msgid "How many seconds to keep a host in the managed known_hosts file after its host keys were requested." +msgstr "호스트 키가 요청된 후 관리되는 known_hosts 파일에 호스트를 유지할 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:355 src/lib/authui/sssd/params.rb:360 -msgid "" -"UID and GID limits for the domain. If a domain contains an entry that is " -"outside these limits, it is ignored." -msgstr "" -"도메인에 대한 UID 및 GID 한도입니다. 도메인에 이러한 한도를 벗어난 항목이 포" -"함된 경우 무시됩니다." +#: src/lib/authui/sssd/params.rb:355 src/lib/authui/sssd/params.rb:360 +msgid "UID and GID limits for the domain. If a domain contains an entry that is outside these limits, it is ignored." +msgstr "도메인에 대한 UID 및 GID 한도입니다. 도메인에 이러한 한도를 벗어난 항목이 포함된 경우 무시됩니다." -#: src/lib/authui/sssd/params.rb:366 +#: src/lib/authui/sssd/params.rb:366 msgid "Read all entities from backend database (increase server load)" msgstr "백엔드 데이터베이스의 모든 엔터티 읽기(서버 부하 증가)" -#: src/lib/authui/sssd/params.rb:371 -msgid "" -"If the service does not terminate after “force_timeout” seconds, the monitor " -"will forcibly shut it down by sending a SIGKILL signal." -msgstr "" -"“force_timeout”초 후에도 서비스가 종료되지 않을 경우 모니터에서 SIGKILL 신호" -"를 보내 강제로 서비스를 종료합니다." +#: src/lib/authui/sssd/params.rb:371 +msgid "If the service does not terminate after “force_timeout” seconds, the monitor will forcibly shut it down by sending a SIGKILL signal." +msgstr "“force_timeout”초 후에도 서비스가 종료되지 않을 경우 모니터에서 SIGKILL 신호를 보내 강제로 서비스를 종료합니다." -#: src/lib/authui/sssd/params.rb:376 -msgid "" -"How many seconds nss_sss should consider entries valid before asking the " -"backend again." -msgstr "" -"nss_sss에서 백 엔드에 다시 확인하기 전에 항목을 유효한 것으로 간주하는 시간" -"(초)입니다." +#: src/lib/authui/sssd/params.rb:376 +msgid "How many seconds nss_sss should consider entries valid before asking the backend again." +msgstr "nss_sss에서 백 엔드에 다시 확인하기 전에 항목을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:381 -msgid "" -"How many seconds nss_sss should consider user entries valid before asking " -"the backend again." -msgstr "" -"nss_sss에서 백 엔드에 다시 확인하기 전에 사용자 항목을 유효한 것으로 간주하" -"는 시간(초)입니다." +#: src/lib/authui/sssd/params.rb:381 +msgid "How many seconds nss_sss should consider user entries valid before asking the backend again." +msgstr "nss_sss에서 백 엔드에 다시 확인하기 전에 사용자 항목을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:386 -msgid "" -"How many seconds nss_sss should consider group entries valid before asking " -"the backend again." -msgstr "" -"nss_sss에서 백 엔드에 다시 확인하기 전에 그룹 항목을 유효한 것으로 간주하는 " -"시간(초)입니다." +#: src/lib/authui/sssd/params.rb:386 +msgid "How many seconds nss_sss should consider group entries valid before asking the backend again." +msgstr "nss_sss에서 백 엔드에 다시 확인하기 전에 그룹 항목을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:391 -msgid "" -"How many seconds nss_sss should consider netgroup entries valid before " -"asking the backend again." -msgstr "" -"nss_sss에서 백 엔드에 다시 확인하기 전에 netgroup 항목을 유효한 것으로 간주하" -"는 시간(초)입니다." +#: src/lib/authui/sssd/params.rb:391 +msgid "How many seconds nss_sss should consider netgroup entries valid before asking the backend again." +msgstr "nss_sss에서 백 엔드에 다시 확인하기 전에 netgroup 항목을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:396 -msgid "" -"How many seconds nss_sss should consider service entries valid before asking " -"the backend again." -msgstr "" -"nss_sss에서 백 엔드에 다시 확인하기 전에 서비스 항목을 유효한 것으로 간주하" -"는 시간(초)입니다." +#: src/lib/authui/sssd/params.rb:396 +msgid "How many seconds nss_sss should consider service entries valid before asking the backend again." +msgstr "nss_sss에서 백 엔드에 다시 확인하기 전에 서비스 항목을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:401 -msgid "" -"How many seconds sudo should consider rules valid before asking the backend " -"again." -msgstr "" -"sudo에서 백 엔드에 다시 확인하기 전에 규칙을 유효한 것으로 간주하는 시간(초)" -"입니다." +#: src/lib/authui/sssd/params.rb:401 +msgid "How many seconds sudo should consider rules valid before asking the backend again." +msgstr "sudo에서 백 엔드에 다시 확인하기 전에 규칙을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:406 -msgid "" -"How many seconds the autofs service should consider automounter maps valid " -"before asking the backend again." -msgstr "" -"autofs 서비스에서 백 엔드에 다시 확인하기 전에 자동 마운터 맵을 유효한 것으" -"로 간주하는 시간(초)입니다." +#: src/lib/authui/sssd/params.rb:406 +msgid "How many seconds the autofs service should consider automounter maps valid before asking the backend again." +msgstr "autofs 서비스에서 백 엔드에 다시 확인하기 전에 자동 마운터 맵을 유효한 것으로 간주하는 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:412 +#: src/lib/authui/sssd/params.rb:412 msgid "Cache credentials for offline use" msgstr "오프라인 사용을 위한 인증서 캐시" -#: src/lib/authui/sssd/params.rb:417 -msgid "" -"Number of days entries are left in cache after last successful login before " -"being removed during a cleanup of the cache." -msgstr "" -"캐시 정리 중 제거되기 전에 항목이 마지막으로 성공한 로그인 이후 캐시에 유지되" -"는 일수입니다." +#: src/lib/authui/sssd/params.rb:417 +msgid "Number of days entries are left in cache after last successful login before being removed during a cleanup of the cache." +msgstr "캐시 정리 중 제거되기 전에 항목이 마지막으로 성공한 로그인 이후 캐시에 유지되는 일수입니다." -#: src/lib/authui/sssd/params.rb:424 +#: src/lib/authui/sssd/params.rb:424 msgid "The identification provider used for the domain." msgstr "도메인에 사용되는 ID 공급자입니다." -#: src/lib/authui/sssd/params.rb:429 -msgid "" -"Use the full name and domain (as formatted by the domain's full_name_format) " -"as the user's login name reported to NSS." -msgstr "" -"전체 이름 및 도메인(도메인의 full_name_format 형식 사용)을 NSS에 보고되는 사" -"용자 로그인 이름으로 사용합니다." +#: src/lib/authui/sssd/params.rb:429 +msgid "Use the full name and domain (as formatted by the domain's full_name_format) as the user's login name reported to NSS." +msgstr "전체 이름 및 도메인(도메인의 full_name_format 형식 사용)을 NSS에 보고되는 사용자 로그인 이름으로 사용합니다." -#: src/lib/authui/sssd/params.rb:436 +#: src/lib/authui/sssd/params.rb:436 msgid "The authentication provider used for the domain" msgstr "도메인에 사용되는 인증 공급자" -#: src/lib/authui/sssd/params.rb:442 +#: src/lib/authui/sssd/params.rb:442 msgid "The access control provider used for the domain." msgstr "도메인에 사용되는 액세스 제어 공급자입니다." -#: src/lib/authui/sssd/params.rb:447 -msgid "" -"The provider which should handle change password operations for the domain." +#: src/lib/authui/sssd/params.rb:447 +msgid "The provider which should handle change password operations for the domain." msgstr "도메인에 대한 비밀번호 변경 작업을 처리해야 하는 공급자입니다." -#: src/lib/authui/sssd/params.rb:453 +#: src/lib/authui/sssd/params.rb:453 msgid "The SUDO provider used for the domain." msgstr "도메인에 사용되는 SUDO 공급자입니다." -#: src/lib/authui/sssd/params.rb:459 +#: src/lib/authui/sssd/params.rb:459 msgid "The provider which should handle loading of selinux settings." msgstr "selinux 설정 로드를 처리해야 하는 공급자입니다." -#: src/lib/authui/sssd/params.rb:465 +#: src/lib/authui/sssd/params.rb:465 msgid "The provider which should handle fetching of subdomains." msgstr "하위 도메인 가져오기를 처리해야 하는 공급자입니다." -#: src/lib/authui/sssd/params.rb:471 +#: src/lib/authui/sssd/params.rb:471 msgid "The autofs provider used for the domain." msgstr "도메인에 사용되는 autofs 공급자입니다." -#: src/lib/authui/sssd/params.rb:477 +#: src/lib/authui/sssd/params.rb:477 msgid "The provider used for retrieving host identity information." msgstr "호스트 ID 정보를 검색하는 데 사용되는 공급자입니다." -#: src/lib/authui/sssd/params.rb:482 -msgid "" -"Regular expression for this domain that describes how to parse the string " -"containing user name and domain into these components." -msgstr "" -"사용자 이름과 도메인이 포함된 문자열을 이러한 구성요소로 구문 분석하는 방법" -"을 설명하는 이 도메인에 대한 정규식입니다." +#: src/lib/authui/sssd/params.rb:482 +msgid "Regular expression for this domain that describes how to parse the string containing user name and domain into these components." +msgstr "사용자 이름과 도메인이 포함된 문자열을 이러한 구성요소로 구문 분석하는 방법을 설명하는 이 도메인에 대한 정규식입니다." -#: src/lib/authui/sssd/params.rb:487 -msgid "" -"A printf(3)-compatible format that describes how to translate a (name, " -"domain) tuple for this domain into a fully qualified name." -msgstr "" -"이 도메인에 대한 (이름, 도메인) 튜플을 정규화된 이름으로 변환하는 방법을 설명" -"하는 printf(3) 호환 형식입니다." +#: src/lib/authui/sssd/params.rb:487 +msgid "A printf(3)-compatible format that describes how to translate a (name, domain) tuple for this domain into a fully qualified name." +msgstr "이 도메인에 대한 (이름, 도메인) 튜플을 정규화된 이름으로 변환하는 방법을 설명하는 printf(3) 호환 형식입니다." -#: src/lib/authui/sssd/params.rb:493 -msgid "" -"Provides the ability to select preferred address family to use when " -"performing DNS lookups." -msgstr "" -"DNS 조회를 수행할 때 사용할 기본 주소 패밀리를 선택할 수 있는 기능을 제공합니" -"다." +#: src/lib/authui/sssd/params.rb:493 +msgid "Provides the ability to select preferred address family to use when performing DNS lookups." +msgstr "DNS 조회를 수행할 때 사용할 기본 주소 패밀리를 선택할 수 있는 기능을 제공합니다." -#: src/lib/authui/sssd/params.rb:498 -msgid "" -"Defines the amount of time (in seconds) to wait for a reply from the DNS " -"resolver before assuming that it is unreachable." -msgstr "" -"연결할 수 없다고 가정하기 전에 DNS 확인자의 응답을 기다릴 시간(초)을 정의합니" -"다." +#: src/lib/authui/sssd/params.rb:498 +msgid "Defines the amount of time (in seconds) to wait for a reply from the DNS resolver before assuming that it is unreachable." +msgstr "연결할 수 없다고 가정하기 전에 DNS 확인자의 응답을 기다릴 시간(초)을 정의합니다." -#: src/lib/authui/sssd/params.rb:502 -msgid "" -"If service discovery is used in the back end, specifies the domain part of " -"the service discovery DNS query." -msgstr "" -"서비스 검색이 백 엔드에서 사용되는 경우 서비스 검색 DNS 쿼리의 도메인 부분을 " -"지정합니다." +#: src/lib/authui/sssd/params.rb:502 +msgid "If service discovery is used in the back end, specifies the domain part of the service discovery DNS query." +msgstr "서비스 검색이 백 엔드에서 사용되는 경우 서비스 검색 DNS 쿼리의 도메인 부분을 지정합니다." -#: src/lib/authui/sssd/params.rb:506 +#: src/lib/authui/sssd/params.rb:506 msgid "Override the primary GID value with the one specified." msgstr "주 GID 값을 지정된 값으로 무효화합니다." -#: src/lib/authui/sssd/params.rb:516 +#: src/lib/authui/sssd/params.rb:516 msgid "Treat user and group names as case sensitive." msgstr "사용자 및 그룹 이름을 대소문자 구분으로 처리합니다." -#: src/lib/authui/sssd/params.rb:521 -msgid "" -"When a user or group is looked up by name in the proxy provider, a second " -"lookup by ID is performed to 'canonicalize' the name in case the requested " -"name was an alias." -msgstr "" -"프록시 공급자에서 사용자 또는 그룹을 이름으로 조회할 때 요청된 이름이 별칭인 " -"경우 이름을 '정규화'하기 위해 두 번째 ID별 조회가 수행됩니다." +#: src/lib/authui/sssd/params.rb:521 +msgid "When a user or group is looked up by name in the proxy provider, a second lookup by ID is performed to 'canonicalize' the name in case the requested name was an alias." +msgstr "프록시 공급자에서 사용자 또는 그룹을 이름으로 조회할 때 요청된 이름이 별칭인 경우 이름을 '정규화'하기 위해 두 번째 ID별 조회가 수행됩니다." -#: src/lib/authui/sssd/params.rb:526 -msgid "" -"Use this homedir as default value for all subdomains within this domain." -msgstr "" -"이 도메인 내의 모든 하위 도메인에 대한 기본값으로 이 homedir을 사용합니다." +#: src/lib/authui/sssd/params.rb:526 +msgid "Use this homedir as default value for all subdomains within this domain." +msgstr "이 도메인 내의 모든 하위 도메인에 대한 기본값으로 이 homedir을 사용합니다." -#. Following options will be provided by SSSD's 'simple' access-control provider -#: src/lib/authui/sssd/params.rb:532 +#. Following options will be provided by SSSD's 'simple' access-control provider +#: src/lib/authui/sssd/params.rb:532 msgid "Comma separated list of users who are allowed to log in." msgstr "로그인할 수 있는 사용자의 쉼표로 구분된 목록입니다." -#: src/lib/authui/sssd/params.rb:537 -msgid "" -"Comma separated list of groups who are allowed to log in. This applies only " -"to groups within this SSSD domain." -msgstr "" -"로그인할 수 있는 그룹의 쉼표로 구분된 목록입니다. 이 SSSD 도메인 내의 그룹에" -"만 적용됩니다." +#: src/lib/authui/sssd/params.rb:537 +msgid "Comma separated list of groups who are allowed to log in. This applies only to groups within this SSSD domain." +msgstr "로그인할 수 있는 그룹의 쉼표로 구분된 목록입니다. 이 SSSD 도메인 내의 그룹에만 적용됩니다." -#: src/lib/authui/sssd/params.rb:542 -msgid "" -"Comma separated list of groups that are explicitly denied access. This " -"applies only to groups within this SSSD domain." -msgstr "" -"명시적으로 액세스가 거부된 그룹의 쉼표로 구분된 목록입니다. 이 SSSD 도메인 내" -"의 그룹에만 적용됩니다." +#: src/lib/authui/sssd/params.rb:542 +msgid "Comma separated list of groups that are explicitly denied access. This applies only to groups within this SSSD domain." +msgstr "명시적으로 액세스가 거부된 그룹의 쉼표로 구분된 목록입니다. 이 SSSD 도메인 내의 그룹에만 적용됩니다." -#. The local domain section -#. This section contains settings for domain that stores users and groups in SSSD native database, that is, a domain that uses id_provider=local. -#: src/lib/authui/sssd/params.rb:551 -msgid "" -"The tools append the login name to base_directory and use that as the home " -"directory." -msgstr "" -"도구는 base_directory에 로그인 이름을 추가하여 홈 디렉토리로 사용합니다." +#. The local domain section +#. This section contains settings for domain that stores users and groups in SSSD native database, that is, a domain that uses id_provider=local. +#: src/lib/authui/sssd/params.rb:551 +msgid "The tools append the login name to base_directory and use that as the home directory." +msgstr "도구는 base_directory에 로그인 이름을 추가하여 홈 디렉토리로 사용합니다." -#: src/lib/authui/sssd/params.rb:556 -msgid "" -"Indicate if a home directory should be created by default for new users." +#: src/lib/authui/sssd/params.rb:556 +msgid "Indicate if a home directory should be created by default for new users." msgstr "기본적으로 새 사용자에 대한 홈 디렉토리를 생성할지 여부를 나타냅니다." -#: src/lib/authui/sssd/params.rb:561 -msgid "" -"Indicate if a home directory should be removed by default for deleted users." -msgstr "" -"기본적으로 삭제된 사용자에 대한 홈 디렉토리를 제거할지 여부를 나타냅니다." +#: src/lib/authui/sssd/params.rb:561 +msgid "Indicate if a home directory should be removed by default for deleted users." +msgstr "기본적으로 삭제된 사용자에 대한 홈 디렉토리를 제거할지 여부를 나타냅니다." -#: src/lib/authui/sssd/params.rb:566 -msgid "" -"Used by sss_useradd(8) to specify the default permissions on a newly created " -"home directory." -msgstr "" -"sss_useradd(8)에서 새로 생성된 홈 디렉토리에 대한 기본 권한을 지정하는 데 사" -"용됩니다." +#: src/lib/authui/sssd/params.rb:566 +msgid "Used by sss_useradd(8) to specify the default permissions on a newly created home directory." +msgstr "sss_useradd(8)에서 새로 생성된 홈 디렉토리에 대한 기본 권한을 지정하는 데 사용됩니다." -#: src/lib/authui/sssd/params.rb:571 -msgid "" -"The skeleton directory, which contains files and directories to be copied in " -"the user's home directory, when the home directory is created by sss_useradd" -"(8)" -msgstr "" -"sss_useradd(8)에 의해 홈 디렉토리가 생성될 때 사용자 홈 디렉토리로 복사할 파" -"일 및 디렉토리가 포함된 골격 디렉토리입니다." +#: src/lib/authui/sssd/params.rb:571 +msgid "The skeleton directory, which contains files and directories to be copied in the user's home directory, when the home directory is created by sss_useradd(8)" +msgstr "sss_useradd(8)에 의해 홈 디렉토리가 생성될 때 사용자 홈 디렉토리로 복사할 파일 및 디렉토리가 포함된 골격 디렉토리입니다." -#: src/lib/authui/sssd/params.rb:576 +#: src/lib/authui/sssd/params.rb:576 msgid "The mail spool directory." msgstr "메일 스풀 디렉토리입니다." -#: src/lib/authui/sssd/params.rb:580 +#: src/lib/authui/sssd/params.rb:580 msgid "The command that is run after a user is removed." msgstr "사용자가 제거된 후 실행되는 명령입니다." -#. The ldap domain section -#: src/lib/authui/sssd/params.rb:589 +#. The ldap domain section +#: src/lib/authui/sssd/params.rb:589 msgid "(Active Directory specific) Use token-groups attribute if available" msgstr "(Active Directory 관련) 사용 가능한 경우 토큰 그룹 특성 사용" -#: src/lib/authui/sssd/params.rb:594 +#: src/lib/authui/sssd/params.rb:594 msgid "URIs (ldap://) of LDAP servers (comma separated)" msgstr "LDAP 서버의 URI(ldap://)(쉼표로 구분)" -#: src/lib/authui/sssd/params.rb:599 -msgid "" -"An optional base DN to restrict LDAP sudo-rule searches. The default value " -"is ldap_search_base." -msgstr "" -"LDAP sudo-rule 검색을 제한하는 선택적 기본 DN입니다. 기본값은 " -"ldap_search_base입니다." +#: src/lib/authui/sssd/params.rb:599 +msgid "An optional base DN to restrict LDAP sudo-rule searches. The default value is ldap_search_base." +msgstr "LDAP sudo-rule 검색을 제한하는 선택적 기본 DN입니다. 기본값은 ldap_search_base입니다." -#: src/lib/authui/sssd/params.rb:603 -msgid "" -"Specifies the comma-separated list of URIs of the LDAP servers to which SSSD " -"should connect in the order of preference." -msgstr "" -"SSSD가 기본 설정 순으로 연결해야 하는 LDAP 서버 URI의 쉼표로 구분된 목록을 지" -"정합니다." +#: src/lib/authui/sssd/params.rb:603 +msgid "Specifies the comma-separated list of URIs of the LDAP servers to which SSSD should connect in the order of preference." +msgstr "SSSD가 기본 설정 순으로 연결해야 하는 LDAP 서버 URI의 쉼표로 구분된 목록을 지정합니다." -#: src/lib/authui/sssd/params.rb:608 src/lib/authui/sssd/params.rb:613 -msgid "" -"Specifies the comma-separated list of URIs of the LDAP servers to which SSSD " -"should connect in the order of preference to change the password of a user." -msgstr "" -"SSSD가 사용자 비밀번호를 변경하기 위해 기본 설정 순으로 연결해야 하는 LDAP 서" -"버 URI의 쉼표로 구분된 목록을 지정합니다." +#: src/lib/authui/sssd/params.rb:608 src/lib/authui/sssd/params.rb:613 +msgid "Specifies the comma-separated list of URIs of the LDAP servers to which SSSD should connect in the order of preference to change the password of a user." +msgstr "SSSD가 사용자 비밀번호를 변경하기 위해 기본 설정 순으로 연결해야 하는 LDAP 서버 URI의 쉼표로 구분된 목록을 지정합니다." -#: src/lib/authui/sssd/params.rb:618 +#: src/lib/authui/sssd/params.rb:618 msgid "Base DN for LDAP search" msgstr "LDAP 검색을 위한 기본 DN" -#: src/lib/authui/sssd/params.rb:625 +#: src/lib/authui/sssd/params.rb:625 msgid "LDAP schema type" msgstr "LDAP 스키마 유형" -#: src/lib/authui/sssd/params.rb:629 +#: src/lib/authui/sssd/params.rb:629 msgid "The default bind DN to use for performing LDAP operations." msgstr "LDAP 작업을 수행하는 데 사용할 기본 바인드 DN입니다." -#: src/lib/authui/sssd/params.rb:635 +#: src/lib/authui/sssd/params.rb:635 msgid "The type of the authentication token of the default bind DN." msgstr "기본 바인드 DN의 인증 토큰 형식입니다." -#: src/lib/authui/sssd/params.rb:639 +#: src/lib/authui/sssd/params.rb:639 msgid "The authentication token of the default bind DN." msgstr "기본 바인드 DN의 인증 토큰입니다." -#: src/lib/authui/sssd/params.rb:644 +#: src/lib/authui/sssd/params.rb:644 msgid "The object class of a user entry in LDAP." msgstr "LDAP에 포함된 사용자 항목의 객체 클래스입니다." -#: src/lib/authui/sssd/params.rb:649 +#: src/lib/authui/sssd/params.rb:649 msgid "The LDAP attribute that corresponds to the user's login name." msgstr "사용자 로그인 이름에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:654 +#: src/lib/authui/sssd/params.rb:654 msgid "The LDAP attribute that corresponds to the user's id." msgstr "사용자 ID에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:659 +#: src/lib/authui/sssd/params.rb:659 msgid "The LDAP attribute that corresponds to the user's primary group id." msgstr "사용자의 주 그룹 ID에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:664 +#: src/lib/authui/sssd/params.rb:664 msgid "The LDAP attribute that corresponds to the user's gecos field." msgstr "사용자의 gecos 필드에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:669 -msgid "" -" The LDAP attribute that contains the name of the user's home directory." +#: src/lib/authui/sssd/params.rb:669 +msgid " The LDAP attribute that contains the name of the user's home directory." msgstr " 사용자의 홈 디렉토리 이름이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:674 +#: src/lib/authui/sssd/params.rb:674 msgid "The LDAP attribute that contains the path to the user's default shell." msgstr "사용자의 기본 셸 경로가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:679 +#: src/lib/authui/sssd/params.rb:679 msgid "The LDAP attribute that contains the UUID/GUID of an LDAP user object." msgstr "LDAP 사용자 객체의 UUID/GUID가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:684 +#: src/lib/authui/sssd/params.rb:684 msgid "The LDAP attribute that contains the objectSID of an LDAP user object." msgstr "LDAP 사용자 객체의 objectSID가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:689 src/lib/authui/sssd/params.rb:894 -msgid "" -"The LDAP attribute that contains timestamp of the last modification of the " -"parent object." +#: src/lib/authui/sssd/params.rb:689 src/lib/authui/sssd/params.rb:894 +msgid "The LDAP attribute that contains timestamp of the last modification of the parent object." msgstr "상위 객체의 마지막 수정 타임스탬프가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:694 -msgid "" -"When using ldap_pwd_policy=shadow, this parameter contains the name of an " -"LDAP attribute corresponding to its shadow(5) counterpart (date of the last " -"password change)." -msgstr "" -"ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(마지" -"막 비밀번호 변경 날짜)에 해당하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:694 +msgid "When using ldap_pwd_policy=shadow, this parameter contains the name of an LDAP attribute corresponding to its shadow(5) counterpart (date of the last password change)." +msgstr "ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(마지막 비밀번호 변경 날짜)에 해당하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:699 -msgid "" -"When using ldap_pwd_policy=shadow, this parameter contains the name of an " -"LDAP attribute corresponding to its shadow(5) counterpart (minimum password " -"age)." -msgstr "" -"ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(최" -"소 비밀번호 사용 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:699 +msgid "When using ldap_pwd_policy=shadow, this parameter contains the name of an LDAP attribute corresponding to its shadow(5) counterpart (minimum password age)." +msgstr "ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(최소 비밀번호 사용 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:704 -msgid "" -"When using ldap_pwd_policy=shadow, this parameter contains the name of an " -"LDAP attribute corresponding to its shadow(5) counterpart (maximum password " -"age)." -msgstr "" -"ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(최" -"대 비밀번호 사용 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:704 +msgid "When using ldap_pwd_policy=shadow, this parameter contains the name of an LDAP attribute corresponding to its shadow(5) counterpart (maximum password age)." +msgstr "ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(최대 비밀번호 사용 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:709 -msgid "" -"When using ldap_pwd_policy=shadow, this parameter contains the name of an " -"LDAP attribute corresponding to its shadow(5) counterpart (password warning " -"period)." -msgstr "" -"ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(비밀" -"번호 경고 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:709 +msgid "When using ldap_pwd_policy=shadow, this parameter contains the name of an LDAP attribute corresponding to its shadow(5) counterpart (password warning period)." +msgstr "ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(비밀번호 경고 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:714 -msgid "" -"When using ldap_pwd_policy=shadow, this parameter contains the name of an " -"LDAP attribute corresponding to its shadow(5) counterpart (password " -"inactivity period)." -msgstr "" -"ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(비밀" -"번호 비활성 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:714 +msgid "When using ldap_pwd_policy=shadow, this parameter contains the name of an LDAP attribute corresponding to its shadow(5) counterpart (password inactivity period)." +msgstr "ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(비밀번호 비활성 기간)에 해당하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:719 -msgid "" -"When using ldap_pwd_policy=shadow or ldap_account_expire_policy=shadow, this " -"parameter contains the name of an LDAP attribute corresponding to its shadow" -"(5) counterpart (account expiration date)." -msgstr "" -"ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(계" -"정 만료 날짜)에 해당하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:719 +msgid "When using ldap_pwd_policy=shadow or ldap_account_expire_policy=shadow, this parameter contains the name of an LDAP attribute corresponding to its shadow(5) counterpart (account expiration date)." +msgstr "ldap_pwd_policy=shadow를 사용하는 경우 이 파라미터에 shadow(5) 대응 항목(계정 만료 날짜)에 해당하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:724 -msgid "" -"When using ldap_pwd_policy=mit_kerberos, this parameter contains the name of " -"an LDAP attribute storing the date and time of last password change in " -"kerberos." -msgstr "" -"ldap_pwd_policy=mit_kerberos를 사용하는 경우 이 파라미터에 kerberos의 마지막 " -"비밀번호 변경 날짜와 시간을 저장하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:724 +msgid "When using ldap_pwd_policy=mit_kerberos, this parameter contains the name of an LDAP attribute storing the date and time of last password change in kerberos." +msgstr "ldap_pwd_policy=mit_kerberos를 사용하는 경우 이 파라미터에 kerberos의 마지막 비밀번호 변경 날짜와 시간을 저장하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:729 -msgid "" -"When using ldap_pwd_policy=mit_kerberos, this parameter contains the name of " -"an LDAP attribute storing the date and time when current password expires." -msgstr "" -"ldap_pwd_policy=mit_kerberos를 사용하는 경우 이 파라미터에 현재 비밀번호가 만" -"료되는 날짜와 시간을 저장하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:729 +msgid "When using ldap_pwd_policy=mit_kerberos, this parameter contains the name of an LDAP attribute storing the date and time when current password expires." +msgstr "ldap_pwd_policy=mit_kerberos를 사용하는 경우 이 파라미터에 현재 비밀번호가 만료되는 날짜와 시간을 저장하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:734 -msgid "" -"When using ldap_account_expire_policy=ad, this parameter contains the name " -"of an LDAP attribute storing the expiration time of the account." -msgstr "" -"ldap_account_expire_policy=ad를 사용하는 경우 이 파라미터에 계정 만료 시간을 " -"저장하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:734 +msgid "When using ldap_account_expire_policy=ad, this parameter contains the name of an LDAP attribute storing the expiration time of the account." +msgstr "ldap_account_expire_policy=ad를 사용하는 경우 이 파라미터에 계정 만료 시간을 저장하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:739 -msgid "" -"When using ldap_account_expire_policy=ad, this parameter contains the name " -"of an LDAP attribute storing the user account control bit field." -msgstr "" -"ldap_account_expire_policy=ad를 사용하는 경우 이 파라미터에 사용자 계정 컨트" -"롤 비트 필드를 저장하는 LDAP 특성 이름이 포함됩니다." +#: src/lib/authui/sssd/params.rb:739 +msgid "When using ldap_account_expire_policy=ad, this parameter contains the name of an LDAP attribute storing the user account control bit field." +msgstr "ldap_account_expire_policy=ad를 사용하는 경우 이 파라미터에 사용자 계정 컨트롤 비트 필드를 저장하는 LDAP 특성 이름이 포함됩니다." -#: src/lib/authui/sssd/params.rb:744 -msgid "" -"When using ldap_account_expire_policy=rhds or equivalent, this parameter " -"determines if access is allowed or not." -msgstr "" -"ldap_account_expire_policy=rhds 또는 동등 항목을 사용하는 경우 이 파라미터는 " -"액세스를 허용할지 여부를 결정합니다." +#: src/lib/authui/sssd/params.rb:744 +msgid "When using ldap_account_expire_policy=rhds or equivalent, this parameter determines if access is allowed or not." +msgstr "ldap_account_expire_policy=rhds 또는 동등 항목을 사용하는 경우 이 파라미터는 액세스를 허용할지 여부를 결정합니다." -#: src/lib/authui/sssd/params.rb:749 -msgid "" -"When using ldap_account_expire_policy=nds, this attribute determines if " -"access is allowed or not." -msgstr "" -"ldap_account_expire_policy=nds를 사용하는 경우 이 특성은 액세스를 허용할지 여" -"부를 결정합니다." +#: src/lib/authui/sssd/params.rb:749 +msgid "When using ldap_account_expire_policy=nds, this attribute determines if access is allowed or not." +msgstr "ldap_account_expire_policy=nds를 사용하는 경우 이 특성은 액세스를 허용할지 여부를 결정합니다." -#: src/lib/authui/sssd/params.rb:754 -msgid "" -"When using ldap_account_expire_policy=nds, this attribute determines until " -"which date access is granted." -msgstr "" -"ldap_account_expire_policy=nds를 사용하는 경우 이 특성은 액세스 권한이 부여되" -"는 종료 날짜를 결정합니다." +#: src/lib/authui/sssd/params.rb:754 +msgid "When using ldap_account_expire_policy=nds, this attribute determines until which date access is granted." +msgstr "ldap_account_expire_policy=nds를 사용하는 경우 이 특성은 액세스 권한이 부여되는 종료 날짜를 결정합니다." -#: src/lib/authui/sssd/params.rb:759 -msgid "" -"When using ldap_account_expire_policy=nds, this attribute determines the " -"hours of a day in a week when access is granted." -msgstr "" -"ldap_account_expire_policy=nds를 사용하는 경우 이 특성은 액세스 권한이 부여되" -"는 요일의 시간을 결정합니다." +#: src/lib/authui/sssd/params.rb:759 +msgid "When using ldap_account_expire_policy=nds, this attribute determines the hours of a day in a week when access is granted." +msgstr "ldap_account_expire_policy=nds를 사용하는 경우 이 특성은 액세스 권한이 부여되는 요일의 시간을 결정합니다." -#: src/lib/authui/sssd/params.rb:764 -msgid "" -"The LDAP attribute that contains the user's Kerberos User Principal Name " -"(UPN)." +#: src/lib/authui/sssd/params.rb:764 +msgid "The LDAP attribute that contains the user's Kerberos User Principal Name (UPN)." msgstr "사용자의 Kerberos UPN(사용자 계정 이름)이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:768 +#: src/lib/authui/sssd/params.rb:768 msgid "The LDAP attribute that contains the user's SSH public keys." msgstr "사용자의 SSH 공개 키가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:773 -msgid "" -"Some directory servers, for example Active Directory, might deliver the " -"realm part of the UPN in lower case, which might cause the authentication to " -"fail." -msgstr "" -"일부 디렉토리 서버(예: Active Directory)는 UPN의 영역 부분을 소문자로 제공하" -"여 인증에 실패할 수도 있습니다." +#: src/lib/authui/sssd/params.rb:773 +msgid "Some directory servers, for example Active Directory, might deliver the realm part of the UPN in lower case, which might cause the authentication to fail." +msgstr "일부 디렉토리 서버(예: Active Directory)는 UPN의 영역 부분을 소문자로 제공하여 인증에 실패할 수도 있습니다." -#: src/lib/authui/sssd/params.rb:774 +#: src/lib/authui/sssd/params.rb:774 msgid "Set this option to true if you want to use an upper-case realm." msgstr "대문자 영역을 사용하려는 경우 이 옵션을 true로 설정하십시오." -#: src/lib/authui/sssd/params.rb:779 -msgid "" -"Specifies how many seconds SSSD has to wait before refreshing its cache of " -"enumerated records." -msgstr "" -"SSSD에서 열거된 레코드 캐시를 새로 고치기 전에 기다려야 하는 시간(초)을 지정" -"합니다." +#: src/lib/authui/sssd/params.rb:779 +msgid "Specifies how many seconds SSSD has to wait before refreshing its cache of enumerated records." +msgstr "SSSD에서 열거된 레코드 캐시를 새로 고치기 전에 기다려야 하는 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:784 -msgid "" -"Determine how often to check the cache for inactive entries (such as groups " -"with no members and users who have never logged in) and remove them to save " -"space." -msgstr "" -"캐시에서 공간을 절약하기 위해 비활성 항목(예: 로그인한 적이 없는 사용자 및 구" -"성원이 없는 그룹)을 확인하고 제거하는 빈도를 결정합니다." +#: src/lib/authui/sssd/params.rb:784 +msgid "Determine how often to check the cache for inactive entries (such as groups with no members and users who have never logged in) and remove them to save space." +msgstr "캐시에서 공간을 절약하기 위해 비활성 항목(예: 로그인한 적이 없는 사용자 및 구성원이 없는 그룹)을 확인하고 제거하는 빈도를 결정합니다." -#: src/lib/authui/sssd/params.rb:789 +#: src/lib/authui/sssd/params.rb:789 msgid "The LDAP attribute that corresponds to the user's full name." msgstr "사용자의 전체 이름에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:794 +#: src/lib/authui/sssd/params.rb:794 msgid "The LDAP attribute that lists the user's group memberships." msgstr "사용자의 그룹 구성원을 나열하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:799 -msgid "" -"If access_provider=ldap and ldap_access_order=authorized_service, SSSD will " -"use the presence of the authorizedService attribute in the user's LDAP entry " -"to determine access privilege." -msgstr "" -"access_provider=ldap 및 ldap_access_order=authorized_service인 경우 SSSD는 사" -"용자 LDAP 항목의 authorizedService 특성 상태를 사용하여 액세스 권한을 결정합" -"니다." +#: src/lib/authui/sssd/params.rb:799 +msgid "If access_provider=ldap and ldap_access_order=authorized_service, SSSD will use the presence of the authorizedService attribute in the user's LDAP entry to determine access privilege." +msgstr "access_provider=ldap 및 ldap_access_order=authorized_service인 경우 SSSD는 사용자 LDAP 항목의 authorizedService 특성 상태를 사용하여 액세스 권한을 결정합니다." -#: src/lib/authui/sssd/params.rb:804 -msgid "" -"If access_provider=ldap and ldap_access_order=host, SSSD will use the " -"presence of the host attribute in the user's LDAP entry to determine access " -"privilege." -msgstr "" -"access_provider=ldap 및 ldap_access_order=host인 경우 SSSD는 사용자 LDAP 항목" -"의 host 특성 상태를 사용하여 액세스 권한을 결정합니다." +#: src/lib/authui/sssd/params.rb:804 +msgid "If access_provider=ldap and ldap_access_order=host, SSSD will use the presence of the host attribute in the user's LDAP entry to determine access privilege." +msgstr "access_provider=ldap 및 ldap_access_order=host인 경우 SSSD는 사용자 LDAP 항목의 host 특성 상태를 사용하여 액세스 권한을 결정합니다." -#: src/lib/authui/sssd/params.rb:814 +#: src/lib/authui/sssd/params.rb:814 msgid "The object class of a group entry in LDAP." msgstr "LDAP에 있는 그룹 항목의 객체 클래스입니다." -#: src/lib/authui/sssd/params.rb:819 +#: src/lib/authui/sssd/params.rb:819 msgid "The LDAP attribute that corresponds to the group name." msgstr "그룹 이름에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:824 +#: src/lib/authui/sssd/params.rb:824 msgid "The LDAP attribute that corresponds to the group's id." msgstr "그룹 ID에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:829 +#: src/lib/authui/sssd/params.rb:829 msgid "The LDAP attribute that contains the names of the group's members." msgstr "그룹 구성원의 이름이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:834 +#: src/lib/authui/sssd/params.rb:834 msgid "The LDAP attribute that contains the UUID/GUID of an LDAP group object." msgstr "LDAP 그룹 객체의 UUID/GUID가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:839 +#: src/lib/authui/sssd/params.rb:839 msgid "The LDAP attribute that contains the objectSID of an LDAP group object." msgstr "LDAP 그룹 객체의 objectSID가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:844 -msgid "" -" The LDAP attribute that contains timestamp of the last modification of the " -"parent object." +#: src/lib/authui/sssd/params.rb:844 +msgid " The LDAP attribute that contains timestamp of the last modification of the parent object." msgstr " 상위 객체의 마지막 수정 타임스탬프가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:850 -msgid "" -"If ldap_schema is set to a schema format that supports nested groups (e.g. " -"RFC2307bis), then this option controls how many levels of nesting SSSD will " -"follow." -msgstr "" -"ldap_schema가 중첩 그룹(예: RFC2307bis)을 지원하는 스키마 형식으로 설정된 경" -"우 이 옵션은 SSSD에서 따를 중첩 수준 수를 제어합니다." +#: src/lib/authui/sssd/params.rb:850 +msgid "If ldap_schema is set to a schema format that supports nested groups (e.g. RFC2307bis), then this option controls how many levels of nesting SSSD will follow." +msgstr "ldap_schema가 중첩 그룹(예: RFC2307bis)을 지원하는 스키마 형식으로 설정된 경우 이 옵션은 SSSD에서 따를 중첩 수준 수를 제어합니다." -#: src/lib/authui/sssd/params.rb:856 -msgid "" -"This option tells SSSD to take advantage of an Active Directory-specific " -"feature which may speed up group lookup operations on deployments with " -"complex or deep nested groups." -msgstr "" -"이 옵션은 복잡한 또는 깊은 중첩 그룹이 포함된 배포에서 조회 작업 속도를 가속" -"화시킬 수 있는 Active Directory 특정 기능을 이용하도록 SSSD에 지정합니다." +#: src/lib/authui/sssd/params.rb:856 +msgid "This option tells SSSD to take advantage of an Active Directory-specific feature which may speed up group lookup operations on deployments with complex or deep nested groups." +msgstr "이 옵션은 복잡한 또는 깊은 중첩 그룹이 포함된 배포에서 조회 작업 속도를 가속화시킬 수 있는 Active Directory 특정 기능을 이용하도록 SSSD에 지정합니다." -#: src/lib/authui/sssd/params.rb:862 -msgid "" -"This option tells SSSD to take advantage of an Active Directory-specific " -"feature which might speed up initgroups operations (most notably when " -"dealing with complex or deep nested groups)." -msgstr "" -"이 옵션은 특히 복잡한 또는 깊은 중첩 그룹을 처리할 때 initgroups 작업 속도를 " -"가속화시킬 수 있는 Active Directory 특정 기능을 이용하도록 SSSD에 지정합니다." +#: src/lib/authui/sssd/params.rb:862 +msgid "This option tells SSSD to take advantage of an Active Directory-specific feature which might speed up initgroups operations (most notably when dealing with complex or deep nested groups)." +msgstr "이 옵션은 특히 복잡한 또는 깊은 중첩 그룹을 처리할 때 initgroups 작업 속도를 가속화시킬 수 있는 Active Directory 특정 기능을 이용하도록 SSSD에 지정합니다." -#: src/lib/authui/sssd/params.rb:868 +#: src/lib/authui/sssd/params.rb:868 msgid " The object class of a netgroup entry in LDAP." msgstr " LDAP에 있는 netgroup 항목의 객체 클래스입니다." -#: src/lib/authui/sssd/params.rb:874 +#: src/lib/authui/sssd/params.rb:874 msgid "The LDAP attribute that corresponds to the netgroup name." msgstr "netgroup 이름에 해당하는 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:879 +#: src/lib/authui/sssd/params.rb:879 msgid "The LDAP attribute that contains the names of the netgroup's members." msgstr "netgroup 구성원의 이름이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:884 -msgid "" -"The LDAP attribute that contains the (host, user, domain) netgroup triples." +#: src/lib/authui/sssd/params.rb:884 +msgid "The LDAP attribute that contains the (host, user, domain) netgroup triples." msgstr "(호스트, 사용자, 도메인) netgroup 세 항목이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:889 -msgid "" -"The LDAP attribute that contains the UUID/GUID of an LDAP netgroup object." +#: src/lib/authui/sssd/params.rb:889 +msgid "The LDAP attribute that contains the UUID/GUID of an LDAP netgroup object." msgstr "LDAP netgroup 객체의 UUID/GUID가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:899 +#: src/lib/authui/sssd/params.rb:899 msgid "The object class of a service entry in LDAP." msgstr "LDAP에 있는 서비스 항목의 객체 클래스입니다." -#: src/lib/authui/sssd/params.rb:904 -msgid "" -"The LDAP attribute that contains the name of service attributes and their " -"aliases." +#: src/lib/authui/sssd/params.rb:904 +msgid "The LDAP attribute that contains the name of service attributes and their aliases." msgstr "서비스 특성 이름 및 해당 별칭이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:909 +#: src/lib/authui/sssd/params.rb:909 msgid "The LDAP attribute that contains the port managed by this service." msgstr "이 서비스에서 관리되는 포트가 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:914 -msgid "" -"The LDAP attribute that contains the protocols understood by this service." +#: src/lib/authui/sssd/params.rb:914 +msgid "The LDAP attribute that contains the protocols understood by this service." msgstr "이 서비스에서 인식되는 프로토콜이 포함된 LDAP 특성입니다." -#: src/lib/authui/sssd/params.rb:919 -msgid "" -"An optional base DN, search scope and LDAP filter to restrict LDAP service " -"searches for this attribute type. The default value is ldap_search_base." -msgstr "" -"이 특성 유형에 대한 LDAP 서비스 검색을 제한하는 선택적 기본 DN, 검색 범위 및 " -"LDAP 필터입니다." +#: src/lib/authui/sssd/params.rb:919 +msgid "An optional base DN, search scope and LDAP filter to restrict LDAP service searches for this attribute type. The default value is ldap_search_base." +msgstr "이 특성 유형에 대한 LDAP 서비스 검색을 제한하는 선택적 기본 DN, 검색 범위 및 LDAP 필터입니다." -#: src/lib/authui/sssd/params.rb:924 -msgid "" -" Specifies the timeout (in seconds) that ldap searches are allowed to run " -"before they are cancelled and cached results are returned (and offline mode " -"is entered)." -msgstr "" -" 취소되고 캐시된 결과가 반환되며 오프라인 모드로 전환되기 전에 LDAP 검색을 실" -"행할 수 있는 제한 시간(초)을 지정합니다." +#: src/lib/authui/sssd/params.rb:924 +msgid " Specifies the timeout (in seconds) that ldap searches are allowed to run before they are cancelled and cached results are returned (and offline mode is entered)." +msgstr " 취소되고 캐시된 결과가 반환되며 오프라인 모드로 전환되기 전에 LDAP 검색을 실행할 수 있는 제한 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:929 -msgid "" -"Specifies the timeout (in seconds) that ldap searches for user and group " -"enumerations are allowed to run before they are cancelled and cached results " -"are returned (and offline mode is entered)." -msgstr "" -"취소되고 캐시된 결과가 반환되며 오프라인 모드로 전환되기 전에 사용자 및 그룹 " -"열거에 대한 LDAP 검색을 실행할 수 있는 제한 시간(초)을 지정합니다." +#: src/lib/authui/sssd/params.rb:929 +msgid "Specifies the timeout (in seconds) that ldap searches for user and group enumerations are allowed to run before they are cancelled and cached results are returned (and offline mode is entered)." +msgstr "취소되고 캐시된 결과가 반환되며 오프라인 모드로 전환되기 전에 사용자 및 그룹 열거에 대한 LDAP 검색을 실행할 수 있는 제한 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:934 -msgid "" -"Specifies the timeout (in seconds) after which the poll(2)/select(2) " -"following a connect(2) returns in case of no activity." -msgstr "" -"활동이 없을 경우 connect(2) 뒤의 poll(2)/select(2)가 반환되는 제한 시간(초)" -"을 지정합니다." +#: src/lib/authui/sssd/params.rb:934 +msgid "Specifies the timeout (in seconds) after which the poll(2)/select(2) following a connect(2) returns in case of no activity." +msgstr "활동이 없을 경우 connect(2) 뒤의 poll(2)/select(2)가 반환되는 제한 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:939 -msgid "" -"Specifies a timeout (in seconds) after which calls to synchronous LDAP APIs " -"will abort if no response is received." -msgstr "" -"응답이 수신되지 않을 경우 동기 LDAP API 호출이 중단되는 제한 시간(초)을 지정" -"합니다." +#: src/lib/authui/sssd/params.rb:939 +msgid "Specifies a timeout (in seconds) after which calls to synchronous LDAP APIs will abort if no response is received." +msgstr "응답이 수신되지 않을 경우 동기 LDAP API 호출이 중단되는 제한 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:944 -msgid "" -"Specifies a timeout (in seconds) that a connection to an LDAP server will be " -"maintained." +#: src/lib/authui/sssd/params.rb:944 +msgid "Specifies a timeout (in seconds) that a connection to an LDAP server will be maintained." msgstr "LDAP 서버에 대한 연결을 유지 관리할 제한 시간(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:949 -msgid "" -"Specify the number of records to retrieve from LDAP in a single request. " -"Some LDAP servers enforce a maximum limit per-request." -msgstr "" -"단일 요청으로 LDAP에서 검색할 레코드 수를 지정합니다. 일부 LDAP 서버는 요청" -"당 최대한도를 적용합니다." +#: src/lib/authui/sssd/params.rb:949 +msgid "Specify the number of records to retrieve from LDAP in a single request. Some LDAP servers enforce a maximum limit per-request." +msgstr "단일 요청으로 LDAP에서 검색할 레코드 수를 지정합니다. 일부 LDAP 서버는 요청당 최대한도를 적용합니다." -#: src/lib/authui/sssd/params.rb:954 +#: src/lib/authui/sssd/params.rb:954 msgid "Disable the LDAP paging control." msgstr "LDAP 페이징 컨트롤을 비활성화합니다." -#: src/lib/authui/sssd/params.rb:958 -msgid "" -"When communicating with an LDAP server using SASL, specify the minimum " -"security level necessary to establish the connection." -msgstr "" -"SASL을 사용하여 LDAP 서버와 통신하는 경우 연결을 설정하는 데 필요한 최소 보" -"안 수준을 지정합니다." +#: src/lib/authui/sssd/params.rb:958 +msgid "When communicating with an LDAP server using SASL, specify the minimum security level necessary to establish the connection." +msgstr "SASL을 사용하여 LDAP 서버와 통신하는 경우 연결을 설정하는 데 필요한 최소 보안 수준을 지정합니다." -#: src/lib/authui/sssd/params.rb:963 -msgid "" -"Specify the number of group members that must be missing from the internal " -"cache in order to trigger a dereference lookup." -msgstr "" -"역참조 조회를 트리거하기 위해 내부 캐시에서 누락되어야 하는 그룹 구성원 수를 " -"지정합니다." +#: src/lib/authui/sssd/params.rb:963 +msgid "Specify the number of group members that must be missing from the internal cache in order to trigger a dereference lookup." +msgstr "역참조 조회를 트리거하기 위해 내부 캐시에서 누락되어야 하는 그룹 구성원 수를 지정합니다." -#: src/lib/authui/sssd/params.rb:970 +#: src/lib/authui/sssd/params.rb:970 msgid "Validate server certification in LDAP TLS session" msgstr "LDAP TLS 세션의 서버 인증 검증" -#: src/lib/authui/sssd/params.rb:974 -msgid "" -"Specifies the file that contains certificates for all of the Certificate " -"Authorities that sssd will recognize." +#: src/lib/authui/sssd/params.rb:974 +msgid "Specifies the file that contains certificates for all of the Certificate Authorities that sssd will recognize." msgstr "sssd에서 인식할 모든 인증 기관의 인증서가 포함된 파일을 지정합니다." -#: src/lib/authui/sssd/params.rb:978 -msgid "" -"Specifies the path of a directory that contains Certificate Authority " -"certificates in separate individual files." -msgstr "" -"별도의 개별 파일에 인증 기관 인증서를 포함하는 디렉토리의 경로를 지정합니다." +#: src/lib/authui/sssd/params.rb:978 +msgid "Specifies the path of a directory that contains Certificate Authority certificates in separate individual files." +msgstr "별도의 개별 파일에 인증 기관 인증서를 포함하는 디렉토리의 경로를 지정합니다." -#: src/lib/authui/sssd/params.rb:982 +#: src/lib/authui/sssd/params.rb:982 msgid "Specifies the file that contains the certificate for the client's key." msgstr "클라이언트 키에 대한 인증서가 포함된 파일을 지정합니다." -#: src/lib/authui/sssd/params.rb:986 +#: src/lib/authui/sssd/params.rb:986 msgid "Specifies the file that contains the client's key." msgstr "클라이언트 키가 포함된 파일을 지정합니다." -#: src/lib/authui/sssd/params.rb:991 +#: src/lib/authui/sssd/params.rb:991 msgid "Specifies acceptable cipher suites." msgstr "허용되는 암호화 제품군을 지정합니다." -#: src/lib/authui/sssd/params.rb:996 -msgid "" -"Specifies that the id_provider connection must also use tls to protect the " -"channel." +#: src/lib/authui/sssd/params.rb:996 +msgid "Specifies that the id_provider connection must also use tls to protect the channel." msgstr "id_provider 연결에서 tls를 사용하여 채널을 보호해야 하도록 지정합니다." -#: src/lib/authui/sssd/params.rb:1001 -msgid "" -"Specifies that SSSD should attempt to map user and group IDs from the " -"ldap_user_objectsid and ldap_group_objectsid attributes instead of relying " -"on ldap_user_uid_number and ldap_group_gid_number." -msgstr "" -"SSSD에서 ldap_user_uid_number 및 ldap_group_gid_number를 사용하는 대신 " -"ldap_user_objectsid 및 ldap_group_objectsid 특성의 사용자 및 그룹 ID를 매핑해" -"야 하도록 지정합니다." +#: src/lib/authui/sssd/params.rb:1001 +msgid "Specifies that SSSD should attempt to map user and group IDs from the ldap_user_objectsid and ldap_group_objectsid attributes instead of relying on ldap_user_uid_number and ldap_group_gid_number." +msgstr "SSSD에서 ldap_user_uid_number 및 ldap_group_gid_number를 사용하는 대신 ldap_user_objectsid 및 ldap_group_objectsid 특성의 사용자 및 그룹 ID를 매핑해야 하도록 지정합니다." -#: src/lib/authui/sssd/params.rb:1005 +#: src/lib/authui/sssd/params.rb:1005 msgid "Specify the SASL mechanism to use." msgstr "사용할 SASL 메커니즘을 지정합니다." -#: src/lib/authui/sssd/params.rb:1010 +#: src/lib/authui/sssd/params.rb:1010 msgid "Specify the SASL authorization id to use." msgstr "사용할 SASL 인증 ID를 지정합니다." -#: src/lib/authui/sssd/params.rb:1015 +#: src/lib/authui/sssd/params.rb:1015 msgid "Specify the SASL realm to use." msgstr "사용할 SASL 영역을 지정합니다." -#: src/lib/authui/sssd/params.rb:1020 -msgid "" -"If set to true, the LDAP library would perform a reverse lookup to " -"canonicalize the host name during a SASL bind." -msgstr "" -"true로 설정된 경우 LDAP 라이브러리는 SASL 바인드 중 역방향 조회를 수행하여 호" -"스트 이름을 정규화합니다." +#: src/lib/authui/sssd/params.rb:1020 +msgid "If set to true, the LDAP library would perform a reverse lookup to canonicalize the host name during a SASL bind." +msgstr "true로 설정된 경우 LDAP 라이브러리는 SASL 바인드 중 역방향 조회를 수행하여 호스트 이름을 정규화합니다." -#: src/lib/authui/sssd/params.rb:1025 +#: src/lib/authui/sssd/params.rb:1025 msgid "Specify the keytab to use when using SASL/GSSAPI." msgstr "SASL/GSSAPI를 사용할 때 사용할 keytab을 지정합니다." -#: src/lib/authui/sssd/params.rb:1030 +#: src/lib/authui/sssd/params.rb:1030 msgid "Specifies that the id_provider should init Kerberos credentials (TGT)." -msgstr "" -"id_provider에서 Kerberos 자격 증명(TGT)을 초기화해야 하도록 지정합니다." +msgstr "id_provider에서 Kerberos 자격 증명(TGT)을 초기화해야 하도록 지정합니다." -#: src/lib/authui/sssd/params.rb:1035 +#: src/lib/authui/sssd/params.rb:1035 msgid "Specifies the lifetime in seconds of the TGT if GSSAPI is used." msgstr "GSSAPI가 사용되는 경우 TGT의 수명(초)을 지정합니다." -#: src/lib/authui/sssd/params.rb:1040 -msgid "" -"Select the policy to evaluate the password expiration on the client side." +#: src/lib/authui/sssd/params.rb:1040 +msgid "Select the policy to evaluate the password expiration on the client side." msgstr "클라이언트 쪽의 비밀번호 만료를 평가할 정책을 선택합니다." -#: src/lib/authui/sssd/params.rb:1045 +#: src/lib/authui/sssd/params.rb:1045 msgid "Specifies whether automatic referral chasing should be enabled." msgstr "자동 조회 추적을 활성화할지 여부를 지정합니다." -#: src/lib/authui/sssd/params.rb:1050 +#: src/lib/authui/sssd/params.rb:1050 msgid "Specifies the service name to use when service discovery is enabled." msgstr "서비스 검색이 활성화된 경우 사용할 서비스 이름을 지정합니다." -#: src/lib/authui/sssd/params.rb:1054 -msgid "" -"Specifies the service name to use to find an LDAP server which allows " -"password changes when service discovery is enabled." -msgstr "" -"서비스 검색이 활성화된 경우 비밀번호 변경을 허용하는 LDAP 서버를 찾기 위해 사" -"용할 서비스 이름을 지정합니다." +#: src/lib/authui/sssd/params.rb:1054 +msgid "Specifies the service name to use to find an LDAP server which allows password changes when service discovery is enabled." +msgstr "서비스 검색이 활성화된 경우 비밀번호 변경을 허용하는 LDAP 서버를 찾기 위해 사용할 서비스 이름을 지정합니다." -#: src/lib/authui/sssd/params.rb:1059 -msgid "" -"Specifies whether to update the ldap_user_shadow_last_change attribute with " -"days since the Epoch after a password change operation." -msgstr "" -"비밀번호 변경 작업 후 ldap_user_shadow_last_change 특성을 Epoch 이후 일수로 " -"업데이트할지 여부를 지정합니다." +#: src/lib/authui/sssd/params.rb:1059 +msgid "Specifies whether to update the ldap_user_shadow_last_change attribute with days since the Epoch after a password change operation." +msgstr "비밀번호 변경 작업 후 ldap_user_shadow_last_change 특성을 Epoch 이후 일수로 업데이트할지 여부를 지정합니다." -#: src/lib/authui/sssd/params.rb:1064 -msgid "" -"If using access_provider = ldap and ldap_access_order = filter (default), " -"this option is mandatory. It specifies an LDAP search filter criterion that " -"must be met for the user to be granted access on this host." -msgstr "" -"access_provider = ldap 및 ldap_access_order = filter(기본값)를 사용하는 경우 " -"이 옵션은 필수입니다. 이 호스트에서 사용자에게 권한이 부여되기 위해 충족해야 " -"하는 LDAP 검색 필터 조건을 지정합니다." +#: src/lib/authui/sssd/params.rb:1064 +msgid "If using access_provider = ldap and ldap_access_order = filter (default), this option is mandatory. It specifies an LDAP search filter criterion that must be met for the user to be granted access on this host." +msgstr "access_provider = ldap 및 ldap_access_order = filter(기본값)를 사용하는 경우 이 옵션은 필수입니다. 이 호스트에서 사용자에게 권한이 부여되기 위해 충족해야 하는 LDAP 검색 필터 조건을 지정합니다." -#: src/lib/authui/sssd/params.rb:1069 -msgid "" -" With this option a client side evaluation of access control attributes can " -"be enabled." -msgstr "" -" 이 옵션을 사용하면 액세스 제어 특성의 클라이언트 쪽 평가를 활성화할 수 있습" -"니다." +#: src/lib/authui/sssd/params.rb:1069 +msgid " With this option a client side evaluation of access control attributes can be enabled." +msgstr " 이 옵션을 사용하면 액세스 제어 특성의 클라이언트 쪽 평가를 활성화할 수 있습니다." -#: src/lib/authui/sssd/params.rb:1075 +#: src/lib/authui/sssd/params.rb:1075 msgid "Comma separated list of access control options." msgstr "액세스 제어 옵션의 쉼표로 구분된 목록입니다." -#: src/lib/authui/sssd/params.rb:1080 +#: src/lib/authui/sssd/params.rb:1080 msgid "Specifies how alias dereferencing is done when performing a search." msgstr "검색을 수행할 때 별칭 역참조가 수행되는 방법을 지정합니다." -#: src/lib/authui/sssd/params.rb:1085 -msgid "" -"Allows to retain local users as members of an LDAP group for servers that " -"use the RFC2307 schema." -msgstr "" -"RFC2307 스키마를 사용하는 서버에 대해 로컬 사용자를 LDAP 그룹의 구성원으로 유" -"지할 수 있게 합니다." +#: src/lib/authui/sssd/params.rb:1085 +msgid "Allows to retain local users as members of an LDAP group for servers that use the RFC2307 schema." +msgstr "RFC2307 스키마를 사용하는 서버에 대해 로컬 사용자를 LDAP 그룹의 구성원으로 유지할 수 있게 합니다." -#: src/lib/authui/sssd/params.rb:1090 -msgid "" -"An optional base DN, search scope and LDAP filter to restrict LDAP autofs " -"searches for this attribute type. The default value is ldap_search_base." -msgstr "" -"이 특성 유형에 대한 LDAP autofs 검색을 제한하는 선택적 기본 DN, 검색 범위 " -"및 LDAP 필터입니다." +#: src/lib/authui/sssd/params.rb:1090 +msgid "An optional base DN, search scope and LDAP filter to restrict LDAP autofs searches for this attribute type. The default value is ldap_search_base." +msgstr "이 특성 유형에 대한 LDAP autofs 검색을 제한하는 선택적 기본 DN, 검색 범위 및 LDAP 필터입니다." -#: src/lib/authui/sssd/params.rb:1095 -msgid "" -"An optional base DN, search scope and LDAP filter to restrict LDAP group " -"searches for this attribute type. The default value is ldap_search_base." -msgstr "" -"이 특성 유형에 대한 LDAP 그룹 검색을 제한하는 선택적 기본 DN, 검색 범위 및 " -"LDAP 필터입니다." +#: src/lib/authui/sssd/params.rb:1095 +msgid "An optional base DN, search scope and LDAP filter to restrict LDAP group searches for this attribute type. The default value is ldap_search_base." +msgstr "이 특성 유형에 대한 LDAP 그룹 검색을 제한하는 선택적 기본 DN, 검색 범위 및 LDAP 필터입니다." -#: src/lib/authui/sssd/params.rb:1100 -msgid "" -"An optional base DN, search scope and LDAP filter to restrict LDAP netgroup " -"searches for this attribute type. The default value is ldap_search_base." -msgstr "" -"이 특성 유형에 대한 LDAP netgroup 검색을 제한하는 선택적 기본 DN, 검색 범위 " -"및 LDAP 필터입니다." +#: src/lib/authui/sssd/params.rb:1100 +msgid "An optional base DN, search scope and LDAP filter to restrict LDAP netgroup searches for this attribute type. The default value is ldap_search_base." +msgstr "이 특성 유형에 대한 LDAP netgroup 검색을 제한하는 선택적 기본 DN, 검색 범위 및 LDAP 필터입니다." -#: src/lib/authui/sssd/params.rb:1105 -msgid "" -"An optional base DN, search scope and LDAP filter to restrict LDAP user " -"searches for this attribute type. The default value is ldap_search_base." -msgstr "" -"이 특성 유형에 대한 LDAP 사용자 검색을 제한하는 선택적 기본 DN, 검색 범위 및 " -"LDAP 필터입니다." +#: src/lib/authui/sssd/params.rb:1105 +msgid "An optional base DN, search scope and LDAP filter to restrict LDAP user searches for this attribute type. The default value is ldap_search_base." +msgstr "이 특성 유형에 대한 LDAP 사용자 검색을 제한하는 선택적 기본 DN, 검색 범위 및 LDAP 필터입니다." -#: src/lib/authui/sssd/params.rb:1110 src/lib/authui/sssd/params.rb:1120 +#: src/lib/authui/sssd/params.rb:1110 src/lib/authui/sssd/params.rb:1120 msgid "The object class of an automount map entry in LDAP." msgstr "LDAP에 있는 자동 마운트 맵 항목의 객체 클래스입니다." -#: src/lib/authui/sssd/params.rb:1115 +#: src/lib/authui/sssd/params.rb:1115 msgid "The name of an automount map entry in LDAP." msgstr "LDAP에 있는 자동 마운트 맵 항목의 이름입니다." -#: src/lib/authui/sssd/params.rb:1125 src/lib/authui/sssd/params.rb:1130 -msgid "" -"The key of an automount entry in LDAP. The entry usually corresponds to a " -"mount point." -msgstr "" -"LDAP에 있는 자동 마운트 항목의 키입니다. 이 항목은 일반적으로 마운트 포인트" -"에 해당합니다." +#: src/lib/authui/sssd/params.rb:1125 src/lib/authui/sssd/params.rb:1130 +msgid "The key of an automount entry in LDAP. The entry usually corresponds to a mount point." +msgstr "LDAP에 있는 자동 마운트 항목의 키입니다. 이 항목은 일반적으로 마운트 포인트에 해당합니다." -#: src/lib/authui/sssd/params.rb:1143 +#: src/lib/authui/sssd/params.rb:1143 msgid "IP address or host names of Kerberos servers (comma separated)" msgstr "Kerberos 서버의 IP 주소 또는 호스트 이름(쉼표로 구분)" -#: src/lib/authui/sssd/params.rb:1147 -msgid "" -"Specifies the comma-separated list of IP addresses or hostnames of the " -"Kerberos servers to which SSSD should connect, in the order of preference." -msgstr "" -"SSSD에서 기본 설정 순으로 연결해야 하는 Kerberos 서버 IP 주소 또는 호스트 이" -"름의 쉼표로 구분된 목록을 지정합니다." +#: src/lib/authui/sssd/params.rb:1147 +msgid "Specifies the comma-separated list of IP addresses or hostnames of the Kerberos servers to which SSSD should connect, in the order of preference." +msgstr "SSSD에서 기본 설정 순으로 연결해야 하는 Kerberos 서버 IP 주소 또는 호스트 이름의 쉼표로 구분된 목록을 지정합니다." -#: src/lib/authui/sssd/params.rb:1152 +#: src/lib/authui/sssd/params.rb:1152 msgid "Kerberos realm (e.g. EXAMPLE.COM)" msgstr "Kerberos 영역(예: EXAMPLE.COM)" -#: src/lib/authui/sssd/params.rb:1156 src/lib/authui/sssd/params.rb:1161 -msgid "" -"If the change password service is not running on the KDC, alternative " -"servers can be defined here." -msgstr "" -"비밀번호 변경 서비스가 KDC에서 실행되고 있지 않은 경우 여기서 대체 서버를 정" -"의할 수 있습니다." +#: src/lib/authui/sssd/params.rb:1156 src/lib/authui/sssd/params.rb:1161 +msgid "If the change password service is not running on the KDC, alternative servers can be defined here." +msgstr "비밀번호 변경 서비스가 KDC에서 실행되고 있지 않은 경우 여기서 대체 서버를 정의할 수 있습니다." -#: src/lib/authui/sssd/params.rb:1166 +#: src/lib/authui/sssd/params.rb:1166 msgid "Directory to store credential caches." msgstr "자격 증명 캐시를 저장할 디렉토리입니다." -#: src/lib/authui/sssd/params.rb:1171 +#: src/lib/authui/sssd/params.rb:1171 msgid "Location of the user's credential cache." msgstr "사용자의 자격 증명 캐시 위치입니다." -#: src/lib/authui/sssd/params.rb:1176 -msgid "" -" Timeout in seconds after an online authentication request or change " -"password request is aborted." -msgstr "" -" 온라인 인증 요청 또는 비밀번호 변경 요청이 중단되는 제한 시간(초)입니다." +#: src/lib/authui/sssd/params.rb:1176 +msgid " Timeout in seconds after an online authentication request or change password request is aborted." +msgstr " 온라인 인증 요청 또는 비밀번호 변경 요청이 중단되는 제한 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:1181 -msgid "" -"Verify with the help of krb5_keytab that the TGT obtained has not been " -"spoofed." -msgstr "" -"krb5_keytab 도움말을 사용하여 가져온 TGT가 스푸핑되지 않았는지 확인합니다." +#: src/lib/authui/sssd/params.rb:1181 +msgid "Verify with the help of krb5_keytab that the TGT obtained has not been spoofed." +msgstr "krb5_keytab 도움말을 사용하여 가져온 TGT가 스푸핑되지 않았는지 확인합니다." -#: src/lib/authui/sssd/params.rb:1186 -msgid "" -"The location of the keytab to use when validating credentials obtained from " -"KDCs." +#: src/lib/authui/sssd/params.rb:1186 +msgid "The location of the keytab to use when validating credentials obtained from KDCs." msgstr "KDC에서 가져온 자격 증명을 확인할 때 사용할 keytab의 위치입니다." -#: src/lib/authui/sssd/params.rb:1191 -msgid "" -"Store the password of the user if the provider is offline and use it to " -"request a TGT when the provider comes online again." -msgstr "" -"공급자가 오프라인 상태인 경우 사용자의 비밀번호를 저장하고 공급자가 다시 온라" -"인 상태가 되면 TGT를 요청하는 데 사용합니다." +#: src/lib/authui/sssd/params.rb:1191 +msgid "Store the password of the user if the provider is offline and use it to request a TGT when the provider comes online again." +msgstr "공급자가 오프라인 상태인 경우 사용자의 비밀번호를 저장하고 공급자가 다시 온라인 상태가 되면 TGT를 요청하는 데 사용합니다." -#: src/lib/authui/sssd/params.rb:1195 -msgid "" -"Request a renewable ticket with a total lifetime, given as an integer " -"immediately followed by a time unit." -msgstr "" -"정수와 바로 뒤에 오는 시간 단위로 제공된 총 수명을 가진 갱신 가능 티켓을 요청" -"합니다." +#: src/lib/authui/sssd/params.rb:1195 +msgid "Request a renewable ticket with a total lifetime, given as an integer immediately followed by a time unit." +msgstr "정수와 바로 뒤에 오는 시간 단위로 제공된 총 수명을 가진 갱신 가능 티켓을 요청합니다." -#: src/lib/authui/sssd/params.rb:1199 -msgid "" -"Request ticket with a with a lifetime, given as an integer immediately " -"followed by a time unit." -msgstr "" -"정수와 바로 뒤에 오는 시간 단위로 제공된 수명을 가진 티켓을 요청합니다." +#: src/lib/authui/sssd/params.rb:1199 +msgid "Request ticket with a with a lifetime, given as an integer immediately followed by a time unit." +msgstr "정수와 바로 뒤에 오는 시간 단위로 제공된 수명을 가진 티켓을 요청합니다." -#: src/lib/authui/sssd/params.rb:1203 +#: src/lib/authui/sssd/params.rb:1203 msgid "The time in seconds between two checks if the TGT should be renewed." msgstr "TGT를 갱신해야 하는 경우 두 검사 사이의 시간(초)입니다." -#: src/lib/authui/sssd/params.rb:1208 -msgid "" -"Enables flexible authentication secure tunneling (FAST) for Kerberos pre-" -"authentication." -msgstr "" -"Kerberos 사전 인증에 대해 FAST(유연한 인증 보안 터널링)를 활성화합니다." +#: src/lib/authui/sssd/params.rb:1208 +msgid "Enables flexible authentication secure tunneling (FAST) for Kerberos pre-authentication." +msgstr "Kerberos 사전 인증에 대해 FAST(유연한 인증 보안 터널링)를 활성화합니다." -#: src/lib/authui/sssd/params.rb:1212 +#: src/lib/authui/sssd/params.rb:1212 msgid "Specifies the server principal to use for FAST." msgstr "FAST에 사용할 서버 사용자를 지정합니다." -#: src/lib/authui/sssd/params.rb:1217 +#: src/lib/authui/sssd/params.rb:1217 msgid "Specifies if the host and user principal should be canonicalized." msgstr "호스트 및 사용자 계정을 정규화할지 여부를 지정합니다." -#. The Active Directory domain section -#: src/lib/authui/sssd/params.rb:1229 +#. The Active Directory domain section +#: src/lib/authui/sssd/params.rb:1229 msgid "Specifies the name of the Active Directory domain." msgstr "Active Directory 도메인의 이름을 지정합니다." -#: src/lib/authui/sssd/params.rb:1234 +#: src/lib/authui/sssd/params.rb:1234 msgid "Host names of AD servers (comma separated)." msgstr "AD 서버의 호스트 이름(쉼표로 구분)" -#: src/lib/authui/sssd/params.rb:1238 +#: src/lib/authui/sssd/params.rb:1238 msgid "Host names of backup AD servers (comma separated)." msgstr "AD 서버의 호스트 이름(쉼표로 구분)" -#: src/lib/authui/sssd/params.rb:1243 -msgid "" -"AD hostname (optional) - may be set if hostname(5) does not reflect the FQDN " -"used by AD to identify this host." -msgstr "" -"AD 호스트 이름(선택 사항) - hostname(5)에 AD가 이 호스트를 식별하는 데 사용하" -"는 FQDN이 반영되지 않은 경우 설정할 수 있습니다." +#: src/lib/authui/sssd/params.rb:1243 +msgid "AD hostname (optional) - may be set if hostname(5) does not reflect the FQDN used by AD to identify this host." +msgstr "AD 호스트 이름(선택 사항) - hostname(5)에 AD가 이 호스트를 식별하는 데 사용하는 FQDN이 반영되지 않은 경우 설정할 수 있습니다." -#: src/lib/authui/sssd/params.rb:1247 +#: src/lib/authui/sssd/params.rb:1247 msgid "Override the user's home directory." msgstr "사용자의 홈 디렉토리를 무효화합니다." -#: src/lib/authui/sssd/params.rb:1260 -msgid "" -" Specifies the lower bound of the range of POSIX IDs to use for mapping " -"Active Directory user and group SIDs." -msgstr "" -" Active Directory 사용자 및 그룹 SID 매핑에 사용할 POSIX ID 범위의 하한을 지" -"정합니다." +#: src/lib/authui/sssd/params.rb:1260 +msgid " Specifies the lower bound of the range of POSIX IDs to use for mapping Active Directory user and group SIDs." +msgstr " Active Directory 사용자 및 그룹 SID 매핑에 사용할 POSIX ID 범위의 하한을 지정합니다." -#: src/lib/authui/sssd/params.rb:1265 -msgid "" -"Specifies the upper bound of the range of POSIX IDs to use for mapping " -"Active Directory user and group SIDs." -msgstr "" -"Active Directory 사용자 및 그룹 SID 매핑에 사용할 POSIX ID 범위의 상한을 지정" -"합니다." +#: src/lib/authui/sssd/params.rb:1265 +msgid "Specifies the upper bound of the range of POSIX IDs to use for mapping Active Directory user and group SIDs." +msgstr "Active Directory 사용자 및 그룹 SID 매핑에 사용할 POSIX ID 범위의 상한을 지정합니다." -#: src/lib/authui/sssd/params.rb:1270 +#: src/lib/authui/sssd/params.rb:1270 msgid "Specifies the number of IDs available for each slice." msgstr "각 슬라이스에 사용 가능한 ID 수를 지정합니다." -#: src/lib/authui/sssd/params.rb:1274 +#: src/lib/authui/sssd/params.rb:1274 msgid "Specify the domain SID of the default domain." msgstr "기본 도메인의 도메인 SID를 지정합니다." -#: src/lib/authui/sssd/params.rb:1278 +#: src/lib/authui/sssd/params.rb:1278 msgid "Specify the name of the default domain." msgstr "기본 도메인의 이름을 지정합니다." -#: src/lib/authui/sssd/params.rb:1283 -msgid "" -"Changes the behavior of the ID-mapping algorithm to behave more similarly to " -"winbind's “idmap_autorid” algorithm." -msgstr "" -"winbind의 “idmap_autorid” 알고리즘과 더 유사하게 동작하도록 ID 매핑 알고리즘" -"의 동작을 변경합니다." +#: src/lib/authui/sssd/params.rb:1283 +msgid "Changes the behavior of the ID-mapping algorithm to behave more similarly to winbind's “idmap_autorid” algorithm." +msgstr "winbind의 “idmap_autorid” 알고리즘과 더 유사하게 동작하도록 ID 매핑 알고리즘의 동작을 변경합니다." -#. The Active Directory domain section -#: src/lib/authui/sssd/params.rb:1295 +#. The Active Directory domain section +#: src/lib/authui/sssd/params.rb:1295 msgid "Specifies the name of the IPA domain." msgstr "IPA 도메인의 이름을 지정합니다." -#: src/lib/authui/sssd/params.rb:1300 +#: src/lib/authui/sssd/params.rb:1300 msgid "IP addresses or host names of IPA servers (comma separated)" msgstr "IPA 서버의 IP 주소 또는 호스트 이름(쉼표로 구분)" -#: src/lib/authui/sssd/params.rb:1305 -msgid "" -"IPA hostname (optional) - may be set if hostname(5) does not reflect the " -"FQDN used by IPA to identify this host." -msgstr "" -"IPA 호스트 이름(선택 사항) - 호스트 이름(5)에 IPA가 이 호스트를 식별하는 데 " -"사용하는 FQDN이 반영되지 않은 경우 설정할 수 있습니다." +#: src/lib/authui/sssd/params.rb:1305 +msgid "IPA hostname (optional) - may be set if hostname(5) does not reflect the FQDN used by IPA to identify this host." +msgstr "IPA 호스트 이름(선택 사항) - 호스트 이름(5)에 IPA가 이 호스트를 식별하는 데 사용하는 FQDN이 반영되지 않은 경우 설정할 수 있습니다." -#: src/lib/authui/sssd/params.rb:1310 +#: src/lib/authui/sssd/params.rb:1310 msgid "The automounter location this IPA client will be using." msgstr "이 IPA 클라이언트가 사용할 자동 탑재 프로그램의 위치." -#: src/lib/authui/sssd/params.rb:1315 -msgid "" -"This option tells SSSD to automatically update the DNS server built into " -"FreeIPA v2 with the IP address of this client." -msgstr "" -"이 옵션은 SSSD에 이 클라이언트의 IP 주소를 사용하여 FreeIPA v2에 빌드된 DNS " -"서버를 자동으로 업데이트하도록 지정합니다." +#: src/lib/authui/sssd/params.rb:1315 +msgid "This option tells SSSD to automatically update the DNS server built into FreeIPA v2 with the IP address of this client." +msgstr "이 옵션은 SSSD에 이 클라이언트의 IP 주소를 사용하여 FreeIPA v2에 빌드된 DNS 서버를 자동으로 업데이트하도록 지정합니다." -#: src/lib/authui/sssd/params.rb:1320 +#: src/lib/authui/sssd/params.rb:1320 msgid "The TTL to apply to the client DNS record when updating it." msgstr "업데이트 시 클라이언트 DNS 레코드에 적용할 TTL입니다." -#: src/lib/authui/sssd/params.rb:1324 -msgid "" -"Choose the interface whose IP address should be used for dynamic DNS updates." +#: src/lib/authui/sssd/params.rb:1324 +msgid "Choose the interface whose IP address should be used for dynamic DNS updates." msgstr "동적 DNS 업데이트에 사용해야 하는 IP 주소의 인터페이스를 선택하십시오." Modified: branches/SLE12-SP3/yast/ko/po/auth-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/auth-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/auth-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,181 +14,173 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xldap-server module -#: src/clients/auth-server.rb:37 +#. Command line help text for the Xldap-server module +#: src/clients/auth-server.rb:37 msgid "Configuration of Authentication server" msgstr "인증 서버 구성" -#: src/clients/auth-server.rb:49 +#: src/clients/auth-server.rb:49 msgid "Enable/Disable the service" msgstr "서비스 활성화/비활성화" -#: src/clients/auth-server.rb:53 +#: src/clients/auth-server.rb:53 msgid "Add a new database" msgstr "새 데이터베이스 추가" -#: src/clients/auth-server.rb:60 +#: src/clients/auth-server.rb:60 msgid "Show a list of currently available databases" msgstr "현재 사용 가능한 데이터베이스 목록 표시" -#: src/clients/auth-server.rb:64 +#: src/clients/auth-server.rb:64 msgid "Show a list of currently configured schemas" msgstr "현재 구성된 스키마 목록 표시" -#: src/clients/auth-server.rb:68 +#: src/clients/auth-server.rb:68 msgid "Add a schema to the list" msgstr "목록에 스키마 추가" -#: src/clients/auth-server.rb:72 +#: src/clients/auth-server.rb:72 msgid "Enable the service" msgstr "서비스 활성화" -#: src/clients/auth-server.rb:73 +#: src/clients/auth-server.rb:73 msgid "Disable the service" msgstr "서비스 비활성화" -#: src/clients/auth-server.rb:75 +#: src/clients/auth-server.rb:75 msgid "Database type (\"hdb\" or \"bdb\")" msgstr "데이터베이스 유형(\"hdb\" 또는 \"bdb\")" -#: src/clients/auth-server.rb:79 +#: src/clients/auth-server.rb:79 msgid "Base DN for the database" msgstr "데이터베이스의 기본 DN" -#: src/clients/auth-server.rb:83 +#: src/clients/auth-server.rb:83 msgid "DN for the administrator login" msgstr "관리자 로그인 DN" -#: src/clients/auth-server.rb:87 +#: src/clients/auth-server.rb:87 msgid "Administrator password" msgstr "관리자 비밀번호" -#: src/clients/auth-server.rb:95 +#: src/clients/auth-server.rb:95 msgid "Directory for the database" msgstr "데이터베이스 디렉토리" -#: src/clients/auth-server.rb:98 +#: src/clients/auth-server.rb:98 msgid "File" msgstr "파일" -#: src/clients/auth-server.rb:99 +#: src/clients/auth-server.rb:99 msgid "Position" msgstr "직위" -#. map edb = LdapServer::ReadDatabase(); -#. y2milestone("DBs: %1", edb); -#. -#: src/clients/auth-server.rb:192 +#. map edb = LdapServer::ReadDatabase(); +#. y2milestone("DBs: %1", edb); +#. +#: src/clients/auth-server.rb:192 msgid "No base DN provided\n" msgstr "지정된 베이스 DN이 없습니다.\n" -#: src/clients/auth-server.rb:209 +#: src/clients/auth-server.rb:209 msgid "Database cannot be created when the service is not enabled" msgstr "서비스가 활성화되어 있지 않으면 데이터베이스를 생성할 수 없습니다." -#. y2milestone("db-options : %1", db); -#: src/clients/auth-server.rb:219 +#. y2milestone("db-options : %1", db); +#: src/clients/auth-server.rb:219 msgid "Error while adding the database" msgstr "데이터베이스를 추가하는 중에 오류가 발생했습니다." -#. error popup -#. error popup -#: src/clients/auth-server_proposal.rb:58 -#: src/clients/auth-server_proposal.rb:228 -msgid "" -"The LDAP database has already been created. You can change the settings " -"later in the installed system." -msgstr "" -"LDAP 데이터베이스는 이미 생성되었습니다. 설치된 시스템에서 나중에 설정을 변경" -"할 수 있습니다." +#. error popup +#. error popup +#: src/clients/auth-server_proposal.rb:58 +#: src/clients/auth-server_proposal.rb:228 +msgid "The LDAP database has already been created. You can change the settings later in the installed system." +msgstr "LDAP 데이터베이스는 이미 생성되었습니다. 설치된 시스템에서 나중에 설정을 변경할 수 있습니다." -#. y2error( "sysconfig var is '%1'", SCR::Read( .sysconfig.openldap.OPENLDAP_REGISTER_SLP ) ); -#: src/clients/auth-server_proposal.rb:101 +#. y2error( "sysconfig var is '%1'", SCR::Read( .sysconfig.openldap.OPENLDAP_REGISTER_SLP ) ); +#: src/clients/auth-server_proposal.rb:101 msgid "[root password]" msgstr "루트 비밀번호" -#: src/clients/auth-server_proposal.rb:103 +#: src/clients/auth-server_proposal.rb:103 msgid "[manually set]" msgstr "[수동으로 설정]" -#: src/clients/auth-server_proposal.rb:106 -msgid "" -"Unable to retrieve the system root password. Set an LDAP server password to " -"continue." -msgstr "" -"시스템 루트 비밀번호를 검색할 수 없습니다. 계속하려면 LDAP 서버 비밀번호를 설" -"정하십시오." +#: src/clients/auth-server_proposal.rb:106 +msgid "Unable to retrieve the system root password. Set an LDAP server password to continue." +msgstr "시스템 루트 비밀번호를 검색할 수 없습니다. 계속하려면 LDAP 서버 비밀번호를 설정하십시오." -#: src/clients/auth-server_proposal.rb:112 +#: src/clients/auth-server_proposal.rb:112 msgid "Setting up LDAP Master Server:" msgstr "LDAP 마스터 서버 설정 중:" -#: src/clients/auth-server_proposal.rb:114 +#: src/clients/auth-server_proposal.rb:114 msgid "Setting up standalone LDAP Server:" msgstr "독립 실행형 LDAP 서버 설정 중:" -#: src/clients/auth-server_proposal.rb:121 +#: src/clients/auth-server_proposal.rb:121 msgid "Base DN: " msgstr "베이스 DN:" -#: src/clients/auth-server_proposal.rb:125 +#: src/clients/auth-server_proposal.rb:125 msgid "Root DN: " msgstr "루트 DN:" -#: src/clients/auth-server_proposal.rb:128 +#: src/clients/auth-server_proposal.rb:128 msgid "LDAP Password: " msgstr "LDAP 비밀번호:" -#: src/clients/auth-server_proposal.rb:135 +#: src/clients/auth-server_proposal.rb:135 msgid "Setting up LDAP Slave Server" msgstr "LDAP 슬레이브 서버 설정 중" -#: src/clients/auth-server_proposal.rb:143 +#: src/clients/auth-server_proposal.rb:143 msgid "Provider: " msgstr "서비스 제공자:" -#. all known interfaces for testing -#: src/clients/auth-server_proposal.rb:185 +#. all known interfaces for testing +#: src/clients/auth-server_proposal.rb:185 msgid "Open Port in Firewall" msgstr "방화벽 포트 열기" -#: src/clients/auth-server_proposal.rb:188 -#: src/clients/auth-server_proposal.rb:203 +#: src/clients/auth-server_proposal.rb:188 +#: src/clients/auth-server_proposal.rb:203 msgid "YES" msgstr "확인" -#: src/clients/auth-server_proposal.rb:190 -#: src/clients/auth-server_proposal.rb:204 -#: src/clients/auth-server_proposal.rb:212 +#: src/clients/auth-server_proposal.rb:190 +#: src/clients/auth-server_proposal.rb:204 +#: src/clients/auth-server_proposal.rb:212 msgid "NO" msgstr "취소" -#: src/clients/auth-server_proposal.rb:194 +#: src/clients/auth-server_proposal.rb:194 msgid "Firewall is disabled" msgstr "방화벽이 비활성화되었습니다." -#: src/clients/auth-server_proposal.rb:200 +#: src/clients/auth-server_proposal.rb:200 msgid "Register at SLP Daemon: " msgstr "SLP 데몬에서 등록:" -#: src/clients/auth-server_proposal.rb:212 src/modules/AuthServer.pm:2192 +#: src/clients/auth-server_proposal.rb:212 src/modules/AuthServer.pm:2192 msgid "Start LDAP Server: " msgstr "LDAP 서버 시작:" -#. Rich text title for LdapServer in proposals -#: src/clients/auth-server_proposal.rb:253 +#. Rich text title for LdapServer in proposals +#: src/clients/auth-server_proposal.rb:253 msgid "OpenLDAP Server" msgstr "OpenLDAP 서버" -#. Menu title for LdapServer in proposals -#: src/clients/auth-server_proposal.rb:257 +#. Menu title for LdapServer in proposals +#: src/clients/auth-server_proposal.rb:257 msgid "Open&LDAP Server" msgstr "OpenLDAP 서버(&L)" -#. translators: error popup before aborting the module -#. translators: error popup before aborting the module -#: src/clients/auth-server_proposal.rb:280 -#: src/include/auth-server/complex.rb:53 +#. translators: error popup before aborting the module +#. translators: error popup before aborting the module +#: src/clients/auth-server_proposal.rb:280 +#: src/include/auth-server/complex.rb:53 msgid "" "The package '%1' is not available.\n" "YaST2 cannot continue the configuration\n" @@ -198,10 +190,10 @@ "이 패키지를 설치하지 않으면 YaST2에서 구성을\n" " 계속할 수 없습니다." -#. translators: error popup before aborting the module -#. translators: error popup before aborting the module -#: src/clients/auth-server_proposal.rb:291 -#: src/include/auth-server/complex.rb:64 +#. translators: error popup before aborting the module +#. translators: error popup before aborting the module +#: src/clients/auth-server_proposal.rb:291 +#: src/include/auth-server/complex.rb:64 msgid "" "YaST2 cannot continue the configuration\n" "without installing the required packages." @@ -209,13 +201,11 @@ "필요한 패키지를 설치하지 않으면 YaST2에서\n" "구성 작업을 계속할 수 없습니다." -#: src/clients/auth-server_proposal.rb:309 -msgid "" -"OpenLDAP Replication Setup failed. Reconfigure after the installation has " -"finished." +#: src/clients/auth-server_proposal.rb:309 +msgid "OpenLDAP Replication Setup failed. Reconfigure after the installation has finished." msgstr "OpenLDAP 복제 설정에 실패했습니다. 설치가 완료된 후 재구성하십시오." -#: src/clients/auth-server_proposal.rb:344 +#: src/clients/auth-server_proposal.rb:344 msgid "" "OpenLDAP Server: Common server certificate not available.\n" "StartTLS is disabled." @@ -223,44 +213,42 @@ "OpenLDAP 서버: 일반 서버 인증서를 사용할 수 없습니다.\n" "StartTLS가 비활성화됩니다." -#. Command line help text for the Xldap-server module -#: src/clients/openldap-mirrormode.rb:36 +#. Command line help text for the Xldap-server module +#: src/clients/openldap-mirrormode.rb:36 msgid "Configuration of OpenLDAP MirrorMode replication" msgstr "OpenLDAP MirrorMode 복제 구성" -#. Start new config wizward -#: src/include/auth-server/complex.rb:106 +#. Start new config wizward +#: src/include/auth-server/complex.rb:106 msgid "Existing configuration detected." msgstr "기존 구성이 감지되었습니다." -#: src/include/auth-server/complex.rb:107 +#: src/include/auth-server/complex.rb:107 msgid "" -"You have an existing configuration, but the LDAP server is currently not " -"running.\n" -"Do you want to start the server now and re-read its configuration data or do " -"you \n" +"You have an existing configuration, but the LDAP server is currently not running.\n" +"Do you want to start the server now and re-read its configuration data or do you \n" "want to create a new configuration from scratch?" msgstr "" "기존 구성이 있지만 LDAP 서버가 현재 실행 중이 아닙니다.\n" "지금 서버를 시작하고 구성 데이터를 다시 읽으시겠습니까, \n" "아니면 처음부터 새 구성을 생성하시겠습니까?" -#: src/include/auth-server/complex.rb:112 -#: src/include/auth-server/dialogs.rb:202 +#: src/include/auth-server/complex.rb:112 +#: src/include/auth-server/dialogs.rb:202 msgid "Restart" msgstr "다시 시작" -#: src/include/auth-server/complex.rb:114 -#: src/include/auth-server/dialogs.rb:203 +#: src/include/auth-server/complex.rb:114 +#: src/include/auth-server/dialogs.rb:203 msgid "New Configuration" msgstr "새 구성" -#. Start new config wizward -#: src/include/auth-server/complex.rb:134 +#. Start new config wizward +#: src/include/auth-server/complex.rb:134 msgid "Migrate existing Configuration" msgstr "기존 구성 마이그레이션" -#: src/include/auth-server/complex.rb:135 +#: src/include/auth-server/complex.rb:135 msgid "" "Your system is currently configured to use the configuration file\n" "/etc/openldap/slapd.conf. YaST only supports the dynamic configuration\n" @@ -269,104 +257,96 @@ msgstr "" "시스템이 현재 구성 파일\n" "/etc/openldap/slapd.conf를 사용하도록 구성되었습니다. YaST는 OpenLDAP의\n" -"동적 구성 데이터베이스(back-config)만 지원합니다. 기존 구성을 구성 데이터베이" -"스로\n" +"동적 구성 데이터베이스(back-config)만 지원합니다. 기존 구성을 구성 데이터베이스로\n" "마이그레이션하시겠습니까?\n" -#: src/include/auth-server/complex.rb:148 +#: src/include/auth-server/complex.rb:148 msgid "Migrate existing configuration" msgstr "기존 구성 마이그레이션" -#: src/include/auth-server/complex.rb:151 +#: src/include/auth-server/complex.rb:151 msgid "Create a new configuration from scratch" msgstr "새 구성을 처음부터 생성" -#. LdapServer summary dialog caption -#: src/include/auth-server/complex.rb:231 +#. LdapServer summary dialog caption +#: src/include/auth-server/complex.rb:231 msgid "Authentication Server Configuration Summary" msgstr "인증 서버 구성 요약" -#. heading for all dialogs -#. FIXME: adapt to your needs -#. Initialization dialog caption -#. Initialization dialog caption -#. Initialization dialog caption -#: src/include/auth-server/dialogs.rb:32 -#: src/include/auth-server/wizards.rb:52 -#: src/include/auth-server/wizards.rb:122 -#: src/include/auth-server/wizards.rb:205 -#: src/include/auth-server/wizards.rb:298 +#. heading for all dialogs +#. FIXME: adapt to your needs +#. Initialization dialog caption +#. Initialization dialog caption +#. Initialization dialog caption +#: src/include/auth-server/dialogs.rb:32 src/include/auth-server/wizards.rb:52 +#: src/include/auth-server/wizards.rb:122 +#: src/include/auth-server/wizards.rb:205 +#: src/include/auth-server/wizards.rb:298 msgid "Authentication Server Configuration" msgstr "인증 서버 구성" -#. ********************* -#. * dialog functions ** -#. ******************** -#: src/include/auth-server/dialogs.rb:48 +#. ********************* +#. * dialog functions ** +#. ******************** +#: src/include/auth-server/dialogs.rb:48 msgid "General Settings" msgstr "일반 설정" -#. list of valid encoding methods for password inputs, used by add database and edit database -#. dialogs -#: src/include/auth-server/dialogs.rb:52 -#: src/include/auth-server/widgets.rb:40 +#. list of valid encoding methods for password inputs, used by add database and edit database +#. dialogs +#: src/include/auth-server/dialogs.rb:52 src/include/auth-server/widgets.rb:40 msgid "&Start LDAP Server" msgstr "LDAP 서버 시작(&S)" -#: src/include/auth-server/dialogs.rb:77 -#: src/include/auth-server/widgets.rb:59 +#: src/include/auth-server/dialogs.rb:77 src/include/auth-server/widgets.rb:59 msgid "Register at an &SLP Daemon" msgstr "SLP 데몬에서 등록(&S)" -#. `HWeight(1, `PushButton( `id( `pb_interface_ldaps), "Interfaces ...")), +#. `HWeight(1, `PushButton( `id( `pb_interface_ldaps), "Interfaces ...")), #: src/include/auth-server/dialogs.rb:88 -#: src/include/auth-server/widgets.rb:127 +#: src/include/auth-server/widgets.rb:127 msgid "Firewall Settings" msgstr "방화벽 설정" -#. create new item -#: src/include/auth-server/dialogs.rb:198 +#. create new item +#: src/include/auth-server/dialogs.rb:198 msgid "The LDAP Server is not running." msgstr "LDAP 서버가 실행 중이 아닙니다." -#: src/include/auth-server/dialogs.rb:199 -msgid "" -"Do you want to start it now to re-read its configuration data or do you want " -"to create a new configuration from scratch?" -msgstr "" -"지금 시작하여 구성 데이터를 다시 읽으시겠습니까, 아니면 처음부터 새 구성을 만" -"드시겠습니까?" +#: src/include/auth-server/dialogs.rb:199 +msgid "Do you want to start it now to re-read its configuration data or do you want to create a new configuration from scratch?" +msgstr "지금 시작하여 구성 데이터를 다시 읽으시겠습니까, 아니면 처음부터 새 구성을 만드시겠습니까?" -#. get helps page -#: src/include/auth-server/dialogs.rb:227 +#. get helps page +#: src/include/auth-server/dialogs.rb:227 msgid "help page for item <b>" msgstr "항목의 도움말 페이지 <b>" -#: src/include/auth-server/dialogs.rb:228 +#: src/include/auth-server/dialogs.rb:228 msgid "</b> not available" msgstr "</b> 사용 불가능" -#: src/include/auth-server/dialogs.rb:327 +#: src/include/auth-server/dialogs.rb:327 msgid "Server Type" msgstr "서버 유형" -#: src/include/auth-server/dialogs.rb:338 +#: src/include/auth-server/dialogs.rb:338 msgid "Stand-alone server" msgstr "독립형 서버" -#: src/include/auth-server/dialogs.rb:346 +#: src/include/auth-server/dialogs.rb:346 msgid "Master server in a replication setup" msgstr "복제 설정의 마스터 서버" -#: src/include/auth-server/dialogs.rb:354 +#: src/include/auth-server/dialogs.rb:354 msgid "Replica (slave) server.\n" msgstr "복제(종속) 서버.\n" -#: src/include/auth-server/dialogs.rb:355 +#: src/include/auth-server/dialogs.rb:355 msgid "All data, including configuration, is replicated from a remote server." msgstr "구성을 포함한 모든 데이터가 원격 서버에서 복제됩니다." -#: src/include/auth-server/dialogs.rb:386 +#: src/include/auth-server/dialogs.rb:386 msgid "" "YaST was not able to determine the fully qualified hostname of this\n" "computer. \n" @@ -374,36 +354,36 @@ "YaST에서 이 컴퓨터의 정규화된 호스트 이름을\n" "확인할 수 없습니다. \n" -#: src/include/auth-server/dialogs.rb:389 +#: src/include/auth-server/dialogs.rb:389 msgid "Setting up a replication master is currently not possible." msgstr "현재 복제 마스터를 설정할 수 없습니다." -#. Button text -#: src/include/auth-server/dialogs.rb:452 +#. Button text +#: src/include/auth-server/dialogs.rb:452 msgid "&Advanced Configuration" msgstr "고급 구성(&A)" -#: src/include/auth-server/dialogs.rb:464 +#: src/include/auth-server/dialogs.rb:464 msgid "Kerberos Authentication" msgstr "Kerberos 인증" -#: src/include/auth-server/dialogs.rb:467 +#: src/include/auth-server/dialogs.rb:467 msgid "&Enable Kerberos Authentication" msgstr "Kerberos 인증 활성화(&E)" -#: src/include/auth-server/dialogs.rb:494 +#: src/include/auth-server/dialogs.rb:494 msgid "Basic Kerberos Settings" msgstr "기본 Kerberos 설정" -#. TextEntry label: "Realm" is a typical kerberos phrase. -#. Please think twice please before you translate this, -#. and check with kerberos.pot how it is translated there. -#: src/include/auth-server/dialogs.rb:502 +#. TextEntry label: "Realm" is a typical kerberos phrase. +#. Please think twice please before you translate this, +#. and check with kerberos.pot how it is translated there. +#: src/include/auth-server/dialogs.rb:502 msgid "R&ealm" msgstr "영역(&E)" -#. abort? -#: src/include/auth-server/dialogs.rb:563 +#. abort? +#: src/include/auth-server/dialogs.rb:563 msgid "" "The package '%1' is not available.\n" "YaST2 cannot enable Kerberos\n" @@ -413,183 +393,179 @@ "패키지를 설치해야 YaST2에서 Kerberos를\n" "활성화할 수 있습니다." -#. caption -#: src/include/auth-server/dialogs.rb:595 +#. caption +#: src/include/auth-server/dialogs.rb:595 msgid "Advanced Kerberos Configuration" msgstr "고급 Kerberos 구성" -#. tree widget label -#: src/include/auth-server/dialogs.rb:623 +#. tree widget label +#: src/include/auth-server/dialogs.rb:623 msgid "Advanced &Options" msgstr "고급 옵션(&O)" -#. label widget -#. header label -#: src/include/auth-server/dialogs.rb:637 -#: src/include/auth-server/dialogs.rb:729 +#. label widget +#. header label +#: src/include/auth-server/dialogs.rb:637 +#: src/include/auth-server/dialogs.rb:729 msgid "Current Selection: " msgstr "현재의 선택: " -#. tree widget headline -#: src/include/auth-server/dialogs.rb:789 +#. tree widget headline +#: src/include/auth-server/dialogs.rb:789 msgid "Configuration:" msgstr "구성" -#. ############## input handler ################ -#: src/include/auth-server/dialogs.rb:913 +#. ############## input handler ################ +#: src/include/auth-server/dialogs.rb:913 msgid "LDAP Authentication failed. Try again?\n" msgstr "LDAP 인증에 실패했습니다. 다시 시도하시겠습니까?\n" -#: src/include/auth-server/dialogs.rb:914 +#: src/include/auth-server/dialogs.rb:914 msgid "Error message: " msgstr "오류 메시지:" -#: src/include/auth-server/dialogs.rb:946 +#: src/include/auth-server/dialogs.rb:946 msgid "Create new account in the first database" msgstr "첫 번째 데이터베이스에서 새 계정 생성" -#: src/include/auth-server/dialogs.rb:960 +#: src/include/auth-server/dialogs.rb:960 msgid "User Id" msgstr "사용자 ID" -#: src/include/auth-server/dialogs.rb:967 +#: src/include/auth-server/dialogs.rb:967 msgid "Container Object" msgstr "컨테이너 객체" -#: src/include/auth-server/dialogs.rb:973 +#: src/include/auth-server/dialogs.rb:973 msgid "Browse" msgstr "찾아보기" -#: src/include/auth-server/dialogs.rb:980 +#: src/include/auth-server/dialogs.rb:980 msgid "Generate a Random Password" msgstr "임의 비밀번호 생성" -#: src/include/auth-server/dialogs.rb:992 +#: src/include/auth-server/dialogs.rb:992 msgid "Use the \"cn=config\" Account for Replication" msgstr "복제에 \"cn=config\" 계정 사용" -#: src/include/auth-server/dialogs.rb:1007 +#: src/include/auth-server/dialogs.rb:1007 msgid "Configure Account for Replication" msgstr "복제할 계정 구성" -#: src/include/auth-server/dialogs.rb:1057 src/modules/LdapDatabase.rb:908 -#: src/modules/LdapDatabase.rb:1167 +#: src/include/auth-server/dialogs.rb:1057 src/modules/LdapDatabase.rb:908 +#: src/modules/LdapDatabase.rb:1167 msgid "is not a valid LDAP DN" msgstr "유효한 LDAP DN이 아닙니다." -#: src/include/auth-server/dialogs.rb:1068 src/modules/LdapDatabase.rb:1673 +#: src/include/auth-server/dialogs.rb:1068 src/modules/LdapDatabase.rb:1673 msgid "Password" msgstr "비밀번호" -#: src/include/auth-server/dialogs.rb:1073 +#: src/include/auth-server/dialogs.rb:1073 msgid "Validate Password" msgstr "비밀번호 확인" -#: src/include/auth-server/dialogs.rb:1093 -#: src/include/auth-server/dialogs.rb:1565 -#: src/include/auth-server/tree_structure.rb:910 -#: src/include/auth-server/widgets.rb:424 +#: src/include/auth-server/dialogs.rb:1093 +#: src/include/auth-server/dialogs.rb:1565 +#: src/include/auth-server/tree_structure.rb:910 +#: src/include/auth-server/widgets.rb:424 msgid "Enter a password" msgstr "비밀번호 입력" -#: src/include/auth-server/dialogs.rb:1101 -#: src/include/auth-server/dialogs.rb:1570 -#: src/include/auth-server/tree_structure.rb:916 -#: src/include/auth-server/widgets.rb:435 +#: src/include/auth-server/dialogs.rb:1101 +#: src/include/auth-server/dialogs.rb:1570 +#: src/include/auth-server/tree_structure.rb:916 +#: src/include/auth-server/widgets.rb:435 msgid "The passwords you have entered do not match. Try again." msgstr "입력한 비밀번호가 일치하지 않습니다. 다시 시도하십시오." -#: src/include/auth-server/dialogs.rb:1131 +#: src/include/auth-server/dialogs.rb:1131 msgid "Provider Details" msgstr "공급자 세부 사항" -#: src/include/auth-server/dialogs.rb:1139 src/modules/LdapDatabase.rb:1601 -#: src/modules/LdapDatabase.rb:1696 +#: src/include/auth-server/dialogs.rb:1139 src/modules/LdapDatabase.rb:1601 +#: src/modules/LdapDatabase.rb:1696 msgid "Protocol" msgstr "프로토콜" -#: src/include/auth-server/dialogs.rb:1146 +#: src/include/auth-server/dialogs.rb:1146 msgid "Provider Hostname" msgstr "공급자 호스트 이름" -#: src/include/auth-server/dialogs.rb:1150 src/modules/LdapDatabase.rb:1613 -#: src/modules/LdapDatabase.rb:1710 +#: src/include/auth-server/dialogs.rb:1150 src/modules/LdapDatabase.rb:1613 +#: src/modules/LdapDatabase.rb:1710 msgid "Port" msgstr "포트" -#: src/include/auth-server/dialogs.rb:1153 src/modules/LdapDatabase.rb:1618 +#: src/include/auth-server/dialogs.rb:1153 src/modules/LdapDatabase.rb:1618 msgid "Use StartTLS" msgstr "StartTLS 사용" -#: src/include/auth-server/dialogs.rb:1162 +#: src/include/auth-server/dialogs.rb:1162 msgid "Administration Password for the \"cn=config\" Database" msgstr "\"cn=config\" 데이터베이스의 관리 비밀번호" -#: src/include/auth-server/dialogs.rb:1171 -#: src/include/auth-server/widgets.rb:261 +#: src/include/auth-server/dialogs.rb:1171 +#: src/include/auth-server/widgets.rb:261 msgid "C&A Certificate File (PEM Format)" msgstr "CA 인증서 파일(PEM 형식)(&A)" -#: src/include/auth-server/dialogs.rb:1174 -#: src/include/auth-server/widgets.rb:264 +#: src/include/auth-server/dialogs.rb:1174 +#: src/include/auth-server/widgets.rb:264 msgid "Bro&wse..." msgstr "찾아보기(&W)..." -#. file selection headline -#: src/include/auth-server/dialogs.rb:1231 -#: src/include/auth-server/tree_structure.rb:567 +#. file selection headline +#: src/include/auth-server/dialogs.rb:1231 +#: src/include/auth-server/tree_structure.rb:567 msgid "Select CA Certificate File" msgstr "CA 인증서 파일 선택" -#. **************************** -#. * tls handlers -#. *************************** -#: src/include/auth-server/dialogs.rb:1237 -#: src/include/auth-server/tree_structure.rb:458 +#. **************************** +#. * tls handlers +#. *************************** +#: src/include/auth-server/dialogs.rb:1237 +#: src/include/auth-server/tree_structure.rb:458 msgid "Select a Valid CA Certificate File" msgstr "유효한 CA 인증서 파일 선택" -#. Doing these checks during installation will -#. most probably fail -#: src/include/auth-server/dialogs.rb:1277 -msgid "" -"Failed to open connection to the \"cn=config\" database on the provider " -"server.\n" -msgstr "" -"공급자 서버의 \"cn=config\" 데이터베이스에 대한 연결을 열지 못했습니다.\n" +#. Doing these checks during installation will +#. most probably fail +#: src/include/auth-server/dialogs.rb:1277 +msgid "Failed to open connection to the \"cn=config\" database on the provider server.\n" +msgstr "공급자 서버의 \"cn=config\" 데이터베이스에 대한 연결을 열지 못했습니다.\n" -#: src/include/auth-server/dialogs.rb:1280 +#: src/include/auth-server/dialogs.rb:1280 msgid "" "Verify that the provider server allows remote connections to the \n" "\"cn=config\" database and that you entered the correct password.\n" msgstr "" "공급자 서버에서 \n" -"\"cn=config\" 데이터베이스에 대한 원격 연결을 허용하는지, 올바른 비밀번호를 " -"입력했는지 확인하십시오.\n" +"\"cn=config\" 데이터베이스에 대한 원격 연결을 허용하는지, 올바른 비밀번호를 입력했는지 확인하십시오.\n" -#: src/include/auth-server/dialogs.rb:1287 +#: src/include/auth-server/dialogs.rb:1287 msgid "The following error messages were returned:" msgstr "다음 오류 메시지가 반환되었습니다." -#: src/include/auth-server/dialogs.rb:1302 +#: src/include/auth-server/dialogs.rb:1302 msgid "An error occurred while verifying the TLS/SSL configuration." msgstr "TLS/SSL 구성을 확인하는 중 오류가 발생했습니다." -#: src/include/auth-server/dialogs.rb:1314 +#: src/include/auth-server/dialogs.rb:1314 msgid "Do you want to import a different CA/Server Certificate?" msgstr "다른 CA/서버 인증서를 임포트하시겠습니까?" -#. Check if the syncrepl config of cn=config makes sense -#: src/include/auth-server/dialogs.rb:1325 +#. Check if the syncrepl config of cn=config makes sense +#: src/include/auth-server/dialogs.rb:1325 msgid "The replication configuration on the provider server is missing.\n" msgstr "공급자 서버의 복제 구성이 누락되었습니다.\n" -#: src/include/auth-server/dialogs.rb:1328 +#: src/include/auth-server/dialogs.rb:1328 msgid "Click Continue to create it now." msgstr "지금 생성하려면 [계속]을 클릭하십시오." -#. this test needs only be done in a non-MirrorMode setup -#: src/include/auth-server/dialogs.rb:1380 +#. this test needs only be done in a non-MirrorMode setup +#: src/include/auth-server/dialogs.rb:1380 msgid "" "The replication configuration on the master server indicates that\n" "it is already acting as a replication consumer.\n" @@ -597,139 +573,121 @@ "마스터 서버의 복제 구성에서\n" "복제 소비자로 이미 작동 중임을 나타냅니다.\n" -#: src/include/auth-server/dialogs.rb:1383 -msgid "" -"Setting up cascaded replication of the cn=config is currently not supported." +#: src/include/auth-server/dialogs.rb:1383 +msgid "Setting up cascaded replication of the cn=config is currently not supported." msgstr "현재 cn=config의 계단식 복제 설정은 지원되지 않습니다." -#. 2. Verify that the binddn/credential combination acutally works -#: src/include/auth-server/dialogs.rb:1410 -msgid "" -"Checking the authentication credentials defined in the replication " -"configuration on the provider server failed.\n" +#. 2. Verify that the binddn/credential combination acutally works +#: src/include/auth-server/dialogs.rb:1410 +msgid "Checking the authentication credentials defined in the replication configuration on the provider server failed.\n" msgstr "공급자 서버의 복제 구성에 정의된 인증 자격 증명 확인에 실패했습니다.\n" -#: src/include/auth-server/dialogs.rb:1413 src/modules/LdapDatabase.rb:1965 -#: src/modules/LdapDatabase.rb:1992 +#: src/include/auth-server/dialogs.rb:1413 src/modules/LdapDatabase.rb:1965 +#: src/modules/LdapDatabase.rb:1992 msgid "The test returned the following error messages:" msgstr "테스트 결과 다음 오류 메시지가 반환되었습니다." -#: src/include/auth-server/dialogs.rb:1424 +#: src/include/auth-server/dialogs.rb:1424 msgid "Click \"Continue\" to correct this now." msgstr "지금 수정하려면 \"계속\"을 클릭하십시오." -#. ReplicatonSummary dialog -#. @return dialog result -#: src/include/auth-server/dialogs.rb:1519 +#. ReplicatonSummary dialog +#. @return dialog result +#: src/include/auth-server/dialogs.rb:1519 msgid "Replication Master setup" msgstr "복제 마스터 설정" -#: src/include/auth-server/dialogs.rb:1522 +#: src/include/auth-server/dialogs.rb:1522 msgid "" "To act as a master server for replication, the configuration database needs\n" "to be remotely accessible. Set a password for the configuration database.\n" msgstr "" "복제 마스터 서버로 작동하려면 구성 데이터베이스에 원격으로\n" -"액세스할 수 있어야 합니다. 구성 데이터베이스에 대한 비밀번호를 설정하십시" -"오.\n" +"액세스할 수 있어야 합니다. 구성 데이터베이스에 대한 비밀번호를 설정하십시오.\n" -#: src/include/auth-server/dialogs.rb:1525 +#: src/include/auth-server/dialogs.rb:1525 msgid "" "\n" -"(Remote access to the Configuration database will be restricted to " -"encrypted\n" +"(Remote access to the Configuration database will be restricted to encrypted\n" "LDAP Connections.)\n" msgstr "" "\n" "(구성 데이터베이스에 대한 원격 액세스는 암호화된\n" "LDAP 연결로 제한됩니다.)\n" -#: src/include/auth-server/dialogs.rb:1532 +#: src/include/auth-server/dialogs.rb:1532 msgid "Enter new &Password" msgstr "새 비밀번호 입력(&P)" -#: src/include/auth-server/dialogs.rb:1537 -#: src/include/auth-server/tree_structure.rb:964 -#: src/include/auth-server/tree_structure.rb:1006 -#: src/include/auth-server/widgets.rb:406 src/modules/LdapDatabase.rb:219 +#: src/include/auth-server/dialogs.rb:1537 +#: src/include/auth-server/tree_structure.rb:964 +#: src/include/auth-server/tree_structure.rb:1006 +#: src/include/auth-server/widgets.rb:406 src/modules/LdapDatabase.rb:219 msgid "&Validate Password" msgstr "비밀번호 확인(&V)" -#: src/include/auth-server/dialogs.rb:1543 +#: src/include/auth-server/dialogs.rb:1543 msgid "Prepare for MirrorMode replication (generates the serverId attribute)" msgstr "MirrorMode 복제 준비(serverId 특성을 생성함)" -#. The "Startup Configuration node for the main tree widget -#: src/include/auth-server/helps.rb:17 +#. The "Startup Configuration node for the main tree widget +#: src/include/auth-server/helps.rb:17 msgid "<h3>Startup Configuration</h3>" msgstr "<h3>시작 구성</h3>" -#: src/include/auth-server/helps.rb:20 +#: src/include/auth-server/helps.rb:20 msgid "<h4>Start LDAP Server</h4>" msgstr "<h4>LDAP 서버 시작</h4>" -#: src/include/auth-server/helps.rb:21 +#: src/include/auth-server/helps.rb:21 msgid "" "<p>Select <b>Yes</b> if the LDAP server should be started automatically as \n" -"part of the boot process. Select <b>No</b> if the LDAP server should not be " -"started. Note:\n" -"After selecting <b>No</b>, you cannot change the OpenLDAP configuration.\n" +"part of the boot process. Select <b>No</b> if the LDAP server should not be started. Note:\n" +"After selecting <b>No</b>, you cannot change the OpenLDAP configuration.</p>\n" msgstr "" -"<p>부팅 프로세스의 일부로 LDAP 서버가 자동으로 시작되어야 하는 경우 <b>예</b>" -"를\n" -"선택하십시오. LDAP 서버가 시작되지 않아야 하는 경우 <b>아니요</b>를 선택하십" -"시오. 참고:\n" +"<p>부팅 프로세스의 일부로 LDAP 서버가 자동으로 시작되어야 하는 경우 <b>예</b>를\n" +"선택하십시오. LDAP 서버가 시작되지 않아야 하는 경우 <b>아니요</b>를 선택하십시오. 참고:\n" "<b>아니요</b>를 선택한 후에는 OpenLDAP 구성을 변경할 수 없습니다.</p>\n" -#: src/include/auth-server/helps.rb:26 +#: src/include/auth-server/helps.rb:26 msgid "<h4>Protocol Listeners</h4>" msgstr "<h4>프로토콜 리스너</h4>" -#: src/include/auth-server/helps.rb:27 +#: src/include/auth-server/helps.rb:27 msgid "<p>Enable and disable the various protocol listeners of OpenLDAP.</p>" msgstr "<p>OpenLDAP의 다양한 프로토콜 리스너를 활성화 및 비활성화하십시오.</p>" -#: src/include/auth-server/helps.rb:30 +#: src/include/auth-server/helps.rb:30 msgid "" -"<p><b>LDAP</b> is the standard LDAP interface on Port 389. TLS/SSL secured " -"communication\n" -"is possible with the StartTLS operation when you have a server certificate " -"configured.</p>" +"<p><b>LDAP</b> is the standard LDAP interface on Port 389. TLS/SSL secured communication\n" +"is possible with the StartTLS operation when you have a server certificate configured.</p>" msgstr "" "<p><b>LDAP</b>은 포트 389에서 표준 LDAP 인터페이스입니다. \n" -"서버 인증서가 구성된 경우 StartTLS 작업과 함께 TLS/SSL 보안 통신이 가능합니" -"다.</p>" +"서버 인증서가 구성된 경우 StartTLS 작업과 함께 TLS/SSL 보안 통신이 가능합니다.</p>" -#: src/include/auth-server/helps.rb:33 +#: src/include/auth-server/helps.rb:33 msgid "" -"<p><b>LDAPS</b> enables the \"LDAP over SSL (ldaps)\" interface for SSL " -"protected\n" -"connections on port 636. This only works if you have a server certificate " -"configured (see \"Global Settings\"/\"TLS Settings\").\n" +"<p><b>LDAPS</b> enables the \"LDAP over SSL (ldaps)\" interface for SSL protected\n" +"connections on port 636. This only works if you have a server certificate configured (see \"Global Settings\"/\"TLS Settings\").\n" msgstr "" -"<p><b>LDAPS</b>는 포트 636에서 SSL로 보호된 연결에 대해 \"SSL 상의 LDAP" -"(ldaps)\"\n" -"인터페이스를 활성화합니다. 이 옵션은 서버 인증서가 구성되어 있는 경우에만 작" -"동합니다(\"전역 설정\"/\"TLS 설정\" 참조).\n" +"<p><b>LDAPS</b>는 포트 636에서 SSL로 보호된 연결에 대해 \"SSL 상의 LDAP(ldaps)\"\n" +"인터페이스를 활성화합니다. 이 옵션은 서버 인증서가 구성되어 있는 경우에만 작동합니다(\"전역 설정\"/\"TLS 설정\" 참조).\n" -#: src/include/auth-server/helps.rb:36 +#: src/include/auth-server/helps.rb:36 msgid "" "<p><b>LDAPI</b> enables the \"LDAP over IPC\" interface for accessing the\n" "LDAP server via a Unix Domain Socket. Do not disable the LDAPI interface \n" "as YaST uses it to communicate with the server.</p>\n" msgstr "" -"<p><b>LDAPI</b>는 Unix 도메인 소켓을 통해 LDAP 서버에 액세스하기 위한 \"IPC상" -"의 LDAP\"\n" -"인터페이스를 활성화합니다. YaST에서 서버와 통신하는 데 사용하므로 LDAPI 인터" -"페이스를 \n" +"<p><b>LDAPI</b>는 Unix 도메인 소켓을 통해 LDAP 서버에 액세스하기 위한 \"IPC상의 LDAP\"\n" +"인터페이스를 활성화합니다. YaST에서 서버와 통신하는 데 사용하므로 LDAPI 인터페이스를 \n" "비활성화하지 마십시오.</p>\n" -#: src/include/auth-server/helps.rb:41 +#: src/include/auth-server/helps.rb:41 msgid "<h4>Firewall Settings</h4>" msgstr "<h4>방화벽 설정</h4>" -#: src/include/auth-server/helps.rb:42 +#: src/include/auth-server/helps.rb:42 msgid "" "<p>Select whether SuSEFirewall should allow access on the LDAP-related\n" "network ports or not.</p>\n" @@ -737,38 +695,30 @@ "<p>SuSEFirewall에서 LDAP 관련 네트워크 포트의 액세스를\n" "허용할지 여부를 선택하십시오.</p>\n" -#. First part of the Add Database Widget -#: src/include/auth-server/helps.rb:46 +#. First part of the Add Database Widget +#: src/include/auth-server/helps.rb:46 msgid "<h3>Basic Database Settings</h3>" msgstr "<h3>기본 데이터베이스 설정</h3>" -#: src/include/auth-server/helps.rb:49 +#: src/include/auth-server/helps.rb:49 msgid "" -"<p>Choose the <b>Database</b> from <b>hdb</b> <b>bdb</b> and <b>mdb</b>. " -"<b>Hdb</b> is a\n" -"variant of the <b>bdb</b> backend that uses a hierarchical database layout " -"and\n" +"<p>Choose the <b>Database</b> from <b>hdb</b> <b>bdb</b> and <b>mdb</b>. <b>Hdb</b> is a\n" +"variant of the <b>bdb</b> backend that uses a hierarchical database layout and\n" "supports subtree renames. Otherwise it is identical to <b>bdb</b>. A\n" "<b>hdb</b>-Database needs a larger <b>idlcachesize</b> than a\n" "<b>bdb</b>-Database for a good search performance.\n" -"<b>mdb</b>-Database uses OpenLDAP's Lightning Memory-Mapped DB (LMDB) " -"library to store data.\n" -"It similar to the <b>hdb</b> backend but it is both more space-efficient and " -"more execution-efficient.</p>\n" +"<b>mdb</b>-Database uses OpenLDAP's Lightning Memory-Mapped DB (LMDB) library to store data.\n" +"It similar to the <b>hdb</b> backend but it is both more space-efficient and more execution-efficient.</p>\n" msgstr "" -"<p><b>hdb</b> <b>bdb</b> 및 <b>mdb</b>에서 <b>데이터베이스</b>를 선택하십시" -"오. <b>Hdb</b>는\n" -"계층적 데이터베이스 레이아웃을 사용하고 하위 트리 이름 변경을 지원하는 " -"<b>bdb</b> 벡엔드의\n" +"<p><b>hdb</b> <b>bdb</b> 및 <b>mdb</b>에서 <b>데이터베이스</b>를 선택하십시오. <b>Hdb</b>는\n" +"계층적 데이터베이스 레이아웃을 사용하고 하위 트리 이름 변경을 지원하는 <b>bdb</b> 벡엔드의\n" "변형입니다. 그렇지 않으면 <b>bdb</b>와 같습니다.\n" "검색 성능을 향상하려면 <b>hdb</b> 데이터베이스의 <b>idlcachesize</b>가\n" "<b>bdb</b> 데이터베이스보다 커야 합니다.\n" -"<b>mdb</b> 데이터베이스는 OpenLDAP의 LMDB(Lightning Memory-Mapped DB) 라이브" -"러리를 사용하여 데이터를 저장합니다.\n" -"<b>hdb</b> 백엔드와 유사하지만 더 효율적으로 실행되고 더 공간 효율적입니다.\n" +"<b>mdb</b> 데이터베이스는 OpenLDAP의 LMDB(Lightning Memory-Mapped DB) 라이브러리를 사용하여 데이터를 저장합니다.\n" +"<b>hdb</b> 백엔드와 유사하지만 더 효율적으로 실행되고 더 공간 효율적입니다.</p>\n" -#: src/include/auth-server/helps.rb:58 +#: src/include/auth-server/helps.rb:58 msgid "" "<p>The <b>Base DN</b> option specifies the name of the root entry \n" "of the database being created.</p>" @@ -776,18 +726,13 @@ "<p><b>베이스 DN</b> 옵션은 생성 중인 데이터베이스의\n" "루트 항목 이름을 지정합니다.</p>" -#: src/include/auth-server/helps.rb:61 +#: src/include/auth-server/helps.rb:61 msgid "" -"<p>The <b>Administrator DN</b> along with a <b>LDAP Administrator Password \n" -"specifies a superuser identity for the database, surpassing all ACLs and " -"other \n" -"administrative limit restrictions. Checking <b>Append Base DN</b> appends " -"the \n" -"<b>Base DN</b> entered above, for example, a base DN of <tt>dc=example," -"dc=com</tt>\n" -"and Administrator DN of <tt>c=Admin</tt> would combine to an effective " -"Administrator DN\n" +"<p>The <b>Administrator DN</b> along with a <b>LDAP Administrator Password</b> \n" +"specifies a superuser identity for the database, surpassing all ACLs and other \n" +"administrative limit restrictions. Checking <b>Append Base DN</b> appends the \n" +"<b>Base DN</b> entered above, for example, a base DN of <tt>dc=example,dc=com</tt>\n" +"and Administrator DN of <tt>c=Admin</tt> would combine to an effective Administrator DN\n" "of <tt>c=Admin,dc=example,dc=com</tt>.</p> " msgstr "" "<p><b>관리자 DN</b>은 <b>LDAP 관리자 비밀번호</b>와 함께 모든 ACL 및\n" @@ -797,18 +742,17 @@ "<tt>c=Admin</tt>의 관리자 DN이 <tt>c=Admin,dc=example,dc=com</tt>의\n" "유효한 관리자 DN에 결합됩니다.</p> " -#: src/include/auth-server/helps.rb:69 +#: src/include/auth-server/helps.rb:69 msgid "" "<p>If this wizard was started during installation, the \n" -"<b>LDAP Administrator Password</b> is initially set to the system's root " -"password\n" +"<b>LDAP Administrator Password</b> is initially set to the system's root password\n" "entered earlier in the installation process.</p> " msgstr "" "<p>이 마법사가 설치 중에 시작된 경우 \n" "<b>LDAP 관리자 비밀번호</b>는 설치 프로세스의 이전 단계에 입력한\n" "시스템의 루트 비밀번호로 초기에 설정됩니다.</p> " -#: src/include/auth-server/helps.rb:74 +#: src/include/auth-server/helps.rb:74 msgid "" "<p>To use this database as default for the OpenLDAP client tools \n" "(e.g. ldapsearch), check <b>Use this database as the default for OpenLDAP\n" @@ -818,15 +762,13 @@ "when creating the first database on a server.</p>\n" msgstr "" "<p>이 데이터베이스를 OpenLDAP 클라이언트 도구\n" -"(예: ldapsearch)의 기본값으로 사용하려면 <b>이 데이터베이스를 OpenLDAP 클라이" -"언트의 기본값으로 사용</b>을\n" +"(예: ldapsearch)의 기본값으로 사용하려면 <b>이 데이터베이스를 OpenLDAP 클라이언트의 기본값으로 사용</b>을\n" "선택하십시오. 그러면 호스트 이름 \"localhost\" 및 위에서 입력한 \n" "<b>기본 DN</b>이 OpenLDAP 클라이언트 구성 파일 \n" -"<tt>/etc/openldap/ldap.conf</tt>에 기록됩니다. 서버에 첫 번째 데이터베이스를 " -"생성할 때 이 확인란은\n" +"<tt>/etc/openldap/ldap.conf</tt>에 기록됩니다. 서버에 첫 번째 데이터베이스를 생성할 때 이 확인란은\n" "기본적으로 선택되어 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:82 +#: src/include/auth-server/helps.rb:82 msgid "" "YaST currently does not support this database. You can not \n" "change any configuration settings here.\n" @@ -834,7 +776,7 @@ "YaST는 현재 이 데이터베이스를 지원하지 않습니다. 여기서 구성 설정을 \n" "변경할 수 없습니다.\n" -#: src/include/auth-server/helps.rb:85 +#: src/include/auth-server/helps.rb:85 msgid "" "<p>To enable or disable plaintext authentication (LDAP Simple Bind)\n" "for the configuration database, click the associated checkbox. Plaintext \n" @@ -844,17 +786,15 @@ "<p>구성 데이터베이스에 대해 일반 텍스트 인증(LDAP 단순 바인드)을\n" "활성화하거나 비활성화하려면 관련 확인란을 클릭하십시오. \n" "구성 데이터베이스에 대한 일반 텍스트 인증은 \n" -"충분히 보호된(예: SSL/TLS 암호화된) 연결을 사용하는 경우에만 허용됩니다.\n" +"충분히 보호된(예: SSL/TLS 암호화된) 연결을 사용하는 경우에만 허용됩니다.</p>\n" -#: src/include/auth-server/helps.rb:91 +#: src/include/auth-server/helps.rb:91 msgid "" "<p>To change the administration password for the configuration database, \n" "click <b>Change Password</b>. \n" "A Popup will prompt you to enter the new password and select the \n" "<b>Password Encryption</b>. \n" -"The password fields are initially empty even if a password has already " -"been \n" +"The password fields are initially empty even if a password has already been \n" "set in the configuration.</p>\n" msgstr "" "<p>구성 데이터베이스에 대한 관리 비밀번호를 변경하려면 \n" @@ -864,69 +804,55 @@ "구성에서 비밀번호가 이미 설정된 경우에도 비밀번호 필드는 처음에 \n" "비어 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:99 +#: src/include/auth-server/helps.rb:99 msgid "<h3>Edit BDB Database</h3>" msgstr "<h3>BDB 데이터베이스 편집</h3>" -#: src/include/auth-server/helps.rb:100 +#: src/include/auth-server/helps.rb:100 msgid "<p>Change basic settings of BDB and HDB Databases.</p>" msgstr "<p>BDB 및 HDB 데이터베이스의 기본 설정을 변경하십시오.</p>" -#: src/include/auth-server/helps.rb:101 +#: src/include/auth-server/helps.rb:101 msgid "" -"<p>Enter the complete DN or only the first part and append the base DN " -"automatically\n" +"<p>Enter the complete DN or only the first part and append the base DN automatically\n" "with <b>Append Base DN</b>.</p>" msgstr "" "<p><b>베이스 DN 추가</b>를 사용하여 전체 DN 또는 앞 부분만 입력하고 \n" "베이스 DN을 자동으로 추가합니다.</p>" -#: src/include/auth-server/helps.rb:104 +#: src/include/auth-server/helps.rb:104 msgid "" -"<p>To change the password for the administrator account, click <b>Change " -"Password</b>.\n" -"A Popup will prompt you to enter the new password and select the <b>Password " -"Encryption</b>.\n" -"The password fields are initially empty even if a password has already been " -"set in the configuration.</p>\n" +"<p>To change the password for the administrator account, click <b>Change Password</b>.\n" +"A Popup will prompt you to enter the new password and select the <b>Password Encryption</b>.\n" +"The password fields are initially empty even if a password has already been set in the configuration.</p>\n" msgstr "" "<p>관리자 계정의 비밀번호를 변경하려면 <b>비밀번호 변경</b>을 클릭하십시오.\n" "새 비밀번호를 입력하고 <b>비밀번호 암호화</b>를 \n" "선택하라는 팝업이 표시됩니다.\n" -"구성에서 비밀번호가 이미 설정된 경우에도 비밀번호 필드는 처음에 비어 있습니" -"다.</p>\n" +"구성에서 비밀번호가 이미 설정된 경우에도 비밀번호 필드는 처음에 비어 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:109 +#: src/include/auth-server/helps.rb:109 msgid "" -"<p>With the <b>Entry Cache</b> and <b>Index Cache (IDL cache)</b> you can " -"adjust\n" -"the sizes of OpenLDAP's internal caches. The <b>Entry Cache</b> defines the " -"number of entries\n" -"that are kept in OpenLDAP's in-memory entry cache. If it is possible (enough " -"RAM) this number\n" -"should be large enough to keep the whole database in memory. The <b>Index " -"Cache (IDL cache)</b> \n" -"is used to speed up searches on indexed attributes. In general especially " -"HDB-Databases require a\n" -"large IDL cache for good search performance (three times the size of the " -"entry cache as a rule of\n" +"<p>With the <b>Entry Cache</b> and <b>Index Cache (IDL cache)</b> you can adjust\n" +"the sizes of OpenLDAP's internal caches. The <b>Entry Cache</b> defines the number of entries\n" +"that are kept in OpenLDAP's in-memory entry cache. If it is possible (enough RAM) this number\n" +"should be large enough to keep the whole database in memory. The <b>Index Cache (IDL cache)</b> \n" +"is used to speed up searches on indexed attributes. In general especially HDB-Databases require a\n" +"large IDL cache for good search performance (three times the size of the entry cache as a rule of\n" "thumbs).</p>" msgstr "" "<p><b>항목 캐시</b>와 <b>인덱스 캐시(IDL 캐시)</b>를 사용하여\n" -"OpenLDAP의 내부 캐시 크기를 조정할 수 있습니다. <b>항목 캐시</b>는 OpenLDAP" -"의 메모리 내 항목 캐시에 보관된\n" +"OpenLDAP의 내부 캐시 크기를 조정할 수 있습니다. <b>항목 캐시</b>는 OpenLDAP의 메모리 내 항목 캐시에 보관된\n" "항목 수를 정의합니다. 이 항목 수를 정의할 수 있으려면(RAM이 충분함)\n" -"이 숫자는 메모리에 전체 데이터베이스를 보관할 수 있을 만큼 커야 합니다. <b>인" -"덱스 캐시(IDL 캐시)</b>는 인덱스된 특성에서 \n" -"검색 속도를 높이는 데 사용됩니다. 특히, HDB 데이터베이스에는 일반적으로 우수" -"한 검색 성능을 위해\n" +"이 숫자는 메모리에 전체 데이터베이스를 보관할 수 있을 만큼 커야 합니다. <b>인덱스 캐시(IDL 캐시)</b>는 인덱스된 특성에서 \n" +"검색 속도를 높이는 데 사용됩니다. 특히, HDB 데이터베이스에는 일반적으로 우수한 검색 성능을 위해\n" "대용량 IDL 캐시가 필요합니다(항목 캐시 크기의 3배).</p>" -#: src/include/auth-server/helps.rb:118 +#: src/include/auth-server/helps.rb:118 msgid "<h3>Password Policy Settings</h3>" msgstr "<h3>비밀번호 정책 설정</h3>" -#: src/include/auth-server/helps.rb:119 +#: src/include/auth-server/helps.rb:119 msgid "" "<p>To make use of password policies for this database, enable \n" "<b>Enable Password Policies</b>.</p>" @@ -934,28 +860,21 @@ "<p>이 데이터베이스에 비밀번호 정책을 사용하려면\n" "<b>비밀번호 정책 활성화</b>를 활성화합니다.</p>" -#: src/include/auth-server/helps.rb:122 +#: src/include/auth-server/helps.rb:122 msgid "" -"<p>Check <b>Hash Clear Text Passwords</b> to specify that the OpenLDAP " -"server\n" -"should encrypt clear text passwords present in add and modify requests " -"before storing them\n" -"in the database. Note that this violates the X.500/LDAP information model, " -"but may be\n" -"needed to compensate for LDAP clients that do not use the password modify " -"extended operation \n" +"<p>Check <b>Hash Clear Text Passwords</b> to specify that the OpenLDAP server\n" +"should encrypt clear text passwords present in add and modify requests before storing them\n" +"in the database. Note that this violates the X.500/LDAP information model, but may be\n" +"needed to compensate for LDAP clients that do not use the password modify extended operation \n" "to manage passwords.</p> " msgstr "" -"<p>데이터베이스에 저장하기 전에 추가 및 수정 요청에 존재하는 일반 텍스트 비밀" -"번호를\n" -"OpenLDAP 서버가 암호화하도록 지정하려면 <b>일반 텍스트 비밀번호 해싱</b>을 선" -"택합니다.\n" +"<p>데이터베이스에 저장하기 전에 추가 및 수정 요청에 존재하는 일반 텍스트 비밀번호를\n" +"OpenLDAP 서버가 암호화하도록 지정하려면 <b>일반 텍스트 비밀번호 해싱</b>을 선택합니다.\n" "이는 X.500/LDAP 정보 모델을 위반하는 것이지만\n" -" 비밀번호 수정 확장 작업을 사용하여 비밀번호를 관리하지 않는 LDAP 클라이언트" -"에는 \n" +" 비밀번호 수정 확장 작업을 사용하여 비밀번호를 관리하지 않는 LDAP 클라이언트에는 \n" "보완이 필요할 수 있습니다.</p>" -#: src/include/auth-server/helps.rb:129 +#: src/include/auth-server/helps.rb:129 msgid "" "<p>If <b>Disclose \"Account Locked\" Status</b> is enabled, users trying to\n" "authenticate to a locked account are notified that their account is\n" @@ -969,45 +888,37 @@ "제공할 수도 있습니다. 보안 문제가 중요한 사이트에서는 이 옵션을\n" "활성화하면 안 됩니다.</p> \n" -#: src/include/auth-server/helps.rb:136 -msgid "" -"<p>Enter the name of the default policy object in <b>Default Policy Object " -"DN</b>.</p>" -msgstr "" -"<p><b>기본 정책 개체 DN</b>에 기본 정책 개체의 이름을 입력하십시오.</p>" +#: src/include/auth-server/helps.rb:136 +msgid "<p>Enter the name of the default policy object in <b>Default Policy Object DN</b>.</p>" +msgstr "<p><b>기본 정책 개체 DN</b>에 기본 정책 개체의 이름을 입력하십시오.</p>" -#: src/include/auth-server/helps.rb:139 +#: src/include/auth-server/helps.rb:139 msgid "" -"<p>Create or change the default policy by clicking <b>Edit Policy</b>. You " -"may\n" +"<p>Create or change the default policy by clicking <b>Edit Policy</b>. You may\n" "be asked to enter the LDAP administrator password afterwards to allow the\n" "Policy Object being read from the server.</p>\n" msgstr "" "<p><b>정책 편집</b>을 클릭하여 기본 정책을 생성하거나 변경하십시오.\n" -"서버에서 정책 객체를 읽을 수 있도록 그 후에 LDAP 관리자 비밀번호를 입력하라" -"는\n" +"서버에서 정책 객체를 읽을 수 있도록 그 후에 LDAP 관리자 비밀번호를 입력하라는\n" "메시지가 표시될 수도 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:144 +#: src/include/auth-server/helps.rb:144 msgid "<h3>Index Configuration</h3>" msgstr "<h3>색인 구성</h3>" -#: src/include/auth-server/helps.rb:145 +#: src/include/auth-server/helps.rb:145 msgid "<p>Change the indexing options of a hdb of bdb-Database.</p>" msgstr "<p>bdb 데이터베이스의 hdb 인덱싱 옵션을 변경하십시오.</p>" -#: src/include/auth-server/helps.rb:146 -msgid "" -"<p>The table displays a list of attributes which currently have an index " -"defined.</p>" +#: src/include/auth-server/helps.rb:146 +msgid "<p>The table displays a list of attributes which currently have an index defined.</p>" msgstr "<p>테이블에는 현재 인덱스가 정의되어 있는 특성 목록이 표시됩니다.</p>" -#: src/include/auth-server/helps.rb:149 +#: src/include/auth-server/helps.rb:149 msgid "" "<p>Indexes are used by OpenLDAP to improve search performance on specific\n" "types of searches. Indexes should be configured corresponding to the most\n" -"common searches on a database. YaST allows you to setup three different " -"types\n" +"common searches on a database. YaST allows you to setup three different types\n" "of indexes.</p>\n" msgstr "" "<p>인덱스는 OpenLDAP에서 특정 유형의 검색 성능을 향상하기 위해\n" @@ -1015,40 +926,35 @@ "인덱스를 구성해야 합니다. YaST에서는 세 가지 인덱스를\n" "설정할 수 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:155 +#: src/include/auth-server/helps.rb:155 msgid "" "<p><b>Presence</b>: This index is used for searches with presence filters\n" -"(i.e. <tt>(attributeType=*)</tt>). Presence indexes should only be " -"configured\n" +"(i.e. <tt>(attributeType=*)</tt>). Presence indexes should only be configured\n" "for attributes that occur rarely in the database.</p>\n" msgstr "" -"<p><b>상태</b>: 이 인덱스는 상태 필터(즉, <tt>(attributeType=*)</tt>)를 사용" -"한 검색에\n" +"<p><b>상태</b>: 이 인덱스는 상태 필터(즉, <tt>(attributeType=*)</tt>)를 사용한 검색에\n" "사용됩니다. 상태 인덱스는 데이터베이스에서 드물게 발생하는\n" "특성에 대해서만 구성해야 합니다.</p>\n" -#: src/include/auth-server/helps.rb:160 +#: src/include/auth-server/helps.rb:160 msgid "" "<p><b>Equality</b>: This index is used for searches with equality filters \n" -"(i.e.(<tt>(attributeType=<exact values>)</tt>). An <b>Equality</b> " -"index\n" +"(i.e.(<tt>(attributeType=<exact values>)</tt>). An <b>Equality</b> index\n" "should always be configured with the <tt>objectclass</tt> attribute.</p>\n" msgstr "" -"<p><b>동등</b>: 이 인덱스는 동등 필터(즉, (<tt>(attributeType=<exact " -"values>)</tt>)를 \n" +"<p><b>동등</b>: 이 인덱스는 동등 필터(즉, (<tt>(attributeType=<exact values>)</tt>)를 \n" "사용한 검색에 사용됩니다. <b>동등</b> 인덱스는 항상\n" "<tt>objectclass</tt> 특성으로 구성해야 합니다.</p>\n" -#: src/include/auth-server/helps.rb:165 +#: src/include/auth-server/helps.rb:165 msgid "" "<p><b>Substring</b>: This index is used for searches with substring filters\n" "(i.e. <tt>(attributeType=<substring>*)</tt>)</p>\n" msgstr "" -"<p><b>하위 문자열</b>: 이 인덱스는 하위 문자열 필터(즉, <tt>" -"(attributeType=<substring>*)</tt>)를\n" +"<p><b>하위 문자열</b>: 이 인덱스는 하위 문자열 필터(즉, <tt>(attributeType=<substring>*)</tt>)를\n" "사용한 검색에 사용됩니다.</p>\n" -#: src/include/auth-server/helps.rb:168 +#: src/include/auth-server/helps.rb:168 msgid "" "<p>Use <b>Add</b> to define indexing options for a new attribute,\n" "<b>Delete</b> to delete an existing index and <b>Edit</b> to change the\n" @@ -1058,13 +964,11 @@ "기존 인덱스를 삭제하려면 <b>삭제</b>를 사용하고, 이미 인덱싱된 특성의\n" "인덱싱 옵션을 변경하려면 <b>편집</b>을 사용하십시오.</p>\n" -#: src/include/auth-server/helps.rb:173 +#: src/include/auth-server/helps.rb:173 msgid "" -"<p>Note: Depending on the database size it can take a while until newly " -"added\n" +"<p>Note: Depending on the database size it can take a while until newly added\n" "indexes will get active on a database. After the configuration has been\n" -"written to the server, a background task will start to generate the " -"indexing\n" +"written to the server, a background task will start to generate the indexing\n" "information for the database.</p>\n" msgstr "" "<p>참고: 데이터베이스 크기에 따라 새로 추가된 인덱스가 데이터베이스에서\n" @@ -1072,11 +976,11 @@ "기록된 후 백그라운드 작업에서 데이터베이스에 대한\n" "인덱싱 정보를 생성하기 시작합니다.</p>\n" -#: src/include/auth-server/helps.rb:179 +#: src/include/auth-server/helps.rb:179 msgid "<h3>Access Control Configuration</h3>" msgstr "<h3>액세스 제어 구성</h3>" -#: src/include/auth-server/helps.rb:182 +#: src/include/auth-server/helps.rb:182 msgid "" "<p>This table gives you an overview of all Access Control rules that are\n" "currently configured for the selected database</p>\n" @@ -1084,19 +988,17 @@ "<p>이 테이블은 현재 선택한 데이터베이스에 대해 구성된\n" "모든 액세스 제어 규칙의 개요를 제공합니다.</p>\n" -#: src/include/auth-server/helps.rb:185 +#: src/include/auth-server/helps.rb:185 msgid "" -"<p>For each rule, you can see which target objects it matches. To see a " -"more\n" +"<p>For each rule, you can see which target objects it matches. To see a more\n" "detailed view of a rule or to change one, select the rule in the table and\n" "click <b>Edit</b>.</p>\n" msgstr "" -"<p>각 규칙에 대해 일치하는 대상 객체를 확인할 수 있습니다. 규칙의 상세 보기" -"를\n" +"<p>각 규칙에 대해 일치하는 대상 객체를 확인할 수 있습니다. 규칙의 상세 보기를\n" "확인하거나 규칙을 변경하려면 테이블에서 해당 규칙을 선택하고\n" "<b>편집</b>을 클릭하십시오.</p>\n" -#: src/include/auth-server/helps.rb:190 +#: src/include/auth-server/helps.rb:190 msgid "" "<p>Use <b>Add</b> to create new access control rules and <b>Delete</b> to\n" "delete an access control rule.</p>\n" @@ -1104,13 +1006,11 @@ "<p>새 액세스 제어 규칙을 생성하려면 <b>추가</b>를 사용하고,\n" "액세스 제어 규칙을 삭제하려면 <b>삭제</b>를 사용하십시오.</p>\n" -#: src/include/auth-server/helps.rb:193 +#: src/include/auth-server/helps.rb:193 msgid "" -"<p>OpenLDAP's access control evaluation stops at the first rule whose " -"target\n" +"<p>OpenLDAP's access control evaluation stops at the first rule whose target\n" "definition (DN, filter and attributes) matches the entry being\n" -"accessed. Therefore you should order the rules according to your needs, " -"using\n" +"accessed. Therefore you should order the rules according to your needs, using\n" "the <b>Up</b> and <b>Down</b> buttons.</p>\n" msgstr "" "<p>OpenLDAP의 액세스 제어 평가는 대상\n" @@ -1118,99 +1018,81 @@ "첫 번째 규칙에서 중지됩니다. 따라서 <b>위로</b> 및 <b>아래로</b> 버튼을\n" "사용하여 요구에 따라 규칙 순서를 지정해야 합니다.</p>\n" -#: src/include/auth-server/helps.rb:199 +#: src/include/auth-server/helps.rb:199 msgid "<h3>Replication Provider Settings</h3>" msgstr "<h3>복제 공급자 설정</h3>" -#: src/include/auth-server/helps.rb:202 +#: src/include/auth-server/helps.rb:202 msgid "" -"<p>Select the \"<b>Enable ldapsync provider for this database</b>\" " -"checkbox, if you want to \n" +"<p>Select the \"<b>Enable ldapsync provider for this database</b>\" checkbox, if you want to \n" "be able to replicate the currently selected database to another server.</p>" msgstr "" "<p>현재 선택한 데이터베이스를 다른 서버로 복제할 수 있으려면\n" -"\"<b>이 데이터베이스에 대한 LDAPsync 공급자 활성화</b>\" 확인란을 선택하십시" -"오.</p>" +"\"<b>이 데이터베이스에 대한 LDAPsync 공급자 활성화</b>\" 확인란을 선택하십시오.</p>" -#: src/include/auth-server/helps.rb:205 +#: src/include/auth-server/helps.rb:205 msgid "<h4>Checkpoint Settings</h4>" msgstr "<h4>체크포인트 설정</h4>" -#: src/include/auth-server/helps.rb:206 +#: src/include/auth-server/helps.rb:206 msgid "" -"<p>Here you can specify how often the synchronization state indicator " -"(stored\n" -"in the \"<i>contextCSN</i>\"-Attribute) is written to the database. It is " -"synced\n" -"to the database after the number of write \"<i>Operations</i>\" you specify " -"or\n" -"after more than the specified \"<i>Minutes</i>\" have passed since the " -"indicator\n" -"has last been written. By default (both values are '0') the state indicator " -"is\n" +"<p>Here you can specify how often the synchronization state indicator (stored\n" +"in the \"<i>contextCSN</i>\"-Attribute) is written to the database. It is synced\n" +"to the database after the number of write \"<i>Operations</i>\" you specify or\n" +"after more than the specified \"<i>Minutes</i>\" have passed since the indicator\n" +"has last been written. By default (both values are '0') the state indicator is\n" "only written after a clean shutdown. Writing it more often can result in\n" "a faster startup time after an unclean shutdown but might result in a small\n" "performance hit in environments with many LDAP write operations.</p>\n" msgstr "" "<p>여기서는 동기화 상태 표시기(\"<i>contextCSN</i>\"\n" -"특성에 저장됨)가 데이터베이스에 기록되는 빈도를 지정할 수 있습니다. 지정한 횟" -"수의\n" +"특성에 저장됨)가 데이터베이스에 기록되는 빈도를 지정할 수 있습니다. 지정한 횟수의\n" "쓰기 \"<i>작업</i>\" 후 또는\n" "표시기가 마지막으로 기록된 이후 경과한 시간이 지정된 \"<i>분</i>\"을\n" -"초과한 후 데이터베이스에 동기화됩니다. 기본적으로(두 값이 모두 '0'임) 상태 표" -"시기는\n" +"초과한 후 데이터베이스에 동기화됩니다. 기본적으로(두 값이 모두 '0'임) 상태 표시기는\n" "완전히 종료된 후에만 기록됩니다. 더 자주 쓰면\n" "불완전하게 종료된 후에 시작 시간이 빨라질 수 있지만\n" "LDAP 쓰기 작업이 많은 환경에서 성능이 약간 저하될 수도 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:216 +#: src/include/auth-server/helps.rb:216 msgid "<h4>Session log</h4>" msgstr "<h4>세션 로그</h4>" -#: src/include/auth-server/helps.rb:217 +#: src/include/auth-server/helps.rb:217 msgid "" -"<p>Configures an in-memory session log for recording information about write " -"operations\n" -"made on the database. Specify how many write operation should be recorded in " -"the session log. \n" -"Configuring a session log is only useful for \"<i>refreshOnly</i>\" " -"replication. In \n" -"such a case it can speed up replication and reduce the load on the master " -"server.</p>" +"<p>Configures an in-memory session log for recording information about write operations\n" +"made on the database. Specify how many write operation should be recorded in the session log. \n" +"Configuring a session log is only useful for \"<i>refreshOnly</i>\" replication. In \n" +"such a case it can speed up replication and reduce the load on the master server.</p>" msgstr "" "<p>데이터베이스에 작성된 쓰기 작업 관련 정보를 기록하기 위한\n" -"메모리 내 세션 로그를 구성합니다. 세션 로그에 기록할 쓰기 작업 수를 지정하십" -"시오. \n" -"세션 로그를 구성하는 것은 \"<i>refreshOnly</i>\" 복제가 사용될 때만 가능합니" -"다. \n" +"메모리 내 세션 로그를 구성합니다. 세션 로그에 기록할 쓰기 작업 수를 지정하십시오. \n" +"세션 로그를 구성하는 것은 \"<i>refreshOnly</i>\" 복제가 사용될 때만 가능합니다. \n" "이 경우 복제 속도가 빨라지고 마스터 서버의 로드가 줄어들 수 있습니다.</p>" -#: src/include/auth-server/helps.rb:223 +#: src/include/auth-server/helps.rb:223 msgid "<h3>Replication Consumer Settings</h3>" msgstr "<h3>복제 소비자 설정</h3>" -#: src/include/auth-server/helps.rb:226 +#: src/include/auth-server/helps.rb:226 msgid "" -"<p>Select \"<b>This database is a Replication Consumer</b>\" if you want " -"the\n" +"<p>Select \"<b>This database is a Replication Consumer</b>\" if you want the\n" "database to be a replica of a database on another server.</p>\n" msgstr "" -"<p>데이터베이스를 다른 서버에 있는 데이터베이스의 복제본으로 생성하려는 경" -"우\n" +"<p>데이터베이스를 다른 서버에 있는 데이터베이스의 복제본으로 생성하려는 경우\n" "\"<b>이 데이터베이스는 복제 소비자입니다.</b>\"를 선택하십시오.</p>\n" -#: src/include/auth-server/helps.rb:229 +#: src/include/auth-server/helps.rb:229 msgid "<h4>Provider</h4>" msgstr "<h4>공급자</h4>" -#: src/include/auth-server/helps.rb:230 +#: src/include/auth-server/helps.rb:230 msgid "" "Enter the connection details for the replication connection to the master\n" "server here. Select the protocol to use (<b>ldap</b> or <b>ldaps</b>) and\n" "enter the fully qualified hostname of the master server. It is important to\n" "use the fully qualified hostname to verify the master server's TLS/SSL\n" -"certificate. Adjust the port number if the master server is using non-" -"standard\n" +"certificate. Adjust the port number if the master server is using non-standard\n" "ldap ports.\n" msgstr "" "여기에 마스터 서버에 대한 복제 연결의 연결 세부 사항을\n" @@ -1220,15 +1102,15 @@ "인증서를 확인하는 것이 중요합니다. 마스터 서버에서 비표준 LDAP 포트를\n" "사용하는 경우 포트 번호를 조정하십시오.\n" -#: src/include/auth-server/helps.rb:238 +#: src/include/auth-server/helps.rb:238 msgid "<h4>Replication Type</h4>" msgstr "<h4>복제 유형</h4>" -#: src/include/auth-server/helps.rb:239 +#: src/include/auth-server/helps.rb:239 msgid "<p>OpenLDAP supports different modes of replication:</p>" msgstr "<p>OpenLDAP은 다른 복제 모드를 지원함:</p>" -#: src/include/auth-server/helps.rb:240 +#: src/include/auth-server/helps.rb:240 msgid "" "<p><b>refreshOnly</b>: The slave server will periodically open a new\n" "connection, trigger a synchronization and close the connection again. The\n" @@ -1240,60 +1122,52 @@ "<b>복제 간격</b> 설정을 통해 이 동기화가 발생하는 간격을\n" "구성할 수 있습니다.</p>\n" -#: src/include/auth-server/helps.rb:246 +#: src/include/auth-server/helps.rb:246 msgid "" "<p><b>refreshAndPersist</b>: The slave server will open a persistent\n" "connection to the master server for synchronization. Updated entries on the\n" "master server are immediately sent to the slave via this connection.</p>\n" msgstr "" -"<p><b>refreshAndPersist</b>: 슬레이브 서버에서 동기화를 위해 마스터 서버에 대" -"한\n" +"<p><b>refreshAndPersist</b>: 슬레이브 서버에서 동기화를 위해 마스터 서버에 대한\n" "영구적 연결을 엽니다. 이 연결을 통해 마스터 서버의\n" "업데이트된 항목이 슬레이브로 즉시 전송됩니다.</p>\n" -#: src/include/auth-server/helps.rb:251 +#: src/include/auth-server/helps.rb:251 msgid "<h4>Authentication</h4>" msgstr "<h4>인증</h4>" -#: src/include/auth-server/helps.rb:252 +#: src/include/auth-server/helps.rb:252 msgid "" -"<p>Specify a DN and password which the slave server should use to " -"authenticate against the master.\n" -"The specified DN needs to have read access to all entries in the replicated " -"database on the master.</p>\n" +"<p>Specify a DN and password which the slave server should use to authenticate against the master.\n" +"The specified DN needs to have read access to all entries in the replicated database on the master.</p>\n" msgstr "" -"<p>슬레이브 서버에서 마스터에 대해 인증하는 데 사용할 DN 및 비밀번호를 지정하" -"십시오.\n" -"지정한 DN에 마스터의 복제된 데이터베이스에 있는 모든 항목에 대한 읽기 권한이 " -"있어야 합니다.</p>\n" +"<p>슬레이브 서버에서 마스터에 대해 인증하는 데 사용할 DN 및 비밀번호를 지정하십시오.\n" +"지정한 DN에 마스터의 복제된 데이터베이스에 있는 모든 항목에 대한 읽기 권한이 있어야 합니다.</p>\n" -#: src/include/auth-server/helps.rb:255 +#: src/include/auth-server/helps.rb:255 msgid "<h4>Update Referral</h4>" msgstr "<h4>업데이트 조회</h4>" -#: src/include/auth-server/helps.rb:256 +#: src/include/auth-server/helps.rb:256 msgid "" "<p>As the slave database is readonly, the slave server will answer write\n" "operations with an LDAP referral. \n" -"By default, this referral points the client to the master server. You can " -"configure a different update referral here.\n" -"This is e.g. useful in a cascaded replication setup where the provider for " -"the\n" +"By default, this referral points the client to the master server. You can configure a different update referral here.\n" +"This is e.g. useful in a cascaded replication setup where the provider for the\n" "slave server is as slave server too. </p>\n" msgstr "" "<p>슬레이브 데이터베이스는 읽기 전용이므로 슬레이브 서버는\n" "LDAP 조회를 사용하여 쓰기 작업에 응답합니다. \n" -"기본적으로 이 조회는 클라이언트를 마스터 서버로 가리킵니다. 여기서 다른 업데" -"이트 조회를 구성할 수 있습니다.\n" +"기본적으로 이 조회는 클라이언트를 마스터 서버로 가리킵니다. 여기서 다른 업데이트 조회를 구성할 수 있습니다.\n" "예를 들어 이 기능은 슬레이브 서버에 대한 공급자도 슬레이브 서로 있는\n" "계단식 복제 설정에 유용합니다. </p>\n" -#. Read dialog help -#: src/include/auth-server/helps.rb:264 +#. Read dialog help +#: src/include/auth-server/helps.rb:264 msgid "<p><b><big>Initializing LDAP Server Configuration</big></b></p>" msgstr "<p><b><big>LDAP 서버 구성 초기화</big></b></p>" -#: src/include/auth-server/helps.rb:267 +#: src/include/auth-server/helps.rb:267 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>" @@ -1301,12 +1175,12 @@ "<p><b><big>초기화 중단</big></b><br>\n" "유틸리티를 안전하게 중단하려면 <b>중단</b>을 눌르십시오.</p>" -#. Write dialog help -#: src/include/auth-server/helps.rb:271 +#. Write dialog help +#: src/include/auth-server/helps.rb:271 msgid "<p><b><big>Saving LDAP Server Configuration</big></b></p> \n" msgstr "<p><b><big>LDAP 서버 구성 저장</big></b></p> \n" -#: src/include/auth-server/helps.rb:274 +#: src/include/auth-server/helps.rb:274 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>. An additional dialog\n" @@ -1316,12 +1190,12 @@ "<b>중단</b>을 눌러 저장 절차를 중단합니다. 추가 대화 상자에서\n" "중단해도 안전한지 여부를 알려줍니다.</p>\n" -#. Summary dialog help 1/3 -#: src/include/auth-server/helps.rb:280 +#. Summary dialog help 1/3 +#: src/include/auth-server/helps.rb:280 msgid "<h3>LDAP Server Configuration Summary</h3>" msgstr "<h3>LDAP 서버 구성 요약</h3>" -#: src/include/auth-server/helps.rb:283 +#: src/include/auth-server/helps.rb:283 msgid "" "<p>This dialog provides a short summary about the configuration you have\n" "created. Click <b>Finish</b> to write the configuration and leave the LDAP\n" @@ -1331,24 +1205,16 @@ "제공합니다. <b>완료</b>를 클릭하여 구성을 쓰고 LDAP\n" "서버 모듈을 종료하십시오.</p>\n" -#. Configuration Wizard Step 1 -#: src/include/auth-server/helps.rb:289 -msgid "" -"<p>With <b>Start LDAP Server Yes or No</b>, start or stop the LDAP server. " -msgstr "" -"<p><b>LDAP 서버 시작 예 또는 아니오</b>를 사용하여 LDAP 서버를 시작하거나 중" -"지합니다.</p>" +#. Configuration Wizard Step 1 +#: src/include/auth-server/helps.rb:289 +msgid "<p>With <b>Start LDAP Server Yes or No</b>, start or stop the LDAP server.</p> " +msgstr "<p><b>LDAP 서버 시작 예 또는 아니오</b>를 사용하여 LDAP 서버를 시작하거나 중지합니다.</p>" -#: src/include/auth-server/helps.rb:292 -msgid "" -"<p>If you select <b>Yes</b>, click <b>Next</b> to start the configuration " -"wizard.</p>" -msgstr "" -"<p><b>예</b>를 선택하는 경우 <b>다음</b>을 클릭하여 구성 마법사를 시작하십시" -"오.</p>" +#: src/include/auth-server/helps.rb:292 +msgid "<p>If you select <b>Yes</b>, click <b>Next</b> to start the configuration wizard.</p>" +msgstr "<p><b>예</b>를 선택하는 경우 <b>다음</b>을 클릭하여 구성 마법사를 시작하십시오.</p>" -#: src/include/auth-server/helps.rb:295 +#: src/include/auth-server/helps.rb:295 msgid "" "<p>If the Firewall is enabled, open the required network ports\n" "for OpenLDAP by checking the corresponding checkbox.</p>\n" @@ -1356,53 +1222,45 @@ "<p>방화벽이 활성화된 경우 해당 확인란을 선택하여 OpenLDAP에 필요한\n" "네트워크 포트를 여십시오.</p>\n" -#. Configuration Wizard Step 2 -#: src/include/auth-server/helps.rb:299 -msgid "" -"<p>Select the type of LDAP server you want to setup. The following scenarios " -"are available:</p>" -msgstr "" -"<p>설정하려는 LDAP 서버 유형을 선택하십시오. 다음 시나리오를 사용할 수 있습니" -"다.</p>" +#. Configuration Wizard Step 2 +#: src/include/auth-server/helps.rb:299 +msgid "<p>Select the type of LDAP server you want to setup. The following scenarios are available:</p>" +msgstr "<p>설정하려는 LDAP 서버 유형을 선택하십시오. 다음 시나리오를 사용할 수 있습니다.</p>" -#: src/include/auth-server/helps.rb:302 +#: src/include/auth-server/helps.rb:302 msgid "" -"<p><b>Stand-alone server</b>: Setup a single stand-alone OpenLDAP server " -"with\n" +"<p><b>Stand-alone server</b>: Setup a single stand-alone OpenLDAP server with\n" "no preparations for replication.</p>\n" msgstr "" "<p><b>독립형 서버</b>: 복제 준비 없이 단일 독립형 OpenLDAP 서버를\n" "설정합니다.</p>\n" -#: src/include/auth-server/helps.rb:305 +#: src/include/auth-server/helps.rb:305 msgid "" "<p><b>Master server in a replication setup</b>: Create an OpenLDAP setup\n" "prepared to act as a master server (provider) in a replication setup.</p>\n" msgstr "" -"<p><b>복제 설정의 마스터 서버</b>: 복제 설정의 마스터 서버(공급자)로 작동하도" -"록 준비된\n" +"<p><b>복제 설정의 마스터 서버</b>: 복제 설정의 마스터 서버(공급자)로 작동하도록 준비된\n" "OpenLDAP 설정을 생성합니다.</p>\n" -#: src/include/auth-server/helps.rb:308 +#: src/include/auth-server/helps.rb:308 msgid "" -"<p><b>Replica slave server</b>: Setup an OpenLDAP slave server that " -"replicates all its data,\n" +"<p><b>Replica slave server</b>: Setup an OpenLDAP slave server that replicates all its data,\n" "including configuration, from a master server.</p>" msgstr "" -"<p><b>복제 종속 서버</b>: 마스터 서버에서 구성을 포함한 모든 데이터를 복제하" -"는\n" +"<p><b>복제 종속 서버</b>: 마스터 서버에서 구성을 포함한 모든 데이터를 복제하는\n" "OpenLDAP 종속 서버를 설정합니다.</p>" -#. Configuration Wizard Step 3 -#: src/include/auth-server/helps.rb:312 +#. Configuration Wizard Step 3 +#: src/include/auth-server/helps.rb:312 msgid "<h3>TLS Settings</h3>" msgstr "<h3>TLS 설정</h3>" -#: src/include/auth-server/helps.rb:315 +#: src/include/auth-server/helps.rb:315 msgid "<h4>Basic Settings</h4>" msgstr "<h4>기본 설정</h4>" -#: src/include/auth-server/helps.rb:316 +#: src/include/auth-server/helps.rb:316 msgid "" "<p>To enable encryption via TLS/SSL, check the <b>Enabled TLS</b>\n" "checkbox. Additionally you need to configure a certificate for the Server \n" @@ -1412,40 +1270,34 @@ "확인란을 선택하십시오. 또한 사용할 서버에 대한 인증서를 \n" "구성해야 합니다.</p>\n" -#: src/include/auth-server/helps.rb:321 +#: src/include/auth-server/helps.rb:321 msgid "" -"<p>Check <b>Enable LDAP over SSL (ldaps) interface</b>, to enable the " -"server\n" +"<p>Check <b>Enable LDAP over SSL (ldaps) interface</b>, to enable the server\n" "to accept LDAPS connections on port 636. If not checked, OpenLDAP will only\n" -"support TLS encrypted connections through the StartTLS extended operation.\n" +"support TLS encrypted connections through the StartTLS extended operation.</p>\n" msgstr "" -"<p>서버가 포트 636에서 LDAPS 연결을 수락할 수 있게 하려면 <b>SSL상의 LDAP" -"(ldaps) 인터페이스 활성화</b>를 선택하십시오. 선택하지 않으면 OpenLDAP는\n" +"<p>서버가 포트 636에서 LDAPS 연결을 수락할 수 있게 하려면 <b>SSL상의 LDAP(ldaps) 인터페이스 활성화</b>를 선택하십시오. 선택하지 않으면 OpenLDAP는\n" "StartTLS 확장 작업을 통해 TLS 암호화된 연결만 지원합니다.</p>\n" -#: src/include/auth-server/helps.rb:326 +#: src/include/auth-server/helps.rb:326 msgid "" "<p>If you already have a common server certificate installed using the\n" -"corresponding YaST Module, check <b>Use common Server Certificate</b> so " -"that\n" +"corresponding YaST Module, check <b>Use common Server Certificate</b> so that\n" "the OpenLDAP server uses this certificate.</p>\n" msgstr "" "<p>해당 YaST 모듈을 사용하여 일반 서버 인증서가 이미\n" "설치되어 있는 경우 OpenLDAP 서버에서 이 인증서를 사용하도록\n" "<b>일반 서버 인증서 사용</b>을 선택하십시오.</p>\n" -#: src/include/auth-server/helps.rb:331 +#: src/include/auth-server/helps.rb:331 msgid "<h4>Import Certificate</h4>" msgstr "<h4>인증서 임포트</h4>" -#: src/include/auth-server/helps.rb:332 +#: src/include/auth-server/helps.rb:332 msgid "" "<p>If you have no common server certificate or you want OpenLDAP to use a\n" -"different certificate, enter the file names of the <b>CA Certificate File,\n" -"<b>Certificate File</b> and <b>Certificate Key File</b> into the " -"corresponding\n" +"different certificate, enter the file names of the <b>CA Certificate File</b>,\n" +"<b>Certificate File</b> and <b>Certificate Key File</b> into the corresponding\n" "textfields.</p>\n" msgstr "" "<p>일반 서버 인증서가 없거나 OpenLDAP에서\n" @@ -1453,7 +1305,7 @@ "<b>인증서 파일</b> 및 <b>인증서 키 파일</b>의 파일 이름을 해당\n" "텍스트 필드에 입력하십시오.</p>\n" -#: src/include/auth-server/helps.rb:338 +#: src/include/auth-server/helps.rb:338 msgid "" "<p>To create a new CA or certificate, launch the CA management module by\n" "clicking <b>Launch CA Management Module</b>.</p>\n" @@ -1461,82 +1313,67 @@ "<p>새 CA 또는 인증서를 생성하려면 <b>CA 관리 모듈 시작</b>을\n" "클릭하여 CA 관리 모듈을 시작하십시오.</p>\n" -#. Tree Item Dialog "global" 1/1 -#: src/include/auth-server/helps.rb:342 +#. Tree Item Dialog "global" 1/1 +#: src/include/auth-server/helps.rb:342 msgid "<p>Below this item, configure some global parameters.</p>" msgstr "<p>이 항목 아래에서 몇몇 전역 매개변수를 구성합니다.</p>" -#. Tree Item Dialog "schema" 1/ -#: src/include/auth-server/helps.rb:346 +#. Tree Item Dialog "schema" 1/ +#: src/include/auth-server/helps.rb:346 msgid "" -"<p>Add schema files in this dialog. Press <b>Add</b> to open a file dialog " -"in which to choose\n" -"a new schema. Note: OpenLDAP (when used with back-config) does currently not " -"support the removal of \n" +"<p>Add schema files in this dialog. Press <b>Add</b> to open a file dialog in which to choose\n" +"a new schema. Note: OpenLDAP (when used with back-config) does currently not support the removal of \n" "Schema Data</p>" msgstr "" -"<p>이 대화 상자에서 스키마 파일을 추가합니다. <b>추가</b>를 눌러 새 스키마를 " -"선택할 파일 대화 상자를 엽니다.\n" +"<p>이 대화 상자에서 스키마 파일을 추가합니다. <b>추가</b>를 눌러 새 스키마를 선택할 파일 대화 상자를 엽니다.\n" "참고: back-config와 함께 사용할 때 현재 OpenLDAP는 스키마 데이터의 제거를\n" "지원하지 않습니다.</p>" -#. Tree Item Dialog "loglevel" -#: src/include/auth-server/helps.rb:352 +#. Tree Item Dialog "loglevel" +#: src/include/auth-server/helps.rb:352 msgid "" -"<p>Select the subsystems that should log debugging statements and " -"statistics\n" +"<p>Select the subsystems that should log debugging statements and statistics\n" "to syslog.</p>" msgstr "" "<p>syslog에 디버깅 설명 및 통계를 로깅해야 하는 하위 시스템을\n" "선택하십시오.</p>" -#. Tree Item Dialog "allow" 1/1 -#: src/include/auth-server/helps.rb:356 -msgid "" -"<p>Select which special features the OpenLDAP Server should allow or " -"disallow:</p>" -msgstr "" -"<p>OpenLDAP 서버에서 허용하거나 허용하지 않을 특수 기능을 선택하십시오.</p>" +#. Tree Item Dialog "allow" 1/1 +#: src/include/auth-server/helps.rb:356 +msgid "<p>Select which special features the OpenLDAP Server should allow or disallow:</p>" +msgstr "<p>OpenLDAP 서버에서 허용하거나 허용하지 않을 특수 기능을 선택하십시오.</p>" -#: src/include/auth-server/helps.rb:359 +#: src/include/auth-server/helps.rb:359 msgid "<h3>Select Allow Flags</h3>" msgstr "<h3>허용 플래그 선택</h3>" -#: src/include/auth-server/helps.rb:360 +#: src/include/auth-server/helps.rb:360 msgid "" -"<p><b>LDAPv2 Bind Requests</b>: To let the server accept LDAPv2 bind " -"requests.\n" +"<p><b>LDAPv2 Bind Requests</b>: To let the server accept LDAPv2 bind requests.\n" "Note that OpenLDAP does not truly implement LDAPv2.</p>\n" msgstr "" -"<p><b>LDAPv2 바인드 요청</b>: 서버가 LDAPv2 바인드 요청을 수락할 수 있게 합니" -"다.\n" +"<p><b>LDAPv2 바인드 요청</b>: 서버가 LDAPv2 바인드 요청을 수락할 수 있게 합니다.\n" "OpenLDAP는 실제로 LDAPv2를 구현하지 않습니다.</p>\n" -#: src/include/auth-server/helps.rb:363 +#: src/include/auth-server/helps.rb:363 msgid "" -"<p><b>Anonymous Bind when credentials not empty</b>: To allow anonymous bind " -"when \n" -"credentials are not empty (i.e. password is present but bind DN is not " -"present) </p>" +"<p><b>Anonymous Bind when credentials not empty</b>: To allow anonymous bind when \n" +"credentials are not empty (i.e. password is present but bind DN is not present) </p>" msgstr "" -"<p><b>자격 증명이 비어 있지 않을 경우 익명 바인드</b>: 자격 증명이 비어 있지 " -"않을 경우\n" -"익명 바인드를 허용하도록 하는 방법입니다(예: 비밀번호는 있지만 바인드 DN은 없" -"음). </p>" +"<p><b>자격 증명이 비어 있지 않을 경우 익명 바인드</b>: 자격 증명이 비어 있지 않을 경우\n" +"익명 바인드를 허용하도록 하는 방법입니다(예: 비밀번호는 있지만 바인드 DN은 없음). </p>" -#: src/include/auth-server/helps.rb:366 +#: src/include/auth-server/helps.rb:366 msgid "" "<p><b>Unauthenticated Bind when DN not empty</b>: To allow unauthenticated \n" "(anonymous) binds when DN is not empty</p>" msgstr "" -"<p><b>DN이 비어 있지 않을 경우 인증되지 않은 바인드</b>: DN이 비어 있지 않을 " -"경우\n" +"<p><b>DN이 비어 있지 않을 경우 인증되지 않은 바인드</b>: DN이 비어 있지 않을 경우\n" "인증되지 않은(익명) 바인드를 허용하도록 하는 방법입니다.</p>" -#: src/include/auth-server/helps.rb:369 +#: src/include/auth-server/helps.rb:369 msgid "" -"<p><b>Unauthenticated Update Operations to process</b>: To allow " -"unauthenticated\n" +"<p><b>Unauthenticated Update Operations to process</b>: To allow unauthenticated\n" "(anonymous) update operations to be processed. They are still subject to\n" "access controls and other administrative limits.</p>\n" msgstr "" @@ -1544,11 +1381,11 @@ "(익명) 업데이트 작업을 처리할 수 있게 합니다. 액세스 제어 및\n" "기타 관리 한도는 여전히 적용됩니다.</p>\n" -#: src/include/auth-server/helps.rb:374 +#: src/include/auth-server/helps.rb:374 msgid "<h3>Select Disallow Flags</h3>" msgstr "<h3>허용 안 함 플래그 선택</h3>" -#: src/include/auth-server/helps.rb:375 +#: src/include/auth-server/helps.rb:375 msgid "" "<p><b>Disable acceptance of anonymous Bind Requests</b>: The Server will\n" "not accept anonymous bind requests. Note that this does not generally\n" @@ -1558,27 +1395,25 @@ "익명 바인드 요청을 수락하지 않습니다. 일반적으로\n" "익명 디렉토리 액세스는 차단되지 않습니다.</p>\n" -#: src/include/auth-server/helps.rb:380 +#: src/include/auth-server/helps.rb:380 msgid "" -"<p><b>Disable Simple Bind authentication</b>: Completely disable Simple " -"Bind\n" +"<p><b>Disable Simple Bind authentication</b>: Completely disable Simple Bind\n" "authentication</p>\n" msgstr "" "<p><b>단순 바인드 인증 비활성화</b>: 단순 바인드 인증을\n" "완전히 비활성화합니다.</p>\n" -#: src/include/auth-server/helps.rb:383 +#: src/include/auth-server/helps.rb:383 msgid "" "<p><b>Disable forcing session to anonymous status upon StartTLS operation\n" -"receipt</b>: The server will no longer force an authenticated connection " -"back\n" +"receipt</b>: The server will no longer force an authenticated connection back\n" "to the anonymous state when receiving the StartTLS operation.</p>\n" msgstr "" "<p><b>TLS 작업 수신 시 세션을 익명 상태로 강제\n" "비활성화</b>: 서버가 StartTLS 작업을 수신할 때 인증된 연결을 익명 상태로\n" "다시 강제 적용하지 않습니다.</p>\n" -#: src/include/auth-server/helps.rb:388 +#: src/include/auth-server/helps.rb:388 msgid "" "<p><b>Disallow the StartTLS operation if authenticated</b>:\n" "The server will not allow the StartTLS operation on already authenticated\n" @@ -1588,1378 +1423,1230 @@ "서버가 이미 인증된 연결에서 StartTLS 작업을\n" "허용하지 않습니다.</p>\n" -#. Tree Item Dialog "databases" -#: src/include/auth-server/helps.rb:394 +#. Tree Item Dialog "databases" +#: src/include/auth-server/helps.rb:394 msgid "" "<p>This lists shows all configured databases. The databases with the type\n" -"\"frontend\" and \"config\" represent special internal databases. The " -"\"Frontend\"\n" -"database is use to configure global access control restrictions and " -"overlays\n" -"that apply to all databases. The \"Config\" database holds the configuration " -"of\n" +"\"frontend\" and \"config\" represent special internal databases. The \"Frontend\"\n" +"database is use to configure global access control restrictions and overlays\n" +"that apply to all databases. The \"Config\" database holds the configuration of\n" "the LDAP server itself.</p>\n" msgstr "" "<p>그러면 구성된 모든 데이터베이스가 나열됩니다.\n" -"\"프런트 엔드\" 및 \"구성\" 유형의 데이터베이스는 특수 내부 데이터베이스를 나" -"타냅니다. \"프런트 엔드\"\n" -"데이터베이스는 모든 데이터베이스에 적용되는 전역 액세스 제어 제한 및 오버레이" -"를\n" +"\"프런트 엔드\" 및 \"구성\" 유형의 데이터베이스는 특수 내부 데이터베이스를 나타냅니다. \"프런트 엔드\"\n" +"데이터베이스는 모든 데이터베이스에 적용되는 전역 액세스 제어 제한 및 오버레이를\n" "구성하는 데 사용됩니다. \"구성\" 데이터베이스에는 LDAP 서버 자체의 구성이\n" "포함됩니다.</p>\n" -#. Tree Item Dialog "databases" 2/2 -#: src/include/auth-server/helps.rb:402 +#. Tree Item Dialog "databases" 2/2 +#: src/include/auth-server/helps.rb:402 msgid "<p>To add a new database, press <b>Add Database...</b>.</p>" -msgstr "" -"<p>새 데이터베이스를 추가하려면 <b>데이터베이스 추가...</b>를 누릅니다.</p>" +msgstr "<p>새 데이터베이스를 추가하려면 <b>데이터베이스 추가...</b>를 누릅니다.</p>" -#: src/include/auth-server/helps.rb:403 +#: src/include/auth-server/helps.rb:403 msgid "" -"<p>To delete a database, select a database from the list and press <b>Delete " -"Database...</b>.\n" +"<p>To delete a database, select a database from the list and press <b>Delete Database...</b>.\n" "You cannot delete the \"config\" and \"frontend\" databases.</p>\n" msgstr "" -"<p>데이터베이스를 삭제하려면 목록에서 데이터베이스를 선택하고 <b>데이터베이" -"스 삭제...</b>를 누르십시오.\n" +"<p>데이터베이스를 삭제하려면 목록에서 데이터베이스를 선택하고 <b>데이터베이스 삭제...</b>를 누르십시오.\n" "\"구성\" 및 \"프런트 엔드\" 데이터베이스는 삭제할 수 없습니다.</p>\n" -#: src/include/auth-server/helps.rb:406 +#: src/include/auth-server/helps.rb:406 msgid "" -"<p>Enter a password for the configuration database (\"<i>cn=config</i>\") " -"here. This is required to make\n" +"<p>Enter a password for the configuration database (\"<i>cn=config</i>\") here. This is required to make\n" "the configuration database accessible remotely.</p>" msgstr "" -"<p>구성 데이터베이스(\"<i>cn=config</i>\")의 비밀번호를 입력하십시오. 이 작업" -"은 구성 데이터베이스에\n" +"<p>구성 데이터베이스(\"<i>cn=config</i>\")의 비밀번호를 입력하십시오. 이 작업은 구성 데이터베이스에\n" "원격으로 액세스할 때 필요합니다.</p>" -#: src/include/auth-server/helps.rb:409 +#: src/include/auth-server/helps.rb:409 msgid "" -"<p>If the server is supposed to participate in a MirrorMode setup, select " -"the \"<b>Prepare for MirrorMode replication</b>\"\n" -"checkbox. This will ensure that the serverId attribute is generated as " -"needed for MirrorMode replication.</p>\n" +"<p>If the server is supposed to participate in a MirrorMode setup, select the \"<b>Prepare for MirrorMode replication</b>\"\n" +"checkbox. This will ensure that the serverId attribute is generated as needed for MirrorMode replication.</p>\n" msgstr "" "<p>서버가 MirrorMode 설정에 참여하는 경우 \"<b>MirrorMode 복제 준비</b>\"\n" -"확인란을 선택하십시오. 그러면 MirrorMode 복제에 필요한 경우 serverId 특성이 " -"생성됩니다.</p>\n" +"확인란을 선택하십시오. 그러면 MirrorMode 복제에 필요한 경우 serverId 특성이 생성됩니다.</p>\n" -#: src/include/auth-server/helps.rb:412 +#: src/include/auth-server/helps.rb:412 msgid "" -"<p>To setup a slave server some details need to be queried from the master " -"server. Please enter the master\n" -"server's hostname, adjust the protocol (either \"<i>ldap</i>\" or " -"\"<i>ldaps</i>\") and port number as needed and enter the password\n" +"<p>To setup a slave server some details need to be queried from the master server. Please enter the master\n" +"server's hostname, adjust the protocol (either \"<i>ldap</i>\" or \"<i>ldaps</i>\") and port number as needed and enter the password\n" "for the master's configuration database (\"<i>cn=config</i>\").</p>" msgstr "" -"<p>슬레이브 서버를 설정하려면 일부 세부 정보를 마스터 서버에서 쿼리해야 합니" -"다. 마스터 서버의\n" -"호스트 이름을 입력하고 프로토콜(\"<i>LDAP</i>\" 또는 \"<i>LDAPS</i>\")과 포" -"트 번호를 필요에 따라 조정한 다음\n" +"<p>슬레이브 서버를 설정하려면 일부 세부 정보를 마스터 서버에서 쿼리해야 합니다. 마스터 서버의\n" +"호스트 이름을 입력하고 프로토콜(\"<i>LDAP</i>\" 또는 \"<i>LDAPS</i>\")과 포트 번호를 필요에 따라 조정한 다음\n" "마스터 구성 데이터베이스(\"<i>cn=config</i>\")의 비밀번호를 입력하십시오.</p>" -#. ########## kerberos -#. Help text: basic settings 1/2 -#: src/include/auth-server/helps.rb:419 -msgid "" -"<p>Specify the <big>Realm</big> and the <big>Master Password</big> for your " -"Kerberos server.</p>" -msgstr "" -"<p>Kerberos 서버에 대한 <big>영역</big> 및 <big>마스터 비밀번호</big>를 지정" -"하십시오.</p>" +#. ########## kerberos +#. Help text: basic settings 1/2 +#: src/include/auth-server/helps.rb:419 +msgid "<p>Specify the <big>Realm</big> and the <big>Master Password</big> for your Kerberos server.</p>" +msgstr "<p>Kerberos 서버에 대한 <big>영역</big> 및 <big>마스터 비밀번호</big>를 지정하십시오.</p>" -#. Help text: basic settings 2/2 -#: src/include/auth-server/helps.rb:423 -msgid "" -"<p>Although your Kerberos realm can be any ASCII string, the convention is " -"to use upper-case letters as in your domain name.</p>\n" -msgstr "" -"<p>Kerberos 영역은 임의의 ASCII 문자열이지만, 도메인 이름에서와 같은 대문자" -"를 사용하는 것이 규칙입니다.</p>\n" +#. Help text: basic settings 2/2 +#: src/include/auth-server/helps.rb:423 +msgid "<p>Although your Kerberos realm can be any ASCII string, the convention is to use upper-case letters as in your domain name.</p>\n" +msgstr "<p>Kerberos 영역은 임의의 ASCII 문자열이지만, 도메인 이름에서와 같은 대문자를 사용하는 것이 규칙입니다.</p>\n" -#. advanced item help: database_name -#: src/include/auth-server/helps.rb:427 -msgid "" -"<p>This string specifies the location of the Kerberos database for this " -"realm.</p>" +#. advanced item help: database_name +#: src/include/auth-server/helps.rb:427 +msgid "<p>This string specifies the location of the Kerberos database for this realm.</p>" msgstr "<p>이 영역에 대한 Kerberos 데이터베이스의 위치를 지정합니다.</p>" -#. advanced item help: acl_file -#: src/include/auth-server/helps.rb:431 -msgid "" -"<p>This string specifies the location of the access control list (ACL) file " -"that kadmin uses to determine the principals' permissions on the database." -msgstr "" -"<p>이 문자열은 kadmin이 데이터베이스에 대한 사용자 권한을 확인하는 데 사용하" -"는 ACL(액세스 제어 목록) 파일의 위치를 지정합니다.</p>" +#. advanced item help: acl_file +#: src/include/auth-server/helps.rb:431 +msgid "<p>This string specifies the location of the access control list (ACL) file that kadmin uses to determine the principals' permissions on the database.</p>" +msgstr "<p>이 문자열은 kadmin이 데이터베이스에 대한 사용자 권한을 확인하는 데 사용하는 ACL(액세스 제어 목록) 파일의 위치를 지정합니다.</p>" -#. advanced item help: admin_keytab -#: src/include/auth-server/helps.rb:435 -msgid "" -"<p>This string specifies the location of the keytab file that kadmin uses to " -"authenticate to the database.</p>" -msgstr "" -"<p>kadmin이 데이터베이스에 인증하기 위해 사용하는 keytab 파일의 위치를 지정합" -"니다.</p>" +#. advanced item help: admin_keytab +#: src/include/auth-server/helps.rb:435 +msgid "<p>This string specifies the location of the keytab file that kadmin uses to authenticate to the database.</p>" +msgstr "<p>kadmin이 데이터베이스에 인증하기 위해 사용하는 keytab 파일의 위치를 지정합니다.</p>" -#. advanced item help: default_principal_expiration -#: src/include/auth-server/helps.rb:439 -msgid "" -"<p>This absolute time specifies the default expiration date of principals " -"created in this realm.</p>" +#. advanced item help: default_principal_expiration +#: src/include/auth-server/helps.rb:439 +msgid "<p>This absolute time specifies the default expiration date of principals created in this realm.</p>" msgstr "<p>이 영역에서 생성한 기본 사용자의 만료 날짜를 지정합니다.</p>" -#. advanced item help principal_flags 1/13 -#: src/include/auth-server/helps.rb:443 -msgid "" -"<p>These flags specify the default attributes of the principal created in " -"this realm.</p>" +#. advanced item help principal_flags 1/13 +#: src/include/auth-server/helps.rb:443 +msgid "<p>These flags specify the default attributes of the principal created in this realm.</p>" msgstr "<p>이 플래그는 해당 영역에서 생성된 법칙의 기본 특성을 지정합니다.</p>" -#: src/include/auth-server/helps.rb:446 +#: src/include/auth-server/helps.rb:446 msgid "Allow postdated" msgstr "postdated 허용" -#. advanced item help principal_flags 2/13 :Allow postdated -#: src/include/auth-server/helps.rb:448 +#. advanced item help principal_flags 2/13 :Allow postdated +#: src/include/auth-server/helps.rb:448 msgid "Enabling this flag allows the principal to obtain postdateable tickets." -msgstr "" -"이 플래그를 활성화하면 사용자는 postdateable 티켓을 가져올 수 있습니다." +msgstr "이 플래그를 활성화하면 사용자는 postdateable 티켓을 가져올 수 있습니다." -#: src/include/auth-server/helps.rb:451 +#: src/include/auth-server/helps.rb:451 msgid "Allow forwardable" msgstr "전달 가능 티켓 허용" -#. advanced item help principal_flags 3/13 :Allow forwardable -#: src/include/auth-server/helps.rb:453 +#. advanced item help principal_flags 3/13 :Allow forwardable +#: src/include/auth-server/helps.rb:453 msgid "Enabling this flag allows the principal to obtain forwardable tickets." msgstr "이 플래그를 활성화하면 사용자는 전달 가능 티켓을 가져올 수 있습니다." -#: src/include/auth-server/helps.rb:456 +#: src/include/auth-server/helps.rb:456 msgid "Allow renewable" msgstr "갱신 가능 티켓 허용" -#. advanced item help principal_flags 4/13 :Allow renewable -#: src/include/auth-server/helps.rb:458 +#. advanced item help principal_flags 4/13 :Allow renewable +#: src/include/auth-server/helps.rb:458 msgid "Enabling this flag allows the principal to obtain renewable tickets." msgstr "이 플래그를 활성화하면 사용자는 갱신 가능 티켓을 가져올 수 있습니다." -#: src/include/auth-server/helps.rb:461 +#: src/include/auth-server/helps.rb:461 msgid "Allow proxiable" msgstr "프록시 티켓 허용" -#. advanced item help principal_flags 5/13 :Allow proxiable -#: src/include/auth-server/helps.rb:463 +#. advanced item help principal_flags 5/13 :Allow proxiable +#: src/include/auth-server/helps.rb:463 msgid "Enabling this flag allows the principal to obtain proxy tickets." msgstr "이 플래그를 활성화하면 사용자는 프록시 티켓을 가져올 수 있습니다." -#: src/include/auth-server/helps.rb:464 +#: src/include/auth-server/helps.rb:464 msgid "Enable user-to-user authentication" msgstr "사용자간 인증 활성화" -#. advanced item help principal_flags 6/13 :Enable user-to-user authentication -#: src/include/auth-server/helps.rb:466 -msgid "" -"Enabling this flag allows the principal to obtain a session key for another " -"user, permitting user-to-user authentication for this principal." -msgstr "" -"이 플래그를 활성화하면 사용자는 다른 사용자의 세션 키를 가져와 사용자간 인증" -"을 허용할 수 있습니다." +#. advanced item help principal_flags 6/13 :Enable user-to-user authentication +#: src/include/auth-server/helps.rb:466 +msgid "Enabling this flag allows the principal to obtain a session key for another user, permitting user-to-user authentication for this principal." +msgstr "이 플래그를 활성화하면 사용자는 다른 사용자의 세션 키를 가져와 사용자간 인증을 허용할 수 있습니다." -#: src/include/auth-server/helps.rb:469 +#: src/include/auth-server/helps.rb:469 msgid "Requires preauth" msgstr "사전 인증 요구" -#. advanced item help principal_flags 7/13 :Requires preauth -#: src/include/auth-server/helps.rb:471 -msgid "" -"If this flag is enabled on a client principal, that principal is required to " -"preauthenticate to the KDC before receiving any tickets. If you enable this " -"flag on a service principal, the service tickets for this principal will " -"only be issued to clients with a TGT that has the preauthenticated ticket " -"set." -msgstr "" -"클라이언트 사용자에서 이 플래그를 활성화하면 티켓을 받기 전에 사용자는 KDC의 " -"사전 인증을 받아야 합니다. 서비스 사용자에서 이 플래그를 활성화하면 이 사용자" -"에 대한 서비스 티켓은 사전 인증된 티켓이 설정된 TGT를 가진 클라이언트에만 발" -"급됩니다." +#. advanced item help principal_flags 7/13 :Requires preauth +#: src/include/auth-server/helps.rb:471 +msgid "If this flag is enabled on a client principal, that principal is required to preauthenticate to the KDC before receiving any tickets. If you enable this flag on a service principal, the service tickets for this principal will only be issued to clients with a TGT that has the preauthenticated ticket set." +msgstr "클라이언트 사용자에서 이 플래그를 활성화하면 티켓을 받기 전에 사용자는 KDC의 사전 인증을 받아야 합니다. 서비스 사용자에서 이 플래그를 활성화하면 이 사용자에 대한 서비스 티켓은 사전 인증된 티켓이 설정된 TGT를 가진 클라이언트에만 발급됩니다." -#: src/include/auth-server/helps.rb:474 +#: src/include/auth-server/helps.rb:474 msgid "Requires hwauth" msgstr "하드웨어 인증 요구" -#. advanced item help principal_flags 8/13 :Requires hwauth -#: src/include/auth-server/helps.rb:476 -msgid "" -"If this flag is enabled, the principal is required to preauthenticate using " -"a hardware device before receiving any tickets." -msgstr "" -"이 플래그를 활성화하면 사용자는 티켓을 받기 전에 하드웨어 장치를 사용한 사전 " -"인증이 필요합니다." +#. advanced item help principal_flags 8/13 :Requires hwauth +#: src/include/auth-server/helps.rb:476 +msgid "If this flag is enabled, the principal is required to preauthenticate using a hardware device before receiving any tickets." +msgstr "이 플래그를 활성화하면 사용자는 티켓을 받기 전에 하드웨어 장치를 사용한 사전 인증이 필요합니다." -#: src/include/auth-server/helps.rb:479 +#: src/include/auth-server/helps.rb:479 msgid "Allow service" msgstr "서비스 허용" -#. advanced item help principal_flags 9/13 :Allow service -#: src/include/auth-server/helps.rb:481 -msgid "" -"Enabling this flag allows the KDC to issue service tickets for this " -"principal." -msgstr "" -"이 플래그를 활성화하면 KDC가 이 사용자에 대한 서비스 티켓을 발급하는 것을 허" -"용합니다." +#. advanced item help principal_flags 9/13 :Allow service +#: src/include/auth-server/helps.rb:481 +msgid "Enabling this flag allows the KDC to issue service tickets for this principal." +msgstr "이 플래그를 활성화하면 KDC가 이 사용자에 대한 서비스 티켓을 발급하는 것을 허용합니다." -#: src/include/auth-server/helps.rb:484 +#: src/include/auth-server/helps.rb:484 msgid "Allow tgs request" msgstr "tgs 요청 허용" -#. advanced item help principal_flags 10/13 :Allow tgs request -#: src/include/auth-server/helps.rb:486 -msgid "" -"Enabling this flag allows a principal to obtain tickets based on a ticket-" -"granting-ticket, rather than repeating the authentication process that was " -"used to obtain the TGT." -msgstr "" -"이 플래그를 활성화하면 사용자는 TGT를 가져오기 위한 인증 순서를 반복하지 않" -"고 TGT(ticket-granting-ticket)를 기반으로 한 티켓을 가져올 수 있습니다." +#. advanced item help principal_flags 10/13 :Allow tgs request +#: src/include/auth-server/helps.rb:486 +msgid "Enabling this flag allows a principal to obtain tickets based on a ticket-granting-ticket, rather than repeating the authentication process that was used to obtain the TGT." +msgstr "이 플래그를 활성화하면 사용자는 TGT를 가져오기 위한 인증 순서를 반복하지 않고 TGT(ticket-granting-ticket)를 기반으로 한 티켓을 가져올 수 있습니다." -#: src/include/auth-server/helps.rb:489 +#: src/include/auth-server/helps.rb:489 msgid "Allow tickets" msgstr "티켓 허용" -#. advanced item help principal_flags 11/13 :Allow tickets -#: src/include/auth-server/helps.rb:491 -msgid "" -"Enabling this flag means that the KDC will issue tickets for this " -"principal. Disabling this flag essentially deactivates the principal within " -"this realm." -msgstr "" -"이 플래그를 활성화하면 KDC가 이 사용자에 대한 티켓을 발급합니다. 이 플래그를 " -"비활성화하면 이 영역의 사용자를 실제로 비활성화합니다." +#. advanced item help principal_flags 11/13 :Allow tickets +#: src/include/auth-server/helps.rb:491 +msgid "Enabling this flag means that the KDC will issue tickets for this principal. Disabling this flag essentially deactivates the principal within this realm." +msgstr "이 플래그를 활성화하면 KDC가 이 사용자에 대한 티켓을 발급합니다. 이 플래그를 비활성화하면 이 영역의 사용자를 실제로 비활성화합니다." -#: src/include/auth-server/helps.rb:494 +#: src/include/auth-server/helps.rb:494 msgid "Need change" msgstr "변경 필수" -#. advanced item help principal_flags 12/13 :Needchange -#: src/include/auth-server/helps.rb:496 +#. advanced item help principal_flags 12/13 :Needchange +#: src/include/auth-server/helps.rb:496 msgid "Enabling this flag forces a password change for this principal." msgstr "이 플래그를 활성화하면 이 사용자의 비밀번호가 강제로 변경됩니다." -#: src/include/auth-server/helps.rb:497 +#: src/include/auth-server/helps.rb:497 msgid "Password changing service" msgstr "비밀번호 변경 서비스" -#. advanced item help principal_flags 13/13 :Password changing service -#: src/include/auth-server/helps.rb:499 -msgid "" -"If this flag is enabled, it marks this principal as a password change " -"service. This should only be used in special cases, for example, if a " -"user's password has expired, the user has to get tickets for that " -"principal to be able to change it without going through the normal password " -"authentication." -msgstr "" -"이 플래그를 활성화하면 이 사용자를 비밀번호 변경 서비스로 표시합니다. 이것은 " -"특별한 경우에만 사용해야 합니다. 예를 들어 사용자 비밀번호가 만료된 경우에는 " -"해당 사용자의 티켓을 기존 비밀번호 인증을 거치지 않고 변경할 수 있어야 합니" -"다." +#. advanced item help principal_flags 13/13 :Password changing service +#: src/include/auth-server/helps.rb:499 +msgid "If this flag is enabled, it marks this principal as a password change service. This should only be used in special cases, for example, if a user's password has expired, the user has to get tickets for that principal to be able to change it without going through the normal password authentication." +msgstr "이 플래그를 활성화하면 이 사용자를 비밀번호 변경 서비스로 표시합니다. 이것은 특별한 경우에만 사용해야 합니다. 예를 들어 사용자 비밀번호가 만료된 경우에는 해당 사용자의 티켓을 기존 비밀번호 인증을 거치지 않고 변경할 수 있어야 합니다." -#. advanced item help : dict_file -#: src/include/auth-server/helps.rb:503 -msgid "" -"<p>The string location of the dictionary file containing strings that are " -"not allowed as passwords. If this tag is not set or if there is no policy " -"assigned to the principal, no check will be done.</p>" -msgstr "" -"<p>비밀번호로 허용되지 않는 문자열을 포함하는 사전 파일의 문자열 위치입니다. " -"이 태그가 설정되어 있지 않거나 법칙에 지정된 정책이 없는 경우 검사가 수행되" -"지 않습니다.</p>" +#. advanced item help : dict_file +#: src/include/auth-server/helps.rb:503 +msgid "<p>The string location of the dictionary file containing strings that are not allowed as passwords. If this tag is not set or if there is no policy assigned to the principal, no check will be done.</p>" +msgstr "<p>비밀번호로 허용되지 않는 문자열을 포함하는 사전 파일의 문자열 위치입니다. 이 태그가 설정되어 있지 않거나 법칙에 지정된 정책이 없는 경우 검사가 수행되지 않습니다.</p>" -#. advanced item help : kadmind_port -#. advanced item help : kpasswd_port -#: src/include/auth-server/helps.rb:507 src/include/auth-server/helps.rb:511 -msgid "" -"<p>This port number specifies the port on which the kadmind daemon listens " -"for this realm.</p>" -msgstr "" -"<p>이 포트 번호는 현재 영역에 대해 kadmind 데몬이 수신하는 포트를 지정합니다." -"</p>" +#. advanced item help : kadmind_port +#. advanced item help : kpasswd_port +#: src/include/auth-server/helps.rb:507 src/include/auth-server/helps.rb:511 +msgid "<p>This port number specifies the port on which the kadmind daemon listens for this realm.</p>" +msgstr "<p>이 포트 번호는 현재 영역에 대해 kadmind 데몬이 수신하는 포트를 지정합니다.</p>" -#. advanced item help : key_stash_file -#: src/include/auth-server/helps.rb:515 -msgid "" -"<p>This string specifies the location where the master key has been stored " -"with kdb5_stash.</p>" -msgstr "" -"<p>이 스트링은 마스터 키가 kdb5_stash를 사용하여 저장된 위치를 지정합니다." +#. advanced item help : key_stash_file +#: src/include/auth-server/helps.rb:515 +msgid "<p>This string specifies the location where the master key has been stored with kdb5_stash.</p>" +msgstr "<p>이 스트링은 마스터 키가 kdb5_stash를 사용하여 저장된 위치를 지정합니다.</p>" -#. advanced item help : kdc_ports -#: src/include/auth-server/helps.rb:519 -msgid "" -"<p>This string specifies the list of ports that the KDC listens to for this " -"realm.</p>" -msgstr "" -"<p>이 스트링은 현재 영역에 대해 KDC가 수신하는 포트 목록을 지정합니다.</p>" +#. advanced item help : kdc_ports +#: src/include/auth-server/helps.rb:519 +msgid "<p>This string specifies the list of ports that the KDC listens to for this realm.</p>" +msgstr "<p>이 스트링은 현재 영역에 대해 KDC가 수신하는 포트 목록을 지정합니다.</p>" -#. advanced item help : master_key_name -#: src/include/auth-server/helps.rb:523 -msgid "" -"<p>This string specifies the name of the principal associated with the " -"master key. The default value is K/M.</p>" -msgstr "" -"<p>이 스트링은 마스터 키에 관련된 사용자 이름을 지정합니다. 기본값은 K/M입니" -"다.</p>" +#. advanced item help : master_key_name +#: src/include/auth-server/helps.rb:523 +msgid "<p>This string specifies the name of the principal associated with the master key. The default value is K/M.</p>" +msgstr "<p>이 스트링은 마스터 키에 관련된 사용자 이름을 지정합니다. 기본값은 K/M입니다.</p>" -#. advanced item help : master_key_type -#: src/include/auth-server/helps.rb:527 +#. advanced item help : master_key_type +#: src/include/auth-server/helps.rb:527 msgid "<p>This key type string represents the master keys key type.</p>" msgstr "<p>이 키 유형은 마스터 키 키 유형을 나타냅니다.</p>" -#. advanced item help : max_life -#: src/include/auth-server/helps.rb:531 -msgid "" -"<p>This delta time specifies the maximum time period that a ticket may be " -"valid for in this realm.</p>" +#. advanced item help : max_life +#: src/include/auth-server/helps.rb:531 +msgid "<p>This delta time specifies the maximum time period that a ticket may be valid for in this realm.</p>" msgstr "<p>이 델타 시간은 이 영역에서 티켓의 최대 유효 기간을 지정합니다.</p>" -#. advanced item help : max_renew_life -#: src/include/auth-server/helps.rb:535 -msgid "" -"<p>This delta time specifies the maximum time period that a ticket may be " -"renewed for in this realm.</p>" +#. advanced item help : max_renew_life +#: src/include/auth-server/helps.rb:535 +msgid "<p>This delta time specifies the maximum time period that a ticket may be renewed for in this realm.</p>" msgstr "<p>이 델타 시간은 이 영역에서 티켓의 최대 갱신 기간을 지정합니다.</p>" -#. advanced item help : supported_enctypes -#: src/include/auth-server/helps.rb:539 -msgid "" -"<p>A list of key/salt strings that specifies the default key/salt " -"combinations of principals for this realm.</p>" -msgstr "" -"<p>이 영역에 대해 법칙의 기본 key/salt 조합을 지정하는 key/salt 문자열의 목록" -"입니다.</p>" +#. advanced item help : supported_enctypes +#: src/include/auth-server/helps.rb:539 +msgid "<p>A list of key/salt strings that specifies the default key/salt combinations of principals for this realm.</p>" +msgstr "<p>이 영역에 대해 법칙의 기본 key/salt 조합을 지정하는 key/salt 문자열의 목록입니다.</p>" -#. advanced item help : kdc_supported_enctypes -#: src/include/auth-server/helps.rb:543 -msgid "" -"<p>Specifies the permitted key/salt combinations of principals for this " -"realm.</p>" +#. advanced item help : kdc_supported_enctypes +#: src/include/auth-server/helps.rb:543 +msgid "<p>Specifies the permitted key/salt combinations of principals for this realm.</p>" msgstr "<p>이 영역의 사용자에 대해 허용된 key/salt 조합을 지정합니다.</p>" -#. advanced item help : reject_bad_transit -#: src/include/auth-server/helps.rb:547 -msgid "" -"<p>Specifies whether or not the list of transited realms for cross-realm " -"tickets should be checked against the transit path computed from the realm " -"names and the [capaths] section of its krb5.conf file</p>" -msgstr "" -"<p>교차 영역 티켓의 전송 목록에 대해 영역 이름에서 계산된 전송 경로와 krb5." -"conf 파일의 [capaths] 섹션에 대해 확인해야 할지 여부를 지정합니다.</p>" +#. advanced item help : reject_bad_transit +#: src/include/auth-server/helps.rb:547 +msgid "<p>Specifies whether or not the list of transited realms for cross-realm tickets should be checked against the transit path computed from the realm names and the [capaths] section of its krb5.conf file</p>" +msgstr "<p>교차 영역 티켓의 전송 목록에 대해 영역 이름에서 계산된 전송 경로와 krb5.conf 파일의 [capaths] 섹션에 대해 확인해야 할지 여부를 지정합니다.</p>" -#. advanced item help : ldap_conns_per_server -#: src/include/auth-server/helps.rb:551 -msgid "" -"<p>This LDAP specific tag indicates the number of connections to be " -"maintained via the LDAP server.</p>" -msgstr "" -"<p>이 LDAP 지정 태그는 LDAP 서버를 통해 관리할 연결 수를 나타냅니다.</p>" +#. advanced item help : ldap_conns_per_server +#: src/include/auth-server/helps.rb:551 +msgid "<p>This LDAP specific tag indicates the number of connections to be maintained via the LDAP server.</p>" +msgstr "<p>이 LDAP 지정 태그는 LDAP 서버를 통해 관리할 연결 수를 나타냅니다.</p>" -#. advanced item help : ldap_service_password_file -#: src/include/auth-server/helps.rb:555 -msgid "" -"<p>This LDAP-specific tag indicates the file containing the stashed " -"passwords for the objects used for starting the Kerberos servers.</p>" -msgstr "" -"<p>이 LDAP 특정 태그는 Kerberos 서버를 시작하는 데 사용되는 객체의 Stash 비밀" -"번호가 포함된 파일을 나타냅니다.</p>" +#. advanced item help : ldap_service_password_file +#: src/include/auth-server/helps.rb:555 +msgid "<p>This LDAP-specific tag indicates the file containing the stashed passwords for the objects used for starting the Kerberos servers.</p>" +msgstr "<p>이 LDAP 특정 태그는 Kerberos 서버를 시작하는 데 사용되는 객체의 Stash 비밀번호가 포함된 파일을 나타냅니다.</p>" -#. advanced item help : kdb_subtrees -#: src/include/auth-server/helps.rb:559 -msgid "" -"<p>Specifies the list of subtrees containing the principals of a realm. The " -"list contains the DNs of the subtree objects separated by colon(:).<p>The search scope specifies the scope for searching the principals under " -"the subtree.</p>" -msgstr "" -"<p>영역의 사용자를 포함하는 하위 트리 목록을 지정합니다. 목록에는 콜론(:)으" -"로 구분된 하위 트리 객체의 DN이 포함됩니다.</p><p>검색 범위는 하위 트리의 사" -"용자를 검색하는 범위를 지정합니다.</p>" +#. advanced item help : kdb_subtrees +#: src/include/auth-server/helps.rb:559 +msgid "<p>Specifies the list of subtrees containing the principals of a realm. The list contains the DNs of the subtree objects separated by colon(:).</p><p>The search scope specifies the scope for searching the principals under the subtree.</p>" +msgstr "<p>영역의 사용자를 포함하는 하위 트리 목록을 지정합니다. 목록에는 콜론(:)으로 구분된 하위 트리 객체의 DN이 포함됩니다.</p><p>검색 범위는 하위 트리의 사용자를 검색하는 범위를 지정합니다.</p>" -#. advanced item help : kdb_containerref -#: src/include/auth-server/helps.rb:563 -msgid "" -"<p>Specifies the DN of the container object in which the principals of a " -"realm will be created. If the container reference is not configured for a " -"realm, the principals will be created in the realm container.</p>" -msgstr "" -"<p>영역의 사용자가 생성될 컨테이너 객체의 DN을 지정합니다. 컨테이너 참조가 영" -"역에 대해 구성되지 않은 경우 사용자는 영역 컨테이너에 생성됩니다.</p>" +#. advanced item help : kdb_containerref +#: src/include/auth-server/helps.rb:563 +msgid "<p>Specifies the DN of the container object in which the principals of a realm will be created. If the container reference is not configured for a realm, the principals will be created in the realm container.</p>" +msgstr "<p>영역의 사용자가 생성될 컨테이너 객체의 DN을 지정합니다. 컨테이너 참조가 영역에 대해 구성되지 않은 경우 사용자는 영역 컨테이너에 생성됩니다.</p>" -#. advanced item help : kdb_maxtktlife -#: src/include/auth-server/helps.rb:567 +#. advanced item help : kdb_maxtktlife +#: src/include/auth-server/helps.rb:567 msgid "<p>Specifies maximum ticket life for principals in this realm.</p>" msgstr "<p>이 영역의 사용자에 대한 티켓의 최대 유효 기간을 지정합니다.</p>" -#. advanced item help : kdb_maxrenewlife -#: src/include/auth-server/helps.rb:571 -msgid "" -"<p>Specifies maximum renewable life of tickets for principals in this realm." -"</p>" -msgstr "" -"<p>이 영역의 사용자에 대한 티켓의 최대 갱신 가능 시간을 지정합니다.</p>" +#. advanced item help : kdb_maxrenewlife +#: src/include/auth-server/helps.rb:571 +msgid "<p>Specifies maximum renewable life of tickets for principals in this realm.</p>" +msgstr "<p>이 영역의 사용자에 대한 티켓의 최대 갱신 가능 시간을 지정합니다.</p>" -#. ################################################################################# -#. ################################################################################# -#. ################################################################################# -#. ################################################################################# -#. itemlist = add(itemlist, ); -#. itemlist = add(itemlist, ); -#. itemlist = add(itemlist, ); -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:49 -#: src/include/auth-server/kerberos_advanced.rb:1974 +#. ################################################################################# +#. ################################################################################# +#. ################################################################################# +#. ################################################################################# +#. itemlist = add(itemlist, ); +#. itemlist = add(itemlist, ); +#. itemlist = add(itemlist, ); +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:49 +#: src/include/auth-server/kerberos_advanced.rb:1974 msgid "Advanced Settings" msgstr "고급 설정" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:53 -#: src/include/auth-server/kerberos_advanced.rb:1885 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:53 +#: src/include/auth-server/kerberos_advanced.rb:1885 msgid "Database Path" msgstr "데이터베이스 경로" -#: src/include/auth-server/kerberos_advanced.rb:60 +#: src/include/auth-server/kerberos_advanced.rb:60 msgid "&Database Path" msgstr "데이터베이스 경로(&D)" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:71 -#: src/include/auth-server/kerberos_advanced.rb:1889 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:71 +#: src/include/auth-server/kerberos_advanced.rb:1889 msgid "ACL File" msgstr "ACL 파일" -#: src/include/auth-server/kerberos_advanced.rb:78 +#: src/include/auth-server/kerberos_advanced.rb:78 msgid "ACL &File" msgstr "ACL 파일(&F)" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:89 -#: src/include/auth-server/kerberos_advanced.rb:1893 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:89 +#: src/include/auth-server/kerberos_advanced.rb:1893 msgid "Administrator Keytab" msgstr "관리자 Keytab" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:107 -#: src/include/auth-server/kerberos_advanced.rb:1900 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:107 +#: src/include/auth-server/kerberos_advanced.rb:1900 msgid "Default Principal Expiration" msgstr "기본 사용자 만료시간" -#. checkbox text -#. checkbox text -#. checkbox text -#. checkbox text -#. checkbox text -#: src/include/auth-server/kerberos_advanced.rb:116 -#: src/include/auth-server/kerberos_advanced.rb:396 -#: src/include/auth-server/kerberos_advanced.rb:429 -#: src/include/auth-server/kerberos_advanced.rb:615 -#: src/include/auth-server/kerberos_advanced.rb:648 +#. checkbox text +#. checkbox text +#. checkbox text +#. checkbox text +#. checkbox text +#: src/include/auth-server/kerberos_advanced.rb:116 +#: src/include/auth-server/kerberos_advanced.rb:396 +#: src/include/auth-server/kerberos_advanced.rb:429 +#: src/include/auth-server/kerberos_advanced.rb:615 +#: src/include/auth-server/kerberos_advanced.rb:648 msgid "&Available" msgstr "온라인(&A)" -#: src/include/auth-server/kerberos_advanced.rb:124 -#: src/include/auth-server/kerberos_advanced.rb:129 +#: src/include/auth-server/kerberos_advanced.rb:124 +#: src/include/auth-server/kerberos_advanced.rb:129 msgid "&Date" msgstr "날짜(&D)" -#: src/include/auth-server/kerberos_advanced.rb:135 -#: src/include/auth-server/kerberos_advanced.rb:140 -#: src/include/auth-server/kerberos_advanced.rb:403 -#: src/include/auth-server/kerberos_advanced.rb:407 -#: src/include/auth-server/kerberos_advanced.rb:436 -#: src/include/auth-server/kerberos_advanced.rb:440 -#: src/include/auth-server/kerberos_advanced.rb:622 -#: src/include/auth-server/kerberos_advanced.rb:626 -#: src/include/auth-server/kerberos_advanced.rb:655 -#: src/include/auth-server/kerberos_advanced.rb:659 +#: src/include/auth-server/kerberos_advanced.rb:135 +#: src/include/auth-server/kerberos_advanced.rb:140 +#: src/include/auth-server/kerberos_advanced.rb:403 +#: src/include/auth-server/kerberos_advanced.rb:407 +#: src/include/auth-server/kerberos_advanced.rb:436 +#: src/include/auth-server/kerberos_advanced.rb:440 +#: src/include/auth-server/kerberos_advanced.rb:622 +#: src/include/auth-server/kerberos_advanced.rb:626 +#: src/include/auth-server/kerberos_advanced.rb:655 +#: src/include/auth-server/kerberos_advanced.rb:659 msgid "&Time" msgstr "시간(&T)" -#. `InputField(`opt(`hstretch),`id(`id_default_principal_expiration),"", -#. KerberosServer::getDBvalue("default_principal_expiration")), -#. Treeview list item -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:158 -#: src/include/auth-server/kerberos_advanced.rb:672 -#: src/include/auth-server/kerberos_advanced.rb:1906 -#: src/include/auth-server/kerberos_advanced.rb:2008 +#. `InputField(`opt(`hstretch),`id(`id_default_principal_expiration),"", +#. KerberosServer::getDBvalue("default_principal_expiration")), +#. Treeview list item +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:158 +#: src/include/auth-server/kerberos_advanced.rb:672 +#: src/include/auth-server/kerberos_advanced.rb:1906 +#: src/include/auth-server/kerberos_advanced.rb:2008 msgid "Default Principal Flags" msgstr "기본 사용자 플래그" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:166 -#: src/include/auth-server/kerberos_advanced.rb:680 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:166 +#: src/include/auth-server/kerberos_advanced.rb:680 msgid "Allow p&ostdated" msgstr "연기 허용(&O)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:174 -#: src/include/auth-server/kerberos_advanced.rb:688 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:174 +#: src/include/auth-server/kerberos_advanced.rb:688 msgid "Allow &forwardable" msgstr "전달 가능 허용(&F)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:182 -#: src/include/auth-server/kerberos_advanced.rb:696 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:182 +#: src/include/auth-server/kerberos_advanced.rb:696 msgid "Allow rene&wable" msgstr "재생 가능 허용(&W)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:190 -#: src/include/auth-server/kerberos_advanced.rb:704 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:190 +#: src/include/auth-server/kerberos_advanced.rb:704 msgid "Allow &proxiable" msgstr "프록시 가능 허용(&P)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:198 -#: src/include/auth-server/kerberos_advanced.rb:712 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:198 +#: src/include/auth-server/kerberos_advanced.rb:712 msgid "Enable &user-to-user authentication" msgstr "사용자 간 인증 활성화(&U)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:206 -#: src/include/auth-server/kerberos_advanced.rb:720 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:206 +#: src/include/auth-server/kerberos_advanced.rb:720 msgid "Requires pr&eauth" msgstr "사전 인증 필요(&E)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:214 -#: src/include/auth-server/kerberos_advanced.rb:728 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:214 +#: src/include/auth-server/kerberos_advanced.rb:728 msgid "Requires &hwauth" msgstr "하드웨어 인증 필요(&H)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:220 -#: src/include/auth-server/kerberos_advanced.rb:734 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:220 +#: src/include/auth-server/kerberos_advanced.rb:734 msgid "Allow &service" msgstr "서비스 허용(&S)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:226 -#: src/include/auth-server/kerberos_advanced.rb:740 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:226 +#: src/include/auth-server/kerberos_advanced.rb:740 msgid "Allow tgs re&quest" msgstr "tgs 요청 허용(&Q)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:232 -#: src/include/auth-server/kerberos_advanced.rb:746 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:232 +#: src/include/auth-server/kerberos_advanced.rb:746 msgid "Allow &tickets" msgstr "티켓 허용(&T)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:238 -#: src/include/auth-server/kerberos_advanced.rb:752 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:238 +#: src/include/auth-server/kerberos_advanced.rb:752 msgid "Need &change" msgstr "변경 필요(&C)" -#. checkbox text in MultiSelectionBox -#. checkbox text in MultiSelectionBox -#: src/include/auth-server/kerberos_advanced.rb:246 -#: src/include/auth-server/kerberos_advanced.rb:760 +#. checkbox text in MultiSelectionBox +#. checkbox text in MultiSelectionBox +#: src/include/auth-server/kerberos_advanced.rb:246 +#: src/include/auth-server/kerberos_advanced.rb:760 msgid "P&assword changing service" msgstr "비밀번호 변경 서비스(&A)" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:261 -#: src/include/auth-server/kerberos_advanced.rb:1911 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:261 +#: src/include/auth-server/kerberos_advanced.rb:1911 msgid "Dictionary File" msgstr "사전 파일" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:279 -#: src/include/auth-server/kerberos_advanced.rb:1916 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:279 +#: src/include/auth-server/kerberos_advanced.rb:1916 msgid "Kadmin Daemon Port" msgstr "Kadmin 데몬 포트" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:297 -#: src/include/auth-server/kerberos_advanced.rb:1921 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:297 +#: src/include/auth-server/kerberos_advanced.rb:1921 msgid "Kpasswd Daemon Port" msgstr "Kpasswd 데몬 포트" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:315 -#: src/include/auth-server/kerberos_advanced.rb:1926 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:315 +#: src/include/auth-server/kerberos_advanced.rb:1926 msgid "Key Stash File" msgstr "키 Stash 파일" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:333 -#: src/include/auth-server/kerberos_advanced.rb:1929 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:333 +#: src/include/auth-server/kerberos_advanced.rb:1929 msgid "KDC Port" msgstr "KDC 포트" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:351 -#: src/include/auth-server/kerberos_advanced.rb:1933 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:351 +#: src/include/auth-server/kerberos_advanced.rb:1933 msgid "Master Key Name" msgstr "마스터 키 이름" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:369 -#: src/include/auth-server/kerberos_advanced.rb:1938 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:369 +#: src/include/auth-server/kerberos_advanced.rb:1938 msgid "Master Key Type" msgstr "마스터 키 유형" -#. Treeview list item -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:387 -#: src/include/auth-server/kerberos_advanced.rb:606 -#: src/include/auth-server/kerberos_advanced.rb:1943 -#: src/include/auth-server/kerberos_advanced.rb:1998 +#. Treeview list item +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:387 +#: src/include/auth-server/kerberos_advanced.rb:606 +#: src/include/auth-server/kerberos_advanced.rb:1943 +#: src/include/auth-server/kerberos_advanced.rb:1998 msgid "Maximum Ticket Life Time" msgstr "티켓 최대 유효 시간" -#: src/include/auth-server/kerberos_advanced.rb:401 -#: src/include/auth-server/kerberos_advanced.rb:434 -#: src/include/auth-server/kerberos_advanced.rb:620 -#: src/include/auth-server/kerberos_advanced.rb:653 +#: src/include/auth-server/kerberos_advanced.rb:401 +#: src/include/auth-server/kerberos_advanced.rb:434 +#: src/include/auth-server/kerberos_advanced.rb:620 +#: src/include/auth-server/kerberos_advanced.rb:653 msgid "&Days" msgstr "일(&D)" -#. Treeview list item -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:420 -#: src/include/auth-server/kerberos_advanced.rb:639 -#: src/include/auth-server/kerberos_advanced.rb:1948 -#: src/include/auth-server/kerberos_advanced.rb:2003 +#. Treeview list item +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:420 +#: src/include/auth-server/kerberos_advanced.rb:639 +#: src/include/auth-server/kerberos_advanced.rb:1948 +#: src/include/auth-server/kerberos_advanced.rb:2003 msgid "Maximum Ticket Renew Time" msgstr "티켓 최대 갱신 시간" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:453 -#: src/include/auth-server/kerberos_advanced.rb:1953 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:453 +#: src/include/auth-server/kerberos_advanced.rb:1953 msgid "Default Encryption Types" msgstr "기본 암호화 유형" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:471 -#: src/include/auth-server/kerberos_advanced.rb:1958 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:471 +#: src/include/auth-server/kerberos_advanced.rb:1958 msgid "KDC Supported Encryption Types" msgstr "KDC가 지원하는 암호화 유형" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:489 -#: src/include/auth-server/kerberos_advanced.rb:1963 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:489 +#: src/include/auth-server/kerberos_advanced.rb:1963 msgid "Reject Bad Transit" msgstr "잘못된 전송 거부" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:507 -#: src/include/auth-server/kerberos_advanced.rb:1983 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:507 +#: src/include/auth-server/kerberos_advanced.rb:1983 msgid "Number of LDAP connections" msgstr "LDAP 연결 수" -#: src/include/auth-server/kerberos_advanced.rb:525 +#: src/include/auth-server/kerberos_advanced.rb:525 msgid "File for the LDAP password" msgstr "LDAP 비밀번호 파일" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:545 -#: src/include/auth-server/kerberos_advanced.rb:1988 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:545 +#: src/include/auth-server/kerberos_advanced.rb:1988 msgid "Search Subtrees" msgstr "하위 트리 검색" -#: src/include/auth-server/kerberos_advanced.rb:558 +#: src/include/auth-server/kerberos_advanced.rb:558 msgid "Search Scope" msgstr "검색 범위" -#: src/include/auth-server/kerberos_advanced.rb:565 +#: src/include/auth-server/kerberos_advanced.rb:565 msgid "&subtree search" msgstr "하위 트리 검색(&S)" -#: src/include/auth-server/kerberos_advanced.rb:572 +#: src/include/auth-server/kerberos_advanced.rb:572 msgid "&one level" msgstr "한 단계(&O)" -#. Treeview list item -#: src/include/auth-server/kerberos_advanced.rb:588 -#: src/include/auth-server/kerberos_advanced.rb:1993 +#. Treeview list item +#: src/include/auth-server/kerberos_advanced.rb:588 +#: src/include/auth-server/kerberos_advanced.rb:1993 msgid "Principal Container" msgstr "사용자 컨테이너" -#. ldapitems = add(ldapitems, ); -#. ldapitems = add(ldapitems, ); -#. ldapitems = add(ldapitems, ); -#: src/include/auth-server/kerberos_advanced.rb:2016 +#. ldapitems = add(ldapitems, ); +#. ldapitems = add(ldapitems, ); +#. ldapitems = add(ldapitems, ); +#: src/include/auth-server/kerberos_advanced.rb:2016 msgid "Advanced LDAP Settings" msgstr "고급 LDAP 설정" -#. encoding: utf-8 -#. File: include/ldap-server/mirrormode-wizard.ycp -#. Package: Configuration of ldap-server -#. Summary: Wizards definitions -#. Authors: Andreas Bauer -#. Ralf Haferkamp -#. -#. $Id$ -#: src/include/auth-server/mirrormode-wizard.rb:25 +#. encoding: utf-8 +#. File: include/ldap-server/mirrormode-wizard.ycp +#. Package: Configuration of ldap-server +#. Summary: Wizards definitions +#. Authors: Andreas Bauer +#. Ralf Haferkamp +#. +#. $Id$ +#: src/include/auth-server/mirrormode-wizard.rb:25 msgid "OpenLDAP MirrorMode Configuration" msgstr "OpenLDAP MirrorMode 구성" -#: src/include/auth-server/mirrormode-wizard.rb:28 +#: src/include/auth-server/mirrormode-wizard.rb:28 msgid "MirrorMode Node List" msgstr "MirrorMode 노드 목록" -#: src/include/auth-server/mirrormode-wizard.rb:38 +#: src/include/auth-server/mirrormode-wizard.rb:38 msgid "Server ID" msgstr "서버 IP" -#: src/include/auth-server/mirrormode-wizard.rb:38 +#: src/include/auth-server/mirrormode-wizard.rb:38 msgid "Server URI" msgstr "서버 URI" -#: src/include/auth-server/mirrormode-wizard.rb:50 -msgid "" -"This server is not setup as a MirrorMode Node. Click \"Next\" to launch the " -"standard OpenLDAP configuration wizard." -msgstr "" -"이 서버는 MirrorMode 노드로 설정되어 있지 않습니다. \"다음\"을 클릭하여 표준 " -"OpenLDAP 구성 마법사를 시작하십시오." +#: src/include/auth-server/mirrormode-wizard.rb:50 +msgid "This server is not setup as a MirrorMode Node. Click \"Next\" to launch the standard OpenLDAP configuration wizard." +msgstr "이 서버는 MirrorMode 노드로 설정되어 있지 않습니다. \"다음\"을 클릭하여 표준 OpenLDAP 구성 마법사를 시작하십시오." -#: src/include/auth-server/mirrormode-wizard.rb:85 +#: src/include/auth-server/mirrormode-wizard.rb:85 msgid "OpenLDAP MirrorMode Overview" msgstr "OpenLDAP MirrorMode 개요" -#: src/include/auth-server/mirrormode-wizard.rb:127 -msgid "" -"Deleting the host on which you started this YaST Module is not possible.\n" +#: src/include/auth-server/mirrormode-wizard.rb:127 +msgid "Deleting the host on which you started this YaST Module is not possible.\n" msgstr "이 YaST 모듈을 시작한 호스트는 삭제할 수 없습니다.\n" -#: src/include/auth-server/mirrormode-wizard.rb:130 +#: src/include/auth-server/mirrormode-wizard.rb:130 msgid "Start yast2 openldap-mirrormode on a different MirrorMode server." msgstr "다른 MirrorMode 서버에서 yast2 openldap-mirrormode를 시작하십시오." -#: src/include/auth-server/mirrormode-wizard.rb:140 +#: src/include/auth-server/mirrormode-wizard.rb:140 msgid "Do you really want to remove \"%1\" from the MirrorMode setup?\n" msgstr "MirrorMode 설정에서 \"%1\"을(를) 제거하시겠습니까?\n" -#: src/include/auth-server/mirrormode-wizard.rb:145 +#: src/include/auth-server/mirrormode-wizard.rb:145 msgid "Changes will take effect immediately after clicking \"Yes\"" msgstr "\"예\"를 클릭하면 변경 사항이 즉시 적용됩니다." -#. Initialization dialog contents -#. Initialization dialog contents -#. Initialization dialog contents -#. Initialization dialog contents -#: src/include/auth-server/mirrormode-wizard.rb:175 +#. Initialization dialog contents +#. Initialization dialog contents +#. Initialization dialog contents +#. Initialization dialog contents +#: src/include/auth-server/mirrormode-wizard.rb:175 #: src/include/auth-server/wizards.rb:53 -#: src/include/auth-server/wizards.rb:124 -#: src/include/auth-server/wizards.rb:207 -#: src/include/auth-server/wizards.rb:300 +#: src/include/auth-server/wizards.rb:124 +#: src/include/auth-server/wizards.rb:207 +#: src/include/auth-server/wizards.rb:300 msgid "Initializing..." msgstr "초기화 중..." -#. #-#-#-#-# auth-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. **************************************** -#. * tree structure definition ** -#. *************************************** -#: src/include/auth-server/tree_structure.rb:53 -#: src/modules/AuthServer.pm:2191 +#. #-#-#-#-# auth-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. **************************************** +#. * tree structure definition ** +#. *************************************** +#: src/include/auth-server/tree_structure.rb:53 src/modules/AuthServer.pm:2191 msgid "Startup Configuration" msgstr "시작 구성" -#. Tree item -#: src/include/auth-server/tree_structure.rb:62 +#. Tree item +#: src/include/auth-server/tree_structure.rb:62 msgid "Global Settings" msgstr "전역 설정" -#. Tree item -#: src/include/auth-server/tree_structure.rb:67 +#. Tree item +#: src/include/auth-server/tree_structure.rb:67 msgid "Schema Files" msgstr "스키마 파일" -#. Tree item -#: src/include/auth-server/tree_structure.rb:75 +#. Tree item +#: src/include/auth-server/tree_structure.rb:75 msgid "Log Level Settings" msgstr "로그 레벨 설정" -#. Tree item -#: src/include/auth-server/tree_structure.rb:83 +#. Tree item +#: src/include/auth-server/tree_structure.rb:83 msgid "Allow/Disallow Features" msgstr "기능 허용/허용 안 함" -#. Tree item -#: src/include/auth-server/tree_structure.rb:91 -#: src/include/auth-server/widgets.rb:218 +#. Tree item +#: src/include/auth-server/tree_structure.rb:91 +#: src/include/auth-server/widgets.rb:218 msgid "TLS Settings" msgstr "TLS 설정" -#. Tree item -#: src/include/auth-server/tree_structure.rb:100 +#. Tree item +#: src/include/auth-server/tree_structure.rb:100 msgid "Databases" msgstr "데이터베이스" -#: src/include/auth-server/tree_structure.rb:108 +#: src/include/auth-server/tree_structure.rb:108 msgid "Suffix DN" msgstr "접미사 DN" -#: src/include/auth-server/tree_structure.rb:108 -#: src/modules/LdapDatabase.rb:173 +#: src/include/auth-server/tree_structure.rb:108 +#: src/modules/LdapDatabase.rb:173 msgid "Database Type" msgstr "데이터베이스 유형" -#. widget_map["g_schema","inclist"] = l; -#: src/include/auth-server/tree_structure.rb:228 +#. widget_map["g_schema","inclist"] = l; +#: src/include/auth-server/tree_structure.rb:228 msgid "Your TLS/SSL Configuration seems to be incomplete." msgstr "TLS/SSL 구성이 불완전한 것 같습니다." -#: src/include/auth-server/tree_structure.rb:229 +#: src/include/auth-server/tree_structure.rb:229 msgid "Do you really want to enable the \"ldaps\" protocol listener?" msgstr "\"ldaps\" 프로토콜 리스너를 활성화하시겠습니까?" -#. add a new file to the list -#. file dialog heading -#: src/include/auth-server/tree_structure.rb:265 +#. add a new file to the list +#. file dialog heading +#: src/include/auth-server/tree_structure.rb:265 msgid "Select New Schema File" msgstr "새 스키마 파일 선택" -#. error popup -#: src/include/auth-server/tree_structure.rb:272 +#. error popup +#: src/include/auth-server/tree_structure.rb:272 msgid "The schema file is already in the list." msgstr "스키마 파일이 이미 목록에 있습니다." -#: src/include/auth-server/tree_structure.rb:462 +#: src/include/auth-server/tree_structure.rb:462 msgid "Select a valid Certificate File" msgstr "유효한 인증서 파일 선택" -#: src/include/auth-server/tree_structure.rb:466 +#: src/include/auth-server/tree_structure.rb:466 msgid "Select a valid Certificate Key File" msgstr "유효한 인증서 키 파일 선택" -#: src/include/auth-server/tree_structure.rb:555 +#: src/include/auth-server/tree_structure.rb:555 msgid "A common server certificate is not available." msgstr "일반 서버 인증서를 사용할 수 없습니다." -#. file selection headline -#: src/include/auth-server/tree_structure.rb:575 +#. file selection headline +#: src/include/auth-server/tree_structure.rb:575 msgid "Select Certificate File" msgstr "인증서 파일 선택" -#. file selection headline -#: src/include/auth-server/tree_structure.rb:583 +#. file selection headline +#: src/include/auth-server/tree_structure.rb:583 msgid "Select Certificate Key File" msgstr "인증서 키 파일 선택" -#. **************************************** -#. * handlers for database parent widget -#. *************************************** -#: src/include/auth-server/tree_structure.rb:717 +#. **************************************** +#. * handlers for database parent widget +#. *************************************** +#: src/include/auth-server/tree_structure.rb:717 msgid "Cannot delete Frontend database" msgstr "프런트 엔드 데이터베이스를 삭제할 수 없습니다." -#: src/include/auth-server/tree_structure.rb:719 +#: src/include/auth-server/tree_structure.rb:719 msgid "Cannot delete Config database" msgstr "구성 데이터베이스를 삭제할 수 없습니다." -#: src/include/auth-server/tree_structure.rb:721 +#: src/include/auth-server/tree_structure.rb:721 msgid "Do you really want to delete the database?" msgstr "데이터베이스를 삭제하시겠습니까?" -#. Error Popup -#. Error Popup -#: src/include/auth-server/tree_structure.rb:750 -#: src/include/auth-server/tree_structure.rb:887 +#. Error Popup +#. Error Popup +#: src/include/auth-server/tree_structure.rb:750 +#: src/include/auth-server/tree_structure.rb:887 msgid "Unable to write settings for the current database." msgstr "현재 데이터베이스에 대한 설정을 쓸 수 없습니다." -#: src/include/auth-server/tree_structure.rb:804 -#: src/include/auth-server/tree_structure.rb:944 +#: src/include/auth-server/tree_structure.rb:804 +#: src/include/auth-server/tree_structure.rb:944 msgid "Unable to read settings for the current database." msgstr "현재 데이터베이스에 대한 설정을 읽을 수 없습니다." -#: src/include/auth-server/tree_structure.rb:962 -#: src/include/auth-server/tree_structure.rb:1004 -#: src/include/auth-server/widgets.rb:404 +#: src/include/auth-server/tree_structure.rb:962 +#: src/include/auth-server/tree_structure.rb:1004 +#: src/include/auth-server/widgets.rb:404 msgid "New Administrator &Password" msgstr "새 관리자 비밀번호(&P)" -#: src/include/auth-server/tree_structure.rb:968 -#: src/include/auth-server/tree_structure.rb:1010 -#: src/include/auth-server/widgets.rb:408 +#: src/include/auth-server/tree_structure.rb:968 +#: src/include/auth-server/tree_structure.rb:1010 +#: src/include/auth-server/widgets.rb:408 msgid "Password &Encryption" msgstr "비밀번호 암호화(&E)" -#: src/include/auth-server/tree_structure.rb:1018 -#: src/include/auth-server/widgets.rb:368 +#: src/include/auth-server/tree_structure.rb:1018 +#: src/include/auth-server/widgets.rb:368 msgid "Change Administration Password" msgstr "관리 비밀번호 변경" -#: src/include/auth-server/tree_structure.rb:1041 -#: src/include/auth-server/tree_structure.rb:1042 -#: src/include/auth-server/tree_structure.rb:1043 -#: src/include/auth-server/tree_structure.rb:1044 -#: src/modules/AuthServer.pm:2193 src/modules/AuthServer.pm:2212 -#: src/modules/AuthServer.pm:2213 src/modules/AuthServer.pm:2214 +#: src/include/auth-server/tree_structure.rb:1041 +#: src/include/auth-server/tree_structure.rb:1042 +#: src/include/auth-server/tree_structure.rb:1043 +#: src/include/auth-server/tree_structure.rb:1044 +#: src/modules/AuthServer.pm:2193 src/modules/AuthServer.pm:2212 +#: src/modules/AuthServer.pm:2213 src/modules/AuthServer.pm:2214 msgid "No" msgstr "아니오" -#: src/include/auth-server/tree_structure.rb:1046 -#: src/include/auth-server/tree_structure.rb:1047 -#: src/include/auth-server/tree_structure.rb:1048 -#: src/modules/AuthServer.pm:2193 src/modules/AuthServer.pm:2212 -#: src/modules/AuthServer.pm:2213 src/modules/AuthServer.pm:2214 +#: src/include/auth-server/tree_structure.rb:1046 +#: src/include/auth-server/tree_structure.rb:1047 +#: src/include/auth-server/tree_structure.rb:1048 +#: src/modules/AuthServer.pm:2193 src/modules/AuthServer.pm:2212 +#: src/modules/AuthServer.pm:2213 src/modules/AuthServer.pm:2214 msgid "Yes" msgstr "예" -#. skip attribute that already have an index defined -#: src/include/auth-server/tree_structure.rb:1191 +#. skip attribute that already have an index defined +#: src/include/auth-server/tree_structure.rb:1191 msgid "Multiple Replication Consumers not supported currently" msgstr "현재 다중 복제 소비자가 지원되지 않습니다." -#. **************************************** -#. tree generation functions ** -#. *************************************** -#: src/include/auth-server/tree_structure.rb:1293 +#. **************************************** +#. tree generation functions ** +#. *************************************** +#: src/include/auth-server/tree_structure.rb:1293 msgid "Index Configuration" msgstr "색인 구성" -#: src/include/auth-server/tree_structure.rb:1301 +#: src/include/auth-server/tree_structure.rb:1301 msgid "Password Policy Configuration" msgstr "암호 정책 구성" -#: src/include/auth-server/tree_structure.rb:1310 +#: src/include/auth-server/tree_structure.rb:1310 msgid "Access Control Configuration" msgstr "액세스 제어 구성" -#: src/include/auth-server/tree_structure.rb:1319 +#: src/include/auth-server/tree_structure.rb:1319 msgid "Replication Provider" msgstr "복제 공급자" -#: src/include/auth-server/tree_structure.rb:1328 +#: src/include/auth-server/tree_structure.rb:1328 msgid "Replication Consumer" msgstr "복제 소비자" -#: src/include/auth-server/widgets.rb:70 +#: src/include/auth-server/widgets.rb:70 msgid "&Start Kerberos Server" msgstr "Kerberos 서버 시작(&S)" -#: src/include/auth-server/widgets.rb:94 +#: src/include/auth-server/widgets.rb:94 msgid "Protocol Listeners" msgstr "프로토콜 리스너" -#: src/include/auth-server/widgets.rb:100 +#: src/include/auth-server/widgets.rb:100 msgid "LDAP" msgstr "LDAP" -#. `HWeight(1, `PushButton( `id( `pb_interface_ldap), "Interfaces ...")), -#: src/include/auth-server/widgets.rb:112 +#. `HWeight(1, `PushButton( `id( `pb_interface_ldap), "Interfaces ...")), +#: src/include/auth-server/widgets.rb:112 msgid "LDAP over SSL (ldaps)" msgstr "SSL 상의 LDAP(ldaps)" -#: src/include/auth-server/widgets.rb:141 +#: src/include/auth-server/widgets.rb:141 msgid "Included &Schema Files" msgstr "포함된 스키마 파일(&S)" -#: src/include/auth-server/widgets.rb:152 +#: src/include/auth-server/widgets.rb:152 msgid "Select &Log Level Flags:" msgstr "로그 레벨 플래그 선택(&L):" -#: src/include/auth-server/widgets.rb:154 +#: src/include/auth-server/widgets.rb:154 msgid "Trace Function Calls" msgstr "추적 함수 호출" -#: src/include/auth-server/widgets.rb:155 +#: src/include/auth-server/widgets.rb:155 msgid "Debug Packet Handling" msgstr "디버그 패킷 처리" -#: src/include/auth-server/widgets.rb:156 +#: src/include/auth-server/widgets.rb:156 msgid "Heavy Trace Debugging (function args)" msgstr "대량 추적 디버깅(기능 인수)" -#: src/include/auth-server/widgets.rb:157 +#: src/include/auth-server/widgets.rb:157 msgid "Connection Management" msgstr "연결 관리" -#: src/include/auth-server/widgets.rb:158 +#: src/include/auth-server/widgets.rb:158 msgid "Print Packets Sent and Received" msgstr "송수신된 인쇄 패킷" -#: src/include/auth-server/widgets.rb:159 +#: src/include/auth-server/widgets.rb:159 msgid "Search Filter Processing" msgstr "검색 필터 프로세싱" -#: src/include/auth-server/widgets.rb:160 +#: src/include/auth-server/widgets.rb:160 msgid "Configuration File Processing" msgstr "구성 파일 프로세싱" -#: src/include/auth-server/widgets.rb:161 +#: src/include/auth-server/widgets.rb:161 msgid "Access Control List Processing" msgstr "액세스 제어 목록 프로세싱" -#: src/include/auth-server/widgets.rb:162 +#: src/include/auth-server/widgets.rb:162 msgid "Log Connections, Operations, and Result" msgstr "로그 연결, 작동 및 결과" -#: src/include/auth-server/widgets.rb:163 +#: src/include/auth-server/widgets.rb:163 msgid "Log Entries Sent" msgstr "전송된 로그 엔트리" -#: src/include/auth-server/widgets.rb:164 +#: src/include/auth-server/widgets.rb:164 msgid "Print Communication with Shell Back-Ends" msgstr "쉘 백엔드와의 인쇄 통신" -#: src/include/auth-server/widgets.rb:165 +#: src/include/auth-server/widgets.rb:165 msgid "Entry Parsing" msgstr "엔트리 구문 분석" -#: src/include/auth-server/widgets.rb:166 +#: src/include/auth-server/widgets.rb:166 msgid "LDAPSync Replication" msgstr "LDAPSync 복제" -#: src/include/auth-server/widgets.rb:167 +#: src/include/auth-server/widgets.rb:167 msgid "None" msgstr "없음" -#: src/include/auth-server/widgets.rb:174 +#: src/include/auth-server/widgets.rb:174 msgid "Select &Allow Flags:" msgstr "허용 플래그 선택(&A):" -#: src/include/auth-server/widgets.rb:176 +#: src/include/auth-server/widgets.rb:176 msgid "LDAPv2 Bind Requests" msgstr "LDAPv2 바인드 요청" -#: src/include/auth-server/widgets.rb:179 +#: src/include/auth-server/widgets.rb:179 msgid "Anonymous Bind when Credentials Not Empty" msgstr "자격 증명이 비어 있지 않을 때 익명 바인드" -#: src/include/auth-server/widgets.rb:183 +#: src/include/auth-server/widgets.rb:183 msgid "Unauthenticated Bind when DN Not Empty" msgstr "DN이 비어 있지 않을 때 인증되지 않은 바인드" -#: src/include/auth-server/widgets.rb:187 +#: src/include/auth-server/widgets.rb:187 msgid "Unauthenticated Update Operations to Process" msgstr "처리할 인증되지 않은 업데이트 작업" -#: src/include/auth-server/widgets.rb:193 +#: src/include/auth-server/widgets.rb:193 msgid "Select &Disallow Flags:" msgstr "허용 안 함 플래그 선택(&D):" -#: src/include/auth-server/widgets.rb:197 -msgid "" -"Disable acceptance of anonymous Bind Requests (does not prohibit anonymous " -"directory access)" +#: src/include/auth-server/widgets.rb:197 +msgid "Disable acceptance of anonymous Bind Requests (does not prohibit anonymous directory access)" msgstr "익명 바인드 요청의 수락 허용 안 함(익명 디렉토리 액세스 허용)" -#: src/include/auth-server/widgets.rb:201 +#: src/include/auth-server/widgets.rb:201 msgid "Disable Simple Bind authentication" msgstr "단순 바인드 인증 비활성화" -#: src/include/auth-server/widgets.rb:204 -msgid "" -"Disable forcing session to anonymous status upon StartTLS operation receipt" +#: src/include/auth-server/widgets.rb:204 +msgid "Disable forcing session to anonymous status upon StartTLS operation receipt" msgstr "StartTLS 작업 수신 시 세션을 익명 상태로 강제 비활성화" -#: src/include/auth-server/widgets.rb:210 +#: src/include/auth-server/widgets.rb:210 msgid "Disallow the StartTLS operation if authenticated" msgstr "StartTLS 작업이 인증된 경우 허용 안 함" -#: src/include/auth-server/widgets.rb:221 +#: src/include/auth-server/widgets.rb:221 msgid "Basic Settings" msgstr "기본 설정" -#: src/include/auth-server/widgets.rb:227 +#: src/include/auth-server/widgets.rb:227 msgid "Enable TLS" msgstr "TLS 활성화" -#: src/include/auth-server/widgets.rb:234 +#: src/include/auth-server/widgets.rb:234 msgid "Enable LDAP over SSL (ldaps) interface" msgstr "SSL 상의 LDAP(ldaps) 인터페이스 활성화" -#: src/include/auth-server/widgets.rb:242 +#: src/include/auth-server/widgets.rb:242 msgid "Use common Server Certificate" msgstr "일반 서버 인증서 사용" -#: src/include/auth-server/widgets.rb:254 +#: src/include/auth-server/widgets.rb:254 msgid "Import Certificate" msgstr "인증서 임포트" -#: src/include/auth-server/widgets.rb:273 +#: src/include/auth-server/widgets.rb:273 msgid "Certificate &File (PEM Format)" msgstr "인증서 파일(PEM 형식)(&F)" -#: src/include/auth-server/widgets.rb:276 src/modules/LdapDatabase.rb:234 +#: src/include/auth-server/widgets.rb:276 src/modules/LdapDatabase.rb:234 msgid "&Browse..." msgstr "찾아보기(&B)..." -#: src/include/auth-server/widgets.rb:285 +#: src/include/auth-server/widgets.rb:285 msgid "Certificate &Key File (PEM Format - Unencrypted)" msgstr "인증서 키 파일(PEM 형식 - 암호화되지 않음)(&K)" -#: src/include/auth-server/widgets.rb:288 +#: src/include/auth-server/widgets.rb:288 msgid "B&rowse..." msgstr "찾아보기(&R)..." -#: src/include/auth-server/widgets.rb:295 +#: src/include/auth-server/widgets.rb:295 msgid "Launch CA Management Module" msgstr "CA 관리 모듈 시작" -#: src/include/auth-server/widgets.rb:301 src/modules/LdapDatabase.rb:178 +#: src/include/auth-server/widgets.rb:301 src/modules/LdapDatabase.rb:178 msgid "&Base DN" msgstr "베이스 DN(&B)" -#: src/include/auth-server/widgets.rb:305 +#: src/include/auth-server/widgets.rb:305 msgid "Administrator DN" msgstr "관리자 DN" -#: src/include/auth-server/widgets.rb:307 src/modules/LdapDatabase.rb:81 +#: src/include/auth-server/widgets.rb:307 src/modules/LdapDatabase.rb:81 msgid "&Append Base DN" msgstr "베이스 DN 추가(&P)" -#: src/include/auth-server/widgets.rb:309 +#: src/include/auth-server/widgets.rb:309 msgid "Change Password" msgstr "비밀번호 변경" -#: src/include/auth-server/widgets.rb:317 +#: src/include/auth-server/widgets.rb:317 msgid "Edit BDB Database" msgstr "BDB 데이터베이스 편집" -#: src/include/auth-server/widgets.rb:324 +#: src/include/auth-server/widgets.rb:324 msgid "Entry Cache" msgstr "항목 캐시" -#: src/include/auth-server/widgets.rb:330 +#: src/include/auth-server/widgets.rb:330 msgid "Index Cache (IDL cache)" msgstr "색인 캐시(IDL 캐시)" -#: src/include/auth-server/widgets.rb:341 src/modules/LdapDatabase.rb:2096 +#: src/include/auth-server/widgets.rb:341 src/modules/LdapDatabase.rb:2096 msgid "Checkpoint Settings" msgstr "검사점 설정" -#: src/include/auth-server/widgets.rb:344 +#: src/include/auth-server/widgets.rb:344 msgid "kilobytes" msgstr "KB" -#: src/include/auth-server/widgets.rb:346 +#: src/include/auth-server/widgets.rb:346 msgid "minutes" msgstr "분" -#: src/include/auth-server/widgets.rb:354 +#: src/include/auth-server/widgets.rb:354 msgid "Change Configuration Database Settings" msgstr "구성 데이터베이스 설정 변경" -#: src/include/auth-server/widgets.rb:359 +#: src/include/auth-server/widgets.rb:359 msgid "Allow Plaintext Authentication (Simple Bind) for this Database. " msgstr "이 데이터베이스에 대한 일반 텍스트 인증(단순 바인드)을 허용합니다." -#: src/include/auth-server/widgets.rb:362 +#: src/include/auth-server/widgets.rb:362 msgid "(Remote Connection needs to be encrypted)" msgstr "(원격 연결을 암호화해야 함)" -#: src/include/auth-server/widgets.rb:374 +#: src/include/auth-server/widgets.rb:374 msgid "Edit Database" msgstr "데이터베이스 편집" -#: src/include/auth-server/widgets.rb:376 +#: src/include/auth-server/widgets.rb:376 msgid "Database type not currently supported." msgstr "데이터베이스 유형이 현재 지원되지 않습니다." -#: src/include/auth-server/widgets.rb:381 +#: src/include/auth-server/widgets.rb:381 msgid "Indexing Configuration" msgstr "색인화 구성" -#: src/include/auth-server/widgets.rb:384 +#: src/include/auth-server/widgets.rb:384 msgid "Attribute" msgstr "속성" -#: src/include/auth-server/widgets.rb:384 -#: src/include/auth-server/widgets.rb:457 +#: src/include/auth-server/widgets.rb:384 +#: src/include/auth-server/widgets.rb:457 msgid "Presence" msgstr "자리에 있음" -#: src/include/auth-server/widgets.rb:384 -#: src/include/auth-server/widgets.rb:458 +#: src/include/auth-server/widgets.rb:384 +#: src/include/auth-server/widgets.rb:458 msgid "Equality" msgstr "동등" -#: src/include/auth-server/widgets.rb:384 -#: src/include/auth-server/widgets.rb:459 +#: src/include/auth-server/widgets.rb:384 +#: src/include/auth-server/widgets.rb:459 msgid "Substring" msgstr "하위 문자열" -#: src/include/auth-server/widgets.rb:403 +#: src/include/auth-server/widgets.rb:403 msgid "Change Administrator Password" msgstr "관리자 비밀번호 변경" -#: src/include/auth-server/widgets.rb:410 +#: src/include/auth-server/widgets.rb:410 msgid "Update Kerberos Stash" msgstr "Kerberos Stash 업데이트" -#: src/include/auth-server/widgets.rb:452 +#: src/include/auth-server/widgets.rb:452 msgid "Add Index" msgstr "색인 추가" -#. encoding: utf-8 -#: src/modules/LdapDatabase.rb:40 src/modules/LdapDatabase.rb:2233 +#. encoding: utf-8 +#: src/modules/LdapDatabase.rb:40 src/modules/LdapDatabase.rb:2233 msgid "Password Policy Settings" msgstr "암호 정책 설정" -#: src/modules/LdapDatabase.rb:47 +#: src/modules/LdapDatabase.rb:47 msgid "Enable Password Policies" msgstr "암호 정책 활성화" -#: src/modules/LdapDatabase.rb:55 +#: src/modules/LdapDatabase.rb:55 msgid "Hash Clear Text Passwords" msgstr "일반 텍스트 암호 해싱" -#: src/modules/LdapDatabase.rb:63 +#: src/modules/LdapDatabase.rb:63 msgid "Disclose \"Account Locked\" Status" msgstr "\"잠긴 계정\" 상태 공개" -#: src/modules/LdapDatabase.rb:73 +#: src/modules/LdapDatabase.rb:73 msgid "Default Policy Object DN" msgstr "기본 정책 개체 DN" -#: src/modules/LdapDatabase.rb:89 +#: src/modules/LdapDatabase.rb:89 msgid "Edit Policy" msgstr "정책 편집" -#: src/modules/LdapDatabase.rb:100 +#: src/modules/LdapDatabase.rb:100 msgid "All Entries" msgstr "모든 항목" -#: src/modules/LdapDatabase.rb:101 +#: src/modules/LdapDatabase.rb:101 msgid "All Entries in the Subtree" msgstr "하위 트리의 모든 항목" -#: src/modules/LdapDatabase.rb:102 +#: src/modules/LdapDatabase.rb:102 msgid "The Entry with the DN" msgstr "DN을 포함한 항목" -#: src/modules/LdapDatabase.rb:106 +#: src/modules/LdapDatabase.rb:106 msgid "Everybody" msgstr "모든 사용자" -#: src/modules/LdapDatabase.rb:107 +#: src/modules/LdapDatabase.rb:107 msgid "Authenticated Clients" msgstr "인증된 클라이언트 " -#: src/modules/LdapDatabase.rb:108 +#: src/modules/LdapDatabase.rb:108 msgid "Anonymous Clients" msgstr "익명 클라이언트" -#: src/modules/LdapDatabase.rb:109 +#: src/modules/LdapDatabase.rb:109 msgid "The accessed Entry (self)" msgstr "액세스한 항목(직접)" -#: src/modules/LdapDatabase.rb:110 +#: src/modules/LdapDatabase.rb:110 msgid "The user with the DN" msgstr "DN을 포함한 사용자" -#: src/modules/LdapDatabase.rb:111 +#: src/modules/LdapDatabase.rb:111 msgid "All entries in the subtree" msgstr "하위 트리의 모든 항목" -#: src/modules/LdapDatabase.rb:112 +#: src/modules/LdapDatabase.rb:112 msgid "All members of the group" msgstr "그룹의 모든 구성원" -#: src/modules/LdapDatabase.rb:125 +#: src/modules/LdapDatabase.rb:125 msgid "<empty>" msgstr "<비어 있음>" -#: src/modules/LdapDatabase.rb:126 +#: src/modules/LdapDatabase.rb:126 msgid "No Access" msgstr "액세스 안 함" -#: src/modules/LdapDatabase.rb:128 +#: src/modules/LdapDatabase.rb:128 msgid "No Access (but disclose information on error)" msgstr "액세스 안 함(그러나 오류 발생 시 정보 제공)" -#: src/modules/LdapDatabase.rb:131 +#: src/modules/LdapDatabase.rb:131 msgid "Authenticate" msgstr "인증" -#: src/modules/LdapDatabase.rb:132 +#: src/modules/LdapDatabase.rb:132 msgid "Compare" msgstr "비교" -#: src/modules/LdapDatabase.rb:133 +#: src/modules/LdapDatabase.rb:133 msgid "Read" msgstr "읽기" -#: src/modules/LdapDatabase.rb:134 +#: src/modules/LdapDatabase.rb:134 msgid "Write" msgstr "쓰기" -#: src/modules/LdapDatabase.rb:135 +#: src/modules/LdapDatabase.rb:135 msgid "Manage (full access)" msgstr "관리(전체 액세스)" -#. don't count frontend and Config DB -#: src/modules/LdapDatabase.rb:167 +#. don't count frontend and Config DB +#: src/modules/LdapDatabase.rb:167 msgid "New Database" msgstr "새 데이터베이스" -#: src/modules/LdapDatabase.rb:170 +#: src/modules/LdapDatabase.rb:170 msgid "Basic Database Settings" msgstr "기본 데이터베이스 설정" -#: src/modules/LdapDatabase.rb:189 +#: src/modules/LdapDatabase.rb:189 msgid "&Administrator DN" msgstr "관리자 DN(&A)" -#: src/modules/LdapDatabase.rb:197 +#: src/modules/LdapDatabase.rb:197 msgid "A&ppend Base DN" msgstr "베이스 DN 추가(&P)" -#: src/modules/LdapDatabase.rb:211 +#: src/modules/LdapDatabase.rb:211 msgid "LDAP Administrator &Password" msgstr "LDAP 관리자 비밀번호(&P)" -#: src/modules/LdapDatabase.rb:230 +#: src/modules/LdapDatabase.rb:230 msgid "&Database Directory" msgstr "데이터베이스 디렉토리(&D)" -#: src/modules/LdapDatabase.rb:240 +#: src/modules/LdapDatabase.rb:240 msgid "Use this database as the default for OpenLDAP clients" msgstr "이 데이터베이스를 OpenLDAP 클라이언트에 대한 기본값으로 사용" -#: src/modules/LdapDatabase.rb:311 +#: src/modules/LdapDatabase.rb:311 msgid "Select Database Directory" msgstr "데이터베이스 디렉토리 선택" -#. check values -#: src/modules/LdapDatabase.rb:350 +#. check values +#: src/modules/LdapDatabase.rb:350 msgid "Base DN must be set." msgstr "베이스 DN을 설정해야 합니다." -#: src/modules/LdapDatabase.rb:359 +#: src/modules/LdapDatabase.rb:359 msgid "A database with this Base DN already exists." msgstr "이 기본 DN을 가진 데이터베이스가 이미 있습니다." -#: src/modules/LdapDatabase.rb:399 +#: src/modules/LdapDatabase.rb:399 msgid "Root DN must be set if a password is given." msgstr "비밀번호가 지정되면 루트 DN을 설정해야 합니다." -#: src/modules/LdapDatabase.rb:405 +#: src/modules/LdapDatabase.rb:405 msgid "Password validation failed." msgstr "비밀번호 확인에 실패했습니다." -#: src/modules/LdapDatabase.rb:435 +#: src/modules/LdapDatabase.rb:435 msgid "" "The Base Object: \"%1\" cannot be auto created by YaST:\n" "%2" @@ -2967,156 +2654,156 @@ "기본 객체 \"%1\"은(는) YaST에 의해 자동으로 생성할 수 없습니다.\n" "%2" -#: src/modules/LdapDatabase.rb:451 +#: src/modules/LdapDatabase.rb:451 msgid "A directory must be specified." msgstr "디렉토리를 지정해야 합니다." -#: src/modules/LdapDatabase.rb:458 +#: src/modules/LdapDatabase.rb:458 msgid "The directory does not exist. Create it?" msgstr "" "디렉토리는 존재하지 않습니다.\n" "디렉토리를 만드시겠습니까?" -#. try to read the ppolicy from the server -#: src/modules/LdapDatabase.rb:631 +#. try to read the ppolicy from the server +#: src/modules/LdapDatabase.rb:631 msgid "Authentication failed. The password is probably incorrect.\n" msgstr "인증에 실패했습니다. 비밀번호가 틀렸을 수 있습니다.\n" -#: src/modules/LdapDatabase.rb:634 +#: src/modules/LdapDatabase.rb:634 msgid "The error message was: '" msgstr "오류 메시지: '" -#: src/modules/LdapDatabase.rb:639 +#: src/modules/LdapDatabase.rb:639 msgid "Try again?" msgstr "다시 해보시겠습니까?" -#. PasswordPolicyDialog only returns the changes made to the original -#. Entry, try to merge them here -#: src/modules/LdapDatabase.rb:714 +#. PasswordPolicyDialog only returns the changes made to the original +#. Entry, try to merge them here +#: src/modules/LdapDatabase.rb:714 msgid "Available Attribute Types" msgstr "사용 가능한 특성 유형" -#: src/modules/LdapDatabase.rb:718 +#: src/modules/LdapDatabase.rb:718 msgid "Selected Attribute Types" msgstr "선택한 특성 유형" -#. Popup to add/edit the acl "by" clauses -#: src/modules/LdapDatabase.rb:807 src/modules/LdapDatabase.rb:979 +#. Popup to add/edit the acl "by" clauses +#: src/modules/LdapDatabase.rb:807 src/modules/LdapDatabase.rb:979 msgid "Who should this rule apply to" msgstr "이 규칙을 적용할 사용자" -#: src/modules/LdapDatabase.rb:813 src/modules/LdapDatabase.rb:940 -#: src/modules/LdapDatabase.rb:983 src/modules/LdapDatabase.rb:1221 +#: src/modules/LdapDatabase.rb:813 src/modules/LdapDatabase.rb:940 +#: src/modules/LdapDatabase.rb:983 src/modules/LdapDatabase.rb:1221 msgid "Entry DN" msgstr "항목 DN" -#: src/modules/LdapDatabase.rb:814 src/modules/LdapDatabase.rb:984 +#: src/modules/LdapDatabase.rb:814 src/modules/LdapDatabase.rb:984 msgid "Select" msgstr "선택" -#: src/modules/LdapDatabase.rb:820 +#: src/modules/LdapDatabase.rb:820 msgid "Define the Access Level" msgstr "액세스 수준 정의" -#: src/modules/LdapDatabase.rb:830 +#: src/modules/LdapDatabase.rb:830 msgid "Stop access control evaluation here (default)" msgstr "여기서 액세스 제어 평가 중지(기본값)" -#: src/modules/LdapDatabase.rb:837 +#: src/modules/LdapDatabase.rb:837 msgid "Continue with next access control rule (\"break\")" msgstr "다음 액세스 제어 규칙 계속(\"중단\")" -#: src/modules/LdapDatabase.rb:843 +#: src/modules/LdapDatabase.rb:843 msgid "Continue evaluation of this rule (\"continue\")" msgstr "이 규칙 평가 계속(\"계속\")" -#: src/modules/LdapDatabase.rb:898 +#: src/modules/LdapDatabase.rb:898 msgid "Please enter a DN in the textfield" msgstr "텍스트 필드에 DN을 입력하십시오." -#: src/modules/LdapDatabase.rb:942 src/modules/LdapDatabase.rb:1084 -#: src/modules/LdapDatabase.rb:1219 +#: src/modules/LdapDatabase.rb:942 src/modules/LdapDatabase.rb:1084 +#: src/modules/LdapDatabase.rb:1219 msgid "Subtree DN" msgstr "하위 트리 DN" -#: src/modules/LdapDatabase.rb:944 +#: src/modules/LdapDatabase.rb:944 msgid "Group DN" msgstr "그룹 DN" -#: src/modules/LdapDatabase.rb:967 +#: src/modules/LdapDatabase.rb:967 msgid "Edit Access Control Rule" msgstr "액세스 제어 규칙 편집" -#: src/modules/LdapDatabase.rb:972 +#: src/modules/LdapDatabase.rb:972 msgid "Target Objects" msgstr "대상 객체" -#: src/modules/LdapDatabase.rb:993 +#: src/modules/LdapDatabase.rb:993 msgid "Matching the filter:" msgstr "필터와 일치:" -#: src/modules/LdapDatabase.rb:1000 +#: src/modules/LdapDatabase.rb:1000 msgid "LDAP Filter" msgstr "LDAP 필터" -#: src/modules/LdapDatabase.rb:1010 +#: src/modules/LdapDatabase.rb:1010 msgid "Apply this rule only to the listed attribute" msgstr "나열된 특성에만 이 규칙 적용" -#: src/modules/LdapDatabase.rb:1015 src/modules/LdapDatabase.rb:1309 +#: src/modules/LdapDatabase.rb:1015 src/modules/LdapDatabase.rb:1309 msgid "Attributes" msgstr "특성" -#: src/modules/LdapDatabase.rb:1017 +#: src/modules/LdapDatabase.rb:1017 msgid "Edit" msgstr "편집" -#: src/modules/LdapDatabase.rb:1023 src/modules/LdapDatabase.rb:1035 +#: src/modules/LdapDatabase.rb:1023 src/modules/LdapDatabase.rb:1035 msgid "Access Level" msgstr "액세스 수준" -#: src/modules/LdapDatabase.rb:1033 +#: src/modules/LdapDatabase.rb:1033 msgid "Who" msgstr "사용자" -#: src/modules/LdapDatabase.rb:1034 src/modules/LdapDatabase.rb:1309 +#: src/modules/LdapDatabase.rb:1034 src/modules/LdapDatabase.rb:1309 msgid "DN" msgstr "DN" -#: src/modules/LdapDatabase.rb:1036 +#: src/modules/LdapDatabase.rb:1036 msgid "Flow Control" msgstr "흐름 제어" -#: src/modules/LdapDatabase.rb:1041 src/modules/LdapDatabase.rb:1313 +#: src/modules/LdapDatabase.rb:1041 src/modules/LdapDatabase.rb:1313 msgid "Up" msgstr "위" -#: src/modules/LdapDatabase.rb:1042 src/modules/LdapDatabase.rb:1314 +#: src/modules/LdapDatabase.rb:1042 src/modules/LdapDatabase.rb:1314 msgid "Down" msgstr "아래" -#. FIXME: Validate attribute types -#: src/modules/LdapDatabase.rb:1179 +#. FIXME: Validate attribute types +#: src/modules/LdapDatabase.rb:1179 msgid "Enter a list of valid attributes in the <b>Attributes</b> textfield" msgstr "<b>특성</b> 텍스트 필드에 유효한 특성 목록을 입력하십시오." -#: src/modules/LdapDatabase.rb:1191 +#: src/modules/LdapDatabase.rb:1191 msgid "Enter valid a LDAP filter in the textfield" msgstr "텍스트 필드에 유효한 LDAP 필터를 입력하십시오." -#: src/modules/LdapDatabase.rb:1197 +#: src/modules/LdapDatabase.rb:1197 msgid "You must add at least one item to the \"Access Level\" list." msgstr "\"액세스 수준\" 목록에 항목을 하나 이상 추가해야 합니다." -#: src/modules/LdapDatabase.rb:1309 +#: src/modules/LdapDatabase.rb:1309 msgid "Target" msgstr "대상" -#: src/modules/LdapDatabase.rb:1309 +#: src/modules/LdapDatabase.rb:1309 msgid "Filter" msgstr "필터" -#: src/modules/LdapDatabase.rb:1341 +#: src/modules/LdapDatabase.rb:1341 msgid "" "The selected database contains access control rules that are currently\n" "not supported by YaST. The Access Control Dialog will be disabled.\n" @@ -3124,110 +2811,109 @@ "선택한 데이터베이스에 현재 YaST에서 지원되지 않는 액세스 제어 규칙이\n" "포함되어 있습니다. [액세스 제어] 대화 상자가 비활성화됩니다.\n" -#: src/modules/LdapDatabase.rb:1588 +#: src/modules/LdapDatabase.rb:1588 msgid "This database is a Replication Consumer." msgstr "이 데이터베이스는 복제 소비자입니다." -#: src/modules/LdapDatabase.rb:1608 +#: src/modules/LdapDatabase.rb:1608 msgid "Provider Name" msgstr "공급자 이름" -#: src/modules/LdapDatabase.rb:1631 +#: src/modules/LdapDatabase.rb:1631 msgid "Replication Type" msgstr "복제 유형" -#: src/modules/LdapDatabase.rb:1638 +#: src/modules/LdapDatabase.rb:1638 msgid "Replication Interval" msgstr "복제 간격" -#: src/modules/LdapDatabase.rb:1641 +#: src/modules/LdapDatabase.rb:1641 msgid "Days" msgstr "일" -#: src/modules/LdapDatabase.rb:1645 +#: src/modules/LdapDatabase.rb:1645 msgid "Hours" msgstr "시간" -#: src/modules/LdapDatabase.rb:1649 src/modules/LdapDatabase.rb:2112 +#: src/modules/LdapDatabase.rb:1649 src/modules/LdapDatabase.rb:2112 msgid "Minutes" msgstr "분" -#: src/modules/LdapDatabase.rb:1653 +#: src/modules/LdapDatabase.rb:1653 msgid "Seconds" msgstr "초" -#: src/modules/LdapDatabase.rb:1666 +#: src/modules/LdapDatabase.rb:1666 msgid "Authentication DN" msgstr "인증 DN" -#: src/modules/LdapDatabase.rb:1687 +#: src/modules/LdapDatabase.rb:1687 msgid "Custom update referral" msgstr "사용자 정의 업데이트 조회" -#: src/modules/LdapDatabase.rb:1703 +#: src/modules/LdapDatabase.rb:1703 msgid "Target Host" msgstr "대상 호스트" -#. no updateref -#: src/modules/LdapDatabase.rb:1923 +#. no updateref +#: src/modules/LdapDatabase.rb:1923 msgid "Invalid replication interval specified" msgstr "잘못된 복제 간격이 지정되었습니다." -#. test connection -#: src/modules/LdapDatabase.rb:1959 +#. test connection +#: src/modules/LdapDatabase.rb:1959 msgid "Checking LDAP connectivity to the provider failed." msgstr "공급자에 대한 LDAP 연결 확인에 실패했습니다." -#: src/modules/LdapDatabase.rb:1974 src/modules/LdapDatabase.rb:2001 +#: src/modules/LdapDatabase.rb:1974 src/modules/LdapDatabase.rb:2001 msgid "Do you still want to continue?" msgstr "계속하시겠습니까?" -#: src/modules/LdapDatabase.rb:1983 +#: src/modules/LdapDatabase.rb:1983 msgid "Checking the LDAPsync capabilities of the provider failed." msgstr "공급자의 LDAPsync 기능 확인에 실패했습니다." -#: src/modules/LdapDatabase.rb:1989 -msgid "" -"Please verify that the target server is enabled to be a LDAPsync provider" +#: src/modules/LdapDatabase.rb:1989 +msgid "Please verify that the target server is enabled to be a LDAPsync provider" msgstr "대상 서버가 LDAPsync 공급자가 되도록 활성화되는지 확인하십시오." -#: src/modules/LdapDatabase.rb:2088 +#: src/modules/LdapDatabase.rb:2088 msgid "Enable ldapsync provider for this database" msgstr "이 데이터베이스에 대한 LDAPsync 공급자 활성화" -#: src/modules/LdapDatabase.rb:2102 src/modules/LdapDatabase.rb:2138 +#: src/modules/LdapDatabase.rb:2102 src/modules/LdapDatabase.rb:2138 msgid "Operations" msgstr "작업" -#: src/modules/LdapDatabase.rb:2125 +#: src/modules/LdapDatabase.rb:2125 msgid "Session Log" msgstr "세션 로그" -#: src/modules/LdapDatabase.rb:2131 +#: src/modules/LdapDatabase.rb:2131 msgid "Enable Session Log" msgstr "세션 로그 활성화" -#: src/modules/LdapDatabase.rb:2265 +#: src/modules/LdapDatabase.rb:2265 msgid "Replication Settings" msgstr "복제 설정" -#: src/modules/AuthServer.pm:352 +#: src/modules/AuthServer.pm:352 msgid "Reading Startup Configuration" msgstr "시작 구성을 읽는 중" -#: src/modules/AuthServer.pm:353 +#: src/modules/AuthServer.pm:353 msgid "Reading Configuration Backend" msgstr "구성 백엔드를 읽는 중" -#: src/modules/AuthServer.pm:354 +#: src/modules/AuthServer.pm:354 msgid "Reading Configuration Data" msgstr "구성 데이터를 읽는 중" -#: src/modules/AuthServer.pm:355 +#: src/modules/AuthServer.pm:355 msgid "Initializing Authentication Server Configuration" msgstr "인증 서버 구성 초기화" -#: src/modules/AuthServer.pm:390 +#: src/modules/AuthServer.pm:390 msgid "" "Error while initializing configuration.\n" "Is the LDAPI listener enabled?\n" @@ -3235,403 +2921,385 @@ "구성을 초기화하는 중 오류가 발생했습니다.\n" "LDAPI 리스너가 활성화되었습니까?\n" -#: src/modules/AuthServer.pm:466 src/modules/AuthServer.pm:1033 +#: src/modules/AuthServer.pm:466 src/modules/AuthServer.pm:1033 msgid "LDAP search failed." msgstr "LDAP 검색에 실패했습니다." -#: src/modules/AuthServer.pm:812 +#: src/modules/AuthServer.pm:812 msgid "Invalid LDAP URI scheme." msgstr "LDAP URI 스키마가 잘못되었습니다." -#: src/modules/AuthServer.pm:828 +#: src/modules/AuthServer.pm:828 msgid "LDAP initialization failed." msgstr "LDAP 초기화에 실패했습니다." -#: src/modules/AuthServer.pm:854 +#: src/modules/AuthServer.pm:854 msgid "LDAP bind failed." msgstr "LDAP 바인드에 실패했습니다." -#: src/modules/AuthServer.pm:877 +#: src/modules/AuthServer.pm:877 msgid "Initializing LDAP schema failed." msgstr "LDAP 스키마를 초기화하지 못했습니다." -#: src/modules/AuthServer.pm:888 +#: src/modules/AuthServer.pm:888 msgid "Reading LDAP schema failed." msgstr "LDAP 스키마를 읽지 못했습니다." -#: src/modules/AuthServer.pm:898 +#: src/modules/AuthServer.pm:898 msgid "Kerberos Schema unknown by the LDAP server." msgstr "LDAP 서버에서 알 수 없는 Kerberos 스키마입니다." -#: src/modules/AuthServer.pm:975 src/modules/AuthServer.pm:3482 -#: src/modules/AuthServer.pm:3536 src/modules/AuthServer.pm:3581 +#: src/modules/AuthServer.pm:975 src/modules/AuthServer.pm:3482 +#: src/modules/AuthServer.pm:3536 src/modules/AuthServer.pm:3581 msgid "Cannot execute kdb5_ldap_util." msgstr "kdb5_ldap_util을 실행할 수 없습니다." -#: src/modules/AuthServer.pm:1005 +#: src/modules/AuthServer.pm:1005 msgid "Modifying the kerberos database failed." msgstr "kerberos 데이터베이스를 수정하지 못했습니다." -#: src/modules/AuthServer.pm:1046 +#: src/modules/AuthServer.pm:1046 msgid "LDAP modify failed." msgstr "LDAP 수정에 실패했습니다." -#: src/modules/AuthServer.pm:1074 +#: src/modules/AuthServer.pm:1074 msgid "Incomplete data." msgstr "불완전한 데이터입니다." -#: src/modules/AuthServer.pm:1101 +#: src/modules/AuthServer.pm:1101 msgid "Unsupported database type." msgstr "지원되지 않는 데이터베이스 유형입니다." -#. service was disabled during this session, just disable the service -#. in the system, stop it and ignore any configuration changes. -#: src/modules/AuthServer.pm:1546 +#. service was disabled during this session, just disable the service +#. in the system, stop it and ignore any configuration changes. +#: src/modules/AuthServer.pm:1546 msgid "Enabling LDAP Server" msgstr "LDAP 서버를 활성화 중" -#: src/modules/AuthServer.pm:1547 src/modules/AuthServer.pm:1559 +#: src/modules/AuthServer.pm:1547 src/modules/AuthServer.pm:1559 msgid "Starting LDAP Server" msgstr "LDAP 서버 시작 중" -#: src/modules/AuthServer.pm:1549 +#: src/modules/AuthServer.pm:1549 msgid "Activating OpenLDAP Server" msgstr "OpenLDAP 서버를 활성화 중" -#: src/modules/AuthServer.pm:1560 +#: src/modules/AuthServer.pm:1560 msgid "Restarting OpenLDAP Server" msgstr "OpenLDAP 서버를 재시작 중" -#: src/modules/AuthServer.pm:1569 +#: src/modules/AuthServer.pm:1569 msgid "Enabling Kerberos Server" msgstr "Kerberos 서버 활성화" -#: src/modules/AuthServer.pm:1570 +#: src/modules/AuthServer.pm:1570 msgid "Starting Kerberos Server" msgstr "Kerberos 서버 시작" -#: src/modules/AuthServer.pm:1572 +#: src/modules/AuthServer.pm:1572 msgid "Activating Kerberos Server" msgstr "Kerberos 서버 활성화" -#: src/modules/AuthServer.pm:1602 +#: src/modules/AuthServer.pm:1602 msgid "Writing Startup Configuration" msgstr "시작 구성 기록 중" -#: src/modules/AuthServer.pm:1603 +#: src/modules/AuthServer.pm:1603 msgid "Cleaning up config directory" msgstr "config 디렉토리 정리 중" -#: src/modules/AuthServer.pm:1604 +#: src/modules/AuthServer.pm:1604 msgid "Creating Configuration" msgstr "구성 생성 중" -#: src/modules/AuthServer.pm:1605 +#: src/modules/AuthServer.pm:1605 msgid "Starting OpenLDAP Server" msgstr "OpenLDAP 서버 시작 중" -#: src/modules/AuthServer.pm:1606 +#: src/modules/AuthServer.pm:1606 msgid "Creating Base Objects" msgstr "기본 객체 생성 중" -#: src/modules/AuthServer.pm:1607 +#: src/modules/AuthServer.pm:1607 msgid "Saving Kerberos Configuration" msgstr "Kerberos 구성 저장" -#: src/modules/AuthServer.pm:1608 +#: src/modules/AuthServer.pm:1608 msgid "Writing Auth Server Configuration" msgstr "AuthServer 구성 작성" -#: src/modules/AuthServer.pm:1616 src/modules/AuthServer.pm:2569 +#: src/modules/AuthServer.pm:1616 src/modules/AuthServer.pm:2569 msgid "Switch from slapd.conf to config backend failed." msgstr "slapd.conf에서 config 백엔드로 전환하지 못했습니다." -#: src/modules/AuthServer.pm:1624 +#: src/modules/AuthServer.pm:1624 msgid "Enabling the LDAPI Protocol listener failed." msgstr "LDAPI 프로토콜 리스너를 활성화하지 못했습니다." -#: src/modules/AuthServer.pm:1648 +#: src/modules/AuthServer.pm:1648 msgid "Config Directory cleanup failed." msgstr "Config 디렉토리를 정리하지 못했습니다." -#: src/modules/AuthServer.pm:1686 +#: src/modules/AuthServer.pm:1686 msgid "Error while populating the configurations database with \"slapadd\"." -msgstr "" -"구성 데이터베이스를 \"slapadd\"와 함께 생성하는 동안 오류가 발생했습니다." +msgstr "구성 데이터베이스를 \"slapadd\"와 함께 생성하는 동안 오류가 발생했습니다." -#: src/modules/AuthServer.pm:1706 +#: src/modules/AuthServer.pm:1706 msgid "Enabling the LDAP Service failed." msgstr "LDAP 서비스를 활성화하지 못했습니다." -#: src/modules/AuthServer.pm:1722 src/modules/AuthServer.pm:2600 +#: src/modules/AuthServer.pm:1722 src/modules/AuthServer.pm:2600 msgid "Starting the LDAP service failed." msgstr "LDAP 서비스를 시작하지 못했습니다." -#. service was disabled during this session, just disable the service -#. in the system, stop it and ignore any configuration changes. -#: src/modules/AuthServer.pm:1784 +#. service was disabled during this session, just disable the service +#. in the system, stop it and ignore any configuration changes. +#: src/modules/AuthServer.pm:1784 msgid "Stopping LDAP Server" msgstr "LDAP 서버 중지 중" -#: src/modules/AuthServer.pm:1785 +#: src/modules/AuthServer.pm:1785 msgid "Disabling LDAP Server" msgstr "LDAP 서버 비활성화 중" -#: src/modules/AuthServer.pm:1787 +#: src/modules/AuthServer.pm:1787 msgid "De-activating OpenLDAP Server" msgstr "OpenLDAP 서버 비활성화 중" -#. service was disabled during this session, just disable the service -#. in the system, stop it and ignore any configuration changes. -#: src/modules/AuthServer.pm:1805 +#. service was disabled during this session, just disable the service +#. in the system, stop it and ignore any configuration changes. +#: src/modules/AuthServer.pm:1805 msgid "Stopping Kerberos Server" msgstr "Kerberos 서버 중지" -#: src/modules/AuthServer.pm:1806 +#: src/modules/AuthServer.pm:1806 msgid "Disabling Kerberos Server" msgstr "Kerberos 서버 비활성화" -#: src/modules/AuthServer.pm:1808 +#: src/modules/AuthServer.pm:1808 msgid "De-activating Kerberos Server" msgstr "Kerberos 서버 비활성화" -#: src/modules/AuthServer.pm:1825 +#: src/modules/AuthServer.pm:1825 msgid "Writing Sysconfig files" msgstr "Sysconfig 파일을 쓰는 중" -#: src/modules/AuthServer.pm:1826 +#: src/modules/AuthServer.pm:1826 msgid "Applying changes to Configuration Database" msgstr "변경사항을 구성 데이터베이스에 적용 중" -#: src/modules/AuthServer.pm:1827 +#: src/modules/AuthServer.pm:1827 msgid "Applying changes to /etc/openldap/ldap.conf" msgstr "변경사항을 /etc/openldap/ldap.conf에 적용 중" -#: src/modules/AuthServer.pm:1828 +#: src/modules/AuthServer.pm:1828 msgid "Creating Base Objects for newly created databases" msgstr "새로 생성된 데이터베이스에 대해 기본 객체 생성 중" -#: src/modules/AuthServer.pm:1829 +#: src/modules/AuthServer.pm:1829 msgid "Updating Default Password Policy Objects" msgstr "기본 비밀번호 정책 객체 업데이트 중" -#: src/modules/AuthServer.pm:1830 -msgid "" -"Waiting for OpenLDAP background indexing tasks to complete (this might take " -"some minutes)" -msgstr "" -"OpenLDAP 백그라운드 인덱싱 작업이 완료될 때까지 대기(이 작업은 몇 분 정도 걸" -"릴 수 있음)" +#: src/modules/AuthServer.pm:1830 +msgid "Waiting for OpenLDAP background indexing tasks to complete (this might take some minutes)" +msgstr "OpenLDAP 백그라운드 인덱싱 작업이 완료될 때까지 대기(이 작업은 몇 분 정도 걸릴 수 있음)" -#: src/modules/AuthServer.pm:1831 +#: src/modules/AuthServer.pm:1831 msgid "Restarting OpenLDAP Server if required" msgstr "필요한 경우 OpenLDAP 서버 다시 시작" -#: src/modules/AuthServer.pm:1834 +#: src/modules/AuthServer.pm:1834 msgid "Writing AuthServer Configuration" msgstr "Writing AuthServer Configuration" -#: src/modules/AuthServer.pm:1931 +#: src/modules/AuthServer.pm:1931 msgid "Creating base objects failed." msgstr "기본 객체를 생성하지 못했습니다." -#: src/modules/AuthServer.pm:1940 +#: src/modules/AuthServer.pm:1940 msgid "Creating Password Policy objects failed." msgstr "비밀번호 정책 객체를 생성하지 못했습니다." -#: src/modules/AuthServer.pm:1953 -msgid "" -"An error occurred while waiting for the OpenLDAP database indexer to " -"finish.\n" -msgstr "" -"OpenLDAP 데이터베이스 인덱서가 완료되기를 기다리는 중 오류가 발생했습니다.\n" +#: src/modules/AuthServer.pm:1953 +msgid "An error occurred while waiting for the OpenLDAP database indexer to finish.\n" +msgstr "OpenLDAP 데이터베이스 인덱서가 완료되기를 기다리는 중 오류가 발생했습니다.\n" -#: src/modules/AuthServer.pm:1954 +#: src/modules/AuthServer.pm:1954 msgid "Restart OpenLDAP manually." msgstr "수동으로 OpenLDAP를 다시 시작하십시오." -#: src/modules/AuthServer.pm:2194 src/modules/AuthServer.pm:2214 +#: src/modules/AuthServer.pm:2194 src/modules/AuthServer.pm:2214 msgid "Register at SLP Service: " msgstr "SLP 서비스에 등록:" -#: src/modules/AuthServer.pm:2213 +#: src/modules/AuthServer.pm:2213 msgid "Start Kerberos Server: " msgstr "Kerberos 서버 시작: " -#: src/modules/AuthServer.pm:2215 +#: src/modules/AuthServer.pm:2215 msgid "Create the following databases:" msgstr "다음 데이터베이스 생성:" -#: src/modules/AuthServer.pm:2220 +#: src/modules/AuthServer.pm:2220 msgid "Database Suffix: " msgstr "데이터베이스 접미사:" -#: src/modules/AuthServer.pm:2221 +#: src/modules/AuthServer.pm:2221 msgid "Database Type: " msgstr "데이터베이스 유형:" -#: src/modules/AuthServer.pm:2227 +#: src/modules/AuthServer.pm:2227 msgid "Not configured yet." msgstr "아직 구성되지 않았습니다." -#: src/modules/AuthServer.pm:2472 +#: src/modules/AuthServer.pm:2472 msgid "CA Certificate file does not exist." msgstr "CA 인증서 파일이 없습니다." -#: src/modules/AuthServer.pm:2477 +#: src/modules/AuthServer.pm:2477 msgid "Certificate File does not exist" msgstr "인증서 파일이 없습니다." -#. error message -#: src/modules/AuthServer.pm:2482 src/modules/YaPI/LdapServer.pm:1752 +#. error message +#: src/modules/AuthServer.pm:2482 src/modules/YaPI/LdapServer.pm:1752 msgid "Certificate key file does not exist." msgstr "인증서 키 파일이 존재하지 않습니다." -#: src/modules/AuthServer.pm:2489 src/modules/AuthServer.pm:2523 +#: src/modules/AuthServer.pm:2489 src/modules/AuthServer.pm:2523 msgid "Can not set a filesystem ACL on the private key." msgstr "개인 키에 파일 시스템 ACL을 설정할 수 없습니다." -#: src/modules/AuthServer.pm:2491 +#: src/modules/AuthServer.pm:2491 msgid "Do you have filesystem acl support disabled?" msgstr "파일 시스템 ACL 지원이 비활성화되었습니까?" -#: src/modules/AuthServer.pm:2545 +#: src/modules/AuthServer.pm:2545 msgid "Cleaning up directory for config database" msgstr "config 데이터베이스에 대한 디렉토리 정리 중" -#: src/modules/AuthServer.pm:2546 +#: src/modules/AuthServer.pm:2546 msgid "Converting slapd.conf to config database" msgstr "slapd.conf를 config 데이터베이스로 변환 중" -#: src/modules/AuthServer.pm:2547 +#: src/modules/AuthServer.pm:2547 msgid "Switching startup configuration to use config database" msgstr "config 데이터베이스를 사용하도록 시작 구성 전환" -#: src/modules/AuthServer.pm:2548 +#: src/modules/AuthServer.pm:2548 msgid "Restarting LDAP Server" msgstr "LDAP 서버 재시작 중" -#: src/modules/AuthServer.pm:2549 +#: src/modules/AuthServer.pm:2549 msgid "Migrating LDAP Server Configuration" msgstr "LDAP 서버 구성 마이그레이션 중" -#: src/modules/AuthServer.pm:2559 +#: src/modules/AuthServer.pm:2559 msgid "Output of \"slaptest\":\n" msgstr "\"slaptest\" 출력:\n" -#: src/modules/AuthServer.pm:2560 +#: src/modules/AuthServer.pm:2560 msgid "Migration of existing configuration failed." msgstr "기존 구성을 마이그레이션하지 못했습니다." -#: src/modules/AuthServer.pm:2579 src/modules/AuthServer.pm:2587 +#: src/modules/AuthServer.pm:2579 src/modules/AuthServer.pm:2587 msgid "Enabling LDAPI listener failed." msgstr "LDAPI 리스너를 활성화하지 못했습니다." -#: src/modules/AuthServer.pm:2709 +#: src/modules/AuthServer.pm:2709 msgid "Common server certificate not available. StartTLS is disabled." msgstr "일반 서버 인증서를 사용할 수 없습니다. StartTLS가 비활성화됩니다." -#: src/modules/AuthServer.pm:2803 +#: src/modules/AuthServer.pm:2803 msgid "Could not create database directory." msgstr "데이터베이스 디렉토리를 생성할 수 없습니다." -#: src/modules/AuthServer.pm:2810 src/modules/AuthServer.pm:4107 -#: src/modules/YaPI/LdapServer.pm:498 +#: src/modules/AuthServer.pm:2810 src/modules/AuthServer.pm:4107 +#: src/modules/YaPI/LdapServer.pm:498 msgid "Could not adjust ownership of database directory." msgstr "데이터베이스 디렉토리의 소유권을 조정할 수 없습니다." -#: src/modules/AuthServer.pm:2859 +#: src/modules/AuthServer.pm:2859 msgid "Could not determine own fully qualified hostname." msgstr "고유한 정규화된 호스트 이름을 확인할 수 없습니다." -#: src/modules/AuthServer.pm:2860 -msgid "" -"A master server for replication cannot work correctly without knowing its " -"own fully qualified hostname." -msgstr "" -"고유한 정규화된 호스트 이름을 모르면 복제 마스터 서버가 제대로 작동할 수 없습" -"니다." +#: src/modules/AuthServer.pm:2860 +msgid "A master server for replication cannot work correctly without knowing its own fully qualified hostname." +msgstr "고유한 정규화된 호스트 이름을 모르면 복제 마스터 서버가 제대로 작동할 수 없습니다." -#: src/modules/AuthServer.pm:3376 src/modules/AuthServer.pm:3389 -#: src/modules/AuthServer.pm:3402 src/modules/AuthServer.pm:3415 -#: src/modules/AuthServer.pm:3428 +#: src/modules/AuthServer.pm:3376 src/modules/AuthServer.pm:3389 +#: src/modules/AuthServer.pm:3402 src/modules/AuthServer.pm:3415 +#: src/modules/AuthServer.pm:3428 msgid "Cannot write krb5.conf." msgstr "krb5.conf를 쓸 수 없습니다." -#: src/modules/AuthServer.pm:3514 +#: src/modules/AuthServer.pm:3514 msgid "Creating Kerberos database failed." msgstr "Kerberos 데이터베이스를 생성하지 못했습니다." -#: src/modules/AuthServer.pm:3566 src/modules/AuthServer.pm:3612 +#: src/modules/AuthServer.pm:3566 src/modules/AuthServer.pm:3612 msgid "Writing to password file failed." msgstr "비밀번호 파일에 쓰지 못했습니다." -#: src/modules/AuthServer.pm:3978 src/modules/AuthServer.pm:3988 +#: src/modules/AuthServer.pm:3978 src/modules/AuthServer.pm:3988 msgid "is not a valid LDAP DN." msgstr "유효한 LDAP DN이 아닙니다." -#: src/modules/AuthServer.pm:3983 src/modules/AuthServer.pm:3993 +#: src/modules/AuthServer.pm:3983 src/modules/AuthServer.pm:3993 msgid "has multivalued RDNs." msgstr "RDN 값이 여러 개입니다." -#: src/modules/AuthServer.pm:4025 +#: src/modules/AuthServer.pm:4025 #, perl-format msgid "Invalid LDAP DN: \"%s\", cannot extract RDN values" msgstr "잘못된 LDAP DN: \"%s\". RDN 값을 추출할 수 없습니다." -#: src/modules/AuthServer.pm:4033 -msgid "" -"The value of the \"c\" attribute must contain a valid ISO-3166 country 2-" -"letter code." -msgstr "" -"\"c\" 특성 값에는 유효한 ISO-3166 국가 코드(두 자)가 포함되어야 합니다." +#: src/modules/AuthServer.pm:4033 +msgid "The value of the \"c\" attribute must contain a valid ISO-3166 country 2-letter code." +msgstr "\"c\" 특성 값에는 유효한 ISO-3166 국가 코드(두 자)가 포함되어야 합니다." -#. parameter check failed -#: src/modules/AuthServer.pm:4040 src/modules/YaPI/LdapServer.pm:373 +#. parameter check failed +#: src/modules/AuthServer.pm:4040 src/modules/YaPI/LdapServer.pm:373 msgid "First part of suffix must be c=, st=, l=, o=, ou= or dc=." msgstr "접미사의 첫 번째 부분은 c=, st=, l=, o=, ou= or dc=이어야 합니다." -#: src/modules/AuthServer.pm:4052 +#: src/modules/AuthServer.pm:4052 #, perl-format msgid "Base DN \"%s\" is not a valid LDAP DN." msgstr "기본 DN \"%s\"은(는) 유효한 LDAP DN이 아닙니다." -#: src/modules/AuthServer.pm:4057 +#: src/modules/AuthServer.pm:4057 #, perl-format msgid "Base DN \"%s\" has multivalued RDNs (not supported by YaST)." -msgstr "" -"기본 DN \"%s\"에는 다중 값 RDN이 포함되어 있습니다(YaST에서 지원되지 않음)." +msgstr "기본 DN \"%s\"에는 다중 값 RDN이 포함되어 있습니다(YaST에서 지원되지 않음)." -#: src/modules/AuthServer.pm:4066 +#: src/modules/AuthServer.pm:4066 #, perl-format msgid "Root DN \"%s\" is not a valid LDAP DN." msgstr "루트 DN \"%s\"은(는) 유효한 LDAP DN이 아닙니다." -#: src/modules/AuthServer.pm:4071 +#: src/modules/AuthServer.pm:4071 #, perl-format msgid "Root DN \"%s\" has multivalued RDNs (not supported by YaST)." -msgstr "" -"루트 DN \"%s\"에는 다중 값 RDN이 포함되어 있습니다(YaST에서 지원되지 않음)." +msgstr "루트 DN \"%s\"에는 다중 값 RDN이 포함되어 있습니다(YaST에서 지원되지 않음)." -#: src/modules/AuthServer.pm:4078 +#: src/modules/AuthServer.pm:4078 msgid "The Root DN must be a child object of the Base DN." msgstr "루트 DN이 베이스 DN의 하위 객체여야 합니다." -#: src/modules/AuthServer.pm:4100 src/modules/YaPI/LdapServer.pm:484 +#: src/modules/AuthServer.pm:4100 src/modules/YaPI/LdapServer.pm:484 msgid "Could not create directory." msgstr "디렉토리를 작성할 수 없습니다." -#: src/modules/AuthServer.pm:4877 +#: src/modules/AuthServer.pm:4877 #, perl-format msgid "CA Certificate File: \"%s\" does not exist." msgstr "CA 인증서 파일 \"%s\"이(가) 존재하지 않습니다." -#: src/modules/AuthServer.pm:4887 -msgid "" -"Error while trying to verify the server certificate of the provider server.\n" +#: src/modules/AuthServer.pm:4887 +msgid "Error while trying to verify the server certificate of the provider server.\n" msgstr "공급자 서버의 서버 인증서를 확인하는 중 오류가 발생했습니다.\n" -#: src/modules/AuthServer.pm:4888 +#: src/modules/AuthServer.pm:4888 #, perl-format msgid "" "Please make sure that \"%s\" contains the correct\n" @@ -3640,167 +3308,166 @@ "\"%s\"에 원격 서버 인증서를 확인하는 데 올바른\n" "CA 파일이 포함되어 있는지 확인하십시오." -#: src/modules/AuthServer.pm:4896 +#: src/modules/AuthServer.pm:4896 #, perl-format msgid "Certificate File: \"%s\" does not exist." msgstr "인증서 파일 \"%s\"이(가) 존재하지 않습니다." -#: src/modules/AuthServer.pm:4901 +#: src/modules/AuthServer.pm:4901 #, perl-format msgid "Certificate Key File: \"%s\" does not exist." msgstr "인증서 키 파일 \"%s\"이(가) 존재하지 않습니다." -#: src/modules/AuthServer.pm:4982 src/modules/AuthServer.pm:4992 +#: src/modules/AuthServer.pm:4982 src/modules/AuthServer.pm:4992 msgid "Writing to krb5.conf failed." msgstr "krb5.conf에 쓰지 못했습니다." -#: src/modules/AuthServer.pm:5360 src/modules/AuthServer.pm:5369 +#: src/modules/AuthServer.pm:5360 src/modules/AuthServer.pm:5369 msgid "Writing to kdc.conf failed." msgstr "kdc.conf에 쓰지 못했습니다." -#. error at paramter check -#: src/modules/YaPI/LdapServer.pm:301 +#. error at paramter check +#: src/modules/YaPI/LdapServer.pm:301 #, perl-format msgid "Database type '%s' is not supported. Allowed are 'bdb' and 'hdb'." -msgstr "" -"데이터베이스 유형 '%s'이(가) 지원되지 않습니다. 'bdb'와 'hdb'가 허용됩니다." +msgstr "데이터베이스 유형 '%s'이(가) 지원되지 않습니다. 'bdb'와 'hdb'가 허용됩니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:347 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:347 msgid "The countryName must be an ISO-3166 country 2-letter code." msgstr "국가명은 ISO-3166 국가 2글자 코드여야 합니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:391 src/modules/YaPI/LdapServer.pm:726 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:391 src/modules/YaPI/LdapServer.pm:726 msgid "Invalid 'rootdn'." msgstr "'rootdn'이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:400 src/modules/YaPI/LdapServer.pm:734 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:400 src/modules/YaPI/LdapServer.pm:734 msgid "'rootdn' must be below the 'suffix'." msgstr "'rootdn'은 '접미사' 아래에 와야 합니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:415 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:415 msgid "To set a password, you must define 'rootdn'." msgstr "비밀번호를 설정하려면 'rootdn'을 정의해야 합니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:422 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:422 msgid "Define 'rootpw'." msgstr "'rootpw'를 정의하십시오." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:435 src/modules/YaPI/LdapServer.pm:768 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:435 src/modules/YaPI/LdapServer.pm:768 #, perl-format msgid "'%s' is an unsupported crypt method." msgstr "'%s'은(는) 지원되지 않는 암호화 방법입니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:475 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:475 msgid "Define 'directory'." msgstr "'디렉토리'를 정의하십시오." -#: src/modules/YaPI/LdapServer.pm:489 +#: src/modules/YaPI/LdapServer.pm:489 msgid "The directory does not exist." msgstr "디렉토리가 존재하지 않습니다." -#: src/modules/YaPI/LdapServer.pm:511 src/modules/YaPI/LdapServer.pm:526 +#: src/modules/YaPI/LdapServer.pm:511 src/modules/YaPI/LdapServer.pm:526 msgid "Invalid cache size value." msgstr "캐시 크기 값이 잘못되었습니다." -#: src/modules/YaPI/LdapServer.pm:547 +#: src/modules/YaPI/LdapServer.pm:547 msgid "Invalid checkpoint value." msgstr "검사점 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/LdapServer.pm:753 src/modules/YaPI/LdapServer.pm:758 +#. parameter check failed +#: src/modules/YaPI/LdapServer.pm:753 src/modules/YaPI/LdapServer.pm:758 msgid "Define 'passwd'." msgstr "'passwd'를 정의하십시오." -#: src/modules/YaPI/LdapServer.pm:805 +#: src/modules/YaPI/LdapServer.pm:805 msgid "Database edit failed." msgstr "데이터베이스 편집에 실패했습니다." -#. error message at parameter check -#: src/modules/YaPI/LdapServer.pm:865 src/modules/YaPI/LdapServer.pm:938 -#: src/modules/YaPI/LdapServer.pm:1086 src/modules/YaPI/LdapServer.pm:1129 +#. error message at parameter check +#: src/modules/YaPI/LdapServer.pm:865 src/modules/YaPI/LdapServer.pm:938 +#: src/modules/YaPI/LdapServer.pm:1086 src/modules/YaPI/LdapServer.pm:1129 msgid "Missing parameter 'suffix'." msgstr "'suffix' 매개변수가 누락되었습니다." -#: src/modules/YaPI/LdapServer.pm:1533 +#: src/modules/YaPI/LdapServer.pm:1533 msgid "Cannot restart the service." msgstr "서비스를 재시작할 수 없습니다." -#: src/modules/YaPI/LdapServer.pm:1540 +#: src/modules/YaPI/LdapServer.pm:1540 msgid "Cannot stop the service." msgstr "서비스를 중지할 수 없습니다." -#. error message -#: src/modules/YaPI/LdapServer.pm:1703 +#. error message +#: src/modules/YaPI/LdapServer.pm:1703 msgid "CA certificate file does not exist." msgstr "CA 인증서 파일이 존재하지 않습니다." -#. error message -#: src/modules/YaPI/LdapServer.pm:1719 +#. error message +#: src/modules/YaPI/LdapServer.pm:1719 msgid "CA certificate path does not exist." msgstr "CA 인증서 경로가 존재하지 않습니다." -#. error message -#: src/modules/YaPI/LdapServer.pm:1735 +#. error message +#: src/modules/YaPI/LdapServer.pm:1735 msgid "Certificate file does not exist." msgstr "인증서 파일이 존재하지 않습니다." -#. error message -#: src/modules/YaPI/LdapServer.pm:1770 +#. error message +#: src/modules/YaPI/LdapServer.pm:1770 msgid "Invalid value for 'TLSVerifyClient'." msgstr "'TLSVerifyClient'에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/LdapServer.pm:1779 +#: src/modules/YaPI/LdapServer.pm:1779 msgid "Writing failed." msgstr "쓰기에 실패했습니다." -#: src/modules/YaPI/LdapServer.pm:1944 +#: src/modules/YaPI/LdapServer.pm:1944 msgid "Missing 'ServerCertificateFile' parameter." msgstr "'ServerCertificateFile' 매개변수가 누락되었습니다." -#: src/modules/YaPI/LdapServer.pm:1950 +#: src/modules/YaPI/LdapServer.pm:1950 msgid "Cannot read certificate file." msgstr "인증서 파일을 읽을 수 없습니다." -#: src/modules/YaPI/LdapServer.pm:1955 +#: src/modules/YaPI/LdapServer.pm:1955 msgid "Missing 'ServerCertificateData' parameter." msgstr "'ServerCertificateData' 매개변수가 누락되었습니다." -#: src/modules/YaPI/LdapServer.pm:1962 src/modules/YaPI/LdapServer.pm:1987 -#: src/modules/YaPI/LdapServer.pm:2003 src/modules/YaPI/LdapServer.pm:2012 +#: src/modules/YaPI/LdapServer.pm:1962 src/modules/YaPI/LdapServer.pm:1987 +#: src/modules/YaPI/LdapServer.pm:2003 src/modules/YaPI/LdapServer.pm:2012 msgid "Corrupt PEM data." msgstr "PEM 데이터가 손상되었습니다." -#: src/modules/YaPI/LdapServer.pm:1969 +#: src/modules/YaPI/LdapServer.pm:1969 msgid "Missing 'ServerKeyFile' parameter." msgstr "'ServerKeyFile' 매개변수가 누락되었습니다." -#: src/modules/YaPI/LdapServer.pm:1975 +#: src/modules/YaPI/LdapServer.pm:1975 msgid "Cannot read key file." msgstr "키 파일을 읽을 수 없습니다." -#: src/modules/YaPI/LdapServer.pm:1980 +#: src/modules/YaPI/LdapServer.pm:1980 msgid "Missing 'ServerKeyData' parameter." msgstr "'ServerKeyData' 매개변수가 누락되었습니다." -#: src/modules/YaPI/LdapServer.pm:1998 +#: src/modules/YaPI/LdapServer.pm:1998 msgid "Cannot read CA certificate file." msgstr "CA 인증서 파일을 읽을 수 없습니다." -#: src/modules/YaPI/LdapServer.pm:2021 +#: src/modules/YaPI/LdapServer.pm:2021 msgid "Cannot write certificate file." msgstr "인증서 파일을 쓸 수 없습니다." -#: src/modules/YaPI/LdapServer.pm:2027 +#: src/modules/YaPI/LdapServer.pm:2027 msgid "Cannot write key file." msgstr "키 파일을 쓸 수 없습니다." -#: src/modules/YaPI/LdapServer.pm:2046 +#: src/modules/YaPI/LdapServer.pm:2046 msgid "Cannot write CA certificate file." msgstr "CA 인증서 파일을 쓸 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/autoinst.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/autoinst.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/autoinst.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -15,47 +15,47 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#. progress step title -#. progress step title -#: src/clients/autoinst_scripts1_finish.rb:47 -#: src/clients/autoinst_scripts2_finish.rb:45 +#. progress step title +#. progress step title +#: src/clients/autoinst_scripts1_finish.rb:47 +#: src/clients/autoinst_scripts2_finish.rb:45 msgid "Executing autoinstall scripts in the installation environment..." msgstr "설치 환경에서 자동설치 스크립트 실행 중..." -#. encoding: utf-8 -#: src/clients/autoinst_test_clone.rb:15 +#. encoding: utf-8 +#: src/clients/autoinst_test_clone.rb:15 msgid "Reading configuration data..." msgstr "구성 데이터 읽는 중..." -#: src/clients/autoinst_test_clone.rb:16 src/clients/autoyast.rb:123 -#: src/include/autoinstall/conftree.rb:622 -#: src/include/autoinstall/dialogs.rb:333 src/modules/Profile.rb:363 +#: src/clients/autoinst_test_clone.rb:16 src/clients/autoyast.rb:123 +#: src/include/autoinstall/conftree.rb:622 +#: src/include/autoinstall/dialogs.rb:333 src/modules/Profile.rb:363 msgid "This may take a while" msgstr "약간의 시간이 소요될 수 있습니다." -#. encoding: utf-8 -#. File: clients/autoyast.ycp -#. Summary: Main file for client call -#. Authors: Anas Nashif -#. -#. $Id$ -#: src/clients/autoyast.rb:35 +#. encoding: utf-8 +#. File: clients/autoyast.ycp +#. Summary: Main file for client call +#. Authors: Anas Nashif +#. +#. $Id$ +#: src/clients/autoyast.rb:35 msgid "Error while reading configuration data." msgstr "설정 데이타를 불러오는 동안 에러가 발생하였습니다." -#: src/clients/autoyast.rb:68 +#: src/clients/autoyast.rb:68 msgid "AutoYaST" msgstr "AutoYast" -#. command line options -#. Init variables -#. unique id -#. Backup -#. Now check if there any classes defined in theis pre final control file -#: src/clients/autoyast.rb:114 src/clients/ayast_setup.rb:148 -#: src/clients/inst_autoinit.rb:184 src/clients/inst_autosetup.rb:463 -#: src/clients/inst_autosetup_upgrade.rb:485 -#: src/modules/AutoInstallRules.rb:997 +#. command line options +#. Init variables +#. unique id +#. Backup +#. Now check if there any classes defined in theis pre final control file +#: src/clients/autoyast.rb:114 src/clients/ayast_setup.rb:148 +#: src/clients/inst_autoinit.rb:184 src/clients/inst_autosetup.rb:463 +#: src/clients/inst_autosetup_upgrade.rb:485 +#: src/modules/AutoInstallRules.rb:997 msgid "" "Error while parsing the control file.\n" "Check the log files for more details or fix the\n" @@ -65,147 +65,141 @@ "보다 자세한 내용과 수정을 위해서는 로그 파일을 참조하십시오.\n" "제어파일을 수정하고 다시 시도해 주십시오.\n" -#: src/clients/autoyast.rb:122 src/include/autoinstall/conftree.rb:621 -#: src/include/autoinstall/dialogs.rb:332 +#: src/clients/autoyast.rb:122 src/include/autoinstall/conftree.rb:621 +#: src/include/autoinstall/dialogs.rb:332 msgid "Reading configuration data" msgstr "구성 데이터 읽는 중" -#. encoding: utf-8 -#. * File: -#. * Package: Auto-installation -#. * Author: Uwe Gansert -#. * Summary: -#. * -#. * Changes: * initial -#. 0.2: * added Pkg::TargetInit -#. 0.3: * support for <post-packages> -#. 0.4: * support for the <ask> feature -#. 0.5: * support for the new "keep install network" -#. feature of 10.3 -#. * Version: 0.5 -#. * $Id$ -#. -#. this client can be called from a running system, -#. to do the autoyast configuration. -#. You have to provide a profile and autoyast will -#. configure your system like in the profile. -#. Only stage2 configuration can be done. -#. yast2 ./ayast_setup.rb setup filename=/tmp/my.xml -#: src/clients/ayast_setup.rb:48 +#. encoding: utf-8 +#. * File: +#. * Package: Auto-installation +#. * Author: Uwe Gansert +#. * Summary: +#. * +#. * Changes: * initial +#. 0.2: * added Pkg::TargetInit +#. 0.3: * support for <post-packages> +#. 0.4: * support for the <ask> feature +#. 0.5: * support for the new "keep install network" +#. feature of 10.3 +#. * Version: 0.5 +#. * $Id$ +#. +#. this client can be called from a running system, +#. to do the autoyast configuration. +#. You have to provide a profile and autoyast will +#. configure your system like in the profile. +#. Only stage2 configuration can be done. +#. yast2 ./ayast_setup.rb setup filename=/tmp/my.xml +#: src/clients/ayast_setup.rb:48 msgid "Client for AutoYaST configuration on the running system" msgstr "실행 중인 시스템의 AutoYaST 구성에 대한 클라이언트" -#: src/clients/ayast_setup.rb:58 +#: src/clients/ayast_setup.rb:58 msgid "Configure the system using given AutoYaST profile" msgstr "주어진 AutoYaST 프로파일을 사용하여 시스템 구성" -#: src/clients/ayast_setup.rb:65 +#: src/clients/ayast_setup.rb:65 msgid "Path to AutoYaST profile" msgstr "AutoYaST 프로파일 경로" -#: src/clients/ayast_setup.rb:70 +#: src/clients/ayast_setup.rb:70 msgid "enable/disable all package handling" msgstr "모든 패키지 처리 활성화/비활성화" -#: src/clients/ayast_setup.rb:87 src/clients/clone_system.rb:101 +#: src/clients/ayast_setup.rb:87 src/clients/clone_system.rb:101 msgid "Empty parameter list" msgstr "비어 있는 파라미터 목록" -#. the following is needed since 10.3 -#. otherwise the already configured network gets removed -#: src/clients/ayast_setup.rb:135 +#. the following is needed since 10.3 +#. otherwise the already configured network gets removed +#: src/clients/ayast_setup.rb:135 msgid "Path to AutoYaST profile must be set." msgstr "AutoYaST 프로파일의 경로를 설정해야 합니다." -#. if we get no argument or map of options we are not in command line -#: src/clients/clone_system.rb:66 -msgid "" -"Client for creating an AutoYaST profile based on the currently running system" -msgstr "" -"현재 실행 중인 시스템을 기준으로 AutoYaST 프로파일을 생성하기 위한 클라이언트" +#. if we get no argument or map of options we are not in command line +#: src/clients/clone_system.rb:66 +msgid "Client for creating an AutoYaST profile based on the currently running system" +msgstr "현재 실행 중인 시스템을 기준으로 AutoYaST 프로파일을 생성하기 위한 클라이언트" -#: src/clients/clone_system.rb:76 +#: src/clients/clone_system.rb:76 msgid "known modules: %1" msgstr "알려진 모듈: %1" -#: src/clients/clone_system.rb:83 +#: src/clients/clone_system.rb:83 msgid "comma separated list of modules to clone" msgstr "복제할 모듈의 쉼표로 구분된 목록" -#. TRANSLATORS: Warning that an already existing autoyast configuration file will be overwritten. -#: src/clients/clone_system.rb:114 +#. TRANSLATORS: Warning that an already existing autoyast configuration file will be overwritten. +#: src/clients/clone_system.rb:114 msgid "File %s exists! Really overwrite?" msgstr "파일 %s이(가) 이미 존재합니다. 덮어씁니까?" -#: src/clients/clone_system.rb:118 +#: src/clients/clone_system.rb:118 msgid "Cloning the system..." msgstr "시스템 복제 중..." -#. TRANSLATORS: %s is path where profile can be found -#: src/clients/clone_system.rb:120 +#. TRANSLATORS: %s is path where profile can be found +#: src/clients/clone_system.rb:120 msgid "The resulting autoyast profile can be found in %s." msgstr "결과 autoyast 프로파일은 %s에서 찾을 수 있습니다." -#. help 1/2 -#: src/clients/files_auto.rb:170 +#. help 1/2 +#: src/clients/files_auto.rb:170 msgid "" "<p>Using this dialog, copy the contents of the file and specify the final\n" -"path on the installed system. YaST will copy this file to the specified " -"location.</p>" +"path on the installed system. YaST will copy this file to the specified location.</p>" msgstr "" "<p>이 대화 상자로 파일의 내용을 복사하고 설치된 시스템의 최종 \n" "경로를 지정하십시오. YaST는 이 파일을 지정한 위치에 복사하게 됩니다.</p>" -#. help 2/2 -#: src/clients/files_auto.rb:177 +#. help 2/2 +#: src/clients/files_auto.rb:177 msgid "" "<p>To protect copied files, set the owner and the permissions of the files.\n" -"Set the owner using the syntax <i>userid:groupid</i>. Permissions can be a " -"symbolic\n" -"representation of changes to make or an octal number representing the bit " -"pattern for the\n" +"Set the owner using the syntax <i>userid:groupid</i>. Permissions can be a symbolic\n" +"representation of changes to make or an octal number representing the bit pattern for the\n" "new permissions.</p>" msgstr "" "<p>복사된 파일을 보호하려면 파일의 소유자와 권한을 설정하십시오.\n" "<i>userid:groupid</i> 구문을 사용하여 소유자를 설정하십시오. 권한은 변경할\n" -" 내용에 대한 심볼 표현이 될 수도 있고 새 권한에 대한 비트 패턴을 표현하는 8진" -"수가\n" +" 내용에 대한 심볼 표현이 될 수도 있고 새 권한에 대한 비트 패턴을 표현하는 8진수가\n" " 될 수도 있습니다.</p>" -#: src/clients/files_auto.rb:185 +#: src/clients/files_auto.rb:185 msgid "Configuration File Editor" msgstr "파일 편집기 설정" -#: src/clients/files_auto.rb:191 +#: src/clients/files_auto.rb:191 msgid "&File Path" msgstr "파일 경로(&F)" -#: src/clients/files_auto.rb:200 +#: src/clients/files_auto.rb:200 msgid "&Owner" msgstr "소유자(&O)" -#: src/clients/files_auto.rb:206 +#: src/clients/files_auto.rb:206 msgid "&Permissions" msgstr "권한(&P)" -#: src/clients/files_auto.rb:214 +#: src/clients/files_auto.rb:214 msgid "&Retrieve from" msgstr "검색 소스(&R)" -#: src/clients/files_auto.rb:221 +#: src/clients/files_auto.rb:221 msgid "File So&urce" msgstr "파일 소스(&U)" -#: src/clients/files_auto.rb:226 +#: src/clients/files_auto.rb:226 msgid "&Load new contents" msgstr "새로운 항목 적재(&L)" -#. why? -#. if (mode == `edit) -#. { -#. UI::ChangeWidget(`id(`filename), `Enabled, false); -#. } -#: src/clients/files_auto.rb:263 +#. why? +#. if (mode == `edit) +#. { +#. UI::ChangeWidget(`id(`filename), `Enabled, false); +#. } +#: src/clients/files_auto.rb:263 msgid "" "Provide at least the file\n" "name and the contents of the file.\n" @@ -213,40 +207,38 @@ "적어도 파일 이름과\n" "파일 내용은 제공하십시오.\n" -#. OPEN -#: src/clients/files_auto.rb:273 src/include/autoinstall/conftree.rb:605 -#: src/include/autoinstall/script_dialogs.rb:397 +#. OPEN +#: src/clients/files_auto.rb:273 src/include/autoinstall/conftree.rb:605 +#: src/include/autoinstall/script_dialogs.rb:397 msgid "Select a file to load." msgstr "로드할 파일을 선택합니다." -#. Summary of configuration -#: src/clients/files_auto.rb:301 +#. Summary of configuration +#: src/clients/files_auto.rb:301 msgid "Available Files" msgstr "사용가능한 파일들" -#: src/clients/files_auto.rb:305 +#: src/clients/files_auto.rb:305 msgid "File Path" msgstr "파일경로" -#: src/clients/files_auto.rb:305 +#: src/clients/files_auto.rb:305 msgid "Owner" msgstr "소유자" -#: src/clients/files_auto.rb:305 +#: src/clients/files_auto.rb:305 msgid "Permissions" msgstr "권한" -#: src/clients/files_auto.rb:319 +#: src/clients/files_auto.rb:319 msgid "Add Complete Configuration Files" msgstr "완벽한 설정파일 추가" -#: src/clients/files_auto.rb:321 +#: src/clients/files_auto.rb:321 msgid "" "<p>For many applications and services, you might have prepared\n" -"a configuration file that should be copied in a complete form to a location " -"in the\n" -"installed system. For example, this is the case if you are installing a web " -"server\n" +"a configuration file that should be copied in a complete form to a location in the\n" +"installed system. For example, this is the case if you are installing a web server\n" "and have an httpd.conf configuration file prepared.</p>" msgstr "" "<p>대부분의 응용 프로그램과 서비스에 대해서는 설치된 시스템의\n" @@ -254,12 +246,12 @@ "있습니다. 웹 서버를 설치할 때 사용할 httpd.conf 구성 파일을\n" "예로 들 수 있습니다.</p>" -#: src/clients/files_auto.rb:332 +#: src/clients/files_auto.rb:332 msgid "Select a file from the table first." msgstr "첫번째 테이블에서 파일을 선택하십시오." -#. Help text for last dialog of base installation -#: src/clients/inst_autoconfigure.rb:38 +#. Help text for last dialog of base installation +#: src/clients/inst_autoconfigure.rb:38 msgid "" "<p>\n" "Please wait while the system is being configured.\n" @@ -269,77 +261,69 @@ "시스템 구성이 완료될 때까지 기다려 주십시오.\n" "</p>" -#. Progress bar that displays overall progress in this dialog -#: src/clients/inst_autoconfigure.rb:63 +#. Progress bar that displays overall progress in this dialog +#: src/clients/inst_autoconfigure.rb:63 msgid "Progress" msgstr "진행률" -#. Dialog title for autoyast dialog -#: src/clients/inst_autoconfigure.rb:72 +#. Dialog title for autoyast dialog +#: src/clients/inst_autoconfigure.rb:72 msgid "Configuring System according to auto-install settings" msgstr "자동 설치 설정에 따라 시스템을 구성 중입니다." -#. TRANSLATORS: Error message, %s is replaced by newline-separated -#. list of unknown sections of the profile -#. Do not translate words in brackets -#: src/clients/inst_autoconfigure.rb:94 -msgid "" -"These sections of AutoYaST profile cannot be processed on this system:" -"<br><br>%s<br><br>Maybe they were misspelled or your profile does not " -"contain all the needed YaST packages in <software/> section." -msgstr "" -"다음 AutoYaST 프로파일 섹션은 이 시스템에서 처리할 수 없습니다.<br><br>" -"%s<br><br>철자가 틀렸거나 프로필에 <software/> 섹션의 모든 필수 YaST 패" -"키지가 없을 수 있습니다." +#. TRANSLATORS: Error message, %s is replaced by newline-separated +#. list of unknown sections of the profile +#. Do not translate words in brackets +#: src/clients/inst_autoconfigure.rb:94 +msgid "These sections of AutoYaST profile cannot be processed on this system:<br><br>%s<br><br>Maybe they were misspelled or your profile does not contain all the needed YaST packages in <software/> section." +msgstr "다음 AutoYaST 프로파일 섹션은 이 시스템에서 처리할 수 없습니다.<br><br>%s<br><br>철자가 틀렸거나 프로필에 <software/> 섹션의 모든 필수 YaST 패키지가 없을 수 있습니다." -#. determine name of client, if not use default name -#. Call::Function(module_auto, ["Import", eval(Profile::current[resource]:$[]) ]); -#: src/clients/inst_autoconfigure.rb:184 -#: src/clients/inst_autoconfigure.rb:213 -#: src/clients/inst_autoconfigure.rb:226 +#. determine name of client, if not use default name +#. Call::Function(module_auto, ["Import", eval(Profile::current[resource]:$[]) ]); +#: src/clients/inst_autoconfigure.rb:184 src/clients/inst_autoconfigure.rb:213 +#: src/clients/inst_autoconfigure.rb:226 msgid "Configuring %1" msgstr "%1 구성" -#: src/clients/inst_autoconfigure.rb:186 -#: src/clients/inst_autoconfigure.rb:215 -#: src/clients/inst_autoconfigure.rb:228 +#: src/clients/inst_autoconfigure.rb:186 src/clients/inst_autoconfigure.rb:215 +#: src/clients/inst_autoconfigure.rb:228 msgid "Not Configuring %1" msgstr "%1 구성 안 함" -#. online update -#: src/clients/inst_autoconfigure.rb:280 +#. online update +#: src/clients/inst_autoconfigure.rb:280 msgid "Executing Post-Scripts" msgstr "후행-스크립트 실행중" -#. Do not restart NetworkManager* services -#. bnc#955260 -#: src/clients/inst_autoconfigure.rb:305 +#. Do not restart NetworkManager* services +#. bnc#955260 +#: src/clients/inst_autoconfigure.rb:305 msgid "Restarting all running services" msgstr "실행 중인 모든 서비스 다시 시작" -#. Filtering out all services which must not to be restarted -#: src/clients/inst_autoconfigure.rb:327 +#. Filtering out all services which must not to be restarted +#: src/clients/inst_autoconfigure.rb:327 msgid "Activating systemd default target" msgstr "시스템 기본 대상 활성화" -#. Just in case, remove this file to avoid reconfiguring... -#: src/clients/inst_autoconfigure.rb:342 +#. Just in case, remove this file to avoid reconfiguring... +#: src/clients/inst_autoconfigure.rb:342 msgid "Finishing Configuration" msgstr "설정 완료중" -#. NetworkInterfaces::Write( ".*" ); -#: src/clients/inst_autoconfigure.rb:448 +#. NetworkInterfaces::Write( ".*" ); +#: src/clients/inst_autoconfigure.rb:448 msgid "Processing resource %1" msgstr "%1 리소스 처리" -#. encoding: utf-8 -#. File: clients/inst_autoimage.ycp -#. Package: Auto-installation -#. Author: Anas Nashif -#. Summary: Imaging -#. -#. $Id$ -#: src/clients/inst_autoimage.rb:31 +#. encoding: utf-8 +#. File: clients/inst_autoimage.ycp +#. Package: Auto-installation +#. Author: Anas Nashif +#. Summary: Imaging +#. +#. $Id$ +#: src/clients/inst_autoimage.rb:31 msgid "" "<p>\n" "Please wait while the image is retrieved.</p>\n" @@ -347,32 +331,32 @@ "<p>\n" "이미지를 검색하는 동안 잠시 기다려 주십시오.</p>\n" -#: src/clients/inst_autoimage.rb:32 +#: src/clients/inst_autoimage.rb:32 msgid "Retrieve Image File" msgstr "이미지 파일 검색" -#: src/clients/inst_autoimage.rb:32 +#: src/clients/inst_autoimage.rb:32 msgid "Install image file" msgstr "이미지 파일 설치" -#: src/clients/inst_autoimage.rb:35 +#: src/clients/inst_autoimage.rb:35 msgid "Retrieving image file..." msgstr "이미지 파일 검색 중..." -#: src/clients/inst_autoimage.rb:36 +#: src/clients/inst_autoimage.rb:36 msgid "Installing image file..." msgstr "이미지 파일 설치 중..." -#: src/clients/inst_autoimage.rb:40 +#: src/clients/inst_autoimage.rb:40 msgid "Installing image into system..." msgstr "시스템에 이미지 설치 중..." -#. if (!AutoinstImage::Get(AutoinstSoftware::ft_module, Installation::destdir )) -#. { -#. Report::Error(_("Error while retrieving image.")); -#. return `abort; -#. } -#: src/clients/inst_autoimage.rb:58 +#. if (!AutoinstImage::Get(AutoinstSoftware::ft_module, Installation::destdir )) +#. { +#. Report::Error(_("Error while retrieving image.")); +#. return `abort; +#. } +#: src/clients/inst_autoimage.rb:58 msgid "" "fetching image-script failed:\n" "%1" @@ -380,7 +364,7 @@ "이미지 스크립트 가져오기 실패:\n" "%1" -#: src/clients/inst_autoimage.rb:67 +#: src/clients/inst_autoimage.rb:67 msgid "" "running image-script failed:\n" "%1" @@ -388,23 +372,23 @@ "이미지 스크립트 실행 실패:\n" "%1" -#. encoding: utf-8 -#. File: clients/inst_autoinit.ycp -#. Package: Auto-installation -#. Summary: Parses XML Profile for automatic installation -#. Authors: Anas Nashif -#. -#. $Id$ -#. -#. encoding: utf-8 -#. File: clients/autoinst_post.ycp -#. Package: Auto-installation -#. Author: Anas Nashif -#. Summary: This module finishes auto-installation and configures -#. the system as described in the profile file. -#. -#. $Id$ -#: src/clients/inst_autoinit.rb:38 src/clients/inst_autopost.rb:48 +#. encoding: utf-8 +#. File: clients/inst_autoinit.ycp +#. Package: Auto-installation +#. Summary: Parses XML Profile for automatic installation +#. Authors: Anas Nashif +#. +#. $Id$ +#. +#. encoding: utf-8 +#. File: clients/autoinst_post.ycp +#. Package: Auto-installation +#. Author: Anas Nashif +#. Summary: This module finishes auto-installation and configures +#. the system as described in the profile file. +#. +#. $Id$ +#: src/clients/inst_autoinit.rb:38 src/clients/inst_autopost.rb:48 msgid "" "<p>\n" "Please wait while the system is prepared for autoinstallation.</p>\n" @@ -412,203 +396,197 @@ "<p>\n" "시스템이 자동설치를 위해 준비하는 동안 기다려 주십시요.</p>\n" -#: src/clients/inst_autoinit.rb:42 +#: src/clients/inst_autoinit.rb:42 msgid "Probe hardware" msgstr "하드웨어 검사" -#: src/clients/inst_autoinit.rb:43 +#: src/clients/inst_autoinit.rb:43 msgid "Retrieve & Read Control File" msgstr "갱신 & 제어파일 읽기" -#: src/clients/inst_autoinit.rb:44 +#: src/clients/inst_autoinit.rb:44 msgid "Parse control file" msgstr "제어파일 분석" -#. Checking profile for unsupported sections. -#: src/clients/inst_autoinit.rb:45 src/clients/inst_autoinit.rb:199 +#. Checking profile for unsupported sections. +#: src/clients/inst_autoinit.rb:45 src/clients/inst_autoinit.rb:199 msgid "Initial Configuration" msgstr "초기 구성" -#: src/clients/inst_autoinit.rb:50 src/clients/inst_autopost.rb:66 +#: src/clients/inst_autoinit.rb:50 src/clients/inst_autopost.rb:66 msgid "Preparing System for Automatic Installation" msgstr "자동 설치를 위해서 시스템을 준비하는 중입니다" -#. progress bar length -#: src/clients/inst_autoinit.rb:58 +#. progress bar length +#: src/clients/inst_autoinit.rb:58 msgid "Preprobing stage" msgstr "사전 검사 단계" -#: src/clients/inst_autoinit.rb:69 +#: src/clients/inst_autoinit.rb:69 msgid "Probing hardware..." msgstr "하드웨어 검사 중..." -#. TRANSLATORS: Error message, %s is replaced by newline-separated -#. list of unsupported sections of the profile -#. Do not translate words in brackets -#: src/clients/inst_autoinit.rb:128 -msgid "" -"These sections of AutoYaST profile are not supported anymore:<br><br>" -"%s<br><br>Please, use, e.g., <scripts/> or <files/> to change " -"the configuration." -msgstr "" -"다음 AutoYaST 프로파일 섹션은 더 이상 지원되지 않습니다.<br><br>%s<br><br>구" -"성을 변경하려면 <scripts/> 또는 <files/> 등을 사용하십시오." +#. TRANSLATORS: Error message, %s is replaced by newline-separated +#. list of unsupported sections of the profile +#. Do not translate words in brackets +#: src/clients/inst_autoinit.rb:128 +msgid "These sections of AutoYaST profile are not supported anymore:<br><br>%s<br><br>Please, use, e.g., <scripts/> or <files/> to change the configuration." +msgstr "다음 AutoYaST 프로파일 섹션은 더 이상 지원되지 않습니다.<br><br>%s<br><br>구성을 변경하려면 <scripts/> 또는 <files/> 등을 사용하십시오." -#. Set reporting behaviour to default, changed later if required -#: src/clients/inst_autoinit.rb:179 +#. Set reporting behaviour to default, changed later if required +#: src/clients/inst_autoinit.rb:179 msgid "Parsing control file" msgstr "제어파일 분석중" -#: src/clients/inst_autopost.rb:51 +#: src/clients/inst_autopost.rb:51 msgid "Install required packages" msgstr "요구된 패키지들 설치" -#. progress bar length -#: src/clients/inst_autopost.rb:74 +#. progress bar length +#: src/clients/inst_autopost.rb:74 msgid "Checking for required packages..." msgstr "필요한 패키지 확인 중..." -#. Add all found packages -#: src/clients/inst_autopost.rb:214 +#. Add all found packages +#: src/clients/inst_autopost.rb:214 msgid "Adding found packages..." msgstr "발견한 패키지 추가 중..." -#. Finish -#: src/clients/inst_autopost.rb:230 +#. Finish +#: src/clients/inst_autopost.rb:230 msgid "Checking for packages required for %1..." msgstr "%1에 필요한 패키지 확인 중..." -#. encoding: utf-8 -#. File: clients/inst_autosetup.ycp -#. Package: Auto-installation -#. Summary: Setup and prepare system for auto-installation -#. Authors: Anas Nashif -#. Uwe Gansert -#. -#. $Id$ -#. encoding: utf-8 -#. File: clients/inst_autosetup.ycp -#. Package: Auto-installation -#. Summary: Setup and prepare system for auto-installation -#. Authors: Anas Nashif -#. Uwe Gansert -#. -#. $Id: inst_autosetup.ycp 61521 2010-03-29 09:10:07Z ug $ -#: src/clients/inst_autosetup.rb:51 src/clients/inst_autosetup_upgrade.rb:43 +#. encoding: utf-8 +#. File: clients/inst_autosetup.ycp +#. Package: Auto-installation +#. Summary: Setup and prepare system for auto-installation +#. Authors: Anas Nashif +#. Uwe Gansert +#. +#. $Id$ +#. encoding: utf-8 +#. File: clients/inst_autosetup.ycp +#. Package: Auto-installation +#. Summary: Setup and prepare system for auto-installation +#. Authors: Anas Nashif +#. Uwe Gansert +#. +#. $Id: inst_autosetup.ycp 61521 2010-03-29 09:10:07Z ug $ +#: src/clients/inst_autosetup.rb:51 src/clients/inst_autosetup_upgrade.rb:43 msgid "<P>Please wait while the system is prepared for autoinstallation.</P>" msgstr "<P>자동 설치를 위해 시스템을 준비하는 동안 잠시 기다려 주십시오.</P>" -#: src/clients/inst_autosetup.rb:55 src/clients/inst_autosetup_upgrade.rb:48 +#: src/clients/inst_autosetup.rb:55 src/clients/inst_autosetup_upgrade.rb:48 msgid "Execute pre-install user scripts" msgstr "선행 사용자 스크립트 실행" -#: src/clients/inst_autosetup.rb:56 src/clients/inst_autosetup_upgrade.rb:47 +#: src/clients/inst_autosetup.rb:56 src/clients/inst_autosetup_upgrade.rb:47 msgid "Configure General Settings " msgstr "일반 설정 구성(&C)" -#: src/clients/inst_autosetup.rb:57 src/clients/inst_autosetup_upgrade.rb:49 +#: src/clients/inst_autosetup.rb:57 src/clients/inst_autosetup_upgrade.rb:49 msgid "Set up language" msgstr "언어 설정" -#: src/clients/inst_autosetup.rb:58 +#: src/clients/inst_autosetup.rb:58 msgid "Create partition plans" msgstr "파티션 생성" -#: src/clients/inst_autosetup.rb:59 src/clients/inst_autosetup_upgrade.rb:52 +#: src/clients/inst_autosetup.rb:59 src/clients/inst_autosetup_upgrade.rb:52 msgid "Configure Bootloader" msgstr "부트 로더 구성" -#: src/clients/inst_autosetup.rb:60 src/clients/inst_autosetup_upgrade.rb:50 +#: src/clients/inst_autosetup.rb:60 src/clients/inst_autosetup_upgrade.rb:50 msgid "Registration" msgstr "등록" -#: src/clients/inst_autosetup.rb:61 src/clients/inst_autosetup_upgrade.rb:51 +#: src/clients/inst_autosetup.rb:61 src/clients/inst_autosetup_upgrade.rb:51 msgid "Configure Software selections" msgstr "소프트웨어 선택" -#: src/clients/inst_autosetup.rb:62 +#: src/clients/inst_autosetup.rb:62 msgid "Configure Systemd Default Target" msgstr "Systemd 기본 대상 구성" -#: src/clients/inst_autosetup.rb:63 +#: src/clients/inst_autosetup.rb:63 msgid "Configure users and groups" msgstr "사용자 및 그룹 구성" -#: src/clients/inst_autosetup.rb:64 +#: src/clients/inst_autosetup.rb:64 msgid "Import SSH keys/settings" msgstr "SSH 키/설정 임포트" -#: src/clients/inst_autosetup.rb:65 +#: src/clients/inst_autosetup.rb:65 msgid "Confirm License" msgstr "라이센스 확인" -#: src/clients/inst_autosetup.rb:69 src/clients/inst_autosetup_upgrade.rb:57 +#: src/clients/inst_autosetup.rb:69 src/clients/inst_autosetup_upgrade.rb:57 msgid "Executing pre-install user scripts..." msgstr "선행 사용자 스크립트 실행중..." -#: src/clients/inst_autosetup.rb:70 src/clients/inst_autosetup_upgrade.rb:56 +#: src/clients/inst_autosetup.rb:70 src/clients/inst_autosetup_upgrade.rb:56 msgid "Configuring general settings..." msgstr "일반 설정 구성 중..." -#: src/clients/inst_autosetup.rb:71 src/clients/inst_autosetup_upgrade.rb:58 +#: src/clients/inst_autosetup.rb:71 src/clients/inst_autosetup_upgrade.rb:58 msgid "Setting up language..." msgstr "언어를 설정하는 중입니다." -#: src/clients/inst_autosetup.rb:72 +#: src/clients/inst_autosetup.rb:72 msgid "Creating partition plans..." msgstr "파티션 생성 중..." -#: src/clients/inst_autosetup.rb:73 src/clients/inst_autosetup_upgrade.rb:61 +#: src/clients/inst_autosetup.rb:73 src/clients/inst_autosetup_upgrade.rb:61 msgid "Configuring Bootloader..." msgstr "부트 로더 구성 중..." -#: src/clients/inst_autosetup.rb:74 src/clients/inst_autosetup_upgrade.rb:59 +#: src/clients/inst_autosetup.rb:74 src/clients/inst_autosetup_upgrade.rb:59 msgid "Registering the system..." msgstr "시스템을 등록하는 중입니다..." -#: src/clients/inst_autosetup.rb:75 src/clients/inst_autosetup_upgrade.rb:60 +#: src/clients/inst_autosetup.rb:75 src/clients/inst_autosetup_upgrade.rb:60 msgid "Configuring Software selections..." msgstr "소프트웨어 선택 구성 중..." -#: src/clients/inst_autosetup.rb:76 +#: src/clients/inst_autosetup.rb:76 msgid "Configuring Systemd Default Target..." msgstr "Systemd 기본 대상을 구성하는 중입니다." -#: src/clients/inst_autosetup.rb:77 +#: src/clients/inst_autosetup.rb:77 msgid "Importing users and groups configuration..." msgstr "사용자 및 그룹 구성을 임포트하는 중..." -#: src/clients/inst_autosetup.rb:78 +#: src/clients/inst_autosetup.rb:78 msgid "Importing SSH keys/settings..." msgstr "SSH 키/설정 임포트 중..." -#: src/clients/inst_autosetup.rb:79 +#: src/clients/inst_autosetup.rb:79 msgid "Confirming License..." msgstr "라이센스 확인 중..." -#: src/clients/inst_autosetup.rb:83 src/clients/inst_autosetup_upgrade.rb:65 +#: src/clients/inst_autosetup.rb:83 src/clients/inst_autosetup_upgrade.rb:65 msgid "Preparing System for Automated Installation" msgstr "자동설치를 위해서 시스템 준비중..." -#. Second stage of installation will not be called but a -#. network configuration is available. So this will be written -#. while the general inst_finish process at the end of the -#. first stage. But for the installation workflow the linuxrc -#. network settings will be taken. (bnc#944942) -#: src/clients/inst_autosetup.rb:185 +#. Second stage of installation will not be called but a +#. network configuration is available. So this will be written +#. while the general inst_finish process at the end of the +#. first stage. But for the installation workflow the linuxrc +#. network settings will be taken. (bnc#944942) +#: src/clients/inst_autosetup.rb:185 msgid "Handling Add-On Products..." msgstr "추가 기능 제품을 처리하는 중입니다." -#. Set it in the Language module. -#. -#. Set it in the Language module. -#: src/clients/inst_autosetup.rb:210 -#: src/clients/inst_autosetup_upgrade.rb:145 +#. Set it in the Language module. +#. +#. Set it in the Language module. +#: src/clients/inst_autosetup.rb:210 src/clients/inst_autosetup_upgrade.rb:145 msgid "Configuring language..." msgstr "언어 구성 중..." -#. Yes, do not set Storage testsuite here as we want really GUI with proposal -#: src/clients/inst_autosetup.rb:298 +#. Yes, do not set Storage testsuite here as we want really GUI with proposal +#: src/clients/inst_autosetup.rb:298 msgid "" "Error while configuring partitions.\n" "Try again.\n" @@ -616,9 +594,9 @@ "파티션을 구성하는 동안 오류가 발생했습니다.\n" "다시 시도하십시오.\n" -#. Adding selections (defined in PackageAI) to libzypp and solving -#. package dependencies. -#: src/clients/inst_autosetup.rb:361 +#. Adding selections (defined in PackageAI) to libzypp and solving +#. package dependencies. +#: src/clients/inst_autosetup.rb:361 msgid "" "Error while configuring software selections.\n" "Try again.\n" @@ -626,66 +604,65 @@ "소프트웨어 선택 구성 중 오류가 발생했습니다.\n" "다시 시도해 주십시오.\n" -#. ReportingDialog() -#. @return sumbol -#: src/clients/report_auto.rb:99 +#. ReportingDialog() +#. @return sumbol +#: src/clients/report_auto.rb:99 msgid "Messages" msgstr "메시지" -#: src/clients/report_auto.rb:105 +#: src/clients/report_auto.rb:105 msgid "Sho&w messages" msgstr "메시지 보기(&W)" -#: src/clients/report_auto.rb:113 +#: src/clients/report_auto.rb:113 msgid "Lo&g messages" msgstr "로그 메시지(&G)" -#: src/clients/report_auto.rb:124 +#: src/clients/report_auto.rb:124 msgid "&Time-out (in sec.)" msgstr "시간초과(in sec.)(&T)" -#: src/clients/report_auto.rb:136 +#: src/clients/report_auto.rb:136 msgid "Warnings" msgstr "경고" -#: src/clients/report_auto.rb:142 +#: src/clients/report_auto.rb:142 msgid "Sh&ow warnings" msgstr "경고 보기(&O)" -#: src/clients/report_auto.rb:150 +#: src/clients/report_auto.rb:150 msgid "Log wa&rnings" msgstr "경고 로그(&R)" -#: src/clients/report_auto.rb:161 +#: src/clients/report_auto.rb:161 msgid "Time-out (in s&ec.)" msgstr "시간 초과(초)(&E)" -#: src/clients/report_auto.rb:173 +#: src/clients/report_auto.rb:173 msgid "Errors" msgstr "오류" -#: src/clients/report_auto.rb:179 +#: src/clients/report_auto.rb:179 msgid "Show error&s" msgstr "오류 보기(&S)" -#: src/clients/report_auto.rb:187 +#: src/clients/report_auto.rb:187 msgid "&Log errors" msgstr "오류 로그(&L)" -#: src/clients/report_auto.rb:198 +#: src/clients/report_auto.rb:198 msgid "Time-o&ut (in sec.)" msgstr "시간초과(in sec.)(&U)" -#: src/clients/report_auto.rb:213 +#: src/clients/report_auto.rb:213 msgid "" -"<p>Depending on your experience, you can skip, log, and show (with time-" -"out)\n" +"<p>Depending on your experience, you can skip, log, and show (with time-out)\n" "installation messages.</p> \n" msgstr "" "<p>로그를 보는 것을 생략 하거나, 설치 메시지를 보는 것은\n" "여러분의 경험에 달려 있습니다.</p>\n" -#: src/clients/report_auto.rb:219 +#: src/clients/report_auto.rb:219 msgid "" "<p>It is recommended to show all <b>messages</b> with time-out.\n" "Warnings can be skipped in some places, but should not be ignored.</p>\n" @@ -693,180 +670,171 @@ "<p>시간초과에 관한 <b>메시지</b> 보는 것을 권장합니다. 경고는 몇몇 곳에서\n" "생략할수 있지만, 하지만 무시 할수는 없습니다.</p>\n" -#: src/clients/report_auto.rb:226 +#: src/clients/report_auto.rb:226 msgid "Messages and Logging" msgstr "메시지와 로깅" -#. Select packages -#. @return [Symbol] -#: src/clients/software_auto.rb:88 +#. Select packages +#. @return [Symbol] +#: src/clients/software_auto.rb:88 msgid "Software Selection" msgstr "소프트웨어 선택" -#: src/clients/software_auto.rb:89 +#: src/clients/software_auto.rb:89 msgid "" "<p>\n" -"Select one of the following <b>base</b> selections and click <i>Detailed<i> " -"to add\n" +"Select one of the following <b>base</b> selections and click <i>Detailed<i> to add\n" "more <b>add-on</b> selections and packages.\n" "</p>\n" msgstr "" "<p>\n" -"다음의 <b>기본사항</b> 중에 선택하고 더 많은 <b>추가 기능</b> 선택들과 패키지" -"들\n" +"다음의 <b>기본사항</b> 중에 선택하고 더 많은 <b>추가 기능</b> 선택들과 패키지들\n" "추가하기 위해서 <i>세부사항</i>을 클릭 하십시오.\n" "</p>\n" -#. AutoinstSoftware::pmInit(); -#. string mainRepo = "http://10.10.0.162/SLES11/DVD1/"; -#. string mainRepo = "ftp://10.10.0.100/install/SLP/openSUSE-11.2/x86_64/DVD1/"; -#: src/clients/software_auto.rb:121 +#. AutoinstSoftware::pmInit(); +#. string mainRepo = "http://10.10.0.162/SLES11/DVD1/"; +#. string mainRepo = "ftp://10.10.0.100/install/SLP/openSUSE-11.2/x86_64/DVD1/"; +#: src/clients/software_auto.rb:121 msgid "Location of the installation source (like http://myhost/11.3/DVD1/)" msgstr "설치 소스의 위치(예: http://myhost/11.3/DVD1/)" -#: src/clients/software_auto.rb:129 -msgid "" -"The inst-source of this system (you can't create images if you choose this)" +#: src/clients/software_auto.rb:129 +msgid "The inst-source of this system (you can't create images if you choose this)" msgstr "이 시스템의 설치 소스(이 옵션을 선택하는 경우 이미지를 생성할 수 없음)" -#: src/clients/software_auto.rb:165 +#: src/clients/software_auto.rb:165 msgid "using that installation source failed" msgstr "해당 설치 소스 사용에 실패했습니다." -#: src/clients/software_auto.rb:190 +#: src/clients/software_auto.rb:190 msgid "Reading package database..." msgstr "패키지 데이타베이스 읽고있는 중..." -#. is result copy of part? -#: src/include/autoinstall/AdvancedPartitionDialog.rb:59 +#. is result copy of part? +#: src/include/autoinstall/AdvancedPartitionDialog.rb:59 msgid "" "<p><b>Mount in /etc/fstab By:</b>\n" "\tNormally, a file system to mount is identified in /etc/fstab\n" -"\tby the device name. This identification can be changed so the file system " -"to mount\n" -"\tis found by searching for a UUID or a volume label. Not all file systems " -"can be\n" -"\tmounted by UUID or a volume label. If an option is disabled, it is not " -"possible.\n" +"\tby the device name. This identification can be changed so the file system to mount\n" +"\tis found by searching for a UUID or a volume label. Not all file systems can be\n" +"\tmounted by UUID or a volume label. If an option is disabled, it is not possible.\n" "\t" msgstr "" "<p><b>/etc/fstab에서 탑재 방식:</b>\n" "\t일반적으로 탑재할 파일 시스템은 /etc/fstab에서 장치 이름별로\n" "\t식별됩니다. UUID 또는 볼륨 레이블을 검색하여 탑재할 파일 시스템을\n" "\t찾을 수 있도록 이러한 ID를 변경할 수 있습니다. UUID 또는 볼륨 레이블별로\n" -"\t탑재할 수 없는 파일 시스템도 있습니다. 이 옵션이 선택되지 않은 경우에는 사" -"용할 수 없습니다.\n" +"\t탑재할 수 없는 파일 시스템도 있습니다. 이 옵션이 선택되지 않은 경우에는 사용할 수 없습니다.\n" "\t" -#. help text, richtext format -#: src/include/autoinstall/AdvancedPartitionDialog.rb:71 +#. help text, richtext format +#: src/include/autoinstall/AdvancedPartitionDialog.rb:71 msgid "" "<p><b>Volume Label:</b>\n" -"\t The name entered in this field is used as the volume label. This usually " -"makes sense only \n" +"\t The name entered in this field is used as the volume label. This usually makes sense only \n" "\t when you activate the option for mounting by volume label.\n" "\t A volume label cannot contain the / character or spaces.\n" "\t " msgstr "" "<p><b>볼륨 레이블:</b>\n" -"\t 이 필드에 입력한 이름이 볼륨 레이블로 사용됩니다. 일반적으로 이 기능은 볼" -"륨\n" +"\t 이 필드에 입력한 이름이 볼륨 레이블로 사용됩니다. 일반적으로 이 기능은 볼륨\n" "\t 레이블별로 탑재하는 옵션을 선택한 경우에만 해당됩니다.\n" "\t 볼륨 레이블에는 / 문자나 공백을 사용할 수 없습니다.\n" "\t " -#: src/include/autoinstall/AdvancedPartitionDialog.rb:82 -#: src/include/autoinstall/AdvancedPartitionDialog.rb:92 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:82 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:92 msgid "Encryption" msgstr "암호화" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:86 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:86 msgid "Encryption key" msgstr "암호화 키" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:93 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:93 msgid "Encryption is not available for physical volumes" msgstr "물리적 볼륨에는 암호화를 사용할 수 없습니다." -#. `HWeight(30, `RichText(`opt(`hstretch),helpText)), -#: src/include/autoinstall/AdvancedPartitionDialog.rb:103 +#. `HWeight(30, `RichText(`opt(`hstretch),helpText)), +#: src/include/autoinstall/AdvancedPartitionDialog.rb:103 msgid "Advanced Partition Settings" msgstr "고급 파티션 설정" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:110 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:110 msgid "Fstab options" msgstr "Fstab 옵션" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:112 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:112 msgid "Mount by" msgstr "탑재 방식" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:118 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:118 msgid "Device name" msgstr "장치 이름" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:119 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:119 msgid "Device id" msgstr "장치 ID" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:120 -#: src/include/autoinstall/AdvancedPartitionDialog.rb:134 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:120 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:134 msgid "Volume label" msgstr "볼륨 레이블" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:125 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:125 msgid "Device path" msgstr "장치 경로" -#: src/include/autoinstall/AdvancedPartitionDialog.rb:126 +#: src/include/autoinstall/AdvancedPartitionDialog.rb:126 msgid "UUID" msgstr "UUID" -#. INTERNAL STUFF -#. local copy of current device the user wants to -#. edit using this dialog -#: src/include/autoinstall/DriveDialog.rb:39 +#. INTERNAL STUFF +#. local copy of current device the user wants to +#. edit using this dialog +#: src/include/autoinstall/DriveDialog.rb:39 msgid "Edit Drive" msgstr "드라이브 편집" -#. GENERAL DIALOG IFACE -#: src/include/autoinstall/DriveDialog.rb:169 +#. GENERAL DIALOG IFACE +#: src/include/autoinstall/DriveDialog.rb:169 msgid "D&evice" msgstr "장치(&E)" -#: src/include/autoinstall/DriveDialog.rb:180 +#: src/include/autoinstall/DriveDialog.rb:180 msgid "&Intialize drive" msgstr "드라이브 초기화(&I)" -#. initially selected -#: src/include/autoinstall/DriveDialog.rb:185 +#. initially selected +#: src/include/autoinstall/DriveDialog.rb:185 msgid "Re&use" msgstr "다시 사용(&U)" -#: src/include/autoinstall/DriveDialog.rb:190 -#: src/include/autoinstall/script_dialogs.rb:188 +#: src/include/autoinstall/DriveDialog.rb:190 +#: src/include/autoinstall/script_dialogs.rb:188 msgid "&Type" msgstr "타입(&T)" -#. `ComboBox( `id(`vgType), _("Type"), toItemList(volgroupTypes)), -#: src/include/autoinstall/DriveDialog.rb:196 -#: src/include/autoinstall/PartitionDialog.rb:518 -#: src/include/autoinstall/VolgroupDialog.rb:139 +#. `ComboBox( `id(`vgType), _("Type"), toItemList(volgroupTypes)), +#: src/include/autoinstall/DriveDialog.rb:196 +#: src/include/autoinstall/PartitionDialog.rb:518 +#: src/include/autoinstall/VolgroupDialog.rb:139 msgid "Apply" msgstr "적용" -#. determines if this partition is to be created on a VG -#: src/include/autoinstall/PartitionDialog.rb:94 +#. determines if this partition is to be created on a VG +#: src/include/autoinstall/PartitionDialog.rb:94 msgid "<none>" msgstr "<없음>" -#. LV -#: src/include/autoinstall/PartitionDialog.rb:135 +#. LV +#: src/include/autoinstall/PartitionDialog.rb:135 msgid "Provide a logical volume name." msgstr "논리적 볼륨 이름을 제공하십시오." -#. MB, GB -> M, B -#: src/include/autoinstall/PartitionDialog.rb:197 +#. MB, GB -> M, B +#: src/include/autoinstall/PartitionDialog.rb:197 msgid "" "You selected to create the partition, but you did not select a valid file\n" "system. Select a valid filesystem to continue.\n" @@ -874,136 +842,132 @@ "파티션을 생성하도록 선택했지만 유효한 파일 시스템을\n" "선택하지 않았습니다. 계속하려면 유효한 파일 시스템을 선택하십시오.\n" -#. We don't use the return value of the check, because we -#. currently can't stop the dialog switch from happening, so we -#. issue possible errors as warnings, and store anyway... should -#. be fixed. -#: src/include/autoinstall/PartitionDialog.rb:392 +#. We don't use the return value of the check, because we +#. currently can't stop the dialog switch from happening, so we +#. issue possible errors as warnings, and store anyway... should +#. be fixed. +#: src/include/autoinstall/PartitionDialog.rb:392 msgid "Store unsaved changes to partition?" msgstr "저장하지 않은 변경사항을 파티션에 저장하시겠습니까?" -#: src/include/autoinstall/PartitionDialog.rb:419 +#: src/include/autoinstall/PartitionDialog.rb:419 msgid "Volgroup" msgstr "Volgroup" -#: src/include/autoinstall/PartitionDialog.rb:423 +#: src/include/autoinstall/PartitionDialog.rb:423 msgid "Logical volume name" msgstr "논리적 볼륨 이름" -#: src/include/autoinstall/PartitionDialog.rb:426 +#: src/include/autoinstall/PartitionDialog.rb:426 msgid "Edit partition" msgstr "파티션 편집" -#: src/include/autoinstall/PartitionDialog.rb:436 +#: src/include/autoinstall/PartitionDialog.rb:436 msgid "&Mount point" msgstr "탑재 지점(&M)" -#: src/include/autoinstall/PartitionDialog.rb:446 +#: src/include/autoinstall/PartitionDialog.rb:446 msgid "File sys&tem" msgstr "파일 시스템(&T)" -#: src/include/autoinstall/PartitionDialog.rb:453 +#: src/include/autoinstall/PartitionDialog.rb:453 msgid "&Size" msgstr "크기(&S)" -#. HBox -#: src/include/autoinstall/PartitionDialog.rb:471 +#. HBox +#: src/include/autoinstall/PartitionDialog.rb:471 msgid "Partiti&on number" msgstr "파티션 번호(&O)" -#. VBox -#: src/include/autoinstall/PartitionDialog.rb:482 +#. VBox +#: src/include/autoinstall/PartitionDialog.rb:482 msgid "Reuse e&xisting partition" msgstr "기존 파티션 재사용(&X)" -#: src/include/autoinstall/PartitionDialog.rb:489 +#: src/include/autoinstall/PartitionDialog.rb:489 msgid "Res&ize existing partition" msgstr "기존 파티션 크기 조정(&I)" -#. HBox -#: src/include/autoinstall/PartitionDialog.rb:496 +#. HBox +#: src/include/autoinstall/PartitionDialog.rb:496 msgid "Activate Striping" msgstr "스트라이핑 활성화" -#: src/include/autoinstall/PartitionDialog.rb:500 +#: src/include/autoinstall/PartitionDialog.rb:500 msgid "Number of Stripes" msgstr "스트라이프 수:" -#: src/include/autoinstall/PartitionDialog.rb:508 +#: src/include/autoinstall/PartitionDialog.rb:508 msgid "Stripe size" msgstr "스트라이프 크기" -#. HBox -#: src/include/autoinstall/PartitionDialog.rb:516 +#. HBox +#: src/include/autoinstall/PartitionDialog.rb:516 msgid "Advan&ced" msgstr "고급(&C)" -#. user selected this partition to be part of volgroup -#: src/include/autoinstall/PartitionDialog.rb:592 -msgid "" -"Size \"auto\" is only valid if mount point \"/boot\" or \"swap\" is selected." -msgstr "" -"\"auto\" 크기는 마운트 포인트 \"/boot\" 또는 \"swap\"이 선택된 경우에만 유효" -"합니다." +#. user selected this partition to be part of volgroup +#: src/include/autoinstall/PartitionDialog.rb:592 +msgid "Size \"auto\" is only valid if mount point \"/boot\" or \"swap\" is selected." +msgstr "\"auto\" 크기는 마운트 포인트 \"/boot\" 또는 \"swap\"이 선택된 경우에만 유효합니다." -#: src/include/autoinstall/PartitionDialog.rb:600 +#: src/include/autoinstall/PartitionDialog.rb:600 msgid "Size \"auto\" is invalid for physical volumes." msgstr "물리적 볼륨에 대해 \"자동\" 크기가 잘못되었습니다." -#. Displayed when tree is empty -#: src/include/autoinstall/StorageDialog.rb:34 +#. Displayed when tree is empty +#: src/include/autoinstall/StorageDialog.rb:34 msgid "Nothing selected" msgstr "선택한 항목이 없습니다." -#. Main Partitioning Dialog -#. @return [Symbol] -#: src/include/autoinstall/StorageDialog.rb:175 +#. Main Partitioning Dialog +#. @return [Symbol] +#: src/include/autoinstall/StorageDialog.rb:175 msgid "Partition p&lan" msgstr "파티션 계획(&L)" -#: src/include/autoinstall/StorageDialog.rb:180 +#: src/include/autoinstall/StorageDialog.rb:180 msgid "Add D&rive" msgstr "드라이브 추가(&R)" -#: src/include/autoinstall/StorageDialog.rb:181 +#: src/include/autoinstall/StorageDialog.rb:181 msgid "Add &Partition" msgstr "파티션 추가(&P)" -#: src/include/autoinstall/StorageDialog.rb:186 +#: src/include/autoinstall/StorageDialog.rb:186 msgid "Add &Volume Group" msgstr "볼륨 그룹 추가(&V)" -#: src/include/autoinstall/StorageDialog.rb:187 -#: src/include/autoinstall/classes.rb:66 +#: src/include/autoinstall/StorageDialog.rb:187 +#: src/include/autoinstall/classes.rb:66 msgid "&Delete" msgstr "삭제(&D)" -#. INTERNAL STUFF -#. local copy of current device the user wants to -#. edit using this dialog -#: src/include/autoinstall/VolgroupDialog.rb:33 +#. INTERNAL STUFF +#. local copy of current device the user wants to +#. edit using this dialog +#: src/include/autoinstall/VolgroupDialog.rb:33 msgid "Edit Volume Group" msgstr "볼륨 그룹 편집" -#. GENERAL DIALOG IFACE -#: src/include/autoinstall/VolgroupDialog.rb:112 +#. GENERAL DIALOG IFACE +#: src/include/autoinstall/VolgroupDialog.rb:112 msgid "Store unsaved changes to volume group?" msgstr "저장하지 않은 변경사항을 볼륨 그룹에 저장하시겠습니까?" -#: src/include/autoinstall/VolgroupDialog.rb:136 +#: src/include/autoinstall/VolgroupDialog.rb:136 msgid "Volgroup device name" msgstr "Volgroup 장치 이름" -#. FIXME: why not pass the variable always? -#: src/include/autoinstall/ask.rb:540 +#. FIXME: why not pass the variable always? +#: src/include/autoinstall/ask.rb:540 msgid "A user defined script is running. This may take a while." -msgstr "" -"사용자 정의 스크립트가 실행 중입니다. 약간의 시간이 소요될 수 있습니다." +msgstr "사용자 정의 스크립트가 실행 중입니다. 약간의 시간이 소요될 수 있습니다." -#. Shows a dialog when 'control file' can't be found -#. @param [String] original Original value -#. @return [String] new value -#: src/include/autoinstall/autoinst_dialogs.rb:22 +#. Shows a dialog when 'control file' can't be found +#. @param [String] original Original value +#. @return [String] new value +#: src/include/autoinstall/autoinst_dialogs.rb:22 msgid "" "<p>\n" "A profile for this machine could not be found or retrieved.\n" @@ -1019,35 +983,34 @@ "다시 시도하십시오. 이 오류 때문에\n" "프로파일의 URL만 입력할 수 있으며 디렉토리는 입력할 수 없습니다.\n" "규칙 또는 호스트 이름을 기반으로 하는 제어 파일을 사용 중인 경우에는\n" -"설치 프로세스를 다시 시작하고 해당 제어 파일에 액세스할 수 있는지 확인하십시" -"오.</p>\n" +"설치 프로세스를 다시 시작하고 해당 제어 파일에 액세스할 수 있는지 확인하십시오.</p>\n" -#: src/include/autoinstall/autoinst_dialogs.rb:31 +#: src/include/autoinstall/autoinst_dialogs.rb:31 msgid "System Profile Location" msgstr "시스템 프로파일 위치" -#: src/include/autoinstall/autoinst_dialogs.rb:46 +#: src/include/autoinstall/autoinst_dialogs.rb:46 msgid "&Profile Location:" msgstr "프로파일 위치(&P):" -#. This dialog selects the target disk for the installation. -#. Below this label, all targets are listed that can be used as -#. installation target -#. heading text -#: src/include/autoinstall/autoinst_dialogs.rb:118 +#. This dialog selects the target disk for the installation. +#. Below this label, all targets are listed that can be used as +#. installation target +#. heading text +#: src/include/autoinstall/autoinst_dialogs.rb:118 msgid "Choose a hard disk" msgstr "하드디스크를 선택하십시오." -#: src/include/autoinstall/autoinst_dialogs.rb:125 +#: src/include/autoinstall/autoinst_dialogs.rb:125 msgid "No disks found." msgstr "디스크를 찾을 수 없습니다." -#. There are several hard disks found. Linux is completely installed on -#. one hard disk - this selection is done here -#. "Preparing Hard Disk - Step 1" is the description of the dialog what to -#. do while the following locale is the help description -#. help part 1 of 1 -#: src/include/autoinstall/autoinst_dialogs.rb:133 +#. There are several hard disks found. Linux is completely installed on +#. one hard disk - this selection is done here +#. "Preparing Hard Disk - Step 1" is the description of the dialog what to +#. do while the following locale is the help description +#. help part 1 of 1 +#: src/include/autoinstall/autoinst_dialogs.rb:133 msgid "" "<p>\n" "All hard disks automatically detected on your system\n" @@ -1059,80 +1022,79 @@ "표시됩니다. &product;을(를) 설치할 하드 디스크를 선택하십시오.\n" "</p>" -#. force help text width -#: src/include/autoinstall/autoinst_dialogs.rb:155 +#. force help text width +#: src/include/autoinstall/autoinst_dialogs.rb:155 msgid "Hard Disk Selection" msgstr "하드 디스크 선택" -#. there is a selection from that one option has to be -#. chosen - at the moment no option is chosen -#: src/include/autoinstall/autoinst_dialogs.rb:178 +#. there is a selection from that one option has to be +#. chosen - at the moment no option is chosen +#: src/include/autoinstall/autoinst_dialogs.rb:178 msgid "Select one of the options to continue." msgstr "계속하기 위해 항목중 하나를 선택해 주세요." -#. class_dialog_contents() -#. @return [Yast::Term] -#: src/include/autoinstall/classes.rb:56 +#. class_dialog_contents() +#. @return [Yast::Term] +#: src/include/autoinstall/classes.rb:56 msgid "Class Name" msgstr "클래스 이름" -#: src/include/autoinstall/classes.rb:56 +#: src/include/autoinstall/classes.rb:56 msgid "Order" msgstr "순서" -#: src/include/autoinstall/classes.rb:56 +#: src/include/autoinstall/classes.rb:56 msgid "Configurations" msgstr "설정" -#: src/include/autoinstall/classes.rb:61 +#: src/include/autoinstall/classes.rb:61 msgid "Class Description" msgstr "클래스 설명" -#: src/include/autoinstall/classes.rb:64 +#: src/include/autoinstall/classes.rb:64 msgid "Ne&w" msgstr "새로 만들기(&W)" -#: src/include/autoinstall/classes.rb:65 -#: src/include/autoinstall/conftree.rb:175 +#: src/include/autoinstall/classes.rb:65 +#: src/include/autoinstall/conftree.rb:175 msgid "&Edit" msgstr "편집(&E)" -#. AddEditClasses() -#. Add or Edit a class -#. @param [Symbol] mode -#. @param symbol -#: src/include/autoinstall/classes.rb:102 +#. AddEditClasses() +#. Add or Edit a class +#. @param [Symbol] mode +#. @param symbol +#: src/include/autoinstall/classes.rb:102 msgid "Edit or Create Classes" msgstr "클래스 편집 또는 생성" -#: src/include/autoinstall/classes.rb:107 +#: src/include/autoinstall/classes.rb:107 msgid "Na&me" msgstr "이름(&M)" -#: src/include/autoinstall/classes.rb:112 +#: src/include/autoinstall/classes.rb:112 msgid "Or&der:" msgstr "순서(&D)" -#: src/include/autoinstall/classes.rb:121 +#: src/include/autoinstall/classes.rb:121 msgid "Descri&ption:" msgstr "설명(&P)" -#: src/include/autoinstall/classes.rb:139 -#: src/include/autoinstall/classes.rb:145 +#: src/include/autoinstall/classes.rb:139 +#: src/include/autoinstall/classes.rb:145 msgid "That name is already used. Select another name." msgstr "이 이름은 이미 사용되고 있습니다. 다른 이름을 선택해 주십시오." -#. Manage Classes -#: src/include/autoinstall/classes.rb:198 +#. Manage Classes +#: src/include/autoinstall/classes.rb:198 msgid "Classes" msgstr "클래스" -#: src/include/autoinstall/classes.rb:200 +#: src/include/autoinstall/classes.rb:200 msgid "<p>Use this interface to define classes of control files. </p>\n" -msgstr "" -"<p>이 인터페이스를 사용해서 제어파일의 클래스를 정의할 수 있습니다.</p>\n" +msgstr "<p>이 인터페이스를 사용해서 제어파일의 클래스를 정의할 수 있습니다.</p>\n" -#: src/include/autoinstall/classes.rb:206 +#: src/include/autoinstall/classes.rb:206 msgid "" "<p>For example, you can define a class of configurations for\n" "a specific department, group, or site in your company environment.</p>\n" @@ -1140,7 +1102,7 @@ "<p>예를들어, 여러분의 회사환경에서 특정한 부서, 그룹, 또는 사이트를\n" "위한 클래스 설정을 정의할 수 있습니다.</p>\n" -#: src/include/autoinstall/classes.rb:213 +#: src/include/autoinstall/classes.rb:213 msgid "" "<p>The order (priority) defines the hierarchy of a class\n" "and when it is merged when creating a control file.\n" @@ -1150,11 +1112,11 @@ "제어파일이 생성될때 클래스들이 통합됩니다.\n" "</p>\n" -#: src/include/autoinstall/classes.rb:243 +#: src/include/autoinstall/classes.rb:243 msgid "No Description" msgstr "설명없음" -#: src/include/autoinstall/classes.rb:255 +#: src/include/autoinstall/classes.rb:255 msgid "" "Select at least one class\n" "to edit.\n" @@ -1162,7 +1124,7 @@ "적어도 하나의 수정할 클래스를\n" "선택하십시오.\n" -#: src/include/autoinstall/classes.rb:262 +#: src/include/autoinstall/classes.rb:262 msgid "" "Select at least one class\n" "to delete.\n" @@ -1170,8 +1132,8 @@ "적어도 하나의 삭제할 클래스를\n" "선택하십시오.\n" -#. The merge operation -#: src/include/autoinstall/classes.rb:372 +#. The merge operation +#: src/include/autoinstall/classes.rb:372 msgid "" "Merge failed:\n" " %1" @@ -1179,34 +1141,34 @@ "통합 실패:\n" " %1" -#. Merge Dialog -#. @return [Symbol] -#: src/include/autoinstall/classes.rb:418 +#. Merge Dialog +#. @return [Symbol] +#: src/include/autoinstall/classes.rb:418 msgid "Merge Classes" msgstr "클래스 통합" -#: src/include/autoinstall/classes.rb:427 -#: src/include/autoinstall/classes.rb:592 +#: src/include/autoinstall/classes.rb:427 +#: src/include/autoinstall/classes.rb:592 msgid "None" msgstr "없음" -#: src/include/autoinstall/classes.rb:454 +#: src/include/autoinstall/classes.rb:454 msgid "No control files defined" msgstr "제어파일을 정의하지 않음" -#: src/include/autoinstall/classes.rb:469 +#: src/include/autoinstall/classes.rb:469 msgid "&Merge with Empty Control File" msgstr "텅빈 제어파일과 통합(&M)" -#: src/include/autoinstall/classes.rb:476 +#: src/include/autoinstall/classes.rb:476 msgid "Merge with &Currently-Loaded Control File" msgstr "이미 적재된 제어파일을 가지고 통합(&C)" -#: src/include/autoinstall/classes.rb:481 +#: src/include/autoinstall/classes.rb:481 msgid "Merge Cla&sses" msgstr "클래스 통합(&S)" -#: src/include/autoinstall/classes.rb:487 +#: src/include/autoinstall/classes.rb:487 msgid "" "<p>If you have defined and created <b>\n" "classes</b>, you will be able to merge them using this interface to create\n" @@ -1216,10 +1178,9 @@ msgstr "" "<p>만일 여러분이 <b>클래스</b>를 정의하고\n" "생성을 했으면, 여러분은 여기에서 새로운 <i>프로파일</i>을 생성해서 클래스를\n" -"통합할 수 있습니다. 새로운 프로파일은 클래스 생성시 설정한 중요도에 따라 모" -"든 클래스의 정보를 저장합니다.</p>\n" +"통합할 수 있습니다. 새로운 프로파일은 클래스 생성시 설정한 중요도에 따라 모든 클래스의 정보를 저장합니다.</p>\n" -#: src/include/autoinstall/classes.rb:497 +#: src/include/autoinstall/classes.rb:497 msgid "" "<P>To merge the classes, an <b>XSLT</b>\n" "script is used.</P>\n" @@ -1227,7 +1188,7 @@ "<p>클래스를 통합하기 위해서,<b>XSLT</b>\n" "스크립트가 사용이 됩니다.</p>\n" -#: src/include/autoinstall/classes.rb:540 +#: src/include/autoinstall/classes.rb:540 msgid "" "Select at least %1 configurations\n" "to perform a merge.\n" @@ -1235,11 +1196,11 @@ "통합하기 위해서 적어도 %1 설정을\n" "선택해 주십시오.\n" -#: src/include/autoinstall/classes.rb:579 +#: src/include/autoinstall/classes.rb:579 msgid "Class Configuration" msgstr "클래스 설정" -#: src/include/autoinstall/classes.rb:580 +#: src/include/autoinstall/classes.rb:580 msgid "" "<p>Choose one or more of the listed classes to which the current control\n" "file should belong.</p>\n" @@ -1247,230 +1208,226 @@ "<p>현재 제어파일에 속해 있는 목록화된 클래스에서 하나 또는 그 이상\n" "선택하십시오.\n" -#: src/include/autoinstall/classes.rb:614 +#: src/include/autoinstall/classes.rb:614 msgid "No profiles in this class" msgstr "이 클래스안에는 프로파일이 없습니다. " -#: src/include/autoinstall/classes.rb:651 +#: src/include/autoinstall/classes.rb:651 msgid "Select at least one class configuration.\n" msgstr "적어도 하나의 클래스 설정을 선택하십시오.\n" -#. encoding: utf-8 -#. File: clients/autoyast.ycp -#. Summary: Main file for client call -#. Authors: Anas Nashif -#. -#. $Id$ -#: src/include/autoinstall/conftree.rb:27 +#. encoding: utf-8 +#. File: clients/autoyast.ycp +#. Summary: Main file for client call +#. Authors: Anas Nashif +#. +#. $Id$ +#: src/include/autoinstall/conftree.rb:27 msgid "Autoinstallation - Configuration" msgstr "자동 설치 - 구성" -#. SAVE -#: src/include/autoinstall/conftree.rb:35 -#: src/include/autoinstall/conftree.rb:697 +#. SAVE +#: src/include/autoinstall/conftree.rb:35 +#: src/include/autoinstall/conftree.rb:697 msgid "Save as..." msgstr "다른 이름으로 저장..." -#: src/include/autoinstall/conftree.rb:42 -#: src/include/autoinstall/conftree.rb:709 +#: src/include/autoinstall/conftree.rb:42 +#: src/include/autoinstall/conftree.rb:709 msgid "File %1 was saved successfully." msgstr "%1 파일이 성공적으로 저장되었습니다." -#. Profile::checkProfile(); -#. Profile::checkProfile(); -#: src/include/autoinstall/conftree.rb:55 -#: src/include/autoinstall/conftree.rb:716 +#. Profile::checkProfile(); +#. Profile::checkProfile(); +#: src/include/autoinstall/conftree.rb:55 +#: src/include/autoinstall/conftree.rb:716 msgid "An error occurred while saving the file." msgstr "파일을 저장하는 중 오류가 발생했습니다." -#. by "SortKey" or alphabetical -#: src/include/autoinstall/conftree.rb:107 +#. by "SortKey" or alphabetical +#: src/include/autoinstall/conftree.rb:107 msgid "Groups" msgstr "그룹" -#. bnc #887115 comment #9: Desktop file is "hidden" and should not be shown at all -#: src/include/autoinstall/conftree.rb:154 +#. bnc #887115 comment #9: Desktop file is "hidden" and should not be shown at all +#: src/include/autoinstall/conftree.rb:154 msgid "No modules available" msgstr "사용 가능한 모듈 없음" -#: src/include/autoinstall/conftree.rb:157 +#: src/include/autoinstall/conftree.rb:157 msgid "Modules" msgstr "모듈" -#. Creates an `HBox containing the buttons to be displayed below the summary column -#. -#. @return The `HBox widget. -#: src/include/autoinstall/conftree.rb:170 +#. Creates an `HBox containing the buttons to be displayed below the summary column +#. +#. @return The `HBox widget. +#: src/include/autoinstall/conftree.rb:170 msgid "&Clone" msgstr "복제(&C)" -#: src/include/autoinstall/conftree.rb:171 +#: src/include/autoinstall/conftree.rb:171 msgid "&Apply to System" msgstr "시스템에 적용(&A)" -#: src/include/autoinstall/conftree.rb:176 +#: src/include/autoinstall/conftree.rb:176 msgid "Clea&r" msgstr "지우기(&R)" -#. Creates a `VBox containg the summary of the specified module and the action buttons below. -#. -#. @param [String] module_name The module to summarize. -#. @return The `VBox widget. -#: src/include/autoinstall/conftree.rb:195 +#. Creates a `VBox containg the summary of the specified module and the action buttons below. +#. +#. @param [String] module_name The module to summarize. +#. @return The `VBox widget. +#: src/include/autoinstall/conftree.rb:195 msgid "Details" msgstr "자세히" -#. Configure module -#. @param [String] resource Module/Resource to configure -#. @return [Object] -#: src/include/autoinstall/conftree.rb:357 +#. Configure module +#. @param [String] resource Module/Resource to configure +#. @return [Object] +#: src/include/autoinstall/conftree.rb:357 msgid "The module returned invalid data." msgstr "모듈이 잘못된 데이터를 반환했습니다." -#. Sets the menus in the wizard. -#. @return [void] -#: src/include/autoinstall/conftree.rb:380 +#. Sets the menus in the wizard. +#. @return [void] +#: src/include/autoinstall/conftree.rb:380 msgid "&File" msgstr "파일(&F)" -#: src/include/autoinstall/conftree.rb:381 +#: src/include/autoinstall/conftree.rb:381 msgid "&View" msgstr "보기(&V)" -#: src/include/autoinstall/conftree.rb:382 +#: src/include/autoinstall/conftree.rb:382 msgid "&Classes" msgstr "클래스(&C)" -#: src/include/autoinstall/conftree.rb:383 +#: src/include/autoinstall/conftree.rb:383 msgid "&Tools" msgstr "도구들(&T)" -#: src/include/autoinstall/conftree.rb:385 +#: src/include/autoinstall/conftree.rb:385 msgid "&New" msgstr "새로 만들기(&N)" -#: src/include/autoinstall/conftree.rb:386 +#: src/include/autoinstall/conftree.rb:386 msgid "&Open" msgstr "열기(&O)" -#: src/include/autoinstall/conftree.rb:387 +#: src/include/autoinstall/conftree.rb:387 msgid "&Save" msgstr "저장(&S)" -#: src/include/autoinstall/conftree.rb:391 +#: src/include/autoinstall/conftree.rb:391 msgid "Save &As" msgstr "다른 이름으로 저장(&A)" -#: src/include/autoinstall/conftree.rb:394 +#: src/include/autoinstall/conftree.rb:394 msgid "Im&port" msgstr "불러오기(&P)" -#: src/include/autoinstall/conftree.rb:398 +#: src/include/autoinstall/conftree.rb:398 msgid "Import &Kickstart File" msgstr "킥스타트 파일 불러오기(&K)" -#: src/include/autoinstall/conftree.rb:404 +#: src/include/autoinstall/conftree.rb:404 msgid "Settin&gs" msgstr "설정(&G)" -#: src/include/autoinstall/conftree.rb:411 +#: src/include/autoinstall/conftree.rb:411 msgid "Change to Decrypted" msgstr "암호화 해제로 변경" -#: src/include/autoinstall/conftree.rb:412 +#: src/include/autoinstall/conftree.rb:412 msgid "Change to Encrypted" msgstr "암호화로 변경" -#: src/include/autoinstall/conftree.rb:418 +#: src/include/autoinstall/conftree.rb:418 msgid "Apply Profile to this System" msgstr "이 시스템에 프로파일 적용" -#: src/include/autoinstall/conftree.rb:421 +#: src/include/autoinstall/conftree.rb:421 msgid "E&xit" msgstr "종료(&X)" -#: src/include/autoinstall/conftree.rb:426 +#: src/include/autoinstall/conftree.rb:426 msgid "Configu&ration Tree" msgstr "설정트리(&R)" -#: src/include/autoinstall/conftree.rb:433 +#: src/include/autoinstall/conftree.rb:433 msgid "So&urce" msgstr "소스(&U)" -#: src/include/autoinstall/conftree.rb:440 +#: src/include/autoinstall/conftree.rb:440 msgid "Cla&sses" msgstr "클래스(&S)" -#: src/include/autoinstall/conftree.rb:446 +#: src/include/autoinstall/conftree.rb:446 msgid "Me&rge Classes" msgstr "클래스 통합(&R)" -#: src/include/autoinstall/conftree.rb:453 +#: src/include/autoinstall/conftree.rb:453 msgid "Create Reference Pro&file" msgstr "참조 프로파일 생성(&F)" -#: src/include/autoinstall/conftree.rb:459 +#: src/include/autoinstall/conftree.rb:459 msgid "Check &Validity of Profile" msgstr "프로파일 유효성 검사(&V)" -#. Show Source -#: src/include/autoinstall/conftree.rb:495 +#. Show Source +#: src/include/autoinstall/conftree.rb:495 msgid "Source" msgstr "소스" -#. Some configuration modules removes/exchange the menu bar. -#. So we have to reset. (bnc#872711) -#: src/include/autoinstall/conftree.rb:569 -msgid "" -"Do you really want to apply the settings of the module '%1' to your current " -"system?" +#. Some configuration modules removes/exchange the menu bar. +#. So we have to reset. (bnc#872711) +#: src/include/autoinstall/conftree.rb:569 +msgid "Do you really want to apply the settings of the module '%1' to your current system?" msgstr "'%1' 모듈의 설정을 현재 시스템에 적용하시겠습니까?" -#. opening/parsing the xml file failed -#: src/include/autoinstall/conftree.rb:644 +#. opening/parsing the xml file failed +#: src/include/autoinstall/conftree.rb:644 msgid "An error occurred while opening/parsing the XML file." msgstr "XML 파일을 여는/구문 분석하는 중 오류가 발생했습니다." -#. NEW -#: src/include/autoinstall/conftree.rb:734 +#. NEW +#: src/include/autoinstall/conftree.rb:734 msgid "Available Modules" msgstr "사용가능한 모듈들" -#. FIXME: sucks sucks sucks sucks sucks -#: src/include/autoinstall/conftree.rb:749 -msgid "" -"Do you really want to apply the settings of the profile to your current " -"system?" +#. FIXME: sucks sucks sucks sucks sucks +#: src/include/autoinstall/conftree.rb:749 +msgid "Do you really want to apply the settings of the profile to your current system?" msgstr "프로파일의 설정을 현재 시스템에 적용하시겠습니까?" -#. EXIT -#: src/include/autoinstall/conftree.rb:790 +#. EXIT +#: src/include/autoinstall/conftree.rb:790 msgid "Control file changed." msgstr "제어파일 변경됨" -#: src/include/autoinstall/conftree.rb:791 +#: src/include/autoinstall/conftree.rb:791 msgid "Save the changes to %1?" msgstr "%1에 변경사항을 저장하겠습니까?" -#. Preferences Dialog -#. @return [Symbol] -#: src/include/autoinstall/dialogs.rb:37 +#. Preferences Dialog +#. @return [Symbol] +#: src/include/autoinstall/dialogs.rb:37 msgid "&Profile Repository:" msgstr "프로파일 저장소(&P)" -#: src/include/autoinstall/dialogs.rb:42 +#: src/include/autoinstall/dialogs.rb:42 msgid "&Select Directory" msgstr "디렉토리 선택(&S)" -#: src/include/autoinstall/dialogs.rb:50 +#: src/include/autoinstall/dialogs.rb:50 msgid "&Class directory:" msgstr "클래스 디렉토리(&C):" -#: src/include/autoinstall/dialogs.rb:55 +#: src/include/autoinstall/dialogs.rb:55 msgid "Select &Directory" msgstr "디렉토리 선택(&D)" -#: src/include/autoinstall/dialogs.rb:63 +#: src/include/autoinstall/dialogs.rb:63 msgid "" "<P>\n" "Enter the directory where all <em>control files</em> should be stored in\n" @@ -1480,7 +1437,7 @@ "<b>저장소</b>필드안에 저장되어야만 하는 모든 <em>제어 파일들</em>의\n" "디렉토리를 입력하십시오.</p>" -#: src/include/autoinstall/dialogs.rb:71 +#: src/include/autoinstall/dialogs.rb:71 msgid "" "<P>If you are using the classes feature\n" "of Autoyast, also enter the class directory. This is where\n" @@ -1490,19 +1447,19 @@ "클래스 디렉토리를 입력하십시오. 이곳에 모든\n" "클래스 파일이 저장이 됩니다.</p>\n" -#: src/include/autoinstall/dialogs.rb:78 +#: src/include/autoinstall/dialogs.rb:78 msgid "Settings" msgstr "설정" -#: src/include/autoinstall/dialogs.rb:94 -#: src/include/autoinstall/dialogs.rb:101 +#: src/include/autoinstall/dialogs.rb:94 +#: src/include/autoinstall/dialogs.rb:101 msgid "Select Directory" msgstr "디렉토리 선택" -#. Return a message about invalid file names -#. @param - -#. @return message -#: src/include/autoinstall/dialogs.rb:153 +#. Return a message about invalid file names +#. @param - +#. @return message +#: src/include/autoinstall/dialogs.rb:153 msgid "" "Invalid file name.\n" "Names can only contain letters, numbers, and underscore,\n" @@ -1513,61 +1470,61 @@ "이름에는 문자와 숫자, 밑줄(_)만 포함할 수 있습니다.\n" "문자로 시작해야 하며 127 문자 이내여야 합니다.\n" -#. title -#: src/include/autoinstall/dialogs.rb:221 +#. title +#: src/include/autoinstall/dialogs.rb:221 msgid "Create a Reference Control File" msgstr "참조 제어파일 생성" -#: src/include/autoinstall/dialogs.rb:224 +#: src/include/autoinstall/dialogs.rb:224 msgid "Select Additional Resources:" msgstr "추가적인 리소스들 선택:" -#: src/include/autoinstall/dialogs.rb:247 +#: src/include/autoinstall/dialogs.rb:247 msgid "Collecting system data..." msgstr "시스템 데이터 수집 중..." -#: src/include/autoinstall/dialogs.rb:248 +#: src/include/autoinstall/dialogs.rb:248 msgid "This may take a while..." msgstr "약간의 시간이 소요될 수 있습니다." -#: src/include/autoinstall/dialogs.rb:267 +#: src/include/autoinstall/dialogs.rb:267 msgid "Importing Kickstart file..." msgstr "킥스타트 파일을 임포트하는 중..." -#: src/include/autoinstall/dialogs.rb:270 -#: src/include/autoinstall/general_dialogs.rb:1094 -#: src/include/autoinstall/wizards.rb:53 +#: src/include/autoinstall/dialogs.rb:270 +#: src/include/autoinstall/general_dialogs.rb:1094 +#: src/include/autoinstall/wizards.rb:53 msgid "Initializing ..." msgstr "초기화중..." -#. progress stage -#: src/include/autoinstall/dialogs.rb:288 +#. progress stage +#: src/include/autoinstall/dialogs.rb:288 msgid "Read Kickstart file" msgstr "킥스타트 파일 읽기" -#: src/include/autoinstall/dialogs.rb:289 +#: src/include/autoinstall/dialogs.rb:289 msgid "Import data" msgstr "데이터 불러오기" -#: src/include/autoinstall/dialogs.rb:292 +#: src/include/autoinstall/dialogs.rb:292 msgid "Reading Kickstart file..." msgstr "킥스타트 파일을 읽는 중..." -#. progress step -#: src/include/autoinstall/dialogs.rb:294 +#. progress step +#: src/include/autoinstall/dialogs.rb:294 msgid "Importing data..." msgstr "데이터를 임포트하는 중..." -#. progress step -#: src/include/autoinstall/dialogs.rb:296 +#. progress step +#: src/include/autoinstall/dialogs.rb:296 msgid "Finished" msgstr "완료됨" -#: src/include/autoinstall/dialogs.rb:307 +#: src/include/autoinstall/dialogs.rb:307 msgid "Select a kickstart file." msgstr "킥스타트 파일을 선택합니다." -#: src/include/autoinstall/dialogs.rb:324 +#: src/include/autoinstall/dialogs.rb:324 msgid "" "Error while loading Kickstart file. Verify the syntax of\n" "file and try again." @@ -1575,128 +1532,127 @@ "킥스타트 파일을 로드하는 동안 오류가 발생했습니다.\n" "파일 구문을 확인하고 다시 시도하십시오." -#. Set resource name, if not using default value -#: src/include/autoinstall/dialogs.rb:348 +#. Set resource name, if not using default value +#: src/include/autoinstall/dialogs.rb:348 msgid "" "Kickstart file was imported.\n" -"Check the imported syntax and make sure the package selection and " -"partitioning\n" +"Check the imported syntax and make sure the package selection and partitioning\n" "were imported correctly." msgstr "" "킥스타트 파일이 임포트되었습니다.\n" "임포트된 구문을 검사하고 패키지 선택 및 파티션 작업이\n" "제대로 임포트되었는지 확인하십시오." -#. Validate Dialog -#. @return [Symbol] -#: src/include/autoinstall/dialogs.rb:378 +#. Validate Dialog +#. @return [Symbol] +#: src/include/autoinstall/dialogs.rb:378 msgid "Check profile validity" msgstr "프로파일 유효성 확인" -#: src/include/autoinstall/dialogs.rb:394 +#: src/include/autoinstall/dialogs.rb:394 msgid "OK" msgstr "확인" -#: src/include/autoinstall/dialogs.rb:395 -#: src/include/autoinstall/script_dialogs.rb:264 +#: src/include/autoinstall/dialogs.rb:395 +#: src/include/autoinstall/script_dialogs.rb:264 msgid "Error" msgstr "에러" -#: src/include/autoinstall/dialogs.rb:396 -#: src/include/autoinstall/script_dialogs.rb:259 +#: src/include/autoinstall/dialogs.rb:396 +#: src/include/autoinstall/script_dialogs.rb:259 msgid "Warning" msgstr "경고" -#. [ -#. _("Checking XML without validation..."), -#. "/usr/bin/xmllint --noout", -#. ], -#. [ -#. _("Checking XML with DTD validation..."), -#. "/usr/bin/xmllint --noout --valid" -#. ], -#. this function is a replacement for this code: -#. list<any> l = [ "key1",0,"key3" ]; -#. m[ l ] = v; -#. @return [Hash] -#: src/include/autoinstall/dialogs.rb:410 src/modules/Profile.rb:815 +#. [ +#. _("Checking XML without validation..."), +#. "/usr/bin/xmllint --noout", +#. ], +#. [ +#. _("Checking XML with DTD validation..."), +#. "/usr/bin/xmllint --noout --valid" +#. ], +#. this function is a replacement for this code: +#. list<any> l = [ "key1",0,"key3" ]; +#. m[ l ] = v; +#. @return [Hash] +#: src/include/autoinstall/dialogs.rb:410 src/modules/Profile.rb:815 msgid "Checking XML with RNG validation..." msgstr "RNG 유효성 검사와 함께 XML을 확인하는 중..." -#. section wise validation -#: src/include/autoinstall/dialogs.rb:432 +#. section wise validation +#: src/include/autoinstall/dialogs.rb:432 msgid "Section %1: " msgstr "섹션 %1:" -#. jing validation -- validates complete xml profile -#: src/include/autoinstall/dialogs.rb:459 src/modules/Profile.rb:827 +#. jing validation -- validates complete xml profile +#: src/include/autoinstall/dialogs.rb:459 src/modules/Profile.rb:827 msgid "Checking XML with RNC validation..." msgstr "RNC 유효성 검사와 함께 XML을 확인하는 중..." -#. the autoyast interface can check if the profile is logical or if important stuff is missing -#. the missing stuff is under the Label "Logic" -#: src/include/autoinstall/dialogs.rb:496 +#. the autoyast interface can check if the profile is logical or if important stuff is missing +#. the missing stuff is under the Label "Logic" +#: src/include/autoinstall/dialogs.rb:496 msgid "Logic" msgstr "논리" -#. the autoyast config frontend can check if a root password is configured -#. and can warn the user if it is missing -#: src/include/autoinstall/dialogs.rb:502 +#. the autoyast config frontend can check if a root password is configured +#. and can warn the user if it is missing +#: src/include/autoinstall/dialogs.rb:502 msgid "No root password configured" msgstr "구성된 루트 비밀번호가 없음" -#. Main dialog -#. @return [Symbol] -#: src/include/autoinstall/general_dialogs.rb:61 +#. Main dialog +#. @return [Symbol] +#: src/include/autoinstall/general_dialogs.rb:61 msgid "Con&firm installation?" msgstr "설치 확인(&F)" -#: src/include/autoinstall/general_dialogs.rb:65 +#: src/include/autoinstall/general_dialogs.rb:65 msgid "AutoYaST Second Stage" msgstr "AutoYaST 제2 단계" -#: src/include/autoinstall/general_dialogs.rb:72 +#: src/include/autoinstall/general_dialogs.rb:72 msgid "Turn Off the Machine after the First Stage" msgstr "첫 번째 단계 이후 장치를 끔" -#: src/include/autoinstall/general_dialogs.rb:79 +#: src/include/autoinstall/general_dialogs.rb:79 msgid "Turn off the Machine after the Second Stage" msgstr "두 번째 단계 후 컴퓨터 끄기" -#: src/include/autoinstall/general_dialogs.rb:86 +#: src/include/autoinstall/general_dialogs.rb:86 msgid "Reboot the Machine after the Second Stage" msgstr "두 번째 단계 이후 시스템 재부팅" -#: src/include/autoinstall/general_dialogs.rb:90 -#: src/modules/AutoinstGeneral.rb:128 +#: src/include/autoinstall/general_dialogs.rb:90 +#: src/modules/AutoinstGeneral.rb:128 msgid "Signature Handling" msgstr "서명 처리" -#: src/include/autoinstall/general_dialogs.rb:94 +#: src/include/autoinstall/general_dialogs.rb:94 msgid "Accept &Unsigned Files" msgstr "서명되지 않은 파일 승인(&U)" -#: src/include/autoinstall/general_dialogs.rb:101 +#: src/include/autoinstall/general_dialogs.rb:101 msgid "Accept Files without a &Checksum" msgstr "체크섬 없는 파일 승인(&C)" -#: src/include/autoinstall/general_dialogs.rb:108 +#: src/include/autoinstall/general_dialogs.rb:108 msgid "Accept Failed &Verifications" msgstr "실패한 확인 승인(&V)" -#: src/include/autoinstall/general_dialogs.rb:115 +#: src/include/autoinstall/general_dialogs.rb:115 msgid "Accept Unknown &GPG Keys" msgstr "알 수 없는 GPG 키 승인(&G)" -#: src/include/autoinstall/general_dialogs.rb:122 +#: src/include/autoinstall/general_dialogs.rb:122 msgid "Accept Non Trusted GPG Keys" msgstr "신뢰하지 않는 GPG 키 승인" -#: src/include/autoinstall/general_dialogs.rb:129 +#: src/include/autoinstall/general_dialogs.rb:129 msgid "Import &New GPG Keys" msgstr "새 GPG 키 가져오기(&N)" -#: src/include/autoinstall/general_dialogs.rb:136 +#: src/include/autoinstall/general_dialogs.rb:136 msgid "" "<P>\n" "The options in this dialog control the behavior of the AutoYaST during\n" @@ -1708,39 +1664,35 @@ "동작을 제어합니다.\n" "</P>\n" -#: src/include/autoinstall/general_dialogs.rb:144 +#: src/include/autoinstall/general_dialogs.rb:144 msgid "" "<P>\n" "The installation confirmation option is selected by default\n" "to avoid unwanted installation. It stops the system\n" "during installation and shows a summary of requested operations in the\n" -"usual proposal screen. Uncheck this option to install automatically without " -"interruption.\n" +"usual proposal screen. Uncheck this option to install automatically without interruption.\n" "</P>\n" msgstr "" "<P>\n" "원하지 않는 설치를 방지하기 위해 설치 확인 옵션이\n" "기본으로 선택됩니다. 이 옵션을 선택하면\n" "설치 중에 시스템이 중지되고 일반적인 제안 화면에\n" -"요청된 작업 요약이 표시됩니다. 중단하지 않고 자동으로 설치하려면 이 옵션의 선" -"택을 취소하십시오.\n" +"요청된 작업 요약이 표시됩니다. 중단하지 않고 자동으로 설치하려면 이 옵션의 선택을 취소하십시오.\n" "</P>\n" -#: src/include/autoinstall/general_dialogs.rb:155 +#: src/include/autoinstall/general_dialogs.rb:155 msgid "" "<P>\n" -"If you turn off the second stage of AutoYaST, the installation continues in " -"manual mode\n" +"If you turn off the second stage of AutoYaST, the installation continues in manual mode\n" "after the first reboot (after package installation).\n" "</P>\n" msgstr "" "<P>\n" -"AutoYaST의 제2 단계를 끄면, 첫 번째 재부팅 이후(패키지 설치 이후) 수동 모드에" -"서\n" +"AutoYaST의 제2 단계를 끄면, 첫 번째 재부팅 이후(패키지 설치 이후) 수동 모드에서\n" " 설치가 계속됩니다.\n" " </P>\n" -#: src/include/autoinstall/general_dialogs.rb:165 +#: src/include/autoinstall/general_dialogs.rb:165 msgid "" "<P>\n" "For signature handling, read the AutoYaST documentation.\n" @@ -1750,147 +1702,144 @@ "서명 처리를 위해 AutoYaST 설명서를 읽어 보시기 바랍니다.\n" " </P>\n" -#: src/include/autoinstall/general_dialogs.rb:172 +#: src/include/autoinstall/general_dialogs.rb:172 msgid "Other Options" msgstr "기타 옵션" -#: src/include/autoinstall/general_dialogs.rb:275 +#: src/include/autoinstall/general_dialogs.rb:275 msgid "Frametitle" msgstr "Frametitle" -#: src/include/autoinstall/general_dialogs.rb:280 -#: src/include/autoinstall/general_dialogs.rb:683 +#: src/include/autoinstall/general_dialogs.rb:280 +#: src/include/autoinstall/general_dialogs.rb:683 msgid "Question" msgstr "질문" -#: src/include/autoinstall/general_dialogs.rb:285 +#: src/include/autoinstall/general_dialogs.rb:285 msgid "Timeout (zero means no timeout)" msgstr "시간 제한(0은 제한 없음)" -#: src/include/autoinstall/general_dialogs.rb:325 +#: src/include/autoinstall/general_dialogs.rb:325 msgid "Password" msgstr "비밀번호" -#: src/include/autoinstall/general_dialogs.rb:333 +#: src/include/autoinstall/general_dialogs.rb:333 msgid "Pathlist for answers (multiple paths are separated by space)" msgstr "응답 경로 목록(여러 경로가 공백으로 구분됨)" -#: src/include/autoinstall/general_dialogs.rb:341 +#: src/include/autoinstall/general_dialogs.rb:341 msgid "Store answer in this file" msgstr "이 파일에 답변 저장" -#: src/include/autoinstall/general_dialogs.rb:344 +#: src/include/autoinstall/general_dialogs.rb:344 msgid "Selection List for type 'Symbol'" msgstr "'Symbol' 유형에 대한 목록 선택" -#: src/include/autoinstall/general_dialogs.rb:349 -#: src/include/autoinstall/general_dialogs.rb:360 +#: src/include/autoinstall/general_dialogs.rb:349 +#: src/include/autoinstall/general_dialogs.rb:360 msgid "Label" msgstr "레이블" -#: src/include/autoinstall/general_dialogs.rb:349 -#: src/include/autoinstall/general_dialogs.rb:361 +#: src/include/autoinstall/general_dialogs.rb:349 +#: src/include/autoinstall/general_dialogs.rb:361 msgid "Value" msgstr "값" -#: src/include/autoinstall/general_dialogs.rb:374 -#: src/include/autoinstall/general_dialogs.rb:713 +#: src/include/autoinstall/general_dialogs.rb:374 +#: src/include/autoinstall/general_dialogs.rb:713 msgid "<P></P>" msgstr "<P></P>" -#: src/include/autoinstall/general_dialogs.rb:635 +#: src/include/autoinstall/general_dialogs.rb:635 msgid "1st Stage" msgstr "첫 번째 단계" -#: src/include/autoinstall/general_dialogs.rb:641 +#: src/include/autoinstall/general_dialogs.rb:641 msgid "2nd Stage" msgstr "두 번째 단계" -#: src/include/autoinstall/general_dialogs.rb:645 +#: src/include/autoinstall/general_dialogs.rb:645 msgid "Dialog Title" msgstr "대화 상자 제목" -#: src/include/autoinstall/general_dialogs.rb:646 +#: src/include/autoinstall/general_dialogs.rb:646 msgid "Helptext" msgstr "Helptext" -#: src/include/autoinstall/general_dialogs.rb:651 +#: src/include/autoinstall/general_dialogs.rb:651 msgid "Add to Dialog List" msgstr "대화 상자 목록에 추가" -#: src/include/autoinstall/general_dialogs.rb:656 +#: src/include/autoinstall/general_dialogs.rb:656 msgid "Apply changes to dialog" msgstr "대화 상자에 변경사항 적용" -#: src/include/autoinstall/general_dialogs.rb:665 +#: src/include/autoinstall/general_dialogs.rb:665 msgid "Title" msgstr "제목" -#: src/include/autoinstall/general_dialogs.rb:673 +#: src/include/autoinstall/general_dialogs.rb:673 msgid "Delete Dialog" msgstr "대화 상자 삭제" -#: src/include/autoinstall/general_dialogs.rb:675 +#: src/include/autoinstall/general_dialogs.rb:675 msgid "Dialog up" msgstr "대화 상자 위" -#: src/include/autoinstall/general_dialogs.rb:679 +#: src/include/autoinstall/general_dialogs.rb:679 msgid "Dialog down" msgstr "대화 상자 아래" -#: src/include/autoinstall/general_dialogs.rb:682 +#: src/include/autoinstall/general_dialogs.rb:682 msgid "Questions in dialog" msgstr "대화 상자의 질문" -#: src/include/autoinstall/general_dialogs.rb:688 +#: src/include/autoinstall/general_dialogs.rb:688 msgid "Add Question" msgstr "질문 추가" -#: src/include/autoinstall/general_dialogs.rb:693 -#: src/include/autoinstall/general_dialogs.rb:985 +#: src/include/autoinstall/general_dialogs.rb:693 +#: src/include/autoinstall/general_dialogs.rb:985 msgid "Edit Question" msgstr "질문 편집" -#: src/include/autoinstall/general_dialogs.rb:698 +#: src/include/autoinstall/general_dialogs.rb:698 msgid "Delete Question" msgstr "질문 삭제" -#: src/include/autoinstall/general_dialogs.rb:703 +#: src/include/autoinstall/general_dialogs.rb:703 msgid "Question up" msgstr "질문 위" -#: src/include/autoinstall/general_dialogs.rb:708 +#: src/include/autoinstall/general_dialogs.rb:708 msgid "Question down" msgstr "질문 아래" -#: src/include/autoinstall/general_dialogs.rb:714 +#: src/include/autoinstall/general_dialogs.rb:714 msgid "ASK Options" msgstr "ASK 옵션" -#. Translators: dialog caption -#: src/include/autoinstall/general_dialogs.rb:1093 +#. Translators: dialog caption +#: src/include/autoinstall/general_dialogs.rb:1093 msgid "General Settings" msgstr "일반 설정" -#. All helps are here -#: src/include/autoinstall/helps.rb:16 +#. All helps are here +#: src/include/autoinstall/helps.rb:16 msgid "<p><b><big>Profile Validation</big></b><br>" msgstr "<p><b><big>프로파일 유효성 검사</big></b><br>" -#: src/include/autoinstall/helps.rb:17 +#: src/include/autoinstall/helps.rb:17 msgid "" -"<p>This tool uses <em>xmllint</em> to validate the profile against the DTD " -"and\n" +"<p>This tool uses <em>xmllint</em> to validate the profile against the DTD and\n" "it checks for missing data. Some missing data might be intentional and any\n" "reported errors can be ignored, for example, when creating classes.</p>\n" msgstr "" -"<p>이 도구는 <em>xmllint</em>를 사용하여 DTD에 대해 프로파일의 유효성을 확인" -"하고\n" -"누락된 데이터가 있는지 확인합니다. 누락된 데이터 중 일부는 미리 계획된 것이므" -"로\n" +"<p>이 도구는 <em>xmllint</em>를 사용하여 DTD에 대해 프로파일의 유효성을 확인하고\n" +"누락된 데이터가 있는지 확인합니다. 누락된 데이터 중 일부는 미리 계획된 것이므로\n" "보고된 오류를 무시할 수 있습니다(예: 클래스를 만드는 경우).</p>\n" -#: src/include/autoinstall/helps.rb:22 +#: src/include/autoinstall/helps.rb:22 msgid "" "<p>Load a profile first. Otherwise an empty file\n" "is validated.</p>\n" @@ -1898,11 +1847,11 @@ "<p>먼저 프로파일을 로드하십시오. 그렇게 하지 않으면 빈 파일에 대해\n" "유효성 검사가 수행됩니다.</p>\n" -#: src/include/autoinstall/helps.rb:25 +#: src/include/autoinstall/helps.rb:25 msgid "<p><b><big>Importing Kickstart Files</big></b><br>" msgstr "<p><b><big>킥스타트 파일 임포트</big></b><br>" -#: src/include/autoinstall/helps.rb:26 +#: src/include/autoinstall/helps.rb:26 msgid "" "<p>To import a Kickstart file, enter the path to the configuration file. \n" "The imported data is loaded into the configuration management system \n" @@ -1912,35 +1861,33 @@ "임포트한 데이터는 구성 관리 시스템으로 로드되어 SUSE와 함께 \n" " 사용할 수 있는 더 많은 구성 옵션을 추가합니다.</p>\n" -#: src/include/autoinstall/helps.rb:31 +#: src/include/autoinstall/helps.rb:31 msgid "" "<p>This tool creates a reference profile by reading\n" "information from this system. Select the resources to read from this system\n" -"in addition to the default resources, like partitioning and package " -"selections.</p>\n" +"in addition to the default resources, like partitioning and package selections.</p>\n" msgstr "" "<p>이 도구는 시스템의 정보를 읽어들여서 새로운 프로파일을 생성합니다.\n" "이 시스템에서 읽어들인 리소스와 파티션 작업, 패키지 선택과 같은\n" "추가적인 리소스들을 선택하십시오.</p>\n" -#: src/include/autoinstall/helps.rb:36 +#: src/include/autoinstall/helps.rb:36 msgid "<p> Partition your hard disks... </p>" msgstr "<p> 하드디스크 파티션중... </p>" -#: src/include/autoinstall/helps.rb:37 +#: src/include/autoinstall/helps.rb:37 msgid "" -"<p>The table to the right shows the partitions to create on the target " -"system.\n" +"<p>The table to the right shows the partitions to create on the target system.\n" "</p>\n" msgstr "" "<p>오른쪽 테이블에는 대상 시스템에 만들 파티션이 표시됩니다.\n" "</p>\n" -#: src/include/autoinstall/helps.rb:40 +#: src/include/autoinstall/helps.rb:40 msgid "<p><b>Hard disks</b> are designated like this </p>" msgstr "<p><b>하드 디스크</b>는 이렇게 설정되어 있습니다.</p>" -#: src/include/autoinstall/helps.rb:41 +#: src/include/autoinstall/helps.rb:41 msgid "" "<tt>/dev/hda </tt>1st EIDE disk\n" "<tt>/dev/hdb </tt>2nd EIDE disk\n" @@ -1950,15 +1897,15 @@ "<tt>/dev/hdb </tt>두번쩨 EIDE 디스크\n" "<tt>/dev/hdc </tt>세번째 EIDE 디스크" -#: src/include/autoinstall/helps.rb:46 +#: src/include/autoinstall/helps.rb:46 msgid "<p>etc.</p>" msgstr "<p>기타</p>" -#: src/include/autoinstall/helps.rb:47 +#: src/include/autoinstall/helps.rb:47 msgid "<p>- or - </p>" msgstr "<p>- 혹은 - </p>" -#: src/include/autoinstall/helps.rb:48 +#: src/include/autoinstall/helps.rb:48 msgid "" "<p><tt>/dev/sda </tt>1st SCSI disk\n" "<tt>/dev/sdb </tt>2nd SCSI disk\n" @@ -1968,18 +1915,17 @@ "<tt>/dev/sdb </tt>두번째 SCSI 디스크\n" "<tt>/dev/sdc </tt>세번째 SCSI 디스크</p>" -#: src/include/autoinstall/helps.rb:53 +#: src/include/autoinstall/helps.rb:53 msgid "" "If no partitions are defined and the specified drive is also\n" -"the drive where the root partition should reside, the following partitions " -"are\n" +"the drive where the root partition should reside, the following partitions are\n" "created automatically:" msgstr "" "만약 어떤 파티션도 정의되지 않고 지정된 드라이브가 또한\n" "루트 파티션이 작성될 드라이브라면,\n" "다음 파티션들은 자동적으로 생성됩니다.:" -#: src/include/autoinstall/helps.rb:58 +#: src/include/autoinstall/helps.rb:58 msgid "" " <tt>/boot</tt>, <tt>swap</tt>, and a root partition <tt>/</tt>.\n" "Sizes are calculated automatically.\n" @@ -1987,24 +1933,15 @@ " <tt>/boot</tt>, <tt>스왑</tt>, 루트 파티션 <tt>/</tt>.\n" "크기는 자동으로 계산됩니다.\n" -#: src/include/autoinstall/helps.rb:61 +#: src/include/autoinstall/helps.rb:61 msgid "<p><b>Advanced Options</b></p>" msgstr "<p><b>고급 옵션</b></p>" -#: src/include/autoinstall/helps.rb:62 -msgid "" -"By default, AutoYaST will create an extended partition and adds all new " -"partitions as logical devices. It is possible, however, to instruct AutoYaST " -"to create a certain partition as a primary partition or as extended " -"partition. Additionally, it is possible to specify the size of a partition " -"using sectors rather than size in MBytes." -msgstr "" -"기본적으로 AutoYaST는 확장 파티션을 생성하고 모든 새 파티션을 논리적 장치로 " -"추가합니다. 그러나 AutoYaST에 특정 파티션을 주 파티션이나 확장 파티션으로 생" -"성하도록 지시할 수 있습니다. 또한 크기(MB) 대신 섹터를 사용하여 파티션 크기" -"를 지정할 수 있습니다." +#: src/include/autoinstall/helps.rb:62 +msgid "By default, AutoYaST will create an extended partition and adds all new partitions as logical devices. It is possible, however, to instruct AutoYaST to create a certain partition as a primary partition or as extended partition. Additionally, it is possible to specify the size of a partition using sectors rather than size in MBytes." +msgstr "기본적으로 AutoYaST는 확장 파티션을 생성하고 모든 새 파티션을 논리적 장치로 추가합니다. 그러나 AutoYaST에 특정 파티션을 주 파티션이나 확장 파티션으로 생성하도록 지시할 수 있습니다. 또한 크기(MB) 대신 섹터를 사용하여 파티션 크기를 지정할 수 있습니다." -#: src/include/autoinstall/helps.rb:65 +#: src/include/autoinstall/helps.rb:65 msgid "" "These options and other advanced options cannot be configured using this\n" "interface. Instead, add them manually to the control file.\n" @@ -2012,41 +1949,39 @@ "이 기능과 다른 고급 기능들은 이 인터페이스에서 구성할 수 없습니다.\n" "대신에 제어 파일에서 수동으로 입력해야 합니다.\n" -#: src/include/autoinstall/helps.rb:68 +#: src/include/autoinstall/helps.rb:68 msgid "" "<p>\n" "For LVM and RAID setup, consult the documentation and add the configuration\n" -"to an existing control file. You can only create unformatted LVM and RAID " -"partitions as\n" +"to an existing control file. You can only create unformatted LVM and RAID partitions as\n" "a preparation.\n" "</p>\n" msgstr "" "<p>\n" -"LVM과 RAID설정을 하기 위해서는 문서를 참고하여 존재하는 제어파일에 설정을 추" -"가하십시요.\n" +"LVM과 RAID설정을 하기 위해서는 문서를 참고하여 존재하는 제어파일에 설정을 추가하십시요.\n" "오직 포맷되지 않은 준비된 LVM과 RAID 파티션만을 생성할 수 있습니다.\n" "</p>\n" -#. Script Configuration -#. @return script configuration dialog -#: src/include/autoinstall/script_dialogs.rb:30 +#. Script Configuration +#. @return script configuration dialog +#: src/include/autoinstall/script_dialogs.rb:30 msgid "Available Scripts" msgstr "사용가능한 스크립트" -#: src/include/autoinstall/script_dialogs.rb:34 +#: src/include/autoinstall/script_dialogs.rb:34 msgid "Script Name" msgstr "스크립트 이름" -#: src/include/autoinstall/script_dialogs.rb:34 +#: src/include/autoinstall/script_dialogs.rb:34 msgid "Type" msgstr "타입" -#: src/include/autoinstall/script_dialogs.rb:34 +#: src/include/autoinstall/script_dialogs.rb:34 msgid "Interpreter" msgstr "해석기" -#. help 1/6 -#: src/include/autoinstall/script_dialogs.rb:64 +#. help 1/6 +#: src/include/autoinstall/script_dialogs.rb:64 msgid "" "\n" "<h3>Preinstallation Scripts</h3>\n" @@ -2056,13 +1991,12 @@ "<h3>사전 설치 스크립트</h3>\n" " <P>설치가 시작되기 전에 시스템에서 실행할 명령을 추가합니다. </P>\n" -#. help 2/6 -#: src/include/autoinstall/script_dialogs.rb:72 +#. help 2/6 +#: src/include/autoinstall/script_dialogs.rb:72 msgid "" "\n" "<h3>Postinstallation Scripts</h3>\n" -"<P>You can also add commands to execute on the system after the " -"installation\n" +"<P>You can also add commands to execute on the system after the installation\n" "is completed. These scripts are run outside the chroot environment.\n" "</P>" msgstr "" @@ -2072,16 +2006,15 @@ " 있습니다. 이러한 스크립트는 chroot 환경 외부에서 실행됩니다.\n" " </P>" -#. help 3/6 -#: src/include/autoinstall/script_dialogs.rb:83 +#. help 3/6 +#: src/include/autoinstall/script_dialogs.rb:83 msgid "" "\n" "<H3>Chroot Scripts</H3>\n" "<P>For your postinstallation script to run inside the chroot\n" "environment, choose the <i>chroot scripts</i> options. Those scripts are\n" "run before the system reboots for the first time. By default, the chroot \n" -"scripts are run in the installation system. To access files in the " -"installed \n" +"scripts are run in the installation system. To access files in the installed \n" "system, always use the mount point \"/mnt\" in your scripts.\n" "</P>\n" msgstr "" @@ -2094,13 +2027,12 @@ " 액세스하려면 스크립트에 항상 마운트 포인트 /mnt를 사용하십시오.\n" " </P>\n" -#. help 4/6 -#: src/include/autoinstall/script_dialogs.rb:97 +#. help 4/6 +#: src/include/autoinstall/script_dialogs.rb:97 msgid "" "\n" "<p>It is possible to run chroot scripts in a later stage after\n" -"the boot loader has been configured using the special boolean tag \"chrooted" -"\".\n" +"the boot loader has been configured using the special boolean tag \"chrooted\".\n" "This runs the scripts in the installed system. \n" "</p>\n" msgstr "" @@ -2110,8 +2042,8 @@ " 이렇게 하면 설치된 시스템에서 스크립트가 실행됩니다. \n" " </p>\n" -#. help 5/6 -#: src/include/autoinstall/script_dialogs.rb:108 +#. help 5/6 +#: src/include/autoinstall/script_dialogs.rb:108 msgid "" "\n" "<H3>Init Scripts</H3>\n" @@ -2131,139 +2063,128 @@ "초기화된 이후에 실행됩니다.\n" "</P>\n" -#. help 6/6 -#: src/include/autoinstall/script_dialogs.rb:123 +#. help 6/6 +#: src/include/autoinstall/script_dialogs.rb:123 msgid "" "\n" "<H3>Interpreter:</H3>\n" -"<P>Preinstallation scripts can only be shell scripts. Do not use <i>Perl</i> " -"or \n" +"<P>Preinstallation scripts can only be shell scripts. Do not use <i>Perl</i> or \n" "<i>Python</i> for preinstallation scripts.\n" "</P>\n" msgstr "" "\n" "<H3>해석기:</H3>\n" -" <P>사전 설치 스크립트는 셸 스크립트만 가능합니다. 사전 설치 스크립트로 " -"<i>Perl</i>\n" +" <P>사전 설치 스크립트는 셸 스크립트만 가능합니다. 사전 설치 스크립트로 <i>Perl</i>\n" " 또는 <i>Python</i>은 사용하지 마십시오.\n" " </P>\n" -#: src/include/autoinstall/script_dialogs.rb:133 +#: src/include/autoinstall/script_dialogs.rb:133 msgid "" "\n" "<H3>Network Access:</H3>\n" "<P>While executing postinstallation scripts, the network is disabled and\n" "requires initialization in the scripts to make the network accessible. An\n" -"alternative for postinstallation scripts with network is using init scripts, " -"which\n" -"guarantee a fully configured system when running the scripts. If you did an " -"installation\n" -"over a network, you can use the <b>Network</b> option for the postscript, " -"too.\n" +"alternative for postinstallation scripts with network is using init scripts, which\n" +"guarantee a fully configured system when running the scripts. If you did an installation\n" +"over a network, you can use the <b>Network</b> option for the postscript, too.\n" "</P>\n" msgstr "" "\n" "<H3>네트워크 액세스:</H3>\n" " <P>사후 설치 스크립트 실행 중에는 네트워크가 비활성화되므로 네트워크에\n" " 액세스할 수 있으려면 스크립트에서 네트워크를 초기화해야 합니다. \n" -" 네트워크에서의 사후 설치 스크립트에 대한 대안은 초기 스크립트를 사용하는 것" -"인데,\n" -" 이 경우 스크립트 실행 중 시스템의 완전한 구성이 보장됩니다. 네트워크를 통" -"해\n" -" 설치하는 경우 사후 스크립트에 대해 <b>네트워크</b> 옵션을 사용할 수도 있습니" -"다.\n" +" 네트워크에서의 사후 설치 스크립트에 대한 대안은 초기 스크립트를 사용하는 것인데,\n" +" 이 경우 스크립트 실행 중 시스템의 완전한 구성이 보장됩니다. 네트워크를 통해\n" +" 설치하는 경우 사후 스크립트에 대해 <b>네트워크</b> 옵션을 사용할 수도 있습니다.\n" " </P>\n" -#: src/include/autoinstall/script_dialogs.rb:146 +#: src/include/autoinstall/script_dialogs.rb:146 msgid "" "\n" "<H3>Feedback and Debug:</H3>\n" -"<P>All scripts except the init scripts can show STDOUT+STDERR in a pop-up " -"box as feedback.\n" -"If you turn on debugging, you get more output in the feedback dialog that " -"might help\n" +"<P>All scripts except the init scripts can show STDOUT+STDERR in a pop-up box as feedback.\n" +"If you turn on debugging, you get more output in the feedback dialog that might help\n" "you to debug your script.</P>\n" msgstr "" "\n" "<H3>피드백 및 디버그:</H3>\n" -" <P>초기 스크립트를 제외한 모든 스크립트는 팝업 상자에 피드백으로 STDOUT" -"+STDERR를 보여줄 수 있습니다.\n" +" <P>초기 스크립트를 제외한 모든 스크립트는 팝업 상자에 피드백으로 STDOUT+STDERR를 보여줄 수 있습니다.\n" " 디버깅 기능을 켜두면 스크립트 디버깅에 도움이 되는 더 많은 내용이 피드백\n" " 대화 상자에 출력됩니다.</P>\n" -#: src/include/autoinstall/script_dialogs.rb:155 +#: src/include/autoinstall/script_dialogs.rb:155 msgid "Script Editor" msgstr "스크립트 편집기" -#: src/include/autoinstall/script_dialogs.rb:161 +#: src/include/autoinstall/script_dialogs.rb:161 msgid "&File Name" msgstr "파일 이름(&F)" -#: src/include/autoinstall/script_dialogs.rb:166 +#: src/include/autoinstall/script_dialogs.rb:166 msgid "&Interpreter" msgstr "해석기(&I)" -#: src/include/autoinstall/script_dialogs.rb:170 +#: src/include/autoinstall/script_dialogs.rb:170 msgid "Perl" msgstr "Perl" -#: src/include/autoinstall/script_dialogs.rb:175 +#: src/include/autoinstall/script_dialogs.rb:175 msgid "Shell" msgstr "Shell" -#: src/include/autoinstall/script_dialogs.rb:180 +#: src/include/autoinstall/script_dialogs.rb:180 msgid "Python" msgstr "Python" -#. a checkbox where you can choose if you want to see script-feedback output or not -#: src/include/autoinstall/script_dialogs.rb:220 +#. a checkbox where you can choose if you want to see script-feedback output or not +#: src/include/autoinstall/script_dialogs.rb:220 msgid "&Feedback" msgstr "피드백(&F)" -#. a checkbox where you can choose if you want to see script-debug output or not -#: src/include/autoinstall/script_dialogs.rb:226 +#. a checkbox where you can choose if you want to see script-debug output or not +#: src/include/autoinstall/script_dialogs.rb:226 msgid "&Debug" msgstr "디버그(&D)" -#: src/include/autoinstall/script_dialogs.rb:231 +#: src/include/autoinstall/script_dialogs.rb:231 msgid "&Chrooted" msgstr "Chrooted(&C)" -#. a checkbox where you can choose if you need to have network when the script is running -#: src/include/autoinstall/script_dialogs.rb:237 +#. a checkbox where you can choose if you need to have network when the script is running +#: src/include/autoinstall/script_dialogs.rb:237 msgid "&Network" msgstr "네트워크(&N)" -#. a checkbox where you can choose if you want to see script-feedback output or not -#: src/include/autoinstall/script_dialogs.rb:245 +#. a checkbox where you can choose if you want to see script-feedback output or not +#: src/include/autoinstall/script_dialogs.rb:245 msgid "&Feedback Type" msgstr "피드백 유형(&F)" -#: src/include/autoinstall/script_dialogs.rb:249 +#: src/include/autoinstall/script_dialogs.rb:249 msgid "none" msgstr "none" -#: src/include/autoinstall/script_dialogs.rb:254 +#: src/include/autoinstall/script_dialogs.rb:254 msgid "Message" msgstr "메시지" -#: src/include/autoinstall/script_dialogs.rb:275 +#: src/include/autoinstall/script_dialogs.rb:275 msgid "Text of the notification popup" msgstr "알람 팝업 텍스트" -#: src/include/autoinstall/script_dialogs.rb:283 +#: src/include/autoinstall/script_dialogs.rb:283 msgid "Script Location" msgstr "스크립트 위치" -#: src/include/autoinstall/script_dialogs.rb:291 +#: src/include/autoinstall/script_dialogs.rb:291 msgid "S&cript Source" msgstr "스크립트 소스(&C)" -#: src/include/autoinstall/script_dialogs.rb:298 +#: src/include/autoinstall/script_dialogs.rb:298 msgid "&Load new source" msgstr "새로운 소스를 불러옵니다.(&L)" -#: src/include/autoinstall/script_dialogs.rb:372 +#: src/include/autoinstall/script_dialogs.rb:372 msgid "" "Provide at least the script\n" "name and the location or content of the script.\n" @@ -2271,53 +2192,48 @@ "적어도 스크립트 이름과 스크립트 위치\n" "또는 내용을 제공하십시오.\n" -#. Main dialog -#. @return [Symbol] -#: src/include/autoinstall/script_dialogs.rb:474 +#. Main dialog +#. @return [Symbol] +#: src/include/autoinstall/script_dialogs.rb:474 msgid "" "<p>\n" -"By adding scripts to the autoinstallation process, customize the " -"installation for\n" +"By adding scripts to the autoinstallation process, customize the installation for\n" "your needs and take control in different stages of the installation.</p>\n" msgstr "" "<p>\n" "자동 설치 과정에 스크립트를 추가함으로서, 사용자의 요구와\n" "설치의 다른 단계를 제어하면서 설치를 사용자 정의할 수 있습니다.</p>\n" -#: src/include/autoinstall/script_dialogs.rb:480 +#: src/include/autoinstall/script_dialogs.rb:480 msgid "User Script Management" msgstr "사용자 스크립트 관리" -#: src/include/autoinstall/script_dialogs.rb:500 -#: src/include/autoinstall/script_dialogs.rb:508 +#: src/include/autoinstall/script_dialogs.rb:500 +#: src/include/autoinstall/script_dialogs.rb:508 msgid "Select a script first." msgstr "먼저 스크립트를 선택하십시오." -#. Translators: dialog caption -#: src/include/autoinstall/wizards.rb:52 +#. Translators: dialog caption +#: src/include/autoinstall/wizards.rb:52 msgid "Autoinstall Configuration" msgstr "자동설치 설정" -#. Read rules file -#. @return [void] -#: src/modules/AutoInstallRules.rb:448 +#. Read rules file +#. @return [void] +#: src/modules/AutoInstallRules.rb:448 msgid "Parsing the rules file failed. XML parser reports:\n" msgstr "규칙 파일을 구문 분석하는 데 실패했습니다. XML 파서 보고:\n" -#. Merge Rule results -#. @param [String] result_profile the resulting control file path -#. @return [Boolean] true on success -#. autoyast has read the autoyast configuration file but something went wrong -#: src/modules/AutoInstallRules.rb:905 src/modules/Profile.rb:746 -msgid "" -"The XML parser reported an error while parsing the autoyast profile. The " -"error message is:\n" -msgstr "" -"XML 파서가 autoyast 프로파일을 구문 분석하는 동안 오류를 보고했습니다. 오류 " -"메시지 내용:\n" +#. Merge Rule results +#. @param [String] result_profile the resulting control file path +#. @return [Boolean] true on success +#. autoyast has read the autoyast configuration file but something went wrong +#: src/modules/AutoInstallRules.rb:905 src/modules/Profile.rb:746 +msgid "The XML parser reported an error while parsing the autoyast profile. The error message is:\n" +msgstr "XML 파서가 autoyast 프로파일을 구문 분석하는 동안 오류를 보고했습니다. 오류 메시지 내용:\n" -#. backdoor for merging problems. -#: src/modules/AutoInstallRules.rb:1050 +#. backdoor for merging problems. +#: src/modules/AutoInstallRules.rb:1050 msgid "" "\n" "User-defined classes could not be retrieved. Make sure all classes \n" @@ -2328,23 +2244,22 @@ "\n" "사용자 정의 클래스를 가져올 수 없습니다. 모든 클래스가 \n" "올바로 정의되어 있고 네트워크를 통해 또는 로컬에서 이 시스템에\n" -"사용할 수 있는지 확인하십시오. 클래스를 사용하지 않고 원본 제어 파일을 사용하" -"여 \n" +"사용할 수 있는지 확인하십시오. 클래스를 사용하지 않고 원본 제어 파일을 사용하여 \n" "시스템을 설치할 수 없습니다.\n" -#. The line above needs to be fixed when we have more attributes -#. comment will look like this: "(description=BLA BLA)" -#: src/modules/AutoinstConfig.rb:289 +#. The line above needs to be fixed when we have more attributes +#. comment will look like this: "(description=BLA BLA)" +#: src/modules/AutoinstConfig.rb:289 msgid "Choose Profile" msgstr "프로파일 선택" -#. Nothing returned by SLP query -#: src/modules/AutoinstConfig.rb:312 +#. Nothing returned by SLP query +#: src/modules/AutoinstConfig.rb:312 msgid "No 'autoyast' provider has been found via SLP." msgstr "SLP를 통해 'autoyast' 공급자를 찾을 수 없습니다." -#. There is no profile defined/found anywhere -#: src/modules/AutoinstConfig.rb:357 +#. There is no profile defined/found anywhere +#: src/modules/AutoinstConfig.rb:357 msgid "" "Invalid AutoYaST profile URL\n" "%{url}" @@ -2352,51 +2267,51 @@ "잘못된 AutoYaST 프로파일 URL\n" "%{url}" -#. SetProtocolMessage () -#. @return [void] -#: src/modules/AutoinstConfig.rb:384 +#. SetProtocolMessage () +#. @return [void] +#: src/modules/AutoinstConfig.rb:384 msgid "Retrieving control file from floppy." msgstr "플로피에서 제어파일을 가져오는 중" -#: src/modules/AutoinstConfig.rb:387 +#: src/modules/AutoinstConfig.rb:387 msgid "Retrieving control file (%1) from TFTP server: %2." msgstr "TFTP 서버에서 제어 파일(%1)을 가져오는 중: %2" -#: src/modules/AutoinstConfig.rb:393 +#: src/modules/AutoinstConfig.rb:393 msgid "Retrieving control file (%1) from NFS server: %2." msgstr "NFS 서버에서 제어 파일(%1)을 가져오는 중: %2" -#: src/modules/AutoinstConfig.rb:399 +#: src/modules/AutoinstConfig.rb:399 msgid "Retrieving control file (%1) from HTTP server: %2." msgstr "HTTP 서버에서 제어 파일(%1)을 가져오는 중: %2" -#: src/modules/AutoinstConfig.rb:405 +#: src/modules/AutoinstConfig.rb:405 msgid "Retrieving control file (%1) from FTP server: %2." msgstr "FTP 서버에서 제어 파일(%1)을 가져오는 중: %2" -#: src/modules/AutoinstConfig.rb:411 +#: src/modules/AutoinstConfig.rb:411 msgid "Copying control file from file: %1." msgstr "파일로 부터 제어파일을 복사 하는 중: %1." -#: src/modules/AutoinstConfig.rb:416 +#: src/modules/AutoinstConfig.rb:416 msgid "Copying control file from device: /dev/%1." msgstr "장치로 부터 제어파일을 복사하는 중: /dev/%1." -#: src/modules/AutoinstConfig.rb:420 +#: src/modules/AutoinstConfig.rb:420 msgid "Copying control file from default location." msgstr "기본 위치에서 제어 파일을 복사하는 중입니다." -#: src/modules/AutoinstConfig.rb:422 +#: src/modules/AutoinstConfig.rb:422 msgid "Source unknown." msgstr "알수없는 소스" -#. This probably gets never executed and it only breaks the commandline iface -#. by Mode::test() call which instantiates UI -#. else if (Mode::test () && Mode::normal ()) -#. { -#. local_rules_file = (string)WFM::Args(1); -#. } -#: src/modules/AutoinstConfig.rb:502 +#. This probably gets never executed and it only breaks the commandline iface +#. by Mode::test() call which instantiates UI +#. else if (Mode::test () && Mode::normal ()) +#. { +#. local_rules_file = (string)WFM::Args(1); +#. } +#: src/modules/AutoinstConfig.rb:502 msgid "" "<h3>AutoYaST Configuration Management System</h3>\n" "<p>Almost all resources of the control file can be\n" @@ -2406,231 +2321,225 @@ "<p>구성 관리 시스템을 사용하면 제어 파일의 거의 모든\n" " 리소스를 구성할 수 있습니다.</p>\n" -#: src/modules/AutoinstConfig.rb:507 +#: src/modules/AutoinstConfig.rb:507 msgid "" -"<p>Most of the modules used to create the configuration are identical to " -"those available\n" -"through the YaST Control Center. Instead of configuring this system, the " -"data\n" +"<p>Most of the modules used to create the configuration are identical to those available\n" +"through the YaST Control Center. Instead of configuring this system, the data\n" "entered is collected and exported to the control file that can be used to\n" "install another system using AutoYaST.\n" "</p>\n" msgstr "" -"<p>구성을 만드는 데 사용된 대부분의 모듈은 YaST2 Control Center를 통해 사용" -"할\n" +"<p>구성을 만드는 데 사용된 대부분의 모듈은 YaST2 Control Center를 통해 사용할\n" "수 있는 것과 동일합니다. 이 시스템을 구성하는 대신 입력한 데이터를 모아서\n" "제어 파일로 내보내면 AutoYaST를 사용하여 다른 시스템에\n" "설치하는 데 사용할 수 있습니다.\n" "</p>\n" -#: src/modules/AutoinstConfig.rb:514 +#: src/modules/AutoinstConfig.rb:514 msgid "" "<p>In addition to the existing and familiar modules,\n" -"new interfaces were created for special and complex configurations, " -"including\n" +"new interfaces were created for special and complex configurations, including\n" "partitioning, general options, and software.</p>\n" msgstr "" "<p>기존의 친숙한 모듈 외에도 파티셔닝,\n" "일반 옵션 및 소프트웨어를 비롯한 특수하고 복잡한 구성용으로 작성된 새로운\n" " 인터페이스가 제공됩니다.</p>\n" -#. Construct node name for display in tree. -#. -#. Constructed names are of the form: -#. "<device name> - {drive,volgroup} -#. -#. @param [Hash{String => Object}] drive to create node name for -#. -#. @return the newly created node name -#: src/modules/AutoinstDrive.rb:128 +#. Construct node name for display in tree. +#. +#. Constructed names are of the form: +#. "<device name> - {drive,volgroup} +#. +#. @param [Hash{String => Object}] drive to create node name for +#. +#. @return the newly created node name +#: src/modules/AutoinstDrive.rb:128 msgid " - Drive" msgstr " - 드라이브" -#. volume group -#: src/modules/AutoinstDrive.rb:132 +#. volume group +#: src/modules/AutoinstDrive.rb:132 msgid " - Volume group" msgstr " - 볼륨 그룹 " -#. Settings Summary -#: src/modules/AutoinstFile.rb:46 +#. Settings Summary +#: src/modules/AutoinstFile.rb:46 msgid "Configured Files:" msgstr "구성된 파일:" -#. string language_name = ""; -#. string keyboard_name = ""; -#: src/modules/AutoinstGeneral.rb:92 +#. string language_name = ""; +#. string keyboard_name = ""; +#: src/modules/AutoinstGeneral.rb:92 msgid "Confirm installation?" msgstr "설치 확인?" -#: src/modules/AutoinstGeneral.rb:95 src/modules/AutoinstGeneral.rb:101 -#: src/modules/AutoinstGeneral.rb:110 src/modules/AutoinstGeneral.rb:117 -#: src/modules/AutoinstGeneral.rb:124 +#: src/modules/AutoinstGeneral.rb:95 src/modules/AutoinstGeneral.rb:101 +#: src/modules/AutoinstGeneral.rb:110 src/modules/AutoinstGeneral.rb:117 +#: src/modules/AutoinstGeneral.rb:124 msgid "Yes" msgstr "예" -#: src/modules/AutoinstGeneral.rb:95 src/modules/AutoinstGeneral.rb:101 -#: src/modules/AutoinstGeneral.rb:110 +#: src/modules/AutoinstGeneral.rb:95 src/modules/AutoinstGeneral.rb:101 +#: src/modules/AutoinstGeneral.rb:110 msgid "No" msgstr "아니오" -#: src/modules/AutoinstGeneral.rb:98 +#: src/modules/AutoinstGeneral.rb:98 msgid "Second Stage of AutoYaST" msgstr "AutoYaST의 제2 단계" -#: src/modules/AutoinstGeneral.rb:106 +#: src/modules/AutoinstGeneral.rb:106 msgid "Halting the machine after stage one" msgstr "1단계 이후 컴퓨터 끄기" -#: src/modules/AutoinstGeneral.rb:115 +#: src/modules/AutoinstGeneral.rb:115 msgid "Halting the machine after stage two" msgstr "두 번째 단계 이후 컴퓨터 중지" -#: src/modules/AutoinstGeneral.rb:122 +#: src/modules/AutoinstGeneral.rb:122 msgid "Reboot the machine after stage two" msgstr "두 번째 단계 이후 시스템 재부팅" -#: src/modules/AutoinstGeneral.rb:132 +#: src/modules/AutoinstGeneral.rb:132 msgid "Accepting unsigned files" msgstr "서명되지 않은 파일 승인" -#: src/modules/AutoinstGeneral.rb:133 +#: src/modules/AutoinstGeneral.rb:133 msgid "Not accepting unsigned files" msgstr "서명되지 않은 파일 승인 안 함" -#: src/modules/AutoinstGeneral.rb:142 +#: src/modules/AutoinstGeneral.rb:142 msgid "Accepting files without a checksum" msgstr "체크섬 없는 파일 승인" -#: src/modules/AutoinstGeneral.rb:143 +#: src/modules/AutoinstGeneral.rb:143 msgid "Not accepting files without a checksum" msgstr "체크섬 없는 파일 승인 안 함" -#: src/modules/AutoinstGeneral.rb:152 +#: src/modules/AutoinstGeneral.rb:152 msgid "Accepting failed verifications" msgstr "실패한 확인 승인" -#: src/modules/AutoinstGeneral.rb:153 +#: src/modules/AutoinstGeneral.rb:153 msgid "Not accepting failed verifications" msgstr "실패한 확인 승인 안 함" -#: src/modules/AutoinstGeneral.rb:158 +#: src/modules/AutoinstGeneral.rb:158 msgid "Accepting unknown GPG keys" msgstr "알 수 없는 GPG 키 승인" -#: src/modules/AutoinstGeneral.rb:159 +#: src/modules/AutoinstGeneral.rb:159 msgid "Not accepting unknown GPG Keys" msgstr "알 수 없는 GPG 키 승인 안 함" -#: src/modules/AutoinstGeneral.rb:164 +#: src/modules/AutoinstGeneral.rb:164 msgid "Importing new GPG keys" msgstr "새 GPG 키 가져오기" -#: src/modules/AutoinstGeneral.rb:165 +#: src/modules/AutoinstGeneral.rb:165 msgid "Not importing new GPG Keys" msgstr "새 GPG 키 가져오지 않음" -#. NTP syncing -#: src/modules/AutoinstGeneral.rb:445 +#. NTP syncing +#: src/modules/AutoinstGeneral.rb:445 msgid "Syncing time..." msgstr "시간을 동기화하는 중입니다..." -#. TRANSLATORS: %s is the name of the ntp server -#: src/modules/AutoinstGeneral.rb:447 +#. TRANSLATORS: %s is the name of the ntp server +#: src/modules/AutoinstGeneral.rb:447 msgid "Syncing time with %s." msgstr "%s과(와) 시간을 동기화하는 중입니다." -#: src/modules/AutoinstGeneral.rb:451 +#: src/modules/AutoinstGeneral.rb:451 msgid "Time syncing failed." msgstr "시간 동기화가 실패했습니다." -#: src/modules/AutoinstGeneral.rb:455 +#: src/modules/AutoinstGeneral.rb:455 msgid "Cannot update system time." msgstr "시스템 시간을 업데이트할 수 없습니다." -#. look for VGs to reuse -#: src/modules/AutoinstLVM.rb:113 +#. look for VGs to reuse +#: src/modules/AutoinstLVM.rb:113 msgid "Cannot reuse volume group %1. The volume group does not exist." msgstr "%1 볼륨 그룹을 다시 사용할 수 없습니다. 볼륨 그룹이 존재하지 않습니다." -#. if no feeder (PV) was found for current volume group -#. the next instructions taints result -#: src/modules/AutoinstPartPlan.rb:290 +#. if no feeder (PV) was found for current volume group +#. the next instructions taints result +#: src/modules/AutoinstPartPlan.rb:290 msgid "Volume group '%1' must have at least one physical volume. Provide one." -msgstr "" -"볼륨 그룹 '%1'에 적어도 하나의 물리적 볼륨이 있어야 합니다. 하나를 제공하십시" -"오." +msgstr "볼륨 그룹 '%1'에 적어도 하나의 물리적 볼륨이 있어야 합니다. 하나를 제공하십시오." -#. PUBLIC INTERFACE -#. INTER FACE TO CONF TREE -#. Return summary of configuration -#. @return [String] configuration summary dialog -#. return Summary of configuration -#. @return [String] configuration summary dialog -#: src/modules/AutoinstPartPlan.rb:688 src/modules/AutoinstStorage.rb:913 +#. PUBLIC INTERFACE +#. INTER FACE TO CONF TREE +#. Return summary of configuration +#. @return [String] configuration summary dialog +#. return Summary of configuration +#. @return [String] configuration summary dialog +#: src/modules/AutoinstPartPlan.rb:688 src/modules/AutoinstStorage.rb:913 msgid "Drives" msgstr "드라이버" -#. We are counting harddisks only (type CT_DISK) -#: src/modules/AutoinstPartPlan.rb:694 +#. We are counting harddisks only (type CT_DISK) +#: src/modules/AutoinstPartPlan.rb:694 msgid "%s drive in total" msgid_plural "%s drives in total" msgstr[0] "총 %s개 드라이브" -#: src/modules/AutoinstPartPlan.rb:713 +#: src/modules/AutoinstPartPlan.rb:713 msgid "Not yet cloned." msgstr "아직 복제되지 않았습니다." -#. Return Summary -#. @return [String] summary -#: src/modules/AutoinstScripts.rb:343 +#. Return Summary +#. @return [String] summary +#: src/modules/AutoinstScripts.rb:343 msgid "Preinstallation Scripts" msgstr "사전 설치 스크립트" -#: src/modules/AutoinstScripts.rb:356 +#: src/modules/AutoinstScripts.rb:356 msgid "Postinstallation Scripts" msgstr "사후 설치 스크립트" -#: src/modules/AutoinstScripts.rb:369 +#: src/modules/AutoinstScripts.rb:369 msgid "Chroot Scripts" msgstr "Chroot 스크립트" -#: src/modules/AutoinstScripts.rb:382 +#: src/modules/AutoinstScripts.rb:382 msgid "Init Scripts" msgstr "초기 스크립트" -#: src/modules/AutoinstScripts.rb:395 +#: src/modules/AutoinstScripts.rb:395 msgid "Postpartitioning Scripts" msgstr "스크립트 포스트 파티셔닝 중" -#. return type of script as formatted string -#. @param script type -#. @return [String] type as translated string -#: src/modules/AutoinstScripts.rb:490 +#. return type of script as formatted string +#. @param script type +#. @return [String] type as translated string +#: src/modules/AutoinstScripts.rb:490 msgid "Pre" msgstr "Pre" -#: src/modules/AutoinstScripts.rb:492 +#: src/modules/AutoinstScripts.rb:492 msgid "Post" msgstr "Post" -#: src/modules/AutoinstScripts.rb:494 +#: src/modules/AutoinstScripts.rb:494 msgid "Init" msgstr "Init" -#: src/modules/AutoinstScripts.rb:496 +#: src/modules/AutoinstScripts.rb:496 msgid "Chroot" msgstr "Chroot" -#: src/modules/AutoinstScripts.rb:498 +#: src/modules/AutoinstScripts.rb:498 msgid "Postpartitioning" msgstr "포스트 파티셔닝 중" -#: src/modules/AutoinstScripts.rb:500 +#: src/modules/AutoinstScripts.rb:500 msgid "Unknown" msgstr "알수 없음`" -#. warning text during the installation. %1 is a list of package names -#: src/modules/AutoinstSoftware.rb:175 +#. warning text during the installation. %1 is a list of package names +#: src/modules/AutoinstSoftware.rb:175 msgid "" "These packages could not be found in the software repositories:\n" "%1" @@ -2638,176 +2547,158 @@ "이 패키지는 소프트웨어 리포지토리에서 찾을 수 없습니다.\n" "%1" -#. 4 means "already exists" -#. Add add-ons -#: src/modules/AutoinstSoftware.rb:330 src/modules/AutoinstSoftware.rb:350 +#. 4 means "already exists" +#. Add add-ons +#: src/modules/AutoinstSoftware.rb:330 src/modules/AutoinstSoftware.rb:350 msgid "Adding repo %1 failed" msgstr "%1 리포지토리 추가에 실패했습니다." -#. Install -#: src/modules/AutoinstSoftware.rb:378 -msgid "" -"Image creation failed while pattern installation. Please check /tmp/ay_image." -"log" -msgstr "" -"패턴 설치 중 이미지 생성에 실패했습니다. /tmp/ay_image.log를 확인하십시오." +#. Install +#: src/modules/AutoinstSoftware.rb:378 +msgid "Image creation failed while pattern installation. Please check /tmp/ay_image.log" +msgstr "패턴 설치 중 이미지 생성에 실패했습니다. /tmp/ay_image.log를 확인하십시오." -#: src/modules/AutoinstSoftware.rb:386 +#: src/modules/AutoinstSoftware.rb:386 msgid "Creating Image - installing packages" msgstr "이미지 생성 - 패키지 설치" -#: src/modules/AutoinstSoftware.rb:396 -msgid "" -"Image creation failed while package installation. Please check /tmp/ay_image." -"log" -msgstr "" -"패키지 설치 중 이미지 생성에 실패했습니다. /tmp/ay_image.log를 확인하십시오." +#: src/modules/AutoinstSoftware.rb:396 +msgid "Image creation failed while package installation. Please check /tmp/ay_image.log" +msgstr "패키지 설치 중 이미지 생성에 실패했습니다. /tmp/ay_image.log를 확인하십시오." -#. Popup::Message( _("in the next file dialog you have to choose the target directory to save the image") ); -#: src/modules/AutoinstSoftware.rb:407 +#. Popup::Message( _("in the next file dialog you have to choose the target directory to save the image") ); +#: src/modules/AutoinstSoftware.rb:407 msgid "Store image to ..." msgstr "이미지 저장..." -#. Compress image: -#. tar cfz /srv/www/htdocs/image.tar.gz --exclude="proc*" . -#: src/modules/AutoinstSoftware.rb:436 +#. Compress image: +#. tar cfz /srv/www/htdocs/image.tar.gz --exclude="proc*" . +#: src/modules/AutoinstSoftware.rb:436 msgid "" "You can do changes to the image now in %1/\n" -"If you press the ok-button, the image will be compressed and can't be " -"changed anymore." +"If you press the ok-button, the image will be compressed and can't be changed anymore." msgstr "" "이제 %1/에 있는 이미지를 변경할 수 있습니다.\n" "[확인] 버튼을 누르면 이미지가 압축되며 더 이상 변경할 수 없습니다." -#: src/modules/AutoinstSoftware.rb:450 +#: src/modules/AutoinstSoftware.rb:450 msgid "Image compressing failed in '%1'. Please check /tmp/ay_image.log" msgstr "'%1'에서 이미지 압축에 실패했습니다. /tmp/ay_image.log를 확인하십시오." -#: src/modules/AutoinstSoftware.rb:457 +#: src/modules/AutoinstSoftware.rb:457 msgid "Image created successfully" msgstr "이미지가 생성되었습니다." -#. copy a directory (ends with / in directory.yast) -#: src/modules/AutoinstSoftware.rb:493 +#. copy a directory (ends with / in directory.yast) +#: src/modules/AutoinstSoftware.rb:493 msgid "" "can not get the directory.yast file at `%1`.\n" "You can create that file with 'ls -F > directory.yast' if it's missing." msgstr "" "`%1`에 있는 directory.yast 파일을 가져올 수 없습니다.\n" -"누락된 경우 'ls -F > directory.yast'를 사용하여 해당 파일을 생성할 수 있습니" -"다." +"누락된 경우 'ls -F > directory.yast'를 사용하여 해당 파일을 생성할 수 있습니다." -#. don't copy subdirs. They have to be mentioned explicit. Copy only files from that dir. -#: src/modules/AutoinstSoftware.rb:527 +#. don't copy subdirs. They have to be mentioned explicit. Copy only files from that dir. +#: src/modules/AutoinstSoftware.rb:527 msgid "can not read '%1'. Try again?" msgstr "'%1'을(를) 읽을 수 없습니다. 다시 시도하시겠습니까?" -#. copy a file -#: src/modules/AutoinstSoftware.rb:545 +#. copy a file +#: src/modules/AutoinstSoftware.rb:545 msgid "can not read '%1'. ISO creation failed" msgstr "'%1'을(를) 읽을 수 없습니다. ISO 생성에 실패했습니다." -#. we will have the image.tar.gz and autoinst.xml on the root of the DVD/CD -#: src/modules/AutoinstSoftware.rb:575 +#. we will have the image.tar.gz and autoinst.xml on the root of the DVD/CD +#: src/modules/AutoinstSoftware.rb:575 msgid "Preparing ISO Filestructure ..." msgstr "ISO 파일 구조를 준비하는 중입니다." -#. prepare and save isolinux.cfg boot menu of the media -#: src/modules/AutoinstSoftware.rb:624 +#. prepare and save isolinux.cfg boot menu of the media +#: src/modules/AutoinstSoftware.rb:624 msgid "boot config for the DVD" msgstr "DVD에 대한 부팅 구성" -#: src/modules/AutoinstSoftware.rb:628 +#: src/modules/AutoinstSoftware.rb:628 msgid "Ok" msgstr "확인" -#: src/modules/AutoinstSoftware.rb:631 +#: src/modules/AutoinstSoftware.rb:631 msgid "" -"You can do changes to the ISO now in %1, like adding a complete different " -"AutoYaST XML file.\n" +"You can do changes to the ISO now in %1, like adding a complete different AutoYaST XML file.\n" "If you press the ok-button, the iso will be created." msgstr "" -"이제 %1에 있는 ISO를 변경할 수 있습니다(예: 완전히 다른 AutoYaST XML 파일 추" -"가).\n" +"이제 %1에 있는 ISO를 변경할 수 있습니다(예: 완전히 다른 AutoYaST XML 파일 추가).\n" "[확인] 버튼을 누르면 ISO가 생성됩니다." -#. create the actual ISO file -#. Popup::Message( _("Please choose a place where you want to save the ISO file in the next dialog") ); -#: src/modules/AutoinstSoftware.rb:650 +#. create the actual ISO file +#. Popup::Message( _("Please choose a place where you want to save the ISO file in the next dialog") ); +#: src/modules/AutoinstSoftware.rb:650 msgid "Store ISO image to ..." msgstr "ISO 이미지 저장..." -#: src/modules/AutoinstSoftware.rb:651 +#: src/modules/AutoinstSoftware.rb:651 msgid "Creating ISO File ..." msgstr "ISO 파일을 생성하는 중입니다." -#: src/modules/AutoinstSoftware.rb:672 +#: src/modules/AutoinstSoftware.rb:672 msgid "ISO successfully created at %1" msgstr "ISO가 %1에 생성되었습니다." -#. Summary -#. @return Html formatted configuration summary -#: src/modules/AutoinstSoftware.rb:757 +#. Summary +#. @return Html formatted configuration summary +#: src/modules/AutoinstSoftware.rb:757 msgid "Selected Patterns" msgstr "선택한 패턴" -#: src/modules/AutoinstSoftware.rb:767 +#: src/modules/AutoinstSoftware.rb:767 msgid "Individually Selected Packages" msgstr "개별적으로 선택된 패키지들" -#: src/modules/AutoinstSoftware.rb:773 +#: src/modules/AutoinstSoftware.rb:773 msgid "Packages to Remove" msgstr "제거할 패키지" -#: src/modules/AutoinstSoftware.rb:780 +#: src/modules/AutoinstSoftware.rb:780 msgid "Force Kernel Package" msgstr "필수 커널 패키지" -#. set SoftLock to avoid the installation of recommended patterns (#159466) -#: src/modules/AutoinstSoftware.rb:875 +#. set SoftLock to avoid the installation of recommended patterns (#159466) +#: src/modules/AutoinstSoftware.rb:875 msgid "Could not set patterns: %1." msgstr "패턴을 설정할 수 없습니다. %1" -#. Solve dependencies -#: src/modules/AutoinstSoftware.rb:936 -msgid "" -"The package resolver run failed. Please check your software section in the " -"autoyast profile." -msgstr "" -"package resolver 실행에 실패했습니다. autoyast 프로파일의 사용자 소프트웨어 " -"섹션을 검사하십시오." +#. Solve dependencies +#: src/modules/AutoinstSoftware.rb:936 +msgid "The package resolver run failed. Please check your software section in the autoyast profile." +msgstr "package resolver 실행에 실패했습니다. autoyast 프로파일의 사용자 소프트웨어 섹션을 검사하십시오." -#. 1 cyl buffer per partition -#: src/modules/AutoinstStorage.rb:494 -msgid "" -"The partition plan configured in your XML profile does not fit on the hard " -"disk. %1MB missing" -msgstr "" -"XML 프로파일에 구성된 파티션 계획이 하드 디스크에 적합하지 않습니다. %1MB가 " -"누락되었습니다." +#. 1 cyl buffer per partition +#: src/modules/AutoinstStorage.rb:494 +msgid "The partition plan configured in your XML profile does not fit on the hard disk. %1MB missing" +msgstr "XML 프로파일에 구성된 파티션 계획이 하드 디스크에 적합하지 않습니다. %1MB가 누락되었습니다." -#: src/modules/AutoinstStorage.rb:917 +#: src/modules/AutoinstStorage.rb:917 msgid "Total of %1 drive" msgstr "%1 드라이버의 총계" -#: src/modules/AutoinstStorage.rb:923 +#: src/modules/AutoinstStorage.rb:923 msgid "No specific device configured" msgstr "특정 장치가 구성되지 않았습니다." -#. Handle /etc/fstab usage -#. @return [Boolean] -#: src/modules/AutoinstStorage.rb:1018 +#. Handle /etc/fstab usage +#. @return [Boolean] +#: src/modules/AutoinstStorage.rb:1018 msgid "Evaluating root partition. One moment please..." msgstr "루트 파티션을 검사합니다. 잠시 기다리십시오..." -#. a popup -#: src/modules/AutoinstStorage.rb:1026 +#. a popup +#: src/modules/AutoinstStorage.rb:1026 msgid "No Linux root partition found." msgstr "Linux 루트 파티션을 찾을수 없습니다." -#. We must only change RootPart::selectedRootPartition if booting -#. is inevitable. -#: src/modules/AutoinstStorage.rb:1039 +#. We must only change RootPart::selectedRootPartition if booting +#. is inevitable. +#: src/modules/AutoinstStorage.rb:1039 msgid "" "Multiple root partitions found, but you did not configure\n" "which root partition should be used. Automatic installation not possible.\n" @@ -2815,49 +2706,49 @@ "루트 파티션을 여러 개 찾았지만 사용할 루트 파티션을\n" "구성하지 않았습니다. 자동 설치를 수행할 수 없습니다.\n" -#. return list of available devices -#: src/modules/AutoinstStorage.rb:1122 +#. return list of available devices +#: src/modules/AutoinstStorage.rb:1122 msgid "device '%1' not found by storage backend" msgstr "저장소 백엔드로 장치 '%1'을 찾지 못함" -#. Prepare Profile for saving and remove empty data structs -#. @return [void] -#: src/modules/Profile.rb:362 +#. Prepare Profile for saving and remove empty data structs +#. @return [void] +#: src/modules/Profile.rb:362 msgid "Collecting configuration data..." msgstr "구성 데이터 수집 중..." -#. Save YCP data into XML -#. @param path to file -#. @return [Boolean] true on success -#: src/modules/Profile.rb:462 +#. Save YCP data into XML +#. @param path to file +#. @return [Boolean] true on success +#: src/modules/Profile.rb:462 msgid "Encrypted AutoYaST profile. Enter the password twice." msgstr "암호화된 AutoYaST 프로파일입니다. 비밀번호를 두 번 입력하십시오." -#. Save sections of current profile to separate files -#. -#. @param [String] dir - directory to store section xml files in -#. @return - list of filenames -#: src/modules/Profile.rb:536 +#. Save sections of current profile to separate files +#. +#. @param [String] dir - directory to store section xml files in +#. @return - list of filenames +#: src/modules/Profile.rb:536 msgid "Could not write section %1 to file %2." msgstr "%1 섹션을 %2 파일에 쓸 수 없습니다." -#. Read XML into YCP data -#. @param path to file -#. @return [Boolean] -#: src/modules/Profile.rb:703 src/modules/ProfileLocation.rb:190 +#. Read XML into YCP data +#. @param path to file +#. @return [Boolean] +#: src/modules/Profile.rb:703 src/modules/ProfileLocation.rb:190 msgid "Encrypted AutoYaST profile. Enter the correct password." msgstr "암호화된 AutoYaST 프로파일입니다. 올바른 비밀번호를 입력하십시오." -#. need to call this to force Storage stuff to initialize just now -#: src/modules/ProfileLocation.rb:156 +#. need to call this to force Storage stuff to initialize just now +#: src/modules/ProfileLocation.rb:156 msgid "label not found while looking for autoyast profile" msgstr "autoyast 프로파일을 찾는 중 레이블을 찾을 수 없습니다." -#. autoyast hit an error while fetching it's config file -#: src/modules/ProfileLocation.rb:179 +#. autoyast hit an error while fetching it's config file +#: src/modules/ProfileLocation.rb:179 msgid "An error occurred while fetching the profile:\n" msgstr "프로파일을 가져오는 동안 오류가 발생했습니다:\n" -#: src/modules/ProfileLocation.rb:193 +#: src/modules/ProfileLocation.rb:193 msgid "&OK" msgstr "확인(&O)" Modified: branches/SLE12-SP3/yast/ko/po/base.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/base.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/base.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -15,9 +15,9 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#. Translators: a warning message in a continue-cancel question -#. Opscode Chef is a different way to configure the system. -#: library/commandline/src/clients/other_tools_warning.rb:43 +#. Translators: a warning message in a continue-cancel question +#. Opscode Chef is a different way to configure the system. +#: library/commandline/src/clients/other_tools_warning.rb:43 msgid "" "Chef Client is running. The changes that you make\n" "may be overridden by Chef later.\n" @@ -27,137 +27,130 @@ "Chef에 의해 무효화될 수도 있습니다.\n" "YaST 구성을 계속하시겠습니까?" -#. translators: help for 'help' option on command line -#: library/commandline/src/modules/CommandLine.rb:54 +#. translators: help for 'help' option on command line +#: library/commandline/src/modules/CommandLine.rb:54 msgid "Print the help for this module" msgstr "이 모듈을 위해 도움말을 출력" -#. translators: help for 'longhelp' option on command line -#: library/commandline/src/modules/CommandLine.rb:60 +#. translators: help for 'longhelp' option on command line +#: library/commandline/src/modules/CommandLine.rb:60 msgid "Print a long version of help for this module" msgstr "이 모듈을 위해 오래된 버젼의 도움말을 출력" -#. translators: help for 'xmlhelp' option on command line -#: library/commandline/src/modules/CommandLine.rb:66 +#. translators: help for 'xmlhelp' option on command line +#: library/commandline/src/modules/CommandLine.rb:66 msgid "Print a long version of help for this module in XML format" msgstr "이 모듈에 대한 긴 버전의 도움말을 XML 형식으로 출력" -#. translators: help for 'interactive' option on command line -#: library/commandline/src/modules/CommandLine.rb:72 +#. translators: help for 'interactive' option on command line +#: library/commandline/src/modules/CommandLine.rb:72 msgid "Start interactive shell to control the module" msgstr "대화형 셸을 시작하여 모듈을 제어합니다." -#. translators: help for 'exit' command line interactive mode -#: library/commandline/src/modules/CommandLine.rb:78 +#. translators: help for 'exit' command line interactive mode +#: library/commandline/src/modules/CommandLine.rb:78 msgid "Exit interactive mode and save the changes" msgstr "대화형 모드를 끝내고 변경 내용을 저장합니다." -#. translators: help for 'abort' command line interactive mode -#: library/commandline/src/modules/CommandLine.rb:84 +#. translators: help for 'abort' command line interactive mode +#: library/commandline/src/modules/CommandLine.rb:84 msgid "Abort interactive mode without saving the changes" msgstr "변경 사항을 저장하지 않은 채 대화형 모드 중단" -#. translators: command line "help" option -#: library/commandline/src/modules/CommandLine.rb:92 +#. translators: command line "help" option +#: library/commandline/src/modules/CommandLine.rb:92 msgid "Print the help for this command" msgstr "이 명령을 위해 도움말을 출력" -#. translators: command line "verbose" option -#: library/commandline/src/modules/CommandLine.rb:98 +#. translators: command line "verbose" option +#: library/commandline/src/modules/CommandLine.rb:98 msgid "Show progress information" msgstr "진행 정보 보기" -#. translators: command line "xmlfile" option -#: library/commandline/src/modules/CommandLine.rb:104 +#. translators: command line "xmlfile" option +#: library/commandline/src/modules/CommandLine.rb:104 msgid "Where to store the XML output" msgstr "XML 출력을 저장할 위치" -#. string: command line interface is not supported -#: library/commandline/src/modules/CommandLine.rb:144 +#. string: command line interface is not supported +#: library/commandline/src/modules/CommandLine.rb:144 msgid "This YaST2 module does not support the command line interface." msgstr "이 YaST2 모듈은 명령줄 인터페이스를 지원하지 않습니다." -#. translators: default error message for command line -#: library/commandline/src/modules/CommandLine.rb:322 +#. translators: default error message for command line +#: library/commandline/src/modules/CommandLine.rb:322 msgid "Use 'help' for a complete list of available commands." -msgstr "" -"사용가능한 명령들의 목록을 완벽하게 하기 위해서 ' 도움말'을 사용하십시오." +msgstr "사용가능한 명령들의 목록을 완벽하게 하기 위해서 ' 도움말'을 사용하십시오." -#. translators: default error message for command line -#: library/commandline/src/modules/CommandLine.rb:327 +#. translators: default error message for command line +#: library/commandline/src/modules/CommandLine.rb:327 msgid "Use 'yast2 %1 help' for a complete list of available commands." -msgstr "" -"사용가능한 명령들의 목록을 완벽하게 하기 위해서 ' yast2 %1 도움말'을 사용하십" -"시오." +msgstr "사용가능한 명령들의 목록을 완벽하게 하기 위해서 ' yast2 %1 도움말'을 사용하십시오." -#. translators: error message in command line interface -#: library/commandline/src/modules/CommandLine.rb:365 +#. translators: error message in command line interface +#: library/commandline/src/modules/CommandLine.rb:365 msgid "Unknown Command: %1" msgstr "알수없는 명령: %1" -#. translators: error message - user did not provide a value for option %1 on the command line -#: library/commandline/src/modules/CommandLine.rb:403 +#. translators: error message - user did not provide a value for option %1 on the command line +#: library/commandline/src/modules/CommandLine.rb:403 msgid "Option '%1' is missing value." msgstr "%1 옵션의 값을 찾을수 없습니다." -#. translators: error message, %1 is a command, %2 is the wrong option given by the user -#: library/commandline/src/modules/CommandLine.rb:438 +#. translators: error message, %1 is a command, %2 is the wrong option given by the user +#: library/commandline/src/modules/CommandLine.rb:438 msgid "Unknown option for command '%1': %2" msgstr "'%1' 명령을 위해 알려지지 않는 옵션: %2" -#. translators: error message, %2 is the value given -#. translators: error message, %2 is the value given -#. translators: error message, %2 is the value given -#: library/commandline/src/modules/CommandLine.rb:459 -#: library/commandline/src/modules/CommandLine.rb:471 -#: library/commandline/src/modules/CommandLine.rb:481 +#. translators: error message, %2 is the value given +#. translators: error message, %2 is the value given +#. translators: error message, %2 is the value given +#: library/commandline/src/modules/CommandLine.rb:459 +#: library/commandline/src/modules/CommandLine.rb:471 +#: library/commandline/src/modules/CommandLine.rb:481 msgid "Invalid value for option '%1': %2" msgstr "'%1' 옵션을 위해 부적당한 값: %2" -#. translators: error message, %2 is expected type, %3 is the value given -#: library/commandline/src/modules/CommandLine.rb:495 +#. translators: error message, %2 is expected type, %3 is the value given +#: library/commandline/src/modules/CommandLine.rb:495 msgid "Invalid value for option '%1' -- expected '%2', received %3" msgstr "'%1' 옵션을 위한 부적당한 값 -- 기대된 '%2', 받아들여진 %3 " -#. translators: error message if option has a value, but cannot have one -#: library/commandline/src/modules/CommandLine.rb:515 +#. translators: error message if option has a value, but cannot have one +#: library/commandline/src/modules/CommandLine.rb:515 msgid "Option '%1' cannot have a value. Given value: %2" msgstr "'%1' 옵션에는 값을 지정할 수 없습니다. 지정된 값: %2" -#. translators: error message, how to get command line help for interactive mode -#. %1 is the module name, %2 is the action name -#: library/commandline/src/modules/CommandLine.rb:533 +#. translators: error message, how to get command line help for interactive mode +#. %1 is the module name, %2 is the action name +#: library/commandline/src/modules/CommandLine.rb:533 msgid "Use '%1 %2 help' for a complete list of available options." -msgstr "" -"사용가능한 옵션들의 목록을 완벽하게 하기 위해서 ' %1 %2 도움말' 을 사용하십시" -"오." +msgstr "사용가능한 옵션들의 목록을 완벽하게 하기 위해서 ' %1 %2 도움말' 을 사용하십시오." -#. translators: error message, how to get command line help for non-interactive mode -#. %1 is the module name, %2 is the action name -#: library/commandline/src/modules/CommandLine.rb:543 +#. translators: error message, how to get command line help for non-interactive mode +#. %1 is the module name, %2 is the action name +#: library/commandline/src/modules/CommandLine.rb:543 msgid "Use 'yast2 %1 %2 help' for a complete list of available options." -msgstr "" -"사용가능한 옵션들의 목록을 완벽하게 하기 위해서 ' yast2 %1 %2 도움말' 을 사용" -"하십시오." +msgstr "사용가능한 옵션들의 목록을 완벽하게 하기 위해서 ' yast2 %1 %2 도움말' 을 사용하십시오." -#. translators: command line interface header, %1 is identification of the module -#: library/commandline/src/modules/CommandLine.rb:561 +#. translators: command line interface header, %1 is identification of the module +#: library/commandline/src/modules/CommandLine.rb:561 msgid "YaST Configuration Module %1\n" msgstr "%1 YaST 설정 모듈\n" -#. translators: the command does not provide any help -#: library/commandline/src/modules/CommandLine.rb:585 +#. translators: the command does not provide any help +#: library/commandline/src/modules/CommandLine.rb:585 msgid "No help available" msgstr "사용가능한 도움말 없습니다." -#. Process <command> "help" -#. translators: %1 is the command name -#: library/commandline/src/modules/CommandLine.rb:589 +#. Process <command> "help" +#. translators: %1 is the command name +#: library/commandline/src/modules/CommandLine.rb:589 msgid "Command '%1'" msgstr "'%1 명령" -#. translators: command line options -#: library/commandline/src/modules/CommandLine.rb:609 +#. translators: command line options +#: library/commandline/src/modules/CommandLine.rb:609 msgid "" "\n" " Options:" @@ -165,8 +158,8 @@ "\n" " 옵션:" -#. additional help for using command line -#: library/commandline/src/modules/CommandLine.rb:698 +#. additional help for using command line +#: library/commandline/src/modules/CommandLine.rb:698 msgid "" "\n" " Options of the [string] type must be written in the form 'option=value'." @@ -174,8 +167,8 @@ "\n" " [string] 유형의 옵션은 'option=값' 형식으로 입력되어야 합니다." -#. translators: example title for command line -#: library/commandline/src/modules/CommandLine.rb:705 +#. translators: example title for command line +#: library/commandline/src/modules/CommandLine.rb:705 msgid "" "\n" " Example:" @@ -183,193 +176,184 @@ "\n" " 예:" -#. translators: default module description if none is provided by the module itself -#: library/commandline/src/modules/CommandLine.rb:735 +#. translators: default module description if none is provided by the module itself +#: library/commandline/src/modules/CommandLine.rb:735 msgid "This is a YaST module." msgstr "YaST 모듈입니다." -#. translators: short help title for command line -#: library/commandline/src/modules/CommandLine.rb:740 +#. translators: short help title for command line +#: library/commandline/src/modules/CommandLine.rb:740 msgid "Basic Syntax:" msgstr "기본 구문:" -#. translators: module command line help, %1 is the module name -#. translate <command> and [options] only! -#: library/commandline/src/modules/CommandLine.rb:755 +#. translators: module command line help, %1 is the module name +#. translate <command> and [options] only! +#: library/commandline/src/modules/CommandLine.rb:755 msgid " yast2 %1 <command> [verbose] [options]" msgstr " yast2 %1 <명령> [verbose] [옵션들]" -#. translators: module command line help, %1 is the module name -#. translate <command> only! -#: library/commandline/src/modules/CommandLine.rb:782 +#. translators: module command line help, %1 is the module name +#. translate <command> only! +#: library/commandline/src/modules/CommandLine.rb:782 msgid " yast2 %1 <command> help" msgstr " yast2 %1 <명령> 도움말" -#. translators: module command line help -#. translate <command> and [options] only! -#: library/commandline/src/modules/CommandLine.rb:789 +#. translators: module command line help +#. translate <command> and [options] only! +#: library/commandline/src/modules/CommandLine.rb:789 msgid " <command> [options]" msgstr " <명령> [옵션들]" -#. translators: module command line help -#. translate <command> only! -#: library/commandline/src/modules/CommandLine.rb:792 +#. translators: module command line help +#. translate <command> only! +#: library/commandline/src/modules/CommandLine.rb:792 msgid " <command> help" msgstr " <명령> 도움말" -#. translators: command line title: list of available commands -#: library/commandline/src/modules/CommandLine.rb:804 +#. translators: command line title: list of available commands +#: library/commandline/src/modules/CommandLine.rb:804 msgid "Commands:" msgstr "명령들:" -#. translators: error message: module does not provide any help messages -#: library/commandline/src/modules/CommandLine.rb:820 +#. translators: error message: module does not provide any help messages +#: library/commandline/src/modules/CommandLine.rb:820 msgid "No help available." msgstr "사용가능한 도움말이 없습니다." -#. fallback message - invalid help has been provided by the yast module -#: library/commandline/src/modules/CommandLine.rb:856 +#. fallback message - invalid help has been provided by the yast module +#: library/commandline/src/modules/CommandLine.rb:856 msgid "" msgstr "<오류: 잘못된 도움말>" -#. translators: module command line help, %1 is the module name -#: library/commandline/src/modules/CommandLine.rb:866 +#. translators: module command line help, %1 is the module name +#: library/commandline/src/modules/CommandLine.rb:866 msgid "Run 'yast2 %1 <command> help' for a list of available options." -msgstr "" -"사용 가능한 옵션들의 목록을 위해서 'yast2 %1 <명령> 도움말'을 운영 하십시오. " +msgstr "사용 가능한 옵션들의 목록을 위해서 'yast2 %1 <명령> 도움말'을 운영 하십시오. " -#. error message - command line option xmlfile is missing -#: library/commandline/src/modules/CommandLine.rb:930 -msgid "" -"Target file name ('xmlfile' option) is missing. Use " -"xmlfile= command line option." -msgstr "" -"대상 파일 이름('xmlfile' 옵션)이 누락되었습니다. xmlfile= 명" -"령줄 옵션을 사용하십시오." +#. error message - command line option xmlfile is missing +#: library/commandline/src/modules/CommandLine.rb:930 +msgid "Target file name ('xmlfile' option) is missing. Use xmlfile= command line option." +msgstr "대상 파일 이름('xmlfile' 옵션)이 누락되었습니다. xmlfile= 명령줄 옵션을 사용하십시오." -#. error message - command line option xmlfile is missing -#: library/commandline/src/modules/CommandLine.rb:942 -msgid "" -"Target file name ('xmlfile' option) is empty. Use xmlfile= " -"command line option." -msgstr "" -"대상 파일 이름('xmlfile' 옵션)이 비어 있습니다. xmlfile= 명" -"령줄 옵션을 사용하십시오." +#. error message - command line option xmlfile is missing +#: library/commandline/src/modules/CommandLine.rb:942 +msgid "Target file name ('xmlfile' option) is empty. Use xmlfile= command line option." +msgstr "대상 파일 이름('xmlfile' 옵션)이 비어 있습니다. xmlfile= 명령줄 옵션을 사용하십시오." -#. translators: fallback name for a module at command line -#: library/commandline/src/modules/CommandLine.rb:1079 +#. translators: fallback name for a module at command line +#: library/commandline/src/modules/CommandLine.rb:1079 msgid "unknown" msgstr "알수없음" -#. translators: the last command %1 in a list of unique commands -#: library/commandline/src/modules/CommandLine.rb:1437 +#. translators: the last command %1 in a list of unique commands +#: library/commandline/src/modules/CommandLine.rb:1437 msgid "or '%1'" msgstr "또는 '%1'" -#. translators: error message - missing unique command for command line execution -#: library/commandline/src/modules/CommandLine.rb:1445 +#. translators: error message - missing unique command for command line execution +#: library/commandline/src/modules/CommandLine.rb:1445 msgid "Specify the command '%1'." msgstr "'%1' 명령을 명시합니다." -#. translators: error message - missing unique command for command line execution -#: library/commandline/src/modules/CommandLine.rb:1452 +#. translators: error message - missing unique command for command line execution +#: library/commandline/src/modules/CommandLine.rb:1452 msgid "Specify one of the commands: %1." msgstr "그 명령중에 명시: %1." -#. size( unique_options ) == 1 here does not make sense -#: library/commandline/src/modules/CommandLine.rb:1462 +#. size( unique_options ) == 1 here does not make sense +#: library/commandline/src/modules/CommandLine.rb:1462 msgid "Specify only one of the commands: %1." msgstr "그 명령중에 한개를 명시: %1." -#. translators: error message - the module does not provide command line interface -#: library/commandline/src/modules/CommandLine.rb:1507 +#. translators: error message - the module does not provide command line interface +#: library/commandline/src/modules/CommandLine.rb:1507 msgid "There is no user interface available for this module." msgstr "이 모듈에 대한 유저 인터페이스를 이용할 수 없습니다." -#. translators: progress message - command line interface ready -#: library/commandline/src/modules/CommandLine.rb:1536 +#. translators: progress message - command line interface ready +#: library/commandline/src/modules/CommandLine.rb:1536 msgid "Ready" msgstr "준비" -#. non-GUI handling -#: library/commandline/src/modules/CommandLine.rb:1550 +#. non-GUI handling +#: library/commandline/src/modules/CommandLine.rb:1550 msgid "Initializing" msgstr "초기화중" -#. translators: Progress message - the command line interface is about to finish -#: library/commandline/src/modules/CommandLine.rb:1584 +#. translators: Progress message - the command line interface is about to finish +#: library/commandline/src/modules/CommandLine.rb:1584 msgid "Finishing" msgstr "완료중" -#. translators: The command line interface is finished -#: library/commandline/src/modules/CommandLine.rb:1591 +#. translators: The command line interface is finished +#: library/commandline/src/modules/CommandLine.rb:1591 msgid "Done" msgstr "완료" -#. translators: The command line interface is finished without writing the changes -#: library/commandline/src/modules/CommandLine.rb:1594 +#. translators: The command line interface is finished without writing the changes +#: library/commandline/src/modules/CommandLine.rb:1594 msgid "Quitting (without changes)" msgstr "완료중(변경 없이)" -#. prompt message displayed in the commandline mode -#. when user is asked to replay "yes" or "no" (localized) -#: library/commandline/src/modules/CommandLine.rb:1608 +#. prompt message displayed in the commandline mode +#. when user is asked to replay "yes" or "no" (localized) +#: library/commandline/src/modules/CommandLine.rb:1608 msgid "yes or no?" msgstr "예 또는 아니오를 선택하십시오." -#. yes - used in the command line mode as input text for yes/no confirmation -#: library/commandline/src/modules/CommandLine.rb:1613 +#. yes - used in the command line mode as input text for yes/no confirmation +#: library/commandline/src/modules/CommandLine.rb:1613 msgid "yes" msgstr "예" -#. no - used in the command line mode as input text for yes/no confirmation -#: library/commandline/src/modules/CommandLine.rb:1616 +#. no - used in the command line mode as input text for yes/no confirmation +#: library/commandline/src/modules/CommandLine.rb:1616 msgid "no" msgstr "아니오" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#. File: modules/InstError.ycp -#. Package: Installation -#. Summary: Module for reporting installation errors -#. Authors: Lukas Ocilka -#. -#. $Id$ -#. -#. This module provides unified interface for reporting -#. installation errors. -#: library/control/src/modules/InstError.rb:72 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#. File: modules/InstError.ycp +#. Package: Installation +#. Summary: Module for reporting installation errors +#. Authors: Lukas Ocilka +#. +#. $Id$ +#. +#. This module provides unified interface for reporting +#. installation errors. +#: library/control/src/modules/InstError.rb:72 msgid "Save y2logs to..." msgstr "y2logs 저장..." -#. Busy message, %1 is replaced with a filename -#: library/control/src/modules/InstError.rb:79 +#. Busy message, %1 is replaced with a filename +#: library/control/src/modules/InstError.rb:79 msgid "Saving YaST logs to %1..." msgstr "YaST 로그를 %1에 저장 중..." -#. Error message, %1 is replaced with a filename -#. %2 with am error reason (there is a newline between %1 and %2) -#: library/control/src/modules/InstError.rb:98 +#. Error message, %1 is replaced with a filename +#. %2 with am error reason (there is a newline between %1 and %2) +#: library/control/src/modules/InstError.rb:98 msgid "" "Unable to save YaST logs to %1\n" "%2" @@ -377,17 +361,17 @@ "YaST 로그를 %1 에 저장할 수 없음\n" "%2" -#. TRANSLATORS: part of an error message -#. // %1 - logfile, possibly with errors -#: library/control/src/modules/InstError.rb:139 +#. TRANSLATORS: part of an error message +#. // %1 - logfile, possibly with errors +#: library/control/src/modules/InstError.rb:139 msgid "More information can be found near the end of the '%1' file." msgstr "기타 정보는 '%1' 파일의 끝부분에서 찾을 수 있습니다." -#. TRANSLATORS: part of an error message -#. %1 - link to our bugzilla -#. %2 - directory where YaST logs are stored -#. %3 - link to the Yast Bug Reporting HOWTO Web page -#: library/control/src/modules/InstError.rb:157 +#. TRANSLATORS: part of an error message +#. %1 - link to our bugzilla +#. %2 - directory where YaST logs are stored +#. %3 - link to the Yast Bug Reporting HOWTO Web page +#: library/control/src/modules/InstError.rb:157 msgid "" "This is worth reporting a bug at %1.\n" "Please, attach also all YaST logs stored in the '%2' directory.\n" @@ -397,86 +381,86 @@ "'%2' 디렉토리에 저장된 모든 YaST 로그를 첨부하여 보고해주십시오.\n" "YaST 로그에 대한 자세한 사항은 %3을(를) 참고하십시오." -#. link to the Yast Bug Reporting HOWTO -#. for translators: use the localized page for your language if it exists, -#. check the combo box "In other laguages" on top of the page -#. link to the Yast Bug Reporting HOWTO -#. for translators: use the localized page for your language if it exists, -#. check the combo box "In other laguages" on top of the page -#: library/control/src/modules/InstError.rb:167 -#: library/control/src/modules/ProductControl.rb:1435 +#. link to the Yast Bug Reporting HOWTO +#. for translators: use the localized page for your language if it exists, +#. check the combo box "In other laguages" on top of the page +#. link to the Yast Bug Reporting HOWTO +#. for translators: use the localized page for your language if it exists, +#. check the combo box "In other laguages" on top of the page +#: library/control/src/modules/InstError.rb:167 +#: library/control/src/modules/ProductControl.rb:1435 msgid "http://en.opensuse.org/Bugs/YaST" msgstr "http://en.opensuse.org/Bugs/YaST" -#. FIXME: BNC #422612, Use `opt(`noSanityCheck) later -#: library/control/src/modules/InstError.rb:178 +#. FIXME: BNC #422612, Use `opt(`noSanityCheck) later +#: library/control/src/modules/InstError.rb:178 msgid "&Save YaST Logs..." msgstr "YaST 로그 저장(&S)..." -#. Function is similar to ShowErrorPopUp but the error details are grabbed automatically -#. from YaST logs. -#. -#. @param [String] error_text (e.g., "Client inst_abc returned invalid data.") -#: library/control/src/modules/InstError.rb:222 +#. Function is similar to ShowErrorPopUp but the error details are grabbed automatically +#. from YaST logs. +#. +#. @param [String] error_text (e.g., "Client inst_abc returned invalid data.") +#: library/control/src/modules/InstError.rb:222 msgid "Installation Error" msgstr "설치 오류" -#. Load a rpm package from the media into the inst-sys and ensure its -#. unloading after end of block. -#. @param [String] package to load -#. @param [Proc] Block to be yield -#. @raises [RuntimeError] when package loading failed -#. -#. @example -#. InstExtensionImage.with_extension("snapper") do -#. WFM.Execute(path(".local.bash"), "snapper magic") -#. end -#: library/control/src/modules/InstExtensionImage.rb:352 +#. Load a rpm package from the media into the inst-sys and ensure its +#. unloading after end of block. +#. @param [String] package to load +#. @param [Proc] Block to be yield +#. @raises [RuntimeError] when package loading failed +#. +#. @example +#. InstExtensionImage.with_extension("snapper") do +#. WFM.Execute(path(".local.bash"), "snapper magic") +#. end +#: library/control/src/modules/InstExtensionImage.rb:352 msgid "Loading to memory package '%s'" msgstr "메모리 패키지 '%s'(으)로 로드 중" -#: library/control/src/modules/InstExtensionImage.rb:358 +#: library/control/src/modules/InstExtensionImage.rb:358 msgid "Removing from memory package '%s'" msgstr "메모리 패키지 '%s'에서 제거 중" -#. error report -#: library/control/src/modules/ProductControl.rb:1244 +#. error report +#: library/control/src/modules/ProductControl.rb:1244 msgid "No workflow defined for this installation mode." msgstr "이 설치 모드에 대해 정의된 워크플로가 없습니다." -#. last part of the question (variable) -#: library/control/src/modules/ProductProfile.rb:180 +#. last part of the question (variable) +#: library/control/src/modules/ProductProfile.rb:180 msgid "Do you want to continue or abort the installation?" msgstr "이 설치를 계속하시겠습니까, 아니면 중단하시겠습니까?" -#. button label -#. Button that will continue with the installation -#: library/control/src/modules/ProductProfile.rb:183 -#: library/general/src/modules/Popup.rb:737 +#. button label +#. Button that will continue with the installation +#: library/control/src/modules/ProductProfile.rb:183 +#: library/general/src/modules/Popup.rb:737 msgid "&Continue Installation" msgstr "계속 설치(&C)" -#. button label -#. Button that will really abort the installation -#: library/control/src/modules/ProductProfile.rb:185 -#: library/general/src/modules/Popup.rb:735 +#. button label +#. Button that will really abort the installation +#: library/control/src/modules/ProductProfile.rb:185 +#: library/general/src/modules/Popup.rb:735 msgid "&Abort Installation" msgstr "설치 중단(&A)" -#. last part of the question (variable) -#: library/control/src/modules/ProductProfile.rb:190 +#. last part of the question (variable) +#: library/control/src/modules/ProductProfile.rb:190 msgid "Do you want to add new product anyway?" msgstr "새 제품을 추가하시겠습니까?" -#. popup dialog caption -#. this string is usually used as headline of a popup -#: library/control/src/modules/ProductProfile.rb:197 -#: library/general/src/modules/Label.rb:256 +#. popup dialog caption +#. this string is usually used as headline of a popup +#: library/control/src/modules/ProductProfile.rb:197 +#: library/general/src/modules/Label.rb:256 msgid "Warning" msgstr "경고" -#. popup message, %1 is list of problems -#: library/control/src/modules/ProductProfile.rb:200 +#. popup message, %1 is list of problems +#: library/control/src/modules/ProductProfile.rb:200 msgid "" "The profile does not allow you to run the products on this system.\n" "Proceeding to run this installation will leave you in an unsupported state\n" @@ -498,28 +482,28 @@ "\n" "%2" -#. make sure that every workflow is merged only once -#. bugzilla #332436 -#: library/control/src/modules/WorkflowManager.rb:1306 +#. make sure that every workflow is merged only once +#. bugzilla #332436 +#: library/control/src/modules/WorkflowManager.rb:1306 msgid "An internal error occurred when integrating additional workflow." msgstr "추가 워크플로를 통합하는 중 내부 오류가 발생했습니다." -#. message popup, %1 is a label of some widget -#: library/cwm/src/modules/CWM.rb:691 +#. message popup, %1 is a label of some widget +#: library/cwm/src/modules/CWM.rb:691 msgid "The value of %1 is invalid." msgstr "%1의 값이 부적당합니다." -#. service status - label -#: library/cwm/src/modules/CWMServiceStart.rb:67 +#. service status - label +#: library/cwm/src/modules/CWMServiceStart.rb:67 msgid "Unavailable" msgstr "사용할수없음" -#. help text for service auto start widget -#. %1 and %2 are button labels -#. %1 is eg. "On -- Start Service when Booting" -#. %2 is eg. "Off -- Start Service Manually" -#. (both without quotes) -#: library/cwm/src/modules/CWMServiceStart.rb:225 +#. help text for service auto start widget +#. %1 and %2 are button labels +#. %1 is eg. "On -- Start Service when Booting" +#. %2 is eg. "Off -- Start Service Manually" +#. (both without quotes) +#: library/cwm/src/modules/CWMServiceStart.rb:225 msgid "" "<p><b><big>Service Start</big></b><br>\n" "To start the service every time your computer is booted, set\n" @@ -527,16 +511,15 @@ msgstr "" "<p><b><big>서비스 시작</big></b><br>\n" "컴퓨터를 켤 때마다 서비스가 시작되도록 하려면\n" -" <b>%1</b>을(를) 설정하십시오. 그렇지 않으면 <b>%2</b>을(를) 설정하십시오." +" <b>%1</b>을(를) 설정하십시오. 그렇지 않으면 <b>%2</b>을(를) 설정하십시오.</p>" -#. help text for service auto start widget -#. %1, %2 and %3 are button labels -#. %1 is eg. "On -- Start Service when Booting" -#. %2 is eg. "Off -- Start Service Manually" -#. %3 is eg. "Start Service via xinetd" -#. (both without quotes) -#: library/cwm/src/modules/CWMServiceStart.rb:241 +#. help text for service auto start widget +#. %1, %2 and %3 are button labels +#. %1 is eg. "On -- Start Service when Booting" +#. %2 is eg. "Off -- Start Service Manually" +#. %3 is eg. "Start Service via xinetd" +#. (both without quotes) +#: library/cwm/src/modules/CWMServiceStart.rb:241 msgid "" "<p><b><big>Service Start</big></b><br>\n" "To start the service every time your computer is booted, set\n" @@ -545,59 +528,58 @@ msgstr "" "<p><b><big>서비스 시작</big></b><br>\n" "컴퓨터를 시작할 때마다 서비스를 시작하려면\n" -"<b>%1</b>을(를) 설정하십시오. xinetd 데몬을 통해 서비스를 시작하려면 <b>%3을(를) 설정하고,\n" +"<b>%1</b>을(를) 설정하십시오. xinetd 데몬을 통해 서비스를 시작하려면 <b>%3</b>을(를) 설정하고,\n" "그렇지 않으면 <b>%2</b>을(를) 설정하십시오.</p>" -#. part of help text - radio button label, NO SHORTCUT!!! -#. part of help text - radio button label, NO SHORTCUT!!! -#. radio button -#: library/cwm/src/modules/CWMServiceStart.rb:255 -#: library/cwm/src/modules/CWMServiceStart.rb:267 -#: library/cwm/src/modules/CWMServiceStart.rb:314 +#. part of help text - radio button label, NO SHORTCUT!!! +#. part of help text - radio button label, NO SHORTCUT!!! +#. radio button +#: library/cwm/src/modules/CWMServiceStart.rb:255 +#: library/cwm/src/modules/CWMServiceStart.rb:267 +#: library/cwm/src/modules/CWMServiceStart.rb:314 msgid "During Boot" msgstr "부팅 중" -#. part of help text - radio button label, NO SHORTCUT!!! -#. part of help text - radio button label, NO SHORTCUT!!! -#. radio button -#: library/cwm/src/modules/CWMServiceStart.rb:257 -#: library/cwm/src/modules/CWMServiceStart.rb:269 -#: library/cwm/src/modules/CWMServiceStart.rb:321 +#. part of help text - radio button label, NO SHORTCUT!!! +#. part of help text - radio button label, NO SHORTCUT!!! +#. radio button +#: library/cwm/src/modules/CWMServiceStart.rb:257 +#: library/cwm/src/modules/CWMServiceStart.rb:269 +#: library/cwm/src/modules/CWMServiceStart.rb:321 msgid "Manually" msgstr "수동" -#. part of help text - radio button label, NO SHORTCUT!!! -#: library/cwm/src/modules/CWMServiceStart.rb:271 +#. part of help text - radio button label, NO SHORTCUT!!! +#: library/cwm/src/modules/CWMServiceStart.rb:271 msgid "Via xinetd" msgstr "Via xinetd" -#. radio button -#: library/cwm/src/modules/CWMServiceStart.rb:328 +#. radio button +#: library/cwm/src/modules/CWMServiceStart.rb:328 msgid "Via &xinetd" msgstr "Via xinetd(&X)" -#. frame -#: library/cwm/src/modules/CWMServiceStart.rb:373 +#. frame +#: library/cwm/src/modules/CWMServiceStart.rb:373 msgid "Service Start" msgstr "서비스 시작" -#. service status - label -#: library/cwm/src/modules/CWMServiceStart.rb:464 +#. service status - label +#: library/cwm/src/modules/CWMServiceStart.rb:464 msgid "Service is running" msgstr "서비스가 실행되고 있습니다." -#. service status - label -#: library/cwm/src/modules/CWMServiceStart.rb:470 +#. service status - label +#: library/cwm/src/modules/CWMServiceStart.rb:470 msgid "Service is not running" msgstr "서비스가 실행되고 있지 않습니다." -#. help text for service status displaying and switching widget 1/2 -#. %1 and %2 are push button labels -#. %1 is eg. "Start the Service Now" -#. %2 is eg. "Stop the Service Now" -#. (both without quotes) -#: library/cwm/src/modules/CWMServiceStart.rb:503 +#. help text for service status displaying and switching widget 1/2 +#. %1 and %2 are push button labels +#. %1 is eg. "Start the Service Now" +#. %2 is eg. "Stop the Service Now" +#. (both without quotes) +#: library/cwm/src/modules/CWMServiceStart.rb:503 msgid "" "<p><b><big>Switch On or Off</big></b><br>\n" "To start or stop the service immediately, use \n" @@ -607,11 +589,11 @@ "서비스를 즉시 시작하거나 중지하려면\n" " <b>%1</b> 또는 <b>%2</b>을(를) 사용하십시오.</p>" -#. help text for service start widget 2/2, optional -#. %3 is push button label, eg. "Save Changes and Restart Service Now" -#. (without quotes) -#. note: %3 is correct, do not replace with %1!!! -#: library/cwm/src/modules/CWMServiceStart.rb:515 +#. help text for service start widget 2/2, optional +#. %3 is push button label, eg. "Save Changes and Restart Service Now" +#. (without quotes) +#. note: %3 is correct, do not replace with %1!!! +#: library/cwm/src/modules/CWMServiceStart.rb:515 msgid "" "<p>To save all changes and restart the\n" "service immediately, use <b>%3</b>.</p>\n" @@ -619,49 +601,49 @@ "<p>모든 변경 사항을 저장하고 서비스를 즉시\n" "재시작하려면 <b>%3</b>을(를) 사용하십시오.</p>\n" -#. part of help text - push button label, NO SHORTCUT!!! -#: library/cwm/src/modules/CWMServiceStart.rb:530 +#. part of help text - push button label, NO SHORTCUT!!! +#: library/cwm/src/modules/CWMServiceStart.rb:530 msgid "Start the Service Now" msgstr "서비스 지금 시작" -#. part of help text - push button label, NO SHORTCUT!!! -#: library/cwm/src/modules/CWMServiceStart.rb:532 +#. part of help text - push button label, NO SHORTCUT!!! +#: library/cwm/src/modules/CWMServiceStart.rb:532 msgid "Stop the Service Now" msgstr "서비스 지금 중지" -#. part of help text - push button label, NO SHORTCUT!!! -#: library/cwm/src/modules/CWMServiceStart.rb:534 +#. part of help text - push button label, NO SHORTCUT!!! +#: library/cwm/src/modules/CWMServiceStart.rb:534 msgid "Save Changes and Restart Service Now" msgstr "변경 사항을 저장하고 서비스 지금 재시작" -#. push button for immediate service starting -#: library/cwm/src/modules/CWMServiceStart.rb:575 +#. push button for immediate service starting +#: library/cwm/src/modules/CWMServiceStart.rb:575 msgid "&Start the Service Now" msgstr "서비스 지금 시작(&S)" -#. push button for immediate service stopping -#: library/cwm/src/modules/CWMServiceStart.rb:582 +#. push button for immediate service stopping +#: library/cwm/src/modules/CWMServiceStart.rb:582 msgid "S&top the Service Now" msgstr "서비스 지금 중지(&T)" -#. push button for immediate saving of the settings and service starting -#: library/cwm/src/modules/CWMServiceStart.rb:589 +#. push button for immediate saving of the settings and service starting +#: library/cwm/src/modules/CWMServiceStart.rb:589 msgid "S&ave Changes and Restart Service Now" msgstr "변경 사항을 저장하고 서비스 지금 재시작(&A)" -#. Frame label (stoping starting service) -#: library/cwm/src/modules/CWMServiceStart.rb:612 +#. Frame label (stoping starting service) +#: library/cwm/src/modules/CWMServiceStart.rb:612 msgid "Switch On and Off" msgstr "설정/해제" -#. Current status -#: library/cwm/src/modules/CWMServiceStart.rb:618 +#. Current status +#: library/cwm/src/modules/CWMServiceStart.rb:618 msgid "Current Status: " msgstr "현재 상태: " -#. help text for LDAP enablement widget -#. %1 is button label, eg. "LDAP Support Active" (without quotes) -#: library/cwm/src/modules/CWMServiceStart.rb:728 +#. help text for LDAP enablement widget +#. %1 is button label, eg. "LDAP Support Active" (without quotes) +#: library/cwm/src/modules/CWMServiceStart.rb:728 msgid "" "<p><b><big>LDAP Support</big></b><br>\n" "To store the settings in LDAP instead of native configuration files,\n" @@ -671,39 +653,39 @@ "고유 구성 파일 대신 LDAP에 설정을 저장하려면\n" " <b>%1</b>을(를) 설정하십시오.</p>" -#. part of help text - check box label, NO SHORTCUT!!! -#: library/cwm/src/modules/CWMServiceStart.rb:741 +#. part of help text - check box label, NO SHORTCUT!!! +#: library/cwm/src/modules/CWMServiceStart.rb:741 msgid "LDAP Support Active" msgstr "LDAP 지원 활성화" -#. check box -#: library/cwm/src/modules/CWMServiceStart.rb:769 +#. check box +#: library/cwm/src/modules/CWMServiceStart.rb:769 msgid "&LDAP Support Active" msgstr "LDAP 지원 활성화(&L)" -#. Fallback label for a tab if no is defined -#: library/cwm/src/modules/CWMTab.rb:48 +#. Fallback label for a tab if no is defined +#: library/cwm/src/modules/CWMTab.rb:48 msgid "Tab" msgstr "탭" -#. push button -#. push button -#. Button label -#: library/cwm/src/modules/CWMTable.rb:372 -#: library/cwm/src/modules/TablePopup.rb:940 -#: library/general/src/modules/Label.rb:166 +#. push button +#. push button +#. Button label +#: library/cwm/src/modules/CWMTable.rb:372 +#: library/cwm/src/modules/TablePopup.rb:940 +#: library/general/src/modules/Label.rb:166 msgid "&Up" msgstr "위로(&U)" -#. push button -#. push button -#: library/cwm/src/modules/CWMTable.rb:374 -#: library/cwm/src/modules/TablePopup.rb:942 +#. push button +#. push button +#: library/cwm/src/modules/CWMTable.rb:374 +#: library/cwm/src/modules/TablePopup.rb:942 msgid "&Down" msgstr "아래로(&D)" -#. popup message -#: library/cwm/src/modules/CWMTsigKeys.rb:302 +#. popup message +#: library/cwm/src/modules/CWMTsigKeys.rb:302 msgid "" "The selected TSIG key cannot be deleted,\n" "because it is in use.\n" @@ -713,38 +695,38 @@ "없습니다.\n" " 먼저 구성에서 사용을 중지하십시오." -#. popup title -#: library/cwm/src/modules/CWMTsigKeys.rb:308 +#. popup title +#: library/cwm/src/modules/CWMTsigKeys.rb:308 msgid "Cannot delete TSIG key." msgstr "TSIG 키를 삭제할 수 없습니다." -#. popup headline -#: library/cwm/src/modules/CWMTsigKeys.rb:318 +#. popup headline +#: library/cwm/src/modules/CWMTsigKeys.rb:318 msgid "Select File with the Authentication Key" msgstr "인증 키가 있는 파일 선택" -#. popup headline -#: library/cwm/src/modules/CWMTsigKeys.rb:333 +#. popup headline +#: library/cwm/src/modules/CWMTsigKeys.rb:333 msgid "Select File for the Authentication Key" msgstr "인증 키에 대한 파일 선택" -#. error report -#: library/cwm/src/modules/CWMTsigKeys.rb:353 +#. error report +#: library/cwm/src/modules/CWMTsigKeys.rb:353 msgid "Specified filename is an existing directory." msgstr "지정한 파일 이름은 기존 디렉토리입니다." -#. yes-no popup -#: library/cwm/src/modules/CWMTsigKeys.rb:358 +#. yes-no popup +#: library/cwm/src/modules/CWMTsigKeys.rb:358 msgid "Specified file exists. Rewrite it?" msgstr "지정된 파일이 있습니다. 다시 쓰시겠습니까?" -#. error report -#: library/cwm/src/modules/CWMTsigKeys.rb:366 +#. error report +#: library/cwm/src/modules/CWMTsigKeys.rb:366 msgid "The TSIG key ID was not specified." msgstr "TSIG 키 ID를 지정하지 않았습니다." -#. yes-no popup -#: library/cwm/src/modules/CWMTsigKeys.rb:373 +#. yes-no popup +#: library/cwm/src/modules/CWMTsigKeys.rb:373 msgid "" "The key with the specified ID exists and is used.\n" "Remove it?" @@ -752,8 +734,8 @@ "지정한 ID를 갖는 키는 존재하며 사용되고 있습니다.\n" "이를 제거하시겠습니까?" -#. yes-no popup -#: library/cwm/src/modules/CWMTsigKeys.rb:393 +#. yes-no popup +#: library/cwm/src/modules/CWMTsigKeys.rb:393 msgid "" "A key with the specified ID was found\n" "on your disk. Remove it?" @@ -761,28 +743,28 @@ "지정한 ID를 갖는 키를 디스크에서\n" "찾았습니다. 이를 제거하시겠습니까?" -#. yes-no popup -#: library/cwm/src/modules/CWMTsigKeys.rb:418 +#. yes-no popup +#: library/cwm/src/modules/CWMTsigKeys.rb:418 msgid "The key will be created now. Continue?" msgstr "키가 만들어집니다. 계속하시겠습니까?" -#. error report -#: library/cwm/src/modules/CWMTsigKeys.rb:434 +#. error report +#: library/cwm/src/modules/CWMTsigKeys.rb:434 msgid "Creating the TSIG key failed." msgstr "TSIG 키 작성에 실패했습니다." -#. message popup -#: library/cwm/src/modules/CWMTsigKeys.rb:444 +#. message popup +#: library/cwm/src/modules/CWMTsigKeys.rb:444 msgid "The specified file does not exist." msgstr "지정한 파일은 존재하지 않습니다." -#. message popup -#: library/cwm/src/modules/CWMTsigKeys.rb:450 +#. message popup +#: library/cwm/src/modules/CWMTsigKeys.rb:450 msgid "The specified file does not contain any TSIG key." msgstr "지정된 파일에 TSIG 키가 없습니다." -#. yes-no popup -#: library/cwm/src/modules/CWMTsigKeys.rb:460 +#. yes-no popup +#: library/cwm/src/modules/CWMTsigKeys.rb:460 msgid "" "The specified file contains a TSIG key with the same\n" "identifier as some of already present keys.\n" @@ -792,8 +774,8 @@ "같은 TSIG 키가 포함되어 있습니다.\n" "이전 키가 제거됩니다. 계속하시겠습니까?" -#. tsig keys management dialog help 1/4 -#: library/cwm/src/modules/CWMTsigKeys.rb:563 +#. tsig keys management dialog help 1/4 +#: library/cwm/src/modules/CWMTsigKeys.rb:563 msgid "" "<p><big><b>TSIG Key Management</b></big><br>\n" "Use this dialog to manage the TSIG keys.</p>\n" @@ -801,8 +783,8 @@ "<p><big><b>TSIG 키 관리</b></big><br>\n" "이 대화 상자를 사용하여 TSIG 키를 관리합니다.</p>\n" -#. tsig keys management dialog help 2/4 -#: library/cwm/src/modules/CWMTsigKeys.rb:567 +#. tsig keys management dialog help 2/4 +#: library/cwm/src/modules/CWMTsigKeys.rb:567 msgid "" "<p><big><b>Adding an Existing TSIG Key</b></big><br>\n" "To add an already created TSIG key, select a <b>Filename</b> of the file\n" @@ -812,8 +794,8 @@ "이미 작성된 TSIG 키를 추가하려면 키가 포함된 파일의 <b>파일 이름</b>을\n" " 선택하고 <b>추가</b>를 클릭하십시오.</p>\n" -#. tsig keys management dialog help 3/4 -#: library/cwm/src/modules/CWMTsigKeys.rb:573 +#. tsig keys management dialog help 3/4 +#: library/cwm/src/modules/CWMTsigKeys.rb:573 msgid "" "<p><big><b>Creating a New TSIG Key</b></big><br>\n" "To create a new TSIG key, set the <b>Filename</b> of the file in which to\n" @@ -825,8 +807,8 @@ " 키를 식별하기 위한 <b>키 ID</b>를 설정한 다음 <b>생성</b>을\n" " 클릭하십시오.</p>\n" -#. tsig keys management dialog help 4/4 -#: library/cwm/src/modules/CWMTsigKeys.rb:580 +#. tsig keys management dialog help 4/4 +#: library/cwm/src/modules/CWMTsigKeys.rb:580 msgid "" "<p><big><b>Removing a TSIG Key</b></big><br>\n" "To remove a configured TSIG key, select it and click <b>Delete</b>.\n" @@ -842,83 +824,83 @@ " 삭제할 수 없습니다. 먼저 서버의 구성에서 키의\n" " 사용을 중지해야 합니다.</p>\n" -#. Frame label - adding a created server key -#: library/cwm/src/modules/CWMTsigKeys.rb:592 +#. Frame label - adding a created server key +#: library/cwm/src/modules/CWMTsigKeys.rb:592 msgid "Add an Existing TSIG Key" msgstr "기존 TSIG 키 추가" -#. Frame label - creating a new server key -#: library/cwm/src/modules/CWMTsigKeys.rb:641 +#. Frame label - creating a new server key +#: library/cwm/src/modules/CWMTsigKeys.rb:641 msgid "Create a New TSIG Key" msgstr "새 TSIG 키 작성" -#. text entry -#: library/cwm/src/modules/CWMTsigKeys.rb:653 +#. text entry +#: library/cwm/src/modules/CWMTsigKeys.rb:653 msgid "&Key ID" msgstr "키 ID(&K)" -#. push button -#: library/cwm/src/modules/CWMTsigKeys.rb:685 +#. push button +#: library/cwm/src/modules/CWMTsigKeys.rb:685 msgid "&Generate" msgstr "생성(&G)" -#. Table header - in fact label -#: library/cwm/src/modules/CWMTsigKeys.rb:697 +#. Table header - in fact label +#: library/cwm/src/modules/CWMTsigKeys.rb:697 msgid "Current TSIG Keys" msgstr "현재 TSIG 키" -#. Table header item - DNS key listing -#. table header - GPG key ID -#. table header - GPG key ID -#. GnuPG key ID used as "Key ID: 1144AAAA444" -#: library/cwm/src/modules/CWMTsigKeys.rb:705 -#: library/gpg/src/modules/GPGWidgets.rb:192 -#: library/gpg/src/modules/GPGWidgets.rb:224 -#: library/packages/src/modules/SignatureCheckDialogs.rb:57 +#. Table header item - DNS key listing +#. table header - GPG key ID +#. table header - GPG key ID +#. GnuPG key ID used as "Key ID: 1144AAAA444" +#: library/cwm/src/modules/CWMTsigKeys.rb:705 +#: library/gpg/src/modules/GPGWidgets.rb:192 +#: library/gpg/src/modules/GPGWidgets.rb:224 +#: library/packages/src/modules/SignatureCheckDialogs.rb:57 msgid "Key ID" msgstr "키 ID" -#. Table header item - DNS key listing -#: library/cwm/src/modules/CWMTsigKeys.rb:707 +#. Table header item - DNS key listing +#: library/cwm/src/modules/CWMTsigKeys.rb:707 msgid "Filename" msgstr "파일 이름" -#. combobox header -#: library/cwm/src/modules/TablePopup.rb:484 +#. combobox header +#: library/cwm/src/modules/TablePopup.rb:484 msgid "&Selected Option" msgstr "선택된 옵션(&S)" -#. heading / label -#: library/cwm/src/modules/TablePopup.rb:533 +#. heading / label +#: library/cwm/src/modules/TablePopup.rb:533 msgid "Current Option: " msgstr "현재 설정:" -#. error report -#: library/cwm/src/modules/TablePopup.rb:717 +#. error report +#: library/cwm/src/modules/TablePopup.rb:717 msgid "The selected option is already present." msgstr "선택한 옵션은 이미 존재합니다." -#. table header, shortcut for changed, keep very short -#: library/cwm/src/modules/TablePopup.rb:882 +#. table header, shortcut for changed, keep very short +#: library/cwm/src/modules/TablePopup.rb:882 msgid "Ch." msgstr "Ch." -#. table header -#. table header -#: library/cwm/src/modules/TablePopup.rb:884 -#: library/cwm/src/modules/TablePopup.rb:891 +#. table header +#. table header +#: library/cwm/src/modules/TablePopup.rb:884 +#: library/cwm/src/modules/TablePopup.rb:891 msgid "Option" msgstr "옵션" -#. table header -#. table header -#: library/cwm/src/modules/TablePopup.rb:886 -#: library/cwm/src/modules/TablePopup.rb:893 +#. table header +#. table header +#: library/cwm/src/modules/TablePopup.rb:886 +#: library/cwm/src/modules/TablePopup.rb:893 msgid "Value" msgstr "값" -#. help 1/4 -#: library/cwm/src/modules/TablePopup.rb:899 +#. help 1/4 +#: library/cwm/src/modules/TablePopup.rb:899 msgid "" "<p><b><big>Editing the Settings</big></b><br>\n" "To edit the settings, choose the appropriate\n" @@ -928,8 +910,8 @@ "설정을 편집하려면 테이블에서 해당 항목을\n" "선택한 다음 <b>편집</b>을 클릭합니다.</p>" -#. help 2/4, optional -#: library/cwm/src/modules/TablePopup.rb:908 +#. help 2/4, optional +#: library/cwm/src/modules/TablePopup.rb:908 msgid "" "<p>To add a new option, click <b>Add</b>. To remove\n" "an option, select it and click <b>Delete</b>.</p>" @@ -937,8 +919,8 @@ "<P> 새로운 옵션 추가하기 위해서, <b>추가</b>를 클릭하십시오. 그 옵션\n" "을 제거하기 위해서, 그것을 선택하거나 <b>삭제</b>을 클릭 하십시오.</P>" -#. help 3/4, optional -#: library/cwm/src/modules/TablePopup.rb:918 +#. help 3/4, optional +#: library/cwm/src/modules/TablePopup.rb:918 msgid "" "<P>The <B>Ch.</B> column of the table shows \n" "whether the option was changed.</P>" @@ -946,8 +928,8 @@ "<P>테이블의 <B>Ch.</B> 열은 옵션이 변경되었는지를 \n" "표시합니다.</P>" -#. help 4/4, optional -#: library/cwm/src/modules/TablePopup.rb:928 +#. help 4/4, optional +#: library/cwm/src/modules/TablePopup.rb:928 msgid "" "<p>To reorder the options, select an option\n" "and use <b>Up</b> and <b>Down</b> to move it up or down\n" @@ -957,39 +939,39 @@ "<b>위</b>와 <b>아래</b>를 사용하여 목록에서 옵션을 위 또는 아래로\n" " 이동합니다.</p>" -#. menu button -#: library/cwm/src/modules/WizardHW.rb:204 +#. menu button +#: library/cwm/src/modules/WizardHW.rb:204 msgid "&Other" msgstr "기타(&O)" -#. translators: message for hardware configuration without any configured -#. device -#: library/cwm/src/modules/WizardHW.rb:504 +#. translators: message for hardware configuration without any configured +#. device +#: library/cwm/src/modules/WizardHW.rb:504 msgid "The device is not configured" msgstr "장치가 구성되지 않았습니다." -#. translators: message for hardware configuration without any configured -#. device -#: library/cwm/src/modules/WizardHW.rb:507 +#. translators: message for hardware configuration without any configured +#. device +#: library/cwm/src/modules/WizardHW.rb:507 msgid "Press <B>Edit</B> to configure" msgstr "구성하려면 <B>편집</B>을 누르십시오." -#. Message shown while loading modules information -#: library/desktop/src/clients/menu.rb:197 +#. Message shown while loading modules information +#: library/desktop/src/clients/menu.rb:197 msgid "Loading modules, please wait ..." msgstr "모듈 로딩중, 잠시 기다리십시오 ..." -#. Heading for NCurses Control Center -#: library/desktop/src/clients/menu.rb:224 +#. Heading for NCurses Control Center +#: library/desktop/src/clients/menu.rb:224 msgid "YaST Control Center" msgstr "YaST Control Center" -#: library/desktop/src/clients/menu.rb:262 +#: library/desktop/src/clients/menu.rb:262 msgid "Run" msgstr "실행" -#. show popup when running as non-root -#: library/desktop/src/clients/menu.rb:273 +#. show popup when running as non-root +#: library/desktop/src/clients/menu.rb:273 msgid "" "YaST2 Control Center is not running as root.\n" "You can only see modules that do not require root privileges." @@ -997,13 +979,13 @@ "YaST2 관리 센터가 루트로 실행되고 있지 않습니다.\n" "루트 권한이 필요하지 않은 모듈만 표시됩니다." -#. NCurses (textmode) Control Center headline -#: library/desktop/src/clients/menu.rb:320 +#. NCurses (textmode) Control Center headline +#: library/desktop/src/clients/menu.rb:320 msgid "Controlling YaST ncurses with the Keyboard" msgstr "키보드로 YaST ncurses 제어" -#. NCurses Control Center help 1/ -#: library/desktop/src/clients/menu.rb:323 +#. NCurses Control Center help 1/ +#: library/desktop/src/clients/menu.rb:323 msgid "" "<p>1) <i>General</i><br>\n" "Navigate through the dialog elements with [TAB] to go to\n" @@ -1017,21 +999,13 @@ "스페이스바 또는 Enter 키를 사용하여 요소를 선택하거나 활성화합니다.\n" "일부 요소는 화살표 키를 사용합니다(예: 목록에서 스크롤하는 경우).</p>" -#. NCurses Control Center help 2/10 -#: library/desktop/src/clients/menu.rb:331 -msgid "" -"<p>Tree navigation is also done by arrow keys. To open or close a branch use " -"[SPACE]. For modules showing a tree (might look like a list) of " -"configuration items on the left side use [ENTER] to get corresponding dialog " -"on the right.</p>" -msgstr "" -"<p>화살표 키를 통해 트리를 탐색할 수도 있습니다. 분기를 열거나 닫으려면 스페" -"이스키를 사용하십시오. 왼쪽에 구성 항목 트리(목록처럼 표시될 수도 있음)가 표" -"시되는 모듈의 경우 오른쪽에 해당 대화 상자를 표시하려면 <Enter> 키를 사용하십" -"시오.</p>" +#. NCurses Control Center help 2/10 +#: library/desktop/src/clients/menu.rb:331 +msgid "<p>Tree navigation is also done by arrow keys. To open or close a branch use [SPACE]. For modules showing a tree (might look like a list) of configuration items on the left side use [ENTER] to get corresponding dialog on the right.</p>" +msgstr "<p>화살표 키를 통해 트리를 탐색할 수도 있습니다. 분기를 열거나 닫으려면 스페이스키를 사용하십시오. 왼쪽에 구성 항목 트리(목록처럼 표시될 수도 있음)가 표시되는 모듈의 경우 오른쪽에 해당 대화 상자를 표시하려면 <Enter> 키를 사용하십시오.</p>" -#. NCurses Control Center help 3/10 -#: library/desktop/src/clients/menu.rb:338 +#. NCurses Control Center help 3/10 +#: library/desktop/src/clients/menu.rb:338 msgid "" "<p>Buttons are equipped with shortcut keys (the highlighted\n" "letter). Use [ALT] and the letter to activate the button.</p>" @@ -1039,8 +1013,8 @@ "<p>버튼에는 바로 가기 키(강조 표시된 문자)가 포함되어 있습니다.\n" "특정 버튼을 활성화하려면 Alt 키와 해당 문자를 함께 사용하십시오.</p>" -#. NCurses Control Center help 4/10 -#: library/desktop/src/clients/menu.rb:342 +#. NCurses Control Center help 4/10 +#: library/desktop/src/clients/menu.rb:342 msgid "" "<p>Press [ESC] to close selection pop-ups (e.g., from\n" "menu buttons) without choosing anything.</p>\n" @@ -1048,8 +1022,8 @@ "<p>다른 항목을 선택하지 않고 선택 팝업(예: 메뉴 버튼)을\n" "닫으려면 Esc 키를 누르십시오.</p>\n" -#. NCurses Control Center help 5/10 -#: library/desktop/src/clients/menu.rb:346 +#. NCurses Control Center help 5/10 +#: library/desktop/src/clients/menu.rb:346 msgid "" "<p>2) <i>Substitution of Keystrokes</i><br>\n" "<p>Because the environment can affect the use of the keyboard,\n" @@ -1063,8 +1037,8 @@ "Tab 키 및 Shift + Tab(또는 Alt + Tab)이 동작하지 않으면\n" "Ctrl + F 및 Ctrl + B를 사용하여 포커스를 각각 앞뒤로 이동하십시오.</p>" -#. NCurses Control Center help 6/10 -#: library/desktop/src/clients/menu.rb:354 +#. NCurses Control Center help 6/10 +#: library/desktop/src/clients/menu.rb:354 msgid "" "<p>If [ALT] + [letter] does not work,\n" "try [ESC] + [letter]. Example: [ESC] + [H] for [ALT] + [H].\n" @@ -1074,24 +1048,22 @@ "눌러 보십시오. 예를 들어 Alt + H 대신 Esc + H를 사용할 수 있습니다.\n" "또한 Esc + Tab을 Alt + Tab 대신 사용할 수도 있습니다.</p>" -#. NCurses Control Center help 7/10 -#: library/desktop/src/clients/menu.rb:360 +#. NCurses Control Center help 7/10 +#: library/desktop/src/clients/menu.rb:360 msgid "" "<p>3) <i>Function Keys</i><br>\n" -"F keys provide a quick access to main functions. The function key bindings " -"for the current dialog are shown in the bottom line.</p>" +"F keys provide a quick access to main functions. The function key bindings for the current dialog are shown in the bottom line.</p>" msgstr "" "<p>3) <i>기능 키</i><br>\n" -"F 키를 사용하면 주 기능에 빠르게 액세스할 수 있습니다. 현재 대화 상자에 대한 " -"기능 키 바인딩이 맨 아래 줄에 표시됩니다.</p>" +"F 키를 사용하면 주 기능에 빠르게 액세스할 수 있습니다. 현재 대화 상자에 대한 기능 키 바인딩이 맨 아래 줄에 표시됩니다.</p>" -#. NCurses Control Center help 8/10 -#: library/desktop/src/clients/menu.rb:367 +#. NCurses Control Center help 8/10 +#: library/desktop/src/clients/menu.rb:367 msgid "<p>The F keys are usually connected to a certain action:</p>" msgstr "<p>F 키는 일반적으로 특정 동작에 연결됩니다.</p>" -#. NCurses Control Center help 9/10 -#: library/desktop/src/clients/menu.rb:369 +#. NCurses Control Center help 9/10 +#: library/desktop/src/clients/menu.rb:369 msgid "" "F1 = Help<br>\n" "F2 = Info or Description<br>\n" @@ -1115,8 +1087,8 @@ "F9 = 중단 또는 취소<br>\n" "F10 = 확인, 다음, 완료 또는 적용<br>" -#. NCurses Control Center help 10/10 -#: library/desktop/src/clients/menu.rb:382 +#. NCurses Control Center help 10/10 +#: library/desktop/src/clients/menu.rb:382 msgid "" "<p>In some environments, all or some\n" "F keys are not available.</p>" @@ -1124,91 +1096,81 @@ "<p>몇몇 환경에서는 F 키 전체 또는 일부를\n" "사용할 수 없습니다.</p>" -#. @param service [Object] An object providing the following methods: -#. #name, #start, #stop, #enabled?, #running? -#. For systemd compliant services, just do -#. Yast::SystemdService.find("name_of_the_service") -#. Note that this widget will #start and #stop the service by itself but -#. the actions referenced by the flags (reloading and enabling/disabling) -#. are expected to be done by the caller, when the whole configuration is -#. written. -#. @param reload_flag [Boolean] Initial value for the "reload" checkbox. -#. Keep in mind it will always be displayed as unchecked if the service -#. is not running, despite the real value. -#. @param reload_flag_label [Symbol] Type of label for the "reload" checkbox. -#. :reload means the service will be reloaded. -#. :restart means the service will be restarted. -#: library/general/src/lib/ui/service_status.rb:59 +#. @param service [Object] An object providing the following methods: +#. #name, #start, #stop, #enabled?, #running? +#. For systemd compliant services, just do +#. Yast::SystemdService.find("name_of_the_service") +#. Note that this widget will #start and #stop the service by itself but +#. the actions referenced by the flags (reloading and enabling/disabling) +#. are expected to be done by the caller, when the whole configuration is +#. written. +#. @param reload_flag [Boolean] Initial value for the "reload" checkbox. +#. Keep in mind it will always be displayed as unchecked if the service +#. is not running, despite the real value. +#. @param reload_flag_label [Symbol] Type of label for the "reload" checkbox. +#. :reload means the service will be reloaded. +#. :restart means the service will be restarted. +#: library/general/src/lib/ui/service_status.rb:59 msgid "Restart After Saving Settings" msgstr "설정 저장 후 재시작" -#: library/general/src/lib/ui/service_status.rb:61 +#: library/general/src/lib/ui/service_status.rb:61 msgid "Reload After Saving Settings" msgstr "설정 저장 후 다시 읽기" -#. @return [YaST::Term] -#: library/general/src/lib/ui/service_status.rb:68 +#. @return [YaST::Term] +#: library/general/src/lib/ui/service_status.rb:68 msgid "Service Status" msgstr "서비스 상태" -#. Content for the help -#: library/general/src/lib/ui/service_status.rb:129 +#. Content for the help +#: library/general/src/lib/ui/service_status.rb:129 msgid "" "<p><b><big>Current status</big></b><br>\n" -"Displays the current status of the service. The status will remain the same " -"after saving the settings, independently of the value of 'start service " -"during boot'.</p>\n" +"Displays the current status of the service. The status will remain the same after saving the settings, independently of the value of 'start service during boot'.</p>\n" "<p><b><big>%{reload_label}</big></b><br>\n" -"Only applicable if the service is currently running. Ensures the running " -"service reloads the new configuration after saving it (either finishing the " -"dialog or pressing the apply button).</p>\n" +"Only applicable if the service is currently running. Ensures the running service reloads the new configuration after saving it (either finishing the dialog or pressing the apply button).</p>\n" "<p><b><big>Start During System Boot</big></b><br>\n" -"Check this field to enable the service at system boot. Un-check it to " -"disable the service. This does not affect the current status of the service " -"in the already running system.</p>\n" +"Check this field to enable the service at system boot. Un-check it to disable the service. This does not affect the current status of the service in the already running system.</p>\n" msgstr "" "<p><b><big>현재 상태</big></b><br>\n" -"서비스의 현재 상태를 표시합니다. 'start service during boot'의 값과 상관없이 " -"설정 저장 후 상태가 그대로 유지됩니다.</p>\n" +"서비스의 현재 상태를 표시합니다. 'start service during boot'의 값과 상관없이 설정 저장 후 상태가 그대로 유지됩니다.</p>\n" "<p><b><big>%{reload_label}</big></b><br>\n" -"서비스가 현재 실행 중일 때만 적용 가능합니다. 실행 중인 서비스가 저장 후 새로" -"운 구성을 다시 읽도록 합니다(대화상자를 마치거나 [적용] 버튼을 누름).</p>\n" +"서비스가 현재 실행 중일 때만 적용 가능합니다. 실행 중인 서비스가 저장 후 새로운 구성을 다시 읽도록 합니다(대화상자를 마치거나 [적용] 버튼을 누름).</p>\n" "<p><b><big>시스템 부팅 중 시작</big></b><br>\n" -"시스템 부팅 시 서비스를 활성화하려면 이 필드를 선택합니다. 서비스를 비활성화" -"하려면 선택을 취소합니다. 이미 실행 중인 시스템의 현재 서비스 상태에는 영향" -"을 주지 않습니다.</p>\n" +"시스템 부팅 시 서비스를 활성화하려면 이 필드를 선택합니다. 서비스를 비활성화하려면 선택을 취소합니다. 이미 실행 중인 시스템의 현재 서비스 상태에는 영향을 주지 않습니다.</p>\n" -#. Widget displaying the status and associated buttons -#: library/general/src/lib/ui/service_status.rb:155 +#. Widget displaying the status and associated buttons +#: library/general/src/lib/ui/service_status.rb:155 msgid "Current status:" msgstr "현재 상태:" -#. Widget to configure the status on boot -#: library/general/src/lib/ui/service_status.rb:168 +#. Widget to configure the status on boot +#: library/general/src/lib/ui/service_status.rb:168 msgid "Start During System Boot" msgstr "시스템 부팅 중 시작" -#. TRANSLATORS: status of a service -#: library/general/src/lib/ui/service_status.rb:192 +#. TRANSLATORS: status of a service +#: library/general/src/lib/ui/service_status.rb:192 msgid "running" msgstr "실행 중" -#: library/general/src/lib/ui/service_status.rb:194 +#: library/general/src/lib/ui/service_status.rb:194 msgid "Stop now" msgstr "지금 정지" -#. TRANSLATORS: status of a service -#: library/general/src/lib/ui/service_status.rb:199 +#. TRANSLATORS: status of a service +#: library/general/src/lib/ui/service_status.rb:199 msgid "stopped" msgstr "정지됨" -#: library/general/src/lib/ui/service_status.rb:201 +#: library/general/src/lib/ui/service_status.rb:201 msgid "Start now" msgstr "지금 시작" -#. TRANSLATORS: popup question (with continue / cancel buttons) -#. %1 is the filesystem path -#: library/general/src/modules/FileUtils.rb:287 +#. TRANSLATORS: popup question (with continue / cancel buttons) +#. %1 is the filesystem path +#: library/general/src/modules/FileUtils.rb:287 msgid "" "Although the path %1 exists, it is not a directory.\n" "Continue or cancel the operation?\n" @@ -1216,9 +1178,9 @@ "%1 경로가 존재하지만 디렉토리가 아닙니다.\n" "작업을 계속하시겠습니까 아니면 취소하시겠습니까?\n" -#. TRANSLATORS: question popup (with yes / no buttons). A user entered non-existent path -#. for a share, %1 is entered path -#: library/general/src/modules/FileUtils.rb:300 +#. TRANSLATORS: question popup (with yes / no buttons). A user entered non-existent path +#. for a share, %1 is entered path +#: library/general/src/modules/FileUtils.rb:300 msgid "" "The path %1 does not exist.\n" "Create it now?\n" @@ -1226,9 +1188,9 @@ "%1 경로가 없습니다.\n" "지금 만드시겠습니까?\n" -#. TRANSLATORS: popup question (with continue / cancel buttons) -#. %1 is the name (path) of the directory -#: library/general/src/modules/FileUtils.rb:319 +#. TRANSLATORS: popup question (with continue / cancel buttons) +#. %1 is the name (path) of the directory +#: library/general/src/modules/FileUtils.rb:319 msgid "" "Failed to create the directory %1.\n" "Continue or cancel the current operation?\n" @@ -1236,225 +1198,225 @@ "%1 디렉토리를 만들지 못했습니다.\n" "현재 작업을 계속하시겠습니까 아니면 취소하시겠습니까?\n" -#. Button label -#: library/general/src/modules/Label.rb:46 +#. Button label +#: library/general/src/modules/Label.rb:46 msgid "&Add" msgstr "추가(&A)" -#. Button label -#: library/general/src/modules/Label.rb:52 +#. Button label +#: library/general/src/modules/Label.rb:52 msgid "&Cancel" msgstr "취소(&C)" -#. Button label -#: library/general/src/modules/Label.rb:58 +#. Button label +#: library/general/src/modules/Label.rb:58 msgid "C&ontinue" msgstr "계속(&O)" -#. Button label -#: library/general/src/modules/Label.rb:64 +#. Button label +#: library/general/src/modules/Label.rb:64 msgid "&Yes" msgstr "예(&Y)" -#. Button label -#: library/general/src/modules/Label.rb:70 +#. Button label +#: library/general/src/modules/Label.rb:70 msgid "&No" msgstr "아니오(&N)" -#. Button label -#: library/general/src/modules/Label.rb:76 +#. Button label +#: library/general/src/modules/Label.rb:76 msgid "&Finish" msgstr "완료(&F)" -#. Button label -#: library/general/src/modules/Label.rb:82 +#. Button label +#: library/general/src/modules/Label.rb:82 msgid "Ed&it" msgstr "편집(&I)" -#. Button label -#: library/general/src/modules/Label.rb:88 +#. Button label +#: library/general/src/modules/Label.rb:88 msgid "&OK" msgstr "확인(&O)" -#. Button label -#: library/general/src/modules/Label.rb:94 +#. Button label +#: library/general/src/modules/Label.rb:94 msgid "Abo&rt" msgstr "중단(&R)" -#. Button label -#: library/general/src/modules/Label.rb:100 +#. Button label +#: library/general/src/modules/Label.rb:100 msgid "Abo&rt Installation" msgstr "설치 취소(&R)" -#. Button label -#: library/general/src/modules/Label.rb:106 +#. Button label +#: library/general/src/modules/Label.rb:106 msgid "&Ignore" msgstr "무시(&I)" -#. Button label -#: library/general/src/modules/Label.rb:112 +#. Button label +#: library/general/src/modules/Label.rb:112 msgid "&Next" msgstr "다음(&N)" -#. Button label -#: library/general/src/modules/Label.rb:118 +#. Button label +#: library/general/src/modules/Label.rb:118 msgid "Ne&w" msgstr "추가(&W)" -#. Button label -#: library/general/src/modules/Label.rb:124 +#. Button label +#: library/general/src/modules/Label.rb:124 msgid "Dele&te" msgstr "삭제(&T)" -#. Button label -#: library/general/src/modules/Label.rb:130 +#. Button label +#: library/general/src/modules/Label.rb:130 msgid "&Back" msgstr "뒤로(&B)" -#. Button label -#: library/general/src/modules/Label.rb:136 +#. Button label +#: library/general/src/modules/Label.rb:136 msgid "&Accept" msgstr "적용(&A)" -#. Button label -#: library/general/src/modules/Label.rb:142 +#. Button label +#: library/general/src/modules/Label.rb:142 msgid "&Do Not Accept" msgstr "거부(&D)" -#. Button label -#: library/general/src/modules/Label.rb:148 +#. Button label +#: library/general/src/modules/Label.rb:148 msgid "&Quit" msgstr "끝내기(&Q)" -#. Button label -#: library/general/src/modules/Label.rb:154 +#. Button label +#: library/general/src/modules/Label.rb:154 msgid "Retr&y" msgstr "재시도(&Y)" -#. Button label -#: library/general/src/modules/Label.rb:160 +#. Button label +#: library/general/src/modules/Label.rb:160 msgid "&Replace" msgstr "바꾸기(&R)" -#. Button label -#: library/general/src/modules/Label.rb:172 +#. Button label +#: library/general/src/modules/Label.rb:172 msgid "Do&wn" msgstr "아래(&W)" -#. Button label -#: library/general/src/modules/Label.rb:178 +#. Button label +#: library/general/src/modules/Label.rb:178 msgid "Sele&ct" msgstr "선택(&C)" -#. Button label -#: library/general/src/modules/Label.rb:184 +#. Button label +#: library/general/src/modules/Label.rb:184 msgid "Remo&ve" msgstr "제거(&V)" -#. Button label -#: library/general/src/modules/Label.rb:190 +#. Button label +#: library/general/src/modules/Label.rb:190 msgid "&Refresh" msgstr "새로 고침(&R)" -#. Button label -#: library/general/src/modules/Label.rb:196 +#. Button label +#: library/general/src/modules/Label.rb:196 msgid "&Help" msgstr "도움말(&H)" -#. Button label -#: library/general/src/modules/Label.rb:202 +#. Button label +#: library/general/src/modules/Label.rb:202 msgid "&Install" msgstr "설치(&I)" -#. Button label -#: library/general/src/modules/Label.rb:208 +#. Button label +#: library/general/src/modules/Label.rb:208 msgid "&Do Not Install" msgstr "설치하지 않음(&D)" -#. Button label -#: library/general/src/modules/Label.rb:214 +#. Button label +#: library/general/src/modules/Label.rb:214 msgid "&Download" msgstr "내려받기(&D)" -#. Button label -#: library/general/src/modules/Label.rb:220 +#. Button label +#: library/general/src/modules/Label.rb:220 msgid "&Save" msgstr "저장(&S)" -#. Button label -#: library/general/src/modules/Label.rb:226 +#. Button label +#: library/general/src/modules/Label.rb:226 msgid "&Stop" msgstr "중지(&S)" -#. Button label -#: library/general/src/modules/Label.rb:232 +#. Button label +#: library/general/src/modules/Label.rb:232 msgid "C&lose" msgstr "닫기(&L)" -#. Button label -#: library/general/src/modules/Label.rb:238 +#. Button label +#: library/general/src/modules/Label.rb:238 msgid "Bro&wse..." msgstr "찾아보기(&W)..." -#. Button label -#: library/general/src/modules/Label.rb:244 +#. Button label +#: library/general/src/modules/Label.rb:244 msgid "Crea&te" msgstr "생성(&T)" -#. Button label -#. push button label during media change popup, user can skip -#. this media (CD) so no packages from this media will be installed -#. PushButton label -#: library/general/src/modules/Label.rb:250 -#: library/packages/src/modules/PackageCallbacks.rb:665 -#: library/wizard/src/modules/Confirm.rb:126 +#. Button label +#. push button label during media change popup, user can skip +#. this media (CD) so no packages from this media will be installed +#. PushButton label +#: library/general/src/modules/Label.rb:250 +#: library/packages/src/modules/PackageCallbacks.rb:665 +#: library/wizard/src/modules/Confirm.rb:126 msgid "&Skip" msgstr "생략(&S)" -#. this string is usually used as headline of a popup -#: library/general/src/modules/Label.rb:262 +#. this string is usually used as headline of a popup +#: library/general/src/modules/Label.rb:262 msgid "Error" msgstr "에러" -#. this string is usually used as headline of a popup -#: library/general/src/modules/Label.rb:268 +#. this string is usually used as headline of a popup +#: library/general/src/modules/Label.rb:268 msgid "Please wait..." msgstr "잠시 기다리십시오..." -#. TextEntry Label -#: library/general/src/modules/Label.rb:313 +#. TextEntry Label +#: library/general/src/modules/Label.rb:313 msgid "&Filename" msgstr "파일 이름(&F)" -#. TextEntry Label -#. textentry label -#: library/general/src/modules/Label.rb:319 -#: library/packages/src/modules/PackageCallbacks.rb:2221 +#. TextEntry Label +#. textentry label +#: library/general/src/modules/Label.rb:319 +#: library/packages/src/modules/PackageCallbacks.rb:2221 msgid "&Password" msgstr "비밀번호(&P)" -#. TextEntry Label -#: library/general/src/modules/Label.rb:325 +#. TextEntry Label +#: library/general/src/modules/Label.rb:325 msgid "C&onfirm Password" msgstr "비밀번호 확인(&O)" -#. TextEntry Label -#: library/general/src/modules/Label.rb:331 +#. TextEntry Label +#: library/general/src/modules/Label.rb:331 msgid "&Port" msgstr "포트(&P)" -#. TextEntry Label -#: library/general/src/modules/Label.rb:337 +#. TextEntry Label +#: library/general/src/modules/Label.rb:337 msgid "&Hostname" msgstr "호스트 이름(&H)" -#. TextEntry Label -#: library/general/src/modules/Label.rb:343 +#. TextEntry Label +#: library/general/src/modules/Label.rb:343 msgid "&Options" msgstr "옵션(&O)" -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:46 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:46 msgid "" "YaST cannot continue the configuration\n" "without installing the required packages." @@ -1462,34 +1424,34 @@ "필요한 패키지를 설치하지 않으면 YaST에서\n" "구성 작업을 계속 진행할 수 없습니다." -#. TRANSLATORS: Popup message, %1 is a service name like "smbd" -#: library/general/src/modules/Message.rb:56 +#. TRANSLATORS: Popup message, %1 is a service name like "smbd" +#: library/general/src/modules/Message.rb:56 msgid "Cannot start '%1' service" msgstr "'%1' 서비스를 시작할 수 없습니다." -#. TRANSLATORS: Popup message, %1 is a service name like "smbd" -#: library/general/src/modules/Message.rb:64 +#. TRANSLATORS: Popup message, %1 is a service name like "smbd" +#: library/general/src/modules/Message.rb:64 msgid "Cannot restart '%1' service" msgstr "'%1' 서비스를 재시작할 수 없습니다." -#. TRANSLATORS: Popup message, %1 is a service name like "smbd" -#: library/general/src/modules/Message.rb:72 +#. TRANSLATORS: Popup message, %1 is a service name like "smbd" +#: library/general/src/modules/Message.rb:72 msgid "Cannot stop '%1' service" msgstr "'%1' 서비스를 중지할 수 없습니다." -#. TRANSLATORS: Popup message, %1 is file or service name like "/tmp/out" or "LDAP" -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English filename -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:83 +#. TRANSLATORS: Popup message, %1 is file or service name like "/tmp/out" or "LDAP" +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English filename +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:83 msgid "Cannot write settings to '%1'" msgstr "'%1'에 설정을 기록할 수 없습니다." -#. TRANSLATORS: Popup message, %1 is file or service name like "/tmp/out" or "LDAP", %2 is the reason of error -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English filename -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:96 +#. TRANSLATORS: Popup message, %1 is file or service name like "/tmp/out" or "LDAP", %2 is the reason of error +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English filename +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:96 msgid "" "Cannot write settings to '%1'.\n" "\n" @@ -1499,19 +1461,19 @@ "\n" " 이유: %2" -#. TRANSLATORS: Popup message, %1 is a file name like "/tmp/out" -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English filename -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:114 +#. TRANSLATORS: Popup message, %1 is a file name like "/tmp/out" +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English filename +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:114 msgid "Error writing file '%1'" msgstr "'%1' 파일 기록 오류" -#. TRANSLATORS: Popup message, %1 is a file name like "/tmp/out", %2 is the reason of error -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English filename -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:127 +#. TRANSLATORS: Popup message, %1 is a file name like "/tmp/out", %2 is the reason of error +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English filename +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:127 msgid "" "Error writing file '%1'.\n" "\n" @@ -1521,19 +1483,19 @@ "\n" " 이유: %2" -#. TRANSLATORS: Popup message, %1 is the name of file like "/tmp/in" -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English filename -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:141 +#. TRANSLATORS: Popup message, %1 is the name of file like "/tmp/in" +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English filename +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:141 msgid "Cannot open file '%1'" msgstr "'%1' 파일을 열 수 없습니다." -#. TRANSLATORS: Popup message, %1 is the name of file like "/tmp/in", %2 is the reason of error -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English filename -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:153 +#. TRANSLATORS: Popup message, %1 is the name of file like "/tmp/in", %2 is the reason of error +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English filename +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:153 msgid "" "Cannot open file '%1'.\n" "\n" @@ -1543,18 +1505,18 @@ "\n" " 이유: %2" -#. TRANSLATORS: Progress stage text -#: library/general/src/modules/Message.rb:160 +#. TRANSLATORS: Progress stage text +#: library/general/src/modules/Message.rb:160 msgid "Finished" msgstr "완료됨" -#. TRANSLATORS: Progress stage text -#: library/general/src/modules/Message.rb:167 +#. TRANSLATORS: Progress stage text +#: library/general/src/modules/Message.rb:167 msgid "Check the environment" msgstr "환경 검사." -#. TRANSLATORS: Popup message, %1 is the description of error -#: library/general/src/modules/Message.rb:175 +#. TRANSLATORS: Popup message, %1 is the description of error +#: library/general/src/modules/Message.rb:175 msgid "" "Unknown Error.\n" "\n" @@ -1564,16 +1526,16 @@ "\n" " 설명: %1" -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:182 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:182 msgid "This item must be completed." msgstr "이 항목은 완료해야 합니다." -#. TRANSLATORS: Popup question -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English directory -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:193 +#. TRANSLATORS: Popup question +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English directory +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:193 msgid "" "The directory '%1' does not exist.\n" "Create it?" @@ -1581,8 +1543,8 @@ "'%1' 디렉토리는 존재하지 않습니다.\n" "디렉토리를 만드시겠습니까?" -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:203 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:203 msgid "" "The domain has changed.\n" "You must reboot for the changes to take effect." @@ -1590,85 +1552,85 @@ "도메인이 변경되었습니다.\n" "시스템에 적용하려면 시스템을 재부팅해야합니다" -#. TRANSLATORS: CheckBox / Button -#: library/general/src/modules/Message.rb:212 +#. TRANSLATORS: CheckBox / Button +#: library/general/src/modules/Message.rb:212 msgid "Do Not Show This Message &Again" msgstr "다시 이 메시지를 표시하지 않습니다.(&A)" -#. TRANSLATORS: Popup message, %1 is a service name like "smbd" -#: library/general/src/modules/Message.rb:220 +#. TRANSLATORS: Popup message, %1 is a service name like "smbd" +#: library/general/src/modules/Message.rb:220 msgid "Cannot adjust '%1' service." msgstr "'%1'서비스는 조절할 수 없습니다." -#. TRANSLATORS: Popup message, %1 is a missing-parameter name -#: library/general/src/modules/Message.rb:228 +#. TRANSLATORS: Popup message, %1 is a missing-parameter name +#: library/general/src/modules/Message.rb:228 msgid "Missing parameter '%1'." msgstr "'%1' 매개변수가 누락되었습니다." -#. TRANSLATORS: Popup message, %1 is a directory name -#. For Right-To-Left languages, you want to put %1 into its own empty line so -#. the text renderer doesn't get trip with the English directory -#. (see BNC #584466 for details) -#: library/general/src/modules/Message.rb:239 +#. TRANSLATORS: Popup message, %1 is a directory name +#. For Right-To-Left languages, you want to put %1 into its own empty line so +#. the text renderer doesn't get trip with the English directory +#. (see BNC #584466 for details) +#: library/general/src/modules/Message.rb:239 msgid "Cannot create directory '%1'." msgstr "'%1' 디렉토리를 만들 수 없습니다." -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:246 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:246 msgid "Cannot read current settings." msgstr "현재 설정을 읽을 수 없습니다." -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:253 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:253 msgid "SuSEconfig script failed." msgstr "SuSEconfig 스크립트가 실패되었습니다." -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:260 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:260 msgid "Failed to install required packages." msgstr "필요한 패키지들의 설치를 실패했습니다." -#. TRANSLATORS: Popup message -#: library/general/src/modules/Message.rb:265 +#. TRANSLATORS: Popup message +#: library/general/src/modules/Message.rb:265 msgid "Updating system configuration..." msgstr "시스템 구성 업데이트 중..." -#: library/general/src/modules/Message.rb:269 +#: library/general/src/modules/Message.rb:269 msgid "This may take a while." msgstr "이 작업은 시간이 걸릴 수도 있습니다." -#. Get information about the OS release -#. Throws exception Yast::OSReleaseFileMissingError if release file -#. is missing. -#. -#. @param [String] directory containing the installed system (/ in installed system) -#. @return [String] the release information -#: library/general/src/modules/OSRelease.rb:62 +#. Get information about the OS release +#. Throws exception Yast::OSReleaseFileMissingError if release file +#. is missing. +#. +#. @param [String] directory containing the installed system (/ in installed system) +#. @return [String] the release information +#: library/general/src/modules/OSRelease.rb:62 msgid "Release file %{file} not found" msgstr "%{file} 릴리스 파일을 찾을 수 없습니다." -#. Confirm user request to abort installation -#: library/general/src/modules/Popup.rb:733 +#. Confirm user request to abort installation +#: library/general/src/modules/Popup.rb:733 msgid "Really abort the installation?" msgstr "정말 설치를 중단하시겠습니까?" -#. Confirm user request to abort System Repair -#: library/general/src/modules/Popup.rb:742 +#. Confirm user request to abort System Repair +#: library/general/src/modules/Popup.rb:742 msgid "Really abort YaST System Repair?" msgstr "정말로 YaST 복구 시스템을 취소하시겠습니까?" -#. Button that will really abort the repair -#: library/general/src/modules/Popup.rb:744 +#. Button that will really abort the repair +#: library/general/src/modules/Popup.rb:744 msgid "Abort System Repair" msgstr "시스템 복구 중지" -#. Button that will continue with the repair -#: library/general/src/modules/Popup.rb:746 +#. Button that will continue with the repair +#: library/general/src/modules/Popup.rb:746 msgid "&Continue System Repair" msgstr "시스템 복구 계속(&C)" -#. Warning text for aborting an installation before anything is installed -#: library/general/src/modules/Popup.rb:749 +#. Warning text for aborting an installation before anything is installed +#: library/general/src/modules/Popup.rb:749 msgid "" "If you abort the installation now,\n" "Linux will not be installed.\n" @@ -1678,10 +1640,10 @@ "Linux는 설치되지 않을 것입니다.\n" "여러분의 하드 디스크 손상되지 않는 상태로 남게 될 것입니다." -#. Warning text for aborting an installation during the install process -#. - After some installation steps have been performed - e.g. -#. disks formatted / some packages already installed -#: library/general/src/modules/Popup.rb:759 +#. Warning text for aborting an installation during the install process +#. - After some installation steps have been performed - e.g. +#. disks formatted / some packages already installed +#: library/general/src/modules/Popup.rb:759 msgid "" "If you abort the installation now, you will\n" "have an incomplete Linux system\n" @@ -1693,9 +1655,9 @@ "상태로 남아있게 됩니다.\n" "재설치가 필요할 것입니다.\n" -#. Warning text for aborting an installation during the install process -#. right in the middle of some critical process (e.g. formatting) -#: library/general/src/modules/Popup.rb:768 +#. Warning text for aborting an installation during the install process +#. right in the middle of some critical process (e.g. formatting) +#: library/general/src/modules/Popup.rb:768 msgid "" "If you abort the installation now,\n" "Linux will be unusable.\n" @@ -1705,221 +1667,221 @@ "Linux는 사용할수 없게 될 것입니다..\n" "재설치가 필요하게 될 것입니다." -#. Confirm aborting the program -#: library/general/src/modules/Popup.rb:822 +#. Confirm aborting the program +#: library/general/src/modules/Popup.rb:822 msgid "Really abort?" msgstr "중단하시겠습니까?" -#. Additional hint when trying to abort program in spite of changes -#: library/general/src/modules/Popup.rb:830 +#. Additional hint when trying to abort program in spite of changes +#: library/general/src/modules/Popup.rb:830 msgid "All changes will be lost!" msgstr "모든변경 사항을 잃게 됩니다!" -#. FIXME: BNC #422612, Use `opt(`noSanityCheck) later -#. button label -#: library/general/src/modules/Popup.rb:860 +#. FIXME: BNC #422612, Use `opt(`noSanityCheck) later +#. button label +#: library/general/src/modules/Popup.rb:860 msgid "&Details..." msgstr "세부 사항(&D)..." -#. translators: summary header for messages generated through autoinstallation -#: library/general/src/modules/Report.rb:103 +#. translators: summary header for messages generated through autoinstallation +#: library/general/src/modules/Report.rb:103 msgid "Messages" msgstr "메시지" -#. Report configuration - will be normal messages displayed? -#. '%1' will be replaced by translated string "Yes" or "No" -#: library/general/src/modules/Report.rb:111 +#. Report configuration - will be normal messages displayed? +#. '%1' will be replaced by translated string "Yes" or "No" +#: library/general/src/modules/Report.rb:111 msgid "Display Messages: %1" msgstr "메시지 표시: %1" -#. translators: summary if the messages should be displayed -#. translators: summary if the messages should be written to log file -#. translators: summary if the warnings should be displayed -#. translators: summary if the warnings should be written to log file -#. translators: summary if the errors should be displayed -#. translators: summary if the errors should be written to log file -#. TRANSLATORS: human text for Boolean value -#: library/general/src/modules/Report.rb:113 -#: library/general/src/modules/Report.rb:129 -#: library/general/src/modules/Report.rb:143 -#: library/general/src/modules/Report.rb:159 -#: library/general/src/modules/Report.rb:173 -#: library/general/src/modules/Report.rb:189 -#: library/network/src/modules/NetworkPopup.rb:90 -#: library/types/src/modules/String.rb:101 +#. translators: summary if the messages should be displayed +#. translators: summary if the messages should be written to log file +#. translators: summary if the warnings should be displayed +#. translators: summary if the warnings should be written to log file +#. translators: summary if the errors should be displayed +#. translators: summary if the errors should be written to log file +#. TRANSLATORS: human text for Boolean value +#: library/general/src/modules/Report.rb:113 +#: library/general/src/modules/Report.rb:129 +#: library/general/src/modules/Report.rb:143 +#: library/general/src/modules/Report.rb:159 +#: library/general/src/modules/Report.rb:173 +#: library/general/src/modules/Report.rb:189 +#: library/network/src/modules/NetworkPopup.rb:90 +#: library/types/src/modules/String.rb:101 msgid "Yes" msgstr "예" -#: library/general/src/modules/Report.rb:113 -#: library/general/src/modules/Report.rb:129 -#: library/general/src/modules/Report.rb:143 -#: library/general/src/modules/Report.rb:159 -#: library/general/src/modules/Report.rb:173 -#: library/general/src/modules/Report.rb:189 -#: library/network/src/modules/NetworkPopup.rb:89 -#: library/types/src/modules/String.rb:101 +#: library/general/src/modules/Report.rb:113 +#: library/general/src/modules/Report.rb:129 +#: library/general/src/modules/Report.rb:143 +#: library/general/src/modules/Report.rb:159 +#: library/general/src/modules/Report.rb:173 +#: library/general/src/modules/Report.rb:189 +#: library/network/src/modules/NetworkPopup.rb:89 +#: library/types/src/modules/String.rb:101 msgid "No" msgstr "아니오" -#. Report configuration - will have normal messages timeout? -#. '%1' will be replaced by number of seconds -#: library/general/src/modules/Report.rb:120 +#. Report configuration - will have normal messages timeout? +#. '%1' will be replaced by number of seconds +#: library/general/src/modules/Report.rb:120 msgid "Time-out Messages: %1" msgstr "시간초과 메시지: %1" -#. Report configuration - will be normal messages logged to file? -#. '%1' will be replaced by translated string "Yes" or "No" -#: library/general/src/modules/Report.rb:127 +#. Report configuration - will be normal messages logged to file? +#. '%1' will be replaced by translated string "Yes" or "No" +#: library/general/src/modules/Report.rb:127 msgid "Log Messages: %1" msgstr "로그 메시지: %1" -#. translators: summary header for warnings generated through autoinstallation -#: library/general/src/modules/Report.rb:134 +#. translators: summary header for warnings generated through autoinstallation +#: library/general/src/modules/Report.rb:134 msgid "Warnings" msgstr "경고" -#. Report configuration - will be warning messages displayed? -#. '%1' will be replaced by translated string "Yes" or "No" -#: library/general/src/modules/Report.rb:141 +#. Report configuration - will be warning messages displayed? +#. '%1' will be replaced by translated string "Yes" or "No" +#: library/general/src/modules/Report.rb:141 msgid "Display Warnings: %1" msgstr "경고 표시: %1" -#. Report configuration - will have warning messages timeout? -#. '%1' will be replaced by number of seconds -#: library/general/src/modules/Report.rb:150 +#. Report configuration - will have warning messages timeout? +#. '%1' will be replaced by number of seconds +#: library/general/src/modules/Report.rb:150 msgid "Time-out Warnings: %1" msgstr "시간초과 경고: %1" -#. Report configuration - will be warning messages logged to file? -#. '%1' will be replaced by translated string "Yes" or "No" -#: library/general/src/modules/Report.rb:157 +#. Report configuration - will be warning messages logged to file? +#. '%1' will be replaced by translated string "Yes" or "No" +#: library/general/src/modules/Report.rb:157 msgid "Log Warnings: %1" msgstr "로그 경고: %1" -#. translators: summary header for errors generated through autoinstallation -#: library/general/src/modules/Report.rb:164 +#. translators: summary header for errors generated through autoinstallation +#: library/general/src/modules/Report.rb:164 msgid "Errors" msgstr "에러" -#. Report configuration - will be error messages displayed? -#. '%1' will be replaced by translated string "Yes" or "No" -#: library/general/src/modules/Report.rb:171 +#. Report configuration - will be error messages displayed? +#. '%1' will be replaced by translated string "Yes" or "No" +#: library/general/src/modules/Report.rb:171 msgid "Display Errors: %1" msgstr "에러표시: %1" -#. Report configuration - will have error messages timeout? -#. '%1' will be replaced by number of seconds -#: library/general/src/modules/Report.rb:180 +#. Report configuration - will have error messages timeout? +#. '%1' will be replaced by number of seconds +#: library/general/src/modules/Report.rb:180 msgid "Time-out Errors: %1" msgstr "시간초과 에러: %1" -#. Report configuration - will be error messages logged to file? -#. '%1' will be replaced by translated string "Yes" or "No" -#: library/general/src/modules/Report.rb:187 +#. Report configuration - will be error messages logged to file? +#. '%1' will be replaced by translated string "Yes" or "No" +#: library/general/src/modules/Report.rb:187 msgid "Log Errors: %1" msgstr "로그 에러: %1" -#. translators: warnings summary header -#: library/general/src/modules/Report.rb:668 +#. translators: warnings summary header +#: library/general/src/modules/Report.rb:668 msgid "Warning:" msgstr "경고:" -#. translators: errors summary header -#: library/general/src/modules/Report.rb:685 +#. translators: errors summary header +#: library/general/src/modules/Report.rb:685 msgid "Error:" msgstr "에러:" -#. translators: message summary header -#. translators: message summary header -#: library/general/src/modules/Report.rb:702 -#: library/general/src/modules/Report.rb:719 +#. translators: message summary header +#. translators: message summary header +#: library/general/src/modules/Report.rb:702 +#: library/general/src/modules/Report.rb:719 msgid "Message:" msgstr "메시지:" -#. translators: summary if the module has not been used yet in AutoYaST profile -#: library/general/src/modules/Summary.rb:68 +#. translators: summary if the module has not been used yet in AutoYaST profile +#: library/general/src/modules/Summary.rb:68 msgid "Not configured yet." msgstr "아직 구성되지 않았습니다." -#. translators: summary if no hardware was detected -#: library/general/src/modules/Summary.rb:82 +#. translators: summary if no hardware was detected +#: library/general/src/modules/Summary.rb:82 msgid "Not detected." msgstr "검색되지 않았습니다." -#. Create an edit table with basic buttons. -#. -#. It contains table and buttons Add, Edit, Delete. User may specify table header -#. and content, content that will be placed above table, between table -#. and buttons, below buttons and rights from buttons (usually another -#. button). -#. -#. @param [Yast::Term] table_header Table header as defined in UI. -#. @param [Array] table_contents Table items. -#. @param [Yast::Term] above_table Content to place above table. There is no need to -#. place caption here, because the dialog has its caption. -#. Set it to nil if you do not want to place anything here. -#. @param [Yast::Term] below_table Contents to place between table and buttons. -#. Set it to nil if you do not want to place anything here. -#. @param [Yast::Term] below_buttons Content to place below bottons. -#. Set it to nil if you do not want to place anything here. -#. @param [Yast::Term] buttons Content to place rights from buttons. Usually -#. an additional button, e.g. Set as default. -#. Set it to nil if you do not want to place anything here. -#. @return Content for the SetWizardContent[Buttons]() -#. <B>UI elements ids:</B><table> -#. <tr><td>Table</td><td>`table</td></tr> -#. <tr><td>Button add</td><td>`add_button</td></tr> -#. <tr><td>Button edit</td><td>`edit_button</td></tr> -#. <tr><td>Button delete</td><td>`delete_button</td></tr> -#. </table> -#: library/general/src/modules/UIHelper.rb:82 +#. Create an edit table with basic buttons. +#. +#. It contains table and buttons Add, Edit, Delete. User may specify table header +#. and content, content that will be placed above table, between table +#. and buttons, below buttons and rights from buttons (usually another +#. button). +#. +#. @param [Yast::Term] table_header Table header as defined in UI. +#. @param [Array] table_contents Table items. +#. @param [Yast::Term] above_table Content to place above table. There is no need to +#. place caption here, because the dialog has its caption. +#. Set it to nil if you do not want to place anything here. +#. @param [Yast::Term] below_table Contents to place between table and buttons. +#. Set it to nil if you do not want to place anything here. +#. @param [Yast::Term] below_buttons Content to place below bottons. +#. Set it to nil if you do not want to place anything here. +#. @param [Yast::Term] buttons Content to place rights from buttons. Usually +#. an additional button, e.g. Set as default. +#. Set it to nil if you do not want to place anything here. +#. @return Content for the SetWizardContent[Buttons]() +#. <B>UI elements ids:</B><table> +#. <tr><td>Table</td><td>`table</td></tr> +#. <tr><td>Button add</td><td>`add_button</td></tr> +#. <tr><td>Button edit</td><td>`edit_button</td></tr> +#. <tr><td>Button delete</td><td>`delete_button</td></tr> +#. </table> +#: library/general/src/modules/UIHelper.rb:82 msgid "A&dd" msgstr "추가(&D)" -#: library/general/src/modules/UIHelper.rb:83 +#: library/general/src/modules/UIHelper.rb:83 msgid "&Edit" msgstr "편집(&E)" -#: library/general/src/modules/UIHelper.rb:84 +#: library/general/src/modules/UIHelper.rb:84 msgid "De&lete" msgstr "삭제(&L)" -#. translators: Tree header -#: library/general/src/modules/ValueBrowser.rb:152 +#. translators: Tree header +#: library/general/src/modules/ValueBrowser.rb:152 msgid "&Variable" msgstr "변수(&V)" -#. FIXME: do it -#: library/gpg/src/modules/GPG.rb:234 +#. FIXME: do it +#: library/gpg/src/modules/GPG.rb:234 msgid "Xterm is missing, install xterm package." msgstr "Xterm이 없습니다. xterm 패키지를 설치하십시오." -#. Get widget description map -#. @return widget description map -#: library/gpg/src/modules/GPGWidgets.rb:187 +#. Get widget description map +#. @return widget description map +#: library/gpg/src/modules/GPGWidgets.rb:187 msgid "GPG Private Keys" msgstr "GPG 개인 키" -#. table header - GPG key user ID -#. table header - GPG key user ID -#: library/gpg/src/modules/GPGWidgets.rb:194 -#: library/gpg/src/modules/GPGWidgets.rb:226 +#. table header - GPG key user ID +#. table header - GPG key user ID +#: library/gpg/src/modules/GPGWidgets.rb:194 +#: library/gpg/src/modules/GPGWidgets.rb:226 msgid "User ID" msgstr "사용자 ID" -#. table header - GPG key fingerprint -#. table header - GPG key fingerprint -#. lazy -#. Standard text strings -#. GnuPG fingerprint used as "Fingerprint: AAA BBB CCC" -#: library/gpg/src/modules/GPGWidgets.rb:196 -#: library/gpg/src/modules/GPGWidgets.rb:228 -#: library/packages/src/modules/SignatureCheckDialogs.rb:55 +#. table header - GPG key fingerprint +#. table header - GPG key fingerprint +#. lazy +#. Standard text strings +#. GnuPG fingerprint used as "Fingerprint: AAA BBB CCC" +#: library/gpg/src/modules/GPGWidgets.rb:196 +#: library/gpg/src/modules/GPGWidgets.rb:228 +#: library/packages/src/modules/SignatureCheckDialogs.rb:55 msgid "Fingerprint" msgstr "지문" -#. fill up the widget in init handler -#: library/gpg/src/modules/GPGWidgets.rb:207 +#. fill up the widget in init handler +#: library/gpg/src/modules/GPGWidgets.rb:207 msgid "" "<p><big><b>GPG Private Key</b></big><br>\n" "The table contains list of the private GPG keys.</p>" @@ -1927,14 +1889,14 @@ "<p><big><b>GPG 개인 키</b></big><br>\n" "이 테이블에는 개인 GPG 키 목록이 포함되어 있습니다.</p>" -#. Get widget description map -#. @return widget description map -#: library/gpg/src/modules/GPGWidgets.rb:219 +#. Get widget description map +#. @return widget description map +#: library/gpg/src/modules/GPGWidgets.rb:219 msgid "GPG Public Keys" msgstr "GPG 공용 키" -#. fill up the widget in init handler -#: library/gpg/src/modules/GPGWidgets.rb:239 +#. fill up the widget in init handler +#: library/gpg/src/modules/GPGWidgets.rb:239 msgid "" "<p><big><b>GPG Public Key</b></big><br>\n" "The table contains list of the public GPG keys.</p>" @@ -1942,33 +1904,31 @@ "<p><big><b>GPG 공용 키</b></big><br>\n" "이 테이블에는 공용 GPG 키 목록이 포함되어 있습니다.</p>" -#. Get widget description map -#. @return widget description map -#: library/gpg/src/modules/GPGWidgets.rb:282 +#. Get widget description map +#. @return widget description map +#: library/gpg/src/modules/GPGWidgets.rb:282 msgid "&Create a new GPG key..." msgstr "새 GPG 키 만들기(&C)..." -#: library/gpg/src/modules/GPGWidgets.rb:285 +#: library/gpg/src/modules/GPGWidgets.rb:285 msgid "" "<p><big><b>Create a new GPG key</b></big><br>\n" -"<tt>gpg --gen-key</tt> is started, see <tt>gpg</tt> manual pager for more " -"information.\n" +"<tt>gpg --gen-key</tt> is started, see <tt>gpg</tt> manual pager for more information.\n" "Press Ctrl+C to cancel.\n" "</p>" msgstr "" "<p><big><b>새 GPG 키 만들기</b></big><br>\n" -"<tt>gpg --gen-key</tt>가 시작됩니다. 자세한 내용은 <tt>gpg</tt> 매뉴얼 페이지" -"를 참조하십시오.\n" +"<tt>gpg --gen-key</tt>가 시작됩니다. 자세한 내용은 <tt>gpg</tt> 매뉴얼 페이지를 참조하십시오.\n" " 취소하려면 Ctrl+C를 누르십시오.\n" " </p>" -#. text entry -#: library/gpg/src/modules/GPGWidgets.rb:325 +#. text entry +#: library/gpg/src/modules/GPGWidgets.rb:325 msgid "&Passphrase for GPG Key %1" msgstr "%1 GPG 키에 대한 암호 문구(&P)" -#. help text -#: library/gpg/src/modules/GPGWidgets.rb:333 +#. help text +#: library/gpg/src/modules/GPGWidgets.rb:333 msgid "" "<p><big><b>Passphrase</b></big><br>\n" "Enter passphrase to unlock the GPG key." @@ -1976,25 +1936,25 @@ "<p><big><b>암호 문구</b></big><br>\n" "GPG 키 잠금을 해제하기 위한 암호 문구를 입력합니다." -#. Create a popup window term with the passphrase widget. -#. @return [Yast::Term] definition of the popup -#: library/gpg/src/modules/GPGWidgets.rb:350 +#. Create a popup window term with the passphrase widget. +#. @return [Yast::Term] definition of the popup +#: library/gpg/src/modules/GPGWidgets.rb:350 msgid "Enter Passphrase" msgstr "암호 문구 입력" -#. ask for the passphrase in the commandline (interactive) mode -#: library/gpg/src/modules/GPGWidgets.rb:382 +#. ask for the passphrase in the commandline (interactive) mode +#: library/gpg/src/modules/GPGWidgets.rb:382 msgid "Enter Passphrase to Unlock GPG Key %1: " msgstr "%1 GPG 키 잠금을 해제하기 위한 암호 문구를 입력하십시오." -#. Prompt the user for a message to describe the changes -#. that she did using YaST, logs it using {#Note} -#: library/log/src/modules/ALog.rb:105 +#. Prompt the user for a message to describe the changes +#. that she did using YaST, logs it using {#Note} +#: library/log/src/modules/ALog.rb:105 msgid "Enter a log message that describes the changes you made." msgstr "변경사항을 설명하는 로그 메시지를 입력하십시오." -#. help for the log widget, part 1, alt. 1 -#: library/log/src/modules/LogView.rb:109 +#. help for the log widget, part 1, alt. 1 +#: library/log/src/modules/LogView.rb:109 msgid "" "<p><b><big>Displayed Log</big></b><br>\n" "Use <b>Log</b> to select the log to display. It will be displayed in\n" @@ -2004,8 +1964,8 @@ "표시할 로그를 선택하려면 <b>로그</b>를 사용하십시오. 로그는 아래 필드에\n" " 표시됩니다.</p>\n" -#. help for the log widget, part 1, alt. 2 -#: library/log/src/modules/LogView.rb:120 +#. help for the log widget, part 1, alt. 2 +#: library/log/src/modules/LogView.rb:120 msgid "" "<p><b><big>The Log</big></b><br>\n" "This screen displays the log.</p>" @@ -2013,8 +1973,8 @@ "<p><b><big>로그</big></b><br>\n" "이 화면은 로그를 표시합니다.</p>" -#. help for the log widget, part 2, alt. 1, %1 is a menu button label -#: library/log/src/modules/LogView.rb:130 +#. help for the log widget, part 2, alt. 1, %1 is a menu button label +#: library/log/src/modules/LogView.rb:130 msgid "" "<p>\n" "To process advanced actions or save the log into a file, click <b>%1</b>\n" @@ -2024,8 +1984,8 @@ "고급 작업을 처리하거나 파일에 로그를 저장하려면 <b>%1</b>을(를)\n" " 클릭하고 처리할 작업을 선택하십시오.</p>" -#. help for the log widget, part 2, alt. 2, %1 is a menu button label -#: library/log/src/modules/LogView.rb:145 +#. help for the log widget, part 2, alt. 2, %1 is a menu button label +#: library/log/src/modules/LogView.rb:145 msgid "" "<p>\n" "To process advanced actions, click <b>%1</b>\n" @@ -2035,8 +1995,8 @@ "고급 작업을 처리하려면 <b>%1</b>을(를)\n" " 클릭하고 처리할 작업을 선택하십시오.</p>" -#. help for the log widget, part 2, alt. 3 -#: library/log/src/modules/LogView.rb:158 +#. help for the log widget, part 2, alt. 3 +#: library/log/src/modules/LogView.rb:158 msgid "" "<p>\n" "To save the log into a file, click <b>Save Log</b> and select the file\n" @@ -2046,58 +2006,58 @@ "파일에 로그를 저장하려면 <b>로그 저장</b>을 클릭하고 로그를 저장할\n" " 파일을 선택하십시오.</p>\n" -#. menu button -#. Get the buttons below the box with the log -#. @param [Boolean] popup boolean true if running in popup (and Close is needed) -#. @param [Hash{String => Object}] glob_param a map of global parameters of the log widget -#. @param [Array Object>}] log_maps a list of maps describing all the logs -#. @return [Yast::Term] the widget with buttons -#: library/log/src/modules/LogView.rb:177 -#: library/log/src/modules/LogView.rb:277 -#: library/log/src/modules/LogView.rb:308 +#. menu button +#. Get the buttons below the box with the log +#. @param [Boolean] popup boolean true if running in popup (and Close is needed) +#. @param [Hash{String => Object}] glob_param a map of global parameters of the log widget +#. @param [Array Object>}] log_maps a list of maps describing all the logs +#. @return [Yast::Term] the widget with buttons +#: library/log/src/modules/LogView.rb:177 +#: library/log/src/modules/LogView.rb:277 +#: library/log/src/modules/LogView.rb:308 msgid "Ad&vanced" msgstr "고급(&V)" -#. combo box entry (only used as fallback in case -#. of error in the YaST code) -#: library/log/src/modules/LogView.rb:231 +#. combo box entry (only used as fallback in case +#. of error in the YaST code) +#: library/log/src/modules/LogView.rb:231 msgid "Log" msgstr "로그" -#. logview caption -#. logview caption -#. menubutton -#: library/log/src/modules/LogView.rb:238 -#: library/log/src/modules/LogView.rb:349 -#: library/log/src/modules/LogView.rb:468 -#: library/log/src/modules/LogView.rb:545 +#. logview caption +#. logview caption +#. menubutton +#: library/log/src/modules/LogView.rb:238 +#: library/log/src/modules/LogView.rb:349 +#: library/log/src/modules/LogView.rb:468 +#: library/log/src/modules/LogView.rb:545 msgid "&Log" msgstr "로그(&L)" -#. menubutton entry -#: library/log/src/modules/LogView.rb:255 +#. menubutton entry +#: library/log/src/modules/LogView.rb:255 msgid "&Save Log" msgstr "로그 저장(&S)" -#. popup caption, save into home directory by default (bnc#653601) -#: library/log/src/modules/LogView.rb:390 +#. popup caption, save into home directory by default (bnc#653601) +#: library/log/src/modules/LogView.rb:390 msgid "Save Log as..." msgstr "다른 이름으로 로그 저장..." -#. flag indicating if background process is (or should be) running -#: library/log/src/modules/LogViewCore.rb:67 +#. flag indicating if background process is (or should be) running +#: library/log/src/modules/LogViewCore.rb:67 msgid "Error occurred while reading the log." msgstr "로그를 읽는 동안 에러가 발생했습니다." -#. TRANSLATORS: Firewall zone full-name, used as combo box item or dialog title -#: library/network/src/lib/network/susefirewall.rb:514 +#. TRANSLATORS: Firewall zone full-name, used as combo box item or dialog title +#: library/network/src/lib/network/susefirewall.rb:514 msgid "Unknown Zone" msgstr "알 수 없는 영역" -#. TRANSLATORS: Error message, %1 = interface name (like eth0) -#. TRANSLATORS: Error message, %1 = interface name (like eth0) -#: library/network/src/lib/network/susefirewall.rb:946 -#: library/network/src/lib/network/susefirewall.rb:1022 +#. TRANSLATORS: Error message, %1 = interface name (like eth0) +#. TRANSLATORS: Error message, %1 = interface name (like eth0) +#: library/network/src/lib/network/susefirewall.rb:946 +#: library/network/src/lib/network/susefirewall.rb:1022 msgid "" "Interface '%1' is not assigned to any firewall zone.\n" "Run YaST2 Firewall and assign it.\n" @@ -2105,46 +2065,46 @@ "'%1' 인터페이스는 방화벽 영역에 할당되지 않았습니다.\n" "YaST2 Firewall을 실행하여 할당하십시오.\n" -#. TRANSLATORS: Firewall zone name - used in combo box or dialog title -#: library/network/src/lib/network/susefirewall2.rb:119 -#: library/network/src/lib/network/susefirewalld.rb:100 +#. TRANSLATORS: Firewall zone name - used in combo box or dialog title +#: library/network/src/lib/network/susefirewall2.rb:119 +#: library/network/src/lib/network/susefirewalld.rb:100 msgid "External Zone" msgstr "외부 영역" -#. TRANSLATORS: Firewall zone name - used in combo box or dialog title -#: library/network/src/lib/network/susefirewall2.rb:123 -#: library/network/src/lib/network/susefirewalld.rb:106 +#. TRANSLATORS: Firewall zone name - used in combo box or dialog title +#: library/network/src/lib/network/susefirewall2.rb:123 +#: library/network/src/lib/network/susefirewalld.rb:106 msgid "Internal Zone" msgstr "내부 영역" -#. TRANSLATORS: Firewall zone name - used in combo box or dialog title -#: library/network/src/lib/network/susefirewall2.rb:127 -#: library/network/src/lib/network/susefirewalld.rb:94 +#. TRANSLATORS: Firewall zone name - used in combo box or dialog title +#: library/network/src/lib/network/susefirewall2.rb:127 +#: library/network/src/lib/network/susefirewalld.rb:94 msgid "Demilitarized Zone" msgstr "DMZ" -#. protocol name -#: library/network/src/lib/network/susefirewall2.rb:250 +#. protocol name +#: library/network/src/lib/network/susefirewall2.rb:250 msgid "TCP" msgstr "TCP" -#. protocol name -#: library/network/src/lib/network/susefirewall2.rb:252 +#. protocol name +#: library/network/src/lib/network/susefirewall2.rb:252 msgid "UDP" msgstr "UDP" -#. protocol name -#: library/network/src/lib/network/susefirewall2.rb:254 +#. protocol name +#: library/network/src/lib/network/susefirewall2.rb:254 msgid "RPC" msgstr "RPC" -#. protocol name -#: library/network/src/lib/network/susefirewall2.rb:256 +#. protocol name +#: library/network/src/lib/network/susefirewall2.rb:256 msgid "IP" msgstr "IP" -#. TRANSLATORS: Error message, %1 = interface name (like eth0) -#: library/network/src/lib/network/susefirewall2.rb:1066 +#. TRANSLATORS: Error message, %1 = interface name (like eth0) +#: library/network/src/lib/network/susefirewall2.rb:1066 msgid "" "Interface '%1' is included in multiple firewall zones.\n" "Continuing with configuration can produce errors.\n" @@ -2158,210 +2118,210 @@ " 구성을 그대로 두고 '/etc/sysconfig/SuSEFirewall'에서 수동으로\n" " 수정하는 것이 좋습니다." -#. TRANSLATORS: Dialog caption -#: library/network/src/lib/network/susefirewall2.rb:1543 +#. TRANSLATORS: Dialog caption +#: library/network/src/lib/network/susefirewall2.rb:1543 msgid "Initializing Firewall Configuration" msgstr "방화벽 구성 초기화" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1551 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1551 msgid "Check for network devices" msgstr "네트워크 장치 검사" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1553 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1553 msgid "Read current configuration" msgstr "현재 구성 읽기" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1555 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1555 msgid "Check possibly conflicting services" msgstr "충돌을 일으킬 가능성이 있는 서비스 검사" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1559 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1559 msgid "Checking for network devices..." msgstr "네트워크 장치 검사 중..." -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1561 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1561 msgid "Reading current configuration..." msgstr "현재 설정 불러오는 중" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1563 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1563 msgid "Checking possibly conflicting services..." msgstr "충돌을 일으킬 가능성이 있는 서비스 검사 중..." -#. TRANSLATORS: Dialog caption -#: library/network/src/lib/network/susefirewall2.rb:1702 +#. TRANSLATORS: Dialog caption +#: library/network/src/lib/network/susefirewall2.rb:1702 msgid "Writing Firewall Configuration" msgstr "방화벽 구성 기록" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1710 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1710 msgid "Write firewall settings" msgstr "방화벽 설정 저장" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1712 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1712 msgid "Adjust firewall service" msgstr "방화벽 서비스 조정" -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1716 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1716 msgid "Writing firewall settings..." msgstr "방화벽 설정 저장 중..." -#. TRANSLATORS: Progress step -#: library/network/src/lib/network/susefirewall2.rb:1718 +#. TRANSLATORS: Progress step +#: library/network/src/lib/network/susefirewall2.rb:1718 msgid "Adjusting firewall service..." msgstr "방화벽 서비스 조정 중..." -#. TRANSLATORS: a popup error message -#: library/network/src/lib/network/susefirewall2.rb:1737 +#. TRANSLATORS: a popup error message +#: library/network/src/lib/network/susefirewall2.rb:1737 msgid "Writing settings failed" msgstr "설정 쓰기 실패됨" -#. table item, %1 stands for the buggy protocol name -#: library/network/src/lib/network/susefirewall2.rb:2392 +#. table item, %1 stands for the buggy protocol name +#: library/network/src/lib/network/susefirewall2.rb:2392 msgid "Unknown protocol (%1)" msgstr "알 수 없는 프로토콜(%1)" -#. Returns service definition. -#. See @services for the format. -#. If *silent* is `false` (the default), the method throws an exception -#. {Yast::SuSEFirewalServiceNotFound} if service is not found on disk. -#. -#. @param [String] service name (including the "service:" prefix) -#. @param [String] (optional) whether to silently return nil -#. when service is not found (default false) -#. @api private -#. Immediately writes the configuration of service defined by package to the -#. service definition file. Service must be defined by package, this function -#. doesn't work for hard-coded services (SuSEFirewallServices). -#. Function throws an exception {Yast::SuSEFirewalServiceNotFound} -#. if service is not known (undefined) or it is not a service -#. defined by package. -#. -#. @param [String] service ID (e.g., "service:ssh") -#. @param [Hash{String => Array<String>] store_definition of full service definition -#. @return [Boolean] if successful (nil in case of developer's mistake) -#. -#. @see #IsKnownService -#. @see #ServiceDefinedByPackage -#. -#. @example -#. SetNeededPortsAndProtocols ( -#. "service:something", -#. { -#. "tcp_ports" => [ "22", "ftp-data", "400:420" ], -#. "udp_ports" => [ ], -#. "rpc_ports" => [ "portmap", "ypbind" ], -#. "ip_protocols" => [ "esp" ], -#. "broadcast_ports"=> [ ], -#. } -#. ) -#. If service description is the default one then we know that we haven't read the service -#. information just yet. Lets do it now -#: library/network/src/lib/network/susefirewall2services.rb:340 -#: library/network/src/lib/network/susefirewall2services.rb:497 -#: library/network/src/lib/network/susefirewalldservices.rb:127 +#. Returns service definition. +#. See @services for the format. +#. If *silent* is `false` (the default), the method throws an exception +#. {Yast::SuSEFirewalServiceNotFound} if service is not found on disk. +#. +#. @param [String] service name (including the "service:" prefix) +#. @param [String] (optional) whether to silently return nil +#. when service is not found (default false) +#. @api private +#. Immediately writes the configuration of service defined by package to the +#. service definition file. Service must be defined by package, this function +#. doesn't work for hard-coded services (SuSEFirewallServices). +#. Function throws an exception {Yast::SuSEFirewalServiceNotFound} +#. if service is not known (undefined) or it is not a service +#. defined by package. +#. +#. @param [String] service ID (e.g., "service:ssh") +#. @param [Hash{String => Array<String>] store_definition of full service definition +#. @return [Boolean] if successful (nil in case of developer's mistake) +#. +#. @see #IsKnownService +#. @see #ServiceDefinedByPackage +#. +#. @example +#. SetNeededPortsAndProtocols ( +#. "service:something", +#. { +#. "tcp_ports" => [ "22", "ftp-data", "400:420" ], +#. "udp_ports" => [ ], +#. "rpc_ports" => [ "portmap", "ypbind" ], +#. "ip_protocols" => [ "esp" ], +#. "broadcast_ports"=> [ ], +#. } +#. ) +#. If service description is the default one then we know that we haven't read the service +#. information just yet. Lets do it now +#: library/network/src/lib/network/susefirewall2services.rb:340 +#: library/network/src/lib/network/susefirewall2services.rb:497 +#: library/network/src/lib/network/susefirewalldservices.rb:127 msgid "Service with name '%{service_name}' does not exist" msgstr "이름이 '%{service_name}'인 서비스가 존재하지 않습니다." -#. Fallback for presented service -#: library/network/src/lib/network/susefirewall2services.rb:411 +#. Fallback for presented service +#: library/network/src/lib/network/susefirewall2services.rb:411 msgid "Service: %{filename}" msgstr "서비스: %{filename}" -#. TRANSLATORS: Firewall zone name - used in combo box or dialog title -#: library/network/src/lib/network/susefirewalld.rb:91 +#. TRANSLATORS: Firewall zone name - used in combo box or dialog title +#: library/network/src/lib/network/susefirewalld.rb:91 msgid "Block Zone" msgstr "차단 영역" -#: library/network/src/lib/network/susefirewalld.rb:97 +#: library/network/src/lib/network/susefirewalld.rb:97 msgid "Drop Zone" msgstr "드롭 영역" -#: library/network/src/lib/network/susefirewalld.rb:103 +#: library/network/src/lib/network/susefirewalld.rb:103 msgid "Home Zone" msgstr "홈 영역" -#: library/network/src/lib/network/susefirewalld.rb:109 +#: library/network/src/lib/network/susefirewalld.rb:109 msgid "Public Zone" msgstr "공용 영역" -#: library/network/src/lib/network/susefirewalld.rb:112 +#: library/network/src/lib/network/susefirewalld.rb:112 msgid "Trusted Zone" msgstr "트러스트된 영역" -#: library/network/src/lib/network/susefirewalld.rb:115 +#: library/network/src/lib/network/susefirewalld.rb:115 msgid "Work Zone" msgstr "회사 영역" -#. A good default description for all services. We will use that to -#. determine if the service has been populated or not. -#. -#. @param service_name [String] The service name -#. @return [String] Default description for service -#: library/network/src/lib/network/susefirewalldservices.rb:149 +#. A good default description for all services. We will use that to +#. determine if the service has been populated or not. +#. +#. @param service_name [String] The service name +#. @return [String] Default description for service +#: library/network/src/lib/network/susefirewalldservices.rb:149 msgid "The %{service_name} Service" msgstr "%{service_name} 서비스" -#. TRANSLATORS: Name of unknown service. %1 is a requested service id like nfs-server -#: library/network/src/lib/network/susefirewallservices.rb:73 +#. TRANSLATORS: Name of unknown service. %1 is a requested service id like nfs-server +#: library/network/src/lib/network/susefirewallservices.rb:73 msgid "Unknown service '%1'" msgstr "알 수 없는 서비스 '%1'" -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:109 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:109 msgid "Firewall cannot be adjusted during first stage installation." msgstr "1단계 설치 중 방화벽을 조정할 수 없습니다." -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:114 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:114 msgid "Firewall package is not installed." msgstr "방화벽 패키지가 설치되지 않았습니다." -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:118 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:118 msgid "Firewall is disabled" msgstr "방화벽이 비활성화되었습니다." -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:121 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:121 msgid "Firewall port is closed" msgstr "방화벽이 비활성화되었습니다." -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:124 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:124 msgid "Firewall port is open on all interfaces" msgstr "모든 인터페이스에서 방화벽 포트가 열렸습니다." -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:127 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:127 msgid "Firewall port is open on selected interfaces" msgstr "선택한 인터페이스에서 방화벽 포트가 열렸습니다." -#. label -#: library/network/src/modules/CWMFirewallInterfaces.rb:130 +#. label +#: library/network/src/modules/CWMFirewallInterfaces.rb:130 msgid "No network interfaces are configured" msgstr "구성된 네트워크 인터페이스가 없습니다." -#. BNC #483455: Interface zone name -#: library/network/src/modules/CWMFirewallInterfaces.rb:155 +#. BNC #483455: Interface zone name +#: library/network/src/modules/CWMFirewallInterfaces.rb:155 msgid "Interface is not assigned to any zone" msgstr "영역에 인터페이스가 할당되지 않았습니다." -#. transaltors: selection box title -#: library/network/src/modules/CWMFirewallInterfaces.rb:407 +#. transaltors: selection box title +#: library/network/src/modules/CWMFirewallInterfaces.rb:407 msgid "&Network Interfaces with Open Port in Firewall" msgstr "방화벽 포트가 열린 네트워크 인터페이스(&N)" -#. Check the INT zone, it's not protected by default -#. See bnc #382686 -#: library/network/src/modules/CWMFirewallInterfaces.rb:494 +#. Check the INT zone, it's not protected by default +#. See bnc #382686 +#: library/network/src/modules/CWMFirewallInterfaces.rb:494 msgid "" "These network interfaces assigned to internal network cannot be deselected:\n" "%1\n" @@ -2369,8 +2329,8 @@ "내부 네트워크에 할당된 다음 네트워크 인터페이스는 선택 취소할 수 없습니다.\n" "%1\n" -#. question popup -#: library/network/src/modules/CWMFirewallInterfaces.rb:515 +#. question popup +#: library/network/src/modules/CWMFirewallInterfaces.rb:515 msgid "" "No interface is selected. Service will not\n" "be available for other computers.\n" @@ -2382,8 +2342,8 @@ " \n" " 계속하시겠습니까?" -#. yes-no popup -#: library/network/src/modules/CWMFirewallInterfaces.rb:545 +#. yes-no popup +#: library/network/src/modules/CWMFirewallInterfaces.rb:545 msgid "" "Because of SuSE Firewall settings, the port\n" "on the following interfaces will additionally be open:\n" @@ -2397,10 +2357,10 @@ " \n" " 계속하시겠습니까?" -#. yes-no popup -#. yes-no popup -#: library/network/src/modules/CWMFirewallInterfaces.rb:564 -#: library/network/src/modules/CWMFirewallInterfaces.rb:619 +#. yes-no popup +#. yes-no popup +#: library/network/src/modules/CWMFirewallInterfaces.rb:564 +#: library/network/src/modules/CWMFirewallInterfaces.rb:619 msgid "" "Because of SuSE Firewall settings, the port\n" "on the following interfaces cannot be opened:\n" @@ -2414,23 +2374,23 @@ " \n" " 계속하시겠습니까?" -#. translators: selection box title -#: library/network/src/modules/CWMFirewallInterfaces.rb:701 +#. translators: selection box title +#: library/network/src/modules/CWMFirewallInterfaces.rb:701 msgid "Network &Interfaces with Open Port in Firewall" msgstr "방화벽 포트가 열린 네트워크 인터페이스(&I)" -#. push button to select all network intefaces for firewall -#: library/network/src/modules/CWMFirewallInterfaces.rb:713 +#. push button to select all network intefaces for firewall +#: library/network/src/modules/CWMFirewallInterfaces.rb:713 msgid "Select &All" msgstr "전체 선택(&A)" -#. push button to deselect all network intefaces for firewall -#: library/network/src/modules/CWMFirewallInterfaces.rb:721 +#. push button to deselect all network intefaces for firewall +#: library/network/src/modules/CWMFirewallInterfaces.rb:721 msgid "Select &None" msgstr "전체 선택 취소(&N)" -#. TRANSLATORS: Error message, do not translate %{details} -#: library/network/src/modules/CWMFirewallInterfaces.rb:816 +#. TRANSLATORS: Error message, do not translate %{details} +#: library/network/src/modules/CWMFirewallInterfaces.rb:816 msgid "" "Error checking service status:\n" "%{details}" @@ -2438,8 +2398,8 @@ "서비스 상태를 확인하는 중 오류가 발생했습니다.\n" "%{details}" -#. TRANSLATORS: Error message, do not translate %{details} -#: library/network/src/modules/CWMFirewallInterfaces.rb:850 +#. TRANSLATORS: Error message, do not translate %{details} +#: library/network/src/modules/CWMFirewallInterfaces.rb:850 msgid "" "Error setting service status:\n" "%{details}" @@ -2447,9 +2407,9 @@ "서비스 상태를 설정하는 중 오류가 발생했습니다.\n" "%{details}" -#. help text for firewall settings widget 1/3, -#. %1 is check box label, eg. "Open Port in Firewall" (without quotes) -#: library/network/src/modules/CWMFirewallInterfaces.rb:983 +#. help text for firewall settings widget 1/3, +#. %1 is check box label, eg. "Open Port in Firewall" (without quotes) +#: library/network/src/modules/CWMFirewallInterfaces.rb:983 msgid "" "<p><b><big>Firewall Settings</big></b><br>\n" "To open the firewall to allow access to the service from remote computers,\n" @@ -2459,10 +2419,10 @@ "원격 컴퓨터에서 서비스에 액세스할 수 있도록 방화벽을 열려면\n" " <b>%1</b>을(를) 설정하십시오.<br>" -#. help text for firewall port openning widget 2/3, optional -#. %1 is push button label, eg. "Firewall &Details" (without quotes) -#. note: %2 is correct, do not replace with %1!!! -#: library/network/src/modules/CWMFirewallInterfaces.rb:994 +#. help text for firewall port openning widget 2/3, optional +#. %1 is push button label, eg. "Firewall &Details" (without quotes) +#. note: %2 is correct, do not replace with %1!!! +#: library/network/src/modules/CWMFirewallInterfaces.rb:994 msgid "" "To select interfaces on which to open the port,\n" "click <b>%2</b>.<br>" @@ -2470,8 +2430,8 @@ "포트를 열 인터페이스를 선택하려면\n" "<b>%2</b>을(를) 클릭하십시오.<br>" -#. help text for firewall settings widget 3/3, -#: library/network/src/modules/CWMFirewallInterfaces.rb:1002 +#. help text for firewall settings widget 3/3, +#: library/network/src/modules/CWMFirewallInterfaces.rb:1002 msgid "" "This option is available only if the firewall\n" "is enabled.</p>" @@ -2479,467 +2439,467 @@ "이 옵션은 방화벽이 활성화되었을 때에만\n" "사용할 수 있습니다.</p>" -#. part of help text - check box label, NO SHORTCUT!!! -#: library/network/src/modules/CWMFirewallInterfaces.rb:1014 +#. part of help text - check box label, NO SHORTCUT!!! +#: library/network/src/modules/CWMFirewallInterfaces.rb:1014 msgid "Open Port in Firewall" msgstr "방화벽 포트 열기" -#. part of help text - push button label, NO SHORTCUT!!! -#: library/network/src/modules/CWMFirewallInterfaces.rb:1016 +#. part of help text - push button label, NO SHORTCUT!!! +#: library/network/src/modules/CWMFirewallInterfaces.rb:1016 msgid "Firewall Details" msgstr "방화벽 세부 사항" -#. check box -#: library/network/src/modules/CWMFirewallInterfaces.rb:1047 +#. check box +#: library/network/src/modules/CWMFirewallInterfaces.rb:1047 msgid "Open Port in &Firewall" msgstr "방화벽 포트 열기(&N)" -#. push button -#: library/network/src/modules/CWMFirewallInterfaces.rb:1054 +#. push button +#: library/network/src/modules/CWMFirewallInterfaces.rb:1054 msgid "Firewall &Details..." msgstr "방화벽 상세 정보(&I)..." -#: library/network/src/modules/CWMFirewallInterfaces.rb:1082 +#: library/network/src/modules/CWMFirewallInterfaces.rb:1082 msgid "Firewall Settings for %{firewall}" msgstr "%{firewall}에 대한 방화벽 설정" -#. label text -#: library/network/src/modules/CWMFirewallInterfaces.rb:1089 +#. label text +#: library/network/src/modules/CWMFirewallInterfaces.rb:1089 msgid "Firewall is open" msgstr "방화벽이 열렸습니다." -#. pppN must be tried before pN, modem before netcard -#. Device type label -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:415 -#: library/network/src/modules/NetworkInterfaces.rb:1268 -#: library/network/src/modules/NetworkInterfaces.rb:1279 -#: library/system/src/include/hwinfo/classnames.rb:108 -#: library/system/src/include/hwinfo/classnames.rb:198 +#. pppN must be tried before pN, modem before netcard +#. Device type label +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:415 +#: library/network/src/modules/NetworkInterfaces.rb:1268 +#: library/network/src/modules/NetworkInterfaces.rb:1279 +#: library/system/src/include/hwinfo/classnames.rb:108 +#: library/system/src/include/hwinfo/classnames.rb:198 msgid "Modem" msgstr "모뎀" -#: library/network/src/modules/NetworkInterfaces.rb:420 +#: library/network/src/modules/NetworkInterfaces.rb:420 msgid "Network Card" msgstr "네트워크 카드" -#. Device type label -#. Device type label -#. Device type label -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:425 -#: library/network/src/modules/NetworkInterfaces.rb:1213 -#: library/network/src/modules/NetworkInterfaces.rb:1251 -#: library/network/src/modules/NetworkInterfaces.rb:1257 -#: library/network/src/modules/NetworkInterfaces.rb:1272 +#. Device type label +#. Device type label +#. Device type label +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:425 +#: library/network/src/modules/NetworkInterfaces.rb:1213 +#: library/network/src/modules/NetworkInterfaces.rb:1251 +#: library/network/src/modules/NetworkInterfaces.rb:1257 +#: library/network/src/modules/NetworkInterfaces.rb:1272 msgid "ISDN" msgstr "ISDN" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:430 -#: library/network/src/modules/NetworkInterfaces.rb:1220 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:430 +#: library/network/src/modules/NetworkInterfaces.rb:1220 msgid "DSL" msgstr "DSL" -#: library/network/src/modules/NetworkInterfaces.rb:432 -#: library/packages/src/modules/SignatureCheckDialogs.rb:480 -#: library/packages/src/modules/SignatureCheckDialogs.rb:481 -#: library/packages/src/modules/SignatureCheckDialogs.rb:753 -#: library/packages/src/modules/SignatureCheckDialogs.rb:754 -#: library/packages/src/modules/SignatureCheckDialogs.rb:989 -#: library/packages/src/modules/SignatureCheckDialogs.rb:990 +#: library/network/src/modules/NetworkInterfaces.rb:432 +#: library/packages/src/modules/SignatureCheckDialogs.rb:480 +#: library/packages/src/modules/SignatureCheckDialogs.rb:481 +#: library/packages/src/modules/SignatureCheckDialogs.rb:753 +#: library/packages/src/modules/SignatureCheckDialogs.rb:754 +#: library/packages/src/modules/SignatureCheckDialogs.rb:989 +#: library/packages/src/modules/SignatureCheckDialogs.rb:990 msgid "Unknown" msgstr "알수없음" -#. Device type label -#. This is what used to be Virtual Interface (eth0:1). -#. In our data model, additional addresses for an interface -#. are represented as its sub-interfaces. -#. And also we frequently confuse "device" and "interface" -#. :-( -#: library/network/src/modules/NetworkInterfaces.rb:1189 +#. Device type label +#. This is what used to be Virtual Interface (eth0:1). +#. In our data model, additional addresses for an interface +#. are represented as its sub-interfaces. +#. And also we frequently confuse "device" and "interface" +#. :-( +#: library/network/src/modules/NetworkInterfaces.rb:1189 msgid "Additional Address" msgstr "추가 주소" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1194 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1194 msgid "ARCnet" msgstr "ARCnet" -#: library/network/src/modules/NetworkInterfaces.rb:1194 +#: library/network/src/modules/NetworkInterfaces.rb:1194 msgid "ARCnet Network Card" msgstr "ARCnet 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1197 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1197 msgid "ATM" msgstr "ATM" -#: library/network/src/modules/NetworkInterfaces.rb:1198 +#: library/network/src/modules/NetworkInterfaces.rb:1198 msgid "Asynchronous Transfer Mode (ATM)" msgstr "ATM(비동기 전송 모드)" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1202 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1202 msgid "Bluetooth" msgstr "Bluetooth" -#: library/network/src/modules/NetworkInterfaces.rb:1203 +#: library/network/src/modules/NetworkInterfaces.rb:1203 msgid "Bluetooth Connection" msgstr "Bluetooth 연결" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1206 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1206 msgid "Bond" msgstr "결합" -#: library/network/src/modules/NetworkInterfaces.rb:1206 +#: library/network/src/modules/NetworkInterfaces.rb:1206 msgid "Bond Network" msgstr "네트워크 결합" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1209 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1209 msgid "CLAW" msgstr "CLAW" -#: library/network/src/modules/NetworkInterfaces.rb:1210 +#: library/network/src/modules/NetworkInterfaces.rb:1210 msgid "Common Link Access for Workstation (CLAW)" msgstr "CLAW(Common Link Access for Workstation)" -#: library/network/src/modules/NetworkInterfaces.rb:1213 +#: library/network/src/modules/NetworkInterfaces.rb:1213 msgid "ISDN Card" msgstr "ISDN 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1216 -#: library/system/src/include/hwinfo/classnames.rb:223 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1216 +#: library/system/src/include/hwinfo/classnames.rb:223 msgid "CTC" msgstr "CTC" -#: library/network/src/modules/NetworkInterfaces.rb:1217 +#: library/network/src/modules/NetworkInterfaces.rb:1217 msgid "Channel to Channel Interface (CTC)" msgstr "CTC(Channel to Channel Interface)" -#: library/network/src/modules/NetworkInterfaces.rb:1220 +#: library/network/src/modules/NetworkInterfaces.rb:1220 msgid "DSL Connection" msgstr "DSL 연결" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1222 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1222 msgid "Dummy" msgstr "더미" -#: library/network/src/modules/NetworkInterfaces.rb:1222 +#: library/network/src/modules/NetworkInterfaces.rb:1222 msgid "Dummy Network Device" msgstr "더미 네트워크 장치" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1225 -#: library/system/src/include/hwinfo/classnames.rb:227 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1225 +#: library/system/src/include/hwinfo/classnames.rb:227 msgid "ESCON" msgstr "ESCON" -#: library/network/src/modules/NetworkInterfaces.rb:1226 +#: library/network/src/modules/NetworkInterfaces.rb:1226 msgid "Enterprise System Connector (ESCON)" msgstr "ESCON(Enterprise System Connector)" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1230 -#: library/system/src/include/hwinfo/classnames.rb:220 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1230 +#: library/system/src/include/hwinfo/classnames.rb:220 msgid "Ethernet" msgstr "이더넷" -#: library/network/src/modules/NetworkInterfaces.rb:1231 +#: library/network/src/modules/NetworkInterfaces.rb:1231 msgid "Ethernet Network Card" msgstr "이더넷 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1234 -#: library/system/src/include/hwinfo/classnames.rb:222 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1234 +#: library/system/src/include/hwinfo/classnames.rb:222 msgid "FDDI" msgstr "FDDI" -#: library/network/src/modules/NetworkInterfaces.rb:1234 +#: library/network/src/modules/NetworkInterfaces.rb:1234 msgid "FDDI Network Card" msgstr "FDDI 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1237 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1237 msgid "FICON" msgstr "FICON" -#: library/network/src/modules/NetworkInterfaces.rb:1238 +#: library/network/src/modules/NetworkInterfaces.rb:1238 msgid "Fiberchannel System Connector (FICON)" msgstr "FICON(Fiberchannel System Connector)" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1242 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1242 msgid "HIPPI" msgstr "HIPPI" -#: library/network/src/modules/NetworkInterfaces.rb:1243 +#: library/network/src/modules/NetworkInterfaces.rb:1243 msgid "HIgh Performance Parallel Interface (HIPPI)" msgstr "HIPPI(HIgh Performance Parallel Interface)" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1247 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1247 msgid "Hipersockets" msgstr "하이퍼소켓" -#: library/network/src/modules/NetworkInterfaces.rb:1248 +#: library/network/src/modules/NetworkInterfaces.rb:1248 msgid "Hipersockets Interface (HSI)" msgstr "HSI(Hipersockets Interface)" -#: library/network/src/modules/NetworkInterfaces.rb:1251 -#: library/network/src/modules/NetworkInterfaces.rb:1257 -#: library/network/src/modules/NetworkInterfaces.rb:1272 +#: library/network/src/modules/NetworkInterfaces.rb:1251 +#: library/network/src/modules/NetworkInterfaces.rb:1257 +#: library/network/src/modules/NetworkInterfaces.rb:1272 msgid "ISDN Connection" msgstr "ISDN 연결" -#. Device type label -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1253 -#: library/network/src/modules/NetworkInterfaces.rb:1255 +#. Device type label +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1253 +#: library/network/src/modules/NetworkInterfaces.rb:1255 msgid "IrDA" msgstr "IrDA" -#: library/network/src/modules/NetworkInterfaces.rb:1253 +#: library/network/src/modules/NetworkInterfaces.rb:1253 msgid "Infrared Network Device" msgstr "적외선 네트워크 장치" -#: library/network/src/modules/NetworkInterfaces.rb:1255 +#: library/network/src/modules/NetworkInterfaces.rb:1255 msgid "Infrared Device" msgstr "적외선 장치" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1260 -#: library/system/src/include/hwinfo/classnames.rb:224 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1260 +#: library/system/src/include/hwinfo/classnames.rb:224 msgid "IUCV" msgstr "IUCV" -#: library/network/src/modules/NetworkInterfaces.rb:1261 +#: library/network/src/modules/NetworkInterfaces.rb:1261 msgid "Inter User Communication Vehicle (IUCV)" msgstr "IUCV(Inter User Communication Vehicle)" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1264 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1264 msgid "OSA LCS" msgstr "OSA LCS" -#: library/network/src/modules/NetworkInterfaces.rb:1264 +#: library/network/src/modules/NetworkInterfaces.rb:1264 msgid "OSA LCS Network Card" msgstr "OSA LCS 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1266 -#: library/system/src/include/hwinfo/classnames.rb:219 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1266 +#: library/system/src/include/hwinfo/classnames.rb:219 msgid "Loopback" msgstr "루프백" -#: library/network/src/modules/NetworkInterfaces.rb:1266 +#: library/network/src/modules/NetworkInterfaces.rb:1266 msgid "Loopback Device" msgstr "루프백 장치" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1270 -#: library/system/src/include/hwinfo/classnames.rb:228 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1270 +#: library/system/src/include/hwinfo/classnames.rb:228 msgid "Myrinet" msgstr "Myrinet" -#: library/network/src/modules/NetworkInterfaces.rb:1270 +#: library/network/src/modules/NetworkInterfaces.rb:1270 msgid "Myrinet Network Card" msgstr "Myrinet 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1275 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1275 msgid "Parallel Line" msgstr "병렬 라인" -#: library/network/src/modules/NetworkInterfaces.rb:1276 +#: library/network/src/modules/NetworkInterfaces.rb:1276 msgid "Parallel Line Connection" msgstr "병렬 라인 연결" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1282 -#: library/system/src/include/hwinfo/classnames.rb:226 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1282 +#: library/system/src/include/hwinfo/classnames.rb:226 msgid "QETH" msgstr "QETH" -#: library/network/src/modules/NetworkInterfaces.rb:1283 +#: library/network/src/modules/NetworkInterfaces.rb:1283 msgid "OSA-Express or QDIO Device (QETH)" msgstr "OSA-Express 또는 QDIO 장치(QETH)" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1287 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1287 msgid "IPv6-in-IPv4" msgstr "IPv6-in-IPv4" -#: library/network/src/modules/NetworkInterfaces.rb:1288 +#: library/network/src/modules/NetworkInterfaces.rb:1288 msgid "IPv6-in-IPv4 Encapsulation Device" msgstr "IPv6-in-IPv4 캡슐화 장치" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1292 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1292 msgid "Serial Line" msgstr "직렬 라인" -#: library/network/src/modules/NetworkInterfaces.rb:1293 +#: library/network/src/modules/NetworkInterfaces.rb:1293 msgid "Serial Line Connection" msgstr "직렬 라인 연결" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1297 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1297 msgid "Token Ring" msgstr "토큰링" -#: library/network/src/modules/NetworkInterfaces.rb:1298 +#: library/network/src/modules/NetworkInterfaces.rb:1298 msgid "Token Ring Network Card" msgstr "토큰링 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1301 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1301 msgid "USB" msgstr "USB" -#: library/network/src/modules/NetworkInterfaces.rb:1301 +#: library/network/src/modules/NetworkInterfaces.rb:1301 msgid "USB Network Device" msgstr "USB 네트워크 장치" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1303 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1303 msgid "VMWare" msgstr "VMWare" -#: library/network/src/modules/NetworkInterfaces.rb:1303 +#: library/network/src/modules/NetworkInterfaces.rb:1303 msgid "VMWare Network Device" msgstr "VMWare 네트워크 장치" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1306 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1306 msgid "Wireless" msgstr "무선" -#: library/network/src/modules/NetworkInterfaces.rb:1307 +#: library/network/src/modules/NetworkInterfaces.rb:1307 msgid "Wireless Network Card" msgstr "무선 네트워크 카드" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1310 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1310 msgid "XPNET" msgstr "XPNET" -#: library/network/src/modules/NetworkInterfaces.rb:1310 +#: library/network/src/modules/NetworkInterfaces.rb:1310 msgid "XP Network" msgstr "XP 네트워크" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1312 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1312 msgid "VLAN" msgstr "VLAN" -#: library/network/src/modules/NetworkInterfaces.rb:1312 +#: library/network/src/modules/NetworkInterfaces.rb:1312 msgid "Virtual LAN" msgstr "가상 LAN" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1314 -#: library/system/src/include/hwinfo/classnames.rb:89 -#: library/system/src/include/hwinfo/classnames.rb:101 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1314 +#: library/system/src/include/hwinfo/classnames.rb:89 +#: library/system/src/include/hwinfo/classnames.rb:101 msgid "Bridge" msgstr "브리지" -#: library/network/src/modules/NetworkInterfaces.rb:1314 +#: library/network/src/modules/NetworkInterfaces.rb:1314 msgid "Network Bridge" msgstr "네트워크 브리지" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1316 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1316 msgid "TUN" msgstr "TUN" -#: library/network/src/modules/NetworkInterfaces.rb:1316 +#: library/network/src/modules/NetworkInterfaces.rb:1316 msgid "Network TUNnel" msgstr "네트워크 터널" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1318 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1318 msgid "TAP" msgstr "TAP" -#: library/network/src/modules/NetworkInterfaces.rb:1318 +#: library/network/src/modules/NetworkInterfaces.rb:1318 msgid "Network TAP" msgstr "네트워크 TAP" -#. Device type label -#: library/network/src/modules/NetworkInterfaces.rb:1320 -#: library/system/src/include/hwinfo/classnames.rb:152 +#. Device type label +#: library/network/src/modules/NetworkInterfaces.rb:1320 +#: library/system/src/include/hwinfo/classnames.rb:152 msgid "InfiniBand" msgstr "InfiniBand" -#: library/network/src/modules/NetworkInterfaces.rb:1320 +#: library/network/src/modules/NetworkInterfaces.rb:1320 msgid "InfiniBand Device" msgstr "InfiniBand 장치" -#. TRANSLATORS: Informs that device name is not known -#: library/network/src/modules/NetworkPopup.rb:71 +#. TRANSLATORS: Informs that device name is not known +#: library/network/src/modules/NetworkPopup.rb:71 msgid "Unknown device" msgstr "알수 없는 장치" -#. TRANSLATORS: Informs that the IP address is assigned via DHCP -#: library/network/src/modules/NetworkPopup.rb:80 +#. TRANSLATORS: Informs that the IP address is assigned via DHCP +#: library/network/src/modules/NetworkPopup.rb:80 msgid "DHCP address" msgstr "DHCP 주소" -#. TRANSLATORS: table item, informing that device has no IP address -#: library/network/src/modules/NetworkPopup.rb:87 +#. TRANSLATORS: table item, informing that device has no IP address +#: library/network/src/modules/NetworkPopup.rb:87 msgid "No IP address assigned" msgstr "할당된 IP 주소 없음" -#. translators: table header - details about the network device -#: library/network/src/modules/NetworkPopup.rb:109 +#. translators: table header - details about the network device +#: library/network/src/modules/NetworkPopup.rb:109 msgid "Device Type" msgstr "장치 종류" -#: library/network/src/modules/NetworkPopup.rb:110 +#: library/network/src/modules/NetworkPopup.rb:110 msgid "Device Name" msgstr "장치 이름" -#: library/network/src/modules/NetworkPopup.rb:111 +#: library/network/src/modules/NetworkPopup.rb:111 msgid "IP Address" msgstr "IP 주소" -#: library/network/src/modules/NetworkPopup.rb:112 +#: library/network/src/modules/NetworkPopup.rb:112 msgid "Device ID" msgstr "장치 ID" -#: library/network/src/modules/NetworkPopup.rb:113 +#: library/network/src/modules/NetworkPopup.rb:113 msgid "Connected" msgstr "연결됨" -#. label message -#. label message -#: library/network/src/modules/NetworkPopup.rb:195 -#: library/network/src/modules/NetworkPopup.rb:226 +#. label message +#. label message +#: library/network/src/modules/NetworkPopup.rb:195 +#: library/network/src/modules/NetworkPopup.rb:226 msgid "Scanning for hosts on this LAN..." msgstr "이 LAN상에서 호스트 검색중..." -#. selection box label -#: library/network/src/modules/NetworkPopup.rb:214 +#. selection box label +#: library/network/src/modules/NetworkPopup.rb:214 msgid "&NFS Servers" msgstr "NFS 서버들(&N)" -#. selection box label -#: library/network/src/modules/NetworkPopup.rb:238 +#. selection box label +#: library/network/src/modules/NetworkPopup.rb:238 msgid "Re&mote Hosts" msgstr "원격 호스트들(&M)" -#. selection box label -#: library/network/src/modules/NetworkPopup.rb:258 +#. selection box label +#: library/network/src/modules/NetworkPopup.rb:258 msgid "&Exported Directories" msgstr "내보낸 디렉토리(&E)" -#. TRANSLATORS: pop-up question when reading the service configuration -#: library/network/src/modules/NetworkService.rb:281 +#. TRANSLATORS: pop-up question when reading the service configuration +#: library/network/src/modules/NetworkService.rb:281 msgid "" "Your network interfaces are currently controlled by NetworkManager\n" "but the service to configure might not work well with it.\n" @@ -2951,10 +2911,10 @@ " \n" " 계속하시겠습니까?" -#. If there is network running, return true. -#. Otherwise show error popup depending on Stage and return false -#. @return true if network running -#: library/network/src/modules/NetworkService.rb:346 +#. If there is network running, return true. +#. Otherwise show error popup depending on Stage and return false +#. @return true if network running +#: library/network/src/modules/NetworkService.rb:346 msgid "" "No running network detected.\n" "Restart installation and configure network in Linuxrc\n" @@ -2964,7 +2924,7 @@ "설치를 다시 시작하고 Linuxrc에서 네트워크를 구성하거나\n" "네트워크 없이 계속 진행하십시오." -#: library/network/src/modules/NetworkService.rb:352 +#: library/network/src/modules/NetworkService.rb:352 msgid "" "No running network detected.\n" "Configure network with YaST or Network Manager plug-in\n" @@ -2976,8 +2936,8 @@ "네트워크를 구성하고 이 모듈을 다시 시작하거나\n" "네트워크 없이 계속 진행하십시오." -#. TRANSLATORS: popup informing message, allowed characters for port-names -#: library/network/src/modules/PortAliases.rb:136 +#. TRANSLATORS: popup informing message, allowed characters for port-names +#: library/network/src/modules/PortAliases.rb:136 msgid "" "A port name may consist of the characters 'a-z', 'A-Z', '0-9', and '*+._-'.\n" "A port number may be a number from 0 to 65535.\n" @@ -2987,161 +2947,125 @@ "포트 번호는 0에서 65535 사이의 숫자입니다.\n" " 공백은 사용할 수 없습니다.\n" -#. TRANSLATORS: Warning in installation proposal, %1 is a device name (eth0, sl0, ...) -#: library/network/src/modules/SuSEFirewallProposal.rb:167 +#. TRANSLATORS: Warning in installation proposal, %1 is a device name (eth0, sl0, ...) +#: library/network/src/modules/SuSEFirewallProposal.rb:167 msgid "New network device '%1' found; added as an internal firewall interface" -msgstr "" -"새 네트워크 장치 '%1'이(가) 발견되었으며, 내부 방화벽 인터페이스로 추가되었습" -"니다." +msgstr "새 네트워크 장치 '%1'이(가) 발견되었으며, 내부 방화벽 인터페이스로 추가되었습니다." -#. TRANSLATORS: Warning in installation proposal, %1 is a device name (eth0, sl0, ...) -#: library/network/src/modules/SuSEFirewallProposal.rb:178 +#. TRANSLATORS: Warning in installation proposal, %1 is a device name (eth0, sl0, ...) +#: library/network/src/modules/SuSEFirewallProposal.rb:178 msgid "New network device '%1' found; added as an external firewall interface" -msgstr "" -"새 네트워크 장치 '%1'이(가) 발견되었으며, 외부 방화벽 인터페이스로 추가되었습" -"니다." +msgstr "새 네트워크 장치 '%1'이(가) 발견되었으며, 외부 방화벽 인터페이스로 추가되었습니다." -#. TRANSLATORS: Proposal informative text -#: library/network/src/modules/SuSEFirewallProposal.rb:547 +#. TRANSLATORS: Proposal informative text +#: library/network/src/modules/SuSEFirewallProposal.rb:547 msgid "SuSEfirewall2 package is not installed, firewall will be disabled." msgstr "SuSEfirewall2 패키지가 설치되지 않았습니다. 방화벽이 비활성화됩니다." -#. TRANSLATORS: Proposal informative text "Firewall is enabled (disable)" with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:565 -msgid "" -"Firewall is enabled (disable</a>)" -msgstr "" -"방화벽이 활성화됨(비활성화" -"</a>)" +#. TRANSLATORS: Proposal informative text "Firewall is enabled (disable)" with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:565 +msgid "Firewall is enabled (disable</a>)" +msgstr "방화벽이 활성화됨(비활성화</a>)" -#. TRANSLATORS: Proposal informative text "Firewall is disabled (enable)" with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:571 -msgid "" -"Firewall is disabled (enable</a>)" -msgstr "" -"방화벽이 비활성화됨(활성화" -"</a>)" +#. TRANSLATORS: Proposal informative text "Firewall is disabled (enable)" with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:571 +msgid "Firewall is disabled (enable</a>)" +msgstr "방화벽이 비활성화됨(활성화</a>)" -#. TRANSLATORS: Network proposal informative text with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:606 -msgid "" -"SSH port is open (close</a>)" -msgstr "" -"SSH 포트가 열림(닫기</a>)" +#. TRANSLATORS: Network proposal informative text with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:606 +msgid "SSH port is open (close</a>)" +msgstr "SSH 포트가 열림(닫기</a>)" -#. TRANSLATORS: Network proposal informative text with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:612 -msgid "" -"SSH port is blocked (open</a>)" +#. TRANSLATORS: Network proposal informative text with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:612 +msgid "SSH port is blocked (open</a>)" msgstr "SSH 포트가 닫힘(열기</a>)" -#. TRANSLATORS: Network proposal informative text with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:633 +#. TRANSLATORS: Network proposal informative text with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:633 msgid "" -"SSH port is open (close</a>), " -"but\n" +"SSH port is open (close</a>), but\n" "there are no network interfaces configured" msgstr "" -"SSH 포트는 열려 있지만(닫기)\n" +"SSH 포트는 열려 있지만(닫기</a>)\n" "네트워크 인터페이스가 구성되지 않았습니다." -#. TRANSLATORS: This is a warning message. Installation over SSH without SSH allowed on firewall -#: library/network/src/modules/SuSEFirewallProposal.rb:648 -msgid "" -"You are installing a system over SSH, but you have not opened the SSH port " -"on the firewall." -msgstr "" -"SSH를 통해 시스템을 설치 중이지만 방화벽에서 SSH 포트가 열리지 않았습니다." +#. TRANSLATORS: This is a warning message. Installation over SSH without SSH allowed on firewall +#: library/network/src/modules/SuSEFirewallProposal.rb:648 +msgid "You are installing a system over SSH, but you have not opened the SSH port on the firewall." +msgstr "SSH를 통해 시스템을 설치 중이지만 방화벽에서 SSH 포트가 열리지 않았습니다." -#. TRANSLATORS: Network proposal informative text "Remote Administration (VNC) is enabled" with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:690 -msgid "" -"Remote Administration (VNC) ports are open (close</a>)" -msgstr "" -"원격 관리(VNC) 포트가 열림(닫기" -"</a>)" +#. TRANSLATORS: Network proposal informative text "Remote Administration (VNC) is enabled" with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:690 +msgid "Remote Administration (VNC) ports are open (close</a>)" +msgstr "원격 관리(VNC) 포트가 열림(닫기</a>)" -#. TRANSLATORS: Network proposal informative text "Remote Administration (VNC) is disabled" with link around -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: library/network/src/modules/SuSEFirewallProposal.rb:696 -msgid "" -"Remote Administration (VNC) ports are blocked (open</a>)" -msgstr "" -"원격 관리(VNC) 포트가 닫힘(열기" -"</a>)" +#. TRANSLATORS: Network proposal informative text "Remote Administration (VNC) is disabled" with link around +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: library/network/src/modules/SuSEFirewallProposal.rb:696 +msgid "Remote Administration (VNC) ports are blocked (open</a>)" +msgstr "원격 관리(VNC) 포트가 닫힘(열기</a>)" -#. TRANSLATORS: This is a warning message. Installation over VNC without VNC allowed on firewall -#: library/network/src/modules/SuSEFirewallProposal.rb:707 -msgid "" -"You are installing a system using remote administration (VNC), but you have " -"not opened the VNC ports on the firewall." -msgstr "" -"원격 관리(VNC)를 통해 시스템을 설치 중이지만 방화벽에서 VNC 포트가 열리지 않" -"았습니다." +#. TRANSLATORS: This is a warning message. Installation over VNC without VNC allowed on firewall +#: library/network/src/modules/SuSEFirewallProposal.rb:707 +msgid "You are installing a system using remote administration (VNC), but you have not opened the VNC ports on the firewall." +msgstr "원격 관리(VNC)를 통해 시스템을 설치 중이지만 방화벽에서 VNC 포트가 열리지 않았습니다." -#. TRANSLATORS: Network proposal informative text -#: library/network/src/modules/SuSEFirewallProposal.rb:725 +#. TRANSLATORS: Network proposal informative text +#: library/network/src/modules/SuSEFirewallProposal.rb:725 msgid "iSCSI Target ports are open" msgstr "iSCSI 대상 포트가 열려 있습니다." -#. TRANSLATORS: Network proposal informative text -#: library/network/src/modules/SuSEFirewallProposal.rb:728 +#. TRANSLATORS: Network proposal informative text +#: library/network/src/modules/SuSEFirewallProposal.rb:728 msgid "iSCSI Target ports are blocked" msgstr "iSCSI 대상 포트가 차단되었습니다." -#. TRANSLATORS: This is a warning message. Installation to iSCSI without iSCSI allowed on firewall -#: library/network/src/modules/SuSEFirewallProposal.rb:737 -msgid "" -"You are installing a system using iSCSI Target, but you have not opened the " -"needed ports on the firewall." -msgstr "" -"iSCSI 대상을 사용하여 시스템을 설치 중이지만 방화벽에서 필요한 포트를 열지 않" -"았습니다." +#. TRANSLATORS: This is a warning message. Installation to iSCSI without iSCSI allowed on firewall +#: library/network/src/modules/SuSEFirewallProposal.rb:737 +msgid "You are installing a system using iSCSI Target, but you have not opened the needed ports on the firewall." +msgstr "iSCSI 대상을 사용하여 시스템을 설치 중이지만 방화벽에서 필요한 포트를 열지 않았습니다." -#. the message is followed by list of required packages -#. Popup Text -#: library/packages/src/include/packages/common.rb:106 -#: library/packages/src/include/packages/common.rb:135 +#. the message is followed by list of required packages +#. Popup Text +#: library/packages/src/include/packages/common.rb:106 +#: library/packages/src/include/packages/common.rb:135 msgid "These packages need to be installed:" msgstr "다음 패키지를 설치해야 합니다.:" -#. the message is followed by list of required packages -#. Popup Text -#: library/packages/src/include/packages/common.rb:109 -#: library/packages/src/include/packages/common.rb:137 +#. the message is followed by list of required packages +#. Popup Text +#: library/packages/src/include/packages/common.rb:109 +#: library/packages/src/include/packages/common.rb:137 msgid "These packages need to be removed:" msgstr "다음 패키지를 제거해야 합니다." -#. labels changed for bug #215195 -#. Label::ContinueButton (), Label::CancelButton (), -#. push button label -#: library/packages/src/include/packages/common.rb:158 +#. labels changed for bug #215195 +#. Label::ContinueButton (), Label::CancelButton (), +#. push button label +#: library/packages/src/include/packages/common.rb:158 msgid "&Uninstall" msgstr "제거(&U)" -#. TRANSLATORS: progress bar label -#: library/packages/src/lib/packages/file_conflict_callbacks.rb:78 +#. TRANSLATORS: progress bar label +#: library/packages/src/lib/packages/file_conflict_callbacks.rb:78 msgid "Checking file conflicts..." msgstr "파일 충돌 확인 중..." -#. TRANSLATORS: help text for the file conflict detection progress -#: library/packages/src/lib/packages/file_conflict_callbacks.rb:89 +#. TRANSLATORS: help text for the file conflict detection progress +#: library/packages/src/lib/packages/file_conflict_callbacks.rb:89 msgid "<p>Detecting the file conflicts is in progress.</p>" msgstr "<p>파일 충돌 검색이 진행 중입니다.</p>" -#. TRANSLATORS: An error message, %s is the actual list of detected conflicts -#: library/packages/src/lib/packages/file_conflict_callbacks.rb:134 +#. TRANSLATORS: An error message, %s is the actual list of detected conflicts +#: library/packages/src/lib/packages/file_conflict_callbacks.rb:134 msgid "" "File conflicts detected, these conflicting files will be overwritten:\n" "\n" @@ -3151,8 +3075,8 @@ "\n" "%s" -#. TRANSLATORS: A popup label, use max. 70 chars per line, use more lines if needed -#: library/packages/src/lib/packages/file_conflict_callbacks.rb:171 +#. TRANSLATORS: A popup label, use max. 70 chars per line, use more lines if needed +#: library/packages/src/lib/packages/file_conflict_callbacks.rb:171 msgid "" "File conflicts happen when two packages attempt to install\n" "files with the same name but different contents. If you continue\n" @@ -3162,65 +3086,65 @@ "내용이 다른 파일을 설치하려고 할 때 발생합니다.\n" "계속하면 충돌하는 파일이 바뀌고 이전 내용이 손실됩니다." -#. TRANSLATORS: Popup heading -#: library/packages/src/lib/packages/file_conflict_callbacks.rb:176 +#. TRANSLATORS: Popup heading +#: library/packages/src/lib/packages/file_conflict_callbacks.rb:176 msgid "A File Conflict Detected" msgid_plural "File Conflicts Detected" msgstr[0] "파일 충돌이 검색됨" -#. Convert one message to richtext -#. -#. @return [String] Message converted to richtext -#: library/packages/src/lib/packages/update_messages_view.rb:35 +#. Convert one message to richtext +#. +#. @return [String] Message converted to richtext +#: library/packages/src/lib/packages/update_messages_view.rb:35 msgid "This message will be available at %s" msgstr "이 메시지는 %s에서 사용할 수 있습니다." -#. -------------------------------------------------------------------------- -#. defaults -#. at start of file providal -#: library/packages/src/modules/PackageCallbacks.rb:150 -#: library/packages/src/modules/PackageCallbacks.rb:158 +#. -------------------------------------------------------------------------- +#. defaults +#. at start of file providal +#: library/packages/src/modules/PackageCallbacks.rb:150 +#: library/packages/src/modules/PackageCallbacks.rb:158 msgid "Downloading package %1 (%2)..." msgstr "%1(%2) 패키지 다운로드 중..." -#. popup heading -#: library/packages/src/modules/PackageCallbacks.rb:162 +#. popup heading +#: library/packages/src/modules/PackageCallbacks.rb:162 msgid "Downloading Package" msgstr "패키지 다운로드 중" -#. error message, %1 is a package name -#: library/packages/src/modules/PackageCallbacks.rb:221 +#. error message, %1 is a package name +#: library/packages/src/modules/PackageCallbacks.rb:221 msgid "Package %1 is broken, integrity check has failed." msgstr "%1 패키지가 손상되었습니다. 무결성 검사가 실패했습니다." -#. command line mode - ask user whether installation of the failed package should be retried -#. command line mode - ask user whether installation of the failed package should be retried -#: library/packages/src/modules/PackageCallbacks.rb:233 -#: library/packages/src/modules/PackageCallbacks.rb:448 +#. command line mode - ask user whether installation of the failed package should be retried +#. command line mode - ask user whether installation of the failed package should be retried +#: library/packages/src/modules/PackageCallbacks.rb:233 +#: library/packages/src/modules/PackageCallbacks.rb:448 msgid "Retry installation of the package?" msgstr "패키지 설치를 다시 시도하시겠습니까?" -#. command line mode - ask user whether the installation should be aborted -#. command line mode - ask user whether the installation should be aborted -#: library/packages/src/modules/PackageCallbacks.rb:241 -#: library/packages/src/modules/PackageCallbacks.rb:456 +#. command line mode - ask user whether the installation should be aborted +#. command line mode - ask user whether the installation should be aborted +#: library/packages/src/modules/PackageCallbacks.rb:241 +#: library/packages/src/modules/PackageCallbacks.rb:456 msgid "Abort the installation?" msgstr "설치를 중단하시겠습니까?" -#. otherwise return Ignore (default) -#. error message, %1 is code of the error, -#. detail string is appended to the end -#. error message, %1 is code of the error, -#. detail string is appended to the end -#: library/packages/src/modules/PackageCallbacks.rb:269 -#: library/packages/src/modules/PackageCallbacks.rb:303 -#: library/packages/src/modules/PackageCallbacks.rb:2136 +#. otherwise return Ignore (default) +#. error message, %1 is code of the error, +#. detail string is appended to the end +#. error message, %1 is code of the error, +#. detail string is appended to the end +#: library/packages/src/modules/PackageCallbacks.rb:269 +#: library/packages/src/modules/PackageCallbacks.rb:303 +#: library/packages/src/modules/PackageCallbacks.rb:2136 msgid "Error: %1:" msgstr "오류: %1:" -#. TODO: add "Don't show again" checkbox -#. a warning popup displayed after pressing [Ignore] after a download error -#: library/packages/src/modules/PackageCallbacks.rb:327 +#. TODO: add "Don't show again" checkbox +#. a warning popup displayed after pressing [Ignore] after a download error +#: library/packages/src/modules/PackageCallbacks.rb:327 msgid "" "Ignoring a download failure may result in a broken system.\n" "Verify the system later by running the Software Management module.\n" @@ -3228,85 +3152,80 @@ "다운로드 실패를 무시하면 시스템이 손상될 수 있습니다.\n" "나중에 소프트웨어 관리 모듈을 실행하여 시스템을 확인하십시오.\n" -#. At start of package install. -#: library/packages/src/modules/PackageCallbacks.rb:365 +#. At start of package install. +#: library/packages/src/modules/PackageCallbacks.rb:365 msgid "Uninstalling package %1 (%2)..." msgstr "%1(%2) 패키지 제거 중..." -#: library/packages/src/modules/PackageCallbacks.rb:367 +#: library/packages/src/modules/PackageCallbacks.rb:367 msgid "Installing package %1 (%2)..." msgstr "%1(%2) 패키지 설치 중..." -#: library/packages/src/modules/PackageCallbacks.rb:375 +#: library/packages/src/modules/PackageCallbacks.rb:375 msgid "Uninstalling Package" msgstr "패키지 제거 중" -#: library/packages/src/modules/PackageCallbacks.rb:375 +#: library/packages/src/modules/PackageCallbacks.rb:375 msgid "Installing Package" msgstr "패키지 설치 중" -#. error popup during package installation, %1 is the name of the package -#: library/packages/src/modules/PackageCallbacks.rb:431 +#. error popup during package installation, %1 is the name of the package +#: library/packages/src/modules/PackageCallbacks.rb:431 msgid "Removal of package %1 failed." msgstr "%1 패키지를 제거하지 못했습니다." -#. error popup during package installation, %1 is the name of the package -#: library/packages/src/modules/PackageCallbacks.rb:434 +#. error popup during package installation, %1 is the name of the package +#: library/packages/src/modules/PackageCallbacks.rb:434 msgid "Installation of package %1 failed." msgstr "%1 패키지를 설치하지 못했습니다." -#. TODO: add "Don't show again" checkbox -#. a warning popup displayed after pressing [Ignore] after a package installation error -#: library/packages/src/modules/PackageCallbacks.rb:507 +#. TODO: add "Don't show again" checkbox +#. a warning popup displayed after pressing [Ignore] after a package installation error +#: library/packages/src/modules/PackageCallbacks.rb:507 msgid "" "Ignoring a package failure may result in a broken system.\n" -"The system should be later verified by running the Software Management " -"module." +"The system should be later verified by running the Software Management module." msgstr "" "패키지 오류를 무시하면 시스템이 손상될 수 있습니다.\n" "나중에 소프트웨어 관리 모듈을 실행하여 시스템을 확인해야 합니다." -#. error report -#: library/packages/src/modules/PackageCallbacks.rb:576 +#. error report +#: library/packages/src/modules/PackageCallbacks.rb:576 msgid "" "<p>The repository at the specified URL now provides a different media ID.\n" -"If the URL is correct, this indicates that the repository content has " -"changed. To \n" -"continue using this repository, start <b>Installation Repositories</b> " -"from \n" +"If the URL is correct, this indicates that the repository content has changed. To \n" +"continue using this repository, start <b>Installation Repositories</b> from \n" "the YaST control center and refresh the repository.</p>\n" msgstr "" "<p>지정한 URL의 리포지토리에서 다른 미디어 ID를 제공합니다.\n" -"URL이 올바를 경우 리포지토리 컨텐트가 변경된 것입니다. 이 리포지토리를 계" -"속 \n" -"사용하려면 YaST 관리 센터에서 <b>설치 리포지토리</b>를 시작하여 리포지토리" -"를 \n" +"URL이 올바를 경우 리포지토리 컨텐트가 변경된 것입니다. 이 리포지토리를 계속 \n" +"사용하려면 YaST 관리 센터에서 <b>설치 리포지토리</b>를 시작하여 리포지토리를 \n" "새로 고치십시오.</p>\n" -#. media is double sided, we want the user to insert the 'Side A' of the media -#. the complete string will be "<product> <media> <number>, <side>" -#. e.g. "'SuSE Linux 9.0' DVD 1, Side A" -#: library/packages/src/modules/PackageCallbacks.rb:591 +#. media is double sided, we want the user to insert the 'Side A' of the media +#. the complete string will be "<product> <media> <number>, <side>" +#. e.g. "'SuSE Linux 9.0' DVD 1, Side A" +#: library/packages/src/modules/PackageCallbacks.rb:591 msgid "Side A" msgstr "A면" -#. media is double sided, we want the user to insert the 'Side B' of the media -#: library/packages/src/modules/PackageCallbacks.rb:594 +#. media is double sided, we want the user to insert the 'Side B' of the media +#: library/packages/src/modules/PackageCallbacks.rb:594 msgid "Side B" msgstr "B면" -#. label for a repository - %1 product name (e.g. openSUSE 10.2), %2 medium number (e.g. 2) -#: library/packages/src/modules/PackageCallbacks.rb:609 +#. label for a repository - %1 product name (e.g. openSUSE 10.2), %2 medium number (e.g. 2) +#: library/packages/src/modules/PackageCallbacks.rb:609 msgid "%1 (Disc %2)" msgstr "%1(디스크 %2)" -#. label for a repository - %1 product name (e.g. openSUSE 10.2), %2 medium number (e.g. 2) -#: library/packages/src/modules/PackageCallbacks.rb:612 +#. label for a repository - %1 product name (e.g. openSUSE 10.2), %2 medium number (e.g. 2) +#: library/packages/src/modules/PackageCallbacks.rb:612 msgid "%1 (Medium %2)" msgstr "%1(매체 %2)" -#. prompt to insert product (%1 == "SuSE Linux version 9.2 CD 2") -#: library/packages/src/modules/PackageCallbacks.rb:618 +#. prompt to insert product (%1 == "SuSE Linux version 9.2 CD 2") +#: library/packages/src/modules/PackageCallbacks.rb:618 msgid "" "Insert\n" "'%1'" @@ -3314,8 +3233,8 @@ "'%1'을(를)\n" "넣으십시오." -#. report error while accessing local directory with product (%1 = URL, %2 = "SuSE Linux ...") -#: library/packages/src/modules/PackageCallbacks.rb:623 +#. report error while accessing local directory with product (%1 = URL, %2 = "SuSE Linux ...") +#: library/packages/src/modules/PackageCallbacks.rb:623 msgid "" "Cannot access installation media\n" "%1\n" @@ -3327,8 +3246,8 @@ "%2.\n" "디렉토리에 액세스할 수 있는지 확인해주십시오." -#. report error while accessing network media of product (%1 = URL, %2 = "SuSE Linux ...") -#: library/packages/src/modules/PackageCallbacks.rb:635 +#. report error while accessing network media of product (%1 = URL, %2 = "SuSE Linux ...") +#: library/packages/src/modules/PackageCallbacks.rb:635 msgid "" "Cannot access installation media \n" "%1\n" @@ -3340,178 +3259,178 @@ "%2.\n" "서버에 액세스할 수 있는지 확인해주십시오." -#. wrong media id, offer "Ignore" -#. push button label -#: library/packages/src/modules/PackageCallbacks.rb:660 -#: library/packages/src/modules/PackageCallbacks.rb:1835 +#. wrong media id, offer "Ignore" +#. push button label +#: library/packages/src/modules/PackageCallbacks.rb:660 +#: library/packages/src/modules/PackageCallbacks.rb:1835 msgid "Skip Autorefresh" msgstr "새로 고침 건너뛰기" -#. menu button label - used for more then one device -#. push button label - in the media change popup, user can eject the CD/DVD -#: library/packages/src/modules/PackageCallbacks.rb:679 -#: library/packages/src/modules/PackageCallbacks.rb:682 +#. menu button label - used for more then one device +#. push button label - in the media change popup, user can eject the CD/DVD +#: library/packages/src/modules/PackageCallbacks.rb:679 +#: library/packages/src/modules/PackageCallbacks.rb:682 msgid "&Eject" msgstr "꺼내기(&E)" -#: library/packages/src/modules/PackageCallbacks.rb:689 +#: library/packages/src/modules/PackageCallbacks.rb:689 msgid "A&utomatically Eject CD or DVD Medium" msgstr "CD 또는 DVD 매체를 자동으로 꺼내기(&U)" -#. command line mode - ask user whether installation of the failed package should be retried -#: library/packages/src/modules/PackageCallbacks.rb:756 +#. command line mode - ask user whether installation of the failed package should be retried +#: library/packages/src/modules/PackageCallbacks.rb:756 msgid "Retry the installation?" msgstr "설치를 다시 시도하시겠습니까?" -#. command line mode - ask user whether the installation should be aborted -#: library/packages/src/modules/PackageCallbacks.rb:764 +#. command line mode - ask user whether the installation should be aborted +#: library/packages/src/modules/PackageCallbacks.rb:764 msgid "Skip the medium?" msgstr "매체를 건너뛰시겠습니까?" -#. otherwise ignore the medium -#: library/packages/src/modules/PackageCallbacks.rb:771 +#. otherwise ignore the medium +#: library/packages/src/modules/PackageCallbacks.rb:771 msgid "Ignoring the bad medium..." msgstr "잘못된 매체 무시 중..." -#. TextEntry label -#. TextEntry label -#: library/packages/src/modules/PackageCallbacks.rb:792 -#: library/packages/src/modules/PackageCallbacks.rb:848 +#. TextEntry label +#. TextEntry label +#: library/packages/src/modules/PackageCallbacks.rb:792 +#: library/packages/src/modules/PackageCallbacks.rb:848 msgid "&URL" msgstr "URL(&U)" -#. popup label (%1 is repository URL) -#: library/packages/src/modules/PackageCallbacks.rb:1040 +#. popup label (%1 is repository URL) +#: library/packages/src/modules/PackageCallbacks.rb:1040 msgid "Creating Repository %1" msgstr "%1 리포지토리 생성 중" -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1073 +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1073 msgid "An error occurred while creating the repository." msgstr "리포지토리를 생성하는 중 오류가 발생했습니다." -#. error message - a label followed by a richtext with details -#. error message - a label followed by a richtext with details -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1077 -#: library/packages/src/modules/PackageCallbacks.rb:1204 -#: library/packages/src/modules/PackageCallbacks.rb:1314 +#. error message - a label followed by a richtext with details +#. error message - a label followed by a richtext with details +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1077 +#: library/packages/src/modules/PackageCallbacks.rb:1204 +#: library/packages/src/modules/PackageCallbacks.rb:1314 msgid "Unable to retrieve the remote repository description." msgstr "원격 리포지토리 설명을 검색할 수 없습니다." -#. error message - a label followed by a richtext with details -#. error message - a label followed by a richtext with details -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1080 -#: library/packages/src/modules/PackageCallbacks.rb:1207 -#: library/packages/src/modules/PackageCallbacks.rb:1317 +#. error message - a label followed by a richtext with details +#. error message - a label followed by a richtext with details +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1080 +#: library/packages/src/modules/PackageCallbacks.rb:1207 +#: library/packages/src/modules/PackageCallbacks.rb:1317 msgid "An error occurred while retrieving the new metadata." msgstr "새 메타 데이터를 검색하는 중에 오류가 발생했습니다." -#. error message - a label followed by a richtext with details -#. error message - a label followed by a richtext with details -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1083 -#: library/packages/src/modules/PackageCallbacks.rb:1210 -#: library/packages/src/modules/PackageCallbacks.rb:1320 +#. error message - a label followed by a richtext with details +#. error message - a label followed by a richtext with details +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1083 +#: library/packages/src/modules/PackageCallbacks.rb:1210 +#: library/packages/src/modules/PackageCallbacks.rb:1320 msgid "The repository is not valid." msgstr "리포지토리가 잘못되었습니다." -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1086 +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1086 msgid "The repository metadata is invalid." msgstr "리포지토리 메타 데이터가 잘못되었습니다." -#. command line mode - ask user whether the repository refreshment should be retried -#. command line mode - ask user whether the repository refreshment should be retried -#. command line mode - ask user whether the repository refreshment should be retried -#. command line mode - ask user whether target initializatin can be restarted -#: library/packages/src/modules/PackageCallbacks.rb:1099 -#: library/packages/src/modules/PackageCallbacks.rb:1229 -#: library/packages/src/modules/PackageCallbacks.rb:1333 -#: library/packages/src/modules/PackageCallbacks.rb:2090 +#. command line mode - ask user whether the repository refreshment should be retried +#. command line mode - ask user whether the repository refreshment should be retried +#. command line mode - ask user whether the repository refreshment should be retried +#. command line mode - ask user whether target initializatin can be restarted +#: library/packages/src/modules/PackageCallbacks.rb:1099 +#: library/packages/src/modules/PackageCallbacks.rb:1229 +#: library/packages/src/modules/PackageCallbacks.rb:1333 +#: library/packages/src/modules/PackageCallbacks.rb:2090 msgid "Retry?" msgstr "다시 시도?" -#. popup label (%1 is repository URL) -#: library/packages/src/modules/PackageCallbacks.rb:1145 -#: library/packages/src/modules/PackageCallbacks.rb:1153 +#. popup label (%1 is repository URL) +#: library/packages/src/modules/PackageCallbacks.rb:1145 +#: library/packages/src/modules/PackageCallbacks.rb:1153 msgid "Probing Repository %1" msgstr "%1 리포지토리 탐색 중" -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1200 +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1200 msgid "Error occurred while probing the repository." msgstr "리포지토리를 탐색하는 중에 오류가 발생했습니다." -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1213 +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1213 msgid "Repository probing details." msgstr "리포지토리 탐색 세부 정보." -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1216 +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1216 msgid "Repository metadata is invalid." msgstr "리포지토리 메타 데이터가 잘못되었습니다." -#. error message - a label followed by a richtext with details -#: library/packages/src/modules/PackageCallbacks.rb:1310 +#. error message - a label followed by a richtext with details +#: library/packages/src/modules/PackageCallbacks.rb:1310 msgid "Repository %1" msgstr "리포지토리 %1" -#. at start of delta providal -#: library/packages/src/modules/PackageCallbacks.rb:1398 +#. at start of delta providal +#: library/packages/src/modules/PackageCallbacks.rb:1398 msgid "Downloading delta RPM package %1 (%2)..." msgstr "델타 RPM 패키지 %1(%2) 다운로드 중..." -#. popup heading -#: library/packages/src/modules/PackageCallbacks.rb:1406 +#. popup heading +#: library/packages/src/modules/PackageCallbacks.rb:1406 msgid "Downloading Delta RPM package" msgstr "델타 RPM 패키지 다운로드 중" -#. at start of delta application -#: library/packages/src/modules/PackageCallbacks.rb:1419 +#. at start of delta application +#: library/packages/src/modules/PackageCallbacks.rb:1419 msgid "Applying delta RPM package %1..." msgstr "델타 RPM 패키지 %1 적용 중..." -#. popup heading -#: library/packages/src/modules/PackageCallbacks.rb:1426 +#. popup heading +#: library/packages/src/modules/PackageCallbacks.rb:1426 msgid "Applying delta RPM package" msgstr "델타 RPM 패키지 적용 중" -#. popup heading -#: library/packages/src/modules/PackageCallbacks.rb:1428 -#: library/packages/src/modules/PackageCallbacks.rb:3065 +#. popup heading +#: library/packages/src/modules/PackageCallbacks.rb:1428 +#: library/packages/src/modules/PackageCallbacks.rb:3065 msgid "Package: " msgstr "패키지:" -#. close popup -#: library/packages/src/modules/PackageCallbacks.rb:1494 +#. close popup +#: library/packages/src/modules/PackageCallbacks.rb:1494 msgid "Starting script %1 (patch %2)..." msgstr "%1 스크립트(패치 %2) 시작하는 중..." -#. popup heading -#: library/packages/src/modules/PackageCallbacks.rb:1503 +#. popup heading +#: library/packages/src/modules/PackageCallbacks.rb:1503 msgid "Running Script" msgstr "스크립트 실행 중" -#. label, patch name follows -#: library/packages/src/modules/PackageCallbacks.rb:1508 +#. label, patch name follows +#: library/packages/src/modules/PackageCallbacks.rb:1508 msgid "Patch: " msgstr "패치:" -#. label, script name follows -#: library/packages/src/modules/PackageCallbacks.rb:1517 +#. label, script name follows +#: library/packages/src/modules/PackageCallbacks.rb:1517 msgid "Script: " msgstr "스크립트:" -#. label -#: library/packages/src/modules/PackageCallbacks.rb:1523 +#. label +#: library/packages/src/modules/PackageCallbacks.rb:1523 msgid "Output of the Script" msgstr "스크립트 출력" -#. label, %1 is patch name with version and architecture -#: library/packages/src/modules/PackageCallbacks.rb:1611 +#. label, %1 is patch name with version and architecture +#: library/packages/src/modules/PackageCallbacks.rb:1611 msgid "" "Patch: %1\n" "\n" @@ -3519,8 +3438,8 @@ "패치: %1\n" "\n" -#. a popup question with "Continue", "Skip" and "Abort" buttons -#: library/packages/src/modules/PackageCallbacks.rb:1628 +#. a popup question with "Continue", "Skip" and "Abort" buttons +#: library/packages/src/modules/PackageCallbacks.rb:1628 msgid "" "The repositories are being refreshed.\n" "Continue with refreshing?\n" @@ -3534,39 +3453,37 @@ "참고: 새로 고침을 건너뛸 경우 패키지가\n" "없거나 오래되었을 수 있습니다." -#. push button label -#: library/packages/src/modules/PackageCallbacks.rb:1643 +#. push button label +#: library/packages/src/modules/PackageCallbacks.rb:1643 msgid "&Skip Refresh" msgstr "새로 고침 건너뛰기(&S)" -#. heading of popup -#: library/packages/src/modules/PackageCallbacks.rb:1677 +#. heading of popup +#: library/packages/src/modules/PackageCallbacks.rb:1677 msgid "Downloading" msgstr "다운로드 중" -#. message in a progress popup -#. progress bar label, %1 is URL with optional download rate -#: library/packages/src/modules/PackageCallbacks.rb:1724 -#: library/packages/src/modules/PackageCallbacks.rb:1770 +#. message in a progress popup +#. progress bar label, %1 is URL with optional download rate +#: library/packages/src/modules/PackageCallbacks.rb:1724 +#: library/packages/src/modules/PackageCallbacks.rb:1770 msgid "Downloading: %1" msgstr "다운로드 중: %1" -#. heading of popup -#. heading of popup -#: library/packages/src/modules/PackageCallbacks.rb:1872 -#: library/packages/src/modules/PackageCallbacks.rb:1938 +#. heading of popup +#. heading of popup +#: library/packages/src/modules/PackageCallbacks.rb:1872 +#: library/packages/src/modules/PackageCallbacks.rb:1938 msgid "Checking Package Database" msgstr "패키지 데이터베이스 확인 중" -#. message in a progress popup -#: library/packages/src/modules/PackageCallbacks.rb:1875 +#. message in a progress popup +#: library/packages/src/modules/PackageCallbacks.rb:1875 msgid "Rebuilding package database. This process can take some time." -msgstr "" -"패키지 데이터베이스를 다시 만들고 있습니다. 이 프로세스는 시간이 많이 걸릴 " -"수 있습니다." +msgstr "패키지 데이터베이스를 다시 만들고 있습니다. 이 프로세스는 시간이 많이 걸릴 수 있습니다." -#. error message, %1 is the cause for the error -#: library/packages/src/modules/PackageCallbacks.rb:1908 +#. error message, %1 is the cause for the error +#: library/packages/src/modules/PackageCallbacks.rb:1908 msgid "" "Rebuilding of package database failed:\n" "%1" @@ -3574,19 +3491,17 @@ "패키지 데이터베이스를 다시 만들지 못했습니다.\n" "%1" -#. message in a progress popup -#: library/packages/src/modules/PackageCallbacks.rb:1941 +#. message in a progress popup +#: library/packages/src/modules/PackageCallbacks.rb:1941 msgid "Converting package database. This process can take some time." -msgstr "" -"패키지 데이터베이스를 변환하고 있습니다. 이 프로세스는 시간이 걸릴 수 있습니" -"다." +msgstr "패키지 데이터베이스를 변환하고 있습니다. 이 프로세스는 시간이 걸릴 수 있습니다." -#: library/packages/src/modules/PackageCallbacks.rb:1954 +#: library/packages/src/modules/PackageCallbacks.rb:1954 msgid "Status" msgstr "상태" -#. error message, %1 is the cause for the error -#: library/packages/src/modules/PackageCallbacks.rb:1978 +#. error message, %1 is the cause for the error +#: library/packages/src/modules/PackageCallbacks.rb:1978 msgid "" "Conversion of package database failed:\n" "%1" @@ -3594,44 +3509,44 @@ "패키지 데이터베이스를 변환하지 못했습니다.\n" "%1" -#. progress message (command line mode) -#: library/packages/src/modules/PackageCallbacks.rb:2014 +#. progress message (command line mode) +#: library/packages/src/modules/PackageCallbacks.rb:2014 msgid "Reading RPM database..." msgstr "RPM 데이터베이스를 읽는 중..." -#. popup heading -#: library/packages/src/modules/PackageCallbacks.rb:2023 +#. popup heading +#: library/packages/src/modules/PackageCallbacks.rb:2023 msgid "Reading Installed Packages" msgstr "설치된 패키지를 읽는 중" -#. progress bar label -#. TODO: allow Abort -#. , -#. `VBox( -#. `Label(""), -#. `PushButton(`id(`abort), Label::AbortButton()) -#. ) -#: library/packages/src/modules/PackageCallbacks.rb:2029 -#: library/packages/src/modules/PackageCallbacks.rb:2045 +#. progress bar label +#. TODO: allow Abort +#. , +#. `VBox( +#. `Label(""), +#. `PushButton(`id(`abort), Label::AbortButton()) +#. ) +#: library/packages/src/modules/PackageCallbacks.rb:2029 +#: library/packages/src/modules/PackageCallbacks.rb:2045 msgid "Scanning RPM database..." msgstr "RPM 데이터베이스 스캔 중..." -#. error message, could not read RPM database -#: library/packages/src/modules/PackageCallbacks.rb:2079 +#. error message, could not read RPM database +#: library/packages/src/modules/PackageCallbacks.rb:2079 msgid "Initialization of the target failed." msgstr "대상 초기화에 실패했습니다." -#. status message (command line mode) -#: library/packages/src/modules/PackageCallbacks.rb:2171 +#. status message (command line mode) +#: library/packages/src/modules/PackageCallbacks.rb:2171 msgid "RPM database read" msgstr "RPM 데이터베이스 읽기" -#. heading in a popup window -#: library/packages/src/modules/PackageCallbacks.rb:2203 +#. heading in a popup window +#: library/packages/src/modules/PackageCallbacks.rb:2203 msgid "User Authentication" msgstr "사용자 인증" -#: library/packages/src/modules/PackageCallbacks.rb:2209 +#: library/packages/src/modules/PackageCallbacks.rb:2209 msgid "" "URL: %1\n" "\n" @@ -3641,26 +3556,26 @@ "\n" "%2" -#. textentry label -#: library/packages/src/modules/PackageCallbacks.rb:2218 +#. textentry label +#: library/packages/src/modules/PackageCallbacks.rb:2218 msgid "&User Name" msgstr "사용자 이름(&U)" -#. check box -#: library/packages/src/modules/PackageCallbacks.rb:3000 +#. check box +#: library/packages/src/modules/PackageCallbacks.rb:3000 msgid "Show &details" msgstr "자세히 보기(&D)" -#: library/packages/src/modules/PackageCallbacks.rb:3066 +#: library/packages/src/modules/PackageCallbacks.rb:3066 msgid "Size: " msgstr "크기:" -#: library/packages/src/modules/PackageCallbacks.rb:3089 +#: library/packages/src/modules/PackageCallbacks.rb:3089 msgid "Remaining time to automatic retry: %1" msgstr "자동 재시도까지 남은 시간: %1" -#. ask to send quit signal to PackageKit -#: library/packages/src/modules/PackageLock.rb:58 +#. ask to send quit signal to PackageKit +#: library/packages/src/modules/PackageLock.rb:58 msgid "" "PackageKit is still running (probably busy).\n" "Ask PackageKit to quit again?" @@ -3668,7 +3583,7 @@ "PackageKit가 여전히 실행되고 있습니다(사용 중).\n" "PackageKit 종료를 다시 요청하시겠습니까?" -#: library/packages/src/modules/PackageLock.rb:62 +#: library/packages/src/modules/PackageLock.rb:62 msgid "" "PackageKit is blocking software management.\n" "This happens when the updater applet or another software management\n" @@ -3682,17 +3597,17 @@ "\n" "PackageKit 종료를 요청하시겠습니까?" -#. TRANSLATORS: a popup headline -#. TRANSLATORS: a popup headline -#. TRANSLATORS: a popup headline -#: library/packages/src/modules/PackageLock.rb:108 -#: library/packages/src/modules/PackageLock.rb:159 -#: library/packages/src/modules/PackageLock.rb:183 +#. TRANSLATORS: a popup headline +#. TRANSLATORS: a popup headline +#. TRANSLATORS: a popup headline +#: library/packages/src/modules/PackageLock.rb:108 +#: library/packages/src/modules/PackageLock.rb:159 +#: library/packages/src/modules/PackageLock.rb:183 msgid "Accessing the Software Management Failed" msgstr "소프트웨어 관리 액세스에 실패" -#. TRANSLATORS: an error message with question -#: library/packages/src/modules/PackageLock.rb:112 +#. TRANSLATORS: an error message with question +#: library/packages/src/modules/PackageLock.rb:112 msgid "" "Would you like to continue without having access\n" "to the software management or retry to access it?\n" @@ -3700,8 +3615,8 @@ "소프트웨어 관리에 액세스하지 않고 계속하시겠습니까\n" "아니면 액세스를 재시도하시겠습니까?\n" -#. TRANSLATORS: an error message with question -#: library/packages/src/modules/PackageLock.rb:163 +#. TRANSLATORS: an error message with question +#: library/packages/src/modules/PackageLock.rb:163 msgid "" "Would you like to retry accessing the software manager,\n" "continue without having access to the software management,\n" @@ -3711,20 +3626,20 @@ "계속을 선택하면 소프트웨어 관리 액세스 없이 진행합니다.\n" "또는 중단하시겠습니까?\n" -#. TRANSLATORS: an error message with question -#: library/packages/src/modules/PackageLock.rb:187 +#. TRANSLATORS: an error message with question +#: library/packages/src/modules/PackageLock.rb:187 msgid "Would you like to abort or try again?\n" msgstr "중단하거나 다시 시도하시겠습니까?\n" -#. print the question -#. popup heading, with rich text widget and Yes/No buttons -#: library/packages/src/modules/PackageSystem.rb:188 -#: library/packages/src/modules/PackageSystem.rb:194 +#. print the question +#. popup heading, with rich text widget and Yes/No buttons +#: library/packages/src/modules/PackageSystem.rb:188 +#: library/packages/src/modules/PackageSystem.rb:194 msgid "Do you accept this license agreement?" msgstr "이 사용권 계약을 수용하십니까?" -#. error message, after pressing [OK] the package manager is displayed -#: library/packages/src/modules/PackageSystem.rb:224 +#. error message, after pressing [OK] the package manager is displayed +#: library/packages/src/modules/PackageSystem.rb:224 msgid "" "There are unresolved dependencies which need\n" "to be solved manually in the software manager." @@ -3732,13 +3647,13 @@ "소프트웨어 관리자에서 수동으로 해결해야 하는\n" "해결되지 않은 종속성이 있습니다." -#. error report -#: library/packages/src/modules/PackageSystem.rb:418 +#. error report +#: library/packages/src/modules/PackageSystem.rb:418 msgid "Installing required packages failed." msgstr "요구된 패키지의 설치가 실패하였습니다." -#. continue/cancel popup -#: library/packages/src/modules/PackageSystem.rb:422 +#. continue/cancel popup +#: library/packages/src/modules/PackageSystem.rb:422 msgid "" "Installing required packages failed. If you continue\n" "without installing required packages,\n" @@ -3748,13 +3663,13 @@ "설치하지 않은 채 계속 진행하면\n" " YaST가 제대로 작동하지 않을 수 있습니다.\n" -#. error report -#: library/packages/src/modules/PackageSystem.rb:432 +#. error report +#: library/packages/src/modules/PackageSystem.rb:432 msgid "Cannot continue without installing required packages." msgstr "필요한 패키지를 설치하지 않으면 계속 진행할 수 없습니다." -#. continue/cancel popup -#: library/packages/src/modules/PackageSystem.rb:437 +#. continue/cancel popup +#: library/packages/src/modules/PackageSystem.rb:437 msgid "" "If you continue without installing required \n" "packages, YaST may not work properly.\n" @@ -3762,29 +3677,28 @@ "필요한 패키지를 설치하지 않은 채 계속 진행하면\n" "YaST가 제대로 작동하지 않습니다.\n" -#. dialog heading, %1 is package name -#: library/packages/src/modules/PackagesUI.rb:156 +#. dialog heading, %1 is package name +#: library/packages/src/modules/PackagesUI.rb:156 msgid "Confirm Package License: %1" msgstr "패키지 라이센스 확인: %1" -#. push button -#: library/packages/src/modules/PackagesUI.rb:163 +#. push button +#: library/packages/src/modules/PackagesUI.rb:163 msgid "I &Agree" msgstr "동의함(&A)" -#. push button -#: library/packages/src/modules/PackagesUI.rb:165 +#. push button +#: library/packages/src/modules/PackagesUI.rb:165 msgid "I &Disagree" msgstr "동의 안 함(&D)" -#. help text -#: library/packages/src/modules/PackagesUI.rb:177 +#. help text +#: library/packages/src/modules/PackagesUI.rb:177 msgid "" "<p><b><big>License Confirmation</big></b><br>\n" "The package in the headline of the dialog requires an explicit confirmation\n" "of acceptance of its license.\n" -"If you reject the license of the package, the package will not be " -"installed.\n" +"If you reject the license of the package, the package will not be installed.\n" "<br>\n" "To accept the license of the package, click <b>I Agree</b>.\n" "To reject the license of the package, click <b>I Disagree</b></p>." @@ -3797,26 +3711,22 @@ "패키지 라이센스에 동의하려면 <b>동의함</b>을 클릭하십시오.\n" "패키지 라이센스에 동의하지 않으려면 <b>동의 안 함</b>을 클릭하십시오.</p>" -#. Help text for software patterns / selections dialog -#: library/packages/src/modules/PackagesUI.rb:347 +#. Help text for software patterns / selections dialog +#: library/packages/src/modules/PackagesUI.rb:347 msgid "" "<p>\n" -"\t\t This dialog allows you to define this system's tasks and what software " -"to install.\n" -"\t\t Available tasks and software for this system are shown by category in " -"the left\n" +"\t\t This dialog allows you to define this system's tasks and what software to install.\n" +"\t\t Available tasks and software for this system are shown by category in the left\n" "\t\t column. To view a description for an item, select it in the list.\n" "\t\t </p>" msgstr "" "<p>\n" -"\t\t 이 대화 상자에서는 시스템의 작업 및 설치할 소프트웨어를 정의할 수 있습니" -"다.\n" +"\t\t 이 대화 상자에서는 시스템의 작업 및 설치할 소프트웨어를 정의할 수 있습니다.\n" "\t\t 이 시스템에 사용할 수 있는 작업 및 소프트웨어는 왼쪽 열에 범주별로\n" -"\t\t 표시됩니다. 항목에 대한 설명을 보려면 목록에서 해당 항목을 선택하십시" -"오.\n" +"\t\t 표시됩니다. 항목에 대한 설명을 보려면 목록에서 해당 항목을 선택하십시오.\n" "\t\t </p>" -#: library/packages/src/modules/PackagesUI.rb:354 +#: library/packages/src/modules/PackagesUI.rb:354 msgid "" "<p>\n" "\t\t Change the status of an item by clicking its status icon\n" @@ -3830,7 +3740,7 @@ "\t\t 상황별 메뉴를 사용하여 모든 항목의 상태를 변경할 수도 있습니다.\n" "\t\t </p>" -#: library/packages/src/modules/PackagesUI.rb:361 +#: library/packages/src/modules/PackagesUI.rb:361 msgid "" "<p>\n" "\t\t <b>Details</b> opens the detailed software package selection\n" @@ -3842,11 +3752,10 @@ "\t\t 선택할 수 있는 세부적인 소프트웨어 패키지 선택 창이 열립니다.\n" "\t\t </p>" -#: library/packages/src/modules/PackagesUI.rb:367 +#: library/packages/src/modules/PackagesUI.rb:367 msgid "" "<p>\n" -"\t\t The disk usage display in the lower right corner shows the remaining " -"disk space\n" +"\t\t The disk usage display in the lower right corner shows the remaining disk space\n" "\t\t after all requested changes will have been performed.\n" "\t\t Hard disk partitions that are full or nearly full can degrade\n" "\t\t system performance and in some cases even cause serious problems.\n" @@ -3854,139 +3763,133 @@ "\t\t </p>" msgstr "" "<p>\n" -"\t\t 오른쪽 맨 아래의 디스크 사용 표시는 요청한 변경 작업을 모두 수행한 후" -"에\n" +"\t\t 오른쪽 맨 아래의 디스크 사용 표시는 요청한 변경 작업을 모두 수행한 후에\n" "\t\t 남아 있는 디스크 공간을 보여줍니다.\n" "\t\t하드 디스크 파티션이 가득 차거나 거의 차면 시스템 성능이 저하되고\n" "\t\t 경우에 따라 심각한 문제를 일으킬 수 있습니다.\n" -"\t\t 시스템이 올바로 실행하려면 사용 가능한 일부 디스크 공간이 있어야 합니" -"다.\n" +"\t\t 시스템이 올바로 실행하려면 사용 가능한 일부 디스크 공간이 있어야 합니다.\n" "\t\t </p>" -#. Dialog title -#. Hint for German translation: "Softwareauswahl und Einsatzzweck des Systems" -#: library/packages/src/modules/PackagesUI.rb:388 +#. Dialog title +#. Hint for German translation: "Softwareauswahl und Einsatzzweck des Systems" +#: library/packages/src/modules/PackagesUI.rb:388 msgid "Software Selection and System Tasks" msgstr "소프트웨어 선택 및 시스템 작업" -#. don't get all the way out - the user might just have -#. been scared of the gory details. -#: library/packages/src/modules/PackagesUI.rb:429 +#. don't get all the way out - the user might just have +#. been scared of the gory details. +#: library/packages/src/modules/PackagesUI.rb:429 msgid "(more)" msgstr "(기타)" -#: library/packages/src/modules/PackagesUI.rb:445 +#: library/packages/src/modules/PackagesUI.rb:445 msgid "Installation Successfully Finished" msgstr "설치가 성공적으로 완료" -#: library/packages/src/modules/PackagesUI.rb:447 +#: library/packages/src/modules/PackagesUI.rb:447 msgid "Package Installation Failed" msgstr "패키지 설치에 실패" -#: library/packages/src/modules/PackagesUI.rb:459 +#: library/packages/src/modules/PackagesUI.rb:459 msgid "Error Message: %1" msgstr "오류 메시지: %1" -#: library/packages/src/modules/PackagesUI.rb:476 +#: library/packages/src/modules/PackagesUI.rb:476 msgid "Failed Packages: %1" msgstr "실패한 패키지: %1" -#: library/packages/src/modules/PackagesUI.rb:495 +#: library/packages/src/modules/PackagesUI.rb:495 msgid "Installed Packages: %1" msgstr "설치된 패키지: %1" -#: library/packages/src/modules/PackagesUI.rb:514 +#: library/packages/src/modules/PackagesUI.rb:514 msgid "Updated Packages: %1" msgstr "업데이트된 패키지: %1" -#: library/packages/src/modules/PackagesUI.rb:533 +#: library/packages/src/modules/PackagesUI.rb:533 msgid "Removed Packages: %1" msgstr "제거된 패키지: %1" -#: library/packages/src/modules/PackagesUI.rb:555 +#: library/packages/src/modules/PackagesUI.rb:555 msgid "Not Installed Packages: %1" msgstr "설치되지 않은 패키지: %1" -#. Table headings for CD statistics during installation -#: library/packages/src/modules/PackagesUI.rb:571 -#: library/packages/src/modules/SlideShow.rb:534 +#. Table headings for CD statistics during installation +#: library/packages/src/modules/PackagesUI.rb:571 +#: library/packages/src/modules/SlideShow.rb:534 msgid "Packages" msgstr "패키지" -#. reset the items list -#: library/packages/src/modules/PackagesUI.rb:582 +#. reset the items list +#: library/packages/src/modules/PackagesUI.rb:582 msgid "Elapsed Time: %1" msgstr "진행 시간: %1" -#: library/packages/src/modules/PackagesUI.rb:592 +#: library/packages/src/modules/PackagesUI.rb:592 msgid "Total Installed Size: %1" msgstr "전체 설치 크기: %1" -#: library/packages/src/modules/PackagesUI.rb:602 +#: library/packages/src/modules/PackagesUI.rb:602 msgid "Total Downloaded Size: %1" msgstr "전체 다운로드 크기: %1" -#: library/packages/src/modules/PackagesUI.rb:611 +#: library/packages/src/modules/PackagesUI.rb:611 msgid "Statistics" msgstr "통계" -#. display installation log -#: library/packages/src/modules/PackagesUI.rb:624 -#: library/packages/src/modules/PackagesUI.rb:713 +#. display installation log +#: library/packages/src/modules/PackagesUI.rb:624 +#: library/packages/src/modules/PackagesUI.rb:713 msgid "Installation log" msgstr "설치 로그" -#: library/packages/src/modules/PackagesUI.rb:631 +#: library/packages/src/modules/PackagesUI.rb:631 msgid "Details" msgstr "자세히" -#. open a new wizard dialog if needed -#: library/packages/src/modules/PackagesUI.rb:679 +#. open a new wizard dialog if needed +#: library/packages/src/modules/PackagesUI.rb:679 msgid "After Installing Packages" msgstr "패키지 설치 후" -#: library/packages/src/modules/PackagesUI.rb:681 +#: library/packages/src/modules/PackagesUI.rb:681 msgid "Show This Report" msgstr "이 보고서 표시" -#: library/packages/src/modules/PackagesUI.rb:682 +#: library/packages/src/modules/PackagesUI.rb:682 msgid "Finish" msgstr "완료" -#: library/packages/src/modules/PackagesUI.rb:683 +#: library/packages/src/modules/PackagesUI.rb:683 msgid "Continue in the Software Manager" msgstr "소프트웨어 관리자에서 계속" -#: library/packages/src/modules/PackagesUI.rb:688 -msgid "" -"<P><BIG><B>Installation Report</B></BIG><BR>Here is a summary of installed " -"or removed packages.</P>" -msgstr "" -"<P><BIG><B>설치 보고서</B></BIG><BR>여기에는 설치 또는 제거된 패키지 요약이 " -"있습니다.</P>" +#: library/packages/src/modules/PackagesUI.rb:688 +msgid "<P><BIG><B>Installation Report</B></BIG><BR>Here is a summary of installed or removed packages.</P>" +msgstr "<P><BIG><B>설치 보고서</B></BIG><BR>여기에는 설치 또는 제거된 패키지 요약이 있습니다.</P>" -#: library/packages/src/modules/PackagesUI.rb:696 +#: library/packages/src/modules/PackagesUI.rb:696 msgid "Installation Report" msgstr "설치 보고서" -#: library/packages/src/modules/PackagesUI.rb:718 +#: library/packages/src/modules/PackagesUI.rb:718 msgid "Installed Packages" msgstr "설치된 패키지" -#: library/packages/src/modules/PackagesUI.rb:723 +#: library/packages/src/modules/PackagesUI.rb:723 msgid "Updated Packages" msgstr "업데이트된 패키지" -#: library/packages/src/modules/PackagesUI.rb:728 +#: library/packages/src/modules/PackagesUI.rb:728 msgid "Removed Packages" msgstr "제거된 패키지" -#: library/packages/src/modules/PackagesUI.rb:733 +#: library/packages/src/modules/PackagesUI.rb:733 msgid "Remaining Packages" msgstr "남은 패키지" -#. disabling installation report dialog, inform the user how to enable it back -#: library/packages/src/modules/PackagesUI.rb:754 +#. disabling installation report dialog, inform the user how to enable it back +#: library/packages/src/modules/PackagesUI.rb:754 msgid "" "If you want to show this report dialog again edit\n" "\n" @@ -4000,10 +3903,10 @@ "\n" "값을 편집하십시오." -#. popup question, %1 stands for the package name -#. %2 is a repository name -#. %3 is URL of the repository -#: library/packages/src/modules/SignatureCheckDialogs.rb:456 +#. popup question, %1 stands for the package name +#. %2 is a repository name +#. %3 is URL of the repository +#: library/packages/src/modules/SignatureCheckDialogs.rb:456 msgid "" "The package %1 from repository %2\n" "%3\n" @@ -4021,10 +3924,10 @@ "\n" "패키지를 설치하시겠습니까?" -#. popup question, %1 stands for the filename -#. %2 is a repository name -#. %3 is URL of the repository -#: library/packages/src/modules/SignatureCheckDialogs.rb:469 +#. popup question, %1 stands for the filename +#. %2 is a repository name +#. %3 is URL of the repository +#: library/packages/src/modules/SignatureCheckDialogs.rb:469 msgid "" "The file %1 from repository %2\n" "%3\n" @@ -4042,17 +3945,17 @@ "\n" "사용하시겠습니까?\n" -#. popup heading -#: library/packages/src/modules/SignatureCheckDialogs.rb:493 +#. popup heading +#: library/packages/src/modules/SignatureCheckDialogs.rb:493 msgid "Unsigned Package" msgstr "서명되지 않은 패키지" -#: library/packages/src/modules/SignatureCheckDialogs.rb:495 +#: library/packages/src/modules/SignatureCheckDialogs.rb:495 msgid "Unsigned File" msgstr "서명되지 않은 파일" -#. popup question, %1 stands for the package name -#: library/packages/src/modules/SignatureCheckDialogs.rb:544 +#. popup question, %1 stands for the package name +#: library/packages/src/modules/SignatureCheckDialogs.rb:544 msgid "" "No checksum for package %1 was found in the repository.\n" "While the package is part of the signed repository, it is not contained \n" @@ -4068,82 +3971,80 @@ "\n" "설치하시겠습니까?\n" -#. popup question, %1 stands for the filename -#: library/packages/src/modules/SignatureCheckDialogs.rb:554 +#. popup question, %1 stands for the filename +#: library/packages/src/modules/SignatureCheckDialogs.rb:554 msgid "" "No checksum for file %1 was found in the repository.\n" "This means that the file is part of the signed repository,\n" -"but the list of checksums in this repository does not mention this file. " -"Using the file\n" +"but the list of checksums in this repository does not mention this file. Using the file\n" "may put the integrity of your system at risk.\n" "\n" "Use it anyway?" msgstr "" "리포지토리에서 %1 파일에 대한 체크섬을 찾을 수 없습니다.\n" "패키지가 서명된 리포지토리의 일부이지만\n" -"이 리포지토리의 체크섬 목록에 이 파일이 언급되어 있지 않습니다. 파일을 사용하" -"면\n" +"이 리포지토리의 체크섬 목록에 이 파일이 언급되어 있지 않습니다. 파일을 사용하면\n" "시스템의 무결성에 문제가 발생할 수 있습니다.\n" "\n" "사용하시겠습니까?" -#. popup heading -#: library/packages/src/modules/SignatureCheckDialogs.rb:572 +#. popup heading +#: library/packages/src/modules/SignatureCheckDialogs.rb:572 msgid "No Checksum Found" msgstr "체크섬을 찾을 수 없습니다." -#. Part of the GnuPG key description in popup, %1 is a GnuPG key ID -#. Part of the GnuPG key description in popup, %1 is a GnuPG key ID -#: library/packages/src/modules/SignatureCheckDialogs.rb:615 -#: library/packages/src/modules/SignatureCheckDialogs.rb:826 +#. Part of the GnuPG key description in popup, %1 is a GnuPG key ID +#. Part of the GnuPG key description in popup, %1 is a GnuPG key ID +#: library/packages/src/modules/SignatureCheckDialogs.rb:615 +#: library/packages/src/modules/SignatureCheckDialogs.rb:826 msgid "ID: %1" msgstr "ID: %1" -#. Part of the GnuPG key description in popup, %1 is a GnuPG key fingerprint -#: library/packages/src/modules/SignatureCheckDialogs.rb:624 +#. Part of the GnuPG key description in popup, %1 is a GnuPG key fingerprint +#: library/packages/src/modules/SignatureCheckDialogs.rb:624 msgid "Fingerprint: %1" msgstr "지문: %1" -#. Part of the GnuPG key description in popup, %1 is a GnuPG key name -#: library/packages/src/modules/SignatureCheckDialogs.rb:630 +#. Part of the GnuPG key description in popup, %1 is a GnuPG key name +#: library/packages/src/modules/SignatureCheckDialogs.rb:630 msgid "Name: %1" msgstr "이름: %1" -#: library/packages/src/modules/SignatureCheckDialogs.rb:636 +#: library/packages/src/modules/SignatureCheckDialogs.rb:636 msgid "Created: %1" msgstr "생성일: %1" -#: library/packages/src/modules/SignatureCheckDialogs.rb:648 +#: library/packages/src/modules/SignatureCheckDialogs.rb:648 msgid "Expires: %1" msgstr "만료일: %1" -#. GPG key property -#: library/packages/src/modules/SignatureCheckDialogs.rb:664 +#. GPG key property +#: library/packages/src/modules/SignatureCheckDialogs.rb:664 msgid "ID: " msgstr "ID: " -#. GPG key property -#: library/packages/src/modules/SignatureCheckDialogs.rb:670 +#. GPG key property +#: library/packages/src/modules/SignatureCheckDialogs.rb:670 msgid "Name: " msgstr "이름:" -#. GPG key property -#: library/packages/src/modules/SignatureCheckDialogs.rb:683 +#. GPG key property +#: library/packages/src/modules/SignatureCheckDialogs.rb:683 msgid "Fingerprint: " msgstr "지문:" -#. GPG key property -#: library/packages/src/modules/SignatureCheckDialogs.rb:694 +#. GPG key property +#: library/packages/src/modules/SignatureCheckDialogs.rb:694 msgid "Created: " msgstr "생성:" -#. GPG key property -#: library/packages/src/modules/SignatureCheckDialogs.rb:705 +#. GPG key property +#: library/packages/src/modules/SignatureCheckDialogs.rb:705 msgid "Expires: " msgstr "만료:" -#. popup question, %1 stands for the package name, %2 for the complete description of the GnuPG key (multiline) -#: library/packages/src/modules/SignatureCheckDialogs.rb:727 +#. popup question, %1 stands for the package name, %2 for the complete description of the GnuPG key (multiline) +#: library/packages/src/modules/SignatureCheckDialogs.rb:727 msgid "" "Package %1 from repository %2\n" "%3\n" @@ -4157,8 +4058,7 @@ msgstr "" "%2\n" "%3\n" -"리포지토리의 %1 패키지가 다음 GnuPG 키로 서명되었지만 무결성 확인에 실패했습" -"니다. %4\n" +"리포지토리의 %1 패키지가 다음 GnuPG 키로 서명되었지만 무결성 확인에 실패했습니다. %4\n" "\n" "리포지토리 생성자가 서명한 후 패키지가\n" "실수로 또는 공격자에 의해 변경되었습니다. 설치하면 시스템의 무결성과 보안에\n" @@ -4166,8 +4066,8 @@ "\n" "설치하시겠습니까?\n" -#. popup question, %1 stands for the filename, %2 for the complete description of the GnuPG key (multiline) -#: library/packages/src/modules/SignatureCheckDialogs.rb:740 +#. popup question, %1 stands for the filename, %2 for the complete description of the GnuPG key (multiline) +#: library/packages/src/modules/SignatureCheckDialogs.rb:740 msgid "" "File %1 from repository %2\n" "%3\n" @@ -4181,8 +4081,7 @@ msgstr "" "%2\n" "%3\n" -"리포지토리의 %1 파일이 다음 GnuPG 키로 서명되었지만 무결성 확인에 실패했습니" -"다. %4\n" +"리포지토리의 %1 파일이 다음 GnuPG 키로 서명되었지만 무결성 확인에 실패했습니다. %4\n" "\n" "리포지토리 생성자가 서명한 후 파일이\n" "실수로 또는 공격자에 의해 변경되었습니다. 사용하면 시스템의 무결성과 보안에\n" @@ -4190,13 +4089,13 @@ "\n" "사용하시겠습니까?\n" -#. popup heading -#: library/packages/src/modules/SignatureCheckDialogs.rb:764 +#. popup heading +#: library/packages/src/modules/SignatureCheckDialogs.rb:764 msgid "Validation Check Failed" msgstr "유효성 확인 검사에 실패했습니다." -#. popup question, %1 stands for the package name, %2 for the complex multiline description of the GnuPG key -#: library/packages/src/modules/SignatureCheckDialogs.rb:794 +#. popup question, %1 stands for the package name, %2 for the complex multiline description of the GnuPG key +#: library/packages/src/modules/SignatureCheckDialogs.rb:794 msgid "" "The package %1 is digitally signed\n" "with the following unknown GnuPG key: %2.\n" @@ -4216,8 +4115,8 @@ "\n" "패키지를 설치하시겠습니까?" -#. popup question, %1 stands for the filename, %2 for the complex multiline description of the GnuPG key -#: library/packages/src/modules/SignatureCheckDialogs.rb:806 +#. popup question, %1 stands for the filename, %2 for the complex multiline description of the GnuPG key +#: library/packages/src/modules/SignatureCheckDialogs.rb:806 msgid "" "The file %1\n" "is digitally signed with the following unknown GnuPG key: %2.\n" @@ -4237,13 +4136,13 @@ "\n" "파일을 사용하시겠습니까?" -#. popup heading -#: library/packages/src/modules/SignatureCheckDialogs.rb:836 +#. popup heading +#: library/packages/src/modules/SignatureCheckDialogs.rb:836 msgid "Unknown GnuPG Key" msgstr "알 수 없는 GnuPG 키" -#. popup question, %1 stands for the package name, %2 for the key ID, %3 for the key name -#: library/packages/src/modules/SignatureCheckDialogs.rb:887 +#. popup question, %1 stands for the package name, %2 for the key ID, %3 for the key name +#: library/packages/src/modules/SignatureCheckDialogs.rb:887 msgid "" "The package %1 is digitally signed\n" "with key '%2 (%3)'.\n" @@ -4265,8 +4164,8 @@ "시스템의 무결성에 문제가 발생할 수 있습니다.\n" "패키지를 건너뛰는 것이 가장 안전합니다.\n" -#. popup question, %1 stands for the filename, %2 for the key ID, %3 for the key name -#: library/packages/src/modules/SignatureCheckDialogs.rb:900 +#. popup question, %1 stands for the filename, %2 for the key ID, %3 for the key name +#: library/packages/src/modules/SignatureCheckDialogs.rb:900 msgid "" "The file %1 is digitally signed\n" "with key '%2 (%3)'.\n" @@ -4288,18 +4187,18 @@ "시스템의 무결성에 문제가 발생할 수 있습니다.\n" "파일을 건너뛰는 것이 가장 안전합니다.\n" -#. popup heading -#: library/packages/src/modules/SignatureCheckDialogs.rb:923 +#. popup heading +#: library/packages/src/modules/SignatureCheckDialogs.rb:923 msgid "Signed with Untrusted Public Key" msgstr "신뢰할 수 없는 공개 키로 서명됨" -#. push button -#: library/packages/src/modules/SignatureCheckDialogs.rb:932 +#. push button +#: library/packages/src/modules/SignatureCheckDialogs.rb:932 msgid "&Trust and Import the Key" msgstr "키 트러스트 및 임포트(&T)" -#. additional Richtext (HTML) warning text (kind of help), 1/2 -#: library/packages/src/modules/SignatureCheckDialogs.rb:966 +#. additional Richtext (HTML) warning text (kind of help), 1/2 +#: library/packages/src/modules/SignatureCheckDialogs.rb:966 msgid "" "<p>The owner of the key may distribute updates,\n" "packages, and package repositories that your system will trust and offer\n" @@ -4313,20 +4212,19 @@ "키링으로 키를 임포트하면 키 소유자가 시스템의 소프트웨어를\n" "어느 정도 제어할 수 있게 됩니다.</p>" -#. additional Richtext (HTML) warning text (kind of help), 2/2 -#: library/packages/src/modules/SignatureCheckDialogs.rb:974 +#. additional Richtext (HTML) warning text (kind of help), 2/2 +#: library/packages/src/modules/SignatureCheckDialogs.rb:974 msgid "" "<p>A warning dialog opens for every package that\n" "is not signed by a trusted (imported) key. If you do not trust the key,\n" -"the packages or repositories created by the owner of the key will not be " -"used.</p>" +"the packages or repositories created by the owner of the key will not be used.</p>" msgstr "" "<p>신뢰할 수 있는(임포트된) 키로 서명되지 않은 각 패키지에 대해\n" "경고 대화 상자가 열립니다. 키를 신뢰하지 않으면\n" "키 소유자가 생성한 패키지 또는 리포지토리가 사용되지 않습니다.</p>" -#. popup message - label, part 1, %1 stands for repository name, %2 for its URL -#: library/packages/src/modules/SignatureCheckDialogs.rb:984 +#. popup message - label, part 1, %1 stands for repository name, %2 for its URL +#: library/packages/src/modules/SignatureCheckDialogs.rb:984 msgid "" "The following GnuPG key has been found in repository\n" "%1\n" @@ -4336,8 +4234,8 @@ "%1\n" "리포지토리(%2)에 있습니다." -#. popup message - label, part 2 -#: library/packages/src/modules/SignatureCheckDialogs.rb:994 +#. popup message - label, part 2 +#: library/packages/src/modules/SignatureCheckDialogs.rb:994 msgid "" "You can choose to import it into your keyring of trusted\n" "public keys, meaning that you trust the owner of the key.\n" @@ -4349,24 +4247,24 @@ "임포트하기 전에 소유자를 신뢰할 수 있는지,\n" "키가 실제로 해당 소유자에게 속하는지 확인해야 합니다." -#. warning label - the key to import is expired -#: library/packages/src/modules/SignatureCheckDialogs.rb:1006 +#. warning label - the key to import is expired +#: library/packages/src/modules/SignatureCheckDialogs.rb:1006 msgid "WARNING: The key has expired!" msgstr "경고: 키가 만료되었습니다." -#. popup heading -#: library/packages/src/modules/SignatureCheckDialogs.rb:1034 +#. popup heading +#: library/packages/src/modules/SignatureCheckDialogs.rb:1034 msgid "Import Untrusted GnuPG Key" msgstr "신뢰할 수 없는 GnuPG 키 임포트" -#. push button -#: library/packages/src/modules/SignatureCheckDialogs.rb:1050 +#. push button +#: library/packages/src/modules/SignatureCheckDialogs.rb:1050 msgid "&Trust" msgstr "신뢰(&T)" -#. popup question, %1 stands for the filename, %2 is expected checksum -#. %3 is the current checksum (e.g. "803a8ff00d00c9075a1bd223a480bcf92d2481c1") -#: library/packages/src/modules/SignatureCheckDialogs.rb:1126 +#. popup question, %1 stands for the filename, %2 is expected checksum +#. %3 is the current checksum (e.g. "803a8ff00d00c9075a1bd223a480bcf92d2481c1") +#: library/packages/src/modules/SignatureCheckDialogs.rb:1126 msgid "" "The expected checksum of file %1\n" "is %2,\n" @@ -4388,21 +4286,20 @@ "\n" "사용하시겠습니까?\n" -#. dialog heading - displayed in a big bold font -#: library/packages/src/modules/SignatureCheckDialogs.rb:1143 +#. dialog heading - displayed in a big bold font +#: library/packages/src/modules/SignatureCheckDialogs.rb:1143 msgid "Wrong Digest" msgstr "잘못된 요약" -#. popup question, %1 stands for the filename, %2 is expected digest, %3 is the current digest -#: library/packages/src/modules/SignatureCheckDialogs.rb:1162 +#. popup question, %1 stands for the filename, %2 is expected digest, %3 is the current digest +#: library/packages/src/modules/SignatureCheckDialogs.rb:1162 msgid "" "The checksum of file %1\n" "is %2,\n" "but the expected checksum is not known.\n" "\n" "This means that the origin and integrity of the file\n" -"cannot be verified. Using the file puts the integrity of your system at " -"risk.\n" +"cannot be verified. Using the file puts the integrity of your system at risk.\n" "\n" "Use it anyway?\n" msgstr "" @@ -4415,93 +4312,86 @@ "\n" "사용하시겠습니까?\n" -#. dialog heading - displayed in a big bold font -#: library/packages/src/modules/SignatureCheckDialogs.rb:1176 +#. dialog heading - displayed in a big bold font +#: library/packages/src/modules/SignatureCheckDialogs.rb:1176 msgid "Unknown Digest" msgstr "알 수 없는 요약" -#. we need to remember the values for tab switching -#. these are the initial values -#. Return the description for the current stage. -#. @return [String] localized string description -#. translators: default global progress bar label -#: library/packages/src/modules/SlideShow.rb:152 -#: library/packages/src/modules/SlideShow.rb:153 -#: library/packages/src/modules/SlideShow.rb:324 -#: library/packages/src/modules/SlideShow.rb:345 +#. we need to remember the values for tab switching +#. these are the initial values +#. Return the description for the current stage. +#. @return [String] localized string description +#. translators: default global progress bar label +#: library/packages/src/modules/SlideShow.rb:152 +#: library/packages/src/modules/SlideShow.rb:153 +#: library/packages/src/modules/SlideShow.rb:324 +#: library/packages/src/modules/SlideShow.rb:345 msgid "Installing..." msgstr "설치 중..." -#. Table headings for CD statistics during installation -#: library/packages/src/modules/SlideShow.rb:530 +#. Table headings for CD statistics during installation +#: library/packages/src/modules/SlideShow.rb:530 msgid "Media" msgstr "미디어" -#. Table headings for CD statistics during installation - keep as short as possible! -#: library/packages/src/modules/SlideShow.rb:532 +#. Table headings for CD statistics during installation - keep as short as possible! +#: library/packages/src/modules/SlideShow.rb:532 msgid "Remaining" msgstr "남음" -#. Table headings for CD statistics during installation -#: library/packages/src/modules/SlideShow.rb:536 +#. Table headings for CD statistics during installation +#: library/packages/src/modules/SlideShow.rb:536 msgid "Time" msgstr "시간" -#. Construct widgets for the "details" page -#. -#. @return A term describing the widgets -#: library/packages/src/modules/SlideShow.rb:552 +#. Construct widgets for the "details" page +#. +#. @return A term describing the widgets +#: library/packages/src/modules/SlideShow.rb:552 msgid "Actions performed:" msgstr "수행된 작업:" -#. Help text while software packages are being installed (displayed only in rare cases) -#: library/packages/src/modules/SlideShow.rb:634 +#. Help text while software packages are being installed (displayed only in rare cases) +#: library/packages/src/modules/SlideShow.rb:634 msgid "<p>Packages are being installed.</p>" msgstr "<p>패키지를 설치 중입니다.</p>" -#: library/packages/src/modules/SlideShow.rb:635 -msgid "" -"<P><B>Aborting Installation</B> Package installation can be aborted using " -"the <B>Abort</B> button. However, the system then can be in an inconsistent " -"or unusable state or it may not boot if the basic system component is not " -"installed.</P>" -msgstr "" -"<P><B>설치 중단</B> 패키지 설치는 <B>중단</B> 버튼을 눌러 중단할 수 있습니" -"다. 하지만, 이로 인해 시스템이 불안정하거나, 기초 시스템 구성요소가 설치되지 " -"않아 부팅이 안 될 수도 있습니다.</P>" +#: library/packages/src/modules/SlideShow.rb:635 +msgid "<P><B>Aborting Installation</B> Package installation can be aborted using the <B>Abort</B> button. However, the system then can be in an inconsistent or unusable state or it may not boot if the basic system component is not installed.</P>" +msgstr "<P><B>설치 중단</B> 패키지 설치는 <B>중단</B> 버튼을 눌러 중단할 수 있습니다. 하지만, 이로 인해 시스템이 불안정하거나, 기초 시스템 구성요소가 설치되지 않아 부팅이 안 될 수도 있습니다.</P>" -#. Translators: Tab name, keep short, %s is product name, e.g. SLES -#: library/packages/src/modules/SlideShow.rb:653 +#. Translators: Tab name, keep short, %s is product name, e.g. SLES +#: library/packages/src/modules/SlideShow.rb:653 msgid "%s Release Notes" msgstr "%s 릴리스 정보" -#. tab -#: library/packages/src/modules/SlideShow.rb:665 +#. tab +#: library/packages/src/modules/SlideShow.rb:665 msgid "&Details" msgstr "자세히(&D)" -#. tab -#: library/packages/src/modules/SlideShow.rb:669 +#. tab +#: library/packages/src/modules/SlideShow.rb:669 msgid "Slide Sho&w" msgstr "슬라이드 쇼(&W)" -#. Dialog heading - software packages are being upgraded -#: library/packages/src/modules/SlideShow.rb:708 +#. Dialog heading - software packages are being upgraded +#: library/packages/src/modules/SlideShow.rb:708 msgid "Performing Upgrade" msgstr "업그레이드 수행" -#. Dialog heading - software packages are being installed -#: library/packages/src/modules/SlideShow.rb:711 +#. Dialog heading - software packages are being installed +#: library/packages/src/modules/SlideShow.rb:711 msgid "Performing Installation" msgstr "설치 수행" -#. Dialog heading while software packages are being installed -#: library/packages/src/modules/SlideShow.rb:746 +#. Dialog heading while software packages are being installed +#: library/packages/src/modules/SlideShow.rb:746 msgid "Package Installation" msgstr "패키지 설치" -#. popup yes-no -#: library/packages/src/modules/SlideShow.rb:818 +#. popup yes-no +#: library/packages/src/modules/SlideShow.rb:818 msgid "" "Do you really want\n" "to quit the installation?" @@ -4509,606 +4399,606 @@ "설치를\n" "종료하시겠습니까?" -#. Mode::update (), Stage::cont () -#: library/packages/src/modules/SlideShow.rb:830 +#. Mode::update (), Stage::cont () +#: library/packages/src/modules/SlideShow.rb:830 msgid "Aborted" msgstr "중단됨" -#. remove remaining ASCII control characters (ASCII 0-31 and 127 (DEL)) -#. except new line (LF = 0xa) and carriage return (CR = 0xd) -#: library/system/src/clients/view_anymsg.rb:196 +#. remove remaining ASCII control characters (ASCII 0-31 and 127 (DEL)) +#. except new line (LF = 0xa) and carriage return (CR = 0xd) +#: library/system/src/clients/view_anymsg.rb:196 msgid "File not found." msgstr "파일을 찾을 수 없습니다." -#. Fill the LogView with file content -#: library/system/src/clients/view_anymsg.rb:202 +#. Fill the LogView with file content +#: library/system/src/clients/view_anymsg.rb:202 msgid "System Log (%1)" msgstr "시스템 로그(%1)" -#. Class names collected -#: library/system/src/include/hwinfo/classnames.rb:45 -#: library/system/src/include/hwinfo/classnames.rb:46 -#: library/system/src/include/hwinfo/classnames.rb:182 +#. Class names collected +#: library/system/src/include/hwinfo/classnames.rb:45 +#: library/system/src/include/hwinfo/classnames.rb:46 +#: library/system/src/include/hwinfo/classnames.rb:182 msgid "Unclassified device" msgstr "구분되지 않은 장치" -#: library/system/src/include/hwinfo/classnames.rb:47 +#: library/system/src/include/hwinfo/classnames.rb:47 msgid "VGA compatible unclassified device" msgstr "VGA와 호환되는 구분되지 않은 장치" -#: library/system/src/include/hwinfo/classnames.rb:50 +#: library/system/src/include/hwinfo/classnames.rb:50 msgid "Mass storage controller" msgstr "대용량 저장 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:51 +#: library/system/src/include/hwinfo/classnames.rb:51 msgid "SCSI storage controller" msgstr "SCSI 저장 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:52 +#: library/system/src/include/hwinfo/classnames.rb:52 msgid "IDE interface" msgstr "IDE 인터페이스" -#: library/system/src/include/hwinfo/classnames.rb:53 +#: library/system/src/include/hwinfo/classnames.rb:53 msgid "Floppy disk controller" msgstr "플로피 디스크 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:54 +#: library/system/src/include/hwinfo/classnames.rb:54 msgid "IPI bus controller" msgstr "IPI 버스 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:55 +#: library/system/src/include/hwinfo/classnames.rb:55 msgid "RAID bus controller" msgstr "RAID 버스 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:56 +#: library/system/src/include/hwinfo/classnames.rb:56 msgid "Unknown mass storage controller" msgstr "알 수 없는 대용량 저장 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:59 -#: library/system/src/include/hwinfo/classnames.rb:65 +#: library/system/src/include/hwinfo/classnames.rb:59 +#: library/system/src/include/hwinfo/classnames.rb:65 msgid "Network controller" msgstr "네트워크 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:60 +#: library/system/src/include/hwinfo/classnames.rb:60 msgid "Ethernet controller" msgstr "이더넷 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:61 +#: library/system/src/include/hwinfo/classnames.rb:61 msgid "Token ring network controller" msgstr "토큰링 네트워크 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:62 +#: library/system/src/include/hwinfo/classnames.rb:62 msgid "FDDI network controller" msgstr "FDDI 네트워크 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:63 +#: library/system/src/include/hwinfo/classnames.rb:63 msgid "ATM network controller" msgstr "ATM 네트워크 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:64 +#: library/system/src/include/hwinfo/classnames.rb:64 msgid "ISDN controller" msgstr "ISDN 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:66 +#: library/system/src/include/hwinfo/classnames.rb:66 msgid "Myrinet controller" msgstr "Myrinet 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:69 -#: library/system/src/include/hwinfo/classnames.rb:73 +#: library/system/src/include/hwinfo/classnames.rb:69 +#: library/system/src/include/hwinfo/classnames.rb:73 msgid "Display controller" msgstr "디스플레이 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:70 +#: library/system/src/include/hwinfo/classnames.rb:70 msgid "VGA-compatible controller" msgstr "VGA 호환 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:71 +#: library/system/src/include/hwinfo/classnames.rb:71 msgid "XGA-compatible controller" msgstr "XGA 호환 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:72 +#: library/system/src/include/hwinfo/classnames.rb:72 msgid "3D controller" msgstr "3D 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:76 -#: library/system/src/include/hwinfo/classnames.rb:80 +#: library/system/src/include/hwinfo/classnames.rb:76 +#: library/system/src/include/hwinfo/classnames.rb:80 msgid "Multimedia controller" msgstr "멀티미디어 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:77 +#: library/system/src/include/hwinfo/classnames.rb:77 msgid "Multimedia video controller" msgstr "멀티미디어 비디오 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:78 +#: library/system/src/include/hwinfo/classnames.rb:78 msgid "Multimedia audio controller" msgstr "멀티미디어 오디오 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:79 +#: library/system/src/include/hwinfo/classnames.rb:79 msgid "Computer telephony device" msgstr "컴퓨터 전화 통신 장치" -#: library/system/src/include/hwinfo/classnames.rb:83 -#: library/system/src/include/hwinfo/classnames.rb:86 +#: library/system/src/include/hwinfo/classnames.rb:83 +#: library/system/src/include/hwinfo/classnames.rb:86 msgid "Memory controller" msgstr "메모리 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:84 +#: library/system/src/include/hwinfo/classnames.rb:84 msgid "RAM memory" msgstr "RAM 메모리" -#: library/system/src/include/hwinfo/classnames.rb:85 +#: library/system/src/include/hwinfo/classnames.rb:85 msgid "FLASH memory" msgstr "플래시 메모리" -#: library/system/src/include/hwinfo/classnames.rb:90 +#: library/system/src/include/hwinfo/classnames.rb:90 msgid "Host bridge" msgstr "호스트 브리지" -#: library/system/src/include/hwinfo/classnames.rb:91 +#: library/system/src/include/hwinfo/classnames.rb:91 msgid "ISA bridge" msgstr "ISA 브리지" -#: library/system/src/include/hwinfo/classnames.rb:92 +#: library/system/src/include/hwinfo/classnames.rb:92 msgid "EISA bridge" msgstr "EISA 브리지" -#: library/system/src/include/hwinfo/classnames.rb:93 +#: library/system/src/include/hwinfo/classnames.rb:93 msgid "MicroChannel bridge" msgstr "MicroChannel 브리지" -#: library/system/src/include/hwinfo/classnames.rb:94 +#: library/system/src/include/hwinfo/classnames.rb:94 msgid "PCI bridge" msgstr "PCI 브리지" -#: library/system/src/include/hwinfo/classnames.rb:95 +#: library/system/src/include/hwinfo/classnames.rb:95 msgid "PCMCIA bridge" msgstr "PCMCIA 브리지" -#: library/system/src/include/hwinfo/classnames.rb:96 +#: library/system/src/include/hwinfo/classnames.rb:96 msgid "NuBus bridge" msgstr "NuBus 브리지" -#: library/system/src/include/hwinfo/classnames.rb:97 +#: library/system/src/include/hwinfo/classnames.rb:97 msgid "CardBus bridge" msgstr "CardBus 브리지" -#: library/system/src/include/hwinfo/classnames.rb:98 +#: library/system/src/include/hwinfo/classnames.rb:98 msgid "RACEway bridge" msgstr "RACEway 브리지" -#: library/system/src/include/hwinfo/classnames.rb:99 +#: library/system/src/include/hwinfo/classnames.rb:99 msgid "Semitransparent PCI-to-PCI bridge" msgstr "반투명 PCI-to-PCI 브리지" -#: library/system/src/include/hwinfo/classnames.rb:100 +#: library/system/src/include/hwinfo/classnames.rb:100 msgid "InfiniBand to PCI host bridge" msgstr "InfiniBand to PCI 호스트 브리지" -#: library/system/src/include/hwinfo/classnames.rb:104 -#: library/system/src/include/hwinfo/classnames.rb:109 +#: library/system/src/include/hwinfo/classnames.rb:104 +#: library/system/src/include/hwinfo/classnames.rb:109 msgid "Communication controller" msgstr "통신 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:105 +#: library/system/src/include/hwinfo/classnames.rb:105 msgid "Serial controller" msgstr "직렬 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:106 +#: library/system/src/include/hwinfo/classnames.rb:106 msgid "Parallel controller" msgstr "병렬 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:107 +#: library/system/src/include/hwinfo/classnames.rb:107 msgid "Multiport serial controller" msgstr "다중 포트 직렬 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:112 +#: library/system/src/include/hwinfo/classnames.rb:112 msgid "Generic system peripheral" msgstr "일반 시스템 주변기기" -#: library/system/src/include/hwinfo/classnames.rb:113 +#: library/system/src/include/hwinfo/classnames.rb:113 msgid "PIC" msgstr "PIC" -#: library/system/src/include/hwinfo/classnames.rb:114 +#: library/system/src/include/hwinfo/classnames.rb:114 msgid "DMA controller" msgstr "DMA 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:115 +#: library/system/src/include/hwinfo/classnames.rb:115 msgid "Timer" msgstr "타이머" -#: library/system/src/include/hwinfo/classnames.rb:116 +#: library/system/src/include/hwinfo/classnames.rb:116 msgid "RTC" msgstr "RTC" -#: library/system/src/include/hwinfo/classnames.rb:117 +#: library/system/src/include/hwinfo/classnames.rb:117 msgid "PCI hotplug controller" msgstr "PCI 핫플러그 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:118 +#: library/system/src/include/hwinfo/classnames.rb:118 msgid "System peripheral" msgstr "시스템 주변기기" -#: library/system/src/include/hwinfo/classnames.rb:121 -#: library/system/src/include/hwinfo/classnames.rb:127 +#: library/system/src/include/hwinfo/classnames.rb:121 +#: library/system/src/include/hwinfo/classnames.rb:127 msgid "Input device controller" msgstr "입력 장치 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:122 +#: library/system/src/include/hwinfo/classnames.rb:122 msgid "Keyboard controller" msgstr "키보드 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:123 +#: library/system/src/include/hwinfo/classnames.rb:123 msgid "Digitizer pen" msgstr "디지타이저 펜" -#: library/system/src/include/hwinfo/classnames.rb:124 +#: library/system/src/include/hwinfo/classnames.rb:124 msgid "Mouse controller" msgstr "마우스 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:125 +#: library/system/src/include/hwinfo/classnames.rb:125 msgid "Scanner controller" msgstr "스캐너 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:126 +#: library/system/src/include/hwinfo/classnames.rb:126 msgid "Gameport controller" msgstr "게임포트 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:130 -#: library/system/src/include/hwinfo/classnames.rb:132 +#: library/system/src/include/hwinfo/classnames.rb:130 +#: library/system/src/include/hwinfo/classnames.rb:132 msgid "Docking station" msgstr "도킹 스테이션" -#: library/system/src/include/hwinfo/classnames.rb:131 +#: library/system/src/include/hwinfo/classnames.rb:131 msgid "Generic docking station" msgstr "일반 도킹 스테이션" -#: library/system/src/include/hwinfo/classnames.rb:135 +#: library/system/src/include/hwinfo/classnames.rb:135 msgid "Processor" msgstr "프로세서" -#: library/system/src/include/hwinfo/classnames.rb:136 +#: library/system/src/include/hwinfo/classnames.rb:136 msgid "386" msgstr "386" -#: library/system/src/include/hwinfo/classnames.rb:137 +#: library/system/src/include/hwinfo/classnames.rb:137 msgid "486" msgstr "486" -#: library/system/src/include/hwinfo/classnames.rb:138 +#: library/system/src/include/hwinfo/classnames.rb:138 msgid "Pentium" msgstr "Pentium" -#: library/system/src/include/hwinfo/classnames.rb:139 +#: library/system/src/include/hwinfo/classnames.rb:139 msgid "Alpha" msgstr "Alpha" -#: library/system/src/include/hwinfo/classnames.rb:140 +#: library/system/src/include/hwinfo/classnames.rb:140 msgid "Power PC" msgstr "Power PC" -#: library/system/src/include/hwinfo/classnames.rb:141 +#: library/system/src/include/hwinfo/classnames.rb:141 msgid "MIPS" msgstr "MIPS" -#: library/system/src/include/hwinfo/classnames.rb:142 +#: library/system/src/include/hwinfo/classnames.rb:142 msgid "Coprocessor" msgstr "보조 프로세서" -#: library/system/src/include/hwinfo/classnames.rb:145 +#: library/system/src/include/hwinfo/classnames.rb:145 msgid "Serial bus controller" msgstr "직렬 버스 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:146 +#: library/system/src/include/hwinfo/classnames.rb:146 msgid "FireWire (IEEE 1394)" msgstr "FireWire(IEEE 1394)" -#: library/system/src/include/hwinfo/classnames.rb:147 +#: library/system/src/include/hwinfo/classnames.rb:147 msgid "ACCESS bus" msgstr "ACCESS 버스" -#: library/system/src/include/hwinfo/classnames.rb:148 +#: library/system/src/include/hwinfo/classnames.rb:148 msgid "SSA" msgstr "SSA" -#: library/system/src/include/hwinfo/classnames.rb:149 +#: library/system/src/include/hwinfo/classnames.rb:149 msgid "USB controller" msgstr "USB 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:150 +#: library/system/src/include/hwinfo/classnames.rb:150 msgid "Fiber channel" msgstr "파이버 채널" -#: library/system/src/include/hwinfo/classnames.rb:151 +#: library/system/src/include/hwinfo/classnames.rb:151 msgid "SMBus" msgstr "SMBus" -#: library/system/src/include/hwinfo/classnames.rb:155 -#: library/system/src/include/hwinfo/classnames.rb:159 +#: library/system/src/include/hwinfo/classnames.rb:155 +#: library/system/src/include/hwinfo/classnames.rb:159 msgid "Wireless controller" msgstr "무선 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:156 +#: library/system/src/include/hwinfo/classnames.rb:156 msgid "IRDA controller" msgstr "IRDA 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:157 +#: library/system/src/include/hwinfo/classnames.rb:157 msgid "Consumer IR controller" msgstr "Consumer IR 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:158 +#: library/system/src/include/hwinfo/classnames.rb:158 msgid "RF controller" msgstr "RF 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:161 +#: library/system/src/include/hwinfo/classnames.rb:161 msgid "Intelligent controller" msgstr "인텔리전트 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:161 +#: library/system/src/include/hwinfo/classnames.rb:161 msgid "I2O" msgstr "I20" -#: library/system/src/include/hwinfo/classnames.rb:163 +#: library/system/src/include/hwinfo/classnames.rb:163 msgid "Satellite communications controller" msgstr "위성 통신 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:164 +#: library/system/src/include/hwinfo/classnames.rb:164 msgid "Satellite TV controller" msgstr "위성 TV 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:165 +#: library/system/src/include/hwinfo/classnames.rb:165 msgid "Satellite audio communication controller" msgstr "위성 오디오 통신 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:166 +#: library/system/src/include/hwinfo/classnames.rb:166 msgid "Satellite voice communication controller" msgstr "위성 음성 통신 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:167 +#: library/system/src/include/hwinfo/classnames.rb:167 msgid "Satellite data communication controller" msgstr "위성 데이터 통신 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:170 -#: library/system/src/include/hwinfo/classnames.rb:173 +#: library/system/src/include/hwinfo/classnames.rb:170 +#: library/system/src/include/hwinfo/classnames.rb:173 msgid "Encryption controller" msgstr "암호화 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:171 +#: library/system/src/include/hwinfo/classnames.rb:171 msgid "Network and computing encryption device" msgstr "네트워크 및 컴퓨팅 암호화 장치" -#: library/system/src/include/hwinfo/classnames.rb:172 +#: library/system/src/include/hwinfo/classnames.rb:172 msgid "Entertainment encryption device" msgstr "엔터테인먼트 암호화 장치" -#: library/system/src/include/hwinfo/classnames.rb:176 -#: library/system/src/include/hwinfo/classnames.rb:180 +#: library/system/src/include/hwinfo/classnames.rb:176 +#: library/system/src/include/hwinfo/classnames.rb:180 msgid "Signal processing controller" msgstr "신호 처리 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:177 +#: library/system/src/include/hwinfo/classnames.rb:177 msgid "DPIO module" msgstr "DPIO 모듈" -#: library/system/src/include/hwinfo/classnames.rb:178 +#: library/system/src/include/hwinfo/classnames.rb:178 msgid "Performance counters" msgstr "성능 카운터" -#: library/system/src/include/hwinfo/classnames.rb:179 +#: library/system/src/include/hwinfo/classnames.rb:179 msgid "Communication synchronizer" msgstr "통신 동기화 프로그램" -#: library/system/src/include/hwinfo/classnames.rb:184 +#: library/system/src/include/hwinfo/classnames.rb:184 msgid "Monitor" msgstr "모니터" -#: library/system/src/include/hwinfo/classnames.rb:185 +#: library/system/src/include/hwinfo/classnames.rb:185 msgid "CRT monitor" msgstr "CRT 모니터" -#: library/system/src/include/hwinfo/classnames.rb:186 +#: library/system/src/include/hwinfo/classnames.rb:186 msgid "LCD monitor" msgstr "LCD 모니터" -#: library/system/src/include/hwinfo/classnames.rb:189 +#: library/system/src/include/hwinfo/classnames.rb:189 msgid "Internally used class" msgstr "내부적으로 사용되는 클래스" -#: library/system/src/include/hwinfo/classnames.rb:190 +#: library/system/src/include/hwinfo/classnames.rb:190 msgid "ISA PnP interface" msgstr "ISA PnP 인터페이스" -#: library/system/src/include/hwinfo/classnames.rb:191 +#: library/system/src/include/hwinfo/classnames.rb:191 msgid "Main memory" msgstr "주 메모리" -#: library/system/src/include/hwinfo/classnames.rb:192 +#: library/system/src/include/hwinfo/classnames.rb:192 msgid "CPU" msgstr "CPU" -#: library/system/src/include/hwinfo/classnames.rb:193 +#: library/system/src/include/hwinfo/classnames.rb:193 msgid "FPU" msgstr "FPU" -#: library/system/src/include/hwinfo/classnames.rb:194 +#: library/system/src/include/hwinfo/classnames.rb:194 msgid "BIOS" msgstr "BIOS" -#: library/system/src/include/hwinfo/classnames.rb:195 +#: library/system/src/include/hwinfo/classnames.rb:195 msgid "PROM" msgstr "PROM" -#: library/system/src/include/hwinfo/classnames.rb:196 +#: library/system/src/include/hwinfo/classnames.rb:196 msgid "System" msgstr "시스템" -#: library/system/src/include/hwinfo/classnames.rb:198 +#: library/system/src/include/hwinfo/classnames.rb:198 msgid "Win modem" msgstr "Win 모뎀" -#: library/system/src/include/hwinfo/classnames.rb:199 +#: library/system/src/include/hwinfo/classnames.rb:199 msgid "ISDN adapter" msgstr "ISDN 어댑터" -#: library/system/src/include/hwinfo/classnames.rb:200 +#: library/system/src/include/hwinfo/classnames.rb:200 msgid "PS/2 controller" msgstr "PS/2 컨트롤러" -#: library/system/src/include/hwinfo/classnames.rb:202 -#: library/system/src/include/hwinfo/classnames.rb:207 +#: library/system/src/include/hwinfo/classnames.rb:202 +#: library/system/src/include/hwinfo/classnames.rb:207 msgid "Mouse" msgstr "마우스" -#: library/system/src/include/hwinfo/classnames.rb:203 +#: library/system/src/include/hwinfo/classnames.rb:203 msgid "PS/2 mouse" msgstr "PS/2 마우스" -#: library/system/src/include/hwinfo/classnames.rb:204 +#: library/system/src/include/hwinfo/classnames.rb:204 msgid "Serial mouse" msgstr "직렬 마우스" -#: library/system/src/include/hwinfo/classnames.rb:205 +#: library/system/src/include/hwinfo/classnames.rb:205 msgid "Bus mouse" msgstr "버스 마우스" -#: library/system/src/include/hwinfo/classnames.rb:206 +#: library/system/src/include/hwinfo/classnames.rb:206 msgid "USB mouse" msgstr "USB 마우스" -#: library/system/src/include/hwinfo/classnames.rb:210 +#: library/system/src/include/hwinfo/classnames.rb:210 msgid "Mass storage device" msgstr "대용량 저장 장치" -#: library/system/src/include/hwinfo/classnames.rb:211 +#: library/system/src/include/hwinfo/classnames.rb:211 msgid "Disk" msgstr "디스크" -#: library/system/src/include/hwinfo/classnames.rb:212 +#: library/system/src/include/hwinfo/classnames.rb:212 msgid "Tape" msgstr "테이프" -#: library/system/src/include/hwinfo/classnames.rb:213 +#: library/system/src/include/hwinfo/classnames.rb:213 msgid "CD-ROM" msgstr "CD-ROM" -#: library/system/src/include/hwinfo/classnames.rb:214 +#: library/system/src/include/hwinfo/classnames.rb:214 msgid "Floppy disk" msgstr "플로피 디스크" -#: library/system/src/include/hwinfo/classnames.rb:215 +#: library/system/src/include/hwinfo/classnames.rb:215 msgid "Storage device" msgstr "저장 장치" -#: library/system/src/include/hwinfo/classnames.rb:218 -#: library/system/src/include/hwinfo/classnames.rb:229 +#: library/system/src/include/hwinfo/classnames.rb:218 +#: library/system/src/include/hwinfo/classnames.rb:229 msgid "Network interface" msgstr "네트워크 인터페이스" -#: library/system/src/include/hwinfo/classnames.rb:221 +#: library/system/src/include/hwinfo/classnames.rb:221 msgid "Token ring" msgstr "토큰링" -#: library/system/src/include/hwinfo/classnames.rb:225 +#: library/system/src/include/hwinfo/classnames.rb:225 msgid "HSI" msgstr "HSI" -#: library/system/src/include/hwinfo/classnames.rb:232 -#: library/system/src/include/hwinfo/classnames.rb:233 +#: library/system/src/include/hwinfo/classnames.rb:232 +#: library/system/src/include/hwinfo/classnames.rb:233 msgid "Keyboard" msgstr "키보드" -#: library/system/src/include/hwinfo/classnames.rb:234 +#: library/system/src/include/hwinfo/classnames.rb:234 msgid "Console" msgstr "콘솔" -#: library/system/src/include/hwinfo/classnames.rb:236 +#: library/system/src/include/hwinfo/classnames.rb:236 msgid "Printer" msgstr "프린터" -#: library/system/src/include/hwinfo/classnames.rb:237 +#: library/system/src/include/hwinfo/classnames.rb:237 msgid "Hub" msgstr "허브" -#: library/system/src/include/hwinfo/classnames.rb:237 +#: library/system/src/include/hwinfo/classnames.rb:237 msgid "USB hub" msgstr "USB 허브" -#: library/system/src/include/hwinfo/classnames.rb:238 +#: library/system/src/include/hwinfo/classnames.rb:238 msgid "Braille display" msgstr "점자 디스플레이" -#: library/system/src/include/hwinfo/classnames.rb:239 +#: library/system/src/include/hwinfo/classnames.rb:239 msgid "Scanner" msgstr "스캐너" -#: library/system/src/include/hwinfo/classnames.rb:240 +#: library/system/src/include/hwinfo/classnames.rb:240 msgid "Joystick" msgstr "조이스틱" -#: library/system/src/include/hwinfo/classnames.rb:240 +#: library/system/src/include/hwinfo/classnames.rb:240 msgid "Gamepad" msgstr "게임패드" -#: library/system/src/include/hwinfo/classnames.rb:241 +#: library/system/src/include/hwinfo/classnames.rb:241 msgid "Chipcard reader" msgstr "칩카드 판독기" -#: library/system/src/include/hwinfo/classnames.rb:243 +#: library/system/src/include/hwinfo/classnames.rb:243 msgid "Camera" msgstr "카메라" -#: library/system/src/include/hwinfo/classnames.rb:244 +#: library/system/src/include/hwinfo/classnames.rb:244 msgid "Webcam" msgstr "웹캠" -#: library/system/src/include/hwinfo/classnames.rb:245 +#: library/system/src/include/hwinfo/classnames.rb:245 msgid "Digital camera" msgstr "디지털 카메라" -#: library/system/src/include/hwinfo/classnames.rb:247 +#: library/system/src/include/hwinfo/classnames.rb:247 msgid "Framebuffer" msgstr "프레임버퍼" -#: library/system/src/include/hwinfo/classnames.rb:247 +#: library/system/src/include/hwinfo/classnames.rb:247 msgid "VESA framebuffer" msgstr "VESA 프레임버퍼" -#: library/system/src/include/hwinfo/classnames.rb:249 +#: library/system/src/include/hwinfo/classnames.rb:249 msgid "DVB card" msgstr "DVB 카드" -#: library/system/src/include/hwinfo/classnames.rb:250 +#: library/system/src/include/hwinfo/classnames.rb:250 msgid "DVB-C card" msgstr "DVB-C 카드" -#: library/system/src/include/hwinfo/classnames.rb:251 +#: library/system/src/include/hwinfo/classnames.rb:251 msgid "DVB-S card" msgstr "DVB-S 카드" -#: library/system/src/include/hwinfo/classnames.rb:252 +#: library/system/src/include/hwinfo/classnames.rb:252 msgid "DVB-T card" msgstr "DVB-T 카드" -#: library/system/src/include/hwinfo/classnames.rb:254 +#: library/system/src/include/hwinfo/classnames.rb:254 msgid "TV card" msgstr "TV 카드" -#: library/system/src/include/hwinfo/classnames.rb:255 +#: library/system/src/include/hwinfo/classnames.rb:255 msgid "Partition" msgstr "파티션" -#: library/system/src/include/hwinfo/classnames.rb:256 +#: library/system/src/include/hwinfo/classnames.rb:256 msgid "DSL card" msgstr "DSL 카드" -#: library/system/src/include/hwinfo/classnames.rb:257 +#: library/system/src/include/hwinfo/classnames.rb:257 msgid "Bluetooth device" msgstr "Bluetooth 장치" -#. Runs arguments without changed root. -#. @see http://www.rubydoc.info/github/openSUSE/cheetah/Cheetah.run parameter docs -#. @raise Cheetah::ExecutionFailed -#: library/system/src/lib/yast2/execute.rb:67 +#. Runs arguments without changed root. +#. @see http://www.rubydoc.info/github/openSUSE/cheetah/Cheetah.run parameter docs +#. @raise Cheetah::ExecutionFailed +#: library/system/src/lib/yast2/execute.rb:67 msgid "" "Execution of command \"%{command}\" failed.\n" "Exit code: %{exitcode}\n" @@ -5118,8 +5008,8 @@ "종료 코드: %{exitcode}\n" "오류 출력: %{stderr}" -#. Continue/Cancel question, %1 is a coma separated list of file names -#: library/system/src/modules/FileChanges.rb:178 +#. Continue/Cancel question, %1 is a coma separated list of file names +#: library/system/src/modules/FileChanges.rb:178 msgid "" "Files %1 have been changed manually.\n" "YaST might lose some of the changes" @@ -5127,8 +5017,8 @@ "%1개 파일이 수동으로 변경되었습니다.\n" "YaST의 일부 변경사항이 손실될 수 있습니다." -#. Continue/Cancel question, %1 is a file name -#: library/system/src/modules/FileChanges.rb:180 +#. Continue/Cancel question, %1 is a file name +#: library/system/src/modules/FileChanges.rb:180 msgid "" "File %1 has been changed manually.\n" "YaST might lose some of the changes.\n" @@ -5136,13 +5026,13 @@ "%1 파일이 수동으로 변경되었습니다.\n" "YaST에서 일부 변경사항이 손실될 수도 있습니다.\n" -#: library/system/src/modules/FileChanges.rb:192 +#: library/system/src/modules/FileChanges.rb:192 msgid "Do not show this message anymore" msgstr "이 메시지를 다시 표시하지 않음" -#. TRANSLATORS: Continue/Cancel question, %s is a single file name or -#. a comma separated list of file names. -#: library/system/src/modules/FileChanges.rb:229 +#. TRANSLATORS: Continue/Cancel question, %s is a single file name or +#. a comma separated list of file names. +#: library/system/src/modules/FileChanges.rb:229 msgid "" "File %s has been created manually.\n" "YaST might lose this file." @@ -5153,13 +5043,13 @@ "%s 파일이 수동으로 생성되었습니다.\n" "YaST에서 해당 파일이 손실될 수 있습니다." -#. error report -#: library/system/src/modules/Initrd.rb:415 +#. error report +#: library/system/src/modules/Initrd.rb:415 msgid "An error occurred during initrd creation." msgstr "initrd 생성하는동안 오류가 발생했습니다." -#. inform the user that he/she has to reboot to activate new kernel -#: library/system/src/modules/Kernel.rb:657 +#. inform the user that he/she has to reboot to activate new kernel +#: library/system/src/modules/Kernel.rb:657 msgid "" "Reboot your system\n" "to activate the new kernel.\n" @@ -5167,25 +5057,25 @@ "시스템을 재부팅해서\n" "새로운 커널을 활성합니다.\n" -#. bnc #421002 -#: library/system/src/modules/ModuleLoading.rb:177 +#. bnc #421002 +#: library/system/src/modules/ModuleLoading.rb:177 msgid "Confirm driver activation" msgstr "드라이버 활성을 확인합니다" -#. This is in information message. Next come the -#. vendor and device information strings as stored -#. in the hardware-probing database. -#: library/system/src/modules/ModuleLoading.rb:184 +#. This is in information message. Next come the +#. vendor and device information strings as stored +#. in the hardware-probing database. +#: library/system/src/modules/ModuleLoading.rb:184 msgid "YaST2 detected the following device" msgstr "YaST2에서 아래 장치를 검색했습니다." -#. Caption for Textentry with module information -#: library/system/src/modules/ModuleLoading.rb:193 +#. Caption for Textentry with module information +#: library/system/src/modules/ModuleLoading.rb:193 msgid "&Driver/Module to load" msgstr "적재할 드라이버/모듈(&D)" -#. describe valid MAC address -#: library/types/src/modules/Address.rb:80 +#. describe valid MAC address +#: library/types/src/modules/Address.rb:80 msgid "" "A valid MAC address consists of six pairs of hexadecimal\n" "digits separated by colons." @@ -5193,8 +5083,8 @@ "유효한 MAC 주소는 16진수로 구성된 6쌍으로 되어 있으며,\n" "각 숫자는 콜론으로 구분되어 있습니다." -#. Translators: dot: ".", hyphen: "-" -#: library/types/src/modules/Hostname.rb:56 +#. Translators: dot: ".", hyphen: "-" +#: library/types/src/modules/Hostname.rb:56 msgid "" "A valid domain name consists of components separated by dots.\n" "Each component contains letters, digits, and hyphens. A hyphen may not\n" @@ -5205,8 +5095,8 @@ "하이픈은 시작이나 끝의 구성요소로 올수가 없습니다.\n" "그리고 마지막 구성요소는 숫자로 시작할 수 없습니다." -#. Translators: hyphen: "-" -#: library/types/src/modules/Hostname.rb:67 +#. Translators: hyphen: "-" +#: library/types/src/modules/Hostname.rb:67 msgid "" "A valid host name consists of letters, digits, and hyphens.\n" "A host name may not begin or end with a hyphen.\n" @@ -5214,8 +5104,8 @@ "유효한 호스트 이름은 문자, 숫자 및 하이픈으로 구성됩니다.\n" "호스트 이름의 시작과 끝에는 하이픈이 사용되지 않습니다.\n" -#. Translators: dot: "." -#: library/types/src/modules/IP.rb:56 +#. Translators: dot: "." +#: library/types/src/modules/IP.rb:56 msgid "" "A valid IPv4 address consists of four integers\n" "in the range 0-255 separated by dots." @@ -5223,8 +5113,8 @@ "유효한 IPv4 주소는 점으로 구분된 0-255 범위의 정수 네 개로\n" "구성됩니다." -#. Translators: colon: ":" -#: library/types/src/modules/IP.rb:74 +#. Translators: colon: ":" +#: library/types/src/modules/IP.rb:74 msgid "" "A valid IPv6 address consists of up to eight\n" "hexadecimal numbers in the range 0 - FFFF separated by colons.\n" @@ -5234,8 +5124,8 @@ "0 - FFFF 범위의 최대 8개 16진수로 구성됩니다.\n" "이것은 최대 1개의 이중 콜론을 포함할 수 있습니다." -#. TRANSLATORS: description of the valid network definition -#: library/types/src/modules/IP.rb:128 +#. TRANSLATORS: description of the valid network definition +#: library/types/src/modules/IP.rb:128 msgid "" "A valid network definition can contain the IP,\n" "IP/Netmask, IP/Netmask_Bits, or 0/0 for all networks.\n" @@ -5251,76 +5141,75 @@ "예:\n" "IP: 192.168.0.1 또는 2001:db8:0::1\n" "IP/Netmask: 192.168.0.0/255.255.255.0 또는 2001:db8:0::1/56\n" -"IP/Netmask_Bits: 192.168.0.0/24 또는 192.168.0.1/32 또는 2001:db8:0::1/" -"ffff::0\n" +"IP/Netmask_Bits: 192.168.0.0/24 또는 192.168.0.1/32 또는 2001:db8:0::1/ffff::0\n" -#. Byte abbreviated -#: library/types/src/modules/String.rb:127 +#. Byte abbreviated +#: library/types/src/modules/String.rb:127 msgid "B" msgstr "B" -#. KiloByte abbreviated -#: library/types/src/modules/String.rb:129 +#. KiloByte abbreviated +#: library/types/src/modules/String.rb:129 msgid "KiB" msgstr "KiB" -#. MegaByte abbreviated -#: library/types/src/modules/String.rb:131 +#. MegaByte abbreviated +#: library/types/src/modules/String.rb:131 msgid "MiB" msgstr "MiB" -#. GigaByte abbreviated -#: library/types/src/modules/String.rb:133 +#. GigaByte abbreviated +#: library/types/src/modules/String.rb:133 msgid "GiB" msgstr "GiB" -#. TeraByte abbreviated -#: library/types/src/modules/String.rb:135 +#. TeraByte abbreviated +#: library/types/src/modules/String.rb:135 msgid "TiB" msgstr "TiB" -#. format download rate message: %1 = the current download rate (e.g. "242.6kB/s") -#. %2 is the average download rate (e.g. "228.3kB/s") -#. to translators: keep translation of "on average" as short as possible -#: library/types/src/modules/String.rb:201 +#. format download rate message: %1 = the current download rate (e.g. "242.6kB/s") +#. %2 is the average download rate (e.g. "228.3kB/s") +#. to translators: keep translation of "on average" as short as possible +#: library/types/src/modules/String.rb:201 msgid "%1 (on average %2)" msgstr "%1(평균 %2)" -#. ellipsis - used to replace part of text to make it shorter -#. example: "/really/very/long/file/name", "/.../file/name") -#: library/types/src/modules/String.rb:730 +#. ellipsis - used to replace part of text to make it shorter +#. example: "/really/very/long/file/name", "/.../file/name") +#: library/types/src/modules/String.rb:730 msgid "..." msgstr "..." -#. covert a number to download rate string -#. %1 is string - size in bytes, B, KiB, MiB, GiB or TiB -#: library/types/src/modules/String.rb:846 +#. covert a number to download rate string +#. %1 is string - size in bytes, B, KiB, MiB, GiB or TiB +#: library/types/src/modules/String.rb:846 msgid "%1/s" msgstr "%1/s" -#. Popup-Box for manual hardware detection. -#. If the user selects 'manual installation' when -#. booting from CD, YaST2 does not load any modules -#. automatically, but asks the user for confirmation -#. about every module. -#. The popup box informs the user about the detected -#. hardware and suggests a module to load. -#. The user can confirm the module or change -#. the suggested load command -#. -#. This is the heading of the popup box -#: library/wizard/src/modules/Confirm.rb:102 +#. Popup-Box for manual hardware detection. +#. If the user selects 'manual installation' when +#. booting from CD, YaST2 does not load any modules +#. automatically, but asks the user for confirmation +#. about every module. +#. The popup box informs the user about the detected +#. hardware and suggests a module to load. +#. The user can confirm the module or change +#. the suggested load command +#. +#. This is the heading of the popup box +#: library/wizard/src/modules/Confirm.rb:102 msgid "Confirm Hardware Detection" msgstr "하드웨어 검색 확인" -#. This is in information message. Next come the -#. hardware class name (network cards). -#: library/wizard/src/modules/Confirm.rb:107 +#. This is in information message. Next come the +#. hardware class name (network cards). +#: library/wizard/src/modules/Confirm.rb:107 msgid "YaST will detect the following hardware:" msgstr "YaST는 다음 하드웨어를 검색합니다." -#. Message in a continue/cancel popup -#: library/wizard/src/modules/Confirm.rb:182 +#. Message in a continue/cancel popup +#: library/wizard/src/modules/Confirm.rb:182 msgid "" "This module must be run as root.\n" "If you continue now, the module may not function properly.\n" @@ -5332,36 +5221,36 @@ " 예를 들어 일부 설정이 제대로 읽히지 않고\n" " 설정이 기록되지 않을 수 있습니다.\n" -#. Popup headline -#: library/wizard/src/modules/Confirm.rb:190 +#. Popup headline +#: library/wizard/src/modules/Confirm.rb:190 msgid "Root Privileges Needed" msgstr "루트 권한 필요" -#. Popup question -#: library/wizard/src/modules/Confirm.rb:207 +#. Popup question +#: library/wizard/src/modules/Confirm.rb:207 msgid "Really delete selected entry?" msgstr "선택한 항목을 삭제하시겠습니까?" -#. Popup question, %1 is an item to delete (or filename, etc.) -#: library/wizard/src/modules/Confirm.rb:221 +#. Popup question, %1 is an item to delete (or filename, etc.) +#: library/wizard/src/modules/Confirm.rb:221 msgid "Really delete '%1'?" msgstr "'%1'을(를) 삭제하시겠습니까?" -#. button text -#. Open a dialog with "Accept", "Cancel" -#. and set the keyboard focus to "Accept". -#: library/wizard/src/modules/Wizard.rb:259 -#: library/wizard/src/modules/Wizard.rb:508 +#. button text +#. Open a dialog with "Accept", "Cancel" +#. and set the keyboard focus to "Accept". +#: library/wizard/src/modules/Wizard.rb:259 +#: library/wizard/src/modules/Wizard.rb:508 msgid "&Apply" msgstr "적용(&A)" -#. translators: dialog title to appear before any content is initialized -#: library/wizard/src/modules/Wizard.rb:286 +#. translators: dialog title to appear before any content is initialized +#: library/wizard/src/modules/Wizard.rb:286 msgid "Initializing ..." msgstr "초기화 중..." -#. translators: dialog title to appear before any content is initialized -#: library/wizard/src/modules/Wizard.rb:339 +#. translators: dialog title to appear before any content is initialized +#: library/wizard/src/modules/Wizard.rb:339 msgid "" "YaST\n" "Initializing ...\n" @@ -5369,631 +5258,631 @@ "YaST\n" "초기화하는 중입니다.\n" -#. Heading for help popup window -#: library/wizard/src/modules/Wizard.rb:375 +#. Heading for help popup window +#: library/wizard/src/modules/Wizard.rb:375 msgid "Help" msgstr "도움말" -#. fallback name for the dialog title -#. fallback name for the dialog title -#: library/wizard/src/modules/Wizard.rb:1134 -#: library/wizard/src/modules/Wizard.rb:1188 +#. fallback name for the dialog title +#. fallback name for the dialog title +#: library/wizard/src/modules/Wizard.rb:1134 +#: library/wizard/src/modules/Wizard.rb:1188 msgid "Module" msgstr "모듈" -#: library/general/src/data/country.ycp:32 -#: library/general/src/data/country_long.ycp:33 +#: library/general/src/data/country.ycp:32 +#: library/general/src/data/country_long.ycp:33 msgid "United Arab Emirates" msgstr "아랍에미리트" -#: library/general/src/data/country.ycp:33 -#: library/general/src/data/country_long.ycp:144 +#: library/general/src/data/country.ycp:33 +#: library/general/src/data/country_long.ycp:144 msgid "Albania" msgstr "알바니아" -#: library/general/src/data/country.ycp:34 -#: library/general/src/data/country_long.ycp:81 +#: library/general/src/data/country.ycp:34 +#: library/general/src/data/country_long.ycp:81 msgid "Argentina" msgstr "아르헨티나" -#: library/general/src/data/country.ycp:35 -#: library/general/src/data/country_long.ycp:60 +#: library/general/src/data/country.ycp:35 +#: library/general/src/data/country_long.ycp:60 msgid "Austria" msgstr "오스트리아" -#: library/general/src/data/country.ycp:36 -#: library/general/src/data/country_long.ycp:66 +#: library/general/src/data/country.ycp:36 +#: library/general/src/data/country_long.ycp:66 msgid "Australia" msgstr "오스트레일리아" -#: library/general/src/data/country.ycp:37 -#: library/general/src/data/country_long.ycp:55 +#: library/general/src/data/country.ycp:37 +#: library/general/src/data/country_long.ycp:55 msgid "Bosnia and Herzegowina" msgstr "보스니아 헤르제고비나" -#: library/general/src/data/country.ycp:38 -#: library/general/src/data/country_long.ycp:61 -#: library/general/src/data/country_long.ycp:68 -#: library/general/src/data/country_long.ycp:105 -#: library/general/src/data/country_long.ycp:130 +#: library/general/src/data/country.ycp:38 +#: library/general/src/data/country_long.ycp:61 +#: library/general/src/data/country_long.ycp:68 +#: library/general/src/data/country_long.ycp:105 +#: library/general/src/data/country_long.ycp:130 msgid "Belgium" msgstr "벨기에" -#: library/general/src/data/country.ycp:39 -#: library/general/src/data/country_long.ycp:52 +#: library/general/src/data/country.ycp:39 +#: library/general/src/data/country_long.ycp:52 msgid "Bulgaria" msgstr "불가리아" -#: library/general/src/data/country.ycp:40 -#: library/general/src/data/country_long.ycp:34 +#: library/general/src/data/country.ycp:40 +#: library/general/src/data/country_long.ycp:34 msgid "Bahrein" msgstr "바레인" -#: library/general/src/data/country.ycp:41 -#: library/general/src/data/country_long.ycp:53 +#: library/general/src/data/country.ycp:41 +#: library/general/src/data/country_long.ycp:53 msgid "Bangladesh" msgstr "방글라데시" -#: library/general/src/data/country.ycp:42 -#: library/general/src/data/country_long.ycp:82 +#: library/general/src/data/country.ycp:42 +#: library/general/src/data/country_long.ycp:82 msgid "Bolivia" msgstr "볼리비아" -#: library/general/src/data/country.ycp:43 -#: library/general/src/data/country_long.ycp:136 +#: library/general/src/data/country.ycp:43 +#: library/general/src/data/country_long.ycp:136 msgid "Brasil" msgstr "브라질" -#: library/general/src/data/country.ycp:44 -#: library/general/src/data/country_long.ycp:67 +#: library/general/src/data/country.ycp:44 +#: library/general/src/data/country_long.ycp:67 msgid "Botswana" msgstr "보츠와나" -#: library/general/src/data/country.ycp:45 -#: library/general/src/data/country_long.ycp:51 +#: library/general/src/data/country.ycp:45 +#: library/general/src/data/country_long.ycp:51 msgid "Belarus" msgstr "벨라루스" -#: library/general/src/data/country.ycp:46 -#: library/general/src/data/country_long.ycp:69 -#: library/general/src/data/country_long.ycp:106 +#: library/general/src/data/country.ycp:46 +#: library/general/src/data/country_long.ycp:69 +#: library/general/src/data/country_long.ycp:106 msgid "Canada" msgstr "캐나다" -#: library/general/src/data/country.ycp:47 -#: library/general/src/data/country_long.ycp:62 -#: library/general/src/data/country_long.ycp:107 -#: library/general/src/data/country_long.ycp:118 +#: library/general/src/data/country.ycp:47 +#: library/general/src/data/country_long.ycp:62 +#: library/general/src/data/country_long.ycp:107 +#: library/general/src/data/country_long.ycp:118 msgid "Switzerland" msgstr "스위스" -#: library/general/src/data/country.ycp:48 -#: library/general/src/data/country_long.ycp:83 +#: library/general/src/data/country.ycp:48 +#: library/general/src/data/country_long.ycp:83 msgid "Chile" msgstr "칠레" -#: library/general/src/data/country.ycp:49 -#: library/general/src/data/country_long.ycp:158 +#: library/general/src/data/country.ycp:49 +#: library/general/src/data/country_long.ycp:158 msgid "Peoples Republic of China" msgstr "중국" -#: library/general/src/data/country.ycp:50 -#: library/general/src/data/country_long.ycp:84 +#: library/general/src/data/country.ycp:50 +#: library/general/src/data/country_long.ycp:84 msgid "Colombia" msgstr "콜롬비아" -#: library/general/src/data/country.ycp:51 -#: library/general/src/data/country_long.ycp:85 +#: library/general/src/data/country.ycp:51 +#: library/general/src/data/country_long.ycp:85 msgid "Costa Rica" msgstr "코스타리카" -#: library/general/src/data/country.ycp:52 -#: library/general/src/data/country_long.ycp:57 +#: library/general/src/data/country.ycp:52 +#: library/general/src/data/country_long.ycp:57 msgid "Czech Republic" msgstr "체코" -#: library/general/src/data/country.ycp:53 -#: library/general/src/data/country_long.ycp:63 +#: library/general/src/data/country.ycp:53 +#: library/general/src/data/country_long.ycp:63 msgid "Germany" msgstr "독일" -#: library/general/src/data/country.ycp:54 -#: library/general/src/data/country_long.ycp:59 -#: library/general/src/data/country_long.ycp:70 +#: library/general/src/data/country.ycp:54 +#: library/general/src/data/country_long.ycp:59 +#: library/general/src/data/country_long.ycp:70 msgid "Denmark" msgstr "덴마크" -#: library/general/src/data/country.ycp:55 -#: library/general/src/data/country_long.ycp:86 +#: library/general/src/data/country.ycp:55 +#: library/general/src/data/country_long.ycp:86 msgid "Dominican Republic" msgstr "도미니카 공화국" -#: library/general/src/data/country.ycp:56 -#: library/general/src/data/country_long.ycp:35 +#: library/general/src/data/country.ycp:56 +#: library/general/src/data/country_long.ycp:35 msgid "Algeria" msgstr "알제리" -#: library/general/src/data/country.ycp:57 -#: library/general/src/data/country_long.ycp:87 +#: library/general/src/data/country.ycp:57 +#: library/general/src/data/country_long.ycp:87 msgid "Ecuador" msgstr "에쿠아도르" -#: library/general/src/data/country.ycp:58 -#: library/general/src/data/country_long.ycp:101 +#: library/general/src/data/country.ycp:58 +#: library/general/src/data/country_long.ycp:101 msgid "Estonia" msgstr "에스토니아" -#: library/general/src/data/country.ycp:59 -#: library/general/src/data/country_long.ycp:36 +#: library/general/src/data/country.ycp:59 +#: library/general/src/data/country_long.ycp:36 msgid "Egypt" msgstr "이집트" -#: library/general/src/data/country.ycp:60 -#: library/general/src/data/country_long.ycp:56 +#: library/general/src/data/country.ycp:60 +#: library/general/src/data/country_long.ycp:56 msgid "Catalonia" msgstr "카탈로니아" -#: library/general/src/data/country.ycp:61 -#: library/general/src/data/country_long.ycp:88 -#: library/general/src/data/country_long.ycp:102 -#: library/general/src/data/country_long.ycp:111 +#: library/general/src/data/country.ycp:61 +#: library/general/src/data/country_long.ycp:88 +#: library/general/src/data/country_long.ycp:102 +#: library/general/src/data/country_long.ycp:111 msgid "Spain" msgstr "스페인" -#: library/general/src/data/country.ycp:62 -#: library/general/src/data/country_long.ycp:103 -#: library/general/src/data/country_long.ycp:146 +#: library/general/src/data/country.ycp:62 +#: library/general/src/data/country_long.ycp:103 +#: library/general/src/data/country_long.ycp:146 msgid "Finland" msgstr "핀란드" -#: library/general/src/data/country.ycp:63 -#: library/general/src/data/country_long.ycp:104 +#: library/general/src/data/country.ycp:63 +#: library/general/src/data/country_long.ycp:104 msgid "Faroe Islands" msgstr "페로 군도" -#: library/general/src/data/country.ycp:64 -#: library/general/src/data/country_long.ycp:54 -#: library/general/src/data/country_long.ycp:108 -#: library/general/src/data/country_long.ycp:134 +#: library/general/src/data/country.ycp:64 +#: library/general/src/data/country_long.ycp:54 +#: library/general/src/data/country_long.ycp:108 +#: library/general/src/data/country_long.ycp:134 msgid "France" msgstr "프랑스" -#: library/general/src/data/country.ycp:65 -#: library/general/src/data/country_long.ycp:58 -#: library/general/src/data/country_long.ycp:71 -#: library/general/src/data/country_long.ycp:112 -#: library/general/src/data/country_long.ycp:123 +#: library/general/src/data/country.ycp:65 +#: library/general/src/data/country_long.ycp:58 +#: library/general/src/data/country_long.ycp:71 +#: library/general/src/data/country_long.ycp:112 +#: library/general/src/data/country_long.ycp:123 msgid "Great Britain" msgstr "영국" -#: library/general/src/data/country.ycp:66 -#: library/general/src/data/country_long.ycp:121 +#: library/general/src/data/country.ycp:66 +#: library/general/src/data/country_long.ycp:121 msgid "Georgia" msgstr "그루지아" -#: library/general/src/data/country.ycp:67 -#: library/general/src/data/country_long.ycp:122 +#: library/general/src/data/country.ycp:67 +#: library/general/src/data/country_long.ycp:122 msgid "Greenland" msgstr "그린란드" -#: library/general/src/data/country.ycp:68 -#: library/general/src/data/country_long.ycp:65 +#: library/general/src/data/country.ycp:68 +#: library/general/src/data/country_long.ycp:65 msgid "Greece" msgstr "그리스" -#: library/general/src/data/country.ycp:69 -#: library/general/src/data/country_long.ycp:89 +#: library/general/src/data/country.ycp:69 +#: library/general/src/data/country_long.ycp:89 msgid "Guatemala" msgstr "과테말라" -#: library/general/src/data/country.ycp:70 -#: library/general/src/data/country_long.ycp:72 -#: library/general/src/data/country_long.ycp:159 +#: library/general/src/data/country.ycp:70 +#: library/general/src/data/country_long.ycp:72 +#: library/general/src/data/country_long.ycp:159 msgid "Hong Kong" msgstr "홍콩" -#: library/general/src/data/country.ycp:71 -#: library/general/src/data/country_long.ycp:90 +#: library/general/src/data/country.ycp:71 +#: library/general/src/data/country_long.ycp:90 msgid "Honduras" msgstr "온두라스" -#: library/general/src/data/country.ycp:72 -#: library/general/src/data/country_long.ycp:114 +#: library/general/src/data/country.ycp:72 +#: library/general/src/data/country_long.ycp:114 msgid "Croatia" msgstr "크로아티아" -#: library/general/src/data/country.ycp:73 -#: library/general/src/data/country_long.ycp:115 +#: library/general/src/data/country.ycp:73 +#: library/general/src/data/country_long.ycp:115 msgid "Hungary" msgstr "헝가리" -#: library/general/src/data/country.ycp:74 -#: library/general/src/data/country_long.ycp:116 +#: library/general/src/data/country.ycp:74 +#: library/general/src/data/country_long.ycp:116 msgid "Indonesia" msgstr "인도네시아" -#: library/general/src/data/country.ycp:75 -#: library/general/src/data/country_long.ycp:73 -#: library/general/src/data/country_long.ycp:110 +#: library/general/src/data/country.ycp:75 +#: library/general/src/data/country_long.ycp:73 +#: library/general/src/data/country_long.ycp:110 msgid "Ireland" msgstr "아일랜드" -#: library/general/src/data/country.ycp:76 -#: library/general/src/data/country_long.ycp:113 -#: library/general/src/data/country_long.ycp:120 +#: library/general/src/data/country.ycp:76 +#: library/general/src/data/country_long.ycp:113 +#: library/general/src/data/country_long.ycp:120 msgid "Israel" msgstr "이스라엘" -#: library/general/src/data/country.ycp:77 -#: library/general/src/data/country_long.ycp:37 -#: library/general/src/data/country_long.ycp:74 -#: library/general/src/data/country_long.ycp:148 -#: library/general/src/data/country_long.ycp:149 +#: library/general/src/data/country.ycp:77 +#: library/general/src/data/country_long.ycp:37 +#: library/general/src/data/country_long.ycp:74 +#: library/general/src/data/country_long.ycp:148 +#: library/general/src/data/country_long.ycp:149 msgid "India" msgstr "인도" -#: library/general/src/data/country.ycp:78 -#: library/general/src/data/country_long.ycp:38 +#: library/general/src/data/country.ycp:78 +#: library/general/src/data/country_long.ycp:38 msgid "Iraq" msgstr "이라크" -#: library/general/src/data/country.ycp:79 -#: library/general/src/data/country_long.ycp:117 +#: library/general/src/data/country.ycp:79 +#: library/general/src/data/country_long.ycp:117 msgid "Iceland" msgstr "아이슬란드" -#: library/general/src/data/country.ycp:80 -#: library/general/src/data/country_long.ycp:119 +#: library/general/src/data/country.ycp:80 +#: library/general/src/data/country_long.ycp:119 msgid "Italy" msgstr "이탈리아" -#: library/general/src/data/country.ycp:81 -#: library/general/src/data/country_long.ycp:39 +#: library/general/src/data/country.ycp:81 +#: library/general/src/data/country_long.ycp:39 msgid "Jordan" msgstr "요르단" -#: library/general/src/data/country.ycp:82 +#: library/general/src/data/country.ycp:82 msgid "Japan" msgstr "일본" -#: library/general/src/data/country.ycp:83 -#: library/general/src/data/country_long.ycp:40 +#: library/general/src/data/country.ycp:83 +#: library/general/src/data/country_long.ycp:40 msgid "Kuwait" msgstr "쿠웨이트" -#: library/general/src/data/country.ycp:84 -#: library/general/src/data/country_long.ycp:41 +#: library/general/src/data/country.ycp:84 +#: library/general/src/data/country_long.ycp:41 msgid "Lebanon" msgstr "레바논" -#: library/general/src/data/country.ycp:85 +#: library/general/src/data/country.ycp:85 msgid "Liechtenstein" msgstr "리히텐슈타인" -#: library/general/src/data/country.ycp:86 -#: library/general/src/data/country_long.ycp:124 +#: library/general/src/data/country.ycp:86 +#: library/general/src/data/country_long.ycp:124 msgid "Lithuania" msgstr "리투아니아" -#: library/general/src/data/country.ycp:87 -#: library/general/src/data/country_long.ycp:64 -#: library/general/src/data/country_long.ycp:109 +#: library/general/src/data/country.ycp:87 +#: library/general/src/data/country_long.ycp:64 +#: library/general/src/data/country_long.ycp:109 msgid "Luxemburg" msgstr "룩셈부르크" -#: library/general/src/data/country.ycp:88 -#: library/general/src/data/country_long.ycp:125 +#: library/general/src/data/country.ycp:88 +#: library/general/src/data/country_long.ycp:125 msgid "Latvia" msgstr "라트비아" -#: library/general/src/data/country.ycp:89 -#: library/general/src/data/country_long.ycp:42 +#: library/general/src/data/country.ycp:89 +#: library/general/src/data/country_long.ycp:42 msgid "Libyan Arab Jamahiriya" msgstr "리비아" -#: library/general/src/data/country.ycp:90 -#: library/general/src/data/country_long.ycp:43 +#: library/general/src/data/country.ycp:90 +#: library/general/src/data/country_long.ycp:43 msgid "Morocco" msgstr "모로코" -#: library/general/src/data/country.ycp:91 -#: library/general/src/data/country_long.ycp:127 +#: library/general/src/data/country.ycp:91 +#: library/general/src/data/country_long.ycp:127 msgid "Macedonia" msgstr "마케도니아" -#: library/general/src/data/country.ycp:92 -#: library/general/src/data/country_long.ycp:129 +#: library/general/src/data/country.ycp:92 +#: library/general/src/data/country_long.ycp:129 msgid "Malta" msgstr "몰타" -#: library/general/src/data/country.ycp:93 -#: library/general/src/data/country_long.ycp:91 +#: library/general/src/data/country.ycp:93 +#: library/general/src/data/country_long.ycp:91 msgid "Mexico" msgstr "멕시코" -#: library/general/src/data/country.ycp:94 -#: library/general/src/data/country_long.ycp:128 +#: library/general/src/data/country.ycp:94 +#: library/general/src/data/country_long.ycp:128 msgid "Malaysia" msgstr "말레이시아" -#: library/general/src/data/country.ycp:95 -#: library/general/src/data/country_long.ycp:92 +#: library/general/src/data/country.ycp:95 +#: library/general/src/data/country_long.ycp:92 msgid "Nicaragua" msgstr "니카라구아" -#: library/general/src/data/country.ycp:96 -#: library/general/src/data/country_long.ycp:131 +#: library/general/src/data/country.ycp:96 +#: library/general/src/data/country_long.ycp:131 msgid "Netherlands" msgstr "네덜란드" -#: library/general/src/data/country.ycp:97 -#: library/general/src/data/country_long.ycp:132 -#: library/general/src/data/country_long.ycp:133 +#: library/general/src/data/country.ycp:97 +#: library/general/src/data/country_long.ycp:132 +#: library/general/src/data/country_long.ycp:133 msgid "Norway" msgstr "노르웨이" -#: library/general/src/data/country.ycp:98 -#: library/general/src/data/country_long.ycp:75 -#: library/general/src/data/country_long.ycp:126 +#: library/general/src/data/country.ycp:98 +#: library/general/src/data/country_long.ycp:75 +#: library/general/src/data/country_long.ycp:126 msgid "New Zealand" msgstr "뉴질랜드" -#: library/general/src/data/country.ycp:99 -#: library/general/src/data/country_long.ycp:44 +#: library/general/src/data/country.ycp:99 +#: library/general/src/data/country_long.ycp:44 msgid "Oman" msgstr "오만" -#: library/general/src/data/country.ycp:100 -#: library/general/src/data/country_long.ycp:93 +#: library/general/src/data/country.ycp:100 +#: library/general/src/data/country_long.ycp:93 msgid "Panama" msgstr "파나마" -#: library/general/src/data/country.ycp:101 -#: library/general/src/data/country_long.ycp:94 +#: library/general/src/data/country.ycp:101 +#: library/general/src/data/country_long.ycp:94 msgid "Peru" msgstr "페루" -#: library/general/src/data/country.ycp:102 -#: library/general/src/data/country_long.ycp:76 -#: library/general/src/data/country_long.ycp:152 +#: library/general/src/data/country.ycp:102 +#: library/general/src/data/country_long.ycp:76 +#: library/general/src/data/country_long.ycp:152 msgid "Philippines" msgstr "필리핀" -#: library/general/src/data/country.ycp:103 -#: library/general/src/data/country_long.ycp:155 +#: library/general/src/data/country.ycp:103 +#: library/general/src/data/country_long.ycp:155 msgid "Pakistan" msgstr "파키스탄" -#: library/general/src/data/country.ycp:104 -#: library/general/src/data/country_long.ycp:135 +#: library/general/src/data/country.ycp:104 +#: library/general/src/data/country_long.ycp:135 msgid "Poland" msgstr "폴란드" -#: library/general/src/data/country.ycp:105 -#: library/general/src/data/country_long.ycp:95 +#: library/general/src/data/country.ycp:105 +#: library/general/src/data/country_long.ycp:95 msgid "Puerto Rico" msgstr "푸에르토리코" -#: library/general/src/data/country.ycp:106 -#: library/general/src/data/country_long.ycp:137 +#: library/general/src/data/country.ycp:106 +#: library/general/src/data/country_long.ycp:137 msgid "Portugal" msgstr "포르투갈" -#: library/general/src/data/country.ycp:107 -#: library/general/src/data/country_long.ycp:96 +#: library/general/src/data/country.ycp:107 +#: library/general/src/data/country_long.ycp:96 msgid "Paraguay" msgstr "파라과이" -#: library/general/src/data/country.ycp:108 -#: library/general/src/data/country_long.ycp:45 +#: library/general/src/data/country.ycp:108 +#: library/general/src/data/country_long.ycp:45 msgid "Qatar" msgstr "카타르" -#: library/general/src/data/country.ycp:109 -#: library/general/src/data/country_long.ycp:138 +#: library/general/src/data/country.ycp:109 +#: library/general/src/data/country_long.ycp:138 msgid "Romania" msgstr "루마니아" -#: library/general/src/data/country.ycp:110 -#: library/general/src/data/country_long.ycp:139 +#: library/general/src/data/country.ycp:110 +#: library/general/src/data/country_long.ycp:139 msgid "Russia" msgstr "러시아" -#: library/general/src/data/country.ycp:111 -#: library/general/src/data/country_long.ycp:46 +#: library/general/src/data/country.ycp:111 +#: library/general/src/data/country_long.ycp:46 msgid "Saudi Arabia" msgstr "사우디 아라비아" -#: library/general/src/data/country.ycp:112 -#: library/general/src/data/country_long.ycp:47 +#: library/general/src/data/country.ycp:112 +#: library/general/src/data/country_long.ycp:47 msgid "Sudan" msgstr "수단" -#: library/general/src/data/country.ycp:113 -#: library/general/src/data/country_long.ycp:147 +#: library/general/src/data/country.ycp:113 +#: library/general/src/data/country_long.ycp:147 msgid "Sweden" msgstr "스웨덴" -#: library/general/src/data/country.ycp:114 -#: library/general/src/data/country_long.ycp:77 +#: library/general/src/data/country.ycp:114 +#: library/general/src/data/country_long.ycp:77 msgid "Singapore" msgstr "싱가포르" -#: library/general/src/data/country.ycp:115 -#: library/general/src/data/country_long.ycp:143 +#: library/general/src/data/country.ycp:115 +#: library/general/src/data/country_long.ycp:143 msgid "Slovenia" msgstr "슬로베니아" -#: library/general/src/data/country.ycp:116 -#: library/general/src/data/country_long.ycp:142 +#: library/general/src/data/country.ycp:116 +#: library/general/src/data/country_long.ycp:142 msgid "Slovakia" msgstr "슬로바키아" -#: library/general/src/data/country.ycp:117 +#: library/general/src/data/country.ycp:117 msgid "San Marino" msgstr "산마리노" -#: library/general/src/data/country.ycp:118 -#: library/general/src/data/country_long.ycp:97 +#: library/general/src/data/country.ycp:118 +#: library/general/src/data/country_long.ycp:97 msgid "El Salvador" msgstr "엘살바도르" -#: library/general/src/data/country.ycp:119 -#: library/general/src/data/country_long.ycp:48 +#: library/general/src/data/country.ycp:119 +#: library/general/src/data/country_long.ycp:48 msgid "Syrian Arab Republic" msgstr "시리아" -#: library/general/src/data/country.ycp:120 -#: library/general/src/data/country_long.ycp:151 +#: library/general/src/data/country.ycp:120 +#: library/general/src/data/country_long.ycp:151 msgid "Thailand" msgstr "태국" -#: library/general/src/data/country.ycp:121 -#: library/general/src/data/country_long.ycp:150 +#: library/general/src/data/country.ycp:121 +#: library/general/src/data/country_long.ycp:150 msgid "Tajikistan" msgstr "타지키스탄" -#: library/general/src/data/country.ycp:122 -#: library/general/src/data/country_long.ycp:49 +#: library/general/src/data/country.ycp:122 +#: library/general/src/data/country_long.ycp:49 msgid "Tunisia" msgstr "튀니지" -#: library/general/src/data/country.ycp:123 -#: library/general/src/data/country_long.ycp:153 +#: library/general/src/data/country.ycp:123 +#: library/general/src/data/country_long.ycp:153 msgid "Turkey" msgstr "터키" -#. "TW" : _("Taiwan"), -#: library/general/src/data/country.ycp:125 -#: library/general/src/data/country_long.ycp:140 -#: library/general/src/data/country_long.ycp:154 +#. "TW" : _("Taiwan"), +#: library/general/src/data/country.ycp:125 +#: library/general/src/data/country_long.ycp:140 +#: library/general/src/data/country_long.ycp:154 msgid "Ukraine" msgstr "우크라이나" -#: library/general/src/data/country.ycp:126 -#: library/general/src/data/country_long.ycp:78 -#: library/general/src/data/country_long.ycp:98 -#: library/general/src/data/country_long.ycp:157 +#: library/general/src/data/country.ycp:126 +#: library/general/src/data/country_long.ycp:78 +#: library/general/src/data/country_long.ycp:98 +#: library/general/src/data/country_long.ycp:157 msgid "USA" msgstr "미국" -#: library/general/src/data/country.ycp:127 -#: library/general/src/data/country_long.ycp:99 +#: library/general/src/data/country.ycp:127 +#: library/general/src/data/country_long.ycp:99 msgid "Uruguay" msgstr "우루과이" -#: library/general/src/data/country.ycp:128 -#: library/general/src/data/country_long.ycp:156 +#: library/general/src/data/country.ycp:128 +#: library/general/src/data/country_long.ycp:156 msgid "Uzbekistan" msgstr "우즈베키스탄" -#: library/general/src/data/country.ycp:129 -#: library/general/src/data/country_long.ycp:100 +#: library/general/src/data/country.ycp:129 +#: library/general/src/data/country_long.ycp:100 msgid "Venezuela" msgstr "베네수엘라" -#: library/general/src/data/country.ycp:130 -#: library/general/src/data/country_long.ycp:50 +#: library/general/src/data/country.ycp:130 +#: library/general/src/data/country_long.ycp:50 msgid "Yemen" msgstr "예멘" -#: library/general/src/data/country.ycp:131 -#: library/general/src/data/country_long.ycp:141 -#: library/general/src/data/country_long.ycp:145 +#: library/general/src/data/country.ycp:131 +#: library/general/src/data/country_long.ycp:141 +#: library/general/src/data/country_long.ycp:145 msgid "Yugoslavia" msgstr "유고슬로비아" -#: library/general/src/data/country.ycp:132 -#: library/general/src/data/country_long.ycp:32 -#: library/general/src/data/country_long.ycp:79 +#: library/general/src/data/country.ycp:132 +#: library/general/src/data/country_long.ycp:32 +#: library/general/src/data/country_long.ycp:79 msgid "South Africa" msgstr "남아프리카공화국" -#: library/general/src/data/country.ycp:133 -#: library/general/src/data/country_long.ycp:80 +#: library/general/src/data/country.ycp:133 +#: library/general/src/data/country_long.ycp:80 msgid "Zimbabwe" msgstr "짐바브웨" -#: library/general/src/data/country_long.ycp:160 +#: library/general/src/data/country_long.ycp:160 msgid "Taiwan" msgstr "대만" -#. TRANSLATORS: Popup error message during parameters validation, -#. %1 is a string that should be IPv4 -#: library/network/src/modules/DnsServerAPI.pm:129 +#. TRANSLATORS: Popup error message during parameters validation, +#. %1 is a string that should be IPv4 +#: library/network/src/modules/DnsServerAPI.pm:129 msgid "%1 is not a valid IPv4 address." msgstr "%1은(는) 유효한 IPv4 주소가 아닙니다." -#. TRANSLATORS: Popup error message, Calling function which needs DNS zone name defined -#. TRANSLATORS: Popup error message, Calling function which needs DNS zone defined -#: library/network/src/modules/DnsServerAPI.pm:142 -#: library/network/src/modules/DnsServerAPI.pm:1431 +#. TRANSLATORS: Popup error message, Calling function which needs DNS zone name defined +#. TRANSLATORS: Popup error message, Calling function which needs DNS zone defined +#: library/network/src/modules/DnsServerAPI.pm:142 +#: library/network/src/modules/DnsServerAPI.pm:1431 msgid "The zone name must be defined." msgstr "영역 이름을 정의해야 합니다." -#. TRANSLATORS: Popup error message, Trying to get information from zone which doesn't exist, -#. %1 is the zone name -#: library/network/src/modules/DnsServerAPI.pm:153 +#. TRANSLATORS: Popup error message, Trying to get information from zone which doesn't exist, +#. %1 is the zone name +#: library/network/src/modules/DnsServerAPI.pm:153 msgid "DNS zone %1 does not exist." msgstr "%1 DNS 영역은 존재하지 않습니다." -#. TRANSLATORS: Popup error message, Trying manage records in zone which is not 'master' type -#. only 'master' zone records can be managed -#. %1 is the zone name -#: library/network/src/modules/DnsServerAPI.pm:187 +#. TRANSLATORS: Popup error message, Trying manage records in zone which is not 'master' type +#. only 'master' zone records can be managed +#. %1 is the zone name +#: library/network/src/modules/DnsServerAPI.pm:187 msgid "DNS zone %1 is not type master." msgstr "%1 DNS 영역은 마스터 유형이 아닙니다." -#. TRANSLATORS: Popup error message, Calling function which needs DNS zone type defined -#: library/network/src/modules/DnsServerAPI.pm:197 +#. TRANSLATORS: Popup error message, Calling function which needs DNS zone type defined +#: library/network/src/modules/DnsServerAPI.pm:197 msgid "The zone type must be defined." msgstr "영역 유형을 정의해야 합니다." -#. TRANSLATORS: Popup error message, Calling function with unsupported DNZ zone type, -#. %1 is the zone type -#: library/network/src/modules/DnsServerAPI.pm:204 +#. TRANSLATORS: Popup error message, Calling function with unsupported DNZ zone type, +#. %1 is the zone type +#: library/network/src/modules/DnsServerAPI.pm:204 msgid "Zone type %1 is not supported." msgstr "%1 영역 유형이 지원되지 않습니다." -#. TRANSLATORS: Popup error message, Calling function which needs ACL name defined -#: library/network/src/modules/DnsServerAPI.pm:217 +#. TRANSLATORS: Popup error message, Calling function which needs ACL name defined +#: library/network/src/modules/DnsServerAPI.pm:217 msgid "The ACL name must be defined." msgstr "ACL 이름을 정의해야 합니다." -#. TRANSLATORS: Popup error message, Calling function with unknown ACL, -#. %1 is the ACL's name -#: library/network/src/modules/DnsServerAPI.pm:228 +#. TRANSLATORS: Popup error message, Calling function with unknown ACL, +#. %1 is the ACL's name +#: library/network/src/modules/DnsServerAPI.pm:228 msgid "An ACL named %1 does not exist." msgstr "%1 이름의 ACL은 존재하지 않습니다." -#. TRANSLATORS: Popup error message, Calling function with undefined parameter -#: library/network/src/modules/DnsServerAPI.pm:238 +#. TRANSLATORS: Popup error message, Calling function with undefined parameter +#: library/network/src/modules/DnsServerAPI.pm:238 msgid "The hostname must be defined." msgstr "호스트 이름을 정의해야 합니다." -#. Popup error message, wrong FQDN format -#: library/network/src/modules/DnsServerAPI.pm:250 +#. Popup error message, wrong FQDN format +#: library/network/src/modules/DnsServerAPI.pm:250 msgid "The hostname must be in the fully qualified domain name format." msgstr "호스트 이름은 정규화된 도메인 이름 형식이어야 합니다." -#. Popup error message, FQDN hostname must finish with a dot -#: library/network/src/modules/DnsServerAPI.pm:256 +#. Popup error message, FQDN hostname must finish with a dot +#: library/network/src/modules/DnsServerAPI.pm:256 msgid "The fully qualified hostname must end with a dot." msgstr "정규화된 호스트 이름은 점으로 끝나야 합니다." -#. TRANSLATORS: Popup error message, wrong hostname, allowed syntax is described -#. two lines below using a pre-defined text -#: library/network/src/modules/DnsServerAPI.pm:266 +#. TRANSLATORS: Popup error message, wrong hostname, allowed syntax is described +#. two lines below using a pre-defined text +#: library/network/src/modules/DnsServerAPI.pm:266 msgid "The hostname is invalid." msgstr "호스트 이름이 잘못되었습니다." -#. TRANSLATORS: Popup error message, Checking parameters, MX priority is a needed parameter -#: library/network/src/modules/DnsServerAPI.pm:278 +#. TRANSLATORS: Popup error message, Checking parameters, MX priority is a needed parameter +#: library/network/src/modules/DnsServerAPI.pm:278 msgid "The mail exchange priority must be defined." msgstr "메일 교환 우선순위를 정의해야 합니다." -#. TRANSLATORS: Popup error message, Checking parameters, wrong format -#: library/network/src/modules/DnsServerAPI.pm:284 +#. TRANSLATORS: Popup error message, Checking parameters, wrong format +#: library/network/src/modules/DnsServerAPI.pm:284 msgid "" "The mail exchange priority is invalid.\n" "It must be a number from 0 to 65535.\n" @@ -6001,9 +5890,9 @@ "메일 교환 우선순위가 잘못되었습니다.\n" "값은 0과 65535 사이의 숫자여야 합니다.\n" -#. TRANSLATORS: Popup error message, Wrong hostname which should be part of the zone, -#. %1 is the hostname, %2 is the zone name -#: library/network/src/modules/DnsServerAPI.pm:305 +#. TRANSLATORS: Popup error message, Wrong hostname which should be part of the zone, +#. %1 is the hostname, %2 is the zone name +#: library/network/src/modules/DnsServerAPI.pm:305 msgid "" "The hostname %1 is not part of the zone %2.\n" "\n" @@ -6017,27 +5906,25 @@ "영역 이름과 점으로 끝나야 합니다(예: \n" "'example.org' 영역의 경우 'dhcp1' 또는 'dhcp1.example.org.').\n" -#. TRANSLATORS: Popup error message, Wrong reverse IPv4, -#. %1 is the reveresed IPv4 -#: library/network/src/modules/DnsServerAPI.pm:341 +#. TRANSLATORS: Popup error message, Wrong reverse IPv4, +#. %1 is the reveresed IPv4 +#: library/network/src/modules/DnsServerAPI.pm:341 msgid "" "The reverse IPv4 address %1 is invalid.\n" "\n" "A valid reverse IPv4 consists of four integers in the range 0-255\n" "separated by a dot then followed by the string '.in-addr.arpa.'.\n" -"For example, '1.32.168.192.in-addr.arpa.' for the IPv4 address " -"'192.168.32.1'.\n" +"For example, '1.32.168.192.in-addr.arpa.' for the IPv4 address '192.168.32.1'.\n" msgstr "" "역방향 IPv4 주소 %1이(가) 잘못되었습니다.\n" "\n" "올바른 역방향 IPv4는 0-255 범위의 정수 네 개로 구성되고\n" "각 정수는 점으로 구분되며 '.in-addr.arpa.' 문자열이 점 뒤에 나옵니다.\n" -" 예를 들어 IPv4 주소 '192.168.32.1'의 경우 '1.32.168.192.in-addr.arpa.'가 될 " -"수 있습니다.\n" +" 예를 들어 IPv4 주소 '192.168.32.1'의 경우 '1.32.168.192.in-addr.arpa.'가 될 수 있습니다.\n" -#. TRANSLATORS: Popup error message, user can't use hostname %1 because it doesn't make -#. sense to e relative to zone %2 (%2 is a reverse zone name like '32.200.192.in-addr.arpa') -#: library/network/src/modules/DnsServerAPI.pm:363 +#. TRANSLATORS: Popup error message, user can't use hostname %1 because it doesn't make +#. sense to e relative to zone %2 (%2 is a reverse zone name like '32.200.192.in-addr.arpa') +#: library/network/src/modules/DnsServerAPI.pm:363 msgid "" "The relative hostname %1 cannot be used with zone %2.\n" "Use a fully qualified hostname finished with a dot instead,\n" @@ -6047,8 +5934,8 @@ "없습니다. 대신 'host.example.org.'와 같이 점으로 끝나는\n" "정규화된 호스트 이름을 사용하십시오.\n" -#. Popup error message, Checking MX (Mail eXchange) record format -#: library/network/src/modules/DnsServerAPI.pm:432 +#. Popup error message, Checking MX (Mail eXchange) record format +#: library/network/src/modules/DnsServerAPI.pm:432 msgid "" "Invalid MX record.\n" "Use the format 'priority server-name'.\n" @@ -6056,10 +5943,10 @@ "MX 레코드가 잘못되었습니다.\n" "'우선순위 서버-이름' 형식을 사용하십시오.\n" -#. TRANSLATORS: Popup error message, Checking time value for specific SOA section (key), -#. %1 is the section name, %2 is the minimal value, %3 si the maximal value of the section -#: library/network/src/modules/DnsServerAPI.pm:543 -#: library/network/src/modules/DnsServerAPI.pm:554 +#. TRANSLATORS: Popup error message, Checking time value for specific SOA section (key), +#. %1 is the section name, %2 is the minimal value, %3 si the maximal value of the section +#: library/network/src/modules/DnsServerAPI.pm:543 +#: library/network/src/modules/DnsServerAPI.pm:554 msgid "" "Invalid SOA record.\n" "%1 must be from %2 to %3 seconds.\n" @@ -6067,10 +5954,10 @@ "SOA 레코드가 잘못되었습니다.\n" "%1은(는) %2초에서 %3초 사이여야 합니다.\n" -#. TRANSLATORS: Popup error message, Checking special BIND time format consisting of numbers -#. and defined suffies, also only number (as seconds) is allowed, %1 is a section name -#. like 'ttl' or 'refresh' -#: library/network/src/modules/DnsServerAPI.pm:583 +#. TRANSLATORS: Popup error message, Checking special BIND time format consisting of numbers +#. and defined suffies, also only number (as seconds) is allowed, %1 is a section name +#. like 'ttl' or 'refresh' +#: library/network/src/modules/DnsServerAPI.pm:583 msgid "" "Invalid SOA record.\n" "%1 must be a BIND time type.\n" @@ -6082,12 +5969,11 @@ "%1은(는) BIND 시간 유형이어야 합니다.\n" "BIND 시간 유형은 숫자와 W, D, H, M, S\n" "(대소문자 구분 안 함) 접미사로 구성됩니다. 접미사가 없는 초 단위\n" -"시간도 사용할 수 있습니다. 12H15m, 86400 또는 1W30M과 같은 값을 입력하십시" -"오.\n" +"시간도 사용할 수 있습니다. 12H15m, 86400 또는 1W30M과 같은 값을 입력하십시오.\n" -#. TRANSLATORS: Popup error message, Checking SOA record, -#. %1 is a part of SOA, %2 is typically 0, %3 is some huge number -#: library/network/src/modules/DnsServerAPI.pm:614 +#. TRANSLATORS: Popup error message, Checking SOA record, +#. %1 is a part of SOA, %2 is typically 0, %3 is some huge number +#: library/network/src/modules/DnsServerAPI.pm:614 msgid "" "Invalid SOA record.\n" "%1 must be a number from %2 to %3.\n" @@ -6095,13 +5981,13 @@ "SOA 레코드가 잘못되었습니다.\n" "%1은(는) %2와(과) %3 사이의 숫자여야 합니다.\n" -#. TRANSLATORS: Popup error message, parameters validation, 'filename' is needed parameter -#: library/network/src/modules/DnsServerAPI.pm:1020 +#. TRANSLATORS: Popup error message, parameters validation, 'filename' is needed parameter +#: library/network/src/modules/DnsServerAPI.pm:1020 msgid "The filename must be defined when logging to a file." msgstr "파일에 기록할 경우 파일 이름을 정의해야 합니다." -#. TRANSLATORS: Popup error message, parameters validation, wrongly set file size -#: library/network/src/modules/DnsServerAPI.pm:1028 +#. TRANSLATORS: Popup error message, parameters validation, wrongly set file size +#: library/network/src/modules/DnsServerAPI.pm:1028 msgid "" "Invalid file size.\n" "\n" @@ -6115,18 +6001,18 @@ "\n" "사용할 수 있는 접미사는 k, K, m, M, g 및 G입니다.\n" -#. TRANSLATORS: Popup error message, parameters validation, wrongly set number of versions -#: library/network/src/modules/DnsServerAPI.pm:1041 +#. TRANSLATORS: Popup error message, parameters validation, wrongly set number of versions +#: library/network/src/modules/DnsServerAPI.pm:1041 msgid "The count of file versions must be a number." msgstr "파일 버전 수는 숫자여야 합니다." -#. TRANSLATORS: Popup error message, Trying to get 'master server' for zone which is not 'slave' type, -#. 'master' servers haven't any 'masterservers', they ARE masterservers -#. %1 is name of the zone, %2 is type of the zone -#. TRANSLATORS: Popup error message, Trying to set 'master server' for zone which is not 'slave' type, -#. %1 is name of the zone, %2 is type of the zone -#: library/network/src/modules/DnsServerAPI.pm:1334 -#: library/network/src/modules/DnsServerAPI.pm:1381 +#. TRANSLATORS: Popup error message, Trying to get 'master server' for zone which is not 'slave' type, +#. 'master' servers haven't any 'masterservers', they ARE masterservers +#. %1 is name of the zone, %2 is type of the zone +#. TRANSLATORS: Popup error message, Trying to set 'master server' for zone which is not 'slave' type, +#. %1 is name of the zone, %2 is type of the zone +#: library/network/src/modules/DnsServerAPI.pm:1334 +#: library/network/src/modules/DnsServerAPI.pm:1381 msgid "" "Only slave zones have a master server defined.\n" "Zone %1 is type %2.\n" @@ -6134,25 +6020,25 @@ "슬레이브 영역만 정의된 마스터 서버를 가질 수 있습니다.\n" "%1 영역은 %2 유형입니다.\n" -#. TRANSLATORS: Popup error message, Trying to add new zone which already exists -#: library/network/src/modules/DnsServerAPI.pm:1440 +#. TRANSLATORS: Popup error message, Trying to add new zone which already exists +#: library/network/src/modules/DnsServerAPI.pm:1440 msgid "Zone name %1 already exists." msgstr "%1 영역 이름이 이미 존재합니다." -#. TRANSLATORS: Popup error message, Adding new 'slave' zone without defined needed option 'masterserver' -#: library/network/src/modules/DnsServerAPI.pm:1449 +#. TRANSLATORS: Popup error message, Adding new 'slave' zone without defined needed option 'masterserver' +#: library/network/src/modules/DnsServerAPI.pm:1449 msgid "Option masterserver is needed for slave zones." msgstr "슬레이브 영역에는 masterserver 옵션이 필요합니다." -#. TRANSLATORS: Popup error message -#: library/network/src/modules/DnsServerAPI.pm:2531 -#: library/network/src/modules/DnsServerAPI.pm:2581 +#. TRANSLATORS: Popup error message +#: library/network/src/modules/DnsServerAPI.pm:2531 +#: library/network/src/modules/DnsServerAPI.pm:2581 msgid "Host's IP cannot be empty." msgstr "호스트의 IP는 비워둘 수 없습니다." -#. TRANSLATORS: Popup error message, No reverse zone for %1 record found, -#. %2 is the hostname, %1 is the IPv4 -#: library/network/src/modules/DnsServerAPI.pm:2539 +#. TRANSLATORS: Popup error message, No reverse zone for %1 record found, +#. %2 is the hostname, %1 is the IPv4 +#: library/network/src/modules/DnsServerAPI.pm:2539 msgid "" "There is no reverse zone for %1 administered by your DNS server.\n" "Hostname %2 cannot be added." Modified: branches/SLE12-SP3/yast/ko/po/bootloader.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/bootloader.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/bootloader.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,89 +14,81 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. command line help text for Bootloader module -#: src/clients/bootloader.rb:32 +#. command line help text for Bootloader module +#: src/clients/bootloader.rb:32 msgid "Boot loader configuration module" msgstr "부팅 로더 구성 모듈입니다." -#. Dialog for whole bootloader configuration -#. focus proposing new one -#: src/lib/bootloader/config_dialog.rb:23 src/modules/Bootloader.rb:169 +#. Dialog for whole bootloader configuration +#. focus proposing new one +#: src/lib/bootloader/config_dialog.rb:23 src/modules/Bootloader.rb:169 msgid "Broken Configuration" msgstr "잘못된 구성" -#. TRANSLATORS: %s stands for readon why yast cannot process it -#. TRANSLATORS: %s stands for readon why yast cannot process it -#: src/lib/bootloader/config_dialog.rb:25 src/modules/Bootloader.rb:171 -msgid "" -"YaST cannot process current bootloader configuration (%s). Propose new " -"configuration from scratch?" -msgstr "" -"YaST에서 현재 부트로더 구성(%s)을 처리할 수 없습니다. 새로운 구성을 처음부터 " -"제안합니까?" +#. TRANSLATORS: %s stands for readon why yast cannot process it +#. TRANSLATORS: %s stands for readon why yast cannot process it +#: src/lib/bootloader/config_dialog.rb:25 src/modules/Bootloader.rb:171 +msgid "YaST cannot process current bootloader configuration (%s). Propose new configuration from scratch?" +msgstr "YaST에서 현재 부트로더 구성(%s)을 처리할 수 없습니다. 새로운 구성을 처음부터 제안합니까?" -#: src/lib/bootloader/config_dialog.rb:27 src/modules/Bootloader.rb:173 +#: src/lib/bootloader/config_dialog.rb:27 src/modules/Bootloader.rb:173 msgid "Propose" msgstr "제안" -#: src/lib/bootloader/config_dialog.rb:28 src/modules/Bootloader.rb:162 -#: src/modules/Bootloader.rb:174 +#: src/lib/bootloader/config_dialog.rb:28 src/modules/Bootloader.rb:162 +#: src/modules/Bootloader.rb:174 msgid "Quit" msgstr "끝내기" -#. F#300779 - Install diskless client (NFS-root) -#. additional warning that root partition is nfs type -> bootloader will not be installed -#. kokso: additional warning that root partition is nfs type -> bootloader will not be installed -#: src/lib/bootloader/config_dialog.rb:51 src/modules/Bootloader.rb:222 +#. F#300779 - Install diskless client (NFS-root) +#. additional warning that root partition is nfs type -> bootloader will not be installed +#. kokso: additional warning that root partition is nfs type -> bootloader will not be installed +#: src/lib/bootloader/config_dialog.rb:51 src/modules/Bootloader.rb:222 msgid "The boot partition is of type NFS. Bootloader cannot be installed." msgstr "NFS 유형의 부트 파티션입니다. 부트 로더를 설치할 수 없습니다." -#. F#300779: end -#: src/lib/bootloader/config_dialog.rb:69 +#. F#300779: end +#: src/lib/bootloader/config_dialog.rb:69 msgid "Boot Loader Settings" msgstr "부트 로더 설정" -#. Represents dialog for modification of device map -#: src/lib/bootloader/device_map_dialog.rb:56 +#. Represents dialog for modification of device map +#: src/lib/bootloader/device_map_dialog.rb:56 msgid "Device map must contain at least one device" msgstr "장치 맵은 최소한 하나의 장치를 포함해야 함" -#. we just go back to original dialog -#: src/lib/bootloader/device_map_dialog.rb:108 +#. we just go back to original dialog +#: src/lib/bootloader/device_map_dialog.rb:108 msgid "Disk order settings" msgstr "디스크 순서 설정" -#: src/lib/bootloader/device_map_dialog.rb:113 +#: src/lib/bootloader/device_map_dialog.rb:113 msgid "D&isks" msgstr "디스크(&I)" -#. textentry header -#: src/lib/bootloader/device_map_dialog.rb:157 +#. textentry header +#: src/lib/bootloader/device_map_dialog.rb:157 msgid "&Device" msgstr "장치(&D)" -#. TRANSLATORS: %s stands for partition -#: src/lib/bootloader/disk_change_detector.rb:29 +#. TRANSLATORS: %s stands for partition +#: src/lib/bootloader/disk_change_detector.rb:29 msgid "Selected bootloader partition %s is not available any more." msgstr "선택한 부트 로더 파티션 %s은(는) 더 이상 사용할 수 없습니다." -#. TRANSLATORS: %s is translated description of error -#: src/lib/bootloader/exceptions.rb:24 -msgid "" -"Error reading the bootloader configuration files. Please use YaST2 " -"bootloader to fix it. Details: %s" -msgstr "" -"부트로더 구성 파일을 읽는 중 오류가 발생했습니다. 해결하려면 YaST2 부트로더" -"를 사용하십시오. 세부 사항: %s" +#. TRANSLATORS: %s is translated description of error +#: src/lib/bootloader/exceptions.rb:24 +msgid "Error reading the bootloader configuration files. Please use YaST2 bootloader to fix it. Details: %s" +msgstr "부트로더 구성 파일을 읽는 중 오류가 발생했습니다. 해결하려면 YaST2 부트로더를 사용하십시오. 세부 사항: %s" -#. Finish client for bootloader configuration -#: src/lib/bootloader/finish_client.rb:25 +#. Finish client for bootloader configuration +#: src/lib/bootloader/finish_client.rb:25 msgid "Saving bootloader configuration..." msgstr "부트 로더 구성 저장중..." -#. TRANSLATORS: reboot message -#. %1 is replaced with additional message from reIPL -#: src/lib/bootloader/finish_client.rb:102 +#. TRANSLATORS: reboot message +#. %1 is replaced with additional message from reIPL +#: src/lib/bootloader/finish_client.rb:102 msgid "" "\n" "Your system will now shut down.%1\n" @@ -108,38 +100,38 @@ "자세한 내용은 설명서에서 관련 장을 \n" "참조하십시오. \n" -#. Final message after all packages from CD1 are installed -#. and we're ready to start (boot into) the installed system -#. Message that will be displayed along with information -#. how the boot loader was installed -#: src/lib/bootloader/finish_client.rb:115 +#. Final message after all packages from CD1 are installed +#. and we're ready to start (boot into) the installed system +#. Message that will be displayed along with information +#. how the boot loader was installed +#: src/lib/bootloader/finish_client.rb:115 msgid "The system will reboot now..." msgstr "이제 시스템이 재부팅됩니다..." -#. Widget to switch between all supported bootloaders -#: src/lib/bootloader/generic_widgets.rb:20 +#. Widget to switch between all supported bootloaders +#: src/lib/bootloader/generic_widgets.rb:20 msgid "&Boot Loader" msgstr "부트 로더(&B)" -#: src/lib/bootloader/generic_widgets.rb:39 +#: src/lib/bootloader/generic_widgets.rb:39 msgid "GRUB2" msgstr "GRUB2" -#: src/lib/bootloader/generic_widgets.rb:40 +#: src/lib/bootloader/generic_widgets.rb:40 msgid "GRUB2 for EFI" msgstr "EFI에 대한 GRUB2" -#. Translators: option in combo box when bootloader is not managed by yast2 -#: src/lib/bootloader/generic_widgets.rb:42 +#. Translators: option in combo box when bootloader is not managed by yast2 +#: src/lib/bootloader/generic_widgets.rb:42 msgid "Not Managed" msgstr "관리 안 됨" -#: src/lib/bootloader/generic_widgets.rb:43 +#: src/lib/bootloader/generic_widgets.rb:43 msgid "Default" msgstr "기본값" -#. popup - Continue/Cancel -#: src/lib/bootloader/generic_widgets.rb:57 +#. popup - Continue/Cancel +#: src/lib/bootloader/generic_widgets.rb:57 msgid "" "\n" "If you do not install any boot loader, the system\n" @@ -153,7 +145,7 @@ " \n" " 계속하시겠습니까?\n" -#: src/lib/bootloader/generic_widgets.rb:75 +#: src/lib/bootloader/generic_widgets.rb:75 msgid "" "<p><b>Boot Loader Type</b><br>\n" "To select whether to install a boot loader and which bootloader to install,\n" @@ -163,234 +155,195 @@ "부트 로더 설치 및 설치할 부트 로더를 선택하려면\n" "<b>부트 로더</b>를 사용하십시오.</p>" -#. Display bootloader summary -#. @return a list of summary lines -#. Display bootloader summary -#. @return a list of summary lines -#: src/lib/bootloader/grub2.rb:106 src/lib/bootloader/grub2efi.rb:76 +#. Display bootloader summary +#. @return a list of summary lines +#. Display bootloader summary +#. @return a list of summary lines +#: src/lib/bootloader/grub2.rb:106 src/lib/bootloader/grub2efi.rb:76 msgid "Boot Loader Type: %1" msgstr "부트 로더 유형: %1" -#: src/lib/bootloader/grub2.rb:110 +#: src/lib/bootloader/grub2.rb:110 msgid "Enable Trusted Boot: %1" msgstr "트러스트된 부트 활성화: %1" -#: src/lib/bootloader/grub2.rb:111 src/lib/bootloader/grub2efi.rb:81 +#: src/lib/bootloader/grub2.rb:111 src/lib/bootloader/grub2efi.rb:81 msgid "yes" msgstr "예" -#: src/lib/bootloader/grub2.rb:111 src/lib/bootloader/grub2efi.rb:81 +#: src/lib/bootloader/grub2.rb:111 src/lib/bootloader/grub2efi.rb:81 msgid "no" msgstr "아니오" -#: src/lib/bootloader/grub2.rb:117 +#: src/lib/bootloader/grub2.rb:117 msgid "Status Location: %1" msgstr "위치 상태: %1" -#. part of summary, %1 is a list of hard disks device names -#: src/lib/bootloader/grub2.rb:181 +#. part of summary, %1 is a list of hard disks device names +#: src/lib/bootloader/grub2.rb:181 msgid "Order of Hard Disks: %1" msgstr "하드 디스크 순서: %1" -#. TRANSLATORS: extended is here for extended partition. Keep translation short. -#: src/lib/bootloader/grub2.rb:193 +#. TRANSLATORS: extended is here for extended partition. Keep translation short. +#: src/lib/bootloader/grub2.rb:193 msgid " (extended)" msgstr " (extended)" -#. TRANSLATORS: MBR is acronym for Master Boot Record, if nothing locally specific -#. is used in your language, then keep it as it is. -#: src/lib/bootloader/grub2.rb:198 +#. TRANSLATORS: MBR is acronym for Master Boot Record, if nothing locally specific +#. is used in your language, then keep it as it is. +#: src/lib/bootloader/grub2.rb:198 msgid " (MBR)" msgstr " (MBR)" -#: src/lib/bootloader/grub2.rb:219 -msgid "" -"Install bootcode into MBR (do not install</a>)" +#: src/lib/bootloader/grub2.rb:219 +msgid "Install bootcode into MBR (do not install</a>)" msgstr "MBR에 부트 코드 설치(설치 안 함</a>)" -#: src/lib/bootloader/grub2.rb:223 -msgid "" -"Do not install bootcode into MBR (install</a>)" +#: src/lib/bootloader/grub2.rb:223 +msgid "Do not install bootcode into MBR (install</a>)" msgstr "MBR에 부트 코드 설치 안 함(설치</a>)" -#. check for separated boot partition, use root otherwise -#: src/lib/bootloader/grub2.rb:233 -msgid "" -"Install bootcode into /boot partition (do not " -"install</a>)" -msgstr "" -"/boot 파티션에 부트 코드 설치(설치 안 함</a>)" +#. check for separated boot partition, use root otherwise +#: src/lib/bootloader/grub2.rb:233 +msgid "Install bootcode into /boot partition (do not install</a>)" +msgstr "/boot 파티션에 부트 코드 설치(설치 안 함</a>)" -#: src/lib/bootloader/grub2.rb:238 -msgid "" -"Do not install bootcode into /boot partition (install</a>)" -msgstr "" -"/boot 파티션에 부트 코드 설치 안 함(설치</a>)" +#: src/lib/bootloader/grub2.rb:238 +msgid "Do not install bootcode into /boot partition (install</a>)" +msgstr "/boot 파티션에 부트 코드 설치 안 함(설치</a>)" -#: src/lib/bootloader/grub2.rb:244 -msgid "" -"Install bootcode into \"/\" partition (do not " -"install</a>)" -msgstr "" -"\"/\" 파티션에 부트 코드 설치(설치 안 함</a>)" +#: src/lib/bootloader/grub2.rb:244 +msgid "Install bootcode into \"/\" partition (do not install</a>)" +msgstr "\"/\" 파티션에 부트 코드 설치(설치 안 함</a>)" -#: src/lib/bootloader/grub2.rb:249 -msgid "" -"Do not install bootcode into \"/\" partition (install</a>)" -msgstr "" -"\"/\" 파티션에 부트 코드 설치 안 함(설치</a>)" +#: src/lib/bootloader/grub2.rb:249 +msgid "Do not install bootcode into \"/\" partition (install</a>)" +msgstr "\"/\" 파티션에 부트 코드 설치 안 함(설치</a>)" -#. no location chosen, so warn user that it is problem unless he is sure -#: src/lib/bootloader/grub2.rb:274 -msgid "" -"Warning: No location for bootloader stage1 selected.Unless you know what you " -"are doing please select above location." -msgstr "" -"경고: 선택한 부트 로드 단계 1의 위치가 없습니다. 현재 수행 중인 작업을 정확" -"히 모를 경우 위 위치를 선택하십시오." +#. no location chosen, so warn user that it is problem unless he is sure +#: src/lib/bootloader/grub2.rb:274 +msgid "Warning: No location for bootloader stage1 selected.Unless you know what you are doing please select above location." +msgstr "경고: 선택한 부트 로드 단계 1의 위치가 없습니다. 현재 수행 중인 작업을 정확히 모를 경우 위 위치를 선택하십시오." -#. TRANSLATORS: title for list of location proposals -#: src/lib/bootloader/grub2.rb:282 +#. TRANSLATORS: title for list of location proposals +#: src/lib/bootloader/grub2.rb:282 msgid "Change Location: %s" msgstr "위치 변경: %s" -#. Represents bootloader timeout value -#: src/lib/bootloader/grub2_widgets.rb:56 +#. Represents bootloader timeout value +#: src/lib/bootloader/grub2_widgets.rb:56 msgid "&Timeout in Seconds" msgstr "제한 시간(초)(&T)" -#: src/lib/bootloader/grub2_widgets.rb:60 +#: src/lib/bootloader/grub2_widgets.rb:60 msgid "" "<p><b>Timeout in Seconds</b><br>\n" -"Specifies the time the bootloader will wait until the default kernel is " -"loaded.</p>\n" +"Specifies the time the bootloader will wait until the default kernel is loaded.</p>\n" msgstr "" "<p><b>제한 시간(초)</b><br>\n" "기본 커널이 로드될 때까지 부트 로더가 대기하는 시간을 지정합니다.</p>\n" -#. Represents decision if bootloader need activated partition -#: src/lib/bootloader/grub2_widgets.rb:92 +#. Represents decision if bootloader need activated partition +#: src/lib/bootloader/grub2_widgets.rb:92 msgid "Set &active Flag in Partition Table for Boot Partition" msgstr "부트 파티션에 대한 파티션 테이블에서 플래그 활성 설정(&A)" -#: src/lib/bootloader/grub2_widgets.rb:96 +#: src/lib/bootloader/grub2_widgets.rb:96 msgid "" "<p><b>Set active Flag in Partition Table for Boot Partition</b><br>\n" -"To activate the partition which contains the boot loader. The generic MBR " -"code will then\n" -"boot the active partition. Older BIOSes require one partition to be active " -"even\n" +"To activate the partition which contains the boot loader. The generic MBR code will then\n" +"boot the active partition. Older BIOSes require one partition to be active even\n" "if the boot loader is installed in the MBR.</p>" msgstr "" "<p><b>파티션 테이블에서 부트 파티션에 대한 활성 플래그 설정</b><br>\n" -"부트 로더가 포함되어 있는 파티션을 활성화합니다. 그러면 일반 MBR 코드가 활" -"성\n" +"부트 로더가 포함되어 있는 파티션을 활성화합니다. 그러면 일반 MBR 코드가 활성\n" "파티션을 부팅하게 됩니다. 이전 BIOS의 경우 MBR에 부트 로더가 설치되어\n" "있더라도 하나의 파티션을 활성화해야 합니다.</p>" -#. Represents decision if generic MBR have to be installed on disk -#: src/lib/bootloader/grub2_widgets.rb:123 +#. Represents decision if generic MBR have to be installed on disk +#: src/lib/bootloader/grub2_widgets.rb:123 msgid "Write &generic Boot Code to MBR" msgstr "MBR에 일반 부트 코드 쓰기(&G)" -#: src/lib/bootloader/grub2_widgets.rb:127 +#: src/lib/bootloader/grub2_widgets.rb:127 msgid "" -"<p><b>Write generic Boot Code to MBR</b> replace the master boot record of " -"your disk with generic code (OS independent code which\n" +"<p><b>Write generic Boot Code to MBR</b> replace the master boot record of your disk with generic code (OS independent code which\n" "boots the active partition).</p>" msgstr "" -"<p><b>MBR에 일반 부트 코드 쓰기</b><br> 디스크의 마스터 부트 레코드를 일반 코" -"드로 대체(활성 파티션을 부팅하는\n" +"<p><b>MBR에 일반 부트 코드 쓰기</b><br> 디스크의 마스터 부트 레코드를 일반 코드로 대체(활성 파티션을 부팅하는\n" "OS 독립 코드)</p>" -#. Represents decision if menu should be hidden or visible -#: src/lib/bootloader/grub2_widgets.rb:152 +#. Represents decision if menu should be hidden or visible +#: src/lib/bootloader/grub2_widgets.rb:152 msgid "&Hide Menu on Boot" msgstr "부팅 시 메뉴 숨기기(&H)" -#: src/lib/bootloader/grub2_widgets.rb:156 +#: src/lib/bootloader/grub2_widgets.rb:156 msgid "<p>Selecting <b>Hide Menu on Boot</b> will hide the boot menu.</p>" -msgstr "" -"<p><b>부팅 시 메뉴 숨기기</b>를 선택하면 부트 메뉴가 표시되지 않습니다.</p>" +msgstr "<p><b>부팅 시 메뉴 숨기기</b>를 선택하면 부트 메뉴가 표시되지 않습니다.</p>" -#. Represents if os prober should be run -#: src/lib/bootloader/grub2_widgets.rb:175 +#. Represents if os prober should be run +#: src/lib/bootloader/grub2_widgets.rb:175 msgid "Pro&be Foreign OS" msgstr "외부 OS 검사(&B)" -#: src/lib/bootloader/grub2_widgets.rb:179 -msgid "" -"<p><b>Probe Foreign OS</b> by means of os-prober for multiboot with other " -"foreign distribution </p>" -msgstr "" -"<p><b>외부 OS 검사</b>는 다른 외부 배포를 사용한 다중 부팅을 위해 os-prober" -"를 통해 수행됩니다. </p>" +#: src/lib/bootloader/grub2_widgets.rb:179 +msgid "<p><b>Probe Foreign OS</b> by means of os-prober for multiboot with other foreign distribution </p>" +msgstr "<p><b>외부 OS 검사</b>는 다른 외부 배포를 사용한 다중 부팅을 위해 os-prober를 통해 수행됩니다. </p>" -#. represents kernel command line -#: src/lib/bootloader/grub2_widgets.rb:203 +#. represents kernel command line +#: src/lib/bootloader/grub2_widgets.rb:203 msgid "O&ptional Kernel Command Line Parameter" msgstr "선택적 커널 명령줄 파라미터(&P)" -#: src/lib/bootloader/grub2_widgets.rb:207 -msgid "" -"<p><b>Optional Kernel Command Line Parameter</b> lets you define additional " -"parameters to pass to the kernel.</p>" -msgstr "" -"<p><b>선택적 커널 명령줄 매개 변수</b>를 사용하면 커널에 전달할 추가 매개 변" -"수를 정의할 수 있습니다.</p>" +#: src/lib/bootloader/grub2_widgets.rb:207 +msgid "<p><b>Optional Kernel Command Line Parameter</b> lets you define additional parameters to pass to the kernel.</p>" +msgstr "<p><b>선택적 커널 명령줄 매개 변수</b>를 사용하면 커널에 전달할 추가 매개 변수를 정의할 수 있습니다.</p>" -#. Represents Protective MBR action -#: src/lib/bootloader/grub2_widgets.rb:231 +#. Represents Protective MBR action +#: src/lib/bootloader/grub2_widgets.rb:231 msgid "&Protective MBR flag" msgstr "보호 MBR 플래그(&P)" -#: src/lib/bootloader/grub2_widgets.rb:235 -msgid "" -"<p><b>Protective MBR flag</b> is expert only settings, that is needed only " -"on exotic hardware. For details see Protective MBR in GPT disks. Do not " -"touch if you are not sure.</p>" -msgstr "" -"<p><b>보호 MBR 플래그</b>는 신형 하드웨어에만 필요한 전문가 전용 설정입니다. " -"자세한 내용은 GPT 디스크의 보호 MBR을 참조하십시오. 확실하지 않으면 손대지 마" -"십시오.</p>" +#: src/lib/bootloader/grub2_widgets.rb:235 +msgid "<p><b>Protective MBR flag</b> is expert only settings, that is needed only on exotic hardware. For details see Protective MBR in GPT disks. Do not touch if you are not sure.</p>" +msgstr "<p><b>보호 MBR 플래그</b>는 신형 하드웨어에만 필요한 전문가 전용 설정입니다. 자세한 내용은 GPT 디스크의 보호 MBR을 참조하십시오. 확실하지 않으면 손대지 마십시오.</p>" -#. TRANSLATORS: set flag on disk -#: src/lib/bootloader/grub2_widgets.rb:249 +#. TRANSLATORS: set flag on disk +#: src/lib/bootloader/grub2_widgets.rb:249 msgid "set" msgstr "설정" -#. TRANSLATORS: remove flag from disk -#: src/lib/bootloader/grub2_widgets.rb:251 +#. TRANSLATORS: remove flag from disk +#: src/lib/bootloader/grub2_widgets.rb:251 msgid "remove" msgstr "제거" -#. TRANSLATORS: do not change flag on disk -#. force re-calculation of bootloader proposal -#. this deletes any internally cached values, a new proposal will -#. not be partially based on old data now any more -#: src/lib/bootloader/grub2_widgets.rb:253 -#: src/lib/bootloader/proposal_client.rb:50 +#. TRANSLATORS: do not change flag on disk +#. force re-calculation of bootloader proposal +#. this deletes any internally cached values, a new proposal will +#. not be partially based on old data now any more +#: src/lib/bootloader/grub2_widgets.rb:253 +#: src/lib/bootloader/proposal_client.rb:50 msgid "do not change" msgstr "변경하지 않음" -#. Represents switcher for secure boot on EFI -#: src/lib/bootloader/grub2_widgets.rb:271 +#. Represents switcher for secure boot on EFI +#: src/lib/bootloader/grub2_widgets.rb:271 msgid "Enable &Secure Boot Support" msgstr "보안 부트 지원 활성화(&S)" -#: src/lib/bootloader/grub2_widgets.rb:275 +#: src/lib/bootloader/grub2_widgets.rb:275 msgid "Tick to enable UEFI Secure Boot\n" msgstr "선택하여 UEFI 보안 부트 활성화\n" -#. Represents switcher for Trusted Boot -#: src/lib/bootloader/grub2_widgets.rb:296 +#. Represents switcher for Trusted Boot +#: src/lib/bootloader/grub2_widgets.rb:296 msgid "Enable &Trusted Boot Support" msgstr "트러스트된 부트 지원 활성화(&T)" -#. TRANSLATORS: TrustedGRUB2 is a name, don't translate it -#: src/lib/bootloader/grub2_widgets.rb:301 +#. TRANSLATORS: TrustedGRUB2 is a name, don't translate it +#: src/lib/bootloader/grub2_widgets.rb:301 msgid "" "<p><b>Trusted Boot</b> will install TrustedGRUB2\n" "instead of regular GRUB2.</p>\n" @@ -406,13 +359,12 @@ "부팅 프로세스 무결성을 측정합니다(TPM, Trusted Platform Module,\n" "칩).</p>\n" "<p>먼저 BIOS 설정에서\n" -"신뢰할 수 있는 부팅이 활성화되어 있는지 확인해야 합니다(설정 이름이 다를 수 " -"있음, 예: Security Chip).</p>\n" +"신뢰할 수 있는 부팅이 활성화되어 있는지 확인해야 합니다(설정 이름이 다를 수 있음, 예: Security Chip).</p>\n" -#. check for file size does not work, since FS reports it 4096 -#. even if the file is in fact empty and a single byte cannot -#. be read, therefore testing real reading (details: bsc#994556) -#: src/lib/bootloader/grub2_widgets.rb:327 +#. check for file size does not work, since FS reports it 4096 +#. even if the file is in fact empty and a single byte cannot +#. be read, therefore testing real reading (details: bsc#994556) +#: src/lib/bootloader/grub2_widgets.rb:327 msgid "" "Trusted Platform Module not found.\n" "Make sure it is enabled in BIOS.\n" @@ -422,31 +374,31 @@ "BIOS에서 활성화되어 있는지 확인하십시오.\n" "그렇지 않으면 시스템이 부팅되지 않습니다." -#. Represents grub password protection widget -#: src/lib/bootloader/grub2_widgets.rb:347 +#. Represents grub password protection widget +#: src/lib/bootloader/grub2_widgets.rb:347 msgid "Prot&ect Boot Loader with Password" msgstr "비밀번호로 부트 로더 보호(&E)" -#. TRANSLATORS: checkbox entry -#: src/lib/bootloader/grub2_widgets.rb:353 +#. TRANSLATORS: checkbox entry +#: src/lib/bootloader/grub2_widgets.rb:353 msgid "P&rotect Entry Modification Only" msgstr "엔트리 수정만 보호(&R)" -#. TRANSLATORS: text entry, please keep it short -#: src/lib/bootloader/grub2_widgets.rb:359 +#. TRANSLATORS: text entry, please keep it short +#: src/lib/bootloader/grub2_widgets.rb:359 msgid "&Password for GRUB2 User 'root'" msgstr "'루트' GRUB2 사용자에 대한 비밀번호(&P)" -#. text entry -#: src/lib/bootloader/grub2_widgets.rb:362 +#. text entry +#: src/lib/bootloader/grub2_widgets.rb:362 msgid "Re&type Password" msgstr "비밀번호 재입력(&T)" -#: src/lib/bootloader/grub2_widgets.rb:373 +#: src/lib/bootloader/grub2_widgets.rb:373 msgid "The password must not be empty." msgstr "비밀번호는 생략할 수 없습니다." -#: src/lib/bootloader/grub2_widgets.rb:380 +#: src/lib/bootloader/grub2_widgets.rb:380 msgid "" "'Password' and 'Retype password'\n" "do not match. Retype the password." @@ -454,58 +406,31 @@ "'비밀번호'와 '비밀번호 재입력'\n" "의 값이 일치하지 않습니다. 비밀번호를 다시 입력하십시오." -#. special value as we do not know password, so it mean user do not change it -#: src/lib/bootloader/grub2_widgets.rb:433 +#. special value as we do not know password, so it mean user do not change it +#: src/lib/bootloader/grub2_widgets.rb:433 msgid "" "<p><b>Protect Boot Loader with Password</b><br>\n" -"At boot time, modifying or even booting any entry will require the password. " -"If <b>Protect Entry Modification Only</b> is checked then booting any entry " -"is not restricted but modifying entries requires the password (which is the " -"way GRUB 1 behaved). As side-effect of this option, rd.shell=0 is added to " -"kernel parameters, to prevent an unauthorized access to the initrd shell." -"<br>YaST will only accept the password if you repeat it in <b>Retype " -"Password</b>. The password applies to the GRUB2 user 'root' which is " -"distinct from the Linux 'root'. YaST currently does not supportother GRUB2 " -"users. If you need them, use a separate GRUB2 script.</p>" +"At boot time, modifying or even booting any entry will require the password. If <b>Protect Entry Modification Only</b> is checked then booting any entry is not restricted but modifying entries requires the password (which is the way GRUB 1 behaved). As side-effect of this option, rd.shell=0 is added to kernel parameters, to prevent an unauthorized access to the initrd shell.<br>YaST will only accept the password if you repeat it in <b>Retype Password</b>. The password applies to the GRUB2 user 'root' which is distinct from the Linux 'root'. YaST currently does not supportother GRUB2 users. If you need them, use a separate GRUB2 script.</p>" msgstr "" "<p><b>비밀번호로 부트로더 보호</b><br>\n" -"부팅 시 엔트리를 수정하거나 부팅하려면 비밀번호가 필요합니다. <b>엔트리 수정" -"만 보호</b>가 선택된 상태이면 엔트리 부팅은 제한되지 않으나 엔트리 수정 시 비" -"밀번호가 필요합니다(GRUB 1 동작 방식과 동일). 이 옵션의 부작용으로 rd.shell=0" -"이 커널 파라미터에 추가되어 initrd 셸에 대한 무단 액세스를 방지합니다." -"<br>YaST에서는 <b>비밀번호 재입력</b>에 다시 입력한 비밀번호만 승인합니다. " -"이 비밀번호는 Linux 'root'와 구분되는 GRUB2 사용자 'root'에 적용됩니다. YaST" -"는 현재 다른 GRUB2 사용자를 지원하지 않습니다. 필요한 경우 별도의 GRUB2 스크" -"립트를 사용하십시오.</p>" +"부팅 시 엔트리를 수정하거나 부팅하려면 비밀번호가 필요합니다. <b>엔트리 수정만 보호</b>가 선택된 상태이면 엔트리 부팅은 제한되지 않으나 엔트리 수정 시 비밀번호가 필요합니다(GRUB 1 동작 방식과 동일). 이 옵션의 부작용으로 rd.shell=0이 커널 파라미터에 추가되어 initrd 셸에 대한 무단 액세스를 방지합니다.<br>YaST에서는 <b>비밀번호 재입력</b>에 다시 입력한 비밀번호만 승인합니다. 이 비밀번호는 Linux 'root'와 구분되는 GRUB2 사용자 'root'에 적용됩니다. YaST는 현재 다른 GRUB2 사용자를 지원하지 않습니다. 필요한 경우 별도의 GRUB2 스크립트를 사용하십시오.</p>" -#. Translators: do not translate the quoted parts like "unit" -#: src/lib/bootloader/grub2_widgets.rb:466 +#. Translators: do not translate the quoted parts like "unit" +#: src/lib/bootloader/grub2_widgets.rb:466 msgid "" -"<p>When a graphical console is used it allows to use various display " -"resolutions. The <tt>auto</tt> option tries to find the best one when " -"booting starts.</p>\n" -"<p>When a serial console is used the boot output will be printed to a serial " -"device like <tt>ttyS0</tt>. At least the <tt>--unit</tt> option has to be " -"specified, and the complete syntax is <tt>%s</tt>. Other parts are optional " -"and if not set, a default is used. <tt>NUM</tt> in commands stands for a " -"positive number like 8. Example parameters are <tt>serial --speed=38400 --" -"unit=0</tt>.</p>" +"<p>When a graphical console is used it allows to use various display resolutions. The <tt>auto</tt> option tries to find the best one when booting starts.</p>\n" +"<p>When a serial console is used the boot output will be printed to a serial device like <tt>ttyS0</tt>. At least the <tt>--unit</tt> option has to be specified, and the complete syntax is <tt>%s</tt>. Other parts are optional and if not set, a default is used. <tt>NUM</tt> in commands stands for a positive number like 8. Example parameters are <tt>serial --speed=38400 --unit=0</tt>.</p>" msgstr "" -"<p>그래픽 콘솔을 사용할 경우 다양한 디스플레이 해상도를 사용할 수 있습니다. " -"<tt>자동</tt> 옵션은 부팅 시 최적의 해상도를 찾습니다.</p>\n" -"<p>시리얼 콘솔을 사용할 경우 부팅 출력이 <tt>ttyS0</tt>과 같은 시리얼 기기에 " -"인쇄됩니다. 최소한 <tt>--unit</tt> 옵션을 지정해야 하고 완전한 구문은 <tt>" -"%s</tt>입니다. 다른 부분은 선택 사항으로 지정하지 않을 경우 기본값이 사용됩니" -"다. 명령의 <tt>NUM</tt>은 8과 같은 긍정적인 숫자를 나타냅니다. 예제 변수는 " -"<tt>serial --speed=38400 --unit=0</tt>입니다.</p>" +"<p>그래픽 콘솔을 사용할 경우 다양한 디스플레이 해상도를 사용할 수 있습니다. <tt>자동</tt> 옵션은 부팅 시 최적의 해상도를 찾습니다.</p>\n" +"<p>시리얼 콘솔을 사용할 경우 부팅 출력이 <tt>ttyS0</tt>과 같은 시리얼 기기에 인쇄됩니다. 최소한 <tt>--unit</tt> 옵션을 지정해야 하고 완전한 구문은 <tt>%s</tt>입니다. 다른 부분은 선택 사항으로 지정하지 않을 경우 기본값이 사용됩니다. 명령의 <tt>NUM</tt>은 8과 같은 긍정적인 숫자를 나타냅니다. 예제 변수는 <tt>serial --speed=38400 --unit=0</tt>입니다.</p>" -#. there's mode specified, use it -#: src/lib/bootloader/grub2_widgets.rb:503 +#. there's mode specified, use it +#: src/lib/bootloader/grub2_widgets.rb:503 msgid "To enable serial console you must provide the corresponding arguments." msgstr "시리얼 콘솔을 활성화하려면 해당하는 인수를 입력해야 합니다." -#. Translators: do not translate "unit" -#: src/lib/bootloader/grub2_widgets.rb:510 +#. Translators: do not translate "unit" +#: src/lib/bootloader/grub2_widgets.rb:510 msgid "" "To enable the serial console you must provide the corresponding arguments.\n" "The \"unit\" argument is required, the complete syntax is:\n" @@ -515,48 +440,48 @@ "\"unit\" 인수는 필수이며 완전한 구문은 다음과 같습니다. \n" "%s" -#: src/lib/bootloader/grub2_widgets.rb:551 +#: src/lib/bootloader/grub2_widgets.rb:551 msgid "Choose new graphical theme file" msgstr "새 그래픽 테마 파일 선택" -#. Translators: NUM is an abbreviation for "number", -#. to be substituted in a command like -#. "serial --unit=NUM --speed=NUM --parity={odd|even|no} --word=NUM --stop=NUM" -#. so do not use punctuation -#: src/lib/bootloader/grub2_widgets.rb:567 +#. Translators: NUM is an abbreviation for "number", +#. to be substituted in a command like +#. "serial --unit=NUM --speed=NUM --parity={odd|even|no} --word=NUM --stop=NUM" +#. so do not use punctuation +#: src/lib/bootloader/grub2_widgets.rb:567 msgid "NUM" msgstr "NUM" -#: src/lib/bootloader/grub2_widgets.rb:574 +#: src/lib/bootloader/grub2_widgets.rb:574 msgid "Use &graphical console" msgstr "그래픽 콘솔 사용(&G)" -#: src/lib/bootloader/grub2_widgets.rb:579 +#: src/lib/bootloader/grub2_widgets.rb:579 msgid "&Console resolution" msgstr "콘솔 해상도(&C)" -#: src/lib/bootloader/grub2_widgets.rb:584 +#: src/lib/bootloader/grub2_widgets.rb:584 msgid "&Console theme" msgstr "콘솔 테마(&C)" -#: src/lib/bootloader/grub2_widgets.rb:615 +#: src/lib/bootloader/grub2_widgets.rb:615 msgid "Autodetect by grub2" msgstr "grub2에 의해 자동 검색" -#: src/lib/bootloader/grub2_widgets.rb:623 +#: src/lib/bootloader/grub2_widgets.rb:623 msgid "Use &serial console" msgstr "직렬 콘솔 사용(&S)" -#: src/lib/bootloader/grub2_widgets.rb:630 +#: src/lib/bootloader/grub2_widgets.rb:630 msgid "&Console arguments" msgstr "콘솔 인수(&C)" -#. represent choosing default section to boot -#: src/lib/bootloader/grub2_widgets.rb:647 +#. represent choosing default section to boot +#: src/lib/bootloader/grub2_widgets.rb:647 msgid "&Default Boot Section" msgstr "기본 부트 섹션(&D)" -#: src/lib/bootloader/grub2_widgets.rb:651 +#: src/lib/bootloader/grub2_widgets.rb:651 msgid "" "<p> By pressing <b>Set as Default</b> you mark the selected section as\n" "the default. When booting, the boot loader will provide a boot menu and\n" @@ -569,45 +494,44 @@ "표시합니다. 부팅 시, 부트 로더에서 부팅 메뉴가 제공되고 \n" "사용자가 커널이나 부팅할 OS를 선택할 때까지 기다립니다. \n" "제한 시간 전까지 아무 키도 누르지 않으면 기본 \n" -"커널이나 OS가 부팅됩니다. <b>위로</b> 버튼과 <b>아래로</b> 버튼을 사용하여 부" -"트 로더 메뉴의 섹션 순서를\n" +"커널이나 OS가 부팅됩니다. <b>위로</b> 버튼과 <b>아래로</b> 버튼을 사용하여 부트 로더 메뉴의 섹션 순서를\n" "변경할 수 있습니다.</p>\n" -#. Represents stage1 location for bootloader -#: src/lib/bootloader/grub2_widgets.rb:686 +#. Represents stage1 location for bootloader +#: src/lib/bootloader/grub2_widgets.rb:686 msgid "Boot Loader Location" msgstr "부트 로더 위치" -#: src/lib/bootloader/grub2_widgets.rb:740 +#: src/lib/bootloader/grub2_widgets.rb:740 msgid "Custom boot device have to be specied if checked" msgstr "선택할 경우 사용자 정의 부트 장치를 지정해야 함" -#: src/lib/bootloader/grub2_widgets.rb:768 +#: src/lib/bootloader/grub2_widgets.rb:768 msgid "Boo&t from Boot Partition" msgstr "부트 파티션에서 부팅(&T)" -#: src/lib/bootloader/grub2_widgets.rb:769 +#: src/lib/bootloader/grub2_widgets.rb:769 msgid "Boo&t from Root Partition" msgstr "루트 파티션에서 부팅(&T)" -#: src/lib/bootloader/grub2_widgets.rb:770 +#: src/lib/bootloader/grub2_widgets.rb:770 msgid "Boot from &Master Boot Record" msgstr "마스터 부트 레코드에서 부팅(&M)" -#: src/lib/bootloader/grub2_widgets.rb:771 +#: src/lib/bootloader/grub2_widgets.rb:771 msgid "Boot from &Extended Partition" msgstr "확장 파티션으로 부팅(&E)" -#: src/lib/bootloader/grub2_widgets.rb:782 +#: src/lib/bootloader/grub2_widgets.rb:782 msgid "C&ustom Boot Partition" msgstr "사용자 정의 부트 파티션(&U)" -#. Represents button that open Device Map edit dialog -#: src/lib/bootloader/grub2_widgets.rb:795 +#. Represents button that open Device Map edit dialog +#: src/lib/bootloader/grub2_widgets.rb:795 msgid "&Edit Disk Boot Order" msgstr "디스크 부팅 순서 편집(&E)" -#: src/lib/bootloader/grub2_widgets.rb:801 +#: src/lib/bootloader/grub2_widgets.rb:801 msgid "" "<p><big><b>Disks Order</b></big><br>\n" "To specify the order of the disks according to the order in BIOS, use\n" @@ -621,71 +545,65 @@ "디스크를 추가할 때는 <b>추가</b>를,\n" "제거할 때는 <b>제거</b>를 누르십시오.</p>" -#. represents Tab with kernel related configuration -#: src/lib/bootloader/grub2_widgets.rb:822 +#. represents Tab with kernel related configuration +#: src/lib/bootloader/grub2_widgets.rb:822 msgid "&Kernel Parameters" msgstr "커널 파라미터(&K)" -#. Represent tab with options related to stage1 location and bootloader type -#: src/lib/bootloader/grub2_widgets.rb:847 +#. Represent tab with options related to stage1 location and bootloader type +#: src/lib/bootloader/grub2_widgets.rb:847 msgid "Boot Co&de Options" msgstr "부트 코드 옵션(&D)" -#. Represents bootloader specific options like its timeout, default section or password protection -#: src/lib/bootloader/grub2_widgets.rb:913 +#. Represents bootloader specific options like its timeout, default section or password protection +#: src/lib/bootloader/grub2_widgets.rb:913 msgid "Boot&loader Options" msgstr "부트 로더 옵션(&L)" -#: src/lib/bootloader/grub2efi.rb:80 +#: src/lib/bootloader/grub2efi.rb:80 msgid "Enable Secure Boot: %1" msgstr "보안 부트 활성화: %1" -#. TODO: not much helpful for customers -#. error report -#: src/lib/bootloader/main_dialog.rb:84 -msgid "" -"Because of the partitioning, the boot loader cannot be installed properly." +#. TODO: not much helpful for customers +#. error report +#: src/lib/bootloader/main_dialog.rb:84 +msgid "Because of the partitioning, the boot loader cannot be installed properly." msgstr "파티셔닝 때문에 부트 로더를 제대로 설치할 수 없습니다." -#. Represents when bootloader want user manage itself -#: src/lib/bootloader/none_bootloader.rb:15 -#: src/lib/bootloader/none_bootloader.rb:18 +#. Represents when bootloader want user manage itself +#: src/lib/bootloader/none_bootloader.rb:15 +#: src/lib/bootloader/none_bootloader.rb:18 msgid "Do not install any boot loader" msgstr "어떤 부트 로더도 설치하지 않습니다." -#. in installation always propose missing stuff -#. current below use proposed value if not already set -#. If set, then use same bootloader, but propose it again -#: src/lib/bootloader/proposal_client.rb:70 +#. in installation always propose missing stuff +#. current below use proposed value if not already set +#. If set, then use same bootloader, but propose it again +#: src/lib/bootloader/proposal_client.rb:70 msgid "Cannot detect device mounted as root. Please check partitioning." msgstr "마운트한 기기를 루트로 감지할 수 없습니다. 파티션을 확인하십시오." -#. proposal part - bootloader label -#: src/lib/bootloader/proposal_client.rb:101 +#. proposal part - bootloader label +#: src/lib/bootloader/proposal_client.rb:101 msgid "Booting" msgstr "부팅" -#. menubutton entry -#: src/lib/bootloader/proposal_client.rb:103 +#. menubutton entry +#: src/lib/bootloader/proposal_client.rb:103 msgid "&Booting" msgstr "부팅중(&B)" -#. warning text in the summary richtext -#: src/lib/bootloader/proposal_client.rb:188 -msgid "" -"No boot loader is selected for installation. Your system might not be " -"bootable." -msgstr "" -"어떤 부트 로더도 설치하기위해서 선택할 수 없습니다. 여러분의 시스템은 부팅할 " -"수 없습니다." +#. warning text in the summary richtext +#: src/lib/bootloader/proposal_client.rb:188 +msgid "No boot loader is selected for installation. Your system might not be bootable." +msgstr "어떤 부트 로더도 설치하기위해서 선택할 수 없습니다. 여러분의 시스템은 부팅할 수 없습니다." -#: src/lib/bootloader/proposal_client.rb:196 -msgid "" -"Because of the partitioning, the bootloader cannot be installed properly" +#: src/lib/bootloader/proposal_client.rb:196 +msgid "Because of the partitioning, the bootloader cannot be installed properly" msgstr "파티셔닝 때문에 부트 로더를 제대로 설치할 수 없습니다." -#. Dialog for graphical indication that bootloader configuration is read -#: src/lib/bootloader/read_dialog.rb:22 +#. Dialog for graphical indication that bootloader configuration is read +#: src/lib/bootloader/read_dialog.rb:22 msgid "" "<P><BIG><B>Boot Loader Configuration Tool</B></BIG><BR>\n" "Reading current configuration...</P>" @@ -693,14 +611,14 @@ "<P><BIG><B>부트 로더 구성 도구</B></BIG><BR>\n" "최신 구성 읽는 중...</P>" -#. TRANSLATORS: error message, %s stands for problematic device. -#: src/lib/bootloader/udev_mapping.rb:90 +#. TRANSLATORS: error message, %s stands for problematic device. +#: src/lib/bootloader/udev_mapping.rb:90 msgid "Unknown udev device '%s'" msgstr "알 수 없는 udev 기기 '%s'" -#. Write settings dialog -#. @return `:abort` if aborted and `:next` otherwise -#: src/lib/bootloader/write_dialog.rb:24 +#. Write settings dialog +#. @return `:abort` if aborted and `:next` otherwise +#: src/lib/bootloader/write_dialog.rb:24 msgid "" "<P><B><BIG>Saving Boot Loader Configuration</BIG></B><BR>\n" "Please wait...<br></p>" @@ -708,134 +626,109 @@ "<P><B><BIG>부트 로더 구성 저장중</BIG></B><BR>\n" "잠시 기다려 주십시오...<br></p>" -#. grub2 is sooo cool... -#: src/modules/BootSupportCheck.rb:94 +#. grub2 is sooo cool... +#: src/modules/BootSupportCheck.rb:94 msgid "Unsupported combination of hardware platform %1 and bootloader %2" msgstr "하드웨어 플랫폼 %1과(와) 부트 로더 %2의 조합이 지원되지 않습니다." -#. TRANSLATORS: description of technical problem. Do not translate technical terms unless native language have well known translation. -#: src/modules/BootSupportCheck.rb:117 -msgid "" -"Boot from MBR does not work together with btrfs filesystem and GPT disk " -"label without bios_grub partition.To fix this issue, create bios_grub " -"partition or use any ext filesystem for boot partition or do not install " -"stage 1 to MBR." -msgstr "" -"MBR에서 부팅할 때 bios_grub 파티션 없이 BTRFS 파일 시스템 및 GPT 디스크 레이" -"블을 함께 사용하면 작동하지 않습니다. 이 문제를 해결하려면 bios_grub 파티션" -"을 생성하거나 기존 ext 파일 시스템을 부팅 파티션으로 사용하거나 단계 1을 MBR" -"에 설치하지 마십시오." +#. TRANSLATORS: description of technical problem. Do not translate technical terms unless native language have well known translation. +#: src/modules/BootSupportCheck.rb:117 +msgid "Boot from MBR does not work together with btrfs filesystem and GPT disk label without bios_grub partition.To fix this issue, create bios_grub partition or use any ext filesystem for boot partition or do not install stage 1 to MBR." +msgstr "MBR에서 부팅할 때 bios_grub 파티션 없이 BTRFS 파일 시스템 및 GPT 디스크 레이블을 함께 사용하면 작동하지 않습니다. 이 문제를 해결하려면 bios_grub 파티션을 생성하거나 기존 ext 파일 시스템을 부팅 파티션으로 사용하거나 단계 1을 MBR에 설치하지 마십시오." -#. FIXME: big part of this method should be in BootStorage -#. check if boot device is on raid0 -#: src/modules/BootSupportCheck.rb:144 +#. FIXME: big part of this method should be in BootStorage +#. check if boot device is on raid0 +#: src/modules/BootSupportCheck.rb:144 msgid "The boot device is on raid type: %1. System will not boot." msgstr "부트 장치가 RAID 유형 %1에 있어 시스템을 부팅할 수 없습니다." -#. bnc#501043 added check for valid configuration -#: src/modules/BootSupportCheck.rb:156 -msgid "" -"The boot device is on software RAID1. Select other bootloader location, e.g. " -"Master Boot Record" -msgstr "" -"부트 장치가 소프트웨어 RAID1에 있습니다. 다른 부트로더 위치를 선택하십시오" -"(예: 마스터 부트 레코드)." +#. bnc#501043 added check for valid configuration +#: src/modules/BootSupportCheck.rb:156 +msgid "The boot device is on software RAID1. Select other bootloader location, e.g. Master Boot Record" +msgstr "부트 장치가 소프트웨어 RAID1에 있습니다. 다른 부트로더 위치를 선택하십시오(예: 마스터 부트 레코드)." -#. if partitioning worked before upgrade, it will keep working (bnc#886604) -#: src/modules/BootSupportCheck.rb:189 +#. if partitioning worked before upgrade, it will keep working (bnc#886604) +#: src/modules/BootSupportCheck.rb:189 msgid "Missing ext partition for booting. Cannot install boot code." -msgstr "" -"부팅을 위한 ext 파티션이 누락되었습니다. 부트 코드를 설치할 수 없습니다." +msgstr "부팅을 위한 ext 파티션이 누락되었습니다. 부트 코드를 설치할 수 없습니다." -#. activate set or there is already activate flag -#: src/modules/BootSupportCheck.rb:200 -msgid "" -"Activate flag is not set by installer. If it is not set at all, some BIOSes " -"could refuse to boot." -msgstr "" -"설치 프로그램에서 활성화 플래그를 설정하지 않았습니다. 전혀 설정하지 않을 경" -"우 일부 BIOS에서 부팅을 거부할 수 있습니다." +#. activate set or there is already activate flag +#: src/modules/BootSupportCheck.rb:200 +msgid "Activate flag is not set by installer. If it is not set at all, some BIOSes could refuse to boot." +msgstr "설치 프로그램에서 활성화 플래그를 설정하지 않았습니다. 전혀 설정하지 않을 경우 일부 BIOS에서 부팅을 거부할 수 있습니다." -#: src/modules/BootSupportCheck.rb:207 -msgid "" -"The installer will not modify the MBR of the disk. Unless it already " -"contains boot code, the BIOS won't be able to boot from this disk." -msgstr "" -"설치 프로그램에서는 디스크의 MBR을 수정하지 않습니다. 부트 코드가 이미 포함되" -"어 있지 않은 경우 BIOS에서 디스크로부터 부팅할 수 없습니다." +#: src/modules/BootSupportCheck.rb:207 +msgid "The installer will not modify the MBR of the disk. Unless it already contains boot code, the BIOS won't be able to boot from this disk." +msgstr "설치 프로그램에서는 디스크의 MBR을 수정하지 않습니다. 부트 코드가 이미 포함되어 있지 않은 경우 BIOS에서 디스크로부터 부팅할 수 없습니다." -#. progress stage, text in dialog (short, infinitiv) -#: src/modules/Bootloader.rb:120 +#. progress stage, text in dialog (short, infinitiv) +#: src/modules/Bootloader.rb:120 msgid "Check boot loader" msgstr "부트 로더 검사 " -#. progress stage, text in dialog (short, infinitiv) -#: src/modules/Bootloader.rb:122 +#. progress stage, text in dialog (short, infinitiv) +#: src/modules/Bootloader.rb:122 msgid "Read partitioning" msgstr "파티션 읽는중" -#. progress stage, text in dialog (short, infinitiv) -#: src/modules/Bootloader.rb:124 +#. progress stage, text in dialog (short, infinitiv) +#: src/modules/Bootloader.rb:124 msgid "Load boot loader settings" msgstr "부트 로더 설정들 적재" -#. progress step, text in dialog (short) -#: src/modules/Bootloader.rb:128 +#. progress step, text in dialog (short) +#: src/modules/Bootloader.rb:128 msgid "Checking boot loader..." msgstr "부트 로더를 검사중..." -#. progress step, text in dialog (short) -#: src/modules/Bootloader.rb:130 +#. progress step, text in dialog (short) +#: src/modules/Bootloader.rb:130 msgid "Reading partitioning..." msgstr "파티션을 읽는중..." -#. progress step, text in dialog (short) -#: src/modules/Bootloader.rb:132 +#. progress step, text in dialog (short) +#: src/modules/Bootloader.rb:132 msgid "Loading boot loader settings..." msgstr "부트 로더 설정들을 적재중..." -#. dialog header -#: src/modules/Bootloader.rb:136 +#. dialog header +#: src/modules/Bootloader.rb:136 msgid "Initializing Boot Loader Configuration" msgstr "부트 로더 구성을 초기화합니다." -#: src/modules/Bootloader.rb:158 +#: src/modules/Bootloader.rb:158 msgid "Unsupported Bootloader" msgstr "지원되지 않는 부트로더" -#: src/modules/Bootloader.rb:159 -msgid "" -"Unsupported bootloader '%s' detected. Use proposal of supported " -"configuration instead?" -msgstr "" -"지원되지 않는 부트로더 '%s'이(가) 감지되었습니다. 지원되는 구성 제안을 대신 " -"사용하시겠습니까?" +#: src/modules/Bootloader.rb:159 +msgid "Unsupported bootloader '%s' detected. Use proposal of supported configuration instead?" +msgstr "지원되지 않는 부트로더 '%s'이(가) 감지되었습니다. 지원되는 구성 제안을 대신 사용하시겠습니까?" -#: src/modules/Bootloader.rb:161 +#: src/modules/Bootloader.rb:161 msgid "Use" msgstr "사용" -#. progress stage, text in dialog (short) -#: src/modules/Bootloader.rb:246 +#. progress stage, text in dialog (short) +#: src/modules/Bootloader.rb:246 msgid "Create initrd" msgstr "initrd 생성" -#. progress stage, text in dialog (short) -#: src/modules/Bootloader.rb:248 +#. progress stage, text in dialog (short) +#: src/modules/Bootloader.rb:248 msgid "Save boot loader configuration" msgstr "부트 로더 구성 저장" -#. progress step, text in dialog (short) -#: src/modules/Bootloader.rb:252 +#. progress step, text in dialog (short) +#: src/modules/Bootloader.rb:252 msgid "Creating initrd..." msgstr "initrd 생성중..." -#. progress step, text in dialog (short) -#: src/modules/Bootloader.rb:254 +#. progress step, text in dialog (short) +#: src/modules/Bootloader.rb:254 msgid "Saving boot loader configuration..." msgstr "부트 로더 구성 저장중..." -#. progress line -#: src/modules/Bootloader.rb:260 +#. progress line +#: src/modules/Bootloader.rb:260 msgid "Saving Boot Loader Configuration" msgstr "부트 로더 구성 저장중" Modified: branches/SLE12-SP3/yast/ko/po/ca-management.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ca-management.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ca-management.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,514 +14,492 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line definition -#: src/clients/ca_mgm.rb:48 +#. Command line definition +#: src/clients/ca_mgm.rb:48 msgid "Managing CA and certificates" msgstr "CA 및 인증서 관리" -#: src/clients/ca_mgm.rb:51 +#: src/clients/ca_mgm.rb:51 msgid "Create a root CA" msgstr "루트 CA 작성" -#: src/clients/ca_mgm.rb:52 +#: src/clients/ca_mgm.rb:52 msgid "Create a certificate of a CA" msgstr "CA의 인증서 작성" -#: src/clients/ca_mgm.rb:53 +#: src/clients/ca_mgm.rb:53 msgid "Create a CRL of a CA" msgstr "CA의 CRL 작성" -#: src/clients/ca_mgm.rb:54 +#: src/clients/ca_mgm.rb:54 msgid "Export a CA to a file" msgstr "CA를 파일로 엑스포트" -#: src/clients/ca_mgm.rb:56 +#: src/clients/ca_mgm.rb:56 msgid "Export a certificate to a file" msgstr "인증서를 파일로 엑스포트" -#: src/clients/ca_mgm.rb:58 +#: src/clients/ca_mgm.rb:58 msgid "Export a CRL to a file" msgstr "CRL을 파일로 엑스포트" -#: src/clients/ca_mgm.rb:65 +#: src/clients/ca_mgm.rb:65 msgid "E-mail address" msgstr "전자 메일 주소(&M)" -#: src/clients/ca_mgm.rb:70 +#: src/clients/ca_mgm.rb:70 msgid "Organizational unit" msgstr "조직 단위" -#: src/clients/ca_mgm.rb:73 src/clients/ca_mgm_auto.rb:870 -#: src/include/ca-management/certificate.rb:456 -#: src/include/ca-management/request.rb:321 +#: src/clients/ca_mgm.rb:73 src/clients/ca_mgm_auto.rb:870 +#: src/include/ca-management/certificate.rb:456 +#: src/include/ca-management/request.rb:321 msgid "Organization" msgstr "조직" -#: src/clients/ca_mgm.rb:74 src/clients/ca_mgm_auto.rb:884 -#: src/include/ca-management/certificate.rb:458 -#: src/include/ca-management/request.rb:323 +#: src/clients/ca_mgm.rb:74 src/clients/ca_mgm_auto.rb:884 +#: src/include/ca-management/certificate.rb:458 +#: src/include/ca-management/request.rb:323 msgid "Locality" msgstr "구/군/시" -#: src/clients/ca_mgm.rb:75 src/clients/ca_mgm_auto.rb:889 -#: src/include/ca-management/certificate.rb:459 -#: src/include/ca-management/request.rb:324 +#: src/clients/ca_mgm.rb:75 src/clients/ca_mgm_auto.rb:889 +#: src/include/ca-management/certificate.rb:459 +#: src/include/ca-management/request.rb:324 msgid "State" msgstr "상태" -#: src/clients/ca_mgm.rb:76 src/clients/ca_mgm_auto.rb:865 -#: src/include/ca-management/certificate.rb:460 -#: src/include/ca-management/request.rb:325 +#: src/clients/ca_mgm.rb:76 src/clients/ca_mgm_auto.rb:865 +#: src/include/ca-management/certificate.rb:460 +#: src/include/ca-management/request.rb:325 msgid "Country" msgstr "국가(&C)" -#: src/clients/ca_mgm.rb:77 +#: src/clients/ca_mgm.rb:77 msgid "Valid days" msgstr "유효일" -#: src/clients/ca_mgm.rb:79 +#: src/clients/ca_mgm.rb:79 msgid "Key length" msgstr "키 길이(&K)" -#: src/clients/ca_mgm.rb:84 +#: src/clients/ca_mgm.rb:84 msgid "Password (Security: This should be given by an environment variable)" msgstr "비밀번호(보안: 이것은 환경 변수로 지정해야 합니다.)" -#: src/clients/ca_mgm.rb:93 +#: src/clients/ca_mgm.rb:93 msgid "CA password (Security: This should be given by an environment variable)" msgstr "CA 비밀번호(보안: 이것은 환경 변수로 지정해야 합니다.)" -#: src/clients/ca_mgm.rb:100 -msgid "" -"P12 password (Security: This should be given by an environment variable)" +#: src/clients/ca_mgm.rb:100 +msgid "P12 password (Security: This should be given by an environment variable)" msgstr "P12 비밀번호(보안: 이것은 환경 변수로 지정해야 합니다.)" -#: src/clients/ca_mgm.rb:112 +#: src/clients/ca_mgm.rb:112 msgid "Path of the exported CA, certificate, or CRL" msgstr "엑스포트한 CA, 인증서 또는 CRL 경로" -#. Autoyast configuration of ca-management -#. For use with autoinstallation. -#. @return sequence result -#: src/clients/ca_mgm_auto.rb:170 +#. Autoyast configuration of ca-management +#. For use with autoinstallation. +#. @return sequence result +#: src/clients/ca_mgm_auto.rb:170 msgid "CA Configuration" msgstr "CA 구성" -#: src/clients/ca_mgm_auto.rb:172 +#: src/clients/ca_mgm_auto.rb:172 msgid "" "<p>\n" -"YaST generates a default CA and certificate automatically. This CA and " -"certificate\n" +"YaST generates a default CA and certificate automatically. This CA and certificate\n" "is used for communicating with the Apache server.\n" -"Here, change the settings of this CA and certificate or import a CA and " -"certificate from a file.\n" +"Here, change the settings of this CA and certificate or import a CA and certificate from a file.\n" "</p>\n" msgstr "" "<p>\n" "YaST에서 기본 CA 및 인증서를 자동으로 생성합니다. 이 CA와 인증서는\n" " Apache 서버와의 통신에 사용됩니다.\n" -" 여기서는 이 CA와 인증서의 설정을 변경하거나 CA와 인증서를 파일에서 임포트합" -"니다.\n" +" 여기서는 이 CA와 인증서의 설정을 변경하거나 CA와 인증서를 파일에서 임포트합니다.\n" " </p>\n" -#. Initialization dialog contents -#: src/clients/ca_mgm_auto.rb:193 +#. Initialization dialog contents +#: src/clients/ca_mgm_auto.rb:193 msgid "Import Common CA and Certificate" msgstr "일반 CA 및 인증서 임포트" -#: src/clients/ca_mgm_auto.rb:209 +#: src/clients/ca_mgm_auto.rb:209 msgid "&Path of Certificate" msgstr "인증서 경로(&P)" -#: src/clients/ca_mgm_auto.rb:235 src/clients/ca_mgm_auto.rb:362 -#: src/clients/ca_mgm_proposal.rb:301 src/clients/ca_select_proposal.rb:466 -#: src/include/ca-management/new_cert.rb:573 +#: src/clients/ca_mgm_auto.rb:235 src/clients/ca_mgm_auto.rb:362 +#: src/clients/ca_mgm_proposal.rb:301 src/clients/ca_select_proposal.rb:466 +#: src/include/ca-management/new_cert.rb:573 #: src/include/ca-management/util.rb:277 -#: src/include/ca-management/util.rb:1211 +#: src/include/ca-management/util.rb:1211 msgid "&Password:" msgstr "비밀번호(&P)" -#: src/clients/ca_mgm_auto.rb:245 src/clients/ca_mgm_auto.rb:372 -#: src/clients/ca_mgm_proposal.rb:302 src/clients/ca_select_proposal.rb:476 +#: src/clients/ca_mgm_auto.rb:245 src/clients/ca_mgm_auto.rb:372 +#: src/clients/ca_mgm_proposal.rb:302 src/clients/ca_select_proposal.rb:476 msgid "Co&nfirm Password" msgstr "비밀번호 확인(&F)" -#: src/clients/ca_mgm_auto.rb:256 +#: src/clients/ca_mgm_auto.rb:256 msgid "Generate Common CA and Certificate" msgstr "일반 CA 및 인증서 생성" -#: src/clients/ca_mgm_auto.rb:272 src/clients/ca_select_proposal.rb:401 -#: src/include/ca-management/new_cert.rb:211 -#: src/include/ca-management/util.rb:1585 +#: src/clients/ca_mgm_auto.rb:272 src/clients/ca_select_proposal.rb:401 +#: src/include/ca-management/new_cert.rb:211 +#: src/include/ca-management/util.rb:1585 msgid "&CA Name:" msgstr "CA 이름(&C):" -#: src/clients/ca_mgm_auto.rb:285 src/clients/ca_select_proposal.rb:408 -#: src/include/ca-management/new_cert.rb:216 +#: src/clients/ca_mgm_auto.rb:285 src/clients/ca_select_proposal.rb:408 +#: src/include/ca-management/new_cert.rb:216 msgid "&Common Name:" msgstr "일반 이름(&C):" -#: src/clients/ca_mgm_auto.rb:299 src/clients/ca_select_proposal.rb:482 +#: src/clients/ca_mgm_auto.rb:299 src/clients/ca_select_proposal.rb:482 msgid "E-Mail" msgstr "전자 메일(&E)" -#: src/clients/ca_mgm_auto.rb:309 src/clients/ca_select_proposal.rb:428 -#: src/include/ca-management/new_cert.rb:262 +#: src/clients/ca_mgm_auto.rb:309 src/clients/ca_select_proposal.rb:428 +#: src/include/ca-management/new_cert.rb:262 msgid "C&ountry:" msgstr "국가(&O):" -#: src/clients/ca_mgm_auto.rb:319 src/clients/ca_select_proposal.rb:438 -#: src/include/ca-management/new_cert.rb:227 +#: src/clients/ca_mgm_auto.rb:319 src/clients/ca_select_proposal.rb:438 +#: src/include/ca-management/new_cert.rb:227 msgid "O&rganization:" msgstr "조직(&R):" -#: src/clients/ca_mgm_auto.rb:328 src/clients/ca_select_proposal.rb:447 -#: src/include/ca-management/new_cert.rb:236 +#: src/clients/ca_mgm_auto.rb:328 src/clients/ca_select_proposal.rb:447 +#: src/include/ca-management/new_cert.rb:236 msgid "Or&ganizational Unit:" msgstr "조직 단위" -#: src/clients/ca_mgm_auto.rb:342 src/clients/ca_select_proposal.rb:455 -#: src/include/ca-management/new_cert.rb:247 +#: src/clients/ca_mgm_auto.rb:342 src/clients/ca_select_proposal.rb:455 +#: src/include/ca-management/new_cert.rb:247 msgid "Loca&lity:" msgstr "구/군/시(&L):" -#: src/clients/ca_mgm_auto.rb:351 src/clients/ca_select_proposal.rb:458 -#: src/include/ca-management/new_cert.rb:250 +#: src/clients/ca_mgm_auto.rb:351 src/clients/ca_select_proposal.rb:458 +#: src/include/ca-management/new_cert.rb:250 msgid "&State:" msgstr "도(&S)" -#: src/clients/ca_mgm_auto.rb:381 +#: src/clients/ca_mgm_auto.rb:381 msgid "Take Local Server Name" msgstr "로컬 서버 이름 설정" -#: src/clients/ca_mgm_auto.rb:394 src/clients/ca_select_proposal.rb:418 +#: src/clients/ca_mgm_auto.rb:394 src/clients/ca_select_proposal.rb:418 msgid "&Server Name:" msgstr "서버 이름" -#. Get the user input. -#. -#. Get the user input. -#. -#. checking password -#. p12Passwd is required is keyPasswd has been given -#. export to file -#. export to file -#: src/clients/ca_mgm_auto.rb:478 src/clients/ca_mgm_auto.rb:536 -#: src/clients/ca_mgm_proposal.rb:320 src/clients/ca_select_proposal.rb:536 -#: src/include/ca-management/util.rb:216 -#: src/include/ca-management/util.rb:565 +#. Get the user input. +#. +#. Get the user input. +#. +#. checking password +#. p12Passwd is required is keyPasswd has been given +#. export to file +#. export to file +#: src/clients/ca_mgm_auto.rb:478 src/clients/ca_mgm_auto.rb:536 +#: src/clients/ca_mgm_proposal.rb:320 src/clients/ca_select_proposal.rb:536 +#: src/include/ca-management/util.rb:216 src/include/ca-management/util.rb:565 #: src/include/ca-management/util.rb:777 -#: src/include/ca-management/util.rb:1121 +#: src/include/ca-management/util.rb:1121 msgid "New passwords do not match." msgstr "새 비밀번호가 일치하지 않습니다." -#: src/clients/ca_mgm_auto.rb:482 src/clients/ca_mgm_auto.rb:540 -#: src/clients/ca_select_proposal.rb:540 +#: src/clients/ca_mgm_auto.rb:482 src/clients/ca_mgm_auto.rb:540 +#: src/clients/ca_select_proposal.rb:540 msgid "Password length should be greater than three characters." msgstr "비밀번호 길이는 세 글자보다 길어야 합니다." -#. finding entry in list -#. Error popup -#: src/clients/ca_mgm_auto.rb:495 src/include/ca-management/new_cert.rb:398 -#: src/include/ca-management/util.rb:1665 +#. finding entry in list +#. Error popup +#: src/clients/ca_mgm_auto.rb:495 src/include/ca-management/new_cert.rb:398 +#: src/include/ca-management/util.rb:1665 msgid "CA name required." msgstr "CA 이름이 필요합니다." -#: src/clients/ca_mgm_auto.rb:506 src/include/ca-management/new_cert.rb:403 +#: src/clients/ca_mgm_auto.rb:506 src/include/ca-management/new_cert.rb:403 msgid "Common name required." msgstr "일반 이름이 필요합니다." -#. CaMgm::prop_selection = `def; -#. Checking if there is an EMAIL entry without using the -#. "add" button -#: src/clients/ca_mgm_auto.rb:514 src/clients/ca_mgm_proposal.rb:284 -#: src/clients/ca_select_proposal.rb:589 -#: src/include/ca-management/new_cert.rb:347 -#: src/include/ca-management/new_cert.rb:428 +#. CaMgm::prop_selection = `def; +#. Checking if there is an EMAIL entry without using the +#. "add" button +#: src/clients/ca_mgm_auto.rb:514 src/clients/ca_mgm_proposal.rb:284 +#: src/clients/ca_select_proposal.rb:589 +#: src/include/ca-management/new_cert.rb:347 +#: src/include/ca-management/new_cert.rb:428 msgid "Invalid e-mail format." msgstr "전자 메일 형식이 잘못되었습니다." -#: src/clients/ca_mgm_auto.rb:527 +#: src/clients/ca_mgm_auto.rb:527 msgid "Server name required." msgstr "서버 이름이 필요합니다." -#: src/clients/ca_mgm_auto.rb:561 src/modules/YaPI/CaManagement.pm:5949 +#: src/clients/ca_mgm_auto.rb:561 src/modules/YaPI/CaManagement.pm:5949 msgid "Cannot read the certificate." msgstr "인증서를 읽을 수 없습니다." -#. Configuration summary text for autoyast -#: src/clients/ca_mgm_auto.rb:831 +#. Configuration summary text for autoyast +#: src/clients/ca_mgm_auto.rb:831 msgid "Import Certificate from File" msgstr "파일에서 인증서 임포트" -#: src/clients/ca_mgm_auto.rb:837 +#: src/clients/ca_mgm_auto.rb:837 msgid "Server Name" msgstr "서버 이름" -#: src/clients/ca_mgm_auto.rb:839 +#: src/clients/ca_mgm_auto.rb:839 msgid "[local server name]" msgstr "[로컬 서버 이름]" -#: src/clients/ca_mgm_auto.rb:846 +#: src/clients/ca_mgm_auto.rb:846 msgid "CA Name" msgstr "CA 이름" -#. To translators: table headers -#: src/clients/ca_mgm_auto.rb:851 -#: src/include/ca-management/certificate.rb:454 -#: src/include/ca-management/request.rb:319 +#. To translators: table headers +#: src/clients/ca_mgm_auto.rb:851 src/include/ca-management/certificate.rb:454 +#: src/include/ca-management/request.rb:319 msgid "Common Name" msgstr "일반 이름" -#: src/clients/ca_mgm_auto.rb:857 src/clients/ca_mgm_auto.rb:863 -#: src/clients/ca_mgm_auto.rb:868 src/clients/ca_mgm_auto.rb:873 -#: src/clients/ca_mgm_auto.rb:881 src/clients/ca_mgm_auto.rb:887 -#: src/clients/ca_mgm_auto.rb:892 src/clients/ca_mgm_auto.rb:902 +#: src/clients/ca_mgm_auto.rb:857 src/clients/ca_mgm_auto.rb:863 +#: src/clients/ca_mgm_auto.rb:868 src/clients/ca_mgm_auto.rb:873 +#: src/clients/ca_mgm_auto.rb:881 src/clients/ca_mgm_auto.rb:887 +#: src/clients/ca_mgm_auto.rb:892 src/clients/ca_mgm_auto.rb:902 msgid "[not set]" msgstr "[설정 안 함]" -#: src/clients/ca_mgm_auto.rb:860 +#: src/clients/ca_mgm_auto.rb:860 msgid "Email" msgstr "이메일" -#: src/clients/ca_mgm_auto.rb:875 -#: src/include/ca-management/certificate.rb:457 -#: src/include/ca-management/request.rb:322 +#: src/clients/ca_mgm_auto.rb:875 src/include/ca-management/certificate.rb:457 +#: src/include/ca-management/request.rb:322 msgid "Organizational Unit" msgstr "조직 단위" -#: src/clients/ca_mgm_auto.rb:895 +#: src/clients/ca_mgm_auto.rb:895 msgid "Password" msgstr "비밀번호" -#: src/clients/ca_mgm_auto.rb:904 +#: src/clients/ca_mgm_auto.rb:904 msgid "[set]" msgstr "설정(&S)" -#. Write all ca-management settings -#. @return true on success -#: src/clients/ca_mgm_auto.rb:916 +#. Write all ca-management settings +#. @return true on success +#: src/clients/ca_mgm_auto.rb:916 msgid "Generating Common Server Certificate" msgstr "일반 서버 인증서 생성" -#. Progress stage 1/2 -#. Progress stage 1/2 -#: src/clients/ca_mgm_auto.rb:930 src/clients/ca_mgm_auto.rb:936 +#. Progress stage 1/2 +#. Progress stage 1/2 +#: src/clients/ca_mgm_auto.rb:930 src/clients/ca_mgm_auto.rb:936 msgid "Read server information" msgstr "서버 정보 읽기" -#. Progress stage 2/2 -#: src/clients/ca_mgm_auto.rb:932 +#. Progress stage 2/2 +#: src/clients/ca_mgm_auto.rb:932 msgid "Create the default CA and server certificate" msgstr "기본 CA 및 서버 인증서 작성" -#. Progress step 2/2 -#: src/clients/ca_mgm_auto.rb:938 +#. Progress step 2/2 +#: src/clients/ca_mgm_auto.rb:938 msgid "Creating the default CA and server certificate..." msgstr "기본 CA 및 서버 인증서 작성 중..." -#. Progress finished -#: src/clients/ca_mgm_auto.rb:940 +#. Progress finished +#: src/clients/ca_mgm_auto.rb:940 msgid "Finished" msgstr "완료됨" -#. Error message -#: src/clients/ca_mgm_auto.rb:1064 +#. Error message +#: src/clients/ca_mgm_auto.rb:1064 msgid "Cannot create certificates." msgstr "인증서를 작성할 수 없습니다." -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2004 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#. File: -#. clients/ca_mgm_proposal.ycp -#. -#. Package: -#. Configuration of CA Management -#. -#. Summary: -#. Proposal function dispatcher. -#. -#. Authors: -#. Stefan Schubert -#. -#. $Id$ -#. -#. Proposal function dispatcher for CA Management -#: src/clients/ca_mgm_proposal.rb:107 -msgid "" -"Cannot evaluate the name of the local machine. Change the values of Server " -"Name and E-Mail." -msgstr "" -"로컬 시스템의 이름을 확인할 수 없습니다. 서버 이름 및 전자 메일의 값을 변경하" -"십시오." +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2004 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#. File: +#. clients/ca_mgm_proposal.ycp +#. +#. Package: +#. Configuration of CA Management +#. +#. Summary: +#. Proposal function dispatcher. +#. +#. Authors: +#. Stefan Schubert +#. +#. $Id$ +#. +#. Proposal function dispatcher for CA Management +#: src/clients/ca_mgm_proposal.rb:107 +msgid "Cannot evaluate the name of the local machine. Change the values of Server Name and E-Mail." +msgstr "로컬 시스템의 이름을 확인할 수 없습니다. 서버 이름 및 전자 메일의 값을 변경하십시오." -#. new handling of force reset because of (#238754) -#. NO FORCE RESET -#. richtext label -#: src/clients/ca_mgm_proposal.rb:159 src/clients/ca_mgm_proposal.rb:213 -#: src/clients/ca_mgm_proposal.rb:440 src/clients/ca_mgm_proposal.rb:466 +#. new handling of force reset because of (#238754) +#. NO FORCE RESET +#. richtext label +#: src/clients/ca_mgm_proposal.rb:159 src/clients/ca_mgm_proposal.rb:213 +#: src/clients/ca_mgm_proposal.rb:440 src/clients/ca_mgm_proposal.rb:466 msgid "CA Management" msgstr "CA 관리" -#: src/clients/ca_mgm_proposal.rb:160 src/clients/ca_mgm_proposal.rb:214 -#: src/clients/ca_mgm_proposal.rb:441 +#: src/clients/ca_mgm_proposal.rb:160 src/clients/ca_mgm_proposal.rb:214 +#: src/clients/ca_mgm_proposal.rb:441 msgid "Settings have already been written." msgstr "설정이 이미 기록되었습니다." -#: src/clients/ca_mgm_proposal.rb:161 src/clients/ca_mgm_proposal.rb:215 -#: src/clients/ca_mgm_proposal.rb:442 +#: src/clients/ca_mgm_proposal.rb:161 src/clients/ca_mgm_proposal.rb:215 +#: src/clients/ca_mgm_proposal.rb:442 msgid "Delete the old settings?" msgstr "이전 설정을 삭제하시겠습니까?" -#: src/clients/ca_mgm_proposal.rb:296 src/clients/ca_mgm_proposal.rb:338 -msgid "" -"Unable to retrieve the system root password. Set a CA password to continue." -msgstr "" -"시스템 루트 비밀번호를 검색할 수 없습니다. 계속하려면 CA 비밀번호를 설정하십" -"시오." +#: src/clients/ca_mgm_proposal.rb:296 src/clients/ca_mgm_proposal.rb:338 +msgid "Unable to retrieve the system root password. Set a CA password to continue." +msgstr "시스템 루트 비밀번호를 검색할 수 없습니다. 계속하려면 CA 비밀번호를 설정하십시오." -#: src/clients/ca_mgm_proposal.rb:325 +#: src/clients/ca_mgm_proposal.rb:325 msgid "" "The password is too short to use for the certificates. \n" -"Enter a valid password for the certificates or disable certificate " -"creation.\n" +"Enter a valid password for the certificates or disable certificate creation.\n" msgstr "" "비밀번호가 너무 짧아서 인증서에 사용할 수 없습니다. \n" "인증서에 유효한 비밀번호를 입력하거나 인증서 생성을 비활성화하십시오.\n" -#: src/clients/ca_mgm_proposal.rb:351 +#: src/clients/ca_mgm_proposal.rb:351 msgid "Current default CA and certificate." msgstr "현재 기본 CA 및 인증서입니다." -#: src/clients/ca_mgm_proposal.rb:356 src/clients/ca_mgm_proposal.rb:364 +#: src/clients/ca_mgm_proposal.rb:356 src/clients/ca_mgm_proposal.rb:364 msgid "Creating default CA and certificate." msgstr "기본 CA 및 인증서를 작성합니다." -#: src/clients/ca_mgm_proposal.rb:357 +#: src/clients/ca_mgm_proposal.rb:357 msgid "With higher security requirements, you should change the password." msgstr "더 높은 보안 요구 사항에 따라 비밀번호를 변경해야 합니다." -#: src/clients/ca_mgm_proposal.rb:369 +#: src/clients/ca_mgm_proposal.rb:369 msgid "[manually set]" msgstr "[수동으로 설정]" -#: src/clients/ca_mgm_proposal.rb:370 +#: src/clients/ca_mgm_proposal.rb:370 msgid "[root password]" msgstr "루트 비밀번호" -#: src/clients/ca_mgm_proposal.rb:390 -#: src/include/ca-management/crlExport.rb:487 -#: src/include/ca-management/dialog-ca.rb:158 +#: src/clients/ca_mgm_proposal.rb:390 +#: src/include/ca-management/crlExport.rb:487 +#: src/include/ca-management/dialog-ca.rb:158 msgid "CA Name: " msgstr "CA 이름:" -#: src/clients/ca_mgm_proposal.rb:391 +#: src/clients/ca_mgm_proposal.rb:391 msgid "Common Name: " msgstr "일반 이름:" -#: src/clients/ca_mgm_proposal.rb:392 +#: src/clients/ca_mgm_proposal.rb:392 msgid "Server Name: " msgstr "서버 이름: " -#: src/clients/ca_mgm_proposal.rb:393 +#: src/clients/ca_mgm_proposal.rb:393 msgid "Country: " msgstr "국가(&C)" -#: src/clients/ca_mgm_proposal.rb:394 +#: src/clients/ca_mgm_proposal.rb:394 msgid "Password: " msgstr "비밀번호:" -#: src/clients/ca_mgm_proposal.rb:395 +#: src/clients/ca_mgm_proposal.rb:395 msgid "E-Mail: " msgstr "전자 메일(&E)" -#: src/clients/ca_mgm_proposal.rb:396 +#: src/clients/ca_mgm_proposal.rb:396 msgid "Alternative Names: " msgstr "대체 이름: " -#: src/clients/ca_mgm_proposal.rb:406 +#: src/clients/ca_mgm_proposal.rb:406 msgid "" -"The root password is too short for use as the password for the " -"certificates.\n" -" Enter a valid password for the certificates or disable certificate " -"creation.\n" +"The root password is too short for use as the password for the certificates.\n" +" Enter a valid password for the certificates or disable certificate creation.\n" msgstr "" "루트 비밀번호가 너무 짧아서 인증서의 비밀번호로 사용할 수 없습니다. \n" "인증서에 유효한 비밀번호를 입력하거나 인증서 생성을 비활성화하십시오.\n" -#: src/clients/ca_mgm_proposal.rb:413 +#: src/clients/ca_mgm_proposal.rb:413 msgid "Not creating a CA and certificate." msgstr "CA 및 인증서를 작성하지 않습니다." -#: src/clients/ca_mgm_proposal.rb:415 +#: src/clients/ca_mgm_proposal.rb:415 msgid "Importing a CA and certificate from file" msgstr "CA 및 인증서를 파일에서 임포트" -#: src/clients/ca_mgm_proposal.rb:427 -msgid "" -"<p>Is the default hostname <b>linux</b> really unique? The certificate is " -"only valid if the hostname is correct.</p>" -msgstr "" -"<p>기본 호스트 이름인 <b>linux</b>는 고유한 이름입니까? 호스트 이름이 정확한 " -"경우에만 인증서가 유효합니다.</p>" +#: src/clients/ca_mgm_proposal.rb:427 +msgid "<p>Is the default hostname <b>linux</b> really unique? The certificate is only valid if the hostname is correct.</p>" +msgstr "<p>기본 호스트 이름인 <b>linux</b>는 고유한 이름입니까? 호스트 이름이 정확한 경우에만 인증서가 유효합니다.</p>" -#. menu title -#: src/clients/ca_mgm_proposal.rb:468 +#. menu title +#: src/clients/ca_mgm_proposal.rb:468 msgid "&CA Management" msgstr "CA 관리(&C)" -#. ---------------------------------------------------------------------- -#. MAIN module -#. ---------------------------------------------------------------------- -#: src/clients/ca_select_proposal.rb:61 +#. ---------------------------------------------------------------------- +#. MAIN module +#. ---------------------------------------------------------------------- +#: src/clients/ca_select_proposal.rb:61 msgid "Managing CAs and Certificates" msgstr "CA 및 인증서 관리" -#: src/clients/ca_select_proposal.rb:64 +#: src/clients/ca_select_proposal.rb:64 msgid "Selection" msgstr "선택" -#: src/clients/ca_select_proposal.rb:72 +#: src/clients/ca_select_proposal.rb:72 msgid "Create &Default CA and Certificate" msgstr "기본 CA 및 인증서 작성(&D)" -#: src/clients/ca_select_proposal.rb:81 +#: src/clients/ca_select_proposal.rb:81 msgid "Edit Default &Settings" msgstr "기본 설정 편집(&S)" -#: src/clients/ca_select_proposal.rb:89 +#: src/clients/ca_select_proposal.rb:89 msgid "Do &Not Create CA and Certificate" msgstr "CA 및 인증서를 작성하지 않음(&N)" -#: src/clients/ca_select_proposal.rb:96 +#: src/clients/ca_select_proposal.rb:96 msgid "Import CA and Certificate from D&isk" msgstr "CA 및 인증서를 디스크에서 임포트(&I)" -#: src/clients/ca_select_proposal.rb:103 +#: src/clients/ca_select_proposal.rb:103 msgid "" "<p>\n" -"In this frame, select the desired installation method for <b>CAs</b> and " -"<b>certificates</b>\n" +"In this frame, select the desired installation method for <b>CAs</b> and <b>certificates</b>\n" "while completing the installation.\n" "</p>\n" msgstr "" @@ -530,11 +508,10 @@ " 원하는 설치 방법을 선택합니다.\n" " </p>\n" -#: src/clients/ca_select_proposal.rb:112 +#: src/clients/ca_select_proposal.rb:112 msgid "" "<p>\n" -"You also have the possibility of creating the default CA and certificate in " -"the installed system \n" +"You also have the possibility of creating the default CA and certificate in the installed system \n" "if you do not want to create or import it now.\n" "</p>\n" msgstr "" @@ -543,100 +520,98 @@ " 기본 CA 및 인증서를 작성할 수도 있습니다.\n" " </p>\n" -#. Creates Country items -#. @return a list country items formated for a UI table -#. saved default settings -#. push button label -#: src/clients/ca_select_proposal.rb:209 -#: src/include/ca-management/new_cert_callbacks.rb:143 -#: src/include/ca-management/new_cert_callbacks.rb:172 +#. Creates Country items +#. @return a list country items formated for a UI table +#. saved default settings +#. push button label +#: src/clients/ca_select_proposal.rb:209 +#: src/include/ca-management/new_cert_callbacks.rb:143 +#: src/include/ca-management/new_cert_callbacks.rb:172 msgid "&Name:" msgstr "이름" -#. push button label -#: src/clients/ca_select_proposal.rb:225 -#: src/include/ca-management/new_cert_items.rb:164 -#: src/include/ca-management/new_cert_items.rb:215 -#: src/include/ca-management/new_cert_items.rb:258 -#: src/include/ca-management/new_cert_items.rb:330 -#: src/include/ca-management/new_cert_items.rb:425 -#: src/include/ca-management/new_cert_items.rb:446 -#: src/include/ca-management/new_cert_items.rb:489 -#: src/include/ca-management/new_cert_items.rb:514 -#: src/include/ca-management/new_cert_items.rb:610 -#: src/include/ca-management/new_cert_items.rb:628 -#: src/include/ca-management/new_cert_items.rb:653 -#: src/include/ca-management/new_cert_items.rb:680 -#: src/include/ca-management/new_cert_items.rb:705 -#: src/include/ca-management/new_cert_items.rb:730 -#: src/include/ca-management/new_cert_items.rb:755 -#: src/include/ca-management/new_cert_items.rb:780 -#: src/include/ca-management/new_cert_items.rb:805 -#: src/include/ca-management/new_cert_items.rb:830 +#. push button label +#: src/clients/ca_select_proposal.rb:225 +#: src/include/ca-management/new_cert_items.rb:164 +#: src/include/ca-management/new_cert_items.rb:215 +#: src/include/ca-management/new_cert_items.rb:258 +#: src/include/ca-management/new_cert_items.rb:330 +#: src/include/ca-management/new_cert_items.rb:425 +#: src/include/ca-management/new_cert_items.rb:446 +#: src/include/ca-management/new_cert_items.rb:489 +#: src/include/ca-management/new_cert_items.rb:514 +#: src/include/ca-management/new_cert_items.rb:610 +#: src/include/ca-management/new_cert_items.rb:628 +#: src/include/ca-management/new_cert_items.rb:653 +#: src/include/ca-management/new_cert_items.rb:680 +#: src/include/ca-management/new_cert_items.rb:705 +#: src/include/ca-management/new_cert_items.rb:730 +#: src/include/ca-management/new_cert_items.rb:755 +#: src/include/ca-management/new_cert_items.rb:780 +#: src/include/ca-management/new_cert_items.rb:805 +#: src/include/ca-management/new_cert_items.rb:830 msgid "critical" msgstr "중요" -#. To translators: table headers -#. To translators: table headers -#. To translators: table headers -#. To translators: table headers -#: src/clients/ca_select_proposal.rb:238 -#: src/include/ca-management/crlDefault.rb:218 -#: src/include/ca-management/new_cert_items.rb:278 -#: src/include/ca-management/new_cert_items.rb:535 +#. To translators: table headers +#. To translators: table headers +#. To translators: table headers +#. To translators: table headers +#: src/clients/ca_select_proposal.rb:238 +#: src/include/ca-management/crlDefault.rb:218 +#: src/include/ca-management/new_cert_items.rb:278 +#: src/include/ca-management/new_cert_items.rb:535 msgid "Kind" msgstr "종류" -#: src/clients/ca_select_proposal.rb:239 -#: src/include/ca-management/crlDefault.rb:219 -#: src/include/ca-management/new_cert_items.rb:279 -#: src/include/ca-management/new_cert_items.rb:536 +#: src/clients/ca_select_proposal.rb:239 +#: src/include/ca-management/crlDefault.rb:219 +#: src/include/ca-management/new_cert_items.rb:279 +#: src/include/ca-management/new_cert_items.rb:536 msgid "Name" msgstr "이름" -#. restoring table -#. restoring table -#. restoring table -#. restoring table -#: src/clients/ca_select_proposal.rb:302 -#: src/clients/ca_select_proposal.rb:356 -#: src/include/ca-management/new_cert_callbacks.rb:514 -#: src/include/ca-management/new_cert_callbacks.rb:557 -#: src/include/ca-management/new_cert_callbacks.rb:949 -#: src/include/ca-management/new_cert_callbacks.rb:991 +#. restoring table +#. restoring table +#. restoring table +#. restoring table +#: src/clients/ca_select_proposal.rb:302 src/clients/ca_select_proposal.rb:356 +#: src/include/ca-management/new_cert_callbacks.rb:514 +#: src/include/ca-management/new_cert_callbacks.rb:557 +#: src/include/ca-management/new_cert_callbacks.rb:949 +#: src/include/ca-management/new_cert_callbacks.rb:991 msgid "No item has been selected." msgstr "항목을 선택하지 않았습니다." -#. To translators: ContinueCancel Popup headline -#. Handle events in a tab of a dialog -#. To translators: ContinueCancel Popup headline -#. To translators: ContinueCancel Popup headline -#. we need to fake a certificate name -#: src/clients/ca_select_proposal.rb:364 -#: src/include/ca-management/certificate.rb:585 -#: src/include/ca-management/new_cert_callbacks.rb:523 -#: src/include/ca-management/new_cert_callbacks.rb:958 -#: src/include/ca-management/request.rb:429 -#: src/include/ca-management/startup.rb:107 +#. To translators: ContinueCancel Popup headline +#. Handle events in a tab of a dialog +#. To translators: ContinueCancel Popup headline +#. To translators: ContinueCancel Popup headline +#. we need to fake a certificate name +#: src/clients/ca_select_proposal.rb:364 +#: src/include/ca-management/certificate.rb:585 +#: src/include/ca-management/new_cert_callbacks.rb:523 +#: src/include/ca-management/new_cert_callbacks.rb:958 +#: src/include/ca-management/request.rb:429 +#: src/include/ca-management/startup.rb:107 msgid "Delete" msgstr "삭제" -#. To translators: ContinueCancel Popup -#. To translators: ContinueCancel Popup -#. To translators: ContinueCancel Popup -#: src/clients/ca_select_proposal.rb:366 -#: src/include/ca-management/new_cert_callbacks.rb:525 -#: src/include/ca-management/new_cert_callbacks.rb:960 +#. To translators: ContinueCancel Popup +#. To translators: ContinueCancel Popup +#. To translators: ContinueCancel Popup +#: src/clients/ca_select_proposal.rb:366 +#: src/include/ca-management/new_cert_callbacks.rb:525 +#: src/include/ca-management/new_cert_callbacks.rb:960 msgid "Really delete this entry?" msgstr "이 항목을 삭제하시겠습니까?" -#. editDefaultEntries() - changing Entries -#. @return `next,`back,`abort -#: src/clients/ca_select_proposal.rb:388 +#. editDefaultEntries() - changing Entries +#. @return `next,`back,`abort +#: src/clients/ca_select_proposal.rb:388 msgid "" "<p>\n" -"YaST generates a <b>default CA and certificate</b> automatically. This CA " -"and certificate\n" +"YaST generates a <b>default CA and certificate</b> automatically. This CA and certificate\n" "is used for communicating with the <b>Apache server</b>.\n" "Here, change these <b>default settings</b>.\n" "</p>\n" @@ -647,94 +622,66 @@ " 여기서는 이러한 <b>기본 설정</b>을 변경합니다.\n" " </p>\n" -#: src/clients/ca_select_proposal.rb:484 +#: src/clients/ca_select_proposal.rb:484 msgid "&Edit Alternative Names" msgstr "대체 이름 편집(&E) " -#. Screen title for the first interactive dialog -#: src/clients/ca_select_proposal.rb:490 -#: src/include/ca-management/certDefault.rb:96 +#. Screen title for the first interactive dialog +#: src/clients/ca_select_proposal.rb:490 +#: src/include/ca-management/certDefault.rb:96 msgid "Edit Default Settings" msgstr "기본 설정 편집" -#. The main () -#. To translators: dialog label -#. To translators: ContinueCancel Popup headline -#: src/clients/common_cert.rb:56 src/clients/common_cert.rb:175 -#: src/include/ca-management/util.rb:1313 +#. The main () +#. To translators: dialog label +#. To translators: ContinueCancel Popup headline +#: src/clients/common_cert.rb:56 src/clients/common_cert.rb:175 +#: src/include/ca-management/util.rb:1313 msgid "Common Server Certificate" msgstr "일반 서버 인증서" -#. help text 1/8 -#: src/clients/common_cert.rb:77 -msgid "" -"<p>A Server Certificate is used by services which provide SSL/TLS encrypted " -"network connections.</p>" -msgstr "" -"<p>SSL/TLS 암호화 네트워크 연결을 제공하는 서비스에서 서버 인증서를 사용하고 " -"있습니다.</p>" +#. help text 1/8 +#: src/clients/common_cert.rb:77 +msgid "<p>A Server Certificate is used by services which provide SSL/TLS encrypted network connections.</p>" +msgstr "<p>SSL/TLS 암호화 네트워크 연결을 제공하는 서비스에서 서버 인증서를 사용하고 있습니다.</p>" -#. help text 2/8 -#: src/clients/common_cert.rb:84 -msgid "" -"<p>The purpose of the <b>Common Server Certificate</b> is, to provide a " -"certificate for several services running on this host. " -msgstr "" -"<p><b>일반 서버 인증서</b>의 목적은 이 호스트에서 실행 중인 서비스 일부에 대" -"한 인증서를 제공하는 것입니다. " +#. help text 2/8 +#: src/clients/common_cert.rb:84 +msgid "<p>The purpose of the <b>Common Server Certificate</b> is, to provide a certificate for several services running on this host. " +msgstr "<p><b>일반 서버 인증서</b>의 목적은 이 호스트에서 실행 중인 서비스 일부에 대한 인증서를 제공하는 것입니다. " -#. help text 3/8 -#: src/clients/common_cert.rb:92 -msgid "" -"Some YaST modules provide the capability to use this certificate during " -"configuration of such a service.</p>" -msgstr "" -"일부 YaST 모듈은 서비스 같은 것의 설정을 할 동안 이 인증서를 사용할 권리를 제" -"공합니다.</p>" +#. help text 3/8 +#: src/clients/common_cert.rb:92 +msgid "Some YaST modules provide the capability to use this certificate during configuration of such a service.</p>" +msgstr "일부 YaST 모듈은 서비스 같은 것의 설정을 할 동안 이 인증서를 사용할 권리를 제공합니다.</p>" -#. help text 4/8 -#: src/clients/common_cert.rb:100 -msgid "" -"<p>With the <b>Import/Replace</b> button you can add a new server " -"certificate or replace the current one.</p>" -msgstr "" -"<p><b>임포트/바꾸기</b> 버튼을 사용하면 새 서버 인증서를 추가하거나 현재 인증" -"서를 바꿀 수 있습니다.</p>" +#. help text 4/8 +#: src/clients/common_cert.rb:100 +msgid "<p>With the <b>Import/Replace</b> button you can add a new server certificate or replace the current one.</p>" +msgstr "<p><b>임포트/바꾸기</b> 버튼을 사용하면 새 서버 인증서를 추가하거나 현재 인증서를 바꿀 수 있습니다.</p>" -#. help text 5/8 -#: src/clients/common_cert.rb:108 -msgid "" -"<p>You can remove the Certificates by clicking the <b>Remove</b> button. But " -"make sure, that it is not used anymore by other services.</p>" -msgstr "" -"<p><b>제거</b> 버튼을 클릭해서 인증서를 제거할 수 있습니다. 하지만, 이것은 다" -"른 서비스 어느 곳에서도 사용되지 않습니다.</p>" +#. help text 5/8 +#: src/clients/common_cert.rb:108 +msgid "<p>You can remove the Certificates by clicking the <b>Remove</b> button. But make sure, that it is not used anymore by other services.</p>" +msgstr "<p><b>제거</b> 버튼을 클릭해서 인증서를 제거할 수 있습니다. 하지만, 이것은 다른 서비스 어느 곳에서도 사용되지 않습니다.</p>" -#. help text 6/8 -#: src/clients/common_cert.rb:116 -msgid "" -"<p>Certificates can be written to a file using <b>Export to File</b> in " -"section <b>Certificate</b> in the <b>CA Management</b> module.</p>" -msgstr "" -"<p><b>CA 관리</b> 모듈의 <b>인증서</b> 섹션에 있는 <b>파일로 엑스포트</b>를 " -"사용하여 인증서를 파일에 기록할 수 있습니다.</p>" +#. help text 6/8 +#: src/clients/common_cert.rb:116 +msgid "<p>Certificates can be written to a file using <b>Export to File</b> in section <b>Certificate</b> in the <b>CA Management</b> module.</p>" +msgstr "<p><b>CA 관리</b> 모듈의 <b>인증서</b> 섹션에 있는 <b>파일로 엑스포트</b>를 사용하여 인증서를 파일에 기록할 수 있습니다.</p>" -#. help text 7/8 -#: src/clients/common_cert.rb:124 -msgid "" -"<p>Certificates to import from disk must have been written in <b>PKCS12 " -"format with CA chain</b>.</p>" -msgstr "" -"<p>디스크에서 임포트한 인증서는 <b>CA 체인이 포함된 PKCS12 형식</b>으로 기록" -"되었어야 합니다.</p>" +#. help text 7/8 +#: src/clients/common_cert.rb:124 +msgid "<p>Certificates to import from disk must have been written in <b>PKCS12 format with CA chain</b>.</p>" +msgstr "<p>디스크에서 임포트한 인증서는 <b>CA 체인이 포함된 PKCS12 형식</b>으로 기록되었어야 합니다.</p>" -#. help text 8/8 -#: src/clients/common_cert.rb:132 +#. help text 8/8 +#: src/clients/common_cert.rb:132 msgid "<p>For more information, please read the manual.</p>" msgstr "<p>자세한 내용은 매뉴얼을 참조하십시오.</p>" -#. popup text -#: src/clients/common_cert.rb:154 +#. popup text +#: src/clients/common_cert.rb:154 msgid "" "<pre>Common Server Certificate not found.\n" "You can import a certificate from disk</pre>" @@ -742,34 +689,34 @@ "<pre>일반 서버 인증서를 찾을 수 없습니다.\n" "디스크에서 인증서를 임포트할 수 있습니다.</pre>" -#. popup window header -#. popup window header -#. popup window header -#. popup window header -#: src/clients/common_cert.rb:160 src/include/ca-management/ca.rb:141 -#: src/include/ca-management/certificate.rb:264 -#: src/include/ca-management/crl.rb:166 -#: src/include/ca-management/request.rb:238 +#. popup window header +#. popup window header +#. popup window header +#. popup window header +#: src/clients/common_cert.rb:160 src/include/ca-management/ca.rb:141 +#: src/include/ca-management/certificate.rb:264 +#: src/include/ca-management/crl.rb:166 +#: src/include/ca-management/request.rb:238 msgid "Description" msgstr "설명" -#. push button label -#: src/clients/common_cert.rb:167 +#. push button label +#: src/clients/common_cert.rb:167 msgid "&Remove" msgstr "제거(&E)" -#. push button label -#: src/clients/common_cert.rb:169 +#. push button label +#: src/clients/common_cert.rb:169 msgid "&Import/Replace" msgstr "가져오기/바꾸기(&I)" -#. To translators: warning popup yes/no question (1/3) -#: src/clients/common_cert.rb:209 +#. To translators: warning popup yes/no question (1/3) +#: src/clients/common_cert.rb:209 msgid "The certificate is not yet expired.\n" msgstr "인증서가 아직 만료되지 않았습니다.\n" -#. To translators: warning popup yes/no question (2/3) -#: src/clients/common_cert.rb:211 +#. To translators: warning popup yes/no question (2/3) +#: src/clients/common_cert.rb:211 msgid "" "Please make sure, that no service use this certificate anymore.\n" "\n" @@ -777,33 +724,29 @@ "이 인증서를 다른 서비스가 사용하지 않도록 하십시오.\n" "\n" -#. To translators: warning popup yes/no question (3/3) -#: src/clients/common_cert.rb:215 +#. To translators: warning popup yes/no question (3/3) +#: src/clients/common_cert.rb:215 msgid "Are you sure, that you want to remove the certificate?" msgstr "인증서를 삭제하시겠습니까?" -#. help text 1/2 -#: src/include/ca-management/ca.rb:66 +#. help text 1/2 +#: src/include/ca-management/ca.rb:66 msgid "<p>Here, see the most important values of the CA.</p>" msgstr "<p>여기서 CA의 가장 중요한 값을 볼 수 있습니다.</p>" -#. help text 2/2 -#: src/include/ca-management/ca.rb:70 -msgid "" -"<p>Special information about the current CA is provided by <b>Certificates, <b>CRL</b>, and <b>Advanced</b>.</p>" -msgstr "" -"<p>현재 CA에 대한 특수 정보는 <b>인증서</b>, <b>CRL</b> 및 <b>고급</b>에 의" -"해 제공됩니다.</p>" +#. help text 2/2 +#: src/include/ca-management/ca.rb:70 +msgid "<p>Special information about the current CA is provided by <b>Certificates</b>, <b>CRL</b>, and <b>Advanced</b>.</p>" +msgstr "<p>현재 CA에 대한 특수 정보는 <b>인증서</b>, <b>CRL</b> 및 <b>고급</b>에 의해 제공됩니다.</p>" -#. getDescriptionCA - description of a CA -#. @param CA name -#. @return a string with the CA description -#: src/include/ca-management/ca.rb:164 +#. getDescriptionCA - description of a CA +#. @param CA name +#. @return a string with the CA description +#: src/include/ca-management/ca.rb:164 msgid "<p><b> Description for %1 </b></p>" msgstr "<p><b> %1에 대한 설명 </b></p>" -#: src/include/ca-management/ca.rb:177 +#: src/include/ca-management/ca.rb:177 msgid "" "\n" "CA not found" @@ -811,13 +754,13 @@ "\n" "CA를 찾을 수 없습니다." -#: src/include/ca-management/ca.rb:183 +#: src/include/ca-management/ca.rb:183 msgid "<p><b>Issued For:</b></p>" msgstr "<p><b>발급 대상:</b></p>" -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/ca.rb:187 src/include/ca-management/ca.rb:224 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/ca.rb:187 src/include/ca-management/ca.rb:224 msgid "" "\n" "Common Name: " @@ -825,9 +768,9 @@ "\n" "일반 이름: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/ca.rb:192 src/include/ca-management/ca.rb:229 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/ca.rb:192 src/include/ca-management/ca.rb:229 msgid "" "\n" "Organization: " @@ -835,9 +778,9 @@ "\n" "조직: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/ca.rb:197 src/include/ca-management/ca.rb:234 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/ca.rb:197 src/include/ca-management/ca.rb:234 msgid "" "\n" "Location: " @@ -845,9 +788,9 @@ "\n" "위치: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/ca.rb:202 src/include/ca-management/ca.rb:239 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/ca.rb:202 src/include/ca-management/ca.rb:239 msgid "" "\n" "State: " @@ -855,9 +798,9 @@ "\n" "시/도: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/ca.rb:207 src/include/ca-management/ca.rb:244 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/ca.rb:207 src/include/ca-management/ca.rb:244 msgid "" "\n" "Country: " @@ -865,9 +808,9 @@ "\n" "국가: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/ca.rb:212 src/include/ca-management/ca.rb:249 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/ca.rb:212 src/include/ca-management/ca.rb:249 msgid "" "\n" "EMAIL: " @@ -875,11 +818,11 @@ "\n" "전자 메일: " -#: src/include/ca-management/ca.rb:220 +#: src/include/ca-management/ca.rb:220 msgid "<p><b>Issued By:</b></p>" msgstr "<p><b>발급자:</b></p>" -#: src/include/ca-management/ca.rb:256 +#: src/include/ca-management/ca.rb:256 msgid "" "\n" "Valid from: " @@ -887,7 +830,7 @@ "\n" "유효 기간 시작일:" -#: src/include/ca-management/ca.rb:260 +#: src/include/ca-management/ca.rb:260 msgid "" "\n" "Valid to: " @@ -895,274 +838,245 @@ "\n" "유효 기간 종료일:" -#. To translators: pushbutton label -#: src/include/ca-management/ca.rb:283 +#. To translators: pushbutton label +#: src/include/ca-management/ca.rb:283 msgid "&Advanced..." msgstr "고급(&A)" -#: src/include/ca-management/ca.rb:285 -#: src/include/ca-management/certificate.rb:476 -#: src/include/ca-management/crl.rb:261 -#: src/include/ca-management/request.rb:350 +#: src/include/ca-management/ca.rb:285 +#: src/include/ca-management/certificate.rb:476 +#: src/include/ca-management/crl.rb:261 +#: src/include/ca-management/request.rb:350 msgid "&View" msgstr "보기(&V)" -#: src/include/ca-management/ca.rb:286 +#: src/include/ca-management/ca.rb:286 msgid "&Change CA Password" msgstr "CA 비밀번호 변경(&C)" -#: src/include/ca-management/ca.rb:287 +#: src/include/ca-management/ca.rb:287 msgid "C&reate SubCA" msgstr "하위 CA 작성(&R)" -#: src/include/ca-management/ca.rb:288 +#: src/include/ca-management/ca.rb:288 msgid "Export to &File" msgstr "파일로 내보내기(&E)" -#: src/include/ca-management/ca.rb:289 +#: src/include/ca-management/ca.rb:289 msgid "Export to &LDAP" msgstr "LDAP로 엑스포트(&L)" -#: src/include/ca-management/ca.rb:290 +#: src/include/ca-management/ca.rb:290 msgid "&Edit Default" msgstr "기본값 편집(&E)" -#. help text 1/4 -#: src/include/ca-management/certDefault.rb:51 -msgid "" -"<p>When creating a new subCA or certificate, the system suggests some " -"default values.</p>" -msgstr "" -"<p>새 하위 CA 또는 인증서를 작성할 경우 시스템에서 몇몇 기본값을 제안합니다." -"</p>" +#. help text 1/4 +#: src/include/ca-management/certDefault.rb:51 +msgid "<p>When creating a new subCA or certificate, the system suggests some default values.</p>" +msgstr "<p>새 하위 CA 또는 인증서를 작성할 경우 시스템에서 몇몇 기본값을 제안합니다.</p>" -#. help text 2/4 -#: src/include/ca-management/certDefault.rb:57 +#. help text 2/4 +#: src/include/ca-management/certDefault.rb:57 msgid "<p>With this workflow, change these default settings.</p>" msgstr "<p>이 워크플로를 통해 이러한 기본 설정을 변경할 수 있습니다.</p>" -#. help text 3/4 -#. help text 3/3 -#: src/include/ca-management/certDefault.rb:62 -#: src/include/ca-management/crlDefault.rb:153 -msgid "" -"<p>However, the modified settings will be used for <b>new</B> entries only." +#. help text 3/4 +#. help text 3/3 +#: src/include/ca-management/certDefault.rb:62 +#: src/include/ca-management/crlDefault.rb:153 +msgid "<p>However, the modified settings will be used for <b>new</B> entries only.</p>" msgstr "<p>그러나 수정된 설정은 <b>새로운</B> 항목에 대해서만 사용됩니다.</p>" -#. help text 4/4 -#: src/include/ca-management/certDefault.rb:69 -msgid "" -"<p>You can edit the default settings for <b>subCAs</b>, <b>client " -"certificates</b>, and <b>server certificates</b>.</p>" -msgstr "" -"<p><b>하위 CA</b>, <b>클라이언트 인증서</b> 및 <b>서버 인증서</b>에 대한 기" -"본 설정을 편집할 수 있습니다.</p>" +#. help text 4/4 +#: src/include/ca-management/certDefault.rb:69 +msgid "<p>You can edit the default settings for <b>subCAs</b>, <b>client certificates</b>, and <b>server certificates</b>.</p>" +msgstr "<p><b>하위 CA</b>, <b>클라이언트 인증서</b> 및 <b>서버 인증서</b>에 대한 기본 설정을 편집할 수 있습니다.</p>" -#: src/include/ca-management/certDefault.rb:79 +#: src/include/ca-management/certDefault.rb:79 msgid "Default Settings for:" msgstr "기본 설정:" -#: src/include/ca-management/certDefault.rb:83 +#: src/include/ca-management/certDefault.rb:83 msgid "&Sub CA" msgstr "하위 CA(&S)" -#: src/include/ca-management/certDefault.rb:85 +#: src/include/ca-management/certDefault.rb:85 msgid "&Client Certificate" msgstr "클라이언트 인증서(&C)" -#: src/include/ca-management/certDefault.rb:88 +#: src/include/ca-management/certDefault.rb:88 msgid "S&erver Certificate" msgstr "서버 인증서(&S)" -#. help text 1/2 -#: src/include/ca-management/certDefault.rb:136 -msgid "" -"<p>This frame gives an overview of all default settings before they are " -"saved.</p>" +#. help text 1/2 +#: src/include/ca-management/certDefault.rb:136 +msgid "<p>This frame gives an overview of all default settings before they are saved.</p>" msgstr "<p>이 프레임에서는 저장 전 모든 기본 설정의 개요를 보여줍니다.</p>" -#. help text 2/2 -#: src/include/ca-management/certDefault.rb:142 +#. help text 2/2 +#: src/include/ca-management/certDefault.rb:142 msgid "<p>Click <b>Save</b> to finish the input.</p>" msgstr "<p>입력을 완료하려면 <b>저장</b>을 클릭하십시오.</p>" -#: src/include/ca-management/certDefault.rb:145 -#: src/include/ca-management/new_cert.rb:731 -#: src/include/ca-management/signRequest.rb:786 +#: src/include/ca-management/certDefault.rb:145 +#: src/include/ca-management/new_cert.rb:731 +#: src/include/ca-management/signRequest.rb:786 msgid "<p><b>Summary</b></p>" msgstr "<p><b>요약</b></p>" -#: src/include/ca-management/certDefault.rb:150 -#: src/include/ca-management/certDefault.rb:169 -#: src/include/ca-management/certDefault.rb:339 -#: src/include/ca-management/certDefault.rb:351 -#: src/include/ca-management/certDefault.rb:454 -#: src/include/ca-management/certDefault.rb:505 -#: src/include/ca-management/certDefault.rb:514 -#: src/include/ca-management/certDefault.rb:523 -#: src/include/ca-management/certDefault.rb:532 -#: src/include/ca-management/certDefault.rb:544 -#: src/include/ca-management/certDefault.rb:553 -#: src/include/ca-management/certDefault.rb:562 -#: src/include/ca-management/certDefault.rb:571 -#: src/include/ca-management/certDefault.rb:580 -#: src/include/ca-management/new_cert.rb:824 -#: src/include/ca-management/new_cert.rb:844 -#: src/include/ca-management/new_cert.rb:1023 -#: src/include/ca-management/new_cert.rb:1035 -#: src/include/ca-management/new_cert.rb:1138 -#: src/include/ca-management/new_cert.rb:1199 -#: src/include/ca-management/new_cert.rb:1208 -#: src/include/ca-management/new_cert.rb:1217 -#: src/include/ca-management/new_cert.rb:1226 -#: src/include/ca-management/new_cert.rb:1238 -#: src/include/ca-management/new_cert.rb:1247 -#: src/include/ca-management/new_cert.rb:1256 -#: src/include/ca-management/new_cert.rb:1265 -#: src/include/ca-management/new_cert.rb:1274 -#: src/include/ca-management/signRequest.rb:827 -#: src/include/ca-management/signRequest.rb:838 -#: src/include/ca-management/signRequest.rb:941 -#: src/include/ca-management/signRequest.rb:950 -#: src/include/ca-management/signRequest.rb:959 -#: src/include/ca-management/signRequest.rb:1048 -#: src/include/ca-management/signRequest.rb:1057 -#: src/include/ca-management/signRequest.rb:1069 -#: src/include/ca-management/signRequest.rb:1196 -#: src/include/ca-management/signRequest.rb:1205 -#: src/include/ca-management/signRequest.rb:1214 -#: src/include/ca-management/signRequest.rb:1223 +#: src/include/ca-management/certDefault.rb:150 +#: src/include/ca-management/certDefault.rb:169 +#: src/include/ca-management/certDefault.rb:339 +#: src/include/ca-management/certDefault.rb:351 +#: src/include/ca-management/certDefault.rb:454 +#: src/include/ca-management/certDefault.rb:505 +#: src/include/ca-management/certDefault.rb:514 +#: src/include/ca-management/certDefault.rb:523 +#: src/include/ca-management/certDefault.rb:532 +#: src/include/ca-management/certDefault.rb:544 +#: src/include/ca-management/certDefault.rb:553 +#: src/include/ca-management/certDefault.rb:562 +#: src/include/ca-management/certDefault.rb:571 +#: src/include/ca-management/certDefault.rb:580 +#: src/include/ca-management/new_cert.rb:824 +#: src/include/ca-management/new_cert.rb:844 +#: src/include/ca-management/new_cert.rb:1023 +#: src/include/ca-management/new_cert.rb:1035 +#: src/include/ca-management/new_cert.rb:1138 +#: src/include/ca-management/new_cert.rb:1199 +#: src/include/ca-management/new_cert.rb:1208 +#: src/include/ca-management/new_cert.rb:1217 +#: src/include/ca-management/new_cert.rb:1226 +#: src/include/ca-management/new_cert.rb:1238 +#: src/include/ca-management/new_cert.rb:1247 +#: src/include/ca-management/new_cert.rb:1256 +#: src/include/ca-management/new_cert.rb:1265 +#: src/include/ca-management/new_cert.rb:1274 +#: src/include/ca-management/signRequest.rb:827 +#: src/include/ca-management/signRequest.rb:838 +#: src/include/ca-management/signRequest.rb:941 +#: src/include/ca-management/signRequest.rb:950 +#: src/include/ca-management/signRequest.rb:959 +#: src/include/ca-management/signRequest.rb:1048 +#: src/include/ca-management/signRequest.rb:1057 +#: src/include/ca-management/signRequest.rb:1069 +#: src/include/ca-management/signRequest.rb:1196 +#: src/include/ca-management/signRequest.rb:1205 +#: src/include/ca-management/signRequest.rb:1214 +#: src/include/ca-management/signRequest.rb:1223 msgid " (critical)\n" msgstr " (중요)\n" -#: src/include/ca-management/certDefault.rb:156 +#: src/include/ca-management/certDefault.rb:156 msgid "Path Length: " msgstr "경로 길이:" -#: src/include/ca-management/certDefault.rb:177 -#: src/include/ca-management/certDefault.rb:462 -#: src/include/ca-management/new_cert.rb:861 -#: src/include/ca-management/new_cert.rb:1147 -#: src/include/ca-management/signRequest.rb:966 -#: src/include/ca-management/signRequest.rb:1006 +#: src/include/ca-management/certDefault.rb:177 +#: src/include/ca-management/certDefault.rb:462 +#: src/include/ca-management/new_cert.rb:861 +#: src/include/ca-management/new_cert.rb:1147 +#: src/include/ca-management/signRequest.rb:966 +#: src/include/ca-management/signRequest.rb:1006 msgid "(critical) " msgstr "(중요)" -#: src/include/ca-management/certDefault.rb:182 -#: src/include/ca-management/new_cert.rb:866 -#: src/include/ca-management/new_cert_items.rb:266 -#: src/include/ca-management/signRequest.rb:1011 +#: src/include/ca-management/certDefault.rb:182 +#: src/include/ca-management/new_cert.rb:866 +#: src/include/ca-management/new_cert_items.rb:266 +#: src/include/ca-management/signRequest.rb:1011 msgid "Copy Subject Alt Name from CA" msgstr "CA에서 주체 대체 이름 복사" -#: src/include/ca-management/certDefault.rb:224 -#: src/include/ca-management/new_cert.rb:908 -#: src/include/ca-management/signRequest.rb:1082 +#: src/include/ca-management/certDefault.rb:224 +#: src/include/ca-management/new_cert.rb:908 +#: src/include/ca-management/signRequest.rb:1082 msgid "(critical)\n" msgstr "(중요)\n" -#: src/include/ca-management/certDefault.rb:336 -#: src/include/ca-management/new_cert.rb:1020 -#: src/include/ca-management/signRequest.rb:824 +#: src/include/ca-management/certDefault.rb:336 +#: src/include/ca-management/new_cert.rb:1020 +#: src/include/ca-management/signRequest.rb:824 msgid "nsComment: " msgstr "nsComment:" -#: src/include/ca-management/certDefault.rb:350 -#: src/include/ca-management/new_cert.rb:1034 -#: src/include/ca-management/signRequest.rb:837 +#: src/include/ca-management/certDefault.rb:350 +#: src/include/ca-management/new_cert.rb:1034 +#: src/include/ca-management/signRequest.rb:837 msgid "nsCertType: " msgstr "nsCertType:" -#: src/include/ca-management/certDefault.rb:467 -#: src/include/ca-management/new_cert.rb:1152 -#: src/include/ca-management/new_cert_items.rb:522 -#: src/include/ca-management/signRequest.rb:971 +#: src/include/ca-management/certDefault.rb:467 +#: src/include/ca-management/new_cert.rb:1152 +#: src/include/ca-management/new_cert_items.rb:522 +#: src/include/ca-management/signRequest.rb:971 msgid "Copy Standard E-Mail Address" msgstr "표준 전자 메일 주소 복사" -#. To translators: dialog label -#: src/include/ca-management/certDefault.rb:591 +#. To translators: dialog label +#: src/include/ca-management/certDefault.rb:591 msgid "Save Settings (step 3/3)" msgstr "설정 저장(3/3 단계)" -#. creating new certificate -#: src/include/ca-management/certDefault.rb:609 +#. creating new certificate +#: src/include/ca-management/certDefault.rb:609 msgid "Default has been saved." msgstr "기본값이 저장되었습니다." -#. help text 1/6 -#: src/include/ca-management/certificate.rb:46 -msgid "" -"<p>First, see a list view with all available certificates from this CA. The " -"columns are the DN of the certificates including the e-mail address and the " -"state of the certificate (such as valid or revoked).</p>" -msgstr "" -"<p>먼저 이 CA에서 사용할 수 있는 모든 인증서가 포함된 목록을 볼 수 있습니다. " -"각 열은 전자 메일 주소 및 인증서 상태(유효 또는 해지 등)가 포함된 인증서의 DN" -"입니다.</p>" +#. help text 1/6 +#: src/include/ca-management/certificate.rb:46 +msgid "<p>First, see a list view with all available certificates from this CA. The columns are the DN of the certificates including the e-mail address and the state of the certificate (such as valid or revoked).</p>" +msgstr "<p>먼저 이 CA에서 사용할 수 있는 모든 인증서가 포함된 목록을 볼 수 있습니다. 각 열은 전자 메일 주소 및 인증서 상태(유효 또는 해지 등)가 포함된 인증서의 DN입니다.</p>" -#. help text 2/6 -#: src/include/ca-management/certificate.rb:52 +#. help text 2/6 +#: src/include/ca-management/certificate.rb:52 msgid "<p>Select one of the certificates and execute some actions.</p>" msgstr "<p>인증서 중 하나를 선택하고 몇 가지 동작을 수행합니다.</p>" -#. help text 3/6 -#: src/include/ca-management/certificate.rb:57 -msgid "" -"<p><b>View</b> opens a window with a text representation of the complete " -"certificate.</p>" +#. help text 3/6 +#: src/include/ca-management/certificate.rb:57 +msgid "<p><b>View</b> opens a window with a text representation of the complete certificate.</p>" msgstr "<p><b>보기</b>는 완전한 인증서를 텍스트로 표현하는 창을 엽니다.</p>" -#. help text 4/6 -#: src/include/ca-management/certificate.rb:64 -msgid "" -"<p>Furthermore, you can <b>Revoke</b>, <b>Delete</b>, or <b>Export</b> a " -"certificate.</p>" -msgstr "" -"<p>또한 인증서의 <b>해지</b>, <b>삭제</b> 또는 <b>엑스포트</b>도 가능합니다." -"</p>" +#. help text 4/6 +#: src/include/ca-management/certificate.rb:64 +msgid "<p>Furthermore, you can <b>Revoke</b>, <b>Delete</b>, or <b>Export</b> a certificate.</p>" +msgstr "<p>또한 인증서의 <b>해지</b>, <b>삭제</b> 또는 <b>엑스포트</b>도 가능합니다.</p>" -#. help text 5/6 -#: src/include/ca-management/certificate.rb:71 +#. help text 5/6 +#: src/include/ca-management/certificate.rb:71 msgid "<p>With <b>Add</b>, generate a new server or client certificate.</p>" -msgstr "" -"<p><b>추가</b>를 사용하면 새로운 서버 또는 클라이언트 인증서를 생성할 수 있습" -"니다.</p>" +msgstr "<p><b>추가</b>를 사용하면 새로운 서버 또는 클라이언트 인증서를 생성할 수 있습니다.</p>" -#. help text 6/6 -#: src/include/ca-management/certificate.rb:78 -msgid "" -"<p>In the area below, see the most important values of the selected " -"certificate.</p>" -msgstr "" -"<p>아래 영역에서는 선택한 인증서의 가장 중요한 값을 볼 수 있습니다.</p>" +#. help text 6/6 +#: src/include/ca-management/certificate.rb:78 +msgid "<p>In the area below, see the most important values of the selected certificate.</p>" +msgstr "<p>아래 영역에서는 선택한 인증서의 가장 중요한 값을 볼 수 있습니다.</p>" -#. popup window header -#: src/include/ca-management/certificate.rb:142 +#. popup window header +#: src/include/ca-management/certificate.rb:142 msgid "Revoke Certificate" msgstr "인증서 해지" -#: src/include/ca-management/certificate.rb:145 +#: src/include/ca-management/certificate.rb:145 msgid "You are only revoking the certificate. No new CRL will be created." msgstr "인증서를 해지하려고 합니다. 새 CRL이 작성되지 않습니다." -#: src/include/ca-management/certificate.rb:150 +#: src/include/ca-management/certificate.rb:150 msgid "Reasons" msgstr "이유" -#. getCertDescription - description of a certificate -#. @param map of description -#. @return a string with the certification description -#. getRequestDescription - description of a request -#. @param map of description, onlySubject -#. @return a string with the request description -#: src/include/ca-management/certificate.rb:288 -#: src/include/ca-management/signRequest.rb:55 +#. getCertDescription - description of a certificate +#. @param map of description +#. @return a string with the certification description +#. getRequestDescription - description of a request +#. @param map of description, onlySubject +#. @return a string with the request description +#: src/include/ca-management/certificate.rb:288 +#: src/include/ca-management/signRequest.rb:55 msgid "<p><b>Description</b></p>" msgstr "<p><b>설명</b></p>" -#: src/include/ca-management/certificate.rb:291 +#: src/include/ca-management/certificate.rb:291 msgid "" "\n" "Certificate not found" @@ -1170,10 +1084,10 @@ "\n" "인증서를 찾을 수 없습니다." -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:302 -#: src/include/ca-management/signRequest.rb:65 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:302 +#: src/include/ca-management/signRequest.rb:65 msgid "" "\n" "Common Name: " @@ -1181,10 +1095,10 @@ "\n" "일반 이름: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:307 -#: src/include/ca-management/signRequest.rb:80 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:307 +#: src/include/ca-management/signRequest.rb:80 msgid "" "\n" "Organization: " @@ -1192,10 +1106,10 @@ "\n" "조직: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:312 -#: src/include/ca-management/signRequest.rb:85 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:312 +#: src/include/ca-management/signRequest.rb:85 msgid "" "\n" "Location: " @@ -1203,10 +1117,10 @@ "\n" "위치: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:317 -#: src/include/ca-management/signRequest.rb:90 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:317 +#: src/include/ca-management/signRequest.rb:90 msgid "" "\n" "State: " @@ -1214,10 +1128,10 @@ "\n" "시/도: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:322 -#: src/include/ca-management/signRequest.rb:95 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:322 +#: src/include/ca-management/signRequest.rb:95 msgid "" "\n" "Country: " @@ -1225,10 +1139,10 @@ "\n" "국가: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:327 -#: src/include/ca-management/signRequest.rb:100 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:327 +#: src/include/ca-management/signRequest.rb:100 msgid "" "\n" "EMAIL: " @@ -1236,10 +1150,10 @@ "\n" "전자 메일: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:333 -#: src/include/ca-management/signRequest.rb:107 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:333 +#: src/include/ca-management/signRequest.rb:107 msgid "" "\n" "Is CA: " @@ -1247,10 +1161,10 @@ "\n" "CA: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:338 -#: src/include/ca-management/signRequest.rb:112 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:338 +#: src/include/ca-management/signRequest.rb:112 msgid "" "\n" "Key Size: " @@ -1258,8 +1172,8 @@ "\n" "키 크기: " -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:343 +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:343 msgid "" "\n" "Serialnumber: " @@ -1267,10 +1181,10 @@ "\n" "일련번호: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:348 -#: src/include/ca-management/signRequest.rb:117 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:348 +#: src/include/ca-management/signRequest.rb:117 msgid "" "\n" "Version: " @@ -1278,8 +1192,8 @@ "\n" "버전: " -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:353 +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:353 msgid "" "\n" "Valid from: " @@ -1287,8 +1201,8 @@ "\n" "유효 기간 시작일:" -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:358 +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:358 msgid "" "\n" "Valid to: " @@ -1296,10 +1210,10 @@ "\n" "유효 기간 종료일:" -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:363 -#: src/include/ca-management/signRequest.rb:122 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:363 +#: src/include/ca-management/signRequest.rb:122 msgid "" "\n" "algo. of pub. Key : " @@ -1307,10 +1221,10 @@ "\n" "공개 키 알고리즘: " -#. Preformated Text: take care that all translations have the same length -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/certificate.rb:368 -#: src/include/ca-management/signRequest.rb:127 +#. Preformated Text: take care that all translations have the same length +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/certificate.rb:368 +#: src/include/ca-management/signRequest.rb:127 msgid "" "\n" "algo. of signature: " @@ -1318,130 +1232,130 @@ "\n" "서명 알고리즘: " -#. Certificate status displayed in a table (Valid, Revoked, Expired) -#. Initialize the tab of the dialog -#: src/include/ca-management/certificate.rb:403 -#: src/include/ca-management/certificate.rb:532 +#. Certificate status displayed in a table (Valid, Revoked, Expired) +#. Initialize the tab of the dialog +#: src/include/ca-management/certificate.rb:403 +#: src/include/ca-management/certificate.rb:532 msgid "Valid" msgstr "유효함" -#. Certificate status displayed in a table (Valid, Revoked, Expired) -#: src/include/ca-management/certificate.rb:406 +#. Certificate status displayed in a table (Valid, Revoked, Expired) +#: src/include/ca-management/certificate.rb:406 msgid "Revoked" msgstr "해지" -#. Certificate status displayed in a table (Valid, Revoked, Expired) -#: src/include/ca-management/certificate.rb:410 +#. Certificate status displayed in a table (Valid, Revoked, Expired) +#: src/include/ca-management/certificate.rb:410 msgid "Expired" msgstr "만료됨" -#. To translators: table headers -#: src/include/ca-management/certificate.rb:453 +#. To translators: table headers +#: src/include/ca-management/certificate.rb:453 msgid "Status" msgstr "상태" -#: src/include/ca-management/certificate.rb:455 -#: src/include/ca-management/request.rb:320 +#: src/include/ca-management/certificate.rb:455 +#: src/include/ca-management/request.rb:320 msgid "E-Mail Address" msgstr "전자 메일 주소(&M)" -#: src/include/ca-management/certificate.rb:470 -#: src/include/ca-management/request.rb:338 +#: src/include/ca-management/certificate.rb:470 +#: src/include/ca-management/request.rb:338 msgid "Add" msgstr "추가" -#: src/include/ca-management/certificate.rb:472 +#: src/include/ca-management/certificate.rb:472 msgid "Add Server Certificate" msgstr "서버 인증서 추가" -#: src/include/ca-management/certificate.rb:473 +#: src/include/ca-management/certificate.rb:473 msgid "Add Client Certificate" msgstr "클라이언트 인증서 추가" -#: src/include/ca-management/certificate.rb:477 -#: src/include/ca-management/request.rb:351 +#: src/include/ca-management/certificate.rb:477 +#: src/include/ca-management/request.rb:351 msgid "&Change Password" msgstr "비밀번호 변경(&C)" -#: src/include/ca-management/certificate.rb:478 +#: src/include/ca-management/certificate.rb:478 msgid "&Revoke" msgstr "해지(&R)" -#: src/include/ca-management/certificate.rb:479 -#: src/include/ca-management/request.rb:361 +#: src/include/ca-management/certificate.rb:479 +#: src/include/ca-management/request.rb:361 msgid "&Delete" msgstr "삭제(&D)" -#. Fate (#2613) -#: src/include/ca-management/certificate.rb:483 -#: src/include/ca-management/crl.rb:265 +#. Fate (#2613) +#: src/include/ca-management/certificate.rb:483 +#: src/include/ca-management/crl.rb:265 msgid "Export" msgstr "엑스포트(&E)" -#: src/include/ca-management/certificate.rb:485 -#: src/include/ca-management/request.rb:362 +#: src/include/ca-management/certificate.rb:485 +#: src/include/ca-management/request.rb:362 msgid "Export to File" msgstr "파일로 내보내기(&E)" -#. popup window header -#: src/include/ca-management/certificate.rb:486 -#: src/include/ca-management/crlExport.rb:507 -#: src/include/ca-management/util.rb:494 +#. popup window header +#: src/include/ca-management/certificate.rb:486 +#: src/include/ca-management/crlExport.rb:507 +#: src/include/ca-management/util.rb:494 msgid "Export to LDAP" msgstr "LDAP로 엑스포트" -#: src/include/ca-management/certificate.rb:487 +#: src/include/ca-management/certificate.rb:487 msgid "Export as Common Server Certificate" msgstr "일반 서버 인증서로 엑스포트" -#: src/include/ca-management/certificate.rb:586 +#: src/include/ca-management/certificate.rb:586 msgid "Delete current certificate?" msgstr "현재 인증서를 삭제하시겠습니까?" -#. Create a certificate via command line -#. @param option map -#. @return success -#: src/include/ca-management/commandline.rb:106 +#. Create a certificate via command line +#. @param option map +#. @return success +#: src/include/ca-management/commandline.rb:106 msgid "Wrong kind of certificate." msgstr "잘못된 유형의 인증서입니다." -#. help text 1/4 -#: src/include/ca-management/crl.rb:55 +#. help text 1/4 +#: src/include/ca-management/crl.rb:55 msgid "<p>Here, see the most important values of the CRL.</p>" msgstr "<p>여기서 CRL의 가장 중요한 값을 볼 수 있습니다.</p>" -#. help text 2/4 -#: src/include/ca-management/crl.rb:59 +#. help text 2/4 +#: src/include/ca-management/crl.rb:59 msgid "<p>With <b>Generate CRL</b>, a new CRL will be generated.</p>" msgstr "<p><b>CRL 생성</b>을 사용하면 새 CRL을 생성할 수 있습니다.</p>" -#. help text 3/4 -#: src/include/ca-management/crl.rb:64 +#. help text 3/4 +#: src/include/ca-management/crl.rb:64 msgid "<p><b>View</b> shows a complete description.</p>" msgstr "<p><b>보기</b>를 사용하면 완전한 설명을 볼 수 있습니다.</p>" -#. help text 4/4 -#: src/include/ca-management/crl.rb:69 +#. help text 4/4 +#: src/include/ca-management/crl.rb:69 msgid "<p>You can <b>Export</b> the CRL to a file or LDAP Directory.</p>" msgstr "<p>CRL을 파일 또는 LDAP 디렉토리로 <b>엑스포트</b>할 수 있습니다.</p>" -#. popup window header -#: src/include/ca-management/crl.rb:95 +#. popup window header +#: src/include/ca-management/crl.rb:95 msgid "Generate New CRL" msgstr "새 CRL 생성" -#: src/include/ca-management/crl.rb:99 +#: src/include/ca-management/crl.rb:99 msgid "&Valid to (days):" msgstr "유효 기간 끝(일)(&V):" -#. getDescription - CRL description -#. @param CA name -#. @return a string with the CRL description -#: src/include/ca-management/crl.rb:210 +#. getDescription - CRL description +#. @param CA name +#. @return a string with the CRL description +#: src/include/ca-management/crl.rb:210 msgid "<p><b>Certificate Revocation List (CRL):</b></p>" msgstr "<p><b>인증서 해지 목록(CRL):</b></p>" -#: src/include/ca-management/crl.rb:225 +#: src/include/ca-management/crl.rb:225 msgid "" "\n" "\n" @@ -1451,7 +1365,7 @@ "\n" " 최종 업데이트: " -#: src/include/ca-management/crl.rb:229 +#: src/include/ca-management/crl.rb:229 msgid "" "\n" "Next Update: " @@ -1459,7 +1373,7 @@ "\n" "다음 업데이트" -#: src/include/ca-management/crl.rb:234 +#: src/include/ca-management/crl.rb:234 msgid "" "\n" "\n" @@ -1469,642 +1383,548 @@ "\n" " 해지된 인증서: " -#. Dialog Tab - CRL - -#. @return [Yast::Term] for the CRL of a selected CA -#: src/include/ca-management/crl.rb:260 +#. Dialog Tab - CRL - +#. @return [Yast::Term] for the CRL of a selected CA +#: src/include/ca-management/crl.rb:260 msgid "&Generate CRL" msgstr "CRL 생성(&G)" -#: src/include/ca-management/crl.rb:262 -#: src/include/ca-management/new_cert_advanced.rb:129 +#: src/include/ca-management/crl.rb:262 +#: src/include/ca-management/new_cert_advanced.rb:129 msgid "&Default" msgstr "기본(&D)" -#. help text 1/3 -#: src/include/ca-management/crlDefault.rb:142 -msgid "" -"<p>When creating a new CRL, the system suggests some default values.</p>" +#. help text 1/3 +#: src/include/ca-management/crlDefault.rb:142 +msgid "<p>When creating a new CRL, the system suggests some default values.</p>" msgstr "<p>새 CRL을 작성할 경우 시스템에서 몇몇 기본값을 제안합니다.</p>" -#. help text 2/3 -#: src/include/ca-management/crlDefault.rb:148 +#. help text 2/3 +#: src/include/ca-management/crlDefault.rb:148 msgid "<p>With this frame, change these default settings.</p>" msgstr "<p>이 프레임을 통해 이러한 기본 설정을 변경할 수 있습니다.</p>" -#: src/include/ca-management/crlDefault.rb:164 -#: src/include/ca-management/new_cert.rb:602 -#: src/include/ca-management/signRequest.rb:724 +#: src/include/ca-management/crlDefault.rb:164 +#: src/include/ca-management/new_cert.rb:602 +#: src/include/ca-management/signRequest.rb:724 msgid "&Valid Period (days):" msgstr "유효 기간(일)(&V):" -#: src/include/ca-management/crlDefault.rb:179 +#: src/include/ca-management/crlDefault.rb:179 msgid "&Critical" msgstr "중요(&C)" -#: src/include/ca-management/crlDefault.rb:200 +#: src/include/ca-management/crlDefault.rb:200 msgid "C&ritical" msgstr "중요(&R)" -#: src/include/ca-management/crlDefault.rb:207 +#: src/include/ca-management/crlDefault.rb:207 msgid "C&opy Subject Alternative Name from CA" msgstr "CA에서 주체 대체 이름 복사(&O)" -#: src/include/ca-management/crlDefault.rb:254 +#: src/include/ca-management/crlDefault.rb:254 msgid "Default CRL Settings" msgstr "기본 CRL 설정" -#. Translators: window caption -#: src/include/ca-management/crlExport.rb:108 +#. Translators: window caption +#: src/include/ca-management/crlExport.rb:108 msgid "Security Information" msgstr "보안 정보" -#. Translators: long help text - security information -#: src/include/ca-management/crlExport.rb:111 -msgid "" -"Warning!<br>Activating the automatic creation and export of a CRL will write " -"the CA password to a configuration file on disk. The password will be stored " -"there in plain text as it is needed to create a CRL. The file will only be " -"readable for the root user." -msgstr "" -"경고!<br>자동 생성을 활성화하고 CRL을 내보내면 CA 비밀번호가 디스크의 구성 파" -"일에 작성됩니다. 비밀번호는 CRL 생성에 필요하기 때문에 일반 텍스트로 해당 위" -"치에 저장됩니다. root 사용자만 이 파일을 읽을 수 있습니다." +#. Translators: long help text - security information +#: src/include/ca-management/crlExport.rb:111 +msgid "Warning!<br>Activating the automatic creation and export of a CRL will write the CA password to a configuration file on disk. The password will be stored there in plain text as it is needed to create a CRL. The file will only be readable for the root user." +msgstr "경고!<br>자동 생성을 활성화하고 CRL을 내보내면 CA 비밀번호가 디스크의 구성 파일에 작성됩니다. 비밀번호는 CRL 생성에 필요하기 때문에 일반 텍스트로 해당 위치에 저장됩니다. root 사용자만 이 파일을 읽을 수 있습니다." -#. Editing CRL defaults of a selected CA -#. @param selected CA -#: src/include/ca-management/crlExport.rb:372 -#: src/include/ca-management/crlExport.rb:522 +#. Editing CRL defaults of a selected CA +#. @param selected CA +#: src/include/ca-management/crlExport.rb:372 +#: src/include/ca-management/crlExport.rb:522 msgid "Export CRL" msgstr "CRL 내보내기" -#. this default can only be set inside this function -#: src/include/ca-management/crlExport.rb:381 +#. this default can only be set inside this function +#: src/include/ca-management/crlExport.rb:381 msgid "<p>Export the CRL of this CA once by selecting <b>Export once</b>.</p>" msgstr "<p><b>한 번 내보내기</b>를 선택한 후 이 CA의 CRL을 내보냅니다.</p>" -#: src/include/ca-management/crlExport.rb:384 -msgid "" -"<p>To set up a repeated recreation of the CRL, select <b>Repeated recreation " -"and export</b>. In this case, set the interval for the recreation in " -"<b>Periodic interval</b>. If you set the interval to 24 hours, you can " -"additionally select the hour for the export. Make sure you read and " -"understand the <b>Security Information</b>.</p>" -msgstr "" -"<p>CRL 반복 재생성을 설정하려면 <b>반복 재생성 및 엑스포트</b>를 선택하십시" -"오. 이 경우 <b>정기 간격</b>에서 재생성 간격을 설정하십시오. 간격을 24시간으" -"로 설정하는 경우 엑스포트 시간을 추가로 선택할 수 있습니다. <b>보안 정보</b>" -"를 읽고 이해해야 합니다.</p>" +#: src/include/ca-management/crlExport.rb:384 +msgid "<p>To set up a repeated recreation of the CRL, select <b>Repeated recreation and export</b>. In this case, set the interval for the recreation in <b>Periodic interval</b>. If you set the interval to 24 hours, you can additionally select the hour for the export. Make sure you read and understand the <b>Security Information</b>.</p>" +msgstr "<p>CRL 반복 재생성을 설정하려면 <b>반복 재생성 및 엑스포트</b>를 선택하십시오. 이 경우 <b>정기 간격</b>에서 재생성 간격을 설정하십시오. 간격을 24시간으로 설정하는 경우 엑스포트 시간을 추가로 선택할 수 있습니다. <b>보안 정보</b>를 읽고 이해해야 합니다.</p>" -#: src/include/ca-management/crlExport.rb:387 -msgid "" -"<p>You can activate an export of the CRL to a local file or to an LDAP " -"server or both. Set up the respective parameters in <b>Export to local file and <b>Export to LDAP</b>.</p>" -msgstr "" -"<p>CRL을 로컬 파일이나 LDAP 서버로 엑스포트하거나 둘 다로 엑스포트할 수 있습" -"니다. <b>로컬 파일로 엑스포트</b> 및 <b>LDAP으로 엑스포트</b>에서 각 파라미터" -"를 설정하십시오.</p>" +#: src/include/ca-management/crlExport.rb:387 +msgid "<p>You can activate an export of the CRL to a local file or to an LDAP server or both. Set up the respective parameters in <b>Export to local file</b> and <b>Export to LDAP</b>.</p>" +msgstr "<p>CRL을 로컬 파일이나 LDAP 서버로 엑스포트하거나 둘 다로 엑스포트할 수 있습니다. <b>로컬 파일로 엑스포트</b> 및 <b>LDAP으로 엑스포트</b>에서 각 파라미터를 설정하십시오.</p>" -#: src/include/ca-management/crlExport.rb:401 +#: src/include/ca-management/crlExport.rb:401 msgid "Export once" msgstr "한 번 내보내기" -#: src/include/ca-management/crlExport.rb:407 +#: src/include/ca-management/crlExport.rb:407 msgid "Repeated recreation and export" msgstr "반복 재생성 및 내보내기" -#. fix space issue (bnc#446137) -#: src/include/ca-management/crlExport.rb:419 -#: src/include/ca-management/util.rb:496 +#. fix space issue (bnc#446137) +#: src/include/ca-management/crlExport.rb:419 +#: src/include/ca-management/util.rb:496 msgid "&Host Name:" msgstr "호스트 이름:" -#: src/include/ca-management/crlExport.rb:420 -#: src/include/ca-management/util.rb:497 +#: src/include/ca-management/crlExport.rb:420 +#: src/include/ca-management/util.rb:497 msgid "&Port:" msgstr "포트(&P)" -#: src/include/ca-management/crlExport.rb:421 -#: src/include/ca-management/util.rb:498 +#: src/include/ca-management/crlExport.rb:421 +#: src/include/ca-management/util.rb:498 msgid "&DN:" msgstr "DN" -#: src/include/ca-management/crlExport.rb:426 -#: src/include/ca-management/util.rb:499 +#: src/include/ca-management/crlExport.rb:426 +#: src/include/ca-management/util.rb:499 msgid "&Bind DN:" msgstr "DN 바인딩(&B):" -#: src/include/ca-management/crlExport.rb:427 +#: src/include/ca-management/crlExport.rb:427 msgid "Pass&word" msgstr "비밀번호" -#: src/include/ca-management/crlExport.rb:435 +#: src/include/ca-management/crlExport.rb:435 msgid "Save &as" msgstr "다른 이름으로 저장(&A)" -#: src/include/ca-management/crlExport.rb:442 -#: src/include/ca-management/util.rb:628 -#: src/include/ca-management/util.rb:853 -#: src/include/ca-management/util.rb:965 +#: src/include/ca-management/crlExport.rb:442 +#: src/include/ca-management/util.rb:628 src/include/ca-management/util.rb:853 +#: src/include/ca-management/util.rb:965 msgid "Export Format" msgstr "엑스포트 형식" -#: src/include/ca-management/crlExport.rb:443 +#: src/include/ca-management/crlExport.rb:443 msgid "PEM Format" msgstr "PEM 형식" -#: src/include/ca-management/crlExport.rb:444 +#: src/include/ca-management/crlExport.rb:444 msgid "DER Format" msgstr "DER 형식" -#: src/include/ca-management/crlExport.rb:453 +#: src/include/ca-management/crlExport.rb:453 msgid "Periodic interval" msgstr "주기적 간격" -#. `HSquash( `IntField( `id(`interval_days), "&days", 0, 100, 30 )), -#. Translators: this is used to express a setting of "every XX hour(s)" -#: src/include/ca-management/crlExport.rb:457 +#. `HSquash( `IntField( `id(`interval_days), "&days", 0, 100, 30 )), +#. Translators: this is used to express a setting of "every XX hour(s)" +#: src/include/ca-management/crlExport.rb:457 msgid "every" msgstr "매" -#. Translators: this is used to express a setting of "every XX hour(s)" -#: src/include/ca-management/crlExport.rb:463 +#. Translators: this is used to express a setting of "every XX hour(s)" +#: src/include/ca-management/crlExport.rb:463 msgid "&hour(s)" msgstr "시(&H)" -#. (bnc#446137) -#. Translators: in case "every XX hour(s)" is set to 24, the user can set "at XX o'clock" -#: src/include/ca-management/crlExport.rb:472 +#. (bnc#446137) +#. Translators: in case "every XX hour(s)" is set to 24, the user can set "at XX o'clock" +#: src/include/ca-management/crlExport.rb:472 msgid "at" msgstr "시간" -#. Translators: in case "every XX hour(s)" is set to 24, the user can set "at XX o'clock" -#: src/include/ca-management/crlExport.rb:474 +#. Translators: in case "every XX hour(s)" is set to 24, the user can set "at XX o'clock" +#: src/include/ca-management/crlExport.rb:474 msgid "&o'clock" msgstr "정각(&O)" -#. (bnc#446137) -#: src/include/ca-management/crlExport.rb:479 +#. (bnc#446137) +#: src/include/ca-management/crlExport.rb:479 msgid "&Security Information" msgstr "보안 정보(&S)" -#: src/include/ca-management/crlExport.rb:497 +#: src/include/ca-management/crlExport.rb:497 msgid "Export to file" msgstr "파일로 내보내기(&E)" -#. gray out or ungray UI elements -#. Popup::Error(_("Currently not supported.")); -#: src/include/ca-management/crlExport.rb:543 -#: src/include/ca-management/request.rb:455 +#. gray out or ungray UI elements +#. Popup::Error(_("Currently not supported.")); +#: src/include/ca-management/crlExport.rb:543 +#: src/include/ca-management/request.rb:455 msgid "Save as" msgstr "다른 이름으로 저장(&S)" -#: src/include/ca-management/crlExport.rb:647 +#: src/include/ca-management/crlExport.rb:647 msgid "Export to file failed." msgstr "파일로 엑스포트에 실패했습니다." -#: src/include/ca-management/crlExport.rb:648 -#: src/include/ca-management/crlExport.rb:673 +#: src/include/ca-management/crlExport.rb:648 +#: src/include/ca-management/crlExport.rb:673 msgid "Do you want to retry?" msgstr "다시 시도하시겠습니까?" -#: src/include/ca-management/crlExport.rb:653 -#: src/include/ca-management/request.rb:468 +#: src/include/ca-management/crlExport.rb:653 +#: src/include/ca-management/request.rb:468 msgid "Saved to file successfully." msgstr "파일에 저장했습니다." -#. Checking error -#: src/include/ca-management/crlExport.rb:669 -#: src/include/ca-management/util.rb:603 +#. Checking error +#: src/include/ca-management/crlExport.rb:669 +#: src/include/ca-management/util.rb:603 msgid "Saved to LDAP successfully." msgstr "LDAP에 성공적으로 저장했습니다." -#: src/include/ca-management/crlExport.rb:672 +#: src/include/ca-management/crlExport.rb:672 msgid "Export to LDAP failed." msgstr "LDAP로 엑스포트에 실패했습니다." -#. When no dialog defined for this tab (software error) -#: src/include/ca-management/dialog-ca.rb:86 +#. When no dialog defined for this tab (software error) +#: src/include/ca-management/dialog-ca.rb:86 msgid "Software error - Unknown Tab" msgstr "소프트웨어 오류 - 알 수 없는 탭" -#. Dialog Caption - Expert Settings - Zone Editor -#: src/include/ca-management/dialog-ca.rb:141 +#. Dialog Caption - Expert Settings - Zone Editor +#: src/include/ca-management/dialog-ca.rb:141 msgid "Certificate Authority (CA)" msgstr "인증 기관(CA)" -#. Menu Item - CA - Tab -#: src/include/ca-management/dialog-ca.rb:147 +#. Menu Item - CA - Tab +#: src/include/ca-management/dialog-ca.rb:147 msgid "&Description" msgstr "설명(&D)" -#. Menu Item - CA - Tab -#: src/include/ca-management/dialog-ca.rb:149 +#. Menu Item - CA - Tab +#: src/include/ca-management/dialog-ca.rb:149 msgid "C&ertificates" msgstr "인증서(&E)" -#. Menu Item - CA - Tab -#: src/include/ca-management/dialog-ca.rb:151 +#. Menu Item - CA - Tab +#: src/include/ca-management/dialog-ca.rb:151 msgid "CR&L" msgstr "CRL(&L)" -#. Menu Item - CA - Tab -#: src/include/ca-management/dialog-ca.rb:153 +#. Menu Item - CA - Tab +#: src/include/ca-management/dialog-ca.rb:153 msgid "&Requests" msgstr "요청(&R)" -#. help text 1/7 -#: src/include/ca-management/new_cert.rb:89 +#. help text 1/7 +#: src/include/ca-management/new_cert.rb:89 msgid "<p>To generate a new CA, some entries are needed.</p>" msgstr "<p>새 CA를 생성하려면 몇 가지 항목이 필요합니다.</p>" -#: src/include/ca-management/new_cert.rb:91 +#: src/include/ca-management/new_cert.rb:91 msgid "<p>To generate a new certificate, some entries are needed.</p>" msgstr "<p>새 인증서를 생성하려면 몇 가지 항목이 필요합니다.</p>" -#: src/include/ca-management/new_cert.rb:96 +#: src/include/ca-management/new_cert.rb:96 msgid "<p>To generate a new request, some entries are needed.</p>" msgstr "<p>새 요청을 생성하려면 몇 가지 항목이 필요합니다.</p>" -#. help text 2/7 -#: src/include/ca-management/new_cert.rb:106 +#. help text 2/7 +#: src/include/ca-management/new_cert.rb:106 msgid "<p>It depends on the policy defined in the configuration file.</p>" msgstr "<p>구성 파일에 정의된 정책에 따라 다릅니다.</p>" -#. help text 4/7 -#: src/include/ca-management/new_cert.rb:111 +#. help text 4/7 +#: src/include/ca-management/new_cert.rb:111 msgid "<p>Only US ASCII characters are allowed.</p>" msgstr "<p>US ASCII 문자만 허용됩니다.</p>" -#. help text 5/7 -#: src/include/ca-management/new_cert.rb:117 -msgid "" -"<p><b>CA Name</b> is the name of a CA certificate. Use only the characters, " -"\"a-z\", \"A-Z\", \"-\", and \"_\".</p>" -msgstr "" -"<p><b>CA 이름</b>은 CA 인증서의 이름입니다. \"a-z\", \"A-Z\", \"-\", \"_\"만 " -"사용할 수 있습니다.</p>" +#. help text 5/7 +#: src/include/ca-management/new_cert.rb:117 +msgid "<p><b>CA Name</b> is the name of a CA certificate. Use only the characters, \"a-z\", \"A-Z\", \"-\", and \"_\".</p>" +msgstr "<p><b>CA 이름</b>은 CA 인증서의 이름입니다. \"a-z\", \"A-Z\", \"-\", \"_\"만 사용할 수 있습니다.</p>" -#: src/include/ca-management/new_cert.rb:123 +#: src/include/ca-management/new_cert.rb:123 msgid "<p><b>Common Name</b> is the name of the CA.</p>" msgstr "<p><b>일반 이름</b>은 CA의 이름입니다." -#: src/include/ca-management/new_cert.rb:129 -msgid "" -"<p><b>Common Name</b> is the name of the user for whom to create the " -"certificate.</p>" +#: src/include/ca-management/new_cert.rb:129 +msgid "<p><b>Common Name</b> is the name of the user for whom to create the certificate.</p>" msgstr "<p><b>일반 이름</b>은 인증서 작성 대상이 되는 사용자의 이름입니다.</p>" -#: src/include/ca-management/new_cert.rb:136 -msgid "" -"<p><b>Common Name</b> is the fully qualified domain name of the server.</p>" +#: src/include/ca-management/new_cert.rb:136 +msgid "<p><b>Common Name</b> is the fully qualified domain name of the server.</p>" msgstr "<p><b>일반 이름</b>은 서버의 정규화된 도메인 이름입니다." -#. help text 6/7 -#: src/include/ca-management/new_cert.rb:145 -msgid "" -"<p><b>E-Mail Addresses</b> are valid e-mail addresses of the user or server " -"administrator.</p>" -msgstr "" -"<p><b>전자 메일 주소</b>는 사용자 또는 서버 관리자의 유효한 전자 메일 주소입" -"니다.</p>" +#. help text 6/7 +#: src/include/ca-management/new_cert.rb:145 +msgid "<p><b>E-Mail Addresses</b> are valid e-mail addresses of the user or server administrator.</p>" +msgstr "<p><b>전자 메일 주소</b>는 사용자 또는 서버 관리자의 유효한 전자 메일 주소입니다.</p>" -#. help text 7/7 -#: src/include/ca-management/new_cert.rb:152 -msgid "" -"<p><b>Organization</b>, <b>Organizational Unit</b>, <b>Locality</b>, and " -"<b>State</b> are often optional.</p>" -msgstr "" -"<p><b>조직</b>, <b>조직 단위</b>, <b>구/군/시</b> 및 <b>시/도</b>는 종종 선" -"택 사항입니다.</p>" +#. help text 7/7 +#: src/include/ca-management/new_cert.rb:152 +msgid "<p><b>Organization</b>, <b>Organizational Unit</b>, <b>Locality</b>, and <b>State</b> are often optional.</p>" +msgstr "<p><b>조직</b>, <b>조직 단위</b>, <b>구/군/시</b> 및 <b>시/도</b>는 종종 선택 사항입니다.</p>" -#. To translators: pushbutton label -#: src/include/ca-management/new_cert.rb:173 +#. To translators: pushbutton label +#: src/include/ca-management/new_cert.rb:173 msgid "D&efault" msgstr "기본값(&E)" -#. To translators: table headers -#: src/include/ca-management/new_cert.rb:194 +#. To translators: table headers +#: src/include/ca-management/new_cert.rb:194 msgid "E-Mail Addresses" msgstr "전자 메일 주소" -#: src/include/ca-management/new_cert.rb:195 +#: src/include/ca-management/new_cert.rb:195 msgid "default" msgstr "기본" -#. To translators: dialog label -#. To translators: dialog label -#. To translators: dialog label -#: src/include/ca-management/new_cert.rb:272 -#: src/include/ca-management/new_cert.rb:616 -#: src/include/ca-management/new_cert.rb:1285 +#. To translators: dialog label +#. To translators: dialog label +#. To translators: dialog label +#: src/include/ca-management/new_cert.rb:272 +#: src/include/ca-management/new_cert.rb:616 +#: src/include/ca-management/new_cert.rb:1285 msgid "Create New " msgstr "새로 작성(&E)..." -#: src/include/ca-management/new_cert.rb:272 +#: src/include/ca-management/new_cert.rb:272 msgid " (step 1/3)" msgstr " 단계" -#. help text 1/4 -#: src/include/ca-management/new_cert.rb:469 -msgid "" -"<p>The private key of the CA needs a <B>Password</B> with a minimum length " -"of five characters. For verification reasons, reenter it in the next field." -msgstr "" -"<p>CA의 개인 키에는 최소 다섯 글자 길이의 <B>비밀번호</B>가 필요합니다. 확인" -"을 위해 비밀번호를 다음 필드에 다시 입력해야 합니다.</p>" +#. help text 1/4 +#: src/include/ca-management/new_cert.rb:469 +msgid "<p>The private key of the CA needs a <B>Password</B> with a minimum length of five characters. For verification reasons, reenter it in the next field.</p>" +msgstr "<p>CA의 개인 키에는 최소 다섯 글자 길이의 <B>비밀번호</B>가 필요합니다. 확인을 위해 비밀번호를 다음 필드에 다시 입력해야 합니다.</p>" -#. help text 2/4 -#: src/include/ca-management/new_cert.rb:476 -msgid "" -"<p>Each CA has its own <b>Key Length</b>. Some applications that use " -"certificates need special key lengths.</p>" -msgstr "" -"<p>각 CA는 고유한 <b>키 길이</b>를 가지고 있습니다. 인증서를 사용하는 일부 응" -"용 프로그램에서는 특수한 키 길이를 요구합니다.</p>" +#. help text 2/4 +#: src/include/ca-management/new_cert.rb:476 +msgid "<p>Each CA has its own <b>Key Length</b>. Some applications that use certificates need special key lengths.</p>" +msgstr "<p>각 CA는 고유한 <b>키 길이</b>를 가지고 있습니다. 인증서를 사용하는 일부 응용 프로그램에서는 특수한 키 길이를 요구합니다.</p>" -#. help text 3/4 -#: src/include/ca-management/new_cert.rb:484 -msgid "" -"<p>The CA is valid for only specific period (<b>Valid Period</b>). Enter the " -"time frame in days.</p>" -msgstr "" -"<p>CA는 지정된 기간(<b>유효 기간</b>) 동안에만 유효합니다. 시간을 일 단위로 " -"입력하십시오.</p>" +#. help text 3/4 +#: src/include/ca-management/new_cert.rb:484 +msgid "<p>The CA is valid for only specific period (<b>Valid Period</b>). Enter the time frame in days.</p>" +msgstr "<p>CA는 지정된 기간(<b>유효 기간</b>) 동안에만 유효합니다. 시간을 일 단위로 입력하십시오.</p>" -#. help text 4/4 -#. help text 4/4 -#. help text 3/3 -#: src/include/ca-management/new_cert.rb:492 -#: src/include/ca-management/new_cert.rb:521 -#: src/include/ca-management/new_cert.rb:543 -msgid "" -"<p><b>Advanced Options</b> are very special options. If you change these " -"options, SUSE cannot guarantee that the generated certificate will work " -"correctly.</p>" -msgstr "" -"<p><b>고급 옵션</b>은 매우 특별한 옵션입니다. 이 옵션을 변경하면 생성된 인증" -"서가 SUSE에서 올바로 작동하지 않을 수 있습니다.</p>" +#. help text 4/4 +#. help text 4/4 +#. help text 3/3 +#: src/include/ca-management/new_cert.rb:492 +#: src/include/ca-management/new_cert.rb:521 +#: src/include/ca-management/new_cert.rb:543 +msgid "<p><b>Advanced Options</b> are very special options. If you change these options, SUSE cannot guarantee that the generated certificate will work correctly.</p>" +msgstr "<p><b>고급 옵션</b>은 매우 특별한 옵션입니다. 이 옵션을 변경하면 생성된 인증서가 SUSE에서 올바로 작동하지 않을 수 있습니다.</p>" -#. help text 1/4 -#: src/include/ca-management/new_cert.rb:498 -msgid "" -"<p>The private key of the certificate needs a <B>Password</B> with a minimum " -"length of five characters. For verification reasons, reenter it in the next " -"field.</p>" -msgstr "" -"<p>인증서의 개인 키에는 최소 다섯 글자 길이의 <B>비밀번호</B>가 필요합니다. " -"확인을 위해 비밀번호를 다음 필드에 다시 입력해야 합니다.</p>" +#. help text 1/4 +#: src/include/ca-management/new_cert.rb:498 +msgid "<p>The private key of the certificate needs a <B>Password</B> with a minimum length of five characters. For verification reasons, reenter it in the next field.</p>" +msgstr "<p>인증서의 개인 키에는 최소 다섯 글자 길이의 <B>비밀번호</B>가 필요합니다. 확인을 위해 비밀번호를 다음 필드에 다시 입력해야 합니다.</p>" -#. help text 2/4 -#: src/include/ca-management/new_cert.rb:505 -msgid "" -"<p>Each certificate has its own <b>Key Length</b>. Some applications that " -"use certificates need special key lengths.</p>" -msgstr "" -"<p>각 인증서는 고유한 <b>키 길이</b>를 가지고 있습니다. 인증서를 사용하는 일" -"부 응용 프로그램에서는 특수한 키 길이를 요구합니다.</p>" +#. help text 2/4 +#: src/include/ca-management/new_cert.rb:505 +msgid "<p>Each certificate has its own <b>Key Length</b>. Some applications that use certificates need special key lengths.</p>" +msgstr "<p>각 인증서는 고유한 <b>키 길이</b>를 가지고 있습니다. 인증서를 사용하는 일부 응용 프로그램에서는 특수한 키 길이를 요구합니다.</p>" -#. help text 3/4 -#: src/include/ca-management/new_cert.rb:513 -msgid "" -"<p>The certificate is valid for only specific period (<b>Valid Period</b>). " -"Enter the time frame in days.</p>" -msgstr "" -"<p>인증서는 지정된 기간(<b>유효 기간</b>) 동안에만 유효합니다. 시간을 일 단위" -"로 입력하십시오.</p>" +#. help text 3/4 +#: src/include/ca-management/new_cert.rb:513 +msgid "<p>The certificate is valid for only specific period (<b>Valid Period</b>). Enter the time frame in days.</p>" +msgstr "<p>인증서는 지정된 기간(<b>유효 기간</b>) 동안에만 유효합니다. 시간을 일 단위로 입력하십시오.</p>" -#. help text 1/3 -#: src/include/ca-management/new_cert.rb:528 -msgid "" -"<p>The private key of the request needs a <B>Password</B> with a minimum " -"length of five characters. For verification reasons, reenter it in the next " -"field.</p>" -msgstr "" -"<p>요청의 개인 키에는 최소 다섯 글자 길이의 <B>비밀번호</B>가 필요합니다. 확" -"인을 위해 비밀번호를 다음 필드에 다시 입력해야 합니다.</p>" +#. help text 1/3 +#: src/include/ca-management/new_cert.rb:528 +msgid "<p>The private key of the request needs a <B>Password</B> with a minimum length of five characters. For verification reasons, reenter it in the next field.</p>" +msgstr "<p>요청의 개인 키에는 최소 다섯 글자 길이의 <B>비밀번호</B>가 필요합니다. 확인을 위해 비밀번호를 다음 필드에 다시 입력해야 합니다.</p>" -#. help text 2/3 -#: src/include/ca-management/new_cert.rb:535 -msgid "" -"<p>Each request has its own <b>Key Length</b>. Some applications that use " -"certificates need special key lengths.</p>" -msgstr "" -"<p>각 요청은 고유한 <b>키 길이</b>를 가지고 있습니다. 인증서를 사용하는 일부 " -"응용 프로그램에서는 특수한 키 길이를 요구합니다.</p>" +#. help text 2/3 +#: src/include/ca-management/new_cert.rb:535 +msgid "<p>Each request has its own <b>Key Length</b>. Some applications that use certificates need special key lengths.</p>" +msgstr "<p>각 요청은 고유한 <b>키 길이</b>를 가지고 있습니다. 인증서를 사용하는 일부 응용 프로그램에서는 특수한 키 길이를 요구합니다.</p>" -#: src/include/ca-management/new_cert.rb:561 +#: src/include/ca-management/new_cert.rb:561 msgid "&Use CA Password as Certificate Password" msgstr "CA 비밀번호를 인증서 비밀번호로 사용(&U)" -#: src/include/ca-management/new_cert.rb:582 +#: src/include/ca-management/new_cert.rb:582 msgid "V&erify Password:" msgstr "비밀번호 확인" -#: src/include/ca-management/new_cert.rb:590 +#: src/include/ca-management/new_cert.rb:590 msgid "&Key Length (bit):" msgstr "키 길이(비트)(&K):" -#. tree widget label -#: src/include/ca-management/new_cert.rb:611 -#: src/include/ca-management/new_cert_advanced.rb:108 +#. tree widget label +#: src/include/ca-management/new_cert.rb:611 +#: src/include/ca-management/new_cert_advanced.rb:108 msgid "&Advanced Options" msgstr "고급 옵션" -#: src/include/ca-management/new_cert.rb:616 +#: src/include/ca-management/new_cert.rb:616 msgid " (step 2/3)" msgstr " 단계" -#: src/include/ca-management/new_cert.rb:661 +#: src/include/ca-management/new_cert.rb:661 msgid "Passwords are different." msgstr "비밀번호가 다릅니다." -#: src/include/ca-management/new_cert.rb:667 +#: src/include/ca-management/new_cert.rb:667 msgid "Password required." msgstr "비밀번호가 필요합니다." -#. help text 1/2 -#: src/include/ca-management/new_cert.rb:700 -msgid "" -"<p>This frame gives an overview of all settings for the CA that will be " -"created.</p>" +#. help text 1/2 +#: src/include/ca-management/new_cert.rb:700 +msgid "<p>This frame gives an overview of all settings for the CA that will be created.</p>" msgstr "<p>이 프레임에서는 작성할 CA의 모든 설정에 대한 개요를 보여줍니다.</p>" -#. help text 2/2 -#: src/include/ca-management/new_cert.rb:706 +#. help text 2/2 +#: src/include/ca-management/new_cert.rb:706 msgid "<p>Click <b>Create</b> to generate the CA.</p>" msgstr "<p>CA를 생성하려면 <b>작성</b>을 클릭하십시오.</p>" -#. help text 1/2 -#: src/include/ca-management/new_cert.rb:710 -msgid "" -"<p>This frame gives an overview of all settings for the certificate that " -"will be created.</p>" -msgstr "" -"<p>이 프레임에서는 작성할 인증서의 모든 설정에 대한 개요를 보여줍니다.</p>" +#. help text 1/2 +#: src/include/ca-management/new_cert.rb:710 +msgid "<p>This frame gives an overview of all settings for the certificate that will be created.</p>" +msgstr "<p>이 프레임에서는 작성할 인증서의 모든 설정에 대한 개요를 보여줍니다.</p>" -#. help text 2/2 -#: src/include/ca-management/new_cert.rb:716 +#. help text 2/2 +#: src/include/ca-management/new_cert.rb:716 msgid "<p>Click <b>Create</b> to generate the certificate.</p>" msgstr "<p>인증서를 생성하려면 <b>작성</b>을 클릭하십시오.</p>" -#. help text 1/2 -#: src/include/ca-management/new_cert.rb:721 -msgid "" -"<p>This frame gives an overview of all settings for the request that will be " -"created.</p>" -msgstr "" -"<p>이 프레임에서는 작성할 요청의 모든 설정에 대한 개요를 보여줍니다.</p>" +#. help text 1/2 +#: src/include/ca-management/new_cert.rb:721 +msgid "<p>This frame gives an overview of all settings for the request that will be created.</p>" +msgstr "<p>이 프레임에서는 작성할 요청의 모든 설정에 대한 개요를 보여줍니다.</p>" -#. help text 2/2 -#: src/include/ca-management/new_cert.rb:727 +#. help text 2/2 +#: src/include/ca-management/new_cert.rb:727 msgid "<p>Click <b>Create</b> to generate the request.</p>" msgstr "<p>요청을 생성하려면 <b>작성</b>을 클릭하십시오.</p>" -#: src/include/ca-management/new_cert.rb:736 +#: src/include/ca-management/new_cert.rb:736 msgid "CA Name: " msgstr "CA 이름:" -#: src/include/ca-management/new_cert.rb:743 +#: src/include/ca-management/new_cert.rb:743 msgid "Common Name: " msgstr "일반 이름:" -#: src/include/ca-management/new_cert.rb:752 +#: src/include/ca-management/new_cert.rb:752 msgid "Organization: " msgstr "조직:" -#: src/include/ca-management/new_cert.rb:761 +#: src/include/ca-management/new_cert.rb:761 msgid "Organizational Unit: " msgstr "조직 단위" -#: src/include/ca-management/new_cert.rb:769 +#: src/include/ca-management/new_cert.rb:769 msgid "E-Mail Addresses: " msgstr "전자 메일 주소:" -#: src/include/ca-management/new_cert.rb:793 +#: src/include/ca-management/new_cert.rb:793 msgid "Locality: " msgstr "구/군/시:" -#: src/include/ca-management/new_cert.rb:801 +#: src/include/ca-management/new_cert.rb:801 msgid "State: " msgstr "상태" -#: src/include/ca-management/new_cert.rb:807 +#: src/include/ca-management/new_cert.rb:807 msgid "Country: " msgstr "국가(&C)" -#: src/include/ca-management/new_cert.rb:812 +#: src/include/ca-management/new_cert.rb:812 msgid "Key Length: " msgstr "키 길이(&K)" -#: src/include/ca-management/new_cert.rb:817 +#: src/include/ca-management/new_cert.rb:817 msgid "Valid Period: " msgstr "유효 기간:" -#: src/include/ca-management/new_cert.rb:820 +#: src/include/ca-management/new_cert.rb:820 msgid " days\n" msgstr " 일\n" -#: src/include/ca-management/new_cert.rb:831 -#: src/include/ca-management/signRequest.rb:814 +#: src/include/ca-management/new_cert.rb:831 +#: src/include/ca-management/signRequest.rb:814 msgid "Path Length " msgstr "경로 길이" -#: src/include/ca-management/new_cert.rb:1285 +#: src/include/ca-management/new_cert.rb:1285 msgid " (step 3/3)" msgstr " 단계" -#. label widget -#. header label -#: src/include/ca-management/new_cert_advanced.rb:122 -#: src/include/ca-management/new_cert_advanced.rb:241 +#. label widget +#. header label +#: src/include/ca-management/new_cert_advanced.rb:122 +#: src/include/ca-management/new_cert_advanced.rb:241 msgid "Current Selection: " msgstr "현재의 선택: " -#. popup window header -#: src/include/ca-management/new_cert_advanced.rb:189 +#. popup window header +#: src/include/ca-management/new_cert_advanced.rb:189 msgid "Help" msgstr "도움" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2004 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#. -#. File: -#. new_cert_item.ycp -#. -#. Module: -#. CA Management -#. -#. Summary: -#. Items definition for advanced setting ( creating -#. new certificate ) -#. -#. Authors: -#. Stefan Schubert -#. -#. $Id$ -#. -#. Creating a new CA/Certificate -#: src/include/ca-management/new_cert_items.rb:55 -msgid "" -"<P>This frame shows further attributes and OpenSSL X509v3 extensions that " -"can be set. If you are not familiar with these extensions, refer to the " -"file /usr/share/doc/packages/openssl-doc/openssl.txt (package openssl-doc)." -msgstr "" -"<P>이 프레임은 설정할 수 있는 추가 특성과 OpenSSL X509v3 확장을 보여 줍니다. " -"이러한 확장에 익숙하지 않은 경우 /usr/share/doc/packages/openssl-doc/openssl." -"txt(openssl-doc 패키지) 파일을 참조하십시오.</P>" +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2004 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#. +#. File: +#. new_cert_item.ycp +#. +#. Module: +#. CA Management +#. +#. Summary: +#. Items definition for advanced setting ( creating +#. new certificate ) +#. +#. Authors: +#. Stefan Schubert +#. +#. $Id$ +#. +#. Creating a new CA/Certificate +#: src/include/ca-management/new_cert_items.rb:55 +msgid "<P>This frame shows further attributes and OpenSSL X509v3 extensions that can be set. If you are not familiar with these extensions, refer to the file /usr/share/doc/packages/openssl-doc/openssl.txt (package openssl-doc).</P>" +msgstr "<P>이 프레임은 설정할 수 있는 추가 특성과 OpenSSL X509v3 확장을 보여 줍니다. 이러한 확장에 익숙하지 않은 경우 /usr/share/doc/packages/openssl-doc/openssl.txt(openssl-doc 패키지) 파일을 참조하십시오.</P>" -#: src/include/ca-management/new_cert_items.rb:61 +#: src/include/ca-management/new_cert_items.rb:61 msgid "<P>Wrong entries can make the certificate unusable.</P>" msgstr "<P>잘못된 항목이 있으면 인증서를 사용하지 못할 수도 있습니다.</P>" -#. items for CA and Certificates -#. items for Requests -#: src/include/ca-management/new_cert_items.rb:68 -#: src/include/ca-management/new_cert_items.rb:121 -#: src/include/ca-management/new_cert_items.rb:155 +#. items for CA and Certificates +#. items for Requests +#: src/include/ca-management/new_cert_items.rb:68 +#: src/include/ca-management/new_cert_items.rb:121 +#: src/include/ca-management/new_cert_items.rb:155 msgid "Advanced Settings" msgstr "고급 설정..." -#: src/include/ca-management/new_cert_items.rb:92 -#: src/include/ca-management/new_cert_items.rb:143 -#: src/include/ca-management/new_cert_items.rb:598 +#: src/include/ca-management/new_cert_items.rb:92 +#: src/include/ca-management/new_cert_items.rb:143 +#: src/include/ca-management/new_cert_items.rb:598 msgid "Expert Settings" msgstr "고급 설정" -#. Creating default CA/Certificate -#. @return [Boolean] ( success ) -#: src/include/ca-management/new_cert_read_write.rb:1891 +#. Creating default CA/Certificate +#. @return [Boolean] ( success ) +#: src/include/ca-management/new_cert_read_write.rb:1891 msgid "Creating certificate..." msgstr "인증서 작성 중..." -#. Creating server certificate -#. Exporting to common server certificate -#: src/include/ca-management/new_cert_read_write.rb:1933 -#: src/include/ca-management/new_cert_read_write.rb:2014 +#. Creating server certificate +#. Exporting to common server certificate +#: src/include/ca-management/new_cert_read_write.rb:1933 +#: src/include/ca-management/new_cert_read_write.rb:2014 msgid "" "The default certificate can also be created in\n" "the CA Management module.\n" @@ -2112,121 +1932,106 @@ "기본 인증서는 CA 관리 모듈에서도 작성할\n" "수 있습니다.\n" -#. To translators: ContinueCancel Popup headline -#: src/include/ca-management/popup.rb:52 +#. To translators: ContinueCancel Popup headline +#: src/include/ca-management/popup.rb:52 msgid "Finish" msgstr "완료" -#. To translators: ContinueCancel Popup -#: src/include/ca-management/popup.rb:54 +#. To translators: ContinueCancel Popup +#: src/include/ca-management/popup.rb:54 msgid "Really save configuration ?" msgstr "설정을 저장하시겠습니까?" -#. To translators: YesNo Popup headline -#: src/include/ca-management/popup.rb:66 +#. To translators: YesNo Popup headline +#: src/include/ca-management/popup.rb:66 msgid "Exit" msgstr "종료" -#. To translators: YesNo Popup -#: src/include/ca-management/popup.rb:68 +#. To translators: YesNo Popup +#: src/include/ca-management/popup.rb:68 msgid "Really exit configuration without saving ?" msgstr "정말로 저장하지 않고 끝내시겠습니까?" -#. Show description while normal installation only.(bnc#962328) -#: src/include/ca-management/popup.rb:91 +#. Show description while normal installation only.(bnc#962328) +#: src/include/ca-management/popup.rb:91 msgid "Details" msgstr "세부 사항(&D)" -#. help text 1/6 -#: src/include/ca-management/request.rb:47 -msgid "" -"<p>First, see a list view with all available requests of this CA. The " -"columns are the DN of the request including the e-mail address.</p>" -msgstr "" -"<p>먼저 이 CA에서 사용할 수 있는 모든 요청이 포함된 목록을 볼 수 있습니다. " -"각 열은 전자 메일 주소가 포함된 요청의 DN입니다.</p>" +#. help text 1/6 +#: src/include/ca-management/request.rb:47 +msgid "<p>First, see a list view with all available requests of this CA. The columns are the DN of the request including the e-mail address.</p>" +msgstr "<p>먼저 이 CA에서 사용할 수 있는 모든 요청이 포함된 목록을 볼 수 있습니다. 각 열은 전자 메일 주소가 포함된 요청의 DN입니다.</p>" -#. help text 2/6 -#: src/include/ca-management/request.rb:53 +#. help text 2/6 +#: src/include/ca-management/request.rb:53 msgid "<p>Select one of the requests and execute some actions.</p>" msgstr "<p>요청 중 하나를 선택하고 몇 가지 동작을 수행합니다.</p>" -#. help text 3/6 -#: src/include/ca-management/request.rb:58 -msgid "" -"<p><b>View</b> opens a window with a text representation of the complete " -"request.</p>" +#. help text 3/6 +#: src/include/ca-management/request.rb:58 +msgid "<p><b>View</b> opens a window with a text representation of the complete request.</p>" msgstr "<p><b>보기</b>는 완전한 요청을 텍스트로 표현하는 창을 엽니다.</p>" -#. help text 4/6 -#: src/include/ca-management/request.rb:65 -msgid "" -"<p>You can also <b>Sign</b>, <b>Delete</b>, or <b>Export</b> a request.</p>" -msgstr "" -"<p>또한 요청의 <b>서명</b>, <b>삭제</b> 또는 <b>엑스포트</b>도 가능합니다." +#. help text 4/6 +#: src/include/ca-management/request.rb:65 +msgid "<p>You can also <b>Sign</b>, <b>Delete</b>, or <b>Export</b> a request.</p>" +msgstr "<p>또한 요청의 <b>서명</b>, <b>삭제</b> 또는 <b>엑스포트</b>도 가능합니다.</p>" -#. help text 5/6 -#: src/include/ca-management/request.rb:72 -msgid "" -"<p>With <b>Import</b>, read a new request. With <b>Add</b>, generate a new " -"request.</p>" -msgstr "" -"<p><b>임포트</b>를 사용하면 새 요청을 읽을 수 있습니다. <b>추가</b>를 사용하" -"면 새 요청을 생성할 수 있습니다.</p>" +#. help text 5/6 +#: src/include/ca-management/request.rb:72 +msgid "<p>With <b>Import</b>, read a new request. With <b>Add</b>, generate a new request.</p>" +msgstr "<p><b>임포트</b>를 사용하면 새 요청을 읽을 수 있습니다. <b>추가</b>를 사용하면 새 요청을 생성할 수 있습니다.</p>" -#. help text 6/6 -#: src/include/ca-management/request.rb:79 -msgid "" -"<p>In the area below, see the most important values of the selected request." -"</p>" +#. help text 6/6 +#: src/include/ca-management/request.rb:79 +msgid "<p>In the area below, see the most important values of the selected request.</p>" msgstr "<p>아래 영역에서는 선택한 요청의 가장 중요한 값을 볼 수 있습니다.</p>" -#: src/include/ca-management/request.rb:326 +#: src/include/ca-management/request.rb:326 msgid "Generate Time" msgstr "생성 시간" -#: src/include/ca-management/request.rb:335 +#: src/include/ca-management/request.rb:335 msgid "&Import" msgstr "불러오기(&I)" -#: src/include/ca-management/request.rb:340 +#: src/include/ca-management/request.rb:340 msgid "Add Sub-CA Request" msgstr "하위 CA 요청 추가" -#: src/include/ca-management/request.rb:341 +#: src/include/ca-management/request.rb:341 msgid "Add Server Request" msgstr "서버 요청 추가" -#: src/include/ca-management/request.rb:342 +#: src/include/ca-management/request.rb:342 msgid "Add Client Request" msgstr "클라이언트 요청 추가" -#: src/include/ca-management/request.rb:348 +#: src/include/ca-management/request.rb:348 msgid "&Request" msgstr "요청(&R)" -#: src/include/ca-management/request.rb:354 +#: src/include/ca-management/request.rb:354 msgid "Sign" msgstr "서명" -#: src/include/ca-management/request.rb:356 +#: src/include/ca-management/request.rb:356 msgid "As Client Certificate" msgstr "클라이언트 인증서로서" -#: src/include/ca-management/request.rb:357 +#: src/include/ca-management/request.rb:357 msgid "As Server Certificate" msgstr "서버 인증서로서" -#: src/include/ca-management/request.rb:358 +#: src/include/ca-management/request.rb:358 msgid "As CA Certificate" msgstr "CA 인증서로서" -#: src/include/ca-management/request.rb:430 +#: src/include/ca-management/request.rb:430 msgid "Delete current request?" msgstr "현재 요청을 삭제하시겠습니까?" -#: src/include/ca-management/signRequest.rb:58 +#: src/include/ca-management/signRequest.rb:58 msgid "" "\n" "Request not found.\n" @@ -2234,8 +2039,8 @@ "\n" "요청을 찾을 수 없습니다.\n" -#. Preformated Text: take care that all translations have the same length -#: src/include/ca-management/signRequest.rb:74 +#. Preformated Text: take care that all translations have the same length +#: src/include/ca-management/signRequest.rb:74 msgid "" "\n" "generation Time: " @@ -2243,178 +2048,168 @@ "\n" "생성 시간: " -#. Reset an accpetation of a RequestExtention -#. @param request extention -#. @return [void] -#. The user has decide that given request extention -#. will be used. --> setting for signation -#. @param request extention -#. @return [void] -#. Filling up reqeust extentions -#: src/include/ca-management/signRequest.rb:257 -#: src/include/ca-management/signRequest.rb:581 -#: src/include/ca-management/signRequest.rb:686 +#. Reset an accpetation of a RequestExtention +#. @param request extention +#. @return [void] +#. The user has decide that given request extention +#. will be used. --> setting for signation +#. @param request extention +#. @return [void] +#. Filling up reqeust extentions +#: src/include/ca-management/signRequest.rb:257 +#: src/include/ca-management/signRequest.rb:581 +#: src/include/ca-management/signRequest.rb:686 msgid "Extension \"%1\" not found." msgstr "%1 확장을 찾을 수 없습니다." -#. IS CA ? -#: src/include/ca-management/signRequest.rb:644 +#. IS CA ? +#: src/include/ca-management/signRequest.rb:644 msgid "This is a CA request. Really sign it as a %1?" msgstr "이것은 CA 요청입니다. %1(으)로서 서명하시겠습니까?" -#: src/include/ca-management/signRequest.rb:651 +#: src/include/ca-management/signRequest.rb:651 msgid "This is not a CA request. Really sign it as a CA request?" msgstr "이것은 CA 요청이 아닙니다. CA 요청으로서 서명하시겠습니까?" -#. help text 1/3 -#: src/include/ca-management/signRequest.rb:703 +#. help text 1/3 +#: src/include/ca-management/signRequest.rb:703 msgid "<p>This frame shows the signing request.</p>" msgstr "<p>이 프레임에서는 요청 서명을 보여줍니다.</p>" -#. help text 2/3 -#: src/include/ca-management/signRequest.rb:708 -msgid "" -"<p>The request has special request extensions, which you can accept.</p>" -msgstr "" -"<p>요청에는 특수 요청 확장이 있는데, 사용자는 이를 수용할 수 있습니다.</p>" +#. help text 2/3 +#: src/include/ca-management/signRequest.rb:708 +msgid "<p>The request has special request extensions, which you can accept.</p>" +msgstr "<p>요청에는 특수 요청 확장이 있는데, 사용자는 이를 수용할 수 있습니다.</p>" -#. help text 3/3 -#: src/include/ca-management/signRequest.rb:715 -msgid "" -"<p>If you reject these extensions, the default values are taken instead.</p>" +#. help text 3/3 +#: src/include/ca-management/signRequest.rb:715 +msgid "<p>If you reject these extensions, the default values are taken instead.</p>" msgstr "<p>이러한 확장을 거부할 경우 기본값이 대신 사용됩니다.</p>" -#: src/include/ca-management/signRequest.rb:731 +#: src/include/ca-management/signRequest.rb:731 msgid "Requested Extensions" msgstr "요청된 확장" -#: src/include/ca-management/signRequest.rb:737 +#: src/include/ca-management/signRequest.rb:737 msgid "Sign Request as a %1 (Step 1/2)" msgstr "요청을 %1(으)로서 서명(1/2 단계)" -#. help text 1/2 -#: src/include/ca-management/signRequest.rb:777 -msgid "" -"<p>This frame gives an overview of all settings for the request that will be " -"signed.</p>" -msgstr "" -"<p>이 프레임에서는 서명할 요청의 모든 설정에 대한 개요를 보여줍니다.</p>" +#. help text 1/2 +#: src/include/ca-management/signRequest.rb:777 +msgid "<p>This frame gives an overview of all settings for the request that will be signed.</p>" +msgstr "<p>이 프레임에서는 서명할 요청의 모든 설정에 대한 개요를 보여줍니다.</p>" -#. help text 2/2 -#: src/include/ca-management/signRequest.rb:783 +#. help text 2/2 +#: src/include/ca-management/signRequest.rb:783 msgid "<p>Click <b>Sign Request</b> to go on.</p>" msgstr "<p>계속하려면 <b>요청 서명</b>을 클릭하십시오.</p>" -#: src/include/ca-management/signRequest.rb:801 +#: src/include/ca-management/signRequest.rb:801 msgid " days" msgstr " 일" -#: src/include/ca-management/signRequest.rb:807 +#: src/include/ca-management/signRequest.rb:807 msgid " (critical)</p>" msgstr " (중요)</p>" -#: src/include/ca-management/signRequest.rb:1233 +#: src/include/ca-management/signRequest.rb:1233 msgid "&Edit Request" msgstr "요청 편집(&E)" -#. To translators: dialog label -#: src/include/ca-management/signRequest.rb:1238 +#. To translators: dialog label +#: src/include/ca-management/signRequest.rb:1238 msgid "Sign Request as a %1 (Step 2/2)" msgstr "요청을 %1(으)로서 서명(2/2 단계)" -#: src/include/ca-management/signRequest.rb:1244 +#: src/include/ca-management/signRequest.rb:1244 msgid "Sign Request" msgstr "요청 서명" -#. signing request -#: src/include/ca-management/signRequest.rb:1257 +#. signing request +#: src/include/ca-management/signRequest.rb:1257 msgid "The request has been signed." msgstr "요청이 서명되었습니다." -#. Deleting current CA -#: src/include/ca-management/startup.rb:105 +#. Deleting current CA +#: src/include/ca-management/startup.rb:105 msgid "Really delete CA %1?" msgstr "CA %1(을)를 삭제하시겠습니까?" -#: src/include/ca-management/startup.rb:118 +#: src/include/ca-management/startup.rb:118 msgid "Force Delete" msgstr "강제 삭제" -#: src/include/ca-management/startup.rb:119 +#: src/include/ca-management/startup.rb:119 msgid "This CA is still in use. Delete it?" msgstr "이 CA는 아직 사용 중입니다. 삭제하시겠습니까?" -#. help text 1/3 -#: src/include/ca-management/startup.rb:145 +#. help text 1/3 +#: src/include/ca-management/startup.rb:145 msgid "<p>Select one CA and press <b>Enter CA</b>.</p>" msgstr "<p>CA 하나를 선택하고 <b>CA 입력</b>을 누르십시오.</p>" -#. help text 2/3 -#: src/include/ca-management/startup.rb:149 -msgid "" -"<p><b>Create Root CA</b> generates a new root certificate authority.</p>" -msgstr "" -"<p><b>루트 CA 작성</b>을 선택하면 새 루트 인증 기관(CA)이 생성됩니다.</p>" +#. help text 2/3 +#: src/include/ca-management/startup.rb:149 +msgid "<p><b>Create Root CA</b> generates a new root certificate authority.</p>" +msgstr "<p><b>루트 CA 작성</b>을 선택하면 새 루트 인증 기관(CA)이 생성됩니다.</p>" -#. help text 3/3 -#: src/include/ca-management/startup.rb:156 -msgid "" -"<p>For more information about CA Management, please read the manual.</p>" +#. help text 3/3 +#: src/include/ca-management/startup.rb:156 +msgid "<p>For more information about CA Management, please read the manual.</p>" msgstr "<p>CA 관리에 대한 자세한 내용은 매뉴얼을 참조하십시오.</p>" -#. To translators: pushbutton label -#: src/include/ca-management/startup.rb:167 +#. To translators: pushbutton label +#: src/include/ca-management/startup.rb:167 msgid "&Enter CA" msgstr "CA 입력(&E)" -#: src/include/ca-management/startup.rb:171 +#: src/include/ca-management/startup.rb:171 msgid "&Delete CA" msgstr "CA 삭제(&D)" -#. To translators: pushbutton label -#: src/include/ca-management/startup.rb:180 +#. To translators: pushbutton label +#: src/include/ca-management/startup.rb:180 msgid "&Create Root CA" msgstr "루트 CA 작성(&C)" -#. To translators: pushbutton label -#: src/include/ca-management/startup.rb:187 +#. To translators: pushbutton label +#: src/include/ca-management/startup.rb:187 msgid "&Import CA" msgstr "CA 임포트(&I)" -#. To translators: tree headers -#: src/include/ca-management/startup.rb:199 +#. To translators: tree headers +#: src/include/ca-management/startup.rb:199 msgid "CA Tree" msgstr "CA 트리" -#. To translators: dialog label -#: src/include/ca-management/startup.rb:208 +#. To translators: dialog label +#: src/include/ca-management/startup.rb:208 msgid "CA Selection" msgstr "CA 선택" -#. Change password Dialog -#: src/include/ca-management/util.rb:173 +#. Change password Dialog +#: src/include/ca-management/util.rb:173 msgid "Change Certificate Password" msgstr "인증서 비밀번호 변경" -#: src/include/ca-management/util.rb:174 +#: src/include/ca-management/util.rb:174 msgid "Change CA Password" msgstr "CA 비밀번호 변경" -#. popup window header -#: src/include/ca-management/util.rb:186 +#. popup window header +#: src/include/ca-management/util.rb:186 msgid "&Old Password:" msgstr "이전 비밀번호(&O):" -#: src/include/ca-management/util.rb:188 -#: src/include/ca-management/util.rb:380 +#: src/include/ca-management/util.rb:188 src/include/ca-management/util.rb:380 msgid "&New Password:" msgstr "새 비밀번호(&N):" -#: src/include/ca-management/util.rb:189 +#: src/include/ca-management/util.rb:189 msgid "&Verify Password:" msgstr "비밀번호 확인(&V):" -#: src/include/ca-management/util.rb:220 +#: src/include/ca-management/util.rb:220 msgid "" "The new password is too short to use it for the certificates.\n" "Enter a valid password for the certificates.\n" @@ -2422,45 +2217,44 @@ "새 비밀번호가 너무 짧아서 인증서에 사용할 수 없습니다. \n" "인증서에 유효한 비밀번호를 입력하십시오.\n" -#: src/include/ca-management/util.rb:245 +#: src/include/ca-management/util.rb:245 msgid "CA Password changed." msgstr "CA 비밀번호가 변경되었습니다." -#: src/include/ca-management/util.rb:247 +#: src/include/ca-management/util.rb:247 msgid "Certificate Password changed." msgstr "인증서 비밀번호가 변경되었습니다." -#. popup window header -#: src/include/ca-management/util.rb:275 +#. popup window header +#: src/include/ca-management/util.rb:275 msgid "Enter CA Password" msgstr "CA 비밀번호 입력" -#. Dialog for exporting CA/Certificate/CRL to LDAP -#. -#. @param "CA" "CRL" "CERT" "subjectAltName" -#. @return true ( success ) -#: src/include/ca-management/util.rb:349 +#. Dialog for exporting CA/Certificate/CRL to LDAP +#. +#. @param "CA" "CRL" "CERT" "subjectAltName" +#. @return true ( success ) +#: src/include/ca-management/util.rb:349 msgid "LDAP P&assword:" msgstr "LDAP 비밀번호(&A):" #: src/include/ca-management/util.rb:375 -#: src/include/ca-management/util.rb:1032 -#: src/include/ca-management/util.rb:1388 +#: src/include/ca-management/util.rb:1032 +#: src/include/ca-management/util.rb:1388 msgid "Certificate &Password:" msgstr "인증서 비밀번호(&P):" -#: src/include/ca-management/util.rb:381 -#: src/include/ca-management/util.rb:697 -#: src/include/ca-management/util.rb:1039 +#: src/include/ca-management/util.rb:381 src/include/ca-management/util.rb:697 +#: src/include/ca-management/util.rb:1039 msgid "&Verify Password" msgstr "비밀번호 확인" -#. popup window header -#: src/include/ca-management/util.rb:421 +#. popup window header +#: src/include/ca-management/util.rb:421 msgid "LDAP Initialization" msgstr "LDAP 초기화" -#: src/include/ca-management/util.rb:423 +#: src/include/ca-management/util.rb:423 msgid "" "LDAP must initialize for the CA management.\n" "Enter the required LDAP password.\n" @@ -2468,136 +2262,125 @@ "CA 관리를 위해 LDAP를 초기화해야 합니다.\n" "필요한 LDAP 비밀번호를 입력하십시오.\n" -#: src/include/ca-management/util.rb:428 +#: src/include/ca-management/util.rb:428 msgid "P&assword:" msgstr "비밀번호" -#. popup window header -#: src/include/ca-management/util.rb:625 +#. popup window header +#: src/include/ca-management/util.rb:625 msgid "Export CA to File" msgstr "CA를 파일로 엑스포트" -#: src/include/ca-management/util.rb:636 +#: src/include/ca-management/util.rb:636 msgid "O&nly the Certificate in PEM Format" msgstr "PEM 형식의 인증서만(&N)" -#: src/include/ca-management/util.rb:644 -#: src/include/ca-management/util.rb:981 +#: src/include/ca-management/util.rb:644 src/include/ca-management/util.rb:981 msgid "Only the Key &Unencrypted in PEM Format" msgstr "암호화되지 않은 PEM 형식의 키만(&U)" -#: src/include/ca-management/util.rb:651 -#: src/include/ca-management/util.rb:988 +#: src/include/ca-management/util.rb:651 src/include/ca-management/util.rb:988 msgid "Only the &Key Encrypted in PEM Format" msgstr "암호화된 PEM 형식의 키만(&K)" -#: src/include/ca-management/util.rb:658 -#: src/include/ca-management/util.rb:995 +#: src/include/ca-management/util.rb:658 src/include/ca-management/util.rb:995 msgid "Ce&rtificate and the Key Unencrypted in PEM Format" msgstr "PEM 형식의 인증서 및 암호화되지 않은 키(&R)" #: src/include/ca-management/util.rb:665 -#: src/include/ca-management/util.rb:1002 +#: src/include/ca-management/util.rb:1002 msgid "C&ertificate and the Key Encrypted in PEM Format" msgstr "PEM 형식의 인증서 및 암호화된 키(&E)" #: src/include/ca-management/util.rb:672 -#: src/include/ca-management/util.rb:1009 +#: src/include/ca-management/util.rb:1009 msgid "&Certificate in DER Format" msgstr "DER 형식의 인증서(&C)" #: src/include/ca-management/util.rb:679 -#: src/include/ca-management/util.rb:1016 +#: src/include/ca-management/util.rb:1016 msgid "Cer&tificate and the Key in PKCS12 Format" msgstr "PKCS12 형식의 인증서 및 키(&T)" #: src/include/ca-management/util.rb:686 -#: src/include/ca-management/util.rb:1023 +#: src/include/ca-management/util.rb:1023 msgid "&Like PKCS12 and Include the CA Chain" msgstr "PKCS12와 유사하고 CA 체인 포함(&L)" #: src/include/ca-management/util.rb:693 -#: src/include/ca-management/util.rb:1035 +#: src/include/ca-management/util.rb:1035 msgid "&New Password" msgstr "새 비밀번호(&N)" -#. importCertificateFromDisk() - Importing certificate from disk -#. @return success -#: src/include/ca-management/util.rb:701 -#: src/include/ca-management/util.rb:865 -#: src/include/ca-management/util.rb:1043 -#: src/include/ca-management/util.rb:1204 -#: src/include/ca-management/util.rb:1485 +#. importCertificateFromDisk() - Importing certificate from disk +#. @return success +#: src/include/ca-management/util.rb:701 src/include/ca-management/util.rb:865 +#: src/include/ca-management/util.rb:1043 +#: src/include/ca-management/util.rb:1204 +#: src/include/ca-management/util.rb:1485 msgid "&File Name:" msgstr "파일 이름:(&F)" -#. export to file -#. reading certificate from disk -#. reading certificate from disk -#: src/include/ca-management/util.rb:783 -#: src/include/ca-management/util.rb:913 -#: src/include/ca-management/util.rb:1127 -#: src/include/ca-management/util.rb:1261 -#: src/include/ca-management/util.rb:1523 +#. export to file +#. reading certificate from disk +#. reading certificate from disk +#: src/include/ca-management/util.rb:783 src/include/ca-management/util.rb:913 +#: src/include/ca-management/util.rb:1127 +#: src/include/ca-management/util.rb:1261 +#: src/include/ca-management/util.rb:1523 msgid "File name required." msgstr "파일 이름이 필요합니다." -#: src/include/ca-management/util.rb:829 +#: src/include/ca-management/util.rb:829 msgid "CA saved to file." msgstr "CA를 파일에 저장" -#. popup window header -#: src/include/ca-management/util.rb:850 +#. popup window header +#: src/include/ca-management/util.rb:850 msgid "Export CRL to File" msgstr "CRL을 파일로 엑스포트" -#: src/include/ca-management/util.rb:858 +#: src/include/ca-management/util.rb:858 msgid "&PEM Format" msgstr "PEM 형식(&P)" -#: src/include/ca-management/util.rb:860 +#: src/include/ca-management/util.rb:860 msgid "&DER Format" msgstr "DER 형식(&D)" -#: src/include/ca-management/util.rb:941 +#: src/include/ca-management/util.rb:941 msgid "CRL saved to file." msgstr "CRL을 파일에 저장" -#. popup window header -#: src/include/ca-management/util.rb:962 +#. popup window header +#: src/include/ca-management/util.rb:962 msgid "Export Certificate to File" msgstr "인증서를 파일로 엑스포트" -#: src/include/ca-management/util.rb:973 +#: src/include/ca-management/util.rb:973 msgid "&Only the Certificate in PEM Format" msgstr "PEM 형식의 인증서만(&O)" -#: src/include/ca-management/util.rb:1184 +#: src/include/ca-management/util.rb:1184 msgid "Certificate saved to file." msgstr "인증서를 파일에 저장" -#. help text 1/3 -#: src/include/ca-management/util.rb:1216 +#. help text 1/3 +#: src/include/ca-management/util.rb:1216 msgid "" "<p><b><big>Importing Common Server Certificate (PKCS12 + CA Chain Format)\n" -" from Disk:</big></b> Select one file name and press <b>Next</b> to continue." -"</p>\n" +" from Disk:</big></b> Select one file name and press <b>Next</b> to continue.</p>\n" msgstr "" "<p><b><big>디스크에서 일반 서버 인증서(PKCS12 + CA 체인 형식)를\n" -" 임포트:</big></b> 계속하려면 파일 이름 하나를 선택하고 <b>다음</b>을 누르십" -"시오.</p>\n" +" 임포트:</big></b> 계속하려면 파일 이름 하나를 선택하고 <b>다음</b>을 누르십시오.</p>\n" -#. help text 2/3 -#: src/include/ca-management/util.rb:1222 -msgid "" -"Import a server certificate and corresponding CA and copy them to a place " -"where other YaST modules look for such a common certificate." -msgstr "" -"서버 인증서 및 해당 CA를 임포트하고 다른 YaST 모듈이 이러한 일반 인증서를 찾" -"는 장소에 복사합니다." +#. help text 2/3 +#: src/include/ca-management/util.rb:1222 +msgid "Import a server certificate and corresponding CA and copy them to a place where other YaST modules look for such a common certificate." +msgstr "서버 인증서 및 해당 CA를 임포트하고 다른 YaST 모듈이 이러한 일반 인증서를 찾는 장소에 복사합니다." -#. help text 3/3 -#: src/include/ca-management/util.rb:1230 +#. help text 3/3 +#: src/include/ca-management/util.rb:1230 msgid "" "<p><b>Password:</b><br>\n" "Certificate password</p>\n" @@ -2605,25 +2388,25 @@ "<p><b>비밀번호:</b><br>\n" "인증서 비밀번호</p>\n" -#: src/include/ca-management/util.rb:1236 +#: src/include/ca-management/util.rb:1236 msgid "Importing Common Certificate from Disk" msgstr "디스크에서 일반 인증서 임포트" -#: src/include/ca-management/util.rb:1267 +#: src/include/ca-management/util.rb:1267 msgid "Importing certificate..." msgstr "인증서를 임포트하는 중..." -#: src/include/ca-management/util.rb:1281 +#: src/include/ca-management/util.rb:1281 msgid "Certificate has been imported." msgstr "인증서를 임포트했습니다." -#. To translators: ContinueCancel Popup -#: src/include/ca-management/util.rb:1315 +#. To translators: ContinueCancel Popup +#: src/include/ca-management/util.rb:1315 msgid "This is not a server certificate. Continue?" msgstr "이것은 서버 인증서가 아닙니다. 계속하시겠습니까?" -#. check if hostname is in Subject Alt Name -#: src/include/ca-management/util.rb:1361 +#. check if hostname is in Subject Alt Name +#: src/include/ca-management/util.rb:1361 msgid "" "The common name of the certificate (%1) is not the name of·\n" "the server (%2).\n" @@ -2633,752 +2416,678 @@ "서버 이름(%2)과 다릅니다.\n" "이 인증서는 일반 서버 인증서로 실용적이지 않을 수 있습니다.\n" -#: src/include/ca-management/util.rb:1369 +#: src/include/ca-management/util.rb:1369 msgid "" "The hostname of this server (command: hostname --long) have to match \n" -"either the common name of the certificate (CN) or on of the values in " -"subject alternative names." +"either the common name of the certificate (CN) or on of the values in subject alternative names." msgstr "" "이 서버의 호스트 이름(명령: hostname --long)은 \n" "인증서 CN(일반 이름) 또는 주체 대체 이름 값 중 하나와 일치해야 합니다." -#. popup window header -#: src/include/ca-management/util.rb:1383 +#. popup window header +#: src/include/ca-management/util.rb:1383 msgid "Exporting as Common Server Certificate" msgstr "일반 서버 인증서로 엑스포트" -#. export to common certificate -#: src/include/ca-management/util.rb:1409 +#. export to common certificate +#: src/include/ca-management/util.rb:1409 msgid "Exporting certificate..." msgstr "인증서 엑스포트 중..." -#: src/include/ca-management/util.rb:1456 +#: src/include/ca-management/util.rb:1456 msgid "Certificate has been written as common server certificate." msgstr "인증서가 일반 서버 인증서로서 기록되었습니다." -#. importRequestFromDisk() - Importing request from disk -#. @param [String] CaName -#. @return success -#: src/include/ca-management/util.rb:1482 +#. importRequestFromDisk() - Importing request from disk +#. @param [String] CaName +#. @return success +#: src/include/ca-management/util.rb:1482 msgid "Import Request from Disk" msgstr "디스크에서 요청 임포트" -#: src/include/ca-management/util.rb:1537 +#: src/include/ca-management/util.rb:1537 msgid "File format not valid. Use PEM or DER files." msgstr "파일 형식이 잘못되었습니다. PEM 또는 DER 파일을 사용하십시오." -#: src/include/ca-management/util.rb:1541 -#: src/include/ca-management/util.rb:1671 +#: src/include/ca-management/util.rb:1541 +#: src/include/ca-management/util.rb:1671 msgid "Importing request..." msgstr "요청 임포트 중..." -#: src/include/ca-management/util.rb:1560 +#: src/include/ca-management/util.rb:1560 msgid "Request has been imported." msgstr "요청을 임포트했습니다." -#. importCAFromDisk() - Importing CA from disk -#. @return success -#: src/include/ca-management/util.rb:1584 +#. importCAFromDisk() - Importing CA from disk +#. @return success +#: src/include/ca-management/util.rb:1584 msgid "Import CA from Disk" msgstr "디스크에서 CA 임포트" -#: src/include/ca-management/util.rb:1587 +#: src/include/ca-management/util.rb:1587 msgid "&Path of CA Certificate" msgstr "CA 인증서 경로(&P)" -#: src/include/ca-management/util.rb:1597 +#: src/include/ca-management/util.rb:1597 msgid "&Path of Key" msgstr "키 경로(&P)" -#: src/include/ca-management/util.rb:1606 +#: src/include/ca-management/util.rb:1606 msgid "&Key Password" msgstr "키 비밀번호(&K)" -#. Error popup -#: src/include/ca-management/util.rb:1649 +#. Error popup +#: src/include/ca-management/util.rb:1649 msgid "Path to certificate file required." msgstr "인증서 파일에 대한 경로가 필요합니다." -#. Error popup -#: src/include/ca-management/util.rb:1653 +#. Error popup +#: src/include/ca-management/util.rb:1653 msgid "Path of the private key required." msgstr "개인 키의 경로가 필요합니다." -#. Error popup -#: src/include/ca-management/util.rb:1658 +#. Error popup +#: src/include/ca-management/util.rb:1658 msgid "" "Key Password is required. \n" -"It must be the password for the encrypted key or a new one in case of a not " -"encrypted key." +"It must be the password for the encrypted key or a new one in case of a not encrypted key." msgstr "" "키 비밀번호가 필요합니다. \n" -"암호화된 키의 비밀번호여야 하거나 또는 암호화된 키가 아닐 경우에는 새로운 비" -"밀번호여야 합니다." +"암호화된 키의 비밀번호여야 하거나 또는 암호화된 키가 아닐 경우에는 새로운 비밀번호여야 합니다." -#. Error popup -#: src/include/ca-management/util.rb:1693 +#. Error popup +#: src/include/ca-management/util.rb:1693 msgid "CA has been imported." msgstr "CA를 가져왔습니다." -#: src/modules/YaPI/CaManagement.pm:499 +#: src/modules/YaPI/CaManagement.pm:499 msgid "Cannot read CA list." msgstr "CA 목록을 읽을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:560 +#: src/modules/YaPI/CaManagement.pm:560 msgid "Cannot read CA tree." msgstr "CA 트리를 읽을 수 없습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:676 src/modules/YaPI/CaManagement.pm:1357 -#: src/modules/YaPI/CaManagement.pm:1849 -#: src/modules/YaPI/CaManagement.pm:2124 -#: src/modules/YaPI/CaManagement.pm:2880 -#: src/modules/YaPI/CaManagement.pm:2978 -#: src/modules/YaPI/CaManagement.pm:4429 -#: src/modules/YaPI/CaManagement.pm:7306 -#: src/modules/YaPI/CaManagement.pm:7429 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:676 src/modules/YaPI/CaManagement.pm:1357 +#: src/modules/YaPI/CaManagement.pm:1849 src/modules/YaPI/CaManagement.pm:2124 +#: src/modules/YaPI/CaManagement.pm:2880 src/modules/YaPI/CaManagement.pm:2978 +#: src/modules/YaPI/CaManagement.pm:4429 src/modules/YaPI/CaManagement.pm:7306 +#: src/modules/YaPI/CaManagement.pm:7429 msgid "Missing value 'caName'." msgstr "'caName' 값이 누락되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:683 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:683 msgid "Missing value 'keyPasswd' or password is too short." msgstr "'keyPasswd' 값이 누락되었거나 비밀번호가 너무 짧습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:688 src/modules/YaPI/CaManagement.pm:1861 -#: src/modules/YaPI/CaManagement.pm:4451 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:688 src/modules/YaPI/CaManagement.pm:1861 +#: src/modules/YaPI/CaManagement.pm:4451 msgid "Missing value 'commonName'." msgstr "'commonName' 값이 누락되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:694 src/modules/YaPI/CaManagement.pm:4457 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:694 src/modules/YaPI/CaManagement.pm:4457 msgid "According to 'basicConstraints', this is not a CA." msgstr "'basicConstraints'에 의하면 이것은 CA가 아닙니다." -#: src/modules/YaPI/CaManagement.pm:781 src/modules/YaPI/CaManagement.pm:1604 -#: src/modules/YaPI/CaManagement.pm:2004 -#: src/modules/YaPI/CaManagement.pm:4604 +#: src/modules/YaPI/CaManagement.pm:781 src/modules/YaPI/CaManagement.pm:1604 +#: src/modules/YaPI/CaManagement.pm:2004 src/modules/YaPI/CaManagement.pm:4604 msgid "Modifying RequestGenerationData failed." msgstr "RequestGenerationData 수정에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:921 src/modules/YaPI/CaManagement.pm:1532 -#: src/modules/YaPI/CaManagement.pm:2306 -#: src/modules/YaPI/CaManagement.pm:4735 +#: src/modules/YaPI/CaManagement.pm:921 src/modules/YaPI/CaManagement.pm:1532 +#: src/modules/YaPI/CaManagement.pm:2306 src/modules/YaPI/CaManagement.pm:4735 msgid "Modifying CertificateIssueData failed." msgstr "CertificateIssueData 수정에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:945 +#: src/modules/YaPI/CaManagement.pm:945 msgid "Creating Root CA failed." msgstr "루트 CA 작성에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:1055 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:1055 msgid "Missing parameter 'certType'." msgstr "'certType' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:1260 -#: src/modules/YaPI/CaManagement.pm:7244 +#: src/modules/YaPI/CaManagement.pm:1260 src/modules/YaPI/CaManagement.pm:7244 msgid "Getting defaults failed." msgstr "초기값을 얻는 데 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:1364 -#: src/modules/YaPI/CaManagement.pm:2140 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:1364 src/modules/YaPI/CaManagement.pm:2140 msgid "Missing value 'certType'." msgstr "'certType' 값이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:1385 -#: src/modules/YaPI/CaManagement.pm:1887 -#: src/modules/YaPI/CaManagement.pm:2166 -#: src/modules/YaPI/CaManagement.pm:3007 -#: src/modules/YaPI/CaManagement.pm:3322 -#: src/modules/YaPI/CaManagement.pm:3614 -#: src/modules/YaPI/CaManagement.pm:3788 -#: src/modules/YaPI/CaManagement.pm:4122 -#: src/modules/YaPI/CaManagement.pm:4487 -#: src/modules/YaPI/CaManagement.pm:6127 -#: src/modules/YaPI/CaManagement.pm:6813 -#: src/modules/YaPI/CaManagement.pm:7327 +#: src/modules/YaPI/CaManagement.pm:1385 src/modules/YaPI/CaManagement.pm:1887 +#: src/modules/YaPI/CaManagement.pm:2166 src/modules/YaPI/CaManagement.pm:3007 +#: src/modules/YaPI/CaManagement.pm:3322 src/modules/YaPI/CaManagement.pm:3614 +#: src/modules/YaPI/CaManagement.pm:3788 src/modules/YaPI/CaManagement.pm:4122 +#: src/modules/YaPI/CaManagement.pm:4487 src/modules/YaPI/CaManagement.pm:6127 +#: src/modules/YaPI/CaManagement.pm:6813 src/modules/YaPI/CaManagement.pm:7327 msgid "Initializing the CA failed." msgstr "CA 초기화에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:1635 -#: src/modules/YaPI/CaManagement.pm:7370 +#: src/modules/YaPI/CaManagement.pm:1635 src/modules/YaPI/CaManagement.pm:7370 msgid "Writing the defaults failed." msgstr "기본값을 기록하는 데 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:1696 -#: src/modules/YaPI/CaManagement.pm:2760 -#: src/modules/YaPI/CaManagement.pm:3115 -#: src/modules/YaPI/CaManagement.pm:3267 -#: src/modules/YaPI/CaManagement.pm:3559 -#: src/modules/YaPI/CaManagement.pm:3720 -#: src/modules/YaPI/CaManagement.pm:4070 -#: src/modules/YaPI/CaManagement.pm:4251 -#: src/modules/YaPI/CaManagement.pm:4822 -#: src/modules/YaPI/CaManagement.pm:5078 -#: src/modules/YaPI/CaManagement.pm:5867 -#: src/modules/YaPI/CaManagement.pm:6098 -#: src/modules/YaPI/CaManagement.pm:6529 -#: src/modules/YaPI/CaManagement.pm:6895 -#: src/modules/YaPI/CaManagement.pm:6983 -#: src/modules/YaPI/CaManagement.pm:7089 -#: src/modules/YaPI/CaManagement.pm:7194 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:1696 src/modules/YaPI/CaManagement.pm:2760 +#: src/modules/YaPI/CaManagement.pm:3115 src/modules/YaPI/CaManagement.pm:3267 +#: src/modules/YaPI/CaManagement.pm:3559 src/modules/YaPI/CaManagement.pm:3720 +#: src/modules/YaPI/CaManagement.pm:4070 src/modules/YaPI/CaManagement.pm:4251 +#: src/modules/YaPI/CaManagement.pm:4822 src/modules/YaPI/CaManagement.pm:5078 +#: src/modules/YaPI/CaManagement.pm:5867 src/modules/YaPI/CaManagement.pm:6098 +#: src/modules/YaPI/CaManagement.pm:6529 src/modules/YaPI/CaManagement.pm:6895 +#: src/modules/YaPI/CaManagement.pm:6983 src/modules/YaPI/CaManagement.pm:7089 +#: src/modules/YaPI/CaManagement.pm:7194 msgid "Invalid value for parameter 'caName'." msgstr "'caName' 매개변수에 대한 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:1704 -#: src/modules/YaPI/CaManagement.pm:2768 -#: src/modules/YaPI/CaManagement.pm:3123 -#: src/modules/YaPI/CaManagement.pm:5465 -#: src/modules/YaPI/CaManagement.pm:6537 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:1704 src/modules/YaPI/CaManagement.pm:2768 +#: src/modules/YaPI/CaManagement.pm:3123 src/modules/YaPI/CaManagement.pm:5465 +#: src/modules/YaPI/CaManagement.pm:6537 msgid "Invalid value for parameter 'type'." msgstr "'type' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:1750 +#: src/modules/YaPI/CaManagement.pm:1750 msgid "Parsing the CA failed." msgstr "CA 구문 분석에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:1856 -#: src/modules/YaPI/CaManagement.pm:4441 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:1856 src/modules/YaPI/CaManagement.pm:4441 msgid "Missing value 'keyPasswd'." msgstr "'keyPasswd' 값이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:2018 +#: src/modules/YaPI/CaManagement.pm:2018 msgid "Creating request failed." msgstr "요청을 작성하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:2129 +#: src/modules/YaPI/CaManagement.pm:2129 msgid "Missing value 'request'" msgstr "'request' 값이 누락되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:2135 -#: src/modules/YaPI/CaManagement.pm:2887 -#: src/modules/YaPI/CaManagement.pm:2984 -#: src/modules/YaPI/CaManagement.pm:4446 -#: src/modules/YaPI/CaManagement.pm:7007 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:2135 src/modules/YaPI/CaManagement.pm:2887 +#: src/modules/YaPI/CaManagement.pm:2984 src/modules/YaPI/CaManagement.pm:4446 +#: src/modules/YaPI/CaManagement.pm:7007 msgid "Missing value 'caPasswd'." msgstr "'caPasswd' 값이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:2320 +#: src/modules/YaPI/CaManagement.pm:2320 msgid "Signing certificate failed." msgstr "인증서 서명에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:2547 -#: src/modules/YaPI/CaManagement.pm:2652 -#: src/modules/YaPI/CaManagement.pm:6664 -#: src/modules/YaPI/CaManagement.pm:6770 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:2547 src/modules/YaPI/CaManagement.pm:2652 +#: src/modules/YaPI/CaManagement.pm:6664 src/modules/YaPI/CaManagement.pm:6770 msgid "Missing parameter 'caName'." msgstr "'caName' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:2553 +#: src/modules/YaPI/CaManagement.pm:2553 msgid "Missing parameter 'caPasswd'." msgstr "'caPasswd' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:2601 +#: src/modules/YaPI/CaManagement.pm:2601 msgid "Getting the certificate list failed." msgstr "인증서 목록을 가져오는 데 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:2658 -#: src/modules/YaPI/CaManagement.pm:3303 -#: src/modules/YaPI/CaManagement.pm:3566 -#: src/modules/YaPI/CaManagement.pm:3727 -#: src/modules/YaPI/CaManagement.pm:4077 -#: src/modules/YaPI/CaManagement.pm:7096 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:2658 src/modules/YaPI/CaManagement.pm:3303 +#: src/modules/YaPI/CaManagement.pm:3566 src/modules/YaPI/CaManagement.pm:3727 +#: src/modules/YaPI/CaManagement.pm:4077 src/modules/YaPI/CaManagement.pm:7096 msgid "Invalid value for parameter 'caPasswd'." msgstr "'caPasswd' 매개변수에 대한 값이 잘못되었습니다." -#. error message; displayed in an popup dialog -#: src/modules/YaPI/CaManagement.pm:2685 +#. error message; displayed in an popup dialog +#: src/modules/YaPI/CaManagement.pm:2685 msgid "Invalid password." msgstr "비밀번호가 잘못되었습니다." -#. error message; displayed in an popup dialog -#: src/modules/YaPI/CaManagement.pm:2692 +#. error message; displayed in an popup dialog +#: src/modules/YaPI/CaManagement.pm:2692 msgid "UpdateDB failed." msgstr "데이터베이스 업데이트에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:2775 -#: src/modules/YaPI/CaManagement.pm:3733 -#: src/modules/YaPI/CaManagement.pm:4258 -#: src/modules/YaPI/CaManagement.pm:5874 -#: src/modules/YaPI/CaManagement.pm:6105 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:2775 src/modules/YaPI/CaManagement.pm:3733 +#: src/modules/YaPI/CaManagement.pm:4258 src/modules/YaPI/CaManagement.pm:5874 +#: src/modules/YaPI/CaManagement.pm:6105 msgid "Invalid value for parameter 'certificate'." msgstr "'certificate' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:2821 +#: src/modules/YaPI/CaManagement.pm:2821 msgid "Parsing the certificate failed." msgstr "인증서 구문 분석에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:2892 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:2892 msgid "Missing value 'certificate'." msgstr "'certificate' 값이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:2923 +#: src/modules/YaPI/CaManagement.pm:2923 msgid "Revoking the certificate failed." msgstr "인증서를 해지하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:2988 +#: src/modules/YaPI/CaManagement.pm:2988 msgid "Missing value 'days'." msgstr "'days' 값이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:3041 -#: src/modules/YaPI/CaManagement.pm:7359 +#: src/modules/YaPI/CaManagement.pm:3041 src/modules/YaPI/CaManagement.pm:7359 msgid "Modifying CRLGenerationData failed." msgstr "CRLGenerationData 수정에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:3053 +#: src/modules/YaPI/CaManagement.pm:3053 msgid "Creating the CRL failed." msgstr "CRL 작성에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:3173 +#: src/modules/YaPI/CaManagement.pm:3173 msgid "No CRL available." msgstr "사용할 수 있는 CRL이 없습니다." -#: src/modules/YaPI/CaManagement.pm:3177 +#: src/modules/YaPI/CaManagement.pm:3177 msgid "Parsing the CRL failed." msgstr "CRL 구문 분석에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:3277 -#: src/modules/YaPI/CaManagement.pm:3578 -#: src/modules/YaPI/CaManagement.pm:3586 -#: src/modules/YaPI/CaManagement.pm:3742 -#: src/modules/YaPI/CaManagement.pm:4093 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:3277 src/modules/YaPI/CaManagement.pm:3578 +#: src/modules/YaPI/CaManagement.pm:3586 src/modules/YaPI/CaManagement.pm:3742 +#: src/modules/YaPI/CaManagement.pm:4093 #, perl-format msgid "Cannot parse destinationFile %s." msgstr "대상 파일 %s을(를) 해석할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:3284 -#: src/modules/YaPI/CaManagement.pm:3593 -#: src/modules/YaPI/CaManagement.pm:3749 -#: src/modules/YaPI/CaManagement.pm:4100 +#: src/modules/YaPI/CaManagement.pm:3284 src/modules/YaPI/CaManagement.pm:3593 +#: src/modules/YaPI/CaManagement.pm:3749 src/modules/YaPI/CaManagement.pm:4100 msgid "Directory does not exist." msgstr "디렉토리가 없습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:3296 -#: src/modules/YaPI/CaManagement.pm:3761 -#: src/modules/YaPI/CaManagement.pm:4084 -#: src/modules/YaPI/CaManagement.pm:4175 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:3296 src/modules/YaPI/CaManagement.pm:3761 +#: src/modules/YaPI/CaManagement.pm:4084 src/modules/YaPI/CaManagement.pm:4175 msgid "Invalid value for parameter 'exportFormat'." msgstr "'exportFormat' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:3345 -#: src/modules/YaPI/CaManagement.pm:3367 -#: src/modules/YaPI/CaManagement.pm:3389 -#: src/modules/YaPI/CaManagement.pm:3416 -#: src/modules/YaPI/CaManagement.pm:3442 -#: src/modules/YaPI/CaManagement.pm:3464 -#: src/modules/YaPI/CaManagement.pm:3492 -#: src/modules/YaPI/CaManagement.pm:3522 -#: src/modules/YaPI/CaManagement.pm:3811 -#: src/modules/YaPI/CaManagement.pm:3835 -#: src/modules/YaPI/CaManagement.pm:3859 -#: src/modules/YaPI/CaManagement.pm:3889 -#: src/modules/YaPI/CaManagement.pm:3918 -#: src/modules/YaPI/CaManagement.pm:3940 -#: src/modules/YaPI/CaManagement.pm:3971 -#: src/modules/YaPI/CaManagement.pm:4001 -#: src/modules/YaPI/CaManagement.pm:4146 -#: src/modules/YaPI/CaManagement.pm:4168 +#: src/modules/YaPI/CaManagement.pm:3345 src/modules/YaPI/CaManagement.pm:3367 +#: src/modules/YaPI/CaManagement.pm:3389 src/modules/YaPI/CaManagement.pm:3416 +#: src/modules/YaPI/CaManagement.pm:3442 src/modules/YaPI/CaManagement.pm:3464 +#: src/modules/YaPI/CaManagement.pm:3492 src/modules/YaPI/CaManagement.pm:3522 +#: src/modules/YaPI/CaManagement.pm:3811 src/modules/YaPI/CaManagement.pm:3835 +#: src/modules/YaPI/CaManagement.pm:3859 src/modules/YaPI/CaManagement.pm:3889 +#: src/modules/YaPI/CaManagement.pm:3918 src/modules/YaPI/CaManagement.pm:3940 +#: src/modules/YaPI/CaManagement.pm:3971 src/modules/YaPI/CaManagement.pm:4001 +#: src/modules/YaPI/CaManagement.pm:4146 src/modules/YaPI/CaManagement.pm:4168 msgid "Export failed." msgstr "엑스포트에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:3472 -#: src/modules/YaPI/CaManagement.pm:3501 -#: src/modules/YaPI/CaManagement.pm:3949 -#: src/modules/YaPI/CaManagement.pm:3979 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:3472 src/modules/YaPI/CaManagement.pm:3501 +#: src/modules/YaPI/CaManagement.pm:3949 src/modules/YaPI/CaManagement.pm:3979 msgid "Parameter 'P12Password' missing." msgstr "'P12Password' 매개변수가 누락되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:3572 -#: src/modules/YaPI/CaManagement.pm:6544 -#: src/modules/YaPI/CaManagement.pm:6902 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:3572 src/modules/YaPI/CaManagement.pm:6544 +#: src/modules/YaPI/CaManagement.pm:6902 msgid "Invalid value for parameter 'request'." msgstr "'request' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:3625 +#: src/modules/YaPI/CaManagement.pm:3625 msgid "Request not found in" msgstr "요청을 찾을 수 없음" -#: src/modules/YaPI/CaManagement.pm:3628 +#: src/modules/YaPI/CaManagement.pm:3628 msgid "Copy Request failed" msgstr "복사 요청 실패" -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:3768 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:3768 msgid "Invalid value for parameter 'keyPasswd'." msgstr "'keyPasswd' 매개변수에 대한 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:4289 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:4289 msgid "Invalid value for parameter 'purpose'." msgstr "'purpose' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:4303 +#: src/modules/YaPI/CaManagement.pm:4303 msgid "Verification failed." msgstr "확인에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:4435 +#: src/modules/YaPI/CaManagement.pm:4435 msgid "Missing value 'newCaName'." msgstr "'newCaName' 값이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:4750 +#: src/modules/YaPI/CaManagement.pm:4750 msgid "Creating the SubCA failed." msgstr "하위 CA 작성에 실패했습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:4833 -#: src/modules/YaPI/CaManagement.pm:5089 -#: src/modules/YaPI/CaManagement.pm:5890 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:4833 src/modules/YaPI/CaManagement.pm:5089 +#: src/modules/YaPI/CaManagement.pm:5890 msgid "Invalid value for parameter 'ldapHostname'." msgstr "'ldapHostname' 매개변수에 대한 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:4845 -#: src/modules/YaPI/CaManagement.pm:5101 -#: src/modules/YaPI/CaManagement.pm:5902 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:4845 src/modules/YaPI/CaManagement.pm:5101 +#: src/modules/YaPI/CaManagement.pm:5902 msgid "Invalid value for parameter 'ldapPort'." msgstr "'ldapPort' 매개변수에 대한 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:4854 -#: src/modules/YaPI/CaManagement.pm:4860 -#: src/modules/YaPI/CaManagement.pm:5110 -#: src/modules/YaPI/CaManagement.pm:5115 -#: src/modules/YaPI/CaManagement.pm:5909 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:4854 src/modules/YaPI/CaManagement.pm:4860 +#: src/modules/YaPI/CaManagement.pm:5110 src/modules/YaPI/CaManagement.pm:5115 +#: src/modules/YaPI/CaManagement.pm:5909 msgid "Invalid value for parameter 'destinationDN'." msgstr "'destinationDN' 매개변수에 대한 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:4880 -#: src/modules/YaPI/CaManagement.pm:5135 -#: src/modules/YaPI/CaManagement.pm:5916 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:4880 src/modules/YaPI/CaManagement.pm:5135 +#: src/modules/YaPI/CaManagement.pm:5916 msgid "Invalid value for parameter 'BindDN'." msgstr "'BindDN' 매개변수에 대한 값이 잘못되었습니다." -#. parameter check failed -#: src/modules/YaPI/CaManagement.pm:4887 -#: src/modules/YaPI/CaManagement.pm:5142 -#: src/modules/YaPI/CaManagement.pm:5923 +#. parameter check failed +#: src/modules/YaPI/CaManagement.pm:4887 src/modules/YaPI/CaManagement.pm:5142 +#: src/modules/YaPI/CaManagement.pm:5923 msgid "Invalid value for parameter 'ldapPasswd'." msgstr "'ldapPasswd' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:4893 +#: src/modules/YaPI/CaManagement.pm:4893 msgid "CA certificate does not exist." msgstr "CA 인증서가 존재하지 않습니다." -#: src/modules/YaPI/CaManagement.pm:4904 +#: src/modules/YaPI/CaManagement.pm:4904 msgid "Cannot read the CA." msgstr "CA를 읽을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:4912 +#: src/modules/YaPI/CaManagement.pm:4912 msgid "Cannot parse the CA certificate." msgstr "CA 인증을 해석할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:4933 -#: src/modules/YaPI/CaManagement.pm:5188 -#: src/modules/YaPI/CaManagement.pm:5521 -#: src/modules/YaPI/CaManagement.pm:5685 -#: src/modules/YaPI/CaManagement.pm:5977 +#: src/modules/YaPI/CaManagement.pm:4933 src/modules/YaPI/CaManagement.pm:5188 +#: src/modules/YaPI/CaManagement.pm:5521 src/modules/YaPI/CaManagement.pm:5685 +#: src/modules/YaPI/CaManagement.pm:5977 msgid "LDAP initialization failed." msgstr "LDAP 초기화에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:4940 -#: src/modules/YaPI/CaManagement.pm:5195 -#: src/modules/YaPI/CaManagement.pm:5528 -#: src/modules/YaPI/CaManagement.pm:5694 -#: src/modules/YaPI/CaManagement.pm:5984 +#: src/modules/YaPI/CaManagement.pm:4940 src/modules/YaPI/CaManagement.pm:5195 +#: src/modules/YaPI/CaManagement.pm:5528 src/modules/YaPI/CaManagement.pm:5694 +#: src/modules/YaPI/CaManagement.pm:5984 msgid "LDAP bind failed." msgstr "LDAP 바인드에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:4953 -#: src/modules/YaPI/CaManagement.pm:5208 +#: src/modules/YaPI/CaManagement.pm:4953 src/modules/YaPI/CaManagement.pm:5208 #, perl-format msgid "Container %s is not available in the LDAP directory." msgstr "%s 컨테이너를 LDAP 디렉토리에서 사용할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:4971 -#: src/modules/YaPI/CaManagement.pm:5227 -#: src/modules/YaPI/CaManagement.pm:5244 +#: src/modules/YaPI/CaManagement.pm:4971 src/modules/YaPI/CaManagement.pm:5227 +#: src/modules/YaPI/CaManagement.pm:5244 msgid "Error while searching in LDAP." msgstr "LDAP에서 검색 중에 오류가 발생했습니다." -#: src/modules/YaPI/CaManagement.pm:4990 +#: src/modules/YaPI/CaManagement.pm:4990 msgid "Cannot add CA certificate to the LDAP directory." msgstr "LDAP 디렉토리에 CA 인증을 추가할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5002 +#: src/modules/YaPI/CaManagement.pm:5002 msgid "Cannot modify CA certificate in the LDAP directory." msgstr "LDAP 디렉토리의 CA 인증을 수정할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5148 +#: src/modules/YaPI/CaManagement.pm:5148 msgid "CRL does not exist." msgstr "CRL이 존재하지 않습니다." -#: src/modules/YaPI/CaManagement.pm:5159 +#: src/modules/YaPI/CaManagement.pm:5159 msgid "Cannot read the CRL." msgstr "CRL을 읽을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5167 +#: src/modules/YaPI/CaManagement.pm:5167 msgid "Cannot parse the CRL." msgstr "CRL을 해석할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5265 +#: src/modules/YaPI/CaManagement.pm:5265 msgid "Cannot add the CRL to the LDAP directory." msgstr "LDAP 디렉토리에 CRL을 추가할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5278 +#: src/modules/YaPI/CaManagement.pm:5278 msgid "Cannot modify the CRL in the LDAP directory." msgstr "LDAP 디렉토리의 CRL을 수정할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5381 +#: src/modules/YaPI/CaManagement.pm:5381 msgid "Checking for new CRL Distribution Point failed." msgstr "새 CRL 배포 지점을 확인하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:5474 +#: src/modules/YaPI/CaManagement.pm:5474 msgid "Missing parameter 'commonName'." msgstr "'commonName' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:5506 -#: src/modules/YaPI/CaManagement.pm:5677 +#: src/modules/YaPI/CaManagement.pm:5506 src/modules/YaPI/CaManagement.pm:5677 msgid "No LDAP server configured." msgstr "구성된 LDAP 서버가 없습니다." -#: src/modules/YaPI/CaManagement.pm:5546 -#: src/modules/YaPI/CaManagement.pm:5564 -#: src/modules/YaPI/CaManagement.pm:5609 -#: src/modules/YaPI/CaManagement.pm:5723 -#: src/modules/YaPI/CaManagement.pm:5739 -#: src/modules/YaPI/CaManagement.pm:5772 +#: src/modules/YaPI/CaManagement.pm:5546 src/modules/YaPI/CaManagement.pm:5564 +#: src/modules/YaPI/CaManagement.pm:5609 src/modules/YaPI/CaManagement.pm:5723 +#: src/modules/YaPI/CaManagement.pm:5739 src/modules/YaPI/CaManagement.pm:5772 msgid "LDAP search failed." msgstr "LDAP 검색에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:5574 +#: src/modules/YaPI/CaManagement.pm:5574 msgid "No configuration available in LDAP." msgstr "LDAP에 사용할 수 있는 구성이 없습니다." -#: src/modules/YaPI/CaManagement.pm:5663 +#: src/modules/YaPI/CaManagement.pm:5663 msgid "LDAP password required." msgstr "LDAP 비밀번호가 필요합니다." -#: src/modules/YaPI/CaManagement.pm:5717 +#: src/modules/YaPI/CaManagement.pm:5717 msgid "Cannot add base configuration entry." msgstr "기본 구성 항목을 추가할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5767 -#: src/modules/YaPI/CaManagement.pm:5789 +#: src/modules/YaPI/CaManagement.pm:5767 src/modules/YaPI/CaManagement.pm:5789 msgid "Cannot add CA configuration entry." msgstr "CA 구성 항목을 추가할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5929 +#: src/modules/YaPI/CaManagement.pm:5929 msgid "Certificate does not exist." msgstr "인증서가 존재하지 않습니다." -#: src/modules/YaPI/CaManagement.pm:5956 +#: src/modules/YaPI/CaManagement.pm:5956 msgid "Cannot parse the certificate." msgstr "인증을 해석할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:5997 +#: src/modules/YaPI/CaManagement.pm:5997 #, perl-format msgid "%s is not available in the LDAP directory." msgstr "LDAP 디렉토리에서 %s을(를) 사용할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6008 +#: src/modules/YaPI/CaManagement.pm:6008 msgid "Cannot modify userCertificate in the LDAP directory." msgstr "LDAP 디렉토리의 사용자 인증을 수정할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6026 +#: src/modules/YaPI/CaManagement.pm:6026 msgid "Exporting the certificate failed." msgstr "인증서를 엑스포트하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6037 +#: src/modules/YaPI/CaManagement.pm:6037 msgid "Cannot modify userPKCS12 in LDAP directory." msgstr "LDAP 디렉토리의 userPKCS12를 수정할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6139 +#: src/modules/YaPI/CaManagement.pm:6139 msgid "Deleting the certificate failed." msgstr "인증서를 삭제하는 데 실패했습니다." -#. parameter check -#: src/modules/YaPI/CaManagement.pm:6207 +#. parameter check +#: src/modules/YaPI/CaManagement.pm:6207 msgid "Path to certificate file is needed." msgstr "인증서 파일에 대한 경로가 필요합니다." -#: src/modules/YaPI/CaManagement.pm:6214 +#: src/modules/YaPI/CaManagement.pm:6214 msgid "Certificate not found in" msgstr "인증서를 찾을 수 없습니다." -#. parameter check -#: src/modules/YaPI/CaManagement.pm:6220 +#. parameter check +#: src/modules/YaPI/CaManagement.pm:6220 msgid "Password is required." msgstr "비밀번호는 필수입니다." -#: src/modules/YaPI/CaManagement.pm:6232 +#: src/modules/YaPI/CaManagement.pm:6232 msgid "Importing the certificate failed." msgstr "인증서를 임포트하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6321 +#: src/modules/YaPI/CaManagement.pm:6321 msgid "Missing parameter 'inFile'." msgstr "매개변수 'inFile'이 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:6326 +#: src/modules/YaPI/CaManagement.pm:6326 msgid "File not found." msgstr "파일을 찾을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6332 +#: src/modules/YaPI/CaManagement.pm:6332 msgid "Missing parameter 'type'." msgstr "'type' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:6336 +#: src/modules/YaPI/CaManagement.pm:6336 #, perl-format msgid "Invalid value '%s' in 'type'." msgstr "'type'의 값 '%s'이(가) 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:6343 +#: src/modules/YaPI/CaManagement.pm:6343 msgid "Missing parameter 'datatype'." msgstr "'datatype' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:6347 +#: src/modules/YaPI/CaManagement.pm:6347 #, perl-format msgid "Unknown value '%s' in 'datatype'." msgstr "알 수 없는 값 '%s'이(가) 'datatype'에 있습니다." -#: src/modules/YaPI/CaManagement.pm:6353 +#: src/modules/YaPI/CaManagement.pm:6353 msgid "Missing parameter 'inForm'." msgstr "'inForm' 매개변수가 누락되었습니다." -#: src/modules/YaPI/CaManagement.pm:6357 +#: src/modules/YaPI/CaManagement.pm:6357 #, perl-format msgid "Unknown value '%s' in 'inForm'." msgstr "알 수 없는 값 '%s'이(가) 'inForm'에 있습니다." -#: src/modules/YaPI/CaManagement.pm:6462 +#: src/modules/YaPI/CaManagement.pm:6462 msgid "Parsing failed." msgstr "구문 분석에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6590 +#: src/modules/YaPI/CaManagement.pm:6590 msgid "Parsing the request failed." msgstr "요청 구문 분석에 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6704 +#: src/modules/YaPI/CaManagement.pm:6704 msgid "Getting the request list failed." msgstr "요청 목록을 가져오는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6779 +#: src/modules/YaPI/CaManagement.pm:6779 #, perl-format msgid "Request not found in %s." msgstr "%s에서 요청을 찾을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6786 +#: src/modules/YaPI/CaManagement.pm:6786 msgid "Cannot read the request." msgstr "요청을 읽을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6792 +#: src/modules/YaPI/CaManagement.pm:6792 msgid "No request data found." msgstr "요청 데이터를 찾을 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:6835 +#: src/modules/YaPI/CaManagement.pm:6835 msgid "Importing the request failed." msgstr "요청을 임포트하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6926 +#: src/modules/YaPI/CaManagement.pm:6926 msgid "Deleting the request failed." msgstr "요청을 삭제하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:6989 +#: src/modules/YaPI/CaManagement.pm:6989 msgid "Invalid value for parameter 'caCertificate'." msgstr "'caCertificate' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:6994 +#: src/modules/YaPI/CaManagement.pm:6994 msgid "Invalid value for parameter 'caKey'." msgstr "'caKey' 매개변수에 대한 값이 잘못되었습니다." -#: src/modules/YaPI/CaManagement.pm:7001 +#: src/modules/YaPI/CaManagement.pm:7001 #, perl-format msgid "CA key not available in %s." msgstr "%s에서 CA 키를 사용할 수 없습니다." -#: src/modules/YaPI/CaManagement.pm:7030 +#: src/modules/YaPI/CaManagement.pm:7030 msgid "Importing the CA failed." msgstr "CA를 임포트하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:7127 +#: src/modules/YaPI/CaManagement.pm:7127 msgid "Deleting the CA failed." msgstr "CA를 삭제하는 데 실패했습니다." -#: src/modules/YaPI/CaManagement.pm:7467 -#: src/modules/YaPI/CaManagement.pm:7483 +#: src/modules/YaPI/CaManagement.pm:7467 src/modules/YaPI/CaManagement.pm:7483 msgid "Keyfile does not exist." msgstr "키파일이 존재하지 않습니다." -#: src/modules/YaPI/CaManagement.pm:7502 +#: src/modules/YaPI/CaManagement.pm:7502 msgid "Password change failed." msgstr "비밀번호 변경에 실패했습니다." -#: src/modules/YaST/caUtils.pm:235 +#: src/modules/YaST/caUtils.pm:235 #, perl-format msgid "Invalid type for StringExtension '%s'." msgstr "StringExtension '%s' 입력이 잘못되었습니다." -#: src/modules/YaST/caUtils.pm:1881 +#: src/modules/YaST/caUtils.pm:1881 msgid "Missing 'data' map." msgstr "'data' 맵이 누락되었습니다." -#: src/modules/YaST/caUtils.pm:1890 src/modules/YaST/caUtils.pm:1894 -#: src/modules/YaST/caUtils.pm:1900 src/modules/YaST/caUtils.pm:1906 -#: src/modules/YaST/caUtils.pm:1912 src/modules/YaST/caUtils.pm:1925 -#: src/modules/YaST/caUtils.pm:1932 src/modules/YaST/caUtils.pm:1941 -#: src/modules/YaST/caUtils.pm:1950 src/modules/YaST/caUtils.pm:1956 -#: src/modules/YaST/caUtils.pm:1979 src/modules/YaST/caUtils.pm:2000 -#: src/modules/YaST/caUtils.pm:2005 src/modules/YaST/caUtils.pm:2022 -#: src/modules/YaST/caUtils.pm:2027 src/modules/YaST/caUtils.pm:2041 -#: src/modules/YaST/caUtils.pm:2045 src/modules/YaST/caUtils.pm:2060 -#: src/modules/YaST/caUtils.pm:2064 src/modules/YaST/caUtils.pm:2082 -#: src/modules/YaST/caUtils.pm:2089 src/modules/YaST/caUtils.pm:2096 -#: src/modules/YaST/caUtils.pm:2103 src/modules/YaST/caUtils.pm:2110 -#: src/modules/YaST/caUtils.pm:2117 src/modules/YaST/caUtils.pm:2124 -#: src/modules/YaST/caUtils.pm:2130 src/modules/YaST/caUtils.pm:2137 -#: src/modules/YaST/caUtils.pm:2152 src/modules/YaST/caUtils.pm:2164 -#: src/modules/YaST/caUtils.pm:2182 src/modules/YaST/caUtils.pm:2187 -#: src/modules/YaST/caUtils.pm:2206 src/modules/YaST/caUtils.pm:2213 -#: src/modules/YaST/caUtils.pm:2220 src/modules/YaST/caUtils.pm:2227 -#: src/modules/YaST/caUtils.pm:2234 src/modules/YaST/caUtils.pm:2240 -#: src/modules/YaST/caUtils.pm:2246 src/modules/YaST/caUtils.pm:2252 -#: src/modules/YaST/caUtils.pm:2267 src/modules/YaST/caUtils.pm:2273 -#: src/modules/YaST/caUtils.pm:2279 +#: src/modules/YaST/caUtils.pm:1890 src/modules/YaST/caUtils.pm:1894 +#: src/modules/YaST/caUtils.pm:1900 src/modules/YaST/caUtils.pm:1906 +#: src/modules/YaST/caUtils.pm:1912 src/modules/YaST/caUtils.pm:1925 +#: src/modules/YaST/caUtils.pm:1932 src/modules/YaST/caUtils.pm:1941 +#: src/modules/YaST/caUtils.pm:1950 src/modules/YaST/caUtils.pm:1956 +#: src/modules/YaST/caUtils.pm:1979 src/modules/YaST/caUtils.pm:2000 +#: src/modules/YaST/caUtils.pm:2005 src/modules/YaST/caUtils.pm:2022 +#: src/modules/YaST/caUtils.pm:2027 src/modules/YaST/caUtils.pm:2041 +#: src/modules/YaST/caUtils.pm:2045 src/modules/YaST/caUtils.pm:2060 +#: src/modules/YaST/caUtils.pm:2064 src/modules/YaST/caUtils.pm:2082 +#: src/modules/YaST/caUtils.pm:2089 src/modules/YaST/caUtils.pm:2096 +#: src/modules/YaST/caUtils.pm:2103 src/modules/YaST/caUtils.pm:2110 +#: src/modules/YaST/caUtils.pm:2117 src/modules/YaST/caUtils.pm:2124 +#: src/modules/YaST/caUtils.pm:2130 src/modules/YaST/caUtils.pm:2137 +#: src/modules/YaST/caUtils.pm:2152 src/modules/YaST/caUtils.pm:2164 +#: src/modules/YaST/caUtils.pm:2182 src/modules/YaST/caUtils.pm:2187 +#: src/modules/YaST/caUtils.pm:2206 src/modules/YaST/caUtils.pm:2213 +#: src/modules/YaST/caUtils.pm:2220 src/modules/YaST/caUtils.pm:2227 +#: src/modules/YaST/caUtils.pm:2234 src/modules/YaST/caUtils.pm:2240 +#: src/modules/YaST/caUtils.pm:2246 src/modules/YaST/caUtils.pm:2252 +#: src/modules/YaST/caUtils.pm:2267 src/modules/YaST/caUtils.pm:2273 +#: src/modules/YaST/caUtils.pm:2279 #, perl-format msgid "Invalid value '%s' for parameter '%s'." msgstr "값 '%s'('%s' 매개변수에 대한)이(가) 잘못되었습니다." -#: src/modules/YaST/caUtils.pm:1918 +#: src/modules/YaST/caUtils.pm:1918 #, perl-format msgid "Password (%s) is too simple." msgstr "비밀번호(%s)가 너무 단순합니다." -#: src/modules/YaST/caUtils.pm:1965 src/modules/YaST/caUtils.pm:1986 -#: src/modules/YaST/caUtils.pm:1993 src/modules/YaST/caUtils.pm:2012 -#: src/modules/YaST/caUtils.pm:2034 src/modules/YaST/caUtils.pm:2052 -#: src/modules/YaST/caUtils.pm:2071 src/modules/YaST/caUtils.pm:2146 -#: src/modules/YaST/caUtils.pm:2160 src/modules/YaST/caUtils.pm:2171 -#: src/modules/YaST/caUtils.pm:2195 src/modules/YaST/caUtils.pm:2259 +#: src/modules/YaST/caUtils.pm:1965 src/modules/YaST/caUtils.pm:1986 +#: src/modules/YaST/caUtils.pm:1993 src/modules/YaST/caUtils.pm:2012 +#: src/modules/YaST/caUtils.pm:2034 src/modules/YaST/caUtils.pm:2052 +#: src/modules/YaST/caUtils.pm:2071 src/modules/YaST/caUtils.pm:2146 +#: src/modules/YaST/caUtils.pm:2160 src/modules/YaST/caUtils.pm:2171 +#: src/modules/YaST/caUtils.pm:2195 src/modules/YaST/caUtils.pm:2259 #, perl-format msgid "Wrong use of 'critical' in '%s'." msgstr "'%s'에서의 'critical' 사용이 잘못되었습니다." -#: src/modules/YaST/caUtils.pm:1974 +#: src/modules/YaST/caUtils.pm:1974 #, perl-format msgid "Unknown value '%s' in '%s'." msgstr "알 수 없는 값 '%s'이(가) '%s'에 있습니다." Modified: branches/SLE12-SP3/yast/ko/po/cio.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/cio.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/cio.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,86 +14,83 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Copyright (c) 2014 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/iochannel/channels_dialog.rb:125 +#. Copyright (c) 2014 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/iochannel/channels_dialog.rb:125 msgid "Available Input/Output Channels" msgstr "사용 가능한 입력/출력 채널" -#: src/lib/iochannel/channels_dialog.rb:132 +#: src/lib/iochannel/channels_dialog.rb:132 msgid "Device" msgstr "장치" -#: src/lib/iochannel/channels_dialog.rb:132 +#: src/lib/iochannel/channels_dialog.rb:132 msgid "Used" msgstr "사용량" -#: src/lib/iochannel/channels_dialog.rb:142 +#: src/lib/iochannel/channels_dialog.rb:142 msgid "no" msgstr "아니오" -#: src/lib/iochannel/channels_dialog.rb:142 +#: src/lib/iochannel/channels_dialog.rb:142 msgid "yes" msgstr "예" -#. filter can be empty if dialog is not yet created -#: src/lib/iochannel/channels_dialog.rb:160 +#. filter can be empty if dialog is not yet created +#: src/lib/iochannel/channels_dialog.rb:160 msgid "Filter channels" msgstr "필터 채널" -#: src/lib/iochannel/channels_dialog.rb:162 +#: src/lib/iochannel/channels_dialog.rb:162 msgid "&Select All" msgstr "모두 선택(&S)" -#: src/lib/iochannel/channels_dialog.rb:163 +#: src/lib/iochannel/channels_dialog.rb:163 msgid "&Clear selection" msgstr "선택된 부분 지우기(&C)" -#: src/lib/iochannel/channels_dialog.rb:164 +#: src/lib/iochannel/channels_dialog.rb:164 msgid "&Blacklist Selected Channels" msgstr "선택한 채널 블랙리스트 작성(&B)" -#: src/lib/iochannel/channels_dialog.rb:165 +#: src/lib/iochannel/channels_dialog.rb:165 msgid "&Unban Channels" msgstr "채널 차단 취소(&U)" -#: src/lib/iochannel/channels_dialog.rb:170 +#: src/lib/iochannel/channels_dialog.rb:170 msgid "&Exit" msgstr "종료(&E)" -#. TRANSLATORS: %s stands for the smallest snippet inside which we detect syntax error -#: src/lib/iochannel/unban_dialog.rb:80 +#. TRANSLATORS: %s stands for the smallest snippet inside which we detect syntax error +#: src/lib/iochannel/unban_dialog.rb:80 msgid "Specified range is invalid. Wrong value is inside snippet '%s'" -msgstr "" -"지정한 범위가 잘못되었습니다. '%s' 코드 조각 내에 잘못된 값이 있습니다." +msgstr "지정한 범위가 잘못되었습니다. '%s' 코드 조각 내에 잘못된 값이 있습니다." -#: src/lib/iochannel/unban_dialog.rb:101 +#: src/lib/iochannel/unban_dialog.rb:101 msgid "Unban Input/Output Channels" msgstr "입력/출력 채널 차단 취소" -#: src/lib/iochannel/unban_dialog.rb:106 +#: src/lib/iochannel/unban_dialog.rb:106 msgid "" "List of ranges of channels to unban separated by comma.\n" -"Range can be channel, part of channel which will be filled to zero or range " -"specified with dash.\n" +"Range can be channel, part of channel which will be filled to zero or range specified with dash.\n" "Example value: 0.0.0001, AA00, 0.1.0100-200" msgstr "" "차단을 취소할 채널 범위의 목록을 쉼표로 구분하십시오.\n" -"범위는 채널, 영(0)으로 채워질 채널의 일부 또는 대시(-)로 지정되는 범위일 수 " -"있습니다.\n" +"범위는 채널, 영(0)으로 채워질 채널의 일부 또는 대시(-)로 지정되는 범위일 수 있습니다.\n" "값 예: 0.0.0001, AA00, 0.1.0100-200" -#: src/lib/iochannel/unban_dialog.rb:110 +#: src/lib/iochannel/unban_dialog.rb:110 msgid "Ranges to Unban." msgstr "차단을 취소할 범위." Modified: branches/SLE12-SP3/yast/ko/po/cluster.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/cluster.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/cluster.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,189 +14,184 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xcluster module -#: src/clients/cluster.rb:54 +#. Command line help text for the Xcluster module +#: src/clients/cluster.rb:54 msgid "Configuration of cluster" msgstr "클러스터 구성" -#. Rich text title for Cluster in proposals -#: src/clients/cluster_proposal.rb:83 +#. Rich text title for Cluster in proposals +#: src/clients/cluster_proposal.rb:83 msgid "Cluster" msgstr "클러스터" -#. Menu title for Cluster in proposals -#: src/clients/cluster_proposal.rb:87 +#. Menu title for Cluster in proposals +#: src/clients/cluster_proposal.rb:87 msgid "&Cluster" msgstr "클러스터(&C)" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/cluster/wizards.ycp -#. Package: Configuration of cluster -#. Summary: Wizards definitions -#. Authors: Cong Meng -#. -#. $Id: wizards.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/cluster/common.rb:47 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/cluster/wizards.ycp +#. Package: Configuration of cluster +#. Summary: Wizards definitions +#. Authors: Cong Meng +#. +#. $Id: wizards.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/cluster/common.rb:47 msgid "Communication Channels" msgstr "통신 채널" -#: src/include/cluster/common.rb:48 +#: src/include/cluster/common.rb:48 msgid "Security" msgstr "보안" -#: src/include/cluster/common.rb:49 +#: src/include/cluster/common.rb:49 msgid "Service" msgstr "서비스" -#: src/include/cluster/common.rb:50 +#: src/include/cluster/common.rb:50 msgid "Configure Csync2" msgstr "Csync2 구성" -#: src/include/cluster/common.rb:51 +#: src/include/cluster/common.rb:51 msgid "Configure conntrackd" msgstr "conntrackd 구성" -#. return `cancel or a string -#: src/include/cluster/dialogs.rb:87 src/include/cluster/dialogs.rb:122 +#. return `cancel or a string +#: src/include/cluster/dialogs.rb:87 src/include/cluster/dialogs.rb:122 msgid "OK" msgstr "확인" -#: src/include/cluster/dialogs.rb:88 src/include/cluster/dialogs.rb:123 +#: src/include/cluster/dialogs.rb:88 src/include/cluster/dialogs.rb:123 msgid "Cancel" msgstr "취소" -#. BNC#871970, change member address struct -#: src/include/cluster/dialogs.rb:113 +#. BNC#871970, change member address struct +#: src/include/cluster/dialogs.rb:113 msgid "IP Address" msgstr "IP 주소" -#: src/include/cluster/dialogs.rb:115 +#: src/include/cluster/dialogs.rb:115 msgid "Redundant IP Address" msgstr "중복 IP 주소" -#: src/include/cluster/dialogs.rb:117 src/include/cluster/dialogs.rb:501 +#: src/include/cluster/dialogs.rb:117 src/include/cluster/dialogs.rb:501 msgid "Node ID" msgstr "노드 ID" -#. Set need to require 'set' -#: src/include/cluster/dialogs.rb:165 +#. Set need to require 'set' +#: src/include/cluster/dialogs.rb:165 msgid "Node ID has to be fulfilled with a positive integer" msgstr "노드 ID는 양의 정수로 이행되어야 합니다." -#: src/include/cluster/dialogs.rb:172 +#: src/include/cluster/dialogs.rb:172 msgid "Node ID must be unique" msgstr "노드 ID는 고유해야 합니다." -#. BNC#871970, change member address struct -#: src/include/cluster/dialogs.rb:193 src/include/cluster/dialogs.rb:247 +#. BNC#871970, change member address struct +#: src/include/cluster/dialogs.rb:193 src/include/cluster/dialogs.rb:247 msgid "The Bind Network Address has to be fulfilled" msgstr "바인드 네트워크 주소를 이행해야 합니다." -#: src/include/cluster/dialogs.rb:199 +#: src/include/cluster/dialogs.rb:199 msgid "The cluster name has to be fulfilled" msgstr "클러스터 이름을 이행해야 합니다." -#: src/include/cluster/dialogs.rb:216 +#: src/include/cluster/dialogs.rb:216 msgid "The Member Address has to be fulfilled" msgstr "구성원 주소를 이행해야 합니다." -#. BNC#880242, expected_votes must have value when "udp" -#: src/include/cluster/dialogs.rb:222 -msgid "" -"The Expected Votes has to be fulfilled when multicast transport is configured" +#. BNC#880242, expected_votes must have value when "udp" +#: src/include/cluster/dialogs.rb:222 +msgid "The Expected Votes has to be fulfilled when multicast transport is configured" msgstr "멀티캐스트 전송이 구성되었을 때 필요한 응답을 이행해야 합니다." -#: src/include/cluster/dialogs.rb:228 src/include/cluster/dialogs.rb:256 -#: src/include/cluster/dialogs.rb:1429 +#: src/include/cluster/dialogs.rb:228 src/include/cluster/dialogs.rb:256 +#: src/include/cluster/dialogs.rb:1429 msgid "The Multicast Address has to be fulfilled" msgstr "멀티캐스트 주소를 이행해야 합니다." -#: src/include/cluster/dialogs.rb:238 src/include/cluster/dialogs.rb:266 +#: src/include/cluster/dialogs.rb:238 src/include/cluster/dialogs.rb:266 msgid "The Multicast port must be a positive integer" msgstr "멀티캐스트 포트는 양의 정수여야 합니다." -#: src/include/cluster/dialogs.rb:272 -msgid "" -"Only passive or active can be chosen if multiple interface used. Set to " -"passive." -msgstr "" -"여러 인터페이스를 사용할 경우 수동 또는 능동만 선택할 수 있습니다. 수동으로 " -"설정되었습니다." +#: src/include/cluster/dialogs.rb:272 +msgid "Only passive or active can be chosen if multiple interface used. Set to passive." +msgstr "여러 인터페이스를 사용할 경우 수동 또는 능동만 선택할 수 있습니다. 수동으로 설정되었습니다." -#. BNC#871970, change member address struct to memberaddr -#: src/include/cluster/dialogs.rb:441 +#. BNC#871970, change member address struct to memberaddr +#: src/include/cluster/dialogs.rb:441 msgid "Transport:" msgstr "전송:" -#: src/include/cluster/dialogs.rb:449 +#: src/include/cluster/dialogs.rb:449 msgid "Channel" msgstr "채널" -#: src/include/cluster/dialogs.rb:454 src/include/cluster/dialogs.rb:475 +#: src/include/cluster/dialogs.rb:454 src/include/cluster/dialogs.rb:475 msgid "Bind Network Address:" msgstr "바인드 네트워크 주소:" -#: src/include/cluster/dialogs.rb:460 src/include/cluster/dialogs.rb:478 -#: src/include/cluster/dialogs.rb:1365 +#: src/include/cluster/dialogs.rb:460 src/include/cluster/dialogs.rb:478 +#: src/include/cluster/dialogs.rb:1365 msgid "Multicast Address:" msgstr "멀티캐스트 주소:" -#: src/include/cluster/dialogs.rb:462 src/include/cluster/dialogs.rb:479 +#: src/include/cluster/dialogs.rb:462 src/include/cluster/dialogs.rb:479 msgid "Multicast Port:" msgstr "멀티캐스트 포트:" -#: src/include/cluster/dialogs.rb:469 +#: src/include/cluster/dialogs.rb:469 msgid "Redundant Channel" msgstr "중복 채널" -#: src/include/cluster/dialogs.rb:485 +#: src/include/cluster/dialogs.rb:485 msgid "Cluster Name:" msgstr "클러스터 이름:" -#: src/include/cluster/dialogs.rb:486 +#: src/include/cluster/dialogs.rb:486 msgid "Expected Votes:" msgstr "필요한 응답:" -#: src/include/cluster/dialogs.rb:490 +#: src/include/cluster/dialogs.rb:490 msgid "rrp mode:" msgstr "rrp 모드:" -#: src/include/cluster/dialogs.rb:495 +#: src/include/cluster/dialogs.rb:495 msgid "Auto Generate Node ID" msgstr "노드 ID 자동 생성" -#: src/include/cluster/dialogs.rb:500 +#: src/include/cluster/dialogs.rb:500 msgid "Member Address:" msgstr "구성원 주소:" -#: src/include/cluster/dialogs.rb:501 +#: src/include/cluster/dialogs.rb:501 msgid "IP" msgstr "IP" -#: src/include/cluster/dialogs.rb:501 +#: src/include/cluster/dialogs.rb:501 msgid "Redundant IP" msgstr "중복 IP" -#. BNC#879596, check the corosync.conf format -#: src/include/cluster/dialogs.rb:541 +#. BNC#879596, check the corosync.conf format +#: src/include/cluster/dialogs.rb:541 msgid "" " NOTICE: Detected old corosync configuration.\n" " Please reconfigure the member list and confirm all other settings." @@ -204,132 +199,124 @@ " 참고: 이전 corosync 구성이 감지되었습니다.\n" " 구성원 목록을 다시 구성하고 다른 모든 설정을 확인하십시오." -#. Notice, current could be "nil" if the list is empty. -#: src/include/cluster/dialogs.rb:717 +#. Notice, current could be "nil" if the list is empty. +#: src/include/cluster/dialogs.rb:717 msgid "Enable Security Auth" msgstr "보안 인증 활성화" -#: src/include/cluster/dialogs.rb:721 -msgid "" -"For a newly created cluster, push the button below to generate /etc/corosync/" -"authkey." -msgstr "" -"새로 생성된 클러스터의 경우 아래 버튼을 눌러 /etc/corosync/authkey를 생성하십" -"시오." +#: src/include/cluster/dialogs.rb:721 +msgid "For a newly created cluster, push the button below to generate /etc/corosync/authkey." +msgstr "새로 생성된 클러스터의 경우 아래 버튼을 눌러 /etc/corosync/authkey를 생성하십시오." -#: src/include/cluster/dialogs.rb:726 -msgid "" -"To join an existing cluster, please copy /etc/corosync/authkey from other " -"nodes manually." -msgstr "" -"기존 클러스터에 가입하려면 다른 노드에서 /etc/corosync/authkey를 수동으로 복" -"사하십시오." +#: src/include/cluster/dialogs.rb:726 +msgid "To join an existing cluster, please copy /etc/corosync/authkey from other nodes manually." +msgstr "기존 클러스터에 가입하려면 다른 노드에서 /etc/corosync/authkey를 수동으로 복사하십시오." -#: src/include/cluster/dialogs.rb:752 +#: src/include/cluster/dialogs.rb:752 msgid "Failed to create /etc/corosync/authkey" msgstr "/etc/corosync/authkey 생성 실패" -#: src/include/cluster/dialogs.rb:754 +#: src/include/cluster/dialogs.rb:754 msgid "Create /etc/corosync/authkey succeeded" msgstr "/etc/corosync/authkey 생성 성공" -#: src/include/cluster/dialogs.rb:815 src/include/cluster/dialogs.rb:885 +#: src/include/cluster/dialogs.rb:815 src/include/cluster/dialogs.rb:885 msgid "Running" msgstr "실행 중" -#: src/include/cluster/dialogs.rb:817 +#: src/include/cluster/dialogs.rb:817 msgid "Not running" msgstr "실행 중이 아님" -#. servie:cluster is the name of /etc/sysconfig/SuSEfirewall2.d/services/cluster -#: src/include/cluster/dialogs.rb:853 +#. servie:cluster is the name of /etc/sysconfig/SuSEfirewall2.d/services/cluster +#: src/include/cluster/dialogs.rb:853 msgid "Booting" msgstr "부팅 중" -#: src/include/cluster/dialogs.rb:863 +#: src/include/cluster/dialogs.rb:863 msgid "On -- Start pacemaker during boot" msgstr "켜기 -- 부팅 시 pacemaker 시작" -#: src/include/cluster/dialogs.rb:870 +#: src/include/cluster/dialogs.rb:870 msgid "Off -- Start pacemaker manually" msgstr "끄기 -- 수동으로 pacemaker 시작" -#: src/include/cluster/dialogs.rb:879 +#: src/include/cluster/dialogs.rb:879 msgid "Switch On and Off" msgstr "설정/해제" -#: src/include/cluster/dialogs.rb:884 +#: src/include/cluster/dialogs.rb:884 msgid "Current Status: " msgstr "현재 상태: " -#: src/include/cluster/dialogs.rb:893 +#: src/include/cluster/dialogs.rb:893 msgid "Start pacemaker Now" msgstr "지금 pacemaker 시작" -#: src/include/cluster/dialogs.rb:894 +#: src/include/cluster/dialogs.rb:894 msgid "Stop pacemaker Now" msgstr "지금 pacemaker 중지" -#. BNC#874563,stop pacemaker could stop corosync since BNC#872651 is fixed -#: src/include/cluster/dialogs.rb:992 +#. BNC#874563,stop pacemaker could stop corosync since BNC#872651 is fixed +#: src/include/cluster/dialogs.rb:992 msgid "Sync Host" msgstr "호스트 동기화" -#: src/include/cluster/dialogs.rb:996 src/include/cluster/dialogs.rb:1008 +#: src/include/cluster/dialogs.rb:996 src/include/cluster/dialogs.rb:1008 msgid "Add" msgstr "추가" -#: src/include/cluster/dialogs.rb:997 src/include/cluster/dialogs.rb:1009 +#: src/include/cluster/dialogs.rb:997 src/include/cluster/dialogs.rb:1009 msgid "Del" msgstr "Del" -#: src/include/cluster/dialogs.rb:998 src/include/cluster/dialogs.rb:1010 +#: src/include/cluster/dialogs.rb:998 src/include/cluster/dialogs.rb:1010 msgid "Edit" msgstr "편집" -#: src/include/cluster/dialogs.rb:1004 +#: src/include/cluster/dialogs.rb:1004 msgid "Sync File" msgstr "파일 동기화" -#: src/include/cluster/dialogs.rb:1011 +#: src/include/cluster/dialogs.rb:1011 msgid "Add Suggested Files" msgstr "제안된 파일 추가" -#: src/include/cluster/dialogs.rb:1020 +#: src/include/cluster/dialogs.rb:1020 msgid "Generate Pre-Shared-Keys" msgstr "Pre-Shared-Keys 생성" -#. remove duplicated elements -#: src/include/cluster/dialogs.rb:1145 +#. remove duplicated elements +#: src/include/cluster/dialogs.rb:1145 msgid "Csync2 Status Unknown" msgstr "Csync2 상태 알 수 없음" -#: src/include/cluster/dialogs.rb:1148 +#: src/include/cluster/dialogs.rb:1148 msgid "Turn csync2 ON" msgstr "csync2 켜기" -#: src/include/cluster/dialogs.rb:1151 +#: src/include/cluster/dialogs.rb:1151 msgid "Turn csync2 OFF" msgstr "csync2 끄기" -#: src/include/cluster/dialogs.rb:1181 +#: src/include/cluster/dialogs.rb:1181 msgid "Enter a hostname" msgstr "호스트 이름 입력" -#: src/include/cluster/dialogs.rb:1195 +#: src/include/cluster/dialogs.rb:1195 msgid "Edit the hostname" msgstr "호스트 이름 편집" -#: src/include/cluster/dialogs.rb:1209 +#: src/include/cluster/dialogs.rb:1209 msgid "Enter a filename to synchronize" msgstr "동기화할 파일 이름 입력" -#: src/include/cluster/dialogs.rb:1224 +#: src/include/cluster/dialogs.rb:1224 msgid "Edit the filename" msgstr "파일 이름 편집" -#. key file exist -#: src/include/cluster/dialogs.rb:1256 +#. key file exist +#: src/include/cluster/dialogs.rb:1256 msgid "" "Key file %1 already exist.\n" "Do you want to overwrite it?" @@ -337,13 +324,13 @@ "키 파일 %1이(가) 이미 존재합니다.\n" "덮어쓰시겠습니까?" -#. remove exist key file -#: src/include/cluster/dialogs.rb:1266 +#. remove exist key file +#: src/include/cluster/dialogs.rb:1266 msgid "Delete key file %1 failed." msgstr "키 파일 %1 삭제에 실패했습니다." -#. generate key file -#: src/include/cluster/dialogs.rb:1280 +#. generate key file +#: src/include/cluster/dialogs.rb:1280 msgid "" "Key file %1 is generated.\n" "Clicking \"Add Suggested Files\" button adds it to sync list." @@ -351,235 +338,114 @@ "키 파일 %1이(가) 생성되었습니다.\n" "\"제안된 파일 추가\" 버튼을 클릭하면 동기화 목록에 추가됩니다." -#: src/include/cluster/dialogs.rb:1287 +#: src/include/cluster/dialogs.rb:1287 msgid "Key generation failed." msgstr "키 생성에 실패했습니다." -#. SaveCsync2(); -#: src/include/cluster/dialogs.rb:1349 +#. SaveCsync2(); +#: src/include/cluster/dialogs.rb:1349 msgid "" -"Conntrackd is a daemon which helps to duplicate firewall status between " -"cluster nodes.\n" +"Conntrackd is a daemon which helps to duplicate firewall status between cluster nodes.\n" "YaST can help to configure some basic aspects of conntrackd.\n" "You need to start it with the ocf:heartbeat:conntrackd." msgstr "" -"Conntrackd는 클러스터 노드 간에 방화벽 상태를 복제하는 데 유용한 데몬입니" -"다.\n" +"Conntrackd는 클러스터 노드 간에 방화벽 상태를 복제하는 데 유용한 데몬입니다.\n" "YaST는 conntrackd의 일부 기본 측면을 구성하는 데 유용할 수 있습니다.\n" "ocf:heartbeat:conntrackd로 시작해야 합니다." -#: src/include/cluster/dialogs.rb:1360 +#: src/include/cluster/dialogs.rb:1360 msgid "Dedicated Interface:" msgstr "전용 인터페이스:" -#: src/include/cluster/dialogs.rb:1363 +#: src/include/cluster/dialogs.rb:1363 msgid "IP:" msgstr "IP:" -#: src/include/cluster/dialogs.rb:1366 +#: src/include/cluster/dialogs.rb:1366 msgid "Group Number:" msgstr "그룹 번호:" -#: src/include/cluster/dialogs.rb:1370 +#: src/include/cluster/dialogs.rb:1370 msgid "Generate /etc/conntrackd/conntrackd.conf" msgstr "/etc/conntrackd/conntrackd.conf 생성" -#: src/include/cluster/dialogs.rb:1437 +#: src/include/cluster/dialogs.rb:1437 msgid "The Group Number must be a positive integer" msgstr "그룹 번호는 양의 정수여야 합니다." -#. All helps are here -#: src/include/cluster/helps.rb:35 +#. All helps are here +#: src/include/cluster/helps.rb:35 msgid "" -"<p><b><big>Bind Network Address</big></b><br>This specifies the address " -"which the openais executive should bind. This address should always end in " -"zero. If the totem traffic should be routed over 192.168.5.92, set " -"bindnetaddr to 192.168.5.0.<br>This may also be an IPV6 address, in which " -"case IPV6 networking will be used. In this case, the full address must be " -"specified and there is no automatic selection of the network interface " -"within a specific subnet as with IPv4. If IPv6 networking is used, the " -"nodeid field must be specified.<br></p>\n" -"<p><b><big>Multicast Address</big></b><br>This is the multicast address used " -"by openais executive. The default should work for most networks, but " -"the network administrator should be queried about a multicast address " -"to use. Avoid 224.x.x.x because this is a \"config\" multicast address." -"<br>This may also be an IPV6 multicast address, in which case IPV6 " -"networking will be used. If IPv6 networking is used, the nodeid field must " -"be specified.</p>\n" -"<p><b><big>Port</big></b><br>This specifies the UDP port number. It is " -"possible to use the same multicast address on a network with the openais " -"services configured for different UDP ports.<br></p>\n" -"<p><b><big>Member Address</big></b><br>This list specifies all the nodes in " -"the cluster by IP address. This could be configurable when using udpu" -"(Unicast). <br></p>\n" -"<p><b><big>Node ID</big></b><br>This configuration option is optional " -"when using IPv4 and required when using IPv6. This is a 32 bit value " -"specifying the node identifier delivered to the cluster membership service. " -"If this is not specified with IPv4, the node id will be determined from " -"the 32 bit IP address the system to which the system is bound with ring " -"identifier of 0. The node identifier value of zero is reserved and should " -"not be used.<br></p>\n" -"<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, " -"which may be none, active, or passive. Active replication offers " -"slightly lower latency from transmit to delivery in faulty network " -"environments but with less performance. Passive replication may nearly " -"double the speed of the totem protocol if the protocol doesn't become " -"cpu bound. The final option is none, in which case only one network " -"interface will be used to operate the totem protocol. If only one " -"interface directive is specified, none is automatically chosen. If multiple " -"interface directives are specified, only active or passive may be chosen." -"<br></p>\n" -"<p><b><big>Expected votes</big></b><br>Expect vote number for voting " -"quorum. Will be automatically calculated when the nodelist {} section is " -"present in corosync.conf (the list will be generated when using unicast " -"transport) or can be specified in the quorum {} section (Expect votes should " -"use the total node numble of the cluster). If Expected votes presents in " -"unicast transport, the value will override the one automatically calculated." -"<br></p>\n" -"<p><b><big>Auto Generate Node ID</big></b><br>Nodeid is required when using " -"IPv6. Auto node ID enabled will generate nodeid automatically.<br></p>\n" +"<p><b><big>Bind Network Address</big></b><br>This specifies the address which the openais executive should bind. This address should always end in zero. If the totem traffic should be routed over 192.168.5.92, set bindnetaddr to 192.168.5.0.<br>This may also be an IPV6 address, in which case IPV6 networking will be used. In this case, the full address must be specified and there is no automatic selection of the network interface within a specific subnet as with IPv4. If IPv6 networking is used, the nodeid field must be specified.<br></p>\n" +"<p><b><big>Multicast Address</big></b><br>This is the multicast address used by openais executive. The default should work for most networks, but the network administrator should be queried about a multicast address to use. Avoid 224.x.x.x because this is a \"config\" multicast address.<br>This may also be an IPV6 multicast address, in which case IPV6 networking will be used. If IPv6 networking is used, the nodeid field must be specified.</p>\n" +"<p><b><big>Port</big></b><br>This specifies the UDP port number. It is possible to use the same multicast address on a network with the openais services configured for different UDP ports.<br></p>\n" +"<p><b><big>Member Address</big></b><br>This list specifies all the nodes in the cluster by IP address. This could be configurable when using udpu(Unicast). <br></p>\n" +"<p><b><big>Node ID</big></b><br>This configuration option is optional when using IPv4 and required when using IPv6. This is a 32 bit value specifying the node identifier delivered to the cluster membership service. If this is not specified with IPv4, the node id will be determined from the 32 bit IP address the system to which the system is bound with ring identifier of 0. The node identifier value of zero is reserved and should not be used.<br></p>\n" +"<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, which may be none, active, or passive. Active replication offers slightly lower latency from transmit to delivery in faulty network environments but with less performance. Passive replication may nearly double the speed of the totem protocol if the protocol doesn't become cpu bound. The final option is none, in which case only one network interface will be used to operate the totem protocol. If only one interface directive is specified, none is automatically chosen. If multiple interface directives are specified, only active or passive may be chosen.<br></p>\n" +"<p><b><big>Expected votes</big></b><br>Expect vote number for voting quorum. Will be automatically calculated when the nodelist {} section is present in corosync.conf (the list will be generated when using unicast transport) or can be specified in the quorum {} section (Expect votes should use the total node numble of the cluster). If Expected votes presents in unicast transport, the value will override the one automatically calculated.<br></p>\n" +"<p><b><big>Auto Generate Node ID</big></b><br>Nodeid is required when using IPv6. Auto node ID enabled will generate nodeid automatically.<br></p>\n" msgstr "" -"<p><b><big>바인드 네트워크 주소</big></b><br>openais executive가 바인드해야 " -"하는 주소를 지정합니다. 이 주소는 항상 0으로 끝나야 합니다. Totem 트래픽" -"이 192.168.5.92를 통해 라우팅되어야 하는 경우, bindnetaddr을 192.168.5.0으로 " -"설정하십시오.<br>이것은 IPV6 주소일 수도 있으며, 이 경우 IPV6 네트워킹이 사" -"용됩니다. 이 경우 전체 주소를 지정해야 하며, 특정 서브넷의 네트워크 인터페이" -"스를 IPv4로 자동 선택하지 않습니다. IPv6 네트워킹이 사용되는 경우 nodeid 필드" -"를 지정해야 합니다.<br></p>\n" -"<p><b><big>멀티캐스트 주소</big></b><br>openais executive에서 사용되는 멀티캐" -"스트 주소입니다. 대부분의 네트워크에서는 기본값을 사용하면 되지만, 사용할 멀" -"티캐스트 주소는 네트워크 관리자에게 문의해야 합니다. 224.x.x.x는 \"config\" " -"멀티캐스트 주소이므로 사용하지 마십시오.<br>이것은 IPV6 멀티캐스트 주소일 수 " -"있으며, 이 경우 IPV6 네트워킹이 사용됩니다. IPv6 네트워킹이 사용되는 경우 " -"nodeid 필드를 지정해야 합니다.</p>\n" -"<p><b><big>포트</big></b><br>UDP 포트 번호를 지정합니다. 다른 UDP 포트에 대" -"해 openais 서비스가 구성된 네트워크에서 동일한 멀티캐스트 주소를 사용할 수 있" -"습니다.<br></p>\n" -"<p><b><big>구성원 주소</big></b><br>이 목록은 클러스터의 모든 노드를 IP 주소" -"로 지정합니다. udpu를 사용할 때 구성할 수 있습니다(유니캐스트).<br></p>\n" -"<p><b><big>노드 ID</big></b><br>이 구성 옵션은 IPv4를 사용하는 경우 선택 사항" -"이고 IPv6을 사용하는 경우 필수입니다. 클러스터 멤버쉽 서비스에 제공되는 노드 " -"식별자를 지정하는 32비트 값입니다. IPv4로 지정되지 않은 경우 시스템이 링 식별" -"자 0으로 바인딩된 시스템의 32비트 IP 주소에서 노드 ID가 결정됩니다. 노드 식별" -"자 값 0은 예약되어 있으며 사용하면 안 됩니다.<br></p>\n" -"<p><b><big>rrp_mode</big></b><br>모드 또는 중복 링을 지정하며 none, active 또" -"는 passive일 수 있습니다. 활성 복제는 결함이 있는 네트워크 환경에서 전송부터 " -"배달까지의 대기 시간이 좀 더 짧지만 성능이 저하됩니다. 수동 복제는 프로토콜" -"이 cpu로 구속되지 않는 경우 totem 프로토콜 속도의 거의 두 배일 수 있습니다. " -"최종 옵션은 none으로, 이 경우 하나의 네트워크 인터페이스만 totem 프로토콜을 " -"작동하는 데 사용됩니다. 하나의 인터페이스 지시문만 지정하면 자동으로 none이 " -"선택됩니다. 여러 인터페이스 지시문이 지정된 경우 active 또는 passive만 선택" -"할 수 있습니다.<br></p>\n" -"<p><b><big>필요한 응답</big></b><br>쿼럼 투표에 필요한 응답 수입니다. " -"nodelist {} 섹션이 corosync.conf에 있으면 자동으로 계산되며(유니캐스트 전송 " -"사용 시 목록 생성) quorum {} 섹션에서 지정할 수 있습니다(필요한 응답 수는 클" -"러스터의 총 노드 수를 사용해야 함). 필요한 응답 수가 유니캐스트 전송에 있는 " -"경우 이 값이 자동으로 계산된 값을 대체합니다.<br></p>\n" -"<p><b><big>노드 ID 자동 생성</big></b><br>IPv6를 사용할 경우 Nodeid가 필요합" -"니다. 자동 노드 ID를 활성화하면 nodeid가 자동으로 생성됩니다.<br></p>\n" +"<p><b><big>바인드 네트워크 주소</big></b><br>openais executive가 바인드해야 하는 주소를 지정합니다. 이 주소는 항상 0으로 끝나야 합니다. Totem 트래픽이 192.168.5.92를 통해 라우팅되어야 하는 경우, bindnetaddr을 192.168.5.0으로 설정하십시오.<br>이것은 IPV6 주소일 수도 있으며, 이 경우 IPV6 네트워킹이 사용됩니다. 이 경우 전체 주소를 지정해야 하며, 특정 서브넷의 네트워크 인터페이스를 IPv4로 자동 선택하지 않습니다. IPv6 네트워킹이 사용되는 경우 nodeid 필드를 지정해야 합니다.<br></p>\n" +"<p><b><big>멀티캐스트 주소</big></b><br>openais executive에서 사용되는 멀티캐스트 주소입니다. 대부분의 네트워크에서는 기본값을 사용하면 되지만, 사용할 멀티캐스트 주소는 네트워크 관리자에게 문의해야 합니다. 224.x.x.x는 \"config\" 멀티캐스트 주소이므로 사용하지 마십시오.<br>이것은 IPV6 멀티캐스트 주소일 수 있으며, 이 경우 IPV6 네트워킹이 사용됩니다. IPv6 네트워킹이 사용되는 경우 nodeid 필드를 지정해야 합니다.</p>\n" +"<p><b><big>포트</big></b><br>UDP 포트 번호를 지정합니다. 다른 UDP 포트에 대해 openais 서비스가 구성된 네트워크에서 동일한 멀티캐스트 주소를 사용할 수 있습니다.<br></p>\n" +"<p><b><big>구성원 주소</big></b><br>이 목록은 클러스터의 모든 노드를 IP 주소로 지정합니다. udpu를 사용할 때 구성할 수 있습니다(유니캐스트).<br></p>\n" +"<p><b><big>노드 ID</big></b><br>이 구성 옵션은 IPv4를 사용하는 경우 선택 사항이고 IPv6을 사용하는 경우 필수입니다. 클러스터 멤버쉽 서비스에 제공되는 노드 식별자를 지정하는 32비트 값입니다. IPv4로 지정되지 않은 경우 시스템이 링 식별자 0으로 바인딩된 시스템의 32비트 IP 주소에서 노드 ID가 결정됩니다. 노드 식별자 값 0은 예약되어 있으며 사용하면 안 됩니다.<br></p>\n" +"<p><b><big>rrp_mode</big></b><br>모드 또는 중복 링을 지정하며 none, active 또는 passive일 수 있습니다. 활성 복제는 결함이 있는 네트워크 환경에서 전송부터 배달까지의 대기 시간이 좀 더 짧지만 성능이 저하됩니다. 수동 복제는 프로토콜이 cpu로 구속되지 않는 경우 totem 프로토콜 속도의 거의 두 배일 수 있습니다. 최종 옵션은 none으로, 이 경우 하나의 네트워크 인터페이스만 totem 프로토콜을 작동하는 데 사용됩니다. 하나의 인터페이스 지시문만 지정하면 자동으로 none이 선택됩니다. 여러 인터페이스 지시문이 지정된 경우 active 또는 passive만 선택할 수 있습니다.<br></p>\n" +"<p><b><big>필요한 응답</big></b><br>쿼럼 투표에 필요한 응답 수입니다. nodelist {} 섹션이 corosync.conf에 있으면 자동으로 계산되며(유니캐스트 전송 사용 시 목록 생성) quorum {} 섹션에서 지정할 수 있습니다(필요한 응답 수는 클러스터의 총 노드 수를 사용해야 함). 필요한 응답 수가 유니캐스트 전송에 있는 경우 이 값이 자동으로 계산된 값을 대체합니다.<br></p>\n" +"<p><b><big>노드 ID 자동 생성</big></b><br>IPv6를 사용할 경우 Nodeid가 필요합니다. 자동 노드 ID를 활성화하면 nodeid가 자동으로 생성됩니다.<br></p>\n" -#: src/include/cluster/helps.rb:45 +#: src/include/cluster/helps.rb:45 msgid "" "\n" -"<p><b><big>Enable Security Auth</big></b><br>This specifies that HMAC/SHA1 " -"authentication should be used to authenticate all messages. It further " -"specifies that all data should be encrypted with the sober128 " -"encryption algorithm to protect data from eavesdropping. Enabling this " -"option adds a 36 byte header to every message sent by totem which reduces " -"total throughput. Encryption and authentication consume 75% of CPU cycles " -"in aisexec as measured with gprof when enabled. For 100Mbit networks " -"with 1500 MTU frame transmissions: A throughput of 9Mb/s is possible " -"with 100% cpu utilization when this option is enabled on 3GHz cpus. A " -"throughput of 10Mb/s is possible wth 20% cpu utilization when this option " -"is disabled on 3GHz cpus. For gig-e networks with large frame " -"transmissions: A throughput of 20Mb/s is possible when this option is " -"enabled on 3GHz cpus. A throughput of 60Mb/s is possible when this " -"option is disabled on 3GHz cpus. The default is on. <br></p>\n" +"<p><b><big>Enable Security Auth</big></b><br>This specifies that HMAC/SHA1 authentication should be used to authenticate all messages. It further specifies that all data should be encrypted with the sober128 encryption algorithm to protect data from eavesdropping. Enabling this option adds a 36 byte header to every message sent by totem which reduces total throughput. Encryption and authentication consume 75% of CPU cycles in aisexec as measured with gprof when enabled. For 100Mbit networks with 1500 MTU frame transmissions: A throughput of 9Mb/s is possible with 100% cpu utilization when this option is enabled on 3GHz cpus. A throughput of 10Mb/s is possible wth 20% cpu utilization when this option is disabled on 3GHz cpus. For gig-e networks with large frame transmissions: A throughput of 20Mb/s is possible when this option is enabled on 3GHz cpus. A throughput of 60Mb/s is possible when this option is disabled on 3GHz cpus. The default is on. <b r></p>\n" msgstr "" "\n" -"<p><b><big>보안 인증 활성화</big></b><br>HMAC/SHA1 인증을 사용하여 모든 메시" -"지를 인증하도록 지정합니다. 또한 sober128 암호화 알고리즘으로 모든 데이터를 " -"암호화하여 도청으로부터 데이터를 보호하도록 지정합니다. 이 옵션을 활성화하면 " -"totem에 의해 전송된 모든 메시지에 36바이트 헤더가 추가되어 총 처리량이 감소합" -"니다. 활성화된 경우 gprof로 측정 시 암호화 및 인증은 aisexec의 CPU 주기 중 " -"75%를 이용합니다. 1500 MTU 프레임 전송이 있는 100mbit 네트워크의 경우: 3ghz " -"cpus에서 이 옵션이 활성화된 경우 100% cpu 활용 시 9mb/초 처리량이 가능합니" -"다. 3ghz cpus에서 이 옵션이 비활성화된 경우 20% cpu 활용 시 10mb/초 처리량이 " -"가능합니다. 큰 프레임 전송이 있는 gig-e 네트워크의 경우: 3ghz cpus에서 이 옵" -"션이 활성화된 경우 20mb/초 처리량이 가능합니다. 3ghz cpus에서 이 옵션이 비활" -"성화된 경우 60mb/초 처리량이 가능합니다. 기본값은 on입니다. <br></p>\n" +"<p><b><big>보안 인증 활성화</big></b><br>HMAC/SHA1 인증을 사용하여 모든 메시지를 인증하도록 지정합니다. 또한 sober128 암호화 알고리즘으로 모든 데이터를 암호화하여 도청으로부터 데이터를 보호하도록 지정합니다. 이 옵션을 활성화하면 totem에 의해 전송된 모든 메시지에 36바이트 헤더가 추가되어 총 처리량이 감소합니다. 활성화된 경우 gprof로 측정 시 암호화 및 인증은 aisexec의 CPU 주기 중 75%를 이용합니다. 1500 MTU 프레임 전송이 있는 100mbit 네트워크의 경우: 3ghz cpus에서 이 옵션이 활성화된 경우 100% cpu 활용 시 9mb/초 처리량이 가능합니다. 3ghz cpus에서 이 옵션이 비활성화된 경우 20% cpu 활용 시 10mb/초 처리량이 가능합니다. 큰 프레임 전송이 있는 gig-e 네트워크의 경우: 3ghz cpus에서 이 옵션이 활성화된 경우 20mb/초 처리량이 가능합니다. 3ghz cpus에서 이 옵션이 비활성화된 경우 60mb/초 처리량이 가능합니다. 기본값은 on입니다. <br></p>\n" -#: src/include/cluster/helps.rb:49 +#: src/include/cluster/helps.rb:49 msgid "" "\n" -"\t\t\t<p><b><big>Booting</big></b><br>Starting corosync service during boot " -"or not</p>\n" -"\t\t\t<p><b><big>Firewall Settings</big></b><br>Enable the port when " -"Firewall is enabled</p>\n" +"\t\t\t<p><b><big>Booting</big></b><br>Starting corosync service during boot or not</p>\n" +"\t\t\t<p><b><big>Firewall Settings</big></b><br>Enable the port when Firewall is enabled</p>\n" "\t\t\t" msgstr "" "\n" -"\t\t\t<p><b><big>부팅</big></b><br>부팅 중에 corosync 서비스를 시작하거나 시" -"작하지 않습니다.</p>\n" -"\t\t\t<p><b><big>방화벽 설정</big></b><br>방화벽이 활성화된 경우 포트를 활성" -"화합니다.</p>\n" +"\t\t\t<p><b><big>부팅</big></b><br>부팅 중에 corosync 서비스를 시작하거나 시작하지 않습니다.</p>\n" +"\t\t\t<p><b><big>방화벽 설정</big></b><br>방화벽이 활성화된 경우 포트를 활성화합니다.</p>\n" "\t\t\t" -#: src/include/cluster/helps.rb:55 +#: src/include/cluster/helps.rb:55 msgid "" "\n" -"\t\t<p><b><big>Sync Host</big></b><br>The hostnames used here must be the " -"local hostnames of the cluster nodes. That means you must use exactly the " -"same string as printed out by the hostname command.</p>\n" -"\t\t<p><b><big>Sync File</big></b><br>The full absolute filename to be " -"synced.</p>\n" -"\t\t<p><b><big>Pre-Shared-Keys</big></b><br>Authentication is performed " -"using the IP addresses and pre-shared-keys in Csync2. The key file is " -"generated with csync2 -k /etc/csync2/key_hagroup. The file key_hagroup " -"should be copied to all members of the cluster manually after it's created.\n" +"\t\t<p><b><big>Sync Host</big></b><br>The hostnames used here must be the local hostnames of the cluster nodes. That means you must use exactly the same string as printed out by the hostname command.</p>\n" +"\t\t<p><b><big>Sync File</big></b><br>The full absolute filename to be synced.</p>\n" +"\t\t<p><b><big>Pre-Shared-Keys</big></b><br>Authentication is performed using the IP addresses and pre-shared-keys in Csync2. The key file is generated with csync2 -k /etc/csync2/key_hagroup. The file key_hagroup should be copied to all members of the cluster manually after it's created.</p>\n" "\t" msgstr "" "\n" -"\t\t<p><b><big>호스트 동기화</big></b><br>여기에 사용된 호스트 이름은 클러스" -"터 노드의 로컬 호스트 이름이어야 합니다. 즉, hostname 명령을 통해 출력되는 문" -"자열을 사용해야 합니다.</p>\n" -"\t\t<p><b><big>파일 동기화</big></b><br>동기화할 전체 절대 파일 이름입니다.\n" -"\t\t<p><b><big>Pre-Shared-Keys</big></b><br>Csync2의 IP 주소 및 pre-shared-" -"keys를 사용하여 인증이 수행됩니다. 키 파일은 csync2 -k /etc/csync2/" -"key_hagroup을 사용하여 생성됩니다. key_hagroup 파일을 생성한 후 클러스터의 모" -"든 구성원에게 수동으로 복사해야 합니다.</p>\n" +"\t\t<p><b><big>호스트 동기화</big></b><br>여기에 사용된 호스트 이름은 클러스터 노드의 로컬 호스트 이름이어야 합니다. 즉, hostname 명령을 통해 출력되는 문자열을 사용해야 합니다.</p>\n" +"\t\t<p><b><big>파일 동기화</big></b><br>동기화할 전체 절대 파일 이름입니다.</p>\n" +"\t\t<p><b><big>Pre-Shared-Keys</big></b><br>Csync2의 IP 주소 및 pre-shared-keys를 사용하여 인증이 수행됩니다. 키 파일은 csync2 -k /etc/csync2/key_hagroup을 사용하여 생성됩니다. key_hagroup 파일을 생성한 후 클러스터의 모든 구성원에게 수동으로 복사해야 합니다.</p>\n" "\t" -#: src/include/cluster/helps.rb:62 +#: src/include/cluster/helps.rb:62 msgid "" "\n" -"\t\t<p><b><big>Dedicated Interface</big></b><br>A dedicated network " -"interface for syncing. The interface must support multicast, and is UP for " -"using. You may have to have it pre-configured. </p>\n" -"\t\t<p><b><big>IP</big></b><br>The IPv4 address assigned to the dedicated " -"network interface. This is detected automatically.</p>\n" -"\t\t<p><b><big>Multicast Address</big></b><br>The multicast address to be " -"used for syncing.</p>\n" -"\t\t<p><b><big>Group Number</big></b><br>A numeric ID indicate the group for " -"syncing.</p>\n" +"\t\t<p><b><big>Dedicated Interface</big></b><br>A dedicated network interface for syncing. The interface must support multicast, and is UP for using. You may have to have it pre-configured. </p>\n" +"\t\t<p><b><big>IP</big></b><br>The IPv4 address assigned to the dedicated network interface. This is detected automatically.</p>\n" +"\t\t<p><b><big>Multicast Address</big></b><br>The multicast address to be used for syncing.</p>\n" +"\t\t<p><b><big>Group Number</big></b><br>A numeric ID indicate the group for syncing.</p>\n" "\t" msgstr "" "\n" -"\t\t<p><b><big>전용 인터페이스</big></b><br>동기화에 사용되는 전용 네트워크 " -"인터페이스입니다. 인터페이스는 멀티캐스트를 지원해야 하며 사용을 위해 UP 상태" -"여야 합니다. 미리 구성되도록 해야 할 수도 있습니다. </p>\n" -"\t\t<p><b><big>IP</big></b><br>전용 네트워크 인터페이스에 할당된 IPv4 주소입" -"니다. 자동으로 검색됩니다.</p>\n" -"\t\t<p><b><big>멀티캐스트 주소</big></b><br>동기화에 사용할 멀티캐스트 주소입" -"니다.</p>\n" -"\t\t<p><b><big>그룹 번호</big></b><br>동기화에 사용할 그룹을 나타내는 숫자 ID" -"입니다.</p>\n" +"\t\t<p><b><big>전용 인터페이스</big></b><br>동기화에 사용되는 전용 네트워크 인터페이스입니다. 인터페이스는 멀티캐스트를 지원해야 하며 사용을 위해 UP 상태여야 합니다. 미리 구성되도록 해야 할 수도 있습니다. </p>\n" +"\t\t<p><b><big>IP</big></b><br>전용 네트워크 인터페이스에 할당된 IPv4 주소입니다. 자동으로 검색됩니다.</p>\n" +"\t\t<p><b><big>멀티캐스트 주소</big></b><br>동기화에 사용할 멀티캐스트 주소입니다.</p>\n" +"\t\t<p><b><big>그룹 번호</big></b><br>동기화에 사용할 그룹을 나타내는 숫자 ID입니다.</p>\n" "\t" -#. Read dialog help 1/2 -#: src/include/cluster/helps.rb:71 +#. Read dialog help 1/2 +#: src/include/cluster/helps.rb:71 msgid "" "<p><b><big>Initializing cluster Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -587,8 +453,8 @@ "<p><b><big>클러스터 구성 초기화 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/cluster/helps.rb:75 +#. Read dialog help 2/2 +#: src/include/cluster/helps.rb:75 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -596,8 +462,8 @@ "<p><b><big>초기화 중단 중:</big></b><br>\n" "지금 <b>취소</b>를 눌러 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/cluster/helps.rb:79 +#. Write dialog help 1/2 +#: src/include/cluster/helps.rb:79 msgid "" "<p><b><big>Saving cluster Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -605,8 +471,8 @@ "<p><b><big>클러스터 구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/cluster/helps.rb:83 +#. Write dialog help 2/2 +#: src/include/cluster/helps.rb:83 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -618,107 +484,107 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Initialization dialog caption -#: src/include/cluster/wizards.rb:172 +#. Initialization dialog caption +#: src/include/cluster/wizards.rb:172 msgid "Cluster Configuration" msgstr "클러스터 구성" -#. Initialization dialog contents -#: src/include/cluster/wizards.rb:174 +#. Initialization dialog contents +#: src/include/cluster/wizards.rb:174 msgid "Initializing..." msgstr "초기화 중..." -#. Cluster read dialog caption -#: src/modules/Cluster.rb:394 +#. Cluster read dialog caption +#: src/modules/Cluster.rb:394 msgid "Initializing cluster Configuration" msgstr "클러스터 구성 초기화 중" -#. Progress stage 1/3 -#: src/modules/Cluster.rb:410 +#. Progress stage 1/3 +#: src/modules/Cluster.rb:410 msgid "Read the database" msgstr "데이터베이스 읽기" -#. Progress stage 2/3 -#: src/modules/Cluster.rb:412 +#. Progress stage 2/3 +#: src/modules/Cluster.rb:412 msgid "Read the previous settings" msgstr "이전 설정 읽기" -#. Progress stage 3/3 -#: src/modules/Cluster.rb:414 +#. Progress stage 3/3 +#: src/modules/Cluster.rb:414 msgid "Read SuSEFirewall Settings" msgstr "SuSEFirewall 설정 읽기" -#. Progress step 1/3 -#: src/modules/Cluster.rb:418 +#. Progress step 1/3 +#: src/modules/Cluster.rb:418 msgid "Reading the database..." msgstr "데이터베이스를 읽는 중..." -#. Progress step 2/3 -#: src/modules/Cluster.rb:420 +#. Progress step 2/3 +#: src/modules/Cluster.rb:420 msgid "Reading the previous settings..." msgstr "이전 설정을 읽는 중..." -#. Progress step 3/3 -#: src/modules/Cluster.rb:422 +#. Progress step 3/3 +#: src/modules/Cluster.rb:422 msgid "Reading SuSEFirewall settings..." msgstr "SuSEFirewall 설정을 읽는 중입니다." -#. Progress finished -#. Progress finished -#: src/modules/Cluster.rb:424 src/modules/Cluster.rb:526 +#. Progress finished +#. Progress finished +#: src/modules/Cluster.rb:424 src/modules/Cluster.rb:526 msgid "Finished" msgstr "완료됨" -#: src/modules/Cluster.rb:439 +#: src/modules/Cluster.rb:439 msgid "Cannot install required package" msgstr "필수 패키지를 설치할 수 없습니다." -#. read database -#: src/modules/Cluster.rb:448 +#. read database +#: src/modules/Cluster.rb:448 msgid "Cannot load existing configuration" msgstr "기존 구성을 로드할 수 없습니다." -#. Error message -#: src/modules/Cluster.rb:459 +#. Error message +#: src/modules/Cluster.rb:459 msgid "Cannot read database1." msgstr "database1을 읽을 수 없습니다." -#. Error message -#: src/modules/Cluster.rb:467 +#. Error message +#: src/modules/Cluster.rb:467 msgid "Cannot read database2." msgstr "database2를 읽을 수 없습니다." -#. Error message -#: src/modules/Cluster.rb:483 +#. Error message +#: src/modules/Cluster.rb:483 msgid "Cannot detect devices." msgstr "장치를 감지할 수 없습니다." -#. Cluster read dialog caption -#: src/modules/Cluster.rb:501 +#. Cluster read dialog caption +#: src/modules/Cluster.rb:501 msgid "Saving cluster Configuration" msgstr "클러스터 구성 저장" -#. Progress stage 1/2 -#: src/modules/Cluster.rb:516 +#. Progress stage 1/2 +#: src/modules/Cluster.rb:516 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress stage 2/2 -#: src/modules/Cluster.rb:518 +#. Progress stage 2/2 +#: src/modules/Cluster.rb:518 msgid "Save changes to SuSEFirewall" msgstr "SuSEFirewall 변경사항 저장" -#. Progress step 1/2 -#: src/modules/Cluster.rb:522 +#. Progress step 1/2 +#: src/modules/Cluster.rb:522 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Progress step 2/2 -#: src/modules/Cluster.rb:524 +#. Progress step 2/2 +#: src/modules/Cluster.rb:524 msgid "Saving changes to SuSEFirewall..." msgstr "SuSEFirewall 변경사항을 저장하는 중입니다." -#. Error message -#: src/modules/Cluster.rb:536 +#. Error message +#: src/modules/Cluster.rb:536 msgid "Cannot write settings." msgstr "설정을 쓸 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/control-center.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/control-center.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/control-center.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,25 +14,24 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#: src/main_window.cpp:150 src/main_window.cpp:150 +#: src/main_window.cpp:150 msgid "&Search" msgstr "검색(&S)" -#: src/main_window.cpp:191 src/main_window.cpp:191 +#: src/main_window.cpp:191 msgid "Ready" msgstr "준비" -#. Translators: module name comes here (%1) e.g. HTTP server, Scanner,... -#: src/main_window.cpp:321 src/main_window.cpp:321 +#. Translators: module name comes here (%1) e.g. HTTP server, Scanner,... +#: src/main_window.cpp:321 msgid "Starting configuration module \"%1\"..." msgstr "구성 모듈 \"%1\" 시작..." -#: src/main_window.cpp:341 src/main_window.cpp:406 src/main_window.cpp:341 -#: src/main_window.cpp:406 +#: src/main_window.cpp:341 src/main_window.cpp:406 msgid "YaST Control Center" msgstr "YaST Control Center" -#: src/main_window.cpp:342 src/main_window.cpp:342 +#: src/main_window.cpp:342 msgid "" "YaST Control Center is not running as root.\n" "You will only see modules which do not require root privileges." @@ -40,25 +39,25 @@ "YaST Control Center가 root로 실행되고 있지 않습니다.\n" "root 권한이 필요하지 않은 모듈만 볼 수 있습니다." -#: src/yqsavelogs.cpp:73 +#: src/yqsavelogs.cpp:73 msgid "Log files written successfully." msgstr "로그 파일을 작성했습니다." -#: src/yqsavelogs.cpp:77 +#: src/yqsavelogs.cpp:77 msgid "Couldn't save y2logs." msgstr "y2logs를 저장할 수 없습니다." -#: src/yqsavelogs.cpp:136 +#: src/yqsavelogs.cpp:136 msgid "Writing log files ..." msgstr "로그 파일 작성 중..." -#. Confirm if the user wishes to overwrite an existing file -#: src/yqsavelogs.cpp:180 +#. Confirm if the user wishes to overwrite an existing file +#: src/yqsavelogs.cpp:180 msgid "%1 exists! Really overwrite?" msgstr "%1이(가) 존재합니다. 덮어쓰시겠습니까?" -#. Confirm if the user wishes to overwrite a write-protected file %1 -#: src/yqsavelogs.cpp:185 +#. Confirm if the user wishes to overwrite a write-protected file %1 +#: src/yqsavelogs.cpp:185 msgid "" "%1 exists and is write-protected!\n" "Really overwrite?" @@ -66,15 +65,15 @@ "%1이(가) 존재하거나 쓰기 보호되었습니다.\n" "덮어쓰시겠습니까?" -#. Window title for confirmation dialog -#: src/yqsavelogs.cpp:190 +#. Window title for confirmation dialog +#: src/yqsavelogs.cpp:190 msgid "Confirm" msgstr "확인" -#: src/yqsavelogs.cpp:192 +#: src/yqsavelogs.cpp:192 msgid "C&ontinue" msgstr "계속(&O)" -#: src/yqsavelogs.cpp:193 +#: src/yqsavelogs.cpp:193 msgid "&Cancel" msgstr "취소(&C)" Modified: branches/SLE12-SP3/yast/ko/po/control.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/control.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/control.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,7 +14,7 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#: control/control.SLES.glade.translations.glade:3 +#: control/control.SLES.glade.translations.glade:3 msgid "" "\n" "<p>\n" @@ -38,17 +38,17 @@ "</p>\n" " " -#: control/control.SLES.glade.translations.glade:14 +#: control/control.SLES.glade.translations.glade:14 msgid "CIM Server" msgstr "CIM 서버" -#. TRANSLATORS: dialog caption -#: control/control.SLES.glade.translations.glade:16 +#. TRANSLATORS: dialog caption +#: control/control.SLES.glade.translations.glade:16 msgid "System Role" msgstr "시스템 역할" -#. TRANSLATORS: label in a dialog -#: control/control.SLES.glade.translations.glade:18 +#. TRANSLATORS: label in a dialog +#: control/control.SLES.glade.translations.glade:18 msgid "" "System Roles are predefined use cases which tailor the system\n" "for the selected scenario." @@ -56,8 +56,8 @@ "시스템 역할은 시스템을 선택한 시나리오에 맞게\n" "사용자 정의하는 사전 정의된 사용 사례입니다." -#. TRANSLATORS: dialog help -#: control/control.SLES.glade.translations.glade:21 +#. TRANSLATORS: dialog help +#: control/control.SLES.glade.translations.glade:21 msgid "" "<p>The system roles adjustments are in the range from package selection up \n" "to disk partitioning. By choosing a system role, the system is \n" @@ -65,17 +65,16 @@ "defined by a role can be overridden in the next steps if necessary.</p>" msgstr "" "<p>시스템 역할 조정 범위는 패키지 선택부터 \n" -"디스크 파티셔닝까지입니다. 시스템 역할을 선택하면 시스템이 역할의 사용 사례" -"에 맞게 \n" +"디스크 파티셔닝까지입니다. 시스템 역할을 선택하면 시스템이 역할의 사용 사례에 맞게 \n" "구성됩니다. 역할에 따라 정의된 설정은 \n" "필요한 경우 다음 단계에서 무효화될 수 있습니다.</p>" -#. TRANSLATORS: a label for a system role -#: control/control.SLES.glade.translations.glade:26 +#. TRANSLATORS: a label for a system role +#: control/control.SLES.glade.translations.glade:26 msgid "Default System" msgstr "기본 시스템" -#: control/control.SLES.glade.translations.glade:27 +#: control/control.SLES.glade.translations.glade:27 msgid "" "• GNOME environment, with Btrfs root (/) partition\n" "• Separate /home partition (XFS) for disks larger than 20GB" @@ -83,12 +82,12 @@ "• Btrfs 루트(/) 파티션을 포함한 GNOME 환경\n" "• 20GB 이상의 디스크를 위한 개별 /home 파티션(XFS)" -#. TRANSLATORS: a label for a system role -#: control/control.SLES.glade.translations.glade:30 +#. TRANSLATORS: a label for a system role +#: control/control.SLES.glade.translations.glade:30 msgid "KVM Virtualization Host" msgstr "KVM 가상화 호스트" -#: control/control.SLES.glade.translations.glade:31 +#: control/control.SLES.glade.translations.glade:31 msgid "" "• Kernel-based hypervisor and tools\n" "• No separate /home partition" @@ -96,12 +95,12 @@ "• 커널 기반 하이퍼바이저 및 도구\n" "• 개별 /home 파티션 없음" -#. TRANSLATORS: a label for a system role -#: control/control.SLES.glade.translations.glade:34 +#. TRANSLATORS: a label for a system role +#: control/control.SLES.glade.translations.glade:34 msgid "Xen Virtualization Host" msgstr "Xen 가상화 호스트" -#: control/control.SLES.glade.translations.glade:35 +#: control/control.SLES.glade.translations.glade:35 msgid "" "• Bare metal hypervisor and tools\n" "• No separate /home partition" @@ -109,206 +108,206 @@ "• 베어메탈 하이퍼바이저 및 도구\n" "• 개별 /home 파티션 없음" -#: control/control.SLES.glade.translations.glade:37 -#: control/control.SLES.glade.translations.glade:38 -#: control/control.SLES.glade.translations.glade:39 -#: control/control.SLES.glade.translations.glade:44 -#: control/control.SLES.glade.translations.glade:45 -#: control/control.SLES.glade.translations.glade:82 -#: control/control.SLES.glade.translations.glade:83 +#: control/control.SLES.glade.translations.glade:37 +#: control/control.SLES.glade.translations.glade:38 +#: control/control.SLES.glade.translations.glade:39 +#: control/control.SLES.glade.translations.glade:44 +#: control/control.SLES.glade.translations.glade:45 +#: control/control.SLES.glade.translations.glade:82 +#: control/control.SLES.glade.translations.glade:83 msgid "Installation Settings" msgstr "설치 설정" -#: control/control.SLES.glade.translations.glade:40 +#: control/control.SLES.glade.translations.glade:40 msgid "Overview" msgstr "개요" -#: control/control.SLES.glade.translations.glade:41 +#: control/control.SLES.glade.translations.glade:41 msgid "Expert" msgstr "고급" -#: control/control.SLES.glade.translations.glade:42 +#: control/control.SLES.glade.translations.glade:42 msgid "Live Installation Settings" msgstr "라이브 설치 설정" -#: control/control.SLES.glade.translations.glade:43 +#: control/control.SLES.glade.translations.glade:43 msgid "Update Settings" msgstr "업데이트 설정" -#: control/control.SLES.glade.translations.glade:46 -#: control/control.SLES.glade.translations.glade:47 +#: control/control.SLES.glade.translations.glade:46 +#: control/control.SLES.glade.translations.glade:47 msgid "Network Configuration" msgstr "네트워크 구성" -#: control/control.SLES.glade.translations.glade:48 +#: control/control.SLES.glade.translations.glade:48 msgid "Network Services Configuration" msgstr "네트워크 서비스 구성" -#: control/control.SLES.glade.translations.glade:49 -#: control/control.SLES.glade.translations.glade:50 -#: control/control.SLES.glade.translations.glade:51 +#: control/control.SLES.glade.translations.glade:49 +#: control/control.SLES.glade.translations.glade:50 +#: control/control.SLES.glade.translations.glade:51 msgid "Hardware Configuration" msgstr "하드웨어 구성" -#: control/control.SLES.glade.translations.glade:52 -#: control/control.SLES.glade.translations.glade:89 -#: control/control.SLES.glade.translations.glade:119 +#: control/control.SLES.glade.translations.glade:52 +#: control/control.SLES.glade.translations.glade:89 +#: control/control.SLES.glade.translations.glade:119 msgid "Preparation" msgstr "준비" -#: control/control.SLES.glade.translations.glade:53 -#: control/control.SLES.glade.translations.glade:76 -#: control/control.SLES.glade.translations.glade:90 +#: control/control.SLES.glade.translations.glade:53 +#: control/control.SLES.glade.translations.glade:76 +#: control/control.SLES.glade.translations.glade:90 msgid "Load Linuxrc Network Configuration" msgstr "Linuxrc 네트워크 구성 로드" -#: control/control.SLES.glade.translations.glade:54 -#: control/control.SLES.glade.translations.glade:77 -#: control/control.SLES.glade.translations.glade:91 +#: control/control.SLES.glade.translations.glade:54 +#: control/control.SLES.glade.translations.glade:77 +#: control/control.SLES.glade.translations.glade:91 msgid "Network Autosetup" msgstr "네트워크 자동 설정" -#: control/control.SLES.glade.translations.glade:55 -#: control/control.SLES.glade.translations.glade:92 -#: control/control.SLES.glade.translations.glade:108 -#: control/control.SLES.glade.translations.glade:120 +#: control/control.SLES.glade.translations.glade:55 +#: control/control.SLES.glade.translations.glade:92 +#: control/control.SLES.glade.translations.glade:108 +#: control/control.SLES.glade.translations.glade:120 msgid "Installer Update" msgstr "설치 프로그램 업데이트" -#: control/control.SLES.glade.translations.glade:56 -#: control/control.SLES.glade.translations.glade:78 -#: control/control.SLES.glade.translations.glade:93 +#: control/control.SLES.glade.translations.glade:56 +#: control/control.SLES.glade.translations.glade:78 +#: control/control.SLES.glade.translations.glade:93 msgid "Welcome" msgstr "시작" -#: control/control.SLES.glade.translations.glade:57 -#: control/control.SLES.glade.translations.glade:79 -#: control/control.SLES.glade.translations.glade:94 +#: control/control.SLES.glade.translations.glade:57 +#: control/control.SLES.glade.translations.glade:79 +#: control/control.SLES.glade.translations.glade:94 msgid "Network Activation" msgstr "네트워크 활성화" -#: control/control.SLES.glade.translations.glade:58 -#: control/control.SLES.glade.translations.glade:95 +#: control/control.SLES.glade.translations.glade:58 +#: control/control.SLES.glade.translations.glade:95 msgid "Disk Activation" msgstr "디스크 활성화" -#: control/control.SLES.glade.translations.glade:59 -#: control/control.SLES.glade.translations.glade:60 -#: control/control.SLES.glade.translations.glade:96 -#: control/control.SLES.glade.translations.glade:121 +#: control/control.SLES.glade.translations.glade:59 +#: control/control.SLES.glade.translations.glade:60 +#: control/control.SLES.glade.translations.glade:96 +#: control/control.SLES.glade.translations.glade:121 msgid "System Analysis" msgstr "시스템 분석" -#: control/control.SLES.glade.translations.glade:61 -#: control/control.SLES.glade.translations.glade:98 +#: control/control.SLES.glade.translations.glade:61 +#: control/control.SLES.glade.translations.glade:98 msgid "Add-On Products" msgstr "추가 기능 제품" -#: control/control.SLES.glade.translations.glade:62 -#: control/control.SLES.glade.translations.glade:80 +#: control/control.SLES.glade.translations.glade:62 +#: control/control.SLES.glade.translations.glade:80 msgid "Disk" msgstr "디스크" -#: control/control.SLES.glade.translations.glade:63 -#: control/control.SLES.glade.translations.glade:81 +#: control/control.SLES.glade.translations.glade:63 +#: control/control.SLES.glade.translations.glade:81 msgid "Time Zone" msgstr "시간대" -#: control/control.SLES.glade.translations.glade:64 -#: control/control.SLES.glade.translations.glade:75 +#: control/control.SLES.glade.translations.glade:64 +#: control/control.SLES.glade.translations.glade:75 msgid "Installation" msgstr "설치" -#: control/control.SLES.glade.translations.glade:65 +#: control/control.SLES.glade.translations.glade:65 msgid "Installation Summary" msgstr "설치 요약" -#: control/control.SLES.glade.translations.glade:66 -#: control/control.SLES.glade.translations.glade:67 -#: control/control.SLES.glade.translations.glade:69 -#: control/control.SLES.glade.translations.glade:70 -#: control/control.SLES.glade.translations.glade:71 -#: control/control.SLES.glade.translations.glade:72 -#: control/control.SLES.glade.translations.glade:73 -#: control/control.SLES.glade.translations.glade:74 -#: control/control.SLES.glade.translations.glade:84 -#: control/control.SLES.glade.translations.glade:85 -#: control/control.SLES.glade.translations.glade:86 -#: control/control.SLES.glade.translations.glade:87 -#: control/control.SLES.glade.translations.glade:88 -#: control/control.SLES.glade.translations.glade:112 -#: control/control.SLES.glade.translations.glade:113 -#: control/control.SLES.glade.translations.glade:115 -#: control/control.SLES.glade.translations.glade:116 -#: control/control.SLES.glade.translations.glade:117 -#: control/control.SLES.glade.translations.glade:118 -#: control/control.SLES.glade.translations.glade:135 -#: control/control.SLES.glade.translations.glade:136 +#: control/control.SLES.glade.translations.glade:66 +#: control/control.SLES.glade.translations.glade:67 +#: control/control.SLES.glade.translations.glade:69 +#: control/control.SLES.glade.translations.glade:70 +#: control/control.SLES.glade.translations.glade:71 +#: control/control.SLES.glade.translations.glade:72 +#: control/control.SLES.glade.translations.glade:73 +#: control/control.SLES.glade.translations.glade:74 +#: control/control.SLES.glade.translations.glade:84 +#: control/control.SLES.glade.translations.glade:85 +#: control/control.SLES.glade.translations.glade:86 +#: control/control.SLES.glade.translations.glade:87 +#: control/control.SLES.glade.translations.glade:88 +#: control/control.SLES.glade.translations.glade:112 +#: control/control.SLES.glade.translations.glade:113 +#: control/control.SLES.glade.translations.glade:115 +#: control/control.SLES.glade.translations.glade:116 +#: control/control.SLES.glade.translations.glade:117 +#: control/control.SLES.glade.translations.glade:118 +#: control/control.SLES.glade.translations.glade:135 +#: control/control.SLES.glade.translations.glade:136 msgid "Perform Installation" msgstr "설치 실행" -#: control/control.SLES.glade.translations.glade:68 -#: control/control.SLES.glade.translations.glade:103 -#: control/control.SLES.glade.translations.glade:114 -#: control/control.SLES.glade.translations.glade:130 +#: control/control.SLES.glade.translations.glade:68 +#: control/control.SLES.glade.translations.glade:103 +#: control/control.SLES.glade.translations.glade:114 +#: control/control.SLES.glade.translations.glade:130 msgid "Installer Cleanup" msgstr "설치 프로그램 정리" -#: control/control.SLES.glade.translations.glade:97 -#: control/control.SLES.glade.translations.glade:122 +#: control/control.SLES.glade.translations.glade:97 +#: control/control.SLES.glade.translations.glade:122 msgid "System for Update" msgstr "업데이트할 시스템" -#: control/control.SLES.glade.translations.glade:99 -#: control/control.SLES.glade.translations.glade:125 +#: control/control.SLES.glade.translations.glade:99 +#: control/control.SLES.glade.translations.glade:125 msgid "Update" msgstr "업데이트" -#: control/control.SLES.glade.translations.glade:100 +#: control/control.SLES.glade.translations.glade:100 msgid "Update Summary" msgstr "업데이트 요약" -#: control/control.SLES.glade.translations.glade:101 -#: control/control.SLES.glade.translations.glade:102 -#: control/control.SLES.glade.translations.glade:104 -#: control/control.SLES.glade.translations.glade:105 -#: control/control.SLES.glade.translations.glade:106 -#: control/control.SLES.glade.translations.glade:127 -#: control/control.SLES.glade.translations.glade:128 -#: control/control.SLES.glade.translations.glade:129 -#: control/control.SLES.glade.translations.glade:131 -#: control/control.SLES.glade.translations.glade:132 -#: control/control.SLES.glade.translations.glade:133 -#: control/control.SLES.glade.translations.glade:134 -#: control/control.SLES.glade.translations.glade:139 -#: control/control.SLES.glade.translations.glade:140 +#: control/control.SLES.glade.translations.glade:101 +#: control/control.SLES.glade.translations.glade:102 +#: control/control.SLES.glade.translations.glade:104 +#: control/control.SLES.glade.translations.glade:105 +#: control/control.SLES.glade.translations.glade:106 +#: control/control.SLES.glade.translations.glade:127 +#: control/control.SLES.glade.translations.glade:128 +#: control/control.SLES.glade.translations.glade:129 +#: control/control.SLES.glade.translations.glade:131 +#: control/control.SLES.glade.translations.glade:132 +#: control/control.SLES.glade.translations.glade:133 +#: control/control.SLES.glade.translations.glade:134 +#: control/control.SLES.glade.translations.glade:139 +#: control/control.SLES.glade.translations.glade:140 msgid "Perform Update" msgstr "업데이트 실행" -#: control/control.SLES.glade.translations.glade:107 +#: control/control.SLES.glade.translations.glade:107 msgid "Base Installation" msgstr "기본 설치" -#: control/control.SLES.glade.translations.glade:109 -#: control/control.SLES.glade.translations.glade:110 -#: control/control.SLES.glade.translations.glade:111 -#: control/control.SLES.glade.translations.glade:123 -#: control/control.SLES.glade.translations.glade:124 -#: control/control.SLES.glade.translations.glade:126 +#: control/control.SLES.glade.translations.glade:109 +#: control/control.SLES.glade.translations.glade:110 +#: control/control.SLES.glade.translations.glade:111 +#: control/control.SLES.glade.translations.glade:123 +#: control/control.SLES.glade.translations.glade:124 +#: control/control.SLES.glade.translations.glade:126 msgid "AutoYaST Settings" msgstr "AutoYaST 설정" -#: control/control.SLES.glade.translations.glade:137 -#: control/control.SLES.glade.translations.glade:141 +#: control/control.SLES.glade.translations.glade:137 +#: control/control.SLES.glade.translations.glade:141 msgid "Configuration" msgstr "구성" -#: control/control.SLES.glade.translations.glade:138 -#: control/control.SLES.glade.translations.glade:142 +#: control/control.SLES.glade.translations.glade:138 +#: control/control.SLES.glade.translations.glade:142 msgid "System Configuration" msgstr "시스템 구성" -#: control/control.SLED.glade.translations.glade:3 +#: control/control.SLED.glade.translations.glade:3 msgid "" "\n" "<p>\n" @@ -332,30 +331,30 @@ "</p>\n" " " -#: control/control.SLED.glade.translations.glade:26 -#: control/control.SLED.glade.translations.glade:52 -#: control/control.SLED.glade.translations.glade:66 +#: control/control.SLED.glade.translations.glade:26 +#: control/control.SLED.glade.translations.glade:52 +#: control/control.SLED.glade.translations.glade:66 msgid "Load linuxrc Network Configuration" msgstr "Linuxrc 네트워크 구성 로드" -#: control/control.SLED.glade.translations.glade:37 -#: control/control.SLED.glade.translations.glade:38 +#: control/control.SLED.glade.translations.glade:37 +#: control/control.SLED.glade.translations.glade:38 msgid "User Settings" msgstr "사용자 설정" -#: control/control.SLED.glade.translations.glade:39 +#: control/control.SLED.glade.translations.glade:39 msgid "Installation Overview" msgstr "설치 개요" -#: control/installation.glade.translations.glade:3 +#: control/installation.glade.translations.glade:3 msgid "Add-On Product Installation" msgstr "Add-On 설치" -#: control/installation.glade.translations.glade:4 +#: control/installation.glade.translations.glade:4 msgid "Language Installation" msgstr "언어 설치" -#: control/control.openSUSE.glade.translations.glade:3 +#: control/control.openSUSE.glade.translations.glade:3 msgid "" "\n" "<p><b>Congratulations!</b></p>\n" @@ -373,7 +372,7 @@ "<p>즐거운 시간 보내시기 바랍니다!<br>openSUSE 개발 팀</p>\n" " " -#: control/control.openSUSE.glade.translations.glade:10 +#: control/control.openSUSE.glade.translations.glade:10 msgid "" "The desktop environment on your computer provides the graphical user\n" "interface for your computer, as well as a suite of applications for\n" @@ -399,39 +398,39 @@ "분명한 스타일이 있으므로 개인 취향에 따라 가장 적합한\n" "데스크톱을 선택하면 됩니다." -#: control/control.openSUSE.glade.translations.glade:21 +#: control/control.openSUSE.glade.translations.glade:21 msgid "GNOME Desktop" msgstr "GNOME 데스크톱" -#: control/control.openSUSE.glade.translations.glade:22 +#: control/control.openSUSE.glade.translations.glade:22 msgid "KDE Plasma Desktop" msgstr "KDE Plasma 데스크톱" -#: control/control.openSUSE.glade.translations.glade:23 +#: control/control.openSUSE.glade.translations.glade:23 msgid "Server (Text Mode)" msgstr "서버(텍스트 모드)" -#: control/control.openSUSE.glade.translations.glade:24 +#: control/control.openSUSE.glade.translations.glade:24 msgid "Xfce Desktop" msgstr "Xfce 데스크톱" -#: control/control.openSUSE.glade.translations.glade:25 +#: control/control.openSUSE.glade.translations.glade:25 msgid "LXDE Desktop" msgstr "LXDE 데스크톱" -#: control/control.openSUSE.glade.translations.glade:26 +#: control/control.openSUSE.glade.translations.glade:26 msgid "Minimal X Window" msgstr "최소 X Window" -#: control/control.openSUSE.glade.translations.glade:27 +#: control/control.openSUSE.glade.translations.glade:27 msgid "Enlightenment Desktop" msgstr "향상 데스크톱" -#: control/control.openSUSE.glade.translations.glade:45 -#: control/control.openSUSE.glade.translations.glade:71 +#: control/control.openSUSE.glade.translations.glade:45 +#: control/control.openSUSE.glade.translations.glade:71 msgid "Online Repositories" msgstr "온라인 리포지토리" -#: control/control.openSUSE.glade.translations.glade:47 +#: control/control.openSUSE.glade.translations.glade:47 msgid "Desktop Selection" msgstr "데스크톱 선택" Modified: branches/SLE12-SP3/yast/ko/po/country.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/country.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/country.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,63 +14,60 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help text for Securoty module -#: keyboard/src/clients/keyboard.rb:59 +#. translators: command line help text for Securoty module +#: keyboard/src/clients/keyboard.rb:59 msgid "Keyboard configuration." msgstr "키보드 구성" -#. command line help text for 'summary' action -#: keyboard/src/clients/keyboard.rb:72 +#. command line help text for 'summary' action +#: keyboard/src/clients/keyboard.rb:72 msgid "Keyboard configuration summary." msgstr "키보드 구성 요약" -#. command line help text for 'set' action -#: keyboard/src/clients/keyboard.rb:79 +#. command line help text for 'set' action +#: keyboard/src/clients/keyboard.rb:79 msgid "Set new values for keyboard configuration." msgstr "키보드 구성에 대해 새 값을 설정합니다." -#. command line help text for 'list' action -#: keyboard/src/clients/keyboard.rb:86 +#. command line help text for 'list' action +#: keyboard/src/clients/keyboard.rb:86 msgid "List all available keyboard layouts." msgstr "사용 가능한 모든 키보드 배열을 열거합니다." -#. command line help text for 'set layout' option -#: keyboard/src/clients/keyboard.rb:94 +#. command line help text for 'set layout' option +#: keyboard/src/clients/keyboard.rb:94 msgid "New keyboard layout" msgstr "새 키보드 배열" -#. summary label -#. summary label -#: keyboard/src/clients/keyboard.rb:160 keyboard/src/modules/Keyboard.rb:1388 +#. summary label +#. summary label +#: keyboard/src/clients/keyboard.rb:160 keyboard/src/modules/Keyboard.rb:1388 msgid "Current Keyboard Layout: %1" msgstr "현재 키보드 배열: %1" -#. error message (%1 is given layout); do not translate 'list' -#: keyboard/src/clients/keyboard.rb:184 -msgid "" -"Keyboard layout '%1' is invalid. Use a 'list' command to see possible values." -msgstr "" -"'%1' 키보드 배열은 잘못되었습니다. 가능한 값을 보려면 'list' 명령을 사용하십" -"시오." +#. error message (%1 is given layout); do not translate 'list' +#: keyboard/src/clients/keyboard.rb:184 +msgid "Keyboard layout '%1' is invalid. Use a 'list' command to see possible values." +msgstr "'%1' 키보드 배열은 잘못되었습니다. 가능한 값을 보려면 'list' 명령을 사용하십시오." -#. summary item -#: keyboard/src/clients/keyboard_proposal.rb:91 +#. summary item +#: keyboard/src/clients/keyboard_proposal.rb:91 msgid "Keyboard Layout" msgstr "키보드 배열" -#. menue label text -#. title for selection box 'keyboard layout' -#. widget label -#. menu button label -#: keyboard/src/clients/keyboard_proposal.rb:93 -#: keyboard/src/include/keyboard/dialogs.rb:187 -#: keyboard/src/lib/y2country/widgets.rb:40 -#: language/src/clients/country_simple_proposal.rb:78 +#. menue label text +#. title for selection box 'keyboard layout' +#. widget label +#. menu button label +#: keyboard/src/clients/keyboard_proposal.rb:93 +#: keyboard/src/include/keyboard/dialogs.rb:187 +#: keyboard/src/lib/y2country/widgets.rb:40 +#: language/src/clients/country_simple_proposal.rb:78 msgid "&Keyboard Layout" msgstr "키보드 배열(&K)" -#. help text for keyboard expert screen -#: keyboard/src/include/keyboard/dialogs.rb:52 +#. help text for keyboard expert screen +#: keyboard/src/include/keyboard/dialogs.rb:52 msgid "" "<p>\n" "Here, fine tune various settings of the keyboard module.\n" @@ -84,80 +81,76 @@ " 확실하지 않은 경우 이미 선택된 기본값을 사용하십시오.\n" " </p>" -#. help text for keyboard expert screen cont. -#: keyboard/src/include/keyboard/dialogs.rb:60 -msgid "" -"<p>Settings made here apply only to the console keyboard. Configure the " -"keyboard for the graphical user interface with another tool.</p>\n" -msgstr "" -"<p>여기서 지정한 설정은 콘솔 키보드에만 적용됩니다. 그래픽 사용자 인터페이스" -"용 키보드는 다른 도구로 구성하십시오.</p>\n" +#. help text for keyboard expert screen cont. +#: keyboard/src/include/keyboard/dialogs.rb:60 +msgid "<p>Settings made here apply only to the console keyboard. Configure the keyboard for the graphical user interface with another tool.</p>\n" +msgstr "<p>여기서 지정한 설정은 콘솔 키보드에만 적용됩니다. 그래픽 사용자 인터페이스용 키보드는 다른 도구로 구성하십시오.</p>\n" -#. heading text -#: keyboard/src/include/keyboard/dialogs.rb:78 +#. heading text +#: keyboard/src/include/keyboard/dialogs.rb:78 msgid "Expert Keyboard Settings" msgstr "고급 키보드 설정" -#. label text -#: keyboard/src/include/keyboard/dialogs.rb:85 +#. label text +#: keyboard/src/include/keyboard/dialogs.rb:85 msgid "Repeat &Rate" msgstr "반복률(&R) " -#. label text -#: keyboard/src/include/keyboard/dialogs.rb:93 +#. label text +#: keyboard/src/include/keyboard/dialogs.rb:93 msgid "De&lay before Repetition Starts" msgstr "반복 시작 전의 지연(&L)" -#. frame label -#: keyboard/src/include/keyboard/dialogs.rb:99 +#. frame label +#: keyboard/src/include/keyboard/dialogs.rb:99 msgid "Start-Up States" msgstr "시작 상태" -#. combobox label -#: keyboard/src/include/keyboard/dialogs.rb:105 +#. combobox label +#: keyboard/src/include/keyboard/dialogs.rb:105 msgid "&Num Lock On" msgstr "Num Lock 켜짐(&N)" -#. combobox item -#: keyboard/src/include/keyboard/dialogs.rb:108 +#. combobox item +#: keyboard/src/include/keyboard/dialogs.rb:108 msgid "BIOS Settings" msgstr "BIOS 설정" -#. combobox item -#: keyboard/src/include/keyboard/dialogs.rb:110 -#: language/src/clients/select_language.rb:644 +#. combobox item +#: keyboard/src/include/keyboard/dialogs.rb:110 +#: language/src/clients/select_language.rb:644 msgid "Yes" msgstr "예" -#. combobox item -#: keyboard/src/include/keyboard/dialogs.rb:112 -#: language/src/clients/select_language.rb:645 +#. combobox item +#: keyboard/src/include/keyboard/dialogs.rb:112 +#: language/src/clients/select_language.rb:645 msgid "No" msgstr "아니오" -#. combobox item -#: keyboard/src/include/keyboard/dialogs.rb:114 +#. combobox item +#: keyboard/src/include/keyboard/dialogs.rb:114 msgid "<Untouched>" msgstr "<손상대지 않음>" -#. label text -#: keyboard/src/include/keyboard/dialogs.rb:125 +#. label text +#: keyboard/src/include/keyboard/dialogs.rb:125 msgid "D&isable Caps Lock" msgstr "Caps Lock 비활성화(&I)" -#. title for input field to test the keyboard setting -#. (no more than about 25 characters!) -#: keyboard/src/include/keyboard/dialogs.rb:193 +#. title for input field to test the keyboard setting +#. (no more than about 25 characters!) +#: keyboard/src/include/keyboard/dialogs.rb:193 msgid "&Test" msgstr "테스트(&T)" -#. push button -#: keyboard/src/include/keyboard/dialogs.rb:203 +#. push button +#: keyboard/src/include/keyboard/dialogs.rb:203 msgid "E&xpert Settings..." msgstr "고급 설정(&X)..." -#. help text for keyboard screen (header) -#: keyboard/src/include/keyboard/dialogs.rb:220 +#. help text for keyboard screen (header) +#: keyboard/src/include/keyboard/dialogs.rb:220 msgid "" "\n" "<p><big><b>Keyboard Configuration</b></big></p>" @@ -165,27 +158,25 @@ "\n" "<p><big><b>키보드 구성</b></big></p>" -#. help text for keyboard screen (installation) -#: keyboard/src/include/keyboard/dialogs.rb:226 +#. help text for keyboard screen (installation) +#: keyboard/src/include/keyboard/dialogs.rb:226 msgid "" "<p>\n" "Choose the <b>Keyboard Layout</b> to use for\n" "installation and in the installed system. \n" "Test the layout in <b>Test</b>.\n" -"For advanced options, such as repeat rate and delay, select <b>Expert " -"Settings</b>.\n" +"For advanced options, such as repeat rate and delay, select <b>Expert Settings</b>.\n" "</p>\n" msgstr "" "<p>\n" "설치하는 동안 및 설치된 시스템에 사용할 <b>키보드 배열</b>을\n" " 선택합니다. \n" " <b>테스트</b>에서 배열을 테스트합니다.\n" -" 반복 속도 및 지연과 같은 고급 옵션을 사용하려면 <b>고급 설정</b>을 선택합니" -"다.\n" +" 반복 속도 및 지연과 같은 고급 옵션을 사용하려면 <b>고급 설정</b>을 선택합니다.\n" " </p>\n" -#. general help trailer -#: keyboard/src/include/keyboard/dialogs.rb:238 +#. general help trailer +#: keyboard/src/include/keyboard/dialogs.rb:238 msgid "" "<p>\n" "If unsure, use the default values already selected.\n" @@ -195,30 +186,26 @@ "만약 확실하지 않으면 미리 선택된 기본값을 쓰시오.\n" "</p>" -#. help text for keyboard screen (installation) -#: keyboard/src/include/keyboard/dialogs.rb:248 +#. help text for keyboard screen (installation) +#: keyboard/src/include/keyboard/dialogs.rb:248 msgid "" "<p>\n" "Choose the <b>Keyboard Layout</b> to use in the system.\n" -"For advanced options, such as repeat rate and delay, select <b>Expert " -"Settings</b>.</p>\n" -"<p>Find more options as well as more layouts in the keyboard layout tool of " -"your desktop environment.</p>\n" +"For advanced options, such as repeat rate and delay, select <b>Expert Settings</b>.</p>\n" +"<p>Find more options as well as more layouts in the keyboard layout tool of your desktop environment.</p>\n" msgstr "" "<p>\n" "시스템에 사용할 <b>키보드 배열</b>을 선택하십시오.\n" -"반복 속도 및 지연과 같은 자세한 설정을 하려면 <b>고급 설정</b>을 선택하십시" -"오.</p>\n" -"<p>사용자 데스크탑 환경의 키보드 배열 도구 안에서 기타 배열과 같은 옵션을 찾" -"을 수 있습니다.</p>\n" +"반복 속도 및 지연과 같은 자세한 설정을 하려면 <b>고급 설정</b>을 선택하십시오.</p>\n" +"<p>사용자 데스크탑 환경의 키보드 배열 도구 안에서 기타 배열과 같은 옵션을 찾을 수 있습니다.</p>\n" -#. Screen title for keyboard screen -#: keyboard/src/include/keyboard/dialogs.rb:259 +#. Screen title for keyboard screen +#: keyboard/src/include/keyboard/dialogs.rb:259 msgid "System Keyboard Configuration" msgstr "시스템 키보드 구성" -#. help text for keyboard selection widget -#: keyboard/src/lib/y2country/widgets.rb:80 +#. help text for keyboard selection widget +#: keyboard/src/lib/y2country/widgets.rb:80 msgid "" "<p>\n" "Choose the <b>Keyboard layout</b> to be used during\n" @@ -230,12 +217,12 @@ "<b>키보드 배열</b>을 선택합니다.\n" "</p>\n" -#. label text: user can choose the keyboard from the updated system -#. or continue with the one defined by his language. -#. 2 radio-buttons follow this label. -#. Such keyboard layout is used only for the time of the update, -#. it is not saved to the system. -#: keyboard/src/modules/Keyboard.rb:1299 +#. label text: user can choose the keyboard from the updated system +#. or continue with the one defined by his language. +#. 2 radio-buttons follow this label. +#. Such keyboard layout is used only for the time of the update, +#. it is not saved to the system. +#: keyboard/src/modules/Keyboard.rb:1299 msgid "" "You are currently using a keyboard layout\n" "different from the one in the system to update.\n" @@ -245,183 +232,179 @@ "현재 사용하고 있습니다.\n" " 업데이트하는 동안 사용할 배열을 선택하십시오:" -#. Executes the command to set the keyboard in X11, reporting -#. any error to the user -#: keyboard/src/modules/Keyboard.rb:1498 +#. Executes the command to set the keyboard in X11, reporting +#. any error to the user +#: keyboard/src/modules/Keyboard.rb:1498 msgid "Failed to set X11 keyboard to '%s'" msgstr "X11 키보드를 '%s'(으)로 설정하지 못함" -#. summary label <%1>-<%2> are HTML tags, leave untouched -#: language/src/clients/country_simple_proposal.rb:45 +#. summary label <%1>-<%2> are HTML tags, leave untouched +#: language/src/clients/country_simple_proposal.rb:45 msgid "<%1>Keyboard Layout<%2>: %3" msgstr "<%1>키보드 배열<%2>: %3" -#. summary label <%1>-<%2> are HTML tags, leave untouched -#: language/src/clients/country_simple_proposal.rb:56 +#. summary label <%1>-<%2> are HTML tags, leave untouched +#: language/src/clients/country_simple_proposal.rb:56 msgid "<%1>Language<%2>: %3" msgstr "<%1>언어<%2>: %3" -#. rich text label -#: language/src/clients/country_simple_proposal.rb:73 +#. rich text label +#: language/src/clients/country_simple_proposal.rb:73 msgid "Locale Settings" msgstr "로케일 설정" -#. menu button label -#. menue label text -#: language/src/clients/country_simple_proposal.rb:76 -#: language/src/clients/language_proposal.rb:133 +#. menu button label +#. menue label text +#: language/src/clients/country_simple_proposal.rb:76 +#: language/src/clients/language_proposal.rb:133 msgid "&Language" msgstr "언어(&L)" -#. translators: command line help text for language module -#: language/src/clients/language.rb:56 +#. translators: command line help text for language module +#: language/src/clients/language.rb:56 msgid "Language configuration" msgstr "언어 구성" -#. command line help text for 'summary' action -#: language/src/clients/language.rb:69 +#. command line help text for 'summary' action +#: language/src/clients/language.rb:69 msgid "Language configuration summary" msgstr "언어 구성 요약" -#. command line help text for 'set' action -#: language/src/clients/language.rb:76 +#. command line help text for 'set' action +#: language/src/clients/language.rb:76 msgid "Set new values for language" msgstr "언어에 대해 새 값을 설정합니다." -#. command line help text for 'list' action -#: language/src/clients/language.rb:83 +#. command line help text for 'list' action +#: language/src/clients/language.rb:83 msgid "List all available languages." msgstr "사용 가능한 모든 언어를 열거합니다." -#. command line help text for 'set lang' option -#: language/src/clients/language.rb:91 +#. command line help text for 'set lang' option +#: language/src/clients/language.rb:91 msgid "New language value" msgstr "새 언어 값" -#. command line help text for 'set languages' option -#: language/src/clients/language.rb:98 +#. command line help text for 'set languages' option +#: language/src/clients/language.rb:98 msgid "List of secondary languages (separated by commas)" msgstr "보조 언어 목록(쉼표로 구분)" -#. command line help text for 'set no_packages' option -#: language/src/clients/language.rb:105 +#. command line help text for 'set no_packages' option +#: language/src/clients/language.rb:105 msgid "Do not install language specific packages" msgstr "언어 특정 패키지를 설치하지 않음" -#. progress title -#: language/src/clients/language.rb:134 +#. progress title +#: language/src/clients/language.rb:134 msgid "Saving Language Configuration" msgstr "언어 구성 저장" -#. progress stage -#: language/src/clients/language.rb:139 +#. progress stage +#: language/src/clients/language.rb:139 msgid "Save language and console settings" msgstr "언어 및 콘솔 설정 저장" -#. progress stage -#: language/src/clients/language.rb:141 +#. progress stage +#: language/src/clients/language.rb:141 msgid "Install and uninstall affected packages" msgstr "영향을 받는 패키지 설치 및 설치 제거" -#. progress stage -#: language/src/clients/language.rb:143 +#. progress stage +#: language/src/clients/language.rb:143 msgid "Update translations in boot loader menu" msgstr "부트 로더 메뉴의 번역 업데이트" -#. progress step -#: language/src/clients/language.rb:147 +#. progress step +#: language/src/clients/language.rb:147 msgid "Saving language and console settings..." msgstr "언어 및 콘솔 설정 저장 중..." -#. progress step -#: language/src/clients/language.rb:149 +#. progress step +#: language/src/clients/language.rb:149 msgid "Installing and uninstalling affected packages..." msgstr "영향을 받는 패키지 설치 및 설치 제거 중..." -#. progress step -#: language/src/clients/language.rb:151 +#. progress step +#: language/src/clients/language.rb:151 msgid "Updating translations in boot loader menu..." msgstr "부트 로더 메뉴의 번역 업데이트 중..." -#. help for write dialog -#: language/src/clients/language.rb:233 +#. help for write dialog +#: language/src/clients/language.rb:233 msgid "<p><b>Saving Configuration</b><br>Please wait...</p>" msgstr "<p><b>구성 저장 중</b><br>잠시 기다려 주십시오...</p>" -#. summary label -#: language/src/clients/language.rb:252 +#. summary label +#: language/src/clients/language.rb:252 msgid "Current Language: %1 (%2)" msgstr "현재 언어: %1 (%2)" -#. summary label -#. summary label -#: language/src/clients/language.rb:266 language/src/modules/Language.rb:851 -#: language/src/modules/Language.rb:885 +#. summary label +#. summary label +#: language/src/clients/language.rb:266 language/src/modules/Language.rb:851 +#: language/src/modules/Language.rb:885 msgid "Additional Languages: %1" msgstr "추가 언어: %1" -#. error message (%1 is given layout); do not translate 'list' -#: language/src/clients/language.rb:301 -msgid "" -"%1 is not a valid language. Use the list command to see possible values." -msgstr "" -"%1은(는) 유효한 언어가 아닙니다. 가능한 값을 보려면 list 명령을 사용하십시오." +#. error message (%1 is given layout); do not translate 'list' +#: language/src/clients/language.rb:301 +msgid "%1 is not a valid language. Use the list command to see possible values." +msgstr "%1은(는) 유효한 언어가 아닙니다. 가능한 값을 보려면 list 명령을 사용하십시오." -#. label text -#. heading text -#: language/src/clients/language_proposal.rb:131 -#: language/src/clients/select_language.rb:119 +#. label text +#. heading text +#: language/src/clients/language_proposal.rb:131 +#: language/src/clients/select_language.rb:119 msgid "Language" msgstr "언어" -#. ---------------------------------------------------------------------- -#. Build dialog -#. ---------------------------------------------------------------------- -#. heading text -#: language/src/clients/select_language.rb:115 +#. ---------------------------------------------------------------------- +#. Build dialog +#. ---------------------------------------------------------------------- +#. heading text +#: language/src/clients/select_language.rb:115 msgid "Languages" msgstr "언어" -#. heading text -#: language/src/clients/select_language.rb:123 +#. heading text +#: language/src/clients/select_language.rb:123 msgid "Welcome to System Repair" msgstr "시스템 복구 시작" -#. button label -#: language/src/clients/select_language.rb:165 +#. button label +#: language/src/clients/select_language.rb:165 msgid "&Details" msgstr "세부 사항(&D)" -#. multiselection box label -#: language/src/clients/select_language.rb:178 +#. multiselection box label +#: language/src/clients/select_language.rb:178 msgid "&Secondary Languages" msgstr "보조 언어(&S)" -#. combo box label -#: language/src/clients/select_language.rb:189 +#. combo box label +#: language/src/clients/select_language.rb:189 msgid "Primary &Language" msgstr "주 언어(&L)" -#. frame label -#: language/src/clients/select_language.rb:199 +#. frame label +#: language/src/clients/select_language.rb:199 msgid "Primary Language Settings" msgstr "주 언어 설정" -#. help text (language dependent packages) - at the end of help -#: language/src/clients/select_language.rb:231 +#. help text (language dependent packages) - at the end of help +#: language/src/clients/select_language.rb:231 msgid "" "<p>\n" -"Additional packages with support for the selected primary and secondary " -"languages will be installed. Packages no longer needed will be removed.\n" +"Additional packages with support for the selected primary and secondary languages will be installed. Packages no longer needed will be removed.\n" "</p>" msgstr "" "<p>\n" -"선택한 주 언어 및 보조 언어를 지원하는 추가 패키지가 설치됩니다. 필요하지 않" -"은 패키지는 제거됩니다.\n" +"선택한 주 언어 및 보조 언어를 지원하는 추가 패키지가 설치됩니다. 필요하지 않은 패키지는 제거됩니다.\n" " </p>" -#. help text for initial (first time) language screen -#: language/src/clients/select_language.rb:239 +#. help text for initial (first time) language screen +#: language/src/clients/select_language.rb:239 msgid "" "<p>\n" "Choose the <b>Language</b> to use during installation and for\n" @@ -433,8 +416,8 @@ " 선택합니다.\n" " </p>\n" -#. help text, continued -#: language/src/clients/select_language.rb:249 +#. help text, continued +#: language/src/clients/select_language.rb:249 msgid "" "<p>\n" "Click <b>Next</b> to proceed to the next dialog.\n" @@ -444,8 +427,8 @@ "다음 대화 상자로 넘어가려면 <b>다음</b>을 클릭하십시오.\n" " </p>\n" -#. help text, continued -#: language/src/clients/select_language.rb:259 +#. help text, continued +#: language/src/clients/select_language.rb:259 msgid "" "<p>\n" "Nothing will happen to your computer until you confirm\n" @@ -457,8 +440,8 @@ " 컴퓨터에서 아무 것도 변경되지 않습니다.\n" " </p>\n" -#. help text, continued -#: language/src/clients/select_language.rb:270 +#. help text, continued +#: language/src/clients/select_language.rb:270 msgid "" "<p>\n" "You can select <b>Abort</b> at any time to abort the\n" @@ -470,9 +453,9 @@ "설치 프로세스를 중단할 수 있습니다.\n" "</p>\n" -#. different help text when called after installation -#. in an installed system -#: language/src/clients/select_language.rb:281 +#. different help text when called after installation +#. in an installed system +#: language/src/clients/select_language.rb:281 msgid "" "<p>\n" "Choose the new <b>Language</b> for your system.\n" @@ -482,8 +465,8 @@ "시스템에 대한 새로운 <b>언어</b>를 선택합니다.\n" " </p>\n" -#. help text when "multiple languages" are suported 1/2 -#: language/src/clients/select_language.rb:290 +#. help text when "multiple languages" are suported 1/2 +#: language/src/clients/select_language.rb:290 msgid "" "<p>\n" "Choose the new <b>Primary Language</b> for your system.\n" @@ -493,26 +476,21 @@ "시스템에 대한 새로운 <b>주 언어</b>를 선택합니다.\n" " </p>\n" -#. help text for 'adapt keyboard checkbox' -#: language/src/clients/select_language.rb:300 +#. help text for 'adapt keyboard checkbox' +#: language/src/clients/select_language.rb:300 msgid "" "<p>\n" -"Check <b>Adapt Keyboard Layout</b> to change the keyboard layout to the " -"primary language.\n" -"Check <b>Adapt Time Zone</b> to change the current time zone according to " -"the primary language. If the keyboard layout or time zone is already adapted " -"to the default language setting, the respective option is disabled.\n" +"Check <b>Adapt Keyboard Layout</b> to change the keyboard layout to the primary language.\n" +"Check <b>Adapt Time Zone</b> to change the current time zone according to the primary language. If the keyboard layout or time zone is already adapted to the default language setting, the respective option is disabled.\n" "</p>\n" msgstr "" "<p>\n" "키보드 배열을 기본 언어로 변경하려면 <b>키보드 배열 적용</b>을 선택합니다.\n" -"기본 언어에 따라 현재 시간대를 변경하려면 <b>시간대 적용</b>을 선택합니다. 키" -"보드 배열 또는 시간대가 이미 기본 언어 설정으로 사용된 경우 관련 옵션은 선택" -"되지 않습니다.\n" +"기본 언어에 따라 현재 시간대를 변경하려면 <b>시간대 적용</b>을 선택합니다. 키보드 배열 또는 시간대가 이미 기본 언어 설정으로 사용된 경우 관련 옵션은 선택되지 않습니다.\n" "</p>\n" -#. help text when "multiple languages" are suported 2/2 -#: language/src/clients/select_language.rb:312 +#. help text when "multiple languages" are suported 2/2 +#: language/src/clients/select_language.rb:312 msgid "" "<p>\n" "<b>Secondary Languages</b><br>\n" @@ -524,13 +502,13 @@ " 시스템에서 사용할 추가 언어를 선택 상자에서 지정합니다.\n" " </p>\n" -#. error message - package solver failed -#: language/src/clients/select_language.rb:533 +#. error message - package solver failed +#: language/src/clients/select_language.rb:533 msgid "There are unresolved package dependencies." msgstr "해결되지 않은 패키지 종속성이 있습니다." -#. error message -#: language/src/clients/select_language.rb:550 +#. error message +#: language/src/clients/select_language.rb:550 msgid "" "There is not enough space to install all additional packages.\n" "Remove some languages from the selection." @@ -538,8 +516,8 @@ "추가 패키지를 설치하기 위해 필요한 공간이 충분하지 않습니다.\n" "일부 언어에 대한 선택을 취소하십시오." -#. help text for langauge expert screen -#: language/src/clients/select_language.rb:572 +#. help text for langauge expert screen +#: language/src/clients/select_language.rb:572 msgid "" "<p>\n" "Here, fine-tune settings for the language handling.\n" @@ -553,8 +531,8 @@ " 확실하지 않은 경우 이미 선택된 기본값을 사용하십시오.\n" " </p>\n" -#. help text for langauge expert screen -#: language/src/clients/select_language.rb:585 +#. help text for langauge expert screen +#: language/src/clients/select_language.rb:585 msgid "" "<p>\n" "<b>Locale Settings for User root</b>\n" @@ -564,77 +542,69 @@ "<b>사용자 루트에 대한 로케일 설정</b>\n" "루트 사용자에 대한 로케일 변수(LC_*)를 설정하는 방법을 지정합니다.</p>" -#. help text for langauge expert screen -#: language/src/clients/select_language.rb:592 +#. help text for langauge expert screen +#: language/src/clients/select_language.rb:592 msgid "" -"<p><b>ctype Only</b>: root has the same LC_CTYPE as a normal user. Other " -"values\n" +"<p><b>ctype Only</b>: root has the same LC_CTYPE as a normal user. Other values\n" "are unset.<br>\n" "<b>Yes</b>: root has the same locale settings as normal user.<br>\n" "<b>No</b>: root has all locale variables unset.\n" "</p>\n" msgstr "" -"<p><b>ctype만</b>: 루트도 일반 사용자와 같은 LC_CTYPE을 갖습니다. 다른 값들" -"은\n" +"<p><b>ctype만</b>: 루트도 일반 사용자와 같은 LC_CTYPE을 갖습니다. 다른 값들은\n" "설정되지 않습니다.<br>\n" " <b>예</b>: 루트도 일반 사용자와 같은 로케일 설정을 갖습니다.<br>\n" " <b>아니오</b>: 루트의 모든 로케일 변수가 설정되지 않습니다.\n" " </p>\n" -#. help text for langauge expert screen -#: language/src/clients/select_language.rb:601 -msgid "" -"<p>Use <b>Detailed Locale Setting</b> to set a locale for the primary " -"language that is not offered in the list in the main dialog. Translation may " -"not be available for the selected locale.</p>" -msgstr "" -"<p><b>세부 로케일 설정</b>을 사용하면 주 대화 상자 목록에서 제공하지 않는 주 " -"언어에 대한 로케일을 설정할 수 있습니다. 선택한 로케일의 경우 번역을 사용하" -"지 못할 수도 있습니다.</p>" +#. help text for langauge expert screen +#: language/src/clients/select_language.rb:601 +msgid "<p>Use <b>Detailed Locale Setting</b> to set a locale for the primary language that is not offered in the list in the main dialog. Translation may not be available for the selected locale.</p>" +msgstr "<p><b>세부 로케일 설정</b>을 사용하면 주 대화 상자 목록에서 제공하지 않는 주 언어에 대한 로케일을 설정할 수 있습니다. 선택한 로케일의 경우 번역을 사용하지 못할 수도 있습니다.</p>" -#. heading text -#: language/src/clients/select_language.rb:634 +#. heading text +#: language/src/clients/select_language.rb:634 msgid "Language Details" msgstr "언어 정보" -#. combo box label -#: language/src/clients/select_language.rb:640 +#. combo box label +#: language/src/clients/select_language.rb:640 msgid "Locale Settings for User &root" msgstr "사용자 루트에 대한 로케일 설정(&R)" -#. do not translate "ctype" -#: language/src/clients/select_language.rb:643 +#. do not translate "ctype" +#: language/src/clients/select_language.rb:643 msgid "ctype Only" msgstr "ctype만" -#. checkbox label -#: language/src/clients/select_language.rb:654 +#. checkbox label +#: language/src/clients/select_language.rb:654 msgid "Use &UTF-8 Encoding" msgstr "UTF-8 인코딩 사용(&U)" -#. combo box label -#: language/src/clients/select_language.rb:663 +#. combo box label +#: language/src/clients/select_language.rb:663 msgid "&Detailed Locale Setting" msgstr "세부 로케일 설정(&D)" -#. check box label (%1 is keyboard layout name) -#: language/src/clients/select_language.rb:723 +#. check box label (%1 is keyboard layout name) +#: language/src/clients/select_language.rb:723 msgid "Adapt &Keyboard Layout to %1" msgstr "%1로 키보드 배열 적용" -#. check box label (%1 is country name) -#: language/src/clients/select_language.rb:730 +#. check box label (%1 is country name) +#: language/src/clients/select_language.rb:730 msgid "Adapt &Time Zone to %1" msgstr "%1에 시간대 적용(&T)" -#. busy message -#: language/src/modules/Language.rb:375 +#. busy message +#: language/src/modules/Language.rb:375 msgid "Downloading installation system language extension..." msgstr "설치 시스템 확장 언어를 다운로드 중..." -#. TRANSLATORS: Error message. Strings marked %{...} will be replaced -#. with variable content - do not translate them, please. -#: language/src/modules/Language.rb:407 +#. TRANSLATORS: Error message. Strings marked %{...} will be replaced +#. with variable content - do not translate them, please. +#: language/src/modules/Language.rb:407 msgid "" "Language '%{language}' was not found within the list of supported languages\n" "available at %{directory}.\n" @@ -646,21 +616,21 @@ "\n" "대체 언어 %{fallback}이(가) 사용됩니다." -#. summary label -#. summary label -#: language/src/modules/Language.rb:795 language/src/modules/Language.rb:867 +#. summary label +#. summary label +#: language/src/modules/Language.rb:795 language/src/modules/Language.rb:867 msgid "Primary Language: %1" msgstr "주 언어: %1" -#. work-around for following in order not to depend on yast2-packager -#. PackageSlideShow::InitPkgData (false); -#. "value" : PackageSlideShow::total_size_to_install / 1024 , // kilobytes -#: language/src/modules/Language.rb:1040 +#. work-around for following in order not to depend on yast2-packager +#. PackageSlideShow::InitPkgData (false); +#. "value" : PackageSlideShow::total_size_to_install / 1024 , // kilobytes +#: language/src/modules/Language.rb:1040 msgid "Installing Packages..." msgstr "패키지 설치 중..." -#. continue/cancel message -#: language/src/modules/Language.rb:1131 +#. continue/cancel message +#: language/src/modules/Language.rb:1131 msgid "" "Translation of the primary language is not complete.\n" "Some texts may be displayed in English.\n" @@ -668,8 +638,8 @@ "주 언어의 번역 상태가 완전하지 않습니다.\n" "일부 텍스트는 영어로 표시될 수 있습니다.\n" -#. popup message -#: language/src/modules/Language.rb:1345 +#. popup message +#: language/src/modules/Language.rb:1345 msgid "" "Only minimal support for the selected language is included on this media.\n" "Enable online repositories later in order to get the appropriate support\n" @@ -679,79 +649,76 @@ "이 언어에 대한 적합한 지원을 받으려면 추후에 온라인 리포지토리를\n" "설정하십시오.\n" -#. popup message (user selected CJK language in text mode) -#: language/src/modules/Language.rb:1374 +#. popup message (user selected CJK language in text mode) +#: language/src/modules/Language.rb:1374 msgid "" "The selected language cannot be used in text mode. English is used for\n" "installation, but the selected language will be used for the new system." msgstr "" -"선택한 언어는 텍스트 모드에서 사용할 수 없습니다. 설치에는 영어가 사용되지" -"만\n" +"선택한 언어는 텍스트 모드에서 사용할 수 없습니다. 설치에는 영어가 사용되지만\n" "새 시스템에는 선택한 언어가 사용됩니다." -#. translators: command line help text for timezone module -#: timezone/src/clients/timezone.rb:52 +#. translators: command line help text for timezone module +#: timezone/src/clients/timezone.rb:52 msgid "Time zone configuration" msgstr "시간대 구성" -#. command line help text for 'summary' action -#: timezone/src/clients/timezone.rb:65 +#. command line help text for 'summary' action +#: timezone/src/clients/timezone.rb:65 msgid "Time zone configuration summary" msgstr "시간대 구성 요약" -#. command line help text for 'set' action -#: timezone/src/clients/timezone.rb:72 +#. command line help text for 'set' action +#: timezone/src/clients/timezone.rb:72 msgid "Set new values for time zone configuration" msgstr "시간대 구성에 대해 새 값을 설정합니다." -#. command line help text for 'list' action -#: timezone/src/clients/timezone.rb:79 +#. command line help text for 'list' action +#: timezone/src/clients/timezone.rb:79 msgid "List all available time zones" msgstr "사용 가능한 모든 시간대를 열거합니다." -#. command line help text for 'set timezone' option -#: timezone/src/clients/timezone.rb:87 +#. command line help text for 'set timezone' option +#: timezone/src/clients/timezone.rb:87 msgid "New time zone" msgstr "새 시간대" -#. command line help text for 'set hwclock' option -#: timezone/src/clients/timezone.rb:94 +#. command line help text for 'set hwclock' option +#: timezone/src/clients/timezone.rb:94 msgid "New value for hardware clock. Can be 'local', 'utc' or 'UTC'." -msgstr "" -"하드웨어 시계에 대한 새로운 값으로 'local', 'utc' 또는 'UTC'가 될 수 있습니" -"다." +msgstr "하드웨어 시계에 대한 새로운 값으로 'local', 'utc' 또는 'UTC'가 될 수 있습니다." -#. summary label -#: timezone/src/clients/timezone.rb:174 +#. summary label +#: timezone/src/clients/timezone.rb:174 msgid "Current Time Zone:\t%1" msgstr "현재 시간대:\t%1" -#. summary label -#: timezone/src/clients/timezone.rb:181 +#. summary label +#: timezone/src/clients/timezone.rb:181 msgid "Hardware Clock Set To:\t%1" msgstr "하드웨어 시계 설정 기준:\t%1" -#. summary text (Clock setting) -#. label text (Clock setting) -#. AutoYaST interface function: Return the summary of Timezone configuration as a map. -#. @return summary string (html) -#: timezone/src/clients/timezone.rb:184 timezone/src/modules/Timezone.rb:749 -#: timezone/src/modules/Timezone.rb:985 +#. summary text (Clock setting) +#. label text (Clock setting) +#. AutoYaST interface function: Return the summary of Timezone configuration as a map. +#. @return summary string (html) +#: timezone/src/clients/timezone.rb:184 timezone/src/modules/Timezone.rb:749 +#: timezone/src/modules/Timezone.rb:985 msgid "UTC" msgstr "UTC" -#. summary text (Clock setting) -#: timezone/src/clients/timezone.rb:186 +#. summary text (Clock setting) +#: timezone/src/clients/timezone.rb:186 msgid "Local time" msgstr "지역 시간" -#. summary label -#: timezone/src/clients/timezone.rb:193 +#. summary label +#: timezone/src/clients/timezone.rb:193 msgid "Current Time and Date:\t%1" msgstr "현재 시간 및 날짜:\t%1" -#. error text, %1 is output of 'date' command -#: timezone/src/clients/timezone_proposal.rb:39 +#. error text, %1 is output of 'date' command +#: timezone/src/clients/timezone_proposal.rb:39 msgid "" "Time %1 is in the past.\n" "Set a correct time before starting installation." @@ -759,36 +726,32 @@ "%1 시간은 과거입니다.\n" "설치를 시작하기 전에 정확한 시간을 설정하십시오." -#. summary item -#: timezone/src/clients/timezone_proposal.rb:85 +#. summary item +#: timezone/src/clients/timezone_proposal.rb:85 msgid "Time Zone" msgstr "시간대" -#. menue label text -#: timezone/src/clients/timezone_proposal.rb:87 +#. menue label text +#: timezone/src/clients/timezone_proposal.rb:87 msgid "&Time Zone" msgstr "시간대(&T)" -#. help for time calculation basis: -#. hardware clock references local time or UTC? -#: timezone/src/include/timezone/dialogs.rb:105 +#. help for time calculation basis: +#. hardware clock references local time or UTC? +#: timezone/src/include/timezone/dialogs.rb:105 msgid "" "<p>\n" -"Specify whether your machine is set to local time or UTC in <b>Hardware " -"Clock Set To</b>.\n" -"Most PCs that also have other operating systems installed (such as " -"Microsoft\n" +"Specify whether your machine is set to local time or UTC in <b>Hardware Clock Set To</b>.\n" +"Most PCs that also have other operating systems installed (such as Microsoft\n" "Windows) use local time.\n" "Machines that have only Linux installed are usually\n" "set to Universal Time Coordinated (UTC).\n" -"If the hardware clock is set to UTC, your system can switch from standard " -"time\n" +"If the hardware clock is set to UTC, your system can switch from standard time\n" "to daylight saving time and back automatically.\n" "</p>\n" msgstr "" "<p>\n" -"<b>하드웨어 시계 설정 기준</b>에서 시스템 설정 시간이 지역 시간인지 UTC인지 " -"지정합니다.\n" +"<b>하드웨어 시계 설정 기준</b>에서 시스템 설정 시간이 지역 시간인지 UTC인지 지정합니다.\n" " Microsoft Windows와 같은 다른 운영 체제가 설치된 대부분의 PC는\n" " 지역 시간을 사용합니다.\n" " Linux만 설치된 컴퓨터는 보통\n" @@ -797,8 +760,8 @@ "일광절약 시간제로 전환하거나 그 반대로 전환할 수 있습니다.\n" " </p>\n" -#. help text: extra note about localtime -#: timezone/src/include/timezone/dialogs.rb:118 +#. help text: extra note about localtime +#: timezone/src/include/timezone/dialogs.rb:118 msgid "" "<p>\n" "Note: The internal system clock as used by the Linux kernel must\n" @@ -814,18 +777,15 @@ "부작용에 대한 배경 정보는 사용자 매뉴얼을 확인하십시오.\n" "</p>" -#. warning popup, in case local time is selected (bnc#732769) -#: timezone/src/include/timezone/dialogs.rb:131 +#. warning popup, in case local time is selected (bnc#732769) +#: timezone/src/include/timezone/dialogs.rb:131 msgid "" "\n" -"You selected local time, but only Linux seems to be installed on your " -"system.\n" +"You selected local time, but only Linux seems to be installed on your system.\n" "In such case, it is strongly recommended to use UTC, and to click Cancel.\n" "\n" -"If you want to keep local time, you must adjust the CMOS clock twice the " -"year\n" -"because of Day Light Saving switches. If you miss to adjust the clock, " -"backups may fail,\n" +"If you want to keep local time, you must adjust the CMOS clock twice the year\n" +"because of Day Light Saving switches. If you miss to adjust the clock, backups may fail,\n" "your mail system may drop mail messages, etc.\n" "\n" "If you use UTC, Linux will adjust the time automatically.\n" @@ -837,70 +797,65 @@ "이 경우 UTC를 사용하고 [취소]를 클릭하는 것이 좋습니다.\n" "\n" "로컬 시간을 유지하려는 경우 일광 절약 시간 전환 때문에\n" -"1년에 두 번 CMOS 클럭을 조정해야 합니다. 클럭을 조정하지 않으면 백업이 실패하" -"거나\n" +"1년에 두 번 CMOS 클럭을 조정해야 합니다. 클럭을 조정하지 않으면 백업이 실패하거나\n" "메일 시스템에서 메일 메시지가 삭제될 수 있습니다.\n" "\n" "UTC를 사용하는 경우 Linux에서 자동으로 시간을 조정합니다.\n" "\n" "선택(로컬 시간)을 계속하시겠습니까?" -#. help text for set time dialog -#: timezone/src/include/timezone/dialogs.rb:187 -msgid "" -"<p>The current system time and date are displayed. If required, change them " -"to the correct values manually or use Network Time Protocol (NTP).</p>" -msgstr "" -"<p>현재 시스템 시간 및 날짜가 표시됩니다. 필요한 경우 수동으로 올바른 값으로 " -"변경하거나 NTP(Network Time Protocol)를 사용하십시오.</p>" +#. help text for set time dialog +#: timezone/src/include/timezone/dialogs.rb:187 +msgid "<p>The current system time and date are displayed. If required, change them to the correct values manually or use Network Time Protocol (NTP).</p>" +msgstr "<p>현재 시스템 시간 및 날짜가 표시됩니다. 필요한 경우 수동으로 올바른 값으로 변경하거나 NTP(Network Time Protocol)를 사용하십시오.</p>" -#. help text, cont. -#: timezone/src/include/timezone/dialogs.rb:191 +#. help text, cont. +#: timezone/src/include/timezone/dialogs.rb:191 msgid "<p>Press <b>Accept</b> to save your changes.</p>" msgstr "<p><b>적용</b>을 눌러 변경사항을 저장하십시오.</p>" -#. label text, do not change "DD-MM-YYYY" -#: timezone/src/include/timezone/dialogs.rb:262 +#. label text, do not change "DD-MM-YYYY" +#: timezone/src/include/timezone/dialogs.rb:262 msgid "Current Date in DD-MM-YYYY Format" msgstr "현재 날짜의 표시형식은 DD-MM-YYYY 입니다." -#. label text, do not change "HH:MM:SS" -#: timezone/src/include/timezone/dialogs.rb:278 +#. label text, do not change "HH:MM:SS" +#: timezone/src/include/timezone/dialogs.rb:278 msgid "Current Time in HH:MM:SS Format" msgstr "현재 시간의 표시형식은 HH:MM:SS 입니다." -#. label text -#: timezone/src/include/timezone/dialogs.rb:293 +#. label text +#: timezone/src/include/timezone/dialogs.rb:293 msgid "Current Date" msgstr "현재 날짜" -#. label text -#: timezone/src/include/timezone/dialogs.rb:297 +#. label text +#: timezone/src/include/timezone/dialogs.rb:297 msgid "Current Time" msgstr "현재 시간" -#. radio button label (= how to setup time) -#: timezone/src/include/timezone/dialogs.rb:312 +#. radio button label (= how to setup time) +#: timezone/src/include/timezone/dialogs.rb:312 msgid "Manually" msgstr "수동" -#. check box label -#: timezone/src/include/timezone/dialogs.rb:328 +#. check box label +#: timezone/src/include/timezone/dialogs.rb:328 msgid "Change the Time Now" msgstr "현재 시각 변경" -#. radio button label -#: timezone/src/include/timezone/dialogs.rb:341 +#. radio button label +#: timezone/src/include/timezone/dialogs.rb:341 msgid "Synchronize with NTP Server" msgstr "NTP 서버와 동기화" -#. TODO replace help text after ntp_installed, is. -#: timezone/src/include/timezone/dialogs.rb:356 +#. TODO replace help text after ntp_installed, is. +#: timezone/src/include/timezone/dialogs.rb:356 msgid "Change Date and Time" msgstr "날짜 및 시간 변경" -#. popup text, %1 is entered value -#: timezone/src/include/timezone/dialogs.rb:466 +#. popup text, %1 is entered value +#: timezone/src/include/timezone/dialogs.rb:466 msgid "" "Invalid time (HH:MM:SS) %1.\n" "Enter the correct time.\n" @@ -908,8 +863,8 @@ "%1의 시간(HH:MM:SS)이 잘못되었습니다\n" "정확한 시간을 입력하십시오.\n" -#. popup text, %1 is entered value -#: timezone/src/include/timezone/dialogs.rb:475 +#. popup text, %1 is entered value +#: timezone/src/include/timezone/dialogs.rb:475 msgid "" "Invalid date (DD-MM-YYYY) %1.\n" "Enter the correct date.\n" @@ -917,49 +872,49 @@ "%1의 날짜(DD-MM-YYYY)가 잘못되었습니다\n" "정확한 날짜를 입력하십시오.\n" -#. TRANSLATORS: Button label -#: timezone/src/include/timezone/dialogs.rb:535 +#. TRANSLATORS: Button label +#: timezone/src/include/timezone/dialogs.rb:535 msgid "Other &Settings..." msgstr "기타 설정(&S)..." -#. frame label -#. frame label -#: timezone/src/include/timezone/dialogs.rb:612 -#: timezone/src/include/timezone/dialogs.rb:916 +#. frame label +#. frame label +#: timezone/src/include/timezone/dialogs.rb:612 +#: timezone/src/include/timezone/dialogs.rb:916 msgid "Date and Time (NTP is configured)" msgstr "날짜 및 시간(NTP가 구성됨)" -#. frame label -#. frame label -#: timezone/src/include/timezone/dialogs.rb:614 -#: timezone/src/include/timezone/dialogs.rb:699 -#: timezone/src/include/timezone/dialogs.rb:918 +#. frame label +#. frame label +#: timezone/src/include/timezone/dialogs.rb:614 +#: timezone/src/include/timezone/dialogs.rb:699 +#: timezone/src/include/timezone/dialogs.rb:918 msgid "Date and Time" msgstr "날짜 및 시간" -#. check box label -#: timezone/src/include/timezone/dialogs.rb:630 +#. check box label +#: timezone/src/include/timezone/dialogs.rb:630 msgid "&Hardware Clock Set to UTC" msgstr "UTC로 설정된 하드웨어 클럭(&H)" -#. label text -#. label text -#: timezone/src/include/timezone/dialogs.rb:656 -#: timezone/src/include/timezone/dialogs.rb:690 +#. label text +#. label text +#: timezone/src/include/timezone/dialogs.rb:656 +#: timezone/src/include/timezone/dialogs.rb:690 msgid "&Region" msgstr "지역(&E)" -#: timezone/src/include/timezone/dialogs.rb:663 -#: timezone/src/include/timezone/dialogs.rb:694 +#: timezone/src/include/timezone/dialogs.rb:663 +#: timezone/src/include/timezone/dialogs.rb:694 msgid "Time &Zone" msgstr "시간대(&Z)" -#: timezone/src/include/timezone/dialogs.rb:675 +#: timezone/src/include/timezone/dialogs.rb:675 msgid "Date and Time:" msgstr "날짜 및 시간:" -#. help for timezone screen -#: timezone/src/include/timezone/dialogs.rb:797 +#. help for timezone screen +#: timezone/src/include/timezone/dialogs.rb:797 msgid "" "\n" "<p><b><big>Time Zone and Clock Settings</big></b></p>" @@ -967,12 +922,11 @@ "\n" "<p><b><big>시간대 및 시계 설정</big></b></p>" -#. help for timezone screen -#: timezone/src/include/timezone/dialogs.rb:799 +#. help for timezone screen +#: timezone/src/include/timezone/dialogs.rb:799 msgid "" "<p>\n" -"To select the time zone to use in your system, first select the <b>Region.\n" +"To select the time zone to use in your system, first select the <b>Region</b>.\n" "In <b>Time Zone</b>, then select the appropriate time zone, country, or \n" "region from those available.\n" "</p>\n" @@ -983,8 +937,8 @@ "선택합니다.\n" " </p>\n" -#. general help trailer -#: timezone/src/include/timezone/dialogs.rb:816 +#. general help trailer +#: timezone/src/include/timezone/dialogs.rb:816 msgid "" "<p>\n" "If the current time is not correct, use <b>Change</b> to adjust it.\n" @@ -994,327 +948,327 @@ "현재 시간이 정확하지 않으면 <b>변경</b>을 사용하여 조정할 수 있습니다.\n" " </p>" -#. Screen title for timezone screen -#: timezone/src/include/timezone/dialogs.rb:826 +#. Screen title for timezone screen +#: timezone/src/include/timezone/dialogs.rb:826 msgid "Clock and Time Zone" msgstr "시계 및 시간대" -#. popup text -#: timezone/src/include/timezone/dialogs.rb:951 +#. popup text +#: timezone/src/include/timezone/dialogs.rb:951 msgid "Select a valid time zone." msgstr "유효한 시간대를 선택하십시오." -#. label text, Clock setting: local time (not UTC) -#. label text, Clock setting: local time (not UTC) -#: timezone/src/modules/Timezone.rb:753 timezone/src/modules/Timezone.rb:989 +#. label text, Clock setting: local time (not UTC) +#. label text, Clock setting: local time (not UTC) +#: timezone/src/modules/Timezone.rb:753 timezone/src/modules/Timezone.rb:989 msgid "Local Time" msgstr "지역 시간" -#. label text -#. label text -#: timezone/src/modules/Timezone.rb:757 timezone/src/modules/Timezone.rb:993 +#. label text +#. label text +#: timezone/src/modules/Timezone.rb:757 timezone/src/modules/Timezone.rb:993 msgid "Hardware Clock Set To" msgstr "하드웨어 시계 설정 기준" -#. summary label -#: timezone/src/modules/Timezone.rb:771 +#. summary label +#: timezone/src/modules/Timezone.rb:771 msgid "NTP configured" msgstr "NTP 구성됨" -#. summary label -#: timezone/src/modules/Timezone.rb:997 +#. summary label +#: timezone/src/modules/Timezone.rb:997 msgid "Current Time Zone: %1" msgstr "현재 시간대: %1" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:46 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:46 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:46 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:46 msgid "English (US)" msgstr "영어 (US)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:58 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:58 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:58 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:58 msgid "English (UK)" msgstr "영어 (UK)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:70 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:70 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:70 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:70 msgid "German" msgstr "독일어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:82 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:82 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:82 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:82 msgid "German (with deadkeys)" msgstr "독일어 (with deadkeys)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:94 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:94 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:94 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:94 msgid "German (Switzerland)" msgstr "독일어(스위스)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:106 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:106 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:106 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:106 msgid "French" msgstr "프랑스어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:118 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:118 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:118 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:118 msgid "French (Switzerland)" msgstr "프랑스어 (스위스)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:130 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:130 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:130 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:130 msgid "French (Canada)" msgstr "프랑스어(캐나다)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:143 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:143 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:143 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:143 msgid "Canadian (Multilingual)" msgstr "캐나다(다국어)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:157 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:156 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:157 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:156 msgid "Spanish" msgstr "스페인어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:169 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:168 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:169 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:168 msgid "Spanish (Latin America)" msgstr "스페인어 (라틴 아메리카)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:181 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:180 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:181 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:180 msgid "Spanish (CP 850)" msgstr "스페인어 (CP 850)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:193 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:204 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:193 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:204 msgid "Italian" msgstr "이태리어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:205 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:216 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:205 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:216 msgid "Portuguese" msgstr "포르투갈어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:217 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:228 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:217 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:228 msgid "Portuguese (Brazil)" msgstr "포르투갈어 (브라질)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:229 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:240 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:229 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:240 msgid "Portuguese (Brazil -- US accents)" msgstr "포르투갈어 (브라질 - US accents)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:241 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:252 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:241 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:252 msgid "Greek" msgstr "그리스어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:253 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:264 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:253 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:264 msgid "Dutch" msgstr "화란어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:265 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:276 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:265 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:276 msgid "Danish" msgstr "덴마크어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:277 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:288 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:277 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:288 msgid "Norwegian" msgstr "노르웨이어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:289 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:300 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:289 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:300 msgid "Swedish" msgstr "스웨덴어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:301 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:312 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:301 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:312 msgid "Finnish" msgstr "핀란드어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:313 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:324 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:313 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:324 msgid "Czech" msgstr "체코어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:328 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:336 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:328 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:336 msgid "Czech (qwerty)" msgstr "체코어 (qwerty)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:343 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:348 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:343 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:348 msgid "Slovak" msgstr "슬로바키아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:358 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:360 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:358 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:360 msgid "Slovak (qwerty)" msgstr "슬로바키아어 (qwerty)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:373 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:372 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:373 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:372 msgid "Slovene" msgstr "슬로바니아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:388 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:384 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:388 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:384 msgid "Hungarian" msgstr "헝가리어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:403 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:396 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:403 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:396 msgid "Polish" msgstr "폴란드어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:418 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:408 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:418 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:408 msgid "Russian" msgstr "러시아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:432 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:420 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:432 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:420 msgid "Serbian" msgstr "세르비아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:444 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:432 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:444 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:432 msgid "Estonian" msgstr "에스토니아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:456 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:444 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:456 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:444 msgid "Lithuanian" msgstr "리투아니아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:468 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:456 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:468 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:456 msgid "Turkish" msgstr "터어키어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:479 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:467 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:479 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:467 msgid "Croatian" msgstr "크로아티아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:502 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:479 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:502 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:479 msgid "Japanese" msgstr "일본어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:514 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:491 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:514 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:491 msgid "Belgian" msgstr "벨기에어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:526 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:503 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:526 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:503 msgid "Dvorak" msgstr "드보락" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:538 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:515 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:538 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:515 msgid "Icelandic" msgstr "아이슬란드어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:550 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:527 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:550 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:527 msgid "Ukrainian" msgstr "우크라이나어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:572 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:539 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:572 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:539 msgid "Khmer" msgstr "크메르어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:594 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:551 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:594 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:551 msgid "Korean" msgstr "한국어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:616 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:563 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:616 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:563 msgid "Arabic" msgstr "아랍어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:637 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:574 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:637 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:574 msgid "Tajik" msgstr "타지크어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:651 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:586 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:651 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:586 msgid "Traditional Chinese" msgstr "중국어(번체)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:673 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:598 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:673 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:598 msgid "Simplified Chinese" msgstr "중국어(간체)" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:695 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:610 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:695 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:610 msgid "Romanian" msgstr "루마니아어" -#. keyboard layout -#: keyboard/src/data/keyboard_raw.ycp:716 -#: keyboard/src/data/keyboard_raw_opensuse.ycp:621 +#. keyboard layout +#: keyboard/src/data/keyboard_raw.ycp:716 +#: keyboard/src/data/keyboard_raw_opensuse.ycp:621 msgid "US International" msgstr "미국 국제" -#. keyboard layout -#: keyboard/src/data/keyboard_raw_opensuse.ycp:192 +#. keyboard layout +#: keyboard/src/data/keyboard_raw_opensuse.ycp:192 msgid "Spanish (Asturian variant)" msgstr "스페인어(아스투리아어 변형)" Modified: branches/SLE12-SP3/yast/ko/po/dhcp-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/dhcp-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/dhcp-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,682 +14,681 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. command line help text for DHCP server module -#: src/include/dhcp-server/commandline.rb:25 +#. command line help text for DHCP server module +#: src/include/dhcp-server/commandline.rb:25 msgid "DHCP server configuration module" msgstr "DHCP 서버 구성 모듈" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:35 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:35 msgid "Print the status of the DHCP server" msgstr "DHCP 서버의 상태 인쇄" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:42 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:42 msgid "Enable the DHCP server" msgstr "DHCP 서버 활성화" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:49 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:49 msgid "Disable the DHCP server" msgstr "DHCP 서버 비활성화" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:56 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:56 msgid "Manage individual host settings" msgstr "개별 호스트 설정 관리" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:63 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:63 msgid "Select the network interface to listen to" msgstr "수신 대기할 네트워크 인터페이스 선택" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:70 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:70 msgid "Manage global DHCP options" msgstr "전역 DHCP 옵션 관리" -#. command line help text for an action -#: src/include/dhcp-server/commandline.rb:77 +#. command line help text for an action +#: src/include/dhcp-server/commandline.rb:77 msgid "Manage DHCP subnet options" msgstr "DHCP 서브넷 옵션 관리" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:85 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:85 msgid "List all defined hosts with a fixed address" msgstr "고정 주소를 갖는 모든 정의된 호스트 열거" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:91 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:91 msgid "Add a new host with a fixed address" msgstr "고정 주소를 갖는 새 호스트 추가" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:97 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:97 msgid "Edit a host with a fixed address" msgstr "고정 주소를 갖는 호스트 편집" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:103 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:103 msgid "Delete a host with a fixed address" msgstr "고정 주소를 갖는 호스트 삭제" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:109 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:109 msgid "The name of the host with a fixed address" msgstr "고정 주소를 갖는 호스트의 이름" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:116 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:116 msgid "The hardware address of the host with a fixed address" msgstr "고정 주소를 갖는 호스트의 하드웨어 주소" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:123 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:123 msgid "The hardware type of the host with a fixed address" msgstr "고정 주소를 갖는 호스트의 하드웨어 유형" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:131 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:131 msgid "The IP address (or hostname) of the host with a fixed address" msgstr "고정 주소를 갖는 호스트의 IP 주소(또는 호스트 이름)" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:138 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:138 msgid "Select the network interface to use" msgstr "사용할 네트워크 인터페이스 선택" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:145 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:145 msgid "Print the currently used interface and list other available interfaces" msgstr "현재 사용 중인 인터페이스 인쇄 및 기타 사용 가능한 인터페이스 열거" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:151 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:151 msgid "Print current options" msgstr "현재 옵션 인쇄" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:157 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:157 msgid "Set a global option" msgstr "전역 옵션 선택" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:163 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:163 msgid "Option key (for example, ntp-servers)" msgstr "옵션 키(예: ntp-servers)" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:170 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:170 msgid "Option value (for example, IP address)" msgstr "옵션 값(예: IP 주소)" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:177 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:177 msgid "Lowest IP address of the dynamic address assigning range" msgstr "범위를 할당하는 동적 주소의 최하위 IP 주소" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:184 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:184 msgid "Highest IP address of the dynamic address assigning range" msgstr "범위를 할당하는 동적 주소의 최상위 IP 주소" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:191 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:191 msgid "Default lease time in seconds" msgstr "초 단위 기본 임대 시간" -#. command line help text for an option -#: src/include/dhcp-server/commandline.rb:198 +#. command line help text for an option +#: src/include/dhcp-server/commandline.rb:198 msgid "Maximum lease time in seconds" msgstr "초 단위 최대 임대 시간" -#. status information for command line -#: src/include/dhcp-server/commandline.rb:239 +#. status information for command line +#: src/include/dhcp-server/commandline.rb:239 msgid "DHCP server is enabled" msgstr "DHCP 서버가 활성화되었습니다." -#. status information for command line -#: src/include/dhcp-server/commandline.rb:241 +#. status information for command line +#: src/include/dhcp-server/commandline.rb:241 msgid "DHCP server is disabled" msgstr "DHCP 서버가 비활성화되었습니다." -#. command-line text output, %1 is host name -#: src/include/dhcp-server/commandline.rb:294 +#. command-line text output, %1 is host name +#: src/include/dhcp-server/commandline.rb:294 msgid "Host: %1" msgstr "호스트: %1" -#. command-line text output, %1 is hardwarre address -#. and hardware type (eg. "ethernet 11:22:33:44:55:66") -#: src/include/dhcp-server/commandline.rb:300 +#. command-line text output, %1 is hardwarre address +#. and hardware type (eg. "ethernet 11:22:33:44:55:66") +#: src/include/dhcp-server/commandline.rb:300 msgid "Hardware: %1" msgstr "하드웨어: %1" -#. command-line text output, %1 is IP address -#: src/include/dhcp-server/commandline.rb:306 +#. command-line text output, %1 is IP address +#: src/include/dhcp-server/commandline.rb:306 msgid "IP Address: %1" msgstr "IP 주소: %1" -#. command-line error report -#: src/include/dhcp-server/commandline.rb:321 +#. command-line error report +#: src/include/dhcp-server/commandline.rb:321 msgid "Hostname not specified." msgstr "호스트 이름을 지정하지 않았습니다." -#. command-line error report -#: src/include/dhcp-server/commandline.rb:331 +#. command-line error report +#: src/include/dhcp-server/commandline.rb:331 msgid "Specified host does not exist." msgstr "지정한 호스트가 존재하지 않습니다." -#. to be eventually pasted to "Selected interfaces: %1" -#. to be eventually pasted to "Other interfaces: %1" -#: src/include/dhcp-server/commandline.rb:392 -#: src/include/dhcp-server/commandline.rb:396 +#. to be eventually pasted to "Selected interfaces: %1" +#. to be eventually pasted to "Other interfaces: %1" +#: src/include/dhcp-server/commandline.rb:392 +#: src/include/dhcp-server/commandline.rb:396 msgid "None" msgstr "없음" -#. command-line text output, %1 is list of network interfaces -#: src/include/dhcp-server/commandline.rb:400 +#. command-line text output, %1 is list of network interfaces +#: src/include/dhcp-server/commandline.rb:400 msgid "Selected Interfaces: %1" msgstr "선택한 인터페이스: %1" -#. command-line text output, %1 is list of network interfaces -#: src/include/dhcp-server/commandline.rb:403 +#. command-line text output, %1 is list of network interfaces +#: src/include/dhcp-server/commandline.rb:403 msgid "Other Interfaces: %1" msgstr "기타 인터페이스: %1" -#. command-line error report -#: src/include/dhcp-server/commandline.rb:411 +#. command-line error report +#: src/include/dhcp-server/commandline.rb:411 msgid "Specified interface does not exist." msgstr "지정한 인터페이스가 존재하지 않습니다." -#. command-line error report -#: src/include/dhcp-server/commandline.rb:420 +#. command-line error report +#: src/include/dhcp-server/commandline.rb:420 msgid "Operation with the interface not specified." msgstr "인터페이스를 이용한 작업을 지정하지 않았습니다." -#. command-line error report -#: src/include/dhcp-server/commandline.rb:446 +#. command-line error report +#: src/include/dhcp-server/commandline.rb:446 msgid "Option key must be set." msgstr "옵션 키를 설정해야 합니다." -#. command-line error report -#: src/include/dhcp-server/commandline.rb:451 +#. command-line error report +#: src/include/dhcp-server/commandline.rb:451 msgid "Value must be set." msgstr "값을 설정해야 합니다." -#. command-line output text, %1 and %1 are IP addresses -#: src/include/dhcp-server/commandline.rb:495 +#. command-line output text, %1 and %1 are IP addresses +#: src/include/dhcp-server/commandline.rb:495 msgid "Address Range: %1-%2" msgstr "주소 범위: %1-%2" -#. command-line output text, %1 is integer -#: src/include/dhcp-server/commandline.rb:504 +#. command-line output text, %1 is integer +#: src/include/dhcp-server/commandline.rb:504 msgid "Default Lease Time: %1" msgstr "기본 임대 시간: %1" -#. command-line output text, %1 is integer -#: src/include/dhcp-server/commandline.rb:512 +#. command-line output text, %1 is integer +#: src/include/dhcp-server/commandline.rb:512 msgid "Maximum Lease Time: %1" msgstr "최대 임대 시간: %1" -#. yes-no popup -#: src/include/dhcp-server/dialogs.rb:62 +#. yes-no popup +#: src/include/dhcp-server/dialogs.rb:62 msgid "Saving the configuration failed. Change the settings?" msgstr "구성을 저장하지 못했습니다. 설정을 변경하시겠습니까?" -#. Restart only if it's already running -#: src/include/dhcp-server/dialogs.rb:81 +#. Restart only if it's already running +#: src/include/dhcp-server/dialogs.rb:81 msgid "Saving the configuration failed" msgstr "구성 저장 실패" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:123 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:123 msgid "DHCP Server Configuration" msgstr "DHCP 서버 설정" -#. dialog caption -#. Initialize the widget -#. @param [String] id any widget id -#: src/include/dhcp-server/dialogs.rb:155 -#: src/include/dhcp-server/widgets.rb:477 +#. dialog caption +#. Initialize the widget +#. @param [String] id any widget id +#: src/include/dhcp-server/dialogs.rb:155 +#: src/include/dhcp-server/widgets.rb:477 msgid "Global Options" msgstr "전역 옵션" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:190 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:190 msgid "Subnet Configuration" msgstr "서브넷 설정" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:224 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:224 msgid "Host with Fixed Address" msgstr "고정 주소를 갖는 호스트" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:261 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:261 msgid "Shared Network" msgstr "공유 네트워크" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:295 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:295 msgid "Pool of Addresses" msgstr "주소 풀" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:329 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:329 msgid "Group-Specific Options" msgstr "그룹 전용 옵션" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:363 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:363 msgid "Class" msgstr "클래스" -#. radio button -#: src/include/dhcp-server/dialogs.rb:411 +#. radio button +#: src/include/dhcp-server/dialogs.rb:411 msgid "&Subnet" msgstr "서브넷(&S)" -#. radio button -#: src/include/dhcp-server/dialogs.rb:413 +#. radio button +#: src/include/dhcp-server/dialogs.rb:413 msgid "&Host" msgstr "호스트" -#. radio button -#: src/include/dhcp-server/dialogs.rb:415 +#. radio button +#: src/include/dhcp-server/dialogs.rb:415 msgid "Shared &Network" msgstr "공유 네트워크(&N)" -#. radio button -#: src/include/dhcp-server/dialogs.rb:417 +#. radio button +#: src/include/dhcp-server/dialogs.rb:417 msgid "&Group" msgstr "그룹(&G)" -#. radio button -#: src/include/dhcp-server/dialogs.rb:419 +#. radio button +#: src/include/dhcp-server/dialogs.rb:419 msgid "&Pool of Addresses" msgstr "주소 풀(&P)" -#. radio button -#: src/include/dhcp-server/dialogs.rb:421 +#. radio button +#: src/include/dhcp-server/dialogs.rb:421 msgid "&Class" msgstr "클래스(&C)" -#. frame -#: src/include/dhcp-server/dialogs.rb:436 +#. frame +#: src/include/dhcp-server/dialogs.rb:436 msgid "Declaration Types" msgstr "선언 형식" -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:444 +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:444 msgid "Declaration Type" msgstr "선언 형식" -#. dialog caption -#. dialog caption -#: src/include/dhcp-server/dialogs.rb:490 -#: src/include/dhcp-server/dialogs.rb:530 +#. dialog caption +#. dialog caption +#: src/include/dhcp-server/dialogs.rb:490 +#: src/include/dhcp-server/dialogs.rb:530 msgid "Interface Configuration" msgstr "인터페이스 구성" -#. dialog caption -#. item of a menu button -#: src/include/dhcp-server/dialogs.rb:559 -#: src/include/dhcp-server/widgets.rb:1100 +#. dialog caption +#. item of a menu button +#: src/include/dhcp-server/dialogs.rb:559 +#: src/include/dhcp-server/widgets.rb:1100 msgid "TSIG Key Management" msgstr "TSIG 키 관리" -#. combo box item -#: src/include/dhcp-server/dialogs2.rb:47 +#. combo box item +#: src/include/dhcp-server/dialogs2.rb:47 msgid "Days" msgstr "일" -#. combo box item -#: src/include/dhcp-server/dialogs2.rb:49 +#. combo box item +#: src/include/dhcp-server/dialogs2.rb:49 msgid "Hours" msgstr "시간" -#. combo box item -#: src/include/dhcp-server/dialogs2.rb:51 +#. combo box item +#: src/include/dhcp-server/dialogs2.rb:51 msgid "Minutes" msgstr "분" -#. combo box item -#: src/include/dhcp-server/dialogs2.rb:53 +#. combo box item +#: src/include/dhcp-server/dialogs2.rb:53 msgid "Seconds" msgstr "초" -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:94 +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:94 msgid "DHCP Server: Start-Up" msgstr "DHCP 서버: 시작" -#. dialog caption -#. tree item -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:96 -#: src/include/dhcp-server/dialogs2.rb:98 -#: src/include/dhcp-server/dialogs2.rb:182 +#. dialog caption +#. tree item +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:96 +#: src/include/dhcp-server/dialogs2.rb:98 +#: src/include/dhcp-server/dialogs2.rb:182 msgid "Start-Up" msgstr "시작" -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:116 +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:116 msgid "DHCP Server: Card Selection" msgstr "DHCP 서버: 카드 선택" -#. dialog caption -#. tree item -#: src/include/dhcp-server/dialogs2.rb:118 -#: src/include/dhcp-server/dialogs2.rb:120 +#. dialog caption +#. tree item +#: src/include/dhcp-server/dialogs2.rb:118 +#: src/include/dhcp-server/dialogs2.rb:120 msgid "Card Selection" msgstr "카드 선택" -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:130 +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:130 msgid "DHCP Server: Global Settings" msgstr "DHCP 서버: 전역 설정" -#. dialog caption -#. tree item -#: src/include/dhcp-server/dialogs2.rb:134 -#: src/include/dhcp-server/dialogs2.rb:136 +#. dialog caption +#. tree item +#: src/include/dhcp-server/dialogs2.rb:134 +#: src/include/dhcp-server/dialogs2.rb:136 msgid "Global Settings" msgstr "전역 설정" -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:142 +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:142 msgid "DHCP Server: Dynamic DHCP" msgstr "DHCP 서버: 동적 DHCP" -#. dialog caption -#. tree item -#: src/include/dhcp-server/dialogs2.rb:144 -#: src/include/dhcp-server/dialogs2.rb:146 +#. dialog caption +#. tree item +#: src/include/dhcp-server/dialogs2.rb:144 +#: src/include/dhcp-server/dialogs2.rb:146 msgid "Dynamic DHCP" msgstr "동적 DHCP" -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:152 +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:152 msgid "DHCP Server: Host Management" msgstr "DHCP 서버: 호스트 관리" -#. tree item -#: src/include/dhcp-server/dialogs2.rb:156 +#. tree item +#: src/include/dhcp-server/dialogs2.rb:156 msgid "Host Management" msgstr "호스트 관리" -#. dialog caption -#: src/include/dhcp-server/dialogs2.rb:161 +#. dialog caption +#: src/include/dhcp-server/dialogs2.rb:161 msgid "DHCP Server: Expert Settings" msgstr "DHCP 서버: 고급 설정" -#. tree item -#: src/include/dhcp-server/dialogs2.rb:165 +#. tree item +#: src/include/dhcp-server/dialogs2.rb:165 msgid "Expert Settings" msgstr "고급 설정" -#. radio button -#: src/include/dhcp-server/dialogs2.rb:206 +#. radio button +#: src/include/dhcp-server/dialogs2.rb:206 msgid "When &Booting" msgstr "부팅 시(&B)" -#. radio button -#: src/include/dhcp-server/dialogs2.rb:208 +#. radio button +#: src/include/dhcp-server/dialogs2.rb:208 msgid "&Manually" msgstr "수동으로(&M)" -#. part of help text - radio button label, NO SHORTCUT!!! -#: src/include/dhcp-server/dialogs2.rb:212 +#. part of help text - radio button label, NO SHORTCUT!!! +#: src/include/dhcp-server/dialogs2.rb:212 msgid "When Booting" msgstr "부팅 시" -#. part of help text - radio button label, NO SHORTCUT!!! -#: src/include/dhcp-server/dialogs2.rb:214 +#. part of help text - radio button label, NO SHORTCUT!!! +#: src/include/dhcp-server/dialogs2.rb:214 msgid "Manually" msgstr "수동" -#: src/include/dhcp-server/dialogs2.rb:334 +#: src/include/dhcp-server/dialogs2.rb:334 msgid "DHCP Server Start-up Arguments" msgstr "DHCP 서버 시작 인수" -#. Table - listing available network cards -#: src/include/dhcp-server/dialogs2.rb:404 +#. Table - listing available network cards +#: src/include/dhcp-server/dialogs2.rb:404 msgid "Network Cards for DHCP Server" msgstr "DHCP 서버용 네트워크 카드" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dialogs2.rb:410 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dialogs2.rb:410 msgid "Selected" msgstr "선택됨" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dialogs2.rb:412 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dialogs2.rb:412 msgid "Interface Name" msgstr "인터페이스 이름" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dialogs2.rb:414 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dialogs2.rb:414 msgid "Device Name" msgstr "장치 이름" -#. TRANSLATORS: table header item -#. Table header item - IP of the host -#: src/include/dhcp-server/dialogs2.rb:416 -#: src/include/dhcp-server/dialogs2.rb:1602 +#. TRANSLATORS: table header item +#. Table header item - IP of the host +#: src/include/dhcp-server/dialogs2.rb:416 +#: src/include/dhcp-server/dialogs2.rb:1602 msgid "IP" msgstr "IP" -#. TRANSLATORS: a push-button -#: src/include/dhcp-server/dialogs2.rb:423 +#. TRANSLATORS: a push-button +#: src/include/dhcp-server/dialogs2.rb:423 msgid "&Select" msgstr "선택(&S)" -#. TRANSLATORS: a push-button -#: src/include/dhcp-server/dialogs2.rb:425 +#. TRANSLATORS: a push-button +#: src/include/dhcp-server/dialogs2.rb:425 msgid "&Deselect" msgstr "선택해제(&L)" -#. TRANSLATORS: Table items; Informs that the IP is a DHCP Address -#: src/include/dhcp-server/dialogs2.rb:494 +#. TRANSLATORS: Table items; Informs that the IP is a DHCP Address +#: src/include/dhcp-server/dialogs2.rb:494 msgid "DHCP address" msgstr "DHCP 주소" -#. TRANSLATORS: popup error, DHCP Server needs to run on one or more interfaces, -#. currently no one is selected -#: src/include/dhcp-server/dialogs2.rb:569 +#. TRANSLATORS: popup error, DHCP Server needs to run on one or more interfaces, +#. currently no one is selected +#: src/include/dhcp-server/dialogs2.rb:569 msgid "At least one network interface must be selected." msgstr "네트워크 인터페이스를 적어도 하나는 선택해야 합니다." -#. TRANSLATORS: popup error, DHCP Server requires selected interface to have -#. at least minimal configuration -#: src/include/dhcp-server/dialogs2.rb:577 +#. TRANSLATORS: popup error, DHCP Server requires selected interface to have +#. at least minimal configuration +#: src/include/dhcp-server/dialogs2.rb:577 msgid "" -"One or more selected network interfaces is not configured (no assigned IP " -"address \n" +"One or more selected network interfaces is not configured (no assigned IP address \n" "and netmask)." msgstr "" "선택한 네트워크 인터페이스가 하나 이상 구성되지 않았습니다(할당된 IP 주소 \n" "및 넷마스크가 없음)." -#. configuration will be saved in ldap? -#. check box -#: src/include/dhcp-server/dialogs2.rb:593 -#: src/include/dhcp-server/widgets.rb:1052 +#. configuration will be saved in ldap? +#. check box +#: src/include/dhcp-server/dialogs2.rb:593 +#: src/include/dhcp-server/widgets.rb:1052 msgid "&LDAP Support" msgstr "LDAP 지원(&L)" -#. FATE #227, comments #5 and #17 -#: src/include/dhcp-server/dialogs2.rb:600 +#. FATE #227, comments #5 and #17 +#: src/include/dhcp-server/dialogs2.rb:600 msgid "DHCP Server &Name (optional)" msgstr "DHCP 서버 이름(선택 사항)(&N)" -#. Textentry with name of the domain -#: src/include/dhcp-server/dialogs2.rb:613 +#. Textentry with name of the domain +#: src/include/dhcp-server/dialogs2.rb:613 msgid "&Domain Name" msgstr "도메인 이름(&D)" -#. Textentry with IP address of primary name server -#: src/include/dhcp-server/dialogs2.rb:615 +#. Textentry with IP address of primary name server +#: src/include/dhcp-server/dialogs2.rb:615 msgid "&Primary Name Server IP" msgstr "주 이름 서버 IP(&P)" -#. Textentry with IP address of secondary name server -#: src/include/dhcp-server/dialogs2.rb:618 +#. Textentry with IP address of secondary name server +#: src/include/dhcp-server/dialogs2.rb:618 msgid "&Secondary Name Server IP" msgstr "보조 이름 서버 IP(&S)" -#. Textentry with IP address of default router -#: src/include/dhcp-server/dialogs2.rb:621 +#. Textentry with IP address of default router +#: src/include/dhcp-server/dialogs2.rb:621 msgid "Default &Gateway (Router) " msgstr "기본 게이트웨이(라우터)(&G)" -#. Textentry with IP address of time server -#: src/include/dhcp-server/dialogs2.rb:626 +#. Textentry with IP address of time server +#: src/include/dhcp-server/dialogs2.rb:626 msgid "NTP &Time Server" msgstr "NTP 시간 서버(&T)" -#. Textentry with IP address of print server -#: src/include/dhcp-server/dialogs2.rb:628 +#. Textentry with IP address of print server +#: src/include/dhcp-server/dialogs2.rb:628 msgid "&Print Server" msgstr "프린트 서버(&P)" -#. Textentry with IP address of WINS (Windows Internet Naming Service) server -#: src/include/dhcp-server/dialogs2.rb:630 +#. Textentry with IP address of WINS (Windows Internet Naming Service) server +#: src/include/dhcp-server/dialogs2.rb:630 msgid "&WINS Server" msgstr "WINS 서버(&W)" -#. Textentry with default lease time of IP address from dhcp server -#: src/include/dhcp-server/dialogs2.rb:635 +#. Textentry with default lease time of IP address from dhcp server +#: src/include/dhcp-server/dialogs2.rb:635 msgid "Default &Lease Time" msgstr "기본 임대 시간(&L)" -#. Units for defaultleasetime -#. Combobox - type of units for lease time -#: src/include/dhcp-server/dialogs2.rb:644 -#: src/include/dhcp-server/dialogs2.rb:1097 +#. Units for defaultleasetime +#. Combobox - type of units for lease time +#: src/include/dhcp-server/dialogs2.rb:644 +#: src/include/dhcp-server/dialogs2.rb:1097 msgid "&Units" msgstr "단위(&U)" -#. error popup -#. error popup -#. error popup -#. error popup -#: src/include/dhcp-server/dialogs2.rb:975 -#: src/include/dhcp-server/dialogs2.rb:987 -#: src/include/dhcp-server/dialogs2.rb:999 -#: src/include/dhcp-server/dialogs2.rb:1011 +#. error popup +#. error popup +#. error popup +#. error popup +#: src/include/dhcp-server/dialogs2.rb:975 +#: src/include/dhcp-server/dialogs2.rb:987 +#: src/include/dhcp-server/dialogs2.rb:999 +#: src/include/dhcp-server/dialogs2.rb:1011 msgid "The specified value is not a valid hostname or IP address." msgstr "지정한 값은 유효한 호스트 이름 또는 IP 주소가 아닙니다." -#. frame -#: src/include/dhcp-server/dialogs2.rb:1025 +#. frame +#: src/include/dhcp-server/dialogs2.rb:1025 msgid "Subnet Information" msgstr "서브넷 정보" -#. TRANSLATORS: informative text entry (filled up, disabled) -#: src/include/dhcp-server/dialogs2.rb:1031 +#. TRANSLATORS: informative text entry (filled up, disabled) +#: src/include/dhcp-server/dialogs2.rb:1031 msgid "Current &Network" msgstr "현재 네트워크(&N)" -#. TRANSLATORS: informative text entry (filled up, disabled) -#: src/include/dhcp-server/dialogs2.rb:1036 +#. TRANSLATORS: informative text entry (filled up, disabled) +#: src/include/dhcp-server/dialogs2.rb:1036 msgid "Current Net&mask" msgstr "현재 넷마스크(&M)" -#. TRANSLATORS: informative text entry (filled up, disabled) -#: src/include/dhcp-server/dialogs2.rb:1041 +#. TRANSLATORS: informative text entry (filled up, disabled) +#: src/include/dhcp-server/dialogs2.rb:1041 msgid "Netmask Bi&ts" msgstr "넷마스크 비트(&T)" -#. text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dialogs2.rb:1048 -#: src/include/dhcp-server/dns-server-dialogs.rb:81 +#. text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dialogs2.rb:1048 +#: src/include/dhcp-server/dns-server-dialogs.rb:81 msgid "Min&imum IP Address" msgstr "최소 IP 주소(&I)" -#. text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dialogs2.rb:1053 -#: src/include/dhcp-server/dns-server-dialogs.rb:83 +#. text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dialogs2.rb:1053 +#: src/include/dhcp-server/dns-server-dialogs.rb:83 msgid "Ma&ximum IP Address" msgstr "최대 IP 주소(&X)" -#: src/include/dhcp-server/dialogs2.rb:1061 +#: src/include/dhcp-server/dialogs2.rb:1061 msgid "IP Address Range" msgstr "IP 주소 범위" -#. text entry -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dialogs2.rb:1067 -#: src/include/dhcp-server/dns-server-dialogs.rb:93 -#: src/include/dhcp-server/dns-server-management.rb:355 -#: src/include/dhcp-server/dns-server-management.rb:915 +#. text entry +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dialogs2.rb:1067 +#: src/include/dhcp-server/dns-server-dialogs.rb:93 +#: src/include/dhcp-server/dns-server-management.rb:355 +#: src/include/dhcp-server/dns-server-management.rb:915 msgid "&First IP Address" msgstr "첫 번째 IP 주소(&F)" -#. text entry -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dialogs2.rb:1072 -#: src/include/dhcp-server/dns-server-dialogs.rb:95 -#: src/include/dhcp-server/dns-server-management.rb:357 -#: src/include/dhcp-server/dns-server-management.rb:917 +#. text entry +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dialogs2.rb:1072 +#: src/include/dhcp-server/dns-server-dialogs.rb:95 +#: src/include/dhcp-server/dns-server-management.rb:357 +#: src/include/dhcp-server/dns-server-management.rb:917 msgid "&Last IP Address" msgstr "마지막 IP 주소(&L)" -#. checkbox -#: src/include/dhcp-server/dialogs2.rb:1076 -#: src/include/dhcp-server/options.rb:1093 +#. checkbox +#: src/include/dhcp-server/dialogs2.rb:1076 +#: src/include/dhcp-server/options.rb:1093 msgid "Allow Dynamic &BOOTP" msgstr "동적 BOOTP 허용(&B)" -#. frame label -#: src/include/dhcp-server/dialogs2.rb:1082 +#. frame label +#: src/include/dhcp-server/dialogs2.rb:1082 msgid "Lease Time" msgstr "임대 시간" -#. Textentry label - lease time for IPs in the range -#: src/include/dhcp-server/dialogs2.rb:1088 +#. Textentry label - lease time for IPs in the range +#: src/include/dhcp-server/dialogs2.rb:1088 msgid "&Default" msgstr "기본(&D)" -#. TextEntryLabel - max. time for leasing of IPs from the range -#: src/include/dhcp-server/dialogs2.rb:1106 +#. TextEntryLabel - max. time for leasing of IPs from the range +#: src/include/dhcp-server/dialogs2.rb:1106 msgid "&Maximum" msgstr "최대(&X)" -#. Combobox - type of units for max lease time -#: src/include/dhcp-server/dialogs2.rb:1116 +#. Combobox - type of units for max lease time +#: src/include/dhcp-server/dialogs2.rb:1116 msgid "Uni&ts" msgstr "단위(&T)" -#. zone is not maintained by the DNS server -#. zone is maintained and it is a 'master' -#: src/include/dhcp-server/dialogs2.rb:1318 -#: src/include/dhcp-server/dialogs2.rb:1327 +#. zone is not maintained by the DNS server +#. zone is maintained and it is a 'master' +#: src/include/dhcp-server/dialogs2.rb:1318 +#: src/include/dhcp-server/dialogs2.rb:1327 msgid "Create New DNS Zone from Scratch" msgstr "아무 것도 없는 상태에서 새 DNS 영역 만들기" -#: src/include/dhcp-server/dialogs2.rb:1329 +#: src/include/dhcp-server/dialogs2.rb:1329 msgid "Edit Current DNS Zone" msgstr "현재 DNS 영역 편집" -#. zone is maintained but it is not a 'master' -#: src/include/dhcp-server/dialogs2.rb:1335 +#. zone is maintained but it is not a 'master' +#: src/include/dhcp-server/dialogs2.rb:1335 msgid "Get Current Zone Information" msgstr "현재 영역 정보 가져오기" -#: src/include/dhcp-server/dialogs2.rb:1343 +#: src/include/dhcp-server/dialogs2.rb:1343 msgid "&Synchronize DNS Server..." msgstr "DNS 서버 동기화(&S)..." -#. Show DNS Zone Information -#: src/include/dhcp-server/dialogs2.rb:1372 +#. Show DNS Zone Information +#: src/include/dhcp-server/dialogs2.rb:1372 msgid "" "DNS zone %1 is not a master zone.\n" "Therefore, you cannot change it here.\n" @@ -697,149 +696,148 @@ "DNS 영역 %1은(는) 마스터 영역이 아닙니다.\n" "따라서 여기서 변경할 수 없습니다.\n" -#. A popup error text -#. A popup error text -#: src/include/dhcp-server/dialogs2.rb:1499 -#: src/include/dhcp-server/dialogs2.rb:1507 +#. A popup error text +#. A popup error text +#: src/include/dhcp-server/dialogs2.rb:1499 +#: src/include/dhcp-server/dialogs2.rb:1507 msgid "Enter values for both ends of the IP address range." msgstr "IP 주소 범위 양 끝에 값을 입력하십시오." -#. TRANSLATORS: popup error message -#. %1 is the tested IP which should match network %2 and netmask %3 -#. TRANSLATORS: popup error message -#. %1 is the tested IP which should match network %2 and netmask %3 -#: src/include/dhcp-server/dialogs2.rb:1546 -#: src/include/dhcp-server/dialogs2.rb:1569 +#. TRANSLATORS: popup error message +#. %1 is the tested IP which should match network %2 and netmask %3 +#. TRANSLATORS: popup error message +#. %1 is the tested IP which should match network %2 and netmask %3 +#: src/include/dhcp-server/dialogs2.rb:1546 +#: src/include/dhcp-server/dialogs2.rb:1569 msgid "" -"The dynamic DHCP address range must be in the same network as the DHCP " -"server.\n" +"The dynamic DHCP address range must be in the same network as the DHCP server.\n" "IP %1 does not match the network %2/%3." msgstr "" "동적 DHCP 주소 범위는 DHCP 서버와 같은 네트워크에 있어야 합니다.\n" "%1 IP는 %2/%3 네트워크와 일치하지 않습니다." -#. Label of the registered hosts table -#: src/include/dhcp-server/dialogs2.rb:1594 +#. Label of the registered hosts table +#: src/include/dhcp-server/dialogs2.rb:1594 msgid "Registered Host" msgstr "등록된 호스트" -#. Table header item - Name of the host -#: src/include/dhcp-server/dialogs2.rb:1600 +#. Table header item - Name of the host +#: src/include/dhcp-server/dialogs2.rb:1600 msgid "Name" msgstr "이름" -#. MAC address of the host -#: src/include/dhcp-server/dialogs2.rb:1604 +#. MAC address of the host +#: src/include/dhcp-server/dialogs2.rb:1604 msgid "Hardware Address" msgstr "하드웨어 주소" -#. Network type of the host -#: src/include/dhcp-server/dialogs2.rb:1606 +#. Network type of the host +#: src/include/dhcp-server/dialogs2.rb:1606 msgid "Type" msgstr "유형" -#. Frame label - configuration of particular host -#: src/include/dhcp-server/dialogs2.rb:1613 +#. Frame label - configuration of particular host +#: src/include/dhcp-server/dialogs2.rb:1613 msgid "List Setup" msgstr "설정 목록" -#. Textentry label - name of the host -#: src/include/dhcp-server/dialogs2.rb:1621 +#. Textentry label - name of the host +#: src/include/dhcp-server/dialogs2.rb:1621 msgid "&Name" msgstr "이름(&N)" -#. Textentry label - IP address of the host -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dialogs2.rb:1626 -#: src/include/dhcp-server/dns-server-management.rb:228 +#. Textentry label - IP address of the host +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dialogs2.rb:1626 +#: src/include/dhcp-server/dns-server-management.rb:228 msgid "&IP Address" msgstr "IP 주소(&I)" -#. Textentry label - hardware (mac) address of the host -#: src/include/dhcp-server/dialogs2.rb:1634 +#. Textentry label - hardware (mac) address of the host +#: src/include/dhcp-server/dialogs2.rb:1634 msgid "&Hardware Address" msgstr "하드웨어 주소(&H)" -#. Radiobutton label - network type of the host -#: src/include/dhcp-server/dialogs2.rb:1641 +#. Radiobutton label - network type of the host +#: src/include/dhcp-server/dialogs2.rb:1641 msgid "&Ethernet" msgstr "이더넷" -#: src/include/dhcp-server/dialogs2.rb:1643 +#: src/include/dhcp-server/dialogs2.rb:1643 msgid "&Token Ring" msgstr "토큰링" -#. Pushbutton label - change host in list -#: src/include/dhcp-server/dialogs2.rb:1658 +#. Pushbutton label - change host in list +#: src/include/dhcp-server/dialogs2.rb:1658 msgid "C&hange in List" msgstr "목록에서 변경(&H)" -#. Pushbutton label - delete host from list -#: src/include/dhcp-server/dialogs2.rb:1661 +#. Pushbutton label - delete host from list +#: src/include/dhcp-server/dialogs2.rb:1661 msgid "Dele&te from List" msgstr "목록에서 삭제(&T)" -#. now, fill the dialog -#. combo box entry, networking technology name -#: src/include/dhcp-server/dialogs2.rb:1762 -#: src/include/dhcp-server/options.rb:1038 +#. now, fill the dialog +#. combo box entry, networking technology name +#: src/include/dhcp-server/dialogs2.rb:1762 +#: src/include/dhcp-server/options.rb:1038 msgid "Ethernet" msgstr "이더넷" -#. combo box entry, networking technology name -#: src/include/dhcp-server/dialogs2.rb:1763 -#: src/include/dhcp-server/options.rb:1040 +#. combo box entry, networking technology name +#: src/include/dhcp-server/dialogs2.rb:1763 +#: src/include/dhcp-server/options.rb:1040 msgid "Token Ring" msgstr "토큰링" -#. error popup -#. error popup -#: src/include/dhcp-server/dialogs2.rb:1837 -#: src/include/dhcp-server/options.rb:934 +#. error popup +#. error popup +#: src/include/dhcp-server/dialogs2.rb:1837 +#: src/include/dhcp-server/options.rb:934 msgid "The hardware address is invalid.\n" msgstr "하드웨어 주소가 잘못되었습니다.\n" -#. error popup -#: src/include/dhcp-server/dialogs2.rb:1883 +#. error popup +#: src/include/dhcp-server/dialogs2.rb:1883 msgid "The hardware address must be unique." msgstr "하드웨어 주소에는 고유한 이름을 사용해야 합니다." -#. error popup -#: src/include/dhcp-server/dialogs2.rb:1893 +#. error popup +#: src/include/dhcp-server/dialogs2.rb:1893 msgid "The hostname cannot be empty." msgstr "호스트 이름은 비워 둘 수 없습니다." -#. error popup, %1 is host name -#: src/include/dhcp-server/dialogs2.rb:1903 +#. error popup, %1 is host name +#: src/include/dhcp-server/dialogs2.rb:1903 msgid "A host named %1 already exists." msgstr "%1(이)라는 이름을 갖는 호스트가 이미 존재합니다." -#. error popup -#. FIXME: text? -#: src/include/dhcp-server/dialogs2.rb:1921 -#: src/include/dhcp-server/dialogs2.rb:1985 +#. error popup +#. FIXME: text? +#: src/include/dhcp-server/dialogs2.rb:1921 +#: src/include/dhcp-server/dialogs2.rb:1985 msgid "Enter a host IP." msgstr "호스트 IP를 입력하십시오." -#. error popup -#: src/include/dhcp-server/dialogs2.rb:1936 +#. error popup +#: src/include/dhcp-server/dialogs2.rb:1936 msgid "The hardware address must be defined." msgstr "하드웨어 주소를 정의해야 합니다." -#. error popup -#. yes-no popup -#: src/include/dhcp-server/dialogs2.rb:1957 -#: src/include/dhcp-server/dialogs2.rb:1972 +#. error popup +#. yes-no popup +#: src/include/dhcp-server/dialogs2.rb:1957 +#: src/include/dhcp-server/dialogs2.rb:1972 msgid "Select a host first." msgstr "먼저 호스트를 선택하십시오." -#. checking new MAC -#: src/include/dhcp-server/dialogs2.rb:1999 +#. checking new MAC +#: src/include/dhcp-server/dialogs2.rb:1999 msgid "The input value must be defined." msgstr "입력 값을 정의해야 합니다." -#. yes-no popup -#: src/include/dhcp-server/dialogs2.rb:2038 +#. yes-no popup +#: src/include/dhcp-server/dialogs2.rb:2038 msgid "" "If you enter the expert settings, you cannot return \n" "to this dialog. You may be able to display this dialog \n" @@ -859,21 +857,20 @@ " \n" " 계속하시겠습니까?" -#. remove leading '-' -#: src/include/dhcp-server/dialogs2.rb:2085 +#. remove leading '-' +#: src/include/dhcp-server/dialogs2.rb:2085 msgid "\"-%1\" is not a valid DHCP server commandline option" msgstr "\"-%1\"은(는) 유효한 DHCP 서버 명령줄 옵션이 아닙니다." -#: src/include/dhcp-server/dialogs2.rb:2096 +#: src/include/dhcp-server/dialogs2.rb:2096 msgid "DHCP server commandline option \"-%1\" requires an argument" msgstr "DHCP 서버 명령줄 옵션 \"-%1\"에 인수가 필요합니다." -#: src/include/dhcp-server/dialogs2.rb:2107 +#: src/include/dhcp-server/dialogs2.rb:2107 msgid "" "You have specified an alternate configuration file for the DHCP server.\n" "\n" -"YaST does not supported this. The DHCP server module can only read and " -"write\n" +"YaST does not supported this. The DHCP server module can only read and write\n" "/etc/dhcpd.conf. The new configuration from %1 will not be imported. All\n" "changes will be saved to the default configuration file.\n" " \n" @@ -882,28 +879,26 @@ "DHCP 서버에 대체 구성 파일을 지정했습니다.\n" "\n" "YaST는 이 기능을 지원하지 않습니다. DHCP 서버 모듈은\n" -"/etc/dhcpd.conf만 읽고 쓸 수 있습니다. %1의 새 구성이 임포트되지 않습니다. 모" -"든\n" +"/etc/dhcpd.conf만 읽고 쓸 수 있습니다. %1의 새 구성이 임포트되지 않습니다. 모든\n" "변경사항은 기본 구성 파일에 저장됩니다.\n" " \n" "계속하시겠습니까?\n" -#. dialog caption, %1 is step number -#: src/include/dhcp-server/dialogs2.rb:2179 +#. dialog caption, %1 is step number +#: src/include/dhcp-server/dialogs2.rb:2179 msgid "DHCP Server Wizard (%1 of 4)" msgstr "DHCP 서버 마법사(%1/4)" -#. TRANSLATORS: -#. DNS Wizard - step 3 (part 4) -#. and -#. DNS for Experts (editing current settings) (part 5) -#: src/include/dhcp-server/dns-helps.rb:18 +#. TRANSLATORS: +#. DNS Wizard - step 3 (part 4) +#. and +#. DNS for Experts (editing current settings) (part 5) +#: src/include/dhcp-server/dns-helps.rb:18 msgid "" "<p><b><big>Adding a New Range of DNS Records</big></b><br />\n" "<b>First IP Address</b> defines\n" "the starting address of the range and <b>Last IP Address</b> defines\n" -"the last one. <b>Hostname Base</b> is a string that determines how " -"hostnames\n" +"the last one. <b>Hostname Base</b> is a string that determines how hostnames\n" "are created (such as <tt>dhcp-%i</tt> or <tt>e25-%i-a</tt>).\n" "<tt>%i</tt> is replaced with the number of the host in the range.\n" "If no <tt>%i</tt> is defined, the number is added at the end of the\n" @@ -915,17 +910,15 @@ "<b>첫 번째 IP 주소</b>는\n" "범위의 시작 주소를 정의하고 <b>마지막 IP 주소</b>는\n" "마지막 주소를 정의합니다. <b>호스트 이름 기준</b>은 호스트 이름이\n" -"생성되는 방법을 결정하는 문자열(예: <tt>dhcp-%i</tt> 또는 <tt>e25-%i-a</tt>)" -"입니다.\n" +"생성되는 방법을 결정하는 문자열(예: <tt>dhcp-%i</tt> 또는 <tt>e25-%i-a</tt>)입니다.\n" "<tt>%i</tt>은(는) 범위의 호스트 번호로 바뀝니다.\n" "<tt>%i</tt>이(가) 정의되지 않은 경우 문자열 끝에 \n" -"번호가 추가됩니다. <tt>%i</tt>은(는) <b>호스트 이름 기준</b>에 한 번만 사용" -"할 수 있습니다.\n" +"번호가 추가됩니다. <tt>%i</tt>은(는) <b>호스트 이름 기준</b>에 한 번만 사용할 수 있습니다.\n" "<b>시작</b>은 첫 번째 호스트 이름에 사용되는\n" "첫 번째 번호를 정의합니다. 호스트 이름은 증분 방식으로 생성됩니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 1 (part 1) -#: src/include/dhcp-server/dns-helps.rb:33 +#. TRANSLATORS: DNS Wizard - step 1 (part 1) +#: src/include/dhcp-server/dns-helps.rb:33 msgid "" "<p><b><big>DNS Wizard</big></b><br />\n" "In this wizard, create a new DNS zone\n" @@ -941,18 +934,17 @@ "이름을 할당된 IP 주소로 변환합니다. IP 주소를 이름으로 변환하는\n" "역방향 영역을 생성할 수도 있습니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 1 (part 2) -#: src/include/dhcp-server/dns-helps.rb:42 +#. TRANSLATORS: DNS Wizard - step 1 (part 2) +#: src/include/dhcp-server/dns-helps.rb:42 msgid "" "<p><b>New Zone Name</b> or <b>Reverse Zone Name</b>\n" -"are taken from your current DHCP server and network settings and cannot be " -"changed.</p>\n" +"are taken from your current DHCP server and network settings and cannot be changed.</p>\n" msgstr "" "<p><b>새 영역 이름</b> 또는 <b>역방향 영역 이름</b>은\n" "현재 DHCP 서버 및 네트워크 설정에서 가져오며 변경할 수 없습니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 1 (part 3) -#: src/include/dhcp-server/dns-helps.rb:46 +#. TRANSLATORS: DNS Wizard - step 1 (part 3) +#: src/include/dhcp-server/dns-helps.rb:46 msgid "" "<p>Select <b>Also Create Reverse Zone</b> to create a zone \n" "to contain reverse entries of the main DNS zone.</p>\n" @@ -960,8 +952,8 @@ "<p>주 DNS 영역의 역방향 항목을 포함시킬 영역을 만들려면\n" " <b>역방향 영역도 생성</b>을 선택하십시오.</p>\n" -#. TRANSLATORS: DNS Wizard - step 2 (part 1) -#: src/include/dhcp-server/dns-helps.rb:50 +#. TRANSLATORS: DNS Wizard - step 2 (part 1) +#: src/include/dhcp-server/dns-helps.rb:50 msgid "" "<p><big><b>Name Servers</b></big><br />\n" "Name servers are needed for proper DNS server functionality.\n" @@ -971,8 +963,8 @@ "올바른 DNS 서버 기능을 위해서는 이름 서버가 필요합니다.\n" "이름 서버는 모든 DNS 영역 레코드를 관리합니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 2 (part 2) -#: src/include/dhcp-server/dns-helps.rb:56 +#. TRANSLATORS: DNS Wizard - step 2 (part 2) +#: src/include/dhcp-server/dns-helps.rb:56 msgid "" "<p><b><big>DNS Queries</big></b><br />\n" "Every DNS query (for example searching an IP address for a\n" @@ -992,25 +984,23 @@ "따라서 항상 현재 DNS 서버 호스트 이름을\n" "영역 이름 서버 중 하나로 지정하십시오.</p>\n" -#. TRANSLATORS: DNS Wizard - step 2 (part 3) -#: src/include/dhcp-server/dns-helps.rb:67 +#. TRANSLATORS: DNS Wizard - step 2 (part 3) +#: src/include/dhcp-server/dns-helps.rb:67 msgid "" "<p>To add a <b>New Name Server</b>, click <b>Add</b>, complete the form,\n" -"then click <b>Ok</b>. If the new name server name is included in the " -"current\n" +"then click <b>Ok</b>. If the new name server name is included in the current\n" "DNS zone, also enter its IP address. This is mandatory because it is used\n" "during the zone creation.</p>\n" msgstr "" "<p><b>새 이름 서버</b>를 추가하려면 <b>추가</b>를 클릭하고 양식을 완성한\n" -"다음 <b>확인</b>을 클릭합니다. 새 이름 서버 이름이 현재 DNS 영역에 포함되어 " -"있으면\n" +"다음 <b>확인</b>을 클릭합니다. 새 이름 서버 이름이 현재 DNS 영역에 포함되어 있으면\n" " 해당 IP 주소도 입력합니다. 영역 생성 시 사용되므로 필수입니다.\n" " </p>\n" -#. TRANSLATORS: DNS Wizard - step 2 (part 4) -#. TRANSLATORS: DNS Wizard - step 3 (part 5) -#: src/include/dhcp-server/dns-helps.rb:74 -#: src/include/dhcp-server/dns-helps.rb:102 +#. TRANSLATORS: DNS Wizard - step 2 (part 4) +#. TRANSLATORS: DNS Wizard - step 3 (part 5) +#: src/include/dhcp-server/dns-helps.rb:74 +#: src/include/dhcp-server/dns-helps.rb:102 msgid "" "<p>To edit or delete an entry, select it and click\n" "<b>Edit</b> or <b>Delete</b>.</p>\n" @@ -1018,25 +1008,23 @@ "<p>항목을 편집하거나 삭제하려면 해당 항목을 \n" "선택하고 <b>편집</b>이나 <b>삭제</b>를 클릭합니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 3 (part 1) -#: src/include/dhcp-server/dns-helps.rb:80 +#. TRANSLATORS: DNS Wizard - step 3 (part 1) +#: src/include/dhcp-server/dns-helps.rb:80 msgid "" "<p><b><big>DNS Records</big></b><br />\n" "Define DNS hostnames for all DHCP clients. You do not need to define\n" "all hostnames one by one. Set simple rules for how\n" -"the hostnames are created. These rules define the ranges of IP addresses to " -"use\n" +"the hostnames are created. These rules define the ranges of IP addresses to use\n" "and the string from which hostnames are generated for a range.</p>\n" msgstr "" "<p><b><big>DNS 레코드</big></b><br />\n" "모든 DHCP 클라이언트의 DNS 호스트 이름을 정의합니다. 모든 호스트 이름을\n" "하나씩 정의할 필요는 없습니다. 호스트 이름이\n" -"생성되는 방법에 대한 간단한 규칙을 설정하십시오. 이러한 규칙은 사용할 IP 주" -"소 범위\n" +"생성되는 방법에 대한 간단한 규칙을 설정하십시오. 이러한 규칙은 사용할 IP 주소 범위\n" "및 범위에 대한 호스트 이름이 생성되는 문자열을 정의합니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 3 (part 2) -#: src/include/dhcp-server/dns-helps.rb:88 +#. TRANSLATORS: DNS Wizard - step 3 (part 2) +#: src/include/dhcp-server/dns-helps.rb:88 msgid "" "<p><b><big>Range of DNS Records</big></b><br />\n" "For example, create a set of hostnames from <tt>dhcp-133-a</tt>\n" @@ -1048,8 +1036,8 @@ "<tt>dhcp-133-a</tt> - <tt>dhcp-233-a</tt>의 \n" "호스트 이름 집합을 생성합니다.</p>\n" -#. TRANSLATORS: DNS Wizard - step 3 (part 3) -#: src/include/dhcp-server/dns-helps.rb:95 +#. TRANSLATORS: DNS Wizard - step 3 (part 3) +#: src/include/dhcp-server/dns-helps.rb:95 msgid "" "<p>To add a new range of DNS records, click <b>Add</b>,\n" "complete the form, then click <b>Ok</b>.</p>\n" @@ -1057,8 +1045,8 @@ "<p>새 DNS 레코드 범위를 추가하려면 <b>추가</b>를\n" "클릭하고 양식을 완료한 다음 <b>확인</b>을 클릭합니다.</p>\n" -#. TRANSLATORS: DNS Wizard - summary (part 1) -#: src/include/dhcp-server/dns-helps.rb:107 +#. TRANSLATORS: DNS Wizard - summary (part 1) +#: src/include/dhcp-server/dns-helps.rb:107 msgid "" "<p>This is a summary of all data\n" "entered in the configuration wizard so far.</p>\n" @@ -1066,8 +1054,8 @@ "<p>다음은 지금까지 구성 마법사에서\n" "입력한 모든 데이터를 요약한 것입니다.</p>\n" -#. TRANSLATORS: DNS Wizard - summary (part 2) -#: src/include/dhcp-server/dns-helps.rb:111 +#. TRANSLATORS: DNS Wizard - summary (part 2) +#: src/include/dhcp-server/dns-helps.rb:111 msgid "" "<p>Click <b>Accept</b> to save the settings for\n" "the DNS server and return to the DHCP server configuration.\n" @@ -1079,8 +1067,8 @@ " 이 설정은 DHCP 서버 구성을 완료할 때까지 영구히 저장되지\n" " 않습니다.</p>\n" -#. TRANSLATORS: DNS for Experts (editing current settings) (part 1) -#: src/include/dhcp-server/dns-helps.rb:119 +#. TRANSLATORS: DNS for Experts (editing current settings) (part 1) +#: src/include/dhcp-server/dns-helps.rb:119 msgid "" "<p><b><big>DNS Synchronization</big></b><br />\n" "This is an advanced tool for editing DNS server settings to match your\n" @@ -1089,12 +1077,11 @@ msgstr "" "<p><b><big>DNS 동기화</big></b><br />\n" "사용자의 DHCP 설정과 일치하도록 DNS 서버 설정을 편집하기 위한 고급\n" -"도구입니다. 여기서는 호스트 이름을 IP 주소로 변환하는 DNS 레코드인 'A' 레코드" -"만 \n" +"도구입니다. 여기서는 호스트 이름을 IP 주소로 변환하는 DNS 레코드인 'A' 레코드만 \n" "관리됩니다.</p>\n" -#. TRANSLATORS: DNS for Experts (editing current settings) (part 2) -#: src/include/dhcp-server/dns-helps.rb:126 +#. TRANSLATORS: DNS for Experts (editing current settings) (part 2) +#: src/include/dhcp-server/dns-helps.rb:126 msgid "" "<b>Current Subnet</b> and <b>Netmask</b> show the current network settings.\n" "<b>Domain</b> is taken from the current DHCP configuration.\n" @@ -1106,8 +1093,8 @@ "<b>첫 번째 IP 주소</b> 및 <b>두 번째 IP 주소</b>는 현재\n" "동적 DHCP 범위와 일치합니다.</p>\n" -#. TRANSLATORS: DNS for Experts (editing current settings) (part 3) -#: src/include/dhcp-server/dns-helps.rb:133 +#. TRANSLATORS: DNS for Experts (editing current settings) (part 3) +#: src/include/dhcp-server/dns-helps.rb:133 msgid "" "<p>\n" "To create a DNS zone from scratch, use <b>Run Wizard</b>\n" @@ -1117,19 +1104,16 @@ "아무 것도 없는 상태에서 DNS 영역을 만들려면 <b>특수 업무</b>에서\n" " <b>마법사 실행</b>을 사용합니다.</p>\n" -#. TRANSLATORS: DNS for Experts (editing current settings) (part 4) -#: src/include/dhcp-server/dns-helps.rb:139 +#. TRANSLATORS: DNS for Experts (editing current settings) (part 4) +#: src/include/dhcp-server/dns-helps.rb:139 msgid "" "<p>\n" " To create or remove a single DNS record,\n" "click <b>Add</b> or <b>Delete</b>.\n" -"To synchronize the DNS entries with their reverse forms in the " -"corresponding\n" +"To synchronize the DNS entries with their reverse forms in the corresponding\n" "reverse zone, select <b>Synchronize with Reverse Zone</b>.\n" "Use <b>Remove DNS Records Matching Range</b> \n" -"from <b>Special Tasks</b> to delete any information relating to this range " -"of IP addresses from the DNS server. To create a new range of DNS records, " -"select\n" +"from <b>Special Tasks</b> to delete any information relating to this range of IP addresses from the DNS server. To create a new range of DNS records, select\n" "<b>Add New Range of DNS Records</b> from <b>Special Tasks</b>.</p>\n" msgstr "" "<p>\n" @@ -1138,38 +1122,37 @@ " DNS 항목을 해당 역방향 영역의 역방향 양식과 동기화하려면\n" " <b>역방향 영역과 동기화</b>를 선택합니다.\n" " DNS 서버에서 이 IP 주소 범위와 관련된 정보를 \n" -" 모두 삭제하려면 <b>특수 업무</b>의 <b>범위 일치 DNS 레코드 제거</b>를 사용합" -"니다. 새 DNS 레코드 범위를 만들려면 <b>특수 업무</b>의\n" +" 모두 삭제하려면 <b>특수 업무</b>의 <b>범위 일치 DNS 레코드 제거</b>를 사용합니다. 새 DNS 레코드 범위를 만들려면 <b>특수 업무</b>의\n" " <b>새 DNS 레코드 범위 추가</b>를 선택합니다.</p>\n" -#. old_range: $[ -#. "base" : "dhcp-%", -#. "start" : 0, -#. "from" : "192.168.10.1", -#. "to" : "192.168.10.100" -#. ] -#. TRANSLATORS: dialog caption -#: src/include/dhcp-server/dns-server-dialogs.rb:65 +#. old_range: $[ +#. "base" : "dhcp-%", +#. "start" : 0, +#. "from" : "192.168.10.1", +#. "to" : "192.168.10.100" +#. ] +#. TRANSLATORS: dialog caption +#: src/include/dhcp-server/dns-server-dialogs.rb:65 msgid "Add New DNS Record Range" msgstr "새 DNS 레코드 범위 추가" -#. TRANSLATORS: dialog caption -#: src/include/dhcp-server/dns-server-dialogs.rb:68 +#. TRANSLATORS: dialog caption +#: src/include/dhcp-server/dns-server-dialogs.rb:68 msgid "Edit DNS Record Range" msgstr "DNS 레코드 범위 편집" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-dialogs.rb:87 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-dialogs.rb:87 msgid "&Hostname Base" msgstr "호스트 이름 기준(&H)" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-dialogs.rb:89 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-dialogs.rb:89 msgid "&Start" msgstr "시작(&S)" -#. TRANSLATORS: popup error, %1 is the first IP of the range, %2 is the last one -#: src/include/dhcp-server/dns-server-dialogs.rb:154 +#. TRANSLATORS: popup error, %1 is the first IP of the range, %2 is the last one +#: src/include/dhcp-server/dns-server-dialogs.rb:154 msgid "" "Internal error.\n" "Cannot create IP range from %1 and %2." @@ -1177,11 +1160,11 @@ "내부 오류입니다.\n" "%1 - %2 사이의 IP 범위를 만들 수 없습니다." -#. TRANSLATORS: popup error, %1 is an IP address -#. %2 is a network, %3 is a netmask -#. network bits must be the same in both IP and Network -#: src/include/dhcp-server/dns-server-dialogs.rb:179 -#: src/include/dhcp-server/dns-server-dialogs.rb:195 +#. TRANSLATORS: popup error, %1 is an IP address +#. %2 is a network, %3 is a netmask +#. network bits must be the same in both IP and Network +#: src/include/dhcp-server/dns-server-dialogs.rb:179 +#: src/include/dhcp-server/dns-server-dialogs.rb:195 msgid "" "IP address %1 does not match\n" "the current network %2/%3.\n" @@ -1189,19 +1172,19 @@ "%1 IP 주소가 %2/%3의 현재 \n" "네트워크와 일치하지 않습니다.\n" -#. TRANSLATORS: popup error -#. TRANSLATORS: popup error -#: src/include/dhcp-server/dns-server-dialogs.rb:228 -#: src/include/dhcp-server/dns-server-management.rb:454 +#. TRANSLATORS: popup error +#. TRANSLATORS: popup error +#: src/include/dhcp-server/dns-server-dialogs.rb:228 +#: src/include/dhcp-server/dns-server-management.rb:454 msgid "The last IP address must be higher than the first one." msgstr "마지막 IP 주소는 첫 번째 IP 주소보다 높아야 합니다." -#. TRANSLATORS: popup error, %1 an IP address -#. %2 is the first IP address of the range, %3 is the last one -#. TRANSLATORS: popup error, %1 an IP address -#. %2 is the first IP address of the range, %3 is the last one -#: src/include/dhcp-server/dns-server-dialogs.rb:246 -#: src/include/dhcp-server/dns-server-dialogs.rb:272 +#. TRANSLATORS: popup error, %1 an IP address +#. %2 is the first IP address of the range, %3 is the last one +#. TRANSLATORS: popup error, %1 an IP address +#. %2 is the first IP address of the range, %3 is the last one +#: src/include/dhcp-server/dns-server-dialogs.rb:246 +#: src/include/dhcp-server/dns-server-dialogs.rb:272 msgid "" "The IP address %1 is\n" "outside the current\n" @@ -1211,37 +1194,37 @@ "현재 동적 DHCP 범위\n" "%2-%3을(를) 벗어났습니다.\n" -#. TRANSLATORS: popup error '%i' is a special string, do not translate it, please -#: src/include/dhcp-server/dns-server-dialogs.rb:422 +#. TRANSLATORS: popup error '%i' is a special string, do not translate it, please +#: src/include/dhcp-server/dns-server-dialogs.rb:422 msgid "There can be only one '%i' in the hostname base string." msgstr "호스트 이름 기준 문자열에는 '%i'이(가) 한 개만 있을 수 있습니다." -#. TRANSLATORS: popup error, followed by a newline and a valid hostname description -#. TRANSLATORS: popup error, followed by a newline and a valid hostname description -#: src/include/dhcp-server/dns-server-dialogs.rb:453 -#: src/include/dhcp-server/dns-server-management.rb:255 +#. TRANSLATORS: popup error, followed by a newline and a valid hostname description +#. TRANSLATORS: popup error, followed by a newline and a valid hostname description +#: src/include/dhcp-server/dns-server-dialogs.rb:453 +#: src/include/dhcp-server/dns-server-management.rb:255 msgid "Invalid hostname." msgstr "호스트 이름이 잘못되었습니다." -#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description -#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description -#. TRANSLATORS: poupu error, followed by a newlone and a valid IPv4 description -#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description -#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description -#: src/include/dhcp-server/dns-server-dialogs.rb:462 -#: src/include/dhcp-server/dns-server-dialogs.rb:490 -#: src/include/dhcp-server/dns-server-management.rb:264 -#: src/include/dhcp-server/dns-server-management.rb:393 -#: src/include/dhcp-server/dns-server-management.rb:401 +#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description +#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description +#. TRANSLATORS: poupu error, followed by a newlone and a valid IPv4 description +#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description +#. TRANSLATORS: popup error, followed by a newline and a valid IPv4 description +#: src/include/dhcp-server/dns-server-dialogs.rb:462 +#: src/include/dhcp-server/dns-server-dialogs.rb:490 +#: src/include/dhcp-server/dns-server-management.rb:264 +#: src/include/dhcp-server/dns-server-management.rb:393 +#: src/include/dhcp-server/dns-server-management.rb:401 msgid "Invalid IP address." msgstr "IP 주소가 잘못되었습니다." -#. TRANSLATORS: popup error, %1 is an IP address -#. %2 is the first IP address of the range, %3 is the last one -#. TRANSLATORS: popup error, %1 is an IP address -#. %2 is the first IP address of the range, %3 is the last one -#: src/include/dhcp-server/dns-server-dialogs.rb:475 -#: src/include/dhcp-server/dns-server-dialogs.rb:503 +#. TRANSLATORS: popup error, %1 is an IP address +#. %2 is the first IP address of the range, %3 is the last one +#. TRANSLATORS: popup error, %1 is an IP address +#. %2 is the first IP address of the range, %3 is the last one +#: src/include/dhcp-server/dns-server-dialogs.rb:475 +#: src/include/dhcp-server/dns-server-dialogs.rb:503 msgid "" "IP address %1 is not in the range of allowed\n" "IP addresses (%2-%3) defined in the DHCP server.\n" @@ -1249,45 +1232,45 @@ "%1 IP 주소가 DHCP 서버에 정의되어 있는 \n" " 허용된 IP 주소 범위(%2-%3) 밖에 있습니다.\n" -#. TRANSLATORS: busy message -#: src/include/dhcp-server/dns-server-management.rb:156 +#. TRANSLATORS: busy message +#: src/include/dhcp-server/dns-server-management.rb:156 msgid "Regenerating DNS zone entries..." msgstr "DNS 영역 항목 다시 생성 중..." -#. TRANSLATORS: dialog frame label -#: src/include/dhcp-server/dns-server-management.rb:223 +#. TRANSLATORS: dialog frame label +#: src/include/dhcp-server/dns-server-management.rb:223 msgid "Adding a New DNS Record" msgstr "새 DNS 레코드 추가" -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-management.rb:226 -#: src/include/dhcp-server/dns-server-wizard.rb:148 +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-management.rb:226 +#: src/include/dhcp-server/dns-server-wizard.rb:148 msgid "&Hostname" msgstr "호스트 이름(&H)" -#. TRANSLATORS: busy message -#. %1 is the first IP address of the range, %2 is the last one -#: src/include/dhcp-server/dns-server-management.rb:316 +#. TRANSLATORS: busy message +#. %1 is the first IP address of the range, %2 is the last one +#: src/include/dhcp-server/dns-server-management.rb:316 msgid "Adding DHCP range %1-%2 to the DNS server..." msgstr "DNS 서버에 DHCP 범위 %1-%2 추가 중..." -#. TRANSLATORS: dialog frame label -#. TRANSLATORS: menu entry -#: src/include/dhcp-server/dns-server-management.rb:352 -#: src/include/dhcp-server/dns-server-management.rb:953 +#. TRANSLATORS: dialog frame label +#. TRANSLATORS: menu entry +#: src/include/dhcp-server/dns-server-management.rb:352 +#: src/include/dhcp-server/dns-server-management.rb:953 msgid "Removing DNS Records Matching Range" msgstr "범위 일치 DNS 레코드 제거" -#. TRANSLATORS: busy message -#. %1 is the first IP address of the range, %2 is the last one -#: src/include/dhcp-server/dns-server-management.rb:464 +#. TRANSLATORS: busy message +#. %1 is the first IP address of the range, %2 is the last one +#: src/include/dhcp-server/dns-server-management.rb:464 msgid "Removing records in the range %1-%2 from the DNS server..." msgstr "DNS 서버에서 %1-%2 범위의 레코드 제거 중..." -#. TRANSLATORS: popup error, %1 is the zone name -#. please, do not translate 'master' (exact DNS definition) -#: src/include/dhcp-server/dns-server-management.rb:555 +#. TRANSLATORS: popup error, %1 is the zone name +#. please, do not translate 'master' (exact DNS definition) +#: src/include/dhcp-server/dns-server-management.rb:555 msgid "" "Zone %1 is not of the type master.\n" "The DNS server cannot write any records to it.\n" @@ -1295,8 +1278,8 @@ "%1 영역은 마스터 유형이 아닙니다.\n" "DNS 서버가 여기에 레코드를 쓸 수 없습니다.\n" -#. TRANSLATORS: popup question, %1 is a DNS zone name -#: src/include/dhcp-server/dns-server-management.rb:569 +#. TRANSLATORS: popup question, %1 is a DNS zone name +#: src/include/dhcp-server/dns-server-management.rb:569 msgid "" "Zone %1 does not yet exist in the current DNS server configuration.\n" "Create it?\n" @@ -1304,20 +1287,20 @@ "%1 영역이 현재 DNS 서버 구성에 아직 없습니다.\n" "만드시겠습니까?\n" -#. TRANSLATORS: popup error, %1 is a zone name -#. TRANSLATORS: error message, %1 is a zone name -#: src/include/dhcp-server/dns-server-management.rb:589 -#: src/include/dhcp-server/dns-server-wizard.rb:1107 +#. TRANSLATORS: popup error, %1 is a zone name +#. TRANSLATORS: error message, %1 is a zone name +#: src/include/dhcp-server/dns-server-management.rb:589 +#: src/include/dhcp-server/dns-server-wizard.rb:1107 msgid "Cannot create zone %1." msgstr "%1 영역을 만들 수 없습니다." -#. TRANSLATORS: busy message -#: src/include/dhcp-server/dns-server-management.rb:813 +#. TRANSLATORS: busy message +#: src/include/dhcp-server/dns-server-management.rb:813 msgid "Synchronizing DNS reverse records..." msgstr "DNS 역방향 레코드 동기화 중..." -#. TRANSLATORS: popup question - canceling dns synchronization with dhcp -#: src/include/dhcp-server/dns-server-management.rb:858 +#. TRANSLATORS: popup question - canceling dns synchronization with dhcp +#: src/include/dhcp-server/dns-server-management.rb:858 msgid "" "If you cancel, all changes made to the DNS server will be lost.\n" "Really cancel this operation?\n" @@ -1325,73 +1308,73 @@ "취소하면 DNS 서버에 대한 모든 변경사항이 손실됩니다.\n" "이 작업을 취소하시겠습니까?\n" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-management.rb:907 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-management.rb:907 msgid "&Domain" msgstr "도메인(&D)" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-management.rb:909 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-management.rb:909 msgid "&Network" msgstr "네트워크(&N)" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-management.rb:911 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-management.rb:911 msgid "Net&mask" msgstr "(&M)넷마스크" -#. TRANSLATORS: table label -#: src/include/dhcp-server/dns-server-management.rb:921 +#. TRANSLATORS: table label +#: src/include/dhcp-server/dns-server-management.rb:921 msgid "DNS Zone Records" msgstr "DNS 영역 레코드" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-management.rb:926 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-management.rb:926 msgid "Hostname" msgstr "호스트 이름" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-management.rb:928 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-management.rb:928 msgid "Assigned IP" msgstr "할당된 IP" -#. TRANSLATORS: push button -#: src/include/dhcp-server/dns-server-management.rb:935 +#. TRANSLATORS: push button +#: src/include/dhcp-server/dns-server-management.rb:935 msgid "&Add..." msgstr "추가" -#. TRANSLATORS: menu button -#: src/include/dhcp-server/dns-server-management.rb:943 +#. TRANSLATORS: menu button +#: src/include/dhcp-server/dns-server-management.rb:943 msgid "&Special Tasks" msgstr "특수 업무(&S)" -#. TRANSLATORS: menu entry -#: src/include/dhcp-server/dns-server-management.rb:951 +#. TRANSLATORS: menu entry +#: src/include/dhcp-server/dns-server-management.rb:951 msgid "Add New Range of DNS Records" msgstr "새 DNS 레코드 범위 추가" -#. TRANSLATORS: menu entry -#: src/include/dhcp-server/dns-server-management.rb:957 +#. TRANSLATORS: menu entry +#: src/include/dhcp-server/dns-server-management.rb:957 msgid "Run Wizard to Rewrite the DNS Zone from Scratch" msgstr "마법사를 실행해 아무 것도 없는 상태에서 DNS 영역을 다시 씀 " -#. TRANSLATORS: checkbox, %1 is a zone name -#: src/include/dhcp-server/dns-server-management.rb:1029 +#. TRANSLATORS: checkbox, %1 is a zone name +#: src/include/dhcp-server/dns-server-management.rb:1029 msgid "Synchronize with Reverse Zone %1" msgstr "%1 역방향 영역과 동기화" -#. TRANSLATORS: dialog caption -#: src/include/dhcp-server/dns-server-management.rb:1082 +#. TRANSLATORS: dialog caption +#: src/include/dhcp-server/dns-server-management.rb:1082 msgid "DHCP Server: DNS Server Synchronization" msgstr "DHCP 서버: DNS 서버 동기화" -#. TRANSLATORS: Popup headline -#: src/include/dhcp-server/dns-server-wizard.rb:56 +#. TRANSLATORS: Popup headline +#: src/include/dhcp-server/dns-server-wizard.rb:56 msgid "Aborting the Wizard" msgstr "마법사 중단" -#. TRANSLATORS: Popup question -#: src/include/dhcp-server/dns-server-wizard.rb:58 +#. TRANSLATORS: Popup question +#: src/include/dhcp-server/dns-server-wizard.rb:58 msgid "" "All changes made in the wizard will be lost.\n" "Really abort?\n" @@ -1399,43 +1382,41 @@ "마법사의 모든 변경 내용을 잃게 됩니다.\n" "중단하시겠습니까?\n" -#. TRANSLATORS: dialog frame label -#: src/include/dhcp-server/dns-server-wizard.rb:121 +#. TRANSLATORS: dialog frame label +#: src/include/dhcp-server/dns-server-wizard.rb:121 msgid "Add a New Name Server" msgstr "새 이름 서버 추가" -#. TRANSLATORS: dialgo frame label -#: src/include/dhcp-server/dns-server-wizard.rb:128 +#. TRANSLATORS: dialgo frame label +#: src/include/dhcp-server/dns-server-wizard.rb:128 msgid "Edit Name Server" msgstr "이름 서버 편집" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-wizard.rb:150 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-wizard.rb:150 msgid "Server &IP" msgstr "서버 IP(&I)" -#. TRANSLATORS: popup question -#: src/include/dhcp-server/dns-server-wizard.rb:234 +#. TRANSLATORS: popup question +#: src/include/dhcp-server/dns-server-wizard.rb:234 msgid "" "No IP address has been provided for a name server in the current DNS zone.\n" -"This may not work because each zone needs the name and IP of its name server " -"defined. \n" +"This may not work because each zone needs the name and IP of its name server defined. \n" "Really use the current settings?\n" msgstr "" "현재 DNS 영역의 이름 서버에 대한 IP 주소가 제공되지 않았습니다.\n" -"각 영역에 이름 서버의 이름 및 IP가 정의되어 있어야 하므로 작동하지 않을 수 있" -"습니다. \n" +"각 영역에 이름 서버의 이름 및 IP가 정의되어 있어야 하므로 작동하지 않을 수 있습니다. \n" "현재 설정을 사용하시겠습니까?\n" -#. TRANSLATORS: popup error, %1 si a server name -#: src/include/dhcp-server/dns-server-wizard.rb:255 +#. TRANSLATORS: popup error, %1 si a server name +#: src/include/dhcp-server/dns-server-wizard.rb:255 msgid "Name server %1 already exists in the configuration." msgstr "%1 이름 서버는 구성에 이미 존재합니다." -#. TRANSLATORS: popup error -#. %1 the first IP address og 'another range' -#. %2 is the last one -#: src/include/dhcp-server/dns-server-wizard.rb:319 +#. TRANSLATORS: popup error +#. %1 the first IP address og 'another range' +#. %2 is the last one +#: src/include/dhcp-server/dns-server-wizard.rb:319 msgid "" "This new range of DNS entries is already covered by\n" "another one (%1-%2).\n" @@ -1445,204 +1426,204 @@ "포함되어 있습니다.\n" " 정말로 새 범위를 사용하시겠습니까?\n" -#. Adding new range definition -#: src/include/dhcp-server/dns-server-wizard.rb:428 +#. Adding new range definition +#: src/include/dhcp-server/dns-server-wizard.rb:428 msgid "At least one name server must be defined." msgstr "이름 서버를 최소한 하나 이상 정의해야 합니다." -#. TRANSLATORS: a dialog caption -#: src/include/dhcp-server/dns-server-wizard.rb:444 +#. TRANSLATORS: a dialog caption +#: src/include/dhcp-server/dns-server-wizard.rb:444 msgid "DHCP Server: New DNS Zone--Step 1 of 3" msgstr "DHCP 서버: 새 DNS 영역--3단계 중 1단계" -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-wizard.rb:455 -#: src/include/dhcp-server/dns-server-wizard.rb:505 -#: src/include/dhcp-server/dns-server-wizard.rb:562 +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-wizard.rb:455 +#: src/include/dhcp-server/dns-server-wizard.rb:505 +#: src/include/dhcp-server/dns-server-wizard.rb:562 msgid "New &Zone Name" msgstr "새 영역 이름(&Z)" -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-wizard.rb:460 -#: src/include/dhcp-server/dns-server-wizard.rb:510 -#: src/include/dhcp-server/dns-server-wizard.rb:567 +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-wizard.rb:460 +#: src/include/dhcp-server/dns-server-wizard.rb:510 +#: src/include/dhcp-server/dns-server-wizard.rb:567 msgid "&Current Network" msgstr "현재 네트워크(&C)" -#. TRANSLATORS: check box -#: src/include/dhcp-server/dns-server-wizard.rb:468 +#. TRANSLATORS: check box +#: src/include/dhcp-server/dns-server-wizard.rb:468 msgid "&Also Create Reverse Zone" msgstr "역방향 영역도 생성(&A)" -#. TRANSLATORS: a dialog caption -#: src/include/dhcp-server/dns-server-wizard.rb:494 +#. TRANSLATORS: a dialog caption +#: src/include/dhcp-server/dns-server-wizard.rb:494 msgid "DHCP Server: Zone Name Servers--Step 2 of 3" msgstr "DHCP 서버: 영역 이름 서버--3단계 중 2단계" -#. TRANSLATORS: table label -#: src/include/dhcp-server/dns-server-wizard.rb:518 +#. TRANSLATORS: table label +#: src/include/dhcp-server/dns-server-wizard.rb:518 msgid "Current Name Servers" msgstr "현재 이름 서버" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-wizard.rb:523 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-wizard.rb:523 msgid "Server Name" msgstr "서버 이름" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-wizard.rb:525 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-wizard.rb:525 msgid "IP (Optional)" msgstr "IP(선택 사항)" -#. TRANSLATORS: push button -#. TRANSLATORS: push button -#: src/include/dhcp-server/dns-server-wizard.rb:531 -#: src/include/dhcp-server/dns-server-wizard.rb:592 +#. TRANSLATORS: push button +#. TRANSLATORS: push button +#: src/include/dhcp-server/dns-server-wizard.rb:531 +#: src/include/dhcp-server/dns-server-wizard.rb:592 msgid "A&dd..." msgstr "추가(&D)..." -#. TRANSLATORS: push button -#. TRANSLATORS: push button -#: src/include/dhcp-server/dns-server-wizard.rb:533 -#: src/include/dhcp-server/dns-server-wizard.rb:594 +#. TRANSLATORS: push button +#. TRANSLATORS: push button +#: src/include/dhcp-server/dns-server-wizard.rb:533 +#: src/include/dhcp-server/dns-server-wizard.rb:594 msgid "&Edit..." msgstr "편집(&E)..." -#. TRANSLATORS: a dialog caption -#: src/include/dhcp-server/dns-server-wizard.rb:551 +#. TRANSLATORS: a dialog caption +#: src/include/dhcp-server/dns-server-wizard.rb:551 msgid "DHCP Server: DNS Records--Step 3 of 3" msgstr "DHCP 서버: DNS 레코드--3단계 중 3단계" -#. TRANSLATORS: table header label -#: src/include/dhcp-server/dns-server-wizard.rb:575 +#. TRANSLATORS: table header label +#: src/include/dhcp-server/dns-server-wizard.rb:575 msgid "DNS Records for DHCP Clients" msgstr "DHCP 클라이언트용 DNS 레코드" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-wizard.rb:580 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-wizard.rb:580 msgid "Hostname Base" msgstr "호스트 이름 기준" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-wizard.rb:582 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-wizard.rb:582 msgid "Number to Start With" msgstr "시작 번호" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-wizard.rb:584 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-wizard.rb:584 msgid "From IP" msgstr "보내는 IP" -#. TRANSLATORS: table header item -#: src/include/dhcp-server/dns-server-wizard.rb:586 +#. TRANSLATORS: table header item +#: src/include/dhcp-server/dns-server-wizard.rb:586 msgid "To IP" msgstr "받는 IP" -#. TRANSLATORS: a dialog caption -#: src/include/dhcp-server/dns-server-wizard.rb:612 +#. TRANSLATORS: a dialog caption +#: src/include/dhcp-server/dns-server-wizard.rb:612 msgid "DHCP Server: DNS Records--Summary" msgstr "DHCP 서버: DNS 레코드--요약" -#. TRANSLATORS: text entry -#: src/include/dhcp-server/dns-server-wizard.rb:641 +#. TRANSLATORS: text entry +#: src/include/dhcp-server/dns-server-wizard.rb:641 msgid "Re&verse Zone Name" msgstr "역방향 영역 이름(&V)" -#. TRANSLATORS: HTML summary item -#: src/include/dhcp-server/dns-server-wizard.rb:835 +#. TRANSLATORS: HTML summary item +#: src/include/dhcp-server/dns-server-wizard.rb:835 msgid "<b>Zone Name:</b> %1" msgstr "<b>영역 이름:</b> %1" -#. TRANSLATORS: HTML summary item -#. TRANSLATORS: HTML summary note -#: src/include/dhcp-server/dns-server-wizard.rb:844 -#: src/include/dhcp-server/dns-server-wizard.rb:867 +#. TRANSLATORS: HTML summary item +#. TRANSLATORS: HTML summary note +#: src/include/dhcp-server/dns-server-wizard.rb:844 +#: src/include/dhcp-server/dns-server-wizard.rb:867 msgid "(Replacing the current zone with the new one)" msgstr "(현재 영역을 새 영역으로 대체)" -#. TRANSLATORS: HTML summary item -#: src/include/dhcp-server/dns-server-wizard.rb:856 +#. TRANSLATORS: HTML summary item +#: src/include/dhcp-server/dns-server-wizard.rb:856 msgid "<b>Reverse Zone Name:</b> %1" msgstr "<b>역방향 영역 이름:</b> %1" -#. name servers -#. TRANSLATORS: html summary header -#: src/include/dhcp-server/dns-server-wizard.rb:877 +#. name servers +#. TRANSLATORS: html summary header +#: src/include/dhcp-server/dns-server-wizard.rb:877 msgid "Zone Name Servers:" msgstr "영역 이름 서버:" -#. TRANSLATORS: HTML summary item, %1 is a hostname, %2 is an IP address -#: src/include/dhcp-server/dns-server-wizard.rb:886 +#. TRANSLATORS: HTML summary item, %1 is a hostname, %2 is an IP address +#: src/include/dhcp-server/dns-server-wizard.rb:886 msgid "Hostname: %1, IP: %2" msgstr "호스트 이름: %1, IP: %2" -#. TRANSLATORS: IP address for the HTML summary item is not defined -#: src/include/dhcp-server/dns-server-wizard.rb:889 +#. TRANSLATORS: IP address for the HTML summary item is not defined +#: src/include/dhcp-server/dns-server-wizard.rb:889 msgid "Not defined" msgstr "정의되지 않음" -#. dhcp ranges -#. TRANSLATORS: HTML summary header -#: src/include/dhcp-server/dns-server-wizard.rb:900 +#. dhcp ranges +#. TRANSLATORS: HTML summary header +#: src/include/dhcp-server/dns-server-wizard.rb:900 msgid "Ranges of DNS Hosts:" msgstr "DNS 호스트 범위:" -#. TRANSLATORS: HTML summary item -#. %1 is the first IP of the range, %2 is the last one -#. %3 defines the hostname base (e.g., 'dhcp-%i') -#. %4 is a number 'start' used incremental replacement for '%i' -#: src/include/dhcp-server/dns-server-wizard.rb:912 +#. TRANSLATORS: HTML summary item +#. %1 is the first IP of the range, %2 is the last one +#. %3 defines the hostname base (e.g., 'dhcp-%i') +#. %4 is a number 'start' used incremental replacement for '%i' +#: src/include/dhcp-server/dns-server-wizard.rb:912 msgid "Range: %1-%2<br />Hostname Base: %3, Starting With: %4" msgstr "범위: %1-%2<br />호스트 이름 기준: %3, 시작 위치: %4" -#. TRANSLATORS: popup error -#: src/include/dhcp-server/dns-server-wizard.rb:1011 +#. TRANSLATORS: popup error +#: src/include/dhcp-server/dns-server-wizard.rb:1011 msgid "At least one DNS record must be set." msgstr "최소 한 개의 DNS 레코드를 설정해야 합니다." -#. TRANSLATORS: error message, %1 is a zone name -#. TRANSLATORS: error message, %1 is a reverse zone name -#: src/include/dhcp-server/dns-server-wizard.rb:1087 -#: src/include/dhcp-server/dns-server-wizard.rb:1197 +#. TRANSLATORS: error message, %1 is a zone name +#. TRANSLATORS: error message, %1 is a reverse zone name +#: src/include/dhcp-server/dns-server-wizard.rb:1087 +#: src/include/dhcp-server/dns-server-wizard.rb:1197 msgid "Cannot remove zone %1." msgstr "%1 영역을 제거할 수 없습니다." -#. TRANSLATORS: error message, %1 is a zone name -#. TRANSLATORS: error message, %1 is a zone name -#: src/include/dhcp-server/dns-server-wizard.rb:1151 -#: src/include/dhcp-server/dns-server-wizard.rb:1246 +#. TRANSLATORS: error message, %1 is a zone name +#. TRANSLATORS: error message, %1 is a zone name +#: src/include/dhcp-server/dns-server-wizard.rb:1151 +#: src/include/dhcp-server/dns-server-wizard.rb:1246 msgid "Cannot add name servers to zone %1." msgstr "%1 영역에 이름 서버를 추가할 수 없습니다." -#. TRANSLATORS: error message -#. TRANSLATORS: error message -#: src/include/dhcp-server/dns-server-wizard.rb:1172 -#: src/include/dhcp-server/dns-server-wizard.rb:1268 +#. TRANSLATORS: error message +#. TRANSLATORS: error message +#: src/include/dhcp-server/dns-server-wizard.rb:1172 +#: src/include/dhcp-server/dns-server-wizard.rb:1268 msgid "Cannot add zone DNS records." msgstr "영역 DNS 레코드를 추가할 수 없습니다." -#. TRANSLATORS: error message, %1 is a reverse zone name -#: src/include/dhcp-server/dns-server-wizard.rb:1218 +#. TRANSLATORS: error message, %1 is a reverse zone name +#: src/include/dhcp-server/dns-server-wizard.rb:1218 msgid "Cannot create reverse zone %1." msgstr "%1 역방향 영역을 만들 수 없습니다." -#. TRANSLATORS: busy message -#: src/include/dhcp-server/dns-server-wizard.rb:1279 +#. TRANSLATORS: busy message +#: src/include/dhcp-server/dns-server-wizard.rb:1279 msgid "Creating DNS zone..." msgstr "DNS 영역 작성 중..." -#. restore previous settings -#. TRANSLATORS: busy message -#: src/include/dhcp-server/dns-server-wizard.rb:1296 +#. restore previous settings +#. TRANSLATORS: busy message +#: src/include/dhcp-server/dns-server-wizard.rb:1296 msgid "Restoring previous DNS settings..." msgstr "이전 DNS 설정 복원 중..." -#. TRANSLATORS: popup question, %1 is a list of errors -#: src/include/dhcp-server/dns-server-wizard.rb:1307 +#. TRANSLATORS: popup question, %1 is a list of errors +#: src/include/dhcp-server/dns-server-wizard.rb:1307 msgid "" "Errors occurred during DNS zone creation:\n" "\n" @@ -1654,13 +1635,13 @@ "%1\n" "마법사로 돌아가시겠습니까?\n" -#. TRANSLATORS: popup message -#: src/include/dhcp-server/dns-server-wizard.rb:1326 +#. TRANSLATORS: popup message +#: src/include/dhcp-server/dns-server-wizard.rb:1326 msgid "The DNS zone was created successfully." msgstr "DNS 영역이 성공적으로 작성되었습니다." -#. help text 1/1 -#: src/include/dhcp-server/helps.rb:16 +#. help text 1/1 +#: src/include/dhcp-server/helps.rb:16 msgid "" "<p><b><big>Initializing DHCP Server Configuration</big></b><br>\n" "Please wait...</p>" @@ -1668,8 +1649,8 @@ "<p><b><big>DHCP 서버 구성 초기화 중</big></b><br>\n" "잠시 기다려 주십시오...</p>" -#. help text 1/1 -#: src/include/dhcp-server/helps.rb:20 +#. help text 1/1 +#: src/include/dhcp-server/helps.rb:20 msgid "" "<p><b><big>Saving DHCP Server Configuration</big></b><br>\n" "Please wait...</p>" @@ -1677,8 +1658,8 @@ "<p><b><big>DHCP 서버 구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...</p>" -#. help text 1/2 -#: src/include/dhcp-server/helps.rb:24 +#. help text 1/2 +#: src/include/dhcp-server/helps.rb:24 msgid "" "<p><b><big>Network Interfaces</big></b><br>\n" "Select the network interfaces to which the DHCP server should listen from\n" @@ -1688,8 +1669,8 @@ "<b>사용 가능한 인터페이스</b>에서 DHCP 서버가 수신할\n" "네트워크 인터페이스를 선택합니다.</p>" -#. help text 2/2 -#: src/include/dhcp-server/helps.rb:30 +#. help text 2/2 +#: src/include/dhcp-server/helps.rb:30 msgid "" "<p><b><big>Firewall Settings</big></b><br>\n" "To open the firewall to allow access to the service from \n" @@ -1705,8 +1686,8 @@ " 이 옵션은 방화벽이 활성화된 경우에만\n" " 사용할 수 있습니다.</p>" -#. help text 2/5 -#: src/include/dhcp-server/helps.rb:39 +#. help text 2/5 +#: src/include/dhcp-server/helps.rb:39 msgid "" "<p>\n" "To run the DHCP server in chroot jail, set\n" @@ -1715,12 +1696,11 @@ msgstr "" "<p>\n" "DHCP 서버를 chroot jail에서 실행하려면\n" -" <b>Chroot Jail에서 DHCP 서버 실행</b>을 설정합니다. chroot jail에서 아무 데" -"몬이나 시작하는\n" +" <b>Chroot Jail에서 DHCP 서버 실행</b>을 설정합니다. chroot jail에서 아무 데몬이나 시작하는\n" " 것이 더 안전하므로 이 방법을 권장합니다.</p>" -#. help text 3/5 -#: src/include/dhcp-server/helps.rb:46 +#. help text 3/5 +#: src/include/dhcp-server/helps.rb:46 msgid "" "<p>\n" "To store the DHCP configuration in LDAP,\n" @@ -1730,8 +1710,8 @@ "LDAP에 DHCP 구성을 저장하려면,\n" " <b>LDAP 지원</b>을 활성화합니다.</p>" -#. help text 4/5 -#: src/include/dhcp-server/helps.rb:52 +#. help text 4/5 +#: src/include/dhcp-server/helps.rb:52 msgid "" "<p><b>Configured Declarations</b> shows the configuration options in use.\n" "To modify an existing declaration, select it and click <b>Edit</b>.\n" @@ -1745,8 +1725,8 @@ " <b>추가</b>를 클릭합니다.\n" " 선언을 삭제하려면 해당 선언을 선택하고 <b>삭제</b>를 클릭합니다.</p>" -#. help text 5/5 -#: src/include/dhcp-server/helps.rb:60 +#. help text 5/5 +#: src/include/dhcp-server/helps.rb:60 msgid "" "<p><b><big>Advanced Functions</big></b><br>\n" "Use <b>Advanced</b> to display the log of the DHCP server,\n" @@ -1760,8 +1740,8 @@ " 사용할 수 있는 TSIG 키를 관리하려면 <b>고급</b>을\n" " 사용합니다.</p>" -#. help text 1/3, alt. 1 -#: src/include/dhcp-server/helps.rb:68 +#. help text 1/3, alt. 1 +#: src/include/dhcp-server/helps.rb:68 msgid "" "<p><b><big>Subnet Configuration</big></b><br>\n" "Set the <b>Network Address</b> and <b>Network Mask</b> of the subnet.</p>" @@ -1769,8 +1749,8 @@ "<p><b><big>서브넷 구성</big></b><br>\n" "서브넷의 <b>네트워크 주소</b> 및 <b>네트워크 마스크</b>를 설정합니다.</p>" -#. help text 1/3, alt. 1 -#: src/include/dhcp-server/helps.rb:72 +#. help text 1/3, alt. 1 +#: src/include/dhcp-server/helps.rb:72 msgid "" "<p><b><big>Host with Fixed Address</big></b><br>\n" "Set the name of the host for which to set the fixed address or other\n" @@ -1780,8 +1760,8 @@ "고정 주소를 설정할 호스트의 이름 또는 <b>호스트 이름</b>의\n" " 다른 특수 옵션을 설정합니다.</p>" -#. help text 1/3, alt. 3 -#: src/include/dhcp-server/helps.rb:78 +#. help text 1/3, alt. 3 +#: src/include/dhcp-server/helps.rb:78 msgid "" "<p><b><big>Group-Specific Options</big></b><br>\n" "Set the name of the group of declarations in <b>Group Name</b>. \n" @@ -1793,8 +1773,8 @@ " 이 이름은 사용자 개인의 식별을 위한 것이므로,\n" " DHCP 서버의 동작에 영향을 주지 않습니다.</p>" -#. help text 1/3, alt. 4 -#: src/include/dhcp-server/helps.rb:85 +#. help text 1/3, alt. 4 +#: src/include/dhcp-server/helps.rb:85 msgid "" "<p><b><big>Pool of Addresses</big></b><br>\n" "Set the name of the pool of addresses in <b>Pool Name</b>. \n" @@ -1806,8 +1786,8 @@ " 이 이름은 사용자 개인의 식별을 위한 것이므로,\n" " DHCP 서버의 동작에 영향을 주지 않습니다.</p>" -#. help text 1/3, alt. 5 -#: src/include/dhcp-server/helps.rb:92 +#. help text 1/3, alt. 5 +#: src/include/dhcp-server/helps.rb:92 msgid "" "<p><b><big>Shared Network</big></b><br>\n" "Set the name for the shared network in <b>Shared Network Name</b>. \n" @@ -1819,8 +1799,8 @@ " 이 이름은 사용자 개인의 식별을 위한 것이므로,\n" " DHCP 서버의 동작에 영향을 주지 않습니다.</p>" -#. help text 1/3, alt. 6 -#: src/include/dhcp-server/helps.rb:99 +#. help text 1/3, alt. 6 +#: src/include/dhcp-server/helps.rb:99 msgid "" "<p><b><big>Class</big></b><br>\n" "Set the name of the class of hosts in <b>Class Name</b>.</p>" @@ -1828,8 +1808,8 @@ "<p><b><big>클래스</big></b><br>\n" "<b>클래스 이름</b>에서 호스트 클래스의 이름을 설정합니다.</p>" -#. help text 2/3 -#: src/include/dhcp-server/helps.rb:103 +#. help text 2/3 +#: src/include/dhcp-server/helps.rb:103 msgid "" "<p>\n" "To edit DHCP options, choose the appropriate\n" @@ -1843,18 +1823,17 @@ " 새 옵션을 추가하려면 <b>추가</b>를 사용합니다. 옵션을 제거하려면\n" " 해당 옵션을 선택하고 <b>삭제</b>를 클릭합니다.</p>" -#. help text 3/3 -#: src/include/dhcp-server/helps.rb:111 +#. help text 3/3 +#: src/include/dhcp-server/helps.rb:111 msgid "" "<p>\n" "To adjust dynamic DNS for hosts of this subnet, use <b>Dynamic DNS</b>.</p>" msgstr "" "<p>\n" -"이 서브넷의 호스트에 대한 동적 DNS를 조정하려면 <b>동적 DNS</b>를 사용합니다." -"</p>" +"이 서브넷의 호스트에 대한 동적 DNS를 조정하려면 <b>동적 DNS</b>를 사용합니다.</p>" -#. help text 1/4 -#: src/include/dhcp-server/helps.rb:115 +#. help text 1/4 +#: src/include/dhcp-server/helps.rb:115 msgid "" "<p><b><big>Enabling Dynamic DNS</big></b><br>\n" "To enable Dynamic DNS updates for this subnet, set\n" @@ -1864,8 +1843,8 @@ "이 서브넷에 대해 동적 DNS 업데이트를 활성화하려면\n" "<b>이 서브넷에 대해 동적 DNS 활성화</b>를 설정합니다.</p>" -#. help text 2/4 -#: src/include/dhcp-server/helps.rb:121 +#. help text 2/4 +#: src/include/dhcp-server/helps.rb:121 msgid "" "<p><b><big>TSIG Key</big></b><br>\n" "To make Dynamic DNS updates, the authentication key must be set. Use\n" @@ -1879,8 +1858,8 @@ "이 키는 DHCP 서버와 DNS 서버 둘 다에 대해 같아야 합니다. 정방향 영역과\n" "역방향 영역에 대해 키를 지정하십시오.</p>" -#. help text 3/4 -#: src/include/dhcp-server/helps.rb:129 +#. help text 3/4 +#: src/include/dhcp-server/helps.rb:129 msgid "" "<p><b><big>Global DHCP Server Settings</big></b><br>\n" "Global settings of DHCP server must be updated to make Dynamic\n" @@ -1892,13 +1871,12 @@ "업데이트해야 합니다. 이 작업을 자동으로 수행하려면\n" "<b>동적 DNS 전역 설정 업데이트</b>를 설정합니다.</p>" -#. help text 4/4 -#: src/include/dhcp-server/helps.rb:136 +#. help text 4/4 +#: src/include/dhcp-server/helps.rb:136 msgid "" "<p><b><big>Zones to Update</big></b><br>\n" "Specify forward and reverse zones to update. For both, also specify \n" -"their primary name server. If the name server runs on the same host as the " -"DHCP\n" +"their primary name server. If the name server runs on the same host as the DHCP\n" "server, you can leave the fields empty.</p>" msgstr "" "<p><b><big>업데이트할 영역</big></b><br>\n" @@ -1906,36 +1884,30 @@ "주 이름 서버도 지정해야 합니다. 이름 서버가 DHCP 서버와\n" "같은 호스트에서 실행되는 경우 필드를 비워 둘 수 있습니다.</p>" -#. help text -#: src/include/dhcp-server/helps.rb:143 +#. help text +#: src/include/dhcp-server/helps.rb:143 msgid "" "<p><b><big>DHCP Server Start-Up Arguments</big></b><br>\n" -"Here you can specify parameters that you want DHCP Server to be started " -"with \n" -"(e.g. \"-p 1234\") for a non-standard port to listen on). For all possible " -"options,\n" +"Here you can specify parameters that you want DHCP Server to be started with \n" +"(e.g. \"-p 1234\") for a non-standard port to listen on). For all possible options,\n" "consult dhcpd manual page. If left blank, default values will be used.</p>" msgstr "" "<p><b><big>DHCP 서버 시작 인수</big></b><br>\n" -"여기에서 비표준 포트가 청취할 DHCP 서버가 시작되는 매개 변수(예: \"-p 1234\")" -"를 지정할 수 \n" +"여기에서 비표준 포트가 청취할 DHCP 서버가 시작되는 매개 변수(예: \"-p 1234\")를 지정할 수 \n" "있습니다. 사용할 수 있는 모든 옵션에\n" -" 대해서는 dhcpd 매뉴얼 페이지를 참조하십시오. 비워 두면 기본값이 사용됩니다." -"</p>" +" 대해서는 dhcpd 매뉴얼 페이지를 참조하십시오. 비워 두면 기본값이 사용됩니다.</p>" -#. Wizard Installation - Step 1 (version for expert UI) -#: src/include/dhcp-server/helps.rb:150 +#. Wizard Installation - Step 1 (version for expert UI) +#: src/include/dhcp-server/helps.rb:150 msgid "" "<p><b><big>Network Card Selection</big></b><br>\n" -"Select one or more of the listed network cards to use for the DHCP server.\n" +"Select one or more of the listed network cards to use for the DHCP server.</p>\n" msgstr "" "<p><b><big>네트워크 카드 선택</big></b><br>\n" -"나열된 네트워크 카드 중에서 DHCP 서버용으로 사용할 카드를 하나 이상 선택합니" -"다.</p>\n" +"나열된 네트워크 카드 중에서 DHCP 서버용으로 사용할 카드를 하나 이상 선택합니다.</p>\n" -#. Optional field - used with LDAP support -#: src/include/dhcp-server/helps.rb:154 +#. Optional field - used with LDAP support +#: src/include/dhcp-server/helps.rb:154 msgid "" "Optionally, you can also specify <b>DHCP Server Name</b>\n" "(the name of dhcpServer LDAP object), if it differs from your hostname.\n" @@ -1943,8 +1915,8 @@ "또는 호스트 이름과 다른 경우 <b>DHCP 서버 이름</b>\n" "(dhcpServer LDAP 객체의 이름)을 지정할 수도 있습니다.\n" -#. Wizard Installation - Step 2 1/9 -#: src/include/dhcp-server/helps.rb:158 +#. Wizard Installation - Step 2 1/9 +#: src/include/dhcp-server/helps.rb:158 msgid "" "<p><b><big>Global Settings</big></b><br>\n" "Here, make several DHCP settings.</p>" @@ -1952,9 +1924,9 @@ "<p><b><big>전역 설정</big></b><br>\n" "여기서는 몇몇 DHCP 설정을 지정할 수 있습니다.</p>" -#. Wizard Installation - Step 2 2/9 -#. Wizard Installation - Step 2 3/9 (2 is removed) -#: src/include/dhcp-server/helps.rb:165 +#. Wizard Installation - Step 2 2/9 +#. Wizard Installation - Step 2 3/9 (2 is removed) +#: src/include/dhcp-server/helps.rb:165 msgid "" "<p><b>Domain Name</b> sets the domain for which the DHCP server\n" "leases IPs to clients.</p>" @@ -1962,8 +1934,8 @@ "<p><b>도메인 이름</b>에서는 DHCP 서버가 클라이언트에게 IP를\n" "임대해주는 도메인을 설정합니다.</p>" -#. Wizard Installation - Step 2 4/9 -#: src/include/dhcp-server/helps.rb:169 +#. Wizard Installation - Step 2 4/9 +#: src/include/dhcp-server/helps.rb:169 msgid "" "<p><b>Primary Name Server IP</b> and <b>Secondary Name Server IP</b> \n" "offer these name servers to the DHCP clients.\n" @@ -1973,8 +1945,8 @@ "이러한 이름 서버를 DHCP 클라이언트에게 제공합니다.\n" " 값은 IP 주소이어야 합니다.</p>" -#. Wizard Installation - Step 2 5/9 -#: src/include/dhcp-server/helps.rb:175 +#. Wizard Installation - Step 2 5/9 +#: src/include/dhcp-server/helps.rb:175 msgid "" "<p><b>Default Gateway</b> inserts this\n" "value as the default route in the routing table of clients.</p>" @@ -1982,8 +1954,8 @@ "<p><b>기본 게이트웨이</b>는 이 값을\n" "기본 라우팅으로서 클라이언트의 라우팅 테이블에 삽입합니다.</p>" -#. Wizard Installation - Step 2 6/9 -#: src/include/dhcp-server/helps.rb:179 +#. Wizard Installation - Step 2 6/9 +#: src/include/dhcp-server/helps.rb:179 msgid "" "<p><b>Time Server</b> tells clients to use this server\n" "for time synchronization.</p>" @@ -1991,34 +1963,31 @@ "<p><b>시간 서버</b>는 시간 동기화를 위해 이 서버를\n" " 사용하도록 클라이언트에게 알려줍니다.</p>" -#. Wizard Installation - Step 2 7/9 -#: src/include/dhcp-server/helps.rb:183 -msgid "" -"<p><b>Print Server</b> offers this server as the default print server.</p>" +#. Wizard Installation - Step 2 7/9 +#: src/include/dhcp-server/helps.rb:183 +msgid "<p><b>Print Server</b> offers this server as the default print server.</p>" msgstr "<p><b>프린트 서버</b>는 이 서버를 기본 프린트 서버로 설정합니다.</p>" -#. Wizard Installation - Step 2 8/9 -#: src/include/dhcp-server/helps.rb:187 +#. Wizard Installation - Step 2 8/9 +#: src/include/dhcp-server/helps.rb:187 msgid "" "<p><b>WINS Server</b> offers this server as the WINS server\n" "(Windows Internet Naming Service).</p>" msgstr "" -"<p><b>WINS 서버</b>는 이 서버를 WINS(Windows Internet Naming Service) 서버" -"로\n" +"<p><b>WINS 서버</b>는 이 서버를 WINS(Windows Internet Naming Service) 서버로\n" "설정합니다.</p>" -#. Wizard Installation - Step 2 9/9 -#: src/include/dhcp-server/helps.rb:191 +#. Wizard Installation - Step 2 9/9 +#: src/include/dhcp-server/helps.rb:191 msgid "" -"<p><b>Default Lease Time</b> sets the time after which the leased IP " -"expires\n" +"<p><b>Default Lease Time</b> sets the time after which the leased IP expires\n" "and the client must ask for an IP again.</p>" msgstr "" "<p><b>기본 임대 시간</b>은 임대한 IP가 만료된 후 클라이언트가 IP를 다시\n" "요청해야 하는 시간을 설정합니다.</p>" -#. Wizard Installation - Step 3 1/4 -#: src/include/dhcp-server/helps.rb:195 +#. Wizard Installation - Step 3 1/4 +#: src/include/dhcp-server/helps.rb:195 msgid "" "<p><b><big>Subnet Information</big></b></br>\n" "View information about the current subnet, such as its address,\n" @@ -2030,28 +1999,25 @@ "현재 서브넷에 대한 정보를 표시합니다.\n" "</p>\n" -#. Wizard Installation - Step 3 2/4 -#: src/include/dhcp-server/helps.rb:202 +#. Wizard Installation - Step 3 2/4 +#: src/include/dhcp-server/helps.rb:202 msgid "" "<p><b><big>IP Address Range</big></b><br>\n" "Set the <b>First IP Address</b> and the <b>Last IP Address</b>\n" -"of the address range to be leased to clients. These addresses must have the " -"same netmask.\n" +"of the address range to be leased to clients. These addresses must have the same netmask.\n" "For instance, <tt>192.168.1.1</tt> and <tt>192.168.1.64</tt>. Check the <b>\n" "Allow Dynamic BOOTP</b> flag if the specified range may be dynamically\n" "assigned to BOOTP clients as well as DHCP clients</p>.\n" msgstr "" "<p><b><big>IP 주소 범위</big></b><br>\n" "클라이언트에게 임대될 주소 범위의 <b>첫 번째 IP 주소</b> 및\n" -"<b>마지막 IP 주소</b>를 설정하십시오. 이러한 주소는 동일한 서브넷을 사용해야 " -"합니다.\n" -"예를 들어 <tt>192.168.1.1</tt> 및 <tt>192.168.1.64</tt>입니다. 지정한 범위" -"가\n" +"<b>마지막 IP 주소</b>를 설정하십시오. 이러한 주소는 동일한 서브넷을 사용해야 합니다.\n" +"예를 들어 <tt>192.168.1.1</tt> 및 <tt>192.168.1.64</tt>입니다. 지정한 범위가\n" "BOOTP 클라이언트 및 DHCP 클라이언트에게 동적으로 할당될 수 있는 경우 <b>\n" "동적 BOOTP 허용</b> 플래그를 선택하십시오</p>.\n" -#. Wizard Installation - Step 3 3/4 -#: src/include/dhcp-server/helps.rb:211 +#. Wizard Installation - Step 3 3/4 +#: src/include/dhcp-server/helps.rb:211 msgid "" "<p><b><big>Lease Time</big></b><br>\n" "Set the <b>Default</b> lease time for the current IP address range,\n" @@ -2061,8 +2027,8 @@ "현재 사용 중인 IP 주소 범위의 <b>기본</b> 임대 시간을 설정하여\n" "클라이언트의 최적 IP 새로 고침 시간을 설정합니다.<br></p>" -#. Wizard Installation - Step 3 4/4 -#: src/include/dhcp-server/helps.rb:217 +#. Wizard Installation - Step 3 4/4 +#: src/include/dhcp-server/helps.rb:217 msgid "" "<p><b>Maximum</b> (optional value) sets the maximum time period\n" "for which this IP is blocked for the client on the DHCP server.</p>" @@ -2070,8 +2036,8 @@ "<p><b>최대</b>(옵션 값)는 DHCP 서버에서 클라이언트에 대해 IP가\n" "차단되는 최대 기간을 설정합니다.</p>" -#. Help text -#: src/include/dhcp-server/helps.rb:221 +#. Help text +#: src/include/dhcp-server/helps.rb:221 msgid "" "<p><b><big>Expert Configuration</big></b><br>\n" "To enter the complete configuration of the DHCP server, click\n" @@ -2081,18 +2047,17 @@ "DHCP 서버를 완벽하게 구성하려면 <b>DHCP 서버 고급 구성</b>을\n" " 클릭합니다.</p>" -#. host management help 1/3 -#: src/include/dhcp-server/helps.rb:227 +#. host management help 1/3 +#: src/include/dhcp-server/helps.rb:227 msgid "" "<p><b><big>Host Management</big></b><br>\n" "Use this dialog to edit hosts with static address binding.</p>" msgstr "" "<p><b><big>호스트 관리</big></b><br>\n" -"이 대화 상자를 사용하면 정적 주소 바인딩을 갖는 호스트를 편집할 수 있습니다." -"</p>" +"이 대화 상자를 사용하면 정적 주소 바인딩을 갖는 호스트를 편집할 수 있습니다.</p>" -#. host management help 1/3 -#: src/include/dhcp-server/helps.rb:231 +#. host management help 1/3 +#: src/include/dhcp-server/helps.rb:231 msgid "" "<p>To add a new new host, set its <b>Name</b>,\n" "<b>Hardware Address</b>, and <b>IP Address</b>\n" @@ -2106,20 +2071,18 @@ " <p>구성된 호스트를 수정하려면 테이블에서 해당 호스트를 선택하고\n" " 값을 변경한 다음 <b>목록에서 변경</b>을 클릭합니다.</p>" -#. host management help 1/3 -#: src/include/dhcp-server/helps.rb:239 +#. host management help 1/3 +#: src/include/dhcp-server/helps.rb:239 msgid "<p>To remove a host, select it and click <b>Delete from List</b>.</p>" -msgstr "" -"<p>호스트를 제거하려면 해당 호스트를 선택한 다음 <b>목록에서 삭제</b>를 클릭" -"합니다.</p>" +msgstr "<p>호스트를 제거하려면 해당 호스트를 선택한 다음 <b>목록에서 삭제</b>를 클릭합니다.</p>" -#. help text 1/7 -#: src/include/dhcp-server/helps.rb:251 +#. help text 1/7 +#: src/include/dhcp-server/helps.rb:251 msgid "<p>Select the type of declaration to add.</p>" msgstr "<p>추가할 선언 형식을 선택합니다.</p>" -#. help text 2/7, optional -#: src/include/dhcp-server/helps.rb:257 +#. help text 2/7, optional +#: src/include/dhcp-server/helps.rb:257 msgid "" "<p>To add a network declaration,\n" "select <b>Subnet</b>.</p>" @@ -2127,8 +2090,8 @@ "<p>네트워크 선언을 추가하려면\n" "<b>서브넷</b>을 선택합니다.</p>" -#. help text 3/7, optional -#: src/include/dhcp-server/helps.rb:264 +#. help text 3/7, optional +#: src/include/dhcp-server/helps.rb:264 msgid "" "<p>To add a host that needs special parameters\n" "(usually a fixed address), select <b>Host</b>.</p>" @@ -2136,8 +2099,8 @@ "<p>특수 매개변수를 필요로 하는 호스트를 추가하려면\n" "(보통 고정 주소로 되어 있음) <b>호스트</b>를 선택합니다.</p>" -#. help text 4/7, optional -#: src/include/dhcp-server/helps.rb:273 +#. help text 4/7, optional +#: src/include/dhcp-server/helps.rb:273 msgid "" "<p>To add a shared network (physical network with\n" "multiple logical networks), select <b>Shared Network</b>.</p>" @@ -2145,8 +2108,8 @@ "<p>공유 네트워크(여러 논리 네트워크와 실제 네트워크)를\n" "추가하려면 <b>공유 네트워크</b>를 선택합니다.</p>" -#. help text 5/7, optional -#: src/include/dhcp-server/helps.rb:282 +#. help text 5/7, optional +#: src/include/dhcp-server/helps.rb:282 msgid "" "<p>To add a group of other declarations (usually\n" "if they should share some settings), select <b>Group</b>.</p>" @@ -2154,8 +2117,8 @@ "<p>일부 설정을 공유하는 다른 선언 그룹을\n" "추가하려면 <b>그룹</b>을 선택합니다.</p>" -#. help text 6/7, optional -#: src/include/dhcp-server/helps.rb:291 +#. help text 6/7, optional +#: src/include/dhcp-server/helps.rb:291 msgid "" "<p>To add a pool of addresses that will be treated\n" "differently than other address pools although they are in the same\n" @@ -2165,8 +2128,8 @@ "다르게 처리할 주소 풀을 추가하려면\n" "<b>주소 풀</b>을 선택합니다.</p>" -#. help text 7/7, optional -#: src/include/dhcp-server/helps.rb:302 +#. help text 7/7, optional +#: src/include/dhcp-server/helps.rb:302 msgid "" "<p>To create a condition class that can be used for\n" "handling clients differently depending on the class to which they belong,\n" @@ -2176,123 +2139,123 @@ "처리하기 위해 사용할 수 있는 조건 클래스를 작성하려면\n" " <b>클래스</b>를 선택합니다.</p>" -#. selection box -#. selection box -#. selection box -#: src/include/dhcp-server/options.rb:453 -#: src/include/dhcp-server/options.rb:474 -#: src/include/dhcp-server/options.rb:567 -#: src/include/dhcp-server/options.rb:780 -#: src/include/dhcp-server/options.rb:856 +#. selection box +#. selection box +#. selection box +#: src/include/dhcp-server/options.rb:453 +#: src/include/dhcp-server/options.rb:474 +#: src/include/dhcp-server/options.rb:567 +#: src/include/dhcp-server/options.rb:780 +#: src/include/dhcp-server/options.rb:856 msgid "A&ddresses" msgstr "주소(&D)" -#. popup message -#: src/include/dhcp-server/options.rb:469 +#. popup message +#: src/include/dhcp-server/options.rb:469 msgid "The entered address is not valid." msgstr "입력한 주소가 올바르지 않습니다." -#. message popup -#. message popup -#: src/include/dhcp-server/options.rb:489 -#: src/include/dhcp-server/options.rb:542 +#. message popup +#. message popup +#: src/include/dhcp-server/options.rb:489 +#: src/include/dhcp-server/options.rb:542 msgid "At least one address must be specified." msgstr "주소를 최소한 하나 이상 지정해야 합니다." -#. selection box -#. Handle the event on the popup -#. @param [Object] opt_id any option id -#. @param [String] key string option key -#. @param [Hash] event map event to be handled -#. selection box -#: src/include/dhcp-server/options.rb:511 -#: src/include/dhcp-server/options.rb:527 -#: src/include/dhcp-server/options.rb:818 +#. selection box +#. Handle the event on the popup +#. @param [Object] opt_id any option id +#. @param [String] key string option key +#. @param [Hash] event map event to be handled +#. selection box +#: src/include/dhcp-server/options.rb:511 +#: src/include/dhcp-server/options.rb:527 +#: src/include/dhcp-server/options.rb:818 msgid "&Values" msgstr "값(&U)" -#. message popup -#: src/include/dhcp-server/options.rb:562 +#. message popup +#: src/include/dhcp-server/options.rb:562 msgid "The entered addresses are not valid." msgstr "입력한 주소가 올바르지 않습니다." -#. message popup -#: src/include/dhcp-server/options.rb:582 +#. message popup +#: src/include/dhcp-server/options.rb:582 msgid "At least one address pair must be specified." msgstr "주소 쌍을 최소한 하나 이상 지정해야 합니다." -#. table item, means switched on -#. table item, means switched on -#: src/include/dhcp-server/options.rb:619 -#: src/include/dhcp-server/options.rb:660 +#. table item, means switched on +#. table item, means switched on +#: src/include/dhcp-server/options.rb:619 +#: src/include/dhcp-server/options.rb:660 msgid "On" msgstr "설정" -#. table item, means switched off -#. table item, means switched off -#: src/include/dhcp-server/options.rb:622 -#: src/include/dhcp-server/options.rb:663 +#. table item, means switched off +#. table item, means switched off +#: src/include/dhcp-server/options.rb:622 +#: src/include/dhcp-server/options.rb:663 msgid "Off" msgstr "해제" -#. popup message -#: src/include/dhcp-server/options.rb:693 +#. popup message +#: src/include/dhcp-server/options.rb:693 msgid "A value must be specified." msgstr "값을 지정해야 합니다." -#. text entry -#: src/include/dhcp-server/options.rb:785 +#. text entry +#: src/include/dhcp-server/options.rb:785 msgid "&New Address" msgstr "새 주소(&N)" -#. int field -#: src/include/dhcp-server/options.rb:823 +#. int field +#: src/include/dhcp-server/options.rb:823 msgid "&New Value" msgstr "새 값: " -#. label (in role of help text) -#: src/include/dhcp-server/options.rb:860 +#. label (in role of help text) +#: src/include/dhcp-server/options.rb:860 msgid "Separate multiple addresses with spaces." msgstr "공백을 사용하여 여러 주소를 구분하십시오." -#. push button -#: src/include/dhcp-server/options.rb:863 +#. push button +#: src/include/dhcp-server/options.rb:863 msgid "&Add Address Pair" msgstr "주소 쌍 추가(&A)" -#. popup message -#: src/include/dhcp-server/options.rb:1007 +#. popup message +#: src/include/dhcp-server/options.rb:1007 msgid "The lowest address must be lower than the highest one." msgstr "최하위 주소는 최상위 주소보다 낮아야 합니다." -#. label -- help text -#: src/include/dhcp-server/options.rb:1023 +#. label -- help text +#: src/include/dhcp-server/options.rb:1023 msgid "If you change this, also update the syslog configuration." msgstr "만약 이것을 변경한다면, 또한 syslog 설정을 업데이트해야 합니다." -#. combo box -#: src/include/dhcp-server/options.rb:1035 +#. combo box +#: src/include/dhcp-server/options.rb:1035 msgid "&Hardware Type" msgstr "하드웨어 형식(&H)" -#. test entry, MAC better not to be translated, -#. translation would decrease the understandability -#: src/include/dhcp-server/options.rb:1045 +#. test entry, MAC better not to be translated, +#. translation would decrease the understandability +#: src/include/dhcp-server/options.rb:1045 msgid "&MAC Address" msgstr "MAC 주소" -#. text entry -#: src/include/dhcp-server/options.rb:1088 +#. text entry +#: src/include/dhcp-server/options.rb:1088 msgid "&Lowest IP Address" msgstr "최하위 IP 주소(&L)" -#. text entry -#: src/include/dhcp-server/options.rb:1090 +#. text entry +#: src/include/dhcp-server/options.rb:1090 msgid "&Highest IP Address" msgstr "최상위 IP 주소(&H)" -#. Yes-No popup -#: src/include/dhcp-server/widgets.rb:191 +#. Yes-No popup +#: src/include/dhcp-server/widgets.rb:191 msgid "" "If you leave the DHCP server configuration without saving,\n" "all changes will be lost. Really leave?" @@ -2300,8 +2263,8 @@ "DHCP 서버 구성을 저장하지 않고 종료하면 모든 변경 사항을\n" "잃게 됩니다. 종료하시겠습니까?" -#. yes-no popup -#: src/include/dhcp-server/widgets.rb:311 +#. yes-no popup +#: src/include/dhcp-server/widgets.rb:311 msgid "" "The port in firewall is not open. The DHCP server\n" "will not be able to serve your network.\n" @@ -2311,8 +2274,8 @@ "네트워크에서 서비스를 제공하지 못합니다.\n" " 계속하시겠습니까?" -#. TRANSLATORS: popup error message, %1 is list of network interfaces -#: src/include/dhcp-server/widgets.rb:339 +#. TRANSLATORS: popup error message, %1 is list of network interfaces +#: src/include/dhcp-server/widgets.rb:339 msgid "" "The network interfaces listed below are not mentioned in any firewall zone.\n" "%1\n" @@ -2322,8 +2285,8 @@ "%1\n" " 영역에 할당하려면 YaST 방화벽 구성을 실행하십시오." -#. TRANSLATORS: popup error message, %1 a network interface name -#: src/include/dhcp-server/widgets.rb:354 +#. TRANSLATORS: popup error message, %1 a network interface name +#: src/include/dhcp-server/widgets.rb:354 msgid "" "Network interface %1 is not mentioned in any firewall zone.\n" "Run the YaST firewall configuration to assign it to a zone." @@ -2331,10 +2294,10 @@ "%1 네트워크 인터페이스는 어떤 방화벽 영역에도 할당되지 않았습니다.\n" "영역에 할당하려면 YaST 방화벽 구성을 실행하십시오." -#. popup message -#. popup message -#: src/include/dhcp-server/widgets.rb:374 -#: src/include/dhcp-server/widgets.rb:588 +#. popup message +#. popup message +#: src/include/dhcp-server/widgets.rb:374 +#: src/include/dhcp-server/widgets.rb:588 msgid "" "This function is not available during\n" "preparation for autoinstallation." @@ -2342,188 +2305,188 @@ "자동 설치를 준비하는 동안에는 이 기능을\n" "사용할 수 없습니다." -#. tree widget -#. tree widget -#: src/include/dhcp-server/widgets.rb:484 -#: src/include/dhcp-server/widgets.rb:1070 +#. tree widget +#. tree widget +#: src/include/dhcp-server/widgets.rb:484 +#: src/include/dhcp-server/widgets.rb:1070 msgid "&Configured Declarations" msgstr "구성된 선언(&C)" -#. push button -#: src/include/dhcp-server/widgets.rb:572 +#. push button +#: src/include/dhcp-server/widgets.rb:572 msgid "&Dynamic DNS" msgstr "동적 DNS(&D)" -#. combo box -#. combo box -#: src/include/dhcp-server/widgets.rb:668 -#: src/include/dhcp-server/widgets.rb:1213 +#. combo box +#. combo box +#: src/include/dhcp-server/widgets.rb:668 +#: src/include/dhcp-server/widgets.rb:1213 msgid "Forward Zone TSIG &Key" msgstr "정방향 영역 TSIG 키(&K)" -#. combo box -#. combo box -#: src/include/dhcp-server/widgets.rb:677 -#: src/include/dhcp-server/widgets.rb:1220 +#. combo box +#. combo box +#: src/include/dhcp-server/widgets.rb:677 +#: src/include/dhcp-server/widgets.rb:1220 msgid "Reverse Zone TSIG &Key" msgstr "역방향 영역 TSIG 키(&K)" -#. popup headline -#: src/include/dhcp-server/widgets.rb:798 +#. popup headline +#: src/include/dhcp-server/widgets.rb:798 msgid "Select File with Authentication Key" msgstr "인증 키가 있는 파일 선택" -#. FIXME CWM should be able to handle virtual widgets -#: src/include/dhcp-server/widgets.rb:1036 +#. FIXME CWM should be able to handle virtual widgets +#: src/include/dhcp-server/widgets.rb:1036 msgid "Apply Changes" msgstr "변경 사항 적용" -#. check box -#: src/include/dhcp-server/widgets.rb:1043 +#. check box +#: src/include/dhcp-server/widgets.rb:1043 msgid "&Run DHCP Server in Chroot Jail" msgstr "Chroot Jail에서 DHCP 서버 실행(&R)" -#: src/include/dhcp-server/widgets.rb:1093 +#: src/include/dhcp-server/widgets.rb:1093 msgid "Ad&vanced" msgstr "고급(&V)" -#. item of a menu button -#: src/include/dhcp-server/widgets.rb:1096 +#. item of a menu button +#: src/include/dhcp-server/widgets.rb:1096 msgid "Display &Log" msgstr "로그 표시(&L)..." -#. item of a menu button -#: src/include/dhcp-server/widgets.rb:1098 +#. item of a menu button +#: src/include/dhcp-server/widgets.rb:1098 msgid "&Interface Configuration" msgstr "인터페이스 구성(&I)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1110 +#. text entry +#: src/include/dhcp-server/widgets.rb:1110 msgid "&Network Address" msgstr "네트워크 주소(&N)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1112 +#. text entry +#: src/include/dhcp-server/widgets.rb:1112 msgid "Network &Mask" msgstr "네트워크 마스크" -#. text entry -#: src/include/dhcp-server/widgets.rb:1130 +#. text entry +#: src/include/dhcp-server/widgets.rb:1130 msgid "Group &Name" msgstr "그룹 이름(&N)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1138 +#. text entry +#: src/include/dhcp-server/widgets.rb:1138 msgid "Pool &Name" msgstr "풀 이름(&N)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1146 +#. text entry +#: src/include/dhcp-server/widgets.rb:1146 msgid "Shared Network &Name" msgstr "공유 네트워크 이름(&N)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1154 +#. text entry +#: src/include/dhcp-server/widgets.rb:1154 msgid "Class &Name" msgstr "클래스 이름" -#. multi selection box -#: src/include/dhcp-server/widgets.rb:1164 +#. multi selection box +#: src/include/dhcp-server/widgets.rb:1164 msgid "Available Interfaces" msgstr "사용 가능한 인터페이스" -#. check box -#: src/include/dhcp-server/widgets.rb:1179 +#. check box +#: src/include/dhcp-server/widgets.rb:1179 msgid "Open &Firewall for Selected Interfaces" msgstr "선택한 인터페이스에 대해 방화벽 열기(&F)" -#. check box -#: src/include/dhcp-server/widgets.rb:1205 +#. check box +#: src/include/dhcp-server/widgets.rb:1205 msgid "&Enable Dynamic DNS for This Subnet" msgstr "이 서브넷에 대해 동적 DNS 활성화(&E)" -#. check box -#: src/include/dhcp-server/widgets.rb:1227 +#. check box +#: src/include/dhcp-server/widgets.rb:1227 msgid "&Update Global Dynamic DNS Settings" msgstr "전역 동적 DNS 설정 업데이트(&U)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1237 +#. text entry +#: src/include/dhcp-server/widgets.rb:1237 msgid "&Zone" msgstr "영역" -#. text entry -#: src/include/dhcp-server/widgets.rb:1264 +#. text entry +#: src/include/dhcp-server/widgets.rb:1264 msgid "&Primary DNS Server" msgstr "주 DNS 서버(&P)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1270 +#. text entry +#: src/include/dhcp-server/widgets.rb:1270 msgid "Re&verse Zone" msgstr "역방향 영역(&V)" -#. text entry -#: src/include/dhcp-server/widgets.rb:1279 +#. text entry +#: src/include/dhcp-server/widgets.rb:1279 msgid "Pr&imary DNS Server" msgstr "주 DNS 서버(&I)" -#. push button -#: src/include/dhcp-server/widgets.rb:1309 +#. push button +#: src/include/dhcp-server/widgets.rb:1309 msgid "DHCP Server &Expert Configuration..." msgstr "DHCP 서버 고급 구성(&E)..." -#. Dhcp-server read dialog caption -#: src/modules/DhcpServer.pm:1401 +#. Dhcp-server read dialog caption +#: src/modules/DhcpServer.pm:1401 msgid "Initializing DHCP Server Configuration" msgstr "DHCP 서버 설정 초기화" -#. progress stage -#: src/modules/DhcpServer.pm:1405 +#. progress stage +#: src/modules/DhcpServer.pm:1405 msgid "Check the environment" msgstr "환경 검사." -#. progress stage -#: src/modules/DhcpServer.pm:1407 +#. progress stage +#: src/modules/DhcpServer.pm:1407 msgid "Read firewall settings" msgstr "방화벽 구성 읽기" -#. progress stage -#: src/modules/DhcpServer.pm:1409 +#. progress stage +#: src/modules/DhcpServer.pm:1409 msgid "Read DHCP server settings" msgstr "DHCP 서버 설정 읽기" -#. progress stage -#: src/modules/DhcpServer.pm:1411 +#. progress stage +#: src/modules/DhcpServer.pm:1411 msgid "Read DNS server settings" msgstr "DNS 서버 설정 읽기" -#. progress step -#: src/modules/DhcpServer.pm:1415 +#. progress step +#: src/modules/DhcpServer.pm:1415 msgid "Checking the environment..." msgstr "환경 검사중..." -#. progress step -#: src/modules/DhcpServer.pm:1417 +#. progress step +#: src/modules/DhcpServer.pm:1417 msgid "Reading firewall settings..." msgstr "방화벽 설정 불러오는 중..." -#. progress step -#: src/modules/DhcpServer.pm:1419 +#. progress step +#: src/modules/DhcpServer.pm:1419 msgid "Reading DHCP server settings..." msgstr "DHCP 서버 설정 읽는 중..." -#. progress step -#: src/modules/DhcpServer.pm:1421 +#. progress step +#: src/modules/DhcpServer.pm:1421 msgid "Reading DNS server settings..." msgstr "DNS 서버 설정 읽는 중..." -#. progress step -#: src/modules/DhcpServer.pm:1423 src/modules/DhcpServer.pm:1651 +#. progress step +#: src/modules/DhcpServer.pm:1423 src/modules/DhcpServer.pm:1651 msgid "Finished" msgstr "완료됨" -#. TRANSLATORS: error report popup -#: src/modules/DhcpServer.pm:1453 +#. TRANSLATORS: error report popup +#: src/modules/DhcpServer.pm:1453 msgid "" "This server needs at least one\n" "configured network device (besides loopback) to\n" @@ -2539,8 +2502,8 @@ " \n" " 지금 중단합니다." -#. error report -#: src/modules/DhcpServer.pm:1488 +#. error report +#: src/modules/DhcpServer.pm:1488 msgid "" "Cannot determine hostname. LDAP-based configuration of \n" "DHCP server will not be available." @@ -2548,8 +2511,8 @@ "호스트 이름을 확인할 수 없습니다. DHCP 서버의 LDAP 기반 구성을\n" "수행할 수 없습니다." -#. yes-no popup -#: src/modules/DhcpServer.pm:1556 +#. yes-no popup +#: src/modules/DhcpServer.pm:1556 msgid "" "The DHCP server does not seem to have been\n" "configured yet. Create a new configuration?" @@ -2557,111 +2520,111 @@ "DHCP 서버가 아직 구성되지 않은 것 같습니다.\n" "새 구성을 만드시겠습니까?" -#. Dhcp-server read dialog caption */ -#: src/modules/DhcpServer.pm:1629 +#. Dhcp-server read dialog caption */ +#: src/modules/DhcpServer.pm:1629 msgid "Saving DHCP Server Configuration" msgstr "DHCP 서버 설정을 저장 중" -#. progress stage -#: src/modules/DhcpServer.pm:1634 +#. progress stage +#: src/modules/DhcpServer.pm:1634 msgid "Write DHCP server settings" msgstr "DHCP 서버 설정 쓰기" -#. progress stage -#: src/modules/DhcpServer.pm:1636 +#. progress stage +#: src/modules/DhcpServer.pm:1636 msgid "Write firewall settings" msgstr "방화벽 설정 저장" -#. progress stage -#: src/modules/DhcpServer.pm:1638 +#. progress stage +#: src/modules/DhcpServer.pm:1638 msgid "Restart DHCP server" msgstr "DHCP 서버 재시작" -#. progress stage -#: src/modules/DhcpServer.pm:1640 +#. progress stage +#: src/modules/DhcpServer.pm:1640 msgid "Write DNS server settings" msgstr "DNS 서버 설정 쓰기" -#. progress step -#: src/modules/DhcpServer.pm:1643 +#. progress step +#: src/modules/DhcpServer.pm:1643 msgid "Writing DHCP server settings..." msgstr "DHCP 서버 설정 쓰는 중..." -#. progress step -#: src/modules/DhcpServer.pm:1645 +#. progress step +#: src/modules/DhcpServer.pm:1645 msgid "Writing firewall settings..." msgstr "방화벽 설정 저장 중..." -#. progress step -#: src/modules/DhcpServer.pm:1647 +#. progress step +#: src/modules/DhcpServer.pm:1647 msgid "Restarting DHCP server..." msgstr "DHCP 서버를 재시작하는 중..." -#. progress step -#: src/modules/DhcpServer.pm:1649 +#. progress step +#: src/modules/DhcpServer.pm:1649 msgid "Writing DNS server settings..." msgstr "DNS 서버 설정 쓰는 중..." -#. error report -#: src/modules/DhcpServer.pm:1762 +#. error report +#: src/modules/DhcpServer.pm:1762 msgid "Error occurred while restarting the DHCP daemon." msgstr "DHCP 데몬을 재시작하는 동안 오류가 발생했습니다." -#. summary string -#: src/modules/DhcpServer.pm:1901 +#. summary string +#: src/modules/DhcpServer.pm:1901 msgid "The DHCP server is started at boot time" msgstr "DHCP 서버는 부팅 시 시작됩니다." -#. summary string -#: src/modules/DhcpServer.pm:1906 +#. summary string +#: src/modules/DhcpServer.pm:1906 msgid "The DHCP server is not started at boot time" msgstr "DHCP 서버는 부팅 시 시작되지 않습니다." -#. summary string, %1 is list of network interfaces -#: src/modules/DhcpServer.pm:1914 +#. summary string, %1 is list of network interfaces +#: src/modules/DhcpServer.pm:1914 msgid "Listen On: %1" msgstr "수신 대기: %1" -#. summary string, %1 is IP address range -#: src/modules/DhcpServer.pm:1933 +#. summary string, %1 is IP address range +#: src/modules/DhcpServer.pm:1933 msgid "Dynamic Address Range: %1" msgstr "동적 주소 범위: %1" -#. error message -#: src/modules/DhcpServer.pm:2328 +#. error message +#: src/modules/DhcpServer.pm:2328 msgid "Invalid LDAP configuration. Cannot use LDAP." msgstr "LDAP 구성이 잘못되었습니다. LDAP를 사용할 수 없습니다." -#. error report -#: src/modules/DhcpServer.pm:2568 src/modules/DhcpServer.pm:2609 +#. error report +#: src/modules/DhcpServer.pm:2568 src/modules/DhcpServer.pm:2609 msgid "Support for multiple dhcpServiceDN not implemented." msgstr "여러 dhcpServiceDN에 대한 지원이 구현되지 않았습니다." -#. error report -#: src/modules/DhcpServer.pm:2574 +#. error report +#: src/modules/DhcpServer.pm:2574 msgid "DHCP service DN is not defined." msgstr "DHCP 서비스 DN이 정의되지 않았습니다." -#. %1 is LDAP record key -#. Error report, %1 is LDAP record key -#. Error report -#. error report, %1 is LDAP record key -#: src/modules/DhcpServer.pm:2689 src/modules/DhcpServer.pm:2723 -#: src/modules/DhcpServer.pm:2787 src/modules/DhcpServer.pm:2862 +#. %1 is LDAP record key +#. Error report, %1 is LDAP record key +#. Error report +#. error report, %1 is LDAP record key +#: src/modules/DhcpServer.pm:2689 src/modules/DhcpServer.pm:2723 +#: src/modules/DhcpServer.pm:2787 src/modules/DhcpServer.pm:2862 msgid "Error occurred while creating %1." msgstr "%1을(를) 생성하는 동안 오류가 발생했습니다." -#. error report, %1 is LDAP record key -#: src/modules/DhcpServer.pm:2754 +#. error report, %1 is LDAP record key +#: src/modules/DhcpServer.pm:2754 msgid "Error occurred while updating %1." msgstr "%1을(를) 업데이트하는 동안 오류가 발생했습니다." -#. error report, %1=ldap domain, %2=dhcp server -#: src/modules/DhcpServer.pm:2825 +#. error report, %1=ldap domain, %2=dhcp server +#: src/modules/DhcpServer.pm:2825 msgid "Error occurred while creating cn=%2,ou=DHCP,%1." msgstr "cn=%2,ou=DHCP,%1을(를) 생성하는 동안 오류가 발생했습니다." -#. error report, /etc/dhcpd.conf is filename -#: src/modules/DhcpServer.pm:2922 +#. error report, /etc/dhcpd.conf is filename +#: src/modules/DhcpServer.pm:2922 msgid "Error occurred while writing /etc/dhcpd.conf." msgstr "/etc/dhcpd.conf를 쓰는 동안 오류가 발생했습니다." Modified: branches/SLE12-SP3/yast/ko/po/dns-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/dns-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/dns-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,682 +14,671 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. TRANSLATORS: commandline general name of the module in help -#: src/include/dns-server/cmdline.rb:24 +#. TRANSLATORS: commandline general name of the module in help +#: src/include/dns-server/cmdline.rb:24 msgid "DNS server configuration" msgstr "DNS 서버 구성" -#: src/include/dns-server/cmdline.rb:32 +#: src/include/dns-server/cmdline.rb:32 msgid "Start-up settings" msgstr "시작 설정" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:38 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:38 msgid "DNS forwarders" msgstr "DNS 전달자" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:50 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:50 msgid "Logging settings" msgstr "로깅 설정" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:63 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:63 msgid "DNS zones" msgstr "DNS 영역" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:79 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:79 msgid "Access control lists" msgstr "액세스 제어 목록" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:87 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:87 msgid "Zone transport rules" msgstr "영역 전송 규칙" -#. TRANSLATORS: commandline short help for command, base cmdline command -#: src/include/dns-server/cmdline.rb:102 +#. TRANSLATORS: commandline short help for command, base cmdline command +#: src/include/dns-server/cmdline.rb:102 msgid "Zone name servers" msgstr "영역 이름 서버" -#. TRANSLATORS: commandline short help for command, base cmdline command -#: src/include/dns-server/cmdline.rb:119 +#. TRANSLATORS: commandline short help for command, base cmdline command +#: src/include/dns-server/cmdline.rb:119 msgid "Zone mail servers" msgstr "영역 메일 서버" -#. TRANSLATORS: commandline short help for command, base cmdline command -#: src/include/dns-server/cmdline.rb:133 +#. TRANSLATORS: commandline short help for command, base cmdline command +#: src/include/dns-server/cmdline.rb:133 msgid "Start of authority (SOA)" msgstr "권한 시작(SOA)" -#. TRANSLATORS: commandline short help for command, base cmdline command -#: src/include/dns-server/cmdline.rb:148 +#. TRANSLATORS: commandline short help for command, base cmdline command +#: src/include/dns-server/cmdline.rb:148 msgid "Zone resource records, such as A, CNAME, NS, MX, or PTR" msgstr "A, CNAME, NS, MX 또는 PTR과 같은 영역 리소스 레코드" -#. TRANSLATORS: commandline short help for command, base cmdline command, A is record type -#: src/include/dns-server/cmdline.rb:166 +#. TRANSLATORS: commandline short help for command, base cmdline command, A is record type +#: src/include/dns-server/cmdline.rb:166 msgid "Handles A and corresponding PTR record at once" msgstr "A 및 해당 PTR 레코드를 동시에 처리" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:180 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:180 msgid "Show current settings" msgstr "현재 설정 표시" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:186 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:186 msgid "Start DNS server in the boot process" msgstr "부팅 과정 중에 DNS 서버 시작" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:192 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:192 msgid "Start DNS server manually" msgstr "수동으로 DNS 서버 시작" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:198 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:198 msgid "Add a new record" msgstr "새 레코드 추가" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:204 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:204 msgid "Remove a record" msgstr "레코드 제거" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:211 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:211 msgid "IPv4 address" msgstr "IPv4 주소" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:218 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:218 msgid "Logging destination (syslog|file)" msgstr "로깅 대상(syslog|파일)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:224 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:224 msgid "Set option" msgstr "옵션 설정" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:231 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:231 msgid "Filename for logging (full path)" msgstr "로깅을 위한 파일 이름(전체 경로)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:238 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:238 msgid "Maximum log size [0-9]+(KMG)*" msgstr "최대 로그 크기 [0-9]+(KMG)*" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:245 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:245 msgid "Maximum number of versions for rotation, '0' means no rotation" msgstr "순환할 최대 버전 수('0'은 순환이 없음을 의미함)" -#. TRANSLATORS: commandline short help for command -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:252 -#: src/include/dns-server/cmdline.rb:273 +#. TRANSLATORS: commandline short help for command +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:252 src/include/dns-server/cmdline.rb:273 msgid "Zone name" msgstr "영역 이름" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:259 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:259 msgid "Zone type, master or slave" msgstr "영역 형식, 마스터 또는 슬레이브" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:266 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:266 msgid "DNS zone master server" msgstr "DNS 영역 마스터 서버" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:280 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:280 msgid "Enable option" msgstr "옵션 활성화" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:287 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:287 msgid "Disable option" msgstr "옵션 비활성화" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:294 -msgid "" -"Name server (in fully qualified format finished with a dot or relative name)" +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:294 +msgid "Name server (in fully qualified format finished with a dot or relative name)" msgstr "이름 서버(점 또는 상대적인 이름으로 끝나는 정규화된 형식)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:301 -msgid "" -"Mail server (in fully qualified format finished with a dot or relative name)" +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:301 +msgid "Mail server (in fully qualified format finished with a dot or relative name)" msgstr "메일 서버(점 또는 상대적인 이름으로 끝나는 정규화된 형식)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:308 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:308 msgid "Mail server priority (number from 0 to 65535)" msgstr "메일 서버 우선 순위(0에서 65535 사이의 숫자)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:315 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:315 msgid "Serial number of zone update" msgstr "영역 업데이트의 일련 번호" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:322 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:322 msgid "General time to live of records in zone" msgstr "영역에 있는 레코드의 일반 TTL" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:329 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:329 msgid "An interval before the zone records should be refreshed" msgstr "영역 레코드를 새로 고치기 전의 간격" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:336 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:336 msgid "Interval between retries of failed refresh" msgstr "실패한 새로 고침 재시도 간격" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:343 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:343 msgid "Interval after which zone records are no longer authoritative" msgstr "영역 레코드를 더 이상 신뢰할 수 없는 간격" -#. TRANSLATORS: commandline short help for command, TTL is DNS-Specific (Time to Live), shouldn't be translated -#: src/include/dns-server/cmdline.rb:350 +#. TRANSLATORS: commandline short help for command, TTL is DNS-Specific (Time to Live), shouldn't be translated +#: src/include/dns-server/cmdline.rb:350 msgid "Minimum TTL that should be exported with records in this zone" msgstr "이 영역의 레코드와 함께 엑스포트해야 하는 최소 TTL" -#. TRANSLATORS: commandline short help for command, Types are DNS-Specific, cannot be translated -#: src/include/dns-server/cmdline.rb:357 +#. TRANSLATORS: commandline short help for command, Types are DNS-Specific, cannot be translated +#: src/include/dns-server/cmdline.rb:357 msgid "DNS resource record type, such as A, CNAME, NS, MX, or PTR" msgstr "A, CNAME, NS, MX 또는 PTR과 같은 DNS 리소스 레코드" -#. TRANSLATORS: commandline short help for command, DNS query is a question for value when we have a /key/ and type, ('A' record for 'example.org'? -> 192.0.34.166) -#: src/include/dns-server/cmdline.rb:364 +#. TRANSLATORS: commandline short help for command, DNS query is a question for value when we have a /key/ and type, ('A' record for 'example.org'? -> 192.0.34.166) +#: src/include/dns-server/cmdline.rb:364 msgid "DNS query, such as example.org for A record" msgstr "DNS 쿼리(예: A 레코드에 대한 example.org)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:371 -msgid "" -"DNS resource record value, such as 192.0.34.166 for example.org's A record" +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:371 +msgid "DNS resource record value, such as 192.0.34.166 for example.org's A record" msgstr "DNS 리소스 레코드 값(예: example.org의 A 레코드에 대한 192.0.34.166)" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:378 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:378 msgid "Hostname for the DNS record" msgstr "DNS 레코드에 대한 호스트 이름" -#. TRANSLATORS: commandline short help for command, %1 are possible untranlatable parameters "(yes|no)" -#: src/include/dns-server/cmdline.rb:386 +#. TRANSLATORS: commandline short help for command, %1 are possible untranlatable parameters "(yes|no)" +#: src/include/dns-server/cmdline.rb:386 msgid "Log named queries %1" msgstr "named 쿼리 기록 %1" -#. TRANSLATORS: commandline short help for command, %1 are possible untranlatable parameters "(yes|no)" -#: src/include/dns-server/cmdline.rb:394 +#. TRANSLATORS: commandline short help for command, %1 are possible untranlatable parameters "(yes|no)" +#: src/include/dns-server/cmdline.rb:394 msgid "Log zone updates %1" msgstr "영역 업데이트 기록 %1" -#. TRANSLATORS: commandline short help for command, %1 are possible untranlatable parameters "(yes|no)" -#: src/include/dns-server/cmdline.rb:402 +#. TRANSLATORS: commandline short help for command, %1 are possible untranlatable parameters "(yes|no)" +#: src/include/dns-server/cmdline.rb:402 msgid "Log zone transfers %1" msgstr "영역 전송 기록 %1" -#. TRANSLATORS: commandline short help for command -#: src/include/dns-server/cmdline.rb:409 +#. TRANSLATORS: commandline short help for command +#: src/include/dns-server/cmdline.rb:409 msgid "Comma-separated list of zone forwarders" msgstr "영역 전달자의 쉼표로 구분된 목록" -#. TRANSLATORS: command line error message, %1 is a missing required parameter -#: src/include/dns-server/cmdline.rb:494 +#. TRANSLATORS: command line error message, %1 is a missing required parameter +#: src/include/dns-server/cmdline.rb:494 msgid "Parameter %1 is required." msgstr "%1 매개변수가 필요합니다." -#. TRANSLATORS: command line error message, %1 is a parameter name -#: src/include/dns-server/cmdline.rb:507 +#. TRANSLATORS: command line error message, %1 is a parameter name +#: src/include/dns-server/cmdline.rb:507 msgid "Unknown value for parameter %1." msgstr "%1 매개변수에 대해 알 수 없는 값이 지정되었습니다." -#. TRANSLATORS: commandline section header -#. TRANSLATORS: commandline section header -#. TRANSLATORS: commandline section header -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:521 -#: src/include/dns-server/cmdline.rb:528 -#: src/include/dns-server/cmdline.rb:538 -#: src/include/dns-server/cmdline.rb:555 +#. TRANSLATORS: commandline section header +#. TRANSLATORS: commandline section header +#. TRANSLATORS: commandline section header +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:521 src/include/dns-server/cmdline.rb:528 +#: src/include/dns-server/cmdline.rb:538 src/include/dns-server/cmdline.rb:555 msgid "Start-Up Settings:" msgstr "시작 설정" -#. TRANSLATORS: commandline error message -#: src/include/dns-server/cmdline.rb:523 +#. TRANSLATORS: commandline error message +#: src/include/dns-server/cmdline.rb:523 msgid "Only one parameter is allowed." msgstr "하나의 매개변수만 사용할 수 있습니다." -#. TRANSLATORS: commandline progress information -#: src/include/dns-server/cmdline.rb:530 +#. TRANSLATORS: commandline progress information +#: src/include/dns-server/cmdline.rb:530 msgid "Enabling DNS server in the boot process..." msgstr "부팅 과정 중에 DNS 서버 활성화 중..." -#. TRANSLATORS: commandline progress information -#: src/include/dns-server/cmdline.rb:540 +#. TRANSLATORS: commandline progress information +#: src/include/dns-server/cmdline.rb:540 msgid "Removing DNS server from the boot process..." msgstr "부팅 과정에서 DNS 서버 제거 중..." -#. TRANSLATORS: commandline DNS service status information -#: src/include/dns-server/cmdline.rb:549 +#. TRANSLATORS: commandline DNS service status information +#: src/include/dns-server/cmdline.rb:549 msgid "DNS server is enabled in the boot process." msgstr "부팅 프로세스에서 DNS 서버가 활성화되었습니다." -#. TRANSLATORS: commandline DNS service status information -#: src/include/dns-server/cmdline.rb:552 +#. TRANSLATORS: commandline DNS service status information +#: src/include/dns-server/cmdline.rb:552 msgid "DNS server needs manual starting." msgstr "DNS 서버를 수동으로 시작해야 합니다." -#. TRANSLATORS: commandline section header, -#: src/include/dns-server/cmdline.rb:573 +#. TRANSLATORS: commandline section header, +#: src/include/dns-server/cmdline.rb:573 msgid "Forwarding:" msgstr "전달:" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:575 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:575 msgid "Forwarder IP" msgstr "전달자 IP" -#. TRANSLATORS: commandline error message -#. Both Add and Remove defined => Error! -#: src/include/dns-server/cmdline.rb:580 -#: src/include/dns-server/cmdline.rb:867 -#: src/include/dns-server/cmdline.rb:999 -#: src/include/dns-server/cmdline.rb:1049 -#: src/include/dns-server/cmdline.rb:1108 -#: src/include/dns-server/cmdline.rb:1244 -#: src/include/dns-server/cmdline.rb:1303 +#. TRANSLATORS: commandline error message +#. Both Add and Remove defined => Error! +#: src/include/dns-server/cmdline.rb:580 src/include/dns-server/cmdline.rb:867 +#: src/include/dns-server/cmdline.rb:999 +#: src/include/dns-server/cmdline.rb:1049 +#: src/include/dns-server/cmdline.rb:1108 +#: src/include/dns-server/cmdline.rb:1244 +#: src/include/dns-server/cmdline.rb:1303 msgid "Only one action parameter is allowed." msgstr "하나의 작업 매개변수만 사용할 수 있습니다." -#. TRANSLATORS: commandline table item -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:651 -#: src/include/dns-server/cmdline.rb:661 +#. TRANSLATORS: commandline table item +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:651 src/include/dns-server/cmdline.rb:661 msgid "Logging destination" msgstr "로깅 대상" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:653 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:653 msgid "System log" msgstr "시스템 로그" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:663 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:663 msgid "File" msgstr "파일" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:671 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:671 msgid "Filename" msgstr "파일 이름" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:679 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:679 msgid "Maximum size" msgstr "최대 크기" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:687 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:687 msgid "Maximum versions" msgstr "최대 버전" -#. TRANSLATORS: commandline table item, do not translate named -#: src/include/dns-server/cmdline.rb:700 +#. TRANSLATORS: commandline table item, do not translate named +#: src/include/dns-server/cmdline.rb:700 msgid "Log named queries" msgstr "named 쿼리 기록" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:708 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:708 msgid "Log zone updates" msgstr "영역 업데이트 기록" -#. TRANSLATORS: commandline table item -#: src/include/dns-server/cmdline.rb:716 +#. TRANSLATORS: commandline table item +#: src/include/dns-server/cmdline.rb:716 msgid "Log zone transfers" msgstr "영역 전송 기록" -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:723 +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:723 msgid "Logging Settings:" msgstr "로깅 설정" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:729 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:729 msgid "Setting" msgstr "설정" -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. Table header item - basic-options listing -#. Table header item - ACL-options -#. Table menu item - Records listing -#: src/include/dns-server/cmdline.rb:731 -#: src/include/dns-server/cmdline.rb:743 -#: src/include/dns-server/cmdline.rb:944 -#: src/include/dns-server/cmdline.rb:1157 -#: src/include/dns-server/dialog-main.rb:766 -#: src/include/dns-server/dialog-main.rb:1359 -#: src/include/dns-server/dialog-masterzone.rb:1409 +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. Table header item - basic-options listing +#. Table header item - ACL-options +#. Table menu item - Records listing +#: src/include/dns-server/cmdline.rb:731 src/include/dns-server/cmdline.rb:743 +#: src/include/dns-server/cmdline.rb:944 +#: src/include/dns-server/cmdline.rb:1157 +#: src/include/dns-server/dialog-main.rb:766 +#: src/include/dns-server/dialog-main.rb:1359 +#: src/include/dns-server/dialog-masterzone.rb:1409 msgid "Value" msgstr "값" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:741 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:741 msgid "Logging Rule" msgstr "로깅 규칙" -#. TRANSLATORS: commandline section header, -#: src/include/dns-server/cmdline.rb:835 +#. TRANSLATORS: commandline section header, +#: src/include/dns-server/cmdline.rb:835 msgid "DNS Zones:" msgstr "DNS 영역:" -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. Textentry - DNS adding zone - Name -#: src/include/dns-server/cmdline.rb:840 -#: src/include/dns-server/cmdline.rb:940 -#: src/include/dns-server/dialog-main.rb:1593 +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. Textentry - DNS adding zone - Name +#: src/include/dns-server/cmdline.rb:840 src/include/dns-server/cmdline.rb:940 +#: src/include/dns-server/dialog-main.rb:1593 msgid "Name" msgstr "이름" -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. Combobox - DNS adding zone - Type -#. Table header item - DNS listing zones -#. Table menu item - Records listing -#: src/include/dns-server/cmdline.rb:842 -#: src/include/dns-server/cmdline.rb:942 -#: src/include/dns-server/dialog-main.rb:1599 -#: src/include/dns-server/dialog-main.rb:1641 -#: src/include/dns-server/dialog-masterzone.rb:1407 +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. Combobox - DNS adding zone - Type +#. Table header item - DNS listing zones +#. Table menu item - Records listing +#: src/include/dns-server/cmdline.rb:842 src/include/dns-server/cmdline.rb:942 +#: src/include/dns-server/dialog-main.rb:1599 +#: src/include/dns-server/dialog-main.rb:1641 +#: src/include/dns-server/dialog-masterzone.rb:1407 msgid "Type" msgstr "유형" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:844 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:844 msgid "Master Server" msgstr "마스터 서버" -#. TRANSLATORS: commandline table header item -#. Dialog Label - DNS - expert settings -#. Tree Menu Item - DNS - expert settings -#: src/include/dns-server/cmdline.rb:846 -#: src/include/dns-server/dialog-main.rb:1993 -#: src/include/dns-server/dialog-main.rb:1996 +#. TRANSLATORS: commandline table header item +#. Dialog Label - DNS - expert settings +#. Tree Menu Item - DNS - expert settings +#: src/include/dns-server/cmdline.rb:846 +#: src/include/dns-server/dialog-main.rb:1993 +#: src/include/dns-server/dialog-main.rb:1996 msgid "Forwarders" msgstr "전달자" -#. TRANSLATORS: table item - ACL type -#: src/include/dns-server/cmdline.rb:925 +#. TRANSLATORS: table item - ACL type +#: src/include/dns-server/cmdline.rb:925 msgid "Predefined" msgstr "사전 정의됨" -#. TRANSLATORS: table item - ACL type -#: src/include/dns-server/cmdline.rb:927 +#. TRANSLATORS: table item - ACL type +#: src/include/dns-server/cmdline.rb:927 msgid "Custom" msgstr "사용자 정의" -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:935 +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:935 msgid "ACLs:" msgstr "ACL:" -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:975 +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:975 msgid "Zone Transport:" msgstr "영역 전송:" -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. TRANSLATORS: commandline table header item -#. Table header item - DNS listing zones -#: src/include/dns-server/cmdline.rb:980 -#: src/include/dns-server/cmdline.rb:1032 -#: src/include/dns-server/cmdline.rb:1089 -#: src/include/dns-server/cmdline.rb:1220 -#: src/include/dns-server/cmdline.rb:1284 -#: src/include/dns-server/dialog-main.rb:1639 +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. TRANSLATORS: commandline table header item +#. Table header item - DNS listing zones +#: src/include/dns-server/cmdline.rb:980 +#: src/include/dns-server/cmdline.rb:1032 +#: src/include/dns-server/cmdline.rb:1089 +#: src/include/dns-server/cmdline.rb:1220 +#: src/include/dns-server/cmdline.rb:1284 +#: src/include/dns-server/dialog-main.rb:1639 msgid "Zone" msgstr "영역" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:982 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:982 msgid "Enabled ACL" msgstr "활성화된 ACL" -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:1027 +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:1027 msgid "Name Servers:" msgstr "이름 서버" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1034 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1034 msgid "Name Server" msgstr "이름 서버" -#. TRANSLATORS: commandline section header -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:1084 -#: src/include/dns-server/cmdline.rb:1215 +#. TRANSLATORS: commandline section header +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:1084 +#: src/include/dns-server/cmdline.rb:1215 msgid "Mail Servers:" msgstr "메일 서버:" -#. TRANSLATORS: commandline table header item -#. Table header item - listing mail servers -#: src/include/dns-server/cmdline.rb:1091 -#: src/include/dns-server/dialog-masterzone.rb:729 +#. TRANSLATORS: commandline table header item +#. Table header item - listing mail servers +#: src/include/dns-server/cmdline.rb:1091 +#: src/include/dns-server/dialog-masterzone.rb:729 msgid "Mail Server" msgstr "메일서버" -#. TRANSLATORS: commandline table header item -#. Table header item - listing mail servers -#: src/include/dns-server/cmdline.rb:1093 -#: src/include/dns-server/dialog-masterzone.rb:731 +#. TRANSLATORS: commandline table header item +#. Table header item - listing mail servers +#: src/include/dns-server/cmdline.rb:1093 +#: src/include/dns-server/dialog-masterzone.rb:731 msgid "Priority" msgstr "우선 순위" -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:1150 +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:1150 msgid "Start of Authority (SOA):" msgstr "권한 시작(SOA):" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1155 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1155 msgid "Key" msgstr "키(&K)" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1222 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1222 msgid "Record Query" msgstr "레코드 쿼리" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1224 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1224 msgid "Record Type" msgstr "레코드 형식" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1226 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1226 msgid "Record Value" msgstr "레코드 값" -#. TRANSLATORS: commandline section header -#: src/include/dns-server/cmdline.rb:1279 +#. TRANSLATORS: commandline section header +#: src/include/dns-server/cmdline.rb:1279 msgid "Hostname Record:" msgstr "호스트 이름 레코드:" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1286 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1286 msgid "Hostname" msgstr "호스트 이름" -#. TRANSLATORS: commandline table header item -#: src/include/dns-server/cmdline.rb:1288 +#. TRANSLATORS: commandline table header item +#: src/include/dns-server/cmdline.rb:1288 msgid "IP" msgstr "IP" -#. Dialog caption (before a colon) -#. Dialog caption (before a colon) -#. Dialog caption (before a colon) -#: src/include/dns-server/dialog-installwizard.rb:29 -#: src/include/dns-server/dialog-installwizard.rb:77 -#: src/include/dns-server/dialog-installwizard.rb:136 +#. Dialog caption (before a colon) +#. Dialog caption (before a colon) +#. Dialog caption (before a colon) +#: src/include/dns-server/dialog-installwizard.rb:29 +#: src/include/dns-server/dialog-installwizard.rb:77 +#: src/include/dns-server/dialog-installwizard.rb:136 msgid "DNS Server Installation" msgstr "DNS 서버 설치" -#. Dialog caption (after a colon) -#: src/include/dns-server/dialog-installwizard.rb:31 +#. Dialog caption (after a colon) +#: src/include/dns-server/dialog-installwizard.rb:31 msgid "Forwarder Settings" msgstr "전달자 설정" -#. Dialog caption (after a colon) -#. Dialog Label - DNS - expert settings -#. Tree Menu Item - DNS - expert settings -#: src/include/dns-server/dialog-installwizard.rb:79 -#: src/include/dns-server/dialog-main.rb:2067 -#: src/include/dns-server/dialog-main.rb:2070 +#. Dialog caption (after a colon) +#. Dialog Label - DNS - expert settings +#. Tree Menu Item - DNS - expert settings +#: src/include/dns-server/dialog-installwizard.rb:79 +#: src/include/dns-server/dialog-main.rb:2067 +#: src/include/dns-server/dialog-main.rb:2070 msgid "DNS Zones" msgstr "DNS 영역" -#. Dialog caption (after a colon) -#: src/include/dns-server/dialog-installwizard.rb:138 +#. Dialog caption (after a colon) +#: src/include/dns-server/dialog-installwizard.rb:138 msgid "Finish Wizard" msgstr "마법사 완료" -#. Rich Text Item - Installation overview -#: src/include/dns-server/dialog-installwizard.rb:152 +#. Rich Text Item - Installation overview +#: src/include/dns-server/dialog-installwizard.rb:152 msgid "<li>Forwarders: %1</li>" msgstr "<li>전달자: %1</li>" -#. Rich Text Item - Installation overview -#: src/include/dns-server/dialog-installwizard.rb:155 +#. Rich Text Item - Installation overview +#: src/include/dns-server/dialog-installwizard.rb:155 msgid "<li>Domains: %1</li>" msgstr "<li>도메인: %1</li>" -#. check box -#. TRANSLATORS: checkbox label, turning LDAP support on or off -#: src/include/dns-server/dialog-installwizard.rb:175 -#: src/include/dns-server/dialog-main.rb:2108 +#. check box +#. TRANSLATORS: checkbox label, turning LDAP support on or off +#: src/include/dns-server/dialog-installwizard.rb:175 +#: src/include/dns-server/dialog-main.rb:2108 msgid "&LDAP Support Active" msgstr "LDAP 지원 활성화(&L)" -#. Label for Radiobuttons - DNS starting -#: src/include/dns-server/dialog-installwizard.rb:188 +#. Label for Radiobuttons - DNS starting +#: src/include/dns-server/dialog-installwizard.rb:188 msgid "Start-up Behavior" msgstr "시작 동작" -#. Radiobutton label - DNS starting -#: src/include/dns-server/dialog-installwizard.rb:196 +#. Radiobutton label - DNS starting +#: src/include/dns-server/dialog-installwizard.rb:196 msgid "O&n: Start Now and When Booting" msgstr "설정(&N): 지금 시작 및 부팅 시" -#. Radiobutton label - DNS starting -#: src/include/dns-server/dialog-installwizard.rb:199 +#. Radiobutton label - DNS starting +#: src/include/dns-server/dialog-installwizard.rb:199 msgid "O&ff: Only Start Manually" msgstr "해제(&F): 수동으로만 시작" -#. Push Button - start expert configuration -#: src/include/dns-server/dialog-installwizard.rb:208 +#. Push Button - start expert configuration +#: src/include/dns-server/dialog-installwizard.rb:208 msgid "DNS Server &Expert Configuration..." msgstr "DNS 서버 고급 구성(&E)..." -#. Dialog label DNS - expert settings -#: src/include/dns-server/dialog-main.rb:256 +#. Dialog label DNS - expert settings +#: src/include/dns-server/dialog-main.rb:256 msgid "DNS Server" msgstr "DNS 서버" -#. T: ComboBox label -#: src/include/dns-server/dialog-main.rb:297 +#. T: ComboBox label +#: src/include/dns-server/dialog-main.rb:297 msgid "Local DNS Resolution &Policy" msgstr "로컬 DNS 확인 정책(&P)" -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:300 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:300 msgid "Merging forwarders is disabled" msgstr "전달자 병합이 비활성화되었습니다." -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:302 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:302 msgid "Automatic merging" msgstr "자동 병합" -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:304 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:304 msgid "Merging forwarders is enabled" msgstr "전달자 병합이 활성화되었습니다." -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:306 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:306 msgid "Custom configuration" msgstr "사용자 정의 구성" -#: src/include/dns-server/dialog-main.rb:310 +#: src/include/dns-server/dialog-main.rb:310 msgid "Custom policy" msgstr "사용자 정의 정책" -#. T: ComboBox label -#: src/include/dns-server/dialog-main.rb:317 +#. T: ComboBox label +#: src/include/dns-server/dialog-main.rb:317 msgid "Local DNS Resolution &Forwarder" msgstr "로컬 DNS 확인 전달자(&F)" -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:320 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:320 msgid "Using system name servers" msgstr "시스템 이름 서버 사용" -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:322 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:322 msgid "This name server (bind)" msgstr "이 이름 서버(바인드)" -#. T: ComboBox item -#: src/include/dns-server/dialog-main.rb:324 +#. T: ComboBox item +#: src/include/dns-server/dialog-main.rb:324 msgid "Local dnsmasq server" msgstr "로컬 dnsmasq 서버" -#. Frame label for DNS-Forwarders adding IP -#: src/include/dns-server/dialog-main.rb:334 +#. Frame label for DNS-Forwarders adding IP +#: src/include/dns-server/dialog-main.rb:334 msgid "Add IP Address" msgstr "IP 주소 추가" -#. Textentry for DNS-Forwarders adding IP -#: src/include/dns-server/dialog-main.rb:343 +#. Textentry for DNS-Forwarders adding IP +#: src/include/dns-server/dialog-main.rb:343 msgid "IPv4 or IPv6 A&ddress" msgstr "IPv4 또는 IPv6 주소(&D)" -#. Selectionbox for listing current DNS-Forwarders -#. Selectionbox for listing current DNS-Forwarders -#: src/include/dns-server/dialog-main.rb:372 -#: src/include/dns-server/dialog-main.rb:403 +#. Selectionbox for listing current DNS-Forwarders +#. Selectionbox for listing current DNS-Forwarders +#: src/include/dns-server/dialog-main.rb:372 +#: src/include/dns-server/dialog-main.rb:403 msgid "Forwarder &List" msgstr "전달자 목록(&L)" -#. Store settings of a tab of a dialog -#: src/include/dns-server/dialog-main.rb:547 +#. Store settings of a tab of a dialog +#: src/include/dns-server/dialog-main.rb:547 msgid "Cannot set local forwarder to %{forwarder}" msgstr "로컬 전달자를 %{forwarder}(으)로 설정할 수 없습니다." -#. An error message, %1 is replaced with a variable IP -#: src/include/dns-server/dialog-main.rb:611 +#. An error message, %1 is replaced with a variable IP +#: src/include/dns-server/dialog-main.rb:611 msgid "Cannot find local equivalent for IP %1." msgstr "IP %1에 동등한 로컬 항목을 찾을 수 없습니다." -#. TRANSLATORS: A warning message, %1 is replaced with the input IP, %2 with the output IP -#: src/include/dns-server/dialog-main.rb:617 +#. TRANSLATORS: A warning message, %1 is replaced with the input IP, %2 with the output IP +#: src/include/dns-server/dialog-main.rb:617 msgid "" "Forwarding DNS queries to itself would create an infinite loop.\n" "IP address %1 is currently used by this server, so it has\n" @@ -699,12 +688,12 @@ "IP 주소 %1은(는) 현재 이 서버에서 사용되므로, 로컬 동등 %2(으)로\n" "변경되었습니다." -#. both IPv4 and IPv6 -#: src/include/dns-server/dialog-main.rb:645 +#. both IPv4 and IPv6 +#: src/include/dns-server/dialog-main.rb:645 msgid "Invalid IPv4 or IPv6 address." msgstr "IPv4 또는 IPv6 주소가 잘못되었습니다." -#: src/include/dns-server/dialog-main.rb:648 +#: src/include/dns-server/dialog-main.rb:648 msgid "" "A valid IPv6 address consists of letters a-f, numbers,\n" "and colons." @@ -712,47 +701,47 @@ "유효한 IPv6 주소는 문자 a-f, 숫자 및 콜론으로\n" "구성됩니다." -#. error report -#: src/include/dns-server/dialog-main.rb:664 +#. error report +#: src/include/dns-server/dialog-main.rb:664 msgid "The specified forwarder is already present." msgstr "지정한 전달자는 이미 존재합니다." -#. Frame label for Basic-Options -#: src/include/dns-server/dialog-main.rb:693 +#. Frame label for Basic-Options +#: src/include/dns-server/dialog-main.rb:693 msgid "Add or Change Option" msgstr "옵션 추가 또는 변경" -#. Combobox for choosing the basic-option -#: src/include/dns-server/dialog-main.rb:707 +#. Combobox for choosing the basic-option +#: src/include/dns-server/dialog-main.rb:707 msgid "O&ption" msgstr "옵션" -#. Textentry for setting the basic-option value -#. Textentry - adding ACL-optiopn - value -#: src/include/dns-server/dialog-main.rb:717 -#: src/include/dns-server/dialog-main.rb:1322 +#. Textentry for setting the basic-option value +#. Textentry - adding ACL-optiopn - value +#: src/include/dns-server/dialog-main.rb:717 +#: src/include/dns-server/dialog-main.rb:1322 msgid "&Value" msgstr "값(&V)" -#. Pushbutton for changing the basic-option -#. Pushbutton - Change Record -#: src/include/dns-server/dialog-main.rb:741 -#: src/include/dns-server/dialog-masterzone.rb:1377 +#. Pushbutton for changing the basic-option +#. Pushbutton - Change Record +#: src/include/dns-server/dialog-main.rb:741 +#: src/include/dns-server/dialog-masterzone.rb:1377 msgid "C&hange" msgstr "변경(&C)" -#. Table label for basic-options listing -#: src/include/dns-server/dialog-main.rb:755 +#. Table label for basic-options listing +#: src/include/dns-server/dialog-main.rb:755 msgid "Current Options" msgstr "현재 옵션" -#. Table header item - basic-options listing -#: src/include/dns-server/dialog-main.rb:764 +#. Table header item - basic-options listing +#: src/include/dns-server/dialog-main.rb:764 msgid "Option" msgstr "옵션" -#. TRANSLATORS: Popup question -#: src/include/dns-server/dialog-main.rb:895 +#. TRANSLATORS: Popup question +#: src/include/dns-server/dialog-main.rb:895 msgid "" "Really set this\n" "option without any value?\n" @@ -760,8 +749,8 @@ "이 옵션을\n" "값 없이 설정하시겠습니까?\n" -#. TRANSLATORS: Popup question. Please, do not translate 'yes' and 'no' strings. %1 is a name of the option, %2 is the value of the option. -#: src/include/dns-server/dialog-main.rb:907 +#. TRANSLATORS: Popup question. Please, do not translate 'yes' and 'no' strings. %1 is a name of the option, %2 is the value of the option. +#: src/include/dns-server/dialog-main.rb:907 msgid "" "Option %1 can only have a yes or no value set.\n" "Really set it to %2?\n" @@ -769,8 +758,8 @@ "%1 옵션은 yes 또는 no 값만 가질 수 있습니다.\n" "%2(으)로 설정하시겠습니까?\n" -#. TRANSLATORS: Popup question. %1 is a name of the option, %2 is the value of the option. -#: src/include/dns-server/dialog-main.rb:924 +#. TRANSLATORS: Popup question. %1 is a name of the option, %2 is the value of the option. +#: src/include/dns-server/dialog-main.rb:924 msgid "" "Option %1 can only be a number.\n" "Really set it to %2?\n" @@ -778,8 +767,8 @@ "%1 옵션에는 숫자만 사용할 수 있습니다.\n" "%2(으)로 설정하시겠습니까?\n" -#. TRANSLATORS: Popup question. %1 is the value of the option. -#: src/include/dns-server/dialog-main.rb:936 +#. TRANSLATORS: Popup question. %1 is the value of the option. +#: src/include/dns-server/dialog-main.rb:936 msgid "" "Quotes are not used correctly in this option.\n" "Really set it to %1?\n" @@ -787,8 +776,8 @@ "이 옵션에서 따옴표가 올바르게 사용되지 않습니다.\n" "%1(으)로 설정하시겠습니까?\n" -#. TRANSLATORS: Popup question. %1 is the value of the option. -#: src/include/dns-server/dialog-main.rb:948 +#. TRANSLATORS: Popup question. %1 is the value of the option. +#: src/include/dns-server/dialog-main.rb:948 msgid "" "Brackets are not used correctly in this option.\n" "Really set it to %1?\n" @@ -796,8 +785,8 @@ "이 옵션에서 대괄호가 올바르게 사용되지 않습니다.\n" "%1(으)로 설정하시겠습니까?\n" -#. Popup question, %1 is the name of the option -#: src/include/dns-server/dialog-main.rb:992 +#. Popup question, %1 is the name of the option +#: src/include/dns-server/dialog-main.rb:992 msgid "" "Option %1 should be set only once.\n" "Really add another one?\n" @@ -805,78 +794,78 @@ "%1 옵션은 한 번만 설정해야 합니다.\n" "다른 것도 추가하시겠습니까?\n" -#. Table header - logging options -#: src/include/dns-server/dialog-main.rb:1032 +#. Table header - logging options +#: src/include/dns-server/dialog-main.rb:1032 msgid "Log Type" msgstr "로그 형식" -#. Radiobutton - log type -#: src/include/dns-server/dialog-main.rb:1044 +#. Radiobutton - log type +#: src/include/dns-server/dialog-main.rb:1044 msgid "&System Log" msgstr "시스템 로그(&S)" -#. Radiobutton - log type -#: src/include/dns-server/dialog-main.rb:1053 +#. Radiobutton - log type +#: src/include/dns-server/dialog-main.rb:1053 msgid "&File" msgstr "파일(&F)" -#. IntField - max. log size -#: src/include/dns-server/dialog-main.rb:1086 +#. IntField - max. log size +#: src/include/dns-server/dialog-main.rb:1086 msgid "Maximum &Size (MB)" msgstr "최대 크기(MB)(&S)" -#. IntField - max. log age -#: src/include/dns-server/dialog-main.rb:1097 +#. IntField - max. log age +#: src/include/dns-server/dialog-main.rb:1097 msgid "Maximum &Versions" msgstr "최대 버전(&V)" -#. Frame label - additional-logging -#: src/include/dns-server/dialog-main.rb:1115 +#. Frame label - additional-logging +#: src/include/dns-server/dialog-main.rb:1115 msgid "Additional Logging" msgstr "추가 로깅" -#. Checkbox - additional-logging -#: src/include/dns-server/dialog-main.rb:1120 +#. Checkbox - additional-logging +#: src/include/dns-server/dialog-main.rb:1120 msgid "Log All DNS &Queries" msgstr "모든 DNS 쿼리 기록(&Q)" -#. Checkbox - additional-logging -#: src/include/dns-server/dialog-main.rb:1123 +#. Checkbox - additional-logging +#: src/include/dns-server/dialog-main.rb:1123 msgid "Log Zone &Updates" msgstr "영역 업데이트 기록(&U)" -#. Checkbox - additional-logging -#: src/include/dns-server/dialog-main.rb:1126 +#. Checkbox - additional-logging +#: src/include/dns-server/dialog-main.rb:1126 msgid "Log Zone &Transfers" msgstr "영역 전송 기록(&T)" -#. popup headline -#: src/include/dns-server/dialog-main.rb:1283 +#. popup headline +#: src/include/dns-server/dialog-main.rb:1283 msgid "Select File for Log" msgstr "기록할 파일 선택" -#. Frame label - adding ACL-optiopn -#: src/include/dns-server/dialog-main.rb:1300 +#. Frame label - adding ACL-optiopn +#: src/include/dns-server/dialog-main.rb:1300 msgid "Option Setup" msgstr "옵션 설정" -#. Textentry - adding ACL-optiopn - name -#: src/include/dns-server/dialog-main.rb:1313 +#. Textentry - adding ACL-optiopn - name +#: src/include/dns-server/dialog-main.rb:1313 msgid "&Name" msgstr "이름(&N)" -#. Table header - ACL-options listing -#: src/include/dns-server/dialog-main.rb:1349 +#. Table header - ACL-options listing +#: src/include/dns-server/dialog-main.rb:1349 msgid "Current ACL List" msgstr "현재 ACL 목록" -#. Table header item - ACL-options -#: src/include/dns-server/dialog-main.rb:1357 +#. Table header item - ACL-options +#: src/include/dns-server/dialog-main.rb:1357 msgid "ACL" msgstr "ACL" -#. A popup question, %1 is number of zones -#: src/include/dns-server/dialog-main.rb:1477 +#. A popup question, %1 is number of zones +#: src/include/dns-server/dialog-main.rb:1477 msgid "" "This ACL is used by %1 zones.\n" "Really remove it?\n" @@ -884,71 +873,71 @@ "%1 영역에서 이 ACL이 사용되고 있습니다.\n" "이를 제거하시겠습니까?\n" -#. An error popup message -#: src/include/dns-server/dialog-main.rb:1564 +#. An error popup message +#: src/include/dns-server/dialog-main.rb:1564 msgid "The specified ACL entry already exists." msgstr "지정한 ACL 항목은 이미 존재합니다." -#. frame label -#: src/include/dns-server/dialog-main.rb:1581 +#. frame label +#: src/include/dns-server/dialog-main.rb:1581 msgid "Add New Zone " msgstr "새 영역 추가" -#. #-#-#-#-# dns-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. Combobox - DNS adding zone - Type Master -#. TRANSLATORS: Table item - Server type -#. #-#-#-#-# dns-server.xgettext.pot #-#-#-#-# -#. type of zone to be used in summary -#: src/include/dns-server/dialog-main.rb:1602 -#: src/include/dns-server/dialog-main.rb:1692 src/modules/DnsServer.pm:1667 +#. #-#-#-#-# dns-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. Combobox - DNS adding zone - Type Master +#. TRANSLATORS: Table item - Server type +#. #-#-#-#-# dns-server.xgettext.pot #-#-#-#-# +#. type of zone to be used in summary +#: src/include/dns-server/dialog-main.rb:1602 +#: src/include/dns-server/dialog-main.rb:1692 src/modules/DnsServer.pm:1667 msgid "Master" msgstr "주" -#. #-#-#-#-# dns-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. Combobox - DNS adding zone - Type Slave -#. TRANSLATORS: Table item - Server type -#. TRANSLATORS: Table item - Server type -#. #-#-#-#-# dns-server.xgettext.pot #-#-#-#-# -#. type of zone to be used in summary -#: src/include/dns-server/dialog-main.rb:1604 -#: src/include/dns-server/dialog-main.rb:1695 -#: src/include/dns-server/dialog-main.rb:1698 src/modules/DnsServer.pm:1669 +#. #-#-#-#-# dns-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. Combobox - DNS adding zone - Type Slave +#. TRANSLATORS: Table item - Server type +#. TRANSLATORS: Table item - Server type +#. #-#-#-#-# dns-server.xgettext.pot #-#-#-#-# +#. type of zone to be used in summary +#: src/include/dns-server/dialog-main.rb:1604 +#: src/include/dns-server/dialog-main.rb:1695 +#: src/include/dns-server/dialog-main.rb:1698 src/modules/DnsServer.pm:1669 msgid "Slave" msgstr "보조" -#. #-#-#-#-# dns-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. Combobox - DNS adding zone - Type Slave -#. TRANSLATORS: Table item - Server type -#. #-#-#-#-# dns-server.xgettext.pot #-#-#-#-# -#. type of zone to be used in summary -#: src/include/dns-server/dialog-main.rb:1606 -#: src/include/dns-server/dialog-main.rb:1701 src/modules/DnsServer.pm:1675 +#. #-#-#-#-# dns-server.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. Combobox - DNS adding zone - Type Slave +#. TRANSLATORS: Table item - Server type +#. #-#-#-#-# dns-server.xgettext.pot #-#-#-#-# +#. type of zone to be used in summary +#: src/include/dns-server/dialog-main.rb:1606 +#: src/include/dns-server/dialog-main.rb:1701 src/modules/DnsServer.pm:1675 msgid "Forward" msgstr "전달" -#. Table header - DNS listing zones -#: src/include/dns-server/dialog-main.rb:1629 +#. Table header - DNS listing zones +#: src/include/dns-server/dialog-main.rb:1629 msgid "Configured DNS Zones" msgstr "구성된 DNS 영역" -#. error report -#: src/include/dns-server/dialog-main.rb:1838 +#. error report +#: src/include/dns-server/dialog-main.rb:1838 msgid "A zone with the specified name is already configured." msgstr "지정한 이름의 영역은 이미 구성되었습니다." -#. Write settings dialog -#. @return `abort if aborted and `next otherwise -#: src/include/dns-server/dialog-main.rb:1887 +#. Write settings dialog +#. @return `abort if aborted and `next otherwise +#: src/include/dns-server/dialog-main.rb:1887 msgid "Saving the configuration failed. Change the settings?" msgstr "구성을 저장하지 못했습니다. 설정을 변경하시겠습니까?" -#. Writes settings and restores the dialog without exiting -#: src/include/dns-server/dialog-main.rb:1903 +#. Writes settings and restores the dialog without exiting +#: src/include/dns-server/dialog-main.rb:1903 msgid "Saving the configuration failed" msgstr "구성 저장 실패" -#. Yes-No popup -#: src/include/dns-server/dialog-main.rb:1916 +#. Yes-No popup +#: src/include/dns-server/dialog-main.rb:1916 msgid "" "All changes will be lost.\n" "Really leave the DNS server configuration without saving?" @@ -956,83 +945,83 @@ "모든 변경 사항을 잃게 됩니다.\n" "저장하지 않고 DNS 서버를 종료하시겠습니까?" -#. FIXME: new startup -#: src/include/dns-server/dialog-main.rb:1969 +#. FIXME: new startup +#: src/include/dns-server/dialog-main.rb:1969 msgid "Apply Changes" msgstr "변경 사항 적용" -#. Dialog Label - DNS - expert settings -#. Tree Menu Item - DNS - expert settings -#: src/include/dns-server/dialog-main.rb:1975 -#: src/include/dns-server/dialog-main.rb:1978 +#. Dialog Label - DNS - expert settings +#. Tree Menu Item - DNS - expert settings +#: src/include/dns-server/dialog-main.rb:1975 +#: src/include/dns-server/dialog-main.rb:1978 msgid "Start-Up" msgstr "시작" -#. Dialog Label - DNS - expert settings -#. Tree Menu Item - DNS - expert settings -#: src/include/dns-server/dialog-main.rb:2006 -#: src/include/dns-server/dialog-main.rb:2009 +#. Dialog Label - DNS - expert settings +#. Tree Menu Item - DNS - expert settings +#: src/include/dns-server/dialog-main.rb:2006 +#: src/include/dns-server/dialog-main.rb:2009 msgid "Basic Options" msgstr "기본 옵션" -#. Dialog Label - DNS - expert settings -#: src/include/dns-server/dialog-main.rb:2019 -#: src/include/dns-server/dialog-main.rb:2021 +#. Dialog Label - DNS - expert settings +#: src/include/dns-server/dialog-main.rb:2019 +#: src/include/dns-server/dialog-main.rb:2021 msgid "Logging" msgstr "로그인" -#. Dialog Label - DNS - expert settings -#. Tree Menu Item - DNS - expert settings -#. multi selection box -#. multi selection box -#: src/include/dns-server/dialog-main.rb:2032 -#: src/include/dns-server/dialog-main.rb:2035 -#: src/include/dns-server/dialog-masterzone.rb:156 -#: src/include/dns-server/dialog-masterzone.rb:2694 +#. Dialog Label - DNS - expert settings +#. Tree Menu Item - DNS - expert settings +#. multi selection box +#. multi selection box +#: src/include/dns-server/dialog-main.rb:2032 +#: src/include/dns-server/dialog-main.rb:2035 +#: src/include/dns-server/dialog-masterzone.rb:156 +#: src/include/dns-server/dialog-masterzone.rb:2694 msgid "ACLs" msgstr "ACL" -#. Dialog Label - DNS - expert settings -#. Tree Menu Item - DNS - expert settings -#: src/include/dns-server/dialog-main.rb:2049 -#: src/include/dns-server/dialog-main.rb:2052 +#. Dialog Label - DNS - expert settings +#. Tree Menu Item - DNS - expert settings +#: src/include/dns-server/dialog-main.rb:2049 +#: src/include/dns-server/dialog-main.rb:2052 msgid "TSIG Keys" msgstr "TSIG 키" -#. check box -#: src/include/dns-server/dialog-masterzone.rb:93 +#. check box +#: src/include/dns-server/dialog-masterzone.rb:93 msgid "A&llow Dynamic Updates" msgstr "동적 업데이트 허용(&L)" -#. combo box -#: src/include/dns-server/dialog-masterzone.rb:103 +#. combo box +#: src/include/dns-server/dialog-masterzone.rb:103 msgid "TSIG &Key" msgstr "TSIG 키(&K)" -#. check box -#. check box -#: src/include/dns-server/dialog-masterzone.rb:151 -#: src/include/dns-server/dialog-masterzone.rb:2690 +#. check box +#. check box +#: src/include/dns-server/dialog-masterzone.rb:151 +#: src/include/dns-server/dialog-masterzone.rb:2690 msgid "Enable &Zone Transport" msgstr "영역 전송 사용(&Z)" -#. check box -#: src/include/dns-server/dialog-masterzone.rb:171 +#. check box +#: src/include/dns-server/dialog-masterzone.rb:171 msgid "A&utomatically Generate Records From" msgstr "자동으로 레코드 생성(&U)" -#. multi selection box -#: src/include/dns-server/dialog-masterzone.rb:180 +#. multi selection box +#: src/include/dns-server/dialog-masterzone.rb:180 msgid "Zon&e" msgstr "영역(&E)" -#. frame label -#: src/include/dns-server/dialog-masterzone.rb:192 +#. frame label +#: src/include/dns-server/dialog-masterzone.rb:192 msgid "Connected Reverse Zones" msgstr "역방향 영역 연결됨" -#. popup message -#: src/include/dns-server/dialog-masterzone.rb:455 +#. popup message +#: src/include/dns-server/dialog-masterzone.rb:455 msgid "" "This function is not available during\n" "preparation for autoinstallation.\n" @@ -1040,152 +1029,152 @@ "자동 설치를 준비하는 동안에는 이 기능을\n" "사용할 수 없습니다.\n" -#. error report -#: src/include/dns-server/dialog-masterzone.rb:466 +#. error report +#: src/include/dns-server/dialog-masterzone.rb:466 msgid "No TSIG key is defined." msgstr "TSIG 키가 정의되지 않았습니다." -#. Textentry - adding nameserver -#: src/include/dns-server/dialog-masterzone.rb:496 +#. Textentry - adding nameserver +#: src/include/dns-server/dialog-masterzone.rb:496 msgid "&Name Server to Add" msgstr "추가할 이름 서버(&N)" -#. Selectionbox - listing current nameservers -#. selection box label -#: src/include/dns-server/dialog-masterzone.rb:519 -#: src/include/dns-server/dialog-masterzone.rb:545 +#. Selectionbox - listing current nameservers +#. selection box label +#: src/include/dns-server/dialog-masterzone.rb:519 +#: src/include/dns-server/dialog-masterzone.rb:545 msgid "Na&me Server List" msgstr "이름 서버 목록(&M)" -#. error message -#: src/include/dns-server/dialog-masterzone.rb:643 +#. error message +#: src/include/dns-server/dialog-masterzone.rb:643 msgid "The specified name server already exists." msgstr "지정한 이름 서버는 이미 존재합니다." -#. Frame label - adding mail server -#: src/include/dns-server/dialog-masterzone.rb:689 +#. Frame label - adding mail server +#: src/include/dns-server/dialog-masterzone.rb:689 msgid "Mail Server to Add" msgstr "추가할 메일 서버" -#. Textentry - addind mail server - Name -#: src/include/dns-server/dialog-masterzone.rb:699 +#. Textentry - addind mail server - Name +#: src/include/dns-server/dialog-masterzone.rb:699 msgid "&Address" msgstr "주소(&A)" -#. IntField - adding mail server - Priority -#. IntField - zone settings - Record Value -#. IntField - zone settings - Record Value -#. int field -#: src/include/dns-server/dialog-masterzone.rb:702 -#: src/include/dns-server/dialog-masterzone.rb:1227 -#: src/include/dns-server/dialog-masterzone.rb:1285 -#: src/include/dns-server/options.rb:435 +#. IntField - adding mail server - Priority +#. IntField - zone settings - Record Value +#. IntField - zone settings - Record Value +#. int field +#: src/include/dns-server/dialog-masterzone.rb:702 +#: src/include/dns-server/dialog-masterzone.rb:1227 +#: src/include/dns-server/dialog-masterzone.rb:1285 +#: src/include/dns-server/options.rb:435 msgid "&Priority" msgstr "우선 순위(&P)" -#. Table label - listing mail servers -#: src/include/dns-server/dialog-masterzone.rb:724 +#. Table label - listing mail servers +#: src/include/dns-server/dialog-masterzone.rb:724 msgid "Mail Relay List" msgstr "메일 릴레이 목록" -#. A popup error message -#: src/include/dns-server/dialog-masterzone.rb:861 +#. A popup error message +#: src/include/dns-server/dialog-masterzone.rb:861 msgid "The specified value is not a valid hostname or IP address." msgstr "지정한 값은 유효한 호스트 이름 또는 IP 주소가 아닙니다." -#. error message -#: src/include/dns-server/dialog-masterzone.rb:883 +#. error message +#: src/include/dns-server/dialog-masterzone.rb:883 msgid "The specified mail server already exists." msgstr "지정한 메일 서버는 이미 존재합니다." -#. DNS Settings time units (combobox item) -#: src/include/dns-server/dialog-masterzone.rb:930 +#. DNS Settings time units (combobox item) +#: src/include/dns-server/dialog-masterzone.rb:930 msgid "Seconds" msgstr "초" -#. DNS Settings time units (combobox item) -#: src/include/dns-server/dialog-masterzone.rb:932 +#. DNS Settings time units (combobox item) +#: src/include/dns-server/dialog-masterzone.rb:932 msgid "Minutes" msgstr "분" -#. DNS Settings time units (combobox item) -#: src/include/dns-server/dialog-masterzone.rb:934 +#. DNS Settings time units (combobox item) +#: src/include/dns-server/dialog-masterzone.rb:934 msgid "Hours" msgstr "시간" -#. DNS Settings time units (combobox item) -#: src/include/dns-server/dialog-masterzone.rb:936 +#. DNS Settings time units (combobox item) +#: src/include/dns-server/dialog-masterzone.rb:936 msgid "Days" msgstr "일" -#. DNS Settings time units (combobox item) -#: src/include/dns-server/dialog-masterzone.rb:938 +#. DNS Settings time units (combobox item) +#: src/include/dns-server/dialog-masterzone.rb:938 msgid "Weeks" msgstr "주" -#. Textentry - setting Serial for zone -#: src/include/dns-server/dialog-masterzone.rb:950 +#. Textentry - setting Serial for zone +#: src/include/dns-server/dialog-masterzone.rb:950 msgid "Seri&al" msgstr "일련 번호(&A)" -#. Textentry - setting TTL for zone -#: src/include/dns-server/dialog-masterzone.rb:959 +#. Textentry - setting TTL for zone +#: src/include/dns-server/dialog-masterzone.rb:959 msgid "TT&L" msgstr "TTL(&L)" -#. Combobox - Setting DNS Retry - Unit -#: src/include/dns-server/dialog-masterzone.rb:964 -#: src/include/dns-server/dialog-masterzone.rb:1001 +#. Combobox - Setting DNS Retry - Unit +#: src/include/dns-server/dialog-masterzone.rb:964 +#: src/include/dns-server/dialog-masterzone.rb:1001 msgid "&Unit" msgstr "단위(&U)" -#. IntField - Setting DNS Refresh - Value -#: src/include/dns-server/dialog-masterzone.rb:978 +#. IntField - Setting DNS Refresh - Value +#: src/include/dns-server/dialog-masterzone.rb:978 msgid "Re&fresh" msgstr "새로 고침" -#. Combobox - Setting DNS Refresh - Unit -#: src/include/dns-server/dialog-masterzone.rb:986 +#. Combobox - Setting DNS Refresh - Unit +#: src/include/dns-server/dialog-masterzone.rb:986 msgid "Un&it" msgstr "단위(&U)" -#. IntField - Setting DNS Retry - Value -#: src/include/dns-server/dialog-masterzone.rb:995 +#. IntField - Setting DNS Retry - Value +#: src/include/dns-server/dialog-masterzone.rb:995 msgid "Retr&y" msgstr "재시도(&Y)" -#. IntField - Setting DNS Expiry - Value -#: src/include/dns-server/dialog-masterzone.rb:1008 +#. IntField - Setting DNS Expiry - Value +#: src/include/dns-server/dialog-masterzone.rb:1008 msgid "Ex&piration" msgstr "만료(&P)" -#. Combobox - Setting DNS Expiry - Unit -#: src/include/dns-server/dialog-masterzone.rb:1016 +#. Combobox - Setting DNS Expiry - Unit +#: src/include/dns-server/dialog-masterzone.rb:1016 msgid "U&nit" msgstr "단위(&U)" -#. IntField - Setting DNS Minimum - Value -#: src/include/dns-server/dialog-masterzone.rb:1025 +#. IntField - Setting DNS Minimum - Value +#: src/include/dns-server/dialog-masterzone.rb:1025 msgid "&Minimum" msgstr "최소(&M)" -#. Combobox - Setting DNS Minimum - Unit -#: src/include/dns-server/dialog-masterzone.rb:1033 +#. Combobox - Setting DNS Minimum - Unit +#: src/include/dns-server/dialog-masterzone.rb:1033 msgid "Uni&t" msgstr "단위(&U)" -#. Handle events in a tab of a dialog -#: src/include/dns-server/dialog-masterzone.rb:1156 +#. Handle events in a tab of a dialog +#: src/include/dns-server/dialog-masterzone.rb:1156 msgid "The serial number of the zone must be specified." msgstr "영역의 일련 번호를 반드시 지정해야 합니다." -#. error report, %1 is an integer -#: src/include/dns-server/dialog-masterzone.rb:1164 +#. error report, %1 is an integer +#: src/include/dns-server/dialog-masterzone.rb:1164 msgid "The serial number must be no more than %1 digits long." msgstr "일련 번호는 %1자릿수를 넘지 않아야 합니다." -#. TRANSLATORS: A popup with question, current setting could produce errors -#: src/include/dns-server/dialog-masterzone.rb:1185 +#. TRANSLATORS: A popup with question, current setting could produce errors +#: src/include/dns-server/dialog-masterzone.rb:1185 msgid "" "The expiration time-out is higher than the time period\n" "of zone refreshes. The zone will not be reachable\n" @@ -1197,107 +1186,107 @@ "연결할 수 없습니다.\n" "계속하시겠습니까?" -#. Textentry - zone settings - Record Name -#. Textentry - zone settings - Record Name -#. Textentry - zone settings - Record Name -#: src/include/dns-server/dialog-masterzone.rb:1209 -#: src/include/dns-server/dialog-masterzone.rb:1244 -#: src/include/dns-server/dialog-masterzone.rb:1301 +#. Textentry - zone settings - Record Name +#. Textentry - zone settings - Record Name +#. Textentry - zone settings - Record Name +#: src/include/dns-server/dialog-masterzone.rb:1209 +#: src/include/dns-server/dialog-masterzone.rb:1244 +#: src/include/dns-server/dialog-masterzone.rb:1301 msgid "&Record Key" msgstr "레코드 키(&R)" -#. Combobox - zone settings - Record Type -#. Combobox - zone settings - Record Type -#. Combobox - zone settings - Record Type -#: src/include/dns-server/dialog-masterzone.rb:1217 -#: src/include/dns-server/dialog-masterzone.rb:1276 -#: src/include/dns-server/dialog-masterzone.rb:1309 +#. Combobox - zone settings - Record Type +#. Combobox - zone settings - Record Type +#. Combobox - zone settings - Record Type +#: src/include/dns-server/dialog-masterzone.rb:1217 +#: src/include/dns-server/dialog-masterzone.rb:1276 +#: src/include/dns-server/dialog-masterzone.rb:1309 msgid "T&ype" msgstr "유형(&T)" -#. Textentry - zone settings - Record Value -#. IntField - zone settings - Record Value -#. Textentry - zone settings - Record Value -#: src/include/dns-server/dialog-masterzone.rb:1235 -#: src/include/dns-server/dialog-masterzone.rb:1282 -#: src/include/dns-server/dialog-masterzone.rb:1314 +#. Textentry - zone settings - Record Value +#. IntField - zone settings - Record Value +#. Textentry - zone settings - Record Value +#: src/include/dns-server/dialog-masterzone.rb:1235 +#: src/include/dns-server/dialog-masterzone.rb:1282 +#: src/include/dns-server/dialog-masterzone.rb:1314 msgid "Val&ue" msgstr "값(&A)" -#. Textentry - zone settings - Record Name -#: src/include/dns-server/dialog-masterzone.rb:1251 +#. Textentry - zone settings - Record Name +#: src/include/dns-server/dialog-masterzone.rb:1251 msgid "&Service" msgstr "서비스(&S)" -#. Textentry - zone settings - Record Name -#: src/include/dns-server/dialog-masterzone.rb:1265 +#. Textentry - zone settings - Record Name +#: src/include/dns-server/dialog-masterzone.rb:1265 msgid "&Protocol" msgstr "프로토콜(&P)" -#. IntField - zone settings - Record Value -#: src/include/dns-server/dialog-masterzone.rb:1287 +#. IntField - zone settings - Record Value +#: src/include/dns-server/dialog-masterzone.rb:1287 msgid "&Weight" msgstr "가중치(&W)" -#. IntField - zone settings - Record Value -#: src/include/dns-server/dialog-masterzone.rb:1289 +#. IntField - zone settings - Record Value +#: src/include/dns-server/dialog-masterzone.rb:1289 msgid "&Port" msgstr "포트(&P)" -#. reverse zone -#: src/include/dns-server/dialog-masterzone.rb:1334 +#. reverse zone +#: src/include/dns-server/dialog-masterzone.rb:1334 msgid "A: IPv4 Domain Name Translation" msgstr "A: IPv4 도메인 이름 변환" -#: src/include/dns-server/dialog-masterzone.rb:1335 +#: src/include/dns-server/dialog-masterzone.rb:1335 msgid "AAAA: IPv6 Domain Name Translation" msgstr "AAAA: IPv6 도메인 이름 변환" -#: src/include/dns-server/dialog-masterzone.rb:1336 +#: src/include/dns-server/dialog-masterzone.rb:1336 msgid "CNAME: Alias for Domain Name" msgstr "CNAME: 도메인 이름의 별칭" -#: src/include/dns-server/dialog-masterzone.rb:1337 +#: src/include/dns-server/dialog-masterzone.rb:1337 msgid "NS: Name Server" msgstr "NS: 이름 서버" -#: src/include/dns-server/dialog-masterzone.rb:1338 +#: src/include/dns-server/dialog-masterzone.rb:1338 msgid "MX: Mail Relay" msgstr "MX: 메일 릴레이" -#: src/include/dns-server/dialog-masterzone.rb:1339 +#: src/include/dns-server/dialog-masterzone.rb:1339 msgid "PTR: Reverse Translation" msgstr "PTR: 역방향 변환" -#: src/include/dns-server/dialog-masterzone.rb:1340 +#: src/include/dns-server/dialog-masterzone.rb:1340 msgid "SRV: Services Record" msgstr "SRV: 서비스 레코드" -#: src/include/dns-server/dialog-masterzone.rb:1341 +#: src/include/dns-server/dialog-masterzone.rb:1341 msgid "TXT: Text Record" msgstr "TXT: 텍스트 레코드" -#: src/include/dns-server/dialog-masterzone.rb:1342 +#: src/include/dns-server/dialog-masterzone.rb:1342 msgid "SPF: Sender Policy Framework" msgstr "SPF: Sender Policy Framework" -#. Frame label - Adding/Changing IP/CNAME/Type... zone settings -#: src/include/dns-server/dialog-masterzone.rb:1359 +#. Frame label - Adding/Changing IP/CNAME/Type... zone settings +#: src/include/dns-server/dialog-masterzone.rb:1359 msgid "Record Settings" msgstr "레코드 설정" -#. Table label - Records listing -#: src/include/dns-server/dialog-masterzone.rb:1395 +#. Table label - Records listing +#: src/include/dns-server/dialog-masterzone.rb:1395 msgid "Configured Resource Records" msgstr "구성된 리소스 레코드" -#. Table menu item - Records listing -#: src/include/dns-server/dialog-masterzone.rb:1405 +#. Table menu item - Records listing +#: src/include/dns-server/dialog-masterzone.rb:1405 msgid "Record Key" msgstr "레코드 키" -#. Pop-up error message, %1 is replaced with an example -#: src/include/dns-server/dialog-masterzone.rb:1835 +#. Pop-up error message, %1 is replaced with an example +#: src/include/dns-server/dialog-masterzone.rb:1835 msgid "" "Invalid IPv6 reverse IP.\n" "\n" @@ -1309,28 +1298,26 @@ "IPv6 역방향 레코드는 전체 형식(%1)으로 지원되거나\n" "현재 영역에 대한 상대 형식으로 지원됩니다." -#. (hostname or FQ) -#: src/include/dns-server/dialog-masterzone.rb:1873 +#. (hostname or FQ) +#: src/include/dns-server/dialog-masterzone.rb:1873 msgid "Invalid IPv6 address." msgstr "IPv6 주소가 잘못되었습니다." -#. TRANSLATORS: Error message -#. %{type} replaced with record type (TXT or SPF) -#: src/include/dns-server/dialog-masterzone.rb:1906 +#. TRANSLATORS: Error message +#. %{type} replaced with record type (TXT or SPF) +#: src/include/dns-server/dialog-masterzone.rb:1906 msgid "" -"Invalid %{type} record key. It should consist of printable US-ASCII " -"characters excluding '='\n" +"Invalid %{type} record key. It should consist of printable US-ASCII characters excluding '='\n" "and must be at least one character long." msgstr "" -"잘못된 %{type} 레코드 키입니다. '='를 제외한 인쇄 가능한 US-ASCII 문자로 구성" -"되어야 하며\n" +"잘못된 %{type} 레코드 키입니다. '='를 제외한 인쇄 가능한 US-ASCII 문자로 구성되어야 하며\n" "한 자 이상이어야 합니다." -#. TRANSLATORS: Error message -#. %{type} - replaced with record type (TXT or SPF) -#. %{max} - replaced with the maximal length -#. %{current} - replaced with the current length of a new TXT record. -#: src/include/dns-server/dialog-masterzone.rb:1924 +#. TRANSLATORS: Error message +#. %{type} - replaced with record type (TXT or SPF) +#. %{max} - replaced with the maximal length +#. %{current} - replaced with the current length of a new TXT record. +#: src/include/dns-server/dialog-masterzone.rb:1924 msgid "" "Maximal length of a %{type} record is %{max} characters.\n" "This message is %{current} characters long." @@ -1338,95 +1325,94 @@ "%{type} 레코드의 최대 길이는 %{max}자입니다.\n" "이 메시지는 %{current}자입니다." -#. TRANSLATORS: a popup message, CNAME (link) points to itself -#: src/include/dns-server/dialog-masterzone.rb:1955 +#. TRANSLATORS: a popup message, CNAME (link) points to itself +#: src/include/dns-server/dialog-masterzone.rb:1955 msgid "CNAME cannot point to itself." msgstr "CNAME은 자신을 가리킬 수 없습니다." -#. When no dialog defined for this tab (software error) -#: src/include/dns-server/dialog-masterzone.rb:2331 +#. When no dialog defined for this tab (software error) +#: src/include/dns-server/dialog-masterzone.rb:2331 msgid "An internal error has occurred." msgstr "내부 오류가 발생했습니다." -#. Dialog Caption - Expert Settings - Zone Editor -#. dialog caption -#: src/include/dns-server/dialog-masterzone.rb:2403 -#: src/include/dns-server/dialog-masterzone.rb:2699 +#. Dialog Caption - Expert Settings - Zone Editor +#. dialog caption +#: src/include/dns-server/dialog-masterzone.rb:2403 +#: src/include/dns-server/dialog-masterzone.rb:2699 msgid "Zone Editor" msgstr "영역 편집기" -#. Menu Item - Zone Editor - Tab -#. Menu Item - Zone Editor - Tab -#: src/include/dns-server/dialog-masterzone.rb:2424 -#: src/include/dns-server/dialog-masterzone.rb:2436 +#. Menu Item - Zone Editor - Tab +#. Menu Item - Zone Editor - Tab +#: src/include/dns-server/dialog-masterzone.rb:2424 +#: src/include/dns-server/dialog-masterzone.rb:2436 msgid "&Basics" msgstr "기본(&B)" -#. Menu Item - Zone Editor - Tab -#. Menu Item - Zone Editor - Tab -#: src/include/dns-server/dialog-masterzone.rb:2426 -#: src/include/dns-server/dialog-masterzone.rb:2438 +#. Menu Item - Zone Editor - Tab +#. Menu Item - Zone Editor - Tab +#: src/include/dns-server/dialog-masterzone.rb:2426 +#: src/include/dns-server/dialog-masterzone.rb:2438 msgid "NS Recor&ds" msgstr "NS 레코드(&D)" -#. Menu Item - Zone Editor - Tab -#. Menu Item - Zone Editor - Tab -#: src/include/dns-server/dialog-masterzone.rb:2428 -#: src/include/dns-server/dialog-masterzone.rb:2442 +#. Menu Item - Zone Editor - Tab +#. Menu Item - Zone Editor - Tab +#: src/include/dns-server/dialog-masterzone.rb:2428 +#: src/include/dns-server/dialog-masterzone.rb:2442 msgid "&SOA" msgstr "SOA(&S)" -#. Menu Item - Zone Editor - Tab -#. Menu Item - Zone Editor - Tab -#: src/include/dns-server/dialog-masterzone.rb:2430 -#: src/include/dns-server/dialog-masterzone.rb:2444 +#. Menu Item - Zone Editor - Tab +#. Menu Item - Zone Editor - Tab +#: src/include/dns-server/dialog-masterzone.rb:2430 +#: src/include/dns-server/dialog-masterzone.rb:2444 msgid "R&ecords" msgstr "레코드(&E)" -#. Menu Item - Zone Editor - Tab -#: src/include/dns-server/dialog-masterzone.rb:2440 +#. Menu Item - Zone Editor - Tab +#: src/include/dns-server/dialog-masterzone.rb:2440 msgid "M&X Records" msgstr "MX 레코드(&X)" -#. Label - connected with Textentry which shows current edited zone -#. Label - connected with Textentry which shows current edited zone -#. Label - connected with Textentry which shows current edited zone -#: src/include/dns-server/dialog-masterzone.rb:2455 -#: src/include/dns-server/dialog-masterzone.rb:2668 -#: src/include/dns-server/dialog-masterzone.rb:2871 +#. Label - connected with Textentry which shows current edited zone +#. Label - connected with Textentry which shows current edited zone +#. Label - connected with Textentry which shows current edited zone +#: src/include/dns-server/dialog-masterzone.rb:2455 +#: src/include/dns-server/dialog-masterzone.rb:2668 +#: src/include/dns-server/dialog-masterzone.rb:2871 msgid "Settings for Zone" msgstr "영역에 대한 설정" -#. at least one NS server must be set -#: src/include/dns-server/dialog-masterzone.rb:2532 +#. at least one NS server must be set +#: src/include/dns-server/dialog-masterzone.rb:2532 msgid "At least one NS server must be set." msgstr "하나 이상의 NS 서버를 설정해야 합니다." -#. warning message, %1 is replaced with a zone name -#. -#. Automatically Generate Records From is a feature that makes YaST to generate -#. DNS records manually from selected zone -#: src/include/dns-server/dialog-masterzone.rb:2594 +#. warning message, %1 is replaced with a zone name +#. +#. Automatically Generate Records From is a feature that makes YaST to generate +#. DNS records manually from selected zone +#: src/include/dns-server/dialog-masterzone.rb:2594 msgid "" "Current zone records are automatically generated from %1 zone.\n" -"To change records manually disable the Automatically Generate Records From " -"feature." +"To change records manually disable the Automatically Generate Records From feature." msgstr "" "현재 영역 레코드가 %1 영역에서 자동으로 생성됩니다.\n" "레코드를 변경하려면 자동으로 레코드 생성 기능을 수동으로 비활성화하십시오." -#. TRANSLATORS: Text entry -#: src/include/dns-server/dialog-masterzone.rb:2682 +#. TRANSLATORS: Text entry +#: src/include/dns-server/dialog-masterzone.rb:2682 msgid "&Master DNS Server IP" msgstr "마스터 DNS 서버 IP(&M)" -#. TRANSLATORS: Popup error headline -#: src/include/dns-server/dialog-masterzone.rb:2746 +#. TRANSLATORS: Popup error headline +#: src/include/dns-server/dialog-masterzone.rb:2746 msgid "Missing Master Server" msgstr "마스터 서버 누락" -#. TRANSLATORS: Popup error text -#: src/include/dns-server/dialog-masterzone.rb:2748 +#. TRANSLATORS: Popup error text +#: src/include/dns-server/dialog-masterzone.rb:2748 msgid "" "Every slave zone must have its master server IP defined.\n" "Configuration of a DNS server without a master server would fail.\n" @@ -1436,33 +1422,33 @@ "마스터 서버가 없으면 DNS 서버를 구성할 수 없습니다.\n" " 계속 진행하면 현재 영역이 제거됩니다." -#. TRANSLATORS: A popup error message -#: src/include/dns-server/dialog-masterzone.rb:2768 +#. TRANSLATORS: A popup error message +#: src/include/dns-server/dialog-masterzone.rb:2768 msgid "No master DNS server defined." msgstr "정의된 마스터 DNS 서버가 없습니다." -#. A popup error message -#: src/include/dns-server/dialog-masterzone.rb:2780 +#. A popup error message +#: src/include/dns-server/dialog-masterzone.rb:2780 msgid "The specified master name server is not a valid IP address." msgstr "지정한 마스터 이름 서버의 IP 주소가 유효하지 않습니다." -#. Textentry - adding forwarder -#: src/include/dns-server/dialog-masterzone.rb:2891 +#. Textentry - adding forwarder +#: src/include/dns-server/dialog-masterzone.rb:2891 msgid "New &Forwarder IP Address" msgstr "새 전달자 IP 주소(&F)" -#. Selectionbox - listing current forwarders -#: src/include/dns-server/dialog-masterzone.rb:2916 +#. Selectionbox - listing current forwarders +#: src/include/dns-server/dialog-masterzone.rb:2916 msgid "Current &Zone Forwarders" msgstr "현재 영역 전달자(&Z)" -#. dialog caption -#: src/include/dns-server/dialog-masterzone.rb:2938 +#. dialog caption +#: src/include/dns-server/dialog-masterzone.rb:2938 msgid "Forward Zone Editor" msgstr "영역 편집기 전달" -#. TRANSLATORS: popup question -#: src/include/dns-server/dialog-masterzone.rb:2974 +#. TRANSLATORS: popup question +#: src/include/dns-server/dialog-masterzone.rb:2974 msgid "" "This forward zone has no forwarders defined, which means\n" "that all DNS queries for this zone are denied.\n" @@ -1472,8 +1458,8 @@ "영역에 대한 모든 DNS 조회가 거부됩니다.\n" " 정말로 이 조회를 거부하시겠습니까?" -#. yes-no popup -#: src/include/dns-server/dialogs.rb:34 +#. yes-no popup +#: src/include/dns-server/dialogs.rb:34 msgid "" "All changes will be lost.\n" "Really exit?" @@ -1481,13 +1467,13 @@ "모든 변경 사항을 잃게 됩니다.\n" "종료하시겠습니까?" -#. message popup -#: src/include/dns-server/dialogs.rb:81 +#. message popup +#: src/include/dns-server/dialogs.rb:81 msgid "A zone of this type cannot be edited with this tool." msgstr "이 형식의 영역은 이 도구로 편집할 수 없습니다." -#. Read dialog help 1/2 -#: src/include/dns-server/helps.rb:20 +#. Read dialog help 1/2 +#: src/include/dns-server/helps.rb:20 msgid "" "<p><b><big>Initializing DNS Server Configuration</big></b><br>\n" "Please wait...<br></p>" @@ -1495,8 +1481,8 @@ "<p><b><big>DNS 서버 구성 초기화</big></b><br>\n" "잠시 기다려 주십시오.<br></p>" -#. Read dialog help 2/2 -#: src/include/dns-server/helps.rb:24 +#. Read dialog help 2/2 +#: src/include/dns-server/helps.rb:24 msgid "" "<p><b><big>Aborting Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>" @@ -1504,8 +1490,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>" -#. Write dialog help 1/2 -#: src/include/dns-server/helps.rb:28 +#. Write dialog help 1/2 +#: src/include/dns-server/helps.rb:28 msgid "" "<p><b><big>Saving DNS Server Configuration</big></b><br>\n" "Please wait...<br></p>" @@ -1513,8 +1499,8 @@ "<p><b><big>DNS 서버 구성 저장</big></b><br>\n" "잠시 기다려 주십시오.<br></p>" -#. Write dialog help 2/2 -#: src/include/dns-server/helps.rb:32 +#. Write dialog help 2/2 +#: src/include/dns-server/helps.rb:32 msgid "" "<p><b><big>Aborting Saving</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -1525,9 +1511,9 @@ " 대화 상자가 추가로 나타나서 지금 중단하는 것이 안전한지 알려줍니다.\n" " </p>" -#. zone dialog -#. help 1/5 -#: src/include/dns-server/helps.rb:39 +#. zone dialog +#. help 1/5 +#: src/include/dns-server/helps.rb:39 msgid "" "<p><b><big>Zone Name</big></b><br>\n" "Enter the name of the zone (domain) in <b>Zone Name</b>.</p>" @@ -1535,8 +1521,8 @@ "<p><b><big>영역 이름</big></b><br>\n" "<b>영역 이름</b>에 영역(도메인) 이름을 입력합니다.</p>" -#. help 2/5, alt. 1 -#: src/include/dns-server/helps.rb:43 +#. help 2/5, alt. 1 +#: src/include/dns-server/helps.rb:43 msgid "" "<p><b><big>Dynamic DNS Zone Updates</big></b><br>\n" "The zone can be updated automatically, usually because of dynamically\n" @@ -1552,8 +1538,8 @@ "설정하십시오. 이 키는 DHCP 서버와 DNS 서버 둘 다에 대해\n" "같아야 합니다.</p>" -#. help 3/5, only for alt. 1 -#: src/include/dns-server/helps.rb:52 +#. help 3/5, only for alt. 1 +#: src/include/dns-server/helps.rb:52 msgid "" "<p><b><big>Editing a DNS Zone</big></b><br>\n" "To edit the zone settings, choose the appropriate\n" @@ -1563,8 +1549,8 @@ "영역 설정을 편집하려면 테이블에서 해당 항목을\n" "선택한 다음 <b>편집</b>을 클릭합니다.</p>" -#. help 4/5, only for alt. 1 -#: src/include/dns-server/helps.rb:58 +#. help 4/5, only for alt. 1 +#: src/include/dns-server/helps.rb:58 msgid "" "<p>To add a new record to the zone, click <b>Add</b>. To remove\n" "a record, select it and click <b>Delete</b>.</p>" @@ -1572,8 +1558,8 @@ "<p>존 파일에 새로운 레코드를 추가하기 위해서 <b>추가</b>을 클릭하십시오. \n" "레코드를 삭제 하기 위해서 <b>삭제</b> 선택하고 클릭 하십시오.</p>" -#. help 5/5, only for alt. 1 -#: src/include/dns-server/helps.rb:62 +#. help 5/5, only for alt. 1 +#: src/include/dns-server/helps.rb:62 msgid "" "<p><b><big>SOA Record</big></b><br>\n" "To edit the SOA (Start of Authority) record of the zone, click\n" @@ -1583,29 +1569,25 @@ "영역의 SOA(권한 시작) 레코드를 편집하려면\n" "<b>SOA 편집</b>을 클릭합니다.</p>" -#. help 2/5 alt. 2 -#: src/include/dns-server/helps.rb:68 +#. help 2/5 alt. 2 +#: src/include/dns-server/helps.rb:68 msgid "" "<p><b><big>Master Servers</big></b><br>\n" -"Set the IP addresses of the master name servers for this zone. Use <b>Add\n" -"to add a new master name server. Select an existing one then click " -"<b>Delete</b>\n" +"Set the IP addresses of the master name servers for this zone. Use <b>Add</b>\n" +"to add a new master name server. Select an existing one then click <b>Delete</b>\n" "to remove an existing one.</p>" msgstr "" "<p><b><big>마스터 서버</big></b><br>\n" -"이 영역에 대한 마스터 이름 서버의 IP 주소를 설정합니다. 새 마스터 이름 서버" -"를\n" +"이 영역에 대한 마스터 이름 서버의 IP 주소를 설정합니다. 새 마스터 이름 서버를\n" " 추가하려면 <b>추가</b>를 사용합니다. 기존 서버를 제거하려면 해당 서버를\n" " 선택하고 <b>삭제</b>를 클릭합니다.</p>" -#. help 1/2 -#: src/include/dns-server/helps.rb:75 +#. help 1/2 +#: src/include/dns-server/helps.rb:75 msgid "" "<p><b><big>Zone Type</big></b><br>\n" "To make this name server the primary source of the data of the zone,\n" -"select <b>Master</b>. To make it the secondary name server, select <b>Slave\n" +"select <b>Master</b>. To make it the secondary name server, select <b>Slave</b>\n" "or <b>Stub</b>, so the data of the zone will be mirrored from the master\n" "server.</p>" msgstr "" @@ -1615,12 +1597,11 @@ "<b>종속</b> 또는 <b>스텁</b>을 선택하여 영역 데이터가\n" "마스터 서버에서 미러링되게 합니다.</p>" -#. help 2/2 -#: src/include/dns-server/helps.rb:83 +#. help 2/2 +#: src/include/dns-server/helps.rb:83 msgid "" "<p><b><big>Zone Direction</big></b><br>\n" -"DNS is used both for translating from domain names to IP addresses and " -"back.\n" +"DNS is used both for translating from domain names to IP addresses and back.\n" "Select if this zone will be used to translate from domain names to IP\n" "addresses (<b>Forward</b>) or from IP addresses to domain names\n" "(<b>Reverse</b>).</p>\n" @@ -1631,9 +1612,9 @@ "IP 주소에서 도메인 이름으로 변환\n" "(<b>역방향</b>)하는 데 사용되는 경우 선택합니다.</p>\n" -#. firewall dialog -#. help text 1/2 -#: src/include/dns-server/helps.rb:92 +#. firewall dialog +#. help text 1/2 +#: src/include/dns-server/helps.rb:92 msgid "" "<p><b><big>Interface Classes</big></b><br>\n" "Select which interface classes should have access to the DNS server. The\n" @@ -1643,8 +1624,8 @@ "DNS 서버에 대한 액세스 권한이 있어야 하는 인터페이스 클래스를 선택합니다.\n" "인터페이스 클래스는 방화벽 구성 구성요소에서 정의됩니다.</p>\n" -#. help text 2/2 -#: src/include/dns-server/helps.rb:98 +#. help text 2/2 +#: src/include/dns-server/helps.rb:98 msgid "" "<p><b><big>Adapting Firewall Settings</big></b><br>\n" "To adapt the firewall settings so that the DNS server can be accessed\n" @@ -1656,10 +1637,10 @@ "DNS 서버에 액세스할 수 있도록 방화벽 설정을 적용하려면\n" "<b>방화벽 설정 적용</b>을 선택합니다.</p>\n" -#. soa dialog -#. help text 1/9 -#. Zone Editor - Help for tab - Zone (SOA) 1/7 -#: src/include/dns-server/helps.rb:106 src/include/dns-server/helps.rb:355 +#. soa dialog +#. help text 1/9 +#. Zone Editor - Help for tab - Zone (SOA) 1/7 +#: src/include/dns-server/helps.rb:106 src/include/dns-server/helps.rb:355 msgid "" "<p><b><big>SOA Record Configuration</big></b><br>\n" "Set the entries of the SOA record.</p>" @@ -1667,8 +1648,8 @@ "<p><b><big>SOA 레코드 구성</big></b><br>\n" "SOA 레코드의 항목을 설정합니다.</p>" -#. help text 2/9 - TTL -#: src/include/dns-server/helps.rb:110 +#. help text 2/9 - TTL +#: src/include/dns-server/helps.rb:110 msgid "" "<p><b>$TTL</b> specifies the time to live for all records in the\n" "zone that do not have an explicit TTL.</p>" @@ -1676,8 +1657,8 @@ "<p><b>$TTL</b>은 영역에서 명시적 TTL이 없는 모든\n" "레코드에 대한 생존 시간을 지정합니다.</p>" -#. help text 3/9 - Primary source -#: src/include/dns-server/helps.rb:114 +#. help text 3/9 - Primary source +#: src/include/dns-server/helps.rb:114 msgid "" "<p><b>Primary Source</b> must contain the fully qualified domain name\n" "of the primary name server.</p>" @@ -1685,8 +1666,8 @@ "<p><b>주 원본</b>에는 주 이름 서버의 정규화된 도메인\n" "이름이 포함되어야 합니다.</p>" -#. help text 4/9 - Administrator's mail -#: src/include/dns-server/helps.rb:118 +#. help text 4/9 - Administrator's mail +#: src/include/dns-server/helps.rb:118 msgid "" "<p><b>Administrator's Mail</b> must contain the e-mail address of\n" "the administrator responsible for the zone.</p>\n" @@ -1694,21 +1675,20 @@ "<p><b>관리자 메일</b>에는 영역에 대한 책임 관리자의\n" "전자 메일 주소가 포함되어야 합니다.</p>\n" -#. help text 5/9 - Serial -#: src/include/dns-server/helps.rb:122 +#. help text 5/9 - Serial +#: src/include/dns-server/helps.rb:122 msgid "" "<p><b>Serial</b> number is used for determining if the zone has changed on\n" -"the master servers (so that slave servers do not always need to synchronize " -"the\n" +"the master servers (so that slave servers do not always need to synchronize the\n" "entire zone).</p>\n" msgstr "" "<p><b>일련</b> 번호는 슬레이브 서버에서 항상 전체 영역을\n" "동기화할 필요가 없도록 영역이 마스터 서버에서 변경되었는지 여부를\n" "확인하는 데 사용됩니다.</p>\n" -#. help text 6/9 - Refresh -#. Zone Editor - Help for tab - Zone (SOA) 4/7 -#: src/include/dns-server/helps.rb:128 src/include/dns-server/helps.rb:370 +#. help text 6/9 - Refresh +#. Zone Editor - Help for tab - Zone (SOA) 4/7 +#: src/include/dns-server/helps.rb:128 src/include/dns-server/helps.rb:370 msgid "" "<p><b>Refresh</b> sets how often the zone should be synchronized from\n" "master name server to slave name servers.</p>" @@ -1716,9 +1696,9 @@ "<p><b>새로 고침</b>은 마스터 이름 서버에서 종속 이름 서버로\n" "영역을 동기화하는 간격을 설정합니다.</p>" -#. help text 7/9 - Retry -#. Zone Editor - Help for tab - Zone (SOA) 5/7 -#: src/include/dns-server/helps.rb:132 src/include/dns-server/helps.rb:374 +#. help text 7/9 - Retry +#. Zone Editor - Help for tab - Zone (SOA) 5/7 +#: src/include/dns-server/helps.rb:132 src/include/dns-server/helps.rb:374 msgid "" "<p><b>Retry</b> sets how often slave servers try to synchronize\n" "the zone from the master server if synchronization fails.</p>" @@ -1726,8 +1706,8 @@ "<p><b>재시도</b>는 동기화 작업이 실패한 경우 종속 서버가 마스터\n" "서버에서 영역을 동기화하는 간격을 설정합니다.</p>" -#. help text 8/9 - Expiry -#: src/include/dns-server/helps.rb:136 +#. help text 8/9 - Expiry +#: src/include/dns-server/helps.rb:136 msgid "" "<p><b>Expiry</b> means the period after which the zone expires on slave\n" "servers and slave servers stop answering replies until it is synchronized.\n" @@ -1737,9 +1717,9 @@ "동기화될 때까지 종속 서버가 응답하지 않는 기간을 의미합니다.\n" "</p>" -#. help text 9/9 - Minimum -#. Zone Editor - Help for tab - Zone (SOA) 7/7 -#: src/include/dns-server/helps.rb:142 src/include/dns-server/helps.rb:384 +#. help text 9/9 - Minimum +#. Zone Editor - Help for tab - Zone (SOA) 7/7 +#: src/include/dns-server/helps.rb:142 src/include/dns-server/helps.rb:384 msgid "" "<p><b>Minimum</b> sets for how long the slave servers should cache\n" "negative answers (name resolution failed).</p>" @@ -1747,30 +1727,26 @@ "<p><b>최소</b>는 종속 서버가 네거티브 응답(이름 확인 실패)을\n" "캐시해야 하는 시간을 설정합니다.</p>" -#. ddns keys dialog -#. help text 1/1 -#: src/include/dns-server/helps.rb:147 +#. ddns keys dialog +#. help text 1/1 +#: src/include/dns-server/helps.rb:147 msgid "" "<p><b><big>TSIG Key Management</big></b><br>\n" "Define TSIG keys used for dynamic zone updates.\n" "To add a new TSIG key, use the \n" -"<b>File Name</b> text field or the <b>Browse</b> button then click <b>Add.\n" -"To delete an existing TSIG key, select it in the list and click <b>Delete.\n" +"<b>File Name</b> text field or the <b>Browse</b> button then click <b>Add</b>.\n" +"To delete an existing TSIG key, select it in the list and click <b>Delete</b>.\n" "</p>" msgstr "" "<p><b><big>TSIG 키 관리</big></b><br>\n" "동적 영역 업데이트에 사용되는 TSIG 키를 정의합니다.\n" "새 TSIG 키를 추가하려면 \n" -"<b>파일 이름</b> 텍스트 필드 또는 <b>찾아보기</b> 버튼을 사용한 다음 <b>추가" -"</b>를 클릭합니다.\n" -"기존 TSIG 키를 삭제하려면 목록에서 해당 키를 선택한 다음 <b>삭제</b>를 클릭합" -"니다.\n" +"<b>파일 이름</b> 텍스트 필드 또는 <b>찾아보기</b> 버튼을 사용한 다음 <b>추가</b>를 클릭합니다.\n" +"기존 TSIG 키를 삭제하려면 목록에서 해당 키를 선택한 다음 <b>삭제</b>를 클릭합니다.\n" "</p>" -#. Expert Mode Configuration - Start Up 1/3 -#: src/include/dns-server/helps.rb:156 +#. Expert Mode Configuration - Start Up 1/3 +#: src/include/dns-server/helps.rb:156 msgid "" "<p><b><big>Booting</big></b><br>\n" "To start the DNS server every time your computer is booted, set\n" @@ -1780,8 +1756,8 @@ "컴퓨터를 부팅할 때마다 DNS 서버를 시작하려면 이 옵션에 대해\n" "<b>설정</b>을 선택하고 그렇지 않은 경우에는 <b>해제</b>를 선택합니다.</p> " -#. Expert Mode Configuration - Start Up 1/3 -#: src/include/dns-server/helps.rb:163 +#. Expert Mode Configuration - Start Up 1/3 +#: src/include/dns-server/helps.rb:163 msgid "" "<p><b><big>LDAP Support</big></b><br>\n" "To store the DNS zones in LDAP instead of native configuration files,\n" @@ -1791,8 +1767,8 @@ "DNS 영역을 고유 구성 파일 대신 LDAP에 저장하려면\n" "<b>LDAP 지원 활성화</b>를 설정합니다.</p>" -#. Expert Mode Configuration - Start Up 3/3 -#: src/include/dns-server/helps.rb:170 +#. Expert Mode Configuration - Start Up 3/3 +#: src/include/dns-server/helps.rb:170 msgid "" "<p><b><big>Switch On or Off</big></b><br>\n" "To start or stop the DNS server immediately, use \n" @@ -1804,8 +1780,8 @@ "<b>DNS 서버 지금 시작</b> 또는\n" "<b>DNS 서버 지금 중지</b>를 사용합니다.</p>\n" -#. Expert Mode Configuration - Forwarders 1/3 -#: src/include/dns-server/helps.rb:177 +#. Expert Mode Configuration - Forwarders 1/3 +#: src/include/dns-server/helps.rb:177 msgid "" "<p><b><big>Forwarders</big></b><br>\n" "Forwarders are DNS servers to which your DNS server should send queries\n" @@ -1815,25 +1791,23 @@ "전달자는 DNS 서버에서 응답할 수 없는\n" "쿼리를 전송해야 하는 DNS 서버입니다.</p>\n" -#. Expert Mode Configuration - Forwarders 2/3 -#. _("<p>To ask forwarders during name resolution and in case of fail do full -#. DNS lookup, set <b>Forward First</b>. To ask forwarders only, set -#. <b>Forwarders Only</b>. To do full DNS lookup always, do not check any -#. of these check boxes.</p> -#. ") + -#. Expert Mode Configuration - Forwarders 3/3 -#: src/include/dns-server/helps.rb:190 +#. Expert Mode Configuration - Forwarders 2/3 +#. _("<p>To ask forwarders during name resolution and in case of fail do full +#. DNS lookup, set <b>Forward First</b>. To ask forwarders only, set +#. <b>Forwarders Only</b>. To do full DNS lookup always, do not check any +#. of these check boxes.</p> +#. ") + +#. Expert Mode Configuration - Forwarders 3/3 +#: src/include/dns-server/helps.rb:190 msgid "" "<p>To add a new forwarder, set its <b>IP Address</b> and click <b>Add</b>.\n" "To delete a configured forwarder, select it and click <b>Delete</b>.</p>" msgstr "" -"<p>새 전달자를 추가하려면 해당 <b>IP 주소</b>를 설정하고 <b>추가</b>를 클릭합" -"니다.\n" -"구성된 전달자를 삭제하려면 해당 전달자를 선택하고 <b>삭제</b>를 클릭합니다." +"<p>새 전달자를 추가하려면 해당 <b>IP 주소</b>를 설정하고 <b>추가</b>를 클릭합니다.\n" +"구성된 전달자를 삭제하려면 해당 전달자를 선택하고 <b>삭제</b>를 클릭합니다.</p>" -#. Expert Mode Configuration - Basic Options 1/2 -#: src/include/dns-server/helps.rb:194 +#. Expert Mode Configuration - Basic Options 1/2 +#: src/include/dns-server/helps.rb:194 msgid "" "<p><b><big>Edit DNS Server Options</big></b><br>\n" "Use this dialog to edit options of the DNS server.</p>" @@ -1841,8 +1815,8 @@ "<p><b><big>DNS 서버 옵션 편집</big></b><br>\n" "이 대화 상자를 사용하여 DNS 서버의 옵션을 편집할 수 있습니다.</p>" -#. Expert Mode Configuration - Basic Options 2/3 -#: src/include/dns-server/helps.rb:198 +#. Expert Mode Configuration - Basic Options 2/3 +#: src/include/dns-server/helps.rb:198 msgid "" "<p>To add new options, select the <b>Option</b>,\n" "enter its <b>Value</b>, and click <b>Add</b>.</p>\n" @@ -1854,14 +1828,13 @@ "<p>구성된 옵션을 수정하려면 테이블에서 해당 옵션을 선택하고\n" "<b>값</b>을 변경한 다음 <b>변경</b>을 클릭합니다.</p>\n" -#. Expert Mode Configuration - Basic Options 3/3 -#: src/include/dns-server/helps.rb:205 +#. Expert Mode Configuration - Basic Options 3/3 +#: src/include/dns-server/helps.rb:205 msgid "<p>To remove an option, select it and click <b>Delete</b>.</p>" -msgstr "" -"<p>옵션을 제거하려면 해당 옵션을 선택한 다음 <b>삭제</b>를 클릭합니다.</p>" +msgstr "<p>옵션을 제거하려면 해당 옵션을 선택한 다음 <b>삭제</b>를 클릭합니다.</p>" -#. Expert Mode Configuration - Logging 1/3 -#: src/include/dns-server/helps.rb:207 +#. Expert Mode Configuration - Logging 1/3 +#: src/include/dns-server/helps.rb:207 msgid "" "<p><b><big>Logging</big></b><br>\n" "Use this dialog to define various options of the DNS server logging.</p>" @@ -1869,31 +1842,27 @@ "<p><b><big>로깅</big></b><br>\n" "이 대화 상자를 사용하여 DNS 서버 로깅의 다양한 옵션을 정의할 수 있습니다.</p>" -#. Expert Mode Configuration - Logging 2/3 -#: src/include/dns-server/helps.rb:211 +#. Expert Mode Configuration - Logging 2/3 +#: src/include/dns-server/helps.rb:211 msgid "" "<p>\n" -"Select <b>Log to System Log</b> to save DNS server log messages to the " -"system log. \n" +"Select <b>Log to System Log</b> to save DNS server log messages to the system log. \n" "To save the DNS server log messages to a separate file, select \n" -"<b>Log to File</b> and set the <b>Filename</b> to which to save the log " -"and \n" +"<b>Log to File</b> and set the <b>Filename</b> to which to save the log and \n" "the <b>Maximum Size</b> of the log file.\n" -"The DNS server automatically rotates the log files. Use <b>Maximum Versions\n" +"The DNS server automatically rotates the log files. Use <b>Maximum Versions</b>\n" "to specify how many log files should be saved.</p>\n" msgstr "" "<p>\n" -"DNS 서버 로그 메시지를 시스템 로그에 저장하려면 <b>시스템 로그에 기록</b>을 " -"선택합니다. \n" +"DNS 서버 로그 메시지를 시스템 로그에 저장하려면 <b>시스템 로그에 기록</b>을 선택합니다. \n" " DNS 서버 로그 메시지를 별도의 파일에 저장하려면 \n" " <b>파일에 기록</b>을 선택하고 로그를 저장할 <b>파일 이름</b> 및 \n" " 로그 파일의 <b>최대 크기</b>를 설정합니다.\n" " DNS 서버는 자동으로 로그 파일들을 순환시킵니다. 저장할 로그 파일 수를\n" " 지정하려면 <b>최대 버전</b>을 사용합니다.</p>\n" -#. Expert Mode Configuration - Logging 3/3 -#: src/include/dns-server/helps.rb:221 +#. Expert Mode Configuration - Logging 3/3 +#: src/include/dns-server/helps.rb:221 msgid "" "<p>In <b>Additional Logging</b>,\n" "set which actions should be logged. Common actions are always logged.\n" @@ -1905,15 +1874,14 @@ msgstr "" "<p><b>추가 로깅</b>에서는\n" "어떤 작업을 기록할 것인지 설정합니다. 일반 작업은 항상 기록됩니다.\n" -"<b>모든 DNS 쿼리 기록</b>은 클라이언트에서 DNS 서버로 전송되는 모든 쿼리를 기" -"록합니다.\n" +"<b>모든 DNS 쿼리 기록</b>은 클라이언트에서 DNS 서버로 전송되는 모든 쿼리를 기록합니다.\n" "<b>영역 업데이트 기록</b>은 DNS가 업데이트된 시간을 기록합니다.\n" "<b>영역 전송 기록</b>은 영역이\n" "보조\n" "이름 서버로 완전히 전송된 시간을 기록합니다.</p>\n" -#. Expert Mode Configuration - ACLs 1/2 -#: src/include/dns-server/helps.rb:231 +#. Expert Mode Configuration - ACLs 1/2 +#: src/include/dns-server/helps.rb:231 msgid "" "<p><b><big>ACLs</big></b><br>\n" "In this dialog, define access control lists to control\n" @@ -1923,8 +1891,8 @@ "이 대화 상자에서는 영역에 대한 액세스를 제어하기 위해\n" "액세스 제어 목록을 정의합니다.</p>\n" -#. Expert Mode Configuration - ACLs 2/2 -#: src/include/dns-server/helps.rb:237 +#. Expert Mode Configuration - ACLs 2/2 +#: src/include/dns-server/helps.rb:237 msgid "" "<p>To add a new ACL entry, just enter the option's <b>Name</b>\n" "and <b>Value</b> then click <b>Add</b>. To remove an \n" @@ -1934,8 +1902,8 @@ "및 <b>값</b>을 입력하고 <b>추가</b>를 클릭하십시오.\n" "ACL 항목을 제거하려면 해당 항목을 선택하고 <b>삭제</b>를 클릭하십시오.</p>\n" -#. Expert Mode Configuration - Keys 1/3 -#: src/include/dns-server/helps.rb:243 +#. Expert Mode Configuration - Keys 1/3 +#: src/include/dns-server/helps.rb:243 msgid "" "<p><b><big>TSIG Keys</big></b><br>\n" "TSIG keys are used for authentication when remotely\n" @@ -1947,22 +1915,21 @@ "인증 작업에 사용됩니다. 이 키는 DNS 영역의\n" "동적 업데이트(DDNS)에 필요합니다.</p>\n" -#. Expert Mode Configuration - Keys 2/3 -#: src/include/dns-server/helps.rb:250 +#. Expert Mode Configuration - Keys 2/3 +#: src/include/dns-server/helps.rb:250 msgid "" "<p>To add an already created key, set the <b>Filename</b>\n" "(or use the <b>Browse</b> button to select it) and click <b>Add</b>.\n" "To generate a new key, enter the <b>Filename</b> and the <b>Key ID</b>\n" -"then click <b>Generate</b>. The new key will be generated and also added.\n" +"then click <b>Generate</b>. The new key will be generated and also added.</p>\n" msgstr "" "<p>이미 작성된 키를 추가하려면 <b>파일 이름</b>을 설정하고\n" "(또는 <b>찾아보기</b> 버튼을 사용하여 선택하고) <b>추가</b>를 클릭합니다.\n" " 새 키를 생성하려면 <b>파일 이름</b> 및 <b>키 ID</b>를 입력하고\n" " <b>생성</b>을 클릭합니다. 새 키가 생성 및 추가됩니다.</p>\n" -#. Expert Mode Configuration - Keys 3/3 -#: src/include/dns-server/helps.rb:257 +#. Expert Mode Configuration - Keys 3/3 +#: src/include/dns-server/helps.rb:257 msgid "" "<p>To remove an existing key, select it and\n" "click <b>Delete</b>.</p>" @@ -1970,8 +1937,8 @@ "<p>기존 키를 제거하려면 해당 키를 선택한 다음\n" "<b>삭제</b>를 클릭합니다.</p>" -#. Expert Mode Configuration - Zones #1 -#: src/include/dns-server/helps.rb:263 +#. Expert Mode Configuration - Zones #1 +#: src/include/dns-server/helps.rb:263 msgid "" "<p><b><big>DNS Zones</big></b><br>\n" "Use this dialog to manage the DNS zones.</p>\n" @@ -1979,57 +1946,48 @@ "<p><b><big>DNS 영역</big></b><br>\n" "이 대화 상자를 사용하여 DNS 영역을 관리할 수 있습니다.</p>\n" -#. Expert Mode Configuration - Zones #2 -#: src/include/dns-server/helps.rb:267 +#. Expert Mode Configuration - Zones #2 +#: src/include/dns-server/helps.rb:267 msgid "" -"<p>To add a new zone, enter its <b>Zone Name</b>, select the <b>Zone Type,\n" +"<p>To add a new zone, enter its <b>Zone Name</b>, select the <b>Zone Type</b>,\n" "and click <b>Add</b>.</p>\n" msgstr "" -"<p>새 영역을 추가하려면 <b>영역 이름</b>을 입력한 다음 <b>영역 유형</b>을 선" -"택하고\n" +"<p>새 영역을 추가하려면 <b>영역 이름</b>을 입력한 다음 <b>영역 유형</b>을 선택하고\n" "<b>추가</b>를 클릭합니다.</p>\n" -#. Expert Mode Configuration - Zones #3 -#: src/include/dns-server/helps.rb:271 +#. Expert Mode Configuration - Zones #3 +#: src/include/dns-server/helps.rb:271 msgid "" -"<p>To add a new IPv4 reverse zone, enter a part of the reverse IPv4 address " -"followed by\n" +"<p>To add a new IPv4 reverse zone, enter a part of the reverse IPv4 address followed by\n" "<tt>.in-addr.arpa</tt> as its <b>Zone Name</b> (for example, zone name\n" -"<tt>0.168.192.in-addr.arpa</tt> for network <tt>192.168.0.0/24</tt>), " -"select\n" +"<tt>0.168.192.in-addr.arpa</tt> for network <tt>192.168.0.0/24</tt>), select\n" "the <b>Zone Type</b>, and click <b>Add</b>.</p>\n" msgstr "" "<p>새 IPv4 역방향 영역을 추가하려면 역방향 IPv4 주소 일부를 입력한 후 \n" -"<tt>.in-addr.arpa</tt>를 <b>영역 이름</b>으로 입력합니다. 예를 들어, 네트워" -"크 \n" -"<tt>192.168.0.0/24</tt>의 영역 이름은 <tt>0.168.192.in-addr.arpa</tt>입니" -"다.\n" +"<tt>.in-addr.arpa</tt>를 <b>영역 이름</b>으로 입력합니다. 예를 들어, 네트워크 \n" +"<tt>192.168.0.0/24</tt>의 영역 이름은 <tt>0.168.192.in-addr.arpa</tt>입니다.\n" "그런 다음 <b>영역 유형</b>을 선택하고 <b>추가</b>를 클릭합니다.</p>\n" -#. Expert Mode Configuration - Zones #4 -#. %1, %2, %3, and %4 are replaced with examples -#: src/include/dns-server/helps.rb:280 +#. Expert Mode Configuration - Zones #4 +#. %1, %2, %3, and %4 are replaced with examples +#: src/include/dns-server/helps.rb:280 msgid "" -"<p>To add a new IPv6 reverse zone, enter a part of the reverse IPv6 address " -"followed by\n" -"<tt>%1</tt> as its <b>Zone Name</b>. Several formats for entering the zone " -"name are\n" +"<p>To add a new IPv6 reverse zone, enter a part of the reverse IPv6 address followed by\n" +"<tt>%1</tt> as its <b>Zone Name</b>. Several formats for entering the zone name are\n" "supported: Standard form: <tt>%2</tt>;\n" "Forward form: <tt>%3</tt>;\n" "Forward form without netmask bits: <tt>%4</tt>\n" "(by default <tt>64</tt> netmask bits are used).</p>\n" msgstr "" -"<p>새 IPv6 역방향 영역을 추가하려면 <b>영역 이름</b>으로 역방향 IPv6 주소의 " -"일부를 입력한 다음\n" +"<p>새 IPv6 역방향 영역을 추가하려면 <b>영역 이름</b>으로 역방향 IPv6 주소의 일부를 입력한 다음\n" "<tt>%1</tt>을(를) 입력합니다. 영역 이름을 입력하기 위한 다음 형식이\n" "지원됩니다. 표준 형식: <tt>%2</tt>,\n" "전달 형식: <tt>%3</tt>,\n" "전달 형식(넷마스크 비트 제외): <tt>%4</tt>\n" "(기본적으로 <tt>64</tt> 넷마스크 비트가 사용됨).</p>\n" -#. Expert Mode Configuration - Zones #5 -#: src/include/dns-server/helps.rb:295 +#. Expert Mode Configuration - Zones #5 +#: src/include/dns-server/helps.rb:295 msgid "" "<p>To modify settings for a zone, such as zone transport and name and\n" "mail servers, select it, and click <b>Edit</b>.\n" @@ -2037,23 +1995,21 @@ msgstr "" "<p>영역 전송, 이름 및 메일 서버와 같은 영역 설정을\n" "수정하려면 해당 설정을 선택하고 <b>편집</b>을 클릭하십시오.\n" -"구성된 영역을 제거하려면 해당 영역을 선택하고 <b>삭제</b>를 클릭하십시오.\n" +"구성된 영역을 제거하려면 해당 영역을 선택하고 <b>삭제</b>를 클릭하십시오.</p>\n" -#. Zone Editor - Help for tab - Basics 1/3 -#: src/include/dns-server/helps.rb:303 +#. Zone Editor - Help for tab - Basics 1/3 +#: src/include/dns-server/helps.rb:303 msgid "" "<p><b><big>DDNS and Zone Transport</big></b><br>\n" -"Use this dialog to change dynamic DNS settings of the zone and control " -"access\n" +"Use this dialog to change dynamic DNS settings of the zone and control access\n" "to the zone.</p>\n" msgstr "" "<p><b><big>DDNS 및 영역 전송</big></b><br>\n" "이 대화 상자를 사용하여 영역의 동적 DNS 설정을 변경하고\n" "해당 영역에 대한 액세스를 제어할 수 있습니다.</p>\n" -#. Zone Editor - Help for tab - Basics 2/3 -#: src/include/dns-server/helps.rb:311 +#. Zone Editor - Help for tab - Basics 2/3 +#: src/include/dns-server/helps.rb:311 msgid "" "<p>\n" "To allow dynamic updates of the zone, set <b>Allow Dynamic Updates</b>\n" @@ -2065,8 +2021,8 @@ " <b>TSIG 키</b>를 선택합니다. 영역을 동적으로 업데이트하려면 적어도\n" " TSIG 키를 하나는 정의해야 합니다.</p>\n" -#. Zone Editor - Help for tab - Basics 3/3 -#: src/include/dns-server/helps.rb:319 +#. Zone Editor - Help for tab - Basics 3/3 +#: src/include/dns-server/helps.rb:319 msgid "" "<p>\n" "To allow transports of the zone, set <b>Enable Zone Transport</b>\n" @@ -2080,8 +2036,8 @@ " 선택합니다. 영역 전송을 허용하려면 ACL을 적어도 하나는\n" " 정의해야 합니다.</p>" -#. Zone Editor - Help -#: src/include/dns-server/helps.rb:327 +#. Zone Editor - Help +#: src/include/dns-server/helps.rb:327 msgid "" "<p>\n" "Reverse zone records can be generated from another master zone.\n" @@ -2093,8 +2049,8 @@ "<b>자동으로 레코드 생성 기능</b>\n" "확인란을 선택한 후 레코드를 생성할 영역을 선택하십시오.</p>\n" -#. Zone Editor - Help -#: src/include/dns-server/helps.rb:334 +#. Zone Editor - Help +#: src/include/dns-server/helps.rb:334 msgid "" "<p>\n" "If this is not a reverse zone, you can see which zones are generated\n" @@ -2104,23 +2060,21 @@ "역방향 영역이 아닌 경우 <b>연결된 역방향 영역</b> 필드에서\n" "현재 생성된 영역을 확인할 수 있습니다.</p>" -#. Zone Editor - Help for tab - Name Servers -#: src/include/dns-server/helps.rb:340 +#. Zone Editor - Help for tab - Name Servers +#: src/include/dns-server/helps.rb:340 msgid "" "<p><b><big>NS Records</big></b><br>\n" -"To add a new name server, enter the name server address and click <b>Add.\n" +"To add a new name server, enter the name server address and click <b>Add</b>.\n" "To remove one of the listed name servers, select it and click\n" "<b>Delete</b>.</p>\n" msgstr "" "<p><b><big>NS 레코드</big></b><br>\n" -"새 이름 서버를 추가하려면 이름 서버 주소를 입력하고 <b>추가</b>를 클릭합니" -"다.\n" +"새 이름 서버를 추가하려면 이름 서버 주소를 입력하고 <b>추가</b>를 클릭합니다.\n" " 열거된 이름 서버 중 하나를 제거하려면 해당 서버를 선택하고\n" " <b>삭제</b>를 클릭합니다.</p>\n" -#. Zone Editor - Help for tab - Mail Servers -#: src/include/dns-server/helps.rb:347 +#. Zone Editor - Help for tab - Mail Servers +#: src/include/dns-server/helps.rb:347 msgid "" "<p><b><big>MX Records</big></b><br>\n" "To add a new mail server, enter the <b>Address</b> and <b>Priority</b>\n" @@ -2134,13 +2088,12 @@ " 열거된 메일 서버 중 하나를 제거하려면 해당 서버를 선택하고\n" " <b>삭제</b>를 클릭합니다.</p>\n" -#. Zone Editor - Help for tab - Zone (SOA) 2/7 -#: src/include/dns-server/helps.rb:359 +#. Zone Editor - Help for tab - Zone (SOA) 2/7 +#: src/include/dns-server/helps.rb:359 msgid "" "<p><b>Serial</b> is the number used for determining if the zone has \n" "changed on\n" -"the master servers (then slave servers do not always need to synchronize " -"the\n" +"the master servers (then slave servers do not always need to synchronize the\n" "entire zone).</p>\n" msgstr "" "<p><b>일련</b>은 영역이 마스터 서버에서 \n" @@ -2148,8 +2101,8 @@ "확인하는 데 사용되는 번호입니다(그러면 슬레이브 서버에서 항상 전체 영역을\n" "동기화할 필요가 없음).</p>\n" -#. Zone Editor - Help for tab - Zone (SOA) 3/7 -#: src/include/dns-server/helps.rb:366 +#. Zone Editor - Help for tab - Zone (SOA) 3/7 +#: src/include/dns-server/helps.rb:366 msgid "" "<p><b>TTL</b> specifies the time to live for all records in the\n" "zone that do not have an explicit TTL.</p>" @@ -2157,8 +2110,8 @@ "<p><b>TTL</b>은 영역에서 명시적 TTL이 없는 모든\n" "레코드에 대한 생존 시간을 지정합니다.</p>" -#. Zone Editor - Help for tab - Zone (SOA) 6/7 -#: src/include/dns-server/helps.rb:378 +#. Zone Editor - Help for tab - Zone (SOA) 6/7 +#: src/include/dns-server/helps.rb:378 msgid "" "<p><b>Expiration</b> means the period after which the zone expires on slave\n" "servers and slave servers stop answering replies until it is synchronized.\n" @@ -2168,8 +2121,8 @@ "슬레이브 서버는 동기화가 이루어질 때까지 응답을 중지합니다.\n" " </p>" -#. Zone Editor - Help for tab - Records 1/7 or 1/5 -#: src/include/dns-server/helps.rb:388 +#. Zone Editor - Help for tab - Records 1/7 or 1/5 +#: src/include/dns-server/helps.rb:388 msgid "" "<p><b><big>Records</big></b><br>\n" "In this dialog, edit the resource records of the zone. To add new resource\n" @@ -2181,20 +2134,19 @@ " 추가하려면 <b>레코드 키</b>, <b>형식</b> 및 <b>값</b>을 설정한 다음\n" " <b>추가</b>를 클릭합니다.</p>" -#. Zone Editor - Help for tab - Records 2/7 or 2/5 -#: src/include/dns-server/helps.rb:395 +#. Zone Editor - Help for tab - Records 2/7 or 2/5 +#: src/include/dns-server/helps.rb:395 msgid "" "<p>To change an existing record, select it, modify the desired entries,\n" "and click <b>Change</b>. To delete a record, select it and click\n" "<b>Delete</b>.</p>" msgstr "" "<p>기존 레코드를 변경하려면 해당 레코드를 선택하고 원하는\n" -"항목을 수정한 다음 <b>변경</b>을 클릭합니다. 레코드를 삭제하려면 해당 레코드" -"를\n" +"항목을 수정한 다음 <b>변경</b>을 클릭합니다. 레코드를 삭제하려면 해당 레코드를\n" " 선택하고 <b>삭제</b>를 클릭합니다.</p>" -#. Zone Editor - Help for tab - Records 3/7 or 3/5 -#: src/include/dns-server/helps.rb:401 +#. Zone Editor - Help for tab - Records 3/7 or 3/5 +#: src/include/dns-server/helps.rb:401 msgid "" "<p>\n" "Each type of record has its own syntax defined in the RFC.</p>\n" @@ -2202,8 +2154,8 @@ "<p>\n" "각 레코드 형식에는 RFC에 정의된 고유한 구문이 있습니다.</p>\n" -#. Zone Editor - Help for tab - Records 4/7 (alt. 1) -#: src/include/dns-server/helps.rb:405 +#. Zone Editor - Help for tab - Records 4/7 (alt. 1) +#: src/include/dns-server/helps.rb:405 msgid "" "<p><b>A: Domain Name Translation</b>:\n" "<b>Record Key</b> is a hostname without domain or a fully qualified \n" @@ -2215,8 +2167,8 @@ " 정규화된 호스트 이름입니다.\n" " <b>값</b>은 IP 주소입니다.</p>" -#. Zone Editor - Help for tab - Records 5/7 (alt. 1) -#: src/include/dns-server/helps.rb:412 +#. Zone Editor - Help for tab - Records 5/7 (alt. 1) +#: src/include/dns-server/helps.rb:412 msgid "" "<p><b>CNAME: Alias for Domain Name</b>:\n" "<b>Record Key</b> is a hostname relative to the current zone or a fully\n" @@ -2232,13 +2184,12 @@ " 정규화된 호스트 이름입니다. 이것은 반드시 A 레코드로\n" " 표현해야 합니다.</p>\n" -#. Zone Editor - Help for tab - Records 6/7 (alt. 1) -#. Zone Editor - Help for tab - Records 5/5 (alt. 2) -#: src/include/dns-server/helps.rb:421 src/include/dns-server/helps.rb:448 +#. Zone Editor - Help for tab - Records 6/7 (alt. 1) +#. Zone Editor - Help for tab - Records 5/5 (alt. 2) +#: src/include/dns-server/helps.rb:421 src/include/dns-server/helps.rb:448 msgid "" "<p><b>NS: Name Server</b>:\n" -"<b>Record Key</b> is a zone name relative to the current zone or an " -"absolute\n" +"<b>Record Key</b> is a zone name relative to the current zone or an absolute\n" "domain name followed by a dot.\n" "<b>Value</b> is a hostname relative to the current zone or fully qualified\n" "hostname followed by a dot. It must be represented by an A record.</p>\n" @@ -2249,8 +2200,8 @@ " <b>값</b>은 현재 영역에 상대적인 호스트 이름이거나 뒤에 점이 오는\n" " 정규화된 호스트 이름입니다. 이것은 반드시 A 레코드로 표현해야 합니다.</p>\n" -#. Zone Editor - Help for tab - Records 7/7 (alt. 1) -#: src/include/dns-server/helps.rb:429 +#. Zone Editor - Help for tab - Records 7/7 (alt. 1) +#: src/include/dns-server/helps.rb:429 msgid "" "<p><b>MX: Mail Relay</b>:\n" "<b>Record Key</b> is a hostname or zone name relative to the current zone\n" @@ -2264,14 +2215,13 @@ " <b>값</b>은 현재 영역에 상대적인 호스트 이름이거나 뒤에 점이 오는\n" " 정규화된 호스트 이름입니다. 이것은 반드시 A 레코드로 표현해야 합니다.</p>\n" -#. Zone Editor - Help for tab - Records 4/5 (alt. 2) -#: src/include/dns-server/helps.rb:437 +#. Zone Editor - Help for tab - Records 4/5 (alt. 2) +#: src/include/dns-server/helps.rb:437 msgid "" "<p><b>PTR: Reverse Translation</b>:\n" "<b>Record Key</b> is a full reverse zone name (derived from the IP address)\n" "followed by a dot\n" -"(such as <tt>1.0.168.192.in-addr.arpa.</tt> for IP address <tt>192.168.0.1)\n" +"(such as <tt>1.0.168.192.in-addr.arpa.</tt> for IP address <tt>192.168.0.1</tt>)\n" " or a part of reverse zone name relative to the current zone\n" "(such as <tt>1</tt> for IP address <tt>192.168.0.1</tt> in zone\n" "<tt>0.168.192.in-addr.arpa.</tt>).\n" @@ -2280,15 +2230,14 @@ "<p><b>PTR: 역방향 변환</b>:\n" "<b>레코드 키</b>는 IP 주소에서 파생된 것으로 뒤에 점이 오는\n" " 완전한 역방향 영역 이름이거나\n" -" (예: IP 주소 <tt>192.168.0.1</tt>의 경우 <tt>1.0.168.192.in-addr.arpa.)\n" +" (예: IP 주소 <tt>192.168.0.1</tt>의 경우 <tt>1.0.168.192.in-addr.arpa.</tt>)\n" " 현재 영역에 상대적인 역방향 영역 이름의 일부입니다\n" " (예: <tt>0.168.192.in-addr.arpa.</tt> 영역의 IP\n" " 주소<tt>192.168.0.1</tt>의 경우 <tt>1</tt>).\n" " <b>값</b>은 뒤에 점이 오는 정규화된 호스트 이름입니다.</p>\n" -#. Final step of the installation wizard - 1/5 -#: src/include/dns-server/helps.rb:456 +#. Final step of the installation wizard - 1/5 +#: src/include/dns-server/helps.rb:456 msgid "" "<p><b><big>Finishing the Configuration</big></b></p>\n" "<p>Check the entered settings before finishing the configuration.</p> \n" @@ -2296,8 +2245,8 @@ "<p><b><big>구성 완료</big></b></p>\n" "<p>구성을 완료하기 전에 입력한 설정을 검토하십시오.</p> \n" -#. Final step of the installation wizard - 2/5 -#: src/include/dns-server/helps.rb:460 +#. Final step of the installation wizard - 2/5 +#: src/include/dns-server/helps.rb:460 msgid "" "<p>Select <b>Open Port in Firewall</b> to adapt the\n" "SuSEfirewall2 settings to allow all connections to your DNS server.</p>" @@ -2305,8 +2254,8 @@ "<p><b>방화벽 포트 열기</b>를 선택하고 SuSEfirewall2\n" "설정을 적용하여 DNS 서버에 대한 모든 연결을 허용하십시오.</p>" -#. Final step of the installation wizard - 3/5 -#: src/include/dns-server/helps.rb:464 +#. Final step of the installation wizard - 3/5 +#: src/include/dns-server/helps.rb:464 msgid "" "<p>\n" "To start the DNS server every time your computer is booted, set the \n" @@ -2314,11 +2263,10 @@ msgstr "" "<p>\n" "컴퓨터를 부팅할 때마다 DNS 서버를 시작하려면 \n" -"시작 동작을 <b>켜기</b>로 지정하십시오. 그렇지 않으면 <b>끄기</b>로 설정하십" -"시오.</p> \n" +"시작 동작을 <b>켜기</b>로 지정하십시오. 그렇지 않으면 <b>끄기</b>로 설정하십시오.</p> \n" -#. Final step of the installation wizard - 4/5 -#: src/include/dns-server/helps.rb:471 +#. Final step of the installation wizard - 4/5 +#: src/include/dns-server/helps.rb:471 msgid "" "<p>\n" "To store the DNS zones in LDAP instead of native configuration files,\n" @@ -2328,8 +2276,8 @@ "고유 구성 파일 대신 LDAP에 DNS 영역을 저장하려면\n" " <b>LDAP 지원 활성화</b>를 설정하십시오.</p>" -#. Final step of the installation wizard - 5/5 -#: src/include/dns-server/helps.rb:478 +#. Final step of the installation wizard - 5/5 +#: src/include/dns-server/helps.rb:478 msgid "" "<p>\n" "To enter the expert mode of the DNS server configuration, click\n" @@ -2339,8 +2287,8 @@ "DNS 서버 구성의 고급 모드로 들어가려면,\n" " <b>DNS 서버 고급 구성</b>을 클릭하십시오.</p>" -#. slave zone help text 1/2 -#: src/include/dns-server/helps.rb:484 +#. slave zone help text 1/2 +#: src/include/dns-server/helps.rb:484 msgid "" "<p><big><b>Slave DNS Zone</b></big><br>\n" "Each slave zone must have the master name server defined. Use\n" @@ -2350,8 +2298,8 @@ "각 슬레이브 영역마다 마스터 이름 서버를 정의해야 합니다. 마스터\n" " 이름 서버를 정의하려면 <b>마스터 DNS 서버 IP</b>를 사용합니다.</p>" -#. slave zone help text 2/2 -#: src/include/dns-server/helps.rb:490 +#. slave zone help text 2/2 +#: src/include/dns-server/helps.rb:490 msgid "" "<p><big><b>Zone Transport</b></big><br>\n" "To allow transports of the zone, set <b>Enable Zone Transport</b>\n" @@ -2365,8 +2313,8 @@ " 선택합니다. 영역 전송을 허용하려면 ACL을 적어도 하나는\n" " 정의해야 합니다.</p>" -#. forward zone help text 1/2 -#: src/include/dns-server/helps.rb:498 +#. forward zone help text 1/2 +#: src/include/dns-server/helps.rb:498 msgid "" "<p><big><b>Forward DNS Zone</b></big><br>\n" "This type of DNS zone only forwards DNS queries to forwarders\n" @@ -2376,8 +2324,8 @@ "이 형식의 DNS 영역은 자신에 정의된 전달자에게만 DNS 조회를\n" " 전달합니다.</p>" -#. forward zone help text 2/2 -#: src/include/dns-server/helps.rb:504 +#. forward zone help text 2/2 +#: src/include/dns-server/helps.rb:504 msgid "" "<p>If there are no forwarders defined, all DNS queries\n" "for the respective zone are denied, because there is no DNS\n" @@ -2387,152 +2335,152 @@ " 없기 때문에 해당 영역에 대한 DNS 조회가 모두\n" " 거부됩니다.</p>" -#. %1 is usually an IP address -#: src/include/dns-server/options.rb:159 +#. %1 is usually an IP address +#: src/include/dns-server/options.rb:159 msgid "Unknown Record Type: %1" msgstr "알 수 없는 레코드 형식: %1" -#. table entry, %1 is IP address -#: src/include/dns-server/options.rb:180 +#. table entry, %1 is IP address +#: src/include/dns-server/options.rb:180 msgid "Host %1" msgstr "호스트: %1" -#. combo box item, A is more technical description -#: src/include/dns-server/options.rb:188 +#. combo box item, A is more technical description +#: src/include/dns-server/options.rb:188 msgid "A -- Domain Name Translation" msgstr "A -- 도메인 이름 변환" -#. text entry -#: src/include/dns-server/options.rb:201 +#. text entry +#: src/include/dns-server/options.rb:201 msgid "&IP Addresses" msgstr "IP 주소(&I)" -#. table entry, %1 is host name -#: src/include/dns-server/options.rb:218 +#. table entry, %1 is host name +#: src/include/dns-server/options.rb:218 msgid "Alias for %1" msgstr "Alias for %1" -#. combo box item, CNAME is more technical description -#: src/include/dns-server/options.rb:226 +#. combo box item, CNAME is more technical description +#: src/include/dns-server/options.rb:226 msgid "CNAME -- Alias for Domain Name" msgstr "CNAME -- 도메인 이름의 별칭" -#. text entry -#: src/include/dns-server/options.rb:237 +#. text entry +#: src/include/dns-server/options.rb:237 msgid "&Alias" msgstr "앨리어스(&A)" -#. text entry -#: src/include/dns-server/options.rb:240 +#. text entry +#: src/include/dns-server/options.rb:240 msgid "&Base Host Name" msgstr "베이스 호스트 이름(&H)" -#. table entry, %1 is host name -#: src/include/dns-server/options.rb:257 +#. table entry, %1 is host name +#: src/include/dns-server/options.rb:257 msgid "Pointer to %1" msgstr "Pointer to %1" -#. combo box item, PTR is more technical description -#: src/include/dns-server/options.rb:265 +#. combo box item, PTR is more technical description +#: src/include/dns-server/options.rb:265 msgid "PTR -- Reverse Translation" msgstr "PTR -- 역변환" -#. text entry -#: src/include/dns-server/options.rb:276 +#. text entry +#: src/include/dns-server/options.rb:276 msgid "&IP Address" msgstr "IP 주소(&I)" -#. table entry, %1 is host name -#: src/include/dns-server/options.rb:295 +#. table entry, %1 is host name +#: src/include/dns-server/options.rb:295 msgid "Name Server %1" msgstr "이름 서버 %1" -#. combo box item, NS is more technical description -#: src/include/dns-server/options.rb:303 +#. combo box item, NS is more technical description +#: src/include/dns-server/options.rb:303 msgid "NS -- Name Server" msgstr "NS -- 이름 서버" -#. text entry -#: src/include/dns-server/options.rb:314 +#. text entry +#: src/include/dns-server/options.rb:314 msgid "&Domain" msgstr "도메인(&D)" -#. text entry -#: src/include/dns-server/options.rb:317 +#. text entry +#: src/include/dns-server/options.rb:317 msgid "&Name Server" msgstr "이름 서버(&N)" -#. table entry, %1 is host name, %2 is integer -#: src/include/dns-server/options.rb:337 +#. table entry, %1 is host name, %2 is integer +#: src/include/dns-server/options.rb:337 msgid "Mail Relay %1, Priority %2" msgstr "메일 릴레이 %1, 우선 순위 %2" -#. combo box item, MX is more technical description -#: src/include/dns-server/options.rb:416 +#. combo box item, MX is more technical description +#: src/include/dns-server/options.rb:416 msgid "MX -- Mail Relay" msgstr "MX -- 메일 릴레이" -#. text entry -#: src/include/dns-server/options.rb:429 +#. text entry +#: src/include/dns-server/options.rb:429 msgid "&Domain Name" msgstr "도메인 이름(&D)" -#. text entry -#: src/include/dns-server/options.rb:432 +#. text entry +#: src/include/dns-server/options.rb:432 msgid "&Mail Relay" msgstr "메일 릴레이(&M)" -#. DNS server read dialog caption -#: src/modules/DnsServer.pm:969 +#. DNS server read dialog caption +#: src/modules/DnsServer.pm:969 msgid "Initializing DNS Server Configuration" msgstr "DNS 서버 설정 초기화" -#. progress stage -#: src/modules/DnsServer.pm:973 +#. progress stage +#: src/modules/DnsServer.pm:973 msgid "Check the environment" msgstr "환경 검사." -#. progress stage -#: src/modules/DnsServer.pm:975 src/modules/DnsServer.pm:1346 +#. progress stage +#: src/modules/DnsServer.pm:975 src/modules/DnsServer.pm:1346 msgid "Flush caches of the DNS daemon" msgstr "DNS 데몬의 캐시 플러시" -#. progress stage -#: src/modules/DnsServer.pm:977 +#. progress stage +#: src/modules/DnsServer.pm:977 msgid "Read the firewall settings" msgstr "방화벽 설정 읽기" -#. progress stage -#: src/modules/DnsServer.pm:979 +#. progress stage +#: src/modules/DnsServer.pm:979 msgid "Read the settings" msgstr "설정값 읽기" -#. progress step -#: src/modules/DnsServer.pm:983 +#. progress step +#: src/modules/DnsServer.pm:983 msgid "Checking the environment..." msgstr "환경 검사중..." -#. progress step -#: src/modules/DnsServer.pm:985 src/modules/DnsServer.pm:1362 +#. progress step +#: src/modules/DnsServer.pm:985 src/modules/DnsServer.pm:1362 msgid "Flushing caches of the DNS daemon..." msgstr "DNS 데몬의 캐시를 플러시하는 중..." -#. progress step -#: src/modules/DnsServer.pm:987 +#. progress step +#: src/modules/DnsServer.pm:987 msgid "Reading the firewall settings..." msgstr "방화벽 설정 읽는 중..." -#. progress step -#: src/modules/DnsServer.pm:989 +#. progress step +#: src/modules/DnsServer.pm:989 msgid "Reading the settings..." msgstr "설정값을 읽는 중입니다..." -#. progress step -#: src/modules/DnsServer.pm:991 src/modules/DnsServer.pm:1376 +#. progress step +#: src/modules/DnsServer.pm:991 src/modules/DnsServer.pm:1376 msgid "Finished" msgstr "완료됨" -#: src/modules/DnsServer.pm:1275 +#: src/modules/DnsServer.pm:1275 msgid "" "Error occurred while calling netconfig.\n" "Error: " @@ -2540,73 +2488,73 @@ "netconfig를 호출하는 중에 오류가 발생했습니다.\n" "오류: " -#. DNS server read dialog caption -#: src/modules/DnsServer.pm:1342 +#. DNS server read dialog caption +#: src/modules/DnsServer.pm:1342 msgid "Saving DNS Server Configuration" msgstr "DNS 서버 구성 저장중" -#. progress stage -#: src/modules/DnsServer.pm:1348 +#. progress stage +#: src/modules/DnsServer.pm:1348 msgid "Save configuration files" msgstr "구성 파일 저장" -#. progress stage -#: src/modules/DnsServer.pm:1350 +#. progress stage +#: src/modules/DnsServer.pm:1350 msgid "Restart the DNS daemon" msgstr "DNS 데몬 재시작" -#. progress stage -#: src/modules/DnsServer.pm:1352 +#. progress stage +#: src/modules/DnsServer.pm:1352 msgid "Update zone files" msgstr "영역 파일 업데이트" -#. progress stage -#: src/modules/DnsServer.pm:1354 +#. progress stage +#: src/modules/DnsServer.pm:1354 msgid "Adjust the DNS service" msgstr "DNS 서비스 조정" -#. progress stage -#: src/modules/DnsServer.pm:1356 +#. progress stage +#: src/modules/DnsServer.pm:1356 msgid "Call netconfig" msgstr "Netconfig 호출" -#. progress stage -#: src/modules/DnsServer.pm:1358 +#. progress stage +#: src/modules/DnsServer.pm:1358 msgid "Write the firewall settings" msgstr "방화벽 설정 쓰기" -#. progress step -#: src/modules/DnsServer.pm:1364 +#. progress step +#: src/modules/DnsServer.pm:1364 msgid "Saving configuration files..." msgstr "구성 파일을 저장하는 중..." -#. progress step -#: src/modules/DnsServer.pm:1366 +#. progress step +#: src/modules/DnsServer.pm:1366 msgid "Restarting the DNS daemon..." msgstr "DNS 데몬을 재시작하는 중..." -#. progress step -#: src/modules/DnsServer.pm:1368 +#. progress step +#: src/modules/DnsServer.pm:1368 msgid "Updating zone files..." msgstr "영역 파일을 업데이트하는 중..." -#. progress step -#: src/modules/DnsServer.pm:1370 +#. progress step +#: src/modules/DnsServer.pm:1370 msgid "Adjusting the DNS service..." msgstr "DNS 서비스를 조정하는 중..." -#. progress step -#: src/modules/DnsServer.pm:1372 +#. progress step +#: src/modules/DnsServer.pm:1372 msgid "Calling netconfig..." msgstr "netconfig 호출 중..." -#. progress step -#: src/modules/DnsServer.pm:1374 +#. progress step +#: src/modules/DnsServer.pm:1374 msgid "Writing the firewall settings..." msgstr "방화벽 설정 쓰는 중..." -#. Cannot start service 'named', because of error that follows Error:. Do not translate named. -#: src/modules/DnsServer.pm:1547 +#. Cannot start service 'named', because of error that follows Error:. Do not translate named. +#: src/modules/DnsServer.pm:1547 msgid "" "Error occurred while starting service named.\n" "\n" @@ -2614,44 +2562,44 @@ "명명된 서비스를 시작하는 중 오류가 발생했습니다.\n" "\n" -#. type of zone to be used in summary -#: src/modules/DnsServer.pm:1671 +#. type of zone to be used in summary +#: src/modules/DnsServer.pm:1671 msgid "Stub" msgstr "스텁" -#. type of zone to be used in summary -#: src/modules/DnsServer.pm:1673 +#. type of zone to be used in summary +#: src/modules/DnsServer.pm:1673 msgid "Hint" msgstr "힌트" -#. summary string -#: src/modules/DnsServer.pm:1682 +#. summary string +#: src/modules/DnsServer.pm:1682 msgid "The DNS server starts when booting the system." msgstr "DNS 서버는 그 시스템이 부팅할 때 시작합니다." -#. summary string -#: src/modules/DnsServer.pm:1688 +#. summary string +#: src/modules/DnsServer.pm:1688 msgid "The DNS server does not start when booting the system." msgstr "DNS 서버는 시스템이 부팅될 때 시작되지 않습니다." -#. summary string, %s is list of DNS zones (their names), coma separated -#: src/modules/DnsServer.pm:1716 +#. summary string, %s is list of DNS zones (their names), coma separated +#: src/modules/DnsServer.pm:1716 #, perl-format msgid "Configured Zones: %s" msgstr "구성된 영역: %s" -#. error message -#: src/modules/DnsServer.pm:1730 +#. error message +#: src/modules/DnsServer.pm:1730 msgid "Invalid LDAP configuration. Cannot use LDAP." msgstr "LDAP 구성이 잘못되었습니다. LDAP를 사용할 수 없습니다." -#. yes-no popup -#: src/modules/DnsServer.pm:1811 +#. yes-no popup +#: src/modules/DnsServer.pm:1811 msgid "Enable LDAP support?" msgstr "LDAP 지원을 사용하시겠습니까?" -#. error popup -#: src/modules/DnsServer.pm:1899 +#. error popup +#: src/modules/DnsServer.pm:1899 msgid "" "Installation of required packages failed.\n" "LDAP support will not be active." @@ -2659,30 +2607,27 @@ "요청한 패키지 설치에 실패했습니다.\n" "LDAP 지원이 활성화되지 않습니다." -#. BNC #679960 -#: src/modules/DnsServer.pm:1958 +#. BNC #679960 +#: src/modules/DnsServer.pm:1958 msgid "Unknown LDAP initialization error." msgstr "알 수 없는 LDAP 초기화 오류." -#. TRANSLATORS: Popup error message, %1 is an LDAP object whose creation failed -#: src/modules/DnsServer.pm:1994 +#. TRANSLATORS: Popup error message, %1 is an LDAP object whose creation failed +#: src/modules/DnsServer.pm:1994 msgid "Error occurred while creating %1." msgstr "%1을(를) 생성하는 동안 오류가 발생했습니다." -#. error report, %1 is ldap object -#: src/modules/DnsServer.pm:2030 +#. error report, %1 is ldap object +#: src/modules/DnsServer.pm:2030 msgid "Error occurred while creating cn=defaultDNS,%1. Not using LDAP." -msgstr "" -"cn=defaultDNS,%1을(를) 생성하는 동안 오류가 발생했습니다. LDAP를 사용하고 있" -"지 않습니다." +msgstr "cn=defaultDNS,%1을(를) 생성하는 동안 오류가 발생했습니다. LDAP를 사용하고 있지 않습니다." -#. error report, %1 is LDAP record DN -#: src/modules/DnsServer.pm:2056 +#. error report, %1 is LDAP record DN +#: src/modules/DnsServer.pm:2056 msgid "Error occurred while updating %1." msgstr "%1을(를) 업데이트하는 동안 오류가 발생했습니다." -#. error report, %1 is LDAP record DN -#: src/modules/DnsServer.pm:2091 +#. error report, %1 is LDAP record DN +#: src/modules/DnsServer.pm:2091 msgid "Error occurred while creating %1. Not using LDAP." -msgstr "" -"%1을(를) 생성하는 동안 오류가 발생했습니다. LDAP를 사용하고 있지 않습니다." +msgstr "%1을(를) 생성하는 동안 오류가 발생했습니다. LDAP를 사용하고 있지 않습니다." Modified: branches/SLE12-SP3/yast/ko/po/docker.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/docker.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/docker.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,271 +14,264 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Copyright (c) 2014 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/ydocker/changes_dialog.rb:71 +#. Copyright (c) 2014 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/ydocker/changes_dialog.rb:71 msgid "Changes in Container" msgstr "컨테이너 변경 사항" -#: src/lib/ydocker/changes_dialog.rb:79 +#: src/lib/ydocker/changes_dialog.rb:79 msgid "Path" msgstr "경로" -#: src/lib/ydocker/changes_dialog.rb:80 src/lib/ydocker/main_dialog.rb:235 +#: src/lib/ydocker/changes_dialog.rb:80 src/lib/ydocker/main_dialog.rb:235 msgid "Status" msgstr "상태" -#. TODO translation -#: src/lib/ydocker/changes_dialog.rb:110 src/lib/ydocker/main_dialog.rb:304 +#. TODO translation +#: src/lib/ydocker/changes_dialog.rb:110 src/lib/ydocker/main_dialog.rb:304 msgid "&Exit" msgstr "종료(&E)" -#. Copyright (c) 2014 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/ydocker/commit_dialog.rb:81 +#. Copyright (c) 2014 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/ydocker/commit_dialog.rb:81 msgid "Commit Container" msgstr "컨테이너 커밋" -#: src/lib/ydocker/commit_dialog.rb:90 src/lib/ydocker/main_dialog.rb:217 +#: src/lib/ydocker/commit_dialog.rb:90 src/lib/ydocker/main_dialog.rb:217 msgid "Repository" msgstr "리포지토리" -#: src/lib/ydocker/commit_dialog.rb:96 +#: src/lib/ydocker/commit_dialog.rb:96 msgid "Name" msgstr "이름" -#: src/lib/ydocker/commit_dialog.rb:102 src/lib/ydocker/main_dialog.rb:218 +#: src/lib/ydocker/commit_dialog.rb:102 src/lib/ydocker/main_dialog.rb:218 msgid "Tag" msgstr "태그" -#: src/lib/ydocker/commit_dialog.rb:105 +#: src/lib/ydocker/commit_dialog.rb:105 msgid "Author" msgstr "작성자" -#: src/lib/ydocker/commit_dialog.rb:106 +#: src/lib/ydocker/commit_dialog.rb:106 msgid "Message" msgstr "메시지" -#: src/lib/ydocker/commit_dialog.rb:112 -#: src/lib/ydocker/inject_shell_dialog.rb:92 -#: src/lib/ydocker/run_image_dialog.rb:162 +#: src/lib/ydocker/commit_dialog.rb:112 +#: src/lib/ydocker/inject_shell_dialog.rb:92 +#: src/lib/ydocker/run_image_dialog.rb:162 msgid "&Ok" msgstr "확인(&O)" -#: src/lib/ydocker/commit_dialog.rb:113 -#: src/lib/ydocker/inject_shell_dialog.rb:93 -#: src/lib/ydocker/run_image_dialog.rb:163 +#: src/lib/ydocker/commit_dialog.rb:113 +#: src/lib/ydocker/inject_shell_dialog.rb:93 +#: src/lib/ydocker/run_image_dialog.rb:163 msgid "&Cancel" msgstr "취소(&C)" -#. Copyright (c) 2014 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/ydocker/inject_shell_dialog.rb:75 +#. Copyright (c) 2014 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/ydocker/inject_shell_dialog.rb:75 msgid "Inject Shell" msgstr "셸 삽입" -#: src/lib/ydocker/inject_shell_dialog.rb:84 +#: src/lib/ydocker/inject_shell_dialog.rb:84 msgid "Target Shell" msgstr "대상 셸" -#: src/lib/ydocker/inject_shell_dialog.rb:110 +#: src/lib/ydocker/inject_shell_dialog.rb:110 msgid "Failed to run terminal. Error: %{error}" msgstr "터미널을 실행할 수 없습니다. 오류: %{error}" -#. Only root can start process -#: src/lib/ydocker/main_dialog.rb:74 -msgid "" -"Docker service does not run. Should YaST start docker? Otherwise YaST quits." -msgstr "" -"Docker 서비스가 실행되지 않습니다. YaST에서 Docker를 시작합니까? 그렇지 않으" -"면 YaST가 종료됩니다." +#. Only root can start process +#: src/lib/ydocker/main_dialog.rb:74 +msgid "Docker service does not run. Should YaST start docker? Otherwise YaST quits." +msgstr "Docker 서비스가 실행되지 않습니다. YaST에서 Docker를 시작합니까? 그렇지 않으면 YaST가 종료됩니다." -#: src/lib/ydocker/main_dialog.rb:78 -msgid "" -"Docker service does not run. Run this module as root or start docker service " -"manually." -msgstr "" -"Docker 서비스가 실행되지 않습니다. 이 모듈을 루트로 실행하거나 Docker 서비스" -"를 수동으로 시작하십시오." +#: src/lib/ydocker/main_dialog.rb:78 +msgid "Docker service does not run. Run this module as root or start docker service manually." +msgstr "Docker 서비스가 실행되지 않습니다. 이 모듈을 루트로 실행하거나 Docker 서비스를 수동으로 시작하십시오." -#: src/lib/ydocker/main_dialog.rb:141 +#: src/lib/ydocker/main_dialog.rb:141 msgid "Communication with docker failed with error: %s. Please try again." msgstr "Docker와의 통신 실패 오류: %s. 다시 시도하십시오." -#: src/lib/ydocker/main_dialog.rb:152 +#: src/lib/ydocker/main_dialog.rb:152 msgid "Do you really want to stop the running container?" msgstr "정말로 컨테이너 실행을 정지합니까?" -#: src/lib/ydocker/main_dialog.rb:154 src/lib/ydocker/main_dialog.rb:163 +#: src/lib/ydocker/main_dialog.rb:154 src/lib/ydocker/main_dialog.rb:163 msgid "Do you want to remove the container?" msgstr "컨테이너를 제거하시겠습니까?" -#: src/lib/ydocker/main_dialog.rb:161 +#: src/lib/ydocker/main_dialog.rb:161 msgid "Do you really want to kill the running container?" msgstr "실행 중인 컨테이너를 종료하시겠습니까?" -#: src/lib/ydocker/main_dialog.rb:173 +#: src/lib/ydocker/main_dialog.rb:173 msgid "&Images" msgstr "이미지(&I)" -#: src/lib/ydocker/main_dialog.rb:174 +#: src/lib/ydocker/main_dialog.rb:174 msgid "&Containers" msgstr "컨테이너(&C)" -#: src/lib/ydocker/main_dialog.rb:184 +#: src/lib/ydocker/main_dialog.rb:184 msgid "Docker Images" msgstr "Docker 이미지" -#: src/lib/ydocker/main_dialog.rb:194 +#: src/lib/ydocker/main_dialog.rb:194 msgid "Running Docker Containers" msgstr "Docker 컨테이너 실행 중" -#: src/lib/ydocker/main_dialog.rb:219 +#: src/lib/ydocker/main_dialog.rb:219 msgid "Image ID" msgstr "이미지 ID" -#: src/lib/ydocker/main_dialog.rb:220 src/lib/ydocker/main_dialog.rb:234 +#: src/lib/ydocker/main_dialog.rb:220 src/lib/ydocker/main_dialog.rb:234 msgid "Created" msgstr "만든일시" -#: src/lib/ydocker/main_dialog.rb:221 +#: src/lib/ydocker/main_dialog.rb:221 msgid "Virtual Size" msgstr "가상 크기" -#: src/lib/ydocker/main_dialog.rb:231 +#: src/lib/ydocker/main_dialog.rb:231 msgid "Container ID" msgstr "컨테이너 ID" -#: src/lib/ydocker/main_dialog.rb:232 +#: src/lib/ydocker/main_dialog.rb:232 msgid "Image" msgstr "이미지" -#: src/lib/ydocker/main_dialog.rb:233 src/lib/ydocker/run_image_dialog.rb:127 +#: src/lib/ydocker/main_dialog.rb:233 src/lib/ydocker/run_image_dialog.rb:127 msgid "Command" msgstr "명령" -#: src/lib/ydocker/main_dialog.rb:236 src/lib/ydocker/run_image_dialog.rb:123 +#: src/lib/ydocker/main_dialog.rb:236 src/lib/ydocker/run_image_dialog.rb:123 msgid "Ports" msgstr "포트" -#: src/lib/ydocker/main_dialog.rb:283 src/lib/ydocker/main_dialog.rb:293 +#: src/lib/ydocker/main_dialog.rb:283 src/lib/ydocker/main_dialog.rb:293 msgid "Re&fresh" msgstr "새로 고침(&F)" -#: src/lib/ydocker/main_dialog.rb:284 +#: src/lib/ydocker/main_dialog.rb:284 msgid "R&un" msgstr "실행(&U)" -#: src/lib/ydocker/main_dialog.rb:285 +#: src/lib/ydocker/main_dialog.rb:285 msgid "&Delete" msgstr "삭제(&D)" -#: src/lib/ydocker/main_dialog.rb:294 +#: src/lib/ydocker/main_dialog.rb:294 msgid "S&how Changes" msgstr "변경 사항 표시(&H)" -#: src/lib/ydocker/main_dialog.rb:295 +#: src/lib/ydocker/main_dialog.rb:295 msgid "Inject &Terminal" msgstr "터미널 삽입(&T)" -#: src/lib/ydocker/main_dialog.rb:296 +#: src/lib/ydocker/main_dialog.rb:296 msgid "&Stop Container" msgstr "컨테이너 정지(&S)" -#: src/lib/ydocker/main_dialog.rb:297 +#: src/lib/ydocker/main_dialog.rb:297 msgid "&Kill Container" msgstr "컨테이너 종료(&K)" -#: src/lib/ydocker/main_dialog.rb:298 +#: src/lib/ydocker/main_dialog.rb:298 msgid "&Commit" msgstr "커밋(&C)" -#: src/lib/ydocker/main_dialog.rb:315 +#: src/lib/ydocker/main_dialog.rb:315 msgid "Do you really want to delete image \"%s\"?" msgstr "이미지 \"%s\"을(를) 정말로 삭제합니까?" -#. Copyright (c) 2014 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/ydocker/run_image_dialog.rb:90 +#. Copyright (c) 2014 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/ydocker/run_image_dialog.rb:90 msgid "Run Container" msgstr "컨테이너 실행" -#: src/lib/ydocker/run_image_dialog.rb:100 +#: src/lib/ydocker/run_image_dialog.rb:100 msgid "Host" msgstr "호스트" -#: src/lib/ydocker/run_image_dialog.rb:101 +#: src/lib/ydocker/run_image_dialog.rb:101 msgid "Container" msgstr "컨테이너" -#: src/lib/ydocker/run_image_dialog.rb:108 +#: src/lib/ydocker/run_image_dialog.rb:108 msgid "Add" msgstr "추가" -#: src/lib/ydocker/run_image_dialog.rb:112 +#: src/lib/ydocker/run_image_dialog.rb:112 msgid "Remove" msgstr "제거" -#: src/lib/ydocker/run_image_dialog.rb:122 +#: src/lib/ydocker/run_image_dialog.rb:122 msgid "Volumes" msgstr "볼륨" -#: src/lib/ydocker/run_image_dialog.rb:168 +#: src/lib/ydocker/run_image_dialog.rb:168 msgid "Choose directory to share" msgstr "공유할 디렉토리 선택" -#: src/lib/ydocker/run_image_dialog.rb:173 +#: src/lib/ydocker/run_image_dialog.rb:173 msgid "Choose target directory" msgstr "대상 디렉토리 선택" -#: src/lib/ydocker/run_image_dialog.rb:200 +#: src/lib/ydocker/run_image_dialog.rb:200 msgid "Choose external port" msgstr "외부 포트 선택" -#: src/lib/ydocker/run_image_dialog.rb:201 +#: src/lib/ydocker/run_image_dialog.rb:201 msgid "Choose internal port" msgstr "내부 포트 선택" Modified: branches/SLE12-SP3/yast/ko/po/drbd.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/drbd.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/drbd.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,100 +14,100 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xdrbd module -#: src/clients/drbd.rb:54 +#. Command line help text for the Xdrbd module +#: src/clients/drbd.rb:54 msgid "Configuration of DRBD" msgstr "DRBD 구성" -#. Rich text title for Drbd in proposals -#: src/clients/drbd_proposal.rb:86 +#. Rich text title for Drbd in proposals +#: src/clients/drbd_proposal.rb:86 msgid "DRBD" msgstr "DRBD" -#. Menu title for Drbd in proposals -#: src/clients/drbd_proposal.rb:88 +#. Menu title for Drbd in proposals +#: src/clients/drbd_proposal.rb:88 msgid "&DRBD" msgstr "DRBD(&D)" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/drbd/dialogs.ycp -#. Package: Configuration of drbd -#. Summary: Dialogs definitions -#. Authors: xwhu -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/drbd/common.rb:44 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/drbd/dialogs.ycp +#. Package: Configuration of drbd +#. Summary: Dialogs definitions +#. Authors: xwhu +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/drbd/common.rb:44 msgid "Start-up Configuration" msgstr "시작 구성" -#: src/include/drbd/common.rb:45 +#: src/include/drbd/common.rb:45 msgid "Global Configuration" msgstr "전체 구성" -#: src/include/drbd/common.rb:46 +#: src/include/drbd/common.rb:46 msgid "Resource Configuration" msgstr "리소스 구성" -#: src/include/drbd/common.rb:47 +#: src/include/drbd/common.rb:47 msgid "LVM Configuration" msgstr "LVM 구성" -#: src/include/drbd/common.rb:48 +#: src/include/drbd/common.rb:48 msgid "Resource Basic Configuration" msgstr "리소스 기본 구성" -#: src/include/drbd/common.rb:49 +#: src/include/drbd/common.rb:49 msgid "Resource Advanced Configuration" msgstr "리소스 고급 구성" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/drbd/dialogs.ycp -#. Package: Configuration of drbd -#. Summary: Dialogs definitions -#. Authors: xwhu -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/drbd/dialogs.rb:51 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/drbd/dialogs.ycp +#. Package: Configuration of drbd +#. Summary: Dialogs definitions +#. Authors: xwhu +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/drbd/dialogs.rb:51 msgid "Warning: YaST2 DRBD module will rename all\n" msgstr "경고: YaST2 DRBD 모듈은 지원되는 스키마에\n" -#: src/include/drbd/dialogs.rb:52 +#: src/include/drbd/dialogs.rb:52 msgid "" "included files for DRBD into a supported schema.\n" "\n" @@ -117,49 +117,49 @@ "\n" "계속하시겠습니까?" -#: src/include/drbd/dialogs.rb:69 +#: src/include/drbd/dialogs.rb:69 msgid "Failed to read DRBD configuration file:\n" msgstr "DRBD 구성 파일을 읽지 못했습니다.\n" -#: src/include/drbd/dialogs.rb:86 +#: src/include/drbd/dialogs.rb:86 msgid "Failed to write configuration to disk:\n" msgstr "구성을 디스크에 쓰는 데 실패했습니다.\n" -#. Drbd configure1 dialog caption -#. Drbd configure2 dialog caption -#: src/include/drbd/dialogs.rb:99 src/include/drbd/dialogs.rb:138 +#. Drbd configure1 dialog caption +#. Drbd configure2 dialog caption +#: src/include/drbd/dialogs.rb:99 src/include/drbd/dialogs.rb:138 msgid "DRBD Configuration" msgstr "DRBD 구성" -#. Drbd configure1 dialog contents -#: src/include/drbd/dialogs.rb:102 +#. Drbd configure1 dialog contents +#: src/include/drbd/dialogs.rb:102 msgid "First part of configuration of DRBD" msgstr "CASA 구성 첫 번째 부분" -#. Drbd configure2 dialog contents -#: src/include/drbd/dialogs.rb:141 +#. Drbd configure2 dialog contents +#: src/include/drbd/dialogs.rb:141 msgid "Second part of configuration of DRBD" msgstr "CASA 구성 두 번째 부분" -#. encoding: utf-8 -#: src/include/drbd/global_conf.rb:36 +#. encoding: utf-8 +#: src/include/drbd/global_conf.rb:36 msgid "Global Configuration of DRBD" msgstr "DRBD의 전체 구성" -#: src/include/drbd/global_conf.rb:42 +#: src/include/drbd/global_conf.rb:42 msgid "Minor Count" msgstr "마이너 카운트" -#: src/include/drbd/global_conf.rb:51 +#: src/include/drbd/global_conf.rb:51 msgid "Dialog Refresh" msgstr "대화 상자 새로 고침" -#: src/include/drbd/global_conf.rb:61 +#: src/include/drbd/global_conf.rb:61 msgid "Disable IP Verification" msgstr "IP 확인 비활성화" -#. Read dialog help 1/2 -#: src/include/drbd/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/drbd/helps.rb:36 msgid "" "<p><b><big>Initializing DRBD Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -167,8 +167,8 @@ "<p><b><big>구성 초기화</big></b><br>\n" "잠시 기다려 주십시오.<br></p>\n" -#. Read dialog help 2/2 -#: src/include/drbd/helps.rb:40 +#. Read dialog help 2/2 +#: src/include/drbd/helps.rb:40 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -176,8 +176,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/drbd/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/drbd/helps.rb:44 msgid "" "<p><b><big>Saving DRBD Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -185,8 +185,8 @@ "<p><b><big>DRBD 구성 저장</big></b><br>\n" "잠시 기다려 주십시오.<br></p>\n" -#. Write dialog help 2/2 -#: src/include/drbd/helps.rb:48 +#. Write dialog help 2/2 +#: src/include/drbd/helps.rb:48 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -198,15 +198,15 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#: src/include/drbd/helps.rb:54 +#: src/include/drbd/helps.rb:54 msgid "Start to configure DRBD." msgstr "DRBD 구성을 시작합니다." -#: src/include/drbd/helps.rb:55 +#: src/include/drbd/helps.rb:55 msgid "<p><b><big>Startup Configuration of DRBD</big></b></p>" msgstr "<p><b><big>DRBD의 시작 구성</big></b></p>" -#: src/include/drbd/helps.rb:58 +#: src/include/drbd/helps.rb:58 msgid "" "<p><b>Booting:</b></p>\n" "\t\t\t<p>checking \"On\" to start DRBD server Now and when booting</p>\n" @@ -222,246 +222,146 @@ "\t\t\t<p>DRBD 서버를 지금 시작 또는 중지</p>\n" "\t\t" -#: src/include/drbd/helps.rb:66 src/include/drbd/helps.rb:72 -#: src/include/drbd/helps.rb:86 +#: src/include/drbd/helps.rb:66 src/include/drbd/helps.rb:72 +#: src/include/drbd/helps.rb:86 msgid "<p><b><big>Resource Configuration of DRBD</big></b></p>" msgstr "<p><b><big>DRBD의 리소스 구성</big></b></p>" -#: src/include/drbd/helps.rb:69 +#: src/include/drbd/helps.rb:69 msgid "" -"<p>Clicking \"Add\", \"Edit\", \"Delete\" button to add, edit or delete a " -"resource</p>\n" +"<p>Clicking \"Add\", \"Edit\", \"Delete\" button to add, edit or delete a resource</p>\n" "\t\t" msgstr "" -"<p>리소스를 추가, 편집 또는 삭제하려면 \"추가\", \"편집\", \"삭제\" 버튼 클릭" -"</p>\n" +"<p>리소스를 추가, 편집 또는 삭제하려면 \"추가\", \"편집\", \"삭제\" 버튼 클릭</p>\n" "\t\t" -#: src/include/drbd/helps.rb:75 +#: src/include/drbd/helps.rb:75 msgid "" "\n" -"\t\t<p>\"Name\" is mandatory and must match the Linux host name (uname -n) " -"of one of the nodes. Should not include \".\" in hostname.</p>\n" -"\t\t<p>\"Address:Port\": A resource needs one IP address per device, which " -"is used to wait for incoming connections from the partner device to reach " -"the device. Each DRBD resource needs a TCP port which is used to connect to " -"the node's partner device. For IPv6, the actual address that follows the " -"ipv6 keyword must be placed inside brackets: ipv6 [2001:1945:fc03:" -"abcd::1]:7788</p>\n" -"\t\t<p>\"Device\": The name of the block device node of the resource being " -"described. You must use this device with your application (file system) and " -"you must not use the low level block device which is specified with the disk " -"parameter,following its minor number. Otherwise, you may omit the name, or " -"the word minor and its number. If you omit the name a default of /dev/" -"drbd'minor number' will be used.\n" -"\t\tLike: '/dev/drbd{service} minor {minor drbd number [0...255]}' or '/dev/" -"drbd{minor drbd number [0...255]}'</p>\n" -"\t\t<p>\"Disk\": DRBD uses this block device to actually store and retrieve " -"the data. Never access such a device while DRBD is running on top of it.\n" -"\t\t<p>\"Meta-disk\": internal. Internal means that the last part of the " -"backing device is used to store the meta-data.</p>\n" -"\t\t<p>\"Node-id\": Node id is an internal value for drbd, will be generated " -"by yast automatically. A host can have different \"node-id\" in different " -"resources.</p>\n" +"\t\t<p>\"Name\" is mandatory and must match the Linux host name (uname -n) of one of the nodes. Should not include \".\" in hostname.</p>\n" +"\t\t<p>\"Address:Port\": A resource needs one IP address per device, which is used to wait for incoming connections from the partner device to reach the device. Each DRBD resource needs a TCP port which is used to connect to the node's partner device. For IPv6, the actual address that follows the ipv6 keyword must be placed inside brackets: ipv6 [2001:1945:fc03:abcd::1]:7788</p>\n" +"\t\t<p>\"Device\": The name of the block device node of the resource being described. You must use this device with your application (file system) and you must not use the low level block device which is specified with the disk parameter,following its minor number. Otherwise, you may omit the name, or the word minor and its number. If you omit the name a default of /dev/drbd'minor number' will be used.\n" +"\t\tLike: '/dev/drbd{service} minor {minor drbd number [0...255]}' or '/dev/drbd{minor drbd number [0...255]}'</p>\n" +"\t\t<p>\"Disk\": DRBD uses this block device to actually store and retrieve the data. Never access such a device while DRBD is running on top of it.</p>\n" +"\t\t<p>\"Meta-disk\": internal. Internal means that the last part of the backing device is used to store the meta-data.</p>\n" +"\t\t<p>\"Node-id\": Node id is an internal value for drbd, will be generated by yast automatically. A host can have different \"node-id\" in different resources.</p>\n" "\t\t" msgstr "" "\n" -"\t\t<p>\"Name\"은 필수 항목이며 노드 중 하나의 Linux 호스트 이름(uname -n)과 " -"일치해야 합니다. 호스트 이름에 \".\"가 포함되지 않아야 합니다.</p>\n" -"\t\t<p>\"Address:Port\": 리소스에는 장치별로 하나의 IP 주소가 필요합니다. 이 " -"IP 주소는 파트너 장치에서 이 장치에 연결하기 위한 수신 연결을 기다리는 데 사" -"용됩니다. 각 DRBD 리소스에는 노드의 파트너 장치에 연결하는 데 사용되는 TCP 포" -"트가 필요합니다.</p>\n" -"\t\t<p>\"Device\": 설명 중인 리소스의 블록 장치 노드 이름입니다. 응용 프로그" -"램(파일 시스템)에서 이 장치를 사용해야 합니다. 디스크 파라미터와 뒤에 오는 보" -"조 번호로 지정하는 낮은 수준의 블록 장치를 사용해서는 안 됩니다. 또는 이름이" -"나 보조 단어 및 번호를 생략할 수도 있습니다. 이름을 생략하면 /dev/drbd'minor " -"number' 기본값이 사용됩니다.\n" -"\t\t예: '/dev/drbd{service} minor {minor drbd number [0...255]}' 또는 '/dev/" -"drbd{minor drbd number [0...255]}'</p>\n" -"\t\t<p>\"Disk\": DRBD는 이 블록 장치를 사용하여 데이터를 실제로 저장하고 검색" -"합니다. DRBD를 실행할 때는 사용 중인 장치에 액세스하지 마십시오.</p>\n" -"\t\t<p>\"Meta-disk\": 내부 디스크로, 지원 장치의 마지막 부분이 메타 데이터를 " -"저장하는 데 사용됩니다.</p>\n" -"\t\t<p>\"Node-id\": 노드 IDsms drbd에 대한 내부 값으로 yast에서 자동 생성됩니" -"다. 호스트는 다른 리소스에서 다른 \"node-id\"를 가질 수 있습니다.</p>\n" +"\t\t<p>\"Name\"은 필수 항목이며 노드 중 하나의 Linux 호스트 이름(uname -n)과 일치해야 합니다. 호스트 이름에 \".\"가 포함되지 않아야 합니다.</p>\n" +"\t\t<p>\"Address:Port\": 리소스에는 장치별로 하나의 IP 주소가 필요합니다. 이 IP 주소는 파트너 장치에서 이 장치에 연결하기 위한 수신 연결을 기다리는 데 사용됩니다. 각 DRBD 리소스에는 노드의 파트너 장치에 연결하는 데 사용되는 TCP 포트가 필요합니다.</p>\n" +"\t\t<p>\"Device\": 설명 중인 리소스의 블록 장치 노드 이름입니다. 응용 프로그램(파일 시스템)에서 이 장치를 사용해야 합니다. 디스크 파라미터와 뒤에 오는 보조 번호로 지정하는 낮은 수준의 블록 장치를 사용해서는 안 됩니다. 또는 이름이나 보조 단어 및 번호를 생략할 수도 있습니다. 이름을 생략하면 /dev/drbd'minor number' 기본값이 사용됩니다.\n" +"\t\t예: '/dev/drbd{service} minor {minor drbd number [0...255]}' 또는 '/dev/drbd{minor drbd number [0...255]}'</p>\n" +"\t\t<p>\"Disk\": DRBD는 이 블록 장치를 사용하여 데이터를 실제로 저장하고 검색합니다. DRBD를 실행할 때는 사용 중인 장치에 액세스하지 마십시오.</p>\n" +"\t\t<p>\"Meta-disk\": 내부 디스크로, 지원 장치의 마지막 부분이 메타 데이터를 저장하는 데 사용됩니다.</p>\n" +"\t\t<p>\"Node-id\": 노드 IDsms drbd에 대한 내부 값으로 yast에서 자동 생성됩니다. 호스트는 다른 리소스에서 다른 \"node-id\"를 가질 수 있습니다.</p>\n" "\t\t" -#: src/include/drbd/helps.rb:89 +#: src/include/drbd/helps.rb:89 msgid "" "\n" "\t\t<p><b>Protocol</b></p>\n" -"\t\t<p>Protocol A: write IO is reported as completed, if it has reached " -"local disk and local TCP send buffer.</p>\n" -"\t\t<p>Protocol B: write IO is reported as completed, if it has reached " -"local disk and remote buffer cache.</p>\n" -"\t\t<p>Protocol C: write IO is reported as completed, if it has reached both " -"local and remote disk.</p>\n" +"\t\t<p>Protocol A: write IO is reported as completed, if it has reached local disk and local TCP send buffer.</p>\n" +"\t\t<p>Protocol B: write IO is reported as completed, if it has reached local disk and remote buffer cache.</p>\n" +"\t\t<p>Protocol C: write IO is reported as completed, if it has reached both local and remote disk.</p>\n" "\t\t\t\t\t\t\t\t\t\t \n" "\t\t<p><b>wfc-timeout</b>: Wait for connection timeout</p>\n" -"\t\t<p><b>degr-wfc-timeout</b>: Wait for connection timeout, if this node " -"was a degraded cluster</p>\n" +"\t\t<p><b>degr-wfc-timeout</b>: Wait for connection timeout, if this node was a degraded cluster</p>\n" "\n" -"\t\t<p><b>on-io-error</b>: What to do when the lower level device reports io-" -"error to the upper layers</p>\n" +"\t\t<p><b>on-io-error</b>: What to do when the lower level device reports io-error to the upper layers</p>\n" "\t\t<p><b>sndbuf-size</b>: The size of the TCP socket send buffer</p>\n" -"\t\t<p><b>max-buffers</b>: Maximum number of requests to be allocated by " -"DRBD</p>\n" +"\t\t<p><b>max-buffers</b>: Maximum number of requests to be allocated by DRBD</p>\n" "\n" -"\t\t<p><b>timeout</b>: If the partner node fails to send an expected " -"response packet within time 10ths of a second, the partner node is " -"considered dead and therefore the TCP/IP connection is abandoned. This must " -"be lower than connect-int and ping-int. The default value is 60 = 6 seconds, " -"the unit 0.1 seconds.</p>\n" -"\t\t<p><b>connect-int</b>: The time the peer has time to answer to a keep-" -"alive packet. In case the peer's reply is not received within this time " -"period, it is considered as dead. The default value is 500ms, the default " -"unit is 100ms</p>\n" -"\t\t<p><b>ping-int</b>: The time the peer has time to answer to a keep-alive " -"packet</p>\n" +"\t\t<p><b>timeout</b>: If the partner node fails to send an expected response packet within time 10ths of a second, the partner node is considered dead and therefore the TCP/IP connection is abandoned. This must be lower than connect-int and ping-int. The default value is 60 = 6 seconds, the unit 0.1 seconds.</p>\n" +"\t\t<p><b>connect-int</b>: The time the peer has time to answer to a keep-alive packet. In case the peer's reply is not received within this time period, it is considered as dead. The default value is 500ms, the default unit is 100ms</p>\n" +"\t\t<p><b>ping-int</b>: The time the peer has time to answer to a keep-alive packet</p>\n" "\n" -"\t\t<p><b>max-epoch-size</b>: The highest number of data blocks between two " -"write barriers</p>\n" -"\t\t<p><b>ko-count</b>: the secondary node fails to complete a single write " -"request for count times the timeout, it is expelled from the cluster. The " -"default value is 0, which disables this feature.</p>\n" -"\t\t<p><b>rate</b>: To ensure a smooth operation of the application on top " -"of DRBD, it is possible to limit the bandwidth which may be used by " -"background synchronizations. The default is 250 KB/sec, the default unit is " -"KB/sec.</p>\n" -"\t\t<p><b>al-extents</b>: parameter you control how big the hot area (= " -"active set) can get. The default number of extents is 127. (Minimum: 7, " -"Maximum: 3843)</p>\n" +"\t\t<p><b>max-epoch-size</b>: The highest number of data blocks between two write barriers</p>\n" +"\t\t<p><b>ko-count</b>: the secondary node fails to complete a single write request for count times the timeout, it is expelled from the cluster. The default value is 0, which disables this feature.</p>\n" +"\t\t<p><b>rate</b>: To ensure a smooth operation of the application on top of DRBD, it is possible to limit the bandwidth which may be used by background synchronizations. The default is 250 KB/sec, the default unit is KB/sec.</p>\n" +"\t\t<p><b>al-extents</b>: parameter you control how big the hot area (= active set) can get. The default number of extents is 127. (Minimum: 7, Maximum: 3843)</p>\n" "\t\t" msgstr "" "\n" "\t\t<p><b>프로토콜</b></p>\n" -"\t\t<p>프로토콜 A: 쓰기 IO가 로컬 디스크 및 로컬 TCP 전송 버퍼에 도달하면 완" -"료된 것으로 보고됩니다.</p>\n" -"\t\t<p>Protocol B: 쓰기 IO가 로컬 디스크 및 원격 버퍼 캐시에 도달하면 완료된 " -"것으로 보고됩니다.</p>\n" -"\t\t<p>프로토콜 C: 쓰기 IO가 로컬 디스크와 원격 디스크에 모두 도달하면 완료" -"된 것으로 보고됩니다.</p>\n" +"\t\t<p>프로토콜 A: 쓰기 IO가 로컬 디스크 및 로컬 TCP 전송 버퍼에 도달하면 완료된 것으로 보고됩니다.</p>\n" +"\t\t<p>Protocol B: 쓰기 IO가 로컬 디스크 및 원격 버퍼 캐시에 도달하면 완료된 것으로 보고됩니다.</p>\n" +"\t\t<p>프로토콜 C: 쓰기 IO가 로컬 디스크와 원격 디스크에 모두 도달하면 완료된 것으로 보고됩니다.</p>\n" "\t\t\t\t\t\t\t\t\t\t \n" "\t\t<p><b>wfc-timeout</b>: 연결 시간 제한 대기</p>\n" -"\t\t<p><b>degr-wfc-timeout</b>: 이 노드가 강등된 클러스터인 경우 연결 시간 제" -"한 대기</p>\n" +"\t\t<p><b>degr-wfc-timeout</b>: 이 노드가 강등된 클러스터인 경우 연결 시간 제한 대기</p>\n" "\n" -"\t\t<p><b>on-io-error</b>: 낮은 수준의 장치가 상위 계층에 io-error를 보고할 " -"경우 해야 할 일</p>\n" +"\t\t<p><b>on-io-error</b>: 낮은 수준의 장치가 상위 계층에 io-error를 보고할 경우 해야 할 일</p>\n" "\t\t<p><b>sndbuf-size</b>: TCP 소켓 전송 버퍼의 크기</p>\n" "\t\t<p><b>max-buffers</b>: DRBD에서 할당할 최대 요청 수</p>\n" "\n" -"\t\t<p><b>timeout</b>: 파트너 노드는 1/10초 내에 예상 응답 패킷을 전송하지 못" -"하면 비가동 상태로 간주되므로 TCP/IP 연결도 취소됩니다. 이 값은 connect-int " -"및 ping-int보다 낮아야 합니다. 기본값은 60(6초)이고 단위는 0.1초입니다.</p>\n" -"\t\t<p><b>connect-int</b>: 피어가 keep-alive 패킷에 응답할 수 있는 시간. 이 " -"시간 내에 피어의 응답을 수신하지 못하면 비가동 상태로 간주됩니다. 기본값은 " -"500ms이고 기본 단위는 100ms입니다.</p>\n" +"\t\t<p><b>timeout</b>: 파트너 노드는 1/10초 내에 예상 응답 패킷을 전송하지 못하면 비가동 상태로 간주되므로 TCP/IP 연결도 취소됩니다. 이 값은 connect-int 및 ping-int보다 낮아야 합니다. 기본값은 60(6초)이고 단위는 0.1초입니다.</p>\n" +"\t\t<p><b>connect-int</b>: 피어가 keep-alive 패킷에 응답할 수 있는 시간. 이 시간 내에 피어의 응답을 수신하지 못하면 비가동 상태로 간주됩니다. 기본값은 500ms이고 기본 단위는 100ms입니다.</p>\n" "\t\t<p><b>ping-int</b>: 피어가 keep-alive 패킷에 응답할 수 있는 시간</p>\n" "\n" "\t\t<p><b>max-epoch-size</b>: 두 개의 쓰기 장벽 간 최고 데이터 블록 수</p>\n" -"\t\t<p><b>ko-count</b>: 보조 노드는 시간 제한 동안 단일 쓰기 요청을 완료하지 " -"못하면 클러스터에서 제외됩니다. 기본값은 0입니다(이 기능을 사용하지 않음).\n" -"\t\t<p><b>rate</b>: DRBD에서 응용 프로그램의 원활한 작동을 보장하려면 백그라" -"운드 동기화에 사용될 수 있는 대역폭을 제한할 수 있습니다. 기본값은 250KB/초이" -"고 기본 단위는 KB/초입니다.</p>\n" -"\t\t<p><b>al-extents</b>: 핫 영역(= active set)의 최대 크기를 제어하는 파라미" -"터. 기본 확장 수는 127입니다(최소: 7, 최대: 3843).</p>\n" +"\t\t<p><b>ko-count</b>: 보조 노드는 시간 제한 동안 단일 쓰기 요청을 완료하지 못하면 클러스터에서 제외됩니다. 기본값은 0입니다(이 기능을 사용하지 않음).</p>\n" +"\t\t<p><b>rate</b>: DRBD에서 응용 프로그램의 원활한 작동을 보장하려면 백그라운드 동기화에 사용될 수 있는 대역폭을 제한할 수 있습니다. 기본값은 250KB/초이고 기본 단위는 KB/초입니다.</p>\n" +"\t\t<p><b>al-extents</b>: 핫 영역(= active set)의 최대 크기를 제어하는 파라미터. 기본 확장 수는 127입니다(최소: 7, 최대: 3843).</p>\n" "\t\t" -#: src/include/drbd/helps.rb:113 +#: src/include/drbd/helps.rb:113 msgid "<p><b><big>LVM Configuration</big></b></p>" msgstr "<p><b><big>LVM 구성</big></b></p>" -#: src/include/drbd/helps.rb:116 +#: src/include/drbd/helps.rb:116 msgid "" "\n" "\t\t<p><b>LVM configuration file /etc/lvm/lvm.conf</b></p>\n" -"\t\t<p>To use LVM with DRBD, it is necessary to change some options in the " -"LVM configuration file and to remove stale cache entries on the nodes.</p>\t" -"\t<p>Refer to 'man lvm.conf' for further information including the file " -"layout.</p>\n" +"\t\t<p>To use LVM with DRBD, it is necessary to change some options in the LVM configuration file and to remove stale cache entries on the nodes.</p>\t\t<p>Refer to 'man lvm.conf' for further information including the file layout.</p>\n" "\t\t\t\t\t\t\t\t\t\t \n" -"\t\t<p><b>Device Filter</b>: This masks the underlying block device from the " -"list of devices LVM scans for Physical Volume signatures. This way, LVM is " -"instructed to read Physical Volume signatures from DRBD devices, rather than " -"from the underlying backing block devices.</p>\t\t<p><b>LVM Filter</b>: A " -"filter that tells LVM2 to only use a restricted set of devices.</p>\n" -"\t\t<p>The filter consists of an array of regular expressions. These " -"expressions can be delimited by a character of your choice, and prefixed " -"with either an 'a' (for accept) or 'r' (for reject).</p>\t\t<p>For example, " -"setting filter as [\"r|/dev/sda.*|\"]</p>\n" +"\t\t<p><b>Device Filter</b>: This masks the underlying block device from the list of devices LVM scans for Physical Volume signatures. This way, LVM is instructed to read Physical Volume signatures from DRBD devices, rather than from the underlying backing block devices.</p>\t\t<p><b>LVM Filter</b>: A filter that tells LVM2 to only use a restricted set of devices.</p>\n" +"\t\t<p>The filter consists of an array of regular expressions. These expressions can be delimited by a character of your choice, and prefixed with either an 'a' (for accept) or 'r' (for reject).</p>\t\t<p>For example, setting filter as [\"r|/dev/sda.*|\"]</p>\n" "\n" -"\t\t<p><b>LVM cache</b>: Enable/turn on writing the LVM cache is default. " -"Should disable the LVM cache when combined drbd with LVM.</p>\n" +"\t\t<p><b>LVM cache</b>: Enable/turn on writing the LVM cache is default. Should disable the LVM cache when combined drbd with LVM.</p>\n" "\n" -"\t\t<p><b>LVMetad</b>: When lvmetad is enabled, the volume group metadata " -"and PV state flags are obtained from the lvmetad instance and no scanning is " -"done by the individual commands. Because lvmetad's cache cannot be " -"synchronized between nodes, users are advised to disable lvmetad in cluster " -"environments.</p>\n" +"\t\t<p><b>LVMetad</b>: When lvmetad is enabled, the volume group metadata and PV state flags are obtained from the lvmetad instance and no scanning is done by the individual commands. Because lvmetad's cache cannot be synchronized between nodes, users are advised to disable lvmetad in cluster environments.</p>\n" "\n" "\t\t" msgstr "" "\n" "\t\t<p><b>LVM 구성 파일 /etc/lvm/lvm.conf</b></p>\n" -"\t\t<p>LVM을 DRBD와 함께 사용하려면 LVM 구성 파일에서 일부 옵션을 변경하고 노" -"드의 오래된 캐시 항목을 삭제해야 합니다.</p>\t\t<p>파일 레이아웃을 포함한 자" -"세한 정보는 'man lvm.conf'를 참조하십시오.</p>\n" +"\t\t<p>LVM을 DRBD와 함께 사용하려면 LVM 구성 파일에서 일부 옵션을 변경하고 노드의 오래된 캐시 항목을 삭제해야 합니다.</p>\t\t<p>파일 레이아웃을 포함한 자세한 정보는 'man lvm.conf'를 참조하십시오.</p>\n" "\t\t\t\t\t\t\t\t\t\t \n" -"\t\t<p><b>장치 필터</b>: 물리적 볼륨 서명을 위해 LVM이 스캔하는 장치 목록에" -"서 기본 블록 장치를 가립니다. 그러면 LVM이 기본 보조 블록 장치가 아닌 DRBD 장" -"치에서 물리적 볼륨 서명을 읽게 됩니다.</p>\t\t<p><b>LVM 필터</b>: LVM2이 제한" -"된 장치 세트만 사용하도록 지시하는 필터입니다.</p>\n" -"\t\t<p>이 필터는 정규식 배열로 구성되어 있습니다. 이러한 정규식은 원하는 문자" -"로 구분할 수 있고 'a'(accept) 또는 'r'(reject) 접두사가 붙습니다.</p>\t\t<p>" -"예를 들어 필터를 [\"r|/dev/sda*|\"]로 설정할 수 있습니다.</p>\n" +"\t\t<p><b>장치 필터</b>: 물리적 볼륨 서명을 위해 LVM이 스캔하는 장치 목록에서 기본 블록 장치를 가립니다. 그러면 LVM이 기본 보조 블록 장치가 아닌 DRBD 장치에서 물리적 볼륨 서명을 읽게 됩니다.</p>\t\t<p><b>LVM 필터</b>: LVM2이 제한된 장치 세트만 사용하도록 지시하는 필터입니다.</p>\n" +"\t\t<p>이 필터는 정규식 배열로 구성되어 있습니다. 이러한 정규식은 원하는 문자로 구분할 수 있고 'a'(accept) 또는 'r'(reject) 접두사가 붙습니다.</p>\t\t<p>예를 들어 필터를 [\"r|/dev/sda*|\"]로 설정할 수 있습니다.</p>\n" "\n" -"\t\t<p><b>LVM 캐시</b>: 기본적으로 LVM 쓰기가 활성화되어 있습니다. DRBD를 LVM" -"과 결합할 경우 LVM 캐시를 비활성화해야 합니다.</p>\n" +"\t\t<p><b>LVM 캐시</b>: 기본적으로 LVM 쓰기가 활성화되어 있습니다. DRBD를 LVM과 결합할 경우 LVM 캐시를 비활성화해야 합니다.</p>\n" "\n" -"\t\t<p><b>LVMetad</b>: lvmetad가 활성화된 경우 볼륨 그룹 메타데이터와 PV 상" -"태 플래그는 lvmetad 인스턴스에서 가져오고 개별 명령으로 스캔이 수행되지 않습" -"니다. lvmetad의 캐시는 노드 간에 동기화할 수 없으므로 클러스터 환경에서는 " -"lvmetad를 비활성화하는 것이 좋습니다.</p>\n" +"\t\t<p><b>LVMetad</b>: lvmetad가 활성화된 경우 볼륨 그룹 메타데이터와 PV 상태 플래그는 lvmetad 인스턴스에서 가져오고 개별 명령으로 스캔이 수행되지 않습니다. lvmetad의 캐시는 노드 간에 동기화할 수 없으므로 클러스터 환경에서는 lvmetad를 비활성화하는 것이 좋습니다.</p>\n" "\n" "\t\t" -#: src/include/drbd/helps.rb:133 +#: src/include/drbd/helps.rb:133 msgid "<p><b><big>Global Configuration of DRBD</big></b></p>" msgstr "<p><b><big>DRBD의 전체 구성</big></b></p>" -#: src/include/drbd/helps.rb:136 -msgid "" -"<p>Check <b>\"Disable IP Verification\"</b> to disable one of drbdadm's " -"sanity check</p>" -msgstr "" -"<p>drbdadm의 온전성 검사 중 하나를 비활성화하려면 <b>\"IP 확인 비활성화\"</b>" -"를 선택합니다.</p>" +#: src/include/drbd/helps.rb:136 +msgid "<p>Check <b>\"Disable IP Verification\"</b> to disable one of drbdadm's sanity check</p>" +msgstr "<p>drbdadm의 온전성 검사 중 하나를 비활성화하려면 <b>\"IP 확인 비활성화\"</b>를 선택합니다.</p>" -#: src/include/drbd/helps.rb:139 +#: src/include/drbd/helps.rb:139 msgid "" -"<p><b>Dialog Refresh:</b> The user dialog counts and displays the seconds it " -"waited so\n" +"<p><b>Dialog Refresh:</b> The user dialog counts and displays the seconds it waited so\n" " far. You might want to disable this if you have the console\n" " of your server connected to a serial terminal server with\n" " limited logging capacity.\n" -" The Dialog will print the count each 'dialog-refresh' " -"seconds,\n" +" The Dialog will print the count each 'dialog-refresh' seconds,\n" " set it to 0 to disable redrawing completely. </p>" msgstr "" -"<p><b>대화 상자 새로 고침:</b> 사용자 대화 상자는 지금까지 대기한 시간(초)을 " -"카운트하고 표시합니다.\n" +"<p><b>대화 상자 새로 고침:</b> 사용자 대화 상자는 지금까지 대기한 시간(초)을 카운트하고 표시합니다.\n" " 사용자가 기록 용량이 제한된 상태에서 서버 콘솔이 직렬\n" "터미널 서버에 연결된 경우 대화 상자를 비활성화할\n" " 수도 있습니다.\n" " 대화 상자는 각 'dialog-refresh' 시간(초)을 출력하고, \n" " 0으로 설정하여 다시 작성 작업을 비활성화합니다.</p>" -#: src/include/drbd/helps.rb:147 +#: src/include/drbd/helps.rb:147 msgid "" "<p><b>Minor Count:</b>\n" " use this if you want to define more resources later\n" @@ -472,12 +372,11 @@ "<p><b>마이너 카운트:</b>\n" " 모듈을 다시 로드하지 않고 더 많은 리소스를 정의하려는\n" " 경우에 사용합니다.\n" -" 기본적으로 이 파일에 구성된 장치 수와 같은 개수의 모듈을 로드합니" -"다.\n" +" 기본적으로 이 파일에 구성된 장치 수와 같은 개수의 모듈을 로드합니다.\n" " </p>" -#. Summary dialog help 1/3 -#: src/include/drbd/helps.rb:155 +#. Summary dialog help 1/3 +#: src/include/drbd/helps.rb:155 msgid "" "<p><b><big>DRBD Configuration</big></b><br>\n" "Configure drbd here.<br></p>\n" @@ -485,8 +384,8 @@ "<p><b><big>DRBD 구성</big></b><br>\n" "여기에 DRBD를 구성합니다.<br></p>\n" -#. Summary dialog help 2/3 -#: src/include/drbd/helps.rb:159 +#. Summary dialog help 2/3 +#: src/include/drbd/helps.rb:159 msgid "" "<p><b><big>Adding a drbd:</big></b><br>\n" "Choose an drbd from the list of detected drbds.\n" @@ -498,8 +397,8 @@ "DRBD가 감지되지 않으면 <b>기타(감지된 것 없음)</b>를 사용합니다.\n" "그런 다음 <b>구성</b>을 누릅니다.</p>\n" -#. Summary dialog help 3/3 -#: src/include/drbd/helps.rb:166 +#. Summary dialog help 3/3 +#: src/include/drbd/helps.rb:166 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -509,8 +408,8 @@ "<b>편집</b>을 누르면 구성을 변경하기 위한 대화 상자가\n" "추가로 열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/drbd/helps.rb:172 +#. Ovreview dialog help 1/3 +#: src/include/drbd/helps.rb:172 msgid "" "<p><b><big>DRBD Configuration Overview</big></b><br>\n" "Obtain an overview of installed drbds. Additionally\n" @@ -520,8 +419,8 @@ "설치된 DRBD 개요를 표시합니다. 여기서 구성도\n" "편집할 수 있습니다.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/drbd/helps.rb:178 +#. Ovreview dialog help 2/3 +#: src/include/drbd/helps.rb:178 msgid "" "<p><b><big>Adding a drbd:</big></b><br>\n" "Press <b>Add</b> to configure a drbd.</p>" @@ -529,8 +428,8 @@ "<p><b><big>DRBD 추가:</big></b><br>\n" "<b>추가</b>를 눌러 DRBD를 구성합니다.</p>" -#. Ovreview dialog help 3/3 -#: src/include/drbd/helps.rb:182 +#. Ovreview dialog help 3/3 +#: src/include/drbd/helps.rb:182 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "Choose a drbd to change or remove.\n" @@ -540,8 +439,8 @@ "변경 또는 제거할 DRBD를 선택한 다음\n" "<b>편집</b> 또는 <b>삭제</b>를 누릅니다.</p>\n" -#. Configure1 dialog help 1/2 -#: src/include/drbd/helps.rb:188 +#. Configure1 dialog help 1/2 +#: src/include/drbd/helps.rb:188 msgid "" "<p><b><big>Configuration Part One</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -551,9 +450,9 @@ "<b>다음</b>을 눌러 계속합니다.\n" "<br></p>" -#. Configure1 dialog help 2/2 -#. Configure2 dialog help 2/2 -#: src/include/drbd/helps.rb:194 src/include/drbd/helps.rb:206 +#. Configure1 dialog help 2/2 +#. Configure2 dialog help 2/2 +#: src/include/drbd/helps.rb:194 src/include/drbd/helps.rb:206 msgid "" "<p><b><big>Selecting Something</big></b><br>\n" "It is not possible. You must code it first. :-)\n" @@ -563,8 +462,8 @@ "이 옵션은 선택할 수 없습니다. 먼저 코딩을 해야 합니다.\n" " </p>" -#. Configure2 dialog help 1/2 -#: src/include/drbd/helps.rb:200 +#. Configure2 dialog help 1/2 +#: src/include/drbd/helps.rb:200 msgid "" "<p><b><big>Configuration Part Two</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -574,164 +473,162 @@ "<b>다음</b>을 눌러 계속합니다.\n" "<br></p>\n" -#. encoding: utf-8 -#: src/include/drbd/lvm_conf.rb:42 +#. encoding: utf-8 +#: src/include/drbd/lvm_conf.rb:42 msgid "LVM Filter Configuration of DRBD" msgstr "DRBD의 LVM 필터 구성" -#: src/include/drbd/lvm_conf.rb:50 +#: src/include/drbd/lvm_conf.rb:50 msgid "Device Filter" msgstr "장치 필터" -#: src/include/drbd/lvm_conf.rb:60 +#: src/include/drbd/lvm_conf.rb:60 msgid "Writing the LVM cache" msgstr "LVM 캐시 쓰기" -#: src/include/drbd/lvm_conf.rb:69 +#: src/include/drbd/lvm_conf.rb:69 msgid "Enable LVM Cache" msgstr "LVM 캐시 활성화" -#: src/include/drbd/lvm_conf.rb:74 +#: src/include/drbd/lvm_conf.rb:74 msgid "Warning! Should disable LVM cache for using drbd." msgstr "경고! drbd를 사용하려면 LVM 캐시를 비활성화해야 합니다." -#: src/include/drbd/lvm_conf.rb:85 +#: src/include/drbd/lvm_conf.rb:85 msgid "Use lvmetad for LVM" msgstr "LVM에 lvmetad 사용" -#: src/include/drbd/lvm_conf.rb:94 +#: src/include/drbd/lvm_conf.rb:94 msgid "Use LVM metad" msgstr "LVM metad 사용" -#: src/include/drbd/lvm_conf.rb:99 +#: src/include/drbd/lvm_conf.rb:99 msgid "Warning! Should not use lvmetad for cluster." msgstr "경고! 클러스터에 lvmetad를 사용하지 않아야 합니다." -#. encoding: utf-8 -#: src/include/drbd/resource_conf.rb:144 +#. encoding: utf-8 +#: src/include/drbd/resource_conf.rb:144 msgid "Resource Name" msgstr "리소스 이름" -#: src/include/drbd/resource_conf.rb:151 +#: src/include/drbd/resource_conf.rb:151 msgid "Nodes" msgstr "노드" -#: src/include/drbd/resource_conf.rb:154 +#: src/include/drbd/resource_conf.rb:154 msgid "Add" msgstr "추가" -#: src/include/drbd/resource_conf.rb:155 +#: src/include/drbd/resource_conf.rb:155 msgid "Edit" msgstr "편집" -#: src/include/drbd/resource_conf.rb:156 +#: src/include/drbd/resource_conf.rb:156 msgid "Delete" msgstr "삭제" -#: src/include/drbd/resource_conf.rb:188 +#: src/include/drbd/resource_conf.rb:188 msgid "Save" msgstr "저장" -#. Since n_name can't be edit, so set direct is OK -#: src/include/drbd/resource_conf.rb:331 +#. Since n_name can't be edit, so set direct is OK +#: src/include/drbd/resource_conf.rb:331 msgid "Protocol" msgstr "프로토콜" -#. return `cancel or a string -#: src/include/drbd/resource_conf.rb:555 +#. return `cancel or a string +#: src/include/drbd/resource_conf.rb:555 msgid "OK" msgstr "확인" -#: src/include/drbd/resource_conf.rb:556 +#: src/include/drbd/resource_conf.rb:556 msgid "Cancel" msgstr "취소" -#: src/include/drbd/resource_conf.rb:570 +#: src/include/drbd/resource_conf.rb:570 msgid "Node name can not be empty." msgstr "노드의 이름은 비워 둘 수 없습니다." -#. eg. ipv6 [fd01:2345:6789:abcd::1]:7800 -#: src/include/drbd/resource_conf.rb:618 +#. eg. ipv6 [fd01:2345:6789:abcd::1]:7800 +#: src/include/drbd/resource_conf.rb:618 msgid "IPv6 address must be placed inside brackets." msgstr "IPv6 주소는 대괄호 안에 넣어야 합니다." -#. IPv6 should including port -#: src/include/drbd/resource_conf.rb:626 -#: src/include/drbd/resource_conf.rb:631 +#. IPv6 should including port +#: src/include/drbd/resource_conf.rb:626 src/include/drbd/resource_conf.rb:631 msgid "IP/port should use 'addr:port' combination." msgstr "IP/포트는 'addr:port' 조합을 사용해야 합니다." -#: src/include/drbd/resource_conf.rb:639 +#: src/include/drbd/resource_conf.rb:639 msgid "Please enter a valid IP address." msgstr "유효한 IP 주소를 입력하십시오." -#. Checking the port is number -#: src/include/drbd/resource_conf.rb:646 +#. Checking the port is number +#: src/include/drbd/resource_conf.rb:646 msgid "Please enter a valid port number." msgstr "유효한 포트 번호를 입력하십시오." -#. myHelp("basic_conf"); -#: src/include/drbd/resource_conf.rb:714 +#. myHelp("basic_conf"); +#: src/include/drbd/resource_conf.rb:714 msgid "Node names must not include \".\" , using the local hostname." -msgstr "" -"로컬 호스트 이름을 사용하는 노드 이름에 \".\"가 포함되지 않아야 합니다." +msgstr "로컬 호스트 이름을 사용하는 노드 이름에 \".\"가 포함되지 않아야 합니다." -#: src/include/drbd/resource_conf.rb:734 +#: src/include/drbd/resource_conf.rb:734 msgid "Please fill out all fields." msgstr "모든 필드를 입력하십시오." -#: src/include/drbd/resource_conf.rb:749 +#: src/include/drbd/resource_conf.rb:749 msgid "Please configure at least two nodes." msgstr "노드를 두 개 이상 구성하십시오." -#. No need to check integrity since it will disabled when configuring -#: src/include/drbd/resource_conf.rb:784 +#. No need to check integrity since it will disabled when configuring +#: src/include/drbd/resource_conf.rb:784 msgid "Enter the node name:" msgstr "모듈 이름 입력:" -#: src/include/drbd/resource_conf.rb:790 +#: src/include/drbd/resource_conf.rb:790 msgid "Node name must be different." msgstr "노드 이름은 서로 달라야 합니다." -#. encoding: utf-8 -#. Package: Configuration of heartbeat -#. Authors: Martin Lazar -#. -#. $Id: startup_conf.ycp 30707 2006-05-04 13:19:08Z lslezak $ -#: src/include/drbd/startup_conf.rb:29 +#. encoding: utf-8 +#. Package: Configuration of heartbeat +#. Authors: Martin Lazar +#. +#. $Id: startup_conf.ycp 30707 2006-05-04 13:19:08Z lslezak $ +#: src/include/drbd/startup_conf.rb:29 msgid "Booting" msgstr "부팅 중" -#: src/include/drbd/startup_conf.rb:37 +#: src/include/drbd/startup_conf.rb:37 msgid "On -- Start DRBD Server when Booting" msgstr "켜기 -- 부팅 시 DRBD 서버 시작" -#: src/include/drbd/startup_conf.rb:41 +#: src/include/drbd/startup_conf.rb:41 msgid "Off -- Server Only Starts Manually" msgstr "해제 - 수동으로만 서버를 시작합니다." -#: src/include/drbd/startup_conf.rb:50 +#: src/include/drbd/startup_conf.rb:50 msgid "Switch On and Off" msgstr "설정/해제" -#: src/include/drbd/startup_conf.rb:55 +#: src/include/drbd/startup_conf.rb:55 msgid "Current Status: " msgstr "현재 상태: " -#: src/include/drbd/startup_conf.rb:62 +#: src/include/drbd/startup_conf.rb:62 msgid "Start DRBD Server Now" msgstr "DRBD 서버 지금 시작" -#: src/include/drbd/startup_conf.rb:67 +#: src/include/drbd/startup_conf.rb:67 msgid "Stop DRBD Server Now" msgstr "DRBD 서버 지금 중지" -#. firewall_layout is just a dialog -#: src/include/drbd/startup_conf.rb:89 +#. firewall_layout is just a dialog +#: src/include/drbd/startup_conf.rb:89 msgid "Propagate Configuration" msgstr "구성 적용" -#: src/include/drbd/startup_conf.rb:96 +#: src/include/drbd/startup_conf.rb:96 msgid "" "To propagate this configuration ,\n" "copy the configuration file '/etc/drbd.conf' to the rest of nodes manually." @@ -739,127 +636,127 @@ "이 구성을 적용하려면 \n" "구성 파일 '/etc/drbd.conf'를 나머지 노드에 수동으로 복사하십시오." -#. } -#: src/include/drbd/startup_conf.rb:141 +#. } +#: src/include/drbd/startup_conf.rb:141 msgid "DRBD server is running." msgstr "DRBD 서버가 실행 중입니다." -#: src/include/drbd/startup_conf.rb:142 +#: src/include/drbd/startup_conf.rb:142 msgid "DRBD server is not running." msgstr "DRBD 서버가 실행되고 있지 않습니다." -#. Report::Error ( Service::Error()); -#: src/include/drbd/startup_conf.rb:166 +#. Report::Error ( Service::Error()); +#: src/include/drbd/startup_conf.rb:166 msgid "Start DRBD service failed" msgstr "DRBD 서비스 시작 실패" -#. Report::Error ( Service::Error() ); -#: src/include/drbd/startup_conf.rb:174 +#. Report::Error ( Service::Error() ); +#: src/include/drbd/startup_conf.rb:174 msgid "Stop DRBD service failed" msgstr "DRBD 서비스 중지 실패" -#. Initialization dialog caption -#: src/include/drbd/wizards.rb:139 +#. Initialization dialog caption +#: src/include/drbd/wizards.rb:139 msgid "Heartbeat Configuration" msgstr "하트비트 구성" -#. Initialization dialog contents -#: src/include/drbd/wizards.rb:141 +#. Initialization dialog contents +#: src/include/drbd/wizards.rb:141 msgid "Initializing..." msgstr "초기화 중..." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: modules/Drbd.ycp -#. Package: Configuration of drbd -#. Summary: Drbd settings, input and output functions -#. Authors: xwhu -#. -#. $Id: Drbd.ycp 27914 2006-02-13 14:32:08Z locilka $ -#. -#. Representation of the configuration of drbd. -#. Input and output routines. -#: src/modules/Drbd.rb:112 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: modules/Drbd.ycp +#. Package: Configuration of drbd +#. Summary: Drbd settings, input and output functions +#. Authors: xwhu +#. +#. $Id: Drbd.ycp 27914 2006-02-13 14:32:08Z locilka $ +#. +#. Representation of the configuration of drbd. +#. Input and output routines. +#: src/modules/Drbd.rb:112 msgid "Failed to merge separated DRBD conf files\n" msgstr "분리된 DRBD 구성 파일을 병합하지 못했습니다.\n" -#: src/modules/Drbd.rb:134 +#: src/modules/Drbd.rb:134 msgid "Failed to write drbd.conf.YaST2prepare" msgstr "drbd.conf.YaST2prepare를 쓰지 못했습니다." -#. DRBD read dialog caption -#: src/modules/Drbd.rb:189 +#. DRBD read dialog caption +#: src/modules/Drbd.rb:189 msgid "Initializing DRBD Configuration" msgstr "DRBD 구성 초기화 중" -#. We do not set help text here, because it was set outside -#: src/modules/Drbd.rb:197 +#. We do not set help text here, because it was set outside +#: src/modules/Drbd.rb:197 msgid "Read global settings" msgstr "전체 설정 읽기" -#: src/modules/Drbd.rb:198 +#: src/modules/Drbd.rb:198 msgid "Read resources" msgstr "리소스 읽기" -#: src/modules/Drbd.rb:199 +#: src/modules/Drbd.rb:199 msgid "Read LVM configurations" msgstr "LVM 구성 읽기" -#: src/modules/Drbd.rb:200 +#: src/modules/Drbd.rb:200 msgid "Read daemon status" msgstr "데몬 상태 읽기" -#: src/modules/Drbd.rb:201 src/modules/Drbd.rb:208 +#: src/modules/Drbd.rb:201 src/modules/Drbd.rb:208 msgid "Read SuSEFirewall Settings" msgstr "SuSEFirewall 설정 읽기" -#: src/modules/Drbd.rb:204 +#: src/modules/Drbd.rb:204 msgid "Reading global settings..." msgstr "전체 설정을 읽는 중..." -#: src/modules/Drbd.rb:205 +#: src/modules/Drbd.rb:205 msgid "Reading resources..." msgstr "리소스를 읽는 중..." -#: src/modules/Drbd.rb:206 +#: src/modules/Drbd.rb:206 msgid "Reading LVM configurations..." msgstr "LVM 구성 읽는 중..." -#: src/modules/Drbd.rb:207 +#: src/modules/Drbd.rb:207 msgid "Reading daemon status..." msgstr "데몬 상태를 읽는 중..." -#: src/modules/Drbd.rb:209 src/modules/Drbd.rb:664 +#: src/modules/Drbd.rb:209 src/modules/Drbd.rb:664 msgid "Finished" msgstr "완료됨" -#. new_map = remove(new_map, key); -#: src/modules/Drbd.rb:512 +#. new_map = remove(new_map, key); +#: src/modules/Drbd.rb:512 msgid "Failed to backup drbd.conf" msgstr "drbd.conf를 백업하지 못했습니다." -#: src/modules/Drbd.rb:521 +#: src/modules/Drbd.rb:521 msgid "Failed to clean drbd.conf for drbdadm test" msgstr "drbdadm 테스트를 위해 drbd.conf를 지우지 못했습니다." -#: src/modules/Drbd.rb:545 +#: src/modules/Drbd.rb:545 msgid "" "Invalid configuration of resource %1\n" "%2" @@ -867,59 +764,59 @@ "%1 리소스의 구성이 잘못됨\n" "%2" -#: src/modules/Drbd.rb:564 +#: src/modules/Drbd.rb:564 msgid "Failed to bring drbd.conf back" msgstr "drbd.conf를 다시 가져오지 못했습니다." -#. DRBD write dialog caption -#: src/modules/Drbd.rb:640 +#. DRBD write dialog caption +#: src/modules/Drbd.rb:640 msgid "Writing DRBD Configuration" msgstr "DRBD 구성을 쓰는 중" -#. Comment code below due to change the "booting" status -#. won't change modified flag -#. return true if !@modified -#. We do not set help text here, because it was set outside -#: src/modules/Drbd.rb:652 +#. Comment code below due to change the "booting" status +#. won't change modified flag +#. return true if !@modified +#. We do not set help text here, because it was set outside +#: src/modules/Drbd.rb:652 msgid "Write global settings" msgstr "전체 설정 쓰기" -#: src/modules/Drbd.rb:653 +#: src/modules/Drbd.rb:653 msgid "Write resources" msgstr "리소스 쓰기" -#: src/modules/Drbd.rb:654 +#: src/modules/Drbd.rb:654 msgid "Write LVM configurations" msgstr "LVM 구성 쓰기" -#: src/modules/Drbd.rb:655 +#: src/modules/Drbd.rb:655 msgid "Set daemon status" msgstr "데몬 상태 설정" -#: src/modules/Drbd.rb:656 +#: src/modules/Drbd.rb:656 msgid "Write the SuSEfirewall settings" msgstr "SuSEfirewall 설정 쓰기" -#: src/modules/Drbd.rb:659 +#: src/modules/Drbd.rb:659 msgid "Writing global settings..." msgstr "전체 설정을 쓰는 중..." -#: src/modules/Drbd.rb:660 +#: src/modules/Drbd.rb:660 msgid "Writing resources..." msgstr "리소스를 쓰는 중..." -#: src/modules/Drbd.rb:661 +#: src/modules/Drbd.rb:661 msgid "Writing LVM configurations..." msgstr "LVM 구성 쓰는 중..." -#: src/modules/Drbd.rb:662 +#: src/modules/Drbd.rb:662 msgid "Setting daemon status..." msgstr "데몬 상태 설정 중..." -#: src/modules/Drbd.rb:663 +#: src/modules/Drbd.rb:663 msgid "Writing the SuSEFirewall settings" msgstr "SuSEFirewall 설정 쓰기" -#: src/modules/Drbd.rb:674 +#: src/modules/Drbd.rb:674 msgid "Failed to make directory /etc/drbd.d" msgstr "/etc/drbd.d 디렉터리를 만들지 못했습니다." Modified: branches/SLE12-SP3/yast/ko/po/fcoe-client.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/fcoe-client.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/fcoe-client.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,38 +14,38 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xfcoe-client module -#: src/clients/fcoe-client.rb:54 +#. Command line help text for the Xfcoe-client module +#: src/clients/fcoe-client.rb:54 msgid "Configuration of fcoe-client" msgstr "FCoE 클라이언트 구성" -#. progress step title -#: src/clients/fcoe-client_finish.rb:67 +#. progress step title +#: src/clients/fcoe-client_finish.rb:67 msgid "Saving fcoe configuration..." msgstr "FCoE 구성 저장 중..." -#. Rich text title for FcoeClient in proposals -#: src/clients/fcoe-client_proposal.rb:82 +#. Rich text title for FcoeClient in proposals +#: src/clients/fcoe-client_proposal.rb:82 msgid "FcoeClient" msgstr "FCoE 클라이언트" -#. Menu title for FcoeClient in proposals -#: src/clients/fcoe-client_proposal.rb:86 +#. Menu title for FcoeClient in proposals +#: src/clients/fcoe-client_proposal.rb:86 msgid "&FcoeClient" msgstr "FCoE 클라이언트(&F)" -#. setting of config value is 'yes' -#: src/include/fcoe-client/complex.rb:48 +#. setting of config value is 'yes' +#: src/include/fcoe-client/complex.rb:48 msgid "yes" msgstr "예" -#. setting of config value is 'no' -#: src/include/fcoe-client/complex.rb:50 +#. setting of config value is 'no' +#: src/include/fcoe-client/complex.rb:50 msgid "no" msgstr "아니오" -#. text of an error popup -#: src/include/fcoe-client/complex.rb:102 +#. text of an error popup +#: src/include/fcoe-client/complex.rb:102 msgid "" "Cannot remove the FCoE interface.\n" "Command %1 failed." @@ -53,38 +53,38 @@ "FCoE 인터페이스를 제거할 수 없습니다.\n" "%1 명령이 실패했습니다." -#. FCoE is not available on the interface -#: src/include/fcoe-client/complex.rb:195 +#. FCoE is not available on the interface +#: src/include/fcoe-client/complex.rb:195 msgid "not available" msgstr "사용 불가능" -#. the interface is not configured for FCoE -#: src/include/fcoe-client/complex.rb:197 +#. the interface is not configured for FCoE +#: src/include/fcoe-client/complex.rb:197 msgid "not configured" msgstr "구성되지 않음" -#. the flag is 'true' -#: src/include/fcoe-client/complex.rb:203 +#. the flag is 'true' +#: src/include/fcoe-client/complex.rb:203 msgid "true" msgstr "true" -#. the flag is 'false' -#: src/include/fcoe-client/complex.rb:205 +#. the flag is 'false' +#: src/include/fcoe-client/complex.rb:205 msgid "false" msgstr "false" -#. the flag is not set at all -#: src/include/fcoe-client/complex.rb:207 +#. the flag is not set at all +#: src/include/fcoe-client/complex.rb:207 msgid "not set" msgstr "설정 안 함" -#. headline of the edit dialog - configuration of values for a certain network interface -#: src/include/fcoe-client/complex.rb:306 +#. headline of the edit dialog - configuration of values for a certain network interface +#: src/include/fcoe-client/complex.rb:306 msgid "Configuration of VLAN interface %1 on %2" msgstr "%2의 VLAN 인터페이스 %1 구성" -#. text of an error popup -#: src/include/fcoe-client/complex.rb:368 +#. text of an error popup +#: src/include/fcoe-client/complex.rb:368 msgid "" "Cannot start FCoE on VLAN interface %1\n" "because FCoE is already configured on\n" @@ -94,8 +94,8 @@ "이미 구성되어 있으므로 VLAN 인터페이스 %1에서\n" "FCoE를 시작할 수 없습니다." -#. text of an error popup -#: src/include/fcoe-client/complex.rb:383 +#. text of an error popup +#: src/include/fcoe-client/complex.rb:383 msgid "" "Cannot start FCoE on network interface %1 itself\n" "because FCoE is already configured on\n" @@ -105,13 +105,13 @@ "이미 구성되어 있으므로 네트워크 인터페이스 %1 자체에서\n" "FCoE를 시작할 수 없습니다." -#. headline of a popup: creating and starting Fibre Channel over Ethernet -#: src/include/fcoe-client/complex.rb:417 +#. headline of a popup: creating and starting Fibre Channel over Ethernet +#: src/include/fcoe-client/complex.rb:417 msgid "Creating and Starting FCoE on Detected VLAN Device" msgstr "검색된 VLAN 장치에서 FCoE 생성 및 시작" -#. question to the user: really create and start FCoE -#: src/include/fcoe-client/complex.rb:420 +#. question to the user: really create and start FCoE +#: src/include/fcoe-client/complex.rb:420 msgid "" "Do you really want to create a FCoE network\n" "interface for discovered VLAN interface %1\n" @@ -121,17 +121,17 @@ "FCoE 네트워크 인터페이스를 생성하고 FCoE\n" "이니시에이터를 시작하시겠습니까?" -#. text of an error popup -#: src/include/fcoe-client/complex.rb:443 +#. text of an error popup +#: src/include/fcoe-client/complex.rb:443 msgid "Cannot create and start FCoE on %1." msgstr "%1에서 FCoE를 생성 및 시작할 수 없습니다." -#. text of an error popup: command failed on the network interface -#: src/include/fcoe-client/complex.rb:480 +#. text of an error popup: command failed on the network interface +#: src/include/fcoe-client/complex.rb:480 msgid "Command \"%1\" on %2 failed." msgstr "%2에서 \"%1\" 명령 실패." -#: src/include/fcoe-client/complex.rb:488 +#: src/include/fcoe-client/complex.rb:488 msgid "" "Creating FCoE interface failed.\n" "Continue because running in test mode" @@ -139,13 +139,13 @@ "FCoE 인터페이스 생성에 실패했습니다.\n" "테스트 모드에서 실행 중이므로 계속합니다." -#. popup text: really remove FCoE VLAN interface -#: src/include/fcoe-client/complex.rb:583 +#. popup text: really remove FCoE VLAN interface +#: src/include/fcoe-client/complex.rb:583 msgid "Do you really want to remove the FCoE interface %1?" msgstr "FCoE 인터페이스 %1을(를) 제거하시겠습니까?" -#. popup text continues -#: src/include/fcoe-client/complex.rb:591 +#. popup text continues +#: src/include/fcoe-client/complex.rb:591 msgid "" "Attention:\n" "Make sure the interface is not essential for a used device.\n" @@ -155,8 +155,8 @@ "인터페이스가 사용된 장치에 필수가 아닌지 확인하십시오.\n" "인터페이스를 제거하면 시스템을 사용하지 못할 수도 있습니다." -#. popup text continues -#: src/include/fcoe-client/complex.rb:601 +#. popup text continues +#: src/include/fcoe-client/complex.rb:601 msgid "" "Don't remove the interface if it's related\n" "to an already activated multipath device." @@ -164,17 +164,17 @@ "이미 활성화된 다중 경로 장치와 관련이 있으므로\n" "인터페이스를 제거하지 마십시오." -#. replace values in table -#: src/include/fcoe-client/complex.rb:750 +#. replace values in table +#: src/include/fcoe-client/complex.rb:750 msgid "Removing of interface %1 failed." msgstr "%1 인터페이스 제거에 실패했습니다." -#: src/include/fcoe-client/complex.rb:762 +#: src/include/fcoe-client/complex.rb:762 msgid "Destroying interface %1 failed." msgstr "%1 인터페이스를 제거하지 못했습니다." -#. text of a warning popup -#: src/include/fcoe-client/complex.rb:794 +#. text of a warning popup +#: src/include/fcoe-client/complex.rb:794 msgid "" "DCB Required is set to \"yes\" but the\n" "interface isn't DCB capable." @@ -182,8 +182,8 @@ "DCB 필요가 \"예\"로 설정되었는데\n" "인터페이스가 DCB 호환이 아닙니다." -#. text of an information (notify) popup -#: src/include/fcoe-client/complex.rb:831 +#. text of an information (notify) popup +#: src/include/fcoe-client/complex.rb:831 msgid "" "Service 'fcoe' requires enabled service 'lldpad'.\n" "Enabling start on boot of service 'lldpad'." @@ -191,148 +191,146 @@ "'fcoe' 서비스에는 활성화된 서비스 'lldpad'가 필요합니다.\n" "'lldpad' 서비스의 부팅 시 시작을 활성화합니다." -#. radio button: start service on boot -#. radio button: start service on boot -#: src/include/fcoe-client/dialogs.rb:48 -#: src/include/fcoe-client/dialogs.rb:69 +#. radio button: start service on boot +#. radio button: start service on boot +#: src/include/fcoe-client/dialogs.rb:48 src/include/fcoe-client/dialogs.rb:69 msgid "When Booting" msgstr "부팅 시" -#. radio button: start service manually -#. radio button: start service manually -#: src/include/fcoe-client/dialogs.rb:56 -#: src/include/fcoe-client/dialogs.rb:77 +#. radio button: start service manually +#. radio button: start service manually +#: src/include/fcoe-client/dialogs.rb:56 src/include/fcoe-client/dialogs.rb:77 msgid "Manually" msgstr "수동으로" -#. combo box label: enable FCoE (yes/no) -#: src/include/fcoe-client/dialogs.rb:109 +#. combo box label: enable FCoE (yes/no) +#: src/include/fcoe-client/dialogs.rb:109 msgid "&FCoE Enable" msgstr "FCoE 활성화(&F)" -#: src/include/fcoe-client/dialogs.rb:110 -#: src/include/fcoe-client/dialogs.rb:118 -#: src/include/fcoe-client/dialogs.rb:125 -#: src/include/fcoe-client/dialogs.rb:230 -#: src/include/fcoe-client/dialogs.rb:241 +#: src/include/fcoe-client/dialogs.rb:110 +#: src/include/fcoe-client/dialogs.rb:118 +#: src/include/fcoe-client/dialogs.rb:125 +#: src/include/fcoe-client/dialogs.rb:230 +#: src/include/fcoe-client/dialogs.rb:241 msgid "Yes" msgstr "예" -#: src/include/fcoe-client/dialogs.rb:110 -#: src/include/fcoe-client/dialogs.rb:118 -#: src/include/fcoe-client/dialogs.rb:125 -#: src/include/fcoe-client/dialogs.rb:230 -#: src/include/fcoe-client/dialogs.rb:241 +#: src/include/fcoe-client/dialogs.rb:110 +#: src/include/fcoe-client/dialogs.rb:118 +#: src/include/fcoe-client/dialogs.rb:125 +#: src/include/fcoe-client/dialogs.rb:230 +#: src/include/fcoe-client/dialogs.rb:241 msgid "No" msgstr "아니오" -#. combo box label: require DCB (yes/no) -#: src/include/fcoe-client/dialogs.rb:117 +#. combo box label: require DCB (yes/no) +#: src/include/fcoe-client/dialogs.rb:117 msgid "&DCB Required" msgstr "DCB 필수(&D)" -#. combo box label: AUTO_VLAN setting (yes/no) -#: src/include/fcoe-client/dialogs.rb:124 +#. combo box label: AUTO_VLAN setting (yes/no) +#: src/include/fcoe-client/dialogs.rb:124 msgid "&AUTO_VLAN" msgstr "AUTO_VLAN(&A)" -#. frame containing radio buttons for fcoe service start -#: src/include/fcoe-client/dialogs.rb:150 +#. frame containing radio buttons for fcoe service start +#: src/include/fcoe-client/dialogs.rb:150 msgid "FCoE Service Start" msgstr "FCoE 서비스 시작" -#. frame containing radio buttons for lldpad service start -#: src/include/fcoe-client/dialogs.rb:155 +#. frame containing radio buttons for lldpad service start +#: src/include/fcoe-client/dialogs.rb:155 msgid "Lldpad Service Start" msgstr "Lldpad 서비스 시작" -#. column headers of table of network interfaces (keep them short) -#: src/include/fcoe-client/dialogs.rb:179 +#. column headers of table of network interfaces (keep them short) +#: src/include/fcoe-client/dialogs.rb:179 msgid "Device" msgstr "장치" -#: src/include/fcoe-client/dialogs.rb:180 +#: src/include/fcoe-client/dialogs.rb:180 msgid "MAC Address" msgstr "MAC 주소" -#: src/include/fcoe-client/dialogs.rb:181 +#: src/include/fcoe-client/dialogs.rb:181 msgid "Model" msgstr "모델" -#: src/include/fcoe-client/dialogs.rb:182 +#: src/include/fcoe-client/dialogs.rb:182 msgid "VLAN" msgstr "VLAN" -#: src/include/fcoe-client/dialogs.rb:183 +#: src/include/fcoe-client/dialogs.rb:183 msgid "FCoE VLAN Interface" msgstr "FCoE VLAN 인터페이스" -#: src/include/fcoe-client/dialogs.rb:184 +#: src/include/fcoe-client/dialogs.rb:184 msgid "FCoE Enable" msgstr "FCoE 활성화" -#: src/include/fcoe-client/dialogs.rb:185 +#: src/include/fcoe-client/dialogs.rb:185 msgid "DCB Required" msgstr "DCB 필수" -#: src/include/fcoe-client/dialogs.rb:186 +#: src/include/fcoe-client/dialogs.rb:186 msgid "AUTO VLAN" msgstr "자동 VLAN" -#: src/include/fcoe-client/dialogs.rb:187 +#: src/include/fcoe-client/dialogs.rb:187 msgid "DCB capable" msgstr "DCB 기능" -#: src/include/fcoe-client/dialogs.rb:188 +#: src/include/fcoe-client/dialogs.rb:188 msgid "Driver" msgstr "드라이버" -#: src/include/fcoe-client/dialogs.rb:189 +#: src/include/fcoe-client/dialogs.rb:189 msgid "Flag FCoE" msgstr "플래그 FCoE" -#: src/include/fcoe-client/dialogs.rb:190 +#: src/include/fcoe-client/dialogs.rb:190 msgid "Flag iSCSI" msgstr "플래그 iSCSI" -#: src/include/fcoe-client/dialogs.rb:191 +#: src/include/fcoe-client/dialogs.rb:191 msgid "Storage Only" msgstr "저장소만" -#. button labels -#: src/include/fcoe-client/dialogs.rb:198 +#. button labels +#: src/include/fcoe-client/dialogs.rb:198 msgid "Retry &Detection" msgstr "검색 재시도(&D)" -#: src/include/fcoe-client/dialogs.rb:199 +#: src/include/fcoe-client/dialogs.rb:199 msgid "Change &Settings" msgstr "설정 변경(&H)" -#: src/include/fcoe-client/dialogs.rb:200 +#: src/include/fcoe-client/dialogs.rb:200 msgid "Create &FCoE Interface" msgstr "FCoE 인터페이스 생성(&F)" -#: src/include/fcoe-client/dialogs.rb:201 +#: src/include/fcoe-client/dialogs.rb:201 msgid "&Remove Interface" msgstr "인터페이스 제거(&R)" -#. frame label - configuration settings of FCoE -#: src/include/fcoe-client/dialogs.rb:222 +#. frame label - configuration settings of FCoE +#: src/include/fcoe-client/dialogs.rb:222 msgid "Configuration Settings" msgstr "구성 설정" -#. combo box label (debug setting yes/no) -#: src/include/fcoe-client/dialogs.rb:229 +#. combo box label (debug setting yes/no) +#: src/include/fcoe-client/dialogs.rb:229 msgid "&Debug" msgstr "디버그(&D)" -#. combo box label (use syslog yes/no) -#: src/include/fcoe-client/dialogs.rb:240 +#. combo box label (use syslog yes/no) +#: src/include/fcoe-client/dialogs.rb:240 msgid "&Use syslog" msgstr "syslog 사용(&U)" -#. Read dialog help 1/2 -#: src/include/fcoe-client/helps.rb:35 +#. Read dialog help 1/2 +#: src/include/fcoe-client/helps.rb:35 msgid "" "<p><b><big>Initializing fcoe-client Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -340,8 +338,8 @@ "<p><b><big>FCoE 클라이언트 구성 초기화</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/fcoe-client/helps.rb:39 +#. Read dialog help 2/2 +#: src/include/fcoe-client/helps.rb:39 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -349,8 +347,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/fcoe-client/helps.rb:43 +#. Write dialog help 1/2 +#: src/include/fcoe-client/helps.rb:43 msgid "" "<p><b><big>Saving fcoe-client Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -358,8 +356,8 @@ "<p><b><big>FCoE 클라이언트 구성 저장</big></b><br>\n" "잠시 기다려 주십시오.<br></p>\n" -#. Write dialog help 2/2 -#: src/include/fcoe-client/helps.rb:47 +#. Write dialog help 2/2 +#: src/include/fcoe-client/helps.rb:47 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -371,8 +369,8 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Summary dialog help 1/3 -#: src/include/fcoe-client/helps.rb:54 +#. Summary dialog help 1/3 +#: src/include/fcoe-client/helps.rb:54 msgid "" "<p><b><big>FcoeClient Configuration</big></b><br>\n" "Configure fcoe-client here.<br></p>\n" @@ -380,8 +378,8 @@ "<p><b><big>FCoE 클라이언트 구성</big></b><br>\n" "여기서 FCoE 클라이언트를 구성합니다.</br></p>\n" -#. Summary dialog help 2/3 -#: src/include/fcoe-client/helps.rb:58 +#. Summary dialog help 2/3 +#: src/include/fcoe-client/helps.rb:58 msgid "" "<p><b><big>Adding a fcoe-client:</big></b><br>\n" "Choose a fcoe-client from the list of detected fcoe-clients.\n" @@ -390,12 +388,11 @@ msgstr "" "<p><b><big>fcoe 클라이언트 추가:</big></b><br>\n" "검색된 FCOE 클라이언트 목록에서 fcoe 클라이언트를 선택합니다.\n" -"fcoe 클라이언트가 검색되지 않은 경우 <b>기타(검색되지 않음)</b>를 사용하십시" -"오.\n" +"fcoe 클라이언트가 검색되지 않은 경우 <b>기타(검색되지 않음)</b>를 사용하십시오.\n" "그런 다음 <b>구성</b>을 누르십시오.</p>\n" -#. Summary dialog help 3/3 -#: src/include/fcoe-client/helps.rb:65 +#. Summary dialog help 3/3 +#: src/include/fcoe-client/helps.rb:65 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -405,230 +402,157 @@ "<b>편집</b>을 누르면 구성을 변경하기 위한 추가 대화 상자가\n" "열립니다.</p>\n" -#. Services dialog help 1/3 -#: src/include/fcoe-client/helps.rb:71 -msgid "" -"<p><b><big>Starting of services</big><br></b><br>Enable or disable the start " -"of the services <b>fcoe</b> and <b>lldpad</b> at boot time.</p>" -msgstr "" -"<p><b><big>서비스 시작</big><br></b><br>부팅 시 <b>fcoe</b> 및 <b>lldpad</b> " -"서비스 시작을 활성화하거나 비활성화합니다.</p>" +#. Services dialog help 1/3 +#: src/include/fcoe-client/helps.rb:71 +msgid "<p><b><big>Starting of services</big><br></b><br>Enable or disable the start of the services <b>fcoe</b> and <b>lldpad</b> at boot time.</p>" +msgstr "<p><b><big>서비스 시작</big><br></b><br>부팅 시 <b>fcoe</b> 및 <b>lldpad</b> 서비스 시작을 활성화하거나 비활성화합니다.</p>" -#. Services dialog help 2/3 -#: src/include/fcoe-client/helps.rb:76 -msgid "" -"<p>Starting the service <b>fcoe</b> means starting the <i>Fibre Channel over " -"Ethernet</i> service daemon <i>fcoemon</i> which controls the FCoE " -"interfaces and establishes a connection with the daemon <i>lldpad</i>.</p>" -msgstr "" -"<p><b>fcoe</b> 서비스 시작은 FCoE 인터페이스를 제어하고 <i>lldpad</i> 데몬과" -"의 연결을 설정하는 <i>FCoE(Fibre Channel over Ethernet)</i> 서비스 데몬 " -"<i>fcoemon</i> 시작을 의미합니다.</p>" +#. Services dialog help 2/3 +#: src/include/fcoe-client/helps.rb:76 +msgid "<p>Starting the service <b>fcoe</b> means starting the <i>Fibre Channel over Ethernet</i> service daemon <i>fcoemon</i> which controls the FCoE interfaces and establishes a connection with the daemon <i>lldpad</i>.</p>" +msgstr "<p><b>fcoe</b> 서비스 시작은 FCoE 인터페이스를 제어하고 <i>lldpad</i> 데몬과의 연결을 설정하는 <i>FCoE(Fibre Channel over Ethernet)</i> 서비스 데몬 <i>fcoemon</i> 시작을 의미합니다.</p>" -#. Services dialog help 3/3 -#: src/include/fcoe-client/helps.rb:82 -msgid "" -"<p>The <b>lldpad</b> service provides the <i>Link Layer Discovery Protocol agent daemon <i>lldpad</i>, which informs <i>fcoemon</i> about DCB (Data " -"Center Bridging) features and configuration of the interfaces.</p>" -msgstr "" -"<p><b>lldpad</b> 서비스는 <i>fcoemon</i>에 DCB(Data Center Bridging) 기능과 " -"인터페이스 구성을 알리는 <i>Link Layer Discovery Protocol</i> 에이전트 데몬 " -"<i>lldpad</i>를 제공합니다.</p>" +#. Services dialog help 3/3 +#: src/include/fcoe-client/helps.rb:82 +msgid "<p>The <b>lldpad</b> service provides the <i>Link Layer Discovery Protocol</i> agent daemon <i>lldpad</i>, which informs <i>fcoemon</i> about DCB (Data Center Bridging) features and configuration of the interfaces.</p>" +msgstr "<p><b>lldpad</b> 서비스는 <i>fcoemon</i>에 DCB(Data Center Bridging) 기능과 인터페이스 구성을 알리는 <i>Link Layer Discovery Protocol</i> 에이전트 데몬 <i>lldpad</i>를 제공합니다.</p>" -#. Interfaces dialog help 1/5 -#: src/include/fcoe-client/helps.rb:88 +#. Interfaces dialog help 1/5 +#: src/include/fcoe-client/helps.rb:88 msgid "<p><b><big>Network interface overview</big></b></p>" msgstr "<p><b><big>네트워크 인터페이스 개요</big></b></p>" -#. Interfaces dialog help 2/5 -#: src/include/fcoe-client/helps.rb:92 -msgid "" -"<p>The interfaces dialog shows all detected netcards including the status of " -"VLAN and FCoE configuration.<br>FCoE is possible if a VLAN interface is " -"configured for FCoE on the switch.<br>For every netcard (network interface), " -"this is shown in column <i>FCoE VLAN Interface</i>.</p>" -msgstr "" -"<p>인터페이스 대화 상자는 VLAN 및 FCoE 구성 상태를 포함하여 검색된 모든 넷카" -"드를 표시합니다.<br>FCoE는 스위치에 FCoE에 대한 VLAN 인터페이스가 구성되어 있" -"는 경우에 가능합니다.<br>각 넷카드(네트워크 인터페이스)에 대해 <i>FCoE VLAN " -"인터페이스</i> 열에 표시됩니다.</p>" +#. Interfaces dialog help 2/5 +#: src/include/fcoe-client/helps.rb:92 +msgid "<p>The interfaces dialog shows all detected netcards including the status of VLAN and FCoE configuration.<br>FCoE is possible if a VLAN interface is configured for FCoE on the switch.<br>For every netcard (network interface), this is shown in column <i>FCoE VLAN Interface</i>.</p>" +msgstr "<p>인터페이스 대화 상자는 VLAN 및 FCoE 구성 상태를 포함하여 검색된 모든 넷카드를 표시합니다.<br>FCoE는 스위치에 FCoE에 대한 VLAN 인터페이스가 구성되어 있는 경우에 가능합니다.<br>각 넷카드(네트워크 인터페이스)에 대해 <i>FCoE VLAN 인터페이스</i> 열에 표시됩니다.</p>" -#. Interfaces dialog help 3/5 -#: src/include/fcoe-client/helps.rb:99 -msgid "" -"<p>It's possible to retry the check for FCoE services by using <b>Retry " -"Detection</b>(might be required for interfaces needing some time to get up)." -"</p>" -msgstr "" -"<p><b>검색 재시도</b>를 사용하여 FCoE 서비스 확인을 재시도할 수 있습니다(작동" -"하는 데 시간이 걸리는 인터페이스에 필요할 수 있음).</p>" +#. Interfaces dialog help 3/5 +#: src/include/fcoe-client/helps.rb:99 +msgid "<p>It's possible to retry the check for FCoE services by using <b>Retry Detection</b>(might be required for interfaces needing some time to get up).</p>" +msgstr "<p><b>검색 재시도</b>를 사용하여 FCoE 서비스 확인을 재시도할 수 있습니다(작동하는 데 시간이 걸리는 인터페이스에 필요할 수 있음).</p>" -#. Interfaces dialog help 4/5 -#: src/include/fcoe-client/helps.rb:103 -msgid "" -"<p>The values for <i>FCoE VLAN Interface</i> in detail:<br><b>not available: Fibre Channel over Ethernet is not possible (must be enabled on the " -"switch first).<br><b>not configured</b>: FCoE is possible but not yet " -"activated.<br>Press <b>Create FCoE VLAN Interface</b> to activate.<br>If the " -"FCoE VLAN interface has already been created, the name is shown in the " -"column, e.g. eth3.200.</p>" -msgstr "" -"<p><i>FCoE VLAN 인터페이스</i> 값 세부 사항:<br><b>사용 불가능</b>: FCoE" -"(Fibre Channel over Ethernet)를 사용할 수 없습니다(먼저 스위치에서 활성화해" -"야 함).<br><b>구성되지 않음</b>: FCoE가 가능하지만 아직 활성화되지 않았습니" -"다.<br><b>FCoE VLAN 인터페이스 생성</b>을 눌러 활성화하십시오.<br>FCoE VLAN " -"인터페이스가 이미 생성된 경우 이름이 열에 표시됩니다(예: eth3.200).</p>" +#. Interfaces dialog help 4/5 +#: src/include/fcoe-client/helps.rb:103 +msgid "<p>The values for <i>FCoE VLAN Interface</i> in detail:<br><b>not available</b>: Fibre Channel over Ethernet is not possible (must be enabled on the switch first).<br><b>not configured</b>: FCoE is possible but not yet activated.<br>Press <b>Create FCoE VLAN Interface</b> to activate.<br>If the FCoE VLAN interface has already been created, the name is shown in the column, e.g. eth3.200.</p>" +msgstr "<p><i>FCoE VLAN 인터페이스</i> 값 세부 사항:<br><b>사용 불가능</b>: FCoE(Fibre Channel over Ethernet)를 사용할 수 없습니다(먼저 스위치에서 활성화해야 함).<br><b>구성되지 않음</b>: FCoE가 가능하지만 아직 활성화되지 않았습니다.<br><b>FCoE VLAN 인터페이스 생성</b>을 눌러 활성화하십시오.<br>FCoE VLAN 인터페이스가 이미 생성된 경우 이름이 열에 표시됩니다(예: eth3.200).</p>" -#. Interfaces dialog help 4/5 -#: src/include/fcoe-client/helps.rb:113 -msgid "" -"<p>To change the configuration of a FCoE VLAN interface, click on <b>Change " -"Settings</b>.</p>" -msgstr "" -"<p>FCoE VLAN 인터페이스 구성을 변경하려면 <b>설정 변경</b>을 클릭하십시오." +#. Interfaces dialog help 4/5 +#: src/include/fcoe-client/helps.rb:113 +msgid "<p>To change the configuration of a FCoE VLAN interface, click on <b>Change Settings</b>.</p>" +msgstr "<p>FCoE VLAN 인터페이스 구성을 변경하려면 <b>설정 변경</b>을 클릭하십시오.</p>" -#. Configuration dialog help 1/3 -#: src/include/fcoe-client/helps.rb:117 +#. Configuration dialog help 1/3 +#: src/include/fcoe-client/helps.rb:117 msgid "<p><b><big>General Configuration of FCoE</big></b></p>" msgstr "<p><b><big>FCoE 일반 구성</big></b></p>" -#. Configuration dialog help 2/3 -#: src/include/fcoe-client/helps.rb:121 -msgid "" -"<p>Configure the general settings for the FCoE system service. The settings " -"are written to '/etc/fcoe/config'.</p>" -msgstr "" -"<p>FCoE 시스템 서비스에 대한 일반 설정을 구성하십시오. 설정은 '/etc/fcoe/" -"config'에 기록됩니다.</p>" +#. Configuration dialog help 2/3 +#: src/include/fcoe-client/helps.rb:121 +msgid "<p>Configure the general settings for the FCoE system service. The settings are written to '/etc/fcoe/config'.</p>" +msgstr "<p>FCoE 시스템 서비스에 대한 일반 설정을 구성하십시오. 설정은 '/etc/fcoe/config'에 기록됩니다.</p>" -#. Configuration dialog help 3/3 -#: src/include/fcoe-client/helps.rb:125 +#. Configuration dialog help 3/3 +#: src/include/fcoe-client/helps.rb:125 msgid "" "<p>The values are:<br>\n" -"<b>Debug</b>: <i>yes</i> or <i>no</i><br>This is used to enable or disable " -"debugging messages from the fcoe service script and <i>fcoemon</i>." -"<br><b>Use syslog</b>: <i>yes</i> or <i>no</i><br>Messages are sent to the " -"system log if set to <i>yes</i> (data are logged to /var/log/messages).</p>" +"<b>Debug</b>: <i>yes</i> or <i>no</i><br>This is used to enable or disable debugging messages from the fcoe service script and <i>fcoemon</i>.<br><b>Use syslog</b>: <i>yes</i> or <i>no</i><br>Messages are sent to the system log if set to <i>yes</i> (data are logged to /var/log/messages).</p>" msgstr "" "<p>값은 다음과 같습니다.<br>\n" -"<b>디버그</b>: <i>예</i> 또는 <i>아니요</i><br>fcoe 서비스 스크립트 및 " -"<i>fcoemon</i>에서 디버깅 메시지를 활성화하거나 비활성화하는 데 사용됩니다." -"<br><b>syslog 사용</b>: <i>예</i> 또는 <i>아니요</i><br><i>예</i>로 설정된 경" -"우 시스템 로그에 메시지가 전송됩니다(데이터가 /var/log/messages에 기록됨)." +"<b>디버그</b>: <i>예</i> 또는 <i>아니요</i><br>fcoe 서비스 스크립트 및 <i>fcoemon</i>에서 디버깅 메시지를 활성화하거나 비활성화하는 데 사용됩니다.<br><b>syslog 사용</b>: <i>예</i> 또는 <i>아니요</i><br><i>예</i>로 설정된 경우 시스템 로그에 메시지가 전송됩니다(데이터가 /var/log/messages에 기록됨).</p>" -#. edit dialog help 1/3 -#: src/include/fcoe-client/helps.rb:133 +#. edit dialog help 1/3 +#: src/include/fcoe-client/helps.rb:133 msgid "<p>Edit Settings in /etc/fcoe/ethx</p>" msgstr "<p>/etc/fcoe/ethx에서 설정 편집</p>" -#. Edit dialog help 2/3 -#: src/include/fcoe-client/helps.rb:137 -msgid "" -"<p>The daemon <i>fcoemon</i> reads these configuration files on " -"initialization.<br>There is a file for every interface and the values " -"indicate whether FCoE instances should be created and if DCB is required.</p>" -msgstr "" -"<p><i>fcoemon</i> 데몬은 초기화 시 이러한 구성 파일을 읽습니다.<br>각 인터페" -"이스에 대한 파일이 있으며 값은 FCoE 인터페이스를 생성할지 여부 및 DCB가 필요" -"한지 여부를 나타냅니다.</p>" +#. Edit dialog help 2/3 +#: src/include/fcoe-client/helps.rb:137 +msgid "<p>The daemon <i>fcoemon</i> reads these configuration files on initialization.<br>There is a file for every interface and the values indicate whether FCoE instances should be created and if DCB is required.</p>" +msgstr "<p><i>fcoemon</i> 데몬은 초기화 시 이러한 구성 파일을 읽습니다.<br>각 인터페이스에 대한 파일이 있으며 값은 FCoE 인터페이스를 생성할지 여부 및 DCB가 필요한지 여부를 나타냅니다.</p>" -#. Edit dialog help 3/3 -#: src/include/fcoe-client/helps.rb:143 -msgid "" -"<p>The values are:<br><b>FCoE Enable</b>: <i>yes</i> or <i>no</i><br>Enable " -"or disable the creation of FCoE instances.<br><b>DCB Required</b>: <i>yes or <i>no</i><br>The default is <i>yes</i>, DCB is usually required." -"<br><b>AUTO VLAN</b>: <i>yes</i> or <i>no</i><br>If set to <i>yes</i> " -"'fcoemon' will create the VLAN interfaces automatically.</p>" -msgstr "" -"<p>값은 다음과 같습니다.<br><b>FCoE 활성화</b>: <i>예</i> 또는 <i>아니요<br>FCoE 인스턴스 생성을 활성화하거나 비활성화합니다.<br><b>DCB 필요</b>: " -"<i>예</i> 또는 <i>아니요</i><br>기본값은 <i>예</i>이고, 일반적으로 DCB가 필요" -"합니다.<br><b>AUTO VLAN</b>: <i>예</i> 또는 <i>아니요</i><br><i>예</i>로 설정" -"된 경우 'fcoemon'은 VLAN 인터페이스를 자동으로 생성합니다.</p>" +#. Edit dialog help 3/3 +#: src/include/fcoe-client/helps.rb:143 +msgid "<p>The values are:<br><b>FCoE Enable</b>: <i>yes</i> or <i>no</i><br>Enable or disable the creation of FCoE instances.<br><b>DCB Required</b>: <i>yes</i> or <i>no</i><br>The default is <i>yes</i>, DCB is usually required.<br><b>AUTO VLAN</b>: <i>yes</i> or <i>no</i><br>If set to <i>yes</i> 'fcoemon' will create the VLAN interfaces automatically.</p>" +msgstr "<p>값은 다음과 같습니다.<br><b>FCoE 활성화</b>: <i>예</i> 또는 <i>아니요</i><br>FCoE 인스턴스 생성을 활성화하거나 비활성화합니다.<br><b>DCB 필요</b>: <i>예</i> 또는 <i>아니요</i><br>기본값은 <i>예</i>이고, 일반적으로 DCB가 필요합니다.<br><b>AUTO VLAN</b>: <i>예</i> 또는 <i>아니요</i><br><i>예</i>로 설정된 경우 'fcoemon'은 VLAN 인터페이스를 자동으로 생성합니다.</p>" -#. Header of tab in tab widget -#. Header of tab in tab widget -#: src/include/fcoe-client/wizards.rb:110 -#: src/include/fcoe-client/wizards.rb:133 +#. Header of tab in tab widget +#. Header of tab in tab widget +#: src/include/fcoe-client/wizards.rb:110 +#: src/include/fcoe-client/wizards.rb:133 msgid "&Interfaces" msgstr "인터페이스(&I)" -#. Header of tab in tab widget -#. Header of tab in tab widget -#: src/include/fcoe-client/wizards.rb:116 -#: src/include/fcoe-client/wizards.rb:139 +#. Header of tab in tab widget +#. Header of tab in tab widget +#: src/include/fcoe-client/wizards.rb:116 +#: src/include/fcoe-client/wizards.rb:139 msgid "&Configuration" msgstr "구성(&N)" -#. Header of tab in tab widget -#: src/include/fcoe-client/wizards.rb:127 +#. Header of tab in tab widget +#: src/include/fcoe-client/wizards.rb:127 msgid "&Services" msgstr "서비스(&S)" -#. Initialization dialog caption -#: src/include/fcoe-client/wizards.rb:184 +#. Initialization dialog caption +#: src/include/fcoe-client/wizards.rb:184 msgid "Fibre Channel over Ethernet Configuration" msgstr "FCoE(Fibre Channel over Ethernet) 구성" -#. TODO: rename icon to yast-fcoe (yast2-theme package) -#: src/include/fcoe-client/wizards.rb:209 +#. TODO: rename icon to yast-fcoe (yast2-theme package) +#: src/include/fcoe-client/wizards.rb:209 msgid "Change FCoE Settings" msgstr "FCoE 설정 변경" -#. Initialization dialog caption -#: src/include/fcoe-client/wizards.rb:315 +#. Initialization dialog caption +#: src/include/fcoe-client/wizards.rb:315 msgid "FcoeClient Configuration" msgstr "FCoE 클라이언트 구성" -#. Initialization dialog contents -#: src/include/fcoe-client/wizards.rb:317 +#. Initialization dialog contents +#: src/include/fcoe-client/wizards.rb:317 msgid "Initializing..." msgstr "초기화 중..." -#. don't check interactively for packages (bnc#367300) -> comment from iscsi-client -#. skip it during initial and second stage or when create AY profile -#: src/modules/FcoeClient.rb:413 -msgid "" -"<p>To continue the FCoE configuration, the <b>%1</b> package must be " -"installed.</p>" +#. don't check interactively for packages (bnc#367300) -> comment from iscsi-client +#. skip it during initial and second stage or when create AY profile +#: src/modules/FcoeClient.rb:413 +msgid "<p>To continue the FCoE configuration, the <b>%1</b> package must be installed.</p>" msgstr "<p>FCoE 구성을 계속하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" -#: src/modules/FcoeClient.rb:416 +#: src/modules/FcoeClient.rb:416 msgid "<p>Install it now?</p>" msgstr "<p>지금 설치하시겠습니까?</p>" -#. start service lldpad first -#: src/modules/FcoeClient.rb:859 +#. start service lldpad first +#: src/modules/FcoeClient.rb:859 msgid "Cannot start service 'lldpad'" msgstr "'lldpad' 서비스를 시작할 수 없습니다." -#: src/modules/FcoeClient.rb:868 +#: src/modules/FcoeClient.rb:868 msgid "Cannot start service 'fcoe'" msgstr "'fcoe' 서비스를 시작할 수 없습니다." -#. first start lldpad -#: src/modules/FcoeClient.rb:888 +#. first start lldpad +#: src/modules/FcoeClient.rb:888 msgid "Cannot start lldpad systemd socket" msgstr "lldpad systemd 소켓을 시작할 수 없습니다." -#: src/modules/FcoeClient.rb:901 +#: src/modules/FcoeClient.rb:901 msgid "Cannot start lldpad service." msgstr "lldpad 서비스를 시작할 수 없습니다." -#: src/modules/FcoeClient.rb:913 +#: src/modules/FcoeClient.rb:913 msgid "Cannot start fcoemon systemd socket." msgstr "fcoemon systemd 소켓을 시작할 수 없습니다." -#: src/modules/FcoeClient.rb:926 +#: src/modules/FcoeClient.rb:926 msgid "Cannot start fcoe service." msgstr "fcoe 서비스를 시작할 수 없습니다." -#. warning if no valid configuration found -#: src/modules/FcoeClient.rb:1092 +#. warning if no valid configuration found +#: src/modules/FcoeClient.rb:1092 msgid "" "Cannot read config file for %1.\n" "You may edit the settings and recreate the FCoE\n" @@ -638,113 +562,113 @@ "설정을 편집하고 FCoE\n" "VLAN 인터페이스를 다시 생성하여 유효한 구성을 가져올 수 있습니다." -#. FcoeClient read dialog caption -#: src/modules/FcoeClient.rb:1457 +#. FcoeClient read dialog caption +#: src/modules/FcoeClient.rb:1457 msgid "Initializing fcoe-client Configuration" msgstr "FCoE 클라이언트 구성 초기화" -#. Progress stage 1/3 -#: src/modules/FcoeClient.rb:1472 +#. Progress stage 1/3 +#: src/modules/FcoeClient.rb:1472 msgid "Check installed packages" msgstr "설치된 패키지 확인" -#. Progress stage 2/3 -#: src/modules/FcoeClient.rb:1474 +#. Progress stage 2/3 +#: src/modules/FcoeClient.rb:1474 msgid "Check services" msgstr "서비스 확인" -#. Progress stage 3/3 -#: src/modules/FcoeClient.rb:1476 +#. Progress stage 3/3 +#: src/modules/FcoeClient.rb:1476 msgid "Detect network cards" msgstr "네트워크 카드 감지" -#. Progress stage 4/4 -#: src/modules/FcoeClient.rb:1478 +#. Progress stage 4/4 +#: src/modules/FcoeClient.rb:1478 msgid "Read /etc/fcoe/config" msgstr "/etc/fcoe/config 읽기" -#. Progress step 1/3 -#: src/modules/FcoeClient.rb:1482 +#. Progress step 1/3 +#: src/modules/FcoeClient.rb:1482 msgid "Checking for installed packages..." msgstr "설치된 패키지를 확인하는 중..." -#. Progress step 2/3 -#: src/modules/FcoeClient.rb:1484 +#. Progress step 2/3 +#: src/modules/FcoeClient.rb:1484 msgid "Checking for services..." msgstr "서비스를 확인하는 중..." -#. Progress step 3/3 -#: src/modules/FcoeClient.rb:1486 +#. Progress step 3/3 +#: src/modules/FcoeClient.rb:1486 msgid "Detecting network cards..." msgstr "네트워크 카드를 감지하는 중..." -#. Progress step 4/4 -#: src/modules/FcoeClient.rb:1488 +#. Progress step 4/4 +#: src/modules/FcoeClient.rb:1488 msgid "Reading /etc/fcoe/config" msgstr "/etc/fcoe/config 읽는 중" -#. Progress finished -#. Progress finished -#: src/modules/FcoeClient.rb:1490 src/modules/FcoeClient.rb:1584 +#. Progress finished +#. Progress finished +#: src/modules/FcoeClient.rb:1490 src/modules/FcoeClient.rb:1584 msgid "Finished" msgstr "완료됨" -#. Error message -#: src/modules/FcoeClient.rb:1516 +#. Error message +#: src/modules/FcoeClient.rb:1516 msgid "Starting of services failed." msgstr "서비스를 시작하지 못했습니다." -#. Error message -#: src/modules/FcoeClient.rb:1529 +#. Error message +#: src/modules/FcoeClient.rb:1529 msgid "Cannot detect devices." msgstr "장치를 감지할 수 없습니다." -#. Error message -#: src/modules/FcoeClient.rb:1539 +#. Error message +#: src/modules/FcoeClient.rb:1539 msgid "Cannot read /etc/fcoe/config." msgstr "/etc/fcoe/config를 읽을 수 없습니다." -#. FcoeClient read dialog caption -#: src/modules/FcoeClient.rb:1555 +#. FcoeClient read dialog caption +#: src/modules/FcoeClient.rb:1555 msgid "Saving fcoe-client Configuration" msgstr "FCoE 클라이언트 구성 저장" -#. Progress stage 1/2 -#: src/modules/FcoeClient.rb:1570 +#. Progress stage 1/2 +#: src/modules/FcoeClient.rb:1570 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress stage 2/3 -#: src/modules/FcoeClient.rb:1572 +#. Progress stage 2/3 +#: src/modules/FcoeClient.rb:1572 msgid "Restart FCoE service" msgstr "FCoE 서비스 재시작" -#. Progress stage 3/3 -#: src/modules/FcoeClient.rb:1574 +#. Progress stage 3/3 +#: src/modules/FcoeClient.rb:1574 msgid "Adjust start of services" msgstr "서비스 시작 조정" -#. Progress step 1/2 -#: src/modules/FcoeClient.rb:1578 +#. Progress step 1/2 +#: src/modules/FcoeClient.rb:1578 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Progress step 2/3 -#: src/modules/FcoeClient.rb:1580 +#. Progress step 2/3 +#: src/modules/FcoeClient.rb:1580 msgid "Restarting FCoE service..." msgstr "FCoE 서비스 재시작 중..." -#. Progress sstep 3/3 -#: src/modules/FcoeClient.rb:1582 +#. Progress sstep 3/3 +#: src/modules/FcoeClient.rb:1582 msgid "Adjusting start of services..." msgstr "서비스 시작 조정 중..." -#. Error message -#: src/modules/FcoeClient.rb:1602 +#. Error message +#: src/modules/FcoeClient.rb:1602 msgid "Cannot write settings to /etc/fcoe/config." msgstr "/etc/fcoe/config에 설정을 쓸 수 없습니다." -#: src/modules/FcoeClient.rb:1608 +#: src/modules/FcoeClient.rb:1608 msgid "" "Cannot write settings for FCoE interfaces.\n" "For details, see /var/log/YaST2/y2log." @@ -752,43 +676,43 @@ "FCoE 인터페이스에 대한 설정을 쓸 수 없습니다.\n" "자세한 내용은 /var/log/YaST2/y2log를 참조하십시오." -#. Error message -#: src/modules/FcoeClient.rb:1620 +#. Error message +#: src/modules/FcoeClient.rb:1620 msgid "Restarting of service fcoe failed." msgstr "FCoE 서비스를 시작하지 못했습니다." -#. Error message -#: src/modules/FcoeClient.rb:1627 +#. Error message +#: src/modules/FcoeClient.rb:1627 msgid "Cannot write /etc/sysconfig/network/ifcfg-files." msgstr "/etc/sysconfig/network/ifcfg 파일을 쓸 수 없습니다." -#. Configuration summary text for autoyast -#: src/modules/FcoeClient.rb:1684 +#. Configuration summary text for autoyast +#: src/modules/FcoeClient.rb:1684 msgid "<b>General FCoE configuration</b>" msgstr "<b>일반 FCoE 구성</b>" -#. options from config file, not meant for translation -#: src/modules/FcoeClient.rb:1698 +#. options from config file, not meant for translation +#: src/modules/FcoeClient.rb:1698 msgid "<b>Interfaces</b>" msgstr "<b>인터페이스</b>" -#. network card, e.g. eth0 -#: src/modules/FcoeClient.rb:1706 +#. network card, e.g. eth0 +#: src/modules/FcoeClient.rb:1706 msgid "<i>Netcard</i>:" msgstr "<i>넷카드</i>:" -#. nothing to translate here (abbreviation for -#. Fibre Channel over Ethernet Virtual LAN interface) -#: src/modules/FcoeClient.rb:1716 +#. nothing to translate here (abbreviation for +#. Fibre Channel over Ethernet Virtual LAN interface) +#: src/modules/FcoeClient.rb:1716 msgid "<b>Starting of services</b>" msgstr "<b>서비스 시작</b>" -#. starting of service "fcoe" at boot time is enabled or disabled -#. starting of service "lldpad" at boot time is enabled or disabled -#: src/modules/FcoeClient.rb:1724 src/modules/FcoeClient.rb:1734 +#. starting of service "fcoe" at boot time is enabled or disabled +#. starting of service "lldpad" at boot time is enabled or disabled +#: src/modules/FcoeClient.rb:1724 src/modules/FcoeClient.rb:1734 msgid "enabled" msgstr "활성화됨" -#: src/modules/FcoeClient.rb:1725 src/modules/FcoeClient.rb:1735 +#: src/modules/FcoeClient.rb:1725 src/modules/FcoeClient.rb:1735 msgid "disabled" msgstr "비활성화됨" Modified: branches/SLE12-SP3/yast/ko/po/firewall-services.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/firewall-services.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/firewall-services.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,255 +14,246 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. TRANSLATORS: Name of Service (File name: avahi, RPM: avahi), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:37 +#. TRANSLATORS: Name of Service (File name: avahi, RPM: avahi), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:37 msgid "Zeroconf/Bonjour Multicast DNS" msgstr "Zeroconf/Bonjour Multicast DNS" -#. TRANSLATORS: Description of a Service (File name: avahi, RPM: avahi), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:40 -msgid "" -"Zeroconf/Bonjour Multicast DNS (mDNS) ports for Service Discovery (DNS-SD)" +#. TRANSLATORS: Description of a Service (File name: avahi, RPM: avahi), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:40 +msgid "Zeroconf/Bonjour Multicast DNS (mDNS) ports for Service Discovery (DNS-SD)" msgstr "Service Discovery용 Zeroconf/Bonjour Multicast DNS(mDNS) 포트(DNS-SD)" -#. TRANSLATORS: Name of Service (File name: cyrus-imapd, RPM: cyrus-imapd), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:45 +#. TRANSLATORS: Name of Service (File name: cyrus-imapd, RPM: cyrus-imapd), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:45 msgid "cyrus-imapd Server" msgstr "cyrus-imapd 서버" -#. TRANSLATORS: Description of a Service (File name: cyrus-imapd, RPM: cyrus-imapd), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:48 +#. TRANSLATORS: Description of a Service (File name: cyrus-imapd, RPM: cyrus-imapd), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:48 msgid "Open ports for the cyrus-imapd Server." msgstr "cyrus-imapd 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: dhcp-server, RPM: dhcp), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:51 +#. TRANSLATORS: Name of Service (File name: dhcp-server, RPM: dhcp), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:51 msgid "DHCPv4 Server" msgstr "DHCPv4 서버" -#. TRANSLATORS: Description of a Service (File name: dhcp-server, RPM: dhcp), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:54 +#. TRANSLATORS: Description of a Service (File name: dhcp-server, RPM: dhcp), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:54 msgid "Open ports for ISC DHCPv4 4.x server." msgstr "ISC DHCPv4 4.x 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: dnsmasq-dhcp, RPM: dnsmasq), can be used as check box, item in multiple selection box... -#. TRANSLATORS: Name of Service (File name: dnsmasq-dns, RPM: dnsmasq), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:57 -#: library/network/src/yast2-services-translations.rb:63 +#. TRANSLATORS: Name of Service (File name: dnsmasq-dhcp, RPM: dnsmasq), can be used as check box, item in multiple selection box... +#. TRANSLATORS: Name of Service (File name: dnsmasq-dns, RPM: dnsmasq), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:57 +#: library/network/src/yast2-services-translations.rb:63 msgid "dnsmasq" msgstr "dnsmasq" -#. TRANSLATORS: Description of a Service (File name: dnsmasq-dhcp, RPM: dnsmasq), used as a common label or an item in table -#. TRANSLATORS: Description of a Service (File name: dnsmasq-dns, RPM: dnsmasq), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:60 -#: library/network/src/yast2-services-translations.rb:66 +#. TRANSLATORS: Description of a Service (File name: dnsmasq-dhcp, RPM: dnsmasq), used as a common label or an item in table +#. TRANSLATORS: Description of a Service (File name: dnsmasq-dns, RPM: dnsmasq), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:60 +#: library/network/src/yast2-services-translations.rb:66 msgid "Open ports for the dnsmasq DNS/DHCP server." msgstr "dnsmasq DNS/DHCP 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: hplip, RPM: hplip), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:69 +#. TRANSLATORS: Name of Service (File name: hplip, RPM: hplip), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:69 msgid "mDNS/Bonjour support for HPLIP" msgstr "HPLIP용 mDNS/Bonjour 지원" -#. TRANSLATORS: Description of a Service (File name: hplip, RPM: hplip), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:72 +#. TRANSLATORS: Description of a Service (File name: hplip, RPM: hplip), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:72 msgid "Firewall Configuration file for mDNS/Bonjour support for HPLIP" msgstr "HPLIP용 mDNS/Bonjour 지원을 위한 방화벽 구성 파일" -#. TRANSLATORS: Name of Service (File name: iceccd, RPM: icecream), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:77 +#. TRANSLATORS: Name of Service (File name: iceccd, RPM: icecream), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:77 msgid "icecream daemon" msgstr "icecream 데몬" -#. TRANSLATORS: Description of a Service (File name: iceccd, RPM: icecream), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:80 +#. TRANSLATORS: Description of a Service (File name: iceccd, RPM: icecream), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:80 msgid "opens socket for the icecream compilation daemon" msgstr "icecream compilation 데몬 소켓 열기" -#. TRANSLATORS: Name of Service (File name: icecream-scheduler, RPM: icecream), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:83 +#. TRANSLATORS: Name of Service (File name: icecream-scheduler, RPM: icecream), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:83 msgid "icecream scheduler" msgstr "icecream 스캐줄러" -#. TRANSLATORS: Description of a Service (File name: icecream-scheduler, RPM: icecream), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:86 +#. TRANSLATORS: Description of a Service (File name: icecream-scheduler, RPM: icecream), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:86 msgid "Opens ports for the icecream scheduler" msgstr "Icecream 스캐줄러용 포트 열기" -#. TRANSLATORS: Name of Service (File name: isns, RPM: isns), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:89 +#. TRANSLATORS: Name of Service (File name: isns, RPM: isns), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:89 msgid "iSNS Daemon" msgstr "iSNS 데몬" -#. TRANSLATORS: Description of a Service (File name: isns, RPM: isns), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:92 +#. TRANSLATORS: Description of a Service (File name: isns, RPM: isns), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:92 msgid "Open ports for iSNS daemon with broadcast allowed." msgstr "브로드캐스트가 허용되는 iSNS 데몬에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: netbios-server, RPM: samba), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:95 +#. TRANSLATORS: Name of Service (File name: netbios-server, RPM: samba), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:95 msgid "Netbios Server" msgstr "Netbios 서버" -#. TRANSLATORS: Description of a Service (File name: netbios-server, RPM: samba), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:98 +#. TRANSLATORS: Description of a Service (File name: netbios-server, RPM: samba), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:98 msgid "Open ports for Samba Netbios server with broadcast allowed." msgstr "브로드캐스트가 허용되는 Samba Netbios 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: nfs-client, RPM: nfs-client), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:103 +#. TRANSLATORS: Name of Service (File name: nfs-client, RPM: nfs-client), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:103 msgid "NFS Client" msgstr "NFS 클라이언트" -#. TRANSLATORS: Description of a Service (File name: nfs-client, RPM: nfs-client), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:106 -msgid "" -"Firewall configuration for NFS client. Open ports for NFS client to allow " -"connection to an NFS server." -msgstr "" -"NFS 클라이언트에 대한 방화벽 구성입니다. NFS 서버에 대한 연결을 허용하도록 " -"NFS 클라이언트에 대한 포트를 엽니다." +#. TRANSLATORS: Description of a Service (File name: nfs-client, RPM: nfs-client), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:106 +msgid "Firewall configuration for NFS client. Open ports for NFS client to allow connection to an NFS server." +msgstr "NFS 클라이언트에 대한 방화벽 구성입니다. NFS 서버에 대한 연결을 허용하도록 NFS 클라이언트에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: nfs-kernel-server, RPM: nfs-kernel-server), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:111 +#. TRANSLATORS: Name of Service (File name: nfs-kernel-server, RPM: nfs-kernel-server), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:111 msgid "NFS Server Service" msgstr "NFS 서버 서비스" -#. TRANSLATORS: Description of a Service (File name: nfs-kernel-server, RPM: nfs-kernel-server), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:114 -msgid "" -"Firewall configuration for NFS kernel server. Open ports for NFS to allow " -"other hosts to connect." -msgstr "" -"NFS 커널 서버에 대한 방화벽 구성입니다. 다른 호스트의 연결을 허용하도록 NFS" -"에 대한 포트를 엽니다." +#. TRANSLATORS: Description of a Service (File name: nfs-kernel-server, RPM: nfs-kernel-server), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:114 +msgid "Firewall configuration for NFS kernel server. Open ports for NFS to allow other hosts to connect." +msgstr "NFS 커널 서버에 대한 방화벽 구성입니다. 다른 호스트의 연결을 허용하도록 NFS에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: ntp, RPM: ntp), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:119 +#. TRANSLATORS: Name of Service (File name: ntp, RPM: ntp), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:119 msgid "xntp Server" msgstr "xntp 서버" -#. TRANSLATORS: Description of a Service (File name: ntp, RPM: ntp), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:122 +#. TRANSLATORS: Description of a Service (File name: ntp, RPM: ntp), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:122 msgid "Open ports for xntp." msgstr "xntp에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: openldap, RPM: openldap2), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:125 +#. TRANSLATORS: Name of Service (File name: openldap, RPM: openldap2), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:125 msgid "OpenLDAP Server" msgstr "OpenLDAP 서버" -#. TRANSLATORS: Description of a Service (File name: openldap, RPM: openldap2), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:128 +#. TRANSLATORS: Description of a Service (File name: openldap, RPM: openldap2), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:128 msgid "Open ports for the OpenLDAP server (slapd)." msgstr "OpenLDAP 서버(slapd)에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: openslp, RPM: openslp-server), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:131 +#. TRANSLATORS: Name of Service (File name: openslp, RPM: openslp-server), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:131 msgid "OpenSLP Server (SLP)" msgstr "OpenSLP 서버(SLP)" -#. TRANSLATORS: Description of a Service (File name: openslp, RPM: openslp-server), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:134 +#. TRANSLATORS: Description of a Service (File name: openslp, RPM: openslp-server), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:134 msgid "Enable OpenSLP server to advertise services." msgstr "OpenSLP 서버가 서비스를 광고할 수 있게 합니다." -#. TRANSLATORS: Name of Service (File name: rsync-server, RPM: rsync), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:137 +#. TRANSLATORS: Name of Service (File name: rsync-server, RPM: rsync), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:137 msgid "Rsync server" msgstr "Rsync 서버" -#. TRANSLATORS: Description of a Service (File name: rsync-server, RPM: rsync), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:140 +#. TRANSLATORS: Description of a Service (File name: rsync-server, RPM: rsync), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:140 msgid "Opens port for rsync server in order to allow remote synchronization" msgstr "원격 동기화를 허용하기 위해 rsync 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: samba-client, RPM: samba-client), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:145 +#. TRANSLATORS: Name of Service (File name: samba-client, RPM: samba-client), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:145 msgid "Samba Client" msgstr "Samba 클라이언트" -#. TRANSLATORS: Description of a Service (File name: samba-client, RPM: samba-client), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:148 +#. TRANSLATORS: Description of a Service (File name: samba-client, RPM: samba-client), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:148 msgid "Enable browsing of SMB shares." msgstr "SMB 공유 검색을 활성화합니다." -#. TRANSLATORS: Name of Service (File name: samba-server, RPM: samba), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:151 +#. TRANSLATORS: Name of Service (File name: samba-server, RPM: samba), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:151 msgid "Samba Server" msgstr "Samba 서버" -#. TRANSLATORS: Description of a Service (File name: samba-server, RPM: samba), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:154 +#. TRANSLATORS: Description of a Service (File name: samba-server, RPM: samba), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:154 msgid "Open ports for Samba server." msgstr "Samba 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: sendmail, RPM: sendmail), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:157 +#. TRANSLATORS: Name of Service (File name: sendmail, RPM: sendmail), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:157 msgid "SMTP with sendmail" msgstr "sendmail을 포함한 SMTP" -#. TRANSLATORS: Description of a Service (File name: sendmail, RPM: sendmail), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:160 +#. TRANSLATORS: Description of a Service (File name: sendmail, RPM: sendmail), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:160 msgid "Firewall configuration file for sendmail" msgstr "sendmail에 대한 방화벽 구성 파일" -#. TRANSLATORS: Name of Service (File name: sshd, RPM: openssh), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:163 +#. TRANSLATORS: Name of Service (File name: sshd, RPM: openssh), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:163 msgid "Secure Shell Server" msgstr "Secure Shell 서버" -#. TRANSLATORS: Description of a Service (File name: sshd, RPM: openssh), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:166 +#. TRANSLATORS: Description of a Service (File name: sshd, RPM: openssh), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:166 msgid "Open ports for the Secure Shell server." msgstr "Secure Shell 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: svnserve, RPM: subversion), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:169 +#. TRANSLATORS: Name of Service (File name: svnserve, RPM: subversion), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:169 msgid "svnserve" msgstr "svnserve" -#. TRANSLATORS: Description of a Service (File name: svnserve, RPM: subversion), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:172 +#. TRANSLATORS: Description of a Service (File name: svnserve, RPM: subversion), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:172 msgid "Open ports for svnserve" msgstr "svnserve 포트 열기" -#. TRANSLATORS: Name of Service (File name: vnc-httpd, RPM: tightvnc), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:175 +#. TRANSLATORS: Name of Service (File name: vnc-httpd, RPM: tightvnc), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:175 msgid "VNC mini-HTTP server" msgstr "VNC mini-HTTP 서버" -#. TRANSLATORS: Description of a Service (File name: vnc-httpd, RPM: tightvnc), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:178 +#. TRANSLATORS: Description of a Service (File name: vnc-httpd, RPM: tightvnc), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:178 msgid "Opens the VNC HTTP ports so that browsers can connect." msgstr "브라우저에서 연결할 수 있도록 VNC HTTP 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: vnc-server, RPM: tightvnc), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:181 +#. TRANSLATORS: Name of Service (File name: vnc-server, RPM: tightvnc), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:181 msgid "VNC" msgstr "VNC" -#. TRANSLATORS: Description of a Service (File name: vnc-server, RPM: tightvnc), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:184 +#. TRANSLATORS: Description of a Service (File name: vnc-server, RPM: tightvnc), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:184 msgid "Open VNC server ports so that viewers can connect." msgstr "뷰어가 연결할 수 있도록 VNC 서버 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: vsftpd, RPM: vsftpd), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:187 +#. TRANSLATORS: Name of Service (File name: vsftpd, RPM: vsftpd), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:187 msgid "vsftpd Server" msgstr "vsftpd 서버" -#. TRANSLATORS: Description of a Service (File name: vsftpd, RPM: vsftpd), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:190 +#. TRANSLATORS: Description of a Service (File name: vsftpd, RPM: vsftpd), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:190 msgid "Open ports for vsftpd server." msgstr "vsftpd 서버에 대한 포트를 엽니다." -#. TRANSLATORS: Name of Service (File name: ypbind, RPM: ypbind), can be used as check box, item in multiple selection box... -#: library/network/src/yast2-services-translations.rb:193 +#. TRANSLATORS: Name of Service (File name: ypbind, RPM: ypbind), can be used as check box, item in multiple selection box... +#: library/network/src/yast2-services-translations.rb:193 msgid "NIS Client" msgstr "NIS 클라이언트" -#. TRANSLATORS: Description of a Service (File name: ypbind, RPM: ypbind), used as a common label or an item in table -#: library/network/src/yast2-services-translations.rb:196 +#. TRANSLATORS: Description of a Service (File name: ypbind, RPM: ypbind), used as a common label or an item in table +#: library/network/src/yast2-services-translations.rb:196 msgid "The ypbind daemon binds NIS clients to an NIS domain." msgstr "ypbind 데몬은 NIS 클라이언트를 NIS 도메인에 바인딩합니다." Modified: branches/SLE12-SP3/yast/ko/po/firewall.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/firewall.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/firewall.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,18 +14,18 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. We can't do ncurces. Lets see if the firewalld-config -#. is installed -#: src/clients/firewall.rb:70 +#. We can't do ncurces. Lets see if the firewalld-config +#. is installed +#: src/clients/firewall.rb:70 msgid "Your display can't support the 'firewall-config' UI.\n" msgstr "디스플레이가 'firewall-config' UI를 지원할 수 없습니다.\n" -#: src/clients/firewall.rb:71 +#: src/clients/firewall.rb:71 msgid "Either use the Yast2 command line or the 'firewall-cmd' utility." msgstr "Yast2 명령 줄 또는 'firewall-cmd' 유틸리티를 사용하십시오." -#. TRANSLATORS: message popup -#: src/clients/firewall_proposal.rb:113 +#. TRANSLATORS: message popup +#: src/clients/firewall_proposal.rb:113 msgid "" "Firewall configuration cannot be changed.\n" "The SuSEfirewall2 package is not installed." @@ -33,23 +33,23 @@ "방화벽 구성을 변경할 수 없습니다.\n" "SuSEfirewall2 패키지가 설치되어 있지 않습니다." -#. RichText label -#: src/clients/firewall_proposal.rb:233 +#. RichText label +#: src/clients/firewall_proposal.rb:233 msgid "Firewall" msgstr "방화벽" -#. Menu label -#: src/clients/firewall_proposal.rb:235 +#. Menu label +#: src/clients/firewall_proposal.rb:235 msgid "&Firewall" msgstr "방화벽(&F)" -#. TRANSLATORS: Popup headline -#: src/include/firewall/complex.rb:66 +#. TRANSLATORS: Popup headline +#: src/include/firewall/complex.rb:66 msgid "Another Firewall Active" msgstr "다른 방화벽 활성화" -#. TRANSLATORS: Popup text -#: src/include/firewall/complex.rb:68 +#. TRANSLATORS: Popup text +#: src/include/firewall/complex.rb:68 msgid "" "Another kind of firewall is active in your system.\n" "If you continue, SuSEfirewall2 may produce undefined errors.\n" @@ -63,13 +63,13 @@ " 제거하는 것이 좋습니다.\n" " 계속 구성하시겠습니까?\n" -#. TRANSLATORS: popup headline -#: src/include/firewall/complex.rb:108 +#. TRANSLATORS: popup headline +#: src/include/firewall/complex.rb:108 msgid "Aborting Firewall Configuration" msgstr "방화벽 구성 중단" -#. TRANSLATORS: popup message -#: src/include/firewall/complex.rb:110 +#. TRANSLATORS: popup message +#: src/include/firewall/complex.rb:110 msgid "" "All changes would be lost.\n" "Really abort configuration?\n" @@ -77,137 +77,137 @@ "모든 변경 사항을 잃게 됩니다.\n" "구성을 중단하시겠습니까?\n" -#. TRANSLATORS: Radio selection, See #h1 -#: src/include/firewall/dialogs.rb:65 +#. TRANSLATORS: Radio selection, See #h1 +#: src/include/firewall/dialogs.rb:65 msgid "&Enable Firewall Automatic Starting" msgstr "방화벽 자동 시작 활성화(&E)" -#. TRANSLATORS: Radio selection, See #h2 -#: src/include/firewall/dialogs.rb:69 +#. TRANSLATORS: Radio selection, See #h2 +#: src/include/firewall/dialogs.rb:69 msgid "&Disable Firewall Automatic Starting" msgstr "방화벽 자동 시작 비활성화(&D)" -#. TRANSLATORS: part of help text describind #h1, Do not use any shortcut -#: src/include/firewall/dialogs.rb:75 +#. TRANSLATORS: part of help text describind #h1, Do not use any shortcut +#: src/include/firewall/dialogs.rb:75 msgid "Enable Firewall Automatic Starting" msgstr "방화벽 자동 시작 사용" -#. TRANSLATORS: part of help text describing #h2, Do not use any shortcut -#: src/include/firewall/dialogs.rb:77 +#. TRANSLATORS: part of help text describing #h2, Do not use any shortcut +#: src/include/firewall/dialogs.rb:77 msgid "Disable Firewall Automatic Starting" msgstr "방화벽 자동 시작 사용 안 함" -#. TRANSLATORS: status information -#: src/include/firewall/dialogs.rb:85 +#. TRANSLATORS: status information +#: src/include/firewall/dialogs.rb:85 msgid "Firewall is running" msgstr "방화벽이 실행되고 있습니다." -#. TRANSLATORS: status information -#: src/include/firewall/dialogs.rb:89 +#. TRANSLATORS: status information +#: src/include/firewall/dialogs.rb:89 msgid "Firewall is not running" msgstr "방화벽이 실행되고 있지 않습니다." -#. TRANSLATORS: Push button -#: src/include/firewall/dialogs.rb:93 +#. TRANSLATORS: Push button +#: src/include/firewall/dialogs.rb:93 msgid "&Start Firewall Now" msgstr "방화벽 지금 시작(&S)" -#. TRANSLATORS: Push button -#: src/include/firewall/dialogs.rb:97 +#. TRANSLATORS: Push button +#: src/include/firewall/dialogs.rb:97 msgid "S&top Firewall Now" msgstr "방화벽 지금 중지(&T)" -#. TRANSLATORS: Push button -#: src/include/firewall/dialogs.rb:105 +#. TRANSLATORS: Push button +#: src/include/firewall/dialogs.rb:105 msgid "Sa&ve Settings and Restart Firewall Now" msgstr "지금 설정 저장 및 방화벽 재시작(&V)" -#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! -#: src/include/firewall/dialogs.rb:119 +#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! +#: src/include/firewall/dialogs.rb:119 msgid "Start Firewall Now" msgstr "방화벽 지금 시작" -#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! -#: src/include/firewall/dialogs.rb:121 +#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! +#: src/include/firewall/dialogs.rb:121 msgid "Stop Firewall Now" msgstr "방화벽 지금 중지" -#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! -#: src/include/firewall/dialogs.rb:123 +#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! +#: src/include/firewall/dialogs.rb:123 msgid "Save Settings and Restart Firewall Now" msgstr "지금 설정 저장 및 방화벽 재시작" -#. TRANSLATORS: Part of dialog caption -#: src/include/firewall/dialogs.rb:271 +#. TRANSLATORS: Part of dialog caption +#: src/include/firewall/dialogs.rb:271 msgid "Firewall Configuration" msgstr "방화벽 설정" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: tree menu item -#: src/include/firewall/dialogs.rb:286 src/include/firewall/dialogs.rb:289 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: tree menu item +#: src/include/firewall/dialogs.rb:286 src/include/firewall/dialogs.rb:289 msgid "Start-Up" msgstr "시작" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: tree menu item -#. TRANSLATORS: Summary item label -#. TRANSLATORS: Summary item label -#: src/include/firewall/dialogs.rb:302 src/include/firewall/dialogs.rb:305 -#: src/include/firewall/summary.rb:151 src/include/firewall/summary.rb:153 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: tree menu item +#. TRANSLATORS: Summary item label +#. TRANSLATORS: Summary item label +#: src/include/firewall/dialogs.rb:302 src/include/firewall/dialogs.rb:305 +#: src/include/firewall/summary.rb:151 src/include/firewall/summary.rb:153 msgid "Interfaces" msgstr "인터페이스" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: tree menu item -#: src/include/firewall/dialogs.rb:313 src/include/firewall/dialogs.rb:316 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: tree menu item +#: src/include/firewall/dialogs.rb:313 src/include/firewall/dialogs.rb:316 msgid "Allowed Services" msgstr "허용된 서비스" -#. TRANSLATORS: part of dialog caption -#: src/include/firewall/dialogs.rb:331 +#. TRANSLATORS: part of dialog caption +#: src/include/firewall/dialogs.rb:331 msgid "Network Masquerading" msgstr "네트워크 마스커레이딩" -#. TRANSLATORS: tree menu item -#. TRANSLATORS: frame label -#: src/include/firewall/dialogs.rb:334 src/include/firewall/subdialogs.rb:210 +#. TRANSLATORS: tree menu item +#. TRANSLATORS: frame label +#: src/include/firewall/dialogs.rb:334 src/include/firewall/subdialogs.rb:210 msgid "Masquerading" msgstr "머스커레이딩" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: tree menu item -#: src/include/firewall/dialogs.rb:351 src/include/firewall/dialogs.rb:354 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: tree menu item +#: src/include/firewall/dialogs.rb:351 src/include/firewall/dialogs.rb:354 msgid "Broadcast" msgstr "브로드캐스트" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: tree menu item -#: src/include/firewall/dialogs.rb:379 src/include/firewall/dialogs.rb:382 -#: src/include/firewall/subdialogs.rb:840 -#: src/modules/SuSEFirewallCMDLine.rb:740 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: tree menu item +#: src/include/firewall/dialogs.rb:379 src/include/firewall/dialogs.rb:382 +#: src/include/firewall/subdialogs.rb:840 +#: src/modules/SuSEFirewallCMDLine.rb:740 msgid "Logging Level" msgstr "로깅 레벨" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: tree menu item -#. Example: -#. All requests from network 80.44.11.0/24 to UDP port 53 originating on port 53 -#. $[ "network" : "80.44.11.0/24", "protocol" : "udp", "dport" : "53", "sport" : "53" ] -#. -#. Possible keys for parameters are "network", "protocol", "dport" and "sport". -#. Mandatory are "network" and "protocol". -#: src/include/firewall/dialogs.rb:390 src/include/firewall/dialogs.rb:393 -#: src/include/firewall/summary.rb:464 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: tree menu item +#. Example: +#. All requests from network 80.44.11.0/24 to UDP port 53 originating on port 53 +#. $[ "network" : "80.44.11.0/24", "protocol" : "udp", "dport" : "53", "sport" : "53" ] +#. +#. Possible keys for parameters are "network", "protocol", "dport" and "sport". +#. Mandatory are "network" and "protocol". +#: src/include/firewall/dialogs.rb:390 src/include/firewall/dialogs.rb:393 +#: src/include/firewall/summary.rb:464 msgid "Custom Rules" msgstr "사용자 정의 규칙" -#. TRANSLATORS: part of dialog caption -#: src/include/firewall/dialogs.rb:438 +#. TRANSLATORS: part of dialog caption +#: src/include/firewall/dialogs.rb:438 msgid "Summary" msgstr "요약" -#. TRANSLATORS: Read dialog help -#: src/include/firewall/helps.rb:42 +#. TRANSLATORS: Read dialog help +#: src/include/firewall/helps.rb:42 msgid "" "<p><b><big>Reading Firewall Configuration</big></b>\n" "<br>Please wait...</p>" @@ -215,8 +215,8 @@ "<p><b><big>방화벽 구성 읽는 중</big></b>\n" "<br>잠시 기다려 주십시오...</p>" -#. TRANSLATORS: Write dialog help -#: src/include/firewall/helps.rb:46 +#. TRANSLATORS: Write dialog help +#: src/include/firewall/helps.rb:46 msgid "" "<p><b><big>Saving Firewall Configuration</big></b>\n" "<br>Please wait...</p>" @@ -224,8 +224,8 @@ "<p><b><big>방화벽 구성을 저장중</big></b>\n" "<br>기다려주십시오...</p>" -#. TRANSLATORS: Firewall interfaces dialog help -#: src/include/firewall/helps.rb:50 +#. TRANSLATORS: Firewall interfaces dialog help +#: src/include/firewall/helps.rb:50 msgid "" "<p><b><big>Interfaces</big></b>\n" "<br>Here, assign your network devices into firewall zones\n" @@ -243,27 +243,25 @@ " 클릭하여 네트워크 장치를 방화벽 영역에 할당합니다.</p>\n" " \n" " <p><tt>any</tt>와 같은 특수 문자열을 입력하려면 \n" -" <b>사용자 정의</b>를 사용하십시오. 아직 구성하지 않은 인터페이스도 여기서 입" -"력할 수 있습니다.\n" -" 마스커레이딩이 필요한 경우에는 <tt>any</tt> 문자열을 사용할 수 없습니다.\n" +" <b>사용자 정의</b>를 사용하십시오. 아직 구성하지 않은 인터페이스도 여기서 입력할 수 있습니다.\n" +" 마스커레이딩이 필요한 경우에는 <tt>any</tt> 문자열을 사용할 수 없습니다.</p>\n" " \n" " <p>모든 네트워크 장치를 방화벽 영역에 할당해야 합니다.\n" " 할당되지 않은 인터페이스를 통한 네트워크 트래픽은 차단됩니다.</p>\n" -#. Network Manager -#. (NetworkService::IsManaged() ? -#. // TRANSLATORS: Optional help text for Firewall interfaces -#. // Used only when the network interfaces are handled by the Network Manager tool -#. // %1 is a string 'any' (by default) -#. // %2 is a zone name 'External Zone' (by default) -#. sformat(_("<p>You are currently using NetworkManager to control your -#. network interfaces. You should insert a string '%1' into the zone '%2' using -#. <b>Custom</b>. Otherwise your configuration might not work. -#. </p>"), SuSEFirewall::special_all_interface_string, SuSEFirewall::GetZoneFullName(SuSEFirewall::special_all_interface_zone)):"" -#. ), -#. TRANSLATORS: Allowed services dialog help 1/2 -#: src/include/firewall/helps.rb:75 +#. Network Manager +#. (NetworkService::IsManaged() ? +#. // TRANSLATORS: Optional help text for Firewall interfaces +#. // Used only when the network interfaces are handled by the Network Manager tool +#. // %1 is a string 'any' (by default) +#. // %2 is a zone name 'External Zone' (by default) +#. sformat(_("<p>You are currently using NetworkManager to control your +#. network interfaces. You should insert a string '%1' into the zone '%2' using +#. <b>Custom</b>. Otherwise your configuration might not work. +#. </p>"), SuSEFirewall::special_all_interface_string, SuSEFirewall::GetZoneFullName(SuSEFirewall::special_all_interface_zone)):"" +#. ), +#. TRANSLATORS: Allowed services dialog help 1/2 +#: src/include/firewall/helps.rb:75 msgid "" "<p><b><big>Allowed Services</big></b>\n" "<br>Specify services or ports that should be accessible from the network.\n" @@ -271,12 +269,10 @@ "\n" "<p>To allow a service, select the <b>Zone</b> and the\n" "<b>Service to Allow</b> then press <b>Add</b>.\n" -"To remove an allowed service, select the <b>Zone</b> and the <b>Allowed " -"Service</b> then press <b>Delete</b>.</p>\n" +"To remove an allowed service, select the <b>Zone</b> and the <b>Allowed Service</b> then press <b>Delete</b>.</p>\n" "\n" "<p>By deselecting <b>Protect Firewall from Internal Zone</b>, you remove\n" -"protection from the zone. All services and ports in your internal network " -"will\n" +"protection from the zone. All services and ports in your internal network will\n" "be unprotected.</p>\n" msgstr "" "<p><b><big>허용된 서비스</big></b>\n" @@ -285,136 +281,104 @@ "\n" "<p>서비스를 허용하려면 <b>영역</b> 및\n" "<b>허용할 서비스</b>를 선택하고 <b>추가</b>를 누르십시오.\n" -"허용된 서비스를 제거하려면 <b>영역</b> 및 <b>허용된 서비스</b>를 선택하고 <b>" -"삭제</b>를 누르십시오.</p>\n" +"허용된 서비스를 제거하려면 <b>영역</b> 및 <b>허용된 서비스</b>를 선택하고 <b>삭제</b>를 누르십시오.</p>\n" "\n" "<p><b>내부 영역에서 방화벽 보호</b>를 선택 취소하여\n" "영역에서 보호를 제거합니다. 내부 네트워크의 모든 서비스 및 포트가\n" "보호되지 않습니다.</p>\n" -#. TRANSLATORS: Allowed services dialog help 2/2 -#: src/include/firewall/helps.rb:89 +#. TRANSLATORS: Allowed services dialog help 2/2 +#: src/include/firewall/helps.rb:89 msgid "" "<p>Additional settings can be configured using <b>Advanced</b>.\n" -"Entries must be separated by a space. There you can allow TCP, UDP, and RPC " -"ports and\n" +"Entries must be separated by a space. There you can allow TCP, UDP, and RPC ports and\n" "IP protocols.</p>\n" "<p>TCP and UDP ports can be entered as port names (<tt>ftp-data</tt>),\n" "port numbers (<tt>3128</tt>), and port ranges (<tt>8000:8520</tt>).\n" -"RPC ports must be entered as service names (<tt>portmap</tt> or " -"<tt>nlockmgr</tt>).\n" +"RPC ports must be entered as service names (<tt>portmap</tt> or <tt>nlockmgr</tt>).\n" "Enter IP protocols as the protocol name (<tt>esp</tt>).\n" "</p>\n" msgstr "" "<p><b>고급</b>을 사용하면 추가로 설정을 구성할 수 있습니다.\n" -"항목은 공백으로 구분해야 합니다. 여기서는 TCP, UDP, RPC 포트 및 IP 프로토콜" -"을\n" +"항목은 공백으로 구분해야 합니다. 여기서는 TCP, UDP, RPC 포트 및 IP 프로토콜을\n" " 사용할 수 있습니다.</p>\n" -" <p>TCP 및 UDP 포트는 포트 이름(<tt>ftp-data</tt>), 포트 번호(<tt>3128)\n" +" <p>TCP 및 UDP 포트는 포트 이름(<tt>ftp-data</tt>), 포트 번호(<tt>3128</tt>)\n" " 및 포트 범위(<tt>8000:8520</tt>)로 입력할 수 있습니다.\n" -" RPC 포트는 서비스 이름(<tt>portmap</tt> 또는 <tt>nlockmgr</tt>)으로 입력해" -"야 합니다.\n" +" RPC 포트는 서비스 이름(<tt>portmap</tt> 또는 <tt>nlockmgr</tt>)으로 입력해야 합니다.\n" " IP 프로토콜은 프로토콜 이름(<tt>esp</tt>)으로 입력할 수 있습니다.\n" " </p>\n" -#. TRANSLATORS: Base masquerade dialog help -#: src/include/firewall/helps.rb:100 +#. TRANSLATORS: Base masquerade dialog help +#: src/include/firewall/helps.rb:100 msgid "" "<p><b><big>Masquerading</big></b>\n" -"<br>Masquerading is a function that hides your internal network behind your " -"firewall and allows\n" -"your internal network to access the external network, such as the Internet, " -"transparently. Requests\n" +"<br>Masquerading is a function that hides your internal network behind your firewall and allows\n" +"your internal network to access the external network, such as the Internet, transparently. Requests\n" "from the external network to the internal one are blocked.\n" "Select <b>Masquerade Networks</b> to masquerade your networks\n" "to the external network.</p>\n" msgstr "" "<p><b><big>마스커레이딩</big></b>\n" -"<br>마스커레이딩이란 내부 네트워크를 방화벽 뒤에 숨긴 채 내부 네트워크가 인터" -"넷과 같은\n" +"<br>마스커레이딩이란 내부 네트워크를 방화벽 뒤에 숨긴 채 내부 네트워크가 인터넷과 같은\n" " 외부 네트워크에 투명하게 액세스할 수 있도록 지원하는 기능입니다. \n" " 외부 네트워크에서 내부 네트워크로의 요청은 차단됩니다.\n" -" 외부 네트워크에 대해 네트워크를 마스커레이드하려면 <b>네트워크 마스커레이드" -"</b>를\n" +" 외부 네트워크에 대해 네트워크를 마스커레이드하려면 <b>네트워크 마스커레이드</b>를\n" " 선택합니다.</p>\n" -#. TRANSLATORS: Redirect-masquerade table dialog help -#: src/include/firewall/helps.rb:109 +#. TRANSLATORS: Redirect-masquerade table dialog help +#: src/include/firewall/helps.rb:109 msgid "" "<p>\n" -"Although requests from the external network cannot reach your internal " -"network, it is possible to\n" -"transparently redirect any requested ports on your firewall to any internal " -"IP. \n" -"To add a new redirect rule, press <b>Add</b> and complete the redirect form." -"</p>\n" +"Although requests from the external network cannot reach your internal network, it is possible to\n" +"transparently redirect any requested ports on your firewall to any internal IP. \n" +"To add a new redirect rule, press <b>Add</b> and complete the redirect form.</p>\n" "\n" -"<p>To removed any redirect rule, select it in the table and press <b>Delete.</p>\n" +"<p>To removed any redirect rule, select it in the table and press <b>Delete</b>.</p>\n" msgstr "" "<p>\n" -"외부 네트워크로부터의 요청이 내부 네트워크에 도달하지는 못하더라도, 방화벽" -"의\n" +"외부 네트워크로부터의 요청이 내부 네트워크에 도달하지는 못하더라도, 방화벽의\n" " 요청된 포트를 내부 IP 중 하나로 리디렉션할 수는 있습니다. \n" -"새 리디렉션 규칙을 추가하려면 <b>추가</b>를 누르고 리디렉션 양식을 작성합니" -"다.</p>\n" +"새 리디렉션 규칙을 추가하려면 <b>추가</b>를 누르고 리디렉션 양식을 작성합니다.</p>\n" "\n" -"<p>리디렉션 규칙을 제거하려면 테이블에서 해당 규칙을 선택하고 <b>삭제</b>를 " -"누릅니다.</p>\n" +"<p>리디렉션 규칙을 제거하려면 테이블에서 해당 규칙을 선택하고 <b>삭제</b>를 누릅니다.</p>\n" -#. TRANSLATORS: Simple broadcast configuration dialog help -#: src/include/firewall/helps.rb:118 +#. TRANSLATORS: Simple broadcast configuration dialog help +#: src/include/firewall/helps.rb:118 msgid "" "<p><b><big>Broadcast Configuration</big></b>\n" -"<br>Broadcast packets are special UDP packets sent to the whole network to " -"find \n" +"<br>Broadcast packets are special UDP packets sent to the whole network to find \n" "neighboring computers or send information to each computer in the network.\n" -"For example, CUPS servers provide information about their printing queues " -"using broadcast packets.</p>\n" +"For example, CUPS servers provide information about their printing queues using broadcast packets.</p>\n" "\n" -"<p>SuSEfirewall2 services selected in allowed interfaces automatically add " -"needed broadcast\n" -"ports here. To remove any or add any others, edit lists of space-separated " -"ports for\n" +"<p>SuSEfirewall2 services selected in allowed interfaces automatically add needed broadcast\n" +"ports here. To remove any or add any others, edit lists of space-separated ports for\n" "particular zones.</p>\n" "\n" -"<p>Other dropped broadcast packets are logged. It could be quite a lot of " -"packets in wider networks.\n" -"To suppress logging of these packets, deselect <b>Log Not Accepted Broadcast " -"Packets</b>\n" +"<p>Other dropped broadcast packets are logged. It could be quite a lot of packets in wider networks.\n" +"To suppress logging of these packets, deselect <b>Log Not Accepted Broadcast Packets</b>\n" "for the desired zones.</p>\n" msgstr "" "<p><b><big>브로드캐스트 구성</big></b>\n" "<br>브로드캐스트 패킷은 주변 컴퓨터를 찾거나 네트워크의 각 컴퓨터에\n" " 정보를 전송하기 위해 네트워크 전체로 전송되는 특수 UDP 패킷입니다.\n" -" 예를 들어 CUPS 서버는 브로드캐스트 패킷을 사용하여 인쇄 대기열에 대한 정보" -"를 제공합니다.</p>\n" +" 예를 들어 CUPS 서버는 브로드캐스트 패킷을 사용하여 인쇄 대기열에 대한 정보를 제공합니다.</p>\n" " \n" -" <p>허용된 인터페이스에서 선택한 SuSEfirewall2 서비스는 필요한 브로드캐스트 " -"포트를 여기서 \n" -" 자동으로 추가합니다. 다른 항목을 추가하거나 제거하려면 공백으로 구분된, 특" -"정 영역에 대한\n" +" <p>허용된 인터페이스에서 선택한 SuSEfirewall2 서비스는 필요한 브로드캐스트 포트를 여기서 \n" +" 자동으로 추가합니다. 다른 항목을 추가하거나 제거하려면 공백으로 구분된, 특정 영역에 대한\n" " 포트 목록을 편집할 수 있습니다.</p>\n" " \n" -" <p>다른 손실된 브로드캐스트 패킷은 로그에 기록됩니다. 규모가 큰 네트워크에" -"는 상당히 많은 패킷이 존재할 수 있습니다.\n" -" 이러한 패킷의 로깅을 억제하려면 원하는 영역에 대해 <b>허용되지 않은 브로드캐" -"스트 패킷 기록</b>을\n" +" <p>다른 손실된 브로드캐스트 패킷은 로그에 기록됩니다. 규모가 큰 네트워크에는 상당히 많은 패킷이 존재할 수 있습니다.\n" +" 이러한 패킷의 로깅을 억제하려면 원하는 영역에 대해 <b>허용되지 않은 브로드캐스트 패킷 기록</b>을\n" " 선택 취소합니다.</p>\n" -#: src/include/firewall/helps.rb:132 +#: src/include/firewall/helps.rb:132 msgid "" "<p><b><big>Broadcast Reply</big></b><br>\n" -"Firewall usually drops packets that are sent by another machines as their " -"reply\n" -"to broadcast packets sent by your system, e.g., Samba browsing or SLP " -"browsing.</p>\n" +"Firewall usually drops packets that are sent by another machines as their reply\n" +"to broadcast packets sent by your system, e.g., Samba browsing or SLP browsing.</p>\n" "\n" -"<p>Here you can configure which packets are allowed to pass through the " -"firewall. Use <b>Add</b>\n" -"button to add a new rule. You will have to choose the firewall zone and also " -"choose from\n" +"<p>Here you can configure which packets are allowed to pass through the firewall. Use <b>Add</b>\n" +"button to add a new rule. You will have to choose the firewall zone and also choose from\n" "some already defined services or set your rule completely manually.</p>\n" msgstr "" "<p><b><big>브로드캐스트 응답</big></b><br>\n" @@ -425,81 +389,63 @@ "버튼을 사용하여 새 규칙을 추가하십시오. 방화벽 영역을 선택하고 이미 정의된\n" "일부 서비스를 선택하거나 완전히 수동으로 규칙을 설정해야 합니다.</p>\n" -#. TRANSLATORS: Base IPsec configuration dialog help -#: src/include/firewall/helps.rb:142 +#. TRANSLATORS: Base IPsec configuration dialog help +#: src/include/firewall/helps.rb:142 msgid "" "<p><b><big>IPsec Support</big></b>\n" -"<br>IPsec is an encrypted communication between trusted hosts or networks " -"through untrusted networks, such as\n" +"<br>IPsec is an encrypted communication between trusted hosts or networks through untrusted networks, such as\n" "the Internet. This dialog opens IPsec for an external zone using\n" "<b>Enabled</b>.</p>\n" "\n" "<p><b>Details</b> configures how to handle successfully decrypted\n" -"IPsec packets. For example, they could be handled as if they were from the " -"internal zone.</p>\n" +"IPsec packets. For example, they could be handled as if they were from the internal zone.</p>\n" msgstr "" "<p><b><big>IPsec 지원</big></b>\n" -"<br>IPsec은 트러스트된 호스트 또는 인터넷과 같이 트러스트되지 않은 네트워크" -"를 통한 네트워크 간에 이루어지는\n" +"<br>IPsec은 트러스트된 호스트 또는 인터넷과 같이 트러스트되지 않은 네트워크를 통한 네트워크 간에 이루어지는\n" " 암호화된 통신입니다. 이 대화 상자에서 <b>활성화</b>를 사용하면 외부 영역에\n" " 대한 IPsec이 열립니다.</p>\n" " \n" " <p><b>세부 사항</b>에서는 성공적으로 암호 해독된 IPsec 패킷의 처리\n" -" 방법을 구성합니다. 예를 들어 이러한 패킷을 내부 영역에서 온 것처럼 처리할 " -"수 있습니다.</p>\n" +" 방법을 구성합니다. 예를 들어 이러한 패킷을 내부 영역에서 온 것처럼 처리할 수 있습니다.</p>\n" -#. TRANSLATORS: Base Logging configuration dialog help -#: src/include/firewall/helps.rb:152 +#. TRANSLATORS: Base Logging configuration dialog help +#: src/include/firewall/helps.rb:152 msgid "" "<p><b><big>Logging Level</big></b>\n" -"<br>This is a base configuration dialog for IP packet logging settings. " -"Here,\n" -"configure logging for incoming connection packets. Outgoing ones are not " -"logged at all.</p>\n" +"<br>This is a base configuration dialog for IP packet logging settings. Here,\n" +"configure logging for incoming connection packets. Outgoing ones are not logged at all.</p>\n" "\n" -"<p>There are two groups of logged IP packets: <b>Accepted Packets</b> and " -"<b>Not Accepted Packets</b>.\n" -"You can choose from three levels of logging for each group: <b>Log All</b> " -"for logging every\n" -"packet, <b>Log Only Critical</b> for logging only interesting ones, or <b>Do " -"Not Log Any</b>\n" +"<p>There are two groups of logged IP packets: <b>Accepted Packets</b> and <b>Not Accepted Packets</b>.\n" +"You can choose from three levels of logging for each group: <b>Log All</b> for logging every\n" +"packet, <b>Log Only Critical</b> for logging only interesting ones, or <b>Do Not Log Any</b>\n" "for no logging. You should log at least critical accepted packets.</p>\n" msgstr "" "<p><b><big>로깅 레벨</big></b>\n" "<br>이것은 IP 패킷 로깅 설정을 위한 기본 구성 대화 상자입니다. 여기서는\n" -" 들어오는 연결 패킷에 대한 로깅을 구성할 수 있습니다. 나가는 연결 패킷은 기록" -"되지 않습니다.</p>\n" +" 들어오는 연결 패킷에 대한 로깅을 구성할 수 있습니다. 나가는 연결 패킷은 기록되지 않습니다.</p>\n" " \n" -" <p>기록된 IP 패킷에는 두 그룹이 있습니다. <b>허용된 패킷</b>과 <b>허용되지 " -"않은 패킷</b>이 그것입니다.\n" -" 각 그룹에 대해 세 가지 로깅 레벨 중에서 선택할 수 있습니다. 모든 패킷을 기록" -"하려면 <b>모두 기록</b>을,\n" -" 관심이 있는 내용만 기록하려면 <b>중요한 내용만 기록</b>을, 기록하지 않으려" -"면 <b>기록하지 않음</b>을\n" +" <p>기록된 IP 패킷에는 두 그룹이 있습니다. <b>허용된 패킷</b>과 <b>허용되지 않은 패킷</b>이 그것입니다.\n" +" 각 그룹에 대해 세 가지 로깅 레벨 중에서 선택할 수 있습니다. 모든 패킷을 기록하려면 <b>모두 기록</b>을,\n" +" 관심이 있는 내용만 기록하려면 <b>중요한 내용만 기록</b>을, 기록하지 않으려면 <b>기록하지 않음</b>을\n" " 선택합니다. 최소한 중요하게 허용된 패킷은 기록해야 합니다.</p>\n" -#. TRANSLATORS: Base Summary dialog help -#: src/include/firewall/helps.rb:163 +#. TRANSLATORS: Base Summary dialog help +#: src/include/firewall/helps.rb:163 msgid "" "<p><b><big>Summary</big></b>\n" "<br>Here, find a summary of your configuration settings.\n" -"This summary is divided into general configuration and parts for each " -"firewall zone.\n" +"This summary is divided into general configuration and parts for each firewall zone.\n" "Every existing zone is summarized here.</p>\n" "\n" "<p><b>Firewall Starting</b> shows whether the firewall is started in the\n" "<b>boot process</b> or only <b>manually</b>.</p>\n" "\n" -"<p>Firewall zones must have a network interface assigned to list the " -"following items in the summary:</p>\n" +"<p>Firewall zones must have a network interface assigned to list the following items in the summary:</p>\n" "\n" -"<p><b>Interfaces</b>: All interfaces are listed using their configuration " -"name and device name.</p>\n" +"<p><b>Interfaces</b>: All interfaces are listed using their configuration name and device name.</p>\n" "\n" -"<p><b>Open Services, Ports, and Protocols</b>: This lists all allowed " -"network services, additional\n" -"TCP (Transmission Control Protocol), UDP (User Datagram Protocol), and RPC " -"(Remote Procedure Call)\n" +"<p><b>Open Services, Ports, and Protocols</b>: This lists all allowed network services, additional\n" +"TCP (Transmission Control Protocol), UDP (User Datagram Protocol), and RPC (Remote Procedure Call)\n" "ports, and IP (Internet Protocol) protocols.</p>\n" msgstr "" "<p><b><big>요약</big></b>\n" @@ -510,20 +456,16 @@ " <p><b>방화벽 시작</b>은 방화벽이 <b>부팅 과정</b> 중에 시작되는지 또는\n" " <b>수동</b>으로만 시작되는지를 보여줍니다.</p>\n" " \n" -" <p>방화벽 영역에 네트워크 인터페이스가 할당되어 있어야 요약에 다음 항목이 열" -"거됩니다.</p>\n" +" <p>방화벽 영역에 네트워크 인터페이스가 할당되어 있어야 요약에 다음 항목이 열거됩니다.</p>\n" " \n" -" <p><b>인터페이스</b>: 모든 인터페이스는 해당 구성 이름 및 장치 이름을 사용하" -"여 열거됩니다.</p>\n" +" <p><b>인터페이스</b>: 모든 인터페이스는 해당 구성 이름 및 장치 이름을 사용하여 열거됩니다.</p>\n" " \n" -" <p><b>기타 서비스, 포트 및 프로토콜</b>: 여기에는 모든 허용된 네트워크 서비" -"스,\n" -" TCP(Transmission Control Protocol), UDP(User Datagram Protocol), RPC(Remote " -"Procedure Call)\n" +" <p><b>기타 서비스, 포트 및 프로토콜</b>: 여기에는 모든 허용된 네트워크 서비스,\n" +" TCP(Transmission Control Protocol), UDP(User Datagram Protocol), RPC(Remote Procedure Call)\n" " 포트 및 IP(Internet Protocol) 프로토콜이 열거됩니다.</p>\n" -#. TRANSLATORS: Additional Services dialog help 1/6 -#: src/include/firewall/helps.rb:181 +#. TRANSLATORS: Additional Services dialog help 1/6 +#: src/include/firewall/helps.rb:181 msgid "" "<p>Here, enter additional\n" "ports or protocols to enable in the firewall zone.</p>" @@ -531,32 +473,30 @@ "<p>방화벽 영역에서\n" "활성화할 추가 포트나 프로토콜을 입력하십시오.</p>" -#. TRANSLATORS: Additional Services dialog help 2/6 -#. please, do not modify examples -#: src/include/firewall/helps.rb:186 +#. TRANSLATORS: Additional Services dialog help 2/6 +#. please, do not modify examples +#: src/include/firewall/helps.rb:186 msgid "" "<p><b>TCP Ports</b> and <b>UDP Ports</b> can be entered as\n" "a list of port numbers, port names, or port ranges separated by spaces,\n" "such as <tt>22</tt>, <tt>http</tt>, or <tt>137:139</tt>.</p>" msgstr "" -"<p><b>TCP 포트</b> 및 <b>UDP 포트</b>는 공백으로 구분된 포트 번호, 포트 이름 " -"또는 포트 범위 목록으로 입력할 수 있습니다(예: \n" +"<p><b>TCP 포트</b> 및 <b>UDP 포트</b>는 공백으로 구분된 포트 번호, 포트 이름 또는 포트 범위 목록으로 입력할 수 있습니다(예: \n" "<tt>22</tt>, <tt>http</tt> 또는 <tt>137:139</tt>).</p>" -#. TRANSLATORS: Additional Services dialog help 3/6 -#. please, do not modify examples -#: src/include/firewall/helps.rb:193 +#. TRANSLATORS: Additional Services dialog help 3/6 +#. please, do not modify examples +#: src/include/firewall/helps.rb:193 msgid "" "<p><b>RPC Ports</b> is a list of RPC services, such as\n" -"<tt>nlockmgr</tt>, <tt>ypbind</tt>, or <tt>portmap</tt>, separated by spaces." -"</p>" +"<tt>nlockmgr</tt>, <tt>ypbind</tt>, or <tt>portmap</tt>, separated by spaces.</p>" msgstr "" "<p><b>RPC 포트</b>는 공백으로 구분된 RPC 서비스 목록(예: \n" "<tt>nlockmgr</tt>, <tt>ypbind</tt> 또는 <tt>portmap</tt>)입니다.</p>" -#. TRANSLATORS: Additional Services dialog help 4/6 -#. please, do not modify examples -#: src/include/firewall/helps.rb:198 +#. TRANSLATORS: Additional Services dialog help 4/6 +#. please, do not modify examples +#: src/include/firewall/helps.rb:198 msgid "" "<p><b>IP Protocols</b> is a list of protocols, such as\n" "<tt>esp</tt>, <tt>smp</tt>, or <tt>chaos</tt>, separated by spaces.\n" @@ -568,12 +508,11 @@ "Http://www.iana.org/assignments/protocol-numbers에서\n" "현재 프로토콜 목록을 찾아보십시오.</p>" -#. TRANSLATORS: Additional Services dialog help 5/6 -#. please, do not modify examples -#: src/include/firewall/helps.rb:206 +#. TRANSLATORS: Additional Services dialog help 5/6 +#. please, do not modify examples +#: src/include/firewall/helps.rb:206 msgid "" -"<p>The <b>Port Range</b> consists of two colon-separated numbers that " -"represent\n" +"<p>The <b>Port Range</b> consists of two colon-separated numbers that represent\n" "all numbers inside the range including the numbers themselves.\n" "The first port number must be lower than the second one,\n" "for example, <tt>200:215</tt>.</p>" @@ -583,8 +522,8 @@ "첫 번째 포트 번호는 두 번째 포트 번호보다 작아야 합니다.\n" "예를 들어 <tt>200:215</tt>입니다.</p>" -#. TRANSLATORS: Additional Services dialog help 6/6 -#: src/include/firewall/helps.rb:213 +#. TRANSLATORS: Additional Services dialog help 6/6 +#: src/include/firewall/helps.rb:213 msgid "" "<p>The <b>Port Name</b> is a name assigned to a port number by the IANA\n" "organization. One port number can have multiple port names assigned. Find\n" @@ -594,18 +533,17 @@ "이름입니다. 하나의 포트 번호에 여러 포트 이름이 할당될 수 있습니다.\n" "<tt>/etc/services</tt> 파일에서 현재 사용 중인 할당을 찾으십시오.</p>" -#. TRANSLATORS: help for Installation Proposal Dialog -#: src/include/firewall/helps.rb:219 +#. TRANSLATORS: help for Installation Proposal Dialog +#: src/include/firewall/helps.rb:219 msgid "" "<p><b><big>Firewall</big></b><br />\n" -"A firewall is a defensive mechanism that protects your computer from network " -"attacks.</p>\n" +"A firewall is a defensive mechanism that protects your computer from network attacks.</p>\n" msgstr "" "<p><b><big>방화벽</big></b><br />\n" "방화벽은 네트워크 공격으로부터 컴퓨터를 보호하는 방어 메커니즘입니다.</p>\n" -#. TRANSLATORS: general help for Custom Rules 1/5 -#: src/include/firewall/helps.rb:223 +#. TRANSLATORS: general help for Custom Rules 1/5 +#: src/include/firewall/helps.rb:223 msgid "" "<p><b><big>Custom Rules</big></b><br>\n" "Set special firewall rules that allow new connections\n" @@ -615,9 +553,9 @@ "이러한 규칙과 일치하는 새 연결을 허용하는\n" "특수 방화벽 규칙을 설정합니다.</p>\n" -#. TRANSLATORS: general help for Custom Rules 2/5 -#. TRANSLATORS: help for Custom Rules - Adding new rule 1/4 -#: src/include/firewall/helps.rb:229 src/include/firewall/helps.rb:256 +#. TRANSLATORS: general help for Custom Rules 2/5 +#. TRANSLATORS: help for Custom Rules - Adding new rule 1/4 +#: src/include/firewall/helps.rb:229 src/include/firewall/helps.rb:256 msgid "" "<p><b>Source Network</b><br>\n" "Network or IP address where the connection comes from,\n" @@ -629,9 +567,9 @@ "<tt>192.168.0.1</tt> 또는 <tt>192.168.0.0/255.255.255.0</tt>\n" "또는 <tt>192.168.0.0/24</tt> 또는 <tt>0/0</tt>(<tt>all</tt>에 해당).</p>\n" -#. TRANSLATORS: general help for Custom Rules 3/5 -#. TRANSLATORS: help for Custom Rules - Adding new rule 2/4 -#: src/include/firewall/helps.rb:236 src/include/firewall/helps.rb:263 +#. TRANSLATORS: general help for Custom Rules 3/5 +#. TRANSLATORS: help for Custom Rules - Adding new rule 2/4 +#: src/include/firewall/helps.rb:236 src/include/firewall/helps.rb:263 msgid "" "<p><b>Protocol</b><br>\n" "Protocol used by that packet. Special protocol <tt>RPC</tt> is used for\n" @@ -641,9 +579,9 @@ "패킷으로 사용되는 프로토콜입니다. 특수 프로토콜 <tt>RPC</tt>는 \n" "RPC 서비스에 사용됩니다.</p>" -#. TRANSLATORS: general help for Custom Rules 4/5 -#. TRANSLATORS: help for Custom Rules - Adding new rule 3/4 -#: src/include/firewall/helps.rb:242 src/include/firewall/helps.rb:269 +#. TRANSLATORS: general help for Custom Rules 4/5 +#. TRANSLATORS: help for Custom Rules - Adding new rule 3/4 +#: src/include/firewall/helps.rb:242 src/include/firewall/helps.rb:269 msgid "" "<p><b>Destination Port</b><br>\n" "Port name, port number or range of ports that are allowed to be\n" @@ -657,9 +595,9 @@ "<tt>RPC</tt> 프로토콜의 경우 RPC 서비스 이름을 사용합니다.\n" "이 항목은 선택 사항입니다.</p>" -#. TRANSLATORS: general help for Custom Rules 5/5 -#. TRANSLATORS: help for Custom Rules - Adding new rule 4/4 -#: src/include/firewall/helps.rb:250 src/include/firewall/helps.rb:277 +#. TRANSLATORS: general help for Custom Rules 5/5 +#. TRANSLATORS: help for Custom Rules - Adding new rule 4/4 +#: src/include/firewall/helps.rb:250 src/include/firewall/helps.rb:277 msgid "" "<p><b>Source Port</b><br>\n" "Port name, port number or range of ports where the packet\n" @@ -669,651 +607,646 @@ "패킷이 시작되는 포트 이름, 포트 번호 또는 포트 범위입니다.\n" "이 항목은 선택 사항입니다.</p>" -#: src/include/firewall/helps.rb:289 +#: src/include/firewall/helps.rb:289 msgid "FIXME: Help for '%1' is missing!" msgstr "FIXME: '%1' 도움말이 없습니다!" -#. TRANSLATORS: Frame label -#: src/include/firewall/subdialogs.rb:87 +#. TRANSLATORS: Frame label +#: src/include/firewall/subdialogs.rb:87 msgid "Firewall Interfaces" msgstr "방화벽 인터페이스" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:95 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:95 msgid "Device" msgstr "장치" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:97 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:97 msgid "Interface or String" msgstr "인터페이스 또는 문자열" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:99 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:99 msgid "Configured In" msgstr "구성됨" -#. TRANSLATORS: push button -#: src/include/firewall/subdialogs.rb:108 +#. TRANSLATORS: push button +#: src/include/firewall/subdialogs.rb:108 msgid "&Change..." msgstr "변경(&C)..." -#. TRANSLATORS: push button -#: src/include/firewall/subdialogs.rb:114 +#. TRANSLATORS: push button +#: src/include/firewall/subdialogs.rb:114 msgid "C&ustom..." msgstr "사용자 정의(&U)..." -#. TRANSLATORS: frame label -#: src/include/firewall/subdialogs.rb:128 +#. TRANSLATORS: frame label +#: src/include/firewall/subdialogs.rb:128 msgid "Zone for Network Interface" msgstr "네트워크 인터페이스에 대한 영역" -#. TRANSLATORS: select box -#: src/include/firewall/subdialogs.rb:140 +#. TRANSLATORS: select box +#: src/include/firewall/subdialogs.rb:140 msgid "&Interface Zone" msgstr "인터페이스 영역(&I)" -#. TRANSLATORS: frame label -#: src/include/firewall/subdialogs.rb:182 +#. TRANSLATORS: frame label +#: src/include/firewall/subdialogs.rb:182 msgid "Additional Interface Settings for Zones" msgstr "영역에 대한 추가 인터페이스 설정" -#. TRANSLATORS: check box -#: src/include/firewall/subdialogs.rb:224 +#. TRANSLATORS: check box +#: src/include/firewall/subdialogs.rb:224 msgid "&Masquerade Networks" msgstr "네트워크 마스커레이드(&M)" -#. TRANSLATORS: combo box -#: src/include/firewall/subdialogs.rb:267 +#. TRANSLATORS: combo box +#: src/include/firewall/subdialogs.rb:267 msgid "All&owed Services for Selected Zone" msgstr "선택한 영역에 서비스 허용(&O)" -#. items handled by replacepoint -#. TRANSLATORS: combo box -#. TRANSLATORS: select box -#: src/include/firewall/subdialogs.rb:280 -#: src/include/firewall/uifunctions.rb:865 +#. items handled by replacepoint +#. TRANSLATORS: combo box +#. TRANSLATORS: select box +#: src/include/firewall/subdialogs.rb:280 +#: src/include/firewall/uifunctions.rb:865 msgid "&Service to Allow" msgstr "허용할 서비스(&S)" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:288 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:288 msgid "Allowed Service" msgstr "허용된 서비스" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:290 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:290 msgid "Description" msgstr "설명" -#. TRANSLATORS: check box -#: src/include/firewall/subdialogs.rb:300 +#. TRANSLATORS: check box +#: src/include/firewall/subdialogs.rb:300 msgid "&Protect Firewall from Internal Zone" msgstr "내부 영역에서 방화벽 보호(&P)" -#. TRANSLATORS: push button -#: src/include/firewall/subdialogs.rb:322 +#. TRANSLATORS: push button +#: src/include/firewall/subdialogs.rb:322 msgid "A&dvanced..." msgstr "고급(&D)..." -#. TRANSLATORS: combo box -#: src/include/firewall/subdialogs.rb:339 +#. TRANSLATORS: combo box +#: src/include/firewall/subdialogs.rb:339 msgid "Expert Rules Services for Selected Zone" msgstr "선택한 영역에 대한 고급 규칙 서비스" -#. TRANSLATORS: table header item -#. TRANSLATORS: table header item -#. TRANSLATORS: CommandLine table header item -#: src/include/firewall/subdialogs.rb:349 -#: src/include/firewall/subdialogs.rb:509 -#: src/include/firewall/subdialogs.rb:1056 -#: src/modules/SuSEFirewallCMDLine.rb:1418 +#. TRANSLATORS: table header item +#. TRANSLATORS: table header item +#. TRANSLATORS: CommandLine table header item +#: src/include/firewall/subdialogs.rb:349 +#: src/include/firewall/subdialogs.rb:509 +#: src/include/firewall/subdialogs.rb:1056 +#: src/modules/SuSEFirewallCMDLine.rb:1418 msgid "Source Network" msgstr "소스 네트워크" -#. TRANSLATORS: table header item -#. TRANSLATORS: table header item -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#: src/include/firewall/subdialogs.rb:351 -#: src/include/firewall/subdialogs.rb:511 -#: src/include/firewall/subdialogs.rb:1057 -#: src/modules/SuSEFirewallCMDLine.rb:1144 -#: src/modules/SuSEFirewallCMDLine.rb:1420 +#. TRANSLATORS: table header item +#. TRANSLATORS: table header item +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#: src/include/firewall/subdialogs.rb:351 +#: src/include/firewall/subdialogs.rb:511 +#: src/include/firewall/subdialogs.rb:1057 +#: src/modules/SuSEFirewallCMDLine.rb:1144 +#: src/modules/SuSEFirewallCMDLine.rb:1420 msgid "Protocol" msgstr "프로토콜" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:353 -#: src/include/firewall/subdialogs.rb:1058 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:353 +#: src/include/firewall/subdialogs.rb:1058 msgid "Destination Port" msgstr "대상 포트" -#. TRANSLATORS: table header item -#: src/include/firewall/subdialogs.rb:355 -#: src/include/firewall/subdialogs.rb:1059 +#. TRANSLATORS: table header item +#: src/include/firewall/subdialogs.rb:355 +#: src/include/firewall/subdialogs.rb:1059 msgid "Source Port" msgstr "원본 포트" -#. TRANSLATORS: frame label -#: src/include/firewall/subdialogs.rb:386 +#. TRANSLATORS: frame label +#: src/include/firewall/subdialogs.rb:386 msgid "Additional Allowed Ports" msgstr "추가로 허용된 포트" -#. TRANSLATORS: label, %1 is a zone name like "External Zone" -#: src/include/firewall/subdialogs.rb:392 +#. TRANSLATORS: label, %1 is a zone name like "External Zone" +#: src/include/firewall/subdialogs.rb:392 msgid "Settings for Zone: %1" msgstr "영역에 대한 설정: %1" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:395 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:395 msgid "&TCP Ports" msgstr "TCP 포트(&T)" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:397 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:397 msgid "&UDP Ports" msgstr "UDP 포트(&U)" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:399 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:399 msgid "&RPC Ports" msgstr "RPC 포트(&R)" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:404 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:404 msgid "&IP Protocols" msgstr "IP 프로토콜(&I)" -#. TRANSLATORS: frame label -#: src/include/firewall/subdialogs.rb:503 +#. TRANSLATORS: frame label +#: src/include/firewall/subdialogs.rb:503 msgid "Redirect Requests to Masqueraded IP" msgstr "마스커레이드된 IP로 리디렉션 요청" -#. TRANSLATORS: table header item, Req. == Requested -#. TRANSLATORS: CommandLine table header item, Req.=Requested -#: src/include/firewall/subdialogs.rb:513 -#: src/modules/SuSEFirewallCMDLine.rb:1422 +#. TRANSLATORS: table header item, Req. == Requested +#. TRANSLATORS: CommandLine table header item, Req.=Requested +#: src/include/firewall/subdialogs.rb:513 +#: src/modules/SuSEFirewallCMDLine.rb:1422 msgid "Req. IP" msgstr "필수 IP" -#. TRANSLATORS: table header item, Req. == Requested -#. TRANSLATORS: CommandLine table header item, Req.=Requested -#: src/include/firewall/subdialogs.rb:515 -#: src/modules/SuSEFirewallCMDLine.rb:1424 +#. TRANSLATORS: table header item, Req. == Requested +#. TRANSLATORS: CommandLine table header item, Req.=Requested +#: src/include/firewall/subdialogs.rb:515 +#: src/modules/SuSEFirewallCMDLine.rb:1424 msgid "Req. Port" msgstr "필수 포트" -#. TRANSLATORS: table header item, Redir. == Redirect -#. TRANSLATORS: CommandLine table header item, Redir.=Redirect -#: src/include/firewall/subdialogs.rb:518 -#: src/modules/SuSEFirewallCMDLine.rb:1426 +#. TRANSLATORS: table header item, Redir. == Redirect +#. TRANSLATORS: CommandLine table header item, Redir.=Redirect +#: src/include/firewall/subdialogs.rb:518 +#: src/modules/SuSEFirewallCMDLine.rb:1426 msgid "Redir. to IP" msgstr "IP로 리디렉션" -#. TRANSLATORS: table header item, Redir. == Redirect -#. TRANSLATORS: CommandLine table header item, Redir.=Redirect -#: src/include/firewall/subdialogs.rb:520 -#: src/modules/SuSEFirewallCMDLine.rb:1428 +#. TRANSLATORS: table header item, Redir. == Redirect +#. TRANSLATORS: CommandLine table header item, Redir.=Redirect +#: src/include/firewall/subdialogs.rb:520 +#: src/modules/SuSEFirewallCMDLine.rb:1428 msgid "Redir. to Port" msgstr "포트로 리디렉션" -#. TRANSLATORS: frame label -#: src/include/firewall/subdialogs.rb:546 +#. TRANSLATORS: frame label +#: src/include/firewall/subdialogs.rb:546 msgid "Add Masqueraded Redirect Rule" msgstr "마스커레이드된 리디렉션 규칙 추가" -#. TRANSLATORS: section title in popup window -#: src/include/firewall/subdialogs.rb:550 +#. TRANSLATORS: section title in popup window +#: src/include/firewall/subdialogs.rb:550 msgid "Redirect Matching Rule:" msgstr "리디렉션 일치 규칙:" -#. TRANSLATORS: editable select box -#: src/include/firewall/subdialogs.rb:557 +#. TRANSLATORS: editable select box +#: src/include/firewall/subdialogs.rb:557 msgid "&Source Network" msgstr "소스 네트워크(&S)" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:564 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:564 msgid "Re&quested IP (Optional)" msgstr "요청된 IP(선택 사항)(&Q)" -#. TRANSLATORS: select box -#: src/include/firewall/subdialogs.rb:573 -#: src/include/firewall/subdialogs.rb:1092 -#: src/include/firewall/uifunctions.rb:1980 +#. TRANSLATORS: select box +#: src/include/firewall/subdialogs.rb:573 +#: src/include/firewall/subdialogs.rb:1092 +#: src/include/firewall/uifunctions.rb:1980 msgid "&Protocol" msgstr "프로토콜(&P)" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:580 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:580 msgid "R&equested Port" msgstr "요청된 포트(&E)" -#. TRANSLATORS: section title in popup window -#: src/include/firewall/subdialogs.rb:586 +#. TRANSLATORS: section title in popup window +#: src/include/firewall/subdialogs.rb:586 msgid "Redirection:" msgstr "리디렉션:" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:592 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:592 msgid "Re&direct to Masqueraded IP" msgstr "마스커레이드된 IP로 리디렉션(&D)" -#. TRANSLATORS: text entry -#: src/include/firewall/subdialogs.rb:599 +#. TRANSLATORS: text entry +#: src/include/firewall/subdialogs.rb:599 msgid "&Redirect to Port (Optional)" msgstr "포트로 리디렉션(선택 사항)(&R)" -#. TRANSLATORS: select box item -#: src/include/firewall/subdialogs.rb:831 +#. TRANSLATORS: select box item +#: src/include/firewall/subdialogs.rb:831 msgid "Log All" msgstr "모두 기록" -#. TRANSLATORS: select box item -#: src/include/firewall/subdialogs.rb:833 +#. TRANSLATORS: select box item +#: src/include/firewall/subdialogs.rb:833 msgid "Log Only Critical" msgstr "중요한 내용만 기록" -#. TRANSLATORS: select box item -#: src/include/firewall/subdialogs.rb:835 +#. TRANSLATORS: select box item +#: src/include/firewall/subdialogs.rb:835 msgid "Do Not Log Any" msgstr "기록하지 않음" -#. TRANSLATORS: select box -#: src/include/firewall/subdialogs.rb:846 +#. TRANSLATORS: select box +#: src/include/firewall/subdialogs.rb:846 msgid "&Logging Accepted Packets" msgstr "허용된 패킷 로깅(&L)" -#. TRANSLATORS: select box -#: src/include/firewall/subdialogs.rb:854 +#. TRANSLATORS: select box +#: src/include/firewall/subdialogs.rb:854 msgid "L&ogging Not Accepted Packets" msgstr "허용되지 않은 패킷 로깅(&O)" -#. Only for Expert configuration -#. -#. term BroadcastConfigurationExpert () { -#. term dialog = `Frame ( -#. _("Broadcast Configuration"), -#. `VBox ( -#. `RadioButtonGroup (`id("broadcast_configuration"), -#. `VBox ( -#. `Left ( `RadioButton (`id("drop_incoming"), _("Drop Incoming Broadcast")) ), -#. `Left( `RadioButton (`id("allow_incoming"), _("Allow Incoming Broadcast")) ) -#. ) -#. ), -#. `HBox ( -#. `HWeight( 4, -#. `Empty() -#. ), -#. `HWeight( 50, -#. `MultiSelectionBox (`id("accept_broadcast_packets"), -#. _("Firewall Zones Allowing Broadcast Packets"), -#. GetZonesListedItems() -#. ) -#. ) -#. ), -#. `Left ( -#. `CheckBox (`id("dropped_packets"), _("Log Not Accepted Broadcast Packets")) -#. ) -#. ) -#. ); -#. -#. return dialog; -#. } -#: src/include/firewall/subdialogs.rb:899 +#. Only for Expert configuration +#. +#. term BroadcastConfigurationExpert () { +#. term dialog = `Frame ( +#. _("Broadcast Configuration"), +#. `VBox ( +#. `RadioButtonGroup (`id("broadcast_configuration"), +#. `VBox ( +#. `Left ( `RadioButton (`id("drop_incoming"), _("Drop Incoming Broadcast")) ), +#. `Left( `RadioButton (`id("allow_incoming"), _("Allow Incoming Broadcast")) ) +#. ) +#. ), +#. `HBox ( +#. `HWeight( 4, +#. `Empty() +#. ), +#. `HWeight( 50, +#. `MultiSelectionBox (`id("accept_broadcast_packets"), +#. _("Firewall Zones Allowing Broadcast Packets"), +#. GetZonesListedItems() +#. ) +#. ) +#. ), +#. `Left ( +#. `CheckBox (`id("dropped_packets"), _("Log Not Accepted Broadcast Packets")) +#. ) +#. ) +#. ); +#. +#. return dialog; +#. } +#: src/include/firewall/subdialogs.rb:899 msgid "Broadcast Configuration" msgstr "브로드캐스트 구성" -#: src/include/firewall/subdialogs.rb:908 +#: src/include/firewall/subdialogs.rb:908 msgid "Accepting the Broadcast Reply" msgstr "브로드캐스트 응답 수신 중" -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#: src/include/firewall/subdialogs.rb:911 -#: src/modules/SuSEFirewallCMDLine.rb:614 -#: src/modules/SuSEFirewallCMDLine.rb:1097 -#: src/modules/SuSEFirewallCMDLine.rb:1142 -#: src/modules/SuSEFirewallCMDLine.rb:1189 +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#: src/include/firewall/subdialogs.rb:911 +#: src/modules/SuSEFirewallCMDLine.rb:614 +#: src/modules/SuSEFirewallCMDLine.rb:1097 +#: src/modules/SuSEFirewallCMDLine.rb:1142 +#: src/modules/SuSEFirewallCMDLine.rb:1189 msgid "Zone" msgstr "영역" -#: src/include/firewall/subdialogs.rb:911 +#: src/include/firewall/subdialogs.rb:911 msgid "Service" msgstr "서비스" -#: src/include/firewall/subdialogs.rb:911 +#: src/include/firewall/subdialogs.rb:911 msgid "Accepted from Network" msgstr "네트워크에서 수신됨" -#: src/include/firewall/subdialogs.rb:916 +#: src/include/firewall/subdialogs.rb:916 msgid "&Add..." msgstr "추가(&A)..." -#: src/include/firewall/subdialogs.rb:917 +#: src/include/firewall/subdialogs.rb:917 msgid "&Delete" msgstr "삭제(&D)" -#. Only for Expert configuration -#. -#. term HierarchicalTokenBucket () { -#. term dialog = `Frame ( -#. _("Hierarchical Token Bucket"), -#. `VBox ( -#. `Left ( `Label (_("Adjust upstream limit for selected interface")) ), -#. `HBox ( -#. `HWeight ( 3, -#. `ComboBox (`id("htb_interface"), _("Interface"), [ -#. // FIXME: fake items -#. `item(`id(1), "RTL-8139 / eth-aa-bb-cc-dd-ee"), -#. `item(`id(1), "Askey 815C / modem0") -#. ]) -#. ), -#. `HWeight ( 1, -#. `InputField (`id("htb_unit"), `opt(`hsquash), _("kbit/sec.")) -#. ) -#. ) -#. ) -#. ); -#. -#. return dialog; -#. } -#. Only for Expert configuration -#. -#. term AdvancedSecuritySettings () { -#. term dialog = `Frame ( -#. _("Advanced Security Settings"), -#. `VBox ( -#. `Left( `ComboBox (`id("disallowed_packets"), _("Disallowed Packets"), [ -#. `item(`id("drop"), _("Drop")), -#. `item(`id("drop"), _("Reject")) -#. ])), -#. `Left ( `CheckBox (`id("block_new_connections"), _("Block New Connections from This Host")) ), -#. `Left ( `CheckBox (`id("allow_ping"), _("Allow to Ping This Host")) ), -#. `Left ( `CheckBox (`id("allow_traceroute"), _("Allow Traceroute through This Host")) ) -#. ) -#. ); -#. -#. return dialog; -#. } -#: src/include/firewall/subdialogs.rb:971 +#. Only for Expert configuration +#. +#. term HierarchicalTokenBucket () { +#. term dialog = `Frame ( +#. _("Hierarchical Token Bucket"), +#. `VBox ( +#. `Left ( `Label (_("Adjust upstream limit for selected interface")) ), +#. `HBox ( +#. `HWeight ( 3, +#. `ComboBox (`id("htb_interface"), _("Interface"), [ +#. // FIXME: fake items +#. `item(`id(1), "RTL-8139 / eth-aa-bb-cc-dd-ee"), +#. `item(`id(1), "Askey 815C / modem0") +#. ]) +#. ), +#. `HWeight ( 1, +#. `InputField (`id("htb_unit"), `opt(`hsquash), _("kbit/sec.")) +#. ) +#. ) +#. ) +#. ); +#. +#. return dialog; +#. } +#. Only for Expert configuration +#. +#. term AdvancedSecuritySettings () { +#. term dialog = `Frame ( +#. _("Advanced Security Settings"), +#. `VBox ( +#. `Left( `ComboBox (`id("disallowed_packets"), _("Disallowed Packets"), [ +#. `item(`id("drop"), _("Drop")), +#. `item(`id("drop"), _("Reject")) +#. ])), +#. `Left ( `CheckBox (`id("block_new_connections"), _("Block New Connections from This Host")) ), +#. `Left ( `CheckBox (`id("allow_ping"), _("Allow to Ping This Host")) ), +#. `Left ( `CheckBox (`id("allow_traceroute"), _("Allow Traceroute through This Host")) ) +#. ) +#. ); +#. +#. return dialog; +#. } +#: src/include/firewall/subdialogs.rb:971 msgid "IPsec Support" msgstr "IPsec 지원" -#. TRANSLATORS: check box -#: src/include/firewall/subdialogs.rb:974 +#. TRANSLATORS: check box +#: src/include/firewall/subdialogs.rb:974 msgid "&Enabled" msgstr "활성화(&E)" -#. TRANSLATORS: push button -#: src/include/firewall/subdialogs.rb:977 +#. TRANSLATORS: push button +#: src/include/firewall/subdialogs.rb:977 msgid "&Details..." msgstr "세부 사항(&D)..." -#. TRANSLATORS: select box item, trust IPsec packet the same as the origin of the packet -#: src/include/firewall/subdialogs.rb:990 +#. TRANSLATORS: select box item, trust IPsec packet the same as the origin of the packet +#: src/include/firewall/subdialogs.rb:990 msgid "Same Zone as Original Source Network" msgstr "원래 소스 네트워크와 같은 영역" -#. TRANSLATORS: frame label -#: src/include/firewall/subdialogs.rb:996 +#. TRANSLATORS: frame label +#: src/include/firewall/subdialogs.rb:996 msgid "IPsec Zone" msgstr "IPsec 영역" -#. TRANSLATORS: select box -#: src/include/firewall/subdialogs.rb:1003 +#. TRANSLATORS: select box +#: src/include/firewall/subdialogs.rb:1003 msgid "&Trust IPsec As" msgstr "IPsec 트러스트(&T)" -#. Only for Expert configuration -#. -#. term IPv6Support () { -#. term dialog = `Frame ( -#. _("IPv6 Support"), -#. `VBox ( -#. `Label ("H I C S U N T L E O N E S") -#. ) -#. ); -#. -#. return dialog; -#. } -#: src/include/firewall/subdialogs.rb:1041 +#. Only for Expert configuration +#. +#. term IPv6Support () { +#. term dialog = `Frame ( +#. _("IPv6 Support"), +#. `VBox ( +#. `Label ("H I C S U N T L E O N E S") +#. ) +#. ); +#. +#. return dialog; +#. } +#: src/include/firewall/subdialogs.rb:1041 msgid "Custom Allowed Rules" msgstr "사용자 정의 허용 규칙" -#. TRANSLATORS: combo box -#: src/include/firewall/subdialogs.rb:1048 +#. TRANSLATORS: combo box +#: src/include/firewall/subdialogs.rb:1048 msgid "Firewall &Zone" msgstr "방화벽 영역(&Z)" -#: src/include/firewall/subdialogs.rb:1060 +#: src/include/firewall/subdialogs.rb:1060 msgid "Options" msgstr "옵션" -#: src/include/firewall/subdialogs.rb:1082 +#: src/include/firewall/subdialogs.rb:1082 msgid "Add New Allowing Rule" msgstr "새 허용 규칙 추가" -#: src/include/firewall/subdialogs.rb:1087 +#: src/include/firewall/subdialogs.rb:1087 msgid "Source &Network" msgstr "원본 네트워크(&N)" -#: src/include/firewall/subdialogs.rb:1106 +#: src/include/firewall/subdialogs.rb:1106 msgid "&Destination Port (Optional)" msgstr "대상 포트(선택 사항)(&D)" -#: src/include/firewall/subdialogs.rb:1111 +#: src/include/firewall/subdialogs.rb:1111 msgid "&Source Port (Optional)" msgstr "원본 포트(선택 사항)(&S)" -#: src/include/firewall/subdialogs.rb:1116 +#: src/include/firewall/subdialogs.rb:1116 msgid "Additional &Options (Optional)" msgstr "추가 옵션(선택사항)(&O)" -#. TRANSLATORS: informative label in dialog -#: src/include/firewall/subdialogs.rb:1144 +#. TRANSLATORS: informative label in dialog +#: src/include/firewall/subdialogs.rb:1144 msgid "Creating summary..." msgstr "요약 작성 중..." -#. TRANSLATORS: check box in summary dialog -#: src/include/firewall/subdialogs.rb:1147 +#. TRANSLATORS: check box in summary dialog +#: src/include/firewall/subdialogs.rb:1147 msgid "&Show Details" msgstr "상세 보기(&S)" -#. TRANSLATORS: Summary item label -#: src/include/firewall/summary.rb:53 +#. TRANSLATORS: Summary item label +#: src/include/firewall/summary.rb:53 msgid "TCP Ports" msgstr "TCP 포트" -#. TRANSLATORS: Summary item label -#: src/include/firewall/summary.rb:55 +#. TRANSLATORS: Summary item label +#: src/include/firewall/summary.rb:55 msgid "UDP Ports" msgstr "UDP 포트" -#. TRANSLATORS: Summary item label -#: src/include/firewall/summary.rb:57 +#. TRANSLATORS: Summary item label +#: src/include/firewall/summary.rb:57 msgid "RPC Services" msgstr "RPC 서비스" -#. TRANSLATORS: Summary item label -#: src/include/firewall/summary.rb:59 +#. TRANSLATORS: Summary item label +#: src/include/firewall/summary.rb:59 msgid "IP Protocols" msgstr "IP 프로토콜" -#. TRANSLATORS: Summary item label -#: src/include/firewall/summary.rb:61 +#. TRANSLATORS: Summary item label +#: src/include/firewall/summary.rb:61 msgid "Broadcast Ports" msgstr "브로드캐스트 포트" -#. (NetworkService::IsManaged() ? -#. // TRANSLATORS: an informative text, text presented in HTML - newlines are not needed -#. _("All network interfaces handled by NetworkManager and all other unassigned interfaces will be assigned to this zone.") -#. : -#. TRANSLATORS: an informative text, text presented in HTML - newlines are not needed -#: src/include/firewall/summary.rb:107 +#. (NetworkService::IsManaged() ? +#. // TRANSLATORS: an informative text, text presented in HTML - newlines are not needed +#. _("All network interfaces handled by NetworkManager and all other unassigned interfaces will be assigned to this zone.") +#. : +#. TRANSLATORS: an informative text, text presented in HTML - newlines are not needed +#: src/include/firewall/summary.rb:107 msgid "Any unassigned interface will be assigned to this zone." msgstr "할당되지 않은 인터페이스는 모두 이 영역에 할당됩니다." -#. TRANSLATORS: informative text -#: src/include/firewall/summary.rb:114 +#. TRANSLATORS: informative text +#: src/include/firewall/summary.rb:114 msgid "Currently supported only in external zone." msgstr "현재 외부 영역에서만 지원됩니다." -#. TRANSLATORS: informative text -#: src/include/firewall/summary.rb:121 +#. TRANSLATORS: informative text +#: src/include/firewall/summary.rb:121 msgid "Unknown network interface." msgstr "알 수 없는 네트워크 인터페이스입니다." -#. TRANSLATORS: informative text -#: src/include/firewall/summary.rb:198 +#. TRANSLATORS: informative text +#: src/include/firewall/summary.rb:198 msgid "No interfaces assigned to this zone." msgstr "이 영역에는 인터페이스가 할당되지 않았습니다." -#. TRANSLATORS: CommandLine summary header -#. TRANSLATORS: UI summary header -#: src/include/firewall/summary.rb:349 src/include/firewall/summary.rb:351 +#. TRANSLATORS: CommandLine summary header +#. TRANSLATORS: UI summary header +#: src/include/firewall/summary.rb:349 src/include/firewall/summary.rb:351 msgid "Open Services, Ports, and Protocols" msgstr "기타 서비스, 포트 및 프로토콜" -#. TRANSLATORS: informative text -#: src/include/firewall/summary.rb:362 +#. TRANSLATORS: informative text +#: src/include/firewall/summary.rb:362 msgid "Internal zone is unprotected. All ports are open." msgstr "내부 영역이 보호되지 않습니다. 모든 포트가 열려 있습니다." -#. TRANSLATORS: informative text -#: src/include/firewall/summary.rb:431 +#. TRANSLATORS: informative text +#: src/include/firewall/summary.rb:431 msgid "Zone has no open ports." msgstr "영역에 열린 포트가 없습니다." -#: src/include/firewall/summary.rb:473 +#: src/include/firewall/summary.rb:473 msgid "%1 custom rules are defined" msgstr "%1 사용자 정의 규칙이 정의됨" -#: src/include/firewall/summary.rb:486 -msgid "" -"Network: <i>%1</i>, Protocol: <i>%2</i>, Destination port: <i>%3</i>, Source " -"port: <i>%4</i>, Options: <i>%5</i>" -msgstr "" -"네트워크: <i>%1</i>, 프로토콜: <i>%2</i>, 대상 포트: <i>%3</i>, 원본 포트: " -"<i>%4</i>, 옵션: <i>%5</i>" +#: src/include/firewall/summary.rb:486 +msgid "Network: <i>%1</i>, Protocol: <i>%2</i>, Destination port: <i>%3</i>, Source port: <i>%4</i>, Options: <i>%5</i>" +msgstr "네트워크: <i>%1</i>, 프로토콜: <i>%2</i>, 대상 포트: <i>%3</i>, 원본 포트: <i>%4</i>, 옵션: <i>%5</i>" -#: src/include/firewall/summary.rb:489 src/include/firewall/summary.rb:492 -#: src/include/firewall/summary.rb:499 src/include/firewall/summary.rb:504 +#: src/include/firewall/summary.rb:489 src/include/firewall/summary.rb:492 +#: src/include/firewall/summary.rb:499 src/include/firewall/summary.rb:504 msgid "All" msgstr "모두" -#: src/include/firewall/summary.rb:507 +#: src/include/firewall/summary.rb:507 msgid "None" msgstr "없음" -#. TRANSLATORS: CommandLine Summary header -#. TRANSLATORS: UI Summary header -#: src/include/firewall/summary.rb:547 src/include/firewall/summary.rb:549 +#. TRANSLATORS: CommandLine Summary header +#. TRANSLATORS: UI Summary header +#: src/include/firewall/summary.rb:547 src/include/firewall/summary.rb:549 msgid "Firewall Starting" msgstr "방화벽 시작" -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:563 +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:563 msgid "<b>Enable</b> firewall automatic starting" msgstr "방화벽 자동 시작 <b>활성화</b>" -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:575 +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:575 msgid "<b>Disable</b> firewall automatic starting" msgstr "방화벽 자동 시작 <b>비활성화</b>" -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:592 +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:592 msgid "Firewall starts after the configuration has been written" msgstr "구성이 작성된 후 방화벽이 시작됨" -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:605 +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:605 msgid "Firewall <b>starts</b> after the configuration has been written" msgstr "구성이 작성된 후 방화벽이 <b>시작됨</b>" -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:622 -msgid "" -"Firewall <b>will be stopped</b> after the configuration has been written" +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:622 +msgid "Firewall <b>will be stopped</b> after the configuration has been written" msgstr "구성이 작성된 후 방화벽이 <b>중지됨</b>" -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:637 +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:637 msgid "Firewall will not start after the configuration has been written" msgstr "구성이 작성된 후 방화벽이 시작되지 않음" -#. TRANSLATORS: Summary text item -#. TRANSLATORS: Summary text item -#: src/include/firewall/summary.rb:659 src/include/firewall/summary.rb:661 +#. TRANSLATORS: Summary text item +#. TRANSLATORS: Summary text item +#: src/include/firewall/summary.rb:659 src/include/firewall/summary.rb:661 msgid "Unassigned Interfaces" msgstr "할당되지 않은 인터페이스" -#. TRANSLATORS: Warning plain text in summary -#: src/include/firewall/summary.rb:690 +#. TRANSLATORS: Warning plain text in summary +#: src/include/firewall/summary.rb:690 msgid "No network traffic is permitted through these interfaces." msgstr "이 인터페이스를 통한 네트워크 트래픽은 허용되지 않습니다." -#. Function starts Firewall services and sets firewall -#. to be started after exiting YaST -#: src/include/firewall/uifunctions.rb:136 +#. Function starts Firewall services and sets firewall +#. to be started after exiting YaST +#: src/include/firewall/uifunctions.rb:136 msgid "Starting firewall..." msgstr "방화벽 시작 중..." -#. Function stops Firewall services and sets firewall -#. to be stopped after exiting YaST -#: src/include/firewall/uifunctions.rb:147 +#. Function stops Firewall services and sets firewall +#. to be stopped after exiting YaST +#: src/include/firewall/uifunctions.rb:147 msgid "Stopping firewall..." msgstr "방화벽 중지 중..." -#. TRANSLATORS: table item, connected with firewall zone of interface -#: src/include/firewall/uifunctions.rb:184 +#. TRANSLATORS: table item, connected with firewall zone of interface +#: src/include/firewall/uifunctions.rb:184 msgid "No zone assigned" msgstr "할당된 영역 없음" -#. TRANSLATORS: table item, "User defined string" instead of Device_name -#: src/include/firewall/uifunctions.rb:224 +#. TRANSLATORS: table item, "User defined string" instead of Device_name +#: src/include/firewall/uifunctions.rb:224 msgid "Custom string" msgstr "사용자 정의 문자열" -#. interface could be unassigned -#. TRANSLATORAS: selection box item, connected with firewall zone of interface -#: src/include/firewall/uifunctions.rb:288 +#. interface could be unassigned +#. TRANSLATORAS: selection box item, connected with firewall zone of interface +#: src/include/firewall/uifunctions.rb:288 msgid "No Zone Assigned" msgstr "할당된 영역 없음" -#. TRANSLATORS: error message, %1 stands for the port number -#: src/include/firewall/uifunctions.rb:487 +#. TRANSLATORS: error message, %1 stands for the port number +#: src/include/firewall/uifunctions.rb:487 msgid "Port number %1 is invalid." msgstr "%1 포트 번호가 올바르지 않습니다." -#. TRANSLATORS: error message, %1 stands for the port number, -#. %2 stands for, e.g., port range, where the wrong port definition %1 was found -#: src/include/firewall/uifunctions.rb:492 +#. TRANSLATORS: error message, %1 stands for the port number, +#. %2 stands for, e.g., port range, where the wrong port definition %1 was found +#: src/include/firewall/uifunctions.rb:492 msgid "Port number %1 in definition %2 is invalid." msgstr "%2 정의의 %1 포트 번호가 올바르지 않습니다." -#. TRANSLATORS: popup headline -#: src/include/firewall/uifunctions.rb:500 +#. TRANSLATORS: popup headline +#: src/include/firewall/uifunctions.rb:500 msgid "Invalid Port Definition" msgstr "잘못된 포트 정의" -#. TRANSLATORS: popup message, %1 stands for the maximal port number -#. that is possible to use in port-range -#: src/include/firewall/uifunctions.rb:506 +#. TRANSLATORS: popup message, %1 stands for the maximal port number +#. that is possible to use in port-range +#: src/include/firewall/uifunctions.rb:506 msgid "The port number must be in the interval from 1 to %1 (inclusive)." msgstr "포트 번호는 1 - %1 사이에 있어야 합니다." -#. TRANSLATORS: popup headline -#: src/include/firewall/uifunctions.rb:584 +#. TRANSLATORS: popup headline +#: src/include/firewall/uifunctions.rb:584 msgid "Invalid Port Range Definition" msgstr "잘못된 포트 범위 정의" -#. TRANSLATORS: popup message, %1 is a port-range defined by user -#: src/include/firewall/uifunctions.rb:587 +#. TRANSLATORS: popup message, %1 is a port-range defined by user +#: src/include/firewall/uifunctions.rb:587 msgid "" "Port range %1 is invalid.\n" "It must be defined as the min_port_number:max_port_number and\n" @@ -1323,13 +1256,13 @@ "범위는 min_port_number:max_port_number 형식으로 정의해야 하며\n" " max_port_number가 min_port_number보다 커야 합니다." -#. TRANSLATORS: popup headline -#: src/include/firewall/uifunctions.rb:604 +#. TRANSLATORS: popup headline +#: src/include/firewall/uifunctions.rb:604 msgid "Unknown Port Name" msgstr "알 수 없는 포트 이름입니다." -#. TRANSLATORS: popup message, %1 is a port-name -#: src/include/firewall/uifunctions.rb:607 +#. TRANSLATORS: popup message, %1 is a port-name +#: src/include/firewall/uifunctions.rb:607 msgid "" "Port name %1 is unknown in your current system.\n" "It probably would not work.\n" @@ -1339,13 +1272,13 @@ "작동되지 않을 수도 있습니다.\n" " 이 포트를 사용하시겠습니까?\n" -#. TRANSLATORS: popup headline -#: src/include/firewall/uifunctions.rb:636 +#. TRANSLATORS: popup headline +#: src/include/firewall/uifunctions.rb:636 msgid "Invalid Additional Service Definition" msgstr "잘못된 추가 서비스 정의" -#. TRANSLATORS: popup message, %1 stands for the wrong settings (might be quite long) -#: src/include/firewall/uifunctions.rb:639 +#. TRANSLATORS: popup message, %1 stands for the wrong settings (might be quite long) +#: src/include/firewall/uifunctions.rb:639 msgid "" "It appears that the additional service settings\n" "%1\n" @@ -1359,30 +1292,27 @@ "항목을 구분해야 합니다.\n" "현재 설정을 사용하시겠습니까?" -#. : -#. `Left(`Label("FIXME: missing functionality for expert configuration")) -#. ) -#. (!IsThisExpertConfiguration() ? -#. TRANSLATORS: informative label -#: src/include/firewall/uifunctions.rb:1035 -msgid "" -"Masquerading needs at least one external interface and one other interface." -msgstr "" -"마스커레이딩을 설정하려면 적어도 하나의 외부 인터페이스 및 하나의 다른 인터페" -"이스가 필요합니다." +#. : +#. `Left(`Label("FIXME: missing functionality for expert configuration")) +#. ) +#. (!IsThisExpertConfiguration() ? +#. TRANSLATORS: informative label +#: src/include/firewall/uifunctions.rb:1035 +msgid "Masquerading needs at least one external interface and one other interface." +msgstr "마스커레이딩을 설정하려면 적어도 하나의 외부 인터페이스 및 하나의 다른 인터페이스가 필요합니다." -#. TRANSLATORS: popup message -#: src/include/firewall/uifunctions.rb:1056 +#. TRANSLATORS: popup message +#: src/include/firewall/uifunctions.rb:1056 msgid "This entry must be completed." msgstr "이 항목은 완료해야 합니다." -#. TRANSLATORS: popup message, right port definition is two lines below this message -#: src/include/firewall/uifunctions.rb:1080 +#. TRANSLATORS: popup message, right port definition is two lines below this message +#: src/include/firewall/uifunctions.rb:1080 msgid "Wrong port definition." msgstr "포트 정의가 잘못되었습니다." -#. TRANSLATORS: popup error message -#: src/include/firewall/uifunctions.rb:1107 +#. TRANSLATORS: popup error message +#: src/include/firewall/uifunctions.rb:1107 msgid "" "Wrong port definition.\n" "No port number found for this port name.\n" @@ -1392,18 +1322,18 @@ "이 포트 이름에는 포트 번호가 없습니다.\n" " 포트 이름 대신 포트 번호를 사용하십시오.\n" -#. TRANSLATORS: popup message, right definition is two lines below this message -#: src/include/firewall/uifunctions.rb:1136 +#. TRANSLATORS: popup message, right definition is two lines below this message +#: src/include/firewall/uifunctions.rb:1136 msgid "Invalid IP definition." msgstr "IP 정의가 잘못되었습니다." -#. TRANSLATORS: check box -#: src/include/firewall/uifunctions.rb:1463 +#. TRANSLATORS: check box +#: src/include/firewall/uifunctions.rb:1463 msgid "&Log Not Accepted Broadcast Packets" msgstr "허용되지 않은 브로드캐스트 패킷 기록(&L)" -#. TRANSLATORS: popup question -#: src/include/firewall/uifunctions.rb:1524 +#. TRANSLATORS: popup question +#: src/include/firewall/uifunctions.rb:1524 msgid "" "Firewall automatic starting has been disabled\n" "but firewall is currently running.\n" @@ -1415,655 +1345,655 @@ "\n" "새 구성이 작성된 후 방화벽을 중지하시겠습니까?\n" -#. network is mandatory -#: src/include/firewall/uifunctions.rb:1703 -#: src/include/firewall/uifunctions.rb:1910 +#. network is mandatory +#: src/include/firewall/uifunctions.rb:1703 +#: src/include/firewall/uifunctions.rb:1910 msgid "Invalid network definition '%1'" msgstr "네트워크 정의 '%1'이(가) 잘못되었습니다." -#. destination port is optional -#. source port is optional -#: src/include/firewall/uifunctions.rb:1721 -#: src/include/firewall/uifunctions.rb:1752 +#. destination port is optional +#. source port is optional +#: src/include/firewall/uifunctions.rb:1721 +#: src/include/firewall/uifunctions.rb:1752 msgid "Invalid port range '%1'" msgstr "포트 범위 '%1'이(가) 잘못되었습니다." -#: src/include/firewall/uifunctions.rb:1733 -#: src/include/firewall/uifunctions.rb:1764 -#: src/include/firewall/uifunctions.rb:1924 +#: src/include/firewall/uifunctions.rb:1733 +#: src/include/firewall/uifunctions.rb:1764 +#: src/include/firewall/uifunctions.rb:1924 msgid "Invalid port name or number '%1'" msgstr "포트 이름 또는 번호 '%1'이(가) 잘못되었습니다." -#: src/include/firewall/uifunctions.rb:1827 +#: src/include/firewall/uifunctions.rb:1827 msgid "All services using UDP" msgstr "모든 서비스가 UDP를 사용" -#: src/include/firewall/uifunctions.rb:1829 +#: src/include/firewall/uifunctions.rb:1829 msgid "All services using TCP" msgstr "모든 서비스가 TCP를 사용" -#: src/include/firewall/uifunctions.rb:1831 +#: src/include/firewall/uifunctions.rb:1831 msgid "Samba browsing" msgstr "Samba 찾아보기" -#: src/include/firewall/uifunctions.rb:1833 +#: src/include/firewall/uifunctions.rb:1833 msgid "SLP browsing" msgstr "SLP 찾아보기" -#: src/include/firewall/uifunctions.rb:1845 +#: src/include/firewall/uifunctions.rb:1845 msgid "All networks" msgstr "모든 네트워크" -#: src/include/firewall/uifunctions.rb:1847 +#: src/include/firewall/uifunctions.rb:1847 msgid "Subnet: %1" msgstr "서브넷: %1" -#. hard-coded default -#: src/include/firewall/uifunctions.rb:1952 +#. hard-coded default +#: src/include/firewall/uifunctions.rb:1952 msgid "&Zone" msgstr "영역(&Z)" -#: src/include/firewall/uifunctions.rb:1956 +#: src/include/firewall/uifunctions.rb:1956 msgid "&Network" msgstr "네트워크(&N)" -#: src/include/firewall/uifunctions.rb:1963 +#: src/include/firewall/uifunctions.rb:1963 msgid "&Service" msgstr "서비스(&S)" -#: src/include/firewall/uifunctions.rb:1969 +#: src/include/firewall/uifunctions.rb:1969 msgid "User-defined service" msgstr "사용자 정의 서비스" -#: src/include/firewall/uifunctions.rb:1994 +#: src/include/firewall/uifunctions.rb:1994 msgid "Po&rt" msgstr "포트(&R)" -#. redraw table -#: src/include/firewall/uifunctions.rb:2089 +#. redraw table +#: src/include/firewall/uifunctions.rb:2089 msgid "Select an item to delete." msgstr "삭제할 항목을 선택하십시오." -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:56 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:56 msgid "Firewall configuration" msgstr "방화벽 설정" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:65 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:65 msgid "Start-up settings" msgstr "시작 설정" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:71 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:71 msgid "Known firewall zones" msgstr "알려진 방화벽 영역" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:79 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:79 msgid "Network interfaces configuration" msgstr "네트워크 인터페이스 구성" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:90 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:90 msgid "Allowed services, ports, and protocols" msgstr "허용된 서비스, 포트 및 프로토콜" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:103 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:103 msgid "Broadcast packet settings" msgstr "브로드캐스트 패킷 설정" -#. TRANSLATORS: CommandLine -#: src/modules/SuSEFirewallCMDLine.rb:111 +#. TRANSLATORS: CommandLine +#: src/modules/SuSEFirewallCMDLine.rb:111 msgid "Masquerading settings" msgstr "마스커레이딩 설정" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:117 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:117 msgid "Redirect requests to masqueraded IP" msgstr "마스커레이드된 IP로 리디렉션 요청" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:125 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:125 msgid "Logging settings" msgstr "로깅 설정" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:134 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:134 msgid "Firewall configuration summary" msgstr "방화벽 구성 요약" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:142 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:142 msgid "Enables firewall" msgstr "방화벽 활성화" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:148 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:148 msgid "Disables firewall" msgstr "방화벽 비활성화" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:155 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:155 msgid "Show current settings" msgstr "현재 설정 표시" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:159 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:159 msgid "Start firewall in the boot process" msgstr "부팅 과정 중에 방화벽 시작" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:165 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:165 msgid "Start firewall manually" msgstr "수동으로 방화벽 시작" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:171 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:171 msgid "List configured entries" msgstr "구성된 항목을 나열합니다." -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:178 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:178 msgid "Zone short name" msgstr "짧은 영역 이름" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:182 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:182 msgid "Add a new record" msgstr "새 레코드 추가" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:186 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:186 msgid "Remove a record" msgstr "레코드 제거" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:191 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:191 msgid "Network interface configuration name" msgstr "네트워크 인터페이스 구성 이름" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:198 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:198 msgid "Logging accepted packets (all|crit|none)" msgstr "허용된 패킷 로깅(모두|중요|없음)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:205 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:205 msgid "Logging not accepted packets (all|crit|none)" msgstr "허용되지 않은 패킷 로깅(모두|중요|없음)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:212 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:212 msgid "Logging broadcast packets (yes|no)" msgstr "브로드캐스트 패킷(예|아니요)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:218 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:218 msgid "Set value" msgstr "값 설정" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:223 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:223 msgid "Port name or number; comma-separate multiple ports" msgstr "포트 이름 또는 번호; 다중 포트 쉼표로 구분" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:230 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:230 msgid "Known firewall service; comma-separate multiple services" msgstr "알려진 방화벽 서비스; 다중 서비스 쉼표로 구분" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:237 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:237 msgid "TCP port name or number; comma-separate multiple ports" msgstr "TCP 포트 이름 또는 번호; 다중 포트 쉼표로 구분" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:244 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:244 msgid "UDP port name or number; comma-separate multiple ports" msgstr "UDP 포트 이름 또는 번호; 다중 포트 쉼표로 구분" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:251 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:251 msgid "RPC port name; comma-separate multiple ports" msgstr "RPC 포트 이름; 다중 포트 쉼표로 구분" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:258 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:258 msgid "IP protocol name; comma-separate multiple protocols" msgstr "IP 프로토콜 이름; 다중 프로토콜 쉼표로 구분" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:265 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:265 msgid "Set zone protection (yes|no)" msgstr "영역 보호 설정(예|아니요)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:271 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:271 msgid "Detailed information" msgstr "세부 정보" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:275 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:275 msgid "Enable option" msgstr "옵션 활성화" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:279 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:279 msgid "Disable option" msgstr "옵션 비활성화" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:284 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:284 msgid "Source network, such as 0/0 or 145.12.35.0/255.255.255.0" msgstr "소스 네트워크(예: 0/0 또는 145.12.35.0/255.255.255.0)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:291 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:291 msgid "Protocol (tcp|udp)" msgstr "프로토콜(tcp|udp)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:296 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:296 msgid "Requested external IP (optional)" msgstr "요청된 외부 IP(선택 사항)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:303 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:303 msgid "Requested port name or number" msgstr "요청된 포트 이름 또는 번호" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:310 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:310 msgid "Redirect to internal IP" msgstr "내부 IP로 리디렉션" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:317 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:317 msgid "Redirect to port on internal IP (optional)" msgstr "IP의 포트로 리디렉션(선택 사항)" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:324 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:324 msgid "Record number" msgstr "레코드 번호" -#. TRANSLATORS: CommandLine help -#: src/modules/SuSEFirewallCMDLine.rb:328 +#. TRANSLATORS: CommandLine help +#: src/modules/SuSEFirewallCMDLine.rb:328 msgid "Use port names instead of port numbers" msgstr "포트 번호 대신 포트 이름 사용" -#. TRANSLATORS: CommandLine error, %1 is a firewall zone shortcut -#. TRANSLATORS: CommandLine error, %1 is zone -#: src/modules/SuSEFirewallCMDLine.rb:405 -#: src/modules/SuSEFirewallCMDLine.rb:1556 +#. TRANSLATORS: CommandLine error, %1 is a firewall zone shortcut +#. TRANSLATORS: CommandLine error, %1 is zone +#: src/modules/SuSEFirewallCMDLine.rb:405 +#: src/modules/SuSEFirewallCMDLine.rb:1556 msgid "Unknown zone %1." msgstr "%1은(는) 알 수 없는 영역입니다." -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#. TRANSLATORS: CommandLine error, %1 is needed parameter name -#: src/modules/SuSEFirewallCMDLine.rb:418 -#: src/modules/SuSEFirewallCMDLine.rb:629 -#: src/modules/SuSEFirewallCMDLine.rb:636 -#: src/modules/SuSEFirewallCMDLine.rb:668 -#: src/modules/SuSEFirewallCMDLine.rb:675 -#: src/modules/SuSEFirewallCMDLine.rb:928 -#: src/modules/SuSEFirewallCMDLine.rb:940 -#: src/modules/SuSEFirewallCMDLine.rb:1455 -#: src/modules/SuSEFirewallCMDLine.rb:1530 +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#. TRANSLATORS: CommandLine error, %1 is needed parameter name +#: src/modules/SuSEFirewallCMDLine.rb:418 +#: src/modules/SuSEFirewallCMDLine.rb:629 +#: src/modules/SuSEFirewallCMDLine.rb:636 +#: src/modules/SuSEFirewallCMDLine.rb:668 +#: src/modules/SuSEFirewallCMDLine.rb:675 +#: src/modules/SuSEFirewallCMDLine.rb:928 +#: src/modules/SuSEFirewallCMDLine.rb:940 +#: src/modules/SuSEFirewallCMDLine.rb:1455 +#: src/modules/SuSEFirewallCMDLine.rb:1530 msgid "Parameter %1 must be set." msgstr "%1 매개변수를 설정해야 합니다." -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:429 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:429 msgid "Listing Known Firewall Zones:" msgstr "알려진 방화벽 영역 목록:" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:444 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:444 msgid "Shortcut" msgstr "바로 가기" -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine header item -#: src/modules/SuSEFirewallCMDLine.rb:446 -#: src/modules/SuSEFirewallCMDLine.rb:788 -#: src/modules/SuSEFirewallCMDLine.rb:908 +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine header item +#: src/modules/SuSEFirewallCMDLine.rb:446 +#: src/modules/SuSEFirewallCMDLine.rb:788 +#: src/modules/SuSEFirewallCMDLine.rb:908 msgid "Zone Name" msgstr "영역 이름" -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:491 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:491 msgid "Summary:" msgstr "요약:" -#. TRANSLATORS: CommandLine error message -#: src/modules/SuSEFirewallCMDLine.rb:516 +#. TRANSLATORS: CommandLine error message +#: src/modules/SuSEFirewallCMDLine.rb:516 msgid "Only one parameter is allowed." msgstr "하나의 매개변수만 사용할 수 있습니다." -#. TRANSLATORS: CommandLine header -#. TRANSLATORS: CommandLine header -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:520 -#: src/modules/SuSEFirewallCMDLine.rb:529 -#: src/modules/SuSEFirewallCMDLine.rb:538 +#. TRANSLATORS: CommandLine header +#. TRANSLATORS: CommandLine header +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:520 +#: src/modules/SuSEFirewallCMDLine.rb:529 +#: src/modules/SuSEFirewallCMDLine.rb:538 msgid "Start-Up:" msgstr "시작:" -#. TRANSLATORS: CommandLine progress information -#: src/modules/SuSEFirewallCMDLine.rb:523 +#. TRANSLATORS: CommandLine progress information +#: src/modules/SuSEFirewallCMDLine.rb:523 msgid "Enabling firewall in the boot process..." msgstr "부팅 과정 중에 방화벽 활성화 중..." -#. TRANSLATORS: CommandLine progress information -#: src/modules/SuSEFirewallCMDLine.rb:532 +#. TRANSLATORS: CommandLine progress information +#: src/modules/SuSEFirewallCMDLine.rb:532 msgid "Removing firewall from the boot process..." msgstr "부팅 과정에서 방화벽 제거 중..." -#. TRANSLATORS: CommandLine informative text -#: src/modules/SuSEFirewallCMDLine.rb:542 +#. TRANSLATORS: CommandLine informative text +#: src/modules/SuSEFirewallCMDLine.rb:542 msgid "Firewall is enabled in the boot process" msgstr "부팅 과정 중에 방화벽을 활성화합니다." -#. TRANSLATORS: CommandLine informative text -#: src/modules/SuSEFirewallCMDLine.rb:545 +#. TRANSLATORS: CommandLine informative text +#: src/modules/SuSEFirewallCMDLine.rb:545 msgid "Firewall needs manual starting" msgstr "방화벽을 수동으로 시작해야 합니다." -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:578 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:578 msgid "Network Interfaces in Firewall Zones:" msgstr "방화벽 영역의 네트워크 인터페이스:" -#. TRANSLATORS: CommandLine table item (unknown/special string/interface) -#: src/modules/SuSEFirewallCMDLine.rb:596 +#. TRANSLATORS: CommandLine table item (unknown/special string/interface) +#: src/modules/SuSEFirewallCMDLine.rb:596 msgid "Special firewall string" msgstr "특수 방화벽 문자열" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:616 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:616 msgid "Interface" msgstr "인터페이스" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:618 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:618 msgid "Device Name" msgstr "장치 이름" -#. TRANSLATORS: CommandLine progress information, %1 is the special string, %2 is the zone name -#: src/modules/SuSEFirewallCMDLine.rb:645 +#. TRANSLATORS: CommandLine progress information, %1 is the special string, %2 is the zone name +#: src/modules/SuSEFirewallCMDLine.rb:645 msgid "Adding special string %1 into zone %2..." msgstr "특수 문자열 %1을(를) %2 영역에 추가 중..." -#. TRANSLATORS: CommandLine progress information, %1 is the network interface name, %2 is the zone name -#: src/modules/SuSEFirewallCMDLine.rb:655 +#. TRANSLATORS: CommandLine progress information, %1 is the network interface name, %2 is the zone name +#: src/modules/SuSEFirewallCMDLine.rb:655 msgid "Adding interface %1 into zone %2..." msgstr "인터페이스 %1을(를) %2 영역에 추가 중..." -#. TRANSLATORS: CommandLine progress information, %1 is the special string, %2 is the zone name -#: src/modules/SuSEFirewallCMDLine.rb:684 +#. TRANSLATORS: CommandLine progress information, %1 is the special string, %2 is the zone name +#: src/modules/SuSEFirewallCMDLine.rb:684 msgid "Removing special string %1 from zone %2..." msgstr "특수 문자열 %1을(를) %2 영역에서 제거 중..." -#. TRANSLATORS: CommandLine progress information, %1 is the network interface name, %2 is the zone name -#: src/modules/SuSEFirewallCMDLine.rb:694 +#. TRANSLATORS: CommandLine progress information, %1 is the network interface name, %2 is the zone name +#: src/modules/SuSEFirewallCMDLine.rb:694 msgid "Removing interface %1 from zone %2..." msgstr "인터페이스 %1을(를) %2 영역에서 제거 중..." -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:715 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:715 msgid "Log all" msgstr "모두 기록" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:717 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:717 msgid "Log only critical" msgstr "중요한 내용만 기록" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:719 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:719 msgid "Do not log any" msgstr "기록하지 않음" -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:729 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:729 msgid "Global Logging Settings:" msgstr "전역 로깅 설정:" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:737 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:737 msgid "Rule Type" msgstr "규칙 유형" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:739 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:739 msgid "Value" msgstr "값" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:745 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:745 msgid "Accepted" msgstr "허용됨" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:751 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:751 msgid "Not accepted" msgstr "허용되지 않음" -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:763 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:763 msgid "Logging Broadcast Packets:" msgstr "브로드캐스트 패킷 로깅:" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:776 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:776 msgid "Logging enabled" msgstr "로깅 활성화" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:778 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:778 msgid "Logging disabled" msgstr "로깅 비활성화" -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine header item -#: src/modules/SuSEFirewallCMDLine.rb:786 -#: src/modules/SuSEFirewallCMDLine.rb:906 +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine header item +#: src/modules/SuSEFirewallCMDLine.rb:786 +#: src/modules/SuSEFirewallCMDLine.rb:906 msgid "Short" msgstr "짧음" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:790 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:790 msgid "Logging Status" msgstr "로깅 상태" -#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name -#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name -#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name -#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name -#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name -#: src/modules/SuSEFirewallCMDLine.rb:807 -#: src/modules/SuSEFirewallCMDLine.rb:822 -#: src/modules/SuSEFirewallCMDLine.rb:851 -#: src/modules/SuSEFirewallCMDLine.rb:1275 -#: src/modules/SuSEFirewallCMDLine.rb:1481 +#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name +#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name +#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name +#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name +#. TRANSLATORS: CommandLine error message, %1 is an option value, %2 is an option name +#: src/modules/SuSEFirewallCMDLine.rb:807 +#: src/modules/SuSEFirewallCMDLine.rb:822 +#: src/modules/SuSEFirewallCMDLine.rb:851 +#: src/modules/SuSEFirewallCMDLine.rb:1275 +#: src/modules/SuSEFirewallCMDLine.rb:1481 msgid "Value %1 is not allowed for option %2." msgstr "%1 값은 %2 옵션에 대해 사용할 수 없습니다." -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:891 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:891 msgid "Allowed Broadcast Ports:" msgstr "허용되는 브로드캐스트 포트:" -#. TRANSLATORS: CommandLine header item -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:910 -#: src/modules/SuSEFirewallCMDLine.rb:1146 +#. TRANSLATORS: CommandLine header item +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:910 +#: src/modules/SuSEFirewallCMDLine.rb:1146 msgid "Port" msgstr "포트" -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/modules/SuSEFirewallCMDLine.rb:921 -#: src/modules/SuSEFirewallCMDLine.rb:1317 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/modules/SuSEFirewallCMDLine.rb:921 +#: src/modules/SuSEFirewallCMDLine.rb:1317 msgid "Only one action command is allowed here." msgstr "여기서는 하나의 작업 명령만 사용할 수 있습니다." -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:987 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:987 msgid "Defined Firewall Services:" msgstr "정의된 방화벽 서비스:" -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:998 -#: src/modules/SuSEFirewallCMDLine.rb:1416 +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:998 +#: src/modules/SuSEFirewallCMDLine.rb:1416 msgid "ID" msgstr "ID" -#. TRANSLATORS: CommandLine table header item -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:1000 -#: src/modules/SuSEFirewallCMDLine.rb:1101 +#. TRANSLATORS: CommandLine table header item +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:1000 +#: src/modules/SuSEFirewallCMDLine.rb:1101 msgid "Service Name" msgstr "서비스 이름" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:1022 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:1022 msgid "TCP port" msgstr "TCP 포트" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:1024 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:1024 msgid "UDP port" msgstr "UDP 포트" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:1026 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:1026 msgid "RPC port" msgstr "RPC 포트" -#. TRANSLATORS: CommandLine table item -#: src/modules/SuSEFirewallCMDLine.rb:1028 +#. TRANSLATORS: CommandLine table item +#: src/modules/SuSEFirewallCMDLine.rb:1028 msgid "IP protocol" msgstr "IP 프로토콜" -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:1034 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:1034 msgid "Allowed Services in Zones:" msgstr "영역에서 허용된 서비스:" -#. TRANSLATORS: CommandLine table item (all firewall services are allowed in this zone) -#: src/modules/SuSEFirewallCMDLine.rb:1047 +#. TRANSLATORS: CommandLine table item (all firewall services are allowed in this zone) +#: src/modules/SuSEFirewallCMDLine.rb:1047 msgid "All services" msgstr "모든 서비스" -#. TRANSLATORS: CommandLine table item (this zone is not protected at all) -#. TRANSLATORS: CommandLine table item (this zone is not protected at all) -#. TRANSLATORS: CommandLine table item (this zone is not protected at all) -#: src/modules/SuSEFirewallCMDLine.rb:1050 -#: src/modules/SuSEFirewallCMDLine.rb:1127 -#: src/modules/SuSEFirewallCMDLine.rb:1176 +#. TRANSLATORS: CommandLine table item (this zone is not protected at all) +#. TRANSLATORS: CommandLine table item (this zone is not protected at all) +#. TRANSLATORS: CommandLine table item (this zone is not protected at all) +#: src/modules/SuSEFirewallCMDLine.rb:1050 +#: src/modules/SuSEFirewallCMDLine.rb:1127 +#: src/modules/SuSEFirewallCMDLine.rb:1176 msgid "Entire zone unprotected" msgstr "보호되지 않은 전체 영역" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:1099 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:1099 msgid "Service ID" msgstr "서비스 ID" -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:1111 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:1111 msgid "Additional Allowed Ports:" msgstr "추가로 허용된 포트:" -#. TRANSLATORS: CommandLine table item (all ports are allowed in this zone) -#: src/modules/SuSEFirewallCMDLine.rb:1124 +#. TRANSLATORS: CommandLine table item (all ports are allowed in this zone) +#: src/modules/SuSEFirewallCMDLine.rb:1124 msgid "All ports" msgstr "모든 포트" -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:1158 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:1158 msgid "Allowed Additional IP Protocols in Zones:" msgstr "영역에서 추가로 허용된 IP 프로토콜:" -#. TRANSLATORS: CommandLine table item (all protocols are allowed in this zone) -#: src/modules/SuSEFirewallCMDLine.rb:1173 +#. TRANSLATORS: CommandLine table item (all protocols are allowed in this zone) +#: src/modules/SuSEFirewallCMDLine.rb:1173 msgid "All IP protocols" msgstr "모든 IP 프로토콜" -#. TRANSLATORS: CommandLine table header item -#: src/modules/SuSEFirewallCMDLine.rb:1191 +#. TRANSLATORS: CommandLine table header item +#: src/modules/SuSEFirewallCMDLine.rb:1191 msgid "IP Protocol" msgstr "IP 프로토콜" -#. TRANSLATORS: CommandLine error message, %1 is a service id -#: src/modules/SuSEFirewallCMDLine.rb:1212 +#. TRANSLATORS: CommandLine error message, %1 is a service id +#: src/modules/SuSEFirewallCMDLine.rb:1212 msgid "Unknown service %1." msgstr "%1은(는) 알 수 없는 서비스입니다." -#. TRANSLATORS: CommandLine error message -#: src/modules/SuSEFirewallCMDLine.rb:1285 +#. TRANSLATORS: CommandLine error message +#: src/modules/SuSEFirewallCMDLine.rb:1285 msgid "Protection can only be set for internal zones." msgstr "내부 영역에 대해서만 보호를 설정할 수 있습니다." -#. TRANSLATORS: CommandLine error message, %1 is a list of possible entries (without translation) -#: src/modules/SuSEFirewallCMDLine.rb:1346 +#. TRANSLATORS: CommandLine error message, %1 is a list of possible entries (without translation) +#: src/modules/SuSEFirewallCMDLine.rb:1346 msgid "At least one of %1 must be set." msgstr "%1을(를) 적어도 하나는 설정해야 합니다." -#. TRANSLATORS: CommandLine error message, %1 is a list of possible action commands -#: src/modules/SuSEFirewallCMDLine.rb:1361 +#. TRANSLATORS: CommandLine error message, %1 is a list of possible action commands +#: src/modules/SuSEFirewallCMDLine.rb:1361 msgid "At least one action command from %1 must be set." msgstr "%1에서 작업 명령을 적어도 하나는 설정해야 합니다." -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:1378 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:1378 msgid "Redirect Requests to Masqueraded IP:" msgstr "마스커레이드된 IP로 리디렉션 요청:" -#. TRANSLATORS: CommandLine error message, %1 is a port name -#: src/modules/SuSEFirewallCMDLine.rb:1504 +#. TRANSLATORS: CommandLine error message, %1 is a port name +#: src/modules/SuSEFirewallCMDLine.rb:1504 msgid "Unknown port name %1." msgstr "%1은(는) 알 수 없는 포트 이름입니다." -#. TRANSLATORS: CommandLine header -#: src/modules/SuSEFirewallCMDLine.rb:1570 +#. TRANSLATORS: CommandLine header +#: src/modules/SuSEFirewallCMDLine.rb:1570 msgid "Masquerading Settings:" msgstr "마스커레이딩 설정:" -#. TRANSLATORS: CommandLine informative text, either "everywhere" or -#. "in the %1 zone" where %1 is zone name. -#: src/modules/SuSEFirewallCMDLine.rb:1576 +#. TRANSLATORS: CommandLine informative text, either "everywhere" or +#. "in the %1 zone" where %1 is zone name. +#: src/modules/SuSEFirewallCMDLine.rb:1576 msgid "everywhere" msgstr "모두" -#: src/modules/SuSEFirewallCMDLine.rb:1577 +#: src/modules/SuSEFirewallCMDLine.rb:1577 msgid "in the %1 zone" msgstr "%1 영역에서" -#. TRANSLATORS: CommandLine informative text, %1 is "enabled" or "disabled" -#. %2 is previously mentioned zone_msg -#: src/modules/SuSEFirewallCMDLine.rb:1583 +#. TRANSLATORS: CommandLine informative text, %1 is "enabled" or "disabled" +#. %2 is previously mentioned zone_msg +#: src/modules/SuSEFirewallCMDLine.rb:1583 msgid "Masquerading is %1 %2" msgstr "마스커레이딩 상태: %1 %2" -#. TRANSLATORS: CommandLine masquerade status -#: src/modules/SuSEFirewallCMDLine.rb:1586 +#. TRANSLATORS: CommandLine masquerade status +#: src/modules/SuSEFirewallCMDLine.rb:1586 msgid "enabled" msgstr "활성화" -#. TRANSLATORS: CommandLine masquerade status -#: src/modules/SuSEFirewallCMDLine.rb:1588 +#. TRANSLATORS: CommandLine masquerade status +#: src/modules/SuSEFirewallCMDLine.rb:1588 msgid "disabled" msgstr "비활성화" Modified: branches/SLE12-SP3/yast/ko/po/firstboot.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/firstboot.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/firstboot.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,14 +14,14 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. dialog caption -#: src/clients/firstboot_auto.rb:65 +#. dialog caption +#: src/clients/firstboot_auto.rb:65 msgid "Firstboot Configuration" msgstr "처음 부팅 구성" -#. text label, describing the check box meaning -#. keep in 2 lines with roughly the same length -#: src/clients/firstboot_auto.rb:71 +#. text label, describing the check box meaning +#. keep in 2 lines with roughly the same length +#: src/clients/firstboot_auto.rb:71 msgid "" "Check Enable Firstboot Sequence here to start YaST\n" "firstboot utility on the first boot after configuration.\n" @@ -29,102 +29,99 @@ "여기서 [처음 부팅 순서 활성화]를 선택하여 구성 후 처음 부팅 시 YaST\n" "처음 부팅 유틸리티를 시작하십시오.\n" -#. check box label -#: src/clients/firstboot_auto.rb:79 +#. check box label +#: src/clients/firstboot_auto.rb:79 msgid "Enable Firstboot Sequence" msgstr "처음 부팅 순서 활성화" -#. help text -#: src/clients/firstboot_auto.rb:89 +#. help text +#: src/clients/firstboot_auto.rb:89 msgid "" -"<p>Check <b>Enable Firstboot Sequence</b> to start YaST firstboot utility on " -"the first boot after configuration.</p>\n" -"<p>Check the documentation of yast2-firstboot module for further information." -"</p>\n" +"<p>Check <b>Enable Firstboot Sequence</b> to start YaST firstboot utility on the first boot after configuration.</p>\n" +"<p>Check the documentation of yast2-firstboot module for further information.</p>\n" msgstr "" -"<p>여기서 <b>처음 부팅 순서 활성화</b>를 선택하여 구성 후 처음 부팅 시 YaST " -"처음 부팅 유틸리티를 시작하십시오.</p>\n" +"<p>여기서 <b>처음 부팅 순서 활성화</b>를 선택하여 구성 후 처음 부팅 시 YaST 처음 부팅 유틸리티를 시작하십시오.</p>\n" "<p>자세한 내용은 yast2-firstboot 모듈 설명서를 확인하십시오.</p>\n" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: clients/firstboot.ycp -#. Package: Configuration of Firstboot -#. Summary: Main file -#. Authors: Anas Nashif -#. -#. $Id$ -#. -#. Main file for firstboot configuration. Uses all other files. -#. ** -#. <h3>Configuration of firstboot</h3> -#: src/clients/firstboot_config.rb:48 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: clients/firstboot.ycp +#. Package: Configuration of Firstboot +#. Summary: Main file +#. Authors: Anas Nashif +#. +#. $Id$ +#. +#. Main file for firstboot configuration. Uses all other files. +#. ** +#. <h3>Configuration of firstboot</h3> +#: src/clients/firstboot_config.rb:48 msgid "Empty" msgstr "비어 있음" -#: src/clients/firstboot_config.rb:49 +#: src/clients/firstboot_config.rb:49 msgid "Enabled" msgstr "활성화" -#: src/clients/firstboot_config.rb:50 +#: src/clients/firstboot_config.rb:50 msgid "Disabled" msgstr "비활성화" -#: src/clients/firstboot_config.rb:54 +#: src/clients/firstboot_config.rb:54 msgid "Help" msgstr "도움말" -#: src/clients/firstboot_config.rb:57 +#: src/clients/firstboot_config.rb:57 msgid "First Boot Configuration" msgstr "최초 부팅 구성" -#: src/clients/firstboot_config.rb:59 +#: src/clients/firstboot_config.rb:59 msgid "&Up" msgstr "위로(&U)" -#: src/clients/firstboot_config.rb:60 +#: src/clients/firstboot_config.rb:60 msgid "D&own" msgstr "아래로(&D)" -#: src/clients/firstboot_config.rb:61 +#: src/clients/firstboot_config.rb:61 msgid "Enab&le or Disable" msgstr "활성화와 비활성화(&L) " -#: src/clients/firstboot_config.rb:68 +#: src/clients/firstboot_config.rb:68 msgid "Step" msgstr "단계" -#: src/clients/firstboot_config.rb:68 +#: src/clients/firstboot_config.rb:68 msgid "Label" msgstr "레이블" -#: src/clients/firstboot_config.rb:68 +#: src/clients/firstboot_config.rb:68 msgid "Status" msgstr "상태" -#: src/clients/firstboot_config.rb:68 +#: src/clients/firstboot_config.rb:68 msgid "Module Name" msgstr "모듈 이름" -#. translators: dialog text -#: src/clients/firstboot_desktop.rb:90 +#. translators: dialog text +#: src/clients/firstboot_desktop.rb:90 msgid "" "Select the desktop environment \n" "to use from the list below.\n" @@ -132,8 +129,8 @@ "사용할 데스크탑 환경을\n" "아래 목록에서 선택하십시오.\n" -#. help text fro desktop dialog -#: src/clients/firstboot_desktop.rb:105 +#. help text fro desktop dialog +#: src/clients/firstboot_desktop.rb:105 msgid "" "<p><h3>Desktop Selections</h3>\n" "This system has more than one desktop environment installed. Select\n" @@ -143,31 +140,31 @@ "이 시스템에는 둘 이상의 데스크탑 환경이 설치되어 있습니다. 기본\n" " 데스크탑으로 활성화할 데스크탑을 선택하십시오.</p>" -#. translators: dialog title -#: src/clients/firstboot_desktop.rb:113 +#. translators: dialog title +#: src/clients/firstboot_desktop.rb:113 msgid "Select Your Default Desktop" msgstr "기본 데스크탑 선택" -#. Check box: Should the YaST2 control center automatically -#. be started after this part of the installation is done? -#. Translators: About 40 characters max, -#. use newlines for longer translations. -#: src/clients/firstboot_finish.rb:64 +#. Check box: Should the YaST2 control center automatically +#. be started after this part of the installation is done? +#. Translators: About 40 characters max, +#. use newlines for longer translations. +#: src/clients/firstboot_finish.rb:64 msgid "&Start YaST Control Center" msgstr "YaST 제어판 시작(&S) " -#. caption for dialog "Congratulation Dialog" -#: src/clients/firstboot_finish.rb:70 +#. caption for dialog "Congratulation Dialog" +#: src/clients/firstboot_finish.rb:70 msgid "Configuration Completed" msgstr "구성 완료됨" -#. congratulation text 1/4 -#: src/clients/firstboot_finish.rb:73 +#. congratulation text 1/4 +#: src/clients/firstboot_finish.rb:73 msgid "<p><b>Congratulations!</b></p>" msgstr "축하합니다!" -#. congratulation text 2/4 -#: src/clients/firstboot_finish.rb:75 +#. congratulation text 2/4 +#: src/clients/firstboot_finish.rb:75 msgid "" "<p>The installation of &product; on your machine is complete.\n" "After clicking <b>Finish</b>, you can log in to the system.</p>\n" @@ -175,25 +172,25 @@ "<p>제품(&p)의 설치; 여러분의 컴퓨터상에 완벽합니다.\n" "<b>마침</b> 클릭한후에, 여러분은 그 시스템으로 로그인 합니다.</p>\n" -#. congratulation text 3/4 -#. Translators: If there exists a SuSE web-page for your language -#. change the address accordingly. If in doubt leave the original. -#: src/clients/firstboot_finish.rb:81 +#. congratulation text 3/4 +#. Translators: If there exists a SuSE web-page for your language +#. change the address accordingly. If in doubt leave the original. +#: src/clients/firstboot_finish.rb:81 msgid "<p>Visit us at www.suse.com.</p>" msgstr "<p>www.suse.com로 우리를 방문해 주세요.</p>" -#. congratulation text 4/4 -#: src/clients/firstboot_finish.rb:83 +#. congratulation text 4/4 +#: src/clients/firstboot_finish.rb:83 msgid "<p>Have a lot of fun!<br>Your SuSE Development Team</p>" msgstr "<p>즐겁게 지내세요!<br>당신의 SuSE 개발팀</p>" -#. help 1/4 for dialog "Congratulation Dialog" -#: src/clients/firstboot_finish.rb:112 +#. help 1/4 for dialog "Congratulation Dialog" +#: src/clients/firstboot_finish.rb:112 msgid "<p>Your system is ready for use.</p>" msgstr "당신의 시스템이 사용할 준비가 되었습니다." -#. help 2/4 for dialog "Congratulation Dialog" -#: src/clients/firstboot_finish.rb:114 +#. help 2/4 for dialog "Congratulation Dialog" +#: src/clients/firstboot_finish.rb:114 msgid "" "<p><b>Finish</b> will close the YaST installation and continue\n" "to the login screen.</p>\n" @@ -202,8 +199,8 @@ "YaST는 닫거나 그 로그인 화면을 계속할려면 <b>마침</b>을 선택 하십시요.\n" "</p>\n" -#. help 3/4 for dialog "Congratulation Dialog" -#: src/clients/firstboot_finish.rb:118 +#. help 3/4 for dialog "Congratulation Dialog" +#: src/clients/firstboot_finish.rb:118 msgid "" "<p>If you choose the default graphical desktop KDE, you can\n" "adjust some KDE settings to your hardware. Also notice\n" @@ -212,14 +209,12 @@ "<p>GUI KDE를 기본 데스크 탑으로 선택하려면 당신의 하드웨어에\n" "맞게 KDE를 설정해야 합니다. 역시 SuSE 환영 메시지에도 있습니다</p>\n" -#. help 4/4 for dialog "Congratulation Dialog" -#: src/clients/firstboot_finish.rb:128 +#. help 4/4 for dialog "Congratulation Dialog" +#: src/clients/firstboot_finish.rb:128 msgid "" "<p>If desired, experts can use the full range of SuSE's configuration\n" -"modules at this time. Check <b>Start YaST Control Center</b> and it will " -"start\n" -"after <b>Finish</b>. Note: The Control Center does not have a back button " -"to\n" +"modules at this time. Check <b>Start YaST Control Center</b> and it will start\n" +"after <b>Finish</b>. Note: The Control Center does not have a back button to\n" "return to this installation sequence.</p>\n" msgstr "" "<p>지금 전문가가 원하는 SuSE 설정 모듈의 전부를 이용할 수 있습니다.\n" @@ -228,8 +223,8 @@ "돌아오는 되돌아오기 버튼이 없습니다.\n" "</p>\n" -#. popup text -#: src/clients/firstboot_language.rb:123 +#. popup text +#: src/clients/firstboot_language.rb:123 msgid "" "Your language setting has been changed.\n" "\n" @@ -241,26 +236,26 @@ "필요하다면, 새로운 언어에 맞는 키보드 배열 설정을 할 수 있습니다.\n" "다음 로그인 때 키보드 배열 구성 도구를 사용하십시오." -#. ---------------------------------------------------------------------- -#. Build dialog -#. ---------------------------------------------------------------------- -#. heading text -#: src/clients/firstboot_language_keyboard.rb:72 +#. ---------------------------------------------------------------------- +#. Build dialog +#. ---------------------------------------------------------------------- +#. heading text +#: src/clients/firstboot_language_keyboard.rb:72 msgid "Language and Keyboard Layout" msgstr "언어 및 키보드 배열" -#. combo box label -#: src/clients/firstboot_language_keyboard.rb:78 +#. combo box label +#: src/clients/firstboot_language_keyboard.rb:78 msgid "&Language" msgstr "언어(&L)" -#. combo box label -#: src/clients/firstboot_language_keyboard.rb:86 +#. combo box label +#: src/clients/firstboot_language_keyboard.rb:86 msgid "&Keyboard Layout" msgstr "키보드 배열(&K)" -#. help text for firstboot language + keyboard screen -#: src/clients/firstboot_language_keyboard.rb:113 +#. help text for firstboot language + keyboard screen +#: src/clients/firstboot_language_keyboard.rb:113 msgid "" "<p>\n" "Choose the <b>Language</b> and the <b>Keyboard Layout</b> to be used during\n" @@ -272,8 +267,8 @@ "<b>키보드 배열</b>을 선택하십시오.\n" "</p>\n" -#. help text, continued -#: src/clients/firstboot_language_keyboard.rb:120 +#. help text, continued +#: src/clients/firstboot_language_keyboard.rb:120 msgid "" "<p>\n" "Click <b>Next</b> to proceed to the next dialog.\n" @@ -283,8 +278,8 @@ "다음 대화 상자로 넘어가려면 <b>다음</b>을 클릭하십시오.\n" " </p>\n" -#. help text, continued -#: src/clients/firstboot_language_keyboard.rb:126 +#. help text, continued +#: src/clients/firstboot_language_keyboard.rb:126 msgid "" "<p>\n" "Select <b>Abort</b> to abort the\n" @@ -296,33 +291,33 @@ "<b>중단</b>을 선택하십시오.\n" "</p>\n" -#. error message -#: src/clients/firstboot_language_keyboard.rb:265 +#. error message +#: src/clients/firstboot_language_keyboard.rb:265 msgid "There is not enough space to install all additional packages." msgstr "추가 패키지를 모두 설치할 공간이 부족합니다." -#. progress stages -#: src/clients/firstboot_write.rb:45 +#. progress stages +#: src/clients/firstboot_write.rb:45 msgid "Update configuration" msgstr "설정 업데이트" -#. progress stages -#: src/clients/firstboot_write.rb:47 +#. progress stages +#: src/clients/firstboot_write.rb:47 msgid "Prepare system for first login" msgstr "최초의 로그인을 위한 시스템 준비" -#. progress stages -#: src/clients/firstboot_write.rb:52 +#. progress stages +#: src/clients/firstboot_write.rb:52 msgid "Updating configuration..." msgstr "구성 업데이트 중..." -#. progress stages -#: src/clients/firstboot_write.rb:54 +#. progress stages +#: src/clients/firstboot_write.rb:54 msgid "Preparing system for first login..." msgstr "최초의 로그인을 위한 시스템 준비 중..." -#. Help text for last dialog of base installation -#: src/clients/firstboot_write.rb:59 +#. Help text for last dialog of base installation +#: src/clients/firstboot_write.rb:59 msgid "" "<p>\n" "Please wait while the system is being configured.\n" @@ -332,49 +327,49 @@ "시스템 설정이 구성될 때까지 기다려 주십시오.\n" "</p>" -#. Headline for last dialog of first boot workflow -#: src/clients/firstboot_write.rb:70 +#. Headline for last dialog of first boot workflow +#: src/clients/firstboot_write.rb:70 msgid "Completing the System Configuration" msgstr "시스템 구성 완료" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: modules/Firstboot.ycp -#. Package: Configuration of firstboot -#. Summary: Firstboot settings, input and output functions -#. Authors: Anas Nashif -#. -#. $Id$ -#. -#. Representation of the configuration of firstboot. -#. Input and output routines. -#: src/modules/Firstboot.rb:51 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: modules/Firstboot.ycp +#. Package: Configuration of firstboot +#. Summary: Firstboot settings, input and output functions +#. Authors: Anas Nashif +#. +#. $Id$ +#. +#. Representation of the configuration of firstboot. +#. Input and output routines. +#: src/modules/Firstboot.rb:51 msgid "No Text Available" msgstr "사용할 수 있는 텍스트 없음" -#. summary item -#: src/modules/Firstboot.rb:172 +#. summary item +#: src/modules/Firstboot.rb:172 msgid "Firstboot configuration disabled" msgstr "처음 부팅 구성이 비활성화됨" -#. summary item -#: src/modules/Firstboot.rb:175 +#. summary item +#: src/modules/Firstboot.rb:175 msgid "Firstboot configuration enabled" msgstr "처음 부팅 구성이 활성화됨" Modified: branches/SLE12-SP3/yast/ko/po/ftp-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ftp-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ftp-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,1280 +14,1256 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xftpd module -#: src/clients/ftp-server.rb:43 +#. Command line help text for the Xftpd module +#: src/clients/ftp-server.rb:43 msgid "Configuration of FTP server" msgstr "FTP 서버 구성" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:53 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:53 msgid "Display settings" msgstr "디스플레이 설정" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:59 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:59 msgid "Start-up settings" msgstr "시작 설정" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:70 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:70 msgid "Enable/disable chrooting." msgstr "chroot 활성화/비활성화." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:78 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:78 msgid "Saved log messages into the log file." msgstr "로그 메시지를 로그 파일에 저장했습니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:86 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:86 msgid "Umask vsftpd: <local users>:<anonymous>, pure-ftpd: <files>:<dirs>" -msgstr "" -"Umask vsftpd: <로컬 사용자>:<익명 사용자>, pure-ftpd: <파일>:<디렉토리>" +msgstr "Umask vsftpd: <로컬 사용자>:<익명 사용자>, pure-ftpd: <파일>:<디렉토리>" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:94 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:94 msgid "Enter the existing directory for anonymous users." msgstr "익명 사용자용 기존 디렉토리를 입력하십시오." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:102 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:102 msgid "Enter the existing directory for authenticated users (pure-ftpd only)." msgstr "인증 사용자에 대한 기존 디렉토리를 입력하십시오(pure-ftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:110 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:110 msgid "The port range for passive connection replies" msgstr "수동 연결 응답에 사용하는 포트 범위" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:118 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:118 msgid "The maximum idle time in minutes" msgstr "최대 유휴 시간(분)" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:126 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:126 msgid "The maximum number of clients connected via IP" msgstr "IP를 통해 연결된 최대 클라이언트 수" -#. TRANSLATORS: CommandLine help -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:134 src/clients/ftp-server.rb:317 +#. TRANSLATORS: CommandLine help +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:134 src/clients/ftp-server.rb:317 msgid "The maximum connected clients" msgstr "연결된 최대 클라이언트 수" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:142 -msgid "" -"The maximum data transfer rate permitted for local authenticated users (KB/s)" +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:142 +msgid "The maximum data transfer rate permitted for local authenticated users (KB/s)" msgstr "로컬 인증 사용자에 대해 허용된 최대 데이터 전송 속도(KB/s)" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:150 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:150 msgid "The maximum data transfer rate permitted for anonymous clients (KB/s)" msgstr "익명 클라이언트에 대해 허용된 최대 데이터 전송 속도(KB/s)" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:158 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:158 msgid "Access permissions" msgstr "액세스 권한" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:168 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:168 msgid "Access permissions for anonymous users" msgstr "익명 사용자의 액세스 권한" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:181 -msgid "" -"Welcome message is the text to display when someone connects to the server " -"(vsftpd only)." +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:181 +msgid "Welcome message is the text to display when someone connects to the server (vsftpd only)." msgstr "시작 메시지는 서버에 연결할 때 표시할 텍스트입니다(vsftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:190 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:190 msgid "vsftpd supports secure connections via SSL (vsftpd only)." msgstr "vsftpd는 SSL을 통한 보안 연결을 지원합니다(vsftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:199 -msgid "" -"If enabled, this option will permit SSL v2 protocol connections (vsftpd " -"only)." -msgstr "" -"활성화된 경우 이 옵션은 SSL v2 프로토콜 연결을 허용합니다(vsftpd만 해당)." +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:199 +msgid "If enabled, this option will permit SSL v2 protocol connections (vsftpd only)." +msgstr "활성화된 경우 이 옵션은 SSL v2 프로토콜 연결을 허용합니다(vsftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:208 -msgid "" -"If enabled, this option will permit SSL v3 protocol connections (vsftpd " -"only)." -msgstr "" -"활성화된 경우 이 옵션은 SSL v3 프로토콜 연결을 허용합니다(vsftpd만 해당)." +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:208 +msgid "If enabled, this option will permit SSL v3 protocol connections (vsftpd only)." +msgstr "활성화된 경우 이 옵션은 SSL v3 프로토콜 연결을 허용합니다(vsftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:217 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:217 msgid "vsftpd supports connections via TLS (vsftpd only)." msgstr "vsftpd는 TLS를 통한 연결을 지원합니다(vsftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:226 -msgid "" -"Disallow downloading of files that were uploaded but not validated by a " -"local admin (pure-ftpd only)." -msgstr "" -"업로드되었지만 로컬 관리자가 검증하지 않은 파일 다운로드를 허용하지 않습니다" -"(pure-ftpd만 해당)." +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:226 +msgid "Disallow downloading of files that were uploaded but not validated by a local admin (pure-ftpd only)." +msgstr "업로드되었지만 로컬 관리자가 검증하지 않은 파일 다운로드를 허용하지 않습니다(pure-ftpd만 해당)." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:235 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:235 msgid "Security settings for SSL and TLS protocol (pure-ftpd only)" msgstr "SSL 및 TLS 프로토콜의 보안 설정(pure-ftpd 전용)" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:244 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:244 msgid "Start FTP daemon in the boot process." msgstr "부팅 프로세스에서 FTP 데몬을 시작합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:250 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:250 msgid "Start FTP daemon manually." msgstr "수동으로 FTP 데몬을 시작합니다." -#. TRANSLATORS: CommandLine help -#. TRANSLATORS: CommandLine progress information -#: src/clients/ftp-server.rb:256 src/clients/ftp-server.rb:698 +#. TRANSLATORS: CommandLine help +#. TRANSLATORS: CommandLine progress information +#: src/clients/ftp-server.rb:256 src/clients/ftp-server.rb:698 msgid "Start FTP daemon via xinetd" msgstr "xinetd를 통해 FTP 데몬을 시작합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:262 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:262 msgid "Start xinetd if it is not running." msgstr "실행 중이 아닌 경우 xinetd를 시작합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:268 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:268 msgid "Enable option" msgstr "옵션 선택" -#. TRANSLATORS: CommandLine help -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:272 src/clients/ftp-server.rb:277 +#. TRANSLATORS: CommandLine help +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:272 src/clients/ftp-server.rb:277 msgid "Disable option" msgstr "옵션 선택 안 함" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:282 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:282 msgid "Directory for anonymous users" msgstr "익명 사용자용 디렉토리" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:289 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:289 msgid "Directory for authenticated users" msgstr "인증 사용자의 디렉토리" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:296 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:296 msgid "The minimum value for port range for passive connection replies" msgstr "수동 연결 응답에 대한 포트 범위의 최소값" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:303 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:303 msgid "The maximum value for port range for passive connection replies" msgstr "수동 연결 응답에 대한 포트 범위의 최대값" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:310 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:310 msgid "Maximum Idle Time (in minutes)" msgstr "최대 유휴 시간(분)" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:324 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:324 msgid "The maximum data transfer rate for ftp users (KB/s)" msgstr "ftp 사용자에 대한 최대 데이터 전송 속도(KB/s)" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:330 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:330 msgid "Access only for anonymous" msgstr "익명 사용자만 액세스" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:336 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:336 msgid "Access only for authenticated users" msgstr "인증 사용자만 액세스" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:342 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:342 msgid "Access for anonymous and authenticated users" msgstr "익명 및 인증 사용자의 액세스" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:348 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:348 msgid "Anonymous users can upload." msgstr "익명 사용자가 업로드할 수 있습니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:354 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:354 msgid "Anonymous users can create directories." msgstr "익명 사용자가 디렉토리를 생성할 수 있습니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:362 -msgid "" -"Welcome message is the text to display when someone connects to the server." +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:362 +msgid "Welcome message is the text to display when someone connects to the server." msgstr "시작 메시지는 서버에 연결할 때 표시할 텍스트입니다." -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:369 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:369 msgid "SSL version 2" msgstr "SSL 버전 2" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:374 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:374 msgid "SSL version 3" msgstr "SSL 버전 3" -#. TRANSLATORS: CommandLine help -#: src/clients/ftp-server.rb:379 +#. TRANSLATORS: CommandLine help +#: src/clients/ftp-server.rb:379 msgid "Refuse connections that do not use SSL/TLS security mechanisms." msgstr "SSL/TLS 보안 메커니즘을 사용하지 않는 연결을 거부합니다." -#. EOF -#: src/clients/ftp-server.rb:454 +#. EOF +#: src/clients/ftp-server.rb:454 msgid "Display Settings:" msgstr "디스플레이 설정:" -#. start-up settings -#. TRANSLATORS: CommandLine header -#. TRANSLATORS: CommandLine header -#. TRANSLATORS: CommandLine header -#: src/clients/ftp-server.rb:457 src/clients/ftp-server.rb:677 -#: src/clients/ftp-server.rb:686 src/clients/ftp-server.rb:695 +#. start-up settings +#. TRANSLATORS: CommandLine header +#. TRANSLATORS: CommandLine header +#. TRANSLATORS: CommandLine header +#: src/clients/ftp-server.rb:457 src/clients/ftp-server.rb:677 +#: src/clients/ftp-server.rb:686 src/clients/ftp-server.rb:695 msgid "Start-Up:" msgstr "시작:" -#: src/clients/ftp-server.rb:459 +#: src/clients/ftp-server.rb:459 msgid "FTP daemon is started via xinetd." msgstr "xinetd를 통해 FTP 데몬이 시작됩니다." -#. TRANSLATORS: CommandLine informative text -#: src/clients/ftp-server.rb:463 +#. TRANSLATORS: CommandLine informative text +#: src/clients/ftp-server.rb:463 msgid "FTP daemon is enabled in the boot process." msgstr "부팅 프로세스에서 FTP 데몬이 활성화됩니다." -#. TRANSLATORS: CommandLine informative text -#: src/clients/ftp-server.rb:466 +#. TRANSLATORS: CommandLine informative text +#: src/clients/ftp-server.rb:466 msgid "FTP daemon needs manual starting." msgstr "FTP 데몬에 수동 시작이 필요합니다." -#. logging settings -#: src/clients/ftp-server.rb:470 +#. logging settings +#: src/clients/ftp-server.rb:470 msgid "Verbose Logging:" msgstr "자세히 기록:" -#: src/clients/ftp-server.rb:472 src/clients/ftp-server.rb:481 +#: src/clients/ftp-server.rb:472 src/clients/ftp-server.rb:481 msgid "Enable" msgstr "활성화" -#. CommandLine::Print(""); -#. CommandLine::Print(""); -#: src/clients/ftp-server.rb:475 src/clients/ftp-server.rb:484 +#. CommandLine::Print(""); +#. CommandLine::Print(""); +#: src/clients/ftp-server.rb:475 src/clients/ftp-server.rb:484 msgid "Disable" msgstr "비활성화" -#. chroot settings -#: src/clients/ftp-server.rb:479 +#. chroot settings +#: src/clients/ftp-server.rb:479 msgid "Chroot Everyone:" msgstr "모든 사용자 루트 변경:" -#. UMASK settings -#: src/clients/ftp-server.rb:491 src/clients/ftp-server.rb:753 +#. UMASK settings +#: src/clients/ftp-server.rb:491 src/clients/ftp-server.rb:753 msgid "Umask for Anonymous: " msgstr "익명 사용자의 Umask: " -#: src/clients/ftp-server.rb:494 +#: src/clients/ftp-server.rb:494 msgid "Umask for Anonymous:" msgstr "익명 사용자의 Umask: " -#: src/clients/ftp-server.rb:495 src/clients/ftp-server.rb:503 -#: src/clients/ftp-server.rb:513 src/clients/ftp-server.rb:524 -#: src/clients/ftp-server.rb:532 src/clients/ftp-server.rb:541 -#: src/clients/ftp-server.rb:549 src/clients/ftp-server.rb:557 -#: src/clients/ftp-server.rb:565 src/clients/ftp-server.rb:573 -#: src/clients/ftp-server.rb:581 src/clients/ftp-server.rb:615 +#: src/clients/ftp-server.rb:495 src/clients/ftp-server.rb:503 +#: src/clients/ftp-server.rb:513 src/clients/ftp-server.rb:524 +#: src/clients/ftp-server.rb:532 src/clients/ftp-server.rb:541 +#: src/clients/ftp-server.rb:549 src/clients/ftp-server.rb:557 +#: src/clients/ftp-server.rb:565 src/clients/ftp-server.rb:573 +#: src/clients/ftp-server.rb:581 src/clients/ftp-server.rb:615 msgid "Option is not set now." msgstr "현재 옵션이 설정되어 있지 않습니다." -#. CommandLine::Print(""); -#: src/clients/ftp-server.rb:498 src/clients/ftp-server.rb:502 -#: src/clients/ftp-server.rb:755 +#. CommandLine::Print(""); +#: src/clients/ftp-server.rb:498 src/clients/ftp-server.rb:502 +#: src/clients/ftp-server.rb:755 msgid "Umask for Authenticated Users: " msgstr "인증 사용자의 Umask: " -#. CommandLine::Print(""); -#. CommandLine::Print(""); -#. part for pure-fptd -#: src/clients/ftp-server.rb:508 src/clients/ftp-server.rb:512 -#: src/clients/ftp-server.rb:783 +#. CommandLine::Print(""); +#. CommandLine::Print(""); +#. part for pure-fptd +#: src/clients/ftp-server.rb:508 src/clients/ftp-server.rb:512 +#: src/clients/ftp-server.rb:783 msgid "Umask: " msgstr "Umask:" -#. end of if (FtpServer::vsftpd_edit) -#. authenticated and anonymous dirs -#: src/clients/ftp-server.rb:520 +#. end of if (FtpServer::vsftpd_edit) +#. authenticated and anonymous dirs +#: src/clients/ftp-server.rb:520 msgid "Authenticated dir: " msgstr "인증 디렉토리: " -#: src/clients/ftp-server.rb:528 +#: src/clients/ftp-server.rb:528 msgid "Anonymous dir: " msgstr "익명 사용자 디렉토리: " -#. port range -#: src/clients/ftp-server.rb:535 +#. port range +#: src/clients/ftp-server.rb:535 msgid "Port Range: " msgstr "포트 범위:" -#: src/clients/ftp-server.rb:538 src/clients/ftp-server.rb:889 +#: src/clients/ftp-server.rb:538 src/clients/ftp-server.rb:889 msgid " - " msgstr " - " -#. idle time -#: src/clients/ftp-server.rb:545 +#. idle time +#: src/clients/ftp-server.rb:545 msgid "Maximum Idle Time [minutes]: " msgstr "최대 유휴 시간 [분]: " -#. maximum clients per IP -#: src/clients/ftp-server.rb:553 +#. maximum clients per IP +#: src/clients/ftp-server.rb:553 msgid "Maximum Clients per IP: " msgstr "IP당 최대 클라이언트 수: " -#. maximum clients -#: src/clients/ftp-server.rb:561 +#. maximum clients +#: src/clients/ftp-server.rb:561 msgid "Maximum Number of Clients: " msgstr "최대 클라이언트 수: " -#. max rate for authenticated users -#: src/clients/ftp-server.rb:569 +#. max rate for authenticated users +#: src/clients/ftp-server.rb:569 msgid "Maximum Rate for Authenticated Users [KB/s]: " msgstr "인증 사용자의 최대 전송 속도 [KB/s]: " -#. max rate for anonymous users -#: src/clients/ftp-server.rb:577 +#. max rate for anonymous users +#: src/clients/ftp-server.rb:577 msgid "Maximum Rate for Anonymous Users [KB/s]: " msgstr "익명 사용자의 최대 전송 속도 [KB/s]: " -#. general settings for access -#: src/clients/ftp-server.rb:585 +#. general settings for access +#: src/clients/ftp-server.rb:585 msgid "Access Allowed for: " msgstr "액세스 허용: " -#: src/clients/ftp-server.rb:587 +#: src/clients/ftp-server.rb:587 msgid "Anonymous Users" msgstr "익명 사용자" -#: src/clients/ftp-server.rb:589 +#: src/clients/ftp-server.rb:589 msgid "Authenticated Users" msgstr "인증 사용자" -#: src/clients/ftp-server.rb:591 +#: src/clients/ftp-server.rb:591 msgid "Anonymous and Authenticated Users" msgstr "익명 및 인증 사용자" -#: src/clients/ftp-server.rb:593 +#: src/clients/ftp-server.rb:593 msgid "Option has wrong value." msgstr "옵션 값이 잘못되었습니다." -#. access permissions for anonymous users -#: src/clients/ftp-server.rb:597 +#. access permissions for anonymous users +#: src/clients/ftp-server.rb:597 msgid "Access Permissions for Anonymous: " msgstr "익명 사용자의 액세스 권한:" -#: src/clients/ftp-server.rb:599 +#: src/clients/ftp-server.rb:599 msgid "Upload enabled; " msgstr "업로드 활성화:" -#: src/clients/ftp-server.rb:601 +#: src/clients/ftp-server.rb:601 msgid "Upload disabled; " msgstr "업로드 비활성화:" -#: src/clients/ftp-server.rb:604 +#: src/clients/ftp-server.rb:604 msgid "Create directories enabled" msgstr "활성화된 디렉토리 생성" -#: src/clients/ftp-server.rb:606 +#: src/clients/ftp-server.rb:606 msgid "Create directories disabled" msgstr "비활성화된 디렉토리 생성" -#. welcome message vsftpd only -#: src/clients/ftp-server.rb:611 +#. welcome message vsftpd only +#: src/clients/ftp-server.rb:611 msgid "Welcome message: " msgstr "시작 메시지:" -#. CommandLine::PrintNoCR(_("Security settings: ")); -#. SSL options (SSL version and TLS) -#: src/clients/ftp-server.rb:622 +#. CommandLine::PrintNoCR(_("Security settings: ")); +#. SSL options (SSL version and TLS) +#: src/clients/ftp-server.rb:622 msgid "SSL is disabled" msgstr "SSL이 사용 안 됨" -#: src/clients/ftp-server.rb:624 +#: src/clients/ftp-server.rb:624 msgid "SSL is enabled" msgstr "SSL이 사용됨" -#: src/clients/ftp-server.rb:628 +#: src/clients/ftp-server.rb:628 msgid "SSL version 2 is disabled" msgstr "SSL 버전 2가 사용 안 됨" -#: src/clients/ftp-server.rb:630 +#: src/clients/ftp-server.rb:630 msgid "SSL version 2 is enabled" msgstr "SSL 버전 2가 사용됨" -#: src/clients/ftp-server.rb:634 +#: src/clients/ftp-server.rb:634 msgid "SSL version 3 is disabled" msgstr "SSL 버전 3이 사용 안 됨" -#: src/clients/ftp-server.rb:636 +#: src/clients/ftp-server.rb:636 msgid "SSL version 3 is enabled" msgstr "SSL 버전 3이 사용됨" -#: src/clients/ftp-server.rb:640 +#: src/clients/ftp-server.rb:640 msgid "TLS is disabled" msgstr "TLS가 사용 안 됨" -#: src/clients/ftp-server.rb:642 +#: src/clients/ftp-server.rb:642 msgid "TLS is enabled" msgstr "TLS가 사용됨" -#. AntiWarez option -#: src/clients/ftp-server.rb:646 +#. AntiWarez option +#: src/clients/ftp-server.rb:646 msgid "Antiwarez: " msgstr "와레즈 방지: " -#: src/clients/ftp-server.rb:648 +#: src/clients/ftp-server.rb:648 msgid "Antiwarez enabled" msgstr "와레즈 방지 활성화됨" -#: src/clients/ftp-server.rb:650 +#: src/clients/ftp-server.rb:650 msgid "Antiwarez disabled" msgstr "와레즈 방지 비활성화됨" -#. SSL/TLS settings -#: src/clients/ftp-server.rb:653 +#. SSL/TLS settings +#: src/clients/ftp-server.rb:653 msgid "SSL/TLS settings: " msgstr "SSL/TLS 설정: " -#: src/clients/ftp-server.rb:655 +#: src/clients/ftp-server.rb:655 msgid "SSL/TLS disabled" msgstr "SSL/TLS가 사용 안 됨" -#: src/clients/ftp-server.rb:657 +#: src/clients/ftp-server.rb:657 msgid "SSL/TLS enabled" msgstr "SSL/TLS가 사용됨" -#: src/clients/ftp-server.rb:659 +#: src/clients/ftp-server.rb:659 msgid "Refuse connections without SSL/TLS" msgstr "SSL/TLS를 사용하지 않는 연결 거부" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:673 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:673 msgid "Only one parameter (atboot/manual) is allowed." msgstr "하나의 파라미터(atboot/manual)만 사용할 수 있습니다." -#. TRANSLATORS: CommandLine progress information -#: src/clients/ftp-server.rb:680 +#. TRANSLATORS: CommandLine progress information +#: src/clients/ftp-server.rb:680 msgid "Enabling FTP daemon in the boot process..." msgstr "부팅 프로세스에서 FTP 데몬을 활성화하는 중입니다." -#. TRANSLATORS: CommandLine progress information -#: src/clients/ftp-server.rb:689 +#. TRANSLATORS: CommandLine progress information +#: src/clients/ftp-server.rb:689 msgid "Removing FTP daemon from the boot process..." msgstr "부팅 프로세스에서 FTP 데몬을 제거하는 중입니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:712 src/clients/ftp-server.rb:726 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:712 src/clients/ftp-server.rb:726 msgid "Only one parameter (enable/disable) is allowed." msgstr "하나의 파라미터(enable/disable)만 사용할 수 있습니다." -#. end of else if (options["show"]:nil!=nil -#: src/clients/ftp-server.rb:741 +#. end of else if (options["show"]:nil!=nil +#: src/clients/ftp-server.rb:741 msgid "Umask:" msgstr "Umask:" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:745 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:745 msgid "Only one parameter (show/set_umask) is allowed." msgstr "하나의 파라미터(show/set_umask)만 사용할 수 있습니다." -#: src/clients/ftp-server.rb:761 src/clients/ftp-server.rb:770 -#: src/clients/ftp-server.rb:788 +#: src/clients/ftp-server.rb:761 src/clients/ftp-server.rb:770 +#: src/clients/ftp-server.rb:788 msgid "Entered umask is not valid." msgstr "입력한 umask가 잘못되었습니다." -#: src/clients/ftp-server.rb:763 src/clients/ftp-server.rb:772 +#: src/clients/ftp-server.rb:763 src/clients/ftp-server.rb:772 msgid "Example of correct umask <local users>:<anonymous> (177:077)" msgstr "올바른 umask <로컬 사용자>:<익명 사용자> 예(177:077)" -#: src/clients/ftp-server.rb:790 +#: src/clients/ftp-server.rb:790 msgid "Example of correct umask <files>:<dirs> (set_umask=177:077)" msgstr "올바른 umask <파일>:<디렉토리> 예(set_umask=177:077)" -#. end of if (vsftpd_edit) -#: src/clients/ftp-server.rb:803 +#. end of if (vsftpd_edit) +#: src/clients/ftp-server.rb:803 msgid "Anonymous users:" msgstr "익명 사용자:" -#: src/clients/ftp-server.rb:809 +#: src/clients/ftp-server.rb:809 msgid "Anonymous directory:" msgstr "익명 사용자 디렉토리:" -#: src/clients/ftp-server.rb:814 src/clients/ftp-server.rb:844 +#: src/clients/ftp-server.rb:814 src/clients/ftp-server.rb:844 msgid "Option is empty." msgstr "옵션이 비어 있습니다." -#: src/clients/ftp-server.rb:816 +#: src/clients/ftp-server.rb:816 msgid "Example of correct input set_anon_dir=/srv/ftp" msgstr "올바른 입력의 예 set_anon_dir=/srv/ftp" -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:823 src/clients/ftp-server.rb:853 -#: src/clients/ftp-server.rb:935 src/clients/ftp-server.rb:1027 -#: src/clients/ftp-server.rb:1100 src/clients/ftp-server.rb:1151 -#: src/clients/ftp-server.rb:1241 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:823 src/clients/ftp-server.rb:853 +#: src/clients/ftp-server.rb:935 src/clients/ftp-server.rb:1027 +#: src/clients/ftp-server.rb:1100 src/clients/ftp-server.rb:1151 +#: src/clients/ftp-server.rb:1241 msgid "Only one parameter is allowed." msgstr "하나의 파라미터만 사용할 수 있습니다." -#: src/clients/ftp-server.rb:832 +#: src/clients/ftp-server.rb:832 msgid "Authenticated users:" msgstr "인증 사용자:" -#: src/clients/ftp-server.rb:839 +#: src/clients/ftp-server.rb:839 msgid "Authenticated directory:" msgstr "인증 디렉토리:" -#: src/clients/ftp-server.rb:846 +#: src/clients/ftp-server.rb:846 msgid "Example of correct input set_authen_dir=/srv/ftp" msgstr "올바른 입력의 예 set_authen_dir=/srv/ftp" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:858 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:858 msgid "Option is not supported in pure-ftpd server." msgstr "pure-ftpd 서버에서 지원하지 않는 옵션입니다." -#: src/clients/ftp-server.rb:867 +#: src/clients/ftp-server.rb:867 msgid "Port range:" msgstr "포트 범위:" -#: src/clients/ftp-server.rb:885 +#: src/clients/ftp-server.rb:885 msgid "Port range for passive mode: " msgstr "수동 모드의 포트 범위: " -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:894 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:894 msgid "Enter minimal port < maximal port." msgstr "최소 포트 < 최대 포트를 입력하십시오." -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:899 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:899 msgid "Enter correct numbers." msgstr "올바른 숫자를 입력하십시오." -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:904 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:904 msgid "Only two parameters are allowed." msgstr "두 개의 파라미터만 사용할 수 있습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:929 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:929 msgid "Wrong value of option." msgstr "옵션 값이 잘못되었습니다." -#: src/clients/ftp-server.rb:1004 +#: src/clients/ftp-server.rb:1004 msgid "Access (Anonymous/Authenticated):" msgstr "액세스(익명/인증):" -#: src/clients/ftp-server.rb:1008 +#: src/clients/ftp-server.rb:1008 msgid "Access allowed for: " msgstr "액세스 허용: " -#: src/clients/ftp-server.rb:1011 +#: src/clients/ftp-server.rb:1011 msgid "Anonymous users" msgstr "익명 사용자" -#: src/clients/ftp-server.rb:1014 +#: src/clients/ftp-server.rb:1014 msgid "Authenticated users" msgstr "인증 사용자" -#: src/clients/ftp-server.rb:1017 +#: src/clients/ftp-server.rb:1017 msgid "Anonymous and authenticated users" msgstr "익명 및 인증 사용자" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1020 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1020 msgid "Unknown option." msgstr "알 수 없는 옵션입니다." -#: src/clients/ftp-server.rb:1040 +#: src/clients/ftp-server.rb:1040 msgid "Access permission for anonymous users:" msgstr "익명 사용자의 액세스 권한:" -#: src/clients/ftp-server.rb:1047 +#: src/clients/ftp-server.rb:1047 msgid "Upload enabled" msgstr "업로드 허용" -#: src/clients/ftp-server.rb:1050 +#: src/clients/ftp-server.rb:1050 msgid "Upload disabled" msgstr "업로드 금지" -#: src/clients/ftp-server.rb:1052 +#: src/clients/ftp-server.rb:1052 msgid "; " msgstr "; " -#: src/clients/ftp-server.rb:1055 +#: src/clients/ftp-server.rb:1055 msgid "Create dirs enabled" msgstr "디렉토리 생성 허용" -#: src/clients/ftp-server.rb:1058 +#: src/clients/ftp-server.rb:1058 msgid "Create dirs disabled" msgstr "디렉토리 생성 금지" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1062 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1062 msgid "Only one or two parameters are allowed." msgstr "하나 또는 두 개의 파라미터만 허용됩니다." -#: src/clients/ftp-server.rb:1075 +#: src/clients/ftp-server.rb:1075 msgid "Welcome Message:" msgstr "시작 메시지:" -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1079 src/clients/ftp-server.rb:1120 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1079 src/clients/ftp-server.rb:1120 msgid "This option is allowed only in vsftpd." msgstr "이 옵션은 vsftpd에서만 사용할 수 있습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1094 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1094 msgid "Missing value of option" msgstr "옵션 값이 없습니다." -#: src/clients/ftp-server.rb:1103 +#: src/clients/ftp-server.rb:1103 msgid "Example of correct input: welcome_message=\"Hello everybody\"" msgstr "올바른 입력 예: welcome_message=\"Hello everybody\"" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1127 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1127 msgid "This option is allowed only in pure-ftpd." msgstr "이 옵션은 pure-ftpd에서만 사용할 수 있습니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1145 src/clients/ftp-server.rb:1235 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1145 src/clients/ftp-server.rb:1235 msgid "Wrong option." msgstr "잘못된 옵션입니다." -#: src/clients/ftp-server.rb:1211 +#: src/clients/ftp-server.rb:1211 msgid "Security Settings:" msgstr "보안 설정:" -#. TRANSLATORS: CommandLine error message -#: src/clients/ftp-server.rb:1215 +#. TRANSLATORS: CommandLine error message +#: src/clients/ftp-server.rb:1215 msgid "This option is allowed only in pure-ftp-server." msgstr "이 옵션은 pure-ftpd-server에서만 사용할 수 있습니다." -#: src/clients/ftp-server.rb:1222 +#: src/clients/ftp-server.rb:1222 msgid "SSL and TLS are enabled" msgstr "SSL 및 TLS 사용됨" -#: src/clients/ftp-server.rb:1227 +#: src/clients/ftp-server.rb:1227 msgid "SSL and TLS are disabled" msgstr "SSL 및 TLS 사용되지 않음" -#: src/clients/ftp-server.rb:1231 +#: src/clients/ftp-server.rb:1231 msgid "Refuse connection without SSL/TLS" msgstr "SSL/TLS를 사용하지 않는 연결 거부" -#: src/clients/ftp-server.rb:1244 +#: src/clients/ftp-server.rb:1244 msgid "Example of correct input: SSL_TLS enable/disable/only" msgstr "올바른 입력 예: SSL_TLS enable/disable/only" -#. Checking if ftp daemons are installed -#: src/include/ftp-server/complex.rb:70 +#. Checking if ftp daemons are installed +#: src/include/ftp-server/complex.rb:70 msgid "Packages for vsftpd and pure-ftpd are not available." msgstr "vsftpd 및 pure-ftpd 패키지를 사용할 수 없습니다." -#. end of `VBox( -#: src/include/ftp-server/complex.rb:82 +#. end of `VBox( +#: src/include/ftp-server/complex.rb:82 msgid "No server package installed." msgstr "서버 패키지가 설치되어 있지 않습니다." -#: src/include/ftp-server/complex.rb:83 +#: src/include/ftp-server/complex.rb:83 msgid "Choose an FTP daemon." msgstr "FTP 데몬을 선택하십시오." -#: src/include/ftp-server/complex.rb:84 +#: src/include/ftp-server/complex.rb:84 msgid "Press Cancel to cancel FTP configuration." msgstr "[취소]를 눌러 FTP 구성을 취소하십시오." -#: src/include/ftp-server/complex.rb:85 src/include/ftp-server/complex.rb:196 -#: src/include/ftp-server/dialogs.rb:315 +#: src/include/ftp-server/complex.rb:85 src/include/ftp-server/complex.rb:196 +#: src/include/ftp-server/dialogs.rb:315 msgid "&vsftpd" msgstr "vsftpd(&V)" -#: src/include/ftp-server/complex.rb:86 src/include/ftp-server/complex.rb:204 +#: src/include/ftp-server/complex.rb:86 src/include/ftp-server/complex.rb:204 msgid "&pure-ftpd" msgstr "pure-ftpd(&P)" -#. result = Package::Available(daemon); -#: src/include/ftp-server/complex.rb:134 +#. result = Package::Available(daemon); +#: src/include/ftp-server/complex.rb:134 msgid "Installation failed." msgstr "설치 실패." -#: src/include/ftp-server/complex.rb:146 +#: src/include/ftp-server/complex.rb:146 msgid "Package for FTP is not available." msgstr "FTP용 패키지를 사용할 수 없습니다." -#: src/include/ftp-server/complex.rb:150 +#: src/include/ftp-server/complex.rb:150 msgid "Package not found." msgstr "패키지를 찾을 수 없습니다." -#. open dialog for choosing ftp daemon -#: src/include/ftp-server/complex.rb:191 +#. open dialog for choosing ftp daemon +#: src/include/ftp-server/complex.rb:191 msgid "Choose daemon?" msgstr "데몬을 선택하시겠습니까?" -#. TRANSLATORS: popup headline -#: src/include/ftp-server/dialogs.rb:150 +#. TRANSLATORS: popup headline +#: src/include/ftp-server/dialogs.rb:150 msgid "Aborting FTP Configuration" msgstr "FTP 구성 중단 중" -#. TRANSLATORS: popup message -#: src/include/ftp-server/dialogs.rb:152 +#. TRANSLATORS: popup message +#: src/include/ftp-server/dialogs.rb:152 msgid "All changes will be lost. Really abort configuration?" msgstr "모든 변경 사항이 유실됩니다. 구성을 중단하시겠습니까?" -#. TRANSLATORS: Radio selection -#: src/include/ftp-server/dialogs.rb:188 +#. TRANSLATORS: Radio selection +#: src/include/ftp-server/dialogs.rb:188 msgid "&When booting" msgstr "부팅 시(&W)" -#: src/include/ftp-server/dialogs.rb:189 +#: src/include/ftp-server/dialogs.rb:189 msgid "&Manually" msgstr "수동으로(&M)" -#: src/include/ftp-server/dialogs.rb:190 +#: src/include/ftp-server/dialogs.rb:190 msgid "Via &xinetd" msgstr "xinetd 사용(&X)" -#: src/include/ftp-server/dialogs.rb:196 +#: src/include/ftp-server/dialogs.rb:196 msgid "When Booting" msgstr "부팅 시" -#: src/include/ftp-server/dialogs.rb:197 +#: src/include/ftp-server/dialogs.rb:197 msgid "Manually" msgstr "수동으로" -#: src/include/ftp-server/dialogs.rb:198 +#: src/include/ftp-server/dialogs.rb:198 msgid "Via xinetd" msgstr "xinetd 사용" -#. Init function where are added UI hadle functions -#. Start widget -#. -#. @return [Hash{String => Object}] map for start-stop widget -#. Init function where are added UI hadle functions -#. Start widget (pure-ftpd) -#. -#. @return [Hash{String => Object}] map for start-stop widget -#. Function start vsftpd -#. write settings to disk... -#. Function start pure-ftpd -#. write settings to disk... -#. Init function for start-up -#. -#. init starting via xinetd and update status -#: src/include/ftp-server/dialogs.rb:212 -#: src/include/ftp-server/dialogs.rb:261 -#: src/include/ftp-server/wid_functions.rb:173 -#: src/include/ftp-server/wid_functions.rb:263 -#: src/include/ftp-server/wid_functions.rb:317 -#: src/include/ftp-server/wid_functions.rb:408 -#: src/include/ftp-server/wid_functions.rb:502 -#: src/include/ftp-server/wid_functions.rb:511 +#. Init function where are added UI hadle functions +#. Start widget +#. +#. @return [Hash{String => Object}] map for start-stop widget +#. Init function where are added UI hadle functions +#. Start widget (pure-ftpd) +#. +#. @return [Hash{String => Object}] map for start-stop widget +#. Function start vsftpd +#. write settings to disk... +#. Function start pure-ftpd +#. write settings to disk... +#. Init function for start-up +#. +#. init starting via xinetd and update status +#: src/include/ftp-server/dialogs.rb:212 src/include/ftp-server/dialogs.rb:261 +#: src/include/ftp-server/wid_functions.rb:173 +#: src/include/ftp-server/wid_functions.rb:263 +#: src/include/ftp-server/wid_functions.rb:317 +#: src/include/ftp-server/wid_functions.rb:408 +#: src/include/ftp-server/wid_functions.rb:502 +#: src/include/ftp-server/wid_functions.rb:511 msgid "FTP is running" msgstr "FTP가 실행 중입니다." -#. UpdateInfoAboutStartingFTP (); -#. Popup::Message(_("This is not supported via xinetd now.")); -#: src/include/ftp-server/dialogs.rb:213 -#: src/include/ftp-server/dialogs.rb:262 -#: src/include/ftp-server/wid_functions.rb:214 -#: src/include/ftp-server/wid_functions.rb:359 +#. UpdateInfoAboutStartingFTP (); +#. Popup::Message(_("This is not supported via xinetd now.")); +#: src/include/ftp-server/dialogs.rb:213 src/include/ftp-server/dialogs.rb:262 +#: src/include/ftp-server/wid_functions.rb:214 +#: src/include/ftp-server/wid_functions.rb:359 msgid "FTP is not running" msgstr "FTP가 실행 중이 아닙니다." -#: src/include/ftp-server/dialogs.rb:214 -#: src/include/ftp-server/dialogs.rb:263 +#: src/include/ftp-server/dialogs.rb:214 src/include/ftp-server/dialogs.rb:263 msgid "&Start FTP Now" msgstr "지금 FTP 시작(&S)" -#: src/include/ftp-server/dialogs.rb:215 -#: src/include/ftp-server/dialogs.rb:264 +#: src/include/ftp-server/dialogs.rb:215 src/include/ftp-server/dialogs.rb:264 msgid "S&top FTP Now" msgstr "지금 FTP 중지(&T)" -#: src/include/ftp-server/dialogs.rb:224 -#: src/include/ftp-server/dialogs.rb:273 +#: src/include/ftp-server/dialogs.rb:224 src/include/ftp-server/dialogs.rb:273 msgid "Sa&ve Settings and Restart FTP Now" msgstr "설정 저장 및 FTP 다시 시작(&V)" -#. part of help text - push button label, NO SHORTCUT!!! -#. part of help text - push button label, NO SHORTCUT!!! -#: src/include/ftp-server/dialogs.rb:242 -#: src/include/ftp-server/dialogs.rb:291 +#. part of help text - push button label, NO SHORTCUT!!! +#. part of help text - push button label, NO SHORTCUT!!! +#: src/include/ftp-server/dialogs.rb:242 src/include/ftp-server/dialogs.rb:291 msgid "Start FTP Daemon Now" msgstr "지금 FTP 데몬 시작" -#. part of help text - push button label, NO SHORTCUT!!! -#. part of help text - push button label, NO SHORTCUT!!! -#: src/include/ftp-server/dialogs.rb:244 -#: src/include/ftp-server/dialogs.rb:293 +#. part of help text - push button label, NO SHORTCUT!!! +#. part of help text - push button label, NO SHORTCUT!!! +#: src/include/ftp-server/dialogs.rb:244 src/include/ftp-server/dialogs.rb:293 msgid "Stop FTP Daemon Now" msgstr "지금 FTP 데몬 중지" -#. part of help text - push button label, NO SHORTCUT!!! -#. part of help text - push button label, NO SHORTCUT!!! -#: src/include/ftp-server/dialogs.rb:246 -#: src/include/ftp-server/dialogs.rb:295 +#. part of help text - push button label, NO SHORTCUT!!! +#. part of help text - push button label, NO SHORTCUT!!! +#: src/include/ftp-server/dialogs.rb:246 src/include/ftp-server/dialogs.rb:295 msgid "Save Settings and Restart FTP Daemon Now" msgstr "지금 설정 저장 및 FTP 데몬 다시 시작" -#. Init function where are added UI hadle functions -#. Start widget radiobuttons for switching daemons -#. -#. @return [Hash{String => Object}] map for start-stop widget -#: src/include/ftp-server/dialogs.rb:310 +#. Init function where are added UI hadle functions +#. Start widget radiobuttons for switching daemons +#. +#. @return [Hash{String => Object}] map for start-stop widget +#: src/include/ftp-server/dialogs.rb:310 msgid "Selected Service" msgstr "선택한 서비스" -#: src/include/ftp-server/dialogs.rb:315 +#: src/include/ftp-server/dialogs.rb:315 msgid "p&ure-ftpd" msgstr "pure-ftpd(&U)" -#. -----------================= GENERAL SCREEN =============---------- -#. -#. Wellcome Message for vsftpd -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:364 +#. -----------================= GENERAL SCREEN =============---------- +#. +#. Wellcome Message for vsftpd +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:364 msgid "&Welcome message" msgstr "시작 메시지(&W)" -#. Chroot Everyone -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:391 +#. Chroot Everyone +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:391 msgid "&Chroot Everyone" msgstr "모든 사용자의 루트 변경(&C)" -#. Verbos Logging -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:422 +#. Verbos Logging +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:422 msgid "&Verbose Logging" msgstr "자세히 기록(&V)" -#. Umask (umask files:umask dirs) only pure-ftpd -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:454 +#. Umask (umask files:umask dirs) only pure-ftpd +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:454 msgid "&Umask (umask files:umask dirs)" msgstr "Umask (umask files:umask dirs)(&U)" -#. Umask for Anonynous for vsftpd -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:488 +#. Umask for Anonynous for vsftpd +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:488 msgid "&Umask for Anonymous" msgstr "익명 Umask(&U)" -#. Umask for Authenticated Users for vsftpd -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:519 +#. Umask for Authenticated Users for vsftpd +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:519 msgid "Uma&sk for Authenticated Users" msgstr "인증 사용자의 Umask(&S)" -#. Ftp Directory for Anonymous Users -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:547 +#. Ftp Directory for Anonymous Users +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:547 msgid "FTP Directory for Anon&ymous Users" msgstr "익명 사용자에 대한 FTP 디렉토리(&Y)" -#. "Browse" button for FTP Dir Anon -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:582 +#. "Browse" button for FTP Dir Anon +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:582 msgid "Brows&e" msgstr "찾아보기(&E)" -#: src/include/ftp-server/dialogs.rb:589 -#: src/include/ftp-server/dialogs.rb:644 -#: src/include/ftp-server/dialogs.rb:1220 +#: src/include/ftp-server/dialogs.rb:589 src/include/ftp-server/dialogs.rb:644 +#: src/include/ftp-server/dialogs.rb:1220 msgid " " msgstr " " -#. Ftp Directory for Authenticated Users -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#: src/include/ftp-server/dialogs.rb:604 +#. Ftp Directory for Authenticated Users +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#: src/include/ftp-server/dialogs.rb:604 msgid "&FTP Directory for Authenticated Users" msgstr "인증 사용자에 대한 FTP 디렉토리(&F)" -#. "Browse" button for FTP Dir Local/Authenticated -#. General Settings widget -#. -#. @return [Hash{String => Object}] map for General screen -#. "Browse" button for RSA Certificate -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:637 -#: src/include/ftp-server/dialogs.rb:1213 +#. "Browse" button for FTP Dir Local/Authenticated +#. General Settings widget +#. +#. @return [Hash{String => Object}] map for General screen +#. "Browse" button for RSA Certificate +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:637 +#: src/include/ftp-server/dialogs.rb:1213 msgid "Br&owse" msgstr "찾아보기(&O)" -#. -----------================= PERFORMANCE SCREEN =============---------- -#. -#. Max Idle Time [minutes] -#. Performance Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:663 +#. -----------================= PERFORMANCE SCREEN =============---------- +#. +#. Max Idle Time [minutes] +#. Performance Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:663 msgid "&Max Idle Time [minutes]" msgstr "최대 유휴 시간 [분](&M)" -#. Max Clients for One IP -#. Performance Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:699 +#. Max Clients for One IP +#. Performance Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:699 msgid "Max Cli&ents for One IP" msgstr "IP당 최대 클라이언트 수(&E)" -#. Max Clients -#. Performance Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:732 +#. Max Clients +#. Performance Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:732 msgid "Ma&x Clients" msgstr "최대 클라이언트 수(&X)" -#. Local Max Rate [KB/s] -#. Performance Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:765 +#. Local Max Rate [KB/s] +#. Performance Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:765 msgid "&Local Max Rate [KB/s]" msgstr "최대 로컬 전송 속도 [KB/s](&L)" -#. Anonymous Max Rate [KB/s] -#. Performance Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:798 +#. Anonymous Max Rate [KB/s] +#. Performance Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:798 msgid "Anonymous Max &Rate [KB/s]" msgstr "익명 사용자 최대 전송 속도 [KB/s](&R)" -#. -----------================= Authentication SCREEN =============---------- -#. -#. Enable/Disable Anonymous and Local Users -#. Authentication Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:836 +#. -----------================= Authentication SCREEN =============---------- +#. +#. Enable/Disable Anonymous and Local Users +#. Authentication Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:836 msgid "Enable/Disable Anonymous and Local Users" msgstr "익명 및 로컬 사용자 활성화/비활성화" -#: src/include/ftp-server/dialogs.rb:842 +#: src/include/ftp-server/dialogs.rb:842 msgid "Anonymo&us Only" msgstr "익명 사용자 전용(&U)" -#: src/include/ftp-server/dialogs.rb:843 +#: src/include/ftp-server/dialogs.rb:843 msgid "Aut&henticated Users Only" msgstr "인증 사용자 전용(&H)" -#: src/include/ftp-server/dialogs.rb:844 +#: src/include/ftp-server/dialogs.rb:844 msgid "&Both" msgstr "둘 다(&B)" -#. Enable Upload -#. Authentication Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:872 +#. Enable Upload +#. Authentication Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:872 msgid "&Enable Upload" msgstr "업로드 활성화(&E)" -#. Anonymous Can Upload -#. Authentication Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:903 +#. Anonymous Can Upload +#. Authentication Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:903 msgid "Anon&ymous Can Upload" msgstr "익명 사용자가 업로드할 수 있음(&Y)" -#. Anonymous Can Create Directories -#. Authentication Settings widget -#. -#. @return [Hash{String => Object}] map for Performance screen -#: src/include/ftp-server/dialogs.rb:935 +#. Anonymous Can Create Directories +#. Authentication Settings widget +#. +#. @return [Hash{String => Object}] map for Performance screen +#: src/include/ftp-server/dialogs.rb:935 msgid "Anonymou&s Can Create Directories" msgstr "익명 사용자가 디렉토리를 생성할 수 있음(&S)" -#. -----------================= EXPERT SETTINGS SCREEN =============---------- -#. -#. Enable Pass&ive Mode -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:970 +#. -----------================= EXPERT SETTINGS SCREEN =============---------- +#. +#. Enable Pass&ive Mode +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:970 msgid "Enable Pass&ive Mode" msgstr "수동 모드 활성화(&I)" -#. Min Port for Pas. Mode -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1001 +#. Min Port for Pas. Mode +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1001 msgid "&Min Port for Pas. Mode" msgstr "수동 모드의 최소 포트 번호(&M)" -#. Max Port for Pas. Mode -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1033 +#. Max Port for Pas. Mode +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1033 msgid "Max P&ort for Pas. Mode" msgstr "수동 모드의 최대 포트 번호(&O)" -#. Enable SSL -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#. end of `Frame ( "Passiv Mode Settings" -#: src/include/ftp-server/dialogs.rb:1071 -#: src/include/ftp-server/dialogs.rb:1652 +#. Enable SSL +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#. end of `Frame ( "Passiv Mode Settings" +#: src/include/ftp-server/dialogs.rb:1071 +#: src/include/ftp-server/dialogs.rb:1652 msgid "Enab&le SSL" msgstr "SSL 사용(&L)" -#. Enable SSL v2 -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1097 +#. Enable SSL v2 +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1097 msgid "&Enable SSL v2" msgstr "SSL v2 사용(&E)" -#. Enable SSL v3 -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1126 +#. Enable SSL v3 +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1126 msgid "Enable SSL &v3" msgstr "SSL v3 사용(&V)" -#. Enable TLS -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1155 +#. Enable TLS +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1155 msgid "Enable &TLS" msgstr "TLS 사용(&T)" -#. RSA Certificate to Use for SSL Encrypted Connections -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1183 +#. RSA Certificate to Use for SSL Encrypted Connections +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1183 msgid "D&SA Certificate to Use for SSL-encrypted Connections" msgstr "SSL 암호화된 연결에 사용할 DSA 인증서(&S)" -#. Disable Downloading Unvalidated Data -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1237 +#. Disable Downloading Unvalidated Data +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1237 msgid "Disable Downloading &Unvalidated Data" msgstr "확인되지 않은 데이터 다운로드 금지(&U)" -#. Security Settings -#. Expert Settings widget -#. -#. @return [Hash{String => Object}] map for Expert screen -#: src/include/ftp-server/dialogs.rb:1264 +#. Security Settings +#. Expert Settings widget +#. +#. @return [Hash{String => Object}] map for Expert screen +#: src/include/ftp-server/dialogs.rb:1264 msgid "Security Settings" msgstr "보안 설정" -#: src/include/ftp-server/dialogs.rb:1270 +#: src/include/ftp-server/dialogs.rb:1270 msgid "Disable SSL/&TLS" msgstr "SSL/TLS 사용 안 함(&T)" -#: src/include/ftp-server/dialogs.rb:1271 +#: src/include/ftp-server/dialogs.rb:1271 msgid "Accept &SSL and TLS" msgstr "SSL 및 TLS 허용(&S)" -#: src/include/ftp-server/dialogs.rb:1272 +#: src/include/ftp-server/dialogs.rb:1272 msgid "&Refuse Connections Without SSL/TLS" msgstr "SSL/TLS가 없는 연결 거부(&R)" -#. TRANSLATORS: part of dialog caption -#: src/include/ftp-server/dialogs.rb:1320 +#. TRANSLATORS: part of dialog caption +#: src/include/ftp-server/dialogs.rb:1320 msgid "FTP Start-up" msgstr "FTP 시작" -#. TRANSLATORS: tree menu item -#: src/include/ftp-server/dialogs.rb:1322 +#. TRANSLATORS: tree menu item +#: src/include/ftp-server/dialogs.rb:1322 msgid "Start-Up" msgstr "시작" -#. Init function where are added UI hadle functions -#. General Settings widget (vsftpd) -#. define for tabs_vsftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for General Settings widget -#. Init function where are added UI hadle functions -#. General Settings widget (pure-ftpd) -#. define for tabs_pureftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for General Settings widget -#. Init function where are added UI hadle functions -#. Performance Settings widget -#. define for tabs_vsftpd/tabs_pureftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for Performance Settings widget -#: src/include/ftp-server/dialogs.rb:1346 -#: src/include/ftp-server/dialogs.rb:1420 -#: src/include/ftp-server/dialogs.rb:1473 +#. Init function where are added UI hadle functions +#. General Settings widget (vsftpd) +#. define for tabs_vsftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for General Settings widget +#. Init function where are added UI hadle functions +#. General Settings widget (pure-ftpd) +#. define for tabs_pureftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for General Settings widget +#. Init function where are added UI hadle functions +#. Performance Settings widget +#. define for tabs_vsftpd/tabs_pureftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for Performance Settings widget +#: src/include/ftp-server/dialogs.rb:1346 +#: src/include/ftp-server/dialogs.rb:1420 +#: src/include/ftp-server/dialogs.rb:1473 msgid "General Settings" msgstr "일반 설정" -#: src/include/ftp-server/dialogs.rb:1359 -#: src/include/ftp-server/dialogs.rb:1428 -#: src/include/ftp-server/dialogs.rb:1485 +#: src/include/ftp-server/dialogs.rb:1359 +#: src/include/ftp-server/dialogs.rb:1428 +#: src/include/ftp-server/dialogs.rb:1485 msgid "FTP Directories" msgstr "FTP 디렉토리" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: part of dialog caption -#: src/include/ftp-server/dialogs.rb:1384 -#: src/include/ftp-server/dialogs.rb:1446 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: part of dialog caption +#: src/include/ftp-server/dialogs.rb:1384 +#: src/include/ftp-server/dialogs.rb:1446 msgid "FTP General Settings" msgstr "FTP 일반 설정" -#. TRANSLATORS: tree menu item -#. TRANSLATORS: tree menu item -#: src/include/ftp-server/dialogs.rb:1386 -#: src/include/ftp-server/dialogs.rb:1448 +#. TRANSLATORS: tree menu item +#. TRANSLATORS: tree menu item +#: src/include/ftp-server/dialogs.rb:1386 +#: src/include/ftp-server/dialogs.rb:1448 msgid "General" msgstr "일반" -#. TRANSLATORS: part of dialog caption -#: src/include/ftp-server/dialogs.rb:1498 +#. TRANSLATORS: part of dialog caption +#: src/include/ftp-server/dialogs.rb:1498 msgid "FTP Performance Settings" msgstr "FTP 성능 설정" -#. TRANSLATORS: tree menu item -#: src/include/ftp-server/dialogs.rb:1500 +#. TRANSLATORS: tree menu item +#: src/include/ftp-server/dialogs.rb:1500 msgid "Performance" msgstr "성능" -#. Init function where are added UI hadle functions -#. Anonymous Settings widget -#. define for tabs_vsftpd/tabs_pureftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for Anonymous Settings widget -#. Init function where are added UI hadle functions -#. Anonymous Settings widget -#. define for tabs_vsftpd/tabs_pureftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for Anonymous Settings widget -#: src/include/ftp-server/dialogs.rb:1562 -#: src/include/ftp-server/dialogs.rb:1597 +#. Init function where are added UI hadle functions +#. Anonymous Settings widget +#. define for tabs_vsftpd/tabs_pureftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for Anonymous Settings widget +#. Init function where are added UI hadle functions +#. Anonymous Settings widget +#. define for tabs_vsftpd/tabs_pureftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for Anonymous Settings widget +#: src/include/ftp-server/dialogs.rb:1562 +#: src/include/ftp-server/dialogs.rb:1597 msgid "Uploading" msgstr "업로드" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: part of dialog caption -#: src/include/ftp-server/dialogs.rb:1569 -#: src/include/ftp-server/dialogs.rb:1613 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: part of dialog caption +#: src/include/ftp-server/dialogs.rb:1569 +#: src/include/ftp-server/dialogs.rb:1613 msgid "FTP Anonymous Settings" msgstr "FTP 익명 사용자 설정" -#. TRANSLATORS: tree menu item -#. TRANSLATORS: tree menu item -#: src/include/ftp-server/dialogs.rb:1571 -#: src/include/ftp-server/dialogs.rb:1615 +#. TRANSLATORS: tree menu item +#. TRANSLATORS: tree menu item +#: src/include/ftp-server/dialogs.rb:1571 +#: src/include/ftp-server/dialogs.rb:1615 msgid "Authentication" msgstr "인증" -#. Init function where are added UI hadle functions -#. Expert Settings widget (vsftpd) -#. define for tabs_vsftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for Expert Settings widget -#. Init function where are added UI hadle functions -#. Expert Settings widget (pure-ftpd) -#. define for tabs_pureftpd necessary later in screens (CWNTree) -#. -#. @return [Hash{String => Object}] map for Expert Settings widget -#: src/include/ftp-server/dialogs.rb:1638 -#: src/include/ftp-server/dialogs.rb:1712 +#. Init function where are added UI hadle functions +#. Expert Settings widget (vsftpd) +#. define for tabs_vsftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for Expert Settings widget +#. Init function where are added UI hadle functions +#. Expert Settings widget (pure-ftpd) +#. define for tabs_pureftpd necessary later in screens (CWNTree) +#. +#. @return [Hash{String => Object}] map for Expert Settings widget +#: src/include/ftp-server/dialogs.rb:1638 +#: src/include/ftp-server/dialogs.rb:1712 msgid "Passive Mode" msgstr "수동 모드" -#. end of `CheckBoxFrame(`id("SSLEnable"), "Sec&urity Settings", true -#. end of `Frame ( _("Additional Settings") -#: src/include/ftp-server/dialogs.rb:1671 -#: src/include/ftp-server/dialogs.rb:1726 +#. end of `CheckBoxFrame(`id("SSLEnable"), "Sec&urity Settings", true +#. end of `Frame ( _("Additional Settings") +#: src/include/ftp-server/dialogs.rb:1671 +#: src/include/ftp-server/dialogs.rb:1726 msgid "SUSEfirewall Settings" msgstr "SUSEfirewall 설정" -#. TRANSLATORS: part of dialog caption -#. TRANSLATORS: part of dialog caption -#: src/include/ftp-server/dialogs.rb:1676 -#: src/include/ftp-server/dialogs.rb:1731 +#. TRANSLATORS: part of dialog caption +#. TRANSLATORS: part of dialog caption +#: src/include/ftp-server/dialogs.rb:1676 +#: src/include/ftp-server/dialogs.rb:1731 msgid "FTP Expert Settings" msgstr "FTP 고급 설정" -#. TRANSLATORS: tree menu item -#. TRANSLATORS: tree menu item -#: src/include/ftp-server/dialogs.rb:1678 -#: src/include/ftp-server/dialogs.rb:1733 +#. TRANSLATORS: tree menu item +#. TRANSLATORS: tree menu item +#: src/include/ftp-server/dialogs.rb:1678 +#: src/include/ftp-server/dialogs.rb:1733 msgid "Expert Settings" msgstr "고급 설정" -#: src/include/ftp-server/dialogs.rb:1720 +#: src/include/ftp-server/dialogs.rb:1720 msgid "Additional Settings" msgstr "추가 설정" -#. Read dialog help 1/2 -#: src/include/ftp-server/helps.rb:17 +#. Read dialog help 1/2 +#: src/include/ftp-server/helps.rb:17 msgid "" "<p><b><big>Initializing FTP Server Configuration</big></b><br>\n" "</p>\n" @@ -1295,8 +1271,8 @@ "<p><b><big>FTP 서버 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/ftp-server/helps.rb:21 +#. Read dialog help 2/2 +#: src/include/ftp-server/helps.rb:21 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -1304,8 +1280,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/ftp-server/helps.rb:25 +#. Write dialog help 1/2 +#: src/include/ftp-server/helps.rb:25 msgid "" "<p><b><big>Saving FTP Server Configuration</big></b><br>\n" "</p>\n" @@ -1313,8 +1289,8 @@ "<p><b><big>FTP 서버 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/ftp-server/helps.rb:29 +#. Write dialog help 2/2 +#: src/include/ftp-server/helps.rb:29 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -1326,27 +1302,25 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. -----------================= START_UP SCREEN =============---------- -#. -#. Start widget switching daemons help 1/1 -#: src/include/ftp-server/helps.rb:40 +#. -----------================= START_UP SCREEN =============---------- +#. +#. Start widget switching daemons help 1/1 +#: src/include/ftp-server/helps.rb:40 msgid "" "<p><b>Selected Service</b><br>\n" -" The frame shows which daemon is currently configured: <b>vsftpd, pure-" -"ftpd, \n" +" The frame shows which daemon is currently configured: <b>vsftpd, pure-ftpd, \n" " </b>. If you have installed both daemons you can switch between them.\n" "</p>\n" msgstr "" "<p><b>선택한 서비스</b><br>\n" -" 프레임에는 현재 구성된 데몬이 표시됩니다(예: <b>vsftpd, pure-ftpd). \n" +" 프레임에는 현재 구성된 데몬이 표시됩니다(예: <b>vsftpd, pure-ftpd</b>). \n" " 두 데몬을 모두 설치한 경우 데몬 간에 전환할 수 있습니다.\n" "</p>\n" -#. -----------================= GENERAL SCREEN =============---------- -#. -#. general welcome message help 1/1 -#: src/include/ftp-server/helps.rb:50 +#. -----------================= GENERAL SCREEN =============---------- +#. +#. general welcome message help 1/1 +#: src/include/ftp-server/helps.rb:50 msgid "" "<p><b>Welcome Message</b><br>\n" "Specify the name of a file containing the\n" @@ -1358,8 +1332,8 @@ "포함된 파일의 이름을 지정합니다.\n" "</p>\n" -#. general chroot help 1/1 -#: src/include/ftp-server/helps.rb:57 +#. general chroot help 1/1 +#: src/include/ftp-server/helps.rb:57 msgid "" "<p><b>Chroot</b><br>\n" "When enabled, local users will be (by default) placed in a \n" @@ -1377,8 +1351,8 @@ "있습니다. 수행 중인 작업을 알고 있는 경우에만 Chroot를 활성화하십시오.\n" "</p>\n" -#. general logging help 1/1 -#: src/include/ftp-server/helps.rb:67 +#. general logging help 1/1 +#: src/include/ftp-server/helps.rb:67 msgid "" "<p><b>Verbose Logging</b><br>\n" "When enabled, all FTP requests and responses are logged.\n" @@ -1388,8 +1362,8 @@ "활성화된 경우 모든 FTP 요청 및 응답이 로깅됩니다.\n" "</p>\n" -#. general umask help - only pure-ftpd 1/1 -#: src/include/ftp-server/helps.rb:73 +#. general umask help - only pure-ftpd 1/1 +#: src/include/ftp-server/helps.rb:73 msgid "" "<p><b>Umask</b><br>\n" "File creation mask. (umask for files):(umask for dirs). \n" @@ -1401,8 +1375,8 @@ "잘 모를 경우 177:077을 지정하십시오.\n" "</p>\n" -#. general umask for anonymous help - only vsftpd 1/1 -#: src/include/ftp-server/helps.rb:80 +#. general umask for anonymous help - only vsftpd 1/1 +#: src/include/ftp-server/helps.rb:80 msgid "" "<p><b>Umask for Anonymous:</b><br>\n" "The value to which the umask for file creation is set for anonymous users. \n" @@ -1416,12 +1390,11 @@ "값이 10진수 정수로 처리됩니다.\n" "</p>\n" -#. general umask for authenticated users help - only vsftpd 1/1 -#: src/include/ftp-server/helps.rb:88 +#. general umask for authenticated users help - only vsftpd 1/1 +#: src/include/ftp-server/helps.rb:88 msgid "" "<p><b>Umask for Authenticated Users:</b><br>\n" -"The value to which the umask for file creation is set for authenticated " -"users. \n" +"The value to which the umask for file creation is set for authenticated users. \n" "If you want to specify octal values, remember the \"0\" prefix, otherwise \n" "the value will be treated as a base 10 integer.\n" "</p>\n" @@ -1432,8 +1405,8 @@ "값이 10진수 정수로 처리됩니다.\n" "</p>\n" -#. general FTP dir for anonymous help 1/1 -#: src/include/ftp-server/helps.rb:96 +#. general FTP dir for anonymous help 1/1 +#: src/include/ftp-server/helps.rb:96 msgid "" "<p><b>FTP Directory for Anonymous Users:</b><br>\n" "Specify a directory which is used for FTP anonymous users. \n" @@ -1445,8 +1418,8 @@ "<b>찾아보기</b>를 눌러 로컬 파일 시스템에서 디렉토리를 선택하십시오.\n" "</p>\n" -#. general FTP dir for authenticated help 1/1 -#: src/include/ftp-server/helps.rb:103 +#. general FTP dir for authenticated help 1/1 +#: src/include/ftp-server/helps.rb:103 msgid "" "<p><b>FTP Directory for Authenticated Users:</b><br>\n" "Specify a directory which is used for FTP authenticated users. \n" @@ -1458,10 +1431,10 @@ "<b>찾아보기</b>를 눌러 로컬 파일 시스템에서 디렉토리를 선택하십시오.\n" "</p>\n" -#. -----------================= PERFORMANCE SCREEN =============---------- -#. -#. performance Max Idle Time help 1/1 -#: src/include/ftp-server/helps.rb:113 +#. -----------================= PERFORMANCE SCREEN =============---------- +#. +#. performance Max Idle Time help 1/1 +#: src/include/ftp-server/helps.rb:113 msgid "" "<p><b>Max Idle Time:</b><br>\n" "The maximum time (timeout) a remote client \n" @@ -1473,8 +1446,8 @@ "최대 시간(제한 시간)입니다.\n" "</p>\n" -#. performance max clients per IP help 1/1 -#: src/include/ftp-server/helps.rb:120 +#. performance max clients per IP help 1/1 +#: src/include/ftp-server/helps.rb:120 msgid "" "<p><b>Max Clients for One IP:</b><br>\n" "The maximum number of clients allowed to connect\n" @@ -1486,8 +1459,8 @@ "최대 클라이언트 수입니다. \n" "</p>\n" -#. performance max clients help 1/1 -#: src/include/ftp-server/helps.rb:127 +#. performance max clients help 1/1 +#: src/include/ftp-server/helps.rb:127 msgid "" "<p><b>Max Clients:</b><br>\n" "The maximum number of clients allowed to connect. \n" @@ -1501,8 +1474,8 @@ "</p>\n" "\n" -#. performance local max rate help 1/1 -#: src/include/ftp-server/helps.rb:134 +#. performance local max rate help 1/1 +#: src/include/ftp-server/helps.rb:134 msgid "" "<p><b>Local Max Rate:</b><br>\n" "The maximum data transfer rate permitted for local authenticated users.\n" @@ -1512,8 +1485,8 @@ "로컬 인증 사용자에게 허용되는 최대 데이터 전송 속도입니다.\n" "</p>" -#. performance anonymous max rate help 1/1 -#: src/include/ftp-server/helps.rb:140 +#. performance anonymous max rate help 1/1 +#: src/include/ftp-server/helps.rb:140 msgid "" "<p><b>Anonymous Max Rate:</b><br>\n" "The maximum data transfer rate permitted for anonymous clients.</p>\n" @@ -1521,17 +1494,15 @@ "<p><b>익명 사용자 최대 전송 속도:</b><br>\n" "익명 클라이언트에게 허용되는 최대 데이터 전송 속도입니다.</p>\n" -#. -----------================= Authentication SCREEN =============---------- -#. -#. authentication Enable/Disable Anonymous and Local help 1/1 -#: src/include/ftp-server/helps.rb:147 +#. -----------================= Authentication SCREEN =============---------- +#. +#. authentication Enable/Disable Anonymous and Local help 1/1 +#: src/include/ftp-server/helps.rb:147 msgid "" "<p><b>Enable/Disable Anonymous and Local Users</b><br>\n" "<b>Anonymous Only</b>: If enabled, only anonymous logins are permitted.\n" -"<b>Authenticated Users Only</b>: If enabled, only authenticated users are " -"permitted.\n" -"<b>Both</b> If enabled, authenticated users and anonymous users are " -"permitted.\n" +"<b>Authenticated Users Only</b>: If enabled, only authenticated users are permitted.\n" +"<b>Both</b> If enabled, authenticated users and anonymous users are permitted.\n" "</p>\n" msgstr "" "<p><b>익명 및 로컬 사용자 활성화/비활성화</b><br>\n" @@ -1540,8 +1511,8 @@ "<b>둘 다</b> 활성화된 경우 인증 사용자와 익명 사용자가 허용됩니다.\n" "</p>\n" -#. authentication Enable Upload help 1/1 -#: src/include/ftp-server/helps.rb:155 +#. authentication Enable Upload help 1/1 +#: src/include/ftp-server/helps.rb:155 msgid "" "<p><b>Enable Upload</b><br>\n" "If enabled, FTP users can upload. To allow anonymous users \n" @@ -1550,18 +1521,16 @@ msgstr "" "<p><b>업로드 활성화</b><br>\n" "활성화된 경우 FTP 사용자가 업로드할 수 있습니다. 익명 사용자가 \n" -"업로드할 수 있게 허용하려면 <b>익명 사용자가 업로드할 수 있음</b>을 활성화하" -"십시오.\n" +"업로드할 수 있게 허용하려면 <b>익명 사용자가 업로드할 수 있음</b>을 활성화하십시오.\n" "</p>\n" -#. authentication Anonymous Can Upload help 1/1 -#: src/include/ftp-server/helps.rb:162 +#. authentication Anonymous Can Upload help 1/1 +#: src/include/ftp-server/helps.rb:162 msgid "" "<p><b>Anonymous Can Upload</b><br>\n" "If enabled anonymous users will be permitted to upload.\n" "<i>vsftpd only: </i>If you want to allow anonymous users to upload, you \n" -"need an existing directory with write permission in the home directory after " -"login.\n" +"need an existing directory with write permission in the home directory after login.\n" "</p>\n" msgstr "" "<p><b>익명 사용자가 업로드할 수 있음</b><br>\n" @@ -1570,15 +1539,13 @@ "로그인 후 홈 디렉토리에 쓰기 권한이 있는 기존 디렉토리가 필요합니다.\n" "</p>\n" -#. authentication Anonymous Can Create Dirs help 1/1 -#: src/include/ftp-server/helps.rb:170 +#. authentication Anonymous Can Create Dirs help 1/1 +#: src/include/ftp-server/helps.rb:170 msgid "" "<p><b>Anonymous Can Create Dirs</b><br>\n" "If enabled, anonymous users can create directories.\n" -"<i>vsftpd only:</i> If you want to allow anonymous users to create " -"directories,\n" -"you need an existing directory with write permission in the home directory " -"after login.</p>\n" +"<i>vsftpd only:</i> If you want to allow anonymous users to create directories,\n" +"you need an existing directory with write permission in the home directory after login.</p>\n" msgstr "" "<p><b>익명 사용자가 디렉토리를 생성할 수 있음</b><br>\n" "활성화된 경우 익명 사용자가 디렉토리를 생성할 수 있습니다.\n" @@ -1586,10 +1553,10 @@ "로그인 후 홈 디렉토리에 쓰기 권한이 있는 기존 디렉토리가 필요합니다.\n" "</p>\n" -#. -----------================= EXPERT SETTINGS SCREEN =============---------- -#. -#. expert settings Enable Passive Mode help 1/1 -#: src/include/ftp-server/helps.rb:181 +#. -----------================= EXPERT SETTINGS SCREEN =============---------- +#. +#. expert settings Enable Passive Mode help 1/1 +#: src/include/ftp-server/helps.rb:181 msgid "" "<p><b>Enable Passive Mode</b><br>\n" "If enabled, the FTP server will allow passive mode for connections. \n" @@ -1599,8 +1566,8 @@ "활성화된 경우 FTP 서버에서 연결에 대해 수동 모드를 허용합니다. \n" "</p>\n" -#. expert settings Min Port for Pas. Mode help 1/1 -#: src/include/ftp-server/helps.rb:187 +#. expert settings Min Port for Pas. Mode help 1/1 +#: src/include/ftp-server/helps.rb:187 msgid "" "<p><b>Min Port for Passive Mode</b><br>\n" "Minimum value for a port range for passive connection replies.\n" @@ -1612,8 +1579,8 @@ "이 값은 방화벽을 통해 보호하는 데 사용됩니다. \n" "</p>\n" -#. expert settings Max Port for Pas. Mode help 1/1 -#: src/include/ftp-server/helps.rb:194 +#. expert settings Max Port for Pas. Mode help 1/1 +#: src/include/ftp-server/helps.rb:194 msgid "" "<p><b>Max Port for Pas. Mode</b><br>\n" "Maximum value for a port range for passive connection replies.\n" @@ -1625,8 +1592,8 @@ "이 값은 방화벽을 통해 보호하는 데 사용됩니다. \n" "</p>\n" -#. expert settings Enable SSL help 1/1 -#: src/include/ftp-server/helps.rb:201 +#. expert settings Enable SSL help 1/1 +#: src/include/ftp-server/helps.rb:201 msgid "" "<p><b>Enable SSL</b><br>\n" "If enabled, SSL connections are allowed.\n" @@ -1636,8 +1603,8 @@ "활성화된 경우 SSL 연결이 허용됩니다.\n" "</p>\n" -#. expert settings Enable SSL v2 help 1/1 -#: src/include/ftp-server/helps.rb:207 +#. expert settings Enable SSL v2 help 1/1 +#: src/include/ftp-server/helps.rb:207 msgid "" "<p><b>Enable SSL v2</b><br>\n" "If enabled, SSL version 2 connections are allowed.\n" @@ -1647,8 +1614,8 @@ "활성화된 경우 SSL 버전 2 연결이 허용됩니다.\n" "</p>\n" -#. expert settings Enable SSL v3 help 1/1 -#: src/include/ftp-server/helps.rb:213 +#. expert settings Enable SSL v3 help 1/1 +#: src/include/ftp-server/helps.rb:213 msgid "" "<p><b>Enable SSL v3</b><br>\n" "If enabled, SSL version 3 connections are allowed.\n" @@ -1658,8 +1625,8 @@ "활성화된 경우 SSL 버전 3 연결이 허용됩니다.\n" "</p>\n" -#. expert settings Enable TLS help 1/1 -#: src/include/ftp-server/helps.rb:219 +#. expert settings Enable TLS help 1/1 +#: src/include/ftp-server/helps.rb:219 msgid "" "<p><b>Enable TLS</b><br>\n" "If enabled, TLS connections are allowed.\n" @@ -1669,8 +1636,8 @@ "활성화된 경우 TLS 연결이 허용됩니다.\n" "</p>\n" -#. expert settings RSA Certificate to Use for SSL Encrypted Connections help 1/1 -#: src/include/ftp-server/helps.rb:225 +#. expert settings RSA Certificate to Use for SSL Encrypted Connections help 1/1 +#: src/include/ftp-server/helps.rb:225 msgid "" "<p><b>RSA Certificate to Use for SSL-encrypted Connections</b><br>\n" "This option specifies the location of the RSA certificate to \n" @@ -1682,8 +1649,8 @@ "RSA 인증서의 위치를 지정합니다. <b>찾아보기</b>를 눌러 파일을 선택하십시오.\n" "</p>\n" -#. expert settings Disable Downloading Unvalidated Data help 1/1 -#: src/include/ftp-server/helps.rb:232 +#. expert settings Disable Downloading Unvalidated Data help 1/1 +#: src/include/ftp-server/helps.rb:232 msgid "" "<p><b>Disable Downloading Unvalidated Data</b><br>\n" "Disallow downloading of files that were uploaded \n" @@ -1695,27 +1662,25 @@ "파일 다운로드를 허용하지 않습니다.\n" "</p>\n" -#. expert settings Security Settings help 1/1 -#: src/include/ftp-server/helps.rb:239 +#. expert settings Security Settings help 1/1 +#: src/include/ftp-server/helps.rb:239 msgid "" "<p><b>Security Settings</b><br>\n" "<i>Disable SSL/TLS</i> Disable SSL/TLS encryption layer.\n" "<i>Accept SSL and TLS</i> Accept both, traditional and encrypted sessions.\n" -"<i>Refuse Connections Without SSL/TLS</i> Refuse connections that do not use " -"SSL/TLS security mechanisms, including anonymous sessions.\n" +"<i>Refuse Connections Without SSL/TLS</i> Refuse connections that do not use SSL/TLS security mechanisms, including anonymous sessions.\n" "</p>" msgstr "" "<p><b>보안 설정</b><br>\n" "<i>SSL/TLS 비활성화</i> SSL/TLS 암호화 계층을 비활성화합니다.\n" "<i>SSL 및 TLS 허용</i> 기존 및 암호화된 세션을 둘 다 허용합니다.\n" -"<i>SSL/TLS가 없는 연결 거부</i> 익명 세션을 포함하여 SSL/TLS 보안 메커니즘을 " -"사용하지 않는 연결을 거부합니다.\n" +"<i>SSL/TLS가 없는 연결 거부</i> 익명 세션을 포함하여 SSL/TLS 보안 메커니즘을 사용하지 않는 연결을 거부합니다.\n" "</p>" -#. -----------================= SUMMARY =============---------- -#. -#. Summary dialog help 1/3 -#: src/include/ftp-server/helps.rb:251 +#. -----------================= SUMMARY =============---------- +#. +#. Summary dialog help 1/3 +#: src/include/ftp-server/helps.rb:251 msgid "" "<p><b><big>FTP Server Configuration</big></b><br>\n" "Configure the FTP server.<br></p>\n" @@ -1723,8 +1688,8 @@ "<p><b><big>FTP 서버 구성</big></b><br>\n" "FTP 서버를 구성합니다.<br></p>\n" -#. Summary dialog help 2/3 -#: src/include/ftp-server/helps.rb:255 +#. Summary dialog help 2/3 +#: src/include/ftp-server/helps.rb:255 msgid "" "<p><b><big>Adding an FTP Server:</big></b><br>\n" "Choose an FTP server from the list of detected FTP servers.\n" @@ -1736,8 +1701,8 @@ "FTP 서버가 검색되지 않은 경우 <b>기타(검색되지 않음)</b>를 사용하십시오.\n" "그런 다음 <b>구성</b>을 누르십시오.</p>\n" -#. Summary dialog help 3/3 -#: src/include/ftp-server/helps.rb:262 +#. Summary dialog help 3/3 +#: src/include/ftp-server/helps.rb:262 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -1747,8 +1712,8 @@ "<b>편집</b>을 누르면 구성을 변경할 수 있는\n" "대화 상자가 추가로 열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/ftp-server/helps.rb:268 +#. Ovreview dialog help 1/3 +#: src/include/ftp-server/helps.rb:268 msgid "" "<p><b><big>FTP Server Configuration Overview</big></b><br>\n" "Obtain an overview of the installed FTP servers. Additionally,\n" @@ -1758,8 +1723,8 @@ "설치된 FTP 서버의 개요를 가져옵니다. 또한\n" "해당 구성을 편집하십시오.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/ftp-server/helps.rb:274 +#. Ovreview dialog help 2/3 +#: src/include/ftp-server/helps.rb:274 msgid "" "<p><b><big>Adding a FTP Server</big></b><br>\n" "Press <b>Add</b> to configure a FTP server.</p>\n" @@ -1767,8 +1732,8 @@ "<p><b><big>FTP 서버 추가</big></b><br>\n" "<b>추가</b>를 눌러 FTP 서버를 구성합니다.</p>\n" -#. Ovreview dialog help 3/3 -#: src/include/ftp-server/helps.rb:278 +#. Ovreview dialog help 3/3 +#: src/include/ftp-server/helps.rb:278 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "Choose a FTP server to change or remove.\n" @@ -1778,42 +1743,42 @@ "변경하거나 제거할 FTP 서버를 선택합니다.\n" "그런 다음 각각 <b>편집</b> 또는 <b>삭제</b>를 누르십시오.</p>\n" -#. CWMServiceStart function with no parameter returning boolean value -#. that says if the service is started. -#: src/include/ftp-server/wid_functions.rb:84 +#. CWMServiceStart function with no parameter returning boolean value +#. that says if the service is started. +#: src/include/ftp-server/wid_functions.rb:84 msgid "Xinetd is not running." msgstr "Xinetd가 실행 중이 아닙니다." -#: src/include/ftp-server/wid_functions.rb:85 +#: src/include/ftp-server/wid_functions.rb:85 msgid "Start it now?" msgstr "지금 시작하시겠습니까?" -#. Valid function of "Umask (umask files:umask dirs)" -#. check value of textentry -#. only pure-ftpd -#: src/include/ftp-server/wid_functions.rb:623 +#. Valid function of "Umask (umask files:umask dirs)" +#. check value of textentry +#. only pure-ftpd +#: src/include/ftp-server/wid_functions.rb:623 msgid "Not a valid umask." msgstr "올바른 umask가 아닙니다." -#. Handle function of "Browse" -#. handling value in textentry of "Umask for Anonynmous Users" -#. Handle function of "Browse" -#. handling value in textentry of "Umask for Authenticated Users" -#: src/include/ftp-server/wid_functions.rb:785 -#: src/include/ftp-server/wid_functions.rb:823 +#. Handle function of "Browse" +#. handling value in textentry of "Umask for Anonynmous Users" +#. Handle function of "Browse" +#. handling value in textentry of "Umask for Authenticated Users" +#: src/include/ftp-server/wid_functions.rb:785 +#: src/include/ftp-server/wid_functions.rb:823 msgid "Select directory" msgstr "디렉토리 선택" -#. end of if (button == "EnableUpload") { -#: src/include/ftp-server/wid_functions.rb:1059 +#. end of if (button == "EnableUpload") { +#: src/include/ftp-server/wid_functions.rb:1059 msgid "Create the \"upload\" directory in %1\n" msgstr "%1에서 \"upload\" 디렉토리를 생성하고\n" -#: src/include/ftp-server/wid_functions.rb:1064 +#: src/include/ftp-server/wid_functions.rb:1064 msgid "and enable write access?\n" msgstr "쓰기 권한을 사용하시겠습니까?\n" -#: src/include/ftp-server/wid_functions.rb:1066 +#: src/include/ftp-server/wid_functions.rb:1066 msgid "" "If you want anonymous users to be able to upload,\n" " you need to create a directory with write access.\n" @@ -1823,15 +1788,15 @@ "쓰기 액세스가 있는 디렉토리를 만들어야 합니다.\n" "\n" -#: src/include/ftp-server/wid_functions.rb:1073 -#: src/include/ftp-server/wid_functions.rb:1094 -#: src/include/ftp-server/wid_functions.rb:1120 -#: src/include/ftp-server/wid_functions.rb:1143 +#: src/include/ftp-server/wid_functions.rb:1073 +#: src/include/ftp-server/wid_functions.rb:1094 +#: src/include/ftp-server/wid_functions.rb:1120 +#: src/include/ftp-server/wid_functions.rb:1143 msgid " is a home directory after the login of anonymous users." msgstr " 은(는) 익명 사용자가 로그인 후 사용하는 홈 디렉토리입니다." -#: src/include/ftp-server/wid_functions.rb:1084 -#: src/include/ftp-server/wid_functions.rb:1131 +#: src/include/ftp-server/wid_functions.rb:1084 +#: src/include/ftp-server/wid_functions.rb:1131 msgid "" "Do you want to change permissions\n" "for\n" @@ -1839,29 +1804,28 @@ "다음 권한을 \n" "변경하시겠습니까?\n" -#: src/include/ftp-server/wid_functions.rb:1087 -#: src/include/ftp-server/wid_functions.rb:1134 +#: src/include/ftp-server/wid_functions.rb:1087 +#: src/include/ftp-server/wid_functions.rb:1134 msgid "Upload (allow writing)?" msgstr "업로드하시겠습니까(쓰기 허용)?" -#: src/include/ftp-server/wid_functions.rb:1089 +#: src/include/ftp-server/wid_functions.rb:1089 msgid "" "To allow anonymous users to upload, you need a directory with write access.\n" "\n" msgstr "" -"익명 사용자가 업로드할 수 있게 허용하려면 쓰기 권한이 있는 디렉토리가 필요합" -"니다.\n" +"익명 사용자가 업로드할 수 있게 허용하려면 쓰기 권한이 있는 디렉토리가 필요합니다.\n" "\n" -#: src/include/ftp-server/wid_functions.rb:1108 +#: src/include/ftp-server/wid_functions.rb:1108 msgid "Do you want to create a directory?\n" msgstr "디렉토리를 생성하시겠습니까?\n" -#: src/include/ftp-server/wid_functions.rb:1111 +#: src/include/ftp-server/wid_functions.rb:1111 msgid "Upload with write access?" msgstr "쓰기 허용 업로드를 수행하시겠습니까?" -#: src/include/ftp-server/wid_functions.rb:1113 +#: src/include/ftp-server/wid_functions.rb:1113 msgid "" "If you want to allow anonymous users to create directories,\n" " you have to create a directory with write access.\n" @@ -1871,7 +1835,7 @@ " 쓰기 권한이 있는 디렉토리를 생성해야 합니다.\n" "\n" -#: src/include/ftp-server/wid_functions.rb:1136 +#: src/include/ftp-server/wid_functions.rb:1136 msgid "" "If you want anonymous users to be able to create directories,\n" " you need a directory with write access.\n" @@ -1881,23 +1845,23 @@ " 쓰기 권한이 있는 디렉토리가 필요합니다.\n" "\n" -#. Handle function of "Anonymous Can Upload" -#. check permissions for upload dir -#. -#. end of if (FtpServer::pure_ftp_allowed_permissios_upload == 0) -#. Handle function of "Anonymous Can Create Directories" -#. check permissions for upload dir -#. -#. end of if (FtpServer::pure_ftp_allowed_permissios_upload == 0) -#: src/include/ftp-server/wid_functions.rb:1203 -#: src/include/ftp-server/wid_functions.rb:1223 -#: src/include/ftp-server/wid_functions.rb:1290 -#: src/include/ftp-server/wid_functions.rb:1310 +#. Handle function of "Anonymous Can Upload" +#. check permissions for upload dir +#. +#. end of if (FtpServer::pure_ftp_allowed_permissios_upload == 0) +#. Handle function of "Anonymous Can Create Directories" +#. check permissions for upload dir +#. +#. end of if (FtpServer::pure_ftp_allowed_permissios_upload == 0) +#: src/include/ftp-server/wid_functions.rb:1203 +#: src/include/ftp-server/wid_functions.rb:1223 +#: src/include/ftp-server/wid_functions.rb:1290 +#: src/include/ftp-server/wid_functions.rb:1310 msgid "Change permissions of %1 ?\n" msgstr "%1의 권한을 변경하시겠습니까?\n" -#: src/include/ftp-server/wid_functions.rb:1207 -#: src/include/ftp-server/wid_functions.rb:1294 +#: src/include/ftp-server/wid_functions.rb:1207 +#: src/include/ftp-server/wid_functions.rb:1294 msgid "" "If you want to allow uploads for \"anonymous\" users, \n" "you need a directory with write access for them." @@ -1905,146 +1869,135 @@ "\"익명\" 사용자가 업로드할 수 있도록 하려면 쓰기 권한이\n" "있는 디렉토리가 필요합니다." -#: src/include/ftp-server/wid_functions.rb:1227 -msgid "" -"For anonymous connections the home directory of an anonymous user should " -"have no write access.\n" +#: src/include/ftp-server/wid_functions.rb:1227 +msgid "For anonymous connections the home directory of an anonymous user should have no write access.\n" msgstr "익명 연결의 경우 익명 사용자용 홈 디렉토리에는 쓰기 권한이 없습니다.\n" -#: src/include/ftp-server/wid_functions.rb:1314 -msgid "" -"For anonymous connections the home directory of an anonymous user should " -"have no write access." -msgstr "" -"익명 연결의 경우 익명 사용자의 홈 디렉토리에는 쓰기 권한이 없어야 합니다." +#: src/include/ftp-server/wid_functions.rb:1314 +msgid "For anonymous connections the home directory of an anonymous user should have no write access." +msgstr "익명 연결의 경우 익명 사용자의 홈 디렉토리에는 쓰기 권한이 없어야 합니다." -#. Valid function of "Max Port for Pas. Mode" -#. check values Max Port >= Min Port -#: src/include/ftp-server/wid_functions.rb:1457 +#. Valid function of "Max Port for Pas. Mode" +#. check values Max Port >= Min Port +#: src/include/ftp-server/wid_functions.rb:1457 msgid "Condition for ports is max port > min port." msgstr "최대 포트 번호가 최소 포트 번호보다 커야 합니다." -#. Valid function of "RSA Certificate to Use for SSL Encrypted Connections" -#. check value if user enable SSL Certificate (textentry) doesn't be empty -#: src/include/ftp-server/wid_functions.rb:1637 +#. Valid function of "RSA Certificate to Use for SSL Encrypted Connections" +#. check value if user enable SSL Certificate (textentry) doesn't be empty +#: src/include/ftp-server/wid_functions.rb:1637 msgid "RSA certificate is missing." msgstr "RSA 인증서가 없습니다." -#. Handle function of "Browse" -#. handling value in textentry of "RSA Certificate to Use for SSL Encrypted Connections" -#: src/include/ftp-server/wid_functions.rb:1664 +#. Handle function of "Browse" +#. handling value in textentry of "RSA Certificate to Use for SSL Encrypted Connections" +#: src/include/ftp-server/wid_functions.rb:1664 msgid "Select File" msgstr "파일 선택" -#. Valid function of "Security Settings" -#. check of existing certificate -#: src/include/ftp-server/wid_functions.rb:1722 -msgid "" -"The <tt>/etc/ssl/private/pure-ftpd.pem</tt> certificate for the SSL " -"connection is missing." -msgstr "" -"SSL 연결에 사용할 <tt>/etc/ssl/private/pure-ftpd.pem</tt> 인증서가 없습니다." +#. Valid function of "Security Settings" +#. check of existing certificate +#: src/include/ftp-server/wid_functions.rb:1722 +msgid "The <tt>/etc/ssl/private/pure-ftpd.pem</tt> certificate for the SSL connection is missing." +msgstr "SSL 연결에 사용할 <tt>/etc/ssl/private/pure-ftpd.pem</tt> 인증서가 없습니다." -#. 0 => anonymous only, 1 => authenticated only, 2=> both -#: src/modules/FtpServer.rb:214 +#. 0 => anonymous only, 1 => authenticated only, 2=> both +#: src/modules/FtpServer.rb:214 msgid "Welcome message" msgstr "시작 메시지" -#. FtpServer read dialog caption -#: src/modules/FtpServer.rb:816 +#. FtpServer read dialog caption +#: src/modules/FtpServer.rb:816 msgid "Initializing FTP Configuration" msgstr "FTP 구성 초기화 중" -#. Part for commandline - it is necessary choose daemon if both are installed -#: src/modules/FtpServer.rb:827 +#. Part for commandline - it is necessary choose daemon if both are installed +#: src/modules/FtpServer.rb:827 msgid "You have installed both daemons:" msgstr "두 개의 데몬이 모두 설치되어 있습니다." -#: src/modules/FtpServer.rb:829 +#: src/modules/FtpServer.rb:829 msgid "Choose one of them for configuration." msgstr "이 중에서 구성에 사용할 항목을 선택하십시오." -#: src/modules/FtpServer.rb:831 +#: src/modules/FtpServer.rb:831 msgid "Do you want to configure vsftpd? Alternatively choose pure-ftpd." msgstr "vsftpd를 구성하시겠습니까? 또는 pure-ftpd를 선택하십시오." -#: src/modules/FtpServer.rb:839 -msgid "" -"You have installed both daemons. Therefore you have to run the configuration " -"in interactive mode." -msgstr "" -"데몬을 둘 다 설치했습니다. 따라서 대화형 모드에서 구성을 실행해야 합니다." +#: src/modules/FtpServer.rb:839 +msgid "You have installed both daemons. Therefore you have to run the configuration in interactive mode." +msgstr "데몬을 둘 다 설치했습니다. 따라서 대화형 모드에서 구성을 실행해야 합니다." -#. Progress stage 1/2 -#: src/modules/FtpServer.rb:858 +#. Progress stage 1/2 +#: src/modules/FtpServer.rb:858 msgid "Read settings from the config file" msgstr "구성 파일에서 설정 읽기" -#. Progress stage 2/2 -#: src/modules/FtpServer.rb:860 +#. Progress stage 2/2 +#: src/modules/FtpServer.rb:860 msgid "Read the previous settings" msgstr "이전 설정 읽기" -#. Progress stage 1/2 -#: src/modules/FtpServer.rb:864 +#. Progress stage 1/2 +#: src/modules/FtpServer.rb:864 msgid "Reading the settings..." msgstr "설정을 읽는 중..." -#. calling read function for reading settings form config file -#: src/modules/FtpServer.rb:874 +#. calling read function for reading settings form config file +#: src/modules/FtpServer.rb:874 msgid "Cannot Read Current Settings." msgstr "현재 설정을 읽을 수 없습니다." -#. FtpServer read dialog caption -#: src/modules/FtpServer.rb:891 +#. FtpServer read dialog caption +#: src/modules/FtpServer.rb:891 msgid "Saving FTP Configuration" msgstr "FTP 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/FtpServer.rb:901 +#. Progress stage 1/2 +#: src/modules/FtpServer.rb:901 msgid "Write the settings to the config file" msgstr "설정을 구성 파일에 쓰기" -#. Progress stage 2/2 -#: src/modules/FtpServer.rb:903 +#. Progress stage 2/2 +#: src/modules/FtpServer.rb:903 msgid "Write the settings for starting daemon" msgstr "데몬 시작 설정 쓰기" -#. Progress step 1/1 -#: src/modules/FtpServer.rb:907 +#. Progress step 1/1 +#: src/modules/FtpServer.rb:907 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. write options to the config file -#: src/modules/FtpServer.rb:917 +#. write options to the config file +#: src/modules/FtpServer.rb:917 msgid "Cannot write settings!" msgstr "설정을 쓸 수 없습니다." -#. write settings for starting daemon -#: src/modules/FtpServer.rb:923 +#. write settings for starting daemon +#: src/modules/FtpServer.rb:923 msgid "Cannot write settings for xinetd!" msgstr "xinetd 설정을 쓸 수 없습니다." -#. write settings for starting daemon -#: src/modules/FtpServer.rb:931 +#. write settings for starting daemon +#: src/modules/FtpServer.rb:931 msgid "Cannot create upload directory for anonymous connections." msgstr "익명 연결에 대한 업로드 디렉토리를 생성할 수 없습니다." -#. anonymous dir -#: src/modules/FtpServer.rb:1079 +#. anonymous dir +#: src/modules/FtpServer.rb:1079 msgid "<p><ul><i>FTP daemon is not configured.</i></ul></p>" msgstr "<p><ul><i>FTP 데몬이 구성되어 있지 않습니다.</i></ul></p>" -#. Translators: Summary head, if nothing configured -#: src/modules/FtpServer.rb:1089 +#. Translators: Summary head, if nothing configured +#: src/modules/FtpServer.rb:1089 msgid "FTP daemon" msgstr "FTP 데몬" -#. Translators: Summary head, if something configured -#: src/modules/FtpServer.rb:1094 +#. Translators: Summary head, if something configured +#: src/modules/FtpServer.rb:1094 msgid "FTP daemon %1" msgstr "FTP 데몬 %1" -#: src/modules/FtpServer.rb:1098 +#: src/modules/FtpServer.rb:1098 msgid "These options will be configured" msgstr "이러한 옵션이 구성됩니다." Modified: branches/SLE12-SP3/yast/ko/po/geo-cluster.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/geo-cluster.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/geo-cluster.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,482 +14,471 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xgeo-cluster module -#: src/clients/geo-cluster.rb:54 +#. Command line help text for the Xgeo-cluster module +#: src/clients/geo-cluster.rb:54 msgid "Configuration of geo-cluster" msgstr "geo-cluster 구성" -#. Rich text title for GeoCluster in proposals -#: src/clients/geo-cluster_proposal.rb:83 +#. Rich text title for GeoCluster in proposals +#: src/clients/geo-cluster_proposal.rb:83 msgid "GeoCluster" msgstr "GeoCluster" -#. Menu title for GeoCluster in proposals -#: src/clients/geo-cluster_proposal.rb:87 +#. Menu title for GeoCluster in proposals +#: src/clients/geo-cluster_proposal.rb:87 msgid "&GeoCluster" msgstr "GeoCluster(&G)" -#. GeoCluster summary dialog caption -#. GeoCluster configure2 dialog caption -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/geo-cluster/wizards.ycp -#. Package: Configuration of geo-cluster -#. Summary: Wizards definitions -#. Authors: Dongmao Zhang -#. -#. $Id: wizards.ycp 27914 2006-02-13 14:32:08Z locilka $ -#. Initialization dialog caption +#. GeoCluster summary dialog caption +#. GeoCluster configure2 dialog caption +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/geo-cluster/wizards.ycp +#. Package: Configuration of geo-cluster +#. Summary: Wizards definitions +#. Authors: Dongmao Zhang +#. +#. $Id: wizards.ycp 27914 2006-02-13 14:32:08Z locilka $ +#. Initialization dialog caption #: src/include/geo-cluster/complex.rb:83 -#: src/include/geo-cluster/dialogs.rb:480 +#: src/include/geo-cluster/dialogs.rb:480 #: src/include/geo-cluster/dialogs.rb:829 -#: src/include/geo-cluster/wizards.rb:46 -#: src/include/geo-cluster/wizards.rb:141 +#: src/include/geo-cluster/wizards.rb:46 +#: src/include/geo-cluster/wizards.rb:141 msgid "Geo Cluster Configuration" msgstr "Geo Cluster 구성" -#. GeoCluster overview dialog caption -#: src/include/geo-cluster/complex.rb:143 +#. GeoCluster overview dialog caption +#: src/include/geo-cluster/complex.rb:143 msgid "Geo Cluster Overview" msgstr "Geo Cluster 개요" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/geo-cluster/dialogs.ycp -#. Package: Configuration of geo-cluster -#. Summary: Dialogs definitions -#. Authors: Dongmao Zhang -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/geo-cluster/dialogs.rb:51 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/geo-cluster/dialogs.ycp +#. Package: Configuration of geo-cluster +#. Summary: Dialogs definitions +#. Authors: Dongmao Zhang +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/geo-cluster/dialogs.rb:51 msgid "configuration file" msgstr "구성 파일" -#: src/include/geo-cluster/dialogs.rb:58 +#: src/include/geo-cluster/dialogs.rb:58 msgid "transport" msgstr "전송" -#: src/include/geo-cluster/dialogs.rb:65 +#: src/include/geo-cluster/dialogs.rb:65 msgid "port" msgstr "포트" -#: src/include/geo-cluster/dialogs.rb:71 +#: src/include/geo-cluster/dialogs.rb:71 msgid "arbitrator" msgstr "중재자" -#: src/include/geo-cluster/dialogs.rb:74 -#: src/include/geo-cluster/dialogs.rb:85 -#: src/include/geo-cluster/dialogs.rb:819 +#: src/include/geo-cluster/dialogs.rb:74 src/include/geo-cluster/dialogs.rb:85 +#: src/include/geo-cluster/dialogs.rb:819 msgid "Add" msgstr "추가" -#: src/include/geo-cluster/dialogs.rb:75 -#: src/include/geo-cluster/dialogs.rb:86 -#: src/include/geo-cluster/dialogs.rb:820 +#: src/include/geo-cluster/dialogs.rb:75 src/include/geo-cluster/dialogs.rb:86 +#: src/include/geo-cluster/dialogs.rb:820 msgid "Edit" msgstr "편집" -#: src/include/geo-cluster/dialogs.rb:76 -#: src/include/geo-cluster/dialogs.rb:87 -#: src/include/geo-cluster/dialogs.rb:821 +#: src/include/geo-cluster/dialogs.rb:76 src/include/geo-cluster/dialogs.rb:87 +#: src/include/geo-cluster/dialogs.rb:821 msgid "Delete" msgstr "삭제" -#: src/include/geo-cluster/dialogs.rb:82 +#: src/include/geo-cluster/dialogs.rb:82 msgid "site" msgstr "사이트" #: src/include/geo-cluster/dialogs.rb:93 -#: src/include/geo-cluster/dialogs.rb:240 +#: src/include/geo-cluster/dialogs.rb:240 msgid "ticket" msgstr "티켓" -#: src/include/geo-cluster/dialogs.rb:106 +#: src/include/geo-cluster/dialogs.rb:106 msgid "Authentication" msgstr "인증" -#: src/include/geo-cluster/dialogs.rb:108 -#: src/include/geo-cluster/dialogs.rb:161 +#: src/include/geo-cluster/dialogs.rb:108 +#: src/include/geo-cluster/dialogs.rb:161 msgid "Ca&ncel" msgstr "취소(&N)" -#. return `cancel or a string -#: src/include/geo-cluster/dialogs.rb:109 -#: src/include/geo-cluster/dialogs.rb:162 -#: src/include/geo-cluster/dialogs.rb:182 -#: src/include/geo-cluster/dialogs.rb:259 +#. return `cancel or a string +#: src/include/geo-cluster/dialogs.rb:109 +#: src/include/geo-cluster/dialogs.rb:162 +#: src/include/geo-cluster/dialogs.rb:182 +#: src/include/geo-cluster/dialogs.rb:259 msgid "OK" msgstr "확인" -#: src/include/geo-cluster/dialogs.rb:122 +#: src/include/geo-cluster/dialogs.rb:122 msgid "Enable Security Auth" msgstr "보안 인증 활성화" -#: src/include/geo-cluster/dialogs.rb:128 +#: src/include/geo-cluster/dialogs.rb:128 msgid "Authentication file" msgstr "인증 파일" -#: src/include/geo-cluster/dialogs.rb:132 +#: src/include/geo-cluster/dialogs.rb:132 msgid "The file will be written to /etc/booth." msgstr "파일이 /etc/booth에 기록됩니다." -#: src/include/geo-cluster/dialogs.rb:137 +#: src/include/geo-cluster/dialogs.rb:137 msgid "To write it to a different directory, enter an absolute path." msgstr "파일을 다른 디렉토리에 기록하려면 절대 경로를 입력하십시오." -#: src/include/geo-cluster/dialogs.rb:142 -msgid "" -"For a newly created geo cluster, push the button below to generate /etc/" -"booth/<key>." -msgstr "" -"새로 생성된 Geo Cluster의 경우 아래 버튼을 눌러 /etc/booth/<key>를 생성하십시" -"오." +#: src/include/geo-cluster/dialogs.rb:142 +msgid "For a newly created geo cluster, push the button below to generate /etc/booth/<key>." +msgstr "새로 생성된 Geo Cluster의 경우 아래 버튼을 눌러 /etc/booth/<key>를 생성하십시오." -#: src/include/geo-cluster/dialogs.rb:147 -msgid "" -"To join a existing geo cluster, please copy /etc/booth/<key> from other " -"nodes manually." -msgstr "" -"기존 Geo Cluster에 가입하려면 다른 노드에서 수동으로 /etc/booth/<key>를 복사" -"하십시오." +#: src/include/geo-cluster/dialogs.rb:147 +msgid "To join a existing geo cluster, please copy /etc/booth/<key> from other nodes manually." +msgstr "기존 Geo Cluster에 가입하려면 다른 노드에서 수동으로 /etc/booth/<key>를 복사하십시오." -#: src/include/geo-cluster/dialogs.rb:151 +#: src/include/geo-cluster/dialogs.rb:151 msgid "Generate Authentication Key File" msgstr "인증 키 파일 생성" -#: src/include/geo-cluster/dialogs.rb:159 +#: src/include/geo-cluster/dialogs.rb:159 msgid "Basic" msgstr "기본" -#: src/include/geo-cluster/dialogs.rb:183 -#: src/include/geo-cluster/dialogs.rb:260 +#: src/include/geo-cluster/dialogs.rb:183 +#: src/include/geo-cluster/dialogs.rb:260 msgid "Cancel" msgstr "취소" -#: src/include/geo-cluster/dialogs.rb:197 +#: src/include/geo-cluster/dialogs.rb:197 msgid "Please enter a valid ip address" msgstr "유효한 IP 주소를 입력하십시오." -#: src/include/geo-cluster/dialogs.rb:238 +#: src/include/geo-cluster/dialogs.rb:238 msgid "Enter ticket and timeout" msgstr "티켓 및 제한 시간 입력" -#: src/include/geo-cluster/dialogs.rb:244 +#: src/include/geo-cluster/dialogs.rb:244 msgid "timeout" msgstr "제한 시간" -#: src/include/geo-cluster/dialogs.rb:246 +#: src/include/geo-cluster/dialogs.rb:246 msgid "retries" msgstr "재시도" -#: src/include/geo-cluster/dialogs.rb:248 +#: src/include/geo-cluster/dialogs.rb:248 msgid "weights" msgstr "가중치" -#: src/include/geo-cluster/dialogs.rb:250 +#: src/include/geo-cluster/dialogs.rb:250 msgid "expire" msgstr "만료" -#: src/include/geo-cluster/dialogs.rb:252 +#: src/include/geo-cluster/dialogs.rb:252 msgid "acquire-after" msgstr "acquire-after" -#: src/include/geo-cluster/dialogs.rb:254 +#: src/include/geo-cluster/dialogs.rb:254 msgid "before-acquire-handler" msgstr "before-acquire 처리기" -#: src/include/geo-cluster/dialogs.rb:291 +#: src/include/geo-cluster/dialogs.rb:291 msgid "timeout is invalid" msgstr "시간 제한이 유효하지 않습니다." -#: src/include/geo-cluster/dialogs.rb:293 +#: src/include/geo-cluster/dialogs.rb:293 msgid "expire is invalid" msgstr "만료가 유효하지 않습니다." -#: src/include/geo-cluster/dialogs.rb:295 +#: src/include/geo-cluster/dialogs.rb:295 msgid "acquireafter is invalid" msgstr "acquireafter가 유효하지 않습니다." -#: src/include/geo-cluster/dialogs.rb:297 +#: src/include/geo-cluster/dialogs.rb:297 msgid "retries is invalid" msgstr "재시도가 유효하지 않습니다." -#: src/include/geo-cluster/dialogs.rb:299 +#: src/include/geo-cluster/dialogs.rb:299 msgid "retries values lower than 3 is illegal" msgstr "재시도 값은 3보다 작을 수 없습니다." -#: src/include/geo-cluster/dialogs.rb:301 +#: src/include/geo-cluster/dialogs.rb:301 msgid "weights is invalid" msgstr "가중치가 유효하지 않습니다." -#: src/include/geo-cluster/dialogs.rb:303 +#: src/include/geo-cluster/dialogs.rb:303 msgid "ticket can not be empty" msgstr "티켓은 비워둘 수 없습니다." -#. fill confs with global_files +#. fill confs with global_files #: src/include/geo-cluster/dialogs.rb:422 -#: src/include/geo-cluster/wizards.rb:48 +#: src/include/geo-cluster/wizards.rb:48 msgid "Firewall Configuration" msgstr "방화벽 구성" -#. Wizard::SetContentsButtons(caption, contents, HELPS["c2"]:"", -#. Label::BackButton(), Label::NextButton()); -#: src/include/geo-cluster/dialogs.rb:569 +#. Wizard::SetContentsButtons(caption, contents, HELPS["c2"]:"", +#. Label::BackButton(), Label::NextButton()); +#: src/include/geo-cluster/dialogs.rb:569 msgid "Enter an IP address of your arbitrator" msgstr "중재자의 IP 주소를 입력하십시오." -#: src/include/geo-cluster/dialogs.rb:580 +#: src/include/geo-cluster/dialogs.rb:580 msgid "Edit IP address of your arbitrator" msgstr "중재자의 IP 주소를 편집하십시오." -#: src/include/geo-cluster/dialogs.rb:596 +#: src/include/geo-cluster/dialogs.rb:596 msgid "Enter an IP address of your site" msgstr "사이트의 IP 주소 입력" -#: src/include/geo-cluster/dialogs.rb:607 +#: src/include/geo-cluster/dialogs.rb:607 msgid "Edit IP address of your site" msgstr "사이트의 IP 주소 편집" -#: src/include/geo-cluster/dialogs.rb:629 +#: src/include/geo-cluster/dialogs.rb:629 msgid "Ticket name already exist!" msgstr "티켓 이름이 이미 있습니다." -#. Validation check before switch to authentication -#. Still fall to :authentication or :ok -#: src/include/geo-cluster/dialogs.rb:661 +#. Validation check before switch to authentication +#. Still fall to :authentication or :ok +#: src/include/geo-cluster/dialogs.rb:661 msgid "Configuration name can not be empty." msgstr "구성 이름은 비워둘 수 없습니다." -#: src/include/geo-cluster/dialogs.rb:664 +#: src/include/geo-cluster/dialogs.rb:664 msgid "Configuration name can not be duplicated." msgstr "구성 이름을 복제할 수 없습니다." -#. "5405d4" will show like "5405" -#: src/include/geo-cluster/dialogs.rb:672 +#. "5405d4" will show like "5405" +#: src/include/geo-cluster/dialogs.rb:672 msgid "port is invalid!" msgstr "포트가 잘못되었습니다." -#: src/include/geo-cluster/dialogs.rb:678 +#: src/include/geo-cluster/dialogs.rb:678 msgid "transport have to be filled!" msgstr "전송을 입력해야 합니다." -#. Same to UI.QueryWidget(:arbitrator_box, :Value).to_s == "" -#: src/include/geo-cluster/dialogs.rb:684 +#. Same to UI.QueryWidget(:arbitrator_box, :Value).to_s == "" +#: src/include/geo-cluster/dialogs.rb:684 msgid "arbitrator have to be filled!" msgstr "중재자는 반드시 입력해야 합니다." -#: src/include/geo-cluster/dialogs.rb:689 +#: src/include/geo-cluster/dialogs.rb:689 msgid "site have to be filled!" msgstr "사이트를 입력해야 합니다." -#: src/include/geo-cluster/dialogs.rb:694 +#: src/include/geo-cluster/dialogs.rb:694 msgid "ticket have to be filled!" msgstr "티켓을 입력해야 합니다." -#. Validation check before switch to basic -#. Still fall to :basic or :ok -#: src/include/geo-cluster/dialogs.rb:748 +#. Validation check before switch to basic +#. Still fall to :basic or :ok +#: src/include/geo-cluster/dialogs.rb:748 msgid "Failed to create authentication file " msgstr "인증 파일을 생성하지 못했습니다. " -#: src/include/geo-cluster/dialogs.rb:751 +#: src/include/geo-cluster/dialogs.rb:751 msgid "Authentication file " msgstr "인증 파일" -#: src/include/geo-cluster/dialogs.rb:751 +#: src/include/geo-cluster/dialogs.rb:751 msgid " created successfully." msgstr " 생성되었습니다." -#. GeoCluster choose configure dialog caption -#: src/include/geo-cluster/dialogs.rb:810 +#. GeoCluster choose configure dialog caption +#: src/include/geo-cluster/dialogs.rb:810 msgid "GeoCluster Configuration Select" msgstr "GeoCluster 구성 선택" -#. Wizard::SetContentsButtons(caption, contents, HELPS["c2"]:"", -#. Label::BackButton(), Label::NextButton()); -#: src/include/geo-cluster/dialogs.rb:816 +#. Wizard::SetContentsButtons(caption, contents, HELPS["c2"]:"", +#. Label::BackButton(), Label::NextButton()); +#: src/include/geo-cluster/dialogs.rb:816 msgid "Choose configuration file:" msgstr "구성 파일 선택:" -#: src/include/geo-cluster/wizards.rb:47 +#: src/include/geo-cluster/wizards.rb:47 msgid "Authentication Configuration" msgstr "인증 구성" -#. Initialization dialog contents -#: src/include/geo-cluster/wizards.rb:143 +#. Initialization dialog contents +#: src/include/geo-cluster/wizards.rb:143 msgid "Initializing..." msgstr "초기화 중..." -#. SCR won't write authfile when empty("") -#. Convert relative path to absolute path -#: src/modules/GeoCluster.rb:235 +#. SCR won't write authfile when empty("") +#. Convert relative path to absolute path +#: src/modules/GeoCluster.rb:235 msgid "Cannot write global conf settings." msgstr "전역 구성 설정을 기록할 수 없습니다." -#. List like site -#: src/modules/GeoCluster.rb:253 +#. List like site +#: src/modules/GeoCluster.rb:253 msgid "Cannot write global settings." msgstr "전역 설정을 작성할 수 없습니다." -#. Empty (all Int) ticket will be ignore by ag_booth -#. Create a ticket item -#: src/modules/GeoCluster.rb:277 +#. Empty (all Int) ticket will be ignore by ag_booth +#. Create a ticket item +#: src/modules/GeoCluster.rb:277 msgid "Cannot write global ticket settings." msgstr "전역 티켓 설정을 기록할 수 없습니다." -#. GeoCluster read dialog caption -#: src/modules/GeoCluster.rb:284 +#. GeoCluster read dialog caption +#: src/modules/GeoCluster.rb:284 msgid "Initializing Geo Cluster Configuration" msgstr "Geo Cluster 구성 초기화 중" -#. #-#-#-#-# geo-cluster.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. TODO FIXME Names of real stages -#. We do not set help text here, because it was set outside -#. #-#-#-#-# geo-cluster.xgettext.pot #-#-#-#-# -#. Progress stage 2/3 -#: src/modules/GeoCluster.rb:297 src/modules/GeoCluster2.pm:143 +#. #-#-#-#-# geo-cluster.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. TODO FIXME Names of real stages +#. We do not set help text here, because it was set outside +#. #-#-#-#-# geo-cluster.xgettext.pot #-#-#-#-# +#. Progress stage 2/3 +#: src/modules/GeoCluster.rb:297 src/modules/GeoCluster2.pm:143 msgid "Read the previous settings" msgstr "이전의 설정 읽기" -#: src/modules/GeoCluster.rb:297 src/modules/GeoCluster.rb:300 +#: src/modules/GeoCluster.rb:297 src/modules/GeoCluster.rb:300 msgid "Read SuSEFirewall Settings" msgstr "SuSEFirewall 설정 읽기" -#. #-#-#-#-# geo-cluster.xgettext.pot #-#-#-#-# -#. Progress step 2/3 -#: src/modules/GeoCluster.rb:299 src/modules/GeoCluster2.pm:150 +#. #-#-#-#-# geo-cluster.xgettext.pot #-#-#-#-# +#. Progress step 2/3 +#: src/modules/GeoCluster.rb:299 src/modules/GeoCluster2.pm:150 msgid "Reading the previous settings..." msgstr "이전 설정값을 읽고 있습니다..." -#. Progress finished -#: src/modules/GeoCluster.rb:301 src/modules/GeoCluster.rb:369 -#: src/modules/GeoCluster2.pm:154 src/modules/GeoCluster2.pm:232 +#. Progress finished +#: src/modules/GeoCluster.rb:301 src/modules/GeoCluster.rb:369 +#: src/modules/GeoCluster2.pm:154 src/modules/GeoCluster2.pm:232 msgid "Finished" msgstr "완료됨" -#. GeoCluster write dialog caption -#: src/modules/GeoCluster.rb:343 +#. GeoCluster write dialog caption +#: src/modules/GeoCluster.rb:343 msgid "Saving Geo Cluster Configuration" msgstr "Geo Cluster 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/GeoCluster.rb:359 src/modules/GeoCluster2.pm:223 +#. Progress stage 1/2 +#: src/modules/GeoCluster.rb:359 src/modules/GeoCluster2.pm:223 msgid "Write the settings" msgstr "세팅 기록" -#. Progress stage 2/2 -#: src/modules/GeoCluster.rb:361 +#. Progress stage 2/2 +#: src/modules/GeoCluster.rb:361 msgid "Write the SuSEfirewall settings" msgstr "SuSEfirewall 설정 작성" -#. Progress step 1/2 -#: src/modules/GeoCluster.rb:365 src/modules/GeoCluster2.pm:228 +#. Progress step 1/2 +#: src/modules/GeoCluster.rb:365 src/modules/GeoCluster2.pm:228 msgid "Writing the settings..." msgstr "세팅을 기록하고 있습니다..." -#. Progress step 2/2 -#: src/modules/GeoCluster.rb:367 +#. Progress step 2/2 +#: src/modules/GeoCluster.rb:367 msgid "Writing the SuSEFirewall settings" msgstr "SuSEFirewall 설정 작성" -#. #-#-#-#-# geo-cluster.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. Error message -#: src/modules/GeoCluster.rb:390 src/modules/GeoCluster2.pm:242 +#. #-#-#-#-# geo-cluster.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. Error message +#: src/modules/GeoCluster.rb:390 src/modules/GeoCluster2.pm:242 msgid "Cannot write settings." msgstr "설정을 기록할 수 없습니다." -#. TODO FIXME: your code here... -#. Configuration summary text for autoyast -#: src/modules/GeoCluster.rb:451 +#. TODO FIXME: your code here... +#. Configuration summary text for autoyast +#: src/modules/GeoCluster.rb:451 msgid "Configuration summary..." msgstr "구성 요약..." -#. GeoCluster read dialog caption -#: src/modules/GeoCluster2.pm:129 +#. GeoCluster read dialog caption +#: src/modules/GeoCluster2.pm:129 msgid "Initializing geo-cluster Configuration" msgstr "geo-cluster 구성 초기화" -#. Progress stage 1/3 -#: src/modules/GeoCluster2.pm:141 +#. Progress stage 1/3 +#: src/modules/GeoCluster2.pm:141 msgid "Read the database" msgstr "데이타베이스 읽기" -#. Progress stage 3/3 -#: src/modules/GeoCluster2.pm:145 +#. Progress stage 3/3 +#: src/modules/GeoCluster2.pm:145 msgid "Detect the devices" msgstr "장치 검색" -#. Progress step 1/3 -#: src/modules/GeoCluster2.pm:148 +#. Progress step 1/3 +#: src/modules/GeoCluster2.pm:148 msgid "Reading the database..." msgstr "데이타 베이스를 읽고 있습니다..." -#. Progress step 3/3 -#: src/modules/GeoCluster2.pm:152 +#. Progress step 3/3 +#: src/modules/GeoCluster2.pm:152 msgid "Detecting the devices..." msgstr "장치를 검색하고 중..." -#: src/modules/GeoCluster2.pm:164 +#: src/modules/GeoCluster2.pm:164 msgid "Cannot read the database1." msgstr "데이터베이스1을 읽을 수 없습니다." -#: src/modules/GeoCluster2.pm:173 +#: src/modules/GeoCluster2.pm:173 msgid "Cannot read the database2." msgstr "데이터베이스2를 읽을 수 없습니다." -#: src/modules/GeoCluster2.pm:191 +#: src/modules/GeoCluster2.pm:191 msgid "Cannot detect devices." msgstr "장치를 검색할 수 없습니다." -#. GeoCluster read dialog caption -#: src/modules/GeoCluster2.pm:211 +#. GeoCluster read dialog caption +#: src/modules/GeoCluster2.pm:211 msgid "Saving geo-cluster Configuration" msgstr "geo-cluster 구성 저장" -#. Progress stage 2/2 -#: src/modules/GeoCluster2.pm:225 +#. Progress stage 2/2 +#: src/modules/GeoCluster2.pm:225 msgid "Run SuSEconfig" msgstr "SuSEconfig 실행" -#. Progress step 2/2 -#: src/modules/GeoCluster2.pm:230 +#. Progress step 2/2 +#: src/modules/GeoCluster2.pm:230 msgid "Running SuSEconfig..." msgstr "SuSEconfig 실행중입니다..." -#: src/modules/GeoCluster2.pm:295 +#: src/modules/GeoCluster2.pm:295 msgid "Configuration summary ..." msgstr "구성 요약..." Modified: branches/SLE12-SP3/yast/ko/po/http-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/http-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/http-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,121 +14,121 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help for HTTP server module -#: src/clients/http-server.rb:36 +#. translators: command line help for HTTP server module +#: src/clients/http-server.rb:36 msgid "Configuration of HTTP server (Apache2)" msgstr "HTTP 서버 구성 (Apache2)" -#. translators: help text for configure command line action -#: src/clients/http-server.rb:45 +#. translators: help text for configure command line action +#: src/clients/http-server.rb:45 msgid "Configure host settings" msgstr "호스트 셋팅 구성" -#. translators: help text for modules command line action -#: src/clients/http-server.rb:55 +#. translators: help text for modules command line action +#: src/clients/http-server.rb:55 msgid "Configure the Apache2 server modules" msgstr "Apache2 서버모듈 설정" -#. translators: help text for listen command line action -#: src/clients/http-server.rb:65 +#. translators: help text for listen command line action +#: src/clients/http-server.rb:65 msgid "Set up the ports and network addresses where the server should listen." msgstr "listen 해야하는 포트와 네트워크 주소들을 설정 하십시오." -#: src/clients/http-server.rb:74 +#: src/clients/http-server.rb:74 msgid "Configure virtual hosts" msgstr "가상 호스트 구성" -#: src/clients/http-server.rb:81 +#: src/clients/http-server.rb:81 msgid "Enable or disable wizard mode." msgstr "마법사 모드를 활성화하거나 비활성화합니다." -#. translators: help text for servername option (configure command line action) -#: src/clients/http-server.rb:92 +#. translators: help text for servername option (configure command line action) +#: src/clients/http-server.rb:92 msgid "Server name, for example, www.example.com" msgstr "서버 이름, 예를 들어, www.example.com" -#. translators: help text for serveradmin option (configure command line action) -#: src/clients/http-server.rb:99 +#. translators: help text for serveradmin option (configure command line action) +#: src/clients/http-server.rb:99 msgid "E-mail address of the server administrator" msgstr "서버관리자의 메일주소" -#. translators: help text for documentroot option (configure command line action) -#: src/clients/http-server.rb:106 +#. translators: help text for documentroot option (configure command line action) +#: src/clients/http-server.rb:106 msgid "Directory where the documents of the server are stored" msgstr "서버의 Document가 저장된 디렉토리" -#. translators: help text for host option (configure command line action) -#: src/clients/http-server.rb:113 +#. translators: help text for host option (configure command line action) +#: src/clients/http-server.rb:113 msgid "Name of the host to configure." msgstr "구성할 호스트 이름." -#. translators: help text for add subcommand (listen command line action) -#: src/clients/http-server.rb:121 +#. translators: help text for add subcommand (listen command line action) +#: src/clients/http-server.rb:121 msgid "Add a new listen entry ([address:]port)" msgstr "새로운 listen 엔트리를 추가합니다. ([address:]port)" -#. translators: help text for delete subcommand (listen command line action) -#: src/clients/http-server.rb:129 +#. translators: help text for delete subcommand (listen command line action) +#: src/clients/http-server.rb:129 msgid "Delete an existing listen entry ([address:]port)" msgstr "존재하는 listen 엔트리를 삭제합니다.([address:]port)" -#. translators: help text for list subcommand (listen command line action) -#: src/clients/http-server.rb:135 +#. translators: help text for list subcommand (listen command line action) +#: src/clients/http-server.rb:135 msgid "List configured entries" msgstr "구성된 항목을 나열합니다." -#. translators: help text for enable subcommand (modules command line action) -#: src/clients/http-server.rb:143 +#. translators: help text for enable subcommand (modules command line action) +#: src/clients/http-server.rb:143 msgid "Comma-separated list of modules to enable" msgstr "작동하기 위한 모듈의 콤마 구분자 리스트" -#. translators: help text for disable subcommand (modules command line action) -#: src/clients/http-server.rb:151 +#. translators: help text for disable subcommand (modules command line action) +#: src/clients/http-server.rb:151 msgid "Comma-separated list of modules to disable" msgstr "비작동하기 위한 모듈의 콤마 구분자 리스트" -#: src/clients/http-server.rb:155 +#: src/clients/http-server.rb:155 msgid "Create new virtual host" msgstr "새 가상 호스트 작성" -#: src/clients/http-server.rb:158 +#: src/clients/http-server.rb:158 msgid "Delete existing virtual host" msgstr "기존 가상 호스트 삭제" -#: src/clients/http-server.rb:162 +#: src/clients/http-server.rb:162 msgid "Set selected virtual host as default host" msgstr "선택한 가상 호스트를 기본 호스트로 설정" -#: src/clients/http-server.rb:166 +#: src/clients/http-server.rb:166 msgid "Set wizard mode \"on\" or \"off\"." msgstr "마법사 모드 \"켜기\" 또는 \"끄기\"를 지정합니다." -#. translators: error message in configure command line action -#: src/clients/http-server.rb:238 +#. translators: error message in configure command line action +#: src/clients/http-server.rb:238 msgid "Configured host not specified" msgstr "구성된 호스트가 지정되지 않았습니다." -#. translators: error message in configure command line action -#: src/clients/http-server.rb:242 +#. translators: error message in configure command line action +#: src/clients/http-server.rb:242 msgid "Only existing hosts can be specified as the host to configure" msgstr "구성할 호스트로는 기존 호스트만을 지정할 수 있습니다." -#. translators: popup error message when validate servername -#: src/clients/http-server.rb:275 src/modules/HttpServerWidgets.rb:885 +#. translators: popup error message when validate servername +#: src/clients/http-server.rb:275 src/modules/HttpServerWidgets.rb:885 msgid "Invalid server name." msgstr "서버 이름이 잘못되었습니다." -#: src/clients/http-server.rb:288 +#: src/clients/http-server.rb:288 msgid "Invalid server admin." msgstr "서버 관리자가 잘못되었습니다." -#: src/clients/http-server.rb:311 src/clients/http-server.rb:500 +#: src/clients/http-server.rb:311 src/clients/http-server.rb:500 msgid "Validate error " msgstr "오류 확인" -#. translators: heading for the "modules list" command line action output -#. please, try to align the texts if possible. -#: src/clients/http-server.rb:339 +#. translators: heading for the "modules list" command line action output +#. please, try to align the texts if possible. +#: src/clients/http-server.rb:339 msgid "" "Status \tModule\n" "==================" @@ -136,190 +136,183 @@ "상태들 \tModule\n" "==================" -#. translators: server module status -#. translators: service status radio button label -#. if ((mod["default"]:"0" == "1") && (!contains(modules, name))) YaST::HTTPDData::ModifyModuleList ([name], true); -#. translators: server module status -#. string status = (string) select( (term) UI::QueryWidget( `id(`modules), `Item(ci) ), 2, _("Enabled") ); -#. string name = (string) select( (term) UI::QueryWidget( `id(`modules), `Item(ci) ), 1, nil ); -#: src/clients/http-server.rb:350 src/modules/HttpServerWidgets.rb:357 -#: src/modules/HttpServerWidgets.rb:3067 -#: src/modules/HttpServerWidgets.rb:3090 -#: src/modules/HttpServerWidgets.rb:3137 -#: src/modules/HttpServerWidgets.rb:3146 -#: src/modules/HttpServerWidgets.rb:3149 -#: src/modules/HttpServerWidgets.rb:3153 -#: src/modules/HttpServerWidgets.rb:3182 +#. translators: server module status +#. translators: service status radio button label +#. if ((mod["default"]:"0" == "1") && (!contains(modules, name))) YaST::HTTPDData::ModifyModuleList ([name], true); +#. translators: server module status +#. string status = (string) select( (term) UI::QueryWidget( `id(`modules), `Item(ci) ), 2, _("Enabled") ); +#. string name = (string) select( (term) UI::QueryWidget( `id(`modules), `Item(ci) ), 1, nil ); +#: src/clients/http-server.rb:350 src/modules/HttpServerWidgets.rb:357 +#: src/modules/HttpServerWidgets.rb:3067 src/modules/HttpServerWidgets.rb:3090 +#: src/modules/HttpServerWidgets.rb:3137 src/modules/HttpServerWidgets.rb:3146 +#: src/modules/HttpServerWidgets.rb:3149 src/modules/HttpServerWidgets.rb:3153 +#: src/modules/HttpServerWidgets.rb:3182 msgid "Enabled" msgstr "활성화" -#. translators: server module status -#. translators: service status radio button label -#. translators: server module status -#: src/clients/http-server.rb:352 src/modules/HttpServerWidgets.rb:355 -#: src/modules/HttpServerWidgets.rb:3069 -#: src/modules/HttpServerWidgets.rb:3147 -#: src/modules/HttpServerWidgets.rb:3169 +#. translators: server module status +#. translators: service status radio button label +#. translators: server module status +#: src/clients/http-server.rb:352 src/modules/HttpServerWidgets.rb:355 +#: src/modules/HttpServerWidgets.rb:3069 src/modules/HttpServerWidgets.rb:3147 +#: src/modules/HttpServerWidgets.rb:3169 msgid "Disabled" msgstr "비활성화" -#. y2milestone("Ruby support %1", enable_ruby); -#. create list of all standard modules -#. create temporary list of maps from modules -#. translators: list of known and unknown modules -#. translators: server module status unknown -#. list of all installed modules -#: src/clients/http-server.rb:353 -#: src/include/http-server/wizard-dialog.rb:167 -#: src/modules/HttpServerWidgets.rb:3040 -#: src/modules/HttpServerWidgets.rb:3050 -#: src/modules/HttpServerWidgets.rb:3051 -#: src/modules/HttpServerWidgets.rb:3060 -#: src/modules/HttpServerWidgets.rb:3209 +#. y2milestone("Ruby support %1", enable_ruby); +#. create list of all standard modules +#. create temporary list of maps from modules +#. translators: list of known and unknown modules +#. translators: server module status unknown +#. list of all installed modules +#: src/clients/http-server.rb:353 src/include/http-server/wizard-dialog.rb:167 +#: src/modules/HttpServerWidgets.rb:3040 src/modules/HttpServerWidgets.rb:3050 +#: src/modules/HttpServerWidgets.rb:3051 src/modules/HttpServerWidgets.rb:3060 +#: src/modules/HttpServerWidgets.rb:3209 msgid "unknown" msgstr "알수없음" -#. translators: heading for the "listen list" command line action output -#. please, try to align the texts if possible. -#: src/clients/http-server.rb:376 +#. translators: heading for the "listen list" command line action output +#. please, try to align the texts if possible. +#: src/clients/http-server.rb:376 msgid "Listen Statements:" msgstr "Listen 문:" -#: src/clients/http-server.rb:382 +#: src/clients/http-server.rb:382 msgid "All interfaces" msgstr "모든 인터페이스" -#. FIXME: check, if new address and port are correct values (if address is from machine's interfaces) -#: src/clients/http-server.rb:416 +#. FIXME: check, if new address and port are correct values (if address is from machine's interfaces) +#: src/clients/http-server.rb:416 msgid "Can use only existing interfaces" msgstr "기존 인터페이스만 사용 가능" -#. translators: error message in "listen add" command line action -#: src/clients/http-server.rb:423 +#. translators: error message in "listen add" command line action +#: src/clients/http-server.rb:423 msgid "The listen statement '%1' is already configured." msgstr "Listen 문 '%1'은(는) 이미 구성되었습니다." -#. translators: error message in "listen delete" command line action -#: src/clients/http-server.rb:438 +#. translators: error message in "listen delete" command line action +#: src/clients/http-server.rb:438 msgid "Can remove only existing listeners" msgstr "기존 수신 대기자만 제거할 수 있습니다." -#. check the command to be present exactly once -#: src/clients/http-server.rb:460 +#. check the command to be present exactly once +#: src/clients/http-server.rb:460 msgid "Hosts list:" msgstr "호스트 목록:" -#. create -#: src/clients/http-server.rb:471 +#. create +#: src/clients/http-server.rb:471 msgid "Some parameter missing" msgstr "일부 매개변수가 누락되었습니다." -#. remove and setdefault -#: src/clients/http-server.rb:520 +#. remove and setdefault +#: src/clients/http-server.rb:520 msgid "Argument can be only existing host" msgstr "기존 호스트만이 인수가 될 수 있습니다." -#. popup - it is already the default host -#: src/clients/http-server.rb:526 src/modules/HttpServerWidgets.rb:1324 +#. popup - it is already the default host +#: src/clients/http-server.rb:526 src/modules/HttpServerWidgets.rb:1324 msgid "The host is already default." msgstr "이 호스트는 이미 기본 호스트로 설정되어 있습니다." -#. remove the old non-default host -#. translators: popup error message - default host cannot be deleted -#: src/clients/http-server.rb:559 src/modules/HttpServerWidgets.rb:1242 +#. remove the old non-default host +#. translators: popup error message - default host cannot be deleted +#: src/clients/http-server.rb:559 src/modules/HttpServerWidgets.rb:1242 msgid "Cannot delete the default host." msgstr "기본 호스트를 삭제할 수 없습니다." -#. encoding: utf-8 -#. File: include/http-server/wizards.ycp -#. Package: Configuration of http-server -#. Summary: Wizards definitions -#. Authors: Stanislav Visnovsky -#. -#. $Id$ -#: src/include/http-server/dialogs.rb:32 +#. encoding: utf-8 +#. File: include/http-server/wizards.ycp +#. Package: Configuration of http-server +#. Summary: Wizards definitions +#. Authors: Stanislav Visnovsky +#. +#. $Id$ +#: src/include/http-server/dialogs.rb:32 msgid "Listen Ports and Addresses" msgstr "수신 포트 및 주소" -#. `HSpacing (1), -#: src/include/http-server/dialogs.rb:57 +#. `HSpacing (1), +#: src/include/http-server/dialogs.rb:57 msgid "Server Modules" msgstr "서버 모듈들" -#. translators: human-readable "default host" -#: src/include/http-server/dialogs.rb:66 -#: src/include/http-server/dialogs.rb:172 +#. translators: human-readable "default host" +#: src/include/http-server/dialogs.rb:66 +#: src/include/http-server/dialogs.rb:172 msgid "Main Host" msgstr "주 호스트" -#: src/include/http-server/dialogs.rb:75 +#: src/include/http-server/dialogs.rb:75 msgid "Hosts" msgstr "호스트" -#. Run server overview dialog -#. @return [Symbol] for wizard sequencer -#. translators: initialization dialog caption -#: src/include/http-server/dialogs.rb:108 -#: src/include/http-server/wizards.rb:200 +#. Run server overview dialog +#. @return [Symbol] for wizard sequencer +#. translators: initialization dialog caption +#: src/include/http-server/dialogs.rb:108 +#: src/include/http-server/wizards.rb:200 msgid "HTTP Server Configuration" msgstr "HTTP 서버 구성" -#. translators: dialog caption -#: src/include/http-server/dialogs.rb:169 +#. translators: dialog caption +#: src/include/http-server/dialogs.rb:169 msgid "Host '%1' Configuration" msgstr "'%1' 호스트 설정" -#. dialog caption -#: src/include/http-server/dialogs.rb:212 +#. dialog caption +#: src/include/http-server/dialogs.rb:212 msgid "Configured Hosts" msgstr "구성된 호스트" -#. translators: dialog caption -#: src/include/http-server/dialogs.rb:243 +#. translators: dialog caption +#: src/include/http-server/dialogs.rb:243 msgid "New Host Information" msgstr "새 호스트 정보" -#. translators: dialog caption -#: src/include/http-server/dialogs.rb:269 +#. translators: dialog caption +#: src/include/http-server/dialogs.rb:269 msgid "Virtual Host Details" msgstr "가상 호스트 세부 사항" -#. translators: dialog caption, %1 is the host name -#: src/include/http-server/dialogs.rb:299 +#. translators: dialog caption, %1 is the host name +#: src/include/http-server/dialogs.rb:299 msgid "SSL Configuration for '%1'" msgstr "'%1'에 대한 SSL 구성" -#. translators: human-readable "default host" -#. translators: human-readable "default host" -#. translators: human-readable "default host" -#: src/include/http-server/dialogs.rb:302 -#: src/include/http-server/dialogs.rb:357 -#: src/modules/HttpServerWidgets.rb:1273 +#. translators: human-readable "default host" +#. translators: human-readable "default host" +#. translators: human-readable "default host" +#: src/include/http-server/dialogs.rb:302 +#: src/include/http-server/dialogs.rb:357 +#: src/modules/HttpServerWidgets.rb:1273 msgid "Default Host" msgstr "기본 호스트(&E)" -#. translators: pop up menu -#: src/include/http-server/dialogs.rb:324 +#. translators: pop up menu +#: src/include/http-server/dialogs.rb:324 msgid "Certificates" msgstr "인증서" -#. translators: Certificates pop-up menu item -#: src/include/http-server/dialogs.rb:327 +#. translators: Certificates pop-up menu item +#: src/include/http-server/dialogs.rb:327 msgid "&Import Server Certificate..." msgstr "서버 인증서 임포트(&I)..." -#. translators: Certificates pop-up menu item -#: src/include/http-server/dialogs.rb:329 +#. translators: Certificates pop-up menu item +#: src/include/http-server/dialogs.rb:329 msgid "&Use Common Server Certificate" msgstr "일반 서버 인증서 사용(&U)" -#. translators: dialog caption, %1 is the host name -#: src/include/http-server/dialogs.rb:354 +#. translators: dialog caption, %1 is the host name +#: src/include/http-server/dialogs.rb:354 msgid "Dir Configuration for '%1'" msgstr "'%1'에 대한 디렉토리 구성" -#. Read dialog help 1/2 -#: src/include/http-server/helps.rb:18 +#. Read dialog help 1/2 +#: src/include/http-server/helps.rb:18 msgid "" "<p><b><big>Initializing HTTP Server Configuration</big></b>\n" "<br>\n" @@ -328,8 +321,8 @@ "<p><b><big>HTTP 서버설정을 초기화합니다</big></b>\n" "잠시 기다려주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/http-server/helps.rb:24 +#. Read dialog help 2/2 +#: src/include/http-server/helps.rb:24 msgid "" "<p><b><big>Aborting Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -337,8 +330,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/http-server/helps.rb:28 +#. Write dialog help 1/2 +#: src/include/http-server/helps.rb:28 msgid "" "<p><b><big>Saving HTTP Server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -346,8 +339,8 @@ "<p><b><big>HTTP 서버설정을 저장합니다</big></b><br>\n" "잠시 기다려주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/http-server/helps.rb:32 +#. Write dialog help 2/2 +#: src/include/http-server/helps.rb:32 msgid "" "<p><b><big>Aborting Saving</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -358,60 +351,43 @@ " 대화 상자가 추가로 나타나서 지금 중단하는 것이 안전한지 알려줍니다.\n" " </p>\n" -#. translators: Wizard dialog 1/5 -#: src/include/http-server/helps.rb:38 -msgid "" -"<p>The <b>Port</b> value defines the port on which Apache2 listens. The " -"default is 80.</p>" -msgstr "" -"<p><b>포트</b> 값은 Apache2가 수신 대기하는 포트를 정의합니다. 기본값은 80입" -"니다.</p>" +#. translators: Wizard dialog 1/5 +#: src/include/http-server/helps.rb:38 +msgid "<p>The <b>Port</b> value defines the port on which Apache2 listens. The default is 80.</p>" +msgstr "<p><b>포트</b> 값은 Apache2가 수신 대기하는 포트를 정의합니다. 기본값은 80입니다.</p>" -#. translators: Wizard dialog 1/5 -#: src/include/http-server/helps.rb:42 -msgid "" -"<p><b>Listen on Interfaces</b> contains the list of all IP addresses " -"configured for this host. Checked IP addresses are those on which Apache2 " -"listens. If you are unsure, check all.</p>" -msgstr "" -"<p><b>수신 대기 인터페이스</b>에는 이 호스트에 대해 구성된 모든 IP 주소 목록" -"이 포함되어 있습니다. Apache2가 수신 대기하는 IP 주소들이 검사 대상입니다. 이" -"것만으로 부족할 경우 모두 검사하십시오.</p>" +#. translators: Wizard dialog 1/5 +#: src/include/http-server/helps.rb:42 +msgid "<p><b>Listen on Interfaces</b> contains the list of all IP addresses configured for this host. Checked IP addresses are those on which Apache2 listens. If you are unsure, check all.</p>" +msgstr "<p><b>수신 대기 인터페이스</b>에는 이 호스트에 대해 구성된 모든 IP 주소 목록이 포함되어 있습니다. Apache2가 수신 대기하는 IP 주소들이 검사 대상입니다. 이것만으로 부족할 경우 모두 검사하십시오.</p>" -#. translators: Wizard dialog 2/5 -#: src/include/http-server/helps.rb:46 -msgid "" -"<p>Here, enable the script languages the Apache2 server should support.</p>" -msgstr "" -"<p>여기서는 Apache2 서버에서 지원해야 할 스크립트 언어를 활성화합니다.</p>" +#. translators: Wizard dialog 2/5 +#: src/include/http-server/helps.rb:46 +msgid "<p>Here, enable the script languages the Apache2 server should support.</p>" +msgstr "<p>여기서는 Apache2 서버에서 지원해야 할 스크립트 언어를 활성화합니다.</p>" -#. translators: Wizard dialog 5/5 -#: src/include/http-server/helps.rb:50 -msgid "" -"<p>The summary displays the settings that will be written to the Apache2 " -"configuration when you press <b>Finish</b>.</p>" -msgstr "" -"<p>요약에는 <b>완료</b>를 누르면 Apache2 구성에 기록될 설정이 표시됩니다.</p>" +#. translators: Wizard dialog 5/5 +#: src/include/http-server/helps.rb:50 +msgid "<p>The summary displays the settings that will be written to the Apache2 configuration when you press <b>Finish</b>.</p>" +msgstr "<p>요약에는 <b>완료</b>를 누르면 Apache2 구성에 기록될 설정이 표시됩니다.</p>" -#. translators: Wizard dialog 5/5 -#: src/include/http-server/helps.rb:54 +#. translators: Wizard dialog 5/5 +#: src/include/http-server/helps.rb:54 msgid "" "<p>Press <b>HTTP Server Expert Configuration</b> \n" -"\t\tto create a more detailed configuration before writing the configuration." -"</p>" +"\t\tto create a more detailed configuration before writing the configuration.</p>" msgstr "" "<p>구성을 기록하기 전에 좀 더 자세히 구성을 설정하려면\n" "\t\t<b>HTTP 서버 고급 구성</b>을 누르십시오.</p>" -#. module dialog help 1/3 -#: src/include/http-server/helps.rb:58 +#. module dialog help 1/3 +#: src/include/http-server/helps.rb:58 msgid "" "<p><b><big>Editing HTTP Server Modules</big></b><br>\n" "The table contains a list of all available Apache2 modules.\n" "The first column contains the name of the module. \n" "The second column shows whether the module should be\n" -"loaded by the server. Enabled modules will be loaded. The last column " -"displays a short description\n" +"loaded by the server. Enabled modules will be loaded. The last column displays a short description\n" "of the module.</p>" msgstr "" "<p><b><big>HTTP 서버 모듈 편집</big></b><br>\n" @@ -421,18 +397,17 @@ "표시됩니다. 활성화된 모듈이 로드됩니다. 마지막 열에는\n" "해당 모듈에 대한 간략한 설명이 표시됩니다.</p>" -#. module dialog help 2/3 -#: src/include/http-server/helps.rb:67 +#. module dialog help 2/3 +#: src/include/http-server/helps.rb:67 msgid "" "<p>To change the status of a module, \n" -"choose the appropriate entry of the table and click <b>Toggle Status</b>.\n" +"choose the appropriate entry of the table and click <b>Toggle Status</b>.</p>\n" msgstr "" "<p>모듈의 상태변경, \n" "테이블에서 적절한 엔트리를 선택하고 <b>상태변경</b>을 선택하세요.</p>\n" -#. module dialog help 3/3 -#: src/include/http-server/helps.rb:71 +#. module dialog help 3/3 +#: src/include/http-server/helps.rb:71 msgid "" "<p>If you need to add a module not listed in the table, \n" "use <b>Add Module</b>.</p>\n" @@ -440,20 +415,19 @@ "<p>테이블에 없는 모듈을 추가해야 할 경우 \n" "<b>모듈 추가</b>를 사용합니다.</p>\n" -#. apache service enabling help 1/1 -#: src/include/http-server/helps.rb:75 +#. apache service enabling help 1/1 +#: src/include/http-server/helps.rb:75 msgid "" "<p><b><big>HTTP Server Settings</big></b><br>\n" -"Activate the HTTP server by choosing <b>Enabled</b>. To deactivate it, " -"choose\n" +"Activate the HTTP server by choosing <b>Enabled</b>. To deactivate it, choose\n" "<b>Disabled</b>.</p>\n" msgstr "" "<p><b><big>HTTP 서버 설정</big></b><br>\n" "<b>활성화됨</b>을 선택하여 HTTP 서버를 활성화합니다. 비활성화하려면\n" "<b>비활성화됨</b>을 선택하십시오.</p>\n" -#. firewall adapting help 1/1 -#: src/include/http-server/helps.rb:81 +#. firewall adapting help 1/1 +#: src/include/http-server/helps.rb:81 msgid "" "<p>By enabling <b>Open Firewall on Selected Ports</b>, \n" "adapt the firewall according the ports on which Apache2 listens. \n" @@ -465,8 +439,8 @@ " 방화벽의 인터페이스는 추가 또는 삭제되지 않습니다. \n" " 이 옵션은 방화벽이 활성화된 경우에만 사용할 수 있습니다.</p>\n" -#. server configuration overview help 1/2 -#: src/include/http-server/helps.rb:88 +#. server configuration overview help 1/2 +#: src/include/http-server/helps.rb:88 msgid "" "<p>The list of options presents\n" "several parts of the server configuration. <b>Listen On</b>\n" @@ -492,109 +466,87 @@ " 경로가 표시됩니다.\n" " <b>호스트</b>에는 서버에 대해 구성된 호스트 목록이 포함되어 있습니다.</p>\n" -#. server configuration overview help 2/2 -#: src/include/http-server/helps.rb:102 -msgid "" -"<p>Choose an appropriate entry from the table and click <b>Edit</b> to " -"change settings.</p>" -msgstr "" -"<p>설정을 변경하려면 테이블에서 해당 항목을 선택한 다음 <b>편집</b>을 클릭합" -"니다.</p>" +#. server configuration overview help 2/2 +#: src/include/http-server/helps.rb:102 +msgid "<p>Choose an appropriate entry from the table and click <b>Edit</b> to change settings.</p>" +msgstr "<p>설정을 변경하려면 테이블에서 해당 항목을 선택한 다음 <b>편집</b>을 클릭합니다.</p>" -#. help of menu button for server configuration 1/1 -#: src/include/http-server/helps.rb:106 +#. help of menu button for server configuration 1/1 +#: src/include/http-server/helps.rb:106 msgid "<p><b>Log Files</b> displays server log files.</p>" msgstr "<p><b>로그 파일</b>은 서버 로그 파일을 표시합니다.</p>" -#. hosts list help 1/2 -#: src/include/http-server/helps.rb:108 +#. hosts list help 1/2 +#: src/include/http-server/helps.rb:108 msgid "" "<p><b><big>Configured Hosts</big></b><br>\n" "This is a list of already configured hosts. One of the hosts is \n" -"marked as default (the asterisk next to the server name). A default host is " -"used if no other host\n" +"marked as default (the asterisk next to the server name). A default host is used if no other host\n" "matches for an incoming request. To set a host as default,\n" "press <b>Set as Default</b>.</p>\n" msgstr "" "<p><b><big>구성된 호스트</big></b><br>\n" "이 목록에는 이미 구성된 호스트가 포함되어 있습니다. 이 중의 한 호스트가 \n" "기본 호스트로 표시됩니다(서버 이름 옆에 별표). 기본 호스트는 다른 호스트가\n" -"들어오는 요청에 맞지 않을 경우 사용됩니다. 특정 호스트를 기본 호스트로 설정하" -"려면\n" +"들어오는 요청에 맞지 않을 경우 사용됩니다. 특정 호스트를 기본 호스트로 설정하려면\n" "<b>기본값으로 설정</b>을 누르십시오.</p>\n" -#. hosts list help 2/2 -#: src/include/http-server/helps.rb:116 +#. hosts list help 2/2 +#: src/include/http-server/helps.rb:116 msgid "" -"<p>Choose an appropriate entry of the table and click <b>Edit</b> to change " -"the host.\n" -"To add a host, click <b>Add</b>. To remove a host, select it and click " -"<b>Delete</b>.</p>" +"<p>Choose an appropriate entry of the table and click <b>Edit</b> to change the host.\n" +"To add a host, click <b>Add</b>. To remove a host, select it and click <b>Delete</b>.</p>" msgstr "" -"<p>호스트를 변경하려면 테이블에서 해당 항목을 선택한 다음 <b>편집</b>을 클릭" -"합니다.\n" -"호스트를 추가하려면 <b>추가</b>를 클릭하고, 호스트를 제거하려면 해당 호스트" -"를 선택한 다음 <b>삭제</b>를 클릭합니다.</p>" +"<p>호스트를 변경하려면 테이블에서 해당 항목을 선택한 다음 <b>편집</b>을 클릭합니다.\n" +"호스트를 추가하려면 <b>추가</b>를 클릭하고, 호스트를 제거하려면 해당 호스트를 선택한 다음 <b>삭제</b>를 클릭합니다.</p>" -#. host editing help 1/2 -#: src/include/http-server/helps.rb:120 +#. host editing help 1/2 +#: src/include/http-server/helps.rb:120 msgid "" "<p><b><big>Host Configuration</big></b><br>\n" -"To edit the host settings, choose the appropriate entry of the table then " -"click <b>Edit</b>.\n" -"To add a new option, click <b>Add</b>. To remove an option, select it and " -"click <b>Delete</b>.</p>" +"To edit the host settings, choose the appropriate entry of the table then click <b>Edit</b>.\n" +"To add a new option, click <b>Add</b>. To remove an option, select it and click <b>Delete</b>.</p>" msgstr "" "<p><b><big>호스트 구성</big></b><br>\n" -"호스트 설정을 편집하려면 테이블에서 해당 항목을 선택한 다음 <b>편집</b>을 클" -"릭합니다.\n" -"새 옵션을 추가하려면 <b>추가</b>를 클릭하고, 옵션을 제거하려면 해당 옵션을 선" -"택한 다음 <b>삭제</b>를 클릭합니다.</p>" +"호스트 설정을 편집하려면 테이블에서 해당 항목을 선택한 다음 <b>편집</b>을 클릭합니다.\n" +"새 옵션을 추가하려면 <b>추가</b>를 클릭하고, 옵션을 제거하려면 해당 옵션을 선택한 다음 <b>삭제</b>를 클릭합니다.</p>" -#. host editing help 2/2 -#: src/include/http-server/helps.rb:126 +#. host editing help 2/2 +#: src/include/http-server/helps.rb:126 msgid "" "<p>The <b>Server Resolution</b> options set the resolution when using\n" -"\tvirtual hosts. However, when you choose <b>Resolution via HTTP Headers,\n" +"\tvirtual hosts. However, when you choose <b>Resolution via HTTP Headers</b>,\n" "\tthe default server will never be served requests to the IP address of\n" -"\ta name-based virtual host. If you plan to configure a SSL based vhost, use " -"<b>Resolution via IP address</b></p>" +"\ta name-based virtual host. If you plan to configure a SSL based vhost, use <b>Resolution via IP address</b></p>" msgstr "" "<p><b>서버 확인</b> 옵션은 가상 호스트를 사용하는 경우의\n" "\t확인을 설정합니다. 그러나 <b>HTTP 헤더를 통해 확인</b>을 선택하는 경우\n" "\t기본 서버에 이름 기반 가상 호스트의 IP 주소에\n" -"\t대한 요청이 제공되지 않습니다. SSL 기반 vhost를 구성하려는 경우 <b>IP 주소" -"를 통해 확인</b>을 사용하십시오.</p>" +"\t대한 요청이 제공되지 않습니다. SSL 기반 vhost를 구성하려는 경우 <b>IP 주소를 통해 확인</b>을 사용하십시오.</p>" -#. listen dialog editor help 1/2 -#: src/include/http-server/helps.rb:133 +#. listen dialog editor help 1/2 +#: src/include/http-server/helps.rb:133 msgid "" "<p><b><big><i>Listen</i> Settings for a Host</big></b><br>\n" -"The <i>Listen</i> directive allows selection of ports and network " -"interfaces\n" +"The <i>Listen</i> directive allows selection of ports and network interfaces\n" "where the HTTP server should listen for incoming requests.</p>\n" msgstr "" "<p><b><big><i>Listen</i>호스트를 위한 설정</big></b><br>\n" -"그 <i>Listen</i>는 직접적으로 포트와 그 HTTP 서버가 들어오는 요청들을 위해" -"서 들어야만 하는\n" +"그 <i>Listen</i>는 직접적으로 포트와 그 HTTP 서버가 들어오는 요청들을 위해서 들어야만 하는\n" "네트워크 인터페이스의 색션들을 허용 합니다.</p>\n" -#. listen dialog editor help 2/2 -#: src/include/http-server/helps.rb:139 +#. listen dialog editor help 2/2 +#: src/include/http-server/helps.rb:139 msgid "" -"<p>Choose an appropriate entry of the table and click <b>Edit</b> to change " -"the entry.\n" -"To add a new entry, click <b>Add</b>. To remove an entry, select it and " -"click <b>Delete</b>.</p>" +"<p>Choose an appropriate entry of the table and click <b>Edit</b> to change the entry.\n" +"To add a new entry, click <b>Add</b>. To remove an entry, select it and click <b>Delete</b>.</p>" msgstr "" -"<p>테이블에서 적절한 엔트리를 선택하고 변경하기위해 <b>편집</b>을 클릭하세" -"요.\n" +"<p>테이블에서 적절한 엔트리를 선택하고 변경하기위해 <b>편집</b>을 클릭하세요.\n" "새로운 엔트리를 추가하기 위해서는,<B>추가</B>를 클릭하세요.\n" "엔트리를 삭제하기 위해서는, <B>삭제</B> 클릭하세요.</P>" -#. ssl options dialog help 1/4 -#: src/include/http-server/helps.rb:143 +#. ssl options dialog help 1/4 +#: src/include/http-server/helps.rb:143 msgid "" "<p><b><big>SSL Configuration</big></b><br>\n" "This is a list of options related to the SSL (Secure Socket Layer) settings\n" @@ -606,36 +558,30 @@ "포함되어 있습니다. SSL을 사용하면 통신을 암호화하여 안전한 방식으로 \n" "호스트와 통신할 수 있습니다.</p>\n" -#. ssl options dialog help 2/4 -#: src/include/http-server/helps.rb:150 +#. ssl options dialog help 2/4 +#: src/include/http-server/helps.rb:150 msgid "" "<p>General behavior is determined by the SSL option. The host can\n" -"not support SSL at all (<tt>No SSL</tt>), allow both non-SSL and SSL access " -"(<tt>Allowed</tt>),\n" +"not support SSL at all (<tt>No SSL</tt>), allow both non-SSL and SSL access (<tt>Allowed</tt>),\n" "or accept only connections encrypted via SSL (<tt>Required</tt>).\n" "</p>\n" msgstr "" "<p>일반 동작은 SSL 옵션에 의해 지정됩니다. 호스트는\n" -"SSL을 지원할 수 없거나(<tt>No SSL</tt>), 비 SSL 및 SSL 액세스를 모두 허용하거" -"나(<tt>Allowed</tt>),\n" +"SSL을 지원할 수 없거나(<tt>No SSL</tt>), 비 SSL 및 SSL 액세스를 모두 허용하거나(<tt>Allowed</tt>),\n" " SSL을 통해 암호화된 연결만을 허용합니다(<tt>Required</tt>).\n" " </p>\n" -#. ssl options dialog help 3/4 -#: src/include/http-server/helps.rb:157 +#. ssl options dialog help 3/4 +#: src/include/http-server/helps.rb:157 msgid "" -"<p>Choose an appropriate option of the table and click <b>Edit</b> to change " -"the option.\n" -"To add a new option, click <b>Add</b>. To remove an option, select it and " -"click <b>Delete</b>.</p>" +"<p>Choose an appropriate option of the table and click <b>Edit</b> to change the option.\n" +"To add a new option, click <b>Add</b>. To remove an option, select it and click <b>Delete</b>.</p>" msgstr "" -"<p>옵션을 변경하려면 테이블에서 해당 옵션을 선택한 다음 <b>편집</b>을 클릭합" -"니다.\n" -"새 옵션을 추가하려면 <b>추가</b>를 클릭하고, 옵션을 제거하려면 해당 옵션을 선" -"택한 다음 <b>삭제</b>를 클릭합니다.</p>" +"<p>옵션을 변경하려면 테이블에서 해당 옵션을 선택한 다음 <b>편집</b>을 클릭합니다.\n" +"새 옵션을 추가하려면 <b>추가</b>를 클릭하고, 옵션을 제거하려면 해당 옵션을 선택한 다음 <b>삭제</b>를 클릭합니다.</p>" -#. ssl options dialog help 3/4 (empty in simple mode) -#: src/include/http-server/helps.rb:162 +#. ssl options dialog help 3/4 (empty in simple mode) +#: src/include/http-server/helps.rb:162 msgid "" "<p>The <b>Certificates</b> menu allows \n" "importing server certificates. <b>Import Server Certificate</b> \n" @@ -649,8 +595,8 @@ "<b>일반 인증서 사용</b>은 이 호스트에 대해 발급된\n" "일반 인증서의 사용을 구성합니다.</p>\n" -#. ssl options dialog help 4/4 -#: src/include/http-server/helps.rb:171 +#. ssl options dialog help 4/4 +#: src/include/http-server/helps.rb:171 msgid "" "<p><b>Note:</b> If you enable use of SSL for a host, the <tt>mod_ssl</tt> \n" "module should be loaded by the server.</p>\n" @@ -658,22 +604,20 @@ "<p><b>주의:</b> 호스트에 대해 SSL 사용을 활성화하면 서버에 의해 \n" "<tt>mod_ssl</tt> 모듈이 로드됩니다.</p>\n" -#. new host dialog help 1/3 -#: src/include/http-server/helps.rb:175 +#. new host dialog help 1/3 +#: src/include/http-server/helps.rb:175 msgid "" "<p><b><big>New Host</big></b><br>\n" -"This dialog allows you to enter a basic information about a new virtual host." -"</p>" +"This dialog allows you to enter a basic information about a new virtual host.</p>" msgstr "" "<p><b><big>새 호스트</big></b><br>\n" "이 대화 상자에서는 새 가상 호스트에 대한 기본 정보를 입력할 수 있습니다.</p>" -#. new host dialog help 2/3 -#: src/include/http-server/helps.rb:179 +#. new host dialog help 2/3 +#: src/include/http-server/helps.rb:179 msgid "" "<p><b>Server Identification</b> specifies the content and\n" -"the presentation of the the new virtual host. <b>Server Name</b> is the DNS " -"name returned as a part\n" +"the presentation of the the new virtual host. <b>Server Name</b> is the DNS name returned as a part\n" "of the HTTP headers of the server response. <b>Server Contents Root</b>\n" "is an absolute path to a directory containing all documents provided by\n" "this virtual host. <b>Administrator E-Mail</b> allows setup of an e-mail\n" @@ -686,19 +630,17 @@ " 절대 경로입니다. <b>관리자 전자 메일</b>을 사용하면 이 호스트에 대한\n" " 피드백을 받기 위한 전자 메일 주소를 설정할 수 있습니다.</p>\n" -#. new host dialog help 3/3 -#: src/include/http-server/helps.rb:188 +#. new host dialog help 3/3 +#: src/include/http-server/helps.rb:188 msgid "" "<p><big><b>Server Resolution</b></big><br>\n" "Apache2 must be able to determine which virtual host\n" "settings it should use to create a response for an HTTP request. \n" "There are two basic approaches. If using HTTP headers\n" "from the incoming request, the server looks up the host name specified by\n" -"the HTTP request headers. The other possibility is to determine the virtual " -"host\n" +"the HTTP request headers. The other possibility is to determine the virtual host\n" "by the IP address used by the client when connecting to the server.\n" -"If you plan to configure SSL-based vhost, use <b>Resolution via IP address\n" +"If you plan to configure SSL-based vhost, use <b>Resolution via IP address</b>\n" "Consult the Apache2 manual for further details.</p>\n" msgstr "" "<p><big><b>서버 확인</b></big><br>\n" @@ -706,61 +648,49 @@ "가상 호스트 설정을 확인할 수 있어야 합니다. \n" "두 가지 기본 접근 방법이 있습니다. 들어오는 요청의 HTTP 헤더를\n" "사용하는 경우 서버가 HTTP 요청 헤더에 의해\n" -"지정된 호스트 이름을 조회합니다. 다른 가능성은 클라이언트가 서버에 연결할 " -"때\n" +"지정된 호스트 이름을 조회합니다. 다른 가능성은 클라이언트가 서버에 연결할 때\n" "사용한 IP 주소로 가상 호스트를 확인하는 것입니다.\n" "SSL 기반 vhost를 구성하려는 경우 <b>IP 주소를 통해 확인</b>을 사용하십시오.\n" "자세한 내용은 Apache2 매뉴얼을 참조하십시오.</p>\n" -#. advanced new host dialog 1/5 -#: src/include/http-server/helps.rb:200 +#. advanced new host dialog 1/5 +#: src/include/http-server/helps.rb:200 msgid "" "<p><b><big>Details for New Host</big></b><br>\n" -"This dialog allows you to specify additional information about a new virtual " -"host.</p>" +"This dialog allows you to specify additional information about a new virtual host.</p>" msgstr "" "<p><b><big>새 호스트에 대한 세부 사항</big></b><br>\n" "이 대화 상자에서는 새 가상 호스트에 대한 추가 정보를 지정할 수 있습니다.</p>" -#. advanced new host dialog 2/5 -#: src/include/http-server/helps.rb:204 +#. advanced new host dialog 2/5 +#: src/include/http-server/helps.rb:204 msgid "" "<p>Select <b>Enable CGI Support</b>\n" -"to run CGI scripts in the path in <b>CGI Directory Path</b> using the alias " -"<tt>/cgi-bin/</tt>.</p>" +"to run CGI scripts in the path in <b>CGI Directory Path</b> using the alias <tt>/cgi-bin/</tt>.</p>" msgstr "" "<p><tt>/cgi-bin/</tt> 별칭을 사용하여\n" -"<b>CGI 디렉토리 경로</b>의 경로에서 CGI 스크립트를 실행하려면 <b>CGI 지원 활" -"성화</b>를 선택합니다.</p>" +"<b>CGI 디렉토리 경로</b>의 경로에서 CGI 스크립트를 실행하려면 <b>CGI 지원 활성화</b>를 선택합니다.</p>" -#. advanced new host dialog 3/5 -#: src/include/http-server/helps.rb:208 +#. advanced new host dialog 3/5 +#: src/include/http-server/helps.rb:208 msgid "" "<p>For HTTPS access to this virtual host, select <b>Enable SSL Support</b>.\n" "\n" "Then enter the path for the certificate file in <b>Certificate File\n" "Path</b>.This option is only available for IP-based vhosts.</p>\n" msgstr "" -"<p>이 가상 호스트에 대한 HTTPS 액세스의 경우 <b>SSL 지원 활성화</b>를 선택하" -"십시오.\n" +"<p>이 가상 호스트에 대한 HTTPS 액세스의 경우 <b>SSL 지원 활성화</b>를 선택하십시오.\n" "\n" "그런 다음 <b>인증서 파일 경로</b>에\n" -"인증서 파일의 경로를 입력하십시오. 이 옵션은 IP 기반 vhost에만 사용할 수 있습" -"니다.</p>\n" +"인증서 파일의 경로를 입력하십시오. 이 옵션은 IP 기반 vhost에만 사용할 수 있습니다.</p>\n" -#. advanced new host dialog 4/5 -#: src/include/http-server/helps.rb:215 -msgid "" -"<p>In <b>Directory Index</b>, enter a space-separated list of files that " -"Apache should look for and provide when a URL for a directory (one that ends " -"in <tt>/</tt>) is requested. The first matching file found is provided.</p>" -msgstr "" -"<p><b>디렉토리 색인</b>에서는 Apache가 검색해야 할 파일들을 공백으로 구분하" -"여 입력하고 디렉토리에 대한 URL(<tt>/</tt>로 끝남)이 필요한 시기를 제공합니" -"다. 일치하는 첫 번째 발견된 파일이 제공됩니다.</p>" +#. advanced new host dialog 4/5 +#: src/include/http-server/helps.rb:215 +msgid "<p>In <b>Directory Index</b>, enter a space-separated list of files that Apache should look for and provide when a URL for a directory (one that ends in <tt>/</tt>) is requested. The first matching file found is provided.</p>" +msgstr "<p><b>디렉토리 색인</b>에서는 Apache가 검색해야 할 파일들을 공백으로 구분하여 입력하고 디렉토리에 대한 URL(<tt>/</tt>로 끝남)이 필요한 시기를 제공합니다. 일치하는 첫 번째 발견된 파일이 제공됩니다.</p>" -#. advanced new host dialog 5/5 -#: src/include/http-server/helps.rb:219 +#. advanced new host dialog 5/5 +#: src/include/http-server/helps.rb:219 msgid "" "<p><b>Public HTML</b>\n" "\n" @@ -768,140 +698,132 @@ msgstr "" "<p><b>공용 HTML</b>은\n" "\n" -" 모든 사용자가 <tt>.public_html</tt> 디렉토리에 액세스할 수 있도록 합니다." +" 모든 사용자가 <tt>.public_html</tt> 디렉토리에 액세스할 수 있도록 합니다.</p>" -#. Convert a Listen string to an item for table. Splits by the colon. -#. -#. @param [String] arg the Listen string -#. @param [Fixnum] id the id of this item -#. @return [Yast::Term] term for the table -#. translators: all network addresses Listen type -#. translators: all network addresses Listen type -#. translators: all network addresses Listen type -#. translators: Listen type for all addresses; -#. translators: all network addresses Listen type -#. translators: all network addresses Listen type -#: src/include/http-server/routines.rb:59 -#: src/modules/HttpServerWidgets.rb:2396 -#: src/modules/HttpServerWidgets.rb:2398 -#: src/modules/HttpServerWidgets.rb:2412 -#: src/modules/HttpServerWidgets.rb:2416 -#: src/modules/HttpServerWidgets.rb:3296 -#: src/modules/HttpServerWidgets.rb:3301 +#. Convert a Listen string to an item for table. Splits by the colon. +#. +#. @param [String] arg the Listen string +#. @param [Fixnum] id the id of this item +#. @return [Yast::Term] term for the table +#. translators: all network addresses Listen type +#. translators: all network addresses Listen type +#. translators: all network addresses Listen type +#. translators: Listen type for all addresses; +#. translators: all network addresses Listen type +#. translators: all network addresses Listen type +#: src/include/http-server/routines.rb:59 +#: src/modules/HttpServerWidgets.rb:2396 src/modules/HttpServerWidgets.rb:2398 +#: src/modules/HttpServerWidgets.rb:2412 src/modules/HttpServerWidgets.rb:2416 +#: src/modules/HttpServerWidgets.rb:3296 src/modules/HttpServerWidgets.rb:3301 msgid "All Addresses" msgstr "모든 주소" -#. Sequention used for determining on which ip adresses and port apache2 will listen and if firewall is enebled -#. whether to open firewall on this port. -#. @return [Symbol] (`back, `abort, `next) -#: src/include/http-server/wizard-dialog.rb:24 +#. Sequention used for determining on which ip adresses and port apache2 will listen and if firewall is enebled +#. whether to open firewall on this port. +#. @return [Symbol] (`back, `abort, `next) +#: src/include/http-server/wizard-dialog.rb:24 msgid "HTTP Server Wizard (1/5)--Network Device Selection" msgstr "HTTP 서버 마법사(1/5)--네트워크 장치 선택" -#: src/include/http-server/wizard-dialog.rb:41 +#: src/include/http-server/wizard-dialog.rb:41 msgid "Network Device Selection" msgstr "네트워크 장치 선택" -#. Sequence to choose some script language modules -#. @return [Symbol] (`back, `abort, `next) -#: src/include/http-server/wizard-dialog.rb:125 +#. Sequence to choose some script language modules +#. @return [Symbol] (`back, `abort, `next) +#: src/include/http-server/wizard-dialog.rb:125 msgid "HTTP Server Wizard (2/5)--Modules" msgstr "HTTP 서버 마법사(2/5)--모듈" -#: src/include/http-server/wizard-dialog.rb:130 +#: src/include/http-server/wizard-dialog.rb:130 msgid "Modules" msgstr "모듈" -#: src/include/http-server/wizard-dialog.rb:168 +#: src/include/http-server/wizard-dialog.rb:168 msgid "0" msgstr "0" -#. Sequence to configure default host parameters -#. @return [Symbol] (`back, `abort, `next) -#: src/include/http-server/wizard-dialog.rb:186 +#. Sequence to configure default host parameters +#. @return [Symbol] (`back, `abort, `next) +#: src/include/http-server/wizard-dialog.rb:186 msgid "HTTP Server Wizard (3/5)--Default Host" msgstr "HTTP 서버 마법사(3/5)--기본 호스트" -#. Sequence to cunfigure virtual hosts (add, remove, edit) and to change default host status -#. @return [Symbol] (`back, `abort, `next) -#: src/include/http-server/wizard-dialog.rb:260 +#. Sequence to cunfigure virtual hosts (add, remove, edit) and to change default host status +#. @return [Symbol] (`back, `abort, `next) +#: src/include/http-server/wizard-dialog.rb:260 msgid "HTTP Server Wizard (4/5)--Virtual Hosts" msgstr "HTTP 서버 마법사(4/5)--가상 호스트" -#. Sequence to configure whether apache2 starts on boot or not (manually). Here is possible -#. save all settings and exit or start expert configuration. -#. @return [Symbol] (`back, `abort, `next) -#: src/include/http-server/wizard-dialog.rb:291 +#. Sequence to configure whether apache2 starts on boot or not (manually). Here is possible +#. save all settings and exit or start expert configuration. +#. @return [Symbol] (`back, `abort, `next) +#: src/include/http-server/wizard-dialog.rb:291 msgid "HTTP Server Wizard (5/5)--Summary" msgstr "HTTP 서버 마법사(5/5)--요약" -#. translators: initialization dialog message -#: src/include/http-server/wizards.rb:202 +#. translators: initialization dialog message +#: src/include/http-server/wizards.rb:202 msgid "Initializing ..." msgstr "초기화 중입니다....." -#. HttpServer read dialog caption -#: src/modules/HttpServer.rb:133 +#. HttpServer read dialog caption +#: src/modules/HttpServer.rb:133 msgid "Initializing HTTP Server Configuration" msgstr "HTTP서버 설정 초기화" -#. translators: progress stage -#: src/modules/HttpServer.rb:144 +#. translators: progress stage +#: src/modules/HttpServer.rb:144 msgid "Check the environment" msgstr "환경 검사." -#. translators: progress stage -#: src/modules/HttpServer.rb:146 +#. translators: progress stage +#: src/modules/HttpServer.rb:146 msgid "Read Apache2 configuration" msgstr "Apache2 설정을 읽습니다." -#. translators: progress stage -#: src/modules/HttpServer.rb:148 +#. translators: progress stage +#: src/modules/HttpServer.rb:148 msgid "Read network configuration" msgstr "네트워크 구성 읽기" -#. translators: progress step -#: src/modules/HttpServer.rb:152 +#. translators: progress step +#: src/modules/HttpServer.rb:152 msgid "Checking the environment..." msgstr "환경 검사중..." -#. translators: progress step -#: src/modules/HttpServer.rb:154 +#. translators: progress step +#: src/modules/HttpServer.rb:154 msgid "Reading Apache2 configuration..." msgstr "Apache2설정을 불러오는 중입니다..." -#. translators: progress step -#: src/modules/HttpServer.rb:156 +#. translators: progress step +#: src/modules/HttpServer.rb:156 msgid "Reading network configuration..." msgstr "네트워크 설정 불러오는 중..." -#. translators: progress finished -#. on(); -#. translators: progress step -#. translators: progress finished -#. translators: progress finished -#: src/modules/HttpServer.rb:158 src/modules/HttpServer.rb:391 -#: src/modules/HttpServer.rb:432 src/modules/HttpServer.rb:514 +#. translators: progress finished +#. on(); +#. translators: progress step +#. translators: progress finished +#. translators: progress finished +#: src/modules/HttpServer.rb:158 src/modules/HttpServer.rb:391 +#: src/modules/HttpServer.rb:432 src/modules/HttpServer.rb:514 msgid "Finished" msgstr "완료됨" -#. notification about package needed 1/2 -#: src/modules/HttpServer.rb:187 -msgid "" -"<p>To configure the HTTP server, the <b>%1</b> packages must be installed." -msgstr "" -"<p> HTTP서버를 설정하기 위해서는, <b>%1</b> 패키지가 먼저 설치되어야 합니다." -"</p>" +#. notification about package needed 1/2 +#: src/modules/HttpServer.rb:187 +msgid "<p>To configure the HTTP server, the <b>%1</b> packages must be installed.</p>" +msgstr "<p> HTTP서버를 설정하기 위해서는, <b>%1</b> 패키지가 먼저 설치되어야 합니다.</p>" -#. notification about package needed 2/2 -#: src/modules/HttpServer.rb:191 +#. notification about package needed 2/2 +#: src/modules/HttpServer.rb:191 msgid "<p>Do you want to install it now?</p>" msgstr "<p>지금 이것을 설치 하기 원하십니까?</p>" -#. translators: error popup before aborting the module -#: src/modules/HttpServer.rb:197 +#. translators: error popup before aborting the module +#: src/modules/HttpServer.rb:197 msgid "" "The package %1 is not available.\n" "\n" @@ -915,54 +837,54 @@ " \n" " 구성을 계속할 수 없습니다." -#. translators: error message, %1 is the file name of expected configuration file -#. translators: warning message, %1 is the file name of expected configuration file -#: src/modules/HttpServer.rb:225 src/modules/HttpServer.rb:249 +#. translators: error message, %1 is the file name of expected configuration file +#. translators: warning message, %1 is the file name of expected configuration file +#: src/modules/HttpServer.rb:225 src/modules/HttpServer.rb:249 msgid "The configuration file '%1' does not exist." msgstr "설정파일 '%1'이 존재하지 않습니다." -#. off(); -#: src/modules/HttpServer.rb:281 +#. off(); +#: src/modules/HttpServer.rb:281 msgid "There is no DNS server running on this machine." msgstr "이 컴퓨터에는 실행 중인 DNS 서버가 없습니다." -#. HttpServer read dialog caption -#: src/modules/HttpServer.rb:405 +#. HttpServer read dialog caption +#: src/modules/HttpServer.rb:405 msgid "Saving HTTP Server Configuration" msgstr "HTTP서버 구성을 저장" -#. translators: progress stage 1/3 -#: src/modules/HttpServer.rb:416 +#. translators: progress stage 1/3 +#: src/modules/HttpServer.rb:416 msgid "Write the Apache2 settings" msgstr "Apache2 설정을 기록합니다." -#. translators: progress stage 2/3 -#: src/modules/HttpServer.rb:419 +#. translators: progress stage 2/3 +#: src/modules/HttpServer.rb:419 msgid "Enable Apache2 service" msgstr "Apache2 서비스 활성화(&E)" -#. translators: progress stage 3/3 -#: src/modules/HttpServer.rb:421 +#. translators: progress stage 3/3 +#: src/modules/HttpServer.rb:421 msgid "Disable Apache2 service" msgstr "Apache2 서비스 비활성화(&D)" -#. translators: progress step 1/3 -#: src/modules/HttpServer.rb:425 +#. translators: progress step 1/3 +#: src/modules/HttpServer.rb:425 msgid "Writing the settings..." msgstr "설정을 기록하는 중..." -#. translators: progress step 2/3 -#: src/modules/HttpServer.rb:428 +#. translators: progress step 2/3 +#: src/modules/HttpServer.rb:428 msgid "Enabling Apache2 service..." msgstr "Apache2 서비스를 활성화하고있습니다..." -#. translators: progress step 3/3 -#: src/modules/HttpServer.rb:430 +#. translators: progress step 3/3 +#: src/modules/HttpServer.rb:430 msgid "Disabling Apache2 service..." msgstr "Apache2 서비스를 비활성화하고있습니다..." -#. install required RPMs for modules -#: src/modules/HttpServer.rb:444 +#. install required RPMs for modules +#: src/modules/HttpServer.rb:444 msgid "" "The enabled modules require\n" "installation of some of these additional packages:\n" @@ -974,18 +896,18 @@ "%1\n" "지금 그들을 설치하시겠습니까?\n" -#. translators: warning in autoyast loading the configuration description. -#: src/modules/HttpServer.rb:554 +#. translators: warning in autoyast loading the configuration description. +#: src/modules/HttpServer.rb:554 msgid "Module description does not have a name specified, ignoring." msgstr "모듈 설명에 이름이 지정되어 있지 않습니다. 무시합니다." -#. translators: warning in autoyast loading the configuration description. -#: src/modules/HttpServer.rb:566 +#. translators: warning in autoyast loading the configuration description. +#: src/modules/HttpServer.rb:566 msgid "Unknown change of a module for autoinstallation: %1" msgstr "자동 설치를 위한 모듈에 알 수 없는 변경 사항이 발생해ㅆ습니다. %1" -#. translators: warning in autoyast loading the configuration description. -#: src/modules/HttpServer.rb:585 +#. translators: warning in autoyast loading the configuration description. +#: src/modules/HttpServer.rb:585 msgid "" "Default value for module %1 does not match.\n" "This can cause inconsistent module configuration." @@ -993,251 +915,251 @@ "%1 모듈의 기본값이 일치하지 않습니다.\n" "이렇게 되면 모듈 구성이 일치하지 않을 수 있습니다." -#. translators: error in autoyast loading the configuration description. -#: src/modules/HttpServer.rb:600 +#. translators: error in autoyast loading the configuration description. +#: src/modules/HttpServer.rb:600 msgid "Listen statement without port found." msgstr "Listen 문에 포트를 지정하지 않았습니다." -#. "Listen on " information (interfaces, port) -#: src/modules/HttpServer.rb:734 +#. "Listen on " information (interfaces, port) +#: src/modules/HttpServer.rb:734 msgid "<h3>Listen On</h3>" msgstr "<h3>수신 대기</h3>" -#. "Default host" information -#: src/modules/HttpServer.rb:754 +#. "Default host" information +#: src/modules/HttpServer.rb:754 msgid "<h3>Default Host</h3>" msgstr "<h3>기본 호스트</h3>" -#. translators: assiciation server name with document root -#. translators: assiciation server name with document root -#: src/modules/HttpServer.rb:773 src/modules/HttpServer.rb:803 +#. translators: assiciation server name with document root +#. translators: assiciation server name with document root +#: src/modules/HttpServer.rb:773 src/modules/HttpServer.rb:803 msgid " in " msgstr " 위치 " -#. translators: whether SSL is enabled or disabled -#. translators: whether SSL is enabled or disable -#: src/modules/HttpServer.rb:778 src/modules/HttpServer.rb:807 +#. translators: whether SSL is enabled or disabled +#. translators: whether SSL is enabled or disable +#: src/modules/HttpServer.rb:778 src/modules/HttpServer.rb:807 msgid "enabled" msgstr "활성화" -#: src/modules/HttpServer.rb:778 src/modules/HttpServer.rb:807 +#: src/modules/HttpServer.rb:778 src/modules/HttpServer.rb:807 msgid "disabled" msgstr "비활성화" -#. the same information as in default host but for other virtual hosts -#: src/modules/HttpServer.rb:782 +#. the same information as in default host but for other virtual hosts +#: src/modules/HttpServer.rb:782 msgid "<h3>Virtual Hosts</h3>" msgstr "<h3>가상 호스트</h3>" -#. menu button label -#: src/modules/HttpServerWidgets.rb:63 +#. menu button label +#: src/modules/HttpServerWidgets.rb:63 msgid "&Log Files" msgstr "로그 파일(&L)" -#. menu button item -#: src/modules/HttpServerWidgets.rb:66 +#. menu button item +#: src/modules/HttpServerWidgets.rb:66 msgid "Show &Access Log" msgstr "엑세스 로그를 보여줍니다.(&A)" -#. menu button item -#: src/modules/HttpServerWidgets.rb:68 +#. menu button item +#: src/modules/HttpServerWidgets.rb:68 msgid "Show &Error Log" msgstr "에러 로그를 보여줍니다.(&E)" -#. table cell description -#. table cell description -#: src/modules/HttpServerWidgets.rb:121 src/modules/HttpServerWidgets.rb:127 +#. table cell description +#. table cell description +#: src/modules/HttpServerWidgets.rb:121 src/modules/HttpServerWidgets.rb:127 msgid "Server Name" msgstr "서버 이름" -#. table cell description -#: src/modules/HttpServerWidgets.rb:134 +#. table cell description +#: src/modules/HttpServerWidgets.rb:134 msgid "Document Root" msgstr "문서 루트" -#. table cell description -#: src/modules/HttpServerWidgets.rb:143 +#. table cell description +#: src/modules/HttpServerWidgets.rb:143 msgid "Server Administrator E-Mail" msgstr "서버 관리자 메일" -#. table cell description -#. translators: frame title for method of incoming request resolution -#: src/modules/HttpServerWidgets.rb:154 src/modules/HttpServerWidgets.rb:664 +#. table cell description +#. translators: frame title for method of incoming request resolution +#: src/modules/HttpServerWidgets.rb:154 src/modules/HttpServerWidgets.rb:664 msgid "Server Resolution" msgstr "서버 확인" -#. translators: radio button for name-based virtual hosts -#. translators: radio button for name-based virtual hosts -#: src/modules/HttpServerWidgets.rb:162 src/modules/HttpServerWidgets.rb:679 +#. translators: radio button for name-based virtual hosts +#. translators: radio button for name-based virtual hosts +#: src/modules/HttpServerWidgets.rb:162 src/modules/HttpServerWidgets.rb:679 msgid "Determine Request Server by HTTP &Headers" msgstr "HTTP 헤더로 요청 서버 결정(&H)" -#. translators: radio button for IP-based virtual hosts -#. translators: radio button for IP-based virtual hosts -#: src/modules/HttpServerWidgets.rb:164 src/modules/HttpServerWidgets.rb:688 +#. translators: radio button for IP-based virtual hosts +#. translators: radio button for IP-based virtual hosts +#: src/modules/HttpServerWidgets.rb:164 src/modules/HttpServerWidgets.rb:688 msgid "Determine Request Server by Server IP &Address" msgstr "서버 IP 주소로 요청 서버 결정(&A)" -#. table cell description -#: src/modules/HttpServerWidgets.rb:171 +#. table cell description +#: src/modules/HttpServerWidgets.rb:171 msgid "IP Address" msgstr "IP 주소" -#. translator: server enable/disable radio button group -#: src/modules/HttpServerWidgets.rb:350 +#. translator: server enable/disable radio button group +#: src/modules/HttpServerWidgets.rb:350 msgid "HTTP &Service" msgstr "HTTP 서비스들(&S)" -#. translators: radio button group label -#: src/modules/HttpServerWidgets.rb:387 +#. translators: radio button group label +#: src/modules/HttpServerWidgets.rb:387 msgid "Listen on Ports:" msgstr "Listen중인 포트" -#. table header -#: src/modules/HttpServerWidgets.rb:392 +#. table header +#: src/modules/HttpServerWidgets.rb:392 msgid "Network Address" msgstr "네트워크 주소" -#. table header -#: src/modules/HttpServerWidgets.rb:394 +#. table header +#: src/modules/HttpServerWidgets.rb:394 msgid "Port" msgstr "포트" -#. table header: module name -#: src/modules/HttpServerWidgets.rb:422 +#. table header: module name +#: src/modules/HttpServerWidgets.rb:422 msgid "Name" msgstr "이름" -#. table header: module status -#: src/modules/HttpServerWidgets.rb:424 +#. table header: module status +#: src/modules/HttpServerWidgets.rb:424 msgid "Status" msgstr "상태" -#. table header: module description -#: src/modules/HttpServerWidgets.rb:426 +#. table header: module description +#: src/modules/HttpServerWidgets.rb:426 msgid "Description" msgstr "설명" -#. translators: toggle button label -#: src/modules/HttpServerWidgets.rb:434 +#. translators: toggle button label +#: src/modules/HttpServerWidgets.rb:434 msgid "&Toggle Status" msgstr "상태 토글(&T)" -#. translators: add user-defined module button label -#: src/modules/HttpServerWidgets.rb:440 +#. translators: add user-defined module button label +#: src/modules/HttpServerWidgets.rb:440 msgid "&Add Module" msgstr "모듈 추가(&A)" -#: src/modules/HttpServerWidgets.rb:552 +#: src/modules/HttpServerWidgets.rb:552 msgid "Directory" msgstr "디렉토리" -#. translators: text entry -#: src/modules/HttpServerWidgets.rb:558 +#. translators: text entry +#: src/modules/HttpServerWidgets.rb:558 msgid "&Port:" msgstr "포트(&P)" -#. translators: multi selection box -#. translators: multi selection box -#: src/modules/HttpServerWidgets.rb:572 src/modules/HttpServerWidgets.rb:3475 +#. translators: multi selection box +#. translators: multi selection box +#: src/modules/HttpServerWidgets.rb:572 src/modules/HttpServerWidgets.rb:3475 msgid "&Listen on Interfaces" msgstr "수신 대기 인터페이스(&L)" -#. translators: radiobutton - to start Apache2 service automatically -#: src/modules/HttpServerWidgets.rb:596 +#. translators: radiobutton - to start Apache2 service automatically +#: src/modules/HttpServerWidgets.rb:596 msgid "Start Apache2 Server When Booting" msgstr "부팅 시 Apache2 서버 시작" -#. translators: radiobutton - to don't start Apache2 service -#: src/modules/HttpServerWidgets.rb:600 +#. translators: radiobutton - to don't start Apache2 service +#: src/modules/HttpServerWidgets.rb:600 msgid "Start Apache2 Server Manually" msgstr "수동으로 Apache2 서버 시작" -#. translators: button to enter expert configuration -#: src/modules/HttpServerWidgets.rb:608 +#. translators: button to enter expert configuration +#: src/modules/HttpServerWidgets.rb:608 msgid "&HTTP Server Expert Configuration..." msgstr "HTTP 서버 고급 구성(&H)..." -#. translators: frame title for new hsot identification details -#: src/modules/HttpServerWidgets.rb:631 +#. translators: frame title for new hsot identification details +#: src/modules/HttpServerWidgets.rb:631 msgid "Server Identification" msgstr "서버 ID" -#. translators: textentry, new host server name -#. translators: textentry to set the host name -#: src/modules/HttpServerWidgets.rb:634 src/modules/HttpServerWidgets.rb:1180 +#. translators: textentry, new host server name +#. translators: textentry to set the host name +#: src/modules/HttpServerWidgets.rb:634 src/modules/HttpServerWidgets.rb:1180 msgid "Server &Name:" msgstr "서버 이름" -#. translators: textentry, document root for the new host -#: src/modules/HttpServerWidgets.rb:637 +#. translators: textentry, document root for the new host +#: src/modules/HttpServerWidgets.rb:637 msgid "Server &Contents Root:" msgstr "서버 컨텐트 루트(&C):" -#. translators: textentry, administrator's e-mail for the new host -#: src/modules/HttpServerWidgets.rb:641 +#. translators: textentry, administrator's e-mail for the new host +#: src/modules/HttpServerWidgets.rb:641 msgid "&Administrator E-Mail:" msgstr "관리자 전자 메일(&A):" -#. translators: IP address for the new host -#: src/modules/HttpServerWidgets.rb:668 +#. translators: IP address for the new host +#: src/modules/HttpServerWidgets.rb:668 msgid "VirtualHost" msgstr "VirtualHost" -#: src/modules/HttpServerWidgets.rb:669 +#: src/modules/HttpServerWidgets.rb:669 msgid "Change VirtualHost ID" msgstr "VirtualHost ID 변경" -#. translators: frame title for virtual host identification details -#: src/modules/HttpServerWidgets.rb:716 +#. translators: frame title for virtual host identification details +#: src/modules/HttpServerWidgets.rb:716 msgid "CGI Options" msgstr "CGI 옵션" -#: src/modules/HttpServerWidgets.rb:722 +#: src/modules/HttpServerWidgets.rb:722 msgid "Enable &CGI for This Virtual Host" msgstr "이 가상 호스트에 대해 CGI 활성화(&C)" -#. translators: textentry, certificate file path -#: src/modules/HttpServerWidgets.rb:727 +#. translators: textentry, certificate file path +#: src/modules/HttpServerWidgets.rb:727 msgid "CGI &Directory Path" msgstr "CGI 디렉토리 경로(&D)" -#: src/modules/HttpServerWidgets.rb:737 +#: src/modules/HttpServerWidgets.rb:737 msgid "SSL Support" msgstr "SSL 지원" -#: src/modules/HttpServerWidgets.rb:743 +#: src/modules/HttpServerWidgets.rb:743 msgid "Enable &SSL Support for This Virtual Host" msgstr "이 가상 호스트에 대해 SSL 지원 활성화(&S)" -#. translators: textentry, certificate file path -#: src/modules/HttpServerWidgets.rb:750 +#. translators: textentry, certificate file path +#: src/modules/HttpServerWidgets.rb:750 msgid "&Certificate File Path" msgstr "인증서 파일 경로(&C)" -#: src/modules/HttpServerWidgets.rb:755 +#: src/modules/HttpServerWidgets.rb:755 msgid "&Certificate Key File Path" msgstr "인증서 키 파일 경로(&C)" -#: src/modules/HttpServerWidgets.rb:763 +#: src/modules/HttpServerWidgets.rb:763 msgid "Directory Options" msgstr "디렉토리 옵션" -#: src/modules/HttpServerWidgets.rb:764 +#: src/modules/HttpServerWidgets.rb:764 msgid "&Directory Index" msgstr "디렉토리 색인(&D)" -#: src/modules/HttpServerWidgets.rb:768 +#: src/modules/HttpServerWidgets.rb:768 msgid "Public HTML" msgstr "공용 HTML" -#: src/modules/HttpServerWidgets.rb:769 +#: src/modules/HttpServerWidgets.rb:769 msgid "Enable &Public HTML" msgstr "공용 HTML 활성화(&P)" -#. these are for future use: -#. error message - the entered ip address is not found -#: src/modules/HttpServerWidgets.rb:803 +#. these are for future use: +#. error message - the entered ip address is not found +#: src/modules/HttpServerWidgets.rb:803 msgid "" "The IP address is not configured\n" "on this machine." @@ -1245,61 +1167,59 @@ "이 컴퓨터에 IP 주소가 구성되어 있지\n" "않습니다." -#. translators: popup error message when validate server ip -#: src/modules/HttpServerWidgets.rb:923 +#. translators: popup error message when validate server ip +#: src/modules/HttpServerWidgets.rb:923 msgid "Invalid IP address." msgstr "IP 주소가 잘못되었습니다." -#. translators: popup error message when validate server -#: src/modules/HttpServerWidgets.rb:943 +#. translators: popup error message when validate server +#: src/modules/HttpServerWidgets.rb:943 msgid "The default host cannot be configured with SSL support." msgstr "기본 호스트는 SSL 지원과 함께 구성할 수 없습니다." -#. for apache2.2 ServerName is not forced (if not - hostname will be used) -#: src/modules/HttpServerWidgets.rb:966 +#. for apache2.2 ServerName is not forced (if not - hostname will be used) +#: src/modules/HttpServerWidgets.rb:966 msgid "When no Server name is defined, hostname will be used instead." msgstr "서버 이름이 정의되어 있지 않으면 호스트 이름이 대신 사용됩니다." -#. translators: popup error message when validate server -#: src/modules/HttpServerWidgets.rb:971 +#. translators: popup error message when validate server +#: src/modules/HttpServerWidgets.rb:971 msgid "Server name cannot be empty." msgstr "서버 이름은 비워 둘 수 없습니다." -#. error message - the entered server name is already configured -#. in another virtual host -#: src/modules/HttpServerWidgets.rb:991 +#. error message - the entered server name is already configured +#. in another virtual host +#: src/modules/HttpServerWidgets.rb:991 msgid "The server name entered is already configured on another virtual host." msgstr "입력한 서버 이름은 다른 가상 호스트에 이미 구성되어 있습니다." -#. error message - the entered ip address is already -#. configured for another virtual host -#: src/modules/HttpServerWidgets.rb:1010 +#. error message - the entered ip address is already +#. configured for another virtual host +#: src/modules/HttpServerWidgets.rb:1010 msgid "The IP address is already configured on another virtual host" msgstr "해당 IP 주소는 다른 가상 호스트에 이미 구성되어 있습니다." -#. translators: popup error message when validate ServerAdmin -#: src/modules/HttpServerWidgets.rb:1026 +#. translators: popup error message when validate ServerAdmin +#: src/modules/HttpServerWidgets.rb:1026 msgid "Administrator E-Mail is invalid." msgstr "관리자 전자 메일이 잘못되었습니다." -#. menubutton entry, try to keep short -#. menubutton entry, try to keep short -#: src/modules/HttpServerWidgets.rb:1073 -#: src/modules/HttpServerWidgets.rb:1117 +#. menubutton entry, try to keep short +#. menubutton entry, try to keep short +#: src/modules/HttpServerWidgets.rb:1073 src/modules/HttpServerWidgets.rb:1117 msgid "&Reload HTTP Server" msgstr "HTTP 서버 다시 읽기(&R)" -#. menubutton entry, try to keep short -#. menubutton entry, try to keep short -#: src/modules/HttpServerWidgets.rb:1078 -#: src/modules/HttpServerWidgets.rb:1122 +#. menubutton entry, try to keep short +#. menubutton entry, try to keep short +#: src/modules/HttpServerWidgets.rb:1078 src/modules/HttpServerWidgets.rb:1122 msgid "Save Settings and Re&start HTTP Server" msgstr "설정 저장 및 HTTP 서버 재시작(&S)" -#. translators: popup description on changing the default host -#. the old default host is changed to a virtual one, but it may -#. miss some needed information. the popup asks to set them. -#: src/modules/HttpServerWidgets.rb:1166 +#. translators: popup description on changing the default host +#. the old default host is changed to a virtual one, but it may +#. miss some needed information. the popup asks to set them. +#: src/modules/HttpServerWidgets.rb:1166 msgid "" "The current default host will be replaced by \n" "the new host and will become a virtual host.\n" @@ -1323,49 +1243,49 @@ "기본 호스트를 변경하지 않으려면\n" "취소를 클릭합니다.\n" -#. translators: textentry to set the host IP address -#: src/modules/HttpServerWidgets.rb:1183 +#. translators: textentry to set the host IP address +#: src/modules/HttpServerWidgets.rb:1183 msgid "Server &IP Address:" msgstr "서버 IP 주소(&I):" -#. message popup -#: src/modules/HttpServerWidgets.rb:1246 +#. message popup +#: src/modules/HttpServerWidgets.rb:1246 msgid "Delete selected host?" msgstr "선택한 호스트를 삭제하시겠습니까?" -#. menu button label -#: src/modules/HttpServerWidgets.rb:1380 +#. menu button label +#: src/modules/HttpServerWidgets.rb:1380 msgid "Set as De&fault" msgstr "기본값으로 설정(&F)" -#. options = add(options, $["VALUE":newlist]); -#: src/modules/HttpServerWidgets.rb:1639 +#. options = add(options, $["VALUE":newlist]); +#: src/modules/HttpServerWidgets.rb:1639 msgid "Choose Document Root" msgstr "문서 루트 선택" -#. translators: error popup -#: src/modules/HttpServerWidgets.rb:1662 +#. translators: error popup +#: src/modules/HttpServerWidgets.rb:1662 msgid "Administrator E-Mail cannot be empty." msgstr "관리자 전자 메일은 비워 둘 수 없습니다." -#: src/modules/HttpServerWidgets.rb:1709 +#: src/modules/HttpServerWidgets.rb:1709 msgid "All addresses (*)" msgstr "모든 주소(*)" -#: src/modules/HttpServerWidgets.rb:1714 +#: src/modules/HttpServerWidgets.rb:1714 msgid "IP Addresses" msgstr "IP 주소" -#: src/modules/HttpServerWidgets.rb:1716 +#: src/modules/HttpServerWidgets.rb:1716 msgid "ServerName" msgstr "서버 이름" -#: src/modules/HttpServerWidgets.rb:1803 +#: src/modules/HttpServerWidgets.rb:1803 msgid "Name for VirtualHost ID cannot be empty." msgstr "가상 호스트 ID의 이름은 비워둘 수 없습니다." -#. regexp matches '*' and '*:80' -#: src/modules/HttpServerWidgets.rb:1818 +#. regexp matches '*' and '*:80' +#: src/modules/HttpServerWidgets.rb:1818 msgid "" "To use name-based virtual hosting,\n" "you must designate the IP address on the server\n" @@ -1377,63 +1297,61 @@ "지정해야 합니다.\n" " * 모든 주소 및 *:포트를 사용할 수 있습니다." -#: src/modules/HttpServerWidgets.rb:1854 +#: src/modules/HttpServerWidgets.rb:1854 msgid "Master Zone %1" msgstr "마스터 영역 %1" -#: src/modules/HttpServerWidgets.rb:1872 +#: src/modules/HttpServerWidgets.rb:1872 msgid "Record %1 already exists in zone %2." msgstr "%1 레코드는 %2 영역에 이미 존재합니다." -#: src/modules/HttpServerWidgets.rb:1880 -#: src/modules/HttpServerWidgets.rb:1925 +#: src/modules/HttpServerWidgets.rb:1880 src/modules/HttpServerWidgets.rb:1925 msgid "DNS Settings" msgstr "DNS 설정" -#: src/modules/HttpServerWidgets.rb:1884 +#: src/modules/HttpServerWidgets.rb:1884 msgid "Add to Zone" msgstr "영역에 추가" -#: src/modules/HttpServerWidgets.rb:1929 +#: src/modules/HttpServerWidgets.rb:1929 msgid "Zone Name" msgstr "영역 이름" -#: src/modules/HttpServerWidgets.rb:1930 +#: src/modules/HttpServerWidgets.rb:1930 msgid "Create New Zone" msgstr "새 영역 작성" -#. disable using SSL for name-based virtual host -#: src/modules/HttpServerWidgets.rb:2021 +#. disable using SSL for name-based virtual host +#: src/modules/HttpServerWidgets.rb:2021 msgid "CGI Directory" msgstr "CGI 디렉토리" -#: src/modules/HttpServerWidgets.rb:2028 +#: src/modules/HttpServerWidgets.rb:2028 msgid "Choose Certificate File" msgstr "인증서 파일 선택" -#. translators: error popup -#: src/modules/HttpServerWidgets.rb:2039 +#. translators: error popup +#: src/modules/HttpServerWidgets.rb:2039 msgid "Enter the certificate file." msgstr "인증서 파일을 입력하십시오." -#: src/modules/HttpServerWidgets.rb:2045 +#: src/modules/HttpServerWidgets.rb:2045 msgid "Choose Certificate Key File" msgstr "인증서 키 파일 선택" -#. translators: error popup -#: src/modules/HttpServerWidgets.rb:2057 +#. translators: error popup +#: src/modules/HttpServerWidgets.rb:2057 msgid "Enter the key file." msgstr "키 파일을 입력하십시오." -#. translators: dialog to set *.pem file with certificate -#. translators: dialog to set *.pem file with certificate -#: src/modules/HttpServerWidgets.rb:2193 -#: src/modules/HttpServerWidgets.rb:2231 +#. translators: dialog to set *.pem file with certificate +#. translators: dialog to set *.pem file with certificate +#: src/modules/HttpServerWidgets.rb:2193 src/modules/HttpServerWidgets.rb:2231 msgid "Select Certificate" msgstr "인증서 선택" -#. translators: error message un failed certificate import -#: src/modules/HttpServerWidgets.rb:2223 +#. translators: error message un failed certificate import +#: src/modules/HttpServerWidgets.rb:2223 msgid "" "Cannot import certificate\n" "%1" @@ -1441,63 +1359,62 @@ "인증서를 임포트할 수 없습니다.\n" "%1" -#. translators: combo box label for list of configured IPs -#: src/modules/HttpServerWidgets.rb:2430 +#. translators: combo box label for list of configured IPs +#: src/modules/HttpServerWidgets.rb:2430 msgid "Network &Address:" msgstr "네트워크 주소(&A):" -#. translators: error message when validating Listen statement -#. translators: popup error -#: src/modules/HttpServerWidgets.rb:2475 -#: src/modules/HttpServerWidgets.rb:3443 +#. translators: error message when validating Listen statement +#. translators: popup error +#: src/modules/HttpServerWidgets.rb:2475 src/modules/HttpServerWidgets.rb:3443 msgid "Invalid port number." msgstr "옳바르지 않는 포트번호." -#. translators: table entry text for name-based vhosts -#: src/modules/HttpServerWidgets.rb:2941 +#. translators: table entry text for name-based vhosts +#: src/modules/HttpServerWidgets.rb:2941 msgid "Resolution via HTTP Headers" msgstr "HTTP 헤더를 통해 확인" -#. translators: table entry text for IP-based vhosts -#: src/modules/HttpServerWidgets.rb:2944 +#. translators: table entry text for IP-based vhosts +#: src/modules/HttpServerWidgets.rb:2944 msgid "Resolution via IP Address Used" msgstr "사용된 IP 주소를 통해 확인" -#: src/modules/HttpServerWidgets.rb:3108 +#: src/modules/HttpServerWidgets.rb:3108 msgid "Modules dependency problem" msgstr "모듈 종속성 문제" -#: src/modules/HttpServerWidgets.rb:3110 +#: src/modules/HttpServerWidgets.rb:3110 msgid "requires" msgstr "필수" -#: src/modules/HttpServerWidgets.rb:3112 +#: src/modules/HttpServerWidgets.rb:3112 msgid "Enable required module or disable first one." msgstr "필수 모듈을 활성화하거나 첫 번째 모듈을 비활성화하십시오." -#. translators: combo box for selsect module from installed unknown modules -#: src/modules/HttpServerWidgets.rb:3222 +#. translators: combo box for selsect module from installed unknown modules +#: src/modules/HttpServerWidgets.rb:3222 msgid "New Module &Name:" msgstr "새로운 모듈 이름(&N):" -#. translators: error message -#: src/modules/HttpServerWidgets.rb:3240 +#. translators: error message +#: src/modules/HttpServerWidgets.rb:3240 msgid "A name for the module to add is required." msgstr "추가하기 위한 모듈의 이름을 요구합니다." -#. translators: error message -#: src/modules/HttpServerWidgets.rb:3243 +#. translators: error message +#: src/modules/HttpServerWidgets.rb:3243 msgid "The module is already in the list." msgstr "해당모듈은 이미 목록에 있습니다." -#. FIXME: CreateListen error reporting -#. translators: error message for adding a new Listen statement -#: src/modules/HttpServerWidgets.rb:3306 +#. FIXME: CreateListen error reporting +#. translators: error message for adding a new Listen statement +#: src/modules/HttpServerWidgets.rb:3306 msgid "The entry '%1' already exists." msgstr "엔트리 '%1'는 이미 존재합니다." -#. translators: error message -#: src/modules/HttpServerWidgets.rb:3327 +#. translators: error message +#: src/modules/HttpServerWidgets.rb:3327 msgid "" "The list of the ports to which the server should\n" "listen cannot be empty." @@ -1505,343 +1422,321 @@ "서버가 수신하는 포트 목록은 비워 둘 수\n" "없습니다." -#. translators: popup error - multi selection box with server network adresses -#: src/modules/HttpServerWidgets.rb:3494 +#. translators: popup error - multi selection box with server network adresses +#: src/modules/HttpServerWidgets.rb:3494 msgid "At least one interface must be selected." msgstr "인터페이스를 적어도 하나는 선택해야 합니다." -#. translators: checkbox - support for php script language -#: src/modules/HttpServerWidgets.rb:3521 +#. translators: checkbox - support for php script language +#: src/modules/HttpServerWidgets.rb:3521 msgid "Enable &PHP5 Scripting" msgstr "PHP5 스크립팅 활성화(&P)" -#. translators: checkbox - support for perl script language -#: src/modules/HttpServerWidgets.rb:3529 +#. translators: checkbox - support for perl script language +#: src/modules/HttpServerWidgets.rb:3529 msgid "Enable P&erl Scripting" msgstr "Perl 스크립팅 활성화(&E)" -#. translators: checkbox - support for python script language -#: src/modules/HttpServerWidgets.rb:3537 +#. translators: checkbox - support for python script language +#: src/modules/HttpServerWidgets.rb:3537 msgid "Enable P&ython Scripting" msgstr "Python 스크립팅 활성화(&Y)" -#. illegal keys in vhost -#: src/modules/YaPI/HTTPD.pm:670 src/modules/YaPI/HTTPD.pm:753 +#. illegal keys in vhost +#: src/modules/YaPI/HTTPD.pm:670 src/modules/YaPI/HTTPD.pm:753 #, perl-format msgid "Illegal key in virtual host '%s'." msgstr "가상 호스트 '%s'에 잘못된 키가 있습니다." -#: src/modules/YaPI/HTTPD.pm:739 +#: src/modules/YaPI/HTTPD.pm:739 #, perl-format msgid "Internal Error: Data must be an array ref and not %s." msgstr "내부 오류: 데이터는 %s이(가) 아니라 배열 참조여야 합니다." -#: src/modules/YaPI/HTTPD.pm:764 +#: src/modules/YaPI/HTTPD.pm:764 msgid "Illegal host ID." msgstr "호스트 ID가 잘못되었습니다." -#: src/modules/YaPI/HTTPD.pm:786 +#: src/modules/YaPI/HTTPD.pm:786 msgid "hostid already exists" msgstr "호스트 ID는 이미 존재합니다." -#: src/modules/YaPI/HTTPD.pm:825 +#: src/modules/YaPI/HTTPD.pm:825 msgid "can not delete default host" msgstr "기본 호스트를 삭제할 수 없습니다." -#: src/modules/YaPI/HTTPD.pm:846 +#: src/modules/YaPI/HTTPD.pm:846 msgid "hostid not found" msgstr "hostid를 찾을 수 없습니다." -#: src/modules/YaPI/HTTPD.pm:1261 +#: src/modules/YaPI/HTTPD.pm:1261 msgid "illegal port" msgstr "잘못된 포트" -#: src/modules/YaPI/HTTPD.pm:1278 +#: src/modules/YaPI/HTTPD.pm:1278 msgid "writing the firewall rules failed" msgstr "방화벽 규칙 쓰기에 실패했습니다." -#: src/modules/YaPI/HTTPD.pm:1325 +#: src/modules/YaPI/HTTPD.pm:1325 msgid "listen value to delete not found" msgstr "삭제할 수신 값을 찾을 수 없습니다." -#: src/modules/YaPI/HTTPD.pm:1578 src/modules/YaPI/HTTPD.pm:1626 -#: src/modules/YaPI/HTTPD.pm:1671 src/modules/YaPI/HTTPD.pm:1754 -#: src/modules/YaPI/HTTPD.pm:1798 +#: src/modules/YaPI/HTTPD.pm:1578 src/modules/YaPI/HTTPD.pm:1626 +#: src/modules/YaPI/HTTPD.pm:1671 src/modules/YaPI/HTTPD.pm:1754 +#: src/modules/YaPI/HTTPD.pm:1798 msgid "Unable to fetch a host with the specified ID." msgstr "지정한 ID의 호스트를 가져올 수 없습니다." -#: src/modules/YaPI/HTTPD.pm:1587 src/modules/YaPI/HTTPD.pm:1634 -#: src/modules/YaPI/HTTPD.pm:1681 +#: src/modules/YaPI/HTTPD.pm:1587 src/modules/YaPI/HTTPD.pm:1634 +#: src/modules/YaPI/HTTPD.pm:1681 msgid "Corrupt PEM data." msgstr "PEM 데이터가 손상되었습니다." -#: src/modules/YaPI/HTTPD.pm:1761 +#: src/modules/YaPI/HTTPD.pm:1761 msgid "No certificate key file configured for this host ID." msgstr "이 호스트 ID에 대해 구성된 인증서 키 파일이 없습니다." -#: src/modules/YaPI/HTTPD.pm:1770 +#: src/modules/YaPI/HTTPD.pm:1770 msgid "Parsing the key file failed." msgstr "키 파일을 구문 분석하는 데 실패했습니다." -#: src/modules/YaPI/HTTPD.pm:1803 +#: src/modules/YaPI/HTTPD.pm:1803 msgid "No CA certificate file configured for this host ID." msgstr "이 호스트 ID에 대해 구성된 CA 인증서 파일이 없습니다." -#: src/modules/YaPI/HTTPDModules.pm:13 +#: src/modules/YaPI/HTTPDModules.pm:13 msgid "Provides access control based on client host name, IP address, etc." msgstr "클라이언트 호스트 이름, IP 주소 등에 기반한 액세스 제어를 제공합니다." -#: src/modules/YaPI/HTTPDModules.pm:21 +#: src/modules/YaPI/HTTPDModules.pm:21 msgid "Executing CGI scripts based on media type or request method" msgstr "미디어 유형 또는 요청 메소드에 기반한 CGI 스크립트 실행" -#: src/modules/YaPI/HTTPDModules.pm:30 -msgid "" -"Mapping different parts of the host file system in the document tree and for " -"URL redirection" +#: src/modules/YaPI/HTTPDModules.pm:30 +msgid "Mapping different parts of the host file system in the document tree and for URL redirection" msgstr "URL 리디렉션을 위해 문서 트리에 호스트 파일 시스템의 다른 부분 매핑" -#: src/modules/YaPI/HTTPDModules.pm:45 +#: src/modules/YaPI/HTTPDModules.pm:45 msgid "Basic authentication" msgstr "기본 인증" -#: src/modules/YaPI/HTTPDModules.pm:54 +#: src/modules/YaPI/HTTPDModules.pm:54 msgid "User authentication using text files" msgstr "텍스트 파일을 사용하여 사용자 인증" -#: src/modules/YaPI/HTTPDModules.pm:62 +#: src/modules/YaPI/HTTPDModules.pm:62 msgid "User Authorization" msgstr "사용자 인증" -#: src/modules/YaPI/HTTPDModules.pm:70 +#: src/modules/YaPI/HTTPDModules.pm:70 msgid "Group authorization using plaintext files" msgstr "일반 텍스트 파일을 사용하여 그룹 인증" -#: src/modules/YaPI/HTTPDModules.pm:79 +#: src/modules/YaPI/HTTPDModules.pm:79 msgid "User authentication using DBM files" msgstr "DBM 파일을 사용하여 사용자 인증" -#: src/modules/YaPI/HTTPDModules.pm:94 -msgid "" -"Generates directory indices, automatically, similar to the Unix ls command" +#: src/modules/YaPI/HTTPDModules.pm:94 +msgid "Generates directory indices, automatically, similar to the Unix ls command" msgstr "Unix ls 명령어와 유사한 디렉토리 색인을 자동으로 생성" -#: src/modules/YaPI/HTTPDModules.pm:115 +#: src/modules/YaPI/HTTPDModules.pm:115 msgid "Execution of CGI scripts" msgstr "CGI 스크립트 실행" -#: src/modules/YaPI/HTTPDModules.pm:126 +#: src/modules/YaPI/HTTPDModules.pm:126 msgid "Provides for trailing slash redirects and serving directory index files" -msgstr "" -"슬래시로 끝나는 스크립트 리디렉트와 디렉토리 색인 파일 지원을 제공합니다." +msgstr "슬래시로 끝나는 스크립트 리디렉트와 디렉토리 색인 파일 지원을 제공합니다." -#: src/modules/YaPI/HTTPDModules.pm:135 +#: src/modules/YaPI/HTTPDModules.pm:135 msgid "Modifies the environment passed to CGI scripts and SSI pages" msgstr "CGI 스크립트와 SSI 페이지에 전달된 환경 수정" -#: src/modules/YaPI/HTTPDModules.pm:145 +#: src/modules/YaPI/HTTPDModules.pm:145 msgid "Generation of Expires HTTP headers according to user-specified criteria" msgstr "사용자 지정된 기준에 따라 Expires HTTP 헤더 생성" -#: src/modules/YaPI/HTTPDModules.pm:160 +#: src/modules/YaPI/HTTPDModules.pm:160 msgid "Server-parsed HTML documents (Server Side Includes)" msgstr "서버 구문 분석된 HTML 문서(Server Side Includes)" -#: src/modules/YaPI/HTTPDModules.pm:174 +#: src/modules/YaPI/HTTPDModules.pm:174 msgid "Logging of the requests made to the server" msgstr "서버에 대한 요청 로깅" -#: src/modules/YaPI/HTTPDModules.pm:186 -msgid "" -"Associates the requested file name's extensions with the file's behavior and " -"content" +#: src/modules/YaPI/HTTPDModules.pm:186 +msgid "Associates the requested file name's extensions with the file's behavior and content" msgstr "요청된 파일 이름 확장자와 해당 파일의 동작과 내용 연결" -#: src/modules/YaPI/HTTPDModules.pm:211 +#: src/modules/YaPI/HTTPDModules.pm:211 msgid "Provides for content negotiation" msgstr "내용 조정 제공" -#: src/modules/YaPI/HTTPDModules.pm:221 -msgid "" -"Allows the setting of environment variables based on characteristics of the " -"request" +#: src/modules/YaPI/HTTPDModules.pm:221 +msgid "Allows the setting of environment variables based on characteristics of the request" msgstr "요청 특성에 기반한 환경 변수 설정 허용" -#: src/modules/YaPI/HTTPDModules.pm:232 +#: src/modules/YaPI/HTTPDModules.pm:232 msgid "Provides information about server activity and performance" msgstr "서버 활동과 성능에 대한 정보 제공" -#: src/modules/YaPI/HTTPDModules.pm:240 +#: src/modules/YaPI/HTTPDModules.pm:240 msgid "Allows CGI scripts to run as a specified user and group" msgstr "지정된 사용자와 그룹으로 실행하도록 CGI 스크립트 허용" -#: src/modules/YaPI/HTTPDModules.pm:251 +#: src/modules/YaPI/HTTPDModules.pm:251 msgid "User-specific directories" msgstr "사용자 관련 디렉토리" -#: src/modules/YaPI/HTTPDModules.pm:259 +#: src/modules/YaPI/HTTPDModules.pm:259 msgid "Sends files that contain their own HTTP headers" msgstr "자체 HTTP 헤더를 포함하는 파일 전송" -#: src/modules/YaPI/HTTPDModules.pm:265 +#: src/modules/YaPI/HTTPDModules.pm:265 msgid "Allows \"anonymous\" user access to authenticated areas" msgstr "인증된 영역에 대한 \"anonymous\" 사용자 액세스 허용" -#: src/modules/YaPI/HTTPDModules.pm:286 +#: src/modules/YaPI/HTTPDModules.pm:286 msgid "User authentication using MD5 Digest Authentication" msgstr "MD5 Digest 인증을 사용한 사용자 인증" -#: src/modules/YaPI/HTTPDModules.pm:301 -msgid "" -"Allows an LDAP directory to be used to store the database for HTTP Basic " -"authentication" -msgstr "" -"HTTP 기본 인증을 위해 데이타베이스 저장에 사용하도록 LDAP 디렉토리 허용" +#: src/modules/YaPI/HTTPDModules.pm:301 +msgid "Allows an LDAP directory to be used to store the database for HTTP Basic authentication" +msgstr "HTTP 기본 인증을 위해 데이타베이스 저장에 사용하도록 LDAP 디렉토리 허용" -#: src/modules/YaPI/HTTPDModules.pm:319 src/modules/YaPI/HTTPDModules.pm:494 +#: src/modules/YaPI/HTTPDModules.pm:319 src/modules/YaPI/HTTPDModules.pm:494 msgid "Content cache keyed to URIs" msgstr "URI에 키된 내용 캐시" -#: src/modules/YaPI/HTTPDModules.pm:336 +#: src/modules/YaPI/HTTPDModules.pm:336 msgid "Specify character set translation or recoding" msgstr "번역 또는 리코딩 문자 집합 지정" -#: src/modules/YaPI/HTTPDModules.pm:346 +#: src/modules/YaPI/HTTPDModules.pm:346 msgid "Distributed Authoring and Versioning (WebDAV) functionality" msgstr "분산된 작성 및 버전 관리(WebDAV) 기능" -#: src/modules/YaPI/HTTPDModules.pm:361 +#: src/modules/YaPI/HTTPDModules.pm:361 msgid "File system provider for mod_dav" msgstr "mod_dav의 파일 시스템 제공자" -#: src/modules/YaPI/HTTPDModules.pm:372 +#: src/modules/YaPI/HTTPDModules.pm:372 msgid "Compress content before it is delivered to the client" msgstr "클라이언트에 전송하기 전에 내용 압축" -#: src/modules/YaPI/HTTPDModules.pm:391 +#: src/modules/YaPI/HTTPDModules.pm:391 msgid "Content cache storage manager keyed to URIs" msgstr "URI에 키된 내용 캐시 저장 관리자" -#: src/modules/YaPI/HTTPDModules.pm:404 +#: src/modules/YaPI/HTTPDModules.pm:404 msgid "A simple echo server to illustrate protocol modules" msgstr "프로토콜 모듈을 설명하기 위한 간단한 에코 서버" -#: src/modules/YaPI/HTTPDModules.pm:412 -msgid "" -"Pass the response body through an external program before delivery to the " -"client" +#: src/modules/YaPI/HTTPDModules.pm:412 +msgid "Pass the response body through an external program before delivery to the client" msgstr "클라이언트에 전송하기 전에 외부 프로그램을 통해 응답 본문 전달 " -#: src/modules/YaPI/HTTPDModules.pm:425 +#: src/modules/YaPI/HTTPDModules.pm:425 msgid "Caches a static list of files in memory" msgstr "메모리에 파일 정적 목록을 캐시로 저장" -#: src/modules/YaPI/HTTPDModules.pm:435 +#: src/modules/YaPI/HTTPDModules.pm:435 msgid "Customization of HTTP request and response headers" msgstr "HTTP 요청 및 응답 헤더 사용자 정의" -#: src/modules/YaPI/HTTPDModules.pm:448 +#: src/modules/YaPI/HTTPDModules.pm:448 msgid "Server-side image map processing" msgstr "Server-side 이미지 맵 처리" -#: src/modules/YaPI/HTTPDModules.pm:459 +#: src/modules/YaPI/HTTPDModules.pm:459 msgid "Provides a comprehensive overview of the server configuration" msgstr "서버 구성의 광범위한 개요 제공" -#: src/modules/YaPI/HTTPDModules.pm:468 -msgid "" -"LDAP connection pooling and result caching services for use by other LDAP " -"modules" +#: src/modules/YaPI/HTTPDModules.pm:468 +msgid "LDAP connection pooling and result caching services for use by other LDAP modules" msgstr "LDAP 연결 풀링과 기타 LDAP 모듈로 사용하기 위한 결과 캐싱 서비스" -#: src/modules/YaPI/HTTPDModules.pm:488 +#: src/modules/YaPI/HTTPDModules.pm:488 msgid "Logging of input and output bytes per request" msgstr "요청당 입출력 바이트 로깅" -#: src/modules/YaPI/HTTPDModules.pm:508 -msgid "" -"Determines the MIME type of a file by looking at a few bytes of its contents" +#: src/modules/YaPI/HTTPDModules.pm:508 +msgid "Determines the MIME type of a file by looking at a few bytes of its contents" msgstr "내용의 몇 바이트를 조사하여 파일의 MIME 유형 결정" -#: src/modules/YaPI/HTTPDModules.pm:517 +#: src/modules/YaPI/HTTPDModules.pm:517 msgid "HTTP/1.1 proxy/gateway server" msgstr "HTTP/1.1 프록시/게이트웨이 서버" -#: src/modules/YaPI/HTTPDModules.pm:565 +#: src/modules/YaPI/HTTPDModules.pm:565 msgid "AJP support module for mod_proxy" msgstr "mod_proxy용 AJP 지원 모듈" -#: src/modules/YaPI/HTTPDModules.pm:572 +#: src/modules/YaPI/HTTPDModules.pm:572 msgid "mod_proxy extension for CONNECT request handling" msgstr "CONNECT 요청 핸들링을 연결하기 위한 mod_proxy 확장" -#: src/modules/YaPI/HTTPDModules.pm:579 +#: src/modules/YaPI/HTTPDModules.pm:579 msgid "FTP support module for mod_proxy" msgstr "mod_proxy에 대한 FTP 지원 모듈" -#: src/modules/YaPI/HTTPDModules.pm:585 +#: src/modules/YaPI/HTTPDModules.pm:585 msgid "HTTP support module for mod_proxy" msgstr "mod_proxy에 대한 HTTP 지원 모듈" -#: src/modules/YaPI/HTTPDModules.pm:591 -msgid "" -"Provides a rule-based rewriting engine to rewrite requested URLs on the fly" +#: src/modules/YaPI/HTTPDModules.pm:591 +msgid "Provides a rule-based rewriting engine to rewrite requested URLs on the fly" msgstr "요청된 URL을 바로 재작성하기 위해 규칙 기반 재작성 엔진 제공" -#: src/modules/YaPI/HTTPDModules.pm:618 +#: src/modules/YaPI/HTTPDModules.pm:618 msgid "Attempts to correct mistaken URLs that users might have entered" msgstr "사용자가 입력했을 수 있는 잘못된 URL을 수정하기 위한 시도" -#: src/modules/YaPI/HTTPDModules.pm:627 -msgid "" -"Strong cryptography using the Secure Sockets Layer (SSL) and Transport Layer " -"Security (TLS) protocols" -msgstr "" -"Secure Sockets Layer(SSL)와 Transport Layer Security(TLS) 프로토콜을 사용한 " -"강력한 암호화 방법" +#: src/modules/YaPI/HTTPDModules.pm:627 +msgid "Strong cryptography using the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) protocols" +msgstr "Secure Sockets Layer(SSL)와 Transport Layer Security(TLS) 프로토콜을 사용한 강력한 암호화 방법" -#: src/modules/YaPI/HTTPDModules.pm:667 -msgid "" -"Provides an environment variable with a unique identifier for each request" +#: src/modules/YaPI/HTTPDModules.pm:667 +msgid "Provides an environment variable with a unique identifier for each request" msgstr "각 요청에 대한 고유 식별자와 함께 환경 변수 제공" -#: src/modules/YaPI/HTTPDModules.pm:673 +#: src/modules/YaPI/HTTPDModules.pm:673 msgid "Clickstream logging of user activity on a site" msgstr "사이트의 사용자 활동에 대한 클릭스트림 로깅" -#: src/modules/YaPI/HTTPDModules.pm:693 +#: src/modules/YaPI/HTTPDModules.pm:693 msgid "Provides support for dynamically configured mass virtual hosting" msgstr "동적 구성된 대량 가상 호스팅에 대한 지원 제공" -#: src/modules/YaPI/HTTPDModules.pm:710 +#: src/modules/YaPI/HTTPDModules.pm:710 msgid "Provides support for PHP5 dynamically generated pages" msgstr "PHP5 동적 생성 페이지에 대한 지원 제공" -#: src/modules/YaPI/HTTPDModules.pm:716 +#: src/modules/YaPI/HTTPDModules.pm:716 msgid "Provides support for Perl dynamically generated pages" msgstr "Perl 동적 생성된 페이지에 대한 지원 제공" -#: src/modules/YaPI/HTTPDModules.pm:722 +#: src/modules/YaPI/HTTPDModules.pm:722 msgid "Provides support for Python dynamically generated pages" msgstr "Python 동적 생성된 페이지에 대한 지원 제공" -#: src/modules/YaPI/HTTPDModules.pm:728 +#: src/modules/YaPI/HTTPDModules.pm:728 msgid "Provides support for AppArmor subprocess confinement within apache" msgstr "apache의 AppArmor 하위 프로세스 제한에 대한 지원 제공" -#: src/modules/YaPI/HTTPDModules.pm:734 src/modules/YaPI/HTTPDModules.pm:741 +#: src/modules/YaPI/HTTPDModules.pm:734 src/modules/YaPI/HTTPDModules.pm:741 msgid "Provides support for subversion" msgstr "하위 버전에 대한 지원을 제공합니다." -#: src/modules/YaST/httpdUtils.pm:22 +#: src/modules/YaST/httpdUtils.pm:22 msgid "Host not found" msgstr "호스트를 찾을 수 없습니다." -#: src/modules/YaST/httpdUtils.pm:58 +#: src/modules/YaST/httpdUtils.pm:58 #, perl-format msgid "Illegal '%s' parameter" msgstr "잘못된 '%s' 매개변수" -#: src/modules/YaST/httpdUtils.pm:62 +#: src/modules/YaST/httpdUtils.pm:62 msgid "ssl together with \"virtual by name\" is not possible" msgstr "ssl을 \"이름에 의한 가상\"과 함께 사용할 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/inetd.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/inetd.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/inetd.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,275 +14,273 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. is this proposal or not? -#: src/clients/inetd.rb:63 +#. is this proposal or not? +#: src/clients/inetd.rb:63 msgid "Configuration of Network Services (xinetd)" msgstr "네트워크 서비스 구성(xinetd)" -#. translators: command line help text for "summary" action -#: src/clients/inetd.rb:87 +#. translators: command line help text for "summary" action +#: src/clients/inetd.rb:87 msgid "Show the status of current system services" msgstr "현재 시스템 서비스 상태 표시" -#. translators: command line help text for "id" option -#: src/clients/inetd.rb:99 +#. translators: command line help text for "id" option +#: src/clients/inetd.rb:99 msgid "Unique identifier" msgstr "고유한 식별자" -#. translators: command line help text for "service" option -#: src/clients/inetd.rb:106 +#. translators: command line help text for "service" option +#: src/clients/inetd.rb:106 msgid "Service name" msgstr "서비스 이름" -#. translators: command line help text for "disable" option -#: src/clients/inetd.rb:113 +#. translators: command line help text for "disable" option +#: src/clients/inetd.rb:113 msgid "Disable service" msgstr "서비스 비활성화" -#. translators: command line help text for "rpc_version" option -#: src/clients/inetd.rb:121 +#. translators: command line help text for "rpc_version" option +#: src/clients/inetd.rb:121 msgid "RPC version of RPC service" msgstr "RPC 서비스의 RPC 버전" -#. translators: command line help text for "socket_type" option -#: src/clients/inetd.rb:128 +#. translators: command line help text for "socket_type" option +#: src/clients/inetd.rb:128 msgid "Socket type" msgstr "소켓 형식" -#. translators: command line help text for "protocol" option -#: src/clients/inetd.rb:136 +#. translators: command line help text for "protocol" option +#: src/clients/inetd.rb:136 msgid "Internet (IP) protocols" msgstr "인터넷(IP) 프로토콜" -#. translators: command line help text for "wait" option -#: src/clients/inetd.rb:144 +#. translators: command line help text for "wait" option +#: src/clients/inetd.rb:144 msgid "Wait attribute" msgstr "대기 속성" -#. translators: command line help text for "user" option -#: src/clients/inetd.rb:152 +#. translators: command line help text for "user" option +#: src/clients/inetd.rb:152 msgid "Determines the uid for the server process" msgstr "서버 프로세스에 대한 uid 지정" -#. translators: command line help text for "group" option -#: src/clients/inetd.rb:159 +#. translators: command line help text for "group" option +#: src/clients/inetd.rb:159 msgid "Determines the gid for the server process" msgstr "서버 프로세스에 대한 gid 지정" -#. translators: command line help text for "server" option -#: src/clients/inetd.rb:166 +#. translators: command line help text for "server" option +#: src/clients/inetd.rb:166 msgid "Path name of program to execute" msgstr "실행할 프로그램의 경로 이름" -#. translators: command line help text for "server_args" option -#: src/clients/inetd.rb:173 +#. translators: command line help text for "server_args" option +#: src/clients/inetd.rb:173 msgid "Parameters for server" msgstr "서버의 매개변수" -#. translators: command line help text for "comment" option -#: src/clients/inetd.rb:180 +#. translators: command line help text for "comment" option +#: src/clients/inetd.rb:180 msgid "User comment" msgstr "사용자 주석" -#. translators: error message for command line -#: src/clients/inetd.rb:345 +#. translators: error message for command line +#: src/clients/inetd.rb:345 msgid "You must specify a service ID." msgstr "서비스 ID를 지정해야 합니다." -#. translators: error message for command line -#: src/clients/inetd.rb:356 +#. translators: error message for command line +#: src/clients/inetd.rb:356 msgid "Specify the service using a 'service' option." msgstr "'service' 옵션을 사용하여 서비스를 지정하십시오." -#. translators: error message for command line -#. translators: error message for command line -#: src/clients/inetd.rb:371 src/clients/inetd.rb:391 +#. translators: error message for command line +#. translators: error message for command line +#: src/clients/inetd.rb:371 src/clients/inetd.rb:391 msgid "The 'id' option cannot be combined with other options." msgstr "'id' 옵션은 다른 옵션과 함께 사용할 수 없습니다." -#: src/clients/inetd.rb:401 src/include/inetd/dialogs.rb:356 +#: src/clients/inetd.rb:401 src/include/inetd/dialogs.rb:356 msgid "Status" msgstr "상태" -#: src/clients/inetd.rb:402 src/include/inetd/dialogs.rb:357 +#: src/clients/inetd.rb:402 src/include/inetd/dialogs.rb:357 msgid "Service" msgstr "서비스" -#: src/clients/inetd.rb:403 +#: src/clients/inetd.rb:403 msgid "Type" msgstr "형식" -#: src/clients/inetd.rb:404 +#: src/clients/inetd.rb:404 msgid "Prot." msgstr "Prot." -#: src/clients/inetd.rb:405 src/include/inetd/dialogs.rb:360 +#: src/clients/inetd.rb:405 src/include/inetd/dialogs.rb:360 msgid "Wait" msgstr "대기" -#: src/clients/inetd.rb:406 src/include/inetd/dialogs.rb:361 +#: src/clients/inetd.rb:406 src/include/inetd/dialogs.rb:361 msgid "User" msgstr "사용자" -#: src/clients/inetd.rb:407 src/include/inetd/dialogs.rb:362 +#: src/clients/inetd.rb:407 src/include/inetd/dialogs.rb:362 msgid "Server" msgstr "서버" -#. id, -#. Translators: Service status: On = running, --- = stopped -#: src/clients/inetd.rb:437 src/include/inetd/routines.rb:191 +#. id, +#. Translators: Service status: On = running, --- = stopped +#: src/clients/inetd.rb:437 src/include/inetd/routines.rb:191 msgid "On" msgstr "켜기" -#: src/clients/inetd.rb:438 +#: src/clients/inetd.rb:438 msgid "Off" msgstr "해제" -#. determine wait mode (convert to string) -#: src/clients/inetd.rb:442 src/include/inetd/dialogs.rb:855 -#: src/include/inetd/routines.rb:211 +#. determine wait mode (convert to string) +#: src/clients/inetd.rb:442 src/include/inetd/dialogs.rb:855 +#: src/include/inetd/routines.rb:211 msgid "Yes" msgstr "예" -#: src/clients/inetd.rb:442 src/include/inetd/dialogs.rb:855 -#: src/include/inetd/routines.rb:213 +#: src/clients/inetd.rb:442 src/include/inetd/dialogs.rb:855 +#: src/include/inetd/routines.rb:213 msgid "No" msgstr "아니오" -#. create titles -#: src/clients/inetd_proposal.rb:81 +#. create titles +#: src/clients/inetd_proposal.rb:81 msgid "Xinetd" msgstr "Xinetd" -#: src/clients/inetd_proposal.rb:82 +#: src/clients/inetd_proposal.rb:82 msgid "&Xinetd" msgstr "Xinetd(&X)" -#. Translators: In autoinstallation mode: -#. The package name is stored in %1. This is Popup::ContinueCancel. -#: src/include/inetd/dialogs.rb:164 +#. Translators: In autoinstallation mode: +#. The package name is stored in %1. This is Popup::ContinueCancel. +#: src/include/inetd/dialogs.rb:164 msgid "Package %1 will be installed during the write process." msgstr "%1 패키지가 저장 프로세스 동안에 설치되어질 것입니다." -#. if (true) { // for debugging -#. Translators: The package name is stored in %1. This is Popup::Message. -#: src/include/inetd/dialogs.rb:183 +#. if (true) { // for debugging +#. Translators: The package name is stored in %1. This is Popup::Message. +#: src/include/inetd/dialogs.rb:183 msgid "Package %1 was not installed. The service cannot be edited." msgstr "%1 패키지가 설치되지 않았습니다. 서비스가 편집될수 없습니다." -#. Translators: The package name is stored in %1 -#: src/include/inetd/dialogs.rb:205 +#. Translators: The package name is stored in %1 +#: src/include/inetd/dialogs.rb:205 msgid "Package %1 was successfully installed." msgstr "%1 패키지를 성공적으로 설치했습니다." -#. This is main inetd module dialog. -#. @return dialog result -#: src/include/inetd/dialogs.rb:303 +#. This is main inetd module dialog. +#. @return dialog result +#: src/include/inetd/dialogs.rb:303 msgid "&Activate All Services" msgstr "모든 서비스 활성화(&A)" -#: src/include/inetd/dialogs.rb:304 +#: src/include/inetd/dialogs.rb:304 msgid "&Deactivate All Services" msgstr "모든 서비스 비활성화(&D)" -#. Translators: Initial and target state of xinetd (or inetd) -#: src/include/inetd/dialogs.rb:339 +#. Translators: Initial and target state of xinetd (or inetd) +#: src/include/inetd/dialogs.rb:339 msgid "D&isable" msgstr "비활성화(&I)" -#: src/include/inetd/dialogs.rb:340 +#: src/include/inetd/dialogs.rb:340 msgid "Enab&le" msgstr "활성화(&L)" -#. Main dialog edit inetd.conf -#. Translators: Name of table with services (echo, chargen, ...) -#: src/include/inetd/dialogs.rb:347 +#. Main dialog edit inetd.conf +#. Translators: Name of table with services (echo, chargen, ...) +#: src/include/inetd/dialogs.rb:347 msgid "Currently Available Services" msgstr "현재 사용가능한 서비스" -#. `opt(`notify), -#. `opt(`keepSorting), -#: src/include/inetd/dialogs.rb:355 +#. `opt(`notify), +#. `opt(`keepSorting), +#: src/include/inetd/dialogs.rb:355 msgid "Ch" msgstr "Ch" -#: src/include/inetd/dialogs.rb:358 +#: src/include/inetd/dialogs.rb:358 msgid "Type " msgstr "형식" -#: src/include/inetd/dialogs.rb:359 +#: src/include/inetd/dialogs.rb:359 msgid "Protocol" msgstr "프로토콜" -#: src/include/inetd/dialogs.rb:363 +#: src/include/inetd/dialogs.rb:363 msgid "Server / Args" msgstr "서버 / 매개변수" -#. Translators: Add service -#: src/include/inetd/dialogs.rb:373 +#. Translators: Add service +#: src/include/inetd/dialogs.rb:373 msgid "&Add" msgstr "추가(&A)" -#. Translators: Edit service -#: src/include/inetd/dialogs.rb:376 +#. Translators: Edit service +#: src/include/inetd/dialogs.rb:376 msgid "&Edit" msgstr "편집(&E)" -#. Translators: Delete service -#: src/include/inetd/dialogs.rb:379 +#. Translators: Delete service +#: src/include/inetd/dialogs.rb:379 msgid "&Delete" msgstr "삭제(&D)" -#. Translators: Change service status -#: src/include/inetd/dialogs.rb:387 +#. Translators: Change service status +#: src/include/inetd/dialogs.rb:387 msgid "&Toggle Status (On or Off)" msgstr "토글 상태(켜기 또는 끄기)(&T)" -#: src/include/inetd/dialogs.rb:399 +#: src/include/inetd/dialogs.rb:399 msgid "Status for All &Services" msgstr "모든 서비스들에 대한 상태(&S)" -#. Inetd configure dialog caption -#: src/include/inetd/dialogs.rb:413 +#. Inetd configure dialog caption +#: src/include/inetd/dialogs.rb:413 msgid "Network Service Configuration (xinetd)" msgstr "네트워크 서비스 구성(xinetd)" -#. execute dialog -#. Translators: Caption for EditOrCreateServiceDlg() -#: src/include/inetd/dialogs.rb:504 +#. execute dialog +#. Translators: Caption for EditOrCreateServiceDlg() +#: src/include/inetd/dialogs.rb:504 msgid "Add a New Service Entry" msgstr "새로운 서비스 항목 추가" -#. Translators: Popup::Error -#: src/include/inetd/dialogs.rb:534 +#. Translators: Popup::Error +#: src/include/inetd/dialogs.rb:534 msgid "Cannot delete the service. It is not installed." msgstr "그 서비스를 삭제할 수 없습니다. 그것은 설치되지 않았습니다." -#. Translators: Popup::Message -#: src/include/inetd/dialogs.rb:558 +#. Translators: Popup::Message +#: src/include/inetd/dialogs.rb:558 msgid "To delete a service, select one in the main dialog" msgstr "서비스를 삭제하기 위해서, 주요 대화상자안에 하나를 선택하십시오." -#. Translators: Popup::Message -#: src/include/inetd/dialogs.rb:605 +#. Translators: Popup::Message +#: src/include/inetd/dialogs.rb:605 msgid "To activate or deactivate a service, select one in the main dialog." -msgstr "" -"서비스의 활성화 또는 비활성화 시키기위해서, 주요 대화상자안에 하나를 선택하십" -"시오." +msgstr "서비스의 활성화 또는 비활성화 시키기위해서, 주요 대화상자안에 하나를 선택하십시오." -#. y2milestone("Current line %1", current_line); -#. Translators: Caption of EditOrCreateServiceDlg() -#: src/include/inetd/dialogs.rb:742 +#. y2milestone("Current line %1", current_line); +#. Translators: Caption of EditOrCreateServiceDlg() +#: src/include/inetd/dialogs.rb:742 msgid "Edit a service entry" msgstr "서비스 항목 편집" -#. Translators: Popup::Message -#: src/include/inetd/dialogs.rb:757 +#. Translators: Popup::Message +#: src/include/inetd/dialogs.rb:757 msgid "To edit a service, select one in the main dialog" msgstr "서비스를 편집하기 위해서, 주요 대화상자안에 하나를 선택하십시오." -#. Translators: Popup::Warning -#: src/include/inetd/dialogs.rb:788 +#. Translators: Popup::Warning +#: src/include/inetd/dialogs.rb:788 msgid "" "All services are marked as disabled (locked).\n" "Internet super-server will be disabled." @@ -290,76 +288,76 @@ "모든 서비스는 비활성화로써 설정되었습니다.(잠김)\n" "인터넷 super-server는 비활성화될 것입니다." -#. service name -#: src/include/inetd/dialogs.rb:811 +#. service name +#: src/include/inetd/dialogs.rb:811 msgid "&Service" msgstr "서비스(&S)" -#: src/include/inetd/dialogs.rb:813 +#: src/include/inetd/dialogs.rb:813 msgid "RPC Versio&n" msgstr "RPC 버전 (&N)" -#. service status (running or stopped) -#: src/include/inetd/dialogs.rb:819 +#. service status (running or stopped) +#: src/include/inetd/dialogs.rb:819 msgid "Service is acti&ve." msgstr "서비스가 활성화되었습니다.(&V)" -#. service socket type -#: src/include/inetd/dialogs.rb:832 +#. service socket type +#: src/include/inetd/dialogs.rb:832 msgid "Socket T&ype" msgstr "소켓 형식(&Y)" -#. for protocol option - ediatble ComboBox -#: src/include/inetd/dialogs.rb:843 +#. for protocol option - ediatble ComboBox +#: src/include/inetd/dialogs.rb:843 msgid "&Protocol" msgstr "프로토콜(&P)" -#. for flags (wait/nowait) - noneditable ComboBox -#: src/include/inetd/dialogs.rb:854 +#. for flags (wait/nowait) - noneditable ComboBox +#: src/include/inetd/dialogs.rb:854 msgid "&Wait" msgstr "대기(&W)" -#. user and group ComboBoxes -#: src/include/inetd/dialogs.rb:864 +#. user and group ComboBoxes +#: src/include/inetd/dialogs.rb:864 msgid "&User" msgstr "사용자(&U)" -#: src/include/inetd/dialogs.rb:866 +#: src/include/inetd/dialogs.rb:866 msgid "&Group" msgstr "그룹(&G)" -#. Server arguments -#: src/include/inetd/dialogs.rb:869 +#. Server arguments +#: src/include/inetd/dialogs.rb:869 msgid "S&erver" msgstr "서버(&E)" -#: src/include/inetd/dialogs.rb:870 +#: src/include/inetd/dialogs.rb:870 msgid "Server Argumen&ts" msgstr "서버 매개변수(&T)" -#. Comment above the service line in inetd.conf -#: src/include/inetd/dialogs.rb:872 +#. Comment above the service line in inetd.conf +#: src/include/inetd/dialogs.rb:872 msgid "Co&mment" msgstr "주석(&M)" -#. Translators: Please BE CAREFUL! This text is often used in code! This Translation must be the same. -#. do not add a "flags" field, it's currently in "unparsed" -#. Read user names from passwd. -#. It does not get the NIS entries. -#. "+" is filtered out. -#. @return [Array] users -#. Read group names from group -#. It does not get the NIS entries. -#. "+" is filtered out. -#. @return [Array] groups -#: src/include/inetd/dialogs.rb:918 src/include/inetd/dialogs.rb:956 -#: src/include/inetd/dialogs.rb:961 src/include/inetd/dialogs.rb:1000 -#: src/include/inetd/routines.rb:333 src/include/inetd/routines.rb:353 +#. Translators: Please BE CAREFUL! This text is often used in code! This Translation must be the same. +#. do not add a "flags" field, it's currently in "unparsed" +#. Read user names from passwd. +#. It does not get the NIS entries. +#. "+" is filtered out. +#. @return [Array] users +#. Read group names from group +#. It does not get the NIS entries. +#. "+" is filtered out. +#. @return [Array] groups +#: src/include/inetd/dialogs.rb:918 src/include/inetd/dialogs.rb:956 +#: src/include/inetd/dialogs.rb:961 src/include/inetd/dialogs.rb:1000 +#: src/include/inetd/routines.rb:333 src/include/inetd/routines.rb:353 msgid "--default--" msgstr "--기본--" -#. Translators: Popup::Message -#: src/include/inetd/dialogs.rb:946 +#. Translators: Popup::Message +#: src/include/inetd/dialogs.rb:946 msgid "" "Service is empty.\n" "Enter valid values.\n" @@ -367,28 +365,28 @@ "서비스가 비어있습니다.\n" "유효한 값들을 입력하십시오.\n" -#. Error message -#: src/include/inetd/dialogs.rb:952 +#. Error message +#: src/include/inetd/dialogs.rb:952 msgid "Service name contains disallowed character \"/\"." msgstr "서비스 이름에 허용되지 않는 문자 \"/\"가 포함되어 있습니다." -#. Translators: sformat-ed() 3 strings -#: src/include/inetd/dialogs.rb:960 +#. Translators: sformat-ed() 3 strings +#: src/include/inetd/dialogs.rb:960 msgid "The user %1 is reserved for internal server processes only." msgstr "%1 사용자는 단지 내부 서버 프로세스을 위하여 예약되었습니다." -#. Popup::Error -#: src/include/inetd/helps.rb:38 +#. Popup::Error +#: src/include/inetd/helps.rb:38 msgid "No packages selected. Configuration aborted." msgstr "선택된 패키지가 없습니다. 설정이 중단됩니다." -#. Not used! -#: src/include/inetd/helps.rb:42 +#. Not used! +#: src/include/inetd/helps.rb:42 msgid "Selected packages will be installed." msgstr "선택된 패키지가 설치될 것입니다." -#. Read dialog help 1/2 -#: src/include/inetd/helps.rb:46 +#. Read dialog help 1/2 +#: src/include/inetd/helps.rb:46 msgid "" "<p><b><big>Initializing xinetd Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -396,18 +394,17 @@ "<p><b><big>xinetd 구성 초기화 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/inetd/helps.rb:50 +#. Read dialog help 2/2 +#: src/include/inetd/helps.rb:50 msgid "" "<p><b><big>Aborting the Initialization Process:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" msgstr "" "<p><b><big>초기화 프로세스 중단:</big></b><br>\n" -"지금 <b>중단</b>를 누름으로써 설정 유틸리티를 안전하게 중단할 수 있습니다.\n" +"지금 <b>중단</b>를 누름으로써 설정 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/inetd/helps.rb:54 +#. Write dialog help 1/2 +#: src/include/inetd/helps.rb:54 msgid "" "<p><b><big>Saving xinetd Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -415,8 +412,8 @@ "<p><b><big>xinetd 구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/inetd/helps.rb:58 +#. Write dialog help 2/2 +#: src/include/inetd/helps.rb:58 msgid "" "<p><b><big>Aborting the Save Process:</big></b><br>\n" "Abort saving by pressing <b>Abort</b>.\n" @@ -428,54 +425,48 @@ "추가적인 대화상자는 안전한지를 여러분에게 알려줄 것입니다.\n" "</P>\n" -#. Configure1 dialog help 1/2 -#: src/include/inetd/helps.rb:65 +#. Configure1 dialog help 1/2 +#: src/include/inetd/helps.rb:65 msgid "" "<p><b><big>Network Service Configuration</big></b><br>\n" "Click <b>Enable</b> to enable network services managed by a super-server\n" "configuration. To stop the super-server, click <b>Disable</b>.</p>\n" msgstr "" "<p><b><big>네트워크 서비스 구성</big></b><br>\n" -"수퍼 서버 구성을 통해 관리되는 네트워크 서비스를 활성화하려면 <b>활성화</b>" -"를\n" +"수퍼 서버 구성을 통해 관리되는 네트워크 서비스를 활성화하려면 <b>활성화</b>를\n" " 클릭합니다. 수퍼 서버를 중지하려면 <b>비활성화</b>를 클릭합니다.</p>\n" -#: src/include/inetd/helps.rb:70 +#: src/include/inetd/helps.rb:70 msgid "" "<p><b><big>Configuration Service Status:</big></b><br>\n" "All services marked with <b>X</b> in column <b>Ch</b> were edited\n" "and will be changed in the system configuration.</p>\n" msgstr "" "<p><b><big>서비스 설정 상태:\n" -msgstr "" -"<p>이것은 짧은 설명입니다. 자세한 설명을 보려면 <b>info xinetd.conf</b>를 참" -"조하십시오.</p>\n" +#: src/include/inetd/helps.rb:122 +msgid "<p>This is a short description. For details, see <b>info xinetd.conf</b>.</p>\n" +msgstr "<p>이것은 짧은 설명입니다. 자세한 설명을 보려면 <b>info xinetd.conf</b>를 참조하십시오.</p>\n" -#: src/include/inetd/helps.rb:125 +#: src/include/inetd/helps.rb:125 msgid "" "<p>Enter a valid service name into the <b>service</b> field.\n" "</p>\n" @@ -564,7 +550,7 @@ "<p><b>서비스</b>필드안에 유효한 서비스 이름을 넣으십시오.\n" "</p>\n" -#: src/include/inetd/helps.rb:128 +#: src/include/inetd/helps.rb:128 msgid "" "<p>The <b>socket type</b> should be stream, dgram, raw, or seqpacket,\n" "depending on whether the service is stream-based, is datagram-based,\n" @@ -576,20 +562,17 @@ " 필요로 하거나 신뢰할 수 있는 순차 데이터그램 전송을\n" " 필요로 합니다.</p>\n" -#: src/include/inetd/helps.rb:134 +#: src/include/inetd/helps.rb:134 msgid "" -"<p>The <b>protocol</b> must be a valid protocol as specified in /etc/" -"protocols.\n" +"<p>The <b>protocol</b> must be a valid protocol as specified in /etc/protocols.\n" "Examples include <i>tcp</i>,<i>udp</i>,<i>rpc/tcp</i>, and <i>rpc/udp</i>.\n" "</p>\n" msgstr "" -"<p><b>프로토콜</b>은 반드시 /etc/protocols 파일에 지정된 유효한 프로토콜이어" -"야 합니다.\n" -"예로 <i>tcp</i>,<i>udp</i>,<i>rpc/tcp</i>, 그리고 <i>rpc/udp</i> 포함합니" -"다.\n" +"<p><b>프로토콜</b>은 반드시 /etc/protocols 파일에 지정된 유효한 프로토콜이어야 합니다.\n" +"예로 <i>tcp</i>,<i>udp</i>,<i>rpc/tcp</i>, 그리고 <i>rpc/udp</i> 포함합니다.\n" "</p>\n" -#: src/include/inetd/helps.rb:139 +#: src/include/inetd/helps.rb:139 msgid "" "<p>The <b>wait/nowait</b> entry determines if the service is\n" "single-threaded or multithreaded and whether xinetd accepts the\n" @@ -617,7 +600,7 @@ " 이는 udp가 연결 지향적이지 않기 때문입니다. <i>tcp/stream</i>\n" " 서버는 보통 <b>no</b> 값을 기대합니다.</p>\n" -#: src/include/inetd/helps.rb:153 +#: src/include/inetd/helps.rb:153 msgid "" "<p>The server will be run with the permissions of the user selected in\n" "<b>User</b>. This is useful to make services run with permissions\n" @@ -629,7 +612,7 @@ "\n" "</p>\n" -#: src/include/inetd/helps.rb:159 +#: src/include/inetd/helps.rb:159 msgid "" "<p>In <b>Server</b>, enter the path name of the program to\n" "be executed by the super-server when a request reaches its socket.\n" @@ -643,81 +626,81 @@ "\n" "</p>\n" -#. Translators: This string you can leave unchanged -#: src/include/inetd/routines.rb:194 +#. Translators: This string you can leave unchanged +#: src/include/inetd/routines.rb:194 msgid "---" msgstr "---" -#. Translators: This is used for status "Not Installed". -#. Please, make the -#. translation as short as possible. -#: src/include/inetd/routines.rb:206 +#. Translators: This is used for status "Not Installed". +#. Please, make the +#. translation as short as possible. +#: src/include/inetd/routines.rb:206 msgid "NI" msgstr "NI" -#. Whole configuration of inetd but without reading and writing. -#. For use with autoinstallation. -#. @return sequence result -#: src/include/inetd/wizards.rb:87 +#. Whole configuration of inetd but without reading and writing. +#. For use with autoinstallation. +#. @return sequence result +#: src/include/inetd/wizards.rb:87 msgid "Xinetd Configuration" msgstr "Xinetd 구성" -#: src/include/inetd/wizards.rb:88 +#: src/include/inetd/wizards.rb:88 msgid "Initializing ..." msgstr "초기화중 ..." -#. Inetd read dialog caption -#: src/modules/Inetd.rb:188 +#. Inetd read dialog caption +#: src/modules/Inetd.rb:188 msgid "Initializing inetd Configuration" msgstr "inetd 설정 초기화" -#: src/modules/Inetd.rb:196 +#: src/modules/Inetd.rb:196 msgid "Read the Configuration" msgstr "설정 불러오기" -#: src/modules/Inetd.rb:197 +#: src/modules/Inetd.rb:197 msgid "Reading the configuration..." msgstr "설정 불러오는중..." -#. read database -#: src/modules/Inetd.rb:197 src/modules/Inetd.rb:214 src/modules/Inetd.rb:278 -#: src/modules/Inetd.rb:306 +#. read database +#: src/modules/Inetd.rb:197 src/modules/Inetd.rb:214 src/modules/Inetd.rb:278 +#: src/modules/Inetd.rb:306 msgid "Finished" msgstr "완료되었습니다." -#. Inetd read dialog caption -#: src/modules/Inetd.rb:269 +#. Inetd read dialog caption +#: src/modules/Inetd.rb:269 msgid "Saving inetd Configuration" msgstr "inetd 설정 저장" -#: src/modules/Inetd.rb:277 +#: src/modules/Inetd.rb:277 msgid "Write the settings" msgstr "설정 기록" -#: src/modules/Inetd.rb:278 +#: src/modules/Inetd.rb:278 msgid "Writing the settings..." msgstr "설정을 기록하는중..." -#. in future: catch errors -#: src/modules/Inetd.rb:303 +#. in future: catch errors +#: src/modules/Inetd.rb:303 msgid "Cannot write settings!" msgstr "설정을 기록할 수 없습니다." -#. "enabled" defaults to true -#: src/modules/Inetd.rb:598 +#. "enabled" defaults to true +#: src/modules/Inetd.rb:598 msgid "<p><ul><i>All services are marked as stopped.</i></ul></p>" msgstr "<p><ul><i>모든 서비스들은 중지로 설정되어 있습니다.</i></ul></p>" -#. Translators: Summary head, if nothing configured -#: src/modules/Inetd.rb:609 +#. Translators: Summary head, if nothing configured +#: src/modules/Inetd.rb:609 msgid "Network services" msgstr "네트워크 서비스" -#. Translators: Summary head, if something configured -#: src/modules/Inetd.rb:613 +#. Translators: Summary head, if something configured +#: src/modules/Inetd.rb:613 msgid "Network services are managed via %1" msgstr "네트워크 서비스들은 %1에 의해 관리됩니다." -#: src/modules/Inetd.rb:616 +#: src/modules/Inetd.rb:616 msgid "These services will be enabled" msgstr "이 서비스들은 사용가능하게 될 것입니다." Modified: branches/SLE12-SP3/yast/ko/po/installation.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/installation.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/installation.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,32 +14,32 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. help for the dialog - busy message -#: src/include/installation/inst_inc_all.rb:52 +#. help for the dialog - busy message +#: src/include/installation/inst_inc_all.rb:52 msgid "<p>Initializing the installation...</p>" msgstr "<p>설치 초기화 중...</p>" -#. dialog content - busy message -#: src/include/installation/inst_inc_all.rb:57 +#. dialog content - busy message +#: src/include/installation/inst_inc_all.rb:57 msgid "Preparing the 1st system configuration..." msgstr "첫 번째 시스템 구성 준비 중..." -#. help for the dialog - busy message -#. TRANSLATORS: dialog help -#: src/include/installation/inst_inc_all.rb:59 -#: src/lib/installation/clients/inst_initialization.rb:48 +#. help for the dialog - busy message +#. TRANSLATORS: dialog help +#: src/include/installation/inst_inc_all.rb:59 +#: src/lib/installation/clients/inst_initialization.rb:48 msgid "<p>Please wait...</p>" msgstr "<p>잠시 기다리십시오.</p>" -#. dialog caption -#. TRANSLATORS: progress message -#: src/include/installation/inst_inc_all.rb:64 -#: src/lib/installation/clients/inst_installation_options.rb:151 +#. dialog caption +#. TRANSLATORS: progress message +#: src/include/installation/inst_inc_all.rb:64 +#: src/lib/installation/clients/inst_installation_options.rb:151 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. TRANSLATORS: Error message -#: src/include/installation/inst_inc_all.rb:77 +#. TRANSLATORS: Error message +#: src/include/installation/inst_inc_all.rb:77 msgid "" "No installation control file has been found,\n" "the installer cannot continue." @@ -47,23 +47,23 @@ "설치 제어 파일을 찾을 수 없습니다,\n" "설치 관리자를 계속할 수 없습니다." -#. TRANSLATORS: busy message -#. progress step title -#: src/include/installation/inst_inc_all.rb:112 -#: src/lib/installation/clients/yast_inf_finish.rb:73 +#. TRANSLATORS: busy message +#. progress step title +#: src/include/installation/inst_inc_all.rb:112 +#: src/lib/installation/clients/yast_inf_finish.rb:73 msgid "Writing YaST configuration..." msgstr "YaST 구성을 작성하는 중입니다." -#. TRANSLATORS: busy message -#. Dialog busy message -#: src/include/installation/inst_inc_all.rb:126 -#: src/lib/installation/clients/inst_congratulate.rb:267 +#. TRANSLATORS: busy message +#. Dialog busy message +#: src/include/installation/inst_inc_all.rb:126 +#: src/lib/installation/clients/inst_congratulate.rb:267 msgid "Finishing the installation..." msgstr "설치 완료 중" -#. Somehow the graphical frontend failed and we're running in -#. text mode. Inform the user about this fact. -#: src/include/installation/inst_inc_all.rb:174 +#. Somehow the graphical frontend failed and we're running in +#. text mode. Inform the user about this fact. +#: src/include/installation/inst_inc_all.rb:174 msgid "" "Your computer does not fulfill all requirements for\n" "a graphical installation. There is either less than %1 MB\n" @@ -83,12 +83,12 @@ "그래픽과 동일한 기능을 제공하지만 화면이\n" "매뉴얼의 화면과 다릅니다.\n" -#. The script YaST2 wants to inform about a problem with the -#. option no_x11 but it's broken. -#. else if (Installation::no_x11 ()) -#. Somehow the graphical frontend failed and we're running in -#. text mode. Inform the user about this fact. -#: src/include/installation/inst_inc_all.rb:193 +#. The script YaST2 wants to inform about a problem with the +#. option no_x11 but it's broken. +#. else if (Installation::no_x11 ()) +#. Somehow the graphical frontend failed and we're running in +#. text mode. Inform the user about this fact. +#: src/include/installation/inst_inc_all.rb:193 msgid "" "The graphical interface could not be started.\n" "\n" @@ -110,30 +110,30 @@ "그래픽과 동일한 기능을 제공하지만 화면이\n" "매뉴얼의 화면과 다릅니다.\n" -#. TRANSLATORS: progress stage, %1 stands for service name -#: src/include/installation/inst_inc_second.rb:275 +#. TRANSLATORS: progress stage, %1 stands for service name +#: src/include/installation/inst_inc_second.rb:275 msgid "Start service %1" msgstr "%1 서비스 시작" -#. TRANSLATORS: progress stage, %1 stands for service name -#. TRANSLATORS: busy message -#: src/include/installation/inst_inc_second.rb:280 -#: src/lib/installation/clients/inst_restore_settings.rb:47 +#. TRANSLATORS: progress stage, %1 stands for service name +#. TRANSLATORS: busy message +#: src/include/installation/inst_inc_second.rb:280 +#: src/lib/installation/clients/inst_restore_settings.rb:47 msgid "Starting service %1..." msgstr "%1 서비스 시작 중..." -#. TRANSLATORS: dialog caption -#: src/include/installation/inst_inc_second.rb:295 +#. TRANSLATORS: dialog caption +#: src/include/installation/inst_inc_second.rb:295 msgid "Adjusting Network Settings" msgstr "네트워크 설정 조정 중" -#. TRANSLATORS: dialog help -#: src/include/installation/inst_inc_second.rb:301 +#. TRANSLATORS: dialog help +#: src/include/installation/inst_inc_second.rb:301 msgid "Network settings are being adjusted." msgstr "네트워크 설정을 조정 중입니다." -#. popup question (#x1) -#: src/include/installation/inst_inc_second.rb:354 +#. popup question (#x1) +#: src/include/installation/inst_inc_second.rb:354 msgid "" "The previous installation has failed.\n" "Would you like it to continue?\n" @@ -145,8 +145,8 @@ " \n" "참고: 몇 가지 정보를 다시 입력해야 합니다." -#. popup question (#x1) -#: src/include/installation/inst_inc_second.rb:362 +#. popup question (#x1) +#: src/include/installation/inst_inc_second.rb:362 msgid "" "The previous installation has been aborted.\n" "Would you like it to continue?\n" @@ -158,26 +158,26 @@ " \n" "참고: 일부 정보를 다시 입력해야 할 수도 있습니다." -#. popup headline (#x1) -#. TRANSLATORS: starting the installation process -#. dialog cotent (progress information) -#: src/include/installation/inst_inc_second.rb:376 -#: src/lib/installation/clients/inst_doit.rb:60 +#. popup headline (#x1) +#. TRANSLATORS: starting the installation process +#. dialog cotent (progress information) +#: src/include/installation/inst_inc_second.rb:376 +#: src/lib/installation/clients/inst_doit.rb:60 msgid "Starting Installation..." msgstr "설치 시작 중..." -#. Heading for confirmation popup before the installation really starts -#: src/include/installation/misc.rb:167 +#. Heading for confirmation popup before the installation really starts +#: src/include/installation/misc.rb:167 msgid "Confirm Installation" msgstr "설치 확인" -#. Text for confirmation popup before the installation really starts 1/3 -#: src/include/installation/misc.rb:170 +#. Text for confirmation popup before the installation really starts 1/3 +#: src/include/installation/misc.rb:170 msgid "<p>Information required for the base installation is now complete.</p>" msgstr "<p>기본 설치에 필요한 정보가 이제 완료되었습니다.</p>" -#. Text for confirmation popup before the installation really starts 2/3 -#: src/include/installation/misc.rb:182 +#. Text for confirmation popup before the installation really starts 2/3 +#: src/include/installation/misc.rb:182 msgid "" "<p>If you continue now, <b>existing\n" "partitions</b> on your hard disk will be <b>deleted</b> or <b>formatted</b>\n" @@ -189,8 +189,8 @@ "<b>포맷</b>되어 파티션의 <b>기존 데이터가\n" "모두 지워집니다</b>.</p>" -#. Text for confirmation popup before the installation really starts 2/3 -#: src/include/installation/misc.rb:193 +#. Text for confirmation popup before the installation really starts 2/3 +#: src/include/installation/misc.rb:193 msgid "" "<p>If you continue now, partitions on your\n" "hard disk will be modified according to the installation settings in the\n" @@ -200,32 +200,32 @@ "설치 설정에 따라 하드 디스크의\n" " 파티션이 수정됩니다.</p>" -#. Text for confirmation popup before the installation really starts 3/3 -#. Text for confirmation popup before the update really starts 3/3 -#. Text for confirmation popup before the update really starts 3/3 -#: src/include/installation/misc.rb:204 src/include/installation/misc.rb:222 -#: src/lib/installation/proposal_runner.rb:141 +#. Text for confirmation popup before the installation really starts 3/3 +#. Text for confirmation popup before the update really starts 3/3 +#. Text for confirmation popup before the update really starts 3/3 +#: src/include/installation/misc.rb:204 src/include/installation/misc.rb:222 +#: src/lib/installation/proposal_runner.rb:141 msgid "<p>Go back and check the settings if you are unsure.</p>" msgstr "<p>불확실한 내용이 있으면 이전으로 돌아가 설정을 확인하십시오.</p>" -#. Heading for confirmation popup before the update really starts -#. Heading for confirmation popup before the update really starts -#: src/include/installation/misc.rb:210 -#: src/lib/installation/proposal_runner.rb:129 +#. Heading for confirmation popup before the update really starts +#. Heading for confirmation popup before the update really starts +#: src/include/installation/misc.rb:210 +#: src/lib/installation/proposal_runner.rb:129 msgid "Confirm Update" msgstr "업데이트 확인" -#. Text for confirmation popup before the update really starts 1/3 -#. Text for confirmation popup before the update really starts 1/3 -#: src/include/installation/misc.rb:214 -#: src/lib/installation/proposal_runner.rb:133 +#. Text for confirmation popup before the update really starts 1/3 +#. Text for confirmation popup before the update really starts 1/3 +#: src/include/installation/misc.rb:214 +#: src/lib/installation/proposal_runner.rb:133 msgid "<p>Information required to perform an update is now complete.</p>" msgstr "<p>업데이트를 수행하는 데 필요한 정보가 이제 완료되었습니다.</p>" -#. Text for confirmation popup before the update really starts 2/3 -#. Text for confirmation popup before the update really starts 2/3 -#: src/include/installation/misc.rb:216 -#: src/lib/installation/proposal_runner.rb:135 +#. Text for confirmation popup before the update really starts 2/3 +#. Text for confirmation popup before the update really starts 2/3 +#: src/include/installation/misc.rb:216 +#: src/lib/installation/proposal_runner.rb:135 msgid "" "\n" "<p>If you continue now, data on your hard disk will be overwritten\n" @@ -235,141 +235,126 @@ "<p>지금 계속하면 이전 대화 상자의 설정에 따라\n" "하드 디스크의 데이터를 덮어쓰게 됩니다.</p>" -#. Label for the button that confirms startint the installation -#. Label for the button that confirms startint the installation -#: src/include/installation/misc.rb:225 -#: src/lib/installation/proposal_runner.rb:144 +#. Label for the button that confirms startint the installation +#. Label for the button that confirms startint the installation +#: src/include/installation/misc.rb:225 +#: src/lib/installation/proposal_runner.rb:144 msgid "Start &Update" msgstr "업데이트 시작(&U)" -#. this is a heading -#: src/lib/installation/cio_ignore.rb:66 +#. this is a heading +#: src/lib/installation/cio_ignore.rb:66 msgid "Blacklist Devices" msgstr "장치 블랙리스트 작성" -#. this is a menu entry -#: src/lib/installation/cio_ignore.rb:68 +#. this is a menu entry +#: src/lib/installation/cio_ignore.rb:68 msgid "B&lacklist Devices" msgstr "장치 블랙리스트 작성(&L)" -#. TRANSLATORS: Installation overview -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: src/lib/installation/cio_ignore.rb:87 +#. TRANSLATORS: Installation overview +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: src/lib/installation/cio_ignore.rb:87 msgid "Blacklist devices enabled (disable</a>)." msgstr "장치 블랙리스트 작성이 활성화됩니다(비활성화</a>)." -#. TRANSLATORS: Installation overview -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: src/lib/installation/cio_ignore.rb:93 +#. TRANSLATORS: Installation overview +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: src/lib/installation/cio_ignore.rb:93 msgid "Blacklist devices disabled (enable</a>)." msgstr "장치 블랙리스트 작성이 비활성화됩니다(활성화</a>)." -#. TRANSLATORS: help text -#: src/lib/installation/cio_ignore.rb:102 -msgid "" -"<p>Use <b>Blacklist devices</b> if you want to create blacklist channels to " -"such devices which will reduce kernel memory footprint.</p>" -msgstr "" -"<p>장치에 대한 블랙리스트 채널을 작성하여 커널 메모리 사용량을 줄이려는 경우 " -"<b>장치 블랙리스트 작성</b>을 사용하십시오.</p>" +#. TRANSLATORS: help text +#: src/lib/installation/cio_ignore.rb:102 +msgid "<p>Use <b>Blacklist devices</b> if you want to create blacklist channels to such devices which will reduce kernel memory footprint.</p>" +msgstr "<p>장치에 대한 블랙리스트 채널을 작성하여 커널 메모리 사용량을 줄이려는 경우 <b>장치 블랙리스트 작성</b>을 사용하십시오.</p>" -#. progress step title -#: src/lib/installation/cio_ignore.rb:157 +#. progress step title +#: src/lib/installation/cio_ignore.rb:157 msgid "Blacklisting Devices..." msgstr "장치 블랙리스트 작성 중..." -#. progress step title -#: src/lib/installation/clients/copy_files_finish.rb:83 +#. progress step title +#: src/lib/installation/clients/copy_files_finish.rb:83 msgid "Copying files to installed system..." msgstr "설치된 시스템으로 파일 복사 중..." -#. progress step title -#: src/lib/installation/clients/copy_systemfiles_finish.rb:60 +#. progress step title +#: src/lib/installation/clients/copy_systemfiles_finish.rb:60 msgid "Copying system files to the installed system..." msgstr "설치된 시스템으로 시스템 파일 복사 중..." -#. Create a summary -#. return string -#: src/lib/installation/clients/deploy_image_auto.rb:90 +#. Create a summary +#. return string +#: src/lib/installation/clients/deploy_image_auto.rb:90 msgid "Installation from images is: <b>enabled</b>" msgstr "이미지에서 설치: <b>활성화됨</b>" -#: src/lib/installation/clients/deploy_image_auto.rb:92 +#: src/lib/installation/clients/deploy_image_auto.rb:92 msgid "Installation from images is: <b>disabled</b>" msgstr "이미지에서 설치: <b>비활성화됨</b>" -#. TRANSLATORS: dialog caption -#. this is a heading -#: src/lib/installation/clients/deploy_image_auto.rb:113 -#: src/lib/installation/clients/deploy_image_auto.rb:118 -#: src/lib/installation/clients/deploying_proposal.rb:133 +#. TRANSLATORS: dialog caption +#. this is a heading +#: src/lib/installation/clients/deploy_image_auto.rb:113 +#: src/lib/installation/clients/deploy_image_auto.rb:118 +#: src/lib/installation/clients/deploying_proposal.rb:133 msgid "Installation from Images" msgstr "이미지에서 설치" -#: src/lib/installation/clients/deploy_image_auto.rb:121 -msgid "" -"Here you can choose to use Novell pre-defined images to speed up RPM " -"installation." -msgstr "" -"이곳에서 사용할 Novell이 정한 빠른 속도의 RPM 설치 이미지를 선택할 수 있습니" -"다." +#: src/lib/installation/clients/deploy_image_auto.rb:121 +msgid "Here you can choose to use Novell pre-defined images to speed up RPM installation." +msgstr "이곳에서 사용할 Novell이 정한 빠른 속도의 RPM 설치 이미지를 선택할 수 있습니다." -#: src/lib/installation/clients/deploy_image_auto.rb:135 +#: src/lib/installation/clients/deploy_image_auto.rb:135 msgid "&Install from Images" msgstr "이미지에서 설치(&I)" -#: src/lib/installation/clients/deploy_image_auto.rb:144 +#: src/lib/installation/clients/deploy_image_auto.rb:144 msgid "&Do not Install from Images" msgstr "이미지에서 설치 안 함(&D)" -#: src/lib/installation/clients/deploy_image_auto.rb:155 -msgid "" -"Custom images deployment - this needs a URL to be configured as installation " -"source" +#: src/lib/installation/clients/deploy_image_auto.rb:155 +msgid "Custom images deployment - this needs a URL to be configured as installation source" msgstr "사용자 정의 이미지 배치 - 이것은 설치 소스를 지정할 URL이 필요합니다." -#. Image name, Image location -#: src/lib/installation/clients/deploy_image_auto.rb:164 +#. Image name, Image location +#: src/lib/installation/clients/deploy_image_auto.rb:164 msgid "Here you can create custom images.\n" msgstr "이곳에서 사용자 정의 이미지를 만들 수 있습니다.\n" -#: src/lib/installation/clients/deploy_image_auto.rb:165 -msgid "" -"You have to configure the software selection first before you can create an " -"image here" +#: src/lib/installation/clients/deploy_image_auto.rb:165 +msgid "You have to configure the software selection first before you can create an image here" msgstr "여기에서 이미지를 만들기 전에 소프트웨어 선택 설정을 먼저 해야 합니다." -#: src/lib/installation/clients/deploy_image_auto.rb:176 -msgid "" -"Create an image file (AutoYaST will fetch it from the given location during " -"installation)" +#: src/lib/installation/clients/deploy_image_auto.rb:176 +msgid "Create an image file (AutoYaST will fetch it from the given location during installation)" msgstr "이미지 파일 만들기(AutoYaST는 설치 도중 주어진 위치로부터 가져옵니다.)" -#: src/lib/installation/clients/deploy_image_auto.rb:183 +#: src/lib/installation/clients/deploy_image_auto.rb:183 msgid "Create Image" msgstr "이미지 만들기" -#: src/lib/installation/clients/deploy_image_auto.rb:188 +#: src/lib/installation/clients/deploy_image_auto.rb:188 msgid "Where will AutoYaST find the image? (e.g. http://host/)" msgstr "AutoYaST가 찾을 이미지의 위치가 어디입니까(예: http://host/)?" -#: src/lib/installation/clients/deploy_image_auto.rb:200 +#: src/lib/installation/clients/deploy_image_auto.rb:200 msgid "What is the name of the image? (e.g. my_image)" msgstr "이미지의 이름이 무엇입니까(예: my_image)?" -#: src/lib/installation/clients/deploy_image_auto.rb:213 +#: src/lib/installation/clients/deploy_image_auto.rb:213 msgid "Create ISO (image and autoinst.xml will be on the media)" msgstr "ISO 만들기(이미지와 자동설치 xml이 미디어 안에 들어감)" -#. TRANSLATORS: help text -#. TRANSLATORS: help text -#: src/lib/installation/clients/deploy_image_auto.rb:229 -#: src/lib/installation/clients/deploying_proposal.rb:69 +#. TRANSLATORS: help text +#. TRANSLATORS: help text +#: src/lib/installation/clients/deploy_image_auto.rb:229 +#: src/lib/installation/clients/deploying_proposal.rb:69 msgid "" "<p><b>Installation from Images</b> is used to speed the installation up.\n" "Images contain compressed snapshots of an installed system matching your\n" -"selection of patterns. The rest of the packages which are not contained in " -"the\n" +"selection of patterns. The rest of the packages which are not contained in the\n" "images will be installed from packages the standard way.</p>\n" msgstr "" "<p><b>이미지에서 설치</b>는 설치 과정을 단축하는 데 사용됩니다.\n" @@ -377,40 +362,34 @@ "포함되어 있습니다. 이미지에 포함되지 않은 나머지 패키지는\n" "표준 방법으로 패키지에서 설치됩니다.</p>\n" -#: src/lib/installation/clients/deploy_image_auto.rb:235 +#: src/lib/installation/clients/deploy_image_auto.rb:235 msgid "" "<p><b>Creating own Images</b> is used if you\n" -"want to skip the complete step of RPM installation. Instead AutoYaST will " -"dump an\n" -"image on the harddisk which is a lot faster and can be pre-configured " -"already.\n" -"Everything else than RPM installation is done like during a normal auto-" -"installation.</p>" +"want to skip the complete step of RPM installation. Instead AutoYaST will dump an\n" +"image on the harddisk which is a lot faster and can be pre-configured already.\n" +"Everything else than RPM installation is done like during a normal auto-installation.</p>" msgstr "" "<p><b>고유한 이미지 생성</b>은\n" -"RPM 설치의 전체 단계를 건너뛰려는 경우에 사용됩니다. 대신 AutoYaST는 하드 디" -"스크에\n" +"RPM 설치의 전체 단계를 건너뛰려는 경우에 사용됩니다. 대신 AutoYaST는 하드 디스크에\n" "이미지를 덤프하는데, 훨씬 더 빠르고 미리 구성할 수 있습니다.\n" "RPM 설치 이외의 모든 작업은 정상적인 자동 설치처럼 수행됩니다.</p>" -#: src/lib/installation/clients/deploy_image_auto.rb:338 -#: src/lib/installation/clients/deploy_image_auto.rb:349 +#: src/lib/installation/clients/deploy_image_auto.rb:338 +#: src/lib/installation/clients/deploy_image_auto.rb:349 msgid "you need to do the software selection before creating an image" msgstr "이미지를 만들기 전에 소프트웨어 선택을 할 필요가 있습니다." -#. TRANSLATORS: help text -#: src/lib/installation/clients/deploying_proposal.rb:76 +#. TRANSLATORS: help text +#: src/lib/installation/clients/deploying_proposal.rb:76 msgid "" -"<p>Note that when installing from images, the time stamps of all packages " -"originating from the images will\n" -"not match the installation date but rather the date the image was created." +"<p>Note that when installing from images, the time stamps of all packages originating from the images will\n" +"not match the installation date but rather the date the image was created.</p>" msgstr "" "<p>이미지에서 설치하는 경우 이미지에서 시작되는 모든 패키지의 타임스탬프는\n" "설치 이미지와 일치하지 않고 이미지가 생성된 날짜와 일치합니다.</p>" -#. TRANSLATORS: help text -#: src/lib/installation/clients/deploying_proposal.rb:80 +#. TRANSLATORS: help text +#: src/lib/installation/clients/deploying_proposal.rb:80 msgid "" "<p>Installation from images is disabled by default if the current\n" "pattern selection does not fit any set of images.</p>" @@ -418,12 +397,12 @@ "<p>현재 선택한 패턴이 이미지 내용에 맞지 않는 경우\n" "이미지에서 설치는 기본적으로 비활성화됩니다.</p>" -#: src/lib/installation/clients/deploying_proposal.rb:90 +#: src/lib/installation/clients/deploying_proposal.rb:90 msgid "Error: Images should not be used for mode: %1." msgstr "오류: %1 모드에는 이미지를 사용하면 안 됩니다." -#. changed to true -#: src/lib/installation/clients/deploying_proposal.rb:119 +#. changed to true +#: src/lib/installation/clients/deploying_proposal.rb:119 msgid "" "Cannot enable installation from images.\n" "\n" @@ -435,46 +414,46 @@ "현재 선택한 패턴은 설치 미디어에 저장된\n" "이미지와 맞지 않습니다.\n" -#. this is a menu entry -#: src/lib/installation/clients/deploying_proposal.rb:135 +#. this is a menu entry +#: src/lib/installation/clients/deploying_proposal.rb:135 msgid "Installation from &Images" msgstr "이미지에서 설치(&I)" -#. TRANSLATORS: Installation overview -#: src/lib/installation/clients/deploying_proposal.rb:155 +#. TRANSLATORS: Installation overview +#: src/lib/installation/clients/deploying_proposal.rb:155 msgid "No installation images are available" msgstr "사용할 수 있는 설치 이미지가 없음" -#. TRANSLATORS: Installation overview -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: src/lib/installation/clients/deploying_proposal.rb:166 +#. TRANSLATORS: Installation overview +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: src/lib/installation/clients/deploying_proposal.rb:166 msgid "Installation from images is enabled (disable</a>)." msgstr "이미지에서 설치가 활성화되었습니다(비활성화</a>)." -#. TRANSLATORS: Installation overview -#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text -#: src/lib/installation/clients/deploying_proposal.rb:181 +#. TRANSLATORS: Installation overview +#. IMPORTANT: Please, do not change the HTML link <a href="...">...</a>, only visible text +#: src/lib/installation/clients/deploying_proposal.rb:181 msgid "Installation from images is disabled (enable</a>)." msgstr "이미지에서 설치가 비활성화되었습니다(활성화</a>)." -#. progress step title -#: src/lib/installation/clients/desktop_finish.rb:70 +#. progress step title +#: src/lib/installation/clients/desktop_finish.rb:70 msgid "Initializing default window manager..." msgstr "기본 창 관리자 초기화 중..." -#. feedback heading -#: src/lib/installation/clients/inst_addon_update_sources.rb:51 +#. feedback heading +#: src/lib/installation/clients/inst_addon_update_sources.rb:51 msgid "Add-on Product Installation" msgstr "추가 기능 제품 설치" -#. feedback message -#: src/lib/installation/clients/inst_addon_update_sources.rb:53 +#. feedback message +#: src/lib/installation/clients/inst_addon_update_sources.rb:53 msgid "Reading packages available in the repositories..." msgstr "리포지토리에 사용 가능한 패키지를 읽는 중..." -#. popup error message -#. %1 represents the the error message details -#: src/lib/installation/clients/inst_addon_update_sources.rb:109 +#. popup error message +#. %1 represents the the error message details +#: src/lib/installation/clients/inst_addon_update_sources.rb:109 msgid "" "An error occurred while connecting to the server.\n" "Details: %1\n" @@ -486,35 +465,35 @@ " \n" " 다시 시도하시겠습니까?" -#. bnc #542792 -#. Repository name must be generated from product details -#: src/lib/installation/clients/inst_addon_update_sources.rb:165 +#. bnc #542792 +#. Repository name must be generated from product details +#: src/lib/installation/clients/inst_addon_update_sources.rb:165 msgid "Updates for %1 %2" msgstr "%1 %2 업데이트" -#: src/lib/installation/clients/inst_addon_update_sources.rb:172 -#: src/lib/installation/clients/inst_system_analysis.rb:296 +#: src/lib/installation/clients/inst_addon_update_sources.rb:172 +#: src/lib/installation/clients/inst_system_analysis.rb:296 msgid "Unknown Product" msgstr "알 수 없는 제품" -#. strings for "ask for online update"-popup -#: src/lib/installation/clients/inst_ask_online_update.rb:70 +#. strings for "ask for online update"-popup +#: src/lib/installation/clients/inst_ask_online_update.rb:70 msgid "Run Update" msgstr "업데이트 실행" -#: src/lib/installation/clients/inst_ask_online_update.rb:71 +#: src/lib/installation/clients/inst_ask_online_update.rb:71 msgid "Skip Update" msgstr "업데이트 건너뛰기" -#: src/lib/installation/clients/inst_ask_online_update.rb:73 +#: src/lib/installation/clients/inst_ask_online_update.rb:73 msgid "Online Update" msgstr "온라인 업데이트" -#: src/lib/installation/clients/inst_ask_online_update.rb:74 +#: src/lib/installation/clients/inst_ask_online_update.rb:74 msgid "Run Online Update now?" msgstr "지금 온라인 업데이트를 실행하시겠습니까?" -#: src/lib/installation/clients/inst_ask_online_update.rb:76 +#: src/lib/installation/clients/inst_ask_online_update.rb:76 msgid "" "Select whether to run an online update now.\n" "You may skip this step and run an online update later.\n" @@ -522,24 +501,24 @@ "지금 온라인 업데이트를 실행할지를 선택하십시오.\n" "이 단계를 건너뛰고 나중에 온라인 업데이트를 실행할 수도 있습니다.\n" -#. This client shows main dialog for choosing the language, -#. keyboard and accepting the license. -#: src/lib/installation/clients/inst_complex_welcome.rb:33 +#. This client shows main dialog for choosing the language, +#. keyboard and accepting the license. +#: src/lib/installation/clients/inst_complex_welcome.rb:33 msgid "Language, Keyboard and License Agreement" msgstr "언어, 키보드 및 사용권 계약" -#. In case of going back, Release Notes button may be shown, retranslate it (bnc#886660) -#. Assure that relnotes have been downloaded first -#. download release notes now -#. push button -#: src/lib/installation/clients/inst_complex_welcome.rb:178 -#: src/lib/installation/clients/inst_download_release_notes.rb:137 -#: src/lib/installation/clients/inst_system_analysis.rb:294 +#. In case of going back, Release Notes button may be shown, retranslate it (bnc#886660) +#. Assure that relnotes have been downloaded first +#. download release notes now +#. push button +#: src/lib/installation/clients/inst_complex_welcome.rb:178 +#: src/lib/installation/clients/inst_download_release_notes.rb:137 +#: src/lib/installation/clients/inst_system_analysis.rb:294 msgid "Re&lease Notes..." msgstr "릴리스 정보(&L)..." -#. help text for initial (first time) language screen -#: src/lib/installation/clients/inst_complex_welcome.rb:192 +#. help text for initial (first time) language screen +#: src/lib/installation/clients/inst_complex_welcome.rb:192 msgid "" "<p>\n" "Choose the <b>Language</b> and the <b>Keyboard layout</b> to be used during\n" @@ -551,24 +530,22 @@ "<b>키보드 배열</b>을 선택합니다.\n" "</p>\n" -#. help text, continued -#. Describes the #ICW_B1 button -#: src/lib/installation/clients/inst_complex_welcome.rb:200 +#. help text, continued +#. Describes the #ICW_B1 button +#: src/lib/installation/clients/inst_complex_welcome.rb:200 msgid "" "<p>\n" "The license must be accepted before the installation continues.\n" -"Use <b>License Translations...</b> to show the license in all available " -"translations.\n" +"Use <b>License Translations...</b> to show the license in all available translations.\n" "</p>\n" msgstr "" "<p>\n" "설치가 계속되려면 라이센스에 동의해야 합니다.\n" -"<b>사용권 번역...</b>을 사용하여 사용 가능한 모든 번역으로 라이센스를 표시하" -"십시오.\n" +"<b>사용권 번역...</b>을 사용하여 사용 가능한 모든 번역으로 라이센스를 표시하십시오.\n" "</p>\n" -#. help text, continued -#: src/lib/installation/clients/inst_complex_welcome.rb:207 +#. help text, continued +#: src/lib/installation/clients/inst_complex_welcome.rb:207 msgid "" "<p>\n" "Click <b>Next</b> to proceed to the next dialog.\n" @@ -578,8 +555,8 @@ "다음 대화 상자로 진행하려면 <b>다음</b>을 클릭합니다.\n" " </p>\n" -#. help text, continued -#: src/lib/installation/clients/inst_complex_welcome.rb:213 +#. help text, continued +#: src/lib/installation/clients/inst_complex_welcome.rb:213 msgid "" "<p>\n" "Nothing will happen to your computer until you confirm\n" @@ -591,8 +568,8 @@ "컴퓨터에서 아무 것도 변경되지 않습니다.\n" " </p>\n" -#. help text, continued -#: src/lib/installation/clients/inst_complex_welcome.rb:220 +#. help text, continued +#: src/lib/installation/clients/inst_complex_welcome.rb:220 msgid "" "<p>\n" "Select <b>Abort</b> to abort the\n" @@ -604,60 +581,60 @@ "<b>중단</b>을 선택합니다.\n" "</p>\n" -#. TRANSLATORS: dialog caption -#: src/lib/installation/clients/inst_complex_welcome.rb:236 -#: src/lib/installation/clients/inst_complex_welcome.rb:434 +#. TRANSLATORS: dialog caption +#: src/lib/installation/clients/inst_complex_welcome.rb:236 +#: src/lib/installation/clients/inst_complex_welcome.rb:434 msgid "License Agreement" msgstr "사용권 계약" -#. combo box label -#. combobox -#. TRANSLATORS: Combo box -#: src/lib/installation/clients/inst_complex_welcome.rb:260 -#: src/lib/installation/clients/inst_release_notes.rb:217 -#: src/lib/installation/clients/inst_release_notes.rb:429 +#. combo box label +#. combobox +#. TRANSLATORS: Combo box +#: src/lib/installation/clients/inst_complex_welcome.rb:260 +#: src/lib/installation/clients/inst_release_notes.rb:217 +#: src/lib/installation/clients/inst_release_notes.rb:429 msgid "&Language" msgstr "언어(&L)" -#. combo box label -#: src/lib/installation/clients/inst_complex_welcome.rb:270 +#. combo box label +#: src/lib/installation/clients/inst_complex_welcome.rb:270 msgid "&Keyboard Layout" msgstr "키보드 배열(&K)" -#. TRANSLATORS: check-box -#: src/lib/installation/clients/inst_complex_welcome.rb:284 +#. TRANSLATORS: check-box +#: src/lib/installation/clients/inst_complex_welcome.rb:284 msgid "I &Agree to the License Terms." msgstr "동의함(&A)" -#. Report error about missing license acceptance -#: src/lib/installation/clients/inst_complex_welcome.rb:311 +#. Report error about missing license acceptance +#: src/lib/installation/clients/inst_complex_welcome.rb:311 msgid "You must accept the license to install this product" msgstr "이 제품을 설치하려면 라이센스에 동의해야 합니다." -#. TRANSLATORS: addition license information -#. %1 is replaced with the filename. Please keep -#. the translation VERY short. -#: src/lib/installation/clients/inst_complex_welcome.rb:402 +#. TRANSLATORS: addition license information +#. %1 is replaced with the filename. Please keep +#. the translation VERY short. +#: src/lib/installation/clients/inst_complex_welcome.rb:402 msgid "EULA location in the installed system: %s" msgstr "설치된 시스템에서 EULA 위치: %s" -#. this type of contents will be shown only for initial installation dialog -#: src/lib/installation/clients/inst_complex_welcome.rb:425 +#. this type of contents will be shown only for initial installation dialog +#: src/lib/installation/clients/inst_complex_welcome.rb:425 msgid "K&eyboard Test" msgstr "키보드 테스트(&E)" -#. TRANSLATORS: button label -#: src/lib/installation/clients/inst_complex_welcome.rb:459 +#. TRANSLATORS: button label +#: src/lib/installation/clients/inst_complex_welcome.rb:459 msgid "License &Translations..." msgstr "사용권 번역(&T)..." -#. TRANSLATORS: check box, see #ZMD -#: src/lib/installation/clients/inst_congratulate.rb:107 +#. TRANSLATORS: check box, see #ZMD +#: src/lib/installation/clients/inst_congratulate.rb:107 msgid "&Disable ZMD Service" msgstr "ZMD 서비스 비활성화(&D)" -#. TRANSLATORS: help text, see #ZMD -#: src/lib/installation/clients/inst_congratulate.rb:114 +#. TRANSLATORS: help text, see #ZMD +#: src/lib/installation/clients/inst_congratulate.rb:114 msgid "" "<p>Select <b>Disable ZMD Service</b> to stop and disable\n" "the ZMD service during system start.</p>\n" @@ -665,24 +642,24 @@ "<p><b>ZMD 서비스 비활성화</b>를 선택하여 시스템 시작 중\n" "ZMD 서비스를 중지 및 비활성화하십시오.</p>\n" -#. Check box: start the clone process and store the AutoYaST -#. profile in /root/autoinst.xml -#: src/lib/installation/clients/inst_congratulate.rb:149 +#. Check box: start the clone process and store the AutoYaST +#. profile in /root/autoinst.xml +#: src/lib/installation/clients/inst_congratulate.rb:149 msgid "&Clone This System for AutoYaST" msgstr "Autoyast용으로 이 시스템 복제(&C)" -#. caption for dialog "Congratulation Dialog" -#: src/lib/installation/clients/inst_congratulate.rb:155 +#. caption for dialog "Congratulation Dialog" +#: src/lib/installation/clients/inst_congratulate.rb:155 msgid "Installation Completed" msgstr "설치 완료" -#. congratulation text 1/4 -#: src/lib/installation/clients/inst_congratulate.rb:163 +#. congratulation text 1/4 +#: src/lib/installation/clients/inst_congratulate.rb:163 msgid "<p><b>Congratulations!</b></p>" msgstr "축하합니다!" -#. congratulation text 2/4 -#: src/lib/installation/clients/inst_congratulate.rb:165 +#. congratulation text 2/4 +#: src/lib/installation/clients/inst_congratulate.rb:165 msgid "" "<p>The installation of &product; on your machine is complete.\n" "After clicking <b>Finish</b>, you can log in to the system.</p>\n" @@ -690,23 +667,23 @@ "<p>제품(&p)의 설치; 여러분의 컴퓨터상에 완벽합니다.\n" "<b>마침</b> 클릭한후에, 여러분은 그 시스템으로 로그인 합니다.</p>\n" -#. congratulation text 3/4 -#: src/lib/installation/clients/inst_congratulate.rb:169 +#. congratulation text 3/4 +#: src/lib/installation/clients/inst_congratulate.rb:169 msgid "<p>Visit us at %1.</p>" msgstr "<p>%1(을)를 방문하여 주십시오.</p>" -#. congratulation text 4/4 -#: src/lib/installation/clients/inst_congratulate.rb:172 +#. congratulation text 4/4 +#: src/lib/installation/clients/inst_congratulate.rb:172 msgid "<p>Have a lot of fun!<br>Your SUSE Development Team</p>" msgstr "<p>즐거운 시간을 보내시기 바랍니다!<br>SUSE 개발팀</p>" -#. help 1/4 for dialog "Congratulation Dialog" -#: src/lib/installation/clients/inst_congratulate.rb:196 +#. help 1/4 for dialog "Congratulation Dialog" +#: src/lib/installation/clients/inst_congratulate.rb:196 msgid "<p>Your system is ready for use.</p>" msgstr "당신의 시스템이 사용할 준비가 되었습니다." -#. help 2/4 for dialog "Congratulation Dialog" -#: src/lib/installation/clients/inst_congratulate.rb:198 +#. help 2/4 for dialog "Congratulation Dialog" +#: src/lib/installation/clients/inst_congratulate.rb:198 msgid "" "<p><b>Finish</b> will close the YaST installation and take you\n" "to the login screen.</p>\n" @@ -714,8 +691,8 @@ "<p><b>완료</b>는 YaST 설치를 닫고\n" "로그인 화면으로 이동합니다.</p>\n" -#. help 3/4 for dialog "Congratulation Dialog" -#: src/lib/installation/clients/inst_congratulate.rb:203 +#. help 3/4 for dialog "Congratulation Dialog" +#: src/lib/installation/clients/inst_congratulate.rb:203 msgid "" "<p>If you choose the default graphical desktop KDE, you can\n" "adjust some KDE settings to your hardware. Also notice\n" @@ -725,59 +702,53 @@ "하드웨어에 대한 일부 KDE 설정을 조정할 수 있습니다. SUSE 환영\n" " 대화 상자도 확인하여 주십시오.</p>\n" -#. Show this help only in case of KDE as the default windowmanager -#: src/lib/installation/clients/inst_congratulate.rb:215 +#. Show this help only in case of KDE as the default windowmanager +#: src/lib/installation/clients/inst_congratulate.rb:215 msgid "" "<p>Use <b>Clone</b> if you want to create an AutoYaST profile.\n" -"AutoYaST is a way to do a complete SUSE Linux installation without user " -"interaction. AutoYaST\n" -"needs a profile to know what the installed system should look like. If this " -"option is\n" -"selected, a profile of the current system is stored in <tt>/root/autoinst." -"xml</tt>.</p>" +"AutoYaST is a way to do a complete SUSE Linux installation without user interaction. AutoYaST\n" +"needs a profile to know what the installed system should look like. If this option is\n" +"selected, a profile of the current system is stored in <tt>/root/autoinst.xml</tt>.</p>" msgstr "" "<p>AutoYaST 프로파일을 생성하려면 <b>복제</b>를 사용합니다.\n" -"AutoYaST를 사용하면 사용자의 작업 없이 SUSE Linux 설치를 완료할 수 있습니" -"다.\n" +"AutoYaST를 사용하면 사용자의 작업 없이 SUSE Linux 설치를 완료할 수 있습니다.\n" "AutoYaST에는 설치된 시스템 상태를 파악하기 위해 프로파일이 필요합니다.\n" -"이 옵션을 선택하면 현재 시스템의 프로파일이 <tt>/root/autoyast.xml</tt>에 저" -"장됩니다.</p>" +"이 옵션을 선택하면 현재 시스템의 프로파일이 <tt>/root/autoyast.xml</tt>에 저장됩니다.</p>" -#. #187558 -#. Load Add-On products configured in the fist stage -#: src/lib/installation/clients/inst_congratulate.rb:310 -msgid "" -"<p>To clone the current system, the <b>%1</b> package must be installed.</p>" +#. #187558 +#. Load Add-On products configured in the fist stage +#: src/lib/installation/clients/inst_congratulate.rb:310 +msgid "<p>To clone the current system, the <b>%1</b> package must be installed.</p>" msgstr "<p>시스템 복제를 하려면 <b>%1</b> 패키지가 설치되어 있어야 합니다.</p>" -#: src/lib/installation/clients/inst_congratulate.rb:313 +#: src/lib/installation/clients/inst_congratulate.rb:313 msgid "<p>Install it now?</p>" msgstr "<p>지금 설치하시겠습니까?</p>" -#: src/lib/installation/clients/inst_congratulate.rb:315 +#: src/lib/installation/clients/inst_congratulate.rb:315 msgid "autoyast2 package not installed. Cloning disabled." msgstr "autoyast2 패키지가 설치되지 않았습니다. 복제가 비활성화됩니다." -#. OEM image if target disk is defined -#: src/lib/installation/clients/inst_deploy_image.rb:49 +#. OEM image if target disk is defined +#: src/lib/installation/clients/inst_deploy_image.rb:49 msgid "The system will reboot now..." msgstr "이제 시스템이 재부팅됩니다..." -#. bnc #395030 -#. Use less memory -#. twice more steps -#. FIXME: 2 minutes -#. own workflow for OEM image deployment -#: src/lib/installation/clients/inst_deploy_image.rb:107 -#: src/lib/installation/clients/inst_deploy_image.rb:352 -#: src/lib/installation/clients/inst_prepareprogress.rb:110 -#: src/lib/installation/clients/inst_prepareprogress.rb:150 +#. bnc #395030 +#. Use less memory +#. twice more steps +#. FIXME: 2 minutes +#. own workflow for OEM image deployment +#: src/lib/installation/clients/inst_deploy_image.rb:107 +#: src/lib/installation/clients/inst_deploy_image.rb:352 +#: src/lib/installation/clients/inst_prepareprogress.rb:110 +#: src/lib/installation/clients/inst_prepareprogress.rb:150 msgid "Deploying Images..." msgstr "이미지를 배포하는 중..." -#. BNC #444209 -#. false == error -#: src/lib/installation/clients/inst_deploy_image.rb:168 +#. BNC #444209 +#. false == error +#: src/lib/installation/clients/inst_deploy_image.rb:168 msgid "" "Deploying images has failed.\n" "Aborting the installation...\n" @@ -785,241 +756,236 @@ "이미지 배포에 실패했습니다.\n" "설치를 중단하는 중입니다.\n" -#. TRANSLATORS: pop-up message -#: src/lib/installation/clients/inst_deploy_image.rb:200 +#. TRANSLATORS: pop-up message +#: src/lib/installation/clients/inst_deploy_image.rb:200 msgid "" "Debugging has been turned on.\n" -"YaST will open a software manager for you to check the current status of " -"packages." +"YaST will open a software manager for you to check the current status of packages." msgstr "" "디버깅이 켜졌습니다.\n" "패키지의 현재 상태를 확인할 수 있도록 YaST에서 소프트웨어 관리자를 엽니다." -#. unknown image -#: src/lib/installation/clients/inst_deploy_image.rb:376 +#. unknown image +#: src/lib/installation/clients/inst_deploy_image.rb:376 msgid "Downloading image at speed %1/s" msgstr "%1/초 속도로 이미지 다운로드 중" -#: src/lib/installation/clients/inst_deploy_image.rb:381 +#: src/lib/installation/clients/inst_deploy_image.rb:381 msgid "Downloading image %1 at speed %2/s" msgstr "%2/초 속도로 %1 이미지 다운로드 중" -#. reset the label -#: src/lib/installation/clients/inst_deploy_image.rb:441 +#. reset the label +#: src/lib/installation/clients/inst_deploy_image.rb:441 msgid "Deploying image..." msgstr "이미지를 배포하는 중..." -#: src/lib/installation/clients/inst_deploy_image.rb:444 +#: src/lib/installation/clients/inst_deploy_image.rb:444 msgid "Deploying image %1..." msgstr "%1 이미지를 배포하는 중..." -#. FIXME: move blacklist to Storage -#: src/lib/installation/clients/inst_disk_for_image.rb:84 +#. FIXME: move blacklist to Storage +#: src/lib/installation/clients/inst_disk_for_image.rb:84 msgid "Select the disk to deploy the image to." msgstr "이미지를 배포할 디스크를 선택하십시오." -#: src/lib/installation/clients/inst_disk_for_image.rb:85 +#: src/lib/installation/clients/inst_disk_for_image.rb:85 msgid "All data on the disk will be lost!!!" msgstr "디스크의 모든 데이터가 손실됩니다." -#: src/lib/installation/clients/inst_disk_for_image.rb:87 +#: src/lib/installation/clients/inst_disk_for_image.rb:87 msgid "&Disk to Use" msgstr "사용할 디스크(&D)" -#: src/lib/installation/clients/inst_disk_for_image.rb:92 -msgid "" -"Select the disk, which the image will be deployed to. All data on the disk " -"will be lost and the disk will be partitioned as defined in the image." -msgstr "" -"이미지가 배포될 디스크를 선택하십시오. 디스크의 모든 데이터가 손실되고 이미지" -"에 정의된 대로 디스크가 분할됩니다." +#: src/lib/installation/clients/inst_disk_for_image.rb:92 +msgid "Select the disk, which the image will be deployed to. All data on the disk will be lost and the disk will be partitioned as defined in the image." +msgstr "이미지가 배포될 디스크를 선택하십시오. 디스크의 모든 데이터가 손실되고 이미지에 정의된 대로 디스크가 분할됩니다." -#: src/lib/installation/clients/inst_disk_for_image.rb:99 +#: src/lib/installation/clients/inst_disk_for_image.rb:99 msgid "Hard Disk for Image Deployment" msgstr "이미지 배포에 사용할 하드 디스크" -#. popup label -#: src/lib/installation/clients/inst_disks_activate.rb:63 +#. popup label +#: src/lib/installation/clients/inst_disks_activate.rb:63 msgid "Detecting Available Controllers" msgstr "사용 가능한 컨트롤러 검색" -#. dialog caption -#: src/lib/installation/clients/inst_disks_activate.rb:79 +#. dialog caption +#: src/lib/installation/clients/inst_disks_activate.rb:79 msgid "Disk Activation" msgstr "디스크 활성화" -#: src/lib/installation/clients/inst_disks_activate.rb:89 +#: src/lib/installation/clients/inst_disks_activate.rb:89 msgid "Configure &DASD Disks" msgstr "DASD 디스크 구성(&D)" -#: src/lib/installation/clients/inst_disks_activate.rb:95 +#: src/lib/installation/clients/inst_disks_activate.rb:95 msgid "Configure &ZFCP Disks" msgstr "ZFCP 디스크 구성(&Z)" -#: src/lib/installation/clients/inst_disks_activate.rb:101 +#: src/lib/installation/clients/inst_disks_activate.rb:101 msgid "Configure &FCoE Interfaces" msgstr "FCoE 인터페이스 구성(&F)" -#: src/lib/installation/clients/inst_disks_activate.rb:115 +#: src/lib/installation/clients/inst_disks_activate.rb:115 msgid "Configure &iSCSI Disks" msgstr "iSCSI 디스크 구성(&I)" -#. Finish -#: src/lib/installation/clients/inst_disks_activate.rb:176 +#. Finish +#: src/lib/installation/clients/inst_disks_activate.rb:176 msgid "Net&work Configuration..." msgstr "네트워크 구성(&W)..." -#. TRANSLATORS: dialog caption -#: src/lib/installation/clients/inst_doit.rb:56 +#. TRANSLATORS: dialog caption +#: src/lib/installation/clients/inst_doit.rb:56 msgid "Installation - Warming Up" msgstr "설치 - 준비 작업" -#. TRANSLATORS: dialog help -#: src/lib/installation/clients/inst_doit.rb:63 +#. TRANSLATORS: dialog help +#: src/lib/installation/clients/inst_doit.rb:63 msgid "<p>Installation is just about to start!</p>" msgstr "<p>설치가 시작됩니다!</p>" -#. Set the UI content to show some progress. -#. FIXME: use a better title (reused existing texts because of text freeze) -#. TRANSLATORS: dialog caption -#. bug #302384 -#: src/lib/installation/clients/inst_download_release_notes.rb:145 -#: src/lib/installation/clients/inst_initialization.rb:56 -#: src/lib/installation/clients/inst_installation_options.rb:149 +#. Set the UI content to show some progress. +#. FIXME: use a better title (reused existing texts because of text freeze) +#. TRANSLATORS: dialog caption +#. bug #302384 +#: src/lib/installation/clients/inst_download_release_notes.rb:145 +#: src/lib/installation/clients/inst_initialization.rb:56 +#: src/lib/installation/clients/inst_installation_options.rb:149 msgid "Initializing" msgstr "초기화 중" -#. TRANSLATORS: dialog progress message -#: src/lib/installation/clients/inst_download_release_notes.rb:145 -#: src/lib/installation/clients/inst_initialization.rb:44 +#. TRANSLATORS: dialog progress message +#: src/lib/installation/clients/inst_download_release_notes.rb:145 +#: src/lib/installation/clients/inst_initialization.rb:44 msgid "Initializing the installation..." msgstr "설치 초기화 중..." -#. popup message, list of repositores is appended to the text -#: src/lib/installation/clients/inst_extrasources.rb:141 +#. popup message, list of repositores is appended to the text +#: src/lib/installation/clients/inst_extrasources.rb:141 msgid "Package updates have been found in these additional repositories:" msgstr "다음 추가 리포지토리에서 패키지 업데이트가 발견되었습니다." -#. yes/no popup question -#: src/lib/installation/clients/inst_extrasources.rb:159 +#. yes/no popup question +#: src/lib/installation/clients/inst_extrasources.rb:159 msgid "Start the software manager to check and install the updates?" msgstr "소프트웨어 관리자를 시작하여 업데이트를 확인 및 설치하시겠습니까?" -#. check box -#: src/lib/installation/clients/inst_extrasources.rb:497 +#. check box +#: src/lib/installation/clients/inst_extrasources.rb:497 msgid "Show &package updates" msgstr "패키지 업데이트 표시(&P)" -#. a fallback busy message -#: src/lib/installation/clients/inst_finish.rb:98 +#. a fallback busy message +#: src/lib/installation/clients/inst_finish.rb:98 msgid "Calling step %1..." msgstr "%1 단계 호출 중..." -#. use as ' * %1' -> ' * One of the finish steps...' in the SlideShow log -#: src/lib/installation/clients/inst_finish.rb:112 +#. use as ' * %1' -> ' * One of the finish steps...' in the SlideShow log +#: src/lib/installation/clients/inst_finish.rb:112 msgid " * %1" msgstr " * %1" -#. get the latest errors -#: src/lib/installation/clients/inst_finish.rb:253 +#. get the latest errors +#: src/lib/installation/clients/inst_finish.rb:253 msgid "Installation Error" msgstr "설치 오류" -#. Adjust a SlideShow dialog if not configured -#. kilobytes -#. just make it longer than inst_finish, TODO: better value later -#: src/lib/installation/clients/inst_finish.rb:276 -#: src/lib/installation/clients/inst_prepareprogress.rb:138 -#: src/lib/installation/clients/inst_prepareprogress.rb:156 +#. Adjust a SlideShow dialog if not configured +#. kilobytes +#. just make it longer than inst_finish, TODO: better value later +#: src/lib/installation/clients/inst_finish.rb:276 +#: src/lib/installation/clients/inst_prepareprogress.rb:138 +#: src/lib/installation/clients/inst_prepareprogress.rb:156 msgid "Finishing Basic Installation" msgstr "기본 설치 완료 중" -#. Might be left from the previous stage -#: src/lib/installation/clients/inst_finish.rb:299 +#. Might be left from the previous stage +#: src/lib/installation/clients/inst_finish.rb:299 msgid "Creating list of finish scripts to call..." msgstr "완료 스크립트 목록 생성을 호출..." -#: src/lib/installation/clients/inst_finish.rb:307 +#: src/lib/installation/clients/inst_finish.rb:307 msgid "Finished" msgstr "완료됨" -#. progress stage -#: src/lib/installation/clients/inst_finish.rb:457 +#. progress stage +#: src/lib/installation/clients/inst_finish.rb:457 msgid "Copy files to installed system" msgstr "설치된 시스템으로 파일 복사" -#. progress stage -#: src/lib/installation/clients/inst_finish.rb:464 +#. progress stage +#: src/lib/installation/clients/inst_finish.rb:464 msgid "Save configuration" msgstr "구성 저장" -#. progress stage -#: src/lib/installation/clients/inst_finish.rb:471 +#. progress stage +#: src/lib/installation/clients/inst_finish.rb:471 msgid "Save installation settings" msgstr "설치 설정 저장" -#. progress stage -#: src/lib/installation/clients/inst_finish.rb:480 +#. progress stage +#: src/lib/installation/clients/inst_finish.rb:480 msgid "Install boot manager" msgstr "부트 관리자 설치" -#. progress stage -#: src/lib/installation/clients/inst_finish.rb:487 +#. progress stage +#: src/lib/installation/clients/inst_finish.rb:487 msgid "Prepare system for initial boot" msgstr "처음 부팅을 위한 시스템 준비" -#. some steps are called in live installer only -#: src/lib/installation/clients/inst_finish.rb:550 +#. some steps are called in live installer only +#: src/lib/installation/clients/inst_finish.rb:550 msgid "Client %1 returned invalid data." msgstr "클라이언트 %1에서 잘못된 데이터를 반환했습니다." -#. FIXME: looks like product specific finish steps are not used at all -#: src/lib/installation/clients/inst_finish.rb:582 +#. FIXME: looks like product specific finish steps are not used at all +#: src/lib/installation/clients/inst_finish.rb:582 msgid "Checking stage: %1..." msgstr "스테이지 %1 확인 중..." -#. Button to accept a license agreement -#: src/lib/installation/clients/inst_info.rb:63 +#. Button to accept a license agreement +#: src/lib/installation/clients/inst_info.rb:63 msgid "I &Agree" msgstr "동의합니다.(&A)" -#. Button to reject a license agreement -#: src/lib/installation/clients/inst_info.rb:67 +#. Button to reject a license agreement +#: src/lib/installation/clients/inst_info.rb:67 msgid "I Do &Not Agree" msgstr "동의 할수 없습니다.(&N)" -#. TRANSLATORS: dialog help -#: src/lib/installation/clients/inst_initialization.rb:42 +#. TRANSLATORS: dialog help +#: src/lib/installation/clients/inst_initialization.rb:42 msgid "Installation is being initialized." msgstr "설치를 초기화하는 중입니다." -#. TRANSLATORS: dialog progress message -#: src/lib/installation/clients/inst_initialization.rb:50 +#. TRANSLATORS: dialog progress message +#: src/lib/installation/clients/inst_initialization.rb:50 msgid "Preparing the initial system configuration..." msgstr "초기 시스템 구성 준비 중..." -#. dialog caption -#: src/lib/installation/clients/inst_installation_options.rb:80 +#. dialog caption +#: src/lib/installation/clients/inst_installation_options.rb:80 msgid "Installation Options" msgstr "설치 옵션" -#. check box -#: src/lib/installation/clients/inst_installation_options.rb:177 +#. check box +#: src/lib/installation/clients/inst_installation_options.rb:177 msgid "&Add Online Repositories Before Installation" msgstr "설치 전에 온라인 리포지토리 추가(&A)" -#. check box -#: src/lib/installation/clients/inst_installation_options.rb:189 +#. check box +#: src/lib/installation/clients/inst_installation_options.rb:189 msgid "In&clude Add-on Products from Separate Media" msgstr "별도 미디어의 추가 기능 제품 포함(&C)" -#. help text for installation method -#: src/lib/installation/clients/inst_installation_options.rb:200 +#. help text for installation method +#: src/lib/installation/clients/inst_installation_options.rb:200 msgid "<p><big><b>Installation Options</b></big></p>" msgstr "<p><big><b>설치 옵션</b></big></p>" -#. help text for installation option -#: src/lib/installation/clients/inst_installation_options.rb:203 +#. help text for installation option +#: src/lib/installation/clients/inst_installation_options.rb:203 msgid "" "<p>\n" "To use suggested remote repositories during installation or update, select\n" @@ -1029,44 +995,39 @@ "원격 리포지토리를 설치 또는 업데이트에 사용하려면\n" "<b>설치 전에 온라인 리포지토리 추가</b>를 선택하십시오.</p>" -#. help text for installation method -#: src/lib/installation/clients/inst_installation_options.rb:209 +#. help text for installation method +#: src/lib/installation/clients/inst_installation_options.rb:209 msgid "" "<p>\n" -"To install an add-on product from separate media together with &product;, " -"select\n" +"To install an add-on product from separate media together with &product;, select\n" "<b>Include Add-on Products from Separate Media</b>.</p>\n" msgstr "" "<p>\n" "별도 미디어의 추가 기능 제품과 &product;을(를) 함께 설치하려면\n" "<b>별도 미디어의 추가 기능 제품 포함</b>을 선택하십시오.</p>\n" -#. help text: additional help for installation -#: src/lib/installation/clients/inst_installation_options.rb:212 -msgid "" -"<p>If you need specific hardware drivers for installation, see <i>http://" -"drivers.suse.com</i> site.</p>" -msgstr "" -"<p>설치에 특정 하드웨어 드라이버가 필요한 경우 <i>http://drivers.suse.com 사이트를 참조하십시오.</p>" +#. help text: additional help for installation +#: src/lib/installation/clients/inst_installation_options.rb:212 +msgid "<p>If you need specific hardware drivers for installation, see <i>http://drivers.suse.com</i> site.</p>" +msgstr "<p>설치에 특정 하드웨어 드라이버가 필요한 경우 <i>http://drivers.suse.com</i> 사이트를 참조하십시오.</p>" -#. Title for root-password dialogue -#: src/lib/installation/clients/inst_keyboard_root_password.rb:55 +#. Title for root-password dialogue +#: src/lib/installation/clients/inst_keyboard_root_password.rb:55 msgid "Keyboard Layout and Password for the System Administrator \"root\"" msgstr "시스템 관리자 \"root\"에 대한 키보드 배열 및 비밀번호" -#. Error message -#: src/lib/installation/clients/inst_license.rb:128 +#. Error message +#: src/lib/installation/clients/inst_license.rb:128 msgid "Internal error: Missing license to show" msgstr "내부 오류: 표시할 라이센스가 누락됨" -#. TRANSLATORS: dialog caption -#: src/lib/installation/clients/inst_network_check.rb:82 +#. TRANSLATORS: dialog caption +#: src/lib/installation/clients/inst_network_check.rb:82 msgid "Network Setup" msgstr "네트워크 설정" -#. TRANSLATORS: dialog label -#: src/lib/installation/clients/inst_network_check.rb:95 +#. TRANSLATORS: dialog label +#: src/lib/installation/clients/inst_network_check.rb:95 msgid "" "No network setup has been found.\n" "It is important if using remote repositories,\n" @@ -1076,28 +1037,28 @@ "원격 리포지토리를 사용할 경우 이 설정이 중요하지만\n" "그렇지 않으면 건너뛸 수도 있습니다.\n" -#. TRANSLATORS: dialog label -#: src/lib/installation/clients/inst_network_check.rb:105 +#. TRANSLATORS: dialog label +#: src/lib/installation/clients/inst_network_check.rb:105 msgid "Configure your network card now?" msgstr "지금 네트워크 카드를 구성하시겠습니까?" -#. TRANSLATORS: frame label -#: src/lib/installation/clients/inst_network_check.rb:109 +#. TRANSLATORS: frame label +#: src/lib/installation/clients/inst_network_check.rb:109 msgid "Select" msgstr "선택" -#. TRANSLATORS: radio button -#: src/lib/installation/clients/inst_network_check.rb:118 +#. TRANSLATORS: radio button +#: src/lib/installation/clients/inst_network_check.rb:118 msgid "&Yes, Run the Network Setup" msgstr "예, 네트워크 설정을 실행합니다(&Y)." -#. TRANSLATORS: radio button -#: src/lib/installation/clients/inst_network_check.rb:126 +#. TRANSLATORS: radio button +#: src/lib/installation/clients/inst_network_check.rb:126 msgid "No, &Skip the Network Setup" msgstr "아니요, 네트워크 설정을 건너뜁니다(&S)." -#. TRANSLATORS: help text, part 1/2 -#: src/lib/installation/clients/inst_network_check.rb:139 +#. TRANSLATORS: help text, part 1/2 +#: src/lib/installation/clients/inst_network_check.rb:139 msgid "" "<p>The current installation system does not\n" "have a configured network.</p>\n" @@ -1105,19 +1066,17 @@ "<p>현재 설치 시스템에는 네트워크가\n" "구성되어 있지 않습니다.</p>\n" -#. TRANSLATORS: help text, part 2/2 -#: src/lib/installation/clients/inst_network_check.rb:143 +#. TRANSLATORS: help text, part 2/2 +#: src/lib/installation/clients/inst_network_check.rb:143 msgid "" "<p>A configured network is needed for using remote repositories\n" -"or add-on products. If you do not use remote repositories, skip the " -"configuration.</p>\n" +"or add-on products. If you do not use remote repositories, skip the configuration.</p>\n" msgstr "" "<p>구성된 네트워크는 원격 리포지토리나 추가 기능 제품\n" -"사용에 필요합니다. 원격 리포지토리를 사용하지 않는 경우 구성을 건너뛰십시오." -"</p>\n" +"사용에 필요합니다. 원격 리포지토리를 사용하지 않는 경우 구성을 건너뛰십시오.</p>\n" -#. error popup -#: src/lib/installation/clients/inst_network_check.rb:185 +#. error popup +#: src/lib/installation/clients/inst_network_check.rb:185 msgid "" "Network configuration has failed.\n" "Check the log file %1 for details." @@ -1125,44 +1084,37 @@ "네트워크 구성이 실패했습니다.\n" "자세한 내용은 로그 파일 %1을(를) 확인하십시오." -#. TRANSLATORS: help text, part 1 -#: src/lib/installation/clients/inst_new_desktop.rb:57 +#. TRANSLATORS: help text, part 1 +#: src/lib/installation/clients/inst_new_desktop.rb:57 msgid "" -"<p>At Linux <b>choice</b> is a top priority. <i>openSUSE</i> offers a " -"number \n" -"of different desktop environments. Below you see a list of the 2 major " -"ones \n" +"<p>At Linux <b>choice</b> is a top priority. <i>openSUSE</i> offers a number \n" +"of different desktop environments. Below you see a list of the 2 major ones \n" "<b>GNOME</b> and <b>KDE</b>.</p>" msgstr "" "<p>리눅스에서는 <b>선택</b>이 가장 중요합니다. <i>openSUSE</i>에서는\n" "다양한 데스크톱 환경을 제공하고 있습니다. 아래는 가장 많이 쓰이는\n" "데스크톱 환경인 <b>GNOME</b>과 <b>KDE</b>입니다.</p>" -#. TRANSLATORS: help text, part 3 -#: src/lib/installation/clients/inst_new_desktop.rb:63 +#. TRANSLATORS: help text, part 3 +#: src/lib/installation/clients/inst_new_desktop.rb:63 msgid "" -"<p>You may select alternative desktop environments (or one of minimal " -"installation patterns)\n" -"that could fit your needs better using the <b>Other</b> option . Later in " -"the software \n" -"selection or after installation, you can change your selection or add " -"additional desktop \n" +"<p>You may select alternative desktop environments (or one of minimal installation patterns)\n" +"that could fit your needs better using the <b>Other</b> option . Later in the software \n" +"selection or after installation, you can change your selection or add additional desktop \n" "environments. This screen allows you to set the default.</p>" msgstr "" -"<p><b>기타</b> 옵션을 사용하여 대체 데스크톱 환경(최소 설치 등)을 선택할 수" -"도\n" -"있습니다. 소프트웨어 선택 또는 설치 후에도 데스크톱 환경의 선택을 변경하거" -"나\n" +"<p><b>기타</b> 옵션을 사용하여 대체 데스크톱 환경(최소 설치 등)을 선택할 수도\n" +"있습니다. 소프트웨어 선택 또는 설치 후에도 데스크톱 환경의 선택을 변경하거나\n" "추가 할 수 있습니다. 이 화면에서는 기본 설정을 유지합니다.\n" "</p>" -#. TRANSLATORS: dialog caption -#: src/lib/installation/clients/inst_new_desktop.rb:121 +#. TRANSLATORS: dialog caption +#: src/lib/installation/clients/inst_new_desktop.rb:121 msgid "Desktop Selection" msgstr "데스크톱 선택" -#. UI wait loop -#: src/lib/installation/clients/inst_new_desktop.rb:190 +#. UI wait loop +#: src/lib/installation/clients/inst_new_desktop.rb:190 msgid "" "No desktop type was selected.\n" "Select the desired desktop environment." @@ -1170,64 +1122,63 @@ "데스크톱 유형이 선택되지 않았습니다.\n" "원하는 데스크톱 환경을 선택하십시오." -#. BNC #449818 -#: src/lib/installation/clients/inst_new_desktop.rb:383 +#. BNC #449818 +#: src/lib/installation/clients/inst_new_desktop.rb:383 msgid "Other" msgstr "기타" -#. hide the RN button and set the release notes for SlideShow (bnc#871158) -#: src/lib/installation/clients/inst_prepareprogress.rb:56 +#. hide the RN button and set the release notes for SlideShow (bnc#871158) +#: src/lib/installation/clients/inst_prepareprogress.rb:56 msgid "Cannot find base product. Release notes will not be shown." msgstr "기본 제품을 찾을 수 없습니다. 릴리스 정보가 표시되지 않습니다." -#. 1 GB is a good approximation -#: src/lib/installation/clients/inst_prepareprogress.rb:104 +#. 1 GB is a good approximation +#: src/lib/installation/clients/inst_prepareprogress.rb:104 msgid "Preparing disks..." msgstr "디스크 준비 중..." -#. Use 'zero' if image installation is not used -#. BNC #439104 -#: src/lib/installation/clients/inst_prepareprogress.rb:124 +#. Use 'zero' if image installation is not used +#. BNC #439104 +#: src/lib/installation/clients/inst_prepareprogress.rb:124 msgid "Installing Packages..." msgstr "패키지 설치 중..." -#. TRANSLATORS: error message - the module does not provide command line interface -#: src/lib/installation/clients/inst_release_notes.rb:59 +#. TRANSLATORS: error message - the module does not provide command line interface +#: src/lib/installation/clients/inst_release_notes.rb:59 msgid "There is no user interface available for this module." msgstr "이 모듈에 대한 사용자 인터페이스를 사용할 수 없습니다." -#. combobox item -#: src/lib/installation/clients/inst_release_notes.rb:159 +#. combobox item +#: src/lib/installation/clients/inst_release_notes.rb:159 msgid "Language: %1" msgstr "언어: %1" -#. caption for dialog "Release Notes" -#: src/lib/installation/clients/inst_release_notes.rb:206 +#. caption for dialog "Release Notes" +#: src/lib/installation/clients/inst_release_notes.rb:206 msgid "Release Notes" msgstr "릴리스 정보" -#. +2 thingies on the right -#: src/lib/installation/clients/inst_release_notes.rb:248 +#. +2 thingies on the right +#: src/lib/installation/clients/inst_release_notes.rb:248 msgid "&Product" msgstr "제품(&P)" -#. help text for dialog "Release Notes" -#: src/lib/installation/clients/inst_release_notes.rb:260 +#. help text for dialog "Release Notes" +#: src/lib/installation/clients/inst_release_notes.rb:260 msgid "" "<p>The <b>release notes</b> for the installed Linux system provide a brief\n" "summary of new features and changes.</p>\n" msgstr "" -"<p>설치된 Linux 시스템에 대한 <b>릴리스 정보</b>는 새로운 기능 및 변경사항에 " -"대한\n" +"<p>설치된 Linux 시스템에 대한 <b>릴리스 정보</b>는 새로운 기능 및 변경사항에 대한\n" "간략한 요약을 제공합니다.</p>\n" -#. informative message in RichText widget -#: src/lib/installation/clients/inst_release_notes.rb:455 +#. informative message in RichText widget +#: src/lib/installation/clients/inst_release_notes.rb:455 msgid "<p>No release notes have been installed.</p>" msgstr "<p>설치된 릴리스 정보가 없습니다.</p>" -#. TRANSLATORS: help text -#: src/lib/installation/clients/inst_scenarios.rb:108 +#. TRANSLATORS: help text +#: src/lib/installation/clients/inst_scenarios.rb:108 msgid "" "<p>Select the scenario that meets your needs best.\n" "Additional software can be selected later in software proposal.</p>\n" @@ -1235,111 +1186,109 @@ "<p>요구에 가장 적합한 시나리오를 선택하십시오.\n" "나중에 소프트웨어 제안에서 추가 소프트웨어를 선택할 수 있습니다.</p>\n" -#. TRANSLATORS: pop-up message -#: src/lib/installation/clients/inst_scenarios.rb:138 +#. TRANSLATORS: pop-up message +#: src/lib/installation/clients/inst_scenarios.rb:138 msgid "Choose one scenario, please." msgstr "하나의 시나리오를 선택하십시오." -#. TRANSLATORS: frame label -#: src/lib/installation/clients/inst_scenarios.rb:300 +#. TRANSLATORS: frame label +#: src/lib/installation/clients/inst_scenarios.rb:300 msgid "Choose Scenario" msgstr "시나리오 선택" -#. This dialog in not interactive -#. always return `back when came from the previous dialog -#: src/lib/installation/clients/inst_system_analysis.rb:70 +#. This dialog in not interactive +#. always return `back when came from the previous dialog +#: src/lib/installation/clients/inst_system_analysis.rb:70 msgid "Analyzing the Computer" msgstr "컴퓨터 분석" -#. TRANSLATORS: progress steps in system probing -#: src/lib/installation/clients/inst_system_analysis.rb:89 +#. TRANSLATORS: progress steps in system probing +#: src/lib/installation/clients/inst_system_analysis.rb:89 msgid "Probe USB devices" msgstr "USB 장치 검색" -#: src/lib/installation/clients/inst_system_analysis.rb:90 +#: src/lib/installation/clients/inst_system_analysis.rb:90 msgid "Probing USB devices..." msgstr "USB 장치 검색 중..." -#: src/lib/installation/clients/inst_system_analysis.rb:93 +#: src/lib/installation/clients/inst_system_analysis.rb:93 msgid "Probe FireWire devices" msgstr "FireWire 장치 검색" -#: src/lib/installation/clients/inst_system_analysis.rb:94 +#: src/lib/installation/clients/inst_system_analysis.rb:94 msgid "Probing FireWire devices..." msgstr "FireWire 장치 검색중" -#: src/lib/installation/clients/inst_system_analysis.rb:97 +#: src/lib/installation/clients/inst_system_analysis.rb:97 msgid "Probe floppy disk devices" msgstr "플로피 디스크 장치 검색" -#: src/lib/installation/clients/inst_system_analysis.rb:98 +#: src/lib/installation/clients/inst_system_analysis.rb:98 msgid "Probing floppy disk devices..." msgstr "플로피 디스크 장치 검색중..." -#: src/lib/installation/clients/inst_system_analysis.rb:102 +#: src/lib/installation/clients/inst_system_analysis.rb:102 msgid "Probe hard disk controllers" msgstr "하드 디스크 컨트롤러 검색" -#: src/lib/installation/clients/inst_system_analysis.rb:103 +#: src/lib/installation/clients/inst_system_analysis.rb:103 msgid "Probing hard disk controllers..." msgstr "하드 디스크 컨트롤러 검색 중" -#: src/lib/installation/clients/inst_system_analysis.rb:106 +#: src/lib/installation/clients/inst_system_analysis.rb:106 msgid "Load kernel modules for hard disk controllers" msgstr "하드 디스크 컨트롤러용 커널 모듈 로드" -#: src/lib/installation/clients/inst_system_analysis.rb:107 +#: src/lib/installation/clients/inst_system_analysis.rb:107 msgid "Loading kernel modules for hard disk controllers..." msgstr "하드 디스크 컨트롤러용 커널 모듈 로드 중..." -#: src/lib/installation/clients/inst_system_analysis.rb:110 +#: src/lib/installation/clients/inst_system_analysis.rb:110 msgid "Probe hard disks" msgstr "하드 디스크 검색" -#: src/lib/installation/clients/inst_system_analysis.rb:111 +#: src/lib/installation/clients/inst_system_analysis.rb:111 msgid "Probing hard disks..." msgstr "하드 디스크 검색 중..." -#. FATE #302980: Simplified user config during installation -#: src/lib/installation/clients/inst_system_analysis.rb:118 +#. FATE #302980: Simplified user config during installation +#: src/lib/installation/clients/inst_system_analysis.rb:118 msgid "Search for system files" msgstr "시스템 파일 검색" -#: src/lib/installation/clients/inst_system_analysis.rb:119 +#: src/lib/installation/clients/inst_system_analysis.rb:119 msgid "Searching for system files..." msgstr "시스템 파일 검색 중..." -#: src/lib/installation/clients/inst_system_analysis.rb:122 +#: src/lib/installation/clients/inst_system_analysis.rb:122 msgid "Initialize software manager" msgstr "소프트웨어 관리자 초기화" -#: src/lib/installation/clients/inst_system_analysis.rb:123 +#: src/lib/installation/clients/inst_system_analysis.rb:123 msgid "Initializing software manager..." msgstr "소프트웨어 관리자를 초기화하는 중입니다." -#. TRANSLATORS: dialog caption -#: src/lib/installation/clients/inst_system_analysis.rb:128 +#. TRANSLATORS: dialog caption +#: src/lib/installation/clients/inst_system_analysis.rb:128 msgid "System Probing" msgstr "시스템 검색 중" -#. TRANSLATORS: dialog help -#: src/lib/installation/clients/inst_system_analysis.rb:134 +#. TRANSLATORS: dialog help +#: src/lib/installation/clients/inst_system_analysis.rb:134 msgid "YaST is probing computer hardware and installed systems now." msgstr "현재 YaST에서 컴퓨터 하드웨어 및 설치된 시스템을 검사 중입니다." -#. additonal error when HW was not found -#: src/lib/installation/clients/inst_system_analysis.rb:232 +#. additonal error when HW was not found +#: src/lib/installation/clients/inst_system_analysis.rb:232 msgid "" "\n" -"Check 'drivers.suse.com' if you need specific hardware drivers for " -"installation." +"Check 'drivers.suse.com' if you need specific hardware drivers for installation." msgstr "" "\n" -"설치에 특정 하드웨어 드라이버가 필요한 경우 'drivers.suse.com'을 확인하십시" -"오." +"설치에 특정 하드웨어 드라이버가 필요한 경우 'drivers.suse.com'을 확인하십시오." -#. pop-up error report -#: src/lib/installation/clients/inst_system_analysis.rb:246 +#. pop-up error report +#: src/lib/installation/clients/inst_system_analysis.rb:246 msgid "" "No hard disks were found for the installation.\n" "Please check your hardware!\n" @@ -1349,7 +1298,7 @@ "하드웨어를 확인하십시오.\n" "%1\n" -#: src/lib/installation/clients/inst_system_analysis.rb:256 +#: src/lib/installation/clients/inst_system_analysis.rb:256 msgid "" "No hard disks were found for the installation.\n" "During an automatic installation, they might be detected later.\n" @@ -1359,8 +1308,8 @@ "자동 설치 중 나중에 검색될 수도 있습니다.\n" "(특히 S/390 또는 iSCSI 시스템에서)\n" -#. pop-up error report -#: src/lib/installation/clients/inst_system_analysis.rb:267 +#. pop-up error report +#: src/lib/installation/clients/inst_system_analysis.rb:267 msgid "" "No hard disks and no hard disk controllers were\n" "found for the installation.\n" @@ -1372,8 +1321,8 @@ "하드웨어를 확인하십시오.\n" "%1\n" -#. popup message -#: src/lib/installation/clients/inst_system_analysis.rb:312 +#. popup message +#: src/lib/installation/clients/inst_system_analysis.rb:312 msgid "" "Failed to initialize the software repositories.\n" "Aborting the installation." @@ -1381,8 +1330,8 @@ "소프트웨어 리포지토리를 초기화하지 못했습니다.\n" "설치가 중단됩니다." -#. TRANSLATORS: error message -#: src/lib/installation/clients/inst_update_installer.rb:232 +#. TRANSLATORS: error message +#: src/lib/installation/clients/inst_update_installer.rb:232 msgid "" "<p>Cannot obtain the installer update repository URL\n" "from the registration server.</p>" @@ -1390,18 +1339,18 @@ "<p>등록 서버에서 설치 프로그램 업데이트 리포지토리 URL을\n" "가져올 수 없습니다.</p>" -#. TRANSLATORS: part of an error message, %s is the default repository -#. URL from control.xml -#: src/lib/installation/clients/inst_update_installer.rb:238 +#. TRANSLATORS: part of an error message, %s is the default repository +#. URL from control.xml +#: src/lib/installation/clients/inst_update_installer.rb:238 msgid "<p>The default URL %s will be used.<p>" msgstr "<p>기본 URL %s이(가) 사용됩니다.<p>" -#. Ask the user to chose a registration server -#. -#. @param services [ArraySlpServiceClass::Service] Array of registration servers -#. @return [SlpServiceClass::Service,Symbol] Registration service to use; :scc if SCC is selected; -#. :cancel if the dialog was dismissed. -#: src/lib/installation/clients/inst_update_installer.rb:315 +#. Ask the user to chose a registration server +#. +#. @param services [ArraySlpServiceClass::Service] Array of registration servers +#. @return [SlpServiceClass::Service,Symbol] Registration service to use; :scc if SCC is selected; +#. :cancel if the dialog was dismissed. +#: src/lib/installation/clients/inst_update_installer.rb:315 msgid "" "Select a detected registration server from the list\n" "to search for installer updates." @@ -1409,8 +1358,8 @@ "목록에서 감지된 등록 서버를 선택하여\n" "설치 프로그램 업데이트를 검색하십시오." -#. TRANSLATORS: %s is an URL -#: src/lib/installation/clients/inst_update_installer.rb:396 +#. TRANSLATORS: %s is an URL +#: src/lib/installation/clients/inst_update_installer.rb:396 msgid "" "A valid update could not be found at\n" "%s.\n" @@ -1420,8 +1369,8 @@ "\n" "\n" -#. TRANSLATORS: %s is an URL -#: src/lib/installation/clients/inst_update_installer.rb:402 +#. TRANSLATORS: %s is an URL +#: src/lib/installation/clients/inst_update_installer.rb:402 msgid "" "Could not fetch update from\n" "%s.\n" @@ -1431,15 +1380,15 @@ "\n" "\n" -#. Launch the network configuration client on users' demand -#. -#. Ask the user about checking network configuration. If she/he accepts, -#. the `inst_lan` client will be launched. -#. -#. @param reason [String] reason why user want to check his network configuration -#. @return [Boolean] true if the network configuration client was launched; -#. false if the network is not configured. -#: src/lib/installation/clients/inst_update_installer.rb:432 +#. Launch the network configuration client on users' demand +#. +#. Ask the user about checking network configuration. If she/he accepts, +#. the `inst_lan` client will be launched. +#. +#. @param reason [String] reason why user want to check his network configuration +#. @return [Boolean] true if the network configuration client was launched; +#. false if the network is not configured. +#: src/lib/installation/clients/inst_update_installer.rb:432 msgid "" "\n" "Would you like to check your network configuration\n" @@ -1449,10 +1398,10 @@ "네트워크 구성을 확인하고 업데이트 설치를\n" "다시 시도하시겠습니까?" -#. Note: the proxy cannot be configured in the YaST installer yet, -#. it needs to be set via the "proxy" boot option. -#. TRANSLATORS: %s is an URL -#: src/lib/installation/clients/inst_update_installer.rb:477 +#. Note: the proxy cannot be configured in the YaST installer yet, +#. it needs to be set via the "proxy" boot option. +#. TRANSLATORS: %s is an URL +#: src/lib/installation/clients/inst_update_installer.rb:477 msgid "" "Downloading the optional installer updates from \n" "%s\n" @@ -1473,36 +1422,36 @@ "업데이트 리포지토리 액세스를 위해 프록시 서버가 필요한 경우\n" "\"proxy\" 부팅 파라미터를 사용하십시오.\n" -#. TRANSLATORS: progress label -#: src/lib/installation/clients/inst_update_installer.rb:586 +#. TRANSLATORS: progress label +#: src/lib/installation/clients/inst_update_installer.rb:586 msgid "Add Update Repository" msgstr "리포지토리 업데이트 추가" -#: src/lib/installation/clients/inst_update_installer.rb:587 +#: src/lib/installation/clients/inst_update_installer.rb:587 msgid "Download the Packages" msgstr "패키지 다운로드" -#: src/lib/installation/clients/inst_update_installer.rb:588 +#: src/lib/installation/clients/inst_update_installer.rb:588 msgid "Apply the Packages" msgstr "패키지 적용" -#: src/lib/installation/clients/inst_update_installer.rb:589 +#: src/lib/installation/clients/inst_update_installer.rb:589 msgid "Restart" msgstr "다시 시작" -#. TRANSLATORS: dialog title -#. TRANSLATORS: progress title -#: src/lib/installation/clients/inst_update_installer.rb:600 -#: src/lib/installation/clients/inst_update_installer.rb:602 +#. TRANSLATORS: dialog title +#. TRANSLATORS: progress title +#: src/lib/installation/clients/inst_update_installer.rb:600 +#: src/lib/installation/clients/inst_update_installer.rb:602 msgid "Updating the Installer..." msgstr "설치 프로그램 업데이트 중..." -#. Fetch the profile from the given URI -#. -#. @return [Hash, nil] current profile if fetched or exists; nil otherwise -#. -#. @see Yast::Profile.current -#: src/lib/installation/clients/inst_update_installer.rb:673 +#. Fetch the profile from the given URI +#. +#. @return [Hash, nil] current profile if fetched or exists; nil otherwise +#. +#. @see Yast::Profile.current +#: src/lib/installation/clients/inst_update_installer.rb:673 msgid "" "Error while parsing the control file.\n" "\n" @@ -1510,33 +1459,33 @@ "제어 파일 분석 중 오류가 발생했습니다.\n" "\n" -#. TRANSLATORS: Table item status (repository) -#: src/lib/installation/clients/inst_upgrade_urls.rb:109 +#. TRANSLATORS: Table item status (repository) +#: src/lib/installation/clients/inst_upgrade_urls.rb:109 msgid "Removed" msgstr "제거됨" -#. TRANSLATORS: Table item status (repository) -#: src/lib/installation/clients/inst_upgrade_urls.rb:113 +#. TRANSLATORS: Table item status (repository) +#: src/lib/installation/clients/inst_upgrade_urls.rb:113 msgid "Enabled" msgstr "활성화됨" -#. TRANSLATORS: Table item status (repository) -#: src/lib/installation/clients/inst_upgrade_urls.rb:117 +#. TRANSLATORS: Table item status (repository) +#: src/lib/installation/clients/inst_upgrade_urls.rb:117 msgid "Disabled" msgstr "비활성화" -#. TRANSLATORS: dialog caption -#. TRANSLATORS: dialog caption -#. TRANSLATORS: dialog caption -#: src/lib/installation/clients/inst_upgrade_urls.rb:220 -#: src/lib/installation/clients/inst_upgrade_urls.rb:617 -#: src/lib/installation/clients/inst_upgrade_urls.rb:676 +#. TRANSLATORS: dialog caption +#. TRANSLATORS: dialog caption +#. TRANSLATORS: dialog caption +#: src/lib/installation/clients/inst_upgrade_urls.rb:220 +#: src/lib/installation/clients/inst_upgrade_urls.rb:617 +#: src/lib/installation/clients/inst_upgrade_urls.rb:676 msgid "Previously Used Repositories" msgstr "이전에 사용된 리포지토리" -#. TRANSLATORS: dialog text, possibly multiline, -#. Please, do not use more than 50 characters per line. -#: src/lib/installation/clients/inst_upgrade_urls.rb:226 +#. TRANSLATORS: dialog text, possibly multiline, +#. Please, do not use more than 50 characters per line. +#: src/lib/installation/clients/inst_upgrade_urls.rb:226 msgid "" "These repositories were found on the system\n" "you are upgrading:" @@ -1544,48 +1493,46 @@ "업그레이드할 시스템에 다음과 같은\n" "리포지토리가 있습니다." -#. TRANSLATORS: Table header item -#: src/lib/installation/clients/inst_upgrade_urls.rb:236 +#. TRANSLATORS: Table header item +#: src/lib/installation/clients/inst_upgrade_urls.rb:236 msgid "Current Status" msgstr "현재 상태" -#. TRANSLATORS: Table header item -#: src/lib/installation/clients/inst_upgrade_urls.rb:238 +#. TRANSLATORS: Table header item +#: src/lib/installation/clients/inst_upgrade_urls.rb:238 msgid "Repository" msgstr "리포지토리" -#. TRANSLATORS: Table header item -#: src/lib/installation/clients/inst_upgrade_urls.rb:240 +#. TRANSLATORS: Table header item +#: src/lib/installation/clients/inst_upgrade_urls.rb:240 msgid "URL" msgstr "URL" -#. TRANSLATORS: Push button -#. menu button -#. menu button -#: src/lib/installation/clients/inst_upgrade_urls.rb:247 -#: src/lib/installation/proposal_runner.rb:675 -#: src/lib/installation/proposal_runner.rb:793 +#. TRANSLATORS: Push button +#. menu button +#. menu button +#: src/lib/installation/clients/inst_upgrade_urls.rb:247 +#: src/lib/installation/proposal_runner.rb:675 +#: src/lib/installation/proposal_runner.rb:793 msgid "&Change..." msgstr "변경(&C)..." -#. TRANSLATORS: Push button -#: src/lib/installation/clients/inst_upgrade_urls.rb:250 +#. TRANSLATORS: Push button +#: src/lib/installation/clients/inst_upgrade_urls.rb:250 msgid "&Toggle Status" msgstr "상태 토글(&T)" -#. TRANSLATORS: help text 1/3 -#: src/lib/installation/clients/inst_upgrade_urls.rb:256 +#. TRANSLATORS: help text 1/3 +#: src/lib/installation/clients/inst_upgrade_urls.rb:256 msgid "" "<p>Here you see all software repositories found\n" -"on the system you are upgrading. Enable the ones you want to include in the " -"upgrade process.</p>" +"on the system you are upgrading. Enable the ones you want to include in the upgrade process.</p>" msgstr "" "<p>여기서 업그레이드할 시스템에 있는 모든 소프트웨어\n" -"리포지토리를 볼 수 있습니다. 업그레이드 프로세스에 포함할 리포지토리를 활성화" -"하십시오.</p>" +"리포지토리를 볼 수 있습니다. 업그레이드 프로세스에 포함할 리포지토리를 활성화하십시오.</p>" -#. TRANSLATORS: help text 2/3 -#: src/lib/installation/clients/inst_upgrade_urls.rb:260 +#. TRANSLATORS: help text 2/3 +#: src/lib/installation/clients/inst_upgrade_urls.rb:260 msgid "" "<p>To enable, remove or disable an URL, click on the\n" "<b>Toggle Status</b> button or double-click on the respective table item.</p>" @@ -1593,32 +1540,32 @@ "<p>URL을 활성화, 제거 또는 비활성화하려면\n" "<b>상태 토글</b> 버튼을 클릭하거나 각 테이블 항목을 더블 클릭하십시오.</p>" -#. TRANSLATORS: help text 3/3 -#: src/lib/installation/clients/inst_upgrade_urls.rb:264 +#. TRANSLATORS: help text 3/3 +#: src/lib/installation/clients/inst_upgrade_urls.rb:264 msgid "<p>To change the URL, click on the <b>Change...</b> button.</p>" msgstr "<p>URL을 변경하려면 <b>변경...</b> 버튼을 클릭합니다.</p>" -#. one_url already has "id" and some items might be deleted -#. looking to id_to_name is done via the original key -#. TRANSLATORS: Fallback name for a repository -#: src/lib/installation/clients/inst_upgrade_urls.rb:286 -#: src/lib/installation/clients/inst_upgrade_urls.rb:293 -#: src/lib/installation/clients/inst_upgrade_urls.rb:299 +#. one_url already has "id" and some items might be deleted +#. looking to id_to_name is done via the original key +#. TRANSLATORS: Fallback name for a repository +#: src/lib/installation/clients/inst_upgrade_urls.rb:286 +#: src/lib/installation/clients/inst_upgrade_urls.rb:293 +#: src/lib/installation/clients/inst_upgrade_urls.rb:299 msgid "Unknown" msgstr "알수 없음`" -#. TRANSLATORS: textentry -#: src/lib/installation/clients/inst_upgrade_urls.rb:373 +#. TRANSLATORS: textentry +#: src/lib/installation/clients/inst_upgrade_urls.rb:373 msgid "&Repository URL" msgstr "리포지토리 URL(&R)" -#. TRANSLATORS: popup header -#: src/lib/installation/clients/inst_upgrade_urls.rb:587 +#. TRANSLATORS: popup header +#: src/lib/installation/clients/inst_upgrade_urls.rb:587 msgid "Network is not Configured" msgstr "네트워크가 구성되지 않음" -#. TRANSLATORS: popup question -#: src/lib/installation/clients/inst_upgrade_urls.rb:589 +#. TRANSLATORS: popup question +#: src/lib/installation/clients/inst_upgrade_urls.rb:589 msgid "" "Remote repositories require an Internet connection.\n" "Configure it?" @@ -1626,55 +1573,55 @@ "원격 리포지토리에는 인터넷 연결이 필요합니다.\n" "구성하시겠습니까?" -#. TRANSLATORS: Progress text -#: src/lib/installation/clients/inst_upgrade_urls.rb:620 -#: src/lib/installation/clients/inst_upgrade_urls.rb:677 +#. TRANSLATORS: Progress text +#: src/lib/installation/clients/inst_upgrade_urls.rb:620 +#: src/lib/installation/clients/inst_upgrade_urls.rb:677 msgid "Adding and removing repositories..." msgstr "리포지토리 추가 및 제거 중..." -#. TRANSLATORS: help text -#. TRANSLATORS: help text -#: src/lib/installation/clients/inst_upgrade_urls.rb:623 -#: src/lib/installation/clients/inst_upgrade_urls.rb:682 +#. TRANSLATORS: help text +#. TRANSLATORS: help text +#: src/lib/installation/clients/inst_upgrade_urls.rb:623 +#: src/lib/installation/clients/inst_upgrade_urls.rb:682 msgid "<p>Repositories are being added and removed.</p>" msgstr "<p>리포지토리를 추가 및 제거하는 중입니다.</p>" -#: src/lib/installation/clients/inst_upgrade_urls.rb:642 +#: src/lib/installation/clients/inst_upgrade_urls.rb:642 msgid "Remove unused repositories" msgstr "사용하지 않는 리포지토리 제거" -#. force reloading the libzypp repomanager to notice the removed files -#: src/lib/installation/clients/inst_upgrade_urls.rb:646 -#: src/lib/installation/clients/inst_upgrade_urls.rb:803 +#. force reloading the libzypp repomanager to notice the removed files +#: src/lib/installation/clients/inst_upgrade_urls.rb:646 +#: src/lib/installation/clients/inst_upgrade_urls.rb:803 msgid "Removing unused repositories..." msgstr "사용하지 않는 리포지토리 제거 중..." -#: src/lib/installation/clients/inst_upgrade_urls.rb:653 +#: src/lib/installation/clients/inst_upgrade_urls.rb:653 msgid "Add enabled repositories" msgstr "활성화된 리포지토리 추가" -#. Adds selected repositories as <tt>enabled</tt> -#: src/lib/installation/clients/inst_upgrade_urls.rb:656 -#: src/lib/installation/clients/inst_upgrade_urls.rb:869 +#. Adds selected repositories as <tt>enabled</tt> +#: src/lib/installation/clients/inst_upgrade_urls.rb:656 +#: src/lib/installation/clients/inst_upgrade_urls.rb:869 msgid "Adding enabled repositories..." msgstr "활성화된 리포지토리 추가 중..." -#: src/lib/installation/clients/inst_upgrade_urls.rb:665 +#: src/lib/installation/clients/inst_upgrade_urls.rb:665 msgid "Add disabled repositories" msgstr "비활성화된 리포지토리 추가" -#. Adds selected repositories as <tt>disabled</tt> -#: src/lib/installation/clients/inst_upgrade_urls.rb:669 -#: src/lib/installation/clients/inst_upgrade_urls.rb:1026 +#. Adds selected repositories as <tt>disabled</tt> +#: src/lib/installation/clients/inst_upgrade_urls.rb:669 +#: src/lib/installation/clients/inst_upgrade_urls.rb:1026 msgid "Adding disabled repositories..." msgstr "비활성화된 리포지토리 추가 중..." -#. true - OK, continue -#: src/lib/installation/clients/inst_upgrade_urls.rb:843 +#. true - OK, continue +#: src/lib/installation/clients/inst_upgrade_urls.rb:843 msgid "Correct Media Requested" msgstr "올바른 미디어가 요청됨" -#: src/lib/installation/clients/inst_upgrade_urls.rb:845 +#: src/lib/installation/clients/inst_upgrade_urls.rb:845 msgid "" "Make sure that media with label %1\n" "is in the CD/DVD drive.\n" @@ -1686,9 +1633,9 @@ "\n" "건너뛰면 리포지토리가 추가되지 않습니다.\n" -#. Adding repositories in a disabled state, then enable them -#. for the system upgrade -#: src/lib/installation/clients/inst_upgrade_urls.rb:908 +#. Adding repositories in a disabled state, then enable them +#. for the system upgrade +#: src/lib/installation/clients/inst_upgrade_urls.rb:908 msgid "" "Cannot add repository %1\n" "URL: %2\n" @@ -1702,8 +1649,8 @@ "\n" "리포지토리가 비활성화된 상태로 추가됩니다." -#. bnc #543468, do not check aliases of repositories stored in Installation::destdir -#: src/lib/installation/clients/inst_upgrade_urls.rb:945 +#. bnc #543468, do not check aliases of repositories stored in Installation::destdir +#: src/lib/installation/clients/inst_upgrade_urls.rb:945 msgid "" "Cannot add enabled repository\n" "Name: %1\n" @@ -1713,9 +1660,9 @@ "이름: %1\n" "URL: %2" -#. TRANSLATORS: error report -#. %1 is replaced with repo-name, %2 with repo-URL -#: src/lib/installation/clients/inst_upgrade_urls.rb:965 +#. TRANSLATORS: error report +#. %1 is replaced with repo-name, %2 with repo-URL +#: src/lib/installation/clients/inst_upgrade_urls.rb:965 msgid "" "An error occurred while refreshing repository\n" "Name: %1\n" @@ -1725,9 +1672,9 @@ "이름: %1\n" "URL: %2" -#. TRANSLATORS: error report -#. %1 is replaced with repo-name, %2 with repo-URL -#: src/lib/installation/clients/inst_upgrade_urls.rb:985 +#. TRANSLATORS: error report +#. %1 is replaced with repo-name, %2 with repo-URL +#: src/lib/installation/clients/inst_upgrade_urls.rb:985 msgid "" "An error occurred while enabling repository\n" "Name: %1\n" @@ -1737,8 +1684,8 @@ "이름: %1\n" "URL: %2\n" -#. do not probe! adding as disabled! -#: src/lib/installation/clients/inst_upgrade_urls.rb:1066 +#. do not probe! adding as disabled! +#: src/lib/installation/clients/inst_upgrade_urls.rb:1066 msgid "" "Cannot add disabled repository\n" "Name: %1\n" @@ -1748,18 +1695,18 @@ "이름: %1\n" "URL: %2" -#. dialog caption -#: src/lib/installation/clients/inst_welcome.rb:68 +#. dialog caption +#: src/lib/installation/clients/inst_welcome.rb:68 msgid "Welcome" msgstr "시작" -#. welcome text 1/4 -#: src/lib/installation/clients/inst_welcome.rb:71 +#. welcome text 1/4 +#: src/lib/installation/clients/inst_welcome.rb:71 msgid "<p><b>Welcome!</b></p>" msgstr "<p><b>환영합니다!</b></p>" -#. welcome text 2/4 -#: src/lib/installation/clients/inst_welcome.rb:73 +#. welcome text 2/4 +#: src/lib/installation/clients/inst_welcome.rb:73 msgid "" "<p>There are a few more steps to take before your system is ready to\n" "use. YaST will now guide you through some basic configuration. Click\n" @@ -1771,8 +1718,8 @@ " <b>다음</b>을 클릭하십시오. </p>\n" " \n" -#. help ttext -#: src/lib/installation/clients/inst_welcome.rb:85 +#. help ttext +#: src/lib/installation/clients/inst_welcome.rb:85 msgid "" "<p>Click <b>Next</b> to perform the\n" "basic configuration of the system.</p>\n" @@ -1780,126 +1727,126 @@ "<p><b>다음</b>을 클릭하여\n" "시스템 기본 구성을 수행하십시오.</p>\n" -#. TRANSLATORS: error message -#: src/lib/installation/clients/installation.rb:87 +#. TRANSLATORS: error message +#: src/lib/installation/clients/installation.rb:87 msgid "No workflow defined for this kind of installation." msgstr "이런 종류의 설치에 대해 정의된 워크플로가 없습니다." -#. progress step title -#: src/lib/installation/clients/installation_settings_finish.rb:60 +#. progress step title +#: src/lib/installation/clients/installation_settings_finish.rb:60 msgid "Writing automatic configuration..." msgstr "자동 구성을 쓰는 중..." -#. progress step title -#: src/lib/installation/clients/kernel_finish.rb:63 +#. progress step title +#: src/lib/installation/clients/kernel_finish.rb:63 msgid "Updating kernel module dependencies..." msgstr "커널 모듈 의존성 업데이트 중..." -#. progress step title -#: src/lib/installation/clients/ldconfig_finish.rb:60 +#. progress step title +#: src/lib/installation/clients/ldconfig_finish.rb:60 msgid "Setting up linker cache..." msgstr "링커 캐시를 설정하는 중입니다." -#. progress step title -#: src/lib/installation/clients/network_finish.rb:60 +#. progress step title +#: src/lib/installation/clients/network_finish.rb:60 msgid "Saving network configuration..." msgstr "네트워크 구성 저장 중..." -#. progress step title -#: src/lib/installation/clients/pre_umount_finish.rb:65 +#. progress step title +#: src/lib/installation/clients/pre_umount_finish.rb:65 msgid "Checking the installed system..." msgstr "설치된 시스템 검사 중..." -#. progress step title -#: src/lib/installation/clients/proxy_finish.rb:62 +#. progress step title +#: src/lib/installation/clients/proxy_finish.rb:62 msgid "Saving proxy configuration..." msgstr "프록시 구성 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:134 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:134 msgid "Saving time zone..." msgstr "시간대 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:143 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:143 msgid "Saving language..." msgstr "언어 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:148 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:148 msgid "Saving console configuration..." msgstr "콘솔 구성 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:167 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:167 msgid "Saving keyboard configuration..." msgstr "키보드 구성 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:172 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:172 msgid "Saving product information..." msgstr "제품 정보 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:177 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:177 msgid "Saving automatic installation settings..." msgstr "자동 설치 설정을 저장하는 중..." -#. progress step title -#: src/lib/installation/clients/save_config_finish.rb:183 +#. progress step title +#: src/lib/installation/clients/save_config_finish.rb:183 msgid "Saving security settings..." msgstr "보안 설정 저장 중..." -#. progress step title -#: src/lib/installation/clients/save_hw_status_finish.rb:66 +#. progress step title +#: src/lib/installation/clients/save_hw_status_finish.rb:66 msgid "Saving hardware configuration..." msgstr "하드웨어 구성 저장 중..." -#: src/lib/installation/clients/services_finish.rb:9 +#: src/lib/installation/clients/services_finish.rb:9 msgid "Adapting system services ..." msgstr "시스템 서비스 적용 중..." -#. normal=configuration in an installed system -#: src/lib/installation/clients/ssh_import_auto.rb:138 +#. normal=configuration in an installed system +#: src/lib/installation/clients/ssh_import_auto.rb:138 msgid "It makes no sense to write these settings to system." msgstr "이러한 설정을 시스템에 쓰는 것은 의미가 없습니다." -#. proposal part - bootloader label -#. For some reason the CheckBoxFrame Label is cut if the label size -#. exceeds the CheckBoxFrame content's width. MinWidth with label length -#. is used to avoid this issue. -#: src/lib/installation/clients/ssh_import_proposal.rb:21 -#: src/lib/installation/dialogs/ssh_import.rb:98 +#. proposal part - bootloader label +#. For some reason the CheckBoxFrame Label is cut if the label size +#. exceeds the CheckBoxFrame content's width. MinWidth with label length +#. is used to avoid this issue. +#: src/lib/installation/clients/ssh_import_proposal.rb:21 +#: src/lib/installation/dialogs/ssh_import.rb:98 msgid "Import SSH Host Keys and Configuration" msgstr "SSH 호스트 키 및 구성 임포트" -#. menubutton entry -#: src/lib/installation/clients/ssh_import_proposal.rb:23 +#. menubutton entry +#: src/lib/installation/clients/ssh_import_proposal.rb:23 msgid "&Import SSH Host Keys and Configuration" msgstr "SSH 호스트 키 및 구성 임포트(&I)" -#. progress step title -#: src/lib/installation/clients/ssh_settings_finish.rb:64 +#. progress step title +#: src/lib/installation/clients/ssh_settings_finish.rb:64 msgid "Copying SSH settings to installed system..." msgstr "설치된 시스템으로 SSH 설정 복사 중..." -#. progress step title -#: src/lib/installation/clients/switch_scr_finish.rb:65 +#. progress step title +#: src/lib/installation/clients/switch_scr_finish.rb:65 msgid "Moving to installed system..." msgstr "설치된 시스템으로 이동 중..." -#. progress step title -#: src/lib/installation/clients/umount_finish.rb:72 +#. progress step title +#: src/lib/installation/clients/umount_finish.rb:72 msgid "Unmounting all mounted devices..." msgstr "마운트된 모든 장치 언마운트 중..." -#. progress step title -#: src/lib/installation/clients/x11_finish.rb:65 +#. progress step title +#: src/lib/installation/clients/x11_finish.rb:65 msgid "Copying X Window System configuration into system..." msgstr "X Window 시스템 구성을 시스템으로 복사 중..." -#. call command -#: src/lib/installation/clients/yast_inf_finish.rb:108 +#. call command +#: src/lib/installation/clients/yast_inf_finish.rb:108 msgid "" "\n" "**************************************************************\n" @@ -1922,88 +1869,77 @@ "**************************************************************\n" "\t\t" -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2015 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#: src/lib/installation/copy_logs_finish.rb:42 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2015 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#: src/lib/installation/copy_logs_finish.rb:42 msgid "Copying log files to installed system..." msgstr "설치된 시스템으로 로그 파일 복사 중..." -#. Event callback for the 'ok' button -#: src/lib/installation/dialogs/ssh_import.rb:65 +#. Event callback for the 'ok' button +#: src/lib/installation/dialogs/ssh_import.rb:65 msgid "I would like to import SSH keys from a previous installation" msgstr "이전 설치에서 SSH 키를 임포트하려고 합니다." -#: src/lib/installation/dialogs/ssh_import.rb:102 -msgid "" -"<p>Every SSH server is identified by one or several public host keys. Choose " -"an existing Linux installation to reuse the host keys -and thus the " -"identity- of its SSH server. The key files found in /etc/ssh (one pair of " -"files per host key) will be copied to the new system being installed.<p>Check <b>Import SSH Configuration</b> to also copy other files found " -"in /etc/ssh, in addition to the keys.</p>" -msgstr "" -"<p>모든 SSH 서버가 하나 또는 여러 개의 공용 호스트 키로 식별됩니다. 기존 " -"Linux 설치를 선택하여 호스트 키를 다시 사용하고 그 SSH 서버를 식별하십시오. /" -"etc/ssh(호스트키당 파일 한 쌍)의 키 파일이 새로 설치되는 시스템으로 복사됩니" -"다.</p><p><b>SSH 구성 임포트</b>를 확인하여 키뿐만 아니라 /etc/ssh의 다른 파" -"일도 복사하십시오.</p>" +#: src/lib/installation/dialogs/ssh_import.rb:102 +msgid "<p>Every SSH server is identified by one or several public host keys. Choose an existing Linux installation to reuse the host keys -and thus the identity- of its SSH server. The key files found in /etc/ssh (one pair of files per host key) will be copied to the new system being installed.</p><p>Check <b>Import SSH Configuration</b> to also copy other files found in /etc/ssh, in addition to the keys.</p>" +msgstr "<p>모든 SSH 서버가 하나 또는 여러 개의 공용 호스트 키로 식별됩니다. 기존 Linux 설치를 선택하여 호스트 키를 다시 사용하고 그 SSH 서버를 식별하십시오. /etc/ssh(호스트키당 파일 한 쌍)의 키 파일이 새로 설치되는 시스템으로 복사됩니다.</p><p><b>SSH 구성 임포트</b>를 확인하여 키뿐만 아니라 /etc/ssh의 다른 파일도 복사하십시오.</p>" -#. AutoYaST configuration mode. The user can input the device e.b. /dev/sda0 -#: src/lib/installation/dialogs/ssh_import.rb:115 +#. AutoYaST configuration mode. The user can input the device e.b. /dev/sda0 +#: src/lib/installation/dialogs/ssh_import.rb:115 msgid "&Device" msgstr "장치(&D)" -#. TRANSLATORS: %{system_name} is a string like "openSUSE 13.2", %{device} -#. is a string like /dev/sda1 -#: src/lib/installation/dialogs/ssh_import.rb:136 +#. TRANSLATORS: %{system_name} is a string like "openSUSE 13.2", %{device} +#. is a string like /dev/sda1 +#: src/lib/installation/dialogs/ssh_import.rb:136 msgid "%{system_name} at %{device}" msgstr "%{device}의 %{system_name}" -#: src/lib/installation/dialogs/ssh_import.rb:141 +#: src/lib/installation/dialogs/ssh_import.rb:141 msgid "Import SSH Configuration" msgstr "SSH 구성 가져오기" -#. TODO: Add the registration process -#: src/lib/installation/dialogs/worker_role.rb:45 +#. TODO: Add the registration process +#: src/lib/installation/dialogs/worker_role.rb:45 msgid "Dashboard U&RL" msgstr "대시보드 URL(&R)" -#: src/lib/installation/dialogs/worker_role.rb:52 +#: src/lib/installation/dialogs/worker_role.rb:52 msgid "Worker Registration" msgstr "작업자 등록" -#. FIXME: This client is a POC and still under definition -#: src/lib/installation/dialogs/worker_role.rb:58 +#. FIXME: This client is a POC and still under definition +#: src/lib/installation/dialogs/worker_role.rb:58 msgid "Enter the url of the admin dashboard to register as a worker" msgstr "작업자로 등록할 관리자 대시보드의 URL 입력" -#. progress step title -#: src/lib/installation/prep_shrink.rb:34 +#. progress step title +#: src/lib/installation/prep_shrink.rb:34 msgid "Shrinking PREP partition..." msgstr "PREP 파티션 축소 중..." -#. returns true if there is no error or user approved stored errors -#: src/lib/installation/proposal_errors.rb:34 +#. returns true if there is no error or user approved stored errors +#: src/lib/installation/proposal_errors.rb:34 msgid "Error Found in Installation Settings" msgstr "설치 설정에서 오류 발견" -#: src/lib/installation/proposal_errors.rb:35 +#: src/lib/installation/proposal_errors.rb:35 msgid "" "The following errors were found in the configuration proposal.\n" "If you continue with the installation it may not be successful.\n" @@ -2013,23 +1949,23 @@ "설치를 계속 진행하면 실패할 수 있습니다.\n" "오류:\n" -#. question in a popup box -#: src/lib/installation/proposal_runner.rb:212 +#. question in a popup box +#: src/lib/installation/proposal_runner.rb:212 msgid "Really reset everything to default values?" msgstr "정말로 기본값으로 다시 설정하겠습니까?" -#. explain consequences of a decision -#: src/lib/installation/proposal_runner.rb:214 +#. explain consequences of a decision +#: src/lib/installation/proposal_runner.rb:214 msgid "You will lose all changes." msgstr "모든 변경사항을 적용하지 않습니다." -#. message show when user has disabled the configuration -#: src/lib/installation/proposal_runner.rb:260 +#. message show when user has disabled the configuration +#: src/lib/installation/proposal_runner.rb:260 msgid "Skipping configuration upon user request" msgstr "사용자 요청에 따라 하드웨어 구성을 생략중" -#. error message is a popup -#: src/lib/installation/proposal_runner.rb:282 +#. error message is a popup +#: src/lib/installation/proposal_runner.rb:282 msgid "" "The proposal contains an error that must be\n" "resolved before continuing.\n" @@ -2037,26 +1973,26 @@ "제안은 계속하기 전에 분석되어만 하는\n" "하나의 에러를 포함합니다.\n" -#. busy message -#: src/lib/installation/proposal_runner.rb:404 +#. busy message +#: src/lib/installation/proposal_runner.rb:404 msgid "Adapting the proposal to the current settings..." msgstr "제안사항을 현재 설정에 반영 중..." -#. busy message; -#. Initial contents of proposal subwindow while proposals are calculated -#: src/lib/installation/proposal_runner.rb:408 -#: src/lib/installation/proposal_runner.rb:695 +#. busy message; +#. Initial contents of proposal subwindow while proposals are calculated +#: src/lib/installation/proposal_runner.rb:408 +#: src/lib/installation/proposal_runner.rb:695 msgid "Analyzing your system..." msgstr "시스템 분석중..." -#. fallback proposal, means usually an internal error -#: src/lib/installation/proposal_runner.rb:513 +#. fallback proposal, means usually an internal error +#: src/lib/installation/proposal_runner.rb:513 msgid "ERROR: No proposal" msgstr "오류: 제안 없음" -#. Submodules handle their own error reporting -#. text for a message box -#: src/lib/installation/proposal_runner.rb:554 +#. Submodules handle their own error reporting +#. text for a message box +#: src/lib/installation/proposal_runner.rb:554 msgid "" "Configuration saved.\n" "There were errors." @@ -2064,51 +2000,51 @@ "설정이 저장되었습니다.\n" "오류가 있습니다." -#. Check box: Skip all the configurations in this dialog - -#. do this later manually or not at all -#. Translators: About 40 characters max, -#. use newlines for longer translations. -#. radio button -#: src/lib/installation/proposal_runner.rb:649 +#. Check box: Skip all the configurations in this dialog - +#. do this later manually or not at all +#. Translators: About 40 characters max, +#. use newlines for longer translations. +#. radio button +#: src/lib/installation/proposal_runner.rb:649 msgid "&Skip Configuration" msgstr "구성 건너뛰기(&S)" -#. radio button -#: src/lib/installation/proposal_runner.rb:658 +#. radio button +#: src/lib/installation/proposal_runner.rb:658 msgid "&Use Following Configuration" msgstr "다음 설정 사용(&U)" -#. Help message between headline and installation proposal / settings summary. -#. May contain newlines, but don't make it very much longer than the original. -#: src/lib/installation/proposal_runner.rb:721 +#. Help message between headline and installation proposal / settings summary. +#. May contain newlines, but don't make it very much longer than the original. +#: src/lib/installation/proposal_runner.rb:721 msgid "Click a headline to make changes or use the \"Change...\" menu below." msgstr "헤드라인을 클릭하여 변경하거나 아래의 \"변경...\" 메뉴를 사용하십시오." -#: src/lib/installation/proposal_runner.rb:725 +#: src/lib/installation/proposal_runner.rb:725 msgid "Click a headline to make changes." msgstr "헤드라인을 클릭하여 변경하십시오." -#. menu button item -#: src/lib/installation/proposal_runner.rb:788 +#. menu button item +#: src/lib/installation/proposal_runner.rb:788 msgid "&Reset to defaults" msgstr "기본값으로 재설정(&R)" -#. FATE #120373 -#: src/lib/installation/proposal_runner.rb:810 +#. FATE #120373 +#: src/lib/installation/proposal_runner.rb:810 msgid "&Update" msgstr "업데이트(&U)" -#: src/lib/installation/proposal_runner.rb:810 +#: src/lib/installation/proposal_runner.rb:810 msgid "&Install" msgstr "설치(&I)" -#. @return [String] translated headline -#: src/lib/installation/proposal_store.rb:58 +#. @return [String] translated headline +#: src/lib/installation/proposal_store.rb:58 msgid "Installation Overview" msgstr "설치 개요" -#. General part of the help text for all types of proposals -#: src/lib/installation/proposal_store.rb:78 +#. General part of the help text for all types of proposals +#: src/lib/installation/proposal_store.rb:78 msgid "" "<p>\n" "Change the values by clicking on the respective headline\n" @@ -2120,8 +2056,8 @@ "<b>변경...</b> 메뉴를 사용해서 변경하십시오.\n" "</p>\n" -#. Help text for installation proposal, continued -#: src/lib/installation/proposal_store.rb:86 +#. Help text for installation proposal, continued +#: src/lib/installation/proposal_store.rb:86 msgid "" "<p>\n" "Your hard disk has not been modified yet. You can still safely abort.\n" @@ -2131,8 +2067,8 @@ "하드 디스크가 아직 수정되지 않았습니다. 안전하게 중단할 수 있습니다.\n" "</p>\n" -#. TRANSLATORS: Warning message, can be split to more lines if needed -#: src/lib/installation/proposal_store.rb:297 +#. TRANSLATORS: Warning message, can be split to more lines if needed +#: src/lib/installation/proposal_store.rb:297 msgid "" "This proposed setting is marked as read-only\n" "and cannot be changed." @@ -2140,23 +2076,22 @@ "이 제안된 설정은 읽기 전용으로 표시되어 있으며\n" "변경할 수 없습니다." -#. Help text for installation proposal -#. General part ("You can change values...") is added as the next paragraph. -#: src/lib/installation/proposal_store.rb:518 +#. Help text for installation proposal +#. General part ("You can change values...") is added as the next paragraph. +#: src/lib/installation/proposal_store.rb:518 msgid "" "<p>\n" -"Select <b>Install</b> to perform a new installation with the values " -"displayed.\n" +"Select <b>Install</b> to perform a new installation with the values displayed.\n" "</p>\n" msgstr "" "<p>\n" "표시된 값으로 새로 설치하려면 <b>설치</b>를 선택하십시오.\n" "</p>\n" -#. so update -#. Help text for update proposal -#. General part ("You can change values...") is added as the next paragraph. -#: src/lib/installation/proposal_store.rb:526 +#. so update +#. Help text for update proposal +#. General part ("You can change values...") is added as the next paragraph. +#: src/lib/installation/proposal_store.rb:526 msgid "" "<p>\n" "Select <b>Update</b> to perform an update with the values displayed.\n" @@ -2166,9 +2101,9 @@ "표시된 값으로 업데이트하려면 <b>업데이트</b>를 선택하십시오.\n" "</p>\n" -#. Help text for network configuration proposal -#. General part ("You can change values...") is added as the next paragraph. -#: src/lib/installation/proposal_store.rb:535 +#. Help text for network configuration proposal +#. General part ("You can change values...") is added as the next paragraph. +#: src/lib/installation/proposal_store.rb:535 msgid "" "<p>\n" "Put the network settings into effect by pressing <b>Next</b>.\n" @@ -2178,9 +2113,9 @@ "<b>다음</b>를 눌러서 네트워크 설정을 유효화 하십시오.\n" "</p>\n" -#. Help text for service configuration proposal -#. General part ("You can change values...") is added as the next paragraph. -#: src/lib/installation/proposal_store.rb:543 +#. Help text for service configuration proposal +#. General part ("You can change values...") is added as the next paragraph. +#: src/lib/installation/proposal_store.rb:543 msgid "" "<p>\n" "Put the service settings into effect by pressing <b>Next</b>.\n" @@ -2190,9 +2125,9 @@ "<b>다음</b>을 눌러 서비스 설정을 실행하십시오.\n" "</p>\n" -#. Help text for hardware configuration proposal -#. General part ("You can change values...") is added as the next paragraph. -#: src/lib/installation/proposal_store.rb:551 +#. Help text for hardware configuration proposal +#. General part ("You can change values...") is added as the next paragraph. +#: src/lib/installation/proposal_store.rb:551 msgid "" "<p>\n" "Put the hardware settings into effect by pressing <b>Next</b>.\n" @@ -2202,13 +2137,13 @@ "<b>다음</b>를 눌러서 하드웨어 설정을 유효화 하십시오.\n" "</p>\n" -#. Proposal in uml module -#: src/lib/installation/proposal_store.rb:558 +#. Proposal in uml module +#: src/lib/installation/proposal_store.rb:558 msgid "<P><B>UML Installation Proposal</B></P>" msgstr "<P><B>UML 설치 제안</B></P>" -#. help text -#: src/lib/installation/proposal_store.rb:560 +#. help text +#: src/lib/installation/proposal_store.rb:560 msgid "" "<P>UML (User Mode Linux) installation allows you to start independent\n" "Linux virtual machines in the host system.</P>" @@ -2216,10 +2151,10 @@ "<P>UML(User Mode Linux) 설치를 사용하면 호스트 시스템에서\n" "독립 Linux 가상 컴퓨터를 시작할 수 있습니다.</P>" -#. Generic help text for other proposals (not basic installation or -#. hardhware configuration. -#. General part ("You can change values...") is added as the next paragraph. -#: src/lib/installation/proposal_store.rb:574 +#. Generic help text for other proposals (not basic installation or +#. hardhware configuration. +#. General part ("You can change values...") is added as the next paragraph. +#: src/lib/installation/proposal_store.rb:574 msgid "" "<p>\n" "To use the settings as displayed, press <b>Next</b>.\n" @@ -2229,164 +2164,158 @@ "보이는 설정을 사용하려면 <b>다음</b>를 누르십시오.\n" "</p>\n" -#. Text to display -#. -#. @return String -#: src/lib/installation/remote_finish_client.rb:67 +#. Text to display +#. +#. @return String +#: src/lib/installation/remote_finish_client.rb:67 msgid "Enabling remote administration..." msgstr "원격 관리 활성화 중..." -#. A Continue-Cancel popup -#: src/lib/installation/select_system_role.rb:97 +#. A Continue-Cancel popup +#: src/lib/installation/select_system_role.rb:97 msgid "Changing the system role may undo adjustments you may have done." msgstr "시스템 역할을 변경하면 수행한 조정이 실행 취소될 수 있습니다." -#. Writes configuration -#. -#. It creates a snapshot when no second stage is required and -#. Snapper is configured. -#. -#. @return [TrueClass,FalseClass] True if snapshot was created; -#. otherwise it returns false. -#: src/lib/installation/snapshots_finish.rb:41 +#. Writes configuration +#. +#. It creates a snapshot when no second stage is required and +#. Snapper is configured. +#. +#. @return [TrueClass,FalseClass] True if snapshot was created; +#. otherwise it returns false. +#: src/lib/installation/snapshots_finish.rb:41 msgid "Creating root filesystem snapshot..." msgstr "루트 파일 시스템 스냅샷 생성 중..." -#. TRANSLATORS: label for filesystem snapshot taken after system update -#: src/lib/installation/snapshots_finish.rb:49 +#. TRANSLATORS: label for filesystem snapshot taken after system update +#: src/lib/installation/snapshots_finish.rb:49 msgid "after update" msgstr "업데이트 후" -#. TRANSLATORS: label for filesystem snapshot taken after system installation -#: src/lib/installation/snapshots_finish.rb:56 +#. TRANSLATORS: label for filesystem snapshot taken after system installation +#: src/lib/installation/snapshots_finish.rb:56 msgid "after installation" msgstr "설치 후" -#. TRANSLATORS: default name for a found Linux system (we don't know if -#. it's an openSUSE, Ubuntu...) -#: src/lib/installation/ssh_config.rb:64 +#. TRANSLATORS: default name for a found Linux system (we don't know if +#. it's an openSUSE, Ubuntu...) +#: src/lib/installation/ssh_config.rb:64 msgid "Linux" msgstr "Linux" -#. Build a formatted summary based on the status of the importer -#. -#. @return [String] HTML formatted summary. -#: src/lib/installation/ssh_importer_presenter.rb:45 +#. Build a formatted summary based on the status of the importer +#. +#. @return [String] HTML formatted summary. +#: src/lib/installation/ssh_importer_presenter.rb:45 msgid "No previous Linux installation found" msgstr "발견된 이전 Linux 설치 없음" -#: src/lib/installation/ssh_importer_presenter.rb:47 +#: src/lib/installation/ssh_importer_presenter.rb:47 msgid "No existing SSH host keys will be copied" msgstr "기존 SSH 호스트 키가 복사되지 않음" -#. TRANSLATORS: %s is the name of a Linux system found in the hard -#. disk, like 'openSUSE 13.2' -#: src/lib/installation/ssh_importer_presenter.rb:54 +#. TRANSLATORS: %s is the name of a Linux system found in the hard +#. disk, like 'openSUSE 13.2' +#: src/lib/installation/ssh_importer_presenter.rb:54 msgid "SSH host keys and configuration will be copied from %s" msgstr "SSH 호스트 키 및 구성이 %s에서 복사됨" -#. TRANSLATORS: %s is the name of a Linux system found in the hard -#. disk, like 'openSUSE 13.2' -#: src/lib/installation/ssh_importer_presenter.rb:58 +#. TRANSLATORS: %s is the name of a Linux system found in the hard +#. disk, like 'openSUSE 13.2' +#: src/lib/installation/ssh_importer_presenter.rb:58 msgid "SSH host keys will be copied from %s" msgstr "SSH 호스트 키가 %s에서 복사됨" -#. autoyast tried to read a file but had no success. -#: src/lib/transfer/file_from_url.rb:156 +#. autoyast tried to read a file but had no success. +#: src/lib/transfer/file_from_url.rb:156 msgid "Cannot find URL '%1' via protocol HTTP(S). Server returned code %2." -msgstr "" -"HTTP(S) 프로토콜을 통해 '%1' URL을 찾을 수 없습니다. 서버에서 %2 코드를 반환" -"했습니다." +msgstr "HTTP(S) 프로토콜을 통해 '%1' URL을 찾을 수 없습니다. 서버에서 %2 코드를 반환했습니다." -#. autoyast tried to read a file but had no success. -#: src/lib/transfer/file_from_url.rb:176 +#. autoyast tried to read a file but had no success. +#: src/lib/transfer/file_from_url.rb:176 msgid "Cannot find URL '%1' via protocol FTP. Server returned code %2." -msgstr "" -"FTP 프로토콜을 통해 '%1' URL을 찾을 수 없습니다. 서버에서 %2 코드를 반환했습" -"니다." +msgstr "FTP 프로토콜을 통해 '%1' URL을 찾을 수 없습니다. 서버에서 %2 코드를 반환했습니다." -#. FIXME: I have doubts this will ever work. Too early. -#: src/lib/transfer/file_from_url.rb:192 +#. FIXME: I have doubts this will ever work. Too early. +#: src/lib/transfer/file_from_url.rb:192 msgid "Reading file on %1/%2 failed.\n" msgstr "%1/%2에서 파일을 읽는 데 실패했습니다.\n" -#: src/lib/transfer/file_from_url.rb:208 +#: src/lib/transfer/file_from_url.rb:208 msgid "Reading file on %1 failed.\n" msgstr "%1에서 파일을 읽는 데 실패했습니다.\n" -#. autoyast tried to mount the CD but had no success. -#. autoyast tried to mount a NFS directory which failed -#. autoyast tried to mount a NFS directory which failed -#: src/lib/transfer/file_from_url.rb:271 -#: src/lib/transfer/file_from_url.rb:327 -#: src/lib/transfer/file_from_url.rb:371 +#. autoyast tried to mount the CD but had no success. +#. autoyast tried to mount a NFS directory which failed +#. autoyast tried to mount a NFS directory which failed +#: src/lib/transfer/file_from_url.rb:271 src/lib/transfer/file_from_url.rb:327 +#: src/lib/transfer/file_from_url.rb:371 msgid "Mounting %1 failed." msgstr "%1을(를) 마운트하는 데 실패했습니다." -#. autoyast tried to read a file but had no success. -#: src/lib/transfer/file_from_url.rb:302 +#. autoyast tried to read a file but had no success. +#: src/lib/transfer/file_from_url.rb:302 msgid "Reading a file on CD failed. Path: %1/%2." msgstr "CD에서 파일을 읽는 데 실패했습니다. 경로: %1/%2." -#. autoyast tried to copy a file via NFS which failed -#. autoyast tried to copy a file via NFS which failed -#: src/lib/transfer/file_from_url.rb:350 -#: src/lib/transfer/file_from_url.rb:394 +#. autoyast tried to copy a file via NFS which failed +#. autoyast tried to copy a file via NFS which failed +#: src/lib/transfer/file_from_url.rb:350 src/lib/transfer/file_from_url.rb:394 msgid "Remote file %1 cannot be retrieved" msgstr "%1 원격 파일을 검색할 수 없습니다." -#. this is workaround for bnc#849767 -#. because of changes in autoyast startup this code is now -#. called much sooner (before Storage stuff is initialized) -#. call dummy method to trigger Storage initialization -#: src/lib/transfer/file_from_url.rb:519 +#. this is workaround for bnc#849767 +#. because of changes in autoyast startup this code is now +#. called much sooner (before Storage stuff is initialized) +#. call dummy method to trigger Storage initialization +#: src/lib/transfer/file_from_url.rb:519 msgid "%1 is not mounted and mount failed" msgstr "%1은(는) 마운트되지 않았으며 마운트에 실패했습니다." -#. autoyast tried to copy a file but that file can't be found -#: src/lib/transfer/file_from_url.rb:539 +#. autoyast tried to copy a file but that file can't be found +#: src/lib/transfer/file_from_url.rb:539 msgid "File %1 cannot be found" msgstr "%1 파일을 찾을 수 없습니다." -#. Device -#: src/lib/transfer/file_from_url.rb:561 +#. Device +#: src/lib/transfer/file_from_url.rb:561 msgid "Cannot find URL '%1' via protocol TFTP." msgstr "TFTP 프로토콜을 통해 '%1' URL을 찾을 수 없습니다." -#. the user wanted autoyast to fetch it's profile via an unknown protocol -#: src/lib/transfer/file_from_url.rb:568 +#. the user wanted autoyast to fetch it's profile via an unknown protocol +#: src/lib/transfer/file_from_url.rb:568 msgid "Unknown protocol %1." msgstr "알 수 없는 프로토콜 %1." -#. checking whether images are supported -#. BNC #409927 -#. Checking files for signatures -#: src/modules/ImageInstallation.rb:841 +#. checking whether images are supported +#. BNC #409927 +#. Checking files for signatures +#: src/modules/ImageInstallation.rb:841 msgid "Failed to read information about installation images" msgstr "설치 이미지에 대한 정보를 읽지 못했습니다." -#. count megabytes -#: src/modules/ImageInstallation.rb:1192 +#. count megabytes +#: src/modules/ImageInstallation.rb:1192 msgid "Deploying..." msgstr "배포하는 중..." -#. Function stores all new/requested states of all handled/supported types. -#. -#. @see #all_supported_types -#. @see #objects_state -#: src/modules/ImageInstallation.rb:1215 +#. Function stores all new/requested states of all handled/supported types. +#. +#. @see #all_supported_types +#. @see #objects_state +#: src/modules/ImageInstallation.rb:1215 msgid "Storing user preferences..." msgstr "사용자 기본 설정 저장 중..." -#. Restores packages statuses from 'objects_state': Selects packages for removal, installation, upgrade. -#. -#. @return [Boolean] if successful -#: src/modules/ImageInstallation.rb:1347 +#. Restores packages statuses from 'objects_state': Selects packages for removal, installation, upgrade. +#. +#. @return [Boolean] if successful +#: src/modules/ImageInstallation.rb:1347 msgid "Restoring user preferences..." msgstr "사용자 기본 설정 복원 중..." -#. Error message -#: src/modules/ImageInstallation.rb:1444 +#. Error message +#: src/modules/ImageInstallation.rb:1444 msgid "" "Installation was unable to solve package dependencies automatically.\n" "Software manager will be opened for you to solve them manually." Modified: branches/SLE12-SP3/yast/ko/po/instserver.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/instserver.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/instserver.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,71 +14,71 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. repository overview - %1 is product name (e.g. "SUSE LINUX Version 10.0") -#: src/include/instserver/complex.rb:78 +#. repository overview - %1 is product name (e.g. "SUSE LINUX Version 10.0") +#: src/include/instserver/complex.rb:78 msgid "Label: %1" msgstr "레이블: %1" -#. yes/no string displayed in the overview -#: src/include/instserver/complex.rb:87 +#. yes/no string displayed in the overview +#: src/include/instserver/complex.rb:87 msgid "Announce Using SLP: %1" msgstr "SLP를 사용하여 알림: %1" -#: src/include/instserver/complex.rb:88 +#: src/include/instserver/complex.rb:88 msgid "Yes" msgstr "확인" -#: src/include/instserver/complex.rb:88 +#: src/include/instserver/complex.rb:88 msgid "No" msgstr "취소" -#. Instserver overview dialog caption -#: src/include/instserver/complex.rb:119 +#. Instserver overview dialog caption +#: src/include/instserver/complex.rb:119 msgid "Installation Server" msgstr "설치 서버" -#. menu item -#: src/include/instserver/complex.rb:122 +#. menu item +#: src/include/instserver/complex.rb:122 msgid "&Server Configuration..." msgstr "서버 구성(&S)..." -#. table header -#: src/include/instserver/complex.rb:130 +#. table header +#: src/include/instserver/complex.rb:130 msgid "Configuration" msgstr "구성" -#: src/include/instserver/complex.rb:130 +#: src/include/instserver/complex.rb:130 msgid "Product" msgstr "제품" -#. CD Popup -#. @param string popup message -#. @param boolean true if ISO -#. @return [Object] -#: src/include/instserver/dialogs.rb:49 +#. CD Popup +#. @param string popup message +#. @param boolean true if ISO +#. @return [Object] +#: src/include/instserver/dialogs.rb:49 msgid "Change Media" msgstr "미디어 변경" -#. %1 is the current cd number -#: src/include/instserver/dialogs.rb:230 +#. %1 is the current cd number +#: src/include/instserver/dialogs.rb:230 msgid "Insert CD %1 then press continue." msgstr "%1 CD를 삽입하고 계속을 누르십시오." -#: src/include/instserver/dialogs.rb:235 +#: src/include/instserver/dialogs.rb:235 msgid "Select ISO image %1 then press continue." msgstr "%1 ISO 이미지를 선택하고 계속을 누르십시오." -#. %2 is the product name and version -#: src/include/instserver/dialogs.rb:241 +#. %2 is the product name and version +#: src/include/instserver/dialogs.rb:241 msgid "Insert CD %1 of %2." msgstr "%1 CD(%2의)를 삽입하십시오." -#: src/include/instserver/dialogs.rb:242 +#: src/include/instserver/dialogs.rb:242 msgid "Select ISO image %1 of %2." msgstr "%1 ISO 이미지(%2의)를 선택하십시오." -#. popup request, %1 is CD medium name -#: src/include/instserver/dialogs.rb:281 +#. popup request, %1 is CD medium name +#: src/include/instserver/dialogs.rb:281 msgid "" "Insert\n" "%1" @@ -86,13 +86,13 @@ "%1\n" "삽입" -#. popup request, %1 is ISO name -#: src/include/instserver/dialogs.rb:310 +#. popup request, %1 is ISO name +#: src/include/instserver/dialogs.rb:310 msgid "Select %1" msgstr "%1 선택" -#. add-on medium (e.g. service pack) doesn't match configured repository -#: src/include/instserver/dialogs.rb:551 +#. add-on medium (e.g. service pack) doesn't match configured repository +#: src/include/instserver/dialogs.rb:551 msgid "" "The medium requires product %1, which is not provided\n" "by the current repository.\n" @@ -104,64 +104,64 @@ "\n" "먼저 기본 제품 매체를 선택하십시오." -#. else, we create CD1, CD2, etc. (for code10 always) -#: src/include/instserver/dialogs.rb:669 +#. else, we create CD1, CD2, etc. (for code10 always) +#: src/include/instserver/dialogs.rb:669 msgid "Copying CD contents to local directory" msgstr "CD 내용을 로컬 디렉토리로 복사" -#: src/include/instserver/dialogs.rb:670 +#: src/include/instserver/dialogs.rb:670 msgid "This may take a while..." msgstr "약간의 시간이 소요될 수 있습니다." -#. TODO: report more details (stderr) -#. rename the directory -#: src/include/instserver/dialogs.rb:727 src/modules/Instserver.rb:1341 +#. TODO: report more details (stderr) +#. rename the directory +#: src/include/instserver/dialogs.rb:727 src/modules/Instserver.rb:1341 msgid "Error while moving repository content." msgstr "리포지토리 컨텐트를 이동하는 중에 오류가 발생했습니다." -#. Instserver configuration dialog caption -#. Instserver configuration dialog caption +#. Instserver configuration dialog caption +#. Instserver configuration dialog caption #: src/include/instserver/dialogs.rb:949 -#: src/include/instserver/dialogs.rb:1162 +#: src/include/instserver/dialogs.rb:1162 msgid "Repository Configuration" msgstr "리포지토리 구성" -#. Instserver configure1 dialog contents -#: src/include/instserver/dialogs.rb:965 +#. Instserver configure1 dialog contents +#: src/include/instserver/dialogs.rb:965 msgid "Read &CD or DVD Medium" msgstr "CD 또는 DVD 미디어 읽기(&C)" -#: src/include/instserver/dialogs.rb:971 +#: src/include/instserver/dialogs.rb:971 msgid "Data &Source" msgstr "데이터 소스(&S)" -#: src/include/instserver/dialogs.rb:979 +#: src/include/instserver/dialogs.rb:979 msgid "Use &ISO Images" msgstr "ISO 이미지 사용(&I)" -#: src/include/instserver/dialogs.rb:988 +#: src/include/instserver/dialogs.rb:988 msgid "Di&rectory with CD Images:" msgstr "CD 이미지가 있는 디렉토리(&R):" #: src/include/instserver/dialogs.rb:991 -#: src/include/instserver/dialogs.rb:1371 +#: src/include/instserver/dialogs.rb:1371 msgid "Select &Directory" msgstr "디렉토리 선택(&D)" -#. abort? -#. abort? -#: src/include/instserver/dialogs.rb:1034 -#: src/include/instserver/dialogs.rb:1440 +#. abort? +#. abort? +#: src/include/instserver/dialogs.rb:1034 +#: src/include/instserver/dialogs.rb:1440 msgid "Select Directory" msgstr "디렉토리 선택" -#. abort? -#: src/include/instserver/dialogs.rb:1051 -#: src/include/instserver/dialogs.rb:1215 +#. abort? +#: src/include/instserver/dialogs.rb:1051 +#: src/include/instserver/dialogs.rb:1215 msgid "Installation server name missing." msgstr "설치 서버 이름이 누락되었습니다." -#: src/include/instserver/dialogs.rb:1066 +#: src/include/instserver/dialogs.rb:1066 msgid "" "Contents already exist in this directory.\n" "Not copying CDs." @@ -169,8 +169,8 @@ "이 디렉토리에는 이미 내용이 있습니다.\n" "CD를 복사하지 않습니다." -#. for translators: popup question (prefer more shorter lines than few long lines) -#: src/include/instserver/dialogs.rb:1094 +#. for translators: popup question (prefer more shorter lines than few long lines) +#: src/include/instserver/dialogs.rb:1094 msgid "" "Add an additional product (Service Pack, Additional\n" "Package CD, etc.) to the repository?" @@ -178,21 +178,21 @@ "리포지토리에 다른 제품(서비스 팩, 추가 패키지\n" "CD 등)을 추가하시겠습니까?" -#. Instserver configure1 dialog contents -#: src/include/instserver/dialogs.rb:1170 +#. Instserver configure1 dialog contents +#: src/include/instserver/dialogs.rb:1170 msgid "Repository &Name:" msgstr "리포지토리 이름(&N):" -#: src/include/instserver/dialogs.rb:1175 +#: src/include/instserver/dialogs.rb:1175 msgid "A&nnounce as Installation Service with SLP" msgstr "SLP를 통해 설치 서비스로서 알림(&N)" -#: src/include/instserver/dialogs.rb:1223 +#: src/include/instserver/dialogs.rb:1223 msgid "Invalid repository name." msgstr "잘못된 리포지토리 이름입니다." -#. an error message - entered repository name already exists -#: src/include/instserver/dialogs.rb:1231 +#. an error message - entered repository name already exists +#: src/include/instserver/dialogs.rb:1231 msgid "" "Repository '%1' already exists,\n" "enter another name." @@ -200,8 +200,8 @@ "'%1' 리포지토리는 이미 있습니다.\n" "다른 이름을 입력하십시오." -#. create directory only for a new repository -#: src/include/instserver/dialogs.rb:1244 +#. create directory only for a new repository +#: src/include/instserver/dialogs.rb:1244 msgid "" "Error while creating <tt>repository</tt> directory.\n" "Verify that the directory \n" @@ -213,8 +213,8 @@ "%1 디렉토리가 쓰기 가능한지 확인한 후\n" "다시 시도하십시오.\n" -#. confirm removal of a repository, the action is done immediately and cannot be reverted -#: src/include/instserver/dialogs.rb:1263 +#. confirm removal of a repository, the action is done immediately and cannot be reverted +#: src/include/instserver/dialogs.rb:1263 msgid "" "Repository '%1' has been marked to delete.\n" "When adding a new repository with the same name\n" @@ -228,93 +228,93 @@ "\n" "이전 컨텐트를 삭제하고 처음부터 생성하시겠습니까?" -#. Instserver server dialog caption -#: src/include/instserver/dialogs.rb:1347 +#. Instserver server dialog caption +#: src/include/instserver/dialogs.rb:1347 msgid "Initial Setup -- Initial Setup" msgstr "초기 설정 -- 초기 설정" -#: src/include/instserver/dialogs.rb:1363 +#: src/include/instserver/dialogs.rb:1363 msgid "Do Not Configure Any Net&work Services" msgstr "네트워크 서비스를 구성하지 않음(&W)" -#: src/include/instserver/dialogs.rb:1368 +#: src/include/instserver/dialogs.rb:1368 msgid "Di&rectory to Contain Repositories:" msgstr "리포지토리를 포함할 디렉토리(&R):" -#. radio button label -#: src/include/instserver/dialogs.rb:1383 +#. radio button label +#: src/include/instserver/dialogs.rb:1383 msgid "&Configure as HTTP Repository" msgstr "HTTP 리포지토리로 구성(&C)" -#. radio button label -#: src/include/instserver/dialogs.rb:1391 +#. radio button label +#: src/include/instserver/dialogs.rb:1391 msgid "&Configure as FTP Repository" msgstr "FTP 리포지토리로 구성(&C)" -#. radio button label -#: src/include/instserver/dialogs.rb:1399 +#. radio button label +#: src/include/instserver/dialogs.rb:1399 msgid "&Configure as NFS Repository" msgstr "NFS 리포지토리로 구성(&C)" -#: src/include/instserver/dialogs.rb:1451 +#: src/include/instserver/dialogs.rb:1451 msgid "Directory path for the installation server missing." msgstr "설치 서버에 대한 디렉토리 경로가 누락되었습니다." -#. Instserver configure2 dialog caption -#: src/include/instserver/dialogs.rb:1478 +#. Instserver configure2 dialog caption +#: src/include/instserver/dialogs.rb:1478 msgid "Installation Server -- NFS" msgstr "설치 서버 -- NFS" -#. Instserver nfs dialog contents -#: src/include/instserver/dialogs.rb:1496 +#. Instserver nfs dialog contents +#: src/include/instserver/dialogs.rb:1496 msgid "&Host Wild Card" msgstr "호스트 와일드카드(&H)" -#: src/include/instserver/dialogs.rb:1498 +#: src/include/instserver/dialogs.rb:1498 msgid "&Options" msgstr "옵션(&O)" -#. store the firewall setting, (activation is in SetupNFS()) -#: src/include/instserver/dialogs.rb:1556 +#. store the firewall setting, (activation is in SetupNFS()) +#: src/include/instserver/dialogs.rb:1556 msgid "Error occurred while configuring NFS." msgstr "NFS를 구성하는 동안 오류가 발생했습니다." -#. Instserver configure2 dialog caption -#: src/include/instserver/dialogs.rb:1588 +#. Instserver configure2 dialog caption +#: src/include/instserver/dialogs.rb:1588 msgid "Installation Server -- FTP" msgstr "설치 서버 -- FTP" -#. Instserver nfs dialog contents -#: src/include/instserver/dialogs.rb:1596 +#. Instserver nfs dialog contents +#: src/include/instserver/dialogs.rb:1596 msgid "&FTP Server Root Directory:" msgstr "FTP 서버 루트 디렉토리(&F):" -#: src/include/instserver/dialogs.rb:1598 +#: src/include/instserver/dialogs.rb:1598 msgid "&Directory Alias:" msgstr "디렉토리 별칭(&D):" -#. store the firewall setting, (activation is in SetupFTP()) -#: src/include/instserver/dialogs.rb:1655 +#. store the firewall setting, (activation is in SetupFTP()) +#: src/include/instserver/dialogs.rb:1655 msgid "Error occurred while configuring FTP." msgstr "FTP를 구성하는 동안 오류가 발생했습니다." -#. Instserver configure2 dialog caption -#: src/include/instserver/dialogs.rb:1675 +#. Instserver configure2 dialog caption +#: src/include/instserver/dialogs.rb:1675 msgid "Installation Server -- HTTP" msgstr "설치 서버 -- HTTP" -#. Instserver nfs dialog contents -#: src/include/instserver/dialogs.rb:1691 +#. Instserver nfs dialog contents +#: src/include/instserver/dialogs.rb:1691 msgid "&Directory Alias" msgstr "디렉토리 별칭(&D)" -#. store the firewall setting, (activation is in SetupHTTP()) -#: src/include/instserver/dialogs.rb:1748 +#. store the firewall setting, (activation is in SetupHTTP()) +#: src/include/instserver/dialogs.rb:1748 msgid "Error creating HTTPD configuration." msgstr "HTTPD 구성을 작성하는 동안 오류가 발생했습니다." -#. All helps are here -#: src/include/instserver/helps.rb:16 +#. All helps are here +#: src/include/instserver/helps.rb:16 msgid "" "<p><b><big>Network Server Configuration</big></b><br>\n" "</p>" @@ -322,7 +322,7 @@ "<p><b><big>네트워크 서버 구성</big></b><br>\n" "</p>" -#: src/include/instserver/helps.rb:19 +#: src/include/instserver/helps.rb:19 msgid "" "<p>Select one of the server options and specify where all the repositories\n" "should be hosted on the local system.\n" @@ -332,7 +332,7 @@ "위치를 지정하십시오.\n" "</p>" -#: src/include/instserver/helps.rb:24 +#: src/include/instserver/helps.rb:24 msgid "" "<p>If you have one of the services already running and want to do the\n" "server configuration manually, select not to configure \n" @@ -344,7 +344,7 @@ " 옵션을 선택하십시오.\n" " </p>\n" -#: src/include/instserver/helps.rb:30 +#: src/include/instserver/helps.rb:30 msgid "" "<p><b><big>NFS Server Configuration</big></b><br>\n" "</p>" @@ -352,7 +352,7 @@ "<p><b><big>NFS 서버 구성</big></b><br>\n" "</p>" -#: src/include/instserver/helps.rb:33 +#: src/include/instserver/helps.rb:33 msgid "" "<p>To complete this configuration, a new entry in the file\n" "<em>/etc/exports</em> must be added and the NFS server must be \n" @@ -364,33 +364,29 @@ " 설치 및 시작해야 합니다.\n" " </p>\n" -#: src/include/instserver/helps.rb:39 +#: src/include/instserver/helps.rb:39 msgid "" "<p>If you need to restrict access to the exported directories to certain \n" -"hosts, add a more restrictive wild card mask. For example, use " -"<em>192.168.1.0/24</em>\n" +"hosts, add a more restrictive wild card mask. For example, use <em>192.168.1.0/24</em>\n" "to restrict access to the <em>192.168.1.0</em> subnet.\n" "</p>\n" msgstr "" "<p>엑스포트한 디렉토리에 대한 액세스를 특정 호스트로 제한해야 할 경우 \n" -"제한하는 와일드카드 마스크를 더 추가하십시오. 예를 들어 <em>192.168.1.0</em> " -"서브넷에 대한\n" +"제한하는 와일드카드 마스크를 더 추가하십시오. 예를 들어 <em>192.168.1.0</em> 서브넷에 대한\n" " 액세스를 제한하려면 <em>192.168.1.0/24</em>를 사용하십시오.\n" " </p>\n" -#: src/include/instserver/helps.rb:45 +#: src/include/instserver/helps.rb:45 msgid "" -"<p>Additionally, set the export options. For more details about the " -"available\n" +"<p>Additionally, set the export options. For more details about the available\n" "options, see the manual page for <em>exports</em> (man exports(5))\n" "</p>\n" msgstr "" -"<p>추가로 엑스포트 옵션을 설정하십시오. 사용 가능한 옵션에 대한 자세한 내용" -"은\n" +"<p>추가로 엑스포트 옵션을 설정하십시오. 사용 가능한 옵션에 대한 자세한 내용은\n" "설명서의 <em>exports</em>(man exports(5))에 대한 페이지를 참조하십시오.\n" " </p>\n" -#: src/include/instserver/helps.rb:50 +#: src/include/instserver/helps.rb:50 msgid "" "<p>The repository will be available at the following URL:\n" "<tt>nfs://Host_IP/Repository_Name</tt></p>" @@ -398,7 +394,7 @@ "<p>다음 URL에서 리포지토리를 사용할 수 있습니다.\n" "<tt>nfs://호스트 IP/리포지토리 이름</tt></p>" -#: src/include/instserver/helps.rb:53 +#: src/include/instserver/helps.rb:53 msgid "" "<p><b><big>FTP Server Configuration</big></b><br>\n" "</p>" @@ -406,7 +402,7 @@ "<p><b><big>FTP 서버 구성</big></b><br>\n" "</p>" -#: src/include/instserver/helps.rb:56 +#: src/include/instserver/helps.rb:56 msgid "" "<p>To complete this configuration, an FTP server must be \n" "installed and started.</p>\n" @@ -414,7 +410,7 @@ "<p>이 구성을 완료하려면 FTP 서버를 설치 및 \n" "시작해야 합니다.</p>\n" -#: src/include/instserver/helps.rb:59 +#: src/include/instserver/helps.rb:59 msgid "" "<p>If the chosen software repository directory is outside\n" "the FTP server hierarchy, a mount entry is added to <tt>/etc/fstab</tt>.\n" @@ -424,21 +420,19 @@ msgstr "" "<p>선택한 소프트웨어 리포지토리 디렉토리가 FTP 서버 계층\n" "외부에 있는 경우, <tt>/etc/fstab</tt>에 탑재 항목이 추가됩니다.\n" -"이렇게 하면 FTP 서버에서 소프트웨어 리포지토리 디렉토리를 사용할 수 있게 됩니" -"다\n" +"이렇게 하면 FTP 서버에서 소프트웨어 리포지토리 디렉토리를 사용할 수 있게 됩니다\n" "(<tt>mount</tt>의 <tt>--bind</tt> 옵션 사용).\n" "</p>\n" -#: src/include/instserver/helps.rb:66 +#: src/include/instserver/helps.rb:66 msgid "" -"<p>The installation server will be available to clients using the following " -"URL:\n" +"<p>The installation server will be available to clients using the following URL:\n" "</p>\n" msgstr "" "<p>다음 URL을 사용하면 클라이언트가 설치 서버를 이용할 수 있습니다:\n" "</p>\n" -#: src/include/instserver/helps.rb:69 +#: src/include/instserver/helps.rb:69 msgid "" "<p><tt>ftp://<Host IP>/<Repository Name></tt>\n" "</p>" @@ -446,7 +440,7 @@ "<p><tt>ftp://<호스트 IP>/<리포지토리 이름></tt>\n" "</p>" -#: src/include/instserver/helps.rb:70 +#: src/include/instserver/helps.rb:70 msgid "" "<p><b><big>HTTP Server Configuration</big></b><br>\n" "</p>" @@ -454,7 +448,7 @@ "<p><b><big>HTTP 서버 구성</big></b><br>\n" "</p>" -#: src/include/instserver/helps.rb:73 +#: src/include/instserver/helps.rb:73 msgid "" "<p>To complete this configuration, an HTTP server must be \n" "installed and started. The alias will be used to reference the installation\n" @@ -464,17 +458,15 @@ "시작해야 합니다. 설치 서버 루트 디렉토리를 참조하기 위해 별칭이\n" " 사용됩니다.</p>\n" -#: src/include/instserver/helps.rb:78 +#: src/include/instserver/helps.rb:78 msgid "" "<p>Select a short and easy to remember alias. For example, if you select\n" -"<em>SUSE</em> as the alias, the repositories will be available as shown " -"below:</p>\n" +"<em>SUSE</em> as the alias, the repositories will be available as shown below:</p>\n" msgstr "" "<p>짧고 기억하기 쉬운 별칭을 선택하십시오. 예를 들어 별칭으로\n" -"<em>SUSE</em>를 선택할 경우 아래 표시된 리포지토리를 사용할 수 있습니다.\n" +"<em>SUSE</em>를 선택할 경우 아래 표시된 리포지토리를 사용할 수 있습니다.</p>\n" -#: src/include/instserver/helps.rb:81 +#: src/include/instserver/helps.rb:81 msgid "" "<p><tt>http://<Host IP>/SUSE/<Repository Name></tt>\n" "</p>" @@ -482,7 +474,7 @@ "<p><tt>http://<호스트 IP>/SUSE/<리포지토리 이름></tt>\n" "</p>" -#: src/include/instserver/helps.rb:84 src/include/instserver/helps.rb:94 +#: src/include/instserver/helps.rb:84 src/include/instserver/helps.rb:94 msgid "" "<p><b>Configuration of the Repository</b><br>\n" "</p>\n" @@ -490,10 +482,9 @@ "<p><b>리포지토리 구성</b><br>\n" "</p>\n" -#: src/include/instserver/helps.rb:85 +#: src/include/instserver/helps.rb:85 msgid "" -"<p>The repository name is used to create a directory under which all " -"product\n" +"<p>The repository name is used to create a directory under which all product\n" "CDs are copied and managed. The repository is accessed using the\n" "configured protocol (NFS, FTP, or HTTP).</p> \n" msgstr "" @@ -501,58 +492,48 @@ "사용됩니다. 구성된 프로토콜(NFS, FTP 또는 HTTP)을 사용하여 \n" "리포지토리에 액세스할 수 있습니다.</p>\n" -#: src/include/instserver/helps.rb:90 +#: src/include/instserver/helps.rb:90 msgid "<p><b><big>SLP Support</big></b></p>" msgstr "<p><b><big>SLP 지원</big></b></p>" -#: src/include/instserver/helps.rb:91 +#: src/include/instserver/helps.rb:91 msgid "" -"<p>SLP (Service Location Protocol) facilitates finding an installation " -"server. \n" +"<p>SLP (Service Location Protocol) facilitates finding an installation server. \n" "If checked, the repository will be announced on the network using SLP.</p>\n" msgstr "" -"<p>SLP(Service Location Protocol)를 이용하면 설치 서버를 더 쉽게 찾을 수 있습" -"니다. \n" -"이 옵션을 선택하면 네트워크에서 리포지토리를 알리는 작업에 SLP가 사용됩니다." -"</p>\n" +"<p>SLP(Service Location Protocol)를 이용하면 설치 서버를 더 쉽게 찾을 수 있습니다. \n" +"이 옵션을 선택하면 네트워크에서 리포지토리를 알리는 작업에 SLP가 사용됩니다.</p>\n" -#: src/include/instserver/helps.rb:95 +#: src/include/instserver/helps.rb:95 msgid "" -"<p>Select a source drive from the list, insert the first medium of a base " -"product, and press\n" +"<p>Select a source drive from the list, insert the first medium of a base product, and press\n" "<b>Next</b> to copy the content into the local repository.</p>\n" msgstr "" -"<p>로컬 리포지토리로 내용을 복사하려면 목록에서 소스 드라이브를 선택하고, 기" -"본\n" +"<p>로컬 리포지토리로 내용을 복사하려면 목록에서 소스 드라이브를 선택하고, 기본\n" "제품의 첫 번째 미디어를 삽입하고, <b>다음</b>을 누르십시오.</p>\n" -#: src/include/instserver/helps.rb:98 +#: src/include/instserver/helps.rb:98 msgid "" -"<p>When the base media are copied to the local repository, you can add " -"additional\n" -"CDs to the repository (for example, Service Pack CDs or any add-on CDs).\n" +"<p>When the base media are copied to the local repository, you can add additional\n" +"CDs to the repository (for example, Service Pack CDs or any add-on CDs).</p>\n" msgstr "" -"<p>기본 미디어를 로컬 리포지토리에 복사한 경우, 서비스 팩 CD 또는 추가 기능 " -"CD와 같은 CD를 리포지토리에 추가할\n" +"<p>기본 미디어를 로컬 리포지토리에 복사한 경우, 서비스 팩 CD 또는 추가 기능 CD와 같은 CD를 리포지토리에 추가할\n" "수 있습니다.</p>\n" -#: src/include/instserver/helps.rb:101 +#: src/include/instserver/helps.rb:101 msgid "<p><b><big>ISO Images</big></b></p>" msgstr "<p><b><big>ISO 이미지</big></b></p>" -#: src/include/instserver/helps.rb:102 +#: src/include/instserver/helps.rb:102 msgid "" -"<p>ISO images can be used instead of CD or DVD media. If you press <b>Next, you can\n" +"<p>ISO images can be used instead of CD or DVD media. If you press <b>Next</b>, you can\n" "select ISO image files.</p>\n" msgstr "" -"<p>CD 또는 DVD 미디어 대신 ISO 이미지를 사용할 수 있습니다. <b>다음</b>을 누" -"르면 ISO 이미지\n" +"<p>CD 또는 DVD 미디어 대신 ISO 이미지를 사용할 수 있습니다. <b>다음</b>을 누르면 ISO 이미지\n" "파일을 선택할 수 있습니다.</p>\n" -#. Read dialog help 1/2 -#: src/include/instserver/helps.rb:106 +#. Read dialog help 1/2 +#: src/include/instserver/helps.rb:106 msgid "" "<p><b><big>Initializing Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -560,8 +541,8 @@ "<p><b><big>구성 초기화</big></b><br>\n" "잠시 기다려 주십시오.<br></p>\n" -#. Read dialog help 2/2 -#: src/include/instserver/helps.rb:110 +#. Read dialog help 2/2 +#: src/include/instserver/helps.rb:110 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -569,8 +550,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단합니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/instserver/helps.rb:114 +#. Write dialog help 1/2 +#: src/include/instserver/helps.rb:114 msgid "" "<p><b>Saving Repository Configuration</b><br>\n" "</p>\n" @@ -578,8 +559,8 @@ "<p><b>리포지토리 구성 저장</b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/instserver/helps.rb:118 +#. Write dialog help 2/2 +#: src/include/instserver/helps.rb:118 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -591,8 +572,8 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Summary dialog help 1/3 -#: src/include/instserver/helps.rb:125 +#. Summary dialog help 1/3 +#: src/include/instserver/helps.rb:125 msgid "" "<p><b>Repository Configuration</b><br>\n" "Configure the installation server here.<br></p>\n" @@ -600,24 +581,21 @@ "<p><b>리포지토리 구성</b><br>\n" "여기에 설치 서버를 구성합니다.<br></p>\n" -#. Summary dialog help 2/3 -#: src/include/instserver/helps.rb:129 +#. Summary dialog help 2/3 +#: src/include/instserver/helps.rb:129 msgid "" "<p><b>Adding a Repository:</b><br>\n" -"Unconfigured directories are detected in the repository directory and then " -"made \n" +"Unconfigured directories are detected in the repository directory and then made \n" "available for configuration.\n" -"To add a repository, select it from the list of unconfigured repositories " -"and press <b>Configure</b>.</p>\n" +"To add a repository, select it from the list of unconfigured repositories and press <b>Configure</b>.</p>\n" msgstr "" "<p><b>리포지토리 추가:</b><br>\n" "리포지토리 디렉토리에서 구성되지 않은 디렉토리를 감지하여 구성할 수 있도록 \n" "만듭니다.\n" -"리포지토리를 추가하려면 구성되지 않은 리포지토리 목록에서 하나를 선택하고 <b>" -"구성</b>을 누르십시오.</p>\n" +"리포지토리를 추가하려면 구성되지 않은 리포지토리 목록에서 하나를 선택하고 <b>구성</b>을 누르십시오.</p>\n" -#. Summary dialog help 3/3 -#: src/include/instserver/helps.rb:136 +#. Summary dialog help 3/3 +#: src/include/instserver/helps.rb:136 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -627,8 +605,8 @@ "<b>편집</b>을 누르면 구성을 변경할 수 있는 대화 상자가\n" "추가로 열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/instserver/helps.rb:142 +#. Ovreview dialog help 1/3 +#: src/include/instserver/helps.rb:142 msgid "" "<p><b>Repositories Overview</b><br>\n" "Get an overview of the configured repositories and edit their \n" @@ -638,8 +616,8 @@ "구성된 리포지토리 개요를 가져오고 필요한 경우 \n" "해당 구성을 편집하십시오.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/instserver/helps.rb:148 +#. Ovreview dialog help 2/3 +#: src/include/instserver/helps.rb:148 msgid "" "<p><b>Adding a Repository:</b><br>\n" "Press <b>Add</b> to configure a repository.</p>\n" @@ -647,8 +625,8 @@ "<p><b>리포지토리 추가:</b><br>\n" "<b>추가</b>를 눌러 리포지토리를 구성하십시오.</p>\n" -#. Ovreview dialog help 3/3 -#: src/include/instserver/helps.rb:152 +#. Ovreview dialog help 3/3 +#: src/include/instserver/helps.rb:152 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "Choose the repository you want to change or remove and\n" @@ -658,37 +636,35 @@ "변경 또는 제거할 리포지토리를 선택하고\n" "<b>편집</b> 또는 <b>삭제</b>를 누르십시오.</p>\n" -#. Read service data using _auto -#: src/modules/Instserver.rb:306 +#. Read service data using _auto +#: src/modules/Instserver.rb:306 msgid "" -"The FTP installation server requires an FTP server package. The vsftpd " -"package\n" +"The FTP installation server requires an FTP server package. The vsftpd package\n" "will now be installed.\n" msgstr "" "FTP 설치 서버에는 FTP 서버 패키지가 필요합니다. vsftpd 패키지는\n" "설치되지 않습니다.\n" -#. Write Apache config -#. @param string state : Yes/No -#. @return [void] -#: src/modules/Instserver.rb:450 +#. Write Apache config +#. @param string state : Yes/No +#. @return [void] +#: src/modules/Instserver.rb:450 msgid "Unable to write /etc/sysconfig/apache2" msgstr "/etc/sysconfig/apache2에 기록할 수 없습니다." -#: src/modules/Instserver.rb:458 +#: src/modules/Instserver.rb:458 msgid "" -"The HTTP installation server requires an HTTP server package. The apache2 " -"package\n" +"The HTTP installation server requires an HTTP server package. The apache2 package\n" "will now be installed." msgstr "" "HTTP 설치 서버에는 HTTP 서버 패키지가 필요합니다. apache2 패키지는\n" "설치되지 않습니다." -#. Setup NFS Server -#. @param string directory -#. @param [String] options -#. @return [Boolean] -#: src/modules/Instserver.rb:569 +#. Setup NFS Server +#. @param string directory +#. @param [String] options +#. @return [Boolean] +#: src/modules/Instserver.rb:569 msgid "" "Directory is already exported via NFS.\n" "Leave NFS exports unmodified?\n" @@ -696,73 +672,73 @@ "디렉토리는 NFS를 통해 이미 엑스포트되어 있습니다.\n" "NFS 엑스포트를 수정되지 않은 상태로 두시겠습니까?\n" -#. Instserver read dialog caption -#: src/modules/Instserver.rb:1155 +#. Instserver read dialog caption +#: src/modules/Instserver.rb:1155 msgid "Initializing Configuration" msgstr "구성 초기화" -#. Progress stage 1/2 -#: src/modules/Instserver.rb:1165 +#. Progress stage 1/2 +#: src/modules/Instserver.rb:1165 msgid "Read configuration file" msgstr "구성 파일 읽기" -#. Progress stage 2/2 -#: src/modules/Instserver.rb:1167 +#. Progress stage 2/2 +#: src/modules/Instserver.rb:1167 msgid "Search for a new repository" msgstr "새 리포지토리 검색" -#. Progress step 1/2 -#: src/modules/Instserver.rb:1171 +#. Progress step 1/2 +#: src/modules/Instserver.rb:1171 msgid "Reading configuration file..." msgstr "구성 파일 읽는 중..." -#. Progress step 2/2 -#: src/modules/Instserver.rb:1173 +#. Progress step 2/2 +#: src/modules/Instserver.rb:1173 msgid "Searching for a new repository..." msgstr "새 리포지토리 검색 중..." -#. Progress finished -#. Progress finished -#: src/modules/Instserver.rb:1175 src/modules/Instserver.rb:1260 +#. Progress finished +#. Progress finished +#: src/modules/Instserver.rb:1175 src/modules/Instserver.rb:1260 msgid "Finished" msgstr "완료됨" -#. TRANSLATORS: Error message -#: src/modules/Instserver.rb:1188 +#. TRANSLATORS: Error message +#: src/modules/Instserver.rb:1188 msgid "Cannot read current settings." msgstr "현재 설정을 읽을 수 없습니다." -#. Instserver read dialog caption -#: src/modules/Instserver.rb:1240 +#. Instserver read dialog caption +#: src/modules/Instserver.rb:1240 msgid "Saving Installation Server Configuration" msgstr "설치 서버 구성 저장" -#. Progress stage 1/2 -#: src/modules/Instserver.rb:1250 +#. Progress stage 1/2 +#: src/modules/Instserver.rb:1250 msgid "Write the settings" msgstr "설정 기록" -#. Progress stage 2/2 -#: src/modules/Instserver.rb:1252 +#. Progress stage 2/2 +#: src/modules/Instserver.rb:1252 msgid "Run SuSEconfig" msgstr "SuSEconfig 실행" -#. Progress step 1/2 -#: src/modules/Instserver.rb:1256 +#. Progress step 1/2 +#: src/modules/Instserver.rb:1256 msgid "Writing the settings..." msgstr "설정을 기록하는 중..." -#. Progress step 2/2 -#: src/modules/Instserver.rb:1258 +#. Progress step 2/2 +#: src/modules/Instserver.rb:1258 msgid "Running SuSEconfig..." msgstr "SuSEconfig 실행중입니다..." -#. Error message -#: src/modules/Instserver.rb:1274 +#. Error message +#: src/modules/Instserver.rb:1274 msgid "Cannot write settings." msgstr "설정을 기록할 수 없습니다." -#. Configuration summary text for autoyast -#: src/modules/Instserver.rb:1441 +#. Configuration summary text for autoyast +#: src/modules/Instserver.rb:1441 msgid "Configured Repositories" msgstr "구성된 리포지토리" Modified: branches/SLE12-SP3/yast/ko/po/iplb.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/iplb.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/iplb.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,159 +14,159 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xiplb module -#: src/clients/iplb.rb:54 +#. Command line help text for the Xiplb module +#: src/clients/iplb.rb:54 msgid "Configuration of IPLB" msgstr "IPLB 구성" -#. Rich text title for Iplb in proposals -#: src/clients/iplb_proposal.rb:81 +#. Rich text title for Iplb in proposals +#: src/clients/iplb_proposal.rb:81 msgid "Iplb" msgstr "IPLB" -#. Menu title for Iplb in proposals -#: src/clients/iplb_proposal.rb:83 +#. Menu title for Iplb in proposals +#: src/clients/iplb_proposal.rb:83 msgid "&Iplb" msgstr "IPLB(&I)" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: clients/iplb.ycp -#. Package: Configuration of iplb -#. Summary: Main file -#. Authors: Cong Meng -#. -#. $Id: iplb.ycp 27914 2006-02-13 14:32:08Z locilka $ -#. -#. Main file for iplb configuration. Uses all other files. -#: src/include/iplb/common.rb:44 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: clients/iplb.ycp +#. Package: Configuration of iplb +#. Summary: Main file +#. Authors: Cong Meng +#. +#. $Id: iplb.ycp 27914 2006-02-13 14:32:08Z locilka $ +#. +#. Main file for iplb configuration. Uses all other files. +#: src/include/iplb/common.rb:44 msgid "Global Configuration" msgstr "전체 구성" -#: src/include/iplb/common.rb:45 +#: src/include/iplb/common.rb:45 msgid "Virtual Servers Configuration" msgstr "가상 서버 구성" -#. Iplb summary dialog caption -#. Iplb configure1 dialog caption -#. Iplb configure2 dialog caption -#. Initialization dialog caption -#: src/include/iplb/complex.rb:83 src/include/iplb/dialogs.rb:46 -#: src/include/iplb/dialogs.rb:85 src/include/iplb/wizards.rb:140 +#. Iplb summary dialog caption +#. Iplb configure1 dialog caption +#. Iplb configure2 dialog caption +#. Initialization dialog caption +#: src/include/iplb/complex.rb:83 src/include/iplb/dialogs.rb:46 +#: src/include/iplb/dialogs.rb:85 src/include/iplb/wizards.rb:140 msgid "IPLB Configuration" msgstr "IPLB 구성" -#. Iplb overview dialog caption -#: src/include/iplb/complex.rb:142 +#. Iplb overview dialog caption +#: src/include/iplb/complex.rb:142 msgid "IPLB Overview" msgstr "IPLB 개요" -#. Iplb configure1 dialog contents -#: src/include/iplb/dialogs.rb:49 +#. Iplb configure1 dialog contents +#: src/include/iplb/dialogs.rb:49 msgid "First part of configuration of IPLB" msgstr "IPLB 구성의 첫 번째 부분" -#. Iplb configure2 dialog contents -#: src/include/iplb/dialogs.rb:88 +#. Iplb configure2 dialog contents +#: src/include/iplb/dialogs.rb:88 msgid "Second part of configuration of IPLB" msgstr "IPLB 구성의 두 번째 부분" -#. ids of widget of global dialog -#: src/include/iplb/global_conf.rb:61 +#. ids of widget of global dialog +#: src/include/iplb/global_conf.rb:61 msgid "yes" msgstr "예" -#: src/include/iplb/global_conf.rb:61 +#: src/include/iplb/global_conf.rb:61 msgid "no" msgstr "아니오" -#: src/include/iplb/global_conf.rb:68 src/include/iplb/vserver_conf.rb:226 +#: src/include/iplb/global_conf.rb:68 src/include/iplb/vserver_conf.rb:226 msgid "&Global Configuration" msgstr "전체 구성(&G)" -#: src/include/iplb/global_conf.rb:69 src/include/iplb/vserver_conf.rb:227 +#: src/include/iplb/global_conf.rb:69 src/include/iplb/vserver_conf.rb:227 msgid "&Virtual Server Configuration" msgstr "가상 서버 구성(&V)" -#: src/include/iplb/global_conf.rb:75 +#: src/include/iplb/global_conf.rb:75 msgid "Check Interval" msgstr "간격 확인" -#: src/include/iplb/global_conf.rb:76 src/include/iplb/vserver_conf.rb:205 +#: src/include/iplb/global_conf.rb:76 src/include/iplb/vserver_conf.rb:205 msgid "Check Timeout" msgstr "제한 시간 확인" -#: src/include/iplb/global_conf.rb:78 src/include/iplb/vserver_conf.rb:214 +#: src/include/iplb/global_conf.rb:78 src/include/iplb/vserver_conf.rb:214 msgid "Failure Count" msgstr "실패 수" -#: src/include/iplb/global_conf.rb:79 src/include/iplb/vserver_conf.rb:208 +#: src/include/iplb/global_conf.rb:79 src/include/iplb/vserver_conf.rb:208 msgid "Negotiate Timeout" msgstr "협상 제한 시간" -#: src/include/iplb/global_conf.rb:85 src/include/iplb/vserver_conf.rb:167 +#: src/include/iplb/global_conf.rb:85 src/include/iplb/vserver_conf.rb:167 msgid "Fallback" msgstr "대체" -#: src/include/iplb/global_conf.rb:86 +#: src/include/iplb/global_conf.rb:86 msgid "Callback" msgstr "콜백" -#: src/include/iplb/global_conf.rb:87 +#: src/include/iplb/global_conf.rb:87 msgid "Execute" msgstr "실행" -#: src/include/iplb/global_conf.rb:91 src/include/iplb/vserver_conf.rb:186 +#: src/include/iplb/global_conf.rb:91 src/include/iplb/vserver_conf.rb:186 msgid "Email Alert" msgstr "전자 메일 경고" -#: src/include/iplb/global_conf.rb:92 src/include/iplb/vserver_conf.rb:187 +#: src/include/iplb/global_conf.rb:92 src/include/iplb/vserver_conf.rb:187 msgid "Email Alert Freq" msgstr "전자 메일 경고 빈도" -#: src/include/iplb/global_conf.rb:93 src/include/iplb/vserver_conf.rb:190 +#: src/include/iplb/global_conf.rb:93 src/include/iplb/vserver_conf.rb:190 msgid "Email Alert Status" msgstr "전자 메일 경고 상태" -#: src/include/iplb/global_conf.rb:100 +#: src/include/iplb/global_conf.rb:100 msgid "Auto Reload" msgstr "자동 다시 로드" -#: src/include/iplb/global_conf.rb:101 src/include/iplb/vserver_conf.rb:216 +#: src/include/iplb/global_conf.rb:101 src/include/iplb/vserver_conf.rb:216 msgid "Quiescent" msgstr "정지" -#: src/include/iplb/global_conf.rb:102 +#: src/include/iplb/global_conf.rb:102 msgid "Fork" msgstr "분기" -#: src/include/iplb/global_conf.rb:103 +#: src/include/iplb/global_conf.rb:103 msgid "Supervised" msgstr "감독됨" -#: src/include/iplb/global_conf.rb:106 +#: src/include/iplb/global_conf.rb:106 msgid "Log File" msgstr "로그 파일" -#. All helps are here -#: src/include/iplb/helps.rb:35 +#. All helps are here +#: src/include/iplb/helps.rb:35 msgid "" "\n" "<p><b><big>check interval</big> =</b> <i>n</i>\n" @@ -174,151 +174,88 @@ "</p><p>Default: 10 seconds\n" "\n" "</p><p><b><big>check timeout</big> =</b> <i>n</i>\n" -"</p><p>Timeout in seconds for connect, external and ping checks. If the " -"timeout is exceeded then the real server is declared dead.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" -"</p><p>If undefined then the value of negotiatetimeout is used. " -"negotiatetimeout is also a global value that may be overriden by a per-" -"virtual setting.\n" -"</p><p>If both checktimeout and negotiatetimeout are unset, the default is " -"used.\n" +"</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" +"</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n" +"</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n" "</p><p>Default: 5 seconds\n" "\n" "</p><p><b><big>failure count</big> =</b> <i>n</i>\n" -"</p><p>The number of consecutive times a failure will have to be reported by " -"a check before the realserver is considered to have failed. A value of 1 " -"will have the realserver considered failed on the first failure. A " -"successful check will reset the failure counter to 0.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: 1\n" "\n" "</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n" "</p><p>Timeout in seconds for negotiate checks.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" -"</p><p>If undefined then the value of connecttimeout is used. connecttimeout " -"is also a global value that may be overriden by a per-virtual setting.\n" -"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is " -"used.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" +"</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n" +"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is used.\n" "</p><p>Default: 30 seconds\n" "\n" -"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|" -"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" -"</p><p>the server onto which a webservice is redirected if all real servers " -"are down. Typically this would be 127.0.0.1 with an emergency page.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" +"</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "\n" -"</p><p><b><big>log file</big> = \"</b><i>/path/to/logfile</i><b>\"</b>|" -"syslog_facility\n" -"</p><p>An alternative logfile might be specified with this directive. If the " -"logfile does not have a leading '/', it is assumed to be a <b>syslog</a></b>(3) facility name.\n" +"</p><p><b><big>log file</big> = \"</b><i>/path/to/logfile</i><b>\"</b>|syslog_facility\n" +"</p><p>An alternative logfile might be specified with this directive. If the logfile does not have a leading '/', it is assumed to be a <b>syslog</a></b>(3) facility name.\n" "</p><p>Default: log directly to the file <i>/var/log/ldirectord.log</i>.\n" "\n" "</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n" -"</p><p>A valid email address for sending alerts about the changed connection " -"status to any real server defined in the virtual service. This option " -"requires perl\n" -"module MailTools to be installed. Automatically tries to send email using " -"any of the built-in methods. See perldoc Mail::Mailer for more info on " -"methods.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\n" +"module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "\n" "</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n" -"</p><p>Delay in seconds between repeating email alerts while any given real " -"server in the virtual service remains inaccessible. A setting of zero " -"seconds will\n" -"inhibit the repeating alerts. The email timing accuracy of this setting is " -"dependent on the number of seconds defined in the checkinterval " -"configuration\n" +"</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\n" +"inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\n" "option.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: 0\n" "\n" -"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" -"</p><p>Comma delimited list of server states in which email alerts should be " -"sent. <b>all</b> is a short-hand for\n" -"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If " -"<b>none</b> is specified, no other option may be specified, otherwise " -"options are ORed\n" +"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" +"</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n" +"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\n" "with each other.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: all\n" "\n" "</p><p><b><big>callback</big> = \"</b><i>/path/to/callback</i><b>\"</b>\n" -"</p><p>If this directive is defined, <b>ldirectord</b> automatically calls " -"the executable <i>/path/to/callback</i> after the configuration file has " -"changed on\n" -"disk. This is useful to update the configuration file through <b>scp</b> on " -"the other heartbeated host. The first argument to the callback is the name " -"of the\n" +"</p><p>If this directive is defined, <b>ldirectord</b> automatically calls the executable <i>/path/to/callback</i> after the configuration file has changed on\n" +"disk. This is useful to update the configuration file through <b>scp</b> on the other heartbeated host. The first argument to the callback is the name of the\n" "configuration.\n" -"</p><p>This directive might also be used to restart <b>ldirectord</b> " -"automatically after the configuration file changed on disk. However, if " -"<b>autoreload</b> is\n" +"</p><p>This directive might also be used to restart <b>ldirectord</b> automatically after the configuration file changed on disk. However, if <b>autoreload</b> is\n" "set to yes, the configuration is reloaded anyway.\n" "\n" "</p><p><b><big>execute</big> = \"</b><i>configuration</i><b>\"</b>\n" -"</p><p>Use this directive to start an instance of ldirectord for the named " -"<i>configuration</i>.\n" +"</p><p>Use this directive to start an instance of ldirectord for the named <i>configuration</i>.\n" "\n" "</p><p><b><big>auto reload</big> = yes</b>|<b>no</b>\n" -"</p><p>Defines if <ldirectord> should continuously check the " -"configuration file for modification. If this is set to 'yes' and the " -"configuration file changed\n" -"on disk and its modification time (mtime) is newer than the previous " -"version, the configuration is automatically reloaded.\n" +"</p><p>Defines if <ldirectord> should continuously check the configuration file for modification. If this is set to 'yes' and the configuration file changed\n" +"on disk and its modification time (mtime) is newer than the previous version, the configuration is automatically reloaded.\n" "</p><p>Default: no\n" "\n" "</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n" -"</p><p>If <i>yes</i>, then when real or failback servers are determined to " -"be down, they are not actually removed from the kernel's <small>LVS</small> " -"table.\n" -"Rather, their weight is set to zero which means that no new connections will " -"be accepted.\n" -"</p><p>This has the side effect, that if the real server has persistent " -"connections, new connections from any existing clients will continue to be " -"routed to the\n" -"real server, until the persistant timeout can expire. See ipvsadm for more " -"information on persistant connections.\n" +"</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\n" +"Rather, their weight is set to zero which means that no new connections will be accepted.\n" +"</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\n" +"real server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n" "</p><p>This side-effect can be avoided by running the following:\n" "</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n" -"</p><p>If the proc file isn't present this probably means that the kernel " -"doesn't have lvs support, <small>LVS</small> support isn't loaded, or the " -"kernel is too\n" -"old to have the proc file. Running ipvsadm as root should load <small>LVS into the kernel if it is possible.\n" -"</p><p>If <i>no</i>, then the real or failback servers will be removed from " -"the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\n" +"old to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n" +"</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: <i>yes</i>\n" "\n" "</p><p><b><big>fork</big> = yes</b>|<b>no</b>\n" -"</p><p>If <i>yes</i>, then ldirectord will spawn a child proccess for every " -"virtual server, and run checks against the real servers from them. This will " -"increase\n" -"response times to changes in real server status in configurations with many " -"virtual servers. This may also use less memory then running many seperate " -"instances\n" +"</p><p>If <i>yes</i>, then ldirectord will spawn a child proccess for every virtual server, and run checks against the real servers from them. This will increase\n" +"response times to changes in real server status in configurations with many virtual servers. This may also use less memory then running many seperate instances\n" "of ldirectord. Child processes will be automaticly restarted if they die.\n" "</p><p>Default: <i>no</i>\n" "\n" "</p><p><b><big>supervised</big> = yes</b>|<b>no</b>\n" -"</p><p>If <i>yes</i>, then ldirectord does not go into background mode. All " -"log-messages are redirected to stdout instead of a logfile. This is useful " -"to run\n" -"<b>ldirectord</b> supervised from daemontools. See http://untroubled.org/rpms/daemontools/ or http://cr.yp.to/daemontools.html\">http://cr.yp.to/" -"daemontools.html</a> for details.\n" +"</p><p>If <i>yes</i>, then ldirectord does not go into background mode. All log-messages are redirected to stdout instead of a logfile. This is useful to run\n" +"<b>ldirectord</b> supervised from daemontools. See http://untroubled.org/rpms/daemontools/\">http://untroubled.org/rpms/daemontools/</a> or http://cr.yp.to/daemontools.html\">http://cr.yp.to/daemontools.html</a> for details.\n" "</p><p>Default: <i>no</i>\n" "</p>\n" msgstr "" @@ -328,217 +265,130 @@ "</p><p>기본값: 10초\n" "\n" "</p><p><b><big>check timeout</big> =</b> <i>n</i>\n" -"</p><p>연결, 외부 및 ping 확인에 대한 제한 시간(초)입니다. 제한 시간을 초과" -"할 경우 실제 서버가 비가동으로 선언됩니다.\n" +"</p><p>연결, 외부 및 ping 확인에 대한 제한 시간(초)입니다. 제한 시간을 초과할 경우 실제 서버가 비가동으로 선언됩니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" -"</p><p>정의되지 않은 경우 negotiatetimeout 값이 사용됩니다. negotiatetimeout" -"도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" -"</p><p>checktimeout 및 negotiatetimeout이 둘 다 설정되지 않은 경우 기본값이 " -"사용됩니다.\n" +"</p><p>정의되지 않은 경우 negotiatetimeout 값이 사용됩니다. negotiatetimeout도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" +"</p><p>checktimeout 및 negotiatetimeout이 둘 다 설정되지 않은 경우 기본값이 사용됩니다.\n" "</p><p>기본값: 5초\n" "\n" "</p><p><b><big>failure count</big> =</b> <i>n</i>\n" -"</p><p>실제 서버가 실패한 것으로 간주되기 전에 확인에서 실패를 보고해야 하는 " -"연속 횟수입니다. 값이 1이면 처음 실패 시 실제 서버가 실패한 것으로 간주됩니" -"다. 성공적으로 확인되면 실패 카운터가 0으로 재설정됩니다.\n" +"</p><p>실제 서버가 실패한 것으로 간주되기 전에 확인에서 실패를 보고해야 하는 연속 횟수입니다. 값이 1이면 처음 실패 시 실제 서버가 실패한 것으로 간주됩니다. 성공적으로 확인되면 실패 카운터가 0으로 재설정됩니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: 1\n" "\n" "</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n" "</p><p>negotiate 확인에 대한 제한 시간(초)입니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" -"</p><p>정의되지 않은 경우 connecttimeout 값이 사용됩니다. connecttimeout도 가" -"상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" -"</p><p>negotiatetimeout 및 connecttimeout이 둘 다 설정되지 않은 경우 기본값" -"이 사용됩니다.\n" +"</p><p>정의되지 않은 경우 connecttimeout 값이 사용됩니다. connecttimeout도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" +"</p><p>negotiatetimeout 및 connecttimeout이 둘 다 설정되지 않은 경우 기본값이 사용됩니다.\n" "</p><p>기본값: 30초\n" "\n" -"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|" -"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" -"</p><p>실제 서버가 모두 다운된 경우 웹 서비스가 리디렉션되는 서버입니다. 일반" -"적으로 응급 페이지가 있는 127.0.0.1입니다.\n" +"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" +"</p><p>실제 서버가 모두 다운된 경우 웹 서비스가 리디렉션되는 서버입니다. 일반적으로 응급 페이지가 있는 127.0.0.1입니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "\n" -"</p><p><b><big>log file</big> = \"</b><i>/path/to/logfile</i><b>\"</b>|" -"syslog_facility\n" -"</p><p>이 지시문을 사용하여 대체 로그 파일을 지정할 수 있습니다. 로그 파일에 " -"선행 '/'가 없는 경우 <b>syslog</a></b>(3) 기능 이름" -"으로 가정됩니다.\n" +"</p><p><b><big>log file</big> = \"</b><i>/path/to/logfile</i><b>\"</b>|syslog_facility\n" +"</p><p>이 지시문을 사용하여 대체 로그 파일을 지정할 수 있습니다. 로그 파일에 선행 '/'가 없는 경우 <b>syslog</a></b>(3) 기능 이름으로 가정됩니다.\n" "</p><p>기본값: <i>/var/log/ldirectord.log</i> 파일에 직접 로깅\n" "\n" "</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n" -"</p><p>가상 서비스에 정의된 실제 서버에 변경된 연결 상태에 대한 경고를 보내" -"기 위한 유효한 전자 메일 주소입니다. 이 옵션을 사용하려면 perl\n" -"모듈 MailTools를 설치해야 합니다. 기본 제공 방법을 사용하여 자동으로 전자 메" -"일 전송을 시도합니다. 방법에 대한 자세한 내용은 perldoc Mail::Mailer를 참조하" -"십시오.\n" +"</p><p>가상 서비스에 정의된 실제 서버에 변경된 연결 상태에 대한 경고를 보내기 위한 유효한 전자 메일 주소입니다. 이 옵션을 사용하려면 perl\n" +"모듈 MailTools를 설치해야 합니다. 기본 제공 방법을 사용하여 자동으로 전자 메일 전송을 시도합니다. 방법에 대한 자세한 내용은 perldoc Mail::Mailer를 참조하십시오.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "\n" "</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n" -"</p><p>가상 서비스에 지정된 실제 서버에 액세스할 수 없는 동안 반복되는 전자 " -"메일 경고 사이의 지연(초)입니다. 0초를 설정하면\n" -"반복 경고가 사용되지 않습니다. 이 설정의 전자 메일 타이밍 정확도는 " -"checkinterval 구성 옵션에 정의된 시간(초)에 따라\n" +"</p><p>가상 서비스에 지정된 실제 서버에 액세스할 수 없는 동안 반복되는 전자 메일 경고 사이의 지연(초)입니다. 0초를 설정하면\n" +"반복 경고가 사용되지 않습니다. 이 설정의 전자 메일 타이밍 정확도는 checkinterval 구성 옵션에 정의된 시간(초)에 따라\n" "달라집니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: 0\n" "\n" -"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" -"</p><p>전자 메일 경고가 전송되어야 하는 서버 상태의 쉼표로 구분된 목록입니" -"다. <b>all</b>은\n" -"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\"을 나타냅" -"니다. <b>none</b>이 지정된 경우 다른 옵션을 지정할 수 없습니다. 그렇지 않으" -"면 옵션은 서로 or로\n" +"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" +"</p><p>전자 메일 경고가 전송되어야 하는 서버 상태의 쉼표로 구분된 목록입니다. <b>all</b>은\n" +"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\"을 나타냅니다. <b>none</b>이 지정된 경우 다른 옵션을 지정할 수 없습니다. 그렇지 않으면 옵션은 서로 or로\n" "연결됩니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: all\n" "\n" "</p><p><b><big>callback</big> = \"</b><i>/path/to/callback</i><b>\"</b>\n" -"</p><p>이 지시문이 정의된 경우 <b>ldirectord</b>에서 디스크의 구성 파일이 변" -"경된 후 실행 파일 <i>/path/to/callback</i>을 자동으로\n" -"호출합니다. 다른 하트비트 호스트에서 <b>scp</b>를 통해 구성 파일을 업데이트하" -"는 데 유용합니다. 콜백에 대한 첫 번째 인수는 구성\n" +"</p><p>이 지시문이 정의된 경우 <b>ldirectord</b>에서 디스크의 구성 파일이 변경된 후 실행 파일 <i>/path/to/callback</i>을 자동으로\n" +"호출합니다. 다른 하트비트 호스트에서 <b>scp</b>를 통해 구성 파일을 업데이트하는 데 유용합니다. 콜백에 대한 첫 번째 인수는 구성\n" "이름입니다.\n" -"</p><p>이 지시문을 사용하여 디스크의 구성 파일이 변경된 후 <b>ldirectord</b>" -"를 자동으로 다시 시작할 수도 있습니다. 그러나 <b>autoreload</b>가\n" +"</p><p>이 지시문을 사용하여 디스크의 구성 파일이 변경된 후 <b>ldirectord</b>를 자동으로 다시 시작할 수도 있습니다. 그러나 <b>autoreload</b>가\n" "yes로 설정된 경우 구성이 다시 로드됩니다.\n" "\n" "</p><p><b><big>execute</big> = \"</b><i>configuration</i><b>\"</b>\n" -"</p><p>이 지시문을 사용하여 명명된 <i>configuration</i>에 대해 ldirectord 인" -"스턴스를 시작합니다.\n" +"</p><p>이 지시문을 사용하여 명명된 <i>configuration</i>에 대해 ldirectord 인스턴스를 시작합니다.\n" "\n" "</p><p><b><big>auto reload</big> = yes</b>|<b>no</b>\n" -"</p><p><ldirectord>에서 구성 파일이 수정되었는지 계속 확인해야 하는지 " -"여부를 정의합니다. 'yes'로 설정되고 디스크의 구성 파일이\n" -"변경되었으며 수정 시간(mtime)이 이전 버전보다 최신인 경우 구성이 자동으로 다" -"시 로드됩니다.\n" +"</p><p><ldirectord>에서 구성 파일이 수정되었는지 계속 확인해야 하는지 여부를 정의합니다. 'yes'로 설정되고 디스크의 구성 파일이\n" +"변경되었으며 수정 시간(mtime)이 이전 버전보다 최신인 경우 구성이 자동으로 다시 로드됩니다.\n" "</p><p>기본값: no\n" "\n" "</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n" -"</p><p><i>yes</i>인 경우 실제 또는 대체 서버가 다운된 것이 확인될 때 실제로 " -"커널의 <small>LVS</small> 테이블에서 제거되지 않습니다.\n" +"</p><p><i>yes</i>인 경우 실제 또는 대체 서버가 다운된 것이 확인될 때 실제로 커널의 <small>LVS</small> 테이블에서 제거되지 않습니다.\n" "대신 가중치가 0으로 설정되어 새 연결이 수락되지 않습니다.\n" -"</p><p>이 경우 실제 서버에 영구적 연결이 있으면 영구적 제한 시간이 만료될 때" -"까지 기존 클라이언트의 새 연결이 계속 실제 서버로 \n" -"라우팅되는 부작용이 있습니다. 영구적 연결에 대한 자세한 내용은 ipvsadm을 참조" -"하십시오.\n" +"</p><p>이 경우 실제 서버에 영구적 연결이 있으면 영구적 제한 시간이 만료될 때까지 기존 클라이언트의 새 연결이 계속 실제 서버로 \n" +"라우팅되는 부작용이 있습니다. 영구적 연결에 대한 자세한 내용은 ipvsadm을 참조하십시오.\n" "</p><p>다음을 실행하면 이 부작용을 방지할 수 있습니다.\n" "</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n" -"</p><p>proc 파일이 없는 경우 커널에 lvs 지원이 없거나, <small>LVS</small> 지" -"원이 로드되지 않았거나, 커널이 너무 오래되어\n" -"proc 파일을 포함할 수 없음을 의미합니다. 루트로 ipvsadm을 실행할 경우 가능하" -"면 <small>LVS</small>가 커널에 로드되어야 합니다.\n" -"</p><p><i>no</i>인 경우 실제 또는 대체 서버가 커널의 <small>LVS</small> 테이" -"블에서 제거됩니다. 기본값은 <i>yes</i>입니다.\n" +"</p><p>proc 파일이 없는 경우 커널에 lvs 지원이 없거나, <small>LVS</small> 지원이 로드되지 않았거나, 커널이 너무 오래되어\n" +"proc 파일을 포함할 수 없음을 의미합니다. 루트로 ipvsadm을 실행할 경우 가능하면 <small>LVS</small>가 커널에 로드되어야 합니다.\n" +"</p><p><i>no</i>인 경우 실제 또는 대체 서버가 커널의 <small>LVS</small> 테이블에서 제거됩니다. 기본값은 <i>yes</i>입니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: <i>yes</i>\n" "\n" "</p><p><b><big>fork</big> = yes</b>|<b>no</b>\n" -"</p><p><i>yes</i>인 경우 ldirectord에서 모든 가상 서버에 대해 하위 프로세스" -"를 생성하고 이 프로세스에서 실제 서버에 대한 확인을 실행합니다. 이로 인해 많" -"은 가상 서버가\n" -"포함된 구성에서 실제 서버 상태 변경에 대한 응답 시간이 증가합니다. 또한 많은 " -"개별\n" -"ldirectord 인스턴스를 실행하는 것보다 메모리 사용이 더 적을 수 있습니다. 하" -"위 프로세스는 비가동 시 자동으로 다시 시작됩니다.\n" +"</p><p><i>yes</i>인 경우 ldirectord에서 모든 가상 서버에 대해 하위 프로세스를 생성하고 이 프로세스에서 실제 서버에 대한 확인을 실행합니다. 이로 인해 많은 가상 서버가\n" +"포함된 구성에서 실제 서버 상태 변경에 대한 응답 시간이 증가합니다. 또한 많은 개별\n" +"ldirectord 인스턴스를 실행하는 것보다 메모리 사용이 더 적을 수 있습니다. 하위 프로세스는 비가동 시 자동으로 다시 시작됩니다.\n" "</p><p>기본값: <i>no</i>\n" "\n" "</p><p><b><big>supervised</big> = yes</b>|<b>no</b>\n" -"</p><p><i>yes</i>인 경우 ldirectord가 백그라운드 모드로 전환되지 않습니다. 모" -"든 로그 메시지가 로그 파일 대신 stdout으로 리디렉션됩니다. daemontools에서 감" -"독하는\n" -"<b>ldirectord</b>를 실행하는 데 유용합니다. 자세한 내용은 http://untroubled.org/rpms/daemontools/ 또는 http://cr.yp.to/daemontools.html\">http://cr.yp.to/" -"daemontools.html</a>을 참조하십시오.\n" +"</p><p><i>yes</i>인 경우 ldirectord가 백그라운드 모드로 전환되지 않습니다. 모든 로그 메시지가 로그 파일 대신 stdout으로 리디렉션됩니다. daemontools에서 감독하는\n" +"<b>ldirectord</b>를 실행하는 데 유용합니다. 자세한 내용은 http://untroubled.org/rpms/daemontools/\">http://untroubled.org/rpms/daemontools/</a> 또는 http://cr.yp.to/daemontools.html\">http://cr.yp.to/daemontools.html</a>을 참조하십시오.\n" "</p><p>기본값: <i>no</i>\n" "</p>\n" -#: src/include/iplb/helps.rb:127 +#: src/include/iplb/helps.rb:127 msgid "" "\n" -"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|" -"servicename)|firewall-mark</i>\n" -"</p><p>Defines a virtual service by IP-address (or hostname) and port (or " -"servicename) or firewall-mark. A firewall-mark is an integer greater than " -"zero. The\n" -"configuration of marking packets is controled using the <tt>\"-m\"</tt> " -"option to <b>ipchains</b>(8). All real services and flags for a virtual " -"service\n" +"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|servicename)|firewall-mark</i>\n" +"</p><p>Defines a virtual service by IP-address (or hostname) and port (or servicename) or firewall-mark. A firewall-mark is an integer greater than zero. The\n" +"configuration of marking packets is controled using the <tt>\"-m\"</tt> option to <b>ipchains</b>(8). All real services and flags for a virtual service\n" "must follow this line immediately and be indented.\n" "\n" "\n" -"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->" -"ip_address|hostname][:portnumber|servicename</i>]\n" -"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request<b>\", \"</b><i>receive</i><b>\"</b>]\n" -"</p><p>Defines a real service by IP-address (or hostname) and port (or " -"servicename). If the port is omitted then a 0 will be used, this is intended " -"primarily for\n" -"fwmark services where the port for real servers is ignored. Optionally a " -"range of <small>IP</small> addresses (or two hostnames) may be given, in " -"which case\n" -"each <small>IP</small> address in the range will be treated as a real server " -"using the given port. The second argument defines the forwarding method, " -"must be\n" -"<b>gate</b>, <b>ipip</b> or <b>masq</b>. The thrid argument is optional and " -"defines the weight for that real server. If omitted then a weight of 1 will " -"be\n" -"used. The last two arguments are also optional. They define a request-" -"receive pair to be used to check if a server is alive. They override the " -"request-receive\n" -"pair in the virtual server section. These two strings must be quoted. If the " -"request string starts with http://... the IP-address and port of the real\n" -"server is overridden, otherwise the IP-address and port of the real server " -"is used.\n" -"</p><p>For <small>TCP</small> and <small>UDP</small> (non fwmark) virtual " -"services, unless the forwarding method is masq and the <small>IP</small> " -"address of a\n" -"real server is non-local (not present on a interface on the host running " -"ldirectord) then the port of the real server will be set to that of its " -"virtual\n" -"service. That is, port-mapping is only available to if the real server is " -"another machine and the forwarding method is masq. This is due to the way " -"that the\n" +"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->ip_address|hostname][:portnumber|servicename</i>]\n" +"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request</i><b>\", \"</b><i>receive</i><b>\"</b>]\n" +"</p><p>Defines a real service by IP-address (or hostname) and port (or servicename). If the port is omitted then a 0 will be used, this is intended primarily for\n" +"fwmark services where the port for real servers is ignored. Optionally a range of <small>IP</small> addresses (or two hostnames) may be given, in which case\n" +"each <small>IP</small> address in the range will be treated as a real server using the given port. The second argument defines the forwarding method, must be\n" +"<b>gate</b>, <b>ipip</b> or <b>masq</b>. The thrid argument is optional and defines the weight for that real server. If omitted then a weight of 1 will be\n" +"used. The last two arguments are also optional. They define a request-receive pair to be used to check if a server is alive. They override the request-receive\n" +"pair in the virtual server section. These two strings must be quoted. If the request string starts with http://... the IP-address and port of the real\n" +"server is overridden, otherwise the IP-address and port of the real server is used.\n" +"</p><p>For <small>TCP</small> and <small>UDP</small> (non fwmark) virtual services, unless the forwarding method is masq and the <small>IP</small> address of a\n" +"real server is non-local (not present on a interface on the host running ldirectord) then the port of the real server will be set to that of its virtual\n" +"service. That is, port-mapping is only available to if the real server is another machine and the forwarding method is masq. This is due to the way that the\n" "underlying <small>LVS</small> code in the kernel functions.\n" -"</p><p>More than one of these entries may be inside a virtual section. The " -"checktimeout, negotiatetimeout, failurecount, fallback, emailalert, " -"emailalertfreq and\n" -"quiescent options listed above may also appear inside a virtual section, in " -"which case the global setting is overridden.\n" +"</p><p>More than one of these entries may be inside a virtual section. The checktimeout, negotiatetimeout, failurecount, fallback, emailalert, emailalertfreq and\n" +"quiescent options listed above may also appear inside a virtual section, in which case the global setting is overridden.\n" "\n" "\n" -"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n" -"</p><p>Type of check to perform. Negotiate sends a request and matches a " -"receive string. Connect only attemts to make a <small>TCP/IP</small> " -"connection, thus the\n" -"request and receive strings may be omitted. If checktype is a number then " -"negotiate and connect is combined so that after each N connect attempts one " -"negotiate\n" -"attempt is performed. This is useful to check often if a service answers and " -"in much longer intervalls a negotiating check is done. Ping means that\n" -"<small>ICMP</small> ping will be used to test the availability of real " -"servers. Ping is also used as the connect check for <small>UDP</small> " -"services. Off\n" -"means no checking will take place and no real or fallback servers will be " -"activated. On means no checking will take place and real servers will always " -"be\n" +"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate</b>|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n" +"</p><p>Type of check to perform. Negotiate sends a request and matches a receive string. Connect only attemts to make a <small>TCP/IP</small> connection, thus the\n" +"request and receive strings may be omitted. If checktype is a number then negotiate and connect is combined so that after each N connect attempts one negotiate\n" +"attempt is performed. This is useful to check often if a service answers and in much longer intervalls a negotiating check is done. Ping means that\n" +"<small>ICMP</small> ping will be used to test the availability of real servers. Ping is also used as the connect check for <small>UDP</small> services. Off\n" +"means no checking will take place and no real or fallback servers will be activated. On means no checking will take place and real servers will always be\n" "activated. Default is <i>negotiate</i>.\n" "\n" "\n" -"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|" -"<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|" -"<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|" -"<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n" -"</p><p>The type of service to monitor when using checktype=negotiate. None " -"denotes a service that will not be monitored.\n" -"</p><p>simpletcp sends the <b>request</b> string to the server and tests it " -"against the <b>receive</b> regexp. The other types of checks connect to the " -"server\n" -"using the specified protocol. Please see the <b>request</b> and <b>receive sections for protocol specific information.\n" +"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n" +"</p><p>The type of service to monitor when using checktype=negotiate. None denotes a service that will not be monitored.\n" +"</p><p>simpletcp sends the <b>request</b> string to the server and tests it against the <b>receive</b> regexp. The other types of checks connect to the server\n" +"using the specified protocol. Please see the <b>request</b> and <b>receive</b> sections for protocol specific information.\n" "</p><p>Default:\n" "</p>

\n" "<dt>* Virtual server port is 21: ftp\n" @@ -561,9 +411,7 @@ "\n" "\n" "</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n" -"<p>This setting is used if checktype is external and is the command to be " -"run to check the status of a real server. It should exit with status 0 if " -"everything\n" +"<p>This setting is used if checktype is external and is the command to be run to check the status of a real server. It should exit with status 0 if everything\n" "is ok, or non-zero otherwise.\n" "</p><p>Four parameters are passed to the script:\n" "</p></dt><dt>* virtual server ip/firewall mark\n" @@ -574,105 +422,68 @@ "\n" "\n" "<p><b><big>check port</big> =</b> <i>n</i>\n" -"</p><p>Number of port to monitor. Sometimes check port differs from service " -"port.\n" +"</p><p>Number of port to monitor. Sometimes check port differs from service port.\n" "</p><p>Default: port specified for each real server\n" "\n" "\n" -"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"\n" -"</p><p>This object will be requested each checkinterval seconds on each real " -"server. The string must be inside quotes. Note that this string may be " -"overridden by\n" +"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n" +"</p><p>This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by\n" "an optional per real-server based request-string.\n" -"</p><p>For a <small>DNS</small> check this should the name of an A record, " -"or the address of a <small>PTR</small> record to look up.\n" -"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL query. The data returned is not checked, only that the answer is one " -"or more\n" +"</p><p>For a <small>DNS</small> check this should the name of an A record, or the address of a <small>PTR</small> record to look up.\n" +"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL</small> query. The data returned is not checked, only that the answer is one or more\n" "rows. This is a required setting.\n" -"</p><p>For a simpletcp check, this string is sent verbatim except any " -"occurances of \n" +"</p><p>For a simpletcp check, this string is sent verbatim except any occurances of \n" " are replaced with a new line character.\n" "\n" "\n" "</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n" -"</p><p>If the requested result contains this <i>regexp to compare</i>, the " -"real server is declared alive. The regexp must be inside quotes. Keep in " -"mind that\n" -"regexps are not plain strings and that you need to escape the special " -"characters if they should as literals. Note that this regexp may be " -"overridden by an\n" +"</p><p>If the requested result contains this <i>regexp to compare</i>, the real server is declared alive. The regexp must be inside quotes. Keep in mind that\n" +"regexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an\n" "optional per real-server based receive regexp.\n" -"</p><p>For a <small>DNS</small> check this should be any one the A record's " -"addresses or any one of the <small>PTR</small> record's names.\n" +"</p><p>For a <small>DNS</small> check this should be any one the A record's addresses or any one of the <small>PTR</small> record's names.\n" "</p><p>For a MySQL check, the receive setting is not used.\n" "\n" "\n" -"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</b>\n" -"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the " -"<small>URI</small> specified in the request-string. <small>GET</small> is " -"the\n" -"method used by default if the parameter is not set. If <small>HEAD</small> " -"is used, the receive-string should be unset.\n" +"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n" +"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the <small>URI</small> specified in the request-string. <small>GET</small> is the\n" +"method used by default if the parameter is not set. If <small>HEAD</small> is used, the receive-string should be unset.\n" "</p><p>Default: <small>GET</small>\n" "\n" "\n" "</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n" -"</p><p>Used when using a negotiate check with <small>HTTP</small> or " -"<small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> " -"request. In the\n" -"case of <small>HTTPS</small> this generally needs to match the common name " -"of the <small>SSL</small> certificate. If not set then the host header will " -"be\n" -"derived from the request url for the real server if present. As a last " -"resort the <small>IP</small> address of the real server will be used.\n" +"</p><p>Used when using a negotiate check with <small>HTTP</small> or <small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> request. In the\n" +"case of <small>HTTPS</small> this generally needs to match the common name of the <small>SSL</small> certificate. If not set then the host header will be\n" +"derived from the request url for the real server if present. As a last resort the <small>IP</small> address of the real server will be used.\n" "\n" "\n" "</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n" -"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , " -"MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log " -"in.\n" +"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log in.\n" "</p><p>For Radius the passwd is used for the attribute User-Name.\n" -"</p><p>For <small>SIP</small> , the username is used as both the to and from " -"address for an <small>OPTIONS</small> query.\n" +"</p><p>For <small>SIP</small> , the username is used as both the to and from address for an <small>OPTIONS</small> query.\n" "</p><p>Default:\n" "</p></dt><dt>* <small>FTP:</small> Anonymous\n" -"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the " -"configuration\n" -"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is " -"derived as per the passwd option below.\n" -"</dt><dt>* Otherwise: empty string, which denotes that case authentication " -"will not be attempted.\n" +"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the configuration\n" +"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is derived as per the passwd option below.\n" +"</dt><dt>* Otherwise: empty string, which denotes that case authentication will not be attempted.\n" "\n" "\n" "</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n" -"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , " -"<small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n" +"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n" "<small>SIP</small> servers.\n" "</p><p>For Radius the passwd is used for the attribute User-Password.\n" "</p><p>Default:\n" -"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where " -"hostname is the environment variable <small>HOSTNAME</small> evaluated at " -"run time, or sourced\n" +"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where hostname is the environment variable <small>HOSTNAME</small> evaluated at run time, or sourced\n" "from uname if unset.\n" -"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , " -"MySQL, Oracle, and PostgreSQL this means that authentication will not be " -"performed.\n" +"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , MySQL, Oracle, and PostgreSQL this means that authentication will not be performed.\n" "\n" "\n" "</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n" -"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the " -"database that the query (set by <b>receive</b> above) will be performed " -"against. This\n" +"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by <b>receive</b> above) will be performed against. This\n" "is a required setting.\n" "\n" "\n" "</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n" -"</p><p>Secret to use for Radius servers, this is the secret used to perform " -"an Access-Request with the username (set by <b>login</b> above) and passwd " -"(set by\n" +"</p><p>Secret to use for Radius servers, this is the secret used to perform an Access-Request with the username (set by <b>login</b> above) and passwd (set by\n" "<b>passwd</b> above).\n" "</p><p>Default: empty string\n" "\n" @@ -686,193 +497,115 @@ "\n" "\n" "</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n" -"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an " -"information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n" +"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n" "</p><p>Default: \"wrr\"\n" "\n" "\n" "</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n" -"</p><p>Protocol to be used. If the virtual is specified as an <small>IP address and port then it must be one of tcp or udp. If a firewall " -"mark then the\n" +"</p><p>Protocol to be used. If the virtual is specified as an <small>IP</small> address and port then it must be one of tcp or udp. If a firewall mark then the\n" "protocol must be fwm.\n" "</p><p>Default:\n" -"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the " -"port is not 53: tcp\n" -"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is " -"53: udp\n" +"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the port is not 53: tcp\n" +"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is 53: udp\n" "</dt><dt>* Virtual is a firewall mark: fwm\n" "</dt></dl>\n" "\n" "\n" "</p><p><b><big>check timeout</big> =</b> <i>n</i>\n" -"</p><p>Timeout in seconds for connect, external and ping checks. If the " -"timeout is exceeded then the real server is declared dead.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" -"</p><p>If undefined then the value of negotiatetimeout is used. " -"negotiatetimeout is also a global value that may be overriden by a per-" -"virtual setting.\n" -"</p><p>If both checktimeout and negotiatetimeout are unset, the default is " -"used.\n" +"</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" +"</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n" +"</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n" "</p><p>Default: 5 seconds\n" "\n" "</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n" "</p><p>Timeout in seconds for negotiate checks.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" -"</p><p>If undefined then the value of connecttimeout is used. connecttimeout " -"is also a global value that may be overriden by a per-virtual setting.\n" -"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is " -"used.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" +"</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n" +"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is used.\n" "</p><p>Default: 30 seconds\n" "\n" "</p><p><b><big>failure count</big> =</b> <i>n</i>\n" -"</p><p>The number of consecutive times a failure will have to be reported by " -"a check before the realserver is considered to have failed. A value of 1 " -"will have the realserver considered failed on the first failure. A " -"successful check will reset the failure counter to 0.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: 1\n" "\n" "</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n" -"</p><p>A valid email address for sending alerts about the changed connection " -"status to any real server defined in the virtual service. This option " -"requires perl\n" -"module MailTools to be installed. Automatically tries to send email using " -"any of the built-in methods. See perldoc Mail::Mailer for more info on " -"methods.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\n" +"module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "\n" "</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n" -"</p><p>Delay in seconds between repeating email alerts while any given real " -"server in the virtual service remains inaccessible. A setting of zero " -"seconds will\n" -"inhibit the repeating alerts. The email timing accuracy of this setting is " -"dependent on the number of seconds defined in the checkinterval " -"configuration\n" +"</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\n" +"inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\n" "option.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: 0\n" "\n" -"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" -"</p><p>Comma delimited list of server states in which email alerts should be " -"sent. <b>all</b> is a short-hand for\n" -"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If " -"<b>none</b> is specified, no other option may be specified, otherwise " -"options are ORed\n" +"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" +"</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n" +"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\n" "with each other.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: all\n" "\n" -"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|" -"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" -"</p><p>the server onto which a webservice is redirected if all real servers " -"are down. Typically this would be 127.0.0.1 with an emergency page.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" +"</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "\n" "</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n" -"</p><p>If <i>yes</i>, then when real or failback servers are determined to " -"be down, they are not actually removed from the kernel's <small>LVS</small> " -"table.\n" -"Rather, their weight is set to zero which means that no new connections will " -"be accepted.\n" -"</p><p>This has the side effect, that if the real server has persistent " -"connections, new connections from any existing clients will continue to be " -"routed to the\n" -"real server, until the persistant timeout can expire. See ipvsadm for more " -"information on persistant connections.\n" +"</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\n" +"Rather, their weight is set to zero which means that no new connections will be accepted.\n" +"</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\n" +"real server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n" "</p><p>This side-effect can be avoided by running the following:\n" "</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n" -"</p><p>If the proc file isn't present this probably means that the kernel " -"doesn't have lvs support, <small>LVS</small> support isn't loaded, or the " -"kernel is too\n" -"old to have the proc file. Running ipvsadm as root should load <small>LVS into the kernel if it is possible.\n" -"</p><p>If <i>no</i>, then the real or failback servers will be removed from " -"the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n" -"</p><p>If defined in a virtual server section then the global value is " -"overridden.\n" +"</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\n" +"old to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n" +"</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n" +"</p><p>If defined in a virtual server section then the global value is overridden.\n" "</p><p>Default: <i>yes</i>\n" "\n" "\n" "\n" msgstr "" "\n" -"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|" -"servicename)|firewall-mark</i>\n" -"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename) 또는 firewall-mark로 " -"가상 서비스를 정의합니다. firewall-mark는 0보다 큰 정수입니다.\n" -"패킷 표시 구성은 <b>ipchains</b>(8)에 대한 <tt>\"-m\"</tt> 옵션을 사용하여 제" -"어됩니다. 가상 서비스에 대한 모든 실제 서비스 및 플래그가\n" +"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|servicename)|firewall-mark</i>\n" +"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename) 또는 firewall-mark로 가상 서비스를 정의합니다. firewall-mark는 0보다 큰 정수입니다.\n" +"패킷 표시 구성은 <b>ipchains</b>(8)에 대한 <tt>\"-m\"</tt> 옵션을 사용하여 제어됩니다. 가상 서비스에 대한 모든 실제 서비스 및 플래그가\n" "이 줄 바로 뒤에 들여쓰기로 표시되어야 합니다.\n" "\n" "\n" -"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->" -"ip_address|hostname][:portnumber|servicename</i>]\n" -"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request<b>\", \"</b><i>receive</i><b>\"</b>]\n" -"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename)로 실제 서비스를 정의합" -"니다. 포트가 생략된 경우 0이 사용되며, 주로 실제 서버의 포트가 무시되는\n" -"fwmark 서비스에 사용됩니다. 선택적으로 <small>IP</small> 주소 범위(또는 두 개" -"의 hostname)를 제공할 수 있으며, 이 경우\n" -"범위의 각 <small>IP</small> 주소는 주어진 포트를 사용하는 실제 서버로 처리됩" -"니다. 두 번째 인수는 전달 방법을 정의하며\n" -"<b>gate</b>, <b>ipip</b> 또는 <b>masq</b>여야 합니다. 세 번째 인수는 선택 사" -"항이며 실제 서버의 가중치를 정의합니다. 생략된 경우 가중치 1이\n" -"사용됩니다. 마지막 두 인수도 선택 사항입니다. 두 인수는 서버가 활성 상태인지 " -"확인하는 데 사용되는 요청-수신 쌍을 정의합니다. 가상 서버 섹션의 요청-수신 쌍" -"을\n" -"무효화합니다. 이러한 두 문자열은 따옴표로 묶어야 합니다. 요청 문자열이 " -"http://...로 시작하는 경우 실제 서버의 IP 주소와 포트가\n" +"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->ip_address|hostname][:portnumber|servicename</i>]\n" +"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request</i><b>\", \"</b><i>receive</i><b>\"</b>]\n" +"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename)로 실제 서비스를 정의합니다. 포트가 생략된 경우 0이 사용되며, 주로 실제 서버의 포트가 무시되는\n" +"fwmark 서비스에 사용됩니다. 선택적으로 <small>IP</small> 주소 범위(또는 두 개의 hostname)를 제공할 수 있으며, 이 경우\n" +"범위의 각 <small>IP</small> 주소는 주어진 포트를 사용하는 실제 서버로 처리됩니다. 두 번째 인수는 전달 방법을 정의하며\n" +"<b>gate</b>, <b>ipip</b> 또는 <b>masq</b>여야 합니다. 세 번째 인수는 선택 사항이며 실제 서버의 가중치를 정의합니다. 생략된 경우 가중치 1이\n" +"사용됩니다. 마지막 두 인수도 선택 사항입니다. 두 인수는 서버가 활성 상태인지 확인하는 데 사용되는 요청-수신 쌍을 정의합니다. 가상 서버 섹션의 요청-수신 쌍을\n" +"무효화합니다. 이러한 두 문자열은 따옴표로 묶어야 합니다. 요청 문자열이 http://...로 시작하는 경우 실제 서버의 IP 주소와 포트가\n" "무효화되고, 그렇지 않으면 실제 서버의 IP 주소와 포트가 사용됩니다.\n" -"</p><p><small>TCP</small> 및 <small>UDP</small>(fwmark 아님) 가상 서비스의 경" -"우 전달 방법이 masq이고 실제 서버의 <small>IP</small> 주소가\n" -"비로컬(ldirectord를 실행하는 호스트의 인터페이스에 없음)인 경우가 아니면 실" -"제 서버의 포트가 가상 서비스의 포트로\n" -"설정됩니다. 즉, 실제 서버가 다른 컴퓨터이고 전달 방법이 masq인 경우에만 포트 " -"매핑을 사용할 수 있습니다. 이는\n" +"</p><p><small>TCP</small> 및 <small>UDP</small>(fwmark 아님) 가상 서비스의 경우 전달 방법이 masq이고 실제 서버의 <small>IP</small> 주소가\n" +"비로컬(ldirectord를 실행하는 호스트의 인터페이스에 없음)인 경우가 아니면 실제 서버의 포트가 가상 서비스의 포트로\n" +"설정됩니다. 즉, 실제 서버가 다른 컴퓨터이고 전달 방법이 masq인 경우에만 포트 매핑을 사용할 수 있습니다. 이는\n" "커널의 기본 <small>LVS</small> 코드가 작동하는 방식 때문입니다.\n" -"</p><p>이러한 항목이 가상 섹션 내에 두 개 이상 있을 수 있습니다. 위에 나열된 " -"checktimeout, negotiatetimeout, failurecount, fallback, emailalert, " -"emailalertfreq 및\n" -"quiescent 옵션이 가상 섹션 내에 표시될 수도 있으며, 이 경우 전역 설정이 무효" -"화됩니다.\n" +"</p><p>이러한 항목이 가상 섹션 내에 두 개 이상 있을 수 있습니다. 위에 나열된 checktimeout, negotiatetimeout, failurecount, fallback, emailalert, emailalertfreq 및\n" +"quiescent 옵션이 가상 섹션 내에 표시될 수도 있으며, 이 경우 전역 설정이 무효화됩니다.\n" "\n" "\n" -"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n" -"</p><p>수행할 확인 유형입니다. negotiate는 요청을 보내고 수신 문자열을 일치시" -"킵니다. connect는 <small>TCP/IP</small> 연결만 설정하려고 하므로\n" -"요청 및 수신 문자열을 생략할 수 있습니다. checktype이 숫자이면 각 N회 연결 시" -"도 후에 협상 시도가 1회 수행되도록 negotiate 및 connect가\n" -"조합됩니다. 서비스가 응답하는지 자주 확인하고 훨씬 긴 간격으로 negotiate 확인" -"이 수행되는 경우에 유용합니다. ping은\n" -"<small>ICMP</small> ping을 사용하여 실제 서버의 가용성을 테스트함을 의미합니" -"다. ping은 <small>UDP</small> 서비스에 대한 연결 확인으로도 사용됩니다. off" -"는\n" -"확인이 수행되지 않으며 실제 또는 대체 서버가 활성화되지 않음을 의미합니다. on" -"은 확인이 수행되지 않으며 실제 서버가 항상\n" +"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate</b>|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n" +"</p><p>수행할 확인 유형입니다. negotiate는 요청을 보내고 수신 문자열을 일치시킵니다. connect는 <small>TCP/IP</small> 연결만 설정하려고 하므로\n" +"요청 및 수신 문자열을 생략할 수 있습니다. checktype이 숫자이면 각 N회 연결 시도 후에 협상 시도가 1회 수행되도록 negotiate 및 connect가\n" +"조합됩니다. 서비스가 응답하는지 자주 확인하고 훨씬 긴 간격으로 negotiate 확인이 수행되는 경우에 유용합니다. ping은\n" +"<small>ICMP</small> ping을 사용하여 실제 서버의 가용성을 테스트함을 의미합니다. ping은 <small>UDP</small> 서비스에 대한 연결 확인으로도 사용됩니다. off는\n" +"확인이 수행되지 않으며 실제 또는 대체 서버가 활성화되지 않음을 의미합니다. on은 확인이 수행되지 않으며 실제 서버가 항상\n" "활성화됨을 의미합니다. 기본값은 <i>negotiate</i>입니다.\n" "\n" "\n" -"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|" -"<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|" -"<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|" -"<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n" -"</p><p>checktype=negotiate를 사용할 때 모니터링할 서비스 유형입니다. none은 " -"모니터링되지 않는 서비스를 나타냅니다.\n" -"</p><p>simpletcp는 <b>request</b> 문자열을 서버로 보내고 <b>receive</b> " -"regexp에 대해 테스트합니다. 다른 유형의 확인은 지정된 프로토콜을 사용하여\n" -"서버에 연결합니다. 프로토콜별 정보는 <b>request</b> 및 <b>receive</b> 섹션을 " -"참조하십시오.\n" +"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n" +"</p><p>checktype=negotiate를 사용할 때 모니터링할 서비스 유형입니다. none은 모니터링되지 않는 서비스를 나타냅니다.\n" +"</p><p>simpletcp는 <b>request</b> 문자열을 서버로 보내고 <b>receive</b> regexp에 대해 테스트합니다. 다른 유형의 확인은 지정된 프로토콜을 사용하여\n" +"서버에 연결합니다. 프로토콜별 정보는 <b>request</b> 및 <b>receive</b> 섹션을 참조하십시오.\n" "</p><p>기본값:\n" "</p>

\n" "<dt>* 가상 서버 포트 21: ftp\n" @@ -895,8 +628,7 @@ "\n" "\n" "</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n" -"<p>이 설정은 checktype이 external인 경우에 유용하며 실제 서버의 상태를 확인하" -"기 위해 실행할 명령입니다. 모두 정상이면 상태 0으로\n" +"<p>이 설정은 checktype이 external인 경우에 유용하며 실제 서버의 상태를 확인하기 위해 실행할 명령입니다. 모두 정상이면 상태 0으로\n" "종료되어야 하고, 그렇지 않으면 0이 아닌 값으로 종료되어야 합니다.\n" "</p><p>다음 네 개의 파라미터가 스크립트에 전달됩니다.\n" "</p></dt><dt>* 가상 서버 IP/방화벽 표시\n" @@ -907,96 +639,69 @@ "\n" "\n" "<p><b><big>check port</big> =</b> <i>n</i>\n" -"</p><p>모니터링할 포트 수입니다. 확인 포트가 서비스 포트와 다른 경우도 있습니" -"다.\n" +"</p><p>모니터링할 포트 수입니다. 확인 포트가 서비스 포트와 다른 경우도 있습니다.\n" "</p><p>기본값: 각 실제 서버에 대해 지정된 포트\n" "\n" "\n" -"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"\n" -"</p><p>이 객체는 각 실제 서버에서 checkinterval 초마다 요청됩니다. 문자열은 " -"따옴표로 묶어야 합니다. 실제 서버 기반의 선택적 요청 문자열로\n" +"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n" +"</p><p>이 객체는 각 실제 서버에서 checkinterval 초마다 요청됩니다. 문자열은 따옴표로 묶어야 합니다. 실제 서버 기반의 선택적 요청 문자열로\n" "이 문자열을 무효화할 수 있습니다.\n" -"</p><p><small>DNS</small> 확인의 경우 조회할 A 레코드의 이름 또는 " -"<small>PTR</small> 레코드의 주소여야 합니다.\n" -"</p><p>MySQL, Oracle 또는 PostgeSQL 확인의 경우 <small>SQL</small> 쿼리여야 " -"합니다. 반환된 데이터는 확인되지 않고 응답이 하나 이상의 행인지만\n" +"</p><p><small>DNS</small> 확인의 경우 조회할 A 레코드의 이름 또는 <small>PTR</small> 레코드의 주소여야 합니다.\n" +"</p><p>MySQL, Oracle 또는 PostgeSQL 확인의 경우 <small>SQL</small> 쿼리여야 합니다. 반환된 데이터는 확인되지 않고 응답이 하나 이상의 행인지만\n" "확인됩니다. 이는 필수 설정입니다.\n" "</p><p>simpletcp 확인의 경우 \n" " 발생이 줄 바꿈 문자로 바뀌는 것을 제외하고 이 문자열이 그대로 전송됩니다.\n" "\n" "\n" "</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n" -"</p><p>요청된 결과에 이 <i>regexp to compare</i>가 포함된 경우 실제 서버가 활" -"성 상태로 선언됩니다. regexp는 따옴표로 묶어야 합니다.\n" -"regexps는 일반 문자열이 아니며 리터럴로 사용되어야 하는 경우 특수 문자를 이스" -"케이프해야 합니다. 이 regexp는 실제 서버 기반의 선택적\n" +"</p><p>요청된 결과에 이 <i>regexp to compare</i>가 포함된 경우 실제 서버가 활성 상태로 선언됩니다. regexp는 따옴표로 묶어야 합니다.\n" +"regexps는 일반 문자열이 아니며 리터럴로 사용되어야 하는 경우 특수 문자를 이스케이프해야 합니다. 이 regexp는 실제 서버 기반의 선택적\n" "수신 regexp에 의해 무효화될 수 있습니다.\n" -"</p><p><small>DNS</small> 확인의 경우 A 레코드의 주소 또는 <small>PTR 레코드 이름 중 하나여야 합니다.\n" +"</p><p><small>DNS</small> 확인의 경우 A 레코드의 주소 또는 <small>PTR</small> 레코드 이름 중 하나여야 합니다.\n" "</p><p>MySQL 확인의 경우 수신 설정이 사용되지 않습니다.\n" "\n" "\n" -"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</b>\n" -"</p><p>요청 문자열에 지정된 <small>URI</small>를 가져오기 위해 사용해야 하는 " -"<small>HTTP</small> 메소드입니다. <small>GET</small>은\n" -"파라미터가 설정되지 않은 경우 기본적으로 사용되는 메소드입니다. <small>HEAD가 사용된 경우 수신 문자열을 설정하면 안 됩니다.\n" +"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n" +"</p><p>요청 문자열에 지정된 <small>URI</small>를 가져오기 위해 사용해야 하는 <small>HTTP</small> 메소드입니다. <small>GET</small>은\n" +"파라미터가 설정되지 않은 경우 기본적으로 사용되는 메소드입니다. <small>HEAD</small>가 사용된 경우 수신 문자열을 설정하면 안 됩니다.\n" "</p><p>기본값: <small>GET</small>\n" "\n" "\n" "</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n" -"</p><p><small>HTTP</small> 또는 <small>HTTPS</small>와 함께 negotiate 확인을 " -"사용하는 경우에 사용됩니다. <small>HTTP</small> 요청에 사용되는 호스트 헤더" -"를 설정합니다.\n" -"<small>HTTPS</small>의 경우 일반적으로 <small>SSL</small> 인증서의 일반 이름" -"과 일치해야 합니다. 설정되지 않은 경우 실제 서버에 대한 요청 URL(있는 경우)에" -"서\n" -"호스트 헤더가 파생됩니다. 마지막 방법으로, 실제 서버의 <small>IP</small> 주소" -"가 사용됩니다.\n" +"</p><p><small>HTTP</small> 또는 <small>HTTPS</small>와 함께 negotiate 확인을 사용하는 경우에 사용됩니다. <small>HTTP</small> 요청에 사용되는 호스트 헤더를 설정합니다.\n" +"<small>HTTPS</small>의 경우 일반적으로 <small>SSL</small> 인증서의 일반 이름과 일치해야 합니다. 설정되지 않은 경우 실제 서버에 대한 요청 URL(있는 경우)에서\n" +"호스트 헤더가 파생됩니다. 마지막 방법으로, 실제 서버의 <small>IP</small> 주소가 사용됩니다.\n" "\n" "\n" "</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n" -"</p><p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, " -"Oracle, <small>POP</small> 및 PostgreSQL의 경우 로그인에 사용되는 사용자 이름" -"입니다.\n" +"</p><p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, Oracle, <small>POP</small> 및 PostgreSQL의 경우 로그인에 사용되는 사용자 이름입니다.\n" "</p><p>Radius의 경우 User-Name 특성에 passwd가 사용됩니다.\n" -"</p><p><small>SIP</small>의 경우 username이 <small>OPTIONS</small> 쿼리의 받" -"는 사람 및 보낸 사람 주소 둘 다로 사용됩니다.\n" +"</p><p><small>SIP</small>의 경우 username이 <small>OPTIONS</small> 쿼리의 받는 사람 및 보낸 사람 주소 둘 다로 사용됩니다.\n" "</p><p>기본값:\n" "</p></dt><dt>* <small>FTP:</small> Anonymous\n" "</dt><dt>* MySQL Oracle 및 PostgreSQL: 구성에서 지정해야 함\n" -"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, 아래 passwd 옵션" -"을 기준으로 hostname이 파생됨\n" +"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, 아래 passwd 옵션을 기준으로 hostname이 파생됨\n" "</dt><dt>* 기타: 빈 문자열. 인증이 시도되지 않음을 의미합니다.\n" "\n" "\n" "</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n" -"<p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, " -"Oracle, <small>POP</small>, PostgreSQL 및\n" +"<p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, Oracle, <small>POP</small>, PostgreSQL 및\n" "<small>SIP</small> 서버 로그인에 사용할 비밀번호입니다.\n" "</p><p>Radius의 경우 User-Password 특성에 passwd가 사용됩니다.\n" "</p><p>기본값:\n" -"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, 여기서 " -"hostname은 런타임에 평가되거나 설정되지 않은 경우 uname에서 소싱되는 환경 변" -"수\n" +"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, 여기서 hostname은 런타임에 평가되거나 설정되지 않은 경우 uname에서 소싱되는 환경 변수\n" "<small>HOSTNAME</small>입니다.\n" -"</dt><dt>* 기타: 빈 문자열. <small>LDAP</small>, MySQL, Oracle 및 PostgreSQL" -"의 경우 인증이 수행되지 않음을 의미합니다.\n" +"</dt><dt>* 기타: 빈 문자열. <small>LDAP</small>, MySQL, Oracle 및 PostgreSQL의 경우 인증이 수행되지 않음을 의미합니다.\n" "\n" "\n" "</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n" -"<p>MySQL, Oracle 및 PostgreSQL 서버에 사용할 데이터베이스입니다. 위의 " -"<b>receive</b>에서 설정된 쿼리를 수행할 데이터베이스입니다. 이는\n" +"<p>MySQL, Oracle 및 PostgreSQL 서버에 사용할 데이터베이스입니다. 위의 <b>receive</b>에서 설정된 쿼리를 수행할 데이터베이스입니다. 이는\n" "필수 설정입니다.\n" "\n" "\n" "</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n" -"</p><p>Radius 서버에 사용할 비밀입니다. 위의 <b>login</b>에서 설정된 " -"username 및 위의\n" -"<b>passwd</b>에서 설정된 passwd로 Access-Request를 수행하는 데 사용되는 비밀" -"입니다.\n" +"</p><p>Radius 서버에 사용할 비밀입니다. 위의 <b>login</b>에서 설정된 username 및 위의\n" +"<b>passwd</b>에서 설정된 passwd로 Access-Request를 수행하는 데 사용되는 비밀입니다.\n" "</p><p>기본값: 빈 문자열\n" "\n" "\n" @@ -1009,219 +714,191 @@ "\n" "\n" "</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n" -"</p><p>부하 분산을 위해 <small>LVS</small>에서 사용할 스케줄러입니다. 사용 가" -"능한 스케줄러에 대한 자세한 내용은 <b>ipvsadm</a></b>(8) " -"매뉴얼 페이지를 참조하십시오.\n" +"</p><p>부하 분산을 위해 <small>LVS</small>에서 사용할 스케줄러입니다. 사용 가능한 스케줄러에 대한 자세한 내용은 <b>ipvsadm</a></b>(8) 매뉴얼 페이지를 참조하십시오.\n" "</p><p>기본값: \"wrr\"\n" "\n" "\n" "</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n" -"</p><p>사용할 프로토콜입니다. virtual이 <small>IP</small> 주소 및 포트로 지정" -"된 경우 tcp 또는 udp 중 하나여야 합니다. firewall mark인 경우\n" +"</p><p>사용할 프로토콜입니다. virtual이 <small>IP</small> 주소 및 포트로 지정된 경우 tcp 또는 udp 중 하나여야 합니다. firewall mark인 경우\n" "protocol은 fwm이어야 합니다.\n" "</p><p>기본값:\n" -"</p></dt><dt>* Virtual이 <small>IP</small> 주소 및 포트이고 포트가 53: tcp가 " -"아님\n" +"</p></dt><dt>* Virtual이 <small>IP</small> 주소 및 포트이고 포트가 53: tcp가 아님\n" "</dt><dt>* Virtual이 <small>IP</small> 주소 및 포트이고 포트가 53: udp임\n" "</dt><dt>* Virtual이 firewall mark: fwm임\n" "</dt></dl>\n" "\n" "\n" "</p><p><b><big>check timeout</big> =</b> <i>n</i>\n" -"</p><p>connect, external 및 ping 확인 제한 시간(초)입니다. 제한 시간을 초과" -"한 경우 실제 서버가 비가동 상태로 선언됩니다.\n" +"</p><p>connect, external 및 ping 확인 제한 시간(초)입니다. 제한 시간을 초과한 경우 실제 서버가 비가동 상태로 선언됩니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 설정이 무효화됩니다.\n" -"</p><p>정의되지 않은 경우 negotiatetimeout 값이 사용됩니다. negotiatetimeout" -"도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" -"</p><p>checktimeout 및 negotiatetimeout이 둘 다 설정되지 않은 경우 기본값이 " -"사용됩니다.\n" +"</p><p>정의되지 않은 경우 negotiatetimeout 값이 사용됩니다. negotiatetimeout도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" +"</p><p>checktimeout 및 negotiatetimeout이 둘 다 설정되지 않은 경우 기본값이 사용됩니다.\n" "</p><p>기본값: 5초\n" "\n" "</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n" "</p><p>negotiate 확인에 대한 제한 시간(초)입니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" -"</p><p>정의되지 않은 경우 connecttimeout 값이 사용됩니다. connecttimeout도 가" -"상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" -"</p><p>negotiatetimeout 및 connecttimeout이 둘 다 설정되지 않은 경우 기본값" -"이 사용됩니다.\n" +"</p><p>정의되지 않은 경우 connecttimeout 값이 사용됩니다. connecttimeout도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n" +"</p><p>negotiatetimeout 및 connecttimeout이 둘 다 설정되지 않은 경우 기본값이 사용됩니다.\n" "</p><p>기본값: 30초\n" "\n" "</p><p><b><big>failure count</big> =</b> <i>n</i>\n" -"</p><p>실제 서버가 실패한 것으로 간주되기 전에 확인에서 실패를 보고해야 하는 " -"연속 횟수입니다. 값이 1이면 처음 실패 시 실제 서버가 실패한 것으로 간주됩니" -"다. 성공적으로 확인되면 실패 카운터가 0으로 재설정됩니다.\n" +"</p><p>실제 서버가 실패한 것으로 간주되기 전에 확인에서 실패를 보고해야 하는 연속 횟수입니다. 값이 1이면 처음 실패 시 실제 서버가 실패한 것으로 간주됩니다. 성공적으로 확인되면 실패 카운터가 0으로 재설정됩니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: 1\n" "\n" "</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n" -"</p><p>가상 서비스에 정의된 실제 서버에 변경된 연결 상태에 대한 경고를 보내" -"기 위한 유효한 전자 메일 주소입니다. 이 옵션을 사용하려면 perl\n" -"모듈 MailTools를 설치해야 합니다. 기본 제공 방법을 사용하여 자동으로 전자 메" -"일 전송을 시도합니다. 방법에 대한 자세한 내용은 perldoc Mail::Mailer를 참조하" -"십시오.\n" +"</p><p>가상 서비스에 정의된 실제 서버에 변경된 연결 상태에 대한 경고를 보내기 위한 유효한 전자 메일 주소입니다. 이 옵션을 사용하려면 perl\n" +"모듈 MailTools를 설치해야 합니다. 기본 제공 방법을 사용하여 자동으로 전자 메일 전송을 시도합니다. 방법에 대한 자세한 내용은 perldoc Mail::Mailer를 참조하십시오.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "\n" "</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n" -"</p><p>가상 서비스에 지정된 실제 서버에 액세스할 수 없는 동안 반복되는 전자 " -"메일 경고 사이의 지연(초)입니다. 0초를 설정하면\n" -"반복 경고가 사용되지 않습니다. 이 설정의 전자 메일 타이밍 정확도는 " -"checkinterval 구성 옵션에 정의된 시간(초)에 따라\n" +"</p><p>가상 서비스에 지정된 실제 서버에 액세스할 수 없는 동안 반복되는 전자 메일 경고 사이의 지연(초)입니다. 0초를 설정하면\n" +"반복 경고가 사용되지 않습니다. 이 설정의 전자 메일 타이밍 정확도는 checkinterval 구성 옵션에 정의된 시간(초)에 따라\n" "달라집니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: 0\n" "\n" -"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" -"</p><p>전자 메일 경고가 전송되어야 하는 서버 상태의 쉼표로 구분된 목록입니" -"다. <b>all</b>은\n" -"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\"을 나타냅" -"니다. <b>none</b>이 지정된 경우 다른 옵션을 지정할 수 없습니다. 그렇지 않으" -"면 옵션은 서로 or로\n" +"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n" +"</p><p>전자 메일 경고가 전송되어야 하는 서버 상태의 쉼표로 구분된 목록입니다. <b>all</b>은\n" +"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\"을 나타냅니다. <b>none</b>이 지정된 경우 다른 옵션을 지정할 수 없습니다. 그렇지 않으면 옵션은 서로 or로\n" "연결됩니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: all\n" "\n" -"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|" -"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" -"</p><p>실제 서버가 모두 다운된 경우 웹 서비스가 리디렉션되는 서버입니다. 일반" -"적으로 응급 페이지가 있는 127.0.0.1입니다.\n" +"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n" +"</p><p>실제 서버가 모두 다운된 경우 웹 서비스가 리디렉션되는 서버입니다. 일반적으로 응급 페이지가 있는 127.0.0.1입니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "\n" "</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n" -"</p><p><i>yes</i>인 경우 실제 또는 대체 서버가 다운된 것이 확인될 때 실제로 " -"커널의 <small>LVS</small> 테이블에서 제거되지 않습니다.\n" +"</p><p><i>yes</i>인 경우 실제 또는 대체 서버가 다운된 것이 확인될 때 실제로 커널의 <small>LVS</small> 테이블에서 제거되지 않습니다.\n" "대신 가중치가 0으로 설정되어 새 연결이 수락되지 않습니다.\n" -"</p><p>이 경우 실제 서버에 영구적 연결이 있으면 영구적 제한 시간이 만료될 때" -"까지 기존 클라이언트의 새 연결이 계속 실제 서버로 \n" -"라우팅되는 부작용이 있습니다. 영구적 연결에 대한 자세한 내용은 ipvsadm을 참조" -"하십시오.\n" +"</p><p>이 경우 실제 서버에 영구적 연결이 있으면 영구적 제한 시간이 만료될 때까지 기존 클라이언트의 새 연결이 계속 실제 서버로 \n" +"라우팅되는 부작용이 있습니다. 영구적 연결에 대한 자세한 내용은 ipvsadm을 참조하십시오.\n" "</p><p>다음을 실행하면 이 부작용을 방지할 수 있습니다.\n" "</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n" -"</p><p>proc 파일이 없는 경우 커널에 lvs 지원이 없거나, <small>LVS</small> 지" -"원이 로드되지 않았거나, 커널이 너무 오래되어\n" -"proc 파일을 포함할 수 없음을 의미합니다. 루트로 ipvsadm을 실행할 경우 가능하" -"면 <small>LVS</small>가 커널에 로드되어야 합니다.\n" -"</p><p><i>no</i>인 경우 실제 또는 대체 서버가 커널의 <small>LVS</small> 테이" -"블에서 제거됩니다. 기본값은 <i>yes</i>입니다.\n" +"</p><p>proc 파일이 없는 경우 커널에 lvs 지원이 없거나, <small>LVS</small> 지원이 로드되지 않았거나, 커널이 너무 오래되어\n" +"proc 파일을 포함할 수 없음을 의미합니다. 루트로 ipvsadm을 실행할 경우 가능하면 <small>LVS</small>가 커널에 로드되어야 합니다.\n" +"</p><p><i>no</i>인 경우 실제 또는 대체 서버가 커널의 <small>LVS</small> 테이블에서 제거됩니다. 기본값은 <i>yes</i>입니다.\n" "</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n" "</p><p>기본값: <i>yes</i>\n" "\n" "\n" "\n" -#. overwrite global value part -#: src/include/iplb/vserver_conf.rb:146 +#. overwrite global value part +#: src/include/iplb/vserver_conf.rb:146 msgid "Check Type" msgstr "확인 유형" -#: src/include/iplb/vserver_conf.rb:150 +#: src/include/iplb/vserver_conf.rb:150 msgid "Check Port" msgstr "확인 포트" -#: src/include/iplb/vserver_conf.rb:151 +#: src/include/iplb/vserver_conf.rb:151 msgid "Service" msgstr "서비스" -#: src/include/iplb/vserver_conf.rb:152 +#: src/include/iplb/vserver_conf.rb:152 msgid "Check Command" msgstr "확인 명령" -#: src/include/iplb/vserver_conf.rb:157 +#: src/include/iplb/vserver_conf.rb:157 msgid "Http Method" msgstr "HTTP 메소드" -#: src/include/iplb/vserver_conf.rb:160 +#: src/include/iplb/vserver_conf.rb:160 msgid "Request" msgstr "요청" -#: src/include/iplb/vserver_conf.rb:162 +#: src/include/iplb/vserver_conf.rb:162 msgid "Receive" msgstr "받기" -#: src/include/iplb/vserver_conf.rb:165 +#: src/include/iplb/vserver_conf.rb:165 msgid "Virtual Host" msgstr "가상 호스트" -#: src/include/iplb/vserver_conf.rb:177 +#: src/include/iplb/vserver_conf.rb:177 msgid "Login" msgstr "로그인" -#: src/include/iplb/vserver_conf.rb:178 +#: src/include/iplb/vserver_conf.rb:178 msgid "Password" msgstr "비밀번호" -#: src/include/iplb/vserver_conf.rb:180 +#: src/include/iplb/vserver_conf.rb:180 msgid "Database Name" msgstr "데이터베이스 이름" -#: src/include/iplb/vserver_conf.rb:181 +#: src/include/iplb/vserver_conf.rb:181 msgid "Radius Secret" msgstr "Radius 비밀" -#: src/include/iplb/vserver_conf.rb:199 +#: src/include/iplb/vserver_conf.rb:199 msgid "Persistent" msgstr "지속" -#: src/include/iplb/vserver_conf.rb:200 +#: src/include/iplb/vserver_conf.rb:200 msgid "Netmask" msgstr "넷마스크" -#: src/include/iplb/vserver_conf.rb:202 +#: src/include/iplb/vserver_conf.rb:202 msgid "Scheduler" msgstr "스케줄러" -#: src/include/iplb/vserver_conf.rb:211 +#: src/include/iplb/vserver_conf.rb:211 msgid "Protocol" msgstr "프로토콜" -#: src/include/iplb/vserver_conf.rb:231 +#: src/include/iplb/vserver_conf.rb:231 msgid "Virtual Servers" msgstr "가상 서버" -#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301 +#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301 msgid "Add" msgstr "추가" -#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303 +#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303 msgid "Edit" msgstr "편집" -#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302 +#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302 msgid "Delete" msgstr "삭제" -#. disable the delete & edit button if vserver box is empty -#: src/include/iplb/vserver_conf.rb:296 +#. disable the delete & edit button if vserver box is empty +#: src/include/iplb/vserver_conf.rb:296 msgid "Virtual Server" msgstr "가상 서버" -#: src/include/iplb/vserver_conf.rb:298 +#: src/include/iplb/vserver_conf.rb:298 msgid "Real Servers" msgstr "실제 서버" -#: src/include/iplb/vserver_conf.rb:310 +#: src/include/iplb/vserver_conf.rb:310 msgid "Check type" msgstr "확인 유형" -#: src/include/iplb/vserver_conf.rb:311 +#: src/include/iplb/vserver_conf.rb:311 msgid "Auth type" msgstr "인증 유형" -#: src/include/iplb/vserver_conf.rb:312 +#: src/include/iplb/vserver_conf.rb:312 msgid "Others" msgstr "기타" -#. return `cacel or a string -#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427 +#. return `cacel or a string +#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427 msgid "OK" msgstr "확인" -#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428 +#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428 msgid "Cancel" msgstr "취소" -#. split the real server ip value; -#: src/include/iplb/vserver_conf.rb:411 +#. split the real server ip value; +#: src/include/iplb/vserver_conf.rb:411 msgid "" "If using IPv6,the format should like this\n" "[fe80::5054:ff:fe00:2]" @@ -1229,98 +906,98 @@ "IPv6을 사용하는 경우 형식은 다음과 같습니다.\n" "[fe80::5054:ff:fe00:2]" -#: src/include/iplb/vserver_conf.rb:413 +#: src/include/iplb/vserver_conf.rb:413 msgid "Real Server's IP Address" msgstr "실제 서버의 IP 주소" -#: src/include/iplb/vserver_conf.rb:419 +#: src/include/iplb/vserver_conf.rb:419 msgid "Forward Method" msgstr "전달 방법" -#: src/include/iplb/vserver_conf.rb:422 +#: src/include/iplb/vserver_conf.rb:422 msgid "weight" msgstr "가중치" -#. find next ] -#: src/include/iplb/vserver_conf.rb:456 +#. find next ] +#: src/include/iplb/vserver_conf.rb:456 msgid "IP address is not Valid" msgstr "IP 주소가 잘못되었습니다." -#. tab switch events end -#: src/include/iplb/vserver_conf.rb:547 +#. tab switch events end +#: src/include/iplb/vserver_conf.rb:547 msgid "Add a new real server:" msgstr "새로운 실제 서버 추가:" -#: src/include/iplb/vserver_conf.rb:564 +#: src/include/iplb/vserver_conf.rb:564 msgid "Edit the real server:" msgstr "실제 서버 편집:" -#. Initialization dialog contents -#: src/include/iplb/wizards.rb:142 +#. Initialization dialog contents +#: src/include/iplb/wizards.rb:142 msgid "Initializing..." msgstr "초기화 중..." -#. Read all iplb settings -#. @return true on success -#: src/modules/Iplb.rb:214 +#. Read all iplb settings +#. @return true on success +#: src/modules/Iplb.rb:214 msgid "Initializing IPLB Configuration" msgstr "IPLB 구성 초기화" -#. Names of real stages -#: src/modules/Iplb.rb:221 +#. Names of real stages +#: src/modules/Iplb.rb:221 msgid "Read the global settings" msgstr "전역 설정 읽기" -#: src/modules/Iplb.rb:221 +#: src/modules/Iplb.rb:221 msgid "Read the virtual host settings" msgstr "가상 호스트 설정 읽기" -#: src/modules/Iplb.rb:223 +#: src/modules/Iplb.rb:223 msgid "Reading the global settings..." msgstr "전역 설정을 읽는 중입니다." -#: src/modules/Iplb.rb:224 +#: src/modules/Iplb.rb:224 msgid "Reading the virtual host settings..." msgstr "가상 호스트 설정을 읽는 중입니다." -#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330 +#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330 msgid "Finished" msgstr "완료됨" -#. Write all iplb settings -#. @return true on success -#: src/modules/Iplb.rb:320 +#. Write all iplb settings +#. @return true on success +#: src/modules/Iplb.rb:320 msgid "Saving IPLB Configuration" msgstr "IPLB 구성 저장" -#: src/modules/Iplb.rb:326 +#: src/modules/Iplb.rb:326 msgid "Write the settings" msgstr "세팅 기록" -#: src/modules/Iplb.rb:326 +#: src/modules/Iplb.rb:326 msgid "Run SuSEconfig" msgstr "SuSEconfig 실행" -#: src/modules/Iplb.rb:328 +#: src/modules/Iplb.rb:328 msgid "Writing the settings..." msgstr "세팅을 기록하고 있습니다..." -#: src/modules/Iplb.rb:329 +#: src/modules/Iplb.rb:329 msgid "Running SuSEconfig..." msgstr "SuSEconfig 실행중입니다..." -#. write global conf -#. check for ipv6 address to decide whether to add "6=" or "=" -#. string key's format -#. 192.168.6.241:89 or [2001:db8::5]:119 -#. only extract the 2001:db8::5 part from the key string -#. to check whether it is an ipv6 address; -#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405 +#. write global conf +#. check for ipv6 address to decide whether to add "6=" or "=" +#. string key's format +#. 192.168.6.241:89 or [2001:db8::5]:119 +#. only extract the 2001:db8::5 part from the key string +#. to check whether it is an ipv6 address; +#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405 msgid "Cannot write settings." msgstr "설정을 기록할 수 없습니다." -#. TODO FIXME: your code here... -#. Configuration summary text for autoyast -#: src/modules/Iplb.rb:441 +#. TODO FIXME: your code here... +#. Configuration summary text for autoyast +#: src/modules/Iplb.rb:441 msgid "Configuration summary..." msgstr "구성 요약..." Modified: branches/SLE12-SP3/yast/ko/po/iscsi-client.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/iscsi-client.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/iscsi-client.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,267 +14,260 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xiscsi-client module -#: src/clients/iscsi-client.rb:56 +#. Command line help text for the Xiscsi-client module +#: src/clients/iscsi-client.rb:56 msgid "Configuration of an iSCSI initiator" msgstr "iSCSI 이니시에이터 구성" -#. progress step title -#: src/clients/iscsi-client_finish.rb:69 +#. progress step title +#: src/clients/iscsi-client_finish.rb:69 msgid "Saving iSCSI configuration..." msgstr "iSCSI 구성 저장 중..." -#. Rich text title for IscsiClient in proposals -#: src/clients/iscsi-client_proposal.rb:85 +#. Rich text title for IscsiClient in proposals +#: src/clients/iscsi-client_proposal.rb:85 msgid "iSCSI Initiator" msgstr "iSCSI 이니시에이터" -#. Menu title for IscsiClient in proposals -#: src/clients/iscsi-client_proposal.rb:89 +#. Menu title for IscsiClient in proposals +#: src/clients/iscsi-client_proposal.rb:89 msgid "&iSCSI Initiator" msgstr "iSCSI 이니시에이터(&I)" -#. radio button (starting SLP service - option 1) -#: src/include/iscsi-client/dialogs.rb:64 +#. radio button (starting SLP service - option 1) +#: src/include/iscsi-client/dialogs.rb:64 msgid "When &Booting" msgstr "부팅 시(&B)" -#. radio button (starting SLP service - option 2) -#: src/include/iscsi-client/dialogs.rb:68 +#. radio button (starting SLP service - option 2) +#: src/include/iscsi-client/dialogs.rb:68 msgid "&Manually" msgstr "수동(&M)" -#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") -#: src/include/iscsi-client/dialogs.rb:74 +#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") +#: src/include/iscsi-client/dialogs.rb:74 msgid "When Booting" msgstr "부팅 시" -#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") -#: src/include/iscsi-client/dialogs.rb:76 +#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") +#: src/include/iscsi-client/dialogs.rb:76 msgid "Manually" msgstr "수동" -#: src/include/iscsi-client/dialogs.rb:86 +#: src/include/iscsi-client/dialogs.rb:86 msgid "iSNS Address" msgstr "iSNS 주소" -#: src/include/iscsi-client/dialogs.rb:87 +#: src/include/iscsi-client/dialogs.rb:87 msgid "iSNS Port" msgstr "iSNS 포트" -#. name of iscsi client (/etc/iscsi/initiatorname.iscsi) -#: src/include/iscsi-client/dialogs.rb:110 +#. name of iscsi client (/etc/iscsi/initiatorname.iscsi) +#: src/include/iscsi-client/dialogs.rb:110 msgid "&Initiator Name" msgstr "이니시에이터 이름(&I)" -#. prefer to not translate 'Offload' unless there is a well -#. known word for this technology (it's special hardware -#. shifting load from processor to card) -#: src/include/iscsi-client/dialogs.rb:119 +#. prefer to not translate 'Offload' unless there is a well +#. known word for this technology (it's special hardware +#. shifting load from processor to card) +#: src/include/iscsi-client/dialogs.rb:119 msgid "Offload Car&d" msgstr "오프로드 카드(&D)" -#. table of connected targets -#. table of discovered targets -#. dialog for all targets from portal (connected/disconnected) -#: src/include/iscsi-client/dialogs.rb:150 -#: src/include/iscsi-client/dialogs.rb:183 -#: src/include/iscsi-client/dialogs.rb:216 +#. table of connected targets +#. table of discovered targets +#. dialog for all targets from portal (connected/disconnected) +#: src/include/iscsi-client/dialogs.rb:150 +#: src/include/iscsi-client/dialogs.rb:183 +#: src/include/iscsi-client/dialogs.rb:216 msgid "Interface" msgstr "인터페이스" -#: src/include/iscsi-client/dialogs.rb:151 -#: src/include/iscsi-client/dialogs.rb:184 -#: src/include/iscsi-client/dialogs.rb:217 +#: src/include/iscsi-client/dialogs.rb:151 +#: src/include/iscsi-client/dialogs.rb:184 +#: src/include/iscsi-client/dialogs.rb:217 msgid "Portal Address" msgstr "포털 주소" -#: src/include/iscsi-client/dialogs.rb:152 -#: src/include/iscsi-client/dialogs.rb:185 -#: src/include/iscsi-client/dialogs.rb:218 +#: src/include/iscsi-client/dialogs.rb:152 +#: src/include/iscsi-client/dialogs.rb:185 +#: src/include/iscsi-client/dialogs.rb:218 msgid "Target Name" msgstr "대상 이름" -#: src/include/iscsi-client/dialogs.rb:153 -#: src/include/iscsi-client/dialogs.rb:219 +#: src/include/iscsi-client/dialogs.rb:153 +#: src/include/iscsi-client/dialogs.rb:219 msgid "Start-Up" msgstr "시작" -#: src/include/iscsi-client/dialogs.rb:159 +#: src/include/iscsi-client/dialogs.rb:159 msgid "Add" msgstr "추가" -#: src/include/iscsi-client/dialogs.rb:160 +#: src/include/iscsi-client/dialogs.rb:160 msgid "Edit" msgstr "편집" -#: src/include/iscsi-client/dialogs.rb:161 +#: src/include/iscsi-client/dialogs.rb:161 msgid "Disconnect" msgstr "연결 끊기" -#: src/include/iscsi-client/dialogs.rb:186 +#: src/include/iscsi-client/dialogs.rb:186 msgid "Connected" msgstr "연결됨" -#: src/include/iscsi-client/dialogs.rb:192 +#: src/include/iscsi-client/dialogs.rb:192 msgid "Discovery" msgstr "검색" -#: src/include/iscsi-client/dialogs.rb:193 -#: src/include/iscsi-client/dialogs.rb:223 +#: src/include/iscsi-client/dialogs.rb:193 +#: src/include/iscsi-client/dialogs.rb:223 msgid "Connect" msgstr "연결" -#. authentification dialog for add/discovery target -#: src/include/iscsi-client/dialogs.rb:238 +#. authentification dialog for add/discovery target +#: src/include/iscsi-client/dialogs.rb:238 msgid "No Discovery Authentication" msgstr "검색 인증 없음" -#: src/include/iscsi-client/dialogs.rb:241 -#: src/include/iscsi-client/dialogs.rb:275 +#: src/include/iscsi-client/dialogs.rb:241 +#: src/include/iscsi-client/dialogs.rb:275 msgid "Authentication by Initiator" msgstr "이니시에이터에 의한 인증" -#: src/include/iscsi-client/dialogs.rb:243 -#: src/include/iscsi-client/dialogs.rb:249 -#: src/include/iscsi-client/dialogs.rb:277 -#: src/include/iscsi-client/dialogs.rb:283 +#: src/include/iscsi-client/dialogs.rb:243 +#: src/include/iscsi-client/dialogs.rb:249 +#: src/include/iscsi-client/dialogs.rb:277 +#: src/include/iscsi-client/dialogs.rb:283 msgid "Username" msgstr "사용자 이름" -#: src/include/iscsi-client/dialogs.rb:244 -#: src/include/iscsi-client/dialogs.rb:250 -#: src/include/iscsi-client/dialogs.rb:278 -#: src/include/iscsi-client/dialogs.rb:284 +#: src/include/iscsi-client/dialogs.rb:244 +#: src/include/iscsi-client/dialogs.rb:250 +#: src/include/iscsi-client/dialogs.rb:278 +#: src/include/iscsi-client/dialogs.rb:284 msgid "Password" msgstr "패스워드" -#: src/include/iscsi-client/dialogs.rb:247 -#: src/include/iscsi-client/dialogs.rb:281 +#: src/include/iscsi-client/dialogs.rb:247 +#: src/include/iscsi-client/dialogs.rb:281 msgid "Authentication by Targets" msgstr "대상에 의한 인증" -#. authentication dialog for add target -#: src/include/iscsi-client/dialogs.rb:272 +#. authentication dialog for add target +#: src/include/iscsi-client/dialogs.rb:272 msgid "No Login Authentication" msgstr "로그인 인증 없음" -#. "handle" : handleDiscAuth, -#: src/include/iscsi-client/dialogs.rb:301 +#. "handle" : handleDiscAuth, +#: src/include/iscsi-client/dialogs.rb:301 msgid "Startup" msgstr "시작" -#. iSCSI target has to be connected manually -#: src/include/iscsi-client/dialogs.rb:304 +#. iSCSI target has to be connected manually +#: src/include/iscsi-client/dialogs.rb:304 msgid "manual" msgstr "수동" -#. iSCSI target available at boot (respected by 'dracut') -#: src/include/iscsi-client/dialogs.rb:306 +#. iSCSI target available at boot (respected by 'dracut') +#: src/include/iscsi-client/dialogs.rb:306 msgid "onboot" msgstr "onboot" -#. iSCSI target enabled automatically (by 'systemd') -#: src/include/iscsi-client/dialogs.rb:308 +#. iSCSI target enabled automatically (by 'systemd') +#: src/include/iscsi-client/dialogs.rb:308 msgid "automatic" msgstr "자동" -#. widget for portal address -#: src/include/iscsi-client/dialogs.rb:315 +#. widget for portal address +#: src/include/iscsi-client/dialogs.rb:315 msgid "IP Address" msgstr "IP 주소" -#: src/include/iscsi-client/dialogs.rb:316 +#: src/include/iscsi-client/dialogs.rb:316 msgid "Port" msgstr "포트" -#: src/include/iscsi-client/dialogs.rb:331 +#: src/include/iscsi-client/dialogs.rb:331 msgid "Key" msgstr "키(&K)" -#: src/include/iscsi-client/dialogs.rb:331 +#: src/include/iscsi-client/dialogs.rb:331 msgid "Value" msgstr "값" -#. service status dialog -#: src/include/iscsi-client/dialogs.rb:342 +#. service status dialog +#: src/include/iscsi-client/dialogs.rb:342 msgid "Service" msgstr "서비스" -#. list og connected targets -#: src/include/iscsi-client/dialogs.rb:365 +#. list og connected targets +#: src/include/iscsi-client/dialogs.rb:365 msgid "Connected Targets" msgstr "연결된 대상" -#. list of discovered targets -#: src/include/iscsi-client/dialogs.rb:373 +#. list of discovered targets +#: src/include/iscsi-client/dialogs.rb:373 msgid "Discovered Targets" msgstr "검색된 대상" -#. main tabbed dialog -#: src/include/iscsi-client/dialogs.rb:392 +#. main tabbed dialog +#: src/include/iscsi-client/dialogs.rb:392 msgid "iSCSI Initiator Overview" msgstr "iSCSI 이니시에이터 개요" -#. discovery new target -#. dialog for all targets from portal (connected/disconnected) -#. authentification dialog for add/discovery target -#: src/include/iscsi-client/dialogs.rb:407 -#: src/include/iscsi-client/helps.rb:112 -#: src/include/iscsi-client/helps.rb:123 -#: src/include/iscsi-client/helps.rb:130 +#. discovery new target +#. dialog for all targets from portal (connected/disconnected) +#. authentification dialog for add/discovery target +#: src/include/iscsi-client/dialogs.rb:407 +#: src/include/iscsi-client/helps.rb:112 src/include/iscsi-client/helps.rb:123 +#: src/include/iscsi-client/helps.rb:130 msgid "<h1>iSCSI Initiator</h1>" msgstr "<h1>iSCSI 이니시에이터</h1>" -#. authentication dialog for add new target -#. list of connected targets -#. authentication for connect to portal -#: src/include/iscsi-client/dialogs.rb:442 -#: src/include/iscsi-client/dialogs.rb:481 -#: src/include/iscsi-client/dialogs.rb:507 +#. authentication dialog for add new target +#. list of connected targets +#. authentication for connect to portal +#: src/include/iscsi-client/dialogs.rb:442 +#: src/include/iscsi-client/dialogs.rb:481 +#: src/include/iscsi-client/dialogs.rb:507 msgid "iSCSI Initiator Discovery" msgstr "iSCSI 이니시에이터 검색" -#. encoding: utf-8 -#. |*************************************************************************** -#. | -#. | Copyright (c) [2012] Novell, Inc. -#. | All Rights Reserved. -#. | -#. | This program is free software; you can redistribute it and/or -#. | modify it under the terms of version 2 of the GNU General Public License as -#. | published by the Free Software Foundation. -#. | -#. | This program is distributed in the hope that it will be useful, -#. | but WITHOUT ANY WARRANTY; without even the implied warranty of -#. | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. | GNU General Public License for more details. -#. | -#. | You should have received a copy of the GNU General Public License -#. | along with this program; if not, contact Novell, Inc. -#. | -#. | To contact Novell about this file by physical or electronic mail, -#. | you may find current contact information at www.novell.com -#. | -#. |*************************************************************************** -#. File: include/iscsi-client/helps.ycp -#. Package: Configuration of iscsi-client -#. Summary: Help texts of all the dialogs -#. Authors: Michal Zugec -#. -#. $Id$ -#: src/include/iscsi-client/helps.rb:35 -msgid "" -"If authentication is needed for secure access, please use <b>Authentication " -"by Initiator</b> and <b>Authentication by Targets</b> together. Please do " -"not only use one of them for security reasons.\n" -msgstr "" -"보안 액세스를 위해 인증이 필요한 경우 <b>이니시에이터에 의한 인증</b> 및 <b>" -"대상에 의한 인증</b>을 함께 사용하십시오. 보안상의 이유로 둘 중 하나만 사용하" -"지 마십시오.\n" +#. encoding: utf-8 +#. |*************************************************************************** +#. | +#. | Copyright (c) [2012] Novell, Inc. +#. | All Rights Reserved. +#. | +#. | This program is free software; you can redistribute it and/or +#. | modify it under the terms of version 2 of the GNU General Public License as +#. | published by the Free Software Foundation. +#. | +#. | This program is distributed in the hope that it will be useful, +#. | but WITHOUT ANY WARRANTY; without even the implied warranty of +#. | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. | GNU General Public License for more details. +#. | +#. | You should have received a copy of the GNU General Public License +#. | along with this program; if not, contact Novell, Inc. +#. | +#. | To contact Novell about this file by physical or electronic mail, +#. | you may find current contact information at www.novell.com +#. | +#. |*************************************************************************** +#. File: include/iscsi-client/helps.ycp +#. Package: Configuration of iscsi-client +#. Summary: Help texts of all the dialogs +#. Authors: Michal Zugec +#. +#. $Id$ +#: src/include/iscsi-client/helps.rb:35 +msgid "If authentication is needed for secure access, please use <b>Authentication by Initiator</b> and <b>Authentication by Targets</b> together. Please do not only use one of them for security reasons.\n" +msgstr "보안 액세스를 위해 인증이 필요한 경우 <b>이니시에이터에 의한 인증</b> 및 <b>대상에 의한 인증</b>을 함께 사용하십시오. 보안상의 이유로 둘 중 하나만 사용하지 마십시오.\n" -#. Read dialog help 1/2 -#: src/include/iscsi-client/helps.rb:40 +#. Read dialog help 1/2 +#: src/include/iscsi-client/helps.rb:40 msgid "" "<p><b><big>Initializing iSCSI Initiator Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -282,8 +275,8 @@ "<p><b><big>iSCSI 이니시에이터 구성 초기화 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/iscsi-client/helps.rb:44 +#. Read dialog help 2/2 +#: src/include/iscsi-client/helps.rb:44 msgid "" "<p><b><big>Aborting Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -291,8 +284,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/iscsi-client/helps.rb:48 +#. Write dialog help 1/2 +#: src/include/iscsi-client/helps.rb:48 msgid "" "<p><b><big>Saving iSCSI Initiator Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -300,8 +293,8 @@ "<p><b><big>iSCSI 이니시에이터 구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/iscsi-client/helps.rb:52 +#. Write dialog help 2/2 +#: src/include/iscsi-client/helps.rb:52 msgid "" "<p><b><big>Aborting Saving</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -313,8 +306,8 @@ " 대화 상자가 추가로 나타나서 지금 중단하는 것이 안전한지 알려줍니다.\n" " </p>\n" -#. Summary dialog help 1/3 -#: src/include/iscsi-client/helps.rb:59 +#. Summary dialog help 1/3 +#: src/include/iscsi-client/helps.rb:59 msgid "" "<p><b><big>iSCSI Initiator Configuration</big></b><br>\n" "Configure an iSCSI initiator here.<br></p>\n" @@ -322,8 +315,8 @@ "<p><b><big>iSCSI 이니시에이터 구성</big></b><br>\n" "여기에서 iSCSI 이니시에이터를 구성합니다.<br></p>\n" -#. Summary dialog help 2/3 -#: src/include/iscsi-client/helps.rb:63 +#. Summary dialog help 2/3 +#: src/include/iscsi-client/helps.rb:63 msgid "" "<p><b><big>Adding an iSCSI Initiator</big></b><br>\n" "Select an iSCSI initiator from the list of detected initiators.\n" @@ -332,12 +325,11 @@ msgstr "" "<p><b><big>iSCSI 이니시에이터 추가</big></b><br>\n" "검색된 이니시에이터 목록에서 iSCSI 이니시에이터를 선택합니다.\n" -" 해당 iSCSI 이니시에이터가 검색되지 않았으면 <b>기타(검색안됨)</b>를 사용하십" -"시오.\n" +" 해당 iSCSI 이니시에이터가 검색되지 않았으면 <b>기타(검색안됨)</b>를 사용하십시오.\n" " 그런 다음 <b>구성</b>을 누르십시오.</p>\n" -#. Summary dialog help 3/3 -#: src/include/iscsi-client/helps.rb:70 +#. Summary dialog help 3/3 +#: src/include/iscsi-client/helps.rb:70 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -347,8 +339,8 @@ "<b>편집</b>을 누르면 구성을 변경할 수 있는\n" " 대화 상자가 추가로 열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/iscsi-client/helps.rb:76 +#. Ovreview dialog help 1/3 +#: src/include/iscsi-client/helps.rb:76 msgid "" "<p><b><big>iSCSI Initiator Configuration Overview</big></b><br>\n" "Obtain an overview of installed iSCSI initiators. Additionally\n" @@ -358,8 +350,8 @@ "설치된 iSCSI 이니시에이터의 개요를 볼 수 있습니다. 또한\n" " 구성을 편집할 수도 있습니다.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/iscsi-client/helps.rb:82 +#. Ovreview dialog help 2/3 +#: src/include/iscsi-client/helps.rb:82 msgid "" "<p><b><big>Adding an iSCSI Initiator</big></b><br>\n" "Press <b>Add</b> to configure an iSCSI initiator.</p>\n" @@ -367,8 +359,8 @@ "<p><b><big>iSCSI 이니시에이터 추가</big></b><br>\n" "iSCSI 이니시에이터를 구성하려면 <b>추가</b>를 누르십시오.</p>\n" -#. Ovreview dialog help 3/3 -#: src/include/iscsi-client/helps.rb:86 +#. Ovreview dialog help 3/3 +#: src/include/iscsi-client/helps.rb:86 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "Choose an iSCSI Initiator to change or remove.\n" @@ -378,62 +370,38 @@ "변경 또는 제거할 iSCSI 이니시에이터를 선택하십시오.\n" " 그런 다음 <b>편집</b> 또는 <b>삭제</b>를 누르십시오.</p>\n" -#. table of connected targets -#: src/include/iscsi-client/helps.rb:92 -msgid "" -"<p>List of current sessions.</p><p>Use the <b>Add</b> button to get " -"additional targets. A discovery is started to detect new targets and the " -"start-up mode of already connected targets keeps unchanged.<br>Use " -"<b>Disconnect</b> to cancel the connection and with it remove the target " -"from the list.<br>To change the start-up status, press <b>Edit</b>.</p>" -msgstr "" -"<p>현재 세션 목록입니다.</p><p><b>추가</b> 버튼을 사용하여 대상을 추가로 가져" -"옵니다. 새로운 대상 감지를 위한 검색이 시작되었으며 이미 연결된 대상의 시작 " -"모드는 변경되지 않습니다.<br>연결을 끊고 목록에서 대상을 제거하려면 <b>연결 " -"끊기</b>를 사용하십시오.<br>시작 상태를 변경하려면 <b>편집</b>을 누르십시오." -"</p>" +#. table of connected targets +#: src/include/iscsi-client/helps.rb:92 +msgid "<p>List of current sessions.</p><p>Use the <b>Add</b> button to get additional targets. A discovery is started to detect new targets and the start-up mode of already connected targets keeps unchanged.<br>Use <b>Disconnect</b> to cancel the connection and with it remove the target from the list.<br>To change the start-up status, press <b>Edit</b>.</p>" +msgstr "<p>현재 세션 목록입니다.</p><p><b>추가</b> 버튼을 사용하여 대상을 추가로 가져옵니다. 새로운 대상 감지를 위한 검색이 시작되었으며 이미 연결된 대상의 시작 모드는 변경되지 않습니다.<br>연결을 끊고 목록에서 대상을 제거하려면 <b>연결 끊기</b>를 사용하십시오.<br>시작 상태를 변경하려면 <b>편집</b>을 누르십시오.</p>" -#. Warning -#. Warning -#: src/include/iscsi-client/helps.rb:101 -#: src/include/iscsi-client/helps.rb:118 +#. Warning +#. Warning +#: src/include/iscsi-client/helps.rb:101 src/include/iscsi-client/helps.rb:118 msgid "<h1>Warning</h1>" msgstr "<h1>경고</h1>" -#: src/include/iscsi-client/helps.rb:102 -#: src/include/iscsi-client/helps.rb:119 -msgid "" -"<p>When accessing an iSCSI device <b>READ</b>/<b>WRITE</b>, make sure that " -"this access is exclusive. Otherwise there is a potential risk of data " -"corruption.</p>\n" -msgstr "" -"<p>iSCSI 장치에 <b>읽기</b>/<b>쓰기</b> 액세스를 할 때에는 단독으로 액세스해" -"야 합니다. 그렇게 하지 않으면 데이터가 손상될 위험이 있습니다.</p>\n" +#: src/include/iscsi-client/helps.rb:102 src/include/iscsi-client/helps.rb:119 +msgid "<p>When accessing an iSCSI device <b>READ</b>/<b>WRITE</b>, make sure that this access is exclusive. Otherwise there is a potential risk of data corruption.</p>\n" +msgstr "<p>iSCSI 장치에 <b>읽기</b>/<b>쓰기</b> 액세스를 할 때에는 단독으로 액세스해야 합니다. 그렇게 하지 않으면 데이터가 손상될 위험이 있습니다.</p>\n" -#: src/include/iscsi-client/helps.rb:105 +#: src/include/iscsi-client/helps.rb:105 msgid "" -"<p><b>Initiator Name</b> is a value from <tt>/etc/iscsi/initiatorname.iscsi. \n" -"In case you have iBFT, this value will be added from there and you are only " -"able to change it in the BIOS setup.</p>" +"<p><b>Initiator Name</b> is a value from <tt>/etc/iscsi/initiatorname.iscsi</tt>. \n" +"In case you have iBFT, this value will be added from there and you are only able to change it in the BIOS setup.</p>" msgstr "" -"<p><b>Initiator Name</b>은 <tt>/etc/iscsi/initiatorname.iscsi</tt>의 값입니" -"다. \n" -"iBFT가 있는 경우 이 값은 해당 위치에서 추가되고 BIOS 설정에서만 변경할 수 있" -"습니다.</p>" +"<p><b>Initiator Name</b>은 <tt>/etc/iscsi/initiatorname.iscsi</tt>의 값입니다. \n" +"iBFT가 있는 경우 이 값은 해당 위치에서 추가되고 BIOS 설정에서만 변경할 수 있습니다.</p>" -#: src/include/iscsi-client/helps.rb:108 +#: src/include/iscsi-client/helps.rb:108 msgid "" -"If you want to use <b>iSNS</b> (Internet Storage Name Service) for " -"discovering targets instead of the default SendTargets method,\n" -"fill in the IP address of the iSNS server and port. The default port should " -"be 3205.\n" +"If you want to use <b>iSNS</b> (Internet Storage Name Service) for discovering targets instead of the default SendTargets method,\n" +"fill in the IP address of the iSNS server and port. The default port should be 3205.\n" msgstr "" -"대상을 검색하기 위해 기존 SendTargets 메소드 대신 <b>iSNS</b>(Internet " -"Storage Name Service)를 사용하려면\n" +"대상을 검색하기 위해 기존 SendTargets 메소드 대신 <b>iSNS</b>(Internet Storage Name Service)를 사용하려면\n" "iSNS 서버의 IP 주소와 포트를 지정하십시오. 기본 포트는 3205입니다.\n" -#: src/include/iscsi-client/helps.rb:113 +#: src/include/iscsi-client/helps.rb:113 msgid "" "Enter the <b>IP Address</b> of the iSCSI target server.\n" "Only change <b>Port</b>. If you do not need authentication,\n" @@ -444,131 +412,97 @@ "<b>검색 인증 없음</b>을 선택하십시오.\n" " " -#: src/include/iscsi-client/helps.rb:126 -msgid "" -"List of nodes offered by the iSCSI target. Select one item and click " -"<b>Connect</b>. " -msgstr "" -"iSCSI 대상에서 제공한 노드 목록입니다. 항목 하나를 선택하고 <b>연결</b>을 클" -"릭하십시오." +#: src/include/iscsi-client/helps.rb:126 +msgid "List of nodes offered by the iSCSI target. Select one item and click <b>Connect</b>. " +msgstr "iSCSI 대상에서 제공한 노드 목록입니다. 항목 하나를 선택하고 <b>연결</b>을 클릭하십시오." -#: src/include/iscsi-client/helps.rb:133 +#: src/include/iscsi-client/helps.rb:133 msgid "<h1>Startup</h1>" msgstr "<h1>시작</h1>" -#: src/include/iscsi-client/helps.rb:134 +#: src/include/iscsi-client/helps.rb:134 msgid "" "<p><b>manual</b> is for iSCSI targets which are not to be connected by\n" "default, the user needs to connect them manually</p>\n" -"<p><b>onboot</b> is for iSCSI targets to be connected during boot, i.e. " -"when\n" +"<p><b>onboot</b> is for iSCSI targets to be connected during boot, i.e. when\n" "root is on iSCSI. As such it will be evaluated by the initrd.</p>\n" -"<p><b>automatic</b> is for iSCSI targets to be connected when the iSCSI " -"service\n" +"<p><b>automatic</b> is for iSCSI targets to be connected when the iSCSI service\n" "starts up.</p>\n" msgstr "" "<p><b>manual</b>은 기본적으로 연결되지 않은 iSCSI 대상에\n" "사용되며 사용자가 수동으로 연결해야 합니다.</p>\n" "<p><b>onboot</b>는 부팅 중, 즉\n" -"루트가 iSCSI에 있는 경우 연결할 iSCSI 대상에 사용됩니다. 따라서 initrd에 의" -"해 평가됩니다.</p>\n" +"루트가 iSCSI에 있는 경우 연결할 iSCSI 대상에 사용됩니다. 따라서 initrd에 의해 평가됩니다.</p>\n" "<p><b>automatic</b>은 iSCSI 서비스가 시작될 때 연결할 iSCSI 대상에\n" "사용됩니다.</p>\n" -#: src/include/iscsi-client/helps.rb:142 +#: src/include/iscsi-client/helps.rb:142 msgid "<h1>Authentication</h1>" msgstr "<h1>인증</h1>" -#: src/include/iscsi-client/helps.rb:143 -msgid "" -"<p>The default setting here is <i>No Authentication</i>. Uncheck the " -"checkbox if authentication is needed for security reasons." -msgstr "" -"<p>여기서 기본 설정은 <i>인증 없음</i>입니다. 보안상의 이유로 인증이 필요한 " -"경우 확인란 선택을 해제하십시오." +#: src/include/iscsi-client/helps.rb:143 +msgid "<p>The default setting here is <i>No Authentication</i>. Uncheck the checkbox if authentication is needed for security reasons." +msgstr "<p>여기서 기본 설정은 <i>인증 없음</i>입니다. 보안상의 이유로 인증이 필요한 경우 확인란 선택을 해제하십시오." -#. list of discovered targets -#: src/include/iscsi-client/helps.rb:148 -msgid "" -"<p>This screen shows the list of discovered targets.</p><p>Use the " -"<b>Discovery</b> button to get available iSCSI targets from a server " -"specified by IP address.<br><b>Connect</b> to a target to establih the " -"connection. If login was successful the column <i>Connected</i> shows status " -"'True' and the target will appear on the <i>Connected Targets</i> screen." -"<br>To remove a target use the <b>Delete</b> button.<br> <b>Hint:</b> " -"Removing of targets is only possible for not connected onces. If required, " -"<b>Disconnect</b> at <i>Connected Targets</i> first.</p><p><b>Please note: Starting the <b>Discovery</b> again means doing a re-discovery of targets " -"which possibly will change the start-up mode of already connected targets " -"(to default 'manual'). Switch to <i>Connected Targets</i> screen and use the " -"<b>Add</b> button if you want to add new targets without changing the start-" -"up mode.</p>" -msgstr "" -"<p>이 화면은 발견된 대상 목록을 보여줍니다.</p><p><b>검색</b> 버튼을 사용하" -"여 IP 주소로 지정된 서버에서 모든 이용 가능한 iSCSI 대상을 가져오십시오.<br>" -"대상에 <b>연결</b>하여 연결을 설정하십시오. 로그인이 성공하면 <i>연결됨</i> " -"컬럼 상태가 'True'가 되고 대상이 <i>연결된 대상</i> 화면에 표시됩니다. <br>대" -"상을 제거하려면 <b>삭제</b> 버튼을 사용합니다.<br> <b>힌트:</b> 연결되지 않" -"은 대상만 한 번 제거할 수 있습니다. 필요한 경우 먼저 <i>연결된 대상</i> 목록" -"에서 <b>연결 끊기</b>를 하십시오.</p><p><b>참고:</b> <b>검색</b>을 다시 시작" -"하면 대상을 다시 검색하므로 이미 연결된 대상의 시작 모드가 변경될 수 있습니다" -"(기본 '수동' 모드로 변경). 시작 모드 변경 없이 새로운 대상을 추가하려면 <i>연" -"결된 대상</i> 화면으로 전환하고 <b>추가</b> 버튼을 사용하십시오.</p>" +#. list of discovered targets +#: src/include/iscsi-client/helps.rb:148 +msgid "<p>This screen shows the list of discovered targets.</p><p>Use the <b>Discovery</b> button to get available iSCSI targets from a server specified by IP address.<br><b>Connect</b> to a target to establih the connection. If login was successful the column <i>Connected</i> shows status 'True' and the target will appear on the <i>Connected Targets</i> screen.<br>To remove a target use the <b>Delete</b> button.<br> <b>Hint:</b> Removing of targets is only possible for not connected onces. If required, <b>Disconnect</b> at <i>Connected Targets</i> first.</p><p><b>Please note:</b> Starting the <b>Discovery</b> again means doing a re-discovery of targets which possibly will change the start-up mode of already connected targets (to default 'manual'). Switch to <i>Connected Targets</i> screen and use the <b>Add</b> button if you want to add new targets without changing the start-up mode.</p>" +msgstr "<p>이 화면은 발견된 대상 목록을 보여줍니다.</p><p><b>검색</b> 버튼을 사용하여 IP 주소로 지정된 서버에서 모든 이용 가능한 iSCSI 대상을 가져오십시오.<br>대상에 <b>연결</b>하여 연결을 설정하십시오. 로그인이 성공하면 <i>연결됨</i> 컬럼 상태가 'True'가 되고 대상이 <i>연결된 대상</i> 화면에 표시됩니다. <br>대상을 제거하려면 <b>삭제</b> 버튼을 사용합니다.<br> <b>힌트:</b> 연결되지 않은 대상만 한 번 제거할 수 있습니다. 필요한 경우 먼저 <i>연결된 대상</i> 목록에서 <b>연결 끊기</b>를 하십시오.</p><p><b>참고:</b> <b>검색</b>을 다시 시작하면 대상을 다시 검색하므로 이미 연결된 대상의 시작 모드가 변경될 수 있습니다(기본 '수동' 모드로 변경). 시작 모드 변경 없이 새로운 대상을 추가하려면 <i>연결된 대상</i> 화면으로 전환하고 <b>추가</b> 버튼� � 사용하십시오.</p>" -#: src/include/iscsi-client/helps.rb:164 +#: src/include/iscsi-client/helps.rb:164 msgid "<h1>iBTF</h1>" msgstr "<h1>iBTF</h1>" -#. string initiatorname=""; -#. function for run command in background -#: src/include/iscsi-client/widgets.rb:65 +#. string initiatorname=""; +#. function for run command in background +#: src/include/iscsi-client/widgets.rb:65 msgid "Command timed out" msgstr "명령 시간 제한" -#. validation for authentication dialog entry -#: src/include/iscsi-client/widgets.rb:123 -#: src/include/iscsi-client/widgets.rb:135 +#. validation for authentication dialog entry +#: src/include/iscsi-client/widgets.rb:123 +#: src/include/iscsi-client/widgets.rb:135 msgid "Insert the username." msgstr "사용자 이름을 입력하십시오." -#: src/include/iscsi-client/widgets.rb:128 -#: src/include/iscsi-client/widgets.rb:140 +#: src/include/iscsi-client/widgets.rb:128 +#: src/include/iscsi-client/widgets.rb:140 msgid "Insert the password." msgstr "비밀번호를 입력하십시오." -#. init table of connected sessions -#: src/include/iscsi-client/widgets.rb:152 +#. init table of connected sessions +#: src/include/iscsi-client/widgets.rb:152 msgid "Error While Connecting iscsid" msgstr "iscsid에 연결하는 동안 오류가 발생했습니다." -#. delete (logout from) connected target -#: src/include/iscsi-client/widgets.rb:214 +#. delete (logout from) connected target +#: src/include/iscsi-client/widgets.rb:214 msgid "Really log out from the selected target?" msgstr "선택한 대상에서 로그아웃하시겠습니까?" -#: src/include/iscsi-client/widgets.rb:218 +#: src/include/iscsi-client/widgets.rb:218 msgid "Error occurred while logging out from the selected target." msgstr "선택한 대상에서 로그아웃하는 동안 오류가 발생했습니다." -#: src/include/iscsi-client/widgets.rb:228 +#: src/include/iscsi-client/widgets.rb:228 msgid "No record found." msgstr "레코드를 찾을 수 없습니다." -#. if nothing selected - disable some buttons, otherwise enable them -#: src/include/iscsi-client/widgets.rb:270 +#. if nothing selected - disable some buttons, otherwise enable them +#: src/include/iscsi-client/widgets.rb:270 msgid "No valid IP address" msgstr "IP 주소가 잘못됨" -#: src/include/iscsi-client/widgets.rb:275 +#: src/include/iscsi-client/widgets.rb:275 msgid "Port field cannot be empty" msgstr "포트 필드는 비워둘 수 없음" -#. regexp for "cz.suse" or just "suse", "cz.su-se" -#: src/include/iscsi-client/widgets.rb:393 +#. regexp for "cz.suse" or just "suse", "cz.su-se" +#: src/include/iscsi-client/widgets.rb:393 msgid "Incorrect Initiator Name" msgstr "잘못된 이니시에이터 이름" -#: src/include/iscsi-client/widgets.rb:394 +#: src/include/iscsi-client/widgets.rb:394 msgid "" "\n" "The correct syntax is\n" @@ -590,151 +524,144 @@ "\n" "이 이름을 사용하시겠습니까?\n" -#. validate ip -#: src/include/iscsi-client/widgets.rb:572 +#. validate ip +#: src/include/iscsi-client/widgets.rb:572 msgid "Insert the IP address." msgstr "IP 주소를 입력하십시오." -#. check for valid host name -#: src/include/iscsi-client/widgets.rb:584 +#. check for valid host name +#: src/include/iscsi-client/widgets.rb:584 msgid "Please check IP address resp. host name.\n" msgstr "IP 주소 응답자와 호스트 이름을 확인하십시오.\n" -#. validate port number -#: src/include/iscsi-client/widgets.rb:596 +#. validate port number +#: src/include/iscsi-client/widgets.rb:596 msgid "Insert the port." msgstr "포트를 입력하십시오." -#. string record = deletechars(row_in_string[0]:"", "[]"); -#. ******************* target table ************************* -#. initialize dialog for all targets from portal (connected/disconnected) -#. enable/disable connect button according target is or not already connected -#: src/include/iscsi-client/widgets.rb:717 -#: src/include/iscsi-client/widgets.rb:822 -#: src/include/iscsi-client/widgets.rb:850 +#. string record = deletechars(row_in_string[0]:"", "[]"); +#. ******************* target table ************************* +#. initialize dialog for all targets from portal (connected/disconnected) +#. enable/disable connect button according target is or not already connected +#: src/include/iscsi-client/widgets.rb:717 +#: src/include/iscsi-client/widgets.rb:822 +#: src/include/iscsi-client/widgets.rb:850 msgid "True" msgstr "참" -#: src/include/iscsi-client/widgets.rb:717 -#: src/include/iscsi-client/widgets.rb:822 +#: src/include/iscsi-client/widgets.rb:717 +#: src/include/iscsi-client/widgets.rb:822 msgid "False" msgstr "거짓" -#. check if not already connected -#. check if not already connected -#: src/include/iscsi-client/widgets.rb:755 -#: src/include/iscsi-client/widgets.rb:875 -msgid "" -"The target with this TargetName is already connected. Make sure that " -"multipathing is enabled to prevent data corruption." -msgstr "" -"이 TargetName을 가진 대상이 이미 연결되었습니다. 데이터 손상을 방지할 수 있도" -"록 다중 경로 지정이 활성화되어야 합니다." +#. check if not already connected +#. check if not already connected +#: src/include/iscsi-client/widgets.rb:755 +#: src/include/iscsi-client/widgets.rb:875 +msgid "The target with this TargetName is already connected. Make sure that multipathing is enabled to prevent data corruption." +msgstr "이 TargetName을 가진 대상이 이미 연결되었습니다. 데이터 손상을 방지할 수 있도록 다중 경로 지정이 활성화되어야 합니다." -#: src/include/iscsi-client/widgets.rb:758 -#: src/include/iscsi-client/widgets.rb:878 +#: src/include/iscsi-client/widgets.rb:758 +#: src/include/iscsi-client/widgets.rb:878 msgid "Continue" msgstr "계속(&O)" -#: src/include/iscsi-client/widgets.rb:759 -#: src/include/iscsi-client/widgets.rb:879 +#: src/include/iscsi-client/widgets.rb:759 +#: src/include/iscsi-client/widgets.rb:879 msgid "Cancel" msgstr "취소" -#. check if is not already connected -#: src/include/iscsi-client/widgets.rb:869 +#. check if is not already connected +#: src/include/iscsi-client/widgets.rb:869 msgid "The target is already connected." msgstr "대상이 이미 연결되었습니다." -#. Initialization dialog caption -#: src/include/iscsi-client/wizards.rb:121 +#. Initialization dialog caption +#: src/include/iscsi-client/wizards.rb:121 msgid "iSCSI Initiator Configuration" msgstr "iSCSI 이니시에이터 구성" -#. Initialization dialog contents -#: src/include/iscsi-client/wizards.rb:123 +#. Initialization dialog contents +#: src/include/iscsi-client/wizards.rb:123 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. don't check interactively for packages (bnc#367300) -#. skip it during second stage or when create AY profile -#: src/modules/IscsiClient.rb:96 -msgid "" -"<p>To configure the iSCSI initiator, the <b>%1</b> package must be installed." -"</p>" -msgstr "" -"<p>iSCSI 이니시에이터를 구성하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" +#. don't check interactively for packages (bnc#367300) +#. skip it during second stage or when create AY profile +#: src/modules/IscsiClient.rb:96 +msgid "<p>To configure the iSCSI initiator, the <b>%1</b> package must be installed.</p>" +msgstr "<p>iSCSI 이니시에이터를 구성하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" -#: src/modules/IscsiClient.rb:99 +#: src/modules/IscsiClient.rb:99 msgid "<p>Install it now?</p>" msgstr "<p>지금 설치하시겠습니까?</p>" -#. IscsiClient read dialog caption -#: src/modules/IscsiClient.rb:152 +#. IscsiClient read dialog caption +#: src/modules/IscsiClient.rb:152 msgid "Initializing iSCSI Initiator Configuration" msgstr "iSCSI 이니시에이터 구성 초기화" -#. Progress stage 1/3 -#: src/modules/IscsiClient.rb:168 +#. Progress stage 1/3 +#: src/modules/IscsiClient.rb:168 msgid "Read the database" msgstr "데이타베이스 읽기" -#. Progress stage 2/3 -#: src/modules/IscsiClient.rb:170 +#. Progress stage 2/3 +#: src/modules/IscsiClient.rb:170 msgid "Read the previous settings" msgstr "이전의 설정 읽기" -#. Progress stage 3/3 -#: src/modules/IscsiClient.rb:172 +#. Progress stage 3/3 +#: src/modules/IscsiClient.rb:172 msgid "Detect the devices" msgstr "장치 검색" -#. Progress step 1/3 -#: src/modules/IscsiClient.rb:176 +#. Progress step 1/3 +#: src/modules/IscsiClient.rb:176 msgid "Reading the database..." msgstr "데이타 베이스를 읽고 있습니다..." -#. Progress step 2/3 -#: src/modules/IscsiClient.rb:178 +#. Progress step 2/3 +#: src/modules/IscsiClient.rb:178 msgid "Reading the previous settings..." msgstr "이전 설정값을 읽고 있습니다..." -#. Progress step 3/3 -#: src/modules/IscsiClient.rb:180 +#. Progress step 3/3 +#: src/modules/IscsiClient.rb:180 msgid "Detecting the devices..." msgstr "장치를 검색하고 중..." -#. Progress finished -#: src/modules/IscsiClient.rb:182 +#. Progress finished +#: src/modules/IscsiClient.rb:182 msgid "Finished" msgstr "완료됨" -#. IscsiClient read dialog caption -#: src/modules/IscsiClient.rb:237 +#. IscsiClient read dialog caption +#: src/modules/IscsiClient.rb:237 msgid "Saving iSCSI Initiator Configuration" msgstr "iSCSI 이니시에이터 구성 저장" -#. Progress stage 1/2 -#: src/modules/IscsiClient.rb:246 +#. Progress stage 1/2 +#: src/modules/IscsiClient.rb:246 msgid "Write AutoYaST settings" msgstr "AutoYaST 설정 쓰기" -#. Progress stage 2/2 -#: src/modules/IscsiClient.rb:248 +#. Progress stage 2/2 +#: src/modules/IscsiClient.rb:248 msgid "Set up service status" msgstr "서비스 상태 설정" -#. interface type for hardware offloading -#: src/modules/IscsiClientLib.rb:72 +#. interface type for hardware offloading +#: src/modules/IscsiClientLib.rb:72 msgid "default (Software)" msgstr "기본값(소프트웨어)" -#: src/modules/IscsiClientLib.rb:73 +#: src/modules/IscsiClientLib.rb:73 msgid "all" msgstr "모두" -#. } -#: src/modules/IscsiClientLib.rb:730 +#. } +#: src/modules/IscsiClientLib.rb:730 msgid "" "InitiatorName from iBFT and from <tt>/etc/iscsi/initiatorname.iscsi</tt>\n" "differ. The old initiator name will be replaced by the value of iBFT and a \n" @@ -746,13 +673,13 @@ "백업이 생성됩니다. 다른 이니시에이터 이름을 사용하려는 경우 BIOS에서 \n" "변경하십시오.\n" -#. Report a warning (not an error) if login failed for other reasons -#. (also related to bsc#981693, warning popups usually are skipped) -#: src/modules/IscsiClientLib.rb:1070 +#. Report a warning (not an error) if login failed for other reasons +#. (also related to bsc#981693, warning popups usually are skipped) +#: src/modules/IscsiClientLib.rb:1070 msgid "Target connection failed.\n" msgstr "대상을 연결할 수 없습니다.\n" -#. do discovery first -#: src/modules/IscsiClientLib.rb:1208 +#. do discovery first +#: src/modules/IscsiClientLib.rb:1208 msgid "Configuration summary..." msgstr "구성 요약..." Modified: branches/SLE12-SP3/yast/ko/po/iscsi-lio-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/iscsi-lio-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/iscsi-lio-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,253 +14,243 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the iscsi-lio-server module -#: src/clients/iscsi-lio-server.rb:56 +#. Command line help text for the iscsi-lio-server module +#: src/clients/iscsi-lio-server.rb:56 msgid "Configuration of an iSCSI target via LIO" msgstr "LIO를 통해 iSCSI 대상 구성" -#. Rich text title for IscsiLioServer in proposals -#: src/clients/iscsi-lio-server_proposal.rb:85 +#. Rich text title for IscsiLioServer in proposals +#: src/clients/iscsi-lio-server_proposal.rb:85 msgid "iSCSI LIO Target" msgstr "iSCSI LIO 대상" -#. Menu title for IscsiLioServer in proposals -#: src/clients/iscsi-lio-server_proposal.rb:89 +#. Menu title for IscsiLioServer in proposals +#: src/clients/iscsi-lio-server_proposal.rb:89 msgid "&iSCSI LIO Target" msgstr "iSCSI LIO 대상(&I)" -#. first tab - service status and firewall -#: src/include/iscsi-lio-server/dialogs.rb:57 +#. first tab - service status and firewall +#: src/include/iscsi-lio-server/dialogs.rb:57 msgid "Service" msgstr "서비스" -#. second tab - global authentication -#: src/include/iscsi-lio-server/dialogs.rb:73 -#: src/modules/IscsiLioServer.rb:427 +#. second tab - global authentication +#: src/include/iscsi-lio-server/dialogs.rb:73 +#: src/modules/IscsiLioServer.rb:427 msgid "Global" msgstr "전역" -#. third tab - targets / luns -#. targets dialog -#: src/include/iscsi-lio-server/dialogs.rb:89 -#: src/include/iscsi-lio-server/dialogs.rb:321 -#: src/modules/IscsiLioServer.rb:443 +#. third tab - targets / luns +#. targets dialog +#: src/include/iscsi-lio-server/dialogs.rb:89 +#: src/include/iscsi-lio-server/dialogs.rb:321 +#: src/modules/IscsiLioServer.rb:443 msgid "Targets" msgstr "대상" -#: src/include/iscsi-lio-server/dialogs.rb:115 -#: src/include/iscsi-lio-server/dialogs.rb:176 +#: src/include/iscsi-lio-server/dialogs.rb:115 +#: src/include/iscsi-lio-server/dialogs.rb:176 msgid "Target" msgstr "대상" -#: src/include/iscsi-lio-server/dialogs.rb:124 -#: src/include/iscsi-lio-server/dialogs.rb:185 +#: src/include/iscsi-lio-server/dialogs.rb:124 +#: src/include/iscsi-lio-server/dialogs.rb:185 msgid "Identifier" msgstr "식별자" -#: src/include/iscsi-lio-server/dialogs.rb:128 -#: src/include/iscsi-lio-server/dialogs.rb:189 -#: src/include/iscsi-lio-server/dialogs.rb:321 +#: src/include/iscsi-lio-server/dialogs.rb:128 +#: src/include/iscsi-lio-server/dialogs.rb:189 +#: src/include/iscsi-lio-server/dialogs.rb:321 msgid "Portal group" msgstr "포털 그룹" -#: src/include/iscsi-lio-server/dialogs.rb:136 +#: src/include/iscsi-lio-server/dialogs.rb:136 msgid "Ip address" msgstr "IP 주소" -#: src/include/iscsi-lio-server/dialogs.rb:140 +#: src/include/iscsi-lio-server/dialogs.rb:140 msgid "Port number" msgstr "포트 번호" -#: src/include/iscsi-lio-server/dialogs.rb:143 +#: src/include/iscsi-lio-server/dialogs.rb:143 msgid "Bind all IP addresses" msgstr "모든 IP 주소 바인드" -#: src/include/iscsi-lio-server/dialogs.rb:145 +#: src/include/iscsi-lio-server/dialogs.rb:145 msgid "Use Login Authentication" msgstr "로그인 인증 사용" -#: src/include/iscsi-lio-server/dialogs.rb:149 -#: src/include/iscsi-lio-server/widgets.rb:327 +#: src/include/iscsi-lio-server/dialogs.rb:149 +#: src/include/iscsi-lio-server/widgets.rb:327 msgid "LUN" msgstr "LUN" -#: src/include/iscsi-lio-server/dialogs.rb:149 +#: src/include/iscsi-lio-server/dialogs.rb:149 msgid "Name" msgstr "이름" -#: src/include/iscsi-lio-server/dialogs.rb:149 +#: src/include/iscsi-lio-server/dialogs.rb:149 msgid "Path" msgstr "경로" -#: src/include/iscsi-lio-server/dialogs.rb:154 -#: src/include/iscsi-lio-server/dialogs.rb:199 -#: src/include/iscsi-lio-server/dialogs.rb:238 -#: src/include/iscsi-lio-server/dialogs.rb:326 -#: src/include/iscsi-lio-server/dialogs.rb:373 -#: src/include/iscsi-lio-server/widgets.rb:468 +#: src/include/iscsi-lio-server/dialogs.rb:154 +#: src/include/iscsi-lio-server/dialogs.rb:199 +#: src/include/iscsi-lio-server/dialogs.rb:238 +#: src/include/iscsi-lio-server/dialogs.rb:326 +#: src/include/iscsi-lio-server/dialogs.rb:373 +#: src/include/iscsi-lio-server/widgets.rb:468 msgid "Add" msgstr "추가" -#: src/include/iscsi-lio-server/dialogs.rb:155 -#: src/include/iscsi-lio-server/dialogs.rb:239 -#: src/include/iscsi-lio-server/dialogs.rb:327 -#: src/include/iscsi-lio-server/dialogs.rb:374 +#: src/include/iscsi-lio-server/dialogs.rb:155 +#: src/include/iscsi-lio-server/dialogs.rb:239 +#: src/include/iscsi-lio-server/dialogs.rb:327 +#: src/include/iscsi-lio-server/dialogs.rb:374 msgid "Edit" msgstr "편집" -#: src/include/iscsi-lio-server/dialogs.rb:156 -#: src/include/iscsi-lio-server/dialogs.rb:202 -#: src/include/iscsi-lio-server/dialogs.rb:240 -#: src/include/iscsi-lio-server/dialogs.rb:328 -#: src/include/iscsi-lio-server/dialogs.rb:375 -#: src/include/iscsi-lio-server/widgets.rb:469 +#: src/include/iscsi-lio-server/dialogs.rb:156 +#: src/include/iscsi-lio-server/dialogs.rb:202 +#: src/include/iscsi-lio-server/dialogs.rb:240 +#: src/include/iscsi-lio-server/dialogs.rb:328 +#: src/include/iscsi-lio-server/dialogs.rb:375 +#: src/include/iscsi-lio-server/widgets.rb:469 msgid "Delete" msgstr "삭제" -#. table header (Initiator: iSCSI client, LUN Mapping: logical unit client/target mapping, Auth: authorization) -#: src/include/iscsi-lio-server/dialogs.rb:194 +#. table header (Initiator: iSCSI client, LUN Mapping: logical unit client/target mapping, Auth: authorization) +#: src/include/iscsi-lio-server/dialogs.rb:194 msgid "Initiator" msgstr "이니시에이터" -#: src/include/iscsi-lio-server/dialogs.rb:194 +#: src/include/iscsi-lio-server/dialogs.rb:194 msgid "LUN Mapping" msgstr "LUN 매핑" -#: src/include/iscsi-lio-server/dialogs.rb:194 +#: src/include/iscsi-lio-server/dialogs.rb:194 msgid "Auth" msgstr "인증" -#: src/include/iscsi-lio-server/dialogs.rb:200 +#: src/include/iscsi-lio-server/dialogs.rb:200 msgid "Edit LUN" msgstr "LUN 편집" -#: src/include/iscsi-lio-server/dialogs.rb:201 +#: src/include/iscsi-lio-server/dialogs.rb:201 msgid "Edit Auth" msgstr "인증 편집" -#: src/include/iscsi-lio-server/dialogs.rb:203 +#: src/include/iscsi-lio-server/dialogs.rb:203 msgid "Copy" msgstr "복사" -#: src/include/iscsi-lio-server/dialogs.rb:217 -#: src/modules/IscsiLioServer.rb:434 +#: src/include/iscsi-lio-server/dialogs.rb:217 +#: src/modules/IscsiLioServer.rb:434 msgid "No Authentication" msgstr "인증 없음" -#: src/include/iscsi-lio-server/dialogs.rb:226 -#: src/modules/IscsiLioServer.rb:437 +#: src/include/iscsi-lio-server/dialogs.rb:226 +#: src/modules/IscsiLioServer.rb:437 msgid "Incoming Authentication" msgstr "수신 인증" -#. dialog to add/modify user and password -#: src/include/iscsi-lio-server/dialogs.rb:233 -#: src/include/iscsi-lio-server/dialogs.rb:254 -#: src/include/iscsi-lio-server/widgets.rb:747 +#. dialog to add/modify user and password +#: src/include/iscsi-lio-server/dialogs.rb:233 +#: src/include/iscsi-lio-server/dialogs.rb:254 +#: src/include/iscsi-lio-server/widgets.rb:747 msgid "Username" msgstr "사용자 이름" -#: src/include/iscsi-lio-server/dialogs.rb:233 -#: src/include/iscsi-lio-server/dialogs.rb:255 -#: src/include/iscsi-lio-server/widgets.rb:250 -#: src/include/iscsi-lio-server/widgets.rb:263 -#: src/include/iscsi-lio-server/widgets.rb:748 +#: src/include/iscsi-lio-server/dialogs.rb:233 +#: src/include/iscsi-lio-server/dialogs.rb:255 +#: src/include/iscsi-lio-server/widgets.rb:250 +#: src/include/iscsi-lio-server/widgets.rb:263 +#: src/include/iscsi-lio-server/widgets.rb:748 msgid "Password" msgstr "비밀번호" -#: src/include/iscsi-lio-server/dialogs.rb:249 -#: src/modules/IscsiLioServer.rb:440 +#: src/include/iscsi-lio-server/dialogs.rb:249 +#: src/modules/IscsiLioServer.rb:440 msgid "Outgoing Authentication" msgstr "발신 인증" -#. radio button (starting LIO target service - option 1) -#: src/include/iscsi-lio-server/dialogs.rb:275 +#. radio button (starting LIO target service - option 1) +#: src/include/iscsi-lio-server/dialogs.rb:275 msgid "When &Booting" msgstr "부팅 시(&B)" -#. radio button (starting LIO target service - option 2) -#: src/include/iscsi-lio-server/dialogs.rb:279 +#. radio button (starting LIO target service - option 2) +#: src/include/iscsi-lio-server/dialogs.rb:279 msgid "&Manually" msgstr "수동으로(&M)" -#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&") -#: src/include/iscsi-lio-server/dialogs.rb:285 -#: src/modules/IscsiLioServer.rb:429 +#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&") +#: src/include/iscsi-lio-server/dialogs.rb:285 +#: src/modules/IscsiLioServer.rb:429 msgid "When Booting" msgstr "부팅 시" -#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&") -#: src/include/iscsi-lio-server/dialogs.rb:287 -#: src/modules/IscsiLioServer.rb:431 +#. part of help text, used to describe radiobuttons (matching starting LIO target service but without "&") +#: src/include/iscsi-lio-server/dialogs.rb:287 +#: src/modules/IscsiLioServer.rb:431 msgid "Manually" msgstr "수동으로" -#: src/include/iscsi-lio-server/dialogs.rb:321 +#: src/include/iscsi-lio-server/dialogs.rb:321 msgid "TPG Status" msgstr "TPG 상태" -#. dialog for expert settings -#: src/include/iscsi-lio-server/dialogs.rb:370 +#. dialog for expert settings +#: src/include/iscsi-lio-server/dialogs.rb:370 msgid "Key" msgstr "키" -#: src/include/iscsi-lio-server/dialogs.rb:370 +#: src/include/iscsi-lio-server/dialogs.rb:370 msgid "Value" msgstr "값" -#. Summary dialog -#. @return dialog result -#. Main dialog - tabbed -#: src/include/iscsi-lio-server/dialogs.rb:431 +#. Summary dialog +#. @return dialog result +#. Main dialog - tabbed +#: src/include/iscsi-lio-server/dialogs.rb:431 msgid "iSCSI LIO Target Overview" msgstr "iSCSI LIO 대상 개요" -#. expert dialog -#. LUN details -#: src/include/iscsi-lio-server/dialogs.rb:439 -#: src/include/iscsi-lio-server/helps.rb:185 -#: src/include/iscsi-lio-server/helps.rb:190 +#. expert dialog +#. LUN details +#: src/include/iscsi-lio-server/dialogs.rb:439 +#: src/include/iscsi-lio-server/helps.rb:185 +#: src/include/iscsi-lio-server/helps.rb:190 msgid "<h1>iSCSI Target</h1>" msgstr "<h1>iSCSI 대상</h1>" -#. dialog for add target -#: src/include/iscsi-lio-server/dialogs.rb:474 +#. dialog for add target +#: src/include/iscsi-lio-server/dialogs.rb:474 msgid "Add iSCSI Target" msgstr "iSCSI 대상 추가" -#. dialog for modifying initiator setup for a target -#. (includes authentication) -#: src/include/iscsi-lio-server/dialogs.rb:509 +#. dialog for modifying initiator setup for a target +#. (includes authentication) +#: src/include/iscsi-lio-server/dialogs.rb:509 msgid "Modify initiators ACLs" msgstr "이니시에이터 ACL 수정" -#. edit target dialog -#: src/include/iscsi-lio-server/dialogs.rb:543 +#. edit target dialog +#: src/include/iscsi-lio-server/dialogs.rb:543 msgid "Modify iSCSI Target Lun Setup" msgstr "iSCSI 대상 LUN 설정 수정" -#. expert target dialog -#: src/include/iscsi-lio-server/dialogs.rb:576 +#. expert target dialog +#: src/include/iscsi-lio-server/dialogs.rb:576 msgid "iSCSI Target Expert Settings" msgstr "iSCSI 대상 고급 설정" -#. All helps are here -#: src/include/iscsi-lio-server/helps.rb:36 -msgid "" -"If you enable <b>Use Login Authentication</b>, you need to fill in " -"<b>UserID</b> and <b>Password</b> for both <b>Authentication " -"for Targets</b> and <b>Authentication for Initiators</b> in " -"next pages. Even you disabled <b>Use Login Authentication</b>, it's still " -"needed to add the initiators name of which you want to grant " -"access to the targets in next page" -msgstr "" -"<b>로그인 인증 사용</b>을 활성화할 경우 다음 페이지에서 <b>대상 인증</b> 및 " -"<b>이니시에이터 인증</b> 모두에 대해 <b>사용자 ID</b>와 <b>비밀번호</b>를 입" -"력해야 합니다. <b>로그인 인증 사용</b>을 비활성화해도 다음 페이지에서 대상에 " -"대한 액세스 권한을 부여할 이니시에이터 이름을 추가해야 합니다." +#. All helps are here +#: src/include/iscsi-lio-server/helps.rb:36 +msgid "If you enable <b>Use Login Authentication</b>, you need to fill in <b>UserID</b> and <b>Password</b> for both <b>Authentication for Targets</b> and <b>Authentication for Initiators</b> in next pages. Even you disabled <b>Use Login Authentication</b>, it's still needed to add the initiators name of which you want to grant access to the targets in next page" +msgstr "<b>로그인 인증 사용</b>을 활성화할 경우 다음 페이지에서 <b>대상 인증</b> 및 <b>이니시에이터 인증</b> 모두에 대해 <b>사용자 ID</b>와 <b>비밀번호</b>를 입력해야 합니다. <b>로그인 인증 사용</b>을 비활성화해도 다음 페이지에서 대상에 대한 액세스 권한을 부여할 이니시에이터 이름을 추가해야 합니다." -#. Read dialog help 1/2 -#: src/include/iscsi-lio-server/helps.rb:42 +#. Read dialog help 1/2 +#: src/include/iscsi-lio-server/helps.rb:42 msgid "" "<p><b><big>Initializing iSCSI LIO Target Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -268,8 +258,8 @@ "<p><b><big>iSCSI LIO 대상 구성 초기화 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/iscsi-lio-server/helps.rb:46 +#. Read dialog help 2/2 +#: src/include/iscsi-lio-server/helps.rb:46 msgid "" "<p><b><big>Aborting Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -277,8 +267,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/iscsi-lio-server/helps.rb:51 +#. Write dialog help 1/2 +#: src/include/iscsi-lio-server/helps.rb:51 msgid "" "<p><b><big>Saving iSCSI Target Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -286,8 +276,8 @@ "<p><b><big>iSCSI 대상 구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/iscsi-lio-server/helps.rb:55 +#. Write dialog help 2/2 +#: src/include/iscsi-lio-server/helps.rb:55 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -299,7 +289,7 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#: src/include/iscsi-lio-server/helps.rb:61 +#: src/include/iscsi-lio-server/helps.rb:61 msgid "" "<p><b>Save</b> button will export some information about\n" "targets into selected file.</p>" @@ -307,8 +297,8 @@ "<p><b>저장</b> 버튼은 대상에 대한 일부 정보를\n" "선택한 파일로 엑스포트합니다.</p>" -#. Summary dialog help 1/3 -#: src/include/iscsi-lio-server/helps.rb:65 +#. Summary dialog help 1/3 +#: src/include/iscsi-lio-server/helps.rb:65 msgid "" "<p><b><big>iSCSI Target Configuration</big></b><br>\n" "Configure an iSCSI target here.<br></p>\n" @@ -316,8 +306,8 @@ "<p><b><big>iSCSI 대상 구성</big></b><br>\n" "여기에서 iSCSI 대상을 구성합니다.<br></p>\n" -#. Summary dialog help 2/3 -#: src/include/iscsi-lio-server/helps.rb:69 +#. Summary dialog help 2/3 +#: src/include/iscsi-lio-server/helps.rb:69 msgid "" "<p><b><big>Adding an iSCSI Target</big></b><br>\n" "Choose an iSCSI target from the list of detected iSCSI targets.\n" @@ -329,8 +319,8 @@ "해당 대상이 검색되지 않았으면 <b>기타(검색되지 않음)</b>를 사용합니다.\n" "그런 다음 <b>구성</b>을 누릅니다.</p>\n" -#. Summary dialog help 3/3 -#: src/include/iscsi-lio-server/helps.rb:76 +#. Summary dialog help 3/3 +#: src/include/iscsi-lio-server/helps.rb:76 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -340,8 +330,8 @@ "<b>편집</b>을 누르면 구성을 변경할 수 있는 추가 대화 상자가\n" "열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/iscsi-lio-server/helps.rb:82 +#. Ovreview dialog help 1/3 +#: src/include/iscsi-lio-server/helps.rb:82 msgid "" "<p><b><big>iSCSI Target Configuration Overview</big></b><br>\n" "Obtain an overview of installed iSCSI targets. Additionally\n" @@ -351,8 +341,8 @@ "설치된 iSCSI 대상의 개요를 볼 수 있습니다. 또한\n" "구성을 편집할 수도 있습니다.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/iscsi-lio-server/helps.rb:88 +#. Ovreview dialog help 2/3 +#: src/include/iscsi-lio-server/helps.rb:88 msgid "" "<p><b><big>Adding an iSCSI Target</big></b><br>\n" "Press <b>Add</b> to configure an iSCSI target.</p>" @@ -360,8 +350,8 @@ "<p><b><big>iSCSI 대상 추가</big></b><br>\n" "iSCSI 대상을 구성하려면 <b>추가</b>를 누릅니다.</p>" -#. Ovreview dialog help 3/3 -#: src/include/iscsi-lio-server/helps.rb:93 +#. Ovreview dialog help 3/3 +#: src/include/iscsi-lio-server/helps.rb:93 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "Choose an iSCSI target to change or remove.\n" @@ -371,8 +361,8 @@ "변경 또는 제거할 iSCSI 대상을 선택합니다.\n" "그런 다음 <b>편집</b> 또는 <b>삭제</b>를 누릅니다.</p>\n" -#. Configure1 dialog help 1/2 -#: src/include/iscsi-lio-server/helps.rb:99 +#. Configure1 dialog help 1/2 +#: src/include/iscsi-lio-server/helps.rb:99 msgid "" "<p><b><big>Configuration Part One</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -382,10 +372,10 @@ "<b>다음</b>을 눌러 계속합니다.\n" "<br></p>" -#. Configure1 dialog help 2/2 -#. Configure2 dialog help 2/2 -#: src/include/iscsi-lio-server/helps.rb:105 -#: src/include/iscsi-lio-server/helps.rb:117 +#. Configure1 dialog help 2/2 +#. Configure2 dialog help 2/2 +#: src/include/iscsi-lio-server/helps.rb:105 +#: src/include/iscsi-lio-server/helps.rb:117 msgid "" "<p><b><big>Selecting Something</big></b><br>\n" "It is not possible. You must code it first. :-)\n" @@ -395,8 +385,8 @@ "이 옵션은 선택할 수 없습니다. 먼저 코딩을 해야 합니다.\n" " </p>" -#. Configure2 dialog help 1/2 -#: src/include/iscsi-lio-server/helps.rb:111 +#. Configure2 dialog help 1/2 +#: src/include/iscsi-lio-server/helps.rb:111 msgid "" "<p><b><big>Configuration Part Two</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -406,91 +396,55 @@ "<b>다음</b>을 눌러 계속합니다.\n" "<br></p>\n" -#. discovery authentication -#: src/include/iscsi-lio-server/helps.rb:123 -msgid "" -"This tab intends to configure authentication for discovery session. Use " -"<b>No Discovery Authentication</b> to disable discovery authentication. Or " -"you need to fill both <b>Authentication by Targets</b> and <b>Authentication " -"by Initiators</b>. <b>Note: UserID / Password can not be the same for " -"initiators and targets!</b>" -msgstr "" -"이 탭은 검색 세션을 위한 인증을 구성하기 위한 것입니다. 검색 인증을 비활성화" -"하려면 <b>검색 인증 없음</b>을 사용하십시오. 또는 <b>대상에 의한 인증</b>과 " -"<b>이니시에이터에 의한 인증</b>을 모두 입력해야 합니다. <b>참고: 이니시에이터" -"와 대상의 사용자 ID/비밀번호가 같을 수 없습니다.</b>" +#. discovery authentication +#: src/include/iscsi-lio-server/helps.rb:123 +msgid "This tab intends to configure authentication for discovery session. Use <b>No Discovery Authentication</b> to disable discovery authentication. Or you need to fill both <b>Authentication by Targets</b> and <b>Authentication by Initiators</b>. <b>Note: UserID / Password can not be the same for initiators and targets!</b>" +msgstr "이 탭은 검색 세션을 위한 인증을 구성하기 위한 것입니다. 검색 인증을 비활성화하려면 <b>검색 인증 없음</b>을 사용하십시오. 또는 <b>대상에 의한 인증</b>과 <b>이니시에이터에 의한 인증</b>을 모두 입력해야 합니다. <b>참고: 이니시에이터와 대상의 사용자 ID/비밀번호가 같을 수 없습니다.</b>" -#. target client setup. -#: src/include/iscsi-lio-server/helps.rb:130 +#. target client setup. +#: src/include/iscsi-lio-server/helps.rb:130 msgid "" -"<p>Use <b>Add</b> to give an initiator (iSCSI client) access to a LUN " -"imported from\n" -" target portal group. Specify which initiator is allowed to connect (use " -"<i>InitiatorName</i>\n" -" from '/etc/iscsi/initiatorname.iscsi' on iSCSI initiator). <b>Delete</b> " -"will remove the initiator access to the LUN.</p>" +"<p>Use <b>Add</b> to give an initiator (iSCSI client) access to a LUN imported from\n" +" target portal group. Specify which initiator is allowed to connect (use <i>InitiatorName</i>\n" +" from '/etc/iscsi/initiatorname.iscsi' on iSCSI initiator). <b>Delete</b> will remove the initiator access to the LUN.</p>" msgstr "" -"<p><b>추가</b>를 사용하여 이니시에이터(iSCSI 클라이언트)에게 대상 포털 그룹에" -"서\n" +"<p><b>추가</b>를 사용하여 이니시에이터(iSCSI 클라이언트)에게 대상 포털 그룹에서\n" "임포트된 LUN에 대한 액세스 권한을 제공하십시오. 연결할 수 있는\n" -"이니시에이터를 지정하십시오(iSCSI 이니시에이터에 있는 '/etc/iscsi/" -"initiatorname.iscsi'의 <i>InitiatorName</i> 사용). <b>삭제</b>는 LUN에 대한 " -"이니시에이터의 액세스 권한을 제거합니다.</p>" +"이니시에이터를 지정하십시오(iSCSI 이니시에이터에 있는 '/etc/iscsi/initiatorname.iscsi'의 <i>InitiatorName</i> 사용). <b>삭제</b>는 LUN에 대한 이니시에이터의 액세스 권한을 제거합니다.</p>" -#: src/include/iscsi-lio-server/helps.rb:136 +#: src/include/iscsi-lio-server/helps.rb:136 msgid "" -"<p>With <b>Edit LUN</b> one can modify the LUN mapping. Please note that LUN " -"target number must be unique.<br>After pressing <b>Edit Auth</b>, it's " -"needed to Use <b>Authentication by Targets</b> and <b>Authentication by " -"Initiators</b> together. Then insert <b>UserID </b> and <b>Password</b>. " -"Please make sure they are different usernames and passwords for the two " -"kinds of authentication.\n" -" If <b>Use Login Authentication</b> is disabled in previous dialog, <b>Edit " -"Auth</b> is disabled here.</p>" +"<p>With <b>Edit LUN</b> one can modify the LUN mapping. Please note that LUN target number must be unique.<br>After pressing <b>Edit Auth</b>, it's needed to Use <b>Authentication by Targets</b> and <b>Authentication by Initiators</b> together. Then insert <b>UserID </b> and <b>Password</b>. Please make sure they are different usernames and passwords for the two kinds of authentication.\n" +" If <b>Use Login Authentication</b> is disabled in previous dialog, <b>Edit Auth</b> is disabled here.</p>" msgstr "" -"<p><b>LUN 편집</b>을 사용하면 LUN 매핑을 수정할 수 있습니다. LUN 대상 번호는 " -"고유해야 합니다.<br><b>인증 편집</b>을 누른 후 <b>대상에 의한 인증</b> 및 <b>" -"이니시에이터에 의한 인증</b>을 모두 사용해야 합니다. 그런 다음 <b>사용자 ID 및 <b>비밀번호</b>를 삽입하십시오. 두 가지 인증에 대한 사용자 이름과 비밀" -"번호가 서로 다른지 확인하십시오.\n" -" 이전 대화 상자에서 <b>로그인 인증 사용</b>이 비활성화된 경우 여기서 <b>인증 " -"편집</b>이 비활성화됩니다.</p>" +"<p><b>LUN 편집</b>을 사용하면 LUN 매핑을 수정할 수 있습니다. LUN 대상 번호는 고유해야 합니다.<br><b>인증 편집</b>을 누른 후 <b>대상에 의한 인증</b> 및 <b>이니시에이터에 의한 인증</b>을 모두 사용해야 합니다. 그런 다음 <b>사용자 ID</b> 및 <b>비밀번호</b>를 삽입하십시오. 두 가지 인증에 대한 사용자 이름과 비밀번호가 서로 다른지 확인하십시오.\n" +" 이전 대화 상자에서 <b>로그인 인증 사용</b>이 비활성화된 경우 여기서 <b>인증 편집</b>이 비활성화됩니다.</p>" -#: src/include/iscsi-lio-server/helps.rb:143 -msgid "" -"<p><b>Copy</b> offers the possibility to give an additional initiator access " -"to the LUN.</p>" -msgstr "" -"<p><b>복사</b>는 추가 이니시에이터에 LUN 액세스 권한을 부여하는 기능을 제공합" -"니다.</p>" +#: src/include/iscsi-lio-server/helps.rb:143 +msgid "<p><b>Copy</b> offers the possibility to give an additional initiator access to the LUN.</p>" +msgstr "<p><b>복사</b>는 추가 이니시에이터에 LUN 액세스 권한을 부여하는 기능을 제공합니다.</p>" -#. target dialog -#: src/include/iscsi-lio-server/helps.rb:145 +#. target dialog +#: src/include/iscsi-lio-server/helps.rb:145 msgid "" -"List of offered targets and target portal groups. Create a new target by " -"clicking <b>Add</b>.\n" -"To delete or modify an item, select it and press <b>Edit</b> or <b>Delete." +"List of offered targets and target portal groups. Create a new target by clicking <b>Add</b>.\n" +"To delete or modify an item, select it and press <b>Edit</b> or <b>Delete</b>." msgstr "" -"제공된 대상 및 대상 포털 그룹 목록입니다. <b>추가</b>를 클릭하여 새 대상을 생" -"성하십시오.\n" -"항목을 삭제 또는 수정하려면 해당 항목을 선택하고 <b>편집</b> 또는 <b>삭제</b>" -"를 누르십시오." +"제공된 대상 및 대상 포털 그룹 목록입니다. <b>추가</b>를 클릭하여 새 대상을 생성하십시오.\n" +"항목을 삭제 또는 수정하려면 해당 항목을 선택하고 <b>편집</b> 또는 <b>삭제</b>를 누르십시오." -#. edit target -#. add target -#: src/include/iscsi-lio-server/helps.rb:150 -#: src/include/iscsi-lio-server/helps.rb:166 +#. edit target +#. add target +#: src/include/iscsi-lio-server/helps.rb:150 +#: src/include/iscsi-lio-server/helps.rb:166 msgid "<h1>iSCSI Target IP/Port and LUN setup</h1>" msgstr "<h1>iSCSI 대상 IP/포트 및 LUN 설정</h1>" -#: src/include/iscsi-lio-server/helps.rb:153 +#: src/include/iscsi-lio-server/helps.rb:153 msgid "" -"It is possible to make arbitary block devices or files available under a " -"<b>LUN</b>.\n" +"It is possible to make arbitary block devices or files available under a <b>LUN</b>.\n" "You have to provide <b>path</b> to either block devices or file. \n" -"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN. \n" +"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN</b>. \n" "The name needs to be unique within the target portal group. If the user\n" "does not provide a name for LUN, it is generated automatically." msgstr "" @@ -500,11 +454,10 @@ "이름은 대상 포털 그룹 내에서 고유해야 합니다. 사용자가\n" "LUN 이름을 제공하지 않을 경우 자동으로 생성됩니다." -#: src/include/iscsi-lio-server/helps.rb:160 -#: src/include/iscsi-lio-server/helps.rb:179 +#: src/include/iscsi-lio-server/helps.rb:160 +#: src/include/iscsi-lio-server/helps.rb:179 msgid "" -"<p>Under <b>Ip Address</b> and <b>Port Number</b> you specify under which " -"address\n" +"<p>Under <b>Ip Address</b> and <b>Port Number</b> you specify under which address\n" "and port the service will be available. Default for port number is 3260.\n" "Only ip addresses assigned to one of the network cards are possible." msgstr "" @@ -512,231 +465,220 @@ "및 포트를 지정합니다. 포트 번호의 기본값은 3260입니다.\n" "네트워크 카드 중 하나에 할당된 IP 주소만 지정할 수 있습니다." -#: src/include/iscsi-lio-server/helps.rb:169 +#: src/include/iscsi-lio-server/helps.rb:169 msgid "Create a new target. Replace template values with the correct values." msgstr "새 대상을 만듭니다. 템플릿 값을 올바른 값으로 바꿉니다." -#: src/include/iscsi-lio-server/helps.rb:172 +#: src/include/iscsi-lio-server/helps.rb:172 msgid "" -"It is possible to make arbitary block devices or files available under a " -"lun.\n" +"It is possible to make arbitary block devices or files available under a lun.\n" "You have to provide <b>path</b> to either block devices or file. \n" -"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN. \n" +"The <b>LUN name</b> is an arbitrary name to uniquely identify the <b>LUN</b>. \n" "The name needs to be unique within the target portal group. If the user\n" "does not provide a name for LUN, it is generated automatically." msgstr "" "임의 블록 장치나 파일을 LUN에서 사용하도록 설정할 수 있습니다.\n" "블록 장치나 파일의 <b>경로</b>를 제공해야 합니다. \n" "<b>LUN 이름</b>은 <b>LUN</b>을 고유하게 식별하는 임의 이름입니다. \n" -"이름은 대상 포털 그룹 내에서 고유해야 합니다. 사용자가 LUN에 대한 이름을 제공" -"하지 않으면 자동으로 이름이 생성됩니다." +"이름은 대상 포털 그룹 내에서 고유해야 합니다. 사용자가 LUN에 대한 이름을 제공하지 않으면 자동으로 이름이 생성됩니다." -#: src/include/iscsi-lio-server/helps.rb:186 -msgid "" -"It is possible to <b>add</b>, <b>edit</b> or <b>delete</b> all additional " -"configuration options." -msgstr "" -"다른 모든 구성 옵션을 <b>추가</b>하거나 <b>편집</b> 또는 <b>삭제</b>할 수 있" -"습니다." +#: src/include/iscsi-lio-server/helps.rb:186 +msgid "It is possible to <b>add</b>, <b>edit</b> or <b>delete</b> all additional configuration options." +msgstr "다른 모든 구성 옵션을 <b>추가</b>하거나 <b>편집</b> 또는 <b>삭제</b>할 수 있습니다." -#: src/include/iscsi-lio-server/helps.rb:191 +#: src/include/iscsi-lio-server/helps.rb:191 msgid "" -"Edit <b>LUN</b> number if needed, set <b>Type</b> (nullio is for testing " -"purposes).\n" -"If Type=fileio set <b>Path</b> to disk device or file.<b>SCSI ID</b> and " -"<b>Sectors</b> are optional." +"Edit <b>LUN</b> number if needed, set <b>Type</b> (nullio is for testing purposes).\n" +"If Type=fileio set <b>Path</b> to disk device or file.<b>SCSI ID</b> and <b>Sectors</b> are optional." msgstr "" -"필요한 경우 <b>LUN</b> 번호를 편집하고 <b>유형</b>을 설정하십시오(테스트 목적" -"에는 nullio가 사용됨).\n" -"Type=fileio인 경우 디스크 장치나 파일의 <b>경로</b>를 설정하십시오. <b>SCSI " -"ID</b> 및 <b>섹터</b>는 선택 사항입니다." +"필요한 경우 <b>LUN</b> 번호를 편집하고 <b>유형</b>을 설정하십시오(테스트 목적에는 nullio가 사용됨).\n" +"Type=fileio인 경우 디스크 장치나 파일의 <b>경로</b>를 설정하십시오. <b>SCSI ID</b> 및 <b>섹터</b>는 선택 사항입니다." -#. save discovery authentication or authentication for given target -#: src/include/iscsi-lio-server/widgets.rb:156 +#. save discovery authentication or authentication for given target +#: src/include/iscsi-lio-server/widgets.rb:156 msgid "Problem changing authentication" msgstr "인증을 변경하는 중 문제 발생" -#. validate functions checks the secret for incoming and outgoing cannot be same -#: src/include/iscsi-lio-server/widgets.rb:172 -#: src/include/iscsi-lio-server/widgets.rb:182 +#. validate functions checks the secret for incoming and outgoing cannot be same +#: src/include/iscsi-lio-server/widgets.rb:172 +#: src/include/iscsi-lio-server/widgets.rb:182 msgid "Invalid Username" msgstr "잘못된 사용자 이름" -#: src/include/iscsi-lio-server/widgets.rb:172 -#: src/include/iscsi-lio-server/widgets.rb:182 +#: src/include/iscsi-lio-server/widgets.rb:172 +#: src/include/iscsi-lio-server/widgets.rb:182 msgid "Invalid Password." msgstr "비밀번호가 잘못되었습니다." -#. we must also call handleDiscAuthStatus() here because once users enable / disable discovery authentication, -#. we need to set the configFS attributes accordingly. -#: src/include/iscsi-lio-server/widgets.rb:233 +#. we must also call handleDiscAuthStatus() here because once users enable / disable discovery authentication, +#. we need to set the configFS attributes accordingly. +#: src/include/iscsi-lio-server/widgets.rb:233 msgid "No Discovery Authentication" msgstr "검색 인증 없음" -#: src/include/iscsi-lio-server/widgets.rb:244 +#: src/include/iscsi-lio-server/widgets.rb:244 msgid "Authentication by Targets" msgstr "대상에 의한 인증" -#: src/include/iscsi-lio-server/widgets.rb:249 -#: src/include/iscsi-lio-server/widgets.rb:262 +#: src/include/iscsi-lio-server/widgets.rb:249 +#: src/include/iscsi-lio-server/widgets.rb:262 msgid "UserID" msgstr "사용자 ID" -#: src/include/iscsi-lio-server/widgets.rb:257 +#: src/include/iscsi-lio-server/widgets.rb:257 msgid "Authentication by Initiators" msgstr "이니시에이터에 의한 인증" -#: src/include/iscsi-lio-server/widgets.rb:277 +#: src/include/iscsi-lio-server/widgets.rb:277 msgid "Selected LUN is already in use!" msgstr "선택한 LUN이 이미 사용 중입니다!" -#: src/include/iscsi-lio-server/widgets.rb:286 +#: src/include/iscsi-lio-server/widgets.rb:286 msgid "Selected Name is already in use!" msgstr "선택한 이름이 이미 사용 중입니다." -#: src/include/iscsi-lio-server/widgets.rb:295 +#: src/include/iscsi-lio-server/widgets.rb:295 msgid "Selected Path must be either block device or normal file!" msgstr "선택한 경로는 블록 장치 또는 일반 파일이어야 합니다." -#: src/include/iscsi-lio-server/widgets.rb:301 +#: src/include/iscsi-lio-server/widgets.rb:301 msgid "Selected Path is already in use!" msgstr "선택한 경로가 이미 사용 중입니다." -#: src/include/iscsi-lio-server/widgets.rb:336 +#: src/include/iscsi-lio-server/widgets.rb:336 msgid "Path:" msgstr "경로: " -#: src/include/iscsi-lio-server/widgets.rb:339 +#: src/include/iscsi-lio-server/widgets.rb:339 msgid "Browse" msgstr "찾아보기" -#: src/include/iscsi-lio-server/widgets.rb:359 +#: src/include/iscsi-lio-server/widgets.rb:359 msgid "Select file or device" msgstr "파일 또는 장치 선택" -#: src/include/iscsi-lio-server/widgets.rb:462 +#: src/include/iscsi-lio-server/widgets.rb:462 msgid "Initiator LUN" msgstr "이니시에이터 LUN" -#: src/include/iscsi-lio-server/widgets.rb:462 +#: src/include/iscsi-lio-server/widgets.rb:462 msgid "Target LUN" msgstr "대상 LUN" -#: src/include/iscsi-lio-server/widgets.rb:470 +#: src/include/iscsi-lio-server/widgets.rb:470 msgid "Change:" msgstr "변경:" -#: src/include/iscsi-lio-server/widgets.rb:563 +#: src/include/iscsi-lio-server/widgets.rb:563 msgid "Target LUN %1 used more than once!" msgstr "대상 LUN %1이(가) 두 번 이상 사용되었습니다." -#: src/include/iscsi-lio-server/widgets.rb:625 +#: src/include/iscsi-lio-server/widgets.rb:625 msgid "Need to enable at least one Authentification!" msgstr "하나 이상의 인증을 활성화해야 합니다." -#: src/include/iscsi-lio-server/widgets.rb:645 +#: src/include/iscsi-lio-server/widgets.rb:645 msgid "Initiator name:" msgstr "이니시에이터 이름:" -#: src/include/iscsi-lio-server/widgets.rb:648 +#: src/include/iscsi-lio-server/widgets.rb:648 msgid "Import LUNs from TPG" msgstr "TPG에서 LUN 임포트" -#: src/include/iscsi-lio-server/widgets.rb:664 -#: src/include/iscsi-lio-server/widgets.rb:721 +#: src/include/iscsi-lio-server/widgets.rb:664 +#: src/include/iscsi-lio-server/widgets.rb:721 msgid "Initiator name must not be empty!" msgstr "이니시에이터 이름은 비워둘 수 없습니다!" -#. Don't check IscsiLioData.GetClntList(@curr_target, @curr_tpg) for existing -#. initiator name. It's allowed to have several LUNs accessable for same initiator. -#. TODO: verify whether it's necessary to check @changed_lun here? -#: src/include/iscsi-lio-server/widgets.rb:670 -#: src/include/iscsi-lio-server/widgets.rb:727 +#. Don't check IscsiLioData.GetClntList(@curr_target, @curr_tpg) for existing +#. initiator name. It's allowed to have several LUNs accessable for same initiator. +#. TODO: verify whether it's necessary to check @changed_lun here? +#: src/include/iscsi-lio-server/widgets.rb:670 +#: src/include/iscsi-lio-server/widgets.rb:727 msgid "Initiator name already exists!" msgstr "이니시에이터 이름이 이미 존재합니다!" -#. Copy exisiting LUN, i.e. give additional initiator access to the LUN -#. (which is allowed, makes sense e.g. with multipath) -#: src/include/iscsi-lio-server/widgets.rb:704 +#. Copy exisiting LUN, i.e. give additional initiator access to the LUN +#. (which is allowed, makes sense e.g. with multipath) +#: src/include/iscsi-lio-server/widgets.rb:704 msgid "New initiator name:" msgstr "새 이니시에이터 이름:" -#: src/include/iscsi-lio-server/widgets.rb:750 +#: src/include/iscsi-lio-server/widgets.rb:750 msgid "OK" msgstr "확인" -#: src/include/iscsi-lio-server/widgets.rb:751 +#: src/include/iscsi-lio-server/widgets.rb:751 msgid "Cancel" msgstr "취소" -#. create items from targets -#: src/include/iscsi-lio-server/widgets.rb:811 +#. create items from targets +#: src/include/iscsi-lio-server/widgets.rb:811 msgid "Enabled" msgstr "활성화됨" -#: src/include/iscsi-lio-server/widgets.rb:811 -#: src/include/iscsi-lio-server/widgets.rb:1289 -#: src/include/iscsi-lio-server/widgets.rb:1392 -#: src/include/iscsi-lio-server/widgets.rb:1429 +#: src/include/iscsi-lio-server/widgets.rb:811 +#: src/include/iscsi-lio-server/widgets.rb:1289 +#: src/include/iscsi-lio-server/widgets.rb:1392 +#: src/include/iscsi-lio-server/widgets.rb:1429 msgid "Disabled" msgstr "비활성화" -#. remove a item -#. **************** Edit Dialog ***************************** -#. init values for modifying target (read it from stored map) -#: src/include/iscsi-lio-server/widgets.rb:848 -#: src/include/iscsi-lio-server/widgets.rb:962 -#: src/include/iscsi-lio-server/widgets.rb:1316 +#. remove a item +#. **************** Edit Dialog ***************************** +#. init values for modifying target (read it from stored map) +#: src/include/iscsi-lio-server/widgets.rb:848 +#: src/include/iscsi-lio-server/widgets.rb:962 +#: src/include/iscsi-lio-server/widgets.rb:1316 msgid "Really delete the selected item?" msgstr "선택한 항목을 삭제하시겠습니까?" -#: src/include/iscsi-lio-server/widgets.rb:1030 +#: src/include/iscsi-lio-server/widgets.rb:1030 msgid "Problem creating target %1 with tpg %2" msgstr "TPG %2(으)로 대상 %1을(를) 생성하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1052 +#: src/include/iscsi-lio-server/widgets.rb:1052 msgid "Problem setting network portal to %1" msgstr "네트워크 포털을 %1(으)로 설정하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1073 +#: src/include/iscsi-lio-server/widgets.rb:1073 msgid "Problem removing lun %1" msgstr "LUN %1을(를) 제거하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1098 +#: src/include/iscsi-lio-server/widgets.rb:1098 msgid "Problem setting lun %1 (name:%2) to path %3" msgstr "LUN %1(이름: %2)을(를) %3 경로로 설정하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1112 +#: src/include/iscsi-lio-server/widgets.rb:1112 msgid "Problem setting auth on %1:%2 to %3" msgstr "%1:%2의 인증을 %3(으)로 설정하는 중 문제 발생" -#. validate function checks if target/tpg are unique and not empty -#: src/include/iscsi-lio-server/widgets.rb:1226 +#. validate function checks if target/tpg are unique and not empty +#: src/include/iscsi-lio-server/widgets.rb:1226 msgid "The target cannot be empty." msgstr "대상은 비워둘 수 없습니다." -#: src/include/iscsi-lio-server/widgets.rb:1230 +#: src/include/iscsi-lio-server/widgets.rb:1230 msgid "The target portal group cannot be empty." msgstr "대상 포털 그룹은 비워둘 수 없습니다." -#: src/include/iscsi-lio-server/widgets.rb:1241 +#: src/include/iscsi-lio-server/widgets.rb:1241 msgid "The target already exists." msgstr "대상이 이미 존재합니다." -#: src/include/iscsi-lio-server/widgets.rb:1261 +#: src/include/iscsi-lio-server/widgets.rb:1261 msgid "Incoming" msgstr "수신" -#: src/include/iscsi-lio-server/widgets.rb:1264 +#: src/include/iscsi-lio-server/widgets.rb:1264 msgid "Outgoing" msgstr "발신" -#: src/include/iscsi-lio-server/widgets.rb:1266 +#: src/include/iscsi-lio-server/widgets.rb:1266 msgid "None" msgstr "없음" -#: src/include/iscsi-lio-server/widgets.rb:1478 +#: src/include/iscsi-lio-server/widgets.rb:1478 msgid "" "There isn't any initiator specified.\n" "To allow an initiator login to the target, please\n" @@ -750,98 +692,98 @@ "(이니시에이터의 /etc/iscsi/initiatorname.iscsi 참조).\n" "이니시에이터 액세스 없이 계속 진행하시겠습니까?" -#: src/include/iscsi-lio-server/widgets.rb:1492 +#: src/include/iscsi-lio-server/widgets.rb:1492 msgid "Problem removing LUN %4 for initiator %3 in %1:%2" msgstr "%1:%2에서 이니시에이터 %3에 대한 LUN %4을(를) 제거하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1507 +#: src/include/iscsi-lio-server/widgets.rb:1507 msgid "Problem adding LUN %4:%5 for initiator %3 in %1:%2" msgstr "%1:%2에서 이니시에이터 %3에 대한 LUN %4:%5을(를) 추가하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1528 +#: src/include/iscsi-lio-server/widgets.rb:1528 msgid "Problem removing initiator %3 from %1:%2" msgstr "%1:%2에서 이니시에이터 %3을(를) 제거하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1552 +#: src/include/iscsi-lio-server/widgets.rb:1552 msgid "Problem creating initiator %3 for %1:%2" msgstr "%1:%2에 대한 이니시에이터 %3을(를) 생성하는 중 문제 발생" -#: src/include/iscsi-lio-server/widgets.rb:1587 +#: src/include/iscsi-lio-server/widgets.rb:1587 msgid "Problem changing auth for initiator %3 in %1:%2" msgstr "%1:%2에서 이니시에이터 %3에 대한 인증을 변경하는 중 문제 발생" -#. Initialization dialog caption -#: src/include/iscsi-lio-server/wizards.rb:110 +#. Initialization dialog caption +#: src/include/iscsi-lio-server/wizards.rb:110 msgid "iSCSI LIO Target Configuration" msgstr "iSCSI LIO 대상 구성" -#. Initialization dialog contents -#: src/include/iscsi-lio-server/wizards.rb:112 +#. Initialization dialog contents +#: src/include/iscsi-lio-server/wizards.rb:112 msgid "Initializing..." msgstr "초기화 중..." -#. scope link IPv6 -#: src/modules/IscsiLioData.rb:1438 +#. scope link IPv6 +#: src/modules/IscsiLioData.rb:1438 msgid "Cannot save lio setup" msgstr "lio 설치를 저장할 수 없습니다." -#: src/modules/IscsiLioData.rb:1442 +#: src/modules/IscsiLioData.rb:1442 msgid "Cannot save tcm setup" msgstr "tcm 설치를 저장할 수 없습니다." -#. test if required package ("lio-utils") is installed -#: src/modules/IscsiLioServer.rb:136 +#. test if required package ("lio-utils") is installed +#: src/modules/IscsiLioServer.rb:136 msgid "Can't continue without installing lio-utils package" msgstr "lio-utils 패키지를 설치하지 않으면 계속할 수 없습니다." -#. to translator: %1 is replaced by pathname e.g. /etc/init.d/target -#: src/modules/IscsiLioServer.rb:177 +#. to translator: %1 is replaced by pathname e.g. /etc/init.d/target +#: src/modules/IscsiLioServer.rb:177 msgid "Could not start service \"%1\"" msgstr "\"%1\" 서비스를 시작할 수 없습니다." -#. IscsiLioServer read dialog caption -#: src/modules/IscsiLioServer.rb:190 +#. IscsiLioServer read dialog caption +#: src/modules/IscsiLioServer.rb:190 msgid "Initializing iSCSI LIO Target Configuration" msgstr "iSCSI LIO 대상 구성 초기화 중" -#. Progress stage 1/3 -#: src/modules/IscsiLioServer.rb:206 +#. Progress stage 1/3 +#: src/modules/IscsiLioServer.rb:206 msgid "Read the database" msgstr "데이터베이스 읽기" -#. Progress stage 2/3 -#: src/modules/IscsiLioServer.rb:208 +#. Progress stage 2/3 +#: src/modules/IscsiLioServer.rb:208 msgid "Read the previous settings" msgstr "이전 설정 읽기" -#. Progress stage 3/3 -#: src/modules/IscsiLioServer.rb:210 +#. Progress stage 3/3 +#: src/modules/IscsiLioServer.rb:210 msgid "Detect the devices" msgstr "장치 검색" -#. Progress step 1/3 -#: src/modules/IscsiLioServer.rb:214 +#. Progress step 1/3 +#: src/modules/IscsiLioServer.rb:214 msgid "Reading the database..." msgstr "데이터베이스를 읽는 중..." -#. Progress step 2/3 -#: src/modules/IscsiLioServer.rb:216 +#. Progress step 2/3 +#: src/modules/IscsiLioServer.rb:216 msgid "Reading the previous settings..." msgstr "이전 설정을 읽는 중..." -#. Progress step 3/3 -#: src/modules/IscsiLioServer.rb:218 +#. Progress step 3/3 +#: src/modules/IscsiLioServer.rb:218 msgid "Detecting the devices..." msgstr "장치를 검색하는 중..." -#. Progress finished -#. Progress finished -#: src/modules/IscsiLioServer.rb:220 src/modules/IscsiLioServer.rb:306 +#. Progress finished +#. Progress finished +#: src/modules/IscsiLioServer.rb:220 src/modules/IscsiLioServer.rb:306 msgid "Finished" msgstr "완료됨" -#. read configuration (/etc/ietd.conf) -#: src/modules/IscsiLioServer.rb:245 +#. read configuration (/etc/ietd.conf) +#: src/modules/IscsiLioServer.rb:245 msgid "" "You have currently no active LIO targets but there seems \n" "to be a valid config in /etc/ietd.conf. Should the module \n" @@ -851,37 +793,37 @@ "올바른 구성이 있는 것 같습니다. 모듈이 /etc/ietd.conf에서 \n" "LIO로 설정을 임포트하도록 하시겠습니까?" -#: src/modules/IscsiLioServer.rb:254 +#: src/modules/IscsiLioServer.rb:254 msgid "Errors during import. Check LIO state!" msgstr "임포트하는 중 오류가 발생했습니다. LIO 상태를 확인하십시오." -#. IscsiLioServer write dialog caption -#: src/modules/IscsiLioServer.rb:281 +#. IscsiLioServer write dialog caption +#: src/modules/IscsiLioServer.rb:281 msgid "Saving iSCSI LIO Target Configuration" msgstr "iSCSI LIO 대상 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/IscsiLioServer.rb:296 +#. Progress stage 1/2 +#: src/modules/IscsiLioServer.rb:296 msgid "Write firewall settings" msgstr "방화벽 설정 저장" -#. Progress stage 2/2 -#: src/modules/IscsiLioServer.rb:298 +#. Progress stage 2/2 +#: src/modules/IscsiLioServer.rb:298 msgid "Write lio configuration" msgstr "lio 구성 쓰기" -#. Progress step 1/2 -#: src/modules/IscsiLioServer.rb:302 +#. Progress step 1/2 +#: src/modules/IscsiLioServer.rb:302 msgid "Writing the firewall settings..." msgstr "방화벽 설정 쓰는 중..." -#. Progress step 2/2 -#: src/modules/IscsiLioServer.rb:304 +#. Progress step 2/2 +#: src/modules/IscsiLioServer.rb:304 msgid "Writing lio configuration..." msgstr "lio 구성을 쓰는 중..." -#. Create a textual summary and a list of unconfigured cards -#. @return summary of the current configuration -#: src/modules/IscsiLioServer.rb:425 +#. Create a textual summary and a list of unconfigured cards +#. @return summary of the current configuration +#: src/modules/IscsiLioServer.rb:425 msgid "Configuration summary..." msgstr "구성 요약..." Modified: branches/SLE12-SP3/yast/ko/po/isns.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/isns.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/isns.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,109 +14,109 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xisns module -#: src/clients/isns.rb:35 +#. Command line help text for the Xisns module +#: src/clients/isns.rb:35 msgid "Configuration of an isns service" msgstr "isns 서비스 구성" -#. progress step title -#: src/clients/isns_finish.rb:44 +#. progress step title +#: src/clients/isns_finish.rb:44 msgid "Saving iSCSI configuration..." msgstr "iSCSI 구성 저장 중..." -#. Rich text title for IsnsServer in proposals -#: src/clients/isns_proposal.rb:65 +#. Rich text title for IsnsServer in proposals +#: src/clients/isns_proposal.rb:65 msgid "iSCSI Initiator" msgstr "iSCSI 이니시에이터" -#. Menu title for IsnsServer in proposals -#: src/clients/isns_proposal.rb:69 +#. Menu title for IsnsServer in proposals +#: src/clients/isns_proposal.rb:69 msgid "&iSCSI Initiator" msgstr "iSCSI 이니시에이터(&I)" -#. first tab - service status and firewall -#: src/include/isns/dialogs.rb:34 +#. first tab - service status and firewall +#: src/include/isns/dialogs.rb:34 msgid "Service" msgstr "서비스" -#. second tab - iSCSI Nodes -#: src/include/isns/dialogs.rb:55 src/include/isns/dialogs.rb:102 +#. second tab - iSCSI Nodes +#: src/include/isns/dialogs.rb:55 src/include/isns/dialogs.rb:102 msgid "iSCSI Nodes" msgstr "ISCSI 노드" -#. third tab - Discovery Domains -#: src/include/isns/dialogs.rb:65 src/include/isns/dialogs.rb:120 +#. third tab - Discovery Domains +#: src/include/isns/dialogs.rb:65 src/include/isns/dialogs.rb:120 msgid "Discovery Domains" msgstr "검색 도메인" -#: src/include/isns/dialogs.rb:87 +#: src/include/isns/dialogs.rb:87 msgid "When &Booting" msgstr "부팅 시(&B)" -#: src/include/isns/dialogs.rb:88 +#: src/include/isns/dialogs.rb:88 msgid "&Manually" msgstr "수동(&M)" -#: src/include/isns/dialogs.rb:91 +#: src/include/isns/dialogs.rb:91 msgid "When Booting" msgstr "부팅 시" -#: src/include/isns/dialogs.rb:92 +#: src/include/isns/dialogs.rb:92 msgid "Manually" msgstr "수동" -#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156 -#: src/include/isns/widgets.rb:66 +#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156 +#: src/include/isns/widgets.rb:66 msgid "iSCSI Node Name" msgstr "iSCSI 노드 이름" -#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156 -#: src/include/isns/widgets.rb:108 +#: src/include/isns/dialogs.rb:105 src/include/isns/dialogs.rb:156 +#: src/include/isns/widgets.rb:108 msgid "Node Type" msgstr "노드 유형" -#: src/include/isns/dialogs.rb:108 src/include/isns/dialogs.rb:133 +#: src/include/isns/dialogs.rb:108 src/include/isns/dialogs.rb:133 msgid "Delete" msgstr "삭제" -#: src/include/isns/dialogs.rb:126 src/include/isns/widgets.rb:29 +#: src/include/isns/dialogs.rb:126 src/include/isns/widgets.rb:29 msgid "Discovery Domain Name" msgstr "검색 도메인 이름" -#: src/include/isns/dialogs.rb:132 +#: src/include/isns/dialogs.rb:132 msgid "Create Discovery Domain" msgstr "검색 도메인 생성" -#: src/include/isns/dialogs.rb:151 +#: src/include/isns/dialogs.rb:151 msgid "Discovery Domain Members" msgstr "검색 도메인 구성원" -#: src/include/isns/dialogs.rb:162 +#: src/include/isns/dialogs.rb:162 msgid "Add Existing iSCSI Node" msgstr "기존 iSCSI 노드 추가" -#: src/include/isns/dialogs.rb:163 +#: src/include/isns/dialogs.rb:163 msgid "Create iSCSI Node Member" msgstr "iSCSI 노드 구성원 생성" -#: src/include/isns/dialogs.rb:164 +#: src/include/isns/dialogs.rb:164 msgid "Remove" msgstr "제거" -#. Summary dialog -#. @return dialog result -#. Main dialog - tabbed -#: src/include/isns/dialogs.rb:185 +#. Summary dialog +#. @return dialog result +#. Main dialog - tabbed +#: src/include/isns/dialogs.rb:185 msgid "iSNS Service" msgstr "isns 서비스" -#. curr_target = ""; -#: src/include/isns/dialogs.rb:198 +#. curr_target = ""; +#: src/include/isns/dialogs.rb:198 msgid "<h1>iSNS Service</h1>" msgstr "<h1>isns 서비스</h1>" -#. Read dialog help 1/2 -#: src/include/isns/helps.rb:17 +#. Read dialog help 1/2 +#: src/include/isns/helps.rb:17 msgid "" "<p><b><big>Initializing iSNS daemon configuration</big></b><br>\n" "</p>\n" @@ -124,8 +124,8 @@ "<p><b><big>iSNS 데몬 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/isns/helps.rb:21 +#. Read dialog help 2/2 +#: src/include/isns/helps.rb:21 msgid "" "<p><b><big>Aborting Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -133,8 +133,8 @@ "<p><b><big> </big></b><br>\n" " <b></b> .</p>\n" -#. Write dialog help 1/2 -#: src/include/isns/helps.rb:25 +#. Write dialog help 1/2 +#: src/include/isns/helps.rb:25 msgid "" "<p><b><big>Saving iSNS Configuration</big></b><br>\n" "</p>\n" @@ -142,8 +142,8 @@ "<p><b><big>iSNS 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/isns/helps.rb:29 +#. Write dialog help 2/2 +#: src/include/isns/helps.rb:29 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -155,8 +155,8 @@ " .\n" "</p>\n" -#. Summary dialog help 1/3 -#: src/include/isns/helps.rb:36 +#. Summary dialog help 1/3 +#: src/include/isns/helps.rb:36 msgid "" "<p><b><big>iSNS Configuration</big></b><br>\n" "Configure an iSNS server.<br></p>\n" @@ -164,144 +164,96 @@ "<p><b><big>iSNS 구성</big></b><br>\n" "iSNS 서버를 구성합니다.<br></p>\n" -#: src/include/isns/helps.rb:39 -msgid "" -"<p>The list of all available iSCSI nodes registered with the iSNS service " -"are displayed.</p> <p>Nodes are registered by iSCSI initiators and iSCSI " -"targets.</p> <p> It is only possible to <b>delete</b> them. Deleting a node " -"removes it from the iSNS database.</p>" -msgstr "" -"<p>iSNS 서비스에 등록된 사용 가능한 iSCSI 노드 목록이 모두 표시됩니다.</p> " -"<p>노드는 iSCSI 이니시에이터와 iSCSI 대상에서 등록됩니다.</p> <p> 이 항목들" -"은 <b>삭제</b>만 가능합니다. 노드를 삭제하면 iSNS 데이터베이스에서 제거됩니" -"다.</p>" +#: src/include/isns/helps.rb:39 +msgid "<p>The list of all available iSCSI nodes registered with the iSNS service are displayed.</p> <p>Nodes are registered by iSCSI initiators and iSCSI targets.</p> <p> It is only possible to <b>delete</b> them. Deleting a node removes it from the iSNS database.</p>" +msgstr "<p>iSNS 서비스에 등록된 사용 가능한 iSCSI 노드 목록이 모두 표시됩니다.</p> <p>노드는 iSCSI 이니시에이터와 iSCSI 대상에서 등록됩니다.</p> <p> 이 항목들은 <b>삭제</b>만 가능합니다. 노드를 삭제하면 iSNS 데이터베이스에서 제거됩니다.</p>" -#. discovery domains -#: src/include/isns/helps.rb:43 -msgid "" -"A list of all discovery domains is displayed. It is possible to <b>Create a discovery domain or <b>Delete</b> one. <p>Deleting a domain removes the " -"members from the domain but does not delete the iSCSI node members.</p>" -msgstr "" -"모든 검색 도메인 목록이 표시됩니다. 검색 도메인을 <b>생성</b> 또는 <b>삭제할 수 있습니다. <p>도메인을 삭제하면 도메인에서 구성원이 제거되지만 iSCSI " -"노드 구성원은 삭제되지 않습니다.</p>" +#. discovery domains +#: src/include/isns/helps.rb:43 +msgid "A list of all discovery domains is displayed. It is possible to <b>Create</b> a discovery domain or <b>Delete</b> one. <p>Deleting a domain removes the members from the domain but does not delete the iSCSI node members.</p>" +msgstr "모든 검색 도메인 목록이 표시됩니다. 검색 도메인을 <b>생성</b> 또는 <b>삭제</b>할 수 있습니다. <p>도메인을 삭제하면 도메인에서 구성원이 제거되지만 iSCSI 노드 구성원은 삭제되지 않습니다.</p>" -#: src/include/isns/helps.rb:46 -msgid "" -"A list of all iSCSI nodes are displayed by discovery domain. Selecting " -"another discovery domain refreshes the list with members from that discovery " -"domain. It is possible to <b>Add</b> an iSCSI node to a discovery domain or " -"<b>Delete</b> the node. <p>Deleting a node removes it from the domain but " -"does not delete the iSCSI node</p> <p>Creating an iSCSI node allows a not " -"yet registered node to be added as a member of the discovery domain. When " -"the initiator or target registers this node then it becomes part of this " -"domain</p> <p>When an iSCSI initiator does a discovery request, the iSNS " -"service returns all iSCSI node targets that are members of the same " -"Discovery Domains.</p> " -msgstr "" -"검색 도메인별로 모든 iSCSI 노드 목록이 표시됩니다. 다른 검색 도메인을 선택하" -"면 검색 도메인의 구성원으로 목록이 새로 고쳐집니다. 검색 도메인에 iSCSI 노드" -"를 <b>추가</b>하거나 노드를 <b>삭제</b>할 수 있습니다. <p>노드를 삭제하면 도" -"메인에서 제거되지만 iSCSI 노드는 삭제되지 않습니다.</p> <p>iSCSI 노드를 생성" -"하면 아직 등록되지 않은 노드를 검색 도메인의 구성원으로 추가할 수 있습니다. " -"이니시에이터 또는 대상이 이 노드를 등록하면 이 도메인의 일부가 됩니다.</p> " -"<p>iSCSI 이니시에이터가 검색 요청을 수행하는 경우 iSNS 서비스에서 동일한 검" -"색 도메인의 구성원인 iSCSI 노드 대상을 모두 반환합니다.</p> " +#: src/include/isns/helps.rb:46 +msgid "A list of all iSCSI nodes are displayed by discovery domain. Selecting another discovery domain refreshes the list with members from that discovery domain. It is possible to <b>Add</b> an iSCSI node to a discovery domain or <b>Delete</b> the node. <p>Deleting a node removes it from the domain but does not delete the iSCSI node</p> <p>Creating an iSCSI node allows a not yet registered node to be added as a member of the discovery domain. When the initiator or target registers this node then it becomes part of this domain</p> <p>When an iSCSI initiator does a discovery request, the iSNS service returns all iSCSI node targets that are members of the same Discovery Domains.</p> " +msgstr "검색 도메인별로 모든 iSCSI 노드 목록이 표시됩니다. 다른 검색 도메인을 선택하면 검색 도메인의 구성원으로 목록이 새로 고쳐집니다. 검색 도메인에 iSCSI 노드를 <b>추가</b>하거나 노드를 <b>삭제</b>할 수 있습니다. <p>노드를 삭제하면 도메인에서 제거되지만 iSCSI 노드는 삭제되지 않습니다.</p> <p>iSCSI 노드를 생성하면 아직 등록되지 않은 노드를 검색 도메인의 구성원으로 추가할 수 있습니다. 이니시에이터 또는 대상이 이 노드를 등록하면 이 도메인의 일부가 됩니다.</p> <p>iSCSI 이니시에이터가 검색 요청을 수행하는 경우 iSNS 서비스에서 동일한 검색 도메인의 구성원인 iSCSI 노드 대상을 모두 반환합니다.</p> " -#. dds table dialog -#: src/include/isns/helps.rb:50 -msgid "" -"At the top a list of all Discovery Domain Sets are displayed. Discovery " -"Domains belong to Discovery Domain Sets. <p>A Discovery Domain must be a " -"member of a Discovery Domain Set in order to be active. </p><p>In an iSNS " -"database, a Discovery Domain Set contains Discovery Domains and Discovery " -"Domains contain iSCSI Node members.</p>" -msgstr "" -"맨 위에 모든 Discovery 도메인 모음 목록이 표시됩니다. Discovery 도메인은 " -"Discovery 도메인 모음에 속합니다. <p>Discovery 도메인이 활성화 되기 위해서는 " -"Discovery 도메인 모음의 구성원이어야 합니다.</p>iSNS 데이터베이스에서 " -"Discovery 도메인 세트는 Discovery 도메인과 Discovery 도메인에 포함되는 iSCSI " -"노드 구성원을 포함합니다.</p>" +#. dds table dialog +#: src/include/isns/helps.rb:50 +msgid "At the top a list of all Discovery Domain Sets are displayed. Discovery Domains belong to Discovery Domain Sets. <p>A Discovery Domain must be a member of a Discovery Domain Set in order to be active. </p><p>In an iSNS database, a Discovery Domain Set contains Discovery Domains and Discovery Domains contain iSCSI Node members.</p>" +msgstr "맨 위에 모든 Discovery 도메인 모음 목록이 표시됩니다. Discovery 도메인은 Discovery 도메인 모음에 속합니다. <p>Discovery 도메인이 활성화 되기 위해서는 Discovery 도메인 모음의 구성원이어야 합니다.</p>iSNS 데이터베이스에서 Discovery 도메인 세트는 Discovery 도메인과 Discovery 도메인에 포함되는 iSCSI 노드 구성원을 포함합니다.</p>" -#: src/include/isns/helps.rb:53 -msgid "" -"<p>The discovery domain set members list is refreshed whenever a different " -"discovery domain set is selected.</p>" -msgstr "" -"<p>다른 검색 도메인 집합을 선택할 때마다 검색 도메인 집합 구성원 목록이 새로 " -"고쳐집니다.</p>" +#: src/include/isns/helps.rb:53 +msgid "<p>The discovery domain set members list is refreshed whenever a different discovery domain set is selected.</p>" +msgstr "<p>다른 검색 도메인 집합을 선택할 때마다 검색 도메인 집합 구성원 목록이 새로 고쳐집니다.</p>" -#. **************** global funcions and variables ***** -#: src/include/isns/widgets.rb:25 +#. **************** global funcions and variables ***** +#: src/include/isns/widgets.rb:25 msgid "Create New Discovery Domain" msgstr "새 검색 도메인 생성" -#: src/include/isns/widgets.rb:102 +#: src/include/isns/widgets.rb:102 msgid "Add iSCSI node to discovery domain" msgstr "검색 도메인에 iSCSI 노드 추가" -#: src/include/isns/widgets.rb:105 +#: src/include/isns/widgets.rb:105 msgid "Available Nodes to Add" msgstr "추가할 수 있는 노드" -#: src/include/isns/widgets.rb:108 +#: src/include/isns/widgets.rb:108 msgid "Name" msgstr "이름" -#: src/include/isns/widgets.rb:112 +#: src/include/isns/widgets.rb:112 msgid "Add Node" msgstr "노드 추가" -#: src/include/isns/widgets.rb:113 +#: src/include/isns/widgets.rb:113 msgid "Done" msgstr "완료" -#: src/include/isns/widgets.rb:145 src/include/isns/widgets.rb:168 +#: src/include/isns/widgets.rb:145 src/include/isns/widgets.rb:168 msgid "Target or Initiator" msgstr "대상 또는 이니시에이터" -#: src/include/isns/widgets.rb:241 +#: src/include/isns/widgets.rb:241 msgid "Really delete the selected item?" msgstr "선택한 항목을 삭제하시겠습니까?" -#: src/include/isns/widgets.rb:270 +#: src/include/isns/widgets.rb:270 msgid "Really delete this domain?" msgstr "이 도메인을 삭제하시겠습니까?" -#. boolean display = true; -#. Report::DisplayErrors(display,10); -#: src/include/isns/widgets.rb:351 +#. boolean display = true; +#. Report::DisplayErrors(display,10); +#: src/include/isns/widgets.rb:351 msgid "Unable to connect to iSNS server. Check if iSNS server is running." msgstr "iSNS 서버에 연결할 수 없습니다. iSNS 서버가 실행 중인지 확인하십시오." -#. Initialization dialog caption -#: src/include/isns/wizards.rb:70 +#. Initialization dialog caption +#: src/include/isns/wizards.rb:70 msgid "isns Daemon Configuration" msgstr "isns 데몬 구성" -#. Initialization dialog contents -#: src/include/isns/wizards.rb:72 +#. Initialization dialog contents +#: src/include/isns/wizards.rb:72 msgid "Initializing..." msgstr "초기화 중..." -#. test if required package ("open-isns") is installed -#: src/modules/IsnsServer.rb:149 -msgid "" -"<p>To configure the isns service, the <b>%1</b> package must be installed." +#. test if required package ("open-isns") is installed +#: src/modules/IsnsServer.rb:149 +msgid "<p>To configure the isns service, the <b>%1</b> package must be installed.</p>" msgstr "<p>isns 서비스를 구성하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" -#: src/modules/IsnsServer.rb:152 +#: src/modules/IsnsServer.rb:152 msgid "<p>Install it now?</p>" msgstr "<p>지금 설치하시겠습니까?</p>" -#. IsnsServer read dialog caption -#: src/modules/IsnsServer.rb:277 +#. IsnsServer read dialog caption +#: src/modules/IsnsServer.rb:277 msgid "Initializing isns daemon configuration" msgstr "isns 데몬 구성 초기화" -#. IsnsServer write dialog caption -#: src/modules/IsnsServer.rb:300 +#. IsnsServer write dialog caption +#: src/modules/IsnsServer.rb:300 msgid "Saving isns Configuration" msgstr "isns 구성 저장" Modified: branches/SLE12-SP3/yast/ko/po/journal.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/journal.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/journal.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -5,7 +5,7 @@ msgstr "" "Project-Id-Version: journal\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2016-09-09 15:05+0200\n" +"POT-Creation-Date: 2016-08-30 18:28+0200\n" "PO-Revision-Date: 2016-09-19 13:48\n" "Last-Translator: Novell language \n" "Language-Team: Novell language \n" Modified: branches/SLE12-SP3/yast/ko/po/journalctl.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/journalctl.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/journalctl.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -5,7 +5,7 @@ msgstr "" "Project-Id-Version: journalctl\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2016-08-04 14:55+0200\n" +"POT-Creation-Date: 2016-08-30 18:28+0200\n" "PO-Revision-Date: 2016-09-28 11:44\n" "Last-Translator: Novell language \n" "Language-Team: Novell language \n" Modified: branches/SLE12-SP3/yast/ko/po/kdump.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/kdump.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/kdump.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,368 +14,344 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the kdump module -#: src/clients/kdump.rb:59 +#. Command line help text for the kdump module +#: src/clients/kdump.rb:59 msgid "Configuration of kdump" msgstr "kdump 구성" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:69 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:69 msgid "Display settings" msgstr "디스플레이 설정" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:75 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:75 msgid "Start-up settings" msgstr "시작 설정" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:81 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:81 msgid "Dump Level number 0-31" msgstr "덤프 수준 번호 0-31" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:89 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:89 msgid "Dump format for dump image none/ELF/compressed/lzo" msgstr "덤프 이미지에 대한 덤프 형식 없음/ELF/압축/lzo" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:102 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:102 msgid "Dump target includes destination for saving dump images" msgstr "덤프 대상에 덤프 이미지를 저장하기 위한 대상이 포함됩니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:117 -msgid "" -"The naming scheme is:/boot/vmlinu[zx]-[.gz] Please enter only " -"\"kernel_string\"." -msgstr "" -"명명 구조:/boot/vmlinu[zx]-[.gz]. \"kernel_string\"만 입력하십" -"시오." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:117 +msgid "The naming scheme is:/boot/vmlinu[zx]-[.gz] Please enter only \"kernel_string\"." +msgstr "명명 구조:/boot/vmlinu[zx]-[.gz]. \"kernel_string\"만 입력하십시오." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:128 -msgid "" -"The kdump commandline is the command line that needs to be passed off to the " -"kdump kernel." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:128 +msgid "The kdump commandline is the command line that needs to be passed off to the kdump kernel." msgstr "kdump 명령줄은 kdump 커널에 전달해야 할 명령줄입니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:139 -msgid "" -"Set this variable if you only want to _append_ values to the default command " -"line string." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:139 +msgid "Set this variable if you only want to _append_ values to the default command line string." msgstr "기본 명령줄 문자열에 값을 _추가_만 할 경우 이 변수를 설정합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:150 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:150 msgid "Immediately reboot after saving the core in the kdump kernel." msgstr "Kdump 커널에 코어를 저장한 후 즉시 재부팅합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:158 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:158 msgid "Copy kernel into dump directory." msgstr "덤프 디렉토리로 커널을 복사합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:166 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:166 msgid "Specifies how many old dumps are kept. 0 means keep all." msgstr "보관된 이전 덤프 수를 지정합니다. 0은 전체를 의미합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:174 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:174 msgid "SMTP server for sending notification messages." msgstr "알림 메시지를 보내기 위한 SMTP 서버입니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:182 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:182 msgid "SMTP username for sending notification messages." msgstr "알림 메시지를 보내기 위한 SMTP 사용자 이름입니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:190 -msgid "" -"SMTP password for sending notification messages. Path of file which includes " -"password (plain text file)." -msgstr "" -"알림 메시지를 보내기 위한 SMTP 비밀번호입니다. 비밀번호가 포함된 파일(일반 텍" -"스트 파일)의 경로입니다." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:190 +msgid "SMTP password for sending notification messages. Path of file which includes password (plain text file)." +msgstr "알림 메시지를 보내기 위한 SMTP 비밀번호입니다. 비밀번호가 포함된 파일(일반 텍스트 파일)의 경로입니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:198 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:198 msgid "Email address for sending notification messages" msgstr "알림 메시지를 보내는 데 사용할 전자 메일 주소" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:209 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:209 msgid "Email address for sending copy of notification messages" msgstr "알림 메시지 사본을 보내는 데 사용할 전자 메일 주소" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:221 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:221 msgid "Enable option" msgstr "옵션 활성화" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:225 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:225 msgid "Disable option" msgstr "옵션 비활성화" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:229 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:229 msgid "Shows current option status" msgstr "현재 옵션 상태 표시" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:234 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:234 msgid "Size of allocated memory MB" msgstr "할당된 메모리 크기(MB)" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:241 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:241 msgid "Number for dump level includes pages for saving" msgstr "덤프 수준 수에는 저장할 페이지가 포함됩니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:248 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:248 msgid "Dump format can be none, ELF, compressed or lzo" msgstr "덤프 형식은 없음, ELF, 압축 또는 lzo일 수 있습니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:255 -msgid "" -"Dump target includes type of target from: file (local filesystem), ftp, ssh, " -"sftp, nfs, cifs" -msgstr "" -"덤프 대상에는 파일(로컬 파일 시스템), ftp, ssh, sftp, nfs, cifs의 대상 유형" -"이 포함됩니다." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:255 +msgid "Dump target includes type of target from: file (local filesystem), ftp, ssh, sftp, nfs, cifs" +msgstr "덤프 대상에는 파일(로컬 파일 시스템), ftp, ssh, sftp, nfs, cifs의 대상 유형이 포함됩니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:262 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:262 msgid "Name of server" msgstr "서버 이름" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:267 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:267 msgid "Port for connection" msgstr "연결 포트" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:272 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:272 msgid "Directory for saving dump images" msgstr "덤프 이미지를 저장할 디렉토리" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:279 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:279 msgid "Exported share" msgstr "내보낸 공유" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:284 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:284 msgid "User name" msgstr "사용자 이름" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:289 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:289 msgid "Path of file which includes password (plain text file)" msgstr "암호를 포함하는 파일 경로(일반 텍스트 파일)" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:296 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:296 msgid "udev_id of raw partition" msgstr "원시 파티션의 udev_id" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:303 -msgid "" -"The naming scheme is: /boot/vmlinu[zx]-[.gz] kernel means " -"only \"kernel_string\"." -msgstr "" -"명명 구조: /boot/vmlinu[zx]-[.gz]. 커널은 \"kernel_string\"만 " -"의미합니다." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:303 +msgid "The naming scheme is: /boot/vmlinu[zx]-[.gz] kernel means only \"kernel_string\"." +msgstr "명명 구조: /boot/vmlinu[zx]-[.gz]. 커널은 \"kernel_string\"만 의미합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:310 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:310 msgid "Include command line options." msgstr "명령줄 옵션을 포함합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:317 -msgid "" -"Option means runlevel to boot the kdump kernel. Only values such as 1,2,3,5 " -"or s are allowed" -msgstr "" -"옵션은 kdump 커널을 부팅하는 실행 수준을 의미합니다. 1,2,3,5 또는 s와 같은 값" -"만 허용됩니다." +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:317 +msgid "Option means runlevel to boot the kdump kernel. Only values such as 1,2,3,5 or s are allowed" +msgstr "옵션은 kdump 커널을 부팅하는 실행 수준을 의미합니다. 1,2,3,5 또는 s와 같은 값만 허용됩니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:324 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:324 msgid "Number of dumps. 0 means keep all." msgstr "덤프 수. 0은 모두 보관을 의미합니다." -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:331 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:331 msgid "Email address" msgstr "전자 메일 주소" -#. TRANSLATORS: CommandLine help -#: src/clients/kdump.rb:365 +#. TRANSLATORS: CommandLine help +#: src/clients/kdump.rb:365 msgid "Handles usage of firmware-assisted dump" msgstr "펌웨어 지원 덤프 사용 처리" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:415 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:415 msgid "Display Settings:" msgstr "디스플레이 설정:" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:420 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:420 msgid "Kdump is enabled (boot option \"crashkernel\" is added)" msgstr "Kdump가 활성화됨(부트 옵션 \"crashkernel\"이 추가됨)" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:425 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:425 msgid "Allocate memory (MB) for kdump is: %1" msgstr "Kdump의 메모리(MB) 할당: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:431 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:431 msgid "Kdump is disabled" msgstr "Kdump가 비활성화됨" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:437 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:437 msgid "Dump Level: %1" msgstr "덤프 수준: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:445 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:445 msgid "Dump Format: %1" msgstr "덤프 형식: %1" -#. parsing target info -#: src/clients/kdump.rb:452 +#. parsing target info +#: src/clients/kdump.rb:452 msgid "Dump Target Settings" msgstr "덤프 대상 설정" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:457 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:457 msgid "target: %1" msgstr "대상: %1" -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:467 src/clients/kdump.rb:494 src/clients/kdump.rb:537 -#: src/clients/kdump.rb:565 src/clients/kdump.rb:582 +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:467 src/clients/kdump.rb:494 src/clients/kdump.rb:537 +#: src/clients/kdump.rb:565 src/clients/kdump.rb:582 msgid "file directory: %1" msgstr "파일 디렉토리: %1" -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:477 src/clients/kdump.rb:518 src/clients/kdump.rb:558 -#: src/clients/kdump.rb:575 +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:477 src/clients/kdump.rb:518 src/clients/kdump.rb:558 +#: src/clients/kdump.rb:575 msgid "server name: %1" msgstr "서버 이름: %1" -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:486 src/clients/kdump.rb:528 +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:486 src/clients/kdump.rb:528 msgid "port: %1" msgstr "포트: %1" -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:502 src/clients/kdump.rb:597 +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:502 src/clients/kdump.rb:597 msgid "user name: anonymous connection is allowed" msgstr "사용자 이름: 익명 연결이 허용됨" -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:507 src/clients/kdump.rb:547 src/clients/kdump.rb:602 +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:507 src/clients/kdump.rb:547 src/clients/kdump.rb:602 msgid "user name: %1" msgstr "사용자 이름: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:589 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:589 msgid "share: %1" msgstr "공유: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:610 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:610 msgid "EMPTY" msgstr "비어 있음" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:618 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:618 msgid "Custom kdump kernel: %1" msgstr "사용자 정의 kdump 커널: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:629 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:629 msgid "Kdump command line: %1" msgstr "Kdump 명령줄: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:640 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:640 msgid "Kdump command line append: %1" msgstr "Kdump 명령줄 추가: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:650 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:650 msgid "Kdump immediate reboots: %1" msgstr "Kdump 즉시 재부팅: %1" -#: src/clients/kdump.rb:652 src/clients/kdump.rb:1262 +#: src/clients/kdump.rb:652 src/clients/kdump.rb:1262 msgid "Enabled" msgstr "활성화됨" -#: src/clients/kdump.rb:653 src/clients/kdump.rb:1263 +#: src/clients/kdump.rb:653 src/clients/kdump.rb:1263 msgid "Disabled" msgstr "비활성화" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:662 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:662 msgid "Numbers of old dumps: All dumps are saved without deleting old dumps" msgstr "이전 덤프 수: 이전 덤프를 삭제하지 않고 모든 덤프를 저장합니다." -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:670 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:670 msgid "Numbers of old dumps: %1" msgstr "이전 덤프 수: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:681 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:681 msgid "Kdump SMTP Server: %1" msgstr "Kdump SMTP 서버: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:692 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:692 msgid "Kdump SMTP User: %1" msgstr "Kdump SMTP 사용자: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:701 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:701 msgid "Kdump SMTP Password: ********" msgstr "Kdump SMTP 비밀번호: ********" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:709 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:709 msgid "Kdump Sending Notification To: %1" msgstr "Kdump의 알림 받는 사람: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:720 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:720 msgid "Kdump Sending Copy of Notification To: %1" msgstr "Kdump의 알림 사본을 받는 사람: %1" -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:747 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:747 msgid "" "Kernel option \"crashkernel\" includes ranges and/or redundant values.\n" "It will be rewritten." @@ -383,387 +359,383 @@ "커널 옵션 \"crashkernel\"에 범위 및/또는 중복 값이 포함되어 있습니다.\n" "재작성됩니다." -#. Force value to false, so it's actually rewritten -#. TRANSLATORS: CommandLine printed text -#. delete crashkernel parameter from bootloader -#: src/clients/kdump.rb:755 src/clients/kdump.rb:760 src/modules/Kdump.rb:513 +#. Force value to false, so it's actually rewritten +#. TRANSLATORS: CommandLine printed text +#. delete crashkernel parameter from bootloader +#: src/clients/kdump.rb:755 src/clients/kdump.rb:760 src/modules/Kdump.rb:513 msgid "To apply changes a reboot is necessary." msgstr "변경사항을 적용하려면 재부팅해야 합니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:764 src/clients/kdump.rb:790 src/clients/kdump.rb:819 -#: src/clients/kdump.rb:1051 src/clients/kdump.rb:1068 -#: src/clients/kdump.rb:1085 src/clients/kdump.rb:1102 -#: src/clients/kdump.rb:1117 src/clients/kdump.rb:1133 -#: src/clients/kdump.rb:1156 src/clients/kdump.rb:1176 -#: src/clients/kdump.rb:1196 src/clients/kdump.rb:1210 -#: src/clients/kdump.rb:1233 src/clients/kdump.rb:1253 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:764 src/clients/kdump.rb:790 src/clients/kdump.rb:819 +#: src/clients/kdump.rb:1051 src/clients/kdump.rb:1068 +#: src/clients/kdump.rb:1085 src/clients/kdump.rb:1102 +#: src/clients/kdump.rb:1117 src/clients/kdump.rb:1133 +#: src/clients/kdump.rb:1156 src/clients/kdump.rb:1176 +#: src/clients/kdump.rb:1196 src/clients/kdump.rb:1210 +#: src/clients/kdump.rb:1233 src/clients/kdump.rb:1253 msgid "Wrong options were used." msgstr "잘못된 옵션이 사용되었습니다." -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:781 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:781 msgid "Dump level was set." msgstr "덤프 수준이 설정되었습니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:785 src/clients/kdump.rb:810 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:785 src/clients/kdump.rb:810 msgid "Wrong value of option." msgstr "옵션의 잘못된 값." -#. TRANSLATORS: CommandLine printed text -#: src/clients/kdump.rb:806 +#. TRANSLATORS: CommandLine printed text +#: src/clients/kdump.rb:806 msgid "Dump format was set." msgstr "덤프 형식이 설정되었습니다." -#. TRANSLATORS: CommandLine printed text help -#: src/clients/kdump.rb:813 -msgid "" -"Option can include only \"none\", \"ELF\", \"compressed\" or \"lzo\" value." -msgstr "" -"옵션에는 \"없음\", \"ELF\", \"압축\" 또는 \"lzo\" 값만 포함할 수 있습니다." +#. TRANSLATORS: CommandLine printed text help +#: src/clients/kdump.rb:813 +msgid "Option can include only \"none\", \"ELF\", \"compressed\" or \"lzo\" value." +msgstr "옵션에는 \"없음\", \"ELF\", \"압축\" 또는 \"lzo\" 값만 포함할 수 있습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:833 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:833 msgid "File %1 does not exist." msgstr "%1 파일이 존재하지 않습니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:855 src/clients/kdump.rb:889 src/clients/kdump.rb:938 -#: src/clients/kdump.rb:972 src/clients/kdump.rb:1019 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:855 src/clients/kdump.rb:889 src/clients/kdump.rb:938 +#: src/clients/kdump.rb:972 src/clients/kdump.rb:1019 msgid "Value for \"dir\" missing." msgstr "\"dir\"에 대한 값이 누락되었습니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:869 src/clients/kdump.rb:919 src/clients/kdump.rb:960 -#: src/clients/kdump.rb:986 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:869 src/clients/kdump.rb:919 src/clients/kdump.rb:960 +#: src/clients/kdump.rb:986 msgid "Value for \"server\" missing." msgstr "\"server\"에 대한 값이 누락되었습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:998 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:998 msgid "Value for \"share\" missing." msgstr "\"share\"에 대한 값이 누락되었습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:1040 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:1040 msgid "Wrong value for target." msgstr "대상에 대한 값이 잘못되었습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:1151 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:1151 msgid "Wrong value of options \"no\"." msgstr "\"no\" 옵션의 값이 잘못되었습니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:1171 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:1171 msgid "Wrong value for option \"server\"." msgstr "잘못된 \"server\" 옵션 값입니다." -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:1191 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:1191 msgid "Wrong value for option \"user\"." msgstr "잘못된 \"user\" 옵션 값입니다." -#. TRANSLATORS: CommandLine error message -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:1228 src/clients/kdump.rb:1248 +#. TRANSLATORS: CommandLine error message +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:1228 src/clients/kdump.rb:1248 msgid "Wrong value for option \"email\"." msgstr "잘못된 \"email\" 옵션 값입니다." -#: src/clients/kdump.rb:1260 +#: src/clients/kdump.rb:1260 msgid "Firmware-assisted dump: %{status}" msgstr "펌웨어 지원 덤프: %{status}" -#. TRANSLATORS: CommandLine error message -#: src/clients/kdump.rb:1278 +#. TRANSLATORS: CommandLine error message +#: src/clients/kdump.rb:1278 msgid "No option has been defined." msgstr "옵션이 정의되지 않았습니다." -#. proposal part - kdump label -#: src/clients/kdump_proposal.rb:83 +#. proposal part - kdump label +#: src/clients/kdump_proposal.rb:83 msgid "Kdump" msgstr "Kdump" -#. menubutton entry -#: src/clients/kdump_proposal.rb:85 +#. menubutton entry +#: src/clients/kdump_proposal.rb:85 msgid "&Kdump" msgstr "Kdump(&K)" -#. TRANSLATORS: RadioButtonGroup Label -#: src/include/kdump/dialogs.rb:57 +#. TRANSLATORS: RadioButtonGroup Label +#: src/include/kdump/dialogs.rb:57 msgid "Enable/Disable Kdump" msgstr "Kdump 활성화/비활성화" -#: src/include/kdump/dialogs.rb:62 +#: src/include/kdump/dialogs.rb:62 msgid "Enable Kd&ump" msgstr "Kdump 활성화(&U)" -#: src/include/kdump/dialogs.rb:63 +#: src/include/kdump/dialogs.rb:63 msgid "&Disable Kdump" msgstr "Kdump 비활성화(&D)" -#. ---------============ Dump Filtering screen=============------------ -#: src/include/kdump/dialogs.rb:111 +#. ---------============ Dump Filtering screen=============------------ +#: src/include/kdump/dialogs.rb:111 msgid "Include in Dumping" msgstr "덤프에 포함" -#: src/include/kdump/dialogs.rb:118 +#: src/include/kdump/dialogs.rb:118 msgid "&Pages Filled with Zero" msgstr "0으로 채워진 페이지(&P)" -#. `VStretch () -#: src/include/kdump/dialogs.rb:124 +#. `VStretch () +#: src/include/kdump/dialogs.rb:124 msgid "Cach&e Pages" msgstr "캐시 페이지(&E)" -#: src/include/kdump/dialogs.rb:134 +#: src/include/kdump/dialogs.rb:134 msgid "Cache Priva&te Pages" msgstr "캐시 개인 페이지(&T)" -#: src/include/kdump/dialogs.rb:139 +#: src/include/kdump/dialogs.rb:139 msgid "&User Data Pages" msgstr "사용자 데이터 페이지(&U)" -#: src/include/kdump/dialogs.rb:140 +#: src/include/kdump/dialogs.rb:140 msgid "&Free Pages" msgstr "사용 가능한 페이지(&F)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:168 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:168 msgid "&Dump Format" msgstr "덤프 형식(&D)" -#: src/include/kdump/dialogs.rb:171 +#: src/include/kdump/dialogs.rb:171 msgid "&No Dump" msgstr "덤프 없음(&N)" -#: src/include/kdump/dialogs.rb:172 +#: src/include/kdump/dialogs.rb:172 msgid "&ELF Format" msgstr "ELF 형식(&E)" -#: src/include/kdump/dialogs.rb:173 +#: src/include/kdump/dialogs.rb:173 msgid "C&ompressed Format" msgstr "압축 형식(&O)" -#: src/include/kdump/dialogs.rb:174 +#: src/include/kdump/dialogs.rb:174 msgid "&LZO Compressed Format" msgstr "LZO 압축 형식(&L)" -#. ---------============ Dump Target screen=============------------ -#: src/include/kdump/dialogs.rb:194 +#. ---------============ Dump Target screen=============------------ +#: src/include/kdump/dialogs.rb:194 msgid "&Select Target" msgstr "대상 선택(&S)" -#: src/include/kdump/dialogs.rb:198 +#: src/include/kdump/dialogs.rb:198 msgid "Local Directory" msgstr "로컬 디렉토리" -#: src/include/kdump/dialogs.rb:199 src/include/kdump/uifunctions.rb:106 +#: src/include/kdump/dialogs.rb:199 src/include/kdump/uifunctions.rb:106 msgid "FTP" msgstr "FTP" -#: src/include/kdump/dialogs.rb:200 +#: src/include/kdump/dialogs.rb:200 msgid "SSH" msgstr "SSH" -#: src/include/kdump/dialogs.rb:201 +#: src/include/kdump/dialogs.rb:201 msgid "SFTP" msgstr "SFTP" -#: src/include/kdump/dialogs.rb:202 src/include/kdump/uifunctions.rb:173 +#: src/include/kdump/dialogs.rb:202 src/include/kdump/uifunctions.rb:173 msgid "NFS" msgstr "NFS" -#: src/include/kdump/dialogs.rb:203 src/include/kdump/uifunctions.rb:188 +#: src/include/kdump/dialogs.rb:203 src/include/kdump/uifunctions.rb:188 msgid "CIFS (SMB)" msgstr "CIFS(SMB)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:228 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:228 msgid "&SMTP Server" msgstr "SMTP 서버(&S)" -#. TRANSLATORS: TextEntry Label -#. text entry -#. text entry -#. text entry -#: src/include/kdump/dialogs.rb:240 src/include/kdump/uifunctions.rb:130 -#: src/include/kdump/uifunctions.rb:160 src/include/kdump/uifunctions.rb:212 +#. TRANSLATORS: TextEntry Label +#. text entry +#. text entry +#. text entry +#: src/include/kdump/dialogs.rb:240 src/include/kdump/uifunctions.rb:130 +#: src/include/kdump/uifunctions.rb:160 src/include/kdump/uifunctions.rb:212 msgid "&User Name" msgstr "사용자 이름(&U)" -#. TRANSLATORS: TextEntry Label -#. password entry -#. password entry -#. password entry -#: src/include/kdump/dialogs.rb:252 src/include/kdump/uifunctions.rb:133 -#: src/include/kdump/uifunctions.rb:163 src/include/kdump/uifunctions.rb:215 +#. TRANSLATORS: TextEntry Label +#. password entry +#. password entry +#. password entry +#: src/include/kdump/dialogs.rb:252 src/include/kdump/uifunctions.rb:133 +#: src/include/kdump/uifunctions.rb:163 src/include/kdump/uifunctions.rb:215 msgid "&Password" msgstr "암호(&P)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:264 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:264 msgid "Notification &To" msgstr "알림 대상(&T)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:280 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:280 msgid "Notifica&tion CC" msgstr "알림 참조(&T)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:297 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:297 msgid "Custom Kdump &Kernel" msgstr "사용자 정의 Kdump 커널(&K)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:309 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:309 msgid "Kdump Co&mmand Line" msgstr "Kdump 명령줄(&M)" -#. TRANSLATORS: TextEntry Label -#: src/include/kdump/dialogs.rb:321 +#. TRANSLATORS: TextEntry Label +#: src/include/kdump/dialogs.rb:321 msgid "Kdump Command &Line Append" msgstr "Kdump 명령줄 추가(&L)" -#. TRANSLATORS: CheckBox Label -#: src/include/kdump/dialogs.rb:338 +#. TRANSLATORS: CheckBox Label +#: src/include/kdump/dialogs.rb:338 msgid "&Enable Immediate Reboot After Saving the Core" msgstr "코어 저장 후 즉시 재부팅 활성화(&E)" -#. TRANSLATORS: CheckBox Label -#: src/include/kdump/dialogs.rb:352 +#. TRANSLATORS: CheckBox Label +#: src/include/kdump/dialogs.rb:352 msgid "Enable Copy Ke&rnel into the Dump Directory" msgstr "덤프 디렉토리로 복사 커널 활성화(&R)" -#. TRANSLATORS: CheckBox Label -#: src/include/kdump/dialogs.rb:366 +#. TRANSLATORS: CheckBox Label +#: src/include/kdump/dialogs.rb:366 msgid "Enable &Delete Old Dump Images" msgstr "이전 덤프 이미지 삭제 활성화(&D)" -#. TRANSLATORS: IntField Label -#: src/include/kdump/dialogs.rb:383 +#. TRANSLATORS: IntField Label +#: src/include/kdump/dialogs.rb:383 msgid "N&umber of Old Dumps" msgstr "이전 덤프 수(&U)" -#. "handle" : -#: src/include/kdump/dialogs.rb:408 +#. "handle" : +#: src/include/kdump/dialogs.rb:408 msgid "Kdump Memory" msgstr "Kdump 메모리" -#: src/include/kdump/dialogs.rb:413 +#: src/include/kdump/dialogs.rb:413 msgid "Kdump Start-Up" msgstr "Kdump 시작" -#: src/include/kdump/dialogs.rb:414 +#: src/include/kdump/dialogs.rb:414 msgid "Start-Up" msgstr "시작" -#: src/include/kdump/dialogs.rb:429 +#: src/include/kdump/dialogs.rb:429 msgid "Kdump - Dump Filtering" msgstr "Kdump - 덤프 필터링" -#: src/include/kdump/dialogs.rb:430 +#: src/include/kdump/dialogs.rb:430 msgid "Dump Filtering" msgstr "덤프 필터링" -#: src/include/kdump/dialogs.rb:436 +#: src/include/kdump/dialogs.rb:436 msgid "Saving Target for Kdump Image" msgstr "Kdump 이미지의 대상 저장" -#: src/include/kdump/dialogs.rb:443 src/include/kdump/dialogs.rb:444 +#: src/include/kdump/dialogs.rb:443 src/include/kdump/dialogs.rb:444 msgid "Dump Target" msgstr "덤프 대상" -#: src/include/kdump/dialogs.rb:450 +#: src/include/kdump/dialogs.rb:450 msgid "SMTP Server" msgstr "SMTP 서버" -#: src/include/kdump/dialogs.rb:460 +#: src/include/kdump/dialogs.rb:460 msgid "Notification Email Addresses" msgstr "알림 전자 메일 주소" -#: src/include/kdump/dialogs.rb:468 src/include/kdump/dialogs.rb:469 +#: src/include/kdump/dialogs.rb:468 src/include/kdump/dialogs.rb:469 msgid "Email Notification" msgstr "전자 메일 알림" -#: src/include/kdump/dialogs.rb:482 +#: src/include/kdump/dialogs.rb:482 msgid "Custom Kernel for Kdump" msgstr "Kdump의 사용자 정의 커널" -#: src/include/kdump/dialogs.rb:487 +#: src/include/kdump/dialogs.rb:487 msgid "Command Line" msgstr "명령줄" -#: src/include/kdump/dialogs.rb:495 +#: src/include/kdump/dialogs.rb:495 msgid "Dump Settings" msgstr "덤프 설정" -#: src/include/kdump/dialogs.rb:508 +#: src/include/kdump/dialogs.rb:508 msgid "Kdump Expert Settings" msgstr "Kdump 고급 설정" -#: src/include/kdump/dialogs.rb:509 +#: src/include/kdump/dialogs.rb:509 msgid "Expert Settings" msgstr "고급 설정" -#: src/include/kdump/dialogs.rb:529 +#: src/include/kdump/dialogs.rb:529 msgid "Kdump &Low Memory [MiB]" msgstr "Kdump 메모리 부족(&L)[MiB]" -#: src/include/kdump/dialogs.rb:531 +#: src/include/kdump/dialogs.rb:531 msgid "Kdump Memor&y [MiB]" msgstr "Kdump 메모리(&Y)[MiB]" -#: src/include/kdump/dialogs.rb:537 +#: src/include/kdump/dialogs.rb:537 msgid "Total System Memory [MiB]:" msgstr "총 시스템 메모리[MiB]:" -#: src/include/kdump/dialogs.rb:544 +#: src/include/kdump/dialogs.rb:544 msgid "Usable Memory [MiB]:" msgstr "사용 가능한 메모리[MiB]:" -#: src/include/kdump/dialogs.rb:567 +#: src/include/kdump/dialogs.rb:567 msgid "Kdump &High Memory [MiB]" msgstr "Kdump 상위 메모리(&H)[MiB]" -#. Enable/Disable Kdump - RadioButtons 1/1 -#: src/include/kdump/helps.rb:36 +#. Enable/Disable Kdump - RadioButtons 1/1 +#: src/include/kdump/helps.rb:36 msgid "" "<p><b>Enable/Disable Kdump</b><br>\n" -" Enable or disable kdump. The boot option crashkernel parameter is added/" -"removed. \n" +" Enable or disable kdump. The boot option crashkernel parameter is added/removed. \n" " To apply changes, a reboot is necessary.<br></p>\n" msgstr "" "<p><b>Kdump 활성화/비활성화</b><br>\n" -" kdump를 활성화하거나 비활성화합니다. 부트 옵션 crashkernel 파라미터가 추" -"가/제거되었습니다. \n" +" kdump를 활성화하거나 비활성화합니다. 부트 옵션 crashkernel 파라미터가 추가/제거되었습니다. \n" " 변경사항을 적용하려면 다시 부팅해야 합니다.<br></p>\n" -#. Kdump Memor&y [MB] - IntField 1/1 -#: src/include/kdump/helps.rb:42 +#. Kdump Memor&y [MB] - IntField 1/1 +#: src/include/kdump/helps.rb:42 msgid "" "<p><b>Kdump Memory</b><br>\n" " Allocation of memory for kdump kernel. <br></p>\n" @@ -771,27 +743,18 @@ "<p><b>Kdump 메모리</b><br>\n" " Kdump 커널을 위한 메모리 할당입니다. <br></p>\n" -#. T: help text for a combo box -#. description taken from http://lparbox.com/how-to/aix/19 -#: src/include/kdump/helps.rb:46 +#. T: help text for a combo box +#. description taken from http://lparbox.com/how-to/aix/19 +#: src/include/kdump/helps.rb:46 msgid "" "<p><b>Firmware-Assisted Dump</b><br>\n" -" Dumps are not generated before the partition is reinitialized but take " -"place when the partition is restarting. When performing a firmware-" -"assisted dump, system memory is frozen and the partition rebooted, which " -"allows a new instance of the operating system to dump data from the " -"previous kernel crash. This feature is suitable only when the system has " -"more than 1.5 GB of memory.</p>" +" Dumps are not generated before the partition is reinitialized but take place when the partition is restarting. When performing a firmware-assisted dump, system memory is frozen and the partition rebooted, which allows a new instance of the operating system to dump data from the previous kernel crash. This feature is suitable only when the system has more than 1.5 GB of memory.</p>" msgstr "" "<p><b>펌웨어 지원 덤프</b><br>\n" -" 덤프는 파티션이 다시 초기화되기 전에 생성되지 않고 파티션을 다시 시작할 " -"때 생성됩니다. 펌웨어 지원 덤프를 수행하는 경우 시스템 메모리가 고정되고 파티" -"션이 다시 부팅되므로 운영 체제의 새 인스턴스가 이전 커널 크래시의 데이터를 덤" -"프할 수 있습니다. 이 기능은 시스템에 1.5GB 이상의 메모리가 있는 경우에만 적합" -"합니다.</p>" +" 덤프는 파티션이 다시 초기화되기 전에 생성되지 않고 파티션을 다시 시작할 때 생성됩니다. 펌웨어 지원 덤프를 수행하는 경우 시스템 메모리가 고정되고 파티션이 다시 부팅되므로 운영 체제의 새 인스턴스가 이전 커널 크래시의 데이터를 덤프할 수 있습니다. 이 기능은 시스템에 1.5GB 이상의 메모리가 있는 경우에만 적합합니다.</p>" -#. Kdump Memor&y [MB] - IntField 1/1 -#: src/include/kdump/helps.rb:57 +#. Kdump Memor&y [MB] - IntField 1/1 +#: src/include/kdump/helps.rb:57 msgid "" "<p><b>Dump Level</b><br>\n" " Specify the type of necessary page for analysis.\n" @@ -803,73 +766,64 @@ " 지정한 유형의 페이지가 덤프 파일에 복사됩니다. \n" " 다음 테이블에 표시되어 있는 페이지 유형이 포함됩니다. <br></p>" -#. Dump Format - RadioButtons 1/1 -#: src/include/kdump/helps.rb:64 +#. Dump Format - RadioButtons 1/1 +#: src/include/kdump/helps.rb:64 msgid "" "<p><b>Dump Format</b><br>\n" " <i>No Dump</i> - Only save the kernel log.<br>\n" " <i>ELF Format</i> - Create dump file in the ELF format.<br>\n" -" <i>Compressed Format</i> - Compress dump data by each page with gzip." -"<br>\n" -" <i>LZO Compressed Format</i> - Slightly bigger files but much faster." -"<br>\n" +" <i>Compressed Format</i> - Compress dump data by each page with gzip.<br>\n" +" <i>LZO Compressed Format</i> - Slightly bigger files but much faster.<br>\n" "</p>" msgstr "" "<p><b>덤프 형식</b><br>\n" " <i>덤프 없음</i> - 커널 로그만 저장합니다.<br>\n" " <i>ELF 형식</i> - 덤프 파일을 ELF 형식으로 생성합니다.<br>\n" -" <i>압축 형식</i> - gzip을 사용하여 각 페이지 단위로 덤프 데이터를 압축합" -"니다.<br>\n" +" <i>압축 형식</i> - gzip을 사용하여 각 페이지 단위로 덤프 데이터를 압축합니다.<br>\n" " <i>LZO 압축 형식</i> - 파일 크기가 약간 더 크지만 훨씬 더 빠릅니다.<br>\n" "</p>" -#. Dump Format - RadioButtons 1/7 -#: src/include/kdump/helps.rb:72 +#. Dump Format - RadioButtons 1/7 +#: src/include/kdump/helps.rb:72 msgid "" "<p><b>Saving Target for Kdump Image</b><br>\n" -" The target for saving kdump images. Select type of target for saving " -"dumps.<br></p>" +" The target for saving kdump images. Select type of target for saving dumps.<br></p>" msgstr "" "<p><b>Kdump 이미지에 대해 저장 대상</b><br>\n" -" kdump 이미지를 저장하기 위한 대상입니다. 덤프를 저장하려면 대상 유형을 선" -"택하십시오.<br></p>" +" kdump 이미지를 저장하기 위한 대상입니다. 덤프를 저장하려면 대상 유형을 선택하십시오.<br></p>" -#. Dump Format - RadioButtons 2/7 -#: src/include/kdump/helps.rb:76 +#. Dump Format - RadioButtons 2/7 +#: src/include/kdump/helps.rb:76 msgid "" "<p><b>Local Filesystem</b> - Save kdump image in the local filesystem.\n" " <i>Directory for Saving Dumps</i> - The path for saving kdump images.\n" -" Selecting directory for saving kdump images via dialog by pressing " -"<i>Browse</i>\n" +" Selecting directory for saving kdump images via dialog by pressing <i>Browse</i>\n" " <br></p>" msgstr "" "<p><b>로컬 파일 시스템</b> - 로컬 파일 시스템에 kdump 이미지를 저장합니다.\n" " <i>덤프 저장 디렉토리</i> - kdump 이미지를 저장하기 위한 경로입니다.\n" -" <i>찾아보기</i>를 눌러 대화 상자에서 kdump 이미지를 저장하기 위한 디렉토" -"리를 선택합니다.\n" +" <i>찾아보기</i>를 눌러 대화 상자에서 kdump 이미지를 저장하기 위한 디렉토리를 선택합니다.\n" " <br></p>" -#. Dump Format - RadioButtons 3/7 -#: src/include/kdump/helps.rb:83 +#. Dump Format - RadioButtons 3/7 +#: src/include/kdump/helps.rb:83 msgid "" "<p><b>FTP</b> - Save kdump image via FTP.\n" " <i>Server Name</i> - The name of ftp server.\n" " <i>Port</i> - The port number for connection.\n" " <i>Directory on Server</i> - The path for saving kdump images.\n" " <i>Enable Anonymous FTP</i> enables anonymous connection to server.\n" -" <i>User Name</i> for ftp connection. <i>Password</i> for ftp connection." -"<br></p>" +" <i>User Name</i> for ftp connection. <i>Password</i> for ftp connection.<br></p>" msgstr "" "<p><b>FTP</b> - FTP를 통해 kdump 이미지를 저장합니다.\n" " <i>서버 이름</i> - FTP 서버의 이름입니다.\n" " <i>포트</i> - 연결을 위한 포트 번호입니다.\n" " <i>서버의 디렉토리</i> - kdump 이미지를 저장하기 위한 경로입니다.\n" " <i>익명 FTP 사용</i> - 서버에 대한 익명 연결을 활성화합니다.\n" -" <i>사용자 이름</i> - FTP 연결 이름입니다. <i>암호</i> - FTP 연결 암호입니" -"다.<br></p>" +" <i>사용자 이름</i> - FTP 연결 이름입니다. <i>암호</i> - FTP 연결 암호입니다.<br></p>" -#. Dump Format - RadioButtons 4/7 -#: src/include/kdump/helps.rb:92 +#. Dump Format - RadioButtons 4/7 +#: src/include/kdump/helps.rb:92 msgid "" "<p><b>SSH</b> - Save kdump image via SSH and 'dd' on target machine.\n" " <i>Server Name</i> - The name of server.\n" @@ -885,8 +839,8 @@ " <i>사용자 이름</i> - SSH 연결에 사용됩니다. \n" " <i>비밀번호</i> - SSH 연결에 사용됩니다.<br></p>\n" -#. Dump Format - RadioButtons 5/7 -#: src/include/kdump/helps.rb:101 +#. Dump Format - RadioButtons 5/7 +#: src/include/kdump/helps.rb:101 msgid "" "<p><b>SFTP</b> - Save kdump image via SFTP.\n" " <i>Server Name</i> - The name of server.\n" @@ -902,7 +856,7 @@ " <i>사용자 이름</i> - SSH 연결에 사용됩니다. \n" " <i>비밀번호</i> - SSH 연결에 사용됩니다.<br></p>\n" -#: src/include/kdump/helps.rb:109 +#: src/include/kdump/helps.rb:109 msgid "" "<p>The choice between SSH and SFTP depends\n" "on details of server configuration. SLE servers support both\n" @@ -912,8 +866,8 @@ "달라집니다. SLE 서버는 기본적으로 둘 다 지원합니다.\n" "</p>" -#. Dump Format - RadioButtons 6/7 -#: src/include/kdump/helps.rb:115 +#. Dump Format - RadioButtons 6/7 +#: src/include/kdump/helps.rb:115 msgid "" "<p><b>NFS</b> - Save kdump image on NFS.\n" " <i>Server Name</i> - The name of nfs server.\n" @@ -923,8 +877,8 @@ " <i>서버 이름</i> - NFS 서버의 이름입니다.\n" " <i>서버의 디렉토리</i> - kdump 이미지를 저장하기 위한 경로입니다.<br></p>" -#. Dump Format - RadioButtons 7/7 -#: src/include/kdump/helps.rb:121 +#. Dump Format - RadioButtons 7/7 +#: src/include/kdump/helps.rb:121 msgid "" "<p><b>CIFS</b> - Save kdump image via CIFS.\n" " <i>Server Name</i> - The name of server.\n" @@ -938,23 +892,21 @@ " <i>내보낸 공유</i> - Windows 공유 이름입니다.\n" " <i>서버의 디렉토리</i> - kdump 이미지를 저장하기 위한 경로입니다.\n" " <i>인증 사용</i> - 서버에 대한 인증된 연결을 활성화합니다.\n" -" <i>사용자 이름</i> - 연결에 사용됩니다. <i>암호</i> - 연결에 사용됩니다." -"<br></p>" +" <i>사용자 이름</i> - 연결에 사용됩니다. <i>암호</i> - 연결에 사용됩니다.<br></p>" -#. Custom Kdump Kernel - TextEntry 1/1 -#: src/include/kdump/helps.rb:130 +#. Custom Kdump Kernel - TextEntry 1/1 +#: src/include/kdump/helps.rb:130 msgid "" "<p><b>Custom Kdump Kernel</b> The user can enter the custom kernel.\n" " The naming scheme is:<i>/boot/vmlinu[zx]-[.gz]</i>\n" " Please enter only <i>kernel_string</i>.<br></p>" msgstr "" -"<p><b>사용자 정의 Kdump 커널</b> 사용자가 사용자 정의 커널을 입력할 수 있습니" -"다.\n" +"<p><b>사용자 정의 Kdump 커널</b> 사용자가 사용자 정의 커널을 입력할 수 있습니다.\n" " 명명 스키마:<i>/boot/vmlinu[zx]-[.gz]</i>\n" " <i>kernel_string</i>만 입력하십시오.<br></p>" -#. Kdump Command Line - TextEntry 1/1 -#: src/include/kdump/helps.rb:136 +#. Kdump Command Line - TextEntry 1/1 +#: src/include/kdump/helps.rb:136 msgid "" "<p><b>Kdump Command Line</b>\n" " Additional arguments passed to kexec. <br></p>" @@ -962,8 +914,8 @@ "<p><b>Kdump 명령줄</b>\n" " kexec에 전달된 추가 인수입니다.<br></p>" -#. Kdump Command Line Append - TextEntry 1/1 -#: src/include/kdump/helps.rb:140 +#. Kdump Command Line Append - TextEntry 1/1 +#: src/include/kdump/helps.rb:140 msgid "" "<p><b>Kdump Command Line Append</b>\n" " Set this option to _append_ values to the default command line string. \n" @@ -975,8 +927,8 @@ " <i>Kdump Command Line</i>이 설정된 경우\n" " 문자열이 추가됩니다. <br></p>\n" -#. Enable Immediate Reboot After Saving the Core - CheckBox 1/1 -#: src/include/kdump/helps.rb:147 +#. Enable Immediate Reboot After Saving the Core - CheckBox 1/1 +#: src/include/kdump/helps.rb:147 msgid "" "<p><b>Enable Immediate Reboot After Saving the Core</b> - \n" " Enable immediately reboot after saving the core in the kdump.<br></p>" @@ -984,20 +936,19 @@ "<p><b>코어 저장 후 즉시 재부팅 활성화</b> - \n" " kdump에 코어를 저장한 후 즉시 재부팅할 수 있습니다.<br></p>" -#. Enable Delete Old Dump Images - CheckBox 1/1 -#: src/include/kdump/helps.rb:151 +#. Enable Delete Old Dump Images - CheckBox 1/1 +#: src/include/kdump/helps.rb:151 msgid "" "<p><b>Enable Delete Old Dump Images</b> - \n" " Enable Delete Old Dump Images. If the number of dump files in \n" -" <i>Number of Old Dumps</i> exceeds this number, older dumps are removed." -"<br></p>" +" <i>Number of Old Dumps</i> exceeds this number, older dumps are removed.<br></p>" msgstr "" "<p><b>이전 덤프 이미지 삭제 활성화</b> - \n" " 이전 덤프 이미지 삭제를 활성화합니다. <i>이전 덤프 수</i>의 덤프 \n" "파일 수가 이 숫자를 초과할 경우, 더 오래된 덤프가 제거됩니다.<br></p>" -#. Enable Copy Ke&rnel into the Dump Directory - CheckBox 1/1 -#: src/include/kdump/helps.rb:157 +#. Enable Copy Ke&rnel into the Dump Directory - CheckBox 1/1 +#: src/include/kdump/helps.rb:157 msgid "" "<p><b>Enable Copy Kernel into the Dump Directory</b> - \n" " If this option is selected, the kernel and the\n" @@ -1011,68 +962,52 @@ " 복사됩니다. 기본값은 \"꺼짐\"입니다. 디버깅을 위해\n" " 모든 항목을 제자리에 배치하는 것이 유용합니다.<br></p>\n" -#. SMTP Server -#: src/include/kdump/helps.rb:165 -msgid "" -"<p><b>SMTP Server</b> used for sending a notification email after a dump.</p>" +#. SMTP Server +#: src/include/kdump/helps.rb:165 +msgid "<p><b>SMTP Server</b> used for sending a notification email after a dump.</p>" msgstr "<p><b>SMTP 서버</b> 덤프 후 알림 전자 메일을 보내는 데 사용됩니다.</p>" -#. SMTP User Name -#: src/include/kdump/helps.rb:169 +#. SMTP User Name +#: src/include/kdump/helps.rb:169 msgid "" "<p><b>User Name</b> for SMTP authentication when <i>SMTP Server</i> is\n" -" set. This is optional. If you do not specifiy a username and password, " -"plain SMTP will be used.</p>\n" +" set. This is optional. If you do not specifiy a username and password, plain SMTP will be used.</p>\n" msgstr "" "<p><b>사용자 이름</b>은 <i>SMTP 서버</i>가 설정된 경우 SMTP 인증에\n" -" 사용됩니다. 이는 선택 사항입니다. 사용자 이름과 비밀번호를 지정하지 않으면 " -"일반 SMTP가 사용됩니다.</p>\n" +" 사용됩니다. 이는 선택 사항입니다. 사용자 이름과 비밀번호를 지정하지 않으면 일반 SMTP가 사용됩니다.</p>\n" -#. SMTP Password -#: src/include/kdump/helps.rb:173 +#. SMTP Password +#: src/include/kdump/helps.rb:173 msgid "" -"<p><b>Password</b> for SMTP authentication when <i>SMTP Server</i> is set. " -"This\n" -" is optional. If you do not specify a username and password, plain SMTP " -"will be used.</p>\n" +"<p><b>Password</b> for SMTP authentication when <i>SMTP Server</i> is set. This\n" +" is optional. If you do not specify a username and password, plain SMTP will be used.</p>\n" msgstr "" "<p><b>비밀번호</b>는 <i>SMTP 서버</i>가 설정된 경우 SMTP 인증에 사용됩니다.\n" -"이는 선택 사항입니다. 사용자 이름과 비밀번호를 지정하지 않으면 일반 SMTP가 사" -"용됩니다.</p>\n" +"이는 선택 사항입니다. 사용자 이름과 비밀번호를 지정하지 않으면 일반 SMTP가 사용됩니다.</p>\n" -#. Notification To (email addresses) -#: src/include/kdump/helps.rb:177 -msgid "" -"<p><b>Notification To</b> Specify the email address to which a notification " -"email will be sent when a dump has been saved.</p>\n" -msgstr "" -"<p><b>알림 대상</b> 덤프가 저장된 경우 알림 전자 메일을 보낼 전자 메일 주소" -"를 지정합니다.</p>\n" +#. Notification To (email addresses) +#: src/include/kdump/helps.rb:177 +msgid "<p><b>Notification To</b> Specify the email address to which a notification email will be sent when a dump has been saved.</p>\n" +msgstr "<p><b>알림 대상</b> 덤프가 저장된 경우 알림 전자 메일을 보낼 전자 메일 주소를 지정합니다.</p>\n" -#. Notification CC (email addresses) -#: src/include/kdump/helps.rb:181 +#. Notification CC (email addresses) +#: src/include/kdump/helps.rb:181 msgid "" -"<p><b>Notification CC</b> Specify a list of space-separated email addresses " -"to\n" -" which a notification email will be sent via cc if a dump has been saved.\n" -msgstr "" -"<p><b>알림 참조</b> 덤프가 저장된 경우 참조를 통해 알림 전자 메일을 보낼 전" -"자 메일 주소의 공백으로 구분된 목록을 지정합니다.</p>\n" +"<p><b>Notification CC</b> Specify a list of space-separated email addresses to\n" +" which a notification email will be sent via cc if a dump has been saved.</p>\n" +msgstr "<p><b>알림 참조</b> 덤프가 저장된 경우 참조를 통해 알림 전자 메일을 보낼 전자 메일 주소의 공백으로 구분된 목록을 지정합니다.</p>\n" -#. Number of Old Dumps (number) -#: src/include/kdump/helps.rb:185 +#. Number of Old Dumps (number) +#: src/include/kdump/helps.rb:185 msgid "" -"<p><b>Number of Old Dumps</b> specifies how many old dumps are kept. If the " -"number of dump files \n" +"<p><b>Number of Old Dumps</b> specifies how many old dumps are kept. If the number of dump files \n" "exceeds this number, older dumps are removed.</p>" msgstr "" -"<p><b>이전 덤프 수</b>는 보관된 이전 덤프 수를 지정합니다. 덤프 파일 수가 이 " -"숫자를 초과하면\n" +"<p><b>이전 덤프 수</b>는 보관된 이전 덤프 수를 지정합니다. 덤프 파일 수가 이 숫자를 초과하면\n" "이전 덤프가 제거됩니다.</p>" -#. Read dialog help 1/2 -#: src/include/kdump/helps.rb:189 +#. Read dialog help 1/2 +#: src/include/kdump/helps.rb:189 msgid "" "<p><b><big>Initializing Kdump Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -1080,8 +1015,8 @@ "<p><b><big>Kdump 구성 초기화</big></b><br>\n" "잠시 기다려주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/kdump/helps.rb:193 +#. Read dialog help 2/2 +#: src/include/kdump/helps.rb:193 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -1089,8 +1024,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/kdump/helps.rb:197 +#. Write dialog help 1/2 +#: src/include/kdump/helps.rb:197 msgid "" "<p><b><big>Saving Kdump Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -1098,8 +1033,8 @@ "<p><b><big>Kdump 구성 저장</big></b><br>\n" "잠시 기다려주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/kdump/helps.rb:201 +#. Write dialog help 2/2 +#: src/include/kdump/helps.rb:201 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -1111,8 +1046,8 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Summary dialog help 1/3 -#: src/include/kdump/helps.rb:208 +#. Summary dialog help 1/3 +#: src/include/kdump/helps.rb:208 msgid "" "<p><b><big>Kdump Configuration</big></b><br>\n" "Configure kdump here.<br></p>\n" @@ -1120,8 +1055,8 @@ "<p><b><big>Kdump 구성</big></b><br>\n" "여기에 kdump를 구성합니다.<br></p>\n" -#. Summary dialog help 2/3 -#: src/include/kdump/helps.rb:212 +#. Summary dialog help 2/3 +#: src/include/kdump/helps.rb:212 msgid "" "<p><b><big>Adding a Kdump:</big></b><br>\n" "Choose an kdump from the list of detected kdumps.\n" @@ -1133,8 +1068,8 @@ "Kdump가 검색되지 않은 경우 <b>기타(검색되지 않음)</b>를 선택합니다.\n" "그런 다음 <b>구성</b>을 누릅니다.</p>\n" -#. Summary dialog help 3/3 -#: src/include/kdump/helps.rb:219 +#. Summary dialog help 3/3 +#: src/include/kdump/helps.rb:219 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -1144,8 +1079,8 @@ "<b>편집</b>을 누르면 구성을 변경할 수 있는 대화 상자가\n" "추가로 열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/kdump/helps.rb:225 +#. Ovreview dialog help 1/3 +#: src/include/kdump/helps.rb:225 msgid "" "<p><b><big>Kdump Configuration Overview</big></b><br>\n" "Obtain an overview of installed kdumps. Additionally\n" @@ -1155,8 +1090,8 @@ "설치된 kdump의 개요를 가져옵니다. 그런 다음\n" "해당 구성을 편집하십시오.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/kdump/helps.rb:231 +#. Ovreview dialog help 2/3 +#: src/include/kdump/helps.rb:231 msgid "" "<p><b><big>Adding a Kdump:</big></b><br>\n" "Press <b>Add</b> to configure a kdump.</p>" @@ -1164,8 +1099,8 @@ "<p><b><big>Kdump 추가:</big></b><br>\n" "Kdump를 구성하려면 <b>추가</b>를 누릅니다.</p>" -#. Ovreview dialog help 3/3 -#: src/include/kdump/helps.rb:235 +#. Ovreview dialog help 3/3 +#: src/include/kdump/helps.rb:235 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "Choose a kdump to change or remove.\n" @@ -1175,102 +1110,102 @@ "변경하거나 제거할 kdump를 선택합니다.\n" "그런 다음 원하는 대로 <b>편집</b> 또는 <b>삭제</b>를 누릅니다.</p>\n" -#. definition UI terms for saveing dump target -#. -#. terms -#: src/include/kdump/uifunctions.rb:85 +#. definition UI terms for saveing dump target +#. +#. terms +#: src/include/kdump/uifunctions.rb:85 msgid "Local Filesystem" msgstr "로컬 파일 시스템" -#: src/include/kdump/uifunctions.rb:91 +#: src/include/kdump/uifunctions.rb:91 msgid "&Directory for Saving Dumps" msgstr "덤프 저장 디렉토리(&D)" -#: src/include/kdump/uifunctions.rb:94 +#: src/include/kdump/uifunctions.rb:94 msgid "B&rowse" msgstr "찾아보기(&R)" -#: src/include/kdump/uifunctions.rb:112 src/include/kdump/uifunctions.rb:149 -#: src/include/kdump/uifunctions.rb:177 src/include/kdump/uifunctions.rb:192 +#: src/include/kdump/uifunctions.rb:112 src/include/kdump/uifunctions.rb:149 +#: src/include/kdump/uifunctions.rb:177 src/include/kdump/uifunctions.rb:192 msgid "Server Nam&e" msgstr "서버 이름(&E)" -#: src/include/kdump/uifunctions.rb:114 src/include/kdump/uifunctions.rb:151 +#: src/include/kdump/uifunctions.rb:114 src/include/kdump/uifunctions.rb:151 msgid "P&ort" msgstr "포트(&O)" -#. text entry -#. text entry -#: src/include/kdump/uifunctions.rb:119 src/include/kdump/uifunctions.rb:155 -#: src/include/kdump/uifunctions.rb:179 src/include/kdump/uifunctions.rb:198 +#. text entry +#. text entry +#: src/include/kdump/uifunctions.rb:119 src/include/kdump/uifunctions.rb:155 +#: src/include/kdump/uifunctions.rb:179 src/include/kdump/uifunctions.rb:198 msgid "&Directory on Server" msgstr "서버의 디렉토리(&D)" -#: src/include/kdump/uifunctions.rb:124 +#: src/include/kdump/uifunctions.rb:124 msgid "Enable Anon&ymous FTP" msgstr "익명 FTP 사용(&Y)" -#: src/include/kdump/uifunctions.rb:143 +#: src/include/kdump/uifunctions.rb:143 msgid "SSH / SFTP" msgstr "SSH / SFTP" -#. text entries -#: src/include/kdump/uifunctions.rb:196 +#. text entries +#: src/include/kdump/uifunctions.rb:196 msgid "Exported Sha&re" msgstr "내보낸 공유(&R)" -#: src/include/kdump/uifunctions.rb:205 +#: src/include/kdump/uifunctions.rb:205 msgid "Use Aut&hentication" msgstr "인증 사용(&H)" -#. Function validates options in -#. "Saving Target for Kdump Image" -#: src/include/kdump/uifunctions.rb:661 +#. Function validates options in +#. "Saving Target for Kdump Image" +#: src/include/kdump/uifunctions.rb:661 msgid "You need to specify \"Directory for Saving Dumps\"" msgstr "\"덤프 저장 디렉토리\"를 지정해야 합니다." -#. install cifs-mount package -#: src/include/kdump/uifunctions.rb:669 src/include/kdump/uifunctions.rb:695 -#: src/include/kdump/uifunctions.rb:729 +#. install cifs-mount package +#: src/include/kdump/uifunctions.rb:669 src/include/kdump/uifunctions.rb:695 +#: src/include/kdump/uifunctions.rb:729 msgid "You need to specify \"Server Name\"" msgstr "\"서버 이름\"을 지정해야 합니다." -#: src/include/kdump/uifunctions.rb:676 src/include/kdump/uifunctions.rb:702 -#: src/include/kdump/uifunctions.rb:736 +#: src/include/kdump/uifunctions.rb:676 src/include/kdump/uifunctions.rb:702 +#: src/include/kdump/uifunctions.rb:736 msgid "You need to specify \"Directory on Server\"" msgstr "\"서버의 디렉토리\"를 지정해야 합니다." -#: src/include/kdump/uifunctions.rb:686 src/include/kdump/uifunctions.rb:753 +#: src/include/kdump/uifunctions.rb:686 src/include/kdump/uifunctions.rb:753 msgid "You need to specify \"User Name\"" msgstr "\"사용자 이름\"을 지정해야 합니다." -#: src/include/kdump/uifunctions.rb:743 +#: src/include/kdump/uifunctions.rb:743 msgid "You need to specify \"Exported Share\"" msgstr "\"내보낸 공유\"를 지정해야 합니다." -#. KDUMP_SAVE_TARGET["user_name"]=""; -#. KDUMP_SAVE_TARGET["password"]=""; -#: src/include/kdump/uifunctions.rb:794 +#. KDUMP_SAVE_TARGET["user_name"]=""; +#. KDUMP_SAVE_TARGET["password"]=""; +#: src/include/kdump/uifunctions.rb:794 msgid "Select directory for saving dump images" msgstr "덤프 이미지를 저장할 디렉토리를 선택합니다." -#. Function validates if crashkernel option includes -#. several ranges and ask user about rewritting -#. -#. "KdumpMemory" -#: src/include/kdump/uifunctions.rb:1454 +#. Function validates if crashkernel option includes +#. several ranges and ask user about rewritting +#. +#. "KdumpMemory" +#: src/include/kdump/uifunctions.rb:1454 msgid "Kernel option includes several ranges or redundant values. Rewrite it?" msgstr "커널 옵션에 범위 또는 중복 값이 포함되어 있습니다. 다시 쓰시겠습니까?" -#. T: Checkbox label -#: src/include/kdump/uifunctions.rb:1487 +#. T: Checkbox label +#: src/include/kdump/uifunctions.rb:1487 msgid "Use &Firmware-Assisted Dump" msgstr "펌웨어 지원 덤프 사용(&F)" -#. Function validates options in -#. "Dump Format" -#. install makedumpfile if KDUMP_DUMPFORMAT == "compressed" -#: src/include/kdump/uifunctions.rb:1849 +#. Function validates options in +#. "Dump Format" +#. install makedumpfile if KDUMP_DUMPFORMAT == "compressed" +#: src/include/kdump/uifunctions.rb:1849 msgid "" "Kdump is not supported on this system.\n" "If you continue now, the module may not function properly.\n" @@ -1282,18 +1217,18 @@ "예를 들어 일부 설정을 올바로 읽지 않고\n" "결과 구성을 사용할 수 없게 될 수 있습니다.\n" -#: src/include/kdump/uifunctions.rb:1855 +#: src/include/kdump/uifunctions.rb:1855 msgid "Kdump not supported" msgstr "Kdump가 지원되지 않습니다." -#. progress step title -#: src/lib/kdump/clients/finish.rb:31 +#. progress step title +#: src/lib/kdump/clients/finish.rb:31 msgid "Saving kdump configuration..." msgstr "Kdump 구성 저장 중..." -#. @param update_command [String] a command for .target.bash -#. @return [Boolean] whether successful -#: src/modules/Kdump.rb:414 +#. @param update_command [String] a command for .target.bash +#. @return [Boolean] whether successful +#: src/modules/Kdump.rb:414 msgid "" "Error updating initrd while calling '%{cmd}'.\n" "See %{log} for details." @@ -1301,134 +1236,130 @@ "'%{cmd}'을(를) 호출하는 중 initrd 업데이트에서 오류가 발생했습니다.\n" "자세한 내용은 %{log}을(를) 참조하십시오." -#. Kdump read dialog caption -#: src/modules/Kdump.rb:523 +#. Kdump read dialog caption +#: src/modules/Kdump.rb:523 msgid "Initializing kdump Configuration" msgstr "kdump 구성 초기화 중" -#. Progress stage 1/4 -#. Progress step 1/4 -#: src/modules/Kdump.rb:532 src/modules/Kdump.rb:540 +#. Progress stage 1/4 +#. Progress step 1/4 +#: src/modules/Kdump.rb:532 src/modules/Kdump.rb:540 msgid "Reading the config file..." msgstr "구성 파일을 읽는 중..." -#. Progress stage 3/4 -#: src/modules/Kdump.rb:534 +#. Progress stage 3/4 +#: src/modules/Kdump.rb:534 msgid "Reading kernel boot options..." msgstr "커널 부트 옵션을 읽는 중..." -#. Progress stage 4/4 -#: src/modules/Kdump.rb:536 +#. Progress stage 4/4 +#: src/modules/Kdump.rb:536 msgid "Calculating memory limits..." msgstr "메모리 제한을 계산하는 중..." -#. Progress step 2/4 -#: src/modules/Kdump.rb:542 +#. Progress step 2/4 +#: src/modules/Kdump.rb:542 msgid "Reading partitions of disks..." msgstr "디스크의 파티션을 읽는 중..." -#. Progress finished 3/4 -#: src/modules/Kdump.rb:544 +#. Progress finished 3/4 +#: src/modules/Kdump.rb:544 msgid "Reading available memory and calibrating usage..." msgstr "사용 가능한 메모리를 읽고 사용량을 보정하는 중..." -#. Error message -#: src/modules/Kdump.rb:556 +#. Error message +#: src/modules/Kdump.rb:556 msgid "Cannot read config file /etc/sysconfig/kdump" msgstr "/etc/sysconfig/kdump 구성 파일을 읽을 수 없음" -#. Error message -#: src/modules/Kdump.rb:564 +#. Error message +#: src/modules/Kdump.rb:564 msgid "Cannot read kernel boot options." msgstr "커널 부트 옵션을 읽을 수 없습니다." -#. Error message -#: src/modules/Kdump.rb:572 +#. Error message +#: src/modules/Kdump.rb:572 msgid "Cannot read available memory." msgstr "사용 가능한 메모리를 읽을 수 없습니다." -#. Kdump read dialog caption -#: src/modules/Kdump.rb:598 +#. Kdump read dialog caption +#: src/modules/Kdump.rb:598 msgid "Saving kdump Configuration" msgstr "kdump 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/Kdump.rb:627 +#. Progress stage 1/2 +#: src/modules/Kdump.rb:627 msgid "Write the settings" msgstr "설정 기록" -#. Progress stage 2/2 -#: src/modules/Kdump.rb:629 +#. Progress stage 2/2 +#: src/modules/Kdump.rb:629 msgid "Update boot options" msgstr "부트 옵션 업데이트" -#. Progress step 1/2 -#: src/modules/Kdump.rb:633 +#. Progress step 1/2 +#: src/modules/Kdump.rb:633 msgid "Writing the settings..." msgstr "설정을 기록하는 중..." -#. Progress step 2/2 -#: src/modules/Kdump.rb:635 +#. Progress step 2/2 +#: src/modules/Kdump.rb:635 msgid "Updating boot options..." msgstr "부트 옵션 업데이트 중..." -#. Progress finished -#: src/modules/Kdump.rb:637 +#. Progress finished +#: src/modules/Kdump.rb:637 msgid "Finished" msgstr "완료됨" -#. Error message -#: src/modules/Kdump.rb:647 +#. Error message +#: src/modules/Kdump.rb:647 msgid "Cannot write settings." msgstr "설정을 기록할 수 없습니다." -#. Error message -#: src/modules/Kdump.rb:656 +#. Error message +#: src/modules/Kdump.rb:656 msgid "Adding crashkernel parameter to bootloader fault." msgstr "부트 로더 오류에 crashkernel 매개 변수 추가 중." -#. Create a textual summary -#. @return summary of the current configuration -#: src/modules/Kdump.rb:774 +#. Create a textual summary +#. @return summary of the current configuration +#: src/modules/Kdump.rb:774 msgid "Kdump status: %1" msgstr "Kdump 상태: %1" -#: src/modules/Kdump.rb:775 +#: src/modules/Kdump.rb:775 msgid "enabled" msgstr "활성화" -#: src/modules/Kdump.rb:775 +#: src/modules/Kdump.rb:775 msgid "disabled" msgstr "비활성화" -#: src/modules/Kdump.rb:782 +#: src/modules/Kdump.rb:782 msgid "Value(s) of crashkernel option: %1" msgstr "crashkernel 옵션 값: %1" -#: src/modules/Kdump.rb:789 +#: src/modules/Kdump.rb:789 msgid "Dump format: %1" msgstr "덤프 형식: %1" -#: src/modules/Kdump.rb:796 +#: src/modules/Kdump.rb:796 msgid "Target of dumps: %1" msgstr "덤프 대상: %1" -#: src/modules/Kdump.rb:803 +#: src/modules/Kdump.rb:803 msgid "Number of dumps: %1" msgstr "덤프 수: %1" -#. TRANSLATORS: warning message in installation proposal, -#. do not translate %{requested} and %{available} - they are replaced with actual sizes later -#: src/modules/Kdump.rb:895 -msgid "" -"Warning! There might not be enough free space. %{required} required, but " -"only %{available} are available." -msgstr "" -"경고! 사용 가능한 공간이 부족할 수 있습니다. %{required}의 공간이 필요하나 현" -"재 %{available}밖에 없습니다." +#. TRANSLATORS: warning message in installation proposal, +#. do not translate %{requested} and %{available} - they are replaced with actual sizes later +#: src/modules/Kdump.rb:895 +msgid "Warning! There might not be enough free space. %{required} required, but only %{available} are available." +msgstr "경고! 사용 가능한 공간이 부족할 수 있습니다. %{required}의 공간이 필요하나 현재 %{available}밖에 없습니다." -#. Trying to use fadump on unsupported hardware -#: src/modules/Kdump.rb:992 +#. Trying to use fadump on unsupported hardware +#: src/modules/Kdump.rb:992 msgid "" "Cannot use Firmware-assisted dump.\n" "It is not supported on this hardware." Modified: branches/SLE12-SP3/yast/ko/po/languages_db.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/languages_db.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/languages_db.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -5,7 +5,7 @@ msgstr "" "Project-Id-Version: languages_db\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2016-09-09 15:04+0200\n" +"POT-Creation-Date: 2016-08-30 18:27+0200\n" "PO-Revision-Date: 2016-09-19 13:48\n" "Last-Translator: Novell language \n" "Language-Team: Novell language \n" Modified: branches/SLE12-SP3/yast/ko/po/ldap-client.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ldap-client.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ldap-client.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,18 +14,18 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. popup text -#: src/ui.rb:88 +#. popup text +#: src/ui.rb:88 msgid "Really abort the writing process?" msgstr "정말 기록을 중단하시겠습니까?" -#. help text -#: src/ui.rb:96 +#. help text +#: src/ui.rb:96 msgid "Writing LDAP Client Settings" msgstr "LDAP 클라이언트 설정 기록" -#. yes/no popup -#: src/ui.rb:144 +#. yes/no popup +#: src/ui.rb:144 msgid "" "If you reread settings from the server,\n" "all changes will be lost. Really reread?\n" @@ -33,8 +33,8 @@ "서버에서 설정을 다시 읽어 오면\n" "모든 변경 내용을 잃게 됩니다. 정말로 다시 읽어 오시겠습니까?\n" -#. help text 1/3 -#: src/ui.rb:168 +#. help text 1/3 +#: src/ui.rb:168 msgid "" "<p>Configure the template used for creating \n" "new objects (like users or groups).</p>\n" @@ -42,8 +42,8 @@ "<p>새 객체(사용자 또는 그룹)를 생성하는 데 \n" "사용되는 템플릿을 구성하십시오.</p>\n" -#. help text 2/3 -#: src/ui.rb:172 +#. help text 2/3 +#: src/ui.rb:172 msgid "" "<p>Edit the template attribute values with <b>Edit</b>.\n" "Changing the <b>cn</b> value renames the template.</p>\n" @@ -51,8 +51,8 @@ "<p><b>편집</b>으로 템플리트 속성 값들을 수정 하십시오.\n" "그 <b>cn</b> 값은 그 템플리트 이름으로 변경됩니다.</p>\n" -#. help text 3/3 -#: src/ui.rb:176 +#. help text 3/3 +#: src/ui.rb:176 msgid "" "<p>The second table contains a list of <b>default values</b> used\n" "for new objects. Modify the list by adding new values, editing or\n" @@ -62,56 +62,56 @@ "목록이 포함되어 있습니다. 새 값을 추가하거나 현재 값을 편집 또는 제거하여\n" "목록을 수정하십시오.</p>\n" -#. table header 1/2 -#. table header 1/2 -#: src/ui.rb:245 src/ui.rb:580 +#. table header 1/2 +#. table header 1/2 +#: src/ui.rb:245 src/ui.rb:580 msgid "Attribute" msgstr "속성" -#. table header 2/2 -#. table header 2/2 -#: src/ui.rb:247 src/ui.rb:582 +#. table header 2/2 +#. table header 2/2 +#: src/ui.rb:247 src/ui.rb:582 msgid "Value" msgstr "값" -#. label (table folows) -#: src/ui.rb:253 +#. label (table folows) +#: src/ui.rb:253 msgid "Default Values for New Objects" msgstr "새로운 객체들을 위한 디폴트 값들" -#. table header 1/2 -#: src/ui.rb:259 +#. table header 1/2 +#: src/ui.rb:259 msgid "Attribute of Object" msgstr "객체의 속성" -#. table header 2/2 -#: src/ui.rb:261 +#. table header 2/2 +#: src/ui.rb:261 msgid "Default Value" msgstr "디폴트 값" -#. button label (with non-default shortcut) -#: src/ui.rb:267 +#. button label (with non-default shortcut) +#: src/ui.rb:267 msgid "A&dd" msgstr "추가(&A)" -#. button label -#: src/ui.rb:269 +#. button label +#: src/ui.rb:269 msgid "&Edit" msgstr "편집(&E)" -#. dialog label -#: src/ui.rb:281 +#. dialog label +#: src/ui.rb:281 msgid "Object Template Configuration" msgstr "템플리트 설정 객체" -#. yes/no popup, %1 is name -#: src/ui.rb:384 +#. yes/no popup, %1 is name +#: src/ui.rb:384 msgid "Really delete default attribute \"%1\"?" msgstr "정말로 \"%1\" 디폴트 속성을 삭제하시겠습니까?" -#. error popup, %1 is attribute name -#. error popup, %1 is attribute name -#: src/ui.rb:417 src/ui.rb:636 +#. error popup, %1 is attribute name +#. error popup, %1 is attribute name +#: src/ui.rb:417 src/ui.rb:636 msgid "" "The \"%1\" attribute is mandatory.\n" "Enter a value." @@ -119,13 +119,13 @@ "\"%1\"은(는) 필수 특성입니다.\n" "값을 입력하십시오." -#. helptext 1/4 -#: src/ui.rb:438 +#. helptext 1/4 +#: src/ui.rb:438 msgid "<p>Manage the configuration stored in the LDAP directory.</p>" msgstr "<p>LDAP 디렉토리에 저장된 구성을 관리하십시오.</p>" -#. helptext 2/4 -#: src/ui.rb:442 +#. helptext 2/4 +#: src/ui.rb:442 msgid "" "<p>Each configuration set is called a \"configuration module.\" If there\n" "is no configuration module in the provided location (base configuration),\n" @@ -137,21 +137,19 @@ " 새로 만듭니다. 현재 모듈을 삭제하려면\n" " <b>삭제</b>를 사용합니다.</p>\n" -#. helptext 3/4 -#: src/ui.rb:449 +#. helptext 3/4 +#: src/ui.rb:449 msgid "" "<p>Edit the values of attributes in the table with <b>Edit</b>.\n" -"Some values have special meanings, for example, changing the <b>cn</b> value " -"renames the\n" +"Some values have special meanings, for example, changing the <b>cn</b> value renames the\n" "current module.</p>\n" msgstr "" "<p>테이블안에 <b>편집</b>을 사용하여 속성들의 값을 편집 하십시오.\n" -"몇몇의 값들은 특별한 의미를 가지고 있습니다. 예를 들어, 변경중인 <b>cn</b>값" -"은 현재 모듈로 \n" +"몇몇의 값들은 특별한 의미를 가지고 있습니다. 예를 들어, 변경중인 <b>cn</b>값은 현재 모듈로 \n" "이름이 바뀝니다.</p>\n" -#. helptext 4/4 -#: src/ui.rb:455 +#. helptext 4/4 +#: src/ui.rb:455 msgid "" "<p>To configure the default template of the current module,\n" "click <b>Configure Template</b>.\n" @@ -161,17 +159,17 @@ "<b>설정 템플리트</b>을 클릭 하십시오.\n" "</p>\n" -#. combobox label -#: src/ui.rb:535 +#. combobox label +#: src/ui.rb:535 msgid "Configuration &Module" msgstr "모듈 설정(&M)" -#. button label -#: src/ui.rb:559 +#. button label +#: src/ui.rb:559 msgid "C&onfigure Template" msgstr "템플릿 구성(&O)" -#. dialog label -#: src/ui.rb:598 +#. dialog label +#: src/ui.rb:598 msgid "Module Configuration" msgstr "모듈 설정" Modified: branches/SLE12-SP3/yast/ko/po/ldap.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ldap.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ldap.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,23 +14,22 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. hint to error message -#: src/Ldap.rb:252 +#. hint to error message +#: src/Ldap.rb:252 msgid "Verify that the LDAP Server is running and reachable." msgstr "LDAP 서버가 실행 중이고 접근 가능함을 확인하십시오." -#. hint to error message -#: src/Ldap.rb:256 +#. hint to error message +#: src/Ldap.rb:256 msgid "" "Failed to establish TLS encryption.\n" -"Verify that the correct CA Certificate is installed and the Server " -"Certificate is valid." +"Verify that the correct CA Certificate is installed and the Server Certificate is valid." msgstr "" "TLS 암호화를 설정하지 못했습니다.\n" "올바른 CA 인증서가 설치되고 서버 인증서가 유효함을 확인하십시오." -#. hint to error message -#: src/Ldap.rb:260 +#. hint to error message +#: src/Ldap.rb:260 msgid "" "Failed to establish TLS encryption.\n" "Verify that the Server has StartTLS support enabled." @@ -38,8 +37,8 @@ "TLS 암호화를 설정하지 못했습니다.\n" "서버에서 StartTLS 지원을 활성화했음을 확인하십시오." -#. error message: -#: src/Ldap.rb:530 +#. error message: +#: src/Ldap.rb:530 msgid "" "\n" "The server could be down or unreachable.\n" @@ -47,8 +46,8 @@ "\n" "서버가 다운되었거나 접근할 수 없습니다.\n" -#. error message: -#: src/Ldap.rb:534 +#. error message: +#: src/Ldap.rb:534 msgid "" "\n" "The value of DN is missing or invalid.\n" @@ -56,8 +55,8 @@ "\n" "DN의 값이 없거나 잘못되었습니다.\n" -#. error message: -#: src/Ldap.rb:538 +#. error message: +#: src/Ldap.rb:538 msgid "" "\n" "Attribute type not found.\n" @@ -65,8 +64,8 @@ "\n" "속성 타입을 찾을수 없습니다.\n" -#. error message: -#: src/Ldap.rb:540 +#. error message: +#: src/Ldap.rb:540 msgid "" "\n" "Object class not found.\n" @@ -74,69 +73,69 @@ "\n" "객체 클래스를 찾을수 없습니다.\n" -#. error message, more specific description follows -#. error message -#. error message -#: src/Ldap.rb:545 src/Ldap.rb:782 src/Ldap.rb:848 +#. error message, more specific description follows +#. error message +#. error message +#: src/Ldap.rb:545 src/Ldap.rb:782 src/Ldap.rb:848 msgid "Connection to the LDAP server cannot be established." msgstr "LDAP 서버에 연결할 수 없습니다." -#. error message, more specific description follows -#: src/Ldap.rb:549 +#. error message, more specific description follows +#: src/Ldap.rb:549 msgid "A problem occurred while connecting to the LDAP server." msgstr "LDAP 서버에 연결하는 동안 문제가 발생했습니다." -#. error message, more specific description follows -#: src/Ldap.rb:553 +#. error message, more specific description follows +#: src/Ldap.rb:553 msgid "A problem occurred while reading data from the LDAP server." msgstr "LDAP 서버에서 데이터를 읽어 오는 동안 문제가 발생했습니다." -#. error message, more specific description follows -#: src/Ldap.rb:557 +#. error message, more specific description follows +#: src/Ldap.rb:557 msgid "A problem occurred while writing LDAP users." msgstr "LDAP 사용자를 쓰는 중 문제가 발생했습니다." -#. error message, more specific description follows -#: src/Ldap.rb:561 +#. error message, more specific description follows +#: src/Ldap.rb:561 msgid "A problem occurred while writing LDAP groups." msgstr "LDAP 그룹을 쓰는 중 문제가 발생했습니다." -#. error message, more specific description follows -#: src/Ldap.rb:565 +#. error message, more specific description follows +#: src/Ldap.rb:565 msgid "A problem occurred while writing data to the LDAP server." msgstr "LDAP 서버에 데이터를 쓰는 중 문제가 발생했습니다." -#. error message, more specific description follows -#: src/Ldap.rb:569 +#. error message, more specific description follows +#: src/Ldap.rb:569 msgid "A problem occurred while reading schema from the LDAP server." msgstr "LDAP 서버에서 스키마를 읽어 오는 동안 문제가 발생했습니다." -#. default error message -#: src/Ldap.rb:594 +#. default error message +#: src/Ldap.rb:594 msgid "An unknown LDAP error occurred." msgstr "알 수 없는 LDAP 오류가 발생했습니다." -#. checkbox label -#. checkbox label -#. checkbox label -#: src/Ldap.rb:604 src/Ldap.rb:791 src/Ldap.rb:857 +#. checkbox label +#. checkbox label +#. checkbox label +#: src/Ldap.rb:604 src/Ldap.rb:791 src/Ldap.rb:857 msgid "&Show Details" msgstr "상세 보기(&S)" -#. error message -#. error message -#. error message -#: src/Ldap.rb:722 src/Ldap.rb:742 src/Ldap.rb:912 +#. error message +#. error message +#. error message +#: src/Ldap.rb:722 src/Ldap.rb:742 src/Ldap.rb:912 msgid "Unknown error. Perhaps 'yast2-ldap' is not available." msgstr "알 수 없는 오류입니다. 'yast2-ldap'를 사용할 수 없는 것 같습니다." -#. question following error message (yes/no buttons follow) -#: src/Ldap.rb:800 +#. question following error message (yes/no buttons follow) +#: src/Ldap.rb:800 msgid "Really keep this configuration?" msgstr "이 구성을 유지하시겠습니까?" -#. question following error message (yes/no buttons follow) -#: src/Ldap.rb:865 +#. question following error message (yes/no buttons follow) +#: src/Ldap.rb:865 msgid "" "A possible reason for the failed connection may be that your client is\n" "configured for TLS/SSL but the server does not support it.\n" @@ -148,31 +147,31 @@ "\n" "TLS/SSL 없이 다시 연결하시겠습니까?\n" -#. Asks user for bind_dn and password to LDAP server -#. @param anonymous if anonymous access could be allowed -#. @return password -#: src/Ldap.rb:973 +#. Asks user for bind_dn and password to LDAP server +#. @param anonymous if anonymous access could be allowed +#. @return password +#: src/Ldap.rb:973 msgid "BindDN" msgstr "BindDN" -#. password entering label -#. password entering label -#: src/Ldap.rb:975 src/ldap_browser.rb:155 +#. password entering label +#. password entering label +#: src/Ldap.rb:975 src/ldap_browser.rb:155 msgid "&LDAP Server Password" msgstr "LDAP 서버 암호(&L)" -#. label -#: src/Ldap.rb:979 +#. label +#: src/Ldap.rb:979 msgid "Server: %1:%2" msgstr "서버: %1:%2" -#. button label -#: src/Ldap.rb:988 +#. button label +#: src/Ldap.rb:988 msgid "&Anonymous Access" msgstr "익명 접속(&A)" -#. error message, %1 is DN -#: src/Ldap.rb:1330 +#. error message, %1 is DN +#: src/Ldap.rb:1330 msgid "" "A direct parent for DN '%1' \n" "does not exist in the LDAP directory.\n" @@ -182,8 +181,8 @@ "LDAP 디렉토리 안에 존재 하지 않습니다.\n" "객체와 선택된 DN을 생성 할 수 없습니다.\n" -#. error message -#: src/Ldap.rb:1431 +#. error message +#: src/Ldap.rb:1431 msgid "" "An object with the selected DN exists, but it is not a template object.\n" "Select another one.\n" @@ -191,8 +190,8 @@ "선택한 DN을 가진 객체가 존재하지만 템플릿 객체가 아닙니다.\n" "다른 객체를 선택하십시오.\n" -#. yes/no popup, %1 is value of DN -#: src/Ldap.rb:1717 +#. yes/no popup, %1 is value of DN +#: src/Ldap.rb:1717 msgid "" "No entry with DN '%1'\n" "exists on the LDAP server. Create it now?\n" @@ -200,19 +199,19 @@ "LDAP 서버상에 '%1'DN 와\n" "아무런 엔트리도 존재하지 않습니다. 지금 그것을 생성 하시겠습니까?\n" -#. button label -#. button label -#: src/LdapPopup.rb:75 src/ldap_browser.rb:547 +#. button label +#. button label +#: src/LdapPopup.rb:75 src/ldap_browser.rb:547 msgid "&Open" msgstr "열기(&O)" -#. help text 1/3 -#: src/LdapPopup.rb:262 +#. help text 1/3 +#: src/LdapPopup.rb:262 msgid "<p>Set the new value for the current attribute.</p>" msgstr "<p>현재 속성들에 대한 새로운 값을 설정 하십시오.</p>" -#. help text 2/3 -#: src/LdapPopup.rb:264 +#. help text 2/3 +#: src/LdapPopup.rb:264 msgid "" "<p>If the attribute can have more values, add new entries\n" "with <b>Add Value</b>. Sometimes the button contains the list of\n" @@ -228,44 +227,44 @@ " 사용하여 LDAP 트리에서 선택할 수 있습니다.\n" " </p>\n" -#. help text 3/3, %1 is attribute name, description follows. -#. The description will be not translated: maybe add a note -#. "available only in english" to the sentence for other languages? -#. Example: -#. "<p>The description of attribute \"%1\"<br>(available only in english):</p>" -#. or: -#. "<p>The description (only in english) of attribute \"%1\":<br></p>" -#: src/LdapPopup.rb:287 +#. help text 3/3, %1 is attribute name, description follows. +#. The description will be not translated: maybe add a note +#. "available only in english" to the sentence for other languages? +#. Example: +#. "<p>The description of attribute \"%1\"<br>(available only in english):</p>" +#. or: +#. "<p>The description (only in english) of attribute \"%1\":<br></p>" +#: src/LdapPopup.rb:287 msgid "<p>The description of attribute \"%1\":<br></p>" msgstr "<p> \"%1\" 속성의 설명:<br></p>" -#. textentry label -#: src/LdapPopup.rb:311 +#. textentry label +#: src/LdapPopup.rb:311 msgid "&Value of \"%1\" Attribute" msgstr "속성 \"%1\" 의 값(&V)" -#. textentry label -#: src/LdapPopup.rb:322 +#. textentry label +#: src/LdapPopup.rb:322 msgid "&Values of \"%1\" Attribute" msgstr "속성 \"%1\"의 값들(&V)" -#. button label -#. button label -#: src/LdapPopup.rb:346 src/LdapPopup.rb:356 +#. button label +#. button label +#: src/LdapPopup.rb:346 src/LdapPopup.rb:356 msgid "&Add Value" msgstr "값 추가(&A)" -#. menubutton item (default value) -#: src/LdapPopup.rb:350 +#. menubutton item (default value) +#: src/LdapPopup.rb:350 msgid "&Empty Entry" msgstr "텅빈 엔트리(&E)" -#: src/LdapPopup.rb:351 +#: src/LdapPopup.rb:351 msgid "Bro&wse" msgstr "검색(&W)" -#. error popup -#: src/LdapPopup.rb:439 +#. error popup +#: src/LdapPopup.rb:439 msgid "" "The value '%1' already exists.\n" "Please select another one." @@ -273,28 +272,28 @@ "'%1' 값은 이미 존재합니다.\n" "다른값을 선택하십시오." -#. description of configuration object -#: src/LdapPopup.rb:467 +#. description of configuration object +#: src/LdapPopup.rb:467 msgid "Configuration of user management tools" msgstr "유저 관리의 설정 도구들" -#. description of configuration object -#: src/LdapPopup.rb:471 +#. description of configuration object +#: src/LdapPopup.rb:471 msgid "Configuration of group management tools" msgstr "그룹 관리의 설정 도구들" -#. label -#: src/LdapPopup.rb:476 +#. label +#: src/LdapPopup.rb:476 msgid "Object Class of New Module" msgstr "새로운 모듈의 객체 클래스" -#. textentry label, do not translate "cn" -#: src/LdapPopup.rb:504 +#. textentry label, do not translate "cn" +#: src/LdapPopup.rb:504 msgid "&Name of New Module (\"cn\" Value)" msgstr "새로운 모듈의 이름(&N)(\"cn\" 값)" -#. error popup -#: src/LdapPopup.rb:530 +#. error popup +#: src/LdapPopup.rb:530 msgid "" "The entered value already exists.\n" "Select another one.\n" @@ -302,70 +301,61 @@ "입력된 값은 이미 존재합니다.\n" "다른 값을 선택해 주십시오.\n" -#. error popup -#: src/LdapPopup.rb:536 +#. error popup +#: src/LdapPopup.rb:536 msgid "Enter the module name." msgstr "모듈 이름을 입력 하십시오." -#. help text 1/3 -#: src/LdapPopup.rb:555 +#. help text 1/3 +#: src/LdapPopup.rb:555 msgid "" "<p>Here, set the values of attributes belonging\n" -"to an object using the current template. Such values are used as defaults " -"when\n" +"to an object using the current template. Such values are used as defaults when\n" "the new object is created.</p>\n" msgstr "" "<p>여기,현재 템플리트를 사용중인 객체에 속하는\n" "속성들의 값을 설정하십시오. 각각의 값들은\n" "새로운 객체가 생성될때 기본으로써 사용됩니다.</p>\n" -#. // help text 2/3 do not translate "defaultObjectClass" -#. _("<p>The list of attributes provided in <b>Attribute Name</b> is the -#. list of allowed attributes for objects described in the \"defaultObjectClass\" -#. entry of the current template.</p> -#. ") + -#. help text 3/3 do not translate "homedirectory" -#: src/LdapPopup.rb:567 +#. // help text 2/3 do not translate "defaultObjectClass" +#. _("<p>The list of attributes provided in <b>Attribute Name</b> is the +#. list of allowed attributes for objects described in the \"defaultObjectClass\" +#. entry of the current template.</p> +#. ") + +#. help text 3/3 do not translate "homedirectory" +#: src/LdapPopup.rb:567 msgid "" "<p>You can use special syntax to create attribute\n" -"values from existing ones. The expression <i>%attr_name</i> will be " -"replaced\n" +"values from existing ones. The expression <i>%attr_name</i> will be replaced\n" "with the value of attribute \"attr_name\" (for example, use \"/home/%uid\"\n" "as a value of \"homeDirectory\").</p>\n" msgstr "" -"<p>여러분은 존재하는 것으로 부터 속성 값들을 생성하기 위해서 특별한 구문을 사" -"용 합니다.\n" +"<p>여러분은 존재하는 것으로 부터 속성 값들을 생성하기 위해서 특별한 구문을 사용 합니다.\n" "<i>%attr_name</i> 표현은 \"attr_name\" 속성의 값으로 대체 될 것 입니다.\n" "(예,\"homeDirectory\")의 값으로써 \"/home/%uid\"을 사용 합니다.</p>\n" -#. combobox label -#: src/LdapPopup.rb:590 +#. combobox label +#: src/LdapPopup.rb:590 msgid "Attribute &Name" msgstr "속성 이름(&N)" -#. textentry label -#: src/LdapPopup.rb:596 +#. textentry label +#: src/LdapPopup.rb:596 msgid "Attribute &Value" msgstr "속성 값(&V)" -#. general help text for LDAP browser -#: src/ldap_browser.rb:62 +#. general help text for LDAP browser +#: src/ldap_browser.rb:62 msgid "<p>Browse the LDAP tree in the left part of the dialog.</p>" msgstr "<p>대화 상자 왼쪽에서 LDAP 트리를 검색합니다.</p>" -#. help text for LDAP browser -#: src/ldap_browser.rb:64 -msgid "" -"<p>Once the LDAP object is selected in the tree, the table shows the object " -"data. Use <b>Edit</b> to change the value of the selected attribute. Use " -"<b>Save</b> to save your changes to LDAP.</p>" -msgstr "" -"<p>트리에서 LDAP 객체를 선택하면 테이블에 객체 데이터가 나타납니다. 선택한 특" -"성 값을 변경하려면 <b>편집</b>을 사용하십시오. 변경사항을 LDAP에 저장하려면 " -"<b>저장</b>을 선택하십시오.</p>" +#. help text for LDAP browser +#: src/ldap_browser.rb:64 +msgid "<p>Once the LDAP object is selected in the tree, the table shows the object data. Use <b>Edit</b> to change the value of the selected attribute. Use <b>Save</b> to save your changes to LDAP.</p>" +msgstr "<p>트리에서 LDAP 객체를 선택하면 테이블에 객체 데이터가 나타납니다. 선택한 특성 값을 변경하려면 <b>편집</b>을 사용하십시오. 변경사항을 LDAP에 저장하려면 <b>저장</b>을 선택하십시오.</p>" -#. popup question (Continue/Cancel follows) -#: src/ldap_browser.rb:69 +#. popup question (Continue/Cancel follows) +#: src/ldap_browser.rb:69 msgid "" "There are unsaved changes in the current entry.\n" "Discard these changes?\n" @@ -373,49 +363,49 @@ "현재 엔트리에 저장하지 않은 변경 사항이 있습니다.\n" "이를 버리시겠습니까?\n" -#. dialog caption -#: src/ldap_browser.rb:85 +#. dialog caption +#: src/ldap_browser.rb:85 msgid "LDAP Browser" msgstr "LDAP 브라우저" -#. combobox item -#: src/ldap_browser.rb:101 +#. combobox item +#: src/ldap_browser.rb:101 msgid "Current LDAP Client settings" msgstr "현재 LDAP 클라이언트 설정" -#. combo box label -#. combo box label -#: src/ldap_browser.rb:135 src/ldap_browser.rb:747 +#. combo box label +#. combo box label +#: src/ldap_browser.rb:135 src/ldap_browser.rb:747 msgid "LDAP Connections" msgstr "LDAP 연결" -#. textentry label -#: src/ldap_browser.rb:146 +#. textentry label +#: src/ldap_browser.rb:146 msgid "LDAP Server" msgstr "LDAP 서버" -#. textentry label -#: src/ldap_browser.rb:152 +#. textentry label +#: src/ldap_browser.rb:152 msgid "Administrator DN" msgstr "관리자 DN" -#. check box label -#: src/ldap_browser.rb:162 +#. check box label +#: src/ldap_browser.rb:162 msgid "L&DAP TLS" msgstr "LDAP TLS(&D)" -#. button label -#: src/ldap_browser.rb:168 +#. button label +#: src/ldap_browser.rb:168 msgid "A&nonymous Access" msgstr "익명 액세스(&N)" -#. InputField label -#: src/ldap_browser.rb:230 +#. InputField label +#: src/ldap_browser.rb:230 msgid "Enter the name of the new LDAP connection" msgstr "새 LDAP 연결 이름을 입력합니다." -#. error popup, %1 is attribute name -#: src/ldap_browser.rb:452 +#. error popup, %1 is attribute name +#: src/ldap_browser.rb:452 msgid "" "The \"%1\" attribute is mandatory.\n" "Enter a value." @@ -423,17 +413,17 @@ "\"%1\"은(는) 필수 특성입니다.\n" "값을 입력하십시오." -#. button label -#: src/ldap_browser.rb:550 +#. button label +#: src/ldap_browser.rb:550 msgid "&Reload" msgstr "다시 읽기(&R)" -#. table header 1/2 -#: src/ldap_browser.rb:691 +#. table header 1/2 +#: src/ldap_browser.rb:691 msgid "Attribute" msgstr "속성" -#. table header 2/2 -#: src/ldap_browser.rb:693 +#. table header 2/2 +#: src/ldap_browser.rb:693 msgid "Value" msgstr "값" Modified: branches/SLE12-SP3/yast/ko/po/mail.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/mail.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/mail.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,19 +14,19 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the mail module -#: src/clients/mail.rb:60 +#. Command line help text for the mail module +#: src/clients/mail.rb:60 msgid "Configuration of mail" msgstr "메일 구성" -#. command line action help -#: src/clients/mail.rb:73 +#. command line action help +#: src/clients/mail.rb:73 msgid "Mail configuration summary" msgstr "메일 구성 요약" -#. TODO FIXME: Modify it to your needs! -#. For translators: mail read dialog help, part 1 of 2 -#: src/include/mail/helps.rb:30 +#. TODO FIXME: Modify it to your needs! +#. For translators: mail read dialog help, part 1 of 2 +#: src/include/mail/helps.rb:30 msgid "" "<P><B><BIG>Initializing mail</BIG></B><BR>\n" "Please wait...\n" @@ -36,8 +36,8 @@ "잠시 기다리십시오...\n" "<BR></P>\n" -#. For translators: mail read dialog help, part 2 of 2 -#: src/include/mail/helps.rb:36 +#. For translators: mail read dialog help, part 2 of 2 +#: src/include/mail/helps.rb:36 msgid "" "<P><B><BIG>Aborting the initialization:</BIG></B><BR>\n" "Safely abort the configuration utility by pressing <B>Abort</B>\n" @@ -48,9 +48,9 @@ "<B>중지</B>버튼을 누르면 구성 유틸리티를 안전하게 중지시킵니다.\n" "</P>\n" -#. TODO FIXME: Modify it to your needs! -#. For translators: mail write dialog help, part 1 of 2 -#: src/include/mail/helps.rb:49 +#. TODO FIXME: Modify it to your needs! +#. For translators: mail write dialog help, part 1 of 2 +#: src/include/mail/helps.rb:49 msgid "" "<P><B><BIG>Saving mail configuration</BIG></B><BR>\n" "Please wait...\n" @@ -60,8 +60,8 @@ "잠시 기다리십시오...\n" "<BR></P>\n" -#. For translators: mail write dialog help, part 2 of 2 -#: src/include/mail/helps.rb:55 +#. For translators: mail write dialog help, part 2 of 2 +#: src/include/mail/helps.rb:55 msgid "" "<P><B><BIG>Aborting saving:</BIG></B><BR>\n" "Abort saving by pressing <B>Abort</B>.\n" @@ -70,13 +70,12 @@ msgstr "" "<P><B><BIG>저장 취소:</BIG></B><BR>\n" "<B>중지</B> 버튼을 누르면강제로 저장을 중지합니다.\n" -"추가적인 대화상자는 강제로 중지하는 것이 안전한지를 당신에게 알려줄 것입니" -"다.\n" +"추가적인 대화상자는 강제로 중지하는 것이 안전한지를 당신에게 알려줄 것입니다.\n" "</P>\n" -#. Translators: mailer (MTA) selection dialog help, part 1 of 1 -#. do not translate MTA -#: src/include/mail/helps.rb:67 +#. Translators: mailer (MTA) selection dialog help, part 1 of 1 +#. do not translate MTA +#: src/include/mail/helps.rb:67 msgid "" "<p>Select the mail system (Mail Transfer Agent, MTA)\n" "to install.</p>" @@ -84,8 +83,8 @@ "<p>설치할 메일 시스템을 선택하십시오\n" "(메일 전송 관리자,MTA)</p>" -#. Translators: connection type dialog help, part 1 of 2 -#: src/include/mail/helps.rb:73 +#. Translators: connection type dialog help, part 1 of 2 +#: src/include/mail/helps.rb:73 msgid "" "\n" "<p>How are you connected to the Internet? With a dial-up connection,\n" @@ -94,71 +93,62 @@ msgstr "" "\n" "<p>어떻게 인터넷에 연결되어 있습니까? 전화접속 연결을 했다면,\n" -"메일은 곧바로 발송이 되지 않을 것입니다. 하지만 <b>sendmail -q</b>을 실" -"행하면 \n" +"메일은 곧바로 발송이 되지 않을 것입니다. 하지만 <b>sendmail -q</b>을 실행하면 \n" "메일이 곧바로 발송이 될 것입니다.</p>\n" -#: src/include/mail/helps.rb:79 +#: src/include/mail/helps.rb:79 msgid "" "<p>If choosing <b>No Connection</b>, the mail server will be started.\n" -"However, only local mail transport is possible. The MTA listens to the " -"localhost.</p>\n" +"However, only local mail transport is possible. The MTA listens to the localhost.</p>\n" msgstr "" "<p><b>연결 없음</b>을 선택하면 메일 서버가 시작되지만 로컬 메일만\n" "전송할 수 있습니다. MTA에서 로컬 호스트 수신을 대기합니다.</p>\n" -#. Translators: masquerading dialog help, part 1 of 1 -#: src/include/mail/helps.rb:88 +#. Translators: masquerading dialog help, part 1 of 1 +#: src/include/mail/helps.rb:88 msgid "" "\n" "<p>Specify the rewriting of the sender's address here for each user.</p>\n" msgstr "" "\n" -"<p>각 사용자의 보낸 사람의 주소를 여기에 재 작성하여 구체적으로 지정합니다.." -"</p>\n" +"<p>각 사용자의 보낸 사람의 주소를 여기에 재 작성하여 구체적으로 지정합니다..</p>\n" -#. Translators: authentication dialog help 1/4 -#: src/include/mail/helps.rb:96 +#. Translators: authentication dialog help 1/4 +#: src/include/mail/helps.rb:96 msgid "" "\n" "<p>Some servers require authentication for sending mails. Here you can\n" -"enter information for this option. If you do not want to use " -"authentication,\n" +"enter information for this option. If you do not want to use authentication,\n" "simply leave these fields empty.</p>\n" msgstr "" "\n" "<p>몇몇 서버들은 메일을 보낼때 인증을 필요로 합니다. 여러분들은\n" -"이 옵션을 위해 인증 관련정보를 넣을 수 있습니다. 만일 인증을 원하시지 않는다" -"면,\n" +"이 옵션을 위해 인증 관련정보를 넣을 수 있습니다. 만일 인증을 원하시지 않는다면,\n" "이 필드를 공백으로 두십시오.</p>\n" -#. Translators: authentication dialog help 2/4 -#: src/include/mail/helps.rb:103 +#. Translators: authentication dialog help 2/4 +#: src/include/mail/helps.rb:103 msgid "" "\n" "<p>The outgoing mail server is generally intended for dial-up connections.\n" -"Enter the Internet service provider's SMTP server, such as <b>smtp.provider." -"com</b>.</p>\n" +"Enter the Internet service provider's SMTP server, such as <b>smtp.provider.com</b>.</p>\n" msgstr "" "\n" -"<p>보내는 메일 서버는 전화접속 연결과 같이 인터넷 서비스 제공자가 일반적으로 " -"제공하고 있습니다.\n" +"<p>보내는 메일 서버는 전화접속 연결과 같이 인터넷 서비스 제공자가 일반적으로 제공하고 있습니다.\n" "<b>smtp.provider.com</b>와 같은 인터넷 서비스 제공자의 SMTP 서버를\n" "입력하십시오.</p>\n" -#. Translators: authentication dialog help 3/4 -#: src/include/mail/helps.rb:109 +#. Translators: authentication dialog help 3/4 +#: src/include/mail/helps.rb:109 msgid "" "\n" -"<p>In the <b>User Name</b> field, enter the user name assigned by from your " -"provider.</p>\n" +"<p>In the <b>User Name</b> field, enter the user name assigned by from your provider.</p>\n" msgstr "" "\n" -"<p><b>사용자 이름</b> 공간에, 서비스 제공자에게 받은 할당받은 사용자 이름을 " -"입력하세요.</p>\n" +"<p><b>사용자 이름</b> 공간에, 서비스 제공자에게 받은 할당받은 사용자 이름을 입력하세요.</p>\n" -#. Translators: authentication dialog help 4/4 -#: src/include/mail/helps.rb:113 +#. Translators: authentication dialog help 4/4 +#: src/include/mail/helps.rb:113 msgid "" "\n" "<p>Enter your password in the <b>Password</b> field.</p>\n" @@ -166,8 +156,8 @@ "\n" "<p>패스워드 필드에 패스워드를 입력하세요.</p>\n" -#. Translators: authentication dialog help, 5/4 -#: src/include/mail/helps.rb:115 +#. Translators: authentication dialog help, 5/4 +#: src/include/mail/helps.rb:115 msgid "" "\n" "<p>Note: For simplicity, only one server is displayed in this dialog,\n" @@ -179,8 +169,8 @@ "오직 하나의 서버만 대화 상자에 표시됩니다.\n" "표시되지 않은 서버는 사라진 것이 아닙니다.</p>\n" -#. Translators: downloading dialog help, part 1 of 1 -#: src/include/mail/helps.rb:126 +#. Translators: downloading dialog help, part 1 of 1 +#: src/include/mail/helps.rb:126 msgid "" "\n" "<p>These are parameters for downloading mail from\n" @@ -190,22 +180,21 @@ "<p>이것은 <b>fetchmail</b>을 사용하는 POP 또는 IMAP 서버로\n" "메일을 다운로드 하기 위한 파라미터입니다.</p>\n" -#. Translators: aliases dialog help, part 1 of 2 -#: src/include/mail/helps.rb:136 +#. Translators: aliases dialog help, part 1 of 2 +#: src/include/mail/helps.rb:136 msgid "" "\n" "<p>This table redirects mail delivered locally.\n" "Redirect it to another local user (useful for system accounts,\n" -"especially for <b>root</b>), to a remote address, or to a list of addresses." -"</p>\n" +"especially for <b>root</b>), to a remote address, or to a list of addresses.</p>\n" msgstr "" "\n" "<p>이 테이블은 어떤 장소에 전송되어진 메일을 전송합니다.\n" "원격 주소를 위하여 또는 주소의 목록을 위하여 (시스템 계정을 위해 유용하고,\n" "<b>루트</b>를 위하여 특별히) 다른 로컬 사용자에게 전송합니다. </p>\n" -#. Translators: aliases dialog help, part 2 of 2 -#: src/include/mail/helps.rb:143 +#. Translators: aliases dialog help, part 2 of 2 +#: src/include/mail/helps.rb:143 msgid "" "\n" "<p>See the aliases(5) manual page\n" @@ -215,8 +204,8 @@ "<p> 향상된 기능들의 설명을 위해서는\n" "앨리어스(5) 매뉴얼 메이지를 참조합니다.</p>\n" -#. Translators: virtual domains dialog help, part 1 of 2 -#: src/include/mail/helps.rb:153 +#. Translators: virtual domains dialog help, part 1 of 2 +#: src/include/mail/helps.rb:153 msgid "" "\n" "<p>This table redirects incoming mail. Unlike the alias table,\n" @@ -224,13 +213,12 @@ "part of the address.</p>\n" msgstr "" "\n" -"<p>이 테이블은 수신된 메일을 전송합니다. 앨리어스 테이블과 일치하지 않는다" -"면,\n" +"<p>이 테이블은 수신된 메일을 전송합니다. 앨리어스 테이블과 일치하지 않는다면,\n" "이것은 물로 어드레스의 도메인 부분을 \n" "검토해야 합니다.</p>\n" -#. Translators: virtual domains dialog help, part 2 of 2 -#: src/include/mail/helps.rb:160 +#. Translators: virtual domains dialog help, part 2 of 2 +#: src/include/mail/helps.rb:160 msgid "" "\n" "<p>It allows hosting multiple \"virtual domains\"\n" @@ -240,9 +228,9 @@ "<p>이것은 하나의 머신에서 \"버츄얼 도메인\"을\n" "사용하여 다양한 호스팅을 지원합니다..</p>\n" -#. Translators: continue/cancel dialog -#. %1 is a sysconfig variable name -#: src/include/mail/ui.rb:120 +#. Translators: continue/cancel dialog +#. %1 is a sysconfig variable name +#: src/include/mail/ui.rb:120 msgid "" "The setting %1 is turned off. You have\n" "probably modified the configuration files directly.\n" @@ -254,14 +242,14 @@ "계속하면 켜지고\n" "Config Postfix가 수동 변경사항을 덮어씁니다.\n" -#. After text freeze, but -#. a) either something is very broken -> user must know -#. b) user installed a different MTA -> knowledgeable enough to -#. ba) never see this message anyway -#. bb) read English -#. TODO: look at exim and mention it in the popup -#. Translators: error popup -#: src/include/mail/ui.rb:140 +#. After text freeze, but +#. a) either something is very broken -> user must know +#. b) user installed a different MTA -> knowledgeable enough to +#. ba) never see this message anyway +#. bb) read English +#. TODO: look at exim and mention it in the popup +#. Translators: error popup +#: src/include/mail/ui.rb:140 msgid "" "YaST can only configure Postfix and Sendmail,\n" "but neither of them is installed." @@ -269,130 +257,129 @@ "YaST는 Postfix와 Sendmail만 구성할 수 있지만\n" "두 항목 모두 설치되지 않았습니다." -#. not to be displayed, #37554. -#. but ProbePackages still has to be called. -#. continue-cancel popup -#: src/include/mail/ui.rb:157 +#. not to be displayed, #37554. +#. but ProbePackages still has to be called. +#. continue-cancel popup +#: src/include/mail/ui.rb:157 msgid "The configuration will be written now.\n" msgstr "설정은 지금 작성될 것입니다.\n" -#. Translators: dialog caption -#. Mailer: Sendmail or Postfix -#. Translators: frame label -#. Mailer: Sendmail or Postfix -#: src/include/mail/ui.rb:204 src/include/mail/ui.rb:208 +#. Translators: dialog caption +#. Mailer: Sendmail or Postfix +#. Translators: frame label +#. Mailer: Sendmail or Postfix +#: src/include/mail/ui.rb:204 src/include/mail/ui.rb:208 msgid "Mail transfer agent" msgstr "메일 전송 에이전트" -#. Translators: dialog caption -#: src/include/mail/ui.rb:279 +#. Translators: dialog caption +#: src/include/mail/ui.rb:279 msgid "General Settings" msgstr "일반 설정" -#. Translators: frame label -#: src/include/mail/ui.rb:282 +#. Translators: frame label +#: src/include/mail/ui.rb:282 msgid "Connection type" msgstr "연결 타입" -#. Translators: radio button label -#: src/include/mail/ui.rb:290 +#. Translators: radio button label +#: src/include/mail/ui.rb:290 msgid "&Permanent" msgstr "전용선(&P)" -#. Translators: radio button label -#: src/include/mail/ui.rb:294 +#. Translators: radio button label +#: src/include/mail/ui.rb:294 msgid "&Dial-up" msgstr "전화접속(&D)" -#. Translators: radio button label -#: src/include/mail/ui.rb:299 +#. Translators: radio button label +#: src/include/mail/ui.rb:299 msgid "No &connection" msgstr "연결 안 함(&C)" -#. Translators: radio button label -#: src/include/mail/ui.rb:306 +#. Translators: radio button label +#: src/include/mail/ui.rb:306 msgid "Do not start Postfix as Daemon" msgstr "Postfix를 데몬으로 시작 안 함(&O)" -#. Translators: dialog caption -#. frame label -#: src/include/mail/ui.rb:394 src/include/mail/ui.rb:421 +#. Translators: dialog caption +#. frame label +#: src/include/mail/ui.rb:394 src/include/mail/ui.rb:421 msgid "Outgoing Mail" msgstr "발신 메일" -#. OUTGOING NOMX -#: src/include/mail/ui.rb:400 +#. OUTGOING NOMX +#: src/include/mail/ui.rb:400 msgid "Do not make MX lookup for the outgoing mail server." msgstr "발신 메일 서버에 대한 MX 조회를 수행하지 마십시오." -#. TLS -#: src/include/mail/ui.rb:402 +#. TLS +#: src/include/mail/ui.rb:402 msgid "TLS encryption" msgstr "TLS 암호화" #: src/include/mail/ui.rb:406 src/modules/Mail.rb:1335 -#: src/modules/Mail.rb:1338 - src/modules/Mail.rb:1341 +#: src/modules/Mail.rb:1338 src/modules/Mail.rb:1341 msgid "No" msgstr "아니오" -#: src/include/mail/ui.rb:407 +#: src/include/mail/ui.rb:407 msgid "Use" msgstr "사용" -#: src/include/mail/ui.rb:408 +#: src/include/mail/ui.rb:408 msgid "Enforce" msgstr "항상 사용" -#: src/include/mail/ui.rb:412 +#: src/include/mail/ui.rb:412 msgid "&Masquerading" msgstr "머스커레이딩(&M)" -#: src/include/mail/ui.rb:413 +#: src/include/mail/ui.rb:413 msgid "&Authentication" msgstr "인증(&A)" -#. Translators: dialog caption -#: src/include/mail/ui.rb:479 +#. Translators: dialog caption +#: src/include/mail/ui.rb:479 msgid "Incoming Mail" msgstr "수신 메일" -#. pushbutton -#: src/include/mail/ui.rb:519 +#. pushbutton +#: src/include/mail/ui.rb:519 msgid "&Details..." msgstr "세부 사항...(&D)" -#: src/include/mail/ui.rb:525 +#: src/include/mail/ui.rb:525 msgid "Start &fetchmail" msgstr "fetchmail 시작(&T)" -#: src/include/mail/ui.rb:526 +#: src/include/mail/ui.rb:526 msgid "manual" msgstr "수동" -#: src/include/mail/ui.rb:526 +#: src/include/mail/ui.rb:526 msgid "daemon" msgstr "데몬" -#. frame label: mail downloading (fetchmail) -#: src/include/mail/ui.rb:532 +#. frame label: mail downloading (fetchmail) +#: src/include/mail/ui.rb:532 msgid "&Downloading" msgstr "다운로드(&D)" -#. menu button: details of incoming mail -#: src/include/mail/ui.rb:551 +#. menu button: details of incoming mail +#: src/include/mail/ui.rb:551 msgid "&Aliases..." msgstr "앨리어스(&A)" -#: src/include/mail/ui.rb:552 +#: src/include/mail/ui.rb:552 msgid "&Virtual domains..." msgstr "버츄얼 도메인(&V)" -#. popup text -#. %1: variable name (eg. POSTFIX_LOCALDOMAINS) -#. %2: file name (eg. /etc/sysconfig/postfix) -#. %3: value (about 50 characters) -#: src/include/mail/ui.rb:632 +#. popup text +#. %1: variable name (eg. POSTFIX_LOCALDOMAINS) +#. %2: file name (eg. /etc/sysconfig/postfix) +#. %3: value (about 50 characters) +#: src/include/mail/ui.rb:632 msgid "" "To be able to deliver mail to your local MTA,\n" "the value of %1 in %2 will be set to\n" @@ -402,11 +389,11 @@ "%2 파일의 %1 값을\n" "\"%3\"(으)로 설정해야 합니다." -#. There is a check whether the information from the UI is -#. correct and complete. The login name may contain only -#. certain characters and must begin with a letter. -#. Already in Translation Memory -#: src/include/mail/ui.rb:673 +#. There is a check whether the information from the UI is +#. correct and complete. The login name may contain only +#. certain characters and must begin with a letter. +#. Already in Translation Memory +#: src/include/mail/ui.rb:673 msgid "" "The user login may contain only\n" "lower case letters, digits, \"-\" and \"_\"\n" @@ -418,213 +405,213 @@ "\"_\"로 시작을 해야합니다.\n" "다시 시도해 주십시오.\n" -#. Translators: popup dialog heading -#: src/include/mail/ui.rb:712 +#. Translators: popup dialog heading +#: src/include/mail/ui.rb:712 msgid "Sender address rewriting" msgstr "재 작성한 보낸 사람 주소" -#. Translators: text entry label -#. Translators: combo box label -#: src/include/mail/ui.rb:715 src/include/mail/ui.rb:720 -#: src/include/mail/widgets.rb:269 +#. Translators: text entry label +#. Translators: combo box label +#: src/include/mail/ui.rb:715 src/include/mail/ui.rb:720 +#: src/include/mail/widgets.rb:269 msgid "&Local user" msgstr "로컬 사용자(&L)" -#. Translators: text entry label -#: src/include/mail/ui.rb:725 +#. Translators: text entry label +#: src/include/mail/ui.rb:725 msgid "&Display as" msgstr "표시(&D)" -#. Translators: error message -#: src/include/mail/ui.rb:757 +#. Translators: error message +#: src/include/mail/ui.rb:757 msgid "The address for this user is already defined." msgstr "이 사용자를 위한 주소는 이미 설정되어 있습니다." -#. error popup -#: src/include/mail/ui.rb:763 +#. error popup +#: src/include/mail/ui.rb:763 msgid "The mail address format is incorrect." msgstr "이 메일 주소의 포맷은 일치하지 않습니다." -#. Translators: dialog caption -#: src/include/mail/ui.rb:788 +#. Translators: dialog caption +#: src/include/mail/ui.rb:788 msgid "Masquerading" msgstr "머스커레이딩" -#. Translators: radio button label -#: src/include/mail/ui.rb:803 +#. Translators: radio button label +#: src/include/mail/ui.rb:803 msgid "Masquerade &local domains" msgstr "로컬 도메인 머스커레이드(&L)" -#. `HBox ( -#. `HSpacing (2), -#. `TextEntry (`id (`masqdomains), `opt (`disabled), _("That is"), ld) -#. // `Left (`Label (`opt (`outputField, `hstretch), ld)) -#. ), -#. Translators: radio button label -#: src/include/mail/ui.rb:816 +#. `HBox ( +#. `HSpacing (2), +#. `TextEntry (`id (`masqdomains), `opt (`disabled), _("That is"), ld) +#. // `Left (`Label (`opt (`outputField, `hstretch), ld)) +#. ), +#. Translators: radio button label +#: src/include/mail/ui.rb:816 msgid "Ma&squerade other domains" msgstr "다른 도메인들 머스커레이드(&S)" -#. Translators: text entry label -#: src/include/mail/ui.rb:826 +#. Translators: text entry label +#: src/include/mail/ui.rb:826 msgid "Do&mains to masquerade" msgstr "머스커레이드를 위한 도메인들(&M)" -#. Translators: table column headings -#. Translators: table column headings -#: src/include/mail/ui.rb:838 src/include/mail/ui.rb:1156 +#. Translators: table column headings +#. Translators: table column headings +#: src/include/mail/ui.rb:838 src/include/mail/ui.rb:1156 msgid "Local user" msgstr "로컬 사용자" -#. Translators: table column headings -#: src/include/mail/ui.rb:840 +#. Translators: table column headings +#: src/include/mail/ui.rb:840 msgid "Display as" msgstr "출력" -#. `HBox ( -#. `HWeight (1, `ComboBox (`id (`user), `opt (`editable), _("Local user"), -#. ["holly", "jane", "tarzan"])), -#. `HWeight (2, `TextEntry (`id (`address), _("Display as"), "holly@red.dwarf")) -#. ), -#: src/include/mail/ui.rb:850 src/include/mail/ui.rb:1161 -#: src/include/mail/ui.rb:1317 src/include/mail/ui.rb:1400 +#. `HBox ( +#. `HWeight (1, `ComboBox (`id (`user), `opt (`editable), _("Local user"), +#. ["holly", "jane", "tarzan"])), +#. `HWeight (2, `TextEntry (`id (`address), _("Display as"), "holly@red.dwarf")) +#. ), +#: src/include/mail/ui.rb:850 src/include/mail/ui.rb:1161 +#: src/include/mail/ui.rb:1317 src/include/mail/ui.rb:1400 msgid "A&dd" msgstr "추가(&D)" -#: src/include/mail/ui.rb:851 src/include/mail/ui.rb:1162 -#: src/include/mail/ui.rb:1318 src/include/mail/ui.rb:1401 +#: src/include/mail/ui.rb:851 src/include/mail/ui.rb:1162 +#: src/include/mail/ui.rb:1318 src/include/mail/ui.rb:1401 msgid "&Edit" msgstr "편집(&E)" -#: src/include/mail/ui.rb:852 +#: src/include/mail/ui.rb:852 msgid "Dele&te" msgstr "삭제(&T)" -#. Translators: error popup -#. Already in Translation Memory -#: src/include/mail/ui.rb:919 +#. Translators: error popup +#. Already in Translation Memory +#: src/include/mail/ui.rb:919 msgid "The domain name is incorrect" msgstr "도메인 이름이 일치하지 않습니다" -#. string mod = listToString (Mail::masquerade_other_domains); -#. list<string> lmod = []; -#. list<map> mu = Mail::masquerade_users; -#. Translators: dialog caption -#: src/include/mail/ui.rb:955 +#. string mod = listToString (Mail::masquerade_other_domains); +#. list<string> lmod = []; +#. list<map> mu = Mail::masquerade_users; +#. Translators: dialog caption +#: src/include/mail/ui.rb:955 msgid "Outgoing Server Authentication" msgstr "보내는 메일서버 인증" -#. text entry -#: src/include/mail/ui.rb:963 +#. text entry +#: src/include/mail/ui.rb:963 msgid "Outgoing &Server" msgstr "보내는 메일 서버(&S)" -#. text entry -#: src/include/mail/ui.rb:965 +#. text entry +#: src/include/mail/ui.rb:965 msgid "&User name" msgstr "사용자 이름(&U)" -#. password entry -#: src/include/mail/ui.rb:967 +#. password entry +#: src/include/mail/ui.rb:967 msgid "&Password" msgstr "패스워드(&P)" -#. Translators: popup dialog heading -#. Translators: dialog caption -#: src/include/mail/ui.rb:1071 src/include/mail/ui.rb:1122 +#. Translators: popup dialog heading +#. Translators: dialog caption +#: src/include/mail/ui.rb:1071 src/include/mail/ui.rb:1122 msgid "Mail downloading" msgstr "메일 다운로드" -#. Translators: table column headings -#: src/include/mail/ui.rb:1150 +#. Translators: table column headings +#: src/include/mail/ui.rb:1150 msgid "Server" msgstr "서버" -#. Translators: table column headings -#: src/include/mail/ui.rb:1152 +#. Translators: table column headings +#: src/include/mail/ui.rb:1152 msgid "Protocol" msgstr "프로토콜" -#. Translators: table column headings -#: src/include/mail/ui.rb:1154 +#. Translators: table column headings +#: src/include/mail/ui.rb:1154 msgid "User" msgstr "사용자" -#: src/include/mail/ui.rb:1163 src/include/mail/ui.rb:1319 -#: src/include/mail/ui.rb:1402 +#: src/include/mail/ui.rb:1163 src/include/mail/ui.rb:1319 +#: src/include/mail/ui.rb:1402 msgid "De&lete" msgstr "삭제(&L)" -#. Translators: popup dialog heading -#: src/include/mail/ui.rb:1235 +#. Translators: popup dialog heading +#: src/include/mail/ui.rb:1235 msgid "Incoming mail redirection" msgstr "수신 메일 전송" -#. Translators: text entry label -#: src/include/mail/ui.rb:1237 +#. Translators: text entry label +#: src/include/mail/ui.rb:1237 msgid "&Alias" msgstr "앨리어스(&A)" -#. Translators: text entry label -#: src/include/mail/ui.rb:1239 +#. Translators: text entry label +#: src/include/mail/ui.rb:1239 msgid "&Destinations" msgstr "보낼곳(&D)" -#. Translators: error message -#: src/include/mail/ui.rb:1272 +#. Translators: error message +#: src/include/mail/ui.rb:1272 msgid "The alias format is incorrect." msgstr "이 앨리어스 포맷은 일치하지 않습니다." -#. Translators: error message -#: src/include/mail/ui.rb:1277 +#. Translators: error message +#: src/include/mail/ui.rb:1277 msgid "The destinations for this alias are already defined." msgstr "이 앨리어스를 위한 목적지는 이미 설정되었습니다." -#. Translators: dialog caption -#. summary item -#: src/include/mail/ui.rb:1301 src/modules/Mail.rb:1348 +#. Translators: dialog caption +#. summary item +#: src/include/mail/ui.rb:1301 src/modules/Mail.rb:1348 msgid "Aliases" msgstr "별칭" -#. Translators: table column headings -#. Translators: table column headings -#: src/include/mail/ui.rb:1309 src/include/mail/ui.rb:1392 +#. Translators: table column headings +#. Translators: table column headings +#: src/include/mail/ui.rb:1309 src/include/mail/ui.rb:1392 msgid "Alias" msgstr "앨리어스" -#. Translators: table column headings -#. Translators: table column headings -#: src/include/mail/ui.rb:1311 src/include/mail/ui.rb:1394 +#. Translators: table column headings +#. Translators: table column headings +#: src/include/mail/ui.rb:1311 src/include/mail/ui.rb:1394 msgid "Destinations" msgstr "보낼곳" -#. Translators: dialog caption -#: src/include/mail/ui.rb:1384 +#. Translators: dialog caption +#: src/include/mail/ui.rb:1384 msgid "Virtual domains" msgstr "가상 도메인" -#. Translators: dialog caption -#: src/include/mail/ui.rb:1502 +#. Translators: dialog caption +#: src/include/mail/ui.rb:1502 msgid "Mail configuration" msgstr "메일 설정" -#. label -#: src/include/mail/ui.rb:1504 +#. label +#: src/include/mail/ui.rb:1504 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. just a template, do not translate -#: src/include/mail/widgets.rb:71 +#. just a template, do not translate +#: src/include/mail/widgets.rb:71 msgid "." msgstr "." -#. Translators: text entry label -#: src/include/mail/widgets.rb:79 +#. Translators: text entry label +#: src/include/mail/widgets.rb:79 msgid "&Outgoing mail server" msgstr "보내는 메일 서버(&O)" -#. help text -#: src/include/mail/widgets.rb:83 +#. help text +#: src/include/mail/widgets.rb:83 msgid "" "\n" "<p>The outgoing mail server is generally intended for dial-up connections.\n" @@ -636,13 +623,13 @@ "<b>smtp.provider.com</b>와 같은 인터넷 서비스 제공자의 SMTP 서버를\n" "입력하십시오.</p>\n" -#. Translators: text entry label -#: src/include/mail/widgets.rb:102 +#. Translators: text entry label +#: src/include/mail/widgets.rb:102 msgid "Do&main for the 'From' header" msgstr "보낸 사람' 헤더에 대한 도메인(&M)" -#. help text -#: src/include/mail/widgets.rb:106 +#. help text +#: src/include/mail/widgets.rb:106 msgid "" "\n" "<p>You may want the mail you sent to appear as if it originated from\n" @@ -654,13 +641,13 @@ "처럼 보내는 것을 원할 것입니다.제공되는 텍스트\n" "또는 자세한 다이얼로그 박스를 사용하세요.</p>\n" -#. Translators: text entry label -#: src/include/mail/widgets.rb:122 +#. Translators: text entry label +#: src/include/mail/widgets.rb:122 msgid "&Domains for locally delivered mail" msgstr "로컬로 전송된 메일을 위한 도메인(&D)" -#. help text -#: src/include/mail/widgets.rb:126 +#. help text +#: src/include/mail/widgets.rb:126 msgid "" "\n" "<p>Here, specify the domains for which the mail\n" @@ -672,13 +659,13 @@ "도메인 입니다. 만약 아무것도 입력하지 않는다면,\n" "로컬 호스트 명으로 가정할 것입니다.</p>\n" -#. check box label -#: src/include/mail/widgets.rb:142 +#. check box label +#: src/include/mail/widgets.rb:142 msgid "Accept remote &SMTP connections" msgstr "원격 SMTP 연결 수락.(&S)" -#. help text -#: src/include/mail/widgets.rb:144 +#. help text +#: src/include/mail/widgets.rb:144 msgid "" "\n" "<p>Mail can be received directly via the SMTP protocol\n" @@ -690,26 +677,24 @@ "또는 <b>fetchmail</b>을 사용하는 POP 또는 IMAP 서버로부터 \n" "다운로드 할 수 있습니다.</p>" -#. checkbox label -#: src/include/mail/widgets.rb:156 +#. checkbox label +#: src/include/mail/widgets.rb:156 msgid "&Enable virus scanning (AMaViS)" msgstr "바이스 검사 활성화(AmaViS)(&E)" -#. help text -#: src/include/mail/widgets.rb:162 +#. help text +#: src/include/mail/widgets.rb:162 msgid "" "\n" -"<p><b>Enabling virus scanning (AMaViS)</b> checks incoming and outgoing " -"mail\n" +"<p><b>Enabling virus scanning (AMaViS)</b> checks incoming and outgoing mail\n" "with AMaViS.</p>\n" msgstr "" "\n" -"<p><b>바이러스 스캔(AMaViS)을 활성화</b>하면 수신 메일과 발신 메일이 AMaViS" -"를\n" +"<p><b>바이러스 스캔(AMaViS)을 활성화</b>하면 수신 메일과 발신 메일이 AMaViS를\n" "통해 확인됩니다.</p>\n" -#. help text -#: src/include/mail/widgets.rb:168 +#. help text +#: src/include/mail/widgets.rb:168 msgid "" "<p>Enabling AMaViS will also enable the following modules: </p>\n" "<p><b>Spamassassin</b> SPAM scanner</p>\n" @@ -721,8 +706,8 @@ "<p><b>DKIM</b>은 도메인 키 서명 수신 메일을 확인합니다.</p>\n" "<p><b>Clamav</b>는 원본 바이러스 스캐너 엔진을 엽니다.</p>" -#. help text -#: src/include/mail/widgets.rb:175 +#. help text +#: src/include/mail/widgets.rb:175 msgid "" "\n" "<p>If AMaViS is not installed and you want to use it, it will be installed\n" @@ -732,13 +717,13 @@ "<p>만약 Amavis가 설치되지 않았고 사용하기를 원한다면, 자동으로 \n" "설치될 것 입니다.</p>\n" -#. checkbox label -#: src/include/mail/widgets.rb:186 +#. checkbox label +#: src/include/mail/widgets.rb:186 msgid "&Enable DKIM signing for outgoing mails." msgstr "발신 메일에 대한 DKIM 서명 활성화(&A)" -#. help text -#: src/include/mail/widgets.rb:190 +#. help text +#: src/include/mail/widgets.rb:190 msgid "" "\n" "<p><b>Enabling DKIM signig for outgoing mails.</b></p>\n" @@ -746,174 +731,161 @@ "\n" "<p><b>발신 메일에 대한 DKIM 서명을 활성화 중입니다.</b></p>\n" -#. help text -#: src/include/mail/widgets.rb:194 +#. help text +#: src/include/mail/widgets.rb:194 msgid "" "\n" "<p>Enabling DKIM for outgoing emails requires additional actions. A SSL key\n" -"will be generated for the 'mydomain' value defined in Postfix. A new " -"service\n" -"'submission' will be configured in Postfix. After this is set up you can " -"send\n" +"will be generated for the 'mydomain' value defined in Postfix. A new service\n" +"'submission' will be configured in Postfix. After this is set up you can send\n" "email with this service 'submission' from 'mynetworks' with enabled SASL\n" -"authentication. Only the emails sent by this new service will be signed " -"with\n" +"authentication. Only the emails sent by this new service will be signed with\n" "the domain key.</p>\n" msgstr "" "\n" "<p>보내는 전자 메일에 대해 DKIM을 활성화하려면 추가 작업이 필요합니다.\n" -"Postfix에 정의된 'mydomain' 값에 대해 SSL 키가 생성됩니다. Postfix에서 새 서" -"비스\n" +"Postfix에 정의된 'mydomain' 값에 대해 SSL 키가 생성됩니다. Postfix에서 새 서비스\n" "'submission'이 구성됩니다. 설정된 후\n" -"활성화된 SASL 인증을 사용하여 'mynetworks'에서 이 서비스 'submission'으로 전" -"자 메일을\n" +"활성화된 SASL 인증을 사용하여 'mynetworks'에서 이 서비스 'submission'으로 전자 메일을\n" "보낼 수 있습니다. 이 새 서비스에서 전송된 전자 메일만\n" "도메인 키로 서명됩니다.</p>\n" -#. help text -#: src/include/mail/widgets.rb:204 +#. help text +#: src/include/mail/widgets.rb:204 msgid "" "\n" "<p>The public key of the domain key needs to be offered by a Domain Name\n" "Service. The public key will be saved as a DNS TXT record\n" "in <b>/var/db/dkim/[mydomain].public.txt</b> and needs to be deployed to an\n" "according Domain Name Service. If there is a name service\n" -"running on this server, which is the authoritative server for that domain, " -"the\n" +"running on this server, which is the authoritative server for that domain, the\n" "public key will be added as a TXT record to that domain zone\n" "automatically.</p>\n" msgstr "" "\n" "<p>도메인 이름 서비스에서 도메인 키의 공개 키를\n" "제공해야 합니다. 공개 키는\n" -"<b>/var/db/dkim/[mydomain].public.txt</b>에 DNS TXT 레코드로 저장되며 도메인 " -"이름 서비스에 따라\n" +"<b>/var/db/dkim/[mydomain].public.txt</b>에 DNS TXT 레코드로 저장되며 도메인 이름 서비스에 따라\n" "배포되어야 합니다. 도메인에 대한 권한 있는\n" "서버인 이 서버에서 실행 중인 이름 서비스가 있는 경우\n" "공개 키가 자동으로 해당 도메인 영역에 TXT 레코드로\n" "추가됩니다.</p>\n" -#. help text -#: src/include/mail/widgets.rb:215 -msgid "" -"If you enable DKIM support, the virus scanning (AMaViS) will be enabled too." +#. help text +#: src/include/mail/widgets.rb:215 +msgid "If you enable DKIM support, the virus scanning (AMaViS) will be enabled too." msgstr "DKIM 지원을 활성화한 경우 바이러스 검사(AMaViS)도 활성화됩니다." -#. Translators: text entry label -#: src/include/mail/widgets.rb:224 +#. Translators: text entry label +#: src/include/mail/widgets.rb:224 msgid "&Server" msgstr "서버(&S)" -#. Translators: combo box label -#: src/include/mail/widgets.rb:234 +#. Translators: combo box label +#: src/include/mail/widgets.rb:234 msgid "&Protocol" msgstr "프로토콜(&P)" -#. Translators: text entry label -#: src/include/mail/widgets.rb:243 +#. Translators: text entry label +#: src/include/mail/widgets.rb:243 msgid "&Remote user name" msgstr "원격 사용자 이름(&E)" -#. Translators: text entry label -#: src/include/mail/widgets.rb:255 +#. Translators: text entry label +#: src/include/mail/widgets.rb:255 msgid "P&assword" msgstr "비밀번호(&A)" -#. Translators: text entry label -#: src/include/mail/widgets.rb:282 +#. Translators: text entry label +#: src/include/mail/widgets.rb:282 msgid "&Forward root's mail to" msgstr "루트 메일 전송 대상(&O)" -#. help text -#: src/include/mail/widgets.rb:286 +#. help text +#: src/include/mail/widgets.rb:286 msgid "" "<p>It is recommended to have a regular user account\n" "for the system administrator and redirect root's mail to this account.</p>" msgstr "" -"<p>시스템 관리자나 루트 메일을 이 계정으로 다시 보내기 위해서 정규적인 유저 " -"계정을\n" +"<p>시스템 관리자나 루트 메일을 이 계정으로 다시 보내기 위해서 정규적인 유저 계정을\n" "가지는 것을 추천합니다.</p>" -#. Translators: combo box label -#. /etc/sysconfig/postfix: POSTFIX_MDA -#: src/include/mail/widgets.rb:301 +#. Translators: combo box label +#. /etc/sysconfig/postfix: POSTFIX_MDA +#: src/include/mail/widgets.rb:301 msgid "&Delivery Mode" msgstr "전송 모드(&Y)" -#. help text -#: src/include/mail/widgets.rb:306 -msgid "" -"<p>The <b>delivery mode</b> is usually <b>Directly</b>, unless you do not " -"forward root's mail or want to access the mail via IMAP.</p>" -msgstr "" -"<p><b>전송 모드</b>는 루트 메일을 전달하거나 IMAP을 통해 메일에 액세스하지 않" -"을 경우 일반적으로 <b>직접</b>입니다.</p>" +#. help text +#: src/include/mail/widgets.rb:306 +msgid "<p>The <b>delivery mode</b> is usually <b>Directly</b>, unless you do not forward root's mail or want to access the mail via IMAP.</p>" +msgstr "<p><b>전송 모드</b>는 루트 메일을 전달하거나 IMAP을 통해 메일에 액세스하지 않을 경우 일반적으로 <b>직접</b>입니다.</p>" -#. LogView label. take a string from users? -#: src/include/mail/widgets.rb:345 +#. LogView label. take a string from users? +#: src/include/mail/widgets.rb:345 msgid "Reading the &User List" msgstr "사용자 목록 읽기(&U)" -#. LogView progress line -#: src/include/mail/widgets.rb:361 +#. LogView progress line +#: src/include/mail/widgets.rb:361 msgid "Local users" msgstr "로컬 사용자" -#. LogView progress line -#: src/include/mail/widgets.rb:377 +#. LogView progress line +#: src/include/mail/widgets.rb:377 msgid "LDAP users" msgstr "LDAP 사용자" -#. LogView progress line -#: src/include/mail/widgets.rb:398 +#. LogView progress line +#: src/include/mail/widgets.rb:398 msgid "NIS users" msgstr "NIS 사용자" -#. Translators: error popup -#. Translators: error popup -#: src/include/mail/widgets.rb:461 src/include/mail/widgets.rb:653 +#. Translators: error popup +#. Translators: error popup +#: src/include/mail/widgets.rb:461 src/include/mail/widgets.rb:653 msgid "The host name is incorrect" msgstr "호스트 명이 일치하지 않습니다." -#. Translators: error popup -#. Translators: error popup -#. Translators: error popup -#: src/include/mail/widgets.rb:701 src/include/mail/widgets.rb:749 -#: src/include/mail/widgets.rb:779 +#. Translators: error popup +#. Translators: error popup +#. Translators: error popup +#: src/include/mail/widgets.rb:701 src/include/mail/widgets.rb:749 +#: src/include/mail/widgets.rb:779 msgid "The user name format is incorrect." msgstr "사용자 이름 포맷이 일치하지 않습니다." -#. Translators: error popup -#. Validation -#: src/include/mail/widgets.rb:839 +#. Translators: error popup +#. Validation +#: src/include/mail/widgets.rb:839 msgid "Cannot use procmail when root's mail is not forwarded." msgstr "루트 메일을 forward 하지 않을때 procmail을 사용할 수 없습니다." -#. combo box choice: -#. deliver mail normally -#: src/include/mail/widgets.rb:863 +#. combo box choice: +#. deliver mail normally +#: src/include/mail/widgets.rb:863 msgid "Directly" msgstr "직접적으로" -#. combo box choice: -#. deliver mail through procmail -#: src/include/mail/widgets.rb:866 +#. combo box choice: +#. deliver mail through procmail +#: src/include/mail/widgets.rb:866 msgid "Through procmail" msgstr "promail 통해서" -#. combo box choice: -#. deliver mail to imap -imapd using LMTP -#: src/include/mail/widgets.rb:869 +#. combo box choice: +#. deliver mail to imap -imapd using LMTP +#: src/include/mail/widgets.rb:869 msgid "To IMAP Server" msgstr "대상 IMAP 서버" -#. Translators: popup message part, ends with a newline -#: src/modules/Mail.rb:216 +#. Translators: popup message part, ends with a newline +#: src/modules/Mail.rb:216 msgid "AMaViS, a virus scanner, will be installed.\n" msgstr "바이러스 스캐너인 AmaViS는 설치될 것입니다.\n" -#. error popup. -#: src/modules/Mail.rb:230 +#. error popup. +#: src/modules/Mail.rb:230 msgid "" "AMaViS needs a virus scanner such as ClamAV\n" "to do the actual scanning, but ClamAV was not found.\n" @@ -923,57 +895,57 @@ "같은 바이러스 스캐너가 필요하지만 ClamAV를 찾을 수 없습니다.\n" " 스캐너를 수동으로 구성하십시오." -#. Translators: popup message part, ends with a newline -#: src/modules/Mail.rb:249 +#. Translators: popup message part, ends with a newline +#: src/modules/Mail.rb:249 msgid "Fetchmail, a mail downloading utility, will be installed.\n" msgstr "메일 다운로딩 유틸리티인 Fetchmail은 설치될 것 입니다.\n" -#. Translators: popup message part, ends with a newline -#: src/modules/Mail.rb:258 +#. Translators: popup message part, ends with a newline +#: src/modules/Mail.rb:258 msgid "Dovecot IMAP server, will be installed.\n" msgstr "Dovecot IMAP 서버가 설치됩니다.\n" -#. Translators: dialog caption -#: src/modules/Mail.rb:302 +#. Translators: dialog caption +#: src/modules/Mail.rb:302 msgid "Initializing mail configuration" msgstr "메일 설정 초기화" -#. Translators: progress label -#. do not translate MTA -#: src/modules/Mail.rb:311 +#. Translators: progress label +#. do not translate MTA +#: src/modules/Mail.rb:311 msgid "Determining Mail Transport Agent (MTA)" msgstr "메일 전송 에이전트(MTA) 결정" -#. Translators: progress label -#: src/modules/Mail.rb:313 +#. Translators: progress label +#: src/modules/Mail.rb:313 msgid "Reading general settings" msgstr "일반 설정 불러오기" -#. Translators: progress label -#: src/modules/Mail.rb:315 +#. Translators: progress label +#: src/modules/Mail.rb:315 msgid "Reading masquerading settings" msgstr "머스커레이딩 설정 불러오기" -#. Translators: progress label -#: src/modules/Mail.rb:317 +#. Translators: progress label +#: src/modules/Mail.rb:317 msgid "Reading downloading settings" msgstr "다운로드 설정 불러오기" -#. Translators: progress label -#: src/modules/Mail.rb:319 +#. Translators: progress label +#: src/modules/Mail.rb:319 msgid "Reading alias tables" msgstr "앨리어스 테이블 읽기" -#. Translators: progress label -#. smtp-auth -#: src/modules/Mail.rb:322 +#. Translators: progress label +#. smtp-auth +#: src/modules/Mail.rb:322 msgid "Reading authentication settings..." msgstr "인증설정 정보를 읽고 있습니다..." -#. Translators: error message, -#. %1 is a file name, -#. %2 is a long file name - leave it on a separate line -#: src/modules/Mail.rb:496 +#. Translators: error message, +#. %1 is a file name, +#. %2 is a long file name - leave it on a separate line +#: src/modules/Mail.rb:496 msgid "" "Error reading file %1. The file must have\n" "a fixed format to be readable by YaST. For details, see\n" @@ -983,161 +955,161 @@ "파일은 YaST에서 읽을 수 있는 고정 형식이어야 합니다.\n" "자세한 내용은 %2을(를) 참조하십시오." -#. Translators: error message -#: src/modules/Mail.rb:823 +#. Translators: error message +#: src/modules/Mail.rb:823 msgid "Error writing the fetchmail configuration." msgstr "fetchmail 설정 기록 오류" -#. Translators: error message -#. Translators: error message -#: src/modules/Mail.rb:915 src/modules/Mail.rb:924 +#. Translators: error message +#. Translators: error message +#: src/modules/Mail.rb:915 src/modules/Mail.rb:924 msgid "Error writing file %1" msgstr "%1 파일 기록 오류" -#. Translators: error message -#: src/modules/Mail.rb:945 +#. Translators: error message +#: src/modules/Mail.rb:945 msgid "Error running config.postfix" msgstr "config.postfix를 실행하는 중 오류가 발생했습니다." -#. Translators: error message -#. Translators: error message -#. Translators: error message -#: src/modules/Mail.rb:960 src/modules/Mail.rb:978 src/modules/Mail.rb:995 +#. Translators: error message +#. Translators: error message +#. Translators: error message +#: src/modules/Mail.rb:960 src/modules/Mail.rb:978 src/modules/Mail.rb:995 msgid "Error starting service %1." msgstr "%1 서비스 시작 중 오류." -#. Translators: progress label -#: src/modules/Mail.rb:1014 +#. Translators: progress label +#: src/modules/Mail.rb:1014 msgid "Writing general settings" msgstr "일반 설정 기록" -#. Translators: progress label -#: src/modules/Mail.rb:1023 +#. Translators: progress label +#: src/modules/Mail.rb:1023 msgid "Writing masquerading settings" msgstr "머스커레이딩 설정 기록" -#. Translators: progress label -#: src/modules/Mail.rb:1031 +#. Translators: progress label +#: src/modules/Mail.rb:1031 msgid "Writing alias tables" msgstr "앨리어스 테이블 기록" -#. Write them unconditionally, because it is now possible to -#. enter them also in the Permanent mode. Bug #17417. -#. Translators: progress label -#: src/modules/Mail.rb:1043 +#. Write them unconditionally, because it is now possible to +#. enter them also in the Permanent mode. Bug #17417. +#. Translators: progress label +#: src/modules/Mail.rb:1043 msgid "Writing downloading settings" msgstr "다운로드 설정 기록" -#. Translators: progress label -#: src/modules/Mail.rb:1053 +#. Translators: progress label +#: src/modules/Mail.rb:1053 msgid "Writing authentication settings..." msgstr "인증 설정을 기록하고 있습니다..." -#. Translators: progress label -#: src/modules/Mail.rb:1062 +#. Translators: progress label +#: src/modules/Mail.rb:1062 msgid "Finishing writing configuration files" msgstr "설정 파일 기록 완료" -#. Translators: progress label -#: src/modules/Mail.rb:1070 +#. Translators: progress label +#: src/modules/Mail.rb:1070 msgid "Running Config Postfix" msgstr "Config Postfix 실행" -#. Translators: progress label -#: src/modules/Mail.rb:1080 +#. Translators: progress label +#: src/modules/Mail.rb:1080 msgid "Restarting services" msgstr "서비스 재시작" -#. Translators: dialog caption -#: src/modules/Mail.rb:1087 +#. Translators: dialog caption +#: src/modules/Mail.rb:1087 msgid "Saving mail configuration" msgstr "메일 설정 저장" -#. MTA used: other than Sendmail or Postfix -#: src/modules/Mail.rb:1282 +#. MTA used: other than Sendmail or Postfix +#: src/modules/Mail.rb:1282 msgid "Other" msgstr "기타" -#. summary: connection type -#: src/modules/Mail.rb:1289 +#. summary: connection type +#: src/modules/Mail.rb:1289 msgid "Permanent" msgstr "전용선" -#. summary: connection type -#: src/modules/Mail.rb:1292 +#. summary: connection type +#: src/modules/Mail.rb:1292 msgid "Dial-up" msgstr "전화접속" -#. summary: connection type -#: src/modules/Mail.rb:1295 +#. summary: connection type +#: src/modules/Mail.rb:1295 msgid "None" msgstr "없음" -#. summary header; mail transfer agent -#: src/modules/Mail.rb:1301 +#. summary header; mail transfer agent +#: src/modules/Mail.rb:1301 msgid "MTA" msgstr "MTA" -#. summary header -#: src/modules/Mail.rb:1304 +#. summary header +#: src/modules/Mail.rb:1304 msgid "Connection Type" msgstr "연결 타입" -#. summary header -#: src/modules/Mail.rb:1308 +#. summary header +#: src/modules/Mail.rb:1308 msgid "Outgoing Mail Server" msgstr "발송 메일 서버" -#. summary header; the "From: foo@bar.com" mail header -#: src/modules/Mail.rb:1315 +#. summary header; the "From: foo@bar.com" mail header +#: src/modules/Mail.rb:1315 msgid "From Header" msgstr "보내는 사람" -#. summary item -#: src/modules/Mail.rb:1321 +#. summary item +#: src/modules/Mail.rb:1321 msgid "Local Domains" msgstr "로컬 도메인" -#. summary item -#: src/modules/Mail.rb:1326 +#. summary item +#: src/modules/Mail.rb:1326 msgid "Masquerade Other Domains" msgstr "다른 도메인 머스커레이드" -#. summary item -#: src/modules/Mail.rb:1331 +#. summary item +#: src/modules/Mail.rb:1331 msgid "Masquerade Users" msgstr "사용자 머스커레이드" -#. summary header -#: src/modules/Mail.rb:1334 +#. summary header +#: src/modules/Mail.rb:1334 msgid "Accept remote SMTP connections" msgstr "원격 SMTP 연결 수락" -#: src/modules/Mail.rb:1335 src/modules/Mail.rb:1338 src/modules/Mail.rb:1341 +#: src/modules/Mail.rb:1335 src/modules/Mail.rb:1338 src/modules/Mail.rb:1341 msgid "Yes" msgstr "예" -#. summary header -#: src/modules/Mail.rb:1337 +#. summary header +#: src/modules/Mail.rb:1337 msgid "Use AMaViS" msgstr "AMaViS 사용" -#. summary header -#: src/modules/Mail.rb:1340 +#. summary header +#: src/modules/Mail.rb:1340 msgid "Use DKIM" msgstr "DKIM 사용" -#. summary item -#: src/modules/Mail.rb:1343 +#. summary item +#: src/modules/Mail.rb:1343 msgid "Fetchmail" msgstr "Fetchmail " -#. summary item -#: src/modules/Mail.rb:1356 +#. summary item +#: src/modules/Mail.rb:1356 msgid "Virtual Users" msgstr "가상 사용자" -#. summary item -#: src/modules/Mail.rb:1361 +#. summary item +#: src/modules/Mail.rb:1361 msgid "Authentication" msgstr "인증" Modified: branches/SLE12-SP3/yast/ko/po/migration.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/migration.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/migration.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,34 +14,30 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. TRANSLATORS: dialog title -#: src/lib/migration/finish_dialog.rb:49 +#. TRANSLATORS: dialog title +#: src/lib/migration/finish_dialog.rb:49 msgid "Migration Finished" msgstr "마이그레이션 완료" -#. TRANSLATORS: popup messsage -#: src/lib/migration/finish_dialog.rb:67 +#. TRANSLATORS: popup messsage +#: src/lib/migration/finish_dialog.rb:67 msgid "The system will be restarted now to activate the changes." msgstr "시스템이 변경 사항 활성화를 위해 다시 시작됩니다." -#. TRANSLATORS: a push button label, pressing the button will restart -#. the system immediately -#: src/lib/migration/finish_dialog.rb:70 +#. TRANSLATORS: a push button label, pressing the button will restart +#. the system immediately +#: src/lib/migration/finish_dialog.rb:70 msgid "&Restart Now" msgstr "지금 재시작(&R)" -#. TRANSLATORS: a short help text (the details are directly in the dialog) -#: src/lib/migration/finish_dialog.rb:84 -msgid "" -"<p><b>Finish</b> will close the migration and you should restart the system " -"as soon as possible.</b>" -msgstr "" -"<p><b>완료</b>를 누르면 마이그레이션이 종료되고 최대한 빨리 시스템을 재시작해" -"야 합니다.</b>" +#. TRANSLATORS: a short help text (the details are directly in the dialog) +#: src/lib/migration/finish_dialog.rb:84 +msgid "<p><b>Finish</b> will close the migration and you should restart the system as soon as possible.</b>" +msgstr "<p><b>완료</b>를 누르면 마이그레이션이 종료되고 최대한 빨리 시스템을 재시작해야 합니다.</b>" -#. TRANSLATORS: The final congratulation displayed at the end of migration, -#. in RichText format, %s = URL link to the SUSE home page -#: src/lib/migration/finish_dialog.rb:101 +#. TRANSLATORS: The final congratulation displayed at the end of migration, +#. in RichText format, %s = URL link to the SUSE home page +#: src/lib/migration/finish_dialog.rb:101 msgid "" "<h2>Congratulations!</h2><br>\n" "<p>You have just successfully finished the on-line migration.<br>\n" @@ -63,8 +59,8 @@ "<p>      \n" "SUSE 개발 팀</p>" -#. TRANSLATORS: popup question, confirm installing the available updates now -#: src/lib/migration/main_workflow.rb:169 +#. TRANSLATORS: popup question, confirm installing the available updates now +#: src/lib/migration/main_workflow.rb:169 msgid "" "There are some online updates available to installation,\n" "it is recommended to install all updates before proceeding.\n" @@ -76,10 +72,10 @@ "\n" "지금 업데이트를 설치하시겠습니까?" -#. TRANSLATORS: an error message, the migration to a new service pack failed -#. or was aborted, the system is in partly migrated state and should be restored -#. from a snapshot or backup -#: src/lib/migration/main_workflow.rb:216 +#. TRANSLATORS: an error message, the migration to a new service pack failed +#. or was aborted, the system is in partly migrated state and should be restored +#. from a snapshot or backup +#: src/lib/migration/main_workflow.rb:216 msgid "" "The migration to the new service pack has failed. The system is most\n" "likely in an inconsistent state.\n" @@ -95,51 +91,45 @@ "부팅 메뉴에서 스냅샷 선택)하거나 백업에서 시스템을\n" "복원하는 것이 좋습니다." -#. create a filesystem snapshot -#. @param [Symbol, String] type the type of the snapshot (:single, :pre or :post) -#. @param [String] desc description of the snapshot for users -#. @param [Fixnum] pre_id id of the respective "pre" snapshot (needed -#. only for "post" type snapshots) -#. @return [Fixnum,nil] id of the created snapshot (nil if failed) -#: src/lib/migration/main_workflow.rb:278 +#. create a filesystem snapshot +#. @param [Symbol, String] type the type of the snapshot (:single, :pre or :post) +#. @param [String] desc description of the snapshot for users +#. @param [Fixnum] pre_id id of the respective "pre" snapshot (needed +#. only for "post" type snapshots) +#. @return [Fixnum,nil] id of the created snapshot (nil if failed) +#: src/lib/migration/main_workflow.rb:278 msgid "Failed to create a filesystem snapshot." msgstr "파일 시스템 스냅샷을 생성하지 못했습니다." -#. TRANSLATORS: a summary heading -#: src/lib/migration/proposal_client.rb:83 +#. TRANSLATORS: a summary heading +#: src/lib/migration/proposal_client.rb:83 msgid "Migration Summary" msgstr "마이그레이션 요약" -#. TRANSLATORS: a menu entry -#: src/lib/migration/proposal_client.rb:85 +#. TRANSLATORS: a menu entry +#: src/lib/migration/proposal_client.rb:85 msgid "&Migration Summary" msgstr "마이그레이션 요약(&M)" -#. TRANSLATORS: A warning message displayed in the migration proposal -#. %{name} is a repository name, %{link} is a hidden internal identifier -#: src/lib/migration/proposal_client.rb:152 -msgid "" -"Warning: Repository <b>%{name}</b> is obsolete and should be excluded from " -"migration.<br>It is highly recommended to disable this repository. (Disable</a>)" -msgstr "" -"경고: 리포지토리 <b>%{name}</b>이(가) 오래되었기 때문에 마이그레이션에서 제외" -"해야 합니다.<br>이 리포지토리를 비활성화하는 것이 좋습니다. (비활성화</a>)" +#. TRANSLATORS: A warning message displayed in the migration proposal +#. %{name} is a repository name, %{link} is a hidden internal identifier +#: src/lib/migration/proposal_client.rb:152 +msgid "Warning: Repository <b>%{name}</b> is obsolete and should be excluded from migration.<br>It is highly recommended to disable this repository. (Disable</a>)" +msgstr "경고: 리포지토리 <b>%{name}</b>이(가) 오래되었기 때문에 마이그레이션에서 제외해야 합니다.<br>이 리포지토리를 비활성화하는 것이 좋습니다. (비활성화</a>)" -#. TRANSLATORS: help text -#: src/lib/migration/proposal_client.rb:190 +#. TRANSLATORS: help text +#: src/lib/migration/proposal_client.rb:190 msgid "<p>This is an overview of the product migration.</p>\n" msgstr "<p>제품 마이그레이션에 대한 개요입니다.</p>\n" -#. @return [String] translated headline -#: src/lib/migration/proposal_store.rb:45 +#. @return [String] translated headline +#: src/lib/migration/proposal_store.rb:45 msgid "Migration proposal" msgstr "마이그레이션 제안" -#. returns single list of modules presentation order or list of tabs with -#. list of modules -#: src/lib/migration/proposal_store.rb:63 +#. returns single list of modules presentation order or list of tabs with +#. list of modules +#: src/lib/migration/proposal_store.rb:63 msgid "" "<p>\n" "To start online migration, press <b>Next</b>.\n" Modified: branches/SLE12-SP3/yast/ko/po/multipath.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/multipath.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/multipath.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,190 +14,180 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xmultipath module -#: src/clients/multipath.rb:53 +#. Command line help text for the Xmultipath module +#: src/clients/multipath.rb:53 msgid "Configuration of multipath" msgstr "다중경로 구성" -#. Multipath summary dialog caption -#. Initialization dialog caption -#: src/include/multipath/complex.rb:54 src/include/multipath/wizards.rb:70 +#. Multipath summary dialog caption +#. Initialization dialog caption +#: src/include/multipath/complex.rb:54 src/include/multipath/wizards.rb:70 msgid "Multipath Configuration" msgstr "다중 경로 구성" -#: src/include/multipath/complex.rb:67 +#: src/include/multipath/complex.rb:67 msgid "Do ¬ use Multipath" msgstr "다중 경로 사용 안 함(&N)" -#: src/include/multipath/complex.rb:75 +#: src/include/multipath/complex.rb:75 msgid "&Use Multipath" msgstr "다중 경로 사용(&U)" -#: src/include/multipath/complex.rb:90 +#: src/include/multipath/complex.rb:90 msgid "Blacklist" msgstr "블랙리스트" -#: src/include/multipath/complex.rb:95 src/include/multipath/complex.rb:120 -#: src/include/multipath/complex.rb:146 +#: src/include/multipath/complex.rb:95 src/include/multipath/complex.rb:120 +#: src/include/multipath/complex.rb:146 msgid "Item" msgstr "항목" -#: src/include/multipath/complex.rb:95 src/include/multipath/complex.rb:120 -#: src/include/multipath/complex.rb:146 +#: src/include/multipath/complex.rb:95 src/include/multipath/complex.rb:120 +#: src/include/multipath/complex.rb:146 msgid "Value" msgstr "값" -#: src/include/multipath/complex.rb:115 +#: src/include/multipath/complex.rb:115 msgid "Blacklist Exceptions" msgstr "블랙리스트 예외" -#. will be initiated in Read_Defaults.. -#: src/include/multipath/complex.rb:141 +#. will be initiated in Read_Defaults.. +#: src/include/multipath/complex.rb:141 msgid "Defaults" msgstr "기본값" -#: src/include/multipath/complex.rb:164 +#: src/include/multipath/complex.rb:164 msgid "Devices" msgstr "장치" -#: src/include/multipath/complex.rb:169 +#: src/include/multipath/complex.rb:169 msgid "vendor" msgstr "제조업체" -#: src/include/multipath/complex.rb:169 +#: src/include/multipath/complex.rb:169 msgid "product" msgstr "제품" -#: src/include/multipath/complex.rb:188 +#: src/include/multipath/complex.rb:188 msgid "Multipaths" msgstr "다중 경로" -#: src/include/multipath/complex.rb:195 +#: src/include/multipath/complex.rb:195 msgid "alias" msgstr "별칭" -#: src/include/multipath/complex.rb:195 src/include/multipath/complex.rb:2282 -#: src/include/multipath/complex.rb:2953 +#: src/include/multipath/complex.rb:195 src/include/multipath/complex.rb:2282 +#: src/include/multipath/complex.rb:2953 msgid "wwid" msgstr "wwid" -#: src/include/multipath/complex.rb:213 +#: src/include/multipath/complex.rb:213 msgid "Configure Defaults" msgstr "기본값 구성" -#: src/include/multipath/complex.rb:214 +#: src/include/multipath/complex.rb:214 msgid "Configure Devices" msgstr "장치 구성" -#: src/include/multipath/complex.rb:216 +#: src/include/multipath/complex.rb:216 msgid "Configure Blacklist" msgstr "블랙리스트 구성" -#: src/include/multipath/complex.rb:221 +#: src/include/multipath/complex.rb:221 msgid "Configure Blacklist Exceptions" msgstr "블랙리스트 예외 구성" -#: src/include/multipath/complex.rb:241 src/include/multipath/complex.rb:249 -#: src/modules/Multipath.rb:378 src/modules/Multipath.rb:387 -#: src/modules/Multipath.rb:398 +#: src/include/multipath/complex.rb:241 src/include/multipath/complex.rb:249 +#: src/modules/Multipath.rb:378 src/modules/Multipath.rb:387 +#: src/modules/Multipath.rb:398 msgid "Status" msgstr "상태" -#. Disable configure tab during installation -#: src/include/multipath/complex.rb:242 src/include/multipath/complex.rb:249 -#: src/modules/Multipath.rb:359 src/modules/Multipath.rb:392 -#: src/modules/Multipath.rb:411 src/modules/Multipath.rb:455 -#: src/modules/Multipath.rb:481 src/modules/Multipath.rb:506 -#: src/modules/Multipath.rb:531 +#. Disable configure tab during installation +#: src/include/multipath/complex.rb:242 src/include/multipath/complex.rb:249 +#: src/modules/Multipath.rb:359 src/modules/Multipath.rb:392 +#: src/modules/Multipath.rb:411 src/modules/Multipath.rb:455 +#: src/modules/Multipath.rb:481 src/modules/Multipath.rb:506 +#: src/modules/Multipath.rb:531 msgid "Configure" msgstr "구성" -#. check if user input is legal, and popup necessary information -#. check if user input is legal, and popup necessary information -#: src/include/multipath/complex.rb:1061 -#: src/include/multipath/complex.rb:3256 +#. check if user input is legal, and popup necessary information +#. check if user input is legal, and popup necessary information +#: src/include/multipath/complex.rb:1061 src/include/multipath/complex.rb:3256 msgid "Illegal parameters:\n" msgstr "잘못된 파라미터:\n" -#. duplicated configuraton checking -#. duplicated configuraton checking -#: src/include/multipath/complex.rb:1133 -#: src/include/multipath/complex.rb:1999 -#: src/include/multipath/complex.rb:2667 -#: src/include/multipath/complex.rb:3327 +#. duplicated configuraton checking +#. duplicated configuraton checking +#: src/include/multipath/complex.rb:1133 src/include/multipath/complex.rb:1999 +#: src/include/multipath/complex.rb:2667 src/include/multipath/complex.rb:3327 msgid "Duplicated configuration." msgstr "구성이 중복되었습니다." -#. used for store undecided input -#. used for store undecided input -#: src/include/multipath/complex.rb:1178 -#: src/include/multipath/complex.rb:1224 -#: src/include/multipath/complex.rb:1242 -#: src/include/multipath/complex.rb:3390 -#: src/include/multipath/complex.rb:3435 -#: src/include/multipath/complex.rb:3453 +#. used for store undecided input +#. used for store undecided input +#: src/include/multipath/complex.rb:1178 src/include/multipath/complex.rb:1224 +#: src/include/multipath/complex.rb:1242 src/include/multipath/complex.rb:3390 +#: src/include/multipath/complex.rb:3435 src/include/multipath/complex.rb:3453 msgid "Show Details" msgstr "상세 보기" -#. do not do with number id -#: src/include/multipath/complex.rb:1441 +#. do not do with number id +#: src/include/multipath/complex.rb:1441 msgid "Illegal parameter:" msgstr "잘못된 파라미터:" -#. devices section -#. if value is empty, do not write name into configuration file. -#: src/include/multipath/complex.rb:1891 -#: src/include/multipath/complex.rb:2559 +#. devices section +#. if value is empty, do not write name into configuration file. +#: src/include/multipath/complex.rb:1891 src/include/multipath/complex.rb:2559 msgid "Illegal parameters:" msgstr "잘못된 파라미터:" -#. do not handle, `ok will do with the value -#. do not handle, `ok will do with the value -#: src/include/multipath/complex.rb:2025 -#: src/include/multipath/complex.rb:2031 -#: src/include/multipath/complex.rb:2270 -#: src/include/multipath/complex.rb:2693 -#: src/include/multipath/complex.rb:2699 -#: src/include/multipath/complex.rb:2941 +#. do not handle, `ok will do with the value +#. do not handle, `ok will do with the value +#: src/include/multipath/complex.rb:2025 src/include/multipath/complex.rb:2031 +#: src/include/multipath/complex.rb:2270 src/include/multipath/complex.rb:2693 +#: src/include/multipath/complex.rb:2699 src/include/multipath/complex.rb:2941 msgid "item" msgstr "항목" -#. duplicated configuraton checking -#: src/include/multipath/complex.rb:3341 +#. duplicated configuraton checking +#: src/include/multipath/complex.rb:3341 msgid "Duplicated configuration" msgstr "복제된 구성" -#: src/include/multipath/complex.rb:3605 +#: src/include/multipath/complex.rb:3605 msgid "Can not find /sbin/multipath" msgstr "/sbin/multipath를 찾을 수 없습니다." -#. "multipath -l" may returns "" to bash -#: src/include/multipath/complex.rb:3630 +#. "multipath -l" may returns "" to bash +#: src/include/multipath/complex.rb:3630 msgid "Use multipath failed:" msgstr "실패한 다중 경로 사용:" -#: src/include/multipath/complex.rb:3636 +#: src/include/multipath/complex.rb:3636 msgid "* Cannot enable multipathd." msgstr "* multipathd를 활성화할 수 없습니다." -#: src/include/multipath/complex.rb:3646 +#: src/include/multipath/complex.rb:3646 msgid "* Cannot start multipathd." msgstr "* multipathd를 시작할 수 없습니다." -#: src/include/multipath/complex.rb:3665 +#: src/include/multipath/complex.rb:3665 msgid "Do not use multipath failed:" msgstr "실패한 다중 경로 사용 안 함:" -#: src/include/multipath/complex.rb:3671 +#: src/include/multipath/complex.rb:3671 msgid "* Cannot stop multipath." msgstr "* 다중 경로를 중지할 수 없습니다." -#: src/include/multipath/complex.rb:3681 +#: src/include/multipath/complex.rb:3681 msgid "* Cannot disable multipathd." msgstr "* multipathd를 비활성화할 수 없습니다." -#. Read dialog help 1/2 -#: src/include/multipath/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/multipath/helps.rb:36 msgid "" "<p><b><big>Initializing Multipath Configuration</big></b><br>\n" "</p>\n" @@ -205,8 +195,8 @@ "<p><b><big>다중 경로 구성 초기화</big></b><br>\n" "</p>\n" -#. Write dialog help 1/2 -#: src/include/multipath/helps.rb:40 +#. Write dialog help 1/2 +#: src/include/multipath/helps.rb:40 msgid "" "<p><b><big>Saving Multipath Configuration</big></b><br>\n" "</p>\n" @@ -214,335 +204,271 @@ "<p><b><big>다중 경로 구성 저장</big></b><br>\n" "</p>\n" -#. dialog help for Status help -#: src/include/multipath/helps.rb:44 +#. dialog help for Status help +#: src/include/multipath/helps.rb:44 msgid "" "<p><b><big>Multipath Status</big></b><br>\n" "\t\t\tStart or stop multipathd, check the multipath information.<br><br>\n" "\n" "\t\t\t<b><big>Stop/Start Multipathd</big></b><br>\n" -"\t\t\tClick <b>\"Use Multipath\"</b> to start multipathd. Click <b>\"Do not " -"use Multipath\"</b> to stop multipathd.<br>\n" -"\t\t\tMultipath status information can still be displayed when multipathd " -"stopped.<br><br>\n" +"\t\t\tClick <b>\"Use Multipath\"</b> to start multipathd. Click <b>\"Do not use Multipath\"</b> to stop multipathd.<br>\n" +"\t\t\tMultipath status information can still be displayed when multipathd stopped.<br><br>\n" "\n" "\t\t\t<b><big>Configure Multipath</big></b><br>\n" -"\t\t\tClick <b>Configure</b> Tab to make the multipath configurations.<br>\n" +"\t\t\tClick <b>Configure</b> Tab to make the multipath configurations.<br></p>\n" msgstr "" "<p><b><big>다중 경로 상태</big></b><br>\n" "\t\t\tmultipathd를 시작하거나 중지하고 다중 경로 정보를 확인합니다.<br><br>\n" "\n" "\t\t\t<b><big>Multipathd 중지/시작</big></b><br>\n" -"\t\t\tmultipathd를 시작하려면 <b>\"다중 경로 사용\"</b>을 클릭합니다. " -"multipathd를 중지하려면 <b>\"다중 경로 사용 안 함\"</b>을 클릭합니다.<br>\n" -"\t\t\t다중 경로 상태 정보는 multipathd가 중지될 때에도 표시될 수 있습니다." -"<br><br>\n" +"\t\t\tmultipathd를 시작하려면 <b>\"다중 경로 사용\"</b>을 클릭합니다. multipathd를 중지하려면 <b>\"다중 경로 사용 안 함\"</b>을 클릭합니다.<br>\n" +"\t\t\t다중 경로 상태 정보는 multipathd가 중지될 때에도 표시될 수 있습니다.<br><br>\n" "\n" "\t\t\t<b><big>다중 경로 구성</big></b><br>\n" "\t\t\t다중 경로 구성을 설정하려면 <b>구성</b> 탭을 클릭합니다.<br></p>\n" -#. dialog help for Configure tab -#: src/include/multipath/helps.rb:56 +#. dialog help for Configure tab +#: src/include/multipath/helps.rb:56 msgid "" "<p><b><big>Configuration</big></b><br>\n" -"\t\t\tAll the content of /etc/multipath.conf can be configured here. There " -"are four sections in the configuration file:\n" -"\t\t\t<b>multipaths</b>, <b>defaults</b>, <b>blacklist</b>, " -"<b>blacklist_exception</b>, <b>devices.</b><br><br>\n" +"\t\t\tAll the content of /etc/multipath.conf can be configured here. There are four sections in the configuration file:\n" +"\t\t\t<b>multipaths</b>, <b>defaults</b>, <b>blacklist</b>, <b>blacklist_exception</b>, <b>devices.</b><br><br>\n" "\t\t\t<b>Multipaths:</b> list of multipaths finest-grained settings.<br>\n" "\t\t\t<b>Defaults:</b> multipath-tools default settings.<br>\n" -"\t\t\tClick <b>\"Configure Defaults\"</b> button to configure defaults " -"settings.<br>\n" -"\t\t\t<b>Blacklist:</b> list of device names to be discard as not multipath " -"candidates.<br>\n" -"\t\t\tClick <b>\"Configure Blacklist\"</b> button to configure blacklist " -"settings.<br>\n" -"\t\t\t<b>Blacklist Exceptions:</b> list of device names to be excluded from " -"blacklist.<br>\n" -"\t\t\tClick <b>\"Configure Blacklist Exceptions\"</b> button to configure " -"blacklist_exceptions settings.<br>\n" -"\t\t\t<b>Devices:</b> list of per storage controller settings. Overrides " -"default settings, overridden by per multipath settings.<br>\n" -"\t\t\tClick <b>\"Configure devices\"</b> button to configure devices " -"settings.<br><br>\n" -"\t\t\tClick <b>\"Finish\"</b> button to save and update the configurations." -"<br><br></p>\n" +"\t\t\tClick <b>\"Configure Defaults\"</b> button to configure defaults settings.<br>\n" +"\t\t\t<b>Blacklist:</b> list of device names to be discard as not multipath candidates.<br>\n" +"\t\t\tClick <b>\"Configure Blacklist\"</b> button to configure blacklist settings.<br>\n" +"\t\t\t<b>Blacklist Exceptions:</b> list of device names to be excluded from blacklist.<br>\n" +"\t\t\tClick <b>\"Configure Blacklist Exceptions\"</b> button to configure blacklist_exceptions settings.<br>\n" +"\t\t\t<b>Devices:</b> list of per storage controller settings. Overrides default settings, overridden by per multipath settings.<br>\n" +"\t\t\tClick <b>\"Configure devices\"</b> button to configure devices settings.<br><br>\n" +"\t\t\tClick <b>\"Finish\"</b> button to save and update the configurations.<br><br></p>\n" msgstr "" "<p><b><big>구성</big></b><br>\n" -"\t\t\t/etc/multipath.conf의 모든 컨텐트를 여기서 구성할 수 있습니다. 구성 파" -"일에는 다음 네 개의 섹션이 있습니다.\n" -"\t\t\t<b>multipaths</b>, <b>defaults</b>, <b>blacklist</b>, " -"<b>blacklist_exception</b>, <b>devices</b><br><br>\n" +"\t\t\t/etc/multipath.conf의 모든 컨텐트를 여기서 구성할 수 있습니다. 구성 파일에는 다음 네 개의 섹션이 있습니다.\n" +"\t\t\t<b>multipaths</b>, <b>defaults</b>, <b>blacklist</b>, <b>blacklist_exception</b>, <b>devices</b><br><br>\n" "\t\t\t<b>Multipaths:</b> 다중 경로 세부 설정 목록입니다.<br>\n" "\t\t\t<b>Defaults:</b> multipath-tools 기본 설정입니다.<br>\n" -"\t\t\t기본 설정을 구성하려면 <b>\"기본값 구성\"</b> 버튼을 클릭하십시오." -"<br>\n" -"\t\t\t<b>Blacklist:</b> 다중 경로 후보가 아닌 것으로 삭제할 장치 이름 목록입" -"니다.<br>\n" -"\t\t\t블랙리스트 설정을 구성하려면 <b>\"블랙리스트 구성\"</b> 버튼을 클릭하십" -"시오.<br>\n" -"\t\t\t<b>Blacklist Exceptions:</b> 블랙리스트에서 제외할 장치 이름 목록입니" -"다.<br>\n" -"\t\t\tblacklist_exceptions 설정을 구성하려면 <b>\"블랙리스트 예외 구성\"</b> " -"버튼을 클릭하십시오.<br>\n" -"\t\t\t<b>Devices:</b> 저장소 컨트롤러별 설정 목록입니다. 기본 설정을 무효화하" -"며, 다중 경로별 설정에 의해 무효화됩니다.<br>\n" -"\t\t\t장치 설정을 구성하려면 <b>\"장치 구성\"</b> 버튼을 클릭하십시오." -"<br><br>\n" -"\t\t\t구성을 저장 및 업데이트하려면 <b>\"완료\"</b> 버튼을 클릭하십시오." -"<br><br></p>\n" +"\t\t\t기본 설정을 구성하려면 <b>\"기본값 구성\"</b> 버튼을 클릭하십시오.<br>\n" +"\t\t\t<b>Blacklist:</b> 다중 경로 후보가 아닌 것으로 삭제할 장치 이름 목록입니다.<br>\n" +"\t\t\t블랙리스트 설정을 구성하려면 <b>\"블랙리스트 구성\"</b> 버튼을 클릭하십시오.<br>\n" +"\t\t\t<b>Blacklist Exceptions:</b> 블랙리스트에서 제외할 장치 이름 목록입니다.<br>\n" +"\t\t\tblacklist_exceptions 설정을 구성하려면 <b>\"블랙리스트 예외 구성\"</b> 버튼을 클릭하십시오.<br>\n" +"\t\t\t<b>Devices:</b> 저장소 컨트롤러별 설정 목록입니다. 기본 설정을 무효화하며, 다중 경로별 설정에 의해 무효화됩니다.<br>\n" +"\t\t\t장치 설정을 구성하려면 <b>\"장치 구성\"</b> 버튼을 클릭하십시오.<br><br>\n" +"\t\t\t구성을 저장 및 업데이트하려면 <b>\"완료\"</b> 버튼을 클릭하십시오.<br><br></p>\n" -#. dialog help for defaults section configure tab 1/3 -#: src/include/multipath/helps.rb:72 +#. dialog help for defaults section configure tab 1/3 +#: src/include/multipath/helps.rb:72 msgid "" "<p><b><big>Defaults Configuration</big></b><br>\n" "\t\t\tGlobal default settings can be configured and cleared here.<br>\n" -"\t\t\tAny default setting here will take effect in all multipath " -"configurations, unless a corresponding local setting overwrites it.<br>\n" -"\t\t\tIf a default setting here is cleared, multipath will take its own " -"value as default setting.<br></p>\n" +"\t\t\tAny default setting here will take effect in all multipath configurations, unless a corresponding local setting overwrites it.<br>\n" +"\t\t\tIf a default setting here is cleared, multipath will take its own value as default setting.<br></p>\n" msgstr "" "<p><b><big>기본 구성</big></b><br>\n" "\t\t\t글로벌 기본 설정은 여기에서 구성 및 폐기될 수 있습니다.<br>\n" -"\t\t\t여기에 있는 모든 기본 설정은 해당 로컬 설정이 덮어쓰지 않는 한 다중 경" -"로 구성에 모두 적용됩니다.<br>\n" -"\t\t\t여기에 있는 기본 설정이 삭제되면 다중 경로는 자체 값을 기본 설정으로 갖" -"게 됩니다.<br></p>\n" +"\t\t\t여기에 있는 모든 기본 설정은 해당 로컬 설정이 덮어쓰지 않는 한 다중 경로 구성에 모두 적용됩니다.<br>\n" +"\t\t\t여기에 있는 기본 설정이 삭제되면 다중 경로는 자체 값을 기본 설정으로 갖게 됩니다.<br></p>\n" -#. dialog help for blacklist section configure tab 1/3 -#: src/include/multipath/helps.rb:79 +#. dialog help for blacklist section configure tab 1/3 +#: src/include/multipath/helps.rb:79 msgid "" "<p><b><big>Blacklist Configuration</big></b><br>\n" -"\t\t\tDevice names listed here can be discarded as not multipath candidates." -"<br>\n" -"\t\t\tThere are three methods to identify a device name: <b>wwid</b>, " -"<b>devnode</b>, <b>device</b>.<br><br>\n" -"\t\t\t<b>wwid</b>: The world wide ID identifying the device in blacklist." -"<br>\n" -"\t\t\t<b>devnode</b>: Regular expression can be used here to identify device " -"names in udev_dir (default in directory /dev). Common device names are " -"cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop.<br>\n" -"\t\t\t<b>device</b>: Used to identify a specific storage controller in " -"blacklist. A device can be specified by vendor and product name.<br>\n" +"\t\t\tDevice names listed here can be discarded as not multipath candidates.<br>\n" +"\t\t\tThere are three methods to identify a device name: <b>wwid</b>, <b>devnode</b>, <b>device</b>.<br><br>\n" +"\t\t\t<b>wwid</b>: The world wide ID identifying the device in blacklist.<br>\n" +"\t\t\t<b>devnode</b>: Regular expression can be used here to identify device names in udev_dir (default in directory /dev). Common device names are cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop.<br>\n" +"\t\t\t<b>device</b>: Used to identify a specific storage controller in blacklist. A device can be specified by vendor and product name.<br>\n" "</p>" msgstr "" "<p><b><big>블랙리스트 구성</big></b><br>\n" -"\t\t\t여기에 나열된 장치 이름은 다중 경로가 아닌 후보로 폐기될 수 있습니다." -"<br>\n" -"\t\t\t장치 이름을 식별하는 데는 <b>wwid</b>, <b>devnode</b>, <b>장치</b>의 " -"세 가지 방법이 있습니다.<br><br>\n" +"\t\t\t여기에 나열된 장치 이름은 다중 경로가 아닌 후보로 폐기될 수 있습니다.<br>\n" +"\t\t\t장치 이름을 식별하는 데는 <b>wwid</b>, <b>devnode</b>, <b>장치</b>의 세 가지 방법이 있습니다.<br><br>\n" "\t\t\t<b>wwid</b>: 블랙리스트에서 장치를 식별하는 World Wide ID입니다.<br>\n" -"\t\t\t<b>devnode</b>: udev_dir(기본값은 directory /dev에 있음)에서 장치 이름" -"을 식별하기 위해 여기에서 정규식을 사용할 수 있습니다. 일반 장치 이름은 " -"cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop입니다.<br>\n" -"\t\t\t<b>장치</b>: 블랙리스트에서 특정 저장소 컨트롤러를 식별하는 데 사용됩니" -"다. 장치는 제조업체와 제품 이름별로 지정할 수 있습니다.<br>\n" +"\t\t\t<b>devnode</b>: udev_dir(기본값은 directory /dev에 있음)에서 장치 이름을 식별하기 위해 여기에서 정규식을 사용할 수 있습니다. 일반 장치 이름은 cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop입니다.<br>\n" +"\t\t\t<b>장치</b>: 블랙리스트에서 특정 저장소 컨트롤러를 식별하는 데 사용됩니다. 장치는 제조업체와 제품 이름별로 지정할 수 있습니다.<br>\n" "</p>" -#. dialog help for blacklist_exception section configure tab 1/3 -#: src/include/multipath/helps.rb:89 +#. dialog help for blacklist_exception section configure tab 1/3 +#: src/include/multipath/helps.rb:89 msgid "" "<p><b><big>Blacklist Exceptions Configuration</big></b><br>\n" "\t\t\tDevice names listed here are excluded from blacklist.<br>\n" -"\t\t\tThere are three methods to identify a device name: <b>wwid</b>, " -"<b>devnode</b>, <b>device</b>.<br><br>\n" -"\t\t\t<b>wwid</b>: The world wide ID identifying the device excepted from " -"blacklist.<br>\n" -"\t\t\t<b>devnode</b>: Regular expression can be used here to identify device " -"names in udev_dir (default in directory /dev). Common device names are " -"cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop.<br>\n" -"\t\t\t<b>device</b>: Used to identify a specific storage controller excepted " -"from blacklist. A device can be specified by vendor and product name.<br>\n" +"\t\t\tThere are three methods to identify a device name: <b>wwid</b>, <b>devnode</b>, <b>device</b>.<br><br>\n" +"\t\t\t<b>wwid</b>: The world wide ID identifying the device excepted from blacklist.<br>\n" +"\t\t\t<b>devnode</b>: Regular expression can be used here to identify device names in udev_dir (default in directory /dev). Common device names are cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop.<br>\n" +"\t\t\t<b>device</b>: Used to identify a specific storage controller excepted from blacklist. A device can be specified by vendor and product name.<br>\n" "</p>" msgstr "" "<p><b><big>블랙리스트 예외 구성</big></b><br>\n" "\t\t\t여기에 나열된 장치 이름은 블랙리스트에서 제외됩니다.<br>\n" -"\t\t\t장치 이름을 식별하는 데는 <b>wwid</b>, <b>devnode</b>, <b>장치</b>의 " -"세 가지 방법이 있습니다.<br><br>\n" -"\t\t\t<b>wwid</b>: 블랙리스트에서 제외된 장치를 식별하는 World Wide ID입니다." -"<br>\n" -"\t\t\t<b>devnode</b>: udev_dir(기본값은 directory /dev에 있음)에서 장치 이름" -"을 식별하기 위해 여기에서 정규식을 사용할 수 있습니다. 일반 장치 이름은 " -"cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop입니다.<br>\n" -"\t\t\t<b>장치</b>: 블랙리스트에서 제외된 특정 저장소 컨트롤러를 식별하는 데 " -"사용됩니다. 장치는 제조업체와 제품 이름별로 지정할 수 있습니다.<br>\n" +"\t\t\t장치 이름을 식별하는 데는 <b>wwid</b>, <b>devnode</b>, <b>장치</b>의 세 가지 방법이 있습니다.<br><br>\n" +"\t\t\t<b>wwid</b>: 블랙리스트에서 제외된 장치를 식별하는 World Wide ID입니다.<br>\n" +"\t\t\t<b>devnode</b>: udev_dir(기본값은 directory /dev에 있음)에서 장치 이름을 식별하기 위해 여기에서 정규식을 사용할 수 있습니다. 일반 장치 이름은 cciss, fd, hd, md, dm, sr, scd, st, ram, raw, loop입니다.<br>\n" +"\t\t\t<b>장치</b>: 블랙리스트에서 제외된 특정 저장소 컨트롤러를 식별하는 데 사용됩니다. 장치는 제조업체와 제품 이름별로 지정할 수 있습니다.<br>\n" "</p>" -#. dialog help for devcies section configure tab 1/3 -#: src/include/multipath/helps.rb:99 +#. dialog help for devcies section configure tab 1/3 +#: src/include/multipath/helps.rb:99 msgid "" "<p><b><big>Devices Configuration</big></b><br>\n" -"\t\t\tPer storage controller settings are listed here, they override the " -"default settings and are overridden by per multipath settings.<br>\n" -"\t\t\tEach device is identified by <b>vendor</b> and <b>product</b> name." -"<br></p>\n" +"\t\t\tPer storage controller settings are listed here, they override the default settings and are overridden by per multipath settings.<br>\n" +"\t\t\tEach device is identified by <b>vendor</b> and <b>product</b> name.<br></p>\n" msgstr "" "<p><b><big>장치 구성</big></b><br>\n" -"\t\t\t저장소 컨트롤러별 설정이 여기에 나열되며, 기본 설정을 무효화하고 다중 " -"경로별 설정에 의해 무효화됩니다.<br>\n" +"\t\t\t저장소 컨트롤러별 설정이 여기에 나열되며, 기본 설정을 무효화하고 다중 경로별 설정에 의해 무효화됩니다.<br>\n" "\t\t\t각 장치는 <b>제조업체</b> 및 <b>제품</b> 이름으로 식별됩니다.<br></p>\n" -#. add quotes to configuration value, no matter how many words. -#. if the value has quotes pair, do not touch it. -#. if more than 1 quote at the head or end, only keep one. -#. if there are quote inside the value, ignore. -#: src/include/multipath/options.rb:832 src/include/multipath/options.rb:1662 -#: src/include/multipath/options.rb:1726 -#: src/include/multipath/options.rb:1939 +#. add quotes to configuration value, no matter how many words. +#. if the value has quotes pair, do not touch it. +#. if more than 1 quote at the head or end, only keep one. +#. if there are quote inside the value, ignore. +#: src/include/multipath/options.rb:832 src/include/multipath/options.rb:1662 +#: src/include/multipath/options.rb:1726 src/include/multipath/options.rb:1939 msgid "should be a decimal integer" msgstr "10진수여야 합니다." -#. replacewidget_notify = true; -#: src/include/multipath/options.rb:840 src/include/multipath/options.rb:857 -#: src/include/multipath/options.rb:911 src/include/multipath/options.rb:994 -#: src/include/multipath/options.rb:1079 -#: src/include/multipath/options.rb:1156 -#: src/include/multipath/options.rb:1271 -#: src/include/multipath/options.rb:1375 -#: src/include/multipath/options.rb:1437 -#: src/include/multipath/options.rb:1538 -#: src/include/multipath/options.rb:1668 -#: src/include/multipath/options.rb:1681 -#: src/include/multipath/options.rb:1744 -#: src/include/multipath/options.rb:1805 -#: src/include/multipath/options.rb:1944 -#: src/include/multipath/options.rb:1950 -#: src/include/multipath/options.rb:2017 -#: src/include/multipath/options.rb:2171 -#: src/include/multipath/options.rb:2335 -#: src/include/multipath/options.rb:2396 +#. replacewidget_notify = true; +#: src/include/multipath/options.rb:840 src/include/multipath/options.rb:857 +#: src/include/multipath/options.rb:911 src/include/multipath/options.rb:994 +#: src/include/multipath/options.rb:1079 src/include/multipath/options.rb:1156 +#: src/include/multipath/options.rb:1271 src/include/multipath/options.rb:1375 +#: src/include/multipath/options.rb:1437 src/include/multipath/options.rb:1538 +#: src/include/multipath/options.rb:1668 src/include/multipath/options.rb:1681 +#: src/include/multipath/options.rb:1744 src/include/multipath/options.rb:1805 +#: src/include/multipath/options.rb:1944 src/include/multipath/options.rb:1950 +#: src/include/multipath/options.rb:2017 src/include/multipath/options.rb:2171 +#: src/include/multipath/options.rb:2335 src/include/multipath/options.rb:2396 msgid "illegal value" msgstr "잘못된 값" -#: src/include/multipath/options.rb:847 src/include/multipath/options.rb:1674 +#: src/include/multipath/options.rb:847 src/include/multipath/options.rb:1674 msgid "should be greater than 0" msgstr "0보다 커야 합니다." -#: src/include/multipath/options.rb:1737 +#: src/include/multipath/options.rb:1737 msgid "invalid decimal integer" msgstr "잘못된 10진수" -#: src/include/multipath/options.rb:2063 -#: src/include/multipath/options.rb:2118 -#: src/include/multipath/options.rb:2223 -#: src/include/multipath/options.rb:2278 +#: src/include/multipath/options.rb:2063 src/include/multipath/options.rb:2118 +#: src/include/multipath/options.rb:2223 src/include/multipath/options.rb:2278 msgid "should not be empty" msgstr "비워둘 수 없음" -#. Initialization dialog contents -#: src/include/multipath/wizards.rb:72 +#. Initialization dialog contents +#: src/include/multipath/wizards.rb:72 msgid "Initializing..." msgstr "초기화 중..." -#. prepare for loading built-in configurations -#: src/modules/Multipath.rb:98 +#. prepare for loading built-in configurations +#: src/modules/Multipath.rb:98 msgid "Cannot read multipath section in multipath configuration." msgstr "다중 경로 구성의 multipath 섹션을 읽을 수 없습니다." -#: src/modules/Multipath.rb:106 +#: src/modules/Multipath.rb:106 msgid "Cannot read defaults section in multipath configuration." msgstr "다중 경로 구성의 defaults 섹션을 읽을 수 없습니다." -#: src/modules/Multipath.rb:114 +#: src/modules/Multipath.rb:114 msgid "Cannot read blacklist section in multipath configuration." msgstr "다중 경로 구성의 blacklist 섹션을 읽을 수 없습니다." -#: src/modules/Multipath.rb:122 +#: src/modules/Multipath.rb:122 msgid "Cannot read blacklist_exceptions section in multipath configuration." msgstr "다중 경로 구성의 blacklist_exceptions 섹션을 읽을 수 없습니다." -#: src/modules/Multipath.rb:132 +#: src/modules/Multipath.rb:132 msgid "Cannot read devices section in multipath configuration." msgstr "다중 경로 구성의 devices 섹션을 읽을 수 없습니다." -#. Multipath read dialog caption -#: src/modules/Multipath.rb:145 +#. Multipath read dialog caption +#: src/modules/Multipath.rb:145 msgid "Initializing Multipath Configuration" msgstr "다중 경로 구성 초기화" -#. Progress stage 1/3 -#: src/modules/Multipath.rb:159 +#. Progress stage 1/3 +#: src/modules/Multipath.rb:159 msgid "Read configurations" msgstr "구성 읽기" -#. Progress stage 2/3 -#: src/modules/Multipath.rb:161 +#. Progress stage 2/3 +#: src/modules/Multipath.rb:161 msgid "Read service status" msgstr "서비스 상태 읽기" -#. Progress stage 3/3 -#: src/modules/Multipath.rb:163 +#. Progress stage 3/3 +#: src/modules/Multipath.rb:163 msgid "Detect the devices" msgstr "장치 감지" -#. Progress step 1/3 -#: src/modules/Multipath.rb:167 +#. Progress step 1/3 +#: src/modules/Multipath.rb:167 msgid "Reading the configurations..." msgstr "구성을 읽는 중..." -#. Progress step 2/3 -#: src/modules/Multipath.rb:169 +#. Progress step 2/3 +#: src/modules/Multipath.rb:169 msgid "Reading the service status..." msgstr "서비스 상태를 읽는 중..." -#. Progress step 3/3 -#: src/modules/Multipath.rb:171 +#. Progress step 3/3 +#: src/modules/Multipath.rb:171 msgid "Detecting the devices..." msgstr "장치 감지 중..." -#. Progress finished -#. Progress finished -#: src/modules/Multipath.rb:173 src/modules/Multipath.rb:274 +#. Progress finished +#. Progress finished +#: src/modules/Multipath.rb:173 src/modules/Multipath.rb:274 msgid "Finished" msgstr "완료됨" -#. BNC #418703 -#. Checking and Installing packages only if needed (possible) -#: src/modules/Multipath.rb:186 +#. BNC #418703 +#. Checking and Installing packages only if needed (possible) +#: src/modules/Multipath.rb:186 msgid "Cannot install required packages." msgstr "필요한 패키지를 설치할 수 없습니다." -#. Error message -#: src/modules/Multipath.rb:233 +#. Error message +#: src/modules/Multipath.rb:233 msgid "Cannot detect devices." msgstr "장치를 감지할 수 없습니다." -#. Multipath read dialog caption -#: src/modules/Multipath.rb:248 +#. Multipath read dialog caption +#: src/modules/Multipath.rb:248 msgid "Saving Multipath Configuration" msgstr "다중 경로 구성 저장" -#. Progress stage 1/3 -#: src/modules/Multipath.rb:264 +#. Progress stage 1/3 +#: src/modules/Multipath.rb:264 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress stage 2/3 -#: src/modules/Multipath.rb:266 +#. Progress stage 2/3 +#: src/modules/Multipath.rb:266 msgid "Restart multipathd" msgstr "multipathd 재시작" -#. Progress step 1/2 -#: src/modules/Multipath.rb:270 +#. Progress step 1/2 +#: src/modules/Multipath.rb:270 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Progress step 2/2 -#: src/modules/Multipath.rb:272 +#. Progress step 2/2 +#: src/modules/Multipath.rb:272 msgid "Restarting multipathd..." msgstr "multipathd 재시작 중..." -#. write settings -#: src/modules/Multipath.rb:284 +#. write settings +#: src/modules/Multipath.rb:284 msgid "Can not write settings." msgstr "설정을 기록할 수 없습니다." -#. restart multipathd -#: src/modules/Multipath.rb:299 +#. restart multipathd +#: src/modules/Multipath.rb:299 msgid "Restarting multipathd failed." msgstr "multipathd 다시 시작에 실패했습니다." -#: src/modules/Multipath.rb:423 src/modules/Multipath.rb:432 +#: src/modules/Multipath.rb:423 src/modules/Multipath.rb:432 msgid "Ignore your modification?" msgstr "수정을 무시하시겠습니까?" Modified: branches/SLE12-SP3/yast/ko/po/ncurses-pkg.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ncurses-pkg.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ncurses-pkg.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -15,1438 +15,1111 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#. headline of package versions popup -#: src/NCPackageSelector.cc:990 +#. headline of package versions popup +#: src/NCPackageSelector.cc:990 msgid "Package Versions" msgstr "패키지 버전" -#. text above of list of all package versions -#: src/NCPackageSelector.cc:992 +#. text above of list of all package versions +#: src/NCPackageSelector.cc:992 msgid "List of all available package versions:" msgstr "사용 가능한 모든 패키지 버전 목록:" -#: src/NCPackageSelector.cc:1105 +#: src/NCPackageSelector.cc:1105 msgid "&Packages with Status" msgstr "상태가 포함된 패키지(&P)" -#. headline - packages with automatic status change -#. headline of a popup with packages -#. the headline of the popup containing a list with packages with status changes -#: src/NCPackageSelector.cc:1280 src/NCPkgMenuDeps.cc:192 -#: src/NCPkgMenuDeps.cc:289 src/NCPkgStrings.cc:589 +#. headline - packages with automatic status change +#. headline of a popup with packages +#. the headline of the popup containing a list with packages with status changes +#: src/NCPackageSelector.cc:1280 src/NCPkgMenuDeps.cc:192 +#: src/NCPkgMenuDeps.cc:289 src/NCPkgStrings.cc:589 msgid "Automatic Changes" msgstr "자동 변경" -#. text part1 of popup with automatic changes (it's a label; text continous) -#: src/NCPackageSelector.cc:1282 src/NCPkgStrings.cc:596 +#. text part1 of popup with automatic changes (it's a label; text continous) +#: src/NCPackageSelector.cc:1282 src/NCPkgStrings.cc:596 msgid "In addition to your manual selections, the following" msgstr "수동 선택 외에도 종속성을 해결하기 위해 다음" -#. text part2 of popup with automatic changes -#. text part1 of popup with automatic changes continous -#: src/NCPackageSelector.cc:1284 src/NCPkgStrings.cc:603 +#. text part2 of popup with automatic changes +#. text part1 of popup with automatic changes continous +#: src/NCPackageSelector.cc:1284 src/NCPkgStrings.cc:603 msgid "packages have been changed to resolve dependencies:" msgstr "패키지가 변경되었습니다." -#: src/NCPackageSelector.cc:1307 -msgid "" -"You can choose to install anyway, but you risk getting a corrupted system." +#: src/NCPackageSelector.cc:1307 +msgid "You can choose to install anyway, but you risk getting a corrupted system." msgstr "설치하도록 선택할 수는 있지만 시스템이 손상될 수 있습니다." -#: src/NCPackageSelector.cc:1308 +#: src/NCPackageSelector.cc:1308 msgid "&Continue anyway" msgstr "계속(&C)" -#. headline of a popup showing the package license -#: src/NCPackageSelector.cc:1502 +#. headline of a popup showing the package license +#: src/NCPackageSelector.cc:1502 msgid "End User License Agreement" msgstr "최종 사용자 사용권 계약" -#. label text - keep it short -#: src/NCPackageSelector.cc:1691 +#. label text - keep it short +#: src/NCPackageSelector.cc:1691 msgid "Filter: " msgstr "필터:" -#. label text - keep it short (use abbreviation if necessary) -#: src/NCPackageSelector.cc:1698 +#. label text - keep it short (use abbreviation if necessary) +#: src/NCPackageSelector.cc:1698 msgid "Total Download Size: " msgstr "전체 다운로드 크기: " -#. Help button -#: src/NCPackageSelector.cc:1711 src/NCPackageSelector.cc:1828 -#: src/NCPkgStrings.cc:107 +#. Help button +#: src/NCPackageSelector.cc:1711 src/NCPackageSelector.cc:1828 +#: src/NCPkgStrings.cc:107 msgid "&Help" msgstr "도움말(&H)" -#. add the Cancel button -#. begin: the label of the Cancel button -#: src/NCPackageSelector.cc:1717 src/NCPackageSelector.cc:1836 -#: src/NCPkgStrings.cc:691 +#. add the Cancel button +#. begin: the label of the Cancel button +#: src/NCPackageSelector.cc:1717 src/NCPackageSelector.cc:1836 +#: src/NCPkgStrings.cc:691 msgid "&Cancel" msgstr "취소(&C)" -#. add the OK button -#. the label of an Accept button -#: src/NCPackageSelector.cc:1722 src/NCPackageSelector.cc:1841 -#: src/NCPkgStrings.cc:705 +#. add the OK button +#. the label of an Accept button +#: src/NCPackageSelector.cc:1722 src/NCPackageSelector.cc:1841 +#: src/NCPkgStrings.cc:705 msgid "&Accept" msgstr "적용(&A)" -#: src/NCPackageSelector.cc:1747 +#: src/NCPackageSelector.cc:1747 msgid "C&onfiguration" msgstr "구성(&O)" -#. fill seclection box -#: src/NCPkgFilterClassification.cc:74 +#. fill seclection box +#: src/NCPkgFilterClassification.cc:74 msgid "Recommended" msgstr "추천" -#: src/NCPkgFilterClassification.cc:77 +#: src/NCPkgFilterClassification.cc:77 msgid "Suggested" msgstr "제안됨" -#: src/NCPkgFilterClassification.cc:80 +#: src/NCPkgFilterClassification.cc:80 msgid "Orphaned" msgstr "독립" -#: src/NCPkgFilterClassification.cc:83 +#: src/NCPkgFilterClassification.cc:83 msgid "Unneeded" msgstr "불필요" -#: src/NCPkgFilterClassification.cc:203 -msgid "" -"This is a list of useful packages. They will be additionally installed if " -"recommeded by a newly installed package." -msgstr "" -"유용한 패키지 목록입니다. 새로 설치된 패키지에서 권장할 경우 추가로 설치됩니" -"다." +#: src/NCPkgFilterClassification.cc:203 +msgid "This is a list of useful packages. They will be additionally installed if recommeded by a newly installed package." +msgstr "유용한 패키지 목록입니다. 새로 설치된 패키지에서 권장할 경우 추가로 설치됩니다." -#: src/NCPkgFilterClassification.cc:207 -msgid "" -"It's suggested to install these packages because they fit to already " -"installed packages. The decision to install it is by the user." -msgstr "" -"이러한 패키지는 이미 설치된 패키지에 맞으므로 설치하는 것이 좋습니다. 사용자" -"가 설치 결정을 내립니다." +#: src/NCPkgFilterClassification.cc:207 +msgid "It's suggested to install these packages because they fit to already installed packages. The decision to install it is by the user." +msgstr "이러한 패키지는 이미 설치된 패키지에 맞으므로 설치하는 것이 좋습니다. 사용자가 설치 결정을 내립니다." -#: src/NCPkgFilterClassification.cc:211 -msgid "" -"The solver has detected that these packages are without a repository, i.e. " -"updates aren't possible." -msgstr "" -"해결 프로그램에서 이러한 패키지에 리포지토리가 없는 것을 발견했습니다(즉, 업" -"데이트가 불가능함)." +#: src/NCPkgFilterClassification.cc:211 +msgid "The solver has detected that these packages are without a repository, i.e. updates aren't possible." +msgstr "해결 프로그램에서 이러한 패키지에 리포지토리가 없는 것을 발견했습니다(즉, 업데이트가 불가능함)." -#: src/NCPkgFilterClassification.cc:215 -msgid "" -"These packages might be unneeded because former dependencies don't apply any " -"longer." -msgstr "" -"이전 종속성이 더 이상 적용되지 않으므로 이러한 패키지는 필요하지 않을 수 있습" -"니다." +#: src/NCPkgFilterClassification.cc:215 +msgid "These packages might be unneeded because former dependencies don't apply any longer." +msgstr "이전 종속성이 더 이상 적용되지 않으므로 이러한 패키지는 필요하지 않을 수 있습니다." -#: src/NCPkgFilterInstSummary.cc:65 +#: src/NCPkgFilterInstSummary.cc:65 msgid "Delete" msgstr "삭제" -#: src/NCPkgFilterInstSummary.cc:67 +#: src/NCPkgFilterInstSummary.cc:67 msgid "Install" msgstr "설치" -#: src/NCPkgFilterInstSummary.cc:69 +#: src/NCPkgFilterInstSummary.cc:69 msgid "Update" msgstr "업데이트" -#: src/NCPkgFilterInstSummary.cc:71 +#: src/NCPkgFilterInstSummary.cc:71 msgid "Taboo" msgstr "금지" -#: src/NCPkgFilterInstSummary.cc:73 +#: src/NCPkgFilterInstSummary.cc:73 msgid "Protected" msgstr "보호됨" -#: src/NCPkgFilterInstSummary.cc:75 +#: src/NCPkgFilterInstSummary.cc:75 msgid "Keep" msgstr "저장" -#: src/NCPkgFilterInstSummary.cc:77 +#: src/NCPkgFilterInstSummary.cc:77 msgid "Do not install" msgstr "설치 안 함" -#. Translators: %s is a locale code, e.g. en_GB -#: src/NCPkgFilterLocale.cc:178 +#. Translators: %s is a locale code, e.g. en_GB +#: src/NCPkgFilterLocale.cc:178 #, c-format -msgid "" -"Translations, dictionaries and other language-related files for <b>%s</b> " -"locale" +msgid "Translations, dictionaries and other language-related files for <b>%s</b> locale" msgstr "<b>%s</b> 로케일에 대한 번역, 사전 및 기타 언어 관련 파일" -#. the label of the selections -#: src/NCPkgFilterMain.cc:68 src/NCPkgStrings.cc:326 +#. the label of the selections +#: src/NCPkgFilterMain.cc:68 src/NCPkgStrings.cc:326 msgid "Patterns" msgstr "패턴" -#: src/NCPkgFilterMain.cc:71 +#: src/NCPkgFilterMain.cc:71 msgid "Languages" msgstr "언어" -#: src/NCPkgFilterMain.cc:74 +#: src/NCPkgFilterMain.cc:74 msgid "RPM Groups" msgstr "RPM 그룹" -#: src/NCPkgFilterMain.cc:77 +#: src/NCPkgFilterMain.cc:77 msgid "Repositories" msgstr "리포지토리" -#: src/NCPkgFilterMain.cc:80 +#: src/NCPkgFilterMain.cc:80 msgid "Search" msgstr "검색" -#: src/NCPkgFilterMain.cc:84 +#: src/NCPkgFilterMain.cc:84 msgid "Installation Summary" msgstr "설치 요약" -#: src/NCPkgFilterMain.cc:87 +#: src/NCPkgFilterMain.cc:87 msgid "Package Classification" msgstr "패키지 분류" -#: src/NCPkgFilterPattern.cc:183 +#: src/NCPkgFilterPattern.cc:183 #, c-format msgid "%d of %d package installed" msgid_plural "%d of %d packages installed" msgstr[0] "%d/%d개 패키지를 설치했습니다." -#: src/NCPkgFilterRepo.cc:196 +#: src/NCPkgFilterRepo.cc:196 msgid "<b>@System</b>: local RPM database" msgstr "<b>@System</b>: 로컬 RPM 데이터베이스" -#: src/NCPkgFilterRepo.cc:199 +#: src/NCPkgFilterRepo.cc:199 msgid "<b>Repository URL:</b>" msgstr "<b>리포지토리 URL:</b>" -#: src/NCPkgFilterSearch.cc:126 +#: src/NCPkgFilterSearch.cc:126 msgid "&Ignore Case" msgstr "대소문자 무시(&I)" -#: src/NCPkgFilterSearch.cc:132 +#: src/NCPkgFilterSearch.cc:132 msgid "Search &Mode" msgstr "검색 모드(&M)" -#: src/NCPkgFilterSearch.cc:134 +#: src/NCPkgFilterSearch.cc:134 msgid "Contains" msgstr "포함" -#: src/NCPkgFilterSearch.cc:135 +#: src/NCPkgFilterSearch.cc:135 msgid "Begins with" msgstr "시작 문자" -#: src/NCPkgFilterSearch.cc:136 +#: src/NCPkgFilterSearch.cc:136 msgid "Exact Match" msgstr "정확히 일치" -#: src/NCPkgFilterSearch.cc:137 +#: src/NCPkgFilterSearch.cc:137 msgid "Use Wildcards" msgstr "와일드카드 사용" -#: src/NCPkgFilterSearch.cc:138 +#: src/NCPkgFilterSearch.cc:138 msgid "Use RegExp" msgstr "RegExp 사용" -#: src/NCPkgFilterSearch.cc:241 +#: src/NCPkgFilterSearch.cc:241 msgid "Searching..." msgstr "검색 중..." -#. Popup informs the user that the query std::string -#. entered for package search isn't correct -#: src/NCPkgFilterSearch.cc:262 +#. Popup informs the user that the query std::string +#. entered for package search isn't correct +#: src/NCPkgFilterSearch.cc:262 msgid "Query Error:" msgstr "쿼리 오류:" -#: src/NCPkgFilterSearch.cc:275 +#: src/NCPkgFilterSearch.cc:275 #, c-format msgid "%d packages found" msgstr "%d개 패키지를 찾았습니다." -#. Please note: add an appropriate number of whitespaces to get a well -#. formated menu (the [ ]s should be in one column) and use unique hotkeys until end: -#. begin: Actions menu, toggle the status of a package, e.g. change from installed to delete -#: src/NCPkgMenuAction.cc:72 +#. Please note: add an appropriate number of whitespaces to get a well +#. formated menu (the [ ]s should be in one column) and use unique hotkeys until end: +#. begin: Actions menu, toggle the status of a package, e.g. change from installed to delete +#: src/NCPkgMenuAction.cc:72 msgid "&Toggle [SPACE]" msgstr "전환(&T) [SPACE]" -#: src/NCPkgMenuAction.cc:73 +#: src/NCPkgMenuAction.cc:73 msgid "&Install [+]" msgstr "설치(&I) [+]" -#: src/NCPkgMenuAction.cc:74 +#: src/NCPkgMenuAction.cc:74 msgid "&Delete [-]" msgstr "삭제(&D) [-]" -#: src/NCPkgMenuAction.cc:75 +#: src/NCPkgMenuAction.cc:75 msgid "&Update [>]" msgstr "업데이트(&U) [>]" -#: src/NCPkgMenuAction.cc:76 +#: src/NCPkgMenuAction.cc:76 msgid "Ta&boo [!]" msgstr "타부(&B) [!]" -#: src/NCPkgMenuAction.cc:77 +#: src/NCPkgMenuAction.cc:77 msgid "&Lock [*]" msgstr "잠금(&L) [*]" -#. end: Actions menu, set status of all packages (title of a submenu) -#: src/NCPkgMenuAction.cc:79 +#. end: Actions menu, set status of all packages (title of a submenu) +#: src/NCPkgMenuAction.cc:79 msgid "&All Listed Packages" msgstr "나열된 모든 패키지(&A)" -#. begin: submenu items actions concerning all packages -#: src/NCPkgMenuAction.cc:90 +#. begin: submenu items actions concerning all packages +#: src/NCPkgMenuAction.cc:90 msgid "&Install All" msgstr "모두 설치(&I)" -#: src/NCPkgMenuAction.cc:91 +#: src/NCPkgMenuAction.cc:91 msgid "&Delete All" msgstr "모두 삭제(&D)" -#: src/NCPkgMenuAction.cc:92 +#: src/NCPkgMenuAction.cc:92 msgid "&Keep All" msgstr "모두 저장(&K)" -#: src/NCPkgMenuAction.cc:93 +#: src/NCPkgMenuAction.cc:93 msgid "U&pdate All Unconditionally" msgstr "무조건 모두 업데이트(&P)" -#. end: submenu items: actions concerning all packages -#: src/NCPkgMenuAction.cc:95 +#. end: submenu items: actions concerning all packages +#: src/NCPkgMenuAction.cc:95 msgid "&Update If Newer Version Available" msgstr "최신 버전이 있는 경우 업데이트(&U)" -#. YOU mode -#. Please note: add an appropriate number of whitespaces to get a well -#. formated menu (the [ ]s should be in one column) and use unique hotkeys until end: -#. begin: Online Update Actions menu -#: src/NCPkgMenuAction.cc:103 +#. YOU mode +#. Please note: add an appropriate number of whitespaces to get a well +#. formated menu (the [ ]s should be in one column) and use unique hotkeys until end: +#. begin: Online Update Actions menu +#: src/NCPkgMenuAction.cc:103 msgid "&Toggle [SPACE]" msgstr "전환(&T) [SPACE]" -#: src/NCPkgMenuAction.cc:104 +#: src/NCPkgMenuAction.cc:104 msgid "&Install [+]" msgstr "설치(&I) [+]" -#: src/NCPkgMenuAction.cc:105 +#: src/NCPkgMenuAction.cc:105 msgid "&Do Not Install [-]" msgstr "설치 안 함(&D) [-]" -#: src/NCPkgMenuAction.cc:106 +#: src/NCPkgMenuAction.cc:106 msgid "&Lock or Taboo [!]" msgstr "잠금 또는 타부[!](&L)" -#: src/NCPkgMenuConfig.cc:81 +#: src/NCPkgMenuConfig.cc:81 msgid "Launch &Repository Manager" msgstr "리포지토리 관리자 실행(&R)" -#: src/NCPkgMenuConfig.cc:82 +#: src/NCPkgMenuConfig.cc:82 msgid "Launch &Online Update Configuration" msgstr "온라인 업데이트 구성 실행(&O)" -#: src/NCPkgMenuConfig.cc:83 +#: src/NCPkgMenuConfig.cc:83 msgid "&Action after Package Installation" msgstr "패키지 설치 후 작업(&A)" -#: src/NCPkgMenuConfig.cc:92 +#: src/NCPkgMenuConfig.cc:92 msgid "&Restart Package Manager" msgstr "패키지 관리자 재시작(&R)" -#: src/NCPkgMenuConfig.cc:93 +#: src/NCPkgMenuConfig.cc:93 msgid "&Close Package Manager" msgstr "패키지 관리자 닫기(&C)" -#: src/NCPkgMenuConfig.cc:94 +#: src/NCPkgMenuConfig.cc:94 msgid "&Show Summary" msgstr "요약 표시(&S)" -#: src/NCPkgMenuDeps.cc:84 +#: src/NCPkgMenuDeps.cc:84 msgid "&Automatic Dependency Check" msgstr "자동 종속성 확인(&A)" -#: src/NCPkgMenuDeps.cc:88 +#: src/NCPkgMenuDeps.cc:88 msgid "&Check Dependencies Now" msgstr "지금 종속성 검사(&C)" -#: src/NCPkgMenuDeps.cc:91 +#: src/NCPkgMenuDeps.cc:91 msgid "&System Verification Mode" msgstr "시스템 확인 모드(&S)" -#: src/NCPkgMenuDeps.cc:95 +#: src/NCPkgMenuDeps.cc:95 msgid "&Verify System Now" msgstr "지금 시스템 확인(&V)" -#: src/NCPkgMenuDeps.cc:98 +#: src/NCPkgMenuDeps.cc:98 msgid "Install &Recommended Packages" msgstr "권장 패키지 설치(&R)" -#: src/NCPkgMenuDeps.cc:102 +#: src/NCPkgMenuDeps.cc:102 msgid "&Install Recommended Packages for Already Installed Packages Now" msgstr "이미 설치된 패키지에 대한 권장 패키지 지금 설치(&I)" -#: src/NCPkgMenuDeps.cc:105 +#: src/NCPkgMenuDeps.cc:105 msgid "Cleanup when &Deleting Packages (Temporary Change)" msgstr "패키지 삭제 시 정리(임시 변경)(&D)" -#: src/NCPkgMenuDeps.cc:109 +#: src/NCPkgMenuDeps.cc:109 msgid "Allow &Vendor Change (Temporary Change)" msgstr "제조업체 변경 허용(임시 변경)(&V)" -#: src/NCPkgMenuDeps.cc:113 +#: src/NCPkgMenuDeps.cc:113 msgid "&Generate Dependency Solver Testcase" msgstr "종속성 해결 프로그램 테스트 사례 생성(&G)" -#: src/NCPkgMenuDeps.cc:169 +#: src/NCPkgMenuDeps.cc:169 msgid "All package dependencies are OK." msgstr "모든 패키지의 종속성에 문제가 없습니다." -#. part 1 of a text explaining the list of packages which follow -#: src/NCPkgMenuDeps.cc:194 +#. part 1 of a text explaining the list of packages which follow +#: src/NCPkgMenuDeps.cc:194 msgid "Being recommended by already installed packages, the following" msgstr "이미 설치된 패키지에서 권장하는 추가 패키지" -#. part 2 of the text -#: src/NCPkgMenuDeps.cc:196 src/NCPkgMenuDeps.cc:293 +#. part 2 of the text +#: src/NCPkgMenuDeps.cc:196 src/NCPkgMenuDeps.cc:293 msgid "packages have been automatically selected for installation:" msgstr "패키지가 설치되도록 자동으로 선택되었습니다." -#: src/NCPkgMenuDeps.cc:226 +#: src/NCPkgMenuDeps.cc:226 msgid "Dependency resolver test case written to " msgstr "종속성 확인자 테스트 사례가 기록됨 " -#. part 1 of a text explaining the list of packages which follow -#: src/NCPkgMenuDeps.cc:291 +#. part 1 of a text explaining the list of packages which follow +#: src/NCPkgMenuDeps.cc:291 msgid "To fulfill the dependencies of already installed packages following" msgstr "이미 설치된 패키지의 종속성을 이행하기 위해 다음" -#. dependencies OK, no automatic changes/the user has accepted the changes -#: src/NCPkgMenuDeps.cc:305 +#. dependencies OK, no automatic changes/the user has accepted the changes +#: src/NCPkgMenuDeps.cc:305 msgid "System dependencies verify OK." msgstr "시스템 종속성 확인에 문제가 없습니다." -#: src/NCPkgMenuExtras.cc:78 +#: src/NCPkgMenuExtras.cc:78 msgid "&Export Package List to File" msgstr "패키지 목록을 파일로 엑스포트(&E)" -#: src/NCPkgMenuExtras.cc:81 +#: src/NCPkgMenuExtras.cc:81 msgid "&Import Package List from File" msgstr "패키지 목록을 파일에서 임포트(&I)" -#: src/NCPkgMenuExtras.cc:84 +#: src/NCPkgMenuExtras.cc:84 msgid "&Show Available Disk Space" msgstr "사용 가능한 디스크 공간 표시(&S)" -#: src/NCPkgMenuExtras.cc:191 +#: src/NCPkgMenuExtras.cc:191 msgid "Export List of All Packages and Patterns to File" msgstr "모든 패키지와 패턴 목록을 파일로 엑스포트" -#: src/NCPkgMenuExtras.cc:224 +#: src/NCPkgMenuExtras.cc:224 msgid "Error exporting list of packages and patterns to " msgstr "패키지와 패턴 목록을 엑스포트하는 중에 오류가 발생했습니다." -#: src/NCPkgMenuExtras.cc:246 +#: src/NCPkgMenuExtras.cc:246 msgid "Import List of All Packages and Patterns from File" msgstr "모든 패키지와 패턴 목록을 파일에서 임포트" -#: src/NCPkgMenuExtras.cc:310 +#: src/NCPkgMenuExtras.cc:310 msgid "Error importing list of packages and patterns from " msgstr "패키지와 패턴 목록을 임포트하는 중에 오류가 발생했습니다." -#. menu items of the filter menu for patches - keep them short -#. and use unique hotkeys from begin: to end: -#. begin: -#: src/NCPkgMenuFilter.cc:72 +#. menu items of the filter menu for patches - keep them short +#. and use unique hotkeys from begin: to end: +#. begin: +#: src/NCPkgMenuFilter.cc:72 msgid "&Needed Patches" msgstr "필요한 패치(&N)" -#. _( "Re&levant Patches" ) -#: src/NCPkgMenuFilter.cc:74 +#. _( "Re&levant Patches" ) +#: src/NCPkgMenuFilter.cc:74 msgid "&Installed Patches" msgstr "설치된 패치(&I)" -#. _( "&Satisfied Patches" ) ); -#: src/NCPkgMenuFilter.cc:76 +#. _( "&Satisfied Patches" ) ); +#: src/NCPkgMenuFilter.cc:76 msgid "&Recommended" msgstr "추천(&R) " -#: src/NCPkgMenuFilter.cc:77 +#: src/NCPkgMenuFilter.cc:77 msgid "&Security" msgstr "보안(&S)" -#: src/NCPkgMenuFilter.cc:78 +#: src/NCPkgMenuFilter.cc:78 msgid "&Optional" msgstr "선택 사항(&O)" -#: src/NCPkgMenuFilter.cc:79 +#: src/NCPkgMenuFilter.cc:79 msgid "&All Patches" msgstr "모든 패치(&A)" -#. end: -#: src/NCPkgMenuFilter.cc:81 +#. end: +#: src/NCPkgMenuFilter.cc:81 msgid "S&earch" msgstr "검색(&E)" -#: src/NCPkgMenuHelp.cc:71 +#: src/NCPkgMenuHelp.cc:71 msgid "&General Help" msgstr "일반적인 도움말(&G)" -#: src/NCPkgMenuHelp.cc:74 +#: src/NCPkgMenuHelp.cc:74 msgid "&Package Status and Symbols" msgstr "패키지 상태 및 기호(&P)" -#: src/NCPkgMenuHelp.cc:77 +#: src/NCPkgMenuHelp.cc:77 msgid "&How to Use the Filters" msgstr "필터 사용 방법(&H)" -#: src/NCPkgMenuHelp.cc:80 +#: src/NCPkgMenuHelp.cc:80 msgid "&Useful Functions in Menu" msgstr "매뉴의 편리한 기능(&U)" -#: src/NCPkgMenuHelp.cc:84 +#: src/NCPkgMenuHelp.cc:84 msgid "&Patch Status and Patch Installation" msgstr "패치 상태 및 패치 설치(&P)" -#. begin: menu items of the view (package information) menu -#. please note: use unique hotkeys until end: -#: src/NCPkgMenuView.cc:71 +#. begin: menu items of the view (package information) menu +#. please note: use unique hotkeys until end: +#: src/NCPkgMenuView.cc:71 msgid "&Technical Data" msgstr "기술 데이터(&T)" -#: src/NCPkgMenuView.cc:72 +#: src/NCPkgMenuView.cc:72 msgid "&Package Description" msgstr "패키지 설명(&P)" -#: src/NCPkgMenuView.cc:73 +#: src/NCPkgMenuView.cc:73 msgid "Package &Versions" msgstr "패키지 버전(&V)" -#: src/NCPkgMenuView.cc:74 +#: src/NCPkgMenuView.cc:74 msgid "&File List" msgstr "파일 목록(&F)" -#. end: menu items of the view menu -#. menu entry 1 - all about pkg dependencies -#: src/NCPkgMenuView.cc:76 src/NCPkgStrings.cc:57 +#. end: menu items of the view menu +#. menu entry 1 - all about pkg dependencies +#: src/NCPkgMenuView.cc:76 src/NCPkgStrings.cc:57 msgid "&Dependencies" msgstr "종속성(&D)" -#. menu items of the patch view menu - keep them short and -#. use unique hotkeys from begin: to end: -#. begin: -#: src/NCPkgMenuView.cc:91 +#. menu items of the patch view menu - keep them short and +#. use unique hotkeys from begin: to end: +#. begin: +#: src/NCPkgMenuView.cc:91 msgid "&Long Description" msgstr "상세한 설명(&L)" -#: src/NCPkgMenuView.cc:92 +#: src/NCPkgMenuView.cc:92 msgid "&Package List" msgstr "패키지 목록(&P)" -#. end: menu items of the view menu -#: src/NCPkgMenuView.cc:94 +#. end: menu items of the view menu +#: src/NCPkgMenuView.cc:94 msgid "&Versions" msgstr "버전(&V)" -#. name of the source package -#: src/NCPkgPackageDetails.cc:216 +#. name of the source package +#: src/NCPkgPackageDetails.cc:216 msgid "Source Package: " msgstr "소스 패키지:" -#: src/NCPkgPackageDetails.cc:257 +#: src/NCPkgPackageDetails.cc:257 msgid "<i>This information is available for installed packages only.</i>" msgstr "<i>설치된 패키지에 대해서만 이 정보를 사용할 수 있습니다.</i>" -#: src/NCPkgPackageDetails.cc:429 +#: src/NCPkgPackageDetails.cc:429 msgid "References:<br>" msgstr "참조:<br>" -#: src/NCPkgPatchSearch.cc:75 +#: src/NCPkgPatchSearch.cc:75 msgid "Search for Patches" msgstr "패치 검색" -#: src/NCPkgPatchSearch.cc:124 +#: src/NCPkgPatchSearch.cc:124 msgid "Name of the Patch" msgstr "패치 이름" -#. column header package description (keep it short!) -#: src/NCPkgPatchSearch.cc:126 src/NCPkgSearchSettings.cc:64 -#: src/NCPkgStrings.cc:387 +#. column header package description (keep it short!) +#: src/NCPkgPatchSearch.cc:126 src/NCPkgSearchSettings.cc:64 +#: src/NCPkgStrings.cc:387 msgid "Summary" msgstr "요약" -#. the list containing the problems (the unresolved package dependencies) -#: src/NCPkgPopupDeps.cc:173 +#. the list containing the problems (the unresolved package dependencies) +#: src/NCPkgPopupDeps.cc:173 msgid "&Problems" msgstr "문제(&P)" -#. the list containing the solutions of a dependency problem -#: src/NCPkgPopupDeps.cc:190 +#. the list containing the solutions of a dependency problem +#: src/NCPkgPopupDeps.cc:190 msgid "Possible &Solutions" msgstr "가능한 해결책(&S)" -#. hint for the user: more information below -#: src/NCPkgPopupDeps.cc:357 +#. hint for the user: more information below +#: src/NCPkgPopupDeps.cc:357 msgid " see below" msgstr " 아래 참조" -#. hint for the user: there isn't any additional information -#. (for the currently selected solution of a dependency problem) -#: src/NCPkgPopupDeps.cc:542 +#. hint for the user: there isn't any additional information +#. (for the currently selected solution of a dependency problem) +#: src/NCPkgPopupDeps.cc:542 msgid "No further solution details available" msgstr "사용 가능한 추가 솔루션 세부사항이 없습니다." -#. a help line for the dependency popup -#: src/NCPkgPopupDescr.cc:128 +#. a help line for the dependency popup +#: src/NCPkgPopupDescr.cc:128 msgid " [+] Select [-] Delete [>] Update " msgstr " [+] 선택 [-] 삭제 [>] 업데이트" -#: src/NCPkgPopupDiskspace.cc:348 +#: src/NCPkgPopupDiskspace.cc:348 msgid "Error: Out of disk space!" msgstr "오류: 디스크 공간이 부족합니다!" -#: src/NCPkgPopupDiskspace.cc:356 +#: src/NCPkgPopupDiskspace.cc:356 msgid "Warning: Disk space is running out!" msgstr "경고: 디스크 공간이 부족합니다!" -#: src/NCPkgSearchSettings.cc:62 +#: src/NCPkgSearchSettings.cc:62 msgid "Name of the Package" msgstr "패키지 이름" -#: src/NCPkgSearchSettings.cc:66 +#: src/NCPkgSearchSettings.cc:66 msgid "Keywords" msgstr "키워드" -#: src/NCPkgSearchSettings.cc:68 +#: src/NCPkgSearchSettings.cc:68 msgid "Description (time-consuming)" msgstr "설명(시간이 걸림)" -#: src/NCPkgSearchSettings.cc:70 +#: src/NCPkgSearchSettings.cc:70 msgid "Provides" msgstr "공급자" -#: src/NCPkgSearchSettings.cc:72 +#: src/NCPkgSearchSettings.cc:72 msgid "Required by" msgstr "요구자" -#. menu entry 2 - display different kinds of info on pkgs -#: src/NCPkgStrings.cc:64 +#. menu entry 2 - display different kinds of info on pkgs +#: src/NCPkgStrings.cc:64 msgid "&View" msgstr "보기(&V)" -#. menu entry 3 - miscellaneous stuff -#: src/NCPkgStrings.cc:71 +#. menu entry 3 - miscellaneous stuff +#: src/NCPkgStrings.cc:71 msgid "&Extras" msgstr "기타(&E)" -#. pick a package filter - patterns, langs, repos, search,... -#: src/NCPkgStrings.cc:78 +#. pick a package filter - patterns, langs, repos, search,... +#: src/NCPkgStrings.cc:78 msgid "&Filter" msgstr "필터(&F)" -#. All installed Packages -#: src/NCPkgStrings.cc:86 +#. All installed Packages +#: src/NCPkgStrings.cc:86 msgid "Installed Packages" msgstr "설치된 패키지" -#. Label under the pkg table - pkg name follows -#: src/NCPkgStrings.cc:93 +#. Label under the pkg table - pkg name follows +#: src/NCPkgStrings.cc:93 msgid "Package: " msgstr "패키지:" -#. Actions on pkgs (install, remove,..) -#: src/NCPkgStrings.cc:100 +#. Actions on pkgs (install, remove,..) +#: src/NCPkgStrings.cc:100 msgid "A&ctions" msgstr "동작(&C)" -#. the headline of the help window -#: src/NCPkgStrings.cc:114 +#. the headline of the help window +#: src/NCPkgStrings.cc:114 msgid "General Help" msgstr "일반적인 도움말" -#. part1 of help text package installation -#: src/NCPkgStrings.cc:121 -msgid "" -"<p><b>Welcome to the package selector</b></p><p>This tool will help you to " -"manage the software on your system. You can install, update or remove single " -"packages, as well as patterns (sets of packages serving certain purpose) or " -"languages. Usually, you do not need to care about package dependencies when " -"installing or removing anything, the solver will do it for you. The package " -"selector consists of three main parts: <b>filters</b>, <b>package table</b> " -"and <b>menu</b>.</p>" -msgstr "" -"<p><b>패키지 선택기 시작</b></p><p>이 도구는 시스템의 소프트웨어를 관리하는 " -"데 도움이 됩니다. 단일 패키지, 패턴(특정 목적에 사용되는 패키지 집합) 또는 언" -"어를 설치, 업데이트 또는 제거할 수 있습니다. 일반적으로 항목을 설치하거나 제" -"거할 때 패키지 종속성에 대해 염려할 필요가 없습니다. 해결 프로그램에서 자동으" -"로 처리합니다. 패키지 선택기는 <b>필터</b>, <b>패키지 테이블</b> 및 <b>메뉴의 세 가지 기본 요소로 구성되어 있습니다.</p>" +#. part1 of help text package installation +#: src/NCPkgStrings.cc:121 +msgid "<p><b>Welcome to the package selector</b></p><p>This tool will help you to manage the software on your system. You can install, update or remove single packages, as well as patterns (sets of packages serving certain purpose) or languages. Usually, you do not need to care about package dependencies when installing or removing anything, the solver will do it for you. The package selector consists of three main parts: <b>filters</b>, <b>package table</b> and <b>menu</b>.</p>" +msgstr "<p><b>패키지 선택기 시작</b></p><p>이 도구는 시스템의 소프트웨어를 관리하는 데 도움이 됩니다. 단일 패키지, 패턴(특정 목적에 사용되는 패키지 집합) 또는 언어를 설치, 업데이트 또는 제거할 수 있습니다. 일반적으로 항목을 설치하거나 제거할 때 패키지 종속성에 대해 염려할 필요가 없습니다. 해결 프로그램에서 자동으로 처리합니다. 패키지 선택기는 <b>필터</b>, <b>패키지 테이블</b> 및 <b>메뉴</b>의 세 가지 기본 요소로 구성되어 있습니다.</p>" -#. part of help text package installation -#: src/NCPkgStrings.cc:129 -msgid "" -"<p><b>Filter</b> on left panel is designed for easy orientation in a large " -"amount of packages. Use filters to display only packages from a certain " -"repository or in a selected pattern (for example, Games or C/C++ " -"Development) or to search for particular keywords. More information on " -"filters can be found in <i>How to use filters</i>.</p>" -msgstr "" -"<p>왼쪽 패널의 <b>필터</b>는 다수의 패키지에서 편리하게 탐색하도록 설계되었습" -"니다. 필터를 사용하여 특정 리포지토리나 선택한 패턴(예: 게임 또는 C/C++ 개발)" -"의 패키지만 표시하거나 특정 키워드를 검색하십시오. 필터에 대한 자세한 내용은 " -"<i>필터 사용 방법</i>에서 확인할 수 있습니다.</p>" +#. part of help text package installation +#: src/NCPkgStrings.cc:129 +msgid "<p><b>Filter</b> on left panel is designed for easy orientation in a large amount of packages. Use filters to display only packages from a certain repository or in a selected pattern (for example, Games or C/C++ Development) or to search for particular keywords. More information on filters can be found in <i>How to use filters</i>.</p>" +msgstr "<p>왼쪽 패널의 <b>필터</b>는 다수의 패키지에서 편리하게 탐색하도록 설계되었습니다. 필터를 사용하여 특정 리포지토리나 선택한 패턴(예: 게임 또는 C/C++ 개발)의 패키지만 표시하거나 특정 키워드를 검색하십시오. 필터에 대한 자세한 내용은 <i>필터 사용 방법</i>에서 확인할 수 있습니다.</p>" -#. additional help text for post installation -#: src/NCPkgStrings.cc:136 -msgid "" -"<p><b>Package table</b> is the main component of the package selector. You " -"will see a list of packages matching the current filter (for example, the " -"selected RPM group or search result). Each line of the package table has " -"several columns:</p>" -msgstr "" -"<p><b>패키지 테이블</b>은 패키지 선택기의 기본 구성요소입니다. 현재 필터와 일" -"치하는 패키지 목록(예: 선택한 RPM 그룹 또는 검색 결과)이 표시됩니다. 패키지 " -"테이블의 각 줄에 다음과 같은 여러 열이 있습니다.</p>" +#. additional help text for post installation +#: src/NCPkgStrings.cc:136 +msgid "<p><b>Package table</b> is the main component of the package selector. You will see a list of packages matching the current filter (for example, the selected RPM group or search result). Each line of the package table has several columns:</p>" +msgstr "<p><b>패키지 테이블</b>은 패키지 선택기의 기본 구성요소입니다. 현재 필터와 일치하는 패키지 목록(예: 선택한 RPM 그룹 또는 검색 결과)이 표시됩니다. 패키지 테이블의 각 줄에 다음과 같은 여러 열이 있습니다.</p>" -#. part2 of help text package installation -#: src/NCPkgStrings.cc:143 -msgid "" -"<ol><li>Package status (for more information see <i>Package Status and " -"Symbols</i>)</li> <li>Package name</li><li>Package summary</li><li>Available " -"version (in some of the configured repositories)</li> <li>Installed version" -"(empty for not yet installed packages)</li> <li>Package size</li></ol>" -msgstr "" -"<ol><li>패키지 상태(자세한 내용은 <i>패키지 상태 및 기호</i> 참조)</li> <li>" -"패키지 이름</li><li>패키지 요약</li><li>사용 가능한 버전(구성된 리포지토리 " -"중 일부)</li> <li>설치된 버전(아직 설치되지 않은 패키지의 경우 비어 있음) <li>패키지 크기</li></ol>" +#. part2 of help text package installation +#: src/NCPkgStrings.cc:143 +msgid "<ol><li>Package status (for more information see <i>Package Status and Symbols</i>)</li> <li>Package name</li><li>Package summary</li><li>Available version (in some of the configured repositories)</li> <li>Installed version(empty for not yet installed packages)</li> <li>Package size</li></ol>" +msgstr "<ol><li>패키지 상태(자세한 내용은 <i>패키지 상태 및 기호</i> 참조)</li> <li>패키지 이름</li><li>패키지 요약</li><li>사용 가능한 버전(구성된 리포지토리 중 일부)</li> <li>설치된 버전(아직 설치되지 않은 패키지의 경우 비어 있음)</li> <li>패키지 크기</li></ol>" -#. part3 of help text package installation -#: src/NCPkgStrings.cc:151 -msgid "" -"<p>The <b>Actions</b> menu below the table allows you to change the status " -"of a selected package (or all packages in the list), for example, to delete " -"a package or select an additional package for installation. The status " -"change can also be done directly by pressing the key specified in the menu " -"item (for detailed information about the package status, see <i>Package " -"Status and Symbols</i>).</p>" -msgstr "" -"<p>테이블 아래의 <b>작업</b> 메뉴를 사용하여 선택한 패키지(또는 목록에 있는 " -"모든 패키지)의 상태를 변경할 수 있습니다. 예를 들어 패키지를 삭제하거나 설치" -"할 추가 패키지를 선택할 수 있습니다. 메뉴 항목에 지정된 키를 눌러 상태를 직" -"접 변경할 수도 있습니다(패키지 상태에 대한 자세한 내용은 <i>패키지 상태 및 기" -"호</i> 참조).</p>" +#. part3 of help text package installation +#: src/NCPkgStrings.cc:151 +msgid "<p>The <b>Actions</b> menu below the table allows you to change the status of a selected package (or all packages in the list), for example, to delete a package or select an additional package for installation. The status change can also be done directly by pressing the key specified in the menu item (for detailed information about the package status, see <i>Package Status and Symbols</i>).</p>" +msgstr "<p>테이블 아래의 <b>작업</b> 메뉴를 사용하여 선택한 패키지(또는 목록에 있는 모든 패키지)의 상태를 변경할 수 있습니다. 예를 들어 패키지를 삭제하거나 설치할 추가 패키지를 선택할 수 있습니다. 메뉴 항목에 지정된 키를 눌러 상태를 직접 변경할 수도 있습니다(패키지 상태에 대한 자세한 내용은 <i>패키지 상태 및 기호</i> 참조).</p>" -#. part4 of help text package installation -#: src/NCPkgStrings.cc:158 -msgid "" -"<p><b>Menu</b> provides functions related to the handling of package " -"dependencies. Display relevant information on packages or perform actions " -"like opening the repository editor. For more information, see <i>Useful " -"Functions in Menu</i>.</p>" -msgstr "" -"<p><b>메뉴</b>는 패키지 종속성 처리와 관련된 기능을 제공합니다. 패키지와 관련" -"된 정보를 표시하거나 리포지토리 편집기 열기 등의 작업을 수행하십시오. 자세한 " -"내용은 <i>메뉴의 유용한 기능</i>을 참조하십시오.</p>" +#. part4 of help text package installation +#: src/NCPkgStrings.cc:158 +msgid "<p><b>Menu</b> provides functions related to the handling of package dependencies. Display relevant information on packages or perform actions like opening the repository editor. For more information, see <i>Useful Functions in Menu</i>.</p>" +msgstr "<p><b>메뉴</b>는 패키지 종속성 처리와 관련된 기능을 제공합니다. 패키지와 관련된 정보를 표시하거나 리포지토리 편집기 열기 등의 작업을 수행하십시오. 자세한 내용은 <i>메뉴의 유용한 기능</i>을 참조하십시오.</p>" -#. the headline of the help window -#: src/NCPkgStrings.cc:165 +#. the headline of the help window +#: src/NCPkgStrings.cc:165 msgid "Package Status and Symbols" msgstr "패키지 상태 및 기호" -#. part 1 of help text package status -#: src/NCPkgStrings.cc:172 -msgid "" -"<p>The package status can be changed using the <i>Actions</i> menu or the " -"keys specified in the menu items. For example, use '+' to install an " -"additional package.</p><p>The \"Taboo\" status means the package should " -"never be installed. On the contrary, the \"Locked\" status means that the " -"installed version of a package should always be kept.</p>" -msgstr "" -"<p><i>작업</i> 메뉴 또는 메뉴 항목에 지정된 키를 사용하여 패키지 상태를 변경" -"할 수 있습니다. 예를 들어 추가 패키지를 설치하려면 '+'를 사용하십시오.</p><p>" -"\"타부\" 상태는 패키지를 설치하면 안 됨을 의미합니다. 반면, \"잠김\" 상태는 " -"설치된 버전의 패키지를 항상 유지해야 함을 의미합니다.</p>" +#. part 1 of help text package status +#: src/NCPkgStrings.cc:172 +msgid "<p>The package status can be changed using the <i>Actions</i> menu or the keys specified in the menu items. For example, use '+' to install an additional package.</p><p>The \"Taboo\" status means the package should never be installed. On the contrary, the \"Locked\" status means that the installed version of a package should always be kept.</p>" +msgstr "<p><i>작업</i> 메뉴 또는 메뉴 항목에 지정된 키를 사용하여 패키지 상태를 변경할 수 있습니다. 예를 들어 추가 패키지를 설치하려면 '+'를 사용하십시오.</p><p>\"타부\" 상태는 패키지를 설치하면 안 됨을 의미합니다. 반면, \"잠김\" 상태는 설치된 버전의 패키지를 항상 유지해야 함을 의미합니다.</p>" -#. part 2 of help text package status -#: src/NCPkgStrings.cc:179 -msgid "" -"<p>You can also use <b>RET</b> or <b>SPACE</b> to toggle the package status. " -"The <i>Actions</i> menu also allows you to change the status for all " -"packages in the list (select 'All Listed Packages').</p>" -msgstr "" -"<p><b>RET</b> 또는 <b>SPACE</b>를 사용하여 패키지 상태를 전환할 수도 있습니" -"다. <i>작업</i> 메뉴에서 목록에 있는 모든 패키지의 상태를 변경할 수도 있습니" -"다('나열된 모든 패키지' 선택).</p>" +#. part 2 of help text package status +#: src/NCPkgStrings.cc:179 +msgid "<p>You can also use <b>RET</b> or <b>SPACE</b> to toggle the package status. The <i>Actions</i> menu also allows you to change the status for all packages in the list (select 'All Listed Packages').</p>" +msgstr "<p><b>RET</b> 또는 <b>SPACE</b>를 사용하여 패키지 상태를 전환할 수도 있습니다. <i>작업</i> 메뉴에서 목록에 있는 모든 패키지의 상태를 변경할 수도 있습니다('나열된 모든 패키지' 선택).</p>" -#. part 3 of help text package status -#: src/NCPkgStrings.cc:185 +#. part 3 of help text package status +#: src/NCPkgStrings.cc:185 msgid "<p>The meaning of the status flags:</p>" msgstr "<p>상태 플래그의 의미:</p>" -#. help text package status -#: src/NCPkgStrings.cc:192 -msgid "" -"<p><b> + </b>: package will be installed</p><p><b>a+ </b>: package will be " -"installed automatically</p><p><b> > </b>: package will be updated<p><b>a> </b>: package will be automatically updated</p><p><b> i </b>: " -"package is installed</p><p><b> - </b>: package will be deleted</p><p><b>---" -"</b>: never install this package (taboo)</p>" -msgstr "" -"<p><b> + </b>: 패키지가 설치됩니다.</p><p><b>a+ </b>: 패키지가 자동으로 설치" -"됩니다.</p><p><b> > </b>: 패키지가 업데이트됩니다.</p><p><b>a> </b>: 패키지" -"가 자동으로 업데이트됩니다.</p><p><b> i </b>: 패키지가 설치되어 있습니다.<p><b> - </b>: 패키지가 삭제됩니다.</p><p><b>---</b>: 패키지를 설치할 수 " -"없습니다(금지).</p>" +#. help text package status +#: src/NCPkgStrings.cc:192 +msgid "<p><b> + </b>: package will be installed</p><p><b>a+ </b>: package will be installed automatically</p><p><b> > </b>: package will be updated</p><p><b>a> </b>: package will be automatically updated</p><p><b> i </b>: package is installed</p><p><b> - </b>: package will be deleted</p><p><b>---</b>: never install this package (taboo)</p>" +msgstr "<p><b> + </b>: 패키지가 설치됩니다.</p><p><b>a+ </b>: 패키지가 자동으로 설치됩니다.</p><p><b> > </b>: 패키지가 업데이트됩니다.</p><p><b>a> </b>: 패키지가 자동으로 업데이트됩니다.</p><p><b> i </b>: 패키지가 설치되어 있습니다.</p><p><b> - </b>: 패키지가 삭제됩니다.</p><p><b>---</b>: 패키지를 설치할 수 없습니다(금지).</p>" -#. help text package status -#: src/NCPkgStrings.cc:199 -msgid "" -"<p><b>-i-</b>: keep the installed version and never update or delete it " -"( package locked )</p><p>Status information for pattern and languages:<p><b> i </b>: All requirements of this pattern/language are satisfied</p>" -msgstr "" -"<p><b>-i-</b>: 설치된 버전을 유지하고 업데이트 또는 삭제하지 않습니다(패키지 " -"잠김).</p><p>패턴 및 언어에 대한 상태 정보:</p><p><b> i </b>: 이 패턴/언어의 " -"모든 요구 사항이 충족되었습니다.</p>" +#. help text package status +#: src/NCPkgStrings.cc:199 +msgid "<p><b>-i-</b>: keep the installed version and never update or delete it ( package locked )</p><p>Status information for pattern and languages:</p><p><b> i </b>: All requirements of this pattern/language are satisfied</p>" +msgstr "<p><b>-i-</b>: 설치된 버전을 유지하고 업데이트 또는 삭제하지 않습니다(패키지 잠김).</p><p>패턴 및 언어에 대한 상태 정보:</p><p><b> i </b>: 이 패턴/언어의 모든 요구 사항이 충족되었습니다.</p>" -#. label for an error popup -#: src/NCPkgStrings.cc:206 +#. label for an error popup +#: src/NCPkgStrings.cc:206 msgid "How to Use Filters" msgstr "필터 사용법" -#. help text package status -#: src/NCPkgStrings.cc:213 -msgid "" -"<p><b>Filter</b> allow you to filter all available packages according to the " -"selected criteria. Package filters are based on package properties " -"(repository, RPM group), package \"containers\" (patterns, languages), " -"package classification or search results. Select the desired filter from the " -"drop-down menu. Specific filters are described below.</p>" -msgstr "" -"<p><b>필터</b>를 사용하면 선택한 기준에 따라 사용 가능한 모든 패키지를 필터링" -"할 수 있습니다. 패키지 필터는 패키지 속성(리포지토리, RPM 그룹), 패키지 \"컨" -"테이너\"(패턴, 언어), 패키지 분류 또는 검색 결과를 기반으로 합니다. 드롭다운 " -"메뉴에서 원하는 필터를 선택하십시오. 아래에서는 특정 필터에 대해 설명합니다." -"</p>" +#. help text package status +#: src/NCPkgStrings.cc:213 +msgid "<p><b>Filter</b> allow you to filter all available packages according to the selected criteria. Package filters are based on package properties (repository, RPM group), package \"containers\" (patterns, languages), package classification or search results. Select the desired filter from the drop-down menu. Specific filters are described below.</p>" +msgstr "<p><b>필터</b>를 사용하면 선택한 기준에 따라 사용 가능한 모든 패키지를 필터링할 수 있습니다. 패키지 필터는 패키지 속성(리포지토리, RPM 그룹), 패키지 \"컨테이너\"(패턴, 언어), 패키지 분류 또는 검색 결과를 기반으로 합니다. 드롭다운 메뉴에서 원하는 필터를 선택하십시오. 아래에서는 특정 필터에 대해 설명합니다.</p>" -#. help text package status -#: src/NCPkgStrings.cc:220 -msgid "" -"<p><b>Patterns</b> describe the features and functions a system should have " -"(for example, X server or Console tools). Each pattern contains a set of " -"packages it requires (must have), recommends (should have) and suggests (may " -"have). If you select a pattern for installation, update, or deletion, the " -"solver will run and change the status of subordinate packages accordingly." -msgstr "" -"<p><b>패턴</b>은 시스템에 있어야 하는 기능 및 특성을 설명합니다(예: X 서버 또" -"는 콘솔 도구). 각 패턴에는 필수, 권장 및 제안 패키지 집합이 포함됩니다. 설" -"치, 업데이트 또는 삭제할 패턴을 선택하면 해결 프로그램에서 종속 패키지를 실행" -"하고 적절하게 상태를 변경합니다.</p>" +#. help text package status +#: src/NCPkgStrings.cc:220 +msgid "<p><b>Patterns</b> describe the features and functions a system should have (for example, X server or Console tools). Each pattern contains a set of packages it requires (must have), recommends (should have) and suggests (may have). If you select a pattern for installation, update, or deletion, the solver will run and change the status of subordinate packages accordingly.</p>" +msgstr "<p><b>패턴</b>은 시스템에 있어야 하는 기능 및 특성을 설명합니다(예: X 서버 또는 콘솔 도구). 각 패턴에는 필수, 권장 및 제안 패키지 집합이 포함됩니다. 설치, 업데이트 또는 삭제할 패턴을 선택하면 해결 프로그램에서 종속 패키지를 실행하고 적절하게 상태를 변경합니다.</p>" -#. help text package status -#: src/NCPkgStrings.cc:227 -msgid "" -"<p><b>Languages</b> are package containers very much like patterns. They " -"contain packages with translations, dictionaries and other language-specific " -"files for a selected language. <b>RPM Groups</b> are not package containers " -"that can be installed. Instead, membership in a certain RPM group is a " -"property of the package itself. They have a hierarchical (tree) structure. " -"The <b>Repositories</b> filter displays packages available from a specific " -"repository. </p>" -msgstr "" -"<p><b>언어</b>는 패턴과 마찬가지로 패키지 컨테이너입니다. 선택한 언어에 대한 " -"번역, 사전 및 기타 언어별 파일이 포함된 패키지가 들어 있습니다. <b>RPM 그룹은 설치할 수 있는 패키지 컨테이너가 아닙니다. 대신, 특정 RPM 그룹의 구성원" -"은 패키지 자체의 속성입니다. 계층(트리) 구조가 있습니다. <b>리포지토리</b> 필" -"터는 특정 리포지토리에서 사용 가능한 패키지를 표시합니다. </p>" +#. help text package status +#: src/NCPkgStrings.cc:227 +msgid "<p><b>Languages</b> are package containers very much like patterns. They contain packages with translations, dictionaries and other language-specific files for a selected language. <b>RPM Groups</b> are not package containers that can be installed. Instead, membership in a certain RPM group is a property of the package itself. They have a hierarchical (tree) structure. The <b>Repositories</b> filter displays packages available from a specific repository. </p>" +msgstr "<p><b>언어</b>는 패턴과 마찬가지로 패키지 컨테이너입니다. 선택한 언어에 대한 번역, 사전 및 기타 언어별 파일이 포함된 패키지가 들어 있습니다. <b>RPM 그룹</b>은 설치할 수 있는 패키지 컨테이너가 아닙니다. 대신, 특정 RPM 그룹의 구성원은 패키지 자체의 속성입니다. 계층(트리) 구조가 있습니다. <b>리포지토리</b> 필터는 특정 리포지토리에서 사용 가능한 패키지를 표시합니다. </p>" -#. help text package search -#: src/NCPkgStrings.cc:234 -msgid "" -"<p>To use the <b>Search</b> filter, enter a keyword (or part of keyword) for " -"the package search. For example, search for all 3D packages using the " -"expression \"3d\". You can also search in package descriptions, RPM provides " -"or requires. Select the appropriate check box and click the 'Search' button." -"</p>" -msgstr "" -"<p><b>검색</b> 필터를 사용하려면 패키지 검색을 위한 키워드(키워드의 일부)를 " -"입력하십시오. 예를 들어 \"3d\" 표현식을 사용하여 모든 3D 패키지를 검색합니" -"다. 패키지 설명, RPM 제공 또는 필요에서 검색할 수도 있습니다. 해당 확인란을 " -"선택하고 '검색' 버튼을 클릭하십시오.</p>" +#. help text package search +#: src/NCPkgStrings.cc:234 +msgid "<p>To use the <b>Search</b> filter, enter a keyword (or part of keyword) for the package search. For example, search for all 3D packages using the expression \"3d\". You can also search in package descriptions, RPM provides or requires. Select the appropriate check box and click the 'Search' button.</p>" +msgstr "<p><b>검색</b> 필터를 사용하려면 패키지 검색을 위한 키워드(키워드의 일부)를 입력하십시오. 예를 들어 \"3d\" 표현식을 사용하여 모든 3D 패키지를 검색합니다. 패키지 설명, RPM 제공 또는 필요에서 검색할 수도 있습니다. 해당 확인란을 선택하고 '검색' 버튼을 클릭하십시오.</p>" -#. help text package status -#: src/NCPkgStrings.cc:241 -msgid "" -"<p>The <b>Installation summary</b> presents an overview of packages whose " -"status has changed during this session (e.g. marked for installation or " -"removal), either by the user or automatically by the solver. The filter " -"<b>Package Classification</b> provides information about <i>Recommended</i>, " -"<i>Suggested</i>, <i>Orphaned</i> and <i>Unneeded</i> packages.</p>" -msgstr "" -"<p><b>설치 요약</b>은 이 세션 중 사용자나 해결 프로그램에 의해 자동으로 상태" -"가 변경된(예: 설치 또는 제거 표시됨) 패키지에 대한 개요를 제공합니다. <b>패키" -"지 분류</b> 필터는 <i>권장</i>, <i>제안</i>, <i>독립</i> 및 <i>불필요</i> 패" -"키지에 대한 정보를 제공합니다.</p>" +#. help text package status +#: src/NCPkgStrings.cc:241 +msgid "<p>The <b>Installation summary</b> presents an overview of packages whose status has changed during this session (e.g. marked for installation or removal), either by the user or automatically by the solver. The filter <b>Package Classification</b> provides information about <i>Recommended</i>, <i>Suggested</i>, <i>Orphaned</i> and <i>Unneeded</i> packages.</p>" +msgstr "<p><b>설치 요약</b>은 이 세션 중 사용자나 해결 프로그램에 의해 자동으로 상태가 변경된(예: 설치 또는 제거 표시됨) 패키지에 대한 개요를 제공합니다. <b>패키지 분류</b> 필터는 <i>권장</i>, <i>제안</i>, <i>독립</i> 및 <i>불필요</i> 패키지에 대한 정보를 제공합니다.</p>" -#. label for an error popup -#: src/NCPkgStrings.cc:248 +#. label for an error popup +#: src/NCPkgStrings.cc:248 msgid "Useful Functions in Menu" msgstr "메뉴의 편리한 기능" -#: src/NCPkgStrings.cc:254 -msgid "" -"<p><b>Dependencies:</b><br> This menu offers various actions related to the " -"handling of package dependencies. By default, package dependencies are " -"checked with every status change. You will be informed about package " -"conflicts in a dialog proposing possible conflict resolutions. To resolve " -"the conflict, select one of the offered solutions and press 'OK -- Try " -"Again'.</p>" -msgstr "" -"<p><b>종속성:</b><br> 이 메뉴는 패키지 종속성 처리와 관련된 다양한 작업을 제" -"공합니다. 기본적으로 패키지 종속성은 상태 변경 시마다 확인됩니다. 가능한 충" -"돌 해결 방법을 제안하는 대화 상자에서 패키지 충돌에 대해 알려줍니다. 충돌을 " -"해결하려면 제공된 솔루션 중 하나를 선택하고 '확인 -- 재시도'를 누르십시오." +#: src/NCPkgStrings.cc:254 +msgid "<p><b>Dependencies:</b><br> This menu offers various actions related to the handling of package dependencies. By default, package dependencies are checked with every status change. You will be informed about package conflicts in a dialog proposing possible conflict resolutions. To resolve the conflict, select one of the offered solutions and press 'OK -- Try Again'.</p>" +msgstr "<p><b>종속성:</b><br> 이 메뉴는 패키지 종속성 처리와 관련된 다양한 작업을 제공합니다. 기본적으로 패키지 종속성은 상태 변경 시마다 확인됩니다. 가능한 충돌 해결 방법을 제안하는 대화 상자에서 패키지 충돌에 대해 알려줍니다. 충돌을 해결하려면 제공된 솔루션 중 하나를 선택하고 '확인 -- 재시도'를 누르십시오.</p>" -#: src/NCPkgStrings.cc:260 -msgid "" -"<p>To disable dependency checking on every status change, toggle " -"<i>Automatic Dependency Check</i> OFF. You can check dependencies manually " -"by selecting <i>Check Dependencies Now</i>. The <i>Verify system</i> entry " -"will check the dependencies of already installed packages and resolve " -"conflicts non-interactively, marking missing packages for automatic " -"installation if necessary. For debugging purposes, use <i>Generate " -"Dependency Solver Testcase</i>. It will dump package dependencies data into " -"the directory <tt>/var/log/YaST2/solverTestcase</tt>. This is usually what " -"you need when asked for a \"solver testcase\" in Bugzilla.</p>" -msgstr "" -"<p>상태 변경 시마다 종속성 확인을 비활성화하려면 <i>자동 종속성 확인</i>을 끄" -"십시오. <i>지금 종속성 확인</i>을 선택하여 수동으로 종속성을 확인할 수 있습니" -"다. <i>시스템 확인</i> 항목은 이미 설치된 패키지의 종속성을 확인하고 필요한 " -"경우 자동 설치되도록 누락된 패키지를 표시하여 비대화형으로 충돌을 해결합니" -"다. 디버그를 위해 <i>종속성 해결 프로그램 테스트 사례 생성</i>을 사용하십시" -"오. 이 옵션은 패키지 종속성 데이터를 <tt>/var/log/YaST2/solverTestcase</tt> " -"디렉토리에 덤프합니다. 일반적으로 Bugzilla에서 \"해결 프로그램 테스트 사례" -"\"가 요청될 때 필요한 옵션입니다.</p>" +#: src/NCPkgStrings.cc:260 +msgid "<p>To disable dependency checking on every status change, toggle <i>Automatic Dependency Check</i> OFF. You can check dependencies manually by selecting <i>Check Dependencies Now</i>. The <i>Verify system</i> entry will check the dependencies of already installed packages and resolve conflicts non-interactively, marking missing packages for automatic installation if necessary. For debugging purposes, use <i>Generate Dependency Solver Testcase</i>. It will dump package dependencies data into the directory <tt>/var/log/YaST2/solverTestcase</tt>. This is usually what you need when asked for a \"solver testcase\" in Bugzilla.</p>" +msgstr "<p>상태 변경 시마다 종속성 확인을 비활성화하려면 <i>자동 종속성 확인</i>을 끄십시오. <i>지금 종속성 확인</i>을 선택하여 수동으로 종속성을 확인할 수 있습니다. <i>시스템 확인</i> 항목은 이미 설치된 패키지의 종속성을 확인하고 필요한 경우 자동 설치되도록 누락된 패키지를 표시하여 비대화형으로 충돌을 해결합니다. 디버그를 위해 <i>종속성 해결 프로그램 테스트 사례 생성</i>을 사용하십시오. 이 옵션은 패키지 종속성 데이터를 <tt>/var/log/YaST2/solverTestcase</tt> 디렉토리에 덤프합니다. 일반적으로 Bugzilla에서 \"해결 프로그램 테스트 사례\"가 요청될 때 필요한 옵션입니다.</p>" -#: src/NCPkgStrings.cc:267 -msgid "" -"<p>Available options for dependency checking are:<br><i>Automatic Dependency " -"Check</i> (see above), <i>Install Recommended Packages</i>: if ON, weak " -"dependencies will be honored, <i>System Verification Mode</i>: repair " -"dependencies of installed packages and solve immediately. Please note: after " -"checking the system with <i>Verify System Now</i> the option <i>System " -"Verification Mode</i> is ON (uncheck the option, if desired). These options " -"are saved in the YaST configuration file <tt>/etc/sysconfig/yast2</tt>.</p>" -msgstr "" -"<p>종속성 검사를 위해 이용 가능한 옵션:<br><i>자동 종속성 검사</i>(위 참조), " -"<i>권장 패키지 설치</i>: 켜져 있는 경우 약한 종속성도 포함됩니다. <i>시스템 " -"확인 모드</i>: 설치된 패키지의 종속성을 복구하고 즉시 해결합니다. 참고: <i>지" -"금 시스템 확인</i>으로 시스템을 검사하고 나면 <i>시스템 확인 모드</i> 옵션이 " -"켜짐 상태가 됩니다(원할 경우 옵션 선택 해제)/ 이 옵션은 YaST 구성 파일 <tt>/" -"etc/sysconfig/yast2</tt>에 저장됩니다.</p>" +#: src/NCPkgStrings.cc:267 +msgid "<p>Available options for dependency checking are:<br><i>Automatic Dependency Check</i> (see above), <i>Install Recommended Packages</i>: if ON, weak dependencies will be honored, <i>System Verification Mode</i>: repair dependencies of installed packages and solve immediately. Please note: after checking the system with <i>Verify System Now</i> the option <i>System Verification Mode</i> is ON (uncheck the option, if desired). These options are saved in the YaST configuration file <tt>/etc/sysconfig/yast2</tt>.</p>" +msgstr "<p>종속성 검사를 위해 이용 가능한 옵션:<br><i>자동 종속성 검사</i>(위 참조), <i>권장 패키지 설치</i>: 켜져 있는 경우 약한 종속성도 포함됩니다. <i>시스템 확인 모드</i>: 설치된 패키지의 종속성을 복구하고 즉시 해결합니다. 참고: <i>지금 시스템 확인</i>으로 시스템을 검사하고 나면 <i>시스템 확인 모드</i> 옵션이 켜짐 상태가 됩니다(원할 경우 옵션 선택 해제)/ 이 옵션은 YaST 구성 파일 <tt>/etc/sysconfig/yast2</tt>에 저장됩니다.</p>" -#: src/NCPkgStrings.cc:279 -msgid "" -"<p>Advanced options:<br> <i>Cleanup when deleting packages</i>: remove " -"dependent unused packages. <i>Allow vendor change</i>: package vendor may " -"differ from vendor of installed package. These options will not be saved, " -"they can only be set in the configuration file of the package library <tt>/" -"etc/zypp/zypp.conf</tt>.</p>" -msgstr "" -"<p>고급 옵션:<br> <i>패키지 삭제 시 정리</i>: 사용하지 않는 종속 패키지를 제" -"거합니다. <i>제조업체 변경 허용</i>: 패키지 제조업체가 설치된 패키지의 제조업" -"체와 다를 수도 있습니다. 이러한 옵션은 저장되지 않습니다. 패키지 라이브러리 " -"<tt>/etc/zypp/zypp.conf</tt>의 구성 파일에서만 설정할 수 있습니다.</p>" +#: src/NCPkgStrings.cc:279 +msgid "<p>Advanced options:<br> <i>Cleanup when deleting packages</i>: remove dependent unused packages. <i>Allow vendor change</i>: package vendor may differ from vendor of installed package. These options will not be saved, they can only be set in the configuration file of the package library <tt>/etc/zypp/zypp.conf</tt>.</p>" +msgstr "<p>고급 옵션:<br> <i>패키지 삭제 시 정리</i>: 사용하지 않는 종속 패키지를 제거합니다. <i>제조업체 변경 허용</i>: 패키지 제조업체가 설치된 패키지의 제조업체와 다를 수도 있습니다. 이러한 옵션은 저장되지 않습니다. 패키지 라이브러리 <tt>/etc/zypp/zypp.conf</tt>의 구성 파일에서만 설정할 수 있습니다.</p>" -#: src/NCPkgStrings.cc:285 -msgid "" -"<p><b>View:</b><br>Choose which information about the selected package will " -"be displayed in the window below the package table. Available options are: " -"package description, technical data (version, size, license etc.) package " -"versions (all available), file list (all files included in the package) and " -"dependencies (provides, requires etc.).</p>" -msgstr "" -"<p><b>보기:</b><br>패키지 테이블 아래의 창에 표시할 선택한 패키지에 대한 정보" -"를 선택합니다. 사용 가능한 옵션은 패키지 설명, 기술 데이터(버전, 크기, 라이센" -"스 등), 패키지 버전(모두 사용 가능), 파일 목록(패키지에 포함된 모든 파일) 및 " -"종속성(제공, 필요 등)입니다.</p>" +#: src/NCPkgStrings.cc:285 +msgid "<p><b>View:</b><br>Choose which information about the selected package will be displayed in the window below the package table. Available options are: package description, technical data (version, size, license etc.) package versions (all available), file list (all files included in the package) and dependencies (provides, requires etc.).</p>" +msgstr "<p><b>보기:</b><br>패키지 테이블 아래의 창에 표시할 선택한 패키지에 대한 정보를 선택합니다. 사용 가능한 옵션은 패키지 설명, 기술 데이터(버전, 크기, 라이센스 등), 패키지 버전(모두 사용 가능), 파일 목록(패키지에 포함된 모든 파일) 및 종속성(제공, 필요 등)입니다.</p>" -#: src/NCPkgStrings.cc:291 -msgid "" -"<p><b>Configuration:</b><br>This menu integrates package selector with the " -"rest of package management utils. From here, you can <b>Launch Repository " -"Manager</b> and edit configured repositories or register to update " -"repository and configure periodic download of available updates (<b>Launch " -"Online Update Configuration</b>). Also, you can pick one of the three " -"possible behaviours of package selector at exit - in <b>Action after Package " -"Installation</b> menu.</p>" -msgstr "" -"<p><b>구성:</b><br>이 메뉴는 패키지 선택기를 나머지 패키지 관리 유틸리티와 통" -"합합니다. 여기서 <b>리포지토리 관리자를 시작</b>하고 구성된 리포지토리 또는 " -"레지스터를 편집하여 리포지토리를 업데이트하고 사용 가능한 업데이트의 정기 다" -"운로드를 구성할 수 있습니다(<b>온라인 업데이트 구성 시작</b>). 또한 종료 시 " -"<b>패키지 설치 후 작업</b> 메뉴에서 패키지 선택기의 세 가지 가능한 동작 중 하" -"나를 선택할 수 있습니다.</p>" +#: src/NCPkgStrings.cc:291 +msgid "<p><b>Configuration:</b><br>This menu integrates package selector with the rest of package management utils. From here, you can <b>Launch Repository Manager</b> and edit configured repositories or register to update repository and configure periodic download of available updates (<b>Launch Online Update Configuration</b>). Also, you can pick one of the three possible behaviours of package selector at exit - in <b>Action after Package Installation</b> menu.</p>" +msgstr "<p><b>구성:</b><br>이 메뉴는 패키지 선택기를 나머지 패키지 관리 유틸리티와 통합합니다. 여기서 <b>리포지토리 관리자를 시작</b>하고 구성된 리포지토리 또는 레지스터를 편집하여 리포지토리를 업데이트하고 사용 가능한 업데이트의 정기 다운로드를 구성할 수 있습니다(<b>온라인 업데이트 구성 시작</b>). 또한 종료 시 <b>패키지 설치 후 작업</b> 메뉴에서 패키지 선택기의 세 가지 가능한 동작 중 하나를 선택할 수 있습니다.</p>" -#: src/NCPkgStrings.cc:296 -msgid "" -"<p><b>Extras:</b><br>Miscellaneous functions reside here. <i>Export Package " -"List to File</i> will dump data on installed packages, patterns and " -"languages into specified XML file. This file can be later read by <i>Import " -"Package List from File</i> option e.g. on different computer. It will bring " -"the set of packages on the target computer into the same state as described " -"in provided XML file. <i>Show Available Disk Space</i> will show a popup " -"table displaying disk usage and free disk space on currently mounted " -"partition.</p>" -msgstr "" -"<p><b>기타:</b><br>여기에는 기타 기능이 있습니다. <i>패키지 목록을 파일로 엑" -"스포트</i>는 설치된 패키지, 패턴 및 언어에 대한 데이터를 지정된 XML 파일로 덤" -"프합니다. 나중에 다른 컴퓨터 등에서 <i>패키지 목록을 파일에서 임포트</i> 옵션" -"을 통해 이 파일을 읽을 수 있습니다. 이 옵션은 대상 컴퓨터의 패키지 집합을 제" -"공된 XML 파일에 설명된 것과 동일한 상태로 가져옵니다. <i>사용 가능한 디스크 " -"공간 표시</i>는 현재 마운트된 파티션에서 사용 가능한 디스크 공간 및 디스크 사" -"용을 표시하는 팝업 테이블을 보여 줍니다.</p>" +#: src/NCPkgStrings.cc:296 +msgid "<p><b>Extras:</b><br>Miscellaneous functions reside here. <i>Export Package List to File</i> will dump data on installed packages, patterns and languages into specified XML file. This file can be later read by <i>Import Package List from File</i> option e.g. on different computer. It will bring the set of packages on the target computer into the same state as described in provided XML file. <i>Show Available Disk Space</i> will show a popup table displaying disk usage and free disk space on currently mounted partition.</p>" +msgstr "<p><b>기타:</b><br>여기에는 기타 기능이 있습니다. <i>패키지 목록을 파일로 엑스포트</i>는 설치된 패키지, 패턴 및 언어에 대한 데이터를 지정된 XML 파일로 덤프합니다. 나중에 다른 컴퓨터 등에서 <i>패키지 목록을 파일에서 임포트</i> 옵션을 통해 이 파일을 읽을 수 있습니다. 이 옵션은 대상 컴퓨터의 패키지 집합을 제공된 XML 파일에 설명된 것과 동일한 상태로 가져옵니다. <i>사용 가능한 디스크 공간 표시</i>는 현재 마운트된 파티션에서 사용 가능한 디스크 공간 및 디스크 사용을 표시하는 팝업 테이블을 보여 줍니다.</p>" -#. label of a frame with search settings -#: src/NCPkgStrings.cc:304 +#. label of a frame with search settings +#: src/NCPkgStrings.cc:304 msgid "&Search in " msgstr "검색 위치(&S)" -#. begin: text/labels for search popups (use unique hotkeys until the end:) -#. text for the package search popup -#: src/NCPkgStrings.cc:312 +#. begin: text/labels for search popups (use unique hotkeys until the end:) +#. text for the package search popup +#: src/NCPkgStrings.cc:312 msgid "Search &Phrase" msgstr "검색 구문(&P)" -#: src/NCPkgStrings.cc:332 +#: src/NCPkgStrings.cc:332 msgid "Code" msgstr "코드" -#: src/NCPkgStrings.cc:338 +#: src/NCPkgStrings.cc:338 msgid "Language" msgstr "언어" -#: src/NCPkgStrings.cc:344 +#: src/NCPkgStrings.cc:344 msgid "URL" msgstr "URL" -#. column header package name (keep it short!) -#: src/NCPkgStrings.cc:352 +#. column header package name (keep it short!) +#: src/NCPkgStrings.cc:352 msgid "Name" msgstr "이름" -#. column header installed package version (keep it short!) -#: src/NCPkgStrings.cc:359 +#. column header installed package version (keep it short!) +#: src/NCPkgStrings.cc:359 msgid "Version" msgstr "버전" -#. column header - repository of the package (e.g. openSUSE 10.3) -#: src/NCPkgStrings.cc:366 +#. column header - repository of the package (e.g. openSUSE 10.3) +#: src/NCPkgStrings.cc:366 msgid "Repository" msgstr "리포지토리" -#. column header available package version (keep it short - use abbreviation!) -#: src/NCPkgStrings.cc:373 +#. column header available package version (keep it short - use abbreviation!) +#: src/NCPkgStrings.cc:373 msgid "Avail. Vers." msgstr "사용 가능한 버전" -#. column header installed package version (keep it short - use abbreviation!) -#: src/NCPkgStrings.cc:380 +#. column header installed package version (keep it short - use abbreviation!) +#: src/NCPkgStrings.cc:380 msgid "Inst. Vers." msgstr "설치된 버전" -#. column header package size (keep it short!) -#: src/NCPkgStrings.cc:395 +#. column header package size (keep it short!) +#: src/NCPkgStrings.cc:395 msgid "Size" msgstr "크기" -#. column header package architecture (keep it short!) -#: src/NCPkgStrings.cc:402 +#. column header package architecture (keep it short!) +#: src/NCPkgStrings.cc:402 msgid "Architecture" msgstr "아키텍처" -#. column header patch kind (keep it short!) -#: src/NCPkgStrings.cc:409 +#. column header patch kind (keep it short!) +#: src/NCPkgStrings.cc:409 msgid "Kind" msgstr "종류" -#. a text for a small popup which is shown during package dependency checking -#: src/NCPkgStrings.cc:416 +#. a text for a small popup which is shown during package dependency checking +#: src/NCPkgStrings.cc:416 msgid "Solving..." msgstr "종속성 점검 중..." -#. a text for a small popup which is shown during writing package selection to a file -#: src/NCPkgStrings.cc:422 +#. a text for a small popup which is shown during writing package selection to a file +#: src/NCPkgStrings.cc:422 msgid "Saving..." msgstr "저장 중..." -#. a text for a samll popup which is shown during loading package selections from a file -#: src/NCPkgStrings.cc:428 +#. a text for a samll popup which is shown during loading package selections from a file +#: src/NCPkgStrings.cc:428 msgid "Loading..." msgstr "로드 중..." -#. the headline of the disk space popup -#: src/NCPkgStrings.cc:435 +#. the headline of the disk space popup +#: src/NCPkgStrings.cc:435 msgid "Disk Usage Overview" msgstr "디스크 사용 개요" -#. column header name of the partition (keep it short!) -#: src/NCPkgStrings.cc:442 +#. column header name of the partition (keep it short!) +#: src/NCPkgStrings.cc:442 msgid "Partition" msgstr "파티션" -#. column header used disk space (keep it short!) -#: src/NCPkgStrings.cc:449 +#. column header used disk space (keep it short!) +#: src/NCPkgStrings.cc:449 msgid "Used" msgstr "사용량" -#. column header free disk space (keep it short!) -#: src/NCPkgStrings.cc:456 +#. column header free disk space (keep it short!) +#: src/NCPkgStrings.cc:456 msgid "Free" msgstr "사용 가능한 공간" -#. column header total disk space (keep it short!) -#: src/NCPkgStrings.cc:463 +#. column header total disk space (keep it short!) +#: src/NCPkgStrings.cc:463 msgid "Total" msgstr "총계" -#. -#: src/NCPkgStrings.cc:470 +#. +#: src/NCPkgStrings.cc:470 msgid "<i>Out of disk space!</i>" msgstr "<i>디스크 공간이 부족합니다.</i>" -#. -#: src/NCPkgStrings.cc:477 +#. +#: src/NCPkgStrings.cc:477 msgid "<b>Disk space is running out!</b>" msgstr "<b>디스크 공간이 거의 찼습니다.</b>" -#. part of a text -#: src/NCPkgStrings.cc:484 +#. part of a text +#: src/NCPkgStrings.cc:484 msgid "needs" msgstr "필요" -#. part of a text -#: src/NCPkgStrings.cc:491 +#. part of a text +#: src/NCPkgStrings.cc:491 msgid "more disk space." msgstr "디스크 공간이 추가로 필요함." -#. part of the package description -#: src/NCPkgStrings.cc:498 +#. part of the package description +#: src/NCPkgStrings.cc:498 msgid "<b>Version: </b>" msgstr "<b>버전: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:505 +#. part of the package description +#: src/NCPkgStrings.cc:505 msgid "<b>Size: </b>" msgstr "<b>크기: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:512 +#. part of the package description +#: src/NCPkgStrings.cc:512 msgid "<b>Installed: </b>" msgstr "<b>설치 날짜: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:519 +#. part of the package description +#: src/NCPkgStrings.cc:519 msgid "<b>Authors: </b>" msgstr "<b>작성자: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:526 +#. part of the package description +#: src/NCPkgStrings.cc:526 msgid "<b>License: </b>" msgstr "<b>라이센스: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:533 +#. part of the package description +#: src/NCPkgStrings.cc:533 msgid "<b>Media No.: </b>" msgstr "<b>미디어 번호:</b>" -#. part of the package description -#: src/NCPkgStrings.cc:540 +#. part of the package description +#: src/NCPkgStrings.cc:540 msgid "<b>Package Group: </b>" msgstr "<b>패키지 그룹: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:547 +#. part of the package description +#: src/NCPkgStrings.cc:547 msgid "<b>Provides: </b>" msgstr "<b>공급자: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:554 +#. part of the package description +#: src/NCPkgStrings.cc:554 msgid "<b>Requires: </b>" msgstr "<b>필수: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:561 +#. part of the package description +#: src/NCPkgStrings.cc:561 msgid "<b>Prerequires: </b>" msgstr "<b>전제조건: </b>" -#. part of the package description -#: src/NCPkgStrings.cc:569 +#. part of the package description +#: src/NCPkgStrings.cc:569 msgid "<b>Conflicts with: </b>" msgstr "<b>충돌: </b>" -#. headline for a list of installed files -#: src/NCPkgStrings.cc:576 +#. headline for a list of installed files +#: src/NCPkgStrings.cc:576 msgid "<i>List of Installed Files:</i><br>" msgstr "<i>설치된 파일 목록:</i><br>" -#: src/NCPkgStrings.cc:582 +#: src/NCPkgStrings.cc:582 msgid "Translations, dictionaries and other language-related files for " msgstr "번역, 사전 및 기타 언어 관련 파일 " -#. the headline of the help popup -#: src/NCPkgStrings.cc:610 +#. the headline of the help popup +#: src/NCPkgStrings.cc:610 msgid "Patch Status and Patch Installation" msgstr "패치 상태 및 패치 설치" -#. help text online udpate -#. Do NOT translate 'recommended' and 'security'! because the patch kind is always shown as english text. -#: src/NCPkgStrings.cc:618 -msgid "" -"<p>General information about patches:</p><p>The patches of kind <b>security are solving security issues and we highly recommend to install it. You " -"should also install <b>recommended</b> patches, they usually contain " -"important bug-fixes. Install <b>feature</b> patches if you are interested in " -"the feature.</p>" -msgstr "" -"<p>패치에 대한 일반 정보:</p><p><b>보안</b> 종류의 패치는 보안 문제를 해결하" -"며 설치하는 것이 좋습니다. 일반적으로 중요한 버그 수정 프로그램이 포함된 <b>" -"권장</b> 패치도 설치해야 합니다. 기능에 관심이 있는 경우 <b>기능</b> 패치를 " -"설치하십시오.</p>" +#. help text online udpate +#. Do NOT translate 'recommended' and 'security'! because the patch kind is always shown as english text. +#: src/NCPkgStrings.cc:618 +msgid "<p>General information about patches:</p><p>The patches of kind <b>security</b> are solving security issues and we highly recommend to install it. You should also install <b>recommended</b> patches, they usually contain important bug-fixes. Install <b>feature</b> patches if you are interested in the feature.</p>" +msgstr "<p>패치에 대한 일반 정보:</p><p><b>보안</b> 종류의 패치는 보안 문제를 해결하며 설치하는 것이 좋습니다. 일반적으로 중요한 버그 수정 프로그램이 포함된 <b>권장</b> 패치도 설치해야 합니다. 기능에 관심이 있는 경우 <b>기능</b> 패치를 설치하십시오.</p>" -#. help text online udpate continue -#: src/NCPkgStrings.cc:625 -msgid "" -"<p>Patches for \"libzypp\" (Package, Patch, Pattern and Product Management) " -"will always get installed first. Other patches must be installed on a second " -"run.</p>" -msgstr "" -"<p>\"libzypp\"에 대한 패치(패키지, 패치, 패턴 및 제품 관리)가 항상 처음에 설" -"치됩니다. 다른 패치는 두 번째 실행에서 설치해야 합니다.</p>" +#. help text online udpate continue +#: src/NCPkgStrings.cc:625 +msgid "<p>Patches for \"libzypp\" (Package, Patch, Pattern and Product Management) will always get installed first. Other patches must be installed on a second run.</p>" +msgstr "<p>\"libzypp\"에 대한 패치(패키지, 패치, 패턴 및 제품 관리)가 항상 처음에 설치됩니다. 다른 패치는 두 번째 실행에서 설치해야 합니다.</p>" -#. help text online udpate continue -#: src/NCPkgStrings.cc:632 -msgid "" -"<p>Meaning of the status flags:</p><p><b>a+ </b>: Patches concerning your " -"installation are preselected. They will be downloaded and installed on your " -"system. If you do not want a certain patch, deselect it with '-'.</p><p><b> " -"i </b>: All requirements of this patch are satisfied.</p><p><b> + </b>: You " -"have selected this patch for installation.</p>" -msgstr "" -"<p>상태 플래그의 의미:</p><p><b>a+ </b>: 설치와 관련된 패치는 미리 선택되어 " -"있습니다. 시스템에 다운로드되고 설치됩니다. 특정 패치를 원하지 않는 경우 " -"'-'를 사용하여 선택 취소하십시오.</p><p><b> i </b>: 이 패치의 모든 요구 사항" -"이 충족되었습니다.</p><p><b> + </b>: 이 패치가 설치되도록 선택했습니다.</p>" +#. help text online udpate continue +#: src/NCPkgStrings.cc:632 +msgid "<p>Meaning of the status flags:</p><p><b>a+ </b>: Patches concerning your installation are preselected. They will be downloaded and installed on your system. If you do not want a certain patch, deselect it with '-'.</p><p><b> i </b>: All requirements of this patch are satisfied.</p><p><b> + </b>: You have selected this patch for installation.</p>" +msgstr "<p>상태 플래그의 의미:</p><p><b>a+ </b>: 설치와 관련된 패치는 미리 선택되어 있습니다. 시스템에 다운로드되고 설치됩니다. 특정 패치를 원하지 않는 경우 '-'를 사용하여 선택 취소하십시오.</p><p><b> i </b>: 이 패치의 모든 요구 사항이 충족되었습니다.</p><p><b> + </b>: 이 패치가 설치되도록 선택했습니다.</p>" -#. help text online udpate continue -#: src/NCPkgStrings.cc:639 -msgid "" -"<p>More details about the status:<br>If there are several patches for a " -"package (or a set of packages) which aren't yet applied to the system all " -"got preselected and have status <b>a+</b>. If one of these patches is " -"deselected with '-' it might show the status <b>i</b> afterwards. This is " -"because any of the other patches concerning the same package(s) is still " -"selected. The newer version(s) of the package(s) will be installed and with " -"it this patch is satisfied. Deselecting of all patches is required if the " -"patches are not wanted.</p>" -msgstr "" -"<p>상태에 대한 세부 정보:<br>아직 시스템에 적용되지 않은 패키지(또는 패키지 " -"집합)에 대한 여러 패치가 있는 경우 모두 미리 선택되며 <b>a+</b> 상태입니다. " -"'-'를 사용하여 패치 중 하나를 선택 취소하는 경우 이후에 <b>i</b> 상태가 표시" -"될 수도 있습니다. 동일한 패키지와 관련된 다른 패치가 여전히 선택되어 있기 때" -"문입니다. 최신 버전의 패키지가 설치되어 이 패치가 충족됩니다. 패치가 불필요" -"한 경우 모든 패치를 선택 취소해야 합니다.</p>" +#. help text online udpate continue +#: src/NCPkgStrings.cc:639 +msgid "<p>More details about the status:<br>If there are several patches for a package (or a set of packages) which aren't yet applied to the system all got preselected and have status <b>a+</b>. If one of these patches is deselected with '-' it might show the status <b>i</b> afterwards. This is because any of the other patches concerning the same package(s) is still selected. The newer version(s) of the package(s) will be installed and with it this patch is satisfied. Deselecting of all patches is required if the patches are not wanted.</p>" +msgstr "<p>상태에 대한 세부 정보:<br>아직 시스템에 적용되지 않은 패키지(또는 패키지 집합)에 대한 여러 패치가 있는 경우 모두 미리 선택되며 <b>a+</b> 상태입니다. '-'를 사용하여 패치 중 하나를 선택 취소하는 경우 이후에 <b>i</b> 상태가 표시될 수도 있습니다. 동일한 패키지와 관련된 다른 패치가 여전히 선택되어 있기 때문입니다. 최신 버전의 패키지가 설치되어 이 패치가 충족됩니다. 패치가 불필요한 경우 모든 패치를 선택 취소해야 합니다.</p>" -#. help text online udpate continue -#: src/NCPkgStrings.cc:646 -msgid "" -"<p>The menus:</p><p>The <b>Filter</b> menu allows to filter the patches, e." -"g. show the 'Installed' ones or list 'Security' patches. It also provides to " -"search for patches.<br>Use the <b>Actions</b> menu to change the status of a " -"patch.<br>The <b>View</b> menu offers the possibility to see which packages " -"are concerned by the patch. Please note: If the filter is 'All Patches' the " -"package list for some patches might be empty. This means no packages are " -"concerned because none of the patch packages is installed on the system." -"<br>The <b>Dependencies</b> menu contains dependencies checks and the " -"'Generate Solver Testcase' entry.</p>" -msgstr "" -"<p>메뉴:</p><p><b>필터</b> 메뉴를 사용하여 패치를 필터링할 수 있습니다. 예를 " -"들어 '설치된' 패치를 표시하거나 '보안' 패치를 나열할 수 있습니다. 또한 패치 " -"검색 기능을 제공합니다.<br><b>작업</b> 메뉴를 사용하여 패치 상태를 변경할 수 " -"있습니다.<br><b>보기</b> 메뉴를 사용하여 패치와 관련된 패키지를 확인할 수 있" -"습니다. 필터가 '모든 패치'인 경우 일부 패치에 대한 패키지 목록이 비어 있을 " -"수 있습니다. 패치 패키지가 시스템에 설치되어 있지 않으므로 관련된 패키지가 없" -"음을 의미합니다.<br><b>종속성</b> 메뉴에는 종속성 확인 및 '해결 프로그램 테스" -"트 사례 생성' 항목이 포함되어 있습니다.</p>" +#. help text online udpate continue +#: src/NCPkgStrings.cc:646 +msgid "<p>The menus:</p><p>The <b>Filter</b> menu allows to filter the patches, e.g. show the 'Installed' ones or list 'Security' patches. It also provides to search for patches.<br>Use the <b>Actions</b> menu to change the status of a patch.<br>The <b>View</b> menu offers the possibility to see which packages are concerned by the patch. Please note: If the filter is 'All Patches' the package list for some patches might be empty. This means no packages are concerned because none of the patch packages is installed on the system.<br>The <b>Dependencies</b> menu contains dependencies checks and the 'Generate Solver Testcase' entry.</p>" +msgstr "<p>메뉴:</p><p><b>필터</b> 메뉴를 사용하여 패치를 필터링할 수 있습니다. 예를 들어 '설치된' 패치를 표시하거나 '보안' 패치를 나열할 수 있습니다. 또한 패치 검색 기능을 제공합니다.<br><b>작업</b> 메뉴를 사용하여 패치 상태를 변경할 수 있습니다.<br><b>보기</b> 메뉴를 사용하여 패치와 관련된 패키지를 확인할 수 있습니다. 필터가 '모든 패치'인 경우 일부 패치에 대한 패키지 목록이 비어 있을 수 있습니다. 패치 패키지가 시스템에 설치되어 있지 않으므로 관련된 패키지가 없음을 의미합니다.<br><b>종속성</b> 메뉴에는 종속성 확인 및 '해결 프로그램 테스트 사례 생성' 항목이 포함되어 있습니다.</p>" -#. label for a warning popup -#: src/NCPkgStrings.cc:655 +#. label for a warning popup +#: src/NCPkgStrings.cc:655 msgid "Warning" msgstr "경고" -#. label for an error popup -#: src/NCPkgStrings.cc:662 +#. label for an error popup +#: src/NCPkgStrings.cc:662 msgid "Error" msgstr "오류" -#. label for a notify popup -#: src/NCPkgStrings.cc:669 +#. label for a notify popup +#: src/NCPkgStrings.cc:669 msgid "Notify" msgstr "알림" -#. the label of an OK button -#: src/NCPkgStrings.cc:677 +#. the label of an OK button +#: src/NCPkgStrings.cc:677 msgid "&OK" msgstr "확인(&O)" -#. begin: the label of the Contiunue button -#: src/NCPkgStrings.cc:684 +#. begin: the label of the Contiunue button +#: src/NCPkgStrings.cc:684 msgid "C&ontinue" msgstr "계속(&O)" -#. the label of the Yes button -#: src/NCPkgStrings.cc:698 +#. the label of the Yes button +#: src/NCPkgStrings.cc:698 msgid "&Yes" msgstr "예(&Y)" -#. the label of the No button -#: src/NCPkgStrings.cc:712 +#. the label of the No button +#: src/NCPkgStrings.cc:712 msgid "&No" msgstr "아니요(&N)" -#. the label of the Solve button - 'try again' implies that user -#. has to make some action (#213602) -#: src/NCPkgStrings.cc:720 +#. the label of the Solve button - 'try again' implies that user +#. has to make some action (#213602) +#: src/NCPkgStrings.cc:720 msgid "&OK -- Try Again" msgstr "확인 -- 재시도(&O)" -#. text for a Notify popup -#: src/NCPkgStrings.cc:728 -msgid "" -"<p>All changes in the package, patch or pattern selection will be lost." -"<br>Really exit?</p>" -msgstr "" -"<p>패키지, 패치 또는 패턴 선택의 모든 변경사항이 손실됩니다.<br>종료하시겠습" -"니까?</p>" +#. text for a Notify popup +#: src/NCPkgStrings.cc:728 +msgid "<p>All changes in the package, patch or pattern selection will be lost.<br>Really exit?</p>" +msgstr "<p>패키지, 패치 또는 패턴 선택의 모든 변경사항이 손실됩니다.<br>종료하시겠습니까?</p>" -#. the label of language table -#: src/NCPkgStrings.cc:736 +#. the label of language table +#: src/NCPkgStrings.cc:736 msgid "Available Languages" msgstr "사용 가능한 언어" -#. the label of language table -#: src/NCPkgStrings.cc:743 +#. the label of language table +#: src/NCPkgStrings.cc:743 msgid "Available Repositories" msgstr "사용 가능한 리포지토리" -#. A label for a list of YOU Patches - keep it short - max 25 chars! -#. (the list shows all patches which are needed) -#. static const std::string value = _( "Installable Patches" ); -#. static const std::string value = _( "Relevant Patches" ); -#: src/NCPkgStrings.cc:753 +#. A label for a list of YOU Patches - keep it short - max 25 chars! +#. (the list shows all patches which are needed) +#. static const std::string value = _( "Installable Patches" ); +#. static const std::string value = _( "Relevant Patches" ); +#: src/NCPkgStrings.cc:753 msgid "Needed Patches" msgstr "필요한 패치" -#. A label for a list of YOU Patches - keep it short - max. 25 chars! -#. (the list shows all patches which are already installed) -#: src/NCPkgStrings.cc:761 +#. A label for a list of YOU Patches - keep it short - max. 25 chars! +#. (the list shows all patches which are already installed) +#: src/NCPkgStrings.cc:761 msgid "Installed Patches" msgstr "설치된 패키지" -#. A common label for a list of YOU Patches - keep it short - max. 25 chars! -#: src/NCPkgStrings.cc:769 +#. A common label for a list of YOU Patches - keep it short - max. 25 chars! +#: src/NCPkgStrings.cc:769 msgid "Online Update Patches" msgstr "온라인 업데이트 패치" -#. the label Filter: Update Problem ( keep it short - max. 25 chars ) -#: src/NCPkgStrings.cc:776 +#. the label Filter: Update Problem ( keep it short - max. 25 chars ) +#: src/NCPkgStrings.cc:776 msgid "Update Problem -- see help" msgstr "업데이트 문제 -- 도움말 참조" -#. the label for Filter: Search results -#: src/NCPkgStrings.cc:783 +#. the label for Filter: Search results +#: src/NCPkgStrings.cc:783 msgid "Search Results" msgstr "검색 결과" -#. the headline of the dependency popup -#: src/NCPkgStrings.cc:790 +#. the headline of the dependency popup +#: src/NCPkgStrings.cc:790 msgid "Package Dependencies" msgstr "패키지 종속성" -#. help text package status -#: src/NCPkgStrings.cc:797 -msgid "" -"<b>Update Problem List</b><br><p>The packages in the list cannot be updated " -"automatically.</p><p>Possible reasons:</p><p>They are obsoleted by other " -"packages.</p><p>There is no newer version to which to update on any " -"installation media.</p><p>They are third-party packages</p><p>Manually " -"select what to do with them. The safest course of action is to delete them." -msgstr "" -"<b>업데이트 문제 목록</b><br><p>이 목록의 패키지는 자동으로 업데이트할 수 없" -"습니다.</p><p>이유:</p><p>이러한 패키지는 다른 패키지에서 더 이상 사용되지 않" -"습니다.</p><p>다른 설치 미디어에서 업데이트할 최신 버전이 없습니다.</p><p>해" -"당 패키지는 타사 패키지입니다.</p><p>수행할 작업을 직접 선택하십시오. 해당 패" -"키지를 삭제하는 것이 가장 안전합니다.</p>" +#. help text package status +#: src/NCPkgStrings.cc:797 +msgid "<b>Update Problem List</b><br><p>The packages in the list cannot be updated automatically.</p><p>Possible reasons:</p><p>They are obsoleted by other packages.</p><p>There is no newer version to which to update on any installation media.</p><p>They are third-party packages</p><p>Manually select what to do with them. The safest course of action is to delete them.</p>" +msgstr "<b>업데이트 문제 목록</b><br><p>이 목록의 패키지는 자동으로 업데이트할 수 없습니다.</p><p>이유:</p><p>이러한 패키지는 다른 패키지에서 더 이상 사용되지 않습니다.</p><p>다른 설치 미디어에서 업데이트할 최신 버전이 없습니다.</p><p>해당 패키지는 타사 패키지입니다.</p><p>수행할 작업을 직접 선택하십시오. 해당 패키지를 삭제하는 것이 가장 안전합니다.</p>" -#. column header source RPM installation (keep it short!) -#: src/NCPkgStrings.cc:804 +#. column header source RPM installation (keep it short!) +#: src/NCPkgStrings.cc:804 msgid "Source" msgstr "원본" -#. menu entry Update List -#: src/NCPkgStrings.cc:812 +#. menu entry Update List +#: src/NCPkgStrings.cc:812 msgid "&Update List" msgstr "업데이트 목록(&U)" -#. part of the patch description -#: src/NCPkgStrings.cc:819 +#. part of the patch description +#: src/NCPkgStrings.cc:819 msgid "<b>Patch: </b>" msgstr "<b>패치: </b>" -#. info line is shown if YOU patch list is empty -#: src/NCPkgStrings.cc:826 +#. info line is shown if YOU patch list is empty +#: src/NCPkgStrings.cc:826 msgid "No patches available" msgstr "사용 가능한 패치가 없습니다." -#: src/NCPkgStrings.cc:832 +#: src/NCPkgStrings.cc:832 msgid "Script" msgstr "스크립트" -#: src/NCPkgStrings.cc:838 +#: src/NCPkgStrings.cc:838 msgid "Incompatible Package Versions" msgstr "호환되지 않는 패키지 버전" -#: src/NCPkgStrings.cc:845 -msgid "" -"<p>You are trying to install multiversion-capable and non-multiversion-" -"capable versions of this package at the same time.</p>" -msgstr "" -"<p>이 패키지의 다중 버전 지원 버전과 다중 버전 미지원 버전을 동시에 설치하려" -"고 합니다.</p>" +#: src/NCPkgStrings.cc:845 +msgid "<p>You are trying to install multiversion-capable and non-multiversion-capable versions of this package at the same time.</p>" +msgstr "<p>이 패키지의 다중 버전 지원 버전과 다중 버전 미지원 버전을 동시에 설치하려고 합니다.</p>" -#: src/NCPkgStrings.cc:854 -msgid "" -"<p>This version is multiversion-capable.</p><p>Press \"Continue\" to install " -"this version and unselect the non-multiversion-capable version, \"Cancel\" " -"to unselect this version and keep the other one.</p>" -msgstr "" -"<p>이 버전은 다중 버전이 지원됩니다.</p><p>이 버전을 설치하고 다중 버전 미지" -"원 버전을 선택 취소하려면 \"계속\"을 누르고, 이 버전을 선택 취소하고 다른 버" -"전을 유지하려면 \"취소\"를 누르십시오.</p>" +#: src/NCPkgStrings.cc:854 +msgid "<p>This version is multiversion-capable.</p><p>Press \"Continue\" to install this version and unselect the non-multiversion-capable version, \"Cancel\" to unselect this version and keep the other one.</p>" +msgstr "<p>이 버전은 다중 버전이 지원됩니다.</p><p>이 버전을 설치하고 다중 버전 미지원 버전을 선택 취소하려면 \"계속\"을 누르고, 이 버전을 선택 취소하고 다른 버전을 유지하려면 \"취소\"를 누르십시오.</p>" -#: src/NCPkgStrings.cc:864 -msgid "" -"<p>This version is not multiversion-capable.</p><p>Press \"Continue\" to " -"install only this version and unselect all other versions, \"Cancel\" to " -"unselect this version and keep the other ones.<p>" -msgstr "" -"<p>이 버전은 다중 버전을 지원하지 않습니다.</p><p>이 버전만 설치하고 다른 버" -"전을 모두 선택 취소하려면 \"계속\"을 누르고, 이 버전을 선택 취소하고 다른 버" -"전을 유지하려면 \"취소\"를 누르십시오.<p>" +#: src/NCPkgStrings.cc:864 +msgid "<p>This version is not multiversion-capable.</p><p>Press \"Continue\" to install only this version and unselect all other versions, \"Cancel\" to unselect this version and keep the other ones.<p>" +msgstr "<p>이 버전은 다중 버전을 지원하지 않습니다.</p><p>이 버전만 설치하고 다른 버전을 모두 선택 취소하려면 \"계속\"을 누르고, 이 버전을 선택 취소하고 다른 버전을 유지하려면 \"취소\"를 누르십시오.<p>" Modified: branches/SLE12-SP3/yast/ko/po/ncurses.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ncurses.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ncurses.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -5,7 +5,7 @@ msgstr "" "Project-Id-Version: ncurses\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2015-08-25 18:36+0200\n" +"POT-Creation-Date: 2016-08-30 18:28+0200\n" "PO-Revision-Date: 2016-09-19 13:48\n" "Last-Translator: Novell language \n" "Language-Team: Novell language \n" Modified: branches/SLE12-SP3/yast/ko/po/network.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/network.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/network.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,114 +14,112 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Commandline help title -#: src/clients/dns.rb:63 +#. Commandline help title +#: src/clients/dns.rb:63 msgid "DNS Configuration" msgstr "DNS 구성" -#. Commandline command help -#. Commandline command help -#. Commandline command help -#. Commandline command help -#. Commandline command help -#: src/clients/dns.rb:71 src/clients/host.rb:67 src/clients/lan.rb:65 -#: src/clients/lan.rb:76 src/clients/remote.rb:64 +#. Commandline command help +#. Commandline command help +#. Commandline command help +#. Commandline command help +#. Commandline command help +#: src/clients/dns.rb:71 src/clients/host.rb:67 src/clients/lan.rb:65 +#: src/clients/lan.rb:76 src/clients/remote.rb:64 msgid "Display configuration summary" msgstr "설정요약 보기" -#: src/clients/dns.rb:80 +#: src/clients/dns.rb:80 msgid "Edit current settings" msgstr "현재 설정 편집" -#: src/clients/dns.rb:89 +#: src/clients/dns.rb:89 msgid "Used machine hostname" msgstr "사용된 시스템 호스트 이름" -#: src/clients/dns.rb:94 +#: src/clients/dns.rb:94 msgid "IP address of first nameserver." msgstr "첫 번째 이름 서버의 IP 주소." -#: src/clients/dns.rb:99 +#: src/clients/dns.rb:99 msgid "IP address of second nameserver." msgstr "두 번째 이름 서버의 IP 주소." -#: src/clients/dns.rb:104 +#: src/clients/dns.rb:104 msgid "IP address of third nameserver." msgstr "세 번째 이름 서버의 IP 주소." -#. Command line output Headline -#: src/clients/dns.rb:161 +#. Command line output Headline +#: src/clients/dns.rb:161 msgid "DNS Configuration Summary:" msgstr "DNS 구성 요약:" -#. validator: a reference to boolean( string) is expected -#. setter: a reference to void( any) is expected -#. fail message: a string is expected -#: src/clients/dns.rb:186 +#. validator: a reference to boolean( string) is expected +#. setter: a reference to void( any) is expected +#. fail message: a string is expected +#: src/clients/dns.rb:186 msgid "InvalidHostname. " msgstr "호스트 이름이 잘못되었습니다." -#: src/clients/dns.rb:192 src/clients/dns.rb:200 src/clients/dns.rb:208 +#: src/clients/dns.rb:192 src/clients/dns.rb:200 src/clients/dns.rb:208 msgid "Invalid IP. " msgstr "IP가 잘못되었습니다. " -#: src/clients/dns.rb:223 +#: src/clients/dns.rb:223 msgid "Cannot set " msgstr "설정할 수 없음" -#: src/clients/dns.rb:224 +#: src/clients/dns.rb:224 msgid ". Network is managed by NetworkManager." msgstr ". 네트워크가 NetworkManager에서 관리됩니다." -#: src/clients/dns.rb:243 +#: src/clients/dns.rb:243 msgid "Invalid option value." msgstr "옵션 값이 잘못되었습니다." -#: src/clients/dns.rb:252 +#: src/clients/dns.rb:252 msgid "Internal error" msgstr "내부 오류" -#. progress step title -#: src/clients/firewall_stage1_finish.rb:63 +#. progress step title +#: src/clients/firewall_stage1_finish.rb:63 msgid "Writing Firewall Configuration..." msgstr "방화벽 구성 쓰는 중..." -#. Proposal title -#: src/clients/firewall_stage1_proposal.rb:141 +#. Proposal title +#: src/clients/firewall_stage1_proposal.rb:141 msgid "Firewall and SSH" msgstr "방화벽과 SSH" -#. Menu entry label -#: src/clients/firewall_stage1_proposal.rb:143 +#. Menu entry label +#: src/clients/firewall_stage1_proposal.rb:143 msgid "&Firewall and SSH" msgstr "방화벽과 SSH(&F)" -#: src/clients/firewall_stage1_proposal.rb:156 +#: src/clients/firewall_stage1_proposal.rb:156 msgid "Basic Firewall and SSH Configuration" msgstr "기본 방화벽과 SSH 구성" -#. frame label -#: src/clients/firewall_stage1_proposal.rb:161 +#. frame label +#: src/clients/firewall_stage1_proposal.rb:161 msgid "Firewall and SSH service" msgstr "방화벽과 SSH 서비스" -#. TRANSLATORS: check-box label -#: src/clients/firewall_stage1_proposal.rb:172 +#. TRANSLATORS: check-box label +#: src/clients/firewall_stage1_proposal.rb:172 msgid "Enable Firewall" msgstr "방화벽 활성화" -#. TRANSLATORS: check-box label -#: src/clients/firewall_stage1_proposal.rb:181 +#. TRANSLATORS: check-box label +#: src/clients/firewall_stage1_proposal.rb:181 msgid "Enable SSH Service" msgstr "SSH 서비스 활성화" -#: src/clients/firewall_stage1_proposal.rb:195 +#: src/clients/firewall_stage1_proposal.rb:195 msgid "" "<p><b><big>Firewall and SSH</big></b><br>\n" -"Firewall is a defensive mechanism that protects your computer from network " -"attacks.\n" -"SSH is a service that allows logging into this computer remotely via " -"dedicated\n" +"Firewall is a defensive mechanism that protects your computer from network attacks.\n" +"SSH is a service that allows logging into this computer remotely via dedicated\n" "SSH client</p>" msgstr "" "<p><b><big>방화벽과 SSH</big></b><br>\n" @@ -129,30 +127,26 @@ "방어 시스템입니다. SSH는 이 컴퓨터에 원격으로 로그인할 수 있게 해주는\n" "서비스입니다.</p>" -#: src/clients/firewall_stage1_proposal.rb:201 +#: src/clients/firewall_stage1_proposal.rb:201 msgid "" -"<p>Here you can choose whether the firewall will be enabled or disabled " -"after\n" +"<p>Here you can choose whether the firewall will be enabled or disabled after\n" "the installation. It is recommended to keep it enabled.</p>" msgstr "" "<p>이곳에서 방화벽을 활성화하거나 비활성화하도록 선택할 수 있습니다.\n" "활성화하는 것을 권장합니다.</p>" -#: src/clients/firewall_stage1_proposal.rb:204 +#: src/clients/firewall_stage1_proposal.rb:204 msgid "" -"<p>With enabled firewall, you can decide whether to open firewall port for " -"SSH\n" -"service and allow remote SSH logins. Independently you can also enable SSH " -"service (i.e. it\n" +"<p>With enabled firewall, you can decide whether to open firewall port for SSH\n" +"service and allow remote SSH logins. Independently you can also enable SSH service (i.e. it\n" "will be started on computer boot).</p>" msgstr "" "<p>활성화된 방화벽을 사용하여 SSH 서비스에 대한 방화벽 포트를 열고\n" -"원격 SSH 로그인을 허용할지 여부를 결정할 수 있습니다. 독립적으로 SSH 서비스" -"를 활성화할 수도 있습니다(\n" +"원격 SSH 로그인을 허용할지 여부를 결정할 수 있습니다. 독립적으로 SSH 서비스를 활성화할 수도 있습니다(\n" "즉, 컴퓨터 부트 시 시작됨).</p>" -#. TRANSLATORS: help text -#: src/clients/firewall_stage1_proposal.rb:211 +#. TRANSLATORS: help text +#: src/clients/firewall_stage1_proposal.rb:211 msgid "" "<p>You can also open VNC ports in firewall. It will not enable\n" "the remote administration service on a running system but it is\n" @@ -162,89 +156,89 @@ "원격 관리 서비스를 활성화하지 않고\n" "필요한 경우 설치 관리자에 의해 자동으로 시작됩니다.</p>" -#. anything but enabling the firewall closes this dialog -#. (VNC and SSH checkboxes do nothing) -#: src/clients/firewall_stage1_proposal.rb:284 +#. anything but enabling the firewall closes this dialog +#. (VNC and SSH checkboxes do nothing) +#: src/clients/firewall_stage1_proposal.rb:284 msgid "Firewall will be enabled (disable</a>)" msgstr "방화벽이 활성화됩니다(비활성화</a>)." -#: src/clients/firewall_stage1_proposal.rb:288 +#: src/clients/firewall_stage1_proposal.rb:288 msgid "Firewall will be disabled (enable</a>)" msgstr "방화벽이 비활성화됩니다(활성화</a>)." -#: src/clients/firewall_stage1_proposal.rb:294 +#: src/clients/firewall_stage1_proposal.rb:294 msgid "SSH service will be enabled (disable</a>)" msgstr "SSH 서비스가 활성화됩니다(비활성화</a>)." -#: src/clients/firewall_stage1_proposal.rb:298 +#: src/clients/firewall_stage1_proposal.rb:298 msgid "SSH service will be disabled (enable</a>)" msgstr "SSH 서비스가 비활성화됩니다(활성화</a>)." -#. TRANSLATORS: check-box label -#: src/clients/firewall_stage1_proposal.rb:315 +#. TRANSLATORS: check-box label +#: src/clients/firewall_stage1_proposal.rb:315 msgid "Open SSH Port" msgstr "SSH 포트 열기" -#. TRANSLATORS: check-box label -#: src/clients/firewall_stage1_proposal.rb:329 +#. TRANSLATORS: check-box label +#: src/clients/firewall_stage1_proposal.rb:329 msgid "Open &VNC Ports" msgstr "VNC 포트 열기(&V)" -#. Show VNC port only if installing over VNC -#: src/clients/firewall_stage1_proposal.rb:347 +#. Show VNC port only if installing over VNC +#: src/clients/firewall_stage1_proposal.rb:347 msgid "VNC ports will be open (close</a>)" msgstr "VNC 포트가 열립니다(닫기</a>)." -#: src/clients/firewall_stage1_proposal.rb:349 +#: src/clients/firewall_stage1_proposal.rb:349 msgid "VNC ports will be blocked (open</a>)" msgstr "VNC 포트가 차단됩니다(열기</a>)." -#. Returns the SSH-port part of the firewall proposal description -#. Returns nil if this part should be skipped -#. @return [String] proposal html text -#: src/clients/firewall_stage1_proposal.rb:361 +#. Returns the SSH-port part of the firewall proposal description +#. Returns nil if this part should be skipped +#. @return [String] proposal html text +#: src/clients/firewall_stage1_proposal.rb:361 msgid "SSH port will be open (block</a>)" msgstr "SSH 포트가 열립니다(차단</a>)." -#: src/clients/firewall_stage1_proposal.rb:363 +#: src/clients/firewall_stage1_proposal.rb:363 msgid "SSH port will be blocked (open</a>)" msgstr "SSH 포트가 차단됩니다(열기</a>)." -#. Commandline help title -#. configuration of hosts -#. Hosts dialog caption -#: src/clients/host.rb:57 src/include/network/services/host.rb:75 +#. Commandline help title +#. configuration of hosts +#. Hosts dialog caption +#: src/clients/host.rb:57 src/include/network/services/host.rb:75 msgid "Host Configuration" msgstr "호스트 설정" -#. Command line output Headline -#. configuration of hosts -#: src/clients/host.rb:112 +#. Command line output Headline +#. configuration of hosts +#: src/clients/host.rb:112 msgid "Host Configuration Summary:" msgstr "호스트 구성 요약:" -#. Progress step 1/3 -#: src/clients/inst_do_net_test.rb:107 +#. Progress step 1/3 +#: src/clients/inst_do_net_test.rb:107 msgid "Connecting to Internet..." msgstr "인터넷에 접속 중..." -#. Progress step 2/3 -#: src/clients/inst_do_net_test.rb:109 +#. Progress step 2/3 +#: src/clients/inst_do_net_test.rb:109 msgid "Downloading the latest release notes..." msgstr "최근 배포버전 정보를 내려받는 중입니다..." -#. Progress step 3/3 -#: src/clients/inst_do_net_test.rb:111 +#. Progress step 3/3 +#: src/clients/inst_do_net_test.rb:111 msgid "Closing connection..." msgstr "연결 끊는중..." -#. Test dialog caption -#: src/clients/inst_do_net_test.rb:239 +#. Test dialog caption +#: src/clients/inst_do_net_test.rb:239 msgid "Running Internet Connection Test" msgstr "인터넷 접속 테스트 중" -#. help for dialog "Running Internet Connection Test" -#: src/clients/inst_do_net_test.rb:242 +#. help for dialog "Running Internet Connection Test" +#: src/clients/inst_do_net_test.rb:242 msgid "" "<p>Here, view the progress of the\n" "Internet connection test.</p>\n" @@ -252,8 +246,8 @@ "<p>여기는, 인터넷 접속 테스트의 과정을\n" "을 보여줍니다.</p>\n" -#. help for dialog "Running Internet Connection Test" -#: src/clients/inst_do_net_test.rb:246 +#. help for dialog "Running Internet Connection Test" +#: src/clients/inst_do_net_test.rb:246 msgid "" "<p>The test can be aborted by pressing\n" "<b>Abort Test</b>.</p>\n" @@ -261,8 +255,8 @@ "<p><b>테스트 취소</b>를 누르면 테스트를\n" "중단할 수 있습니다.</p>\n" -#. help for dialog "Running Internet Connection Test" -#: src/clients/inst_do_net_test.rb:254 +#. help for dialog "Running Internet Connection Test" +#: src/clients/inst_do_net_test.rb:254 msgid "" "<p>If the test fails, return to the network configuration\n" "and correct the settings.</p>\n" @@ -270,63 +264,63 @@ "<p>테스트에 실패하면 네트워크 구성으로 돌아가 설정을\n" "수정하십시오.</p>\n" -#. Label for result of internet test -#: src/clients/inst_do_net_test.rb:288 +#. Label for result of internet test +#: src/clients/inst_do_net_test.rb:288 msgid "Test Result:" msgstr "테스트 결과:" -#. Push Button to abort internet test -#: src/clients/inst_do_net_test.rb:299 +#. Push Button to abort internet test +#: src/clients/inst_do_net_test.rb:299 msgid "&Abort Test" msgstr "테스트 취소(&A)" -#. Frame label: status of internet test -#: src/clients/inst_do_net_test.rb:304 +#. Frame label: status of internet test +#: src/clients/inst_do_net_test.rb:304 msgid "Test Status" msgstr "테스트 상태" -#. Push Button to see logs of internet test -#: src/clients/inst_do_net_test.rb:314 +#. Push Button to see logs of internet test +#: src/clients/inst_do_net_test.rb:314 msgid "&View Logs..." msgstr "로그 보기...(&V)" -#. result of internet test -#: src/clients/inst_do_net_test.rb:351 +#. result of internet test +#: src/clients/inst_do_net_test.rb:351 msgid "Success" msgstr "성공" -#. result of internet test -#: src/clients/inst_do_net_test.rb:355 +#. result of internet test +#: src/clients/inst_do_net_test.rb:355 msgid "Failure" msgstr "실패" -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:365 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:365 msgid "Kernel Network Interfaces" msgstr "커널 네트워크 인터페이스" -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:386 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:386 msgid "Kernel Routing Table" msgstr "커널 라우팅 테이블" -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:406 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:406 msgid "Hostname Lookup" msgstr "호스트 이름 조회" -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:426 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:426 msgid "Kernel Messages" msgstr "커널 메시지들" -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:576 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:576 msgid "Download of Release Notes" msgstr "릴리즈 정보를 다운로드 합니다." -#. popup error message -#: src/clients/inst_do_net_test.rb:719 +#. popup error message +#: src/clients/inst_do_net_test.rb:719 msgid "" "Cannot install downloaded release notes.\n" "RPM signature check failed." @@ -334,19 +328,19 @@ "다운로드한 릴리스 정보를 설치할 수 없습니다.\n" "RPM 서명 확인에 실패했습니다." -#. popup error message -#: src/clients/inst_do_net_test.rb:746 +#. popup error message +#: src/clients/inst_do_net_test.rb:746 msgid "Installation of downloaded release notes failed." msgstr "다운로드한 릴리스 정보 설치에 실패했습니다." -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:780 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:780 msgid "Opening of Connection" msgstr "연결의 개통" -#. popup to inform user about the failure -#. popup to inform user about the failure -#: src/clients/inst_do_net_test.rb:787 src/clients/inst_do_net_test.rb:812 +#. popup to inform user about the failure +#. popup to inform user about the failure +#: src/clients/inst_do_net_test.rb:787 src/clients/inst_do_net_test.rb:812 msgid "" "Connecting to the Internet failed. View\n" "the logs for details.\n" @@ -354,25 +348,20 @@ "인터넷에 접속할 때 실패했습니다. 세부사항\n" "에 대해서는 로그를 보십시오.\n" -#. Fallback for situation that mustn't exist -#: src/clients/inst_do_net_test.rb:870 -msgid "" -"No URL for the release notes defined. Internet test cannot be performed." -msgstr "" -"릴리스 정보의 URL이 정의되어 있지 않습니다. 인터넷 테스트를 수행할 수 없습니" -"다." +#. Fallback for situation that mustn't exist +#: src/clients/inst_do_net_test.rb:870 +msgid "No URL for the release notes defined. Internet test cannot be performed." +msgstr "릴리스 정보의 URL이 정의되어 있지 않습니다. 인터넷 테스트를 수행할 수 없습니다." -#. popup informing user about the failure to retrieve release notes -#. most likely due to server-side error -#: src/clients/inst_do_net_test.rb:882 +#. popup informing user about the failure to retrieve release notes +#. most likely due to server-side error +#: src/clients/inst_do_net_test.rb:882 msgid "" "Download of latest release notes failed due to server-side error. \n" "This does not necessarily imply a faulty network configuration.\n" "\n" -"Click 'Continue' to proceed to the next installation step. To skip any " -"steps\n" -"requiring an internet connection or to get back to your network " -"configuration,\n" +"Click 'Continue' to proceed to the next installation step. To skip any steps\n" +"requiring an internet connection or to get back to your network configuration,\n" "click 'Cancel'.\n" msgstr "" "서버 쪽 오류 때문에 최신 릴리스 정보 다운로드에 실패했습니다. \n" @@ -382,8 +371,8 @@ "단계를 건너뛰거나 네트워크 구성으로 돌아가려면\n" "'취소'를 클릭하십시오.\n" -#. popup to inform user about the failure -#: src/clients/inst_do_net_test.rb:894 +#. popup to inform user about the failure +#: src/clients/inst_do_net_test.rb:894 msgid "" "Download of latest release notes failed. View\n" "the logs for details." @@ -391,13 +380,13 @@ "최근 릴리스 정보를 다운로드하는 데 실패했습니다.\n" "자세한 내용은 로그를 참조하십시오." -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:940 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:940 msgid "Check for Patches" msgstr "패치를 확인하십시오." -#. popup to inform user about the failure -#: src/clients/inst_do_net_test.rb:949 +#. popup to inform user about the failure +#: src/clients/inst_do_net_test.rb:949 msgid "" "Check for latest updates failed. View\n" "the logs for details.\n" @@ -405,103 +394,103 @@ "최근 업데이트 검사가 실패했습니다.\n" "상세한 설명을 위하여 로그를 보십시오.\n" -#. label of combobox where the log is selected -#: src/clients/inst_do_net_test.rb:975 +#. label of combobox where the log is selected +#: src/clients/inst_do_net_test.rb:975 msgid "Closing of Connection" msgstr "연결 끊는중..." -#. Commandline help title -#. Whole configuration of network but without reading and writing. -#. For use with autoinstallation and proposal -#. @param [String] mode if "proposal", NM dialog may be skipped -#. @return sequence result -#: src/clients/lan.rb:57 src/include/network/lan/wizards.rb:99 +#. Commandline help title +#. Whole configuration of network but without reading and writing. +#. For use with autoinstallation and proposal +#. @param [String] mode if "proposal", NM dialog may be skipped +#. @return sequence result +#: src/clients/lan.rb:57 src/include/network/lan/wizards.rb:99 msgid "Network Card Configuration" msgstr "네트워크 카드 구성" -#. Commandline command help -#: src/clients/lan.rb:87 +#. Commandline command help +#: src/clients/lan.rb:87 msgid "Add a network card" msgstr "네트워크 카드 추가" -#: src/clients/lan.rb:99 +#: src/clients/lan.rb:99 msgid "Change existing configuration" msgstr "기존 구성 변경" -#. Commandline command help -#: src/clients/lan.rb:107 +#. Commandline command help +#: src/clients/lan.rb:107 msgid "Delete a network card" msgstr "네트워크 카드 삭제" -#. Commandline option help -#: src/clients/lan.rb:117 +#. Commandline option help +#: src/clients/lan.rb:117 msgid "List only configured cards" msgstr "구성된 카드만 나열합니다." -#. Commandline option help -#: src/clients/lan.rb:121 +#. Commandline option help +#: src/clients/lan.rb:121 msgid "List only unconfigured cards" msgstr "구성되지 않은 카드만 나열합니다." -#. Commandline option help -#: src/clients/lan.rb:127 +#. Commandline option help +#: src/clients/lan.rb:127 msgid "Device identifier" msgstr "장치 인식자" -#. Commandline option help -#: src/clients/lan.rb:132 +#. Commandline option help +#: src/clients/lan.rb:132 msgid "Config identifier" msgstr "구성 인식자" -#. Commandline option help -#: src/clients/lan.rb:137 +#. Commandline option help +#: src/clients/lan.rb:137 msgid "Use static or dynamic configuration" msgstr "정적 구성 또는 동적 구성 사용" -#: src/clients/lan.rb:141 +#: src/clients/lan.rb:141 msgid "Configuration Name" msgstr "구성 이름" -#. Commandline option help -#: src/clients/lan.rb:146 +#. Commandline option help +#: src/clients/lan.rb:146 msgid "Device IP address" msgstr "IP 주소 장치" -#. Commandline option help -#: src/clients/lan.rb:151 +#. Commandline option help +#: src/clients/lan.rb:151 msgid "Network mask" msgstr "네트워크 마스크" -#. Commandline option help -#: src/clients/lan.rb:156 +#. Commandline option help +#: src/clients/lan.rb:156 msgid "Prefix length" msgstr "접두어 길이" -#. Commandline option help -#: src/clients/lan.rb:161 +#. Commandline option help +#: src/clients/lan.rb:161 msgid "Bond Slaves" msgstr "보조 서버 결합" -#. Commandline option help -#: src/clients/lan.rb:166 +#. Commandline option help +#: src/clients/lan.rb:166 msgid "Ethernet Device for VLAN" msgstr "VLAN용 이더넷 장치" -#. Commandline option help -#: src/clients/lan.rb:171 +#. Commandline option help +#: src/clients/lan.rb:171 msgid "Interfaces for Bridging" msgstr "브리지 인터페이스" -#. see bnc#498993 -#. in case keep_install_network is set to true (in AY) -#. we'll keep values from installation -#. and merge with XML data (bnc#712864) -#: src/clients/lan_auto.rb:108 +#. see bnc#498993 +#. in case keep_install_network is set to true (in AY) +#. we'll keep values from installation +#. and merge with XML data (bnc#712864) +#: src/clients/lan_auto.rb:108 msgid "Configuration Error: uninitialized interface." msgstr "구성 오류: 초기화되지 않은 인터페이스입니다." -#. translators: command line help for network module -#: src/clients/network.rb:60 +#. translators: command line help for network module +#: src/clients/network.rb:60 msgid "" "Configuration of network.\n" "This is only a delegator to network sub-modules.\n" @@ -515,18 +504,18 @@ "\n" "lan\t" -#. Selection box item -#: src/clients/network.rb:67 src/clients/network.rb:108 +#. Selection box item +#: src/clients/network.rb:67 src/clients/network.rb:108 msgid "Network Card" msgstr "네트워크 카드" -#. Network dialog caption -#: src/clients/network.rb:88 +#. Network dialog caption +#: src/clients/network.rb:88 msgid "Network Configuration" msgstr "네트워크 구성" -#. Network dialog help -#: src/clients/network.rb:91 +#. Network dialog help +#: src/clients/network.rb:91 msgid "" "<p>Choose one of the available network modules to configure\n" " the corresponding devices and press <b>Launch</b>.</p>" @@ -534,38 +523,37 @@ "<p>통신 장치를 설정하기 위해서는 하나의 사용 가능한\n" " 네트워크 모듈을선택하고 <b>실행</b>을 누르십시오.</p>" -#. Selection box label -#: src/clients/network.rb:105 +#. Selection box label +#: src/clients/network.rb:105 msgid "&Available Network Modules:" msgstr "사용가능한 네트워크 모듈 (&A):" -#: src/clients/network.rb:123 +#: src/clients/network.rb:123 msgid "&Launch" msgstr "시작(&L)" -#. Commandline help title -#: src/clients/remote.rb:54 +#. Commandline help title +#: src/clients/remote.rb:54 msgid "Remote Access Configuration" msgstr "원격 액세스 구성" -#. Commandline command help -#: src/clients/remote.rb:74 +#. Commandline command help +#: src/clients/remote.rb:74 msgid "Allow remote access" msgstr "원격 액세스 허용" -#. Commandline command help -#: src/clients/remote.rb:85 +#. Commandline command help +#: src/clients/remote.rb:85 msgid "Set 'yes' to allow or 'no' to disallow the remote administration" -msgstr "" -"원격 관리를 허용하려면 '예', 허용하지 않으려면 '아니요'로 설정하십시오." +msgstr "원격 관리를 허용하려면 '예', 허용하지 않으려면 '아니요'로 설정하십시오." -#. Command line output Headline -#: src/clients/remote.rb:126 +#. Command line output Headline +#: src/clients/remote.rb:126 msgid "Remote Access Configuration Summary:" msgstr "원격 액세스 구성 요약:" -#. Command line error message -#: src/clients/remote.rb:146 +#. Command line error message +#: src/clients/remote.rb:146 msgid "" "Please set 'yes' to allow the remote administration\n" "or 'no' to disallow it." @@ -573,384 +561,380 @@ "원격 관리를 허용하려면 '예', 허용하지 않으려면\n" "'아니요'로 설정하십시오." -#. RichText label -#: src/clients/remote_proposal.rb:78 +#. RichText label +#: src/clients/remote_proposal.rb:78 msgid "VNC Remote Administration" msgstr "VNC 원격 관리" -#. Menu label -#: src/clients/remote_proposal.rb:80 +#. Menu label +#: src/clients/remote_proposal.rb:80 msgid "VNC &Remote Administration" msgstr "VNC 원격 관리(&R)" -#. Commandline help title -#. Main routing dialog -#. @return dialog result -#: src/clients/routing.rb:57 src/include/network/services/routing.rb:473 +#. Commandline help title +#. Main routing dialog +#. @return dialog result +#: src/clients/routing.rb:57 src/include/network/services/routing.rb:473 msgid "Routing Configuration" msgstr "라우팅 구성" -#. FIXME -#: src/clients/routing.rb:64 +#. FIXME +#: src/clients/routing.rb:64 msgid "Show complete routing table" msgstr "전체 라우팅 테이블 표시" -#: src/clients/routing.rb:71 +#: src/clients/routing.rb:71 msgid "Show routing table entry for selected destination" msgstr "선택한 대상에 대한 라우팅 테이블 항목 표시" -#: src/clients/routing.rb:79 +#: src/clients/routing.rb:79 msgid "IPv4 and IPv6 forwarding settings" msgstr "IPv4 및 IPv6 전달 설정" -#: src/clients/routing.rb:87 +#: src/clients/routing.rb:87 msgid "IPv4 only forwarding settings" msgstr "IPv4 전용 전달 설정" -#: src/clients/routing.rb:95 +#: src/clients/routing.rb:95 msgid "IPv6 only forwarding settings" msgstr "IPv6 전용 전달 설정" -#: src/clients/routing.rb:103 +#: src/clients/routing.rb:103 msgid "Add new route" msgstr "새 라우트 추가" -#: src/clients/routing.rb:111 +#: src/clients/routing.rb:111 msgid "Edit an existing route" msgstr "기존 라우트 편집" -#: src/clients/routing.rb:119 +#: src/clients/routing.rb:119 msgid "Delete an existing route" msgstr "기존 라우트 삭제" -#: src/clients/routing.rb:130 +#: src/clients/routing.rb:130 msgid "Destination IP address" msgstr "대상 IP 주소" -#: src/clients/routing.rb:132 +#: src/clients/routing.rb:132 msgid "Gateway IP address" msgstr "게이트웨이 IP 주소" -#: src/clients/routing.rb:133 +#: src/clients/routing.rb:133 msgid "Subnet mask" msgstr "서브넷 마스크" -#: src/clients/routing.rb:134 +#: src/clients/routing.rb:134 msgid "Network device" msgstr "네트워크 장치" -#: src/clients/routing.rb:135 +#: src/clients/routing.rb:135 msgid "Additional options" msgstr "추가 옵션" -#: src/clients/routing.rb:136 +#: src/clients/routing.rb:136 msgid "Show current settings" msgstr "현재 설정 표시" -#: src/clients/routing.rb:137 +#: src/clients/routing.rb:137 msgid "Enable IP forwarding" msgstr "IP 전달 활성화" -#: src/clients/routing.rb:138 +#: src/clients/routing.rb:138 msgid "Disable IP forwarding" msgstr "IP 전달 비활성화" -#. main ui function -#. Frame label -#: src/clients/routing.rb:203 src/include/network/services/routing.rb:77 +#. main ui function +#. Frame label +#: src/clients/routing.rb:203 src/include/network/services/routing.rb:77 msgid "Routing Table" msgstr "라우팅 테이블" -#. Table header 1/4 -#: src/clients/routing.rb:206 src/include/network/services/routing.rb:85 +#. Table header 1/4 +#: src/clients/routing.rb:206 src/include/network/services/routing.rb:85 msgid "Destination" msgstr "대상" -#. Table header 2/4 -#: src/clients/routing.rb:207 src/include/network/services/routing.rb:87 +#. Table header 2/4 +#: src/clients/routing.rb:207 src/include/network/services/routing.rb:87 msgid "Gateway" msgstr "게이트웨이" -#. Table header label -#: src/clients/routing.rb:208 src/include/network/lan/address.rb:101 +#. Table header label +#: src/clients/routing.rb:208 src/include/network/lan/address.rb:101 msgid "Netmask" msgstr "넷마스크" -#. Table header 4/4 -#: src/clients/routing.rb:209 src/include/network/lan/complex.rb:75 -#: src/include/network/services/routing.rb:68 -#: src/include/network/services/routing.rb:72 -#: src/include/network/services/routing.rb:91 +#. Table header 4/4 +#: src/clients/routing.rb:209 src/include/network/lan/complex.rb:75 +#: src/include/network/services/routing.rb:68 +#: src/include/network/services/routing.rb:72 +#: src/include/network/services/routing.rb:91 msgid "Device" msgstr "장치" -#: src/clients/routing.rb:210 src/include/network/lan/hardware.rb:408 +#: src/clients/routing.rb:210 src/include/network/lan/hardware.rb:408 msgid "Options" msgstr "옵션" -#. Handler for action "list" -#. @param [Hash{String => String}] options action options -#: src/clients/routing.rb:240 src/clients/routing.rb:378 -#: src/clients/routing.rb:422 +#. Handler for action "list" +#. @param [Hash{String => String}] options action options +#: src/clients/routing.rb:240 src/clients/routing.rb:378 +#: src/clients/routing.rb:422 msgid "No entry for destination '%1' in routing table" msgstr "라우팅 테이블에 대상 '%1'에 대한 항목이 없습니다." -#. translators: %s is "IPv4" or "IPv6" -#: src/clients/routing.rb:262 +#. translators: %s is "IPv4" or "IPv6" +#: src/clients/routing.rb:262 msgid "%s forwarding is enabled" msgstr "%s 전달이 활성화되었습니다." -#. translators: %s is "IPv4" or "IPv6" -#: src/clients/routing.rb:265 +#. translators: %s is "IPv4" or "IPv6" +#: src/clients/routing.rb:265 msgid "%s forwarding is disabled" msgstr "%s 전달이 비활성화되었습니다." -#. translators: %s is "IPv4" or "IPv6" -#: src/clients/routing.rb:269 +#. translators: %s is "IPv4" or "IPv6" +#: src/clients/routing.rb:269 msgid "Enabling %s forwarding..." msgstr "%s 전달을 활성화하는 중입니다." -#. translators: %s is "IPv4" or "IPv6" -#: src/clients/routing.rb:273 +#. translators: %s is "IPv4" or "IPv6" +#: src/clients/routing.rb:273 msgid "Disabling %s forwarding..." msgstr "%s 전달을 비활성화하는 중입니다." -#: src/clients/routing.rb:279 +#: src/clients/routing.rb:279 msgid "IPv4 Forwarding:" msgstr "IPv4 전달:" -#: src/clients/routing.rb:289 +#: src/clients/routing.rb:289 msgid "IPv6 Forwarding:" msgstr "IPv6 전달:" -#: src/clients/routing.rb:299 +#: src/clients/routing.rb:299 msgid "IPv4 and IPv6 Forwarding:" msgstr "IPv4 및 IPv6 전달:" -#: src/clients/routing.rb:321 +#: src/clients/routing.rb:321 msgid "At least destination and gateway IP addresses must be specified." msgstr "적어도 대상 및 게이트웨이 IP 주소를 지정해야 합니다." -#: src/clients/routing.rb:330 +#: src/clients/routing.rb:330 msgid "Adding '%1' destination to routing table ..." msgstr "라우팅 테이블에 '%1' 대상 추가 중..." -#: src/clients/routing.rb:344 +#: src/clients/routing.rb:344 msgid "Destination IP address must be specified." msgstr "대상 IP 주소를 지정해야 합니다." -#: src/clients/routing.rb:349 -msgid "" -"At least one of the following parameters (gateway, netmask, device, options) " -"must be specified" -msgstr "" -"다음 파라미터(게이트웨이, 넷마스크, 장치, 옵션) 중 하나 이상을 지정해야 합니" -"다." +#: src/clients/routing.rb:349 +msgid "At least one of the following parameters (gateway, netmask, device, options) must be specified" +msgstr "다음 파라미터(게이트웨이, 넷마스크, 장치, 옵션) 중 하나 이상을 지정해야 합니다." -#: src/clients/routing.rb:371 +#: src/clients/routing.rb:371 msgid "Updating '%1' destination in routing table ..." msgstr "라우팅 테이블에 '%1' 대상 업데이트 중..." -#: src/clients/routing.rb:414 +#: src/clients/routing.rb:414 msgid "Deleting '%1' destination from routing table ..." msgstr "라우팅 테이블에서 '%1' 대상 삭제 중..." -#. interface summary: WiFi without encryption -#. interface summary: WiFi without encryption -#: src/include/network/complex.rb:101 src/modules/LanItems.rb:1458 +#. interface summary: WiFi without encryption +#. interface summary: WiFi without encryption +#: src/include/network/complex.rb:101 src/modules/LanItems.rb:1458 msgid "Warning: no encryption is used." msgstr "경고: 암호화가 사용되지 않았습니다." -#. Hyperlink: Change the configuration of an interface -#. Hyperlink: Change the configuration of an interface -#: src/include/network/complex.rb:107 src/modules/LanItems.rb:1460 +#. Hyperlink: Change the configuration of an interface +#. Hyperlink: Change the configuration of an interface +#: src/include/network/complex.rb:107 src/modules/LanItems.rb:1460 msgid "Change." msgstr "변경하십시오." -#. Table item -#. this is what used to be Virtual Interface -#. (eth0:1) -#: src/include/network/complex.rb:121 +#. Table item +#. this is what used to be Virtual Interface +#. (eth0:1) +#: src/include/network/complex.rb:121 msgid "Additional Address" msgstr "추가 주소" -#. Summary text -#: src/include/network/complex.rb:171 +#. Summary text +#: src/include/network/complex.rb:171 msgid "Already Configured Devices:" msgstr "이미 구성된 장치:" -#. Summary text -#: src/include/network/complex.rb:176 +#. Summary text +#: src/include/network/complex.rb:176 msgid "Nothing is configured" msgstr "구성된 내용이 없음" -#. Device type label -#: src/include/network/complex.rb:202 +#. Device type label +#: src/include/network/complex.rb:202 msgid "PCMCIA ISDN Card" msgstr "PCMCIA ISDN 카드" -#. Device type label -#: src/include/network/complex.rb:204 +#. Device type label +#: src/include/network/complex.rb:204 msgid "USB ISDN Card" msgstr "USB ISDN 카드" -#. Device type label -#: src/include/network/complex.rb:206 +#. Device type label +#: src/include/network/complex.rb:206 msgid "PCMCIA Ethernet Network Card" msgstr "PCMCIA 이더넷 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:208 +#. Device type label +#: src/include/network/complex.rb:208 msgid "USB Ethernet Network Card" msgstr "USB 이더넷 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:210 +#. Device type label +#: src/include/network/complex.rb:210 msgid "PCMCIA FDDI Network Card" msgstr "PCMCIA FDDI 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:212 +#. Device type label +#: src/include/network/complex.rb:212 msgid "USB FDDI Network Card" msgstr "USB FDDI 네트워크 카드" -#. Device type label -#. Device type label -#: src/include/network/complex.rb:214 src/include/network/complex.rb:218 +#. Device type label +#. Device type label +#: src/include/network/complex.rb:214 src/include/network/complex.rb:218 msgid "PCMCIA ISDN Connection" msgstr "PCMCIA ISDN 연결" -#. Device type label -#. Device type label -#: src/include/network/complex.rb:216 src/include/network/complex.rb:220 +#. Device type label +#. Device type label +#: src/include/network/complex.rb:216 src/include/network/complex.rb:220 msgid "USB ISDN Connection" msgstr "USB ISDN 연결" -#. Device type label -#. Device type label -#: src/include/network/complex.rb:222 src/include/network/complex.rb:226 +#. Device type label +#. Device type label +#: src/include/network/complex.rb:222 src/include/network/complex.rb:226 msgid "PCMCIA Modem" msgstr "PCMCIA 모뎀" -#. Device type label -#. Device type label -#: src/include/network/complex.rb:224 src/include/network/complex.rb:228 +#. Device type label +#. Device type label +#: src/include/network/complex.rb:224 src/include/network/complex.rb:228 msgid "USB Modem" msgstr "USB 모뎀" -#. Device type label -#: src/include/network/complex.rb:230 +#. Device type label +#: src/include/network/complex.rb:230 msgid "PCMCIA Token Ring Network Card" msgstr "PCMCIA 토큰링 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:234 +#. Device type label +#: src/include/network/complex.rb:234 msgid "USB Token Ring Network Card" msgstr "USB 토큰링 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:236 +#. Device type label +#: src/include/network/complex.rb:236 msgid "USB Network Device" msgstr "USB 네트워크 장치" -#. Device type label -#: src/include/network/complex.rb:238 +#. Device type label +#: src/include/network/complex.rb:238 msgid "PCMCIA Wireless Network Card" msgstr "PCMCIA 무선 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:240 +#. Device type label +#: src/include/network/complex.rb:240 msgid "USB Wireless Network Card" msgstr "USB 무선 네트워크 카드" -#. Device type label -#: src/include/network/complex.rb:255 +#. Device type label +#: src/include/network/complex.rb:255 msgid "Unknown Network Device" msgstr "알 수 없는 네트워크 장치" -#. Modem status (%1 is device) -#. ISDN device status (%1 is device) -#. Network card status (%1 is device) -#: src/include/network/complex.rb:309 src/include/network/complex.rb:320 -#: src/include/network/complex.rb:374 +#. Modem status (%1 is device) +#. ISDN device status (%1 is device) +#. Network card status (%1 is device) +#: src/include/network/complex.rb:309 src/include/network/complex.rb:320 +#: src/include/network/complex.rb:374 msgid "Configured as %1" msgstr "%1(으) 구성됨" -#. Modem status (%1 is device, %2 is provider) -#: src/include/network/complex.rb:313 +#. Modem status (%1 is device, %2 is provider) +#: src/include/network/complex.rb:313 msgid "Configured as %1 with provider %2" msgstr "%1은(는) 서비스 제공자가 %2(으)로 구성되었습니다." -#. ISDN status (%1 is device, %2 is provider, %3 protocol) -#: src/include/network/complex.rb:329 +#. ISDN status (%1 is device, %2 is provider, %3 protocol) +#: src/include/network/complex.rb:329 msgid "Configured as %1 with provider %2 (protocol %3)" msgstr "%1은(는) 서비스 제공자가 %2(으)로 구성되었습니다(프로토콜 %3)." -#: src/include/network/complex.rb:343 +#: src/include/network/complex.rb:343 msgid "Configured without address (NONE)" msgstr "주소 없이 구성됨(NONE)" -#. Network card status -#: src/include/network/complex.rb:345 +#. Network card status +#: src/include/network/complex.rb:345 msgid "Configured without an address" msgstr "주소 없이 구성됨" -#. Network card status (%1 is address) -#: src/include/network/complex.rb:348 +#. Network card status (%1 is address) +#: src/include/network/complex.rb:348 msgid "Configured with address %1" msgstr "%1 주소로 구성되었습니다." -#. Network card status (%1 is address, %2 is address) -#: src/include/network/complex.rb:354 +#. Network card status (%1 is address, %2 is address) +#: src/include/network/complex.rb:354 msgid "Configured with address %1 (remote %2)" msgstr "%1 주소(%2 원격)로 구성되었습니다." -#. Network card status (%1 is protocol) -#: src/include/network/complex.rb:361 +#. Network card status (%1 is protocol) +#: src/include/network/complex.rb:361 msgid "Configured with %1" msgstr "%1으(로) 구성됨" -#. Network card status (%1 is device, %2 is address) -#: src/include/network/complex.rb:378 +#. Network card status (%1 is device, %2 is address) +#: src/include/network/complex.rb:378 msgid "Configured as %1 with address %2" msgstr "%1은(는) 주소가 %2(으)로 구성되었습니다." -#. Network card status (%1 is device, %2 is address, %3 is address) -#: src/include/network/complex.rb:383 +#. Network card status (%1 is device, %2 is address, %3 is address) +#: src/include/network/complex.rb:383 msgid "Configured as %1 with address %2 (remote %3)" msgstr "%1은(는) 주소가 %2(으)로 구성되었습니다(원격 %3)." -#. Network card status (%1 is device, %2 is protocol) -#: src/include/network/complex.rb:392 +#. Network card status (%1 is device, %2 is protocol) +#: src/include/network/complex.rb:392 msgid "Configured as %1 with %2" msgstr "%1은(는) %2(으)로 구성되었습니다." -#. Return the device protocol or IP address in case of static config -#. Or indicate that NetworkManager takes over. -#. @param [Hash] devmap device map -#. @return textual device protocol -#: src/include/network/complex.rb:404 +#. Return the device protocol or IP address in case of static config +#. Or indicate that NetworkManager takes over. +#. @param [Hash] devmap device map +#. @return textual device protocol +#: src/include/network/complex.rb:404 msgid "Not configured" msgstr "구성되지 않음" -#. Abbreviation for "The interface is Managed by NetworkManager" -#. ComboBox item -#: src/include/network/complex.rb:406 src/include/network/lan/wireless.rb:434 +#. Abbreviation for "The interface is Managed by NetworkManager" +#. ComboBox item +#: src/include/network/complex.rb:406 src/include/network/lan/wireless.rb:434 msgid "Managed" msgstr "관리됨" -#. Heading text -#: src/include/network/installation/dialogs.rb:59 +#. Heading text +#: src/include/network/installation/dialogs.rb:59 msgid "Enter Provider Password" msgstr "비밀번호 입력" -#. Steps dialog caption -#: src/include/network/installation/dialogs.rb:121 +#. Steps dialog caption +#: src/include/network/installation/dialogs.rb:121 msgid "Test Internet Connection" msgstr "인터넷 연결 테스트" -#. Steps dialog caption 1/2 -#: src/include/network/installation/dialogs.rb:124 +#. Steps dialog caption 1/2 +#: src/include/network/installation/dialogs.rb:124 msgid "" "<p>Here, validate the Internet connection just\n" "configured. The test is entirely optional.</p>" @@ -958,8 +942,8 @@ "<p>여기서, 방금 구성한 인터넷 접속 설정 내용을 확인할 수 있습니다.\n" "테스트는 전체적으로 옵션입니다.</p>" -#. Steps dialog caption 2/2 -#: src/include/network/installation/dialogs.rb:132 +#. Steps dialog caption 2/2 +#: src/include/network/installation/dialogs.rb:132 msgid "" "<p>A successful result enables you to run\n" "the YaST Online Update.</p>" @@ -967,8 +951,8 @@ "<p>여러분은 YaST 온라인 업데이트 운영하면은\n" "성공적으로 결과를 얻을수 있도록 가능하게 합니다.</p>" -#. Label text (keep lines max. 65 chars long) -#: src/include/network/installation/dialogs.rb:139 +#. Label text (keep lines max. 65 chars long) +#: src/include/network/installation/dialogs.rb:139 msgid "" "To validate your Internet access,\n" "activate the test procedure." @@ -976,8 +960,8 @@ "인터넷 사용이 가능한지 확인하기\n" "위해 테스트 과정을 활성화 합니다." -#. Label text (keep lines max. 65 chars long) -#: src/include/network/installation/dialogs.rb:145 +#. Label text (keep lines max. 65 chars long) +#: src/include/network/installation/dialogs.rb:145 msgid "" "To validate your DSL Internet access,\n" "activate the test procedure." @@ -985,8 +969,8 @@ "DSL 인터넷 접속이 가능한지 확인하기 \n" "위해 테스트 과정을 활성화 합니다." -#. Label text (keep lines max. 65 chars long) -#: src/include/network/installation/dialogs.rb:149 +#. Label text (keep lines max. 65 chars long) +#: src/include/network/installation/dialogs.rb:149 msgid "" "To validate your ISDN Internet access,\n" "activate the test procedure." @@ -994,8 +978,8 @@ "ISDN 인터넷 접속이 가능한지 확인하기\n" "위해 테스트 과정을 활성화 합니다." -#. Label text (keep lines max. 65 chars long) -#: src/include/network/installation/dialogs.rb:153 +#. Label text (keep lines max. 65 chars long) +#: src/include/network/installation/dialogs.rb:153 msgid "" "To validate your modem Internet access,\n" "activate the test procedure." @@ -1003,264 +987,263 @@ "모뎀 인터넷 접속이 가능한지 확인하기\n" "위해 테스트 과정을 활성화 합니다." -#. RadioButton label -#: src/include/network/installation/dialogs.rb:175 +#. RadioButton label +#: src/include/network/installation/dialogs.rb:175 msgid "&Yes, Test Connection to the Internet Via" msgstr "예, 인터넷에 시험 접속합니다(&Y)." -#. RadioButton label -#: src/include/network/installation/dialogs.rb:185 +#. RadioButton label +#: src/include/network/installation/dialogs.rb:185 msgid "N&o, Skip This Test" msgstr "아니오, 이 테스트 생략함(&O)" -#. label text - one step of during network test -#: src/include/network/installation/dialogs.rb:196 +#. label text - one step of during network test +#: src/include/network/installation/dialogs.rb:196 msgid "- Connect to the Internet" msgstr "- 인터넷에 시험 접속합니다." -#. label text - one step of during network test -#: src/include/network/installation/dialogs.rb:201 +#. label text - one step of during network test +#: src/include/network/installation/dialogs.rb:201 msgid "- Download latest release notes" msgstr "- 최근 배포버전 정보를 내려받습니다." -#. label text - one step of during network test -#: src/include/network/installation/dialogs.rb:207 +#. label text - one step of during network test +#: src/include/network/installation/dialogs.rb:207 msgid "- Check for latest updates" msgstr "- 최근 업데이트를 확인합니다." -#. label text - one step of during network test -#: src/include/network/installation/dialogs.rb:212 +#. label text - one step of during network test +#: src/include/network/installation/dialogs.rb:212 msgid "- Close connection" msgstr "- 연결 끊김" -#. Heading text -#: src/include/network/installation/dialogs.rb:223 +#. Heading text +#: src/include/network/installation/dialogs.rb:223 msgid "The following steps will be performed:" msgstr "다음 과정이 실행 되었습니다." -#. Frame label -#: src/include/network/installation/dialogs.rb:231 +#. Frame label +#: src/include/network/installation/dialogs.rb:231 msgid "Select:" msgstr "선택:" -#. RadioButton label -#: src/include/network/installation/dialogs.rb:284 +#. RadioButton label +#: src/include/network/installation/dialogs.rb:284 msgid "&Yes, Run Online Update Now" msgstr "예, Yast 온라인 업데이트 패치 지금 실행합니다.(&Y)" -#. RadioButton label -#: src/include/network/installation/dialogs.rb:286 +#. RadioButton label +#: src/include/network/installation/dialogs.rb:286 msgid "N&o, Skip Update" msgstr "아니오, 업데이트를 생략합니다.(&O)" -#. Heading text -#: src/include/network/installation/dialogs.rb:296 +#. Heading text +#: src/include/network/installation/dialogs.rb:296 msgid "Online Updates Available" msgstr "온라인 업데이트 가능" -#. Label text -#: src/include/network/installation/dialogs.rb:299 +#. Label text +#: src/include/network/installation/dialogs.rb:299 msgid "Download and install them via the YaST Online Update?" msgstr "YaST 온라인 업데이트를 통해서 그들을 다운로드하고 설치 하시겠습니까?" -#. Heading -#: src/include/network/installation/dialogs.rb:344 +#. Heading +#: src/include/network/installation/dialogs.rb:344 msgid "Internet Connection Test Logs:" msgstr "인터넷 접속 테스트 로그들:" -#. ComboBox label -#: src/include/network/installation/dialogs.rb:352 +#. ComboBox label +#: src/include/network/installation/dialogs.rb:352 msgid "&Select Log:" msgstr "선택 로그(&S):" -#. Frame label -#: src/include/network/lan/address.rb:85 +#. Frame label +#: src/include/network/lan/address.rb:85 msgid "Additional Addresses" msgstr "추가 주소" -#. Table header label -#: src/include/network/lan/address.rb:97 +#. Table header label +#: src/include/network/lan/address.rb:97 msgid "IPv4 Address Label" msgstr "IPv4 주소 레이블" -#. Table header label -#. Table header label -#: src/include/network/lan/address.rb:99 -#: src/include/network/lan/complex.rb:75 -#: src/include/network/services/host.rb:129 +#. Table header label +#. Table header label +#: src/include/network/lan/address.rb:99 src/include/network/lan/complex.rb:75 +#: src/include/network/services/host.rb:129 msgid "IP Address" msgstr "IP 주소" -#. PushButton label -#. PushButton label -#. PushButton label -#: src/include/network/lan/address.rb:108 -#: src/include/network/services/host.rb:140 -#: src/include/network/services/routing.rb:100 +#. PushButton label +#. PushButton label +#. PushButton label +#: src/include/network/lan/address.rb:108 +#: src/include/network/services/host.rb:140 +#: src/include/network/services/routing.rb:100 msgid "Ad&d" msgstr "추가(&D)" -#. PushButton label -#. PushButton label -#. PushButton label -#: src/include/network/lan/address.rb:110 -#: src/include/network/services/host.rb:142 -#: src/include/network/services/routing.rb:102 +#. PushButton label +#. PushButton label +#. PushButton label +#: src/include/network/lan/address.rb:110 +#: src/include/network/services/host.rb:142 +#: src/include/network/services/routing.rb:102 msgid "&Edit" msgstr "편집(&E)" -#. PushButton label -#. PushButton label -#. PushButton label -#: src/include/network/lan/address.rb:112 -#: src/include/network/services/host.rb:144 -#: src/include/network/services/routing.rb:104 +#. PushButton label +#. PushButton label +#. PushButton label +#: src/include/network/lan/address.rb:112 +#: src/include/network/services/host.rb:144 +#: src/include/network/services/routing.rb:104 msgid "De&lete" msgstr "삭제(&L)" -#: src/include/network/lan/address.rb:133 +#: src/include/network/lan/address.rb:133 msgid "&Name of Interface" msgstr "인터페이스 이름(&N)" -#: src/include/network/lan/address.rb:135 +#: src/include/network/lan/address.rb:135 msgid "<p>TODO kind of vague!</p>" msgstr "<p>애매한 지침입니다!</p>" -#. Combo Box label -#: src/include/network/lan/address.rb:140 +#. Combo Box label +#: src/include/network/lan/address.rb:140 msgid "Assign Interface to Firewall &Zone" msgstr "방화벽 영역에 인터페이스 할당(&Z)" -#. check box label -#: src/include/network/lan/address.rb:148 +#. check box label +#: src/include/network/lan/address.rb:148 msgid "&Mandatory Interface" msgstr "필수 인터페이스(&M)" -#. ComboBox label -#. ComboBox label -#: src/include/network/lan/address.rb:156 -#: src/include/network/lan/hardware.rb:360 +#. ComboBox label +#. ComboBox label +#: src/include/network/lan/address.rb:156 +#: src/include/network/lan/hardware.rb:360 msgid "&Device Type" msgstr "장치 형식(&D)" -#. ComboBox label -#. TextEntry label -#: src/include/network/lan/address.rb:174 -#: src/include/network/lan/hardware.rb:346 +#. ComboBox label +#. TextEntry label +#: src/include/network/lan/address.rb:174 +#: src/include/network/lan/hardware.rb:346 msgid "&Configuration Name" msgstr "구성 이름(&C)" -#: src/include/network/lan/address.rb:183 +#: src/include/network/lan/address.rb:183 msgid "Tunnel owner" msgstr "터널 소유자" -#: src/include/network/lan/address.rb:184 +#: src/include/network/lan/address.rb:184 msgid "Tunnel group" msgstr "터널 그룹" -#: src/include/network/lan/address.rb:193 -#: src/include/network/lan/address.rb:1306 +#: src/include/network/lan/address.rb:193 +#: src/include/network/lan/address.rb:1306 msgid "Bridged Devices" msgstr "브리지 장치" -#: src/include/network/lan/address.rb:213 +#: src/include/network/lan/address.rb:213 msgid "Real Interface for &VLAN" msgstr "VLAN을 위한 실제 인터페이스(&V)" -#: src/include/network/lan/address.rb:216 +#: src/include/network/lan/address.rb:216 msgid "VLAN ID" msgstr "VLAN ID" -#: src/include/network/lan/address.rb:233 +#: src/include/network/lan/address.rb:233 msgid "Bond Slaves and Order" msgstr "결합 슬레이브 및 순서" -#: src/include/network/lan/address.rb:237 +#: src/include/network/lan/address.rb:237 msgid "Up" msgstr "위로 " -#: src/include/network/lan/address.rb:238 +#: src/include/network/lan/address.rb:238 msgid "Down" msgstr "아래로" -#: src/include/network/lan/address.rb:242 +#: src/include/network/lan/address.rb:242 msgid "Bond &Slaves" msgstr "슬레이브 연결(&S)" -#. ComboBox label -#: src/include/network/lan/address.rb:263 +#. ComboBox label +#: src/include/network/lan/address.rb:263 msgid "&Bond Driver Options" msgstr "연결 드라이버 옵션(&B)" -#: src/include/network/lan/address.rb:265 +#: src/include/network/lan/address.rb:265 msgid "<p>Select the bond driver options and edit them if necessary. </p>" msgstr "<p>결합 드라이버 옵션을 선택하고 필요한 경우 편집하십시오. </p>" -#. if (LanItems::type=="br") UI::ReplaceWidget(`rp, `Empty()); -#. else -#: src/include/network/lan/address.rb:290 -#: src/include/network/lan/address.rb:806 +#. if (LanItems::type=="br") UI::ReplaceWidget(`rp, `Empty()); +#. else +#: src/include/network/lan/address.rb:290 +#: src/include/network/lan/address.rb:806 msgid "No Link and IP Setup (Bonding Slaves)" msgstr "링크 및 IP 설정 없음(결합 슬레이브)" -#: src/include/network/lan/address.rb:293 +#: src/include/network/lan/address.rb:293 msgid "Use iBFT Values" msgstr "iBFT 값 사용" -#: src/include/network/lan/address.rb:299 +#: src/include/network/lan/address.rb:299 msgid "Dynamic Address" msgstr "동적 주소" -#: src/include/network/lan/address.rb:315 +#: src/include/network/lan/address.rb:315 msgid "DHCP both version 4 and 6" msgstr "DHCP 버전 4와 버전 6 모두" -#: src/include/network/lan/address.rb:316 +#: src/include/network/lan/address.rb:316 msgid "DHCP version 4 only" msgstr "DHCP 버전 4만" -#: src/include/network/lan/address.rb:317 +#: src/include/network/lan/address.rb:317 msgid "DHCP version 6 only" msgstr "DHCP 버전 6만" -#. TODO : Stat ... Assigned -#: src/include/network/lan/address.rb:328 +#. TODO : Stat ... Assigned +#: src/include/network/lan/address.rb:328 msgid "Statically Assigned IP Address" msgstr "할당된 고정 IP 주소" -#. TextEntry label -#. TextEntry label -#: src/include/network/lan/address.rb:332 -#: src/include/network/lan/virtual.rb:207 -#: src/include/network/services/host.rb:326 +#. TextEntry label +#. TextEntry label +#: src/include/network/lan/address.rb:332 +#: src/include/network/lan/virtual.rb:207 +#: src/include/network/services/host.rb:326 msgid "&IP Address" msgstr "IP 주소(&I)" -#: src/include/network/lan/address.rb:334 +#: src/include/network/lan/address.rb:334 msgid "&Subnet Mask" msgstr "서브넷 마스크(&S)" -#: src/include/network/lan/address.rb:336 +#: src/include/network/lan/address.rb:336 msgid "&Hostname" msgstr "호스트 이름(&H)" -#. Text entry label -#: src/include/network/lan/address.rb:367 +#. Text entry label +#: src/include/network/lan/address.rb:367 msgid "R&emote IP Address" msgstr "원격 IP 주소(&E)" -#. validation error popup -#: src/include/network/lan/address.rb:376 +#. validation error popup +#: src/include/network/lan/address.rb:376 msgid "The remote IP address is invalid." msgstr "원격 IP 주소가 정확하지 않습니다." -#. push button label -#: src/include/network/lan/address.rb:384 +#. push button label +#: src/include/network/lan/address.rb:384 msgid "&S/390" msgstr "S/390(&S)" -#. validate device type, misdetection -#: src/include/network/lan/address.rb:1023 +#. validate device type, misdetection +#: src/include/network/lan/address.rb:1023 msgid "" "You have changed the interface type from the one\n" "that has been detected. This only makes sense\n" @@ -1270,14 +1253,14 @@ "변경했습니다. 검색된 것이 잘못된 경우에만\n" " 이렇게 할 수 있습니다." -#. Popup text -#: src/include/network/lan/address.rb:1043 +#. Popup text +#: src/include/network/lan/address.rb:1043 msgid "Configuration %1 already present." msgstr "%1 구성이 이미 있습니다." -#. If firewall is active and interface in no zone, nothing -#. gets through (#62309) so warn and redirect to details -#: src/include/network/lan/address.rb:1067 +#. If firewall is active and interface in no zone, nothing +#. gets through (#62309) so warn and redirect to details +#: src/include/network/lan/address.rb:1067 msgid "" "The firewall is active, but this interface is not\n" "in any zone. All its traffic would be blocked.\n" @@ -1287,24 +1270,24 @@ "영역에도 없습니다. 모든 해당 트래픽이 차단됩니다.\n" " 지금 인터페이스를 영역에 할당하시겠습니까?" -#. Validator for network masks adresses -#. @param [String] key the widget being validated -#. @param [Hash] event the event being handled -#. @return whether valid -#: src/include/network/lan/address.rb:1087 +#. Validator for network masks adresses +#. @param [String] key the widget being validated +#. @param [Hash] event the event being handled +#. @return whether valid +#: src/include/network/lan/address.rb:1087 msgid "No valid IP address." msgstr "IP 주소가 올바르지 않습니다." -#: src/include/network/lan/address.rb:1094 +#: src/include/network/lan/address.rb:1094 msgid "No valid netmask or prefix length." msgstr "유효한 넷마스크 또는 접두어 길이가 없습니다." -#: src/include/network/lan/address.rb:1102 +#: src/include/network/lan/address.rb:1102 msgid "Invalid hostname." msgstr "호스트 이름이 잘못되었습니다." -#. There'll be no 127.0.0.2 -> remind user to define some hostname -#: src/include/network/lan/address.rb:1109 +#. There'll be no 127.0.0.2 -> remind user to define some hostname +#: src/include/network/lan/address.rb:1109 msgid "" "No hostname has been specified. We recommend to associate \n" "a hostname with a static IP, otherwise the machine name will \n" @@ -1313,14 +1296,13 @@ "Really leave the hostname blank?\n" msgstr "" "호스트 이름이 지정되지 않았습니다. \n" -"호스트 이름을 고정 IP에 연결하는 것이 좋습니다. 그렇지 않으면 활성 네트워크 " -"연결이 없을 경우 \n" +"호스트 이름을 고정 IP에 연결하는 것이 좋습니다. 그렇지 않으면 활성 네트워크 연결이 없을 경우 \n" "컴퓨터 이름을 확인할 수 없습니다.\n" "\n" "호스트 이름을 비워 두시겠습니까?\n" -#. Popup text -#: src/include/network/lan/address.rb:1127 +#. Popup text +#: src/include/network/lan/address.rb:1127 msgid "" "Duplicate IP address detected.\n" "Really continue?\n" @@ -1328,86 +1310,81 @@ "중복된 IP 주소가 검색되었습니다.\n" "계속하시겠습니까?\n" -#. Stores content of IFPLUGD_PRIORITY widget into internal variables -#: src/include/network/lan/address.rb:1186 +#. Stores content of IFPLUGD_PRIORITY widget into internal variables +#: src/include/network/lan/address.rb:1186 msgid "&General" msgstr "일반(&G)" -#. TODO: "MANDATORY", -#: src/include/network/lan/address.rb:1197 +#. TODO: "MANDATORY", +#: src/include/network/lan/address.rb:1197 msgid "Device Activation" msgstr "장치 활성화" -#: src/include/network/lan/address.rb:1201 +#: src/include/network/lan/address.rb:1201 msgid "Firewall Zone" msgstr "방화벽 영역" -#: src/include/network/lan/address.rb:1206 +#: src/include/network/lan/address.rb:1206 msgid "Maximum Transfer Unit (MTU)" msgstr "최대 전송 단위(MTU)" -#. FIXME: we have helps per widget and for the whole -#. tab set but not for one tab -#: src/include/network/lan/address.rb:1216 +#. FIXME: we have helps per widget and for the whole +#. tab set but not for one tab +#: src/include/network/lan/address.rb:1216 msgid "<p>Configure the detailed network card settings here.</p>" msgstr "<p>여기에서는 네트워크 카드 세부 설정을 구성합니다.</p>" -#. FIXME: here it does not complain about missing -#. shortcuts -#: src/include/network/lan/address.rb:1283 +#. FIXME: here it does not complain about missing +#. shortcuts +#: src/include/network/lan/address.rb:1283 msgid "&Address" msgstr "주소(&A)" -#. Address tab help -#: src/include/network/lan/address.rb:1286 +#. Address tab help +#: src/include/network/lan/address.rb:1286 msgid "<p>Configure your IP address.</p>" msgstr "<p>IP 주소를 설정하십시오.</p>" -#: src/include/network/lan/address.rb:1292 +#: src/include/network/lan/address.rb:1292 msgid "&Hardware" msgstr "하드웨어(&H)" -#: src/include/network/lan/address.rb:1299 +#: src/include/network/lan/address.rb:1299 msgid "&Bond Slaves" msgstr "슬레이브 결합(&B)" -#: src/include/network/lan/address.rb:1313 +#: src/include/network/lan/address.rb:1313 msgid "&Wireless" msgstr "무선(&W)" -#. Combo box label - when to activate device (e.g. on boot, manually, never,..) -#: src/include/network/lan/address.rb:1361 +#. Combo box label - when to activate device (e.g. on boot, manually, never,..) +#: src/include/network/lan/address.rb:1361 msgid "Ifplugd Priority" msgstr "Ifplugd 우선순위" -#. Device activation main help. The individual parts will be -#. substituted as %1 -#: src/include/network/lan/address.rb:1367 +#. Device activation main help. The individual parts will be +#. substituted as %1 +#: src/include/network/lan/address.rb:1367 msgid "" "<p><b><big>IFPLUGD PRIORITY</big></b></p> \n" -"<p> All interfaces configured with <b>On Cable Connection</b> and with " -"IFPLUGD_PRIORITY != 0 will be\n" -" used mutually exclusive. If more then one of these interfaces is <b>On " -"Cable Connection</b>\n" -" then we need a way to decide which interface to take up. Therefore we have " -"to\n" +"<p> All interfaces configured with <b>On Cable Connection</b> and with IFPLUGD_PRIORITY != 0 will be\n" +" used mutually exclusive. If more then one of these interfaces is <b>On Cable Connection</b>\n" +" then we need a way to decide which interface to take up. Therefore we have to\n" " set the priority of each interface. </p>\n" msgstr "" "<p><b><big>IFPLUGD PRIORITY</big></b></p> \n" -"<p> <b>케이블 연결로</b> 및 IFPLUGD_PRIORITY != 0을 사용하여 구성된 모든 인터" -"페이스는\n" -" 함께 사용할 수 없습니다. 이러한 인터페이스 중 두 개 이상이 <b>케이블 연결로" -"</b>인 경우\n" +"<p> <b>케이블 연결로</b> 및 IFPLUGD_PRIORITY != 0을 사용하여 구성된 모든 인터페이스는\n" +" 함께 사용할 수 없습니다. 이러한 인터페이스 중 두 개 이상이 <b>케이블 연결로</b>인 경우\n" " 사용할 인터페이스를 결정하는 방법이 필요합니다. 따라서\n" " 각 인터페이스의 우선순위를 설정해야 합니다. </p>\n" -#. Address dialog caption -#: src/include/network/lan/address.rb:1450 +#. Address dialog caption +#: src/include/network/lan/address.rb:1450 msgid "Network Card Setup" msgstr "네트워크 카드 설정" -#. Translators: Warn the user about not desired effect -#: src/include/network/lan/address.rb:1608 +#. Translators: Warn the user about not desired effect +#: src/include/network/lan/address.rb:1608 msgid "" "The interfaces selected share the same physical port and bonding them \n" "may not have the desired effect of redundancy.\n" @@ -1423,8 +1400,8 @@ "\n" "계속하시겠습니까?\n" -#. remove all aliases (bnc#590167) -#: src/include/network/lan/bridge.rb:93 +#. remove all aliases (bnc#590167) +#: src/include/network/lan/bridge.rb:93 msgid "" "At least one selected device is already configured.\n" "Adapt the configuration for bridge?\n" @@ -1432,267 +1409,263 @@ "하나 이상의 선택한 장치가 이미 구성되어 있습니다.\n" "브리지 구성을 적용하시겠습니까?\n" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:55 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:55 msgid "Cisco/Aironet 802.11 wireless ISA/PCI and PCMCIA ethernet cards" msgstr "Cisco/Aironet 802.11 wireless ISA/PCI and PCMCIA ethernet cards" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:62 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:62 msgid "Lucent Orinoco, Prism II based, and similar wireless cards" msgstr "Lucent Orinoco, Prism II 기반 및 유사한 무선 카드" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:69 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:69 msgid "PCMCIA Lucent Orinoco, Prism II based, and similar wireless cards" msgstr "PCMCIA Lucent Orinoco, Prism II 기반 및 유사한 무선 카드" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:76 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:76 msgid "Wireless LAN cards using direct PCI interface" msgstr "Wireless LAN cards using direct PCI interface" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:83 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:83 msgid "Wireless LAN cards using the PLX9052 PCI bridge" msgstr "Wireless LAN cards using the PLX9052 PCI bridge" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:90 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:90 msgid "Wireless device using kernel module p80211.o" msgstr "Wireless device using kernel module p80211.o" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:97 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:97 msgid "Wireless device using kernel module prism2_cs.o" msgstr "Wireless device using kernel module prism2_cs.o" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:104 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:104 msgid "Wireless device using kernel module prism2_pci.o" msgstr "Wireless device using kernel module prism2_pci.o" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:111 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:111 msgid "Wireless device using kernel module prism2_plx.o" msgstr "Wireless device using kernel module prism2_plx.o" -#. Network card name (wireless) -#: src/include/network/lan/cards.rb:118 +#. Network card name (wireless) +#: src/include/network/lan/cards.rb:118 msgid "Wireless device using kernel module prism2_usb.o" msgstr "Wireless device using kernel module prism2_usb.o" -#. Network card name -#: src/include/network/lan/cards.rb:126 +#. Network card name +#: src/include/network/lan/cards.rb:126 msgid "Apple onboard Ethernet mace" msgstr "Apple onboard Ethernet mace" -#. Network card name -#: src/include/network/lan/cards.rb:132 +#. Network card name +#: src/include/network/lan/cards.rb:132 msgid "Apple onboard Ethernet bmac" msgstr "Apple onboard Ethernet bmac" -#. Network card name -#: src/include/network/lan/cards.rb:138 +#. Network card name +#: src/include/network/lan/cards.rb:138 msgid "Apple onboard Ethernet gmac" msgstr "Apple onboard Ethernet gmac" -#. Network card name -#: src/include/network/lan/cards.rb:171 +#. Network card name +#: src/include/network/lan/cards.rb:171 msgid "3Com 3c90x/3c980 B/C series" msgstr "3Com 3c90x/3c980 B/C series" -#. Network card name -#: src/include/network/lan/cards.rb:202 +#. Network card name +#: src/include/network/lan/cards.rb:202 msgid "Apricot Xen-II onboard ethernet" msgstr "Apricot Xen-II onboard ethernet" -#. Network card name -#: src/include/network/lan/cards.rb:208 +#. Network card name +#: src/include/network/lan/cards.rb:208 msgid "AT-LAN-TEC/RealTek pocket adapter" msgstr "AT-LAN-TEC/RealTek pocket adapter" -#. Network card name -#: src/include/network/lan/cards.rb:231 +#. Network card name +#: src/include/network/lan/cards.rb:231 msgid "D-Link DE600 pocket adapter" msgstr "D-Link DE600 pocket adapter" -#. Network card name -#: src/include/network/lan/cards.rb:237 +#. Network card name +#: src/include/network/lan/cards.rb:237 msgid "D-Link DE620 pocket adapter" msgstr "D-Link DE620 pocket adapter" -#. Network card name -#: src/include/network/lan/cards.rb:299 +#. Network card name +#: src/include/network/lan/cards.rb:299 msgid "ICL EtherTeam 16i/32 (experimental)" msgstr "ICL EtherTeam 16i/32 (experimental)" -#. Network card name -#: src/include/network/lan/cards.rb:320 +#. Network card name +#: src/include/network/lan/cards.rb:320 msgid "Intel PRO/100 / EtherExpress PRO/100 (alternate driver)" msgstr "Intel PRO/100 / EtherExpress PRO/100 (alternate driver)" -#. Network card name -#: src/include/network/lan/cards.rb:440 +#. Network card name +#: src/include/network/lan/cards.rb:440 msgid "iSeries Virtual Network" msgstr "iSeries Virtual Network" -#. Network card name -#: src/include/network/lan/cards.rb:448 +#. Network card name +#: src/include/network/lan/cards.rb:448 msgid "IBM Tropic chipset token ring" msgstr "IBM Tropic chipset token ring" -#. Network card name -#: src/include/network/lan/cards.rb:454 +#. Network card name +#: src/include/network/lan/cards.rb:454 msgid "IBM Olympic chipset PCI Token Ring" msgstr "IBM Olympic chipset PCI Token Ring" -#. Network card name -#: src/include/network/lan/cards.rb:460 +#. Network card name +#: src/include/network/lan/cards.rb:460 msgid "IBM OSA Token Ring" msgstr "IBM OSA 토큰 링" -#. Network card name -#: src/include/network/lan/cards.rb:473 +#. Network card name +#: src/include/network/lan/cards.rb:473 msgid "ARCnet COM90xx (standard)" msgstr "ARCnet COM90xx (standard)" -#. Network card name -#: src/include/network/lan/cards.rb:479 +#. Network card name +#: src/include/network/lan/cards.rb:479 msgid "ARCnet COM90xx (in IO-mapped mode)" msgstr "ARCnet COM90xx (in IO-mapped mode)" -#. Network card name -#: src/include/network/lan/cards.rb:510 +#. Network card name +#: src/include/network/lan/cards.rb:510 msgid "Digital Equipment Corporation FDDI controller" msgstr "Digital Equipment Corporation FDDI controller" -#. Network card name -#: src/include/network/lan/cards.rb:516 +#. Network card name +#: src/include/network/lan/cards.rb:516 msgid "SysKonnect FDDI adapter (SK-55xx, SK-58xx, Netelligent 100)" msgstr "SysKonnect FDDI adapter (SK-55xx, SK-58xx, Netelligent 100)" -#. Network subsystem name -#: src/include/network/lan/cards.rb:533 +#. Network subsystem name +#: src/include/network/lan/cards.rb:533 msgid "Channel-to-Channel (CTC) network" msgstr "Channel-to-Channel (CTC) 네트워크" -#. Network subsystem name -#: src/include/network/lan/cards.rb:541 +#. Network subsystem name +#: src/include/network/lan/cards.rb:541 msgid "Hipersockets (HSI) Network" msgstr "하이퍼소켓(HSI) 네트워크" -#. Network subsystem name -#: src/include/network/lan/cards.rb:548 +#. Network subsystem name +#: src/include/network/lan/cards.rb:548 msgid "IBM OSA LCS" msgstr "IBM OSA LCS" -#. Network subsystem name -#: src/include/network/lan/cards.rb:553 +#. Network subsystem name +#: src/include/network/lan/cards.rb:553 msgid "Enterprise System Connector (ESCON) network" msgstr "Enterprise System Connector (ESCON) 네트워크" -#. Network subsystem name -#: src/include/network/lan/cards.rb:561 +#. Network subsystem name +#: src/include/network/lan/cards.rb:561 msgid "Fiberchannel System Connector (FICON) Network" msgstr "FICON(Fiberchannel System Connector) 네트워크" -#. Network subsystem name -#: src/include/network/lan/cards.rb:569 +#. Network subsystem name +#: src/include/network/lan/cards.rb:569 msgid "Inter User Communication Vehicle (IUCV)" msgstr "Inter User Communication Vehicle (IUCV)" -#. Network card name -#: src/include/network/lan/cards.rb:577 +#. Network card name +#: src/include/network/lan/cards.rb:577 msgid "CI7000 adapter" msgstr "CI7000 어뎁터" -#. list > overview = (list >)LanItems::Overview(); -#: src/include/network/lan/cmdline.rb:87 +#. list > overview = (list >)LanItems::Overview(); +#: src/include/network/lan/cmdline.rb:87 msgid "Use \"id\" option to determine device." msgstr "장치를 파악하려면 \"id\" 옵션을 사용하십시오." -#: src/include/network/lan/cmdline.rb:94 +#: src/include/network/lan/cmdline.rb:94 msgid "Invalid value '%s' for \"id\" option." msgstr "\"id\" 옵션에 대한 값 '%s'이(가) 잘못되었습니다." -#: src/include/network/lan/cmdline.rb:100 -msgid "" -"Value of \"id\" is out of range. Use \"list\" option to check max. value of " -"\"id\"." -msgstr "" -"\"id\" 값이 범위를 벗어났습니다. \"id\" 최대값을 검사하려면 \"목록\" 옵션을 " -"사용하십시오." +#: src/include/network/lan/cmdline.rb:100 +msgid "Value of \"id\" is out of range. Use \"list\" option to check max. value of \"id\"." +msgstr "\"id\" 값이 범위를 벗어났습니다. \"id\" 최대값을 검사하려면 \"목록\" 옵션을 사용하십시오." -#. Handler for action "add" -#. @param [Hash{String => String}] options action options -#. Handler for action "edit" -#. @param [Hash{String => String}] options action options -#: src/include/network/lan/cmdline.rb:215 -#: src/include/network/lan/cmdline.rb:266 +#. Handler for action "add" +#. @param [Hash{String => String}] options action options +#. Handler for action "edit" +#. @param [Hash{String => String}] options action options +#: src/include/network/lan/cmdline.rb:215 +#: src/include/network/lan/cmdline.rb:266 msgid "Impossible value for bootproto." msgstr "bootproto에 사용할 수 없는 값입니다." -#: src/include/network/lan/cmdline.rb:224 -#: src/include/network/lan/cmdline.rb:290 +#: src/include/network/lan/cmdline.rb:224 +#: src/include/network/lan/cmdline.rb:290 msgid "Impossible value for startmode." msgstr "startmode에 사용할 수 없는 값입니다." -#: src/include/network/lan/cmdline.rb:272 +#: src/include/network/lan/cmdline.rb:272 msgid "For static configuration, the \"ip\" option is needed." msgstr "고정 구성의 경우 \"ip\" 옵션이 필요합니다." -#. Handler for action "delete" -#. @param [Hash{String => String}] options action options -#: src/include/network/lan/cmdline.rb:318 +#. Handler for action "delete" +#. @param [Hash{String => String}] options action options +#: src/include/network/lan/cmdline.rb:318 msgid "The device was deleted." msgstr "장치가 삭제되었습니다." -#. , :gw6dev encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. ************************************************************************** -#. File: include/network/lan/dialogs.ycp -#. Package: Network configuration -#. Summary: Summary, overview and IO dialogs for network cards config -#. Authors: Michal Svec -#: src/include/network/lan/complex.rb:75 +#. , :gw6dev encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. ************************************************************************** +#. File: include/network/lan/dialogs.ycp +#. Package: Network configuration +#. Summary: Summary, overview and IO dialogs for network cards config +#. Authors: Michal Svec +#: src/include/network/lan/complex.rb:75 msgid "Name" msgstr "이름" -#: src/include/network/lan/complex.rb:75 +#: src/include/network/lan/complex.rb:75 msgid "Note" msgstr "메모" -#: src/include/network/lan/complex.rb:115 +#: src/include/network/lan/complex.rb:115 msgid "Global Options" msgstr "전체 옵션" -#: src/include/network/lan/complex.rb:125 +#: src/include/network/lan/complex.rb:125 msgid "Overview" msgstr "개요" -#. continue-cancel popup, #178848 -#. %1 is a (long) path to a README file -#: src/include/network/lan/complex.rb:153 +#. continue-cancel popup, #178848 +#. %1 is a (long) path to a README file +#: src/include/network/lan/complex.rb:153 msgid "" "A Xen network bridge was detected.\n" "Due to the renaming of network interfaces by the bridge script,\n" @@ -1704,9 +1677,9 @@ " 네트워크 인터페이스가 구성되지 않거나 다시 시작해야 합니다.\n" " 자세한 내용은 %1을(를) 참조하십시오." -#. Write settings dialog -#. @return `abort if aborted and `next otherwise -#: src/include/network/lan/complex.rb:198 +#. Write settings dialog +#. @return `abort if aborted and `next otherwise +#: src/include/network/lan/complex.rb:198 msgid "" "Firmware is needed. Install it from \n" "the add-on CD.\n" @@ -1718,7 +1691,7 @@ "먼저 YaST 소프트웨어 리포지토리에 추가 기능 CD를 추가한 후 \n" "이 구성 대화 상자로 돌아가십시오.\n" -#: src/include/network/lan/complex.rb:212 +#: src/include/network/lan/complex.rb:212 msgid "" "The device needs a firmware to function properly. Usually, it can be\n" "downloaded from your driver vendor's Web page. \n" @@ -1729,32 +1702,27 @@ "장치가 제대로 작동하려면 펌웨어가 필요합니다. 일반적으로\n" "드라이버 제조업체의 웹 페이지에서 다운로드할 수 있습니다. \n" "펌웨어를 이미 다운로드 및 설치한 경우\n" -"<b>계속</b>을 클릭하여 장치를 구성하십시오. 그렇지 않으면 <b>취소</b>를 클릭" -"하고\n" +"<b>계속</b>을 클릭하여 장치를 구성하십시오. 그렇지 않으면 <b>취소</b>를 클릭하고\n" "펌웨어를 설치한 후 이 대화 상자로 돌아가십시오.\n" -#. this is one of 2 places to install packages :-( -#. - kernel modules (InstallKernel): before loaded -#. - wlan firmware: here, just because it is copied from modems -#. #45960 -#: src/include/network/lan/complex.rb:231 +#. this is one of 2 places to install packages :-( +#. - kernel modules (InstallKernel): before loaded +#. - wlan firmware: here, just because it is copied from modems +#. #45960 +#: src/include/network/lan/complex.rb:231 msgid "Installing firmware" msgstr "펌웨어 설치 중" -#: src/include/network/lan/complex.rb:232 -msgid "" -"For successful firmware installation, the 'install_bcm43xx_firmware' script " -"needs to be executed. Execute it now?" -msgstr "" -"펌웨어 설치에 성공한 경우 'install_bcm43xx_firmware' 스크립트를 실행해야 합니" -"다. 지금 실행하시겠습니까?" +#: src/include/network/lan/complex.rb:232 +msgid "For successful firmware installation, the 'install_bcm43xx_firmware' script needs to be executed. Execute it now?" +msgstr "펌웨어 설치에 성공한 경우 'install_bcm43xx_firmware' 스크립트를 실행해야 합니다. 지금 실행하시겠습니까?" -#: src/include/network/lan/complex.rb:246 +#: src/include/network/lan/complex.rb:246 msgid "An error occurred during firmware installation." msgstr "펌웨어를 설치하는 중에 오류가 발생했습니다." -#. Continue-Cancel popup -#: src/include/network/lan/complex.rb:398 +#. Continue-Cancel popup +#: src/include/network/lan/complex.rb:398 msgid "" "The interface is currently set to be managed\n" "by the NetworkManager applet.\n" @@ -1768,49 +1736,49 @@ " 여기서 이 인터페이스에 대한 설정을 편집하면\n" " 인터페이스를 더 이상 NetworkManager로 관리할 수 없습니다.\n" -#. warn user when device to delete has STARTMODE=nfsroot (bnc#433867) -#: src/include/network/lan/complex.rb:450 +#. warn user when device to delete has STARTMODE=nfsroot (bnc#433867) +#: src/include/network/lan/complex.rb:450 msgid "Device you select has STARTMODE=nfsroot. Really delete?" msgstr "선택한 장치는 STARTMODE=nfsroot입니다. 삭제하시겠습니까?" -#. Network setup method dialog caption -#: src/include/network/lan/complex.rb:481 src/include/network/widgets.rb:364 +#. Network setup method dialog caption +#: src/include/network/lan/complex.rb:481 src/include/network/widgets.rb:364 msgid "Network Setup Method" msgstr "네트워크 설정 방법" -#. Evaluates if user should be asked again according dialogs result value -#. -#. it is basically useful if user aborts dialog and he has done some -#. changes already. Calling this function may results in confirmation -#. popup. -#: src/include/network/lan/complex.rb:512 +#. Evaluates if user should be asked again according dialogs result value +#. +#. it is basically useful if user aborts dialog and he has done some +#. changes already. Calling this function may results in confirmation +#. popup. +#: src/include/network/lan/complex.rb:512 msgid "Network Settings" msgstr "네트워크 설정" -#. Frame label -#: src/include/network/lan/dhcp.rb:48 +#. Frame label +#: src/include/network/lan/dhcp.rb:48 msgid "DHCP Client Options" msgstr "DHCP 클라이언트 옵션들" -#. CheckBox label -#. `Left(`CheckBox(`id(`broadcast), _("Request Broad&cast Response"))), -#. `VSpacing(0.49), -#. TextEntry label -#: src/include/network/lan/dhcp.rb:58 +#. CheckBox label +#. `Left(`CheckBox(`id(`broadcast), _("Request Broad&cast Response"))), +#. `VSpacing(0.49), +#. TextEntry label +#: src/include/network/lan/dhcp.rb:58 msgid "DHCP Client &Identifier" msgstr "DHCP 클라이언트 식별자(&I)" -#. TextEntry label -#: src/include/network/lan/dhcp.rb:64 +#. TextEntry label +#: src/include/network/lan/dhcp.rb:64 msgid "&Hostname to Send" msgstr "전송할 호스트 이름(&H)" -#: src/include/network/lan/dhcp.rb:71 +#: src/include/network/lan/dhcp.rb:71 msgid "Change Default Route via DHCP" msgstr "DHCP를 통해 기본 경로 변경" -#. Manual network card setup help 1/4 -#: src/include/network/lan/hardware.rb:91 +#. Manual network card setup help 1/4 +#: src/include/network/lan/hardware.rb:91 msgid "" "<p>Set up hardware-specific options for \n" "your network device here.</p>\n" @@ -1818,9 +1786,9 @@ "<p>네트워크 장치의 하드웨어 관련 옵션을\n" "설정합니다.</p>\n" -#. Manual network card setup help 2/4 -#. translators: do not translated udev, MAC, BusID -#: src/include/network/lan/hardware.rb:100 +#. Manual network card setup help 2/4 +#. translators: do not translated udev, MAC, BusID +#: src/include/network/lan/hardware.rb:100 msgid "" "<p><b>Device Type</b>. Various device types are available, select \n" "one according your needs.</p>" @@ -1828,70 +1796,54 @@ "<p><b>장치 유형</b>. 다양한 장치 유형을 사용할 수 있습니다. \n" "요구에 따라 하나를 선택하십시오.</p>" -#: src/include/network/lan/hardware.rb:108 +#: src/include/network/lan/hardware.rb:108 msgid "" "<p><b>Udev Rules</b> are rules for the kernel device manager that allow\n" -"associating the MAC address or BusID of the network device with its name " -"(for\n" +"associating the MAC address or BusID of the network device with its name (for\n" "example, eth1, wlan0 ) and assures a persistent device name upon reboot.\n" msgstr "" "<p><b>Udev 규칙</b>은 네트워크 장치의 MAC 주소 또는 BusID를\n" "이름(예: eth1, wlan0 )에 연결할 수 있게 하고 재부팅 시 영구적 장치 이름을\n" "보장하는 커널 장치 관리자에 대한 규칙입니다.\n" -#: src/include/network/lan/hardware.rb:114 +#: src/include/network/lan/hardware.rb:114 msgid "" -"<p><b>Show visible port identification</b> allows you to physically identify " -"now configured NIC. \n" -"Set appropriate time, click <b>Blink</b> and LED diodes on you NIC will " -"start blinking for selected time.\n" +"<p><b>Show visible port identification</b> allows you to physically identify now configured NIC. \n" +"Set appropriate time, click <b>Blink</b> and LED diodes on you NIC will start blinking for selected time.\n" "</p>" msgstr "" -"<p><b>볼 수 있는 포트 ID 표시</b>를 사용하면 현재 구성된 NIC를 물리적으로 식" -"별할 수 있습니다. \n" -"적절한 시간을 설정하고 <b>깜박임</b>을 클릭하십시오. 그러면 NIC의 LED 다이오" -"드가 선택한 시간 동안 깜박이기 시작합니다.\n" +"<p><b>볼 수 있는 포트 ID 표시</b>를 사용하면 현재 구성된 NIC를 물리적으로 식별할 수 있습니다. \n" +"적절한 시간을 설정하고 <b>깜박임</b>을 클릭하십시오. 그러면 NIC의 LED 다이오드가 선택한 시간 동안 깜박이기 시작합니다.\n" "</p>" -#. Manual network card setup help 2/4 -#: src/include/network/lan/hardware.rb:127 +#. Manual network card setup help 2/4 +#: src/include/network/lan/hardware.rb:127 msgid "" "<p><b>Kernel Module</b>. Enter the kernel module (driver) name \n" -"for your network device here. If the device is already configured, see if " -"there is more than one driver available for\n" -"your device in the drop-down list. If necessary, choose a driver from the " -"list, but usually the default value works.</p>\n" +"for your network device here. If the device is already configured, see if there is more than one driver available for\n" +"your device in the drop-down list. If necessary, choose a driver from the list, but usually the default value works.</p>\n" msgstr "" "<p><b>커널 모듈</b>. 여기서 네트워크 장치의 커널 모듈(드라이버) 이름을 \n" -"입력합니다. 장치가 이미 구성된 경우 드롭다운 목록에서 장치에 사용할 수 있는 " -"드라이버가\n" -"둘 이상 있는지 확인하십시오. 드라이버는 필요에 따라 목록에서 선택하지만, 일반" -"적으로 기본값이 적용됩니다.</p>\n" +"입력합니다. 장치가 이미 구성된 경우 드롭다운 목록에서 장치에 사용할 수 있는 드라이버가\n" +"둘 이상 있는지 확인하십시오. 드라이버는 필요에 따라 목록에서 선택하지만, 일반적으로 기본값이 적용됩니다.</p>\n" -#. Manual networ card setup help 3/4 -#: src/include/network/lan/hardware.rb:134 +#. Manual networ card setup help 3/4 +#: src/include/network/lan/hardware.rb:134 msgid "" "<p>Additionally, specify <b>Options</b> for the kernel module. Use this\n" -"format: <i>option</i>=<i>value</i>. Each entry should be space-separated, " -"for example: <i>io=0x300 irq=5</i>. <b>Note:</b> If two cards are \n" -"configured with the same module name, the options will be merged while " -"saving.</p>\n" +"format: <i>option</i>=<i>value</i>. Each entry should be space-separated, for example: <i>io=0x300 irq=5</i>. <b>Note:</b> If two cards are \n" +"configured with the same module name, the options will be merged while saving.</p>\n" msgstr "" "<p>또한 커널 모듈에 대한 <b>옵션</b>을 지정하십시오.\n" -"<i>option</i>=<i>value</i> 형식을 사용합니다. 각 항목을 공백으로 구분해야 합" -"니다(예: <i>io=0x300 irq=5</i>). <b>참고:</b> 두 개의 카드가 \n" +"<i>option</i>=<i>value</i> 형식을 사용합니다. 각 항목을 공백으로 구분해야 합니다(예: <i>io=0x300 irq=5</i>). <b>참고:</b> 두 개의 카드가 \n" "동일한 모듈 이름으로 구성된 경우 저장하는 동안 옵션이 병합됩니다.</p>\n" -#: src/include/network/lan/hardware.rb:140 -msgid "" -"<p>If you specify options via <b>Ethtool options</b>, ifup will call ethtool " -"with these options.</p>\n" -msgstr "" -"<p><b>Ethtool 옵션</b>을 통해 옵션을 지정하는 경우 ifup에서 이러한 옵션으로 " -"ethtool을 호출합니다.</p>\n" +#: src/include/network/lan/hardware.rb:140 +msgid "<p>If you specify options via <b>Ethtool options</b>, ifup will call ethtool with these options.</p>\n" +msgstr "<p><b>Ethtool 옵션</b>을 통해 옵션을 지정하는 경우 ifup에서 이러한 옵션으로 ethtool을 호출합니다.</p>\n" -#. Manual dialog help 4/4 -#: src/include/network/lan/hardware.rb:149 +#. Manual dialog help 4/4 +#: src/include/network/lan/hardware.rb:149 msgid "" "<p>If you have a <b>PCMCIA</b> network card, select PCMCIA.\n" "If you have a <b>USB</b> network card, select USB.</p>\n" @@ -1899,9 +1851,9 @@ "<p><b>PCMCIA</b> 네트워크 카드가 있으면 PCMCIA를 선택하고,\n" "<b>USB</b> 네트워크 카드가 있으면 USB를 선택하십시오.</p>\n" -#. overwrite help -#. Manual dialog help 5/4 -#: src/include/network/lan/hardware.rb:158 +#. overwrite help +#. Manual dialog help 5/4 +#: src/include/network/lan/hardware.rb:158 msgid "" "<p>Here, set up your networking device. The values will be\n" "written to <i>/etc/modprobe.conf</i> or <i>/etc/chandev.conf</i>.</p>\n" @@ -1909,72 +1861,70 @@ "<p>여기서 네트워킹 장치를 설정합니다. 값은\n" "<i>/etc/modprobe.conf</i> 또는 <i>/etc/chandev.conf</i>에 기록됩니다.</p>\n" -#. Manual dialog help 6/4 -#: src/include/network/lan/hardware.rb:162 +#. Manual dialog help 6/4 +#: src/include/network/lan/hardware.rb:162 msgid "" "<p>Options for the module should be written in the format specified\n" "in the <b>IBM Device Drivers and Installation Commands</b> manual.</p>" -msgstr "" -"<p>모듈에 대한 옵션은 <b>IBM 디바이스 드라이버와 설치 명령 안내 형식으로 쓰" -"여 있습니다.</b></p>" +msgstr "<p>모듈에 대한 옵션은 <b>IBM 디바이스 드라이버와 설치 명령 안내 형식으로 쓰여 있습니다.</b></p>" -#. CheckBox label -#: src/include/network/lan/hardware.rb:290 +#. CheckBox label +#: src/include/network/lan/hardware.rb:290 msgid "&PCMCIA" msgstr "PCMCIA (&P)" -#. CheckBox label -#: src/include/network/lan/hardware.rb:299 +#. CheckBox label +#: src/include/network/lan/hardware.rb:299 msgid "&USB" msgstr "USB(&U)" -#. #116211 - allow user to change modules from list -#. Frame label -#: src/include/network/lan/hardware.rb:311 +#. #116211 - allow user to change modules from list +#. Frame label +#: src/include/network/lan/hardware.rb:311 msgid "&Kernel Module" msgstr "커널 모듈(&K)" -#. Text entry label -#: src/include/network/lan/hardware.rb:321 +#. Text entry label +#: src/include/network/lan/hardware.rb:321 msgid "&Module Name" msgstr "모듈 이름(&M)" -#: src/include/network/lan/hardware.rb:374 +#: src/include/network/lan/hardware.rb:374 msgid "Udev Rules" msgstr "Udev 규칙" -#: src/include/network/lan/hardware.rb:376 +#: src/include/network/lan/hardware.rb:376 msgid "Device Name" msgstr "장치 이름" -#: src/include/network/lan/hardware.rb:377 +#: src/include/network/lan/hardware.rb:377 msgid "Change" msgstr "변경" -#: src/include/network/lan/hardware.rb:388 +#: src/include/network/lan/hardware.rb:388 msgid "Show Visible Port Identification" msgstr "볼 수 있는 포트 ID 표시" -#. translators: how many seconds will card be blinking -#: src/include/network/lan/hardware.rb:393 +#. translators: how many seconds will card be blinking +#: src/include/network/lan/hardware.rb:393 msgid "Seconds" msgstr "초" -#: src/include/network/lan/hardware.rb:398 +#: src/include/network/lan/hardware.rb:398 msgid "Blink" msgstr "깜박임" -#: src/include/network/lan/hardware.rb:403 +#: src/include/network/lan/hardware.rb:403 msgid "Ethtool Options" msgstr "Ethtool 옵션" -#. Manual selection caption -#: src/include/network/lan/hardware.rb:481 +#. Manual selection caption +#: src/include/network/lan/hardware.rb:481 msgid "Manual Network Card Selection" msgstr "수동 네트워크 카드 선택" -#. Manual selection help -#: src/include/network/lan/hardware.rb:484 +#. Manual selection help +#: src/include/network/lan/hardware.rb:484 msgid "" "<p>Select the network card to configure. Search\n" "for a particular network card by entering the name in the search entry.</p>" @@ -1982,20 +1932,20 @@ "<p>네트워크 카드 설정을 하기 위해서 선택하십시오.\n" "특별한 네트워크 카드를 검색하기 위해서는 검색창에 이름을 입력하십시오.</p>" -#. Selection box label -#. Selection box title -#: src/include/network/lan/hardware.rb:494 -#: src/include/network/lan/hardware.rb:546 +#. Selection box label +#. Selection box title +#: src/include/network/lan/hardware.rb:494 +#: src/include/network/lan/hardware.rb:546 msgid "&Network Card" msgstr "네트워크 카드(&N)" -#. Text entry field -#: src/include/network/lan/hardware.rb:498 +#. Text entry field +#: src/include/network/lan/hardware.rb:498 msgid "&Search" msgstr "검색(&S)" -#. bnc#767946 -#: src/include/network/lan/hardware.rb:804 +#. bnc#767946 +#: src/include/network/lan/hardware.rb:804 msgid "" "Configuration name %s already exists.\n" "Choose a different one." @@ -2003,7 +1953,7 @@ "구성 이름 %s이(가) 이미 있습니다.\n" "다른 이름을 선택하십시오." -#: src/include/network/lan/hardware.rb:810 +#: src/include/network/lan/hardware.rb:810 msgid "" "Configuration name %s is invalid.\n" "Choose a different one." @@ -2011,156 +1961,140 @@ "구성 이름 %s이(가) 유효하지 않습니다.\n" "다른 이름을 선택하십시오." -#. S/390 dialog caption -#: src/include/network/lan/hardware.rb:866 +#. S/390 dialog caption +#: src/include/network/lan/hardware.rb:866 msgid "S/390 Network Card Configuration" msgstr "S/390 네트워크 카드 설정" -#. Frame label -#. Frame label -#. Frame label -#. Frame label -#: src/include/network/lan/hardware.rb:885 -#: src/include/network/lan/hardware.rb:987 -#: src/include/network/lan/hardware.rb:1054 -#: src/include/network/lan/hardware.rb:1091 +#. Frame label +#. Frame label +#. Frame label +#. Frame label +#: src/include/network/lan/hardware.rb:885 +#: src/include/network/lan/hardware.rb:987 +#: src/include/network/lan/hardware.rb:1054 +#: src/include/network/lan/hardware.rb:1091 msgid "S/390 Device Settings" msgstr "S/390 장치 설정" -#. TextEntry label -#: src/include/network/lan/hardware.rb:895 +#. TextEntry label +#: src/include/network/lan/hardware.rb:895 msgid "&Port Name" msgstr "포트 이름(&P)" -#: src/include/network/lan/hardware.rb:900 +#: src/include/network/lan/hardware.rb:900 msgid "Port Number" msgstr "포트 번호" -#. CheckBox label -#: src/include/network/lan/hardware.rb:914 +#. CheckBox label +#: src/include/network/lan/hardware.rb:914 msgid "&Enable IPA Takeover" msgstr "IPA 취득 활성화(&E)" -#. CheckBox label -#: src/include/network/lan/hardware.rb:921 +#. CheckBox label +#: src/include/network/lan/hardware.rb:921 msgid "Enable &Layer 2 Support" msgstr "계층 2 지원 활성화(&L)" -#. TextEntry label -#: src/include/network/lan/hardware.rb:928 +#. TextEntry label +#: src/include/network/lan/hardware.rb:928 msgid "Layer2 &MAC Address" msgstr "계층 2 MAC 주소(&M)" -#: src/include/network/lan/hardware.rb:936 -#: src/include/network/lan/hardware.rb:1012 -#: src/include/network/lan/hardware.rb:1066 +#: src/include/network/lan/hardware.rb:936 +#: src/include/network/lan/hardware.rb:1012 +#: src/include/network/lan/hardware.rb:1066 msgid "Read Channel" msgstr "읽기 채널" -#: src/include/network/lan/hardware.rb:942 -#: src/include/network/lan/hardware.rb:1018 -#: src/include/network/lan/hardware.rb:1072 +#: src/include/network/lan/hardware.rb:942 +#: src/include/network/lan/hardware.rb:1018 +#: src/include/network/lan/hardware.rb:1072 msgid "Write Channel" msgstr "쓰기 채널" -#: src/include/network/lan/hardware.rb:948 +#: src/include/network/lan/hardware.rb:948 msgid "Control Channel" msgstr "관리 채널" -#. S/390 dialog help: QETH Port name -#: src/include/network/lan/hardware.rb:959 +#. S/390 dialog help: QETH Port name +#: src/include/network/lan/hardware.rb:959 msgid "<p>Enter the <b>Port Name</b> for this interface (case-sensitive).</p>" -msgstr "" -"<p>이 인터페이스에 대한 <b>포트 이름</b>을 입력하십시오(대소문자 구분).</p>" +msgstr "<p>이 인터페이스에 대한 <b>포트 이름</b>을 입력하십시오(대소문자 구분).</p>" -#. S/390 dialog help: QETH Options -#: src/include/network/lan/hardware.rb:963 -msgid "" -"<p>Enter any additional <b>Options</b> for this interface (separated by " -"spaces).</p>" -msgstr "" -"<p>이 인터페이스에 대한 추가 <b>옵션</b>을 입력하십시오(공백으로 구분).</p>" +#. S/390 dialog help: QETH Options +#: src/include/network/lan/hardware.rb:963 +msgid "<p>Enter any additional <b>Options</b> for this interface (separated by spaces).</p>" +msgstr "<p>이 인터페이스에 대한 추가 <b>옵션</b>을 입력하십시오(공백으로 구분).</p>" -#: src/include/network/lan/hardware.rb:966 -msgid "" -"<p>Select <b>Enable IPA Takeover</b> if IP address takeover should be " -"enabled for this interface.</p>" -msgstr "" -"<p>이 인터페이스에 대해 IP 주소 취득을 활성화해야 하는 경우 <b>IPA 취득 활성" -"화</b>를 선택하십시오.</p>" +#: src/include/network/lan/hardware.rb:966 +msgid "<p>Select <b>Enable IPA Takeover</b> if IP address takeover should be enabled for this interface.</p>" +msgstr "<p>이 인터페이스에 대해 IP 주소 취득을 활성화해야 하는 경우 <b>IPA 취득 활성화</b>를 선택하십시오.</p>" -#: src/include/network/lan/hardware.rb:969 -msgid "" -"<p>Select <b>Enable Layer 2 Support</b> if this card has been configured " -"with layer 2 support.</p>" -msgstr "" -"<p>이 카드가 계층 2 지원 기능으로 구성된 경우 <b>계층 2 지원 활성화</b>를 선" -"택하십시오.</p>" +#: src/include/network/lan/hardware.rb:969 +msgid "<p>Select <b>Enable Layer 2 Support</b> if this card has been configured with layer 2 support.</p>" +msgstr "<p>이 카드가 계층 2 지원 기능으로 구성된 경우 <b>계층 2 지원 활성화</b>를 선택하십시오.</p>" -#: src/include/network/lan/hardware.rb:972 -msgid "" -"<p>Enter the <b>Layer 2 MAC Address</b> if this card has been configured " -"with layer 2 support.</p>" -msgstr "" -"<p>이 카드가 계층 2 지원 기능으로 구성된 경우 <b>계층 2 MAC 주소</b>를 입력하" -"십시오.</p>" +#: src/include/network/lan/hardware.rb:972 +msgid "<p>Enter the <b>Layer 2 MAC Address</b> if this card has been configured with layer 2 support.</p>" +msgstr "<p>이 카드가 계층 2 지원 기능으로 구성된 경우 <b>계층 2 MAC 주소</b>를 입력하십시오.</p>" -#. TextEntry label -#: src/include/network/lan/hardware.rb:996 +#. TextEntry label +#: src/include/network/lan/hardware.rb:996 msgid "&Port Number" msgstr "포트 번호(&P)" -#. TextEntry label -#: src/include/network/lan/hardware.rb:1004 +#. TextEntry label +#: src/include/network/lan/hardware.rb:1004 msgid "&LANCMD Time-Out" msgstr "LANCMD 시간 초과(&L)" -#. S/390 dialog help: LCS -#: src/include/network/lan/hardware.rb:1029 +#. S/390 dialog help: LCS +#: src/include/network/lan/hardware.rb:1029 msgid "<p>Choose the <b>Port Number</b> for this interface.</p>" msgstr "<p>이 인터페이스에 대한 <b>포트 번호</b>를 선택하십시오.</p>" -#: src/include/network/lan/hardware.rb:1030 +#: src/include/network/lan/hardware.rb:1030 msgid "<p>Specify the <b>LANCMD Time-Out</b> for this interface.</p>" msgstr "<p>이 인터페이스에 대한 <b>LANCMD 시간 초과</b>를 선택하십시오.</p>" -#. ComboBox item: CTC device protocol -#: src/include/network/lan/hardware.rb:1035 +#. ComboBox item: CTC device protocol +#: src/include/network/lan/hardware.rb:1035 msgid "Compatibility Mode" msgstr "호환성 모드" -#. ComboBox item: CTC device protocol -#: src/include/network/lan/hardware.rb:1037 +#. ComboBox item: CTC device protocol +#: src/include/network/lan/hardware.rb:1037 msgid "Extended Mode" msgstr "확장 모드" -#. ComboBox item: CTC device protocol -#: src/include/network/lan/hardware.rb:1039 +#. ComboBox item: CTC device protocol +#: src/include/network/lan/hardware.rb:1039 msgid "CTC-Based tty (Linux to Linux Connections)" msgstr "CTC 기반 tty(Linux 대 Linux 연결)" -#. ComboBox item: CTC device protocol -#: src/include/network/lan/hardware.rb:1041 +#. ComboBox item: CTC device protocol +#: src/include/network/lan/hardware.rb:1041 msgid "Compatibility Mode with OS/390 and z/OS" msgstr "OS/390 및 z/OS와의 호환성 모드" -#. TextEntry label -#: src/include/network/lan/hardware.rb:1060 +#. TextEntry label +#: src/include/network/lan/hardware.rb:1060 msgid "&Protocol" msgstr "프로토콜(&P)" -#. S/390 dialog help: CTC -#: src/include/network/lan/hardware.rb:1083 +#. S/390 dialog help: CTC +#: src/include/network/lan/hardware.rb:1083 msgid "<p>Choose the <b>Protocol</b> for this interface.</p>" msgstr "<p>이 인터페이스에 대한 <b>프로토콜</b>을 선택하십시오.</p>" -#. TextEntry label, #42789 -#: src/include/network/lan/hardware.rb:1100 +#. TextEntry label, #42789 +#: src/include/network/lan/hardware.rb:1100 msgid "&Peer Name" msgstr "피어 이름(&P)" -#. S/390 dialog help: IUCV, #42789 -#: src/include/network/lan/hardware.rb:1111 +#. S/390 dialog help: IUCV, #42789 +#: src/include/network/lan/hardware.rb:1111 msgid "" "<p>Enter the name of the IUCV peer,\n" "for example, the z/VM user name with which to connect (case-sensitive).</p>\n" @@ -2168,7 +2102,7 @@ "<p>IUCV 피어의 이름을 입력하십시오\n" "(예: 연결에 사용할 z/VM 사용자 이름)(대소문자 구분).</p>\n" -#: src/include/network/lan/hardware.rb:1224 +#: src/include/network/lan/hardware.rb:1224 msgid "" "An error occurred while creating device.\n" "See YaST log for details." @@ -2176,14 +2110,14 @@ "장치를 생성하는 중 오류가 발생했습니다.\n" "자세한 내용은 YaST 로그를 참조하십시오." -#. Manual network card configuration dialog -#. @return dialog result -#: src/include/network/lan/hardware.rb:1246 +#. Manual network card configuration dialog +#. @return dialog result +#: src/include/network/lan/hardware.rb:1246 msgid "Hardware Dialog" msgstr "하드웨어 대화 상자" -#. Network cards read dialog help 1/2 -#: src/include/network/lan/help.rb:31 +#. Network cards read dialog help 1/2 +#: src/include/network/lan/help.rb:31 msgid "" "<p><b><big>Initializing Network Card\n" "Configuration</big></b><br>Please wait...<br></p>\n" @@ -2191,8 +2125,8 @@ "<p><b><big>네트워크 카드 구성 초기화\n" "중</big></b><br>잠시 기다려 주십시오...<br></p>\n" -#. Network cards read dialog help 2/2 -#: src/include/network/lan/help.rb:35 +#. Network cards read dialog help 2/2 +#: src/include/network/lan/help.rb:35 msgid "" "<p><b><big>Aborting the Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <B>Abort</B> now.</p>\n" @@ -2200,8 +2134,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <B>중단</B>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Network cards write dialog help 1/2 -#: src/include/network/lan/help.rb:39 +#. Network cards write dialog help 1/2 +#: src/include/network/lan/help.rb:39 msgid "" "<p><b><big>Saving Network Card\n" "Configuration</big></b><br>Please wait...<br></p>\n" @@ -2209,8 +2143,8 @@ "<p><b><big>네트워크 카드 구성 저장\n" "중</big></b><br>잠시 기다려 주십시오...<br></p>\n" -#. Network cards write dialog help 2/2 -#: src/include/network/lan/help.rb:43 +#. Network cards write dialog help 2/2 +#: src/include/network/lan/help.rb:43 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort saving by pressing <b>Abort</b>.</p>\n" @@ -2218,9 +2152,9 @@ "<p><b><big>저장 중단:</big></b><br>\n" "<b>중단</b>을 누르면 저장이 중단됩니다.</p>\n" -#. Network setup method help -#. NetworkManager and wicked are programs -#: src/include/network/lan/help.rb:48 +#. Network setup method help +#. NetworkManager and wicked are programs +#: src/include/network/lan/help.rb:48 msgid "" "<p><b><big>Network Setup Method</big></b></p>\n" "<p>Use the <b>NetworkManager</b> as a desktop applet\n" @@ -2232,7 +2166,7 @@ "데스크톱 애플릿으로 <b>NetworkManager</b>를 사용합니다. 유무선 네트워크 간\n" "전환에 적합합니다.</p>\n" -#: src/include/network/lan/help.rb:54 +#: src/include/network/lan/help.rb:54 msgid "" "<p>Use <b>wicked</b> if you do not run a desktop environment\n" "or need to use multiple interfaces at the same time.</p>\n" @@ -2240,8 +2174,8 @@ "<p>데스크톱 환경을 실행하지 않거나 동시에 여러 인터페이스를\n" "사용해야 하는 경우 <b>wicked</b>를 사용하십시오.</p>\n" -#. For systems not including NetworkManager by default (bnc#892678) -#: src/include/network/lan/help.rb:59 +#. For systems not including NetworkManager by default (bnc#892678) +#: src/include/network/lan/help.rb:59 msgid "" "<p><b>NetworkManager</b> is not part of every base\n" "installation repository. For example, to enable it on SUSE\n" @@ -2250,11 +2184,10 @@ msgstr "" "<p><b>NetworkManager</b>는 모든 기본\n" "설치 리포지토리의 일부가 아닙니다. 예를 들어 SUSE\n" -"Linux Enterprise Server에서 NetworkManager를 활성화하려면 Workstation " -"Extension\n" +"Linux Enterprise Server에서 NetworkManager를 활성화하려면 Workstation Extension\n" "리포지토리를 추가하고 'NetworkManager' 패키지를 설치해야 합니다.</p>\n" -#: src/include/network/lan/help.rb:66 +#: src/include/network/lan/help.rb:66 msgid "" "<p><b><big>Network Card Overview</big></b><br>\n" "Obtain an overview of installed network cards. Additionally,\n" @@ -2264,7 +2197,7 @@ "설치된 네트워크 카드의 개요를 볼 수 있습니다. 또한\n" " 구성을 편집할 수도 있습니다.<br></p>\n" -#: src/include/network/lan/help.rb:71 +#: src/include/network/lan/help.rb:71 msgid "" "<p><b><big>Adding a Network Card:</big></b><br>\n" "Press <b>Add</b> to configure a new network card manually.</p>\n" @@ -2272,7 +2205,7 @@ "<p><b><big>네트워크 카드 추가:</big></b><br>\n" "수동으로 새 네트워크 카드를 구성하려면 <b>추가</b>를 누르십시오.</p>\n" -#: src/include/network/lan/help.rb:74 +#: src/include/network/lan/help.rb:74 msgid "" "<p><b><big>Configuring or Deleting:</big></b><br>\n" "Choose a network card to change or remove.\n" @@ -2282,31 +2215,29 @@ "변경하거나 제거할 네트워크 카드를 선택합니다.\n" "그런 다음 각각 <b>편집</b> 또는 <b>삭제</b>를 누르십시오.</p>\n" -#. IPv6 help -#: src/include/network/lan/help.rb:81 +#. IPv6 help +#: src/include/network/lan/help.rb:81 msgid "" "<p><b><big>IPv6 Protocol Settings</big></b></p>\n" "<p>Check <b>Enable IPv6</b> to enable the ipv6 module in the kernel.\n" "It is possible to use IPv6 together with IPv4. This is the default option.\n" "To disable IPv6, uncheck this option. This will blacklist the kernel \n" -"module for ipv6. If the IPv6 protocol is not used on your network, the " -"response \n" +"module for ipv6. If the IPv6 protocol is not used on your network, the response \n" "time can be faster.</p>\n" msgstr "" "<p><b><big>IPv6 프로토콜 설정</big></b></p>\n" "<p><b>IPv6 활성화</b>를 선택하여 커널에서 ipv6 모듈을 활성화합니다.\n" "IPv6을 IPv4와 함께 사용할 수 있습니다. 기본 옵션입니다.\n" "IPv6을 비활성화하려면 이 옵션을 선택 취소하십시오. ipv6에 대한 커널 모듈이\n" -"블랙리스트로 지정됩니다. 네트워크에서 IPv6 프로토콜이 사용되지 않는 경우 응" -"답 \n" +"블랙리스트로 지정됩니다. 네트워크에서 IPv6 프로토콜이 사용되지 않는 경우 응답 \n" "시간이 더 빠를 수 있습니다.</p>\n" -#: src/include/network/lan/help.rb:89 +#: src/include/network/lan/help.rb:89 msgid "<p>All changes will be applied after reboot.</p>" msgstr "<p>모든 변경 내용은 재부팅 후에 적용됩니다.</p>" -#. Routing dialog help 1/2 -#: src/include/network/lan/help.rb:92 +#. Routing dialog help 1/2 +#: src/include/network/lan/help.rb:92 msgid "" "<p>The routing can be set up in this dialog.\n" "The <b>Default Gateway</b> matches every possible destination, but poorly. \n" @@ -2315,28 +2246,23 @@ "to enable you to say \"and everything else should go here.\"</p>\n" msgstr "" "<p>이 대화 상자에서는 라우팅을 설정할 수 있습니다.\n" -"<b>기본 게이트웨이</b>는 모든 가능한 대상과 일치하지만 정확하지는 않습니" -"다. \n" +"<b>기본 게이트웨이</b>는 모든 가능한 대상과 일치하지만 정확하지는 않습니다. \n" " 필요한 주소와 일치하는 다른 항목이 존재할 경우 기본 라우팅\n" -" 대신 그 항목이 사용됩니다. 기본 라우팅은 \"여기에 다른 값을 입력하십시오\"라" -"는\n" +" 대신 그 항목이 사용됩니다. 기본 라우팅은 \"여기에 다른 값을 입력하십시오\"라는\n" " 정도의 개념이라고 할 수 있습니다.</p>\n" -#: src/include/network/lan/help.rb:99 +#: src/include/network/lan/help.rb:99 msgid "" "<p>For each route, enter destination network IP address, gateway address,\n" "and netmask. To omit any of these values, use a dash sign \"-\". Select\n" -"the device through which the traffic to the defined network will be routed." -"\"-\" is an alias for any interface.</p>\n" +"the device through which the traffic to the defined network will be routed.\"-\" is an alias for any interface.</p>\n" msgstr "" "<p>각 경로에 대해 대상 네트워크 IP 주소, 게이트웨이 주소\n" -"및 넷마스크를 입력하십시오. 이러한 값을 생략하려면 대시 기호 \"-\"를 사용하십" -"시오. 정의된 네트워크로의\n" -"트래픽이 라우팅되는 장치를 선택하십시오. \"-\"는 모든 인터페이스의 별칭입니" -"다.</p>\n" +"및 넷마스크를 입력하십시오. 이러한 값을 생략하려면 대시 기호 \"-\"를 사용하십시오. 정의된 네트워크로의\n" +"트래픽이 라우팅되는 장치를 선택하십시오. \"-\"는 모든 인터페이스의 별칭입니다.</p>\n" -#. Routing dialog help 2/2 -#: src/include/network/lan/help.rb:105 +#. Routing dialog help 2/2 +#: src/include/network/lan/help.rb:105 msgid "" "<p>Enable <b>IPv4 Forwarding</b> (forwarding packets from external networks\n" "to the internal one) if this system is a router.\n" @@ -2344,7 +2270,7 @@ "<p>시스템이 라우터인 경우 <b>IPv4 전달</b>(외부 네트워크에서\n" "내부 네트워크로 패킷 전달)을 활성화하십시오.\n" -#: src/include/network/lan/help.rb:109 +#: src/include/network/lan/help.rb:109 msgid "" "<p>Enable <b>IPv6 Forwarding</b> (forwarding packets from external networks\n" "to the internal one) if this system is a router.\n" @@ -2356,63 +2282,48 @@ "<b>경고:</b> IPv6 전달은 IPv6 SLAAC(상태 비저장 주소\n" "자동 구성)를 비활성화합니다." -#: src/include/network/lan/help.rb:115 +#: src/include/network/lan/help.rb:115 msgid "" -"<p><b>Important:</b> if the firewall is enabled, allowing forwarding alone " -"is not enough. \n" +"<p><b>Important:</b> if the firewall is enabled, allowing forwarding alone is not enough. \n" "You should enable masquerading and/or set at least one redirect rule in the\n" "firewall configuration. Use the YaST firewall module.</p>\n" msgstr "" -"<p><b>중요:</b> 방화벽이 활성화된 경우 전달을 허용하는 것만으로 충분하지 않습" -"니다. \n" +"<p><b>중요:</b> 방화벽이 활성화된 경우 전달을 허용하는 것만으로 충분하지 않습니다. \n" "방화벽 구성에서 마스커레이딩을 활성화하고 리디렉션 규칙을\n" "하나 이상 설정해야 합니다. YaST 방화벽 모듈을 사용하십시오.</p>\n" -#: src/include/network/lan/help.rb:121 +#: src/include/network/lan/help.rb:121 msgid "" "<p>If you are using DHCP to get an IP address, check whether you get\n" -"also a hostname via DHCP. The hostname will be set automatically by the DHCP " -"client.\n" -"However, changing the hostname at runtime may confuse the graphical " -"desktop. \n" -"Therefore, set this option to \"no\" if you connect to different networks " -"that assign \n" -"different hostnames. Otherwise you can specify a particular interface to use " -"or use a generic \"any\" \n" -"option. However this option can lead to strange behavior if you have a " -"multihomed system \n" +"also a hostname via DHCP. The hostname will be set automatically by the DHCP client.\n" +"However, changing the hostname at runtime may confuse the graphical desktop. \n" +"Therefore, set this option to \"no\" if you connect to different networks that assign \n" +"different hostnames. Otherwise you can specify a particular interface to use or use a generic \"any\" \n" +"option. However this option can lead to strange behavior if you have a multihomed system \n" "connected to more DHCP networks.</p>\n" msgstr "" "<p>IP 주소를 가져오기 위해 DHCP를 사용하는 경우\n" -"호스트 이름도 DHCP를 통해 가져오는지 여부를 확인합니다. 호스트 이름은 DHCP 클" -"라이언트에서 자동으로 설정됩니다.\n" -"그러나 런타임 시 호스트 이름을 변경하면 그래픽 데스크톱에 혼동을 줄 수 있습니" -"다. \n" +"호스트 이름도 DHCP를 통해 가져오는지 여부를 확인합니다. 호스트 이름은 DHCP 클라이언트에서 자동으로 설정됩니다.\n" +"그러나 런타임 시 호스트 이름을 변경하면 그래픽 데스크톱에 혼동을 줄 수 있습니다. \n" "따라서 다른 호스트 이름을 할당하는 네트워크에 \n" -"연결하는 경우 이 옵션을 \"아니요\"로 설정합니다. 아니면 사용할 특정 인터페이" -"스를 지정하거나 일반 \"임의\" 옵션을 사용할 수 있습니다. 그러나 이 옵션은 더 " -"많은 DHCP 네트워크에 연결 멀티호밍 시스템을 사용하는 경우 \n" +"연결하는 경우 이 옵션을 \"아니요\"로 설정합니다. 아니면 사용할 특정 인터페이스를 지정하거나 일반 \"임의\" 옵션을 사용할 수 있습니다. 그러나 이 옵션은 더 많은 DHCP 네트워크에 연결 멀티호밍 시스템을 사용하는 경우 \n" "비정상적인 작동을 유발할 수 있습니다.</p>\n" -#: src/include/network/lan/help.rb:131 +#: src/include/network/lan/help.rb:131 msgid "" "<p><b>Assign Hostname to Loopback IP</b> associates your hostname with \n" -"the IP address <tt>127.0.0.2</tt> (loopback) in <tt>/etc/hosts</tt>. This is " -"a \n" -"useful option if you want to have the hostname resolvable at all times, " -"even \n" -"without an active network. In all other cases, use it carefully, " -"especially \n" +"the IP address <tt>127.0.0.2</tt> (loopback) in <tt>/etc/hosts</tt>. This is a \n" +"useful option if you want to have the hostname resolvable at all times, even \n" +"without an active network. In all other cases, use it carefully, especially \n" "if this computer provides some network services.</p>\n" msgstr "" "<p><b>루프백 IP에 호스트 이름 할당</b>은 호스트 이름을 \n" "<tt>/etc/hosts</tt>의 IP 주소 <tt>127.0.0.2</tt>(루프백)에 연결합니다. \n" "활성 네트워크가 없어도 호스트 이름을 항상 확인할 수 있게 하려는 경우에 \n" -"유용한 옵션입니다. 다른 모든 경우, 특히 이 컴퓨터에서 네트워크 서비스를 제공" -"하는 경우에는 \n" +"유용한 옵션입니다. 다른 모든 경우, 특히 이 컴퓨터에서 네트워크 서비스를 제공하는 경우에는 \n" "주의해서 사용하십시오.</p>\n" -#: src/include/network/lan/help.rb:139 +#: src/include/network/lan/help.rb:139 msgid "" "<p>Enter the name servers and domain search list for resolving \n" "hostnames. Usually they can be obtained by DHCP.</p>\n" @@ -2420,8 +2331,8 @@ "<p>호스트 이름을 확인할 수 있도록 이름 서버 및 도메인 검색 목록을\n" "입력하십시오. 이러한 정보는 DHCP를 통해 얻을 수 있습니다.</p>\n" -#. resolver dialog help -#: src/include/network/lan/help.rb:143 +#. resolver dialog help +#: src/include/network/lan/help.rb:143 msgid "" "<p>A name server is a computer that translates hostnames into\n" "IP addresses. This value must be entered as an <b>IP address</b>\n" @@ -2431,13 +2342,12 @@ "말합니다. 이 값은 호스트 이름이 아니라 <b>IP 주소</b>(예:\n" " 192.168.0.42)로 입력해야 합니다.</p>\n" -#. resolver dialog help -#: src/include/network/lan/help.rb:149 +#. resolver dialog help +#: src/include/network/lan/help.rb:149 msgid "" "<p>Search domain is the domain name where hostname searching starts.\n" "The primary search domain is usually the same as the domain name of\n" -"your computer (for example, suse.de). There may be additional search " -"domains\n" +"your computer (for example, suse.de). There may be additional search domains\n" "(such as suse.com). Separate the domains with commas or white space.</p>\n" msgstr "" "<p>검색 도메인이란 호스트 이름 검색이 시작되는 도메인 이름을 말합니다.\n" @@ -2445,41 +2355,34 @@ " 같습니다(예: suse.de). 추가 검색 도메인이 있을 수도 있습니다\n" " (예: suse.com). 쉼표 또는 공백으로 도메인을 구분하십시오.</p>\n" -#: src/include/network/lan/help.rb:156 +#: src/include/network/lan/help.rb:156 msgid "" -"<p>Enter the short name for this computer (e.g. <i>mymachine</i>) and the " -"DNS domain\n" -"(e.g. <i>example.com</i>) that it belongs to. The domain is especially " -"important if this \n" -"computer is a mail server. You can view the hostname of you computer using " -"the <i>hostname</i> \n" +"<p>Enter the short name for this computer (e.g. <i>mymachine</i>) and the DNS domain\n" +"(e.g. <i>example.com</i>) that it belongs to. The domain is especially important if this \n" +"computer is a mail server. You can view the hostname of you computer using the <i>hostname</i> \n" "command.</p>" msgstr "" -"<p>이 컴퓨터의 약어(예: <i>mymachine</i>)와 이에 속하는 DNS 도메인(예: " -"<i>example.com</i>)을 입력합니다. 도메인은 이 컴퓨터가 \n" +"<p>이 컴퓨터의 약어(예: <i>mymachine</i>)와 이에 속하는 DNS 도메인(예: <i>example.com</i>)을 입력합니다. 도메인은 이 컴퓨터가 \n" "메일 서버일 경우 특히 중요합니다. 컴퓨터의 호스트 이름은 <i>hostname</i> \n" "명령을 사용하여 볼 수 있습니다.</p>" -#: src/include/network/lan/help.rb:163 +#: src/include/network/lan/help.rb:163 msgid "" "<p>Select the way how the DNS configuration will be modified (name servers,\n" -"search list, the content of <i>/etc/resolv.conf</i>). Normally, it is " -"handled\n" +"search list, the content of <i>/etc/resolv.conf</i>). Normally, it is handled\n" "by the <i>netconfig</i> script, which merges statically defined data with\n" "dynamically obtained data (e.g. from the DHCP client, NetworkManager,\n" -"etc.). This is the default. <b>Use Default Policy</b> is sufficient for " -"most\n" +"etc.). This is the default. <b>Use Default Policy</b> is sufficient for most\n" "configurations.</p>\n" msgstr "" "<p>DNS 구성이 수정되는 방법(이름 서버,\n" "검색 목록, <i>/etc/resolv.conf</i>의 컨텐트)을 선택하십시오. 일반적으로\n" "고정적으로 정의된 데이터를\n" "동적으로 얻은 데이터(예: DHCP 클라이언트, NetworkManager 등)와\n" -"병합하는 <i>netconfig</i> 스크립트에 의해 처리됩니다. 기본값입니다. <b>기본 " -"정책 사용</b>은 대부분의 구성에\n" +"병합하는 <i>netconfig</i> 스크립트에 의해 처리됩니다. 기본값입니다. <b>기본 정책 사용</b>은 대부분의 구성에\n" "충분합니다.</p>\n" -#: src/include/network/lan/help.rb:171 +#: src/include/network/lan/help.rb:171 msgid "" "<p>By choosing <b>Only Manually</b>, <i>netconfig</i> will no longer be\n" "allowed to modify <i>/etc/resolv.conf</i>. You can however edit the file\n" @@ -2492,38 +2395,31 @@ msgstr "" "<p><b>수동으로만</b>을 선택하면 <i>netconfig</i>에서 더 이상\n" "<i>/etc/resolv.conf</i>를 수정할 수 없습니다. 그러나 수동으로 파일을\n" -"편집할 수 있습니다. <b>사용자 정의 정책 사용</b>을 선택하면 인터페이스 이름" -"의\n" +"편집할 수 있습니다. <b>사용자 정의 정책 사용</b>을 선택하면 인터페이스 이름의\n" "쉼표로 구분된 목록으로 구성된 사용자 정의 정책 문자열을 지정할 수 있습니다.\n" "여기에는 STATIC 및 STATIC_FALLBACK이 미리 정의된 특수 값인 와일드카드가\n" -"포함됩니다. 자세한 내용은 <i>netconfig</i> 매뉴얼 페이지를 참조하십시오. 참" -"고:\n" +"포함됩니다. 자세한 내용은 <i>netconfig</i> 매뉴얼 페이지를 참조하십시오. 참고:\n" "필드를 비워 두면 <b>수동으로만</b> 정책을\n" "사용하는 것과 같습니다.</p>\n" -#. Address dialog help 1-6/8: dynamic address preferred -#. Address dialog help 1/8 -#: src/include/network/lan/help.rb:183 +#. Address dialog help 1-6/8: dynamic address preferred +#. Address dialog help 1/8 +#: src/include/network/lan/help.rb:183 msgid "" "<p><b><big>Address Setup</big></b></p>\n" -"<p>Select <b>No Address Setup</b> if you do not want to assign an IP address " -"to this device.\n" +"<p>Select <b>No Address Setup</b> if you do not want to assign an IP address to this device.\n" "This is particularly useful for bonding ethernet devices.</p>\n" msgstr "" "<p><b><big>주소 설정</big></b></p>\n" -"<p>이 장치에 IP 주소를 할당하지 않으려면 <b>주소 설정 없음</b>을 선택합니" -"다.\n" +"<p>이 장치에 IP 주소를 할당하지 않으려면 <b>주소 설정 없음</b>을 선택합니다.\n" "결합 이더넷 장치에 특히 유용합니다.</p>\n" -#: src/include/network/lan/help.rb:188 -msgid "" -"<p>Check <b>iBFT</b> if you want to keep the network configured in your BIOS." -"</p>\n" -msgstr "" -"<p>BIOS에서 구성된 네트워크를 유지하려면 <b>iBFT</b>를 선택하십시오.</p>\n" +#: src/include/network/lan/help.rb:188 +msgid "<p>Check <b>iBFT</b> if you want to keep the network configured in your BIOS.</p>\n" +msgstr "<p>BIOS에서 구성된 네트워크를 유지하려면 <b>iBFT</b>를 선택하십시오.</p>\n" -#. Address dialog help 2/8 -#: src/include/network/lan/help.rb:192 +#. Address dialog help 2/8 +#: src/include/network/lan/help.rb:192 msgid "" "<p>Select <b>Dynamic Address</b> if you do not have a static IP address \n" "assigned by the system administrator or your Internet provider.</p>\n" @@ -2531,38 +2427,32 @@ "<p>시스템 관리자나 인터넷 공급자로부터 고정 IP 주소를 받지 않은 경우\n" "<b>동적 주소</b>를 선택하십시오.</p>\n" -#. Address dialog help 3/8 -#: src/include/network/lan/help.rb:196 +#. Address dialog help 3/8 +#: src/include/network/lan/help.rb:196 msgid "" "<p>Choose one of the dynamic address assignment methods. Select <b>DHCP</b>\n" "if you have a DHCP server running on your local network. Network addresses \n" "are then automatically obtained from the server.</p>\n" msgstr "" -"<p>동적 주소 할당 방법 중 하나를 선택하십시오. DHCP 서버가 로컬 네트워크에" -"서\n" +"<p>동적 주소 할당 방법 중 하나를 선택하십시오. DHCP 서버가 로컬 네트워크에서\n" "실행 중인 경우 <b>DHCP</b>를 선택하십시오. 그러면 서버에서 \n" "네트워크 주소를 자동으로 가져옵니다.</p>\n" -#. Address dialog help 4/8 -#: src/include/network/lan/help.rb:202 +#. Address dialog help 4/8 +#: src/include/network/lan/help.rb:202 msgid "" "<p>To search for an IP address and assign it statically, select \n" -"<b>Zeroconf</b>. To use DHCP and fall back to zeroconf, select <b>DHCP + " -"Zeroconf\n" -"</b>. Otherwise, the network addresses must be assigned <b>Statically</b>.\n" +"<b>Zeroconf</b>. To use DHCP and fall back to zeroconf, select <b>DHCP + Zeroconf\n" +"</b>. Otherwise, the network addresses must be assigned <b>Statically</b>.</p>\n" msgstr "" "<p>IP 주소를 검색하고 정적으로 할당하려면\n" -"<b>Zeroconf</b>를 선택합니다. DHCP를 사용하여 zeroconf로 변경하려면 <b>DHCP " -"+ Zeroconf</b>를\n" -"선택합니다. 그렇지 않으면 네트워크 주소는 <b>정적</b>으로 할당해야 합니다.\n" +"<b>Zeroconf</b>를 선택합니다. DHCP를 사용하여 zeroconf로 변경하려면 <b>DHCP + Zeroconf</b>를\n" +"선택합니다. 그렇지 않으면 네트워크 주소는 <b>정적</b>으로 할당해야 합니다.</p>\n" -#. Address dialog help 5/8 -#: src/include/network/lan/help.rb:209 +#. Address dialog help 5/8 +#: src/include/network/lan/help.rb:209 msgid "" -"<p>Enter the <b>IP Address</b> (for example: <tt>192.168.100.99</tt>) for " -"your computer, and the \n" +"<p>Enter the <b>IP Address</b> (for example: <tt>192.168.100.99</tt>) for your computer, and the \n" " <b>Remote IP Address</b> (for example: <tt>192.168.100.254</tt>)\n" "for your peer.</p>\n" msgstr "" @@ -2570,34 +2460,27 @@ "상대방의 <b>원격 IP 주소</b>(예: <tt>192.168.100.254</tt>)를 입력하십시오.\n" "</p>\n" -#. Address dialog help 6/8 -#: src/include/network/lan/help.rb:216 +#. Address dialog help 6/8 +#: src/include/network/lan/help.rb:216 msgid "" -"<p>For <b>Static Address Setup</b> enter the static IP address for your " -"computer (for example: <tt>192.168.100.99</tt>) and\n" -"the network mask (usually <tt>255.255.255.0</tt> or just length of prefix " -"<tt>/24</tt>).Optionally, you can enter\n" -"a fully qualified hostname for this IP address. The hostname will be written " -"to <tt>/etc/hosts</tt>.</p>\n" +"<p>For <b>Static Address Setup</b> enter the static IP address for your computer (for example: <tt>192.168.100.99</tt>) and\n" +"the network mask (usually <tt>255.255.255.0</tt> or just length of prefix <tt>/24</tt>).Optionally, you can enter\n" +"a fully qualified hostname for this IP address. The hostname will be written to <tt>/etc/hosts</tt>.</p>\n" msgstr "" -"<p><b>고정 주소 설정</b>의 경우 컴퓨터의 고정 IP 주소(예: " -"<tt>192.168.100.99</tt>) 및\n" -"네트워크 마스크(일반적으로 <tt>255.255.255.0</tt> 또는 접두어 길이 <tt>/24만)를 입력하십시오. 선택적으로\n" -"이 IP 주소에 대한 정규화된 호스트 이름을 입력할 수 있습니다. 호스트 이름이 " -"<tt>/etc/hosts</tt>에 기록됩니다.</p>\n" +"<p><b>고정 주소 설정</b>의 경우 컴퓨터의 고정 IP 주소(예: <tt>192.168.100.99</tt>) 및\n" +"네트워크 마스크(일반적으로 <tt>255.255.255.0</tt> 또는 접두어 길이 <tt>/24</tt>만)를 입력하십시오. 선택적으로\n" +"이 IP 주소에 대한 정규화된 호스트 이름을 입력할 수 있습니다. 호스트 이름이 <tt>/etc/hosts</tt>에 기록됩니다.</p>\n" -#. Address dialog help 8/8 -#: src/include/network/lan/help.rb:222 +#. Address dialog help 8/8 +#: src/include/network/lan/help.rb:222 msgid "" "<p>Contact your <b>network administrator</b> for more information about\n" "the network configuration.</p>" msgstr "" -"<p>네트워크 설정에 대해서 자세히 알기 원하면 여러분의 <b>네트워크 관리자\n" +"<p>네트워크 설정에 대해서 자세히 알기 원하면 여러분의 <b>네트워크 관리자</b>\n" "에게 연락하십시오.</p>" -#: src/include/network/lan/help.rb:226 +#: src/include/network/lan/help.rb:226 msgid "" "<p>DHCP configuration is not recommended for this product.\n" "Components of this product might not work with DHCP.</p>" @@ -2605,7 +2488,7 @@ "<p>이 제품에 대해서는 DHCP 구성을 하지 않는 것이 좋습니다.\n" "이 제품의 구성 요소가 DHCP와 작동하지 않을 수도 있습니다.</p>" -#: src/include/network/lan/help.rb:230 +#: src/include/network/lan/help.rb:230 msgid "" "<p><b><big>Firewall Zone</big></b></p>\n" "<p>Select the firewall zone to put the interface into. If you\n" @@ -2623,95 +2506,77 @@ "차단됩니다. 영역을 선택하지 않고 다른 인터페이스는 없는 경우 \n" "방화벽이 비활성화됩니다.</p>" -#: src/include/network/lan/help.rb:240 -msgid "" -"<p><b>Mandatory Interface</b> specifies whether the network service reports " -"failure if the interface fails to start at boot time.</p>" -msgstr "" -"<p><b>필수 인터페이스</b>는 부팅 시 인터페이스를 시작하지 못할 경우 네트워크 " -"서비스에서 실패를 보고할지 여부를 지정합니다.</p>" +#: src/include/network/lan/help.rb:240 +msgid "<p><b>Mandatory Interface</b> specifies whether the network service reports failure if the interface fails to start at boot time.</p>" +msgstr "<p><b>필수 인터페이스</b>는 부팅 시 인터페이스를 시작하지 못할 경우 네트워크 서비스에서 실패를 보고할지 여부를 지정합니다.</p>" -#: src/include/network/lan/help.rb:244 +#: src/include/network/lan/help.rb:244 msgid "" "<p><b><big>Maximum Transfer Unit</big></b></p>\n" "<p>Maximum transfer unit (<b>MTU</b>) is the maximum size of the packet,\n" "transferred over the network in one frame. Usually, you do not need to\n" "set a MTU, but using lower MTU values may improve the network performance,\n" -"especially on slow dial-up connections. Either select one of the " -"recommended\n" +"especially on slow dial-up connections. Either select one of the recommended\n" "values or define another one.</p>\n" msgstr "" "<p><b><big>최대 전송 단위</big></b></p>\n" "<p>최대 전송 단위(<b>MTU</b>)는 한 프레임에서 네트워크를 통해 전송되는\n" "패킷의 최대 크기입니다. 일반적으로\n" -"MTU를 설정할 필요는 없지만 낮은 MTU 값을 사용하면 특히 느린 전화 접속 연결에" -"서\n" +"MTU를 설정할 필요는 없지만 낮은 MTU 값을 사용하면 특히 느린 전화 접속 연결에서\n" "네트워크 성능을 향상시킬 수 있습니다. 권장 값 중 하나를\n" "선택하거나 다른 값을 정의하십시오.</p>\n" -#: src/include/network/lan/help.rb:253 +#: src/include/network/lan/help.rb:253 msgid "" "<p>Select the slave devices for the bond device.\n" -"Only devices with the device activation set to <b>Never</b> and with <b>No " -"Address Setup</b> are available.</p>" +"Only devices with the device activation set to <b>Never</b> and with <b>No Address Setup</b> are available.</p>" msgstr "" "<p>결합 장치용 슬레이브 장치를 선택하십시오.\n" -"장치 활성화가 <b>하지 않음</b>이고 <b>주소 설정 없음</b>으로 설정된 장치만 사" -"용 가능합니다.</p>" +"장치 활성화가 <b>하지 않음</b>이고 <b>주소 설정 없음</b>으로 설정된 장치만 사용 가능합니다.</p>" -#. DHCP dialog help 1/7 -#: src/include/network/lan/help.rb:257 +#. DHCP dialog help 1/7 +#: src/include/network/lan/help.rb:257 msgid "<p><b><big>DHCP Client Options</big></b></p>" msgstr "<p><b><big>DHCP 클라이언트 옵션</big></b><br>" -#. DHCP dialog help 2/7 -#: src/include/network/lan/help.rb:259 +#. DHCP dialog help 2/7 +#: src/include/network/lan/help.rb:259 msgid "" "<p>The <b>DHCP Client Identifier</b>, if left empty, defaults to\n" -"the hardware address of the network interface. It must be different for " -"each\n" +"the hardware address of the network interface. It must be different for each\n" "DHCP client on a single network. Therefore, specify a unique free-form\n" "identifier here if you have several (virtual) machines using the same\n" "network interface and thus the same hardware address.</p>" msgstr "" "<p><b>DHCP 클라이언트 식별자</b>, 만약에 텅비어 있다면,\n" -"네트워크 인터페이스의 하드웨어 주소는 디폴트 입니다. 싱글 네트워크상의 각각" -"의\n" -"DHCP 클라이언트를 위해서 다른 주소 값을 가지고 있습니다. 따라서, 만약 여러분" -"이\n" -"같은 네크워크 인터페이스와 같은 하드웨어 주소를 사용하는 여러개의 버츄얼 머신" -"을\n" +"네트워크 인터페이스의 하드웨어 주소는 디폴트 입니다. 싱글 네트워크상의 각각의\n" +"DHCP 클라이언트를 위해서 다른 주소 값을 가지고 있습니다. 따라서, 만약 여러분이\n" +"같은 네크워크 인터페이스와 같은 하드웨어 주소를 사용하는 여러개의 버츄얼 머신을\n" "가지고 있다면 여기에 유일한 자유형식 식별자로 명시해야 합니다.</p>" -#. DHCP dialog help 3/7 -#: src/include/network/lan/help.rb:267 +#. DHCP dialog help 3/7 +#: src/include/network/lan/help.rb:267 msgid "" "<p>The <b>Hostname to Send</b> specifies a string used for the\n" -"hostname option field when the DHCP client sends messages to the DHCP " -"server. Some \n" +"hostname option field when the DHCP client sends messages to the DHCP server. Some \n" "DHCP servers update name server zones (forward and reverse records) \n" "according to this hostname (dynamic DNS).</p>\n" "Some DHCP servers require the <b>Hostname to Send</b> option field to\n" -"contain a specific string in the DHCP messages from clients. Leave <b>AUTO\n" -"to send the current hostname (for example, the one defined in <tt>/etc/" -"HOSTNAME</tt>). \n" +"contain a specific string in the DHCP messages from clients. Leave <b>AUTO</b>\n" +"to send the current hostname (for example, the one defined in <tt>/etc/HOSTNAME</tt>). \n" "If you do not want to send a hostname, leave the field empty.</p>\n" msgstr "" -"<p><b>전송할 호스트 이름</b>은 DHCP 클라이언트가 DHCP 서버로 메시지를 보낼 " -"때\n" +"<p><b>전송할 호스트 이름</b>은 DHCP 클라이언트가 DHCP 서버로 메시지를 보낼 때\n" "호스트 이름 옵션 필드에 사용되는 스트링을 지정합니다. 일부 \n" "DHCP 서버는 이 호스트 이름(동적 DNS)에 따라 이름 서버 영역(정방향 및 \n" "역방향 레코드)을 업데이트합니다.</p>\n" "일부 DHCP 서버는 <b>전송할 호스트 이름</b> 옵션 필드에\n" -"클라이언트의 DHCP 메시지에 있는 특정 스트링이 포함되어야 합니다. 현재 호스트 " -"이름\n" -"(예: <tt>/etc/HOSTNAME</tt>에 정의된 이름)을 보내려면 <b>AUTO</b>를 그대로 두" -"십시오. \n" +"클라이언트의 DHCP 메시지에 있는 특정 스트링이 포함되어야 합니다. 현재 호스트 이름\n" +"(예: <tt>/etc/HOSTNAME</tt>에 정의된 이름)을 보내려면 <b>AUTO</b>를 그대로 두십시오. \n" "호스트 이름을 보내지 않으려면 필드를 비워 두십시오.</p>\n" -#. Aliases dialog help 1/4 -#: src/include/network/lan/help.rb:278 +#. Aliases dialog help 1/4 +#: src/include/network/lan/help.rb:278 msgid "" "<p><b><big>Additional Addresses</big></b></p>\n" "<p>Configure additional addresses of an interface in this table.</p>\n" @@ -2719,8 +2584,8 @@ "<p><b><big>추가 주소</big></b></p>\n" "<p>이 테이블에서 인터페이스의 추가 주소를 구성하십시오.</p>\n" -#. Aliases dialog help 2/4 -#: src/include/network/lan/help.rb:282 +#. Aliases dialog help 2/4 +#: src/include/network/lan/help.rb:282 msgid "" "<p>Enter an <b>IPv4 Address Label</b>, an <b>IP Address</b>, and\n" "the <b>Netmask</b>.</p>" @@ -2728,33 +2593,26 @@ "<p><b>IPv4 주소 레이블</b>, <b>IP 주소</b> 및\n" "<b>넷마스크</b>를 입력하십시오.</p>" -#. Aliases dialog help 3/4 -#: src/include/network/lan/help.rb:286 +#. Aliases dialog help 3/4 +#: src/include/network/lan/help.rb:286 msgid "" -"<p><b>IPv4 Address Label</b>, formerly known as Alias Name, is optional and " -"legacy. The total\n" +"<p><b>IPv4 Address Label</b>, formerly known as Alias Name, is optional and legacy. The total\n" "length of interface name (inclusive of the colon and label) is\n" -"limited to 15 characters. The obsolete ifconfig utility truncates it after 9 " -"characters.</p>" +"limited to 15 characters. The obsolete ifconfig utility truncates it after 9 characters.</p>" msgstr "" -"<p><b>IPv4 주소 레이블</b>은 이전에 별칭 이름으로 알려진 선택 사항이며 레거시" -"입니다. 인터페이스\n" +"<p><b>IPv4 주소 레이블</b>은 이전에 별칭 이름으로 알려진 선택 사항이며 레거시입니다. 인터페이스\n" "이름의 총 길이(콜론과 레이블 포함)는\n" "15자로 제한됩니다. 구식 ifconfig 유틸리티는 9자 뒤에서 자릅니다.</p>" -#. Aliases dialog help 3/4, #83766 -#: src/include/network/lan/help.rb:292 -msgid "" -"<p>Do not include the interface name in the label. For example, enter " -"<b>foo</b> instead of <b>eth0:foo</b>.</p>" -msgstr "" -"<p>레이블에 인터페이스 이름을 포함하지 마십시오. 예를 들어 <b>eth0:foo</b>가 " -"아니라 <b>foo</b>라고 입력합니다.</p>" +#. Aliases dialog help 3/4, #83766 +#: src/include/network/lan/help.rb:292 +msgid "<p>Do not include the interface name in the label. For example, enter <b>foo</b> instead of <b>eth0:foo</b>.</p>" +msgstr "<p>레이블에 인터페이스 이름을 포함하지 마십시오. 예를 들어 <b>eth0:foo</b>가 아니라 <b>foo</b>라고 입력합니다.</p>" -#. shared between WirelessDialog and WirelessKeyPopup -#. this is suited to the button-switched key typing -#. Translators: dialog help -#: src/include/network/lan/help.rb:299 +#. shared between WirelessDialog and WirelessKeyPopup +#. this is suited to the button-switched key typing +#. Translators: dialog help +#: src/include/network/lan/help.rb:299 msgid "" "<p>Choose between three <b>Key Input Types</b> for your key.\n" "<br><b>Passphrase</b>: The key is generated from the phrase entered.\n" @@ -2782,8 +2640,8 @@ "<tt>0a5f-41e6-48</tt>).\n" "</p> \n" -#. Wireless dialog help -#: src/include/network/lan/help.rb:314 +#. Wireless dialog help +#: src/include/network/lan/help.rb:314 msgid "" "<p>Here, set the most important settings\n" "for wireless networking.</p>" @@ -2791,7 +2649,7 @@ "<p>이곳에서 무선네트워크를 위한 중요한 설정을\n" "하십시오.</p>" -#: src/include/network/lan/help.rb:317 +#: src/include/network/lan/help.rb:317 msgid "" "<p>The <b>Operating Mode</b> depends on the network topology. The mode\n" "can be <b>Ad-Hoc</b> (peer-to-peer network without an access point),\n" @@ -2805,27 +2663,25 @@ " 지점에 의해 관리되는 네트워크), 또는 <b>마스터</b>(네트워크 카드가\n" " 액세스 지점 역할을 함)가 있습니다.</p>\n" -#: src/include/network/lan/help.rb:324 +#: src/include/network/lan/help.rb:324 msgid "" "<p>Set the <b>Network Name (ESSID)</b> used to identify\n" "cells that are part of the same virtual network. All stations in a\n" "wireless LAN need the same ESSID to communicate with each other. If\n" -"you choose the operation mode <b>Managed</b> and no <b>WPA</b> " -"authentication mode,\n" +"you choose the operation mode <b>Managed</b> and no <b>WPA</b> authentication mode,\n" "you can leave this field empty or set it to <tt>any</tt>. In this\n" "case, your WLAN card associates with the access point with the best\n" "signal strength.</p>\n" msgstr "" "<p>같은 가상 네트워크의 일부인 셀을 식별하기 위해 사용되는\n" "<b>네트워크 이름(ESSID)</b>을 설정하십시오. 무선 LAN의\n" -" 모든 스테이션에는 상호 통신을 위해 동일한 ESSID가 필요합니다. <b>관리됨\n" +" 모든 스테이션에는 상호 통신을 위해 동일한 ESSID가 필요합니다. <b>관리됨</b>\n" " 작동 모드를 선택하고 <b>WPA</b> 인증 모드를 선택하지 않은 경우,\n" " 이 필드를 비워 두거나 <tt>any</tt>로 설정할 수 있습니다. 이 경우\n" " WLAN 카드는 신호 강도가 가장 뛰어난 액세스 지점과\n" " 결합됩니다.</p>\n" -#: src/include/network/lan/help.rb:333 +#: src/include/network/lan/help.rb:333 msgid "" "<p>In some networks, you need to set an <b>Authentication Mode</b>.\n" "It depends on the protection technology used, WEP or WPA. <b>WEP</b>\n" @@ -2838,8 +2694,7 @@ "NOTE: Shared key authentication makes it easier for a\n" "potential attacker to break into your network. Unless you have\n" "specific needs for shared key authentication, use the <b>Open</b>\n" -"mode. Because WEP has been proven insecure, <b>WPA</b> (Wi-Fi Protected " -"Access)\n" +"mode. Because WEP has been proven insecure, <b>WPA</b> (Wi-Fi Protected Access)\n" "was defined to close its security holes, but not all hardware supports\n" "WPA. If you want to use WPA, select <b>WPA-PSK</b> or <b>WPA-EAP</b> as the\n" "authentication mode. This is only possible in the operation mode\n" @@ -2851,21 +2706,18 @@ "선택적 인증을 통해 무선 네트워크 트래픽을 암호화하는 \n" "시스템입니다. WEP를 사용하는 경우 대부분 <b>WEP - 공개</b> 모드(인증\n" "없음)가 적합합니다. 그러나 WEP 암호화를 사용할 수\n" -"없는 것은 아닙니다(이 때는 <b>암호화 없음</b> 사용). 일부 네트워크에는 " -"<b>WEP - 공유 키</b> \n" +"없는 것은 아닙니다(이 때는 <b>암호화 없음</b> 사용). 일부 네트워크에는 <b>WEP - 공유 키</b> \n" "인증이 필요할 수 있습니다.\n" "참고: 공유 키 인증을 사용할 경우 잠재적 공격자가 \n" "네트워크에 침입하기가 더 쉽습니다. 공유 키 인증을 \n" "사용해야 할 특별한 이유가 없다면 <b>공개</b> 모드를\n" -"사용하십시오. WEP가 보안에 취약한 것으로 입증되었으므로, <b>WPA</b>(Wi-Fi " -"Protected Access)가 \n" -"보안 취약성을 해결하도록 정의되었습니다. 그러나 모든 하드웨어가 WPA를 지원하" -"는\n" +"사용하십시오. WEP가 보안에 취약한 것으로 입증되었으므로, <b>WPA</b>(Wi-Fi Protected Access)가 \n" +"보안 취약성을 해결하도록 정의되었습니다. 그러나 모든 하드웨어가 WPA를 지원하는\n" "것은 아닙니다. WPA를 사용할 경우 인증 모드로 <b>WPA-PSK</b> 또는 \n" "<b>WPA-EAP</b>를 선택하십시오. 이것은 <b>관리됨</b> 작동 모드에서만 \n" "가능합니다.</p>\n" -#: src/include/network/lan/help.rb:351 +#: src/include/network/lan/help.rb:351 msgid "" "<p>To use WEP, enter the\n" "WEP encryption key to use. It can have a key\n" @@ -2879,8 +2731,8 @@ " 지원하는 것은 아닙니다. 이러한 키의 24비트는\n" " 자동으로 생성되므로 40에서 232비트까지만 입력하면 됩니다.</p>\n" -#. Wireless dialog help -#: src/include/network/lan/help.rb:359 +#. Wireless dialog help +#: src/include/network/lan/help.rb:359 msgid "" "<p>To use WPA-PSK (sometimes referred to as WPA Home),\n" "enter the preshared key. This\n" @@ -2896,7 +2748,7 @@ " 여전히 사전 공격을 받을 가능성이 존재합니다. 추측하기 쉬운\n" " 단어를 비밀문구로 사용하지 마십시오.</p>\n" -#: src/include/network/lan/help.rb:367 +#: src/include/network/lan/help.rb:367 msgid "" "<p>To use WPA-EAP (sometimes referred to as WPA Enterprise),\n" "enter some additional parameters in the next dialog.</p>\n" @@ -2904,12 +2756,11 @@ "<p>WPA-EAP(WPA Enterprise라고도 함)를 사용하려면\n" "다음 대화 상자에 몇 가지 추가 매개변수를 입력하십시오.</p>\n" -#: src/include/network/lan/help.rb:370 +#: src/include/network/lan/help.rb:370 msgid "" "<p>These values will be written to the interface configuration file\n" "'ifcfg-*' in '/etc/sysconfig/network'. If you need additional settings,\n" -"add them manually. Refer to the file 'wireless' in the same directory for " -"all\n" +"add them manually. Refer to the file 'wireless' in the same directory for all\n" "available options.</p>" msgstr "" "<p>이 값들은 '/etc/sysconfig/network'에 'ifcfg-*'의 파일로 저장이 됩니다.\n" @@ -2917,76 +2768,76 @@ "모든 유용한 옵션은 같은 디렉토리의 'wireless'를참조해 \n" "주십시오.</p>" -#. TextEntry label -#: src/include/network/lan/virtual.rb:203 +#. TextEntry label +#: src/include/network/lan/virtual.rb:203 msgid "IPv4 &Address Label" msgstr "IPv4 주소 레이블(&A)" -#. TextEntry label -#: src/include/network/lan/virtual.rb:211 +#. TextEntry label +#: src/include/network/lan/virtual.rb:211 msgid "Net&mask" msgstr "(&M)넷마스크" -#. Popup::Error text -#: src/include/network/lan/virtual.rb:241 +#. Popup::Error text +#: src/include/network/lan/virtual.rb:241 msgid "Label is too long." msgstr "레이블이 너무 깁니다." -#. Popup::Error text -#. Popup::Error text -#: src/include/network/lan/virtual.rb:251 -#: src/include/network/services/host.rb:371 +#. Popup::Error text +#. Popup::Error text +#: src/include/network/lan/virtual.rb:251 +#: src/include/network/services/host.rb:371 msgid "The IP address is invalid." msgstr "IP 주소가 정확하지 않습니다." -#. Popup::Error text -#: src/include/network/lan/virtual.rb:260 +#. Popup::Error text +#: src/include/network/lan/virtual.rb:260 msgid "The subnet mask is invalid." msgstr "서브넷 마스크가 잘못되었습니다." -#. Translators: input type for a wireless key -#. radio button group label -#: src/include/network/lan/wireless.rb:54 +#. Translators: input type for a wireless key +#. radio button group label +#: src/include/network/lan/wireless.rb:54 msgid "Key Input Type" msgstr "키 입력 형식" -#. Translators: input type for a wireless key -#: src/include/network/lan/wireless.rb:58 +#. Translators: input type for a wireless key +#: src/include/network/lan/wireless.rb:58 msgid "&Passphrase" msgstr "비밀문구(&P)" -#. Translators: input type for a wireless key -#: src/include/network/lan/wireless.rb:61 +#. Translators: input type for a wireless key +#: src/include/network/lan/wireless.rb:61 msgid "&ASCII" msgstr "ASCII(&A)" -#. Translators: input type for a wireless key -#. (Hexadecimal) -#: src/include/network/lan/wireless.rb:65 +#. Translators: input type for a wireless key +#. (Hexadecimal) +#: src/include/network/lan/wireless.rb:65 msgid "&Hexadecimal" msgstr "16진수(&H)" -#. combo box label -#: src/include/network/lan/wireless.rb:75 +#. combo box label +#: src/include/network/lan/wireless.rb:75 msgid "EAP &Mode" msgstr "EAP 모드(&M)" -#. combo box item, one of WPA EAP modes -#: src/include/network/lan/wireless.rb:79 +#. combo box item, one of WPA EAP modes +#: src/include/network/lan/wireless.rb:79 msgid "TTLS" msgstr "TTLS" -#. combo box item, one of WPA EAP modes -#: src/include/network/lan/wireless.rb:81 +#. combo box item, one of WPA EAP modes +#: src/include/network/lan/wireless.rb:81 msgid "PEAP" msgstr "PEAP" -#. combo box item, one of WPA EAP modes -#: src/include/network/lan/wireless.rb:83 +#. combo box item, one of WPA EAP modes +#: src/include/network/lan/wireless.rb:83 msgid "TLS" msgstr "TLS" -#: src/include/network/lan/wireless.rb:85 +#: src/include/network/lan/wireless.rb:85 msgid "" "<p>WPA-EAP uses a RADIUS server to authenticate users. There\n" "are different methods in EAP to connect to the server and\n" @@ -2996,45 +2847,43 @@ "서버에 연결하여 인증을 수행하는 방법에는\n" " TLS, TTLS 및 PEAP와 같은 서로 다른 방법에 있습니다.</p>\n" -#. text entry label -#: src/include/network/lan/wireless.rb:98 +#. text entry label +#: src/include/network/lan/wireless.rb:98 msgid "&Identity" msgstr "ID(&I)" -#: src/include/network/lan/wireless.rb:100 +#: src/include/network/lan/wireless.rb:100 msgid "" "<p>For TTLS and PEAP, enter your <b>Identity</b>\n" "and <b>Password</b> as configured on the server.\n" "If you have special requirements to set the username used as\n" -"<b>Anonymous Identity</b>, you may set it here. This is usually not needed.\n" +"<b>Anonymous Identity</b>, you may set it here. This is usually not needed.</p>\n" msgstr "" "<p>TTLS 및 PEAP의 경우 서버에 구성되어 있는 바와\n" " 같이 본인의 <b>ID</b>와 <b>암호</b>를 입력하십시오.\n" " 사용자 이름을 <b>익명 ID</b>로 사용하도록 설정하는 데 특별한 요구 사항이 \n" "있다면 여기에서 설정할 수 있습니다. 대개는 필요하지 않습니다. </p>\n" -#. text entry label -#: src/include/network/lan/wireless.rb:110 +#. text entry label +#: src/include/network/lan/wireless.rb:110 msgid "&Anonymous Identity" msgstr "익명 ID(&A)" -#. or password? -#. text entry label -#: src/include/network/lan/wireless.rb:118 +#. or password? +#. text entry label +#: src/include/network/lan/wireless.rb:118 msgid "&Password" msgstr "암호(&P)" -#. text entry label -#: src/include/network/lan/wireless.rb:125 +#. text entry label +#: src/include/network/lan/wireless.rb:125 msgid "&Client Certificate" msgstr "클라이언트 인증서(&C)" -#: src/include/network/lan/wireless.rb:127 +#: src/include/network/lan/wireless.rb:127 msgid "" "<p>TLS uses a <b>Client Certificate</b> instead of a username and\n" -"password combination for authentication. It uses a public and private key " -"pair\n" +"password combination for authentication. It uses a public and private key pair\n" "to encrypt negotiation communication, therefore you will additionally need\n" "a <b>Client Key</b> file that contains your private key and\n" "the appropriate <b>Client Key Password</b> for that file.</p>\n" @@ -3045,24 +2894,24 @@ " <b>클라이언트 키</b> 파일과 이 파일에 대한 적절한\n" " <b>클라이언트 키 비밀번호</b>가 추가로 필요합니다.</p>\n" -#. text entry label -#: src/include/network/lan/wireless.rb:143 +#. text entry label +#: src/include/network/lan/wireless.rb:143 msgid "Client &Key" msgstr "클라이언트 키(&K)" -#. or password? -#. text entry label -#: src/include/network/lan/wireless.rb:156 +#. or password? +#. text entry label +#: src/include/network/lan/wireless.rb:156 msgid "Client Key Pass&word" msgstr "클라이언트 키 비밀번호(&W)" -#. text entry label -#. aka certificate of the CA (certification authority) -#: src/include/network/lan/wireless.rb:166 +#. text entry label +#. aka certificate of the CA (certification authority) +#: src/include/network/lan/wireless.rb:166 msgid "&Server Certificate" msgstr "서버 인증서(&S)" -#: src/include/network/lan/wireless.rb:170 +#: src/include/network/lan/wireless.rb:170 msgid "" "<p>To increase security, it is recommended to configure\n" "a <b>Server Certificate</b>. It is used\n" @@ -3072,12 +2921,12 @@ "구성하는 것이 좋습니다. 서버 인증서는\n" " 서버의 신뢰성 검증을 위해 사용됩니다.</p>\n" -#. push button label -#: src/include/network/lan/wireless.rb:211 +#. push button label +#: src/include/network/lan/wireless.rb:211 msgid "&Details" msgstr "세부 사항(&D)" -#: src/include/network/lan/wireless.rb:220 +#: src/include/network/lan/wireless.rb:220 msgid "" "If you do not know your ID and password or you do not have\n" "any certificate or key files, contact your system administrator.\n" @@ -3085,12 +2934,12 @@ "ID와 비밀번호를 모르거나 인증서 또는 키 파일이 없는 경우\n" "시스템 관리자에게 문의하십시오.\n" -#. combo box label -#: src/include/network/lan/wireless.rb:238 +#. combo box label +#: src/include/network/lan/wireless.rb:238 msgid "&Authentication Method" msgstr "인증 방법(&A)" -#: src/include/network/lan/wireless.rb:239 +#: src/include/network/lan/wireless.rb:239 msgid "" "<p>Here you can configure the inner authentication (also known as phase 2)\n" "method. By default, all methods are allowed. If you want to restrict the\n" @@ -3102,12 +2951,12 @@ " 제한하고자 하거나 인증과 관련하여 문제가 있었던 경우 내부 인증 방법을\n" " 선택할 수 있습니다.</p>\n" -#. radio button group label -#: src/include/network/lan/wireless.rb:249 +#. radio button group label +#: src/include/network/lan/wireless.rb:249 msgid "&PEAP Version" msgstr "PEAP 버전(&P)" -#: src/include/network/lan/wireless.rb:250 +#: src/include/network/lan/wireless.rb:250 msgid "" "<p>If you are using PEAP, you can also force the use of a specific PEAP\n" "implementation (version 0 or 1). Normally this should not be necessary.</p>\n" @@ -3115,134 +2964,134 @@ "<p>PEAP를 사용하는 경우 특정 PEAP 구현(버전 0 또는 1)을 사용하도록 설정할\n" "수 있습니다. 일반적으로 이 작업은 필요하지 않습니다.</p>\n" -#. radio button: any version of PEAP -#: src/include/network/lan/wireless.rb:255 +#. radio button: any version of PEAP +#: src/include/network/lan/wireless.rb:255 msgid "&Any" msgstr "모두(&A)" -#. Wireless authentication modes: -#. ComboBox item -#: src/include/network/lan/wireless.rb:353 +#. Wireless authentication modes: +#. ComboBox item +#: src/include/network/lan/wireless.rb:353 msgid "No Encryption" msgstr "암호화 없음" -#. ComboBox item -#: src/include/network/lan/wireless.rb:357 +#. ComboBox item +#: src/include/network/lan/wireless.rb:357 msgid "WEP - Open" msgstr "WEP - 공개" -#. ComboBox item -#: src/include/network/lan/wireless.rb:359 +#. ComboBox item +#: src/include/network/lan/wireless.rb:359 msgid "WEP - Shared Key" msgstr "WEP - 공유 키" -#. ComboBox item -#. Ask me what it means, I don't know yet -#: src/include/network/lan/wireless.rb:362 +#. ComboBox item +#. Ask me what it means, I don't know yet +#: src/include/network/lan/wireless.rb:362 msgid "WPA-PSK (WPA version 1 or 2)" msgstr "WPA-PSK(WPA 버전 1 또는 2)" -#. ComboBox item -#: src/include/network/lan/wireless.rb:366 +#. ComboBox item +#: src/include/network/lan/wireless.rb:366 msgid "WPA-EAP (WPA version 1 or 2)" msgstr "WPA-EAP(WPA 버전 1 또는 2)" -#. Wireless dialog caption -#: src/include/network/lan/wireless.rb:390 +#. Wireless dialog caption +#: src/include/network/lan/wireless.rb:390 msgid "Wireless Network Card Configuration" msgstr "무선 네트워크 카드 설정" -#. Frame label -#: src/include/network/lan/wireless.rb:420 +#. Frame label +#: src/include/network/lan/wireless.rb:420 msgid "Wireless Device Settings" msgstr "무선 장치 설정들" -#. ComboBox label -#: src/include/network/lan/wireless.rb:429 +#. ComboBox label +#: src/include/network/lan/wireless.rb:429 msgid "O&perating Mode" msgstr "작동 모드(&P)" -#. ComboBox item -#: src/include/network/lan/wireless.rb:432 +#. ComboBox item +#: src/include/network/lan/wireless.rb:432 msgid "Ad-Hoc" msgstr "애드혹" -#. ComboBox item -#: src/include/network/lan/wireless.rb:436 +#. ComboBox item +#: src/include/network/lan/wireless.rb:436 msgid "Master" msgstr "주" -#. Text entry label -#: src/include/network/lan/wireless.rb:445 +#. Text entry label +#: src/include/network/lan/wireless.rb:445 msgid "Ne&twork Name (ESSID)" msgstr "네트워크 이름(ESSID)(&T)" -#: src/include/network/lan/wireless.rb:448 +#: src/include/network/lan/wireless.rb:448 msgid "Scan Network" msgstr "네트워크 검색" -#. ComboBox label -#: src/include/network/lan/wireless.rb:455 +#. ComboBox label +#: src/include/network/lan/wireless.rb:455 msgid "&Authentication Mode" msgstr "인증 모드(&A)" -#. Text entry label -#: src/include/network/lan/wireless.rb:462 +#. Text entry label +#: src/include/network/lan/wireless.rb:462 msgid "&Encryption Key" msgstr "암호화 키(&E)" -#. PushButton label -#: src/include/network/lan/wireless.rb:471 +#. PushButton label +#: src/include/network/lan/wireless.rb:471 msgid "E&xpert Settings" msgstr "고급 설정(&X)" -#. PushButton label, keys for WEP encryption -#: src/include/network/lan/wireless.rb:474 +#. PushButton label, keys for WEP encryption +#: src/include/network/lan/wireless.rb:474 msgid "&WEP Keys" msgstr "WEP 키(&W)" -#. Popup text -#: src/include/network/lan/wireless.rb:558 +#. Popup text +#: src/include/network/lan/wireless.rb:558 msgid "WPA authentication mode is only possible in managed operating mode." msgstr "WPA 인증 모드는 관리됨 작동 모드에서만 가능합니다." -#. Popup text -#. modes: combination of operation and authentication -#: src/include/network/lan/wireless.rb:569 +#. Popup text +#. modes: combination of operation and authentication +#: src/include/network/lan/wireless.rb:569 msgid "Specify the network name for this mode." msgstr "이 모드에 대한 네트워크 이름을 지정하십시오." -#. Popup text -#: src/include/network/lan/wireless.rb:576 +#. Popup text +#: src/include/network/lan/wireless.rb:576 msgid "The network name must be shorter than 32 characters." msgstr "네트워크 이름은 32자 미만이어야 합니다." -#. Error popup -#: src/include/network/lan/wireless.rb:596 +#. Error popup +#: src/include/network/lan/wireless.rb:596 msgid "The passphrase must have between 8 and 63 characters (inclusively)." msgstr "비밀문구는 8에서 63글자 사이여야 합니다(8과 63 포함)." -#. Error popup -#: src/include/network/lan/wireless.rb:607 +#. Error popup +#: src/include/network/lan/wireless.rb:607 msgid "The key must have %1 hexadecimal digits." msgstr "키는 %1자릿수의 16진수여야 합니다." -#. Popup text -#. Popup text -#: src/include/network/lan/wireless.rb:619 -#: src/include/network/lan/wireless.rb:941 +#. Popup text +#. Popup text +#: src/include/network/lan/wireless.rb:619 +#: src/include/network/lan/wireless.rb:941 msgid "The encryption key is invalid." msgstr "암호화 키가 적절하지 않습니다." -#. error -#. Popup text -#: src/include/network/lan/wireless.rb:627 +#. error +#. Popup text +#: src/include/network/lan/wireless.rb:627 msgid "The encryption key must be specified for this authentication mode." msgstr "이 인증 모드에 대해서는 암호화 키를 지정해야 합니다." -#. warning only -#. Popup text -#: src/include/network/lan/wireless.rb:634 +#. warning only +#. Popup text +#: src/include/network/lan/wireless.rb:634 msgid "" "Using no encryption is a security risk.\n" "Really continue?\n" @@ -3250,15 +3099,15 @@ "암호화를 사용하지 않으면 보안 위험 요소가 됩니다.\n" "계속하시겠습니까?\n" -#. Wireless expert dialog caption -#. Frame label -#: src/include/network/lan/wireless.rb:694 -#: src/include/network/lan/wireless.rb:775 +#. Wireless expert dialog caption +#. Frame label +#: src/include/network/lan/wireless.rb:694 +#: src/include/network/lan/wireless.rb:775 msgid "Wireless Expert Settings" msgstr "무선 고급 설정" -#. Wireless expert dialog help 1/5 -#: src/include/network/lan/wireless.rb:697 +#. Wireless expert dialog help 1/5 +#: src/include/network/lan/wireless.rb:697 msgid "" "<p>Here, set additional configuration parameters\n" "(rarely needed).</p>" @@ -3266,23 +3115,21 @@ "<p>여기에서는 추가 구성 매개 변수를 설정합니다.\n" "대부분의 경우에는 이러한 설정이 필요하지 않습니다.</p>" -#. Wireless expert dialog help 2/5 -#: src/include/network/lan/wireless.rb:701 +#. Wireless expert dialog help 2/5 +#: src/include/network/lan/wireless.rb:701 msgid "" "<p>To use your wireless LAN card in master or ad-hoc mode,\n" "set the <b>Channel</b> the card should use here. This is not needed\n" -"for managed mode--the card will hop through the channels searching for " -"access\n" +"for managed mode--the card will hop through the channels searching for access\n" "points in that case.</p>\n" msgstr "" "<p>마스터 또는 애드혹 모드에서 무선 LAN 카드를 사용하려면\n" -"카드가 사용해야 할 <b>채널</b>을 설정하십시오. 관리됨 모드에서는 이것이 필요" -"하지 않습니다.\n" +"카드가 사용해야 할 <b>채널</b>을 설정하십시오. 관리됨 모드에서는 이것이 필요하지 않습니다.\n" " 이 모드에서는 카드가 채널을 돌아다니며 액세스 지점을\n" " 검색합니다.</p>\n" -#. Wireless expert dialog help 3/5 -#: src/include/network/lan/wireless.rb:708 +#. Wireless expert dialog help 3/5 +#: src/include/network/lan/wireless.rb:708 msgid "" "<p>In some rare cases, you may want to set a transmission\n" "<b>Bit Rate</b> explicitly. The default is to go as fast as possible.</p>" @@ -3290,18 +3137,17 @@ "<p>경우에 따라서는 <b>비트 전송률</b>을 명시적으로 설정해야\n" "할 수 있습니다. 가장 빠른 전송률이 기본값으로 사용됩니다.</p>" -#. Wireless expert dialog help 4/5 -#: src/include/network/lan/wireless.rb:712 +#. Wireless expert dialog help 4/5 +#: src/include/network/lan/wireless.rb:712 msgid "" "<p>In an environment with multiple <b>Access Points</b>, you may want to\n" "define the one to which to connect by entering its MAC address.</p>" msgstr "" -"<p><b>액세스 포인트</b>가 여러 개 있는 환경에서는 연결하는 데 사용할 액세스 " -"포인트의 MAC\n" +"<p><b>액세스 포인트</b>가 여러 개 있는 환경에서는 연결하는 데 사용할 액세스 포인트의 MAC\n" "주소를 입력하여 액세스 포인트를 한 개 정의할 수 있습니다.</p>" -#. Wireless expert dialog help 5/5 -#: src/include/network/lan/wireless.rb:716 +#. Wireless expert dialog help 5/5 +#: src/include/network/lan/wireless.rb:716 msgid "" "<p><b>Use Power Management</b> enables power saving mechanisms.\n" "This is generally a good idea, especially if you are a laptop user and may\n" @@ -3311,63 +3157,62 @@ "랩탑 사용자이면서 AC 전원 공급이 중단될 가능성이 있는 경우에는\n" " 일반적으로 이 옵션을 선택하는 것이 좋습니다.</p>\n" -#. Combobox item -#. Combobox item -#: src/include/network/lan/wireless.rb:744 -#: src/include/network/lan/wireless.rb:766 +#. Combobox item +#. Combobox item +#: src/include/network/lan/wireless.rb:744 +#: src/include/network/lan/wireless.rb:766 msgid "Automatic" msgstr "자동 설정" -#. Combobox label -#: src/include/network/lan/wireless.rb:781 +#. Combobox label +#: src/include/network/lan/wireless.rb:781 msgid "&Channel" msgstr "채널(&C)" -#. Combobox label -#: src/include/network/lan/wireless.rb:784 +#. Combobox label +#: src/include/network/lan/wireless.rb:784 msgid "B&it Rate" msgstr "비트 전송률(&I)" -#. Text entry label -#: src/include/network/lan/wireless.rb:790 +#. Text entry label +#: src/include/network/lan/wireless.rb:790 msgid "&Access Point" msgstr "액세스 포인트(&A)" -#. CheckBox label -#: src/include/network/lan/wireless.rb:798 +#. CheckBox label +#: src/include/network/lan/wireless.rb:798 msgid "Use &Power Management" msgstr "전원 관리 사용(&P)" -#: src/include/network/lan/wireless.rb:807 +#: src/include/network/lan/wireless.rb:807 msgid "AP ScanMode" msgstr "AP ScanMode" -#. Translators: popup dialog heading -#: src/include/network/lan/wireless.rb:899 +#. Translators: popup dialog heading +#: src/include/network/lan/wireless.rb:899 msgid "Enter Encryption Key" msgstr "암호화 키 입력" -#. Translators: text entry label -#: src/include/network/lan/wireless.rb:903 +#. Translators: text entry label +#: src/include/network/lan/wireless.rb:903 msgid "&Key" msgstr "키(&K)" -#. Translators: popup title -#: src/include/network/lan/wireless.rb:927 +#. Translators: popup title +#: src/include/network/lan/wireless.rb:927 msgid "Help" msgstr "도움말" -#. Wireless keys dialog caption -#: src/include/network/lan/wireless.rb:976 +#. Wireless keys dialog caption +#: src/include/network/lan/wireless.rb:976 msgid "Wireless Keys" msgstr "무선 키" -#. Wireless keys dialog help 1/3 -#: src/include/network/lan/wireless.rb:979 +#. Wireless keys dialog help 1/3 +#: src/include/network/lan/wireless.rb:979 msgid "" "<p>In this dialog, define your WEP keys used\n" -"to encrypt your data before it is transmitted. You can have up to four " -"keys,\n" +"to encrypt your data before it is transmitted. You can have up to four keys,\n" "although only one key is used to encrypt the data. This is the default key.\n" "The other keys can be used to decrypt data. Usually you have only\n" "one key.</p>" @@ -3378,8 +3223,8 @@ "다른 키는 데이터 암호를 해독하는 데 사용될 수 있습니다. 일반적으로는\n" "키를 하나만 사용합니다.</p>" -#. Wireless keys dialog help 2/3 -#: src/include/network/lan/wireless.rb:987 +#. Wireless keys dialog help 2/3 +#: src/include/network/lan/wireless.rb:987 msgid "" "<p><b>Key Length</b> defines the bit length of your WEP keys.\n" "Possible are 64 and 128 bit, sometimes also referred to as 40 and 104 bit.\n" @@ -3388,60 +3233,58 @@ "value to 64.</p>" msgstr "" "<p><b>키 길이</b>는 WEP 키의 비트 길이를 정의합니다.\n" -"64비트와 128비트 중에서 선택할 수 있으며 이러한 값을 40비트 및 104비트라고" -"도\n" +"64비트와 128비트 중에서 선택할 수 있으며 이러한 값을 40비트 및 104비트라고도\n" "합니다. 일부 구형 하드웨어에서는 128비트 키를 처리하지 못할 수 있으므로\n" "무선 LAN 연결을 설정할 수 없는 경우에는 이 값을 64로 설정해야 할 수도\n" "있습니다.</p>" -#. Frame label -#: src/include/network/lan/wireless.rb:1012 +#. Frame label +#: src/include/network/lan/wireless.rb:1012 msgid "WEP Keys" msgstr "WEP 키" -#. ComboBox label -#: src/include/network/lan/wireless.rb:1018 +#. ComboBox label +#: src/include/network/lan/wireless.rb:1018 msgid "&Key Length" msgstr "키 길이(&K)" -#. Table header label -#. Abbreviation of Number -#: src/include/network/lan/wireless.rb:1026 +#. Table header label +#. Abbreviation of Number +#: src/include/network/lan/wireless.rb:1026 msgid "No." msgstr "번호" -#. Table header label -#: src/include/network/lan/wireless.rb:1028 +#. Table header label +#: src/include/network/lan/wireless.rb:1028 msgid "Key" msgstr "키(&K)" -#. Table header label -#: src/include/network/lan/wireless.rb:1030 +#. Table header label +#: src/include/network/lan/wireless.rb:1030 msgid "Default" msgstr "기본" -#. PushButton label -#: src/include/network/lan/wireless.rb:1040 +#. PushButton label +#: src/include/network/lan/wireless.rb:1040 msgid "&Set as Default" msgstr "기본값으로 설정(&S)" -#. file browser dialog headline -#: src/include/network/lan/wireless.rb:1214 +#. file browser dialog headline +#: src/include/network/lan/wireless.rb:1214 msgid "Choose a Certificate" msgstr "인증서 선택" -#. validated in ValidateWpaEap -#: src/include/network/lan/wireless.rb:1257 +#. validated in ValidateWpaEap +#: src/include/network/lan/wireless.rb:1257 msgid "" -"Not using a Certificate Authority (CA) certificate can result in " -"connections\n" +"Not using a Certificate Authority (CA) certificate can result in connections\n" "to insecure, rogue wireless networks. Continue without CA ?" msgstr "" "인증 기관(CA) 인증서를 사용하지 않으면 안전하지 않은 악의적 네트워크에\n" "연결될 수 있습니다. CA 없이 계속합니까?" -#. error popup text -#: src/include/network/lan/wireless.rb:1285 +#. error popup text +#: src/include/network/lan/wireless.rb:1285 msgid "" "Enter either the identity and password\n" "or the client certificate." @@ -3449,115 +3292,111 @@ "ID와 비밀번호 또는 클라이언트 인증서를\n" "입력하십시오." -#. dialog caption -#: src/include/network/lan/wireless.rb:1331 +#. dialog caption +#: src/include/network/lan/wireless.rb:1331 msgid "WPA-EAP" msgstr "WPA-EAP" -#. combo box item, any of EAP authentication methods -#: src/include/network/lan/wireless.rb:1353 +#. combo box item, any of EAP authentication methods +#: src/include/network/lan/wireless.rb:1353 msgid "Any" msgstr "모두" -#. combo box item, an EAP authentication method -#: src/include/network/lan/wireless.rb:1357 +#. combo box item, an EAP authentication method +#: src/include/network/lan/wireless.rb:1357 msgid "MD5" msgstr "MD5" -#. combo box item, an EAP authentication method -#: src/include/network/lan/wireless.rb:1359 +#. combo box item, an EAP authentication method +#: src/include/network/lan/wireless.rb:1359 msgid "GTC" msgstr "GTC" -#. combo box item, an EAP authentication method -#: src/include/network/lan/wireless.rb:1361 +#. combo box item, an EAP authentication method +#: src/include/network/lan/wireless.rb:1361 msgid "CHAP" msgstr "CHAP" -#. combo box item, an EAP authentication method -#: src/include/network/lan/wireless.rb:1363 +#. combo box item, an EAP authentication method +#: src/include/network/lan/wireless.rb:1363 msgid "PAP" msgstr "PAP" -#. combo box item, an EAP authentication method -#: src/include/network/lan/wireless.rb:1365 +#. combo box item, an EAP authentication method +#: src/include/network/lan/wireless.rb:1365 msgid "MSCHAPv1" msgstr "MSCHAPv1" -#. combo box item, an EAP authentication method -#: src/include/network/lan/wireless.rb:1369 +#. combo box item, an EAP authentication method +#: src/include/network/lan/wireless.rb:1369 msgid "MSCHAPv2" msgstr "MSCHAPv2" -#. dialog caption -#: src/include/network/lan/wireless.rb:1392 +#. dialog caption +#: src/include/network/lan/wireless.rb:1392 msgid "WPA-EAP Details" msgstr "WPA-EAP 세부 사항" -#: src/include/network/lan/wizards.rb:100 +#: src/include/network/lan/wizards.rb:100 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. Ramote Administration dialog caption -#: src/include/network/remote/dialogs.rb:56 +#. Ramote Administration dialog caption +#: src/include/network/remote/dialogs.rb:56 msgid "Remote Administration" msgstr "원격 관리" -#. RadioButton label -#: src/include/network/remote/dialogs.rb:66 +#. RadioButton label +#: src/include/network/remote/dialogs.rb:66 msgid "&Allow Remote Administration With Session Management" msgstr "세션 관리를 통해 원격 관리 허용(&A)" -#. RadioButton label -#: src/include/network/remote/dialogs.rb:74 +#. RadioButton label +#: src/include/network/remote/dialogs.rb:74 msgid "&Allow Remote Administration Without Session Management" msgstr "세션 관리 없이 원격 관리 허용(&A)" -#. RadioButton label -#: src/include/network/remote/dialogs.rb:82 +#. RadioButton label +#: src/include/network/remote/dialogs.rb:82 msgid "&Do Not Allow Remote Administration" msgstr "원격 관리를 허용하지 않음(&D)" -#. Remote Administration dialog help -#. %1 and %2 are port numbers for vnc and vnchttp, eg. 5901, 5801 -#: src/include/network/remote/dialogs.rb:99 +#. Remote Administration dialog help +#. %1 and %2 are port numbers for vnc and vnchttp, eg. 5901, 5801 +#: src/include/network/remote/dialogs.rb:99 msgid "" "<p><b><big>Remote Administration Settings</big></b></p>\n" "<p>If this feature is enabled, you can\n" "administer this machine remotely from another machine. Use a VNC\n" "client, such as krdc (connect to <tt><hostname>:%1</tt>), or\n" -"a Java-capable Web browser (connect to <tt>https://<hostname>:%2/).</p>\n" +"a Java-capable Web browser (connect to <tt>https://<hostname>:%2/</tt>).</p>\n" "<p>Without Session Management, only one user can be connected\n" "at a time to a session, and that session is terminated when the VNC client\n" -"disconnects.</p><p>With Session Management, multiple users can interact with " -"a single\n" +"disconnects.</p><p>With Session Management, multiple users can interact with a single\n" "session, and the session may persist even if noone is connected.</p>" msgstr "" "<p><b><big>원격 관리 설정</big></b></p>\n" "<p>이 기능이 활성화된 경우 이 시스템을 다른 시스템에서 원격으로\n" "관리할 수 있습니다. krdc(<tt><hostname>:%1</tt> 연결)와 같은 VNC\n" "클라이언트 또는 \n" -"Java 지원 웹 브라우저(<tt>https://<hostname>:%2/</tt> 연결)를 사용하십" -"시오.</p>\n" +"Java 지원 웹 브라우저(<tt>https://<hostname>:%2/</tt> 연결)를 사용하십시오.</p>\n" "<p>세션 관리가 없으면 한 번에 한 명의 사용자만\n" "세션에 연결할 수 있고 VNC 클라이언트 연결이 끊기면 \n" -"세션이 종료됩니다.</p><p>세션 관리가 있으면 여러 사용자가 하나의 세션에 참" -"여\n" +"세션이 종료됩니다.</p><p>세션 관리가 있으면 여러 사용자가 하나의 세션에 참여\n" "할 수 있고 아무도 연결되어 있지 않아도 세션이 유지될 수 있습니다</p>" -#. Dialog frame title -#: src/include/network/remote/dialogs.rb:123 +#. Dialog frame title +#: src/include/network/remote/dialogs.rb:123 msgid "Remote Administration Settings" msgstr "원격 관리 설정" -#. Popup text -#: src/include/network/routines.rb:140 +#. Popup text +#: src/include/network/routines.rb:140 msgid "These packages need to be installed:" msgstr "다음 패키지를 설치해야 합니다.:" -#. Popup text -#: src/include/network/routines.rb:158 +#. Popup text +#: src/include/network/routines.rb:158 msgid "" "The required packages are not installed.\n" "The configuration will be aborted.\n" @@ -3569,28 +3408,28 @@ "\n" "다시 시도 하시겠습니까?\n" -#. Create a list of items for UI from the given hardware list. -#. -#. This list is used when selecting <ol> -#. <li> detected unconfigured cards, -#. there we want to see the link status </li> -#. <li> undetected cards manually. there is no link status there -#. and it won't be displayed. all is ok. </li> -#. </ol> -#. @param [Array<Hash>] l given list for conversion -#. @param [Fixnum] selected selected item (0 for the first) -#. @return a list of items -#: src/include/network/routines.rb:206 +#. Create a list of items for UI from the given hardware list. +#. +#. This list is used when selecting <ol> +#. <li> detected unconfigured cards, +#. there we want to see the link status </li> +#. <li> undetected cards manually. there is no link status there +#. and it won't be displayed. all is ok. </li> +#. </ol> +#. @param [Array<Hash>] l given list for conversion +#. @param [Fixnum] selected selected item (0 for the first) +#. @return a list of items +#: src/include/network/routines.rb:206 msgid "Unknown" msgstr "알수없음" -#. Disables all widgets which cannot be configured with current network service -#. -#. see bnc#433084 -#. if listed any items, disable them, if show_popup, show warning popup -#. -#. returns true if items were disabled -#: src/include/network/routines.rb:868 +#. Disables all widgets which cannot be configured with current network service +#. +#. see bnc#433084 +#. if listed any items, disable them, if show_popup, show warning popup +#. +#. returns true if items were disabled +#: src/include/network/routines.rb:868 msgid "" "Network is currently handled by NetworkManager\n" "or completely disabled. YaST is unable to configure some options." @@ -3598,36 +3437,36 @@ "현재 네트워크가 NetworkManager에 의해 처리되고 있거나\n" "or 완전히 비활성화되었습니다. YaST에서 일부 옵션을 구성할 수 없습니다." -#. Confirmation: label text (detecting hardware: xxx) -#: src/include/network/routines.rb:928 +#. Confirmation: label text (detecting hardware: xxx) +#: src/include/network/routines.rb:928 msgid "Network Cards" msgstr "네트워크 카드" -#. Confirmation: label text (detecting hardware: xxx) -#: src/include/network/routines.rb:932 +#. Confirmation: label text (detecting hardware: xxx) +#: src/include/network/routines.rb:932 msgid "Modems" msgstr "모뎀" -#. Confirmation: label text (detecting hardware: xxx) -#: src/include/network/routines.rb:936 +#. Confirmation: label text (detecting hardware: xxx) +#: src/include/network/routines.rb:936 msgid "ISDN Cards" msgstr "ISDN 카드" -#. Confirmation: label text (detecting hardware: xxx) -#: src/include/network/routines.rb:940 +#. Confirmation: label text (detecting hardware: xxx) +#: src/include/network/routines.rb:940 msgid "DSL Devices" msgstr "DSL 장치" -#: src/include/network/routines.rb:945 +#: src/include/network/routines.rb:945 msgid "All Network Devices" msgstr "모든 네트워크 장치" -#. Returns a generic message informing user that incorrect DHCLIENT_SET_HOSTNAME -#. setup was detected. -#. -#. @param [Array<String>] list of incorrectly configured devices -#. @return [String] a message stating that incorrect DHCLIENT_SET_HOSTNAME setup was detected -#: src/include/network/routines.rb:956 +#. Returns a generic message informing user that incorrect DHCLIENT_SET_HOSTNAME +#. setup was detected. +#. +#. @param [Array<String>] list of incorrectly configured devices +#. @return [String] a message stating that incorrect DHCLIENT_SET_HOSTNAME setup was detected +#: src/include/network/routines.rb:956 msgid "" "More than one interface asks to control the hostname via DHCP.\n" "If you keep the current settings, the behavior is non-deterministic.\n" @@ -3641,160 +3480,156 @@ "관련 구성 파일:\n" "%s\n" -#. validation error popup -#. Popup::Error text -#: src/include/network/services/dns.rb:80 -#: src/include/network/services/host.rb:383 +#. validation error popup +#. Popup::Error text +#: src/include/network/services/dns.rb:80 +#: src/include/network/services/host.rb:383 msgid "The hostname is invalid." msgstr "호스트 이름이 잘못되었습니다." -#: src/include/network/services/dns.rb:97 +#: src/include/network/services/dns.rb:97 msgid "&Domain Name" msgstr "도메인 이름(&D)" -#. validation error popup -#: src/include/network/services/dns.rb:112 +#. validation error popup +#: src/include/network/services/dns.rb:112 msgid "The domain name is invalid." msgstr "도메인 이름이 잘못되었습니다." -#: src/include/network/services/dns.rb:119 +#: src/include/network/services/dns.rb:119 msgid "Set Hostname via DHCP" msgstr "DHCP를 통해 호스트 이름 설정" -#: src/include/network/services/dns.rb:133 +#: src/include/network/services/dns.rb:133 msgid "&Assign Hostname to Loopback IP" msgstr "루프백 IP에 호스트 이름 할당(&A)" -#: src/include/network/services/dns.rb:139 +#: src/include/network/services/dns.rb:139 msgid "&Modify DNS Configuration" msgstr "DNS 구성 수정(&M)" -#: src/include/network/services/dns.rb:142 +#: src/include/network/services/dns.rb:142 msgid "Only Manually" msgstr "수동으로만" -#: src/include/network/services/dns.rb:143 +#: src/include/network/services/dns.rb:143 msgid "Use Default Policy" msgstr "기본 정책 사용" -#: src/include/network/services/dns.rb:144 +#: src/include/network/services/dns.rb:144 msgid "Use Custom Policy" msgstr "사용자 정의 정책 사용" -#: src/include/network/services/dns.rb:155 +#: src/include/network/services/dns.rb:155 msgid "&Custom Policy Rule" msgstr "사용자 정의 정책 규칙(&C)" -#: src/include/network/services/dns.rb:164 +#: src/include/network/services/dns.rb:164 msgid "Name Server &1" msgstr "이름 서버 &1" -#. validation error popup -#: src/include/network/services/dns.rb:180 +#. validation error popup +#: src/include/network/services/dns.rb:180 msgid "The IP address of the name server is invalid." msgstr "이름 서버의 IP 주소가 잘못되었습니다." -#. NAMESERVER_2 and NAMESERVER_3 are cloned in the dialog function -#: src/include/network/services/dns.rb:187 +#. NAMESERVER_2 and NAMESERVER_3 are cloned in the dialog function +#: src/include/network/services/dns.rb:187 msgid "Do&main Search" msgstr "도메인 검색(&M)" -#: src/include/network/services/dns.rb:212 +#: src/include/network/services/dns.rb:212 msgid "Name Server &2" msgstr "이름 서버 &2" -#: src/include/network/services/dns.rb:213 +#: src/include/network/services/dns.rb:213 msgid "Name Server &3" msgstr "이름 서버 &3" -#: src/include/network/services/dns.rb:217 +#: src/include/network/services/dns.rb:217 msgid "Hostname and Domain Name" msgstr "호스트 이름 및 도메인 이름" -#. global help, init, store for all dialog -#: src/include/network/services/dns.rb:234 +#. global help, init, store for all dialog +#: src/include/network/services/dns.rb:234 msgid "Name Servers and Domain Search List" msgstr "이름 서버 및 도메인 검색 목록" -#: src/include/network/services/dns.rb:251 +#: src/include/network/services/dns.rb:251 msgid "Hostname/DNS" msgstr "호스트 이름/DNS" -#. Init handler for DHCP_HOSTNAME -#: src/include/network/services/dns.rb:434 +#. Init handler for DHCP_HOSTNAME +#: src/include/network/services/dns.rb:434 msgid "keep current settings" msgstr "현재 설정 유지" -#. translators: no device selected placeholder -#: src/include/network/services/dns.rb:439 +#. translators: no device selected placeholder +#: src/include/network/services/dns.rb:439 msgid "no" msgstr "아니요" -#. translators: placeholder for "set hostname via any DHCP aware device" -#: src/include/network/services/dns.rb:441 +#. translators: placeholder for "set hostname via any DHCP aware device" +#: src/include/network/services/dns.rb:441 msgid "yes: any" msgstr "예: 모두" -#. translators: label is in form yes: <device name> -#: src/include/network/services/dns.rb:445 +#. translators: label is in form yes: <device name> +#: src/include/network/services/dns.rb:445 msgid "yes: %s" msgstr "예: %s" -#. Validator for domain name, no_popup -#. @param [String] key the widget being validated -#. @param [Hash] event the event being handled -#. @return whether valid -#: src/include/network/services/dns.rb:524 -msgid "" -"It's not recommended to use .local as domainname due to Multicast DNS. Use " -"it at your own risk?" -msgstr "" -"멀티캐스트 DNS 때문에 .local을 domainname으로 사용하지 않는 것이 좋습니다. 사" -"용하시겠습니까?" +#. Validator for domain name, no_popup +#. @param [String] key the widget being validated +#. @param [Hash] event the event being handled +#. @return whether valid +#: src/include/network/services/dns.rb:524 +msgid "It's not recommended to use .local as domainname due to Multicast DNS. Use it at your own risk?" +msgstr "멀티캐스트 DNS 때문에 .local을 domainname으로 사용하지 않는 것이 좋습니다. 사용하시겠습니까?" -#. Popup::Error text -#: src/include/network/services/dns.rb:542 +#. Popup::Error text +#: src/include/network/services/dns.rb:542 msgid "The search list can have at most %1 domains." msgstr "검색 목록에는 최대 %1개 도메인이 표시됩니다." -#. Popup::Error text -#: src/include/network/services/dns.rb:548 +#. Popup::Error text +#: src/include/network/services/dns.rb:548 msgid "The search list can have at most %1 characters." msgstr "검색 목록에는 최대 %1개 문자가 표시됩니다." -#. Popup::Error text -#: src/include/network/services/dns.rb:557 +#. Popup::Error text +#: src/include/network/services/dns.rb:557 msgid "The search domain '%1' is invalid." msgstr "'%1' 검색 도메인이 잘못되었습니다." -#. Standalone dialog only - embedded one is handled separately -#. via CWMTab -#: src/include/network/services/dns.rb:692 +#. Standalone dialog only - embedded one is handled separately +#. via CWMTab +#: src/include/network/services/dns.rb:692 msgid "Hostname and Name Server Configuration" msgstr "호스트 이름 및 이름 서버 구성" -#. Warning popup text 1/2 -#: src/include/network/services/host.rb:57 +#. Warning popup text 1/2 +#: src/include/network/services/host.rb:57 msgid "The host %1 is a system host." msgstr "호스트 %1은 시스탬 호스트 입니다." -#. Warning popup text 2/2 -#: src/include/network/services/host.rb:61 +#. Warning popup text 2/2 +#: src/include/network/services/host.rb:61 msgid "Really delete it?" msgstr "이 항목을 정말로 지웁니까?" -#. Warning popup text 2/2 -#: src/include/network/services/host.rb:64 +#. Warning popup text 2/2 +#: src/include/network/services/host.rb:64 msgid "Really change it?" msgstr "정말로 변경합니까?" -#. Hosts dialog help 1/2 -#: src/include/network/services/host.rb:78 +#. Hosts dialog help 1/2 +#: src/include/network/services/host.rb:78 msgid "<p>The hosts can be set up in this dialog.</p>" msgstr "<p>이 대화 상자에서 호스트를 설정할 수 있습니다.</p>" -#. Hosts dialog help 2/2 -#: src/include/network/services/host.rb:80 +#. Hosts dialog help 2/2 +#: src/include/network/services/host.rb:80 msgid "" "<p>Enter a host <b>IP Address</b>, a <b>Hostname</b>, and optional\n" "<b>Host Aliases</b>, separated by spaces.</p>\n" @@ -3802,111 +3637,110 @@ "<p>호스트 <b>IP 주소</b>, <b>호스트 이름</b> 및 선택적으로\n" "<b>호스트 별칭</b>을 쉼표로 구분하여 입력하십시오.</p>\n" -#. Frame label -#: src/include/network/services/host.rb:119 +#. Frame label +#: src/include/network/services/host.rb:119 msgid "Current Hosts" msgstr "현재 호스트" -#. Table header label -#: src/include/network/services/host.rb:131 +#. Table header label +#: src/include/network/services/host.rb:131 msgid "Hostnames" msgstr "호스트 이름" -#. Table header label -#: src/include/network/services/host.rb:133 +#. Table header label +#: src/include/network/services/host.rb:133 msgid "Host Aliases" msgstr "호스트 별칭" -#. TextEntry label -#: src/include/network/services/host.rb:336 +#. TextEntry label +#: src/include/network/services/host.rb:336 msgid "Hos&t Aliases" msgstr "호스트 별칭(&T)" -#. Popup::Error text -#: src/include/network/services/host.rb:399 +#. Popup::Error text +#: src/include/network/services/host.rb:399 msgid "Alias name \"%1\" is invalid." msgstr "별칭 이름\"%1\"은(는) 올바르지 않습니다." -#. ComboBox label -#: src/include/network/services/routing.rb:67 +#. ComboBox label +#: src/include/network/services/routing.rb:67 msgid "Default IPv4 &Gateway" msgstr "기본 IPv4 게이트웨이(&G)" -#: src/include/network/services/routing.rb:71 +#: src/include/network/services/routing.rb:71 msgid "Default IPv6 &Gateway" msgstr "기본 IPv6 게이트웨이(&G)" -#. Table header 3/4 -#: src/include/network/services/routing.rb:89 +#. Table header 3/4 +#: src/include/network/services/routing.rb:89 msgid "Genmask" msgstr "Genmask" -#. CheckBox label -#: src/include/network/services/routing.rb:110 +#. CheckBox label +#: src/include/network/services/routing.rb:110 msgid "Enable &IPv4 Forwarding" msgstr "IPv4 전달 활성화(&I)" -#: src/include/network/services/routing.rb:111 +#: src/include/network/services/routing.rb:111 msgid "Enable I&Pv6 Forwarding" msgstr "IPv6 전달 활성화(&P)" -#: src/include/network/services/routing.rb:136 +#: src/include/network/services/routing.rb:136 msgid "Routing" msgstr "라우팅" -#. Route edit dialog -#. @param [Fixnum] id id of the edited route -#. @param [Yast::Term] entry edited entry -#. @param [Array] devs available devices -#. @return route or nil, if canceled -#: src/include/network/services/routing.rb:163 +#. Route edit dialog +#. @param [Fixnum] id id of the edited route +#. @param [Yast::Term] entry edited entry +#. @param [Array] devs available devices +#. @return route or nil, if canceled +#: src/include/network/services/routing.rb:163 msgid "&Destination" msgstr "대상(&D)" -#: src/include/network/services/routing.rb:171 +#: src/include/network/services/routing.rb:171 msgid "Ge&nmask" msgstr "Genmask(&N)" -#: src/include/network/services/routing.rb:180 +#: src/include/network/services/routing.rb:180 msgid "&Gateway" msgstr "게이트웨이(&G)" -#: src/include/network/services/routing.rb:188 +#: src/include/network/services/routing.rb:188 msgid "De&vice" msgstr "장치(&V)" -#. Popup::Error text -#: src/include/network/services/routing.rb:247 +#. Popup::Error text +#: src/include/network/services/routing.rb:247 msgid "Destination is invalid." msgstr "대상이 잘못되었습니다." -#. Popup::Error text -#: src/include/network/services/routing.rb:255 +#. Popup::Error text +#: src/include/network/services/routing.rb:255 msgid "Gateway IP address is invalid." msgstr "게이트웨이 IP 주소가 잘못되었습니다." -#. Popup::Error text -#: src/include/network/services/routing.rb:263 +#. Popup::Error text +#: src/include/network/services/routing.rb:263 msgid "Subnetmask is invalid." msgstr "서브넷 마스크가 잘못되었습니다." -#. #178538 - disable routing dialog when NetworkManager is used -#. but instead of default route (#299448) - NM reads it -#: src/include/network/services/routing.rb:422 +#. #178538 - disable routing dialog when NetworkManager is used +#. but instead of default route (#299448) - NM reads it +#: src/include/network/services/routing.rb:422 msgid "The default gateway is invalid." msgstr "기본 게이트웨이가 잘못되었습니다." -#. TextEntry label -#: src/include/network/widgets.rb:54 +#. TextEntry label +#: src/include/network/widgets.rb:54 msgid "&Dial Prefix Regular Expression" msgstr "외부 회선 번호 정규식(&D)" -#. dial prefix regex help -#: src/include/network/widgets.rb:57 +#. dial prefix regex help +#: src/include/network/widgets.rb:57 msgid "" "<p>When <b>Dial Prefix Regular Expression</b> is set, users can\n" -"change the dial prefix in KInternet provided that it matches the " -"expression.\n" +"change the dial prefix in KInternet provided that it matches the expression.\n" "A recommended value is <tt>[09]?</tt>, allowing <tt>0</tt>, <tt>9</tt>,\n" "and the empty prefix. If the expression is empty, users are not allowed\n" "to change the prefix.</p>\n" @@ -3917,44 +3751,44 @@ " 사용할 수 있습니다. 표현식이 비어 있으면 사용자는 외부 회선 번호를\n" " 변경할 수 없습니다.</p>\n" -#. radio button group label,method of setup -#: src/include/network/widgets.rb:69 +#. radio button group label,method of setup +#: src/include/network/widgets.rb:69 msgid "Setup Method" msgstr "설정 방법" -#. radio button label -#: src/include/network/widgets.rb:75 +#. radio button label +#: src/include/network/widgets.rb:75 msgid "A&utomatic Address Setup (via DHCP)" msgstr "자동 주소 설정(DHCP를 통해)(&U)" -#. radio button label -#: src/include/network/widgets.rb:77 +#. radio button label +#: src/include/network/widgets.rb:77 msgid "S&tatic Address Setup" msgstr "고정 주소 설정(&T)" -#: src/include/network/widgets.rb:80 +#: src/include/network/widgets.rb:80 msgid "<p>H</p>" msgstr "<p>H</p>" -#. Combo box option for Device Activation -#: src/include/network/widgets.rb:95 +#. Combo box option for Device Activation +#: src/include/network/widgets.rb:95 msgid "At Boot Time" msgstr "부팅 시" -#. is a part of the static help text -#: src/include/network/widgets.rb:102 +#. is a part of the static help text +#: src/include/network/widgets.rb:102 msgid "Never" msgstr "안 함" -#. Combo box option for Device Activation -#. DO NOT TRANSLATE NetworkManager, it is a program name -#: src/include/network/widgets.rb:106 +#. Combo box option for Device Activation +#. DO NOT TRANSLATE NetworkManager, it is a program name +#: src/include/network/widgets.rb:106 msgid "By NetworkManager" msgstr "NetworkManager에 의해" -#. help text for Device Activation -#. DO NOT TRANSLATE NetworkManager, it is a program name -#: src/include/network/widgets.rb:111 +#. help text for Device Activation +#. DO NOT TRANSLATE NetworkManager, it is a program name +#: src/include/network/widgets.rb:111 msgid "" "<b>By NetworkManager</b>: a desktop applet\n" "controls the interface. There is no need to set it up in YaST." @@ -3962,13 +3796,13 @@ "<b>NetworkManager에 의해</b>: 데스크탑 애플릿으로\n" "인터페이스를 제어합니다. YaST에서는 설정할 필요가 없습니다." -#. Combo box option for Device Activation -#: src/include/network/widgets.rb:117 +#. Combo box option for Device Activation +#: src/include/network/widgets.rb:117 msgid "Manually" msgstr "수동" -#. help text for Device Activation -#: src/include/network/widgets.rb:119 +#. help text for Device Activation +#: src/include/network/widgets.rb:119 msgid "" "<p><b>Manually</b>: You control the interface manually\n" "via 'ifup' or 'qinternet' (see 'User Controlled' below).</p>\n" @@ -3976,13 +3810,13 @@ "<p><b>수동으로</b>: 'ifup' 또는 'qinternet'를 통해 수동으로\n" "인터페이스를 제어합니다(아래의 '사용자 제어' 참조).</p>\n" -#. Combo box option for Device Activation -#: src/include/network/widgets.rb:125 +#. Combo box option for Device Activation +#: src/include/network/widgets.rb:125 msgid "On Cable Connection" msgstr "케이블 연결로" -#. help text for Device Activation -#: src/include/network/widgets.rb:129 +#. help text for Device Activation +#: src/include/network/widgets.rb:129 msgid "" "<b>On Cable Connection</b>:\n" "The interface is watched for whether there is a physical\n" @@ -3994,13 +3828,13 @@ " 확인합니다. 케이블로 연결될 수도 있고 무선 인터페이스가\n" " 액세스 지점에 연결될 수도 있습니다.\n" -#. Combo box option for Device Activation -#: src/include/network/widgets.rb:138 +#. Combo box option for Device Activation +#: src/include/network/widgets.rb:138 msgid "On Hotplug" msgstr "핫플러그로" -#. help text for Device Activation -#: src/include/network/widgets.rb:140 +#. help text for Device Activation +#: src/include/network/widgets.rb:140 msgid "" "With <b>On Hotplug</b>,\n" "the interface is set up as soon as it is available. This is\n" @@ -4012,110 +3846,104 @@ " '부팅 시'와 거의 유사하지만, 인터페이스가 없더라도 부팅 시 오류가\n" " 발생하지 않습니다.\n" -#. Combo box option for Device Activation -#: src/include/network/widgets.rb:149 +#. Combo box option for Device Activation +#: src/include/network/widgets.rb:149 msgid "On NFSroot" msgstr "NFSroot에서" -#. help text for Device Activation -#: src/include/network/widgets.rb:151 +#. help text for Device Activation +#: src/include/network/widgets.rb:151 msgid "" -"Using <b>On NFSroot</b> is similar to <tt>auto</tt>. Interfaces with this " -"startmode will never\n" -"be shut down via <tt>rcnetwork stop</tt>. <tt>ifdown <iface></tt> is still " -"available.\n" +"Using <b>On NFSroot</b> is similar to <tt>auto</tt>. Interfaces with this startmode will never\n" +"be shut down via <tt>rcnetwork stop</tt>. <tt>ifdown <iface></tt> is still available.\n" "Use this if you have an NFS or iSCSI root filesystem.\n" msgstr "" -"<b>NFSroot</b> 사용은 <tt>auto</tt>와 유사합니다. 그러나 이 시작 모드의 인터" -"페이스는 \n" -"<tt>rcnetwork stop</tt>을 통해 종료할 수 없습니다. <tt>ifdown<iface></tt>은 " -"계속 사용 가능합니다.\n" +"<b>NFSroot</b> 사용은 <tt>auto</tt>와 유사합니다. 그러나 이 시작 모드의 인터페이스는 \n" +"<tt>rcnetwork stop</tt>을 통해 종료할 수 없습니다. <tt>ifdown<iface></tt>은 계속 사용 가능합니다.\n" "nfs 또는 iSCSI 루트 파일 시스템을 가진 경우에는 이것을 사용하십시오.\n" -#. Combo box label - when to activate device (e.g. on boot, manually, never,..) -#: src/include/network/widgets.rb:184 +#. Combo box label - when to activate device (e.g. on boot, manually, never,..) +#: src/include/network/widgets.rb:184 msgid "Activate &Device" msgstr "장치 활성화(&D)" -#. Device activation main help. The individual parts will be -#. substituted as %1 -#: src/include/network/widgets.rb:190 +#. Device activation main help. The individual parts will be +#. substituted as %1 +#: src/include/network/widgets.rb:190 msgid "" "<p><b><big>Device Activation</big></b></p> \n" -"<p>Choose when to bring up the network interface. <b>At Boot Time</b> " -"activates it during system boot, \n" +"<p>Choose when to bring up the network interface. <b>At Boot Time</b> activates it during system boot, \n" "<b>Never</b> does not start the device.\n" "%1</p>\n" msgstr "" "<p><b><big>장치 활성화</big></b></p> \n" -"<p>네트워크 인터페이스가 활성화될 시기를 선택할 수 있습니다. <b>부팅 시</b>" -"를 선택하면 시스템이\n" +"<p>네트워크 인터페이스가 활성화될 시기를 선택할 수 있습니다. <b>부팅 시</b>를 선택하면 시스템이\n" "부팅하는 동안 시작됩니다. <b>안 함</b>을 선택하면 장치가 시작되지 않습니다.\n" "%1</p>\n" -#: src/include/network/widgets.rb:235 +#: src/include/network/widgets.rb:235 msgid "IPoIB Device Mode" msgstr "IPoIB 장치 모드" -#: src/include/network/widgets.rb:246 +#: src/include/network/widgets.rb:246 msgid "Firewall is not installed." msgstr "방화벽이 설치되어 있지 않습니다." -#. translators: MTU value description (size in bytes, desc) -#: src/include/network/widgets.rb:253 +#. translators: MTU value description (size in bytes, desc) +#: src/include/network/widgets.rb:253 msgid "1500 (Ethernet, DSL broadband)" msgstr "1500(이더넷, DSL 광대역)" -#: src/include/network/widgets.rb:254 +#: src/include/network/widgets.rb:254 msgid "1492 (PPPoE broadband)" msgstr "1492(PPPoE 광대역)" -#: src/include/network/widgets.rb:255 +#: src/include/network/widgets.rb:255 msgid "576 (dial-up)" msgstr "576(전화 접속)" -#. translators: MTU value description (size in bytes, desc) -#: src/include/network/widgets.rb:262 +#. translators: MTU value description (size in bytes, desc) +#: src/include/network/widgets.rb:262 msgid "65520 (IPoIB in connected mode)" msgstr "65520(연결된 모드의 IPoIB)" -#: src/include/network/widgets.rb:263 +#: src/include/network/widgets.rb:263 msgid "2044 (IPoIB in datagram mode)" msgstr "2044(데이터그램 모드의 IPoIB)" -#. textentry label, Maximum Transfer Unit -#: src/include/network/widgets.rb:271 +#. textentry label, Maximum Transfer Unit +#: src/include/network/widgets.rb:271 msgid "Set &MTU" msgstr "MTU 설정(&M)" -#. the user can control the network with the NetworkManager program -#: src/include/network/widgets.rb:287 +#. the user can control the network with the NetworkManager program +#: src/include/network/widgets.rb:287 msgid "NetworkManager Service" msgstr "NetworkManager 서비스" -#. ifup is a program name -#: src/include/network/widgets.rb:295 +#. ifup is a program name +#: src/include/network/widgets.rb:295 msgid "Traditional ifup" msgstr "기존 ifup" -#. wicked is network configuration backend like netconfig -#: src/include/network/widgets.rb:303 +#. wicked is network configuration backend like netconfig +#: src/include/network/widgets.rb:303 msgid "Wicked Service" msgstr "Wicked 서비스" -#. used when no network service is active or to disable network service -#: src/include/network/widgets.rb:311 +#. used when no network service is active or to disable network service +#: src/include/network/widgets.rb:311 msgid "Network Services Disabled" msgstr "네트워크 서비스 비활성화" -#. Store the NetworkManager widget -#. @param [String] key id of the widget -#. @param [Hash] event the event being handled -#: src/include/network/widgets.rb:342 +#. Store the NetworkManager widget +#. @param [String] key id of the widget +#. @param [Hash] event the event being handled +#: src/include/network/widgets.rb:342 msgid "Applet needed" msgstr "애플릿 필요" -#: src/include/network/widgets.rb:343 +#: src/include/network/widgets.rb:343 msgid "" "NetworkManager is controlled by desktop applet\n" "(KDE plasma widget and nm-applet for GNOME).\n" @@ -4125,34 +3953,34 @@ "(GNOME용 nm-applet 및 KDE 플라즈마 위젯)에 의해 제어됩니다.\n" "실행 중인지 확인하고, 실행 중이 아닌 경우 수동으로 시작하십시오." -#: src/include/network/widgets.rb:359 +#: src/include/network/widgets.rb:359 msgid "General Network Settings" msgstr "일반 네트워크 설정" -#: src/include/network/widgets.rb:403 +#: src/include/network/widgets.rb:403 msgid "IPv6 Protocol Settings" msgstr "IPv6 프로토콜 설정" -#: src/include/network/widgets.rb:404 +#: src/include/network/widgets.rb:404 msgid "Enable IPv6" msgstr "IPv6 활성화" -#. TRANSLATORS: Informs that device name is not known -#: src/include/network/widgets.rb:421 +#. TRANSLATORS: Informs that device name is not known +#: src/include/network/widgets.rb:421 msgid "Unknown device" msgstr "알수 없는 장치" -#. TRANSLATORS: Part of label, device with IP address assigned by DHCP -#: src/include/network/widgets.rb:430 +#. TRANSLATORS: Part of label, device with IP address assigned by DHCP +#: src/include/network/widgets.rb:430 msgid "DHCP address" msgstr "DHCP 주소" -#. TRANSLATORS: Informs that no IP has been assigned to the device -#: src/include/network/widgets.rb:437 +#. TRANSLATORS: Informs that no IP has been assigned to the device +#: src/include/network/widgets.rb:437 msgid "No IP address assigned" msgstr "할당된 IP 주소 없음" -#: src/include/network/widgets.rb:440 +#: src/include/network/widgets.rb:440 msgid "" "%1 \n" "%2 - %3" @@ -4160,202 +3988,198 @@ "%1 \n" "%2 - %3" -#. #186102 -#: src/include/network/widgets.rb:493 +#. #186102 +#: src/include/network/widgets.rb:493 msgid "&Change Device" msgstr "장치 변경(&C)" -#. popup dialog title -#: src/include/network/widgets.rb:526 +#. popup dialog title +#: src/include/network/widgets.rb:526 msgid "Network Device Select" msgstr "네트워크 장치 선택" -#. this conditions origin from bridge configuration -#. if enslaving a configured device then its configuration is rewritten -#. to "0.0.0.0/32" -#. -#. translators: a note that listed device is already configured -#: src/include/network/widgets.rb:572 +#. this conditions origin from bridge configuration +#. if enslaving a configured device then its configuration is rewritten +#. to "0.0.0.0/32" +#. +#. translators: a note that listed device is already configured +#: src/include/network/widgets.rb:572 msgid "configured" msgstr "구성됨" -#. Shows a confirmation timed dialogue -#. -#. Returns :ok when user agreed, :cancel otherwise -#: src/lib/network/confirm_virt_proposal.rb:23 +#. Shows a confirmation timed dialogue +#. +#. Returns :ok when user agreed, :cancel otherwise +#: src/lib/network/confirm_virt_proposal.rb:23 msgid "Confirm Network Restart" msgstr "네트워크 다시 시작 확인" -#: src/lib/network/confirm_virt_proposal.rb:24 -msgid "" -"Because of the bridged network, YaST2 needs to restart the network to apply " -"the settings." -msgstr "" -"브리지 네트워크 때문에 YaST2에서 설정을 적용하려면 네트워크를 다시 시작해야 " -"합니다." +#: src/lib/network/confirm_virt_proposal.rb:24 +msgid "Because of the bridged network, YaST2 needs to restart the network to apply the settings." +msgstr "브리지 네트워크 때문에 YaST2에서 설정을 적용하려면 네트워크를 다시 시작해야 합니다." -#. Opens dialog for editing NIC name -#: src/lib/network/edit_nic_name.rb:86 +#. Opens dialog for editing NIC name +#: src/lib/network/edit_nic_name.rb:86 msgid "Device Name:" msgstr "장치 이름:" -#: src/lib/network/edit_nic_name.rb:92 +#: src/lib/network/edit_nic_name.rb:92 msgid "Base Udev Rule On" msgstr "Udev 규칙의 기초" -#. make sure there is enough space (#367239) -#: src/lib/network/edit_nic_name.rb:101 +#. make sure there is enough space (#367239) +#: src/lib/network/edit_nic_name.rb:101 msgid "MAC address: %s" msgstr "MAC 주소: %s" -#: src/lib/network/edit_nic_name.rb:107 +#: src/lib/network/edit_nic_name.rb:107 msgid "BusID: %s" msgstr "BusID: %s" -#. check if the name is assigned to another device already -#: src/lib/network/edit_nic_name.rb:144 +#. check if the name is assigned to another device already +#: src/lib/network/edit_nic_name.rb:144 msgid "Configuration name already exists." msgstr "구성 이름이 이미 존재합니다." -#: src/lib/network/edit_nic_name.rb:148 +#: src/lib/network/edit_nic_name.rb:148 msgid "Invalid configuration name." msgstr "잘못된 구성 이름입니다." -#. Progress stage 1 -#: src/modules/DNS.rb:377 +#. Progress stage 1 +#: src/modules/DNS.rb:377 msgid "Write hostname" msgstr "호스트 이름 쓰기" -#. Progress stage 2 -#. Progress stage 10 -#: src/modules/DNS.rb:379 src/modules/Lan.rb:518 +#. Progress stage 2 +#. Progress stage 10 +#: src/modules/DNS.rb:379 src/modules/Lan.rb:518 msgid "Update configuration" msgstr "설정 업데이트" -#. Progress stage 3 -#: src/modules/DNS.rb:381 +#. Progress stage 3 +#: src/modules/DNS.rb:381 msgid "Update /etc/resolv.conf" msgstr "/etc/resolv.conf 업데이트" -#. Write dialog caption -#: src/modules/DNS.rb:385 +#. Write dialog caption +#: src/modules/DNS.rb:385 msgid "Saving Hostname and DNS Configuration" msgstr "호스트 이름 및 DNS 구성 저장 중..." -#. Allow to set hostname even if it's modified by DHCP (#13427) -#. if(NetworkConfig::DHCP["DHCLIENT_SET_HOSTNAME"]:false != true) { -#. Progress step 1/3 -#: src/modules/DNS.rb:394 +#. Allow to set hostname even if it's modified by DHCP (#13427) +#. if(NetworkConfig::DHCP["DHCLIENT_SET_HOSTNAME"]:false != true) { +#. Progress step 1/3 +#: src/modules/DNS.rb:394 msgid "Writing hostname..." msgstr "호스트 이름을 쓰는 중..." -#. Progress step 2/3 -#. Progress step 10 -#: src/modules/DNS.rb:411 src/modules/Lan.rb:606 +#. Progress step 2/3 +#. Progress step 10 +#: src/modules/DNS.rb:411 src/modules/Lan.rb:606 msgid "Updating configuration..." msgstr "구성 업데이트 중..." -#. if(SCR::Read(.target.size, resolv_conf) < 0) -#. SCR::Write(.target.string, resolv_conf, ""); -#. Progress step 3/3 -#: src/modules/DNS.rb:421 +#. if(SCR::Read(.target.size, resolv_conf) < 0) +#. SCR::Write(.target.string, resolv_conf, ""); +#. Progress step 3/3 +#: src/modules/DNS.rb:421 msgid "Updating /etc/resolv.conf ..." msgstr "/etc/resolv.conf 업데이트 중..." -#. Summary text -#: src/modules/DNS.rb:543 +#. Summary text +#: src/modules/DNS.rb:543 msgid "Hostname: Set by DHCP" msgstr "호스트 이름: DHCP에 의해 설정됨" -#. Summary text -#: src/modules/DNS.rb:549 +#. Summary text +#: src/modules/DNS.rb:549 msgid "Hostname: %1" msgstr "호스트 이름: %1" -#: src/modules/DNS.rb:557 +#: src/modules/DNS.rb:557 msgid "Hostname will not be written to /etc/hosts" msgstr "/etc/hosts에 호스트 이름이 기록되지 않습니다." -#. Summary text -#: src/modules/DNS.rb:578 +#. Summary text +#: src/modules/DNS.rb:578 msgid "Name Servers: %1" msgstr "이름 서버들: %1" -#. Summary text -#: src/modules/DNS.rb:588 +#. Summary text +#: src/modules/DNS.rb:588 msgid "Search List: %1" msgstr "검색 대상: %1" -#. Check if there is anything to do -#: src/modules/Host.rb:144 +#. Check if there is anything to do +#: src/modules/Host.rb:144 msgid "Update /etc/hosts" msgstr "/etc/hosts 업데이트" -#: src/modules/Host.rb:146 +#: src/modules/Host.rb:146 msgid "Saving Hostname Configuration" msgstr "호스트 이름 구성 저장 중" -#: src/modules/Host.rb:150 +#: src/modules/Host.rb:150 msgid "Updating /etc/hosts ..." msgstr "/etc/hosts 업데이트 중..." -#. Read dialog caption -#: src/modules/Lan.rb:254 +#. Read dialog caption +#: src/modules/Lan.rb:254 msgid "Initializing Network Configuration" msgstr "네트워크 구성 초기화" -#. Progress stage 1/9 -#: src/modules/Lan.rb:267 +#. Progress stage 1/9 +#: src/modules/Lan.rb:267 msgid "Detect network devices" msgstr "네트워크 장치 검색" -#. Progress stage 2/9 -#: src/modules/Lan.rb:269 +#. Progress stage 2/9 +#: src/modules/Lan.rb:269 msgid "Read driver information" msgstr "드라이버 정보 읽기" -#. Progress stage 3/9 - multiple devices may be present, really plural -#: src/modules/Lan.rb:271 +#. Progress stage 3/9 - multiple devices may be present, really plural +#: src/modules/Lan.rb:271 msgid "Read device configuration" msgstr "장치 구성 읽기" -#. Progress stage 4/9 -#: src/modules/Lan.rb:273 +#. Progress stage 4/9 +#: src/modules/Lan.rb:273 msgid "Read network configuration" msgstr "네트워크 구성 읽기" -#. Progress stage 5/9 -#: src/modules/Lan.rb:275 +#. Progress stage 5/9 +#: src/modules/Lan.rb:275 msgid "Read firewall settings" msgstr "방화벽 구성 읽기" -#. Progress stage 6/9 -#: src/modules/Lan.rb:277 +#. Progress stage 6/9 +#: src/modules/Lan.rb:277 msgid "Read hostname and DNS configuration" msgstr "호스트 이름 및 DNS 구성 읽기" -#. Progress stage 7/9 -#: src/modules/Lan.rb:279 +#. Progress stage 7/9 +#: src/modules/Lan.rb:279 msgid "Read installation information" msgstr "설치 정보 읽기" -#. Progress stage 8/9 -#: src/modules/Lan.rb:281 +#. Progress stage 8/9 +#: src/modules/Lan.rb:281 msgid "Read routing configuration" msgstr "라우팅 구성 읽기" -#. Progress stage 9/9 -#: src/modules/Lan.rb:283 +#. Progress stage 9/9 +#: src/modules/Lan.rb:283 msgid "Detect current status" msgstr "현재 상태 검색" -#. Progress step 1/9 -#: src/modules/Lan.rb:297 +#. Progress step 1/9 +#: src/modules/Lan.rb:297 msgid "Detecting ndiswrapper..." msgstr "ndiswrapper를 검색하는 중입니다." -#. modprobe ndiswrapper before hwinfo when needed (#343893) -#: src/modules/Lan.rb:316 +#. modprobe ndiswrapper before hwinfo when needed (#343893) +#: src/modules/Lan.rb:316 msgid "" "Detected a ndiswrapper configuration,\n" "but the kernel module was not modprobed.\n" @@ -4365,7 +4189,7 @@ "커널 모듈이 modprobe되지 않았습니다.\n" "ndiswrapper를 modprobe하시겠습니까?\n" -#: src/modules/Lan.rb:324 +#: src/modules/Lan.rb:324 msgid "" "ndiswrapper kernel module has not been loaded.\n" "Check configuration manually.\n" @@ -4373,287 +4197,281 @@ "ndiswrapper 커널 모듈이 로드되지 않았습니다.\n" "수동으로 구성을 확인하십시오.\n" -#. Progress step 2/9 -#: src/modules/Lan.rb:338 +#. Progress step 2/9 +#: src/modules/Lan.rb:338 msgid "Detecting network devices..." msgstr "네트워크 장치검색 중…" -#. Progress step 3/9 - multiple devices may be present, really plural -#: src/modules/Lan.rb:346 +#. Progress step 3/9 - multiple devices may be present, really plural +#: src/modules/Lan.rb:346 msgid "Reading device configuration..." msgstr "장치 설정 불어오는 중..." -#. Progress step 4/9 -#: src/modules/Lan.rb:353 +#. Progress step 4/9 +#: src/modules/Lan.rb:353 msgid "Reading network configuration..." msgstr "네트워크 설정 불러오는 중..." -#. Progress step 5/9 -#: src/modules/Lan.rb:362 +#. Progress step 5/9 +#: src/modules/Lan.rb:362 msgid "Reading firewall settings..." msgstr "방화벽 설정 불러오는 중..." -#. Progress step 6/9 -#: src/modules/Lan.rb:370 +#. Progress step 6/9 +#: src/modules/Lan.rb:370 msgid "Reading hostname and DNS configuration..." msgstr "호스트 이름 및 DNS 구성 읽는 중..." -#. Progress step 7/9 -#: src/modules/Lan.rb:377 +#. Progress step 7/9 +#: src/modules/Lan.rb:377 msgid "Reading installation information..." msgstr "설치 정보 불러오는 중..." -#. Progress step 8/9 -#: src/modules/Lan.rb:383 +#. Progress step 8/9 +#: src/modules/Lan.rb:383 msgid "Reading routing configuration..." msgstr "라우팅 설정 불러오는 중..." -#. Progress step 9/9 -#: src/modules/Lan.rb:389 +#. Progress step 9/9 +#: src/modules/Lan.rb:389 msgid "Detecting current status..." msgstr "현재 상태 검색중..." -#. Final progress step -#. Final progress step -#: src/modules/Lan.rb:395 src/modules/Lan.rb:627 +#. Final progress step +#. Final progress step +#: src/modules/Lan.rb:395 src/modules/Lan.rb:627 msgid "Finished" msgstr "완료" -#. (a specialization used when a parameterless function is needed) -#. @return Read(`cache) -#: src/modules/Lan.rb:422 +#. (a specialization used when a parameterless function is needed) +#. @return Read(`cache) +#: src/modules/Lan.rb:422 msgid "To apply this change, a reboot is needed." msgstr "이 변경사항을 적용하려면 재부팅해야 합니다." -#. Write dialog caption -#: src/modules/Lan.rb:490 +#. Write dialog caption +#: src/modules/Lan.rb:490 msgid "Saving Network Configuration" msgstr "네트워크 구성 저장" -#. Progress stage 2 -#: src/modules/Lan.rb:497 +#. Progress stage 2 +#: src/modules/Lan.rb:497 msgid "Write drivers information" msgstr "드라이버 정보 저장" -#. Progress stage 3 - multiple devices may be present,really plural -#: src/modules/Lan.rb:499 +#. Progress stage 3 - multiple devices may be present,really plural +#: src/modules/Lan.rb:499 msgid "Write device configuration" msgstr "장치 설정 쓰기" -#. Progress stage 4 -#: src/modules/Lan.rb:501 +#. Progress stage 4 +#: src/modules/Lan.rb:501 msgid "Write network configuration" msgstr "네트워크 설정 쓰기" -#. Progress stage 5 -#: src/modules/Lan.rb:503 +#. Progress stage 5 +#: src/modules/Lan.rb:503 msgid "Write routing configuration" msgstr "라우팅 설정 저장" -#. Progress stage 6 -#: src/modules/Lan.rb:505 +#. Progress stage 6 +#: src/modules/Lan.rb:505 msgid "Write hostname and DNS configuration" msgstr "호스트 이름 및 DNS 구성 쓰기" -#. Progress stage 7 -#: src/modules/Lan.rb:507 +#. Progress stage 7 +#: src/modules/Lan.rb:507 msgid "Set up network services" msgstr "네트워크 서비스 설정" -#. Progress stage 8 -#. Progress stage 1 -#: src/modules/Lan.rb:511 src/modules/Remote.rb:201 +#. Progress stage 8 +#. Progress stage 1 +#: src/modules/Lan.rb:511 src/modules/Remote.rb:201 msgid "Write firewall settings" msgstr "방화벽 설정 저장" -#. Progress stage 9 -#: src/modules/Lan.rb:515 +#. Progress stage 9 +#: src/modules/Lan.rb:515 msgid "Activate network services" msgstr "네트워크 서비스 활성화" -#. Progress step 2 -#: src/modules/Lan.rb:531 +#. Progress step 2 +#: src/modules/Lan.rb:531 msgid "Writing /etc/modprobe.conf..." msgstr "/etc/modprobe.conf를 쓰는 중..." -#. Progress step 3 - multiple devices may be present, really plural -#: src/modules/Lan.rb:536 +#. Progress step 3 - multiple devices may be present, really plural +#: src/modules/Lan.rb:536 msgid "Writing device configuration..." msgstr "장치 설정 쓰기중..." -#. Progress step 4 -#: src/modules/Lan.rb:542 +#. Progress step 4 +#: src/modules/Lan.rb:542 msgid "Writing network configuration..." msgstr "네트워크 설정 쓰기중..." -#. Progress step 5 -#: src/modules/Lan.rb:548 +#. Progress step 5 +#: src/modules/Lan.rb:548 msgid "Writing routing configuration..." msgstr "라우팅 설정 저장중..." -#. Progress step 6 -#: src/modules/Lan.rb:556 +#. Progress step 6 +#: src/modules/Lan.rb:556 msgid "Writing hostname and DNS configuration..." msgstr "호스트 이름 및 DNS 구성 쓰는 중..." -#. Progress step 7 -#: src/modules/Lan.rb:569 +#. Progress step 7 +#: src/modules/Lan.rb:569 msgid "Setting up network services..." msgstr "네트워크 서비스 설정 중..." -#. Progress step 8 -#: src/modules/Lan.rb:577 src/modules/Remote.rb:215 +#. Progress step 8 +#: src/modules/Lan.rb:577 src/modules/Remote.rb:215 msgid "Writing firewall settings..." msgstr "방화벽 설정 저장 중..." -#. Progress step 9 -#: src/modules/Lan.rb:587 +#. Progress step 9 +#: src/modules/Lan.rb:587 msgid "Activating network services..." msgstr "네트워크 서비스 활성화중..." -#: src/modules/Lan.rb:623 +#: src/modules/Lan.rb:623 msgid "No network running" msgstr "실행 중인 네트워크 없음" -#. header for network summary list -#: src/modules/Lan.rb:732 +#. header for network summary list +#: src/modules/Lan.rb:732 msgid "Network Mode" msgstr "네트워크 모드" -#. network mode: the interfaces are controlled by the user -#: src/modules/Lan.rb:737 +#. network mode: the interfaces are controlled by the user +#: src/modules/Lan.rb:737 msgid "Interfaces controlled by NetworkManager" msgstr "NetworkManager에서 제어되는 인터페이스" -#. switch from network manager to wicked -#: src/modules/Lan.rb:739 +#. switch from network manager to wicked +#: src/modules/Lan.rb:739 msgid "switch to Wicked" msgstr "Wicked로 전환" -#. network mode -#: src/modules/Lan.rb:743 +#. network mode +#: src/modules/Lan.rb:743 msgid "Traditional network setup with Wicked" msgstr "Wicked를 사용한 기존 네트워크 설정" -#. switch from wicked to network manager -#: src/modules/Lan.rb:745 +#. switch from wicked to network manager +#: src/modules/Lan.rb:745 msgid "switch to NetworkManager" msgstr "NetworkManager로 전환" -#. ipv6 support is enabled -#: src/modules/Lan.rb:751 +#. ipv6 support is enabled +#: src/modules/Lan.rb:751 msgid "Support for IPv6 protocol is enabled" msgstr "IPv6 프로토콜 지원이 활성화됨" -#. disable ipv6 support -#: src/modules/Lan.rb:753 +#. disable ipv6 support +#: src/modules/Lan.rb:753 msgid "disable" msgstr "비활성화" -#. ipv6 support is disabled -#: src/modules/Lan.rb:757 +#. ipv6 support is disabled +#: src/modules/Lan.rb:757 msgid "Support for IPv6 protocol is disabled" msgstr "IPv6 프로토콜 지원이 비활성화됨" -#. enable ipv6 support -#: src/modules/Lan.rb:759 +#. enable ipv6 support +#: src/modules/Lan.rb:759 msgid "enable" msgstr "활성화" -#. translators: a possible value for: IPoIB device mode -#: src/modules/LanItems.rb:202 +#. translators: a possible value for: IPoIB device mode +#: src/modules/LanItems.rb:202 msgid "connected" msgstr "연결됨" -#: src/modules/LanItems.rb:203 +#: src/modules/LanItems.rb:203 msgid "datagram" msgstr "데이터그램" -#. summary description of STARTMODE=auto -#. summary description of STARTMODE=auto -#. summary description of STARTMODE=hotplug -#: src/modules/LanItems.rb:1339 src/modules/LanItems.rb:1343 -#: src/modules/LanItems.rb:1347 +#. summary description of STARTMODE=auto +#. summary description of STARTMODE=auto +#. summary description of STARTMODE=hotplug +#: src/modules/LanItems.rb:1339 src/modules/LanItems.rb:1343 +#: src/modules/LanItems.rb:1347 msgid "Started automatically at boot" msgstr "부팅 시 자동으로 시작됨" -#. summary description of STARTMODE=ifplugd -#: src/modules/LanItems.rb:1351 +#. summary description of STARTMODE=ifplugd +#: src/modules/LanItems.rb:1351 msgid "Started automatically on cable connection" msgstr "케이블 연결 시 자동으로 시작됨" -#. summary description of STARTMODE=managed -#: src/modules/LanItems.rb:1355 +#. summary description of STARTMODE=managed +#: src/modules/LanItems.rb:1355 msgid "Managed by NetworkManager" msgstr "NetworkManager에 의해 관리됨" -#. summary description of STARTMODE=off -#: src/modules/LanItems.rb:1359 +#. summary description of STARTMODE=off +#: src/modules/LanItems.rb:1359 msgid "Will not be started at all" msgstr "전혀 시작되지 않습니다." -#: src/modules/LanItems.rb:1365 +#: src/modules/LanItems.rb:1365 msgid "Started manually" msgstr "수동으로 시작됨" -#. Creates details for device's overview based on ip configuration type -#. -#. Produces list of strings. Strings are intended for "bullet" list, e.g.: -#. * <string1> -#. * <string2> -#. -#. @param [Hash] dev_map a device's sysconfig map (in form "option" => "value") -#. @return [Array] list of strings, one string is intended for one "bullet" -#: src/modules/LanItems.rb:1395 +#. Creates details for device's overview based on ip configuration type +#. +#. Produces list of strings. Strings are intended for "bullet" list, e.g.: +#. * <string1> +#. * <string2> +#. +#. @param [Hash] dev_map a device's sysconfig map (in form "option" => "value") +#. @return [Array] list of strings, one string is intended for one "bullet" +#: src/modules/LanItems.rb:1395 msgid "IP address assigned using" msgstr "할당된 IP 주소 사용 중" -#: src/modules/LanItems.rb:1399 +#: src/modules/LanItems.rb:1399 msgid "IP address: %s/%s" msgstr "IP 주소: %s/%s" -#: src/modules/LanItems.rb:1402 +#: src/modules/LanItems.rb:1402 msgid "IP address: %s, subnet mask %s" msgstr "IP 주소: %s, 서브넷 마스크 %s" -#. FIXME: side effect: sets @type. No reason for that. It should only build item -#. overview. Check and remove. -#. display it only if we need it, don't duplicate "ifcfg_name" above -#: src/modules/LanItems.rb:1446 src/modules/LanItems.rb:1502 +#. FIXME: side effect: sets @type. No reason for that. It should only build item +#. overview. Check and remove. +#. display it only if we need it, don't duplicate "ifcfg_name" above +#: src/modules/LanItems.rb:1446 src/modules/LanItems.rb:1502 msgid "Device Name: %s" msgstr "장치 이름: %s" -#: src/modules/LanItems.rb:1471 +#: src/modules/LanItems.rb:1471 msgid "Bonding master" msgstr "결합 마스터" -#: src/modules/LanItems.rb:1474 +#: src/modules/LanItems.rb:1474 msgid "Bridge" msgstr "브리지" -#: src/modules/LanItems.rb:1476 +#: src/modules/LanItems.rb:1476 msgid "enslaved in %s" msgstr "%s에 슬레이브됨" -#: src/modules/LanItems.rb:1490 +#: src/modules/LanItems.rb:1490 msgid "Not connected" msgstr "연결되지 않음" -#: src/modules/LanItems.rb:1491 +#: src/modules/LanItems.rb:1491 msgid "No hwinfo" msgstr "hwinfo 없음" -#: src/modules/LanItems.rb:1508 -msgid "" -"Unable to configure the network card because the kernel device (eth0, wlan0) " -"is not present. This is mostly caused by missing firmware (for wlan " -"devices). See dmesg output for details." -msgstr "" -"커널 장치(eth0, wlan0)가 없으므로 네트워크 카드를 구성할 수 없습니다. 대체로 " -"누락된 펌웨어(wlan 장치)에 의해 발생합니다. 자세한 내용은 dmesg 출력을 참조하" -"십시오." +#: src/modules/LanItems.rb:1508 +msgid "Unable to configure the network card because the kernel device (eth0, wlan0) is not present. This is mostly caused by missing firmware (for wlan devices). See dmesg output for details." +msgstr "커널 장치(eth0, wlan0)가 없으므로 네트워크 카드를 구성할 수 없습니다. 대체로 누락된 펌웨어(wlan 장치)에 의해 발생합니다. 자세한 내용은 dmesg 출력을 참조하십시오." -#: src/modules/LanItems.rb:1514 +#: src/modules/LanItems.rb:1514 msgid "" "The device is not configured. Press <b>Edit</b>\n" "to configure.\n" @@ -4661,31 +4479,31 @@ "장치가 구성되지 않았습니다. <b>편집</b>을\n" "눌러 구성하십시오.\n" -#: src/modules/LanItems.rb:1521 +#: src/modules/LanItems.rb:1521 msgid "Needed firmware" msgstr "펌웨어 필요" -#: src/modules/LanItems.rb:1521 +#: src/modules/LanItems.rb:1521 msgid "unknown" msgstr "알수없음" -#. Returns a formated string with the interfaces that are part of a bridge -#. or of a bond interface. -#. -#. @param [String] ifcfg_type -#. @param [String] ifcfg_name -#. @return [String] formated string with the interface type and the interfaces enslaved -#: src/modules/LanItems.rb:2547 +#. Returns a formated string with the interfaces that are part of a bridge +#. or of a bond interface. +#. +#. @param [String] ifcfg_type +#. @param [String] ifcfg_name +#. @return [String] formated string with the interface type and the interfaces enslaved +#: src/modules/LanItems.rb:2547 msgid "Bonding slaves" msgstr "슬레이브를 결합하는 중" -#: src/modules/LanItems.rb:2550 +#: src/modules/LanItems.rb:2550 msgid "Bridge Ports" msgstr "브리지 포트" -#. Package containing SuSEfirewall2 services has to be installed before -#. reading SuSEFirewall, otherwise exception is thrown by firewall -#: src/modules/Remote.rb:158 +#. Package containing SuSEfirewall2 services has to be installed before +#. reading SuSEFirewall, otherwise exception is thrown by firewall +#: src/modules/Remote.rb:158 msgid "" "Package %{package} is not installed\n" "firewall settings will be disabled." @@ -4693,39 +4511,39 @@ "%{package} 패키지가 설치되지 않았습니다.\n" "방화벽 설정이 비활성화됩니다." -#. Progress stage 2 -#: src/modules/Remote.rb:203 +#. Progress stage 2 +#: src/modules/Remote.rb:203 msgid "Configure display manager" msgstr "디스플레이 관리자 구성" -#. Progress stage 3 -#: src/modules/Remote.rb:208 +#. Progress stage 3 +#: src/modules/Remote.rb:208 msgid "Restart the services" msgstr "서비스 재시작" -#: src/modules/Remote.rb:211 +#: src/modules/Remote.rb:211 msgid "Saving Remote Administration Configuration" msgstr "원격 관리 구성 저장 중" -#: src/modules/Remote.rb:220 +#: src/modules/Remote.rb:220 msgid "Configuring display manager..." msgstr "디스플레이 관리자 구성 중..." -#: src/modules/Remote.rb:224 +#: src/modules/Remote.rb:224 msgid "Restarting the service..." msgstr "서비스 재시작 중..." -#. Install required packages -#: src/modules/Remote.rb:261 +#. Install required packages +#: src/modules/Remote.rb:261 msgid "Enabling service %{service} has failed" msgstr "%{service} 서비스를 활성화하지 못했습니다." -#: src/modules/Remote.rb:267 +#: src/modules/Remote.rb:267 msgid "Disabling service %{service} has failed" msgstr "%{service} 서비스를 비활성화하지 못했습니다." -#. Do this only if package xinetd is installed (#256385) -#: src/modules/Remote.rb:295 +#. Do this only if package xinetd is installed (#256385) +#: src/modules/Remote.rb:295 msgid "" "Your display manager must be restarted.\n" "To take the changes in remote administration into account, \n" @@ -4735,69 +4553,69 @@ "원격 관리에서의 변경 사항을 고려하려면, \n" "수동으로 재시작하거나 로그아웃 후 다시 로그인하십시오." -#. description in proposal -#: src/modules/Remote.rb:332 +#. description in proposal +#: src/modules/Remote.rb:332 msgid "Remote administration is enabled." msgstr "원격 관리가 활성화 되었습니다." -#: src/modules/Remote.rb:332 +#: src/modules/Remote.rb:332 msgid "Remote administration is disabled." msgstr "원격 관리가 비활성화 되었습니다." -#. Progress stage 1 -#: src/modules/Routing.rb:264 +#. Progress stage 1 +#: src/modules/Routing.rb:264 msgid "Write IP forwarding settings" msgstr "IP 전달 설정 쓰기" -#. Progress stage 2 -#: src/modules/Routing.rb:266 +#. Progress stage 2 +#: src/modules/Routing.rb:266 msgid "Write routing settings" msgstr "라우팅 설정 쓰기" -#: src/modules/Routing.rb:269 +#: src/modules/Routing.rb:269 msgid "Saving Routing Configuration" msgstr "라우팅 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/Routing.rb:274 +#. Progress stage 1/2 +#: src/modules/Routing.rb:274 msgid "Writing IP forwarding settings..." msgstr "IP 전달 설정을 쓰는 중..." -#. at first stop the running routes -#. FIXME: SCR::Execute(.target.bash, "/etc/init.d/route stop"); -#. sysconfig does not support restarting routes only, -#. so we let our caller do it together with other things -#. Progress stage 2/2 -#: src/modules/Routing.rb:284 +#. at first stop the running routes +#. FIXME: SCR::Execute(.target.bash, "/etc/init.d/route stop"); +#. sysconfig does not support restarting routes only, +#. so we let our caller do it together with other things +#. Progress stage 2/2 +#: src/modules/Routing.rb:284 msgid "Writing routing settings..." msgstr "라우팅 설정을 쓰는 중..." -#. Summary text -#: src/modules/Routing.rb:454 +#. Summary text +#: src/modules/Routing.rb:454 msgid "Gateway: %s" msgstr "게이트웨이: %s" -#. Summary text -#: src/modules/Routing.rb:458 +#. Summary text +#: src/modules/Routing.rb:458 msgid "IP Forwarding for IPv4: %s" msgstr "IPv4에 대한 IP 전달: %s" -#. Summary text -#: src/modules/Routing.rb:462 +#. Summary text +#: src/modules/Routing.rb:462 msgid "IP Forwarding for IPv6: %s" msgstr "IPv6에 대한 IP 전달: %s" -#. item in combo box Firewall Zone -#: src/modules/SuSEFirewall4Network.rb:124 +#. item in combo box Firewall Zone +#: src/modules/SuSEFirewall4Network.rb:124 msgid "Automatically Assigned Zone" msgstr "자동 할당된 영역" -#. item in combo box Firewall Zone -#: src/modules/SuSEFirewall4Network.rb:127 +#. item in combo box Firewall Zone +#: src/modules/SuSEFirewall4Network.rb:127 msgid "Firewall Disabled" msgstr "방화벽 비활성화됨" -#. TRANSLATORS: Part of combo box item -> "Internal Zone (Unprotected)" -#: src/modules/SuSEFirewall4Network.rb:139 +#. TRANSLATORS: Part of combo box item -> "Internal Zone (Unprotected)" +#: src/modules/SuSEFirewall4Network.rb:139 msgid "(Unprotected)" msgstr "(보호되지 않음)" Modified: branches/SLE12-SP3/yast/ko/po/nfs.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/nfs.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/nfs.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,107 +14,107 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the nfs module -#: src/clients/nfs.rb:29 +#. Command line help text for the nfs module +#: src/clients/nfs.rb:29 msgid "Configuration of NFS client" msgstr "NFS 클라이언트 구성" -#. command line action help -#: src/clients/nfs.rb:43 +#. command line action help +#: src/clients/nfs.rb:43 msgid "List configured NFS mounts" msgstr "구성된 NFS 마운트 목록" -#. command line action help -#: src/clients/nfs.rb:50 +#. command line action help +#: src/clients/nfs.rb:50 msgid "Add an NFS mount" msgstr "NFS 마운트 추가" -#. command line action help -#: src/clients/nfs.rb:55 +#. command line action help +#: src/clients/nfs.rb:55 msgid "Edit an NFS mount" msgstr "NFS 마운트 편집" -#. command line action help -#: src/clients/nfs.rb:60 +#. command line action help +#: src/clients/nfs.rb:60 msgid "Delete an NFS mount" msgstr "NFS 마운트 삭제" -#. host:path -#. command line option help -#. fstab(5): fs_spec -#: src/clients/nfs.rb:70 +#. host:path +#. command line option help +#. fstab(5): fs_spec +#: src/clients/nfs.rb:70 msgid "Remote file system (in the form 'host:path')" msgstr "원격 파일 시스템('host:path' 형식)" -#. path -#. command line option help -#. fstab(5): fs_file -#: src/clients/nfs.rb:79 +#. path +#. command line option help +#. fstab(5): fs_file +#: src/clients/nfs.rb:79 msgid "Local mount point" msgstr "로컬 마운트 포인트" -#. a list? -#. command line option help -#. fstab(5): fs_mntops -#: src/clients/nfs.rb:89 +#. a list? +#. command line option help +#. fstab(5): fs_mntops +#: src/clients/nfs.rb:89 msgid "Mount options" msgstr "마운트 옵션" -#. nfs or nfs4 -#. command line option help -#. fstab(5): fs_type -#: src/clients/nfs.rb:98 +#. nfs or nfs4 +#. command line option help +#. fstab(5): fs_type +#: src/clients/nfs.rb:98 msgid "File system ID, supported nfs and nfs4. Default value is nfs." msgstr "파일 시스템 ID, 지원되는 nfs 및 nfs4입니다. 기본값은 nfs입니다." -#. CLI action handler. -#. Print summary in command line -#. @param [Hash] options command options -#. @return false so that Write is not called in non-interactive mode -#. table header -#: src/clients/nfs.rb:159 src/include/nfs/ui.rb:481 +#. CLI action handler. +#. Print summary in command line +#. @param [Hash] options command options +#. @return false so that Write is not called in non-interactive mode +#. table header +#: src/clients/nfs.rb:159 src/include/nfs/ui.rb:481 msgid "Server" msgstr "서버" -#: src/clients/nfs.rb:160 +#: src/clients/nfs.rb:160 msgid "Remote File System" msgstr "원격 파일 시스템" -#. table header -#: src/clients/nfs.rb:161 src/include/nfs/ui.rb:484 +#. table header +#: src/clients/nfs.rb:161 src/include/nfs/ui.rb:484 msgid "Mount Point" msgstr "마운트 포인트" -#. table header -#: src/clients/nfs.rb:162 src/include/nfs/ui.rb:488 +#. table header +#: src/clients/nfs.rb:162 src/include/nfs/ui.rb:488 msgid "Options" msgstr "옵션" -#. CLI action handler. -#. @param [Hash] options command options -#. @return whether successful -#: src/clients/nfs.rb:205 src/clients/nfs.rb:236 +#. CLI action handler. +#. @param [Hash] options command options +#. @return whether successful +#: src/clients/nfs.rb:205 src/clients/nfs.rb:236 msgid "Unknown value for option \"type\"." msgstr "\"유형\" 옵션에 대한 알 수 없는 값입니다." -#. error -#. error -#: src/clients/nfs.rb:230 src/clients/nfs.rb:334 +#. error +#. error +#: src/clients/nfs.rb:230 src/clients/nfs.rb:334 msgid "No NFS mount specified." msgstr "NFS 마운트가 지정되지 않았습니다." -#. error message -#: src/clients/nfs.rb:253 +#. error message +#: src/clients/nfs.rb:253 msgid "No NFS mount matching the criteria found." msgstr "조건과 일치하는 NFS 마운트를 찾을 수 없습니다." -#. error message -#: src/clients/nfs.rb:271 +#. error message +#: src/clients/nfs.rb:271 msgid "Multiple NFS mounts match the criteria:" msgstr "조건과 일치하는 NFS 마운트가 여러 개 있습니다:" -#. error popup message -#: src/include/nfs/routines.rb:83 +#. error popup message +#: src/include/nfs/routines.rb:83 msgid "" "The hostname entered is invalid. It must be\n" "shorter than 50 characters and only use\n" @@ -130,8 +130,8 @@ "올바른 IPv6: %2\n" "올바른 도메인: %3" -#. error popup message -#: src/include/nfs/routines.rb:115 +#. error popup message +#: src/include/nfs/routines.rb:115 msgid "" "fstab already contains an entry\n" "with mount point '%1'." @@ -139,8 +139,8 @@ "fstab에 이미 '%1' 마운트 포인트의\n" "항목이 포함되어 있습니다." -#. error popup message (spaces are now allowed) -#: src/include/nfs/routines.rb:137 +#. error popup message (spaces are now allowed) +#: src/include/nfs/routines.rb:137 msgid "" "The path entered is invalid.\n" "It must be shorter than 70 characters\n" @@ -150,8 +150,8 @@ "70자 미만이어야 하고 슬래시(/)로\n" " 시작해야 합니다." -#. Help, part 1 of 3 -#: src/include/nfs/ui.rb:41 +#. Help, part 1 of 3 +#: src/include/nfs/ui.rb:41 msgid "" "<p>The table contains all directories \n" "exported from remote servers and mounted locally via NFS (NFS shares).</p>" @@ -159,124 +159,117 @@ "<p>테이블에는 원격 서버에서 엑스포트되고 \n" "NFS(NFS 공유)를 통해 로컬로 마운트된 모든 디렉토리가 포함됩니다.</p>" -#. Help, part 2 of 3 -#: src/include/nfs/ui.rb:46 +#. Help, part 2 of 3 +#: src/include/nfs/ui.rb:46 msgid "" "<p>Each NFS share is identified by remote NFS server address and\n" "exported directory, local directory where the remote directory is mounted, \n" -"NFS type (either plain nfs or nfsv4) and mount options. For further " -"information \n" +"NFS type (either plain nfs or nfsv4) and mount options. For further information \n" "about mounting NFS and mount options, refer to <tt>man nfs.</tt></p>" msgstr "" "<p>각 NFS 공유는 원격 NFS 서버 주소에서 식별되고\n" "디렉토리, 원격 디렉토리가 마운트된 로컬 디렉토리, \n" -"NFS 유형(일반 nfs 또는 nfsv4) 및 마운트 옵션에 엑스포트됩니다. NFS 마운트 및 " -"마운트 옵션에 대한 자세한 내용은 \n" +"NFS 유형(일반 nfs 또는 nfsv4) 및 마운트 옵션에 엑스포트됩니다. NFS 마운트 및 마운트 옵션에 대한 자세한 내용은 \n" "<tt>man nfs</tt>를 참조하십시오.</p>" -#. Help, part 3 of 3 -#: src/include/nfs/ui.rb:53 +#. Help, part 3 of 3 +#: src/include/nfs/ui.rb:53 msgid "" -"<p>To mount a new NFS share, click <B>Add</B>. To change the configuration " -"of\n" +"<p>To mount a new NFS share, click <B>Add</B>. To change the configuration of\n" "a currently mounted share, click <B>Edit</B>. Remove and unmount a selected\n" "share with <B>Delete</B>.</p>\n" msgstr "" -"<p>새 NFS 공유를 마운트하려면 <B>추가</B>를 클릭하십시오. 현재 마운트된 공유" -"의\n" +"<p>새 NFS 공유를 마운트하려면 <B>추가</B>를 클릭하십시오. 현재 마운트된 공유의\n" "구성을 변경하려면 <B>편집</B>을 클릭하십시오. <B>삭제</B>를 사용하여\n" "선택한 공유를 제거하고 마운트 해제하십시오.</p>\n" -#: src/include/nfs/ui.rb:60 +#: src/include/nfs/ui.rb:60 msgid "" "<p>If you need to access NFSv4 shares (NFSv4 is a newer version of the NFS\n" -"protocol), check the <b>Enable NFSv4</b> option. In that case, you might " -"need\n" -"to supply specific a <b>NFSv4 Domain Name</b> required for the correct " -"setting\n" +"protocol), check the <b>Enable NFSv4</b> option. In that case, you might need\n" +"to supply specific a <b>NFSv4 Domain Name</b> required for the correct setting\n" "of file/directory access rights.</p>\n" msgstr "" "<p>NFSv4 공유에 액세스해야 하는 경우(NFSv4는 NFS\n" "프로토콜의 최신 버전임) <b>NFSv4 활성화</b> 옵션을 선택하십시오. 이 경우\n" -"파일/디렉토리 액세스 권한의 올바른 설정에 필요한 특정 <b>NFSv4 도메인 이름을\n" +"파일/디렉토리 액세스 권한의 올바른 설정에 필요한 특정 <b>NFSv4 도메인 이름</b>을\n" "제공해야 할 수도 있습니다.</p>\n" -#. selection box label -#. changed from "Remote hosts" because now it shows -#. NFS servers only -#: src/include/nfs/ui.rb:164 +#. selection box label +#. changed from "Remote hosts" because now it shows +#. NFS servers only +#: src/include/nfs/ui.rb:164 msgid "&NFS Servers" msgstr "NFS 서버들(&N)" -#. selection box label -#: src/include/nfs/ui.rb:176 +#. selection box label +#: src/include/nfs/ui.rb:176 msgid "&Exported Directories" msgstr "수출된 디렉토리(&E)" -#. text entry label -#: src/include/nfs/ui.rb:249 +#. text entry label +#: src/include/nfs/ui.rb:249 msgid "&NFS Server Hostname" msgstr "NFS 서버 호스트 이름(&N)" -#. pushbutton label -#. choose a host from a list -#. appears in help text too -#: src/include/nfs/ui.rb:255 +#. pushbutton label +#. choose a host from a list +#. appears in help text too +#: src/include/nfs/ui.rb:255 msgid "Choo&se" msgstr "선택(&S)" -#. textentry label -#: src/include/nfs/ui.rb:263 +#. textentry label +#: src/include/nfs/ui.rb:263 msgid "&Remote Directory" msgstr "원격 디렉토리(&R)" -#. pushbutton label, -#. select from a list of remote filesystems -#. make it short -#. appears in help text too -#: src/include/nfs/ui.rb:270 +#. pushbutton label, +#. select from a list of remote filesystems +#. make it short +#. appears in help text too +#: src/include/nfs/ui.rb:270 msgid "&Select" msgstr "선택(&S)" -#: src/include/nfs/ui.rb:275 +#: src/include/nfs/ui.rb:275 msgid "NFS&v4 Share" msgstr "NFSv4 공유(&V)" -#. parallel NFS, protocol version 4.1 -#: src/include/nfs/ui.rb:278 +#. parallel NFS, protocol version 4.1 +#: src/include/nfs/ui.rb:278 msgid "pNFS (v4.1)" msgstr "pNFS(v4.1)" -#. textentry label -#: src/include/nfs/ui.rb:287 +#. textentry label +#: src/include/nfs/ui.rb:287 msgid "&Mount Point (local)" msgstr "마운트 포인트(로컬)(&M)" -#. button label -#. browse directories to select a mount point -#. appears in help text too -#: src/include/nfs/ui.rb:293 +#. button label +#. browse directories to select a mount point +#. appears in help text too +#: src/include/nfs/ui.rb:293 msgid "&Browse" msgstr "찾아보기(&B)" -#. textentry label -#: src/include/nfs/ui.rb:298 +#. textentry label +#: src/include/nfs/ui.rb:298 msgid "O&ptions" msgstr "옵션(&P)" -#. label message -#: src/include/nfs/ui.rb:319 +#. label message +#: src/include/nfs/ui.rb:319 msgid "Scanning for hosts on this LAN..." msgstr "이 LAN에서 호스트를 위해 검색중..." -#. Translators: 1st part of error message -#: src/include/nfs/ui.rb:325 +#. Translators: 1st part of error message +#: src/include/nfs/ui.rb:325 msgid "No NFS server has been found on your network." msgstr "네트워크에서 NTP 서버를 찾을 수 없습니다." -#. Translators: 2nd part of error message (1st one is 'No nfs servers have been found ...) -#: src/include/nfs/ui.rb:331 +#. Translators: 2nd part of error message (1st one is 'No nfs servers have been found ...) +#: src/include/nfs/ui.rb:331 msgid "" "\n" "This could be caused by a running SuSEfirewall2,\n" @@ -286,19 +279,19 @@ "이는 네트워크 검색을 차단할 수 있는 SuSEfirewall2가\n" "실행되고 있기 때문일 수 있습니다." -#. Popup dialog, %1 is a host name -#: src/include/nfs/ui.rb:356 +#. Popup dialog, %1 is a host name +#: src/include/nfs/ui.rb:356 msgid "Getting directory list for \"%1\"..." msgstr "\"%1\"을 위해 디렉토리 목록을 얻는중..." -#. heading for a directory selection dialog -#: src/include/nfs/ui.rb:371 +#. heading for a directory selection dialog +#: src/include/nfs/ui.rb:371 msgid "Select the Mount Point" msgstr "마운트 포인트 선택" -#. help text 1/4 -#. change: locally defined -> servers on LAN -#: src/include/nfs/ui.rb:420 +#. help text 1/4 +#. change: locally defined -> servers on LAN +#: src/include/nfs/ui.rb:420 msgid "" "<p>Enter the <b>NFS Server Hostname</b>. With\n" "<b>Choose</b>, browse through a list of\n" @@ -308,9 +301,9 @@ "사용하여 로컬 네트워크에 있는 \n" " NFS 서버 목록을 살펴볼 수 있습니다.</p>\n" -#. help text 2/4 -#. added "Select" button -#: src/include/nfs/ui.rb:429 +#. help text 2/4 +#. added "Select" button +#: src/include/nfs/ui.rb:429 msgid "" "<p>In <b>Remote File System</b>,\n" "enter the path to the directory on the NFS server. Use\n" @@ -322,23 +315,21 @@ " 엑스포트한 것들 중 하나를 선택하려면 <b>선택</b>을 사용합니다.\n" " </p>" -#. help text 3/4 -#: src/include/nfs/ui.rb:439 +#. help text 3/4 +#: src/include/nfs/ui.rb:439 msgid "" "<p>\t\t\n" -"For <b>Mount Point</b>, enter the path in the local file system where the " -"directory should be mounted. With\n" +"For <b>Mount Point</b>, enter the path in the local file system where the directory should be mounted. With\n" "<b>Browse</b>, select your mount point\n" "interactively.</p>" msgstr "" "<p>\t\t\n" -"<b>마운트 포인트</b>에는 디렉토리를 마운트해야 하는 로컬 파일 시스템의 경로" -"를 입력합니다. <b>찾아보기</b>를\n" +"<b>마운트 포인트</b>에는 디렉토리를 마운트해야 하는 로컬 파일 시스템의 경로를 입력합니다. <b>찾아보기</b>를\n" " 사용하면 대화형으로 마운트 포인트를\n" " 선택할 수 있습니다.</p>" -#. help text 4/4 -#: src/include/nfs/ui.rb:450 +#. help text 4/4 +#: src/include/nfs/ui.rb:450 msgid "" "<p>For a list of <b>Options</b>,\n" "read the man page mount(8).</p>" @@ -346,58 +337,58 @@ "<p><b>옵션</b> 목록을 보려면\n" "맨 페이지 mount(8)를 읽어보십시오.</p>" -#. popup heading -#: src/include/nfs/ui.rb:455 +#. popup heading +#: src/include/nfs/ui.rb:455 msgid "Help" msgstr "도움말" -#: src/include/nfs/ui.rb:482 +#: src/include/nfs/ui.rb:482 msgid "Remote Directory" msgstr "원격 디렉토리" -#. table header -#: src/include/nfs/ui.rb:486 +#. table header +#: src/include/nfs/ui.rb:486 msgid "NFS Type" msgstr "NFS 유형" -#. #211570 -#: src/include/nfs/ui.rb:507 +#. #211570 +#: src/include/nfs/ui.rb:507 msgid "Enable NFSv4" msgstr "NFSv4 활성화" -#: src/include/nfs/ui.rb:508 +#: src/include/nfs/ui.rb:508 msgid "NFSv4 Domain Name" msgstr "NFSv4 도메인 이름" -#: src/include/nfs/ui.rb:513 +#: src/include/nfs/ui.rb:513 msgid "Enable &GSS Security" msgstr "GSS 보안 활성화(&G)" -#: src/include/nfs/ui.rb:527 +#: src/include/nfs/ui.rb:527 msgid "&NFS Shares" msgstr "NFS 공유(&N)" -#: src/include/nfs/ui.rb:528 +#: src/include/nfs/ui.rb:528 msgid "NFS &Settings" msgstr "NFS 설정(&S)" -#. Default values -#: src/include/nfs/ui.rb:640 +#. Default values +#: src/include/nfs/ui.rb:640 msgid "Really delete %1?" msgstr "%1을(를) 삭제하시겠습니까?" -#. dialog heading -#: src/include/nfs/ui.rb:681 +#. dialog heading +#: src/include/nfs/ui.rb:681 msgid "NFS Client Configuration" msgstr "NFS 클라이언트 구성" -#. error popup message -#: src/modules/Nfs.rb:385 +#. error popup message +#: src/modules/Nfs.rb:385 msgid "Unable to create directory '%1'." msgstr "'%1' 디렉토리를 생성할 수 없습니다." -#. error popup message -#: src/modules/Nfs.rb:403 +#. error popup message +#: src/modules/Nfs.rb:403 msgid "" "Unable to write to /etc/fstab.\n" "No changes will be made to the\n" @@ -407,77 +398,77 @@ "NFS 클라이언트 구성이 변경되지\n" " 않습니다.\n" -#. dialog label -#: src/modules/Nfs.rb:446 +#. dialog label +#: src/modules/Nfs.rb:446 msgid "Writing NFS Configuration" msgstr "NFS 구성 쓰기" -#. progress stage label -#: src/modules/Nfs.rb:451 +#. progress stage label +#: src/modules/Nfs.rb:451 msgid "Stop services" msgstr "서비스 중지" -#. progress stage label -#: src/modules/Nfs.rb:453 +#. progress stage label +#: src/modules/Nfs.rb:453 msgid "Start services" msgstr "서비스 시작" -#. progress step label -#: src/modules/Nfs.rb:457 +#. progress step label +#: src/modules/Nfs.rb:457 msgid "Stopping services..." msgstr "서비스 중지중..." -#. progress step label -#: src/modules/Nfs.rb:459 +#. progress step label +#: src/modules/Nfs.rb:459 msgid "Starting services..." msgstr "서비스 시작중..." -#. final progress step label -#: src/modules/Nfs.rb:461 +#. final progress step label +#: src/modules/Nfs.rb:461 msgid "Finished" msgstr "완료되었습니다." -#. help text -#: src/modules/Nfs.rb:467 +#. help text +#: src/modules/Nfs.rb:467 msgid "Writing NFS client settings. Please wait..." msgstr "NFS 클라이언트 설정을 쓰고 있습니다. 잠시 기다려 주십시오..." -#. error popup message -#: src/modules/Nfs.rb:487 +#. error popup message +#: src/modules/Nfs.rb:487 msgid "Unable to mount the NFS entries from /etc/fstab." msgstr "/etc/fstab 으로부터 NFS 항목을 마운트할 수 없습니다." -#. summary header -#: src/modules/Nfs.rb:506 +#. summary header +#: src/modules/Nfs.rb:506 msgid "NFS Entries" msgstr "NFS 항목" -#. summary item, %1 is a number -#: src/modules/Nfs.rb:510 +#. summary item, %1 is a number +#: src/modules/Nfs.rb:510 msgid "%1 entries configured" msgstr "%1개 항목이 구성되었습니다." -#. To translators: error popup -#: src/modules/NfsOptions.rb:140 +#. To translators: error popup +#: src/modules/NfsOptions.rb:140 msgid "Empty option strings are not allowed." msgstr "옵션 문자열은 비워 둘 수 없습니다." -#. To translators: error popup -#: src/modules/NfsOptions.rb:151 +#. To translators: error popup +#: src/modules/NfsOptions.rb:151 msgid "Unexpected value '%{value}' for option '%{key}'" msgstr "옵션 '%{key}'에 대한 예기치 않은 값 '%{value}'" -#. To translators: error popup -#: src/modules/NfsOptions.rb:155 +#. To translators: error popup +#: src/modules/NfsOptions.rb:155 msgid "Unknown option: '%{key}'" msgstr "알 수 없는 옵션: '%{key}'" -#. To translators: error popup -#: src/modules/NfsOptions.rb:159 +#. To translators: error popup +#: src/modules/NfsOptions.rb:159 msgid "Invalid option: '%{opt}'" msgstr "잘못된 옵션: '%{opt}'" -#. To translators: error popup -#: src/modules/NfsOptions.rb:163 +#. To translators: error popup +#: src/modules/NfsOptions.rb:163 msgid "Empty value for option: '%{key}'" msgstr "빈 옵션 값: '%{key}'" Modified: branches/SLE12-SP3/yast/ko/po/nfs_server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/nfs_server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/nfs_server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,85 +14,83 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the nfs-server module -#: src/clients/nfs_server.rb:46 +#. Command line help text for the nfs-server module +#: src/clients/nfs_server.rb:46 msgid "Configuration of NFS server" msgstr "NFS 서버 구성" -#. command line action help -#: src/clients/nfs_server.rb:59 +#. command line action help +#: src/clients/nfs_server.rb:59 msgid "NFS server configuration summary" msgstr "NFS 서버 구성 요약" -#: src/clients/nfs_server.rb:68 +#: src/clients/nfs_server.rb:68 msgid "Start NFS server" msgstr "NFS 서버 시작" -#: src/clients/nfs_server.rb:72 +#: src/clients/nfs_server.rb:72 msgid "Stop NFS server" msgstr "NFS 서버 중지" -#: src/clients/nfs_server.rb:76 +#: src/clients/nfs_server.rb:76 msgid "Add a directory to export" msgstr "엑스포트할 디렉토리 추가" -#: src/clients/nfs_server.rb:83 +#: src/clients/nfs_server.rb:83 msgid "Delete a directory from export" msgstr "엑스포트 목록에서 디렉토리 삭제" -#: src/clients/nfs_server.rb:90 +#: src/clients/nfs_server.rb:90 msgid "Set the parameters for domain, security and enablev4." msgstr "도메인, 보안 및 enablev4에 대한 파라미터를 설정하십시오." -#: src/clients/nfs_server.rb:98 +#: src/clients/nfs_server.rb:98 msgid "Directory to export" msgstr "엑스포트할 디렉토리" -#: src/clients/nfs_server.rb:102 +#: src/clients/nfs_server.rb:102 msgid "Host wild card for setting the access to directory" msgstr "디렉토리에 대한 액세스 설정을 위한 호스트 와일드카드" -#. command line option help (do not transl. 'man exports') -#: src/clients/nfs_server.rb:107 +#. command line option help (do not transl. 'man exports') +#: src/clients/nfs_server.rb:107 msgid "Export options (see 'man exports')" msgstr "엑스포트 옵션('man exports' 참조)" -#: src/clients/nfs_server.rb:113 -msgid "" -"Domain specification for NFSv4 ID mapping, such as 'localdomain' or 'abc." -"com' etc." +#: src/clients/nfs_server.rb:113 +msgid "Domain specification for NFSv4 ID mapping, such as 'localdomain' or 'abc.com' etc." msgstr "NFSv4 ID 매핑에 대한 도메인 사양(예: 'localdomain' 또는 'abc.com' 등)" -#: src/clients/nfs_server.rb:119 +#: src/clients/nfs_server.rb:119 msgid "Yes/No option for enabling/disabling support for NFSv4." msgstr "NFSv4 지원 활성화/비활성화에 대한 예/아니요 옵션입니다." -#: src/clients/nfs_server.rb:125 +#: src/clients/nfs_server.rb:125 msgid "Yes/No option for enabling/disabling secure NFS." msgstr "보안 NFS 활성화/비활성화에 대한 예/아니요 옵션입니다." -#. summary text -#: src/clients/nfs_server.rb:196 +#. summary text +#: src/clients/nfs_server.rb:196 msgid "NFS server is enabled" msgstr "NFS 서버가 활성화되었습니다." -#. summary text -#: src/clients/nfs_server.rb:199 +#. summary text +#: src/clients/nfs_server.rb:199 msgid "NFS server is disabled" msgstr "NFS 서버가 비활성화되었습니다." -#. error message -#: src/clients/nfs_server.rb:215 +#. error message +#: src/clients/nfs_server.rb:215 msgid "Required packages (%1) are not installed." msgstr "필요한 패키지(%1)가 설치되지 않았습니다." -#. error -#. error -#: src/clients/nfs_server.rb:255 src/clients/nfs_server.rb:285 +#. error +#. error +#: src/clients/nfs_server.rb:255 src/clients/nfs_server.rb:285 msgid "No mount point specified." msgstr "마운트 포인트를 지정하지 않았습니다." -#: src/clients/nfs_server.rb:260 +#: src/clients/nfs_server.rb:260 msgid "" "The exports table already\n" "contains this directory." @@ -100,27 +98,20 @@ "외부에 제공될(export) 테이블에 \n" "이미 있는 디렉토리입니다" -#. CLI action handler. -#. @param [Hash] options command options -#. @return whether successful -#: src/clients/nfs_server.rb:319 -msgid "" -"Domain cannot be set without enabling NFSv4. Use the 'set enablev4' command." -msgstr "" -"NFSv4를 활성화하지 않으면 도메인을 설정할 수 없습니다. 'set enablev4' 명령을 " -"사용하십시오." +#. CLI action handler. +#. @param [Hash] options command options +#. @return whether successful +#: src/clients/nfs_server.rb:319 +msgid "Domain cannot be set without enabling NFSv4. Use the 'set enablev4' command." +msgstr "NFSv4를 활성화하지 않으면 도메인을 설정할 수 없습니다. 'set enablev4' 명령을 사용하십시오." -#: src/clients/nfs_server.rb:330 -msgid "" -"Command 'set' must be used in the form 'set option=value'. Use 'set help' to " -"get information about available options." -msgstr "" -"'set' 명령은 'set option=value' 형식으로 사용해야 합니다. 사용 가능한 옵션에 " -"대한 정보를 가져오려면 'set help'를 사용하십시오." +#: src/clients/nfs_server.rb:330 +msgid "Command 'set' must be used in the form 'set option=value'. Use 'set help' to get information about available options." +msgstr "'set' 명령은 'set option=value' 형식으로 사용해야 합니다. 사용 가능한 옵션에 대한 정보를 가져오려면 'set help'를 사용하십시오." -#. Then no need to check for conflict. -#: src/include/nfs_server/routines.rb:205 -#: src/include/nfs_server/routines.rb:215 +#. Then no need to check for conflict. +#: src/include/nfs_server/routines.rb:205 +#: src/include/nfs_server/routines.rb:215 msgid "" "%3 and %4 are both exported with the option fsid=0\n" "for the same client '%1' (contained in '%2')" @@ -128,13 +119,13 @@ "'%2'에 포함되어 있는 같은 클라이언트 '%1'에 대해\n" " fsid=0 옵션을 사용하면 %3 및 %4이(가) 모두 내보내집니다." -#. selection box label -#: src/include/nfs_server/routines.rb:313 +#. selection box label +#: src/include/nfs_server/routines.rb:313 msgid "Dire&ctories" msgstr "디렉토리" -#. error popup message -#: src/include/nfs_server/routines.rb:331 +#. error popup message +#: src/include/nfs_server/routines.rb:331 msgid "" "The wild card or options string is invalid.\n" "It must be shorter than 70 characters and it\n" @@ -144,8 +135,8 @@ "70자 미만이어야 하고 공백을 포함해서는\n" " 안 됩니다.\n" -#. error popup message -#: src/include/nfs_server/routines.rb:353 +#. error popup message +#: src/include/nfs_server/routines.rb:353 msgid "" "Invalid option.\n" "Only letters, digits, and the characters =/.:,_- are allowed." @@ -153,18 +144,18 @@ "잘못된 옵션입니다.\n" "문자, 숫자 및 =/.:,_- 문자만 허용됩니다." -#. error popup message -#: src/include/nfs_server/routines.rb:401 +#. error popup message +#: src/include/nfs_server/routines.rb:401 msgid "Unknown option: '%1'" msgstr "알 수 없는 옵션: %1" -#. error popup message -#: src/include/nfs_server/routines.rb:406 +#. error popup message +#: src/include/nfs_server/routines.rb:406 msgid "Invalid option: '%1'" msgstr "잘못된 옵션: %1" -#. %1 is a list of exported paths -#: src/include/nfs_server/routines.rb:438 +#. %1 is a list of exported paths +#: src/include/nfs_server/routines.rb:438 msgid "" "There are unbalanced parentheses in export options\n" "for %1.\n" @@ -174,51 +165,51 @@ "잘못되었습니다.\n" "구성 파일에 비논리적인 공백이 있는 것 같습니다.\n" -#. text entry label -#: src/include/nfs_server/ui.rb:58 +#. text entry label +#: src/include/nfs_server/ui.rb:58 msgid "&Directory to Export" msgstr "엑스포트할 디렉토리(&D)" -#. button label -#: src/include/nfs_server/ui.rb:64 +#. button label +#: src/include/nfs_server/ui.rb:64 msgid "&Browse..." msgstr "찾아보기(&B)..." -#: src/include/nfs_server/ui.rb:87 +#: src/include/nfs_server/ui.rb:87 msgid "Enter a non-empty export path. For example, /exports." msgstr "엑스포트 경로를 입력하십시오(예: /exports)." -#. error popup message -#: src/include/nfs_server/ui.rb:95 +#. error popup message +#: src/include/nfs_server/ui.rb:95 msgid "The exports table already contains this directory." msgstr "내보내기 테이블에 이 디렉토리가 이미 있습니다." -#. the dir does not exist -#: src/include/nfs_server/ui.rb:101 +#. the dir does not exist +#: src/include/nfs_server/ui.rb:101 msgid "The directory does not exist. Create it?" msgstr "" "디렉토리는 존재하지 않습니다.\n" "디렉토리를 만드시겠습니까?" -#. title in the file selection dialog -#: src/include/nfs_server/ui.rb:111 +#. title in the file selection dialog +#: src/include/nfs_server/ui.rb:111 msgid "Select the Directory to Export" msgstr "엑스포트할 디렉토리 선택" -#. text entry label -#: src/include/nfs_server/ui.rb:168 +#. text entry label +#: src/include/nfs_server/ui.rb:168 msgid "&Host Wild Card" msgstr "호스트 와일드카드(&H)" -#. text entry label -#: src/include/nfs_server/ui.rb:170 +#. text entry label +#: src/include/nfs_server/ui.rb:170 msgid "O&ptions" msgstr "옵션(&P)" -#. check to see if user has changed options entry in the dialogue -#. thrown due to a "Add Hosts" (as opposed to editing existing ones). -#. If yes, suggest the user with a suitable default option set. -#: src/include/nfs_server/ui.rb:222 +#. check to see if user has changed options entry in the dialogue +#. thrown due to a "Add Hosts" (as opposed to editing existing ones). +#. If yes, suggest the user with a suitable default option set. +#: src/include/nfs_server/ui.rb:222 msgid "" "'fsid=0' is not a valid option unless \n" "NFSv4 is enabled (previous page).\n" @@ -226,8 +217,8 @@ "NFSv4가 활성화되지 않은 경우(이전 페이지) \n" "'fsid=0'은 유효한 옵션이 아닙니다.\n" -#. error popup message -#: src/include/nfs_server/ui.rb:240 +#. error popup message +#: src/include/nfs_server/ui.rb:240 msgid "" "Options for this wild card\n" "are already set." @@ -235,18 +226,14 @@ "이 와일드카드에 대한 옵션이\n" "이미 설정되었습니다." -#. Opening NFS server dialog -#. @return `back, `abort, `next `or finish -#: src/include/nfs_server/ui.rb:272 -msgid "" -"Unable to read the /etc/idmapd.conf file. Setting the default setting for " -"the domain to 'localdomain'." -msgstr "" -"/etc/idmapd.conf 파일을 읽을 수 없습니다. 도메인의 기본값을 'localdomain'으" -"로 설정합니다." +#. Opening NFS server dialog +#. @return `back, `abort, `next `or finish +#: src/include/nfs_server/ui.rb:272 +msgid "Unable to read the /etc/idmapd.conf file. Setting the default setting for the domain to 'localdomain'." +msgstr "/etc/idmapd.conf 파일을 읽을 수 없습니다. 도메인의 기본값을 'localdomain'으로 설정합니다." -#. Help, part 1 of 2 -#: src/include/nfs_server/ui.rb:295 +#. Help, part 1 of 2 +#: src/include/nfs_server/ui.rb:295 msgid "" "<P>Here, choose whether to start an NFS server on your computer\n" "and export some of your directories to others.</P>" @@ -254,8 +241,8 @@ "<P>여기서는 컴퓨터에서 NFS 서버를 시작할지 여부 및 디렉토리 일부를\n" "다른 곳으로 엑스포트할지 여부를 선택합니다.</P>" -#. Help, part 2 of 2 -#: src/include/nfs_server/ui.rb:302 +#. Help, part 2 of 2 +#: src/include/nfs_server/ui.rb:302 msgid "" "<P>If you choose <B>Start NFS Server</B>, clicking <B>Next</B> opens\n" "a configuration dialog in which to specify the directories to export.</P>" @@ -263,70 +250,64 @@ "<P><B>NFS 서버 시작</B>을 선택하고 <B>다음</B>을 클릭하면\n" "엑스포트할 디렉토리를 지정할 수 있는 구성 대화 상자가 열립니다.</P>" -#: src/include/nfs_server/ui.rb:311 +#: src/include/nfs_server/ui.rb:311 msgid "" "<P>If the server needs to handle NFSv4 clients, check <B>Enable NFSv4</B>\n" -"and fill in the NFSv4 domain name you want the ID mapping daemon to use. " -"Leave\n" -"it as localdomain or refer to the man page for idmapd and idmapd.conf if you " -"are not sure.</P>\n" +"and fill in the NFSv4 domain name you want the ID mapping daemon to use. Leave\n" +"it as localdomain or refer to the man page for idmapd and idmapd.conf if you are not sure.</P>\n" msgstr "" -"<P>서버에서 NFSv4 클라이언트를 처리해야 하는 경우 <B>NFSv4 활성화</B>를 선택" -"하고\n" +"<P>서버에서 NFSv4 클라이언트를 처리해야 하는 경우 <B>NFSv4 활성화</B>를 선택하고\n" "ID 매핑 데몬에서 사용하려는 NFSv4 도메인 이름을 채우십시오.\n" -"localdomain으로 그대로 두거나, 확실하지 않은 경우 idmapd 및 idmapd.conf에 대" -"한 매뉴얼 페이지를 참조하십시오.</P>\n" +"localdomain으로 그대로 두거나, 확실하지 않은 경우 idmapd 및 idmapd.conf에 대한 매뉴얼 페이지를 참조하십시오.</P>\n" -#. FIXME: use %1 as nfs-utils.src.rpm produces nfs-kernel-server.rpm -#: src/include/nfs_server/ui.rb:321 +#. FIXME: use %1 as nfs-utils.src.rpm produces nfs-kernel-server.rpm +#: src/include/nfs_server/ui.rb:321 msgid "" "<P>If the server and client must authenticate using GSS library, check the\n" -"<B>Enable GSS Security</B> box. To use GSS API, you currently need to have " -"Kerberos and gssapi (nfs-utils > 1.0.7) on your system.</P>\n" +"<B>Enable GSS Security</B> box. To use GSS API, you currently need to have Kerberos and gssapi (nfs-utils > 1.0.7) on your system.</P>\n" msgstr "" "<P>서버 및 클라이언트에서 GSS 라이브러리로 인증해야 하는 경우\n" -"<B>GSS 보안 활성화</B> 확인란을 선택하십시오. GSS API를 사용하려면 현재 시스" -"템에 Kerberos 및 gssapi(nfs-utils > 1.0.7)가 있어야 합니다.</P>\n" +"<B>GSS 보안 활성화</B> 확인란을 선택하십시오. GSS API를 사용하려면 현재 시스템에 Kerberos 및 gssapi(nfs-utils > 1.0.7)가 있어야 합니다.</P>\n" -#. frame label -#: src/include/nfs_server/ui.rb:331 +#. frame label +#: src/include/nfs_server/ui.rb:331 msgid "NFS Server" msgstr "NFS 서버" -#. radio button label -#: src/include/nfs_server/ui.rb:342 +#. radio button label +#: src/include/nfs_server/ui.rb:342 msgid "&Start" msgstr "시작(&S)" -#. radio button label -#: src/include/nfs_server/ui.rb:351 +#. radio button label +#: src/include/nfs_server/ui.rb:351 msgid "Do &Not Start" msgstr "시작 안 함(&N)" -#. frame label -#: src/include/nfs_server/ui.rb:369 +#. frame label +#: src/include/nfs_server/ui.rb:369 msgid "Enable NFSv4" msgstr "NFSv4 활성화" -#: src/include/nfs_server/ui.rb:376 +#: src/include/nfs_server/ui.rb:376 msgid "Enable NFS&v4" msgstr "NFSv4 활성화(&V)" -#: src/include/nfs_server/ui.rb:381 +#: src/include/nfs_server/ui.rb:381 msgid "Enter NFSv4 do&main name:" msgstr "NFSv4 도메인 이름 입력(&M):" -#: src/include/nfs_server/ui.rb:391 +#: src/include/nfs_server/ui.rb:391 msgid "Enable &GSS Security" msgstr "GSS 보안 활성화(&G)" -#. dialog title -#: src/include/nfs_server/ui.rb:411 +#. dialog title +#: src/include/nfs_server/ui.rb:411 msgid "NFS Server Configuration" msgstr "NFS 서버 구성" -#. Help, part 1 of 4 -#: src/include/nfs_server/ui.rb:487 +#. Help, part 1 of 4 +#: src/include/nfs_server/ui.rb:487 msgid "" "<P>The upper box contains all the directories to export.\n" "If a directory is selected, the lower box shows the hosts allowed to\n" @@ -336,78 +317,74 @@ "디렉토리를 선택하면 해당 디렉토리의 마운트가 허용되는\n" " 호스트가 아래쪽 상자에 표시됩니다.</P>\n" -#. Help, part 2 of 4 -#: src/include/nfs_server/ui.rb:495 +#. Help, part 2 of 4 +#: src/include/nfs_server/ui.rb:495 msgid "" -"<P><b>Host Wild Card</b> sets which hosts can access the selected " -"directory.\n" +"<P><b>Host Wild Card</b> sets which hosts can access the selected directory.\n" "It can be a single host, groups, wild cards, or\n" "IP networks.</P>\n" msgstr "" -"<P><b>호스트 와일드카드</b>에서는 선택한 디렉토리에 액세스할 수 있는 호스트" -"를\n" +"<P><b>호스트 와일드카드</b>에서는 선택한 디렉토리에 액세스할 수 있는 호스트를\n" " 설정합니다. 단일 호스트, 그룹, 와일드카드 또는 IP 네트워크가\n" " 될 수 있습니다.</P>\n" -#. Help, part 3 of 4 -#: src/include/nfs_server/ui.rb:503 -msgid "" -"<p>Enter an asterisk (<tt>*</tt>) instead of a name to specify all hosts.</p>" -msgstr "" -"<p>모든 호스트를 지정하려면 이름 대신 별표(<tt>*</tt>)를 입력합니다.</p>" +#. Help, part 3 of 4 +#: src/include/nfs_server/ui.rb:503 +msgid "<p>Enter an asterisk (<tt>*</tt>) instead of a name to specify all hosts.</p>" +msgstr "<p>모든 호스트를 지정하려면 이름 대신 별표(<tt>*</tt>)를 입력합니다.</p>" -#. Help, part 4 of 4 -#: src/include/nfs_server/ui.rb:509 +#. Help, part 4 of 4 +#: src/include/nfs_server/ui.rb:509 msgid "<P>Refer to <tt>man exports</tt> for more information.</P>\n" msgstr "<P>자세한 내용은 <tt>man exports</tt>를 참조하십시오.</P>\n" -#. push button label -#: src/include/nfs_server/ui.rb:524 +#. push button label +#: src/include/nfs_server/ui.rb:524 msgid "Add &Directory" msgstr "디렉토리 추가(&D)" -#. push button label -#: src/include/nfs_server/ui.rb:526 +#. push button label +#: src/include/nfs_server/ui.rb:526 msgid "&Edit" msgstr "편집(&E)" -#. push button label -#: src/include/nfs_server/ui.rb:528 +#. push button label +#: src/include/nfs_server/ui.rb:528 msgid "De&lete" msgstr "삭제(&L)" -#. table header -#: src/include/nfs_server/ui.rb:541 +#. table header +#: src/include/nfs_server/ui.rb:541 msgid "Host Wild Card" msgstr "호스트 와일드카드" -#. table header -#: src/include/nfs_server/ui.rb:543 +#. table header +#: src/include/nfs_server/ui.rb:543 msgid "Options" msgstr "옵션" -#. push button label -#: src/include/nfs_server/ui.rb:554 +#. push button label +#: src/include/nfs_server/ui.rb:554 msgid "Add &Host" msgstr "호스트 추가(&H)" -#. push button label -#: src/include/nfs_server/ui.rb:556 +#. push button label +#: src/include/nfs_server/ui.rb:556 msgid "Ed&it" msgstr "편집(&I)" -#. push button label -#: src/include/nfs_server/ui.rb:558 +#. push button label +#: src/include/nfs_server/ui.rb:558 msgid "Dele&te" msgstr "삭제(&T)" -#. dialog title -#: src/include/nfs_server/ui.rb:565 +#. dialog title +#: src/include/nfs_server/ui.rb:565 msgid "Directories to Export" msgstr "엑스포트할 디렉토리" -#. not fatal - write other dirs. -#: src/modules/NfsServer.rb:158 +#. not fatal - write other dirs. +#: src/modules/NfsServer.rb:158 msgid "" "Unable to create a missing directory:\n" "%1" @@ -415,8 +392,8 @@ "누락된 디렉토리를 생성할 수 없음:\n" "%1" -#. error popup message -#: src/modules/NfsServer.rb:170 +#. error popup message +#: src/modules/NfsServer.rb:170 msgid "" "Unable to write to /etc/exports.\n" "No changes will be made to the\n" @@ -426,65 +403,61 @@ "디렉토리의 변경사항이 저장되지\n" "않았습니다.\n" -#. dialog label -#: src/modules/NfsServer.rb:192 +#. dialog label +#: src/modules/NfsServer.rb:192 msgid "Writing NFS Server Configuration" msgstr "NFS 서버 구성 쓰기" -#. progress stage label -#: src/modules/NfsServer.rb:197 +#. progress stage label +#: src/modules/NfsServer.rb:197 msgid "Save /etc/exports" msgstr "/etc/exports 저장하기" -#. progress stage label -#: src/modules/NfsServer.rb:199 +#. progress stage label +#: src/modules/NfsServer.rb:199 msgid "Restart services" msgstr "서비스 재시작" -#. progress step label -#: src/modules/NfsServer.rb:203 +#. progress step label +#: src/modules/NfsServer.rb:203 msgid "Saving /etc/exports..." msgstr "/etc/exports 저장중..." -#. progress step label -#: src/modules/NfsServer.rb:205 +#. progress step label +#: src/modules/NfsServer.rb:205 msgid "Restarting services..." msgstr "서비스 재시작" -#. final progress step label -#: src/modules/NfsServer.rb:207 +#. final progress step label +#: src/modules/NfsServer.rb:207 msgid "Finished" msgstr "완료됨" -#. help text -#: src/modules/NfsServer.rb:215 +#. help text +#: src/modules/NfsServer.rb:215 msgid "Writing NFS server settings. Please wait..." msgstr "NFS 서버 설정을 쓰고 있습니다. 잠시 기다려 주십시오..." -#. Independent of @ref start because of Heartbeat (#27001). -#: src/modules/NfsServer.rb:229 +#. Independent of @ref start because of Heartbeat (#27001). +#: src/modules/NfsServer.rb:229 msgid "Unable to write to idmapd.conf." msgstr "idmapd.conf에 쓸 수 없습니다." -#. FIXME svcgssd is gone! (only nfsserver is left) -#: src/modules/NfsServer.rb:266 -msgid "" -"Unable to start svcgssd. Ensure your kerberos and gssapi (nfs-utils) setup " -"is correct." -msgstr "" -"svcgssd를 시작할 수 없습니다. kerberos 및 gssapi(nfs-utils) 설정이 올바른지 " -"확인하십시오." +#. FIXME svcgssd is gone! (only nfsserver is left) +#: src/modules/NfsServer.rb:266 +msgid "Unable to start svcgssd. Ensure your kerberos and gssapi (nfs-utils) setup is correct." +msgstr "svcgssd를 시작할 수 없습니다. kerberos 및 gssapi(nfs-utils) 설정이 올바른지 확인하십시오." -#: src/modules/NfsServer.rb:275 +#: src/modules/NfsServer.rb:275 msgid "Unable to restart 'svcgssd' service." msgstr "'svcgssd' 서비스를 다시 시작할 수 없습니다." -#: src/modules/NfsServer.rb:283 +#: src/modules/NfsServer.rb:283 msgid "'svcgssd' is running. Unable to stop it." msgstr "'svcgssd'는 실행 중입니다. 중지할 수 없습니다." -#. error popup message -#: src/modules/NfsServer.rb:299 +#. error popup message +#: src/modules/NfsServer.rb:299 msgid "" "Unable to restart the NFS server.\n" "Your changes will be active after reboot.\n" @@ -492,12 +465,12 @@ "NFS 서버를 재시작할 수 없습니다\n" "컴퓨터를 재부팅하셔야 변경사항이 활성화됩니다.\n" -#. summary header; directories exported by NFS -#: src/modules/NfsServer.rb:322 +#. summary header; directories exported by NFS +#: src/modules/NfsServer.rb:322 msgid "NFS Exports" msgstr "NFS Exports" -#. add information reg NFSv4 support, domain and security -#: src/modules/NfsServer.rb:340 +#. add information reg NFSv4 support, domain and security +#: src/modules/NfsServer.rb:340 msgid "The NFSv4 domain for idmapping is %1." msgstr "idmapping용 NFSv4 도메인은 %1입니다." Modified: branches/SLE12-SP3/yast/ko/po/nis.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/nis.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/nis.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,80 +14,80 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help text for Ldap client module -#: src/clients/nis.rb:74 +#. translators: command line help text for Ldap client module +#: src/clients/nis.rb:74 msgid "NIS client configuration module." msgstr "NIS 클라이언트 구성 모듈" -#. command line help text for 'enable' action -#: src/clients/nis.rb:84 +#. command line help text for 'enable' action +#: src/clients/nis.rb:84 msgid "Enable your machine as NIS client" msgstr "컴퓨터를 NIS 클라이언트로 활성화" -#. command line help text for 'disable' action -#: src/clients/nis.rb:91 +#. command line help text for 'disable' action +#: src/clients/nis.rb:91 msgid "Disable the NIS client" msgstr "NIS 클라이언트 비활성화" -#. command line help text for 'summary' action -#: src/clients/nis.rb:98 +#. command line help text for 'summary' action +#: src/clients/nis.rb:98 msgid "Configuration summary of NIS client" msgstr "NIS 클라이언트 구성 요약" -#. command line help text for 'configure' action -#: src/clients/nis.rb:109 +#. command line help text for 'configure' action +#: src/clients/nis.rb:109 msgid "Change the global settings of NIS client" msgstr "NIS 클라이언트의 전역 설정 변경" -#. command line help text for 'find' action -#: src/clients/nis.rb:116 +#. command line help text for 'find' action +#: src/clients/nis.rb:116 msgid "Show available NIS servers for given domain" msgstr "지정된 도메인에 대해 사용할 수 있는 NIS 서버 표시" -#. command line help text for the 'server' option -#: src/clients/nis.rb:124 +#. command line help text for the 'server' option +#: src/clients/nis.rb:124 msgid "NIS server name or address" msgstr "NIS 서버 이름 또는 주소" -#. command line help text for the 'domain' option -#: src/clients/nis.rb:131 +#. command line help text for the 'domain' option +#: src/clients/nis.rb:131 msgid "NIS domain" msgstr "NIS 도메인" -#. help text for the 'automounter' option -#: src/clients/nis.rb:138 +#. help text for the 'automounter' option +#: src/clients/nis.rb:138 msgid "Start or stop automounter" msgstr "자동 마운터 시작 또는 중지" -#. help text for the 'broadcast' option -#: src/clients/nis.rb:146 +#. help text for the 'broadcast' option +#: src/clients/nis.rb:146 msgid "Set or unset broadcast search" msgstr "브로드캐스트 검색 설정 또는 설정 취소" -#. Print summary of basic options -#. @return [Boolean] false -#. summary header -#: src/clients/nis.rb:260 src/modules/Nis.rb:862 +#. Print summary of basic options +#. @return [Boolean] false +#. summary header +#: src/clients/nis.rb:260 src/modules/Nis.rb:862 msgid "Automounter enabled" msgstr "Automounter 활성화됨" -#. summary item: an option is turned on -#. summary item: an option is turned on -#. summary item: an option is turned on -#. summary item: an option is turned on -#. summary item: an option is turned on -#: src/clients/nis.rb:261 src/modules/Nis.rb:831 src/modules/Nis.rb:844 -#: src/modules/Nis.rb:853 src/modules/Nis.rb:857 src/modules/Nis.rb:864 -#: src/modules/Nis.rb:892 +#. summary item: an option is turned on +#. summary item: an option is turned on +#. summary item: an option is turned on +#. summary item: an option is turned on +#. summary item: an option is turned on +#: src/clients/nis.rb:261 src/modules/Nis.rb:831 src/modules/Nis.rb:844 +#: src/modules/Nis.rb:853 src/modules/Nis.rb:857 src/modules/Nis.rb:864 +#: src/modules/Nis.rb:892 msgid "Yes" msgstr "예" -#: src/clients/nis.rb:261 src/modules/Nis.rb:892 +#: src/clients/nis.rb:261 src/modules/Nis.rb:892 msgid "No" msgstr "아니오" -#. Translators: network broadcast address -#: src/include/nis/ui.rb:62 +#. Translators: network broadcast address +#: src/include/nis/ui.rb:62 msgid "" "<p>The <b>Broadcast</b> option enables searching\n" "in the local network to find a server after the specified servers\n" @@ -97,8 +97,8 @@ "경우 로컬 네트워크에서 탐색을 가능하게 합니다.\n" "보안에 문제가 생길수 있습니다.</p>\n" -#. Translators: short for Expert settings -#: src/include/nis/ui.rb:71 +#. Translators: short for Expert settings +#: src/include/nis/ui.rb:71 msgid "" "<p><b>Expert</b> gives access to some\n" "less frequently used settings.</p>\n" @@ -106,37 +106,36 @@ "<p><b>고급</b>에서는 자주 사용하지 않는 \n" "설정에 액세스할 수 있습니다.<p>\n" -#. pushbutton label -#. Select all items (in this case NIS servers) of a list -#: src/include/nis/ui.rb:135 +#. pushbutton label +#. Select all items (in this case NIS servers) of a list +#: src/include/nis/ui.rb:135 msgid "Select &All" msgstr "전체 선택(&A)" -#. pushbutton label -#. Deselect all items (in this case NIS servers) of a list -#: src/include/nis/ui.rb:138 +#. pushbutton label +#. Deselect all items (in this case NIS servers) of a list +#: src/include/nis/ui.rb:138 msgid "Select &None" msgstr "전체 선택 취소(&N)" -#. popup window -#. LAN: local area network -#: src/include/nis/ui.rb:190 +#. popup window +#. LAN: local area network +#: src/include/nis/ui.rb:190 msgid "Scanning for NIS servers in domain %1 on this LAN..." msgstr "이 LAN의 %1 도메인에서 NIS 서버를 검색하는 중..." -#. selection box label -#: src/include/nis/ui.rb:209 +#. selection box label +#: src/include/nis/ui.rb:209 msgid "&NIS Servers in Domain %1" msgstr "%1 도메인의 NIS 서버(&N)" -#. firewall opening help -#: src/include/nis/ui.rb:228 +#. firewall opening help +#: src/include/nis/ui.rb:228 msgid "" "<p><b>Firewall Settings</b><br>\n" "To open the firewall to allow accessing the 'ypbind' service\n" "from remote computers, set <b>Open Port in Firewall</b>.\n" -"To select interfaces on which to open the port, click <b>Firewall Details.\n" +"To select interfaces on which to open the port, click <b>Firewall Details</b>.\n" "This option is only available if the firewall is enabled.</p>\n" msgstr "" "<p><b>방화벽 설정</b><br>\n" @@ -145,8 +144,8 @@ " 포트를 열 인터페이스를 선택하려면 <b>방화벽 세부 사항</b>을 클릭하십시오.\n" " 이 옵션은 방화벽이 활성화된 경우에만 사용할 수 있습니다.</p>\n" -#. help text -#: src/include/nis/ui.rb:240 +#. help text +#: src/include/nis/ui.rb:240 msgid "" "<p>Enter your NIS domain, such as example.com,\n" " and the NIS server's address, such as nis.example.com or 10.20.1.1.</p>\n" @@ -154,47 +153,40 @@ "<p>example.com과 같은 NIS 도메인 및 nis.example.com\n" " 또는 10.20.1.1과 같은 NIS 서버의 주소를 입력하십시오.</p>\n" -#. help text for netconfig part -#: src/include/nis/ui.rb:244 +#. help text for netconfig part +#: src/include/nis/ui.rb:244 msgid "" -"<p>Select the way how the NIS configuration will be modified. Normally, it " -"is\n" -"handled by the netconfig script, which merges the data statically defined " -"here\n" +"<p>Select the way how the NIS configuration will be modified. Normally, it is\n" +"handled by the netconfig script, which merges the data statically defined here\n" "with dynamically obtained data (e.g. from DHCP client, NetworkManager\n" "etc.). This is the Default Policy and sufficient for most configurations. \n" -"By choosing Only Manual Changes, netconfig will no longer be allowed to " -"modify\n" +"By choosing Only Manual Changes, netconfig will no longer be allowed to modify\n" "the configuration. You can, however, edit the file manually. By choosing\n" "Custom Policy, you can specify a custom policy string, which consists of a\n" "space-separated list of interface names, including wildcards, with\n" -"STATIC/STATIC_FALLBACK as predefined special values. For more information, " -"see\n" +"STATIC/STATIC_FALLBACK as predefined special values. For more information, see\n" "the netconfig manual page.</p>\n" msgstr "" "<p>NIS 구성이 수정되는 방법을 선택하십시오. 일반적으로\n" "여기서 고정적으로 정의된 데이터를 동적으로 얻은 데이터(예:\n" -"DHCP 클라이언트, NetworkManager 등)와 병합하는 netconfig 스크립트에 의해 처리" -"됩니다.\n" +"DHCP 클라이언트, NetworkManager 등)와 병합하는 netconfig 스크립트에 의해 처리됩니다.\n" "기본 정책이며 대부분의 구성에 충분합니다. \n" "[수동 변경사항만]을 선택하면 netconfig에서 더 이상 구성을 수정할 수\n" "없습니다. 그러나 파일을 수동으로 편집할 수 있습니다.\n" -"[사용자 정의 정책]을 선택하면 인터페이스 이름의 쉼표로 구분된 목록으로 구성" -"된\n" +"[사용자 정의 정책]을 선택하면 인터페이스 이름의 쉼표로 구분된 목록으로 구성된\n" "사용자 정의 정책 문자열을 지정할 수 있습니다. 여기에는\n" -"STATIC 및 STATIC_FALLBACK이 미리 정의된 특수 값인 와일드카드가 포함됩니다. 자" -"세한 내용은\n" +"STATIC 및 STATIC_FALLBACK이 미리 정의된 특수 값인 와일드카드가 포함됩니다. 자세한 내용은\n" "netconfig 매뉴얼 페이지를 참조하십시오.</p>\n" -#. help text -#: src/include/nis/ui.rb:260 +#. help text +#: src/include/nis/ui.rb:260 msgid "" "<p>Specify multiple servers\n" "by separating their addresses with spaces.</p>\n" msgstr "<p>다중 서버는 주소를 공백으로 분리해서 정해주십시오.</p>\n" -#. help text -#: src/include/nis/ui.rb:271 +#. help text +#: src/include/nis/ui.rb:271 msgid "" "<p><b>Automounter</b> is a daemon that mounts directories automatically,\n" "such as users' home directories.\n" @@ -206,131 +198,126 @@ "구성 파일(auto.*)이 로컬이나 NIS상에 이미\n" "존재한다고 가정합니다.</p>" -#. help text -#: src/include/nis/ui.rb:279 -msgid "" -"<p>NFS Settings which affects how the automounter operates could be set in " -"NFS Client, which can be configured using <b>NFS Configuration</b> button." -msgstr "" -"<p>자동 마운터의 작동 방식에 영향을 주는 NFS 설정은 NFS 클라이언트에서 설정" -"할 수 있습니다. <b>NFS 구성</b> 버튼을 사용하여 구성할 수 있습니다.</p>" +#. help text +#: src/include/nis/ui.rb:279 +msgid "<p>NFS Settings which affects how the automounter operates could be set in NFS Client, which can be configured using <b>NFS Configuration</b> button.</p>" +msgstr "<p>자동 마운터의 작동 방식에 영향을 주는 NFS 설정은 NFS 클라이언트에서 설정할 수 있습니다. <b>NFS 구성</b> 버튼을 사용하여 구성할 수 있습니다.</p>" -#. radio button label -#: src/include/nis/ui.rb:333 +#. radio button label +#: src/include/nis/ui.rb:333 msgid "Au&tomatic Setup (Via NetworkManager and DHCP)" msgstr "자동 설정(NetworkManager 및 DHCP 사용)(&T)" -#. radio button label -#: src/include/nis/ui.rb:335 +#. radio button label +#: src/include/nis/ui.rb:335 msgid "Au&tomatic Setup (via DHCP)" msgstr "자동 설치(DHCP를 통해)(&T)" -#. frame label -#. frame label -#: src/include/nis/ui.rb:342 src/include/nis/ui.rb:1028 +#. frame label +#. frame label +#: src/include/nis/ui.rb:342 src/include/nis/ui.rb:1028 msgid "NIS client" msgstr "NIS 클라이언트" -#. combo box label -#: src/include/nis/ui.rb:352 +#. combo box label +#: src/include/nis/ui.rb:352 msgid "Netconfig NIS &Policy" msgstr "Netconfig NIS 정책(&P)" -#. combo box item -#: src/include/nis/ui.rb:355 +#. combo box item +#: src/include/nis/ui.rb:355 msgid "Only Manual Changes" msgstr "수동 변경사항만" -#. combo box item -#: src/include/nis/ui.rb:357 +#. combo box item +#: src/include/nis/ui.rb:357 msgid "Default Policy" msgstr "기본 정책" -#. combo box item -#: src/include/nis/ui.rb:359 +#. combo box item +#: src/include/nis/ui.rb:359 msgid "Custom Policy" msgstr "사용자 정의 정책" -#. text entry label -#: src/include/nis/ui.rb:367 +#. text entry label +#: src/include/nis/ui.rb:367 msgid "C&ustom Policy" msgstr "사용자 정의 정책(&U)" -#. text entry label -#: src/include/nis/ui.rb:377 src/include/nis/ui.rb:393 +#. text entry label +#: src/include/nis/ui.rb:377 src/include/nis/ui.rb:393 msgid "N&IS Domain" msgstr "NIS 도메인(&I)" -#. text entry label -#: src/include/nis/ui.rb:384 src/include/nis/ui.rb:401 +#. text entry label +#: src/include/nis/ui.rb:384 src/include/nis/ui.rb:401 msgid "&Addresses of NIS servers" msgstr "NIS 서버 주소(&A)" -#. check box label -#. checkbox label -#: src/include/nis/ui.rb:411 src/include/nis/ui.rb:853 +#. check box label +#. checkbox label +#: src/include/nis/ui.rb:411 src/include/nis/ui.rb:853 msgid "&Broadcast" msgstr "브로드캐스트(&B)" -#. pushbutton label, find nis servers -#. Shortcut must not conflict with Finish and Next (#29960) -#. pushbutton label, find nis servers -#. Shortcut must not conflict with Finish and Next (#29960) -#: src/include/nis/ui.rb:417 src/include/nis/ui.rb:864 +#. pushbutton label, find nis servers +#. Shortcut must not conflict with Finish and Next (#29960) +#. pushbutton label, find nis servers +#. Shortcut must not conflict with Finish and Next (#29960) +#: src/include/nis/ui.rb:417 src/include/nis/ui.rb:864 msgid "Fin&d" msgstr "찾기(&D)" -#: src/include/nis/ui.rb:421 +#: src/include/nis/ui.rb:421 msgid "Additional NIS Domains" msgstr "추가 NIS 도메인" -#. button label -#: src/include/nis/ui.rb:435 +#. button label +#: src/include/nis/ui.rb:435 msgid "&Edit" msgstr "편집(&E)" -#. radio button label -#: src/include/nis/ui.rb:459 +#. radio button label +#: src/include/nis/ui.rb:459 msgid "Do ¬ use NIS" msgstr "NIS를 사용 안 함(&N)" -#. radio button label -#: src/include/nis/ui.rb:468 +#. radio button label +#: src/include/nis/ui.rb:468 msgid "&Use NIS" msgstr "NIS 사용(&U)" -#. button label (short for Expert settings) -#: src/include/nis/ui.rb:489 +#. button label (short for Expert settings) +#: src/include/nis/ui.rb:489 msgid "E&xpert..." msgstr "고급(&X)..." -#. button label -#: src/include/nis/ui.rb:495 +#. button label +#: src/include/nis/ui.rb:495 msgid "NFS Configuration..." msgstr "NFS 구성..." -#. check box label -#: src/include/nis/ui.rb:499 +#. check box label +#: src/include/nis/ui.rb:499 msgid "Start Auto&mounter" msgstr "자동 마운터 시작(&M)" -#. dialog title -#. dialog title -#: src/include/nis/ui.rb:508 src/include/nis/ui.rb:1036 +#. dialog title +#. dialog title +#: src/include/nis/ui.rb:508 src/include/nis/ui.rb:1036 msgid "Configuration of NIS client" msgstr "NIS 클라이언트 설정" -#. Message popup. The user wants to Find servers -#. but the domain is unknown. -#. Message popup. The user wants to Find servers -#. but the domain is unknown. -#: src/include/nis/ui.rb:575 src/include/nis/ui.rb:904 +#. Message popup. The user wants to Find servers +#. but the domain is unknown. +#. Message popup. The user wants to Find servers +#. but the domain is unknown. +#: src/include/nis/ui.rb:575 src/include/nis/ui.rb:904 msgid "Finding servers works only when the domain is known." msgstr "도메인이 알려져 있는 경우에만 서버를 찾을 수 있습니다." -#. yes-no popup -#: src/include/nis/ui.rb:593 +#. yes-no popup +#: src/include/nis/ui.rb:593 msgid "" "When you configure your machine as a NIS client,\n" "you cannot retrieve the user data from LDAP.\n" @@ -340,89 +327,77 @@ "사용자 데이터를 검색할 수 없습니다.\n" "계속하시겠습니까?" -#. help text 1/4 -#: src/include/nis/ui.rb:676 -msgid "" -"<p>Normally, it is possible for any host to query which server a client is " -"using. Disabling <b>Answer Remote Hosts</b> restricts this only to the local " -"host.</p>" -msgstr "" -"<p>일반적으로 모든 호스트는 클라이언트가 어떤 서버를 사용하는지 쿼리할 수 있" -"습니다. 이러한 기능을 로컬 호스트로만 제한하려면 <b>원격 호스트에 응답</b>을 " -"비활성화하십시오.</p>" +#. help text 1/4 +#: src/include/nis/ui.rb:676 +msgid "<p>Normally, it is possible for any host to query which server a client is using. Disabling <b>Answer Remote Hosts</b> restricts this only to the local host.</p>" +msgstr "<p>일반적으로 모든 호스트는 클라이언트가 어떤 서버를 사용하는지 쿼리할 수 있습니다. 이러한 기능을 로컬 호스트로만 제한하려면 <b>원격 호스트에 응답</b>을 비활성화하십시오.</p>" -#. help text 2/4 -#. Check, ie. turn on a check box -#: src/include/nis/ui.rb:684 -msgid "" -"<p>Check <b>Broken server</b> if answers from servers running on an " -"unprivileged port should be accepted. It is a security risk and it is better " -"to replace such a server.</p>" -msgstr "" -"<p>권한이 없는 포트를 사용하는 서버로부터 응답을 받으려면 <b>브로큰 서버</b>" -"를 체크하십시오. 이는 보안상 문제가 있고 그 서버를 바꾸는 것이 더 좋습니다." +#. help text 2/4 +#. Check, ie. turn on a check box +#: src/include/nis/ui.rb:684 +msgid "<p>Check <b>Broken server</b> if answers from servers running on an unprivileged port should be accepted. It is a security risk and it is better to replace such a server.</p>" +msgstr "<p>권한이 없는 포트를 사용하는 서버로부터 응답을 받으려면 <b>브로큰 서버</b>를 체크하십시오. 이는 보안상 문제가 있고 그 서버를 바꾸는 것이 더 좋습니다.</p>" -#. help text 3/4 -#: src/include/nis/ui.rb:692 +#. help text 3/4 +#: src/include/nis/ui.rb:692 msgid "<p>See <b>man ypbind</b> for details on other options.</p>" msgstr "<p>다른 옵션에 대한 세부 내용은 <b>man ypbind</b>를 참고하십시오.</p>" -#. frame label -#. dialog title -#: src/include/nis/ui.rb:703 src/include/nis/ui.rb:731 +#. frame label +#. dialog title +#: src/include/nis/ui.rb:703 src/include/nis/ui.rb:731 msgid "Expert settings" msgstr "고급 설정" -#. check box label -#: src/include/nis/ui.rb:708 +#. check box label +#: src/include/nis/ui.rb:708 msgid "Ans&wer Remote Hosts" msgstr "원격 호스트에 응답(&W)" -#. check box label -#: src/include/nis/ui.rb:712 +#. check box label +#: src/include/nis/ui.rb:712 msgid "Br&oken server" msgstr "브로큰 서버(&O)" -#. text entry label (do not translate 'ypbind') -#: src/include/nis/ui.rb:719 +#. text entry label (do not translate 'ypbind') +#: src/include/nis/ui.rb:719 msgid "Other &ypbind options" msgstr "다른 ypbind 옵션(&Y)" -#. Translators: multilineedit label -#. comma: "," -#: src/include/nis/ui.rb:846 +#. Translators: multilineedit label +#. comma: "," +#: src/include/nis/ui.rb:846 msgid "&Servers (separated by spaces or commas)" msgstr "(&S)서버 (스페이스 또는 콤마로 구분)" -#. checkbox label -#: src/include/nis/ui.rb:859 +#. checkbox label +#: src/include/nis/ui.rb:859 msgid "&SLP" msgstr "SLP(&S)" -#. Translators: popup dialog heading -#: src/include/nis/ui.rb:874 +#. Translators: popup dialog heading +#: src/include/nis/ui.rb:874 msgid "Domain Settings" msgstr "도메인 설정" -#. Add a domain, Adding a domain? Edit... -#. Translators: text entry label -#: src/include/nis/ui.rb:877 +#. Add a domain, Adding a domain? Edit... +#. Translators: text entry label +#: src/include/nis/ui.rb:877 msgid "&Domain name" msgstr "도메인명(&D)" -#. Translators: error message -#: src/include/nis/ui.rb:932 +#. Translators: error message +#: src/include/nis/ui.rb:932 msgid "This domain is already defined." msgstr "이 도메인은 이미 정의되었습니다." -#. Translators: error message -#: src/include/nis/ui.rb:937 +#. Translators: error message +#: src/include/nis/ui.rb:937 msgid "The format of server address '%1' is not correct." msgstr "서버 주소의 포멧 '%1'이 올바르지 않습니다." -#. error message, 'Broadcast' and 'SLP' are checkboxes -#: src/include/nis/ui.rb:946 +#. error message, 'Broadcast' and 'SLP' are checkboxes +#: src/include/nis/ui.rb:946 msgid "" "Enabling both Broadcast and SLP options\n" "does not make any sense. Select just one option." @@ -430,65 +405,62 @@ "브로드캐스트와 SLP 옵션은 동시에 활성화할 수 없습니다.\n" "둘 중 하나만 선택하십시오." -#. help text -#: src/include/nis/ui.rb:979 +#. help text +#: src/include/nis/ui.rb:979 msgid "<p>Specify the servers for additional domains.</p>" msgstr "<p>추가 도메인의 서버를 지정하십시오.</p>" -#. help text -#: src/include/nis/ui.rb:987 -msgid "" -"<p>The Service Location Protocol (<b>SLP</b>) can be used to find NIS server." -"</p>" -msgstr "" -"<p><b>SLP</b>(Service Location Protocol)는 NIS 서버를 찾는 데 사용됩니다.</p>" +#. help text +#: src/include/nis/ui.rb:987 +msgid "<p>The Service Location Protocol (<b>SLP</b>) can be used to find NIS server.</p>" +msgstr "<p><b>SLP</b>(Service Location Protocol)는 NIS 서버를 찾는 데 사용됩니다.</p>" -#. dialog label -#. dialog subtitle -#: src/include/nis/ui.rb:999 src/include/nis/ui.rb:1038 +#. dialog label +#. dialog subtitle +#: src/include/nis/ui.rb:999 src/include/nis/ui.rb:1038 msgid "Additional Domains" msgstr "추가 도메인" -#. table header -#. summary item -#: src/include/nis/ui.rb:1005 src/modules/Nis.rb:889 +#. table header +#. summary item +#: src/include/nis/ui.rb:1005 src/modules/Nis.rb:889 msgid "Domain" msgstr "도메인" -#. table header -#. summary header -#: src/include/nis/ui.rb:1007 src/modules/Nis.rb:842 +#. table header +#. summary header +#: src/include/nis/ui.rb:1007 src/modules/Nis.rb:842 msgid "Broadcast" msgstr "브로드캐스트" -#. table header - Service Location Protocol -#: src/include/nis/ui.rb:1009 +#. table header - Service Location Protocol +#: src/include/nis/ui.rb:1009 msgid "SLP" msgstr "SLP " -#. table header -#. summary item -#: src/include/nis/ui.rb:1011 src/modules/Nis.rb:887 +#. table header +#. summary item +#: src/include/nis/ui.rb:1011 src/modules/Nis.rb:887 msgid "Servers" msgstr "서버" -#. button label -#: src/include/nis/ui.rb:1017 +#. button label +#: src/include/nis/ui.rb:1017 msgid "A&dd" msgstr "추가(&A)" -#. Translators: a yes-no popup -#: src/include/nis/ui.rb:1123 +#. Translators: a yes-no popup +#: src/include/nis/ui.rb:1123 msgid "Really delete this domain?" msgstr "정말로 이 도메인을 지우시겠습니까?" -#. popup text FIXME better... -#: src/include/nis/ui.rb:1253 +#. popup text FIXME better... +#: src/include/nis/ui.rb:1253 msgid "NIS is now enabled." msgstr "NIS가 활성화되었습니다." -#. Translators: do not translate (none)! -#: src/modules/Nis.rb:580 +#. Translators: do not translate (none)! +#: src/modules/Nis.rb:580 msgid "" "A NIS domain name must not be empty,\n" "it must not be \"(none)\",\n" @@ -498,8 +470,8 @@ "또한 \"(none)\"도 될수 없습니다.\n" "그리고 최대 64자 까지의 길이를 갖습니다.\n" -#. message popup -#: src/modules/Nis.rb:600 +#. message popup +#: src/modules/Nis.rb:600 msgid "" "Only an IP address can be used\n" "because host names are resolved using NIS.\n" @@ -508,105 +480,105 @@ "IP 주소만 사용할 수 있습니다. \n" "호스트명은 NIS를 이용하여 알아낼 수 있기 때문입니다.\n" -#. Translators: popup message part, ends with a newline -#: src/modules/Nis.rb:647 +#. Translators: popup message part, ends with a newline +#: src/modules/Nis.rb:647 msgid "The automounter package will be installed.\n" msgstr "automounter 패키지가 설치될 것입니다.\n" -#. summary: Domain or servers are retrieved by the -#. Dynamic Host Configuration Protocol. -#. Will be placed after NIS Domain/NIS Servers instead of the -#. actual settings. -#: src/modules/Nis.rb:826 +#. summary: Domain or servers are retrieved by the +#. Dynamic Host Configuration Protocol. +#. Will be placed after NIS Domain/NIS Servers instead of the +#. actual settings. +#: src/modules/Nis.rb:826 msgid "by DHCP" msgstr "DHCP에 의해" -#. summary header -#: src/modules/Nis.rb:829 +#. summary header +#: src/modules/Nis.rb:829 msgid "NIS Client enabled" msgstr "NIS 클라이언트 활성화됨" -#. summary header -#: src/modules/Nis.rb:833 +#. summary header +#: src/modules/Nis.rb:833 msgid "NIS Domain" msgstr "NIS 도메인" -#. summary header -#: src/modules/Nis.rb:836 +#. summary header +#: src/modules/Nis.rb:836 msgid "NIS Servers" msgstr "NIS 서버" -#. TODO: a full list -#: src/modules/Nis.rb:848 +#. TODO: a full list +#: src/modules/Nis.rb:848 msgid "Other domains" msgstr "기타 도메인" -#. summary header -#: src/modules/Nis.rb:851 +#. summary header +#: src/modules/Nis.rb:851 msgid "Answer to local host only" msgstr "로컬호스트에게만 응답한다." -#. summary header -#: src/modules/Nis.rb:855 +#. summary header +#: src/modules/Nis.rb:855 msgid "Broken server" msgstr "브로큰 서버" -#. summary header -#: src/modules/Nis.rb:859 +#. summary header +#: src/modules/Nis.rb:859 msgid "ypbind options" msgstr "ypbind 옵션" -#. summary item (yes/no follows) -#: src/modules/Nis.rb:892 +#. summary item (yes/no follows) +#: src/modules/Nis.rb:892 msgid "Client Enabled" msgstr "클라이언트 활성화됨" -#. 0 OK, 1 mean no domain name set, so no nis, do not report it -#: src/modules/Nis.rb:914 +#. 0 OK, 1 mean no domain name set, so no nis, do not report it +#: src/modules/Nis.rb:914 msgid "Getting domain name via ypdomainname failed with '%s'" msgstr "ypdomainname을 통한 도메인 이름 가져오기가 '%s'(으)로 실패" -#. dialog label -#: src/modules/Nis.rb:1210 +#. dialog label +#: src/modules/Nis.rb:1210 msgid "Writing NIS Configuration..." msgstr "NIS 설정 저장중..." -#. progress stage label -#: src/modules/Nis.rb:1215 +#. progress stage label +#: src/modules/Nis.rb:1215 msgid "Stop services" msgstr "서비스 중지" -#. progress stage label -#: src/modules/Nis.rb:1217 +#. progress stage label +#: src/modules/Nis.rb:1217 msgid "Start services" msgstr "서비스 시작" -#. progress step label -#: src/modules/Nis.rb:1221 +#. progress step label +#: src/modules/Nis.rb:1221 msgid "Stopping services..." msgstr "서비스 중지중..." -#. progress step label -#: src/modules/Nis.rb:1223 +#. progress step label +#: src/modules/Nis.rb:1223 msgid "Starting services..." msgstr "서비스 시작중..." -#. final progress step label -#: src/modules/Nis.rb:1225 +#. final progress step label +#: src/modules/Nis.rb:1225 msgid "Finished" msgstr "완료되었습니다." -#. help text -#: src/modules/Nis.rb:1231 +#. help text +#: src/modules/Nis.rb:1231 msgid "Writing NIS client settings" msgstr "NIS 클라이언트 설정 저장중" -#. error popup message -#: src/modules/Nis.rb:1256 +#. error popup message +#: src/modules/Nis.rb:1256 msgid "Error while running ypclient." msgstr "ypclient를 실행중에 오류가 생겼습니다." -#. error popup message -#: src/modules/Nis.rb:1264 +#. error popup message +#: src/modules/Nis.rb:1264 msgid "NIS server not found." msgstr "NIS 서버를 찾을 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/nis_server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/nis_server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/nis_server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,104 +14,104 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help text for nis server module -#: src/clients/nis_server.rb:58 +#. translators: command line help text for nis server module +#: src/clients/nis_server.rb:58 msgid "NIS server configuration module." msgstr "NIS 서버 구성 모듈" -#. command line help text for 'summary' action -#: src/clients/nis_server.rb:73 +#. command line help text for 'summary' action +#: src/clients/nis_server.rb:73 msgid "Configuration summary of NIS server" msgstr "NIS 서버 구성 요약" -#. command line action help -#: src/clients/nis_server.rb:83 +#. command line action help +#: src/clients/nis_server.rb:83 msgid "Stop NIS server" msgstr "NIS 서버 중지" -#. command line action help -#: src/clients/nis_server.rb:91 +#. command line action help +#: src/clients/nis_server.rb:91 msgid "Configure NIS master server" msgstr "NIS 마스터 서버 구성" -#. command line action help -#: src/clients/nis_server.rb:101 +#. command line action help +#: src/clients/nis_server.rb:101 msgid "Configure NIS slave server" msgstr "NIS 슬레이브 서버 구성" -#. command line help text for the 'domain' option -#: src/clients/nis_server.rb:109 +#. command line help text for the 'domain' option +#: src/clients/nis_server.rb:109 msgid "NIS domain" msgstr "NIS 도메인" -#. command line help text for the 'master_ip' option -#: src/clients/nis_server.rb:116 +#. command line help text for the 'master_ip' option +#: src/clients/nis_server.rb:116 msgid "IP address of master NIS server" msgstr "마스터 NIS 서버의 IP 주소" -#. command line help text for the 'yppasswd' option -#: src/clients/nis_server.rb:123 +#. command line help text for the 'yppasswd' option +#: src/clients/nis_server.rb:123 msgid "Start or stop yppasswd service" msgstr "yppasswd 서비스의 시작 또는 중지" -#. command line help text for the 'ypdir' option -#: src/clients/nis_server.rb:131 +#. command line help text for the 'ypdir' option +#: src/clients/nis_server.rb:131 msgid "YP source directory" msgstr "YP 소스 디렉토리" -#. command line help text for the 'maps' option -#: src/clients/nis_server.rb:138 +#. command line help text for the 'maps' option +#: src/clients/nis_server.rb:138 msgid "Maps distributed by server" msgstr "서버에서 배포한 맵" -#. command line help text for the 'hosts' option -#: src/clients/nis_server.rb:145 +#. command line help text for the 'hosts' option +#: src/clients/nis_server.rb:145 msgid "Hosts allowed to query server ('netmask:network')" msgstr "서버 쿼리가 허용된 호스트('넷마스크:네트워크')" -#. summary label -#. To translators: label in the dialog -#. To translators: label in the dialog -#: src/clients/nis_server.rb:180 src/include/nis_server/what.rb:86 -#: src/include/nis_server/what.rb:142 +#. summary label +#. To translators: label in the dialog +#. To translators: label in the dialog +#: src/clients/nis_server.rb:180 src/include/nis_server/what.rb:86 +#: src/include/nis_server/what.rb:142 msgid "No NIS Server is configured." msgstr "NIS 서버가 구성되지 않았습니다." -#. summary label -#: src/clients/nis_server.rb:186 +#. summary label +#: src/clients/nis_server.rb:186 msgid "A NIS master server is configured." msgstr "NIS 마스터 서버가 구성되었습니다." -#. summary label -#: src/clients/nis_server.rb:189 +#. summary label +#: src/clients/nis_server.rb:189 msgid "A NIS slave server is configured." msgstr "NIS 슬레이브 서버가 구성되었습니다." -#. summary label -#. Create a textual summary and a list of unconfigured cards -#. @param split split configured and unconfigured? -#. @return summary of the current configuration -#: src/clients/nis_server.rb:196 src/modules/NisServer.rb:1290 +#. summary label +#. Create a textual summary and a list of unconfigured cards +#. @param split split configured and unconfigured? +#. @return summary of the current configuration +#: src/clients/nis_server.rb:196 src/modules/NisServer.rb:1290 msgid "NIS Domain" msgstr "NIS 도메인" -#. summary label: -#: src/clients/nis_server.rb:204 +#. summary label: +#: src/clients/nis_server.rb:204 msgid "YP Source Directory: " msgstr "YP 소스 디렉토리:" -#. summary label: -#: src/clients/nis_server.rb:209 +#. summary label: +#: src/clients/nis_server.rb:209 msgid "Available Maps: " msgstr "사용 가능한 맵:" -#. summary label: -#: src/clients/nis_server.rb:217 +#. summary label: +#: src/clients/nis_server.rb:217 msgid "NIS Master Server: " msgstr "NIS 마스터 서버:" -#. summary label (netmask:network shows output format) -#: src/clients/nis_server.rb:235 +#. summary label (netmask:network shows output format) +#: src/clients/nis_server.rb:235 msgid "" "Hosts Allowed to Query Server (netmask:network):\n" "%1" @@ -119,23 +119,23 @@ "서버 쿼리가 허용된 호스트(넷마스크:네트워크):\n" "%1" -#. error message -#: src/clients/nis_server.rb:258 +#. error message +#: src/clients/nis_server.rb:258 msgid "Required packages (%1) are not installed." msgstr "필요한 패키지(%1)가 설치되지 않았습니다." -#. error message -#: src/clients/nis_server.rb:282 +#. error message +#: src/clients/nis_server.rb:282 msgid "Invalid netmask: %1.\n" msgstr "잘못된 넷마스크: %1.\n" -#. error message -#: src/clients/nis_server.rb:289 +#. error message +#: src/clients/nis_server.rb:289 msgid "Invalid network: %1.\n" msgstr "잘못된 네트워크: %1.\n" -#. error message -#: src/clients/nis_server.rb:356 +#. error message +#: src/clients/nis_server.rb:356 msgid "" "These maps are not supported:\n" "%1" @@ -143,13 +143,13 @@ "이러한 맵은 지원되지 않습니다:\n" "%1" -#. error message -#: src/clients/nis_server.rb:405 +#. error message +#: src/clients/nis_server.rb:405 msgid "NIS master server IP was not specified." msgstr "NIS 마스터 서버 IP를 지정하지 않았습니다." -#. help text 1/3 -#: src/include/nis_server/details.rb:66 +#. help text 1/3 +#: src/include/nis_server/details.rb:66 msgid "" "<p>You can change NIS server source directory (usually\n" "<i>'/etc'</i>).</p>" @@ -157,154 +157,147 @@ "NIS 서버 소스 디렉토리(일반적으로 \n" "<i>'/etc'</i>)를 변경할 수 있습니다." -#. help text 2/3 -#: src/include/nis_server/details.rb:73 +#. help text 2/3 +#: src/include/nis_server/details.rb:73 msgid "" -"<p>Select if your <i>passwd</i> file should be merged with the <i>shadow\n" +"<p>Select if your <i>passwd</i> file should be merged with the <i>shadow</i>\n" "file (only possible if the <i>shadow</i> file exists).</p>\n" msgstr "" "<p><i>passwd</i> 파일과 <i>shadow</i> 파일을 병합하려는 경우 선택합니다.\n" "(<i>shadow</i> 파일이 있는 경우에만 사용 가능)</p>\n" -#. help text 3/3 -#: src/include/nis_server/details.rb:81 +#. help text 3/3 +#: src/include/nis_server/details.rb:81 msgid "<p>You can also adjust the minimum user and group id.</p>" msgstr "<p>최소 사용자 ID와 그룹ID를 조정할 수 있습니다.</p>" -#. To translators: intfield label -#: src/include/nis_server/details.rb:86 +#. To translators: intfield label +#: src/include/nis_server/details.rb:86 msgid "Minimum &UID" msgstr "최소 UID(&U)" -#. To translators: intfield label -#: src/include/nis_server/details.rb:89 +#. To translators: intfield label +#: src/include/nis_server/details.rb:89 msgid "Minimum &GID" msgstr "최소 GID(&G)" -#. To translators: textentry label -#: src/include/nis_server/details.rb:98 +#. To translators: textentry label +#: src/include/nis_server/details.rb:98 msgid "&YP Source directory" msgstr "YP 소스 디렉토리(&Y)" -#. check box label -#: src/include/nis_server/details.rb:103 +#. check box label +#: src/include/nis_server/details.rb:103 msgid "Merge pa&sswords" msgstr "비밀번호 병합(&S)" -#. To translators: dialog label -#: src/include/nis_server/details.rb:111 +#. To translators: dialog label +#: src/include/nis_server/details.rb:111 msgid "NIS Master Server Details Setup" msgstr "NIS 주서버 세부 설정" -#. help text 1/1 -#. Translators: the text was truncated because now there's -#. a MultiSelectionBox instead of two SelectionBoxes that -#. were a pain to use. -#: src/include/nis_server/maps.rb:61 +#. help text 1/1 +#. Translators: the text was truncated because now there's +#. a MultiSelectionBox instead of two SelectionBoxes that +#. were a pain to use. +#: src/include/nis_server/maps.rb:61 msgid "<p>With this dialog, adjust which maps will be available.</p>" msgstr "<p>이 다이얼로그에서 사용가능한 맵을 조정할 수 있습니다.</p>" -#. multilesection box label -#: src/include/nis_server/maps.rb:103 +#. multilesection box label +#: src/include/nis_server/maps.rb:103 msgid "&Maps" msgstr "맵(&M)" -#. To translators: dialog label -#: src/include/nis_server/maps.rb:109 +#. To translators: dialog label +#: src/include/nis_server/maps.rb:109 msgid "NIS Server Maps Setup" msgstr "NIS 서버 맵 설정" -#. help text 1/3 -#: src/include/nis_server/master.rb:71 +#. help text 1/3 +#: src/include/nis_server/master.rb:71 msgid "" -"<p>Enter a NIS <b>domain</b>. If this host is also a NIS client using this " -"machine as a server, check\n" +"<p>Enter a NIS <b>domain</b>. If this host is also a NIS client using this machine as a server, check\n" "the corresponding option.</p>\n" msgstr "" -"<p>NIS <b>도메인</b>을 입력하십시오. 이 호스트 역시 이 컴퓨터를 서버로 사용하" -"는 NIS 클라이언트이면\n" +"<p>NIS <b>도메인</b>을 입력하십시오. 이 호스트 역시 이 컴퓨터를 서버로 사용하는 NIS 클라이언트이면\n" "해당 옵션을 선택하십시오.</p>\n" -#. help text 2/3 -#: src/include/nis_server/master.rb:78 +#. help text 2/3 +#: src/include/nis_server/master.rb:78 msgid "" "<p>For slave servers to cooperate with this master, check\n" "<i>Active Slave NIS server exists</i>. If you check\n" "<i>Fast Map distribution</i>, it will speed up the transfer of maps to the\n" "slaves.</p>\n" msgstr "" -"<p>이 주서버와 같이 동작하는 보조 서버를 위해서 <i>존재하는 NIS 보조서버 활성" -"화</i>\n" -"를 체크합니다. <i>빠른 맵 분배</i>을 체크하면 보조 서버로 빠르게 맵을 전송할 " -"수있습니다.\n" +"<p>이 주서버와 같이 동작하는 보조 서버를 위해서 <i>존재하는 NIS 보조서버 활성화</i>\n" +"를 체크합니다. <i>빠른 맵 분배</i>을 체크하면 보조 서버로 빠르게 맵을 전송할 수있습니다.\n" -#. help text 3/3 -#: src/include/nis_server/master.rb:89 +#. help text 3/3 +#: src/include/nis_server/master.rb:89 msgid "" "<p><i>Allow changes to passwords</i> lets the users change their\n" "passwords in the presence of NIS. Buttons to allow\n" "changing the login shell or GECOS (full name and related information) can\n" "be used to set up these more specific options.</p>\n" msgstr "" -"<p><i>비밀번호 변경허용</i>은 사용자가 NIS에 있는 자신의 비밀번호를 변경할 " -"수 있게합니다.\n" -"로그인 쉘이나 GECOS(전체이름과 관련정보)를 변경할 수 있게 하는 다른 버튼들은 " -"많은 특정 옵션을 설정하는데 사용될 것입니다.\n" +"<p><i>비밀번호 변경허용</i>은 사용자가 NIS에 있는 자신의 비밀번호를 변경할 수 있게합니다.\n" +"로그인 쉘이나 GECOS(전체이름과 관련정보)를 변경할 수 있게 하는 다른 버튼들은 많은 특정 옵션을 설정하는데 사용될 것입니다.\n" -#. To translators: checkbox label -#: src/include/nis_server/master.rb:106 +#. To translators: checkbox label +#: src/include/nis_server/master.rb:106 msgid "Allow changes to &GECOS field" msgstr "GECOS필드 변경 허용(&G)" -#. To translators: checkbox label -#: src/include/nis_server/master.rb:114 +#. To translators: checkbox label +#: src/include/nis_server/master.rb:114 msgid "Allow changes to login &shell" msgstr "로그인 쉘 변경 허용(&S)" -#. To translators: checkbox label -#: src/include/nis_server/master.rb:130 +#. To translators: checkbox label +#: src/include/nis_server/master.rb:130 msgid "Allow changes to &passwords" msgstr "비밀번호 변경 허용(&P)" -#. To translators: checkbox label -#. checkbox label -#: src/include/nis_server/master.rb:150 src/include/nis_server/slave.rb:98 +#. To translators: checkbox label +#. checkbox label +#: src/include/nis_server/master.rb:150 src/include/nis_server/slave.rb:98 msgid "This host is also a NIS &client" msgstr "이 호스트는 NIS 클라이언트도 됩니다.(&C)" -#. To translators: frame label -#: src/include/nis_server/master.rb:164 +#. To translators: frame label +#: src/include/nis_server/master.rb:164 msgid "NIS &Domain Name" msgstr "NIS 도메인명(&D)" -#. To translators: checkbox label -#: src/include/nis_server/master.rb:170 +#. To translators: checkbox label +#: src/include/nis_server/master.rb:170 msgid "Active Slave NIS server &exists" msgstr "존재하는 NIS 보조 서버 활성화(&E)" -#. To translators: checkbox label -#: src/include/nis_server/master.rb:179 +#. To translators: checkbox label +#: src/include/nis_server/master.rb:179 msgid "&Fast Map distribution (rpc.ypxfrd)" msgstr "빠른 맵 분배(rpc.ypxfrd) (&F)" -#. To translators: frame label -#: src/include/nis_server/master.rb:185 +#. To translators: frame label +#: src/include/nis_server/master.rb:185 msgid "Changing of passwords" msgstr "비밀번호 변경" -#. To translators: pushbutton label -#: src/include/nis_server/master.rb:193 +#. To translators: pushbutton label +#: src/include/nis_server/master.rb:193 msgid "&Other global settings ..." msgstr "기타 전역 설정(&O)" -#. To translators: dialog label -#: src/include/nis_server/master.rb:201 +#. To translators: dialog label +#: src/include/nis_server/master.rb:201 msgid "Master Server Setup" msgstr "마스터 서버 설치" -#. warning popup -#: src/include/nis_server/routines.rb:133 +#. warning popup +#: src/include/nis_server/routines.rb:133 msgid "" "Your machine is set up to change the NIS domain name via DHCP.\n" "This may replace the domain name just entered. Check your\n" @@ -314,14 +307,13 @@ "이렇게 하면 입력한 대로 도메인 이름이 대체될 수 있습니다. 설정을 확인한 후\n" " NIS 서버에서 DHCP 클라이언트를 실행하지 않는 것을 고려해보십시오.\n" -#. firewall openning help -#: src/include/nis_server/routines.rb:154 +#. firewall openning help +#: src/include/nis_server/routines.rb:154 msgid "" "<p><b>Firewall Settings</b><br>\n" "To open the firewall to allow accessing the NIS server\n" "from remote computers, set <b>Open Port in Firewall</b>.\n" -"To select interfaces on which to open the port, click <b>Firewall Details.\n" +"To select interfaces on which to open the port, click <b>Firewall Details</b>.\n" "This option is only available if the firewall is enabled.</p>\n" msgstr "" "<p><b>방화벽 설정</b><br>\n" @@ -330,38 +322,38 @@ " 포트를 열 인터페이스를 선택하려면 <b>방화벽 세부 사항</b>을 클릭하십시오.\n" " 이 옵션은 방화벽이 활성화된 경우에만 사용할 수 있습니다.</p>\n" -#. To translators: popup dialog heading -#: src/include/nis_server/securenets.rb:117 +#. To translators: popup dialog heading +#: src/include/nis_server/securenets.rb:117 msgid "Edit netmask and network" msgstr "넷마스크와 네트워크 편집" -#. To translators: textentry label -#: src/include/nis_server/securenets.rb:120 +#. To translators: textentry label +#: src/include/nis_server/securenets.rb:120 msgid "Net&mask" msgstr "(&M)넷마스크" -#. To translators: textentry label -#: src/include/nis_server/securenets.rb:123 +#. To translators: textentry label +#: src/include/nis_server/securenets.rb:123 msgid "Net&work" msgstr "네트워크(&W)" -#. To translators: error message -#: src/include/nis_server/securenets.rb:149 +#. To translators: error message +#: src/include/nis_server/securenets.rb:149 msgid "Wrong netmask!\n" msgstr "잘못된 넷마스크입니다.!\n" -#. To translators: error message -#: src/include/nis_server/securenets.rb:154 +#. To translators: error message +#: src/include/nis_server/securenets.rb:154 msgid "Wrong network!\n" msgstr "잘못된 네트워크입니다.!\n" -#. help text 1/4 -#: src/include/nis_server/securenets.rb:172 +#. help text 1/4 +#: src/include/nis_server/securenets.rb:172 msgid "<p>Please enter which hosts are allowed to query the NIS server.</p>" msgstr "<p>NIS 서버에 질의를 허용할 호스트를 입력하십시오</p>" -#. help text 2/4 -#: src/include/nis_server/securenets.rb:178 +#. help text 2/4 +#: src/include/nis_server/securenets.rb:178 msgid "" "<p>A host address will be allowed if <b>network</b> is equal\n" "to the bitwise <i>AND</i> of the host's address and the <b>netmask</b>.</p>" @@ -369,18 +361,17 @@ "<p>호스트 주소는 <b>네트워크</b>가 호스트의 주소와 \n" "<b>넷마스크</b>의 비트별 <i>AND연산</i>으로 같다면 허용될 것이다.</p>" -#. help text 3/4 -#: src/include/nis_server/securenets.rb:185 +#. help text 3/4 +#: src/include/nis_server/securenets.rb:185 msgid "" "<p>The entry with <b>netmask</b> <tt>255.0.0.0</tt> and <b>network</b>\n" "<tt>127.0.0.0</tt> must exist to allow connections from the local host.</p>\n" msgstr "" -"<b>넷마스크</b><tt>255.0.0.0</tt>와 <b>네트워크</b><tt>127.0.0.0</tt> 엔트리" -"는\n" +"<b>넷마스크</b><tt>255.0.0.0</tt>와 <b>네트워크</b><tt>127.0.0.0</tt> 엔트리는\n" "로컬 호스트에서 오는 접속을 허용하기 위해 반드시 존재해야 합니다.</p>\n" -#. help text 4/4 -#: src/include/nis_server/securenets.rb:192 +#. help text 4/4 +#: src/include/nis_server/securenets.rb:192 msgid "" "<p>Entering <b>netmask</b> <tt>0.0.0.0</tt> and\n" "<b>network</b> <tt>0.0.0.0</tt> gives access to all hosts.</p>" @@ -388,123 +379,109 @@ "<p><b>넷마스크</b> <tt>0.0.0.0</tt>와 <b>네트워크</b> <tt>0.0.0.0</tt>를\n" "입력하는 것은 모든 호스트가 접근 할 수 있게 합니다.</p>" -#. To translators: table header -#: src/include/nis_server/securenets.rb:206 +#. To translators: table header +#: src/include/nis_server/securenets.rb:206 msgid "Netmask" msgstr "넷마스크" -#. To translators: table header -#: src/include/nis_server/securenets.rb:208 +#. To translators: table header +#: src/include/nis_server/securenets.rb:208 msgid "Network" msgstr "네트워크" -#. To translators: dialog label -#: src/include/nis_server/securenets.rb:222 +#. To translators: dialog label +#: src/include/nis_server/securenets.rb:222 msgid "NIS Server Query Hosts Setup" msgstr "NIS 서버 질의 호스트 설정" -#. help text 1/2 -#: src/include/nis_server/slave.rb:62 -msgid "" -"<p>Enter the NIS <b>domain</b> and the IP <b>address</b> or host name of the " -"master NIS server.</p>" -msgstr "" -"<p>NIS <b>도메인</b>과 IP <b>주소</b> 또는 마스터 NIS 서버의 호스트 이름을 입" -"력하십시오.</p>" +#. help text 1/2 +#: src/include/nis_server/slave.rb:62 +msgid "<p>Enter the NIS <b>domain</b> and the IP <b>address</b> or host name of the master NIS server.</p>" +msgstr "<p>NIS <b>도메인</b>과 IP <b>주소</b> 또는 마스터 NIS 서버의 호스트 이름을 입력하십시오.</p>" -#. help text 2/2 -#: src/include/nis_server/slave.rb:69 -msgid "" -"<p>If this host is also a NIS client using this machine as a server, check " -"the corresponding option.</p>" -msgstr "" -"<p>이 호스트 역시 이 컴퓨터를 서버로 사용하는 NIS 클라이언트이면 해당 옵션을 " -"선택하십시오.</p>" +#. help text 2/2 +#: src/include/nis_server/slave.rb:69 +msgid "<p>If this host is also a NIS client using this machine as a server, check the corresponding option.</p>" +msgstr "<p>이 호스트 역시 이 컴퓨터를 서버로 사용하는 NIS 클라이언트이면 해당 옵션을 선택하십시오.</p>" -#. textentry label -#: src/include/nis_server/slave.rb:82 +#. textentry label +#: src/include/nis_server/slave.rb:82 msgid "N&IS Domain Name:" msgstr "NIS 도메인명(&I):" -#. text entry label -#: src/include/nis_server/slave.rb:90 +#. text entry label +#: src/include/nis_server/slave.rb:90 msgid "NIS &Master Server:" msgstr "NIS 마스터 서버(&M):" -#. To translators: dialog label -#: src/include/nis_server/slave.rb:109 +#. To translators: dialog label +#: src/include/nis_server/slave.rb:109 msgid "Slave Server Setup" msgstr "슬레이브 서버 설치" -#. To translators: selection box label -#: src/include/nis_server/slaves.rb:71 +#. To translators: selection box label +#: src/include/nis_server/slaves.rb:71 msgid "&Remote hosts" msgstr "원격 호스트들(&M)" -#. To translators: textentry label -#: src/include/nis_server/slaves.rb:100 +#. To translators: textentry label +#: src/include/nis_server/slaves.rb:100 msgid "&Slave's host name" msgstr "보조서버의 호스트명(&S)" -#. To translators: popup dialog heading -#: src/include/nis_server/slaves.rb:112 +#. To translators: popup dialog heading +#: src/include/nis_server/slaves.rb:112 msgid "Edit slave" msgstr "보조서버 편집" -#. To translators: label message -#: src/include/nis_server/slaves.rb:145 +#. To translators: label message +#: src/include/nis_server/slaves.rb:145 msgid "Scanning for hosts on this LAN..." msgstr "이 LAN상에서 호스트 검색중..." -#. help text 1/1 -#: src/include/nis_server/slaves.rb:175 -msgid "" -"<p>Here, enter the names of hosts to configure as NIS server slaves. Use " -"<i>Add</i> to add a new one, <i>Edit</i> to change an existing entry, and " -"<i>Delete</i> to remove an entry.</p>" -msgstr "" -"<p>이곳에 NIS 보조 서버로 구성하려는 호스트의 이름을 입력하십시오. 새 호스트" -"를 입력하려면 <i>추가</i>를, 기존의 엔트리를 변경하려면 <i>편집</i>을, 그리" -"고 엔트리를 제거하려면 <i>삭제</i>를 사용하십시오</p>" +#. help text 1/1 +#: src/include/nis_server/slaves.rb:175 +msgid "<p>Here, enter the names of hosts to configure as NIS server slaves. Use <i>Add</i> to add a new one, <i>Edit</i> to change an existing entry, and <i>Delete</i> to remove an entry.</p>" +msgstr "<p>이곳에 NIS 보조 서버로 구성하려는 호스트의 이름을 입력하십시오. 새 호스트를 입력하려면 <i>추가</i>를, 기존의 엔트리를 변경하려면 <i>편집</i>을, 그리고 엔트리를 제거하려면 <i>삭제</i>를 사용하십시오</p>" -#. To translators: selection box label -#: src/include/nis_server/slaves.rb:195 src/include/nis_server/slaves.rb:234 -#: src/include/nis_server/slaves.rb:250 src/include/nis_server/slaves.rb:263 +#. To translators: selection box label +#: src/include/nis_server/slaves.rb:195 src/include/nis_server/slaves.rb:234 +#: src/include/nis_server/slaves.rb:250 src/include/nis_server/slaves.rb:263 msgid "&Slaves" msgstr "보조 서버(&S)" -#. To translators: dialog label -#: src/include/nis_server/slaves.rb:204 +#. To translators: dialog label +#: src/include/nis_server/slaves.rb:204 msgid "NIS Master Server Slaves Setup" msgstr "NIS 주서버 - 보조 서버 설정" -#. To translators: ContinueCancel Popup headline -#: src/include/nis_server/ui.rb:78 +#. To translators: ContinueCancel Popup headline +#: src/include/nis_server/ui.rb:78 msgid "Finish" msgstr "완료" -#. To translators: ContinueCancel Popup -#: src/include/nis_server/ui.rb:80 +#. To translators: ContinueCancel Popup +#: src/include/nis_server/ui.rb:80 msgid "Really save configuration ?" msgstr "설정을 저장하시겠습니까?" -#. To translators: YesNo Popup headline -#: src/include/nis_server/ui.rb:92 +#. To translators: YesNo Popup headline +#: src/include/nis_server/ui.rb:92 msgid "Exit" msgstr "종료" -#. To translators: YesNo Popup -#: src/include/nis_server/ui.rb:94 +#. To translators: YesNo Popup +#: src/include/nis_server/ui.rb:94 msgid "Really exit configuration without saving ?" msgstr "정말로 저장하지 않고 끝내시겠습니까?" -#. To translators: popup label -#: src/include/nis_server/ui.rb:106 +#. To translators: popup label +#: src/include/nis_server/ui.rb:106 msgid "Error details" msgstr "세부 오류들" -#. To translators: popup label -#: src/include/nis_server/ui.rb:121 +#. To translators: popup label +#: src/include/nis_server/ui.rb:121 msgid "" "Error during configuration:\n" "%1" @@ -512,13 +489,13 @@ "구성중 오류발생:\n" "%1" -#. To translators: Error popup -#: src/include/nis_server/ui.rb:130 +#. To translators: Error popup +#: src/include/nis_server/ui.rb:130 msgid "&Details" msgstr "세부 사항(&D)" -#. help text 1/2 -#: src/include/nis_server/what.rb:57 +#. help text 1/2 +#: src/include/nis_server/what.rb:57 msgid "" "<p>Select whether to configure the NIS server as a <b>master</b> or a\n" "<b>slave</b> or not to configure a NIS server.</p>\n" @@ -526,219 +503,217 @@ "<p> <b>주서버</b>나 <b>보조 서버</b>로 NIS서버를 구성할 것인지,\n" "NIS 서버를 구성하지 않을 것인지를 선택해야합니다.</p>\n" -#. help text 2/2 -#: src/include/nis_server/what.rb:73 +#. help text 2/2 +#: src/include/nis_server/what.rb:73 msgid "" "<p>The NIS server package will be <b>installed</b> first if you want to\n" "configure it.</p>" -msgstr "" -"<p>NIS를 구성하기를 원한다면 NIS 서버 패키지가 먼저 <b> 설치</b>될 것입니다." -"</p>" +msgstr "<p>NIS를 구성하기를 원한다면 NIS 서버 패키지가 먼저 <b> 설치</b>될 것입니다.</p>" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:81 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:81 msgid "No NIS Software is installed." msgstr "NIS 소프트웨어가 설치되지 않았습니다." -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:90 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:90 msgid "Install and set up an NIS &Master Server" msgstr "설치하고 NIS주 서버 설정(&M)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:92 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:92 msgid "Install and set up an NIS &Slave Server" msgstr "설치하고 NIS 보조 서버 설정(&S)" -#. To translators: label in the dialog -#. To translators: checkbox label -#: src/include/nis_server/what.rb:94 src/include/nis_server/what.rb:150 +#. To translators: label in the dialog +#. To translators: checkbox label +#: src/include/nis_server/what.rb:94 src/include/nis_server/what.rb:150 msgid "&Do nothing and leave set up" msgstr "아무 일도 하지않고 설정 종료(&D)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:100 src/include/nis_server/what.rb:137 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:100 src/include/nis_server/what.rb:137 msgid "NIS Software is installed." msgstr "NIS 소프트웨어가 설치되었습니다." -#. To translators: part of the label in the dialog -#: src/include/nis_server/what.rb:104 +#. To translators: part of the label in the dialog +#: src/include/nis_server/what.rb:104 msgid "Master" msgstr "주" -#. To translators: part of the label in the dialog -#: src/include/nis_server/what.rb:106 +#. To translators: part of the label in the dialog +#: src/include/nis_server/what.rb:106 msgid "Slave" msgstr "보조" -#. To translators: label in the dialog, %1 is Master or Slave above -#: src/include/nis_server/what.rb:113 +#. To translators: label in the dialog, %1 is Master or Slave above +#: src/include/nis_server/what.rb:113 msgid "A NIS %1 Server is configured." msgstr "NIS %1 서버가 구성되었습니다." -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:121 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:121 msgid "Reconfigure NIS &Master Server" msgstr "NIS 주 서버 재구성(&M)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:123 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:123 msgid "Change to NIS &Master Server" msgstr "NIS 주서버 변경(&M)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:125 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:125 msgid "Reconfigure NIS &Slave Server" msgstr "NIS 보조 서버 재구성(&S)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:127 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:127 msgid "Change to NIS &Slave Server" msgstr "NIS 보조 서버 변경(&S)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:132 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:132 msgid "&Deactivate any NIS server configuration" msgstr "NIS 서버 설정 비활성화(&D)" -#. To translators: checkbox label -#: src/include/nis_server/what.rb:146 +#. To translators: checkbox label +#: src/include/nis_server/what.rb:146 msgid "Create NIS &Master Server" msgstr "NIS 주서버 생성(&M)" -#. To translators: checkbox label -#: src/include/nis_server/what.rb:148 +#. To translators: checkbox label +#: src/include/nis_server/what.rb:148 msgid "Create NIS &Slave Server" msgstr "NIS 보조 서버 생성(&S)" -#. To translators: label in the dialog -#: src/include/nis_server/what.rb:155 +#. To translators: label in the dialog +#: src/include/nis_server/what.rb:155 msgid "Current status:" msgstr "현재 상태: " -#. To translators: frame label -#: src/include/nis_server/what.rb:207 +#. To translators: frame label +#: src/include/nis_server/what.rb:207 msgid "Select what you want to do" msgstr "원하는 것을 선택하십시오." -#. To translators: dialog label -#: src/include/nis_server/what.rb:213 +#. To translators: dialog label +#: src/include/nis_server/what.rb:213 msgid "Network Information Service (NIS) Server Setup" msgstr "네트워크 정보 서비스(NIS) 서버 설정" -#. Translators: dialog caption -#: src/include/nis_server/wizards.rb:134 +#. Translators: dialog caption +#: src/include/nis_server/wizards.rb:134 msgid "NIS Server Configuration" msgstr "NFS 서버 구성" -#. label -#: src/include/nis_server/wizards.rb:136 +#. label +#: src/include/nis_server/wizards.rb:136 msgid "Initializing..." msgstr "초기화 중..." -#. help text 1/1 -#: src/modules/NisServer.rb:192 +#. help text 1/1 +#: src/modules/NisServer.rb:192 msgid "<p>Please wait while reading the configuration.</p>" msgstr "<p>설정을 저장하는 동안 잠시 기다려주십시오.</p>" -#. dialog heading -#: src/modules/NisServer.rb:194 +#. dialog heading +#: src/modules/NisServer.rb:194 msgid "Initializing NIS server setup" msgstr "NIS 서버 설정 초기화중" -#. To translators: progress label %1 is filename -#: src/modules/NisServer.rb:220 +#. To translators: progress label %1 is filename +#: src/modules/NisServer.rb:220 msgid "Load '%1' file" msgstr "'%1' 파일 로드" -#. Trans: progress label -#: src/modules/NisServer.rb:224 +#. Trans: progress label +#: src/modules/NisServer.rb:224 msgid "Determine running services" msgstr "실행중인 서비스 확인" -#. Trans: progress label -#: src/modules/NisServer.rb:226 +#. Trans: progress label +#: src/modules/NisServer.rb:226 msgid "Determine server type" msgstr "서버 타입 결정" -#. progress stage label -#: src/modules/NisServer.rb:228 +#. progress stage label +#: src/modules/NisServer.rb:228 msgid "Read firewall settings" msgstr "방화벽 구성 읽기" -#. To translators: progress label %1 is filename -#: src/modules/NisServer.rb:234 +#. To translators: progress label %1 is filename +#: src/modules/NisServer.rb:234 msgid "Loading '%1'..." msgstr "'%1' 로딩중..." -#. Trans: progress label -#: src/modules/NisServer.rb:238 +#. Trans: progress label +#: src/modules/NisServer.rb:238 msgid "Determining running services..." msgstr "실행 중인 서비스 확인 중..." -#. Trans: progress label -#: src/modules/NisServer.rb:240 +#. Trans: progress label +#: src/modules/NisServer.rb:240 msgid "Determining server type..." msgstr "서버 유형 확인 중..." -#. progress step label -#: src/modules/NisServer.rb:242 +#. progress step label +#: src/modules/NisServer.rb:242 msgid "Reading firewall settings..." msgstr "방화벽 설정 불러오는 중..." -#. Trans: progress label -#. progress step -#: src/modules/NisServer.rb:244 src/modules/NisServer.rb:523 +#. Trans: progress label +#. progress step +#: src/modules/NisServer.rb:244 src/modules/NisServer.rb:523 msgid "Done." msgstr "완료." -#. help text 1/1 -#: src/modules/NisServer.rb:495 +#. help text 1/1 +#: src/modules/NisServer.rb:495 msgid "<p>Please wait until the configuration is saved.</p>" msgstr "<p>설정이 저장될 때까지 잠시 기다려주십시오.</p>" -#. dialog heading -#: src/modules/NisServer.rb:497 +#. dialog heading +#: src/modules/NisServer.rb:497 msgid "Saving NIS server setup" msgstr "NIS 서버 설정 저장중" -#. progress bar stage -#: src/modules/NisServer.rb:512 +#. progress bar stage +#: src/modules/NisServer.rb:512 msgid "Save firewall settings" msgstr "방화벽 설정 저장" -#. progress step -#: src/modules/NisServer.rb:521 +#. progress step +#: src/modules/NisServer.rb:521 msgid "Saving firewall settings..." msgstr "방화벽 설정 저장 중..." -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:574 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:574 msgid "Error while removing %1\n" msgstr "%1을 제거하는 중에 문제가 발생하였습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:601 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:601 msgid "Directory %1 cannot be created.\n" msgstr "디렉토리 %1을 생성할 수 없습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:632 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:632 msgid "Cannot get list of maps.\n" msgstr "맵 목록을 받을 수 없습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:663 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:663 msgid "Error while retrieving %1 map from master.\n" msgstr "주 서버로부터 %1 맵을 받는 중에 문제가 발생했습니다\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:674 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:674 msgid "Could not get list with slaves.\n" msgstr "보조 서버로부터 목록을 받을 수 없습니다.\n" -#. To translators: message in the popup dialog, %1 is hostname -#: src/modules/NisServer.rb:707 +#. To translators: message in the popup dialog, %1 is hostname +#: src/modules/NisServer.rb:707 msgid "" "Hostname of this host (%1)\n" "is not listed in the master's list.\n" @@ -746,165 +721,165 @@ "이 호스트(%1)의 호스트 이름이\n" "마스터 목록에 열거되어 있지 않습니다.\n" -#. To translators: message in the popup dialog -#. To translators: message in the popup dialog -#. To translators: message in the popup dialog -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:732 src/modules/NisServer.rb:749 -#: src/modules/NisServer.rb:796 src/modules/NisServer.rb:804 +#. To translators: message in the popup dialog +#. To translators: message in the popup dialog +#. To translators: message in the popup dialog +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:732 src/modules/NisServer.rb:749 +#: src/modules/NisServer.rb:796 src/modules/NisServer.rb:804 msgid "Error saving file %1\n" msgstr "파일 %1을 저장하는 중에 문제가 발생했습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:762 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:762 msgid "Error setting up domain name\n" msgstr "도메인명을 설정하는 중에 문제가 발생했습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:787 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:787 msgid "Error setting up variable %1\n" msgstr "변수 %1을 설정하는 중에 문제가 발생했습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:847 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:847 msgid "Error while stopping %1 daemon\n" msgstr "%1 데몬을 종료하는 중에 문제가 발생했습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:858 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:858 msgid "Error while starting %1 daemon\n" msgstr "%1 데몬을 시작하는 중에 문제가 발생했습니다.\n" -#. error popup -#: src/modules/NisServer.rb:905 +#. error popup +#: src/modules/NisServer.rb:905 msgid "Error while creating an empty user database.\n" msgstr "빈 사용자 데이터베이스를 생성하는중에 문제가 발생했습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:927 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:927 msgid "Error while creating the ypservers map.\n" msgstr "ypservers 맵을 생성하는 중에 문제가 발생했습니다.\n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:946 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:946 msgid "Error while creating database.\n" msgstr "데이터베이스를 생성하는 중에 문제가 발생했습니다 \n" -#. To translators: message in the popup dialog -#: src/modules/NisServer.rb:973 +#. To translators: message in the popup dialog +#: src/modules/NisServer.rb:973 msgid "Error while configuring the client.\n" msgstr "클라이언트를 구성하는 중에 문제가 발생했습니다.\n" -#. To translators: progress label -#: src/modules/NisServer.rb:996 +#. To translators: progress label +#: src/modules/NisServer.rb:996 msgid "Remove /var/yp/%1" msgstr "/var/yp/%1 제거" -#. To translators: progress label -#: src/modules/NisServer.rb:1001 +#. To translators: progress label +#: src/modules/NisServer.rb:1001 msgid "Removing /var/yp/%1" msgstr "/var/yp/%1 제거중" -#. To translators: progress label -#: src/modules/NisServer.rb:1019 +#. To translators: progress label +#: src/modules/NisServer.rb:1019 msgid "Stop running daemons." msgstr "실행중인 데몬 중지" -#. To translators: progress label -#: src/modules/NisServer.rb:1021 +#. To translators: progress label +#: src/modules/NisServer.rb:1021 msgid "Stopping running daemons." msgstr "실행중인 데몬을 중지하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1038 +#. To translators: progress label +#: src/modules/NisServer.rb:1038 msgid "Get maps from master." msgstr "주서버로부터 맵을 가져옵니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1040 +#. To translators: progress label +#: src/modules/NisServer.rb:1040 msgid "Getting maps from master." msgstr "주서버로부터 맵을 가져오고 있습니다." -#. To translators: progress label -#. To translators: progress label -#: src/modules/NisServer.rb:1047 src/modules/NisServer.rb:1087 +#. To translators: progress label +#. To translators: progress label +#: src/modules/NisServer.rb:1047 src/modules/NisServer.rb:1087 msgid "Save hosts allowed to query server." msgstr "서버에 질의할 수 있는 호스트 저장" -#. To translators: progress label -#. To translators: progress label -#: src/modules/NisServer.rb:1049 src/modules/NisServer.rb:1089 +#. To translators: progress label +#. To translators: progress label +#: src/modules/NisServer.rb:1049 src/modules/NisServer.rb:1089 msgid "Saving hosts allowed to query server." msgstr "서버에 질의할 수 있는 호스트 목록을 저장하고 있습니다." -#. To translators: progress label -#. To translators: progress label -#: src/modules/NisServer.rb:1056 src/modules/NisServer.rb:1118 +#. To translators: progress label +#. To translators: progress label +#: src/modules/NisServer.rb:1056 src/modules/NisServer.rb:1118 msgid "Set config variables." msgstr "설정변수 설정" -#. To translators: progress label -#. To translators: progress label -#: src/modules/NisServer.rb:1058 src/modules/NisServer.rb:1120 +#. To translators: progress label +#. To translators: progress label +#: src/modules/NisServer.rb:1058 src/modules/NisServer.rb:1120 msgid "Setting config variables." msgstr "설정변수들을 저장하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1068 +#. To translators: progress label +#: src/modules/NisServer.rb:1068 msgid "Start daemon." msgstr "데몬 시작" -#. To translators: progress label -#: src/modules/NisServer.rb:1070 +#. To translators: progress label +#: src/modules/NisServer.rb:1070 msgid "Starting daemon." msgstr "데몬을 시작하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1103 +#. To translators: progress label +#: src/modules/NisServer.rb:1103 msgid "Save slaves." msgstr "보조서버 저장" -#. To translators: progress label -#: src/modules/NisServer.rb:1105 +#. To translators: progress label +#: src/modules/NisServer.rb:1105 msgid "Saving slaves." msgstr "보조서버를 저장하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1130 +#. To translators: progress label +#: src/modules/NisServer.rb:1130 msgid "Start daemons." msgstr "데몬 시작" -#. To translators: progress label -#: src/modules/NisServer.rb:1132 +#. To translators: progress label +#: src/modules/NisServer.rb:1132 msgid "Starting daemons." msgstr "데몬을 시작하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1142 +#. To translators: progress label +#: src/modules/NisServer.rb:1142 msgid "Create initial database." msgstr "초기 데이터베이스 생성" -#. To translators: progress label -#: src/modules/NisServer.rb:1144 +#. To translators: progress label +#: src/modules/NisServer.rb:1144 msgid "Creating database." msgstr "데이터베이스를 생성하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1161 +#. To translators: progress label +#: src/modules/NisServer.rb:1161 msgid "Start NIS client." msgstr "NIS 클라이언트 시작" -#. To translators: progress label -#: src/modules/NisServer.rb:1163 +#. To translators: progress label +#: src/modules/NisServer.rb:1163 msgid "Starting NIS client." msgstr "NIS 클라이언트를 시작하고 있습니다." -#. To translators: progress label -#: src/modules/NisServer.rb:1176 +#. To translators: progress label +#: src/modules/NisServer.rb:1176 msgid "Stop NIS client." msgstr "NIS 클라이언트 종료" -#. To translators: progress label -#: src/modules/NisServer.rb:1178 +#. To translators: progress label +#: src/modules/NisServer.rb:1178 msgid "Stopping NIS client." msgstr "NIS 클라이언트를 종료하고 있습니다." Modified: branches/SLE12-SP3/yast/ko/po/ntp-client.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/ntp-client.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/ntp-client.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,82 +14,63 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. progress step title -#: src/clients/ntp-client_finish.rb:37 +#. progress step title +#: src/clients/ntp-client_finish.rb:37 msgid "Writing NTP Configuration..." msgstr "NIS 구성을 쓰는 중..." -#. help text -#: src/clients/ntp-client_proposal.rb:90 -msgid "" -"<p>Press <b>Synchronize Now</b>, to get your system time set correctly using " -"the selected NTP server. If you want to make use of NTP permanently, enable " -"the <b>Save NTP Configuration</b> option</p>" -msgstr "" -"<p><b>지금 동기화</b>를 눌러 선택한 NTP 서버를 사용하여 시스템 시간을 올바르" -"게 설정합니다. NTP를 영구적으로 사용하려면 <b>NTP 구성 저장</b> 옵션을 선택합" -"니다.</p>" +#. help text +#: src/clients/ntp-client_proposal.rb:90 +msgid "<p>Press <b>Synchronize Now</b>, to get your system time set correctly using the selected NTP server. If you want to make use of NTP permanently, enable the <b>Save NTP Configuration</b> option</p>" +msgstr "<p><b>지금 동기화</b>를 눌러 선택한 NTP 서버를 사용하여 시스템 시간을 올바르게 설정합니다. NTP를 영구적으로 사용하려면 <b>NTP 구성 저장</b> 옵션을 선택합니다.</p>" -#: src/clients/ntp-client_proposal.rb:98 -msgid "" -"<p>Enabling <b>Run NTP as daemon</b> option, the NTP service will be started " -"as daemon. Otherwise the system time will be synchronized periodically. The " -"default interval is 15 min. You can change it after installation with the " -"<b>yast2 ntp-client module</b>.</p>" -msgstr "" -"<p><b>NTP를 데몬으로 실행</b> 옵션을 활성화하면 NTP 서비스가 데몬으로 시작됩" -"니다. 그렇지 않으면 시스템 시간이 정기적으로 동기화됩니다. 기본 간격은 15분입" -"니다. 설치 후에 <b>yast2 ntp-client module</b>을 사용하여 변경할 수 있습니다." -"</p>" +#: src/clients/ntp-client_proposal.rb:98 +msgid "<p>Enabling <b>Run NTP as daemon</b> option, the NTP service will be started as daemon. Otherwise the system time will be synchronized periodically. The default interval is 15 min. You can change it after installation with the <b>yast2 ntp-client module</b>.</p>" +msgstr "<p><b>NTP를 데몬으로 실행</b> 옵션을 활성화하면 NTP 서비스가 데몬으로 시작됩니다. 그렇지 않으면 시스템 시간이 정기적으로 동기화됩니다. 기본 간격은 15분입니다. 설치 후에 <b>yast2 ntp-client module</b>을 사용하여 변경할 수 있습니다.</p>" -#. help text, cont. -#: src/clients/ntp-client_proposal.rb:110 -msgid "" -"<p>Using the <b>Configure</b> button, open the advanced NTP configuration." +#. help text, cont. +#: src/clients/ntp-client_proposal.rb:110 +msgid "<p>Using the <b>Configure</b> button, open the advanced NTP configuration.</p>" msgstr "<p><b>구성</b> 버튼으로 고급 NTP 구성을 열 수 있습니다.</p>" -#. help text, cont. -#: src/clients/ntp-client_proposal.rb:119 -msgid "" -"<p>Synchronization with the NTP server can be done only when the network is " -"configured.</p>" -msgstr "" -"<p>네트워크를 구성해야만 NTP 서버와 동기화 작업을 수행할 수 있습니다.</p>" +#. help text, cont. +#: src/clients/ntp-client_proposal.rb:119 +msgid "<p>Synchronization with the NTP server can be done only when the network is configured.</p>" +msgstr "<p>네트워크를 구성해야만 NTP 서버와 동기화 작업을 수행할 수 있습니다.</p>" -#. translators: error popup -#: src/clients/ntp-client_proposal.rb:145 +#. translators: error popup +#: src/clients/ntp-client_proposal.rb:145 msgid "Invalid NTP server hostname %1" msgstr "잘못된 NTP 서버 호스트 이름 %1" -#. combo box label -#: src/clients/ntp-client_proposal.rb:243 +#. combo box label +#: src/clients/ntp-client_proposal.rb:243 msgid "&NTP Server Address" msgstr "NTP 서버 주소(&N)" -#. check box label -#: src/clients/ntp-client_proposal.rb:253 +#. check box label +#: src/clients/ntp-client_proposal.rb:253 msgid "&Run NTP as daemon" msgstr "NTP를 데몬으로 실행" -#. check box label -#: src/clients/ntp-client_proposal.rb:262 +#. check box label +#: src/clients/ntp-client_proposal.rb:262 msgid "&Save NTP Configuration" msgstr "NTP 구성 저장" -#. push button label -#: src/clients/ntp-client_proposal.rb:272 +#. push button label +#: src/clients/ntp-client_proposal.rb:272 msgid "S&ynchronize now" msgstr "지금 동기화" -#. push button label -#. bnc#449615: only simple config for inst-sys -#: src/clients/ntp-client_proposal.rb:276 +#. push button label +#. bnc#449615: only simple config for inst-sys +#: src/clients/ntp-client_proposal.rb:276 msgid "&Configure..." msgstr "구성(&N)..." -#. Otherwise, prompt user for confirming pkg installation -#: src/clients/ntp-client_proposal.rb:378 +#. Otherwise, prompt user for confirming pkg installation +#: src/clients/ntp-client_proposal.rb:378 msgid "" "Synchronization with NTP server is not possible\n" "without package %1 installed." @@ -97,19 +78,19 @@ "%1 패키지가 설치되어 있지 않으면 NTP 서버와\n" "동기화할 수 없습니다." -#. Only if network is running try to synchronize the ntp server -#: src/clients/ntp-client_proposal.rb:389 +#. Only if network is running try to synchronize the ntp server +#: src/clients/ntp-client_proposal.rb:389 msgid "Synchronizing with NTP server..." msgstr "NTP 서버와 동기화 중..." -#. update time widgets -#: src/clients/ntp-client_proposal.rb:437 +#. update time widgets +#: src/clients/ntp-client_proposal.rb:437 msgid "Connection to selected NTP server failed." msgstr "선택한 NTP 서버에 대한 연결이 실패했습니다." -#. Translators: yes-no popup, -#. ntpdate is a command, %1 is the server address -#: src/clients/ntp-client_proposal.rb:468 +#. Translators: yes-no popup, +#. ntpdate is a command, %1 is the server address +#: src/clients/ntp-client_proposal.rb:468 msgid "" "Test query to server '%1' failed.\n" "If server is not yet accessible or network is not configured\n" @@ -119,469 +100,467 @@ "아직 서버에 액세스할 수 없거나 네트워크가 구성되지 않은 경우\n" "'아니요'를 클릭하여 무시하십시오. NTP 서버 구성을 다시 확인하시겠습니까?" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:17 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:17 msgid "Undisciplined Local Clock (LOCAL)" msgstr "비정규 로컬 클럭(로컬)" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:24 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:24 msgid "Trak 8820 GPS Receiver" msgstr "Trak 8820 GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:30 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:30 msgid "PSTI/Traconex 1020 WWV/WWVH Receiver" msgstr "PSTI/Traconex 1020 WWV/WWVH Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:38 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:38 msgid "Spectracom WWVB and GPS Receivers" msgstr "Spectracom WWVB 및 GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:46 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:46 msgid "TrueTime GPS/GOES/OMEGA Receivers" msgstr "TrueTime GPS/GOES/OMEGA Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:54 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:54 msgid "IRIG Audio Decoder" msgstr "IRIG Audio Decoder" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:59 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:59 msgid "Radio CHU Audio Demodulator/Decoder" msgstr "Radio CHU Audio Demodulator/Decoder" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:67 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:67 msgid "Generic Reference Driver" msgstr "일반 참조 드라이버" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:73 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:73 msgid "Magnavox MX4200 GPS Receiver" msgstr "Magnavox MX4200 GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:79 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:79 msgid "Austron 2200A/2201A GPS Receivers" msgstr "Austron 2200A/2201A GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:87 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:87 msgid "Arbiter 1088A/B GPS Receiver" msgstr "Arbiter 1088A/B GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:93 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:93 msgid "KSI/Odetics TPRO/S IRIG Interface" msgstr "KSI/Odetics TPRO/S IRIG Interface" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:101 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:101 msgid "Leitch CSD 5300 Master Clock Controller" msgstr "Leitch CSD 5300 Master Clock Controller" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:109 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:109 msgid "EES M201 MSF Receiver" msgstr "EES M201 MSF Receiver" -#. local clock type name -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:115 -#: src/include/ntp-client/clocktypes.rb:175 +#. local clock type name +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:115 +#: src/include/ntp-client/clocktypes.rb:175 msgid "TrueTime generic receivers" msgstr "TrueTime 일반 수신기" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:121 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:121 msgid "Bancomm GPS/IRIG Receiver" msgstr "Bancomm GPS/IRIG Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:127 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:127 msgid "Datum Precision Time System" msgstr "Datum Precision Time System" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:133 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:133 msgid "NIST Modem Time Service" msgstr "NIST Modem Time Service" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:139 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:139 msgid "Heath WWV/WWVH Receiver" msgstr "Heath WWV/WWVH Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:145 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:145 msgid "Generic NMEA GPS Receiver" msgstr "Generic NMEA GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:151 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:151 msgid "TrueTime GPS-VME Interface" msgstr "TrueTime GPS-VME Interface" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:157 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:157 msgid "PPS Clock Discipline" msgstr "PPS Clock Discipline" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:163 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:163 msgid "PTB Modem Time Service" msgstr "PTB Modem Time Service" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:169 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:169 msgid "USNO Modem Time Service" msgstr "USNO Modem Time Service" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:181 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:181 msgid "Hewlett Packard 58503A GPS Receiver" msgstr "Hewlett Packard 58503A GPS Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:189 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:189 msgid "Arcron MSF Receiver" msgstr "Arcron MSF Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:195 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:195 msgid "Shared Memory Driver" msgstr "공유 메모리 드라이버" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:201 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:201 msgid "Trimble Navigation Palisade GPS" msgstr "Trimble Navigation Palisade GPS" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:209 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:209 msgid "Motorola UT Oncore GPS" msgstr "Motorola UT Oncore GPS" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:215 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:215 msgid "Rockwell Jupiter GPS" msgstr "Rockwell Jupiter GPS" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:221 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:221 msgid "Chrono-log K-series WWVB receiver" msgstr "Chrono-log K-series WWVB receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:229 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:229 msgid "Dumb Clock" msgstr "Dumb Clock" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:235 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:235 msgid "Ultralink WWVB Receivers" msgstr "Ultralink WWVB Receiver" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:241 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:241 msgid "Conrad Parallel Port Radio Clock" msgstr "Conrad Parallel Port Radio Clock" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:249 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:249 msgid "Radio WWV/H Audio Demodulator/Decoder" msgstr "Radio WWV/H Audio Demodulator/Decoder" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:257 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:257 msgid "Forum Graphic GPS Dating station" msgstr "Forum Graphic GPS Dating station" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:265 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:265 msgid "hopf GPS/DCF77 6021/komp for Serial Line" msgstr "hopf GPS/DCF77 6021/komp for Serial Line" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:273 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:273 msgid "hopf GPS/DCF77 6039 for PCI-Bus" msgstr "hopf GPS/DCF77 6039 for PCI-Bus" -#. local clock type name -#: src/include/ntp-client/clocktypes.rb:281 +#. local clock type name +#: src/include/ntp-client/clocktypes.rb:281 msgid "JJY Receivers" msgstr "JJY Receiver" -#. command line help text for NTP client module -#: src/include/ntp-client/commandline.rb:22 +#. command line help text for NTP client module +#: src/include/ntp-client/commandline.rb:22 msgid "NTP client configuration module." msgstr "NTP 클라이언트 구성 모듈입니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:32 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:32 msgid "Print the status of the NTP daemon" msgstr "NTP 데몬의 상태를 출력합니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:39 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:39 msgid "Print all configured synchronization relationships" msgstr "구성되어 있는 모든 동기화 관계를 출력합니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:46 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:46 msgid "Enable the NTP daemon" msgstr "NTP 데몬을 활성화합니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:53 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:53 msgid "Disable the NTP daemon" msgstr "NTP 데몬을 비활성화합니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:60 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:60 msgid "Add new synchronization relationship" msgstr "새 동기화 관계를 추가합니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:67 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:67 msgid "Edit existing synchronization relationship" msgstr "기존 동기화 관계를 편집합니다." -#. command line help text for an action -#: src/include/ntp-client/commandline.rb:74 +#. command line help text for an action +#: src/include/ntp-client/commandline.rb:74 msgid "Delete a synchronization relationship" msgstr "동기화 관계를 삭제합니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:82 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:82 msgid "The address of the server" msgstr "서버 주소입니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:89 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:89 msgid "The address of the peer" msgstr "피어 주소입니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:96 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:96 msgid "The address to which to broadcast" msgstr "브로드캐스트할 주소입니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:103 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:103 msgid "The address from which to accept broadcasts" msgstr "브로드캐스트를 허용할 주소입니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:110 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:110 msgid "The options of the relationship" msgstr "관계 옵션입니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:117 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:117 msgid "Options for clock driver calibration" msgstr "클럭 드라이버 보정 옵션입니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:124 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:124 msgid "Use the server for initial synchronization" msgstr "서버를 초기 동기화에 사용합니다." -#. command line help text for an option -#: src/include/ntp-client/commandline.rb:130 +#. command line help text for an option +#: src/include/ntp-client/commandline.rb:130 msgid "Do not use the server for initial synchronization" msgstr "서버를 초기 동기화에 사용하지 않습니다." -#. error report for command line -#: src/include/ntp-client/commandline.rb:190 +#. error report for command line +#: src/include/ntp-client/commandline.rb:190 msgid "The synchronization peer not specified." msgstr "동기화 피어를 지정하지 않았습니다." -#. error report for command line -#: src/include/ntp-client/commandline.rb:197 +#. error report for command line +#: src/include/ntp-client/commandline.rb:197 msgid "Specified synchronization peer not found." msgstr "지정한 동기화 피어를 찾을 수 없습니다." -#. status information for command line -#: src/include/ntp-client/commandline.rb:249 +#. status information for command line +#: src/include/ntp-client/commandline.rb:249 msgid "NTP daemon is enabled." msgstr "NTP 데몬이 활성화되었습니다." -#: src/include/ntp-client/commandline.rb:249 +#: src/include/ntp-client/commandline.rb:249 msgid "NTP daemon is disabled." msgstr "NTP 데몬이 비활성화되었습니다." -#. table cell, NTP relationship type -#. table cell, NTP relationship type -#: src/include/ntp-client/commandline.rb:262 -#: src/include/ntp-client/widgets.rb:542 +#. table cell, NTP relationship type +#. table cell, NTP relationship type +#: src/include/ntp-client/commandline.rb:262 +#: src/include/ntp-client/widgets.rb:542 msgid "Server" msgstr "서버" -#. table cell, NTP relationship type -#. table cell, NTP relationship type -#: src/include/ntp-client/commandline.rb:264 -#: src/include/ntp-client/widgets.rb:544 +#. table cell, NTP relationship type +#. table cell, NTP relationship type +#: src/include/ntp-client/commandline.rb:264 +#: src/include/ntp-client/widgets.rb:544 msgid "Peer" msgstr "피어" -#. table cell, NTP relationship type -#: src/include/ntp-client/commandline.rb:266 +#. table cell, NTP relationship type +#: src/include/ntp-client/commandline.rb:266 msgid "Broadcast" msgstr "브로드캐스트" -#. table cell, NTP relationship type -#: src/include/ntp-client/commandline.rb:268 +#. table cell, NTP relationship type +#: src/include/ntp-client/commandline.rb:268 msgid "Accepting Broadcasts" msgstr "브로드캐스트 허용" -#. table cell, %1 is integer 0-3 -#. table cell, %1 is integer 0-3 -#: src/include/ntp-client/commandline.rb:281 -#: src/include/ntp-client/widgets.rb:564 +#. table cell, %1 is integer 0-3 +#. table cell, %1 is integer 0-3 +#: src/include/ntp-client/commandline.rb:281 +#: src/include/ntp-client/widgets.rb:564 msgid "Unit Number: %1" msgstr "유닛 번호: %1" -#. table cell, NTP relationship type -#. table cell, NTP relationship type -#: src/include/ntp-client/commandline.rb:287 -#: src/include/ntp-client/widgets.rb:570 +#. table cell, NTP relationship type +#. table cell, NTP relationship type +#: src/include/ntp-client/commandline.rb:287 +#: src/include/ntp-client/widgets.rb:570 msgid "Local Radio Clock" msgstr "로컬 라디오 클럭" -#. command line error message -#: src/include/ntp-client/commandline.rb:335 +#. command line error message +#: src/include/ntp-client/commandline.rb:335 msgid "Reading the settings failed." msgstr "설정을 읽지 못했습니다." -#. frame label -#: src/include/ntp-client/dialogs.rb:99 +#. frame label +#: src/include/ntp-client/dialogs.rb:99 msgid "NTP Server Configuration" msgstr "NTP 서버 구성" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:112 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:112 msgid "NTP Configuration" msgstr "NTP 구성" -#. Main dialog -#. @return [Symbol] for wizard sequencer -#: src/include/ntp-client/dialogs.rb:184 +#. Main dialog +#. @return [Symbol] for wizard sequencer +#: src/include/ntp-client/dialogs.rb:184 msgid "General Settings" msgstr "일반 설정" -#: src/include/ntp-client/dialogs.rb:195 +#: src/include/ntp-client/dialogs.rb:195 msgid "Security Settings" msgstr "보안 설정" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:222 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:222 msgid "Advanced NTP Configuration" msgstr "고급 NTP 구성" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:253 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:253 msgid "New Synchronization" msgstr "새 동기화" -#. Server editing dialog -#. @return [Symbol] for wizard sequencer -#: src/include/ntp-client/dialogs.rb:276 +#. Server editing dialog +#. @return [Symbol] for wizard sequencer +#: src/include/ntp-client/dialogs.rb:276 msgid "Server Settings" msgstr "서버 설정" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:292 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:292 msgid "NTP Server" msgstr "NTP 서버" -#. TRANSLATORS: frame label -#: src/include/ntp-client/dialogs.rb:320 -#: src/include/ntp-client/widgets.rb:1488 +#. TRANSLATORS: frame label +#: src/include/ntp-client/dialogs.rb:320 +#: src/include/ntp-client/widgets.rb:1488 msgid "Local NTP Server" msgstr "로컬 NTP 서버" -#. TRANSLATORS: frame label -#: src/include/ntp-client/dialogs.rb:364 -#: src/include/ntp-client/widgets.rb:1489 +#. TRANSLATORS: frame label +#: src/include/ntp-client/dialogs.rb:364 +#: src/include/ntp-client/widgets.rb:1489 msgid "Public NTP Server" msgstr "공공 NTP 서버" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:405 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:405 msgid "NTP Peer" msgstr "NTP 피어" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:442 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:442 msgid "Local Reference Clock" msgstr "로컬 참조 클럭" -#. dialog caption -#. table cell, NTP relationship type -#: src/include/ntp-client/dialogs.rb:475 -#: src/include/ntp-client/widgets.rb:546 +#. dialog caption +#. table cell, NTP relationship type +#: src/include/ntp-client/dialogs.rb:475 src/include/ntp-client/widgets.rb:546 msgid "Outgoing Broadcast" msgstr "나가는 브로드캐스트" -#. dialog caption -#. table cell, NTP relationship type -#: src/include/ntp-client/dialogs.rb:500 -#: src/include/ntp-client/widgets.rb:550 +#. dialog caption +#. table cell, NTP relationship type +#: src/include/ntp-client/dialogs.rb:500 src/include/ntp-client/widgets.rb:550 msgid "Incoming Broadcast" msgstr "들어오는 브로드캐스트" -#. text entry -#: src/include/ntp-client/dialogs.rb:524 +#. text entry +#: src/include/ntp-client/dialogs.rb:524 msgid "&Reference ID" msgstr "참조 ID(&R)" -#. int field -#: src/include/ntp-client/dialogs.rb:527 +#. int field +#: src/include/ntp-client/dialogs.rb:527 msgid "&Stratum" msgstr "계층(&S)" -#. text entry -#: src/include/ntp-client/dialogs.rb:532 +#. text entry +#: src/include/ntp-client/dialogs.rb:532 msgid "Calibration Offset 1" msgstr "보정 오프셋 1" -#. text entry -#: src/include/ntp-client/dialogs.rb:535 +#. text entry +#: src/include/ntp-client/dialogs.rb:535 msgid "Calibration Offset 2" msgstr "보정 오프셋 2" -#. check box -#: src/include/ntp-client/dialogs.rb:540 +#. check box +#: src/include/ntp-client/dialogs.rb:540 msgid "Flag &1" msgstr "플래그 &1" -#. check box -#: src/include/ntp-client/dialogs.rb:543 +#. check box +#: src/include/ntp-client/dialogs.rb:543 msgid "Flag &2" msgstr "플래그 &2" -#. check box -#: src/include/ntp-client/dialogs.rb:548 +#. check box +#: src/include/ntp-client/dialogs.rb:548 msgid "Flag &3" msgstr "플래그 &3" -#. check box -#: src/include/ntp-client/dialogs.rb:551 +#. check box +#: src/include/ntp-client/dialogs.rb:551 msgid "Flag &4" msgstr "플래그 &4" -#. dialog caption -#: src/include/ntp-client/dialogs.rb:559 +#. dialog caption +#: src/include/ntp-client/dialogs.rb:559 msgid "Clock Driver Calibration" msgstr "클럭 드라이버 보정" -#. Read dialog help 1/2 -#: src/include/ntp-client/helps.rb:18 +#. Read dialog help 1/2 +#: src/include/ntp-client/helps.rb:18 msgid "" "<p><b><big>Initializing NTP Client Configuration</big></b><br>\n" "Please wait...<br></p>" @@ -589,8 +568,8 @@ "<p><b><big>NTP 클라이언트 구성을 초기화하는 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>" -#. Read dialog help 2/2 -#: src/include/ntp-client/helps.rb:22 +#. Read dialog help 2/2 +#: src/include/ntp-client/helps.rb:22 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>" @@ -598,8 +577,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "유틸리티를 안전하게 중단하려면 <b>중단</b>을 눌르십시오.</p>" -#. Write dialog help 1/2 -#: src/include/ntp-client/helps.rb:27 +#. Write dialog help 1/2 +#: src/include/ntp-client/helps.rb:27 msgid "" "<p><b><big>Saving NTP Client Configuration</big></b><br>\n" "Please wait...<br></p>" @@ -607,8 +586,8 @@ "<p><b><big>NTP 클라이언트 구성을 저장하는 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>" -#. Write dialog help 2/2 -#: src/include/ntp-client/helps.rb:31 +#. Write dialog help 2/2 +#: src/include/ntp-client/helps.rb:31 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -618,13 +597,12 @@ "저장을 중단하려면 <b>중단</b>을 누르십시오.\n" "이 작업이 안전한지 여부를 알려 주는 대화 상자가 나타납니다.</p>" -#. help text 1/5, %d is a number of minutes -#: src/include/ntp-client/helps.rb:37 +#. help text 1/5, %d is a number of minutes +#: src/include/ntp-client/helps.rb:37 msgid "" "<p><b><big>Start NTP Daemon</big></b><br>\n" "Select whether to start the NTP daemon now and on every system boot. \n" -"Selecting <b>Synchronize without Daemon</b> the NTP daemon will not be " -"activated\n" +"Selecting <b>Synchronize without Daemon</b> the NTP daemon will not be activated\n" "and the system time will be set periodically by a <i>cron</i> script. \n" "The interval is configurable, by default it is %d minutes." msgstr "" @@ -634,8 +612,8 @@ "시스템 시간이 <i>cron</i> 스크립트에 따라 주기적으로 설정됩니다. \n" "간격은 구성 가능하고 기본값은 %d분입니다." -#. help text 2/5 -#: src/include/ntp-client/helps.rb:45 +#. help text 2/5 +#: src/include/ntp-client/helps.rb:45 msgid "" "<p><b><big>Chroot Jail</big></b><br>\n" "To run the NTP daemon in chroot jail, set\n" @@ -644,30 +622,23 @@ msgstr "" "<p><b><big>Chroot Jail</big></b><br>\n" "NTP 데몬을 chroot jail에서 실행하려면\n" -" <b>Chroot Jail에서 NTP 데몬 실행</b>을 설정합니다. chroot jail에서 아무 데몬" -"이나 시작하는\n" +" <b>Chroot Jail에서 NTP 데몬 실행</b>을 설정합니다. chroot jail에서 아무 데몬이나 시작하는\n" " 것이 더 안전하므로 이 방법을 권장합니다.</p>" -#: src/include/ntp-client/helps.rb:51 +#: src/include/ntp-client/helps.rb:51 msgid "" "<p><b><big>Secure NTP Configuration</big></b><br>\n" -"By selecting <b>Restrict NTP Service to Configured Servers Only</b>, remote " -"hosts will not be able to view and modify NTP settings on your \n" -"computer. The NTP service is restricted to servers in the <tt>/etc/ntp.conf file and to localhost.<br> \n" -"Access control flags can be fine-tuded in the servers overview table. This " -"option is not available if NTP is configured via DHCP.</p>\n" +"By selecting <b>Restrict NTP Service to Configured Servers Only</b>, remote hosts will not be able to view and modify NTP settings on your \n" +"computer. The NTP service is restricted to servers in the <tt>/etc/ntp.conf</tt> file and to localhost.<br> \n" +"Access control flags can be fine-tuded in the servers overview table. This option is not available if NTP is configured via DHCP.</p>\n" msgstr "" "<p><b><big>보안 NTP 구성</big></b><br>\n" -"<b>NTP 서비스를 구성된 서버로만 제한</b>을 선택하면 원격 호스트가 컴퓨터의 " -"NTP 설정을 \n" -"보고 수정할 수 없습니다. NTP 서비스는 <tt>/etc/ntp.conf</tt> 파일의 서버 및 " -"localhost로 제한됩니다.<br> \n" -"서버 개요 테이블에서 액세스 제어 플래그를 미세 조정할 수 있습니다. NTP가 DHCP" -"를 통해 구성된 경우에는 이 옵션을 사용할 수 없습니다.</p>\n" +"<b>NTP 서비스를 구성된 서버로만 제한</b>을 선택하면 원격 호스트가 컴퓨터의 NTP 설정을 \n" +"보고 수정할 수 없습니다. NTP 서비스는 <tt>/etc/ntp.conf</tt> 파일의 서버 및 localhost로 제한됩니다.<br> \n" +"서버 개요 테이블에서 액세스 제어 플래그를 미세 조정할 수 있습니다. NTP가 DHCP를 통해 구성된 경우에는 이 옵션을 사용할 수 없습니다.</p>\n" -#. help text 3/5 -#: src/include/ntp-client/helps.rb:60 +#. help text 3/5 +#: src/include/ntp-client/helps.rb:60 msgid "" "<p><b><big>Configuring via DHCP</big></b><br>\n" "To retrieve the information about NTP servers via the DHCP protocol from\n" @@ -681,13 +652,12 @@ " 설정합니다. NTP 서버에 대한 정보가 DHCP 서버에\n" " 의해 제공되는 경우 네트워크 관리자에게 문의하십시오.</p>" -#. help text 4/5 -#: src/include/ntp-client/helps.rb:68 +#. help text 4/5 +#: src/include/ntp-client/helps.rb:68 msgid "" "<p><b><big>Configured Servers</big></b><br>\n" "To adjust NTP servers, peers, local clocks, and NTP broadcasting,\n" -"select the appropriate line and click <b>Edit</b>. To add a new " -"synchronization\n" +"select the appropriate line and click <b>Edit</b>. To add a new synchronization\n" "peer, click <b>Add</b>. To delete an existing synchronization peer,\n" "select it and click <b>Delete</b>.</p>" msgstr "" @@ -697,8 +667,8 @@ "<b>추가</b>를 클릭하고 기존 동기화 피어를 삭제하려면 \n" "해당 항목을 선택한 다음 <b>삭제</b>를 클릭하십시오.</p>" -#. help text 5/5 -#: src/include/ntp-client/helps.rb:76 +#. help text 5/5 +#: src/include/ntp-client/helps.rb:76 msgid "" "<p><b><big>Display Log</big></b></p>\n" "<p>To view the logs of the NTP daemon, click <b>Display Log</b>.</p>\n" @@ -706,21 +676,19 @@ "<p><b><big>로그 표시</big></b></p>\n" "<p>NTP 데몬 로그를 보려면 <b>로그 표시</b> 버튼을 클릭하십시오.</p>\n" -#. help text to a button -#: src/include/ntp-client/helps.rb:81 +#. help text to a button +#: src/include/ntp-client/helps.rb:81 msgid "" "<p><b><big>Advanced configuration</big></b><br>\n" -"To configure this host to synchronize against multiple remote hosts or " -"against\n" +"To configure this host to synchronize against multiple remote hosts or against\n" "a locally connected clock, use <b>Advanced Configuration</b>." msgstr "" "<p><b><big>고급 구성</big></b><br>\n" -"이 호스트를 여러 원격 호스트 또는 로컬로 연결된 클럭에 대해 동기화되도록 구성" -"하려면\n" +"이 호스트를 여러 원격 호스트 또는 로컬로 연결된 클럭에 대해 동기화되도록 구성하려면\n" " <b>고급 구성</b>을 사용하십시오." -#. help text 1/4 -#: src/include/ntp-client/helps.rb:87 +#. help text 1/4 +#: src/include/ntp-client/helps.rb:87 msgid "" "<p><b><big>Clock Type</big></b><br>\n" "Select the driver for the clock to configure.</p>" @@ -728,8 +696,8 @@ "<p><b><big>클럭 형식</big></b><br>\n" "구성할 클럭 드라이버를 선택하십시오.</p>" -#. help text 2/4 -#: src/include/ntp-client/helps.rb:91 +#. help text 2/4 +#: src/include/ntp-client/helps.rb:91 msgid "" "<p><b><big>Unit Number</big></b><br>\n" "If you have multiple clocks of the same type, you must set\n" @@ -739,12 +707,11 @@ "같은 형식의 클럭을 여러 개 사용하는 경우에는\n" "<b>장치 번호</b>를 설정해야 합니다.</p>" -#. help text 3/4 -#: src/include/ntp-client/helps.rb:97 +#. help text 3/4 +#: src/include/ntp-client/helps.rb:97 msgid "" "<p><b><big>Device</big></b><br>\n" -"To make the clock work, it may be necessary to create a special symbolic " -"link to \n" +"To make the clock work, it may be necessary to create a special symbolic link to \n" "the device to which the clock is connected. To do this, check\n" "<b>Create Symlink</b> and set the <b>Device</b>. To browse for the device,\n" "click <b>Browse</b>.\n" @@ -754,14 +721,13 @@ "<p><b><big>장치</big></b><br>\n" "클럭을 작동시키려면 클럭이 연결된 장치에 대해 특수 심볼 링크를\n" " 만들어야 할 수 있습니다. 이렇게 하려면\n" -" <b>심볼 링크 만들기</b>를 선택하고 <b>장치</b>를 설정하십시오. 장치를 찾아보" -"려면\n" +" <b>심볼 링크 만들기</b>를 선택하고 <b>장치</b>를 설정하십시오. 장치를 찾아보려면\n" " <b>찾아보기</b>를 클릭하십시오.\n" " 일부 클럭 유형의 경우 심볼 링크를 만들 필요가 없거나\n" " 심볼 링크를 수동으로 만들어야 합니다.</p>" -#. help text 4/4 -#: src/include/ntp-client/helps.rb:107 +#. help text 4/4 +#: src/include/ntp-client/helps.rb:107 msgid "" "<p><b><big>Driver Calibration</big></b><br>\n" "To calibrate the clock driver, click <b>Driver Calibration</b>.</p>" @@ -769,8 +735,8 @@ "<p><b><big>드라이버 보정</big></b><br>\n" "클럭 드라이버를 보정하려면 <b>드라이버 보정</b>을 클릭하십시오.</p>" -#. help text 1/1, alt. 1 part 1/3 -#: src/include/ntp-client/helps.rb:112 +#. help text 1/1, alt. 1 part 1/3 +#: src/include/ntp-client/helps.rb:112 msgid "" "<p><b><big>Address of the NTP Server</big></b><br>\n" "To set the address of the NTP server, use the <b>Address</b> entry.\n" @@ -782,8 +748,8 @@ " NTP 서버를 찾으려면 네트워크 관리자 또는 인터넷 서비스 공급자에게\n" " 문의하십시오.</p>" -#. help text 1/1, alt. 1 part 2/3 -#: src/include/ntp-client/helps.rb:119 +#. help text 1/1, alt. 1 part 2/3 +#: src/include/ntp-client/helps.rb:119 msgid "" "<p><b><big>Selecting a Server</big></b><br>\n" "To select an NTP server from those found in the local network\n" @@ -795,8 +761,8 @@ " NTP 서버를 선택하려면 <b>선택</b>을 클릭하고\n" " <b>로컬 NTP 서버</b> 또는 <b>공공 NTP 서버</b>를 선택하십시오.</p>" -#. help text 1/1, alt. 1 part 3/3 -#: src/include/ntp-client/helps.rb:126 +#. help text 1/1, alt. 1 part 3/3 +#: src/include/ntp-client/helps.rb:126 msgid "" "<p><b><big>Testing Server Accessibility</big></b><br>\n" "To test if the selected server is up and responds properly,\n" @@ -806,8 +772,8 @@ "선택한 서버가 연결되어 있고 적절히 반응하는지 테스트하려면\n" " <b>테스트</b>를 클릭하십시오.</p>" -#. help text 1/1, alt. 2 -#: src/include/ntp-client/helps.rb:132 +#. help text 1/1, alt. 2 +#: src/include/ntp-client/helps.rb:132 msgid "" "<p><b><big>Address</big></b><br>\n" "To set the address of the host with which to synchronize mutually,\n" @@ -817,8 +783,8 @@ "상호 동기화할 호스트의 주소를 설정하려면 <b>주소</b>를\n" "사용하십시오.</p>" -#. help text 1/1, alt. 3 -#: src/include/ntp-client/helps.rb:138 +#. help text 1/1, alt. 3 +#: src/include/ntp-client/helps.rb:138 msgid "" "<p><b><big>Address</big></b><br>\n" "To set the address to which to broadcast, use the <b>Address</b>\n" @@ -828,8 +794,8 @@ "브로드캐스트할 주소를 설정하려면 <b>주소</b>\n" "텍스트 필드를 사용하십시오.</p>" -#. help text 1/1, alt. 4 -#: src/include/ntp-client/helps.rb:144 +#. help text 1/1, alt. 4 +#: src/include/ntp-client/helps.rb:144 msgid "" "<p><b><big>Address</big></b><br>\n" "To set the address from which to accept broadcast packets, use \n" @@ -839,13 +805,12 @@ "브로드캐스트 패킷을 허용할 주소를 설정하려면 <b>주소</b>를\n" "사용하십시오.</p>" -#. help text 2/4, was removed -#. help text 3/4, optional -#: src/include/ntp-client/helps.rb:152 +#. help text 2/4, was removed +#. help text 3/4, optional +#: src/include/ntp-client/helps.rb:152 msgid "" "<p><b><big>Options</big></b><br>\n" -"To fine-tune the synchronization source, enter the respective options in " -"the\n" +"To fine-tune the synchronization source, enter the respective options in the\n" "<b>Options</b> text field. For details, see\n" "<i>/usr/share/doc/packages/ntp-doc/confopt.htm</i>.</p>\n" msgstr "" @@ -854,12 +819,11 @@ "해당 옵션을 입력하십시오. 자세한 내용은\n" "<i>/usr/share/doc/packages/ntp-doc/confopt.htm</i>을 참조하십시오.</p>\n" -#: src/include/ntp-client/helps.rb:158 +#: src/include/ntp-client/helps.rb:158 msgid "" "<p><b><big>Access Control Options</big></b><br>\n" "Define the access control flags (<b><tt>restrict</tt></b> directive in\n" -"<i>/etc/ntp.conf</i>) for this server, indicating which types of actions the " -"remote\n" +"<i>/etc/ntp.conf</i>) for this server, indicating which types of actions the remote\n" "host can perform on your NTP daemon. By default, it is set to <i>notrap\n" "nomodify noquery</i>. This option is only available if you have checked the\n" "<b>Restrict NTP Service to Configured Servers Only</b> option in\n" @@ -868,14 +832,13 @@ "<p><b><big>액세스 제어 옵션</big></b><br>\n" "이 서버에 대한 액세스 제어 플래그(<i>/etc/ntp.conf</i>의 \n" "<b><tt>restrict</tt></b> 지시문)를 정의하여,\n" -"원격 호스트가 사용자의 NTP 데몬에 대해 수행할 수 있는 유형의 동작을 나타냅니" -"다.\n" +"원격 호스트가 사용자의 NTP 데몬에 대해 수행할 수 있는 유형의 동작을 나타냅니다.\n" "기본적으로 <i>notrap nomodify noquery</i>로 설정됩니다.\n" "이 옵션은 <b>보안 설정</b>에서 <b>NTP 서비스를 구성된 서버로만 제한</b>\n" "옵션을 선택한 경우에만 사용할 수 있습니다.</p>\n" -#. help text 1/6 -#: src/include/ntp-client/helps.rb:168 +#. help text 1/6 +#: src/include/ntp-client/helps.rb:168 msgid "" "<p><b><big>Synchronization Peer Type</big></b><br>\n" "Select the kind of synchronization peer to add here.</p>" @@ -883,8 +846,8 @@ "<p><b><big>동기화 피어 형식</big></b><br>\n" "여기에 추가할 동기화 피어 형식을 선택하십시오.</p>" -#. help text 2/6 -#: src/include/ntp-client/helps.rb:173 +#. help text 2/6 +#: src/include/ntp-client/helps.rb:173 msgid "" "<p>To add an NTP server to which to synchronize,\n" "select <b>Server</b>.</p>" @@ -892,8 +855,8 @@ "<p>동기화할 대상 NTP 서버를 추가하려면 \n" "<b>서버</b>를 선택하십시오.</p>" -#. help text 3/6 -#: src/include/ntp-client/helps.rb:177 +#. help text 3/6 +#: src/include/ntp-client/helps.rb:177 msgid "" "<p>To add an NTP peer to synchronize mutually, select\n" "<b>Peer</b>.</p>" @@ -901,8 +864,8 @@ "<p>상호 동기화할 NTP 피어 서버를 추가하려면 \n" "<b>피어</b>를 선택하십시오.</p>" -#. help text 4/6 -#: src/include/ntp-client/helps.rb:181 +#. help text 4/6 +#: src/include/ntp-client/helps.rb:181 msgid "" "<p>To configure a local clock connected directly to your computer,\n" "select <b>Radio Clock</b>.</p>" @@ -910,8 +873,8 @@ "<p>컴퓨터에 직접 연결된 로컬 클럭을 구성하려면 <b>라디오 클럭</b>을\n" "선택하십시오.</p>" -#. help text 5/6 -#: src/include/ntp-client/helps.rb:186 +#. help text 5/6 +#: src/include/ntp-client/helps.rb:186 msgid "" "<p>To broadcast time information through your network, select\n" "<b>Outgoing Broadcast</b>.</p>" @@ -919,18 +882,17 @@ "<p>네트워크를 통해 시간 정보를 브로드캐스트하려면\n" "<b>나가는 브로드캐스트</b>를 선택합니다.</p>" -#. help text 6/6 -#: src/include/ntp-client/helps.rb:191 +#. help text 6/6 +#: src/include/ntp-client/helps.rb:191 msgid "" "<p>To accept NTP packets broadcasted by other hosts on the network\n" "and use them for setting local time, select <b>Incoming Broadcast<b>.</p>" msgstr "" "<p>네트워크의 다른 호스트에서 브로드캐스트하는 NTP 패킷을 허용하고\n" -"이를 로컬 시간 설정에 사용하려면 <b>들어오는 브로드캐스트<b>를 선택합니다." +"이를 로컬 시간 설정에 사용하려면 <b>들어오는 브로드캐스트<b>를 선택합니다.</p>" -#. help text 1/5 -#: src/include/ntp-client/helps.rb:196 +#. help text 1/5 +#: src/include/ntp-client/helps.rb:196 msgid "" "<p><big><b>Server Location</b></big>\n" "Select if you want to find the NTP server in the local network or select\n" @@ -940,8 +902,8 @@ "로컬 네트워크에서 NTP 서버를 찾거나 알려진 NTP 서버 목록에서\n" " NTP 서버를 선택하려면 이 옵션을 선택합니다.</p>" -#. help text 2/5 -#: src/include/ntp-client/helps.rb:202 +#. help text 2/5 +#: src/include/ntp-client/helps.rb:202 msgid "" "<p><big><b>Finding Server in the Local\n" "Network</b></big><br>\n" @@ -955,20 +917,19 @@ " NTP 서버를 찾으려면 <b>찾아보기</b>를 클릭합니다.\n" " 그런 다음 발견된 서버 목록에서 서버를 선택합니다.</p>" -#. help text 3/5 -#: src/include/ntp-client/helps.rb:210 +#. help text 3/5 +#: src/include/ntp-client/helps.rb:210 msgid "" "<p><big><b>Selecting a Public NTP Server</b></big><br>\n" -"Select the NTP server to use from the <b>Public NTP Servers</b> list. To " -"display\n" +"Select the NTP server to use from the <b>Public NTP Servers</b> list. To display\n" "NTP servers only for a particular country, select it in <b>Country</b>.</p>" msgstr "" "<p><big><b>공공 NTP 서버 선택</b></big><br>\n" "<b>공공 NTP 서버</b> 목록에서 사용할 NTP 서버를 선택합니다. 특정\n" " 국가에 대한 NTP 서버만 표시하려면 <b>국가</b>에서 선택합니다.</p>" -#. help text 4/5 -#: src/include/ntp-client/helps.rb:216 +#. help text 4/5 +#: src/include/ntp-client/helps.rb:216 msgid "" "<p><big><b>Note</b></big><br>\n" "The listed NTP servers may not be available from any country, but only\n" @@ -988,26 +949,23 @@ " 또한 <i>http://www.eecis.udel.edu/~mills/ntp/servers.html</i>을 방문하여\n" " 자신에게 근접한 NTP를 찾아볼 수도 있습니다.</p>" -#. help text 5/5 -#: src/include/ntp-client/helps.rb:227 +#. help text 5/5 +#: src/include/ntp-client/helps.rb:227 msgid "" "<p><big><b>Testing Server Accessibility</b></big><br>\n" "To test if the selected server responds properly, click <b>Test</b>.</p>" msgstr "" "<p><big><b>서버 액세스 가능성 테스트</b></big><br>\n" -"선택한 서버가 적절히 반응하는지 테스트하려면 <b>테스트</b>를 클릭하십시오." +"선택한 서버가 적절히 반응하는지 테스트하려면 <b>테스트</b>를 클릭하십시오.</p>" -#. help text connected with checkbox: "Use Random Server from pool.ntp.org" -#. rwalter, please, correct it ;) -#: src/include/ntp-client/helps.rb:233 +#. help text connected with checkbox: "Use Random Server from pool.ntp.org" +#. rwalter, please, correct it ;) +#: src/include/ntp-client/helps.rb:233 msgid "" "<p><big><b>Use Random Servers</b></big><br>\n" "This service is offered by pool.ntp.org. If you select this option,\n" -"three different servers are added to the configuration. The server names " -"are\n" -"permanent, but they change their DNS records (IPs) every hour. This means " -"that\n" +"three different servers are added to the configuration. The server names are\n" +"permanent, but they change their DNS records (IPs) every hour. This means that\n" "your NTP client is synchronized with different servers every hour.</p>\n" msgstr "" "<p><big><b>랜덤 서버 사용</b></big><br>\n" @@ -1016,35 +974,30 @@ " 각 서버의 DNS 레코드(IP)는 매시간 변경됩니다. 즉 사용자의\n" " NTP 클라이언트가 매시간 서로 다른 서버와 동기화된다는 의미입니다.</p>\n" -#. help text 1/2 -#: src/include/ntp-client/helps.rb:247 +#. help text 1/2 +#: src/include/ntp-client/helps.rb:247 msgid "" "<p><big><b>Clock Driver Calibration</b></big><br>\n" -"The clock driver may need to be calibrated. In this dialog, various " -"calibration\n" -"options can be set. The meaning of particular options depends on the " -"particular\n" +"The clock driver may need to be calibrated. In this dialog, various calibration\n" +"options can be set. The meaning of particular options depends on the particular\n" "driver. Some drivers do not use all the options.</p>" msgstr "" "<p><big><b>클럭 드라이버 보정</b></big><br>\n" -"클럭 드라이버를 보정해야 할 수 있습니다. 이 대화 상자에서는 다양한 보정 옵션" -"을\n" +"클럭 드라이버를 보정해야 할 수 있습니다. 이 대화 상자에서는 다양한 보정 옵션을\n" "설정할 수 있습니다. 특정 옵션의 의미는 드라이버에 따라 다를 수 있습니다.\n" "일부 드라이버에 대해서는 옵션 중 일부만 사용할 수 있습니다.</p>" -#. help text 2/2 -#: src/include/ntp-client/helps.rb:254 +#. help text 2/2 +#: src/include/ntp-client/helps.rb:254 msgid "" "To learn more about available options, install the package\n" -"<i>ntp-doc</i> and see <i>/usr/share/doc/packages/ntp-doc/html/refclock.htm.</p>\n" +"<i>ntp-doc</i> and see <i>/usr/share/doc/packages/ntp-doc/html/refclock.htm</i>.</p>\n" msgstr "" "사용 가능한 옵션에 대해 자세히 알아보려면\n" -"<i>ntp-doc</i> 패키지를 설치하고 <i>/usr/share/doc/packages/ntp-doc/html/" -"refclock.htm</i>을 참조하십시오.</p>\n" +"<i>ntp-doc</i> 패키지를 설치하고 <i>/usr/share/doc/packages/ntp-doc/html/refclock.htm</i>을 참조하십시오.</p>\n" -#. yes-no popup -#: src/include/ntp-client/misc.rb:35 +#. yes-no popup +#: src/include/ntp-client/misc.rb:35 msgid "" "Really exit?\n" "All changes will be lost." @@ -1052,18 +1005,18 @@ "정말로 중단하시겠습니까?\n" "모든 변경사항을 잃게 될것입니다." -#. menubutton entry, try to keep short -#: src/include/ntp-client/widgets.rb:66 +#. menubutton entry, try to keep short +#: src/include/ntp-client/widgets.rb:66 msgid "Restart NTP Daemon" msgstr "NTP 데몬 다시 시작" -#. menubutton entry, try to keep short -#: src/include/ntp-client/widgets.rb:71 +#. menubutton entry, try to keep short +#: src/include/ntp-client/widgets.rb:71 msgid "Save Settings and Restart NTP Daemon" msgstr "설정 저장 및 NTP 데몬 다시 시작" -#. Do not display this warning if we use NetworkManager (#299666) -#: src/include/ntp-client/widgets.rb:178 +#. Do not display this warning if we use NetworkManager (#299666) +#: src/include/ntp-client/widgets.rb:178 msgid "" "Warning!\n" "\n" @@ -1077,8 +1030,8 @@ "시간이 오래 걸릴 수 있으며 데몬이 제대로 실행되지 않을 수\n" "있습니다." -#. TRANSLATORS: Popup error message -#: src/include/ntp-client/widgets.rb:237 +#. TRANSLATORS: Popup error message +#: src/include/ntp-client/widgets.rb:237 msgid "" "NTP server '%1' is not a valid hostname,\n" "fully qualified hostname, IPv4 address, or IPv6 address." @@ -1086,8 +1039,8 @@ "'%1' NTP 서버는 유효한 호스트 이름, 정규화된\n" " 호스트 이름, IPv4 주소 또는 IPv6 주소가 아닙니다." -#. if there is already some server defined -#: src/include/ntp-client/widgets.rb:509 +#. if there is already some server defined +#: src/include/ntp-client/widgets.rb:509 msgid "" "Enabling Random Servers from pool.ntp.org would\n" "replace the current NTP server.\n" @@ -1099,45 +1052,45 @@ " \n" " 현재 NTP 서버를 대체하시겠습니까?" -#. popup header -#: src/include/ntp-client/widgets.rb:1033 +#. popup header +#: src/include/ntp-client/widgets.rb:1033 msgid "Select the Device" msgstr "장치 선택" -#. selection box header -#. selection box header -#: src/include/ntp-client/widgets.rb:1097 -#: src/include/ntp-client/widgets.rb:1726 +#. selection box header +#. selection box header +#: src/include/ntp-client/widgets.rb:1097 +#: src/include/ntp-client/widgets.rb:1726 msgid "Public NTP &Servers" msgstr "공공 NTP 서버(&S)" -#. message report (no server selected) -#. report message -#: src/include/ntp-client/widgets.rb:1108 -#: src/include/ntp-client/widgets.rb:1187 +#. message report (no server selected) +#. report message +#: src/include/ntp-client/widgets.rb:1108 +#: src/include/ntp-client/widgets.rb:1187 msgid "Select an NTP server." msgstr "NTP 서버를 선택하십시오." -#. combo box item -#: src/include/ntp-client/widgets.rb:1135 +#. combo box item +#: src/include/ntp-client/widgets.rb:1135 msgid "All Countries" msgstr "모든 국가" -#. combo box header -#. combo box header -#: src/include/ntp-client/widgets.rb:1142 -#: src/include/ntp-client/widgets.rb:1716 +#. combo box header +#. combo box header +#: src/include/ntp-client/widgets.rb:1142 +#: src/include/ntp-client/widgets.rb:1716 msgid "&Country" msgstr "국가(&C)" -#. TRANSLATORS: Busy message -#: src/include/ntp-client/widgets.rb:1212 +#. TRANSLATORS: Busy message +#: src/include/ntp-client/widgets.rb:1212 msgid "Scanning for NTP servers on your network..." msgstr "네트워크에서 NTP 서버 검색 중..." -#. TRANSLATORS: Popup error - no NTP server has been found during scanning the network. -#. There is a very high possibility that is is because of running firewall. -#: src/include/ntp-client/widgets.rb:1227 +#. TRANSLATORS: Popup error - no NTP server has been found during scanning the network. +#. There is a very high possibility that is is because of running firewall. +#: src/include/ntp-client/widgets.rb:1227 msgid "" "No NTP server has been found on your network.\n" "This could be caused by a running SuSEfirewall2,\n" @@ -1147,304 +1100,304 @@ "이는 네트워크 검색을 차단할 수 있는 SuSEfirewall2가\n" " 실행되고 있기 때문일 수 있습니다." -#. TRANSLATORS: Popup error - no NTP server has been found during scanning the network. -#: src/include/ntp-client/widgets.rb:1236 +#. TRANSLATORS: Popup error - no NTP server has been found during scanning the network. +#: src/include/ntp-client/widgets.rb:1236 msgid "No NTP server has been found on your network." msgstr "네트워크에서 NTP 서버를 찾을 수 없습니다." -#. combo box label -#. table header -#: src/include/ntp-client/widgets.rb:1247 -#: src/include/ntp-client/widgets.rb:1512 +#. combo box label +#. table header +#: src/include/ntp-client/widgets.rb:1247 +#: src/include/ntp-client/widgets.rb:1512 msgid "Address" msgstr "주소" -#. popup message -#: src/include/ntp-client/widgets.rb:1305 +#. popup message +#: src/include/ntp-client/widgets.rb:1305 msgid "No server is selected." msgstr "서버를 선택하지 않았습니다." -#. text entry label -#: src/include/ntp-client/widgets.rb:1343 +#. text entry label +#: src/include/ntp-client/widgets.rb:1343 msgid "A&ddress" msgstr "주소(&D)" -#. push button label -#: src/include/ntp-client/widgets.rb:1352 +#. push button label +#: src/include/ntp-client/widgets.rb:1352 msgid "Ad&vanced Configuration" msgstr "고급 구성(&V)" -#. push button label -#: src/include/ntp-client/widgets.rb:1363 +#. push button label +#: src/include/ntp-client/widgets.rb:1363 msgid "&Driver Calibration" msgstr "드라이버 보정(&D)" -#: src/include/ntp-client/widgets.rb:1373 +#: src/include/ntp-client/widgets.rb:1373 msgid "&Interval of the Synchronization in Minutes" msgstr "동기화 간격(분)(&I)" -#. frame -#: src/include/ntp-client/widgets.rb:1384 +#. frame +#: src/include/ntp-client/widgets.rb:1384 msgid "Start NTP Daemon" msgstr "NTP 데몬 시작" -#. radio button -#: src/include/ntp-client/widgets.rb:1387 +#. radio button +#: src/include/ntp-client/widgets.rb:1387 msgid "Only &Manually" msgstr "수동으로만(&M)" -#. radio button -#: src/include/ntp-client/widgets.rb:1389 +#. radio button +#: src/include/ntp-client/widgets.rb:1389 msgid "&Synchronize without Daemon" msgstr "데몬 없이 동기화(&S)" -#. radio button -#: src/include/ntp-client/widgets.rb:1391 +#. radio button +#: src/include/ntp-client/widgets.rb:1391 msgid "Now and on &Boot" msgstr "지금 및 부팅 시(&B)" -#. check box -#: src/include/ntp-client/widgets.rb:1406 +#. check box +#: src/include/ntp-client/widgets.rb:1406 msgid "Run NTP Daemon in Chroot &Jail" msgstr "Chroot Jail에서 NTP 데몬 실행(&J)" -#. TRANSLATORS: -#: src/include/ntp-client/widgets.rb:1418 +#. TRANSLATORS: +#: src/include/ntp-client/widgets.rb:1418 msgid "&Restrict NTP Service to Configured Servers Only " msgstr "NTP 서비스를 구성된 서버로만 제한(&R)" -#. combo box item FIXME usability -#: src/include/ntp-client/widgets.rb:1430 +#. combo box item FIXME usability +#: src/include/ntp-client/widgets.rb:1430 msgid "Manual" msgstr "수동" -#. combo box item -#: src/include/ntp-client/widgets.rb:1432 +#. combo box item +#: src/include/ntp-client/widgets.rb:1432 msgid "Auto" msgstr "자동" -#. combo box item -#: src/include/ntp-client/widgets.rb:1434 +#. combo box item +#: src/include/ntp-client/widgets.rb:1434 msgid "Custom" msgstr "사용자 정의" -#: src/include/ntp-client/widgets.rb:1436 +#: src/include/ntp-client/widgets.rb:1436 msgid "&Runtime Configuration Policy" msgstr "런타임 구성 정책(&R)" -#. FIXME -#: src/include/ntp-client/widgets.rb:1444 +#. FIXME +#: src/include/ntp-client/widgets.rb:1444 msgid "&Custom Policy" msgstr "사용자 정의 정책(&C)" -#. check box -#: src/include/ntp-client/widgets.rb:1452 +#. check box +#: src/include/ntp-client/widgets.rb:1452 msgid "&Use Random Servers from pool.ntp.org" msgstr "pool.ntp.org에서 랜덤 서버 사용(&U)" -#. text entry label -#. text entry -#. combo box label -#: src/include/ntp-client/widgets.rb:1461 -#: src/include/ntp-client/widgets.rb:1479 -#: src/include/ntp-client/widgets.rb:1674 +#. text entry label +#. text entry +#. combo box label +#: src/include/ntp-client/widgets.rb:1461 +#: src/include/ntp-client/widgets.rb:1479 +#: src/include/ntp-client/widgets.rb:1674 msgid "&Address" msgstr "주소(&A)" -#. push button -#: src/include/ntp-client/widgets.rb:1486 +#. push button +#: src/include/ntp-client/widgets.rb:1486 msgid "&Select..." msgstr "선택(&S)..." -#. push button -#. push button -#. push button -#: src/include/ntp-client/widgets.rb:1497 -#: src/include/ntp-client/widgets.rb:1753 -#: src/include/ntp-client/widgets.rb:1764 +#. push button +#. push button +#. push button +#: src/include/ntp-client/widgets.rb:1497 +#: src/include/ntp-client/widgets.rb:1753 +#: src/include/ntp-client/widgets.rb:1764 msgid "&Test" msgstr "테스트(&T)" -#. table header -#: src/include/ntp-client/widgets.rb:1510 +#. table header +#: src/include/ntp-client/widgets.rb:1510 msgid "Synchronization Type" msgstr "동기화 유형" -#. push button -#: src/include/ntp-client/widgets.rb:1525 +#. push button +#: src/include/ntp-client/widgets.rb:1525 msgid "Display &Log..." msgstr "로그 표시(&L)..." -#. combo box label -#: src/include/ntp-client/widgets.rb:1550 +#. combo box label +#: src/include/ntp-client/widgets.rb:1550 msgid "Clock &Type" msgstr "클럭 형식(&T)" -#. int field -#: src/include/ntp-client/widgets.rb:1561 +#. int field +#: src/include/ntp-client/widgets.rb:1561 msgid "Unit &Number" msgstr "유닛 번호(&N)" -#. check box -#: src/include/ntp-client/widgets.rb:1571 +#. check box +#: src/include/ntp-client/widgets.rb:1571 msgid "Create &Symlink" msgstr "심볼 링크 만들기(&S)" -#. text entry -#: src/include/ntp-client/widgets.rb:1591 +#. text entry +#: src/include/ntp-client/widgets.rb:1591 msgid "&Device" msgstr "장치(&D)" -#. text entry label -#: src/include/ntp-client/widgets.rb:1616 +#. text entry label +#: src/include/ntp-client/widgets.rb:1616 msgid "Access Control Options" msgstr "액세스 제어 옵션" -#. radio button, NTP relationship type -#: src/include/ntp-client/widgets.rb:1628 +#. radio button, NTP relationship type +#: src/include/ntp-client/widgets.rb:1628 msgid "&Server" msgstr "서버(&S)" -#. radio button, NTP relationship type -#: src/include/ntp-client/widgets.rb:1630 +#. radio button, NTP relationship type +#: src/include/ntp-client/widgets.rb:1630 msgid "&Peer" msgstr "피어(&P)" -#. radio button, NTP relationship type -#: src/include/ntp-client/widgets.rb:1632 +#. radio button, NTP relationship type +#: src/include/ntp-client/widgets.rb:1632 msgid "&Radio Clock" msgstr "라디오 클럭(&R)" -#. radio button, NTP relationship type -#: src/include/ntp-client/widgets.rb:1634 +#. radio button, NTP relationship type +#: src/include/ntp-client/widgets.rb:1634 msgid "&Outgoing Broadcast" msgstr "나가는 브로드캐스트(&O)" -#. radio button, NTP relationship type -#: src/include/ntp-client/widgets.rb:1636 +#. radio button, NTP relationship type +#: src/include/ntp-client/widgets.rb:1636 msgid "&Incoming Broadcast" msgstr "들어오는 브로드캐스트(&I)" -#. frame -#: src/include/ntp-client/widgets.rb:1639 +#. frame +#: src/include/ntp-client/widgets.rb:1639 msgid "Type" msgstr "타입" -#. radio button -#: src/include/ntp-client/widgets.rb:1653 +#. radio button +#: src/include/ntp-client/widgets.rb:1653 msgid "Loc&al Network" msgstr "로컬 네트워크(&A)" -#. radio button -#: src/include/ntp-client/widgets.rb:1655 +#. radio button +#: src/include/ntp-client/widgets.rb:1655 msgid "&Public NTP Server" msgstr "공공 NTP 서버(&P)" -#. frame label -#: src/include/ntp-client/widgets.rb:1660 +#. frame label +#: src/include/ntp-client/widgets.rb:1660 msgid "NTP Server Location" msgstr "NTP 서버 위치" -#. push button -#: src/include/ntp-client/widgets.rb:1684 +#. push button +#: src/include/ntp-client/widgets.rb:1684 msgid "&Lookup" msgstr "찾아보기(&L)" -#. dialog caption -#: src/include/ntp-client/wizards.rb:179 +#. dialog caption +#: src/include/ntp-client/wizards.rb:179 msgid "NTP Client Configuration" msgstr "NTP 클라이언트 설정" -#. label -#: src/include/ntp-client/wizards.rb:181 +#. label +#: src/include/ntp-client/wizards.rb:181 msgid "Initializing ..." msgstr "초기화중..." -#. While calling "yast clone_system" it is possible that -#. the ntp server has not already been installed at that time. -#. (This would be done if yast2-ntp-client will be called in the UI) -#. In that case the error popup will not be shown. (bnc#889557) -#. SuSEFirewall::Write checks on its own whether there are pending -#. changes, so call it always. bnc#476951 -#. progress step -#. progress step -#: src/modules/NtpClient.rb:516 src/modules/NtpClient.rb:646 -#: src/modules/NtpClient.rb:1061 src/modules/NtpClient.rb:1085 +#. While calling "yast clone_system" it is possible that +#. the ntp server has not already been installed at that time. +#. (This would be done if yast2-ntp-client will be called in the UI) +#. In that case the error popup will not be shown. (bnc#889557) +#. SuSEFirewall::Write checks on its own whether there are pending +#. changes, so call it always. bnc#476951 +#. progress step +#. progress step +#: src/modules/NtpClient.rb:516 src/modules/NtpClient.rb:646 +#: src/modules/NtpClient.rb:1061 src/modules/NtpClient.rb:1085 msgid "Finished" msgstr "완료되었습니다." -#. summary string -#: src/modules/NtpClient.rb:729 +#. summary string +#: src/modules/NtpClient.rb:729 msgid "The NTP daemon starts when starting the system." msgstr "시스템을 시작할 때 NTP 데몬을 시작합니다." -#. summary string -#: src/modules/NtpClient.rb:735 +#. summary string +#: src/modules/NtpClient.rb:735 msgid "The NTP daemon does not start automatically." msgstr "NTP 데몬을 자동으로 시작하지 않습니다." -#. summary string, %1 is list of addresses -#: src/modules/NtpClient.rb:741 +#. summary string, %1 is list of addresses +#: src/modules/NtpClient.rb:741 msgid "Servers: %1" msgstr "서버들: %1" -#. summary string, %1 is list of addresses -#: src/modules/NtpClient.rb:745 +#. summary string, %1 is list of addresses +#: src/modules/NtpClient.rb:745 msgid "Radio Clocks: %1" msgstr "라디오 클럭들: %1" -#. summary string, %1 is list of addresses -#: src/modules/NtpClient.rb:749 +#. summary string, %1 is list of addresses +#: src/modules/NtpClient.rb:749 msgid "Peers: %1" msgstr "Peers: %1" -#. summary string, %1 is list of addresses -#: src/modules/NtpClient.rb:753 +#. summary string, %1 is list of addresses +#: src/modules/NtpClient.rb:753 msgid "Broadcast time information to: %1" msgstr "다음에 대한 브로드캐스트 시간 정보: %1" -#. summary string, %1 is list of addresses -#: src/modules/NtpClient.rb:757 +#. summary string, %1 is list of addresses +#: src/modules/NtpClient.rb:757 msgid "Accept broadcasted time information from: %1" msgstr "다음에서 브로드캐스트된 시간 정보 허용: %1" -#. summary string, FIXME -#: src/modules/NtpClient.rb:773 +#. summary string, FIXME +#: src/modules/NtpClient.rb:773 msgid "Combine static and DHCP configuration." msgstr "정적 및 DHCP 구성을 결합합니다." -#. summary string, FIXME -#: src/modules/NtpClient.rb:777 +#. summary string, FIXME +#: src/modules/NtpClient.rb:777 msgid "Static configuration only." msgstr "정적 구성만 해당됩니다." -#. summary string, FIXME: too generic! -#: src/modules/NtpClient.rb:780 +#. summary string, FIXME: too generic! +#: src/modules/NtpClient.rb:780 msgid "Custom configuration policy." msgstr "구성 정책을 사용자 정의합니다." -#. Handle UI of NTP server test answers -#. @param [String] server string host name or IP address of the NTP server -#. @param [Symbol] verbosity `no_ui: ..., `transient_popup: pop up while scanning, -#. `result_popup: also final pop up about the result -#. @return [Boolean] true if NTP server answers properly -#: src/modules/NtpClient.rb:838 +#. Handle UI of NTP server test answers +#. @param [String] server string host name or IP address of the NTP server +#. @param [Symbol] verbosity `no_ui: ..., `transient_popup: pop up while scanning, +#. `result_popup: also final pop up about the result +#. @return [Boolean] true if NTP server answers properly +#: src/modules/NtpClient.rb:838 msgid "Testing the NTP server..." msgstr "NTP 서버 테스트 중..." -#. message report - result of test of connection to NTP server -#: src/modules/NtpClient.rb:846 +#. message report - result of test of connection to NTP server +#: src/modules/NtpClient.rb:846 msgid "Server is reachable and responds properly." msgstr "서버가 연결되어 있고 적절히 반응합니다." -#. error message - result of test of connection to NTP server -#. report error instead of simple message (#306018) -#: src/modules/NtpClient.rb:850 +#. error message - result of test of connection to NTP server +#. report error instead of simple message (#306018) +#: src/modules/NtpClient.rb:850 msgid "Server is unreachable or does not respond properly." msgstr "서버가 연결되어 있지 않고 적절히 반응하지 않습니다." -#. if package is not installed (in the inst-sys, it is: bnc#399659) -#: src/modules/NtpClient.rb:868 +#. if package is not installed (in the inst-sys, it is: bnc#399659) +#: src/modules/NtpClient.rb:868 msgid "" "Cannot search for NTP server in local network\n" "without package %1 installed.\n" @@ -1452,65 +1405,65 @@ "%1 패키지가 설치되지 않은 로컬 네트워크에서는\n" "NTP 서버를 검색할 수 없습니다.\n" -#. Start a new progress for Read NTP Configuration -#: src/modules/NtpClient.rb:1046 +#. Start a new progress for Read NTP Configuration +#: src/modules/NtpClient.rb:1046 msgid "Initializing NTP Client Configuration" msgstr "NTP 클라이언트 설정을 초기화하는 중입니다." -#. progress stage -#: src/modules/NtpClient.rb:1051 +#. progress stage +#: src/modules/NtpClient.rb:1051 msgid "Read network configuration" msgstr "네트워크 구성 읽기" -#. progress stage -#: src/modules/NtpClient.rb:1053 +#. progress stage +#: src/modules/NtpClient.rb:1053 msgid "Read NTP settings" msgstr "NTP 설정 읽기" -#. progress step -#: src/modules/NtpClient.rb:1057 +#. progress step +#: src/modules/NtpClient.rb:1057 msgid "Reading network configuration..." msgstr "네트워크 설정을 불러오는 중입니다..." -#. progress step -#: src/modules/NtpClient.rb:1059 +#. progress step +#: src/modules/NtpClient.rb:1059 msgid "Reading NTP settings..." msgstr "NTP 설정 읽는 중..." -#. Start a new progress for Write NTP Configuration -#: src/modules/NtpClient.rb:1070 +#. Start a new progress for Write NTP Configuration +#: src/modules/NtpClient.rb:1070 msgid "Saving NTP Client Configuration" msgstr "NTP 클라이언트 설정을 저장하는 중입니다." -#. progress stage -#: src/modules/NtpClient.rb:1075 +#. progress stage +#: src/modules/NtpClient.rb:1075 msgid "Write NTP settings" msgstr "NTP 설정 기록" -#. progress stage -#: src/modules/NtpClient.rb:1077 +#. progress stage +#: src/modules/NtpClient.rb:1077 msgid "Restart NTP daemon" msgstr "NTP 데몬 다시 시작" -#. progress step -#: src/modules/NtpClient.rb:1081 +#. progress step +#: src/modules/NtpClient.rb:1081 msgid "Writing the settings..." msgstr "설정을 기록하고 있습니다." -#. progress step -#: src/modules/NtpClient.rb:1083 +#. progress step +#: src/modules/NtpClient.rb:1083 msgid "Restarting NTP daemon..." msgstr "NTP 데몬을 다시 시작하는 중..." -#. Writes sysconfig ntp policy and calls netconfig to update ntp. Report an -#. error if some of the call fails. -#. -#. @return [Boolean] true if write and update success -#: src/modules/NtpClient.rb:1149 +#. Writes sysconfig ntp policy and calls netconfig to update ntp. Report an +#. error if some of the call fails. +#. +#. @return [Boolean] true if write and update success +#: src/modules/NtpClient.rb:1149 msgid "Cannot update the dynamic configuration policy." msgstr "동적 구성 정책을 업데이트할 수 없습니다." -#. error report -#: src/modules/NtpClient.rb:1181 +#. error report +#: src/modules/NtpClient.rb:1181 msgid "Cannot restart the NTP daemon." msgstr "NTP 데몬을 다시 시작할 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/online-update-configuration.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/online-update-configuration.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/online-update-configuration.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,110 +14,110 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. support basic command-line output (bnc#439050) -#: src/clients/online_update_configuration.rb:59 +#. support basic command-line output (bnc#439050) +#: src/clients/online_update_configuration.rb:59 msgid "Online Update Configuration Module Help" msgstr "온라인 업데이트 구성 모듈 도움말" -#. inst_source was renamed to repositories (bnc#828139) -#: src/clients/online_update_configuration.rb:256 +#. inst_source was renamed to repositories (bnc#828139) +#: src/clients/online_update_configuration.rb:256 msgid "The registration module is not available." msgstr "등록 모듈을 사용할 수 없습니다." -#: src/clients/online_update_configuration.rb:257 +#: src/clients/online_update_configuration.rb:257 msgid "Please install yast2-registration and try again." msgstr "yast2-registration을 설치한 후 다시 해보십시오." -#. module title -#: src/include/online-update-configuration/OUCDialogs.rb:41 +#. module title +#: src/include/online-update-configuration/OUCDialogs.rb:41 msgid "Online Update Configuration" msgstr "온라인 업데이트 구성" -#. translators: (default), meaning: "Current Update Repository: http://xyz/ (default)" -#: src/include/online-update-configuration/OUCDialogs.rb:43 +#. translators: (default), meaning: "Current Update Repository: http://xyz/ (default)" +#: src/include/online-update-configuration/OUCDialogs.rb:43 msgid "(default)" msgstr "(기본값)" -#. translators: (none), meaning "Current Update Repository: (none)" -#: src/include/online-update-configuration/OUCDialogs.rb:45 +#. translators: (none), meaning "Current Update Repository: (none)" +#: src/include/online-update-configuration/OUCDialogs.rb:45 msgid "(none)" msgstr "(없음)" -#. frame title -#: src/include/online-update-configuration/OUCDialogs.rb:48 +#. frame title +#: src/include/online-update-configuration/OUCDialogs.rb:48 msgid "Update Repository" msgstr "리포지토리 업데이트" -#. frame title -#: src/include/online-update-configuration/OUCDialogs.rb:50 +#. frame title +#: src/include/online-update-configuration/OUCDialogs.rb:50 msgid "Automatic Online Update" msgstr "자동 온라인 업데이트" -#. translators: "Set Default" meaning: Set the Update Repository to the default one -#: src/include/online-update-configuration/OUCDialogs.rb:53 +#. translators: "Set Default" meaning: Set the Update Repository to the default one +#: src/include/online-update-configuration/OUCDialogs.rb:53 msgid "Set Default" msgstr "기본값 설정" -#. translators: a short button label called "Advanced" -#: src/include/online-update-configuration/OUCDialogs.rb:55 +#. translators: a short button label called "Advanced" +#: src/include/online-update-configuration/OUCDialogs.rb:55 msgid "Advanced" msgstr "고급" -#. for category filter -#: src/include/online-update-configuration/OUCDialogs.rb:58 +#. for category filter +#: src/include/online-update-configuration/OUCDialogs.rb:58 msgid "Filter by Category" msgstr "범주별 필터" -#. for category filter //translators: means: categories of patches -#: src/include/online-update-configuration/OUCDialogs.rb:60 +#. for category filter //translators: means: categories of patches +#: src/include/online-update-configuration/OUCDialogs.rb:60 msgid "Patch Categories" msgstr "패치 범주" -#: src/include/online-update-configuration/OUCDialogs.rb:62 +#: src/include/online-update-configuration/OUCDialogs.rb:62 msgid "enabled" msgstr "활성화" -#: src/include/online-update-configuration/OUCDialogs.rb:63 +#: src/include/online-update-configuration/OUCDialogs.rb:63 msgid "disabled" msgstr "비활성화" -#: src/include/online-update-configuration/OUCDialogs.rb:65 +#: src/include/online-update-configuration/OUCDialogs.rb:65 msgid "Edit Software Repositories" msgstr "소프트웨어 리포지토리 편집" -#: src/include/online-update-configuration/OUCDialogs.rb:66 +#: src/include/online-update-configuration/OUCDialogs.rb:66 msgid "Register for support and get update repository" msgstr "지원 등록 및 업데이트 리포지토리 가져오기" -#: src/include/online-update-configuration/OUCDialogs.rb:67 +#: src/include/online-update-configuration/OUCDialogs.rb:67 msgid "Send hardware information to the smolt project" msgstr "Smolt 프로젝트로 하드웨어 정보 전송" -#: src/include/online-update-configuration/OUCDialogs.rb:68 +#: src/include/online-update-configuration/OUCDialogs.rb:68 msgid "Interval" msgstr "간격" -#: src/include/online-update-configuration/OUCDialogs.rb:69 +#: src/include/online-update-configuration/OUCDialogs.rb:69 msgid "Skip Interactive Patches" msgstr "대화형 패치 건너뛰기" -#: src/include/online-update-configuration/OUCDialogs.rb:70 +#: src/include/online-update-configuration/OUCDialogs.rb:70 msgid "Agree with Licenses" msgstr "사용권 계약에 동의" -#: src/include/online-update-configuration/OUCDialogs.rb:71 +#: src/include/online-update-configuration/OUCDialogs.rb:71 msgid "Include Recommended Packages" msgstr "권장 패키지 포함" -#: src/include/online-update-configuration/OUCDialogs.rb:72 +#: src/include/online-update-configuration/OUCDialogs.rb:72 msgid "Use delta rpms" msgstr "델타 rpms 사용" -#: src/include/online-update-configuration/OUCDialogs.rb:73 +#: src/include/online-update-configuration/OUCDialogs.rb:73 msgid "Current Update Repository:" msgstr "현재 리포지토리 업데이트:" -#: src/include/online-update-configuration/OUCDialogs.rb:74 +#: src/include/online-update-configuration/OUCDialogs.rb:74 msgid "" "In order to add the default update repository\n" "you have to register this product." @@ -125,90 +125,77 @@ "기본 업데이트 리포지토리를 추가하려면\n" "이 프로젝트를 등록해야 합니다." -#: src/include/online-update-configuration/OUCDialogs.rb:77 +#: src/include/online-update-configuration/OUCDialogs.rb:77 msgid "Do you want to perform the registration now?" msgstr "지금 등록을 수행하시겠습니까?" -#: src/include/online-update-configuration/OUCDialogs.rb:81 +#: src/include/online-update-configuration/OUCDialogs.rb:81 msgid "<p>In <b>%1</b> the current update repository is shown.</p>" msgstr "<p><b>%1</b>에 현재 업데이트 리포지토리가 표시됩니다.</p>" -#: src/include/online-update-configuration/OUCDialogs.rb:85 +#: src/include/online-update-configuration/OUCDialogs.rb:85 msgid "<p>Press <b>%1</b> to use the default update repository.</p>" msgstr "<p>기본 업데이트 리포지토리를 사용하려면 <b>%1</b>을(를) 누릅니다.</p>" -#: src/include/online-update-configuration/OUCDialogs.rb:89 +#: src/include/online-update-configuration/OUCDialogs.rb:89 msgid "<p>Find related actions in the <b>%1</b> menu.</p>" msgstr "<p><b>%1</b> 메뉴에서 관련 동작을 찾습니다.</p>" -#: src/include/online-update-configuration/OUCDialogs.rb:93 +#: src/include/online-update-configuration/OUCDialogs.rb:93 msgid "<p>In <b>%1</b> set up the automatic online update.</p>" msgstr "<p><b>%1</b>에서 자동 온라인 업데이트를 설정합니다.</p>" -#: src/include/online-update-configuration/OUCDialogs.rb:97 -msgid "" -"<p>Select an update interval and specify if interactive patches should be " -"ignored and if licenses should be automatically agreed with.</p>" -msgstr "" -"<p>업데이트 간격을 선택하고 대화식 패치의 무시 여부 및 라이센스 자동 동의 여" -"부를 지정합니다.</p>" +#: src/include/online-update-configuration/OUCDialogs.rb:97 +msgid "<p>Select an update interval and specify if interactive patches should be ignored and if licenses should be automatically agreed with.</p>" +msgstr "<p>업데이트 간격을 선택하고 대화식 패치의 무시 여부 및 라이센스 자동 동의 여부를 지정합니다.</p>" -#: src/include/online-update-configuration/OUCDialogs.rb:102 -msgid "" -"<p>All packages that are recommended by an updated package will be installed " -"when <b>%1</b> is enabled.</p>" -msgstr "" -"<p><b>%1</b>을(를) 사용할 때 업데이트된 패키지에서 권장하는 모든 패키지가 설" -"치됩니다.</p>" +#: src/include/online-update-configuration/OUCDialogs.rb:102 +msgid "<p>All packages that are recommended by an updated package will be installed when <b>%1</b> is enabled.</p>" +msgstr "<p><b>%1</b>을(를) 사용할 때 업데이트된 패키지에서 권장하는 모든 패키지가 설치됩니다.</p>" -#: src/include/online-update-configuration/OUCDialogs.rb:108 -msgid "" -"<p>Category filter for patches can be configured in the section <b>%1</b>. " -"Only patches of the listed categories will be installed. Others will be " -"skipped.</p>" -msgstr "" -"<p>패치에 대한 범주 필터는 <b>%1</b> 섹션에서 구성할 수 있습니다. 나열된 범주" -"의 패치만 설치되고 다른 패치는 건너뜁니다.</p>" +#: src/include/online-update-configuration/OUCDialogs.rb:108 +msgid "<p>Category filter for patches can be configured in the section <b>%1</b>. Only patches of the listed categories will be installed. Others will be skipped.</p>" +msgstr "<p>패치에 대한 범주 필터는 <b>%1</b> 섹션에서 구성할 수 있습니다. 나열된 범주의 패치만 설치되고 다른 패치는 건너뜁니다.</p>" -#. cache the base product details -#: src/modules/OnlineUpdateConfiguration.rb:73 +#. cache the base product details +#: src/modules/OnlineUpdateConfiguration.rb:73 msgid "daily" msgstr "매일" -#: src/modules/OnlineUpdateConfiguration.rb:74 +#: src/modules/OnlineUpdateConfiguration.rb:74 msgid "weekly" msgstr "매주" -#: src/modules/OnlineUpdateConfiguration.rb:75 +#: src/modules/OnlineUpdateConfiguration.rb:75 msgid "monthly" msgstr "매달" -#. translators: this name is a (technical) category for an update package -#: src/modules/OnlineUpdateConfiguration.rb:82 +#. translators: this name is a (technical) category for an update package +#: src/modules/OnlineUpdateConfiguration.rb:82 msgid "Packagemanager and YaST" msgstr "패키지 관리자 및 YaST" -#. translators: this name is a (technical) category for an update package -#: src/modules/OnlineUpdateConfiguration.rb:87 +#. translators: this name is a (technical) category for an update package +#: src/modules/OnlineUpdateConfiguration.rb:87 msgid "Security" msgstr "보안" -#. translators: this name is a (technical) category for an update package -#: src/modules/OnlineUpdateConfiguration.rb:92 +#. translators: this name is a (technical) category for an update package +#: src/modules/OnlineUpdateConfiguration.rb:92 msgid "Recommended" msgstr "추천" -#. translators: this name is a (technical) category for an update package -#: src/modules/OnlineUpdateConfiguration.rb:97 +#. translators: this name is a (technical) category for an update package +#: src/modules/OnlineUpdateConfiguration.rb:97 msgid "Optional" msgstr "선택 사항" -#. translators: this name is a (technical) category for an update package: Document, meaning Documentation -#: src/modules/OnlineUpdateConfiguration.rb:102 +#. translators: this name is a (technical) category for an update package: Document, meaning Documentation +#: src/modules/OnlineUpdateConfiguration.rb:102 msgid "Document" msgstr "문서" -#. translators: this name is a (technical) category for an update package -#: src/modules/OnlineUpdateConfiguration.rb:107 +#. translators: this name is a (technical) category for an update package +#: src/modules/OnlineUpdateConfiguration.rb:107 msgid "Other" msgstr "기타" Modified: branches/SLE12-SP3/yast/ko/po/online-update.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/online-update.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/online-update.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,18 +14,18 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. nothing to do -#: src/clients/inst_you.rb:80 +#. nothing to do +#: src/clients/inst_you.rb:80 msgid "Initializing ..." msgstr "초기화중..." -#. popup heading, with rich text widget and Yes/No buttons -#: src/clients/inst_you.rb:264 +#. popup heading, with rich text widget and Yes/No buttons +#: src/clients/inst_you.rb:264 msgid "Do you accept this license agreement?" msgstr "이 사용권 계약에 동의하시겠습니까?" -#. message popup -#: src/clients/inst_you.rb:298 +#. message popup +#: src/clients/inst_you.rb:298 msgid "" "Some application requiring restart has been updated. The system will\n" "reboot now then continue the installation.\n" @@ -33,88 +33,83 @@ "일부 응용 프로그램을 업데이트하려면 시스템을 재시작해야 합니다.\n" "시스템이 지금 재부팅된 다음 설치가 계속됩니다.\n" -#. command line help text -#: src/clients/online_update.rb:55 +#. command line help text +#: src/clients/online_update.rb:55 msgid "Online Update module" msgstr "온라인 업데이트 모듈" -#. command line help text for cd_update action -#: src/clients/online_update.rb:61 +#. command line help text for cd_update action +#: src/clients/online_update.rb:61 msgid "Start Patch CD Update" msgstr "패치 CD 업데이트 시작" -#. command line help text for simple_mode action -#: src/clients/online_update.rb:68 +#. command line help text for simple_mode action +#: src/clients/online_update.rb:68 msgid "Use simple package selector" msgstr "간단한 패키지 선택기 사용" -#. command line help text for cd_url option -#: src/clients/online_update.rb:77 +#. command line help text for cd_url option +#: src/clients/online_update.rb:77 msgid "URL for Patch CD (default value is '%1')" msgstr "패치 CD의 URL(기본값 '%1')" -#. command line help text for cd_directory option -#: src/clients/online_update.rb:85 +#. command line help text for cd_directory option +#: src/clients/online_update.rb:85 msgid "Directory for patch data on Patch CD (default value is '%1')" msgstr "패치 CD의 패치 데이터 디렉토리(기본값 '%1')" -#. help text for online-update initialization -#: src/clients/online_update.rb:130 -msgid "" -"<p>The system is initializing the installation and update repositories. " -"Software repositories can be altered in the <b>Installation Source</b> " -"module.</p>" -msgstr "" -"<p>시스템이 설치 및 업데이트 리포지토리를 초기화하는 중입니다. <b>설치 원본 모듈에서 소프트웨어 리포지토리를 바꿀 수 있습니다.</p>" +#. help text for online-update initialization +#: src/clients/online_update.rb:130 +msgid "<p>The system is initializing the installation and update repositories. Software repositories can be altered in the <b>Installation Source</b> module.</p>" +msgstr "<p>시스템이 설치 및 업데이트 리포지토리를 초기화하는 중입니다. <b>설치 원본</b> 모듈에서 소프트웨어 리포지토리를 바꿀 수 있습니다.</p>" -#. progress stage label -#: src/clients/online_update.rb:137 +#. progress stage label +#: src/clients/online_update.rb:137 msgid "Initialize the target system" msgstr "대상 시스템 초기화" -#. progress stage label -#: src/clients/online_update.rb:139 +#. progress stage label +#: src/clients/online_update.rb:139 msgid "Refresh software repositories" msgstr "업데이트 리포지토리 새로 고침" -#. progress stage label -#: src/clients/online_update.rb:141 +#. progress stage label +#: src/clients/online_update.rb:141 msgid "Check for available updates" msgstr "가능한 업데이트 확인" -#. progress step label -#: src/clients/online_update.rb:145 +#. progress step label +#: src/clients/online_update.rb:145 msgid "Initializing the target system..." msgstr "대상 시스템 초기화 중..." -#. progress step label -#: src/clients/online_update.rb:147 +#. progress step label +#: src/clients/online_update.rb:147 msgid "Refreshing software repositories..." msgstr "소프트웨어 리포지토리를 새로 고치는 중..." -#. progress step label -#: src/clients/online_update.rb:149 +#. progress step label +#: src/clients/online_update.rb:149 msgid "Checking for available updates..." msgstr "가능한 업데이트 확인 중..." -#. final progress step label -#: src/clients/online_update.rb:151 +#. final progress step label +#: src/clients/online_update.rb:151 msgid "Finished" msgstr "완료됨" -#. dialog caption -#: src/clients/online_update.rb:156 +#. dialog caption +#: src/clients/online_update.rb:156 msgid "Initializing CD Update" msgstr "CD 업데이트 초기화 중" -#. dialog caption -#: src/clients/online_update.rb:158 +#. dialog caption +#: src/clients/online_update.rb:158 msgid "Initializing Online Update" msgstr "온라인 업데이트 초기화 중" -#. yes/no question -#: src/clients/online_update.rb:209 +#. yes/no question +#: src/clients/online_update.rb:209 msgid "" "No update repository\n" "configured yet. Run configuration workflow now?" @@ -122,30 +117,30 @@ "업데이트 리포지토리가\n" "아직 구성되지 않았습니다. 지금 구성 워크플로를 실행하시겠습니까?" -#. error message -#: src/clients/online_update.rb:222 +#. error message +#: src/clients/online_update.rb:222 msgid "No update repository configured yet." msgstr "업데이트 리포지토리가 아직 구성되지 않았습니다." -#. progress window label -#: src/clients/online_update_install.rb:49 +#. progress window label +#: src/clients/online_update_install.rb:49 msgid "Progress Log" msgstr "진행 상태 기록" -#. progress bar label -#: src/clients/online_update_install.rb:54 +#. progress bar label +#: src/clients/online_update_install.rb:54 msgid "Package Progress" msgstr "패키지 진행" -#. progress bar label -#. progress bar label -#: src/clients/online_update_install.rb:60 -#: src/clients/online_update_install.rb:101 +#. progress bar label +#. progress bar label +#: src/clients/online_update_install.rb:60 +#: src/clients/online_update_install.rb:101 msgid "Total Progress" msgstr "모든 진행 상태" -#. help text for online update -#: src/clients/online_update_install.rb:66 +#. help text for online update +#: src/clients/online_update_install.rb:66 msgid "" "<p>After connecting to the update server,\n" "YaST will download all selected patches.\n" @@ -153,68 +148,63 @@ msgstr "" "<p>업데이트 서버에 연결한 후, YaST가\n" "선택한 모든 패치를 다운로드합니다.\n" -"여기에 약간의 시간이 소요될 수 있습니다. 다운로드 정보는 로그 창에 표시됩니" -"다.</p>" +"여기에 약간의 시간이 소요될 수 있습니다. 다운로드 정보는 로그 창에 표시됩니다.</p>" -#. help text for online update -#: src/clients/online_update_install.rb:73 -msgid "" -"<p>If special messages associated with patches are available, they will be " -"shown in an extra dialog when the patch is installed.</p>\n" -msgstr "" -"<p>패치에 관련된 특별한 메시지가 있는 경우 패치가 설치된 후에 추가 대화 상자" -"에 표시됩니다.</p>\n" +#. help text for online update +#: src/clients/online_update_install.rb:73 +msgid "<p>If special messages associated with patches are available, they will be shown in an extra dialog when the patch is installed.</p>\n" +msgstr "<p>패치에 관련된 특별한 메시지가 있는 경우 패치가 설치된 후에 추가 대화 상자에 표시됩니다.</p>\n" -#. using SetContents (define in online_update.ycp) -#: src/clients/online_update_install.rb:81 +#. using SetContents (define in online_update.ycp) +#: src/clients/online_update_install.rb:81 msgid "Patch Download and Installation" msgstr "패치 다운로드와 설치" -#. progress information -#: src/clients/online_update_install.rb:114 +#. progress information +#: src/clients/online_update_install.rb:114 msgid "Installation finished.\n" msgstr "설치 완료.\n" -#. label -#: src/clients/online_update_install.rb:121 +#. label +#: src/clients/online_update_install.rb:121 msgid "Patch installation finished." msgstr "패치 설치가 완료되었습니다." -#. error message -#: src/clients/online_update_install.rb:130 +#. error message +#: src/clients/online_update_install.rb:130 msgid "Patch processing failed." msgstr "패치 작업이 실패했습니다." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. Package: Online update -#. Summary: Selection dialog -#. Authors: Cornelius Schumacher -#. -#. Call the PackageSelector in YOU mode. -#: src/clients/online_update_select.rb:49 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. Package: Online update +#. Summary: Selection dialog +#. Authors: Cornelius Schumacher +#. +#. Call the PackageSelector in YOU mode. +#: src/clients/online_update_select.rb:49 msgid "Initializing for CD update..." msgstr "CD 업데이트 초기화 중..." -#. error popup: cancel/retry buttons follow -#: src/clients/online_update_select.rb:61 +#. error popup: cancel/retry buttons follow +#: src/clients/online_update_select.rb:61 msgid "" "Initialization failed. Check that\n" "you have inserted the correct CD.\n" @@ -222,9 +212,9 @@ "초기화하는데 실패하였습니다.\n" "올바른 CD가 삽입되어 있는지 확인하십시오.\n" -#. FATE#312509: Show if patch needs a reboot and offer -#. to delay the patch installation -#: src/clients/online_update_select.rb:189 +#. FATE#312509: Show if patch needs a reboot and offer +#. to delay the patch installation +#: src/clients/online_update_select.rb:189 msgid "" "Cannot configure online update repository \n" "without having package %1 installed" @@ -232,8 +222,8 @@ "%1 패키지가 설치되어 있지 않으면 온라인 업데이트 \n" "리포지토리를 구성할 수 없습니다." -#. popup message -#: src/modules/OnlineUpdate.rb:46 +#. popup message +#: src/modules/OnlineUpdate.rb:46 msgid "" "At least one of the updates installed requires restart of the session.\n" "Log out and in again as soon as possible.\n" @@ -241,8 +231,8 @@ "설치된 업데이트 중 세션을 다시 시작해야 하는 업데이트가 하나 이상 있습니다.\n" "가능한 한 빨리 로그아웃하고 다시 로그인하십시오.\n" -#. popup message -#: src/modules/OnlineUpdate.rb:51 +#. popup message +#: src/modules/OnlineUpdate.rb:51 msgid "" "Packages for package management were updated.\n" "Finishing and restarting YaST now." @@ -250,8 +240,8 @@ "패키지 관리를 위한 패키지가 업데이트되었습니다.\n" "지금 YaST를 마치고 재시작합니다." -#. popup message -#: src/modules/OnlineUpdate.rb:62 +#. popup message +#: src/modules/OnlineUpdate.rb:62 msgid "" "At least one of the updates installed requires a system reboot to function\n" "properly. Reboot the system as soon as possible." @@ -259,8 +249,8 @@ "설치된 업데이트 중 하나 이상이 올바로 작동하려면 시스템을 재부팅해야\n" "합니다. 시스템을 최대한 빨리 재부팅하십시오." -#. popup message -#: src/modules/OnlineUpdate.rb:67 +#. popup message +#: src/modules/OnlineUpdate.rb:67 msgid "" "These updates require a system reboot to function properly:\n" "\n" @@ -274,11 +264,10 @@ "\n" "시스템을 최대한 빨리 재부팅하십시오." -#. continue/cancel popup text -#: src/modules/OnlineUpdate.rb:76 +#. continue/cancel popup text +#: src/modules/OnlineUpdate.rb:76 msgid "" -"There are patches for package management available that require a restart of " -"YaST.\n" +"There are patches for package management available that require a restart of YaST.\n" "They should be installed first and all other patches after the restart.\n" "\n" "You selected some other patches to be installed now.\n" @@ -292,78 +281,78 @@ "\n" "설치를 계속하시겠습니까?" -#. progress log item (%1 is name of package) -#: src/modules/OnlineUpdateCallbacks.rb:111 +#. progress log item (%1 is name of package) +#: src/modules/OnlineUpdateCallbacks.rb:111 msgid "Retrieving %1..." msgstr "%1 검색 중..." -#. progress bar label -#: src/modules/OnlineUpdateCallbacks.rb:117 +#. progress bar label +#: src/modules/OnlineUpdateCallbacks.rb:117 msgid "Package Download Progress" msgstr "패키지 다운로드 진행" -#. progress log action (what is being done with the package) -#: src/modules/OnlineUpdateCallbacks.rb:146 +#. progress log action (what is being done with the package) +#: src/modules/OnlineUpdateCallbacks.rb:146 msgid "Removing" msgstr "제거 중" -#: src/modules/OnlineUpdateCallbacks.rb:146 +#: src/modules/OnlineUpdateCallbacks.rb:146 msgid "Installing" msgstr "설치 중" -#. progress bar label -#: src/modules/OnlineUpdateCallbacks.rb:161 +#. progress bar label +#: src/modules/OnlineUpdateCallbacks.rb:161 msgid "Package Installation Progress" msgstr "패키지 설치 진행" -#. progress log item (=previous action finished correctly) -#: src/modules/OnlineUpdateCallbacks.rb:174 +#. progress log item (=previous action finished correctly) +#: src/modules/OnlineUpdateCallbacks.rb:174 msgid "OK" msgstr "확인" -#. Progress log. Leave the space at the end, some other text may follow -#: src/modules/OnlineUpdateCallbacks.rb:230 +#. Progress log. Leave the space at the end, some other text may follow +#: src/modules/OnlineUpdateCallbacks.rb:230 msgid "Downloading delta RPM %1 " msgstr "델타 RPM %1 다운로드 중" -#. progress bar label -#: src/modules/OnlineUpdateCallbacks.rb:236 +#. progress bar label +#: src/modules/OnlineUpdateCallbacks.rb:236 msgid "Delta RPM Download Progress" msgstr "델타 RPM 다운로드 진행" -#. progress log item (previous action failed(%1 is reason) -#: src/modules/OnlineUpdateCallbacks.rb:262 +#. progress log item (previous action failed(%1 is reason) +#: src/modules/OnlineUpdateCallbacks.rb:262 msgid "Failed to download delta RPM: %1" msgstr "다음 델타 RPM을 다운로드하지 못했습니다. %1" -#. Progress log item (%1 is name of delta RPM). -#. Leave the space at the end, some other text may follow. -#: src/modules/OnlineUpdateCallbacks.rb:277 +#. Progress log item (%1 is name of delta RPM). +#. Leave the space at the end, some other text may follow. +#: src/modules/OnlineUpdateCallbacks.rb:277 msgid "Applying delta RPM: %1 " msgstr "다음 델타 RPM 적용: %1" -#. progress bar label -#: src/modules/OnlineUpdateCallbacks.rb:284 +#. progress bar label +#: src/modules/OnlineUpdateCallbacks.rb:284 msgid "Delta RPM Application Progress" msgstr "델타 RPM 응용 프로그램 진행" -#. progress log item (previous action failed(%1 is reason) -#: src/modules/OnlineUpdateCallbacks.rb:313 +#. progress log item (previous action failed(%1 is reason) +#: src/modules/OnlineUpdateCallbacks.rb:313 msgid "Failed to apply delta RPM: %1" msgstr "다음 델타 RPM을 적용하지 못했습니다. %1" -#. progress bar label -#: src/modules/OnlineUpdateCallbacks.rb:354 +#. progress bar label +#: src/modules/OnlineUpdateCallbacks.rb:354 msgid "Script Execution Progress" msgstr "스크립트 실행 진행" -#. log entry, %1 is name of the patch which contains the script -#: src/modules/OnlineUpdateCallbacks.rb:360 +#. log entry, %1 is name of the patch which contains the script +#: src/modules/OnlineUpdateCallbacks.rb:360 msgid "Starting script %1" msgstr "%1 스크립트 시작" -#. label, %1 is patch name with version and architecture -#: src/modules/OnlineUpdateCallbacks.rb:430 +#. label, %1 is patch name with version and architecture +#: src/modules/OnlineUpdateCallbacks.rb:430 msgid "" "Patch %1\n" "\n" @@ -371,73 +360,72 @@ "패치 %1\n" "\n" -#. error popoup (detailed info follows) -#: src/modules/OnlineUpdateCallbacks.rb:549 +#. error popoup (detailed info follows) +#: src/modules/OnlineUpdateCallbacks.rb:549 msgid "There was an error in the repository initialization." msgstr "리포지토리 초기화에 오류가 발생했습니다." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. Summary: YOU dialogs -#. Authors: Cornelius Schumacher -#: src/modules/OnlineUpdateDialogs.rb:43 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. Summary: YOU dialogs +#. Authors: Cornelius Schumacher +#: src/modules/OnlineUpdateDialogs.rb:43 msgid "No details available." msgstr "사용할 수 있는 세부사항 없음" -#: src/modules/OnlineUpdateDialogs.rb:45 +#: src/modules/OnlineUpdateDialogs.rb:45 msgid "&Details <<" msgstr "세부사항(&D) <<" -#: src/modules/OnlineUpdateDialogs.rb:46 +#: src/modules/OnlineUpdateDialogs.rb:46 msgid "&Details >>" msgstr "세부사항(&D) >>" -#: src/modules/OnlineUpdateDialogs.rb:50 +#: src/modules/OnlineUpdateDialogs.rb:50 msgid "Error" msgstr "에러" -#: src/modules/OnlineUpdateDialogs.rb:56 +#: src/modules/OnlineUpdateDialogs.rb:56 msgid "Try again" msgstr "재시도" #: src/modules/OnlineUpdateDialogs.rb:57 -#: src/modules/OnlineUpdateDialogs.rb:318 +#: src/modules/OnlineUpdateDialogs.rb:318 msgid "Skip Patch" msgstr "패치 생략" -#: src/modules/OnlineUpdateDialogs.rb:58 +#: src/modules/OnlineUpdateDialogs.rb:58 msgid "Skip All" msgstr "모두 생략" -#: src/modules/OnlineUpdateDialogs.rb:59 -#: src/modules/OnlineUpdateDialogs.rb:65 -#: src/modules/OnlineUpdateDialogs.rb:73 +#: src/modules/OnlineUpdateDialogs.rb:59 src/modules/OnlineUpdateDialogs.rb:65 +#: src/modules/OnlineUpdateDialogs.rb:73 msgid "Abort Update" msgstr "업데이트 중단" -#: src/modules/OnlineUpdateDialogs.rb:68 +#: src/modules/OnlineUpdateDialogs.rb:68 msgid "Warning" msgstr "경고" -#. Warning text for aborting the update before a patch is installed -#: src/modules/OnlineUpdateDialogs.rb:152 +#. Warning text for aborting the update before a patch is installed +#: src/modules/OnlineUpdateDialogs.rb:152 msgid "" "If you abort the installation now, no patch will be installed.\n" "Your installation will remain untouched.\n" @@ -445,8 +433,8 @@ "지금 설치를 중지하면, 패치는 설치되지 않습니다.\n" "시스템은 이전에 설치된 그대로 남아있게 됩니다.\n" -#. Warning text for aborting if some patches are installed, some not -#: src/modules/OnlineUpdateDialogs.rb:157 +#. Warning text for aborting if some patches are installed, some not +#: src/modules/OnlineUpdateDialogs.rb:157 msgid "" "Patch download and installation in progress.\n" "If you abort the installation now, the update is incomplete.\n" @@ -456,8 +444,8 @@ "지금 설치를 중단한다면, 업데이트는 불완전하게 종료됩니다.\n" "원하신다면, 다시 다운로드하고 업데이트를 시작하십시오.\n" -#. Warning text for aborting an installation during the install process -#: src/modules/OnlineUpdateDialogs.rb:164 +#. Warning text for aborting an installation during the install process +#: src/modules/OnlineUpdateDialogs.rb:164 msgid "" "If you abort the installation now,\n" "at least one patch is not installed correctly.\n" @@ -467,63 +455,62 @@ "패치는 단 하나도 올바르게 설치되지 않습니다.\n" "필요하다면 업데이트를 다시 해야하십시오." -#. Confirm user request to abort installation -#: src/modules/OnlineUpdateDialogs.rb:187 +#. Confirm user request to abort installation +#: src/modules/OnlineUpdateDialogs.rb:187 msgid "Really abort YaST Online Update?" msgstr "정말로 YaST 온라인 업데이트를 중단하시겠습니까?" -#. Button that will really abort the installation -#: src/modules/OnlineUpdateDialogs.rb:194 +#. Button that will really abort the installation +#: src/modules/OnlineUpdateDialogs.rb:194 msgid "&Abort Update" msgstr "업데이트 중단(&A)" -#. Button that will continue with the installation -#: src/modules/OnlineUpdateDialogs.rb:197 +#. Button that will continue with the installation +#: src/modules/OnlineUpdateDialogs.rb:197 msgid "&Continue Update" msgstr "업데이트 계속(&C)" -#: src/modules/OnlineUpdateDialogs.rb:274 +#: src/modules/OnlineUpdateDialogs.rb:274 msgid "<b>Patch:</b> %1<br>" msgstr "<b>패치:</b> %1<br>" -#: src/modules/OnlineUpdateDialogs.rb:277 +#: src/modules/OnlineUpdateDialogs.rb:277 msgid "<b>Summary:</b> %1<br>" msgstr "<b>요약:</b> %1<br>" -#: src/modules/OnlineUpdateDialogs.rb:288 +#: src/modules/OnlineUpdateDialogs.rb:288 msgid "<b>Packages:</b>" msgstr "패키지:" -#: src/modules/OnlineUpdateDialogs.rb:302 +#: src/modules/OnlineUpdateDialogs.rb:302 msgid "Patch &Details <<" msgstr "패치 세부사항 <<(&D)" -#: src/modules/OnlineUpdateDialogs.rb:303 +#: src/modules/OnlineUpdateDialogs.rb:303 msgid "Patch &Details >>" msgstr "패치 세부사항 >>(&D)" -#: src/modules/OnlineUpdateDialogs.rb:317 +#: src/modules/OnlineUpdateDialogs.rb:317 msgid "Install Patch" msgstr "패치 설치" -#. Dialog label above a list of patches -#: src/modules/OnlineUpdateDialogs.rb:424 +#. Dialog label above a list of patches +#: src/modules/OnlineUpdateDialogs.rb:424 msgid "These patches will need rebooting after installation" msgstr "이러한 패치는 설치 후에 재부팅해야 합니다." -#. Push button for Skipping all patches that require rebooting -#: src/modules/OnlineUpdateDialogs.rb:433 +#. Push button for Skipping all patches that require rebooting +#: src/modules/OnlineUpdateDialogs.rb:433 msgid "&Skip All" msgstr "모두 건너뛰기(&S)" -#. Solver can't solve it automatically -#: src/modules/OnlineUpdateDialogs.rb:457 +#. Solver can't solve it automatically +#: src/modules/OnlineUpdateDialogs.rb:457 msgid "Online update was unable to unselect some patches that need rebooting." -msgstr "" -"온라인 업데이트에서 재부팅해야 하는 일부 패치를 선택 취소할 수 없습니다." +msgstr "온라인 업데이트에서 재부팅해야 하는 일부 패치를 선택 취소할 수 없습니다." -#. Dialog label above a list of products (out of support) -#: src/modules/OnlineUpdateDialogs.rb:539 +#. Dialog label above a list of products (out of support) +#: src/modules/OnlineUpdateDialogs.rb:539 msgid "" "These products have reached their end of general support\n" "and thus do not provide new updates anymore.\n" Modified: branches/SLE12-SP3/yast/ko/po/packager.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/packager.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/packager.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,18 +14,18 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. module description -#: src/clients/checkmedia.rb:37 +#. module description +#: src/clients/checkmedia.rb:37 msgid "Check CD or DVD media integrity" msgstr "CD 또는 DVD 미디어 무결성 확인" -#. dialog caption -#: src/clients/do_not_show_again_editor.rb:67 +#. dialog caption +#: src/clients/do_not_show_again_editor.rb:67 msgid "Editor for 'Do Not Show Again'" msgstr "'다시 표시 안 함'에 대한 편집기" -#. help text -#: src/clients/do_not_show_again_editor.rb:70 +#. help text +#: src/clients/do_not_show_again_editor.rb:70 msgid "" "<p>Remove entries by selecting them in the table and clicking the \n" "<b>Delete</b> button. The entries will be removed immediately from \n" @@ -35,46 +35,46 @@ "제거하십시오. 항목이 현재 구성에서 즉시 \n" "제거됩니다.</p>\n" -#: src/clients/do_not_show_again_editor.rb:79 +#: src/clients/do_not_show_again_editor.rb:79 msgid "Type" msgstr "타입" -#: src/clients/do_not_show_again_editor.rb:79 +#: src/clients/do_not_show_again_editor.rb:79 msgid "Popup Ident." msgstr "팝업 식별자" -#: src/clients/do_not_show_again_editor.rb:79 +#: src/clients/do_not_show_again_editor.rb:79 msgid "Additional Info" msgstr "추가 정보" -#. FIXME: Add filter -#. `PushButton(`id(`filter), _("&Filter...")), -#. `HSpacing(2), -#: src/clients/do_not_show_again_editor.rb:86 +#. FIXME: Add filter +#. `PushButton(`id(`filter), _("&Filter...")), +#. `HSpacing(2), +#: src/clients/do_not_show_again_editor.rb:86 msgid "&Delete" msgstr "삭제(&D)" -#. error popup -#: src/clients/inst_custom_packages.rb:36 +#. error popup +#: src/clients/inst_custom_packages.rb:36 msgid "Could not read package information." msgstr "패키지 정보를 읽을 수 없습니다." -#. an error popup -#. an error popup -#. an error popup -#. an error popup -#: src/clients/inst_kickoff.rb:377 src/clients/inst_kickoff.rb:460 -#: src/clients/inst_kickoff.rb:536 src/clients/inst_kickoff.rb:593 +#. an error popup +#. an error popup +#. an error popup +#. an error popup +#: src/clients/inst_kickoff.rb:377 src/clients/inst_kickoff.rb:460 +#: src/clients/inst_kickoff.rb:536 src/clients/inst_kickoff.rb:593 msgid "Backup of %1 failed. See %2 for details." msgstr "%1의 백업이 실패했습니다. 자세한 내용은 %2을(를) 참조하십시오." -#. dialog heading -#: src/clients/inst_mediacopy.rb:49 +#. dialog heading +#: src/clients/inst_mediacopy.rb:49 msgid "Copy Installation Media" msgstr "설치 미디어 복사" -#. help text -#: src/clients/inst_mediacopy.rb:51 +#. help text +#: src/clients/inst_mediacopy.rb:51 msgid "" "<p>The installation CDs will be copied into the system\n" "to create a repository that can be used to install\n" @@ -84,56 +84,56 @@ "만들기 위해 설치 CD가 시스템에\n" "복사됩니다.</p>\n" -#. label for showing repositories -#: src/clients/inst_mediacopy.rb:57 +#. label for showing repositories +#: src/clients/inst_mediacopy.rb:57 msgid "Registered Repositories" msgstr "등록된 리포지토리" -#. force minimum width -#. table header - name of the repo -#. table header - name of the repo -#: src/clients/inst_mediacopy.rb:65 -#: src/include/packager/key_manager_dialogs.rb:306 -#: src/lib/packager/clients/repositories.rb:719 -#: src/lib/packager/clients/repositories.rb:732 +#. force minimum width +#. table header - name of the repo +#. table header - name of the repo +#: src/clients/inst_mediacopy.rb:65 +#: src/include/packager/key_manager_dialogs.rb:306 +#: src/lib/packager/clients/repositories.rb:719 +#: src/lib/packager/clients/repositories.rb:732 msgid "Name" msgstr "이름" -#: src/clients/inst_mediacopy.rb:65 +#: src/clients/inst_mediacopy.rb:65 msgid "Version" msgstr "버전" -#. feedback popup 1/2 -#: src/clients/inst_mediacopy.rb:118 +#. feedback popup 1/2 +#: src/clients/inst_mediacopy.rb:118 msgid "Copying CD contents to a local directory..." msgstr "CD 내용을 로컬 디렉토리로 복사 중..." -#. feedback popup 2/2 -#: src/clients/inst_mediacopy.rb:120 +#. feedback popup 2/2 +#: src/clients/inst_mediacopy.rb:120 msgid "Please wait..." msgstr "잠시 기다리십시오..." -#. TRANSLATORS: popup header -#. TRANSLATORS: popup header -#: src/clients/inst_productsources.rb:273 -#: src/clients/inst_productsources.rb:1351 +#. TRANSLATORS: popup header +#. TRANSLATORS: popup header +#: src/clients/inst_productsources.rb:273 +#: src/clients/inst_productsources.rb:1351 msgid "Aborting Configuration of Online Repository" msgstr "온라인 리포지토리 구성 중단 중" -#. TRANSLATORS: popup question -#. TRANSLATORS: popup question -#: src/clients/inst_productsources.rb:275 -#: src/clients/inst_productsources.rb:1353 +#. TRANSLATORS: popup question +#. TRANSLATORS: popup question +#: src/clients/inst_productsources.rb:275 +#: src/clients/inst_productsources.rb:1353 msgid "Are you sure you want to abort the configuration?" msgstr "구성을 중단하시겠습니까?" -#. TRANSLATORS: popup header -#: src/clients/inst_productsources.rb:307 +#. TRANSLATORS: popup header +#: src/clients/inst_productsources.rb:307 msgid "Network is not configured." msgstr "네트워크가 구성되어 있지 않습니다." -#. TRANSLATORS: popup question -#: src/clients/inst_productsources.rb:309 +#. TRANSLATORS: popup question +#: src/clients/inst_productsources.rb:309 msgid "" "Online sources defined by product require an Internet connection.\n" "\n" @@ -143,43 +143,43 @@ "\n" "인터넷 연결을 구성하시겠습니까?" -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:651 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:651 msgid "Check network configuration" msgstr "네트워크 구성 확인" -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:653 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:653 msgid "Download list of online repositories" msgstr "온라인 리포지토리 목록 다운로드" -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:658 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:658 msgid "Checking network configuration..." msgstr "네트워크 구성 확인 중..." -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:660 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:660 msgid "Downloading list of online repositories..." msgstr "온라인 리포지토리 목록 다운로드 중..." -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:669 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:669 msgid "Initialize the repository manager" msgstr "리포지토리 관리자 초기화" -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:674 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:674 msgid "Initializing the repository manager..." msgstr "리포지토리 관리자 초기화 중..." -#. TRANSLATORS: dialog caption -#: src/clients/inst_productsources.rb:684 +#. TRANSLATORS: dialog caption +#: src/clients/inst_productsources.rb:684 msgid "Reading List of Online Repositories" msgstr "온라인 리포지토리 목록을 읽는 중" -#. TRANSLATORS: dialog help -#: src/clients/inst_productsources.rb:690 +#. TRANSLATORS: dialog help +#: src/clients/inst_productsources.rb:690 msgid "" "<p>The packager is being initialized and \n" "the list of servers downloaded from the Web.</p>\n" @@ -187,8 +187,8 @@ "<p>패키지를 초기화하고 \n" "웹에서 서버 목록을 다운로드 중입니다.</p>\n" -#. TRANSLATORS: error report -#: src/clients/inst_productsources.rb:722 +#. TRANSLATORS: error report +#: src/clients/inst_productsources.rb:722 msgid "" "Cannot download list of repositories,\n" "no network configured." @@ -196,8 +196,8 @@ "리포지토리 목록을 다운로드할 수 없습니다.\n" "네트워크가 구성되지 않았습니다." -#. TRANSLATORS: light-warning message -#: src/clients/inst_productsources.rb:800 +#. TRANSLATORS: light-warning message +#: src/clients/inst_productsources.rb:800 msgid "" "No product URL defined from which to download\n" "list of repositories.\n" @@ -205,8 +205,8 @@ "리포지토리 목록을 다운로드할 제품 URL이\n" "정의되어 있지 않습니다.\n" -#. TRANSLATORS: warning message -#: src/clients/inst_productsources.rb:814 +#. TRANSLATORS: warning message +#: src/clients/inst_productsources.rb:814 msgid "" "Unable to download list of repositories\n" "or no repositories defined." @@ -214,26 +214,26 @@ "리포지토리 목록을 다운로드할 수 없거나\n" "정의된 리포지토리가 없습니다." -#. TRANSLATORS: HTML-formatted summary text -#. %1 is replaced with "Yes" (currently only "Yes") -#. see *4 -#: src/clients/inst_productsources.rb:920 +#. TRANSLATORS: HTML-formatted summary text +#. %1 is replaced with "Yes" (currently only "Yes") +#. see *4 +#: src/clients/inst_productsources.rb:920 msgid "<b>Recommended:</b> %1<br>" msgstr "<b>권장사항:</b> %1<br>" -#. TRANSLATORS: used for "Recommended: Yes" (see *4) -#: src/clients/inst_productsources.rb:922 +#. TRANSLATORS: used for "Recommended: Yes" (see *4) +#: src/clients/inst_productsources.rb:922 msgid "Yes" msgstr "예" -#. TRANSLATORS: This is a complex HTML-formatted information about selecetd external repository -#. It contains "key: value" pair, one per line, separated by <br> tags -#. %1 is replaced with an URL of the selected repository -#. %2 is replaced with an URL from which we've got this repository information -#. %3 is replaced with a summary text for the selected repository -#. %4 is replaced with a description text for the selected repository -#. %5 is replaced with an emty string or "Recommended: Yes" (*4) -#: src/clients/inst_productsources.rb:934 +#. TRANSLATORS: This is a complex HTML-formatted information about selecetd external repository +#. It contains "key: value" pair, one per line, separated by <br> tags +#. %1 is replaced with an URL of the selected repository +#. %2 is replaced with an URL from which we've got this repository information +#. %3 is replaced with a summary text for the selected repository +#. %4 is replaced with a description text for the selected repository +#. %5 is replaced with an emty string or "Recommended: Yes" (*4) +#: src/clients/inst_productsources.rb:934 msgid "" "<p>\n" "<b>URL:</b> %1<br>\n" @@ -251,30 +251,29 @@ "%5\n" "</p>" -#. TRANSLATORS: dialog caption -#: src/clients/inst_productsources.rb:1242 +#. TRANSLATORS: dialog caption +#: src/clients/inst_productsources.rb:1242 msgid "List of Online Repositories" msgstr "온라인 리포지토리 목록" -#. TRANSLATORS: push button -#. push button -#: src/clients/inst_productsources.rb:1249 -#: src/modules/SourceManagerSLP.rb:111 +#. TRANSLATORS: push button +#. push button +#: src/clients/inst_productsources.rb:1249 src/modules/SourceManagerSLP.rb:111 msgid "&Filter" msgstr "필터(&F)" -#. TRANSLATORS: multi-selection box -#: src/clients/inst_productsources.rb:1259 +#. TRANSLATORS: multi-selection box +#: src/clients/inst_productsources.rb:1259 msgid "&List of Repositories" msgstr "리포지토리 목록(&L)" -#. TRANSLATORS: Rich-text widget (HTML) -#: src/clients/inst_productsources.rb:1265 +#. TRANSLATORS: Rich-text widget (HTML) +#: src/clients/inst_productsources.rb:1265 msgid "Repository Description" msgstr "리포지토리 설명" -#. TRANSLATORS: dialog help 1/3 -#: src/clients/inst_productsources.rb:1269 +#. TRANSLATORS: dialog help 1/3 +#: src/clients/inst_productsources.rb:1269 msgid "" "<p>List of default online repositories.\n" "Click on a repository for details.</p>\n" @@ -282,85 +281,79 @@ "<p>기본 온라인 리포지토리 목록입니다.\n" "자세한 내용을 보려면 리포지토리를 클릭하십시오.</p>\n" -#. TRANSLATORS: dialog help 2/3 (version for installation) -#: src/clients/inst_productsources.rb:1274 -msgid "" -"<p>Select the online repositories you want to use then click <b>Next</b>.\n" -msgstr "" -"<p>사용할 온라인 리포지토리를 선택하고 <b>다음</b>을 클릭하십시오.</p>\n" +#. TRANSLATORS: dialog help 2/3 (version for installation) +#: src/clients/inst_productsources.rb:1274 +msgid "<p>Select the online repositories you want to use then click <b>Next</b>.</p>\n" +msgstr "<p>사용할 온라인 리포지토리를 선택하고 <b>다음</b>을 클릭하십시오.</p>\n" -#. TRANSLATORS: dialog help 2/3 (version for running system) -#: src/clients/inst_productsources.rb:1278 -msgid "" -"<p>Select the online repositories you want to use then click <b>Finish</b>.\n" -msgstr "" -"<p>사용할 온라인 리포지토리를 선택하고 <b>완료</b>를 클릭하십시오.</p>\n" +#. TRANSLATORS: dialog help 2/3 (version for running system) +#: src/clients/inst_productsources.rb:1278 +msgid "<p>Select the online repositories you want to use then click <b>Finish</b>.</p>\n" +msgstr "<p>사용할 온라인 리포지토리를 선택하고 <b>완료</b>를 클릭하십시오.</p>\n" -#. TRANSLATORS: dialog help 3/3 -#: src/clients/inst_productsources.rb:1283 +#. TRANSLATORS: dialog help 3/3 +#: src/clients/inst_productsources.rb:1283 msgid "<p>To remove a used repository, simply deselect it.</p>" msgstr "<p>사용된 리포지토리를 제거하려면 선택 취소하십시오.</p>" -#. TRANSLATORS: dialog caption -#: src/clients/inst_productsources.rb:1379 +#. TRANSLATORS: dialog caption +#: src/clients/inst_productsources.rb:1379 msgid "Writing List of Online Repositories" msgstr "온라인 리포지토리 목록 작성 중" -#. TRANSLATORS: dialog help -#. TRANSLATORS: dialog help -#: src/clients/inst_productsources.rb:1385 -#: src/include/packager/repositories_include.rb:93 +#. TRANSLATORS: dialog help +#. TRANSLATORS: dialog help +#: src/clients/inst_productsources.rb:1385 +#: src/include/packager/repositories_include.rb:93 msgid "<p>The repository manager is downloading repository details...</p>" msgstr "<p>리포지토리 관리자가 리포지토리 세부 사항을 다운로드 중입니다.</p>" -#. TRANSLATORS: pop-up error message -#. %1 is replaced with a repository name or URL -#. TRANSLATORS: pop-up error message -#. %1 is replaced with a repository name or URL -#. TRANSLATORS: pop-up error message -#. %1 is replaced with a repository name or URL -#: src/clients/inst_productsources.rb:1477 -#: src/clients/inst_productsources.rb:1501 -#: src/clients/inst_productsources.rb:1519 +#. TRANSLATORS: pop-up error message +#. %1 is replaced with a repository name or URL +#. TRANSLATORS: pop-up error message +#. %1 is replaced with a repository name or URL +#. TRANSLATORS: pop-up error message +#. %1 is replaced with a repository name or URL +#: src/clients/inst_productsources.rb:1477 +#: src/clients/inst_productsources.rb:1501 +#: src/clients/inst_productsources.rb:1519 msgid "Adding repository %1 failed." msgstr "%1 리포지토리 추가에 실패했습니다." -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:1596 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:1596 msgid "Delete deselected online repositories" msgstr "선택 취소한 온라인 리포지토리 삭제" -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:1598 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:1598 msgid "Deleting deselected online repositories..." msgstr "선택 취소한 온라인 리포지토리 삭제 중..." -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:1606 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:1606 msgid "Add all selected online repositories" msgstr "선택한 모든 온라인 리포지토리 추가" -#. TRANSLATORS: progress step -#: src/clients/inst_productsources.rb:1611 +#. TRANSLATORS: progress step +#: src/clients/inst_productsources.rb:1611 msgid "Adding all selected online repositories..." msgstr "선택한 모든 온라인 리포지토리 추가 중..." -#. TRANSLATORS: progress step -#. %1 is replaced with repository name or URL -#: src/clients/inst_productsources.rb:1620 +#. TRANSLATORS: progress step +#. %1 is replaced with repository name or URL +#: src/clients/inst_productsources.rb:1620 msgid "Add repository: %1" msgstr "리포지토리 추가: %1" -#. TRANSLATORS: progress step, -#. %1 is replaced with repository name or URL -#: src/clients/inst_productsources.rb:1629 +#. TRANSLATORS: progress step, +#. %1 is replaced with repository name or URL +#: src/clients/inst_productsources.rb:1629 msgid "Adding repository: %1 ..." msgstr "리포지토리 추가 중: %1 ..." -#. less than LOW_MEMORY_MIB RAM -#: src/clients/inst_productsources.rb:1741 +#. less than LOW_MEMORY_MIB RAM +#: src/clients/inst_productsources.rb:1741 msgid "" "Low memory detected.\n" "\n" @@ -384,39 +377,35 @@ "이 경우 나중에 설치된 시스템에서 온라인 리포지토리를\n" "사용하는 것이 좋습니다." -#. continue-cancel popup -#: src/clients/inst_rpmcopy.rb:81 +#. continue-cancel popup +#: src/clients/inst_rpmcopy.rb:81 msgid "Initializing the target directory failed." msgstr "대상 디렉토리 초기화에 실패했습니다." -#. re-initialize package information -#. force reinitialization -#: src/clients/inst_rpmcopy.rb:129 src/clients/sw_single.rb:739 +#. re-initialize package information +#. force reinitialization +#: src/clients/inst_rpmcopy.rb:129 src/clients/sw_single.rb:739 msgid "Installing Packages..." msgstr "패키지 설치 중..." -#. error report, %1 is number -#: src/clients/inst_rpmcopy.rb:322 +#. error report, %1 is number +#: src/clients/inst_rpmcopy.rb:322 msgid "Failed to select %1 packages for installation." msgstr "설치할 패키지 %1개를 선택하지 못했습니다." -#. set SoftLock to avoid the installation of recommended patterns (#159466) -#: src/clients/inst_rpmcopy.rb:358 +#. set SoftLock to avoid the installation of recommended patterns (#159466) +#: src/clients/inst_rpmcopy.rb:358 msgid "Could not set patterns: %1." msgstr "패턴을 설정할 수 없음: %1." -#. Solve dependencies -#: src/clients/inst_rpmcopy.rb:368 -msgid "" -"The package resolver run failed. Check your software section in the AutoYaST " -"profile." -msgstr "" -"패키지 해결 프로그램 실행에 실패했습니다. AutoYaST 프로파일의 소프트웨어 섹션" -"을 확인하십시오." +#. Solve dependencies +#: src/clients/inst_rpmcopy.rb:368 +msgid "The package resolver run failed. Check your software section in the AutoYaST profile." +msgstr "패키지 해결 프로그램 실행에 실패했습니다. AutoYaST 프로파일의 소프트웨어 섹션을 확인하십시오." -#. error message - displayed in a scrollable text area -#. %1 - an error message (details) -#: src/clients/inst_rpmcopy.rb:416 +#. error message - displayed in a scrollable text area +#. %1 - an error message (details) +#: src/clients/inst_rpmcopy.rb:416 msgid "" "Installation failed.\n" "\n" @@ -432,80 +421,73 @@ "\n" "패키지 설치가 중단됩니다.\n" -#. dialog caption -#. dialog caption -#. dialog caption -#: src/clients/key_manager.rb:70 -#: src/lib/packager/clients/repositories.rb:1505 -#: src/modules/AddOnProduct.rb:699 +#. dialog caption +#. dialog caption +#. dialog caption +#: src/clients/key_manager.rb:70 src/lib/packager/clients/repositories.rb:1505 +#: src/modules/AddOnProduct.rb:699 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. intermediate popup while initializing internal packagemanagement -#: src/clients/media_proposal.rb:39 +#. intermediate popup while initializing internal packagemanagement +#: src/clients/media_proposal.rb:39 msgid "Reading package information..." msgstr "패키지 정보 읽는 중..." -#. Proposal for system to update, part of the richtext -#: src/clients/media_proposal.rb:52 +#. Proposal for system to update, part of the richtext +#: src/clients/media_proposal.rb:52 msgid "No Valid Installation Media" msgstr "유효한 설치 미디어가 없습니다." -#. this is a heading -#: src/clients/media_proposal.rb:87 +#. this is a heading +#: src/clients/media_proposal.rb:87 msgid "Installation Media" msgstr "설치 미디어" -#. this is a menu entry -#: src/clients/media_proposal.rb:89 +#. this is a menu entry +#: src/clients/media_proposal.rb:89 msgid "&Media" msgstr "미디어(&M)" -#. the language_changed flag has NOT been set by the NLD frame -#. the language_changed flag has NOT been set by the NLD frame -#: src/clients/software_simple_proposal.rb:48 -#: src/lib/packager/clients/software_proposal.rb:67 +#. the language_changed flag has NOT been set by the NLD frame +#. the language_changed flag has NOT been set by the NLD frame +#: src/clients/software_simple_proposal.rb:48 +#: src/lib/packager/clients/software_proposal.rb:67 msgid "The software proposal is reset to the default values." msgstr "소프트웨어 제안을 기본 값으로 재설정합니다." -#. warning text -#. warning text -#: src/clients/software_simple_proposal.rb:58 -#: src/lib/packager/clients/software_proposal.rb:77 -msgid "" -"Cannot solve dependencies automatically. Manual intervention is required." +#. warning text +#. warning text +#: src/clients/software_simple_proposal.rb:58 +#: src/lib/packager/clients/software_proposal.rb:77 +msgid "Cannot solve dependencies automatically. Manual intervention is required." msgstr "의존성 문제를 자동으로 해결할 수 없습니다. 수동으로 해결해야 합니다." -#. Command line help text for the software management module, %1 is "zypper" -#: src/clients/sw_single.rb:64 -msgid "" -"Software Installation - This module does not support the command line " -"interface, use '%1' instead." -msgstr "" -"소프트웨어 설치 - 이 모듈은 명령줄 인터페이스를 지원하지 않습니다. 대신 " -"'%1'을(를) 사용하십시오." +#. Command line help text for the software management module, %1 is "zypper" +#: src/clients/sw_single.rb:64 +msgid "Software Installation - This module does not support the command line interface, use '%1' instead." +msgstr "소프트웨어 설치 - 이 모듈은 명령줄 인터페이스를 지원하지 않습니다. 대신 '%1'을(를) 사용하십시오." -#. error message (%1 is a package file name) -#: src/clients/sw_single.rb:194 +#. error message (%1 is a package file name) +#: src/clients/sw_single.rb:194 msgid "Error: Cannot copy package %1 to temporary repository." msgstr "오류: 임시 리포지토리에 패키지 %1을(를) 복사할 수 없습니다." -#. error message -#: src/clients/sw_single.rb:216 +#. error message +#: src/clients/sw_single.rb:216 msgid "Error: Cannot add a temporary directory, packages cannot be installed." -msgstr "" -"오류: 임시 디렉토리를 추가 할 수 없습니다. 패키지를 설치할 수 없습니다." +msgstr "오류: 임시 디렉토리를 추가 할 수 없습니다. 패키지를 설치할 수 없습니다." -#. error message -#. error message -#: src/clients/sw_single.rb:243 src/clients/sw_single.rb:266 +#. error message +#. error message +#: src/clients/sw_single.rb:243 src/clients/sw_single.rb:266 msgid "Error: Cannot query package file %1." msgstr "오류: 패키지 파일 %1을(를) 쿼리할 수 없습니다." -#. Error message: -#. %1 = package name (may include complete RPM file name) -#. %2 = error message -#: src/clients/sw_single.rb:299 +#. Error message: +#. %1 = package name (may include complete RPM file name) +#. %2 = error message +#: src/clients/sw_single.rb:299 msgid "" "Package %1 could not be installed.\n" "\n" @@ -517,17 +499,17 @@ "자세히:\n" "%2\n" -#. error popup, %1 is the name of the .rpm package -#: src/clients/sw_single.rb:313 +#. error popup, %1 is the name of the .rpm package +#: src/clients/sw_single.rb:313 msgid "Package %1 was not found on the medium." msgstr "패키지 %1 를 해당 매체에서 찾을 수 없습니다." -#. start package manager -#: src/clients/sw_single.rb:362 +#. start package manager +#: src/clients/sw_single.rb:362 msgid "An error occurred during repository initialization." msgstr "리포지토리 초기화 중 오류가 발생했습니다." -#: src/clients/sw_single.rb:369 +#: src/clients/sw_single.rb:369 msgid "" "No repository is defined.\n" "Only installed packages are displayed." @@ -535,27 +517,27 @@ "정의된 리포지토리가 없습니다.\n" "설치된 패키지만 표시됩니다." -#. a stage in the progress dialog -#: src/clients/sw_single.rb:501 +#. a stage in the progress dialog +#: src/clients/sw_single.rb:501 msgid "Initialize the Target System" msgstr "대상 시스템 초기화" -#: src/clients/sw_single.rb:502 +#: src/clients/sw_single.rb:502 msgid "Load the Configured Repositories" msgstr "구성된 리포지토리 로드" -#. %1 is path to the target system (e.g. /tmp/dirinstall -#: src/clients/sw_single.rb:510 +#. %1 is path to the target system (e.g. /tmp/dirinstall +#: src/clients/sw_single.rb:510 msgid "Reset the target system to %1" msgstr "대상 시스템을 %1(으)로 재설정" -#. a stage in the progress dialog -#: src/clients/sw_single.rb:516 +#. a stage in the progress dialog +#: src/clients/sw_single.rb:516 msgid "Starting the Software Manager" msgstr "소프트웨어 관리자 시작 중" -#. reset summary -#: src/clients/sw_single.rb:580 +#. reset summary +#: src/clients/sw_single.rb:580 msgid "" "During the last package installation\n" "several packages failed to install.\n" @@ -565,8 +547,8 @@ "여러 패키지를 설치하지 못했습니다.\n" "지금 설치하시겠습니까?\n" -#. start the repository manager -#: src/clients/sw_single.rb:614 +#. start the repository manager +#: src/clients/sw_single.rb:614 msgid "" "Cannot configure online update repository \n" "without having package %1 installed" @@ -574,7 +556,7 @@ "%1 패키지가 설치되어 있지 않으면 온라인 업데이트 \n" "리포지토리를 구성할 수 없습니다." -#: src/clients/sw_single.rb:640 +#: src/clients/sw_single.rb:640 msgid "" "Cannot search packages in online repositories\n" "without having package %1 installed" @@ -582,8 +564,8 @@ "%1 패키지 설치 없이 온라인 저장소에\n" "있는 패키지를 검색할 수 없습니다." -#. error report, %1 is a list of packages -#: src/clients/sw_single.rb:668 +#. error report, %1 is a list of packages +#: src/clients/sw_single.rb:668 msgid "" "The following packages have not been found on the medium:\n" "%1\n" @@ -591,105 +573,97 @@ "미디어에서 다음 패키지를 찾을 수 없습니다.\n" "%1\n" -#. rich text message, %1 = CD identification -#: src/include/checkmedia/ui.rb:94 +#. rich text message, %1 = CD identification +#: src/include/checkmedia/ui.rb:94 msgid "<BIG><B>%1</B></BIG>" msgstr "<BIG><B>%1</B></BIG>" -#. rich text message, %1 medium number, e.g. CD1,CD2... -#: src/include/checkmedia/ui.rb:99 +#. rich text message, %1 medium number, e.g. CD1,CD2... +#: src/include/checkmedia/ui.rb:99 msgid "<UL><LI>Medium: %1</LI></UL>" msgstr "<UL><LI>미디어: %1</LI></UL>" -#. rich text message, %1 = size of the medium -#: src/include/checkmedia/ui.rb:103 +#. rich text message, %1 = size of the medium +#: src/include/checkmedia/ui.rb:103 msgid "<UL><LI>Size: %1</LI></UL>" msgstr "<UL><LI>크기: %1</LI></UL>" -#. rich text message, %1 = result of the check -#. the check has been canceled -#: src/include/checkmedia/ui.rb:107 src/include/checkmedia/ui.rb:529 +#. rich text message, %1 = result of the check +#. the check has been canceled +#: src/include/checkmedia/ui.rb:107 src/include/checkmedia/ui.rb:529 msgid "<UL><LI>Result: %1</LI></UL>" msgstr "<UL><LI>결과: %1</LI></UL>" -#. rich text - error message -#: src/include/checkmedia/ui.rb:112 +#. rich text - error message +#: src/include/checkmedia/ui.rb:112 msgid "The drive does not contain a medium or the ISO file system is broken." msgstr "드라이브에 미디어가 없거나 ISO 파일 시스템이 손상되었습니다." -#. result of the check - success -#: src/include/checkmedia/ui.rb:122 +#. result of the check - success +#: src/include/checkmedia/ui.rb:122 msgid "<B>OK</B> -- The medium has been successfully verified." msgstr "<B>정상</B> -- 매체가 성공적으로 확인되었습니다." -#. wrong MD5 -#: src/include/checkmedia/ui.rb:126 -msgid "" -"<B>Error</B> -- MD5 sum does not match<BR>This medium should not be used." -msgstr "" -"<B>오류</B> -- MD5 sum이 일치하지 않습니다.<BR>해당 매체를 사용하지 마십시오." +#. wrong MD5 +#: src/include/checkmedia/ui.rb:126 +msgid "<B>Error</B> -- MD5 sum does not match<BR>This medium should not be used." +msgstr "<B>오류</B> -- MD5 sum이 일치하지 않습니다.<BR>해당 매체를 사용하지 마십시오." -#. the correct MD5 is unknown -#: src/include/checkmedia/ui.rb:131 +#. the correct MD5 is unknown +#: src/include/checkmedia/ui.rb:131 msgid "<B>Unknown</B> -- The correct MD5 sum of the medium is unknown." msgstr "<B>알 수없음</B> -- 미디어의 올바른 MD5 합계를 알 수 없습니다." -#. warning popup - the CD/DVD drive doesn't contain the first medium (CD1/DVD1) -#: src/include/checkmedia/ui.rb:251 +#. warning popup - the CD/DVD drive doesn't contain the first medium (CD1/DVD1) +#: src/include/checkmedia/ui.rb:251 msgid "Insert the first installation medium." msgstr "첫 번째 설치 미디어를 삽입하십시오." -#. dialog header -#: src/include/checkmedia/ui.rb:299 +#. dialog header +#: src/include/checkmedia/ui.rb:299 msgid "Media Check" msgstr "미디어 확인" -#. help text - media check (header) 1/8 -#: src/include/checkmedia/ui.rb:302 +#. help text - media check (header) 1/8 +#: src/include/checkmedia/ui.rb:302 msgid "<P><B>Media Check</B></P>" msgstr "<P><B>미디어 확인</B></P>" -#. help text - media check 2/8 -#: src/include/checkmedia/ui.rb:304 +#. help text - media check 2/8 +#: src/include/checkmedia/ui.rb:304 msgid "" "<P>When you have a problem with\n" -"the installation and you are using a CD or DVD installation medium, you " -"should check\n" +"the installation and you are using a CD or DVD installation medium, you should check\n" "whether the medium is broken.</P>\n" msgstr "" "<P>CD 또는 DVD 설치 매체를 사용하여\n" "설치하는 동안 문제가 발생하면 해당 매체가 손상되었는지 여부를\n" "확인해야 합니다.</P>\n" -#. help text - media check 3/8 -#: src/include/checkmedia/ui.rb:310 +#. help text - media check 3/8 +#: src/include/checkmedia/ui.rb:310 msgid "" -"<P>Select a drive, insert a medium into the drive and press <B>Start Check\n" +"<P>Select a drive, insert a medium into the drive and press <B>Start Check</B>\n" "or use <B>Check ISO File</B> and select an ISO file.\n" "The check can take several minutes depending on speed of the\n" "drive and size of the medium. The check verifies the MD5 checksum.</P> " msgstr "" -"<P>드라이브를 선택하고, 드라이브에 매체를 삽입한 후 <B>검사 시작</B>을 누르거" -"나\n" +"<P>드라이브를 선택하고, 드라이브에 매체를 삽입한 후 <B>검사 시작</B>을 누르거나\n" "<B>ISO 파일 검사</B>를 사용하고 ISO 파일을 선택하십시오.\n" "드라이브 속도와 매체의 크기에 따라 검사하는 데 몇 분이\n" "걸릴 수 있습니다. 이 과정에서 MD5 체크섬을 검사합니다.</P>" -#. help text - media check 4/8 -#: src/include/checkmedia/ui.rb:317 +#. help text - media check 4/8 +#: src/include/checkmedia/ui.rb:317 msgid "" -"<P>If the check of the medium fails, you should not continue the " -"installation.\n" -"It may fail or you may lose your data. Better replace the broken medium.\n" +"<P>If the check of the medium fails, you should not continue the installation.\n" +"It may fail or you may lose your data. Better replace the broken medium.</P>\n" msgstr "" "<P>미디어 확인에 실패할 경우 설치를 계속하면 안 됩니다.\n" -"실패하거나 데이터가 손실될 수 있습니다. 손상된 미디어를 교체하는 것이 좋습니" -"다.</P>\n" +"실패하거나 데이터가 손실될 수 있습니다. 손상된 미디어를 교체하는 것이 좋습니다.</P>\n" -#. help text - media check 5/8 -#: src/include/checkmedia/ui.rb:321 +#. help text - media check 5/8 +#: src/include/checkmedia/ui.rb:321 msgid "" "After the check, insert the next medium and start the procedure again. \n" "The order of the media is irrelevant.\n" @@ -697,38 +671,28 @@ "확인 후 다음 미디어를 삽입하고 절차를 다시 시작하십시오. \n" "미디어 순서는 관련이 없습니다.\n" -#. help text - media check 6/8 -#: src/include/checkmedia/ui.rb:325 -msgid "" -"<P><B>Note:</B> You cannot change the medium while it is used by the system." -"</P>" -msgstr "" -"<P><B>참고:</B> 시스템에서 매체를 사용하는 동안에는 매체를 변경할 수 없습니" -"다.</P>" +#. help text - media check 6/8 +#: src/include/checkmedia/ui.rb:325 +msgid "<P><B>Note:</B> You cannot change the medium while it is used by the system.</P>" +msgstr "<P><B>참고:</B> 시스템에서 매체를 사용하는 동안에는 매체를 변경할 수 없습니다.</P>" -#. help text - media check 7/8 -#: src/include/checkmedia/ui.rb:329 -msgid "" -"<P>To check media before the installation, use the media check item in the " -"boot menu.</P>" -msgstr "" -"<P>설치 전에 미디어를 확인하려면 부트 메뉴의 미디어 확인 항목을 사용하십시오." -"</P>" +#. help text - media check 7/8 +#: src/include/checkmedia/ui.rb:329 +msgid "<P>To check media before the installation, use the media check item in the boot menu.</P>" +msgstr "<P>설치 전에 미디어를 확인하려면 부트 메뉴의 미디어 확인 항목을 사용하십시오.</P>" -#. help text - media check 8/8 -#: src/include/checkmedia/ui.rb:333 +#. help text - media check 8/8 +#: src/include/checkmedia/ui.rb:333 msgid "" -"<P>If you burn the media yourself, use the <B>pad</B> option in your " -"recording\n" -"software. It avoids read errors at the end of the media during the check.\n" +"<P>If you burn the media yourself, use the <B>pad</B> option in your recording\n" +"software. It avoids read errors at the end of the media during the check.</P>\n" msgstr "" "<P>미디어를 직접 굽는 경우 기록 소프트웨어의 <B>패드</B> 옵션을\n" "사용하십시오. 확인 중 미디어 끝의 읽기 오류가 방지됩니다.</P>\n" -#. advice check of the media -#. for translators: split the message to more lines if needed, use max. 50 characters per line -#: src/include/checkmedia/ui.rb:339 +#. advice check of the media +#. for translators: split the message to more lines if needed, use max. 50 characters per line +#: src/include/checkmedia/ui.rb:339 msgid "" "It is recommended to check all installation media\n" "to avoid installation problems. To skip this step press 'Next'" @@ -736,46 +700,46 @@ "설치 문제가 발생하지 않도록 모든 설치 미디어를\n" "확인하는 것이 좋습니다. 건너뛰려면 '다음'을 누르십시오." -#. combo box -#: src/include/checkmedia/ui.rb:352 +#. combo box +#: src/include/checkmedia/ui.rb:352 msgid "&CD or DVD Drive" msgstr "CD 또는 DVD 드라이브(&D)" -#. push button label -#: src/include/checkmedia/ui.rb:360 +#. push button label +#: src/include/checkmedia/ui.rb:360 msgid "&Start Check" msgstr "확인 시작(&S)" -#: src/include/checkmedia/ui.rb:361 src/modules/SourceManager.rb:685 +#: src/include/checkmedia/ui.rb:361 src/modules/SourceManager.rb:685 msgid "&Eject" msgstr "꺼냄(&E)" -#. push button label -#: src/include/checkmedia/ui.rb:367 +#. push button label +#: src/include/checkmedia/ui.rb:367 msgid "Check ISO File..." msgstr "ISO 파일 확인..." -#. widget label -#: src/include/checkmedia/ui.rb:370 +#. widget label +#: src/include/checkmedia/ui.rb:370 msgid "Status Information" msgstr "상태 정보" -#. progress bar label -#: src/include/checkmedia/ui.rb:374 +#. progress bar label +#: src/include/checkmedia/ui.rb:374 msgid "Progress" msgstr "진행률" -#. window title - open file dialog -#: src/include/checkmedia/ui.rb:421 +#. window title - open file dialog +#: src/include/checkmedia/ui.rb:421 msgid "Select an ISO File to Check" msgstr "확인할 ISO 파일 선택" -#. error message: the medium cannot be read or no medium in the drive; %1 = drive, e.g. /dev/hdc -#: src/include/checkmedia/ui.rb:461 +#. error message: the medium cannot be read or no medium in the drive; %1 = drive, e.g. /dev/hdc +#: src/include/checkmedia/ui.rb:461 msgid "Cannot read medium in drive %1." msgstr "%1 드라이브에서 미디어를 읽을 수 없습니다." -#: src/include/checkmedia/ui.rb:471 +#: src/include/checkmedia/ui.rb:471 msgid "" "The medium does not contain a MD5 checksum.\n" "The content of the medium cannot be verified.\n" @@ -787,83 +751,83 @@ "\n" "매체의 가독성만 확인됩니다.\n" -#: src/include/checkmedia/ui.rb:530 +#: src/include/checkmedia/ui.rb:530 msgid "<B>Canceled</B>" msgstr "<B>취소됨</B>" -#. escape <> characters in the key name -#. translators: %1 is GPG key name (e.g. 'SuSE Package Signing Key ') -#: src/include/packager/key_manager_dialogs.rb:48 +#. escape <> characters in the key name +#. translators: %1 is GPG key name (e.g. 'SuSE Package Signing Key ') +#: src/include/packager/key_manager_dialogs.rb:48 msgid "Name: %1" msgstr "이름: %1" -#. %1 is a GPG Key fingerprint (e.g. '79C179B2E1C820C1890F9994A84EDAE89C800ACA') -#: src/include/packager/key_manager_dialogs.rb:56 +#. %1 is a GPG Key fingerprint (e.g. '79C179B2E1C820C1890F9994A84EDAE89C800ACA') +#: src/include/packager/key_manager_dialogs.rb:56 msgid "Finger Print: %1" msgstr "지문: %1" -#. %1 is the date when the GPG key was generated (e.g. '9.10.2000') -#: src/include/packager/key_manager_dialogs.rb:63 +#. %1 is the date when the GPG key was generated (e.g. '9.10.2000') +#: src/include/packager/key_manager_dialogs.rb:63 msgid "Created: %1" msgstr "생성: %1" -#. %1 is the date when the GPG key expired (e.g. '10.6.2005'), display the date in red -#: src/include/packager/key_manager_dialogs.rb:70 +#. %1 is the date when the GPG key expired (e.g. '10.6.2005'), display the date in red +#: src/include/packager/key_manager_dialogs.rb:70 msgid "Expires: %1</font> (The key is expired.)" msgstr "만료: %1</font> (키가 만료되었습니다.)" -#. summary string - the GPG key never expires -#: src/include/packager/key_manager_dialogs.rb:75 +#. summary string - the GPG key never expires +#: src/include/packager/key_manager_dialogs.rb:75 msgid "The key never expires." msgstr "키는 만료되지 않습니다." -#. %1 is the date when the GPG key expires (e.g. '21.3.2015') or "Never" -#: src/include/packager/key_manager_dialogs.rb:78 +#. %1 is the date when the GPG key expires (e.g. '21.3.2015') or "Never" +#: src/include/packager/key_manager_dialogs.rb:78 msgid "Expires: %1" msgstr "만료: %1" -#: src/include/packager/key_manager_dialogs.rb:95 +#: src/include/packager/key_manager_dialogs.rb:95 msgid "Key: %1" msgstr "키: %1" -#. Display a dialog for adding a GPG key -#: src/include/packager/key_manager_dialogs.rb:164 +#. Display a dialog for adding a GPG key +#: src/include/packager/key_manager_dialogs.rb:164 msgid "Select a GPG Key" msgstr "GPG 키 선택" -#: src/include/packager/key_manager_dialogs.rb:178 +#: src/include/packager/key_manager_dialogs.rb:178 msgid "Properties of the GPG Key" msgstr "GPG 키 속성" -#: src/include/packager/key_manager_dialogs.rb:185 +#: src/include/packager/key_manager_dialogs.rb:185 msgid "Key ID: " msgstr "키 ID:" -#: src/include/packager/key_manager_dialogs.rb:186 +#: src/include/packager/key_manager_dialogs.rb:186 msgid "Name: " msgstr "이름:" -#: src/include/packager/key_manager_dialogs.rb:187 +#: src/include/packager/key_manager_dialogs.rb:187 msgid "Finger Print: " msgstr "지문:" -#: src/include/packager/key_manager_dialogs.rb:188 +#: src/include/packager/key_manager_dialogs.rb:188 msgid "Created: " msgstr "생성:" -#: src/include/packager/key_manager_dialogs.rb:189 +#: src/include/packager/key_manager_dialogs.rb:189 msgid "Expires: " msgstr "만료:" -#. dialog caption -#: src/include/packager/key_manager_dialogs.rb:205 +#. dialog caption +#: src/include/packager/key_manager_dialogs.rb:205 msgid "Adding a GPG Public Key" msgstr "GPG 공용 키 추가 " -#. help -#. help -#: src/include/packager/key_manager_dialogs.rb:208 -#: src/include/packager/key_manager_dialogs.rb:281 +#. help +#. help +#: src/include/packager/key_manager_dialogs.rb:208 +#: src/include/packager/key_manager_dialogs.rb:281 msgid "" "<p>\n" "Manage known GPG public keys.</p>\n" @@ -871,7 +835,7 @@ "<p>\n" "알려진 GPG 공개 키를 관리하십시오.</p>\n" -#: src/include/packager/key_manager_dialogs.rb:212 +#: src/include/packager/key_manager_dialogs.rb:212 msgid "" "<p>\n" "<b>Adding a New GPG Key</b><br>\n" @@ -883,22 +847,22 @@ "새 GPG 키를 추가하려면 키 파일의 경로를 지정하십시오.\n" "</p>\n" -#. header in file selection popup -#: src/include/packager/key_manager_dialogs.rb:235 +#. header in file selection popup +#: src/include/packager/key_manager_dialogs.rb:235 msgid "Select a GPG Key To Import" msgstr "가져올 GPG 키 선택" -#. validate the entered file -#: src/include/packager/key_manager_dialogs.rb:255 +#. validate the entered file +#: src/include/packager/key_manager_dialogs.rb:255 msgid "Enter a filename" msgstr "파일 이름 입력" -#. dialog caption -#: src/include/packager/key_manager_dialogs.rb:278 +#. dialog caption +#: src/include/packager/key_manager_dialogs.rb:278 msgid "GPG Public Key Management" msgstr "GPG 공용 키 관리" -#: src/include/packager/key_manager_dialogs.rb:285 +#: src/include/packager/key_manager_dialogs.rb:285 msgid "" "<p>\n" "<b>Adding a New GPG Key</b><br>\n" @@ -907,12 +871,11 @@ msgstr "" "<p>\n" "<b>새 GPG 키 추가</b><br>\n" -"새 GPG 키를 추가하려면 <b>추가</b>를 사용하여 키 파일의 경로를 지정하십시" -"오.\n" +"새 GPG 키를 추가하려면 <b>추가</b>를 사용하여 키 파일의 경로를 지정하십시오.\n" "</p>" -#. help, continued -#: src/include/packager/key_manager_dialogs.rb:296 +#. help, continued +#: src/include/packager/key_manager_dialogs.rb:296 msgid "" "<p>\n" "<b>Modifying a GPG Key Status</b>\n" @@ -926,13 +889,13 @@ "제거하려면 <b>삭제</b>를 사용하십시오.\n" "</p>\n" -#. table header -#: src/include/packager/key_manager_dialogs.rb:306 +#. table header +#: src/include/packager/key_manager_dialogs.rb:306 msgid "Key ID" msgstr "키 ID" -#. remove the key -#: src/include/packager/key_manager_dialogs.rb:338 +#. remove the key +#: src/include/packager/key_manager_dialogs.rb:338 msgid "" "Really delete key '%1'\n" "'%2'?" @@ -940,44 +903,44 @@ "'%1' '%2' 키를 삭제하시겠습니까\n" "?" -#. TRANSLATORS: dialog caption -#: src/include/packager/repositories_include.rb:79 +#. TRANSLATORS: dialog caption +#: src/include/packager/repositories_include.rb:79 msgid "Adding a New Repository" msgstr "새 리포지토리 추가 중" -#: src/include/packager/repositories_include.rb:83 +#: src/include/packager/repositories_include.rb:83 msgid "Check Repository Type" msgstr "리포지토리 유형 확인" -#: src/include/packager/repositories_include.rb:84 +#: src/include/packager/repositories_include.rb:84 msgid "Add Repository" msgstr "리포지토리 추가" -#: src/include/packager/repositories_include.rb:85 +#: src/include/packager/repositories_include.rb:85 msgid "Read Repository License" msgstr "리포지토리 라이센스 읽기" -#: src/include/packager/repositories_include.rb:88 +#: src/include/packager/repositories_include.rb:88 msgid "Checking Repository Type" msgstr "리포지토리 유형 확인 중" -#: src/include/packager/repositories_include.rb:89 +#: src/include/packager/repositories_include.rb:89 msgid "Adding Repository" msgstr "리포지토리 추가 중" -#: src/include/packager/repositories_include.rb:90 +#: src/include/packager/repositories_include.rb:90 msgid "Reading Repository License" msgstr "리포지토리 라이센스 읽는 중" -#. add at least one product if the scan result is empty (no product info available) -#: src/include/packager/repositories_include.rb:146 +#. add at least one product if the scan result is empty (no product info available) +#: src/include/packager/repositories_include.rb:146 msgid "Repository" msgstr "리포지토리" -#. continue-back popup -#. continue-back popup -#: src/include/packager/repositories_include.rb:194 -#: src/modules/SourceManager.rb:330 +#. continue-back popup +#. continue-back popup +#: src/include/packager/repositories_include.rb:194 +#: src/modules/SourceManager.rb:330 msgid "" "There is no product information available at the given location.\n" "If you expected to to point a product, go back and enter\n" @@ -991,10 +954,10 @@ "지정된 위치에 있는 rpm 패키지를 패키지 선택에서\n" "사용할 수 있게 하려면 계속하십시오.\n" -#. popup message part 1 -#. Import GPG keys found in the inst-sys -#: src/include/packager/repositories_include.rb:287 -#: src/modules/Packages.rb:1206 src/modules/SourceManager.rb:306 +#. popup message part 1 +#. Import GPG keys found in the inst-sys +#: src/include/packager/repositories_include.rb:287 +#: src/modules/Packages.rb:1206 src/modules/SourceManager.rb:306 msgid "" "Unable to create repository\n" "from URL '%1'." @@ -1002,8 +965,8 @@ "URL '%1'에서 리포지토리를\n" "생성할 수 없습니다." -#. error message -#: src/include/packager/repositories_include.rb:299 +#. error message +#: src/include/packager/repositories_include.rb:299 msgid "" "Using an ISO image over ftp or http protocol is not possible.\n" "Change the protocol or unpack the ISO image on the server side." @@ -1011,13 +974,13 @@ "Ftp 또는 http 프로토콜을 통한 ISO 이미지를 사용할 수 없습니다.\n" "프로토콜을 변경하거나 서버 측 ISO 이미지 압축을 푸십시오." -#. popup message part 2 -#: src/include/packager/repositories_include.rb:309 +#. popup message part 2 +#: src/include/packager/repositories_include.rb:309 msgid "Change the URL and try again?" msgstr "URL을 변경하고 다시 시도하시겠습니까?" -#. popup error message, %1 is the package name -#: src/include/packager/repositories_include.rb:386 +#. popup error message, %1 is the package name +#: src/include/packager/repositories_include.rb:386 msgid "" "Cannot search for SLP repositories\n" "without having %1 package installed.\n" @@ -1025,207 +988,203 @@ "%1 패키지가 설치되어 있지 않으면\n" "SLP 리포지토리를 검색할 수 없습니다.\n" -#. @see Implements ::Installation::FinishClient#title -#: src/lib/packager/clients/pkg_finish.rb:57 +#. @see Implements ::Installation::FinishClient#title +#: src/lib/packager/clients/pkg_finish.rb:57 msgid "Saving the software manager configuration..." msgstr "소프트웨어 관리자 구성을 저장하는 중입니다." -#. default (minimal) priority of a repository -#: src/lib/packager/clients/repositories.rb:63 +#. default (minimal) priority of a repository +#: src/lib/packager/clients/repositories.rb:63 msgid "&Priority" msgstr "우선순위(&P)" -#: src/lib/packager/clients/repositories.rb:65 +#: src/lib/packager/clients/repositories.rb:65 msgid "Keep Downloaded Packages" msgstr "다운로드된 패키지 저장" -#. Command line help text for the repository module, %1 is "zypper" -#: src/lib/packager/clients/repositories.rb:80 -msgid "" -"Installation Repositories - This module does not support the command line " -"interface, use '%1' instead." -msgstr "" -"설치 리포지토리 - 이 모듈은 명령줄 인터페이스를 지원하지 않습니다. 대신 " -"'%1'을(를) 사용하십시오." +#. Command line help text for the repository module, %1 is "zypper" +#: src/lib/packager/clients/repositories.rb:80 +msgid "Installation Repositories - This module does not support the command line interface, use '%1' instead." +msgstr "설치 리포지토리 - 이 모듈은 명령줄 인터페이스를 지원하지 않습니다. 대신 '%1'을(를) 사용하십시오." -#. pad to 3 characters -#: src/lib/packager/clients/repositories.rb:174 +#. pad to 3 characters +#: src/lib/packager/clients/repositories.rb:174 msgid "Default" msgstr "기본값" -#. unkown name (alias) of the source -#. get the editable propertis from 'source' parameter, -#. get the fixed propertis from the package manager -#: src/lib/packager/clients/repositories.rb:204 -#: src/lib/packager/clients/repositories.rb:269 +#. unkown name (alias) of the source +#. get the editable propertis from 'source' parameter, +#. get the fixed propertis from the package manager +#: src/lib/packager/clients/repositories.rb:204 +#: src/lib/packager/clients/repositories.rb:269 msgid "Unknown Name" msgstr "알 수 없는 이름" -#. displaye only repositories from the selected service -#: src/lib/packager/clients/repositories.rb:339 -#: src/lib/packager/clients/repositories.rb:340 -#: src/lib/packager/clients/repositories.rb:382 -#: src/lib/packager/clients/repositories.rb:388 -#: src/modules/SourceManager.rb:436 +#. displaye only repositories from the selected service +#: src/lib/packager/clients/repositories.rb:339 +#: src/lib/packager/clients/repositories.rb:340 +#: src/lib/packager/clients/repositories.rb:382 +#: src/lib/packager/clients/repositories.rb:388 +#: src/modules/SourceManager.rb:436 msgid "Unknown" msgstr "알수 없음`" -#. label to be used instead of URL if not found -#: src/lib/packager/clients/repositories.rb:342 -#: src/lib/packager/clients/repositories.rb:381 -#: src/modules/AddOnProduct.rb:1366 +#. label to be used instead of URL if not found +#: src/lib/packager/clients/repositories.rb:342 +#: src/lib/packager/clients/repositories.rb:381 +#: src/modules/AddOnProduct.rb:1366 msgid "URL: %1" msgstr "URL: %1" -#. TRANSLATORS: Raw URL is the address without expanding repo variables -#. e.g. Raw URL = http://something/$arch -> URL = http://something/x86_64 -#: src/lib/packager/clients/repositories.rb:347 +#. TRANSLATORS: Raw URL is the address without expanding repo variables +#. e.g. Raw URL = http://something/$arch -> URL = http://something/x86_64 +#: src/lib/packager/clients/repositories.rb:347 msgid "Raw URL: %s" msgstr "원본 URL: %s" -#. heading - in case repo name not found -#: src/lib/packager/clients/repositories.rb:377 +#. heading - in case repo name not found +#: src/lib/packager/clients/repositories.rb:377 msgid "Unknown Repository Name" msgstr "알 수 없는 리포지토리 이름" -#. label, %1 is repo category (eg. YUM) -#: src/lib/packager/clients/repositories.rb:387 +#. label, %1 is repo category (eg. YUM) +#: src/lib/packager/clients/repositories.rb:387 msgid "Category: %1" msgstr "범주: %1" -#. label, %1 is repo category (eg. YUM) -#: src/lib/packager/clients/repositories.rb:397 +#. label, %1 is repo category (eg. YUM) +#: src/lib/packager/clients/repositories.rb:397 msgid "Service: %1" msgstr "서비스: %1" -#. #176013 -#: src/lib/packager/clients/repositories.rb:656 +#. #176013 +#: src/lib/packager/clients/repositories.rb:656 msgid "All repositories" msgstr "모든 리포지토리" -#: src/lib/packager/clients/repositories.rb:659 +#: src/lib/packager/clients/repositories.rb:659 msgid "All services" msgstr "모든 서비스" -#: src/lib/packager/clients/repositories.rb:668 +#: src/lib/packager/clients/repositories.rb:668 msgid "Service '%1'" msgstr "서비스 '%1'" -#. TRANSLATORS: Item in selection box that allow user to see only -#. repositories not associated with service. Sometimes called also -#. third party as they are usually repositories not provided by SUSE -#. within product subscription. -#: src/lib/packager/clients/repositories.rb:685 +#. TRANSLATORS: Item in selection box that allow user to see only +#. repositories not associated with service. Sometimes called also +#. third party as they are usually repositories not provided by SUSE +#. within product subscription. +#: src/lib/packager/clients/repositories.rb:685 msgid "Only repositories not provided by a service" msgstr "서비스에서 제공하지 않는 리포지토리만" -#. combobox label -#: src/lib/packager/clients/repositories.rb:697 +#. combobox label +#: src/lib/packager/clients/repositories.rb:697 msgid "View" msgstr "보기" -#. table header - priority of the repository - keep the translation as short as possible! -#: src/lib/packager/clients/repositories.rb:712 +#. table header - priority of the repository - keep the translation as short as possible! +#: src/lib/packager/clients/repositories.rb:712 msgid "Priority" msgstr "우선순위" -#. table header - is the repo enabled? - keep the translation as short as possible! -#. table header - is the repo enabled? - keep the translation as short as possible! -#. status info, to be used inside summary -#: src/lib/packager/clients/repositories.rb:714 -#: src/lib/packager/clients/repositories.rb:727 -#: src/modules/SourceManager.rb:393 +#. table header - is the repo enabled? - keep the translation as short as possible! +#. table header - is the repo enabled? - keep the translation as short as possible! +#. status info, to be used inside summary +#: src/lib/packager/clients/repositories.rb:714 +#: src/lib/packager/clients/repositories.rb:727 +#: src/modules/SourceManager.rb:393 msgid "Enabled" msgstr "활성화" -#. table header - is autorefresh enabled for the repo? -#. keep the translation as short as possible! -#. table header - is autorefresh enabled for the repo? -#. keep the translation as short as possible! -#: src/lib/packager/clients/repositories.rb:717 -#: src/lib/packager/clients/repositories.rb:730 +#. table header - is autorefresh enabled for the repo? +#. keep the translation as short as possible! +#. table header - is autorefresh enabled for the repo? +#. keep the translation as short as possible! +#: src/lib/packager/clients/repositories.rb:717 +#: src/lib/packager/clients/repositories.rb:730 msgid "Autorefresh" msgstr "자동 새로 고침" -#. table header - service to which the repo belongs -#: src/lib/packager/clients/repositories.rb:721 +#. table header - service to which the repo belongs +#: src/lib/packager/clients/repositories.rb:721 msgid "Service" msgstr "서비스" -#. table header - URL of the repo -#. table header - URL of the repo -#: src/lib/packager/clients/repositories.rb:723 -#: src/lib/packager/clients/repositories.rb:734 +#. table header - URL of the repo +#. table header - URL of the repo +#: src/lib/packager/clients/repositories.rb:723 +#: src/lib/packager/clients/repositories.rb:734 msgid "URL" msgstr "URL" -#. push button - change URL of the selected repository -#: src/lib/packager/clients/repositories.rb:834 +#. push button - change URL of the selected repository +#: src/lib/packager/clients/repositories.rb:834 msgid "&Replace..." msgstr "대체(&R)" -#. push button - refresh the selected repository now -#: src/lib/packager/clients/repositories.rb:836 +#. push button - refresh the selected repository now +#: src/lib/packager/clients/repositories.rb:836 msgid "Re&fresh Selected" msgstr "새로 고침 선택됨(&F)" -#. push button - disable/enable the selected repository -#: src/lib/packager/clients/repositories.rb:838 +#. push button - disable/enable the selected repository +#: src/lib/packager/clients/repositories.rb:838 msgid "Status &on or off" msgstr "상태 켜짐 또는 꺼짐(&O)" -#. push button - disable/enable automatic refresh of the selected repository -#: src/lib/packager/clients/repositories.rb:840 +#. push button - disable/enable automatic refresh of the selected repository +#: src/lib/packager/clients/repositories.rb:840 msgid "Refre&sh on or off" msgstr "새로 고침 켜짐 또는 꺼짐(&S)" -#. push button - set name of the selected repository -#: src/lib/packager/clients/repositories.rb:842 +#. push button - set name of the selected repository +#: src/lib/packager/clients/repositories.rb:842 msgid "Set &Name..." msgstr "이름 설정(&N)..." -#. label -#: src/lib/packager/clients/repositories.rb:849 +#. label +#: src/lib/packager/clients/repositories.rb:849 msgid "Properties" msgstr "속성" -#. check box -#: src/lib/packager/clients/repositories.rb:854 +#. check box +#: src/lib/packager/clients/repositories.rb:854 msgid "&Enabled" msgstr "활성화(&E)" -#. check box -#: src/lib/packager/clients/repositories.rb:860 +#. check box +#: src/lib/packager/clients/repositories.rb:860 msgid "Automatically &Refresh" msgstr "자동 새로 고침(&R)" -#. push button label -#: src/lib/packager/clients/repositories.rb:898 +#. push button label +#: src/lib/packager/clients/repositories.rb:898 msgid "&GPG Keys..." msgstr "GPG 키(&G)..." -#. menu button label -#: src/lib/packager/clients/repositories.rb:903 +#. menu button label +#: src/lib/packager/clients/repositories.rb:903 msgid "Refresh" msgstr "새로 고침" -#. menu button label -#: src/lib/packager/clients/repositories.rb:907 +#. menu button label +#: src/lib/packager/clients/repositories.rb:907 msgid "Refresh all Autor&efreshed" msgstr "모두 새로 고침 자동 새로 고침(&E)" -#. menu button label -#: src/lib/packager/clients/repositories.rb:909 +#. menu button label +#: src/lib/packager/clients/repositories.rb:909 msgid "Refresh all &Enabled" msgstr "모두 새로 고침 활성화됨(&E)" -#. dialog caption -#: src/lib/packager/clients/repositories.rb:916 +#. dialog caption +#: src/lib/packager/clients/repositories.rb:916 msgid "Configured Software Repositories" msgstr "구성된 소프트웨어 리포지토리" -#. help -#: src/lib/packager/clients/repositories.rb:919 +#. help +#: src/lib/packager/clients/repositories.rb:919 msgid "" "<p>\n" "Manage configured software repositories and services.</p>\n" @@ -1233,37 +1192,26 @@ "<p>\n" "구성된 소프트웨어 리포지토리 및 서비스를 관리하십시오.</p>\n" -#: src/lib/packager/clients/repositories.rb:925 -msgid "" -"<P>A <B>service</B> or <B>Repository Index Service (RIS) </B> is a protocol " -"for package repository management. A service can offer one or more software " -"repositories which can be dynamically changed by the service administrator." -msgstr "" -"<P><B>서비스</B> 또는 <B>리포지토리 색인 서비스(RIS)</B>는 패키지 리포지토리 " -"관리를 위한 프로토콜입니다. 이 서비스는 서비스 관리자가 동적으로 변경할 수 있" -"는 하나 이상의 소프트웨어 리포지토리를 제공할 수 있습니다.</P>" +#: src/lib/packager/clients/repositories.rb:925 +msgid "<P>A <B>service</B> or <B>Repository Index Service (RIS) </B> is a protocol for package repository management. A service can offer one or more software repositories which can be dynamically changed by the service administrator.</P>" +msgstr "<P><B>서비스</B> 또는 <B>리포지토리 색인 서비스(RIS)</B>는 패키지 리포지토리 관리를 위한 프로토콜입니다. 이 서비스는 서비스 관리자가 동적으로 변경할 수 있는 하나 이상의 소프트웨어 리포지토리를 제공할 수 있습니다.</P>" -#: src/lib/packager/clients/repositories.rb:932 +#: src/lib/packager/clients/repositories.rb:932 msgid "" "<p>\n" "<b>Adding a new Repository or a Service</b><br>\n" -"To add a new repository, use <b>Add</b> and specify the software repository " -"or service.\n" -"YaST will automatically detect whether a service or a repository is " -"available at the entered location.\n" +"To add a new repository, use <b>Add</b> and specify the software repository or service.\n" +"YaST will automatically detect whether a service or a repository is available at the entered location.\n" "</p>\n" msgstr "" "<p>\n" "<b>새 리포지토리 또는 서비스 추가</b><br>\n" -"새 리포지토리를 추가하려면 <b>추가</b>를 사용하고 소프트웨어 리포지토리 또는 " -"서비스를 지정하십시오.\n" -"YaST가 입력된 위치에서 서비스 또는 리포지토리를 사용할 수 있는지 여부를 자동" -"으로 검색합니다.\n" +"새 리포지토리를 추가하려면 <b>추가</b>를 사용하고 소프트웨어 리포지토리 또는 서비스를 지정하십시오.\n" +"YaST가 입력된 위치에서 서비스 또는 리포지토리를 사용할 수 있는지 여부를 자동으로 검색합니다.\n" "</p>\n" -#. help, continued -#: src/lib/packager/clients/repositories.rb:944 +#. help, continued +#: src/lib/packager/clients/repositories.rb:944 msgid "" "<p>\n" "To install packages from <b>CD</b>,\n" @@ -1275,8 +1223,8 @@ "CD 세트 또는 DVD를 사용할 수 있도록 설정하십시오.\n" "</p>\n" -#. help, continued -#: src/lib/packager/clients/repositories.rb:955 +#. help, continued +#: src/lib/packager/clients/repositories.rb:955 msgid "" "<p>\n" "The CDs can be copied to <b>hard disk</b>\n" @@ -1296,72 +1244,52 @@ "기본 경로만 필요합니다.\n" "</p>\n" -#. help, continued -#: src/lib/packager/clients/repositories.rb:971 +#. help, continued +#: src/lib/packager/clients/repositories.rb:971 msgid "" "<p>\n" "<b>Modifying Status of a Repository or a Service</b><br>\n" -"To change a repository location, use <b>Edit</b>. To remove a repository, " -"use\n" -"<b>Delete</b>. To enable or disable the repository or to change the refresh " -"status at initialization time, select the repository in the table and use " -"the check boxes below.\n" +"To change a repository location, use <b>Edit</b>. To remove a repository, use\n" +"<b>Delete</b>. To enable or disable the repository or to change the refresh status at initialization time, select the repository in the table and use the check boxes below.\n" "</p>\n" msgstr "" "<p>\n" "<b>리포지토리 또는 서비스 상태 수정</b><br>\n" -"리포지토리 위치를 변경하려면 <b>편집</b>을 사용합니다. 리포지토리를 제거하려" -"면 \n" -"<b>삭제</b>를 사용합니다. 리포지토리를 활성화 또는 비활성화하거나 초기화 시간" -"으로 상태를 새로 고치려면 테이블에서 리포지토리를 선택하고 아래의 상자를 선택" -"합니다.\n" +"리포지토리 위치를 변경하려면 <b>편집</b>을 사용합니다. 리포지토리를 제거하려면 \n" +"<b>삭제</b>를 사용합니다. 리포지토리를 활성화 또는 비활성화하거나 초기화 시간으로 상태를 새로 고치려면 테이블에서 리포지토리를 선택하고 아래의 상자를 선택합니다.\n" "</p>\n" -#. help text, continued -#: src/lib/packager/clients/repositories.rb:983 +#. help text, continued +#: src/lib/packager/clients/repositories.rb:983 msgid "" "<P><B>Priority of a Repository</B><BR>\n" -"Priority of a repository is an integer value between 0 (the highest " -"priority) and 200 (the lowest priority). Default is 99. If a package is " -"available in more repositories, the repository with the highest priority is " -"used.</P>\n" +"Priority of a repository is an integer value between 0 (the highest priority) and 200 (the lowest priority). Default is 99. If a package is available in more repositories, the repository with the highest priority is used.</P>\n" msgstr "" "<P><B>리포지토리 우선순위</B><BR>\n" -"리포지토리 우선순위는 0(최고 우선순위)과 200(최저 우선순위) 사이의 정수 값입" -"니다. 기본값은 99입니다. 추가 리포지토리에서 패키지를 사용할 수 있는 경우 최" -"고 우선순위의 리포지토리가 사용됩니다.</P>\n" +"리포지토리 우선순위는 0(최고 우선순위)과 200(최저 우선순위) 사이의 정수 값입니다. 기본값은 99입니다. 추가 리포지토리에서 패키지를 사용할 수 있는 경우 최고 우선순위의 리포지토리가 사용됩니다.</P>\n" -#. help text, continued -#: src/lib/packager/clients/repositories.rb:991 -msgid "" -"<P>Select the appropriate option on top of the window for navigation in " -"repositories and services.</P>" -msgstr "" -"<P>저장소 및 서비스 내 탐색 창 상단에 있는 적당한 옵션을 선택하십시오.</P>" +#. help text, continued +#: src/lib/packager/clients/repositories.rb:991 +msgid "<P>Select the appropriate option on top of the window for navigation in repositories and services.</P>" +msgstr "<P>저장소 및 서비스 내 탐색 창 상단에 있는 적당한 옵션을 선택하십시오.</P>" -#. help text, continued -#: src/lib/packager/clients/repositories.rb:999 +#. help text, continued +#: src/lib/packager/clients/repositories.rb:999 msgid "" "<P><B>Keep Downloaded Packages</B><BR>Check this option to keep downloaded\n" "packages in a local cache so they can be reused later when the packages are\n" -"reinstalled. If not checked, the downloaded packages are deleted after " -"installation.</P>" +"reinstalled. If not checked, the downloaded packages are deleted after installation.</P>" msgstr "" -"<P><B>다운로드된 패키지 저장</B><BR>패키지를 다시 설치할 때 나중에 재사용할 " -"수 있도록\n" +"<P><B>다운로드된 패키지 저장</B><BR>패키지를 다시 설치할 때 나중에 재사용할 수 있도록\n" "다운로드된 패키지를 로컬 캐시에 저장하려면 이 옵션을\n" "선택합니다. 선택하지 않으면 다운로드된 패키지가 설치 후 삭제됩니다.</P>" -#: src/lib/packager/clients/repositories.rb:1005 -msgid "" -"<P>The default local cache is located in directory <B>/var/cache/zypp/" -"packages</B>. Change the location in <B>/etc/zypp/zypp.conf</B> file.</P>" -msgstr "" -"<P>기본 로컬 캐시는 <B>/var/cache/zypp/packages</B> 디렉토리에 있습니다. <B>/" -"etc/zypp/zypp.conf</B> 파일에서 위치를 변경하십시오.</P>" +#: src/lib/packager/clients/repositories.rb:1005 +msgid "<P>The default local cache is located in directory <B>/var/cache/zypp/packages</B>. Change the location in <B>/etc/zypp/zypp.conf</B> file.</P>" +msgstr "<P>기본 로컬 캐시는 <B>/var/cache/zypp/packages</B> 디렉토리에 있습니다. <B>/etc/zypp/zypp.conf</B> 파일에서 위치를 변경하십시오.</P>" -#. popup message part 1 -#: src/lib/packager/clients/repositories.rb:1050 +#. popup message part 1 +#: src/lib/packager/clients/repositories.rb:1050 msgid "" "Unable to save changes to the repository\n" "configuration." @@ -1369,28 +1297,28 @@ "리포지토리 구성의 변경사항을 저장할 수\n" "없습니다." -#. popup message part 2 followed by other info -#. popup message, after message header, header of details -#: src/lib/packager/clients/repositories.rb:1056 src/modules/Packages.rb:1211 -#: src/modules/SourceManager.rb:162 src/modules/SourceManager.rb:310 +#. popup message part 2 followed by other info +#. popup message, after message header, header of details +#: src/lib/packager/clients/repositories.rb:1056 src/modules/Packages.rb:1211 +#: src/modules/SourceManager.rb:162 src/modules/SourceManager.rb:310 msgid "Details:" msgstr "세부 사항" -#. popup message part 3 -#. end of popup message, question -#. end of popup message, question -#: src/lib/packager/clients/repositories.rb:1058 src/modules/Packages.rb:1219 -#: src/modules/SourceManager.rb:164 src/modules/SourceManager.rb:312 +#. popup message part 3 +#. end of popup message, question +#. end of popup message, question +#: src/lib/packager/clients/repositories.rb:1058 src/modules/Packages.rb:1219 +#: src/modules/SourceManager.rb:164 src/modules/SourceManager.rb:312 msgid "Try again?" msgstr "다시 시도하시겠습니까?" -#. popup headline -#: src/lib/packager/clients/repositories.rb:1075 +#. popup headline +#: src/lib/packager/clients/repositories.rb:1075 msgid "Abort Repository Configuration" msgstr "리포지토리 구성 중단" -#. popup message -#: src/lib/packager/clients/repositories.rb:1077 +#. popup message +#: src/lib/packager/clients/repositories.rb:1077 msgid "" "Abort the repository configuration?\n" "All changes will be lost." @@ -1398,36 +1326,36 @@ "리포지토리 구성을 중단하시겠습니까?\n" "모든 변경사항이 취소됩니다." -#. TODO: add help text -#: src/lib/packager/clients/repositories.rb:1256 +#. TODO: add help text +#: src/lib/packager/clients/repositories.rb:1256 msgid "Refreshing Repositories" msgstr "리포지토리를 새로 고치는 중" -#: src/lib/packager/clients/repositories.rb:1257 +#: src/lib/packager/clients/repositories.rb:1257 msgid "Refreshing Services" msgstr "서비스를 새로 고치는 중" -#: src/lib/packager/clients/repositories.rb:1262 +#: src/lib/packager/clients/repositories.rb:1262 msgid "Refresh Repositories" msgstr "리포지토리 새로 고침" -#: src/lib/packager/clients/repositories.rb:1263 +#: src/lib/packager/clients/repositories.rb:1263 msgid "Refresh Services" msgstr "서비스 새로 고침" -#. progress bar label -#: src/lib/packager/clients/repositories.rb:1295 +#. progress bar label +#: src/lib/packager/clients/repositories.rb:1295 msgid "Refreshing Repository %1..." msgstr "%1 리포지토리를 새로 고치는 중..." -#. refreshing services -#. progress bar label -#: src/lib/packager/clients/repositories.rb:1321 +#. refreshing services +#. progress bar label +#: src/lib/packager/clients/repositories.rb:1321 msgid "Refreshing Service %1..." msgstr "서비스 %1을(를) 새로 고치는 중..." -#. popup question, %1 is repository URL -#: src/lib/packager/clients/repositories.rb:1463 +#. popup question, %1 is repository URL +#: src/lib/packager/clients/repositories.rb:1463 msgid "" "Repository %1\n" "has been already added. Each repository should be added only once.\n" @@ -1439,19 +1367,19 @@ "\n" "리포지토리를 다시 추가하시겠습니까?" -#. Error popup -#: src/lib/packager/clients/repositories.rb:1531 +#. Error popup +#: src/lib/packager/clients/repositories.rb:1531 msgid "<p>Errors occurred while restoring the repository configuration.</p>\n" msgstr "<p>리포지토리 구성을 복원하는 중 오류가 발생했습니다.</p>\n" -#. Handle the "Delete" button in the service view -#. @param [Integer] current index of the selected item in the table -#: src/lib/packager/clients/repositories.rb:1609 +#. Handle the "Delete" button in the service view +#. @param [Integer] current index of the selected item in the table +#: src/lib/packager/clients/repositories.rb:1609 msgid "The services of type 'plugin' cannot be removed." msgstr "이 '플러그인' 유형의 서비스는 제거할 수 없습니다." -#. yes-no popup -#: src/lib/packager/clients/repositories.rb:1615 +#. yes-no popup +#: src/lib/packager/clients/repositories.rb:1615 msgid "" "Delete service %1\n" "and its repositories?" @@ -1459,20 +1387,19 @@ "%1 서비스와 리포지토리를\n" "삭제하시겠습니까?" -#. Handle the "Delete" button in the repository view -#. @param [Integer] global_current index of the repository in the @sourceStatesOut -#: src/lib/packager/clients/repositories.rb:1635 -msgid "" -"The repositories belonging to a service of type 'plugin' cannot be removed." +#. Handle the "Delete" button in the repository view +#. @param [Integer] global_current index of the repository in the @sourceStatesOut +#: src/lib/packager/clients/repositories.rb:1635 +msgid "The repositories belonging to a service of type 'plugin' cannot be removed." msgstr "'플러그인' 유형의 서비스에 속하는 리포지토리는 제거할 수 없습니다." -#. yes-no popup -#: src/lib/packager/clients/repositories.rb:1639 +#. yes-no popup +#: src/lib/packager/clients/repositories.rb:1639 msgid "Delete the selected repository from the list?" msgstr "선택한 리포지토리를 목록에서 삭제하시겠습니까?" -#. popup message -#: src/lib/packager/clients/repositories.rb:1700 +#. popup message +#: src/lib/packager/clients/repositories.rb:1700 msgid "" "For the selected repository, refresh\n" "cannot be set." @@ -1480,8 +1407,8 @@ "선택한 리포지토리에 대해 새로 고침을\n" "설정할 수 없습니다." -#. refresh also the combobox widget -#: src/lib/packager/clients/repositories.rb:1982 +#. refresh also the combobox widget +#: src/lib/packager/clients/repositories.rb:1982 msgid "" "There is no service at URL:\n" "%1" @@ -1489,47 +1416,46 @@ "URL에 서비스가 없습니다.\n" "%1" -#. TRANSLATORS: An error message -#: src/lib/packager/clients/repositories.rb:2023 +#. TRANSLATORS: An error message +#: src/lib/packager/clients/repositories.rb:2023 msgid "The services of type 'plugin' cannot be changed." msgstr "'플러그인' 유형의 서비스는 변경할 수 없습니다." -#. TRANSLATORS: An error message -#: src/lib/packager/clients/repositories.rb:2030 -msgid "" -"The repositories belonging to a service of type 'plugin' cannot be changed." +#. TRANSLATORS: An error message +#: src/lib/packager/clients/repositories.rb:2030 +msgid "The repositories belonging to a service of type 'plugin' cannot be changed." msgstr "'플러그인' 유형의 서비스에 속하는 리포지토리는 변경할 수 없습니다." -#. this is a heading -#: src/lib/packager/clients/software_proposal.rb:115 +#. this is a heading +#: src/lib/packager/clients/software_proposal.rb:115 msgid "Software" msgstr "소프트웨어" -#. this is a menu entry -#: src/lib/packager/clients/software_proposal.rb:117 +#. this is a menu entry +#: src/lib/packager/clients/software_proposal.rb:117 msgid "&Software" msgstr "소프트웨어(&S)" -#. New add-on product might add also new agents. -#. Functions Rereads all available agents. -#. -#. @see bugzilla #239055, #245508 -#. error report -#. popup error -#. popup error -#: src/modules/AddOnProduct.rb:527 src/modules/AddOnProduct.rb:635 -#: src/modules/ProductLicense.rb:574 src/modules/ProductLicense.rb:767 +#. New add-on product might add also new agents. +#. Functions Rereads all available agents. +#. +#. @see bugzilla #239055, #245508 +#. error report +#. popup error +#. popup error +#: src/modules/AddOnProduct.rb:527 src/modules/AddOnProduct.rb:635 +#: src/modules/ProductLicense.rb:574 src/modules/ProductLicense.rb:767 msgid "An error occurred while preparing the installation system." msgstr "설치 시스템을 준비하는 동안 오류가 발생했습니다." -#. error report -#: src/modules/AddOnProduct.rb:670 +#. error report +#: src/modules/AddOnProduct.rb:670 msgid "Control file %1 not found on media." msgstr "%1 제어 파일을 미디어에서 찾을 수 없습니다." -#. FATE #305578: Add-On Product Requiring Registration -#. or check the content file -#: src/modules/AddOnProduct.rb:911 +#. FATE #305578: Add-On Product Requiring Registration +#. or check the content file +#: src/modules/AddOnProduct.rb:911 msgid "" "Package '%s' is not installed.\n" "The add-on product cannot be registered." @@ -1537,75 +1463,74 @@ "'%s' 패키지가 설치되지 않았습니다.\n" "추가 기능 제품을 등록할 수 없습니다." -#. FATE #302398: PATTERNS keyword in content file -#. adding the product to the list of products (BNC #269625) -#. no such products -#: src/modules/AddOnProduct.rb:1154 src/modules/AddOnProduct.rb:1748 -#: src/modules/AddOnProduct.rb:1754 src/modules/Packages.rb:461 +#. FATE #302398: PATTERNS keyword in content file +#. adding the product to the list of products (BNC #269625) +#. no such products +#: src/modules/AddOnProduct.rb:1154 src/modules/AddOnProduct.rb:1748 +#: src/modules/AddOnProduct.rb:1754 src/modules/Packages.rb:461 msgid "Unknown Product" msgstr "알 수 없는 제품" -#. push button -#: src/modules/AddOnProduct.rb:1163 +#. push button +#: src/modules/AddOnProduct.rb:1163 msgid "Re&lease Notes..." msgstr "릴리스 정보(&L)..." -#. TRANSLATORS: error report -#. TRANSLATORS: error report -#: src/modules/AddOnProduct.rb:1293 src/modules/AddOnProduct.rb:1454 +#. TRANSLATORS: error report +#. TRANSLATORS: error report +#: src/modules/AddOnProduct.rb:1293 src/modules/AddOnProduct.rb:1454 msgid "Unable to use additional products." msgstr "추가 제품을 사용할 수 없습니다." -#. fill up internal map (used later when item selected) -#: src/modules/AddOnProduct.rb:1344 src/modules/AddOnProduct.rb:1350 +#. fill up internal map (used later when item selected) +#: src/modules/AddOnProduct.rb:1344 src/modules/AddOnProduct.rb:1350 msgid "%1, URL: %2" msgstr "%1, URL: %2" -#: src/modules/AddOnProduct.rb:1360 +#: src/modules/AddOnProduct.rb:1360 msgid "URL: %1, Path: %2" msgstr "URL: %1, 경로: %2" -#. TRANSLATORS: popup heading -#: src/modules/AddOnProduct.rb:1389 +#. TRANSLATORS: popup heading +#: src/modules/AddOnProduct.rb:1389 msgid "Additional Products" msgstr "추가 제품" -#. TRANSLATORS: additional dialog information -#: src/modules/AddOnProduct.rb:1394 +#. TRANSLATORS: additional dialog information +#: src/modules/AddOnProduct.rb:1394 msgid "" -"The installation repository also contains the listed additional " -"repositories.\n" +"The installation repository also contains the listed additional repositories.\n" "Select the ones you want to use.\n" msgstr "" "설치 리포지토리에는 나열된 추가 리포지토리도 포함되어 있습니다.\n" "사용할 리포지토리를 선택하십시오.\n" -#: src/modules/AddOnProduct.rb:1405 +#: src/modules/AddOnProduct.rb:1405 msgid "Additional Products to Select" msgstr "선택할 추가 제품" -#. push button label -#: src/modules/AddOnProduct.rb:1412 +#. push button label +#: src/modules/AddOnProduct.rb:1412 msgid "Add Selected &Products" msgstr "선택한 제품 추가(&P)" -#. %1 is either "CD" or "DVD" -#: src/modules/AddOnProduct.rb:1544 +#. %1 is either "CD" or "DVD" +#: src/modules/AddOnProduct.rb:1544 msgid "Insert the addon %1 medium" msgstr "추가 기능 %1 미디어 삽입" -#. %1 is the product name, %2 is either "CD" or "DVD" -#: src/modules/AddOnProduct.rb:1549 +#. %1 is the product name, %2 is either "CD" or "DVD" +#: src/modules/AddOnProduct.rb:1549 msgid "Insert the %1 %2 medium" msgstr "%1 %2 미디어 삽입" -#. TRANSLATORS: error message, %1 is replaced with product URL -#: src/modules/AddOnProduct.rb:1596 +#. TRANSLATORS: error message, %1 is replaced with product URL +#: src/modules/AddOnProduct.rb:1596 msgid "Unable to add product %s." msgstr "제품 %s을(를) 추가할 수 없습니다." -#. update the trusted flag -#: src/modules/KeyManager.rb:214 +#. update the trusted flag +#: src/modules/KeyManager.rb:214 msgid "" "File '%1'\n" "does not contain a valid GPG key.\n" @@ -1613,8 +1538,8 @@ "'%1' 파일에는\n" "유효한 GPG 키가 포함되어 있지 않습니다.\n" -#. %1 is key ID (e.g. A84EDAE89C800ACA), %2 is key name (e.g. "SuSE Package Signing Key ") -#: src/modules/KeyManager.rb:235 +#. %1 is key ID (e.g. A84EDAE89C800ACA), %2 is key name (e.g. "SuSE Package Signing Key ") +#: src/modules/KeyManager.rb:235 msgid "" "Key '%1'\n" "'%2'\n" @@ -1624,336 +1549,304 @@ "'%2'\n" "은(는) 이미 알려져 있으므로, 다시 추가할 수 없습니다." -#. copy the key to the temporary directory (in fact the keys are imported in Write()) -#: src/modules/KeyManager.rb:279 +#. copy the key to the temporary directory (in fact the keys are imported in Write()) +#: src/modules/KeyManager.rb:279 msgid "Cannot copy the key to the temporary directory." msgstr "임시 디렉토리에 키를 복사할 수 없습니다." -#. button label -#: src/modules/PackageInstallation.rb:54 +#. button label +#: src/modules/PackageInstallation.rb:54 msgid "&Show Failed Packages List" msgstr "실패한 패키지 목록 표시(&S)" -#. button label -#: src/modules/PackageInstallation.rb:63 +#. button label +#: src/modules/PackageInstallation.rb:63 msgid "&Show Full Log" msgstr "전체 로그 표시(&S)" -#. dialog headline -#: src/modules/PackageInstallation.rb:75 +#. dialog headline +#: src/modules/PackageInstallation.rb:75 msgid "Installation of some Packages Failed" msgstr "일부 패키지 설치 실패" -#. collect and set installation summary data -#: src/modules/PackageInstallation.rb:208 +#. collect and set installation summary data +#: src/modules/PackageInstallation.rb:208 msgid "Installation aborted by user." msgstr "사용자가 설치를 중단했습니다." -#. the string is follwed by a media number, e.g. "Medium 1" -#: src/modules/PackageSlideShow.rb:51 +#. the string is follwed by a media number, e.g. "Medium 1" +#: src/modules/PackageSlideShow.rb:51 msgid "Medium %1" msgstr "미디어 %1" -#. Overflow (indicated by negative value) -#. When data throughput goes downhill (stalled network connection etc.), -#. cut off the predicted time at a reasonable maximum. -#. "%1" is a predefined maximum time. -#: src/modules/PackageSlideShow.rb:202 +#. Overflow (indicated by negative value) +#. When data throughput goes downhill (stalled network connection etc.), +#. cut off the predicted time at a reasonable maximum. +#. "%1" is a predefined maximum time. +#: src/modules/PackageSlideShow.rb:202 msgid ">%1" msgstr ">%1" -#. Nothing more to install from this CD (very concise - little space!!) -#. Nothing more to install from this CD (very concise - little space!!) -#: src/modules/PackageSlideShow.rb:220 src/modules/PackageSlideShow.rb:235 +#. Nothing more to install from this CD (very concise - little space!!) +#. Nothing more to install from this CD (very concise - little space!!) +#: src/modules/PackageSlideShow.rb:220 src/modules/PackageSlideShow.rb:235 msgid "Done." msgstr "완료." -#. Status line informing about the next CD that will be used -#. %1: Media type ("CD" / "DVD", ???) -#. %2: Media name ("SuSE Linux Professional CD 2" ) -#. %3: Time remaining until this media will be needed -#: src/modules/PackageSlideShow.rb:260 +#. Status line informing about the next CD that will be used +#. %1: Media type ("CD" / "DVD", ???) +#. %2: Media name ("SuSE Linux Professional CD 2" ) +#. %3: Time remaining until this media will be needed +#: src/modules/PackageSlideShow.rb:260 msgid "Next: %1 -- %2" msgstr "다음: %1 -- %2" -#. Status line informing about the next CD that will be used -#. %1: Media type ("CD" / "DVD", ???) -#. %2: Media name ("SuSE Linux Professional CD 2" ) -#: src/modules/PackageSlideShow.rb:277 +#. Status line informing about the next CD that will be used +#. %1: Media type ("CD" / "DVD", ???) +#. %2: Media name ("SuSE Linux Professional CD 2" ) +#: src/modules/PackageSlideShow.rb:277 msgid "Next: %1" msgstr "다음: %1" -#. Add "Total" item - at the top so it is visible by default even if there are many items -#. -#. List column header for total remaining MB and time to install -#: src/modules/PackageSlideShow.rb:922 +#. Add "Total" item - at the top so it is visible by default even if there are many items +#. +#. List column header for total remaining MB and time to install +#: src/modules/PackageSlideShow.rb:922 msgid "Total" msgstr "합계:" -#. do not show the average download rate if the space is limited -#. Update the current slide if applicable -#. -#. message in the installatino log, %1 is package name, -#. %2 is package size -#: src/modules/PackageSlideShow.rb:1049 src/modules/PackageSlideShow.rb:1301 -#: src/modules/PackageSlideShow.rb:1353 +#. do not show the average download rate if the space is limited +#. Update the current slide if applicable +#. +#. message in the installatino log, %1 is package name, +#. %2 is package size +#: src/modules/PackageSlideShow.rb:1049 src/modules/PackageSlideShow.rb:1301 +#: src/modules/PackageSlideShow.rb:1353 msgid "Downloading %1 (download size %2)" msgstr "%1 다운로드 중(다운로드 크기 %2)" -#: src/modules/PackageSlideShow.rb:1079 +#: src/modules/PackageSlideShow.rb:1079 msgid " (Remaining: %1%2 packages)" msgstr " (남음: %1%2 패키지)" -#. display download progress in DownloadInAdvance mode -#. translations: progress message (part1) -#: src/modules/PackageSlideShow.rb:1112 +#. display download progress in DownloadInAdvance mode +#. translations: progress message (part1) +#: src/modules/PackageSlideShow.rb:1112 msgid "Downloading Packages..." msgstr "패키지를 다운로드하는 중..." -#. progress message (part2) -#: src/modules/PackageSlideShow.rb:1115 +#. progress message (part2) +#: src/modules/PackageSlideShow.rb:1115 msgid " (Downloaded %1 of %2 packages)" msgstr " (%1 / %2개 패키지가 다운로드됨)" -#. Heading for the progress bar for the current package -#. while it is deleted. "%1" is the package name. -#: src/modules/PackageSlideShow.rb:1251 +#. Heading for the progress bar for the current package +#. while it is deleted. "%1" is the package name. +#: src/modules/PackageSlideShow.rb:1251 msgid "Deleting %1" msgstr "%1 삭제" -#. package installation - summary text -#. %1 is RPM name, %2 is installed (unpacked) size (e.g. 6.20MB) -#: src/modules/PackageSlideShow.rb:1258 +#. package installation - summary text +#. %1 is RPM name, %2 is installed (unpacked) size (e.g. 6.20MB) +#: src/modules/PackageSlideShow.rb:1258 msgid "Installing %1 (installed size %2)" msgstr "%1 설치 중(설치된 크기 %2)" -#. message in the installatino log, %1 is package name, -#. %2 is package size -#: src/modules/PackageSlideShow.rb:1336 +#. message in the installatino log, %1 is package name, +#. %2 is package size +#: src/modules/PackageSlideShow.rb:1336 msgid "Applying delta RPM: %1" msgstr "다음 델타 RPM 적용 중: %1" -#. warning text -#: src/modules/Packages.rb:301 -msgid "" -"Your computer is a 64-bit x86-64 system, but you are trying to install a 32-" -"bit distribution." +#. warning text +#: src/modules/Packages.rb:301 +msgid "Your computer is a 64-bit x86-64 system, but you are trying to install a 32-bit distribution." msgstr "컴퓨터가 64비트 x86-64 시스템인데 32비트 배포를 설치하려고 합니다." -#. help text for software proposal -#: src/modules/Packages.rb:317 -msgid "" -"<P>The pattern list states which functionality will be available after " -"installing the system.</P>" -msgstr "" -"<P>패턴 목록은 시스템 설치 후 사용할 수 있는 기능에 대해 명시합니다.</P>" +#. help text for software proposal +#: src/modules/Packages.rb:317 +msgid "<P>The pattern list states which functionality will be available after installing the system.</P>" +msgstr "<P>패턴 목록은 시스템 설치 후 사용할 수 있는 기능에 대해 명시합니다.</P>" -#. (see bnc#178357 why these numbers) -#. translators: help text for software proposal -#: src/modules/Packages.rb:329 -msgid "" -"<P>The proposal reports the total size of files which will be installed to " -"the system. However, the system will contain some other files (temporary and " -"working files) so the used space will be slightly larger than the proposed " -"value. Therefore it is a good idea to have at least 25% (or about 300MB) " -"free space before starting the installation.</P>" -msgstr "" -"<P>제안에서 시스템에 설치될 총 파일 크기를 보고합니다. 그러나 시스템에는 다" -"른 파일(임시 및 작업 파일)이 포함되므로 사용된 공간이 제안 값보다 약간 더 큽" -"니다. 따라서 설치를 시작하기 전에 사용 가능한 공간이 25%(또는 약 300MB) 이상 " -"있는지 확인하는 것이 좋습니다.</P>" +#. (see bnc#178357 why these numbers) +#. translators: help text for software proposal +#: src/modules/Packages.rb:329 +msgid "<P>The proposal reports the total size of files which will be installed to the system. However, the system will contain some other files (temporary and working files) so the used space will be slightly larger than the proposed value. Therefore it is a good idea to have at least 25% (or about 300MB) free space before starting the installation.</P>" +msgstr "<P>제안에서 시스템에 설치될 총 파일 크기를 보고합니다. 그러나 시스템에는 다른 파일(임시 및 작업 파일)이 포함되므로 사용된 공간이 제안 값보다 약간 더 큽니다. 따라서 설치를 시작하기 전에 사용 가능한 공간이 25%(또는 약 300MB) 이상 있는지 확인하는 것이 좋습니다.</P>" -#. help text for software proposal -#: src/modules/Packages.rb:334 +#. help text for software proposal +#: src/modules/Packages.rb:334 msgid "" "<P>The total 'size to download' is the size of the packages which will be\n" -"downloaded from remote (network) repositories. This value is important if " -"the connection is slow or if there is a data limit for downloading.</P>\n" +"downloaded from remote (network) repositories. This value is important if the connection is slow or if there is a data limit for downloading.</P>\n" msgstr "" "<P>총 '다운로드할 크기'는 원격(네트워크) 리포지토리에서 다운로드될\n" -"패키지 크기입니다. 이 값은 연결 속도가 느리거나 다운로드에 대한 데이터 한도" -"가 있는 경우에 중요합니다.</P>\n" +"패키지 크기입니다. 이 값은 연결 속도가 느리거나 다운로드에 대한 데이터 한도가 있는 경우에 중요합니다.</P>\n" -#. help text for software proposal - header -#: src/modules/Packages.rb:343 +#. help text for software proposal - header +#: src/modules/Packages.rb:343 msgid "<P><B>Software Proposal</B></P>" msgstr "<P><B>소프트웨어 제안</B></P>" -#. installation proposal - SW summary, %1 is name of the installed product -#. (e.g. openSUSE 10.3, SUSE Linux Enterprise ...) -#: src/modules/Packages.rb:360 +#. installation proposal - SW summary, %1 is name of the installed product +#. (e.g. openSUSE 10.3, SUSE Linux Enterprise ...) +#: src/modules/Packages.rb:360 msgid "Product: %1" msgstr "제품: %1" -#. installation proposal - SW summary, %1 is name of the selected desktop or system type (e.g. KDE) -#: src/modules/Packages.rb:374 +#. installation proposal - SW summary, %1 is name of the selected desktop or system type (e.g. KDE) +#: src/modules/Packages.rb:374 msgid "System Type: %1" msgstr "시스템 유형: %1" -#: src/modules/Packages.rb:385 +#: src/modules/Packages.rb:385 msgid "Patterns:<br>" msgstr "패턴:<br>" -#. installation proposal - SW summary, %1 is size of the selected packages (in MB or GB) -#: src/modules/Packages.rb:395 +#. installation proposal - SW summary, %1 is size of the selected packages (in MB or GB) +#: src/modules/Packages.rb:395 msgid "Size of Packages to Install: %1" msgstr "설치할 패키지 크기: %1" -#. installation proposal - SW summary, %1 is download size of the selected packages -#. which will be installed from an ftp or http repository (in MB or GB) -#: src/modules/Packages.rb:408 +#. installation proposal - SW summary, %1 is download size of the selected packages +#. which will be installed from an ftp or http repository (in MB or GB) +#: src/modules/Packages.rb:408 msgid "Downloading from Remote Repositories: %1" msgstr "원격 리포지토리에서 다운로드 중: %1" -#: src/modules/Packages.rb:470 +#: src/modules/Packages.rb:470 msgid "These add-on products have been marked for auto-removal: %1" msgstr "다음 추가 기능 제품이 자동 제거되도록 표시되었습니다. %1" -#. Warning message when some add-ons are marked to be removed automatically -#: src/modules/Packages.rb:494 -msgid "" -"Contact the vendors of these add-ons to provide you with new installation " -"media." -msgstr "" -"이러한 추가 기능의 제조업체에 새 설치 미디어를 제공하도록 요청하십시오." +#. Warning message when some add-ons are marked to be removed automatically +#: src/modules/Packages.rb:494 +msgid "Contact the vendors of these add-ons to provide you with new installation media." +msgstr "이러한 추가 기능의 제조업체에 새 설치 미디어를 제공하도록 요청하십시오." -#. Warning message when some add-ons are marked to be removed automatically -#: src/modules/Packages.rb:498 -msgid "" -"Contact the vendor of the add-on to provide you with a new installation " -"media." +#. Warning message when some add-ons are marked to be removed automatically +#: src/modules/Packages.rb:498 +msgid "Contact the vendor of the add-on to provide you with a new installation media." msgstr "추가 기능의 제조업체에 새 설치 미디어를 제공하도록 요청하십시오." -#. error message: %1: e.g. "/usr", %2: "/dev/sda2" -#: src/modules/Packages.rb:539 -msgid "" -"Error: Cannot check free space in basic directory %1 (device %2), cannot " -"start installation." -msgstr "" -"오류: 기본 디렉토리 %1(%2 장치)에서 사용 가능한 공간을 확인할 수 없습니다. 설" -"치를 시작할 수 없습니다." +#. error message: %1: e.g. "/usr", %2: "/dev/sda2" +#: src/modules/Packages.rb:539 +msgid "Error: Cannot check free space in basic directory %1 (device %2), cannot start installation." +msgstr "오류: 기본 디렉토리 %1(%2 장치)에서 사용 가능한 공간을 확인할 수 없습니다. 설치를 시작할 수 없습니다." -#. error message: %1: e.g. "/local", %2: "/dev/sda2" -#: src/modules/Packages.rb:559 +#. error message: %1: e.g. "/local", %2: "/dev/sda2" +#: src/modules/Packages.rb:559 msgid "Warning: Cannot check free space in directory %1 (device %2)." msgstr "경고: %1 디렉토리(%2 장치)에서 사용 가능한 공간을 확인할 수 없습니다." -#. summary warning -#: src/modules/Packages.rb:602 +#. summary warning +#: src/modules/Packages.rb:602 msgid "Not enough disk space." msgstr "디스크 공간이 부족합니다." -#. summary warning -#: src/modules/Packages.rb:604 +#. summary warning +#: src/modules/Packages.rb:604 msgid "Not enough disk space. Remove some packages in the single selection." msgstr "디스크 공간이 부족합니다. 패키지 몇 개를 한 번에 제거하십시오." -#. add a backslash if it's missing -#: src/modules/Packages.rb:625 +#. add a backslash if it's missing +#: src/modules/Packages.rb:625 msgid "Only %1 (%2%%) free space available on partition %3.<BR>" msgstr "%3 파티션에 사용 가능한 여유 공간이 %1(%2%%)만 있습니다.<BR>" -#. Check the YaST required packages. -#: src/modules/Packages.rb:645 +#. Check the YaST required packages. +#: src/modules/Packages.rb:645 msgid "Please manually select the needed items to install." msgstr "설치에 필요한 항목을 직접 선택하십시오." -#. newly installed products -#: src/modules/Packages.rb:707 +#. newly installed products +#: src/modules/Packages.rb:707 msgid "New product <b>%s</b> will be installed" msgstr "새 제품 <b>%s</b>을(를) 설치합니다." -#. product update: %s is a product name -#: src/modules/Packages.rb:717 +#. product update: %s is a product name +#: src/modules/Packages.rb:717 msgid "Product <b>%s</b> will be updated" msgstr "제품 <b>%s</b>을(를) 업데이트합니다." -#. product update: %{old_product} is an old product, %{new_product} is the new one -#: src/modules/Packages.rb:719 +#. product update: %{old_product} is an old product, %{new_product} is the new one +#: src/modules/Packages.rb:719 msgid "Product <b>%{old_product}</b> will be updated to <b>%{new_product}</b>" -msgstr "" -"제품 <b>%{old_product}</b>을(를) <b>%{new_product}</b>(으)로 업데이트합니다." +msgstr "제품 <b>%{old_product}</b>을(를) <b>%{new_product}</b>(으)로 업데이트합니다." -#: src/modules/Packages.rb:726 +#: src/modules/Packages.rb:726 msgid "Product <b>%s</b> will stay installed" msgstr "제품 <b>%s</b>을(를) 계속 설치합니다." -#. Removing another product might be an issue -#. (just warn if removed by user or by YaST) -#: src/modules/Packages.rb:736 +#. Removing another product might be an issue +#. (just warn if removed by user or by YaST) +#: src/modules/Packages.rb:736 msgid "<b>Warning:</b> Product <b>%s</b> will be removed." msgstr "<b>경고:</b> 제품 <b>%s</b>을(를) 제거합니다." -#: src/modules/Packages.rb:737 +#: src/modules/Packages.rb:737 msgid "<b>Error:</b> Product <b>%s</b> will be automatically removed." msgstr "<b>오류:</b> 제품 <b>%s</b>이(가) 자동으로 제거됩니다." -#. TRANSLATORS: update proposal warning, do NOT translate "-release", -#. it is part of a package name (like "sles-release") -#: src/modules/Packages.rb:763 +#. TRANSLATORS: update proposal warning, do NOT translate "-release", +#. it is part of a package name (like "sles-release") +#: src/modules/Packages.rb:763 msgid "" "<ul><li><b>Some products are marked for automatic removal.</b></li>\n" "<ul><li>Contact the vendor of the removed add-on to provide you with a new\n" -"installation media</li><li>Or select the appropriate online extension or " -"module\n" -"in the registration step</li><li>Or to continue with product upgrade go to " -"the\n" +"installation media</li><li>Or select the appropriate online extension or module\n" +"in the registration step</li><li>Or to continue with product upgrade go to the\n" "software selection and mark the product (the -release package) for removal.\n" "</li></ul></li></ul>" msgstr "" "<ul><li><b>일부 제품이 자동 제거 대상으로 표시됩니다.</b></li>\n" "<ul><li>제거되는 추가 기능의 벤더에 새 \n" -"설치 미디어를 요청하거나</li><li>등록 단계에서 적절한 온라인 확장 또는 모듈" -"을\n" +"설치 미디어를 요청하거나</li><li>등록 단계에서 적절한 온라인 확장 또는 모듈을\n" "선택하십시오.</li><li>또는 제품 업그레이드로 계속하려면\n" -"소프트웨어 선택으로 이동하여 제품(-릴리스 패키지)을 제거 대상으로 표시하십시" -"오.\n" +"소프트웨어 선택으로 이동하여 제품(-릴리스 패키지)을 제거 대상으로 표시하십시오.\n" "</li></ul></li></ul>" -#. error in proposal, %1 is URL -#: src/modules/Packages.rb:1227 +#. error in proposal, %1 is URL +#: src/modules/Packages.rb:1227 msgid "No repository found at '%1'." msgstr "'%1'에서 리포지토리를 찾을 수 없습니다." -#. TRANSLATORS: beginning of the rich text with the release notes -#: src/modules/Packages.rb:1500 +#. TRANSLATORS: beginning of the rich text with the release notes +#: src/modules/Packages.rb:1500 msgid "" -"<p><b>The release notes for the initial release are part of the " -"installation\n" +"<p><b>The release notes for the initial release are part of the installation\n" "media. If an Internet connection is available during configuration, you can\n" "download updated release notes from the SUSE Linux Web server.</b></p>\n" msgstr "" "<p><b>초기 릴리스에 대한 릴리스 정보는 설치 미디어에\n" "포함되어 있습니다. 구성 중 인터넷 연결을 사용할 수 있는 경우\n" -"SUSE Linux 웹 서버에서 업데이트된 릴리스 정보를 다운로드할 수 있습니다.</b>\n" +"SUSE Linux 웹 서버에서 업데이트된 릴리스 정보를 다운로드할 수 있습니다.</b></p>\n" -#. popup - information label -#: src/modules/Packages.rb:1527 +#. popup - information label +#: src/modules/Packages.rb:1527 msgid "Integrating booted media..." msgstr "부팅된 미디어 통합 중..." -#. close the popup in order to be able to ask about the license -#: src/modules/Packages.rb:1549 +#. close the popup in order to be able to ask about the license +#: src/modules/Packages.rb:1549 msgid "Failed to integrate the service pack repository." msgstr "서비스 팩 리포지토리를 통합하지 못했습니다." -#. popup - information label -#: src/modules/Packages.rb:1582 +#. popup - information label +#: src/modules/Packages.rb:1582 msgid "Initializing repositories..." msgstr "리포지토리 초기화 중..." -#. message popup, %1 is product name -#: src/modules/Packages.rb:1814 +#. message popup, %1 is product name +#: src/modules/Packages.rb:1814 msgid "Insert %1 CD 1" msgstr "%1 CD 1을 삽입하십시오." -#: src/modules/Packages.rb:1816 +#: src/modules/Packages.rb:1816 msgid "%1 CD 1 not found" msgstr "%1 CD 1을 찾을 수 없습니다." -#. an error message -#: src/modules/Packages.rb:1926 +#. an error message +#: src/modules/Packages.rb:1926 msgid "" "Error while initializing package descriptions.\n" "Check the log file %1 for more details." @@ -1961,8 +1854,8 @@ "패키지 설명 초기화 중 오류가 발생했습니다.\n" "자세한 내용은 %1 로그 파일에서 확인하십시오." -#. bnc #436925 -#: src/modules/Packages.rb:2198 +#. bnc #436925 +#: src/modules/Packages.rb:2198 msgid "" "The software selection has been changed externally.\n" "Software proposal will be called again." @@ -1970,13 +1863,13 @@ "소프트웨어 선택이 외부에서 변경되었습니다.\n" "소프트웨어 제안이 다시 호출됩니다." -#. popup label -#: src/modules/Packages.rb:2216 +#. popup label +#: src/modules/Packages.rb:2216 msgid "Evaluating package selection..." msgstr "패키지 선택을 분석하는 중..." -#. Error message, %{pattern_name} is replaced with the missing pattern name in runtime -#: src/modules/Packages.rb:2559 +#. Error message, %{pattern_name} is replaced with the missing pattern name in runtime +#: src/modules/Packages.rb:2559 msgid "" "Failed to select default product pattern %{pattern_name}.\n" "Pattern has not been found." @@ -1984,50 +1877,46 @@ "기본 제품 패턴 %{pattern_name}을(를) 선택하지 못했습니다.\n" "패턴을 찾을 수 없습니다." -#. TRANSLATORS: %s is a package list -#: src/modules/Packages.rb:2732 +#. TRANSLATORS: %s is a package list +#: src/modules/Packages.rb:2732 msgid "These packages need to be selected to install: %s" msgstr "설치를 위해 선택해야 하는 패키지: %s" -#. TRANSLATORS: %s is a pattern list -#: src/modules/Packages.rb:2735 +#. TRANSLATORS: %s is a pattern list +#: src/modules/Packages.rb:2735 msgid "These patterns need to be selected to install: %s" msgstr "설치를 위해 선택해야 하는 패턴: %s" -#. TRANSLATORS: %{type} is a resolvable type, %{list} is a list of names -#. This is a fallback message for unknown types, normally it should not be displayed -#: src/modules/Packages.rb:2739 +#. TRANSLATORS: %{type} is a resolvable type, %{list} is a list of names +#. This is a fallback message for unknown types, normally it should not be displayed +#: src/modules/Packages.rb:2739 msgid "These items (%{type}) need to be selected to install: %{list}" msgstr "설치를 위해 선택해야 하는 항목(%{type}): %{list}" -#. Sets that the license (file) has been already accepted -#. -#. @param [String] license_ident file name -#: src/modules/ProductLicense.rb:157 src/modules/ProductLicense.rb:164 +#. Sets that the license (file) has been already accepted +#. +#. @param [String] license_ident file name +#: src/modules/ProductLicense.rb:157 src/modules/ProductLicense.rb:164 msgid "Cannot read license file %1" msgstr "%1 라이센스 파일을 읽을 수 없음" -#: src/modules/ProductLicense.rb:158 -msgid "" -"To show the product license properly, put the license.tar.gz file to the " -"root of the live media when building the image." -msgstr "" -"제품 라이센스를 제대로 표시하려면 이미지를 작성할 때 license.tar.gz 파일을 라" -"이브 미디어의 루트에 넣으십시오." +#: src/modules/ProductLicense.rb:158 +msgid "To show the product license properly, put the license.tar.gz file to the root of the live media when building the image." +msgstr "제품 라이센스를 제대로 표시하려면 이미지를 작성할 때 license.tar.gz 파일을 라이브 미디어의 루트에 넣으십시오." -#. combo box -#: src/modules/ProductLicense.rb:302 +#. combo box +#: src/modules/ProductLicense.rb:302 msgid "&Language" msgstr "언어(&L)" -#. check box label -#: src/modules/ProductLicense.rb:391 +#. check box label +#: src/modules/ProductLicense.rb:391 msgid "I &Agree to the License Terms." msgstr "동의함(&A)" -#. TRANSLATORS: addition license information -#. %s is replaced with the directory name -#: src/modules/ProductLicense.rb:416 +#. TRANSLATORS: addition license information +#. %s is replaced with the directory name +#: src/modules/ProductLicense.rb:416 msgid "" "This EULA can be found in the directory\n" "%s" @@ -2035,9 +1924,9 @@ "이 EULA는 \n" "%s 디렉토리에 있습니다." -#. TRANSLATORS: addition license information -#. %s is replaced with the filename -#: src/modules/ProductLicense.rb:420 +#. TRANSLATORS: addition license information +#. %s is replaced with the filename +#: src/modules/ProductLicense.rb:420 msgid "" "If you want to print this EULA, you can find it\n" "on the first media in the file %s" @@ -2045,8 +1934,8 @@ "이 EULA를 인쇄할 경우 첫 번째 미디어의\n" "%s 파일에서 찾을 수 있습니다." -#. help text -#: src/modules/ProductLicense.rb:438 +#. help text +#: src/modules/ProductLicense.rb:438 msgid "" "<p>Read the license agreement carefully and select\n" "one of the available options. If you do not agree to the license agreement,\n" @@ -2056,23 +1945,23 @@ "하나를 선택하십시오. 사용권 계약에 동의하지 않으면 구성이\n" " 중단됩니다.</p>\n" -#. dialog title -#. #459391 -#. If a progress is running open another dialog -#. dialog caption -#: src/modules/ProductLicense.rb:448 src/modules/ProductLicense.rb:1197 -#: src/modules/ProductLicense.rb:1270 +#. dialog title +#. #459391 +#. If a progress is running open another dialog +#. dialog caption +#: src/modules/ProductLicense.rb:448 src/modules/ProductLicense.rb:1197 +#: src/modules/ProductLicense.rb:1270 msgid "License Agreement" msgstr "사용권 계약" -#. popup question -#: src/modules/ProductLicense.rb:1061 +#. popup question +#: src/modules/ProductLicense.rb:1061 msgid "Really abort the add-on product installation?" msgstr "추가 기능 제품 설치를 중단하시겠습니까?" -#. text changed due to bug #162499 -#. TRANSLATORS: text asking whether to refuse a license (Yes-No popup) -#: src/modules/ProductLicense.rb:1095 +#. text changed due to bug #162499 +#. TRANSLATORS: text asking whether to refuse a license (Yes-No popup) +#: src/modules/ProductLicense.rb:1095 msgid "" "Refusing the license agreement cancels the add-on\n" "product installation. Really refuse the agreement?" @@ -2080,19 +1969,19 @@ "사용권 계약을 거부하면 추가 기능 제품 설치가\n" "취소됩니다. 계약을 거부하시겠습니까?" -#. timed ok/cancel popup -#: src/modules/ProductLicense.rb:1107 +#. timed ok/cancel popup +#: src/modules/ProductLicense.rb:1107 msgid "The system is shutting down..." msgstr "시스템을 종료하는 중..." -#. TRANSLATORS: %s is an extension name -#. e.g. "SUSE Linux Enterprise Software Development Kit" -#: src/modules/ProductLicense.rb:1206 +#. TRANSLATORS: %s is an extension name +#. e.g. "SUSE Linux Enterprise Software Development Kit" +#: src/modules/ProductLicense.rb:1206 msgid "%s License Agreement" msgstr "%s 사용권 계약" -#. TRANSLATORS: %{license_url} is an URL where the displayed license can be found -#: src/modules/ProductLicense.rb:1622 +#. TRANSLATORS: %{license_url} is an URL where the displayed license can be found +#: src/modules/ProductLicense.rb:1622 msgid "" "If you want to print this EULA, you can download it from\n" "%{license_url}" @@ -2100,8 +1989,8 @@ "이 EULA를 인쇄하려면 \n" "%{license_url}에서 EULA를 다운로드할 수 있습니다." -#. popup yes-no -#: src/modules/SlideShowCallbacks.rb:59 +#. popup yes-no +#: src/modules/SlideShowCallbacks.rb:59 msgid "" "Do you really want\n" "to quit the installation?" @@ -2109,18 +1998,18 @@ "정말로 설치를\n" "종료하시겠습니까?" -#. Mode::update (), Stage::cont () -#: src/modules/SlideShowCallbacks.rb:71 +#. Mode::update (), Stage::cont () +#: src/modules/SlideShowCallbacks.rb:71 msgid "Aborted" msgstr "중단됨" -#. message in the installation log widget, %1 is a patch name which contains the script -#: src/modules/SlideShowCallbacks.rb:143 +#. message in the installation log widget, %1 is a patch name which contains the script +#: src/modules/SlideShowCallbacks.rb:143 msgid "Starting script %1" msgstr "%1 스크립트 시작" -#. label, %1 is patch name with version and architecture -#: src/modules/SlideShowCallbacks.rb:198 +#. label, %1 is patch name with version and architecture +#: src/modules/SlideShowCallbacks.rb:198 msgid "" "Patch %1\n" "\n" @@ -2128,8 +2017,8 @@ "패치 %1\n" "\n" -#. warning popup - %1 is directory name (e.g. /boot) -#: src/modules/SlideShowCallbacks.rb:333 +#. warning popup - %1 is directory name (e.g. /boot) +#: src/modules/SlideShowCallbacks.rb:333 msgid "" "The disk space in partition %1 is nearly exhausted.\n" "Continue with the installation?" @@ -2137,8 +2026,8 @@ "파티션 %1의 디스크 공간이 얼마 남지 않았습니다.\n" "설치를 계속하시겠습니까?" -#. yes-no popup -#: src/modules/SlideShowCallbacks.rb:367 +#. yes-no popup +#: src/modules/SlideShowCallbacks.rb:367 msgid "" "The disk space is nearly exhausted.\n" "Continue with the installation?" @@ -2146,104 +2035,104 @@ "디스크 공간이 얼마 남지 않았습니다.\n" "설치를 계속하시겠습니까?" -#. remote -#: src/modules/SlideShowCallbacks.rb:443 +#. remote +#: src/modules/SlideShowCallbacks.rb:443 msgid "Downloading delta RPM %1 (download size %2)" msgstr "%1 델타 RPM 다운로드 중(다운로드 크기 %2)" -#. error in installation log, %1 is detail error description -#: src/modules/SlideShowCallbacks.rb:472 +#. error in installation log, %1 is detail error description +#: src/modules/SlideShowCallbacks.rb:472 msgid "Failed to download delta RPM: %1" msgstr "다음 델타 RPM을 다운로드하지 못했습니다. %1" -#. error in installation log, %1 is detail error description -#: src/modules/SlideShowCallbacks.rb:481 +#. error in installation log, %1 is detail error description +#: src/modules/SlideShowCallbacks.rb:481 msgid "Failed to apply delta RPM: %1" msgstr "다음 델타 RPM을 적용하지 못했습니다. %1" -#. radio button -#: src/modules/SourceDialogs.rb:33 +#. radio button +#: src/modules/SourceDialogs.rb:33 msgid "&Scan Using SLP..." msgstr "SLP를 사용하여 스캔(&A)..." -#. radio button -#: src/modules/SourceDialogs.rb:35 +#. radio button +#: src/modules/SourceDialogs.rb:35 msgid "Commun&ity Repositories" msgstr "커뮤니티 리포지토리(&I)" -#. radio button -#: src/modules/SourceDialogs.rb:37 +#. radio button +#: src/modules/SourceDialogs.rb:37 msgid "&Extensions and Modules from Registration Server..." msgstr "등록 서버에서 확장 및 모듈(&E)..." -#. radio button -#: src/modules/SourceDialogs.rb:39 +#. radio button +#: src/modules/SourceDialogs.rb:39 msgid "Specify &URL..." msgstr "URL 지정(&U)..." -#. radio button -#: src/modules/SourceDialogs.rb:41 +#. radio button +#: src/modules/SourceDialogs.rb:41 msgid "&FTP..." msgstr "FTP(&F)..." -#. radio button -#: src/modules/SourceDialogs.rb:43 +#. radio button +#: src/modules/SourceDialogs.rb:43 msgid "&HTTP..." msgstr "HTTP(&H)..." -#. radio button -#: src/modules/SourceDialogs.rb:45 +#. radio button +#: src/modules/SourceDialogs.rb:45 msgid "HTT&PS..." msgstr "HTTPS(&P)..." -#. radio button -#. radio button -#: src/modules/SourceDialogs.rb:47 src/modules/SourceDialogs.rb:1776 +#. radio button +#. radio button +#: src/modules/SourceDialogs.rb:47 src/modules/SourceDialogs.rb:1776 msgid "S&MB/CIFS" msgstr "S&MB/CIFS" -#. radio button -#: src/modules/SourceDialogs.rb:49 +#. radio button +#: src/modules/SourceDialogs.rb:49 msgid "NF&S..." msgstr "NF&S..." -#. radio button -#: src/modules/SourceDialogs.rb:51 +#. radio button +#: src/modules/SourceDialogs.rb:51 msgid "&CD..." msgstr "CD(&C)..." -#. radio button -#: src/modules/SourceDialogs.rb:53 +#. radio button +#: src/modules/SourceDialogs.rb:53 msgid "&DVD..." msgstr "DVD(&D)..." -#. radio button -#: src/modules/SourceDialogs.rb:55 +#. radio button +#: src/modules/SourceDialogs.rb:55 msgid "&Hard Disk..." msgstr "하드 디스크(&H)..." -#. radio button -#: src/modules/SourceDialogs.rb:57 +#. radio button +#: src/modules/SourceDialogs.rb:57 msgid "&USB Mass Storage (USB Stick, Disk)..." msgstr "USB 대용량 저장소(USB 스틱, 디스크)..." -#. radio button -#: src/modules/SourceDialogs.rb:59 +#. radio button +#: src/modules/SourceDialogs.rb:59 msgid "&Local Directory..." msgstr "로컬 디렉토리(&L)..." -#. radio button -#: src/modules/SourceDialogs.rb:61 +#. radio button +#: src/modules/SourceDialogs.rb:61 msgid "&Local ISO Image..." msgstr "로컬 ISO 이미지(&L)..." -#. check box -#: src/modules/SourceDialogs.rb:63 +#. check box +#: src/modules/SourceDialogs.rb:63 msgid "&Download repository description files" msgstr "리포지토리 설명 파일 다운로드(&D)" -#. Help text suffix for some types of the media -#: src/modules/SourceDialogs.rb:120 +#. Help text suffix for some types of the media +#: src/modules/SourceDialogs.rb:120 msgid "" "<p>If the location is a file holding an ISO image\n" "of the media, set <b>ISO Image</b>.</p>" @@ -2251,8 +2140,8 @@ "<p>위치가 미디어의 ISO 이미지가 보관된\n" "파일이면 <b>ISO 이미지</b>를 설정합니다.</p>" -#. Help text suffix for some types of the media -#: src/modules/SourceDialogs.rb:125 +#. Help text suffix for some types of the media +#: src/modules/SourceDialogs.rb:125 msgid "" "<p>If the repository is on multiple media,\n" "set the location of the first media of the set.</p>\n" @@ -2260,151 +2149,146 @@ "<p>리포지토리가 여러 미디어에 있으면\n" "첫 번째 미디어 위치를 설정하십시오.</p>\n" -#. text entry -#: src/modules/SourceDialogs.rb:139 +#. text entry +#: src/modules/SourceDialogs.rb:139 msgid "&Server Name" msgstr "서버 이름(&S)" -#. text entry -#. text entry -#: src/modules/SourceDialogs.rb:147 src/modules/SourceDialogs.rb:1640 +#. text entry +#. text entry +#: src/modules/SourceDialogs.rb:147 src/modules/SourceDialogs.rb:1640 msgid "&Path to Directory or ISO Image" msgstr "디렉토리 또는 ISO 이미지 경로(&P)" -#. checkbox label -#: src/modules/SourceDialogs.rb:155 +#. checkbox label +#: src/modules/SourceDialogs.rb:155 msgid "&ISO Image" msgstr "ISO 이미지(&I)" -#. checkbox label -#: src/modules/SourceDialogs.rb:157 +#. checkbox label +#: src/modules/SourceDialogs.rb:157 msgid "N&FS v4 Protocol" msgstr "NFS v4 프로토콜(&F)" -#: src/modules/SourceDialogs.rb:163 +#: src/modules/SourceDialogs.rb:163 msgid "Mount Options" msgstr "마운트 옵션" -#. TRANSLATORS: "(default)" - is a combobox value and means default libzypp -#. NFS mount option (users can change it to anything else, the field is editable) -#: src/modules/SourceDialogs.rb:167 +#. TRANSLATORS: "(default)" - is a combobox value and means default libzypp +#. NFS mount option (users can change it to anything else, the field is editable) +#: src/modules/SourceDialogs.rb:167 msgid "(default)" msgstr "(기본값)" -#: src/modules/SourceDialogs.rb:178 +#: src/modules/SourceDialogs.rb:178 msgid "URL of the Repository" msgstr "리포지토리 URL" -#. frame -#: src/modules/SourceDialogs.rb:187 +#. frame +#: src/modules/SourceDialogs.rb:187 msgid "P&rotocol" msgstr "프로토콜(&R)" -#. input field label -#: src/modules/SourceDialogs.rb:197 +#. input field label +#: src/modules/SourceDialogs.rb:197 msgid "&URL of the Repository" msgstr "리포지토리의 URL(&U)" -#. label / dialog caption -#. bugzilla #219759 -#. service label can be empty (not defined) -#: src/modules/SourceDialogs.rb:212 src/modules/SourceManagerSLP.rb:323 +#. label / dialog caption +#. bugzilla #219759 +#. service label can be empty (not defined) +#: src/modules/SourceDialogs.rb:212 src/modules/SourceManagerSLP.rb:323 msgid "Repository URL" msgstr "리포지토리 URL" -#. label / dialog caption -#: src/modules/SourceDialogs.rb:214 +#. label / dialog caption +#: src/modules/SourceDialogs.rb:214 msgid "NFS Server" msgstr "NFS 서버" -#. label / dialog caption -#. label / dialog caption -#: src/modules/SourceDialogs.rb:216 src/modules/SourceDialogs.rb:218 +#. label / dialog caption +#. label / dialog caption +#: src/modules/SourceDialogs.rb:216 src/modules/SourceDialogs.rb:218 msgid "CD or DVD Media" msgstr "CD 또는 DVD 미디어" -#. label / dialog caption -#: src/modules/SourceDialogs.rb:220 +#. label / dialog caption +#: src/modules/SourceDialogs.rb:220 msgid "Hard Disk" msgstr "하드 디스크" -#. label / dialog caption -#: src/modules/SourceDialogs.rb:222 +#. label / dialog caption +#: src/modules/SourceDialogs.rb:222 msgid "USB Stick or Disk" msgstr "USB 스틱 또는 디스크" -#. label / dialog caption -#. dialog caption -#: src/modules/SourceDialogs.rb:224 src/modules/SourceDialogs.rb:945 +#. label / dialog caption +#. dialog caption +#: src/modules/SourceDialogs.rb:224 src/modules/SourceDialogs.rb:945 msgid "Local Directory" msgstr "로컬 디렉토리" -#. label / dialog caption -#: src/modules/SourceDialogs.rb:226 +#. label / dialog caption +#: src/modules/SourceDialogs.rb:226 msgid "Local ISO Image" msgstr "로컬 ISO 이미지" -#. label / dialog caption -#. label / dialog caption -#. label / dialog caption -#. label / dialog caption -#. label / dialog caption -#: src/modules/SourceDialogs.rb:228 src/modules/SourceDialogs.rb:230 -#: src/modules/SourceDialogs.rb:232 src/modules/SourceDialogs.rb:234 -#: src/modules/SourceDialogs.rb:236 +#. label / dialog caption +#. label / dialog caption +#. label / dialog caption +#. label / dialog caption +#. label / dialog caption +#: src/modules/SourceDialogs.rb:228 src/modules/SourceDialogs.rb:230 +#: src/modules/SourceDialogs.rb:232 src/modules/SourceDialogs.rb:234 +#: src/modules/SourceDialogs.rb:236 msgid "Server and Directory" msgstr "서버 디렉토리" -#. popup message -#: src/modules/SourceDialogs.rb:485 +#. popup message +#: src/modules/SourceDialogs.rb:485 msgid "The name of the repository cannot be empty." msgstr "리포지토리 이름은 비워둘 수 없습니다." -#. text entry -#: src/modules/SourceDialogs.rb:498 +#. text entry +#: src/modules/SourceDialogs.rb:498 msgid "&Repository Name" msgstr "리포지토리 이름(&R)" -#. help text -#: src/modules/SourceDialogs.rb:513 +#. help text +#: src/modules/SourceDialogs.rb:513 msgid "" "<p><big><b>Repository Name</b></big><br>\n" -"Use <b>Repository Name</b> to specify the name of the repository. If it is " -"empty, YaST will use the product name (if available) or the URL as the name." -"</p>\n" +"Use <b>Repository Name</b> to specify the name of the repository. If it is empty, YaST will use the product name (if available) or the URL as the name.</p>\n" msgstr "" "<p><big><b>리포지토리 이름</b></big><br>\n" -"<b>리포지토리 이름</b>을 사용하여 리포지토리의 이름을 지정합니다. 이름을 비워" -"두면 YaST는 제품 이름(사용 가능한 경우) 또는 URL을 이름으로 사용합니다.</p>\n" +"<b>리포지토리 이름</b>을 사용하여 리포지토리의 이름을 지정합니다. 이름을 비워두면 YaST는 제품 이름(사용 가능한 경우) 또는 URL을 이름으로 사용합니다.</p>\n" -#. text entry -#: src/modules/SourceDialogs.rb:527 +#. text entry +#: src/modules/SourceDialogs.rb:527 msgid "&Service Name" msgstr "서비스 이름(&S)" -#. help text -#: src/modules/SourceDialogs.rb:535 +#. help text +#: src/modules/SourceDialogs.rb:535 msgid "" "<p><big><b>Service Name</b></big><br>\n" -"Use <b>Service Name</b> to specify the name of the service. If it is empty, " -"YaST will use part of the service URL as the name.</p>\n" +"Use <b>Service Name</b> to specify the name of the service. If it is empty, YaST will use part of the service URL as the name.</p>\n" msgstr "" "<p><big><b>서비스 이름</b></big><br>\n" -"<b>서비스 이름</b>을 사용하여 서비스의 이름을 지정합니다. 이 항목이 비어 있" -"을 경우 서비스 URL의 일부를 이름으로 사용합니다.</p>\n" +"<b>서비스 이름</b>을 사용하여 서비스의 이름을 지정합니다. 이 항목이 비어 있을 경우 서비스 URL의 일부를 이름으로 사용합니다.</p>\n" -#. popup message -#: src/modules/SourceDialogs.rb:570 +#. popup message +#: src/modules/SourceDialogs.rb:570 msgid "URL cannot be empty." msgstr "URL을 비워 둘 수 없습니다." -#. text entry -#: src/modules/SourceDialogs.rb:584 +#. text entry +#: src/modules/SourceDialogs.rb:584 msgid "&URL" msgstr "URL(&U)" -#. help text -#: src/modules/SourceDialogs.rb:598 +#. help text +#: src/modules/SourceDialogs.rb:598 msgid "" "<p><big><b>Repository URL</b></big><br>\n" "Use <b>URL</b> to specify the URL of the repository.</p>" @@ -2412,20 +2296,20 @@ "<p><big><b>리포지토리 URL</b></big><br>\n" "<b>URL</b>을 사용하여 리포지토리 URL을 지정합니다.</p>" -#. Get widget description map -#. @return widget description map -#. Get widget description map -#. @return widget description map -#: src/modules/SourceDialogs.rb:771 src/modules/SourceDialogs.rb:1912 +#. Get widget description map +#. @return widget description map +#. Get widget description map +#. @return widget description map +#: src/modules/SourceDialogs.rb:771 src/modules/SourceDialogs.rb:1912 msgid "Edit Parts of the URL" msgstr "URL 부분 편집" -#: src/modules/SourceDialogs.rb:778 src/modules/SourceDialogs.rb:1919 +#: src/modules/SourceDialogs.rb:778 src/modules/SourceDialogs.rb:1919 msgid "Edit Complete URL" msgstr "전체 URL 편집" -#. help text -#: src/modules/SourceDialogs.rb:790 +#. help text +#: src/modules/SourceDialogs.rb:790 msgid "" "<p><big><b>NFS Server</b></big><br>\n" "Use <b>Server Name</b> and <b>Path to Directory or ISO Image</b>\n" @@ -2435,31 +2319,29 @@ "<b>서버 이름</b> 및 <b>디렉토리 또는 ISO 이미지 경로</b>를\n" "사용하여 NFS 서버 호스트 이름과 서버에서의 경로를 지정합니다.</p>" -#: src/modules/SourceDialogs.rb:797 +#: src/modules/SourceDialogs.rb:797 msgid "" "<p><big><b>Mount Options</b></big><br>\n" "You can specify extra options used for mounting the NFS volume.\n" -"This is an expert option, keeping the default value is recommened. See " -"<b>man 5 nfs</b>\n" +"This is an expert option, keeping the default value is recommened. See <b>man 5 nfs</b>\n" "for details and the list of supported options." msgstr "" "<p><big><b>마운트 옵션</b></big><br>\n" "NFS 볼륨 마운트에 사용되는 추가 옵션을 지정할 수 있습니다.\n" -"이것은 전문가 옵션으로, 기본값을 사용하는 것이 좋습니다. 자세한 내용 및 지원" -"되는 옵션 목록을 보려면 <b>man 5 nfs</b>를\n" +"이것은 전문가 옵션으로, 기본값을 사용하는 것이 좋습니다. 자세한 내용 및 지원되는 옵션 목록을 보려면 <b>man 5 nfs</b>를\n" "참조하십시오." -#. radio button -#: src/modules/SourceDialogs.rb:852 +#. radio button +#: src/modules/SourceDialogs.rb:852 msgid "&CD-ROM" msgstr "CD-ROM(&C)" -#. radio button -#: src/modules/SourceDialogs.rb:854 +#. radio button +#: src/modules/SourceDialogs.rb:854 msgid "&DVD-ROM" msgstr "DVD-ROM(&D)" -#: src/modules/SourceDialogs.rb:859 +#: src/modules/SourceDialogs.rb:859 msgid "" "<p><big><b>CD or DVD Media</b></big><br>\n" "Set <b>CD-ROM</b> or <b>DVD-ROM</b> to specify the type of media.</p>" @@ -2467,13 +2349,13 @@ "<p><big><b>CD 또는 DVD Media</b></big><br>\n" "미디어의 종류를 지정하려면 <b>CD-ROM</b>이나 <b>DVD-ROM</b>을 설정합니다.</p>" -#. dialog caption -#: src/modules/SourceDialogs.rb:960 +#. dialog caption +#: src/modules/SourceDialogs.rb:960 msgid "ISO Image File" msgstr "ISO 이미지 파일" -#. error popup - the entered path is not a directory -#: src/modules/SourceDialogs.rb:983 +#. error popup - the entered path is not a directory +#: src/modules/SourceDialogs.rb:983 msgid "" "The entered path is not a directory\n" "or the directory does not exist.\n" @@ -2481,8 +2363,8 @@ "입력한 경로가 디렉토리가 아니거나\n" "디렉토리가 없습니다.\n" -#. error popup - the entered path is not a regular file -#: src/modules/SourceDialogs.rb:1013 +#. error popup - the entered path is not a regular file +#: src/modules/SourceDialogs.rb:1013 msgid "" "The entered path is not a file\n" "or the file does not exist.\n" @@ -2490,8 +2372,8 @@ "입력한 경로가 파일이 아니거나\n" "파일이 없습니다.\n" -#. continue/cancel popup, %1 is a file name -#: src/modules/SourceDialogs.rb:1037 +#. continue/cancel popup, %1 is a file name +#: src/modules/SourceDialogs.rb:1037 msgid "" "File '%1'\n" "does not seem to be an ISO image.\n" @@ -2501,18 +2383,18 @@ "ISO 이미지가 아닌 것 같습니다.\n" "사용하시겠습니까?\n" -#. text entry -#: src/modules/SourceDialogs.rb:1058 +#. text entry +#: src/modules/SourceDialogs.rb:1058 msgid "&Path to Directory" msgstr "디렉토리 경로(&P)" -#. checkbox label -#: src/modules/SourceDialogs.rb:1066 src/modules/SourceDialogs.rb:1324 -#: src/modules/SourceDialogs.rb:1391 +#. checkbox label +#: src/modules/SourceDialogs.rb:1066 src/modules/SourceDialogs.rb:1324 +#: src/modules/SourceDialogs.rb:1391 msgid "&Plain RPM Directory" msgstr "일반 RPM 디렉토리(&P)" -#: src/modules/SourceDialogs.rb:1081 +#: src/modules/SourceDialogs.rb:1081 msgid "" "<p><big><b>Local Directory</b></big><br>\n" "Use <b>Path to Directory</b> to specify the path to the\n" @@ -2526,21 +2408,21 @@ "포함되어 있는 경우(즉, 제품 정보 없음)\n" "<b>일반 RPM 디렉토리</b> 옵션을 선택하십시오.</p>\n" -#. `opt(`hstretch), -#: src/modules/SourceDialogs.rb:1317 +#. `opt(`hstretch), +#: src/modules/SourceDialogs.rb:1317 msgid "&USB Mass Storage Device" msgstr "USB 대용량 저장 장치(&U)" -#. the spacing is added to make the widget wider -#: src/modules/SourceDialogs.rb:1322 src/modules/SourceDialogs.rb:1389 +#. the spacing is added to make the widget wider +#: src/modules/SourceDialogs.rb:1322 src/modules/SourceDialogs.rb:1389 msgid "&File System" msgstr "파일 시스템(&F)" -#: src/modules/SourceDialogs.rb:1323 src/modules/SourceDialogs.rb:1390 +#: src/modules/SourceDialogs.rb:1323 src/modules/SourceDialogs.rb:1390 msgid "Dire&ctory" msgstr "디렉토리(&C)" -#: src/modules/SourceDialogs.rb:1328 +#: src/modules/SourceDialogs.rb:1328 msgid "" "<p><big><b>USB Stick or Disk</b></big><br>\n" "Select the USB device on which the repository is located.\n" @@ -2558,9 +2440,9 @@ "포함되어 있는 경우(즉, 제품 정보 없음)\n" "<b>일반 RPM 디렉토리</b> 옵션을 선택하십시오.</p>\n" -#. 'auto' is a value in the combo box widget, do not translate it! -#. 'auto' is a value in the combo box widget, do not translate it! -#: src/modules/SourceDialogs.rb:1338 src/modules/SourceDialogs.rb:1405 +#. 'auto' is a value in the combo box widget, do not translate it! +#. 'auto' is a value in the combo box widget, do not translate it! +#: src/modules/SourceDialogs.rb:1338 src/modules/SourceDialogs.rb:1405 msgid "" "<p>The file system used on the device will be detected automatically\n" "if you select file system 'auto'. If the detection fails or you\n" @@ -2570,12 +2452,12 @@ "파일 시스템이 자동으로 검색됩니다. 검색에 실패하거나\n" "특정 파일 시스템을 사용하려는 경우 목록에서 선택하십시오.</p>\n" -#. combobox title -#: src/modules/SourceDialogs.rb:1388 +#. combobox title +#: src/modules/SourceDialogs.rb:1388 msgid "&Disk Device" msgstr "디스크 장치(&D)" -#: src/modules/SourceDialogs.rb:1395 +#: src/modules/SourceDialogs.rb:1395 msgid "" "<p><big><b>Disk</b></big><br>\n" "Select the disk on which the repository is located.\n" @@ -2593,13 +2475,13 @@ "포함되어 있는 경우(즉, 제품 정보 없음)\n" "<b>일반 RPM 디렉토리</b> 옵션을 선택하십시오.</p>\n" -#. text entry -#: src/modules/SourceDialogs.rb:1421 +#. text entry +#: src/modules/SourceDialogs.rb:1421 msgid "&Path to ISO Image" msgstr "ISO 이미지 경로(&P)" -#. push button -#: src/modules/SourceDialogs.rb:1441 +#. push button +#: src/modules/SourceDialogs.rb:1441 msgid "" "<p><big><b>Local ISO Image</b></big><br>\n" "Use <b>Path to ISO Image</b> to specify the path to the\n" @@ -2609,72 +2491,72 @@ "<b>ISO 이미지 경로</b>를 사용하여 ISO 이미지 파일의\n" "경로를 지정합니다.</p>" -#. text entry -#: src/modules/SourceDialogs.rb:1622 +#. text entry +#: src/modules/SourceDialogs.rb:1622 msgid "Server &Name" msgstr "서버 이름(&N)" -#: src/modules/SourceDialogs.rb:1626 +#: src/modules/SourceDialogs.rb:1626 msgid "&Port" msgstr "포트(&P)" -#. text entry -#: src/modules/SourceDialogs.rb:1631 +#. text entry +#: src/modules/SourceDialogs.rb:1631 msgid "&Share" msgstr "공유(&S)" -#. checkbox label -#: src/modules/SourceDialogs.rb:1644 +#. checkbox label +#: src/modules/SourceDialogs.rb:1644 msgid "ISO &Image" msgstr "ISO 이미지(&I)" -#. text entry -#: src/modules/SourceDialogs.rb:1647 +#. text entry +#: src/modules/SourceDialogs.rb:1647 msgid "&Directory on Server" msgstr "서버상의 디렉토리:(&D)" -#. frame -#: src/modules/SourceDialogs.rb:1652 +#. frame +#: src/modules/SourceDialogs.rb:1652 msgid "Au&thentication" msgstr "인증(&T)" -#. check box -#: src/modules/SourceDialogs.rb:1659 +#. check box +#: src/modules/SourceDialogs.rb:1659 msgid "&Anonymous" msgstr "익명(&A)" -#. text entry -#: src/modules/SourceDialogs.rb:1668 +#. text entry +#: src/modules/SourceDialogs.rb:1668 msgid "&Workgroup or Domain" msgstr "작업 그룹 또는 도메인(&W)" -#. text entry -#: src/modules/SourceDialogs.rb:1677 +#. text entry +#: src/modules/SourceDialogs.rb:1677 msgid "&User Name" msgstr "사용자 이름(&U)" -#. password entry -#: src/modules/SourceDialogs.rb:1684 +#. password entry +#: src/modules/SourceDialogs.rb:1684 msgid "&Password" msgstr "암호(&P)" -#. radio button -#: src/modules/SourceDialogs.rb:1759 +#. radio button +#: src/modules/SourceDialogs.rb:1759 msgid "&FTP" msgstr "FTP(&F)" -#. radio button -#: src/modules/SourceDialogs.rb:1762 +#. radio button +#: src/modules/SourceDialogs.rb:1762 msgid "H&TTP" msgstr "HTTP(&T)" -#. radio button -#: src/modules/SourceDialogs.rb:1769 +#. radio button +#: src/modules/SourceDialogs.rb:1769 msgid "HTT&PS" msgstr "HTTPS(&P)" -#. help text - server dialog -#: src/modules/SourceDialogs.rb:1943 +#. help text - server dialog +#: src/modules/SourceDialogs.rb:1943 msgid "" "<p><big><b>Server and Directory</b></big><br>\n" "Use <b>Server Name</b> and <b>Path to Directory or ISO Image</b>\n" @@ -2682,8 +2564,7 @@ "To enable authentication, uncheck <b>Anonymous</b> and specify the\n" "<b>User Name</b> and the <b>Password</b>.</p>\n" "<p>\n" -"For the SMB/CIFS repository, specify <b>Share</b> name and <b>Path to " -"Directory\n" +"For the SMB/CIFS repository, specify <b>Share</b> name and <b>Path to Directory\n" "or ISO Image</b>. \n" "If the location is a file holding an ISO image\n" "of the media, set <b>ISO Image</b>.</p>\n" @@ -2699,29 +2580,28 @@ "위치가 미디어의 ISO 이미지가 보관된\n" "파일이면 <b>ISO 이미지</b>를 설정하십시오.</p>\n" -#. help text - server dialog, there is a "Port" widget -#: src/modules/SourceDialogs.rb:1956 +#. help text - server dialog, there is a "Port" widget +#: src/modules/SourceDialogs.rb:1956 msgid "" -"<p>It is possible to set the <b>Port</b> number for a HTTP/HTTPS " -"repository.\n" +"<p>It is possible to set the <b>Port</b> number for a HTTP/HTTPS repository.\n" "Leave it empty to use the default port.</p>\n" msgstr "" "<p>HTTP/HTTPS 리포지토리에 대한 <b>포트</b> 번호를 설정할 수 있습니다.\n" "이 설정을 비워 두면 기본 포트를 사용합니다.</p>\n" -#. Returns whether Community Repositories are defined in the control file. -#. -#. @return [Boolean] whether defined -#: src/modules/SourceDialogs.rb:2018 +#. Returns whether Community Repositories are defined in the control file. +#. +#. @return [Boolean] whether defined +#: src/modules/SourceDialogs.rb:2018 msgid "I would li&ke to install an additional Add On Product" msgstr "추가 기능 제품을 더 설치하고 싶습니다(&K)." -#: src/modules/SourceDialogs.rb:2037 +#: src/modules/SourceDialogs.rb:2037 msgid "Net&work Configuration..." msgstr "네트워크 구성(&W)..." -#. help text -#: src/modules/SourceDialogs.rb:2153 +#. help text +#: src/modules/SourceDialogs.rb:2153 msgid "" "<p><big><b>Media Type</b></big><br>\n" "The software repository can be located on CD, on a network server,\n" @@ -2731,8 +2611,8 @@ "소프트웨어 리포지토리는 CD, 네트워크 서버 또는\n" "하드 디스크에 있을 수 있습니다.</p>" -#. help, continued -#: src/modules/SourceDialogs.rb:2162 +#. help, continued +#: src/modules/SourceDialogs.rb:2162 msgid "" "<p>\n" "To add <b>CD</b> or <b>DVD</b>,\n" @@ -2742,8 +2622,8 @@ "<b>CD</b>나 <b>DVD</b>를 추가하려면\n" " 사용 가능한 제품 CD 세트나 DVD가 필요합니다.</p>" -#. help, continued -#: src/modules/SourceDialogs.rb:2172 +#. help, continued +#: src/modules/SourceDialogs.rb:2172 msgid "" "<p>\n" "The product CDs can be copied to the hard disk.\n" @@ -2757,8 +2637,8 @@ "모든 CD가 동일한 디렉토리에 복사되는 경우에만\n" "기본 경로가 필요합니다.</p>\n" -#. help, continued -#: src/modules/SourceDialogs.rb:2184 +#. help, continued +#: src/modules/SourceDialogs.rb:2184 msgid "" "<p>\n" "Network installation requires a working network connection.\n" @@ -2770,208 +2650,206 @@ "첫 번째 CD의 패키지가 있는 디렉토리를\n" "지정하십시오(예: /data1/CD1).</p>\n" -#. error popup -#: src/modules/SourceDialogs.rb:2201 +#. error popup +#: src/modules/SourceDialogs.rb:2201 msgid "Select the media type" msgstr "미디어 유형 선택" -#: src/modules/SourceDialogs.rb:2207 +#: src/modules/SourceDialogs.rb:2207 msgid "Insert the add-on product CD" msgstr "추가 기능 제품 CD를 삽입하십시오." -#: src/modules/SourceDialogs.rb:2208 +#: src/modules/SourceDialogs.rb:2208 msgid "Insert the add-on product DVD" msgstr "추가 기능 제품 DVD를 삽입하십시오." -#. ask for a medium -#: src/modules/SourceDialogs.rb:2226 +#. ask for a medium +#: src/modules/SourceDialogs.rb:2226 msgid "No USB disk was detected." msgstr "검색된 USB 디스크가 없습니다." -#. use three slashes as third slash means path -#: src/modules/SourceDialogs.rb:2442 +#. use three slashes as third slash means path +#: src/modules/SourceDialogs.rb:2442 msgid "" "<p><b>Download Files</b><br>\n" "Each repository has description files which describe the content of the\n" -"repository. Check <b>Download repository description files</b> to download " -"the\n" +"repository. Check <b>Download repository description files</b> to download the\n" "files when closing this YaST module. If the option is unchecked, YaST will\n" "automatically download the files when it needs them later. </p>\n" msgstr "" "<p><b>파일 다운로드</b><br>\n" "각 리포지토리에는 리포지토리 내용을 설명하는 설명 파일이\n" "있습니다. 이 YaST 모듈을 닫을 때 파일을 다운로드하려면\n" -"<b>리포지토리 설명 파일 다운로드</b>를 선택하십시오. 옵션이 선택 취소된 경우 " -"YaST에서\n" +"<b>리포지토리 설명 파일 다운로드</b>를 선택하십시오. 옵션이 선택 취소된 경우 YaST에서\n" "나중에 필요할 때 파일을 자동으로 다운로드합니다. </p>\n" -#. dialog caption -#: src/modules/SourceDialogs.rb:2662 +#. dialog caption +#: src/modules/SourceDialogs.rb:2662 msgid "Media Type" msgstr "미디어 종류" -#. dialog caption -#: src/modules/SourceDialogs.rb:2686 +#. dialog caption +#: src/modules/SourceDialogs.rb:2686 msgid "Add On Product" msgstr "추가 기능 제품" -#. Returns boolean whether user confirmed to abort the configuration -#. -#. @return [Boolean] whether to abort -#: src/modules/SourceDialogs.rb:2717 +#. Returns boolean whether user confirmed to abort the configuration +#. +#. @return [Boolean] whether to abort +#: src/modules/SourceDialogs.rb:2717 msgid "URL scheme '%s' is not valid." msgstr "URL 구성표 '%s'이(가) 잘못되었습니다." -#. SourceManager read dialog caption -#: src/modules/SourceManager.rb:100 +#. SourceManager read dialog caption +#: src/modules/SourceManager.rb:100 msgid "Initializing Available Repositories" msgstr "사용 가능한 리포지토리 초기화 중" -#. Progress stage 1/3 -#: src/modules/SourceManager.rb:112 +#. Progress stage 1/3 +#: src/modules/SourceManager.rb:112 msgid "Read configured repositories" msgstr "구성된 리포지토리 읽기" -#. Progress stage 2/3 -#: src/modules/SourceManager.rb:114 +#. Progress stage 2/3 +#: src/modules/SourceManager.rb:114 msgid "Detect available repositories via SLP" msgstr "SLP를 통해 사용 가능한 리포지토리 검색" -#. Progress step 1/3 -#: src/modules/SourceManager.rb:118 +#. Progress step 1/3 +#: src/modules/SourceManager.rb:118 msgid "Reading configured repositories..." msgstr "구성된 리포지토리를 읽는 중..." -#. Progress step 2/3 -#: src/modules/SourceManager.rb:120 +#. Progress step 2/3 +#: src/modules/SourceManager.rb:120 msgid "Detecting available repositories..." msgstr "사용 가능한 리포지토리 검색 중..." -#. Progress finished -#. Progress finished -#: src/modules/SourceManager.rb:122 src/modules/SourceManager.rb:200 +#. Progress finished +#. Progress finished +#: src/modules/SourceManager.rb:122 src/modules/SourceManager.rb:200 msgid "Finished" msgstr "완료됨" -#. Error message -#: src/modules/SourceManager.rb:133 +#. Error message +#: src/modules/SourceManager.rb:133 msgid "Cannot read repositories." msgstr "리포지토리를 읽을 수 없습니다." -#. Error message -#: src/modules/SourceManager.rb:141 +#. Error message +#: src/modules/SourceManager.rb:141 msgid "Cannot detect available repositories." msgstr "사용 가능한 리포지토리를 검색할 수 없습니다." -#. popup message header -#: src/modules/SourceManager.rb:160 +#. popup message header +#: src/modules/SourceManager.rb:160 msgid "Unable to save changes to the repository.\n" msgstr "리포지토리의 변경사항을 저장할 수 없습니다.\n" -#. SourceManager read dialog caption -#: src/modules/SourceManager.rb:183 +#. SourceManager read dialog caption +#: src/modules/SourceManager.rb:183 msgid "Saving Repository Configuration" msgstr "리포지토리 구성 저장 중" -#. Progress stage 1/1 -#: src/modules/SourceManager.rb:194 +#. Progress stage 1/1 +#: src/modules/SourceManager.rb:194 msgid "Write repository settings" msgstr "리포지토리 설정 쓰기" -#. Progress step 1/1 -#: src/modules/SourceManager.rb:198 +#. Progress step 1/1 +#: src/modules/SourceManager.rb:198 msgid "Writing the settings..." msgstr "세팅을 기록하고 있습니다..." -#. Create a repository from an URL -#: src/modules/SourceManager.rb:296 +#. Create a repository from an URL +#: src/modules/SourceManager.rb:296 msgid "Adding repository..." msgstr "리포지토리 추가 중..." -#. status info, to be used inside summary -#: src/modules/SourceManager.rb:395 +#. status info, to be used inside summary +#: src/modules/SourceManager.rb:395 msgid "Disabled" msgstr "비활성화" -#. translators: name of a repository if no other idenfication found -#: src/modules/SourceManager.rb:407 +#. translators: name of a repository if no other idenfication found +#: src/modules/SourceManager.rb:407 msgid "unknown" msgstr "알수 없음`" -#. corresponds to the "Enable/Disable" button -#: src/modules/SourceManager.rb:430 +#. corresponds to the "Enable/Disable" button +#: src/modules/SourceManager.rb:430 msgid "On" msgstr "설정" -#. corresponds to the "Enable/Disable" button -#: src/modules/SourceManager.rb:432 +#. corresponds to the "Enable/Disable" button +#: src/modules/SourceManager.rb:432 msgid "Off" msgstr "해제" -#. summary header -#: src/modules/SourceManager.rb:472 +#. summary header +#: src/modules/SourceManager.rb:472 msgid "Configured Repositories" msgstr "구성된 리포지토리" -#. To adjust the width of the dialog, look for the more lengthy device label -#. (and add some extra space for the frame) -#: src/modules/SourceManager.rb:671 +#. To adjust the width of the dialog, look for the more lengthy device label +#. (and add some extra space for the frame) +#: src/modules/SourceManager.rb:671 msgid "&Drive to eject" msgstr "꺼낼 드라이브(&D)" -#. translators: popup heading (progress popup) -#: src/modules/SourceManagerSLP.rb:51 +#. translators: popup heading (progress popup) +#: src/modules/SourceManagerSLP.rb:51 msgid "SLP Search" msgstr "SLP 검색" -#. progress information -#. progress information -#: src/modules/SourceManagerSLP.rb:57 src/modules/SourceManagerSLP.rb:81 +#. progress information +#. progress information +#: src/modules/SourceManagerSLP.rb:57 src/modules/SourceManagerSLP.rb:81 msgid "Scanning network for installation services..." msgstr "설치 서비스에 대해 네트워크 검색하는 중..." -#. frame label -#: src/modules/SourceManagerSLP.rb:106 +#. frame label +#: src/modules/SourceManagerSLP.rb:106 msgid "Filter Form" msgstr "필터 형식" -#. translators: popup heading -#: src/modules/SourceManagerSLP.rb:158 +#. translators: popup heading +#: src/modules/SourceManagerSLP.rb:158 msgid "Choose SLP Repository" msgstr "SLP 리포지토리 선택" -#. tree label (tree of available products) -#: src/modules/SourceManagerSLP.rb:171 +#. tree label (tree of available products) +#: src/modules/SourceManagerSLP.rb:171 msgid "Available Installation &Products" msgstr "사용 가능한 설치 제품(&P)" -#: src/modules/SourceManagerSLP.rb:176 +#: src/modules/SourceManagerSLP.rb:176 msgid "&Details..." msgstr "자세히(&D)..." -#. error popup -#. message popup -#: src/modules/SourceManagerSLP.rb:211 src/modules/SourceManagerSLP.rb:217 +#. error popup +#. message popup +#: src/modules/SourceManagerSLP.rb:211 src/modules/SourceManagerSLP.rb:217 msgid "No details are available." msgstr "사용할 수 있는 세부 정보가 없습니다." -#. min Y in UI -#: src/modules/SourceManagerSLP.rb:274 +#. min Y in UI +#: src/modules/SourceManagerSLP.rb:274 msgid "Repository Details" msgstr "리포지토리 세부사항" -#. table header item -#: src/modules/SourceManagerSLP.rb:281 +#. table header item +#: src/modules/SourceManagerSLP.rb:281 msgid "Key" msgstr "키(&K)" -#. table header item -#: src/modules/SourceManagerSLP.rb:283 +#. table header item +#: src/modules/SourceManagerSLP.rb:283 msgid "Value" msgstr "값" -#. message popup -#: src/modules/SourceManagerSLP.rb:403 +#. message popup +#: src/modules/SourceManagerSLP.rb:403 msgid "" "Select one of the offered options.\n" "More repositories are available for this product.\n" @@ -2979,8 +2857,8 @@ "제공된 옵션 중 하나를 선택하십시오.\n" "이 제품에 대한 추가 리포지토리를 사용할 수 있습니다.\n" -#. popup error -#: src/modules/SourceManagerSLP.rb:423 +#. popup error +#: src/modules/SourceManagerSLP.rb:423 msgid "" "An internal error occurred.\n" "The selected repository has no URL." @@ -2988,13 +2866,13 @@ "내부 오류가 발생했습니다.\n" "선택한 리포지토리에 URL이 없습니다." -#. progress information, %1 stands for number of services -#: src/modules/SourceManagerSLP.rb:493 +#. progress information, %1 stands for number of services +#: src/modules/SourceManagerSLP.rb:493 msgid "Collecting information of %1 services found..." msgstr "발견된 %1 서비스의 정보 수집하는 중..." -#. error popup -#: src/modules/SourceManagerSLP.rb:591 +#. error popup +#: src/modules/SourceManagerSLP.rb:591 msgid "" "No SLP repositories have been found on your network.\n" "This could be caused by a running SuSEfirewall2,\n" @@ -3004,18 +2882,18 @@ "네트워크 검색을 방해하는 SuSEfirewall2가\n" "실행되고 있기 때문일 수 있습니다." -#. error popup -#: src/modules/SourceManagerSLP.rb:600 +#. error popup +#: src/modules/SourceManagerSLP.rb:600 msgid "No SLP repositories have been found on your network." msgstr "네트워크에서 SLP 리포지토리를 찾을 수 없습니다." -#. Warning message, e.g.: Partition /usr needs 35 MB more disk space -#: src/modules/SpaceCalculation.rb:870 +#. Warning message, e.g.: Partition /usr needs 35 MB more disk space +#: src/modules/SpaceCalculation.rb:870 msgid "Partition \"%1\" needs %2 more disk space." msgstr "\"%1\" 파티션에 %2 디스크 공간이 더 필요합니다." -#. popup message -#: src/modules/SpaceCalculation.rb:890 +#. popup message +#: src/modules/SpaceCalculation.rb:890 msgid "" "Deselect packages or delete data or temporary files\n" "before updating the system.\n" @@ -3023,7 +2901,7 @@ "시스템을 업데이트하기 전에 패키지를 선택 취소하거나 데이터 또는\n" "임시 파일을 삭제하십시오.\n" -#. popup message -#: src/modules/SpaceCalculation.rb:899 +#. popup message +#: src/modules/SpaceCalculation.rb:899 msgid "Deselect some packages." msgstr "일부 패키지를 선택 취소하십시오." Modified: branches/SLE12-SP3/yast/ko/po/pam.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/pam.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/pam.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,9 +14,9 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. popup text (%1 is user name, %2 is additional info, -#. like "Now LDAP was enabled") -#: src/modules/Autologin.rb:146 +#. popup text (%1 is user name, %2 is additional info, +#. like "Now LDAP was enabled") +#: src/modules/Autologin.rb:146 msgid "" "The automatic login feature is enabled for user %1.\n" "%2\n" Modified: branches/SLE12-SP3/yast/ko/po/pkg-bindings.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/pkg-bindings.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/pkg-bindings.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,191 +14,168 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#: src/GPGMap.cc:54 +#: src/GPGMap.cc:54 msgid "Never" msgstr "하지 않음" -#. help text -#: src/HelpTexts.h:36 -msgid "" -"<P><BIG><B>Loading Available Packages</B></BIG></P><P>Loading available " -"objects from the configured repositories is in progress. This may take a " -"while...</P>" -msgstr "" -"<P><BIG><B>사용 가능한 패키지 로드 중</B></BIG></P><P>구성된 리포지토리에서 " -"사용 가능한 객체 로드가 진행 중입니다. 시간이 조금 걸릴 수 있습니다.</P>" +#. help text +#: src/HelpTexts.h:36 +msgid "<P><BIG><B>Loading Available Packages</B></BIG></P><P>Loading available objects from the configured repositories is in progress. This may take a while...</P>" +msgstr "<P><BIG><B>사용 가능한 패키지 로드 중</B></BIG></P><P>구성된 리포지토리에서 사용 가능한 객체 로드가 진행 중입니다. 시간이 조금 걸릴 수 있습니다.</P>" -#. help text -#: src/HelpTexts.h:42 -msgid "" -"<P><BIG><B>Loading Installed Packages</B></BIG></P><P>The package manager is " -"reading installed packages...</P>" -msgstr "" -"<P><BIG><B>설치된 패키지 로드 중</B></BIG></P><P>패키지 관리자가 설치된 패키" -"지를 읽는 중입니다.</P>" +#. help text +#: src/HelpTexts.h:42 +msgid "<P><BIG><B>Loading Installed Packages</B></BIG></P><P>The package manager is reading installed packages...</P>" +msgstr "<P><BIG><B>설치된 패키지 로드 중</B></BIG></P><P>패키지 관리자가 설치된 패키지를 읽는 중입니다.</P>" -#. help text -#: src/HelpTexts.h:47 -msgid "" -"<P><BIG><B>Registering a New Repository</B></BIG></P><P>A new repository is " -"being registered. The package manager is reading the list of available " -"packages in the repository...</P>" -msgstr "" -"<P><BIG><B>새 리포지토리 등록 중</B></BIG></P><P>새 리포지토리를 등록하는 중" -"입니다. 패키지 관리자가 리포지토리에서 사용 가능한 패키지 목록을 읽고 있습니" -"다.</P>" +#. help text +#: src/HelpTexts.h:47 +msgid "<P><BIG><B>Registering a New Repository</B></BIG></P><P>A new repository is being registered. The package manager is reading the list of available packages in the repository...</P>" +msgstr "<P><BIG><B>새 리포지토리 등록 중</B></BIG></P><P>새 리포지토리를 등록하는 중입니다. 패키지 관리자가 리포지토리에서 사용 가능한 패키지 목록을 읽고 있습니다.</P>" -#: src/HelpTexts.h:52 -msgid "" -"<P><BIG><B>Saving Repositories</B></BIG></P><P>The package manager is " -"updating configured repositories...</P>" -msgstr "" -"<P><BIG><B>리포지토리 저장 중</B></BIG></P><P>패키지 관리자가 구성된 리포지토" -"리를 업데이트하는 중입니다.</P>" +#: src/HelpTexts.h:52 +msgid "<P><BIG><B>Saving Repositories</B></BIG></P><P>The package manager is updating configured repositories...</P>" +msgstr "<P><BIG><B>리포지토리 저장 중</B></BIG></P><P>패키지 관리자가 구성된 리포지토리를 업데이트하는 중입니다.</P>" -#: src/HelpTexts.h:55 -msgid "" -"<P><BIG><B>Refreshing the Repository</B></BIG></P><P>The package manager is " -"updating the repository content...</P>" -msgstr "" -"<P><BIG><B>리포지토리를 새로 고치는 중</B></BIG></P><P>패키지 관리자가 리포지" -"토리 내용을 업데이트하는 중입니다.</P>" +#: src/HelpTexts.h:55 +msgid "<P><BIG><B>Refreshing the Repository</B></BIG></P><P>The package manager is updating the repository content...</P>" +msgstr "<P><BIG><B>리포지토리를 새로 고치는 중</B></BIG></P><P>패키지 관리자가 리포지토리 내용을 업데이트하는 중입니다.</P>" -#. error message -#: src/Package.cc:658 +#. error message +#: src/Package.cc:658 msgid "The package cannot be selected to install." msgstr "설치할 패키지를 선택할 수 없습니다." -#. error message -#: src/Package.cc:664 +#. error message +#: src/Package.cc:664 msgid "The package is not available." msgstr "패키지를 사용할 수 없습니다." -#. still not initialized, throw an exception -#. translators: this is an error message -#: src/PkgFunctions.cc:129 +#. still not initialized, throw an exception +#. translators: this is an error message +#: src/PkgFunctions.cc:129 msgid "Cannot connect to the package manager" msgstr "패키지 관리자에 연결할 수 없습니다." -#: src/Source_Callbacks.cc:129 +#: src/Source_Callbacks.cc:129 msgid "Refreshing repository " msgstr "리포지토리를 새로 고치는 중" -#: src/Source_Callbacks.cc:150 +#: src/Source_Callbacks.cc:150 msgid "Probing repository " msgstr "리포지토리 검색 중" -#: src/Source_Create.cc:52 +#: src/Source_Create.cc:52 msgid "Scanning products in " msgstr "제품 검색 중" -#: src/Source_Create.cc:581 +#: src/Source_Create.cc:581 msgid "Search Available Products" msgstr "사용 가능한 제품 검색" -#: src/Source_Create.cc:586 +#: src/Source_Create.cc:586 msgid "Probe Source Type" msgstr "원본 유형 검색" -#: src/Source_Create.cc:589 +#: src/Source_Create.cc:589 msgid "Download Descriptions" msgstr "설명 다운로드" -#: src/Source_Create.cc:590 src/Source_Download.cc:407 src/Source_Load.cc:155 -#: src/Source_Load.cc:479 +#: src/Source_Create.cc:590 src/Source_Download.cc:407 src/Source_Load.cc:155 +#: src/Source_Load.cc:479 msgid "Rebuild Cache" msgstr "캐시 재작성" -#: src/Source_Create.cc:594 src/Source_Load.cc:156 src/Source_Load.cc:480 -#: src/Source_Set.cc:76 +#: src/Source_Create.cc:594 src/Source_Load.cc:156 src/Source_Load.cc:480 +#: src/Source_Set.cc:76 msgid "Load Data" msgstr "데이터 로드" -#: src/Source_Create.cc:597 +#: src/Source_Create.cc:597 msgid "Adding the Repository..." msgstr "리포지토리 추가 중..." -#: src/Source_Download.cc:56 src/Source_Download.cc:325 +#: src/Source_Download.cc:56 src/Source_Download.cc:325 msgid "Downloading " msgstr "다운로드 중" -#. stages: "download", "build cache" -#: src/Source_Download.cc:406 +#. stages: "download", "build cache" +#: src/Source_Download.cc:406 msgid "Refresh Metadata" msgstr "메타데이터 새로 고침" -#. 3 steps per repository (download, cache rebuild, load resolvables) -#: src/Source_Download.cc:414 +#. 3 steps per repository (download, cache rebuild, load resolvables) +#: src/Source_Download.cc:414 msgid "Refreshing Repository..." msgstr "리포지토리를 새로 고치는 중..." -#. error message (followed by directory name) -#: src/Source_Installation.cc:73 +#. error message (followed by directory name) +#: src/Source_Installation.cc:73 msgid "Target is not a directory: " msgstr "대상이 디렉토리가 아닙니다." -#. error message (followed by directory name) -#: src/Source_Installation.cc:103 +#. error message (followed by directory name) +#: src/Source_Installation.cc:103 msgid "Cannot create directory " msgstr "디렉토리를 생성할 수 없습니다." -#. error message (followed by directory name) -#: src/Source_Installation.cc:112 +#. error message (followed by directory name) +#: src/Source_Installation.cc:112 msgid "Cannot check status of directory " msgstr "디렉토리 상태를 확인할 수 없습니다." -#. error message (followed by detailed description) -#: src/Source_Installation.cc:190 src/Source_Installation.cc:216 +#. error message (followed by detailed description) +#: src/Source_Installation.cc:190 src/Source_Installation.cc:216 msgid "Error: Cannot copy the cache to the target directory\n" msgstr "오류: 캐시를 대상 디렉토리에 복사할 수 없습니다.\n" -#. error message -#: src/Source_Installation.cc:193 +#. error message +#: src/Source_Installation.cc:193 msgid "Copying failed" msgstr "복사 실패" -#. error message, service name and URL is appened at the end of the string -#: src/Source_Load.cc:109 +#. error message, service name and URL is appened at the end of the string +#: src/Source_Load.cc:109 msgid "Error refreshing service" msgstr "서비스 새로 고치기 오류" -#: src/Source_Load.cc:154 src/Source_Load.cc:478 +#: src/Source_Load.cc:154 src/Source_Load.cc:478 msgid "Refresh Sources" msgstr "원본 새로 고침" -#. 3 steps per repository (download, cache rebuild, load resolvables) -#: src/Source_Load.cc:161 src/Source_Load.cc:483 src/Source_Set.cc:83 -#: src/Target_Load.cc:74 src/Target_Load.cc:204 +#. 3 steps per repository (download, cache rebuild, load resolvables) +#: src/Source_Load.cc:161 src/Source_Load.cc:483 src/Source_Set.cc:83 +#: src/Target_Load.cc:74 src/Target_Load.cc:204 msgid "Loading the Package Manager..." msgstr "패키지 관리자 로드 중..." -#: src/Source_Load.cc:477 +#: src/Source_Load.cc:477 msgid "Load Sources" msgstr "원본 로드" -#. TODO: improve the error message -#: src/Source_Misc.cc:70 +#. TODO: improve the error message +#: src/Source_Misc.cc:70 msgid "Cannot find source" msgstr "원본을 찾을 수 없습니다." -#: src/Source_Save.cc:132 +#: src/Source_Save.cc:132 msgid "Remove Repositories" msgstr "리포지토리 제거" -#. stages: "download", "build cache" -#: src/Source_Save.cc:137 +#. stages: "download", "build cache" +#: src/Source_Save.cc:137 msgid "Save Repositories" msgstr "리포지토리 저장" -#. start the process -#: src/Source_Save.cc:145 +#. start the process +#: src/Source_Save.cc:145 msgid "Saving Repositories..." msgstr "리포지토리 저장 중..." -#: src/Target_Load.cc:70 +#: src/Target_Load.cc:70 msgid "Initialize the Target System" msgstr "대상 시스템 초기화" -#: src/Target_Load.cc:71 src/Target_Load.cc:200 +#: src/Target_Load.cc:71 src/Target_Load.cc:200 msgid "Read Installed Packages" msgstr "설치된 패키지 읽기" Modified: branches/SLE12-SP3/yast/ko/po/printer.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/printer.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/printer.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,80 +14,74 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the printer module -#: src/clients/printer.rb:54 +#. Command line help text for the printer module +#: src/clients/printer.rb:54 msgid "Configuration of printer" msgstr "프린터 구성" -#. Write the AutoYaST related printer settings to the system -#. according to the Printer::autoyast_printer_settings_import map -#. which was stored by a previous call of the Import function by AutoYaST -#. or reset to an empty map by a previous call of the Reset function. -#: src/clients/printer_auto.rb:244 +#. Write the AutoYaST related printer settings to the system +#. according to the Printer::autoyast_printer_settings_import map +#. which was stored by a previous call of the Import function by AutoYaST +#. or reset to an empty map by a previous call of the Reset function. +#: src/clients/printer_auto.rb:244 msgid "Error: Failed to write /etc/cups/cupsd.conf" msgstr "오류: /etc/cups/cupsd.conf에 쓰지 못했습니다." -#: src/clients/printer_auto.rb:263 +#: src/clients/printer_auto.rb:263 msgid "Error: Failed to write /etc/cups/client.conf" msgstr "오류: /etc/cups/client.conf에 쓰지 못했습니다." -#. which is added to its "Summary" text for AutoYaST -#. where %1 is replaced by the file name which cannot be read. -#: src/clients/printer_auto.rb:301 +#. which is added to its "Summary" text for AutoYaST +#. where %1 is replaced by the file name which cannot be read. +#: src/clients/printer_auto.rb:301 msgid "Warning: Cannot read %1 (file may not exist)." msgstr "경고: %1을(를) 읽을 수 없습니다(파일이 존재하지 않을 수 있음)." -#. which is added to its "Summary" text for AutoYaST -#. where %1 is replaced by the file name which cannot be read. -#: src/clients/printer_auto.rb:338 +#. which is added to its "Summary" text for AutoYaST +#. where %1 is replaced by the file name which cannot be read. +#: src/clients/printer_auto.rb:338 msgid "Error: Failed to read %1 (possibly empty file)." msgstr "오류: %1을(를) 읽지 못했습니다(빈 파일일 수 있음)." -#. which is added to its "Summary" text for AutoYaST -#. where %1 is replaced by the file name. -#: src/clients/printer_auto.rb:383 +#. which is added to its "Summary" text for AutoYaST +#. where %1 is replaced by the file name. +#: src/clients/printer_auto.rb:383 msgid "Warning: Failed to backup %1 as %1.yast2save" msgstr "경고: %1을(를) %1.yast2save로 백업하지 못했습니다." -#. which is added to its "Summary" text for AutoYaST -#. where %1 is replaced by the file name. -#: src/clients/printer_auto.rb:411 +#. which is added to its "Summary" text for AutoYaST +#. where %1 is replaced by the file name. +#: src/clients/printer_auto.rb:411 msgid "Warning: Failed to backup %1 as %1.yast2orig" msgstr "경고: %1을(를) %1.yast2orig로 백업하지 못했습니다." -#. Propose configuration for each local printer: -#. Check if the packages cups-client and cups are installed -#. and skip the automated queue setup if one of them is missing, see -#. https://bugzilla.novell.com/show_bug.cgi?id=445719#c13 -#. If cups-client is missing, it would run into an endless sequence of errors. -#. If cups is missing, there can be no local running cupsd which is -#. mandatory to set up local print queues. -#: src/clients/printer_proposal.rb:92 -msgid "" -"Cannot configure printing (required package cups-client is not installed)." -msgstr "" -"인쇄를 구성할 수 없습니다(필수 패키지 CUPS 클라이언트가 설치되지 않음)." +#. Propose configuration for each local printer: +#. Check if the packages cups-client and cups are installed +#. and skip the automated queue setup if one of them is missing, see +#. https://bugzilla.novell.com/show_bug.cgi?id=445719#c13 +#. If cups-client is missing, it would run into an endless sequence of errors. +#. If cups is missing, there can be no local running cupsd which is +#. mandatory to set up local print queues. +#: src/clients/printer_proposal.rb:92 +msgid "Cannot configure printing (required package cups-client is not installed)." +msgstr "인쇄를 구성할 수 없습니다(필수 패키지 CUPS 클라이언트가 설치되지 않음)." -#: src/clients/printer_proposal.rb:102 -msgid "" -"Cannot configure local printers (required package cups is not installed)." +#: src/clients/printer_proposal.rb:102 +msgid "Cannot configure local printers (required package cups is not installed)." msgstr "로컬 프린터를 구성할 수 없습니다(필수 패키지 CUPS가 설치되지 않음)." -#. Skip automated queue setup when it is a client-only config: -#: src/clients/printer_proposal.rb:117 -msgid "" -"No local printer accessible (using remote CUPS server '%1' for printing)." -msgstr "" -"로컬 프린터에 액세스할 수 없습니다(인쇄를 위해 원격 CUPS 서버 '%1'을(를) 사" -"용 중)." +#. Skip automated queue setup when it is a client-only config: +#: src/clients/printer_proposal.rb:117 +msgid "No local printer accessible (using remote CUPS server '%1' for printing)." +msgstr "로컬 프린터에 액세스할 수 없습니다(인쇄를 위해 원격 CUPS 서버 '%1'을(를) 사용 중)." -#. Wait half a minute for a new started cupsd: -#. Wait half a minute for a new started cupsd is necessary because -#. when a client-only config is switched to a "get Browsing info" config -#. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds -#. so that the local cupsd should listen at least 31 seconds to get Browsing info -#. before e.g. the Overview dialog can be shown with the right current queues. -#: src/clients/printer_proposal.rb:162 src/modules/Printerlib.rb:356 +#. Wait half a minute for a new started cupsd: +#. Wait half a minute for a new started cupsd is necessary because +#. when a client-only config is switched to a "get Browsing info" config +#. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds +#. so that the local cupsd should listen at least 31 seconds to get Browsing info +#. before e.g. the Overview dialog can be shown with the right current queues. +#: src/clients/printer_proposal.rb:162 src/modules/Printerlib.rb:356 msgid "" "Started the CUPS daemon.\n" "Waiting half a minute for the CUPS daemon to get ready to operate...\n" @@ -95,17 +89,17 @@ "CUPS 데몬을 시작했습니다.\n" "CUPS 데몬이 작동할 준비가 되도록 30분 동안 기다리는 중입니다.\n" -#. for the very first time (e.g. on a new installed system) -#. until the cupsd is actually ready to operate. -#. E.g. because parsing of thousands of PPDs may need much time. -#. Therefore enforce waiting one minute now. -#. (Plain busy message without title.) -#. for the very first time (e.g. on a new installed system) -#. until the cupsd is actually ready to operate. -#. E.g. because parsing of thousands of PPDs may need much time. -#. Therefore enforce waiting one minute now. -#. (Plain busy message without title.) -#: src/clients/printer_proposal.rb:176 src/modules/Printerlib.rb:372 +#. for the very first time (e.g. on a new installed system) +#. until the cupsd is actually ready to operate. +#. E.g. because parsing of thousands of PPDs may need much time. +#. Therefore enforce waiting one minute now. +#. (Plain busy message without title.) +#. for the very first time (e.g. on a new installed system) +#. until the cupsd is actually ready to operate. +#. E.g. because parsing of thousands of PPDs may need much time. +#. Therefore enforce waiting one minute now. +#. (Plain busy message without title.) +#: src/clients/printer_proposal.rb:176 src/modules/Printerlib.rb:372 msgid "" "The CUPS daemon is not yet accessible.\n" "Waiting one minute so that it is ready to operate..." @@ -113,623 +107,600 @@ "CUPS 데몬에 아직 액세스할 수 없습니다.\n" "작업 준비를 위해 1분 정도 기다려주십시오..." -#. Skip automated queue setup when the cupsd is not accessible up to now. -#. A special case is when the cupsd does not listen on the official IANA IPP port (631). -#. Then Printerlib::GetAndSetCupsdStatus("") returns false because it calls -#. "lpstat -h localhost -r" which fails ("-h localhost:port" would have to be used). -#. The YaST printer module does not support when the cupsd listens on a non-official port -#. so that also in this special case no automated queue setup is done. -#: src/clients/printer_proposal.rb:196 +#. Skip automated queue setup when the cupsd is not accessible up to now. +#. A special case is when the cupsd does not listen on the official IANA IPP port (631). +#. Then Printerlib::GetAndSetCupsdStatus("") returns false because it calls +#. "lpstat -h localhost -r" which fails ("-h localhost:port" would have to be used). +#. The YaST printer module does not support when the cupsd listens on a non-official port +#. so that also in this special case no automated queue setup is done. +#: src/clients/printer_proposal.rb:196 msgid "Cannot configure local printers (no local cupsd accessible)." msgstr "로컬 프린터를 구성할 수 없습니다(로컬 cupsd에 액세스할 수 없음)." -#. with an empty URI (i.e. no need to test this here) -#. but Printer::ConnectionItems adds trailing spaces -#. because the current YaST UI has almost no additional -#. space between table columns: -#: src/clients/printer_proposal.rb:223 +#. with an empty URI (i.e. no need to test this here) +#. but Printer::ConnectionItems adds trailing spaces +#. because the current YaST UI has almost no additional +#. space between table columns: +#: src/clients/printer_proposal.rb:223 msgid "No local printer detected." msgstr "로컬 프린터가 감지되지 않았습니다." -#. Since CUPS 1.4 the new DirtyCleanInterval directive controls -#. the delay when cupsd updates config files (see basicadd.ycp). -#. Since CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files: -#. Since CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files: -#: src/clients/printer_proposal.rb:340 src/include/printer/basicadd.rb:423 -#: src/include/printer/basicadd.rb:814 +#. Since CUPS 1.4 the new DirtyCleanInterval directive controls +#. the delay when cupsd updates config files (see basicadd.ycp). +#. Since CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files: +#. Since CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files: +#: src/clients/printer_proposal.rb:340 src/include/printer/basicadd.rb:423 +#: src/include/printer/basicadd.rb:814 msgid "Creating New Printer Setup" msgstr "새 프린터 설정 생성" -#: src/clients/printer_proposal.rb:343 src/include/printer/basicadd.rb:426 -#: src/include/printer/basicadd.rb:817 +#: src/clients/printer_proposal.rb:343 src/include/printer/basicadd.rb:426 +#: src/include/printer/basicadd.rb:817 msgid "New Printer Configuration not yet Stored in the System" msgstr "시스템에 새 프린터 구성이 아직 저장되지 않았음" -#. Explanation details of a Popup::ErrorDetails. -#: src/clients/printer_proposal.rb:347 +#. Explanation details of a Popup::ErrorDetails. +#: src/clients/printer_proposal.rb:347 msgid "This may result broken printer configurations." msgstr "잘못된 프린터 구성이 발생할 수 있습니다." -#. has almost no additional space between table columns: -#: src/clients/printer_proposal.rb:389 +#. has almost no additional space between table columns: +#: src/clients/printer_proposal.rb:389 msgid "Found existing configuration" msgstr "기존 구성이 있습니다." -#: src/clients/printer_proposal.rb:397 +#: src/clients/printer_proposal.rb:397 msgid "Created configuration" msgstr "구성을 생성했습니다." -#: src/clients/printer_proposal.rb:410 +#: src/clients/printer_proposal.rb:410 msgid "No local printer configured." msgstr "로컬 프린터가 구성되지 않았습니다." -#. Create titles: -#: src/clients/printer_proposal.rb:438 +#. Create titles: +#: src/clients/printer_proposal.rb:438 msgid "Printer" msgstr "프린터" -#. Menu title for Printer in proposals -#: src/clients/printer_proposal.rb:440 +#. Menu title for Printer in proposals +#: src/clients/printer_proposal.rb:440 msgid "&Printer" msgstr "프린터(&P)" -#. CheckBox to trigger an automatic configuration of local connected printers -#. by calling the YaST printer module autoconfig functionality right now. -#: src/include/printer/autoconfig.rb:49 +#. CheckBox to trigger an automatic configuration of local connected printers +#. by calling the YaST printer module autoconfig functionality right now. +#: src/include/printer/autoconfig.rb:49 msgid "&Do an automatic configuration of local connected printers now" msgstr "지금 로컬에 연결된 프린터 자동 구성 수행(&D)" -#. Header for a dialog section where the user can -#. specify if USB printers are configured automatically: -#: src/include/printer/autoconfig.rb:61 -msgid "" -"Specify if automatic USB printer configuration should happen when plug in" +#. Header for a dialog section where the user can +#. specify if USB printers are configured automatically: +#: src/include/printer/autoconfig.rb:61 +msgid "Specify if automatic USB printer configuration should happen when plug in" msgstr "연결 시 자동 USB 프린터 구성을 수행해야 하는지 여부 지정" -#. CheckBox for automatic configuration of USB printers -#. by installing or removing the RPM package udev-configure-printer. -#. Do not change or translate "udev-configure-printer", it is a RPM package name. -#: src/include/printer/autoconfig.rb:75 -msgid "" -"&Use the package udev-configure-printer for automatic USB printer " -"configuration" +#. CheckBox for automatic configuration of USB printers +#. by installing or removing the RPM package udev-configure-printer. +#. Do not change or translate "udev-configure-printer", it is a RPM package name. +#: src/include/printer/autoconfig.rb:75 +msgid "&Use the package udev-configure-printer for automatic USB printer configuration" msgstr "자동 USB 프린터 구성에 udev-configure-printer 패키지 사용(&U)" -#. where %1 will be replaced by the server name: -#. where %1 will be replaced by the server name: -#. where %1 will be replaced by the server name: -#. where %1 will be replaced by the server name: -#. where %1 will be replaced by the server name: -#: src/include/printer/autoconfig.rb:97 src/include/printer/overview.rb:1101 -#: src/include/printer/policies.rb:135 -#: src/include/printer/printingvianetwork.rb:463 -#: src/include/printer/sharing.rb:639 +#. where %1 will be replaced by the server name: +#. where %1 will be replaced by the server name: +#. where %1 will be replaced by the server name: +#. where %1 will be replaced by the server name: +#. where %1 will be replaced by the server name: +#: src/include/printer/autoconfig.rb:97 src/include/printer/overview.rb:1101 +#: src/include/printer/policies.rb:135 +#: src/include/printer/printingvianetwork.rb:463 +#: src/include/printer/sharing.rb:639 msgid "Disable Remote CUPS Server '%1'" msgstr "원격 CUPS 서버 '%1' 비활성화" -#. PopupYesNoHeadline headline -#. PopupYesNoHeadline body: -#: src/include/printer/autoconfig.rb:101 -msgid "" -"A remote CUPS server setting conflicts with automatic configuration of " -"printers for the local system." +#. PopupYesNoHeadline headline +#. PopupYesNoHeadline body: +#: src/include/printer/autoconfig.rb:101 +msgid "A remote CUPS server setting conflicts with automatic configuration of printers for the local system." msgstr "원격 CUPS 서버 설정이 로컬 시스템 프린터의 자동 구성과 충돌합니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Remove the 'ServerName' entry in /etc/cups/client.conf: -#: src/include/printer/autoconfig.rb:115 src/include/printer/overview.rb:220 -#: src/include/printer/overview.rb:1118 src/include/printer/policies.rb:153 -#: src/include/printer/printingvianetwork.rb:478 -#: src/include/printer/sharing.rb:657 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Remove the 'ServerName' entry in /etc/cups/client.conf: +#: src/include/printer/autoconfig.rb:115 src/include/printer/overview.rb:220 +#: src/include/printer/overview.rb:1118 src/include/printer/policies.rb:153 +#: src/include/printer/printingvianetwork.rb:478 +#: src/include/printer/sharing.rb:657 msgid "Failed to remove the 'ServerName' entry in /etc/cups/client.conf" msgstr "/etc/cups/client.conf에서 'ServerName' 항목을 제거하지 못했습니다." -#. There is no "abort" functionality which does a sudden death of the whole module (see dialogs.ycp). -#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage -#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" -#. so that this leftover "abort" button must be explicitly hidden here: -#: src/include/printer/autoconfig.rb:188 +#. There is no "abort" functionality which does a sudden death of the whole module (see dialogs.ycp). +#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage +#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" +#. so that this leftover "abort" button must be explicitly hidden here: +#: src/include/printer/autoconfig.rb:188 msgid "Failed to install udev-configure-printer." msgstr "udev-configure-printer를 설치하지 못했습니다." -#: src/include/printer/autoconfig.rb:201 +#: src/include/printer/autoconfig.rb:201 msgid "Failed to remove udev-configure-printer." msgstr "udev-configure-printer를 제거하지 못했습니다." -#. Call the YaST printer module autoconfig functionality: -#: src/include/printer/autoconfig.rb:247 +#. Call the YaST printer module autoconfig functionality: +#: src/include/printer/autoconfig.rb:247 msgid "The automated printer configuration was in vain." msgstr "자동 프린터 구성이 무효화되었습니다." -#: src/include/printer/autoconfig.rb:252 +#: src/include/printer/autoconfig.rb:252 msgid "Automated printer configuration results" msgstr "자동 프린터 구성 결과" -#. BasicAddDialog dialog -#. @return dialog result -#. BasicModifyDialog dialog -#. @return dialog result -#: src/include/printer/basicadd.rb:48 src/include/printer/basicmodify.rb:51 +#. BasicAddDialog dialog +#. @return dialog result +#. BasicModifyDialog dialog +#. @return dialog result +#: src/include/printer/basicadd.rb:48 src/include/printer/basicmodify.rb:51 msgid "any model" msgstr "모든 모델" -#. Caption for the "Add Printer" dialog (BasicAddDialog): -#: src/include/printer/basicadd.rb:51 +#. Caption for the "Add Printer" dialog (BasicAddDialog): +#: src/include/printer/basicadd.rb:51 msgid "Add New Printer Configuration" msgstr "새 프린터 구성 추가" -#. to avoid that the full list of thousands of PPDs is shown automatically -#. because it can take a very long time until the user can proceed: -#. to avoid that the full list of thousands of PPDs is shown automatically -#. because it can take a very long time until the user can proceed: -#. to avoid that the full list of thousands of PPDs is shown automatically -#. because it can take a very long time until the user can proceed: -#. to avoid that the full list of thousands of PPDs is shown automatically -#. because it can take a very long time until the user can proceed: -#: src/include/printer/basicadd.rb:81 src/include/printer/basicadd.rb:536 -#: src/include/printer/basicmodify.rb:330 -#: src/include/printer/basicmodify.rb:994 +#. to avoid that the full list of thousands of PPDs is shown automatically +#. because it can take a very long time until the user can proceed: +#. to avoid that the full list of thousands of PPDs is shown automatically +#. because it can take a very long time until the user can proceed: +#. to avoid that the full list of thousands of PPDs is shown automatically +#. because it can take a very long time until the user can proceed: +#. to avoid that the full list of thousands of PPDs is shown automatically +#. because it can take a very long time until the user can proceed: +#: src/include/printer/basicadd.rb:81 src/include/printer/basicadd.rb:536 +#: src/include/printer/basicmodify.rb:330 +#: src/include/printer/basicmodify.rb:994 msgid "Enter your printer model here." msgstr "프린터 모델을 입력하십시오." -#: src/include/printer/basicadd.rb:87 +#: src/include/printer/basicadd.rb:87 msgid "Specify the Connection" msgstr "연결 지정" -#. Label of a PushButton to restart printer autodetection -#. to show more available printer connections -#. in the Table with a list of printer connections: -#. Label of a PushButton to restart printer autodetection -#. to show more available printer connections -#. in the Table with a list of printer connections: -#: src/include/printer/basicadd.rb:94 src/include/printer/basicmodify.rb:343 +#. Label of a PushButton to restart printer autodetection +#. to show more available printer connections +#. in the Table with a list of printer connections: +#. Label of a PushButton to restart printer autodetection +#. to show more available printer connections +#. in the Table with a list of printer connections: +#: src/include/printer/basicadd.rb:94 src/include/printer/basicmodify.rb:343 msgid "&Detect More" msgstr "기타 검색(&D)" -#. Label of a PushButton to go to the "Connection Wizard" -#. to specify the printer connection individually: -#. Label of a PushButton to go to the "Connection Wizard" -#. to specify the printer connection individually: -#. Label of a PushButton to go to the "Connection Wizard" -#. to specify the printer connection individually: -#: src/include/printer/basicadd.rb:100 src/include/printer/basicmodify.rb:349 -#: src/include/printer/printingvianetwork.rb:195 +#. Label of a PushButton to go to the "Connection Wizard" +#. to specify the printer connection individually: +#. Label of a PushButton to go to the "Connection Wizard" +#. to specify the printer connection individually: +#. Label of a PushButton to go to the "Connection Wizard" +#. to specify the printer connection individually: +#: src/include/printer/basicadd.rb:100 src/include/printer/basicmodify.rb:349 +#: src/include/printer/printingvianetwork.rb:195 msgid "Connection &Wizard" msgstr "연결 마법사(&W)" -#. Printer model name: -#. Printer model name: -#. Printer model name: -#. Printer model name: -#. Printer model name: -#: src/include/printer/basicadd.rb:116 src/include/printer/basicadd.rb:456 -#: src/include/printer/basicmodify.rb:365 -#: src/include/printer/basicmodify.rb:893 -#: src/include/printer/connectionwizard.rb:545 +#. Printer model name: +#. Printer model name: +#. Printer model name: +#. Printer model name: +#. Printer model name: +#: src/include/printer/basicadd.rb:116 src/include/printer/basicadd.rb:456 +#: src/include/printer/basicmodify.rb:365 +#: src/include/printer/basicmodify.rb:893 +#: src/include/printer/connectionwizard.rb:545 msgid "Model" msgstr "모델" -#. Header of a Table column with a list of printer connections. -#. Connection of the printer (e.g. via USB or via parallel port): -#. Header of a Table column with a list of printer connections. -#. Connection of the printer (e.g. via USB or via parallel port): -#. Header of a Table column with a list of printer connections. -#. Connection of the printer (e.g. via USB or via parallel port): -#. Header of a Table column with a list of printer connections. -#. Connection of the printer (e.g. via USB or via parallel port): -#. Header of a Table column with a list of printer connections. -#. Connection of the printer (e.g. via USB or via parallel port): -#: src/include/printer/basicadd.rb:119 src/include/printer/basicadd.rb:459 -#: src/include/printer/basicmodify.rb:336 -#: src/include/printer/basicmodify.rb:368 -#: src/include/printer/basicmodify.rb:896 -#: src/include/printer/connectionwizard.rb:548 +#. Header of a Table column with a list of printer connections. +#. Connection of the printer (e.g. via USB or via parallel port): +#. Header of a Table column with a list of printer connections. +#. Connection of the printer (e.g. via USB or via parallel port): +#. Header of a Table column with a list of printer connections. +#. Connection of the printer (e.g. via USB or via parallel port): +#. Header of a Table column with a list of printer connections. +#. Connection of the printer (e.g. via USB or via parallel port): +#. Header of a Table column with a list of printer connections. +#. Connection of the printer (e.g. via USB or via parallel port): +#: src/include/printer/basicadd.rb:119 src/include/printer/basicadd.rb:459 +#: src/include/printer/basicmodify.rb:336 +#: src/include/printer/basicmodify.rb:368 +#: src/include/printer/basicmodify.rb:896 +#: src/include/printer/connectionwizard.rb:548 msgid "Connection" msgstr "연결" -#. Header of a Table column with a list of printer connections. -#. Additional description of the printer or its particular connection: -#. Header of a Table column with a list of printer connections. -#. Additional description of the printer or its particular connection: -#. Header of a Table column with a list of printer connections. -#. Additional description of the printer or its particular connection: -#. Header of a Table column with a list of printer connections. -#. Additional description of the printer or its particular connection: -#. Header of a Table column with a list of printer connections. -#. Additional description of the printer or its particular connection: -#. Header of a Table column with a list of print queues. -#. Print queue description (e.g. model or driver): -#: src/include/printer/basicadd.rb:122 src/include/printer/basicadd.rb:462 -#: src/include/printer/basicmodify.rb:371 -#: src/include/printer/basicmodify.rb:899 -#: src/include/printer/connectionwizard.rb:551 -#: src/include/printer/overview.rb:89 +#. Header of a Table column with a list of printer connections. +#. Additional description of the printer or its particular connection: +#. Header of a Table column with a list of printer connections. +#. Additional description of the printer or its particular connection: +#. Header of a Table column with a list of printer connections. +#. Additional description of the printer or its particular connection: +#. Header of a Table column with a list of printer connections. +#. Additional description of the printer or its particular connection: +#. Header of a Table column with a list of printer connections. +#. Additional description of the printer or its particular connection: +#. Header of a Table column with a list of print queues. +#. Print queue description (e.g. model or driver): +#: src/include/printer/basicadd.rb:122 src/include/printer/basicadd.rb:462 +#: src/include/printer/basicmodify.rb:371 +#: src/include/printer/basicmodify.rb:899 +#: src/include/printer/connectionwizard.rb:551 +#: src/include/printer/overview.rb:89 msgid "Description" msgstr "설명" -#. Header of a Table column with a list of printer connections. -#: src/include/printer/basicadd.rb:131 +#. Header of a Table column with a list of printer connections. +#: src/include/printer/basicadd.rb:131 msgid "Find and Assign a Driver" msgstr "드라이버 찾기 및 할당" -#. Label of a PushButton to search a list for a search string -#. and then show the search result: -#. Label of a PushButton to search a list for a search string -#. and then show the search result: -#. Label of a PushButton to search a list for a search string -#. and then show the search result: -#. Label of a PushButton to search a list for a search string -#. and then show the search result: -#: src/include/printer/basicadd.rb:147 src/include/printer/basicadd.rb:316 -#: src/include/printer/basicmodify.rb:407 -#: src/include/printer/basicmodify.rb:557 +#. Label of a PushButton to search a list for a search string +#. and then show the search result: +#. Label of a PushButton to search a list for a search string +#. and then show the search result: +#. Label of a PushButton to search a list for a search string +#. and then show the search result: +#. Label of a PushButton to search a list for a search string +#. and then show the search result: +#: src/include/printer/basicadd.rb:147 src/include/printer/basicadd.rb:316 +#: src/include/printer/basicmodify.rb:407 +#: src/include/printer/basicmodify.rb:557 msgid "&Search for" msgstr "검색 대상(&S)" -#. Label of a PushButton to find and show more available printer drivers: -#. Label of a PushButton to find and show more available printer drivers: -#: src/include/printer/basicadd.rb:168 src/include/printer/basicmodify.rb:428 +#. Label of a PushButton to find and show more available printer drivers: +#. Label of a PushButton to find and show more available printer drivers: +#: src/include/printer/basicadd.rb:168 src/include/printer/basicmodify.rb:428 msgid "&Find More" msgstr "기타 찾기(&F)" -#. Label of a PushButton to go to the "Add Driver" dialog -#. to install or remove driver packages (and perhaps download it before): -#. Label of a PushButton to go to the "Add Driver" dialog -#. to install or remove driver packages (and perhaps download it before): -#: src/include/printer/basicadd.rb:174 src/include/printer/basicmodify.rb:434 +#. Label of a PushButton to go to the "Add Driver" dialog +#. to install or remove driver packages (and perhaps download it before): +#. Label of a PushButton to go to the "Add Driver" dialog +#. to install or remove driver packages (and perhaps download it before): +#: src/include/printer/basicadd.rb:174 src/include/printer/basicmodify.rb:434 msgid "Driver &Packages" msgstr "드라이버 패키지(&P)" -#. By default there is no UserInput() -#. if only something was selected in the SelectionBox -#. (without clicking additionally a button) -#. but the notify option forces UserInput() in this case: -#. Body of a Popup::AnyMessage when no driver was selected: -#. Body of a Popup::AnyMessage when no driver was selected: -#. Body of a Popup::AnyMessage when no driver was selected: -#. because the first entry in a SelectionBox is always preselected in the GUI -#. (it does not help to have all items in a SelectionBox with 'false' as third argument). -#. Do not have this dummy entry preselected (i.e. no 'true' as a third argument) -#. because in the BasicModifyDialog the currently used driver is additionally prepended -#. and then the currently used driver must be preselected by default because -#. the currently used driver is then the very first entry in the SelectionBox. -#. because the first entry in a SelectionBox is always preselected in the GUI -#. (it does not help to have all items in a SelectionBox with 'false' as third argument). -#. Do not have this dummy entry preselected (i.e. no 'true' as a third argument) -#. because in the BasicModifyDialog the currently used driver is additionally prepended -#. and then the currently used driver must be preselected by default because -#. the currently used driver is then the very first entry in the SelectionBox. -#: src/include/printer/basicadd.rb:187 src/include/printer/basicadd.rb:356 -#: src/include/printer/basicadd.rb:588 -#: src/include/printer/basicmodify.rb:1082 - src/modules/Printer.rb:1954 -#: src/modules/Printer.rb:1980 +#. By default there is no UserInput() +#. if only something was selected in the SelectionBox +#. (without clicking additionally a button) +#. but the notify option forces UserInput() in this case: +#. Body of a Popup::AnyMessage when no driver was selected: +#. Body of a Popup::AnyMessage when no driver was selected: +#. Body of a Popup::AnyMessage when no driver was selected: +#. because the first entry in a SelectionBox is always preselected in the GUI +#. (it does not help to have all items in a SelectionBox with 'false' as third argument). +#. Do not have this dummy entry preselected (i.e. no 'true' as a third argument) +#. because in the BasicModifyDialog the currently used driver is additionally prepended +#. and then the currently used driver must be preselected by default because +#. the currently used driver is then the very first entry in the SelectionBox. +#. because the first entry in a SelectionBox is always preselected in the GUI +#. (it does not help to have all items in a SelectionBox with 'false' as third argument). +#. Do not have this dummy entry preselected (i.e. no 'true' as a third argument) +#. because in the BasicModifyDialog the currently used driver is additionally prepended +#. and then the currently used driver must be preselected by default because +#. the currently used driver is then the very first entry in the SelectionBox. +#: src/include/printer/basicadd.rb:187 src/include/printer/basicadd.rb:356 +#: src/include/printer/basicadd.rb:588 src/include/printer/basicmodify.rb:1082 +#: src/modules/Printer.rb:1954 src/modules/Printer.rb:1980 msgid "Select a driver." msgstr "드라이버를 선택합니다." -#. If the currently used driver is replaced by another driver, -#. show the same content as in the BasicAddDialog to set the default paper size: -#: src/include/printer/basicadd.rb:193 src/include/printer/basicmodify.rb:271 +#. If the currently used driver is replaced by another driver, +#. show the same content as in the BasicAddDialog to set the default paper size: +#: src/include/printer/basicadd.rb:193 src/include/printer/basicmodify.rb:271 msgid "Default paper size (if printer and driver supports it)" msgstr "기본 용지 크기(프린터와 드라이버에서 지원할 경우)" -#. Header of a TextEntry to enter the queue name: -#. Header of a TextEntry to enter the queue name: -#: src/include/printer/basicadd.rb:220 src/include/printer/basicadd.rb:574 +#. Header of a TextEntry to enter the queue name: +#. Header of a TextEntry to enter the queue name: +#: src/include/printer/basicadd.rb:220 src/include/printer/basicadd.rb:574 msgid "Set Arbitrary &Name" msgstr "임의 이름 설정(&N)" -#. CheckBox to set a local print queue to be the default queue: -#. CheckBox to set a local print queue to be the default queue: -#: src/include/printer/basicadd.rb:229 src/include/printer/basicmodify.rb:478 +#. CheckBox to set a local print queue to be the default queue: +#. CheckBox to set a local print queue to be the default queue: +#: src/include/printer/basicadd.rb:229 src/include/printer/basicmodify.rb:478 msgid "&Use as Default" msgstr "기본값으로 사용(&U)" -#. to set up HP printers: -#: src/include/printer/basicadd.rb:241 +#. to set up HP printers: +#: src/include/printer/basicadd.rb:241 msgid "Alternative setup for HP printers:" msgstr "HP 프린터에 대한 대체 설정:" -#. Label of a PushButton to run HPLIP's printer setup tool 'hp-setup'. -#. Do not change or translate "hp-setup", it is a program name: -#: src/include/printer/basicadd.rb:249 +#. Label of a PushButton to run HPLIP's printer setup tool 'hp-setup'. +#. Do not change or translate "hp-setup", it is a program name: +#: src/include/printer/basicadd.rb:249 msgid "Run &hp-setup" msgstr "hp-setup 실행(&H)" -#. printer setup tool 'hp-setup' runs in English language. -#. Do not change or translate "hp-setup", it is a program name: -#: src/include/printer/basicadd.rb:256 +#. printer setup tool 'hp-setup' runs in English language. +#. Do not change or translate "hp-setup", it is a program name: +#: src/include/printer/basicadd.rb:256 msgid "hp-setup runs in English language" msgstr "hp-setup은 영어로 실행됩니다." -#. nor a driver was selected: -#. Any queue or class can be tested if it is in "ready" state: -#. The URI scheme is the first word up to the ':' character in the URI: -#. Invalidate Printer::current_device_uri so that the Printer::ConnectionItems function -#. does not set a valid Printer::selected_connections_index so that the BasicAddDialog -#. does not preselect a connection so that the first connection in the list is preselected -#. (via Table widget fallback) which is still better than an arbitrary preselected entry: -#: src/include/printer/basicadd.rb:337 src/include/printer/overview.rb:593 -#: src/include/printer/overview.rb:679 src/include/printer/overview.rb:1153 +#. nor a driver was selected: +#. Any queue or class can be tested if it is in "ready" state: +#. The URI scheme is the first word up to the ':' character in the URI: +#. Invalidate Printer::current_device_uri so that the Printer::ConnectionItems function +#. does not set a valid Printer::selected_connections_index so that the BasicAddDialog +#. does not preselect a connection so that the first connection in the list is preselected +#. (via Table widget fallback) which is still better than an arbitrary preselected entry: +#: src/include/printer/basicadd.rb:337 src/include/printer/overview.rb:593 +#: src/include/printer/overview.rb:679 src/include/printer/overview.rb:1153 msgid "Nothing Selected" msgstr "아무 것도 선택하지 않았습니다." -#. Body of a Popup::AnyMessage when neither a connection -#. nor a driver was selected: -#: src/include/printer/basicadd.rb:340 +#. Body of a Popup::AnyMessage when neither a connection +#. nor a driver was selected: +#: src/include/printer/basicadd.rb:340 msgid "Select a connection and then assign a driver." msgstr "연결을 선택한 다음 드라이버를 할당하십시오." -#. exists in the connection_selection table because the Printer::ConnectionItems function -#. sets Printer::selected_connections_index != -1 only if such an item exists in the table -#. so that this item can be preselected: -#. exists in the connection_selection table because the Printer::ConnectionItems function -#. sets Printer::selected_connections_index != -1 only if such an item exists in the table -#. so that this item can be preselected: -#: src/include/printer/basicadd.rb:346 src/include/printer/basicadd.rb:496 -#: src/include/printer/basicmodify.rb:936 +#. exists in the connection_selection table because the Printer::ConnectionItems function +#. sets Printer::selected_connections_index != -1 only if such an item exists in the table +#. so that this item can be preselected: +#. exists in the connection_selection table because the Printer::ConnectionItems function +#. sets Printer::selected_connections_index != -1 only if such an item exists in the table +#. so that this item can be preselected: +#: src/include/printer/basicadd.rb:346 src/include/printer/basicadd.rb:496 +#: src/include/printer/basicmodify.rb:936 msgid "No Connection Selected" msgstr "선택된 연결 없음" -#. Body of a Popup::AnyMessage when no connection was selected: -#. Body of a Popup::AnyMessage when no connection was selected: -#. Body of a Popup::AnyMessage when no connection was selected: -#: src/include/printer/basicadd.rb:348 src/include/printer/basicadd.rb:498 -#: src/include/printer/basicmodify.rb:938 +#. Body of a Popup::AnyMessage when no connection was selected: +#. Body of a Popup::AnyMessage when no connection was selected: +#. Body of a Popup::AnyMessage when no connection was selected: +#: src/include/printer/basicadd.rb:348 src/include/printer/basicadd.rb:498 +#: src/include/printer/basicmodify.rb:938 msgid "Select a connection." msgstr "연결을 선택합니다." -#. the widgets to change options for the currently used driver are recreated: -#: src/include/printer/basicadd.rb:354 src/include/printer/basicadd.rb:586 -#: src/include/printer/basicmodify.rb:1080 +#. the widgets to change options for the currently used driver are recreated: +#: src/include/printer/basicadd.rb:354 src/include/printer/basicadd.rb:586 +#: src/include/printer/basicmodify.rb:1080 msgid "No Driver Selected" msgstr "드라이버를 선택하지 않았습니다." -#: src/include/printer/basicadd.rb:365 +#: src/include/printer/basicadd.rb:365 msgid "No Queue Name" msgstr "대기열 이름 없음" -#. Body of a Popup::AnyMessage when no queue name was entered: -#: src/include/printer/basicadd.rb:367 +#. Body of a Popup::AnyMessage when no queue name was entered: +#: src/include/printer/basicadd.rb:367 msgid "Enter a queue name." msgstr "대기열 이름을 입력합니다." -#: src/include/printer/basicadd.rb:377 +#: src/include/printer/basicadd.rb:377 msgid "Invalid Queue Name" msgstr "잘못된 대기열 이름" -#. Body of a Popup::AnyMessage when a wrong queue name was entered: -#: src/include/printer/basicadd.rb:379 -msgid "" -"Only letters (a-z and A-Z), numbers (0-9), and the underscore '_' are " -"allowed for the queue name." +#. Body of a Popup::AnyMessage when a wrong queue name was entered: +#: src/include/printer/basicadd.rb:379 +msgid "Only letters (a-z and A-Z), numbers (0-9), and the underscore '_' are allowed for the queue name." msgstr "대기열 이름에는 문자 [a-z 및 A-Z], 숫자 [0-9] 그리고 '_'만 허용됩니다." -#. when a queue name is changed to be valid: -#: src/include/printer/basicadd.rb:389 +#. when a queue name is changed to be valid: +#: src/include/printer/basicadd.rb:389 msgid "Confirm Validated Queue Name" msgstr "검증된 대기열 이름 확인" -#. Body of a Popup::ContinueCancelHeadline -#. when a queue name was automatically changed to be valid -#. where %1 will be replaced by the old invalid queue name -#. and %2 will be replaced by a new valid queue name -#: src/include/printer/basicadd.rb:395 +#. Body of a Popup::ContinueCancelHeadline +#. when a queue name was automatically changed to be valid +#. where %1 will be replaced by the old invalid queue name +#. and %2 will be replaced by a new valid queue name +#: src/include/printer/basicadd.rb:395 msgid "'%1' is invalid or it exists already. Use '%2' instead?" -msgstr "" -"'%1'이(가) 잘못되었거나 이미 있습니다. '%2'을(를) 대신 사용하시겠습니까?" +msgstr "'%1'이(가) 잘못되었거나 이미 있습니다. '%2'을(를) 대신 사용하시겠습니까?" -#. Explanation details of a Popup::ErrorDetails. -#. The 'next dialog' is the overview dialog where the printer configurations are shown -#. which has a 'Refresh List' button to update the shown printer configurations: -#. Explanation details of a Popup::ErrorDetails. -#. The 'next dialog' is the overview dialog where the printer configurations are shown -#. which has a 'Refresh List' button to update the shown printer configurations: -#: src/include/printer/basicadd.rb:430 src/include/printer/basicadd.rb:821 -msgid "" -"If the next dialog does not show the new printer configuration as expected, " -"wait some time and use the 'Refresh List' button." -msgstr "" -"어느 정도 기다려도 새 프린터 설정 대화 상자가 나오지 않으면 '목록 새로 고침' " -"버튼을 누르십시오." +#. Explanation details of a Popup::ErrorDetails. +#. The 'next dialog' is the overview dialog where the printer configurations are shown +#. which has a 'Refresh List' button to update the shown printer configurations: +#. Explanation details of a Popup::ErrorDetails. +#. The 'next dialog' is the overview dialog where the printer configurations are shown +#. which has a 'Refresh List' button to update the shown printer configurations: +#: src/include/printer/basicadd.rb:430 src/include/printer/basicadd.rb:821 +msgid "If the next dialog does not show the new printer configuration as expected, wait some time and use the 'Refresh List' button." +msgstr "어느 정도 기다려도 새 프린터 설정 대화 상자가 나오지 않으면 '목록 새로 고침' 버튼을 누르십시오." -#. Only a simple message because before the RunHpsetup function was called -#. and this function would have shown more specific messages. -#. Do not change or translate "hp-setup", it is a program name: -#: src/include/printer/basicadd.rb:802 +#. Only a simple message because before the RunHpsetup function was called +#. and this function would have shown more specific messages. +#. Do not change or translate "hp-setup", it is a program name: +#: src/include/printer/basicadd.rb:802 msgid "Failed to run hp-setup." msgstr "hp-setup을 실행하지 못했습니다." -#. Title of the Basic Modify Dialog where %1 will be replaced by the queue name. -#. The actual queue name is a system value which cannot be translated: -#: src/include/printer/basicmodify.rb:100 +#. Title of the Basic Modify Dialog where %1 will be replaced by the queue name. +#. The actual queue name is a system value which cannot be translated: +#: src/include/printer/basicmodify.rb:100 msgid "Modify %1" msgstr "%1 수정" -#. Label of a PushButton to go to a dialog -#. to set all available options for the printer driver -#. which is currently used for a print queue: -#: src/include/printer/basicmodify.rb:147 +#. Label of a PushButton to go to a dialog +#. to set all available options for the printer driver +#. which is currently used for a print queue: +#: src/include/printer/basicmodify.rb:147 msgid "All &Options for the Current Driver" msgstr "현재 드라이버에 대한 모든 옵션(&O)" -#. DefaultPageSize is required according to the Adobe PPD specification. -#. Nevertheless we don't rely on correct PPDs (e.g. whatever "third-party" PPDs) -#. and test if it really exists in the actually used PPD: -#: src/include/printer/basicmodify.rb:224 +#. DefaultPageSize is required according to the Adobe PPD specification. +#. Nevertheless we don't rely on correct PPDs (e.g. whatever "third-party" PPDs) +#. and test if it really exists in the actually used PPD: +#: src/include/printer/basicmodify.rb:224 msgid "Default Paper Size of the Current Driver" msgstr "현재 프린터의 기본 용지 크기" -#. Usually the id in the connection items is the matching index number in the connections list. -#. Here the id of the current connection is set to -1 because the uri of the current connection -#. is derived from the queues list and this uri may be not present in the connections list -#. for example when the queue has a special non-autodetectable DeviceURI (e.g. for iPrint) -#. or when the queue is for an USB printer which is currently not connected (e.g. a laptop user). -#. Therefore -1 (which means "invalid index number in the connections list") is used to be safe -#. and additionally -1 is used to distinguish when the current connection is kept -#. or when the connection was modified (then the id would be > 0 and valid in the connections list). -#. The current_connection item is preselected because it is the first entry in the -#. table of connections via prepend(): -#: src/include/printer/basicmodify.rb:298 +#. Usually the id in the connection items is the matching index number in the connections list. +#. Here the id of the current connection is set to -1 because the uri of the current connection +#. is derived from the queues list and this uri may be not present in the connections list +#. for example when the queue has a special non-autodetectable DeviceURI (e.g. for iPrint) +#. or when the queue is for an USB printer which is currently not connected (e.g. a laptop user). +#. Therefore -1 (which means "invalid index number in the connections list") is used to be safe +#. and additionally -1 is used to distinguish when the current connection is kept +#. or when the connection was modified (then the id would be > 0 and valid in the connections list). +#. The current_connection item is preselected because it is the first entry in the +#. table of connections via prepend(): +#: src/include/printer/basicmodify.rb:298 msgid "Current Connection" msgstr "현재 연결" -#. Do not change or translate "raw", it is a technical term when no driver is used. -#. Do not change or translate "System V style interface script", it is a technical term. -#: src/include/printer/basicmodify.rb:315 -msgid "" -"No driver is used (it is a 'raw' queue or a 'System V style interface " -"script' is used)" -msgstr "" -"사용되는 드라이버가 없습니다('원시' 대기열이거나 '시스템 V 유형 인터페이스 스" -"크립트'가 사용됨)." +#. Do not change or translate "raw", it is a technical term when no driver is used. +#. Do not change or translate "System V style interface script", it is a technical term. +#: src/include/printer/basicmodify.rb:315 +msgid "No driver is used (it is a 'raw' queue or a 'System V style interface script' is used)" +msgstr "사용되는 드라이버가 없습니다('원시' 대기열이거나 '시스템 V 유형 인터페이스 스크립트'가 사용됨)." -#: src/include/printer/basicmodify.rb:323 +#: src/include/printer/basicmodify.rb:323 msgid "Current Driver" msgstr "현재 드라이버" -#. Header of a Table column with a list of printer connections. -#: src/include/printer/basicmodify.rb:384 +#. Header of a Table column with a list of printer connections. +#: src/include/printer/basicmodify.rb:384 msgid "Adjust Options of the Current Driver or Assign a Different Driver" msgstr "현재 드라이버의 옵션 조정 또는 다른 드라이버 할당" -#. Label of a TextEntry for a short printer driver description (only one line): -#: src/include/printer/basicmodify.rb:461 +#. Label of a TextEntry for a short printer driver description (only one line): +#: src/include/printer/basicmodify.rb:461 msgid "Description &Text" msgstr "설명 텍스트(&T)" -#. Label of a TextEntry for printer location string: -#: src/include/printer/basicmodify.rb:469 +#. Label of a TextEntry for printer location string: +#: src/include/printer/basicmodify.rb:469 msgid "&Location" msgstr "위치(&L)" -#. CheckBox to set a local print queue to accept print jobs: -#: src/include/printer/basicmodify.rb:485 +#. CheckBox to set a local print queue to accept print jobs: +#: src/include/printer/basicmodify.rb:485 msgid "Accept Print &Jobs" msgstr "인쇄 작업 승인(&J)" -#. CheckBox to enable printing for a local print queue: -#: src/include/printer/basicmodify.rb:492 +#. CheckBox to enable printing for a local print queue: +#: src/include/printer/basicmodify.rb:492 msgid "&Enable Printing" msgstr "인쇄 활성화(&E)" -#. where %1 will be replaced by the queue name. -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/include/printer/basicmodify.rb:759 +#. where %1 will be replaced by the queue name. +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/include/printer/basicmodify.rb:759 msgid "Failed to modify %1." msgstr "%1을(를) 수정하지 못했습니다." -#. Since CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files: -#: src/include/printer/basicmodify.rb:816 +#. Since CUPS 1.4 the new DirtyCleanInterval directive controls the delay when cupsd updates config files: +#: src/include/printer/basicmodify.rb:816 msgid "Modifying Printer Setup" msgstr "프린터 설정 수정" -#: src/include/printer/basicmodify.rb:819 +#: src/include/printer/basicmodify.rb:819 msgid "Modified Printer Configuration not yet Stored in the System" msgstr "수정된 프린트 구성이 아직 시스템에 저장되지 않았음" -#. Explanation details of a Popup::WarningDetails. -#. The 'next dialog' is the overview dialog where the printer configurations are shown -#. which has a 'Refresh List' button to update the shown printer configurations: -#: src/include/printer/basicmodify.rb:823 -msgid "" -"If the next dialog does not show the expected modifications, wait some time " -"and use the 'Refresh List' button." -msgstr "" -"예상된 수정사항이 다음 대화 상자에 표시되지 않으면 잠시 기다린 다음 '목록 새" -"로 고침' 버튼을 누르십시오." +#. Explanation details of a Popup::WarningDetails. +#. The 'next dialog' is the overview dialog where the printer configurations are shown +#. which has a 'Refresh List' button to update the shown printer configurations: +#: src/include/printer/basicmodify.rb:823 +msgid "If the next dialog does not show the expected modifications, wait some time and use the 'Refresh List' button." +msgstr "예상된 수정사항이 다음 대화 상자에 표시되지 않으면 잠시 기다린 다음 '목록 새로 고침' 버튼을 누르십시오." -#. Exit this dialog in any case: -#. Return at least a list with only a fallback string so that the user is informed: -#. Have the PageSize option topmost: -#: src/include/printer/basicmodify.rb:853 src/modules/Printer.rb:2205 -#: src/modules/Printer.rb:2335 +#. Exit this dialog in any case: +#. Return at least a list with only a fallback string so that the user is informed: +#. Have the PageSize option topmost: +#: src/include/printer/basicmodify.rb:853 src/modules/Printer.rb:2205 +#: src/modules/Printer.rb:2335 msgid "No driver options available" msgstr "사용 가능한 드라이버 옵션 없음" -#. Body of a Popup::AnyMessage when "Driver Options" was selected: -#: src/include/printer/basicmodify.rb:855 +#. Body of a Popup::AnyMessage when "Driver Options" was selected: +#: src/include/printer/basicmodify.rb:855 msgid "Possible reasons: Nothing selected or it is a remote configuration." msgstr "가능한 이유: 아무 것도 선택하지 않았거나 원격 구성입니다." -#. Header for a ComboBox to keep the printer model or select another manufacturer: -#: src/include/printer/connectionwizard.rb:416 +#. Header for a ComboBox to keep the printer model or select another manufacturer: +#: src/include/printer/connectionwizard.rb:416 msgid "Keep the printer model or select another &manufacturer" msgstr "프린터 모델을 사용하거나 다른 제조업체 선택(&M)" -#. Header for a ComboBox to optionally -#. keep the printer model or select a printer manufacturer. -#. Do not change or translate "raw", it is a technical term -#. when no driver is used for a print queue. -#: src/include/printer/connectionwizard.rb:432 -msgid "" -"Keep the model or select a &manufacturer if no 'raw queue' should be set up" +#. Header for a ComboBox to optionally +#. keep the printer model or select a printer manufacturer. +#. Do not change or translate "raw", it is a technical term +#. when no driver is used for a print queue. +#: src/include/printer/connectionwizard.rb:432 +msgid "Keep the model or select a &manufacturer if no 'raw queue' should be set up" msgstr "모델 유지 또는 '원시 대기열'을 설정하면 안 되는 경우 제조업체 선택(&M)" -#. Header for a ComboBox to select the printer manufacturer: -#: src/include/printer/connectionwizard.rb:452 +#. Header for a ComboBox to select the printer manufacturer: +#: src/include/printer/connectionwizard.rb:452 msgid "Select the printer &manufacturer" msgstr "프린터 제조업체 선택(&M)" -#. Header for a ComboBox to optionally select the printer manufacturer. -#. Do not change or translate "raw", it is a technical term -#. when no driver is used for a print queue. -#: src/include/printer/connectionwizard.rb:467 +#. Header for a ComboBox to optionally select the printer manufacturer. +#. Do not change or translate "raw", it is a technical term +#. when no driver is used for a print queue. +#: src/include/printer/connectionwizard.rb:467 msgid "Select a printer &manufacturer if no 'raw queue' should be set up." msgstr "'원시 대기열'을 설정하면 안 되는 경우 프린터 제조업체 선택(&M)" -#. Header of a Table column with a list of printer connections. -#. TRANSLATORS: Text entry to fill IP or hostname of remote server -#: src/include/printer/connectionwizard.rb:560 -#: src/include/printer/connectionwizard.rb:1742 +#. Header of a Table column with a list of printer connections. +#. TRANSLATORS: Text entry to fill IP or hostname of remote server +#: src/include/printer/connectionwizard.rb:560 +#: src/include/printer/connectionwizard.rb:1742 msgid "&IP Address or Host Name" msgstr "IP 주소 또는 호스트 이름(&I)" -#. No URIpercentDecoding/Encondin(hostname) is done -#. when it contains a '@' because a lpd URI can be of the form -#. lpd://username@ip-address-or-hostname/... -#. and a ipp/http URI can be of the form -#. ipp://username:password@ip-address-or-hostname/... -#. http://username:password@ip-address-or-hostname/... -#. see https://bugzilla.novell.com/show_bug.cgi?id=512549 -#. TRANSLATORS: Text entry to fill IP or hostname of remote server -#: src/include/printer/connectionwizard.rb:569 -#: src/include/printer/connectionwizard.rb:1734 +#. No URIpercentDecoding/Encondin(hostname) is done +#. when it contains a '@' because a lpd URI can be of the form +#. lpd://username@ip-address-or-hostname/... +#. and a ipp/http URI can be of the form +#. ipp://username:password@ip-address-or-hostname/... +#. http://username:password@ip-address-or-hostname/... +#. see https://bugzilla.novell.com/show_bug.cgi?id=512549 +#. TRANSLATORS: Text entry to fill IP or hostname of remote server +#: src/include/printer/connectionwizard.rb:569 +#: src/include/printer/connectionwizard.rb:1734 msgid "&IP Address or Host Name [percent-encoded]" msgstr "IP 주소 또는 호스트 이름 [percent-encoded](&I)" -#: src/include/printer/connectionwizard.rb:576 -#: src/include/printer/connectionwizard.rb:1755 +#: src/include/printer/connectionwizard.rb:576 +#: src/include/printer/connectionwizard.rb:1755 msgid "Look up" msgstr "조회" -#. TRANSLATORS: Button to search for remote servers -#: src/include/printer/connectionwizard.rb:580 -#: src/include/printer/connectionwizard.rb:1759 +#. TRANSLATORS: Button to search for remote servers +#: src/include/printer/connectionwizard.rb:580 +#: src/include/printer/connectionwizard.rb:1759 msgid "Look up for All Hosts" msgstr "모든 호스트에 대해 조회" -#. TRANSLATORS: InputField for optional Device URI parameters: -#. TRANSLATORS: InputField for optional Device URI parameters: -#: src/include/printer/connectionwizard.rb:593 -#: src/include/printer/connectionwizard.rb:1774 +#. TRANSLATORS: InputField for optional Device URI parameters: +#. TRANSLATORS: InputField for optional Device URI parameters: +#: src/include/printer/connectionwizard.rb:593 +#: src/include/printer/connectionwizard.rb:1774 msgid "Optional 'option=value' parameter (usually empty) [percent-encoded]" msgstr "선택적 'option=value' 파라미터(일반적으로 비어 있음) [percent-encoded]" -#. TRANSLATORS: Button to test remote printer machine -#. TRANSLATORS: Button to test remote printer machine -#. TRANSLATORS: Button to test remote printer machine -#: src/include/printer/connectionwizard.rb:599 -#: src/include/printer/connectionwizard.rb:1596 -#: src/include/printer/connectionwizard.rb:1784 -#: src/include/printer/connectionwizard.rb:1899 +#. TRANSLATORS: Button to test remote printer machine +#. TRANSLATORS: Button to test remote printer machine +#. TRANSLATORS: Button to test remote printer machine +#: src/include/printer/connectionwizard.rb:599 +#: src/include/printer/connectionwizard.rb:1596 +#: src/include/printer/connectionwizard.rb:1784 +#: src/include/printer/connectionwizard.rb:1899 msgid "&Test Connection" msgstr "연결 테스트(&T)" -#. in the Connection Wizard but the RPM package hplip is not installed: -#: src/include/printer/connectionwizard.rb:639 +#. in the Connection Wizard but the RPM package hplip is not installed: +#: src/include/printer/connectionwizard.rb:639 msgid "" "To access a HP device via the 'hp' backend,\n" "the RPM package hplip must be installed." @@ -737,69 +708,66 @@ "'hp' 백엔드로 HP 장치에 액세스하려면\n" "hplip 패키지가 설치되어 있어야 합니다." -#: src/include/printer/connectionwizard.rb:644 +#: src/include/printer/connectionwizard.rb:644 msgid "The RPM package hplip is not installed." msgstr "hplip 패키지가 설치되지 않았습니다." -#. Label for an editable ComboBox where -#. a serial device node (e.g. /dev/ttyS0 or /dev/ttyS1) -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:993 +#. Label for an editable ComboBox where +#. a serial device node (e.g. /dev/ttyS0 or /dev/ttyS1) +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:993 msgid "&Serial device" msgstr "직렬 장치(&S)" -#. Label for an editable ComboBox where -#. the baud rate for a serial device -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:1007 +#. Label for an editable ComboBox where +#. the baud rate for a serial device +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:1007 msgid "&Baud rate" msgstr "전송 속도(&B)" -#. Label for an editable ComboBox where -#. the number of data bits for a serial device -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:1023 +#. Label for an editable ComboBox where +#. the number of data bits for a serial device +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:1023 msgid "&Data bits" msgstr "데이터 비트(&D)" -#. Label for an editable ComboBox where -#. the parity checking for a serial device -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:1037 +#. Label for an editable ComboBox where +#. the parity checking for a serial device +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:1037 msgid "&Parity checking" msgstr "패리티 확인(&P)" -#. Label for an editable ComboBox where -#. the flow control for a serial device -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:1053 +#. Label for an editable ComboBox where +#. the flow control for a serial device +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:1053 msgid "&Flow control" msgstr "흐름 제어(&F)" -#. Label for an editable ComboBox where -#. the number of stop bits for a serial device -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:1067 +#. Label for an editable ComboBox where +#. the number of stop bits for a serial device +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:1067 msgid "S&top bits" msgstr "비트 중지(&T)" -#: src/include/printer/connectionwizard.rb:1076 -msgid "" -"To access a bluetooth printer, the RPM package bluez-cups must be installed." -msgstr "" -"Bluetooth 프린터에 액세스하려면 bluez-cups 라는 RPM 패키지가 설치되어 있어야 " -"합니다." +#: src/include/printer/connectionwizard.rb:1076 +msgid "To access a bluetooth printer, the RPM package bluez-cups must be installed." +msgstr "Bluetooth 프린터에 액세스하려면 bluez-cups 라는 RPM 패키지가 설치되어 있어야 합니다." -#. The user can also decide during the actual installation not to install it -#. or the installation may have failed for whatever reason -#. so that we test again whether or not it is now actually installed: -#: src/include/printer/connectionwizard.rb:1092 +#. The user can also decide during the actual installation not to install it +#. or the installation may have failed for whatever reason +#. so that we test again whether or not it is now actually installed: +#: src/include/printer/connectionwizard.rb:1092 msgid "The RPM package bluez-cups is not installed." msgstr "bluez-cups 패키지가 설치되지 않았습니다." -#. Fallback message what the user may run manually when it fails -#. to generate a valid list of bluetooth device IDs: -#: src/include/printer/connectionwizard.rb:1098 +#. Fallback message what the user may run manually when it fails +#. to generate a valid list of bluetooth device IDs: +#: src/include/printer/connectionwizard.rb:1098 msgid "" "It seems there are no bluetooth device IDs.\n" "Run 'hcitool scan' to get the bluetooth device IDs.\n" @@ -809,339 +777,332 @@ "'hcitool scan'를 실행하여 Bluetooth 장치 ID를 확인하십시오.\n" "ID는 콜론 없이 '1A2B3C4D5E6F'와 같은 형태로 입력해야 합니다." -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/include/printer/connectionwizard.rb:1107 +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/include/printer/connectionwizard.rb:1107 msgid "Retrieving bluetooth device IDs..." msgstr "Bluetooth 장치 ID 가져오는 중..." -#. The command "hcitool scan" might need very much time or hang up. -#. To kill exactly hcitool there is the workaround via the temporary file because -#. hcitool scan | grep '...' & sleep 10 ; kill -9 $! -#. would kill only grep and -#. ( hcitool scan | grep '...' ) & sleep 10 ; kill -9 $! -#. would kill only the sub shell. -#: src/include/printer/connectionwizard.rb:1119 +#. The command "hcitool scan" might need very much time or hang up. +#. To kill exactly hcitool there is the workaround via the temporary file because +#. hcitool scan | grep '...' & sleep 10 ; kill -9 $! +#. would kill only grep and +#. ( hcitool scan | grep '...' ) & sleep 10 ; kill -9 $! +#. would kill only the sub shell. +#: src/include/printer/connectionwizard.rb:1119 msgid "Failed to get a list of bluetooth device IDs." msgstr "Bluetooth 장치 ID 목록을 확인하는 데 실패했습니다." -#. Label for an editable ComboBox where -#. a bluetooth device ID -#. can be selected or entered: -#: src/include/printer/connectionwizard.rb:1212 +#. Label for an editable ComboBox where +#. a bluetooth device ID +#. can be selected or entered: +#: src/include/printer/connectionwizard.rb:1212 msgid "&Bluetooth device ID" msgstr "&Bluetooth 장치 ID" -#: src/include/printer/connectionwizard.rb:1218 +#: src/include/printer/connectionwizard.rb:1218 msgid "Currently available bluetooth device IDs" msgstr "현재 사용 가능한 Bluetooth 장치 ID" -#. TRANSLATORS: List of input field labels, -#. first for network scan button, -#. second for the TCP port number: -#: src/include/printer/connectionwizard.rb:1268 +#. TRANSLATORS: List of input field labels, +#. first for network scan button, +#. second for the TCP port number: +#: src/include/printer/connectionwizard.rb:1268 msgid "Scan for Direct Socket Servers" msgstr "직접 소켓 서버 검색" -#: src/include/printer/connectionwizard.rb:1269 +#: src/include/printer/connectionwizard.rb:1269 msgid "TCP Port Number" msgstr "TCP 포트 번호" -#. TRANSLATORS: List of input field labels, -#. first for network scan button, -#. second for name of printer queue -#. TRANSLATORS: List of input field labels, -#. first for network scan button, -#. second for name of printer queue -#: src/include/printer/connectionwizard.rb:1326 -#: src/include/printer/connectionwizard.rb:1653 +#. TRANSLATORS: List of input field labels, +#. first for network scan button, +#. second for name of printer queue +#. TRANSLATORS: List of input field labels, +#. first for network scan button, +#. second for name of printer queue +#: src/include/printer/connectionwizard.rb:1326 +#: src/include/printer/connectionwizard.rb:1653 msgid "Scan for LPD Servers" msgstr "LPD 서버 검색" -#: src/include/printer/connectionwizard.rb:1327 +#: src/include/printer/connectionwizard.rb:1327 msgid "Queue Name (see the printer's manual)" msgstr "대기열 이름(프린터 설명서 참조)" -#. TRANSLATORS: Input field label -#: src/include/printer/connectionwizard.rb:1393 +#. TRANSLATORS: Input field label +#: src/include/printer/connectionwizard.rb:1393 msgid "URI (see the printer's manual) [percent-encoded]" msgstr "URI(프린터 매뉴얼 참조) [percent-encoded]" -#: src/include/printer/connectionwizard.rb:1402 -msgid "" -"To access a SMB printer share, the RPM package samba-client must be " -"installed." -msgstr "" -"SMB 프린터 공유에 액세스하려면 RPM 패키지 samba-client가 설치되어 있어야 합니" -"다." +#: src/include/printer/connectionwizard.rb:1402 +msgid "To access a SMB printer share, the RPM package samba-client must be installed." +msgstr "SMB 프린터 공유에 액세스하려면 RPM 패키지 samba-client가 설치되어 있어야 합니다." -#. The user can also decide during the actual installation not to install it -#. or the installation may have failed for whatever reason -#. so that we test again whether or not it is now actually installed: -#: src/include/printer/connectionwizard.rb:1418 +#. The user can also decide during the actual installation not to install it +#. or the installation may have failed for whatever reason +#. so that we test again whether or not it is now actually installed: +#: src/include/printer/connectionwizard.rb:1418 msgid "The RPM package samba-client is not installed." msgstr "RPM 패키지 samba-client가 설치되지 않았습니다." -#. TRANSLATORS: Text entry for remote server name -#: src/include/printer/connectionwizard.rb:1526 +#. TRANSLATORS: Text entry for remote server name +#: src/include/printer/connectionwizard.rb:1526 msgid "&Server (NetBIOS Host Name)" msgstr "서버(NetBIOS 호스트 이름)(&S)" -#. TRANSLATORS: Text entry for printer name -#: src/include/printer/connectionwizard.rb:1535 +#. TRANSLATORS: Text entry for printer name +#: src/include/printer/connectionwizard.rb:1535 msgid "&Printer (Share Name)" msgstr "프린터(공유 이름)(&P)" -#. TRANSLATORS: Text entry for samba domain -#: src/include/printer/connectionwizard.rb:1545 +#. TRANSLATORS: Text entry for samba domain +#: src/include/printer/connectionwizard.rb:1545 msgid "&Workgroup (Domain Name)" msgstr "작업 그룹(도메인 이름)(&W)" -#: src/include/printer/connectionwizard.rb:1552 +#: src/include/printer/connectionwizard.rb:1552 msgid "Authentication (if needed)" msgstr "인증(필요한 경우)" -#: src/include/printer/connectionwizard.rb:1555 +#: src/include/printer/connectionwizard.rb:1555 msgid "Use fixed username and password" msgstr "고정 사용자 이름 및 비밀번호 사용" -#. TRANSLATORS: Text entry for username (authentication) -#: src/include/printer/connectionwizard.rb:1565 +#. TRANSLATORS: Text entry for username (authentication) +#: src/include/printer/connectionwizard.rb:1565 msgid "&User" msgstr "사용자(&U)" -#. TRANSLATORS: Text entry for password (authentication) -#: src/include/printer/connectionwizard.rb:1573 +#. TRANSLATORS: Text entry for password (authentication) +#: src/include/printer/connectionwizard.rb:1573 msgid "Pass&word" msgstr "비밀번호" -#. A CheckBox to support Active Directory (R): -#: src/include/printer/connectionwizard.rb:1585 +#. A CheckBox to support Active Directory (R): +#: src/include/printer/connectionwizard.rb:1585 msgid "Support for &Active Directory (R)" msgstr "Active Directory (R) 지원(&A)" -#. TRANSLATORS: Label for menu to search for remote servers -#. TRANSLATORS: Text entry for name of remote printer queue -#: src/include/printer/connectionwizard.rb:1654 -#: src/include/printer/connectionwizard.rb:1765 -#: src/include/printer/connectionwizard.rb:1872 +#. TRANSLATORS: Label for menu to search for remote servers +#. TRANSLATORS: Text entry for name of remote printer queue +#: src/include/printer/connectionwizard.rb:1654 +#: src/include/printer/connectionwizard.rb:1765 +#: src/include/printer/connectionwizard.rb:1872 msgid "Queue Name" msgstr "대기열 이름" -#: src/include/printer/connectionwizard.rb:1757 +#: src/include/printer/connectionwizard.rb:1757 msgid "Scan for IPP Servers" msgstr "IPP 서버 검색" -#: src/include/printer/connectionwizard.rb:1758 +#: src/include/printer/connectionwizard.rb:1758 msgid "Scan for IPP Broadcasts" msgstr "IPP 브로드캐스트 검색" -#: src/include/printer/connectionwizard.rb:1792 +#: src/include/printer/connectionwizard.rb:1792 msgid "To access an IPX print queue, the RPM package ncpfs must be installed." -msgstr "" -"IPX 프린트 대기열에 액세스하려면 RPM 패키지 ncpfs가 설치되어 있어야 합니다." +msgstr "IPX 프린트 대기열에 액세스하려면 RPM 패키지 ncpfs가 설치되어 있어야 합니다." -#. The user can also decide during the actual installation not to install it -#. or the installation may have failed for whatever reason -#. so that we test again whether or not it is now actually installed: -#: src/include/printer/connectionwizard.rb:1808 +#. The user can also decide during the actual installation not to install it +#. or the installation may have failed for whatever reason +#. so that we test again whether or not it is now actually installed: +#: src/include/printer/connectionwizard.rb:1808 msgid "The RPM package ncpfs is not installed." msgstr "RPM 패키지 ncpfs가 설치되지 않았음" -#. TRANSLATORS: Text entry for IP or hostname of remote server -#: src/include/printer/connectionwizard.rb:1864 +#. TRANSLATORS: Text entry for IP or hostname of remote server +#: src/include/printer/connectionwizard.rb:1864 msgid "IP Address or Host Name" msgstr "IP 주소 또는 호스트 이름" -#: src/include/printer/connectionwizard.rb:1878 +#: src/include/printer/connectionwizard.rb:1878 msgid "Authenticate as" msgstr "다음으로 인증" -#. TRANSLATORS: Text entry for username (authentication) -#: src/include/printer/connectionwizard.rb:1883 +#. TRANSLATORS: Text entry for username (authentication) +#: src/include/printer/connectionwizard.rb:1883 msgid "User" msgstr "사용자" -#. TRANSLATORS: Text entry for password (authentication) -#: src/include/printer/connectionwizard.rb:1889 +#. TRANSLATORS: Text entry for password (authentication) +#: src/include/printer/connectionwizard.rb:1889 msgid "&Password" msgstr "비밀번호(&P)" -#. TRANSLATORS: Text entry for URI (Uniform Resource Identifier) -#: src/include/printer/connectionwizard.rb:1976 +#. TRANSLATORS: Text entry for URI (Uniform Resource Identifier) +#: src/include/printer/connectionwizard.rb:1976 msgid "URI (Uniform Resource Identifier) [percent-encoded]" msgstr "URI(Uniform Resource Identifier) [percent-encoded]" -#: src/include/printer/connectionwizard.rb:1985 +#: src/include/printer/connectionwizard.rb:1985 msgid "To print via 'pipe', the RPM package cups-backends must be installed." -msgstr "" -"'pipe'를 통해 인쇄하려면, cups-backends라는 RPM 패키지가 설치되어 있어야 합니" -"다." +msgstr "'pipe'를 통해 인쇄하려면, cups-backends라는 RPM 패키지가 설치되어 있어야 합니다." -#. The user can also decide during the actual installation not to install it -#. or the installation may have failed for whatever reason -#. so that we test again whether or not it is now actually installed: -#. The user can also decide during the actual installation not to install it -#. or the installation may have failed for whatever reason -#. so that we test again whether or not it is now actually installed: -#: src/include/printer/connectionwizard.rb:2002 -#: src/include/printer/connectionwizard.rb:2061 +#. The user can also decide during the actual installation not to install it +#. or the installation may have failed for whatever reason +#. so that we test again whether or not it is now actually installed: +#. The user can also decide during the actual installation not to install it +#. or the installation may have failed for whatever reason +#. so that we test again whether or not it is now actually installed: +#: src/include/printer/connectionwizard.rb:2002 +#: src/include/printer/connectionwizard.rb:2061 msgid "The RPM package cups-backends is not installed." msgstr "RPM 패키지 cups-backends가 설치되지 않았음" -#. TRANSLATORS: Text entry for program name that will be called via pipe: -#: src/include/printer/connectionwizard.rb:2034 +#. TRANSLATORS: Text entry for program name that will be called via pipe: +#: src/include/printer/connectionwizard.rb:2034 msgid "Program (/path/to/command?option=value) [percent-encoded]" msgstr "프로그램(/path/to/command?option=value) [percent-encoded]" -#: src/include/printer/connectionwizard.rb:2044 +#: src/include/printer/connectionwizard.rb:2044 msgid "To use 'beh', the RPM package cups-backends must be installed." msgstr "'beh'를 사용하려면 RPM 패키지 cups-backends가 설치되어 있어야 합니다." -#. TRANSLATORS: Text entry for device URI (Uniform Resource Identifier) -#: src/include/printer/connectionwizard.rb:2163 +#. TRANSLATORS: Text entry for device URI (Uniform Resource Identifier) +#: src/include/printer/connectionwizard.rb:2163 msgid "Device URI (for which 'beh' should be applied) [percent-encoded]" msgstr "장치 URI('beh'를 제공해야 함) [percent-encoded]" -#. TRANSLATORS: Check box -#: src/include/printer/connectionwizard.rb:2173 +#. TRANSLATORS: Check box +#: src/include/printer/connectionwizard.rb:2173 msgid "Never Disable the Queue" msgstr "대기열을 비활성화하지 않음" -#. TRANSLATORS: Text entry -#: src/include/printer/connectionwizard.rb:2181 +#. TRANSLATORS: Text entry +#: src/include/printer/connectionwizard.rb:2181 msgid "Number of Retries ('0' means infinite retries)" msgstr "재시도 횟수('0'은 무제한 재시도를 의미함)" -#. TRANSLATORS: Text entry -#: src/include/printer/connectionwizard.rb:2189 +#. TRANSLATORS: Text entry +#: src/include/printer/connectionwizard.rb:2189 msgid "Delay in Seconds Between Two Retries" msgstr "재시도 간격(단위: 초)" -#: src/include/printer/connectionwizard.rb:2197 -#: src/include/printer/connectionwizard.rb:2293 +#: src/include/printer/connectionwizard.rb:2197 +#: src/include/printer/connectionwizard.rb:2293 msgid "Select a specific connection type." msgstr "특정 연결 유형을 선택하십시오." -#. TRANSLATORS: Label for tree widget description -#: src/include/printer/connectionwizard.rb:2215 +#. TRANSLATORS: Label for tree widget description +#: src/include/printer/connectionwizard.rb:2215 msgid "&Connection Type" msgstr "연결 유형(&C)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2220 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2220 msgid "Directly Connected Device" msgstr "직접 연결된 장치" -#. Disabled legacy "Parallel Port" so that it is no longer accessible in the dialog: -#. Item(Id(:parallel), _("Parallel Port")), -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2226 +#. Disabled legacy "Parallel Port" so that it is no longer accessible in the dialog: +#. Item(Id(:parallel), _("Parallel Port")), +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2226 msgid "USB Port" msgstr "USB 포트" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2228 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2228 msgid "HP Devices (HPLIP)" msgstr "HP 장치(HPLIP)" -#. TRANSLATORS: Tree widget item -#. Disabled legacy "Serial Port" so that it is no longer accessible in the dialog: -#. Item(Id(:serial), _("Serial Port")), -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2233 +#. TRANSLATORS: Tree widget item +#. Disabled legacy "Serial Port" so that it is no longer accessible in the dialog: +#. Item(Id(:serial), _("Serial Port")), +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2233 msgid "Bluetooth" msgstr "Bluetooth" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2239 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2239 msgid "Access Network Printer or Printserver Box via" msgstr "다음을 통해 네트워크 프린터 또는 인쇄 서버 상자에 액세스" -#: src/include/printer/connectionwizard.rb:2242 +#: src/include/printer/connectionwizard.rb:2242 msgid "TCP Port (AppSocket/JetDirect)" msgstr "TCP 포트(AppSocket/JetDirect)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2244 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2244 msgid "Line Printer Daemon (LPD) Protocol" msgstr "LPD(Line Printer Daemon) 프로토콜" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2246 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2246 msgid "Internet Printing Protocol (IPP)" msgstr "인터넷 인쇄 프로토콜(IPP)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2252 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2252 msgid "Print via Print Server Machine" msgstr "프린트 서버 컴퓨터를 통해 인쇄" -#: src/include/printer/connectionwizard.rb:2255 +#: src/include/printer/connectionwizard.rb:2255 msgid "Windows (R) or Samba (SMB/CIFS)" msgstr "Windows (R) 또는 Samba(SMB/CIFS)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2257 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2257 msgid "Traditional UNIX Server (LPR/LPD)" msgstr "기존 UNIX 서버(LPR/LPD)" -#. `item( `id(`iprint), _("iPrint (Novell OES)") ), -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2260 +#. `item( `id(`iprint), _("iPrint (Novell OES)") ), +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2260 msgid "CUPS Server (IPP)" msgstr "CUPS 서버(IPP)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2269 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2269 msgid "Special" msgstr "특수" -#: src/include/printer/connectionwizard.rb:2272 +#: src/include/printer/connectionwizard.rb:2272 msgid "Specify Arbitrary Device URI" msgstr "임의의 장치 URI 지정" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2276 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2276 msgid "Send Print Data to Other Program (pipe)" msgstr "인쇄 데이터를 기타 프로그램으로 보내기(pipe)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2279 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2279 msgid "Daisy-chain Backend Error Handler (beh)" msgstr "데이지 체인 백엔드 오류 처리기(beh)" -#. TRANSLATORS: Tree widget item -#: src/include/printer/connectionwizard.rb:2290 +#. TRANSLATORS: Tree widget item +#: src/include/printer/connectionwizard.rb:2290 msgid "Connection Settings" msgstr "연결 설정" -#. According to the YaST Style Guide (dated Thu, 06 Nov 2008) -#. there is no longer a "abort" functionality which exits the whole module. -#. Instead this button is now named "Cancel" and its functionality is -#. to go back to the Overview dialog (i.e. what the "back" button would do) -#. because it reads "Cancel - Closes the window and returns to the overview." -#. In this case the "overview" is not the actual Overview dialog but the dialog -#. from which this DriverOptionsDialog was called i.e. BasicModifyDialog. -#. Therefore the button with the "abort" functionality is not shown at all -#. and the button with the "back" functionality is named "Cancel". -#. According to the YaST Style Guide (dated Thu, 06 Nov 2008) -#. the "finish" button in a single (step) configuration dialog must now be named "OK". -#: src/include/printer/connectionwizard.rb:2313 +#. According to the YaST Style Guide (dated Thu, 06 Nov 2008) +#. there is no longer a "abort" functionality which exits the whole module. +#. Instead this button is now named "Cancel" and its functionality is +#. to go back to the Overview dialog (i.e. what the "back" button would do) +#. because it reads "Cancel - Closes the window and returns to the overview." +#. In this case the "overview" is not the actual Overview dialog but the dialog +#. from which this DriverOptionsDialog was called i.e. BasicModifyDialog. +#. Therefore the button with the "abort" functionality is not shown at all +#. and the button with the "back" functionality is named "Cancel". +#. According to the YaST Style Guide (dated Thu, 06 Nov 2008) +#. the "finish" button in a single (step) configuration dialog must now be named "OK". +#: src/include/printer/connectionwizard.rb:2313 msgid "Connection Wizard" msgstr "연결 마법사" -#. see https://bugzilla.novell.com/show_bug.cgi?id=580121 -#. and http://www.cups.org/str.php?L3500 -#. i.e. the scsi backend will be dropped. -#. Therefore in yast2-printer SCSI printer support is also dropped. -#. Because of the dropped scsi backend there must be a user notification: -#: src/include/printer/connectionwizard.rb:2366 +#. see https://bugzilla.novell.com/show_bug.cgi?id=580121 +#. and http://www.cups.org/str.php?L3500 +#. i.e. the scsi backend will be dropped. +#. Therefore in yast2-printer SCSI printer support is also dropped. +#. Because of the dropped scsi backend there must be a user notification: +#: src/include/printer/connectionwizard.rb:2366 msgid "In CUPS version 1.5 SCSI printer support is dropped." msgstr "CUPS 버전 1.5에서는 SCSI 프린터 지원이 삭제되었습니다." -#. Popup::ErrorDetails details (for experts only): -#: src/include/printer/connectionwizard.rb:2368 +#. Popup::ErrorDetails details (for experts only): +#: src/include/printer/connectionwizard.rb:2368 msgid "" "An untested and insecure workaround might be\n" "to set 'FileDevice Yes' in cupsd.conf\n" @@ -1151,16 +1112,16 @@ "cupsd.conf에서 'FileDevice Yes'를 설정하고\n" "'file:/dev/sg...' 등의 DeviceURI를 사용하는 것일 수 있습니다." -#. while a Device URI to access a network printer via IPP -#. does probably not contain "/printers/" so that this is used here -#. as a best effort attempt to distinguish both cases: -#: src/include/printer/connectionwizard.rb:2443 +#. while a Device URI to access a network printer via IPP +#. does probably not contain "/printers/" so that this is used here +#. as a best effort attempt to distinguish both cases: +#: src/include/printer/connectionwizard.rb:2443 msgid "Select a connection" msgstr "연결 선택" -#. Body of a Popup::AnyMessage when no connection was selected -#. because there is no connection available to be selected: -#: src/include/printer/connectionwizard.rb:2446 +#. Body of a Popup::AnyMessage when no connection was selected +#. because there is no connection available to be selected: +#: src/include/printer/connectionwizard.rb:2446 msgid "" "If no connection is shown here, it is not possible\n" "to access the device via this type of connection.\n" @@ -1170,13 +1131,13 @@ "이 연결 유형을 통해 장치에 액세스할 수 없습니다.\n" "프린터가 항상 연결되고 켜져 있었습니까?" -#: src/include/printer/connectionwizard.rb:2454 +#: src/include/printer/connectionwizard.rb:2454 msgid "Select a valid connection" msgstr "유효한 연결 선택" -#. Body of a Popup::AnyMessage when an invalid connection was selected -#. because the current connection is no longer valid: -#: src/include/printer/connectionwizard.rb:2457 +#. Body of a Popup::AnyMessage when an invalid connection was selected +#. because the current connection is no longer valid: +#: src/include/printer/connectionwizard.rb:2457 msgid "" "When the current connection is no longer valid,\n" "it does no longer work to access the device via this connection.\n" @@ -1186,93 +1147,91 @@ "더 이상 이 연결을 통해 장치에 액세스하지 않습니다.\n" "프린터가 여전히 연결되고 켜져 있습니까?" -#: src/include/printer/connectionwizard.rb:2497 +#: src/include/printer/connectionwizard.rb:2497 msgid "Serial device and baud rate could not be empty." msgstr "직렬 장치와 전송 속도는 비워둘 수 없습니다." -#: src/include/printer/connectionwizard.rb:2501 +#: src/include/printer/connectionwizard.rb:2501 msgid "The 'space' parity checking is only supported with 7 data bits." msgstr "'space' 패리티 확인은 7 데이터 비트에 한해서만 지원합니다." -#: src/include/printer/connectionwizard.rb:2509 -msgid "" -"The 'mark' parity checking is only supported with 7 data bits and 1 stop bit." -msgstr "" -"'mark' 패리티 확인은 7 데이터 비트와 1 스톱 비트에 한해서만 지원합니다." +#: src/include/printer/connectionwizard.rb:2509 +msgid "The 'mark' parity checking is only supported with 7 data bits and 1 stop bit." +msgstr "'mark' 패리티 확인은 7 데이터 비트와 1 스톱 비트에 한해서만 지원합니다." -#: src/include/printer/connectionwizard.rb:2551 +#: src/include/printer/connectionwizard.rb:2551 msgid "Bluetooth device ID could not be empty." msgstr "Bluetooth 장치 ID는 비워둘 수 없습니다." -#. because special URI characters like ':' or '/' in connection_uri -#. must stay as is and not be percent encoded because only the values -#. of the URI parts must be percent encoded but not the whole URI. -#: src/include/printer/connectionwizard.rb:2564 +#. because special URI characters like ':' or '/' in connection_uri +#. must stay as is and not be percent encoded because only the values +#. of the URI parts must be percent encoded but not the whole URI. +#: src/include/printer/connectionwizard.rb:2564 msgid "URI could not be empty." msgstr "URI 는 비워둘 수 없습니다." -#: src/include/printer/connectionwizard.rb:2574 +#: src/include/printer/connectionwizard.rb:2574 msgid "Servername and printer could not be empty." msgstr "서버 이름과 프린터는 비워둘 수 없습니다." -#: src/include/printer/connectionwizard.rb:2580 +#: src/include/printer/connectionwizard.rb:2580 msgid "Both user and password must be specified." msgstr "사용자와 비밀번호 둘 다 지정해야 합니다." -#. because special URI characters like '=' or '&' in tcp_uri_options -#. must stay as is and not be percent encoded because tcp_uri_options -#. contains all options like 'option1=value1&option2=value2'. -#. Test whether or not a "client-only" server is accessible. -#. @param [String] server_name string of the "client-only" server name -#. -#. @return false if the "client-only" server is not accessible. -#: src/include/printer/connectionwizard.rb:2644 src/modules/Printer.rb:2348 +#. because special URI characters like '=' or '&' in tcp_uri_options +#. must stay as is and not be percent encoded because tcp_uri_options +#. contains all options like 'option1=value1&option2=value2'. +#. Test whether or not a "client-only" server is accessible. +#. @param [String] server_name string of the "client-only" server name +#. +#. @return false if the "client-only" server is not accessible. +#: src/include/printer/connectionwizard.rb:2644 src/modules/Printer.rb:2348 msgid "Servername could not be empty." msgstr "서버 이름은 비워 둘 수 없습니다." -#. because special URI characters like '=' or '&' in lpd_uri_options -#. must stay as is and not be percent encoded because lpd_uri_options -#. contains all options like 'option1=value1&option2=value2'. -#. because special URI characters like '=' or '&' in cups_uri_options -#. must stay as is and not be percent encoded because cups_uri_options -#. contains all options like 'option1=value1&option2=value2'. -#: src/include/printer/connectionwizard.rb:2682 -#: src/include/printer/connectionwizard.rb:2721 -#: src/include/printer/connectionwizard.rb:2748 +#. because special URI characters like '=' or '&' in lpd_uri_options +#. must stay as is and not be percent encoded because lpd_uri_options +#. contains all options like 'option1=value1&option2=value2'. +#. because special URI characters like '=' or '&' in cups_uri_options +#. must stay as is and not be percent encoded because cups_uri_options +#. contains all options like 'option1=value1&option2=value2'. +#: src/include/printer/connectionwizard.rb:2682 +#: src/include/printer/connectionwizard.rb:2721 +#: src/include/printer/connectionwizard.rb:2748 msgid "Servername and queue name could not be empty." msgstr "서버 이름과 대기열 이름은 비워둘 수 없습니다." -#: src/include/printer/connectionwizard.rb:2775 +#: src/include/printer/connectionwizard.rb:2775 msgid "Device URI, number of retries, and delay could not be empty." msgstr "장치 URI, 재시도 횟수 및 지연은 비워둘 수 없습니다." -#. because special URI characters like '/ ? = &' in pipe -#. must stay as is and not be percent encoded because pipe -#. contains all like 'path/to/command?option1=value1&option2=value2' -#: src/include/printer/connectionwizard.rb:2789 +#. because special URI characters like '/ ? = &' in pipe +#. must stay as is and not be percent encoded because pipe +#. contains all like 'path/to/command?option1=value1&option2=value2' +#: src/include/printer/connectionwizard.rb:2789 msgid "Could not be empty." msgstr "비워둘 수 없습니다." -#. Do not change or translate "raw", it is a technical term -#. when no driver is used for a print queue. -#: src/include/printer/connectionwizard.rb:2812 +#. Do not change or translate "raw", it is a technical term +#. when no driver is used for a print queue. +#: src/include/printer/connectionwizard.rb:2812 msgid "Select a manufacturer or 'raw queue'." msgstr "제조업체 또는 '원시 대기열'을 선택하십시오." -#: src/include/printer/connectionwizard.rb:2830 +#: src/include/printer/connectionwizard.rb:2830 msgid "Look up all hosts in the local network" msgstr "로컬 네트워크에서 모든 호스트 조회" -#. Body of a Popup::ShowFeedback: -#. Body of a Popup::ShowFeedback: -#. Body of a Popup::ShowFeedback: -#. Body of a Popup::ShowFeedback: -#. Body of a Popup::ShowFeedback: -#: src/include/printer/connectionwizard.rb:2832 -#: src/include/printer/connectionwizard.rb:2859 -#: src/include/printer/connectionwizard.rb:2874 -#: src/include/printer/connectionwizard.rb:2889 -#: src/include/printer/connectionwizard.rb:2904 +#. Body of a Popup::ShowFeedback: +#. Body of a Popup::ShowFeedback: +#. Body of a Popup::ShowFeedback: +#. Body of a Popup::ShowFeedback: +#. Body of a Popup::ShowFeedback: +#: src/include/printer/connectionwizard.rb:2832 +#: src/include/printer/connectionwizard.rb:2859 +#: src/include/printer/connectionwizard.rb:2874 +#: src/include/printer/connectionwizard.rb:2889 +#: src/include/printer/connectionwizard.rb:2904 msgid "" "Please wait...\n" "This could take more than a minute." @@ -1280,36 +1239,36 @@ "기다려 주십시오.\n" "1분 이상 걸릴 수 있습니다." -#. where %1 will be replaced by the port number: -#: src/include/printer/connectionwizard.rb:2855 +#. where %1 will be replaced by the port number: +#: src/include/printer/connectionwizard.rb:2855 msgid "Scan for hosts which are accessible via TCP port %1" msgstr "TCP 포트 %1을(를) 통해 액세스할 수 있는 호스트 검색" -#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case -#. before it is removed even when the above SCR::Read finished immediately: -#: src/include/printer/connectionwizard.rb:2872 +#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case +#. before it is removed even when the above SCR::Read finished immediately: +#: src/include/printer/connectionwizard.rb:2872 msgid "Scan for hosts which are accessible via Samba (SMB)" msgstr "Samba(SMB)를 통해 액세스할 수 있는 호스트 검색" -#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case -#. before it is removed even when the above SCR::Read finished immediately: -#: src/include/printer/connectionwizard.rb:2887 +#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case +#. before it is removed even when the above SCR::Read finished immediately: +#: src/include/printer/connectionwizard.rb:2887 msgid "Scan for hosts which are accessible via port 515 (LPD/LPR)" msgstr "포트 515(LPD/LPR)를 통해 액세스할 수 있는 호스트 검색" -#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case -#. before it is removed even when the above SCR::Read finished immediately: -#: src/include/printer/connectionwizard.rb:2902 +#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case +#. before it is removed even when the above SCR::Read finished immediately: +#: src/include/printer/connectionwizard.rb:2902 msgid "Scan for hosts which are accessible via port 631 (CUPS/IPP)" msgstr "포트 631(CUPS/IPP)을 통해 액세스할 수 있는 호스트 검색" -#. hosts = (list<string>)filter (string h, hosts, ``{ -#. list queues = (list<string>)SCR::Read (.cups.remote, h); -#. return size (queues) > 0; -#. }); -#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case -#. before it is removed even when the above SCR::Read finished immediately: -#: src/include/printer/connectionwizard.rb:2929 +#. hosts = (list<string>)filter (string h, hosts, ``{ +#. list queues = (list<string>)SCR::Read (.cups.remote, h); +#. return size (queues) > 0; +#. }); +#. Sleep half a second to let the user notice the Popup::ShowFeedback in any case +#. before it is removed even when the above SCR::Read finished immediately: +#: src/include/printer/connectionwizard.rb:2929 msgid "" "Scanning in the network did not find any host.\n" "(Network issue or firewall active?)" @@ -1317,26 +1276,26 @@ "네트워크 검색에서 호스트를 찾을 수 없습니다.\n" "(네트워크 문제 또는 방화벽 활성?)" -#. where %1 will be replaced by the port number -#. and %2 will be replaced by the host name: -#: src/include/printer/connectionwizard.rb:2969 +#. where %1 will be replaced by the port number +#. and %2 will be replaced by the host name: +#: src/include/printer/connectionwizard.rb:2969 msgid "Access test failed for port '%1' on host '%2'." msgstr "호스트 '%2'에서 포트 '%1'에 대한 액세스 테스트가 실패했습니다." -#. where %1 will be replaced by the queue name -#. and %2 will be replaced by the host name: -#. where %1 will be replaced by the queue name -#. and %2 will be replaced by the host name: -#. where %1 will be replaced by the queue name -#. and %2 will be replaced by the host name: -#: src/include/printer/connectionwizard.rb:2996 -#: src/include/printer/connectionwizard.rb:3022 -#: src/include/printer/connectionwizard.rb:3121 +#. where %1 will be replaced by the queue name +#. and %2 will be replaced by the host name: +#. where %1 will be replaced by the queue name +#. and %2 will be replaced by the host name: +#. where %1 will be replaced by the queue name +#. and %2 will be replaced by the host name: +#: src/include/printer/connectionwizard.rb:2996 +#: src/include/printer/connectionwizard.rb:3022 +#: src/include/printer/connectionwizard.rb:3121 msgid "Access test failed for queue '%1' on host '%2'." msgstr "호스트 '%2'에서 대기열 '%1'에 대한 액세스 테스트가 실패했습니다." -#. because there is authentication via Active Directory (R) required: -#: src/include/printer/connectionwizard.rb:3040 +#. because there is authentication via Active Directory (R) required: +#: src/include/printer/connectionwizard.rb:3040 msgid "" "This is only a generic test which may untruly report failures\n" "if authentication via Active Directory (R) is required.\n" @@ -1348,251 +1307,243 @@ "이 경우 Active Directory (R)를 통해 인쇄할 수 있는 사용자가\n" "로그인하여 Gnome 또는 KDE에서 인쇄할 수 있는지 직접 테스트해야 합니다." -#. where %1 will be replaced by the SMB share name -#. and %2 will be replaced by the host name: -#: src/include/printer/connectionwizard.rb:3071 +#. where %1 will be replaced by the SMB share name +#. and %2 will be replaced by the host name: +#: src/include/printer/connectionwizard.rb:3071 msgid "The generic test reports failures for share '%1' on host '%2'." msgstr "일반 테스트는 '%2' 호스트의 '%1' 공유에 대한 실패를 보고합니다." -#. where %1 will be replaced by the SMB share name -#. and %2 will be replaced by the host name: -#: src/include/printer/connectionwizard.rb:3091 +#. where %1 will be replaced by the SMB share name +#. and %2 will be replaced by the host name: +#: src/include/printer/connectionwizard.rb:3091 msgid "Access test failed for share '%1' on host '%2'." msgstr "호스트 '%2'에서 공유 '%1'에 대한 액세스 테스트가 실패했습니다." -#. Message of a Popup::ErrorDetails -#: src/include/printer/connectionwizard.rb:3133 +#. Message of a Popup::ErrorDetails +#: src/include/printer/connectionwizard.rb:3133 msgid "Test OK" msgstr "테스트 정상" -#. Without a link name /usr/lib[64]/cups/backend/smb (which is provided by samba-client) -#. the rest makes no sense (in particular the ln commands would create nonsense links in $PWD): -#: src/include/printer/connectionwizard.rb:3273 -msgid "" -"To support Active Directory (R), the RPM package samba-krb-printing must be " -"installed." -msgstr "" -"Active Directory (R)를 지원하려면 RPM 패키지 samba-krb-printing을 설치해야 합" -"니다." +#. Without a link name /usr/lib[64]/cups/backend/smb (which is provided by samba-client) +#. the rest makes no sense (in particular the ln commands would create nonsense links in $PWD): +#: src/include/printer/connectionwizard.rb:3273 +msgid "To support Active Directory (R), the RPM package samba-krb-printing must be installed." +msgstr "Active Directory (R)를 지원하려면 RPM 패키지 samba-krb-printing을 설치해야 합니다." -#. Show a user notification before it gets disabled: -#: src/include/printer/connectionwizard.rb:3313 +#. Show a user notification before it gets disabled: +#: src/include/printer/connectionwizard.rb:3313 msgid "Active Directory (R) support will be disabled for all SMB print queues." -msgstr "" -"모든 SMB 프린트 대기열에 대해 Active Directory (R) 지원이 비활성화됩니다." +msgstr "모든 SMB 프린트 대기열에 대해 Active Directory (R) 지원이 비활성화됩니다." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/printer/dialogs.ycp -#. Package: Configuration of printer -#. Summary: DialogTree definition -#. Authors: Michal Zugec -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/printer/dialogs.rb:107 src/include/printer/dialogs.rb:108 -#: src/include/printer/dialogs.rb:109 src/include/printer/dialogs.rb:176 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/printer/dialogs.ycp +#. Package: Configuration of printer +#. Summary: DialogTree definition +#. Authors: Michal Zugec +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/printer/dialogs.rb:107 src/include/printer/dialogs.rb:108 +#: src/include/printer/dialogs.rb:109 src/include/printer/dialogs.rb:176 msgid "Printer Configurations" msgstr "프린터 구성" -#: src/include/printer/dialogs.rb:114 src/include/printer/dialogs.rb:115 -#: src/include/printer/dialogs.rb:116 src/include/printer/dialogs.rb:183 +#: src/include/printer/dialogs.rb:114 src/include/printer/dialogs.rb:115 +#: src/include/printer/dialogs.rb:116 src/include/printer/dialogs.rb:183 msgid "Print via Network" msgstr "네트워크를 통해 인쇄" -#: src/include/printer/dialogs.rb:121 src/include/printer/dialogs.rb:122 -#: src/include/printer/dialogs.rb:123 +#: src/include/printer/dialogs.rb:121 src/include/printer/dialogs.rb:122 +#: src/include/printer/dialogs.rb:123 msgid "Share Printers" msgstr "프린터 공유" -#: src/include/printer/dialogs.rb:128 src/include/printer/dialogs.rb:129 -#: src/include/printer/dialogs.rb:130 +#: src/include/printer/dialogs.rb:128 src/include/printer/dialogs.rb:129 +#: src/include/printer/dialogs.rb:130 msgid "Policies" msgstr "정책" -#: src/include/printer/dialogs.rb:135 src/include/printer/dialogs.rb:136 -#: src/include/printer/dialogs.rb:137 +#: src/include/printer/dialogs.rb:135 src/include/printer/dialogs.rb:136 +#: src/include/printer/dialogs.rb:137 msgid "Automatic Configuration" msgstr "자동 구성" -#: src/include/printer/dialogs.rb:175 src/include/printer/dialogs.rb:177 +#: src/include/printer/dialogs.rb:175 src/include/printer/dialogs.rb:177 msgid "AutoYaST Printer Configurations" msgstr "AutoYaST 프린터 구성" -#: src/include/printer/dialogs.rb:182 src/include/printer/dialogs.rb:184 +#: src/include/printer/dialogs.rb:182 src/include/printer/dialogs.rb:184 msgid "AutoYaST Print via Network Settings" msgstr "네트워크 설정을 통해 AutoYaST 인쇄" -#: src/include/printer/dialogs.rb:192 +#: src/include/printer/dialogs.rb:192 msgid "Detected Printers" msgstr "검색된 프린터" -#. All the dialogs in "ids_order" are single (step) configuration dialogs -#. and according to the YaST Style Guide (dated Thu, 06 Nov 2008) -#. there is no longer a "abort" functionality which exits the whole module. -#. Instead this button is now named "Cancel" and its functionality is -#. to go back to the Overview dialog (i.e. what the "back" button would do) -#. because it reads "Cancel - Closes the window and returns to the overview." -#. Therefore the button with the "abort" functionality is not shown at all -#. and the button with the "back" functionality is named "Cancel". -#: src/include/printer/dialogs.rb:222 +#. All the dialogs in "ids_order" are single (step) configuration dialogs +#. and according to the YaST Style Guide (dated Thu, 06 Nov 2008) +#. there is no longer a "abort" functionality which exits the whole module. +#. Instead this button is now named "Cancel" and its functionality is +#. to go back to the Overview dialog (i.e. what the "back" button would do) +#. because it reads "Cancel - Closes the window and returns to the overview." +#. Therefore the button with the "abort" functionality is not shown at all +#. and the button with the "back" functionality is named "Cancel". +#: src/include/printer/dialogs.rb:222 msgid "AutoYaST Settings for Printing with CUPS via Network" msgstr "네트워크를 통해 CUPS로 인쇄하기 위한 AutoYaST 설정" -#. AddDriver dialog -#. @return dialog result -#: src/include/printer/driveradd.rb:47 +#. AddDriver dialog +#. @return dialog result +#: src/include/printer/driveradd.rb:47 msgid "Driver Packages" msgstr "드라이버 패키지" -#. Header for a dialog section where the user can -#. add or remove printer driver packages: -#: src/include/printer/driveradd.rb:98 +#. Header for a dialog section where the user can +#. add or remove printer driver packages: +#: src/include/printer/driveradd.rb:98 msgid "Install or Remove Printer Driver Packages" msgstr "프린터 드라이버 패키지 설치 또는 제거" -#. CheckBox to select or un-select the printer driver package OpenPrintingPPDs-ghostscript. -#. There is no need to have the package name "OpenPrintingPPDs-ghostscript" in this text -#. because it is shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:111 +#. CheckBox to select or un-select the printer driver package OpenPrintingPPDs-ghostscript. +#. There is no need to have the package name "OpenPrintingPPDs-ghostscript" in this text +#. because it is shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:111 msgid "Printer Description Files for Ghostscript Drivers" msgstr "Ghostscript 드라이버에 대한 프린터 설명 파일" -#. CheckBox to select or un-select the printer driver package OpenPrintingPPDs-hpijs. -#. There is no need to have the package name "OpenPrintingPPDs-hpijs" in this text -#. because it is shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:122 +#. CheckBox to select or un-select the printer driver package OpenPrintingPPDs-hpijs. +#. There is no need to have the package name "OpenPrintingPPDs-hpijs" in this text +#. because it is shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:122 msgid "Printer Description Files for some PCL Printers" msgstr "일부 PCL 프린터에 대한 프린터 설명 파일" -#. CheckBox to select or un-select the printer driver package OpenPrintingPPDs-postscript. -#. There is no need to have the package name "OpenPrintingPPDs-postscript" in this text -#. because it is shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:133 +#. CheckBox to select or un-select the printer driver package OpenPrintingPPDs-postscript. +#. There is no need to have the package name "OpenPrintingPPDs-postscript" in this text +#. because it is shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:133 msgid "Printer Description Files for PostScript Printers" msgstr "PostScript 프린터용 프린터 설명 파일" -#. CheckBox to select or un-select the printer driver package gutenprint. -#. There is no need to have the package name "gutenprint" in this text -#. because it is shown in a separated column to the left of this text. -#. Do not change or translate "Gutenprint", it is a open source project name. -#. Do not change or translate "Gimp-Print", it is a open source project name. -#: src/include/printer/driveradd.rb:146 +#. CheckBox to select or un-select the printer driver package gutenprint. +#. There is no need to have the package name "gutenprint" in this text +#. because it is shown in a separated column to the left of this text. +#. Do not change or translate "Gutenprint", it is a open source project name. +#. Do not change or translate "Gimp-Print", it is a open source project name. +#: src/include/printer/driveradd.rb:146 msgid "Gutenprint/Gimp-Print Driver" msgstr "Gutenprint/Gimp-Print 드라이버" -#. CheckBox to select or un-select the printer driver packages hplip and hplip-hpijs. -#. There is no need to have the package names "hplip" and "hplip-hpijs" in this text -#. because they are shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:157 +#. CheckBox to select or un-select the printer driver packages hplip and hplip-hpijs. +#. There is no need to have the package names "hplip" and "hplip-hpijs" in this text +#. because they are shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:157 msgid "Driver for HP Printers and HP All-in-One Devices" msgstr "HP 프린터 및 HP All-in-One 장치용 드라이버" -#. CheckBox to select or un-select the printer driver package manufacturer-PPDs. -#. There is no need to have the package name "manufacturer-PPDs" in this text -#. because it is shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:168 +#. CheckBox to select or un-select the printer driver package manufacturer-PPDs. +#. There is no need to have the package name "manufacturer-PPDs" in this text +#. because it is shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:168 msgid "Manufacturer's PostScript Printer Description Files" msgstr "제조업체의 PostScript 프린터 설명 파일" -#. CheckBox to select or un-select the printer driver package splix. -#. There is no need to have the package name "splix" in this text -#. because it is shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:179 +#. CheckBox to select or un-select the printer driver package splix. +#. There is no need to have the package name "splix" in this text +#. because it is shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:179 msgid "SpliX Driver for SPL Printers without JBIG" msgstr "JBIG가 없는 SPL 프린터용 SpliX 드라이버" -#. CheckBox to select or un-select the printer driver package epson-inkjet-printer-escpr. -#. There is no need to have the package name "epson-inkjet-printer-escpr" in this text -#. because it is shown in a separated column to the left of this text. -#: src/include/printer/driveradd.rb:202 +#. CheckBox to select or un-select the printer driver package epson-inkjet-printer-escpr. +#. There is no need to have the package name "epson-inkjet-printer-escpr" in this text +#. because it is shown in a separated column to the left of this text. +#: src/include/printer/driveradd.rb:202 msgid "Epson ESC/P-R Inkjet Printer Driver" msgstr "Epson ESC/P-R 잉크젯 프린터 드라이버" -#. Header for a dialog section where the user can -#. make a printer description file (PPD file) available -#. so that it can be used to set up a print queue with it: -#: src/include/printer/driveradd.rb:215 +#. Header for a dialog section where the user can +#. make a printer description file (PPD file) available +#. so that it can be used to set up a print queue with it: +#: src/include/printer/driveradd.rb:215 msgid "Make a Printer Description File Available" msgstr "사용 가능한 프린터 정의 파일 작성" -#. TextEntry to specify the full path of a PPD file: -#: src/include/printer/driveradd.rb:225 +#. TextEntry to specify the full path of a PPD file: +#: src/include/printer/driveradd.rb:225 msgid "Printer description &file name with full path where it is located" msgstr "프린터 설명 파일 이름 및 위치의 전체 경로(&F)" -#. Label of a PushButton to open a file selection box -#. to browse the file system to select a PPD file: -#: src/include/printer/driveradd.rb:235 +#. Label of a PushButton to open a file selection box +#. to browse the file system to select a PPD file: +#: src/include/printer/driveradd.rb:235 msgid "&Browse" msgstr "찾아보기(&B)" -#. Header for a AskForExistingFile popup dialog -#. to browse the file system to select a PPD file: -#: src/include/printer/driveradd.rb:274 +#. Header for a AskForExistingFile popup dialog +#. to browse the file system to select a PPD file: +#: src/include/printer/driveradd.rb:274 msgid "Select a printer description file" msgstr "프린터 설명 파일을 선택합니다." -#. where %1 will be replaced by the file name: -#: src/include/printer/driveradd.rb:666 +#. where %1 will be replaced by the file name: +#: src/include/printer/driveradd.rb:666 msgid "Cannot access '%1'" msgstr "'%1'에 액세스할 수 없습니다." -#. Simply exit this dialog because it does not make sense to proceed here -#. and there is nothing else to be done after this: -#: src/include/printer/driveradd.rb:685 -msgid "" -"The printer description file is not in compliance with the specification." +#. Simply exit this dialog because it does not make sense to proceed here +#. and there is nothing else to be done after this: +#: src/include/printer/driveradd.rb:685 +msgid "The printer description file is not in compliance with the specification." msgstr "프린터 설명 파일이 사양을 준수하지 않습니다." -#. when a PPD file is not in compliance: -#: src/include/printer/driveradd.rb:700 +#. when a PPD file is not in compliance: +#: src/include/printer/driveradd.rb:700 msgid "Use the printer description file regardless of its errors?" msgstr "오류와 상관 없이 프린터 설명 파일을 사용하시겠습니까?" -#. Body of a Popup::ContinueCancelHeadline -#. when PPD file is not in compliance: -#: src/include/printer/driveradd.rb:705 -msgid "" -"A non-compliant printer description file can lead to arbitrary failures." -msgstr "" -"호환되지 않는 프린터 설명 파일로 인해 예상치 못한 오류가 발생할 수 있습니다." +#. Body of a Popup::ContinueCancelHeadline +#. when PPD file is not in compliance: +#: src/include/printer/driveradd.rb:705 +msgid "A non-compliant printer description file can lead to arbitrary failures." +msgstr "호환되지 않는 프린터 설명 파일로 인해 예상치 못한 오류가 발생할 수 있습니다." -#: src/include/printer/driveradd.rb:722 +#: src/include/printer/driveradd.rb:722 msgid "Failed to make the printer description file available" msgstr "프린터 설명 파일을 사용할 수 있게 하지 못했습니다." -#. Title of the Driver Options Dialog where %1 will be replaced by the queue name. -#. The actual queue name is a system value which cannot be translated: -#: src/include/printer/driveroptions.rb:55 +#. Title of the Driver Options Dialog where %1 will be replaced by the queue name. +#. The actual queue name is a system value which cannot be translated: +#: src/include/printer/driveroptions.rb:55 msgid "Driver Options for Queue %1" msgstr "대기열 %1의 드라이버 옵션" -#. where %1 will be replaced by the queue name. -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/include/printer/driveroptions.rb:138 +#. where %1 will be replaced by the queue name. +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/include/printer/driveroptions.rb:138 msgid "Failed to set driver options for queue %1." msgstr "대기열 %1에 대한 드라이버 옵션을 설정하지 못했습니다." -#. Read dialog help 1/1: -#: src/include/printer/helps.rb:37 +#. Read dialog help 1/1: +#: src/include/printer/helps.rb:37 msgid "" "<p>\n" "<b><big>Initializing printer Configuration</big></b><br>\n" @@ -1602,8 +1553,8 @@ "<b><big>프린터 구성 초기화</big></b><br>\n" "</p>\n" -#. Write dialog help 1/1: -#: src/include/printer/helps.rb:44 +#. Write dialog help 1/1: +#: src/include/printer/helps.rb:44 msgid "" "<p>\n" "<b><big>Finishing printer Configuration</big></b><br>\n" @@ -1613,21 +1564,19 @@ "<b><big>프린터 구성 완료</big></b><br>\n" "</p>\n" -#. Overview dialog help 1/7: -#: src/include/printer/helps.rb:51 +#. Overview dialog help 1/7: +#: src/include/printer/helps.rb:51 msgid "" "<p>\n" "<b><big>Print Queue Overview</big></b><br>\n" "A printer device is not used directly but via a print queue.<br>\n" "When various applications submit print jobs simultaneously,\n" -"these jobs are put in a queue and are sent one after the other to the " -"printer\n" +"these jobs are put in a queue and are sent one after the other to the printer\n" "device.<br>\n" "It is possible to have several different print queues for the same printer\n" "device.\n" "For example a second queue with a monochrome-only driver for a color device\n" -"or a PostScript queue and a queue with a PCL driver for a PostScript+PCL " -"printer.\n" +"or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer.\n" "</p>\n" msgstr "" "<p>\n" @@ -1639,12 +1588,11 @@ "동일한 프린터 장치에 대해 여러 다른 프린트 대기열이\n" "있을 수 있습니다.\n" "예를 들어 컬러 장치용 단색 전용 드라이버가 있는 두 번째 대기열이나\n" -"PostScript 대기열 및 PostScript+PCL 프린터용 PCL 드라이버가 있는 대기열입니" -"다.\n" +"PostScript 대기열 및 PostScript+PCL 프린터용 PCL 드라이버가 있는 대기열입니다.\n" "</p>\n" -#. Overview dialog help 2/7: -#: src/include/printer/helps.rb:65 +#. Overview dialog help 2/7: +#: src/include/printer/helps.rb:65 msgid "" "<p>\n" "<b><big>Using Remote Queues:</big></b><br>\n" @@ -1666,8 +1614,8 @@ "설정할 필요가 없습니다.<br>\n" "</p>\n" -#. Overview dialog help 3/7: -#: src/include/printer/helps.rb:77 +#. Overview dialog help 3/7: +#: src/include/printer/helps.rb:77 msgid "" "<p>\n" "<b><big>Configure a printer:</big></b><br>\n" @@ -1679,8 +1627,8 @@ "프린터 장치의 새 대기열을 설정하려면 <b>추가</b>를 누릅니다.\n" "</p>" -#. Overview dialog help 4/7: -#: src/include/printer/helps.rb:84 +#. Overview dialog help 4/7: +#: src/include/printer/helps.rb:84 msgid "" "<p>\n" "<b><big>Change the settings for a queue:</big></b><br>\n" @@ -1692,8 +1640,8 @@ "로컬 대기열을 선택하고 <b>편집</b>을 누르십시오.\n" "</p>" -#. Overview dialog help 5/7: -#: src/include/printer/helps.rb:91 +#. Overview dialog help 5/7: +#: src/include/printer/helps.rb:91 msgid "" "<p>\n" "<b><big>Remove a queue:</big></b><br>\n" @@ -1705,8 +1653,8 @@ "로컬 대기열을 선택하고 <b>삭제</b>를 누릅니다.\n" "</p>" -#. Overview dialog help 6/7: -#: src/include/printer/helps.rb:98 +#. Overview dialog help 6/7: +#: src/include/printer/helps.rb:98 msgid "" "<p>\n" "<b><big>Print a test page:</big></b><br>\n" @@ -1718,8 +1666,8 @@ "대기열을 선택하고 <b>테스트 페이지 인쇄</b>를 누릅니다.\n" "</p>" -#. Overview dialog help 7/7: -#: src/include/printer/helps.rb:105 +#. Overview dialog help 7/7: +#: src/include/printer/helps.rb:105 msgid "" "<p>\n" "<b><big>Refresh the list of queues:</big></b><br>\n" @@ -1741,8 +1689,8 @@ "<b>목록 새로 고침</b>을 누르십시오.\n" "</p>\n" -#. AutoYaST Overview dialog help 1/1: -#: src/include/printer/helps.rb:118 +#. AutoYaST Overview dialog help 1/1: +#: src/include/printer/helps.rb:118 msgid "" "<p>\n" "<b><big>AutoYaST Print Queue Overview</big></b><br>\n" @@ -1756,26 +1704,21 @@ "로컬 프린트 대기열 설정에 대한 AutoYaST 지원은 없습니다.\n" "</p>" -#. BasicAddDialog help 1/7: -#: src/include/printer/helps.rb:127 +#. BasicAddDialog help 1/7: +#: src/include/printer/helps.rb:127 msgid "" "<p>\n" "<b><big>Set Up a New Queue for a Printer Device</big></b><br>\n" "A printer device is not used directly but via a print queue.<br>\n" "When various application programs submit print jobs simultaneously,\n" -"the jobs queue up and are sent one after the other to the printer device." -"<br>\n" -"It is possible to have several different print queues for the same printer " -"device.\n" -"Usually several print queues are needed when several different printer " -"drivers\n" +"the jobs queue up and are sent one after the other to the printer device.<br>\n" +"It is possible to have several different print queues for the same printer device.\n" +"Usually several print queues are needed when several different printer drivers\n" "should be used for the same printer device.\n" "For example a second queue with a monochrome-only driver\n" "to enforce black-only printout on a color device\n" -"or a PostScript queue and a queue with a PCL driver for a PostScript+PCL " -"printer\n" -"because printing via the PCL driver is usually faster (but with less " -"quality).\n" +"or a PostScript queue and a queue with a PCL driver for a PostScript+PCL printer\n" +"because printing via the PCL driver is usually faster (but with less quality).\n" "</p>" msgstr "" "<p>\n" @@ -1789,13 +1732,12 @@ "사용해야 하는 경우 여러 개의 프린트 대기열이 필요합니다.\n" "예를 들어 컬러 장치에서 흑백으로 출력하기 위한\n" "단색 전용 드라이버가 있는 두 번째 대기열이나\n" -"PostScript 대기열 및 일반적으로 PCL 드라이버를 통한 인쇄가 더 빠르기 때문에" -"(품질이 더 낮음)\n" +"PostScript 대기열 및 일반적으로 PCL 드라이버를 통한 인쇄가 더 빠르기 때문에(품질이 더 낮음)\n" "PostScript+PCL 프린터용 PCL 드라이버가 있는 대기열입니다.\n" "</p>" -#. BasicAddDialog help 2/7: -#: src/include/printer/helps.rb:143 +#. BasicAddDialog help 2/7: +#: src/include/printer/helps.rb:143 msgid "" "<p>\n" "To set up a new queue:<br>\n" @@ -1811,12 +1753,11 @@ "고유한 대기열 이름을 설정합니다.\n" "</p>" -#. BasicAddDialog help 3/7: -#: src/include/printer/helps.rb:152 +#. BasicAddDialog help 3/7: +#: src/include/printer/helps.rb:152 msgid "" "<p>\n" -"The <b>connection</b> determines which way data is sent to the printer " -"device.<br>\n" +"The <b>connection</b> determines which way data is sent to the printer device.<br>\n" "If a wrong connection is selected, no data can be sent to the device\n" "so that there cannot be any printout.<br>\n" "If a printer device is accessible via more than one connection type,\n" @@ -1824,10 +1765,8 @@ "In particular HP devices are often accessible both via the 'usb:/...'\n" "and the 'hp:/...' connection.\n" "The latter is provided by the HP driver package 'hplip'.\n" -"For plain printing, both kinds of connections should work, but for anything " -"else\n" -"(e.g. device status via 'hp-toolbox' or scanning with a HP all-in-one " -"device)\n" +"For plain printing, both kinds of connections should work, but for anything else\n" +"(e.g. device status via 'hp-toolbox' or scanning with a HP all-in-one device)\n" "the 'hp:/...' connection must be used.\n" "</p>\n" msgstr "" @@ -1841,20 +1780,18 @@ "및 'hp:/...' 연결 둘 다를 통해 액세스할 수 있습니다.\n" "후자는 HP 드라이버 패키지 'hplip'에 의해 제공됩니다.\n" "일반 인쇄의 경우 두 종류의 연결이 모두 작동해야 하지만\n" -"그 외의 경우(예: 'hp-toolbox'를 통한 장치 상태 또는 HP all-in-one 장치를 사용" -"한 검색)\n" +"그 외의 경우(예: 'hp-toolbox'를 통한 장치 상태 또는 HP all-in-one 장치를 사용한 검색)\n" "'hp:/...' 연결을 사용해야 합니다.\n" "</p>\n" -#. BasicAddDialog help 4/7: -#: src/include/printer/helps.rb:168 +#. BasicAddDialog help 4/7: +#: src/include/printer/helps.rb:168 msgid "" "<p>\n" "The <b>driver</b> determines that the right data is produced for the\n" "specific printer model.<br>\n" "If a wrong driver is assigned, wrong data is sent to the printer\n" -"which results bad looking printout, chaotic printout, or no printout at all." -"<br>\n" +"which results bad looking printout, chaotic printout, or no printout at all.<br>\n" "Initially the input field for the driver search string is preset\n" "with the autodetected model name of the currently selected connection\n" "and those drivers where the driver description matches to the model name\n" @@ -1879,8 +1816,7 @@ "and feel free to play around and modify the settings\n" "to what you know what works best for your printer.<br>\n" "If no driver description matches to the autodetected model name,\n" -"it does not necessarily mean that there is no driver available for the " -"model.\n" +"it does not necessarily mean that there is no driver available for the model.\n" "Often only the model name in the driver descriptions\n" "is different from the autodetected model name.\n" "Therefore you can enter whatever you like as driver search string\n" @@ -1910,8 +1846,7 @@ "기본적으로 표시됩니다.<br>\n" "드라이버 설명이 자동 검색된 모델 이름과 일치하고\n" "드라이버 설명과 일치하는 모든 드라이버가 동일한 모델에 속하는 경우\n" -"가장 적합한 드라이버가 맨 위에 나열되고 이 드라이버가 자동으로 미리 선택되도" -"록\n" +"가장 적합한 드라이버가 맨 위에 나열되고 이 드라이버가 자동으로 미리 선택되도록\n" "드라이버 설명이 정렬됩니다.\n" "드라이버가 자동으로 미리 선택되지 않는 경우 적합한 드라이버를\n" "수동으로 찾아서 선택해야 합니다.<br>\n" @@ -1948,8 +1883,8 @@ "'편집/수정' 대화 상자의 모든 드라이버 옵션을 조정할 수 있습니다.\n" "</p>" -#. BasicAddDialog help 5/7: -#: src/include/printer/helps.rb:218 +#. BasicAddDialog help 5/7: +#: src/include/printer/helps.rb:218 msgid "" "<p>\n" "Application programs do not show the actual printer device\n" @@ -1965,8 +1900,8 @@ "있습니다. 다만 대기열 이름 첫 번째 문자는 영문자로 시작되어야 합니다.\n" "</p>" -#. BasicAddDialog help 6/7: -#: src/include/printer/helps.rb:227 +#. BasicAddDialog help 6/7: +#: src/include/printer/helps.rb:227 msgid "" "<p>\n" "One of the print queues may be set to be <b>used by default</b>.<br>\n" @@ -1983,8 +1918,7 @@ "</p>" msgstr "" "<p>\n" -"프린트 대기열 중 하나를 <b>기본적으로 사용</b>되도록 설정할 수 있습니다." -"<br>\n" +"프린트 대기열 중 하나를 <b>기본적으로 사용</b>되도록 설정할 수 있습니다.<br>\n" "사용자가 다른 프린트 대기열을 지정하지 않은 경우\n" "응용 프로그램에서 시스템 기본 프린트 대기열을 사용해야 합니다.\n" "그러나 '하나의 유일한' 기본 대기열은 없습니다.\n" @@ -1997,8 +1931,8 @@ "http://en.opensuse.org/SDB:Print_Settings_with_CUPS\n" "</p>" -#. BasicAddDialog help 7/7: -#: src/include/printer/helps.rb:243 +#. BasicAddDialog help 7/7: +#: src/include/printer/helps.rb:243 msgid "" "<p>\n" "An alternative way to set up HP devices is to <b>run hp-setup</b>.<br>\n" @@ -2030,8 +1964,8 @@ "http://en.opensuse.org/SDB:How_to_set-up_a_HP_printer\n" "</p>" -#. BasicModifyDialog help 1/4: -#: src/include/printer/helps.rb:261 +#. BasicModifyDialog help 1/4: +#: src/include/printer/helps.rb:261 msgid "" "<p>\n" "<b><big>Modify a Print Queue</big></b><br>\n" @@ -2043,12 +1977,11 @@ "대기열을 수정하려면 변경하려는 항목만 선택합니다.<br>\n" "</p>" -#. BasicModifyDialog help 2/4: -#: src/include/printer/helps.rb:268 +#. BasicModifyDialog help 2/4: +#: src/include/printer/helps.rb:268 msgid "" "<p>\n" -"The <b>connection</b> determines how data is sent to the printer device." -"<br>\n" +"The <b>connection</b> determines how data is sent to the printer device.<br>\n" "If a wrong connection is selected, no data can be sent to the device\n" "so that there cannot be any printout.<br>\n" "If a printer device is accessible via more than one connection type,\n" @@ -2056,10 +1989,8 @@ "In particular HP devices are often accessible both via the 'usb:/...'\n" "and the 'hp:/...' connection.\n" "The latter is provided by the HP driver package 'hplip'.\n" -"For plain printing, both kinds of connections should work, but for anything " -"else\n" -"(e.g. device status via 'hp-toolbox' or scanning with a HP all-in-one " -"device)\n" +"For plain printing, both kinds of connections should work, but for anything else\n" +"(e.g. device status via 'hp-toolbox' or scanning with a HP all-in-one device)\n" "the 'hp:/...' connection must be used.<br>\n" "When you exchange the currently used connection with another one,\n" "the input field for the driver search string is preset\n" @@ -2098,8 +2029,7 @@ "및 'hp:/...' 연결 둘 다를 통해 액세스할 수 있습니다.\n" "후자는 HP 드라이버 패키지 'hplip'에 의해 제공됩니다.\n" "일반 인쇄의 경우 두 종류의 연결이 모두 작동해야 하지만\n" -"그 외의 경우(예: 'hp-toolbox'를 통한 장치 상태 또는 HP all-in-one 장치를 사용" -"한 검색)\n" +"그 외의 경우(예: 'hp-toolbox'를 통한 장치 상태 또는 HP all-in-one 장치를 사용한 검색)\n" "'hp:/...' 연결을 사용해야 합니다.<br>\n" "현재 사용된 연결을 다른 연결로 교환하는 경우\n" "드라이버 검색 문자열에 대한 입력 필드가 새로 선택한 연결의\n" @@ -2108,8 +2038,7 @@ "기본적으로 표시됩니다.<br>\n" "드라이버 설명이 자동 검색된 모델 이름과 일치하고\n" "드라이버 설명과 일치하는 모든 드라이버가 동일한 모델에 속하는 경우\n" -"가장 적합한 드라이버가 맨 위에 나열되도록(여전히 현재 사용된 드라이버 아래에 " -"있음)\n" +"가장 적합한 드라이버가 맨 위에 나열되도록(여전히 현재 사용된 드라이버 아래에 있음)\n" "드라이버 설명이 정렬됩니다.\n" "반면, 이 드라이버가 반드시 특정 요구에 적합한 드라이버인\n" "것은 아닙니다.\n" @@ -2129,19 +2058,16 @@ "사용 가능한 모든 드라이버 설명을 검색할 수 있습니다.\n" "</p>\n" -#. BasicModifyDialog help 3/4: -#: src/include/printer/helps.rb:309 +#. BasicModifyDialog help 3/4: +#: src/include/printer/helps.rb:309 msgid "" "<p>\n" "The <b>driver</b> determines that the right data is produced for the\n" "specific printer model.<br>\n" "If a wrong driver is assigned, wrong data is sent to the printer\n" -"which results bad looking printout, chaotic printout, or no printout at all." -"<br>\n" -"You can either select another driver and modify its driver option settings " -"later\n" -"or keep the currently used driver and modify its driver option settings now." -"<br>\n" +"which results bad looking printout, chaotic printout, or no printout at all.<br>\n" +"You can either select another driver and modify its driver option settings later\n" +"or keep the currently used driver and modify its driver option settings now.<br>\n" "Some driver option settings must match to your particular printer.\n" "For example the default paper size setting of the driver\n" "must match to the paper which is actually loaded in your printer.<br>\n" @@ -2150,8 +2076,7 @@ "should work for the particular driver.\n" "Nevertheless it may happen that your particular printer fails to print\n" "with high resolution. For example when you have a laser printer\n" -"which has insufficient built-in memory to process high resolution pages." -"<br>\n" +"which has insufficient built-in memory to process high resolution pages.<br>\n" "When you exchange the currently used driver by another one,\n" "you must first apply this change to the print queue\n" "so that the new driver is used for the queue\n" @@ -2159,8 +2084,7 @@ "and then in a second step you can adjust all driver options\n" "by using this dialog again.<br>\n" "Initially the input field for the driver search string is preset\n" -"with the description of the currently used driver when the connection was " -"not changed.\n" +"with the description of the currently used driver when the connection was not changed.\n" "This results usually only one single driver which matches\n" "so that you would have to enter a less specific driver search string\n" "to get also other drivers or you use the 'Find More' button.\n" @@ -2175,8 +2099,7 @@ "잘못된 프린터가 할당된 경우 잘못된 데이터가 프린터로 전송되어\n" "잘못된 모양의 출력, 손상된 출력 또는 출력 안 됨 문제가 발생합니다.<br>\n" "다른 드라이버를 선택하고 나중에 드라이버 옵션 설정을 수정하거나\n" -"현재 사용된 드라이버를 유지하고 지금 드라이버 옵션 설정을 수정할 수 있습니다." -"<br>\n" +"현재 사용된 드라이버를 유지하고 지금 드라이버 옵션 설정을 수정할 수 있습니다.<br>\n" "일부 드라이버 옵션 설정은 특정 프린터와 일치해야 합니다.\n" "예를 들어 드라이버의 기본 용지 크기 설정은\n" "실제로 프린터에 로드된 용지와 일치해야 합니다.<br>\n" @@ -2185,8 +2108,7 @@ "특정 드라이브에서 작동해야 합니다.\n" "하지만 특정 프린터가 고해상도에서\n" "인쇄하지 못할 수도 있습니다. 예를 들어 기본 제공 메모리가\n" -"부족하여 고해상도 페이지를 처리할 수 없는 레이저 프린터가 있는 경우입니다." -"<br>\n" +"부족하여 고해상도 페이지를 처리할 수 없는 레이저 프린터가 있는 경우입니다.<br>\n" "현재 사용된 연결을 다른 연결로 교환하는 경우\n" "새 드라이버가 대기열에 사용되도록\n" "먼저 이 변경사항을 프린트 대기열에 적용해야 하며\n" @@ -2203,15 +2125,13 @@ "사용 가능한 모든 드라이버 설명을 검색할 수 있습니다.\n" "</p>" -#. BasicModifyDialog help 4/4: -#: src/include/printer/helps.rb:343 +#. BasicModifyDialog help 4/4: +#: src/include/printer/helps.rb:343 msgid "" "<p>\n" "In contrast to connection and driver where you must select the right one,\n" -"you are free to enter arbitrary strings for <b>description</b> and " -"<b>location</b>.\n" -"Application programs often show description and location in the print " -"dialog.\n" +"you are free to enter arbitrary strings for <b>description</b> and <b>location</b>.\n" +"Application programs often show description and location in the print dialog.\n" "To make sure that those strings look correct in any language\n" "which a particular user of a particular application program may use,\n" "it is safe when you use only plain ASCII text without\n" @@ -2226,8 +2146,7 @@ "<p>\n" "연결과 드라이버에 대해 해당하는 것을 선택해야 하는 것과 달리\n" "<b>설명</b>과 <b>위치</b>에는 임의 문자열을 자유롭게 입력할 수 있습니다.\n" -"응용 프로그램에 따라서는 인쇄 대화 상자에 설명이나 위치를 보여주는 경우가 있" -"습니다.\n" +"응용 프로그램에 따라서는 인쇄 대화 상자에 설명이나 위치를 보여주는 경우가 있습니다.\n" "문자는 여러 가지 응용 프로그램의 언어 환경에서 표시할 수 있도록\n" "특별한 문자를 사용하지 않는 ASCII 문자(영문 대문자/소문자)\n" "ASCII 숫자(0-9), ASCII 공백(20 hex/스페이스) 같은 것을\n" @@ -2239,8 +2158,8 @@ "(예: '123 방' 또는 '책상 위').\n" "</p>" -#. DriverOptionsDialog help 1/3: -#: src/include/printer/helps.rb:361 +#. DriverOptionsDialog help 1/3: +#: src/include/printer/helps.rb:361 msgid "" "<p>\n" "<b><big>Set Driver Options</big></b><br>\n" @@ -2264,8 +2183,8 @@ "프린터에서 기본적으로 실제 사용되는 값으로 설정해야 합니다.\n" "</p>\n" -#. DriverOptionsDialog help 2/3: -#: src/include/printer/helps.rb:374 +#. DriverOptionsDialog help 2/3: +#: src/include/printer/helps.rb:374 msgid "" "<p>\n" "Non-default settings may not work in all cases or have unexpected\n" @@ -2285,8 +2204,8 @@ "또는 고품질 설정은 잉크젯 프린터에서 너무 느리게 인쇄될 수 있습니다.\n" "</p>\n" -#. DriverOptionsDialog help 3/3: -#: src/include/printer/helps.rb:385 +#. DriverOptionsDialog help 3/3: +#: src/include/printer/helps.rb:385 msgid "" "<p>\n" "In certain cases printer-specific driver settings\n" @@ -2308,8 +2227,8 @@ "그렇지 않으면 드라이버에서 양면 인쇄 옵션 설정을 무시할 수 있습니다.\n" "</p>\n" -#. AddDriverDialog help 1/2: -#: src/include/printer/helps.rb:398 +#. AddDriverDialog help 1/2: +#: src/include/printer/helps.rb:398 msgid "" "<p>\n" "<b><big>Add or Remove Printer Driver Packages</big></b><br>\n" @@ -2331,8 +2250,8 @@ "없는지 확인하십시오.<br>\n" "</p>\n" -#. AddDriverDialog help 2/2: -#: src/include/printer/helps.rb:410 +#. AddDriverDialog help 2/2: +#: src/include/printer/helps.rb:410 msgid "" "<p>\n" "<b><big>Add a Printer Description File</big></b><br>\n" @@ -2390,13 +2309,12 @@ "참조하므로 PPD 파일만으로 충분합니다.<br>\n" "</p>\n" -#. ConnectionWizardDialog help 1/7: -#: src/include/printer/helps.rb:441 +#. ConnectionWizardDialog help 1/7: +#: src/include/printer/helps.rb:441 msgid "" "<p>\n" "<b><big>Specify the Connection</big></b><br>\n" -"The <b>connection</b> determines how data is sent to the printer device." -"<br>\n" +"The <b>connection</b> determines how data is sent to the printer device.<br>\n" "If a wrong connection is used, no data can be sent to the device\n" "so that there cannot be any printout.\n" "</p>\n" @@ -2408,30 +2326,25 @@ "출력이 있을 수 없습니다.\n" "</p>\n" -#. ConnectionWizardDialog help 2/7: -#: src/include/printer/helps.rb:450 +#. ConnectionWizardDialog help 2/7: +#: src/include/printer/helps.rb:450 msgid "" "<p>\n" "<b><big>Printer Device URI</big></b><br>\n" "A connection is specified as so called <b>device URI</b>.<br>\n" -"Its first word (the so called URI scheme) specifies the kind of data-" -"transfer,\n" +"Its first word (the so called URI scheme) specifies the kind of data-transfer,\n" "for example 'usb', 'socket', 'lpd', or 'ipp'.<br>\n" "After the scheme there are more or less additional components\n" "which specify the details for this kind of data-transfer.<br>\n" "Space characters are not allowed in an URI.\n" "Therefore a space character in a value of an URI component\n" -"is encoded as '%20' (20 is the hexadecimal value of the space character)." -"<br>\n" +"is encoded as '%20' (20 is the hexadecimal value of the space character).<br>\n" "The components of an URI are separated by special reserved characters like\n" -"colon ':', slash '/', question mark '?', ampersand '&', or equals sign " -"'='.<br>\n" -"Finally there could be optional parameters (separated by a question mark " -"'?')\n" +"colon ':', slash '/', question mark '?', ampersand '&', or equals sign '='.<br>\n" +"Finally there could be optional parameters (separated by a question mark '?')\n" "of the form 'option1=value1&option2=value2&option3=value3' so that\n" "a full device URI could be for example:<br>\n" -"ipp://server.domain:631/printers/queuename?waitjob=false&" -"waitprinter=false<br>\n" +"ipp://server.domain:631/printers/queuename?waitjob=false&waitprinter=false<br>\n" "Some examples:<br>\n" "A USB printer model 'Fun Printer 1000+' made by 'ACME'\n" "with serial number 'A1B2C3' may have a device URI like:<br>\n" @@ -2456,13 +2369,11 @@ "따라서 URI 구성 요소의 공백 문자는\n" "'%20'으로 인코딩됩니다(20은 공백의 16진수 값).<br>\n" "URI의 구성 요소는\n" -"콜론(:), 슬래시(/), 물음표(?), 앰퍼샌드(&) 또는 등호(=)와 같은 특수 예약 문자" -"로 구분됩니다.<br>\n" +"콜론(:), 슬래시(/), 물음표(?), 앰퍼샌드(&) 또는 등호(=)와 같은 특수 예약 문자로 구분됩니다.<br>\n" "마지막으로 물음표(?)로 구분된 선택적 파라미터(\n" "('option1=value1&option2=value2&option3=value3' 형식)가 있어\n" "전체 장치 URI는 다음과 같은 형태를 갖게 됩니다.<br>\n" -"ipp://server.domain:631/printers/queuename?waitjob=false&" -"waitprinter=false<br>\n" +"ipp://server.domain:631/printers/queuename?waitjob=false&waitprinter=false<br>\n" "예:<br>\n" "일련번호가 'A1B2C3'인 'Fun Printer 1000+'라는 'ACME'의 USB 프린터 모델은\n" "다음과 같은 URI를 갖습니다.<br>\n" @@ -2471,14 +2382,13 @@ " 다음과 같은 장치 URI를 갖습니다.<br>\n" "socket://192.168.100.1:9100<br>\n" "IP가 192.168.100.2이고\n" -"원격 LPD 대기 이름 'LPT1'로 LPD 프로토콜을 통해 액세스할 수 있는 네트워크 프" -"린터는\n" +"원격 LPD 대기 이름 'LPT1'로 LPD 프로토콜을 통해 액세스할 수 있는 네트워크 프린터는\n" "다음과 같은 장치 URI를 갖습니다.<br>\n" "lpd://192.168.100.2/LPT1\n" "</p>" -#. ConnectionWizardDialog help 3/7: -#: src/include/printer/helps.rb:481 +#. ConnectionWizardDialog help 3/7: +#: src/include/printer/helps.rb:481 msgid "" "<p>\n" "<b><big>Percent Encoding</big></b><br>\n" @@ -2568,8 +2478,7 @@ "하이픈, 마침표, 물결표 및 대소문자 구분도\n" "경우에 따라 특수 문제를 발생시킬 수 있습니다\n" "(예: 문자, 숫자 및 밑줄만\n" -"CUPS 프린트 대기열 이름에 작동하는 것으로 알려져 있으며 여기서 대소문자는 중" -"요하지 않음).\n" +"CUPS 프린트 대기열 이름에 작동하는 것으로 알려져 있으며 여기서 대소문자는 중요하지 않음).\n" "따라서 가능하면 모든 URI의 모든 값에 소문자, 숫자 및\n" "밑줄만 사용하는 것이 좋습니다.<br>\n" "구성요소 값의 예약된 문자와 공백 문자는\n" @@ -2625,13 +2534,12 @@ "at 기호 @는 %40으로 퍼센트 인코드됨<br>\n" "왼쪽 대괄호 [는 %5B로 퍼센트 인코드됨<br>\n" "오른쪽 대괄호 ]는 %5D로 퍼센트 인코드됨<br>\n" -"자세한 내용은 다음 위치의 'URI(Uniform Resource Identifier): 일반 구문'을 참" -"조하십시오.<br>\n" +"자세한 내용은 다음 위치의 'URI(Uniform Resource Identifier): 일반 구문'을 참조하십시오.<br>\n" "http://tools.ietf.org/html/rfc3986\n" "</p>" -#. ConnectionWizardDialog help 4/7: -#: src/include/printer/helps.rb:557 +#. ConnectionWizardDialog help 4/7: +#: src/include/printer/helps.rb:557 msgid "" "<p>\n" "<b><big>Device URIs for Directly Connected Devices</big></b><br>\n" @@ -2645,12 +2553,11 @@ "자동으로 감지되며 적절한 장치 URI가 자동 생성됩니다.\n" "예:<br>\n" -#. ConnectionWizardDialog help 5/7: -#: src/include/printer/helps.rb:588 +#. ConnectionWizardDialog help 5/7: +#: src/include/printer/helps.rb:588 msgid "" "<p>\n" -"<b><big>Device URIs to Access a Network Printer or a Printserver Box</big><br>\n" +"<b><big>Device URIs to Access a Network Printer or a Printserver Box</big></b><br>\n" "A printserver box is a small device with a network connection\n" "and a USB or parallel port connection to connect the actual printer.\n" "A network printer has such a device built-in.\n" @@ -2687,8 +2594,7 @@ "</p>\n" msgstr "" "<p>\n" -"<b><big>네트워크 프린터 또는 프린트 서버 상자에 액세스하기 위한 장치 URI</b><br>\n" +"<b><big>네트워크 프린터 또는 프린트 서버 상자에 액세스하기 위한 장치 URI</big></b><br>\n" "프린트 서버 상자는 네트워크 연결과 실제 프린터를 연결할\n" "USB 또는 병렬 포트 연결이 있는 작은 장치입니다.\n" "네트워크 프린터에는 이러한 장치가 기본 제공되어 있습니다.\n" @@ -2714,8 +2620,7 @@ "<b>IPP(Internet Printing Protocol)</b><br>\n" "IPP는 실제 컴퓨터에서 실행되는 CUPS의 기본 프로토콜이지만\n" "IPP가 작은 프린트 서버 상자에 구현된 경우\n" -"대체로 올바로 구현되지 않습니다. 제조업체에서 실제로 공식 지원을 문서화한 경" -"우에만\n" +"대체로 올바로 구현되지 않습니다. 제조업체에서 실제로 공식 지원을 문서화한 경우에만\n" "IPP를 사용하십시오. \n" "일치하는 장치 URI는 다음과 같습니다.<br>\n" "ipp://ip-address:port-number/resource<br>\n" @@ -2725,8 +2630,8 @@ "http://www.cups.org/documentation.php/network.html\n" "</p>\n" -#. ConnectionWizardDialog help 6/7: -#: src/include/printer/helps.rb:627 +#. ConnectionWizardDialog help 6/7: +#: src/include/printer/helps.rb:627 msgid "" "<p>\n" "<b><big>Device URIs to Print Via a Print Server Machine</big></b><br>\n" @@ -2736,8 +2641,7 @@ "Ask your network administrator what which print server machine\n" "provides in your particular network:<br>\n" "<b>Windows (R) or Samba (SMB/CIFS)</b><br>\n" -"To access a SMB printer share, the RPM package samba-client must be " -"installed.\n" +"To access a SMB printer share, the RPM package samba-client must be installed.\n" "The package provides the CUPS backend 'smb' which is a link to\n" "the <tt>/usr/bin/smbspool</tt> program which actually sends the data\n" "to a SMB printer share.<br>\n" @@ -2780,8 +2684,7 @@ "the following device URI to access a 'Fun Printer 1000+' share:<br>\n" "smb://John%20Doe:%40home%21@MYGROUP/homeserver/Fun%20Printer%201000%2B<br>\n" "For <b>more information</b> have a look at <tt>man smbspool</tt> and<br>\n" -"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)" -"_Share_or_Windows_Share<br>\n" +"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share<br>\n" "'Windows' and 'Active Directory' are registered trademarks\n" "of Microsoft Corporation in the United States and/or other countries.<br>\n" "<b>Traditional UNIX Server (LPR)</b><br>\n" @@ -2815,8 +2718,7 @@ "CUPS 백 엔드 'smb'를 제공합니다.<br>\n" "액세스하려면 서버 이름과 프린터 공유 이름 및\n" "선택적으로 작업 그룹 이름이 필요합니다.\n" -"또한 액세스 권한을 얻기 위해 사용자 이름 및 비밀번호가 필요할 수도 있습니" -"다.\n" +"또한 액세스 권한을 얻기 위해 사용자 이름 및 비밀번호가 필요할 수도 있습니다.\n" "이러한 값의 공백과 특수 문자는\n" "퍼센트 인코드되어야 합니다(위 참조).<br>\n" "기본적으로 CUPS는 백 엔드(여기서는 smbspool)를 사용자 'lp'로 실행합니다.\n" @@ -2853,8 +2755,7 @@ "장치 URI를 사용하여 'Fun Printer 1000+' 공유에 액세스할 수 있습니다.<br>\n" "smb://John%20Doe:%40home%21@MYGROUP/homeserver/Fun%20Printer%201000%2B<br>\n" "<b>자세한 정보:</b> <tt>man smbspool</tt> 및<br>\n" -"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)" -"_Share_or_Windows_Share<br>\n" +"http://en.opensuse.org/SDB:Printing_via_SMB_(Samba)_Share_or_Windows_Share<br>\n" "'Windows' 및 'Active Directory'는 미국 및/또는 기타 국가에서\n" "Microsoft Corporation의 등록 상표입니다.<br>\n" "<b>기존 UNIX 서버(LPR)</b><br>\n" @@ -2874,8 +2775,8 @@ "일치하는 장치 URI:<br>\n" "ipp://ip-address:631/printers/queue<br>\n" -#. ConnectionWizardDialog help 7/7: -#: src/include/printer/helps.rb:714 +#. ConnectionWizardDialog help 7/7: +#: src/include/printer/helps.rb:714 msgid "" "<p>\n" "<b><big>Special Device URIs</big></b><br>\n" @@ -2908,12 +2809,10 @@ "The last parameter is the original URI, which the queue had before.<br>\n" "Example:<br>\n" "beh:/1/3/5/socket://ip-address:port-number<br>\n" -"The beh backend tries to access a network printer 3 times with 5 second " -"delay\n" +"The beh backend tries to access a network printer 3 times with 5 second delay\n" "between the attempts. If access still fails, the queue is not disabled\n" "and the print job is lost.<br>\n" -"For <b>more information</b> have a look at <tt>/usr/lib[64]/cups/backend/" -"beh</tt> and<br>\n" +"For <b>more information</b> have a look at <tt>/usr/lib[64]/cups/backend/beh</tt> and<br>\n" "http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler\n" "</p>" msgstr "" @@ -2955,13 +2854,12 @@ "http://www.linuxfoundation.org/en/OpenPrinting/Database/BackendErrorHandler\n" "</p>" -#. PrintingViaNetworkDialog help 1/4: -#: src/include/printer/helps.rb:755 +#. PrintingViaNetworkDialog help 1/4: +#: src/include/printer/helps.rb:755 msgid "" "<p>\n" "<b><big>Printing Via Network</big></b><br>\n" -"Usually CUPS (Common Unix Printing System) is used to print via network." -"<br>\n" +"Usually CUPS (Common Unix Printing System) is used to print via network.<br>\n" "By default CUPS uses its so called 'Browsing' mode\n" "to make printers available via network.<br>\n" "In this case remote CUPS servers must publish their printers via network\n" @@ -2996,14 +2894,12 @@ msgstr "" "<p>\n" "<b><big>네트워크를 통해 인쇄</big></b><br>\n" -"일반적으로 CUPS(Common Unix Printing System)를 사용하여 네트워크를 통해 인쇄" -"합니다.<br>\n" +"일반적으로 CUPS(Common Unix Printing System)를 사용하여 네트워크를 통해 인쇄합니다.<br>\n" "기본적으로 CUPS는 소위 '검색' 모드를\n" "사용하여 네트워크를 통해 프린터를 사용할 수 있게 합니다.<br>\n" "이 경우 원격 CUPS 서버는 네트워크를 통해 프린터를 게시해야 하며\n" "그에 따라 호스트에서 게시된 프린터에 대해\n" -"들어오는 정보를 수신 대기하는 CUPS 데몬 프로세스(cupsd)가 실행되어야 합니다." -"<br>\n" +"들어오는 정보를 수신 대기하는 CUPS 데몬 프로세스(cupsd)가 실행되어야 합니다.<br>\n" "CUPS 검색 정보는 UDP 포트 631을 통해 수신됩니다.<br>\n" "방화벽 관련:<br>\n" "프린터가 네트워크를 통해 게시되는 네트워크 영역에 대해\n" @@ -3031,8 +2927,8 @@ "http://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings\n" "</p>" -#. PrintingViaNetworkDialog help 2/4: -#: src/include/printer/helps.rb:792 +#. PrintingViaNetworkDialog help 2/4: +#: src/include/printer/helps.rb:792 msgid "" "<p>\n" "If you can access remote CUPS servers for printing\n" @@ -3060,15 +2956,13 @@ "프린터 정보를 폴링합니다.\n" "</p>" -#. PrintingViaNetworkDialog help 3/4: -#: src/include/printer/helps.rb:807 +#. PrintingViaNetworkDialog help 3/4: +#: src/include/printer/helps.rb:807 msgid "" "<p>\n" "If you print only via network and if you use only one single CUPS server,\n" -"there is no need to use CUPS Browsing and have a CUPS daemon running on your " -"host.\n" -"Instead it is simpler to specify the CUPS server and access it directly." -"<br>\n" +"there is no need to use CUPS Browsing and have a CUPS daemon running on your host.\n" +"Instead it is simpler to specify the CUPS server and access it directly.<br>\n" "A possible drawback is that application programs may be delayed\n" "for some time (until a timeout happens) when they try\n" "to access the CUPS server but it is actually not available\n" @@ -3089,8 +2983,8 @@ "CUPS 서버 항목을 하드코딩하면 도움이 될 수도 있습니다.\n" "</p>" -#. PrintingViaNetworkDialog help 4/4: -#: src/include/printer/helps.rb:821 +#. PrintingViaNetworkDialog help 4/4: +#: src/include/printer/helps.rb:821 msgid "" "<p>\n" "You have to set up an appropriate print queue on your host\n" @@ -3114,16 +3008,15 @@ "Microsoft Corporation의 등록 상표입니다.\n" "</p>" -#. SharingDialog help 1/4: -#: src/include/printer/helps.rb:835 +#. SharingDialog help 1/4: +#: src/include/printer/helps.rb:835 msgid "" "<p>\n" "<b><big>Sharing Print Queues and Publish Them Via Network</big></b><br>\n" "Usually CUPS (Common Unix Printing System) should be set up to use\n" "its so called 'Browsing' mode to make printers available via network.<br>\n" "In this case CUPS servers publish their local print queues via network\n" -"and accordingly on CUPS client systems the CUPS daemon process (cupsd) must " -"run\n" +"and accordingly on CUPS client systems the CUPS daemon process (cupsd) must run\n" "which is listening for incoming information about published printers.<br>\n" "CUPS Browsing information is received via UDP port 631.\n" "</p>" @@ -3134,27 +3027,23 @@ "사용하려면 CUPS(Common Unix Printing System)를 설정해야 합니다.<br>\n" "이 경우 CUPS 서버는 네트워크를 통해 로컬 프린트 대기열을 게시하며\n" "그에 따라 CUPS 클라이언트 시스템에서 게시된 프린터에 대해\n" -"들어오는 정보를 수신 대기하는 CUPS 데몬 프로세스(cupsd)가 실행되어야 합니다." -"<br>\n" +"들어오는 정보를 수신 대기하는 CUPS 데몬 프로세스(cupsd)가 실행되어야 합니다.<br>\n" "CUPS 검색 정보는 UDP 포트 631을 통해 수신됩니다.\n" "</p>" -#. SharingDialog help 2/4: -#: src/include/printer/helps.rb:847 +#. SharingDialog help 2/4: +#: src/include/printer/helps.rb:847 msgid "" "<p>\n" "First of all CUPS client systems must be allowed to access the CUPS server.\n" -"Then specify whether or not printers should be published to the clients." -"<br>\n" +"Then specify whether or not printers should be published to the clients.<br>\n" "In a local network the usual way to set up CUPS Browsing is\n" "to allow remote access for all hosts in the local network\n" "and to publish printers to all those hosts.<br>\n" "It is not required to publish printers in any case.<br>\n" -"If you have only one single CUPS server, there is no need to use CUPS " -"Browsing.\n" +"If you have only one single CUPS server, there is no need to use CUPS Browsing.\n" "Instead it is simpler to specify the CUPS server on the client systems\n" -"(via 'Printing Via Network') so that the clients access the server " -"directly.\n" +"(via 'Printing Via Network') so that the clients access the server directly.\n" "</p>" msgstr "" "<p>\n" @@ -3169,8 +3058,8 @@ "사용하여 클라이언트 시스템에서 CUPS 서버를 지정하는 것이 더 간단합니다.\n" "</p>" -#. SharingDialog help 3/4: -#: src/include/printer/helps.rb:861 +#. SharingDialog help 3/4: +#: src/include/printer/helps.rb:861 msgid "" "<p>\n" "There are various ways which can coexist how to specify\n" @@ -3204,8 +3093,8 @@ "명시적 목록을 지정할 수 있습니다.\n" "</p>" -#. SharingDialog help 4/4: -#: src/include/printer/helps.rb:879 +#. SharingDialog help 4/4: +#: src/include/printer/helps.rb:879 msgid "" "<p>\n" "Regarding firewall:<br>\n" @@ -3246,8 +3135,7 @@ "보호하는 데 사용됩니다.<br>\n" "네트워크를 통한 인쇄는 신뢰된 내부 네트워크에서 발생하며\n" "(아무도 외부 네트워크의 임의 사용자가 프린터에서 인쇄하도록 허용하지 않음),\n" -"일반적으로 사용자가 용지에 출력하려면 물리적 프린터 액세스 권한이 필요합니다." -"<br>\n" +"일반적으로 사용자가 용지에 출력하려면 물리적 프린터 액세스 권한이 필요합니다.<br>\n" "기본적으로 SuSEfirewall에서는 '인터넷 영역'에 속하는 네트워크\n" "인터페이스를 통해 모든 네트워크 트래픽이 전달할 수 있습니다.\n" "이 영역이 기본적으로 신뢰되기 때문입니다.<br>\n" @@ -3270,8 +3158,8 @@ "http://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings\n" "</p>" -#. Policies help 1/2: -#: src/include/printer/helps.rb:914 +#. Policies help 1/2: +#: src/include/printer/helps.rb:914 msgid "" "<p>\n" "<b><big>CUPS Operation Policy</big></b><br>\n" @@ -3289,8 +3177,8 @@ "'인쇄 활성화 또는 비활성화' 등입니다.\n" "</p>" -#. Policies help 2/2: -#: src/include/printer/helps.rb:924 +#. Policies help 2/2: +#: src/include/printer/helps.rb:924 msgid "" "<p>\n" "<b><big>CUPS Error Policy</big></b><br>\n" @@ -3310,16 +3198,14 @@ "<br>\n" "The following error policies exist:<br>\n" "Stop the printer and keep the job for future printing.<br>\n" -"Re-send the job from the beginning after waiting some time (30 seconds by " -"default).<br>\n" +"Re-send the job from the beginning after waiting some time (30 seconds by default).<br>\n" "Abort and delete the job and proceed with the next job.\n" "</p>" msgstr "" "<p>\n" "<b><big>CUPS 오류 정책</big></b><br>\n" "오류 정책은\n" -"CUPS가 프린터 장치로 인쇄 작업을 보내지 못했을 때 사용되는 기본 정책을 정의합" -"니다.<br>\n" +"CUPS가 프린터 장치로 인쇄 작업을 보내지 못했을 때 사용되는 기본 정책을 정의합니다.<br>\n" "특정한 프린터 연결 방식\n" "(예: 'usb', 'socket', 'lpd' 또는 'ipp')에 따라,\n" "그리고 실제 오류의 종류에 따라,\n" @@ -3338,8 +3224,8 @@ "작업을 취소하고 삭제한 후 다음 작업을 계속합니다.\n" "</p>" -#. Autoconfig help 1/2: -#: src/include/printer/helps.rb:949 +#. Autoconfig help 1/2: +#: src/include/printer/helps.rb:949 msgid "" "<p>\n" "<b><big>Automatic Configuration for Local Connected Printers</big></b><br>\n" @@ -3371,8 +3257,8 @@ "동일합니다.\n" "</p>" -#. Autoconfig help 2/2: -#: src/include/printer/helps.rb:966 +#. Autoconfig help 2/2: +#: src/include/printer/helps.rb:966 msgid "" "<p>\n" "<b><big>Automatic Configuration for USB Printers</big></b><br>\n" @@ -3405,115 +3291,112 @@ "항목을 통해 자동 USB 프린터 구성이 발생합니다.\n" "이 파일은 USB 프린터가 연결된 경우\n" "'udev-configure-printer add'를 실행하고\n" -"연결 해제된 경우 'udev-configure-printer remove'를 실행하기 위해 트리거됩니" -"다.\n" +"연결 해제된 경우 'udev-configure-printer remove'를 실행하기 위해 트리거됩니다.\n" "수동으로 70-printers.rules 파일을 변경하는 경우를 제외하고\n" "udev-configure-printer에 대해 조정 가능한 설정은 없습니다.\n" "</p>" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/printer/overview.ycp -#. Package: Configuration of printer -#. Summary: Overview dialog definition -#. Authors: Johannes Meixner -#. -#. $Id: overview.ycp 29363 2006-03-24 08:20:43Z mzugec $ -#: src/include/printer/overview.rb:49 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/printer/overview.ycp +#. Package: Configuration of printer +#. Summary: Overview dialog definition +#. Authors: Johannes Meixner +#. +#. $Id: overview.ycp 29363 2006-03-24 08:20:43Z mzugec $ +#: src/include/printer/overview.rb:49 msgid "Show" msgstr "표시" -#. CheckBox to select local print queues to be listed: -#: src/include/printer/overview.rb:55 +#. CheckBox to select local print queues to be listed: +#: src/include/printer/overview.rb:55 msgid "&Local" msgstr "로컬(&L)" -#. CheckBox to select remote print queues to be listed: -#: src/include/printer/overview.rb:62 +#. CheckBox to select remote print queues to be listed: +#: src/include/printer/overview.rb:62 msgid "&Remote" msgstr "원격(&R)" -#. Where the queue configuration exists (local or remote): -#: src/include/printer/overview.rb:83 +#. Where the queue configuration exists (local or remote): +#: src/include/printer/overview.rb:83 msgid "Configuration" msgstr "구성" -#. Header of a Table column with a list of print queues. -#. Print queue name: -#: src/include/printer/overview.rb:86 +#. Header of a Table column with a list of print queues. +#. Print queue name: +#: src/include/printer/overview.rb:86 msgid "Name" msgstr "이름" -#. Header of a Table column with a list of print queues. -#. Location of the printer (e.g. second floor, room 2.3): -#: src/include/printer/overview.rb:92 +#. Header of a Table column with a list of print queues. +#. Location of the printer (e.g. second floor, room 2.3): +#: src/include/printer/overview.rb:92 msgid "Location" msgstr "위치" -#. Header of a Table column with a list of print queues. -#. Whether or not is is the default queue: -#: src/include/printer/overview.rb:95 +#. Header of a Table column with a list of print queues. +#. Whether or not is is the default queue: +#: src/include/printer/overview.rb:95 msgid "Default" msgstr "기본값" -#. Header of a Table column with a list of print queues. -#. Queue status (accepting/rejecting and enabled/disabled): -#: src/include/printer/overview.rb:98 +#. Header of a Table column with a list of print queues. +#. Queue status (accepting/rejecting and enabled/disabled): +#: src/include/printer/overview.rb:98 msgid "Status" msgstr "상태" -#. PushButton label to refresh the list of print queues: -#: src/include/printer/overview.rb:110 +#. PushButton label to refresh the list of print queues: +#: src/include/printer/overview.rb:110 msgid "Re&fresh List" msgstr "목록 새로 고침(&F)" -#. PushButton label to print a test page: -#: src/include/printer/overview.rb:115 +#. PushButton label to print a test page: +#: src/include/printer/overview.rb:115 msgid "Print &Test Page" msgstr "테스트 페이지 인쇄(&T)" -#. Message of a Popup::ErrorDetails -#. when a local cupsd is required but it is not accessible. -#. YaST did already run 'lpstat -h localhost -r' -#. to check whether or not a local cupsd is accessible. -#. The command is shown here to the user (even if it is a bit technical) -#. to have him informed what goes on here and what he can do on his own. -#: src/include/printer/overview.rb:131 +#. Message of a Popup::ErrorDetails +#. when a local cupsd is required but it is not accessible. +#. YaST did already run 'lpstat -h localhost -r' +#. to check whether or not a local cupsd is accessible. +#. The command is shown here to the user (even if it is a bit technical) +#. to have him informed what goes on here and what he can do on his own. +#: src/include/printer/overview.rb:131 msgid "" -"A locally running CUPS daemon is required, but it seems to be not " -"accessible.\n" +"A locally running CUPS daemon is required, but it seems to be not accessible.\n" "Check with 'lpstat -h localhost -r' whether a local cupsd is accessible.\n" "A non-accessible cupsd leads to an endless sequence of further failures.\n" msgstr "" "로컬에서 실행 중인 CUPS 데몬이 필요하지만 액세스할 수 없는 것 같습니다.\n" -"'lpstat -h localhost -r'을 사용하여 로컬 cupsd에 액세스할 수 있는지 확인하십" -"시오.\n" +"'lpstat -h localhost -r'을 사용하여 로컬 cupsd에 액세스할 수 있는지 확인하십시오.\n" "cupsd에 액세스할 수 없으면 실패가 끝없이 반복됩니다.\n" -#. Message of a Popup::ErrorDetails -#. when the local cupsd does not use the official IPP port (631). -#. A rather technical text because this does not happen on normal systems -#. By default the cupsd uses the official IPP port (631). -#. If not, the user must have intentionally and manually changed -#. the port setting for the cupsd in /etc/cups/cupsd.conf -#: src/include/printer/overview.rb:143 +#. Message of a Popup::ErrorDetails +#. when the local cupsd does not use the official IPP port (631). +#. A rather technical text because this does not happen on normal systems +#. By default the cupsd uses the official IPP port (631). +#. If not, the user must have intentionally and manually changed +#. the port setting for the cupsd in /etc/cups/cupsd.conf +#: src/include/printer/overview.rb:143 msgid "" "The CUPS daemon seems not to listen on the official IANA IPP port (631).\n" "Check with 'netstat -nap | grep cupsd' where the cupsd actually listens.\n" @@ -3526,20 +3409,18 @@ "the YaST printer module to configure your printers.\n" msgstr "" "CUPS 데몬이 공식 IANA IPP 포트(631)에서 수신 대기하지 않는 것 같습니다.\n" -"'netstat -nap | grep cupsd'를 사용하여 cupsd가 실제로 수신 대기하는 위치를 확" -"인하십시오.\n" +"'netstat -nap | grep cupsd'를 사용하여 cupsd가 실제로 수신 대기하는 위치를 확인하십시오.\n" "이 문제는 'Listen ...:1234' 또는 'Port 1234' 설정\n" "(여기서 1234는 공식 포트 631이 아닌 모든 포트 번호를 의미함)이\n" -"/etc/cups/cupsd.conf에 있는 경우에 발생합니다('BrowsePort 1234'가 있는지도 확" -"인).\n" +"/etc/cups/cupsd.conf에 있는 경우에 발생합니다('BrowsePort 1234'가 있는지도 확인).\n" "YaST 프린터 모듈은 비공식 포트를 지원하지 않습니다.\n" "비공식 포트를 사용하면 실패가 끝없이 반복됩니다.\n" "비공식 포트를 사용해야 하는 경우\n" "YaST 프린터 모듈을 사용하여 프린터를 구성할 수 없습니다.\n" -#. Busy message: -#. Body of a Popup::ShowFeedback -#: src/include/printer/overview.rb:185 +#. Busy message: +#. Body of a Popup::ShowFeedback +#: src/include/printer/overview.rb:185 msgid "" "Running several tests regarding CUPS server accessibility...\n" "(this might take some time)" @@ -3547,584 +3428,567 @@ "CUPS 서버 액세스 가능성과 관련된 여러 테스트를 실행하는 중입니다.\n" "(시간이 걸릴 수 있음)" -#. where %1 will be replaced by the server name: -#: src/include/printer/overview.rb:204 +#. where %1 will be replaced by the server name: +#: src/include/printer/overview.rb:204 msgid "Do no longer use the inaccessible CUPS server '%1'?" msgstr "액세스할 수 없는 CUPS 서버 '%1'을(를) 더 이상 사용하지 않으시겠습니까?" -#. Popup::YesNoHeadline body recommendation how to answer the headline question -#. where %1 will be replaced by the server name: -#: src/include/printer/overview.rb:210 +#. Popup::YesNoHeadline body recommendation how to answer the headline question +#. where %1 will be replaced by the server name: +#: src/include/printer/overview.rb:210 msgid "To proceed, you should agree that '%1' will be no longer used." msgstr "계속하려면 '%1'이(가) 더 이상 사용되지 않는 것에 동의해야 합니다." -#. The 'ServerName' entry in /etc/cups/client.conf was removed -#. so that it is now no longer a real client-only config and -#. therefore the Printerlib::client_* values must be determined anew: -#: src/include/printer/overview.rb:226 src/include/printer/overview.rb:237 -msgid "" -"A non-accessible server leads to an endless sequence of delays and failures." +#. The 'ServerName' entry in /etc/cups/client.conf was removed +#. so that it is now no longer a real client-only config and +#. therefore the Printerlib::client_* values must be determined anew: +#: src/include/printer/overview.rb:226 src/include/printer/overview.rb:237 +msgid "A non-accessible server leads to an endless sequence of delays and failures." msgstr "서버에 액세스할 수 없으면 지연 및 실패가 끝없이 반복됩니다." -#. where %1 will be replaced by the CUPS server name. -#: src/include/printer/overview.rb:256 +#. where %1 will be replaced by the CUPS server name. +#: src/include/printer/overview.rb:256 msgid "CUPS Server %1" msgstr "CUPS 서버 %1" -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/include/printer/overview.rb:280 +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/include/printer/overview.rb:280 msgid "Testing if CUPS server is accessible..." msgstr "CUPS 서버에 액세스할 수 있는지 테스트하는 중입니다." -#. Body of a Popup::AnyMessage when no queue was selected from the list: -#. Body of a Popup::AnyMessage when no queue was selected from the list: -#. Body of a Popup::AnyMessage when no queue was selected from the list: -#: src/include/printer/overview.rb:595 src/include/printer/overview.rb:681 -#: src/include/printer/overview.rb:1155 +#. Body of a Popup::AnyMessage when no queue was selected from the list: +#. Body of a Popup::AnyMessage when no queue was selected from the list: +#. Body of a Popup::AnyMessage when no queue was selected from the list: +#: src/include/printer/overview.rb:595 src/include/printer/overview.rb:681 +#: src/include/printer/overview.rb:1155 msgid "Select an entry." msgstr "항목을 선택하십시오." -#: src/include/printer/overview.rb:608 +#: src/include/printer/overview.rb:608 msgid "Cannot Delete" msgstr "삭제할 수 없습니다." -#. Body of a Popup::AnyMessage when a remote queue was selected to be deleted: -#: src/include/printer/overview.rb:610 -msgid "" -"This is a remote configuration. Only local configurations can be deleted." +#. Body of a Popup::AnyMessage when a remote queue was selected to be deleted: +#: src/include/printer/overview.rb:610 +msgid "This is a remote configuration. Only local configurations can be deleted." msgstr "원격 구성입니다. 로컬 구성만 삭제할 수 있습니다." -#: src/include/printer/overview.rb:617 +#: src/include/printer/overview.rb:617 msgid "Confirm Deletion" msgstr "삭제 완료" -#. Body of a confirmation popup before a queue will be deleted: -#: src/include/printer/overview.rb:619 -msgid "" -"The selected configuration would be deleted immediately and cannot be " -"restored." +#. Body of a confirmation popup before a queue will be deleted: +#: src/include/printer/overview.rb:619 +msgid "The selected configuration would be deleted immediately and cannot be restored." msgstr "선택한 구성은 즉시 삭제되고 복원할 수 없습니다." -#. 'Yes' button label of a confirmation popup before a queue will be deleted: -#: src/include/printer/overview.rb:623 +#. 'Yes' button label of a confirmation popup before a queue will be deleted: +#: src/include/printer/overview.rb:623 msgid "Delete configuration %1" msgstr "구성 %1 삭제" -#. 'No' button label of a confirmation popup before a queue will be deleted: -#: src/include/printer/overview.rb:625 +#. 'No' button label of a confirmation popup before a queue will be deleted: +#: src/include/printer/overview.rb:625 msgid "Do not delete it" msgstr "삭제 안 함" -#. because a class cannot be re-created with the YaST printer module because -#. the YaST printer module has no support to add or edit classes -#. because classes are only useful in bigger printing environments -#. which is out of the scope of the use cases of the YaST printer module. -#. Nevertheless it is possible to delete a class with the YaST printer module -#. so that the user can get rid of a class which may have been created by accident -#. with whatever other setup tool: -#: src/include/printer/overview.rb:640 +#. because a class cannot be re-created with the YaST printer module because +#. the YaST printer module has no support to add or edit classes +#. because classes are only useful in bigger printing environments +#. which is out of the scope of the use cases of the YaST printer module. +#. Nevertheless it is possible to delete a class with the YaST printer module +#. so that the user can get rid of a class which may have been created by accident +#. with whatever other setup tool: +#: src/include/printer/overview.rb:640 msgid "Confirm Deletion of a Class" msgstr "클래스 삭제 확인" -#. Body of a confirmation popup before a class will be deleted: -#: src/include/printer/overview.rb:642 +#. Body of a confirmation popup before a class will be deleted: +#: src/include/printer/overview.rb:642 msgid "A deleted class cannot be re-created with this tool." msgstr "이 도구를 사용하여 삭제된 클래스를 다시 생성할 수 없습니다." -#: src/include/printer/overview.rb:688 +#: src/include/printer/overview.rb:688 msgid "Rejecting Print Jobs" msgstr "인쇄 작업 거부 중" -#. Body of a Popup::AnyMessage when the queue rejects print jobs: -#: src/include/printer/overview.rb:690 +#. Body of a Popup::AnyMessage when the queue rejects print jobs: +#: src/include/printer/overview.rb:690 msgid "The testpage cannot be printed because print jobs are rejected." msgstr "인쇄 작업이 거부되어 테스트 페이지를 인쇄할 수 없습니다." -#. Do a refresh of the overview content to be on the safe side. -#. Perhaps the actual current queue state is no longer "rejecting". -#. Re-run the OverviewDialog (with re-created queue status) via the sequencer: -#: src/include/printer/overview.rb:700 +#. Do a refresh of the overview content to be on the safe side. +#. Perhaps the actual current queue state is no longer "rejecting". +#. Re-run the OverviewDialog (with re-created queue status) via the sequencer: +#: src/include/printer/overview.rb:700 msgid "Printout Disabled" msgstr "출력 비활성화됨" -#. Body of a Popup::AnyMessage when printing is disabled for the queue: -#: src/include/printer/overview.rb:702 +#. Body of a Popup::AnyMessage when printing is disabled for the queue: +#: src/include/printer/overview.rb:702 msgid "The testpage cannot be printed because printout is disabled." msgstr "출력이 비활성화되어 테스트 페이지를 인쇄할 수 없습니다." -#. Test whether there are already pending jobs in a local queue. -#. If yes, the queue is usually currently actively printing because -#. the test above makes sure that the queue has printing enabled. -#. When this command fails for whatever reason, it is a safe fallback -#. to assume that there are no pending jobs in the queue: -#: src/include/printer/overview.rb:731 -msgid "" -"There are pending print jobs which might be deleted before the testpage is " -"printed." -msgstr "" -"테스트 페이지가 인쇄되기 전에 삭제해야 하는 대기 중인 인쇄 작업이 있습니다." +#. Test whether there are already pending jobs in a local queue. +#. If yes, the queue is usually currently actively printing because +#. the test above makes sure that the queue has printing enabled. +#. When this command fails for whatever reason, it is a safe fallback +#. to assume that there are no pending jobs in the queue: +#: src/include/printer/overview.rb:731 +msgid "There are pending print jobs which might be deleted before the testpage is printed." +msgstr "테스트 페이지가 인쇄되기 전에 삭제해야 하는 대기 중인 인쇄 작업이 있습니다." -#. where %1 will be replaced by the queue name. -#. where %1 will be replaced by the queue name. -#: src/include/printer/overview.rb:751 src/include/printer/overview.rb:920 +#. where %1 will be replaced by the queue name. +#. where %1 will be replaced by the queue name. +#: src/include/printer/overview.rb:751 src/include/printer/overview.rb:920 msgid "Delete Pending Print Jobs For %1" msgstr "%1에 대해 대기 중인 인쇄 작업 삭제" -#. 'Yes' button label of a confirmation popup -#. before all pending jobs in a queue will be deleted: -#: src/include/printer/overview.rb:759 +#. 'Yes' button label of a confirmation popup +#. before all pending jobs in a queue will be deleted: +#: src/include/printer/overview.rb:759 msgid "Delete them before printing testpage" msgstr "시험 인쇄를 시작하기 전에 대기 중인 작업 삭제" -#. 'No' button label of a confirmation popup -#. before all pending jobs in a queue will be deleted: -#: src/include/printer/overview.rb:762 +#. 'No' button label of a confirmation popup +#. before all pending jobs in a queue will be deleted: +#: src/include/printer/overview.rb:762 msgid "Print testpage after the other jobs" msgstr "다른 작업을 마친 후에 시험 인쇄" -#. where %1 will be replaced by the queue name. -#. Only a simple message because this error does not happen on a normal system. -#. where %1 will be replaced by the queue name. -#. Only a simple message because this error does not happen on a normal system. -#: src/include/printer/overview.rb:775 src/include/printer/overview.rb:944 +#. where %1 will be replaced by the queue name. +#. Only a simple message because this error does not happen on a normal system. +#. where %1 will be replaced by the queue name. +#. Only a simple message because this error does not happen on a normal system. +#: src/include/printer/overview.rb:775 src/include/printer/overview.rb:944 msgid "Failed to delete all pending jobs for %1." msgstr "%1에 대기 중인 일부 작업을 삭제하지 못했습니다." -#. Since CUPS 1.4 there is no longer a readymade PostScript testpage in CUPS, see -#. https://bugzilla.novell.com/show_bug.cgi?id=520617 -#. Therefore a slightly modified CUPS 1.3.10 testprint.ps was added -#. to yast2-printer as /usr/share/YaST2/data/testprint.ps -#. The following modifications -#. --- cups-1.3.10/data/testprint.ps 2009-01-13 18:27:16.000000000 +0100 -#. +++ data/testprint.ps 2009-07-09 15:25:26.000000000 +0200 -#. @@ -564 +564 @@ -#. - (Printer Test Page) CENTER % Show text centered -#. + (CUPS Printer Test Page) CENTER % Show text centered -#. @@ -570 +570 @@ -#. - (Printed with CUPS v1.3.x) show -#. + (Printed with CUPS) show -#. make it obvious that it is not a YaST testpage but a CUPS testpage -#. and it is now independent of the CUPS version. -#: src/include/printer/overview.rb:802 +#. Since CUPS 1.4 there is no longer a readymade PostScript testpage in CUPS, see +#. https://bugzilla.novell.com/show_bug.cgi?id=520617 +#. Therefore a slightly modified CUPS 1.3.10 testprint.ps was added +#. to yast2-printer as /usr/share/YaST2/data/testprint.ps +#. The following modifications +#. --- cups-1.3.10/data/testprint.ps 2009-01-13 18:27:16.000000000 +0100 +#. +++ data/testprint.ps 2009-07-09 15:25:26.000000000 +0200 +#. @@ -564 +564 @@ +#. - (Printer Test Page) CENTER % Show text centered +#. + (CUPS Printer Test Page) CENTER % Show text centered +#. @@ -570 +570 @@ +#. - (Printed with CUPS v1.3.x) show +#. + (Printed with CUPS) show +#. make it obvious that it is not a YaST testpage but a CUPS testpage +#. and it is now independent of the CUPS version. +#: src/include/printer/overview.rb:802 msgid "Test printout" msgstr "테스트 출력" -#. Popup::AnyQuestion message: -#: src/include/printer/overview.rb:804 +#. Popup::AnyQuestion message: +#: src/include/printer/overview.rb:804 msgid "Print one or two pages e.g. to test duplex printing" msgstr "한두 페이지를 인쇄하여 양면 인쇄 테스트" -#. Popup::AnyQuestion so called 'yes' (default) button label: -#: src/include/printer/overview.rb:806 +#. Popup::AnyQuestion so called 'yes' (default) button label: +#: src/include/printer/overview.rb:806 msgid "Single test page" msgstr "단일 테스트 페이지" -#. Popup::AnyQuestion so called 'no' button label: -#: src/include/printer/overview.rb:808 +#. Popup::AnyQuestion so called 'no' button label: +#: src/include/printer/overview.rb:808 msgid "Two test pages" msgstr "두 개의 테스트 페이지" -#. where %1 will be replaced by the queue name. -#. Only a simple message because this error does not happen on a normal system. -#: src/include/printer/overview.rb:838 +#. where %1 will be replaced by the queue name. +#. Only a simple message because this error does not happen on a normal system. +#: src/include/printer/overview.rb:838 msgid "Failed to print testpage for %1." msgstr "%1에 대한 테스트 페이지를 인쇄하지 못했습니다." -#. When submitting the testpage to the queue failed (also for non-local queues) -#. there might be whatever reason (e.g. a remote queue might have been deleted in the meantime) -#. so that a refresh of the overview content is needed to be on the safe side. -#. Re-run the OverviewDialog (with re-created queue status) via the sequencer: -#: src/include/printer/overview.rb:855 +#. When submitting the testpage to the queue failed (also for non-local queues) +#. there might be whatever reason (e.g. a remote queue might have been deleted in the meantime) +#. so that a refresh of the overview content is needed to be on the safe side. +#. Re-run the OverviewDialog (with re-created queue status) via the sequencer: +#: src/include/printer/overview.rb:855 msgid "Wait Until Testpage Printing Finished" msgstr "테스트 페이지 인쇄가 완료될 때까지 대기" -#. Popup::AnyQuestion message regarding testpage printout result -#. where %1 will be replaced by the queue name. -#: src/include/printer/overview.rb:859 +#. Popup::AnyQuestion message regarding testpage printout result +#. where %1 will be replaced by the queue name. +#: src/include/printer/overview.rb:859 msgid "Sent testpage to %1. Printing should start soon." msgstr "테스트 페이지를 %1(으)로 보냈습니다. 인쇄가 곧 시작됩니다." -#. Popup::AnyQuestion 'Yes' button label -#. regarding a positive testpage printout result: -#: src/include/printer/overview.rb:864 +#. Popup::AnyQuestion 'Yes' button label +#. regarding a positive testpage printout result: +#: src/include/printer/overview.rb:864 msgid "Testpage printout was successful" msgstr "테스트 페이지 출력 성공" -#. Popup::AnyQuestion 'No' button label -#. regarding a negative testpage printout result: -#: src/include/printer/overview.rb:867 +#. Popup::AnyQuestion 'No' button label +#. regarding a negative testpage printout result: +#: src/include/printer/overview.rb:867 msgid "Testpage printing failed" msgstr "테스트 페이지 인쇄 실패" -#. it seems something went wrong with the testpage printing -#. so that the user can delete all pending jobs now. -#. Via the "cancel" command the cupsd sends termination signals -#. to running filter processes for the queue so that the filters -#. (in particular the printer driver) could do whatever is needed -#. to switch an actively printing printer device into a clean state -#. (e.g. exit its graphics printing mode and switch back to normal mode). -#. The backend process terminates when the filters have finished. -#. This helps in usual cases (in particular when a good driver is used) -#. if something had messed up for an actively printing job but -#. unfortunately there is no option for the "cancel" command -#. which lets the cupsd kill the backend process as emergency brake -#. when something is really wrong e.g. a wrong driver lets the printer -#. spit out zillions of sheets with nonsense characters. -#. When this command fails for whatever reason, it is a safe fallback -#. to assume that there are no pending jobs in the queue: -#: src/include/printer/overview.rb:900 +#. it seems something went wrong with the testpage printing +#. so that the user can delete all pending jobs now. +#. Via the "cancel" command the cupsd sends termination signals +#. to running filter processes for the queue so that the filters +#. (in particular the printer driver) could do whatever is needed +#. to switch an actively printing printer device into a clean state +#. (e.g. exit its graphics printing mode and switch back to normal mode). +#. The backend process terminates when the filters have finished. +#. This helps in usual cases (in particular when a good driver is used) +#. if something had messed up for an actively printing job but +#. unfortunately there is no option for the "cancel" command +#. which lets the cupsd kill the backend process as emergency brake +#. when something is really wrong e.g. a wrong driver lets the printer +#. spit out zillions of sheets with nonsense characters. +#. When this command fails for whatever reason, it is a safe fallback +#. to assume that there are no pending jobs in the queue: +#: src/include/printer/overview.rb:900 msgid "There are pending print jobs which might be deleted now." msgstr "지금 삭제해야 하는 대기 중인 인쇄 작업이 있습니다." -#. 'Yes' button label of a confirmation popup -#. before all pending jobs in a queue will be deleted: -#: src/include/printer/overview.rb:928 +#. 'Yes' button label of a confirmation popup +#. before all pending jobs in a queue will be deleted: +#: src/include/printer/overview.rb:928 msgid "Delete all pending jobs" msgstr "모든 대기 중인 작업 삭제" -#. 'No' button label of a confirmation popup -#. before all pending jobs in a queue will be deleted: -#: src/include/printer/overview.rb:931 +#. 'No' button label of a confirmation popup +#. before all pending jobs in a queue will be deleted: +#: src/include/printer/overview.rb:931 msgid "Do not delete them" msgstr "삭제 안 함" -#. Ignore an effectively empty test_print_cups_error_log: -#: src/include/printer/overview.rb:1046 +#. Ignore an effectively empty test_print_cups_error_log: +#: src/include/printer/overview.rb:1046 msgid "For the full log, see the /var/log/cups/error_log file." msgstr "전체 로그를 보려면 /var/log/cups/error_log 파일을 참조하십시오." -#: src/include/printer/overview.rb:1051 -msgid "" -"CUPS log information while processing the testpage for %1 (English only)" +#: src/include/printer/overview.rb:1051 +msgid "CUPS log information while processing the testpage for %1 (English only)" msgstr "%1에 대한 테스트 페이지를 처리하는 중 CUPS 로그 정보(영어만)" -#. but the test_print_cups_error_log was effectively empty, -#. show a very generic info to the user to show at least something: -#: src/include/printer/overview.rb:1068 +#. but the test_print_cups_error_log was effectively empty, +#. show a very generic info to the user to show at least something: +#: src/include/printer/overview.rb:1068 msgid "For CUPS log information, see the /var/log/cups/error_log file." msgstr "CUPS 로그 정보를 보려면 /var/log/cups/error_log 파일을 참조하십시오." -#. show a very generic info to the user to show at least something: -#: src/include/printer/overview.rb:1078 -msgid "" -"When printing via a remote system fails, you may ask an admin of the remote " -"system." -msgstr "" -"원격 시스템을 통한 인쇄에 실패할 경우 원격 시스템의 관리자에게 문의할 수 있습" -"니다." +#. show a very generic info to the user to show at least something: +#: src/include/printer/overview.rb:1078 +msgid "When printing via a remote system fails, you may ask an admin of the remote system." +msgstr "원격 시스템을 통한 인쇄에 실패할 경우 원격 시스템의 관리자에게 문의할 수 있습니다." -#. PopupYesNoHeadline body: -#: src/include/printer/overview.rb:1105 +#. PopupYesNoHeadline body: +#: src/include/printer/overview.rb:1105 msgid "A remote CUPS server setting conflicts with adding a configuration." msgstr "원격 CUPS 서버 설정이 구성 추가 시 충돌합니다." -#: src/include/printer/overview.rb:1162 +#: src/include/printer/overview.rb:1162 msgid "Cannot Modify" msgstr "수정할 수 없습니다." -#. Body of a Popup::AnyMessage when a remote queue was selected to be modified: -#: src/include/printer/overview.rb:1164 -msgid "" -"This is a remote configuration. Only local configurations can be modified." +#. Body of a Popup::AnyMessage when a remote queue was selected to be modified: +#: src/include/printer/overview.rb:1164 +msgid "This is a remote configuration. Only local configurations can be modified." msgstr "원격 구성입니다. 로컬 구성만 수정할 수 있습니다." -#. An entry for a ComboBox from which the user can select that the CUPS error policy -#. which is used when it fails to send a job to the printer is to -#. stop the printer and keep the job for future printing: -#: src/include/printer/policies.rb:45 +#. An entry for a ComboBox from which the user can select that the CUPS error policy +#. which is used when it fails to send a job to the printer is to +#. stop the printer and keep the job for future printing: +#: src/include/printer/policies.rb:45 msgid "stop the printer and keep the job for future printing" msgstr "프린터를 중지하고 나중 인쇄를 위해 작업 보관" -#. An entry for a ComboBox from which the user can select that the CUPS error policy -#. which is used when it fails to send a job to the printer is to -#. re-send the job from the beginning after waiting some time -#. (the default JobRetryInterval is 30 seconds but this can be changed): -#: src/include/printer/policies.rb:52 +#. An entry for a ComboBox from which the user can select that the CUPS error policy +#. which is used when it fails to send a job to the printer is to +#. re-send the job from the beginning after waiting some time +#. (the default JobRetryInterval is 30 seconds but this can be changed): +#: src/include/printer/policies.rb:52 msgid "re-send the job after waiting some time" msgstr "일정 시간 대기한 후 작업 다시 보내기" -#. An entry for a ComboBox from which the user can select that the CUPS error policy -#. which is used when it fails to send a job to the printer is to -#. abort and delete the job and proceed with the next job: -#: src/include/printer/policies.rb:58 +#. An entry for a ComboBox from which the user can select that the CUPS error policy +#. which is used when it fails to send a job to the printer is to +#. abort and delete the job and proceed with the next job: +#: src/include/printer/policies.rb:58 msgid "abort and delete the job and proceed with the next job" msgstr "작업을 중단 후 삭제하고 다음 작업으로 진행" -#. Header for a ComboBox to specify the CUPS error policy: -#: src/include/printer/policies.rb:77 +#. Header for a ComboBox to specify the CUPS error policy: +#: src/include/printer/policies.rb:77 msgid "Specify the &error policy" msgstr "오류 정책 지정(&E)" -#. CheckBox to apply the CUPS error policy which is selected in the ComboBox above -#. to all local printer configurations (i.e. to all local print queues). -#. When possible we perefer to use the wording "printer configuration" -#. instead of "print queue" because the latter may sound too technical -#. but sometimes (e.g. in the Connection Wizard) we must use the exact technical term: -#: src/include/printer/policies.rb:93 +#. CheckBox to apply the CUPS error policy which is selected in the ComboBox above +#. to all local printer configurations (i.e. to all local print queues). +#. When possible we perefer to use the wording "printer configuration" +#. instead of "print queue" because the latter may sound too technical +#. but sometimes (e.g. in the Connection Wizard) we must use the exact technical term: +#: src/include/printer/policies.rb:93 msgid "&Apply this error policy to all local printer configurations" msgstr "이 오류 정책을 모든 로컬 프린터 구성에 적용(&A)" -#. Header for a ComboBox to specify the CUPS operation policy: -#: src/include/printer/policies.rb:101 +#. Header for a ComboBox to specify the CUPS operation policy: +#: src/include/printer/policies.rb:101 msgid "Specify the &operation policy" msgstr "작업 정책 지정(&O)" -#. CheckBox to apply the CUPS operation policy which is selected in the ComboBox above -#. to all local printer configurations (i.e. to all local print queues). -#. When possible we perefer to use the wording "printer configuration" -#. instead of "print queue" because the latter may sound too technical -#. but sometimes (e.g. in the Connection Wizard) we must use the exact technical term: -#: src/include/printer/policies.rb:113 +#. CheckBox to apply the CUPS operation policy which is selected in the ComboBox above +#. to all local printer configurations (i.e. to all local print queues). +#. When possible we perefer to use the wording "printer configuration" +#. instead of "print queue" because the latter may sound too technical +#. but sometimes (e.g. in the Connection Wizard) we must use the exact technical term: +#: src/include/printer/policies.rb:113 msgid "Apply this operation &policy to all local printer configurations" msgstr "이 작업 정책을 모든 로컬 프린터 구성에 적용(&P)" -#. PopupYesNoHeadline headline -#. PopupYesNoHeadline body: -#: src/include/printer/policies.rb:139 -msgid "" -"A remote CUPS server setting conflicts with setting policies for the local " -"system." +#. PopupYesNoHeadline headline +#. PopupYesNoHeadline body: +#: src/include/printer/policies.rb:139 +msgid "A remote CUPS server setting conflicts with setting policies for the local system." msgstr "원격 CUPS 서버 설정이 로컬 시스템의 설정 정책과 충돌합니다." -#. where %1 will be replaced by the print queue name. -#: src/include/printer/policies.rb:331 +#. where %1 will be replaced by the print queue name. +#: src/include/printer/policies.rb:331 msgid "Failed to apply the policy to '%1'" msgstr "'%1'에 정책을 적용하지 못했습니다." -#. where %1 will be replaced by the default operation policy value. -#. Do not change or translate "DefaultPolicy", it is a system settings name. -#: src/include/printer/policies.rb:354 +#. where %1 will be replaced by the default operation policy value. +#. Do not change or translate "DefaultPolicy", it is a system settings name. +#: src/include/printer/policies.rb:354 msgid "Failed to set 'DefaultPolicy %1' in /etc/cups/cupsd.conf" msgstr "/etc/cups/cupsd.conf에서 'DefaultPolicy %1'을(를) 설정하지 못했습니다." -#. where %1 will be replaced by the default error policy value. -#. Do not change or translate "ErrorPolicy", it is a system settings name. -#: src/include/printer/policies.rb:373 +#. where %1 will be replaced by the default error policy value. +#. Do not change or translate "ErrorPolicy", it is a system settings name. +#: src/include/printer/policies.rb:373 msgid "Failed to set 'ErrorPolicy %1' in /etc/cups/cupsd.conf" msgstr "/etc/cups/cupsd.conf에서 'ErrorPolicy %1'을(를) 설정하지 못했습니다." -#. There is only a "Cancel" functionality (via the "back" button) which goes back one step -#. and the button with the "abort" functionality is not shown at all (see dialogs.ycp). -#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage -#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" -#. so that this case is mapped to the "Cancel" functionality: -#. There is only a "Cancel" functionality (via the "back" button) which goes back one step -#. and the button with the "abort" functionality is not shown at all (see dialogs.ycp). -#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage -#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" -#. so that this case is mapped to the "Cancel" functionality: -#. There is only a "Cancel" functionality (via the "back" button) which goes back one step -#. and the button with the "abort" functionality is not shown at all (see dialogs.ycp). -#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage -#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" -#. so that this case is mapped to the "Cancel" functionality: -#: src/include/printer/policies.rb:414 -#: src/include/printer/printingvianetwork.rb:1102 -#: src/include/printer/sharing.rb:1037 +#. There is only a "Cancel" functionality (via the "back" button) which goes back one step +#. and the button with the "abort" functionality is not shown at all (see dialogs.ycp). +#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage +#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" +#. so that this case is mapped to the "Cancel" functionality: +#. There is only a "Cancel" functionality (via the "back" button) which goes back one step +#. and the button with the "abort" functionality is not shown at all (see dialogs.ycp). +#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage +#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" +#. so that this case is mapped to the "Cancel" functionality: +#. There is only a "Cancel" functionality (via the "back" button) which goes back one step +#. and the button with the "abort" functionality is not shown at all (see dialogs.ycp). +#. Unfortunately when the YaST package installer is run via Printerlib::TestAndInstallPackage +#. it leaves a misused "abort" button labeled "Skip Autorefresh" with WidgetID "`abort" +#. so that this case is mapped to the "Cancel" functionality: +#: src/include/printer/policies.rb:414 +#: src/include/printer/printingvianetwork.rb:1102 +#: src/include/printer/sharing.rb:1037 msgid "Failed to apply the settings to the system." msgstr "시스템에 설정을 적용하지 못했습니다." -#. An entry for a ComboBox from which the user can select -#. that printer information is not accepted from any remote CUPS servers: -#: src/include/printer/printingvianetwork.rb:52 +#. An entry for a ComboBox from which the user can select +#. that printer information is not accepted from any remote CUPS servers: +#: src/include/printer/printingvianetwork.rb:52 msgid "do not accept any printer announcement" msgstr "프린터 알림 허용 안 함" -#. An entry for a ComboBox from which the user can select -#. that printer information is accepted from -#. all remote CUPS servers: -#: src/include/printer/printingvianetwork.rb:56 +#. An entry for a ComboBox from which the user can select +#. that printer information is accepted from +#. all remote CUPS servers: +#: src/include/printer/printingvianetwork.rb:56 msgid "accept all announcements from anywhere" msgstr "모든 알림 허용" -#. An entry for a ComboBox from which the user can select -#. that printer information is accepted from -#. remote CUPS servers in the local network: -#: src/include/printer/printingvianetwork.rb:60 +#. An entry for a ComboBox from which the user can select +#. that printer information is accepted from +#. remote CUPS servers in the local network: +#: src/include/printer/printingvianetwork.rb:60 msgid "accept from all hosts in the local network" msgstr "로컬 네트워크에 있는 모든 호스트로부터 받음" -#. An entry for a ComboBox from which the user can select -#. that printer information is accepted only from -#. remote CUPS servers with specific addresses -#. where the specific addresses are specified in a TextEntry below: -#: src/include/printer/printingvianetwork.rb:67 +#. An entry for a ComboBox from which the user can select +#. that printer information is accepted only from +#. remote CUPS servers with specific addresses +#. where the specific addresses are specified in a TextEntry below: +#: src/include/printer/printingvianetwork.rb:67 msgid "accept only from the specific addresses below" msgstr "지정한 주소에서만 받음" -#: src/include/printer/printingvianetwork.rb:74 +#: src/include/printer/printingvianetwork.rb:74 msgid "Use CUPS to Print Via Network" msgstr "네트워크를 통한 인쇄에 CUPS 사용" -#. A CheckBox to accept printer information from remote CUPS servers: -#: src/include/printer/printingvianetwork.rb:81 +#. A CheckBox to accept printer information from remote CUPS servers: +#: src/include/printer/printingvianetwork.rb:81 msgid "&Accept Printer Announcements from CUPS Servers" msgstr "CUPS 서버의 프린터 알림 허용(&A)" -#. A header for a ComboBox from which the user can select -#. a usual general setting from which remote CUPS servers -#. printer information is accepted: -#: src/include/printer/printingvianetwork.rb:96 +#. A header for a ComboBox from which the user can select +#. a usual general setting from which remote CUPS servers +#. printer information is accepted: +#: src/include/printer/printingvianetwork.rb:96 msgid "&General Setting" msgstr "일반 설정(&G)" -#. A header for a TextEntry where the user can additionally -#. enter specific IP addresses and/or network/netmask -#. from where remote printer information is accepted: -#: src/include/printer/printingvianetwork.rb:121 +#. A header for a TextEntry where the user can additionally +#. enter specific IP addresses and/or network/netmask +#. from where remote printer information is accepted: +#: src/include/printer/printingvianetwork.rb:121 msgid "Additional IP Addresses or &Network/Netmask (separated by space)" msgstr "추가 IP 주소 또는 네트워크/넷마스크(공백으로 구분)(&N)" -#. A CheckBox to poll printer information from remote CUPS servers: -#: src/include/printer/printingvianetwork.rb:134 +#. A CheckBox to poll printer information from remote CUPS servers: +#: src/include/printer/printingvianetwork.rb:134 msgid "&Request Printer Information from CUPS Servers" msgstr "CUPS 서버의 프린터 정보 요청(&R)" -#. A header for a TextEntry where the user can enter -#. CUPS server names and/or IP addresses -#. from where remote printer information is polled: -#: src/include/printer/printingvianetwork.rb:146 +#. A header for a TextEntry where the user can enter +#. CUPS server names and/or IP addresses +#. from where remote printer information is polled: +#: src/include/printer/printingvianetwork.rb:146 msgid "Polled CUPS server names or &IP Addresses (separated by space)" msgstr "폴링된 CUPS 서버 이름 또는 IP 주소(공백으로 구분)(&I)" -#. A CheckBox to do all printing tasks directly -#. only via one single remote CUPS server: -#: src/include/printer/printingvianetwork.rb:158 +#. A CheckBox to do all printing tasks directly +#. only via one single remote CUPS server: +#: src/include/printer/printingvianetwork.rb:158 msgid "&Do All Printing Directly via One Single CUPS Server" msgstr "단일 CUPS 서버를 통해 모든 인쇄 직접 수행(&D)" -#. A header for a TextEntry where the user can enter -#. the one single remote CUPS server which is used -#. to do all his printing tasks: -#: src/include/printer/printingvianetwork.rb:170 +#. A header for a TextEntry where the user can enter +#. the one single remote CUPS server which is used +#. to do all his printing tasks: +#: src/include/printer/printingvianetwork.rb:170 msgid "&One single CUPS server name or IP Address" msgstr "단일 CUPS 서버 이름 또는 IP 주소(&O)" -#. A PushButton to test whether or not the one single remote CUPS server -#. which is used to do all printing tasks is accessible: -#: src/include/printer/printingvianetwork.rb:178 +#. A PushButton to test whether or not the one single remote CUPS server +#. which is used to do all printing tasks is accessible: +#: src/include/printer/printingvianetwork.rb:178 msgid "&Test Server" msgstr "테스트 서버(&T)" -#. or to set up to use a network printer directly: -#: src/include/printer/printingvianetwork.rb:189 +#. or to set up to use a network printer directly: +#: src/include/printer/printingvianetwork.rb:189 msgid "Use Another Print Server or Use a Network Printer Directly" msgstr "다른 프린트 서버 사용 또는 직접 네트워크 프린터 사용" -#. Use the exact same wording "printer announcements from CUPS servers" -#. as in the matching CheckBox to accept printer information from remote CUPS servers: -#: src/include/printer/printingvianetwork.rb:208 +#. Use the exact same wording "printer announcements from CUPS servers" +#. as in the matching CheckBox to accept printer information from remote CUPS servers: +#: src/include/printer/printingvianetwork.rb:208 msgid "A firewall may reject printer announcements from CUPS servers" msgstr "방화벽에서 CUPS 서버의 프린터 알림을 거부할 수 있습니다." -#. Popup::AnyMessage message: -#. Popup::AnyMessage message: -#: src/include/printer/printingvianetwork.rb:210 -#: src/include/printer/sharing.rb:263 +#. Popup::AnyMessage message: +#. Popup::AnyMessage message: +#: src/include/printer/printingvianetwork.rb:210 +#: src/include/printer/sharing.rb:263 msgid "Regarding firewall setup see the help text of this dialog." msgstr "방화벽 설정에 대해서는 이 대화 상자의 도움말 텍스트를 참조하십시오." -#. to a client-only config but with an effectively empty server name. -#. Such a client-only config does not make sense: -#: src/include/printer/printingvianetwork.rb:364 +#. to a client-only config but with an effectively empty server name. +#. Such a client-only config does not make sense: +#: src/include/printer/printingvianetwork.rb:364 msgid "A valid CUPS server name must be entered." msgstr "유효한 CUPS 서버 이름을 입력해야 합니다." -#. when a client-only server is not accessible -#. where %1 will be replaced by the server name: -#: src/include/printer/printingvianetwork.rb:391 +#. when a client-only server is not accessible +#. where %1 will be replaced by the server name: +#: src/include/printer/printingvianetwork.rb:391 msgid "Continue regardless that '%1' is not accessible?" msgstr "'%1'에 액세스할 수 없다는 것과 상관없이 계속하시겠습니까?" -#. Header of a Popup::ContinueCancelHeadline -#. Body of a Popup::ContinueCancelHeadline -#. when a client-only server is not accessible: -#: src/include/printer/printingvianetwork.rb:396 +#. Header of a Popup::ContinueCancelHeadline +#. Body of a Popup::ContinueCancelHeadline +#. when a client-only server is not accessible: +#: src/include/printer/printingvianetwork.rb:396 msgid "A non-accessible server leads to an endless sequence of failures." msgstr "서버에 액세스할 수 없는 경우 실패가 끝없이 반복됩니다." -#. where %1 will be replaced by the server name. -#: src/include/printer/printingvianetwork.rb:430 +#. where %1 will be replaced by the server name. +#: src/include/printer/printingvianetwork.rb:430 msgid "Tried to set 'ServerName %1' in /etc/cups/client.conf." msgstr "/etc/cups/client.conf에서 'ServerName %1'을(를) 설정하려고 했습니다." -#. where %1 will be replaced by the server name. -#: src/include/printer/printingvianetwork.rb:441 +#. where %1 will be replaced by the server name. +#: src/include/printer/printingvianetwork.rb:441 msgid "Failed to set 'ServerName %1' in /etc/cups/client.conf." msgstr "/etc/cups/client.conf에서 'ServerName %1'을(를) 설정하지 못했습니다." -#. PopupYesNoHeadline body: -#: src/include/printer/printingvianetwork.rb:467 +#. PopupYesNoHeadline body: +#: src/include/printer/printingvianetwork.rb:467 msgid "The checkbox to do all printing via one CUPS server was disabled." msgstr "단일 CUPS 서버를 통해 모든 인쇄 수행 확인란이 비활성화되었습니다." -#. An effectively non-empty current_browse_allow_value requires "Browsing On" in cupsd.conf: -#. It was initially a BrowsePoll config but the user has -#. changed the server name values to be effectively empty. -#. This is the same as to turn off the BrowsePoll config so that -#. the "BrowsePoll config should be disabled" case below is triggered here: -#. Having "BrowseAddress" entries requires "Browsing On", -#. otherwise browsing information would not be sent at all: -#: src/include/printer/printingvianetwork.rb:548 -#: src/include/printer/printingvianetwork.rb:638 -#: src/include/printer/sharing.rb:575 +#. An effectively non-empty current_browse_allow_value requires "Browsing On" in cupsd.conf: +#. It was initially a BrowsePoll config but the user has +#. changed the server name values to be effectively empty. +#. This is the same as to turn off the BrowsePoll config so that +#. the "BrowsePoll config should be disabled" case below is triggered here: +#. Having "BrowseAddress" entries requires "Browsing On", +#. otherwise browsing information would not be sent at all: +#: src/include/printer/printingvianetwork.rb:548 +#: src/include/printer/printingvianetwork.rb:638 +#: src/include/printer/sharing.rb:575 msgid "Failed to set 'Browsing On' in /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'Browsing On'을 설정하지 못했습니다." -#. where %1 will be replaced by the values for BrowseAllow. -#: src/include/printer/printingvianetwork.rb:569 +#. where %1 will be replaced by the values for BrowseAllow. +#: src/include/printer/printingvianetwork.rb:569 msgid "Failed to set BrowseAllow value(s) '%1' in /etc/cups/cupsd.conf." -msgstr "" -"/etc/cups/cupsd.conf에서 BrowseAllow 값 '%1'을(를) 설정하지 못했습니다." +msgstr "/etc/cups/cupsd.conf에서 BrowseAllow 값 '%1'을(를) 설정하지 못했습니다." -#. but now the user has deactivated it -#. so that the BrowseAllow config should be disabled. -#. Do not change the global "Browsing On/Off" entry in cupsd.conf -#. because "Browsing Off" disables also sharing of local printers -#. which might be needed by the "Share Printers" dialog. -#. Instead set only "BrowseAllow none" in cupsd.conf: -#: src/include/printer/printingvianetwork.rb:597 +#. but now the user has deactivated it +#. so that the BrowseAllow config should be disabled. +#. Do not change the global "Browsing On/Off" entry in cupsd.conf +#. because "Browsing Off" disables also sharing of local printers +#. which might be needed by the "Share Printers" dialog. +#. Instead set only "BrowseAllow none" in cupsd.conf: +#: src/include/printer/printingvianetwork.rb:597 msgid "Failed to set 'BrowseAllow none' in /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'BrowseAllow none'을 설정하지 못했습니다." -#. a BrowsePoll config but with effectively empty server names. -#. Such a BrowsePoll config does not make sense: -#: src/include/printer/printingvianetwork.rb:615 +#. a BrowsePoll config but with effectively empty server names. +#. Such a BrowsePoll config does not make sense: +#: src/include/printer/printingvianetwork.rb:615 msgid "At least one valid CUPS server name must be entered." msgstr "유효한 CUPS 서버 이름을 하나 이상 입력해야 합니다." -#. where %1 will be replaced by the values for BrowsePoll. -#: src/include/printer/printingvianetwork.rb:659 +#. where %1 will be replaced by the values for BrowsePoll. +#: src/include/printer/printingvianetwork.rb:659 msgid "Failed to set BrowsePoll value(s) '%1' in /etc/cups/cupsd.conf" msgstr "/etc/cups/cupsd.conf에서 BrowsePoll 값 '%1'을(를) 설정하지 못했습니다." -#. but now the user has deactivated it -#. so that the BrowsePoll config should be disabled: -#. Set only "BrowsePoll none" in cupsd.conf: -#: src/include/printer/printingvianetwork.rb:684 +#. but now the user has deactivated it +#. so that the BrowsePoll config should be disabled: +#. Set only "BrowsePoll none" in cupsd.conf: +#: src/include/printer/printingvianetwork.rb:684 msgid "Failed to set 'BrowsePoll none' in /etc/cups/cupsd.conf" msgstr "/etc/cups/cupsd.conf에서 'BrowsePoll none'을 설정하지 못했습니다." -#. A "accept browsing info" config with a local running cupsd -#. was switched to a "not accept browsing info" config or -#. a BrowsePoll config with a local running cupsd was disabled. -#. A cups-polld polls remote servers for a list of available printer queues. -#. Those information is then broadcast to the localhost interface (127.0.0.1) -#. on the specified browse port for reception by the local cupsd. -#. Theerfore for the cupsd BrowsePoll information is the same -#. as the usual Browsing information via BrowseAllow. -#. The default BrowseTimeout value for the local cupsd is 5 minutes. -#. Therefore it takes by default 5 minutes until printer information -#. that was previously received by Browsing is removed (via timeout) -#. from the local cupsd's list. -#. I assume most users do not like to wait 5 minutes which is no problem -#. because they can just click the [OK] button to continue but then -#. they are at least informend why there may be still remote queues: -#: src/include/printer/printingvianetwork.rb:727 +#. A "accept browsing info" config with a local running cupsd +#. was switched to a "not accept browsing info" config or +#. a BrowsePoll config with a local running cupsd was disabled. +#. A cups-polld polls remote servers for a list of available printer queues. +#. Those information is then broadcast to the localhost interface (127.0.0.1) +#. on the specified browse port for reception by the local cupsd. +#. Theerfore for the cupsd BrowsePoll information is the same +#. as the usual Browsing information via BrowseAllow. +#. The default BrowseTimeout value for the local cupsd is 5 minutes. +#. Therefore it takes by default 5 minutes until printer information +#. that was previously received by Browsing is removed (via timeout) +#. from the local cupsd's list. +#. I assume most users do not like to wait 5 minutes which is no problem +#. because they can just click the [OK] button to continue but then +#. they are at least informend why there may be still remote queues: +#: src/include/printer/printingvianetwork.rb:727 msgid "" -"When switching from 'accept printer announcements' to 'not accept " -"announcements'\n" +"When switching from 'accept printer announcements' to 'not accept announcements'\n" "or after 'request printer information from CUPS servers' was disabled\n" "it takes usually 5 minutes until already received information faded away..." msgstr "" @@ -4132,174 +3996,167 @@ "또는 'CUPS 서버의 프린터 정보 요청'이 비활성화된 후\n" "이미 수신된 정보가 사라질 때까지 대체로 5분 정도 걸립니다." -#. where %1 will be replaced by the server name. -#: src/include/printer/printingvianetwork.rb:1144 +#. where %1 will be replaced by the server name. +#: src/include/printer/printingvianetwork.rb:1144 msgid "The server '%1' is accessible via port 631 (IPP/CUPS)." msgstr "서버 '%1'은(는) 포트 631(IPP/CUPS)을 통해 액세스할 수 있습니다." -#. A RadioButton label to deny remote access to local print queues: -#: src/include/printer/sharing.rb:64 +#. A RadioButton label to deny remote access to local print queues: +#: src/include/printer/sharing.rb:64 msgid "&Deny Remote Access" msgstr "원격 액세스 거부(&D)" -#. A RadioButton label to allow remote access to local print queues: -#: src/include/printer/sharing.rb:73 +#. A RadioButton label to allow remote access to local print queues: +#: src/include/printer/sharing.rb:73 msgid "&Allow Remote Access" msgstr "원격 액세스 허용(&A)" -#. A label which explains how the subsequent choices can be used: -#: src/include/printer/sharing.rb:83 +#. A label which explains how the subsequent choices can be used: +#: src/include/printer/sharing.rb:83 msgid "There are various ways how to specify which remote hosts are allowed:" msgstr "허용되는 원격 호스트를 지정하는 다양한 방법이 있습니다." -#. A CheckBox label to allow remote access to local print queues -#. for computers within the local network: -#: src/include/printer/sharing.rb:100 +#. A CheckBox label to allow remote access to local print queues +#. for computers within the local network: +#: src/include/printer/sharing.rb:100 msgid "For computers within the &local network" msgstr "로컬 네트워크 내 컴퓨터(&L)" -#. A CheckBox label to publish local print queues by default within the local network: -#: src/include/printer/sharing.rb:111 +#. A CheckBox label to publish local print queues by default within the local network: +#: src/include/printer/sharing.rb:111 msgid "&Publish printers within the local network" msgstr "로컬 네트워크 내의 프린터 게시(&P)" -#. A caption for a table to allow remote access to local print queues -#. via network interfaces specified in the table below: -#: src/include/printer/sharing.rb:121 +#. A caption for a table to allow remote access to local print queues +#. via network interfaces specified in the table below: +#: src/include/printer/sharing.rb:121 msgid "Via network interfaces" msgstr "네트워크 인터페이스를 통해" -#: src/include/printer/sharing.rb:133 +#: src/include/printer/sharing.rb:133 msgid "Interface" msgstr "인터페이스" -#. A table column header where the column shows whether or not -#. local print queues are published by default -#. via the network interface in the other table column: -#: src/include/printer/sharing.rb:137 +#. A table column header where the column shows whether or not +#. local print queues are published by default +#. via the network interface in the other table column: +#: src/include/printer/sharing.rb:137 msgid "Publish printers via this interface" msgstr "이 인터페이스를 통해 프린터 게시" -#. A PushButton label to add a network interface to the table which shows -#. the network interfaces to allow remote access to local print queues: -#: src/include/printer/sharing.rb:148 +#. A PushButton label to add a network interface to the table which shows +#. the network interfaces to allow remote access to local print queues: +#: src/include/printer/sharing.rb:148 msgid "&Add" msgstr "추가(&A)" -#. A PushButton label to change a network interface in the table which shows -#. the network interfaces to allow remote access to local print queues: -#: src/include/printer/sharing.rb:154 +#. A PushButton label to change a network interface in the table which shows +#. the network interfaces to allow remote access to local print queues: +#: src/include/printer/sharing.rb:154 msgid "&Edit" msgstr "편집(&E)" -#. A PushButton label to delete a network interface from the table which shows -#. the network interfaces to allow remote access to local print queues: -#: src/include/printer/sharing.rb:160 +#. A PushButton label to delete a network interface from the table which shows +#. the network interfaces to allow remote access to local print queues: +#: src/include/printer/sharing.rb:160 msgid "&Delete" msgstr "삭제(&D)" -#. A caption to allow remote access to local print queues -#. for hosts and/or networks specified in two TextEntries below: -#: src/include/printer/sharing.rb:169 +#. A caption to allow remote access to local print queues +#. for hosts and/or networks specified in two TextEntries below: +#: src/include/printer/sharing.rb:169 msgid "For Specific IP Addresses or Networks" msgstr "특정 IP 주소 또는 네트워크의 경우" -#. TextEntry to allow remote access to local print queues -#. for hosts and/or networks: -#: src/include/printer/sharing.rb:180 -msgid "" -"Allow access from those IP addresses or &network/netmask (separated by space)" +#. TextEntry to allow remote access to local print queues +#. for hosts and/or networks: +#: src/include/printer/sharing.rb:180 +msgid "Allow access from those IP addresses or &network/netmask (separated by space)" msgstr "해당 IP 주소 또는 네트워크/넷마스크의 액세스 허용(공백으로 구분)(&N)" -#. TextEntry to publish local print queues -#. to IP addresses and/or network broadcast addresses: -#: src/include/printer/sharing.rb:192 -msgid "" -"Publish to these IP addresses or network &broadcast addresses (separated by " -"space)" -msgstr "" -"이러한 IP 주소 또는 네트워크 브로드캐스트 주소에 게시(공백으로 구분)(&B)" +#. TextEntry to publish local print queues +#. to IP addresses and/or network broadcast addresses: +#: src/include/printer/sharing.rb:192 +msgid "Publish to these IP addresses or network &broadcast addresses (separated by space)" +msgstr "이러한 IP 주소 또는 네트워크 브로드캐스트 주소에 게시(공백으로 구분)(&B)" -#. A CheckBox label to publish local print queues by default -#. via a partivular network interface which is shown below. -#: src/include/printer/sharing.rb:214 +#. A CheckBox label to publish local print queues by default +#. via a partivular network interface which is shown below. +#: src/include/printer/sharing.rb:214 msgid "&Publish printers by default via the network interface below." msgstr "기본적으로 아래의 네트워크 인터페이스를 통해 프린터 공개(&P)" -#. A header for a ComboBox which lists network interfaces: -#: src/include/printer/sharing.rb:221 +#. A header for a ComboBox which lists network interfaces: +#: src/include/printer/sharing.rb:221 msgid "Available Network &Interfaces:" msgstr "사용 가능한 네트워크 인터페이스(&I)" -#. Use the exact same wording "remote access" -#. as in the matching RadioButton label to allow remote access to local print queues: -#: src/include/printer/sharing.rb:261 +#. Use the exact same wording "remote access" +#. as in the matching RadioButton label to allow remote access to local print queues: +#: src/include/printer/sharing.rb:261 msgid "A firewall may prevent remote access" msgstr "방화벽에서 원격 액세스를 차단할 수도 있습니다." -#. Do not change or translate "Listen localhost", it is a system settings name. -#: src/include/printer/sharing.rb:396 +#. Do not change or translate "Listen localhost", it is a system settings name. +#: src/include/printer/sharing.rb:396 msgid "Failed to set only 'Listen localhost' in /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'Listen localhost'만 설정하지 못했습니다." -#. Do not change or translate "Allow", it is a system settings name. -#: src/include/printer/sharing.rb:406 +#. Do not change or translate "Allow", it is a system settings name. +#: src/include/printer/sharing.rb:406 msgid "Failed to remove 'Allow' entries from /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'Allow' 항목을 제거하지 못했습니다." -#. Do not change or translate "BrowseAddress", it is a system settings name. -#. Do not change or translate "BrowseAddress", it is a system settings name. -#: src/include/printer/sharing.rb:424 src/include/printer/sharing.rb:594 +#. Do not change or translate "BrowseAddress", it is a system settings name. +#. Do not change or translate "BrowseAddress", it is a system settings name. +#: src/include/printer/sharing.rb:424 src/include/printer/sharing.rb:594 msgid "Failed to remove 'BrowseAddress' entries from /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'BrowseAddress' 항목을 제거하지 못했습니다." -#. where %1 will be replaced by one or more system settings values. -#. Do not change or translate "Allow", it is a system settings name. -#: src/include/printer/sharing.rb:536 +#. where %1 will be replaced by one or more system settings values. +#. Do not change or translate "Allow", it is a system settings name. +#: src/include/printer/sharing.rb:536 msgid "Failed to set 'Allow' entries '%1' in /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'Allow' 항목 '%1'을(를) 설정하지 못했습니다." -#. where %1 will be replaced by one or more system settings values. -#. Do not change or translate "BrowseAddress", it is a system settings name. -#: src/include/printer/sharing.rb:560 +#. where %1 will be replaced by one or more system settings values. +#. Do not change or translate "BrowseAddress", it is a system settings name. +#: src/include/printer/sharing.rb:560 msgid "Failed to set 'BrowseAddress' entries '%1' in /etc/cups/cupsd.conf." -msgstr "" -"/etc/cups/cupsd.conf에서 'BrowseAddress' 항목 '%1'을(를) 설정하지 못했습니다." +msgstr "/etc/cups/cupsd.conf에서 'BrowseAddress' 항목 '%1'을(를) 설정하지 못했습니다." -#. Do not change or translate "Listen *:631", it is a system settings name. -#: src/include/printer/sharing.rb:613 +#. Do not change or translate "Listen *:631", it is a system settings name. +#: src/include/printer/sharing.rb:613 msgid "Failed to set 'Listen *:631' in /etc/cups/cupsd.conf." msgstr "/etc/cups/cupsd.conf에서 'Listen *:631'을 설정하지 못했습니다." -#. PopupYesNoHeadline headline -#. PopupYesNoHeadline body: -#: src/include/printer/sharing.rb:643 -msgid "" -"A remote CUPS server setting conflicts with sharing local printer " -"configurations." +#. PopupYesNoHeadline headline +#. PopupYesNoHeadline body: +#: src/include/printer/sharing.rb:643 +msgid "A remote CUPS server setting conflicts with sharing local printer configurations." msgstr "원격 CUPS 서버 설정이 로컬 프린터 구성 공유 시 충돌합니다." -#. Only "Printing via Network" configuration of printer. -#. For use with autoinstallation. -#. @return sequence result -#. Whole configuration of printer but without reading and writing. -#. For use with proposal at the end of the system installation. -#. @return sequence result -#: src/include/printer/wizards.rb:195 src/include/printer/wizards.rb:215 +#. Only "Printing via Network" configuration of printer. +#. For use with autoinstallation. +#. @return sequence result +#. Whole configuration of printer but without reading and writing. +#. For use with proposal at the end of the system installation. +#. @return sequence result +#: src/include/printer/wizards.rb:195 src/include/printer/wizards.rb:215 msgid "Printer Configuration" msgstr "프린터 구성" -#. Initialization dialog contents -#. Initialization dialog contents -#: src/include/printer/wizards.rb:197 src/include/printer/wizards.rb:217 +#. Initialization dialog contents +#. Initialization dialog contents +#: src/include/printer/wizards.rb:197 src/include/printer/wizards.rb:217 msgid "Initializing..." msgstr "초기화 중..." -#. Settings: -#. Define all variables needed for configuration of a printer: -#. Global variables: -#. Used by AutoYaST by calling in printer_auto.ycp the "Summary" function. -#: src/modules/Printer.rb:58 +#. Settings: +#. Define all variables needed for configuration of a printer: +#. Global variables: +#. Used by AutoYaST by calling in printer_auto.ycp the "Summary" function. +#: src/modules/Printer.rb:58 msgid "" "<p>\n" "AutoYaST settings for printing with CUPS via network.<br>\n" @@ -4311,15 +4168,15 @@ "로컬 프린트 대기열에 대한 AutoYaST 지원이 없습니다.\n" "</p>" -#. Empty an existing progress file so that the DownloadProgress starts at the beginning. -#. Don't care if this command is successful. All what matters is if CreateDatabase() works. -#: src/modules/Printer.rb:367 +#. Empty an existing progress file so that the DownloadProgress starts at the beginning. +#. Don't care if this command is successful. All what matters is if CreateDatabase() works. +#: src/modules/Printer.rb:367 msgid "Retrieving printer driver information..." msgstr "프린터 드라이버 정보 검색 중..." -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/modules/Printer.rb:382 +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/modules/Printer.rb:382 msgid "" "Retrieving printer driver information...\n" "(this could take more than a minute)" @@ -4327,265 +4184,263 @@ "프린터 드라이버 정보 검색 중...\n" "(이 작업은 1분 이상 걸릴 수 있습니다.)" -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Printer.rb:396 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Printer.rb:396 msgid "Failed to create PPD database." msgstr "PPD 데이터베이스를 생성하지 못했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Printer.rb:415 src/modules/Printer.rb:541 -#: src/modules/Printer.rb:621 src/modules/Printer.rb:694 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Printer.rb:415 src/modules/Printer.rb:541 +#: src/modules/Printer.rb:621 src/modules/Printer.rb:694 msgid "File %1 does not exist." msgstr "%1 파일이 없습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Printer.rb:437 src/modules/Printer.rb:566 -#: src/modules/Printer.rb:641 src/modules/Printer.rb:714 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Printer.rb:437 src/modules/Printer.rb:566 +#: src/modules/Printer.rb:641 src/modules/Printer.rb:714 msgid "Failed to read %1." msgstr "%1 읽기에 실패했습니다." -#. ExpectedSize to 1 (setting it to 0 results wrong output) by calling -#. UI::ChangeWidget( `id(`create_database_progress), `ExpectedSize, 1 ) -#. results bad looking output because the DownloadProgress widget is visible re-drawn -#. first with a small 1% initially starting progress bar which then jumps up to 100% -#. but what is intended is that the current progress bar jumps directly up to 100%. -#. Therefore DownloadProgress is not used at all but replaced by a 100% ProgressBar. -#. Because ProgressBar has a different default width than DownloadProgress, -#. a MinWidth which is sufficient for both is set above. -#. The size is measured in units roughly equivalent to the size of a character -#. in the respective UI (1/80 of the full screen width horizontally, -#. 1/25 of the full screen width vertically) where full screen size -#. is 640x480 pixels (y2qt) or 80x25 characters (y2ncurses). -#: src/modules/Printer.rb:459 +#. ExpectedSize to 1 (setting it to 0 results wrong output) by calling +#. UI::ChangeWidget( `id(`create_database_progress), `ExpectedSize, 1 ) +#. results bad looking output because the DownloadProgress widget is visible re-drawn +#. first with a small 1% initially starting progress bar which then jumps up to 100% +#. but what is intended is that the current progress bar jumps directly up to 100%. +#. Therefore DownloadProgress is not used at all but replaced by a 100% ProgressBar. +#. Because ProgressBar has a different default width than DownloadProgress, +#. a MinWidth which is sufficient for both is set above. +#. The size is measured in units roughly equivalent to the size of a character +#. in the respective UI (1/80 of the full screen width horizontally, +#. 1/25 of the full screen width vertically) where full screen size +#. is 640x480 pixels (y2qt) or 80x25 characters (y2ncurses). +#: src/modules/Printer.rb:459 msgid "Retrieved Printer Driver Information" msgstr "검색된 프린터 드라이버 정보" -#. Empty an existing progress file so that the DownloadProgress starts at the beginning. -#. Don't care if this command is successful. -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/modules/Printer.rb:491 src/modules/Printer.rb:508 +#. Empty an existing progress file so that the DownloadProgress starts at the beginning. +#. Don't care if this command is successful. +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/modules/Printer.rb:491 src/modules/Printer.rb:508 msgid "Detecting printers..." msgstr "프린터 검색 중..." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no printer was autodetected. -#. The latter results no error. -#: src/modules/Printer.rb:522 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no printer was autodetected. +#. The latter results no error. +#: src/modules/Printer.rb:522 msgid "Failed to detect printers automatically." msgstr "프린터를 자동으로 감지하지 못했습니다." -#. ExpectedSize to 1 results bad looking output (see above). -#. Therefore DownloadProgress is not used at all but replaced by a 100% ProgressBar -#. which requires a MinWidth with sufficient size (see above). -#: src/modules/Printer.rb:579 +#. ExpectedSize to 1 results bad looking output (see above). +#. Therefore DownloadProgress is not used at all but replaced by a 100% ProgressBar +#. which requires a MinWidth with sufficient size (see above). +#: src/modules/Printer.rb:579 msgid "Printer detection finished" msgstr "프린터 검색 완료됨" -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no queue was detected -#. (e.g. simply because there is no queue). This results no error. -#: src/modules/Printer.rb:607 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no queue was detected +#. (e.g. simply because there is no queue). This results no error. +#: src/modules/Printer.rb:607 msgid "Failed to detect print queues." msgstr "인쇄 대기열을 감지하지 못했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no queue was detected -#. (e.g. simply because there is no queue). This results no error. -#: src/modules/Printer.rb:678 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no queue was detected +#. (e.g. simply because there is no queue). This results no error. +#: src/modules/Printer.rb:678 msgid "Failed to determine driver options for queue %1." msgstr "대기열 %1에 대한 드라이버 옵션을 지정하지 못했습니다." -#. Initialize printer configuration (checks only the installed packages) see -#. http://en.opensuse.org/Archive:YaST_Printer_redesign#Basic_Implementation_Pr...: -#. for background information -#. @return true on success -#: src/modules/Printer.rb:735 +#. Initialize printer configuration (checks only the installed packages) see +#. http://en.opensuse.org/Archive:YaST_Printer_redesign#Basic_Implementation_Pr...: +#. for background information +#. @return true on success +#: src/modules/Printer.rb:735 msgid "Initializing Printer Configuration" msgstr "프린터 구성 초기화" -#: src/modules/Printer.rb:738 +#: src/modules/Printer.rb:738 msgid "Check installed packages" msgstr "설치된 패키지 확인" -#. 1. progress stage name of a Progress::New: -#: src/modules/Printer.rb:740 +#. 1. progress stage name of a Progress::New: +#: src/modules/Printer.rb:740 msgid "Checking installed packages..." msgstr "설치된 패키지 확인 중..." -#. Last progress step progress bar title of a Progress::New: -#. Last progress step progress bar title of a Progress::New: -#: src/modules/Printer.rb:742 src/modules/Printer.rb:792 +#. Last progress step progress bar title of a Progress::New: +#. Last progress step progress bar title of a Progress::New: +#: src/modules/Printer.rb:742 src/modules/Printer.rb:792 msgid "Finished" msgstr "완료" -#. Finish printer configuration (does actually nothing except to exit verbosely) see -#. http://en.opensuse.org/Archive:YaST_Printer_redesign#Basic_Implementation_Pr...: -#. for background information -#. @return true in any case (because it only exits) -#: src/modules/Printer.rb:785 +#. Finish printer configuration (does actually nothing except to exit verbosely) see +#. http://en.opensuse.org/Archive:YaST_Printer_redesign#Basic_Implementation_Pr...: +#. for background information +#. @return true in any case (because it only exits) +#: src/modules/Printer.rb:785 msgid "Finishing Printer Configuration" msgstr "프린터 구성 완료 중" -#: src/modules/Printer.rb:788 +#: src/modules/Printer.rb:788 msgid "Finish printer configuration" msgstr "프린터 구성 완료" -#. 1. progress stage name of a Progress::New: -#: src/modules/Printer.rb:790 +#. 1. progress stage name of a Progress::New: +#: src/modules/Printer.rb:790 msgid "Finishing printer configuration..." msgstr "프린터 구성 완료 중..." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no queue was detected -#. (e.g. simply because there is no queue). This results no error. -#: src/modules/Printer.rb:1098 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no queue was detected +#. (e.g. simply because there is no queue). This results no error. +#: src/modules/Printer.rb:1098 msgid "Cannot show print queues (failed to detect print queues)." msgstr "인쇄 대기열을 표시할 수 없습니다(인쇄 대기열 감지 실패)." -#. Use local variables to have shorter variable names: -#: src/modules/Printer.rb:1119 +#. Use local variables to have shorter variable names: +#: src/modules/Printer.rb:1119 msgid "Local" msgstr "로컬" -#: src/modules/Printer.rb:1120 +#: src/modules/Printer.rb:1120 msgid "Class" msgstr "클래스" -#: src/modules/Printer.rb:1121 +#: src/modules/Printer.rb:1121 msgid "Remote" msgstr "원격" -#: src/modules/Printer.rb:1122 +#: src/modules/Printer.rb:1122 msgid "Yes" msgstr "예" -#. When the queue accepts print jobs and printing is enabled: -#: src/modules/Printer.rb:1124 +#. When the queue accepts print jobs and printing is enabled: +#: src/modules/Printer.rb:1124 msgid "Ready" msgstr "준비" -#: src/modules/Printer.rb:1125 +#: src/modules/Printer.rb:1125 msgid "Printout disabled" msgstr "출력 비활성화됨" -#: src/modules/Printer.rb:1128 +#: src/modules/Printer.rb:1128 msgid "Rejecting print jobs, printout disabled" msgstr "인쇄 작업 거부 중입니다. 인쇄 출력이 비활성화되었습니다." -#: src/modules/Printer.rb:1130 +#: src/modules/Printer.rb:1130 msgid "Rejecting print jobs" msgstr "인쇄 작업 거부 중" -#. Show a fallback text if there are no queues: -#: src/modules/Printer.rb:1167 +#. Show a fallback text if there are no queues: +#: src/modules/Printer.rb:1167 msgid "There is no print queue." msgstr "인쇄 대기열이 없습니다." -#. Only a simple message because before the function AutodetectPrinters -#. was called and this function would have shown more specific messages. -#: src/modules/Printer.rb:1212 +#. Only a simple message because before the function AutodetectPrinters +#. was called and this function would have shown more specific messages. +#: src/modules/Printer.rb:1212 msgid "Failed to autodetect printers." msgstr "프린터를 자동 감지하지 못했습니다." -#. Show a fallback text if there are no connections. -#: src/modules/Printer.rb:1474 +#. Show a fallback text if there are no connections. +#: src/modules/Printer.rb:1474 msgid "No connections." msgstr "연결이 없습니다." -#. A hint what to do if there are no connections. -#. 'Detect More' and 'Connection Wizard' are -#. button lables and must be translated accordingly: -#: src/modules/Printer.rb:1478 +#. A hint what to do if there are no connections. +#. 'Detect More' and 'Connection Wizard' are +#. button lables and must be translated accordingly: +#: src/modules/Printer.rb:1478 msgid "Try 'Detect More' or use the 'Connection Wizard'." msgstr "'기타 검색'을 시도하거나 '연결 마법사'를 사용하십시오." -#. Only a simple message because before the function CreateDatabase -#. was called and this function would have shown more specific messages. -#: src/modules/Printer.rb:1496 +#. Only a simple message because before the function CreateDatabase +#. was called and this function would have shown more specific messages. +#: src/modules/Printer.rb:1496 msgid "Failed to create the printer driver database." msgstr "프린터 드라이버 데이터베이스를 생성하지 못했습니다." -#. fallback entry for a SelectionBox when no connection is selected. -#. It will be replaced by real content, when a connection is selected. -#: src/modules/Printer.rb:1525 +#. fallback entry for a SelectionBox when no connection is selected. +#. It will be replaced by real content, when a connection is selected. +#: src/modules/Printer.rb:1525 msgid "Select a connection, then matching drivers show up here." msgstr "연결을 선택하십시오. 일치하는 드라이버가 여기에 표시됩니다." -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/modules/Printer.rb:1543 +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/modules/Printer.rb:1543 msgid "Determining matching printer drivers..." msgstr "일치하는 프린터 드라이버 확인 중..." -#. show a meaningful text as fallback entry ('Find More' is a button label). -#: src/modules/Printer.rb:1588 +#. show a meaningful text as fallback entry ('Find More' is a button label). +#: src/modules/Printer.rb:1588 msgid "No matching driver found. Change the search string or try 'Find More'." -msgstr "" -"일치하는 드라이버를 찾을 수 없습니다. 검색 문자열을 변경하거나 '기타 찾기'를 " -"시도하십시오." +msgstr "일치하는 드라이버를 찾을 수 없습니다. 검색 문자열을 변경하거나 '기타 찾기'를 시도하십시오." -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/modules/Printer.rb:1613 +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/modules/Printer.rb:1613 msgid "Processing many printer drivers. Please wait..." msgstr "여러 드라이버를 처리하고 있습니다. 잠시 기다려주십시오..." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Printer.rb:2059 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Printer.rb:2059 msgid "Failed to add queue %1." msgstr "%1 대기열을 추가하지 못했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Printer.rb:2179 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Printer.rb:2179 msgid "Failed to delete configuration %1." msgstr "구성 %1을(를) 삭제하지 못했습니다." -#. Only a simple message because this is only a fallback case -#. which should not happen at all: -#: src/modules/Printer.rb:2202 +#. Only a simple message because this is only a fallback case +#. which should not happen at all: +#: src/modules/Printer.rb:2202 msgid "Failed to determine the driver options." msgstr "드라이버 옵션을 지정하지 못했습니다." -#. Info for a currently selected item which is to be set as new value in the system: -#: src/modules/Printer.rb:2209 +#. Info for a currently selected item which is to be set as new value in the system: +#: src/modules/Printer.rb:2209 msgid "new value" msgstr "새 값" -#. Info for a current setting which is the currently still saved value in the system: -#: src/modules/Printer.rb:2211 +#. Info for a current setting which is the currently still saved value in the system: +#: src/modules/Printer.rb:2211 msgid "saved value" msgstr "저장된 값" -#: src/modules/Printer.rb:2358 +#: src/modules/Printer.rb:2358 msgid "The server '" msgstr "서버 '" -#. Message of a Popup::Error when hp-setup should be run. -#. Do not change or translate "hp-setup", it is a program name. -#. Do not change or translate "DISPLAY", it is an environment variable name. -#: src/modules/Printer.rb:2371 +#. Message of a Popup::Error when hp-setup should be run. +#. Do not change or translate "hp-setup", it is a program name. +#. Do not change or translate "DISPLAY", it is an environment variable name. +#: src/modules/Printer.rb:2371 msgid "" "Cannot run hp-setup because no graphical display can be opened.\n" "This happens in particular when YaST runs in text-only mode,\n" @@ -4599,9 +4454,9 @@ "또는 YaST 프로세스에서 그래픽 표시에 액세스할 수 없는 경우에 발생합니다.\n" "이 경우 사용자 'root'로 hp-setup을 수동으로 직접 실행해야 합니다.\n" -#. Message of a Popup::Error when hp-setup should be run. -#. Do not change or translate "hp-setup", it is a program name: -#: src/modules/Printer.rb:2381 +#. Message of a Popup::Error when hp-setup should be run. +#. Do not change or translate "hp-setup", it is a program name: +#: src/modules/Printer.rb:2381 msgid "" "Cannot run hp-setup because\n" "/usr/bin/hp-setup is not executable\n" @@ -4611,22 +4466,21 @@ "이 항목이 존재하지 않으므로 hp-setup을\n" "실행할 수 없습니다.\n" -#. Body of a Popup::ShowFeedback. -#. Do not change or translate "hp-setup", it is a program name: -#: src/modules/Printer.rb:2389 +#. Body of a Popup::ShowFeedback. +#. Do not change or translate "hp-setup", it is a program name: +#: src/modules/Printer.rb:2389 msgid "" "Launched hp-setup.\n" -"You must finish hp-setup before you can proceed with the printer " -"configuration.\n" +"You must finish hp-setup before you can proceed with the printer configuration.\n" msgstr "" "hp-setup을 시작했습니다.\n" "먼저 hp-setup을 완료해야 프린터 구성을 계속할 수 있습니다.\n" -#. from the BasicAdd dialog but the RPM package hplip is not installed: -#. Do not change or translate "hp-setup", it is a program name. -#. Do not change or translate "hplip", it is a package name. -#. Translate 'Driver Packages' the same as the PushButton name to go to the "Add Driver" dialog: -#: src/modules/Printer.rb:2423 +#. from the BasicAdd dialog but the RPM package hplip is not installed: +#. Do not change or translate "hp-setup", it is a program name. +#. Do not change or translate "hplip", it is a package name. +#. Translate 'Driver Packages' the same as the PushButton name to go to the "Add Driver" dialog: +#: src/modules/Printer.rb:2423 msgid "" "To run hp-setup, the RPM package hplip must be installed.\n" "Use 'Driver Packages' to install it." @@ -4634,105 +4488,99 @@ "hp-setup을 실행하려면 RPM 패키지 hplip를 설치해야 합니다.\n" "'드라이버 패키지'를 사용하여 설치하십시오." -#. Is the package available to be installed? -#. Package::Available returns nil if no package source is available. -#: src/modules/Printerlib.rb:179 -msgid "" -"Required package %1 is not installed and there is no package repository " -"available." -msgstr "" -"필수 패키지 %1이(가) 설치되지 않았고 사용 가능한 패키지 리포지토리가 없습니" -"다." +#. Is the package available to be installed? +#. Package::Available returns nil if no package source is available. +#: src/modules/Printerlib.rb:179 +msgid "Required package %1 is not installed and there is no package repository available." +msgstr "필수 패키지 %1이(가) 설치되지 않았고 사용 가능한 패키지 리포지토리가 없습니다." -#. Message of a Popup::Error where %1 will be replaced by the package name: -#: src/modules/Printerlib.rb:194 -msgid "" -"Required package %1 is not installed and not available in the repository." -msgstr "" -"필수 패키지 %1이(가) 설치되지 않았고 리포지토리에서 사용할 수 없습니다." +#. Message of a Popup::Error where %1 will be replaced by the package name: +#: src/modules/Printerlib.rb:194 +msgid "Required package %1 is not installed and not available in the repository." +msgstr "필수 패키지 %1이(가) 설치되지 않았고 리포지토리에서 사용할 수 없습니다." -#. Only a simple message because: -#. Either the user has explicitly rejected to install the package, -#. or this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Printerlib.rb:223 +#. Only a simple message because: +#. Either the user has explicitly rejected to install the package, +#. or this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Printerlib.rb:223 msgid "Failed to install required package %1." msgstr "필수 패키지 %1을(를) 설치하지 못했습니다." -#. where %1 will be replaced by the package name -#. when removing package %1 would break dependencies. -#: src/modules/Printerlib.rb:242 +#. where %1 will be replaced by the package name +#. when removing package %1 would break dependencies. +#: src/modules/Printerlib.rb:242 msgid "Remove package %1?" msgstr "%1 패키지를 제거하시겠습니까?" -#. where %1 will be replaced by the package name. -#: src/modules/Printerlib.rb:278 +#. where %1 will be replaced by the package name. +#: src/modules/Printerlib.rb:278 msgid "Removing package %1 would break dependencies." msgstr "%1 패키지를 제거하면 종속성이 손상됩니다." -#. where %1 will be replaced by the package name -#. when removing package %1 would break dependencies. -#: src/modules/Printerlib.rb:287 +#. where %1 will be replaced by the package name +#. when removing package %1 would break dependencies. +#: src/modules/Printerlib.rb:287 msgid "Remove %1 regardless of breaking dependencies?" msgstr "종속성 손상에 상관 없이 %1을(를) 제거하시겠습니까?" -#. Header of a Popup::ContinueCancelHeadline -#. Body of a Popup::ContinueCancelHeadline -#. when removing package %1 would break dependencies. -#: src/modules/Printerlib.rb:292 +#. Header of a Popup::ContinueCancelHeadline +#. Body of a Popup::ContinueCancelHeadline +#. when removing package %1 would break dependencies. +#: src/modules/Printerlib.rb:292 msgid "Breaking dependencies leads to arbitrary failures elsewhere." msgstr "종속성이 손상되면 예측할 수 없는 문제가 발생할 수 있습니다." -#. where %1 will be replaced by the package name. -#. Only a simple message because this error does not happen on a normal system. -#: src/modules/Printerlib.rb:309 +#. where %1 will be replaced by the package name. +#. Only a simple message because this error does not happen on a normal system. +#: src/modules/Printerlib.rb:309 msgid "Failed to remove package %1." msgstr "%1 패키지를 제거하지 못했습니다." -#. Enforce user confirmation before a new service is started -#. to be on the safe side that the user knows about it: -#: src/modules/Printerlib.rb:335 +#. Enforce user confirmation before a new service is started +#. to be on the safe side that the user knows about it: +#: src/modules/Printerlib.rb:335 msgid "Start locally running CUPS daemon" msgstr "로컬에서 실행 중인 CUPS 데몬 시작" -#. PopupYesNoHeadline body: -#: src/modules/Printerlib.rb:337 +#. PopupYesNoHeadline body: +#: src/modules/Printerlib.rb:337 msgid "A locally running CUPS daemon is needed." msgstr "로컬에서 실행 중인 CUPS 데몬이 필요합니다." -#: src/modules/Printerlib.rb:343 +#: src/modules/Printerlib.rb:343 msgid "Failed to start the CUPS daemon" msgstr "CUPS 데몬을 시작하지 못했습니다." -#: src/modules/Printerlib.rb:383 src/modules/Printerlib.rb:432 +#: src/modules/Printerlib.rb:383 src/modules/Printerlib.rb:432 msgid "No locally running CUPS daemon is accessible." msgstr "로컬에서 실행 중인 CUPS 데몬에 액세스할 수 없습니다." -#: src/modules/Printerlib.rb:388 src/modules/Printerlib.rb:445 +#: src/modules/Printerlib.rb:388 src/modules/Printerlib.rb:445 msgid "Failed to enable starting of the CUPS daemon during system boot" msgstr "시스템 부팅 도중 CUPS 데몬 시작을 활성화하지 못했습니다." -#. to be on the safe side regarding complaints in an enterprise environment -#. because a restart disrupts all currently actively printing jobs: -#: src/modules/Printerlib.rb:400 +#. to be on the safe side regarding complaints in an enterprise environment +#. because a restart disrupts all currently actively printing jobs: +#: src/modules/Printerlib.rb:400 msgid "Restart locally running CUPS daemon" msgstr "로컬에서 실행 중인 CUPS 데몬 다시 시작" -#. PopupYesNoHeadline body: -#: src/modules/Printerlib.rb:402 +#. PopupYesNoHeadline body: +#: src/modules/Printerlib.rb:402 msgid "A restart disrupts all currently active print jobs." msgstr "다시 시작하면 현재 활성 출력 작업이 모두 중단됩니다." -#: src/modules/Printerlib.rb:408 +#: src/modules/Printerlib.rb:408 msgid "Failed to restart the CUPS daemon" msgstr "CUPS 데몬을 재시작하지 못했습니다." -#. Wait half a minute for a restarted cupsd is necessary because -#. when a "no Browsing info" config is switched to a "get Browsing info" config -#. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds -#. so that the local cupsd should listen at least 31 seconds to get Browsing info -#. before e.g. the Overview dialog can be shown with the right current queues. -#: src/modules/Printerlib.rb:423 +#. Wait half a minute for a restarted cupsd is necessary because +#. when a "no Browsing info" config is switched to a "get Browsing info" config +#. the BrowseInterval in cupsd.conf on remote CUPS servers is by default 30 seconds +#. so that the local cupsd should listen at least 31 seconds to get Browsing info +#. before e.g. the Overview dialog can be shown with the right current queues. +#: src/modules/Printerlib.rb:423 msgid "" "Restarted the CUPS daemon.\n" "Waiting half a minute for the CUPS daemon to get ready to operate...\n" @@ -4740,44 +4588,44 @@ "CUPS 데몬을 다시 시작했습니다.\n" "CUPS 데몬이 작동할 준비가 되도록 30분 동안 기다리는 중입니다.\n" -#. To be on the safe side, ask the user to enable the cupsd -#. to be started during boot if it is not yet enabled: -#: src/modules/Printerlib.rb:439 +#. To be on the safe side, ask the user to enable the cupsd +#. to be started during boot if it is not yet enabled: +#: src/modules/Printerlib.rb:439 msgid "Enable starting of the CUPS daemon during system boot" msgstr "시스템 부팅 중 CUPS 데몬 시작 활성화" -#. PopupYesNoHeadline body: -#: src/modules/Printerlib.rb:441 +#. PopupYesNoHeadline body: +#: src/modules/Printerlib.rb:441 msgid "Currently the CUPS daemon is not started during system boot." msgstr "현재 CUPS 데몬은 시스템 부팅 도중 시작되지 않습니다." -#. to be on the safe side regarding complaints in an enterprise environment -#. because a stop disrupts all currently actively printing jobs: -#: src/modules/Printerlib.rb:461 +#. to be on the safe side regarding complaints in an enterprise environment +#. because a stop disrupts all currently actively printing jobs: +#: src/modules/Printerlib.rb:461 msgid "Stop locally running CUPS daemon" msgstr "로컬에서 실행 중인 CUPS 데몬 중지" -#. PopupYesNoHeadline body: -#: src/modules/Printerlib.rb:463 +#. PopupYesNoHeadline body: +#: src/modules/Printerlib.rb:463 msgid "A stop disrupts all currently active print jobs." msgstr "중지하면 현재 활성 출력 작업이 모두 중단됩니다." -#. Wait one second to make sure that cupsd has really finished (it may do some cleanup): -#: src/modules/Printerlib.rb:479 +#. Wait one second to make sure that cupsd has really finished (it may do some cleanup): +#: src/modules/Printerlib.rb:479 msgid "A locally running CUPS daemon is still accessible." msgstr "로컬에서 실행 중인 CUPS 데몬에 여전히 액세스할 수 있습니다." -#. where %1 will be replaced by the server name. -#: src/modules/Printerlib.rb:516 +#. where %1 will be replaced by the server name. +#: src/modules/Printerlib.rb:516 msgid "The CUPS server '%1' is not accessible." msgstr "CUPS 서버 '%1'에 액세스할 수 없습니다." -#. Label for a ProgressBar while waiting for updated config files: -#: src/modules/Printerlib.rb:649 +#. Label for a ProgressBar while waiting for updated config files: +#: src/modules/Printerlib.rb:649 msgid "Updating configuration files..." msgstr "설정 파일을 업데이트중..." -#. Label for a PushButton to skip waiting for updated config files: -#: src/modules/Printerlib.rb:657 +#. Label for a PushButton to skip waiting for updated config files: +#: src/modules/Printerlib.rb:657 msgid "&Skip waiting" msgstr "대기 건너뛰기(&S)" Modified: branches/SLE12-SP3/yast/ko/po/product-creator.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/product-creator.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/product-creator.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,17 +14,17 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. transltors: command line help text for the Xproduct-creator module -#: src/clients/image-creator.rb:45 +#. transltors: command line help text for the Xproduct-creator module +#: src/clients/image-creator.rb:45 msgid "Configuration of Image Creator" msgstr "이미지 생성자 구성" -#. error popup -#. error popup -#. /bin/objcopy - binutils -#. /bin/mkzimage - lilo -#: src/clients/image-creator.rb:73 src/clients/kiwi.rb:99 -#: src/include/product-creator/wizards.rb:255 +#. error popup +#. error popup +#. /bin/objcopy - binutils +#. /bin/mkzimage - lilo +#: src/clients/image-creator.rb:73 src/clients/kiwi.rb:99 +#: src/include/product-creator/wizards.rb:255 msgid "" "Installation of required packages\n" "failed." @@ -32,207 +32,207 @@ "필요한 패키지 설치에\n" "실패했습니다." -#. command line help text for the kiwi module -#: src/clients/kiwi.rb:48 +#. command line help text for the kiwi module +#: src/clients/kiwi.rb:48 msgid "Configuration of Kiwi" msgstr "Kiwi 구성" -#. transltors: command line help text for the product-creator module -#: src/clients/product-creator.rb:54 +#. transltors: command line help text for the product-creator module +#: src/clients/product-creator.rb:54 msgid "Configuration of Product Creator" msgstr "제품 생성자 구성" -#. translators: command line help text for list action -#: src/clients/product-creator.rb:64 +#. translators: command line help text for list action +#: src/clients/product-creator.rb:64 msgid "Print existing configurations" msgstr "기존 구성 인쇄" -#. translators: command line help text for create-iso action -#: src/clients/product-creator.rb:71 +#. translators: command line help text for create-iso action +#: src/clients/product-creator.rb:71 msgid "Create installation ISO image" msgstr "설치 ISO 이미지 작성" -#. translators: command line help text for create-config action -#: src/clients/product-creator.rb:78 +#. translators: command line help text for create-config action +#: src/clients/product-creator.rb:78 msgid "Create new product configuration" msgstr "새 제품 구성 만들기" -#. translators: command line help text for delete-config action -#: src/clients/product-creator.rb:85 +#. translators: command line help text for delete-config action +#: src/clients/product-creator.rb:85 msgid "Delete existing configuration" msgstr "기존 구성 삭제" -#. translators: command line help text for delete-config action -#: src/clients/product-creator.rb:92 +#. translators: command line help text for delete-config action +#: src/clients/product-creator.rb:92 msgid "Edit existing configuration" msgstr "기존 구성 편집" -#. translators: command line help text for show action -#: src/clients/product-creator.rb:99 +#. translators: command line help text for show action +#: src/clients/product-creator.rb:99 msgid "Show the summary of selected configuration" msgstr "선택한 구성의 요약 표시" -#. translators: command line help text for the 'name' option -#: src/clients/product-creator.rb:107 +#. translators: command line help text for the 'name' option +#: src/clients/product-creator.rb:107 msgid "Name of the configuration" msgstr "구성 이름" -#. translators: command line help text for the 'passphrase' option -#: src/clients/product-creator.rb:114 +#. translators: command line help text for the 'passphrase' option +#: src/clients/product-creator.rb:114 msgid "GPG passphrase required for signing the source." msgstr "원본에 서명하려면 GPG 암호구가 필요합니다." -#. command line help text for the 'passhrase_file' option -#: src/clients/product-creator.rb:121 +#. command line help text for the 'passhrase_file' option +#: src/clients/product-creator.rb:121 msgid "File with GPG passphrase required for signing the source" msgstr "원본 서명에 필요한 GPG 암호구문이 포함된 파일" -#. cmd line help text for the 'configfile' option, %1 is a file name -#: src/clients/product-creator.rb:129 +#. cmd line help text for the 'configfile' option, %1 is a file name +#: src/clients/product-creator.rb:129 msgid "Path to the configuration file (default is %1)" msgstr "구성 파일의 경로(기본값: %1)" -#. command line help text for 'output_dir' option -#: src/clients/product-creator.rb:136 +#. command line help text for 'output_dir' option +#: src/clients/product-creator.rb:136 msgid "Path to the output directory" msgstr "출력 디렉토리 경로" -#. command line help text for 'create_iso' option -#: src/clients/product-creator.rb:144 +#. command line help text for 'create_iso' option +#: src/clients/product-creator.rb:144 msgid "Output should be an ISO image instead of directory tree" msgstr "출력은 디렉토리 트리 대신 ISO 이미지여야 합니다." -#. command line help text for 'iso_name' option -#: src/clients/product-creator.rb:150 +#. command line help text for 'iso_name' option +#: src/clients/product-creator.rb:150 msgid "Name of the output ISO image" msgstr "출력 ISO 이미지의 이름" -#. command line help text for 'savespace' option -#: src/clients/product-creator.rb:157 +#. command line help text for 'savespace' option +#: src/clients/product-creator.rb:157 msgid "Copy only needed files to save space" msgstr "필요한 파일만 복사하여 공간 절약" -#. command line help text for 'profile' option -#: src/clients/product-creator.rb:163 +#. command line help text for 'profile' option +#: src/clients/product-creator.rb:163 msgid "Path to AutoYaST profile" msgstr "AutoYaST 프로파일 경로" -#. command line help text for 'copy_profile' option -#: src/clients/product-creator.rb:170 +#. command line help text for 'copy_profile' option +#: src/clients/product-creator.rb:170 msgid "Copy AutoYaST profile to CD image" msgstr "AutoYaST 프로파일을 CD 이미지에 복사" -#. command line help text for 'isolinux_path' option -#: src/clients/product-creator.rb:176 +#. command line help text for 'isolinux_path' option +#: src/clients/product-creator.rb:176 msgid "Path to isolinux.cfg file" msgstr "isolinux.cfg 파일 경로" -#. command line help text for 'gpg_key' option -#: src/clients/product-creator.rb:183 +#. command line help text for 'gpg_key' option +#: src/clients/product-creator.rb:183 msgid "GPG key ID used to sign a product" msgstr "제품 서명에 사용된 GPG 키 ID" -#. command line help text for 'repositories' option -#: src/clients/product-creator.rb:190 +#. command line help text for 'repositories' option +#: src/clients/product-creator.rb:190 msgid "List of package repositories (separated by commas)" msgstr "패키지 리포지토리 목록(쉼표로 구분)" -#. command line error message -#. command line error message -#: src/include/product-creator/commandline.rb:79 -#: src/include/product-creator/commandline.rb:328 +#. command line error message +#. command line error message +#: src/include/product-creator/commandline.rb:79 +#: src/include/product-creator/commandline.rb:328 msgid "Configuration name is missing." msgstr "구성 이름이 없습니다." -#. command line error message, %1 is a name -#: src/include/product-creator/commandline.rb:86 +#. command line error message, %1 is a name +#: src/include/product-creator/commandline.rb:86 msgid "There is no configuration %1." msgstr "%1 구성이 없습니다." -#. command line error message -#: src/include/product-creator/commandline.rb:104 +#. command line error message +#: src/include/product-creator/commandline.rb:104 msgid "Path to output directory is missing." msgstr "출력 디렉토리 경로가 없습니다." -#. command line error message -#: src/include/product-creator/commandline.rb:116 +#. command line error message +#: src/include/product-creator/commandline.rb:116 msgid "List of package repositories is empty." msgstr "패키지 리포지토리 목록이 비어 있습니다." -#. command line error message -#: src/include/product-creator/commandline.rb:124 +#. command line error message +#: src/include/product-creator/commandline.rb:124 msgid "Path to AutoYaST profile is missing." msgstr "AutoYaST 프로파일 경로가 없습니다." -#. command line error message -#: src/include/product-creator/commandline.rb:164 +#. command line error message +#: src/include/product-creator/commandline.rb:164 msgid "File %1 does not exist." msgstr "%1 파일이 존재하지 않습니다." -#. Command line handler for Create ISO action -#: src/include/product-creator/commandline.rb:233 +#. Command line handler for Create ISO action +#: src/include/product-creator/commandline.rb:233 msgid "Loading configuration %1..." msgstr "구성 %1 로드 중..." -#. command line error message -#: src/include/product-creator/commandline.rb:240 +#. command line error message +#: src/include/product-creator/commandline.rb:240 msgid "Cannot load configuration %1." msgstr "구성 %1을(를) 로드할 수 없습니다." -#. command line error message (%1 is path) -#: src/include/product-creator/commandline.rb:290 +#. command line error message (%1 is path) +#: src/include/product-creator/commandline.rb:290 msgid "Cannot create ISO image %1." msgstr "ISO 이미지 %1을(를) 작성할 수 없습니다." -#. command line info message -#: src/include/product-creator/commandline.rb:296 +#. command line info message +#: src/include/product-creator/commandline.rb:296 msgid "ISO image %1 has been written." msgstr "ISO 이미지 %1이(가) 작성되었습니다." -#. command line error message -#: src/include/product-creator/commandline.rb:303 +#. command line error message +#: src/include/product-creator/commandline.rb:303 msgid "Configuration name cannot be empty." msgstr "구성 이름은 비워 둘 수 없습니다." -#. summary caption -#. summary caption -#: src/include/product-creator/commandline.rb:354 -#: src/include/product-creator/complex.rb:531 -#: src/include/product-creator/dialogs.rb:1907 +#. summary caption +#. summary caption +#: src/include/product-creator/commandline.rb:354 +#: src/include/product-creator/complex.rb:531 +#: src/include/product-creator/dialogs.rb:1907 msgid "Package Source" msgstr "패키지 소스" -#. summary line (%1 is file path) -#: src/include/product-creator/commandline.rb:369 +#. summary line (%1 is file path) +#: src/include/product-creator/commandline.rb:369 msgid "Using AutoYaST profile %1" msgstr "AutoYaST 프로파일 %1 사용 중" -#. summary line (%1/%2 is file path) -#. summary line (%1/%2 is file path) -#: src/include/product-creator/commandline.rb:380 -#: src/include/product-creator/dialogs.rb:1945 +#. summary line (%1/%2 is file path) +#. summary line (%1/%2 is file path) +#: src/include/product-creator/commandline.rb:380 +#: src/include/product-creator/dialogs.rb:1945 msgid "Creating ISO image %1/%2" msgstr "ISO 이미지 %1/%2 만드는 중..." -#. summary line (%1/%2 is file path) -#: src/include/product-creator/commandline.rb:389 +#. summary line (%1/%2 is file path) +#: src/include/product-creator/commandline.rb:389 msgid "Creating directory tree in %1/%2" msgstr "%1/%2에 디렉토리 트리를 만드는 중" -#. summary text - %1 is GPG key ID (e.g. ABCDEF01), %2 is GPG key user ID (or empty if not defined) -#: src/include/product-creator/commandline.rb:412 +#. summary text - %1 is GPG key ID (e.g. ABCDEF01), %2 is GPG key user ID (or empty if not defined) +#: src/include/product-creator/commandline.rb:412 msgid "Digitally sign the medium with GPG key %1%2" msgstr "GPG 키 %1%2을(를) 사용하여 미디어에 디지털 서명" -#. summary text -#. summary text -#: src/include/product-creator/commandline.rb:419 -#: src/include/product-creator/dialogs.rb:1993 +#. summary text +#. summary text +#: src/include/product-creator/commandline.rb:419 +#: src/include/product-creator/dialogs.rb:1993 msgid "The medium will not be digitally signed" msgstr "매체가 디지털 방식으로 서명되지 않습니다." -#. error message: %1 and %2 are architecture names like i386, x86_64, ppc... -#: src/include/product-creator/complex.rb:100 +#. error message: %1 and %2 are architecture names like i386, x86_64, ppc... +#: src/include/product-creator/complex.rb:100 msgid "" "Target architecture of the current configuration (%1)\n" "does not match the system architecture (%2).\n" @@ -244,83 +244,83 @@ "\n" "KIWI에서 다른 아키텍처에 대해 이미지를 생성할 수 없습니다." -#. ProductCreator overview dialog caption -#: src/include/product-creator/complex.rb:133 +#. ProductCreator overview dialog caption +#: src/include/product-creator/complex.rb:133 msgid "Product Creator Configuration Overview" msgstr "Product Creator 구성 개요" -#. Table header -#: src/include/product-creator/complex.rb:146 -#: src/include/product-creator/complex.rb:812 -#: src/include/product-creator/dialogs.rb:812 +#. Table header +#: src/include/product-creator/complex.rb:146 +#: src/include/product-creator/complex.rb:812 +#: src/include/product-creator/dialogs.rb:812 msgid "Name" msgstr "이름" -#: src/include/product-creator/complex.rb:146 +#: src/include/product-creator/complex.rb:146 msgid "Product" msgstr "제품" -#: src/include/product-creator/complex.rb:146 +#: src/include/product-creator/complex.rb:146 msgid "Image" msgstr "이미지" -#: src/include/product-creator/complex.rb:146 +#: src/include/product-creator/complex.rb:146 msgid "GPG Key" msgstr "GPG 키" -#. push button label -#. combo box item -#. combo box item -#: src/include/product-creator/complex.rb:156 -#: src/include/product-creator/kiwi_dialogs.rb:3004 -#: src/include/product-creator/kiwi_dialogs.rb:3024 +#. push button label +#. combo box item +#. combo box item +#: src/include/product-creator/complex.rb:156 +#: src/include/product-creator/kiwi_dialogs.rb:3004 +#: src/include/product-creator/kiwi_dialogs.rb:3024 msgid "Xen Image" msgstr "Xen 이미지" -#. push button label -#. button label -#. combo box item -#. combo box item -#: src/include/product-creator/complex.rb:158 -#: src/include/product-creator/kiwi_dialogs.rb:2915 -#: src/include/product-creator/kiwi_dialogs.rb:3006 -#: src/include/product-creator/kiwi_dialogs.rb:3026 +#. push button label +#. button label +#. combo box item +#. combo box item +#: src/include/product-creator/complex.rb:158 +#: src/include/product-creator/kiwi_dialogs.rb:2915 +#: src/include/product-creator/kiwi_dialogs.rb:3006 +#: src/include/product-creator/kiwi_dialogs.rb:3026 msgid "Virtual Disk Image" msgstr "가상 디스크 이미지" -#. push box item -#. combo box item -#. combo box item -#: src/include/product-creator/complex.rb:165 -#: src/include/product-creator/kiwi_dialogs.rb:3014 -#: src/include/product-creator/kiwi_dialogs.rb:3022 +#. push box item +#. combo box item +#. combo box item +#: src/include/product-creator/complex.rb:165 +#: src/include/product-creator/kiwi_dialogs.rb:3014 +#: src/include/product-creator/kiwi_dialogs.rb:3022 msgid "Live ISO Image" msgstr "라이브 ISO 이미지" -#. menu button label -#: src/include/product-creator/complex.rb:175 +#. menu button label +#: src/include/product-creator/complex.rb:175 msgid "&Create Product..." msgstr "제품 생성(&C)..." -#. button label -#: src/include/product-creator/complex.rb:178 +#. button label +#: src/include/product-creator/complex.rb:178 msgid "ISO Image" msgstr "ISO 이미지" -#. button label -#: src/include/product-creator/complex.rb:180 +#. button label +#: src/include/product-creator/complex.rb:180 msgid "Directory Tree" msgstr "디렉토리 트리" -#. menu button label -#: src/include/product-creator/complex.rb:186 +#. menu button label +#: src/include/product-creator/complex.rb:186 msgid "Cre&ate Image with KIWI..." msgstr "KIWI로 이미지 작성(&A)..." -#. TreeDialog -#. Dialog for creating the skeleton and copying common data. -#. @return [Symbol] -#: src/include/product-creator/complex.rb:327 +#. TreeDialog +#. Dialog for creating the skeleton and copying common data. +#. @return [Symbol] +#: src/include/product-creator/complex.rb:327 msgid "" "<P>Creating the directory structure for the new ISO image.</P>\n" " \n" @@ -328,108 +328,108 @@ "<P>새 ISO 이미지에 대한 디렉토리 구조 생성</P>\n" " \n" -#: src/include/product-creator/complex.rb:332 +#: src/include/product-creator/complex.rb:332 msgid "<p>Press <b>Next</b> to start creating the ISO file.</p>" msgstr "<p>ISO파일을 생성하기 위해서 <b>다음</b>을 선택하십시오.</p>" -#: src/include/product-creator/complex.rb:338 +#: src/include/product-creator/complex.rb:338 msgid "Create skeleton with common files" msgstr "공용 파일을 사용하여 기본 디렉토리를 만듭니다." -#: src/include/product-creator/complex.rb:339 +#: src/include/product-creator/complex.rb:339 msgid "Copy additional and customized files" msgstr "사용자 정의 파일 및 추가 파일을 복사합니다." -#: src/include/product-creator/complex.rb:340 +#: src/include/product-creator/complex.rb:340 msgid "Copy selected packages" msgstr "선택한 패키지 복사" -#: src/include/product-creator/complex.rb:344 +#: src/include/product-creator/complex.rb:344 msgid "Creating skeleton with essential files" msgstr "최소파일을 사용해 기본사항을 생성중" -#: src/include/product-creator/complex.rb:345 +#: src/include/product-creator/complex.rb:345 msgid "Copying additional and customized files to directory tree..." msgstr "사용자 정의 파일 및 추가 파일을 디렉토리 트리에 복사하는 중..." -#: src/include/product-creator/complex.rb:346 +#: src/include/product-creator/complex.rb:346 msgid "Copying selected packages" msgstr "선택한 패키지를 복사중" -#. label -#: src/include/product-creator/complex.rb:354 +#. label +#: src/include/product-creator/complex.rb:354 msgid "Sign the source with a GPG key" msgstr "GPG 키를 사용하여 원본에 서명" -#. progressbar label -#: src/include/product-creator/complex.rb:359 +#. progressbar label +#: src/include/product-creator/complex.rb:359 msgid "Signing the source with a GPG key..." msgstr "GPG 키를 사용하여 원본에 서명 중..." -#. label -#: src/include/product-creator/complex.rb:365 +#. label +#: src/include/product-creator/complex.rb:365 msgid "Disable signature checks in linuxrc" msgstr "linuxrc에서 서명 확인 비활성화" -#. progressbar label -#: src/include/product-creator/complex.rb:370 +#. progressbar label +#: src/include/product-creator/complex.rb:370 msgid "Disabling signature checks in linuxrc..." msgstr "linuxrc에서 서명 확인 비활성화 중..." -#: src/include/product-creator/complex.rb:375 +#: src/include/product-creator/complex.rb:375 msgid "Creating ISO image directory..." msgstr "ISO 이미지 디렉토리를 생성하는 중..." -#. redirect the download callbacks -#: src/include/product-creator/complex.rb:404 +#. redirect the download callbacks +#: src/include/product-creator/complex.rb:404 msgid "Error while creating skeleton." msgstr "기본 디렉토리를 생성하는 동안 오류가 발생했습니다." -#: src/include/product-creator/complex.rb:449 +#: src/include/product-creator/complex.rb:449 msgid "ISO image directory ready" msgstr "ISO 이미지 디렉토리 준비" -#. if (!Mode::commandline()) -#. { -#. Wizard::EnableNextButton(); -#. Wizard::RestoreNextButton(); -#. } -#: src/include/product-creator/complex.rb:495 +#. if (!Mode::commandline()) +#. { +#. Wizard::EnableNextButton(); +#. Wizard::RestoreNextButton(); +#. } +#: src/include/product-creator/complex.rb:495 msgid "Creating CD Image..." msgstr "CD 이미지 생성 중..." -#: src/include/product-creator/complex.rb:496 +#: src/include/product-creator/complex.rb:496 msgid "This may take a while." msgstr "이 작업은 시간이 걸릴 수도 있습니다." -#. caption -#: src/include/product-creator/complex.rb:530 +#. caption +#: src/include/product-creator/complex.rb:530 msgid "ISO Summary" msgstr "ISO 요약" -#. frame label -#. summary caption -#. richtext header -#. richtext header -#: src/include/product-creator/complex.rb:537 -#: src/include/product-creator/dialogs.rb:261 -#: src/include/product-creator/dialogs.rb:1914 -#: src/include/product-creator/kiwi_dialogs.rb:343 -#: src/include/product-creator/kiwi_dialogs.rb:373 +#. frame label +#. summary caption +#. richtext header +#. richtext header +#: src/include/product-creator/complex.rb:537 +#: src/include/product-creator/dialogs.rb:261 +#: src/include/product-creator/dialogs.rb:1914 +#: src/include/product-creator/kiwi_dialogs.rb:343 +#: src/include/product-creator/kiwi_dialogs.rb:373 msgid "Packages" msgstr "패키지" -#: src/include/product-creator/complex.rb:548 +#: src/include/product-creator/complex.rb:548 msgid "Missing Packages" msgstr "빠진 패키지들" -#. combo box label -#: src/include/product-creator/complex.rb:552 -#: src/include/product-creator/kiwi_dialogs.rb:129 +#. combo box label +#: src/include/product-creator/complex.rb:552 +#: src/include/product-creator/kiwi_dialogs.rb:129 msgid "None" msgstr "없음" -#: src/include/product-creator/complex.rb:557 +#: src/include/product-creator/complex.rb:557 msgid "" "<p>Verify the data in the summary box then\n" "press Finish to return to main dialog.</p>\n" @@ -437,12 +437,12 @@ "<p>요약 상자에서 데이터를 확인한 후\n" "[완료]를 눌러 기본 대화 상자로 돌아가십시오.</p>\n" -#. caption -#: src/include/product-creator/complex.rb:583 +#. caption +#: src/include/product-creator/complex.rb:583 msgid "Custom CDs" msgstr "사용자 정의 CDs" -#: src/include/product-creator/complex.rb:585 +#: src/include/product-creator/complex.rb:585 msgid "" "<p>Verifying data and packages...\n" " </p>\n" @@ -452,7 +452,7 @@ " </p>\n" " \n" -#: src/include/product-creator/complex.rb:592 +#: src/include/product-creator/complex.rb:592 msgid "" "<p>If there is something missing, the process will be aborted.\n" "Fix the problem and try again.</p>\n" @@ -462,165 +462,158 @@ "문제를 해결하고 다시 시도하십시오.</p>\n" " " -#: src/include/product-creator/complex.rb:600 +#: src/include/product-creator/complex.rb:600 msgid "Set up Package Source" msgstr "패키지 소스를 설정합니다." -#: src/include/product-creator/complex.rb:601 +#: src/include/product-creator/complex.rb:601 msgid "Create Package List" msgstr "패키지 목록 생성" -#: src/include/product-creator/complex.rb:602 +#: src/include/product-creator/complex.rb:602 msgid "Verify Package Availability" msgstr "패키지 유효성 확인" -#: src/include/product-creator/complex.rb:603 +#: src/include/product-creator/complex.rb:603 msgid "Check Destination" msgstr "대상 검사" -#: src/include/product-creator/complex.rb:607 +#: src/include/product-creator/complex.rb:607 msgid "Configuring package source..." msgstr "패키지 소스 구성 중..." -#: src/include/product-creator/complex.rb:608 +#: src/include/product-creator/complex.rb:608 msgid "Creating package list..." msgstr "패키지 목록 생성중..." -#: src/include/product-creator/complex.rb:609 +#: src/include/product-creator/complex.rb:609 msgid "Verifying package availability..." msgstr "패키지 유효성을 검사중..." -#: src/include/product-creator/complex.rb:610 +#: src/include/product-creator/complex.rb:610 msgid "Checking destination..." msgstr "대상 검사 중..." -#: src/include/product-creator/complex.rb:614 +#: src/include/product-creator/complex.rb:614 msgid "Verification of Data for ISO Image" msgstr "ISO 이미지 데이터 확인" -#. SCR::Execute(.target.mkdir, tmp + "/tmproot"); -#. Pkg::TargetInit( tmp + "/tmproot" , true); -#: src/include/product-creator/complex.rb:636 +#. SCR::Execute(.target.mkdir, tmp + "/tmproot"); +#. Pkg::TargetInit( tmp + "/tmproot" , true); +#: src/include/product-creator/complex.rb:636 msgid "Enabling sources..." msgstr "원본 활성화 중..." -#: src/include/product-creator/complex.rb:645 +#: src/include/product-creator/complex.rb:645 msgid "Selecting packages..." msgstr "패키지 선택 중..." -#. the solver has failed, let the user resolve the dependencies -#: src/include/product-creator/complex.rb:667 +#. the solver has failed, let the user resolve the dependencies +#: src/include/product-creator/complex.rb:667 msgid "Checking packages..." msgstr "패키지 확인 중..." -#: src/include/product-creator/complex.rb:675 +#: src/include/product-creator/complex.rb:675 msgid "Verifying the destination directory..." msgstr "대상 디렉토리 확인 중..." -#. help text -#: src/include/product-creator/complex.rb:785 +#. help text +#: src/include/product-creator/complex.rb:785 msgid "<p>Start creating a new image configuration with <b>Add</b>.</p>" msgstr "<p><b>추가</b>를 사용하여 새 이미지 구성 생성을 시작하십시오.</p>" -#. help text -#: src/include/product-creator/complex.rb:787 -msgid "" -"<p>Use <b>Edit</b> to change selected image configuration or create the " -"image.</p>" -msgstr "" -"<p><b>편집</b>을 사용하여 선택된 이미지 구성을 변경하거나 이미지를 작성합니" -"다." +#. help text +#: src/include/product-creator/complex.rb:787 +msgid "<p>Use <b>Edit</b> to change selected image configuration or create the image.</p>" +msgstr "<p><b>편집</b>을 사용하여 선택된 이미지 구성을 변경하거나 이미지를 작성합니다." -#. help text -#: src/include/product-creator/complex.rb:791 -msgid "" -"<p>Delete the directory with the selected configuration by selecting " -"<b>Delete</b>.</p>" -msgstr "" -"<p><b>삭제</b>를 선택하여 선택한 구성이 포함된 디렉토리를 삭제하십시오.</p>" +#. help text +#: src/include/product-creator/complex.rb:791 +msgid "<p>Delete the directory with the selected configuration by selecting <b>Delete</b>.</p>" +msgstr "<p><b>삭제</b>를 선택하여 선택한 구성이 포함된 디렉토리를 삭제하십시오.</p>" -#. help text, %1 is directory -#: src/include/product-creator/complex.rb:796 +#. help text, %1 is directory +#: src/include/product-creator/complex.rb:796 msgid "<p>All image configurations are saved in <tt>%1</tt> directory.</p>" msgstr "<p>모든 이미지 구성은 <tt>%1</tt> 디렉토리에 저장됩니다.</p>" -#. main dialog caption -#: src/include/product-creator/complex.rb:804 +#. main dialog caption +#: src/include/product-creator/complex.rb:804 msgid "Image Creator Configuration Overview" msgstr "Image Creator 구성 개요" -#: src/include/product-creator/complex.rb:812 +#: src/include/product-creator/complex.rb:812 msgid "Version" msgstr "버전" -#: src/include/product-creator/complex.rb:812 +#: src/include/product-creator/complex.rb:812 msgid "Size" msgstr "크기" -#. yes/no popup -#: src/include/product-creator/complex.rb:881 +#. yes/no popup +#: src/include/product-creator/complex.rb:881 msgid "Delete configuration %1 (%2) now?" msgstr "지금 %1(%2) 구성을 삭제하시겠습니까?" -#. corresponds to the "Enable/Disable" button -#. corresponds to the "Enable/Disable" button -#: src/include/product-creator/dialogs.rb:80 -#: src/include/product-creator/dialogs.rb:94 +#. corresponds to the "Enable/Disable" button +#. corresponds to the "Enable/Disable" button +#: src/include/product-creator/dialogs.rb:80 +#: src/include/product-creator/dialogs.rb:94 msgid "On" msgstr "설정" -#: src/include/product-creator/dialogs.rb:81 -#: src/include/product-creator/dialogs.rb:95 +#: src/include/product-creator/dialogs.rb:81 +#: src/include/product-creator/dialogs.rb:95 msgid "Off" msgstr "해제" -#. ProductCreator configure1 dialog caption -#. ProductCreator configure2 dialog caption -#. dialog caption -#: src/include/product-creator/dialogs.rb:168 -#: src/include/product-creator/dialogs.rb:394 -#: src/include/product-creator/dialogs.rb:1226 +#. ProductCreator configure1 dialog caption +#. ProductCreator configure2 dialog caption +#. dialog caption +#: src/include/product-creator/dialogs.rb:168 +#: src/include/product-creator/dialogs.rb:394 +#: src/include/product-creator/dialogs.rb:1226 msgid "Product Creator Configuration" msgstr "Product Creator 구성" -#. text entry label -#: src/include/product-creator/dialogs.rb:202 +#. text entry label +#: src/include/product-creator/dialogs.rb:202 msgid "Profile Loca&tion:" msgstr "프로파일 위치(&T):" -#. push button label -#: src/include/product-creator/dialogs.rb:209 +#. push button label +#: src/include/product-creator/dialogs.rb:209 msgid "Select Fi&le" msgstr "파일 선택(&L)" -#. check box label -#: src/include/product-creator/dialogs.rb:218 +#. check box label +#: src/include/product-creator/dialogs.rb:218 msgid "Copy Profile to CD I&mage" msgstr "CD 이미지에 프로파일 복사(&M)" -#. radio button label -#: src/include/product-creator/dialogs.rb:232 +#. radio button label +#: src/include/product-creator/dialogs.rb:232 msgid "Pac&kage Manager" msgstr "패키지 관리자(&K)" -#. radio button label -#: src/include/product-creator/dialogs.rb:241 +#. radio button label +#: src/include/product-creator/dialogs.rb:241 msgid "&AutoYaST Control File" msgstr "AutoYaST 제어 파일(&A)" -#. text entry label -#: src/include/product-creator/dialogs.rb:257 +#. text entry label +#: src/include/product-creator/dialogs.rb:257 msgid "&Configuration Name:" msgstr "구성 이름(&C):" -#. set architecture if configured -#. error popup -#: src/include/product-creator/dialogs.rb:313 -#: src/include/product-creator/kiwi_dialogs.rb:3512 +#. set architecture if configured +#. error popup +#: src/include/product-creator/dialogs.rb:313 +#: src/include/product-creator/kiwi_dialogs.rb:3512 msgid "Enter the name of the configuration." msgstr "구성 이름을 입력하십시오." -#: src/include/product-creator/dialogs.rb:319 +#: src/include/product-creator/dialogs.rb:319 msgid "" "A configuration with this name already exists.\n" " Select a new name.\n" @@ -628,86 +621,86 @@ "이름이 같은 구성이 이미 있습니다.\n" " 새 이름을 선택하십시오.\n" -#. error message -#: src/include/product-creator/dialogs.rb:344 +#. error message +#: src/include/product-creator/dialogs.rb:344 msgid "The file '%1' does not exist. Choose a correct one." msgstr "'%1' 파일이 없습니다. 올바른 파일을 선택하십시오." -#. abort? -#: src/include/product-creator/dialogs.rb:369 -#: src/include/product-creator/dialogs.rb:1263 +#. abort? +#: src/include/product-creator/dialogs.rb:369 +#: src/include/product-creator/dialogs.rb:1263 msgid "Select File" msgstr "파일 선택" -#. frame label -#: src/include/product-creator/dialogs.rb:415 +#. frame label +#: src/include/product-creator/dialogs.rb:415 msgid "Output:" msgstr "출력:" -#. text entry label -#: src/include/product-creator/dialogs.rb:423 +#. text entry label +#: src/include/product-creator/dialogs.rb:423 msgid "&Path to Generated Directory Tree:" msgstr "생성된 디렉토리 트리의 경로(&P):" -#. push button label -#: src/include/product-creator/dialogs.rb:430 +#. push button label +#: src/include/product-creator/dialogs.rb:430 msgid "&Select Directory" msgstr "디렉토리 선택(&S)" -#. radio button label -#: src/include/product-creator/dialogs.rb:443 +#. radio button label +#: src/include/product-creator/dialogs.rb:443 msgid "&Generate ISO Image File" msgstr "ISO 이미지 파일 생성(&G)" -#. text entry label -#: src/include/product-creator/dialogs.rb:459 +#. text entry label +#: src/include/product-creator/dialogs.rb:459 msgid "&ISO Image File:" msgstr "ISO 이미지 파일(&I):" -#. radio button label -#: src/include/product-creator/dialogs.rb:473 +#. radio button label +#: src/include/product-creator/dialogs.rb:473 msgid "Create Directory &Tree Only" msgstr "디렉토리 트리만 생성(&T)" -#. frame label -#: src/include/product-creator/dialogs.rb:484 +#. frame label +#: src/include/product-creator/dialogs.rb:484 msgid "Other Options" msgstr "기타 옵션" -#. check box label -#: src/include/product-creator/dialogs.rb:490 +#. check box label +#: src/include/product-creator/dialogs.rb:490 msgid "Copy only needed files to save space." msgstr "필요한 파일만 복사하여 공간을 절약합니다." -#. text entry label -#: src/include/product-creator/dialogs.rb:500 +#. text entry label +#: src/include/product-creator/dialogs.rb:500 msgid "CD Publisher:" msgstr "CD Publisher:" -#. text entry label -#: src/include/product-creator/dialogs.rb:509 +#. text entry label +#: src/include/product-creator/dialogs.rb:509 msgid "CD Preparer:" msgstr "CD Preparer:" -#. ask for directory widget label -#: src/include/product-creator/dialogs.rb:549 +#. ask for directory widget label +#: src/include/product-creator/dialogs.rb:549 msgid "Select Directory" msgstr "디렉토리 선택" -#. error popup -#: src/include/product-creator/dialogs.rb:562 +#. error popup +#: src/include/product-creator/dialogs.rb:562 msgid "Path to generated directory tree missing." msgstr "생성된 디렉토리 트리의 경로가 없습니다." -#. preselect the first item -#: src/include/product-creator/dialogs.rb:646 +#. preselect the first item +#: src/include/product-creator/dialogs.rb:646 msgid "Target Architecture" msgstr "대상 아키텍처" -#. the architecture is different, ask to switch it -#. %1 is URL of the repository -#. %2 is name of the architecture (like i386, x86_64, ppc...) -#: src/include/product-creator/dialogs.rb:774 +#. the architecture is different, ask to switch it +#. %1 is URL of the repository +#. %2 is name of the architecture (like i386, x86_64, ppc...) +#: src/include/product-creator/dialogs.rb:774 msgid "" "Source %1\n" "does not support the current target architecture (%2).\n" @@ -717,56 +710,56 @@ "아키텍처(%2)를 지원하지 않습니다.\n" "대상 아키텍처를 변경하시겠습니까?\n" -#. dialog caption -#: src/include/product-creator/dialogs.rb:801 +#. dialog caption +#: src/include/product-creator/dialogs.rb:801 msgid "Source Selection" msgstr "원본 선택" -#: src/include/product-creator/dialogs.rb:812 +#: src/include/product-creator/dialogs.rb:812 msgid "Selected" msgstr "선택됨" -#: src/include/product-creator/dialogs.rb:812 +#: src/include/product-creator/dialogs.rb:812 msgid "Status" msgstr "상태" -#: src/include/product-creator/dialogs.rb:812 +#: src/include/product-creator/dialogs.rb:812 msgid "URL" msgstr "URL" -#. summary line, %1 is e.g. i386, x86_64, ppc... -#: src/include/product-creator/dialogs.rb:823 -#: src/include/product-creator/dialogs.rb:1933 +#. summary line, %1 is e.g. i386, x86_64, ppc... +#: src/include/product-creator/dialogs.rb:823 +#: src/include/product-creator/dialogs.rb:1933 msgid "Target architecture: %1" msgstr "대상 아키텍처: %1" -#. push button label -#: src/include/product-creator/dialogs.rb:836 +#. push button label +#: src/include/product-creator/dialogs.rb:836 msgid "Cr&eate New..." msgstr "새로 작성(&E)..." -#. remove not found sources (with id = -1) -#. enable the source -#. disable the source -#: src/include/product-creator/dialogs.rb:862 -#: src/include/product-creator/dialogs.rb:901 -#: src/include/product-creator/dialogs.rb:949 +#. remove not found sources (with id = -1) +#. enable the source +#. disable the source +#: src/include/product-creator/dialogs.rb:862 +#: src/include/product-creator/dialogs.rb:901 +#: src/include/product-creator/dialogs.rb:949 msgid "X" msgstr "X" -#. refresh the target architecture if it has been changed -#. change the architecture -#: src/include/product-creator/dialogs.rb:909 -#: src/include/product-creator/dialogs.rb:1081 +#. refresh the target architecture if it has been changed +#. change the architecture +#: src/include/product-creator/dialogs.rb:909 +#: src/include/product-creator/dialogs.rb:1081 msgid "Target Architecture: %1" msgstr "대상 아키텍처: %1" -#: src/include/product-creator/dialogs.rb:970 +#: src/include/product-creator/dialogs.rb:970 msgid "Select at least one source." msgstr "원본을 최소한 하나 이상 선택하십시오." -#. error message -#: src/include/product-creator/dialogs.rb:1005 +#. error message +#: src/include/product-creator/dialogs.rb:1005 msgid "" "There is a mismatch between the selected\n" "repositories and the machine architecture.\n" @@ -780,62 +773,61 @@ "다른 리포지토리를 선택하거나\n" "대상 아키텍처를 변경하십시오.\n" -#. ask for the target architecture -#: src/include/product-creator/dialogs.rb:1048 +#. ask for the target architecture +#: src/include/product-creator/dialogs.rb:1048 msgid "Select the new target architecture." msgstr "새 대상 아키텍처를 선택합니다." -#. dialog caption -#: src/include/product-creator/dialogs.rb:1142 +#. dialog caption +#: src/include/product-creator/dialogs.rb:1142 msgid "Base Source Selection" msgstr "기본 원본 선택" -#. convert the URL to Id -#: src/include/product-creator/dialogs.rb:1170 +#. convert the URL to Id +#: src/include/product-creator/dialogs.rb:1170 msgid "Selected Base Source" msgstr "선택한 기본 원본" -#. FIXME: Manage files for other archs -#: src/include/product-creator/dialogs.rb:1237 +#. FIXME: Manage files for other archs +#: src/include/product-creator/dialogs.rb:1237 msgid "File Contents: %1" msgstr "파일 내용: %1" -#: src/include/product-creator/dialogs.rb:1240 +#: src/include/product-creator/dialogs.rb:1240 msgid "Load File" msgstr "파일 로드" -#. Pkg::TargetFinish (); -#. busy message -#: src/include/product-creator/dialogs.rb:1300 -#: src/include/product-creator/dialogs.rb:1525 -#: src/modules/ProductCreator.rb:295 +#. Pkg::TargetFinish (); +#. busy message +#: src/include/product-creator/dialogs.rb:1300 +#: src/include/product-creator/dialogs.rb:1525 +#: src/modules/ProductCreator.rb:295 msgid "Reading data from Package Database..." msgstr "패키지 데이터베이스에서 데이터를 읽는 중..." -#. popup -#: src/include/product-creator/dialogs.rb:1301 -#: src/include/product-creator/dialogs.rb:1526 -#: src/include/product-creator/kiwi_dialogs.rb:1477 -#: src/include/product-creator/kiwi_dialogs.rb:1822 -#: src/include/product-creator/kiwi_dialogs.rb:3131 -#: src/modules/ProductCreator.rb:300 +#. popup +#: src/include/product-creator/dialogs.rb:1301 +#: src/include/product-creator/dialogs.rb:1526 +#: src/include/product-creator/kiwi_dialogs.rb:1477 +#: src/include/product-creator/kiwi_dialogs.rb:1822 +#: src/include/product-creator/kiwi_dialogs.rb:3131 +#: src/modules/ProductCreator.rb:300 msgid "Please wait..." msgstr "잠시 기다리십시오..." -#. Open empty dialog for instant feedback -#: src/include/product-creator/dialogs.rb:1406 -#: src/include/product-creator/dialogs.rb:1540 +#. Open empty dialog for instant feedback +#: src/include/product-creator/dialogs.rb:1406 +#: src/include/product-creator/dialogs.rb:1540 msgid "Reading package database..." msgstr "패키지 데이타베이스 읽고있는 중..." -#. switch to packager textdomain, reuse the translations -#. Help text for software patterns / selections dialog -#: src/include/product-creator/dialogs.rb:1438 -#: src/include/product-creator/dialogs.rb:1515 +#. switch to packager textdomain, reuse the translations +#. Help text for software patterns / selections dialog +#: src/include/product-creator/dialogs.rb:1438 +#: src/include/product-creator/dialogs.rb:1515 msgid "" "<p>\n" -"Select one of the following <b>base</b> selections and click <i>Detailed<i> " -"to add\n" +"Select one of the following <b>base</b> selections and click <i>Detailed<i> to add\n" "more <b>add-on</b> selections and packages.\n" "</p>" msgstr "" @@ -844,15 +836,15 @@ "<b>추가</b> 선택 항목 및 패키지를 추가할 수 있습니다.\n" "</p>" -#. dialog caption -#. dialog caption -#: src/include/product-creator/dialogs.rb:1447 -#: src/include/product-creator/dialogs.rb:1513 +#. dialog caption +#. dialog caption +#: src/include/product-creator/dialogs.rb:1447 +#: src/include/product-creator/dialogs.rb:1513 msgid "Software Selection" msgstr "소프트웨어 선택" -#. error message, %1 = details -#: src/include/product-creator/dialogs.rb:1606 +#. error message, %1 = details +#: src/include/product-creator/dialogs.rb:1606 msgid "" "Dependencies cannot be resolved.\n" "\n" @@ -862,80 +854,74 @@ "\n" "%1\n" -#. refresh table and pushbutton state -#: src/include/product-creator/dialogs.rb:1825 +#. refresh table and pushbutton state +#: src/include/product-creator/dialogs.rb:1825 msgid "&Digitally Sign the Product on the Medium" msgstr "매체의 제품에 디지털 서명(&D)" -#. TODO: validate the dialog (is a key selected if the checkbox is selected? -#. "validate_help" : _("Select a gpg key in the table. Create...") -#: src/include/product-creator/dialogs.rb:1833 +#. TODO: validate the dialog (is a key selected if the checkbox is selected? +#. "validate_help" : _("Select a gpg key in the table. Create...") +#: src/include/product-creator/dialogs.rb:1833 msgid "" "<p><big><b>Sign</b></big><br>\n" -"To make it possible for users to verify your product, sign it with a GPG " -"key. \n" +"To make it possible for users to verify your product, sign it with a GPG key. \n" "This key is checked when the product is added as a repository.</p>" msgstr "" "<p><big><b>서명</b></big><br>\n" "사용자가 제품을 검증할 수 있도록 GPG 키로 제품에 서명하십시오. \n" "이 키는 제품이 리포지토리로 추가될 때 확인됩니다.</p>" -#. part of the help text (signing dialog), the URL can be modified to the translated language -#. (if the page exists in that language, you have to check that!) -#: src/include/product-creator/dialogs.rb:1840 +#. part of the help text (signing dialog), the URL can be modified to the translated language +#. (if the page exists in that language, you have to check that!) +#: src/include/product-creator/dialogs.rb:1840 msgid "" -"<P>If the product is not signed, Yast automatically adds the option " -"'Insecure:\n" -"1' to the linuxrc configuration file, otherwise linuxrc would deny loading " -"an unsigned installation system at boot. See http://en.opensuse.org/Linuxrc " -"for more information.</P>" +"<P>If the product is not signed, Yast automatically adds the option 'Insecure:\n" +"1' to the linuxrc configuration file, otherwise linuxrc would deny loading an unsigned installation system at boot. See http://en.opensuse.org/Linuxrc for more information.</P>" msgstr "" "<P>제품이 서명되지 않은 경우 Yast에서 linuxrc 구성 파일에 'Insecure:\n" -"1' 옵션을 자동으로 추가하고, 그렇지 않으면 linuxrc에서 부팅 시 서명되지 않은 " -"설치 시스템 로드를 거부합니다. 자세한 내용은 http://en.opensuse.org/Linuxrc" -"를 참조하십시오.</P>" +"1' 옵션을 자동으로 추가하고, 그렇지 않으면 linuxrc에서 부팅 시 서명되지 않은 설치 시스템 로드를 거부합니다. 자세한 내용은 http://en.opensuse.org/Linuxrc를 참조하십시오.</P>" -#: src/include/product-creator/dialogs.rb:1849 +#: src/include/product-creator/dialogs.rb:1849 msgid "Signing the Product on the Medium" msgstr "매체의 제품에 서명" -#. Configuration Summary -#. @return [void] -#: src/include/product-creator/dialogs.rb:1899 +#. Configuration Summary +#. @return [void] +#: src/include/product-creator/dialogs.rb:1899 msgid "Configuration Summary" msgstr "설정 요약" -#. summary line -#: src/include/product-creator/dialogs.rb:1920 +#. summary line +#: src/include/product-creator/dialogs.rb:1920 msgid "Selected %1 packages" msgstr "%1개 패키지 선택함" -#. display the architecture in the summary if it has been changed -#: src/include/product-creator/dialogs.rb:1928 +#. display the architecture in the summary if it has been changed +#: src/include/product-creator/dialogs.rb:1928 msgid "Architecture" msgstr "구조" -#. summary caption -#: src/include/product-creator/dialogs.rb:1938 +#. summary caption +#: src/include/product-creator/dialogs.rb:1938 msgid "Output Directory" msgstr "출력 디렉토리" -#. summary line (%1/%2 is file path) -#: src/include/product-creator/dialogs.rb:1955 +#. summary line (%1/%2 is file path) +#: src/include/product-creator/dialogs.rb:1955 msgid "Creating directory tree in <b> %1/%2 </b>" msgstr "<b> %1/%2 </b>에 디렉토리 트리 생성" -#. header in the summary dialog -#: src/include/product-creator/dialogs.rb:1964 +#. header in the summary dialog +#: src/include/product-creator/dialogs.rb:1964 msgid "Signing" msgstr "서명" -#. summary text - %1 is GPG key ID (e.g. ABCDEF01), %2 is GPG key user ID (or empty if not defined) -#: src/include/product-creator/dialogs.rb:1984 +#. summary text - %1 is GPG key ID (e.g. ABCDEF01), %2 is GPG key user ID (or empty if not defined) +#: src/include/product-creator/dialogs.rb:1984 msgid "Digitally sign the medium with GPG key <b>%1</b>%2" msgstr "GPG 키 <b>%1</b>%2(을)를 사용해 매체에 디지털 서명" -#: src/include/product-creator/dialogs.rb:1999 +#: src/include/product-creator/dialogs.rb:1999 msgid "" "<p>Verify the data in the summary then press Next to continue.\n" "</p>\n" @@ -943,8 +929,8 @@ "<p>요약 데이터를 확인한 후 [다음]을 눌러 계속하십시오.\n" "</p>\n" -#. All helps are here -#: src/include/product-creator/helps.rb:35 +#. All helps are here +#: src/include/product-creator/helps.rb:35 msgid "" "<p><b><big>Boot Options</big></b><br>\n" "Add additional boot menu entries with boot options.\n" @@ -954,39 +940,37 @@ "부트 옵션이 포함된 추가 부트 메뉴 항목을 추가합니다.\n" "</p>\n" -#: src/include/product-creator/helps.rb:40 +#: src/include/product-creator/helps.rb:40 msgid "" "<p>For example, \n" "configure the CD for automatic installations and specify the installation\n" -"source location. If you are not sure, leave the file untouched and the " -"original is used.</p>\n" +"source location. If you are not sure, leave the file untouched and the original is used.</p>\n" msgstr "" "<p>예를 들어, \n" "자동 설치용 CD를 구성하고 설치 소스 위치를\n" " 지정합니다. 확실하지 않을 경우 파일을 그대로 두면 원본이 사용됩니다.</p>\n" -#. Read dialog help 1/2 -#: src/include/product-creator/helps.rb:46 +#. Read dialog help 1/2 +#: src/include/product-creator/helps.rb:46 msgid "<p><b><big>Initializing Configuration</big></b></p>\n" msgstr "<p><b><big>구성 초기화</big></b></p>\n" -#. Read dialog help 2/2 -#: src/include/product-creator/helps.rb:50 +#. Read dialog help 2/2 +#: src/include/product-creator/helps.rb:50 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" msgstr "" "<p><b><big>초기화 취소:</big></b><br>\n" -"지금 <b>취소</b>를 누름으로써 설정 유틸리티를 안전하게 취소할 수 있습니다.\n" +"지금 <b>취소</b>를 누름으로써 설정 유틸리티를 안전하게 취소할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/product-creator/helps.rb:54 +#. Write dialog help 1/2 +#: src/include/product-creator/helps.rb:54 msgid "<p><b><big>Saving Configuration</big></b></p>\n" msgstr "<p><b><big>구성 저장</big></b></p>\n" -#. Write dialog help 2/2 -#: src/include/product-creator/helps.rb:58 +#. Write dialog help 2/2 +#: src/include/product-creator/helps.rb:58 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -998,8 +982,8 @@ "추가적인 대화 상자는 강제로 중지하는 것이 안전한지를 알려줄 것입니다.\n" "</P>\n" -#. Ovreview dialog help 1/3 -#: src/include/product-creator/helps.rb:65 +#. Ovreview dialog help 1/3 +#: src/include/product-creator/helps.rb:65 msgid "" "<p><b><big>Product Creator Configuration Overview</big></b><br>\n" "Obtain an overview of available configurations. Additionally\n" @@ -1009,8 +993,8 @@ "사용 가능한 구성의 개요를 확인하고\n" "이러한 구성을 편집합니다.</br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/product-creator/helps.rb:71 +#. Ovreview dialog help 2/3 +#: src/include/product-creator/helps.rb:71 msgid "" "<p><b><big>Adding a Configuration:</big></b><br>\n" "Press <b>Add</b> to create a new configuration.</p>" @@ -1018,8 +1002,8 @@ "<p><b><big>구성 추가:</big></b><br>\n" "새 구성을 생성하려면 <b>추가</b>를 누르십시오.</p>" -#. Ovreview dialog help 3/3 -#: src/include/product-creator/helps.rb:75 +#. Ovreview dialog help 3/3 +#: src/include/product-creator/helps.rb:75 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "Choose a configuration to change or remove.\n" @@ -1029,8 +1013,8 @@ "변경하거나 제거할 구성을 선택합니다.\n" "그런 다음 각각 <b>편집</b> 또는 <b>삭제</b>를 누르십시오.</p>\n" -#. overview dialog help part 4 -#: src/include/product-creator/helps.rb:81 +#. overview dialog help part 4 +#: src/include/product-creator/helps.rb:81 msgid "" "<p>Use <b>Create Product</b> to create the ISO image or installation\n" "repository directory with the selected product.</p>" @@ -1038,20 +1022,17 @@ "<p><b>제품 생성</b>을 사용하여 선택한 제품이 포함된 ISO 이미지 또는 설치\n" "리포지토리 디렉토리를 생성하십시오.</p>" -#. overview dialog help part 5 -#: src/include/product-creator/helps.rb:85 +#. overview dialog help part 5 +#: src/include/product-creator/helps.rb:85 msgid "" -"<p>Press <b>Create Image with KIWI</b> for additional configuration of " -"various\n" -"types of images, such as Live media or Xen images, with the KIWI image " -"system.</p>" +"<p>Press <b>Create Image with KIWI</b> for additional configuration of various\n" +"types of images, such as Live media or Xen images, with the KIWI image system.</p>" msgstr "" "<p>라이브 미디어 또는 Xen 이미지와 같은 여러 유형의 이미지에 대한\n" -" 추가 구성은 KIWI 이미지 시스템을 사용하여 <b>KIWI로 이미지 작성</b>을 누르십" -"시오.</p>" +" 추가 구성은 KIWI 이미지 시스템을 사용하여 <b>KIWI로 이미지 작성</b>을 누르십시오.</p>" -#. Configure1 dialog help 1/4 -#: src/include/product-creator/helps.rb:89 +#. Configure1 dialog help 1/4 +#: src/include/product-creator/helps.rb:89 msgid "" "<p><b><big>Configuration Name and Packages</big></b><br>\n" "Choose a configuration name and the method with which to select \n" @@ -1061,8 +1042,8 @@ "구성 이름 및 ISO 이미지에 추가할 패키지를 선택하는 데 \n" "사용할 방법을 선택합니다.<br></p>\n" -#. Configure1 dialog help 3/4 -#: src/include/product-creator/helps.rb:95 +#. Configure1 dialog help 3/4 +#: src/include/product-creator/helps.rb:95 msgid "" "<b>AutoYaST Profile</b><p>\n" "Select an AutoYaST profile with the software configuration.\n" @@ -1072,8 +1053,8 @@ "소프트웨어 구성을 포함하는 AutoYaST 프로파일을 선택합니다.\n" "</p>\n" -#. Configure1 dialog help 3/4 -#: src/include/product-creator/helps.rb:101 +#. Configure1 dialog help 3/4 +#: src/include/product-creator/helps.rb:101 msgid "" "<b>Software Manager</b><p>\n" "Use the software manager without any preselected packages. All\n" @@ -1089,8 +1070,8 @@ "선택해야 합니다.\n" "</p>\n" -#. Source selection help 1/2 -#: src/include/product-creator/helps.rb:110 +#. Source selection help 1/2 +#: src/include/product-creator/helps.rb:110 msgid "" "<p><b><big>Select Package Sources</big></b><br>\n" "Select at least one package source.<br></p>\n" @@ -1098,29 +1079,25 @@ "<p><b><big>패키지 원본 선택</big></b><br>\n" "하나 이상의 패키지 원본을 선택합니다.<br></p>\n" -#. Source selection help 2/2 -#: src/include/product-creator/helps.rb:114 +#. Source selection help 2/2 +#: src/include/product-creator/helps.rb:114 msgid "" "<p><b><big>Target Architecture</big></b><br>\n" -"It is possible to create a product for a different architecture than that " -"of\n" +"It is possible to create a product for a different architecture than that of\n" "the machine you are currently working on.\n" "All selected repositories must support the target architecture.<br>\n" -"<b>Note:</b> KIWI does not support different architectures yet, do not " -"change\n" -"the architecture if you intend to create a KIWI image from the current " -"configuration.</p>\n" +"<b>Note:</b> KIWI does not support different architectures yet, do not change\n" +"the architecture if you intend to create a KIWI image from the current configuration.</p>\n" msgstr "" "<p><b><big>대상 아키텍처</big></b><br>\n" "현재 작업 중인 컴퓨터와 다른 아키텍처에 대한\n" "제품을 생성할 수 있습니다.\n" "선택한 모든 리포지토리는 대상 아키텍처를 지원해야 합니다.<br>\n" "<b>참고:</b> KIWI는 아직 다른 아키텍처를 지원하지 않습니다.\n" -"현재 구성에서 KIWI 이미지를 생성하려는 경우 아키텍처를 변경하지 마십시오.\n" +"현재 구성에서 KIWI 이미지를 생성하려는 경우 아키텍처를 변경하지 마십시오.</p>\n" -#. Configure2 dialog help 1/2 -#: src/include/product-creator/helps.rb:123 +#. Configure2 dialog help 1/2 +#: src/include/product-creator/helps.rb:123 msgid "" "<p><b><big>ISO Directory and Image</big></b><br>\n" "Enter the location in which to create the skeleton directory. All needed\n" @@ -1134,8 +1111,8 @@ "선택하십시오.\n" "<br></p>\n" -#. Configure2 dialog help 2/3 -#: src/include/product-creator/helps.rb:131 +#. Configure2 dialog help 2/3 +#: src/include/product-creator/helps.rb:131 msgid "" "<p>Create an ISO image or a directory that is suitable for \n" "creating an ISO image at a later time.\n" @@ -1145,8 +1122,8 @@ "디렉토리를 생성하십시오.\n" "</p>\n" -#. Configure2 dialog help 2/3 -#: src/include/product-creator/helps.rb:137 +#. Configure2 dialog help 2/3 +#: src/include/product-creator/helps.rb:137 msgid "" "<p>To save space, select the check box to copy only needed files \n" "to the skeleton. \n" @@ -1156,36 +1133,31 @@ "기본 디렉토리에 복사합니다. \n" "</p>\n" -#. help text - the base selection dialog 1/4 -#: src/include/product-creator/helps.rb:143 +#. help text - the base selection dialog 1/4 +#: src/include/product-creator/helps.rb:143 msgid "<p><b>The Base Product</b></p>" msgstr "<p><b>기본 제품</b></p>" -#. help text - the base selection dialog 2/4 -#: src/include/product-creator/helps.rb:147 +#. help text - the base selection dialog 2/4 +#: src/include/product-creator/helps.rb:147 msgid "" -"<p>One of the used repositories must be marked as the base product. The " -"base\n" -"product repository should be bootable to ensure the newly created product is " -"also\n" +"<p>One of the used repositories must be marked as the base product. The base\n" +"product repository should be bootable to ensure the newly created product is also\n" "bootable.</p>\n" msgstr "" "<p>사용된 리포지토리 중 하나가 기본 제품으로 표시되어야 합니다. 새로\n" "생성한 제품이 부팅 가능하도록 기본 제품 리포지토리도 부팅\n" "가능해야 합니다.</p>\n" -#. help text - the base selection dialog 3/4 -#: src/include/product-creator/helps.rb:153 -msgid "" -"<p>The other repositories will be used as add-ons for the base repository." +#. help text - the base selection dialog 3/4 +#: src/include/product-creator/helps.rb:153 +msgid "<p>The other repositories will be used as add-ons for the base repository.</p>" msgstr "<p>기타 리포지토리는 기본 리포지토리의 추가 기능으로 사용됩니다.</p>" -#. help text - the base selection dialog 4/4 -#: src/include/product-creator/helps.rb:157 +#. help text - the base selection dialog 4/4 +#: src/include/product-creator/helps.rb:157 msgid "" -"<p>The product creator solves dependencies of the selected products and " -"proposes\n" +"<p>The product creator solves dependencies of the selected products and proposes\n" "the base product. If the proposed value is wrong, select the right base\n" "repository from the list.</p>\n" msgstr "" @@ -1193,43 +1165,43 @@ "기본 제품을 제안합니다. 제안 값이 잘못된 경우 목록에서 올바른 기본\n" "리포지토리를 선택하십시오.</p>\n" -#. what are we configuring now ("iso"/"xen"/...) -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:68 -#: src/include/product-creator/kiwi_dialogs.rb:610 +#. what are we configuring now ("iso"/"xen"/...) +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:68 +#: src/include/product-creator/kiwi_dialogs.rb:610 msgid "Packages for Image" msgstr "이미지용 패키지" -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:69 -#: src/include/product-creator/kiwi_dialogs.rb:621 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:69 +#: src/include/product-creator/kiwi_dialogs.rb:621 msgid "Bootstrap" msgstr "부트스트랩" -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:70 -#: src/include/product-creator/kiwi_dialogs.rb:624 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:70 +#: src/include/product-creator/kiwi_dialogs.rb:624 msgid "Xen Specific Packages" msgstr "Xen 특정 패키지" -#. richtext header -#: src/include/product-creator/kiwi_dialogs.rb:361 +#. richtext header +#: src/include/product-creator/kiwi_dialogs.rb:361 msgid "Patterns" msgstr "패턴" -#. label -#: src/include/product-creator/kiwi_dialogs.rb:386 -#: src/include/product-creator/kiwi_dialogs.rb:2419 +#. label +#: src/include/product-creator/kiwi_dialogs.rb:386 +#: src/include/product-creator/kiwi_dialogs.rb:2419 msgid "&Ignored Software" msgstr "무시된 소프트웨어(&I)" -#. Popup for modifying the list of 'bootinclude' packages -#: src/include/product-creator/kiwi_dialogs.rb:466 +#. Popup for modifying the list of 'bootinclude' packages +#: src/include/product-creator/kiwi_dialogs.rb:466 msgid "Packages to be included in Boot Image" msgstr "부트 이미지에 포함될 패키지" -#. separate bootinclude packages from normal ones -#: src/include/product-creator/kiwi_dialogs.rb:575 +#. separate bootinclude packages from normal ones +#: src/include/product-creator/kiwi_dialogs.rb:575 msgid "" "Some of the packages that are selected for installation\n" "are also included in the list for deletion.\n" @@ -1239,73 +1211,73 @@ "포함되어 있습니다.\n" "계속하시겠습니까?" -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:613 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:613 msgid "Packages to Delete" msgstr "삭제할 패키지" -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:627 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:627 msgid "Testing" msgstr "테스트 중" -#. combo box label, %1 is profile name -#: src/include/product-creator/kiwi_dialogs.rb:634 +#. combo box label, %1 is profile name +#: src/include/product-creator/kiwi_dialogs.rb:634 msgid "Image, Profile %1" msgstr "이미지, 프로파일 %1" -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:644 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:644 msgid "Include in Boot Image" msgstr "부트 이미지에 포함" -#. popup label -#: src/include/product-creator/kiwi_dialogs.rb:1086 +#. popup label +#: src/include/product-creator/kiwi_dialogs.rb:1086 msgid "Add New User" msgstr "새 사용자 추가" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:1088 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:1088 msgid "Login &Name" msgstr "로그인 이름(&N)" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:1090 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:1090 msgid "&Full Name" msgstr "전체 이름(&F)" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:1094 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:1094 msgid "&Home Directory" msgstr "홈 디렉토리(&H)" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:1096 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:1096 msgid "&UID" msgstr "UID(&U)" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:1099 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:1099 msgid "G&roup Name" msgstr "그룹 이름(&R)" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:1101 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:1101 msgid "&GID" msgstr "GID(&G)" -#. popup label -#: src/include/product-creator/kiwi_dialogs.rb:1138 +#. popup label +#: src/include/product-creator/kiwi_dialogs.rb:1138 msgid "Edit User" msgstr "사용자 편집" -#. popup message -#: src/include/product-creator/kiwi_dialogs.rb:1150 +#. popup message +#: src/include/product-creator/kiwi_dialogs.rb:1150 msgid "Enter the user name." msgstr "사용자 이름을 입력하십시오." -#. popup message -#: src/include/product-creator/kiwi_dialogs.rb:1156 +#. popup message +#: src/include/product-creator/kiwi_dialogs.rb:1156 msgid "" "The passwords do not match.\n" "Try again." @@ -1313,117 +1285,111 @@ "비밀번호가 일치하지 않습니다.\n" "다시 시도하십시오." -#. popup for file selection dialog -#. popup for file selection dialog -#: src/include/product-creator/kiwi_dialogs.rb:1299 -#: src/include/product-creator/kiwi_dialogs.rb:3377 +#. popup for file selection dialog +#. popup for file selection dialog +#: src/include/product-creator/kiwi_dialogs.rb:1299 +#: src/include/product-creator/kiwi_dialogs.rb:3377 msgid "Directory to Import" msgstr "가져올 디렉토리" -#. popup for file selection dialog -#: src/include/product-creator/kiwi_dialogs.rb:1347 +#. popup for file selection dialog +#: src/include/product-creator/kiwi_dialogs.rb:1347 msgid "Script to Import" msgstr "가져올 스크립트" -#. popup for file selection dialog ('root' is a name, do not translate) -#: src/include/product-creator/kiwi_dialogs.rb:1392 +#. popup for file selection dialog ('root' is a name, do not translate) +#: src/include/product-creator/kiwi_dialogs.rb:1392 msgid "Path to root Directory" msgstr "루트 디렉토리 경로" -#. popup for file selection dialog ('config' is a name, do not translate) -#: src/include/product-creator/kiwi_dialogs.rb:1401 +#. popup for file selection dialog ('config' is a name, do not translate) +#: src/include/product-creator/kiwi_dialogs.rb:1401 msgid "Path to config Directory" msgstr "config 디렉토리 경로" -#. removing 'import_' button id prefix -#. popup for file selection dialog -#: src/include/product-creator/kiwi_dialogs.rb:1423 +#. removing 'import_' button id prefix +#. popup for file selection dialog +#: src/include/product-creator/kiwi_dialogs.rb:1423 msgid "Path to %1 File" msgstr "%1 파일 경로" -#. popup for file selection dialog -#: src/include/product-creator/kiwi_dialogs.rb:1443 +#. popup for file selection dialog +#: src/include/product-creator/kiwi_dialogs.rb:1443 msgid "Path to images.sh File" msgstr "images.sh 파일 경로" -#. generic popup -#: src/include/product-creator/kiwi_dialogs.rb:1460 +#. generic popup +#: src/include/product-creator/kiwi_dialogs.rb:1460 msgid "Feature not implemented yet." msgstr "기능이 아직 구현되지 않았습니다." -#. Check if selected packages are available (some of them may not after -#. deleting some repository) -#. return true if there was no conflict -#: src/include/product-creator/kiwi_dialogs.rb:1476 +#. Check if selected packages are available (some of them may not after +#. deleting some repository) +#. return true if there was no conflict +#: src/include/product-creator/kiwi_dialogs.rb:1476 msgid "Checking packages availability..." msgstr "패키지 가용성을 확인하는 중..." -#. do not check bootinclude packages -#: src/include/product-creator/kiwi_dialogs.rb:1508 +#. do not check bootinclude packages +#: src/include/product-creator/kiwi_dialogs.rb:1508 msgid "Missing packages" msgstr "누락된 패키지" -#. popup text -#: src/include/product-creator/kiwi_dialogs.rb:1513 +#. popup text +#: src/include/product-creator/kiwi_dialogs.rb:1513 msgid "" -"<p>Packages from section '%1' are not available with selected repositories:\n" +"<p>Packages from section '%1' are not available with selected repositories:</p>\n" "<p>%2.</p>\n" "<p>\n" -"Either remove the packages from the section, check the detailed package " -"selection or ignore the situation.</p>\n" +"Either remove the packages from the section, check the detailed package selection or ignore the situation.</p>\n" "<p>\n" -"Going to detailed package selection and accepting the view without any " -"further changes results in removal of problematic packages from the " -"section.\n" +"Going to detailed package selection and accepting the view without any further changes results in removal of problematic packages from the section.\n" "</p>\n" msgstr "" "<p>'%1' 섹션의 패키지는 선택한 리포지토리에서 사용할 수 없습니다.</p>\n" "<p>%2.</p>\n" "<p>\n" -"섹션에서 패키지를 제거하거나, 세부 패키지 선택을 확인하거나, 상황을 무시하십" -"시오.</p>\n" +"섹션에서 패키지를 제거하거나, 세부 패키지 선택을 확인하거나, 상황을 무시하십시오.</p>\n" "<p>\n" -"추가 변경 없이 세부 패키지 선택으로 이동하여 보기를 수락하면 섹션에서 문제가 " -"있는 패키지가 제거됩니다.\n" +"추가 변경 없이 세부 패키지 선택으로 이동하여 보기를 수락하면 섹션에서 문제가 있는 패키지가 제거됩니다.\n" "</p>\n" -#. button label -#: src/include/product-creator/kiwi_dialogs.rb:1528 +#. button label +#: src/include/product-creator/kiwi_dialogs.rb:1528 msgid "Remove Packages" msgstr "패키지 제거" -#. button label -#: src/include/product-creator/kiwi_dialogs.rb:1530 +#. button label +#: src/include/product-creator/kiwi_dialogs.rb:1530 msgid "Check Package Selection" msgstr "패키지 선택 확인" -#. button label -#: src/include/product-creator/kiwi_dialogs.rb:1534 +#. button label +#: src/include/product-creator/kiwi_dialogs.rb:1534 msgid "Ignore" msgstr "무시" -#: src/include/product-creator/kiwi_dialogs.rb:1534 +#: src/include/product-creator/kiwi_dialogs.rb:1534 msgid "Cancel" msgstr "취소" -#. popup question -#: src/include/product-creator/kiwi_dialogs.rb:1651 +#. popup question +#: src/include/product-creator/kiwi_dialogs.rb:1651 msgid "Create ISO image now?" msgstr "지금 ISO 이미지를 작성하시겠습니까?" -#. popup question -#: src/include/product-creator/kiwi_dialogs.rb:1653 +#. popup question +#: src/include/product-creator/kiwi_dialogs.rb:1653 msgid "Create Xen image now?" msgstr "지금 Xen 이미지를 작성하시겠습니까?" -#. popup question -#: src/include/product-creator/kiwi_dialogs.rb:1655 +#. popup question +#: src/include/product-creator/kiwi_dialogs.rb:1655 msgid "Create virtual disk image now?" msgstr "지금 가상 디스크 이미지를 작성하시겠습니까?" -#. popup message, %1 is a dir -#: src/include/product-creator/kiwi_dialogs.rb:1660 +#. popup message, %1 is a dir +#: src/include/product-creator/kiwi_dialogs.rb:1660 msgid "" "ISO image successfully created in\n" "%1\n" @@ -1433,8 +1399,8 @@ "%1\n" " 디렉토리에 성공적으로 작성되었습니다." -#. popup message, %1 is a dir -#: src/include/product-creator/kiwi_dialogs.rb:1666 +#. popup message, %1 is a dir +#: src/include/product-creator/kiwi_dialogs.rb:1666 msgid "" "Xen image files successfully created in\n" "%1\n" @@ -1444,8 +1410,8 @@ "%1\n" " 디렉토리에 성공적으로 작성되었습니다.\n" -#. popup message, %1 is a dir -#: src/include/product-creator/kiwi_dialogs.rb:1672 +#. popup message, %1 is a dir +#: src/include/product-creator/kiwi_dialogs.rb:1672 msgid "" "Virtual disk image successfully created in\n" "%1\n" @@ -1455,15 +1421,15 @@ "%1\n" " 디렉토리에 성공적으로 작성되었습니다." -#. popup label -#. default question -#: src/include/product-creator/kiwi_dialogs.rb:1710 -#: src/include/product-creator/kiwi_dialogs.rb:1748 +#. popup label +#. default question +#: src/include/product-creator/kiwi_dialogs.rb:1710 +#: src/include/product-creator/kiwi_dialogs.rb:1748 msgid "Create image now?" msgstr "지금 이미지를 작성하시겠습니까?" -#. default popup message, %1 is a dir -#: src/include/product-creator/kiwi_dialogs.rb:1778 +#. default popup message, %1 is a dir +#: src/include/product-creator/kiwi_dialogs.rb:1778 msgid "" "Image successfully created in\n" "%1\n" @@ -1473,565 +1439,483 @@ "%1\n" " 디렉토리에 성공적으로 작성되었습니다." -#. busy popup -#: src/include/product-creator/kiwi_dialogs.rb:1821 +#. busy popup +#: src/include/product-creator/kiwi_dialogs.rb:1821 msgid "Reading current image configuration..." msgstr "현재 이미지 구성 읽는 중…" -#. tab header -#. default dialog caption -#: src/include/product-creator/kiwi_dialogs.rb:2155 -#: src/include/product-creator/kiwi_dialogs.rb:2934 +#. tab header +#. default dialog caption +#: src/include/product-creator/kiwi_dialogs.rb:2155 +#: src/include/product-creator/kiwi_dialogs.rb:2934 msgid "Image Configuration" msgstr "이미지 구성" -#: src/include/product-creator/kiwi_dialogs.rb:2178 +#: src/include/product-creator/kiwi_dialogs.rb:2178 msgid "Installed Software" msgstr "설치된 소프트웨어" -#. tab header -#: src/include/product-creator/kiwi_dialogs.rb:2204 +#. tab header +#: src/include/product-creator/kiwi_dialogs.rb:2204 msgid "Description" msgstr "설명" -#. frame label -#: src/include/product-creator/kiwi_dialogs.rb:2217 +#. frame label +#: src/include/product-creator/kiwi_dialogs.rb:2217 msgid "Locale settings" msgstr "로케일 설정" -#. tab header -#: src/include/product-creator/kiwi_dialogs.rb:2235 +#. tab header +#: src/include/product-creator/kiwi_dialogs.rb:2235 msgid "Users" msgstr "사용자" -#. tab header -#: src/include/product-creator/kiwi_dialogs.rb:2259 +#. tab header +#: src/include/product-creator/kiwi_dialogs.rb:2259 msgid "Scripts" msgstr "스크립트" -#. informative label -#: src/include/product-creator/kiwi_dialogs.rb:2277 -msgid "" -"Editing of following files is disabled for configurations imported from " -"Studio." +#. informative label +#: src/include/product-creator/kiwi_dialogs.rb:2277 +msgid "Editing of following files is disabled for configurations imported from Studio." msgstr "Studio에서 임포트한 구성에 대해 다음 파일을 편집할 수 없습니다." -#. tab header -#: src/include/product-creator/kiwi_dialogs.rb:2305 +#. tab header +#: src/include/product-creator/kiwi_dialogs.rb:2305 msgid "Directories" msgstr "디렉토리" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2365 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2365 msgid "Co&mpression" msgstr "압축(&M)" -#. help text -#: src/include/product-creator/kiwi_dialogs.rb:2367 +#. help text +#: src/include/product-creator/kiwi_dialogs.rb:2367 msgid "" "<p>Select the value for image <b>Compression</b>. This will modify the\n" -"<i>flags</i> value of the image type. Check the kiwi manual for an " -"explanation of available values.</p>" +"<i>flags</i> value of the image type. Check the kiwi manual for an explanation of available values.</p>" msgstr "" "<p>이미지 <b>압축</b>에 대한 값을 선택하십시오. 이미지 유형의\n" -"<i>flags</i> 값이 수정됩니다. 사용 가능한 값에 대한 설명은 kiwi 매뉴얼을 확인" -"하십시오.</p>" +"<i>flags</i> 값이 수정됩니다. 사용 가능한 값에 대한 설명은 kiwi 매뉴얼을 확인하십시오.</p>" -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:2384 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:2384 msgid "So&ftware Selection" msgstr "소프트웨어 선택(&F)" -#. pusbutton label -#: src/include/product-creator/kiwi_dialogs.rb:2407 +#. pusbutton label +#: src/include/product-creator/kiwi_dialogs.rb:2407 msgid "Ch&ange..." msgstr "변경(&A)..." -#: src/include/product-creator/kiwi_dialogs.rb:2408 +#: src/include/product-creator/kiwi_dialogs.rb:2408 msgid "<p>Adapt the software selection with <b>Change</b>.</p>" msgstr "<p><b>변경</b>으로 소프트웨어 선택을 고칩니다.</p>" -#. help text for "&Ignored software" -#: src/include/product-creator/kiwi_dialogs.rb:2424 -msgid "" -"<p>For <b>ignored software</b>, enter each entry (like 'smtp_daemon') on a " -"new line.</p>" -msgstr "" -"<p><b>무시된 소프트웨어</b>의 경우 각 항목(예: 'smtp_daemon')을 새 줄에 입력" -"하십시오.</p>" +#. help text for "&Ignored software" +#: src/include/product-creator/kiwi_dialogs.rb:2424 +msgid "<p>For <b>ignored software</b>, enter each entry (like 'smtp_daemon') on a new line.</p>" +msgstr "<p><b>무시된 소프트웨어</b>의 경우 각 항목(예: 'smtp_daemon')을 새 줄에 입력하십시오.</p>" -#. label -#: src/include/product-creator/kiwi_dialogs.rb:2431 +#. label +#: src/include/product-creator/kiwi_dialogs.rb:2431 msgid "Packages to &Delete" msgstr "삭제할 패키지(&D)" -#. help text for "&Ignored software" -#: src/include/product-creator/kiwi_dialogs.rb:2436 -msgid "" -"<p>Each entry of <b>Packages to Delete</b> is one package name to be " -"uninstalled from the target image.</p>" -msgstr "" -"<p><b>삭제할 패키지</b>의 각 항목은 대상 이미지로부터 제거될 하나의 패키지 이" -"름입니다.</p>" +#. help text for "&Ignored software" +#: src/include/product-creator/kiwi_dialogs.rb:2436 +msgid "<p>Each entry of <b>Packages to Delete</b> is one package name to be uninstalled from the target image.</p>" +msgstr "<p><b>삭제할 패키지</b>의 각 항목은 대상 이미지로부터 제거될 하나의 패키지 이름입니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2443 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2443 msgid "&Version" msgstr "버전(&V)" -#: src/include/product-creator/kiwi_dialogs.rb:2444 +#: src/include/product-creator/kiwi_dialogs.rb:2444 msgid "<p>Enter the <b>Version</b> of your image configuration.</p>" msgstr "<p>이미지 구성의 <b>버전</b>을 입력합니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2459 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2459 msgid "&Size" msgstr "크기(&S)" -#. help text for "Size" field and "Additive" checkbox -#: src/include/product-creator/kiwi_dialogs.rb:2461 +#. help text for "Size" field and "Additive" checkbox +#: src/include/product-creator/kiwi_dialogs.rb:2461 msgid "" "<p>Set the image <b>Size</b> in the specified <b>Unit</b>.\n" -"If <b>Additive</b> is checked, the meaning of <b>Size</b> is different: it " -"is the minimal free space available on the image.</p>" +"If <b>Additive</b> is checked, the meaning of <b>Size</b> is different: it is the minimal free space available on the image.</p>" msgstr "" "<p>지정된 <b>단위</b>에서 이미지 <b>크기</b>를 설정하십시오.\n" -"<b>추가</b>를 선택한 경우 <b>크기</b>는 이미지에서 사용할 수 있는 최소한의 여" -"유 공간을 의미합니다.</p>" +"<b>추가</b>를 선택한 경우 <b>크기</b>는 이미지에서 사용할 수 있는 최소한의 여유 공간을 의미합니다.</p>" -#. combo box label (MB/GB values) -#: src/include/product-creator/kiwi_dialogs.rb:2473 +#. combo box label (MB/GB values) +#: src/include/product-creator/kiwi_dialogs.rb:2473 msgid "&Unit" msgstr "단위(&U)" -#. check box label -#: src/include/product-creator/kiwi_dialogs.rb:2480 +#. check box label +#: src/include/product-creator/kiwi_dialogs.rb:2480 msgid "Additive" msgstr "추가" -#. check box label -#: src/include/product-creator/kiwi_dialogs.rb:2487 +#. check box label +#: src/include/product-creator/kiwi_dialogs.rb:2487 msgid "Encrypt Image with LUKS" msgstr "LUKS로 이미지 암호화" -#. help text -#: src/include/product-creator/kiwi_dialogs.rb:2489 -msgid "" -"<p>To create an encrypted file system, check <b>Encrypt Image with LUKS</b> " -"and enter the password.</p>" -msgstr "" -"<p>암호화된 파일 시스템을 생성하려면 <b>LUKS로 이미지 암호화</b>를 선택하고 " -"비밀번호를 입력하십시오.</p>" +#. help text +#: src/include/product-creator/kiwi_dialogs.rb:2489 +msgid "<p>To create an encrypted file system, check <b>Encrypt Image with LUKS</b> and enter the password.</p>" +msgstr "<p>암호화된 파일 시스템을 생성하려면 <b>LUKS로 이미지 암호화</b>를 선택하고 비밀번호를 입력하십시오.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2500 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2500 msgid "Encrypted Image LUKS Password" msgstr "암호화된 이미지 LUKS 비밀번호" -#. general help for directory structure tab -#: src/include/product-creator/kiwi_dialogs.rb:2513 +#. general help for directory structure tab +#: src/include/product-creator/kiwi_dialogs.rb:2513 msgid "<p>Edit the configuration scripts used to build your image.</p>" msgstr "<p>이미지를 작성하는 데 사용되는 구성 스크립트를 편집하십시오.</p>" -#. general help for directory structure tab -#: src/include/product-creator/kiwi_dialogs.rb:2520 +#. general help for directory structure tab +#: src/include/product-creator/kiwi_dialogs.rb:2520 msgid "<p>Point to the configuration directories for building your image.</p>" msgstr "<p>이미지를 작성하는 데 사용되는 구성 디렉토리를 가리키십시오.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2527 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2527 msgid "Directory with System Configur&ation" msgstr "시스템 구성이 있는 디렉토리(&A)" -#. help text -#: src/include/product-creator/kiwi_dialogs.rb:2531 -msgid "" -"<p>Define the path to the <b>Directory with System Configuration</b> (the " -"<tt>root</tt> directory). The entire directory is copied into the root of " -"the image tree using <tt>cp -a</tt>.</p>" -msgstr "" -"<p><b>시스템 구성이 있는 디렉토리</b>(<tt>root</tt> 디렉토리)의 경로를 정의하" -"십시오. <tt>cp -a</tt>를 사용하여 전체 디렉토리를 이미지 트리의 루트에 복사합" -"니다.</p>" +#. help text +#: src/include/product-creator/kiwi_dialogs.rb:2531 +msgid "<p>Define the path to the <b>Directory with System Configuration</b> (the <tt>root</tt> directory). The entire directory is copied into the root of the image tree using <tt>cp -a</tt>.</p>" +msgstr "<p><b>시스템 구성이 있는 디렉토리</b>(<tt>root</tt> 디렉토리)의 경로를 정의하십시오. <tt>cp -a</tt>를 사용하여 전체 디렉토리를 이미지 트리의 루트에 복사합니다.</p>" -#. label (above table) -#: src/include/product-creator/kiwi_dialogs.rb:2551 +#. label (above table) +#: src/include/product-creator/kiwi_dialogs.rb:2551 msgid "Directory with System Configuration" msgstr "시스템 구성이 있는 디렉토리" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2556 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2556 msgid "Path to Directory" msgstr "디렉토리 경로" -#. help for table with users -#: src/include/product-creator/kiwi_dialogs.rb:2561 -msgid "" -"<p>Configure the <b>Directory with System Configuration</b> (the <tt>root directory). The entire directory is copied into the root of the image " -"tree using <tt>cp -a</tt>.</p>" -msgstr "" -"<p><b>시스템 구성이 있는 디렉토리</b>를 구성합니다(<tt>루트</tt> 디렉토리). " -"전체 디렉토리가 <tt>cp -a</tt>를 사용하여 이미지 트리의 루트에 복사됩니다." +#. help for table with users +#: src/include/product-creator/kiwi_dialogs.rb:2561 +msgid "<p>Configure the <b>Directory with System Configuration</b> (the <tt>root</tt> directory). The entire directory is copied into the root of the image tree using <tt>cp -a</tt>.</p>" +msgstr "<p><b>시스템 구성이 있는 디렉토리</b>를 구성합니다(<tt>루트</tt> 디렉토리). 전체 디렉토리가 <tt>cp -a</tt>를 사용하여 이미지 트리의 루트에 복사됩니다.</p>" -#. label (above table) -#: src/include/product-creator/kiwi_dialogs.rb:2588 +#. label (above table) +#: src/include/product-creator/kiwi_dialogs.rb:2588 msgid "Directory with Scripts" msgstr "스크립트가 있는 디렉토리" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2593 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2593 msgid "Path to File" msgstr "파일 경로" -#. help for table with users -#: src/include/product-creator/kiwi_dialogs.rb:2598 -msgid "" -"<p>Configure the <b>Directory with Scripts</b> (the <tt>config</tt> " -"directory). It contains scripts that are run after the installation of all " -"the image packages.</p>" -msgstr "" -"<p><b>스크립트가 있는 디렉토리</b>를 구성합니다(<tt>config</tt> 디렉토리). 모" -"든 이미지 패키지의 설치 후 실행되는 스크립트를 포함하고 있습니다.</p>" +#. help for table with users +#: src/include/product-creator/kiwi_dialogs.rb:2598 +msgid "<p>Configure the <b>Directory with Scripts</b> (the <tt>config</tt> directory). It contains scripts that are run after the installation of all the image packages.</p>" +msgstr "<p><b>스크립트가 있는 디렉토리</b>를 구성합니다(<tt>config</tt> 디렉토리). 모든 이미지 패키지의 설치 후 실행되는 스크립트를 포함하고 있습니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2627 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2627 msgid "Studio Custom Build Script" msgstr "Studio 사용자 지정 빌드 스크립트" -#. textentry label -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2635 -#: src/include/product-creator/kiwi_dialogs.rb:2656 +#. textentry label +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2635 +#: src/include/product-creator/kiwi_dialogs.rb:2656 msgid "&Import..." msgstr "임포트(&I)…" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2645 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2645 msgid "I&mage Configuration Script" msgstr "이미지 구성 스크립트(&M)" -#: src/include/product-creator/kiwi_dialogs.rb:2646 -msgid "" -"<p>Edit your <b>Image Configuration Script</b>, called <tt>config.sh</tt>. " -"This script is run at the end of the installation but before the package " -"scripts have run.</p>" -msgstr "" -"<p><tt>config.sh</tt>라는 <b>이미지 구성 스크립트</b>를 편집합니다. 이 스크" -"립트는 설치 마지막에 그러나 패키지 스크립트가 실행되기 전에 실행됩니다.</p>" +#: src/include/product-creator/kiwi_dialogs.rb:2646 +msgid "<p>Edit your <b>Image Configuration Script</b>, called <tt>config.sh</tt>. This script is run at the end of the installation but before the package scripts have run.</p>" +msgstr "<p><tt>config.sh</tt>라는 <b>이미지 구성 스크립트</b>를 편집합니다. 이 스크립트는 설치 마지막에 그러나 패키지 스크립트가 실행되기 전에 실행됩니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2666 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2666 msgid "Pa&th to Directory with Scripts" msgstr "스크립트가 있는 디렉토리 경로(&T)" -#: src/include/product-creator/kiwi_dialogs.rb:2667 -msgid "" -"<p>The optional <b>Directory with Scripts</b> (<tt>config</tt> directory) " -"contains scripts that are run after the installation of all the image " -"packages.</p>" -msgstr "" -"<p>선택적인 <b>스크립트가 있는 디렉토리</b>(<tt>config</tt> 디렉토리)는 모든 " -"이미지 패키지의 설치 후에 실행되는 스크립트를 포함하고 있습니다.</p>" +#: src/include/product-creator/kiwi_dialogs.rb:2667 +msgid "<p>The optional <b>Directory with Scripts</b> (<tt>config</tt> directory) contains scripts that are run after the installation of all the image packages.</p>" +msgstr "<p>선택적인 <b>스크립트가 있는 디렉토리</b>(<tt>config</tt> 디렉토리)는 모든 이미지 패키지의 설치 후에 실행되는 스크립트를 포함하고 있습니다.</p>" -#. push button label -#: src/include/product-creator/kiwi_dialogs.rb:2677 +#. push button label +#: src/include/product-creator/kiwi_dialogs.rb:2677 msgid "Br&owse..." msgstr "찾아보기(&O)..." -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2687 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2687 msgid "C&leanup Script" msgstr "정리 스크립트(&L)" -#: src/include/product-creator/kiwi_dialogs.rb:2688 -msgid "" -"<p>Edit your <b>Cleanup Script</b> (<tt>images.sh</tt>). This script is run " -"at the beginning of the image creation process.</p>" -msgstr "" -"<p><b>정리 스크립트</b>(<tt>images.sh</tt>)를 편집합니다. 이 스크립트는 이미" -"지 작성 과정의 맨 처음에 실행됩니다.</p>" +#: src/include/product-creator/kiwi_dialogs.rb:2688 +msgid "<p>Edit your <b>Cleanup Script</b> (<tt>images.sh</tt>). This script is run at the beginning of the image creation process.</p>" +msgstr "<p><b>정리 스크립트</b>(<tt>images.sh</tt>)를 편집합니다. 이 스크립트는 이미지 작성 과정의 맨 처음에 실행됩니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2698 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2698 msgid "Im&port..." msgstr "임포트(&P)…" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2709 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2709 msgid "&Author" msgstr "저자(&A)" -#. help text for Author, Contact and Specification widgets -#: src/include/product-creator/kiwi_dialogs.rb:2711 -msgid "" -"<p>Set the values for <b>Author</b> of the image, <b>Contact Information, and the image <b>Specification</b>.</p>" -msgstr "" -"<p>이미지의 <b>저자</b>, <b>연락처 정보 및 이미지 <b>사양</b>에 해당하" -"는 값을 설정합니다.</p>" +#. help text for Author, Contact and Specification widgets +#: src/include/product-creator/kiwi_dialogs.rb:2711 +msgid "<p>Set the values for <b>Author</b> of the image, <b>Contact Information</b>, and the image <b>Specification</b>.</p>" +msgstr "<p>이미지의 <b>저자</b>, <b>연락처 정보 및 이미지 <b>사양</b>에 해당하는 값을 설정합니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2724 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2724 msgid "C&ontact" msgstr "연락처(O)" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2736 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2736 msgid "&Specification" msgstr "사양(&S)" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2750 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2750 msgid "&Locale" msgstr "로케일(&L)" -#. help text for locale (heading) -#: src/include/product-creator/kiwi_dialogs.rb:2758 +#. help text for locale (heading) +#: src/include/product-creator/kiwi_dialogs.rb:2758 msgid "<p><b>Locale Settings</b></p>" msgstr "<p><b>로케일 설정</b></p>" -#. help text for locale -#: src/include/product-creator/kiwi_dialogs.rb:2762 -msgid "" -"<p>The value of <b>Locale</b> (e.g. <tt>en_US</tt>) defines the contents of " -"the RC_LANG variable in <t>/etc/sysconfig/language</tt>.</p>" -msgstr "" -"<p><b>로케일</b> 값(예: <tt>en_US</tt>)은 <t>/etc/sysconfig/language</tt>에" -"서 RC_LANG 변수의 내용을 정의합니다.</p>" +#. help text for locale +#: src/include/product-creator/kiwi_dialogs.rb:2762 +msgid "<p>The value of <b>Locale</b> (e.g. <tt>en_US</tt>) defines the contents of the RC_LANG variable in <t>/etc/sysconfig/language</tt>.</p>" +msgstr "<p><b>로케일</b> 값(예: <tt>en_US</tt>)은 <t>/etc/sysconfig/language</tt>에서 RC_LANG 변수의 내용을 정의합니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2770 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2770 msgid "&Keyboard Layout" msgstr "키보드 배열(&K)" -#. help text for keytable -#: src/include/product-creator/kiwi_dialogs.rb:2778 -msgid "" -"<p><b>Keyboard Layout</b> specifies the name of the console keymap to use. " -"The value corresponds to a map file in <tt>/usr/share/kbd/keymaps</tt>.</p>" -msgstr "" -"<p><b>키보드 배열</b>은 사용할 콘솔 keymap의 이름을 지정합니다. 값은 <tt>/" -"usr/share/kbd/keymaps</tt>의 맵 파일에 해당합니다.</p>" +#. help text for keytable +#: src/include/product-creator/kiwi_dialogs.rb:2778 +msgid "<p><b>Keyboard Layout</b> specifies the name of the console keymap to use. The value corresponds to a map file in <tt>/usr/share/kbd/keymaps</tt>.</p>" +msgstr "<p><b>키보드 배열</b>은 사용할 콘솔 keymap의 이름을 지정합니다. 값은 <tt>/usr/share/kbd/keymaps</tt>의 맵 파일에 해당합니다.</p>" -#. textentry label -#: src/include/product-creator/kiwi_dialogs.rb:2787 +#. textentry label +#: src/include/product-creator/kiwi_dialogs.rb:2787 msgid "&Time Zone" msgstr "시간대(&T)" -#. help text for timezone -#: src/include/product-creator/kiwi_dialogs.rb:2795 -msgid "" -"<p>It is possible to set a specific <b>Time zone</b>. Available time zones " -"are located in the <tt>/usr/share/zoneinfo</tt> directory.</p>" -msgstr "" -"<p>특정 <b>시간대</b>를 설정할 수 있습니다. 사용 가능한 시간대는 <tt>/usr/" -"share/zoneinfo</tt> 디렉토리에 있습니다.</p>" +#. help text for timezone +#: src/include/product-creator/kiwi_dialogs.rb:2795 +msgid "<p>It is possible to set a specific <b>Time zone</b>. Available time zones are located in the <tt>/usr/share/zoneinfo</tt> directory.</p>" +msgstr "<p>특정 <b>시간대</b>를 설정할 수 있습니다. 사용 가능한 시간대는 <tt>/usr/share/zoneinfo</tt> 디렉토리에 있습니다.</p>" -#. general help for users tab -#: src/include/product-creator/kiwi_dialogs.rb:2803 +#. general help for users tab +#: src/include/product-creator/kiwi_dialogs.rb:2803 msgid "<p>Create users that should be available on the target system.</p>" msgstr "<p>대상 시스템에서 사용할 수 있어야 하는 사용자를 생성하십시오.</p>" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2814 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2814 msgid "Login Name" msgstr "로그인 이름" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2816 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2816 msgid "Full Name" msgstr "전체 이름" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2818 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2818 msgid "UID" msgstr "UID" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2820 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2820 msgid "Home Directory" msgstr "홈 디렉토리" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2822 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2822 msgid "Group" msgstr "그룹" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:2824 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:2824 msgid "GID" msgstr "GID" -#. help for table with users -#: src/include/product-creator/kiwi_dialogs.rb:2828 +#. help for table with users +#: src/include/product-creator/kiwi_dialogs.rb:2828 msgid "" -"<p>For each user, specify the <b>Name</b>, <b>Password</b>, <b>Home " -"Directory</b> and group\n" +"<p>For each user, specify the <b>Name</b>, <b>Password</b>, <b>Home Directory</b> and group\n" "to which the users belongs.</p>\n" msgstr "" -"<p>각 사용자마다 <b>이름</b>, <b>비밀번호</b>, <b>홈 디렉토리</b> 및 사용자" -"가\n" +"<p>각 사용자마다 <b>이름</b>, <b>비밀번호</b>, <b>홈 디렉토리</b> 및 사용자가\n" "속한 그룹을 지정합니다.</p>\n" -#. dialog caption -#: src/include/product-creator/kiwi_dialogs.rb:2911 +#. dialog caption +#: src/include/product-creator/kiwi_dialogs.rb:2911 msgid "Live CD Configuration" msgstr "라이브 CD 구성" -#. dialog caption -#: src/include/product-creator/kiwi_dialogs.rb:2913 +#. dialog caption +#: src/include/product-creator/kiwi_dialogs.rb:2913 msgid "Xen Image Configuration" msgstr "Xen 이미지 구성" -#. button label -#: src/include/product-creator/kiwi_dialogs.rb:2919 +#. button label +#: src/include/product-creator/kiwi_dialogs.rb:2919 msgid "&Create ISO" msgstr "ISO 작성(&C)" -#. button label -#: src/include/product-creator/kiwi_dialogs.rb:2921 +#. button label +#: src/include/product-creator/kiwi_dialogs.rb:2921 msgid "&Create Xen Image" msgstr "Xen 이미지 작성(&C)" -#. button label -#: src/include/product-creator/kiwi_dialogs.rb:2923 +#. button label +#: src/include/product-creator/kiwi_dialogs.rb:2923 msgid "&Create Virtual Disk Image" msgstr "가상 디스크 이미지 작성(&C)" -#. help text for kiwi UI preparation -#: src/include/product-creator/kiwi_dialogs.rb:2973 -msgid "" -"<p>Enter the name of your image configuration. Base new configuration on " -"template from the list or on the directory with the existing configuration." -msgstr "" -"<p>이미지 구성의 이름을 입력합니다. 새 구성은 목록의 템플릿 또는 기존 구성이 " -"있는 디렉토리에 배치합니다." +#. help text for kiwi UI preparation +#: src/include/product-creator/kiwi_dialogs.rb:2973 +msgid "<p>Enter the name of your image configuration. Base new configuration on template from the list or on the directory with the existing configuration.</p>" +msgstr "<p>이미지 구성의 이름을 입력합니다. 새 구성은 목록의 템플릿 또는 기존 구성이 있는 디렉토리에 배치합니다." -#. help text for kiwi UI preparation -#: src/include/product-creator/kiwi_dialogs.rb:2980 -msgid "" -"<p>Place custom configuration templates under <tt>%1</tt> directory.</p>" -msgstr "" -"<p><tt>%1</tt> 디렉토리 아래에 사용자 정의 구성 템플릿을 배치합니다.</p>" +#. help text for kiwi UI preparation +#: src/include/product-creator/kiwi_dialogs.rb:2980 +msgid "<p>Place custom configuration templates under <tt>%1</tt> directory.</p>" +msgstr "<p><tt>%1</tt> 디렉토리 아래에 사용자 정의 구성 템플릿을 배치합니다.</p>" -#. help text for kiwi UI preparation, cont. -#: src/include/product-creator/kiwi_dialogs.rb:2988 +#. help text for kiwi UI preparation, cont. +#: src/include/product-creator/kiwi_dialogs.rb:2988 msgid "<p>Choose the <b>Image Type</b> which should be created.</p>" msgstr "<p>작성할 <b>이미지 유형</b>을 선택합니다.</p>" -#. help text for kiwi UI preparation, cont. -#: src/include/product-creator/kiwi_dialogs.rb:2991 +#. help text for kiwi UI preparation, cont. +#: src/include/product-creator/kiwi_dialogs.rb:2991 msgid "<p>Select <b>Output Directory</b> for the created image.</p>" msgstr "<p>작성된 이미지의 <b>출력 디렉토리</b>를 선택합니다.</p>" -#. help text for kiwi UI preparation, cont. -#: src/include/product-creator/kiwi_dialogs.rb:2994 -msgid "" -"<p>Modify the list of <b>Package Repositories</b> that will be used for " -"creating the image. Use <b>Add From System</b> to add one of the current " -"system repositories.</p>" -msgstr "" -"<p>이미지 작성에 사용할 <b>패키지 리포지토리</b> 목록을 수정합니다. <b>시스템" -"에서 추가</b>를 사용하여 현재 시스템 리포지토리 중 하나를 추가합니다.</p>" +#. help text for kiwi UI preparation, cont. +#: src/include/product-creator/kiwi_dialogs.rb:2994 +msgid "<p>Modify the list of <b>Package Repositories</b> that will be used for creating the image. Use <b>Add From System</b> to add one of the current system repositories.</p>" +msgstr "<p>이미지 작성에 사용할 <b>패키지 리포지토리</b> 목록을 수정합니다. <b>시스템에서 추가</b>를 사용하여 현재 시스템 리포지토리 중 하나를 추가합니다.</p>" -#. help text for kiwi UI preparation, cont. -#: src/include/product-creator/kiwi_dialogs.rb:2999 +#. help text for kiwi UI preparation, cont. +#: src/include/product-creator/kiwi_dialogs.rb:2999 msgid "<p>Click <b>Next</b> to continue with the configuration.</p>" msgstr "<p><b>다음</b>을 클릭하여 구성을 계속하십시오.</p>" -#. combo box item -#: src/include/product-creator/kiwi_dialogs.rb:3020 +#. combo box item +#: src/include/product-creator/kiwi_dialogs.rb:3020 msgid "Network Boot Image" msgstr "네트워크 부트 이미지" -#. combo box item -#: src/include/product-creator/kiwi_dialogs.rb:3028 +#. combo box item +#: src/include/product-creator/kiwi_dialogs.rb:3028 msgid "OEM Image" msgstr "OEM 이미지" -#. error popup -#: src/include/product-creator/kiwi_dialogs.rb:3123 -msgid "" -"Selected directory does not contain valid description of system " -"configuration." -msgstr "" -"선택한 디렉토리에 시스템 구성에 대한 유효한 설명이 포함되어 있지 않습니다." +#. error popup +#: src/include/product-creator/kiwi_dialogs.rb:3123 +msgid "Selected directory does not contain valid description of system configuration." +msgstr "선택한 디렉토리에 시스템 구성에 대한 유효한 설명이 포함되어 있지 않습니다." -#. busy popup -#: src/include/product-creator/kiwi_dialogs.rb:3131 +#. busy popup +#: src/include/product-creator/kiwi_dialogs.rb:3131 msgid "Importing repositories..." msgstr "저장소를 가져오는 중..." -#. combo box item, %1 is name, %2 version -#: src/include/product-creator/kiwi_dialogs.rb:3182 +#. combo box item, %1 is name, %2 version +#: src/include/product-creator/kiwi_dialogs.rb:3182 msgid "%1, version %2" msgstr "%1, 버전 %2" -#. checkbox label -#: src/include/product-creator/kiwi_dialogs.rb:3197 +#. checkbox label +#: src/include/product-creator/kiwi_dialogs.rb:3197 msgid "&32bit Architecture Image" msgstr "32비트 아키텍처 이미지(&3)" -#. checkbox label -#: src/include/product-creator/kiwi_dialogs.rb:3209 +#. checkbox label +#: src/include/product-creator/kiwi_dialogs.rb:3209 msgid "Target is i586 only" msgstr "대상은 i586만입니다." -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:3222 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:3222 msgid "&Kiwi Configuration" msgstr "Kiwi 구성(&K)" -#. radio button label -#: src/include/product-creator/kiwi_dialogs.rb:3236 +#. radio button label +#: src/include/product-creator/kiwi_dialogs.rb:3236 msgid "Create from Scratch" msgstr "처음부터 생성" -#. radio button label -#: src/include/product-creator/kiwi_dialogs.rb:3247 +#. radio button label +#: src/include/product-creator/kiwi_dialogs.rb:3247 msgid "Base on Template" msgstr "템플릿 기반" -#. radio button label -#: src/include/product-creator/kiwi_dialogs.rb:3266 +#. radio button label +#: src/include/product-creator/kiwi_dialogs.rb:3266 msgid "Base on Existing Configuration" msgstr "기존 구성 기반" -#. push button label -#: src/include/product-creator/kiwi_dialogs.rb:3273 +#. push button label +#: src/include/product-creator/kiwi_dialogs.rb:3273 msgid "&Choose..." msgstr "선택(&C)..." -#. combo box label -#: src/include/product-creator/kiwi_dialogs.rb:3284 +#. combo box label +#: src/include/product-creator/kiwi_dialogs.rb:3284 msgid "I&mage Type" msgstr "이미지 유형(&M)" -#. text entry label -#: src/include/product-creator/kiwi_dialogs.rb:3292 +#. text entry label +#: src/include/product-creator/kiwi_dialogs.rb:3292 msgid "&Output Directory" msgstr "출력 디렉토리(&O)" -#. table header -#: src/include/product-creator/kiwi_dialogs.rb:3304 +#. table header +#: src/include/product-creator/kiwi_dialogs.rb:3304 msgid "Package Repository" msgstr "패키지 저장소" -#. menu butto label -#: src/include/product-creator/kiwi_dialogs.rb:3310 +#. menu butto label +#: src/include/product-creator/kiwi_dialogs.rb:3310 msgid "A&dd from System" msgstr "시스템에서 추가(&D)" -#. dialog caption -#: src/include/product-creator/kiwi_dialogs.rb:3318 +#. dialog caption +#: src/include/product-creator/kiwi_dialogs.rb:3318 msgid "Image preparation" msgstr "이미지 준비" -#. popup error message, %1 is the package name -#: src/include/product-creator/kiwi_dialogs.rb:3414 +#. popup error message, %1 is the package name +#: src/include/product-creator/kiwi_dialogs.rb:3414 msgid "" "Cannot search for SLP repositories\n" "without having %1 package installed.\n" @@ -2039,13 +1923,13 @@ "%1 패키지가 설치되어 있지 않으면\n" "SLP 리포지토리를 검색할 수 없습니다.\n" -#. popup for file selection dialog -#: src/include/product-creator/kiwi_dialogs.rb:3500 +#. popup for file selection dialog +#: src/include/product-creator/kiwi_dialogs.rb:3500 msgid "Path to the Output Directory" msgstr "출력 디렉토리 경로" -#. error popup -#: src/include/product-creator/kiwi_dialogs.rb:3521 +#. error popup +#: src/include/product-creator/kiwi_dialogs.rb:3521 msgid "" "Configuration with name \"%1\" already exists.\n" "Choose a different one." @@ -2053,18 +1937,18 @@ "구성 이름 \"%1\"이(가) 이미 존재합니다.\n" "다른 이름을 선택하십시오." -#. error popup -#: src/include/product-creator/kiwi_dialogs.rb:3533 +#. error popup +#: src/include/product-creator/kiwi_dialogs.rb:3533 msgid "Enter the path to the output directory." msgstr "출력 디렉토리의 경로를 입력합니다." -#. error popup -#: src/include/product-creator/kiwi_dialogs.rb:3539 +#. error popup +#: src/include/product-creator/kiwi_dialogs.rb:3539 msgid "Specify at least one package repository." msgstr "하나 이상의 패키지 저장소를 지정합니다." -#. continue/cancel popup %1 is a \n separated list -#: src/include/product-creator/kiwi_dialogs.rb:3640 +#. continue/cancel popup %1 is a \n separated list +#: src/include/product-creator/kiwi_dialogs.rb:3640 msgid "" "Failed to add these repositories:\n" "\n" @@ -2078,22 +1962,22 @@ "\n" "계속하시겠습니까?" -#. text box label -#: src/modules/Kiwi.rb:693 +#. text box label +#: src/modules/Kiwi.rb:693 msgid "Path to directory to store the log files" msgstr "로그 파일을 저장할 디렉토리 경로" -#. text box label -#: src/modules/Kiwi.rb:702 +#. text box label +#: src/modules/Kiwi.rb:702 msgid "Standard output file name" msgstr "표준 출력 파일 이름" -#. text box label -#: src/modules/Kiwi.rb:709 +#. text box label +#: src/modules/Kiwi.rb:709 msgid "Error output file name" msgstr "오류 출력 파일 이름" -#: src/modules/Kiwi.rb:751 src/modules/Kiwi.rb:760 +#: src/modules/Kiwi.rb:751 src/modules/Kiwi.rb:760 msgid "" "File %1 already exists.\n" "Rewrite?" @@ -2101,106 +1985,106 @@ "%1 파일이 이미 있습니다.\n" "다시 쓰시겠습니까?" -#. run kiwi to finally create the selected image -#. @param [String] out_dir output directory for the result -#. @param [String] selected_profiles which profiles should be build (prepared part -#. of command line option) -#: src/modules/Kiwi.rb:825 +#. run kiwi to finally create the selected image +#. @param [String] out_dir output directory for the result +#. @param [String] selected_profiles which profiles should be build (prepared part +#. of command line option) +#: src/modules/Kiwi.rb:825 msgid "Removing old chroot directory failed." msgstr "기존 chroot 디렉토리를 제거하지 못했습니다." -#. label -#: src/modules/Kiwi.rb:848 +#. label +#: src/modules/Kiwi.rb:848 msgid "Preparing for Image Creation" msgstr "이미지 작성 준비 중" -#. button label -#: src/modules/Kiwi.rb:866 +#. button label +#: src/modules/Kiwi.rb:866 msgid "Save logs" msgstr "로그 저장" -#. label (command result) -#: src/modules/Kiwi.rb:940 +#. label (command result) +#: src/modules/Kiwi.rb:940 msgid "Image creation failed." msgstr "이미지 작성에 실패했습니다." -#. label -#: src/modules/Kiwi.rb:965 +#. label +#: src/modules/Kiwi.rb:965 msgid "Creating Image" msgstr "이미지 생성 중" -#. label (command result) -#: src/modules/Kiwi.rb:976 +#. label (command result) +#: src/modules/Kiwi.rb:976 msgid "Image creation succeeded." msgstr "이미지 작성에 성공했습니다." -#. label (command result) -#: src/modules/Kiwi.rb:995 +#. label (command result) +#: src/modules/Kiwi.rb:995 msgid "Image creation canceled." msgstr "이미지 생성이 취소되었습니다." -#. ProductCreator read dialog caption -#: src/modules/ProductCreator.rb:457 +#. ProductCreator read dialog caption +#: src/modules/ProductCreator.rb:457 msgid "Initializing Product Creator Configuration" msgstr "Product Creator 구성 초기화 중" -#. translators: progress stage 1/1 -#: src/modules/ProductCreator.rb:471 +#. translators: progress stage 1/1 +#: src/modules/ProductCreator.rb:471 msgid "Read the configuration" msgstr "구성을 읽습니다." -#. translators: progress step 1/1 -#: src/modules/ProductCreator.rb:475 +#. translators: progress step 1/1 +#: src/modules/ProductCreator.rb:475 msgid "Reading the database..." msgstr "데이타 베이스를 읽고 있습니다..." -#. translators: progress finished -#. translators: progress finished -#. translators: progress finished -#. translators: progress finished -#: src/modules/ProductCreator.rb:477 src/modules/ProductCreator.rb:504 -#: src/modules/ProductCreator.rb:557 src/modules/ProductCreator.rb:583 +#. translators: progress finished +#. translators: progress finished +#. translators: progress finished +#. translators: progress finished +#: src/modules/ProductCreator.rb:477 src/modules/ProductCreator.rb:504 +#: src/modules/ProductCreator.rb:557 src/modules/ProductCreator.rb:583 msgid "Finished" msgstr "완료됨" -#. translators: error message -#: src/modules/ProductCreator.rb:498 +#. translators: error message +#: src/modules/ProductCreator.rb:498 msgid "Cannot read the configuration." msgstr "구성을 읽을 수 없습니다." -#. ProductCreator read dialog caption -#: src/modules/ProductCreator.rb:537 +#. ProductCreator read dialog caption +#: src/modules/ProductCreator.rb:537 msgid "Saving Product Creator Configuration" msgstr "Product Creator 구성 저장 중" -#. translators: progress stage 1/2 -#: src/modules/ProductCreator.rb:551 +#. translators: progress stage 1/2 +#: src/modules/ProductCreator.rb:551 msgid "Write the settings" msgstr "세팅 기록" -#. translators: progress step 1/1 -#: src/modules/ProductCreator.rb:555 +#. translators: progress step 1/1 +#: src/modules/ProductCreator.rb:555 msgid "Writing the settings..." msgstr "세팅을 기록하고 있습니다..." -#. translators: error message -#: src/modules/ProductCreator.rb:577 +#. translators: error message +#: src/modules/ProductCreator.rb:577 msgid "Error while writing settings." msgstr "설정을 쓰는 동안 오류가 발생했습니다." -#. translators: Configuration summary text for autoyast -#: src/modules/ProductCreator.rb:610 +#. translators: Configuration summary text for autoyast +#: src/modules/ProductCreator.rb:610 msgid "Configuration summary ..." msgstr "구성 요약..." -#. Create an overview table with all configured cards -#. @return table items -#: src/modules/ProductCreator.rb:623 +#. Create an overview table with all configured cards +#. @return table items +#: src/modules/ProductCreator.rb:623 msgid "No Files" msgstr "파일 없음" -#. an error message, %1 is the directory, %2 is URL of the source -#: src/modules/ProductCreator.rb:1003 +#. an error message, %1 is the directory, %2 is URL of the source +#: src/modules/ProductCreator.rb:1003 msgid "" "Cannot read directory %1\n" "from source %2." @@ -2208,14 +2092,14 @@ "원본 %2에서 %1 디렉토리를\n" " 읽을 수 없습니다." -#. the copy is not needed if the sourse will be signed with a gpg key -#. check if the metadata are gzipped -#: src/modules/ProductCreator.rb:2089 src/modules/ProductCreator.rb:3691 +#. the copy is not needed if the sourse will be signed with a gpg key +#. check if the metadata are gzipped +#: src/modules/ProductCreator.rb:2089 src/modules/ProductCreator.rb:3691 msgid "Error reading control file." msgstr "제어 파일을 읽는 동안 오류가 발생했습니다." -#. workaround for bnc#498464 -#: src/modules/ProductCreator.rb:2698 +#. workaround for bnc#498464 +#: src/modules/ProductCreator.rb:2698 msgid "" "Could not add GPG key %1 to initrd\n" "%2.\n" @@ -2223,8 +2107,8 @@ "GPG 키 %1을(를) initrd\n" "%2에 추가할 수 없습니다.\n" -#. yes/no popup: error message -#: src/modules/ProductCreator.rb:2892 +#. yes/no popup: error message +#: src/modules/ProductCreator.rb:2892 msgid "" "Error: Could not digitally sign the source.\n" "Try again?\n" @@ -2232,8 +2116,8 @@ "오류: 원본에 디지털 서명을 할 수 없습니다.\n" "다시 시도하시겠습니까?\n" -#. error message, %1 is list of URLs (one URL per line) -#: src/modules/ProductCreator.rb:3002 +#. error message, %1 is list of URLs (one URL per line) +#: src/modules/ProductCreator.rb:3002 msgid "" "These sources were not found:\n" "%1" @@ -2241,18 +2125,18 @@ "이 원본을 찾을 수 없습니다.\n" "%1" -#. popup question, %1 is directory name -#: src/modules/ProductCreator.rb:3254 +#. popup question, %1 is directory name +#: src/modules/ProductCreator.rb:3254 msgid "Remove the destination directory %1?" msgstr "%1 대상 디렉토리를 제거하시겠습니까?" -#. remove the destination -#: src/modules/ProductCreator.rb:3279 +#. remove the destination +#: src/modules/ProductCreator.rb:3279 msgid "The destination %1 already exists." msgstr "대상 %1이(가) 이미 존재합니다." -#. TODO ask in interactive mode -#: src/modules/ProductCreator.rb:3288 +#. TODO ask in interactive mode +#: src/modules/ProductCreator.rb:3288 msgid "" "Destination directory exists or is a file.\n" "Remove directory %1?" @@ -2260,25 +2144,25 @@ "대상 디렉토리가 있거나 파일입니다.\n" "%1 디렉토리를 제거하시겠습니까?" -#. Check if selected packages are available -#. @return [String] error message -#: src/modules/ProductCreator.rb:3309 +#. Check if selected packages are available +#. @return [String] error message +#: src/modules/ProductCreator.rb:3309 msgid "Checking for package availability..." msgstr "패키지의 유효성을 검사중..." -#. add an empty map if the source doesn't exist -#: src/modules/ProductCreator.rb:3368 +#. add an empty map if the source doesn't exist +#: src/modules/ProductCreator.rb:3368 msgid "%1 package not available." msgstr "%1 패키지가 사용가능하지 않습니다." -#. change the label -#. copy the packages -#: src/modules/ProductCreator.rb:3424 src/modules/ProductCreator.rb:3563 +#. change the label +#. copy the packages +#: src/modules/ProductCreator.rb:3424 src/modules/ProductCreator.rb:3563 msgid "Copying %1" msgstr "%1를 복사중" -#. string dir = basedir + product_map[source]:"/" + datadir + "/" + package["arch"]:""; -#: src/modules/ProductCreator.rb:3599 +#. string dir = basedir + product_map[source]:"/" + datadir + "/" + package["arch"]:""; +#: src/modules/ProductCreator.rb:3599 msgid "" "Cannot download package %1\n" " from source %2.\n" @@ -2286,7 +2170,7 @@ "원본 %2에서 %1 패키지를\n" " 다운로드할 수 없습니다.\n" -#: src/modules/ProductCreator.rb:3616 +#: src/modules/ProductCreator.rb:3616 msgid "" "Error while copying packages. \n" "\t\t Check the created directory for possible hints." Modified: branches/SLE12-SP3/yast/ko/po/proxy.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/proxy.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/proxy.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,31 +14,31 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Informative label -#: src/include/proxy/dialogs.rb:101 +#. Informative label +#: src/include/proxy/dialogs.rb:101 msgid "No details available." msgstr "사용할 수 있는 세부사항 없음" -#. A push button -#: src/include/proxy/dialogs.rb:104 +#. A push button +#: src/include/proxy/dialogs.rb:104 msgid "&Details <<" msgstr "세부사항(&D) <<" -#. avoid confusing Emacs -#. A push button -#: src/include/proxy/dialogs.rb:106 +#. avoid confusing Emacs +#. A push button +#: src/include/proxy/dialogs.rb:106 msgid "&Details >>" msgstr "세부사항(&D) >>" -#. The default error code, replaced with the current error code got from proxy if any code found -#: src/include/proxy/dialogs.rb:173 +#. The default error code, replaced with the current error code got from proxy if any code found +#: src/include/proxy/dialogs.rb:173 msgid "Unknown Error Code" msgstr "알 수 없는 오류 코드" -#. Error message, -#. %1 is a string "HTTP", "HTTPS" or "FTP" -#. %2 is an error string such as "HTTP/1.0 403 Forbidden" -#: src/include/proxy/dialogs.rb:191 +#. Error message, +#. %1 is a string "HTTP", "HTTPS" or "FTP" +#. %2 is an error string such as "HTTP/1.0 403 Forbidden" +#: src/include/proxy/dialogs.rb:191 msgid "" "An error occurred during the %1 proxy test.\n" "Proxy return code: %2.\n" @@ -46,10 +46,10 @@ "%1 프록시 테스트 중에 오류가 발생했습니다.\n" "프록시 반환 코드: %2.\n" -#. Unknown return code, -#. %1 is the string HTTP, "HTTPS" or FTP, -#. %2 is an error string such as "HTTP/1.0 403 Forbidden" -#: src/include/proxy/dialogs.rb:206 +#. Unknown return code, +#. %1 is the string HTTP, "HTTPS" or FTP, +#. %2 is an error string such as "HTTP/1.0 403 Forbidden" +#: src/include/proxy/dialogs.rb:206 msgid "" "An unknown error occurred during the %1 proxy test.\n" "Proxy return code: %2.\n" @@ -57,55 +57,52 @@ "%1 프록시 테스트 중에 알 수 없는 오류가 발생했습니다.\n" "프록시 반환 코드: %2.\n" -#. An informative popup label diring the proxy testings -#: src/include/proxy/dialogs.rb:227 +#. An informative popup label diring the proxy testings +#: src/include/proxy/dialogs.rb:227 msgid "Testing the current proxy settings..." msgstr "현재 프록시 설정 테스트 중..." -#. TRANSLATORS: Error popup message -#: src/include/proxy/dialogs.rb:237 +#. TRANSLATORS: Error popup message +#: src/include/proxy/dialogs.rb:237 msgid "An error occurred during the HTTP proxy test." msgstr "HTTP 프록시 테스트 중에 오류가 발생했습니다." -#. TRANSLATORS: Error popup message -#: src/include/proxy/dialogs.rb:259 +#. TRANSLATORS: Error popup message +#: src/include/proxy/dialogs.rb:259 msgid "An error occurred during the HTTPS proxy test." msgstr "HTTPS 프록시 테스트 중에 오류가 발생했습니다." -#. TRANSLATORS: Error popup message -#: src/include/proxy/dialogs.rb:281 +#. TRANSLATORS: Error popup message +#: src/include/proxy/dialogs.rb:281 msgid "An error occurred during the FTP proxy test." msgstr "FTP 프록시 테스트 중에 오류가 발생했습니다." -#. Popup message -#: src/include/proxy/dialogs.rb:299 +#. Popup message +#: src/include/proxy/dialogs.rb:299 msgid "Proxy settings work correctly." msgstr "프록시 설정이 올바르게 작동합니다." -#. Proxy dialog caption -#. Commandline help title -#: src/include/proxy/dialogs.rb:399 src/lib/proxy/client.rb:27 +#. Proxy dialog caption +#. Commandline help title +#: src/include/proxy/dialogs.rb:399 src/lib/proxy/client.rb:27 msgid "Proxy Configuration" msgstr "프록시 구성" -#. Proxy dialog help 1/8 -#: src/include/proxy/dialogs.rb:405 +#. Proxy dialog help 1/8 +#: src/include/proxy/dialogs.rb:405 msgid "" "<p>Configure your Internet proxy (caching) settings here.</p>\n" -"<p><b>Note:</b> It is generally recommended to relogin for the settings to " -"take effect, \n" -"however in some cases the application may pick up new settings immediately. " -"Please check \n" +"<p><b>Note:</b> It is generally recommended to relogin for the settings to take effect, \n" +"however in some cases the application may pick up new settings immediately. Please check \n" "what your application (web browser, ftp client,...) supports. </p>" msgstr "" "<p>사용자의 인터넷 프록시(캐싱) 설정은 이곳에서 구성할 수 있습니다.</p>\n" "<p><b>참고:</b> 설정을 적용하려면 다시 로그인해야 하지만 응용 프로그램에 \n" -"따라서 새로운 설정을 바로 적용시키는 것도 있습니다.사용하는 응용 프로그램이 " -"이를\n" +"따라서 새로운 설정을 바로 적용시키는 것도 있습니다.사용하는 응용 프로그램이 이를\n" "지원하는지 확인 해보십시오.(웹 브라우저, ftp 클라이언트,...). </p>" -#. Proxy dialog help 2/8 -#: src/include/proxy/dialogs.rb:412 +#. Proxy dialog help 2/8 +#: src/include/proxy/dialogs.rb:412 msgid "" "<p><b>HTTP Proxy URL</b> is the name of the proxy server for your access\n" "to the World Wide Web (WWW).</p>\n" @@ -113,33 +110,31 @@ "<p><b>HTTP 프록시 URL</b>은 WWW(World Wide Web)로의 액세스를 위한\n" "프록시 서버의 이름입니다.</p>\n" -#. Proxy dialog help 3/8 -#: src/include/proxy/dialogs.rb:416 +#. Proxy dialog help 3/8 +#: src/include/proxy/dialogs.rb:416 msgid "" -"<p><b>HTTPS Proxy URL</b> is the name of the proxy server for your secured " -"access\n" +"<p><b>HTTPS Proxy URL</b> is the name of the proxy server for your secured access\n" "to the World Wide Web (WWW).</p>\n" msgstr "" "<p><b>HTTPS 프록시 URL</b>은 WWW(World Wide Web)로의 안전한 액세스를 위한\n" "프록시 서버의 이름입니다.</p>\n" -#. Proxy dialog help 3.5/8 -#: src/include/proxy/dialogs.rb:420 +#. Proxy dialog help 3.5/8 +#: src/include/proxy/dialogs.rb:420 msgid "<p>Example: <i>http://proxy.example.com:3128/</i></p>" msgstr "<p>예: <i>http://proxy.example.com:3128/</i></p>" -#. Proxy dialog help 4/8 -#: src/include/proxy/dialogs.rb:422 +#. Proxy dialog help 4/8 +#: src/include/proxy/dialogs.rb:422 msgid "" "<p><b>FTP Proxy URL</b> is the name of the proxy server for your access\n" "to the file transfer services (FTP).</p>" msgstr "" -"<p><b>FTP 프록시 URL</b>는 여러분이 FTP(file transfer services)에 접속을 하" -"기 위한\n" +"<p><b>FTP 프록시 URL</b>는 여러분이 FTP(file transfer services)에 접속을 하기 위한\n" "프록시 서버의 이름입니다.</p>" -#. Proxy dialog help 5/8 -#: src/include/proxy/dialogs.rb:426 +#. Proxy dialog help 5/8 +#: src/include/proxy/dialogs.rb:426 msgid "" "<p>If you check <b>Use the Same Proxy for All Protocols</b>, it is\n" "enough to fill in the HTTP proxy URL. It will be used for all protocols\n" @@ -149,8 +144,8 @@ "HTTP 프록시 URL만 입력하면 됩니다. 모든 프로토콜(HTTP, HTTPS 및 FTP)에\n" "사용됩니다.\n" -#. Proxy dialog help 6/8 -#: src/include/proxy/dialogs.rb:433 +#. Proxy dialog help 6/8 +#: src/include/proxy/dialogs.rb:433 msgid "" "<p><b>No Proxy Domains</b> is a comma-separated list of domains\n" "for which the requests should be made directly without caching,\n" @@ -160,21 +155,19 @@ "수행되는, 쉼표로 구분된 도메인 목록입니다\n" " (예: <i>%1</i>).</p>\n" -#. Proxy dialog help 7/8 -#: src/include/proxy/dialogs.rb:442 +#. Proxy dialog help 7/8 +#: src/include/proxy/dialogs.rb:442 msgid "" "<p>If you are using a proxy server with authorization, enter\n" "the <b>Proxy User Name</b> and <b>Proxy Password</b>. A valid username\n" -"consists of printable ASCII characters only (except for quotation marks).\n" +"consists of printable ASCII characters only (except for quotation marks).</p>\n" msgstr "" "<p>인증과 함께 프록시 서버를 사용하는 경우\n" -"<b>프록시 사용자 이름</b> 및 <b>프록시 비밀번호</b>를 입력하십시오. 유효한 사" -"용자 이름은\n" +"<b>프록시 사용자 이름</b> 및 <b>프록시 비밀번호</b>를 입력하십시오. 유효한 사용자 이름은\n" "인쇄 가능한 ASCII 문자로만 구성됩니다(따옴표 제외).</p>\n" -#. Proxy dialog help 8/8 -#: src/include/proxy/dialogs.rb:450 +#. Proxy dialog help 8/8 +#: src/include/proxy/dialogs.rb:450 msgid "" "<p>Press <b>Test Proxy Settings</b> to test\n" "the current configuration for HTTP, HTTPS, and FTP proxy.</p> \n" @@ -182,61 +175,61 @@ "<p>HTTP, HTTPS 및 FTP 프록시용 현재 구성을 테스트하려면\n" " <b>프록시 설정 테스트</b>를 누르십시오.</p> \n" -#. CheckBox entry label -#: src/include/proxy/dialogs.rb:467 +#. CheckBox entry label +#: src/include/proxy/dialogs.rb:467 msgid "&Enable Proxy" msgstr "프록시 활성화(&E)" -#. Frame label -#: src/include/proxy/dialogs.rb:473 +#. Frame label +#: src/include/proxy/dialogs.rb:473 msgid "Proxy Settings" msgstr "프록시 설정" -#. Text entry label -#: src/include/proxy/dialogs.rb:479 +#. Text entry label +#: src/include/proxy/dialogs.rb:479 msgid "&HTTP Proxy URL" msgstr "HTTP 프록시 URL(&H)" -#: src/include/proxy/dialogs.rb:481 +#: src/include/proxy/dialogs.rb:481 msgid "HTTP&S Proxy URL" msgstr "HTTPS 프록시 URL(&S)" -#. Text entry label -#: src/include/proxy/dialogs.rb:484 +#. Text entry label +#: src/include/proxy/dialogs.rb:484 msgid "F&TP Proxy URL" msgstr "FTP 프록시 URL(&T)" -#: src/include/proxy/dialogs.rb:490 +#: src/include/proxy/dialogs.rb:490 msgid "Us&e the Same Proxy for All Protocols" msgstr "모든 프로토콜에 동일한 프록시 사용(&E)" -#. Text entry label -#. domains without proxying -#: src/include/proxy/dialogs.rb:495 +#. Text entry label +#. domains without proxying +#: src/include/proxy/dialogs.rb:495 msgid "No Proxy &Domains" msgstr "프록시를 사용하지 않는 도메인(&D)" -#: src/include/proxy/dialogs.rb:504 +#: src/include/proxy/dialogs.rb:504 msgid "Proxy Authentication" msgstr "프록시 인증" -#. Text entry label -#: src/include/proxy/dialogs.rb:513 +#. Text entry label +#: src/include/proxy/dialogs.rb:513 msgid "Proxy &User Name" msgstr "프록시 사용자 이름(&U)" -#. Password entry label -#: src/include/proxy/dialogs.rb:521 +#. Password entry label +#: src/include/proxy/dialogs.rb:521 msgid "Proxy &Password" msgstr "프록시 비밀번호(&P)" -#. Test Proxy Settings - push button -#: src/include/proxy/dialogs.rb:533 +#. Test Proxy Settings - push button +#: src/include/proxy/dialogs.rb:533 msgid "Test Pr&oxy Settings" msgstr "프록시 설정 테스트(&X)" -#. Popup error text - http, https and ftp proxy URLs are blank -#: src/include/proxy/dialogs.rb:615 +#. Popup error text - http, https and ftp proxy URLs are blank +#: src/include/proxy/dialogs.rb:615 msgid "" "Proxy is enabled, but no proxy URL has been specified.\n" "Really use these settings?" @@ -244,7 +237,7 @@ "프록시가 활성화되어 있지만 지정된 프록시 URL이 없습니다.\n" "이 설정을 사용하시겠습니까?" -#: src/include/proxy/dialogs.rb:628 +#: src/include/proxy/dialogs.rb:628 msgid "" "Security warning:\n" "Username and password will be stored unencrypted\n" @@ -252,48 +245,47 @@ "Really use these settings?" msgstr "" "보안 경고:\n" -"사용자 이름 및 비밀번호는 전 세계에서 읽을 수 있는 일반 텍스트 파일에 암호화" -"되지 않은 상태로\n" +"사용자 이름 및 비밀번호는 전 세계에서 읽을 수 있는 일반 텍스트 파일에 암호화되지 않은 상태로\n" "저장됩니다.\n" "이러한 설정을 사용하시겠습니까?" -#. Popup::Error text -#: src/include/proxy/dialogs.rb:643 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:643 msgid "You cannot enter a password and leave the user name empty." msgstr "비밀번호를 입력하지 않았고 사용자 이름을 비워두었습니다." -#. Popup::Error text -#: src/include/proxy/dialogs.rb:651 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:651 msgid "HTTP proxy URL is invalid." msgstr "HTTP 프록시 URL은 부적당 합니다." -#. Popup::Error text -#: src/include/proxy/dialogs.rb:659 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:659 msgid "HTTP proxy URL must contain a scheme specification (http)." msgstr "HTTP 프록시 URL은 스키마 명세서(http)에 포함해야만 합니다." -#. Popup::Error text -#: src/include/proxy/dialogs.rb:668 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:668 msgid "The HTTPS proxy URL is invalid." msgstr "HTTPS 프록시 URL이 잘못되었습니다." -#. Popup::Error text -#: src/include/proxy/dialogs.rb:676 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:676 msgid "The HTTPS proxy URL must contain a scheme specification (http)." msgstr "HTTPS 프록시 URL에는 스키마 명세(http)를 포함해야 합니다." -#. Popup::Error text -#: src/include/proxy/dialogs.rb:687 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:687 msgid "FTP proxy URL is invalid." msgstr "FTP 프록시 URL은 부적당 합니다." -#. Popup::Error text -#: src/include/proxy/dialogs.rb:695 +#. Popup::Error text +#: src/include/proxy/dialogs.rb:695 msgid "FTP proxy URL must contain a scheme specification (http)." msgstr "FTP 프록시 URL은 스키마 명세서(http)에 포함해야 합니다." -#. Translators: no proxy domain is a domain that can be accessed without proxy -#: src/include/proxy/dialogs.rb:705 +#. Translators: no proxy domain is a domain that can be accessed without proxy +#: src/include/proxy/dialogs.rb:705 msgid "" "One or more no proxy domains are invalid. \n" "Check if all domains match one of the following:\n" @@ -309,140 +301,140 @@ "* 전체 호스트 이름\n" "* '.' 문자가 앞에 오는 도메인 이름" -#. Return a modification status -#. @return true if data was modified -#: src/lib/proxy/auto_client.rb:104 +#. Return a modification status +#. @return true if data was modified +#: src/lib/proxy/auto_client.rb:104 msgid "Status of Proxy Configuration" msgstr "프록시 구성 상태" -#: src/lib/proxy/auto_client.rb:105 +#: src/lib/proxy/auto_client.rb:105 msgid "Enabled" msgstr "활성화됨" -#: src/lib/proxy/auto_client.rb:107 +#: src/lib/proxy/auto_client.rb:107 msgid "HTTP" msgstr "HTTP" -#: src/lib/proxy/auto_client.rb:111 +#: src/lib/proxy/auto_client.rb:111 msgid "HTTPS" msgstr "HTTPS" -#: src/lib/proxy/auto_client.rb:115 +#: src/lib/proxy/auto_client.rb:115 msgid "FTP" msgstr "FTP" -#. command-line help -#: src/lib/proxy/client.rb:35 +#. command-line help +#: src/lib/proxy/client.rb:35 msgid "Enable proxy settings" msgstr "프록시 설정 활성화" -#. command-line help -#: src/lib/proxy/client.rb:43 +#. command-line help +#: src/lib/proxy/client.rb:43 msgid "Disable proxy settings" msgstr "프록시 설정 비활성화" -#. command-line help -#: src/lib/proxy/client.rb:51 +#. command-line help +#: src/lib/proxy/client.rb:51 msgid "Change the current proxy settings" msgstr "현재 프록시 설정 변경" -#. command-line help -#: src/lib/proxy/client.rb:61 +#. command-line help +#: src/lib/proxy/client.rb:61 msgid "Set the authentication for proxy" msgstr "프록시에 대한 인증을 설정합니다." -#. command-line help -#: src/lib/proxy/client.rb:71 +#. command-line help +#: src/lib/proxy/client.rb:71 msgid "Show the summary of the current settings" msgstr "현재 설정의 요약을 표시합니다." -#. command-line option help -#: src/lib/proxy/client.rb:83 +#. command-line option help +#: src/lib/proxy/client.rb:83 msgid "Set HTTP proxy" msgstr "HTTP 프록시를 설정합니다." -#. command-line option help -#: src/lib/proxy/client.rb:88 +#. command-line option help +#: src/lib/proxy/client.rb:88 msgid "Set HTTPS proxy" msgstr "HTTPS 프록시를 설정합니다." -#. command-line option help -#: src/lib/proxy/client.rb:93 +#. command-line option help +#: src/lib/proxy/client.rb:93 msgid "Set FTP proxy" msgstr "FTP 프록시를 설정합니다." -#. command-line option help -#: src/lib/proxy/client.rb:98 +#. command-line option help +#: src/lib/proxy/client.rb:98 msgid "Clear all options listed" msgstr "열거된 모든 옵션을 지웁니다." -#. command-line option help -#: src/lib/proxy/client.rb:102 +#. command-line option help +#: src/lib/proxy/client.rb:102 msgid "Set domains for not using the proxy settings" msgstr "프록시 설정을 사용하지 않도록 도메인을 설정합니다." -#. command-line option help -#: src/lib/proxy/client.rb:109 +#. command-line option help +#: src/lib/proxy/client.rb:109 msgid "The username to be used for proxy authentication" msgstr "프록시 인증에 사용할 사용자 이름" -#. command-line option help -#: src/lib/proxy/client.rb:116 +#. command-line option help +#: src/lib/proxy/client.rb:116 msgid "The password to be used for proxy authentication" msgstr "프록시 인증에 사용할 비밀번호" -#. ask the user -#. translators: command line prompt for entering a password -#: src/lib/proxy/client.rb:233 +#. ask the user +#. translators: command line prompt for entering a password +#: src/lib/proxy/client.rb:233 msgid "Password:" msgstr "비밀번호:" -#. Popup headline -#: src/modules/Proxy.rb:38 +#. Popup headline +#: src/modules/Proxy.rb:38 msgid "Proxy Configuration Successfully Saved" msgstr "Proxy 설정이 성공적으로 저장 되었습니다." -#: src/modules/Proxy.rb:39 +#: src/modules/Proxy.rb:39 msgid "It is recommended to relogin to make new proxy settings effective." msgstr "새 프록시 설정을 적용하려면 다시 로그인하는 것이 좋습니다." -#. Write proxy settings and apply changes -#. @return true if success -#: src/modules/Proxy.rb:174 +#. Write proxy settings and apply changes +#. @return true if success +#: src/modules/Proxy.rb:174 msgid "Update proxy configuration" msgstr "프록시 구성 업데이트" -#: src/modules/Proxy.rb:176 +#: src/modules/Proxy.rb:176 msgid "Saving Proxy Configuration" msgstr "프록시 구성 저장 중" -#. sleep for longer time, so that progress does not disappear right afterwards -#. but only when Progress is visible -#: src/modules/Proxy.rb:184 +#. sleep for longer time, so that progress does not disappear right afterwards +#. but only when Progress is visible +#: src/modules/Proxy.rb:184 msgid "Updating proxy configuration..." msgstr "프록시 구성 업데이트 중..." -#. Summary text -#: src/modules/Proxy.rb:418 +#. Summary text +#: src/modules/Proxy.rb:418 msgid "Proxy is disabled." msgstr "Proxy가 비활성화 되었습니다." -#. Summary text -#: src/modules/Proxy.rb:423 +#. Summary text +#: src/modules/Proxy.rb:423 msgid "Proxy is enabled." msgstr "프록시 활성화" -#. Summary text -#: src/modules/Proxy.rb:432 +#. Summary text +#: src/modules/Proxy.rb:432 msgid "HTTP Proxy: %1" msgstr "HTTP 프록시: %1" -#. Summary text -#: src/modules/Proxy.rb:440 +#. Summary text +#: src/modules/Proxy.rb:440 msgid "HTTPS Proxy: %1" msgstr "HTTPS 프록시: %1" -#. Summary text -#: src/modules/Proxy.rb:447 +#. Summary text +#: src/modules/Proxy.rb:447 msgid "FTP Proxy: %1" msgstr "FTP 프록시: %1" Modified: branches/SLE12-SP3/yast/ko/po/qt-pkg.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/qt-pkg.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/qt-pkg.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,1673 +14,1473 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#: src/YQPackageSelector.cc:318 +#: src/YQPackageSelector.cc:318 msgid "&Update Problems" msgstr "업데이트 문제(&U)" -#: src/YQPackageSelector.cc:345 +#: src/YQPackageSelector.cc:345 msgid "Patter&ns" msgstr "패턴(&N)" -#: src/YQPackageSelector.cc:367 +#: src/YQPackageSelector.cc:367 msgid "Package &Groups" msgstr "패키지 그룹(&G)" -#: src/YQPackageSelector.cc:379 +#: src/YQPackageSelector.cc:379 msgid "&RPM Groups" msgstr "RPM 그룹(&R)" -#: src/YQPackageSelector.cc:392 +#: src/YQPackageSelector.cc:392 msgid "&Languages" msgstr "언어(&L)" -#: src/YQPackageSelector.cc:408 +#: src/YQPackageSelector.cc:408 msgid "&Repositories" msgstr "리포지토리(&R)" -#: src/YQPackageSelector.cc:422 +#: src/YQPackageSelector.cc:422 msgid "S&earch" msgstr "검색(&E)" -#. DEBUG -#: src/YQPackageSelector.cc:429 src/YQPkgSearchFilterView.cc:114 +#. DEBUG +#: src/YQPackageSelector.cc:429 src/YQPkgSearchFilterView.cc:114 msgid "&Keywords" msgstr "키워드(&K)" -#: src/YQPackageSelector.cc:438 +#: src/YQPackageSelector.cc:438 msgid "&Installation Summary" msgstr "설치 요약(&I)" -#: src/YQPackageSelector.cc:526 +#: src/YQPackageSelector.cc:526 msgid "D&escription" msgstr "설명(&E)" -#: src/YQPackageSelector.cc:539 +#: src/YQPackageSelector.cc:539 msgid "&Technical Data" msgstr "기술 데이터(&T)" -#: src/YQPackageSelector.cc:552 src/YQPkgProductDialog.cc:115 +#: src/YQPackageSelector.cc:552 src/YQPkgProductDialog.cc:115 msgid "Dependencies" msgstr "종속성" -#: src/YQPackageSelector.cc:567 +#: src/YQPackageSelector.cc:567 msgid "&Versions" msgstr "버전(&V)" -#: src/YQPackageSelector.cc:585 +#: src/YQPackageSelector.cc:585 msgid "File List" msgstr "파일 목록" -#: src/YQPackageSelector.cc:602 +#: src/YQPackageSelector.cc:602 msgid "Change Log" msgstr "로그 변경" -#. "Cancel" button -#. button #0 -#. text -#. button #0 -#: src/YQPackageSelector.cc:629 src/YQPackageSelectorBase.cc:194 -#: src/YQPackageSelectorBase.cc:305 src/YQPackageSelectorBase.cc:326 -#: src/YQPatternSelector.cc:259 src/YQPkgConflictDialog.cc:163 -#: src/YQPkgConflictDialog.cc:398 src/YQPkgSearchFilterView.cc:249 -#: src/YQPkgTextDialog.cc:258 src/YQPkgVersionsView.cc:413 -#: src/YQSimplePatchSelector.cc:219 +#. "Cancel" button +#. button #0 +#. text +#. button #0 +#: src/YQPackageSelector.cc:629 src/YQPackageSelectorBase.cc:194 +#: src/YQPackageSelectorBase.cc:305 src/YQPackageSelectorBase.cc:326 +#: src/YQPatternSelector.cc:259 src/YQPkgConflictDialog.cc:163 +#: src/YQPkgConflictDialog.cc:398 src/YQPkgSearchFilterView.cc:249 +#: src/YQPkgTextDialog.cc:258 src/YQPkgVersionsView.cc:413 +#: src/YQSimplePatchSelector.cc:219 msgid "&Cancel" msgstr "취소(&C)" -#. Translators: "Accept" here refers to licenses or similar -#: src/YQPackageSelector.cc:639 src/YQPatternSelector.cc:268 -#: src/YQPkgTextDialog.cc:258 src/YQSimplePatchSelector.cc:228 +#. Translators: "Accept" here refers to licenses or similar +#: src/YQPackageSelector.cc:639 src/YQPatternSelector.cc:268 +#: src/YQPkgTextDialog.cc:258 src/YQSimplePatchSelector.cc:228 msgid "&Accept" msgstr "승인(&A)" -#: src/YQPackageSelector.cc:682 +#: src/YQPackageSelector.cc:682 msgid "&File" msgstr "파일(&F)" -#: src/YQPackageSelector.cc:684 +#: src/YQPackageSelector.cc:684 msgid "&Import..." msgstr "임포트(&I)..." -#: src/YQPackageSelector.cc:685 +#: src/YQPackageSelector.cc:685 msgid "&Export..." msgstr "엑스포트(&E)..." -#: src/YQPackageSelector.cc:689 +#: src/YQPackageSelector.cc:689 msgid "E&xit -- Discard Changes" msgstr "종료(&X) -- 변경사항 삭제" -#: src/YQPackageSelector.cc:690 +#: src/YQPackageSelector.cc:690 msgid "&Quit -- Save Changes" msgstr "끝내기(&Q) -- 변경사항 저장" -#: src/YQPackageSelector.cc:702 +#: src/YQPackageSelector.cc:702 msgid "&Package" msgstr "패키지(&P)" -#: src/YQPackageSelector.cc:742 src/YQPkgPackageKitGroupsFilterView.cc:92 -#: src/YQPkgRepoFilterView.cc:149 +#: src/YQPackageSelector.cc:742 src/YQPkgPackageKitGroupsFilterView.cc:92 +#: src/YQPkgRepoFilterView.cc:149 msgid "All Packages" msgstr "모든 패키지" -#: src/YQPackageSelector.cc:744 src/YQPkgObjList.cc:430 +#: src/YQPackageSelector.cc:744 src/YQPkgObjList.cc:430 msgid "Update if newer version available" msgstr "최신 버전이 사용 가능한 경우 업데이트" #: src/YQPackageSelector.cc:747 src/YQPkgObjList.cc:415 -#: src/YQPkgObjList.cc:436 +#: src/YQPkgObjList.cc:436 msgid "Update unconditionally" msgstr "무조건 업데이트" -#: src/YQPackageSelector.cc:761 +#: src/YQPackageSelector.cc:761 msgid "&Patch" msgstr "패치(&P)" -#: src/YQPackageSelector.cc:788 +#: src/YQPackageSelector.cc:788 msgid "Confi&guration" msgstr "구성(&G)" -#: src/YQPackageSelector.cc:789 +#: src/YQPackageSelector.cc:789 msgid "&Repositories..." msgstr "리포지토리(&R)..." -#: src/YQPackageSelector.cc:790 +#: src/YQPackageSelector.cc:790 msgid "&Online Update..." msgstr "온라인 업데이트(&O)..." -#: src/YQPackageSelector.cc:800 +#: src/YQPackageSelector.cc:800 msgid "&Dependencies" msgstr "종속성(&D)" -#: src/YQPackageSelector.cc:802 +#: src/YQPackageSelector.cc:802 msgid "&Check Now" msgstr "지금 검사(&C)" -#: src/YQPackageSelector.cc:804 +#: src/YQPackageSelector.cc:804 msgid "&Autocheck" msgstr "자동 검사(&A)" -#: src/YQPackageSelector.cc:809 +#: src/YQPackageSelector.cc:809 msgid "Install &Recommended Packages" msgstr "권장 패키지 설치(&R)" -#. Translators: Menu for view options (Use a noun, not a verb!) -#: src/YQPackageSelector.cc:822 +#. Translators: Menu for view options (Use a noun, not a verb!) +#: src/YQPackageSelector.cc:822 msgid "&Options" msgstr "옵션(&O)" -#. Translators: This is about packages ending in "-devel", so don't translate that "-devel"! -#: src/YQPackageSelector.cc:825 +#. Translators: This is about packages ending in "-devel", so don't translate that "-devel"! +#: src/YQPackageSelector.cc:825 msgid "Show -de&vel Packages" msgstr "-devel 패키지 표시(&V)" -#. Translators: This is about packages ending in "-debuginfo", so don't translate that "-debuginfo"! -#: src/YQPackageSelector.cc:834 +#. Translators: This is about packages ending in "-debuginfo", so don't translate that "-debuginfo"! +#: src/YQPackageSelector.cc:834 msgid "Show -&debuginfo/-debugsource Packages" msgstr "-debuginfo/-debugsource 패키지 표시(&D)" -#: src/YQPackageSelector.cc:842 +#: src/YQPackageSelector.cc:842 msgid "&System Verification Mode" msgstr "시스템 확인 모드(&S)" -#: src/YQPackageSelector.cc:847 +#: src/YQPackageSelector.cc:847 msgid "&Cleanup when deleting packages" msgstr "패키지 삭제 시 정리(&C)" -#: src/YQPackageSelector.cc:851 +#: src/YQPackageSelector.cc:851 msgid "&Allow vendor change" msgstr "벤더 변경 허용(&A)" -#: src/YQPackageSelector.cc:864 +#: src/YQPackageSelector.cc:864 msgid "E&xtras" msgstr "기타(&X)" -#: src/YQPackageSelector.cc:866 +#: src/YQPackageSelector.cc:866 msgid "Show &Products" msgstr "제품 표시(&P)" -#: src/YQPackageSelector.cc:867 +#: src/YQPackageSelector.cc:867 msgid "Show P&ackage Changes" msgstr "패키지 변경사항 표시(&A)" -#: src/YQPackageSelector.cc:868 +#: src/YQPackageSelector.cc:868 msgid "Show &History" msgstr "이력 표시(&H)" -#. Translators: This is about packages ending in "-devel", so don't translate that "-devel"! -#: src/YQPackageSelector.cc:876 +#. Translators: This is about packages ending in "-devel", so don't translate that "-devel"! +#: src/YQPackageSelector.cc:876 msgid "Install All Matching -&devel Packages" msgstr "일치하는 모든 -devel 패키지 설치(&D)" -#. Translators: This is about packages ending in "-debuginfo", so don't translate that "-debuginfo"! -#: src/YQPackageSelector.cc:880 +#. Translators: This is about packages ending in "-debuginfo", so don't translate that "-debuginfo"! +#: src/YQPackageSelector.cc:880 msgid "Install All Matching -de&buginfo Packages" msgstr "일치하는 모든 -debuginfo 패키지 설치(&B)" -#. Translators: This is about packages ending in "-debugsource", so don't translate that "-debugsource"! -#: src/YQPackageSelector.cc:883 +#. Translators: This is about packages ending in "-debugsource", so don't translate that "-debugsource"! +#: src/YQPackageSelector.cc:883 msgid "Install All Matching -debug&source Packages" msgstr "일치하는 모든 -debugsource 패키지 설치(&S)" -#: src/YQPackageSelector.cc:885 +#: src/YQPackageSelector.cc:885 msgid "Install All Matching &Recommended Packages" msgstr "모든 일치하는 권장 패키지 설치(&R)" -#: src/YQPackageSelector.cc:891 +#: src/YQPackageSelector.cc:891 msgid "Generate Dependency Resolver &Test Case" msgstr "종속성 확인자 테스트 사례 생성(&T)" -#: src/YQPackageSelector.cc:911 +#: src/YQPackageSelector.cc:911 msgid "&Help" msgstr "도움말(&H)" -#. Note: The help functions and their texts are moved out -#. to a separate source file YQPackageSelectorHelp.cc -#. Menu entry for help overview -#: src/YQPackageSelector.cc:917 +#. Note: The help functions and their texts are moved out +#. to a separate source file YQPackageSelectorHelp.cc +#. Menu entry for help overview +#: src/YQPackageSelector.cc:917 msgid "&Overview" msgstr "개요(&O)" -#. Menu entry for help about used symbols ( icons ) -#: src/YQPackageSelector.cc:920 +#. Menu entry for help about used symbols ( icons ) +#: src/YQPackageSelector.cc:920 msgid "&Symbols" msgstr "기호(&S)" -#. Menu entry for keyboard help -#: src/YQPackageSelector.cc:923 +#. Menu entry for keyboard help +#: src/YQPackageSelector.cc:923 msgid "&Keys" msgstr "키(&K)" -#: src/YQPackageSelector.cc:1109 +#: src/YQPackageSelector.cc:1109 msgid "All package dependencies are OK." msgstr "모든 패키지의 종속성이 정상입니다." -#: src/YQPackageSelector.cc:1125 +#: src/YQPackageSelector.cc:1125 msgid "P&atches" msgstr "패치(&A)" -#. startsWith -#. filter -#: src/YQPackageSelector.cc:1187 +#. startsWith +#. filter +#: src/YQPackageSelector.cc:1187 msgid "Save Package List" msgstr "패키지 목록 저장" -#. Post error popup -#. parent -#. Post error popup. -#. parent -#: src/YQPackageSelector.cc:1226 src/YQPackageSelector.cc:1320 -#: src/YQPkgConflictDialog.cc:425 src/YQPkgConflictList.cc:201 -#: src/YQPkgList.cc:605 +#. Post error popup +#. parent +#. Post error popup. +#. parent +#: src/YQPackageSelector.cc:1226 src/YQPackageSelector.cc:1320 +#: src/YQPkgConflictDialog.cc:425 src/YQPkgConflictList.cc:201 +#: src/YQPkgList.cc:605 msgid "Error" msgstr "오류" -#. caption -#: src/YQPackageSelector.cc:1227 +#. caption +#: src/YQPackageSelector.cc:1227 msgid "Error exporting package list to %1" msgstr "%1(으)로 패키지 목록을 엑스포트하는 중 오류가 발생했습니다." -#: src/YQPackageSelector.cc:1239 +#: src/YQPackageSelector.cc:1239 msgid "Load Package List" msgstr "패키지 목록 로드" -#. caption -#: src/YQPackageSelector.cc:1321 +#. caption +#: src/YQPackageSelector.cc:1321 msgid "Error loading package list from %1" msgstr "%1에서 패키지 목록을 로드하는 중 오류가 발생했습니다." -#. caption -#. Translators: %1 is the number of affected packages -#: src/YQPackageSelector.cc:1423 +#. caption +#. Translators: %1 is the number of affected packages +#: src/YQPackageSelector.cc:1423 msgid "%1 packages will be updated" msgstr "%1 패키지가 업데이트됩니다." -#: src/YQPackageSelector.cc:1424 +#: src/YQPackageSelector.cc:1424 msgid "&Continue" msgstr "계속(&C)" -#: src/YQPackageSelector.cc:1424 +#: src/YQPackageSelector.cc:1424 msgid "C&ancel" msgstr "취소(&A)" -#: src/YQPackageSelector.cc:1463 -msgid "" -"<p><small>Cancel switching</a> system " -"packages to versions in repository %2</small></p>" -msgstr "" -"<p><small>리포지토리 %2의 버전으로 시스템 패키지 전환 취소</a></small></p>" +#: src/YQPackageSelector.cc:1463 +msgid "<p><small>Cancel switching</a> system packages to versions in repository %2</small></p>" +msgstr "<p><small>리포지토리 %2의 버전으로 시스템 패키지 전환 취소</a></small></p>" -#: src/YQPackageSelector.cc:1482 -msgid "" -"<p>Switch system packages</a> to the " -"versions in this repository (%2)</p>" -msgstr "" -"<p>이 리포지토리(%2)의 버전으로 시스템 패키" -"지 전환</a></p>" +#: src/YQPackageSelector.cc:1482 +msgid "<p>Switch system packages</a> to the versions in this repository (%2)</p>" +msgstr "<p>이 리포지토리(%2)의 버전으로 시스템 패키지 전환</a></p>" -#: src/YQPackageSelector.cc:1571 src/YQPackageSelector.cc:1726 +#: src/YQPackageSelector.cc:1571 src/YQPackageSelector.cc:1726 msgid "Added Subpackages:" msgstr "추가된 하위 패키지:" -#. "OK" button -#. addHStretch( hbox ); -#. "OK" button -#: src/YQPackageSelector.cc:1572 src/YQPackageSelector.cc:1728 -#: src/YQPackageSelectorBase.cc:214 src/YQPkgDescriptionDialog.cc:120 -#: src/YQPkgDiskUsageList.cc:156 src/YQPkgDiskUsageList.cc:165 -#: src/YQPkgProductDialog.cc:135 src/YQPkgTextDialog.cc:71 +#. "OK" button +#. addHStretch( hbox ); +#. "OK" button +#: src/YQPackageSelector.cc:1572 src/YQPackageSelector.cc:1728 +#: src/YQPackageSelectorBase.cc:214 src/YQPkgDescriptionDialog.cc:120 +#: src/YQPkgDiskUsageList.cc:156 src/YQPkgDiskUsageList.cc:165 +#: src/YQPkgProductDialog.cc:135 src/YQPkgTextDialog.cc:71 msgid "&OK" msgstr "확인(&O)" -#: src/YQPackageSelectorBase.cc:93 +#: src/YQPackageSelectorBase.cc:93 msgid "Reset &Ignored Dependency Conflicts" msgstr "무시한 종속성 충돌 재설정(&I)" -#: src/YQPackageSelectorBase.cc:164 +#: src/YQPackageSelectorBase.cc:164 msgid "System dependencies verify OK." msgstr "시스템 종속성 확인에 문제가 없습니다." -#. Translators: RichText ( HTML-like ) format -#: src/YQPackageSelectorBase.cc:185 +#. Translators: RichText ( HTML-like ) format +#: src/YQPackageSelectorBase.cc:185 msgid "Error: Out of disk space!" msgstr "오류: 디스크 공간이 부족합니다!" -#: src/YQPackageSelectorBase.cc:186 -msgid "" -"<p>You can choose to install anyway if you know what you are doing, but you " -"risk getting a corrupted system that requires manual repairs. If you are not " -"absolutely sure how to handle such a case, press <b>Cancel</b> now and " -"deselect some packages.</p>" -msgstr "" -"<p>어떤 일을 하는지 알고 있다면 설치를 선택할 수 있지만, 수동 복구가 필요한 " -"시스템 오류가 발생할 위험이 있습니다. 그런 문제가 발생할 경우 어떻게 처리할지" -"를 모른다면 지금 <b>취소</b>를 누르고 일부 패키지를 선택 취소하십시오.</p>" +#: src/YQPackageSelectorBase.cc:186 +msgid "<p>You can choose to install anyway if you know what you are doing, but you risk getting a corrupted system that requires manual repairs. If you are not absolutely sure how to handle such a case, press <b>Cancel</b> now and deselect some packages.</p>" +msgstr "<p>어떤 일을 하는지 알고 있다면 설치를 선택할 수 있지만, 수동 복구가 필요한 시스템 오류가 발생할 위험이 있습니다. 그런 문제가 발생할 경우 어떻게 처리할지를 모른다면 지금 <b>취소</b>를 누르고 일부 패키지를 선택 취소하십시오.</p>" -#: src/YQPackageSelectorBase.cc:194 +#: src/YQPackageSelectorBase.cc:194 msgid "C&ontinue Anyway" msgstr "계속(&O)" -#: src/YQPackageSelectorBase.cc:208 +#: src/YQPackageSelectorBase.cc:208 msgid "The following items will be changed: " msgstr "다음 항목이 변경됩니다." -#: src/YQPackageSelectorBase.cc:248 +#: src/YQPackageSelectorBase.cc:248 msgid "Do you want to Abandon all changes and exit?" msgstr "모든 변경 사항을 취소하고 종료하시겠습니까?" -#: src/YQPackageSelectorBase.cc:249 +#: src/YQPackageSelectorBase.cc:249 msgid "&Yes" msgstr "예(&Y)" -#: src/YQPackageSelectorBase.cc:249 +#: src/YQPackageSelectorBase.cc:249 msgid "&No" msgstr "아니요(&N)" -#. Dialog header -#: src/YQPackageSelectorBase.cc:297 src/YQPkgChangesDialog.cc:116 +#. Dialog header +#: src/YQPackageSelectorBase.cc:297 src/YQPkgChangesDialog.cc:116 msgid "Automatic Changes" msgstr "자동 변경" -#: src/YQPackageSelectorBase.cc:301 -msgid "" -"In addition to your manual selections, the following packages have been " -"changed to resolve dependencies:" -msgstr "" -"수동 선택항목 외에 다음 패키지가 종속성을 해결하기 위해 변경되었습니다." +#: src/YQPackageSelectorBase.cc:301 +msgid "In addition to your manual selections, the following packages have been changed to resolve dependencies:" +msgstr "수동 선택항목 외에 다음 패키지가 종속성을 해결하기 위해 변경되었습니다." -#: src/YQPackageSelectorBase.cc:305 src/YQPackageSelectorBase.cc:326 -#: src/YQPkgConflictDialog.cc:397 src/YQPkgVersionsView.cc:412 +#: src/YQPackageSelectorBase.cc:305 src/YQPackageSelectorBase.cc:326 +#: src/YQPkgConflictDialog.cc:397 src/YQPkgVersionsView.cc:412 msgid "C&ontinue" msgstr "계속(&O)" -#. Dialog header -#: src/YQPackageSelectorBase.cc:318 +#. Dialog header +#: src/YQPackageSelectorBase.cc:318 msgid "Unsupported Packages" msgstr "지원되지 않는 패키지" -#: src/YQPackageSelectorBase.cc:322 -msgid "" -"Please realize that the following selected software is either unsupported or " -"requires an additional customer contract for support." -msgstr "" -"선택한 다음 소프트웨어는 지원되지 않거나, 지원을 위해 추가 고객 계약이 필요하" -"다는 점을 명심하십시오." +#: src/YQPackageSelectorBase.cc:322 +msgid "Please realize that the following selected software is either unsupported or requires an additional customer contract for support." +msgstr "선택한 다음 소프트웨어는 지원되지 않거나, 지원을 위해 추가 고객 계약이 필요하다는 점을 명심하십시오." -#: src/YQPackageSelectorBase.cc:421 +#: src/YQPackageSelectorBase.cc:421 msgid "Not implemented yet. Sorry." msgstr "죄송하지만, 아직 구현되지 않았습니다." -#. Translators: Headline for help about the package manager in general -#: src/YQPackageSelectorHelp.cc:62 +#. Translators: Headline for help about the package manager in general +#: src/YQPackageSelectorHelp.cc:62 msgid "The YaST Package Manager" msgstr "YaST 패키지 관리자" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:65 -msgid "" -"<b>Note:</b> This is a just a short overview. Refer to the manual for " -"details." -msgstr "" -"<b>참고:</b> 이것은 간단한 개요입니다. 자세한 내용은 설명서를 참조하십시오." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:65 +msgid "<b>Note:</b> This is a just a short overview. Refer to the manual for details." +msgstr "<b>참고:</b> 이것은 간단한 개요입니다. 자세한 내용은 설명서를 참조하십시오." -#. Help specific to online update mode -#: src/YQPackageSelectorHelp.cc:72 +#. Help specific to online update mode +#: src/YQPackageSelectorHelp.cc:72 msgid "In this dialog, select patches to download and install." msgstr "이 대화 상자에서 다운로드 및 설치할 패치를 선택하십시오." -#: src/YQPackageSelectorHelp.cc:73 -msgid "" -"The list on the left side contains available patches along with the " -"respective patch kind (security, recommended, or optional) and the " -"(estimated) download size." -msgstr "" -"왼쪽에 있는 목록에는 사용 가능한 패치가 각 패치 종류(보안, 권장 또는 선택) " -"및 다운로드 크기와 함께 표시됩니다." +#: src/YQPackageSelectorHelp.cc:73 +msgid "The list on the left side contains available patches along with the respective patch kind (security, recommended, or optional) and the (estimated) download size." +msgstr "왼쪽에 있는 목록에는 사용 가능한 패치가 각 패치 종류(보안, 권장 또는 선택) 및 다운로드 크기와 함께 표시됩니다." -#: src/YQPackageSelectorHelp.cc:76 -msgid "" -"This list normally contains only those patches that are not installed on " -"your system yet. You can change that with the <b>Include Installed Patches check box below the list." -msgstr "" -"일반적으로 이 목록은 시스템에 설치되지 않은 패치만 포함합니다. 목록 아래에 " -"<b>설치된 패치 포함</b> 항목을 선택하여 목록을 변경할 수 있습니다." +#: src/YQPackageSelectorHelp.cc:76 +msgid "This list normally contains only those patches that are not installed on your system yet. You can change that with the <b>Include Installed Patches</b> check box below the list." +msgstr "일반적으로 이 목록은 시스템에 설치되지 않은 패치만 포함합니다. 목록 아래에 <b>설치된 패치 포함</b> 항목을 선택하여 목록을 변경할 수 있습니다." -#: src/YQPackageSelectorHelp.cc:78 -msgid "" -"The <b>Patch Description</b> field contains a longer explanation of the " -"currently selected patch. Click a patch in the list to view its description " -"here." -msgstr "" -"<b>패치 설명</b> 필드는 현재 선택된 패치에 대한 긴 설명을 포함합니다. 목록에" -"서 패치를 클릭하면 목록에 대한 설명이 여기에 표시됩니다." +#: src/YQPackageSelectorHelp.cc:78 +msgid "The <b>Patch Description</b> field contains a longer explanation of the currently selected patch. Click a patch in the list to view its description here." +msgstr "<b>패치 설명</b> 필드는 현재 선택된 패치에 대한 긴 설명을 포함합니다. 목록에서 패치를 클릭하면 목록에 대한 설명이 여기에 표시됩니다." -#: src/YQPackageSelectorHelp.cc:80 -msgid "" -"The package list on the right side shows the contents of the currently " -"selected patch, i.e., the packages it contains. You cannot install or delete " -"individual packages from a patch, only the patch as a whole. This is " -"intentional to avoid system inconsistencies." -msgstr "" -"오른쪽에 있는 패키지 목록은 현재 선택된 패치의 내용 즉, 패치에 포함된 패키지" -"를 표시합니다. 패치는 패치 전체를 설치하거나 삭제할 수만 있고, 패치의 개별 패" -"키지를 설치하거나 삭제할 수 없습니다. 이것은 시스템 불일치를 피하기 위한 것입" -"니다." +#: src/YQPackageSelectorHelp.cc:80 +msgid "The package list on the right side shows the contents of the currently selected patch, i.e., the packages it contains. You cannot install or delete individual packages from a patch, only the patch as a whole. This is intentional to avoid system inconsistencies." +msgstr "오른쪽에 있는 패키지 목록은 현재 선택된 패치의 내용 즉, 패치에 포함된 패키지를 표시합니다. 패치는 패치 전체를 설치하거나 삭제할 수만 있고, 패치의 개별 패키지를 설치하거나 삭제할 수 없습니다. 이것은 시스템 불일치를 피하기 위한 것입니다." -#. Translators: Please keep the reference to "filter views" to distinguish between "filter views" that -#. affect the amount of visible packages in the package list and "details views" ( below the package list ) -#. that show details about the ( one ) currently selected package in the package list. -#: src/YQPackageSelectorHelp.cc:88 -msgid "" -"In addition to <b>Patches</b>, you can also select one of the other filter " -"views from <b>Filter</b> at the upper left:" -msgstr "" -"<b>패치</b> 외에도 왼쪽 상단의 <b>필터</b>에서 다른 필터 보기 중 하나를 선택" -"할 수 있습니다." +#. Translators: Please keep the reference to "filter views" to distinguish between "filter views" that +#. affect the amount of visible packages in the package list and "details views" ( below the package list ) +#. that show details about the ( one ) currently selected package in the package list. +#: src/YQPackageSelectorHelp.cc:88 +msgid "In addition to <b>Patches</b>, you can also select one of the other filter views from <b>Filter</b> at the upper left:" +msgstr "<b>패치</b> 외에도 왼쪽 상단의 <b>필터</b>에서 다른 필터 보기 중 하나를 선택할 수 있습니다." -#. Help specific to normal (non-online-update) mode -#: src/YQPackageSelectorHelp.cc:96 -msgid "" -"In this dialog, select which packages to install, update, or delete. You can " -"select individual packages or entire package \"selections\"." -msgstr "" -"이 대화 상자에서 설치, 업데이트 또는 삭제할 패키지를 선택하십시오. 개별 패키" -"지 또는 전체 패키지 \"선택항목\"을 선택할 수 있습니다." +#. Help specific to normal (non-online-update) mode +#: src/YQPackageSelectorHelp.cc:96 +msgid "In this dialog, select which packages to install, update, or delete. You can select individual packages or entire package \"selections\"." +msgstr "이 대화 상자에서 설치, 업데이트 또는 삭제할 패키지를 선택하십시오. 개별 패키지 또는 전체 패키지 \"선택항목\"을 선택할 수 있습니다." -#: src/YQPackageSelectorHelp.cc:98 -msgid "" -"Click the status icon for a package or selection to change the status or " -"right-click it to open a context menu." -msgstr "" -"상태를 변경할 패키지 또는 선택항목의 상태 아이콘을 클릭하거나 오른쪽 버튼으" -"로 클릭하여 상황별 메뉴를 여십시오." +#: src/YQPackageSelectorHelp.cc:98 +msgid "Click the status icon for a package or selection to change the status or right-click it to open a context menu." +msgstr "상태를 변경할 패키지 또는 선택항목의 상태 아이콘을 클릭하거나 오른쪽 버튼으로 클릭하여 상황별 메뉴를 여십시오." -#: src/YQPackageSelectorHelp.cc:100 -msgid "" -"Use the <b>Check Dependencies</b> button to resolve package dependencies. " -"Some packages require other packages to be installed. Some packages can only " -"be installed if certain other packages are not installed, too. This check " -"will automatically mark required packages for installation and it will warn " -"you if there are dependency conflicts." -msgstr "" -"패키지 종속성을 해결하려면 <b>종속성 검사</b> 버튼을 사용하십시오. 일부 패키" -"지는 다른 패키지를 설치해야 하고, 일부 패키지는 어떤 다른 패키지가 설치되어 " -"있지 않은 경우에만 설치될 수 있습니다. 이 검사는 자동으로 설치 필수 패키지를 " -"표시하고, 종속성 충돌이 있을 경우 경고합니다." +#: src/YQPackageSelectorHelp.cc:100 +msgid "Use the <b>Check Dependencies</b> button to resolve package dependencies. Some packages require other packages to be installed. Some packages can only be installed if certain other packages are not installed, too. This check will automatically mark required packages for installation and it will warn you if there are dependency conflicts." +msgstr "패키지 종속성을 해결하려면 <b>종속성 검사</b> 버튼을 사용하십시오. 일부 패키지는 다른 패키지를 설치해야 하고, 일부 패키지는 어떤 다른 패키지가 설치되어 있지 않은 경우에만 설치될 수 있습니다. 이 검사는 자동으로 설치 필수 패키지를 표시하고, 종속성 충돌이 있을 경우 경고합니다." -#: src/YQPackageSelectorHelp.cc:105 -msgid "" -"When you leave this dialog with <b>Accept</b>, this check will automatically " -"be performed." -msgstr "" -"<b>승인</b>을 선택하여 이 대화 상자를 종료하면 이 검사가 자동으로 수행됩니다." +#: src/YQPackageSelectorHelp.cc:105 +msgid "When you leave this dialog with <b>Accept</b>, this check will automatically be performed." +msgstr "<b>승인</b>을 선택하여 이 대화 상자를 종료하면 이 검사가 자동으로 수행됩니다." -#. Translators: Please keep the reference to "filter views" to distinguish between "filter views" that -#. affect the amount of visible packages in the package list and "details views" (below the package list) -#. that show details about the (one) currently selected package in the package list. -#: src/YQPackageSelectorHelp.cc:111 -msgid "" -"Select one of the available filter views with the <b>Filter</b> combo-box at " -"the upper left:" -msgstr "" -"왼쪽 상단의 <b>필터</b> 콤보박스로 사용 가능한 필터 보기 중 하나를 선택하십시" -"오." +#. Translators: Please keep the reference to "filter views" to distinguish between "filter views" that +#. affect the amount of visible packages in the package list and "details views" (below the package list) +#. that show details about the (one) currently selected package in the package list. +#: src/YQPackageSelectorHelp.cc:111 +msgid "Select one of the available filter views with the <b>Filter</b> combo-box at the upper left:" +msgstr "왼쪽 상단의 <b>필터</b> 콤보박스로 사용 가능한 필터 보기 중 하나를 선택하십시오." -#: src/YQPackageSelectorHelp.cc:115 -msgid "" -"<b>Selections</b> shows some predefined sets of packages that logically " -"belong together." -msgstr "" -"<b>선택항목</b>은 논리적으로 함께 속하는 일부 사전 정의된 패키지 세트를 표시" -"합니다." +#: src/YQPackageSelectorHelp.cc:115 +msgid "<b>Selections</b> shows some predefined sets of packages that logically belong together." +msgstr "<b>선택항목</b>은 논리적으로 함께 속하는 일부 사전 정의된 패키지 세트를 표시합니다." -#: src/YQPackageSelectorHelp.cc:116 -msgid "" -"Use the check box next to the selection to select it as a whole. You can " -"also select or deselect individual packages in the package list at the right." -msgstr "" -"전체적으로 선택하려면 선택항목 옆에 있는 체크박스를 사용하십시오. 오른쪽의 패" -"키지 목록에서 개별 패키지를 선택 또는 선택 취소할 수도 있습니다." +#: src/YQPackageSelectorHelp.cc:116 +msgid "Use the check box next to the selection to select it as a whole. You can also select or deselect individual packages in the package list at the right." +msgstr "전체적으로 선택하려면 선택항목 옆에 있는 체크박스를 사용하십시오. 오른쪽의 패키지 목록에서 개별 패키지를 선택 또는 선택 취소할 수도 있습니다." -#. Help common to all modes: Description of the various filter views -#: src/YQPackageSelectorHelp.cc:124 -msgid "" -"<b>Package Groups</b> shows packages by category. You can expand and " -"collapse tree items to refine or generalize categories. Click any category " -"to display the packages in that category in the package list on the right " -"side." -msgstr "" -"<b>패키지 그룹</b>은 범주별로 패키지를 표시합니다. 트리 항목을 확장 및 축소하" -"여 범주를 세분하거나 일반화할 수 있습니다. 오른쪽의 패키지 목록에서 범주를 클" -"릭하여 해당 범주의 패키지를 표시하십시오." +#. Help common to all modes: Description of the various filter views +#: src/YQPackageSelectorHelp.cc:124 +msgid "<b>Package Groups</b> shows packages by category. You can expand and collapse tree items to refine or generalize categories. Click any category to display the packages in that category in the package list on the right side." +msgstr "<b>패키지 그룹</b>은 범주별로 패키지를 표시합니다. 트리 항목을 확장 및 축소하여 범주를 세분하거나 일반화할 수 있습니다. 오른쪽의 패키지 목록에서 범주를 클릭하여 해당 범주의 패키지를 표시하십시오." -#: src/YQPackageSelectorHelp.cc:127 -msgid "" -" <b>Hint:</b> There is a \"zzz All\" entry at the very end of the list that " -"will show all packages. This may take a few seconds on slow machines." -msgstr "" -" <b>힌트:</b> 모든 패키지를 표시하는 목록 맨 끝에는 \"zzz All\" 항목이 표시됩" -"니다. 속도가 느린 시스템에서는 몇 초가 걸릴 수 있습니다." +#: src/YQPackageSelectorHelp.cc:127 +msgid " <b>Hint:</b> There is a \"zzz All\" entry at the very end of the list that will show all packages. This may take a few seconds on slow machines." +msgstr " <b>힌트:</b> 모든 패키지를 표시하는 목록 맨 끝에는 \"zzz All\" 항목이 표시됩니다. 속도가 느린 시스템에서는 몇 초가 걸릴 수 있습니다." -#: src/YQPackageSelectorHelp.cc:130 -msgid "" -"<b>Search</b> allows you to search for packages that meet various criteria. " -"This is usually the easiest way to find a package if you know its name." -msgstr "" -"<b>검색</b>을 사용하여 다양한 기준을 충족시키는 패키지를 검색할 수 있습니다. " -"일반적으로 패키지를 찾는 가장 쉬운 방법은 패키지의 이름을 알고 있는 경우입니" -"다." +#: src/YQPackageSelectorHelp.cc:130 +msgid "<b>Search</b> allows you to search for packages that meet various criteria. This is usually the easiest way to find a package if you know its name." +msgstr "<b>검색</b>을 사용하여 다양한 기준을 충족시키는 패키지를 검색할 수 있습니다. 일반적으로 패키지를 찾는 가장 쉬운 방법은 패키지의 이름을 알고 있는 경우입니다." -#: src/YQPackageSelectorHelp.cc:132 -msgid "" -"<b>Hint:</b> You can also use this to find out what package contains a " -"certain library. Search in the <b>Provides</b> RPM field." -msgstr "" -"<b>힌트:</b> 또한 이 기능을 사용하여 특정 라이브러리를 포함하는 패키지를 알아" -"볼 수 있습니다. <b>제공</b> RPM 필드에서 검색하십시오." +#: src/YQPackageSelectorHelp.cc:132 +msgid "<b>Hint:</b> You can also use this to find out what package contains a certain library. Search in the <b>Provides</b> RPM field." +msgstr "<b>힌트:</b> 또한 이 기능을 사용하여 특정 라이브러리를 포함하는 패키지를 알아볼 수 있습니다. <b>제공</b> RPM 필드에서 검색하십시오." -#: src/YQPackageSelectorHelp.cc:135 -msgid "" -"<b>Installation Summary</b> by default shows the changes to your system -- " -"what packages will be installed, deleted, or updated." -msgstr "" -"<b>설치 요약</b>은 기본적으로 사용자 시스템의 변경사항을 표시합니다(설치, 삭" -"제 또는 업데이트될 패키지)." +#: src/YQPackageSelectorHelp.cc:135 +msgid "<b>Installation Summary</b> by default shows the changes to your system -- what packages will be installed, deleted, or updated." +msgstr "<b>설치 요약</b>은 기본적으로 사용자 시스템의 변경사항을 표시합니다(설치, 삭제 또는 업데이트될 패키지)." -#: src/YQPackageSelectorHelp.cc:137 -msgid "" -"It is generally a good idea to use <b>Check Dependencies</b> then switch to " -"<b>Installation Summary</b> before clicking <b>Accept</b>. This way you can " -"see all changes that will be made to your system." -msgstr "" -"일반적으로 <b>종속성 확인</b>을 사용한 다음 <b>승인</b>을 클릭하기 전에 <b>설" -"치 요약</b>으로 전환하는 것이 좋습니다. 그러면 시스템에 작성될 모든 변경사항" -"을 볼 수 있습니다." +#: src/YQPackageSelectorHelp.cc:137 +msgid "It is generally a good idea to use <b>Check Dependencies</b> then switch to <b>Installation Summary</b> before clicking <b>Accept</b>. This way you can see all changes that will be made to your system." +msgstr "일반적으로 <b>종속성 확인</b>을 사용한 다음 <b>승인</b>을 클릭하기 전에 <b>설치 요약</b>으로 전환하는 것이 좋습니다. 그러면 시스템에 작성될 모든 변경사항을 볼 수 있습니다." -#: src/YQPackageSelectorHelp.cc:140 -msgid "" -"You can also explicitly select what packages with what status to see here; " -"use the check boxes at the left side." -msgstr "" -"또한 여기서 확인할 패키지와 함께 상태를 명시적으로 선택할 수 있습니다. 왼쪽" -"의 체크박스를 사용하십시오." +#: src/YQPackageSelectorHelp.cc:140 +msgid "You can also explicitly select what packages with what status to see here; use the check boxes at the left side." +msgstr "또한 여기서 확인할 패키지와 함께 상태를 명시적으로 선택할 수 있습니다. 왼쪽의 체크박스를 사용하십시오." -#: src/YQPackageSelectorHelp.cc:142 -msgid "" -"<b>Hint:</b> You can also reverse the effect of this filter. You can see " -"what packages remain the same on your system. Simply check <b>Keep</b> and " -"uncheck everything else." -msgstr "" -"<b>힌트:</b> 이 필터의 효과를 되돌릴 수도 있습니다. 시스템에서 패키지가 동일" -"하게 유지되도록 하는 요소를 확인할 수 있습니다. <b>유지</b>를 선택하고 나머지" -"를 모두 선택 취소하면 됩니다." +#: src/YQPackageSelectorHelp.cc:142 +msgid "<b>Hint:</b> You can also reverse the effect of this filter. You can see what packages remain the same on your system. Simply check <b>Keep</b> and uncheck everything else." +msgstr "<b>힌트:</b> 이 필터의 효과를 되돌릴 수도 있습니다. 시스템에서 패키지가 동일하게 유지되도록 하는 요소를 확인할 수 있습니다. <b>유지</b>를 선택하고 나머지를 모두 선택 취소하면 됩니다." -#. Make sure all images used here are specified in -#. helpimages_DATA in include/Makefile.am ! -#. Translators: Headline for help about package status icons -#: src/YQPackageSelectorHelp.cc:159 +#. Make sure all images used here are specified in +#. helpimages_DATA in include/Makefile.am ! +#. Translators: Headline for help about package status icons +#: src/YQPackageSelectorHelp.cc:159 msgid "Symbols Overview" msgstr "기호 개요" -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:166 src/YQPkgStatusFilterView.cc:108 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:166 src/YQPkgStatusFilterView.cc:108 msgid "Do not install" msgstr "설치 안 함" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:168 +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:168 msgid "This package is not installed and it will not be installed." msgstr "이 패키지는 설치되어 있지 않고 설치되지 않습니다." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:172 src/YQPkgObjList.cc:278 -#: src/YQPkgStatusFilterView.cc:95 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:172 src/YQPkgObjList.cc:278 +#: src/YQPkgStatusFilterView.cc:95 msgid "Install" msgstr "설치" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:174 +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:174 msgid "This package will be installed. It is not installed yet." msgstr "이 패키지는 설치되지만, 아직은 설치되지 않았습니다." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:178 src/YQPkgObjList.cc:279 -#: src/YQPkgStatusFilterView.cc:107 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:178 src/YQPkgObjList.cc:279 +#: src/YQPkgStatusFilterView.cc:107 msgid "Keep" msgstr "유지" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:180 +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:180 msgid "This package is already installed. Leave it untouched." msgstr "이 패키지는 이미 설치되어 있고, 변경 없이 보존합니다." -#. Translators: Package status short (!) description -#. Translators: Keyboard action short (!) description -#: src/YQPackageSelectorHelp.cc:184 src/YQPackageSelectorHelp.cc:293 -#: src/YQPkgObjList.cc:283 src/YQPkgStatusFilterView.cc:96 +#. Translators: Package status short (!) description +#. Translators: Keyboard action short (!) description +#: src/YQPackageSelectorHelp.cc:184 src/YQPackageSelectorHelp.cc:293 +#: src/YQPkgObjList.cc:283 src/YQPkgStatusFilterView.cc:96 msgid "Update" msgstr "업데이트" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:186 -msgid "" -"This package is already installed. Update it or reinstall it (if the " -"versions are the same)." -msgstr "" -"이 패키지는 이미 설치되어 있습니다. 업데이트하거나 다시 설치하십시오(버전이 " -"동일한 경우)." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:186 +msgid "This package is already installed. Update it or reinstall it (if the versions are the same)." +msgstr "이 패키지는 이미 설치되어 있습니다. 업데이트하거나 다시 설치하십시오(버전이 동일한 경우)." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:191 src/YQPkgObjList.cc:277 -#: src/YQPkgStatusFilterView.cc:94 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:191 src/YQPkgObjList.cc:277 +#: src/YQPkgStatusFilterView.cc:94 msgid "Delete" msgstr "삭제" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:193 +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:193 msgid "This package is already installed. Delete it." msgstr "이 패키지는 이미 설치되어 있습니다. 삭제하십시오." -#. Translators: Package status short (!) description -#. Translators: Keyboard action short (!) description -#: src/YQPackageSelectorHelp.cc:197 src/YQPackageSelectorHelp.cc:310 -#: src/YQPkgStatusFilterView.cc:100 +#. Translators: Package status short (!) description +#. Translators: Keyboard action short (!) description +#: src/YQPackageSelectorHelp.cc:197 src/YQPackageSelectorHelp.cc:310 +#: src/YQPkgStatusFilterView.cc:100 msgid "Taboo" msgstr "타부" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:199 -msgid "" -"This package is not installed and should not be installed under any " -"circumstances, especially not because of unresolved dependencies that other " -"packages might have or get." -msgstr "" -"이 패키지는 설치되어 있지 않고 어떤 상황에서도 설치할 수 없습니다. 특히, 다" -"른 패키지에 있을 수 있는 해결되지 않은 종속성 문제 때문은 아닙니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:199 +msgid "This package is not installed and should not be installed under any circumstances, especially not because of unresolved dependencies that other packages might have or get." +msgstr "이 패키지는 설치되어 있지 않고 어떤 상황에서도 설치할 수 없습니다. 특히, 다른 패키지에 있을 수 있는 해결되지 않은 종속성 문제 때문은 아닙니다." -#: src/YQPackageSelectorHelp.cc:203 src/YQPackageSelectorHelp.cc:316 -msgid "" -"Packages set to \"taboo\" are treated as if they did not exist on any " -"installation media." +#: src/YQPackageSelectorHelp.cc:203 src/YQPackageSelectorHelp.cc:316 +msgid "Packages set to \"taboo\" are treated as if they did not exist on any installation media." msgstr "\"타부\"로 설정된 패키지는 설치 미디어에 없는 것처럼 취급됩니다." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:207 src/YQPkgStatusFilterView.cc:101 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:207 src/YQPkgStatusFilterView.cc:101 msgid "Protected" msgstr "보호됨" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:209 -msgid "" -"This package is installed and should not be modified, especially not " -"because of unresolved dependencies that other packages might have or get." -msgstr "" -"이 패키지는 설치되었지만 수정할 수 없습니다. 특히, 다른 패키지에 있을 수 있" -"는 해결되지 않은 종속성 문제 때문은 아닙니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:209 +msgid "This package is installed and should not be modified, especially not because of unresolved dependencies that other packages might have or get." +msgstr "이 패키지는 설치되었지만 수정할 수 없습니다. 특히, 다른 패키지에 있을 수 있는 해결되지 않은 종속성 문제 때문은 아닙니다." -#: src/YQPackageSelectorHelp.cc:213 -msgid "" -"Use this status for third-party packages that should not be overwritten by " -"newer versions that may come with the distribution." -msgstr "" -"배포 시 함께 제공될 수 있는 타사 패키지가 최신 버전으로 덮어쓰이지 않아야 할 " -"경우, 이러한 타사 패키지에 이 상태를 사용하십시오." +#: src/YQPackageSelectorHelp.cc:213 +msgid "Use this status for third-party packages that should not be overwritten by newer versions that may come with the distribution." +msgstr "배포 시 함께 제공될 수 있는 타사 패키지가 최신 버전으로 덮어쓰이지 않아야 할 경우, 이러한 타사 패키지에 이 상태를 사용하십시오." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:218 src/YQPkgObjList.cc:275 -#: src/YQPkgStatusFilterView.cc:98 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:218 src/YQPkgObjList.cc:275 +#: src/YQPkgStatusFilterView.cc:98 msgid "Autoinstall" msgstr "자동 설치" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:220 -msgid "" -"This package will be installed automatically because some other package " -"needs it." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:220 +msgid "This package will be installed automatically because some other package needs it." msgstr "이 패키지는 일부 다른 패키지에 필요하므로 자동으로 설치됩니다." -#: src/YQPackageSelectorHelp.cc:222 -msgid "" -"<b>Hint:</b> You may have to use \"taboo\" to get rid of such a package." -msgstr "" -"<b>힌트:</b> 이러한 패키지를 제거하기 위해 \"타부\"를 사용해야 할 수 있습니" -"다." +#: src/YQPackageSelectorHelp.cc:222 +msgid "<b>Hint:</b> You may have to use \"taboo\" to get rid of such a package." +msgstr "<b>힌트:</b> 이러한 패키지를 제거하기 위해 \"타부\"를 사용해야 할 수 있습니다." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:226 src/YQPkgObjList.cc:276 -#: src/YQPkgStatusFilterView.cc:99 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:226 src/YQPkgObjList.cc:276 +#: src/YQPkgStatusFilterView.cc:99 msgid "Autoupdate" msgstr "자동 업데이트" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:228 -msgid "" -"This package is already installed, but some other package needs a newer " -"version, so it will automatically be updated." -msgstr "" -"이 패키지는 이미 설치되었지만, 일부 다른 패키지에서 최신 버전을 필요로 하므" -"로 자동으로 업데이트됩니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:228 +msgid "This package is already installed, but some other package needs a newer version, so it will automatically be updated." +msgstr "이 패키지는 이미 설치되었지만, 일부 다른 패키지에서 최신 버전을 필요로 하므로 자동으로 업데이트됩니다." -#. Translators: Package status short (!) description -#: src/YQPackageSelectorHelp.cc:233 src/YQPkgObjList.cc:274 -#: src/YQPkgStatusFilterView.cc:97 +#. Translators: Package status short (!) description +#: src/YQPackageSelectorHelp.cc:233 src/YQPkgObjList.cc:274 +#: src/YQPkgStatusFilterView.cc:97 msgid "Autodelete" msgstr "자동 삭제" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:235 -msgid "" -"This package is already installed, but package dependencies require that it " -"is deleted." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:235 +msgid "This package is already installed, but package dependencies require that it is deleted." msgstr "이 패키지는 이미 설치되었지만 패키지 종속성을 삭제해야 합니다." -#: src/YQPackageSelectorHelp.cc:236 +#: src/YQPackageSelectorHelp.cc:236 msgid "This can happen, for example, if some other package obsoletes this one." -msgstr "" -"예를 들어, 일부 다른 패키지가 이 패키지를 폐기 처분할 경우 발생할 수 있습니" -"다." +msgstr "예를 들어, 일부 다른 패키지가 이 패키지를 폐기 처분할 경우 발생할 수 있습니다." -#. Translators: Headline for help about "magic keys" in the package manager -#: src/YQPackageSelectorHelp.cc:265 +#. Translators: Headline for help about "magic keys" in the package manager +#: src/YQPackageSelectorHelp.cc:265 msgid "Special Keys Overview" msgstr "특수 키 개요" -#. Translators: Additional hint that will be added to any of the following keyboard actions. -#. Automatic word wrapping. -#: src/YQPackageSelectorHelp.cc:269 +#. Translators: Additional hint that will be added to any of the following keyboard actions. +#. Automatic word wrapping. +#: src/YQPackageSelectorHelp.cc:269 msgid "In any case, go to the next list item." msgstr "어떤 경우든지, 다음 목록 항목으로 이동하십시오." -#. Translators: Keyboard action short (!) description -#: src/YQPackageSelectorHelp.cc:276 +#. Translators: Keyboard action short (!) description +#: src/YQPackageSelectorHelp.cc:276 msgid "Add" msgstr "추가" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:278 -msgid "" -"Get this package. Install it if it is not installed yet. Update it to the " -"latest version if it is installed and there is a newer version." -msgstr "" -"이 패키지를 가져옵니다. 패키지가 아직 설치되지 않았다면 설치하십시오. 패키지" -"가 설치되었고 최신 버전이 있으면 최신 버전으로 업데이트하십시오." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:278 +msgid "Get this package. Install it if it is not installed yet. Update it to the latest version if it is installed and there is a newer version." +msgstr "이 패키지를 가져옵니다. 패키지가 아직 설치되지 않았다면 설치하십시오. 패키지가 설치되었고 최신 버전이 있으면 최신 버전으로 업데이트하십시오." -#. Translators: Keyboard action short (!) description -#: src/YQPackageSelectorHelp.cc:285 +#. Translators: Keyboard action short (!) description +#: src/YQPackageSelectorHelp.cc:285 msgid "Remove" msgstr "제거" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:287 -msgid "" -"Get rid of this package. Mark it as \"do not install\" if it is not " -"installed yet. Delete it if it is installed." -msgstr "" -"이 패키지를 제거합니다. 아직 설치되지 않았다면 \"설치 안 함\"으로 표시하고, " -"설치되었다면 삭제하십시오." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:287 +msgid "Get rid of this package. Mark it as \"do not install\" if it is not installed yet. Delete it if it is installed." +msgstr "이 패키지를 제거합니다. 아직 설치되지 않았다면 \"설치 안 함\"으로 표시하고, 설치되었다면 삭제하십시오." -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:295 -msgid "" -"Update this package if it is installed and there is a newer version. Ignore " -"packages that are not installed." -msgstr "" -"이 패키지가 설치되었고 최신 버전이 있으면 패키지를 업데이트하고, 설치되지 않" -"은 패키지는 무시합니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:295 +msgid "Update this package if it is installed and there is a newer version. Ignore packages that are not installed." +msgstr "이 패키지가 설치되었고 최신 버전이 있으면 패키지를 업데이트하고, 설치되지 않은 패키지는 무시합니다." -#. Translators: Keyboard action short (!) description -#: src/YQPackageSelectorHelp.cc:302 +#. Translators: Keyboard action short (!) description +#: src/YQPackageSelectorHelp.cc:302 msgid "Undo Update" msgstr "업데이트 실행 취소" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:304 -msgid "" -"Undo the effect of \">\" above: Set package to \"keep\" if it is currently " -"set to \"update\". Ignore all other packages." -msgstr "" -"위의 \">\" 효과 실행 취소: 현재 \"업데이트\"로 설정되어 있다면 패키지를 \"유" -"지\"로 설정하고, 다른 모든 패키지를 무시합니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:304 +msgid "Undo the effect of \">\" above: Set package to \"keep\" if it is currently set to \"update\". Ignore all other packages." +msgstr "위의 \">\" 효과 실행 취소: 현재 \"업데이트\"로 설정되어 있다면 패키지를 \"유지\"로 설정하고, 다른 모든 패키지를 무시합니다." -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:312 -msgid "" -"Set this package to \"taboo\" if it is not installed: make sure this package " -"does not get installed, especially not because of unresolved dependencies " -"that other packages might have or get. " -msgstr "" -"이 패키지가 설치되지 않은 경우 이 패키지를 \"타부\"로 설정합니다. 이 패키지" -"가 설치되지 않는 이유는 특히, 다른 패키지에 있을 수 있는 해결되지 않은 종속" -"성 문제 때문은 아닙니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:312 +msgid "Set this package to \"taboo\" if it is not installed: make sure this package does not get installed, especially not because of unresolved dependencies that other packages might have or get. " +msgstr "이 패키지가 설치되지 않은 경우 이 패키지를 \"타부\"로 설정합니다. 이 패키지가 설치되지 않는 이유는 특히, 다른 패키지에 있을 수 있는 해결되지 않은 종속성 문제 때문은 아닙니다." -#. Translators: Keyboard action short (!) description -#: src/YQPackageSelectorHelp.cc:322 +#. Translators: Keyboard action short (!) description +#: src/YQPackageSelectorHelp.cc:322 msgid "Protect" msgstr "보호" -#. Translators: Automatic word-wrapping. -#: src/YQPackageSelectorHelp.cc:324 -msgid "" -"Set this package to \"protected\" if it is installed: make sure this package " -"will not be modified, especially not because of unresolved dependencies that " -"other packages might have or get. " -msgstr "" -"이 패키지가 설치되었으면 \"보호됨\"으로 설정합니다. 이 패키지가 수정되지 않" -"는 이유는 특히, 다른 패키지에 있을 수 있는 해결되지 않은 종속성 문제 때문은 " -"아닙니다." +#. Translators: Automatic word-wrapping. +#: src/YQPackageSelectorHelp.cc:324 +msgid "Set this package to \"protected\" if it is installed: make sure this package will not be modified, especially not because of unresolved dependencies that other packages might have or get. " +msgstr "이 패키지가 설치되었으면 \"보호됨\"으로 설정합니다. 이 패키지가 수정되지 않는 이유는 특히, 다른 패키지에 있을 수 있는 해결되지 않은 종속성 문제 때문은 아닙니다." -#: src/YQPackageSelectorHelp.cc:328 -msgid "" -"Use this for third-party packages that should not be overwritten by newer " -"versions that may come with the distribution." -msgstr "" -"배포 시 함께 제공될 수 있는 타사 패키지가 최신 버전으로 덮어쓰이지 않아야 하" -"는 경우 타사 패키지에 대해 이 설정을 사용하십시오." +#: src/YQPackageSelectorHelp.cc:328 +msgid "Use this for third-party packages that should not be overwritten by newer versions that may come with the distribution." +msgstr "배포 시 함께 제공될 수 있는 타사 패키지가 최신 버전으로 덮어쓰이지 않아야 하는 경우 타사 패키지에 대해 이 설정을 사용하십시오." -#: src/YQPatternSelector.cc:180 src/YQPatternSelector.cc:248 -#: src/YQSimplePatchSelector.cc:182 src/YQSimplePatchSelector.cc:208 +#: src/YQPatternSelector.cc:180 src/YQPatternSelector.cc:248 +#: src/YQSimplePatchSelector.cc:182 src/YQSimplePatchSelector.cc:208 msgid "&Details..." msgstr "자세히(&D)..." -#: src/YQPkgChangeLogView.cc:87 src/YQPkgFileListView.cc:94 +#: src/YQPkgChangeLogView.cc:87 src/YQPkgFileListView.cc:94 msgid "Information only available for installed packages." msgstr "설치된 패키지에 대해서만 사용할 수 있는 정보입니다." -#. Dialog title -#: src/YQPkgChangesDialog.cc:76 +#. Dialog title +#: src/YQPkgChangesDialog.cc:76 msgid "Changed Packages" msgstr "변경된 패키지" -#. add the items. -#: src/YQPkgChangesDialog.cc:114 +#. add the items. +#: src/YQPkgChangesDialog.cc:114 msgid "All" msgstr "모두" -#: src/YQPkgChangesDialog.cc:115 +#: src/YQPkgChangesDialog.cc:115 msgid "Selected by the user" msgstr "사용자가 선택함" -#. Set the dialog title. -#. -#. "Dependency conflict" is already used as the conflict list header just -#. some pixels below that, so don't use this twice. This dialog title may -#. or may not be visible, depending on whether or not there is a window -#. manager running (and configured to show any dialog titles). -#: src/YQPkgConflictDialog.cc:98 +#. Set the dialog title. +#. +#. "Dependency conflict" is already used as the conflict list header just +#. some pixels below that, so don't use this twice. This dialog title may +#. or may not be visible, depending on whether or not there is a window +#. manager running (and configured to show any dialog titles). +#: src/YQPkgConflictDialog.cc:98 msgid "Warning" msgstr "경고" -#. "OK" button -#: src/YQPkgConflictDialog.cc:134 +#. "OK" button +#: src/YQPkgConflictDialog.cc:134 msgid "&OK -- Try Again" msgstr "확인 - 다시 시도(&O)" -#. "Expert" menu button -#: src/YQPkgConflictDialog.cc:145 +#. "Expert" menu button +#: src/YQPkgConflictDialog.cc:145 msgid "&Expert" msgstr "고급(&E)" -#: src/YQPkgConflictDialog.cc:157 +#: src/YQPkgConflictDialog.cc:157 msgid "&Save This List to a File..." msgstr "목록을 파일로 저장(&S)..." -#. Busy popup -#: src/YQPkgConflictDialog.cc:174 +#. Busy popup +#: src/YQPkgConflictDialog.cc:174 msgid "Checking Dependencies..." msgstr "종속성 검사 중..." -#. Heading for popup dialog -#: src/YQPkgConflictDialog.cc:388 +#. Heading for popup dialog +#: src/YQPkgConflictDialog.cc:388 msgid "Create Dependency Resolver Test Case" msgstr "종속성 확인자 테스트 사례 생성" -#: src/YQPkgConflictDialog.cc:391 -msgid "" -"<p>Use this to generate extensive logs to help tracking down bugs in the " -"dependency resolver. The logs will be stored in directory <br><tt>%1</tt></p>" -msgstr "" -"<p>종속성 확인자에서 버그 추적에 도움이 되는 확장 로그를 생성합니다. 로그는 " -"<br><tt>%1</tt> 디렉토리에 저장됩니다.</p>" +#: src/YQPkgConflictDialog.cc:391 +msgid "<p>Use this to generate extensive logs to help tracking down bugs in the dependency resolver. The logs will be stored in directory <br><tt>%1</tt></p>" +msgstr "<p>종속성 확인자에서 버그 추적에 도움이 되는 확장 로그를 생성합니다. 로그는 <br><tt>%1</tt> 디렉토리에 저장됩니다.</p>" -#. parent -#: src/YQPkgConflictDialog.cc:395 +#. parent +#: src/YQPkgConflictDialog.cc:395 msgid "Solver Test Case" msgstr "Solver 테스트 사례" -#: src/YQPkgConflictDialog.cc:410 -msgid "" -"<p>Dependency resolver test case written to <br><tt>%1</tt></p><p>Prepare " -"<tt>y2logs.tgz tar</tt> archive to attach to Bugzilla?</p>" -msgstr "" -"<p><br><tt>%1</tt>에 기록된 종속성 확인자 테스트 사례</p><p>Bugzilla에 첨부" -"할 <tt>y2logs.tgz tar</tt> 보관 파일을 준비하시겠습니까?</p>" +#: src/YQPkgConflictDialog.cc:410 +msgid "<p>Dependency resolver test case written to <br><tt>%1</tt></p><p>Prepare <tt>y2logs.tgz tar</tt> archive to attach to Bugzilla?</p>" +msgstr "<p><br><tt>%1</tt>에 기록된 종속성 확인자 테스트 사례</p><p>Bugzilla에 첨부할 <tt>y2logs.tgz tar</tt> 보관 파일을 준비하시겠습니까?</p>" -#. parent -#: src/YQPkgConflictDialog.cc:413 +#. parent +#: src/YQPkgConflictDialog.cc:413 msgid "Success" msgstr "성공" -#. caption -#: src/YQPkgConflictDialog.cc:426 -msgid "" -"<p><b>Error</b> creating dependency resolver test case</p><p>Please check " -"disk space and permissions for <tt>%1</tt></p>" -msgstr "" -"<p>종속성 확인자 테스트 사례 생성 중 <b>오류 발생</b></p><p><tt>%1</tt>용 디" -"스크 공간과 권한을 검사하십시오.</p>" +#. caption +#: src/YQPkgConflictDialog.cc:426 +msgid "<p><b>Error</b> creating dependency resolver test case</p><p>Please check disk space and permissions for <tt>%1</tt></p>" +msgstr "<p>종속성 확인자 테스트 사례 생성 중 <b>오류 발생</b></p><p><tt>%1</tt>용 디스크 공간과 권한을 검사하십시오.</p>" -#. startsWith -#. filter -#: src/YQPkgConflictList.cc:180 +#. startsWith +#. filter +#: src/YQPkgConflictList.cc:180 msgid "Save Conflicts List" msgstr "충돌 목록 저장" -#. caption -#: src/YQPkgConflictList.cc:202 src/YQPkgList.cc:606 +#. caption +#: src/YQPkgConflictList.cc:202 src/YQPkgList.cc:606 msgid "Cannot open file %1" msgstr "%1 파일을 열 수 없습니다." -#: src/YQPkgConflictList.cc:292 +#: src/YQPkgConflictList.cc:292 msgid "Conflict Resolution:" msgstr "충돌 해결:" -#: src/YQPkgConflictList.cc:329 +#: src/YQPkgConflictList.cc:329 msgid "<a href='/'>%1 more...</a>" msgstr "<a href='/'>%1 추가...</a>" -#: src/YQPkgDependenciesView.cc:104 src/YQPkgDependenciesView.cc:134 -#: src/YQPkgTechnicalDetailsView.cc:154 src/YQPkgTechnicalDetailsView.cc:196 +#: src/YQPkgDependenciesView.cc:104 src/YQPkgDependenciesView.cc:134 +#: src/YQPkgTechnicalDetailsView.cc:154 src/YQPkgTechnicalDetailsView.cc:196 msgid "Version:" msgstr "버전:" -#: src/YQPkgDependenciesView.cc:106 src/YQPkgDependenciesView.cc:136 +#: src/YQPkgDependenciesView.cc:106 src/YQPkgDependenciesView.cc:136 msgid "Provides:" msgstr "제공:" -#: src/YQPkgDependenciesView.cc:107 src/YQPkgDependenciesView.cc:137 +#: src/YQPkgDependenciesView.cc:107 src/YQPkgDependenciesView.cc:137 msgid "Prerequires:" msgstr "전제조건:" -#: src/YQPkgDependenciesView.cc:108 src/YQPkgDependenciesView.cc:138 +#: src/YQPkgDependenciesView.cc:108 src/YQPkgDependenciesView.cc:138 msgid "Requires:" msgstr "필요:" -#: src/YQPkgDependenciesView.cc:109 src/YQPkgDependenciesView.cc:139 +#: src/YQPkgDependenciesView.cc:109 src/YQPkgDependenciesView.cc:139 msgid "Conflicts:" msgstr "충돌:" -#: src/YQPkgDependenciesView.cc:110 src/YQPkgDependenciesView.cc:140 +#: src/YQPkgDependenciesView.cc:110 src/YQPkgDependenciesView.cc:140 msgid "Obsoletes:" msgstr "폐기사항:" -#: src/YQPkgDependenciesView.cc:111 src/YQPkgDependenciesView.cc:141 +#: src/YQPkgDependenciesView.cc:111 src/YQPkgDependenciesView.cc:141 msgid "Recommends:" msgstr "권장사항:" -#: src/YQPkgDependenciesView.cc:112 src/YQPkgDependenciesView.cc:142 +#: src/YQPkgDependenciesView.cc:112 src/YQPkgDependenciesView.cc:142 msgid "Suggests:" msgstr "제안:" -#: src/YQPkgDependenciesView.cc:113 src/YQPkgDependenciesView.cc:143 +#: src/YQPkgDependenciesView.cc:113 src/YQPkgDependenciesView.cc:143 msgid "Enhances:" msgstr "향상:" -#: src/YQPkgDependenciesView.cc:114 src/YQPkgDependenciesView.cc:144 +#: src/YQPkgDependenciesView.cc:114 src/YQPkgDependenciesView.cc:144 msgid "Supplements:" msgstr "보충:" -#: src/YQPkgDependenciesView.cc:127 src/YQPkgTechnicalDetailsView.cc:189 +#: src/YQPkgDependenciesView.cc:127 src/YQPkgTechnicalDetailsView.cc:189 msgid "<b>Alternate Version</b>" msgstr "<b>대체 버전</b>" -#: src/YQPkgDependenciesView.cc:128 src/YQPkgTechnicalDetailsView.cc:190 +#: src/YQPkgDependenciesView.cc:128 src/YQPkgTechnicalDetailsView.cc:190 msgid "<b>Installed Version</b>" msgstr "<b>설치된 버전</b>" -#. Dialog title -#: src/YQPkgDescriptionDialog.cc:72 +#. Dialog title +#: src/YQPkgDescriptionDialog.cc:72 msgid "Package Description" msgstr "패키지 설명" -#: src/YQPkgDescriptionView.cc:114 +#: src/YQPkgDescriptionView.cc:114 msgid "References:" msgstr "참조:" -#. Translators: %1 contains the support level like "Level 3", "unsupported" or "unknown" -#: src/YQPkgDescriptionView.cc:133 +#. Translators: %1 contains the support level like "Level 3", "unsupported" or "unknown" +#: src/YQPkgDescriptionView.cc:133 msgid "Supportability: %1" msgstr "지원 가능: %1" -#: src/YQPkgDescriptionView.cc:262 +#: src/YQPkgDescriptionView.cc:262 msgid "This package contains: " msgstr "이 패키지 내용:" -#: src/YQPkgDiskUsageList.cc:155 +#: src/YQPkgDiskUsageList.cc:155 msgid "<b>Error:</b> Out of disk space!" msgstr "<b>오류:</b> 디스크에 공간이 없습니다!" -#: src/YQPkgDiskUsageList.cc:164 +#: src/YQPkgDiskUsageList.cc:164 msgid "<b>Warning:</b> Disk space is running out!" msgstr "<b>경고:</b> 디스크에 공간이 부족합니다!" -#. Dialog title -#: src/YQPkgDiskUsageWarningDialog.cc:71 +#. Dialog title +#: src/YQPkgDiskUsageWarningDialog.cc:71 msgid "Disk Space Warning" msgstr "디스크 공간 경고" -#. %1 is the total number of files in a file list -#: src/YQPkgFileListView.cc:130 +#. %1 is the total number of files in a file list +#: src/YQPkgFileListView.cc:130 msgid "%1 files total" msgstr "총 %1개 파일" -#. Translators: Button with pop-up menu to open a new page (very much like -#. in a web browser) with another package filter view or to switch to an -#. existing one if it's open already -#: src/YQPkgFilterTab.cc:172 src/YQPkgFilterTab.cc:176 +#. Translators: Button with pop-up menu to open a new page (very much like +#. in a web browser) with another package filter view or to switch to an +#. existing one if it's open already +#: src/YQPkgFilterTab.cc:172 src/YQPkgFilterTab.cc:176 msgid "&View" msgstr "보기(&V)" -#: src/YQPkgFilterTab.cc:530 +#: src/YQPkgFilterTab.cc:530 msgid "Move page &left" msgstr "페이지를 왼쪽으로 이동(&L)" -#: src/YQPkgFilterTab.cc:540 +#: src/YQPkgFilterTab.cc:540 msgid "Move page &right" msgstr "페이지를 오른쪽으로 이동(&R)" -#: src/YQPkgFilterTab.cc:547 +#: src/YQPkgFilterTab.cc:547 msgid "&Close page" msgstr "페이지 닫기(&C)" -#. Dialog title -#: src/YQPkgHistoryDialog.cc:83 +#. Dialog title +#: src/YQPkgHistoryDialog.cc:83 msgid "Package History" msgstr "패키지 기록" -#: src/YQPkgHistoryDialog.cc:98 +#: src/YQPkgHistoryDialog.cc:98 msgid "Show History (/var/log/zypp/history)" msgstr "기록 표시(/var/log/zypp/history)" -#: src/YQPkgHistoryDialog.cc:110 +#: src/YQPkgHistoryDialog.cc:110 msgid "Date" msgstr "날짜" -#: src/YQPkgHistoryDialog.cc:114 +#: src/YQPkgHistoryDialog.cc:114 msgid "Action" msgstr "동작" -#: src/YQPkgHistoryDialog.cc:114 +#: src/YQPkgHistoryDialog.cc:114 msgid "Version/URL" msgstr "버전/URL" -#. "OK" button -#: src/YQPkgHistoryDialog.cc:131 +#. "OK" button +#: src/YQPkgHistoryDialog.cc:131 msgid "&Close" msgstr "닫기(&C)" -#. Translators: This is a (short) text indicating that something went -#. wrong while trying to read history file. -#: src/YQPkgHistoryDialog.cc:268 +#. Translators: This is a (short) text indicating that something went +#. wrong while trying to read history file. +#: src/YQPkgHistoryDialog.cc:268 msgid "Unable to read history" msgstr "기록을 읽을 수 없음" -#. Translators: Table column heading for language ISO code like "de_DE", "en_US" -#. Please keep this short to avoid stretching the column too wide! -#: src/YQPkgLangList.cc:70 +#. Translators: Table column heading for language ISO code like "de_DE", "en_US" +#. Please keep this short to avoid stretching the column too wide! +#: src/YQPkgLangList.cc:70 msgid "Code" msgstr "코드" -#. Full (human readable) language / country name like "German (Austria)" -#: src/YQPkgLangList.cc:73 +#. Full (human readable) language / country name like "German (Austria)" +#: src/YQPkgLangList.cc:73 msgid "Language" msgstr "언어" -#: src/YQPkgList.cc:84 src/YQPkgList.cc:626 +#: src/YQPkgList.cc:84 src/YQPkgList.cc:626 msgid "Package" msgstr "패키지" -#. headers << _( "Patch" ); _nameCol = numCol++; -#: src/YQPkgList.cc:85 src/YQPkgList.cc:627 src/YQPkgPatchList.cc:114 -#: src/YQPkgProductList.cc:66 +#. headers << _( "Patch" ); _nameCol = numCol++; +#: src/YQPkgList.cc:85 src/YQPkgList.cc:627 src/YQPkgPatchList.cc:114 +#: src/YQPkgProductList.cc:66 msgid "Summary" msgstr "요약" -#: src/YQPkgList.cc:90 src/YQPkgList.cc:628 +#: src/YQPkgList.cc:90 src/YQPkgList.cc:628 msgid "Installed (Available)" msgstr "설치됨(사용 가능)" -#: src/YQPkgList.cc:94 +#: src/YQPkgList.cc:94 msgid "Avail. Ver." msgstr "사용 가능한 버전" -#: src/YQPkgList.cc:97 +#: src/YQPkgList.cc:97 msgid "Inst. Ver." msgstr "설치된 버전" -#: src/YQPkgList.cc:103 src/YQPkgProductList.cc:67 +#: src/YQPkgList.cc:103 src/YQPkgProductList.cc:67 msgid "Version" msgstr "버전" -#. headers << _( "Source" ); _srpmStatusCol = numCol++; -#: src/YQPkgList.cc:108 src/YQPkgList.cc:629 +#. headers << _( "Source" ); _srpmStatusCol = numCol++; +#: src/YQPkgList.cc:108 src/YQPkgList.cc:629 msgid "Size" msgstr "크기" -#: src/YQPkgList.cc:247 src/YQPkgList.cc:517 src/YQPkgObjList.cc:579 -#: src/YQPkgPatchList.cc:436 +#: src/YQPkgList.cc:247 src/YQPkgList.cc:517 src/YQPkgObjList.cc:579 +#: src/YQPkgPatchList.cc:436 msgid "&All in This List" msgstr "이 목록의 모든 항목(&A)" -#: src/YQPkgList.cc:474 src/YQPkgList.cc:495 +#: src/YQPkgList.cc:474 src/YQPkgList.cc:495 msgid "Export This List to &Text File..." msgstr "이 목록을 텍스트 파일로 엑스포트(&T)..." -#: src/YQPkgList.cc:526 +#: src/YQPkgList.cc:526 msgid "&Install Source" msgstr "원본 설치(&I)" -#: src/YQPkgList.cc:530 +#: src/YQPkgList.cc:530 msgid "Do &Not Install Source" msgstr "원본 설치 안 함(&N)" -#: src/YQPkgList.cc:534 +#: src/YQPkgList.cc:534 msgid "&Install All Available Sources" msgstr "사용 가능한 모든 원본 설치(&I)" -#. key -#. enabled -#: src/YQPkgList.cc:540 +#. key +#. enabled +#: src/YQPkgList.cc:540 msgid "Do &Not Install Any Sources" msgstr "모든 원본 설치 안 함(&N)" -#. startsWith -#. filter -#: src/YQPkgList.cc:582 +#. startsWith +#. filter +#: src/YQPkgList.cc:582 msgid "Export Package List" msgstr "패키지 목록 엑스포트" -#: src/YQPkgList.cc:625 +#: src/YQPkgList.cc:625 #, c-format msgid "Status" msgstr "상태" -#: src/YQPkgList.cc:887 +#: src/YQPkgList.cc:887 msgid "Install Sources" msgstr "원본 설치" -#: src/YQPkgList.cc:888 +#: src/YQPkgList.cc:888 msgid "Do Not Install Sources" msgstr "원본 설치 안 함" -#: src/YQPkgList.cc:892 +#: src/YQPkgList.cc:892 msgid "No Sources Available" msgstr "사용 가능한 원본 없음" -#: src/YQPkgList.cc:907 +#: src/YQPkgList.cc:907 msgid "Installed Version: %1" msgstr "설치된 버전: %1" -#. Translators: This is the relation between two versions of one package -#. if both versions are the same, e.g., both "1.2.3-42", "1.2.3-42" -#: src/YQPkgList.cc:925 +#. Translators: This is the relation between two versions of one package +#. if both versions are the same, e.g., both "1.2.3-42", "1.2.3-42" +#: src/YQPkgList.cc:925 msgid "same" msgstr "동일" -#: src/YQPkgList.cc:927 +#: src/YQPkgList.cc:927 msgid "newer" msgstr "최신" -#: src/YQPkgList.cc:928 +#: src/YQPkgList.cc:928 msgid "older" msgstr "이전" -#. Translators: %1 is the version, %2 is one of "newer", "older", "same" -#: src/YQPkgList.cc:931 +#. Translators: %1 is the version, %2 is one of "newer", "older", "same" +#: src/YQPkgList.cc:931 msgid "Available Version: %1 (%2)" msgstr "사용 가능한 버전: %1 (%2)" -#: src/YQPkgList.cc:935 +#: src/YQPkgList.cc:935 msgid "Not available for installation" msgstr "설치에 사용할 수 없습니다." -#: src/YQPkgObjList.cc:280 +#: src/YQPkgObjList.cc:280 msgid "Do Not Install" msgstr "설치 안 함" -#: src/YQPkgObjList.cc:281 +#: src/YQPkgObjList.cc:281 msgid "Protected -- Do Not Modify" msgstr "보호됨 -- 수정 안 함" -#: src/YQPkgObjList.cc:282 +#: src/YQPkgObjList.cc:282 msgid "Taboo -- Never Install" msgstr "타부 - 설치하지 않음" -#: src/YQPkgObjList.cc:422 +#: src/YQPkgObjList.cc:422 msgid "Show solver information" msgstr "해결 프로그램 정보 표시" -#. Translators: Additional hint what caused an auto-status -#: src/YQPkgObjList.cc:1472 +#. Translators: Additional hint what caused an auto-status +#: src/YQPkgObjList.cc:1472 msgid "(by a software selection)" msgstr "(소프트웨어 선택사항 기준)" -#: src/YQPkgObjList.cc:1474 +#: src/YQPkgObjList.cc:1474 msgid "(by dependencies)" msgstr "(종속성 기준)" -#. Translators: tool tip for patches / patterns that are installed, -#. but whose dependencies are broken (no longer satisfied) -#: src/YQPkgObjList.cc:1490 +#. Translators: tool tip for patches / patterns that are installed, +#. but whose dependencies are broken (no longer satisfied) +#: src/YQPkgObjList.cc:1490 msgid "Dependencies broken" msgstr "종속성 손상" -#. Translators: tool tip for patches / patterns that are not installed, -#. but whose dependencies are satisfied -#: src/YQPkgObjList.cc:1500 +#. Translators: tool tip for patches / patterns that are not installed, +#. but whose dependencies are satisfied +#: src/YQPkgObjList.cc:1500 msgid "All dependencies satisfied" msgstr "모든 종속성이 만족됨" -#: src/YQPkgPackageKitGroupsFilterView.cc:62 +#: src/YQPkgPackageKitGroupsFilterView.cc:62 msgid "Accessibility" msgstr "내게 필요한 옵션" -#: src/YQPkgPackageKitGroupsFilterView.cc:63 +#: src/YQPkgPackageKitGroupsFilterView.cc:63 msgid "Accessories" msgstr "액세서리" -#: src/YQPkgPackageKitGroupsFilterView.cc:64 +#: src/YQPkgPackageKitGroupsFilterView.cc:64 msgid "Education" msgstr "교육" -#: src/YQPkgPackageKitGroupsFilterView.cc:65 +#: src/YQPkgPackageKitGroupsFilterView.cc:65 msgid "Games" msgstr "게임" -#: src/YQPkgPackageKitGroupsFilterView.cc:66 +#: src/YQPkgPackageKitGroupsFilterView.cc:66 msgid "Graphics" msgstr "그래픽" -#: src/YQPkgPackageKitGroupsFilterView.cc:67 +#: src/YQPkgPackageKitGroupsFilterView.cc:67 msgid "Internet" msgstr "인터넷" -#: src/YQPkgPackageKitGroupsFilterView.cc:68 +#: src/YQPkgPackageKitGroupsFilterView.cc:68 msgid "Office" msgstr "사무실" -#: src/YQPkgPackageKitGroupsFilterView.cc:69 +#: src/YQPkgPackageKitGroupsFilterView.cc:69 msgid "Other" msgstr "기타" -#: src/YQPkgPackageKitGroupsFilterView.cc:70 +#: src/YQPkgPackageKitGroupsFilterView.cc:70 msgid "Programming" msgstr "프로그래밍" -#: src/YQPkgPackageKitGroupsFilterView.cc:71 +#: src/YQPkgPackageKitGroupsFilterView.cc:71 msgid "Multimedia" msgstr "멀티미디어" -#: src/YQPkgPackageKitGroupsFilterView.cc:72 +#: src/YQPkgPackageKitGroupsFilterView.cc:72 msgid "System" msgstr "시스템" -#: src/YQPkgPackageKitGroupsFilterView.cc:73 +#: src/YQPkgPackageKitGroupsFilterView.cc:73 msgid "GNOME Desktop" msgstr "GNOME 데스크톱" -#: src/YQPkgPackageKitGroupsFilterView.cc:74 +#: src/YQPkgPackageKitGroupsFilterView.cc:74 msgid "KDE Desktop" msgstr "KDE 데스크톱" -#: src/YQPkgPackageKitGroupsFilterView.cc:75 +#: src/YQPkgPackageKitGroupsFilterView.cc:75 msgid "XFCE Desktop" msgstr "XFCE 데스크톱" -#: src/YQPkgPackageKitGroupsFilterView.cc:76 +#: src/YQPkgPackageKitGroupsFilterView.cc:76 msgid "Other Desktops" msgstr "기타 데스크톱" -#: src/YQPkgPackageKitGroupsFilterView.cc:77 +#: src/YQPkgPackageKitGroupsFilterView.cc:77 msgid "Publishing" msgstr "게시" -#: src/YQPkgPackageKitGroupsFilterView.cc:78 +#: src/YQPkgPackageKitGroupsFilterView.cc:78 msgid "Servers" msgstr "서버" -#: src/YQPkgPackageKitGroupsFilterView.cc:79 +#: src/YQPkgPackageKitGroupsFilterView.cc:79 msgid "Fonts" msgstr "글꼴" -#: src/YQPkgPackageKitGroupsFilterView.cc:80 +#: src/YQPkgPackageKitGroupsFilterView.cc:80 msgid "Admin Tools" msgstr "관리 도구" -#: src/YQPkgPackageKitGroupsFilterView.cc:81 +#: src/YQPkgPackageKitGroupsFilterView.cc:81 msgid "Legacy" msgstr "레거시" -#: src/YQPkgPackageKitGroupsFilterView.cc:82 +#: src/YQPkgPackageKitGroupsFilterView.cc:82 msgid "Localization" msgstr "지역화" -#: src/YQPkgPackageKitGroupsFilterView.cc:83 +#: src/YQPkgPackageKitGroupsFilterView.cc:83 msgid "Virtualization" msgstr "가상화" -#: src/YQPkgPackageKitGroupsFilterView.cc:84 +#: src/YQPkgPackageKitGroupsFilterView.cc:84 msgid "Security" msgstr "보안" -#: src/YQPkgPackageKitGroupsFilterView.cc:85 +#: src/YQPkgPackageKitGroupsFilterView.cc:85 msgid "Power Management" msgstr "전원 관리" -#: src/YQPkgPackageKitGroupsFilterView.cc:86 +#: src/YQPkgPackageKitGroupsFilterView.cc:86 msgid "Communication" msgstr "통신" -#: src/YQPkgPackageKitGroupsFilterView.cc:87 +#: src/YQPkgPackageKitGroupsFilterView.cc:87 msgid "Network" msgstr "네트워크" -#: src/YQPkgPackageKitGroupsFilterView.cc:88 +#: src/YQPkgPackageKitGroupsFilterView.cc:88 msgid "Maps" msgstr "맵" -#: src/YQPkgPackageKitGroupsFilterView.cc:89 +#: src/YQPkgPackageKitGroupsFilterView.cc:89 msgid "Software Sources" msgstr "소프트웨어 소스" -#: src/YQPkgPackageKitGroupsFilterView.cc:90 -#: src/YQPkgPackageKitGroupsFilterView.cc:102 +#: src/YQPkgPackageKitGroupsFilterView.cc:90 +#: src/YQPkgPackageKitGroupsFilterView.cc:102 msgid "Unknown Group" msgstr "알 수 없는 그룹" -#: src/YQPkgPackageKitGroupsFilterView.cc:93 +#: src/YQPkgPackageKitGroupsFilterView.cc:93 msgid "Suggested Packages" msgstr "제안된 패키지" -#: src/YQPkgPackageKitGroupsFilterView.cc:94 +#: src/YQPkgPackageKitGroupsFilterView.cc:94 msgid "Recommended Packages" msgstr "권장된 패키지" -#: src/YQPkgPackageKitGroupsFilterView.cc:95 +#: src/YQPkgPackageKitGroupsFilterView.cc:95 msgid "Orphaned Packages" msgstr "독립 패키지" -#: src/YQPkgPackageKitGroupsFilterView.cc:96 +#: src/YQPkgPackageKitGroupsFilterView.cc:96 msgid "Unneeded Packages" msgstr "불필요한 패키지" -#: src/YQPkgPackageKitGroupsFilterView.cc:97 +#: src/YQPkgPackageKitGroupsFilterView.cc:97 msgid "Multiversion Packages" msgstr "다중 버전 패키지" -#: src/YQPkgPackageKitGroupsFilterView.cc:197 src/YQPkgRepoFilterView.cc:165 -#: src/YQPkgRpmGroupTagsFilterView.cc:59 +#: src/YQPkgPackageKitGroupsFilterView.cc:197 src/YQPkgRepoFilterView.cc:165 +#: src/YQPkgRpmGroupTagsFilterView.cc:59 msgid "Package Groups" msgstr "패키지 그룹" -#: src/YQPkgPatchFilterView.cc:92 +#: src/YQPkgPatchFilterView.cc:92 msgid "&Show Patch Category:" msgstr "패치 범주 표시(&S):" -#: src/YQPkgPatchFilterView.cc:99 +#: src/YQPkgPatchFilterView.cc:99 msgid "Needed Patches" msgstr "필요한 패치" -#: src/YQPkgPatchFilterView.cc:100 +#: src/YQPkgPatchFilterView.cc:100 msgid "Unneeded Patches" msgstr "필요 없는 패치" -#: src/YQPkgPatchFilterView.cc:101 +#: src/YQPkgPatchFilterView.cc:101 msgid "All Patches" msgstr "모든 패치" -#: src/YQPkgPatchFilterView.cc:113 +#: src/YQPkgPatchFilterView.cc:113 msgid "Patch Description" msgstr "패치 설명" -#. Translators: These are patch categories -#. Dialog title -#: src/YQPkgPatchList.cc:614 src/YQPkgTextDialog.cc:100 +#. Translators: These are patch categories +#. Dialog title +#: src/YQPkgPatchList.cc:614 src/YQPkgTextDialog.cc:100 msgid "YaST" msgstr "YaST" -#: src/YQPkgPatchList.cc:615 +#: src/YQPkgPatchList.cc:615 msgid "security" msgstr "보안" -#: src/YQPkgPatchList.cc:616 +#: src/YQPkgPatchList.cc:616 msgid "recommended" msgstr "권장" -#: src/YQPkgPatchList.cc:617 +#: src/YQPkgPatchList.cc:617 msgid "optional" msgstr "선택" -#: src/YQPkgPatchList.cc:618 +#: src/YQPkgPatchList.cc:618 msgid "document" msgstr "문서" -#: src/YQPkgPatternList.cc:170 +#: src/YQPkgPatternList.cc:170 msgid "Pattern" msgstr "패턴" -#. Dialog title -#: src/YQPkgProductDialog.cc:73 +#. Dialog title +#: src/YQPkgProductDialog.cc:73 msgid "Products" msgstr "제품" -#: src/YQPkgProductList.cc:65 +#: src/YQPkgProductList.cc:65 msgid "Product" msgstr "제품" -#: src/YQPkgProductList.cc:68 +#: src/YQPkgProductList.cc:68 msgid "Vendor" msgstr "제조업체" -#. Translators: This is a combo box where the user can apply a secondary filter -#. in addition to the primary filter by repository - one of -#. "All packages", "RPM groups", "search", "summary" -#. -#. And yes, the colon really belongs there since this is one of the very -#. few cases where a combo box label is left to the combo box rather than -#. above it. -#: src/YQPkgRepoFilterView.cc:139 +#. Translators: This is a combo box where the user can apply a secondary filter +#. in addition to the primary filter by repository - one of +#. "All packages", "RPM groups", "search", "summary" +#. +#. And yes, the colon really belongs there since this is one of the very +#. few cases where a combo box label is left to the combo box rather than +#. above it. +#: src/YQPkgRepoFilterView.cc:139 msgid "&Secondary Filter:" msgstr "보조 필터(&S):" -#: src/YQPkgRepoFilterView.cc:157 +#: src/YQPkgRepoFilterView.cc:157 msgid "Unmaintained Packages" msgstr "유지관리되지 않는 패키지" -#: src/YQPkgRepoFilterView.cc:177 +#: src/YQPkgRepoFilterView.cc:177 msgid "Search" msgstr "검색" -#: src/YQPkgRepoFilterView.cc:192 +#: src/YQPkgRepoFilterView.cc:192 msgid "Installation Summary" msgstr "설치 요약" -#. Column headers for repository list -#: src/YQPkgRepoList.cc:76 +#. Column headers for repository list +#: src/YQPkgRepoList.cc:76 msgid "Name" msgstr "이름" -#: src/YQPkgRpmGroupTagsFilterView.cc:63 +#: src/YQPkgRpmGroupTagsFilterView.cc:63 msgid "zzz All" msgstr "zzz 모두" -#. Search button -#: src/YQPkgSearchFilterView.cc:93 +#. Search button +#: src/YQPkgSearchFilterView.cc:93 msgid "&Search" msgstr "검색(&S)" -#. -#. Where to search -#. -#: src/YQPkgSearchFilterView.cc:106 +#. +#. Where to search +#. +#: src/YQPkgSearchFilterView.cc:106 msgid "Search in" msgstr "검색 위치" -#: src/YQPkgSearchFilterView.cc:112 +#: src/YQPkgSearchFilterView.cc:112 msgid "Nam&e" msgstr "이름" -#: src/YQPkgSearchFilterView.cc:116 +#: src/YQPkgSearchFilterView.cc:116 msgid "Su&mmary" msgstr "요약(&M)" -#: src/YQPkgSearchFilterView.cc:118 +#: src/YQPkgSearchFilterView.cc:118 msgid "Descr&iption" msgstr "설명(&I)" -#: src/YQPkgSearchFilterView.cc:123 +#: src/YQPkgSearchFilterView.cc:123 msgid "RPM \"P&rovides\"" msgstr "" -#: src/YQPkgSearchFilterView.cc:125 +#: src/YQPkgSearchFilterView.cc:125 msgid "RPM \"Re&quires\"" msgstr "" -#: src/YQPkgSearchFilterView.cc:128 +#: src/YQPkgSearchFilterView.cc:128 msgid "File list" msgstr "파일 목록" -#. -#. Search mode -#. -#: src/YQPkgSearchFilterView.cc:143 +#. +#. Search mode +#. +#: src/YQPkgSearchFilterView.cc:143 msgid "Search &Mode:" msgstr "검색 모드(&M):" -#. Caution: combo box items must be inserted in the same order as enum SearchMode! -#: src/YQPkgSearchFilterView.cc:156 +#. Caution: combo box items must be inserted in the same order as enum SearchMode! +#: src/YQPkgSearchFilterView.cc:156 msgid "Contains" msgstr "포함" -#: src/YQPkgSearchFilterView.cc:157 +#: src/YQPkgSearchFilterView.cc:157 msgid "Begins with" msgstr "시작 문자" -#: src/YQPkgSearchFilterView.cc:158 +#: src/YQPkgSearchFilterView.cc:158 msgid "Exact Match" msgstr "정확히 일치" -#: src/YQPkgSearchFilterView.cc:159 +#: src/YQPkgSearchFilterView.cc:159 msgid "Use Wild Cards" msgstr "와일드카드 사용" -#: src/YQPkgSearchFilterView.cc:160 +#: src/YQPkgSearchFilterView.cc:160 msgid "Use Regular Expression" msgstr "정규식 사용" -#: src/YQPkgSearchFilterView.cc:167 +#: src/YQPkgSearchFilterView.cc:167 msgid "Case Sensiti&ve" msgstr "대소문자 구분(&V)" -#: src/YQPkgSearchFilterView.cc:248 +#: src/YQPkgSearchFilterView.cc:248 msgid "Searching..." msgstr "검색 중..." -#: src/YQPkgSearchFilterView.cc:334 +#: src/YQPkgSearchFilterView.cc:334 msgid "No Results." msgstr "결과가 없습니다." -#. Translators: This is a (short) text indicating that something went -#. wrong while searching for packages. At this point, it is not clear -#. if it's a user error (e.g., syntax error in regular expression) or -#. an internal error. But there is a "Details" button that will return -#. the original (translated) error message. -#: src/YQPkgSearchFilterView.cc:349 +#. Translators: This is a (short) text indicating that something went +#. wrong while searching for packages. At this point, it is not clear +#. if it's a user error (e.g., syntax error in regular expression) or +#. an internal error. But there is a "Details" button that will return +#. the original (translated) error message. +#: src/YQPkgSearchFilterView.cc:349 msgid "Query Error" msgstr "쿼리 오류" -#: src/YQPkgSelList.cc:64 +#: src/YQPkgSelList.cc:64 msgid "Selection" msgstr "선택항목" -#. Headline -#: src/YQPkgStatusFilterView.cc:77 +#. Headline +#: src/YQPkgStatusFilterView.cc:77 msgid "Changes Overview" msgstr "변경사항 개요" -#. -#. Packages with what status to show -#. -#: src/YQPkgStatusFilterView.cc:87 +#. +#. Packages with what status to show +#. +#: src/YQPkgStatusFilterView.cc:87 msgid "Show packages with status" msgstr "패키지를 상태와 함께 표시" -#. Refresh button -#: src/YQPkgStatusFilterView.cc:120 +#. Refresh button +#: src/YQPkgStatusFilterView.cc:120 msgid "&Refresh List" msgstr "목록 새로 고침(&R)" -#: src/YQPkgTechnicalDetailsView.cc:155 src/YQPkgTechnicalDetailsView.cc:197 +#: src/YQPkgTechnicalDetailsView.cc:155 src/YQPkgTechnicalDetailsView.cc:197 msgid "Build Time:" msgstr "빌드 시간:" -#: src/YQPkgTechnicalDetailsView.cc:159 src/YQPkgTechnicalDetailsView.cc:198 +#: src/YQPkgTechnicalDetailsView.cc:159 src/YQPkgTechnicalDetailsView.cc:198 msgid "Install Time:" msgstr "설치 시간:" -#: src/YQPkgTechnicalDetailsView.cc:161 src/YQPkgTechnicalDetailsView.cc:199 +#: src/YQPkgTechnicalDetailsView.cc:161 src/YQPkgTechnicalDetailsView.cc:199 msgid "Package Group:" msgstr "패키지 그룹:" -#: src/YQPkgTechnicalDetailsView.cc:162 src/YQPkgTechnicalDetailsView.cc:200 +#: src/YQPkgTechnicalDetailsView.cc:162 src/YQPkgTechnicalDetailsView.cc:200 msgid "License:" msgstr "사용권:" -#: src/YQPkgTechnicalDetailsView.cc:163 src/YQPkgTechnicalDetailsView.cc:201 +#: src/YQPkgTechnicalDetailsView.cc:163 src/YQPkgTechnicalDetailsView.cc:201 msgid "Installed Size:" msgstr "설치된 크기:" -#: src/YQPkgTechnicalDetailsView.cc:164 src/YQPkgTechnicalDetailsView.cc:202 +#: src/YQPkgTechnicalDetailsView.cc:164 src/YQPkgTechnicalDetailsView.cc:202 msgid "Download Size:" msgstr "다운로드 크기:" -#: src/YQPkgTechnicalDetailsView.cc:165 src/YQPkgTechnicalDetailsView.cc:203 +#: src/YQPkgTechnicalDetailsView.cc:165 src/YQPkgTechnicalDetailsView.cc:203 msgid "Distribution:" msgstr "배포:" -#: src/YQPkgTechnicalDetailsView.cc:166 src/YQPkgTechnicalDetailsView.cc:204 +#: src/YQPkgTechnicalDetailsView.cc:166 src/YQPkgTechnicalDetailsView.cc:204 msgid "Vendor:" msgstr "제조업체:" -#: src/YQPkgTechnicalDetailsView.cc:167 src/YQPkgTechnicalDetailsView.cc:205 +#: src/YQPkgTechnicalDetailsView.cc:167 src/YQPkgTechnicalDetailsView.cc:205 msgid "Packager:" msgstr "패키저:" -#: src/YQPkgTechnicalDetailsView.cc:168 src/YQPkgTechnicalDetailsView.cc:206 +#: src/YQPkgTechnicalDetailsView.cc:168 src/YQPkgTechnicalDetailsView.cc:206 msgid "Architecture:" msgstr "구조:" -#: src/YQPkgTechnicalDetailsView.cc:169 src/YQPkgTechnicalDetailsView.cc:207 +#: src/YQPkgTechnicalDetailsView.cc:169 src/YQPkgTechnicalDetailsView.cc:207 msgid "Build Host:" msgstr "빌드 호스트:" -#: src/YQPkgTechnicalDetailsView.cc:170 src/YQPkgTechnicalDetailsView.cc:208 +#: src/YQPkgTechnicalDetailsView.cc:170 src/YQPkgTechnicalDetailsView.cc:208 msgid "URL:" msgstr "URL:" -#: src/YQPkgTechnicalDetailsView.cc:171 src/YQPkgTechnicalDetailsView.cc:209 +#: src/YQPkgTechnicalDetailsView.cc:171 src/YQPkgTechnicalDetailsView.cc:209 msgid "Source Package:" msgstr "소스 패키지:" -#: src/YQPkgTechnicalDetailsView.cc:172 src/YQPkgTechnicalDetailsView.cc:211 +#: src/YQPkgTechnicalDetailsView.cc:172 src/YQPkgTechnicalDetailsView.cc:211 msgid "Media No.:" msgstr "미디어 번호:" -#: src/YQPkgTechnicalDetailsView.cc:173 src/YQPkgTechnicalDetailsView.cc:212 +#: src/YQPkgTechnicalDetailsView.cc:173 src/YQPkgTechnicalDetailsView.cc:212 msgid "Authors:" msgstr "원저자:" -#: src/YQPkgUpdateProblemFilterView.cc:60 +#: src/YQPkgUpdateProblemFilterView.cc:60 msgid "" "<br>\n" "<h2>Update Problem</h2>\n" @@ -1716,12 +1516,12 @@ "가장 안전한 동작은 삭제하는 것입니다.\n" "</p>" -#: src/YQPkgVersionsView.cc:207 +#: src/YQPkgVersionsView.cc:207 msgid "%1-%2 from vendor %3 (installed)" msgstr "벤더 %3에서 %1-%2(설치됨)" -#. Translators: Popup dialog text. Try to keep the lines about the same length. -#: src/YQPkgVersionsView.cc:382 +#. Translators: Popup dialog text. Try to keep the lines about the same length. +#: src/YQPkgVersionsView.cc:382 msgid "" "You are trying to install multiversion-capable\n" "and non-multiversion-capable versions of this\n" @@ -1731,7 +1531,7 @@ "다중 버전 미지원 버전을\n" "동시에 설치하려고 합니다." -#: src/YQPkgVersionsView.cc:390 +#: src/YQPkgVersionsView.cc:390 msgid "" "This version is multiversion-capable.\n" "\n" @@ -1745,7 +1545,7 @@ "다중 버전 지원 버전 선택을 취소하고 \n" "\"취소\"를 눌러 이 버전 선택을 취소하고 다른 버전을 유지합니다." -#: src/YQPkgVersionsView.cc:399 +#: src/YQPkgVersionsView.cc:399 msgid "" "This version is not multiversion-capable.\n" "\n" @@ -1759,32 +1559,32 @@ "다른 버전 선택을 취소하거나,\n" "\"취소l\"를 눌러 이 버전 선택을 취소하고 다른 버전을 유지하십시오." -#. Dialog heading -#: src/YQPkgVersionsView.cc:407 +#. Dialog heading +#: src/YQPkgVersionsView.cc:407 msgid "Incompatible Package Versions" msgstr "호환되지 않는 패키지 버전" -#. Translators: %1 is a package version, %2 the package architecture, -#. %3 describes the repository where it comes from, -#. %4 is the repository's priority -#. %5 is the vendor of the package -#. Examples: -#. 2.5.23-i568 from Packman with priority 100 and vendor openSUSE -#. 3.17.4-i386 from openSUSE-11.1 update repository with priority 20 and vendor openSUSE -#. ^^^^^^ ^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^ ^^^^^^^^ -#. %1 %2 %3 %4 %5 -#: src/YQPkgVersionsView.cc:533 src/YQPkgVersionsView.cc:570 +#. Translators: %1 is a package version, %2 the package architecture, +#. %3 describes the repository where it comes from, +#. %4 is the repository's priority +#. %5 is the vendor of the package +#. Examples: +#. 2.5.23-i568 from Packman with priority 100 and vendor openSUSE +#. 3.17.4-i386 from openSUSE-11.1 update repository with priority 20 and vendor openSUSE +#. ^^^^^^ ^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^ ^^^^^^^^ +#. %1 %2 %3 %4 %5 +#: src/YQPkgVersionsView.cc:533 src/YQPkgVersionsView.cc:570 msgid "%1-%2 from %3 with priority %4 and vendor %5" msgstr "%3에서 %1-%2(우선순위 %4 및 벤더 %5 포함)" -#: src/YQPkgVersionsView.cc:554 +#: src/YQPkgVersionsView.cc:554 msgid "This version is installed in your system." msgstr "이 버전이 시스템에 설치되어 있습니다." -#: src/YQZyppSolverDialogPluginStub.cc:86 +#: src/YQZyppSolverDialogPluginStub.cc:86 msgid "Missing package" msgstr "누락된 패키지" -#: src/YQZyppSolverDialogPluginStub.cc:87 +#: src/YQZyppSolverDialogPluginStub.cc:87 msgid "Package libqdialogsolver is required for this feature." msgstr "이 기능에 libqdialogsolver 패키지가 필요합니다." Modified: branches/SLE12-SP3/yast/ko/po/qt.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/qt.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/qt.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,53 +14,53 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#: src/QY2DiskUsageList.cc:180 +#: src/QY2DiskUsageList.cc:180 msgid "Name" msgstr "이름" -#. Translators: Please keep this short! -#: src/QY2DiskUsageList.cc:182 +#. Translators: Please keep this short! +#: src/QY2DiskUsageList.cc:182 msgid "Disk Usage" msgstr "디스크 사용량" -#. columnLabels << _("Used"); _usedSizeCol = numCol++; -#: src/QY2DiskUsageList.cc:185 +#. columnLabels << _("Used"); _usedSizeCol = numCol++; +#: src/QY2DiskUsageList.cc:185 msgid "Free" msgstr "사용 가능" -#: src/QY2DiskUsageList.cc:186 +#: src/QY2DiskUsageList.cc:186 msgid "Total" msgstr "총계" -#: src/QY2DiskUsageList.cc:188 +#: src/QY2DiskUsageList.cc:188 msgid "Device" msgstr "장치" -#: src/QY2DiskUsageList.cc:256 +#: src/QY2DiskUsageList.cc:256 msgid "Used %1" msgstr "%1 사용됨" -#. Window title for help wizard window -#: src/QY2HelpDialog.cc:63 src/QY2HelpDialog.cc:112 +#. Window title for help wizard window +#: src/QY2HelpDialog.cc:63 src/QY2HelpDialog.cc:112 msgid "Help" msgstr "도움말" -#. Close button for wizard help window -#: src/QY2HelpDialog.cc:66 src/QY2HelpDialog.cc:113 -#: src/QY2RelNotesDialog.cc:86 src/QY2RelNotesDialog.cc:134 +#. Close button for wizard help window +#: src/QY2HelpDialog.cc:66 src/QY2HelpDialog.cc:113 +#: src/QY2RelNotesDialog.cc:86 src/QY2RelNotesDialog.cc:134 msgid "&Close" msgstr "닫기(&C)" -#. Window title for help wizard window -#: src/QY2RelNotesDialog.cc:83 src/QY2RelNotesDialog.cc:133 +#. Window title for help wizard window +#: src/QY2RelNotesDialog.cc:83 src/QY2RelNotesDialog.cc:133 msgid "Release Notes" msgstr "릴리스 정보" -#: src/QY2StyleEditor.cc:46 +#: src/QY2StyleEditor.cc:46 msgid "Stylesheet Editor" msgstr "스타일시트 편집기" -#: src/YQApplication.cc:643 +#: src/YQApplication.cc:643 msgid "" "You clicked the right mouse button where a left-click was expected.\n" "Switch left and right mouse buttons?" @@ -68,18 +68,18 @@ "왼쪽 마우스 버튼을 클릭해야 하는데 오른쪽 버튼을 클릭했습니다.\n" "마우스의 왼쪽과 오른쪽 버튼 기능을 바꾸시겠습니까?" -#. Popup dialog caption -#: src/YQApplication.cc:656 +#. Popup dialog caption +#: src/YQApplication.cc:656 msgid "Unexpected Click" msgstr "예기치 않은 클릭" -#. parent -#: src/YQDialog.cc:629 +#. parent +#: src/YQDialog.cc:629 msgid "Color switching" msgstr "색상 전환" -#. caption -#: src/YQDialog.cc:630 +#. caption +#: src/YQDialog.cc:630 msgid "" "Switching to color palette for vision impaired users -\n" "press Shift-F4 again to switch back to normal colors." @@ -87,90 +87,62 @@ "시각 장애인을 위한 색상 팔레트로 전환합니다.\n" "일반 색상으로 돌아가려면 Shift-F4를 다시 누르십시오." -#. Translators: This is a very short warning that the CapsLock key -#. is active while trying to type in a password field. This warning -#. replaces the normal label (caption) of that password field while -#. CapsLock is active, so please keep it short. Please don't translate it -#. at all if the term "CapsLock" can reasonably expected to be understood -#. by the target audience. -#. -#. In particular, please don't translate this to death in German. -#. Simply leave it. -#: src/YQInputField.cc:238 +#. Translators: This is a very short warning that the CapsLock key +#. is active while trying to type in a password field. This warning +#. replaces the normal label (caption) of that password field while +#. CapsLock is active, so please keep it short. Please don't translate it +#. at all if the term "CapsLock" can reasonably expected to be understood +#. by the target audience. +#. +#. In particular, please don't translate this to death in German. +#. Simply leave it. +#: src/YQInputField.cc:238 msgid "CapsLock!" msgstr "CapsLock!" -#: src/YQUI_builtins.cc:163 +#: src/YQUI_builtins.cc:163 msgid "Save screen shot to..." msgstr "스크린샷을 다른 이름으로 저장..." -#: src/YQUI_builtins.cc:280 +#: src/YQUI_builtins.cc:280 msgid "YaST Logging" msgstr "YaST 로깅" -#: src/YQUI_builtins.cc:281 +#: src/YQUI_builtins.cc:281 msgid "Configure YaST Logging:" msgstr "YaST 로깅 구성:" -#. Help button -#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) -#. "Help" button -#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) -#: src/YQWizard.cc:862 src/YQWizard.cc:1404 +#. Help button +#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) +#. "Help" button +#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) +#: src/YQWizard.cc:862 src/YQWizard.cc:1404 msgid "&Help" msgstr "도움말(&H)" -#. -#. "Release Notes" button -#. -#. Release Notes button -#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) -#. "Release Notes" button -#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) -#: src/YQWizard.cc:894 src/YQWizard.cc:1419 +#. +#. "Release Notes" button +#. +#. Release Notes button +#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) +#. "Release Notes" button +#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) +#: src/YQWizard.cc:894 src/YQWizard.cc:1419 msgid "&Release Notes" msgstr "릴리스 노트(&R)" -#: src/YQWizard.cc:1116 -msgid "" -"<h1>Advanced Hotkeys</h1><dl><dt>Print Screen</dt><dd>Take and save a " -"screenshot. May not be available when YaST is running under some desktop " -"environments.</dd><dt>Shift-F4</dt><dd>Enable/disable the color palette " -"optimized for vision impaired users.</dd><dt>Shift-F7</dt><dd>Enable/disable " -"logging of debug messages.</dd><dt>Shift-F8</dt><dd>Open a file dialog to " -"save log files to a non-standard location.</dd><dt>Ctrl-Shift-Alt-D<dd>Send a DebugEvent. YaST modules can react on this by executing " -"special debugging actions. Result depends on the specific YaST-module.<dt>Ctrl-Shift-Alt-M</dt><dd>Start/Stop macro recorder.</dd><dt>Ctrl-" -"Shift-Alt-P</dt><dd>Replay macro.</dd><dt>Ctrl-Shift-Alt-S</dt><dd>Show " -"style sheet editor.</dd><dt>Ctrl-Shift-Alt-T</dt><dd>Dump widget tree to the " -"log file.</dd><dt>Ctrl-Alt-Shift-X</dt><dd>Open a terminal window (xterm). " -"Useful for VNC installations.</dd><dt>Ctrl-Shift-Alt-Y</dt><dd>Show widget " -"tree browser.</dd></dl>" -msgstr "" -"<h1>고급 핫키</h1><dl><dt>화면 인쇄</dt><dd>스크린샷을 촬영하고 저장합니다. " -"YaST가 일부 데스크톱 환경에서 실행 중인 경우 사용할 수 없습니다.<dt>Shift-F4</dt><dd>시각 장애 사용자를 위해 최적화된 컬러 팔레트를 활성" -"화/비활성화합니다.</dd><dt>Shift-F7</dt><dd>디버그 메시지 로깅을 활성화/비활" -"성화합니다.</dd><dt>Shift-F8</dt><dd>파일 대화 상자를 열어서 로그 파일을 비표" -"준 위치에 저장합니다.</dd><dt>Ctrl-Shift-Alt-D</dt><dd>DebugEvent를 전송합니" -"다. YaST 모듈은 특수한 디버깅 작업을 실행하여 여기에 대응할 수 있습니다. 결과" -"는 구체적인 YaST 모듈에 따라 달라집니다.</dd><dt>Ctrl-Shift-Alt-M</dt><dd>매" -"크로 레코더를 시작/중단합니다.</dd><dt>Ctrl-Shift-Alt-P</dt><dd>매크로를 다" -"시 재생합니다.</dd><dt>Ctrl-Shift-Alt-S</dt><dd>스타일 시트 편집기를 표시합니" -"다.</dd><dt>Ctrl-Shift-Alt-T</dt><dd>위젯 트리를 로그 파일로 덤프합니다.<dt>Ctrl-Alt-Shift-X</dt><dd>터미널 창을 엽니다(xterm). VNC 설치에 유용합" -"니다.</dd><dt>Ctrl-Shift-Alt-Y</dt><dd>위젯 트리 브라우저를 표시합니다.</dl>" +#: src/YQWizard.cc:1116 +msgid "<h1>Advanced Hotkeys</h1><dl><dt>Print Screen</dt><dd>Take and save a screenshot. May not be available when YaST is running under some desktop environments.</dd><dt>Shift-F4</dt><dd>Enable/disable the color palette optimized for vision impaired users.</dd><dt>Shift-F7</dt><dd>Enable/disable logging of debug messages.</dd><dt>Shift-F8</dt><dd>Open a file dialog to save log files to a non-standard location.</dd><dt>Ctrl-Shift-Alt-D</dt><dd>Send a DebugEvent. YaST modules can react on this by executing special debugging actions. Result depends on the specific YaST-module.</dd><dt>Ctrl-Shift-Alt-M</dt><dd>Start/Stop macro recorder.</dd><dt>Ctrl-Shift-Alt-P</dt><dd>Replay macro.</dd><dt>Ctrl-Shift-Alt-S</dt><dd>Show style sheet editor.</dd><dt>Ctrl-Shift-Alt-T</dt><dd>Dump widget tree to the log file.</dd><dt>Ctrl-Alt-Shift-X</dt><dd>Open a terminal window (xterm). Useful for VNC installations.</dd><dt>Ctrl-Shift-Alt-Y</dt><dd>Show widget tree browser.</dd></dl>" +msgstr "<h1>고급 핫키</h1><dl><dt>화면 인쇄</dt><dd>스크린샷을 촬영하고 저장합니다. YaST가 일부 데스크톱 환경에서 실행 중인 경우 사용할 수 없습니다.</dd><dt>Shift-F4</dt><dd>시각 장애 사용자를 위해 최적화된 컬러 팔레트를 활성화/비활성화합니다.</dd><dt>Shift-F7</dt><dd>디버그 메시지 로깅을 활성화/비활성화합니다.</dd><dt>Shift-F8</dt><dd>파일 대화 상자를 열어서 로그 파일을 비표준 위치에 저장합니다.</dd><dt>Ctrl-Shift-Alt-D</dt><dd>DebugEvent를 전송합니다. YaST 모듈은 특수한 디버깅 작업을 실행하여 여기에 대응할 수 있습니다. 결과는 구체적인 YaST 모듈에 따라 달라집니다.</dd><dt>Ctrl-Shift-Alt-M</dt><dd>매크로 레코더를 시작/중단합니다.</dd><dt>Ctrl-Shift-Alt-P</dt><dd>매크로를 다시 재생합니다.</dd><dt>Ctrl-Shift-Alt-S</dt><dd>스타일 시트 편집기를 표시합니다.</dd><dt>Ctrl-Shift-Alt- T</dt><dd>위젯 트리를 로그 파일로 덤프합니다.</dd><dt>Ctrl-Alt-Shift-X</dt><dd>터미널 창을 엽니다(xterm). VNC 설치에 유용합니다.</dd><dt>Ctrl-Shift-Alt-Y</dt><dd>위젯 트리 브라우저를 표시합니다.</dd></dl>" -#. "Steps" button -#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) -#: src/YQWizard.cc:1409 +#. "Steps" button +#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) +#: src/YQWizard.cc:1409 msgid "&Steps" msgstr "단계(&S)" -#. "Tree" button -#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) -#: src/YQWizard.cc:1414 +#. "Tree" button +#. Qt handles duplicate shortcuts, it can be kept (bnc#880983) +#: src/YQWizard.cc:1414 msgid "&Tree" msgstr "트리(&T)" Modified: branches/SLE12-SP3/yast/ko/po/rdp.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/rdp.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/rdp.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,35 +14,33 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Commandline help title -#: src/clients/rdp.rb:33 +#. Commandline help title +#: src/clients/rdp.rb:33 msgid "Remote Access Configuration" msgstr "원격 액세스 구성" -#. Commandline command help -#: src/clients/rdp.rb:43 +#. Commandline command help +#: src/clients/rdp.rb:43 msgid "Display configuration summary" msgstr "구성 요약 표시" -#. Commandline command help -#: src/clients/rdp.rb:53 +#. Commandline command help +#: src/clients/rdp.rb:53 msgid "Allow remote access" msgstr "원격 액세스 허용" -#. Commandline command help -#: src/clients/rdp.rb:64 +#. Commandline command help +#: src/clients/rdp.rb:64 msgid "Set 'yes' to allow or 'no' to disallow the remote administration" -msgstr "" -"원격 관리를 허용하려면 '예'로 설정하고 허용하지 않으려면 '아니오'로 설정하십" -"시오." +msgstr "원격 관리를 허용하려면 '예'로 설정하고 허용하지 않으려면 '아니오'로 설정하십시오." -#. Command line output Headline -#: src/clients/rdp.rb:107 +#. Command line output Headline +#: src/clients/rdp.rb:107 msgid "Remote Access Configuration Summary:" msgstr "원격 액세스 구성 요약:" -#. Command line error message -#: src/clients/rdp.rb:127 +#. Command line error message +#: src/clients/rdp.rb:127 msgid "" "Please set 'yes' to allow the remote administration\n" "or 'no' to disallow it." @@ -50,94 +48,90 @@ "원격 관리를 허용하려면 '예'로 설정하고 허용하지 않으려면\n" "'아니오'로 설정하십시오." -#. RichText label -#: src/clients/rdp_proposal.rb:57 +#. RichText label +#: src/clients/rdp_proposal.rb:57 msgid "RDP Remote Administration" msgstr "RDP 원격 관리" -#. Menu label -#: src/clients/rdp_proposal.rb:59 +#. Menu label +#: src/clients/rdp_proposal.rb:59 msgid "RDP &Remote Administration" msgstr "RDP 원격 관리(&R)" -#. Dialog contents -#: src/include/rdp/dialogs.rb:30 +#. Dialog contents +#: src/include/rdp/dialogs.rb:30 msgid "Settings" msgstr "설정" -#: src/include/rdp/dialogs.rb:32 +#: src/include/rdp/dialogs.rb:32 msgid "Enable RDP (Remote Desktop Protocol) Service" msgstr "RDP(Remote Desktop Protocol) 서비스 활성화" -#: src/include/rdp/dialogs.rb:33 +#: src/include/rdp/dialogs.rb:33 msgid "Open Port in Firewall" msgstr "방화벽 포트 열기" -#: src/include/rdp/dialogs.rb:40 +#: src/include/rdp/dialogs.rb:40 msgid "" "<p><b><big>Remote Administration via RDP</big></b></p>\n" -"<p>Remote Desktop Protocol (RDP) is a secure remote administration protocol " -"running on TCP port 3389.</p><p>If the feature is enabled, you will be able " -"to login to this computer\n" +"<p>Remote Desktop Protocol (RDP) is a secure remote administration protocol running on TCP port 3389.</p><p>If the feature is enabled, you will be able to login to this computer\n" "remotely via an RDP client such as Windows Remote Desktop Viewer.\n" msgstr "" "<p><b><big>RDP를 통한 원격 관리</big></b></p>\n" -"<p>RDP(Remote Desktop Protocol)는 TCP 포트 3389에서 실행되는 보안 원격 관리 " -"프로토콜입니다.</p><p>이 기능을 활성화한 경우 Windows Remote Desktop Viewer" -"와 같은\n" +"<p>RDP(Remote Desktop Protocol)는 TCP 포트 3389에서 실행되는 보안 원격 관리 프로토콜입니다.</p><p>이 기능을 활성화한 경우 Windows Remote Desktop Viewer와 같은\n" "RDP 클라이언트를 통해 이 컴퓨터에 원격으로 로그인할 수 있습니다.\n" -#: src/include/rdp/dialogs.rb:46 +#: src/include/rdp/dialogs.rb:46 msgid "Remote Administration via RDP" msgstr "RDP를 통한 원격 관리" -#. Progress stage 1 -#: src/modules/RDP.rb:92 +#. Progress stage 1 +#: src/modules/RDP.rb:92 msgid "Write firewall settings" msgstr "방화벽 설정 기록" -#. Progress stage 2 -#: src/modules/RDP.rb:94 +#. Progress stage 2 +#: src/modules/RDP.rb:94 msgid "Configure xrdp" msgstr "xrdp 구성" -#. Progress stage 3 -#: src/modules/RDP.rb:100 +#. Progress stage 3 +#: src/modules/RDP.rb:100 msgid "Restart the services" msgstr "서비스 재시작" -#: src/modules/RDP.rb:102 +#: src/modules/RDP.rb:102 msgid "Stop the services" msgstr "서비스 중지" -#: src/modules/RDP.rb:106 +#: src/modules/RDP.rb:106 msgid "Saving Remote Administration (RDP) Configuration" msgstr "원격 관리(RDP) 구성 저장 중" -#. 100; //for testing -#: src/modules/RDP.rb:111 +#. 100; //for testing +#: src/modules/RDP.rb:111 msgid "Writing firewall settings..." msgstr "방화벽 설정 기록 중..." -#: src/modules/RDP.rb:125 +#: src/modules/RDP.rb:125 msgid "Configuring xrdp..." msgstr "xrdp 구성 중..." -#. Disable xrdp -#: src/modules/RDP.rb:144 +#. Disable xrdp +#: src/modules/RDP.rb:144 msgid "Restarting the service..." msgstr "서비스 재시작 중..." -#: src/modules/RDP.rb:147 +#: src/modules/RDP.rb:147 msgid "Stopping the service..." msgstr "서비스 중지 중..." -#. Label in proposal text -#: src/modules/RDP.rb:163 +#. Label in proposal text +#: src/modules/RDP.rb:163 msgid "RDP (remote desktop protocol) service is enabled." msgstr "RDP(remote desktop protocol) 서비스를 활성화했습니다." -#. Label in proposal text -#: src/modules/RDP.rb:166 +#. Label in proposal text +#: src/modules/RDP.rb:166 msgid "RDP (remote desktop protocol) service is disabled." msgstr "RDP(remote desktop protocol) 서비스를 비활성화했습니다." Modified: branches/SLE12-SP3/yast/ko/po/rear.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/rear.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/rear.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,387 +14,339 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xrear module -#: src/clients/rear.rb:54 +#. Command line help text for the Xrear module +#: src/clients/rear.rb:54 msgid "Configuration of Rear" msgstr "Rear 구성" -#. command line help text for 'configure' action -#: src/clients/rear.rb:67 +#. command line help text for 'configure' action +#: src/clients/rear.rb:67 msgid "Change the Rear configuration" msgstr "Rear 구성 변경" -#: src/clients/rear.rb:73 +#: src/clients/rear.rb:73 msgid "Output" msgstr "출력" -#: src/clients/rear.rb:74 +#: src/clients/rear.rb:74 msgid "Netfs URL" msgstr "Netfs URL" -#. Dialog shown, when system is not supported by rear -#: src/include/rear/ui.rb:137 +#. Dialog shown, when system is not supported by rear +#: src/include/rear/ui.rb:137 msgid "This system is not supported by rear, because:" msgstr "이 시스템은 Rear에서 지원되지 않습니다. 원인:" -#: src/include/rear/ui.rb:142 -msgid "" -"Do NOT expect the created backup to be useful for system recovery if you " -"ignore this warning." -msgstr "" -"이 경고를 무시하는 경우 생성된 백업을 시스템 복구에 사용하지 못할 수 있습니" -"다." +#: src/include/rear/ui.rb:142 +msgid "Do NOT expect the created backup to be useful for system recovery if you ignore this warning." +msgstr "이 경고를 무시하는 경우 생성된 백업을 시스템 복구에 사용하지 못할 수 있습니다." -#: src/include/rear/ui.rb:156 +#: src/include/rear/ui.rb:156 msgid "This system is not supported." msgstr "이 시스템은 지원되지 않습니다." -#: src/include/rear/ui.rb:160 +#: src/include/rear/ui.rb:160 msgid "&Ignore and continue" msgstr "무시하고 계속 진행(&I)" -#: src/include/rear/ui.rb:161 src/include/rear/ui.rb:205 -#: src/include/rear/ui.rb:306 +#: src/include/rear/ui.rb:161 src/include/rear/ui.rb:205 +#: src/include/rear/ui.rb:306 msgid "&Cancel" msgstr "취소(&C)" -#. store original value of directories for the case that the users clicks cancel -#: src/include/rear/ui.rb:195 +#. store original value of directories for the case that the users clicks cancel +#: src/include/rear/ui.rb:195 msgid "Additional Directories to Backup" msgstr "백업에 대한 추가 디렉터리" -#: src/include/rear/ui.rb:204 src/include/rear/ui.rb:305 +#: src/include/rear/ui.rb:204 src/include/rear/ui.rb:305 msgid "&OK" msgstr "확인(&O)" -#: src/include/rear/ui.rb:223 +#: src/include/rear/ui.rb:223 msgid "Choose Directory" msgstr "디렉터리 선택" -#: src/include/rear/ui.rb:253 +#: src/include/rear/ui.rb:253 msgid "Cannot write rear configuration file." msgstr "Rear 구성 파일을 쓸 수 없습니다." -#. store original value of modules for the case that the users clicks cancel -#: src/include/rear/ui.rb:274 +#. store original value of modules for the case that the users clicks cancel +#: src/include/rear/ui.rb:274 msgid "Additional Kernel Modules" msgstr "추가 커널 모듈" -#: src/include/rear/ui.rb:281 +#: src/include/rear/ui.rb:281 msgid "Available Modules in current System:" msgstr "현재 시스템에서 사용 가능한 모듈:" -#: src/include/rear/ui.rb:298 +#: src/include/rear/ui.rb:298 msgid "Modules added to Rescue System:" msgstr "복구 시스템에 추가된 모듈:" -#: src/include/rear/ui.rb:303 +#: src/include/rear/ui.rb:303 msgid "Modules are sorted in the order they were loaded." msgstr "모듈은 로드된 순서로 정렬됩니다." -#. Dialog to run rear -#: src/include/rear/ui.rb:380 +#. Dialog to run rear +#: src/include/rear/ui.rb:380 msgid "Preparing for Rear Execution." msgstr "Rear 실행 준비 중." -#. -v : verbose; without it rear runs completely silent -#: src/include/rear/ui.rb:401 +#. -v : verbose; without it rear runs completely silent +#: src/include/rear/ui.rb:401 msgid "Running rear..." msgstr "Rear 실행 중..." -#: src/include/rear/ui.rb:425 +#: src/include/rear/ui.rb:425 msgid "Execution failed with return value %1." msgstr "실행에 실패했습니다(반환 값: %1)." -#: src/include/rear/ui.rb:434 +#: src/include/rear/ui.rb:434 msgid "Finished. You are strongly advised to test the created backup." msgstr "완료했습니다. 생성된 백업을 테스트해볼 것을 적극 권장합니다." -#. For translators: Caption of the dialog -#. The whole sequence -#: src/include/rear/ui.rb:465 src/include/rear/ui.rb:810 +#. For translators: Caption of the dialog +#. The whole sequence +#: src/include/rear/ui.rb:465 src/include/rear/ui.rb:810 msgid "Rear Configuration" msgstr "Rear 구성" -#. help text for Rear -#: src/include/rear/ui.rb:468 -msgid "" -"<p>Configure Rear Relax and Recover (<b>ReaR</b>) backup for your computer." -msgstr "" -"<p>컴퓨터에 대해 Rear 해제 및 복구(<b>ReaR</b>) 백업을 구성하십시오.</p>" +#. help text for Rear +#: src/include/rear/ui.rb:468 +msgid "<p>Configure Rear Relax and Recover (<b>ReaR</b>) backup for your computer.</p>" +msgstr "<p>컴퓨터에 대해 Rear 해제 및 복구(<b>ReaR</b>) 백업을 구성하십시오.</p>" -#: src/include/rear/ui.rb:471 -msgid "" -"<p>Decide how to start your <b>Recovery System</b>. Choose USB if you want " -"to boot from an USB stick, or ISO for CD-ROM respectively.</p>" -msgstr "" -"<p><b>복구 시스템</b> 시작 방법을 결정하십시오. USB 스틱에서 부팅하려는 경우" -"에는 USB, CD-ROM의 경우에는 ISO를 각각 선택하십시오.</p>" +#: src/include/rear/ui.rb:471 +msgid "<p>Decide how to start your <b>Recovery System</b>. Choose USB if you want to boot from an USB stick, or ISO for CD-ROM respectively.</p>" +msgstr "<p><b>복구 시스템</b> 시작 방법을 결정하십시오. USB 스틱에서 부팅하려는 경우에는 USB, CD-ROM의 경우에는 ISO를 각각 선택하십시오.</p>" -#: src/include/rear/ui.rb:474 -msgid "" -"<p>Choose where the <b>Backup</b> should be stored. Select NFS if you have " -"to use a server that offers Network File System. Please specify the location " -"as follows: <tt>nfs://hostname/directory</tt>. You can also choose USB to " -"store your backup on an USB stick or USB disk.</p>" -msgstr "" -"<p><b>백업</b>을 저장할 장소를 선택하십시오. 네트워크 파일 시스템을 제공하는 " -"서버를 사용해야 하는 경우 NFS를 선택하십시오. <tt>nfs://hostname/directory와 같이 위치를 지정하십시오. USB 스틱 또는 USB 디스크에 백업을 저장하려면 " -"USB를 선택할 수도 있습니다.</p>" +#: src/include/rear/ui.rb:474 +msgid "<p>Choose where the <b>Backup</b> should be stored. Select NFS if you have to use a server that offers Network File System. Please specify the location as follows: <tt>nfs://hostname/directory</tt>. You can also choose USB to store your backup on an USB stick or USB disk.</p>" +msgstr "<p><b>백업</b>을 저장할 장소를 선택하십시오. 네트워크 파일 시스템을 제공하는 서버를 사용해야 하는 경우 NFS를 선택하십시오. <tt>nfs://hostname/directory</tt>와 같이 위치를 지정하십시오. USB 스틱 또는 USB 디스크에 백업을 저장하려면 USB를 선택할 수도 있습니다.</p>" -#: src/include/rear/ui.rb:477 -msgid "" -"<p>If no USB devices are shown, attach an USB stick or an USB disk and click " -"<b>Rescan USB Devices</b>.</p>" -msgstr "" -"<p>USB 장치가 표시되지 않으면 USB 스틱 또는 USB 디스크를 연결하고 <b>USB 장" -"치 다시 스캔</b>을 클릭하십시오.</p>" +#: src/include/rear/ui.rb:477 +msgid "<p>If no USB devices are shown, attach an USB stick or an USB disk and click <b>Rescan USB Devices</b>.</p>" +msgstr "<p>USB 장치가 표시되지 않으면 USB 스틱 또는 USB 디스크를 연결하고 <b>USB 장치 다시 스캔</b>을 클릭하십시오.</p>" -#: src/include/rear/ui.rb:480 -msgid "" -"<p>Select <b>Keep old backup</b> if you don't want the previous backup copy " -"to be overwritten.</p>" -msgstr "" -"<p>이전 백업 복사본을 덮어쓰지 않으려면 <b>이전 백업 유지</b>를 선택하십시오." -"</p>" +#: src/include/rear/ui.rb:480 +msgid "<p>Select <b>Keep old backup</b> if you don't want the previous backup copy to be overwritten.</p>" +msgstr "<p>이전 백업 복사본을 덮어쓰지 않으려면 <b>이전 백업 유지</b>를 선택하십시오.</p>" -#: src/include/rear/ui.rb:483 -msgid "" -"<p>The <b>Advanced</b> menu offers to add <b>additional directories to the " -"backup</b> and <b>additional kernel modules to the rescue system</b>. That's " -"only useful if your backup doesn't contain all the needed directories or the " -"rescue system doesn't boot due to missing kernel modules.</p>" -msgstr "" -"<p><b>고급</b> 메뉴는 <b>백업에 디렉터리를 추가</b>하고 <b>복구 시스템에 커" -"널 모듈을 추가</b>하는 기능을 제공합니다. 이러한 기능은 필요한 모든 디렉터리" -"가 백업에 포함되어 있지 않거나 누락된 커널 모듈로 인해 복구 시스템이 부팅하" -"지 않을 경우에만 유용합니다.</p>" +#: src/include/rear/ui.rb:483 +msgid "<p>The <b>Advanced</b> menu offers to add <b>additional directories to the backup</b> and <b>additional kernel modules to the rescue system</b>. That's only useful if your backup doesn't contain all the needed directories or the rescue system doesn't boot due to missing kernel modules.</p>" +msgstr "<p><b>고급</b> 메뉴는 <b>백업에 디렉터리를 추가</b>하고 <b>복구 시스템에 커널 모듈을 추가</b>하는 기능을 제공합니다. 이러한 기능은 필요한 모든 디렉터리가 백업에 포함되어 있지 않거나 누락된 커널 모듈로 인해 복구 시스템이 부팅하지 않을 경우에만 유용합니다.</p>" -#: src/include/rear/ui.rb:486 -msgid "" -"<p>The <b>Save and run rear now</b> button runs rear and shows rear's " -"output. <strong>Make sure to test if the created backup works as expected on " -"your system!</strong></p>" -msgstr "" -"<p><b>지금 Rear 저장 및 실행</b> 버튼을 누르면 Rear가 실행되고 Rear의 출력이 " -"표시됩니다. <strong>생성한 백업이 시스템에서 예상대로 작동하는지 테스트하십시" -"오!</strong></p>" +#: src/include/rear/ui.rb:486 +msgid "<p>The <b>Save and run rear now</b> button runs rear and shows rear's output. <strong>Make sure to test if the created backup works as expected on your system!</strong></p>" +msgstr "<p><b>지금 Rear 저장 및 실행</b> 버튼을 누르면 Rear가 실행되고 Rear의 출력이 표시됩니다. <strong>생성한 백업이 시스템에서 예상대로 작동하는지 테스트하십시오!</strong></p>" -#: src/include/rear/ui.rb:489 -msgid "" -"<p><b>OK</b> saves the configuration and quits while <b>Cancel</b> closes " -"the configuration dialog without saving.<p>" -msgstr "" -"<p><b>확인</b>을 클릭하면 구성이 저장된 후 종료되는 반면 <b>취소</b>를 클릭하" -"면 저장 없이 구성 대화 상자가 닫힙니다.<p>" +#: src/include/rear/ui.rb:489 +msgid "<p><b>OK</b> saves the configuration and quits while <b>Cancel</b> closes the configuration dialog without saving.<p>" +msgstr "<p><b>확인</b>을 클릭하면 구성이 저장된 후 종료되는 반면 <b>취소</b>를 클릭하면 저장 없이 구성 대화 상자가 닫힙니다.<p>" -#. Set defaults: -#. This is not mandatory, so we only set it, if empty -#: src/include/rear/ui.rb:513 +#. Set defaults: +#. This is not mandatory, so we only set it, if empty +#: src/include/rear/ui.rb:513 msgid "Additional directories in the backup:" msgstr "백업의 추가 디렉토리:" -#: src/include/rear/ui.rb:517 +#: src/include/rear/ui.rb:517 msgid "Additional programs in the rescue system:" msgstr "구조 시스템의 추가 프로그램:" -#: src/include/rear/ui.rb:520 +#: src/include/rear/ui.rb:520 msgid "Additional files to be copied into the rescue system:" msgstr "구조 시스템으로 복사할 추가 파일:" -#: src/include/rear/ui.rb:523 +#: src/include/rear/ui.rb:523 msgid "Additional post recovery scripts:" msgstr "추가 사후 복구 스크립트:" -#: src/include/rear/ui.rb:527 +#: src/include/rear/ui.rb:527 msgid "YaST would like to change your ReaR configuration." msgstr "YaST가 ReaR 구성을 변경하려고 합니다." -#: src/include/rear/ui.rb:530 +#: src/include/rear/ui.rb:530 msgid "You might end up in an unusable backup if you don't accept this." msgstr "수락하지 않으면 사용할 수 없는 백업이 생성될 수 있습니다." -#. prepare advanced menu -#: src/include/rear/ui.rb:553 +#. prepare advanced menu +#: src/include/rear/ui.rb:553 msgid "Additional Directories in Backup" msgstr "백업의 추가 디렉터리" -#: src/include/rear/ui.rb:557 +#: src/include/rear/ui.rb:557 msgid "Additional Kernel Modules in Rescue System" msgstr "복구 시스템의 추가 커널 모듈" -#. handle advanced menu -#: src/include/rear/ui.rb:561 src/include/rear/ui.rb:782 +#. handle advanced menu +#: src/include/rear/ui.rb:561 src/include/rear/ui.rb:782 msgid "Required Programs" msgstr "필수 프로그램" -#: src/include/rear/ui.rb:565 src/include/rear/ui.rb:787 +#: src/include/rear/ui.rb:565 src/include/rear/ui.rb:787 msgid "Copy As Is" msgstr "그대로 복사" -#: src/include/rear/ui.rb:569 src/include/rear/ui.rb:792 +#: src/include/rear/ui.rb:569 src/include/rear/ui.rb:792 msgid "Post Recovery Script" msgstr "사후 복구 스크립트" -#. prepare main dialog -#: src/include/rear/ui.rb:579 +#. prepare main dialog +#: src/include/rear/ui.rb:579 msgid "Recovery System" msgstr "복구 시스템" -#: src/include/rear/ui.rb:587 +#: src/include/rear/ui.rb:587 msgid "&Boot Media" msgstr "부팅 미디어(&B)" -#: src/include/rear/ui.rb:597 +#: src/include/rear/ui.rb:597 msgid "Backup" msgstr "백업" -#: src/include/rear/ui.rb:605 +#: src/include/rear/ui.rb:605 msgid "&Backup Media" msgstr "백업 미디어(&B)" -#. this flag ensures that the combox is correctly -#. refilled when the USB/NFS combobox is changed -#: src/include/rear/ui.rb:614 src/include/rear/ui.rb:732 -#: src/include/rear/ui.rb:746 +#. this flag ensures that the combox is correctly +#. refilled when the USB/NFS combobox is changed +#: src/include/rear/ui.rb:614 src/include/rear/ui.rb:732 +#: src/include/rear/ui.rb:746 msgid "&Location" msgstr "위치(&L)" -#: src/include/rear/ui.rb:625 +#: src/include/rear/ui.rb:625 msgid "&Keep old backup" msgstr "이전 백업 유지(&K)" -#: src/include/rear/ui.rb:632 +#: src/include/rear/ui.rb:632 msgid "Use &dhclient" msgstr "dhclient 사용(&D)" -#: src/include/rear/ui.rb:638 +#: src/include/rear/ui.rb:638 msgid "Rescan USB Devices" msgstr "USB 장치 다시 스캔" -#: src/include/rear/ui.rb:641 +#: src/include/rear/ui.rb:641 msgid "&Backup Options" msgstr "백업 옵션(&B)" -#: src/include/rear/ui.rb:647 +#: src/include/rear/ui.rb:647 msgid "Advanced" msgstr "고급" -#: src/include/rear/ui.rb:649 +#: src/include/rear/ui.rb:649 msgid "Save and run rear now" msgstr "지금 Rear 저장 및 실행" -#. set settings according to options read from config file. -#: src/include/rear/ui.rb:669 +#. set settings according to options read from config file. +#: src/include/rear/ui.rb:669 msgid "BACKUP is set to an unknown value.\n" msgstr "BACKUP이 알 수 없는 값으로 설정되었습니다.\n" -#. choose selected option or fallback to "ISO" if nothing is set -#: src/include/rear/ui.rb:682 +#. choose selected option or fallback to "ISO" if nothing is set +#: src/include/rear/ui.rb:682 msgid "OUTPUT is set to an unknown value.\n" msgstr "OUTPUT이 알 수 없는 값으로 설정되었습니다.\n" -#: src/include/rear/ui.rb:699 +#: src/include/rear/ui.rb:699 msgid "NETFS_URL is set to an unknown value or in wrong format.\n" msgstr "NETFS_URL이 알 수 없는 값으로 설정되었거나 형식이 잘못되었습니다.\n" -#: src/include/rear/ui.rb:708 -msgid "" -"Your rear configuration file contains options this YaST2 module cannot " -"configure.\n" -msgstr "" -"Rear 구성 파일에는 이 YaST2 모듈이 구성할 수 없는 옵션이 포함되어 있습니다.\n" +#: src/include/rear/ui.rb:708 +msgid "Your rear configuration file contains options this YaST2 module cannot configure.\n" +msgstr "Rear 구성 파일에는 이 YaST2 모듈이 구성할 수 없는 옵션이 포함되어 있습니다.\n" -#: src/include/rear/ui.rb:713 +#: src/include/rear/ui.rb:713 msgid "Do you want to continue and overwrite these settings?" msgstr "계속 진행하여 이러한 설정을 덮어쓰시겠습니까?" -#. open run rear dialg, if usb boot medium is selected show a warning -#: src/include/rear/ui.rb:757 +#. open run rear dialg, if usb boot medium is selected show a warning +#: src/include/rear/ui.rb:757 msgid "Your USB medium will be overwritten. Do you want to continue?" msgstr "USB 매체를 덮어쓰게 됩니다. 계속하시겠습니까?" -#. true: read-only -#. Rear read dialog caption -#: src/include/rear/ui.rb:821 +#. true: read-only +#. Rear read dialog caption +#: src/include/rear/ui.rb:821 msgid "Reading Rear Configuration" msgstr "Rear 구성 읽기" -#: src/include/rear/ui.rb:828 +#: src/include/rear/ui.rb:828 msgid "Analyzing system" msgstr "시스템 분석 중" -#: src/include/rear/ui.rb:828 +#: src/include/rear/ui.rb:828 msgid "Reading rear settings" msgstr "Rear 설정을 읽는 중" -#: src/include/rear/ui.rb:829 +#: src/include/rear/ui.rb:829 msgid "Analyzing system..." msgstr "시스템 분석 중..." -#: src/include/rear/ui.rb:829 +#: src/include/rear/ui.rb:829 msgid "Reading rear settings..." msgstr "Rear 설정을 읽는 중..." -#: src/include/rear/ui.rb:829 +#: src/include/rear/ui.rb:829 msgid "Finished" msgstr "완료됨" -#. Copyright (c) 2017 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/rear/add_config_dialog.rb:43 +#. Copyright (c) 2017 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/rear/add_config_dialog.rb:43 msgid "Your ReaR configuration needs to be modified." msgstr "ReaR 구성을 수정해야 합니다." -#. Copyright (c) 2017 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/rear/list_edit_dialog.rb:46 +#. Copyright (c) 2017 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/rear/list_edit_dialog.rb:46 msgid "&New Entry" msgstr "새로운 항목(&N)" -#. check bootloader -#. returns error message if system is not supported -#: src/modules/RearSystemCheck.rb:58 src/modules/RearSystemCheck.rb:79 +#. check bootloader +#. returns error message if system is not supported +#: src/modules/RearSystemCheck.rb:58 src/modules/RearSystemCheck.rb:79 msgid "Cannot figure out which bootloader is used." msgstr "어떤 부트 로더가 사용되는지 확인할 수 없습니다." -#: src/modules/RearSystemCheck.rb:70 +#: src/modules/RearSystemCheck.rb:70 msgid "Bootloader %1 is used." msgstr "%1 부트 로더가 사용됩니다." -#. check devices -#: src/modules/RearSystemCheck.rb:108 +#. check devices +#: src/modules/RearSystemCheck.rb:108 msgid "Device %1 is iscsi." msgstr "%1 장치는 iSCSI입니다." -#: src/modules/RearSystemCheck.rb:120 +#: src/modules/RearSystemCheck.rb:120 msgid "Device %1 is multipath." msgstr "%1 장치는 다중 경로입니다." -#: src/modules/RearSystemCheck.rb:143 +#: src/modules/RearSystemCheck.rb:143 msgid "Partition %1 uses an unsupported filesystem (%2)." msgstr "%1 파티션은 지원되지 않는 파일 시스템(%2)을 사용합니다." Modified: branches/SLE12-SP3/yast/ko/po/registration.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/registration.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/registration.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -15,215 +15,211 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#. popup message -#. popup message -#. popup message -#: src/clients/inst_scc.rb:54 src/clients/scc_auto.rb:49 -#: src/lib/registration/registration_ui.rb:40 +#. popup message +#. popup message +#. popup message +#: src/clients/inst_scc.rb:54 src/clients/scc_auto.rb:49 +#: src/lib/registration/registration_ui.rb:40 msgid "Contacting the Registration Server" msgstr "등록 서버에 연결" -#. check the base product at start to avoid problems later -#. Translators: Text for UI Label - capitalized -#. dialog title -#. just set an empty Wizard dialog to replace the current one after -#. pressing "Next" -#. dialog title -#. display and run a dialog for updating the current registration -#. @return [Symbol] user input -#: src/clients/inst_scc.rb:189 -#: src/lib/registration/ui/autoyast_config_dialog.rb:104 -#: src/lib/registration/ui/base_system_registration_dialog.rb:61 -#: src/lib/registration/ui/migration_repos_workflow.rb:287 -#: src/lib/registration/ui/registered_system_dialog.rb:37 -#: src/lib/registration/ui/registration_update_dialog.rb:41 +#. check the base product at start to avoid problems later +#. Translators: Text for UI Label - capitalized +#. dialog title +#. just set an empty Wizard dialog to replace the current one after +#. pressing "Next" +#. dialog title +#. display and run a dialog for updating the current registration +#. @return [Symbol] user input +#: src/clients/inst_scc.rb:189 +#: src/lib/registration/ui/autoyast_config_dialog.rb:104 +#: src/lib/registration/ui/base_system_registration_dialog.rb:61 +#: src/lib/registration/ui/migration_repos_workflow.rb:287 +#: src/lib/registration/ui/registered_system_dialog.rb:37 +#: src/lib/registration/ui/registration_update_dialog.rb:41 msgid "Registration" msgstr "등록" -#. Command line help text for the repository module, %1 is "SUSEconnect" -#. Command line help text for the repository module, %1 is "SUSEconnect" -#: src/clients/registration.rb:68 src/clients/scc.rb:68 +#. Command line help text for the repository module, %1 is "SUSEconnect" +#. Command line help text for the repository module, %1 is "SUSEconnect" +#: src/clients/registration.rb:68 src/clients/scc.rb:68 msgid "Use '%s' instead of this YaST module." msgstr "이 YaST 모듈 대신 '%s'을(를) 사용하십시오." -#. TRANSLATORS: Error message in RichText format, %s contains the details from libzypp -#. TRANSLATORS: Error message in RichText format, %s contains the details from libzypp -#: src/clients/registration.rb:79 src/clients/scc.rb:79 -msgid "" -"<p>The repository initialization failed. Disable (or remove) the offending " -"service or repository in the repository manager.</p><p>Details:</p><p>%s</p>" -msgstr "" -"<p>리포지토리 초기화가 실패했습니다. 리포지토리 관리자에서 문제의 서비스나 리" -"포지토리를 비활성화 또는 제거하십시오.</p><p>세부 사항:</p><p>%s</p>" +#. TRANSLATORS: Error message in RichText format, %s contains the details from libzypp +#. TRANSLATORS: Error message in RichText format, %s contains the details from libzypp +#: src/clients/registration.rb:79 src/clients/scc.rb:79 +msgid "<p>The repository initialization failed. Disable (or remove) the offending service or repository in the repository manager.</p><p>Details:</p><p>%s</p>" +msgstr "<p>리포지토리 초기화가 실패했습니다. 리포지토리 관리자에서 문제의 서비스나 리포지토리를 비활성화 또는 제거하십시오.</p><p>세부 사항:</p><p>%s</p>" -#. popup message: registration finished properly -#: src/clients/scc_auto.rb:204 +#. popup message: registration finished properly +#: src/clients/scc_auto.rb:204 msgid "Registration was successfull." msgstr "등록에 성공했습니다." -#. remove possible duplicates -#: src/clients/scc_auto.rb:232 +#. remove possible duplicates +#: src/clients/scc_auto.rb:232 msgid "SLP discovery failed, no server found" msgstr "SLP 검색에 실패했습니다. 서버를 찾을 수 없습니다." -#. download and install the specified SSL certificate to the system -#. @param url [String] URL of the certificate -#: src/clients/scc_auto.rb:250 +#. download and install the specified SSL certificate to the system +#. @param url [String] URL of the certificate +#: src/clients/scc_auto.rb:250 msgid "Downloading SSL Certificate" msgstr "SSL 인증서 다운로드 중" -#: src/clients/scc_auto.rb:254 +#: src/clients/scc_auto.rb:254 msgid "Importing SSL Certificate" msgstr "SSL 인증서 임포트 중" -#. %s is name of given product -#. then register the product(s) -#. %s is name of given product -#: src/clients/scc_auto.rb:329 src/lib/registration/registration_ui.rb:286 -#: src/lib/registration/registration_ui.rb:319 +#. %s is name of given product +#. then register the product(s) +#. %s is name of given product +#: src/clients/scc_auto.rb:329 src/lib/registration/registration_ui.rb:286 +#: src/lib/registration/registration_ui.rb:319 msgid "Registering %s ..." msgstr "%s 등록 중..." -#. display the extension selection dialog and wait for a button click -#. @return [Symbol] user input (:import, :cancel) -#: src/data/registration/autoyast_summary.erb:5 -#: src/lib/registration/ui/autoyast_config_dialog.rb:55 +#. display the extension selection dialog and wait for a button click +#. @return [Symbol] user input (:import, :cancel) +#: src/data/registration/autoyast_summary.erb:5 +#: src/lib/registration/ui/autoyast_config_dialog.rb:55 msgid "Product Registration" msgstr "제품 등록" -#: src/data/registration/autoyast_summary.erb:9 +#: src/data/registration/autoyast_summary.erb:9 msgid "Run registration during autoinstallation" msgstr "자동 설치 중에 등록 실행" -#: src/data/registration/autoyast_summary.erb:10 +#: src/data/registration/autoyast_summary.erb:10 msgid "Skip registration during autoinstallation" msgstr "자동 설치 중에 등록 건너뛰기" -#: src/data/registration/autoyast_summary.erb:15 +#: src/data/registration/autoyast_summary.erb:15 msgid "Registration Settings" msgstr "등록 설정" -#: src/data/registration/autoyast_summary.erb:17 +#: src/data/registration/autoyast_summary.erb:17 msgid "E-mail Address: %s" msgstr "전자 메일 주소: %s" -#: src/data/registration/autoyast_summary.erb:19 +#: src/data/registration/autoyast_summary.erb:19 msgid "Registration Code is Configured" msgstr "등록 코드가 구성되었습니다." -#: src/data/registration/autoyast_summary.erb:23 +#: src/data/registration/autoyast_summary.erb:23 msgid "Install Available Updates" msgstr "사용 가능한 업데이트 설치" -#: src/data/registration/autoyast_summary.erb:27 +#: src/data/registration/autoyast_summary.erb:27 msgid "Registration Server" msgstr "등록 서버" -#: src/data/registration/autoyast_summary.erb:30 -#: src/data/registration/autoyast_summary.erb:32 +#: src/data/registration/autoyast_summary.erb:30 +#: src/data/registration/autoyast_summary.erb:32 msgid "Server URL: %s" msgstr "서버 URL: %s" -#: src/data/registration/autoyast_summary.erb:32 +#: src/data/registration/autoyast_summary.erb:32 msgid "Use SLP discovery" msgstr "SLP 검색 사용" -#: src/data/registration/autoyast_summary.erb:36 +#: src/data/registration/autoyast_summary.erb:36 msgid "SSL Server Certificate URL: %s" msgstr "SSL 서버 인증서 URL: %s" -#: src/data/registration/autoyast_summary.erb:40 +#: src/data/registration/autoyast_summary.erb:40 msgid "SSL Certificate Fingerprint: %s" msgstr "SSL 인증서 지문: %s" -#: src/data/registration/autoyast_summary.erb:48 +#: src/data/registration/autoyast_summary.erb:48 msgid "Extensions and Modules" msgstr "확장 및 모듈" -#: src/data/registration/certificate_error.erb:6 +#: src/data/registration/certificate_error.erb:6 msgid "Secure Connection Error" msgstr "보안 연결 오류" -#: src/data/registration/certificate_error.erb:10 +#: src/data/registration/certificate_error.erb:10 msgid "Details:" msgstr "세부사항:" -#: src/data/registration/certificate_error.erb:14 +#: src/data/registration/certificate_error.erb:14 msgid "Failed Certificate Details" msgstr "실패한 인증서 세부 사항" -#: src/data/registration/certificate_summary.erb:4 -#: src/lib/registration/ssl_certificate_details.rb:34 +#: src/data/registration/certificate_summary.erb:4 +#: src/lib/registration/ssl_certificate_details.rb:34 msgid "Issued To" msgstr "발급 대상" -#. label followed by the SSL certificate identification -#: src/data/registration/certificate_summary.erb:7 -#: src/data/registration/certificate_summary.erb:16 -#: src/lib/registration/ssl_certificate_details.rb:60 +#. label followed by the SSL certificate identification +#: src/data/registration/certificate_summary.erb:7 +#: src/data/registration/certificate_summary.erb:16 +#: src/lib/registration/ssl_certificate_details.rb:60 msgid "Common Name (CN): " msgstr "CN(일반 이름): " -#. label followed by the SSL certificate identification -#: src/data/registration/certificate_summary.erb:8 -#: src/data/registration/certificate_summary.erb:17 -#: src/lib/registration/ssl_certificate_details.rb:62 +#. label followed by the SSL certificate identification +#: src/data/registration/certificate_summary.erb:8 +#: src/data/registration/certificate_summary.erb:17 +#: src/lib/registration/ssl_certificate_details.rb:62 msgid "Organization (O): " msgstr "O(조직): " -#. label followed by the SSL certificate identification -#: src/data/registration/certificate_summary.erb:9 -#: src/data/registration/certificate_summary.erb:18 -#: src/lib/registration/ssl_certificate_details.rb:64 +#. label followed by the SSL certificate identification +#: src/data/registration/certificate_summary.erb:9 +#: src/data/registration/certificate_summary.erb:18 +#: src/lib/registration/ssl_certificate_details.rb:64 msgid "Organization Unit (OU): " msgstr "OU(조직 구성 단위): " -#: src/data/registration/certificate_summary.erb:13 -#: src/lib/registration/ssl_certificate_details.rb:35 +#: src/data/registration/certificate_summary.erb:13 +#: src/lib/registration/ssl_certificate_details.rb:35 msgid "Issued By" msgstr "발급자" -#: src/data/registration/certificate_summary.erb:22 +#: src/data/registration/certificate_summary.erb:22 msgid "Validity" msgstr "유효 기간" -#: src/data/registration/certificate_summary.erb:26 +#: src/data/registration/certificate_summary.erb:26 msgid "Issued On: " msgstr "발급 날짜: " -#: src/data/registration/certificate_summary.erb:29 +#: src/data/registration/certificate_summary.erb:29 msgid "WARNING: The certificate is not valid yet!" msgstr "경고: 인증서가 아직 유효하지 않습니다." -#: src/data/registration/certificate_summary.erb:32 +#: src/data/registration/certificate_summary.erb:32 msgid "Expires On: " msgstr "만료: " -#: src/data/registration/certificate_summary.erb:35 +#: src/data/registration/certificate_summary.erb:35 msgid "WARNING: The certificate has expired!" msgstr "경고: 인증서가 만료되었습니다!" -#: src/data/registration/certificate_summary.erb:43 +#: src/data/registration/certificate_summary.erb:43 msgid "Serial Number: " msgstr "일련번호: " -#: src/data/registration/certificate_summary.erb:44 -#: src/lib/registration/ssl_certificate_details.rb:35 +#: src/data/registration/certificate_summary.erb:44 +#: src/lib/registration/ssl_certificate_details.rb:35 msgid "SHA1 Fingerprint: " msgstr "SHA1 지문: " -#: src/data/registration/certificate_summary.erb:46 -#: src/lib/registration/ssl_certificate_details.rb:37 +#: src/data/registration/certificate_summary.erb:46 +#: src/lib/registration/ssl_certificate_details.rb:37 msgid "SHA256 Fingerprint: " msgstr "SHA256 지문: " -#. FIXME: to not break existing translation, this typo should be fixed -#. later after SP2: time -> timed -#: src/lib/registration/connect_helpers.rb:80 +#. FIXME: to not break existing translation, this typo should be fixed +#. later after SP2: time -> timed +#: src/lib/registration/connect_helpers.rb:80 msgid "Connection time out." msgstr "연결 시간이 초과되었습니다." -#: src/lib/registration/connect_helpers.rb:81 +#: src/lib/registration/connect_helpers.rb:81 msgid "" "Make sure that the registration server is reachable and\n" "the connection is reliable." @@ -231,13 +227,13 @@ "등록 서버가 연결되어 있는지 및\n" "신뢰할 수 있는 연결인지 확인하십시오." -#. TRANSLATORS: additional hint for an error message -#: src/lib/registration/connect_helpers.rb:91 +#. TRANSLATORS: additional hint for an error message +#: src/lib/registration/connect_helpers.rb:91 msgid "Check that this system is known to the registration server." msgstr "등록 서버에서 이 시스템을 인식하는지 확인하십시오." -#. TRANSLATORS: additional hint for an error message -#: src/lib/registration/connect_helpers.rb:97 +#. TRANSLATORS: additional hint for an error message +#: src/lib/registration/connect_helpers.rb:97 msgid "" "If you are upgrading from SLE11 make sure the SCC server\n" "knows the old NCC registration. Synchronization from NCC to SCC\n" @@ -257,24 +253,24 @@ "로그인 후 몇 분만 기다리면\n" "업그레이드를 재시도할 수 있습니다." -#. add the hint to the error details -#. update the message when an old SMT server is found -#. Error popup -#. update the message when an old SMT server is found -#: src/lib/registration/connect_helpers.rb:111 -#: src/lib/registration/connect_helpers.rb:116 -#: src/lib/registration/connect_helpers.rb:119 -#: src/lib/registration/connect_helpers.rb:126 -#: src/lib/registration/connect_helpers.rb:177 -#: src/lib/registration/connect_helpers.rb:181 +#. add the hint to the error details +#. update the message when an old SMT server is found +#. Error popup +#. update the message when an old SMT server is found +#: src/lib/registration/connect_helpers.rb:111 +#: src/lib/registration/connect_helpers.rb:116 +#: src/lib/registration/connect_helpers.rb:119 +#: src/lib/registration/connect_helpers.rb:126 +#: src/lib/registration/connect_helpers.rb:177 +#: src/lib/registration/connect_helpers.rb:181 msgid "Connection to registration server failed." msgstr "등록 서버 연결이 실패했습니다." -#: src/lib/registration/connect_helpers.rb:121 +#: src/lib/registration/connect_helpers.rb:121 msgid "Registration client error." msgstr "등록 클라이언트 오류입니다." -#: src/lib/registration/connect_helpers.rb:123 +#: src/lib/registration/connect_helpers.rb:123 msgid "" "Registration server error.\n" "Retry the operation later." @@ -282,20 +278,20 @@ "등록 서버 오류입니다.\n" "나중에 작업을 재시도하십시오." -#. error message -#: src/lib/registration/connect_helpers.rb:165 +#. error message +#: src/lib/registration/connect_helpers.rb:165 msgid "Received SSL Certificate does not match the expected certificate." msgstr "받은 SSL 인증서가 예상한 인증서와 일치하지 않습니다." -#. %s are error details -#: src/lib/registration/connect_helpers.rb:198 +#. %s are error details +#: src/lib/registration/connect_helpers.rb:198 msgid "Details: %s" msgstr "세부 사항: %s" -#. TRANSLATORS: multiline error message - a SSL certificate has been -#. imported but the registration server still cannot be accessed securely, -#. user has to solve the certificate issue manually. -#: src/lib/registration/connect_helpers.rb:227 +#. TRANSLATORS: multiline error message - a SSL certificate has been +#. imported but the registration server still cannot be accessed securely, +#. user has to solve the certificate issue manually. +#: src/lib/registration/connect_helpers.rb:227 msgid "" "A certificate has been already imported\n" "but the server connection still cannot be trusted.\n" @@ -309,23 +305,23 @@ "인증서 문제를 수동으로 해결하고 서버를 안전하게 연결하고\n" "YaST 모듈을 다시 시작할 수 있는지 확인하십시오." -#. progress label -#: src/lib/registration/connect_helpers.rb:239 +#. progress label +#: src/lib/registration/connect_helpers.rb:239 msgid "Importing the SSL certificate" msgstr "SSL 인증서 임포트" -#: src/lib/registration/connect_helpers.rb:240 +#: src/lib/registration/connect_helpers.rb:240 msgid "Importing '%s' certificate..." msgstr "'%s' 인증서 임포트 중..." -#. workaround after string freeze -#: src/lib/registration/connect_helpers.rb:264 +#. workaround after string freeze +#: src/lib/registration/connect_helpers.rb:264 msgid "Secure connection error: %s" msgstr "보안 연결 오류: %s" -#. TRANSLATORS: error message, %s is a server URL, -#. e.g. https://smt.example.com -#: src/lib/registration/connect_helpers.rb:283 +#. TRANSLATORS: error message, %s is a server URL, +#. e.g. https://smt.example.com +#: src/lib/registration/connect_helpers.rb:283 msgid "" "An old registration server was detected at\n" "%s.\n" @@ -337,15 +333,15 @@ "서버에 새 등록 프로토콜을 지원하는 최신\n" "제품이 설치되었는지 확인하십시오." -#. FIXME: use a better message, this one has been reused after the text freeze -#. error message, the entered URL is not valid. -#: src/lib/registration/connect_helpers.rb:295 -#: src/lib/registration/ui/base_system_registration_dialog.rb:544 +#. FIXME: use a better message, this one has been reused after the text freeze +#. error message, the entered URL is not valid. +#: src/lib/registration/connect_helpers.rb:295 +#: src/lib/registration/ui/base_system_registration_dialog.rb:544 msgid "Invalid URL." msgstr "URL이 잘못되었습니다." -#. Error popup -#: src/lib/registration/connect_helpers.rb:299 +#. Error popup +#: src/lib/registration/connect_helpers.rb:299 msgid "" "Network is not configured, the registration server cannot be reached.\n" "Do you want to configure the network now?" @@ -353,17 +349,17 @@ "네트워크가 구성되지 않았습니다. 등록 서버에 연결할 수 없습니다.\n" "지금 네트워크를 구성하시겠습니까?" -#: src/lib/registration/connect_helpers.rb:306 +#: src/lib/registration/connect_helpers.rb:306 msgid "Network error, check the network configuration." msgstr "네트워크 오류입니다. 네트워크 구성을 확인하십시오." -#. progress step title -#: src/lib/registration/finish_dialog.rb:35 +#. progress step title +#: src/lib/registration/finish_dialog.rb:35 msgid "Storing Registration Configuration..." msgstr "등록 구성 저장 중..." -#. error message -#: src/lib/registration/helpers.rb:234 +#. error message +#: src/lib/registration/helpers.rb:234 msgid "" "The base product was not found,\n" "check your system." @@ -371,8 +367,8 @@ "기본 제품을 찾을 수 없습니다.\n" "시스템을 확인하십시오." -#. TRANSLATORS: %s = bugzilla URL -#: src/lib/registration/helpers.rb:238 +#. TRANSLATORS: %s = bugzilla URL +#: src/lib/registration/helpers.rb:238 msgid "" "The installation medium or the installer itself is seriously broken.\n" "Report a bug at %s." @@ -380,7 +376,7 @@ "설치 매체나 설치 프로그램이 심각하게 손상되었습니다.\n" "%s에서 버그를 신고하십시오." -#: src/lib/registration/helpers.rb:241 +#: src/lib/registration/helpers.rb:241 msgid "" "Make sure a product is installed and /etc/products.d/baseproduct\n" "is a symlink pointing to the base product .prod file." @@ -388,56 +384,56 @@ "제품이 설치되어 있고 /etc/products.d/baseproduct가\n" "기본 제품 .prod 파일을 가리키는 symlink인지 확인하십시오." -#. FIXME: reused an existing message due to text freeze -#. (later use a better text, it's system update actually...) -#: src/lib/registration/registration_ui.rb:80 -#: src/lib/registration/registration_ui.rb:272 +#. FIXME: reused an existing message due to text freeze +#. (later use a better text, it's system update actually...) +#: src/lib/registration/registration_ui.rb:80 +#: src/lib/registration/registration_ui.rb:272 msgid "Registering the System..." msgstr "시스템을 등록하는 중입니다." -#. updating base product registration, %s is a new base product name -#. updating product registration, %s is a product name -#. updating registered addon/extension, %s is an extension name -#. TRANSLATORS: Progress label -#: src/lib/registration/registration_ui.rb:106 -#: src/lib/registration/registration_ui.rb:149 -#: src/lib/registration/registration_ui.rb:357 -#: src/lib/registration/ui/migration_repos_workflow.rb:304 +#. updating base product registration, %s is a new base product name +#. updating product registration, %s is a product name +#. updating registered addon/extension, %s is an extension name +#. TRANSLATORS: Progress label +#: src/lib/registration/registration_ui.rb:106 +#: src/lib/registration/registration_ui.rb:149 +#: src/lib/registration/registration_ui.rb:357 +#: src/lib/registration/ui/migration_repos_workflow.rb:304 msgid "Updating to %s ..." msgstr "%s(으)로 업데이트 중 ..." -#. TRANSLATORS: progress label -#: src/lib/registration/registration_ui.rb:166 +#. TRANSLATORS: progress label +#: src/lib/registration/registration_ui.rb:166 msgid "Synchronizing Products..." msgstr "제품을 동기화하는 중..." -#. load available addons from SCC server -#. the result is cached to avoid reloading when going back and forth in the -#. installation workflow -#. @return [ArrayRegistration::Addon] available addons -#. download the addons from SCC, let the user select addons to install -#. @return [Symbol] the user input -#: src/lib/registration/registration_ui.rb:180 -#: src/lib/registration/ui/autoyast_config_workflow.rb:106 +#. load available addons from SCC server +#. the result is cached to avoid reloading when going back and forth in the +#. installation workflow +#. @return [ArrayRegistration::Addon] available addons +#. download the addons from SCC, let the user select addons to install +#. @return [Symbol] the user input +#: src/lib/registration/registration_ui.rb:180 +#: src/lib/registration/ui/autoyast_config_workflow.rb:106 msgid "Loading Available Extensions and Modules..." msgstr "사용 가능한 확장 및 모듈을 로드하는 중..." -#: src/lib/registration/registration_ui.rb:195 +#: src/lib/registration/registration_ui.rb:195 msgid "Loading Migration Products..." msgstr "마이그레이션 제품 로드 중..." -#. dialog title -#: src/lib/registration/registration_ui.rb:213 +#. dialog title +#: src/lib/registration/registration_ui.rb:213 msgid "Register Extensions and Modules" msgstr "확장 및 모듈 등록" -#. help text -#: src/lib/registration/registration_ui.rb:217 +#. help text +#: src/lib/registration/registration_ui.rb:217 msgid "<p>Extensions and Modules are being registered.</p>" msgstr "<p>확장 및 모듈을 등록하고 있습니다.</p>" -#. TRANSLATORS: updates popup question (1/2), multiline, max. ~60 chars/line -#: src/lib/registration/registration_ui.rb:242 +#. TRANSLATORS: updates popup question (1/2), multiline, max. ~60 chars/line +#: src/lib/registration/registration_ui.rb:242 msgid "" "The registration server offers update repositories.\n" "\n" @@ -445,8 +441,8 @@ "등록 서버에서 업데이트 리포지토리를 제공합니다.\n" "\n" -#. TRANSLATORS: updates popup question (2/2), multiline, max. ~60 chars/line -#: src/lib/registration/registration_ui.rb:246 +#. TRANSLATORS: updates popup question (2/2), multiline, max. ~60 chars/line +#: src/lib/registration/registration_ui.rb:246 msgid "" "Would you like to enable these repositories during installation\n" "in order to receive the latest updates?" @@ -454,9 +450,9 @@ "최신 업데이트를 받기 위해 설치하는 동안\n" "이 리포지토리를 활성화하시겠습니까?" -#. Yast::Mode.update -#. TRANSLATORS: updates popup question (2/2), multiline, max. ~60 chars/line -#: src/lib/registration/registration_ui.rb:250 +#. Yast::Mode.update +#. TRANSLATORS: updates popup question (2/2), multiline, max. ~60 chars/line +#: src/lib/registration/registration_ui.rb:250 msgid "" "Would you like to enable these repositories during upgrade\n" "in order to receive the latest updates?" @@ -464,15 +460,15 @@ "최신 업데이트를 받기 위해 업그레이드하는 동안\n" "이 리포지토리를 활성화하시겠습니까?" -#. indent size used in summary text -#: src/lib/registration/ssl_certificate_details.rb:34 +#. indent size used in summary text +#: src/lib/registration/ssl_certificate_details.rb:34 msgid "Certificate:" msgstr "인증서:" -#. TRANSLATORS: error popup, %s is a repository name, the popup is displayed -#. when a migration repository cannot be accessed, there are [Skip] -#. and [Abort] buttons displayed below the question -#: src/lib/registration/sw_mgmt.rb:99 +#. TRANSLATORS: error popup, %s is a repository name, the popup is displayed +#. when a migration repository cannot be accessed, there are [Skip] +#. and [Abort] buttons displayed below the question +#: src/lib/registration/sw_mgmt.rb:99 msgid "" "Repository '%s'\n" "cannot be loaded.\n" @@ -484,42 +480,42 @@ "\n" "리포지토리를 건너뛰거나 중단하시겠습니까?" -#. create UI label for a base product -#. @param base_product [Hash] Product (hash from pkg-bindings) -#. @return [String] UI Label -#: src/lib/registration/sw_mgmt.rb:175 +#. create UI label for a base product +#. @param base_product [Hash] Product (hash from pkg-bindings) +#. @return [String] UI Label +#: src/lib/registration/sw_mgmt.rb:175 msgid "Unknown product" msgstr "알 수 없는 제품" -#. error message -#. error message -#: src/lib/registration/sw_mgmt.rb:202 src/lib/registration/sw_mgmt.rb:275 +#. error message +#. error message +#: src/lib/registration/sw_mgmt.rb:202 src/lib/registration/sw_mgmt.rb:275 msgid "Saving repository configuration failed." msgstr "리포지토리 구성 저장에 실패했습니다." -#. # error message -#. error message -#: src/lib/registration/sw_mgmt.rb:238 src/lib/registration/sw_mgmt.rb:249 +#. # error message +#. error message +#: src/lib/registration/sw_mgmt.rb:238 src/lib/registration/sw_mgmt.rb:249 msgid "Updating service '%s' failed." msgstr "'%s' 서비스 업데이트에 실패했습니다." -#. error message -#: src/lib/registration/sw_mgmt.rb:244 +#. error message +#: src/lib/registration/sw_mgmt.rb:244 msgid "Adding service '%s' failed." msgstr "'%s' 서비스 추가에 실패했습니다." -#. error message -#: src/lib/registration/sw_mgmt.rb:256 +#. error message +#: src/lib/registration/sw_mgmt.rb:256 msgid "Saving service '%s' failed." msgstr "'%s' 서비스 저장에 실패했습니다." -#. error message -#: src/lib/registration/sw_mgmt.rb:262 +#. error message +#: src/lib/registration/sw_mgmt.rb:262 msgid "Refreshing service '%s' failed." msgstr "'%s' 서비스 새로 고침에 실패했습니다." -#. TRANSLATORS: %s is a product name -#: src/lib/registration/sw_mgmt.rb:474 +#. TRANSLATORS: %s is a product name +#: src/lib/registration/sw_mgmt.rb:474 msgid "" "Cannot find remote product %s.\n" "The product cannot be registered." @@ -527,30 +523,30 @@ "원격 제품 %s을(를) 찾을 수 없습니다.\n" "이 제품은 등록할 수 없습니다." -#. Use .AnyQuestion instead of .YesNo or .ReallyAbort to have full control -#. on :focus_no and be consistent with the .ConfirmAbort behavior -#: src/lib/registration/ui/abort_confirmation.rb:35 +#. Use .AnyQuestion instead of .YesNo or .ReallyAbort to have full control +#. on :focus_no and be consistent with the .ConfirmAbort behavior +#: src/lib/registration/ui/abort_confirmation.rb:35 msgid "Really abort?" msgstr "정말로 중단하시겠습니까?" -#. dialog title -#: src/lib/registration/ui/addon_eula_dialog.rb:43 +#. dialog title +#: src/lib/registration/ui/addon_eula_dialog.rb:43 msgid "License Agreement" msgstr "사용권 계약" -#: src/lib/registration/ui/addon_eula_dialog.rb:44 +#: src/lib/registration/ui/addon_eula_dialog.rb:44 msgid "Downloading Licenses..." msgstr "라이센스 다운로드 중..." -#. download the addon EULAs to a temp dir -#. @param [Addon] addon the addon -#. @param [String] tmpdir target where to download the files -#: src/lib/registration/ui/addon_eula_dialog.rb:75 +#. download the addon EULAs to a temp dir +#. @param [Addon] addon the addon +#. @param [String] tmpdir target where to download the files +#: src/lib/registration/ui/addon_eula_dialog.rb:75 msgid "Downloading License Agreement..." msgstr "사용권 계약 다운로드 중..." -#. %s is an extension name, e.g. "SUSE Linux Enterprise Software Development Kit" -#: src/lib/registration/ui/addon_eula_dialog.rb:88 +#. %s is an extension name, e.g. "SUSE Linux Enterprise Software Development Kit" +#: src/lib/registration/ui/addon_eula_dialog.rb:88 msgid "" "Downloading the license for\n" "%s\n" @@ -560,312 +556,287 @@ "에 대한 라이센스 다운로드에\n" "실패했습니다." -#. %s is an extension name, e.g. "SUSE Linux Enterprise Software Development Kit" -#: src/lib/registration/ui/addon_eula_dialog.rb:102 +#. %s is an extension name, e.g. "SUSE Linux Enterprise Software Development Kit" +#: src/lib/registration/ui/addon_eula_dialog.rb:102 msgid "%s License Agreement" msgstr "%s 사용권 계약" -#. dialog title -#: src/lib/registration/ui/addon_reg_codes_dialog.rb:46 +#. dialog title +#: src/lib/registration/ui/addon_reg_codes_dialog.rb:46 msgid "Extension and Module Registration Codes" msgstr "확장 및 모듈 등록 코드" -#. help text -#: src/lib/registration/ui/addon_reg_codes_dialog.rb:50 +#. help text +#: src/lib/registration/ui/addon_reg_codes_dialog.rb:50 msgid "" "<p>Enter registration codes for the requested extensions or modules.</p>\n" -"<p>Registration codes are required for successfull registration.If you " -"cannot provide a registration code then go back and deselect the respective " -"extension or module.</p>" +"<p>Registration codes are required for successfull registration.If you cannot provide a registration code then go back and deselect the respective extension or module.</p>" msgstr "" "<p>요청한 확장 또는 모듈의 등록 코드를 입력하십시오.</p>\n" -"<p>등록하려면 등록 코드가 필요합니다. 등록 코드를 제공할 수 없는 경우 돌아가" -"서 해당 확장 또는 모듈을 선택 취소하십시오.</p>" +"<p>등록하려면 등록 코드가 필요합니다. 등록 코드를 제공할 수 없는 경우 돌아가서 해당 확장 또는 모듈을 선택 취소하십시오.</p>" -#. part of the UI - labels in the dialog -#. @return [ArrayYast::Term] UI definition -#: src/lib/registration/ui/addon_reg_codes_dialog.rb:102 +#. part of the UI - labels in the dialog +#. @return [ArrayYast::Term] UI definition +#: src/lib/registration/ui/addon_reg_codes_dialog.rb:102 msgid "The extension you selected needs a separate registration code." msgid_plural "The extensions you selected need separate registration codes." msgstr[0] "선택한 확장에는 별도의 등록 코드가 필요합니다." -#: src/lib/registration/ui/addon_reg_codes_dialog.rb:111 +#: src/lib/registration/ui/addon_reg_codes_dialog.rb:111 msgid "Enter the registration code into the field below." msgid_plural "Enter the registration codes into the fields below." msgstr[0] "아래 필드에 등록 코드를 입력하십시오." -#. create the main dialog definition -#. @return [Yast::Term] the main UI dialog term -#: src/lib/registration/ui/addon_selection_base_dialog.rb:97 +#. create the main dialog definition +#. @return [Yast::Term] the main UI dialog term +#: src/lib/registration/ui/addon_selection_base_dialog.rb:97 msgid "&Filter Out Beta Versions" msgstr "베타 버전 필터링(&F)" -#: src/lib/registration/ui/addon_selection_base_dialog.rb:99 +#: src/lib/registration/ui/addon_selection_base_dialog.rb:99 msgid "Details" msgstr "자세히" -#. addon description widget -#. @return [Yast::Term] the addon details widget -#: src/lib/registration/ui/addon_selection_base_dialog.rb:109 +#. addon description widget +#. @return [Yast::Term] the addon details widget +#: src/lib/registration/ui/addon_selection_base_dialog.rb:109 msgid "Select an extension or a module to show details here" msgstr "확장 또는 모듈을 선택하여 여기에 세부 사항을 표시하십시오." -#. checkbox label for an unavailable extension -#. (%s is an extension name) -#: src/lib/registration/ui/addon_selection_base_dialog.rb:122 +#. checkbox label for an unavailable extension +#. (%s is an extension name) +#: src/lib/registration/ui/addon_selection_base_dialog.rb:122 msgid "%s (not available)" msgstr "%s(사용할 수 없음)" -#. check if the count of addons requiring a reg. code fits two columns -#: src/lib/registration/ui/addon_selection_base_dialog.rb:261 +#. check if the count of addons requiring a reg. code fits two columns +#: src/lib/registration/ui/addon_selection_base_dialog.rb:261 msgid "YaST allows to select at most %s extensions or modules." msgstr "YaST에서는 최대 %s개의 확장 또는 모듈을 선택할 수 있습니다." -#. help text (2/3) -#: src/lib/registration/ui/addon_selection_base_dialog.rb:272 -msgid "" -"<p>Please note, that some extensions or modules might need specific " -"registration code.</p>" +#. help text (2/3) +#: src/lib/registration/ui/addon_selection_base_dialog.rb:272 +msgid "<p>Please note, that some extensions or modules might need specific registration code.</p>" msgstr "<p>일부 확장 또는 모듈은 특정 등록 코드가 필요할 수 있습니다.</p>" -#. help text (3/3) -#: src/lib/registration/ui/addon_selection_base_dialog.rb:275 -msgid "" -"<p>If you want to remove any extension or module you need to loginto the " -"SUSE Customer Center and remove them manually there.</p>" -msgstr "" -"<p>확장 또는 모듈을 제거하려면 SUSE 고객 센터에 로그인하여 수동으로 제거해야 " -"합니다.</p>" +#. help text (3/3) +#: src/lib/registration/ui/addon_selection_base_dialog.rb:275 +msgid "<p>If you want to remove any extension or module you need to loginto the SUSE Customer Center and remove them manually there.</p>" +msgstr "<p>확장 또는 모듈을 제거하려면 SUSE 고객 센터에 로그인하여 수동으로 제거해야 합니다.</p>" -#. dialog title -#: src/lib/registration/ui/addon_selection_registration_dialog.rb:31 +#. dialog title +#: src/lib/registration/ui/addon_selection_registration_dialog.rb:31 msgid "Extension and Module Selection" msgstr "확장 및 모듈 선택" -#. help text (1/3) -#: src/lib/registration/ui/addon_selection_registration_dialog.rb:34 -msgid "" -"<p>Here you can select available extensions and modules for yoursystem.</p>" -msgstr "" -"<p>여기에서 시스템에 사용 가능한 확장 및 모듈을 선택할 수 있습니다.</p>" +#. help text (1/3) +#: src/lib/registration/ui/addon_selection_registration_dialog.rb:34 +msgid "<p>Here you can select available extensions and modules for yoursystem.</p>" +msgstr "<p>여기에서 시스템에 사용 가능한 확장 및 모듈을 선택할 수 있습니다.</p>" -#. @return [String] the main dialog label -#: src/lib/registration/ui/addon_selection_registration_dialog.rb:50 +#. @return [String] the main dialog label +#: src/lib/registration/ui/addon_selection_registration_dialog.rb:50 msgid "Available Extensions and Modules" msgstr "사용 가능한 확장 및 모듈" -#. dialog title -#: src/lib/registration/ui/addon_selection_reregistration_dialog.rb:37 +#. dialog title +#: src/lib/registration/ui/addon_selection_reregistration_dialog.rb:37 msgid "Extension and Module Re-registration" msgstr "확장 기능 및 모듈 재등록" -#. help text (1/3) -#: src/lib/registration/ui/addon_selection_reregistration_dialog.rb:40 -msgid "" -"<p>Here you can select extensions and modules which will be registered again." -"</p>" +#. help text (1/3) +#: src/lib/registration/ui/addon_selection_reregistration_dialog.rb:40 +msgid "<p>Here you can select extensions and modules which will be registered again.</p>" msgstr "<p>여기서 다시 등록될 확장 기능과 모듈을 선택할 수 있습니다.</p>" -#. @return [String] the main dialog label -#: src/lib/registration/ui/addon_selection_reregistration_dialog.rb:54 +#. @return [String] the main dialog label +#: src/lib/registration/ui/addon_selection_reregistration_dialog.rb:54 msgid "Registered Extensions and Modules" msgstr "등록된 확장 기능 및 모듈" -#. help text -#: src/lib/registration/ui/autoyast_addon_dialog.rb:38 -msgid "" -"<p>Here you can select which extensions or moduleswill be registered " -"together with the base product.</p>" -msgstr "" -"<p>여기에서 기본 제품과 함께 등록할 확장 또는 모듈을 선택할 수 있습니다.</p>" +#. help text +#: src/lib/registration/ui/autoyast_addon_dialog.rb:38 +msgid "<p>Here you can select which extensions or moduleswill be registered together with the base product.</p>" +msgstr "<p>여기에서 기본 제품과 함께 등록할 확장 또는 모듈을 선택할 수 있습니다.</p>" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:41 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:41 msgid "Register Optional Extensions or Modules" msgstr "선택적 확장 또는 모듈 등록" -#. create the main dialog content -#. @return [Yast::Term] UI definition -#: src/lib/registration/ui/autoyast_addon_dialog.rb:57 +#. create the main dialog content +#. @return [Yast::Term] UI definition +#: src/lib/registration/ui/autoyast_addon_dialog.rb:57 msgid "Identifier" msgstr "식별자" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:58 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:58 msgid "Version" msgstr "버전" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:59 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:59 msgid "Architecture" msgstr "아키텍처" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:60 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:60 msgid "Release Type" msgstr "릴리스 유형" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:61 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:61 msgid "Registration Code" msgstr "등록 코드" -#. button label -#: src/lib/registration/ui/autoyast_addon_dialog.rb:72 +#. button label +#: src/lib/registration/ui/autoyast_addon_dialog.rb:72 msgid "Download Available Extensions..." msgstr "사용 가능한 확장 다운로드..." -#. remove the selected addon after user confirms the removal -#: src/lib/registration/ui/autoyast_addon_dialog.rb:136 +#. remove the selected addon after user confirms the removal +#: src/lib/registration/ui/autoyast_addon_dialog.rb:136 msgid "Really delete '%s'?" msgstr "'%s'을(를) 삭제하시겠습니까?" -#. dialog definition for adding/editing an addon -#. @return [Yast::Term] popup definition -#: src/lib/registration/ui/autoyast_addon_dialog.rb:184 +#. dialog definition for adding/editing an addon +#. @return [Yast::Term] popup definition +#: src/lib/registration/ui/autoyast_addon_dialog.rb:184 msgid "Extension or Module &Identifier" msgstr "확장 또는 모듈 식별자(&I)" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:185 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:185 msgid "&Version" msgstr "버전(&V)" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:186 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:186 msgid "&Architecture" msgstr "아키텍처(&A)" -#: src/lib/registration/ui/autoyast_addon_dialog.rb:187 +#: src/lib/registration/ui/autoyast_addon_dialog.rb:187 msgid "&Release Type" msgstr "릴리스 유형(&R)" -#. handle nil specifically, it cannot be stored in XML profile -#: src/lib/registration/ui/autoyast_addon_dialog.rb:190 -#: src/lib/registration/ui/autoyast_config_dialog.rb:108 -#: src/lib/registration/ui/base_system_registration_dialog.rb:266 +#. handle nil specifically, it cannot be stored in XML profile +#: src/lib/registration/ui/autoyast_addon_dialog.rb:190 +#: src/lib/registration/ui/autoyast_config_dialog.rb:108 +#: src/lib/registration/ui/base_system_registration_dialog.rb:266 msgid "Registration &Code" msgstr "등록 코드(&C)" -#: src/lib/registration/ui/autoyast_config_dialog.rb:57 +#: src/lib/registration/ui/autoyast_config_dialog.rb:57 msgid "" -"<p>Product registration includes your product in SUSE Customer Center " -"database,\n" +"<p>Product registration includes your product in SUSE Customer Center database,\n" "enabling you to get online updates and technical support.\n" -"To register while installing automatically, select <b>Run Product " -"Registration</b>.</p>" +"To register while installing automatically, select <b>Run Product Registration</b>.</p>" msgstr "" "<p>제품 등록은 SUSE 고객 센터 데이터베이스에 제품을 포함하여\n" "온라인 업데이트 및 기술 지원을 받을 수 있게 합니다.\n" "자동으로 설치하는 동안 등록하려면 <b>제품 등록 실행</b>을 선택하십시오.</p>" -#: src/lib/registration/ui/autoyast_config_dialog.rb:63 +#: src/lib/registration/ui/autoyast_config_dialog.rb:63 msgid "" -"<p>If your network deploys a custom registration server, set the correct URL " -"of the server\n" -"and the location of the SMT certificate in <b>SMT Server Settings</b>. " -"Refer\n" +"<p>If your network deploys a custom registration server, set the correct URL of the server\n" +"and the location of the SMT certificate in <b>SMT Server Settings</b>. Refer\n" "to your SMT manual for further assistance.</p>" msgstr "" -"<p>네트워크에서 사용자 정의 등록 서버를 배포하는 경우 <b>SMT 서버 설정</b>에" -"서 서버의 올바른 URL 및\n" +"<p>네트워크에서 사용자 정의 등록 서버를 배포하는 경우 <b>SMT 서버 설정</b>에서 서버의 올바른 URL 및\n" "SMT 인증서를 설정하십시오. 추가 지원을 받으려면\n" "SMT 매뉴얼을 참조하십시오.</p>" -#. the UI defition for the global registration status -#. @return [Yast::Term] UI term -#: src/lib/registration/ui/autoyast_config_dialog.rb:93 +#. the UI defition for the global registration status +#. @return [Yast::Term] UI term +#: src/lib/registration/ui/autoyast_config_dialog.rb:93 msgid "Register the Product" msgstr "제품 등록" -#: src/lib/registration/ui/autoyast_config_dialog.rb:106 -#: src/lib/registration/ui/base_system_registration_dialog.rb:263 +#: src/lib/registration/ui/autoyast_config_dialog.rb:106 +#: src/lib/registration/ui/base_system_registration_dialog.rb:263 msgid "&E-mail Address" msgstr "전자 메일 주소(&E)" -#: src/lib/registration/ui/autoyast_config_dialog.rb:112 +#: src/lib/registration/ui/autoyast_config_dialog.rb:112 msgid "Install Available Updates from Update Repositories" msgstr "업데이트 리포지토리에서 사용 가능한 업데이트 설치" -#. Translators: Text for UI Label - capitalized -#: src/lib/registration/ui/autoyast_config_dialog.rb:127 +#. Translators: Text for UI Label - capitalized +#: src/lib/registration/ui/autoyast_config_dialog.rb:127 msgid "Server Settings" msgstr "서버 설정" -#: src/lib/registration/ui/autoyast_config_dialog.rb:131 +#: src/lib/registration/ui/autoyast_config_dialog.rb:131 msgid "Find Registration Server Using SLP Discovery" msgstr "SLP 검색을 사용하여 등록 서버 찾기" -#. Translators: Text for UI Label - capitalized -#: src/lib/registration/ui/autoyast_config_dialog.rb:136 +#. Translators: Text for UI Label - capitalized +#: src/lib/registration/ui/autoyast_config_dialog.rb:136 msgid "Use Specific Server URL Instead of the Default" msgstr "기본값 대신 특정 서버 URL 사용" -#. Translators: Text for UI Label - capitalized -#: src/lib/registration/ui/autoyast_config_dialog.rb:143 +#. Translators: Text for UI Label - capitalized +#: src/lib/registration/ui/autoyast_config_dialog.rb:143 msgid "Optional SSL Server Certificate URL" msgstr "선택적 SSL 서버 인증서 URL" -#. Translators: Text for UI Label - capitalized -#: src/lib/registration/ui/autoyast_config_dialog.rb:152 +#. Translators: Text for UI Label - capitalized +#: src/lib/registration/ui/autoyast_config_dialog.rb:152 msgid "Optional SSL Server Certificate Fingerprint" msgstr "선택적 SSL 서버 인증서 지문" -#: src/lib/registration/ui/autoyast_config_dialog.rb:154 +#: src/lib/registration/ui/autoyast_config_dialog.rb:154 msgid "none" msgstr "none" -#. Translators: Text for UI Label - capitalized -#: src/lib/registration/ui/autoyast_config_dialog.rb:165 +#. Translators: Text for UI Label - capitalized +#: src/lib/registration/ui/autoyast_config_dialog.rb:165 msgid "SSL Certificate Fingerprint" msgstr "SSL 인증서 지문" -#. the UI defition for the main dialog -#. @return [Yast::Term] UI term -#: src/lib/registration/ui/autoyast_config_dialog.rb:187 +#. the UI defition for the main dialog +#. @return [Yast::Term] UI term +#: src/lib/registration/ui/autoyast_config_dialog.rb:187 msgid "Register Extensions or Modules..." msgstr "확장 또는 모듈 등록..." -#. TRANSLATORS: radio button; %s is a host name. -#: src/lib/registration/ui/base_system_registration_dialog.rb:254 +#. TRANSLATORS: radio button; %s is a host name. +#: src/lib/registration/ui/base_system_registration_dialog.rb:254 msgid "Register System via %s" msgstr "%s을(를) 통해 시스템 등록" -#. TRANSLATORS: radio button -#: src/lib/registration/ui/base_system_registration_dialog.rb:297 +#. TRANSLATORS: radio button +#: src/lib/registration/ui/base_system_registration_dialog.rb:297 msgid "Register System via local SMT Server" msgstr "로컬 SMT 서버를 통해 시스템 등록" -#: src/lib/registration/ui/base_system_registration_dialog.rb:308 +#: src/lib/registration/ui/base_system_registration_dialog.rb:308 msgid "&Local Registration Server URL" msgstr "로컬 등록 서버 URL(&L)" -#: src/lib/registration/ui/base_system_registration_dialog.rb:322 +#: src/lib/registration/ui/base_system_registration_dialog.rb:322 msgid "&Skip Registration" msgstr "등록 건너뛰기(&S)" -#. display the addon re-registration button only in registered installed system -#: src/lib/registration/ui/base_system_registration_dialog.rb:334 +#. display the addon re-registration button only in registered installed system +#: src/lib/registration/ui/base_system_registration_dialog.rb:334 msgid "&Register Extensions or Modules Again" msgstr "확장 기능 및 모듈 다시 등록(&R)" -#. part of the main dialog definition - the base product details -#. @return [Yast::Term] UI term -#. the main dialog content -#. @return [Yast::Term] UI term -#: src/lib/registration/ui/base_system_registration_dialog.rb:342 -#: src/lib/registration/ui/registered_system_dialog.rb:67 +#. part of the main dialog definition - the base product details +#. @return [Yast::Term] UI term +#. the main dialog content +#. @return [Yast::Term] UI term +#: src/lib/registration/ui/base_system_registration_dialog.rb:342 +#: src/lib/registration/ui/registered_system_dialog.rb:67 msgid "The system is already registered." msgstr "시스템이 이미 등록되었습니다." -#: src/lib/registration/ui/base_system_registration_dialog.rb:344 +#: src/lib/registration/ui/base_system_registration_dialog.rb:344 msgid "Please select your preferred method of registration." msgstr "선호하는 등록 수단을 선택하십시오." -#. help text -#: src/lib/registration/ui/base_system_registration_dialog.rb:360 -msgid "" -"Enter SUSE Customer Center credentials here to register the system to get " -"updates and extensions." -msgstr "" -"업데이트 및 확장을 가져오려면 여기에 SUSE 고객 센터 인증서를 입력하여 시스템" -"을 등록하십시오." +#. help text +#: src/lib/registration/ui/base_system_registration_dialog.rb:360 +msgid "Enter SUSE Customer Center credentials here to register the system to get updates and extensions." +msgstr "업데이트 및 확장을 가져오려면 여기에 SUSE 고객 센터 인증서를 입력하여 시스템을 등록하십시오." -#. Popup question: confirm skipping the registration -#: src/lib/registration/ui/base_system_registration_dialog.rb:369 +#. Popup question: confirm skipping the registration +#: src/lib/registration/ui/base_system_registration_dialog.rb:369 msgid "" "If you do not register your system we will not be able\n" "to grant you access to the update repositories.\n" @@ -879,86 +850,66 @@ "설치 후 등록하거나\n" "고객 센터를 방문하여 온라인으로 등록할 수 있습니다." -#. UI term for the network configuration button (or empty if not needed) -#. @return [Yast::Term] UI term -#: src/lib/registration/ui/base_system_registration_dialog.rb:381 +#. UI term for the network configuration button (or empty if not needed) +#. @return [Yast::Term] UI term +#: src/lib/registration/ui/base_system_registration_dialog.rb:381 msgid "Net&work Configuration..." msgstr "네트워크 구성(&W)..." -#. SSL error message -#: src/lib/registration/ui/import_certificate_dialog.rb:23 +#. SSL error message +#: src/lib/registration/ui/import_certificate_dialog.rb:23 msgid "Certificate has expired" msgstr "인증서가 만료되었습니다." -#. SSL error message -#: src/lib/registration/ui/import_certificate_dialog.rb:25 +#. SSL error message +#: src/lib/registration/ui/import_certificate_dialog.rb:25 msgid "Self signed certificate" msgstr "자체 서명된 인증서" -#. SSL error message -#: src/lib/registration/ui/import_certificate_dialog.rb:27 +#. SSL error message +#: src/lib/registration/ui/import_certificate_dialog.rb:27 msgid "Self signed certificate in certificate chain" msgstr "인증서 체인의 자체 서명된 인증서" -#. push button -#: src/lib/registration/ui/import_certificate_dialog.rb:74 +#. push button +#: src/lib/registration/ui/import_certificate_dialog.rb:74 msgid "&Trust and Import" msgstr "트러스트 및 임포트(&T)" -#. help text (RichText) for importing a SSL certificate (1/5) -#: src/lib/registration/ui/import_certificate_dialog.rb:122 -msgid "" -"<p>Secure connections (e.g. HTTPS) use SSL certificates for verifying the " -"authenticity of the server and encrypting the data being transferred.</p>" -msgstr "" -"<p>보안 연결(예: HTTPS)은 SSL 인증서를 사용하여 서버의 신뢰성을 확인하고 전송" -"된 데이터를 암호화합니다.</p>" +#. help text (RichText) for importing a SSL certificate (1/5) +#: src/lib/registration/ui/import_certificate_dialog.rb:122 +msgid "<p>Secure connections (e.g. HTTPS) use SSL certificates for verifying the authenticity of the server and encrypting the data being transferred.</p>" +msgstr "<p>보안 연결(예: HTTPS)은 SSL 인증서를 사용하여 서버의 신뢰성을 확인하고 전송된 데이터를 암호화합니다.</p>" -#. help text (RichText) for importing a SSL certificate (2/5) -#: src/lib/registration/ui/import_certificate_dialog.rb:127 -msgid "" -"<p>You can choose to import the certificate into the list of known " -"certificate authorities (CA), meaning that you trust the subject and the " -"issuer of the unknown certificate.</p>" -msgstr "" -"<p>알려진 CA(인증 기관) 목록으로 인증서를 임포트하여 알 수 없는 인증서의 주체" -"와 발급자를 신뢰할 수 있습니다.</p>" +#. help text (RichText) for importing a SSL certificate (2/5) +#: src/lib/registration/ui/import_certificate_dialog.rb:127 +msgid "<p>You can choose to import the certificate into the list of known certificate authorities (CA), meaning that you trust the subject and the issuer of the unknown certificate.</p>" +msgstr "<p>알려진 CA(인증 기관) 목록으로 인증서를 임포트하여 알 수 없는 인증서의 주체와 발급자를 신뢰할 수 있습니다.</p>" -#. help text (RichText) for importing a SSL certificate (3/5) -#: src/lib/registration/ui/import_certificate_dialog.rb:132 -msgid "" -"<p>Importing a certificate will, for example, allow you to use a self-signed " -"certificate.</p>" -msgstr "" -"<p>예를 들어, 인증서를 임포트하면 자체 서명된 인증서를 사용할 수 있습니다." +#. help text (RichText) for importing a SSL certificate (3/5) +#: src/lib/registration/ui/import_certificate_dialog.rb:132 +msgid "<p>Importing a certificate will, for example, allow you to use a self-signed certificate.</p>" +msgstr "<p>예를 들어, 인증서를 임포트하면 자체 서명된 인증서를 사용할 수 있습니다.</p>" -#. help text (RichText) for importing a SSL certificate (4/5) -#: src/lib/registration/ui/import_certificate_dialog.rb:136 -msgid "" -"<p><b>Important:</b> You should always verify the fingerprints of " -"certificates you import to ensure they are genuine.</p>" -msgstr "" -"<p><b>중요:</b>항상 임포트한 인증서 지문을 확인하여 인증서가 정품인지 확인해" -"야 합니다.</p>" +#. help text (RichText) for importing a SSL certificate (4/5) +#: src/lib/registration/ui/import_certificate_dialog.rb:136 +msgid "<p><b>Important:</b> You should always verify the fingerprints of certificates you import to ensure they are genuine.</p>" +msgstr "<p><b>중요:</b>항상 임포트한 인증서 지문을 확인하여 인증서가 정품인지 확인해야 합니다.</p>" -#. help text (RichText) for importing a SSL certificate (5/5) -#: src/lib/registration/ui/import_certificate_dialog.rb:140 -msgid "" -"<p><b>Importing an unknown certificate without verification is a big " -"security risk.</b></p>" -msgstr "" -"<p><b>확인하지 않고 알 수 없는 인증서를 임포트하면 보안상 위험합니다.</b></p>" +#. help text (RichText) for importing a SSL certificate (5/5) +#: src/lib/registration/ui/import_certificate_dialog.rb:140 +msgid "<p><b>Importing an unknown certificate without verification is a big security risk.</b></p>" +msgstr "<p><b>확인하지 않고 알 수 없는 인증서를 임포트하면 보안상 위험합니다.</b></p>" -#. TRANSLATORS: error message, %s are details -#. TRANSLATORS: error message, %s are details -#: src/lib/registration/ui/media_addon_workflow.rb:95 -#: src/lib/registration/ui/wizard_client.rb:57 +#. TRANSLATORS: error message, %s are details +#. TRANSLATORS: error message, %s are details +#: src/lib/registration/ui/media_addon_workflow.rb:95 +#: src/lib/registration/ui/wizard_client.rb:57 msgid "Internal error: %s" msgstr "내부 오류: %s" -#. register the base system if not already registered -#: src/lib/registration/ui/media_addon_workflow.rb:132 +#. register the base system if not already registered +#: src/lib/registration/ui/media_addon_workflow.rb:132 msgid "" "The base system has to be registered in order to register the '%s' add-on.\n" "Skip the base system and the add-on registration?" @@ -966,46 +917,40 @@ "'%s' 추가 기능을 등록하려면 기본 시스템을 등록해야 합니다.\n" "기본 시스템 추가 기능 등록을 건너뛰시겠습니까?" -#. TRANSLATORS: dialog title -#: src/lib/registration/ui/migration_repos_selection_dialog.rb:47 +#. TRANSLATORS: dialog title +#: src/lib/registration/ui/migration_repos_selection_dialog.rb:47 msgid "Repositories used for Migration" msgstr "마이그레이션에 사용되는 리포지토리" -#. TRANSLATORS: help text -#: src/lib/registration/ui/migration_repos_selection_dialog.rb:50 -msgid "" -"<p>In this dialog you can manually select which repositories willbe used for " -"online migration. The packages will be upgraded to thehighest version found " -"in the selected repositories.</p>" -msgstr "" -"<p>이 대화 상자에서는 온라인 마이그레이션에 사용될 리포지토리를 수동으로 선택" -"할 수 있습니다. 패키지가 선택된 리포지토리에서 발견된 최고 버전으로 업그레이" -"드됩니다.</p>" +#. TRANSLATORS: help text +#: src/lib/registration/ui/migration_repos_selection_dialog.rb:50 +msgid "<p>In this dialog you can manually select which repositories willbe used for online migration. The packages will be upgraded to thehighest version found in the selected repositories.</p>" +msgstr "<p>이 대화 상자에서는 온라인 마이그레이션에 사용될 리포지토리를 수동으로 선택할 수 있습니다. 패키지가 선택된 리포지토리에서 발견된 최고 버전으로 업그레이드됩니다.</p>" -#. TRANSLATORS: Multiselection widget label -#: src/lib/registration/ui/migration_repos_selection_dialog.rb:85 +#. TRANSLATORS: Multiselection widget label +#: src/lib/registration/ui/migration_repos_selection_dialog.rb:85 msgid "Select the Repositories used for Migration" msgstr "마이그레이션에 사용되는 리포지토리 선택" -#. TRANSLATORS: Push button label, starts the repository management module -#: src/lib/registration/ui/migration_repos_selection_dialog.rb:88 +#. TRANSLATORS: Push button label, starts the repository management module +#: src/lib/registration/ui/migration_repos_selection_dialog.rb:88 msgid "Manage Repositories..." msgstr "리포지토리 관리..." -#. TRANSLATORS: summary text, %s is a repository URL -#: src/lib/registration/ui/migration_repos_selection_dialog.rb:113 +#. TRANSLATORS: summary text, %s is a repository URL +#: src/lib/registration/ui/migration_repos_selection_dialog.rb:113 msgid "URL: %s" msgstr "URL: %s" -#. TRANSLATORS: summary text, %s is a repository priority (1-99) -#: src/lib/registration/ui/migration_repos_selection_dialog.rb:115 +#. TRANSLATORS: summary text, %s is a repository priority (1-99) +#: src/lib/registration/ui/migration_repos_selection_dialog.rb:115 msgid "Priority: %s" msgstr "중요도: %s" -#. TRANSLATORS: a popup message with [Continue] [Cancel] buttons, -#. pressing [Continue] starts the registration module, [Cancel] aborts -#. the online migration -#: src/lib/registration/ui/migration_repos_workflow.rb:145 +#. TRANSLATORS: a popup message with [Continue] [Cancel] buttons, +#. pressing [Continue] starts the registration module, [Cancel] aborts +#. the online migration +#: src/lib/registration/ui/migration_repos_workflow.rb:145 msgid "" "The system is not registered,\n" "to run the online migration you need\n" @@ -1015,115 +960,103 @@ "온라인 마이그레이션을 실행하려면\n" "먼저 시스템을 등록해야 합니다." -#. TRANSLATORS: Error message -#: src/lib/registration/ui/migration_repos_workflow.rb:183 +#. TRANSLATORS: Error message +#: src/lib/registration/ui/migration_repos_workflow.rb:183 msgid "No installed product found." msgstr "설치된 제품을 찾을 수 없습니다." -#. TRANSLATORS: Error message -#: src/lib/registration/ui/migration_repos_workflow.rb:212 +#. TRANSLATORS: Error message +#: src/lib/registration/ui/migration_repos_workflow.rb:212 msgid "No migration product found." msgstr "마이그레이션 제품을 찾을 수 없습니다." -#. TRANSLATORS: progress message -#: src/lib/registration/ui/migration_repos_workflow.rb:289 +#. TRANSLATORS: progress message +#: src/lib/registration/ui/migration_repos_workflow.rb:289 msgid "Preparing Migration Repositories..." msgstr "마이그레이션 리포지토리 준비 중..." -#. TRANSLATORS: dialog title -#: src/lib/registration/ui/migration_selection_dialog.rb:62 +#. TRANSLATORS: dialog title +#: src/lib/registration/ui/migration_selection_dialog.rb:62 msgid "Select the Migration Target" msgstr "마이그레이션 대상 선택" -#. TRANSLATORS: help text (1/3) -#: src/lib/registration/ui/migration_selection_dialog.rb:65 -msgid "" -"<p>Here you can select the migration target products. The registrationserver " -"may offer several possible migration to new products.</p>" -msgstr "" -"<p>여기에서 마이그레이션 대상 제품을 선택할 수 있습니다. 등록 서버는 새로운 " -"제품에 대해 몇 가지 마이그레이션 방법을 제공할 수 있습니다.</p>" +#. TRANSLATORS: help text (1/3) +#: src/lib/registration/ui/migration_selection_dialog.rb:65 +msgid "<p>Here you can select the migration target products. The registrationserver may offer several possible migration to new products.</p>" +msgstr "<p>여기에서 마이그레이션 대상 제품을 선택할 수 있습니다. 등록 서버는 새로운 제품에 대해 몇 가지 마이그레이션 방법을 제공할 수 있습니다.</p>" -#. TRANSLATORS: help text (2/3) -#: src/lib/registration/ui/migration_selection_dialog.rb:68 +#. TRANSLATORS: help text (2/3) +#: src/lib/registration/ui/migration_selection_dialog.rb:68 msgid "<p>Only one migration target from the list can be selected.</p>" msgstr "<p>목록에서 하나의 마이그레이션 대상만 선택할 수 있습니다.</p>" -#. TRANSLATORS: help text (3/3), %s is replaced by the (translated) check box label -#: src/lib/registration/ui/migration_selection_dialog.rb:70 -msgid "" -"<p>Use the <b>%s</b> check box to manually select the migration repositories " -"later.</p>" -msgstr "" -"<p><b>%s</b> 확인란을 사용하여 마이그레이션 리포지토리를 나중에 수동으로 선택" -"하십시오.</p>" +#. TRANSLATORS: help text (3/3), %s is replaced by the (translated) check box label +#: src/lib/registration/ui/migration_selection_dialog.rb:70 +msgid "<p>Use the <b>%s</b> check box to manually select the migration repositories later.</p>" +msgstr "<p><b>%s</b> 확인란을 사용하여 마이그레이션 리포지토리를 나중에 수동으로 선택하십시오.</p>" -#: src/lib/registration/ui/migration_selection_dialog.rb:71 +#: src/lib/registration/ui/migration_selection_dialog.rb:71 msgid "Manually Select Migration Repositories" msgstr "마이그레이션 리포지토리 수동으로 선택" -#. TRANSLATORS: error popup, no target migration is selected -#: src/lib/registration/ui/migration_selection_dialog.rb:97 +#. TRANSLATORS: error popup, no target migration is selected +#: src/lib/registration/ui/migration_selection_dialog.rb:97 msgid "Select the target migration." msgstr "대상 마이그레이션을 선택하십시오." -#. TRANSLATORS: check button label -#: src/lib/registration/ui/migration_selection_dialog.rb:137 +#. TRANSLATORS: check button label +#: src/lib/registration/ui/migration_selection_dialog.rb:137 msgid "Manually Adjust the Repositories for Migration" msgstr "마이그레이션용 리포지토리 수동 조정" -#. TRANSLATORS: selection box label -#: src/lib/registration/ui/migration_selection_dialog.rb:152 +#. TRANSLATORS: selection box label +#: src/lib/registration/ui/migration_selection_dialog.rb:152 msgid "Possible Migration Targets" msgstr "가능한 마이그레이션 대상" -#. TRANSLATORS: RichText header (details for the selected item) -#: src/lib/registration/ui/migration_selection_dialog.rb:189 +#. TRANSLATORS: RichText header (details for the selected item) +#: src/lib/registration/ui/migration_selection_dialog.rb:189 msgid "Migration Summary" msgstr "마이그레이션 요약" -#. TRANSLATORS: An error message displayed in the migration details. -#. The product has not been mirrored to the SMT server and cannot be used -#. for migration. The SMT admin has to mirror the product to allow -#. using the selected migration. -#. %{url} is the URL of the registration server (SMT) -#. %{product} is a full product name, e.g. "SUSE Linux Enterprise Server 12" -#: src/lib/registration/ui/migration_selection_dialog.rb:212 -msgid "" -"ERROR: Product <b>%{product}</b> is not available at the registration server " -"(%{url}). Make the product available to allow using this migration." -msgstr "" -"오류: <b>%{product}</b> 제품을 등록 서버(%{url})에서 사용할 수 없습니다. 이 " -"마이그레이션의 사용을 허용하려면 제품을 사용할 수 있게 하십시오." +#. TRANSLATORS: An error message displayed in the migration details. +#. The product has not been mirrored to the SMT server and cannot be used +#. for migration. The SMT admin has to mirror the product to allow +#. using the selected migration. +#. %{url} is the URL of the registration server (SMT) +#. %{product} is a full product name, e.g. "SUSE Linux Enterprise Server 12" +#: src/lib/registration/ui/migration_selection_dialog.rb:212 +msgid "ERROR: Product <b>%{product}</b> is not available at the registration server (%{url}). Make the product available to allow using this migration." +msgstr "오류: <b>%{product}</b> 제품을 등록 서버(%{url})에서 사용할 수 없습니다. 이 마이그레이션의 사용을 허용하려면 제품을 사용할 수 있게 하십시오." -#. this is rather a theoretical case, but anyway.... -#. TRANSLATORS: Summary message, rich text format -#. %s is a product name, e.g. "SUSE Linux Enterprise Server 12 SP1 x86_64" -#: src/lib/registration/ui/migration_selection_dialog.rb:224 +#. this is rather a theoretical case, but anyway.... +#. TRANSLATORS: Summary message, rich text format +#. %s is a product name, e.g. "SUSE Linux Enterprise Server 12 SP1 x86_64" +#: src/lib/registration/ui/migration_selection_dialog.rb:224 msgid "%s <b>will be installed.</b>" msgstr "%s이(가) <b>설치됩니다.</b>" -#. TRANSLATORS: Summary message, rich text format -#. %s is a product name, e.g. "SUSE Linux Enterprise Server 12" -#: src/lib/registration/ui/migration_selection_dialog.rb:241 +#. TRANSLATORS: Summary message, rich text format +#. %s is a product name, e.g. "SUSE Linux Enterprise Server 12" +#: src/lib/registration/ui/migration_selection_dialog.rb:241 msgid "%s <b>stays unchanged.</b>" msgstr "%s이(가) <b>그대로 유지됩니다.</b>" -#. TRANSLATORS: Summary message, rich text format -#. %{old_product} is a product name, e.g. "SUSE Linux Enterprise Server 12" -#. %{new_product} is a product name, e.g. "SUSE Linux Enterprise Server 12 SP1 x86_64" -#: src/lib/registration/ui/migration_selection_dialog.rb:251 +#. TRANSLATORS: Summary message, rich text format +#. %{old_product} is a product name, e.g. "SUSE Linux Enterprise Server 12" +#. %{new_product} is a product name, e.g. "SUSE Linux Enterprise Server 12 SP1 x86_64" +#: src/lib/registration/ui/migration_selection_dialog.rb:251 msgid "%{old_product} <b>will be upgraded to</b> %{new_product}." msgstr "%{old_product}이(가) %{new_product}(으)로 <b>업그레이드</b>됩니다." -#. TRANSLATORS: Summary message, rich text format -#. %{old_product} and %{new_product} are product names -#: src/lib/registration/ui/migration_selection_dialog.rb:256 +#. TRANSLATORS: Summary message, rich text format +#. %{old_product} and %{new_product} are product names +#: src/lib/registration/ui/migration_selection_dialog.rb:256 msgid "%{old_product} <b>will be downgraded to</b> %{new_product}." msgstr "%{old_product}이(가) %{new_product}(으)로 <b>다운그레이드</b>됩니다." -#. TRANSLATORS: an error popup message -#: src/lib/registration/ui/migration_selection_dialog.rb:289 +#. TRANSLATORS: an error popup message +#: src/lib/registration/ui/migration_selection_dialog.rb:289 msgid "" "The selected migration contains a product\n" "which is not available at the registration server.\n" @@ -1138,47 +1071,39 @@ "누락된 제품을 등록 \n" "서버에서 사용할 수 있도록 하십시오." -#. help text -#: src/lib/registration/ui/registered_system_dialog.rb:40 +#. help text +#: src/lib/registration/ui/registered_system_dialog.rb:40 msgid "<p>The system is already registered.</p>" msgstr "<p>시스템이 이미 등록되어 있습니다.</p>" -#: src/lib/registration/ui/registered_system_dialog.rb:41 -msgid "" -"<p>You can re-register it again or you can register additional extension or " -"modules to enhance the functionality of the system.</p>" -msgstr "" -"<p>다시 등록하거나 시스템 기능 향상을 위해 추가 확장 또는 모듈을 등록할 수 있" -"습니다.</p>" +#: src/lib/registration/ui/registered_system_dialog.rb:41 +msgid "<p>You can re-register it again or you can register additional extension or modules to enhance the functionality of the system.</p>" +msgstr "<p>다시 등록하거나 시스템 기능 향상을 위해 추가 확장 또는 모듈을 등록할 수 있습니다.</p>" -#: src/lib/registration/ui/registered_system_dialog.rb:43 -msgid "" -"<p>If you want to deregister your system you need to log into the SUSE " -"Customer Center and remove the system manually there.</p>" -msgstr "" -"<p>시스템을 등록하려면 SUSE 고객 센터에 로그인하여 시스템을 수동으로 제거해" -"야 합니다.</p>" +#: src/lib/registration/ui/registered_system_dialog.rb:43 +msgid "<p>If you want to deregister your system you need to log into the SUSE Customer Center and remove the system manually there.</p>" +msgstr "<p>시스템을 등록하려면 SUSE 고객 센터에 로그인하여 시스템을 수동으로 제거해야 합니다.</p>" -#. button label -#: src/lib/registration/ui/registered_system_dialog.rb:70 +#. button label +#: src/lib/registration/ui/registered_system_dialog.rb:70 msgid "Select Extensions" msgstr "확장 선택" -#. button label -#: src/lib/registration/ui/registered_system_dialog.rb:73 +#. button label +#: src/lib/registration/ui/registered_system_dialog.rb:73 msgid "Register Again" msgstr "다시 등록" -#: src/lib/registration/ui/registration_update_dialog.rb:42 +#: src/lib/registration/ui/registration_update_dialog.rb:42 msgid "Registration is being updated..." msgstr "등록 업데이트 중..." -#: src/lib/registration/ui/registration_update_dialog.rb:43 +#: src/lib/registration/ui/registration_update_dialog.rb:43 msgid "The previous registration is being updated." msgstr "이전 등록을 업데이트하고 있습니다." -#. automatic registration refresh during system upgrade failed, register from scratch -#: src/lib/registration/ui/registration_update_dialog.rb:65 +#. automatic registration refresh during system upgrade failed, register from scratch +#: src/lib/registration/ui/registration_update_dialog.rb:65 msgid "" "Automatic registration upgrade failed.\n" "You can manually register the system from scratch." @@ -1186,18 +1111,18 @@ "자동 등록 업그레이드에 실패했습니다.\n" "처음부터 수동으로 시스템을 등록할 수 있습니다." -#. Constructor -#. -#. @param services [ArrayYast::SlpServiceClass::Service] -#: src/lib/registration/url_helpers.rb:220 +#. @return [ArrayYast::SlpServiceClass::Service] +#: src/lib/registration/url_helpers.rb:220 msgid "Searching..." msgstr "검색 중..." -#: src/lib/registration/url_helpers.rb:220 +#: src/lib/registration/url_helpers.rb:220 msgid "Looking up local registration servers..." msgstr "로컬 등록 서버를 조회하는 중입니다." -#. Constructor -#. -#. @param services [ArraySlpServiceClass::Service] list of services to show -#. @param heading [String] Dialog's heading. If nil (or not specified), a default -#. heading will be used). -#. @param description [String] Dialog's description (to be shown on top of the list). -#. If nil (or not specified) a default description will be used. -#. @param no_selected_msg [String] Message to be shown when no service was selected -#. If nil (or not specified) a default description will be used. -#. @param initial [SlpServiceClass::Service] initially selected service. If nil -#. (or not specified) the first service will be used. -#: src/lib/slp/dialogs/service_selection.rb:78 +#. Constructor +#. +#. @param services [ArraySlpServiceClass::Service] list of services to show +#. @param heading [String] Dialog's heading. If nil (or not specified), a default +#. heading will be used). +#. @param description [String] Dialog's description (to be shown on top of the list). +#. If nil (or not specified) a default description will be used. +#. @param no_selected_msg [String] Message to be shown when no service was selected +#. If nil (or not specified) a default description will be used. +#. @param initial [SlpServiceClass::Service] initially selected service. If nil +#. (or not specified) the first service will be used. +#: src/lib/slp/dialogs/service_selection.rb:78 msgid "Service selection" msgstr "서비스 선택" -#: src/lib/slp/dialogs/service_selection.rb:79 +#: src/lib/slp/dialogs/service_selection.rb:79 msgid "Select a detected service from the list." msgstr "목록에서 감지된 서비스를 선택하십시오." -#: src/lib/slp/dialogs/service_selection.rb:80 +#: src/lib/slp/dialogs/service_selection.rb:80 msgid "No service was selected." msgstr "선택한 서비스가 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/reipl.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/reipl.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/reipl.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,15 +14,15 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xreipl module -#: src/clients/reipl.rb:53 +#. Command line help text for the Xreipl module +#: src/clients/reipl.rb:53 msgid "Configuration of reipl" msgstr "Reipl 구성" -#. TRANSLATORS: part of a shutdown message -#. %1 is replaced with a device name -#. Newline at the end is required -#: src/clients/reipl_bootloader_finish.rb:69 +#. TRANSLATORS: part of a shutdown message +#. %1 is replaced with a device name +#. Newline at the end is required +#: src/clients/reipl_bootloader_finish.rb:69 msgid "" "\n" "After shutdown, reload the system\n" @@ -32,12 +32,12 @@ "종료 후에 장치 '%1'에서 IPL을 사용하여\n" "시스템을 다시 로드합니다.\n" -#. TRANSLATORS: part of a shutdown message -#. %1 is replaced with a FCP name -#. %2 is replaced with a WWPN name -#. %3 is replaced with a LUN name -#. Newline at the end is required -#: src/clients/reipl_bootloader_finish.rb:88 +#. TRANSLATORS: part of a shutdown message +#. %1 is replaced with a FCP name +#. %2 is replaced with a WWPN name +#. %3 is replaced with a LUN name +#. Newline at the end is required +#: src/clients/reipl_bootloader_finish.rb:88 msgid "" "\n" "After shutdown, reload the system\n" @@ -51,7 +51,7 @@ "및 LUN '%3' 포함)에서 IPL을 사용하여 \n" "시스템을 다시 로드합니다.\n" -#: src/clients/reipl_bootloader_finish.rb:102 +#: src/clients/reipl_bootloader_finish.rb:102 msgid "" "\n" "After shutdown, reload the system \n" @@ -63,89 +63,89 @@ "장치로부터 IPL과 함께\n" "시스템을 다시 불러옵니다." -#. Rich text title for Reipl in proposals -#: src/clients/reipl_proposal.rb:81 +#. Rich text title for Reipl in proposals +#: src/clients/reipl_proposal.rb:81 msgid "Reipl" msgstr "Reipl" -#. Menu title for Reipl in proposals -#: src/clients/reipl_proposal.rb:85 +#. Menu title for Reipl in proposals +#: src/clients/reipl_proposal.rb:85 msgid "&Reipl" msgstr "Reipl(&R)" -#. Reipl configure dialog caption -#. Initialization dialog caption -#: src/include/reipl/dialogs.rb:59 src/include/reipl/wizards.rb:100 +#. Reipl configure dialog caption +#. Initialization dialog caption +#: src/include/reipl/dialogs.rb:59 src/include/reipl/wizards.rb:100 msgid "Reipl Configuration" msgstr "Reipl 구성" -#. Reipl configure dialog contents -#: src/include/reipl/dialogs.rb:63 +#. Reipl configure dialog contents +#: src/include/reipl/dialogs.rb:63 msgid "reipl methods" msgstr "reipl 메소드" -#: src/include/reipl/dialogs.rb:72 +#: src/include/reipl/dialogs.rb:72 msgid "&ccw" msgstr "ccw(&C)" -#: src/include/reipl/dialogs.rb:79 +#: src/include/reipl/dialogs.rb:79 msgid "&fcp" msgstr "fcp(&F)" -#: src/include/reipl/dialogs.rb:86 +#: src/include/reipl/dialogs.rb:86 msgid "&nss" msgstr "nss(&N)" -#: src/include/reipl/dialogs.rb:98 +#: src/include/reipl/dialogs.rb:98 msgid "ccw parameters" msgstr "ccw 파라미터" -#: src/include/reipl/dialogs.rb:103 +#: src/include/reipl/dialogs.rb:103 msgid "&Device" msgstr "장치(&D)" -#: src/include/reipl/dialogs.rb:109 +#: src/include/reipl/dialogs.rb:109 msgid "&Loadparm" msgstr "Loadparm(&L)" -#: src/include/reipl/dialogs.rb:118 +#: src/include/reipl/dialogs.rb:118 msgid "fcp parameters" msgstr "fcp 파라미터" -#: src/include/reipl/dialogs.rb:123 +#: src/include/reipl/dialogs.rb:123 msgid "D&evice" msgstr "장치(&E)" -#: src/include/reipl/dialogs.rb:129 +#: src/include/reipl/dialogs.rb:129 msgid "&Worldwide port number" msgstr "전 세계 포트 번호(&W)" -#: src/include/reipl/dialogs.rb:135 +#: src/include/reipl/dialogs.rb:135 msgid "Lo&gical unit number" msgstr "논리적 단위 번호(&G)" -#: src/include/reipl/dialogs.rb:141 +#: src/include/reipl/dialogs.rb:141 msgid "B&oot program selector" msgstr "부팅 프로그램 선택기(&O)" -#: src/include/reipl/dialogs.rb:150 +#: src/include/reipl/dialogs.rb:150 msgid "nss parameters" msgstr "nss 파라미터" -#: src/include/reipl/dialogs.rb:155 +#: src/include/reipl/dialogs.rb:155 msgid "&Name" msgstr "이름(&N)" -#: src/include/reipl/dialogs.rb:175 +#: src/include/reipl/dialogs.rb:175 msgid "reipl configuration" msgstr "Reipl 구성" -#: src/include/reipl/dialogs.rb:177 +#: src/include/reipl/dialogs.rb:177 msgid "help missing in helps.ycp" msgstr "helps.ycp에 도움말 없음" -#. Read dialog help 1/2 -#: src/include/reipl/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/reipl/helps.rb:36 msgid "" "<p><b><big>Initializing reipl Configuration</big></b><br>\n" "</p>\n" @@ -153,8 +153,8 @@ "<p><b><big>reipl 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/reipl/helps.rb:40 +#. Read dialog help 2/2 +#: src/include/reipl/helps.rb:40 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -162,8 +162,8 @@ "<p><b><big>초기화 중단 중:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/reipl/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/reipl/helps.rb:44 msgid "" "<p><b><big>Saving reipl Configuration</big></b><br>\n" "</p>\n" @@ -171,8 +171,8 @@ "<p><b><big>reipl 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/reipl/helps.rb:48 +#. Write dialog help 2/2 +#: src/include/reipl/helps.rb:48 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -184,18 +184,16 @@ "이 작업의 안전 여부를 알리는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Configure dialog help 1 -#: src/include/reipl/helps.rb:55 +#. Configure dialog help 1 +#: src/include/reipl/helps.rb:55 msgid "<p><b><big>s390 reIPL Configuration</big></b></p>" msgstr "<p><b><big>s390 reIPL 구성</big></b></p>" -#. Configure dialog help 2 -#: src/include/reipl/helps.rb:59 +#. Configure dialog help 2 +#: src/include/reipl/helps.rb:59 msgid "" -"<p>Choose one of the methods for rebooting your machine with the radio " -"buttons\n" -"listed inside <b>reipl methods</b>. Depending on what your machine " -"supports,\n" +"<p>Choose one of the methods for rebooting your machine with the radio buttons\n" +"listed inside <b>reipl methods</b>. Depending on what your machine supports,\n" "choose between CCW (channel command word) devices and SCSI devices,\n" "which are attached through zFCP (fibre channel protocol). Then fill out the\n" "necessary parameter entry fields for the respective method.</p>\n" @@ -206,24 +204,21 @@ "통해 연결된 SCSI 장치 간에 선택하십시오. 그런 다음 해당 방법에 필요한\n" "파라미터 입력 필드를 채우십시오.</p>\n" -#. Configure dialog help 3 -#: src/include/reipl/helps.rb:67 +#. Configure dialog help 3 +#: src/include/reipl/helps.rb:67 msgid "" "<p>The <b>device</b> must be a valid device bus ID with lower case letters\n" -"in a sysfs compatible format 0.<i><subchannel set ID></i>.<i><" -"device ID></i>,\n" -"such as 0.0.5c51. Depending on the chosen method, this can either refer to a " -"DASD or to\n" +"in a sysfs compatible format 0.<i><subchannel set ID></i>.<i><device ID></i>,\n" +"such as 0.0.5c51. Depending on the chosen method, this can either refer to a DASD or to\n" "an FCP adapter.</p>" msgstr "" -"<p><b>장치</b>는 0.0.5c51과 같이 0.<i><하위 채널 세트 ID></i>.<i><장" -"치 ID></i>\n" +"<p><b>장치</b>는 0.0.5c51과 같이 0.<i><하위 채널 세트 ID></i>.<i><장치 ID></i>\n" "형식에 맞게 sysfs에서 소문자로 구성된\n" "유효한 장치 버스 ID여야 합니다. 선택한 메소드에 따라 DASD 또는\n" "FCP 어댑터를 참조할 수 있습니다.</p>" -#. Configure dialog help 4 -#: src/include/reipl/helps.rb:74 +#. Configure dialog help 4 +#: src/include/reipl/helps.rb:74 msgid "" "<p>The <b>loadparm</b> must be a maximum of 8 characters and selects a boot\n" "configuration from the menu of the zipl bootloader. Use one blank character\n" @@ -233,8 +228,8 @@ "부팅 구성을 선택합니다. 기본 구성을 선택하려면\n" "한 개의 공백 문자를 사용합니다.</p>" -#. Configure dialog help 5 -#: src/include/reipl/helps.rb:80 +#. Configure dialog help 5 +#: src/include/reipl/helps.rb:80 msgid "" "<p>The <b>worldwide port number</b> (WWPN) must be entered with lowercase\n" "letters as a 16-digit hex value, such as 0x5005076300c40e5a.</p>\n" @@ -242,32 +237,28 @@ "<p>WWPN(<b>WorldWide Port Number</b>)은 소문자\n" "16진수 값(예: 0x5005076300c40e5a)으로 입력해야 합니다.</p>\n" -#. Configure dialog help 6 -#: src/include/reipl/helps.rb:84 +#. Configure dialog help 6 +#: src/include/reipl/helps.rb:84 msgid "" -"<p>The <b>logical unit number</b> (LUN) must be entered with lowercase " -"letters\n" -"as a 16-digit hex value with all trailing zeros, such as 0x52ca000000000000." -"</p>" +"<p>The <b>logical unit number</b> (LUN) must be entered with lowercase letters\n" +"as a 16-digit hex value with all trailing zeros, such as 0x52ca000000000000.</p>" msgstr "" -"<p><b>논리적 단위 번호</b>(LUN)는 0x52ca000000000000과 같이 뒤가 모두 0으로 " -"채워진 16진수 값으로\n" +"<p><b>논리적 단위 번호</b>(LUN)는 0x52ca000000000000과 같이 뒤가 모두 0으로 채워진 16진수 값으로\n" "소문자로 입력해야 합니다.</p>" -#. Configure dialog help 7 -#: src/include/reipl/helps.rb:88 +#. Configure dialog help 7 +#: src/include/reipl/helps.rb:88 msgid "" "<p>The <b>boot program selector</b> must be a non-negative integer choosing\n" "a boot configuration from the menu of the zipl bootloader. Use 0 to select\n" "the default configuration.</p>" msgstr "" -"<p><b>부팅 프로그램 선택기</b>는 zipl 부트 로더의 메뉴에서 부팅 구성을 선택하" -"는\n" +"<p><b>부팅 프로그램 선택기</b>는 zipl 부트 로더의 메뉴에서 부팅 구성을 선택하는\n" "음수가 아닌 정수여야 합니다. 기본 구성을 선택하려면\n" "0을 사용합니다.</p>" -#. Configure dialog help 8 -#: src/include/reipl/helps.rb:94 +#. Configure dialog help 8 +#: src/include/reipl/helps.rb:94 msgid "" "<p>The <b>boot record logical block address</b> (LBA) specifies the master\n" "boot record and is currently always 0.</p>" @@ -275,48 +266,46 @@ "<p><b>부팅 레코드 논리적 블록 주소</b>(LBA)는 마스터\n" "부팅 레코드를 지정하고, 현재 항상 0입니다.</p>" -#. Configure dialog help 9 -#: src/include/reipl/helps.rb:98 +#. Configure dialog help 9 +#: src/include/reipl/helps.rb:98 msgid "" -"<p>After confirmation of this dialog, you may trigger a reboot, e.g. by " -"shutdown,\n" +"<p>After confirmation of this dialog, you may trigger a reboot, e.g. by shutdown,\n" "and the system will automatically restart from your specified device.</p>" msgstr "" -"<p>이 대화 상자를 확인하면 종료 등의 방법을 통해 재부팅을 트리거할 수 있으" -"며,\n" +"<p>이 대화 상자를 확인하면 종료 등의 방법을 통해 재부팅을 트리거할 수 있으며,\n" "시스템은 지정된 장치에서 자동으로 재시작됩니다.</p>" -#. Initialization dialog contents -#: src/include/reipl/wizards.rb:102 +#. Initialization dialog contents +#: src/include/reipl/wizards.rb:102 msgid "Initializing..." msgstr "초기화 중..." -#. Create a textual summary and a list of unconfigured cards -#. @return summary of the current configuration -#: src/modules/Reipl.rb:323 +#. Create a textual summary and a list of unconfigured cards +#. @return summary of the current configuration +#: src/modules/Reipl.rb:323 msgid "Configured reipl methods" msgstr "구성된 reipl 메소드" -#: src/modules/Reipl.rb:330 +#: src/modules/Reipl.rb:330 msgid "The method ccw is configured and being used." msgstr "ccw 메소드가 구성되어 사용 중입니다." -#: src/modules/Reipl.rb:332 +#: src/modules/Reipl.rb:332 msgid "The method ccw is configured." msgstr "ccw 메소드가 구성되었습니다." -#: src/modules/Reipl.rb:335 +#: src/modules/Reipl.rb:335 msgid "The method ccw is not supported." msgstr "ccw 메소드가 지원되지 않습니다." -#: src/modules/Reipl.rb:343 +#: src/modules/Reipl.rb:343 msgid "The method fcp is configured and being used." msgstr "fcp 메소드가 구성되어 사용 중입니다." -#: src/modules/Reipl.rb:345 +#: src/modules/Reipl.rb:345 msgid "The method fcp is configured." msgstr "fcp 메소드가 구성되었습니다." -#: src/modules/Reipl.rb:348 +#: src/modules/Reipl.rb:348 msgid "The method fcp is not supported." msgstr "fcp 메소드가 지원되지 않습니다." Modified: branches/SLE12-SP3/yast/ko/po/relocation-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/relocation-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/relocation-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,13 +14,13 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the relocation-server module -#: src/clients/relocation-server.rb:58 +#. Command line help text for the relocation-server module +#: src/clients/relocation-server.rb:58 msgid "Configuration of relocation-server" msgstr "FTP 서버 구성" -#. yes-no popup -#: src/include/relocation-server/complex.rb:48 +#. yes-no popup +#: src/include/relocation-server/complex.rb:48 msgid "" "Really exit?\n" "All changes will be lost." @@ -28,160 +28,160 @@ "종료하시겠습니까?\n" "모든 변경사항이 손실됩니다." -#. RelocationServer::SetAbortFunction(PollAbort); -#: src/include/relocation-server/complex.rb:166 +#. RelocationServer::SetAbortFunction(PollAbort); +#: src/include/relocation-server/complex.rb:166 msgid "Select SSL Key File" msgstr "SSL 키 파일 선택" -#: src/include/relocation-server/complex.rb:175 +#: src/include/relocation-server/complex.rb:175 msgid "Select SSL Cert File" msgstr "SSL 인증서 파일 선택" -#. A popup dialog caption -#: src/include/relocation-server/complex.rb:303 +#. A popup dialog caption +#: src/include/relocation-server/complex.rb:303 msgid "Add New Port" msgstr "새 포트 추가" -#. A popup dialog caption -#: src/include/relocation-server/complex.rb:305 +#. A popup dialog caption +#: src/include/relocation-server/complex.rb:305 msgid "Edit Current Port" msgstr "현재 포트 편집" -#. A text entry -#: src/include/relocation-server/complex.rb:309 +#. A text entry +#: src/include/relocation-server/complex.rb:309 msgid "&Port" msgstr "포트(&P)" -#: src/include/relocation-server/complex.rb:336 +#: src/include/relocation-server/complex.rb:336 msgid "Port number must not be empty." msgstr "포트 번호는 비워둘 수 없습니다." -#: src/include/relocation-server/complex.rb:343 +#: src/include/relocation-server/complex.rb:343 msgid "Port number out of range." msgstr "포트 번호가 범위를 벗어났습니다." -#: src/include/relocation-server/complex.rb:350 +#: src/include/relocation-server/complex.rb:350 msgid "Port number already exists." msgstr "포트 번호가 이미 있습니다." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/relocation-server/dialogs.ycp -#. Package: Configuration of relocation-server -#. Summary: Dialogs definitions -#. Authors: Li Dongyang -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/relocation-server/dialogs.rb:43 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/relocation-server/dialogs.ycp +#. Package: Configuration of relocation-server +#. Summary: Dialogs definitions +#. Authors: Li Dongyang +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/relocation-server/dialogs.rb:43 msgid "Global Settings" msgstr "전역 설정" -#: src/include/relocation-server/dialogs.rb:49 +#: src/include/relocation-server/dialogs.rb:49 msgid "Relocation Address:" msgstr "재배치 주소:" -#: src/include/relocation-server/dialogs.rb:56 +#: src/include/relocation-server/dialogs.rb:56 msgid "Allowed Hosts:" msgstr "허용된 호스트:" -#: src/include/relocation-server/dialogs.rb:59 +#: src/include/relocation-server/dialogs.rb:59 msgid "Use SSL as Default" msgstr "SSL을 기본값으로 사용" -#: src/include/relocation-server/dialogs.rb:65 +#: src/include/relocation-server/dialogs.rb:65 msgid "non-SSL Server" msgstr "비 SSL 서버" -#: src/include/relocation-server/dialogs.rb:69 -#: src/include/relocation-server/dialogs.rb:85 +#: src/include/relocation-server/dialogs.rb:69 +#: src/include/relocation-server/dialogs.rb:85 msgid "Port:" msgstr "포트:" -#: src/include/relocation-server/dialogs.rb:73 -#: src/include/relocation-server/dialogs.rb:124 +#: src/include/relocation-server/dialogs.rb:73 +#: src/include/relocation-server/dialogs.rb:124 msgid "Enable" msgstr "활성화" -#: src/include/relocation-server/dialogs.rb:79 +#: src/include/relocation-server/dialogs.rb:79 msgid "SSL Server" msgstr "SSL 서버" -#: src/include/relocation-server/dialogs.rb:97 +#: src/include/relocation-server/dialogs.rb:97 msgid "SSL Key File:" msgstr "SSL 키 파일:" -#: src/include/relocation-server/dialogs.rb:111 +#: src/include/relocation-server/dialogs.rb:111 msgid "SSL Cert File:" msgstr "SSL 인증서 파일:" -#: src/include/relocation-server/dialogs.rb:130 -#: src/include/relocation-server/dialogs.rb:187 +#: src/include/relocation-server/dialogs.rb:130 +#: src/include/relocation-server/dialogs.rb:187 msgid "Firewall" msgstr "방화벽" -#: src/include/relocation-server/dialogs.rb:137 +#: src/include/relocation-server/dialogs.rb:137 msgid "Tunneled migration" msgstr "터널링된 마이그레이션" -#: src/include/relocation-server/dialogs.rb:143 +#: src/include/relocation-server/dialogs.rb:143 msgid "Make sure tunneled migration works" msgstr "터널링된 마이그레이션 작동 여부 확인" -#: src/include/relocation-server/dialogs.rb:149 +#: src/include/relocation-server/dialogs.rb:149 msgid "Plain migration" msgstr "일반 마이그레이션" -#: src/include/relocation-server/dialogs.rb:155 +#: src/include/relocation-server/dialogs.rb:155 msgid "Make sure plain migration works" msgstr "일반 마이그레이션 작동 여부 확인" -#: src/include/relocation-server/dialogs.rb:159 +#: src/include/relocation-server/dialogs.rb:159 msgid "TCP Ports" msgstr "TCP 포트" -#. A table header -#: src/include/relocation-server/dialogs.rb:165 +#. A table header +#: src/include/relocation-server/dialogs.rb:165 msgid "Port" msgstr "포트" -#. a push button -#: src/include/relocation-server/dialogs.rb:171 +#. a push button +#: src/include/relocation-server/dialogs.rb:171 msgid "&Add..." msgstr "추가(&A)..." -#. a push button -#: src/include/relocation-server/dialogs.rb:173 +#. a push button +#: src/include/relocation-server/dialogs.rb:173 msgid "&Edit..." msgstr "편집(&E)..." -#. a push button -#: src/include/relocation-server/dialogs.rb:175 +#. a push button +#: src/include/relocation-server/dialogs.rb:175 msgid "&Delete" msgstr "삭제(&D)" -#: src/include/relocation-server/dialogs.rb:182 +#: src/include/relocation-server/dialogs.rb:182 msgid "Include default port range" msgstr "기본 포트 범위 포함" -#. Read dialog help 1/2 -#: src/include/relocation-server/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/relocation-server/helps.rb:36 msgid "" "<p><b><big>Initializing relocation-server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -189,8 +189,8 @@ "<p><b><big>재배치 서버 구성 초기화 중</big></b><br>\n" "잠시 기다려주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/relocation-server/helps.rb:40 +#. Read dialog help 2/2 +#: src/include/relocation-server/helps.rb:40 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -198,8 +198,8 @@ "<p><b><big>초기화 중단 중:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/relocation-server/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/relocation-server/helps.rb:44 msgid "" "<p><b><big>Saving relocation-server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -207,8 +207,8 @@ "<p><b><big>재배치 서버 구성 저장 중</big></b><br>\n" "잠시 기다려주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/relocation-server/helps.rb:48 +#. Write dialog help 2/2 +#: src/include/relocation-server/helps.rb:48 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -220,182 +220,167 @@ "이 작업이 안전한지 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#: src/include/relocation-server/helps.rb:54 +#: src/include/relocation-server/helps.rb:54 msgid "" "<p><b>Relocation Address</b><br>\n" "Address xend should listen on for relocation-socket connections</p>\n" "<p><b>Allowed Hosts</b><br>\n" -"The hosts allowed to talk to the relocation port. If this is empty, then all " -"connections are allowed. Otherwise, this should be a space-separated " -"sequence of regular expressions. Any host with a fully-qualified domain name " -"or an IP address that matches one of these regular expressions will be " -"accepted.</p>\n" +"The hosts allowed to talk to the relocation port. If this is empty, then all connections are allowed. Otherwise, this should be a space-separated sequence of regular expressions. Any host with a fully-qualified domain name or an IP address that matches one of these regular expressions will be accepted.</p>\n" "<p><b>SSL Key File/SSL Cert File</b><br>\n" "SSL key and certificate to use for the ssl relocation interface</p>" msgstr "" "<p><b>재배치 주소</b><br>\n" "주소 xend는 재배치 소켓 연결을 위해 수신 대기해야 합니다.</p>\n" "<p><b>허용된 호스트</b><br>\n" -"재배치 포트와 통신할 수 있는 호스트. 이 옵션이 비어 있는 경우 모든 연결이 허" -"용됩니다. 그렇지 않은 경우 이 항목은 공백으로 분리된 연속된 정규식이어야 합니" -"다. 정규화된 도메인 이름 또는 정규식 중 한 개와 일치하는 IP 주소로 구성된 모" -"든 호스트가 허용됩니다.</p>\n" +"재배치 포트와 통신할 수 있는 호스트. 이 옵션이 비어 있는 경우 모든 연결이 허용됩니다. 그렇지 않은 경우 이 항목은 공백으로 분리된 연속된 정규식이어야 합니다. 정규화된 도메인 이름 또는 정규식 중 한 개와 일치하는 IP 주소로 구성된 모든 호스트가 허용됩니다.</p>\n" "<p><b>SSL 키 파일/SSL 인증서 파일</b><br>\n" "SSL 재배치 인터페이스에 사용하는 SSL 키 및 인증서</p>" -#: src/include/relocation-server/helps.rb:62 +#: src/include/relocation-server/helps.rb:62 msgid "" "<p><b><big>Tunneled migration</big></b><br>\n" -"The source host libvirtd opens a direct connection to the destination host " -"libvirtd for sending migration data. This allows the option of encrypting " -"the data stream.</p>\n" +"The source host libvirtd opens a direct connection to the destination host libvirtd for sending migration data. This allows the option of encrypting the data stream.</p>\n" "<p><b><big>Plain migration</big></b><br>\n" -"The source host VM opens a direct unencrypted TCP connection to the " -"destination host for sending the migration data. Unless a port is manually " -"specified, libvirt will choose a migration port in the default range.</p>" +"The source host VM opens a direct unencrypted TCP connection to the destination host for sending the migration data. Unless a port is manually specified, libvirt will choose a migration port in the default range.</p>" msgstr "" "<p><b><big>터널링된 마이그레이션</big></b><br>\n" -"소스 호스트 libvirtd가 마이그레이션 데이터를 전송하기 위해 대상 호스트 " -"libvirtd에 대한 직접 연결을 엽니다. 이렇게 하면 데이터 스트림을 암호화할 수 " -"있습니다.</p>\n" +"소스 호스트 libvirtd가 마이그레이션 데이터를 전송하기 위해 대상 호스트 libvirtd에 대한 직접 연결을 엽니다. 이렇게 하면 데이터 스트림을 암호화할 수 있습니다.</p>\n" "<p><b><big>일반 마이그레이션</big></b><br>\n" -"소스 호스트 VM이 마이그레이션 데이터를 전송하기 위해 대상 호스트에 대한 암호" -"화되지 않은 직접 TCP 연결을 엽니다. 포트를 수동으로 지정하지 않는 경우 " -"libvirt가 기본 범위의 마이그레이션 포트를 선택합니다.</p>" +"소스 호스트 VM이 마이그레이션 데이터를 전송하기 위해 대상 호스트에 대한 암호화되지 않은 직접 TCP 연결을 엽니다. 포트를 수동으로 지정하지 않는 경우 libvirt가 기본 범위의 마이그레이션 포트를 선택합니다.</p>" -#. Main workflow of the relocation-server configuration -#. @return sequence result -#: src/include/relocation-server/wizards.rb:104 +#. Main workflow of the relocation-server configuration +#. @return sequence result +#: src/include/relocation-server/wizards.rb:104 msgid "&Xend" msgstr "Xend(&X)" -#: src/include/relocation-server/wizards.rb:109 +#: src/include/relocation-server/wizards.rb:109 msgid "&KVM" msgstr "KVM(&K)" -#: src/include/relocation-server/wizards.rb:114 +#: src/include/relocation-server/wizards.rb:114 msgid "&Xen Libxl" msgstr "Xen Libxl(&X)" -#: src/include/relocation-server/wizards.rb:161 +#: src/include/relocation-server/wizards.rb:161 msgid "Relocation Server Configuration" msgstr "재배치 서버 구성" -#. RelocationServer read dialog caption -#: src/modules/RelocationServer.rb:307 +#. RelocationServer read dialog caption +#: src/modules/RelocationServer.rb:307 msgid "Initializing relocation-server Configuration" msgstr "재배치 서버 구성 초기화 중" -#. Progress stage 1/3 -#: src/modules/RelocationServer.rb:317 +#. Progress stage 1/3 +#: src/modules/RelocationServer.rb:317 msgid "Read the current xend configuration" msgstr "현재 xend 구성 읽기" -#. Progress stage 2/3 -#: src/modules/RelocationServer.rb:319 +#. Progress stage 2/3 +#: src/modules/RelocationServer.rb:319 msgid "Read the current xend state" msgstr "현재 xend 상태 읽기" -#. Progress stage 3/3 -#. Progress stage 1/2 -#: src/modules/RelocationServer.rb:321 src/modules/RelocationServer.rb:337 +#. Progress stage 3/3 +#. Progress stage 1/2 +#: src/modules/RelocationServer.rb:321 src/modules/RelocationServer.rb:337 msgid "Read firewall settings" msgstr "방화벽 설정 읽기" -#. Progress step 1/3 -#: src/modules/RelocationServer.rb:326 +#. Progress step 1/3 +#: src/modules/RelocationServer.rb:326 msgid "Reading the current xend configuration..." msgstr "현재 xend 구성을 읽는 중..." -#. Progress step 2/3 -#: src/modules/RelocationServer.rb:328 +#. Progress step 2/3 +#: src/modules/RelocationServer.rb:328 msgid "Reading the current xend state..." msgstr "현재 xend 상태를 읽는 중..." -#. Progress step 3/3 -#. Progress step 1/2 -#: src/modules/RelocationServer.rb:330 src/modules/RelocationServer.rb:344 +#. Progress step 3/3 +#. Progress step 1/2 +#: src/modules/RelocationServer.rb:330 src/modules/RelocationServer.rb:344 msgid "Reading firewall settings..." msgstr "방화벽 설정을 읽는 중..." -#. Progress stage 2/2 -#: src/modules/RelocationServer.rb:339 +#. Progress stage 2/2 +#: src/modules/RelocationServer.rb:339 msgid "Read the current libvirtd/sshd state" msgstr "현재 libvirtd/sshd 상태 읽기" -#. Progress stage 2/2 -#: src/modules/RelocationServer.rb:346 +#. Progress stage 2/2 +#: src/modules/RelocationServer.rb:346 msgid "Reading the current libvirtd/sshd state..." msgstr "현재 libvirtd/sshd 상태를 읽는 중..." -#. Error message -#: src/modules/RelocationServer.rb:368 +#. Error message +#: src/modules/RelocationServer.rb:368 msgid "Cannot read the current Xend state." msgstr "현재 Xend 상태를 읽을 수 없습니다." -#. Error message -#: src/modules/RelocationServer.rb:377 +#. Error message +#: src/modules/RelocationServer.rb:377 msgid "Cannot read firewall settings." msgstr "방화벽 설정을 읽을 수 없습니다." -#. Error message -#: src/modules/RelocationServer.rb:386 +#. Error message +#: src/modules/RelocationServer.rb:386 msgid "Cannot read the current libvirtd/sshd state." msgstr "현재 libvirtd/sshd 상태를 읽을 수 없습니다." -#. RelocationServer read dialog caption -#: src/modules/RelocationServer.rb:407 +#. RelocationServer read dialog caption +#: src/modules/RelocationServer.rb:407 msgid "Saving relocation-server Configuration" msgstr "재배치 서버 구성 저장 중" -#. Progress stage 1 -#: src/modules/RelocationServer.rb:417 +#. Progress stage 1 +#: src/modules/RelocationServer.rb:417 msgid "Write the Xend settings" msgstr "Xend 설정 쓰기" -#. Progress stage 2 -#: src/modules/RelocationServer.rb:419 +#. Progress stage 2 +#: src/modules/RelocationServer.rb:419 msgid "Adjust the Xend service" msgstr "Xend 서비스 조정" -#. Progress stage 3 -#. Progress stage 2 -#: src/modules/RelocationServer.rb:421 src/modules/RelocationServer.rb:438 +#. Progress stage 3 +#. Progress stage 2 +#: src/modules/RelocationServer.rb:421 src/modules/RelocationServer.rb:438 msgid "Write firewall settings" msgstr "방화벽 설정 쓰기" -#. Progress step 1 -#: src/modules/RelocationServer.rb:426 +#. Progress step 1 +#: src/modules/RelocationServer.rb:426 msgid "Writing the Xend settings..." msgstr "Xend 설정을 쓰는 중..." -#. Progress step 2 -#: src/modules/RelocationServer.rb:428 +#. Progress step 2 +#: src/modules/RelocationServer.rb:428 msgid "Adjusting the Xend service..." msgstr "Xend 서비스를 조정 중..." -#. Progress step 3 -#. Progress stage 2 -#: src/modules/RelocationServer.rb:430 src/modules/RelocationServer.rb:445 +#. Progress step 3 +#. Progress stage 2 +#: src/modules/RelocationServer.rb:430 src/modules/RelocationServer.rb:445 msgid "Writing firewall settings..." msgstr "방화벽 설정을 쓰는 중..." -#. Progress stage 1 -#: src/modules/RelocationServer.rb:436 +#. Progress stage 1 +#: src/modules/RelocationServer.rb:436 msgid "Adjust the libvirtd/sshd service" msgstr "libvirtd/sshd 서비스 조정" -#. Progress step 1 -#: src/modules/RelocationServer.rb:443 +#. Progress step 1 +#: src/modules/RelocationServer.rb:443 msgid "Adjusting the libvirtd/sshd service" msgstr "libvirtd/sshd 서비스 조정 중" -#. Error message -#: src/modules/RelocationServer.rb:460 +#. Error message +#: src/modules/RelocationServer.rb:460 msgid "Cannot write the xend settings." msgstr "xend 설정을 쓸 수 없습니다." -#. Error message -#: src/modules/RelocationServer.rb:481 +#. Error message +#: src/modules/RelocationServer.rb:481 msgid "Cannot write firewall settings." msgstr "방화벽 설정을 쓸 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/rpm-groups.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/rpm-groups.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/rpm-groups.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -1,658 +1,657 @@ # Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg # This file is distributed under the same license as the package. -# -msgid "" -msgstr "" -"Project-Id-Version: rpm-groups\n" -"Report-Msgid-Bugs-To: bugzilla.opensuse.org\n" -"POT-Creation-Date: 2016-10-09 12:27+0300\n" -"PO-Revision-Date: 2017-04-18 14:13\n" -"Last-Translator: Novell language \n" -"Language-Team: Novell language \n" -"Language: en\n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -msgid "3D" -msgstr "3D" - -msgid "3D Editors" -msgstr "3D 편집기" - -msgid "Action" -msgstr "수행" - -msgid "Amusements" -msgstr "오락" - -msgid "Application" -msgstr "응용 프로그램" - -msgid "Applications" -msgstr "응용 프로그램" - -msgid "Arcade" -msgstr "아케이드" - -msgid "Archiving" -msgstr "아카이브 설정" - -msgid "Astronomy" -msgstr "천문학" - -msgid "Background" -msgstr "배경" - -msgid "Backup" -msgstr "백업" - -msgid "Base" -msgstr "기초" - -msgid "Benchmark" -msgstr "벤치 마크" - -msgid "Bitmap Editors" -msgstr "비트맵 편집기" - -msgid "Board" -msgstr "보드" - -msgid "Boot" -msgstr "부트" - -msgid "Breakout" -msgstr "브레이크아웃" - -msgid "Browsers" -msgstr "브라우저" - -msgid "Building" -msgstr "빌드하기" - -msgid "CAD" -msgstr "CAD" - -msgid "Camera" -msgstr "카메라" - -msgid "C and C++" -msgstr "C 와 C++" - -msgid "Card" -msgstr "카드" - -msgid "CD" -msgstr "CD" - -msgid "Chemistry" -msgstr "화학" - -msgid "Chess" -msgstr "체스" - -msgid "Chinese" -msgstr "중국어" - -msgid "Clients" -msgstr "클라이언트" - -msgid "Clocks" -msgstr "시계" - -msgid "Clustering" -msgstr "클러스터링" - -msgid "Compression" -msgstr "압축" - -msgid "Computing" -msgstr "계산" - -msgid "Console" -msgstr "콘솔" - -msgid "Convertors" -msgstr "변환기" - -msgid "Daemon" -msgstr "데몬" - -msgid "Daemons" -msgstr "데몬" - -msgid "Databases" -msgstr "데이터베이스" - -msgid "Debug" -msgstr "디버그" - -msgid "Debuggers" -msgstr "디버거" - -msgid "Desktops" -msgstr "데스크톱" - -msgid "Development" -msgstr "개발" - -msgid "Diagnostic" -msgstr "진단 메시지" - -msgid "Dictionary" -msgstr "사전" - -msgid "Displaymanagers" -msgstr "디스플레이 매니저" - -msgid "DNS" -msgstr "DNS" - -msgid "DocBook" -msgstr "문서책" - -msgid "Doc Generators" -msgstr "문서 생성프로그램" - -msgid "Documentation" -msgstr "문서화" - -msgid "Editors" -msgstr "편집기" - -msgid "Editors and Convertors" -msgstr "편집기와 변환기" - -msgid "Electronics" -msgstr "전자" - -msgid "Emacs" -msgstr "이멕스" - -msgid "Email" -msgstr "이메일" - -msgid "Emulators" -msgstr "에뮬레이터" - -msgid "Fax" -msgstr "팩스" - -msgid "Fhs" -msgstr "Fhs" - -msgid "File-Sharing" -msgstr "파일 공유" - -msgid "Filesystem" -msgstr "파일 시스템" - -msgid "Filesystems" -msgstr "파일시스템" - -msgid "File utilities" -msgstr "파일 유틸리티" - -msgid "Finance" -msgstr "재정" - -msgid "Fonts" -msgstr "폰트" - -msgid "Fortran" -msgstr "포트란" - -msgid "Frontends" -msgstr "프론트엔드" - -msgid "Ftp" -msgstr "Ftp" - -msgid "Games" -msgstr "게임" - -msgid "GNOME" -msgstr "그놈" - -msgid "Golang" -msgstr "Golang" - -msgid "Grabbers" -msgstr "흥미진진한" - -msgid "Graph" -msgstr "그래프" - -msgid "Graphics" -msgstr "그래픽" - -msgid "group" -msgstr "그룹" - -msgid "GUI" -msgstr "GUI" - -msgid "GUI Builders" -msgstr "GUI 빌더" - -msgid "H323" -msgstr "H323" - -msgid "HA" -msgstr "HA" - -msgid "Hamradio" -msgstr "햄라디오" - -msgid "Hardware" -msgstr "하드웨어" - -msgid "Howto" -msgstr "하우투" - -msgid "HTML" -msgstr "HTML" - -msgid "I18n" -msgstr "I18n" - -msgid "Icons" -msgstr "아이콘" - -msgid "IDE" -msgstr "IDE" - -msgid "Instant Messenger" -msgstr "인스턴트 메신저" - -msgid "Internet" -msgstr "인터넷" - -msgid "IRC" -msgstr "IRC" - -msgid "ISDN" -msgstr "ISDN" - -msgid "Japanese" -msgstr "일본어" - -msgid "Java" -msgstr "자바" - -msgid "Joystick" -msgstr "조이스틱" - -msgid "KDE" -msgstr "KDE" - -msgid "Kernel" -msgstr "커널" - -msgid "Korean" -msgstr "한국어" - -msgid "Language" -msgstr "언어" - -msgid "Languages" -msgstr "언어" - -msgid "LDAP" -msgstr "LDAP" - -msgid "Libraries" -msgstr "라이브러리" - -msgid "Localization" -msgstr "지역화" - -msgid "Logic" -msgstr "논리" - -msgid "LogicGame" -msgstr "LogicGame" - -msgid "Lua" -msgstr "Lua" - -msgid "LXDE" -msgstr "LXDE" - -msgid "LXDE-Qt" -msgstr "LXDE-Qt" - -msgid "LXQt" -msgstr "LXQt" - -msgid "Mailinglists" -msgstr "메일링 리스트" - -msgid "Man" -msgstr "Man" - -msgid "Management" -msgstr "관리" - -msgid "Math" -msgstr "수학" - -msgid "Mathematics" -msgstr "수학" - -msgid "Metapackages" -msgstr "메타패키지" - -msgid "Midi" -msgstr "Midi" - -msgid "Mixers" -msgstr "Mixer" - -msgid "Mobile" -msgstr "모바일" - -msgid "Modem" -msgstr "모뎀" - -msgid "Monitoring" -msgstr "모니터링" - -msgid "Mono" -msgstr "모노" - -msgid "Multimedia" -msgstr "멀티미디어" - -msgid "Navigators" -msgstr "네비게이터" - -msgid "Networking" -msgstr "네트워킹" - -msgid "News" -msgstr "뉴스" - -msgid "NFS" -msgstr "NFS" - -msgid "NIS" -msgstr "NIS" - -msgid "NodeJS" -msgstr "Node.js" - -msgid "Office" -msgstr "사무실" - -msgid "Organizers" -msgstr "조직자" - -msgid "Other" -msgstr "기타" - -msgid "Packages" -msgstr "패키지" - -msgid "Palm" -msgstr "팜" - -msgid "Parallel" -msgstr "병렬" - -msgid "PC" -msgstr "PC" - -msgid "PDF" -msgstr "PDF" - -msgid "Perl" -msgstr "Perl" - -msgid "PHP" -msgstr "PHP" - -msgid "Physics" -msgstr "물리학" - -msgid "Players" -msgstr "플레이어" - -msgid "PPP" -msgstr "PPP" - -msgid "Presentation" -msgstr "프리젠테이션" - -msgid "Printing" -msgstr "프린팅" - -msgid "Productivity" -msgstr "생산성" - -msgid "Proxy" -msgstr "프록시" - -msgid "PS" -msgstr "PS" - -msgid "Psion" -msgstr "Psion" - -msgid "Publishing" -msgstr "출판" - -msgid "Puzzle" -msgstr "퍼즐" - -msgid "Python" -msgstr "파이썬" - -msgid "Python3" -msgstr "3Python" - -msgid "Race" -msgstr "경주" - -msgid "Radius" -msgstr "반경" - -msgid "Raytracers" -msgstr "Raytracers" - -msgid "Real Time" -msgstr "실 시간" - -msgid "Record" -msgstr "레코드" - -msgid "Remote Desktop" -msgstr "원격 데스크톱" - -msgid "Routing" -msgstr "라우팅" - -msgid "RPG" -msgstr "RPG" - -msgid "Ruby" -msgstr "Ruby" - -msgid "Samba" -msgstr "삼바" - -msgid "Scanner" -msgstr "스캐너" - -msgid "Scheme" -msgstr "계획" - -msgid "Scientific" -msgstr "과학" - -msgid "Screensavers" -msgstr "스크린세이버" - -msgid "Security" -msgstr "보안" - -msgid "Servers" -msgstr "서버" - -msgid "SGML" -msgstr "SGML" - -msgid "Shells" -msgstr "쉘" - -msgid "Shoot" -msgstr "Chroot" - -msgid "Simulation" -msgstr "시뮬레이션" - -msgid "SIP" -msgstr "SIP" - -msgid "SLES" -msgstr "SLES" - -msgid "Sound" -msgstr "사운드" - -msgid "Sound Daemons" -msgstr "사운드 데몬" - -msgid "Sources" -msgstr "소스" - -msgid "Spell" -msgstr "Spell" - -msgid "Spreadsheets" -msgstr "스프레드시트" - -msgid "SSH" -msgstr "SSH" - -msgid "Strategy" -msgstr "전략" - -msgid "StrategyGame" -msgstr "전략게임" - -msgid "Suite" -msgstr "Suite" - -msgid "SUSE" -msgstr "SuSE" - -msgid "System" -msgstr "시스템" - -msgid "System Environment" -msgstr "시스템 환경" - -msgid "Talk" -msgstr "Talk" - -msgid "Tcl" -msgstr "Tcl" - -msgid "Teaching" -msgstr "교육" - -msgid "Telephony" -msgstr "전화 통신" - -msgid "Terminals" -msgstr "터미널" - -msgid "Tests" -msgstr "테스트" - -msgid "TeX" -msgstr "TeX" - -msgid "Texinfo" -msgstr "Tex정보" - -msgid "Text" -msgstr "테스트" - -msgid "Tools" -msgstr "도구" - -msgid "Toys" -msgstr "장난감" - -msgid "Troff" -msgstr "Troff" - -msgid "Turn Based" -msgstr "기본 전환" - -msgid "TV" -msgstr "TV" - -msgid "Unspecified" -msgstr "지정되지 않음" - -msgid "UPS" -msgstr "UPS" - -msgid "User Interface" -msgstr "사용자 인터페이스" - -msgid "Utilities" -msgstr "유틸리티" - -msgid "Vector Editors" -msgstr "벡터 편집기" - -msgid "Version Control" -msgstr "버전 제어" - -msgid "Vi" -msgstr "Vi" - -msgid "Video" -msgstr "비디오" - -msgid "Viewers" -msgstr "뷰어" - -msgid "Visualization" -msgstr "시각화" - -msgid "Web" -msgstr "웹" - -msgid "Wifi" -msgstr "Wifi" - -msgid "Word" -msgstr "워드" - -msgid "Word Processor" -msgstr "워드 프로세서" - -msgid "X11" -msgstr "X11" - -msgid "XF86_4" -msgstr "XF86_4" - -msgid "XFCE" -msgstr "XFCE" - -msgid "XML" -msgstr "XML" - -msgid "Yast" -msgstr "Yast" - -msgid "YaST" -msgstr "YaST" - +# +msgid "" +msgstr "" +"Project-Id-Version: rpm-groups\n" +"Report-Msgid-Bugs-To: bugzilla.opensuse.org\n" +"POT-Creation-Date: 2016-10-09 12:27+0300\n" +"PO-Revision-Date: 2017-04-18 14:13\n" +"Last-Translator: Novell language \n" +"Language-Team: Novell language \n" +"Language: en\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +msgid "3D" +msgstr "3D" + +msgid "3D Editors" +msgstr "3D 편집기" + +msgid "Action" +msgstr "수행" + +msgid "Amusements" +msgstr "오락" + +msgid "Application" +msgstr "응용 프로그램" + +msgid "Applications" +msgstr "응용 프로그램" + +msgid "Arcade" +msgstr "아케이드" + +msgid "Archiving" +msgstr "아카이브 설정" + +msgid "Astronomy" +msgstr "천문학" + +msgid "Background" +msgstr "배경" + +msgid "Backup" +msgstr "백업" + +msgid "Base" +msgstr "기초" + +msgid "Benchmark" +msgstr "벤치 마크" + +msgid "Bitmap Editors" +msgstr "비트맵 편집기" + +msgid "Board" +msgstr "보드" + +msgid "Boot" +msgstr "부트" + +msgid "Breakout" +msgstr "브레이크아웃" + +msgid "Browsers" +msgstr "브라우저" + +msgid "Building" +msgstr "빌드하기" + +msgid "CAD" +msgstr "CAD" + +msgid "Camera" +msgstr "카메라" + +msgid "C and C++" +msgstr "C 와 C++" + +msgid "Card" +msgstr "카드" + +msgid "CD" +msgstr "CD" + +msgid "Chemistry" +msgstr "화학" + +msgid "Chess" +msgstr "체스" + +msgid "Chinese" +msgstr "중국어" + +msgid "Clients" +msgstr "클라이언트" + +msgid "Clocks" +msgstr "시계" + +msgid "Clustering" +msgstr "클러스터링" + +msgid "Compression" +msgstr "압축" + +msgid "Computing" +msgstr "계산" + +msgid "Console" +msgstr "콘솔" + +msgid "Convertors" +msgstr "변환기" + +msgid "Daemon" +msgstr "데몬" + +msgid "Daemons" +msgstr "데몬" + +msgid "Databases" +msgstr "데이터베이스" + +msgid "Debug" +msgstr "디버그" + +msgid "Debuggers" +msgstr "디버거" + +msgid "Desktops" +msgstr "데스크톱" + +msgid "Development" +msgstr "개발" + +msgid "Diagnostic" +msgstr "진단 메시지" + +msgid "Dictionary" +msgstr "사전" + +msgid "Displaymanagers" +msgstr "디스플레이 매니저" + +msgid "DNS" +msgstr "DNS" + +msgid "DocBook" +msgstr "문서책" + +msgid "Doc Generators" +msgstr "문서 생성프로그램" + +msgid "Documentation" +msgstr "문서화" + +msgid "Editors" +msgstr "편집기" + +msgid "Editors and Convertors" +msgstr "편집기와 변환기" + +msgid "Electronics" +msgstr "전자" + +msgid "Emacs" +msgstr "이멕스" + +msgid "Email" +msgstr "이메일" + +msgid "Emulators" +msgstr "에뮬레이터" + +msgid "Fax" +msgstr "팩스" + +msgid "Fhs" +msgstr "Fhs" + +msgid "File-Sharing" +msgstr "파일 공유" + +msgid "Filesystem" +msgstr "파일 시스템" + +msgid "Filesystems" +msgstr "파일시스템" + +msgid "File utilities" +msgstr "파일 유틸리티" + +msgid "Finance" +msgstr "재정" + +msgid "Fonts" +msgstr "폰트" + +msgid "Fortran" +msgstr "포트란" + +msgid "Frontends" +msgstr "프론트엔드" + +msgid "Ftp" +msgstr "Ftp" + +msgid "Games" +msgstr "게임" + +msgid "GNOME" +msgstr "그놈" + +msgid "Golang" +msgstr "Golang" + +msgid "Grabbers" +msgstr "흥미진진한" + +msgid "Graph" +msgstr "그래프" + +msgid "Graphics" +msgstr "그래픽" + +msgid "group" +msgstr "그룹" + +msgid "GUI" +msgstr "GUI" + +msgid "GUI Builders" +msgstr "GUI 빌더" + +msgid "H323" +msgstr "H323" + +msgid "HA" +msgstr "HA" + +msgid "Hamradio" +msgstr "햄라디오" + +msgid "Hardware" +msgstr "하드웨어" + +msgid "Howto" +msgstr "하우투" + +msgid "HTML" +msgstr "HTML" + +msgid "I18n" +msgstr "I18n" + +msgid "Icons" +msgstr "아이콘" + +msgid "IDE" +msgstr "IDE" + +msgid "Instant Messenger" +msgstr "인스턴트 메신저" + +msgid "Internet" +msgstr "인터넷" + +msgid "IRC" +msgstr "IRC" + +msgid "ISDN" +msgstr "ISDN" + +msgid "Japanese" +msgstr "일본어" + +msgid "Java" +msgstr "자바" + +msgid "Joystick" +msgstr "조이스틱" + +msgid "KDE" +msgstr "KDE" + +msgid "Kernel" +msgstr "커널" + +msgid "Korean" +msgstr "한국어" + +msgid "Language" +msgstr "언어" + +msgid "Languages" +msgstr "언어" + +msgid "LDAP" +msgstr "LDAP" + +msgid "Libraries" +msgstr "라이브러리" + +msgid "Localization" +msgstr "지역화" + +msgid "Logic" +msgstr "논리" + +msgid "LogicGame" +msgstr "LogicGame" + +msgid "Lua" +msgstr "Lua" + +msgid "LXDE" +msgstr "LXDE" + +msgid "LXDE-Qt" +msgstr "LXDE-Qt" + +msgid "LXQt" +msgstr "LXQt" + +msgid "Mailinglists" +msgstr "메일링 리스트" + +msgid "Man" +msgstr "Man" + +msgid "Management" +msgstr "관리" + +msgid "Math" +msgstr "수학" + +msgid "Mathematics" +msgstr "수학" + +msgid "Metapackages" +msgstr "메타패키지" + +msgid "Midi" +msgstr "Midi" + +msgid "Mixers" +msgstr "Mixer" + +msgid "Mobile" +msgstr "모바일" + +msgid "Modem" +msgstr "모뎀" + +msgid "Monitoring" +msgstr "모니터링" + +msgid "Mono" +msgstr "모노" + +msgid "Multimedia" +msgstr "멀티미디어" + +msgid "Navigators" +msgstr "네비게이터" + +msgid "Networking" +msgstr "네트워킹" + +msgid "News" +msgstr "뉴스" + +msgid "NFS" +msgstr "NFS" + +msgid "NIS" +msgstr "NIS" + +msgid "NodeJS" +msgstr "Node.js" + +msgid "Office" +msgstr "사무실" + +msgid "Organizers" +msgstr "조직자" + +msgid "Other" +msgstr "기타" + +msgid "Packages" +msgstr "패키지" + +msgid "Palm" +msgstr "팜" + +msgid "Parallel" +msgstr "병렬" + +msgid "PC" +msgstr "PC" + +msgid "PDF" +msgstr "PDF" + +msgid "Perl" +msgstr "Perl" + +msgid "PHP" +msgstr "PHP" + +msgid "Physics" +msgstr "물리학" + +msgid "Players" +msgstr "플레이어" + +msgid "PPP" +msgstr "PPP" + +msgid "Presentation" +msgstr "프리젠테이션" + +msgid "Printing" +msgstr "프린팅" + +msgid "Productivity" +msgstr "생산성" + +msgid "Proxy" +msgstr "프록시" + +msgid "PS" +msgstr "PS" + +msgid "Psion" +msgstr "Psion" + +msgid "Publishing" +msgstr "출판" + +msgid "Puzzle" +msgstr "퍼즐" + +msgid "Python" +msgstr "파이썬" + +msgid "Python3" +msgstr "3Python" + +msgid "Race" +msgstr "경주" + +msgid "Radius" +msgstr "반경" + +msgid "Raytracers" +msgstr "Raytracers" + +msgid "Real Time" +msgstr "실 시간" + +msgid "Record" +msgstr "레코드" + +msgid "Remote Desktop" +msgstr "원격 데스크톱" + +msgid "Routing" +msgstr "라우팅" + +msgid "RPG" +msgstr "RPG" + +msgid "Ruby" +msgstr "Ruby" + +msgid "Samba" +msgstr "삼바" + +msgid "Scanner" +msgstr "스캐너" + +msgid "Scheme" +msgstr "계획" + +msgid "Scientific" +msgstr "과학" + +msgid "Screensavers" +msgstr "스크린세이버" + +msgid "Security" +msgstr "보안" + +msgid "Servers" +msgstr "서버" + +msgid "SGML" +msgstr "SGML" + +msgid "Shells" +msgstr "쉘" + +msgid "Shoot" +msgstr "Chroot" + +msgid "Simulation" +msgstr "시뮬레이션" + +msgid "SIP" +msgstr "SIP" + +msgid "SLES" +msgstr "SLES" + +msgid "Sound" +msgstr "사운드" + +msgid "Sound Daemons" +msgstr "사운드 데몬" + +msgid "Sources" +msgstr "소스" + +msgid "Spell" +msgstr "Spell" + +msgid "Spreadsheets" +msgstr "스프레드시트" + +msgid "SSH" +msgstr "SSH" + +msgid "Strategy" +msgstr "전략" + +msgid "StrategyGame" +msgstr "전략게임" + +msgid "Suite" +msgstr "Suite" + +msgid "SUSE" +msgstr "SuSE" + +msgid "System" +msgstr "시스템" + +msgid "System Environment" +msgstr "시스템 환경" + +msgid "Talk" +msgstr "Talk" + +msgid "Tcl" +msgstr "Tcl" + +msgid "Teaching" +msgstr "교육" + +msgid "Telephony" +msgstr "전화 통신" + +msgid "Terminals" +msgstr "터미널" + +msgid "Tests" +msgstr "테스트" + +msgid "TeX" +msgstr "TeX" + +msgid "Texinfo" +msgstr "Tex정보" + +msgid "Text" +msgstr "테스트" + +msgid "Tools" +msgstr "도구" + +msgid "Toys" +msgstr "장난감" + +msgid "Troff" +msgstr "Troff" + +msgid "Turn Based" +msgstr "기본 전환" + +msgid "TV" +msgstr "TV" + +msgid "Unspecified" +msgstr "지정되지 않음" + +msgid "UPS" +msgstr "UPS" + +msgid "User Interface" +msgstr "사용자 인터페이스" + +msgid "Utilities" +msgstr "유틸리티" + +msgid "Vector Editors" +msgstr "벡터 편집기" + +msgid "Version Control" +msgstr "버전 제어" + +msgid "Vi" +msgstr "Vi" + +msgid "Video" +msgstr "비디오" + +msgid "Viewers" +msgstr "뷰어" + +msgid "Visualization" +msgstr "시각화" + +msgid "Web" +msgstr "웹" + +msgid "Wifi" +msgstr "Wifi" + +msgid "Word" +msgstr "워드" + +msgid "Word Processor" +msgstr "워드 프로세서" + +msgid "X11" +msgstr "X11" + +msgid "XF86_4" +msgstr "XF86_4" + +msgid "XFCE" +msgstr "XFCE" + +msgid "XML" +msgstr "XML" + +msgid "Yast" +msgstr "Yast" + +msgid "YaST" +msgstr "YaST" Modified: branches/SLE12-SP3/yast/ko/po/s390.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/s390.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/s390.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,171 +14,170 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xcontroller module -#: src/clients/dasd.rb:49 +#. Command line help text for the Xcontroller module +#: src/clients/dasd.rb:49 msgid "Configuration of DASD" msgstr "DASD 구성" -#. text for installation summary -#: src/clients/dasd_proposal.rb:46 +#. text for installation summary +#: src/clients/dasd_proposal.rb:46 msgid "No DASD disk detected" msgstr "검색된 DASD 디스크가 없습니다." -#. section name in proposal dialog -#: src/clients/dasd_proposal.rb:71 +#. section name in proposal dialog +#: src/clients/dasd_proposal.rb:71 msgid "DASD" msgstr "DASD" -#. section name in proposal - menu item -#: src/clients/dasd_proposal.rb:73 src/include/s390/dump/ui.rb:110 +#. section name in proposal - menu item +#: src/clients/dasd_proposal.rb:73 src/include/s390/dump/ui.rb:110 msgid "&DASD" msgstr "DASD(&D)" -#. Command line help text for the Xcontroller module -#: src/clients/dump.rb:50 +#. Command line help text for the Xcontroller module +#: src/clients/dump.rb:50 msgid "Creation of S/390 dump devices" msgstr "S/390 덤프 장치 생성" -#. Command line help text for the Xcontroller module -#: src/clients/iucvterminal-server.rb:45 +#. Command line help text for the Xcontroller module +#: src/clients/iucvterminal-server.rb:45 msgid "Configuration of IUCV terminal server" msgstr "IUCV 터미널 서버 구성" -#. Command line help text for the Xcontroller module -#: src/clients/iucvterminal.rb:45 +#. Command line help text for the Xcontroller module +#: src/clients/iucvterminal.rb:45 msgid "Configuration of IUCV terminal settings" msgstr "IUCV 터미널 설정 구성" -#. Command line help text for the OnPanic module -#: src/clients/onpanic.rb:52 +#. Command line help text for the OnPanic module +#: src/clients/onpanic.rb:52 msgid "Configuration of OnPanic" msgstr "OnPanic 구성" -#. popup label -#: src/clients/s390-disk-controller.rb:49 +#. popup label +#: src/clients/s390-disk-controller.rb:49 msgid "Detecting Available Controllers" msgstr "사용 가능한 컨트롤러 검색" -#. Initialization dialog caption -#: src/clients/s390-disk-controller.rb:72 +#. Initialization dialog caption +#: src/clients/s390-disk-controller.rb:72 msgid "S/390 Disk Controller Configuration" msgstr "S/390 디스크 컨트롤러 구성" -#. push button -#: src/clients/s390-disk-controller.rb:84 +#. push button +#: src/clients/s390-disk-controller.rb:84 msgid "Configure &DASD Disks" msgstr "DASD 디스크 구성(&D)" -#. push button -#: src/clients/s390-disk-controller.rb:94 +#. push button +#: src/clients/s390-disk-controller.rb:94 msgid "Configure &ZFCP Disks" msgstr "ZFCP 디스크 구성(&Z)" -#. Initialization dialog contents -#. Initialization dialog contents +#. Initialization dialog contents +#. Initialization dialog contents #: src/clients/s390-disk-controller.rb:103 -#: src/include/s390/dasd/wizards.rb:102 - src/include/s390/zfcp/wizards.rb:98 +#: src/include/s390/dasd/wizards.rb:102 src/include/s390/zfcp/wizards.rb:98 msgid "Initializing..." msgstr "초기화 중..." -#. Command line help text for the Xcontroller module -#: src/clients/zfcp.rb:49 +#. Command line help text for the Xcontroller module +#: src/clients/zfcp.rb:49 msgid "Configuration of ZFCP" msgstr "ZFCP 구성" -#. text for installation summary -#: src/clients/zfcp_proposal.rb:46 +#. text for installation summary +#: src/clients/zfcp_proposal.rb:46 msgid "No zFCP device configured" msgstr "구성된 zFCP 장치가 없습니다." -#. section name in proposal dialog -#: src/clients/zfcp_proposal.rb:71 +#. section name in proposal dialog +#: src/clients/zfcp_proposal.rb:71 msgid "zFCP" msgstr "zFCP" -#. section name in proposal - menu item -#: src/clients/zfcp_proposal.rb:73 +#. section name in proposal - menu item +#: src/clients/zfcp_proposal.rb:73 msgid "&zFCP" msgstr "zFCP(&Z)" -#. menu button id -#: src/include/s390/dasd/dialogs.rb:170 +#. menu button id +#: src/include/s390/dasd/dialogs.rb:170 msgid "&Activate" msgstr "활성화(&A)" -#. menu button id -#: src/include/s390/dasd/dialogs.rb:172 +#. menu button id +#: src/include/s390/dasd/dialogs.rb:172 msgid "&Deactivate" msgstr "을(를) 비활성화하시겠습니까?" -#. menu button id -#. menu button id -#: src/include/s390/dasd/dialogs.rb:174 src/include/s390/dasd/dialogs.rb:183 +#. menu button id +#. menu button id +#: src/include/s390/dasd/dialogs.rb:174 src/include/s390/dasd/dialogs.rb:183 msgid "Set DIAG O&n" msgstr "DIAG 설정(&N)" -#. menu button id -#. menu button id -#: src/include/s390/dasd/dialogs.rb:176 src/include/s390/dasd/dialogs.rb:185 +#. menu button id +#. menu button id +#: src/include/s390/dasd/dialogs.rb:176 src/include/s390/dasd/dialogs.rb:185 msgid "Set DIAG O&ff" msgstr "DIAG 해제(&F)" -#. menu button id -#: src/include/s390/dasd/dialogs.rb:178 +#. menu button id +#: src/include/s390/dasd/dialogs.rb:178 msgid "&Format" msgstr "포맷(&F)" -#. menu button id -#: src/include/s390/dasd/dialogs.rb:187 +#. menu button id +#: src/include/s390/dasd/dialogs.rb:187 msgid "Set Format On" msgstr "포맷 켜기" -#. menu button id -#: src/include/s390/dasd/dialogs.rb:189 +#. menu button id +#: src/include/s390/dasd/dialogs.rb:189 msgid "Set Format Off" msgstr "포맷 끄기" -#. integer field (count of disks formatted parallel) -#: src/include/s390/dasd/dialogs.rb:201 +#. integer field (count of disks formatted parallel) +#: src/include/s390/dasd/dialogs.rb:201 msgid "&Parallel Formatted Disks" msgstr "병렬로 포맷된 디스크(&P)" -#. error popup message -#. error popup message -#. error popup message -#: src/include/s390/dasd/dialogs.rb:225 src/include/s390/dasd/dialogs.rb:687 -#: src/include/s390/zfcp/dialogs.rb:477 +#. error popup message +#. error popup message +#. error popup message +#: src/include/s390/dasd/dialogs.rb:225 src/include/s390/dasd/dialogs.rb:687 +#: src/include/s390/zfcp/dialogs.rb:477 msgid "No disk selected." msgstr "디스크를 선택하지 않았습니다." -#. 8 means disk is not formatted -#. unformtted disk, manual (not AutoYaST) -#: src/include/s390/dasd/dialogs.rb:254 src/modules/DASDController.rb:160 +#. 8 means disk is not formatted +#. unformtted disk, manual (not AutoYaST) +#: src/include/s390/dasd/dialogs.rb:254 src/modules/DASDController.rb:160 msgid "Device %1 is not formatted. Format device now?" msgstr "%1 장치가 포맷되지 않았습니다. 지금 장치를 포맷하시겠습니까?" -#: src/include/s390/dasd/dialogs.rb:256 src/modules/DASDController.rb:162 +#: src/include/s390/dasd/dialogs.rb:256 src/modules/DASDController.rb:162 msgid "There are %1 unformatted devices. Format them now?" msgstr "포맷되지 않은 %1개의 장치가 있습니다. 지금 포맷하시겠습니까?" -#. for autoinst, format unformatted disks later -#: src/include/s390/dasd/dialogs.rb:267 +#. for autoinst, format unformatted disks later +#: src/include/s390/dasd/dialogs.rb:267 msgid "Couldn't find device for channel %1." msgstr "%1 채널에 대한 장치를 찾을 수 없습니다." -#. error report, %1 is device identification -#: src/include/s390/dasd/dialogs.rb:321 +#. error report, %1 is device identification +#: src/include/s390/dasd/dialogs.rb:321 msgid "Disk %1 is not active." msgstr "%1 디스크가 활성화되지 않았습니다." -#. error report, %1 is device identification -#: src/include/s390/dasd/dialogs.rb:327 +#. error report, %1 is device identification +#: src/include/s390/dasd/dialogs.rb:327 msgid "Disk %1 is not accessible for writing." msgstr "%1 디스크에 쓰기 액세스를 할 수 없습니다." -#. popup question -#: src/include/s390/dasd/dialogs.rb:353 +#. popup question +#: src/include/s390/dasd/dialogs.rb:353 msgid "" "Formatting these disks destroys all data on them.<br>\n" "Really format the following disks?<br>\n" @@ -188,120 +187,120 @@ "포맷하시겠습니까?<br>\n" " %1" -#. Dialog caption -#: src/include/s390/dasd/dialogs.rb:416 +#. Dialog caption +#: src/include/s390/dasd/dialogs.rb:416 msgid "DASD Disk Management" msgstr "DASD 디스크 관리" -#. table header -#. table header -#. table header -#. table header -#: src/include/s390/dasd/dialogs.rb:423 src/include/s390/dasd/dialogs.rb:432 -#: src/include/s390/zfcp/dialogs.rb:120 src/include/s390/zfcp/dialogs.rb:129 +#. table header +#. table header +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:423 src/include/s390/dasd/dialogs.rb:432 +#: src/include/s390/zfcp/dialogs.rb:120 src/include/s390/zfcp/dialogs.rb:129 msgid "Channel ID" msgstr "채널 ID" -#. table header -#: src/include/s390/dasd/dialogs.rb:425 +#. table header +#: src/include/s390/dasd/dialogs.rb:425 msgid "Format" msgstr "포맷" -#. table header -#. table header -#: src/include/s390/dasd/dialogs.rb:427 src/include/s390/dasd/dialogs.rb:440 +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:427 src/include/s390/dasd/dialogs.rb:440 msgid "Use DIAG" msgstr "DIAG 사용" -#. table header -#. table header -#: src/include/s390/dasd/dialogs.rb:434 src/include/s390/zfcp/dialogs.rb:135 +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:434 src/include/s390/zfcp/dialogs.rb:135 msgid "Device" msgstr "장치" -#. table header -#. table header -#: src/include/s390/dasd/dialogs.rb:436 -#: src/include/s390/iucvterminal-server/ui.rb:242 +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:436 +#: src/include/s390/iucvterminal-server/ui.rb:242 msgid "Type" msgstr "유형" -#. table header -#: src/include/s390/dasd/dialogs.rb:438 +#. table header +#: src/include/s390/dasd/dialogs.rb:438 msgid "Access Type" msgstr "액세스 유형" -#. table header -#: src/include/s390/dasd/dialogs.rb:442 +#. table header +#: src/include/s390/dasd/dialogs.rb:442 msgid "Formatted" msgstr "포맷됨" -#. table header -#: src/include/s390/dasd/dialogs.rb:444 +#. table header +#: src/include/s390/dasd/dialogs.rb:444 msgid "Partition Information" msgstr "파티션 정보" -#. text entry -#. text entry -#: src/include/s390/dasd/dialogs.rb:455 src/include/s390/zfcp/dialogs.rb:146 +#. text entry +#. text entry +#: src/include/s390/dasd/dialogs.rb:455 src/include/s390/zfcp/dialogs.rb:146 msgid "Mi&nimum Channel ID" msgstr "최소 채널 ID(&N)" -#. text entry -#. text entry -#: src/include/s390/dasd/dialogs.rb:462 src/include/s390/zfcp/dialogs.rb:153 +#. text entry +#. text entry +#: src/include/s390/dasd/dialogs.rb:462 src/include/s390/zfcp/dialogs.rb:153 msgid "Ma&ximum Channel ID" msgstr "최대 채널 ID(&X)" -#. push button -#. push button -#: src/include/s390/dasd/dialogs.rb:468 src/include/s390/zfcp/dialogs.rb:159 +#. push button +#. push button +#: src/include/s390/dasd/dialogs.rb:468 src/include/s390/zfcp/dialogs.rb:159 msgid "&Filter" msgstr "필터(&F)" -#. menu button -#. menu button -#: src/include/s390/dasd/dialogs.rb:478 src/include/s390/dasd/dialogs.rb:485 +#. menu button +#. menu button +#: src/include/s390/dasd/dialogs.rb:478 src/include/s390/dasd/dialogs.rb:485 msgid "Perform &Action" msgstr "작업 수행(&A)" -#: src/include/s390/dasd/dialogs.rb:481 +#: src/include/s390/dasd/dialogs.rb:481 msgid "&Select All" msgstr "모두 선택(&S)" -#: src/include/s390/dasd/dialogs.rb:482 +#: src/include/s390/dasd/dialogs.rb:482 msgid "&Deselect All" msgstr "모두 선택 취소(&D)" -#. error popup -#. error popup -#: src/include/s390/dasd/dialogs.rb:553 src/include/s390/zfcp/dialogs.rb:221 +#. error popup +#. error popup +#: src/include/s390/dasd/dialogs.rb:553 src/include/s390/zfcp/dialogs.rb:221 msgid "Invalid filter channel IDs." msgstr "잘못된 필터 채널 ID입니다." -#. Dialog caption -#: src/include/s390/dasd/dialogs.rb:597 +#. Dialog caption +#: src/include/s390/dasd/dialogs.rb:597 msgid "Add New DASD Disk" msgstr "새 DASD 디스크 추가" -#. text entry -#. combo box -#: src/include/s390/dasd/dialogs.rb:608 src/include/s390/zfcp/dialogs.rb:301 +#. text entry +#. combo box +#: src/include/s390/dasd/dialogs.rb:608 src/include/s390/zfcp/dialogs.rb:301 msgid "&Channel ID" msgstr "채널 ID(&C)" -#. check box -#: src/include/s390/dasd/dialogs.rb:612 +#. check box +#: src/include/s390/dasd/dialogs.rb:612 msgid "Format the Disk" msgstr "디스크 포맷" -#. check box -#: src/include/s390/dasd/dialogs.rb:615 +#. check box +#: src/include/s390/dasd/dialogs.rb:615 msgid "Use &DIAG" msgstr "DIAG 사용(&D)" -#. yes-no popup -#: src/include/s390/dasd/dialogs.rb:637 +#. yes-no popup +#: src/include/s390/dasd/dialogs.rb:637 msgid "" "Really leave the DASD disk configuration without saving?\n" "All changes will be lost." @@ -309,23 +308,23 @@ "저장하지 않고 DASD 디스크 구성을 종료하시겠습니까?\n" "모든 변경사항이 손실됩니다." -#. error popup -#. error popup -#. error popup -#. error popup -#: src/include/s390/dasd/dialogs.rb:648 src/include/s390/zfcp/dialogs.rb:351 -#: src/include/s390/zfcp/dialogs.rb:368 src/include/s390/zfcp/dialogs.rb:404 +#. error popup +#. error popup +#. error popup +#. error popup +#: src/include/s390/dasd/dialogs.rb:648 src/include/s390/zfcp/dialogs.rb:351 +#: src/include/s390/zfcp/dialogs.rb:368 src/include/s390/zfcp/dialogs.rb:404 msgid "Not a valid channel ID." msgstr "유효한 채널 ID가 없습니다." -#. error popup -#. error popup -#: src/include/s390/dasd/dialogs.rb:658 src/include/s390/zfcp/dialogs.rb:434 +#. error popup +#. error popup +#: src/include/s390/dasd/dialogs.rb:658 src/include/s390/zfcp/dialogs.rb:434 msgid "Device already exists." msgstr "장치가 이미 존재합니다." -#. Read dialog help 1/2 -#: src/include/s390/dasd/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/s390/dasd/helps.rb:36 msgid "" "<p><b><big>Initializing Controller Configuration</big></b><br>\n" "</p>\n" @@ -333,9 +332,9 @@ "<p><b><big>컨트롤러 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#. Read dialog help 2/2 -#: src/include/s390/dasd/helps.rb:40 src/include/s390/zfcp/helps.rb:40 +#. Read dialog help 2/2 +#. Read dialog help 2/2 +#: src/include/s390/dasd/helps.rb:40 src/include/s390/zfcp/helps.rb:40 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>" @@ -343,8 +342,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "유틸리티를 안전하게 중단하려면 <b>중단</b>을 눌르십시오.</p>" -#. Write dialog help 1/2 -#: src/include/s390/dasd/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/s390/dasd/helps.rb:44 msgid "" "<p><b><big>Saving Controller Configuration</big></b><br>\n" "</p>\n" @@ -352,9 +351,9 @@ "<p><b><big>컨트롤러 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#. Write dialog help 2/2 -#: src/include/s390/dasd/helps.rb:48 src/include/s390/zfcp/helps.rb:48 +#. Write dialog help 2/2 +#. Write dialog help 2/2 +#: src/include/s390/dasd/helps.rb:48 src/include/s390/zfcp/helps.rb:48 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -364,9 +363,9 @@ "<b>중단</b>을 눌러 저장 절차를 중단합니다.\n" "추가 대화 상자에서 중단해도 안전한지 여부를 알려줍니다.</p>\n" -#. Disk selection dialog help 1/4 -#. Disk selection dialog help 1/4 -#: src/include/s390/dasd/helps.rb:54 src/include/s390/dasd/helps.rb:68 +#. Disk selection dialog help 1/4 +#. Disk selection dialog help 1/4 +#: src/include/s390/dasd/helps.rb:54 src/include/s390/dasd/helps.rb:68 msgid "" "<p><b><big>Configured DASD Disks</big></b><br>\n" "In this dialog, manage DASD disks on your system.</p>" @@ -374,9 +373,9 @@ "<p><b><big>구성된 DASD 디스크</big></b><br>\n" "이 대화 상자에서는 시스템의 DASD 디스크를 관리합니다.</p>" -#. Disk selection dialog help 2/4 -#. Disk selection dialog help 2/4 -#: src/include/s390/dasd/helps.rb:58 src/include/s390/dasd/helps.rb:72 +#. Disk selection dialog help 2/4 +#. Disk selection dialog help 2/4 +#: src/include/s390/dasd/helps.rb:58 src/include/s390/dasd/helps.rb:72 msgid "" "<p>To filter the displayed disks, set the <b>Minimum Channel ID</b> and \n" "the <b>Maximum Channel ID</b> and click <b>Filter</b>.</p>\n" @@ -384,13 +383,13 @@ "<p>표시되는 디스크를 필터링하려면 <b>최소 채널 ID</b> 및 \n" "<b>최대 채널 ID</b>를 설정하고 <b>필터</b>를 클릭하십시오.</p>\n" -#. Disk selection dialog help 4/4 -#: src/include/s390/dasd/helps.rb:62 +#. Disk selection dialog help 4/4 +#: src/include/s390/dasd/helps.rb:62 msgid "<p>To configure a new DASD disk, click <b>Add</b>.</p>" msgstr "<p>새 DASD 디스크를 구성하려면 <b>추가</b>를 클릭합니다.</p>" -#. Disk selection dialog help 4/4 -#: src/include/s390/dasd/helps.rb:64 +#. Disk selection dialog help 4/4 +#: src/include/s390/dasd/helps.rb:64 msgid "" "<p>To remove a configured DASD disk, select it and click\n" "<b>Delete</b>.</p>" @@ -398,19 +397,17 @@ "<p>구성된 DASD 디스크를 제거하려면 해당 디스크를 선택하고\n" "<b>삭제</b>를 클릭합니다.</p>" -#. Disk selection dialog help 3/4 -#: src/include/s390/dasd/helps.rb:76 +#. Disk selection dialog help 3/4 +#: src/include/s390/dasd/helps.rb:76 msgid "" -"<p>To perform actions on multiple disks at once, mark these disks. To select " -"all displayed disk (possibly after applying a filter), click\n" +"<p>To perform actions on multiple disks at once, mark these disks. To select all displayed disk (possibly after applying a filter), click\n" "<b>Select All</b> or <b>Deselect All</b>.</p>\n" msgstr "" -"<p>여러 디스크에 대한 작업을 동시에 수행하려면 해당 디스크를 표시하십시오. 필" -"터를 적용한 후 표시된 디스크를 모두 선택하려면\n" +"<p>여러 디스크에 대한 작업을 동시에 수행하려면 해당 디스크를 표시하십시오. 필터를 적용한 후 표시된 디스크를 모두 선택하려면\n" "<b>모두 선택</b> 또는 <b>모두 선택 취소</b>를 클릭하십시오.</p>\n" -#. Disk selection dialog help 4/4 -#: src/include/s390/dasd/helps.rb:80 +#. Disk selection dialog help 4/4 +#: src/include/s390/dasd/helps.rb:80 msgid "" "<p>To perform an action on the selected disks, use <b>Perform Action</b>.\n" "The action will be performed immediately!</p>" @@ -418,8 +415,8 @@ "<p>선택한 디스크에서 작업을 수행하려면 <b>작업 수행</b>을 사용합니다.\n" "작업이 즉시 수행됩니다!</p>" -#. Disk add help 1/3 -#: src/include/s390/dasd/helps.rb:84 +#. Disk add help 1/3 +#: src/include/s390/dasd/helps.rb:84 msgid "" "<p><b><big>Add New DASD Disk</big></b><br>\n" "To add a disk, enter the <b>Channel ID</b> of the DASD disk as\n" @@ -429,8 +426,8 @@ "디스크를 추가하려면 DASD 디스크의 <b>채널 ID</b>를\n" "식별자로 입력하십시오.</p>" -#. Disk add help 1/3 -#: src/include/s390/dasd/helps.rb:90 +#. Disk add help 1/3 +#: src/include/s390/dasd/helps.rb:90 msgid "" "<p>If the disk should be formatted,\n" "use <b>Format the Disk</b>.</p>\n" @@ -438,67 +435,55 @@ "<p>디스크를 포맷해야 하는 경우\n" "<b>디스크 포맷</b>을 사용하십시오.</p>\n" -#. Disk add help 3/3 -#: src/include/s390/dasd/helps.rb:94 +#. Disk add help 3/3 +#: src/include/s390/dasd/helps.rb:94 msgid "<p>To use DIAG mode, select <b>Use DIAG</b>.</p>\n" msgstr "<p>DIAG 모드를 사용하려면 <b>DIAG 사용</b>을 선택하십시오.</p>\n" -#. Initialization dialog caption -#. Initialization dialog caption -#: src/include/s390/dasd/wizards.rb:100 src/include/s390/zfcp/wizards.rb:96 +#. Initialization dialog caption +#. Initialization dialog caption +#: src/include/s390/dasd/wizards.rb:100 src/include/s390/zfcp/wizards.rb:96 msgid "Controller Configuration" msgstr "컨트롤러 구성" -#. Run the dialog for Dump -#. @param what symbol a -#. @return [Symbol] EditDumpDialog that was edited -#: src/include/s390/dump/ui.rb:47 +#. Run the dialog for Dump +#. @param what symbol a +#. @return [Symbol] EditDumpDialog that was edited +#: src/include/s390/dump/ui.rb:47 msgid "Create Dump Device" msgstr "덤프 장치 생성" -#. Dump dialog help 1/8 -#: src/include/s390/dump/ui.rb:50 +#. Dump dialog help 1/8 +#: src/include/s390/dump/ui.rb:50 msgid "<p><b>Prepare one or more volumes for use as S/390 dump device.</b></p>" -msgstr "" -"<p><b>S/390 덤프 장치로 사용할 하나 이상의 볼륨을 준비하십시오.</b></p>" +msgstr "<p><b>S/390 덤프 장치로 사용할 하나 이상의 볼륨을 준비하십시오.</b></p>" -#. Dump dialog help 2/8 -#: src/include/s390/dump/ui.rb:54 -msgid "" -"<p>Supported devices are ECKD DASD and ZFCP disks, while multi-volumes are " -"limited to DASD.<br>" -msgstr "" -"<p>지원되는 장치는 ECKD DASD 및 ZFCP 디스크이지만, 다중 볼륨은 DASD로 제한됩" -"니다.<br>" +#. Dump dialog help 2/8 +#: src/include/s390/dump/ui.rb:54 +msgid "<p>Supported devices are ECKD DASD and ZFCP disks, while multi-volumes are limited to DASD.<br>" +msgstr "<p>지원되는 장치는 ECKD DASD 및 ZFCP 디스크이지만, 다중 볼륨은 DASD로 제한됩니다.<br>" -#. Dump dialog help 3/8 -#: src/include/s390/dump/ui.rb:58 +#. Dump dialog help 3/8 +#: src/include/s390/dump/ui.rb:58 msgid "" "Only whole disks can be used, no partitions. If the device is incompatibly\n" -"formatted or partitioned, activate the checkbox <b>Force overwrite of disk.</p>" +"formatted or partitioned, activate the checkbox <b>Force overwrite of disk</b>.</p>" msgstr "" "파티션 없이 전체 디스크만 사용할 수 있습니다. 장치가 호환되지 않게\n" -"포맷 또는 분할된 경우 <b>강제 디스크 덮어쓰기</b> 확인란을 활성화하십시오." +"포맷 또는 분할된 경우 <b>강제 디스크 덮어쓰기</b> 확인란을 활성화하십시오.</p>" -#. Dump dialog help 4/8 -#: src/include/s390/dump/ui.rb:62 -msgid "" -"<p>To use DASD and ZFCP devices activate them in the respective YaST DASD or " -"ZFCP dialog.<br>" -msgstr "" -"<p>DASD 및 ZFCP 장치를 사용하려면 해당 YaST DASD 또는 ZFCP 대화 상자에서 활성" -"화하십시오.<br>" +#. Dump dialog help 4/8 +#: src/include/s390/dump/ui.rb:62 +msgid "<p>To use DASD and ZFCP devices activate them in the respective YaST DASD or ZFCP dialog.<br>" +msgstr "<p>DASD 및 ZFCP 장치를 사용하려면 해당 YaST DASD 또는 ZFCP 대화 상자에서 활성화하십시오.<br>" -#. Dump dialog help 5/8 -#: src/include/s390/dump/ui.rb:66 -msgid "" -"Devices which are in use or have mounted partitions will not be shown.</p>" +#. Dump dialog help 5/8 +#: src/include/s390/dump/ui.rb:66 +msgid "Devices which are in use or have mounted partitions will not be shown.</p>" msgstr "사용 중이거나 탑재된 파티션이 있는 장치는 표시되지 않습니다.</p>" -#. Dump dialog help 6/8 -#: src/include/s390/dump/ui.rb:70 +#. Dump dialog help 6/8 +#: src/include/s390/dump/ui.rb:70 msgid "" "<p><b>dumpdevice</b> after a disk indicates that it is a usable dump\n" "device. Multi-volume dump devices are indicated by a list of DASD IDs.</p>" @@ -506,50 +491,46 @@ "<p>디스크 뒤의 <b>dumpdevice</b>는 사용 가능한 덤프\n" "장치임을 나타냅니다. 다중 볼륨 덤프 장치는 DASD ID 목록으로 표시됩니다.</p>" -#. Dump dialog help 7/8 -#: src/include/s390/dump/ui.rb:74 +#. Dump dialog help 7/8 +#: src/include/s390/dump/ui.rb:74 msgid "<p>ZFCP columns: Device, Size, ID, WWPN, LUN, Dump<br>" msgstr "<p>ZFCP 열: 장치, 크기, ID, WWPN, LUN, 덤프<br>" -#. Dump dialog help 8/8 -#: src/include/s390/dump/ui.rb:76 +#. Dump dialog help 8/8 +#: src/include/s390/dump/ui.rb:76 msgid "DASD columns: Device, Size, ID, Dump</p>" msgstr "DASD 열: 장치, 크기, ID, 덤프</p>" -#. Dialog content -#: src/include/s390/dump/ui.rb:95 +#. Dialog content +#: src/include/s390/dump/ui.rb:95 msgid "&ZFCP" msgstr "ZFCP(&Z)" -#: src/include/s390/dump/ui.rb:121 +#: src/include/s390/dump/ui.rb:121 msgid "&Force overwrite of disk" msgstr "강제 디스크 덮어쓰기(&F)" -#. prevent leading space -#: src/include/s390/dump/ui.rb:185 +#. prevent leading space +#: src/include/s390/dump/ui.rb:185 msgid "You haven't selected any device." msgstr "장치를 선택하지 않았습니다." -#. warn only in case of force -#: src/include/s390/dump/ui.rb:193 -msgid "" -"The disk %1 will be formatted as a dump device. All data on this device will " -"be lost! Continue?" -msgstr "" -"디스크 %1은(는) 덤프 장치로 포맷됩니다. 이 장치의 모든 데이터는 유실됩니다! " -"계속하시겠습니까?" +#. warn only in case of force +#: src/include/s390/dump/ui.rb:193 +msgid "The disk %1 will be formatted as a dump device. All data on this device will be lost! Continue?" +msgstr "디스크 %1은(는) 덤프 장치로 포맷됩니다. 이 장치의 모든 데이터는 유실됩니다! 계속하시겠습니까?" -#. don't quit in case of failures, error messages are reported by FormatDisk() -#: src/include/s390/dump/ui.rb:203 +#. don't quit in case of failures, error messages are reported by FormatDisk() +#: src/include/s390/dump/ui.rb:203 msgid "Operation successful. Initialize another dump device?" msgstr "작업 성공. 다른 덤프 장치를 초기화하시겠습니까?" -#. z/VM IDs dialog help 1/1 -#: src/include/s390/iucvterminal-server/helps.rb:36 +#. z/VM IDs dialog help 1/1 +#: src/include/s390/iucvterminal-server/helps.rb:36 msgid "<p><b><big>z/VM IDs</big></b></p>" msgstr "<p><b><big>z/VM ID</big></b></p>" -#: src/include/s390/iucvterminal-server/helps.rb:39 +#: src/include/s390/iucvterminal-server/helps.rb:39 msgid "" "<p>To configure the IUCV terminal server, specify the z/VM IDs to be used.\n" "<br>They are separated by line breaks.</p>\n" @@ -557,32 +538,22 @@ "<p>IUCV 터미널 서버를 구성하려면 사용할 z/VM ID를 지정하십시오.\n" "<br>줄 바꿈으로 구분됩니다.</p>\n" -#. TS-Shell dialog help 1/5 -#: src/include/s390/iucvterminal-server/helps.rb:43 +#. TS-Shell dialog help 1/5 +#: src/include/s390/iucvterminal-server/helps.rb:43 msgid "<p><b><big>TS-Shell</big></b></p>" msgstr "<p><b><big>TS 셸</big></b></p>" -#: src/include/s390/iucvterminal-server/helps.rb:46 -msgid "" -"<p>TS-Shell allows to specify <b>Authorization</b> for every TS-Shell user " -"and group. The rights of a group are inherited by its members.</p>" -msgstr "" -"<p>TS-Shell을 사용하면 모든 TS-Shell 사용자 및 그룹에 대해 <b>인증</b>을 지정" -"할 수 있습니다. 그룹 권한은 모든 구성원에게 상속됩니다.</p>" +#: src/include/s390/iucvterminal-server/helps.rb:46 +msgid "<p>TS-Shell allows to specify <b>Authorization</b> for every TS-Shell user and group. The rights of a group are inherited by its members.</p>" +msgstr "<p>TS-Shell을 사용하면 모든 TS-Shell 사용자 및 그룹에 대해 <b>인증</b>을 지정할 수 있습니다. 그룹 권한은 모든 구성원에게 상속됩니다.</p>" -#. TS-Shell dialog help 2/5 -#: src/include/s390/iucvterminal-server/helps.rb:50 -msgid "" -"<p>Each allowed z/VM ID can be selected manually under <b>Selection</b>, " -"defined by a <b>Regex</b> or loaded from a <b>File</b> which contains all " -"allowed z/VM IDs separated by line breaks.</p>" -msgstr "" -"허용되는 각 z/VM ID는 <b>선택</b> 아래에서 수동으로 선택하거나, <b>Regex</b>" -"에 의해 정의되거나, <p>줄 바꿈으로 구분된 허용되는 모든 z/VM ID가 포함된 <b>" -"파일</b>에서 로드될 수 있습니다.</p>" +#. TS-Shell dialog help 2/5 +#: src/include/s390/iucvterminal-server/helps.rb:50 +msgid "<p>Each allowed z/VM ID can be selected manually under <b>Selection</b>, defined by a <b>Regex</b> or loaded from a <b>File</b> which contains all allowed z/VM IDs separated by line breaks.</p>" +msgstr "허용되는 각 z/VM ID는 <b>선택</b> 아래에서 수동으로 선택하거나, <b>Regex</b>에 의해 정의되거나, <p>줄 바꿈으로 구분된 허용되는 모든 z/VM ID가 포함된 <b>파일</b>에서 로드될 수 있습니다.</p>" -#. TS-Shell dialog help 3/5 -#: src/include/s390/iucvterminal-server/helps.rb:54 +#. TS-Shell dialog help 3/5 +#: src/include/s390/iucvterminal-server/helps.rb:54 msgid "" "<p>Click on <b>New User</b> to create new TS-Shell users or <b>Delete\n" "User</b> to remove users.</p>" @@ -590,52 +561,40 @@ "<p>새 TS-Shell 사용자를 생성하려면 <b>새 사용자</b>를 클릭하고,\n" "사용자를 제거하려면 <b>사용자 삭제</b>를 클릭하십시오.</p>" -#. TS-Shell dialog help 4/5 -#: src/include/s390/iucvterminal-server/helps.rb:58 +#. TS-Shell dialog help 4/5 +#: src/include/s390/iucvterminal-server/helps.rb:58 msgid "" -"<p>To add or remove groups from the TS-Shell authorization table or to " -"change\n" +"<p>To add or remove groups from the TS-Shell authorization table or to change\n" "the membership of users, go to <b>Manage Groups</b>.</p>" msgstr "" "<p>TS-Shell 인증 테이블에서 그룹을 추가 또는 제거하거나\n" "사용자 멤버쉽을 변경하려면 <b>그룹 관리</b>로 이동하십시오.</p>" -#. TS-Shell dialog help 5/5 -#: src/include/s390/iucvterminal-server/helps.rb:62 -msgid "" -"<p>With <b>Audited IDs</b> specify the z/VM IDs from which transcripts " -"should be gathered.</p>" -msgstr "" -"<p><b>감사된 ID</b>를 사용하여 기록을 수집해야 하는 z/VM ID를 지정하십시오." +#. TS-Shell dialog help 5/5 +#: src/include/s390/iucvterminal-server/helps.rb:62 +msgid "<p>With <b>Audited IDs</b> specify the z/VM IDs from which transcripts should be gathered.</p>" +msgstr "<p><b>감사된 ID</b>를 사용하여 기록을 수집해야 하는 z/VM ID를 지정하십시오.</p>" -#. TS-Shell User creation dialog help 1/3 -#: src/include/s390/iucvterminal-server/helps.rb:66 +#. TS-Shell User creation dialog help 1/3 +#: src/include/s390/iucvterminal-server/helps.rb:66 msgid "<p><b><big>New TS-Shell User</big></b></p>" msgstr "<p><b><big>새 TS 셸 사용자</big></b></p>" -#: src/include/s390/iucvterminal-server/helps.rb:69 +#: src/include/s390/iucvterminal-server/helps.rb:69 msgid "" -"<p>To create new TS-Shell user the <b>Username</b>, <b>Home Directory</b> " -"and <b>Password</b> has to be provided.\n" -"\t<br>It is also possible to specify <b>Additional Groups</b> by selecting " -"them on the right.</p>" +"<p>To create new TS-Shell user the <b>Username</b>, <b>Home Directory</b> and <b>Password</b> has to be provided.\n" +"\t<br>It is also possible to specify <b>Additional Groups</b> by selecting them on the right.</p>" msgstr "" -"<p>새 TS 셸 사용자를 생성하려면 <b>사용자 이름</b>, <b>홈 디렉토리</b> 및 <b>" -"비밀번호</b>를 제공해야 합니다.\n" +"<p>새 TS 셸 사용자를 생성하려면 <b>사용자 이름</b>, <b>홈 디렉토리</b> 및 <b>비밀번호</b>를 제공해야 합니다.\n" "\t<br>오른쪽에서 <b>추가 그룹</b>을 선택하여 지정할 수도 있습니다.</p>" -#. TS-Shell User creation dialog help 2/3 -#: src/include/s390/iucvterminal-server/helps.rb:73 -msgid "" -"<p>To ensure that the user changes his password after the first login, " -"activate <b>Force Password Change</b>.</p>" -msgstr "" -"<p>사용자가 처음 로그인한 후 비밀번호를 변경하게 하려면 <b>강제 비밀번호 변경" -"</b>을 활성화하십시오.</p>" +#. TS-Shell User creation dialog help 2/3 +#: src/include/s390/iucvterminal-server/helps.rb:73 +msgid "<p>To ensure that the user changes his password after the first login, activate <b>Force Password Change</b>.</p>" +msgstr "<p>사용자가 처음 로그인한 후 비밀번호를 변경하게 하려면 <b>강제 비밀번호 변경</b>을 활성화하십시오.</p>" -#. TS-Shell User creation dialog help 3/3 -#: src/include/s390/iucvterminal-server/helps.rb:77 +#. TS-Shell User creation dialog help 3/3 +#: src/include/s390/iucvterminal-server/helps.rb:77 msgid "" "<p>You can specify the same home directory for every TS-Shell user since no\n" "data will be stored there.</p>" @@ -643,12 +602,12 @@ "<p>데이터가 저장되지 않으므로 모든 TS-Shell 사용자에 대해\n" "동일한 홈 디렉토리를 지정할 수 있습니다.</p>" -#. TS-Shell Managing Groups dialog help 1/5 -#: src/include/s390/iucvterminal-server/helps.rb:81 +#. TS-Shell Managing Groups dialog help 1/5 +#: src/include/s390/iucvterminal-server/helps.rb:81 msgid "<p><b><big>Manage Groups for TS-Authorization</big></b></p>" msgstr "<p><b><big>TS 인증 그룹 관리</big></b></p>" -#: src/include/s390/iucvterminal-server/helps.rb:84 +#: src/include/s390/iucvterminal-server/helps.rb:84 msgid "" "<p>Define TS-Shell authorizations per group if you want every TS-Shell \n" "member of this groups to inherit the same rights.</p>" @@ -656,19 +615,17 @@ "<p>이 그룹의 모든 TS-Shell 구성원이 동일한 권한을 상속하게 하려면 \n" "그룹별로 TS-Shell 인증을 정의하십시오.</p>" -#. TS-Shell Managing Groups dialog help 2/5 -#: src/include/s390/iucvterminal-server/helps.rb:88 +#. TS-Shell Managing Groups dialog help 2/5 +#: src/include/s390/iucvterminal-server/helps.rb:88 msgid "" "<p>Existing groups can be added to or removed from the TS-Shell\n" -"authorization. Select the groups in the table and click on <b>Select or " -"Deselect</b>. The current status is shown in the column <b>TS-Auth</b>.</p>" +"authorization. Select the groups in the table and click on <b>Select or Deselect</b>. The current status is shown in the column <b>TS-Auth</b>.</p>" msgstr "" "<p>TS-Shell 인증에서 기존 그룹을 추가하거나\n" -"제거할 수 있습니다. 테이블에서 그룹을 선택하고 <b>선택 또는 선택 취소</b>를 " -"클릭하십시오. 현재 상태가 <b>TS-Auth</b> 열에 표시됩니다.</p>" +"제거할 수 있습니다. 테이블에서 그룹을 선택하고 <b>선택 또는 선택 취소</b>를 클릭하십시오. 현재 상태가 <b>TS-Auth</b> 열에 표시됩니다.</p>" -#. TS-Shell Managing Groups dialog help 3/5 -#: src/include/s390/iucvterminal-server/helps.rb:92 +#. TS-Shell Managing Groups dialog help 3/5 +#: src/include/s390/iucvterminal-server/helps.rb:92 msgid "" "<p>Change TS-Shell members of a selected group in the <b>TS-Members</b>\n" "selection.</p>" @@ -676,649 +633,565 @@ "<p><b>TS-Members</b> 선택에서 선택한 그룹의 TS-Shell 구성원을\n" "변경하십시오.</p>" -#. TS-Shell Managing Groups dialog help 4/5 -#: src/include/s390/iucvterminal-server/helps.rb:96 +#. TS-Shell Managing Groups dialog help 4/5 +#: src/include/s390/iucvterminal-server/helps.rb:96 msgid "" -"<p>New groups could be created by entering the name in the <b>New Group</b> " -"input field and confirming with <b>Create</b>.\n" -"\t<br>To delete previously created groups the <b>YaST users</b> dialog has " -"to be used.</p>" +"<p>New groups could be created by entering the name in the <b>New Group</b> input field and confirming with <b>Create</b>.\n" +"\t<br>To delete previously created groups the <b>YaST users</b> dialog has to be used.</p>" msgstr "" -"<p><b>새 그룹</b> 입력 필드에 이름을 입력하고 <b>생성</b>을 선택하여 확인하" -"면 새 그룹을 생성할 수 있습니다.\n" -"\t<br>이전에 생성된 그룹을 삭제하려면 <b>YaST 사용자</b> 대화 상자를 사용해" -"야 합니다.</p>" +"<p><b>새 그룹</b> 입력 필드에 이름을 입력하고 <b>생성</b>을 선택하여 확인하면 새 그룹을 생성할 수 있습니다.\n" +"\t<br>이전에 생성된 그룹을 삭제하려면 <b>YaST 사용자</b> 대화 상자를 사용해야 합니다.</p>" -#. TS-Shell Managing Groups dialog help 5/5 -#: src/include/s390/iucvterminal-server/helps.rb:100 +#. TS-Shell Managing Groups dialog help 5/5 +#: src/include/s390/iucvterminal-server/helps.rb:100 msgid "<p>Undo changes in this dialog by clicking the <b>Back</b> button.</p>" -msgstr "" -"<p><b>뒤로</b> 버튼을 클릭하여 이 대화 상자의 변경사항을 실행 취소하십시오." +msgstr "<p><b>뒤로</b> 버튼을 클릭하여 이 대화 상자의 변경사항을 실행 취소하십시오.</p>" -#. IUCVConn on Login dialog help 1/2 -#: src/include/s390/iucvterminal-server/helps.rb:104 +#. IUCVConn on Login dialog help 1/2 +#: src/include/s390/iucvterminal-server/helps.rb:104 msgid "<p><b><big>IUCVConn on Login</big></b></p>" msgstr "<p><b><big>로그인 시 IUCVConn</big></b></p>" -#: src/include/s390/iucvterminal-server/helps.rb:107 -msgid "" -"<p>IUCVConn on Login needs one user for every z/VM ID. To create these users " -"a <b>password</b> and <b>home directory</b> has to be provided." -msgstr "" -"<p>로그인 시 IUCVConn에는 각 z/VM ID에 대한 하나의 사용자가 있어야 합니다. 이" -"러한 사용자를 만들려면 <b>비밀번호</b> 및 <b>홈 디렉토리</b>가 제공되어야 합" -"니다." +#: src/include/s390/iucvterminal-server/helps.rb:107 +msgid "<p>IUCVConn on Login needs one user for every z/VM ID. To create these users a <b>password</b> and <b>home directory</b> has to be provided." +msgstr "<p>로그인 시 IUCVConn에는 각 z/VM ID에 대한 하나의 사용자가 있어야 합니다. 이러한 사용자를 만들려면 <b>비밀번호</b> 및 <b>홈 디렉토리</b>가 제공되어야 합니다." -#. IUCVConn on Login dialog help 2/2 -#: src/include/s390/iucvterminal-server/helps.rb:111 -msgid "" -"<p>It is possible to sync the users manually by clicking on <b>Sync</b> or " -"just confirming the changes with <b>Ok</b> while <b>IUCVConn on Login</b> is " -"enabled. </p>" -msgstr "" -"<p><b>로그인 시 IUCVConn</b>이 선택된 경우 <b>동기화</b>를 클릭하거나 <b>확인" -"</b>을 눌러 변경 사항을 확인하면 수동으로 사용자를 동기화할 수 있습니다. </p>" +#. IUCVConn on Login dialog help 2/2 +#: src/include/s390/iucvterminal-server/helps.rb:111 +msgid "<p>It is possible to sync the users manually by clicking on <b>Sync</b> or just confirming the changes with <b>Ok</b> while <b>IUCVConn on Login</b> is enabled. </p>" +msgstr "<p><b>로그인 시 IUCVConn</b>이 선택된 경우 <b>동기화</b>를 클릭하거나 <b>확인</b>을 눌러 변경 사항을 확인하면 수동으로 사용자를 동기화할 수 있습니다. </p>" -#. Text approval -#: src/include/s390/iucvterminal-server/ui.rb:54 +#. Text approval +#: src/include/s390/iucvterminal-server/ui.rb:54 msgid "Yes" msgstr "확인" -#. Text disapproval -#: src/include/s390/iucvterminal-server/ui.rb:57 +#. Text disapproval +#: src/include/s390/iucvterminal-server/ui.rb:57 msgid "No" msgstr "취소" -#. Text for category user -#: src/include/s390/iucvterminal-server/ui.rb:60 +#. Text for category user +#: src/include/s390/iucvterminal-server/ui.rb:60 msgid "user" msgstr "사용자" -#. Text for category group -#: src/include/s390/iucvterminal-server/ui.rb:63 +#. Text for category group +#: src/include/s390/iucvterminal-server/ui.rb:63 msgid "group" msgstr "그룹" -#. filter non ts users -#: src/include/s390/iucvterminal-server/ui.rb:200 +#. filter non ts users +#: src/include/s390/iucvterminal-server/ui.rb:200 msgid "z/&VM IDs (auto-sorted)" msgstr "z/VM ID(자동 정렬됨)(&V)" -#: src/include/s390/iucvterminal-server/ui.rb:219 +#: src/include/s390/iucvterminal-server/ui.rb:219 msgid "&Enable TS-Shell" msgstr "TS 셸 활성화(&E)" -#: src/include/s390/iucvterminal-server/ui.rb:229 +#: src/include/s390/iucvterminal-server/ui.rb:229 msgid "Authorization" msgstr "인증" -#. table header -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:244 -#: src/include/s390/iucvterminal-server/ui.rb:545 +#. table header +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:244 +#: src/include/s390/iucvterminal-server/ui.rb:545 msgid "Name" msgstr "이름" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:246 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:246 msgid "UID/GID" msgstr "UID/GID" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:248 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:248 msgid "Groups/Members" msgstr "그룹/구성원" -#: src/include/s390/iucvterminal-server/ui.rb:253 +#: src/include/s390/iucvterminal-server/ui.rb:253 msgid "&New User" msgstr "새 사용자(&N)" -#: src/include/s390/iucvterminal-server/ui.rb:255 +#: src/include/s390/iucvterminal-server/ui.rb:255 msgid "&Delete User" msgstr "사용자 삭제(&D)" -#: src/include/s390/iucvterminal-server/ui.rb:259 +#: src/include/s390/iucvterminal-server/ui.rb:259 msgid "&Manage Groups" msgstr "그룹 관리(&M)" -#: src/include/s390/iucvterminal-server/ui.rb:270 +#: src/include/s390/iucvterminal-server/ui.rb:270 msgid "Allowed z/VM IDs" msgstr "허용된 z/VM ID" -#: src/include/s390/iucvterminal-server/ui.rb:285 +#: src/include/s390/iucvterminal-server/ui.rb:285 msgid "&Selection" msgstr "선택(&S)" -#. force min size to make it easier readable in terminals -#: src/include/s390/iucvterminal-server/ui.rb:306 +#. force min size to make it easier readable in terminals +#: src/include/s390/iucvterminal-server/ui.rb:306 msgid "&Regex" msgstr "정규식(&R)" -#: src/include/s390/iucvterminal-server/ui.rb:323 +#: src/include/s390/iucvterminal-server/ui.rb:323 msgid "&File" msgstr "파일(&F)" -#: src/include/s390/iucvterminal-server/ui.rb:339 +#: src/include/s390/iucvterminal-server/ui.rb:339 msgid "Bro&wse" msgstr "찾아보기(&W)" -#. force min size to make it easier readable in terminals -#: src/include/s390/iucvterminal-server/ui.rb:366 +#. force min size to make it easier readable in terminals +#: src/include/s390/iucvterminal-server/ui.rb:366 msgid "&Audited IDs" msgstr "감사된 ID(&A)" -#: src/include/s390/iucvterminal-server/ui.rb:388 +#: src/include/s390/iucvterminal-server/ui.rb:388 msgid "&Enable IUCVConn on Login" msgstr "로그인 시 IUCVConn 활성화(&E)" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:401 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:401 msgid "Login" msgstr "로그인" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:403 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:403 msgid "UID" msgstr "UID" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:405 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:405 msgid "Home" msgstr "홈" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:407 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:407 msgid "Shell" msgstr "셸" -#: src/include/s390/iucvterminal-server/ui.rb:415 +#: src/include/s390/iucvterminal-server/ui.rb:415 msgid "Settings for new Users" msgstr "새 사용자 설정" -#: src/include/s390/iucvterminal-server/ui.rb:421 -#: src/include/s390/iucvterminal-server/ui.rb:496 +#: src/include/s390/iucvterminal-server/ui.rb:421 +#: src/include/s390/iucvterminal-server/ui.rb:496 msgid "&Password" msgstr "비밀번호(&P)" -#: src/include/s390/iucvterminal-server/ui.rb:430 -#: src/include/s390/iucvterminal-server/ui.rb:502 +#: src/include/s390/iucvterminal-server/ui.rb:430 +#: src/include/s390/iucvterminal-server/ui.rb:502 msgid "Co&nfirm Password" msgstr "비밀번호 확인(&N)" -#: src/include/s390/iucvterminal-server/ui.rb:445 -#: src/include/s390/iucvterminal-server/ui.rb:487 +#: src/include/s390/iucvterminal-server/ui.rb:445 +#: src/include/s390/iucvterminal-server/ui.rb:487 msgid "&Home Directory" msgstr "홈 디렉토리(&H)" -#: src/include/s390/iucvterminal-server/ui.rb:448 -#: src/include/s390/iucvterminal-server/ui.rb:491 +#: src/include/s390/iucvterminal-server/ui.rb:448 +#: src/include/s390/iucvterminal-server/ui.rb:491 msgid "B&rowse" msgstr "찾아보기(&R)" -#: src/include/s390/iucvterminal-server/ui.rb:452 +#: src/include/s390/iucvterminal-server/ui.rb:452 msgid "&Sync" msgstr "동기화(&S)" -#. initialize list with additional groups -#: src/include/s390/iucvterminal-server/ui.rb:479 +#. initialize list with additional groups +#: src/include/s390/iucvterminal-server/ui.rb:479 msgid "&Username" msgstr "사용자 이름(&U)" -#: src/include/s390/iucvterminal-server/ui.rb:509 +#: src/include/s390/iucvterminal-server/ui.rb:509 msgid "&Force Password Change" msgstr "강제 비밀번호 변경(&F)" -#: src/include/s390/iucvterminal-server/ui.rb:522 +#: src/include/s390/iucvterminal-server/ui.rb:522 msgid "&Additonal Groups" msgstr "추가 그룹(&A)" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:547 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:547 msgid "TS-Auth" msgstr "TS 인증" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:549 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:549 msgid "GID" msgstr "GID" -#. table header -#: src/include/s390/iucvterminal-server/ui.rb:551 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:551 msgid "TS-Members" msgstr "TS 구성원" -#: src/include/s390/iucvterminal-server/ui.rb:556 +#: src/include/s390/iucvterminal-server/ui.rb:556 msgid "&Select or Deselect" msgstr "선택 또는 해제(&S)" -#: src/include/s390/iucvterminal-server/ui.rb:558 +#: src/include/s390/iucvterminal-server/ui.rb:558 msgid "C&reate" msgstr "생성(&R)" -#: src/include/s390/iucvterminal-server/ui.rb:560 +#: src/include/s390/iucvterminal-server/ui.rb:560 msgid "&New Group" msgstr "새 그룹(&N)" -#: src/include/s390/iucvterminal-server/ui.rb:570 +#: src/include/s390/iucvterminal-server/ui.rb:570 msgid "TS-&Members" msgstr "TS 구성원(&M)" -#. draw active tab -#: src/include/s390/iucvterminal-server/ui.rb:595 +#. draw active tab +#: src/include/s390/iucvterminal-server/ui.rb:595 msgid "&z/VM IDs" msgstr "z/VM ID(&Z)" -#: src/include/s390/iucvterminal-server/ui.rb:596 +#: src/include/s390/iucvterminal-server/ui.rb:596 msgid "&TS-Shell" msgstr "TS 셸(&T)" -#: src/include/s390/iucvterminal-server/ui.rb:597 +#: src/include/s390/iucvterminal-server/ui.rb:597 msgid "&IUCVConn" msgstr "IUCVConn(&I)" -#. check and commit password -#: src/include/s390/iucvterminal-server/ui.rb:711 +#. check and commit password +#: src/include/s390/iucvterminal-server/ui.rb:711 msgid "The passwords do not match or are invalid." msgstr "비밀번호가 일치하지 않거나 잘못되었습니다." -#. check if the user specifcation is valid and if the name does already exist -#: src/include/s390/iucvterminal-server/ui.rb:717 +#. check if the user specifcation is valid and if the name does already exist +#: src/include/s390/iucvterminal-server/ui.rb:717 msgid "The username is not valid!" msgstr "사용자 이름이 올바르지 않습니다." -#: src/include/s390/iucvterminal-server/ui.rb:721 +#: src/include/s390/iucvterminal-server/ui.rb:721 msgid "A home directory has to be specified!" msgstr "홈 디렉토리를 지정해야 합니다." -#: src/include/s390/iucvterminal-server/ui.rb:757 +#: src/include/s390/iucvterminal-server/ui.rb:757 msgid "Adding the user has failed." msgstr "사용자를 추가하지 못했습니다." -#. delete group entry if disabled -#: src/include/s390/iucvterminal-server/ui.rb:861 +#. delete group entry if disabled +#: src/include/s390/iucvterminal-server/ui.rb:861 msgid "Configure IUCV Terminal Server Settings" msgstr "IUCV 터미널 서버 설정 구성" -#. update screen -#: src/include/s390/iucvterminal-server/ui.rb:881 +#. update screen +#: src/include/s390/iucvterminal-server/ui.rb:881 msgid "New TS-Shell User" msgstr "새 TS 셸 사용자" -#: src/include/s390/iucvterminal-server/ui.rb:894 +#: src/include/s390/iucvterminal-server/ui.rb:894 msgid "Manage Groups for TS-Authorization" msgstr "TS 인증 그룹 관리" -#. since alnum allows umlauts too the id is checked against the user name specification -#: src/include/s390/iucvterminal-server/ui.rb:1020 +#. since alnum allows umlauts too the id is checked against the user name specification +#: src/include/s390/iucvterminal-server/ui.rb:1020 msgid "Wrong z/VM ID \"%1\" in line %2, only letters and numbers are allowed." -msgstr "" -"z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 글자와 숫자만 사용할 수 있습니다." +msgstr "z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 글자와 숫자만 사용할 수 있습니다." -#: src/include/s390/iucvterminal-server/ui.rb:1032 -msgid "" -"Wrong z/VM ID \"%1\" in line %2, numbers at the beginning are not allowed." +#: src/include/s390/iucvterminal-server/ui.rb:1032 +msgid "Wrong z/VM ID \"%1\" in line %2, numbers at the beginning are not allowed." msgstr "z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 숫자로 시작할 수 없습니다." -#: src/include/s390/iucvterminal-server/ui.rb:1044 -msgid "" -"Wrong z/VM ID \"%1\" in line %2, more than eight characters are not allowed." -msgstr "" -"z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 8자 이하를 사용해야 합니다." +#: src/include/s390/iucvterminal-server/ui.rb:1044 +msgid "Wrong z/VM ID \"%1\" in line %2, more than eight characters are not allowed." +msgstr "z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 8자 이하를 사용해야 합니다." -#. only the last entry is allowed to be empty -#: src/include/s390/iucvterminal-server/ui.rb:1057 +#. only the last entry is allowed to be empty +#: src/include/s390/iucvterminal-server/ui.rb:1057 msgid "Wrong z/VM ID \"%1\" in line %2, at least one letter is required." -msgstr "" -"z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 하나 이상의 글자를 사용해야 합니" -"다." +msgstr "z/VM ID \"%1\"(%2 행)이(가) 잘못되었습니다. 하나 이상의 글자를 사용해야 합니다." -#. check password -#: src/include/s390/iucvterminal-server/ui.rb:1081 +#. check password +#: src/include/s390/iucvterminal-server/ui.rb:1081 msgid "A correctly entered password to sync IUCVConn users is required." msgstr "IUCVConn 사용자를 동기화하려면 비밀번호를 올바르게 입력해야 합니다." -#. check home directory -#: src/include/s390/iucvterminal-server/ui.rb:1087 +#. check home directory +#: src/include/s390/iucvterminal-server/ui.rb:1087 msgid "The specified IUCVConn home directory is invalid." msgstr "지정된 IUCVConn 홈 디렉토리가 잘못되었습니다." -#. update ts member selection -#: src/include/s390/iucvterminal-server/ui.rb:1437 +#. update ts member selection +#: src/include/s390/iucvterminal-server/ui.rb:1437 msgid "The group name is not valid!" msgstr "그룹 이름이 올바르지 않습니다." -#. change tab selection back -#. check for z/VM ID entries -#: src/include/s390/iucvterminal-server/ui.rb:1497 -#: src/include/s390/iucvterminal-server/ui.rb:1598 +#. change tab selection back +#. check for z/VM ID entries +#: src/include/s390/iucvterminal-server/ui.rb:1497 +#: src/include/s390/iucvterminal-server/ui.rb:1598 msgid "Cannot configure the terminal server without valid z/VM IDs." msgstr "유효한 z/VM ID가 없으면 터미널 서버를 구성할 수 없습니다." -#. Check the "Allowed Terminal Server list" field for validity. -#. @return true for valid inputs -#: src/include/s390/iucvterminal/ui.rb:55 -msgid "" -"Wrong input, only lower case letters, numbers and for separation commas are " -"allowed." +#. Check the "Allowed Terminal Server list" field for validity. +#. @return true for valid inputs +#: src/include/s390/iucvterminal/ui.rb:55 +msgid "Wrong input, only lower case letters, numbers and for separation commas are allowed." msgstr "입력이 잘못되었습니다. 소문자, 숫자 및 구분 쉼표만 사용할 수 있습니다." -#: src/include/s390/iucvterminal/ui.rb:60 +#: src/include/s390/iucvterminal/ui.rb:60 msgid "Comma is only a separator." msgstr "쉼표는 구분자일 뿐입니다." -#: src/include/s390/iucvterminal/ui.rb:62 +#: src/include/s390/iucvterminal/ui.rb:62 msgid "z/VM IDs do not allow more than eight characters." msgstr "z/VM ID는 8자 초과를 허용하지 않습니다." -#. Terminal id counting starts with 0 -#: src/include/s390/iucvterminal/ui.rb:79 +#. Terminal id counting starts with 0 +#: src/include/s390/iucvterminal/ui.rb:79 msgid "Wrong IUCV ID, only lower case letters are allowed." msgstr "IUCV ID가 잘못되었습니다. 소문자만 사용할 수 있습니다." -#: src/include/s390/iucvterminal/ui.rb:83 +#: src/include/s390/iucvterminal/ui.rb:83 msgid "IUCV IDs cannot be longer than %1 chars." msgstr "IUCV ID는 %1자보다 길 수 없습니다." -#. IUCVTerminal dialog help 1/10 -#: src/include/s390/iucvterminal/ui.rb:121 +#. IUCVTerminal dialog help 1/10 +#: src/include/s390/iucvterminal/ui.rb:121 msgid "<p><h2>Configure Local Terminal System Settings</h2></p>" msgstr "<p><h2>로컬 터미널 시스템 설정 구성</h2></p>" -#. IUCVTerminal dialog help 2/11 -#: src/include/s390/iucvterminal/ui.rb:123 +#. IUCVTerminal dialog help 2/11 +#: src/include/s390/iucvterminal/ui.rb:123 msgid "<p><b>IUCVtty</b></p>" msgstr "<p><b>IUCVtty</b></p>" -#. IUCVTerminal dialog help 3/11 -#: src/include/s390/iucvterminal/ui.rb:125 -msgid "" -"<p>Several <b>IUCVtty instances</b> can run to provide multiple terminal " -"devices. The instances are distinguished by a terminal ID, which is a " -"combination of the <b>Terminal ID Prefix</b> and the number of the instance." -"<br>" -msgstr "" -"<p>여러 개의 <b>IUCVtty 인스턴스</b>가 실행되어 여러 터미널 장치를 제공할 수 " -"있습니다. 인스턴스는 <b>터미널 ID 접두어</b> 및 인스턴스 번호의 조합인 터미" -"널 ID로 구분됩니다.<br>" +#. IUCVTerminal dialog help 3/11 +#: src/include/s390/iucvterminal/ui.rb:125 +msgid "<p>Several <b>IUCVtty instances</b> can run to provide multiple terminal devices. The instances are distinguished by a terminal ID, which is a combination of the <b>Terminal ID Prefix</b> and the number of the instance.<br>" +msgstr "<p>여러 개의 <b>IUCVtty 인스턴스</b>가 실행되어 여러 터미널 장치를 제공할 수 있습니다. 인스턴스는 <b>터미널 ID 접두어</b> 및 인스턴스 번호의 조합인 터미널 ID로 구분됩니다.<br>" -#. IUCVTerminal dialog help 4/11 -#: src/include/s390/iucvterminal/ui.rb:129 -msgid "" -"For example, if you define ten instances with the prefix "<i>lxterm", the terminal IDs from <i>lxterm0</i> to <i>lxterm9</i> are " -"available.</p>" -msgstr "" -"예를 들어, 접두사 "<i>lxterm</i>"으로 인스턴스 열 개를 정의하는 경" -"우 <i>lxterm0</i>에서 <i>lxterm9</i>까지의 터미널 ID를 사용할 수 있습니다." +#. IUCVTerminal dialog help 4/11 +#: src/include/s390/iucvterminal/ui.rb:129 +msgid "For example, if you define ten instances with the prefix "<i>lxterm</i>", the terminal IDs from <i>lxterm0</i> to <i>lxterm9</i> are available.</p>" +msgstr "예를 들어, 접두사 "<i>lxterm</i>"으로 인스턴스 열 개를 정의하는 경우 <i>lxterm0</i>에서 <i>lxterm9</i>까지의 터미널 ID를 사용할 수 있습니다.</p>" -#. IUCVTerminal dialog help 5/11 -#: src/include/s390/iucvterminal/ui.rb:133 +#. IUCVTerminal dialog help 5/11 +#: src/include/s390/iucvterminal/ui.rb:133 msgid "<p><b>HVC</b></p>" msgstr "<p><b>HVC</b></p>" -#. IUCVTerminal dialog help 6/11 -#: src/include/s390/iucvterminal/ui.rb:135 -msgid "" -"<p>The z/VM IUCV HVC device driver is a kernel module and uses device nodes " -"to enable up to eight HVC terminal devices to communicate with getty and " -"login programs.</p>" -msgstr "" -"<p>z/VM IUCV HVC 장치 드라이버는 커널 모듈이며 장치 노드를 사용하여 최대 8개" -"의 HVC 터미널 장치가 getty 및 로그인 프로그램과 통신할 수 있게 합니다.</p>" +#. IUCVTerminal dialog help 6/11 +#: src/include/s390/iucvterminal/ui.rb:135 +msgid "<p>The z/VM IUCV HVC device driver is a kernel module and uses device nodes to enable up to eight HVC terminal devices to communicate with getty and login programs.</p>" +msgstr "<p>z/VM IUCV HVC 장치 드라이버는 커널 모듈이며 장치 노드를 사용하여 최대 8개의 HVC 터미널 장치가 getty 및 로그인 프로그램과 통신할 수 있게 합니다.</p>" -#. IUCVTerminal dialog help 7/11 -#: src/include/s390/iucvterminal/ui.rb:139 -msgid "" -"<p>With <b>restrict access</b>, allow only connections from certain " -"<b>terminal servers</b>.</p>" -msgstr "" -"<p><b>액세스 제한</b>을 사용하여 특정 <b>터미널 서버</b>의 연결만 허용하십시" -"오.</p>" +#. IUCVTerminal dialog help 7/11 +#: src/include/s390/iucvterminal/ui.rb:139 +msgid "<p>With <b>restrict access</b>, allow only connections from certain <b>terminal servers</b>.</p>" +msgstr "<p><b>액세스 제한</b>을 사용하여 특정 <b>터미널 서버</b>의 연결만 허용하십시오.</p>" -#. IUCVTerminal dialog help 8/11 -#: src/include/s390/iucvterminal/ui.rb:143 -msgid "" -"<p>Define the emulation for all instances at once or for each one separately." -"</p>" -msgstr "" -"<p>모든 인스턴스에 대해 동시에 또는 각 인스턴스에 대해 별도로 에뮬레이션을 정" -"의하십시오.</p>" +#. IUCVTerminal dialog help 8/11 +#: src/include/s390/iucvterminal/ui.rb:143 +msgid "<p>Define the emulation for all instances at once or for each one separately.</p>" +msgstr "<p>모든 인스턴스에 대해 동시에 또는 각 인스턴스에 대해 별도로 에뮬레이션을 정의하십시오.</p>" -#. IUCVTerminal dialog help 9/11 -#: src/include/s390/iucvterminal/ui.rb:147 +#. IUCVTerminal dialog help 9/11 +#: src/include/s390/iucvterminal/ui.rb:147 msgid "" -"<p>Activate <b>route kernel messages to hvc0</b> to route kernel messages " -"to\n" +"<p>Activate <b>route kernel messages to hvc0</b> to route kernel messages to\n" "the hvc0 device instead of ttyS0.<br>" msgstr "" "<p><b>커널 메시지를 hvc0으로 라우트</b>를 활성화하여 커널 메시지를\n" "ttyS0 대신 hvc0 장치로 라우트하십시오.<br>" -#. IUCVTerminal dialog help 10/11 -#: src/include/s390/iucvterminal/ui.rb:151 -msgid "" -"Should kernel messages still be shown on ttyS0, manually add " -"<b>console=ttyS0</b> to the current boot selection kernel parameter in the " -"<b>YaST bootloader module</b>.</p>" -msgstr "" -"커널 메시지가 여전히 ttyS0에 표시되는 경우 <b>YaST 부트 로더 모듈</b>의 현재 " -"부트 선택 커널 파라미터에 <b>console=ttyS0</b>을 수동으로 추가하십시오.</p>" +#. IUCVTerminal dialog help 10/11 +#: src/include/s390/iucvterminal/ui.rb:151 +msgid "Should kernel messages still be shown on ttyS0, manually add <b>console=ttyS0</b> to the current boot selection kernel parameter in the <b>YaST bootloader module</b>.</p>" +msgstr "커널 메시지가 여전히 ttyS0에 표시되는 경우 <b>YaST 부트 로더 모듈</b>의 현재 부트 선택 커널 파라미터에 <b>console=ttyS0</b>을 수동으로 추가하십시오.</p>" -#. IUCVTerminal dialog help 11/11 -#: src/include/s390/iucvterminal/ui.rb:155 -msgid "" -"<h3>Warning: HVC Terminals stay logged on without a manual logout through " -"the shortcut: ctrl _ d</h3>" -msgstr "" -"<h3>경고: ctrl _ d 바로 가기로 수동 로그아웃하지 않으면 HVC 터미널은 계속 로" -"그인 상태로 있습니다.</h3>" +#. IUCVTerminal dialog help 11/11 +#: src/include/s390/iucvterminal/ui.rb:155 +msgid "<h3>Warning: HVC Terminals stay logged on without a manual logout through the shortcut: ctrl _ d</h3>" +msgstr "<h3>경고: ctrl _ d 바로 가기로 수동 로그아웃하지 않으면 HVC 터미널은 계속 로그인 상태로 있습니다.</h3>" -#. Dialog content -#: src/include/s390/iucvterminal/ui.rb:168 +#. Dialog content +#: src/include/s390/iucvterminal/ui.rb:168 msgid "&IUCVtty" msgstr "IUCVtty(&I)" -#: src/include/s390/iucvterminal/ui.rb:176 +#: src/include/s390/iucvterminal/ui.rb:176 msgid "Terminal ID &Prefix" msgstr "터미널 ID 접두사(&P)" -#: src/include/s390/iucvterminal/ui.rb:182 +#: src/include/s390/iucvterminal/ui.rb:182 msgid "I&UCVtty instances" msgstr "IUCVtty 인스턴스(&U)" -#: src/include/s390/iucvterminal/ui.rb:196 +#: src/include/s390/iucvterminal/ui.rb:196 msgid "HVC" msgstr "HVC" -#: src/include/s390/iucvterminal/ui.rb:206 +#: src/include/s390/iucvterminal/ui.rb:206 msgid "H&VC instances" msgstr "HVC 인스턴스(&V)" -#: src/include/s390/iucvterminal/ui.rb:217 +#: src/include/s390/iucvterminal/ui.rb:217 msgid "Restrict &access to" msgstr "액세스 제한(&A)" -#: src/include/s390/iucvterminal/ui.rb:223 +#: src/include/s390/iucvterminal/ui.rb:223 msgid "Allowed Terminal &Servers" msgstr "허용된 터미널 서버(&S)" -#: src/include/s390/iucvterminal/ui.rb:231 +#: src/include/s390/iucvterminal/ui.rb:231 msgid "route &kernel messages to hvc0" msgstr "커널 메시지를 hvc0으로 라우트(&K)" -#. if settings were changed don't exit without asking -#: src/include/s390/iucvterminal/ui.rb:324 +#. if settings were changed don't exit without asking +#: src/include/s390/iucvterminal/ui.rb:324 msgid "Really leave without saving?" msgstr "저장하지 않고 나가시겠습니까?" -#. check iucv id -#: src/include/s390/iucvterminal/ui.rb:333 +#. check iucv id +#: src/include/s390/iucvterminal/ui.rb:333 msgid "The IUCV ID is not valid." msgstr "IUCV ID가 올바르지 않습니다." -#. check restrict_hvc_to_srvs and make sure they doesn't end with a comma -#: src/include/s390/iucvterminal/ui.rb:343 +#. check restrict_hvc_to_srvs and make sure they doesn't end with a comma +#: src/include/s390/iucvterminal/ui.rb:343 msgid "The Terminal Servers are not valid." msgstr "터미널 서버가 올바르지 않습니다." -#. check if the bootloader settings need to be adjusted -#: src/include/s390/iucvterminal/ui.rb:366 +#. check if the bootloader settings need to be adjusted +#: src/include/s390/iucvterminal/ui.rb:366 msgid "The system has to be rebooted for some changes to take effect." msgstr "변경사항을 적용하려면 시스템을 재부팅해야 합니다." -#. only five lines are allowed, remove every additional line -#: src/include/s390/onpanic/ui.rb:63 +#. only five lines are allowed, remove every additional line +#: src/include/s390/onpanic/ui.rb:63 msgid "Only %1 lines are allowed for VMCMD." msgstr "VMCMD에는 %1줄만 허용됩니다." -#. For translators: Caption of the dialog -#: src/include/s390/onpanic/ui.rb:109 +#. For translators: Caption of the dialog +#: src/include/s390/onpanic/ui.rb:109 msgid "On Panic Configuration" msgstr "공황 구성" -#. OnPanic dialog help 1/11 -#: src/include/s390/onpanic/ui.rb:112 -msgid "" -"<p><b>Configure the actions to be taken if a kernel panic occurs</b></p>" +#. OnPanic dialog help 1/11 +#: src/include/s390/onpanic/ui.rb:112 +msgid "<p><b>Configure the actions to be taken if a kernel panic occurs</b></p>" msgstr "<p><b>커널 공황이 발생할 경우 수행할 작업을 구성합니다.</b></p>" -#. OnPanic dialog help 2/11 -#: src/include/s390/onpanic/ui.rb:116 -msgid "" -"<p>The <b>Dumpconf</b> daemon needs to be enabled to influence the behavior " -"during kernel panics.</p>" -msgstr "" -"<p>커널 공황 중에 수행되는 동작에 영향을 미치도록 하려면 <b>Dumpconf</b> 데몬" -"을 활성화해야 합니다.</p>" +#. OnPanic dialog help 2/11 +#: src/include/s390/onpanic/ui.rb:116 +msgid "<p>The <b>Dumpconf</b> daemon needs to be enabled to influence the behavior during kernel panics.</p>" +msgstr "<p>커널 공황 중에 수행되는 동작에 영향을 미치도록 하려면 <b>Dumpconf</b> 데몬을 활성화해야 합니다.</p>" -#. OnPanic dialog help 3/11 -#: src/include/s390/onpanic/ui.rb:120 +#. OnPanic dialog help 3/11 +#: src/include/s390/onpanic/ui.rb:120 msgid "<p>The following <b>Panic Actions</b> are possible:<br>" msgstr "<p>다음 <b>공황 작업</b>을 수행할 수 있습니다.<br>" -#. OnPanic dialog help 4/11 -#: src/include/s390/onpanic/ui.rb:122 +#. OnPanic dialog help 4/11 +#: src/include/s390/onpanic/ui.rb:122 msgid "<b>stop</b> Stop Linux (default).<br>" msgstr "<b>stop</b> Linux를 중지합니다(기본값).<br>" -#. OnPanic dialog help 5/11 -#: src/include/s390/onpanic/ui.rb:124 +#. OnPanic dialog help 5/11 +#: src/include/s390/onpanic/ui.rb:124 msgid "<b>dump</b> Dump Linux and stop system.<br>" msgstr "<b>dump</b> Linux를 덤프하고 시스템을 중지합니다.<br>" -#. OnPanic dialog help 6/11 -#: src/include/s390/onpanic/ui.rb:126 +#. OnPanic dialog help 6/11 +#: src/include/s390/onpanic/ui.rb:126 msgid "<b>reipl</b> Reboot Linux.<br>" msgstr "<b>reipl</b> Linux를 재부팅합니다.<br>" -#. OnPanic dialog help 7/11 -#: src/include/s390/onpanic/ui.rb:128 +#. OnPanic dialog help 7/11 +#: src/include/s390/onpanic/ui.rb:128 msgid "" -"<b>dump_reipl</b> Dump Linux and reboot system. This option is only " -"available\n" +"<b>dump_reipl</b> Dump Linux and reboot system. This option is only available\n" "on LPAR with z9(r) machines and later and on z/VMversion 5.3 and later.<br>" msgstr "" "<b>dump_reipl</b> Linux를 덤프하고 시스템을 재부팅합니다. 이 옵션은\n" -"z9(r) 컴퓨터 이상이 있는 LPAR 및 z/VMversion 5.3 이상에서만 사용할 수 있습니" -"다.<br>" +"z9(r) 컴퓨터 이상이 있는 LPAR 및 z/VMversion 5.3 이상에서만 사용할 수 있습니다.<br>" -#. OnPanic dialog help 8/11 -#: src/include/s390/onpanic/ui.rb:132 +#. OnPanic dialog help 8/11 +#: src/include/s390/onpanic/ui.rb:132 msgid "<b>vmcmd</b> Execute specified CP commands and stop system.</p>" msgstr "<b>vmcmd</b> 지정된 CP 명령을 실행하고 시스템을 중지합니다.</p>" -#. OnPanic dialog help 9/11 -#: src/include/s390/onpanic/ui.rb:134 -msgid "" -"<p>The time defined in <b>Delay Minutes</b> defers activating the specified " -"panic action for a newly started system to prevent loops. If the system " -"crashes before the time has elapsed the default action (stop) is performed." -msgstr "" -"<p><b>지연 시간(분)</b>에 정의된 시간은 새로 시작된 시스템의 루프를 방지하기 " -"위해 지정된 공황 작업의 활성화를 지연시킵니다. 이 시간이 지나기 전에 시스템 " -"작동이 중지되면 기본 작업(stop)이 수행됩니다.</p>" +#. OnPanic dialog help 9/11 +#: src/include/s390/onpanic/ui.rb:134 +msgid "<p>The time defined in <b>Delay Minutes</b> defers activating the specified panic action for a newly started system to prevent loops. If the system crashes before the time has elapsed the default action (stop) is performed.</p>" +msgstr "<p><b>지연 시간(분)</b>에 정의된 시간은 새로 시작된 시스템의 루프를 방지하기 위해 지정된 공황 작업의 활성화를 지연시킵니다. 이 시간이 지나기 전에 시스템 작동이 중지되면 기본 작업(stop)이 수행됩니다.</p>" -#. OnPanic dialog help 10/11 -#: src/include/s390/onpanic/ui.rb:138 -msgid "" -"<p>The device for dumping the memory can be set with <b>Dump Device</b>. If " -"no device is shown you have to create one with the <b>YaST Dump Devices</b> " -"dialog.</p>" -msgstr "" -"<p><b>덤프 장치</b>를 사용하여 메모리를 덤프할 장치를 설정할 수 있습니다. 장" -"치가 표시되지 않으면 <b>YaST 덤프 장치</b> 대화 상자를 사용하여 장치를 생성해" -"야 합니다.</p>" +#. OnPanic dialog help 10/11 +#: src/include/s390/onpanic/ui.rb:138 +msgid "<p>The device for dumping the memory can be set with <b>Dump Device</b>. If no device is shown you have to create one with the <b>YaST Dump Devices</b> dialog.</p>" +msgstr "<p><b>덤프 장치</b>를 사용하여 메모리를 덤프할 장치를 설정할 수 있습니다. 장치가 표시되지 않으면 <b>YaST 덤프 장치</b> 대화 상자를 사용하여 장치를 생성해야 합니다.</p>" -#. OnPanic dialog help 11/11 -#: src/include/s390/onpanic/ui.rb:143 -msgid "" -"<p>With <b>VMCMD</b> specify CP commands to be executed before the Linux " -"system is stopped. Only %1 lines and a total of %2 chars are allowed.</p>" -msgstr "" -"<p><b>VMCMD</b>를 사용하여 Linux 시스템이 중지되기 전에 실행할 CP 명령을 지정" -"하십시오. %1줄과 총 %2자만 허용됩니다.</p>" +#. OnPanic dialog help 11/11 +#: src/include/s390/onpanic/ui.rb:143 +msgid "<p>With <b>VMCMD</b> specify CP commands to be executed before the Linux system is stopped. Only %1 lines and a total of %2 chars are allowed.</p>" +msgstr "<p><b>VMCMD</b>를 사용하여 Linux 시스템이 중지되기 전에 실행할 CP 명령을 지정하십시오. %1줄과 총 %2자만 허용됩니다.</p>" -#. radio button label -#: src/include/s390/onpanic/ui.rb:166 +#. radio button label +#: src/include/s390/onpanic/ui.rb:166 msgid "Do No&t Start Dumpconf" msgstr "Dumpconf 시작 안 함(&T)" -#. radio button label -#: src/include/s390/onpanic/ui.rb:175 +#. radio button label +#: src/include/s390/onpanic/ui.rb:175 msgid "&Start Dumpconf" msgstr "Dumpconf 시작(&S)" -#. combobox label -#: src/include/s390/onpanic/ui.rb:189 +#. combobox label +#: src/include/s390/onpanic/ui.rb:189 msgid "&Panic Action" msgstr "공황 작업(&P)" -#: src/include/s390/onpanic/ui.rb:192 +#: src/include/s390/onpanic/ui.rb:192 msgid "Delay &Minutes" msgstr "지연 시간(분)(&M)" -#. combobox label -#: src/include/s390/onpanic/ui.rb:202 +#. combobox label +#: src/include/s390/onpanic/ui.rb:202 msgid "&Dump Device" msgstr "덤프 장치" -#: src/include/s390/onpanic/ui.rb:206 +#: src/include/s390/onpanic/ui.rb:206 msgid "&VMCMD" msgstr "VMCMD(&V)" -#. don't allow dumps if no device is available -#: src/include/s390/onpanic/ui.rb:267 +#. don't allow dumps if no device is available +#: src/include/s390/onpanic/ui.rb:267 msgid "It is not possible to enable the dump process without a dump device." msgstr "덤프 장치 없이 덤프 프로세스를 활성화할 수 없습니다." -#. don't allow vmcmd without at least one command -#: src/include/s390/onpanic/ui.rb:281 +#. don't allow vmcmd without at least one command +#: src/include/s390/onpanic/ui.rb:281 msgid "It is not possible to use vmcmd without defining at least one command." msgstr "하나 이상의 명령을 정의하지 않고 vmcmd를 사용할 수 없습니다." -#. Dialog caption -#: src/include/s390/zfcp/dialogs.rb:113 +#. Dialog caption +#: src/include/s390/zfcp/dialogs.rb:113 msgid "Configured ZFCP Devices" msgstr "구성된 ZFCP 장치" -#. table header -#. table header -#: src/include/s390/zfcp/dialogs.rb:122 src/include/s390/zfcp/dialogs.rb:131 +#. table header +#. table header +#: src/include/s390/zfcp/dialogs.rb:122 src/include/s390/zfcp/dialogs.rb:131 msgid "WWPN" msgstr "WWPN" -#. table header -#. table header -#: src/include/s390/zfcp/dialogs.rb:124 src/include/s390/zfcp/dialogs.rb:133 +#. table header +#. table header +#: src/include/s390/zfcp/dialogs.rb:124 src/include/s390/zfcp/dialogs.rb:133 msgid "LUN" msgstr "LUN" -#. yes-no popup -#. yes-no popup -#: src/include/s390/zfcp/dialogs.rb:238 src/include/s390/zfcp/dialogs.rb:391 +#. yes-no popup +#. yes-no popup +#: src/include/s390/zfcp/dialogs.rb:238 src/include/s390/zfcp/dialogs.rb:391 msgid "" "Really leave the ZFCP device configuration without saving?\n" "All changes will be lost." @@ -1326,51 +1199,48 @@ "ZFCP 장치 구성을 저장하지 않고 종료하시겠습니까?\n" "변경한 내용이 모두 없어집니다." -#. dialog caption -#: src/include/s390/zfcp/dialogs.rb:259 +#. dialog caption +#: src/include/s390/zfcp/dialogs.rb:259 msgid "Add New ZFCP Device" msgstr "새 ZFCP 장치 추가" -#. push button -#: src/include/s390/zfcp/dialogs.rb:309 +#. push button +#: src/include/s390/zfcp/dialogs.rb:309 msgid "Get WWPNs" msgstr "WWPN 가져오기" -#. combo box -#: src/include/s390/zfcp/dialogs.rb:312 +#. combo box +#: src/include/s390/zfcp/dialogs.rb:312 msgid "&WWPN" msgstr "WWPN(&W)" -#. push button -#: src/include/s390/zfcp/dialogs.rb:319 +#. push button +#: src/include/s390/zfcp/dialogs.rb:319 msgid "Get LUNs" msgstr "LUN 가져오기" -#. combobox -#: src/include/s390/zfcp/dialogs.rb:322 +#. combobox +#: src/include/s390/zfcp/dialogs.rb:322 msgid "&LUN" msgstr "LUN(&L)" -#: src/include/s390/zfcp/dialogs.rb:325 -msgid "" -"If no WWPN and no LUN have been defined the system is trying to use " -"allow_lun_scan." -msgstr "" -"WWPN 및 LUN을 정의하지 않은 경우 시스템은 allow_lun_scan을 사용하려고 합니다." +#: src/include/s390/zfcp/dialogs.rb:325 +msgid "If no WWPN and no LUN have been defined the system is trying to use allow_lun_scan." +msgstr "WWPN 및 LUN을 정의하지 않은 경우 시스템은 allow_lun_scan을 사용하려고 합니다." -#. error popup -#. error popup -#: src/include/s390/zfcp/dialogs.rb:376 src/include/s390/zfcp/dialogs.rb:413 +#. error popup +#. error popup +#: src/include/s390/zfcp/dialogs.rb:376 src/include/s390/zfcp/dialogs.rb:413 msgid "The entered WWPN is invalid." msgstr "입력한 WWPN이 잘못되었습니다." -#. error popup -#: src/include/s390/zfcp/dialogs.rb:421 +#. error popup +#: src/include/s390/zfcp/dialogs.rb:421 msgid "The entered LUN is invalid." msgstr "입력한 LUN이 잘못되었습니다." -#. Read dialog help 1/2 -#: src/include/s390/zfcp/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/s390/zfcp/helps.rb:36 msgid "" "<p><b><big>Initializing ZFCP Device Configuration</big></b><br>\n" "</p>\n" @@ -1378,8 +1248,8 @@ "<p><b><big>ZFCP 장치 구성 초기화</big></b><br>\n" "</p>\n" -#. Write dialog help 1/2 -#: src/include/s390/zfcp/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/s390/zfcp/helps.rb:44 msgid "" "<p><b><big>Saving ZFCP Device Configuration</big></b><br>\n" "</p>\n" @@ -1387,8 +1257,8 @@ "<p><b><big>ZFCP 장치 구성 저장</big></b><br>\n" "</p>\n" -#. Disk selection dialog help 1/3 -#: src/include/s390/zfcp/helps.rb:54 +#. Disk selection dialog help 1/3 +#: src/include/s390/zfcp/helps.rb:54 msgid "" "<p><b><big>Configured ZFCP Devices</big></b><br>\n" "Manage ZFCP devices on your system.</p>\n" @@ -1396,13 +1266,13 @@ "<p><b><big>구성된 ZFCP 장치</big></b><br>\n" "시스템의 ZFCP 장치를 관리합니다.</p>\n" -#. Disk selection dialog help 2/3 -#: src/include/s390/zfcp/helps.rb:58 +#. Disk selection dialog help 2/3 +#: src/include/s390/zfcp/helps.rb:58 msgid "<p>To configure a new ZFCP device, click <b>Add</b>.</p>" msgstr "<p>새 ZFCP 장치를 구성하려면 <b>추가</b>를 클릭합니다.</p>" -#. Disk selection dialog help 3/3 -#: src/include/s390/zfcp/helps.rb:60 +#. Disk selection dialog help 3/3 +#: src/include/s390/zfcp/helps.rb:60 msgid "" "<p>To remove a configured ZFCP device, select it and click\n" "<b>Delete</b>.</p>" @@ -1410,13 +1280,13 @@ "<p>구성된 ZFCP 장치를 제거하려면 해당 장치를 선택하고\n" "<b>삭제</b>를 클릭합니다.</p>" -#. Disk selection dialog Warning -#. Disk selection dialog Warning -#: src/include/s390/zfcp/helps.rb:64 src/include/s390/zfcp/helps.rb:88 +#. Disk selection dialog Warning +#. Disk selection dialog Warning +#: src/include/s390/zfcp/helps.rb:64 src/include/s390/zfcp/helps.rb:88 msgid "<h1>Warning</h1>" msgstr "<h1>경고</h1>" -#: src/include/s390/zfcp/helps.rb:65 src/include/s390/zfcp/helps.rb:89 +#: src/include/s390/zfcp/helps.rb:65 src/include/s390/zfcp/helps.rb:89 msgid "" "<p>When accessing a ZFCP device\n" "<b>READ</b>/<b>WRITE</b>, make sure that this access is exclusive.\n" @@ -1426,8 +1296,8 @@ "액세스를 할 때에는 단독으로 액세스해야 합니다.\n" " 그렇게 하지 않으면 데이터가 손상될 위험이 있습니다.</p>" -#. Disk add help 1/2 -#: src/include/s390/zfcp/helps.rb:71 +#. Disk add help 1/2 +#: src/include/s390/zfcp/helps.rb:71 msgid "" "<p><b><big>Add New ZFCP Device</big></b><br>\n" "Enter the identifier of the device to add, the\n" @@ -1439,216 +1309,208 @@ "ZFCP 컨트롤러의 <b>채널 ID</b>,\n" "<b>WWPN</b>(WorldWide Port Number) 및 <b>LUN</b> 번호를 입력합니다.</p>\n" -#. Disk add help 2/2, This is HTML, so finally "<devno>" is displayed as "<devno>" -#: src/include/s390/zfcp/helps.rb:78 +#. Disk add help 2/2, This is HTML, so finally "<devno>" is displayed as "<devno>" +#: src/include/s390/zfcp/helps.rb:78 msgid "" -"<p>The <b>Channel ID</b> must be entered with lowercase letters in a sysfs " -"conforming\n" +"<p>The <b>Channel ID</b> must be entered with lowercase letters in a sysfs conforming\n" "format 0.0.<devno>, such as <tt>0.0.5c51</tt>.</p>\n" -"<p>The WWPN must be entered with lowercase letters as a 16-digit hex value, " -"such as\n" +"<p>The WWPN must be entered with lowercase letters as a 16-digit hex value, such as\n" "<tt>0x5005076300c40e5a</tt>.</p>\n" -"<p>The LUN must be entered with lowercase letters as a 16-digit hex value " -"with\n" -"all trailing zeros, such as <tt>0x52ca000000000000</tt>.</p><p>If no WWPN " -"<b>and</b> no LUN have been defined the system is trying to use " -"allow_lun_scan.</p>" +"<p>The LUN must be entered with lowercase letters as a 16-digit hex value with\n" +"all trailing zeros, such as <tt>0x52ca000000000000</tt>.</p><p>If no WWPN <b>and</b> no LUN have been defined the system is trying to use allow_lun_scan.</p>" msgstr "" "<p>sysfs에서 소문자로 0.0.<devno> 형식을 준수하는 <b>채널 ID</b>를\n" "입력해야 합니다(예: <tt>0.0.5c51</tt>).</p>\n" "<p>WWPN은 소문자 16진수 값(예:\n" "<tt>0x5005076300c40e5a</tt>)으로 입력해야 합니다.</p>\n" "<p>LUN은 뒤가 모두 0으로 채워진 소문자 16진수 값(예:\n" -"<tt>0x52ca000000000000</tt>)으로 입력해야 합니다.</p><p>WWPN <b>및</b> LUN을 " -"정의하지 않은 경우 시스템은 allow_lun_scan을 사용하려고 합니다.</p>" +"<tt>0x52ca000000000000</tt>)으로 입력해야 합니다.</p><p>WWPN <b>및</b> LUN을 정의하지 않은 경우 시스템은 allow_lun_scan을 사용하려고 합니다.</p>" -#. popup label -#. popup label -#: src/modules/DASDController.rb:187 src/modules/ZFCPController.rb:163 +#. popup label +#. popup label +#: src/modules/DASDController.rb:187 src/modules/ZFCPController.rb:163 msgid "Running mkinitrd." msgstr "mkinitrd를 실행 중입니다." -#. Create a textual summary and a list of configured devices -#. @return summary of the current configuration -#: src/modules/DASDController.rb:333 +#. Create a textual summary and a list of configured devices +#. @return summary of the current configuration +#: src/modules/DASDController.rb:333 msgid "Channel ID: %1, Format: %2, DIAG: %3" msgstr "채널 ID: %1, 형식: %2, DIAG: %3" -#: src/modules/DASDController.rb:346 +#: src/modules/DASDController.rb:346 msgid "Channel ID: %1, Device: %2, DIAG: %3" msgstr "채널 ID: %1, 장치: %2, DIAG: %3" -#. popup label -#: src/modules/DASDController.rb:381 +#. popup label +#: src/modules/DASDController.rb:381 msgid "Reading Configured DASD Disks" msgstr "구성된 DASD 디스크 읽기" -#. error report, %1 is device identification -#. error report, %1 is device identification -#. error report, %1 is device identification -#: src/modules/DASDController.rb:472 src/modules/ZFCPController.rb:446 -#: src/modules/ZFCPController.rb:540 +#. error report, %1 is device identification +#. error report, %1 is device identification +#. error report, %1 is device identification +#: src/modules/DASDController.rb:472 src/modules/ZFCPController.rb:446 +#: src/modules/ZFCPController.rb:540 msgid "%1: sysfs not mounted." msgstr "%1: sysfs가 마운트되지 않았습니다." -#. error report, %1 is device identification -#. error report, %1 is device identification -#. error report, %1 is device identification -#: src/modules/DASDController.rb:480 src/modules/ZFCPController.rb:454 -#: src/modules/ZFCPController.rb:548 +#. error report, %1 is device identification +#. error report, %1 is device identification +#. error report, %1 is device identification +#: src/modules/DASDController.rb:480 src/modules/ZFCPController.rb:454 +#: src/modules/ZFCPController.rb:548 msgid "%1: Invalid status for <online>." msgstr "%1: <online> 상태가 잘못되었습니다." -#. error report, %1 is device identification -#. error report, %1 is device identification -#: src/modules/DASDController.rb:488 src/modules/ZFCPController.rb:462 +#. error report, %1 is device identification +#. error report, %1 is device identification +#: src/modules/DASDController.rb:488 src/modules/ZFCPController.rb:462 msgid "%1: No device found for <ccwid>." msgstr "%1: <ccwid>에 대한 장치를 찾을 수 없습니다." -#. error report, %1 is device identification -#: src/modules/DASDController.rb:496 +#. error report, %1 is device identification +#: src/modules/DASDController.rb:496 msgid "%1: Could not change state of the device." msgstr "%1: 장치의 상태를 변경할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/DASDController.rb:505 +#. error report, %1 is device identification +#: src/modules/DASDController.rb:505 msgid "%1: Device is not a DASD." msgstr "%1: 장치가 DASD가 아닙니다." -#. error report, %1 is device identification -#: src/modules/DASDController.rb:514 +#. error report, %1 is device identification +#: src/modules/DASDController.rb:514 msgid "%1: Could not load module." msgstr "%1: 모듈을 로드할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/DASDController.rb:523 +#. error report, %1 is device identification +#: src/modules/DASDController.rb:523 msgid "%1: Failed to activate DASD." msgstr "%1: DASD를 활성화하지 못했습니다." -#. error report, %1 is device identification -#: src/modules/DASDController.rb:532 +#. error report, %1 is device identification +#: src/modules/DASDController.rb:532 msgid "%1: DASD is not formatted." msgstr "%1: DASD가 포맷되지 않았습니다." -#. error report, %1 is device identification, %2 is integer code -#. error report, %1 is device identification, %2 is integer code -#. error report, %1 is device identification, %2 is integer code -#: src/modules/DASDController.rb:540 src/modules/ZFCPController.rb:518 -#: src/modules/ZFCPController.rb:596 +#. error report, %1 is device identification, %2 is integer code +#. error report, %1 is device identification, %2 is integer code +#. error report, %1 is device identification, %2 is integer code +#: src/modules/DASDController.rb:540 src/modules/ZFCPController.rb:518 +#: src/modules/ZFCPController.rb:596 msgid "%1: Unknown error %2." msgstr "%1: %2알 수 없는 오류 " -#. progress bar -#: src/modules/DASDController.rb:653 +#. progress bar +#: src/modules/DASDController.rb:653 msgid "Formatting %1:" msgstr "%1 포맷:" -#. error report, %1 is exit code of the command (integer) -#. error report, %1 is exit code of the command (integer) -#: src/modules/DASDController.rb:682 src/modules/DASDController.rb:779 +#. error report, %1 is exit code of the command (integer) +#. error report, %1 is exit code of the command (integer) +#: src/modules/DASDController.rb:682 src/modules/DASDController.rb:779 msgid "Disks formatting failed. Exit code: %1." msgstr "디스크 포맷에 실패했습니다. 종료 코드: %1." -#. progress bar, %1 is device name, %2 and %3 -#. integers, -#. eg. Formatting /dev/dasda: cylinder 123 of 12334 done -#: src/modules/DASDController.rb:750 +#. progress bar, %1 is device name, %2 and %3 +#. integers, +#. eg. Formatting /dev/dasda: cylinder 123 of 12334 done +#: src/modules/DASDController.rb:750 msgid "Formatting %1: cylinder %2 of %3 done" msgstr "%1 포맷 중: %2/%3 실린더 완료" -#. Get a List of available Disks of type -#. @return [Array<String>] of disks -#: src/modules/Dump.rb:67 +#. Get a List of available Disks of type +#. @return [Array<String>] of disks +#: src/modules/Dump.rb:67 msgid "Checking Disks" msgstr "디스크를 검사하는 중" -#. Progress stage 1/2 -#: src/modules/Dump.rb:76 +#. Progress stage 1/2 +#: src/modules/Dump.rb:76 msgid "Checking DASD disks" msgstr "DASD 디스크를 검사하는 중" -#. Progress stage 2/2 -#: src/modules/Dump.rb:78 +#. Progress stage 2/2 +#: src/modules/Dump.rb:78 msgid "Checking ZFCP disks" msgstr "ZFCP 디스크를 검사하는 중" -#. Progress step 1/2 -#: src/modules/Dump.rb:82 +#. Progress step 1/2 +#: src/modules/Dump.rb:82 msgid "Checking DASD disks..." msgstr "DASD 디스크를 검사하는 중..." -#. Progress step 2/2 -#: src/modules/Dump.rb:84 +#. Progress step 2/2 +#: src/modules/Dump.rb:84 msgid "Checking ZFCP disks..." msgstr "ZFCP 디스크를 검사하는 중..." -#. Progress finished -#. Progress finished -#. Progress finished -#. Progress finished -#. Progress finished -#. Progress finished -#. Progress finished -#. Progress finished -#: src/modules/Dump.rb:86 src/modules/Dump.rb:121 -#: src/modules/IUCVTerminal.rb:165 src/modules/IUCVTerminal.rb:246 -#: src/modules/IUCVTerminalServer.rb:334 -#: src/modules/IUCVTerminalServer.rb:478 - src/modules/OnPanic.rb:234 -#: src/modules/OnPanic.rb:276 +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#: src/modules/Dump.rb:86 src/modules/Dump.rb:121 +#: src/modules/IUCVTerminal.rb:165 src/modules/IUCVTerminal.rb:246 +#: src/modules/IUCVTerminalServer.rb:334 src/modules/IUCVTerminalServer.rb:478 +#: src/modules/OnPanic.rb:234 src/modules/OnPanic.rb:276 msgid "Finished" msgstr "마침" -#. Format a disk as DUMP device -#. @param [String] dev string the disk device node -#. @param [Boolean] force boolean true to append the -f parameter -#. @return [Boolean] true on success -#: src/modules/Dump.rb:106 +#. Format a disk as DUMP device +#. @param [String] dev string the disk device node +#. @param [Boolean] force boolean true to append the -f parameter +#. @return [Boolean] true on success +#: src/modules/Dump.rb:106 msgid "Creating Dump Device" msgstr "덤프 장치를 생성하는 중" -#. Progress stage 1/1 -#: src/modules/Dump.rb:115 +#. Progress stage 1/1 +#: src/modules/Dump.rb:115 msgid "Creating dump device" msgstr "덤프 장치를 생성하는 중" -#. Progress step 1/1 -#: src/modules/Dump.rb:119 +#. Progress step 1/1 +#: src/modules/Dump.rb:119 msgid "Creating dump device. This process might take some minutes." msgstr "덤프 장치를 생성하는 중입니다. 몇 분이 걸릴 수 있습니다." -#. error description -#: src/modules/Dump.rb:148 +#. error description +#: src/modules/Dump.rb:148 msgid "Invalid or unusable disk (fatal)." msgstr "잘못되었거나 사용할 수 없는 디스크입니다(심각한 오류)." -#. error description -#: src/modules/Dump.rb:151 +#. error description +#: src/modules/Dump.rb:151 msgid "Incompatible formatting or partitioning, correct with Force." msgstr "호환되지 않는 포맷 또는 파티션입니다. 강제로 수정하십시오." -#. error description -#: src/modules/Dump.rb:156 +#. error description +#: src/modules/Dump.rb:156 msgid "Missing support programs." msgstr "지원 프로그램이 없습니다." -#. error description -#: src/modules/Dump.rb:159 +#. error description +#: src/modules/Dump.rb:159 msgid "Missing or wrong parameters." msgstr "파라미터가 누락되었거나 잘못되었습니다." -#. error description -#: src/modules/Dump.rb:162 +#. error description +#: src/modules/Dump.rb:162 msgid "Access problem." msgstr "액세스 문제." -#. error description, %1 is error code (integer) -#: src/modules/Dump.rb:165 +#. error description, %1 is error code (integer) +#: src/modules/Dump.rb:165 msgid "Error code from support program: %1." msgstr "지원 프로그램에서 온 오류 코드: %1." -#. error report, %1 is device name, %2 error description -#: src/modules/Dump.rb:169 +#. error report, %1 is device name, %2 error description +#: src/modules/Dump.rb:169 msgid "" "Cannot create dump device %1:\n" "%2" @@ -1656,195 +1518,195 @@ "%1 덤프 장치를 생성할 수 없습니다:\n" "%2" -#. Read all settings -#. @return true on success -#: src/modules/IUCVTerminal.rb:142 +#. Read all settings +#. @return true on success +#: src/modules/IUCVTerminal.rb:142 msgid "Loading IUCV Terminal Configuration" msgstr "IUCV 터미널 구성을 로드하는 중" -#. Progress stage 1/3 -#: src/modules/IUCVTerminal.rb:151 +#. Progress stage 1/3 +#: src/modules/IUCVTerminal.rb:151 msgid "Check IUCVtty entries" msgstr "IUCVtty 항목 검사" -#. Progress stage 2/3 -#: src/modules/IUCVTerminal.rb:153 +#. Progress stage 2/3 +#: src/modules/IUCVTerminal.rb:153 msgid "Check HVC entries" msgstr "HVC 항목 검사" -#. Progress stage 3/3 -#: src/modules/IUCVTerminal.rb:155 +#. Progress stage 3/3 +#: src/modules/IUCVTerminal.rb:155 msgid "Read kernel parameters" msgstr "커널 파라미터 읽기" -#. Progress step 1/3 -#: src/modules/IUCVTerminal.rb:159 +#. Progress step 1/3 +#: src/modules/IUCVTerminal.rb:159 msgid "Checking IUCVtty entries..." msgstr "IUCVtty 엔트리를 검사하는 중..." -#. Progress step 2/3 -#: src/modules/IUCVTerminal.rb:161 +#. Progress step 2/3 +#: src/modules/IUCVTerminal.rb:161 msgid "Checking HVC entries..." msgstr "HVC 엔트리를 검사하는 중..." -#. Progress step 3/3 -#: src/modules/IUCVTerminal.rb:163 +#. Progress step 3/3 +#: src/modules/IUCVTerminal.rb:163 msgid "Reading kernel parameters..." msgstr "커널 파라미터를 읽는 중입니다." -#. Inittab write dialog caption -#: src/modules/IUCVTerminal.rb:223 +#. Inittab write dialog caption +#: src/modules/IUCVTerminal.rb:223 msgid "Saving IUCV Terminal Configuration" msgstr "IUCV 터미널 구성을 저장하는 중" -#. Progress stage 1/4 -#: src/modules/IUCVTerminal.rb:232 +#. Progress stage 1/4 +#: src/modules/IUCVTerminal.rb:232 msgid "Write IUCVtty settings" msgstr "IUCVtty 설정 기록" -#. Progress stage 2/4 -#: src/modules/IUCVTerminal.rb:234 +#. Progress stage 2/4 +#: src/modules/IUCVTerminal.rb:234 msgid "Write HVC settings" msgstr "HVC 설정 쓰기" -#. Progress stage 3/4 -#: src/modules/IUCVTerminal.rb:236 +#. Progress stage 3/4 +#: src/modules/IUCVTerminal.rb:236 msgid "Write kernel parameters" msgstr "커널 파라미터 쓰기" -#. Progress step 1/4 -#: src/modules/IUCVTerminal.rb:240 +#. Progress step 1/4 +#: src/modules/IUCVTerminal.rb:240 msgid "Writing IUCVtty settings..." msgstr "IUCVtty 설정을 쓰는 중..." -#. Progress step 2/4 -#: src/modules/IUCVTerminal.rb:242 +#. Progress step 2/4 +#: src/modules/IUCVTerminal.rb:242 msgid "Writing HVC settings..." msgstr "HVC 설정을 쓰는 중..." -#. Progress step 3/4 -#: src/modules/IUCVTerminal.rb:244 +#. Progress step 3/4 +#: src/modules/IUCVTerminal.rb:244 msgid "Writing kernel parameters..." msgstr "커널 파라미터를 쓰는 중입니다." -#. Text to select all -#: src/modules/IUCVTerminalServer.rb:43 +#. Text to select all +#: src/modules/IUCVTerminalServer.rb:43 msgid "<ALL>" msgstr "<모두>" -#. Read all settings -#. @return true on success -#: src/modules/IUCVTerminalServer.rb:315 +#. Read all settings +#. @return true on success +#: src/modules/IUCVTerminalServer.rb:315 msgid "Loading IUCV Terminal Server Configuration" msgstr "IUCV 터미널 서버 구성을 로드하는 중" -#. Progress stage 1/2 -#: src/modules/IUCVTerminalServer.rb:324 +#. Progress stage 1/2 +#: src/modules/IUCVTerminalServer.rb:324 msgid "Read configuration files" msgstr "구성 파일 읽기" -#. Progress stage 2/2 -#: src/modules/IUCVTerminalServer.rb:326 +#. Progress stage 2/2 +#: src/modules/IUCVTerminalServer.rb:326 msgid "Load user/group settings" msgstr "사용자/그룹 설정 로드" -#. Progress step 1/2 -#: src/modules/IUCVTerminalServer.rb:330 +#. Progress step 1/2 +#: src/modules/IUCVTerminalServer.rb:330 msgid "Reading configuration files..." msgstr "구성 파일을 읽는 중..." -#. Progress step 2/2 -#: src/modules/IUCVTerminalServer.rb:332 +#. Progress step 2/2 +#: src/modules/IUCVTerminalServer.rb:332 msgid "Loading user/group settings..." msgstr "사용자/그룹 설정을 로드하는 중..." -#. no need to write anything if unmodified -#: src/modules/IUCVTerminalServer.rb:459 +#. no need to write anything if unmodified +#: src/modules/IUCVTerminalServer.rb:459 msgid "Saving IUCV Terminal Server Configuration" msgstr "IUCV 터미널 서버 구성을 저장하는 중" -#. Progress stage 1/2 -#: src/modules/IUCVTerminalServer.rb:468 +#. Progress stage 1/2 +#: src/modules/IUCVTerminalServer.rb:468 msgid "Write configuration files" msgstr "구성 파일 쓰기" -#. Progress stage 2/2 -#: src/modules/IUCVTerminalServer.rb:470 +#. Progress stage 2/2 +#: src/modules/IUCVTerminalServer.rb:470 msgid "Update user settings" msgstr "사용자 설정 업데이트" -#. Progress step 1/2 -#: src/modules/IUCVTerminalServer.rb:474 +#. Progress step 1/2 +#: src/modules/IUCVTerminalServer.rb:474 msgid "Writing configuration files..." msgstr "구성 파일을 쓰는 중입니다." -#. Progress step 2/2 -#: src/modules/IUCVTerminalServer.rb:476 +#. Progress step 2/2 +#: src/modules/IUCVTerminalServer.rb:476 msgid "Updating user settings..." msgstr "사용자 설정을 업데이트하는 중..." -#. Dumpconf read dialog caption -#: src/modules/OnPanic.rb:215 +#. Dumpconf read dialog caption +#: src/modules/OnPanic.rb:215 msgid "Reading Dumpconf Configuration" msgstr "Dumpconf 구성을 읽는 중" -#. Progress stage 1/2 -#: src/modules/OnPanic.rb:224 +#. Progress stage 1/2 +#: src/modules/OnPanic.rb:224 msgid "Checking dump devices" msgstr "덤프 장치를 검사하는 중" -#. Progress stage 2/2 -#: src/modules/OnPanic.rb:226 +#. Progress stage 2/2 +#: src/modules/OnPanic.rb:226 msgid "Reading settings" msgstr "설정을 읽는 중" -#. Progress step 1/2 -#: src/modules/OnPanic.rb:230 +#. Progress step 1/2 +#: src/modules/OnPanic.rb:230 msgid "Checking dump devices..." msgstr "덤프 장치를 검사하는 중..." -#. Progress step 2/2 -#: src/modules/OnPanic.rb:232 +#. Progress step 2/2 +#: src/modules/OnPanic.rb:232 msgid "Reading the settings..." msgstr "설정을 읽는 중..." -#. Dumpconf write dialog caption -#: src/modules/OnPanic.rb:257 +#. Dumpconf write dialog caption +#: src/modules/OnPanic.rb:257 msgid "Saving Dumpconf Configuration" msgstr "Dumpconf 구성을 저장하는 중" -#. Progress stage 1/2 -#: src/modules/OnPanic.rb:266 +#. Progress stage 1/2 +#: src/modules/OnPanic.rb:266 msgid "Write the settings" msgstr "설정을 씁니다." -#. Progress stage 2/2 -#: src/modules/OnPanic.rb:268 +#. Progress stage 2/2 +#: src/modules/OnPanic.rb:268 msgid "Restart the service" msgstr "서비스를 재시작합니다." -#. Progress step 1/2 -#: src/modules/OnPanic.rb:272 +#. Progress step 1/2 +#: src/modules/OnPanic.rb:272 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Progress step 2/2 -#: src/modules/OnPanic.rb:274 +#. Progress step 2/2 +#: src/modules/OnPanic.rb:274 msgid "Restarting service..." msgstr "서비스를 재시작하는 중..." -#. Create a textual summary and a list of configured devices -#. @return summary of the current configuration -#: src/modules/ZFCPController.rb:304 +#. Create a textual summary and a list of configured devices +#. @return summary of the current configuration +#: src/modules/ZFCPController.rb:304 msgid "Channel ID: %1, WWPN: %2, LUN: %3" msgstr "채널 ID: %1, WWPN: %2, LUN: %3" -#: src/modules/ZFCPController.rb:313 +#: src/modules/ZFCPController.rb:313 msgid "Channel ID: %1, WWPN: %2, LUN: %3, Device: %4" msgstr "채널 ID: %1, WWPN: %2, LUN: %3, 장치: %4" -#. TRANSLATORS: warning message -#: src/modules/ZFCPController.rb:372 +#. TRANSLATORS: warning message +#: src/modules/ZFCPController.rb:372 msgid "" "Cannot evaluate ZFCP controllers (e.g. in LPAR).\n" "You will have to set it manually." @@ -1852,62 +1714,62 @@ "ZFCP 컨트롤러(예: LPAR)를 평가할 수 없습니다.\n" "수동으로 설정해야 합니다." -#. popup label -#: src/modules/ZFCPController.rb:391 +#. popup label +#: src/modules/ZFCPController.rb:391 msgid "Reading Configured ZFCP Devices" msgstr "구성된 ZFCP 장치를 읽는 중" -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:470 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:470 msgid "%1: WWPN invalid." msgstr "%1: WWPN이 잘못되었습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:478 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:478 msgid "%1: Could not activate WWPN for adapter %1." msgstr "%1: %1 어댑터에 대해 WWPN을 활성화할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:486 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:486 msgid "%1: Could not activate ZFCP device." msgstr "%1: ZFCP 장치를 활성화할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:494 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:494 msgid "%1: SCSI disk could not be deactivated." msgstr "%1: SCSI 디스크를 비활성화할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:502 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:502 msgid "%1: LUN could not be unregistered." msgstr "%1: LUN을 등록 취소할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:510 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:510 msgid "%1: WWPN could not be unregistered." msgstr "%1: WWPN을 등록 취소할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:556 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:556 msgid "%1: Device <ccwid> does not exist." msgstr "%1: <ccwid> 장치는 존재하지 않습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:564 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:564 msgid "%1: Module zfcp could not be loaded." msgstr "%1: zfcp 모듈을 로드할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:572 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:572 msgid "%1: Adapter status could not be changed." msgstr "%1: 어댑터 상태를 변경할 수 없습니다." -#. error report, %1 is device identification -#: src/modules/ZFCPController.rb:580 +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:580 msgid "%1: WWPN ports still active." msgstr "%1: WWPN 포트가 아직 활성 상태입니다." -#. message, %1 is device identification -#: src/modules/ZFCPController.rb:588 +#. message, %1 is device identification +#: src/modules/ZFCPController.rb:588 msgid "%1: This host adapter supports allow_lun_scan." msgstr "%1: 이 호스트 어댑터는 allow_lun_scan을 지원합니다." Modified: branches/SLE12-SP3/yast/ko/po/samba-client.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/samba-client.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/samba-client.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,8 +14,8 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help text for Samba client module -#: src/clients/samba-client.rb:62 +#. translators: command line help text for Samba client module +#: src/clients/samba-client.rb:62 msgid "" "Samba client configuration module.\n" "See Samba documentation for details." @@ -23,43 +23,43 @@ "삼바 클라이언트 설정 모듈.\n" "세부사항에 대해서는 삼바 문서를 보십시오." -#. translators: command line help text for winbind action -#: src/clients/samba-client.rb:75 +#. translators: command line help text for winbind action +#: src/clients/samba-client.rb:75 msgid "Enable or disable the Winbind services (winbindd)" msgstr "winbind 서비스(winbindd)의 활성화 또는 비활성화" -#. translators: command line help text for isdomainmember action -#: src/clients/samba-client.rb:85 +#. translators: command line help text for isdomainmember action +#: src/clients/samba-client.rb:85 msgid "Check if this machine is a member of a domain" msgstr "이 컴퓨터가 도메인의 구성원인지 검사합니다." -#. translators: command line help text for joindomain action -#: src/clients/samba-client.rb:95 +#. translators: command line help text for joindomain action +#: src/clients/samba-client.rb:95 msgid "Join this machine to a domain" msgstr "이 컴퓨터를 도메인에 가입" -#. translators: command line help text for configure action -#: src/clients/samba-client.rb:105 +#. translators: command line help text for configure action +#: src/clients/samba-client.rb:105 msgid "Change the global settings of Samba" msgstr "Samba 서버의 전체적인 설정 변경" -#. translators: command line help text for winbind enable option -#: src/clients/samba-client.rb:113 +#. translators: command line help text for winbind enable option +#: src/clients/samba-client.rb:113 msgid "Enable the service" msgstr "서비스 활성화" -#. translators: command line help text for winbind disable option -#: src/clients/samba-client.rb:119 +#. translators: command line help text for winbind disable option +#: src/clients/samba-client.rb:119 msgid "Disable the service" msgstr "서비스 비활성화" -#. translators: command line help text for domain to be checked/joined -#: src/clients/samba-client.rb:125 +#. translators: command line help text for domain to be checked/joined +#: src/clients/samba-client.rb:125 msgid "The name of a domain to join" msgstr "연결할 도메인의 이름" -#. translators: command line help text for joindomain user option -#: src/clients/samba-client.rb:132 +#. translators: command line help text for joindomain user option +#: src/clients/samba-client.rb:132 msgid "" "The user used for joining the domain. If omitted, YaST will\n" "try to join the domain without specifying user and password.\n" @@ -67,190 +67,186 @@ "도메인에 가입하는 데 사용되는 사용자입니다. 생략된 경우 YaST에서\n" "사용자와 비밀번호를 지정하지 않고 도메인에 가입하려고 합니다.\n" -#. translators: command line help text for joindomain password option -#: src/clients/samba-client.rb:139 +#. translators: command line help text for joindomain password option +#: src/clients/samba-client.rb:139 msgid "The password used for the user when joining the domain" msgstr "도메인에 연결할때 사용자를 위해 사용될 비밀번호" -#. command line help text for machine optioa -#: src/clients/samba-client.rb:146 +#. command line help text for machine optioa +#: src/clients/samba-client.rb:146 msgid "The machine account" msgstr "시스템 계정" -#. translators: command line help text for the workgroup name option -#: src/clients/samba-client.rb:153 +#. translators: command line help text for the workgroup name option +#: src/clients/samba-client.rb:153 msgid "The name of a workgroup" msgstr "작업 그룹의 이름" -#. user must provide the domain name to be tested -#. error message for isdomainmember command line action -#. must provide the domain name to be joined -#. error message for joindomain command line action -#: src/clients/samba-client.rb:211 src/clients/samba-client.rb:255 +#. user must provide the domain name to be tested +#. error message for isdomainmember command line action +#. must provide the domain name to be joined +#. error message for joindomain command line action +#: src/clients/samba-client.rb:211 src/clients/samba-client.rb:255 msgid "Enter the name of a domain." msgstr "도메인의 이름을 입력하십시오." -#. translators: error message for isdomainmember command line action -#: src/clients/samba-client.rb:224 +#. translators: error message for isdomainmember command line action +#: src/clients/samba-client.rb:224 msgid "Cannot test domain membership." msgstr "도메인 회원을 테스트 할 수 없습니다." -#. translators: result message for isdomainmember command line action -#: src/clients/samba-client.rb:231 +#. translators: result message for isdomainmember command line action +#: src/clients/samba-client.rb:231 msgid "This machine is a member of %1." msgstr "이 컴퓨터는 %1의 구성원입니다." -#. translators: result message for isdomainmember command line action -#: src/clients/samba-client.rb:236 +#. translators: result message for isdomainmember command line action +#: src/clients/samba-client.rb:236 msgid "This machine is not a member of %1." msgstr "이 컴퓨터는 %1의 구성원이 아닙니다." -#. translators: result message for joindomain command line action -#. Translators: Information popup, %1 is the name of the domain -#: src/clients/samba-client.rb:278 src/include/samba-client/routines.rb:280 +#. translators: result message for joindomain command line action +#. Translators: Information popup, %1 is the name of the domain +#: src/clients/samba-client.rb:278 src/include/samba-client/routines.rb:280 msgid "Domain %1 joined successfully." msgstr "%1 도메인에 성공적으로 가입했습니다." -#. text entry label -#: src/include/samba-client/dialogs.rb:61 +#. text entry label +#: src/include/samba-client/dialogs.rb:61 msgid "U&ID" msgstr "UID(&I)" -#. text entry label -#: src/include/samba-client/dialogs.rb:63 +#. text entry label +#: src/include/samba-client/dialogs.rb:63 msgid "&Primary Group Name" msgstr "주 그룹 이름(&P)" -#. text entry label -#: src/include/samba-client/dialogs.rb:65 +#. text entry label +#: src/include/samba-client/dialogs.rb:65 msgid "&Secondary Group Name" msgstr "보조 그룹 이름(&S)" -#. text entry label -#: src/include/samba-client/dialogs.rb:67 +#. text entry label +#: src/include/samba-client/dialogs.rb:67 msgid "&GID" msgstr "GID(&G)" -#. text entry label -#: src/include/samba-client/dialogs.rb:72 +#. text entry label +#: src/include/samba-client/dialogs.rb:72 msgid "&Server Name" msgstr "서버 이름(&S)" -#. text entry label -#: src/include/samba-client/dialogs.rb:74 +#. text entry label +#: src/include/samba-client/dialogs.rb:74 msgid "Remote &Path" msgstr "원격 경로(&P)" -#. text entry label -#: src/include/samba-client/dialogs.rb:76 +#. text entry label +#: src/include/samba-client/dialogs.rb:76 msgid "&Mount Point" msgstr "탑재 지점(&M)" -#. text entry label -#: src/include/samba-client/dialogs.rb:78 +#. text entry label +#: src/include/samba-client/dialogs.rb:78 msgid "O&ptions" msgstr "옵션(&P)" -#. text entry label -#: src/include/samba-client/dialogs.rb:80 +#. text entry label +#: src/include/samba-client/dialogs.rb:80 msgid "&User Name" msgstr "사용자 이름(&U)" -#. help text, do not translate 'winbind uid', 'winbind gid' -#: src/include/samba-client/dialogs.rb:174 -msgid "" -"<p>Specify the <b>Range</b> for Samba user and group IDs (<tt>winbind uid and <tt>winbind gid</tt> values).</p>" -msgstr "" -"<p>Samba 사용자 및 그룹 ID(<tt>winbind uid</tt> 및 <tt>winbind gid</tt> 값)" -"에 대한 <b>범위</b>를 지정하십시오.</p>" +#. help text, do not translate 'winbind uid', 'winbind gid' +#: src/include/samba-client/dialogs.rb:174 +msgid "<p>Specify the <b>Range</b> for Samba user and group IDs (<tt>winbind uid</tt> and <tt>winbind gid</tt> values).</p>" +msgstr "<p>Samba 사용자 및 그룹 ID(<tt>winbind uid</tt> 및 <tt>winbind gid</tt> 값)에 대한 <b>범위</b>를 지정하십시오.</p>" -#. frame label -#: src/include/samba-client/dialogs.rb:235 +#. frame label +#: src/include/samba-client/dialogs.rb:235 msgid "&UID Range" msgstr "UID 범위(&U)" -#. int field label -#: src/include/samba-client/dialogs.rb:238 +#. int field label +#: src/include/samba-client/dialogs.rb:238 msgid "&Minimum" msgstr "최소(&M)" -#. int field label -#: src/include/samba-client/dialogs.rb:240 +#. int field label +#: src/include/samba-client/dialogs.rb:240 msgid "Ma&ximum" msgstr "최대(&X)" -#. frame label -#: src/include/samba-client/dialogs.rb:246 +#. frame label +#: src/include/samba-client/dialogs.rb:246 msgid "&GID Range" msgstr "GID 범위(&G)" -#. int field label -#: src/include/samba-client/dialogs.rb:249 +#. int field label +#: src/include/samba-client/dialogs.rb:249 msgid "M&inimum" msgstr "최소(&I)" -#. int field label -#: src/include/samba-client/dialogs.rb:251 +#. int field label +#: src/include/samba-client/dialogs.rb:251 msgid "M&aximum" msgstr "최대(&A)" -#. require_groups -#: src/include/samba-client/dialogs.rb:256 +#. require_groups +#: src/include/samba-client/dialogs.rb:256 msgid "Allowed Group(s)" msgstr "허용되는 그룹" -#: src/include/samba-client/dialogs.rb:261 +#: src/include/samba-client/dialogs.rb:261 msgid "Group Name(s) or SID(s)" msgstr "그룹 이름 또는 SID" -#. combobox label -#: src/include/samba-client/dialogs.rb:271 +#. combobox label +#: src/include/samba-client/dialogs.rb:271 msgid "&Kerberos Method" msgstr "Kerberos 방법(&K)" -#. frame label -#: src/include/samba-client/dialogs.rb:277 +#. frame label +#: src/include/samba-client/dialogs.rb:277 msgid "Windows Internet Name Service" msgstr "Windows 인터넷 이름 서비스" -#. frame label -#: src/include/samba-client/dialogs.rb:286 +#. frame label +#: src/include/samba-client/dialogs.rb:286 msgid "Mount Server Directories" msgstr "마운트 서버 디렉토리" -#. table header -#: src/include/samba-client/dialogs.rb:294 +#. table header +#: src/include/samba-client/dialogs.rb:294 msgid "Server Name" msgstr "서버 이름" -#. table header -#: src/include/samba-client/dialogs.rb:296 +#. table header +#: src/include/samba-client/dialogs.rb:296 msgid "Remote Path" msgstr "원격 경로" -#. table header -#: src/include/samba-client/dialogs.rb:298 +#. table header +#: src/include/samba-client/dialogs.rb:298 msgid "Local Mount Point" msgstr "로컬 탑재 지점" -#. table header -#: src/include/samba-client/dialogs.rb:300 +#. table header +#: src/include/samba-client/dialogs.rb:300 msgid "User Name" msgstr "사용자 이름" -#. table header -#: src/include/samba-client/dialogs.rb:302 +#. table header +#: src/include/samba-client/dialogs.rb:302 msgid "Options" msgstr "옵션" -#. dialog title -#: src/include/samba-client/dialogs.rb:320 +#. dialog title +#: src/include/samba-client/dialogs.rb:320 msgid "Expert Settings" msgstr "고급 설정" -#. error popup: min >= max -#: src/include/samba-client/dialogs.rb:377 +#. error popup: min >= max +#: src/include/samba-client/dialogs.rb:377 msgid "" "The minimum value in the range cannot be\n" "larger than maximum one.\n" @@ -258,116 +254,116 @@ "범위의 최소값은 최대값보다\n" "작아야 합니다.\n" -#. Samba-client workgroup dialog caption -#: src/include/samba-client/dialogs.rb:428 +#. Samba-client workgroup dialog caption +#: src/include/samba-client/dialogs.rb:428 msgid "Windows Domain Membership" msgstr "Windows 도메인 구성원" -#. busy popup text -#: src/include/samba-client/dialogs.rb:449 +#. busy popup text +#: src/include/samba-client/dialogs.rb:449 msgid "Verifying AD domain membership..." msgstr "AD 도메인 구성원 확인 중..." -#. push button label -#: src/include/samba-client/dialogs.rb:461 +#. push button label +#: src/include/samba-client/dialogs.rb:461 msgid "&Leave" msgstr "나가기(&L)" -#. status label -#: src/include/samba-client/dialogs.rb:468 +#. status label +#: src/include/samba-client/dialogs.rb:468 msgid "Currently a member of this domain" msgstr "현재 이 도메인의 구성원임" -#. translators: checkbox label to enable winbind -#: src/include/samba-client/dialogs.rb:489 +#. translators: checkbox label to enable winbind +#: src/include/samba-client/dialogs.rb:489 msgid "&Use SMB Information for Linux Authentication" msgstr "Linux 인증에 SMB 정보 사용(&U)" -#. checkbox label -#: src/include/samba-client/dialogs.rb:500 +#. checkbox label +#: src/include/samba-client/dialogs.rb:500 msgid "&Create Home Directory on Login" msgstr "로그인 시 홈 디렉토리 작성(&H)" -#. frame label -#: src/include/samba-client/dialogs.rb:511 +#. frame label +#: src/include/samba-client/dialogs.rb:511 msgid "Join Settings" msgstr "가입 설정" -#. text entry label -#. text entry label -#: src/include/samba-client/dialogs.rb:517 -#: src/include/samba-client/routines.rb:90 +#. text entry label +#. text entry label +#: src/include/samba-client/dialogs.rb:517 +#: src/include/samba-client/routines.rb:90 msgid "&Username" msgstr "사용자 이름(&U)" -#. text entry label -#: src/include/samba-client/dialogs.rb:526 +#. text entry label +#: src/include/samba-client/dialogs.rb:526 msgid "&Password" msgstr "비밀번호(&P)" -#. text entry label -#: src/include/samba-client/dialogs.rb:533 +#. text entry label +#: src/include/samba-client/dialogs.rb:533 msgid "Mac&hine Account OU" msgstr "시스템 계정 OU(&H)" -#. text entry label -#: src/include/samba-client/dialogs.rb:542 +#. text entry label +#: src/include/samba-client/dialogs.rb:542 msgid "Active Directory Server" msgstr "Active Directory 서버" -#. button label (run YaST client for NTP) -#: src/include/samba-client/dialogs.rb:551 +#. button label (run YaST client for NTP) +#: src/include/samba-client/dialogs.rb:551 msgid "N&TP Configuration..." msgstr "NTP 구성(&T)..." -#. checkbox label -#: src/include/samba-client/dialogs.rb:555 +#. checkbox label +#: src/include/samba-client/dialogs.rb:555 msgid "Disable Name Service Cache" msgstr "이름 서버 캐시 비활성화" -#. checkbox label -#: src/include/samba-client/dialogs.rb:557 +#. checkbox label +#: src/include/samba-client/dialogs.rb:557 msgid "Start File Alteration Monitor" msgstr "파일 변경 감시 시작" -#. translators: frame label -#: src/include/samba-client/dialogs.rb:572 +#. translators: frame label +#: src/include/samba-client/dialogs.rb:572 msgid "Membership" msgstr "구성원" -#: src/include/samba-client/dialogs.rb:580 +#: src/include/samba-client/dialogs.rb:580 msgid "&Domain" msgstr "도메인(&D)" -#. translators: text entry label -#: src/include/samba-client/dialogs.rb:582 +#. translators: text entry label +#: src/include/samba-client/dialogs.rb:582 msgid "&Domain or Workgroup" msgstr "도메인 또는 작업 그룹(&D)" -#. checkbox label -#: src/include/samba-client/dialogs.rb:596 +#. checkbox label +#: src/include/samba-client/dialogs.rb:596 msgid "Off&line Authentication" msgstr "오프라인 인증(&L)" -#. checkbox label -#: src/include/samba-client/dialogs.rb:605 +#. checkbox label +#: src/include/samba-client/dialogs.rb:605 msgid "&Single Sign-on for SSH" msgstr "SSH에 대한 Single Sign-on(&S)" -#. checkbox label -#: src/include/samba-client/dialogs.rb:615 +#. checkbox label +#: src/include/samba-client/dialogs.rb:615 msgid "Change primary DNS suffix" msgstr "기본 DNS 접미사 변경" -#. button label -#: src/include/samba-client/dialogs.rb:622 +#. button label +#: src/include/samba-client/dialogs.rb:622 msgid "&Expert Settings..." msgstr "고급 설정(&E)..." -#. 1st part of an error message: -#. winbind cannot provide user information taken from -#. a workgroup, must be a domain; %1 is the workgroup name -#: src/include/samba-client/dialogs.rb:778 +#. 1st part of an error message: +#. winbind cannot provide user information taken from +#. a workgroup, must be a domain; %1 is the workgroup name +#: src/include/samba-client/dialogs.rb:778 msgid "" "Cannot use the workgroup\n" "'%1' for Linux authentication." @@ -375,13 +371,13 @@ "Linux 인증에 '%1'\n" "작업 그룹을 사용할 수 없습니다." -#. translators: 2nd part of an error message -#: src/include/samba-client/dialogs.rb:787 +#. translators: 2nd part of an error message +#: src/include/samba-client/dialogs.rb:787 msgid "Enter a valid domain." msgstr "유효한 도메인을 입력하십시오." -#. translators: 2nd part of an error message -#: src/include/samba-client/dialogs.rb:789 +#. translators: 2nd part of an error message +#: src/include/samba-client/dialogs.rb:789 msgid "" "Enter a domain or disable\n" "using SMB for Linux authentication." @@ -389,12 +385,11 @@ "도메인을 입력하거나 Linux\n" "인증에 SMB를 사용하지 마십시오." -#. we might use it to warn user (#155716) -#. continue/cancel popup -#: src/include/samba-client/dialogs.rb:809 +#. we might use it to warn user (#155716) +#. continue/cancel popup +#: src/include/samba-client/dialogs.rb:809 msgid "" -"Configuring this system as a client for Active Directory resets the " -"following\n" +"Configuring this system as a client for Active Directory resets the following\n" "settings in smb.conf to the default values:\n" "%1" msgstr "" @@ -402,10 +397,10 @@ "값이 기본값으로 재설정됩니다.\n" " %1" -#. 1st part of an error message: -#. winbind cannot provide user information if the host -#. is not in a domain -#: src/include/samba-client/dialogs.rb:828 +#. 1st part of an error message: +#. winbind cannot provide user information if the host +#. is not in a domain +#: src/include/samba-client/dialogs.rb:828 msgid "" "The host must be a member of a domain\n" "for Linux authentication using SMB." @@ -413,8 +408,8 @@ "호스트는 Linux 인증에 SMB를 사용하는\n" "도메인의 구성원이어야 합니다." -#. translators: 2nd part of an error message -#: src/include/samba-client/dialogs.rb:832 +#. translators: 2nd part of an error message +#: src/include/samba-client/dialogs.rb:832 msgid "" "Join a domain or disable use of SMB\n" "for Linux authentication." @@ -422,13 +417,13 @@ "도메인에 가입하거나 Linux 인증에\n" "SMB를 사용하지 마십시오." -#. used outside this module for autologin function. must be complete sentence. -#: src/include/samba-client/dialogs.rb:841 +#. used outside this module for autologin function. must be complete sentence. +#: src/include/samba-client/dialogs.rb:841 msgid "Samba is now enabled." msgstr "Samba가 활성화되었습니다." -#. yes/no popup text -#: src/include/samba-client/dialogs.rb:853 +#. yes/no popup text +#: src/include/samba-client/dialogs.rb:853 msgid "" "In a Microsoft environment,\n" "hostname changes with DHCP are problematic.\n" @@ -438,8 +433,8 @@ "DHCP의 호스트 이름 변경에 문제가 있습니다.\n" "DHCP의 호스트 이름 변경을 비활성화하시겠습니까?" -#. message popup, part 1/2 -#: src/include/samba-client/dialogs.rb:888 +#. message popup, part 1/2 +#: src/include/samba-client/dialogs.rb:888 msgid "" "This change only affects newly created processes and not already\n" "running services. Restart your services manually or reboot \n" @@ -449,8 +444,8 @@ "서비스에는 영향을 주지 않습니다. 변경 사항을 모든 서비스에 적용하려면\n" " 서비스를 수동으로 재시작하거나 컴퓨터를 재부팅하십시오.\n" -#. Read dialog help 1/2 -#: src/include/samba-client/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/samba-client/helps.rb:36 msgid "" "<p><b><big>Initializing Samba Client Configuration</big></b><br>\n" "</p>\n" @@ -458,8 +453,8 @@ "<p><b><big>Samba 클라이언트 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/samba-client/helps.rb:40 +#. Read dialog help 2/2 +#: src/include/samba-client/helps.rb:40 msgid "" "<p><b><big>Aborting the Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b>.</p>\n" @@ -467,8 +462,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "<b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/samba-client/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/samba-client/helps.rb:44 msgid "" "<p><b><big>Saving Samba Client Configuration</big></b><br>\n" "</p>\n" @@ -476,8 +471,8 @@ "<p><b><big>Samba 클라이언트 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/samba-client/helps.rb:48 +#. Write dialog help 2/2 +#: src/include/samba-client/helps.rb:48 msgid "" "<p><b><big>Aborting Saving</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -489,63 +484,55 @@ " 대화 상자가 추가로 나타나서 지금 중단하는 것이 안전한지 알려줍니다.\n" " </p>\n" -#. translators: Samba workgroup dialog help title -#. translators: Samba membership dialog help title (installation) -#: src/include/samba-client/helps.rb:55 src/include/samba-client/helps.rb:75 +#. translators: Samba workgroup dialog help title +#. translators: Samba membership dialog help title (installation) +#: src/include/samba-client/helps.rb:55 src/include/samba-client/helps.rb:75 msgid "<p><b><big>Selecting Windows Domain Membership</big></b></p>" msgstr "<p><b><big>Windows 도메인 구성원 선택</big></b></p>" -#. translators: Samba workgroup dialog help 1/3 -#: src/include/samba-client/helps.rb:59 +#. translators: Samba workgroup dialog help 1/3 +#: src/include/samba-client/helps.rb:59 msgid "" -"<p>A Linux client can be a member of a workgroup, NT domain, or Active " -"Directory domain.\n" +"<p>A Linux client can be a member of a workgroup, NT domain, or Active Directory domain.\n" "Specify the name of the membership.</p>\n" msgstr "" -"<p>Linux 클라이언트는 작업 그룹, NT 도메인 또는 Active Directory 도메인의 구" -"성원일 수 있습니다.\n" +"<p>Linux 클라이언트는 작업 그룹, NT 도메인 또는 Active Directory 도메인의 구성원일 수 있습니다.\n" "구성원의 이름을 지정하십시오.</p>\n" -#. Samba role dialog help 2/3 -#: src/include/samba-client/helps.rb:63 +#. Samba role dialog help 2/3 +#: src/include/samba-client/helps.rb:63 msgid "" "<p><b>Use SMB Information for Linux Authentication</b> allows \n" -"verification of passwords with the NT server or the Kerberos server if " -"joining an AD domain.</p>\n" +"verification of passwords with the NT server or the Kerberos server if joining an AD domain.</p>\n" msgstr "" "<p><b>Linux 인증에 SMB 정보 사용</b>을 사용하면\n" -"AD 도메인에 가입하는 경우 NT 서버 또는 Kerberos 서버로 비밀번호를 확인할 수 " -"있습니다.</p>\n" +"AD 도메인에 가입하는 경우 NT 서버 또는 Kerberos 서버로 비밀번호를 확인할 수 있습니다.</p>\n" -#. Samba role dialog help 2.5/3 -#: src/include/samba-client/helps.rb:67 +#. Samba role dialog help 2.5/3 +#: src/include/samba-client/helps.rb:67 msgid "" -"<p>Check <b>Change primary DNS suffix</b> to add your AD server into the " -"list of name servers.\n" +"<p>Check <b>Change primary DNS suffix</b> to add your AD server into the list of name servers.\n" "This option is only available for static network setups.</p>" msgstr "" -"<p><b>기본 DNS 접미사 변경</b>을 선택하여 AD 서버를 이름 서버 목록에 추가합니" -"다.\n" +"<p><b>기본 DNS 접미사 변경</b>을 선택하여 AD 서버를 이름 서버 목록에 추가합니다.\n" "이 옵션은 정적 네트워크 설정에만 사용할 수 있습니다.</p>" -#. Samba role dialog help 3/3 -#: src/include/samba-client/helps.rb:71 +#. Samba role dialog help 3/3 +#: src/include/samba-client/helps.rb:71 msgid "" "<p>When you press <b>OK</b>, the system verifies the membership and,\n" -"if it is a NT or Active Directory domain, allows this host to join the " -"domain.</p>\n" +"if it is a NT or Active Directory domain, allows this host to join the domain.</p>\n" msgstr "" "<p><b>확인</b>을 누르면 시스템에서 구성원을 확인하고,\n" -"NT 또는 Active Directory 도메인인 경우 이 호스트가 도메인에 가입할 수 있게 합" -"니다.</p>\n" +"NT 또는 Active Directory 도메인인 경우 이 호스트가 도메인에 가입할 수 있게 합니다.</p>\n" -#. translators: Samba membership dialog help 1/2 (installation) -#: src/include/samba-client/helps.rb:79 +#. translators: Samba membership dialog help 1/2 (installation) +#: src/include/samba-client/helps.rb:79 msgid "<p>Specify the name of the NT or Active Directory domain.</p>\n" msgstr "<p>NT 또는 Active Directory 도메인의 이름을 지정하십시오.</p>\n" -#. translators: Samba membership dialog help 2/2 (installation) -#: src/include/samba-client/helps.rb:81 +#. translators: Samba membership dialog help 2/2 (installation) +#: src/include/samba-client/helps.rb:81 msgid "" "<p>When you press <b>Next</b>, the system verifies the domain and\n" "allows this host to join the domain.</p>\n" @@ -553,71 +540,42 @@ "<p><b>다음</b>을 누르면 시스템은 도메인을 확인하고 이 호스트의 도메인\n" "가입을 허용합니다.</p>\n" -#. Samba membership dialog help (common part 1/4) -#: src/include/samba-client/helps.rb:85 -msgid "" -"<p>Check <b>Create Home Directory on Login</b> to have local home " -"directories created on the first login.</p>" -msgstr "" -"<p>처음 로그인할 때 로컬 홈 디렉토리가 생성되도록 하려면 <b>로그인 시 홈 디렉" -"토리 생성</b>을 선택하십시오.</p>" +#. Samba membership dialog help (common part 1/4) +#: src/include/samba-client/helps.rb:85 +msgid "<p>Check <b>Create Home Directory on Login</b> to have local home directories created on the first login.</p>" +msgstr "<p>처음 로그인할 때 로컬 홈 디렉토리가 생성되도록 하려면 <b>로그인 시 홈 디렉토리 생성</b>을 선택하십시오.</p>" -#. Samba membership dialog help (common part 2/4) -#: src/include/samba-client/helps.rb:89 -msgid "" -"<p><b>Offline Authentication</b> enables the user to log in even if there is " -"no connection to the domain controller. For this option to work, you must " -"log in to your domain at least once. The user's credentials are then stored " -"encrypted on your computer and are reused for a domain login when no " -"connection to the domain controller can be established. This is especially " -"useful for mobile users." -msgstr "" -"<p><b>오프라인 인증</b>을 선택하면 도메인 컨트롤러에 연결되어 있지 않아도 사" -"용자가 로그인할 수 있습니다. 이 옵션을 제대로 사용하려면 적어도 한 번은 도메" -"인에 로그인해야 합니다. 그러면 사용자의 자격 증명이 암호화되어 컴퓨터에 저장" -"되며 도메인 컨트롤러와 연결할 수 없을 때에도 도메인 로그인을 위해 다시 사용됩" -"니다. 이 기능은 모바일 사용자에게 특히 유용합니다." +#. Samba membership dialog help (common part 2/4) +#: src/include/samba-client/helps.rb:89 +msgid "<p><b>Offline Authentication</b> enables the user to log in even if there is no connection to the domain controller. For this option to work, you must log in to your domain at least once. The user's credentials are then stored encrypted on your computer and are reused for a domain login when no connection to the domain controller can be established. This is especially useful for mobile users." +msgstr "<p><b>오프라인 인증</b>을 선택하면 도메인 컨트롤러에 연결되어 있지 않아도 사용자가 로그인할 수 있습니다. 이 옵션을 제대로 사용하려면 적어도 한 번은 도메인에 로그인해야 합니다. 그러면 사용자의 자격 증명이 암호화되어 컴퓨터에 저장되며 도메인 컨트롤러와 연결할 수 없을 때에도 도메인 로그인을 위해 다시 사용됩니다. 이 기능은 모바일 사용자에게 특히 유용합니다." -#. Samba membership dialog help (common part) -#: src/include/samba-client/helps.rb:93 -msgid "" -"<p>Click <b>Expert Settings</b> to enable advanced features such as WINS " -"options or mounting server home directories from Active Directory domains." -msgstr "" -"<p><b>고급 설정</b>을 클릭하여 WINS 옵션, Active Directory 도메인에서 서버 " -"홈 디렉토리 마운트 등의 고급 기능을 활성화하십시오.</p>" +#. Samba membership dialog help (common part) +#: src/include/samba-client/helps.rb:93 +msgid "<p>Click <b>Expert Settings</b> to enable advanced features such as WINS options or mounting server home directories from Active Directory domains.</p>" +msgstr "<p><b>고급 설정</b>을 클릭하여 WINS 옵션, Active Directory 도메인에서 서버 홈 디렉토리 마운트 등의 고급 기능을 활성화하십시오.</p>" -#. Samba membership dialog - additional help for autoyast config -#: src/include/samba-client/helps.rb:97 +#. Samba membership dialog - additional help for autoyast config +#: src/include/samba-client/helps.rb:97 msgid "<p><b>Join Settings</b></p>" msgstr "<p><b>가입 설정</b></p>" -#. Samba membership dialog - additional help for autoyast config -#: src/include/samba-client/helps.rb:101 +#. Samba membership dialog - additional help for autoyast config +#: src/include/samba-client/helps.rb:101 msgid "" -"<p>Set the <b>Username</b> and <b>Password</b> that should be used for " -"joining\n" -"the selected domain during autoinstallation. Note that the password will be " -"saved to the profile in cleartext (unencrypted) form.</p>" +"<p>Set the <b>Username</b> and <b>Password</b> that should be used for joining\n" +"the selected domain during autoinstallation. Note that the password will be saved to the profile in cleartext (unencrypted) form.</p>" msgstr "" -"<p>자동 설치 중 선택한 도메인에 가입하는 데 사용해야 하는 <b>사용자 이름</b> " -"및\n" -"<b>비밀번호</b>를 설정하십시오. 비밀번호가 일반 텍스트(암호화되지 않은) 형식" -"으로 프로파일에 저장됩니다.</p>" +"<p>자동 설치 중 선택한 도메인에 가입하는 데 사용해야 하는 <b>사용자 이름</b> 및\n" +"<b>비밀번호</b>를 설정하십시오. 비밀번호가 일반 텍스트(암호화되지 않은) 형식으로 프로파일에 저장됩니다.</p>" -#. Samba membership dialog - additional help for autoyast config -#: src/include/samba-client/helps.rb:105 -msgid "" -"<p>Specify the <b>Active Directory Server</b> to use for joining an Active " -"Directory domain. This is also used as the value for KDC in the Kerberos " -"configuration.</p>" -msgstr "" -"<p>Active Directory 도메인에 가입하기 위해 사용할 <b>Active Directory 서버를 지정하십시오. 이것은 Kerberos 구성에서 KDC의 값으로도 사용됩니다.</p>" +#. Samba membership dialog - additional help for autoyast config +#: src/include/samba-client/helps.rb:105 +msgid "<p>Specify the <b>Active Directory Server</b> to use for joining an Active Directory domain. This is also used as the value for KDC in the Kerberos configuration.</p>" +msgstr "<p>Active Directory 도메인에 가입하기 위해 사용할 <b>Active Directory 서버</b>를 지정하십시오. 이것은 Kerberos 구성에서 KDC의 값으로도 사용됩니다.</p>" -#. Samba membership dialog - additional help for possible NTP configuration -#: src/include/samba-client/helps.rb:109 +#. Samba membership dialog - additional help for possible NTP configuration +#: src/include/samba-client/helps.rb:109 msgid "" "<p>\n" "To synchronize your time with an NTP server, configure your computer\n" @@ -629,22 +587,22 @@ "구성합니다. <b>NTP 구성</b>을 사용하여 이 구성에 액세스하십시오.\n" "</p>\n" -#. default value of Machine Account -#: src/include/samba-client/routines.rb:62 +#. default value of Machine Account +#: src/include/samba-client/routines.rb:62 msgid "(default)" msgstr "(기본값)" -#. combo box label -#: src/include/samba-client/routines.rb:73 +#. combo box label +#: src/include/samba-client/routines.rb:73 msgid "&Machine Account OU" msgstr "시스템 계정 OU(&M)" -#: src/include/samba-client/routines.rb:78 +#: src/include/samba-client/routines.rb:78 msgid "O&btain list" msgstr "목록 획득(&B)" -#. error popup -#: src/include/samba-client/routines.rb:121 +#. error popup +#: src/include/samba-client/routines.rb:121 msgid "" "User name and password are required\n" "for listing the machine accounts." @@ -652,36 +610,36 @@ "시스템 계정을 나열하려면\n" "사용자 이름과 비밀번호가 필요합니다." -#: src/include/samba-client/routines.rb:139 +#: src/include/samba-client/routines.rb:139 msgid "&Machine Account" msgstr "시스템 계정(&M)" -#. translators: text for busy pop-up -#: src/include/samba-client/routines.rb:177 +#. translators: text for busy pop-up +#: src/include/samba-client/routines.rb:177 msgid "Verifying workgroup membership..." msgstr "작업 그룹의 구성원을 확인하는 중..." -#. popup to fill in the domain leaving info; %1 is the domain name -#: src/include/samba-client/routines.rb:203 +#. popup to fill in the domain leaving info; %1 is the domain name +#: src/include/samba-client/routines.rb:203 msgid "Enter the username and the password for leaving the domain %1." msgstr "%1 도메인을 종료할 경우 사용자 이름과 비밀번호를 입력하십시오." -#. additional information for cluster environment -#: src/include/samba-client/routines.rb:231 +#. additional information for cluster environment +#: src/include/samba-client/routines.rb:231 msgid "The configuration will be propagated across cluster nodes." msgstr "구성은 클러스터 노드를 통해 전파됩니다." -#. popup to fill in the domain joining info; %1 is the domain name -#: src/include/samba-client/routines.rb:242 +#. popup to fill in the domain joining info; %1 is the domain name +#: src/include/samba-client/routines.rb:242 msgid "Enter the username and the password for joining the domain %1." msgstr "%1 도메인에 가입할 경우 사용자 이름과 비밀번호를 입력하십시오." -#: src/include/samba-client/routines.rb:249 +#: src/include/samba-client/routines.rb:249 msgid "To join the domain anonymously, leave the text entries empty.\n" msgstr "도메인에 익명으로 가입하려면 텍스트 엔트리를 비워 두십시오.\n" -#. popup question, the domain status cannot be found out, ask user what to do -#: src/include/samba-client/routines.rb:304 +#. popup question, the domain status cannot be found out, ask user what to do +#: src/include/samba-client/routines.rb:304 msgid "" "Cannot automatically determine if this host\n" "is a member of the domain %1." @@ -689,8 +647,8 @@ "이 호스트가 %1 도메인의 구성원인지\n" "자동으로 확인할 수 없습니다." -#. popup question, first part -#: src/include/samba-client/routines.rb:308 +#. popup question, first part +#: src/include/samba-client/routines.rb:308 msgid "" "This host is not a member\n" "of the domain %1." @@ -698,12 +656,12 @@ "이 호스트는 %1 도메인의\n" "구성원이 아닙니다." -#. last part of popup question -#: src/include/samba-client/routines.rb:312 +#. last part of popup question +#: src/include/samba-client/routines.rb:312 msgid "Join the domain %1?" msgstr "%1 도메인에 가입하시겠습니까?" -#: src/include/samba-client/routines.rb:316 +#: src/include/samba-client/routines.rb:316 msgid "" "Cannot automatically determine if this cluster\n" "is a member of the domain %1." @@ -711,7 +669,7 @@ "이 클러스터가 %1 도메인의 멤버인지\n" "자동으로 확인할 수 없습니다." -#: src/include/samba-client/routines.rb:319 +#: src/include/samba-client/routines.rb:319 msgid "" "This cluster is not a member\n" "of the domain %1." @@ -719,299 +677,251 @@ "이 클러스터는 %1 도메인의\n" "멤버가 아닙니다." -#. popup question -#: src/include/samba-client/routines.rb:361 +#. popup question +#: src/include/samba-client/routines.rb:361 msgid "User shares already exist. Keep or delete these shares?" -msgstr "" -"사용자 공유가 이미 존재합니다. 이를 유지하시겠습니까? 아니면 삭제하시겠습니" -"까?" +msgstr "사용자 공유가 이미 존재합니다. 이를 유지하시겠습니까? 아니면 삭제하시겠습니까?" -#. button label -#: src/include/samba-client/routines.rb:363 +#. button label +#: src/include/samba-client/routines.rb:363 msgid "&Keep" msgstr "유지(&K)" -#. button label -#: src/include/samba-client/routines.rb:365 +#. button label +#: src/include/samba-client/routines.rb:365 msgid "&Delete" msgstr "삭제(&D)" -#. yes/no popup -#: src/include/samba-client/routines.rb:381 +#. yes/no popup +#: src/include/samba-client/routines.rb:381 msgid "Other Windows sharing services are available. Stop them as well?" -msgstr "" -"다른 Windows 공유 서비스도 사용 가능합니다. 이러한 서비스도 중지하시겠습니까?" +msgstr "다른 Windows 공유 서비스도 사용 가능합니다. 이러한 서비스도 중지하시겠습니까?" -#. check box label -#: src/include/samba-client/routines.rb:392 +#. check box label +#: src/include/samba-client/routines.rb:392 msgid "&Use WINS for Hostname Resolution" msgstr "호스트 이름 확인용으로 WINS 사용(&U)" -#. help text for "Use WINS for Hostname Resolution" check box label -#: src/include/samba-client/routines.rb:401 -msgid "" -"<p>If you want to use Microsoft Windows Internet Name Service (WINS) for " -"name resolution, check <b>Use WINS for Hostname Resolution</b>.</p>" -msgstr "" -"<p>이름 확인을 위해 Microsoft Windows 인터넷 이름 서비스(WINS)를 사용하려면 " -"<b>호스트 이름 확인을 위해 WINS 사용</b>을 선택합니다.</p>" +#. help text for "Use WINS for Hostname Resolution" check box label +#: src/include/samba-client/routines.rb:401 +msgid "<p>If you want to use Microsoft Windows Internet Name Service (WINS) for name resolution, check <b>Use WINS for Hostname Resolution</b>.</p>" +msgstr "<p>이름 확인을 위해 Microsoft Windows 인터넷 이름 서비스(WINS)를 사용하려면 <b>호스트 이름 확인을 위해 WINS 사용</b>을 선택합니다.</p>" -#. check box label -#: src/include/samba-client/routines.rb:411 +#. check box label +#: src/include/samba-client/routines.rb:411 msgid "Retrieve WINS server via &DHCP" msgstr "DHCP를 통해 WINS 서버 검색(&E)" -#. help text ("Retrieve WINS server via DHCP" is a checkbox label) -#: src/include/samba-client/routines.rb:418 -msgid "" -"<p>Check <b>Retrieve WINS server via DHCP</b> to use a WINS server provided " -"by DHCP.</p>" -msgstr "" -"<p>DHCP 서버에서 제공한 WINS 서버를 사용하려면 <b>DHCP를 통해 WINS 서버 검색" -"</b>을 선택하십시오.</p>" +#. help text ("Retrieve WINS server via DHCP" is a checkbox label) +#: src/include/samba-client/routines.rb:418 +msgid "<p>Check <b>Retrieve WINS server via DHCP</b> to use a WINS server provided by DHCP.</p>" +msgstr "<p>DHCP 서버에서 제공한 WINS 서버를 사용하려면 <b>DHCP를 통해 WINS 서버 검색</b>을 선택하십시오.</p>" -#. frame label -#: src/include/samba-client/routines.rb:438 +#. frame label +#: src/include/samba-client/routines.rb:438 msgid "Sharing by Users" msgstr "사용자에 의한 공유" -#. frame label -#: src/include/samba-client/routines.rb:440 +#. frame label +#: src/include/samba-client/routines.rb:440 msgid "Sharing" msgstr "공유" -#. checkbox label -#: src/include/samba-client/routines.rb:453 +#. checkbox label +#: src/include/samba-client/routines.rb:453 msgid "&Allow Users to Share Their Directories" msgstr "사용자의 디렉토리 공유 허용(&W)" -#. checkbox label -#: src/include/samba-client/routines.rb:463 +#. checkbox label +#: src/include/samba-client/routines.rb:463 msgid "Allow &Guest Access" msgstr "게스트 액세스 허용(&G)" -#. texty entry label -#: src/include/samba-client/routines.rb:475 +#. texty entry label +#: src/include/samba-client/routines.rb:475 msgid "&Permitted Group" msgstr "허용된 그룹(&P)" -#. infield label -#: src/include/samba-client/routines.rb:481 +#. infield label +#: src/include/samba-client/routines.rb:481 msgid "&Maximum Number of Shares" msgstr "최대 공유 개수(&M)" -#. membership dialog help (common part 3/4), %1 is separator (e.g. '\') -#: src/include/samba-client/routines.rb:511 -msgid "" -"<p><b>Allow Users to Share Their Directories</b> enables members of the " -"group in <b>Permitted Group</b> to share directories they own with other " -"users. For example, <tt>users</tt> for a local scope or <tt>DOMAIN%1Users for a domain scope. The user also must make sure that the file system " -"permissions allow access.</p>" -msgstr "" -"<p><b>사용자가 디렉토리를 공유하도록 허용</b>을 사용하면 <b>허용된 그룹</b>" -"의 그룹 구성원은 각자의 디렉토리를 다른 사용자와 공유할 수 있습니다. 예를 들" -"면 로컬 범위의 <tt>users</tt> 및 도메인 범위의 <tt>DOMAIN%1Users</tt>가 있습" -"니다. 사용자는 또한 파일 시스템 권한이 액세스를 허용하는지 확인해야 합니다." +#. membership dialog help (common part 3/4), %1 is separator (e.g. '\') +#: src/include/samba-client/routines.rb:511 +msgid "<p><b>Allow Users to Share Their Directories</b> enables members of the group in <b>Permitted Group</b> to share directories they own with other users. For example, <tt>users</tt> for a local scope or <tt>DOMAIN%1Users</tt> for a domain scope. The user also must make sure that the file system permissions allow access.</p>" +msgstr "<p><b>사용자가 디렉토리를 공유하도록 허용</b>을 사용하면 <b>허용된 그룹</b>의 그룹 구성원은 각자의 디렉토리를 다른 사용자와 공유할 수 있습니다. 예를 들면 로컬 범위의 <tt>users</tt> 및 도메인 범위의 <tt>DOMAIN%1Users</tt>가 있습니다. 사용자는 또한 파일 시스템 권한이 액세스를 허용하는지 확인해야 합니다.</p>" -#. membership dialog help (common part 3/4) -#: src/include/samba-client/routines.rb:517 -msgid "" -"<p>With <b>Maximum Number of Shares</b>, limit the total amount of shares " -"that may be created.</p>" -msgstr "" -"<p><b>최대 공유 수</b>에서는 생성될 수 있는 공유의 총 수량을 제한할 수 있습니" -"다.</p>" +#. membership dialog help (common part 3/4) +#: src/include/samba-client/routines.rb:517 +msgid "<p>With <b>Maximum Number of Shares</b>, limit the total amount of shares that may be created.</p>" +msgstr "<p><b>최대 공유 수</b>에서는 생성될 수 있는 공유의 총 수량을 제한할 수 있습니다.</p>" -#. membership dialog help common part -#: src/include/samba-client/routines.rb:522 -msgid "" -"<p>To permit access to user shares without authentication, enable <b>Allow " -"Guest Access</b>.</p>" -msgstr "" -"<p>사용자 공유에 인증 없이 액세스를 허용하려면 <b>게스트 액세스 허용</b>을 활" -"성화합니다</b>.</p>" +#. membership dialog help common part +#: src/include/samba-client/routines.rb:522 +msgid "<p>To permit access to user shares without authentication, enable <b>Allow Guest Access</b>.</p>" +msgstr "<p>사용자 공유에 인증 없이 액세스를 허용하려면 <b>게스트 액세스 허용</b>을 활성화합니다</b>.</p>" -#. help text for PAM Mount table -#: src/include/samba-client/routines.rb:531 +#. help text for PAM Mount table +#: src/include/samba-client/routines.rb:531 msgid "" "<p>In the table <b>Mount Server Directories</b>, you can specify server\n" -"directories (such as home directory) which should be locally mounted when " -"the\n" +"directories (such as home directory) which should be locally mounted when the\n" "user is logged in. If mounting should be user-specific, specify <b>User\n" -"Name</b> for the selected rule. Otherwise, the directory is mounted for each " -"user. For more information, see pam_mount.conf manual page.</p>" +"Name</b> for the selected rule. Otherwise, the directory is mounted for each user. For more information, see pam_mount.conf manual page.</p>" msgstr "" "<p>테이블 <b>서버 디렉토리 마운트</b>에서 사용자가 로그인된 경우\n" "로컬에 마운트되어야 하는 서버 디렉토리(예: 홈 디렉토리)를\n" "지정할 수 있습니다. 마운트가 사용자 특정이어야 하는 경우\n" -"선택한 규칙에 대한 <b>사용자 이름</b>을 지정하십시오. 그렇지 않으면 각 사용자" -"에 대해 디렉토리가 마운트됩니다. 자세한 내용은 pam_mount.conf 매뉴얼 페이지" -"를 참조하십시오.</p>" +"선택한 규칙에 대한 <b>사용자 이름</b>을 지정하십시오. 그렇지 않으면 각 사용자에 대해 디렉토리가 마운트됩니다. 자세한 내용은 pam_mount.conf 매뉴얼 페이지를 참조하십시오.</p>" -#. help text for PAM Mount table: example -#: src/include/samba-client/routines.rb:538 -msgid "" -"<p>For example, you may use <tt>/home/%(DOMAIN_USER)</tt> value for " -"<b>Remote Path</b>, <tt>~/</tt> value for <b>Local Mount Point</b> to mount " -"the home directory, together with a value <tt>user=%(DOMAIN_USER)</tt> as a " -"part of <b>Options</b>.</p>" -msgstr "" -"<p>예를 들어, <b>원격 경로</b>에 <tt>/home/%(DOMAIN_USER)</tt> 값을, <b>로컬 " -"마운트 포인트</b>에 <tt>~/</tt> 값을 <tt>user=%(DOMAIN_USER)</tt> 값과 함께 " -"<b>옵션</b>의 일부로 사용하여 홈 디렉토리를 마운트할 수 있습니다.</p>" +#. help text for PAM Mount table: example +#: src/include/samba-client/routines.rb:538 +msgid "<p>For example, you may use <tt>/home/%(DOMAIN_USER)</tt> value for <b>Remote Path</b>, <tt>~/</tt> value for <b>Local Mount Point</b> to mount the home directory, together with a value <tt>user=%(DOMAIN_USER)</tt> as a part of <b>Options</b>.</p>" +msgstr "<p>예를 들어, <b>원격 경로</b>에 <tt>/home/%(DOMAIN_USER)</tt> 값을, <b>로컬 마운트 포인트</b>에 <tt>~/</tt> 값을 <tt>user=%(DOMAIN_USER)</tt> 값과 함께 <b>옵션</b>의 일부로 사용하여 홈 디렉토리를 마운트할 수 있습니다.</p>" -#. help text for kerberos method option -#: src/include/samba-client/routines.rb:546 -msgid "" -"<p>The value of <b>Kerberos Method</b> defines how kerberos tickets are " -"verified. When <b>Single Sing-on for SSH</b> is used, the default Kerberos " -"Method set by YaST is <tt>secrets and keytab</tt>. See smb.conf manual page " -"for details.</p>" -msgstr "" -"<p><b>Kerberos 방법</b> 값은 kerberos 티켓이 확인되는 방법을 정의합니다. " -"<b>SSH에 대한 Single Sign-on</b>이 사용되는 경우 YaST에서 설정되는 기본 " -"Kerberos 방법은 <tt>암호 및 keytab</tt>입니다. 자세한 내용은 smb.conf 매뉴얼 " -"페이지를 참조하십시오.</p>" +#. help text for kerberos method option +#: src/include/samba-client/routines.rb:546 +msgid "<p>The value of <b>Kerberos Method</b> defines how kerberos tickets are verified. When <b>Single Sing-on for SSH</b> is used, the default Kerberos Method set by YaST is <tt>secrets and keytab</tt>. See smb.conf manual page for details.</p>" +msgstr "<p><b>Kerberos 방법</b> 값은 kerberos 티켓이 확인되는 방법을 정의합니다. <b>SSH에 대한 Single Sign-on</b>이 사용되는 경우 YaST에서 설정되는 기본 Kerberos 방법은 <tt>암호 및 keytab</tt>입니다. 자세한 내용은 smb.conf 매뉴얼 페이지를 참조하십시오.</p>" -#. translators: initialization dialog caption -#: src/include/samba-client/wizards.rb:74 +#. translators: initialization dialog caption +#: src/include/samba-client/wizards.rb:74 msgid "Samba Client Configuration" msgstr "삼바 클라이언트 설정" -#. translators: initialization dialog contents -#: src/include/samba-client/wizards.rb:76 +#. translators: initialization dialog contents +#: src/include/samba-client/wizards.rb:76 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. dialog caption -#: src/modules/Kerberos.rb:650 +#. dialog caption +#: src/modules/Kerberos.rb:650 msgid "Saving Kerberos Client Configuration" msgstr "Kerberos 클라이언트 설정 저장중" -#. progress stage label -#: src/modules/Kerberos.rb:655 +#. progress stage label +#: src/modules/Kerberos.rb:655 msgid "Write PAM settings" msgstr "PAM 설정 기록" -#. progress stage label -#: src/modules/Kerberos.rb:657 +#. progress stage label +#: src/modules/Kerberos.rb:657 msgid "Write Kerberos client settings" msgstr "Kerberos 클라이언트 설정들 기록" -#. progress stage label -#: src/modules/Kerberos.rb:659 +#. progress stage label +#: src/modules/Kerberos.rb:659 msgid "Write OpenSSH settings" msgstr "OpenSSH 설정 기록" -#. progress step label -#: src/modules/Kerberos.rb:663 +#. progress step label +#: src/modules/Kerberos.rb:663 msgid "Writing PAM settings..." msgstr "PAM 설정을 기록하고 있습니다..." -#. progress step label -#: src/modules/Kerberos.rb:665 +#. progress step label +#: src/modules/Kerberos.rb:665 msgid "Writing Kerberos client settings..." msgstr "Kerberos 클라이언트 설정들을 기록중..." -#. progress step label -#: src/modules/Kerberos.rb:667 +#. progress step label +#: src/modules/Kerberos.rb:667 msgid "Writing OpenSSH settings..." msgstr "OpenSSH 설정 기록 중..." -#. final progress step label -#. translators: progress finished -#. translators: write progress finished -#: src/modules/Kerberos.rb:669 src/modules/Samba.rb:643 -#: src/modules/Samba.rb:765 +#. final progress step label +#. translators: progress finished +#. translators: write progress finished +#: src/modules/Kerberos.rb:669 src/modules/Samba.rb:643 +#: src/modules/Samba.rb:765 msgid "Finished" msgstr "완료됨" -#. progress stage label -#: src/modules/Kerberos.rb:673 +#. progress stage label +#: src/modules/Kerberos.rb:673 msgid "Install required packages" msgstr "요구된 패키지들 설치" -#. progress step label -#: src/modules/Kerberos.rb:675 +#. progress step label +#: src/modules/Kerberos.rb:675 msgid "Installing required packages..." msgstr "요구된 패키지 설치중..." -#. summary header -#: src/modules/Kerberos.rb:953 +#. summary header +#: src/modules/Kerberos.rb:953 msgid "PAM Login" msgstr "PAM 로그인" -#. summary item -#: src/modules/Kerberos.rb:959 +#. summary item +#: src/modules/Kerberos.rb:959 msgid "Use Kerberos" msgstr "kerberos 사용" -#. summary item -#: src/modules/Kerberos.rb:961 +#. summary item +#: src/modules/Kerberos.rb:961 msgid "Do Not Use Kerberos" msgstr "kerberos 사용하지 않음" -#. summary header -#: src/modules/Kerberos.rb:965 +#. summary header +#: src/modules/Kerberos.rb:965 msgid "Default Realm" msgstr "기본 영역" -#. summary header -#: src/modules/Kerberos.rb:972 +#. summary header +#: src/modules/Kerberos.rb:972 msgid "Default Domain" msgstr "기본 도메인" -#. summary header -#: src/modules/Kerberos.rb:979 +#. summary header +#: src/modules/Kerberos.rb:979 msgid "KDC Server Address" msgstr "KDC 서버 주소" -#. summary header -#: src/modules/Kerberos.rb:983 +#. summary header +#: src/modules/Kerberos.rb:983 msgid "Clock Skew" msgstr "시간차" -#. summary text, %1 is value -#: src/modules/Kerberos.rb:999 +#. summary text, %1 is value +#: src/modules/Kerberos.rb:999 msgid "<b>KDC Server</b>: %1<br>" msgstr "<b>KDC 서버</b>: %1<br>" -#. summary text, %1 is value -#: src/modules/Kerberos.rb:1004 +#. summary text, %1 is value +#: src/modules/Kerberos.rb:1004 msgid "<b>Default Domain</b>: %1<br>" msgstr "<b>기본 도메인</b>: %1<br>" -#. summary text, %1 is value -#: src/modules/Kerberos.rb:1010 +#. summary text, %1 is value +#: src/modules/Kerberos.rb:1010 msgid "<b>Default Realm</b>: %1<br>" msgstr "<b>기본 영역</b>: %1<br>" -#. summary text (yes/no follows) -#: src/modules/Kerberos.rb:1016 +#. summary text (yes/no follows) +#: src/modules/Kerberos.rb:1016 msgid "<b>Kerberos Authentication Enabled</b>: %1" msgstr "<b>kerberos 인증이 활성화됨</b>: %1" -#. summary value -#. translators: winbind status in summary -#: src/modules/Kerberos.rb:1019 src/modules/Samba.rb:1112 +#. summary value +#. translators: winbind status in summary +#: src/modules/Kerberos.rb:1019 src/modules/Samba.rb:1112 msgid "Yes" msgstr "예" -#. summary value -#. translators: winbind status in summary -#: src/modules/Kerberos.rb:1021 src/modules/Samba.rb:1114 +#. summary value +#. translators: winbind status in summary +#: src/modules/Kerberos.rb:1021 src/modules/Samba.rb:1114 msgid "No" msgstr "아니오" -#. summary line -#: src/modules/Kerberos.rb:1028 +#. summary line +#: src/modules/Kerberos.rb:1028 msgid "Configuration Acquired via DNS" msgstr "DNS를 통해 구성을 가져옴" -#. error popup (wrong format of entered value) -#: src/modules/Kerberos.rb:1056 +#. error popup (wrong format of entered value) +#: src/modules/Kerberos.rb:1056 msgid "" "Clock skew is invalid.\n" "Try again.\n" @@ -1019,8 +929,8 @@ "시간차가 잘못되었습니다.\n" "다시 시도하십시오.\n" -#. error popup (wrong format of entered value) -#: src/modules/Kerberos.rb:1059 +#. error popup (wrong format of entered value) +#: src/modules/Kerberos.rb:1059 msgid "" "Lifetime is invalid.\n" "Try again." @@ -1028,143 +938,143 @@ "수명이 잘못되었습니다.\n" "다시 시도하십시오." -#. Samba-client read dialog caption -#: src/modules/Samba.rb:622 +#. Samba-client read dialog caption +#: src/modules/Samba.rb:622 msgid "Initializing Samba Client Configuration" msgstr "삼바 클라이언트 설정 초기화 중" -#. translators: progress stage 1/2 -#: src/modules/Samba.rb:633 +#. translators: progress stage 1/2 +#: src/modules/Samba.rb:633 msgid "Read the global Samba settings" msgstr "전역 삼바 설정 읽기" -#. translators: progress stage 2/2 -#: src/modules/Samba.rb:635 +#. translators: progress stage 2/2 +#: src/modules/Samba.rb:635 msgid "Read the winbind status" msgstr "winbind 상태 읽기" -#. translators: progress step 1/2 -#: src/modules/Samba.rb:639 +#. translators: progress step 1/2 +#: src/modules/Samba.rb:639 msgid "Reading the global Samba settings..." msgstr "전역 삼바 설정 읽는 중..." -#. translators: progress step 2/2 -#: src/modules/Samba.rb:641 +#. translators: progress step 2/2 +#: src/modules/Samba.rb:641 msgid "Reading the winbind status..." msgstr "winbind 상태 읽는 중..." -#. Samba-client read dialog caption -#: src/modules/Samba.rb:745 +#. Samba-client read dialog caption +#: src/modules/Samba.rb:745 msgid "Saving Samba Client Configuration" msgstr "삼바 클라이언트 설정 저장 중" -#. translators: write progress stage -#: src/modules/Samba.rb:749 +#. translators: write progress stage +#: src/modules/Samba.rb:749 msgid "Write the settings" msgstr "설정 쓰기" -#. translators: write progress stage -#: src/modules/Samba.rb:752 +#. translators: write progress stage +#: src/modules/Samba.rb:752 msgid "Disable Samba services" msgstr "삼바 서비스 비활성화" -#. translators: write progress stage -#: src/modules/Samba.rb:754 +#. translators: write progress stage +#: src/modules/Samba.rb:754 msgid "Enable Samba services" msgstr "삼바 서비스 활성화" -#. translators: write progress step -#: src/modules/Samba.rb:758 +#. translators: write progress step +#: src/modules/Samba.rb:758 msgid "Writing the settings..." msgstr "세팅을 쓰는 중..." -#. translators: write progress step -#: src/modules/Samba.rb:761 +#. translators: write progress step +#: src/modules/Samba.rb:761 msgid "Disabling Samba services..." msgstr "삼바 서비스를 비활성화하는 중..." -#. translators: write progress step -#: src/modules/Samba.rb:763 +#. translators: write progress step +#: src/modules/Samba.rb:763 msgid "Enabling Samba services..." msgstr "삼바 서비스를 활성화하는 중..." -#. write progress stage -#: src/modules/Samba.rb:773 +#. write progress stage +#: src/modules/Samba.rb:773 msgid "Write Kerberos configuration" msgstr "Kerberos 구성 쓰기" -#. write progress step -#: src/modules/Samba.rb:775 +#. write progress step +#: src/modules/Samba.rb:775 msgid "Writing Kerberos configuration..." msgstr "Kerberos 구성 쓰는 중..." -#. translators: error message, %1 is filename -#. translators: error message, %1 is filename -#. translators: error message, %1 is filename -#: src/modules/Samba.rb:833 src/modules/Samba.rb:870 src/modules/Samba.rb:887 +#. translators: error message, %1 is filename +#. translators: error message, %1 is filename +#. translators: error message, %1 is filename +#: src/modules/Samba.rb:833 src/modules/Samba.rb:870 src/modules/Samba.rb:887 msgid "Cannot write settings to %1." msgstr "%1 설정을 기록할 수 없습니다." -#. translators: error message, do not change winbind -#: src/modules/Samba.rb:846 +#. translators: error message, do not change winbind +#: src/modules/Samba.rb:846 msgid "Cannot start winbind service." msgstr "winbind 서비스를 시작할 수 없습니다." -#. translators: error message, do not change winbind -#: src/modules/Samba.rb:851 +#. translators: error message, do not change winbind +#: src/modules/Samba.rb:851 msgid "Cannot start winbind daemon." msgstr "winbind 데몬을 시작할 수 없습니다." -#. translators: error message, do not change winbind -#: src/modules/Samba.rb:857 +#. translators: error message, do not change winbind +#: src/modules/Samba.rb:857 msgid "Cannot stop winbind service." msgstr "winbind 서비스를 중지할 수 없습니다." -#. translators: error message, do not change winbind -#: src/modules/Samba.rb:862 +#. translators: error message, do not change winbind +#: src/modules/Samba.rb:862 msgid "Cannot stop winbind daemon." msgstr "winbind 데몬을 중지할 수 없습니다." -#. translators: error message -#: src/modules/Samba.rb:878 +#. translators: error message +#: src/modules/Samba.rb:878 msgid "Cannot write PAM settings." msgstr "PAM 설정을 기록할 수 없습니다." -#. summary header -#: src/modules/Samba.rb:1052 +#. summary header +#: src/modules/Samba.rb:1052 msgid "Global Configuration" msgstr "전체 구성" -#. autoyast summary item: configured workgroup -#: src/modules/Samba.rb:1059 +#. autoyast summary item: configured workgroup +#: src/modules/Samba.rb:1059 msgid "Workgroup or Domain: %1" msgstr "작업 그룹 또는 도메인: %1" -#. autoyast summary item -#: src/modules/Samba.rb:1068 +#. autoyast summary item +#: src/modules/Samba.rb:1068 msgid "Create Home Directory on Login" msgstr "로그인 시 홈 디렉토리 작성" -#. autoyast summary item -#: src/modules/Samba.rb:1075 +#. autoyast summary item +#: src/modules/Samba.rb:1075 msgid "Offline Authentication Enabled" msgstr "오프라인 인증 활성화됨" -#. autoyast summary item -#: src/modules/Samba.rb:1083 +#. autoyast summary item +#: src/modules/Samba.rb:1083 msgid "Maximum Number of Shares: %1" msgstr "최대 공유 개수: %1" -#. summary item: configured workgroup -#: src/modules/Samba.rb:1104 +#. summary item: configured workgroup +#: src/modules/Samba.rb:1104 msgid "<p><b>Workgroup or Domain</b>: %1</p>" msgstr "<p><b>작업 그룹 또는 도메인</b>: %1</p>" -#. summary item: authentication using winbind -#: src/modules/Samba.rb:1109 +#. summary item: authentication using winbind +#: src/modules/Samba.rb:1109 msgid "<p><b>Authentication with SMB</b>: %1</p>" msgstr "<p><b>SMB로 인증</b>: %1</p>" -#: src/modules/SambaNetJoin.pm:322 +#: src/modules/SambaNetJoin.pm:322 msgid "Unable to proceed with join: Inconsistent cluster state" msgstr "가입을 계속할 수 없음: 일치하지 않는 클러스터 상태" Modified: branches/SLE12-SP3/yast/ko/po/samba-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/samba-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/samba-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,204 +14,201 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help text for samba-server module -#: src/clients/samba-server.rb:66 +#. translators: command line help text for samba-server module +#: src/clients/samba-server.rb:66 msgid "Samba server configuration module (see Samba documentation for details)" msgstr "Samba 서버 구성 모듈(자세한 내용은 Samba 설명서를 참조하십시오.)" -#. translators: command line help text for share action -#: src/clients/samba-server.rb:79 +#. translators: command line help text for share action +#: src/clients/samba-server.rb:79 msgid "Manipulate a single share" msgstr "단일 공유 조정" -#. translators: command line help text for list action -#: src/clients/samba-server.rb:89 +#. translators: command line help text for list action +#: src/clients/samba-server.rb:89 msgid "Show the list of available shares" msgstr "사용 가능한 공유 목록 보기" -#. translators: command line help text for role action -#: src/clients/samba-server.rb:99 +#. translators: command line help text for role action +#: src/clients/samba-server.rb:99 msgid "Set the role of the server" msgstr "서버 역할 설정" -#. translators: command line help text for backend selection action -#: src/clients/samba-server.rb:109 +#. translators: command line help text for backend selection action +#: src/clients/samba-server.rb:109 msgid "Set the back-end for storing user information" msgstr "사용자 정보 저장을 위한 백엔드 설정" -#. translators: command line help text for service activation action -#: src/clients/samba-server.rb:119 +#. translators: command line help text for service activation action +#: src/clients/samba-server.rb:119 msgid "Enable or disable the Samba services (smb and nmb)" msgstr "삼바 서비스(smb와 nmb)의 활성화 또는 비활성화" -#. translators: command line help text for configure action -#: src/clients/samba-server.rb:129 +#. translators: command line help text for configure action +#: src/clients/samba-server.rb:129 msgid "Change the global settings of the Samba server" msgstr "Samba 서버의 전체적인 설정 변경" -#. translators: command line help text for enable option -#: src/clients/samba-server.rb:137 +#. translators: command line help text for enable option +#: src/clients/samba-server.rb:137 msgid "Enable the share or a service" msgstr "공유 또는 서비스 활성화" -#. translators: command line help text for disable option -#: src/clients/samba-server.rb:143 +#. translators: command line help text for disable option +#: src/clients/samba-server.rb:143 msgid "Disable the share or a service" msgstr "공유 또는 서비스 비활성화" -#. translators: command line help text for delete share option -#: src/clients/samba-server.rb:149 +#. translators: command line help text for delete share option +#: src/clients/samba-server.rb:149 msgid "Remove the share from the configuration file" msgstr "설정 파일에서 공유 삭제" -#. translators: command line help text for share name option -#: src/clients/samba-server.rb:155 +#. translators: command line help text for share name option +#: src/clients/samba-server.rb:155 msgid "The name of a share" msgstr "공유의 이름" -#. translators: command line help text for "share add" subaction -#: src/clients/samba-server.rb:162 +#. translators: command line help text for "share add" subaction +#: src/clients/samba-server.rb:162 msgid "Add a new share" msgstr "새로운 사용자 추가" -#. translators: command line help text for "share options" subaction -#: src/clients/samba-server.rb:168 +#. translators: command line help text for "share options" subaction +#: src/clients/samba-server.rb:168 msgid "Change options of a share" msgstr "공유의 옵션 변경" -#. translators: command line help text for "share show" subaction -#: src/clients/samba-server.rb:174 +#. translators: command line help text for "share show" subaction +#: src/clients/samba-server.rb:174 msgid "Show the options of a share" msgstr "공유의 옵션 보기" -#. translators: command line help text for share comment option -#: src/clients/samba-server.rb:180 +#. translators: command line help text for share comment option +#: src/clients/samba-server.rb:180 msgid "The comment of a share" msgstr "공유의 설명" -#. translators: command line help text for share path option -#: src/clients/samba-server.rb:187 +#. translators: command line help text for share path option +#: src/clients/samba-server.rb:187 msgid "The path (directory) to share" msgstr "공유할 경로(디렉토리 경로)" -#. translators: command line help text for share printable option -#: src/clients/samba-server.rb:194 +#. translators: command line help text for share printable option +#: src/clients/samba-server.rb:194 msgid "Flag if the share should act as a printer" msgstr "만약 프린터 공유이면 표시됩니다." -#. translators: command line help text for share read_list option -#: src/clients/samba-server.rb:201 +#. translators: command line help text for share read_list option +#: src/clients/samba-server.rb:201 msgid "A comma-separated list of users allowed to read from the share" msgstr "공유의 읽기가 허용된 사용자들의 콤마로 구분된 목록입니다." -#. translators: command line help text for share write_list option -#: src/clients/samba-server.rb:208 +#. translators: command line help text for share write_list option +#: src/clients/samba-server.rb:208 msgid "A comma-separated list of users allowed to write to the share" msgstr "공유의 쓰기가 허용된 사용자들의 콤마로 구분된 목록입니다." -#. translators: command line help text for share browseable option -#: src/clients/samba-server.rb:215 +#. translators: command line help text for share browseable option +#: src/clients/samba-server.rb:215 msgid "Flag if the share should be visible when browsing the LAN" msgstr "LAN을 검색할 때 공유를 보이게 하려면 플래그를 설정하십시오." -#. translators: command line help text for share guest_ok option -#: src/clients/samba-server.rb:222 +#. translators: command line help text for share guest_ok option +#: src/clients/samba-server.rb:222 msgid "Flag if the share should allow guest access" msgstr "만약 공유가 guest 접근을 허용한다면 표시됩니다." -#. translators: command line help text for share valid_users option -#: src/clients/samba-server.rb:229 +#. translators: command line help text for share valid_users option +#: src/clients/samba-server.rb:229 msgid "A comma-separated list of users allowed to access the share" msgstr "공유에 접근이 허용된 사용자들의 콤마로 구분된 목록입니다." -#. translators: command line help text for PDC role option -#: src/clients/samba-server.rb:236 +#. translators: command line help text for PDC role option +#: src/clients/samba-server.rb:236 msgid "Server should act as a primary domain controller" msgstr "서버는 주 도메인 컨트롤러의 역할을 수행해야 합니다." -#. translators: command line help text for BDC role option -#: src/clients/samba-server.rb:242 +#. translators: command line help text for BDC role option +#: src/clients/samba-server.rb:242 msgid "Server should act as a backup domain controller" msgstr "서버는 백업 도메인 컨트롤러의 역할을 수행해야 합니다." -#. translators: command line help text for Domain Member role option -#: src/clients/samba-server.rb:248 +#. translators: command line help text for Domain Member role option +#: src/clients/samba-server.rb:248 msgid "Server should act as a domain member" msgstr "서버는 도메인 구성원의 역할을 수행해야 합니다." -#. translators: command line help text for standalone server role option -#: src/clients/samba-server.rb:254 +#. translators: command line help text for standalone server role option +#: src/clients/samba-server.rb:254 msgid "Server should provide shares, but should not allow domain logins" msgstr "서버는 공유를 제공해야 하지만 도메인 로그인은 허용하지 않습니다." -#. translators: command line help text for smbpasswd option -#: src/clients/samba-server.rb:260 +#. translators: command line help text for smbpasswd option +#: src/clients/samba-server.rb:260 msgid "Use the 'smbpasswd' file to store user information" msgstr "사용자의 정보를 저장하려면 'smbpasswd' 파일을 사용하십시오." -#. translators: command line help text for tdbsam option -#: src/clients/samba-server.rb:266 +#. translators: command line help text for tdbsam option +#: src/clients/samba-server.rb:266 msgid "Use the 'passdb.tdb' file to store user information" msgstr "사용자 정보를 저장하려면 'passdb.tdb' 파일을 사용하십시오." -#. translators: command line help text for ldapsam option -#: src/clients/samba-server.rb:272 +#. translators: command line help text for ldapsam option +#: src/clients/samba-server.rb:272 msgid "Use the LDAP server to store user information" msgstr "사용자 정보를 저장하려면 LDAP 서버를 사용하십시오." -#. translators: command line help text for password option -#: src/clients/samba-server.rb:278 +#. translators: command line help text for password option +#: src/clients/samba-server.rb:278 msgid "Password for the LDAP server" msgstr "LDAP 서버에 대한 비밀번호" -#. translators: command line help text for workgroup option -#: src/clients/samba-server.rb:284 +#. translators: command line help text for workgroup option +#: src/clients/samba-server.rb:284 msgid "The name of a workgroup" msgstr "작업 그룹의 이름" -#. translators: command line help text for description option -#: src/clients/samba-server.rb:291 +#. translators: command line help text for description option +#: src/clients/samba-server.rb:291 msgid "The human-readable description of the Samba server" msgstr "읽을 수 있는 Samba 서버에 대한 설명" -#. translators: command line help text for ldap_suffix option -#: src/clients/samba-server.rb:298 -msgid "" -"The LDAP suffix DN for manipulating the user information on the LDAP server" +#. translators: command line help text for ldap_suffix option +#: src/clients/samba-server.rb:298 +msgid "The LDAP suffix DN for manipulating the user information on the LDAP server" msgstr "LDAP 서버에서 사용자 정보를 조정하기 위한 LDAP suffix DN" -#. translators: command line help text for ldap_admin_dn option -#: src/clients/samba-server.rb:305 -msgid "" -"The LDAP DN for modifying contents of the LDAP server (for example, changing " -"passwords)" +#. translators: command line help text for ldap_admin_dn option +#: src/clients/samba-server.rb:305 +msgid "The LDAP DN for modifying contents of the LDAP server (for example, changing passwords)" msgstr "LDAP 서버의 내용(예, 비밀번호 수정)을 수정하기 위한 LDAP DN" -#. translators: error message for share command line action -#. must provide the share name -#: src/clients/samba-server.rb:374 +#. translators: error message for share command line action +#. must provide the share name +#: src/clients/samba-server.rb:374 msgid "Specify the share name." msgstr "공유 이름을 입력하십시오." -#. translators: error message for "share add" command line action, %1 is share name -#: src/clients/samba-server.rb:380 +#. translators: error message for "share add" command line action, %1 is share name +#: src/clients/samba-server.rb:380 msgid "The share %1 does not exist." msgstr "%1 공유는 존재하지 않습니다." -#. translators: error message for "add share" command line action -#: src/clients/samba-server.rb:394 +#. translators: error message for "add share" command line action +#: src/clients/samba-server.rb:394 msgid "Provide the path of a directory to share." msgstr "공유할 디렉토리의 경로를 제공하십시오." -#. translators: error message for "add share" command line action, %1 is share name -#. translators: popup error message for "add share", %1 is share name -#: src/clients/samba-server.rb:400 src/include/samba-server/dialogs.rb:1071 +#. translators: error message for "add share" command line action, %1 is share name +#. translators: popup error message for "add share", %1 is share name +#: src/clients/samba-server.rb:400 src/include/samba-server/dialogs.rb:1071 msgid "Share %1 already exists." msgstr "%1 공유는 이미 존재합니다." -#. translators: heading for "list" shares command line action -#. try to keep alignment -#: src/clients/samba-server.rb:450 +#. translators: heading for "list" shares command line action +#. try to keep alignment +#: src/clients/samba-server.rb:450 msgid "" "Status \tType\tName\n" "==============================" @@ -219,38 +216,37 @@ "상태 \t종류\t이름\n" "==============================" -#. translators: share is a disk. %1 is the status, %2 comment -#: src/clients/samba-server.rb:460 +#. translators: share is a disk. %1 is the status, %2 comment +#: src/clients/samba-server.rb:460 msgid "%1\tDisk\t%2" msgstr "%1\t디스크\t%2" -#. translators: share status -#. translators: share status -#: src/clients/samba-server.rb:463 src/clients/samba-server.rb:481 -#: src/include/samba-server/dialogs.rb:146 +#. translators: share status +#. translators: share status +#: src/clients/samba-server.rb:463 src/clients/samba-server.rb:481 +#: src/include/samba-server/dialogs.rb:146 msgid "Disabled" msgstr "비활성화" -#. translators: share status -#. translators: share status -#. check if given path has a corresponding snapper configuration -#: src/clients/samba-server.rb:465 src/clients/samba-server.rb:483 -#: src/include/samba-server/dialogs.rb:146 +#. translators: share status +#. translators: share status +#. check if given path has a corresponding snapper configuration +#: src/clients/samba-server.rb:465 src/clients/samba-server.rb:483 +#: src/include/samba-server/dialogs.rb:146 msgid "Enabled" msgstr "활성화" -#. translators: share is a printer. %1 is the status, %2 comment -#: src/clients/samba-server.rb:478 +#. translators: share is a printer. %1 is the status, %2 comment +#: src/clients/samba-server.rb:478 msgid "%1\tPrinter\t%2" msgstr "%1\t프린터\t%2" -#. TRANSLATORS: a popup message -#: src/include/samba-server/complex.rb:88 +#. TRANSLATORS: a popup message +#: src/include/samba-server/complex.rb:88 msgid "" "Because users are currently connected to this Samba server,\n" "the server configuration has been reloaded instead of restarted.\n" -"To confirm that all settings are applied despite possibly disconnecting the " -"users,\n" +"To confirm that all settings are applied despite possibly disconnecting the users,\n" "run 'systemctl restart smb' and 'systemctl restart nmb'" msgstr "" "현재 이 Samba 서버에 사용자가 연결되어 있기 때문에,\n" @@ -258,92 +254,92 @@ "사용자 연결이 끊어지더라도 모든 설정을 확실하게 적용하려면\n" "'systemctl restart smb' 및 'systemctl restart nmb'를 실행하십시오." -#. table entry description for smbpasswd-based SAM -#: src/include/samba-server/dialogs-items.rb:146 +#. table entry description for smbpasswd-based SAM +#: src/include/samba-server/dialogs-items.rb:146 msgid "smbpasswd file" msgstr "smbpasswd 파일" -#. table entry description for LDAP-based SAM -#. Unknown passdb backend -#. // translators: passdb backend radio button -#. `Left (`RadioButton ( `id("mysql"), `opt (`notify),_("MySQL Database") ) ) -#. translators: passdb backend radio button -#: src/include/samba-server/dialogs-items.rb:155 -#: src/include/samba-server/dialogs-items.rb:598 +#. table entry description for LDAP-based SAM +#. Unknown passdb backend +#. // translators: passdb backend radio button +#. `Left (`RadioButton ( `id("mysql"), `opt (`notify),_("MySQL Database") ) ) +#. translators: passdb backend radio button +#: src/include/samba-server/dialogs-items.rb:155 +#: src/include/samba-server/dialogs-items.rb:598 msgid "LDAP" msgstr "LDAP" -#. table entry description for TDB-based SAM -#: src/include/samba-server/dialogs-items.rb:169 +#. table entry description for TDB-based SAM +#: src/include/samba-server/dialogs-items.rb:169 msgid "TDB database" msgstr "TDB 데이터베이스" -#. TRANSLATORS: popup error -#: src/include/samba-server/dialogs-items.rb:261 +#. TRANSLATORS: popup error +#: src/include/samba-server/dialogs-items.rb:261 msgid "Optional value must not begin with a space character." msgstr "옵션 값은 공백으로 시작하면 안 됩니다." -#. TRANSLATORS: popup error -#: src/include/samba-server/dialogs-items.rb:279 +#. TRANSLATORS: popup error +#: src/include/samba-server/dialogs-items.rb:279 msgid "Multiple optional values for one backend must be quoted." msgstr "하나의 백 엔드에 대한 여러 선택적 값은 따옴표로 묶어야 합니다." -#. TRANSLATORS: popup error, %1 is replaced with some URL -#. TRANSLATORS: popup error, %1 is replaced with some URL -#: src/include/samba-server/dialogs-items.rb:291 -#: src/include/samba-server/dialogs-items.rb:300 +#. TRANSLATORS: popup error, %1 is replaced with some URL +#. TRANSLATORS: popup error, %1 is replaced with some URL +#: src/include/samba-server/dialogs-items.rb:291 +#: src/include/samba-server/dialogs-items.rb:300 msgid "The entered URL '%1' is invalid" msgstr "입력한 URL '%1'이(가) 잘못되었습니다." -#. message popup -#. message popup -#: src/include/samba-server/dialogs-items.rb:352 -#: src/include/samba-server/dialogs-items.rb:405 +#. message popup +#. message popup +#: src/include/samba-server/dialogs-items.rb:352 +#: src/include/samba-server/dialogs-items.rb:405 msgid "Delete the selected entry?" msgstr "선택한 옵션을 삭제하시겠습니까?" -#. we are already initialized -#: src/include/samba-server/dialogs-items.rb:481 +#. we are already initialized +#: src/include/samba-server/dialogs-items.rb:481 msgid "At least one backend must be specified." msgstr "백 엔드를 하나 이상 지정해야 합니다." -#. if (size (passdb_backends) == 1) -#. { -#. // error message if user tries to delete the last passdb backend -#. Report::Error (_("At least one back-end must be specified. -#. -#. The back-end cannot be deleted. -#. ")); -#. return false; -#. } -#. message popup -#: src/include/samba-server/dialogs-items.rb:568 +#. if (size (passdb_backends) == 1) +#. { +#. // error message if user tries to delete the last passdb backend +#. Report::Error (_("At least one back-end must be specified. +#. +#. The back-end cannot be deleted. +#. ")); +#. return false; +#. } +#. message popup +#: src/include/samba-server/dialogs-items.rb:568 msgid "Delete the selected back-end?" msgstr "선택한 백 엔드를 삭제하시겠습니까?" -#. translators: frame text when adding a passdb backend -#: src/include/samba-server/dialogs-items.rb:583 +#. translators: frame text when adding a passdb backend +#: src/include/samba-server/dialogs-items.rb:583 msgid "Back-End Type" msgstr "백 엔드 형식" -#. translators: passdb backend radio button -#: src/include/samba-server/dialogs-items.rb:592 +#. translators: passdb backend radio button +#: src/include/samba-server/dialogs-items.rb:592 msgid "smbpasswd File" msgstr "smbpasswd 파일" -#. translators: passdb backend radio button -#: src/include/samba-server/dialogs-items.rb:600 +#. translators: passdb backend radio button +#: src/include/samba-server/dialogs-items.rb:600 msgid "TDB Database" msgstr "TDB 데이터베이스" -#. translators: textentry label to enter details for the selected passdb backend -#: src/include/samba-server/dialogs-items.rb:605 +#. translators: textentry label to enter details for the selected passdb backend +#: src/include/samba-server/dialogs-items.rb:605 msgid "&Details" msgstr "세부 사항(&D)" -#. translators: error message, if the MySQL backend -#. is selected, but no details are entered -#: src/include/samba-server/dialogs-items.rb:648 +#. translators: error message, if the MySQL backend +#. is selected, but no details are entered +#: src/include/samba-server/dialogs-items.rb:648 msgid "" "An identifier must be provided\n" "in details \n" @@ -359,117 +355,117 @@ " 자세한 내용은 Samba HOWTO collection을\n" " 참조하십시오.\n" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/samba-server/dialogs.ycp -#. Package: Configuration of samba-server -#. Summary: Dialogs definitions -#. Authors: Stanislav Visnovsky -#. Lukas Ocilka -#. -#. $Id$ -#: src/include/samba-server/dialogs.rb:69 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/samba-server/dialogs.ycp +#. Package: Configuration of samba-server +#. Summary: Dialogs definitions +#. Authors: Stanislav Visnovsky +#. Lukas Ocilka +#. +#. $Id$ +#: src/include/samba-server/dialogs.rb:69 msgid "&Primary Domain Controller (PDC)" msgstr "주 도메인 컨트롤러(PDC)(&P)" -#: src/include/samba-server/dialogs.rb:70 +#: src/include/samba-server/dialogs.rb:70 msgid "B&ackup Domain Controller (BDC)" msgstr "백업 도메인 컨트롤러(BDC)(&A)" -#: src/include/samba-server/dialogs.rb:71 +#: src/include/samba-server/dialogs.rb:71 msgid "Not a Domain &Controller" msgstr "도메인 컨트롤러 아님(&C)" -#. Samba LDAP Settings Misc Widget -#. ///////////////////////////////////////////////////////////////////////// -#. translators: combo box value -#: src/include/samba-server/dialogs.rb:153 -#: src/include/samba-server/dialogs.rb:156 -#: src/include/samba-server/ldap-widget.rb:76 +#. Samba LDAP Settings Misc Widget +#. ///////////////////////////////////////////////////////////////////////// +#. translators: combo box value +#: src/include/samba-server/dialogs.rb:153 +#: src/include/samba-server/dialogs.rb:156 +#: src/include/samba-server/ldap-widget.rb:76 msgid "Yes" msgstr "예" -#. Samba LDAP Settings Security Widget -#. ///////////////////////////////////////////////////////////////////////// -#. translators: combo box value -#. translators: combo box value -#: src/include/samba-server/dialogs.rb:153 -#: src/include/samba-server/dialogs.rb:156 -#: src/include/samba-server/ldap-widget.rb:65 -#: src/include/samba-server/ldap-widget.rb:78 +#. Samba LDAP Settings Security Widget +#. ///////////////////////////////////////////////////////////////////////// +#. translators: combo box value +#. translators: combo box value +#: src/include/samba-server/dialogs.rb:153 +#: src/include/samba-server/dialogs.rb:156 +#: src/include/samba-server/ldap-widget.rb:65 +#: src/include/samba-server/ldap-widget.rb:78 msgid "No" msgstr "아니오" -#: src/include/samba-server/dialogs.rb:171 -#: src/include/samba-server/dialogs.rb:236 +#: src/include/samba-server/dialogs.rb:171 +#: src/include/samba-server/dialogs.rb:236 msgid "Samba Installation" msgstr "Samba 설치" -#: src/include/samba-server/dialogs.rb:171 +#: src/include/samba-server/dialogs.rb:171 msgid "Step 1 of 2" msgstr "2단계 중 1단계" -#. `ComboBox ( `id( "workgroups" ), `opt( `editable ), _("&Workgroup or Domain Name"), workgroups ) -#. TRANSLATORS: text entry -#. `ComboBox(`id("workgroup_domainname"), `opt(`editable, `hstretch), _("&Workgroup or Domain Name"), -#. SambaNmbLookup::GetAvailableNeighbours(nil)), -#: src/include/samba-server/dialogs.rb:191 -#: src/include/samba-server/dialogs.rb:1188 +#. `ComboBox ( `id( "workgroups" ), `opt( `editable ), _("&Workgroup or Domain Name"), workgroups ) +#. TRANSLATORS: text entry +#. `ComboBox(`id("workgroup_domainname"), `opt(`editable, `hstretch), _("&Workgroup or Domain Name"), +#. SambaNmbLookup::GetAvailableNeighbours(nil)), +#: src/include/samba-server/dialogs.rb:191 +#: src/include/samba-server/dialogs.rb:1188 msgid "&Workgroup or Domain Name" msgstr "작업 그룹 또는 도메인 이름(&W)" -#: src/include/samba-server/dialogs.rb:236 +#: src/include/samba-server/dialogs.rb:236 msgid "Step 2 of 2" msgstr "2단계 중 2단계" -#. header of status-like information. followed by domain name -#: src/include/samba-server/dialogs.rb:245 +#. header of status-like information. followed by domain name +#: src/include/samba-server/dialogs.rb:245 msgid "Current Domain Name:" msgstr "현재 도메인 이름:" -#: src/include/samba-server/dialogs.rb:250 +#: src/include/samba-server/dialogs.rb:250 msgid "Samba Server Type" msgstr "Samba 서버 형식" -#. appears on new line after Primary Domain Controller radio button -#: src/include/samba-server/dialogs.rb:263 +#. appears on new line after Primary Domain Controller radio button +#: src/include/samba-server/dialogs.rb:263 msgid "Not available because a PDC is present." msgstr "PDC가 있기 때문에 사용할 수 없습니다." -#. TRANSLATORS: dialog caption -#: src/include/samba-server/dialogs.rb:584 +#. TRANSLATORS: dialog caption +#: src/include/samba-server/dialogs.rb:584 msgid "Rename Share" msgstr "공유 이름 변경" -#. TRANSLATORS: text entry -#: src/include/samba-server/dialogs.rb:593 +#. TRANSLATORS: text entry +#: src/include/samba-server/dialogs.rb:593 msgid "New Share &Name" msgstr "새 공유 이름(&N)" -#. TRANSLATORS: popup error message -#: src/include/samba-server/dialogs.rb:622 +#. TRANSLATORS: popup error message +#: src/include/samba-server/dialogs.rb:622 msgid "Enter a new share name." msgstr "새 공유 이름을 입력하십시오." -#. TRANSLATORS: popup error message, %1 is a variable share name -#: src/include/samba-server/dialogs.rb:631 +#. TRANSLATORS: popup error message, %1 is a variable share name +#: src/include/samba-server/dialogs.rb:631 msgid "" "Share '%1' already exists.\n" "Choose another share name.\n" @@ -477,8 +473,8 @@ "'%1' 공유가 이미 존재합니다.\n" "다른 공유 이름을 선택하십시오.\n" -#. confirmation dialog before deleting a share -#: src/include/samba-server/dialogs.rb:727 +#. confirmation dialog before deleting a share +#: src/include/samba-server/dialogs.rb:727 msgid "" "If you delete share %1,\n" "all its settings will be lost.\n" @@ -488,27 +484,27 @@ "모든 해당 설정을 잃게 됩니다.\n" " 삭제하시겠습니까?" -#. rwalter I couldn't make this one show up. Please make sure my deletions didn't make it too confusing. -#: src/include/samba-server/dialogs.rb:757 +#. rwalter I couldn't make this one show up. Please make sure my deletions didn't make it too confusing. +#: src/include/samba-server/dialogs.rb:757 msgid "Trusted &Domain" msgstr "트러스트된 도메인(&D)" -#. text entry label -#: src/include/samba-server/dialogs.rb:758 -#: src/include/samba-server/dialogs.rb:1722 +#. text entry label +#: src/include/samba-server/dialogs.rb:758 +#: src/include/samba-server/dialogs.rb:1722 msgid "&Password" msgstr "비밀번호(&P)" -#: src/include/samba-server/dialogs.rb:779 +#: src/include/samba-server/dialogs.rb:779 msgid "Domain name cannot be empty." msgstr "도메인 이름은 비워 둘 수 없습니다." -#: src/include/samba-server/dialogs.rb:785 +#: src/include/samba-server/dialogs.rb:785 msgid "Cannot establish trusted domain relationship." msgstr "트러스트된 도메인 관계를 설정할 수 없습니다." -#. issue a warning, if not already done so -#: src/include/samba-server/dialogs.rb:801 +#. issue a warning, if not already done so +#: src/include/samba-server/dialogs.rb:801 msgid "" "The password for trusted domains\n" "is stored in the autoinstallation control file. The password\n" @@ -520,15 +516,15 @@ " 일반 텍스트로 저장됩니다. 이는 보안상 위협 요소가\n" " 될 수 있습니다." -#. SambaTrustDom::List() might return 'nil' -#: src/include/samba-server/dialogs.rb:823 -#: src/include/samba-server/dialogs.rb:1220 -#: src/include/samba-server/dialogs.rb:1336 +#. SambaTrustDom::List() might return 'nil' +#: src/include/samba-server/dialogs.rb:823 +#: src/include/samba-server/dialogs.rb:1220 +#: src/include/samba-server/dialogs.rb:1336 msgid "&Trusted Domains" msgstr "트러스트된 도메인(&N)" -#. confirmation -#: src/include/samba-server/dialogs.rb:844 +#. confirmation +#: src/include/samba-server/dialogs.rb:844 msgid "" "Really abandon trust relationship\n" "to trusted domain %1?" @@ -536,233 +532,233 @@ "트러스트된 도메인 %1와(과)의\n" "트러스트 관계를 해제하시겠습니까?" -#. dialog caption -#: src/include/samba-server/dialogs.rb:864 +#. dialog caption +#: src/include/samba-server/dialogs.rb:864 msgid "Share %1" msgstr "%1 공유" -#. dialog caption -#: src/include/samba-server/dialogs.rb:888 +#. dialog caption +#: src/include/samba-server/dialogs.rb:888 msgid "Expert Global Settings Configuration" msgstr "고급 전역 설정 구성" -#. frame label -#: src/include/samba-server/dialogs.rb:920 +#. frame label +#: src/include/samba-server/dialogs.rb:920 msgid "Identification" msgstr "ID" -#. text entry label -#: src/include/samba-server/dialogs.rb:922 +#. text entry label +#: src/include/samba-server/dialogs.rb:922 msgid "Share &Name" msgstr "공유 이름(&N)" -#. text entry label -#: src/include/samba-server/dialogs.rb:924 +#. text entry label +#: src/include/samba-server/dialogs.rb:924 msgid "Share &Description" msgstr "공유 설명(&D)" -#. frame label -#: src/include/samba-server/dialogs.rb:928 +#. frame label +#: src/include/samba-server/dialogs.rb:928 msgid "Share Type" msgstr "공유 형식" -#. radio button label -#: src/include/samba-server/dialogs.rb:933 +#. radio button label +#: src/include/samba-server/dialogs.rb:933 msgid "&Printer" msgstr "프린터(&P)" -#. radio button label -#: src/include/samba-server/dialogs.rb:935 +#. radio button label +#: src/include/samba-server/dialogs.rb:935 msgid "&Directory" msgstr "디렉토리(&D)" -#. translators: text entry label -#: src/include/samba-server/dialogs.rb:939 +#. translators: text entry label +#: src/include/samba-server/dialogs.rb:939 msgid "Share &Path" msgstr "공유 경로(&P)" -#. translators: checkbox label, setting for share -#: src/include/samba-server/dialogs.rb:946 +#. translators: checkbox label, setting for share +#: src/include/samba-server/dialogs.rb:946 msgid "&Read-Only" msgstr "읽기 전용(&R)" -#. checkbox label -#: src/include/samba-server/dialogs.rb:948 +#. checkbox label +#: src/include/samba-server/dialogs.rb:948 msgid "&Inherit ACLs" msgstr "ACL 상속(&I)" -#. checkbox label -#: src/include/samba-server/dialogs.rb:950 +#. checkbox label +#: src/include/samba-server/dialogs.rb:950 msgid "Expose Snapshots" msgstr "스냅샷 노출" -#. checkbox label -#: src/include/samba-server/dialogs.rb:952 +#. checkbox label +#: src/include/samba-server/dialogs.rb:952 msgid "Utilize Btrfs Features" msgstr "Btrfs 기능 활용" -#. translators: dialog caption -#: src/include/samba-server/dialogs.rb:961 +#. translators: dialog caption +#: src/include/samba-server/dialogs.rb:961 msgid "New Share" msgstr "새 공유" -#. translators: file selection dialog title -#: src/include/samba-server/dialogs.rb:1007 +#. translators: file selection dialog title +#: src/include/samba-server/dialogs.rb:1007 msgid "Path for a Share" msgstr "공유 경로" -#. translators: error message -#: src/include/samba-server/dialogs.rb:1031 +#. translators: error message +#: src/include/samba-server/dialogs.rb:1031 msgid "Share name cannot be empty." msgstr "공유의 이름은 생략할 수 없습니다." -#. translators: error message -#: src/include/samba-server/dialogs.rb:1036 +#. translators: error message +#: src/include/samba-server/dialogs.rb:1036 msgid "Share path cannot be empty." msgstr "공유의 경로는 생략할 수 없습니다." -#: src/include/samba-server/dialogs.rb:1089 +#: src/include/samba-server/dialogs.rb:1089 msgid "Available Shares" msgstr "사용 가능한 공유" -#: src/include/samba-server/dialogs.rb:1093 +#: src/include/samba-server/dialogs.rb:1093 msgid "&Filter" msgstr "필터(&F)" -#: src/include/samba-server/dialogs.rb:1095 +#: src/include/samba-server/dialogs.rb:1095 msgid "Show &All Shares" msgstr "모든 공유 표시(&A)" -#: src/include/samba-server/dialogs.rb:1098 +#: src/include/samba-server/dialogs.rb:1098 msgid "Do Not Show &System Shares" msgstr "시스템 공유를 표시하지 않음(&S)" -#. translators: table header texts -#: src/include/samba-server/dialogs.rb:1109 +#. translators: table header texts +#: src/include/samba-server/dialogs.rb:1109 msgid "Status" msgstr "상태" -#: src/include/samba-server/dialogs.rb:1110 +#: src/include/samba-server/dialogs.rb:1110 msgid "Read-Only" msgstr "읽기 전용" -#: src/include/samba-server/dialogs.rb:1111 +#: src/include/samba-server/dialogs.rb:1111 msgid "Name" msgstr "이름" -#: src/include/samba-server/dialogs.rb:1112 +#: src/include/samba-server/dialogs.rb:1112 msgid "Path" msgstr "경로" -#: src/include/samba-server/dialogs.rb:1113 -#: src/include/samba-server/dialogs.rb:1124 +#: src/include/samba-server/dialogs.rb:1113 +#: src/include/samba-server/dialogs.rb:1124 msgid "Guest Access" msgstr "게스트 액세스(&E)" -#: src/include/samba-server/dialogs.rb:1114 +#: src/include/samba-server/dialogs.rb:1114 msgid "Comment" msgstr "주석" -#: src/include/samba-server/dialogs.rb:1123 +#: src/include/samba-server/dialogs.rb:1123 msgid "&Rename..." msgstr "이름 변경(&R)..." -#: src/include/samba-server/dialogs.rb:1125 +#: src/include/samba-server/dialogs.rb:1125 msgid "&Toggle Status" msgstr "상태 토글(&T)" -#: src/include/samba-server/dialogs.rb:1143 +#: src/include/samba-server/dialogs.rb:1143 msgid "WINS Server Support" msgstr "WINS 서버 지원" -#: src/include/samba-server/dialogs.rb:1150 +#: src/include/samba-server/dialogs.rb:1150 msgid "Remote WINS Server" msgstr "원격 WINS 서버" -#: src/include/samba-server/dialogs.rb:1155 +#: src/include/samba-server/dialogs.rb:1155 msgid "Na&me" msgstr "이름(&M)" -#. TRANSLATORS: check box -#: src/include/samba-server/dialogs.rb:1165 +#. TRANSLATORS: check box +#: src/include/samba-server/dialogs.rb:1165 msgid "Use WINS for Hostname Resolution" msgstr "호스트 이름 인식에 WINS 사용(&F)" -#. translators: combobox item -#: src/include/samba-server/dialogs.rb:1170 +#. translators: combobox item +#: src/include/samba-server/dialogs.rb:1170 msgid "Not a DC" msgstr "DC 아님" -#. translators: combobox item -#: src/include/samba-server/dialogs.rb:1172 +#. translators: combobox item +#: src/include/samba-server/dialogs.rb:1172 msgid "Primary (PDC)" msgstr "주(PDC)" -#. translators: combobox item -#: src/include/samba-server/dialogs.rb:1176 +#. translators: combobox item +#: src/include/samba-server/dialogs.rb:1176 msgid "Backup (BDC)" msgstr "백업(BDC)" -#: src/include/samba-server/dialogs.rb:1179 +#: src/include/samba-server/dialogs.rb:1179 msgid "Base Settings" msgstr "기본 설정" -#. translators: combobox label -#: src/include/samba-server/dialogs.rb:1194 +#. translators: combobox label +#: src/include/samba-server/dialogs.rb:1194 msgid "Domain &Controller" msgstr "도메인 컨트롤러(&A)" -#: src/include/samba-server/dialogs.rb:1204 +#: src/include/samba-server/dialogs.rb:1204 msgid "Advanced Settings..." msgstr "고급 설정..." -#: src/include/samba-server/dialogs.rb:1206 +#: src/include/samba-server/dialogs.rb:1206 msgid "&Expert Global Settings" msgstr "고급 전역 설정(&E)" -#: src/include/samba-server/dialogs.rb:1207 +#: src/include/samba-server/dialogs.rb:1207 msgid "&User Authentication Sources" msgstr "사용자 인증 원본(&U)" -#: src/include/samba-server/dialogs.rb:1237 +#: src/include/samba-server/dialogs.rb:1237 msgid "Samba Configuration" msgstr "Samba 구성" -#. tab label -#: src/include/samba-server/dialogs.rb:1242 +#. tab label +#: src/include/samba-server/dialogs.rb:1242 msgid "Start-&Up" msgstr "시작(&U)" -#: src/include/samba-server/dialogs.rb:1260 +#: src/include/samba-server/dialogs.rb:1260 msgid "&Shares" msgstr "공유(&S)" -#. BNC #579993, Allow guest access -#: src/include/samba-server/dialogs.rb:1283 +#. BNC #579993, Allow guest access +#: src/include/samba-server/dialogs.rb:1283 msgid "I&dentity" msgstr "ID(&D)" -#: src/include/samba-server/dialogs.rb:1298 +#: src/include/samba-server/dialogs.rb:1298 msgid "WINS" msgstr "WINS" -#: src/include/samba-server/dialogs.rb:1341 +#: src/include/samba-server/dialogs.rb:1341 msgid "&LDAP Settings" msgstr "LDAP 설정(&L)" -#. BNC #247344, BNC #541958 (comment #18) -#: src/include/samba-server/dialogs.rb:1464 +#. BNC #247344, BNC #541958 (comment #18) +#: src/include/samba-server/dialogs.rb:1464 msgid "NetBIOS &Hostname" msgstr "NetBIOS 호스트 이름(&H)" -#. dialog caption -#: src/include/samba-server/dialogs.rb:1565 +#. dialog caption +#: src/include/samba-server/dialogs.rb:1565 msgid "User Information Sources" msgstr "사용자 정보 원본" -#. try to create it -#. first, ask for password -#: src/include/samba-server/dialogs.rb:1619 +#. try to create it +#. first, ask for password +#: src/include/samba-server/dialogs.rb:1619 msgid "" "For a proper function, Samba server needs an\n" "administrative account (root).\n" @@ -772,16 +768,16 @@ "필요합니다.\n" " 지금 생성됩니다." -#: src/include/samba-server/dialogs.rb:1625 +#: src/include/samba-server/dialogs.rb:1625 msgid "Samba root &Password" msgstr "Samba 루트 비밀번호(&P)" -#: src/include/samba-server/dialogs.rb:1626 +#: src/include/samba-server/dialogs.rb:1626 msgid "&Verify Password" msgstr "비밀번호 확인(&V)" -#. TRANSLATORS: popup error message -#: src/include/samba-server/dialogs.rb:1646 +#. TRANSLATORS: popup error message +#: src/include/samba-server/dialogs.rb:1646 msgid "" "The first and the second version\n" "of the password do not match." @@ -789,13 +785,13 @@ "첫 번째와 두 번째 비밀번호가\n" "일치하지 않습니다." -#. TRANSLATORS: popup error message, %1 is a username -#: src/include/samba-server/dialogs.rb:1663 +#. TRANSLATORS: popup error message, %1 is a username +#: src/include/samba-server/dialogs.rb:1663 msgid "Cannot create account for user %1." msgstr "사용자 %1의 계정을 생성할 수 없습니다." -#. translators: popup to fill in the domain joining info; %1 is the domain name -#: src/include/samba-server/dialogs.rb:1705 +#. translators: popup to fill in the domain joining info; %1 is the domain name +#: src/include/samba-server/dialogs.rb:1705 msgid "" "Enter the username and the password\n" "for joining the domain %1." @@ -803,7 +799,7 @@ "%1 도메인에 가입하기 위한 사용자\n" "이름과 암호를 입력하십시오." -#: src/include/samba-server/dialogs.rb:1712 +#: src/include/samba-server/dialogs.rb:1712 msgid "" "To join the domain anonymously, leave the\n" "text entries empty." @@ -811,23 +807,23 @@ "도메인에 익명으로 가입하려면 텍스트 항목을\n" "비워 두십시오." -#. text entry label -#: src/include/samba-server/dialogs.rb:1720 +#. text entry label +#: src/include/samba-server/dialogs.rb:1720 msgid "&Username" msgstr "사용자 이름(&U)" -#. translators: button label to skip joining to domain -#: src/include/samba-server/dialogs.rb:1725 +#. translators: button label to skip joining to domain +#: src/include/samba-server/dialogs.rb:1725 msgid "Do &Not Join" msgstr "가입하지 않음(&N)" -#. Translators: Information popup, %1 is the name of the domain -#: src/include/samba-server/dialogs.rb:1761 +#. Translators: Information popup, %1 is the name of the domain +#: src/include/samba-server/dialogs.rb:1761 msgid "Domain %1 joined successfully." msgstr "%1 도메인에 성공적으로 가입했습니다." -#. Read dialog help 1/2 -#: src/include/samba-server/helps.rb:37 +#. Read dialog help 1/2 +#: src/include/samba-server/helps.rb:37 msgid "" "<p><b><big>Initializing Samba Server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -835,8 +831,8 @@ "<p><b><big>Samba 서버의 설정을 초기화하는 중입니다</big></b>\n" "<br>기다려주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/samba-server/helps.rb:41 +#. Read dialog help 2/2 +#: src/include/samba-server/helps.rb:41 msgid "" "<p><b><big>Aborting Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -844,8 +840,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/samba-server/helps.rb:45 +#. Write dialog help 1/2 +#: src/include/samba-server/helps.rb:45 msgid "" "<p><b><big>Saving Samba Server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -853,8 +849,8 @@ "<p><b><big>Samba 서버의 설정을 저장중입니다</big></b><br>\n" "<br>기다려주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/samba-server/helps.rb:49 +#. Write dialog help 2/2 +#: src/include/samba-server/helps.rb:49 msgid "" "<p><b><big>Aborting Saving</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -866,62 +862,51 @@ " 대화 상자가 추가로 나타나서 지금 중단하는 것이 안전한지 알려줍니다.\n" " </p>\n" -#. Samba selecting workgroup or domain 1/1 - Installation step 1 -#: src/include/samba-server/helps.rb:56 +#. Samba selecting workgroup or domain 1/1 - Installation step 1 +#: src/include/samba-server/helps.rb:56 msgid "" "<p><b><big>Workgroup or Domain Selection</big></b><br>\n" -"Select existing name of workgroup or domain or type your own new name and " -"click <b>Next</b>.\n" +"Select existing name of workgroup or domain or type your own new name and click <b>Next</b>.\n" "</p>\n" msgstr "" "<p><b><big>작업 그룹 또는 도메인 선택</big></b><br>\n" -"기존 작업 그룹 또는 도메인의 이름을 선택하거나 고유한 새 이름을 입력하고 <b>" -"다음</b>을 클릭하십시오.\n" +"기존 작업 그룹 또는 도메인의 이름을 선택하거나 고유한 새 이름을 입력하고 <b>다음</b>을 클릭하십시오.\n" "</p>\n" -#. Samba select Samba Server type - Installation step 2 -#: src/include/samba-server/helps.rb:62 +#. Samba select Samba Server type - Installation step 2 +#: src/include/samba-server/helps.rb:62 msgid "" "<p><b><big>Samba Server Type</big></b></p>\n" -"<p>A domain controller allows Windows clients to log in to a Windows NT " -"style domain.</p>\n" +"<p>A domain controller allows Windows clients to log in to a Windows NT style domain.</p>\n" "<p>The backup controller uses another domain controller for validation.\n" -"The primary controller uses its own information about users and their " -"passwords.</p>\n" -"<p>The options available in the configuration dialogs depend on the settings " -"in this selection. Windows NT style domain controller functionality will be " -"phased out in future releases.</p>" +"The primary controller uses its own information about users and their passwords.</p>\n" +"<p>The options available in the configuration dialogs depend on the settings in this selection. Windows NT style domain controller functionality will be phased out in future releases.</p>" msgstr "" "<p><b><big>Samba 서버 형식</big></b></p>\n" -"<p>Windows 클라이언트는 도메인 컨트롤러를 통해 Windows NT 스타일 도메인에 로" -"그인할 수 있습니다.</p>\n" +"<p>Windows 클라이언트는 도메인 컨트롤러를 통해 Windows NT 스타일 도메인에 로그인할 수 있습니다.</p>\n" "<p>백업 컨트롤러는 유효성 검사를 위해 다른 도메인 컨트롤러를 사용합니다.\n" "주 컨트롤러는 사용자와 비밀번호에 대한 자체 정보를 사용합니다.</p>\n" -"<p>여기서 선택하는 설정에 따라 구성 대화 상자에서 사용할 수 있는 옵션이 달라" -"집니다. Windows NT 스타일 도메인 컨트롤러 기능은 이후 릴리스에서 단계적으로 " -"제거될 예정입니다.</p>" +"<p>여기서 선택하는 설정에 따라 구성 대화 상자에서 사용할 수 있는 옵션이 달라집니다. Windows NT 스타일 도메인 컨트롤러 기능은 이후 릴리스에서 단계적으로 제거될 예정입니다.</p>" -#. Samba select Samba Server type - Installation step 2 -#: src/include/samba-server/helps.rb:73 +#. Samba select Samba Server type - Installation step 2 +#: src/include/samba-server/helps.rb:73 msgid "" "<p><b><big>Samba Server Type</big></b></p>\n" -"<p>A domain controller allows Windows clients to log in to a Windows domain." -"</p>\n" +"<p>A domain controller allows Windows clients to log in to a Windows domain.</p>\n" "<p>The options available in the configuration dialogs \n" "depend on the settings in this selection.</p>" msgstr "" "<p><b><big>Samba 서버 형식</big></b></p>\n" -"<p>Windows 클라이언트는 도메인 컨트롤러를 통해 Windows 도메인에 로그인할 수 " -"있습니다.</p>\n" +"<p>Windows 클라이언트는 도메인 컨트롤러를 통해 Windows 도메인에 로그인할 수 있습니다.</p>\n" " <p>여기서 선택하는 설정에 따라 구성 대화 상자에서 \n" " 사용할 수 있는 옵션이 달라집니다.</p>" -#. Share list dialog help 1/4 -#: src/include/samba-server/helps.rb:80 +#. Share list dialog help 1/4 +#: src/include/samba-server/helps.rb:80 msgid "<p><b><big>Shares</big></b></p>" msgstr "<p><b><big>공유</big></b></p>" -#: src/include/samba-server/helps.rb:83 +#: src/include/samba-server/helps.rb:83 msgid "" "<p>This is a list of already configured shares, whether they \n" "are enabled or disabled, and some basic information about them.<br></p>" @@ -929,8 +914,8 @@ "<p>이 목록에는 이미 구성된 공유(활성 및 비활성 공유 모두 포함)\n" "및 각 공유에 대한 기본 정보가 포함되어 있습니다.<br></p>" -#. Share list dialog help 2/4 -#: src/include/samba-server/helps.rb:87 +#. Share list dialog help 2/4 +#: src/include/samba-server/helps.rb:87 msgid "" "<p>A share can be enabled or disabled.\n" "A disabled share is not accessible, but its\n" @@ -944,8 +929,8 @@ " 따라서 나중에 공유를 활성화할 수 있습니다.\n" " </p>" -#. Share list dialog help 3/4 -#: src/include/samba-server/helps.rb:95 +#. Share list dialog help 3/4 +#: src/include/samba-server/helps.rb:95 msgid "" "<p>Some of the shares are special. For example, the share\n" "Homes is a special system share for accessing home directories\n" @@ -959,8 +944,8 @@ " 선택하면 테이블에서 시스템 공유를 숨길 수\n" " 있습니다.</p>\n" -#. Share list dialog help 4/4 -#: src/include/samba-server/helps.rb:103 +#. Share list dialog help 4/4 +#: src/include/samba-server/helps.rb:103 msgid "" "<p>Use <b>Add</b> to add a new share, <b>Edit</b> to modify\n" "already existing share, and <b>Delete</b> to \n" @@ -970,8 +955,8 @@ "<b>편집</b>, 공유에 대한 정보를 제거하려면 \n" " <b>삭제</b>를 사용하십시오.</p>\n" -#. Identity dialog help 1/5 -#: src/include/samba-server/helps.rb:109 +#. Identity dialog help 1/5 +#: src/include/samba-server/helps.rb:109 msgid "" "<p><b><big>Identity</big></b><br>\n" "These options allow setup of the identity of the server and its\n" @@ -981,29 +966,25 @@ "이 대화 상자의 옵션을 사용하면 서버 ID와\n" "네트워크 내에서의 서버 기본 역할을 설정할 수 있습니다.</p>\n" -#. Samba role dialog help 2/5 -#: src/include/samba-server/helps.rb:115 +#. Samba role dialog help 2/5 +#: src/include/samba-server/helps.rb:115 msgid "" "<p>The base settings set up the domain and the\n" -"server role. <b>Backup Domain Controller</b> and <b>Primary Domain " -"Controller</b> allow Windows clients to log in to a Windows domain. The " -"backup controller \n" +"server role. <b>Backup Domain Controller</b> and <b>Primary Domain Controller</b> allow Windows clients to log in to a Windows domain. The backup controller \n" "uses another domain controller for validation. The primary controller\n" "uses its own information about users and their passwords.\n" "If the server should not participate as a domain controller, choose the\n" "<b>Not a DC</b> value.</p>\n" msgstr "" "<p>기본 설정은 도메인 및 서버 역할을\n" -"설정합니다. Windows 클라이언트는 <b>백업 도메인 컨트롤러</b> 및 <b>주 도메인 " -"컨트롤러</b>를 통해 Windows 도메인에 로그인할 수 있습니다. 백업 컨트롤러는 유" -"효성 \n" +"설정합니다. Windows 클라이언트는 <b>백업 도메인 컨트롤러</b> 및 <b>주 도메인 컨트롤러</b>를 통해 Windows 도메인에 로그인할 수 있습니다. 백업 컨트롤러는 유효성 \n" " 검사를 위해 다른 도메인 컨트롤러를 사용합니다. 주 컨트롤러는\n" " 사용자와 비밀번호에 대한 자체 정보를 사용합니다.\n" " 서버가 도메인 컨트롤러 역할을 하지 않을 경우 <b>DC 아님</b> 값을\n" " 선택하십시오.</p>\n" -#. Samba role dialog help 2/5 -#: src/include/samba-server/helps.rb:124 +#. Samba role dialog help 2/5 +#: src/include/samba-server/helps.rb:124 msgid "" "<p>The <b>Base Settings</b> set up the domain and the\n" "server role. <b>Primary Domain Controller</b> allows Windows clients\n" @@ -1015,8 +996,8 @@ " 도메인에 로그인할 수 있습니다. 서버가 도메인 컨트롤러 역할을\n" " 하지 않을 경우 <b>DC 아님</b>을 선택하십시오.</p>\n" -#. Samba role dialog help 3/5 -#: src/include/samba-server/helps.rb:131 +#. Samba role dialog help 3/5 +#: src/include/samba-server/helps.rb:131 msgid "" "<p><b>WINS</b> is a network protocol for mapping low-level\n" "network identification of a host (for example, IP address) to\n" @@ -1032,8 +1013,8 @@ " 있습니다. 후자의 경우 <b>원격 WINS 서버</b>를 선택한 다음\n" " WINS 서버의 IP 주소를 입력하십시오.</p>\n" -#. Samba role dialog help 4/5 -#: src/include/samba-server/helps.rb:140 +#. Samba role dialog help 4/5 +#: src/include/samba-server/helps.rb:140 msgid "" "<p>Optionally, set a <b>Server NetBIOS Name</b>. The\n" "NetBIOS name is the name the server uses in the SMB network.</p>" @@ -1041,17 +1022,16 @@ "<p>선택적으로 <b>서버 NetBIOS 이름</b>을 설정할 수 있습니다. NetBIOS\n" "이름은 서버가 SMB 네트워크에서 사용하는 이름입니다.</p>" -#. Samba role dialog help 5/5 -#: src/include/samba-server/helps.rb:144 +#. Samba role dialog help 5/5 +#: src/include/samba-server/helps.rb:144 msgid "" "<p><b>Advanced Settings</b> provides access to \n" -"detailed configuration, user authentication sources, and expert global " -"settings.</p>\n" +"detailed configuration, user authentication sources, and expert global settings.</p>\n" msgstr "" "<p><b>고급 설정</b>에서는 자세한 구성,\n" "사용자 인증 원본 및 고급 전역 설정에 액세스할 수 있습니다.</p>\n" -#: src/include/samba-server/helps.rb:147 +#: src/include/samba-server/helps.rb:147 msgid "" "<p><b><big>Trusted Domains</big></b><br>\n" "NT-style trusted domains represent a possibility to assign\n" @@ -1065,7 +1045,7 @@ " Samba 서버가 액세스를 제공해야 할 도메인 \n" " 목록을 여기에서 생성할 수 있습니다.</p>\n" -#: src/include/samba-server/helps.rb:154 +#: src/include/samba-server/helps.rb:154 msgid "" "<p>To add a new domain into the list, press <b>Add</b>.\n" "Enter the name of the domain to trust\n" @@ -1081,7 +1061,7 @@ " 트러스트 관계가 형성됩니다. 도메인을 삭제하려면\n" " 목록에서 선택하고 <b>삭제</b>를 누르십시오.</p>\n" -#: src/include/samba-server/helps.rb:162 +#: src/include/samba-server/helps.rb:162 msgid "" "<p>For more details about how trusted domains work,\n" "see the Samba HOWTO collection.</p>\n" @@ -1089,8 +1069,8 @@ "<p>트러스트된 도메인의 작동 방식에 대한 자세한 내용은\n" "Samba HOWTO collection을 참조하십시오.</p>\n" -#. Single share editing dialog help 1/2 -#: src/include/samba-server/helps.rb:166 +#. Single share editing dialog help 1/2 +#: src/include/samba-server/helps.rb:166 msgid "" "<p><b><big>Edit a Share</big></b><br>\n" "Here, fine-tune the options of a share.</p>\n" @@ -1098,8 +1078,8 @@ "<p><b><big>공유 편집</big></b><br>\n" "여기서는 공유의 옵션을 상세하게 설정할 수 있습니다.</p>\n" -#. Single share editing dialog help 2/2 -#: src/include/samba-server/helps.rb:170 +#. Single share editing dialog help 2/2 +#: src/include/samba-server/helps.rb:170 msgid "" "<p>Use <b>Add</b> to add a new configuration option, <b>Edit</b> to modify\n" "an existing option, and <b>Delete</b> to delete an option.</p>\n" @@ -1107,8 +1087,8 @@ "<p>새 구성 옵션을 추가하려면 <b>추가</b>, 기존 옵션을 수정하려면\n" " <b>편집</b>, 옵션을 삭제하려면 <b>삭제</b>를 사용하십시오.</p>\n" -#. Global settings editing dialog help 1/2 -#: src/include/samba-server/helps.rb:174 +#. Global settings editing dialog help 1/2 +#: src/include/samba-server/helps.rb:174 msgid "" "<p><b><big>Expert Global Settings Configuration</big></b><br>\n" "Here, fine-tune the global options of the server.</p>\n" @@ -1116,19 +1096,17 @@ "<p><b><big>고급 전역 설정 구성</big></b><br>\n" "여기에서는 서버의 전역 옵션을 세밀하게 조정할 수 있습니다.</p>\n" -#. Global settings editing dialog help 2/2 -#: src/include/samba-server/helps.rb:178 +#. Global settings editing dialog help 2/2 +#: src/include/samba-server/helps.rb:178 msgid "" "<p>Use <b>Add</b> to add a new configuration option, <b>Edit</b> to modify\n" "already existing option, and <b>Delete</b> to delete an option.</p>\n" msgstr "" -"새로운 설정 옵션을 추가하려면 <b>추가</b>를 사용하시고, 이미 존재하는 옵션" -"을\n" -"편집하려면 <b>편집</b>을 사용하십시오. 그리고 옵션을 삭제하려면 <b>삭제</b>" -"를 사용하십시오</p>\n" +"새로운 설정 옵션을 추가하려면 <b>추가</b>를 사용하시고, 이미 존재하는 옵션을\n" +"편집하려면 <b>편집</b>을 사용하십시오. 그리고 옵션을 삭제하려면 <b>삭제</b>를 사용하십시오</p>\n" -#. Advanced SAMBA configuration dialog help 1/3 -#: src/include/samba-server/helps.rb:182 +#. Advanced SAMBA configuration dialog help 1/3 +#: src/include/samba-server/helps.rb:182 msgid "" "<p><b><big>LDAP Samba Server Options</big></b><br>\n" "Here, set up details about use of LDAP by the Samba\n" @@ -1138,12 +1116,11 @@ "여기서는 Samba 서버의 LDAP 사용에 대한 내용을\n" " 상세하게 설정할 수 있습니다.</p>\n" -#. Advanced SAMBA configuration dialog help 2/3 -#: src/include/samba-server/helps.rb:188 +#. Advanced SAMBA configuration dialog help 2/3 +#: src/include/samba-server/helps.rb:188 msgid "" "<p><b>Search Base DN</b> (distinguished name) is\n" -"the base at which to start searching the information. <b>Administration DN is used when\n" +"the base at which to start searching the information. <b>Administration DN</b> is used when\n" "creating new users and groups. If the administration DN requires\n" "a password for write access, set the password using\n" "<b>Set LDAP Administration Password</b>.</p>\n" @@ -1154,16 +1131,13 @@ " 필요한 경우에는 <b>LDAP 관리자 비밀번호 설정</b>을\n" " 사용하여 비밀번호를 설정하십시오.</p>\n" -#. Advanced SAMBA configuration dialog help 3/3 -#: src/include/samba-server/helps.rb:196 -msgid "" -"<p><b>Note:</b> Settings are saved before the LDAP administration password " -"is set.</p>\n" -msgstr "" -"<p><b>주의:</b> LDAP 관리 비밀번호가 설정되기 전에 설정이 저장됩니다.</p>\n" +#. Advanced SAMBA configuration dialog help 3/3 +#: src/include/samba-server/helps.rb:196 +msgid "<p><b>Note:</b> Settings are saved before the LDAP administration password is set.</p>\n" +msgstr "<p><b>주의:</b> LDAP 관리 비밀번호가 설정되기 전에 설정이 저장됩니다.</p>\n" -#. passdb backend configuration dialog help 1 -#: src/include/samba-server/helps.rb:200 +#. passdb backend configuration dialog help 1 +#: src/include/samba-server/helps.rb:200 msgid "" "<p><b><big>User Authentication Information Backends</big></b><br>\n" "Choose where the Samba server should look for the authentication\n" @@ -1175,19 +1149,17 @@ "선택하십시오. Samba는 더 이상 여러 백 엔드를 동시에 지원하지 않습니다.\n" "하나만 허용됩니다.</p>\n" -#. passdb backend configuration dialog help 2 -#: src/include/samba-server/helps.rb:207 +#. passdb backend configuration dialog help 2 +#: src/include/samba-server/helps.rb:207 msgid "" -"<p>If you want to change the user authentication source, remove the current " -"one first\n" +"<p>If you want to change the user authentication source, remove the current one first\n" "by pressing <b>Delete</b> and add a new one with <b>Add</b>.</p>\n" msgstr "" "<p>사용자 인증 소스를 변경하려면 먼저\n" -"<b>삭제</b>를 눌러 현재 소스를 제거한 후 <b>추가</b>를 눌러 새 소스를 추가하" -"십시오.</p>\n" +"<b>삭제</b>를 눌러 현재 소스를 제거한 후 <b>추가</b>를 눌러 새 소스를 추가하십시오.</p>\n" -#. passdb backend configuration dialog help 3 -#: src/include/samba-server/helps.rb:211 +#. passdb backend configuration dialog help 3 +#: src/include/samba-server/helps.rb:211 msgid "" "<p><b>smbpasswd file</b> is the file using the same format as\n" "the previous versions of Samba. Its layout is similar to the\n" @@ -1199,8 +1171,8 @@ "passwd 파일의 레이아웃과 유사합니다. 이 형식의 파일을 여러 개\n" "사용할 수 있습니다.</p>\n" -#. passdb backend configuration dialog help 4 -#: src/include/samba-server/helps.rb:218 +#. passdb backend configuration dialog help 4 +#: src/include/samba-server/helps.rb:218 msgid "" "<p><b>LDAP</b> is a URL of an LDAP server to check for\n" "the information.</p>\n" @@ -1208,8 +1180,8 @@ "<p><b>LDAP</b>는 정보를 검색할 LDAP 서버의\n" "URL입니다.</p>\n" -#. passdb backend configuration dialog help 5 -#: src/include/samba-server/helps.rb:222 +#. passdb backend configuration dialog help 5 +#: src/include/samba-server/helps.rb:222 msgid "" "<p><b>TDB database</b> uses an internal Samba database binary format\n" "to store and look up the information.</p>\n" @@ -1217,27 +1189,27 @@ "<p><b>TDB 데이터베이스</b>에서는 내부 Samba 데이터베이스 이진\n" "형식을 사용하여 정보를 저장하고 조회합니다.</p>\n" -#. we don't seem to support mysql anymore -#. /* passdb backend configuration dialog help 5/7 */ -#. _("<p><b>MySQL database</b> uses an external MySQL database to -#. to store and look up the information.</p> -#. ") + -#. not in UI anymore -#. passdb backend configuration dialog help 6/7 -#. _("<p>Use <b>Add</b> to add a new configuration option, <b>Edit</b> to modify -#. an existing option, and <b>Delete</b> to delete an option. -#. Use <b>Up</b> and <b>Down</b> to change the order -#. of the back-ends.</p> -#. "), -#. no such button there -#. /* passdb backend configuration dialog help 7/7 */ -#. _("<p>The <b>LDAP</b> button gives access to -#. details of an LDAP configuration and also allows -#. checking a connection to an LDAP server for the currently -#. selected LDAP back-end.</p> -#. "), -#. add new share dialog help 1/3 -#: src/include/samba-server/helps.rb:248 +#. we don't seem to support mysql anymore +#. /* passdb backend configuration dialog help 5/7 */ +#. _("<p><b>MySQL database</b> uses an external MySQL database to +#. to store and look up the information.</p> +#. ") + +#. not in UI anymore +#. passdb backend configuration dialog help 6/7 +#. _("<p>Use <b>Add</b> to add a new configuration option, <b>Edit</b> to modify +#. an existing option, and <b>Delete</b> to delete an option. +#. Use <b>Up</b> and <b>Down</b> to change the order +#. of the back-ends.</p> +#. "), +#. no such button there +#. /* passdb backend configuration dialog help 7/7 */ +#. _("<p>The <b>LDAP</b> button gives access to +#. details of an LDAP configuration and also allows +#. checking a connection to an LDAP server for the currently +#. selected LDAP back-end.</p> +#. "), +#. add new share dialog help 1/3 +#: src/include/samba-server/helps.rb:248 msgid "" "<p><b><big>Add a New Share</big></b><br>\n" "Here, enter the basic information about a share to add.</p>\n" @@ -1245,8 +1217,8 @@ "<p><b><big>새로운 사용자 추가</big></b><br>\n" "여기에서는 추가할 공유에 대한 기본 정보를 입력합니다.</p>\n" -#. add new share dialog help 2/3 -#: src/include/samba-server/helps.rb:252 +#. add new share dialog help 2/3 +#: src/include/samba-server/helps.rb:252 msgid "" "<p><b>Share Name</b> is used for accessing\n" "the share from clients. <b>Share Description</b> describes the\n" @@ -1256,8 +1228,8 @@ "액세스하는 데 사용되며, <b>공유 설명</b>은 해당\n" "공유의 용도를 설명합니다.</p>" -#. add new share dialog help 3/3 -#: src/include/samba-server/helps.rb:258 +#. add new share dialog help 3/3 +#: src/include/samba-server/helps.rb:258 msgid "" "<p>There are two types of shares. A <b>Printer</b> share\n" "is presented as a printer to clients. A <b>Directory</b> share \n" @@ -1269,8 +1241,8 @@ "네트워크 디스크로 표시됩니다. 공유 디렉토리에 대해서는\n" "<b>공유 경로</b>를 반드시 입력해야 합니다.</p>\n" -#. add new share dialog help 4/3 -#: src/include/samba-server/helps.rb:265 +#. add new share dialog help 4/3 +#: src/include/samba-server/helps.rb:265 msgid "" "<p>If <b>Read-Only</b> is checked, users\n" "of a service may not create or modify files in the service's\n" @@ -1280,7 +1252,7 @@ "서비스 디렉토리에서 파일을 만들거나 수정할 수\n" " 없습니다.</p>\n" -#: src/include/samba-server/helps.rb:270 +#: src/include/samba-server/helps.rb:270 msgid "" "<p><b>Inherit ACLS</b> can be used to ensure\n" "that if default ACLs exist on parent directories, they are always\n" @@ -1290,123 +1262,72 @@ "만들 때 이러한 ACL이 항상 상속되도록 하려면 <b>ACL 상속</b>을\n" " 사용할 수 있습니다.</p>\n" -#. add new share dialog help -#: src/include/samba-server/helps.rb:276 -msgid "" -"<p>With <b>Expose Snapshots</b> selected, Samba exposes snapshots created by " -"Snapper for access and manipulation by CIFS/SMB clients. This option is only " -"available if Samba offers Snapper support, and the Share Path corresponds to " -"a Btrfs backed Snapper configuration subvolume.<br> Relevant permissions " -"must also be granted, see Samba's <b>vfs_snapper(8)</b> man page for further " -"details.</p>" -msgstr "" -"<p><b>스냅샷 노출</b>이 선택된 경우 Samba는 CIFS/SMB 클라이언트에서 액세스 " -"및 조작하기 위해 스냅퍼에 의해 생성된 스냅샷을 노출합니다. 이 옵션은 Samba에" -"서 스냅퍼 지원을 제공하는 경우에만 사용할 수 있으며, 공유 경로는 Btrfs 백 엔" -"드 스냅퍼 구성 하위 볼륨에 해당합니다.<br> 관련 권한도 부여해야 합니다. 자세" -"한 내용은 Samba <b>vfs_snapper(8)</b> 사용자 지정 페이지를 참조하십시오.</p>" +#. add new share dialog help +#: src/include/samba-server/helps.rb:276 +msgid "<p>With <b>Expose Snapshots</b> selected, Samba exposes snapshots created by Snapper for access and manipulation by CIFS/SMB clients. This option is only available if Samba offers Snapper support, and the Share Path corresponds to a Btrfs backed Snapper configuration subvolume.<br> Relevant permissions must also be granted, see Samba's <b>vfs_snapper(8)</b> man page for further details.</p>" +msgstr "<p><b>스냅샷 노출</b>이 선택된 경우 Samba는 CIFS/SMB 클라이언트에서 액세스 및 조작하기 위해 스냅퍼에 의해 생성된 스냅샷을 노출합니다. 이 옵션은 Samba에서 스냅퍼 지원을 제공하는 경우에만 사용할 수 있으며, 공유 경로는 Btrfs 백 엔드 스냅퍼 구성 하위 볼륨에 해당합니다.<br> 관련 권한도 부여해야 합니다. 자세한 내용은 Samba <b>vfs_snapper(8)</b> 사용자 지정 페이지를 참조하십시오.</p>" -#: src/include/samba-server/helps.rb:283 -msgid "" -"<p><b>Utilize Btrfs Features</b> instructs Samba to take advantage of " -"features specific to the Btrfs filesystem. This option is only available if " -"Samba offers Btrfs support, and the Share Path is a Btrfs subvolume. See " -"Samba's <b>vfs_btrfs(8)</b> man page for further details.</p>" -msgstr "" -"<p><b>Btrfs 기능 활용</b>은 Btrfs 파일 시스템과 관련된 기능을 이용하도록 " -"Samba에 지시합니다. 이 옵션은 Samba에서 Btrfs 지원을 제공하고 공유 경로가 " -"Btrfs 하위 볼륨인 경우에만 사용할 수 있습니다. 자세한 내용은 Samba " -"<b>vfs_snapper(8)</b> 사용자 지정 페이지를 참조하십시오.</p>" +#: src/include/samba-server/helps.rb:283 +msgid "<p><b>Utilize Btrfs Features</b> instructs Samba to take advantage of features specific to the Btrfs filesystem. This option is only available if Samba offers Btrfs support, and the Share Path is a Btrfs subvolume. See Samba's <b>vfs_btrfs(8)</b> man page for further details.</p>" +msgstr "<p><b>Btrfs 기능 활용</b>은 Btrfs 파일 시스템과 관련된 기능을 이용하도록 Samba에 지시합니다. 이 옵션은 Samba에서 Btrfs 지원을 제공하고 공유 경로가 Btrfs 하위 볼륨인 경우에만 사용할 수 있습니다. 자세한 내용은 Samba <b>vfs_snapper(8)</b> 사용자 지정 페이지를 참조하십시오.</p>" -#. help for LDAP Settings dialog -#: src/include/samba-server/helps.rb:289 +#. help for LDAP Settings dialog +#: src/include/samba-server/helps.rb:289 msgid "" "<p><b><big>LDAP Settings</big></b><br>\n" "Here, determine the LDAP server to use for authentication.\n" "</p>\n" "<p>\n" -"Setting <b>LDAP Password Back-End</b> allows storing user information in the " -"LDAP tree specified by the URL. With <b>LDAP Idmap Back-End</b>, store SID/" -"uid/gid mapping tables in LDAP.\n" +"Setting <b>LDAP Password Back-End</b> allows storing user information in the LDAP tree specified by the URL. With <b>LDAP Idmap Back-End</b>, store SID/uid/gid mapping tables in LDAP.\n" "</p><p>\n" -"In the Authentication section, set the credentials for the LDAP server, " -"including full Administrator DN.\n" +"In the Authentication section, set the credentials for the LDAP server, including full Administrator DN.\n" "</p>\n" -"<b>Search Base DN</b> is the LDAP suffix appended to Samba-specific LDAP " -"objects.\n" +"<b>Search Base DN</b> is the LDAP suffix appended to Samba-specific LDAP objects.\n" "</p><p>\n" -"To test the connection to your LDAP server, click <b>Test Connection</b>. To " -"set expert LDAP settings or use default values, click <b>Advanced Settings.<p>" +"To test the connection to your LDAP server, click <b>Test Connection</b>. To set expert LDAP settings or use default values, click <b>Advanced Settings</b>.<p>" msgstr "" "<p><b><big>LDAP 설정</big></b><br>\n" "여기서는 인증에 사용할 LDAP 서버를 결정합니다.\n" "</p>\n" "<p>\n" -"<b>LDAP 비밀번호 백 엔드</b>를 설정하면 URL로 지정된 LDAP 트리에 사용자 정보" -"를 저장할 수 있습니다. <b>LDAP Idmap 백 엔드</b>를 사용하는 경우 SID/uid/gid " -"매핑 테이블을 LDAP에 저장하십시오.\n" +"<b>LDAP 비밀번호 백 엔드</b>를 설정하면 URL로 지정된 LDAP 트리에 사용자 정보를 저장할 수 있습니다. <b>LDAP Idmap 백 엔드</b>를 사용하는 경우 SID/uid/gid 매핑 테이블을 LDAP에 저장하십시오.\n" "</p><p>\n" -"[인증] 섹션에서 전체 관리자 DN을 포함하여 LDAP 서버에 대한 자격 증명을 설정하" -"십시오.\n" +"[인증] 섹션에서 전체 관리자 DN을 포함하여 LDAP 서버에 대한 자격 증명을 설정하십시오.\n" "</p>\n" "<b>검색 기준 DN</b>은 Samba 특정 LDAP 객체에 추가되는 LDAP 접미사입니다.\n" "</p><p>\n" -"LDAP 서버에 대한 연결을 테스트하려면 <b>연결 테스트</b>를 클릭하십시오. 고급 " -"LDAP 설정을 지정하거나 기본값을 사용하려면 <b>고급 설정</b>을 클릭하십시오." -"<p>" +"LDAP 서버에 대한 연결을 테스트하려면 <b>연결 테스트</b>를 클릭하십시오. 고급 LDAP 설정을 지정하거나 기본값을 사용하려면 <b>고급 설정</b>을 클릭하십시오.<p>" -#. help for SambaLDAPSettingsSuffixesWidget -#: src/include/samba-server/helps.rb:303 -msgid "" -"<p><b>User Suffix</b> specifies where users are added to the LDAP tree. The " -"value is pre-pended to the value of <b>Search Base DN</b>. Similarly, " -"<b>Group Suffix</b> specifies the place for groups, <b>Machine Suffix</b> " -"for machines and <b>Idmap Suffix</b> for idmap mappings.</p>" -msgstr "" -"<p><b>사용자 접미사</b>는 사용자가 LDAP 트리에 추가되는 위치를 지정합니다. " -"이 값은 <b>검색 기준 DN</b> 값의 앞에 추가됩니다. 마찬가지로, <b>그룹 접미사" -"</b>는 그룹의 위치, 컴퓨터의 <b>컴퓨터 접미사</b> 및 Idmap 설정의 <b>Idmap 접" -"미사</b>를 지정합니다.</p>" +#. help for SambaLDAPSettingsSuffixesWidget +#: src/include/samba-server/helps.rb:303 +msgid "<p><b>User Suffix</b> specifies where users are added to the LDAP tree. The value is pre-pended to the value of <b>Search Base DN</b>. Similarly, <b>Group Suffix</b> specifies the place for groups, <b>Machine Suffix</b> for machines and <b>Idmap Suffix</b> for idmap mappings.</p>" +msgstr "<p><b>사용자 접미사</b>는 사용자가 LDAP 트리에 추가되는 위치를 지정합니다. 이 값은 <b>검색 기준 DN</b> 값의 앞에 추가됩니다. 마찬가지로, <b>그룹 접미사</b>는 그룹의 위치, 컴퓨터의 <b>컴퓨터 접미사</b> 및 Idmap 설정의 <b>Idmap 접미사</b>를 지정합니다.</p>" -#. help for SambaLDAPSettingsTimeoutsWidget -#: src/include/samba-server/helps.rb:307 +#. help for SambaLDAPSettingsTimeoutsWidget +#: src/include/samba-server/helps.rb:307 msgid "" -"<p><b>Replication Sleep</b> is the amount of milliseconds Samba will wait " -"after writing to the LDAP server, so LDAP replicas can catch up.</p>\n" -"<p><b>Time-Out</b> specifies the timeout for LDAP operations (in seconds)." +"<p><b>Replication Sleep</b> is the amount of milliseconds Samba will wait after writing to the LDAP server, so LDAP replicas can catch up.</p>\n" +"<p><b>Time-Out</b> specifies the timeout for LDAP operations (in seconds).</p>" msgstr "" -"<p><b>복제 중지</b>는 LDAP 복제본에 반영될 수 있도록 Samba에서 LDAP 서버에 " -"쓴 후 기다릴 시간(밀리초)입니다.</p>\n" +"<p><b>복제 중지</b>는 LDAP 복제본에 반영될 수 있도록 Samba에서 LDAP 서버에 쓴 후 기다릴 시간(밀리초)입니다.</p>\n" "<p><b>제한 시간</b>은 LDAP 작업의 제한 시간(초)을 지정합니다.</p>" -#. help for SambaLDAPSettingsSecurityWidget -#: src/include/samba-server/helps.rb:311 -msgid "" -"<p>Define whether to use SSL for LDAP connection with <b>Use SSL or TLS</b>." -"</p>" -msgstr "" -"<p><b>SSL 또는 TLS 사용</b>을 통해 LDAP 연결에 SSL을 사용할지 여부를 정의하십" -"시오.</p>" +#. help for SambaLDAPSettingsSecurityWidget +#: src/include/samba-server/helps.rb:311 +msgid "<p>Define whether to use SSL for LDAP connection with <b>Use SSL or TLS</b>.</p>" +msgstr "<p><b>SSL 또는 TLS 사용</b>을 통해 LDAP 연결에 SSL을 사용할지 여부를 정의하십시오.</p>" -#. help for SambaLDAPSettingsMiscWidget -#: src/include/samba-server/helps.rb:315 +#. help for SambaLDAPSettingsMiscWidget +#: src/include/samba-server/helps.rb:315 msgid "" -"<p><b>Delete DN</b> specifies if the delete operation deletes the complete " -"LDAP entry or only the Samba-specific attributes.</p>\n" -"<p>With <b>Synchronize Passwords</b>, define possible synchronization of the " -"LDAP password with the NT and LM hashes. See the <tt>smb.conf</tt> manual " -"page for details.</p>" +"<p><b>Delete DN</b> specifies if the delete operation deletes the complete LDAP entry or only the Samba-specific attributes.</p>\n" +"<p>With <b>Synchronize Passwords</b>, define possible synchronization of the LDAP password with the NT and LM hashes. See the <tt>smb.conf</tt> manual page for details.</p>" msgstr "" -"<p><b>DN 삭제</b>는 삭제 작업에서 전체 LDAP 항목을 삭제할지 또는 Samba 특정 " -"특성만 삭제할지 지정합니다.</p>\n" -"<p><b>비밀번호 동기화</b>를 사용하여 NT 및 LM 해시로 LDAP 비밀번호의 가능한 " -"동기화를 정의하십시오. 자세한 내용은 <tt>smb.conf</tt> 매뉴얼 페이지를 참조하" -"십시오.</p>" +"<p><b>DN 삭제</b>는 삭제 작업에서 전체 LDAP 항목을 삭제할지 또는 Samba 특정 특성만 삭제할지 지정합니다.</p>\n" +"<p><b>비밀번호 동기화</b>를 사용하여 NT 및 LM 해시로 LDAP 비밀번호의 가능한 동기화를 정의하십시오. 자세한 내용은 <tt>smb.conf</tt> 매뉴얼 페이지를 참조하십시오.</p>" -#. translators: warning text -#: src/include/samba-server/helps.rb:322 +#. translators: warning text +#: src/include/samba-server/helps.rb:322 msgid "" "If you change the NetBIOS Hostname, Samba creates a\n" "service identifier (SID) for your server with the first client\n" @@ -1418,8 +1339,8 @@ " 생성합니다. 새 SID는 이전 것과 다르기 때문에 클라이언트는\n" " 더 이상 도메인 구성원으로 인증되지 않습니다.\n" -#. translators: warning text -#: src/include/samba-server/helps.rb:329 +#. translators: warning text +#: src/include/samba-server/helps.rb:329 msgid "" "Consider that /tmp and /var/tmp are publicly accessible\n" "directories and a scheduled clean job might remove files after a\n" @@ -1431,8 +1352,8 @@ " 유의하십시오. /etc/sysconfig/cron의 MAX_DAYS_IN_TMP 및 TMP_DIRS_TO_CLEAR를\n" " 참조하십시오.\n" -#. translators: warning text -#: src/include/samba-server/helps.rb:336 +#. translators: warning text +#: src/include/samba-server/helps.rb:336 msgid "" "Exporting /var might lead to security problems. The\n" "directory includes many secrets of your system.\n" @@ -1440,8 +1361,8 @@ "/var를 엑스포트하면 보안 문제가 발생할 수 있습니다. 이\n" "디렉토리에는 다량의 시스템 기밀 정보가 들어 있습니다.\n" -#. translators: warning text -#: src/include/samba-server/helps.rb:340 +#. translators: warning text +#: src/include/samba-server/helps.rb:340 msgid "" "Exporting /etc might lead to security problems. The\n" "directory includes many secrets of your system.\n" @@ -1449,8 +1370,8 @@ "/etc를 엑스포트하면 보안 문제가 발생할 수 있습니다. 이\n" "디렉토리에는 다량의 시스템 기밀 정보가 들어 있습니다.\n" -#. translators: warning text -#: src/include/samba-server/helps.rb:346 +#. translators: warning text +#: src/include/samba-server/helps.rb:346 msgid "" "Exporting / might lead to security problems because it makes your\n" "entire file system browsable from Samba clients.\n" @@ -1458,47 +1379,46 @@ "/를 엑스포트하면 Samba 클라이언트에서 파일 시스템 전체를\n" "볼 수 있으므로 보안 문제가 발생할 수 있습니다.\n" -#: src/include/samba-server/helps.rb:350 +#: src/include/samba-server/helps.rb:350 msgid "" "<p><b>Advanced Settings</b> provides access to \n" -"detailed configuration, such as LDAP settings, user authentication sources, " -"and\n" +"detailed configuration, such as LDAP settings, user authentication sources, and\n" "expert global settings.</p>\n" msgstr "" "<p><b>고급 설정</b>에서는 LDAP 설정, 사용자 \n" "인증 원본 및 고급 전역 설정과 같은 세부 사항을\n" " 구성할 수 있습니다.</p>\n" -#. translators: combo box value -#: src/include/samba-server/ldap-widget.rb:67 +#. translators: combo box value +#: src/include/samba-server/ldap-widget.rb:67 msgid "TLS" msgstr "TLS" -#. translators: combo box value (updata password? Yes/No/Only = Only update the LDAP password and let the LDAP server do the rest) -#: src/include/samba-server/ldap-widget.rb:82 +#. translators: combo box value (updata password? Yes/No/Only = Only update the LDAP password and let the LDAP server do the rest) +#: src/include/samba-server/ldap-widget.rb:82 msgid "Only" msgstr "조건 수행" -#. translators: popup warning message about empty text entry -#: src/include/samba-server/ldap-widget.rb:166 +#. translators: popup warning message about empty text entry +#: src/include/samba-server/ldap-widget.rb:166 msgid "Enter the server URL." msgstr "서버 URL을 입력하십시오." -#. translators: inform text -#: src/include/samba-server/ldap-widget.rb:181 -#: src/include/samba-server/ldap-widget.rb:289 +#. translators: inform text +#: src/include/samba-server/ldap-widget.rb:181 +#: src/include/samba-server/ldap-widget.rb:289 msgid "Passwords do not match." msgstr "비밀번호가 일치하지 않습니다." -#. translators: inform text -#: src/include/samba-server/ldap-widget.rb:300 +#. translators: inform text +#: src/include/samba-server/ldap-widget.rb:300 msgid "Passwords match." msgstr "비밀번호가 일치합니다." -#. Propose default values -#. translators: popup message -#: src/include/samba-server/ldap-widget.rb:351 -#: src/include/samba-server/ldap-widget.rb:369 +#. Propose default values +#. translators: popup message +#: src/include/samba-server/ldap-widget.rb:351 +#: src/include/samba-server/ldap-widget.rb:369 msgid "" "All current LDAP-related values will be rewritten.\n" "Continue?\n" @@ -1506,182 +1426,182 @@ "LDAP와 관련된 현재의 모든 값이 재작성됩니다.\n" "계속하시겠습니까?\n" -#. translators: popup message -#: src/include/samba-server/ldap-widget.rb:364 +#. translators: popup message +#: src/include/samba-server/ldap-widget.rb:364 msgid "Connection successful." msgstr "성공적으로 연결되었습니다." -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:432 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:432 msgid "&Search Base DN" msgstr "검색 기준 DN(&H)" -#: src/include/samba-server/ldap-widget.rb:435 +#: src/include/samba-server/ldap-widget.rb:435 msgid "Authentication" msgstr "인증" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:438 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:438 msgid "&Administration DN" msgstr "관리 DN(&A)" -#. TODO: if Mode::config() => no ask for pssword -#. translators: password enrty label -#: src/include/samba-server/ldap-widget.rb:447 +#. TODO: if Mode::config() => no ask for pssword +#. translators: password enrty label +#: src/include/samba-server/ldap-widget.rb:447 msgid "Administration &Password" msgstr "관리 비밀번호(&P)" -#. translators: reenter password entry label -#: src/include/samba-server/ldap-widget.rb:453 +#. translators: reenter password entry label +#: src/include/samba-server/ldap-widget.rb:453 msgid "Administration Password (A&gain)" msgstr "관리 비밀번호(다시 입력)(&G)" -#. translators: frame title (passdb == password database) -#: src/include/samba-server/ldap-widget.rb:464 +#. translators: frame title (passdb == password database) +#: src/include/samba-server/ldap-widget.rb:464 msgid "Passdb Back-End" msgstr "Passdb 백 엔드" -#. translators: check box label -#: src/include/samba-server/ldap-widget.rb:471 +#. translators: check box label +#: src/include/samba-server/ldap-widget.rb:471 msgid "Use LDAP Password &Back-End" msgstr "LDAP 비밀번호 백 엔드 사용(&B)" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:475 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:475 msgid "LDAP Server &URL" msgstr "LDAP 서버 URL(&E)" -#. translators: frame title (idmap = user id mapping) -#: src/include/samba-server/ldap-widget.rb:483 +#. translators: frame title (idmap = user id mapping) +#: src/include/samba-server/ldap-widget.rb:483 msgid "Idmap Back-End" msgstr "Idmap 백 엔드" -#. translators: check box label -#: src/include/samba-server/ldap-widget.rb:490 +#. translators: check box label +#: src/include/samba-server/ldap-widget.rb:490 msgid "Use LDAP &Idmap Back-End" msgstr "LDAP Idmap 백 엔드 사용(&I)" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:494 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:494 msgid "LDAP Server U&RL" msgstr "LDAP 서버 URL(&R)" -#: src/include/samba-server/ldap-widget.rb:517 +#: src/include/samba-server/ldap-widget.rb:517 msgid "&Test Connection" msgstr "연결 테스트(&T)" -#: src/include/samba-server/ldap-widget.rb:520 +#: src/include/samba-server/ldap-widget.rb:520 msgid "Advanced &Settings..." msgstr "고급 설정(&S)..." -#. translators: dialog caption -#: src/include/samba-server/ldap-widget.rb:522 -#: src/include/samba-server/ldap-widget.rb:820 +#. translators: dialog caption +#: src/include/samba-server/ldap-widget.rb:522 +#: src/include/samba-server/ldap-widget.rb:820 msgid "Expert LDAP Settings" msgstr "고급 LDAP 설정" -#: src/include/samba-server/ldap-widget.rb:523 +#: src/include/samba-server/ldap-widget.rb:523 msgid "Default Values" msgstr "기본값" -#. translators: frame label -#: src/include/samba-server/ldap-widget.rb:587 +#. translators: frame label +#: src/include/samba-server/ldap-widget.rb:587 msgid "Suffixes" msgstr "접미사" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:590 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:590 msgid "&User Suffix" msgstr "사용자 접미사(&U)" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:592 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:592 msgid "&Group Suffix" msgstr "그룹 접미사(&G)" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:594 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:594 msgid "&Machine Suffix" msgstr "컴퓨터 접미사(&M)" -#. translators: text entry label -#: src/include/samba-server/ldap-widget.rb:596 +#. translators: text entry label +#: src/include/samba-server/ldap-widget.rb:596 msgid "&Idmap Suffix" msgstr "Idmap 접미사(&I)" -#. translators: frame label -#: src/include/samba-server/ldap-widget.rb:641 +#. translators: frame label +#: src/include/samba-server/ldap-widget.rb:641 msgid "Time-Outs" msgstr "시간 초과" -#. translators: integer field label -#: src/include/samba-server/ldap-widget.rb:647 +#. translators: integer field label +#: src/include/samba-server/ldap-widget.rb:647 msgid "&Replication Sleep" msgstr "복제 중지(&R)" -#. translators: integer field label -#: src/include/samba-server/ldap-widget.rb:654 +#. translators: integer field label +#: src/include/samba-server/ldap-widget.rb:654 msgid "&Time-Out" msgstr "시간 초과(&T)" -#. translators: frame label -#: src/include/samba-server/ldap-widget.rb:693 +#. translators: frame label +#: src/include/samba-server/ldap-widget.rb:693 msgid "Security" msgstr "보안" -#. translators: combo box label -#: src/include/samba-server/ldap-widget.rb:699 +#. translators: combo box label +#: src/include/samba-server/ldap-widget.rb:699 msgid "&Use SSL or TLS" msgstr "SSL 또는 TLS 사용(&U)" -#. translators: frame label -#: src/include/samba-server/ldap-widget.rb:747 +#. translators: frame label +#: src/include/samba-server/ldap-widget.rb:747 msgid "Other Settings" msgstr "기타 설정" -#. No such option, bug 169194 -#. translators: text entry label -#. `Left(`TextEntry(`id("ldap filter"), _("Search &Filter"))), -#. translators: combo box label -#: src/include/samba-server/ldap-widget.rb:757 +#. No such option, bug 169194 +#. translators: text entry label +#. `Left(`TextEntry(`id("ldap filter"), _("Search &Filter"))), +#. translators: combo box label +#: src/include/samba-server/ldap-widget.rb:757 msgid "&Delete DN" msgstr "DN 삭제(&D)" -#. translators: combo box label -#: src/include/samba-server/ldap-widget.rb:767 +#. translators: combo box label +#: src/include/samba-server/ldap-widget.rb:767 msgid "&Synchronize Passwords" msgstr "암호 동기화(&S)" -#. Initialization dialog caption -#: src/include/samba-server/wizards.rb:167 +#. Initialization dialog caption +#: src/include/samba-server/wizards.rb:167 msgid "Samba Server Configuration" msgstr "Samba 서버 설정" -#. Initialization dialog contents -#: src/include/samba-server/wizards.rb:169 +#. Initialization dialog contents +#: src/include/samba-server/wizards.rb:169 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. translators: in error message, followed by server error -#: src/modules/SambaBackendLDAP.pm:261 +#. translators: in error message, followed by server error +#: src/modules/SambaBackendLDAP.pm:261 msgid "Additional Information:" msgstr "추가 정보:" -#. translators: unknown error message -#: src/modules/SambaBackendLDAP.pm:265 +#. translators: unknown error message +#: src/modules/SambaBackendLDAP.pm:265 msgid "Unknown error. Perhaps yast2-ldap is not available." msgstr "알 수 없는 오류입니다. yast2-ldap를 사용할 수 없는 것 같습니다." -#: src/modules/SambaBackendLDAP.pm:338 +#: src/modules/SambaBackendLDAP.pm:338 msgid "Unknown Class:" msgstr "알 수 없는 클래스:" -#: src/modules/SambaBackendLDAP.pm:338 +#: src/modules/SambaBackendLDAP.pm:338 msgid "Only dcObject (dc) and organizationalUnit (ou) classes are supported." msgstr "dcObject(dc) 및 organizationalUnit(ou) 클래스만 지원됩니다." -#. translators: warning message, %s is LDAP server name/IP -#: src/modules/SambaBackendLDAP.pm:624 +#. translators: warning message, %s is LDAP server name/IP +#: src/modules/SambaBackendLDAP.pm:624 #, perl-format msgid "" "It seems that there is no functional\n" @@ -1690,204 +1610,204 @@ "%s에는 작동되는 LDAP 서버가\n" "없는 것 같습니다.\n" -#. translators: server role name -#: src/modules/SambaRole.pm:50 +#. translators: server role name +#: src/modules/SambaRole.pm:50 msgid "File and Printer Sharing" msgstr "파일과 프린터 공유 중" -#. translators: server role name -#: src/modules/SambaRole.pm:52 +#. translators: server role name +#: src/modules/SambaRole.pm:52 msgid "Backup Domain Controller" msgstr "백업 도메인 컨트롤러" -#. translators: server role name -#: src/modules/SambaRole.pm:54 +#. translators: server role name +#: src/modules/SambaRole.pm:54 msgid "Primary Domain Controller" msgstr "프라이머리 도메인 컨트롤러" -#. translators: server role name -#: src/modules/SambaRole.pm:56 +#. translators: server role name +#: src/modules/SambaRole.pm:56 msgid "Domain Member Server" msgstr "도메인 구성원 서버" -#. Samba-server read dialog caption -#: src/modules/SambaServer.pm:138 +#. Samba-server read dialog caption +#: src/modules/SambaServer.pm:138 msgid "Initializing Samba Server Configuration" msgstr "Samba 서버 설정 초기화 중" -#. translators: progress stage -#: src/modules/SambaServer.pm:143 +#. translators: progress stage +#: src/modules/SambaServer.pm:143 msgid "Read global Samba settings" msgstr "전체적인 삼바 설정 읽기" -#. translators: progress stage -#: src/modules/SambaServer.pm:145 +#. translators: progress stage +#: src/modules/SambaServer.pm:145 msgid "Read Samba secrets" msgstr "삼바 기밀 정보 읽기" -#. translators: progress stage -#: src/modules/SambaServer.pm:147 +#. translators: progress stage +#: src/modules/SambaServer.pm:147 msgid "Read Samba service settings" msgstr "삼바 서비스 설정 읽기" -#. translators: progress stage -#: src/modules/SambaServer.pm:149 +#. translators: progress stage +#: src/modules/SambaServer.pm:149 msgid "Read Samba accounts" msgstr "삼바 계정 읽기" -#. translators: progress stage -#: src/modules/SambaServer.pm:151 +#. translators: progress stage +#: src/modules/SambaServer.pm:151 msgid "Read the back-end settings" msgstr "백 엔드 설정 읽기" -#. translators: progress stage -#: src/modules/SambaServer.pm:153 +#. translators: progress stage +#: src/modules/SambaServer.pm:153 msgid "Read the firewall settings" msgstr "방화벽 설정 읽기" -#. translators: progress stage -#: src/modules/SambaServer.pm:155 +#. translators: progress stage +#: src/modules/SambaServer.pm:155 msgid "Read Samba service role settings" msgstr "Samba 서비스 역할 설정 읽기" -#. translators: progress step -#: src/modules/SambaServer.pm:158 +#. translators: progress step +#: src/modules/SambaServer.pm:158 msgid "Reading global Samba settings..." msgstr "전체적인 삼바 설정을 읽는 중..." -#. translators: progress step -#: src/modules/SambaServer.pm:160 +#. translators: progress step +#: src/modules/SambaServer.pm:160 msgid "Reading Samba secrets..." msgstr "삼바 기밀 정보 읽는 중..." -#. translators: progress step -#: src/modules/SambaServer.pm:162 +#. translators: progress step +#: src/modules/SambaServer.pm:162 msgid "Reading Samba service settings..." msgstr "삼바 서비스 설정 읽는 중..." -#. translators: progress step -#: src/modules/SambaServer.pm:164 +#. translators: progress step +#: src/modules/SambaServer.pm:164 msgid "Reading Samba accounts..." msgstr "삼바 계정 읽는 중..." -#. translators: progress step -#: src/modules/SambaServer.pm:166 +#. translators: progress step +#: src/modules/SambaServer.pm:166 msgid "Reading the back-end settings..." msgstr "백 엔드 설정 읽는 중..." -#. translators: progress step -#: src/modules/SambaServer.pm:168 +#. translators: progress step +#: src/modules/SambaServer.pm:168 msgid "Reading the firewall settings..." msgstr "방화벽 설정 읽는 중..." -#. translators: progress stage -#: src/modules/SambaServer.pm:170 +#. translators: progress stage +#: src/modules/SambaServer.pm:170 msgid "Reading Samba service role settings..." msgstr "Samba 서비스 역할 설정을 읽는 중..." -#. translators: progress finished -#. translators: write progress step -#: src/modules/SambaServer.pm:172 src/modules/SambaServer.pm:285 +#. translators: progress finished +#. translators: write progress step +#: src/modules/SambaServer.pm:172 src/modules/SambaServer.pm:285 msgid "Finished" msgstr "완료" -#. Samba-server read dialog caption -#: src/modules/SambaServer.pm:255 +#. Samba-server read dialog caption +#: src/modules/SambaServer.pm:255 msgid "Saving Samba Server Configuration" msgstr "Samba 서버의 설정 저장 중" -#. translators: write progress stage -#: src/modules/SambaServer.pm:260 +#. translators: write progress stage +#: src/modules/SambaServer.pm:260 msgid "Write global settings" msgstr "전역 설정 쓰기" -#. translators: write progress stage -#: src/modules/SambaServer.pm:262 +#. translators: write progress stage +#: src/modules/SambaServer.pm:262 msgid "Disable Samba services" msgstr "삼바 서비스 비활성화" -#. translators: write progress stage -#: src/modules/SambaServer.pm:264 +#. translators: write progress stage +#: src/modules/SambaServer.pm:264 msgid "Enable Samba services" msgstr "삼바 서비스 활성화" -#. translators: write progress stage -#: src/modules/SambaServer.pm:266 +#. translators: write progress stage +#: src/modules/SambaServer.pm:266 msgid "Write back-end settings" msgstr "백 엔드 설정 쓰기" -#. translators: write progress stage -#: src/modules/SambaServer.pm:268 +#. translators: write progress stage +#: src/modules/SambaServer.pm:268 msgid "Write Samba accounts" msgstr "삼바 계정 쓰기" -#. translators: write progress stage -#: src/modules/SambaServer.pm:270 +#. translators: write progress stage +#: src/modules/SambaServer.pm:270 msgid "Save firewall settings" msgstr "방화벽 설정 저장" -#. translators: write progress step -#: src/modules/SambaServer.pm:273 +#. translators: write progress step +#: src/modules/SambaServer.pm:273 msgid "Writing global settings..." msgstr "전역 설정 쓰는 중..." -#. translators: write progress step -#: src/modules/SambaServer.pm:275 +#. translators: write progress step +#: src/modules/SambaServer.pm:275 msgid "Disabling Samba services..." msgstr "삼바 서비스를 비활성화하는 중..." -#. translators: write progress step -#: src/modules/SambaServer.pm:277 +#. translators: write progress step +#: src/modules/SambaServer.pm:277 msgid "Enabling Samba services..." msgstr "삼바 서비스를 활성화하는 중..." -#. translators: write progress step -#: src/modules/SambaServer.pm:279 +#. translators: write progress step +#: src/modules/SambaServer.pm:279 msgid "Writing back-end settings..." msgstr "백 엔드 설정 쓰는 중..." -#. translators: write progress step -#: src/modules/SambaServer.pm:281 +#. translators: write progress step +#: src/modules/SambaServer.pm:281 msgid "Writing Samba accounts..." msgstr "삼바 계정 쓰는 중..." -#. translators: write progress step -#: src/modules/SambaServer.pm:283 +#. translators: write progress step +#: src/modules/SambaServer.pm:283 msgid "Saving firewall settings..." msgstr "방화벽 설정 저장 중..." -#. /etc/samba/smb.conf is filename -#: src/modules/SambaServer.pm:309 +#. /etc/samba/smb.conf is filename +#: src/modules/SambaServer.pm:309 msgid "Cannot write settings to /etc/samba/smb.conf." msgstr "/etc/samba/smb.conf에 설정을 쓸 수 없습니다." -#. summary item: configured workgroup/domain -#: src/modules/SambaServer.pm:406 +#. summary item: configured workgroup/domain +#: src/modules/SambaServer.pm:406 msgid "Global Configuration:" msgstr "전역 구성:" -#: src/modules/SambaServer.pm:408 +#: src/modules/SambaServer.pm:408 #, perl-format msgid "Workgroup or Domain: %s" msgstr "작업 그룹 또는 도메인: %s" -#. summary item: selected role for the samba server -#: src/modules/SambaServer.pm:412 +#. summary item: selected role for the samba server +#: src/modules/SambaServer.pm:412 #, perl-format msgid "Role: %s" msgstr "역할: %s" -#. summary item: status of the samba service -#: src/modules/SambaServer.pm:415 +#. summary item: status of the samba service +#: src/modules/SambaServer.pm:415 msgid "Samba server is disabled" msgstr "Samba 서버가 비활성화되었습니다." -#. summary heading: configured shares -#: src/modules/SambaServer.pm:419 +#. summary heading: configured shares +#: src/modules/SambaServer.pm:419 msgid "Share Configuration:" msgstr "공유 구성:" -#. summary item: no configured shares -#: src/modules/SambaServer.pm:425 +#. summary item: no configured shares +#: src/modules/SambaServer.pm:425 msgid "None" msgstr "없음" Modified: branches/SLE12-SP3/yast/ko/po/samba-users.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/samba-users.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/samba-users.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,81 +14,68 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. helptext -#: src/clients/users_plugin_samba.rb:74 +#. helptext +#: src/clients/users_plugin_samba.rb:74 msgid "<p>Here, edit the setting of the user's samba account.</p>" msgstr "<p>여기에서는 사용자의 Samba 계정 설정을 편집할 수 있습니다.</p>" -#: src/clients/users_plugin_samba.rb:77 +#: src/clients/users_plugin_samba.rb:77 msgid "<p>If do not enter custom values for " msgstr "<p><b>\"홈 드라이브\"</b>, <b>\"홈 경로\"</b>, " -#: src/clients/users_plugin_samba.rb:78 -msgid "" -"<b>Home Drive</b>, <b>Home Path</b>, <b>Profile Path</b>, and <b>Logon " -"Script</b> " -msgstr "" -"<b>홈 드라이브</b>, <b>홈 경로</b>, <b>프로파일 경로</b> 및 <b>로그온 스크립" -"트</b>" +#: src/clients/users_plugin_samba.rb:78 +msgid "<b>Home Drive</b>, <b>Home Path</b>, <b>Profile Path</b>, and <b>Logon Script</b> " +msgstr "<b>홈 드라이브</b>, <b>홈 경로</b>, <b>프로파일 경로</b> 및 <b>로그온 스크립트</b>" -#: src/clients/users_plugin_samba.rb:81 -msgid "" -"the default values as defined in your local Samba Configuration will be used." -"</p>" +#: src/clients/users_plugin_samba.rb:81 +msgid "the default values as defined in your local Samba Configuration will be used.</p>" msgstr "로컬 Samba 구성에 정의되어 있는 기본값이 사용됩니다.</p>" -#: src/clients/users_plugin_samba.rb:96 +#: src/clients/users_plugin_samba.rb:96 msgid "Home Drive" msgstr "홈 드라이브" -#: src/clients/users_plugin_samba.rb:107 -#: src/clients/users_plugin_samba.rb:128 -#: src/clients/users_plugin_samba.rb:149 -#: src/clients/users_plugin_samba.rb:173 +#: src/clients/users_plugin_samba.rb:107 src/clients/users_plugin_samba.rb:128 +#: src/clients/users_plugin_samba.rb:149 src/clients/users_plugin_samba.rb:173 msgid "Use Default Values" msgstr "기본값 사용" -#: src/clients/users_plugin_samba.rb:117 +#: src/clients/users_plugin_samba.rb:117 msgid "Home Path" msgstr "홈 경로" -#: src/clients/users_plugin_samba.rb:138 +#: src/clients/users_plugin_samba.rb:138 msgid "Profile Path" msgstr "프로파일 경로" -#. translators: logon is the Windows synonym for login -#: src/clients/users_plugin_samba.rb:162 +#. translators: logon is the Windows synonym for login +#: src/clients/users_plugin_samba.rb:162 msgid "Logon Script" msgstr "로그온 스크립트" -#: src/clients/users_plugin_samba.rb:185 +#: src/clients/users_plugin_samba.rb:185 msgid "Samba Account Disabled" msgstr "Samba 계정이 비활성화됨" -#: src/clients/users_plugin_samba.rb:187 +#: src/clients/users_plugin_samba.rb:187 msgid "No Password Expiration" msgstr "비밀번호 만료 기간 없음" -#. dialog caption -#. dialog caption -#: src/clients/users_plugin_samba.rb:199 -#: src/clients/users_plugin_samba_groups.rb:112 +#. dialog caption +#. dialog caption +#: src/clients/users_plugin_samba.rb:199 +#: src/clients/users_plugin_samba_groups.rb:112 msgid "Edit Samba Attributes" msgstr "Samba 특성 편집" -#. help text -#: src/clients/users_plugin_samba_groups.rb:82 +#. help text +#: src/clients/users_plugin_samba_groups.rb:82 msgid "" -"<p>This plugin can be used to enable an LDAP group to be available for " -"Samba.\n" -"The only setting that you can edit here is the <b>Samba Group Name</b> " -"attribute,\n" -"which is the Name of the Group as it should appear to Samba-Clients. All " -"other\n" -"settings are computed automatically. If you leave the <b>Samba Group Name\n" -"empty, the same name as configured in the Global Settings of this Group " -"will\n" +"<p>This plugin can be used to enable an LDAP group to be available for Samba.\n" +"The only setting that you can edit here is the <b>Samba Group Name</b> attribute,\n" +"which is the Name of the Group as it should appear to Samba-Clients. All other\n" +"settings are computed automatically. If you leave the <b>Samba Group Name</b>\n" +"empty, the same name as configured in the Global Settings of this Group will\n" "be used.</p>\n" msgstr "" "<p>이 플러그를 사용하여 Samba에 LDAP 그룹을 사용하도록 할 수 있습니다.\n" @@ -98,34 +85,33 @@ "비워 두면 이 그룹의 전역 설정에 구성된 이름이\n" "사용됩니다.</p>\n" -#: src/clients/users_plugin_samba_groups.rb:99 +#: src/clients/users_plugin_samba_groups.rb:99 msgid "Samba Group Name" msgstr "Samba 그룹 이름" -#. plugin name -#: src/modules/UsersPluginSamba.pm:85 -#: src/modules/UsersPluginSambaGroups.pm:85 +#. plugin name +#: src/modules/UsersPluginSamba.pm:85 src/modules/UsersPluginSambaGroups.pm:85 msgid "Samba Attributes" msgstr "Samba 특성" -#. summary -#: src/modules/UsersPluginSamba.pm:95 +#. summary +#: src/modules/UsersPluginSamba.pm:95 msgid "Manage samba account parameters" msgstr "Samba 계정 매개 변수 관리" -#: src/modules/UsersPluginSamba.pm:203 +#: src/modules/UsersPluginSamba.pm:203 msgid "Could not update objectClass attribute." msgstr "objectclass 특성을 업데이트할 수 없습니다." -#: src/modules/UsersPluginSamba.pm:252 +#: src/modules/UsersPluginSamba.pm:252 msgid "Could not initialize Samba SID. Disabling plug-in." msgstr "Samba SID를 초기화할 수 없습니다. 플러그인을 비활성화합니다." -#: src/modules/UsersPluginSamba.pm:294 +#: src/modules/UsersPluginSamba.pm:294 msgid "Change the password to create the Samba account" msgstr "Samba 계정을 만들기 위해 비밀번호 변경" -#. summary -#: src/modules/UsersPluginSambaGroups.pm:95 +#. summary +#: src/modules/UsersPluginSambaGroups.pm:95 msgid "Manage Samba attribute of LDAP groups" msgstr "LDAP 그룹의 Samba 속성 관리" Modified: branches/SLE12-SP3/yast/ko/po/scanner.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/scanner.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/scanner.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,219 +14,219 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Text for the command_line_description: -#. (the same as the caption of the matching help text) -#. Whole configuration of scanner but without reading and writing. -#. For use with autoinstallation. -#. @return sequence result -#: src/clients/scanner.rb:51 src/include/scanner/dialogs.rb:110 -#: src/include/scanner/wizards.rb:114 +#. Text for the command_line_description: +#. (the same as the caption of the matching help text) +#. Whole configuration of scanner but without reading and writing. +#. For use with autoinstallation. +#. @return sequence result +#: src/clients/scanner.rb:51 src/include/scanner/dialogs.rb:110 +#: src/include/scanner/wizards.rb:114 msgid "Scanner Configuration" msgstr "스캐너 구성" -#. where scanners and associated drivers are listed: -#: src/include/scanner/dialogs.rb:116 +#. where scanners and associated drivers are listed: +#: src/include/scanner/dialogs.rb:116 msgid "Driver" msgstr "드라이버" -#. Header for a column of the overview table -#. where scanners and associated drivers are listed: -#: src/include/scanner/dialogs.rb:119 +#. Header for a column of the overview table +#. where scanners and associated drivers are listed: +#: src/include/scanner/dialogs.rb:119 msgid "Scanner" msgstr "스캐너" -#. Label of a button to restart autodetection of scanners: -#: src/include/scanner/dialogs.rb:125 +#. Label of a button to restart autodetection of scanners: +#: src/include/scanner/dialogs.rb:125 msgid "&Restart Detection" msgstr "검색 재시작(&R)" -#. Label of a button to test a scanner: -#: src/include/scanner/dialogs.rb:130 +#. Label of a button to test a scanner: +#: src/include/scanner/dialogs.rb:130 msgid "&Test" msgstr "테스트(&T)" -#. Label of a button to run hp-setup. -#. Do not change or translate "hp-setup", it is a program name: -#: src/include/scanner/dialogs.rb:136 +#. Label of a button to run hp-setup. +#. Do not change or translate "hp-setup", it is a program name: +#: src/include/scanner/dialogs.rb:136 msgid "Run &hp-setup" msgstr "hp-setup 실행(&H)" -#. Label of a button to go to the network scanning dialog. -#. Do not confuse "scanning via network" -#. (i.e. use a remote scanner via another host in the network) -#. with "scanning the network" -#. (i.e. scan the network for other hosts or services): -#: src/include/scanner/dialogs.rb:145 +#. Label of a button to go to the network scanning dialog. +#. Do not confuse "scanning via network" +#. (i.e. use a remote scanner via another host in the network) +#. with "scanning the network" +#. (i.e. scan the network for other hosts or services): +#: src/include/scanner/dialogs.rb:145 msgid "Scanning via &Network..." msgstr "네트워크를 통한 스캔(&N)..." -#. edit -#. delete -#. Test if the active backend is the 'net' meta-backend: -#. test -#. select a scanner -#: src/include/scanner/dialogs.rb:209 src/include/scanner/dialogs.rb:334 -#: src/include/scanner/dialogs.rb:417 src/include/scanner/dialogs.rb:456 -#: src/include/scanner/dialogs.rb:532 src/include/scanner/dialogs.rb:753 +#. edit +#. delete +#. Test if the active backend is the 'net' meta-backend: +#. test +#. select a scanner +#: src/include/scanner/dialogs.rb:209 src/include/scanner/dialogs.rb:334 +#: src/include/scanner/dialogs.rb:417 src/include/scanner/dialogs.rb:456 +#: src/include/scanner/dialogs.rb:532 src/include/scanner/dialogs.rb:753 msgid "Nothing Selected" msgstr "아무 것도 선택하지 않았습니다." -#. Body of a Popup::AnyMessage when nothing was selected: -#. Body of a Popup::AnyMessage when nothing was selected: -#. Body of a Popup::AnyMessage when nothing was selected: -#. Body of a Popup::AnyMessage when nothing was selected: -#. Body of a Popup::AnyMessage when nothing was selected: -#. Body of a Popup::AnyMessage when no model was selected: -#: src/include/scanner/dialogs.rb:211 src/include/scanner/dialogs.rb:336 -#: src/include/scanner/dialogs.rb:419 src/include/scanner/dialogs.rb:458 -#: src/include/scanner/dialogs.rb:534 src/include/scanner/dialogs.rb:755 +#. Body of a Popup::AnyMessage when nothing was selected: +#. Body of a Popup::AnyMessage when nothing was selected: +#. Body of a Popup::AnyMessage when nothing was selected: +#. Body of a Popup::AnyMessage when nothing was selected: +#. Body of a Popup::AnyMessage when nothing was selected: +#. Body of a Popup::AnyMessage when no model was selected: +#: src/include/scanner/dialogs.rb:211 src/include/scanner/dialogs.rb:336 +#: src/include/scanner/dialogs.rb:419 src/include/scanner/dialogs.rb:458 +#: src/include/scanner/dialogs.rb:534 src/include/scanner/dialogs.rb:755 msgid "Select an entry." msgstr "항목을 선택하십시오." -#. without a matching active scanner was selected -#. and then the user clicked the [Edit] button. -#. Translate 'Edit' to the exact label of the [Edit] button. -#. when there is neither a detected scanner nor an active scanner or driver -#. and then the user clicked the [Edit] button. -#. Translate 'Edit' to the exact label of the [Edit] button. -#: src/include/scanner/dialogs.rb:284 src/include/scanner/dialogs.rb:300 +#. without a matching active scanner was selected +#. and then the user clicked the [Edit] button. +#. Translate 'Edit' to the exact label of the [Edit] button. +#. when there is neither a detected scanner nor an active scanner or driver +#. and then the user clicked the [Edit] button. +#. Translate 'Edit' to the exact label of the [Edit] button. +#: src/include/scanner/dialogs.rb:284 src/include/scanner/dialogs.rb:300 msgid "Edit Not Possible" msgstr "편집은 불가능합니다." -#. Body of a Popup::AnyMessage when an active driver -#. without a matching active scanner was selected -#. and then the user clicked the [Edit] button: -#. Translate 'delete' to the exact label of the [Delete] button. -#. Body of a Popup::AnyMessage when an active driver -#. without a matching active scanner was selected -#. and then the user clicked the [Test] button: -#. Translate 'delete' to the exact label of the [Delete] button. -#: src/include/scanner/dialogs.rb:289 src/include/scanner/dialogs.rb:497 +#. Body of a Popup::AnyMessage when an active driver +#. without a matching active scanner was selected +#. and then the user clicked the [Edit] button: +#. Translate 'delete' to the exact label of the [Delete] button. +#. Body of a Popup::AnyMessage when an active driver +#. without a matching active scanner was selected +#. and then the user clicked the [Test] button: +#. Translate 'delete' to the exact label of the [Delete] button. +#: src/include/scanner/dialogs.rb:289 src/include/scanner/dialogs.rb:497 msgid "It is only possible to delete a driver without a matching scanner." msgstr "일치하는 스캐너가 없으면 드라이버의 삭제만 가능합니다." -#. Body of a Popup::AnyMessage when there is only the fallback entry -#. when there is neither a detected scanner nor an active scanner or driver -#. and then the user clicked the [Edit] button. -#. Translate 'add' to the exact label of the [Add] button. -#. Body of a Popup::AnyMessage when there is only the fallback entry -#. when there is neither a detected scanner nor an active scanner or driver -#. and then the user clicked the [Delete] button. -#. Translate 'add' to the exact label of the [Add] button. -#. Body of a Popup::AnyMessage when there is only the fallback entry -#. when there is neither a detected scanner nor an active scanner or driver -#. and then the user clicked the [Test] button. -#. Translate 'add' to the exact label of the [Add] button. -#: src/include/scanner/dialogs.rb:305 src/include/scanner/dialogs.rb:374 -#: src/include/scanner/dialogs.rb:513 +#. Body of a Popup::AnyMessage when there is only the fallback entry +#. when there is neither a detected scanner nor an active scanner or driver +#. and then the user clicked the [Edit] button. +#. Translate 'add' to the exact label of the [Add] button. +#. Body of a Popup::AnyMessage when there is only the fallback entry +#. when there is neither a detected scanner nor an active scanner or driver +#. and then the user clicked the [Delete] button. +#. Translate 'add' to the exact label of the [Add] button. +#. Body of a Popup::AnyMessage when there is only the fallback entry +#. when there is neither a detected scanner nor an active scanner or driver +#. and then the user clicked the [Test] button. +#. Translate 'add' to the exact label of the [Add] button. +#: src/include/scanner/dialogs.rb:305 src/include/scanner/dialogs.rb:374 +#: src/include/scanner/dialogs.rb:513 msgid "It is only possible to add a scanner." msgstr "스캐너 추가만 가능합니다." -#. which is not yet configured was selected -#. and then the user clicked the [Delete] button. -#. Translate 'Delete' to the exact label of the [Delete] button. -#. when there is neither a detected scanner nor an active scanner or driver -#. and then the user clicked the [Delete] button. -#. Translate 'Delete' to the exact label of the [Delete] button. -#: src/include/scanner/dialogs.rb:355 src/include/scanner/dialogs.rb:369 +#. which is not yet configured was selected +#. and then the user clicked the [Delete] button. +#. Translate 'Delete' to the exact label of the [Delete] button. +#. when there is neither a detected scanner nor an active scanner or driver +#. and then the user clicked the [Delete] button. +#. Translate 'Delete' to the exact label of the [Delete] button. +#: src/include/scanner/dialogs.rb:355 src/include/scanner/dialogs.rb:369 msgid "Delete Not Possible" msgstr "삭제는 불가능합니다." -#. Body of a Popup::AnyMessage when an autodetected scanner -#. which is not yet configured was selected -#. and then the user clicked the [Delete] button: -#. Translate 'edit' to the exact label of the [Edit] button. -#. Body of a Popup::AnyMessage when an autodetected scanner -#. which is not yet configured was selected -#. and then the user clicked the [Test] button: -#. Translate 'edit' to the exact label of the [Edit] button. -#: src/include/scanner/dialogs.rb:360 src/include/scanner/dialogs.rb:482 +#. Body of a Popup::AnyMessage when an autodetected scanner +#. which is not yet configured was selected +#. and then the user clicked the [Delete] button: +#. Translate 'edit' to the exact label of the [Edit] button. +#. Body of a Popup::AnyMessage when an autodetected scanner +#. which is not yet configured was selected +#. and then the user clicked the [Test] button: +#. Translate 'edit' to the exact label of the [Edit] button. +#: src/include/scanner/dialogs.rb:360 src/include/scanner/dialogs.rb:482 msgid "It is only possible to edit a detected scanner." msgstr "검색된 스캐너만 편집할 수 있습니다." -#. where %1 will be replaced by the driver name: -#: src/include/scanner/dialogs.rb:426 +#. where %1 will be replaced by the driver name: +#: src/include/scanner/dialogs.rb:426 msgid "Deactivate %1?" msgstr "%1을(를) 비활성화하시겠습니까?" -#. where %1 will be replaced by the driver (backend) name. -#. Only a simple message because before the function Scanner::DeactivateBackend -#. was called and this function would have shown more specific messages. -#. Only a simple message because before the function Scanner::DeactivateBackend -#. was called and this function would have shown more specific messages. -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/include/scanner/dialogs.rb:438 src/include/scanner/dialogs.rb:971 -#: src/modules/Scanner.rb:2261 +#. where %1 will be replaced by the driver (backend) name. +#. Only a simple message because before the function Scanner::DeactivateBackend +#. was called and this function would have shown more specific messages. +#. Only a simple message because before the function Scanner::DeactivateBackend +#. was called and this function would have shown more specific messages. +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/include/scanner/dialogs.rb:438 src/include/scanner/dialogs.rb:971 +#: src/modules/Scanner.rb:2261 msgid "Failed to deactivate %1." msgstr "%1 비활성화에 실패했습니다." -#. which is not yet configured was selected -#. and then the user clicked the [Test] button. -#. Translate 'Test' to the exact label of the [Test] button. -#. without a matching active scanner was selected -#. and then the user clicked the [Test] button. -#. Translate 'Test' to the exact label of the [Test] button. -#. when there is neither a detected scanner nor an active scanner or driver -#. and then the user clicked the [Test] button. -#. Translate 'Test' to the exact label of the [Test] button. -#: src/include/scanner/dialogs.rb:477 src/include/scanner/dialogs.rb:492 -#: src/include/scanner/dialogs.rb:508 +#. which is not yet configured was selected +#. and then the user clicked the [Test] button. +#. Translate 'Test' to the exact label of the [Test] button. +#. without a matching active scanner was selected +#. and then the user clicked the [Test] button. +#. Translate 'Test' to the exact label of the [Test] button. +#. when there is neither a detected scanner nor an active scanner or driver +#. and then the user clicked the [Test] button. +#. Translate 'Test' to the exact label of the [Test] button. +#: src/include/scanner/dialogs.rb:477 src/include/scanner/dialogs.rb:492 +#: src/include/scanner/dialogs.rb:508 msgid "Test Not Possible" msgstr "테스트는 불가능합니다." -#. Only a simple message because before the function Scanner::TestBackend -#. was called and this function would have shown more specific messages. -#: src/include/scanner/dialogs.rb:542 +#. Only a simple message because before the function Scanner::TestBackend +#. was called and this function would have shown more specific messages. +#: src/include/scanner/dialogs.rb:542 msgid "Failed to test %1." msgstr "%1 테스트에 실패했습니다." -#. Only a simple message because before the function Scanner::RunHpsetup -#. was called and this function would have shown more specific messages. -#. Do not change or translate "hp-setup", it is a program name: -#: src/include/scanner/dialogs.rb:582 +#. Only a simple message because before the function Scanner::RunHpsetup +#. was called and this function would have shown more specific messages. +#. Do not change or translate "hp-setup", it is a program name: +#: src/include/scanner/dialogs.rb:582 msgid "Failed to run hp-setup." msgstr "hp-setup을 실행하지 못했습니다." -#. Select model dialog -#. @return dialog result -#: src/include/scanner/dialogs.rb:605 +#. Select model dialog +#. @return dialog result +#: src/include/scanner/dialogs.rb:605 msgid "Scanner Model and Driver Selection" msgstr "스캐너 모델 및 드라이버 선택" -#. Header of a TextEntry user input field to enter a search string: -#: src/include/scanner/dialogs.rb:662 +#. Header of a TextEntry user input field to enter a search string: +#: src/include/scanner/dialogs.rb:662 msgid "S&earch String" msgstr "문자열 검색(&E)" -#. Label of a PushButton to search a list for a search string: -#: src/include/scanner/dialogs.rb:675 +#. Label of a PushButton to search a list for a search string: +#: src/include/scanner/dialogs.rb:675 msgid "&Search" msgstr "검색(&S)" -#. Label of a PushButton to show all entries of a list: -#: src/include/scanner/dialogs.rb:680 +#. Label of a PushButton to show all entries of a list: +#: src/include/scanner/dialogs.rb:680 msgid "Show Complete &List" msgstr "전체 목록 표시(&L)" -#. Header of a SelectionBox with a list of models: -#. Header of a SelectionBox with a list of models: -#: src/include/scanner/dialogs.rb:688 src/include/scanner/dialogs.rb:724 +#. Header of a SelectionBox with a list of models: +#. Header of a SelectionBox with a list of models: +#: src/include/scanner/dialogs.rb:688 src/include/scanner/dialogs.rb:724 msgid "Scanner &Models" msgstr "스캐너 모델(&M)" -#. Header of a SelectionBox with the complete list of models: -#: src/include/scanner/dialogs.rb:740 +#. Header of a SelectionBox with the complete list of models: +#: src/include/scanner/dialogs.rb:740 msgid "All Scanner &Models" msgstr "모든 스캐너 모델(&M)" -#. Compare how the ModelItems function builds the matching status_strings by using the same logic: -#: src/include/scanner/dialogs.rb:773 +#. Compare how the ModelItems function builds the matching status_strings by using the same logic: +#: src/include/scanner/dialogs.rb:773 msgid "Unsupported Model" msgstr "지원되지 않는 모델" -#. Body of a Popup::AnyMessage when an unsupported model was selected: -#: src/include/scanner/dialogs.rb:775 +#. Body of a Popup::AnyMessage when an unsupported model was selected: +#: src/include/scanner/dialogs.rb:775 msgid "" "This model is not supported.\n" "Ask the manufacturer for a Linux driver." @@ -234,16 +234,16 @@ "이 모델은 지원되지 않습니다.\n" "제조업체에 연락하여 Linux 드라이버에 대해 문의하십시오." -#. which is listed as "unsupported" for a particular driver: -#. %1 will be replaced by the backend (scanner driver) name -#: src/include/scanner/dialogs.rb:784 +#. which is listed as "unsupported" for a particular driver: +#. %1 will be replaced by the backend (scanner driver) name +#: src/include/scanner/dialogs.rb:784 msgid "Model Not Supported by the Driver %1" msgstr "%1 드라이버에 의해 지원되지 않는 모델" -#. Header of a Popup::AnyMessage when a model was selected -#. Body of a Popup::AnyMessage when a model was selected -#. which is listed as "unsupported" for a particular driver: -#: src/include/scanner/dialogs.rb:789 +#. Header of a Popup::AnyMessage when a model was selected +#. Body of a Popup::AnyMessage when a model was selected +#. which is listed as "unsupported" for a particular driver: +#: src/include/scanner/dialogs.rb:789 msgid "" "Check if another driver supports it,\n" "select a compatible model,\n" @@ -253,46 +253,41 @@ "호환 모델을 선택하거나, 제조업체에 연락하여\n" " Linux 드라이버에 대해 문의하십시오." -#. on a non-i386-compatible architecture (i.e. neither i386 nor x86_64). -#: src/include/scanner/dialogs.rb:832 +#. on a non-i386-compatible architecture (i.e. neither i386 nor x86_64). +#: src/include/scanner/dialogs.rb:832 msgid "Unsupported Driver" msgstr "지원되지 않는 드라이버" -#. Body of a Popup::AnyMessage when the epkowa driver was selected -#. on a non-i386-compatible architecture (i.e. neither i386 nor x86_64). -#. Do not change or translate "epkowa", it is a driver name. -#. Do not change or translate "i386", it is an architecture name. -#: src/include/scanner/dialogs.rb:837 -msgid "" -"The epkowa driver is only available for i386-compatible architectures (32-" -"bit i386 and also 64-bit x86_64)." -msgstr "" -"epkowa 드라이버는 i386 호환 아키텍처(32비트 i386 및 64비트 x86_64)에만 사용" -"할 수 있습니다." +#. Body of a Popup::AnyMessage when the epkowa driver was selected +#. on a non-i386-compatible architecture (i.e. neither i386 nor x86_64). +#. Do not change or translate "epkowa", it is a driver name. +#. Do not change or translate "i386", it is an architecture name. +#: src/include/scanner/dialogs.rb:837 +msgid "The epkowa driver is only available for i386-compatible architectures (32-bit i386 and also 64-bit x86_64)." +msgstr "epkowa 드라이버는 i386 호환 아키텍처(32비트 i386 및 64비트 x86_64)에만 사용할 수 있습니다." -#. when the epkowa driver was selected on x86_64: -#: src/include/scanner/dialogs.rb:845 +#. when the epkowa driver was selected on x86_64: +#: src/include/scanner/dialogs.rb:845 msgid "Possibly Problematic Driver" msgstr "문제를 일으킬 수 있는 드라이버" -#. Body of a Popup::ContinueCancelHeadline -#. when the epkowa driver was selected on x86_64. -#. Do not change or translate "epkowa", it is a driver name. -#: src/include/scanner/dialogs.rb:849 +#. Body of a Popup::ContinueCancelHeadline +#. when the epkowa driver was selected on x86_64. +#. Do not change or translate "epkowa", it is a driver name. +#: src/include/scanner/dialogs.rb:849 msgid "The epkowa driver may cause problems on 64-bit x86_64 architecture." -msgstr "" -"epkowa 드라이버는 64비트 x86_64 아키텍처에서 문제를 발생시킬 수도 있습니다." +msgstr "epkowa 드라이버는 64비트 x86_64 아키텍처에서 문제를 발생시킬 수도 있습니다." -#. when the outdated hpoj driver was selected: -#: src/include/scanner/dialogs.rb:865 +#. when the outdated hpoj driver was selected: +#: src/include/scanner/dialogs.rb:865 msgid "Outdated Driver" msgstr "오래된 드라이버" -#. Body of a Popup::ContinueCancelHeadline -#. when the outdated hpoj driver was selected. -#. Do not change or translate "hpoj", it is a driver name. -#. Do not change or translate "hpaio", it is a driver name. -#: src/include/scanner/dialogs.rb:870 +#. Body of a Popup::ContinueCancelHeadline +#. when the outdated hpoj driver was selected. +#. Do not change or translate "hpoj", it is a driver name. +#. Do not change or translate "hpaio", it is a driver name. +#: src/include/scanner/dialogs.rb:870 msgid "" "The hpoj driver should work but it is no longer maintained.\n" "Try to use the up-to-date driver hpaio." @@ -300,70 +295,70 @@ "hpoj 드라이버가 작동해야 하지만, 더 이상 유지관리되지 않습니다.\n" "최신 드라이버 hpaio를 사용해 보십시오." -#. Configure backend dialog -#. @return dialog result -#: src/include/scanner/dialogs.rb:892 +#. Configure backend dialog +#. @return dialog result +#: src/include/scanner/dialogs.rb:892 msgid "Scanner and Driver Setup" msgstr "스캐너 및 드라이버 설정" -#. Only a simple message because before the function Scanner::ActivateBackend -#. was called and this function would have shown more specific messages. -#: src/include/scanner/dialogs.rb:940 +#. Only a simple message because before the function Scanner::ActivateBackend +#. was called and this function would have shown more specific messages. +#: src/include/scanner/dialogs.rb:940 msgid "Failed to activate %1." msgstr "%1 활성화에 실패했습니다." -#. Caption of the ConfigureNetworkScanningDialog: -#: src/include/scanner/dialogs.rb:1005 +#. Caption of the ConfigureNetworkScanningDialog: +#: src/include/scanner/dialogs.rb:1005 msgid "Set Up Scanning via Network" msgstr "네트워크를 통한 스캔 설정" -#. Header of a TextEntry user input field. -#. Do not change or translate "saned", it is a program (sane daemon) name. -#: src/include/scanner/dialogs.rb:1008 +#. Header of a TextEntry user input field. +#. Do not change or translate "saned", it is a program (sane daemon) name. +#: src/include/scanner/dialogs.rb:1008 msgid "Permitted &Clients for saned" msgstr "saned에 대해 허가된 클라이언트(&C)" -#. Header of a TextEntry user input field. -#. Do not change or translate "net", it is a metadriver name. -#. Do not simply use "driver" because net is no normal driver but a metadriver. -#: src/include/scanner/dialogs.rb:1012 +#. Header of a TextEntry user input field. +#. Do not change or translate "net", it is a metadriver name. +#. Do not simply use "driver" because net is no normal driver but a metadriver. +#: src/include/scanner/dialogs.rb:1012 msgid "&Servers Used for the net Metadriver" msgstr "net 메타드라이버에 사용할 서버(&S)" -#. All contenst of the scanning via network dialog: -#: src/include/scanner/dialogs.rb:1023 +#. All contenst of the scanning via network dialog: +#: src/include/scanner/dialogs.rb:1023 msgid "Server Settings" msgstr "서버 설정" -#. Label of a Frame for the server settings for scanning via network. -#: src/include/scanner/dialogs.rb:1032 +#. Label of a Frame for the server settings for scanning via network. +#: src/include/scanner/dialogs.rb:1032 msgid "Client Settings" msgstr "클라이언트 설정" -#. Label of a Frame for the client settings for scanning via network. -#: src/include/scanner/dialogs.rb:1041 +#. Label of a Frame for the client settings for scanning via network. +#: src/include/scanner/dialogs.rb:1041 msgid "Predefined Configurations" msgstr "사전 정의된 구성" -#. Label of a PushButton for a predefined configuration. -#. Be careful when you change or translate "local host configuration" -#. because this term is used also in the help text -#. and in a message of a Popup::ContinueCancel -#: src/include/scanner/dialogs.rb:1050 +#. Label of a PushButton for a predefined configuration. +#. Be careful when you change or translate "local host configuration" +#. because this term is used also in the help text +#. and in a message of a Popup::ContinueCancel +#: src/include/scanner/dialogs.rb:1050 msgid "&Local Host Configuration" msgstr "로컬 호스트 구성(&L)" -#. Label of a PushButton to disable scanning via network. -#. Do not confuse "scanning via network" -#. (i.e. use a remote scanner via another host in the network) -#. with "scanning the network" -#. (i.e. scan the network for other hosts or services). -#: src/include/scanner/dialogs.rb:1061 +#. Label of a PushButton to disable scanning via network. +#. Do not confuse "scanning via network" +#. (i.e. use a remote scanner via another host in the network) +#. with "scanning the network" +#. (i.e. scan the network for other hosts or services). +#: src/include/scanner/dialogs.rb:1061 msgid "&Disable Scanning via Network" msgstr "네트워크를 통한 스캔 비활성화(&D)" -#. Read dialog help 1/1: -#: src/include/scanner/helps.rb:36 +#. Read dialog help 1/1: +#: src/include/scanner/helps.rb:36 msgid "" "<p>\n" "<b><big>Initializing Scanner Configuration</big></b><br>\n" @@ -375,8 +370,8 @@ " 잠시 기다려 주십시오...\n" " </p>" -#. Write dialog help 1/1: -#: src/include/scanner/helps.rb:44 +#. Write dialog help 1/1: +#: src/include/scanner/helps.rb:44 msgid "" "<p>\n" "<b><big>Saving Scanner Configuration</big></b><br>\n" @@ -388,45 +383,41 @@ " 잠시 기다려 주십시오...\n" " </p>" -#. Overview dialog help 1/8: -#: src/include/scanner/helps.rb:52 +#. Overview dialog help 1/8: +#: src/include/scanner/helps.rb:52 msgid "" "<p>\n" "<b><big>Scanner Configuration</big></b><br>\n" -"Set up or change the scanner configuration and show the already active " -"scanners.\n" +"Set up or change the scanner configuration and show the already active scanners.\n" "</p>" msgstr "" "<p>\n" "<b><big>스캐너 구성</big></b><br>\n" -" 스캐너 구성을 설정 또는 변경하고 이미 활성화된 스캐너를 표시할 수 있습니" -"다.\n" +" 스캐너 구성을 설정 또는 변경하고 이미 활성화된 스캐너를 표시할 수 있습니다.\n" " </p>" -#. Overview dialog help 2/8: -#: src/include/scanner/helps.rb:59 +#. Overview dialog help 2/8: +#: src/include/scanner/helps.rb:59 msgid "" "<p>\n" "To set up a new scanner, choose the scanner from the list of\n" "detected scanners and press <b>Edit</b>.\n" -"If your scanner has not been detected, use <b>Add</b> for a manual " -"configuration.\n" +"If your scanner has not been detected, use <b>Add</b> for a manual configuration.\n" "</p>" msgstr "" "<p>\n" "새 스캐너를 설정하려면 검색된 스캐너 목록에서 스캐너를 선택하고\n" " <b>편집</b>을 누르십시오.\n" -" 원하는 스캐너가 검색되지 않았으면 <b>추가</b>를 사용하여 수동으로 구성하십시" -"오.\n" +" 원하는 스캐너가 검색되지 않았으면 <b>추가</b>를 사용하여 수동으로 구성하십시오.\n" " </p>" -#. Overview dialog help 3/8: -#. Do not change or translate "HP", it is a manufacturer name. -#. Do not change or translate "OfficeJet", it is a model name. -#. Do not change or translate "PSC", it is a model (Printer Scanner Copier) name. -#. Do not change or translate "hp-setup", it is a command name. -#. Do not change or translate "lsusb", it is a command name. -#: src/include/scanner/helps.rb:72 +#. Overview dialog help 3/8: +#. Do not change or translate "HP", it is a manufacturer name. +#. Do not change or translate "OfficeJet", it is a model name. +#. Do not change or translate "PSC", it is a model (Printer Scanner Copier) name. +#. Do not change or translate "hp-setup", it is a command name. +#. Do not change or translate "lsusb", it is a command name. +#: src/include/scanner/helps.rb:72 msgid "" "<p>\n" "A normal USB scanner should be detected automatically.\n" @@ -443,8 +434,7 @@ "configure the scanner unit with this tool.\n" "If you have difficulties configuring your scanner,\n" "check whether it appears in the output of <tt>lsusb</tt>.\n" -"If it is not listed there, the USB system cannot communicate with the " -"scanner.\n" +"If it is not listed there, the USB system cannot communicate with the scanner.\n" "</p>\n" msgstr "" "<p>\n" @@ -458,25 +448,23 @@ "없으므로 스캐너를 다른 USB 장치와 구분할 수 있는 일반적인 방법은 없습니다.\n" "<b>추가</b>를 계속하십시오.\n" "HP all-in-one 장치의 경우 이 도구로 스캐너 장치를\n" -"구성하기 전에 <b>기타</b> 및 <b>hp-setup 실행</b>을 통해 <tt>hp-setup</tt>" -"을\n" +"구성하기 전에 <b>기타</b> 및 <b>hp-setup 실행</b>을 통해 <tt>hp-setup</tt>을\n" "실행해야 할 수도 있습니다.\n" "스캐너를 구성하는 데 문제가 있는 경우\n" "<tt>lsusb</tt> 출력에 표시되는지 여부를 확인하십시오.\n" "나열되지 않는 경우 USB 시스템이 스캐너와 통신할 수 없습니다.\n" "</p>\n" -#. Overview dialog help 4/8: -#. Do not change or translate "lsscsi", it is a command name. -#: src/include/scanner/helps.rb:93 +#. Overview dialog help 4/8: +#. Do not change or translate "lsscsi", it is a command name. +#: src/include/scanner/helps.rb:93 msgid "" "<p>\n" "SCSI scanners are normally detected.\n" "If difficulties arise proceeding with <b>Add</b>,\n" "check whether your scanner is shown by the command <tt>lsscsi</tt>.\n" "If not, the SCSI system cannot communicate with the scanner.\n" -"Verify that an appropriate kernel module for the SCSI host adapter has been " -"loaded.\n" +"Verify that an appropriate kernel module for the SCSI host adapter has been loaded.\n" "</p>" msgstr "" "<p>\n" @@ -487,9 +475,9 @@ " SCSI 호스트 어댑터에 대한 적절한 커널 모듈이 로드되었는지 확인하십시오.\n" " </p>" -#. Overview dialog help 5/8: -#. Do not change or translate "hp-setup", it is a command name. -#: src/include/scanner/helps.rb:104 +#. Overview dialog help 5/8: +#. Do not change or translate "hp-setup", it is a command name. +#: src/include/scanner/helps.rb:104 msgid "" "<p>\n" "Parallel port scanners cannot be configured with this tool\n" @@ -497,8 +485,7 @@ "Common parallel port scanners must be configured manually.\n" "To set up the scanner unit in a HP all-in-one device,\n" "which is connected to the parallel port,\n" -"you may have to run <tt>hp-setup</tt> via <b>Other</b> and <b>Run hp-setup\n" +"you may have to run <tt>hp-setup</tt> via <b>Other</b> and <b>Run hp-setup</b>\n" "before you can configure the scanner unit with this tool using <b>Add</b>.\n" "</p>\n" msgstr "" @@ -509,18 +496,17 @@ "병렬 포트에 연결된 HP all-in-one 장치에서\n" "스캐너 장치를 설정하려면\n" "<b>추가</b>를 사용하여 이 도구로 스캐너 장치를 구성하기 전에\n" -"<b>기타</b> 및 <b>hp-setup 실행</b>을 통해 <tt>hp-setup</tt>을 설정해야 할 수" -"도 있습니다.\n" +"<b>기타</b> 및 <b>hp-setup 실행</b>을 통해 <tt>hp-setup</tt>을 설정해야 할 수도 있습니다.\n" "</p>\n" -#. Overview dialog help 6/8: -#. Do not confuse a "network scanner" (i.e. a scanner which is directly accessible in the network) -#. with a "network scanner" (i.e. a program which scans the network for other hosts or services) -#. or with a "remote scanner" (i.e. a scanner which is connected to another host in the network). -#. Do not confuse "scanning via network" (i.e. use a remote scanner via another host in the network) -#. with "scanning the network" (i.e. scan the network for other hosts or services). -#. Do not change or translate "hp-setup", it is a command name. -#: src/include/scanner/helps.rb:122 +#. Overview dialog help 6/8: +#. Do not confuse a "network scanner" (i.e. a scanner which is directly accessible in the network) +#. with a "network scanner" (i.e. a program which scans the network for other hosts or services) +#. or with a "remote scanner" (i.e. a scanner which is connected to another host in the network). +#. Do not confuse "scanning via network" (i.e. use a remote scanner via another host in the network) +#. with "scanning the network" (i.e. scan the network for other hosts or services). +#. Do not change or translate "hp-setup", it is a command name. +#: src/include/scanner/helps.rb:122 msgid "" "<p>\n" "Network scanners cannot be configured with this tool\n" @@ -532,43 +518,38 @@ "connected to another host in the network.\n" "To set up the scanner unit in a HP all-in-one device,\n" "which is connected via a built-in network interface,\n" -"you may have to run <tt>hp-setup</tt> via <b>Other</b> and <b>Run hp-setup\n" -"before it works to configure the scanner unit with this tool using <b>Add.\n" +"you may have to run <tt>hp-setup</tt> via <b>Other</b> and <b>Run hp-setup</b>\n" +"before it works to configure the scanner unit with this tool using <b>Add</b>.\n" "</p>\n" msgstr "" "<p>\n" "HP all-in-one 장치를 제외하고 이 도구로 네트워크 스캐너를\n" "구성할 수 없습니다.\n" "네트워크 스캐너는 수동으로 구성해야 합니다.\n" -"네트워크 스캐너는 네트워크에서 직접 액세스할 수 있도록 네트워크 인터페이스가 " -"있는 스캐너입니다.\n" +"네트워크 스캐너는 네트워크에서 직접 액세스할 수 있도록 네트워크 인터페이스가 있는 스캐너입니다.\n" "반면, 네트워크를 통한 스캔은 네트워크의 다른 호스트에 연결된\n" "원격 스캐너에 액세스하는 것을 의미합니다.\n" "기본 제공 네트워크 인터페이스를 통해 연결된\n" "HP all-in-one 장치에서 스캐너 장치를 설정하려면\n" "<b>추가</b>를 사용하여 이 도구로 스캐너 장치를 구성하기 전에\n" -"<b>기타</b> 및 <b>hp-setup 실행</b>을 통해 <tt>hp-setup</tt>을 설정해야 할 수" -"도 있습니다.\n" +"<b>기타</b> 및 <b>hp-setup 실행</b>을 통해 <tt>hp-setup</tt>을 설정해야 할 수도 있습니다.\n" "</p>\n" -#. Overview dialog help 7/8: -#. Do not confuse "scanning via network" (i.e. use a remote scanner via another host in the network) -#. with "scanning the network" (i.e. scan the network for other hosts or services). -#. It is not possible to modify or remove an active scanner directly. -#. It is only possible to modify or remove a driver and this way -#. all scanners which are associated with this driver are modified or removed. -#. Do not change or translate "hp-setup", it is a command name. -#: src/include/scanner/helps.rb:144 +#. Overview dialog help 7/8: +#. Do not confuse "scanning via network" (i.e. use a remote scanner via another host in the network) +#. with "scanning the network" (i.e. scan the network for other hosts or services). +#. It is not possible to modify or remove an active scanner directly. +#. It is only possible to modify or remove a driver and this way +#. all scanners which are associated with this driver are modified or removed. +#. Do not change or translate "hp-setup", it is a command name. +#: src/include/scanner/helps.rb:144 msgid "" "<p>\n" "The table lists the configured drivers with their associated scanners.\n" "Press <b>Add</b> to select model and driver and enable it.\n" "Press <b>Edit</b> to select and enable a driver.\n" "Press <b>Delete</b> to disable the driver.\n" -"If you press <b>Other</b>, you can restart the detection, test enabled " -"drivers,\n" +"If you press <b>Other</b>, you can restart the detection, test enabled drivers,\n" "set up HP all-in-one devices, or set up scanning via network.\n" "</p>" msgstr "" @@ -577,28 +558,26 @@ "모델과 드라이버를 선택하고 활성화하려면 <b>추가</b>를 누르십시오.\n" "드라이버를 선택하고 활성화하려면 <b>편집</b>을 누르십시오.\n" "드라이버를 비활성화하려면 <b>삭제</b>를 누르십시오.\n" -"<b>기타</b>를 누르면 검색을 다시 시작하거나, 활성화된 드라이버를 테스트하거" -"나,\n" +"<b>기타</b>를 누르면 검색을 다시 시작하거나, 활성화된 드라이버를 테스트하거나,\n" "HP all-in-one 장치를 설정하거나, 네트워크를 통한 검색을 설정할 수 있습니다.\n" " </p>" -#. Overview dialog help 8/8: -#. The most often problem which is reported by users regarding scanner setup is -#. when a driver was set up but then no scanner was recognized by this driver. -#. If the driver is the right one for the scanner, then in very most cases -#. the reason is a low-level (kernel related) device communication problem -#. (i.e. a low-level USB problem or a low-level SCSI problem). -#. Those problems cannot be fixed from within the YaST scanner setup module -#. but at least the user must be informed. -#. Be careful when you change or translate "No scanner recognized by this driver" -#. because exactly this text is shown here to the user in this case. -#. In particular keep the meaning of "recognize" because the driver actually runs -#. but the running driver fails to recognize the scanner. -#: src/include/scanner/helps.rb:166 +#. Overview dialog help 8/8: +#. The most often problem which is reported by users regarding scanner setup is +#. when a driver was set up but then no scanner was recognized by this driver. +#. If the driver is the right one for the scanner, then in very most cases +#. the reason is a low-level (kernel related) device communication problem +#. (i.e. a low-level USB problem or a low-level SCSI problem). +#. Those problems cannot be fixed from within the YaST scanner setup module +#. but at least the user must be informed. +#. Be careful when you change or translate "No scanner recognized by this driver" +#. because exactly this text is shown here to the user in this case. +#. In particular keep the meaning of "recognize" because the driver actually runs +#. but the running driver fails to recognize the scanner. +#: src/include/scanner/helps.rb:166 msgid "" "<p>\n" -"If a driver is set up but no scanner is recognized by the driver, possible " -"reasons are:\n" +"If a driver is set up but no scanner is recognized by the driver, possible reasons are:\n" "The scanner is not connected or switched off,\n" "the driver is not the right one for the particular model\n" "(even small differences in model names or internal differences in\n" @@ -608,8 +587,7 @@ "</p>" msgstr "" "<p>\n" -"드라이버가 설정되었지만 드라이버가 스캐너를 인식하지 못하는 경우 가능한 이유" -"는 다음과 같습니다.\n" +"드라이버가 설정되었지만 드라이버가 스캐너를 인식하지 못하는 경우 가능한 이유는 다음과 같습니다.\n" "스캐너가 연결되어 있지 않거나 전원이 켜져 있습니다.\n" "드라이버가 특정 모델에 적합한 드라이버가 아닙니다\n" "(모델 이름의 사소한 차이 또는 동일한 모델의 내부 차이로도\n" @@ -618,84 +596,68 @@ "(예: 낮은 수준의 USB 문제 또는 낮은 수준의 SCSI 문제).\n" "</p>" -#. SelectModel dialog help 1/5: -#. Do not change or translate "SANE", it is a project name. -#: src/include/scanner/helps.rb:180 +#. SelectModel dialog help 1/5: +#. Do not change or translate "SANE", it is a project name. +#: src/include/scanner/helps.rb:180 msgid "" "<p>\n" "<b><big>Scanner Model Selection</big></b><br>\n" "All known scanner models, both supported and unsupported, are listed here.\n" -"Read all information carefully before selecting a model and pressing " -"<b>Next</b>.\n" +"Read all information carefully before selecting a model and pressing <b>Next</b>.\n" "The information is based on data of the SANE project at\n" "<tt>http://www.sane-project.org/</tt>.\n" "</p>" msgstr "" "<p>\n" "<b><big>스캐너 모델 선택</big></b><br>\n" -" 지원되는 것과 지원되지 않는 것을 포함하여 모든 알려진 스캐너 모델이 여기 열" -"거됩니다.\n" -" 모델을 선택하고 <b>다음</b>을 누르기에 앞서 모든 정보를 신중하게 읽어보십시" -"오.\n" +" 지원되는 것과 지원되지 않는 것을 포함하여 모든 알려진 스캐너 모델이 여기 열거됩니다.\n" +" 모델을 선택하고 <b>다음</b>을 누르기에 앞서 모든 정보를 신중하게 읽어보십시오.\n" " 여기서 제공하는 정보는 <tt>http://www.sane-project.org/</tt>에\n" " 있는 SANE 프로젝트의 데이터를 기반으로 합니다.\n" " </p>" -#. SelectModel dialog help 2/5: -#. Do not change or translate "SANE", it is a project name. -#. Do not change or translate "sane-backends", it is a package name. -#: src/include/scanner/helps.rb:192 +#. SelectModel dialog help 2/5: +#. Do not change or translate "SANE", it is a project name. +#. Do not change or translate "sane-backends", it is a package name. +#: src/include/scanner/helps.rb:192 msgid "" "<p>\n" -"A model is supported if there is at least one appropriate scanner driver " -"available.\n" -"Most scanner drivers are from the SANE project and provided in the sane-" -"backends package.\n" -"The support status for a particular model varies from minimal to complete." -"<br>\n" -"When a driver is shown as 'unmaintained', it does not mean that the driver " -"does not work.\n" +"A model is supported if there is at least one appropriate scanner driver available.\n" +"Most scanner drivers are from the SANE project and provided in the sane-backends package.\n" +"The support status for a particular model varies from minimal to complete.<br>\n" +"When a driver is shown as 'unmaintained', it does not mean that the driver does not work.\n" "Even an unmaintained driver could work perfectly well.\n" -"But it means that there is no longer someone who knows about the driver " -"internals\n" -"so that there is usually no help if there are issues with an unmaintained " -"driver.\n" +"But it means that there is no longer someone who knows about the driver internals\n" +"so that there is usually no help if there are issues with an unmaintained driver.\n" "</p>" msgstr "" "<p>\n" "사용 가능한 스캐너 드라이버가 하나 이상 있는 경우 모델이 지원됩니다.\n" -"대부분의 스캐너 드라이버는 SANE 프로젝트에서 가져오며 sane-backends 패키지에 " -"제공됩니다.\n" +"대부분의 스캐너 드라이버는 SANE 프로젝트에서 가져오며 sane-backends 패키지에 제공됩니다.\n" "특정 모델에 대한 지원 상태는 최소에서 완료까지 다양합니다.<br>\n" -"드라이버가 '유지 관리되지 않음'으로 표시되는 경우 드라이버가 작동하지 않는 것" -"은 아닙니다.\n" +"드라이버가 '유지 관리되지 않음'으로 표시되는 경우 드라이버가 작동하지 않는 것은 아닙니다.\n" "유지 관리되지 않은 드라이버도 제대로 작동할 수 있습니다.\n" "그러나 드라이버 내부 요소에 대해 알고 있는 사람이 없으므로\n" -"유지 관리되지 않은 드라이버와 관련된 문제가 있을 경우 대체로 도움말이 없습니" -"다.\n" +"유지 관리되지 않은 드라이버와 관련된 문제가 있을 경우 대체로 도움말이 없습니다.\n" "</p>" -#. SelectModel dialog help 3/5: -#: src/include/scanner/helps.rb:204 +#. SelectModel dialog help 3/5: +#: src/include/scanner/helps.rb:204 msgid "" "<p>\n" -"Even if a model has no driver available, the manufacturer might have a " -"driver.\n" -"Therefore, you should ask the scanner manufacturer for a driver for an " -"unsupported scanner.\n" +"Even if a model has no driver available, the manufacturer might have a driver.\n" +"Therefore, you should ask the scanner manufacturer for a driver for an unsupported scanner.\n" "</p>" msgstr "" "<p>\n" -"모델에 대해 사용 가능한 드라이버가 여기에는 없더라도 제조업체에는 있을 것입니" -"다.\n" -" 따라서 지원되지 않는 스캐너에 대한 드라이버는 스캐너 제조업체에 문의하셔야 " -"합니다.\n" +"모델에 대해 사용 가능한 드라이버가 여기에는 없더라도 제조업체에는 있을 것입니다.\n" +" 따라서 지원되지 않는 스캐너에 대한 드라이버는 스캐너 제조업체에 문의하셔야 합니다.\n" " </p>" -#. SelectModel dialog help 4/5: -#. Add the following sentence to translations: -#. Such comments are only available in English. -#: src/include/scanner/helps.rb:213 +#. SelectModel dialog help 4/5: +#. Add the following sentence to translations: +#. Such comments are only available in English. +#: src/include/scanner/helps.rb:213 msgid "" "<p>\n" "When additional comments are available, they are shown in square brackets.\n" @@ -705,26 +667,20 @@ "사용 가능한 추가 설명이 있는 경우 대괄호로 표시됩니다.\n" " </p>" -#. SelectModel dialog help 4/5: -#. Do not change or translate "^Epson.*", "^Epson.*perfection", "^Epson.*1200": -#. These are intentionally selected actually working examples. -#: src/include/scanner/helps.rb:221 +#. SelectModel dialog help 4/5: +#. Do not change or translate "^Epson.*", "^Epson.*perfection", "^Epson.*1200": +#. These are intentionally selected actually working examples. +#: src/include/scanner/helps.rb:221 msgid "" "<p>\n" "Use the <b>Search String</b> to find an appropriate entry quickly.\n" "To find some text anywhere in the table, enter it in the field.\n" -"A more complicated search using a case-insensitive regular expression is " -"also possible.\n" -"If the scanner was detected and the manufacturer name is available in this " -"list,\n" -"the search string is preset with the manufacturer name, such as <tt>^Epson." -"*</tt>.\n" -"To refine the search results, append model-specific details to the search " -"string.\n" -"For example, append a word that is part of the model name as in <tt>^Epson." -"*perfection</tt>\n" -"or append some digits that are part of the model name as in <tt>^Epson." -"*1200</tt>.\n" +"A more complicated search using a case-insensitive regular expression is also possible.\n" +"If the scanner was detected and the manufacturer name is available in this list,\n" +"the search string is preset with the manufacturer name, such as <tt>^Epson.*</tt>.\n" +"To refine the search results, append model-specific details to the search string.\n" +"For example, append a word that is part of the model name as in <tt>^Epson.*perfection</tt>\n" +"or append some digits that are part of the model name as in <tt>^Epson.*1200</tt>.\n" "</p>" msgstr "" "<p>\n" @@ -734,33 +690,29 @@ " 스캐너가 검색되었고 제조업체 이름이 목록에 있으면, <tt>^Epson.*</tt>과\n" " 같이 제조업체의 이름으로 검색 문자열이 사전 설정됩니다.\n" " 검색 결과를 구체화하려면 검색 문자열에 모델 관련 세부 사항을 첨부하십시오.\n" -" 예를 들어, <tt>^Epson.*perfection</tt>과 같이 모델 이름의 일부인 단어를 첨부" -"하거나\n" -" <tt>^Epson.*1200</tt>과 같이 모델 이름의 일부인 몇몇 숫자를 첨부할 수 있습니" -"다.\n" +" 예를 들어, <tt>^Epson.*perfection</tt>과 같이 모델 이름의 일부인 단어를 첨부하거나\n" +" <tt>^Epson.*1200</tt>과 같이 모델 이름의 일부인 몇몇 숫자를 첨부할 수 있습니다.\n" " </p>" -#. ConfigureBackend dialog help 1/4: -#: src/include/scanner/helps.rb:235 +#. ConfigureBackend dialog help 1/4: +#: src/include/scanner/helps.rb:235 msgid "" "<p>\n" "<b><big>Scanner and Driver Setup</big></b><br>\n" "The driver is activated and the associated scanners are probed.\n" -"This may take a few seconds, so you must wait until you can press <b>Next.\n" +"This may take a few seconds, so you must wait until you can press <b>Next</b>.\n" "If you press <b>Back</b>, the driver is deactivated.\n" "</p>" msgstr "" "<p>\n" "<b><big>스캐너 및 드라이버 설정</big></b><br>\n" " 드라이버가 활성화되고 관련 스캐너가 검색됩니다.\n" -" 이 작업에는 몇 초가 걸릴 수 있으므로 <b>다음</b>을 누르기 전에 잠시 기다려" -"야 합니다.\n" +" 이 작업에는 몇 초가 걸릴 수 있으므로 <b>다음</b>을 누르기 전에 잠시 기다려야 합니다.\n" " <b>뒤로</b>를 누르면 드라이버가 비활성화됩니다.\n" " </p>" -#. ConfigureBackend dialog help 2/4: -#: src/include/scanner/helps.rb:244 +#. ConfigureBackend dialog help 2/4: +#: src/include/scanner/helps.rb:244 msgid "" "<p>\n" "<b><big>Additional Packages</big></b><br>\n" @@ -776,8 +728,8 @@ "모든 아키텍처에서 해당 패키지를 사용할 수 있는 것은 아닙니다.\n" "</p>" -#. ConfigureBackend dialog help 3/4: -#: src/include/scanner/helps.rb:253 +#. ConfigureBackend dialog help 3/4: +#: src/include/scanner/helps.rb:253 msgid "" "<p>\n" "<b><big>Firmware Upload</big></b><br>\n" @@ -791,29 +743,25 @@ " 그런 경우 해당 설명 텍스트가 표시됩니다.\n" " </p>" -#. ConfigureBackend dialog help 4/4: -#. Do not change or translate "HP", it is a manufacturer name. -#. Do not change or translate "HPOJ", it is a project name. -#. Do not change or translate "hp-officeJet", it is a package name. -#. Do not change or translate "PTAL", it is a subsystem name. -#. Do not change or translate "ptal", it is a service name. -#. Do not change or translate "HPLIP", it is a project name. -#. Do not change or translate "hpaio", it is a driver name. -#. The "for all" is crucial in "either ... or ... must be used for all HP all-in-one devices". -#: src/include/scanner/helps.rb:269 +#. ConfigureBackend dialog help 4/4: +#. Do not change or translate "HP", it is a manufacturer name. +#. Do not change or translate "HPOJ", it is a project name. +#. Do not change or translate "hp-officeJet", it is a package name. +#. Do not change or translate "PTAL", it is a subsystem name. +#. Do not change or translate "ptal", it is a service name. +#. Do not change or translate "HPLIP", it is a project name. +#. Do not change or translate "hpaio", it is a driver name. +#. The "for all" is crucial in "either ... or ... must be used for all HP all-in-one devices". +#: src/include/scanner/helps.rb:269 msgid "" "<p>\n" "<b><big>HP All-in-One Devices</big></b><br>\n" "HP all-in-one devices may require a special setup.\n" "In this case, an appropriate dialog is shown.\n" -"There are two software packages that provide support for HP all-in-one " -"devices:\n" -"the outdated HPOJ software (package hp-officeJet which is no longer " -"available),\n" -"which provides the PTAL system (with the ptal service) to access HP all-in-" -"one devices,\n" -"and the up-to-date HPLIP software (package hplip), which provides the hpaio " -"driver.\n" +"There are two software packages that provide support for HP all-in-one devices:\n" +"the outdated HPOJ software (package hp-officeJet which is no longer available),\n" +"which provides the PTAL system (with the ptal service) to access HP all-in-one devices,\n" +"and the up-to-date HPLIP software (package hplip), which provides the hpaio driver.\n" "Both software packages can be installed at the same time\n" "but the ptal service and the hpaio driver cannot run together.\n" "Therefore either the patl service or the hpaio driver\n" @@ -824,10 +772,8 @@ "<b><big>HP All-in-One 장치</big></b><br>\n" "HP All-in-One 장치는 특별 설정이 필요할 수 있습니다.\n" "이런 경우 해당 대화 상자가 표시됩니다.\n" -"HP All-in-One 장치에 대한 지원을 제공하는 두 가지 소프트웨어 패키지가 있습니" -"다.\n" -"즉, (ptal 서비스가 설치된) PTAL 시스템을 제공하여 HP All-in-One 장치에 액세스" -"하는\n" +"HP All-in-One 장치에 대한 지원을 제공하는 두 가지 소프트웨어 패키지가 있습니다.\n" +"즉, (ptal 서비스가 설치된) PTAL 시스템을 제공하여 HP All-in-One 장치에 액세스하는\n" "오래된 HPOJ 소프트웨어(더 이상 사용할 수 없는 hp-officeJet 패키지)와\n" "hpaio 드라이버를 제공하는 최신 HPLIP 소프트웨어(패키지 hplip)를 제공합니다.\n" "두 소프트웨어 패키지 모두 동시에 설치되지만\n" @@ -836,10 +782,10 @@ "ptal 또는 hpaio 드라이버 중 한 개만 사용해야 합니다.\n" "</p>" -#. ConfigureNetworkScanning dialog help 1/5: -#. Do not confuse "scanning via network" (i.e. use a remote scanner via another host in the network) -#. with "scanning the network" (i.e. scan the network for other hosts or services). -#: src/include/scanner/helps.rb:288 +#. ConfigureNetworkScanning dialog help 1/5: +#. Do not confuse "scanning via network" (i.e. use a remote scanner via another host in the network) +#. with "scanning the network" (i.e. scan the network for other hosts or services). +#: src/include/scanner/helps.rb:288 msgid "" "<p>\n" "<b><big>Scanning via Network</big></b><br>\n" @@ -853,21 +799,18 @@ " 네트워크를 통한 스캔을 설정할 수 있습니다.\n" " </p>" -#. ConfigureNetworkScanning dialog help 2/5: -#. Do not change or translate "saned", it is a program (sane daemon) name. -#. Do not change or translate "CIDR", it is a (sub)-network notation name. -#. Do not change or translate "192.168.1.0/24", it is an intentionally selected actually working example. -#. Do not change or translate "xinetd", it is a program (daemon) name. -#: src/include/scanner/helps.rb:300 +#. ConfigureNetworkScanning dialog help 2/5: +#. Do not change or translate "saned", it is a program (sane daemon) name. +#. Do not change or translate "CIDR", it is a (sub)-network notation name. +#. Do not change or translate "192.168.1.0/24", it is an intentionally selected actually working example. +#. Do not change or translate "xinetd", it is a program (daemon) name. +#: src/include/scanner/helps.rb:300 msgid "" "<p>\n" "<b><big>Server Settings</big></b><br>\n" -"If you have locally connected scanners and want to make them accessible via " -"the network,\n" -"set up the saned network scanning daemon so that your host becomes a " -"server.\n" -"In <b>Permitted Clients</b>, enter which client hosts are permitted to " -"access saned on your server.\n" +"If you have locally connected scanners and want to make them accessible via the network,\n" +"set up the saned network scanning daemon so that your host becomes a server.\n" +"In <b>Permitted Clients</b>, enter which client hosts are permitted to access saned on your server.\n" "Enter a comma-separated list of client hosts (hostnames or IP addresses)\n" "or subnets (CIDR notation, such as 192.168.1.0/24).\n" "If no client hosts are permitted, saned is not activated.\n" @@ -878,23 +821,21 @@ "<b><big>서버 설정</big></b><br>\n" "로컬에 연결된 스캐너가 있고 네트워크를 통해 액세스할 수 있게 하려는 경우\n" "호스트가 서버의 일부가 되도록 saned 네트워크 스캐닝 데몬을 설정하십시오.\n" -"<b>허가된 클라이언트</b>에서 서버의 saned에 액세스할 수 있는 클라이언트 호스" -"트를 입력하십시오.\n" +"<b>허가된 클라이언트</b>에서 서버의 saned에 액세스할 수 있는 클라이언트 호스트를 입력하십시오.\n" "클라이언트 호스트(호스트 이름 또는 IP 주소)\n" -"또는 서브넷(CIDR 표기법, 예: 192.168.1.0/24)의 쉼표로 구분된 목록을 입력하십" -"시오.\n" +"또는 서브넷(CIDR 표기법, 예: 192.168.1.0/24)의 쉼표로 구분된 목록을 입력하십시오.\n" "허가된 클라이언트 호스트가 없는 경우 saned가 활성화되지 않습니다.\n" "saned가 활성화된 경우 xinetd도 활성화되며 saned에 대해 설정됩니다.\n" "</p>" -#. ConfigureNetworkScanning dialog help 3/5: -#. Do not change or translate "saned", it is a program (sane daemon) name. -#. Do not change or translate "sane-port", it is a port name (see /etc/services). -#. Be careful when you change or translate "external", "internal", and "zone" -#. to keep the relationship to the matching terms in the YaST firewall setup module -#. where also "external zone", and "internal zone" is used. -#. Keep the information that external access is useless and insecure (see "man saned"). -#: src/include/scanner/helps.rb:319 +#. ConfigureNetworkScanning dialog help 3/5: +#. Do not change or translate "saned", it is a program (sane daemon) name. +#. Do not change or translate "sane-port", it is a port name (see /etc/services). +#. Be careful when you change or translate "external", "internal", and "zone" +#. to keep the relationship to the matching terms in the YaST firewall setup module +#. where also "external zone", and "internal zone" is used. +#. Keep the information that external access is useless and insecure (see "man saned"). +#: src/include/scanner/helps.rb:319 msgid "" "<p>\n" "<b><big>Regarding Firewall</big></b><br>\n" @@ -956,18 +897,16 @@ "http://en.opensuse.org/SDB:CUPS_and_SANE_Firewall_settings\n" "</p>" -#. ConfigureNetworkScanning dialog help 4/5: -#. Do not change or translate "net", it is a metadriver name. -#. Do not simply use "driver" because net is no normal driver but a metadriver. -#. Do not change or translate "saned", it is a program (sane daemon) name. -#: src/include/scanner/helps.rb:354 +#. ConfigureNetworkScanning dialog help 4/5: +#. Do not change or translate "net", it is a metadriver name. +#. Do not simply use "driver" because net is no normal driver but a metadriver. +#. Do not change or translate "saned", it is a program (sane daemon) name. +#: src/include/scanner/helps.rb:354 msgid "" "<p>\n" "<b><big>Client Settings</big></b><br>\n" -"If you want to access scanners connected to other hosts (servers) in the " -"network,\n" -"set up the net metadriver to access them via the daemon running on the " -"servers.\n" +"If you want to access scanners connected to other hosts (servers) in the network,\n" +"set up the net metadriver to access them via the daemon running on the servers.\n" "The saned and the firewall on the servers must permit the access.\n" "In <b>Servers Used</b>, enter which servers should be used.\n" "Enter a comma-separated list of servers (server names or IP addresses).\n" @@ -984,15 +923,15 @@ "서버를 입력하지 않으면 net이 활성화되지 않습니다.\n" "</p>" -#. ConfigureNetworkScanning dialog help 5/5: -#. Be careful when you change or translate "local host configuration" -#. because this term is used also in a message of a Popup::ContinueCancel -#. and as label of a PushButton for a predefined configuration. -#. Do not change or translate "saned", it is a program (sane daemon) name. -#. Do not change or translate "net", it is a metadriver name. -#. Do not simply use "driver" because net is no normal driver but a metadriver. -#. Do not change or translate "localhost", it is a fixed hostname for the local host. -#: src/include/scanner/helps.rb:373 +#. ConfigureNetworkScanning dialog help 5/5: +#. Be careful when you change or translate "local host configuration" +#. because this term is used also in a message of a Popup::ContinueCancel +#. and as label of a PushButton for a predefined configuration. +#. Do not change or translate "saned", it is a program (sane daemon) name. +#. Do not change or translate "net", it is a metadriver name. +#. Do not simply use "driver" because net is no normal driver but a metadriver. +#. Do not change or translate "localhost", it is a fixed hostname for the local host. +#: src/include/scanner/helps.rb:373 msgid "" "<p>\n" "<b><big>Local Host Configuration</big></b><br>\n" @@ -1014,15 +953,15 @@ " 로컬 호스트의 일반 사용자도 그러한 스캐너에 액세스할 수 있습니다.\n" " </p>" -#. Label of the dialog for ScannerAutoSequence: -#: src/include/scanner/wizards.rb:116 +#. Label of the dialog for ScannerAutoSequence: +#: src/include/scanner/wizards.rb:116 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. to add a preceding "The error message is:" comment -#. to display an error message where -#. %1 will be replaced by the actual error message: -#: src/modules/Scanner.rb:355 +#. to add a preceding "The error message is:" comment +#. to display an error message where +#. %1 will be replaced by the actual error message: +#: src/modules/Scanner.rb:355 msgid "" "The error message is:\n" "\n" @@ -1032,23 +971,22 @@ "\n" "%1" -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Scanner.rb:377 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Scanner.rb:377 msgid "Failed to determine the version of package %1." msgstr "%1 패키지의 버전 확인에 실패했습니다." -#. Message of a Popup::Error for models which require -#. the third-party Image Scan (IScan) driver software from Epson -#. (formerly Avasys, see https://bugzilla.novell.com/show_bug.cgi?id=746038). -#. Do not change or translate "Image Scan", it is a driver software name. -#. Do not change or translate "Avasys", it is a manufacturer name. -#. Do not change or translate "Epson", it is a manufacturer name. -#: src/modules/Scanner.rb:399 +#. Message of a Popup::Error for models which require +#. the third-party Image Scan (IScan) driver software from Epson +#. (formerly Avasys, see https://bugzilla.novell.com/show_bug.cgi?id=746038). +#. Do not change or translate "Image Scan", it is a driver software name. +#. Do not change or translate "Avasys", it is a manufacturer name. +#. Do not change or translate "Epson", it is a manufacturer name. +#: src/modules/Scanner.rb:399 msgid "" "The third-party Image Scan driver software from Epson/Avasys is required.\n" -"The Image Scan driver software is made and provided by Epson (formerly " -"Avasys)\n" +"The Image Scan driver software is made and provided by Epson (formerly Avasys)\n" "http://download.ebz.epson.net/dsc/search/01/search/?OSC=LXEpson\n" "(formerly Avasys http://avasys.jp/eng/linux_driver/)\n" "where RPM packages for 32-bit (i386) and 64-bit (x86_64) architecture\n" @@ -1063,8 +1001,7 @@ "model dependant 'iscan-plugin' package with the proprietary module.\n" msgstr "" "Epson/Avasys의 타사 이미지 스캔 드라이버 소프트웨어가 필요합니다.\n" -"이미지 스캔 드라이버 소프트웨어는 Epson(이전의 Avasys)에서 만들고 제공합니" -"다.\n" +"이미지 스캔 드라이버 소프트웨어는 Epson(이전의 Avasys)에서 만들고 제공합니다.\n" "http://download.ebz.epson.net/dsc/search/01/search/?OSC=LXEpson\n" "(이전의 Avasys http://avasys.jp/eng/linux_driver/)\n" "여기서 32비트(i386) 및 64비트(x86_64) 아키텍처용 RPM 패키지를\n" @@ -1078,45 +1015,37 @@ "기본 소프트웨어용 'iscan' 패키지 및 소유 모듈이 포함된 추가\n" "모델 종속 'iscan-plugin' 패키지\n" -#. Is the package available to be installed? -#. Package::Available returns nil if no package source is available. -#: src/modules/Scanner.rb:442 -msgid "" -"Required package %1 is not installed and there is no package repository " -"available." -msgstr "" -"필수 패키지 %1이(가) 설치되지 않았고 사용 가능한 패키지 리포지토리가 없습니" -"다." +#. Is the package available to be installed? +#. Package::Available returns nil if no package source is available. +#: src/modules/Scanner.rb:442 +msgid "Required package %1 is not installed and there is no package repository available." +msgstr "필수 패키지 %1이(가) 설치되지 않았고 사용 가능한 패키지 리포지토리가 없습니다." -#. Message of a Popup::Error where %1 will be replaced by the package name: -#: src/modules/Scanner.rb:457 -msgid "" -"Required package %1 is not installed and not available in the repository." -msgstr "" -"필수 패키지 %1이(가) 설치되지 않았고 리포지토리에 사용 가능한 항목이 없습니" -"다." +#. Message of a Popup::Error where %1 will be replaced by the package name: +#: src/modules/Scanner.rb:457 +msgid "Required package %1 is not installed and not available in the repository." +msgstr "필수 패키지 %1이(가) 설치되지 않았고 리포지토리에 사용 가능한 항목이 없습니다." -#. Only a simple message because: -#. Either the user has explicitly rejected to install the package, -#. or this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Scanner.rb:476 +#. Only a simple message because: +#. Either the user has explicitly rejected to install the package, +#. or this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Scanner.rb:476 msgid "Failed to install required package %1." msgstr "필요한 패키지 %1의 설치에 실패했습니다." -#. Message of a Popup::Error when there is no response from the 'scanimage' command. -#. Do not change or translate "net", it is a metadriver name. -#. Do not simply use "driver" because net is no normal driver but a metadriver. -#. Do not change or translate "scanimage -L", it is a fixed command. -#: src/modules/Scanner.rb:497 +#. Message of a Popup::Error when there is no response from the 'scanimage' command. +#. Do not change or translate "net", it is a metadriver name. +#. Do not simply use "driver" because net is no normal driver but a metadriver. +#. Do not change or translate "scanimage -L", it is a fixed command. +#: src/modules/Scanner.rb:497 msgid "" "Failed to determine the active scanners.\n" "If the net metadriver is activated while there is a problem\n" "with the network, the 'scanimage -L' command may not respond. For example,\n" "this may happen if communication with a server used by the net metadriver\n" "gets distorted because a firewall drops some network traffic.\n" -"In this case, disable the net metadriver until the issue in the network is " -"fixed.\n" +"In this case, disable the net metadriver until the issue in the network is fixed.\n" msgstr "" "활성 스캐너를 결정하지 못했습니다.\n" "net 메타드라이버가 활성화된 경우 네트워크 문제가 있는 동안\n" @@ -1125,170 +1054,170 @@ "사용되는 서버와의 통신이 왜곡되는 경우 이 문제가 발생할 수 있습니다.\n" "이 경우 네트워크 문제가 해결될 때까지 net 메타드라이버를 비활성화하십시오.\n" -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no active scanner was determined. -#. The latter results no error. -#: src/modules/Scanner.rb:519 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no active scanner was determined. +#. The latter results no error. +#: src/modules/Scanner.rb:519 msgid "Failed to determine the active scanners." msgstr "활성 스캐너 확인에 실패했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Scanner.rb:533 src/modules/Scanner.rb:591 -#: src/modules/Scanner.rb:650 src/modules/Scanner.rb:2500 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Scanner.rb:533 src/modules/Scanner.rb:591 +#: src/modules/Scanner.rb:650 src/modules/Scanner.rb:2500 msgid "File %1 does not exist." msgstr "%1 파일이 존재하지 않습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Scanner.rb:553 src/modules/Scanner.rb:611 -#: src/modules/Scanner.rb:670 src/modules/Scanner.rb:2520 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Scanner.rb:553 src/modules/Scanner.rb:611 +#: src/modules/Scanner.rb:670 src/modules/Scanner.rb:2520 msgid "Failed to read %1." msgstr "%1 파일 읽기에 실패했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no active driver was determined. -#. The latter results no error. -#: src/modules/Scanner.rb:577 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no active driver was determined. +#. The latter results no error. +#: src/modules/Scanner.rb:577 msgid "Failed to determine the active drivers." msgstr "활성 드라이버 확인에 실패했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no scanner was autodetected. -#. The latter results no error. -#: src/modules/Scanner.rb:636 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no scanner was autodetected. +#. The latter results no error. +#: src/modules/Scanner.rb:636 msgid "Failed to detect scanners automatically." msgstr "스캐너 자동 검색에 실패했습니다." -#. Global functions: -#. Read all scanner settings: -#. - Check installed packages -#. - Read or create the scanner database -#. - Determine active scanners -#. - Determine active backends -#. - Try to autodetect USB and SCSI scanners and HP all-in-one USB and NETWORK scanners -#. @return true on success -#: src/modules/Scanner.rb:766 +#. Global functions: +#. Read all scanner settings: +#. - Check installed packages +#. - Read or create the scanner database +#. - Determine active scanners +#. - Determine active backends +#. - Try to autodetect USB and SCSI scanners and HP all-in-one USB and NETWORK scanners +#. @return true on success +#: src/modules/Scanner.rb:766 msgid "Initializing Scanner Configuration" msgstr "스캐너 구성 초기화" -#: src/modules/Scanner.rb:770 +#: src/modules/Scanner.rb:770 msgid "Check installed packages" msgstr "설치된 패키지 점검" -#. 2. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:772 +#. 2. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:772 msgid "Read or create the scanner database" msgstr "스캐너 데이터베이스 읽기 또는 생성" -#. 3. progress stage name of a Progress::New: -#. 5. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:774 src/modules/Scanner.rb:1988 +#. 3. progress stage name of a Progress::New: +#. 5. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:774 src/modules/Scanner.rb:1988 msgid "Determine active scanners" msgstr "활성 스캐너 확인" -#. 4. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:776 +#. 4. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:776 msgid "Determine active drivers" msgstr "활성 드라이버 확인" -#. 5. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:778 +#. 5. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:778 msgid "Detect scanners" msgstr "스캐너 감지" -#. 1. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:781 +#. 1. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:781 msgid "Checking installed packages..." msgstr "설치된 패키지 점검 중..." -#. 2. progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:783 +#. 2. progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:783 msgid "Reading or creating the scanner database..." msgstr "스캐너 데이터베이스 읽기 또는 생성 중..." -#. 3. progress step progress bar title of a Progress::New: -#. 5. progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:785 src/modules/Scanner.rb:2001 +#. 3. progress step progress bar title of a Progress::New: +#. 5. progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:785 src/modules/Scanner.rb:2001 msgid "Determining active scanners..." msgstr "활성 스캐너 확인 중..." -#. 4. progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:787 +#. 4. progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:787 msgid "Determining active drivers..." msgstr "활성 드라이버 확인 중..." -#. 5. progress step progress bar title of a Progress::New: -#. Busy message: -#. Body of a Popup::ShowFeedback: -#. Busy message: -#. Body of a Popup::ShowFeedback: -#: src/modules/Scanner.rb:789 src/modules/Scanner.rb:1001 -#: src/modules/Scanner.rb:1070 +#. 5. progress step progress bar title of a Progress::New: +#. Busy message: +#. Body of a Popup::ShowFeedback: +#. Busy message: +#. Body of a Popup::ShowFeedback: +#: src/modules/Scanner.rb:789 src/modules/Scanner.rb:1001 +#: src/modules/Scanner.rb:1070 msgid "Detecting scanners..." msgstr "스캐너 감지 중..." -#. Last progress step progress bar title of a Progress::New: -#. Last progress step progress bar title of a Progress::New: -#. Last progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:791 src/modules/Scanner.rb:1030 -#: src/modules/Scanner.rb:2003 +#. Last progress step progress bar title of a Progress::New: +#. Last progress step progress bar title of a Progress::New: +#. Last progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:791 src/modules/Scanner.rb:1030 +#: src/modules/Scanner.rb:2003 msgid "Finished" msgstr "완료됨" -#. Progress 2. stage (Read or create the scanner database): -#: src/modules/Scanner.rb:859 +#. Progress 2. stage (Read or create the scanner database): +#: src/modules/Scanner.rb:859 msgid "Creating scanner database..." msgstr "스캐너 데이터베이스 생성 중..." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Scanner.rb:893 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Scanner.rb:893 msgid "Aborting: Failed to create the scanner database." msgstr "중단: 스캐너 데이터베이스 생성에 실패했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#: src/modules/Scanner.rb:933 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#: src/modules/Scanner.rb:933 msgid "Aborting: Failed to read %1." msgstr "중단: %1 파일 읽기에 실패했습니다." -#. Write scanner settings: -#. - Save the actual environment -#. @return true on success -#: src/modules/Scanner.rb:1023 +#. Write scanner settings: +#. - Save the actual environment +#. @return true on success +#: src/modules/Scanner.rb:1023 msgid "Writing Scanner Configuration" msgstr "스캐너 구성 쓰기" -#: src/modules/Scanner.rb:1026 +#: src/modules/Scanner.rb:1026 msgid "Save the actual environment" msgstr "실제 환경 저장" -#. 1. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:1028 +#. 1. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:1028 msgid "Saving the actual environment..." msgstr "실제 환경 저장 중..." -#. Message of a Popup::Error when hp-setup should be run. -#. Do not change or translate "ptal", it is a service name. -#. Do not change or translate "hp-setup", it is a program name. -#. Do not change or translate "HPLIP", it is a subsystem name. -#: src/modules/Scanner.rb:1088 +#. Message of a Popup::Error when hp-setup should be run. +#. Do not change or translate "ptal", it is a service name. +#. Do not change or translate "hp-setup", it is a program name. +#. Do not change or translate "HPLIP", it is a subsystem name. +#: src/modules/Scanner.rb:1088 msgid "" "There is at least one printer configuration that uses the ptal service.\n" "It is possible to proceed but then the running ptal service could prevent\n" @@ -1304,9 +1233,9 @@ "ptal 서비스를 중지한 후 프린터 구성을 변경한 다음\n" "스캐너 구성을 다시 시작하는 것이 좋습니다.\n" -#. Message of a Popup::Error when hp-setup should be run. -#. Do not change or translate "hp-setup", it is a program name: -#: src/modules/Scanner.rb:1099 +#. Message of a Popup::Error when hp-setup should be run. +#. Do not change or translate "hp-setup", it is a program name: +#: src/modules/Scanner.rb:1099 msgid "" "Cannot run hp-setup because no graphical display can be opened. \n" "This happens if YaST runs in text-only mode, or the user who runs YaST \n" @@ -1316,17 +1245,16 @@ "again afterwards.\n" msgstr "" "그래픽 표시를 열 수 없으므로 hp-setup을 실행할 수 없습니다. \n" -"이 문제는 YaST가 텍스트 전용 모드에서 실행되거나 YaST를 실행하는 사용자에" -"게 \n" +"이 문제는 YaST가 텍스트 전용 모드에서 실행되거나 YaST를 실행하는 사용자에게 \n" "DISPLAY 환경 변수가 설정되지 않은 경우 또는 YaST 프로세스에서 \n" "그래픽 표시에 액세스할 수 없는 경우에 발생합니다. 이 경우 스캐너 \n" "구성을 중단하고 수동으로 hp-setup을 실행한 후 스캐너 구성을\n" "다시 시작하십시오.\n" -#. Message of a Popup::YesNo when hplip should be installed. -#. Do not change or translate "hp-setup", it is a program name. -#. Do not change or translate "hplip", it is a package name: -#: src/modules/Scanner.rb:1111 +#. Message of a Popup::YesNo when hplip should be installed. +#. Do not change or translate "hp-setup", it is a program name. +#. Do not change or translate "hplip", it is a package name: +#: src/modules/Scanner.rb:1111 msgid "" "It seems hplip is not installed, which is required to run hp-setup.\n" "Should the hplip package be installed?\n" @@ -1334,9 +1262,9 @@ "hp-setup을 실행하는 데 필요한 hplip가 설치되어 있지 않은 것 같습니다.\n" "hplip 패키지를 설치해야 합니까?\n" -#. Message of a Popup::Error when hp-setup should be run. -#. Do not change or translate "hp-setup", it is a program name: -#: src/modules/Scanner.rb:1117 +#. Message of a Popup::Error when hp-setup should be run. +#. Do not change or translate "hp-setup", it is a program name: +#: src/modules/Scanner.rb:1117 msgid "" "Cannot run hp-setup because\n" "/usr/bin/hp-setup is not executable\n" @@ -1346,182 +1274,175 @@ "이 항목이 존재하지 않으므로 hp-setup을\n" "실행할 수 없습니다.\n" -#. Body of a Popup::ShowFeedback. -#. Do not change or translate "hp-setup", it is a program name: -#: src/modules/Scanner.rb:1125 +#. Body of a Popup::ShowFeedback. +#. Do not change or translate "hp-setup", it is a program name: +#: src/modules/Scanner.rb:1125 msgid "" "Launched hp-setup.\n" -"You must finish hp-setup before you can proceed with the scanner " -"configuration.\n" +"You must finish hp-setup before you can proceed with the scanner configuration.\n" msgstr "" "hp-setup을 실행했습니다.\n" "스캐너 구성을 계속하려면 먼저 hp-setup을 완료해야 합니다.\n" -#. where autodetected scanners are listed in the second column -#. to denote those scanners which are not configured yet: -#: src/modules/Scanner.rb:1296 +#. where autodetected scanners are listed in the second column +#. to denote those scanners which are not configured yet: +#: src/modules/Scanner.rb:1296 msgid "Not Configured:" msgstr "구성되지 않음:" -#. Fallback device name if the real device name is missing: -#. Fallback device name if the real device name is missing: -#: src/modules/Scanner.rb:1326 src/modules/Scanner.rb:2242 +#. Fallback device name if the real device name is missing: +#. Fallback device name if the real device name is missing: +#: src/modules/Scanner.rb:1326 src/modules/Scanner.rb:2242 msgid "Unknown device" msgstr "알수 없는 장치" -#. Fallback manufacturer name if the real manufacturer name is missing: -#. Fallback manufacturer name if the real manufacturer name is missing: -#: src/modules/Scanner.rb:1332 src/modules/Scanner.rb:2230 +#. Fallback manufacturer name if the real manufacturer name is missing: +#. Fallback manufacturer name if the real manufacturer name is missing: +#: src/modules/Scanner.rb:1332 src/modules/Scanner.rb:2230 msgid "Unknown manufacturer" msgstr "알 수 없는 제조업체" -#. Fallback model name if the real model name is missing: -#. Fallback model name if the real model name is missing: -#: src/modules/Scanner.rb:1335 src/modules/Scanner.rb:2236 +#. Fallback model name if the real model name is missing: +#. Fallback model name if the real model name is missing: +#: src/modules/Scanner.rb:1335 src/modules/Scanner.rb:2236 msgid "Unknown model" msgstr "알 수 없는 모델" -#. %1 will be replaced by the manufacturer name -#. %2 will be replaced by the model name -#. %3 will be replaced by the device name -#. where the scanner is connected to: -#. %1 will be replaced by the manufacturer name -#. %2 will be replaced by the model name -#. %3 will be replaced by the device name where the scanner is connected to: -#: src/modules/Scanner.rb:1360 src/modules/Scanner.rb:2225 +#. %1 will be replaced by the manufacturer name +#. %2 will be replaced by the model name +#. %3 will be replaced by the device name +#. where the scanner is connected to: +#. %1 will be replaced by the manufacturer name +#. %2 will be replaced by the model name +#. %3 will be replaced by the device name where the scanner is connected to: +#: src/modules/Scanner.rb:1360 src/modules/Scanner.rb:2225 msgid "%1 %2 at %3" msgstr "%1 %2 연결 위치: %3" -#. A suffix for the second column of a table -#. where active scanner drivers are listed in the first column -#. to denote those drivers for which there is no matching active scanner: -#: src/modules/Scanner.rb:1402 +#. A suffix for the second column of a table +#. where active scanner drivers are listed in the first column +#. to denote those drivers for which there is no matching active scanner: +#: src/modules/Scanner.rb:1402 msgid "No scanner recognized by this driver" msgstr "이 드라이버에서 인식하는 스캐너 없음" -#. A fallback list entry so that there is no empty list shown to the user -#. when neither a scanner was autodetected -#. nor an active scanner was found -#. nor an active driver was found: -#: src/modules/Scanner.rb:1426 +#. A fallback list entry so that there is no empty list shown to the user +#. when neither a scanner was autodetected +#. nor an active scanner was found +#. nor an active driver was found: +#: src/modules/Scanner.rb:1426 msgid "No scanner was detected and no active scanner or driver exists." msgstr "검색된 스캐너가 없으며 활성 스캐너 또는 드라이버도 존재하지 않습니다." -#. Scanner model list firmware entry for models which require a firmware upload: -#: src/modules/Scanner.rb:1455 +#. Scanner model list firmware entry for models which require a firmware upload: +#: src/modules/Scanner.rb:1455 msgid "Firmware upload required." msgstr "펌웨어 업로드가 필요합니다." -#. Scanner model list entry for models which require -#. the third-party Image Scan (IScan) driver software from Epson/Avasys. -#. Do not change or translate "Image Scan", it is a driver software name. -#. Do not change or translate "Avasys", it is a manufacturer name. -#. Do not change or translate "Epson", it is a manufacturer name. -#: src/modules/Scanner.rb:1461 +#. Scanner model list entry for models which require +#. the third-party Image Scan (IScan) driver software from Epson/Avasys. +#. Do not change or translate "Image Scan", it is a driver software name. +#. Do not change or translate "Avasys", it is a manufacturer name. +#. Do not change or translate "Epson", it is a manufacturer name. +#: src/modules/Scanner.rb:1461 msgid "Third-party Image Scan driver software from Epson/Avasys required." msgstr "Epson/Avasys의 타사 이미지 스캔 드라이버 소프트웨어가 필요합니다." -#. %1 will be replaced by the RPM package name -#. which provides the driver for the particular model: -#: src/modules/Scanner.rb:1527 +#. %1 will be replaced by the RPM package name +#. which provides the driver for the particular model: +#: src/modules/Scanner.rb:1527 msgid "Package %1" msgstr "%1 패키지" -#. but where the backend (scanner driver) is unmaintained: -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1548 +#. but where the backend (scanner driver) is unmaintained: +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1548 msgid "Unmaintained driver %1 may provide good functionality." msgstr "유지 관리되지 않는 드라이버 %1에서 유용한 기능을 제공할 수 있습니다." -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1554 +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1554 msgid "Driver %1 should provide good functionality." msgstr "%1 드라이버에서 유용한 기능을 제공해야 합니다." -#. Scanner model list status entry for "good" supported models: -#: src/modules/Scanner.rb:1561 +#. Scanner model list status entry for "good" supported models: +#: src/modules/Scanner.rb:1561 msgid "This scanner is not supported." msgstr "이 스캐너는 지원되지 않습니다." -#. which are listed as "unsupported" for a particular driver: -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1566 +#. which are listed as "unsupported" for a particular driver: +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1566 msgid "This scanner is not supported by the driver %1." msgstr "이 스캐너는 %1 드라이버에서 지원되지 않습니다." -#. but where the backend (scanner driver) is unmaintained: -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1576 +#. but where the backend (scanner driver) is unmaintained: +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1576 msgid "Unmaintained driver %1 may provide complete functionality." msgstr "유지 관리되지 않는 드라이버 %1에서 전체 기능을 제공할 수도 있습니다." -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1584 +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1584 msgid "Driver %1 should provide complete functionality." msgstr "%1 드라이버에서 전체 기능을 제공해야 합니다." -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1592 +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1592 msgid "Driver %1 may work, but was not tested." msgstr "%1 드라이버가 작동할 수도 있지만 테스트되지 않았습니다." -#. but where the backend (scanner driver) is unmaintained: -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1601 +#. but where the backend (scanner driver) is unmaintained: +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1601 msgid "Unmaintained driver %1 may provide basic functionality." msgstr "유지 관리되지 않는 드라이버 %1에서 기본 기능을 제공할 수도 있습니다." -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1609 +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1609 msgid "Driver %1 should provide basic functionality." msgstr "%1 드라이버에서 기본 기능을 제공해야 합니다." -#. but where the backend (scanner driver) is unmaintained: -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1619 +#. but where the backend (scanner driver) is unmaintained: +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1619 msgid "Unmaintained driver %1 may provide minimal functionality." msgstr "유지 관리되지 않는 드라이버 %1에서 최소 기능을 제공할 수도 있습니다." -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1627 +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1627 msgid "Driver %1 should provide minimal functionality." msgstr "%1 드라이버에서 최소 기능을 제공해야 합니다." -#. which are listed but without a known support status: -#. %1 will be replaced by the backend (scanner driver) name -#: src/modules/Scanner.rb:1635 +#. which are listed but without a known support status: +#. %1 will be replaced by the backend (scanner driver) name +#: src/modules/Scanner.rb:1635 msgid "Driver %1 may work, but the functionality is unknown." msgstr "%1 드라이버가 작동할 수도 있지만 기능을 알 수 없습니다." -#. The body of a Popup::AnyMessage for scanners which require a firmware upload -#. Below this message on a seperated line a special command will be shown. -#. The "somewhere" is important because normally the firmware file is not simply -#. stored on the manufacturer's CD but often it is buried in a weird Windows-only -#. driver archive format. The text must indicate this. -#. Do not change or translate "SANE", it is a project name. -#: src/modules/Scanner.rb:1886 +#. The body of a Popup::AnyMessage for scanners which require a firmware upload +#. Below this message on a seperated line a special command will be shown. +#. The "somewhere" is important because normally the firmware file is not simply +#. stored on the manufacturer's CD but often it is buried in a weird Windows-only +#. driver archive format. The text must indicate this. +#. Do not change or translate "SANE", it is a project name. +#: src/modules/Scanner.rb:1886 msgid "" -"A firmware file contains software that must be uploaded to the scanner's " -"memory.\n" +"A firmware file contains software that must be uploaded to the scanner's memory.\n" "Without firmware, the scanner cannot work.\n" "\n" -"Because firmware is licensed by the scanner manufacturer, we cannot " -"distribute it.\n" +"Because firmware is licensed by the scanner manufacturer, we cannot distribute it.\n" "Usually the firmware file is stored somewhere on the manufacturer's CD.\n" -"Alternatively, it may be possible to download it from the manufacturer's web " -"site.\n" -"Ask the manufacturer how to get the firmware file for your particular " -"scanner.\n" +"Alternatively, it may be possible to download it from the manufacturer's web site.\n" +"Ask the manufacturer how to get the firmware file for your particular scanner.\n" "Find additional useful information on the SANE web site at\n" "http://www.sane-project.org/.\n" "\n" "After you get the firmware file, you must configure the driver manually.\n" -"The man page of the driver describes how to configure it for firmware " -"upload.\n" +"The man page of the driver describes how to configure it for firmware upload.\n" "The following command shows the man page for your driver:\n" msgstr "" -"펌웨어 파일에는 스캐너의 메모리에 업로드되어야 하는 소프트웨어가 포함되어 있" -"습니다.\n" +"펌웨어 파일에는 스캐너의 메모리에 업로드되어야 하는 소프트웨어가 포함되어 있습니다.\n" "펌웨어가 없으면 스캐너가 작동할 수 없습니다.\n" "\n" "스캐너 제조업체에서 펌웨어 사용을 허가한 경우 배포할 수 없습니다.\n" @@ -1535,10 +1456,10 @@ "드라이버의 기본 페이지에서 펌웨어 업로드를 위해 구성하는 방법을 설명합니다.\n" "다음 명령은 드라이버 매뉴얼 페이지를 보여 줍니다.\n" -#. Message of a Popup::ContinueCancel for scanners which should be set up with the hpaio driver. -#. Do not change or translate "ptal", it is a service name. -#. Do not change or translate "HPLIP", it is a subsystem name. -#: src/modules/Scanner.rb:1905 +#. Message of a Popup::ContinueCancel for scanners which should be set up with the hpaio driver. +#. Do not change or translate "ptal", it is a service name. +#. Do not change or translate "HPLIP", it is a subsystem name. +#: src/modules/Scanner.rb:1905 msgid "" "There is at least one printer configuration that uses the ptal service.\n" "It is possible to proceed but then the ptal service would be stopped\n" @@ -1550,29 +1471,26 @@ "ptal 서비스를 사용하는 모든 프린트 대기열이 더 이상 작동하지 않습니다.\n" "계속하는 경우 HPLIP를 사용하도록 프린터 구성을 변경하십시오.\n" -#. Message of a Popup::YesNo for scanners which should be set up with the hpoj driver -#. Do not change or translate "hpoj", it is a driver name. -#. Do not change or translate "PTAL", it is a subsystem name. -#. Do not change or translate "ptal", it is a service name. -#. Do not change or translate "hplip", it is a service name. -#: src/modules/Scanner.rb:1917 +#. Message of a Popup::YesNo for scanners which should be set up with the hpoj driver +#. Do not change or translate "hpoj", it is a driver name. +#. Do not change or translate "PTAL", it is a subsystem name. +#. Do not change or translate "ptal", it is a service name. +#. Do not change or translate "hplip", it is a service name. +#: src/modules/Scanner.rb:1917 msgid "" "The hpoj driver requires the PTAL system to be set up and running.\n" "In particular, the ptal service must be up and running.\n" "\n" -"Before the ptal service can be started, the PTAL system must be " -"initialized.\n" +"Before the ptal service can be started, the PTAL system must be initialized.\n" "Additionally, the ptal service should be activated for start when booting.\n" "The PTAL system and the hplip service exclude each other.\n" "Therefore a running hplip service would be stopped and deactivated\n" "before the the PTAL system is initialized, activated, and started.\n" "An automated initialization of the PTAL system is only safe for USB.\n" -"If you have a non-USB device or if the automated initialization for USB " -"fails,\n" +"If you have a non-USB device or if the automated initialization for USB fails,\n" "set up the PTAL system manually.\n" "If you have an all-in-one device (scanner+printer), note that\n" -"a running ptal service monopolizes the USB device file (e.g., /dev/usb/" -"lp0),\n" +"a running ptal service monopolizes the USB device file (e.g., /dev/usb/lp0),\n" "so the printer can no longer be addressed via the USB device file.\n" "\n" "Should the PTAL system for USB be initialized, activated, and started now?\n" @@ -1594,19 +1512,18 @@ " \n" " USB에 대한 PTAL 시스템을 지금 초기화, 활성화 및 시작하시겠습니까?\n" -#. Message of a Popup::ContinueCancel for scanners which should be set up with the hpoj driver. -#. Do not change or translate "hplip", it is a service name. -#. Do not change or translate "hpaio", it is a driver name. -#. Do not change or translate "ptal", it is a service name. -#: src/modules/Scanner.rb:1940 +#. Message of a Popup::ContinueCancel for scanners which should be set up with the hpoj driver. +#. Do not change or translate "hplip", it is a service name. +#. Do not change or translate "hpaio", it is a driver name. +#. Do not change or translate "ptal", it is a service name. +#: src/modules/Scanner.rb:1940 msgid "" "There is at least one printer configuration that uses the hplip service.\n" "It is possible to proceed but then the hplip service would be stopped\n" "and all print queues that use the hplip service would no longer work.\n" "If the scanner is also supported by the hpaio driver, do not proceed.\n" "Instead use hpaio to set up the scanner.\n" -"Alternatively proceed and change the printer configuration to use the ptal " -"service.\n" +"Alternatively proceed and change the printer configuration to use the ptal service.\n" msgstr "" "hplip 서비스를 사용하는 프린터 구성이 적어도 하나는 있습니다.\n" "작업을 계속할 수는 있지만 그럴 경우 hplip 서비스가 중지되고 이 서비스를\n" @@ -1615,105 +1532,105 @@ " 대신 hpaio를 사용하여 스캐너를 설정하십시오.\n" " 또는 ptal 서비스를 사용하여 프린터 구성을 변경하십시오.\n" -#. %1 will be replaced by the backend name -#: src/modules/Scanner.rb:1976 +#. %1 will be replaced by the backend name +#: src/modules/Scanner.rb:1976 msgid "Setting Up Driver %1" msgstr "%1 드라이버 설정" -#: src/modules/Scanner.rb:1980 +#: src/modules/Scanner.rb:1980 msgid "Check whether additional packages must be installed" msgstr "추가 패키지를 설치해야 하는지 확인" -#. 2. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:1982 +#. 2. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:1982 msgid "Check whether firmware upload is required" msgstr "펌웨어 업로드가 필요한지 확인" -#. 3. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:1984 +#. 3. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:1984 msgid "Test and set up special requirements for particular drivers" msgstr "특정 드라이버에 대한 특수 요구 사항을 테스트 및 설정" -#. 4. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:1986 +#. 4. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:1986 msgid "Activate the driver" msgstr "드라이버 활성화" -#. 1. progress stage name of a Progress::New: -#: src/modules/Scanner.rb:1991 +#. 1. progress stage name of a Progress::New: +#: src/modules/Scanner.rb:1991 msgid "Checking whether additional packages must be installed..." msgstr "추가 패키지를 설치해야 하는지 확인 중..." -#. 2. progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:1993 +#. 2. progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:1993 msgid "Checking whether firmware upload is required..." msgstr "펌웨어 업로드가 필요한지 확인 중..." -#. 3. progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:1995 +#. 3. progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:1995 msgid "Testing and setting up special requirements for particular drivers..." msgstr "특정 드라이버에 대한 특수 요구 사항을 테스트 및 설정 중..." -#. 4. progress step progress bar title of a Progress::New: -#: src/modules/Scanner.rb:1999 +#. 4. progress step progress bar title of a Progress::New: +#: src/modules/Scanner.rb:1999 msgid "Activating the driver..." msgstr "드라이버 활성화 중..." -#. the third-party Image Scan driver software from Epson/Avasys: -#: src/modules/Scanner.rb:2020 +#. the third-party Image Scan driver software from Epson/Avasys: +#: src/modules/Scanner.rb:2020 msgid "Required Package Not Installed" msgstr "필요한 패키지가 설치되지 않았습니다." -#. Body of a Popup::AnyMessage where -#. %1 will be replaced by the backend name -#. %2 will be replaced by the package name -#. Only a simple message because before there was a dialog -#. which let the user install the package so that this message is shown -#. if the user has explicitly rejected to install it. -#: src/modules/Scanner.rb:2028 +#. Body of a Popup::AnyMessage where +#. %1 will be replaced by the backend name +#. %2 will be replaced by the package name +#. Only a simple message because before there was a dialog +#. which let the user install the package so that this message is shown +#. if the user has explicitly rejected to install it. +#: src/modules/Scanner.rb:2028 msgid "The driver %1 requires the package %2." msgstr "%1 드라이버에는 %2 패키지가 필요합니다." -#. The ptal service is associated with the hpoj backend. -#. It may happen that the conflicting service hplip is in use by the printing system. -#. The hplip service is associated with the hpaoi backend. -#. Activate the backend via bash script: -#: src/modules/Scanner.rb:2034 src/modules/Scanner.rb:2075 -#: src/modules/Scanner.rb:2119 src/modules/Scanner.rb:2133 -#: src/modules/Scanner.rb:2143 +#. The ptal service is associated with the hpoj backend. +#. It may happen that the conflicting service hplip is in use by the printing system. +#. The hplip service is associated with the hpaoi backend. +#. Activate the backend via bash script: +#: src/modules/Scanner.rb:2034 src/modules/Scanner.rb:2075 +#: src/modules/Scanner.rb:2119 src/modules/Scanner.rb:2133 +#: src/modules/Scanner.rb:2143 msgid "Aborted" msgstr "중단됨" -#. Some scanners require a firmware upload to become ready to operate. -#. When building the sane package ':firmware "required"' entries have been -#. added for the respective scanners to the appropriate descriptions files. -#. See the sane.spec file of the sane package. -#. This makes only sense if a database_index was specified -#. because which scanner requires firmware upload is stored in the database -#. and additionally user confirmation must be requested. -#. Otherwise skip this section. -#: src/modules/Scanner.rb:2054 +#. Some scanners require a firmware upload to become ready to operate. +#. When building the sane package ':firmware "required"' entries have been +#. added for the respective scanners to the appropriate descriptions files. +#. See the sane.spec file of the sane package. +#. This makes only sense if a database_index was specified +#. because which scanner requires firmware upload is stored in the database +#. and additionally user confirmation must be requested. +#. Otherwise skip this section. +#: src/modules/Scanner.rb:2054 msgid "Firmware Upload Required" msgstr "펌웨어 업로드가 필요합니다." -#. Message of a Popup::Warning for scanners which should be set up with the hpoj backend. -#. Only a simple message because before there was a Popup::YesNo -#. which asked the user whether he wants to let YaST activate the ptal service -#. so that this message is shown if the user has explicitly rejected to do it. -#. Do not change or translate "ptal", it is a service name. -#: src/modules/Scanner.rb:2109 +#. Message of a Popup::Warning for scanners which should be set up with the hpoj backend. +#. Only a simple message because before there was a Popup::YesNo +#. which asked the user whether he wants to let YaST activate the ptal service +#. so that this message is shown if the user has explicitly rejected to do it. +#. Do not change or translate "ptal", it is a service name. +#: src/modules/Scanner.rb:2109 msgid "If the ptal service is not running, the scanner cannot work." msgstr "ptal 서비스가 실행되고 있지 않으면 스캐너가 작동하지 않습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not change or translate "PTAL", it is a subsystem name. -#: src/modules/Scanner.rb:2130 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not change or translate "PTAL", it is a subsystem name. +#: src/modules/Scanner.rb:2130 msgid "Failed to set up the PTAL system." msgstr "PTAL 시스템을 설정하지 못했습니다." -#. Header message for a list of scanners which will be deactivated: -#: src/modules/Scanner.rb:2217 +#. Header message for a list of scanners which will be deactivated: +#: src/modules/Scanner.rb:2217 msgid "" "The following scanners use the same driver.\n" "Therefore all those scanners will be deactivated:" @@ -1721,68 +1638,64 @@ "다음 스캐너들은 같은 드라이버를 사용합니다.\n" "따라서 이들이 모두 비활성화됩니다." -#. Only a simple message because everything is perfectly o.k. -#. but the user should get a notification -#. why the ptal service must be still active. -#. This works only if the CUPS printing system is used. -#. Do not change or translate "hpoj", it is a driver name. -#. Do not change or translate "ptal", it is a service name. -#. Do not change or translate "CUPS", it is a subsystem name. -#: src/modules/Scanner.rb:2285 -msgid "" -"The driver hpoj is deactivated but the associated service ptal is not " -"deactivated because it is needed by the CUPS printing system." -msgstr "" -"hpoj 드라이버는 비활성화되지만, 연관된 서비스 ptal은 CUPS 프린팅 시스템에 필" -"요하므로 비활성화되지 않습니다." +#. Only a simple message because everything is perfectly o.k. +#. but the user should get a notification +#. why the ptal service must be still active. +#. This works only if the CUPS printing system is used. +#. Do not change or translate "hpoj", it is a driver name. +#. Do not change or translate "ptal", it is a service name. +#. Do not change or translate "CUPS", it is a subsystem name. +#: src/modules/Scanner.rb:2285 +msgid "The driver hpoj is deactivated but the associated service ptal is not deactivated because it is needed by the CUPS printing system." +msgstr "hpoj 드라이버는 비활성화되지만, 연관된 서비스 ptal은 CUPS 프린팅 시스템에 필요하므로 비활성화되지 않습니다." -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not change or translate "ptal", it is a service name. -#: src/modules/Scanner.rb:2300 +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not change or translate "ptal", it is a service name. +#: src/modules/Scanner.rb:2300 msgid "Failed to stop the ptal service." msgstr "ptal 서비스 중지에 실패했습니다." -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not change or translate "ptal", it is a service name. -#: src/modules/Scanner.rb:2311 +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not change or translate "ptal", it is a service name. +#: src/modules/Scanner.rb:2311 msgid "Failed to disable the ptal service." msgstr "ptal 서비스 비활성화에 실패했습니다." -#. If there is no active scanner for the backend -#. then show a message but exit successfully because -#. it is no error when there is no active scanner for the backend: -#: src/modules/Scanner.rb:2370 +#. If there is no active scanner for the backend +#. then show a message but exit successfully because +#. it is no error when there is no active scanner for the backend: +#: src/modules/Scanner.rb:2370 msgid "No Scanner for %1" msgstr "%1에 대한 스캐너 없음" -#. Header of a Popup::AnyMessage where %1 will be replaced by the driver name: -#. Body of a Popup::AnyMessage: -#: src/modules/Scanner.rb:2372 +#. Header of a Popup::AnyMessage where %1 will be replaced by the driver name: +#. Body of a Popup::AnyMessage: +#: src/modules/Scanner.rb:2372 msgid "It is not possible to test without a matching active scanner." msgstr "일치하는 활성 스캐너가 없으면 테스트할 수 없습니다." -#. Header of a SelectionBox with a list of scanners: -#: src/modules/Scanner.rb:2387 +#. Header of a SelectionBox with a list of scanners: +#: src/modules/Scanner.rb:2387 msgid "&Scanner to Test" msgstr "테스트할 스캐너(&S)" -#. Test the device: -#: src/modules/Scanner.rb:2409 +#. Test the device: +#: src/modules/Scanner.rb:2409 msgid "Testing %1" msgstr "%1 테스트 중" -#. Header of a Popup::ShowFeedback where %1 will be replaced by the driver name: -#. Body of a Popup::ShowFeedback where %1 will be replaced by the SANE device identifier. -#. Do not change or translate "scanimage -d %1 -v", it is a fixed command. -#: src/modules/Scanner.rb:2412 +#. Header of a Popup::ShowFeedback where %1 will be replaced by the driver name: +#. Body of a Popup::ShowFeedback where %1 will be replaced by the SANE device identifier. +#. Do not change or translate "scanimage -d %1 -v", it is a fixed command. +#: src/modules/Scanner.rb:2412 msgid "Testing with 'scanimage -d %1 -v'..." msgstr "'scanimage -d %1 -v'로 테스트 중..." -#. %1 will be replaced by the SANE device identifier -#. %2 will be replaced by the actual test results -#. which are usually only available in English. -#. Do not change or translate "scanimage -d %1 -v", it is a fixed command. -#: src/modules/Scanner.rb:2424 +#. %1 will be replaced by the SANE device identifier +#. %2 will be replaced by the actual test results +#. which are usually only available in English. +#. Do not change or translate "scanimage -d %1 -v", it is a fixed command. +#: src/modules/Scanner.rb:2424 msgid "" "Test with 'scanimage -d %1 -v' failed.\n" "The results are:\n" @@ -1794,27 +1707,27 @@ "\n" "%2" -#. Fallback message if the real results are missing: -#. Fallback message if the real results are missing: -#: src/modules/Scanner.rb:2435 src/modules/Scanner.rb:2467 +#. Fallback message if the real results are missing: +#. Fallback message if the real results are missing: +#: src/modules/Scanner.rb:2435 src/modules/Scanner.rb:2467 msgid "(no results available)" msgstr "(사용 가능한 결과 없음)" -#. If the test failed, do the whole autodetection anew. -#. Even if normally nothing should have changed because of a failed test, -#. it might have happened that for example during the test somehow -#. the scanner had fallen into coma or the USB or SCSI system had crashed -#. and then the scanner would be no longer an active scanner nor could it be autodetected. -#. To simulate such an event, simply unplug an USB scanner while it is being tested. -#: src/modules/Scanner.rb:2450 +#. If the test failed, do the whole autodetection anew. +#. Even if normally nothing should have changed because of a failed test, +#. it might have happened that for example during the test somehow +#. the scanner had fallen into coma or the USB or SCSI system had crashed +#. and then the scanner would be no longer an active scanner nor could it be autodetected. +#. To simulate such an event, simply unplug an USB scanner while it is being tested. +#: src/modules/Scanner.rb:2450 msgid "Successfully Tested %1" msgstr "%1을(를) 성공적으로 테스트함" -#. %1 will be replaced by the SANE device identifier -#. %2 will be replaced by the actual test results -#. which are usually only available in English. -#. Do not change or translate "scanimage -d %1 -v", it is a fixed command. -#: src/modules/Scanner.rb:2456 +#. %1 will be replaced by the SANE device identifier +#. %2 will be replaced by the actual test results +#. which are usually only available in English. +#. Do not change or translate "scanimage -d %1 -v", it is a fixed command. +#: src/modules/Scanner.rb:2456 msgid "" "Test with 'scanimage -d %1 -v' succeeded.\n" "The results are:\n" @@ -1826,39 +1739,38 @@ "\n" "%2" -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no scanning via network was configured. -#. The latter results no error. -#: src/modules/Scanner.rb:2486 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no scanning via network was configured. +#. The latter results no error. +#: src/modules/Scanner.rb:2486 msgid "Failed to determine the configuration for scanning via network." msgstr "네트워크를 통한 스캔과 관련된 구성을 확인하는 데 실패했습니다." -#. Only a simple message because this error does not happen on a normal system -#. (i.e. a system which is not totally broken or totally messed up). -#. Do not confuse this error with the case when no scanning via network is to be set up. -#. The latter results no error. -#: src/modules/Scanner.rb:2562 +#. Only a simple message because this error does not happen on a normal system +#. (i.e. a system which is not totally broken or totally messed up). +#. Do not confuse this error with the case when no scanning via network is to be set up. +#. The latter results no error. +#: src/modules/Scanner.rb:2562 msgid "Failed to set up scanning via network." msgstr "네트워크를 통한 스캔을 설정하는 데 실패했습니다." -#. Determine if any kind of firewall seems to be active by calling -#. "iptables -n -L | egrep -q 'DROP|REJECT'" -#. to find out if there are currently dropping or rejecting packet filter rules. -#. One might use a more specific test via -#. "iptables -n -L | grep -v '^LOG' | egrep -q '^DROP|^REJECT'" -#. to match only for DROP and REJECT targets and exclude LOG targets -#. but it does not cause real problems when there is a false positive result here -#. because all what happens it that then a needless firewall info popup would be shown. -#. If any kind of firewall seems to be active, show a popup message -#. regarding scanning via network and firewall. -#. @return true if any kind of firewall seems to be active -#: src/modules/Scanner.rb:2590 +#. Determine if any kind of firewall seems to be active by calling +#. "iptables -n -L | egrep -q 'DROP|REJECT'" +#. to find out if there are currently dropping or rejecting packet filter rules. +#. One might use a more specific test via +#. "iptables -n -L | grep -v '^LOG' | egrep -q '^DROP|^REJECT'" +#. to match only for DROP and REJECT targets and exclude LOG targets +#. but it does not cause real problems when there is a false positive result here +#. because all what happens it that then a needless firewall info popup would be shown. +#. If any kind of firewall seems to be active, show a popup message +#. regarding scanning via network and firewall. +#. @return true if any kind of firewall seems to be active +#: src/modules/Scanner.rb:2590 msgid "Check that your firewall allows scanning via network." msgstr "방화벽에서 네트워크를 통한 스캔을 허용하는지 확인하십시오." -#. Popup::MessageDetails information regarding details: -#: src/modules/Scanner.rb:2592 +#. Popup::MessageDetails information regarding details: +#: src/modules/Scanner.rb:2592 msgid "For details regarding firewall see the help text of this dialog." -msgstr "" -"방화벽에 대한 자세한 내용은 이 대화 상자의 도움말 텍스트를 참조하십시오." +msgstr "방화벽에 대한 자세한 내용은 이 대화 상자의 도움말 텍스트를 참조하십시오." Modified: branches/SLE12-SP3/yast/ko/po/security.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/security.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/security.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,295 +14,294 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. translators: command line help text for Security module -#: src/clients/security.rb:59 +#. translators: command line help text for Security module +#: src/clients/security.rb:59 msgid "Security configuration module" msgstr "보안 구성 모듈" -#. command line help text for 'summary' action -#: src/clients/security.rb:72 +#. command line help text for 'summary' action +#: src/clients/security.rb:72 msgid "View summary of current configuration" msgstr "현재 구성 요약 보기" -#. command line help text for 'level' action -#: src/clients/security.rb:79 +#. command line help text for 'level' action +#: src/clients/security.rb:79 msgid "Set the security level" msgstr "보안 레벨 설정" -#. command line help text for 'set' action -#: src/clients/security.rb:86 +#. command line help text for 'set' action +#: src/clients/security.rb:86 msgid "Set the value of the specific option" msgstr "지정한 옵션 값 설정" -#. command line help text for 'level workstation' option -#: src/clients/security.rb:94 +#. command line help text for 'level workstation' option +#: src/clients/security.rb:94 msgid "Workstation security level" msgstr "워크스테이션 보안 수준" -#. command line help text for 'level roaming' option -#: src/clients/security.rb:100 +#. command line help text for 'level roaming' option +#: src/clients/security.rb:100 msgid "Roaming Device (e.g. laptop or tablet) security level" msgstr "로밍 장치(예: 랩톱 및 태블릿) 보안 수준" -#. command line help text for 'level server' option -#: src/clients/security.rb:106 +#. command line help text for 'level server' option +#: src/clients/security.rb:106 msgid "Network Server security level" msgstr "네트워크 서버 보안 레벨" -#. command line help text for 'set passwd' option -#: src/clients/security.rb:112 +#. command line help text for 'set passwd' option +#: src/clients/security.rb:112 msgid "Password encryption method" msgstr "비밀번호 암호화 방법" -#. command line help text for 'set crack' option -#: src/clients/security.rb:120 +#. command line help text for 'set crack' option +#: src/clients/security.rb:120 msgid "Check new passwords" msgstr "새 비밀번호 확인" -#. command line help text for 'set permissions' option -#: src/clients/security.rb:128 +#. command line help text for 'set permissions' option +#: src/clients/security.rb:128 msgid "Set file permissions to desired type" msgstr "원하는 유형으로 파일 권한 설정" -#. command line help text for 'set remember' option -#: src/clients/security.rb:136 +#. command line help text for 'set remember' option +#: src/clients/security.rb:136 msgid "Set the number of remembered user passwords" msgstr "기억할 사용자 비밀번호 수 설정" -#. error message -#: src/clients/security.rb:250 +#. error message +#: src/clients/security.rb:250 msgid "The number of passwords to remember must be between 0 an 400." msgstr "기억할 비밀번호 수는 0에서 400 사이여야 합니다." -#. Main dialog caption -#: src/include/security/complex.rb:58 +#. Main dialog caption +#: src/include/security/complex.rb:58 msgid "Local Security Configuration" msgstr "로컬 보안 설정" -#. RadioButton label -#: src/include/security/complex.rb:93 +#. RadioButton label +#: src/include/security/complex.rb:93 msgid "&Custom Settings" msgstr "사용자 설정(&C)" -#. Frame caption -#: src/include/security/complex.rb:107 +#. Frame caption +#: src/include/security/complex.rb:107 msgid "Security Settings" msgstr "보안 설정" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/security/dialogs.ycp -#. Package: Security configuration -#. Summary: Dialogs definitions -#. Authors: Michal Svec -#. -#. $Id$ -#: src/include/security/dialogs.rb:64 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/security/dialogs.ycp +#. Package: Security configuration +#. Summary: Dialogs definitions +#. Authors: Michal Svec +#. +#. $Id$ +#: src/include/security/dialogs.rb:64 msgid "Unknown" msgstr "알 수 없음" -#: src/include/security/dialogs.rb:67 +#: src/include/security/dialogs.rb:67 msgid "Use magic SysRq keys" msgstr "Magic SysRq 키 사용" -#: src/include/security/dialogs.rb:68 +#: src/include/security/dialogs.rb:68 msgid "Use secure file permissions" msgstr "보안 파일 권한 사용" -#: src/include/security/dialogs.rb:71 +#: src/include/security/dialogs.rb:71 msgid "Remote access to the display manager" msgstr "디스플레이 관리자에 대한 원격 액세스" -#: src/include/security/dialogs.rb:74 +#: src/include/security/dialogs.rb:74 msgid "Write back system time to the hardware clock" msgstr "하드웨어 시계까지 시스템 시간 기록" -#: src/include/security/dialogs.rb:77 +#: src/include/security/dialogs.rb:77 msgid "Always generate syslog message for cron scripts" msgstr "항상 cron 스크립트에 대한 syslog 메시지 생성" -#: src/include/security/dialogs.rb:80 +#: src/include/security/dialogs.rb:80 msgid "Run the DHCP daemon in a chroot" msgstr "chroot에서 DHCP 데몬 실행 " -#: src/include/security/dialogs.rb:83 +#: src/include/security/dialogs.rb:83 msgid "Run the DHCP daemon as dhcp user" msgstr "dhcp 사용자로 DHCP 데몬 실행" -#: src/include/security/dialogs.rb:86 +#: src/include/security/dialogs.rb:86 msgid "Remote root login in the display manager" msgstr "디스플레이 관리자의 원격 루트 로그인" -#: src/include/security/dialogs.rb:89 +#: src/include/security/dialogs.rb:89 msgid "Remote access to the X server" msgstr "X 서버에 대한 원격 액세스" -#: src/include/security/dialogs.rb:92 +#: src/include/security/dialogs.rb:92 msgid "Remote access to the email delivery subsystem" msgstr "전자 메일 전달 하위 시스템에 대한 원격 액세스" -#: src/include/security/dialogs.rb:95 +#: src/include/security/dialogs.rb:95 msgid "Restart services on update" msgstr "업데이트 시 서비스 다시 시작" -#: src/include/security/dialogs.rb:98 +#: src/include/security/dialogs.rb:98 msgid "Stop services on removal" msgstr "제거 시 서비스 중지" -#: src/include/security/dialogs.rb:101 +#: src/include/security/dialogs.rb:101 msgid "Enable TCP syncookies" msgstr "TCP syncookies 활성화" -#: src/include/security/dialogs.rb:104 +#: src/include/security/dialogs.rb:104 msgid "IPv4 forwarding" msgstr "IPv4 전달" -#: src/include/security/dialogs.rb:105 +#: src/include/security/dialogs.rb:105 msgid "IPv6 forwarding" msgstr "IPv6 전달" -#: src/include/security/dialogs.rb:106 +#: src/include/security/dialogs.rb:106 msgid "Enable basic system services" msgstr "기본 시스템 서비스 활성화" -#: src/include/security/dialogs.rb:109 +#: src/include/security/dialogs.rb:109 msgid "Disable extra services" msgstr "추가 서비스 비활성화" -#. handle the special cases at first -#: src/include/security/dialogs.rb:152 +#. handle the special cases at first +#: src/include/security/dialogs.rb:152 msgid "Configure" msgstr "구성" -#: src/include/security/dialogs.rb:154 +#: src/include/security/dialogs.rb:154 msgid "Enabled" msgstr "활성화" -#: src/include/security/dialogs.rb:156 +#: src/include/security/dialogs.rb:156 msgid "Disabled" msgstr "비활성화" -#. table header -#. table header -#: src/include/security/dialogs.rb:182 src/include/security/dialogs.rb:411 +#. table header +#. table header +#: src/include/security/dialogs.rb:182 src/include/security/dialogs.rb:411 msgid "Security Setting" msgstr "보안 설정" -#: src/include/security/dialogs.rb:183 src/include/security/dialogs.rb:412 +#: src/include/security/dialogs.rb:183 src/include/security/dialogs.rb:412 msgid "Status" msgstr "상태" -#: src/include/security/dialogs.rb:184 src/include/security/dialogs.rb:413 +#: src/include/security/dialogs.rb:184 src/include/security/dialogs.rb:413 msgid "Security Status" msgstr "보안 상태" -#. add one line for each security setting -#: src/include/security/dialogs.rb:320 +#. add one line for each security setting +#: src/include/security/dialogs.rb:320 msgid "Help" msgstr "도움말" -#. this is a separator between service names -#. e.g.: "postfix" + " or " + "sendmail" -#: src/include/security/dialogs.rb:363 +#. this is a separator between service names +#. e.g.: "postfix" + " or " + "sendmail" +#: src/include/security/dialogs.rb:363 msgid " or " msgstr " 또는" -#. richtext message: %1 = runlevel ("3" or "5"), %2 = list of services -#: src/include/security/dialogs.rb:370 +#. richtext message: %1 = runlevel ("3" or "5"), %2 = list of services +#: src/include/security/dialogs.rb:370 msgid "<P>These basic system services are not enabled:<BR><B>%s</B></P>" msgstr "<P>다음 기본 시스템 서비스가 활성화되지 않음:<BR><B>%s</B></P>" -#: src/include/security/dialogs.rb:372 +#: src/include/security/dialogs.rb:372 msgid "<P>All basic services are enabled.</P>" msgstr "<P>모든 기본 서비스가 활성화됩니다.</P>" -#: src/include/security/dialogs.rb:380 +#: src/include/security/dialogs.rb:380 msgid "<P>These extra services are enabled:<BR><B>%s</B></P>" msgstr "<P>다음 추가 서비스가 활성화됨:<BR><B>%s</B></P>" -#: src/include/security/dialogs.rb:381 +#: src/include/security/dialogs.rb:381 msgid "<P>Check the list of services and disable all unused services.</P>" -msgstr "" -"<P>서비스 목록을 확인하고 사용하지 않는 모든 서비스를 비활성화합니다.</P>" +msgstr "<P>서비스 목록을 확인하고 사용하지 않는 모든 서비스를 비활성화합니다.</P>" -#: src/include/security/dialogs.rb:383 +#: src/include/security/dialogs.rb:383 msgid "<P>Only basic system services are enabled.</P>" msgstr "<P>기본 시스템 서비스만 활성화됩니다.</P>" -#: src/include/security/dialogs.rb:389 +#: src/include/security/dialogs.rb:389 msgid "Description" msgstr "설명" -#. Overview dialog caption -#. params: input tree, parent, label, id -#: src/include/security/dialogs.rb:401 src/include/security/wizards.rb:49 +#. Overview dialog caption +#. params: input tree, parent, label, id +#: src/include/security/dialogs.rb:401 src/include/security/wizards.rb:49 msgid "Security Overview" msgstr "보안 개요" -#. push button label -#: src/include/security/dialogs.rb:426 +#. push button label +#: src/include/security/dialogs.rb:426 msgid "Change &Status" msgstr "상태 변경(&S)" -#. push button label -#: src/include/security/dialogs.rb:429 +#. push button label +#: src/include/security/dialogs.rb:429 msgid "&Description" msgstr "설명(&D)" -#. update the current value -#: src/include/security/dialogs.rb:523 +#. update the current value +#: src/include/security/dialogs.rb:523 msgid "Analyzing system" msgstr "시스템 분석 중" -#. Boot dialog caption -#: src/include/security/dialogs.rb:589 src/include/security/wizards.rb:57 +#. Boot dialog caption +#: src/include/security/dialogs.rb:589 src/include/security/wizards.rb:57 msgid "Boot Settings" msgstr "부트 설정" -#. Frame label -#: src/include/security/dialogs.rb:601 +#. Frame label +#: src/include/security/dialogs.rb:601 msgid "Boot Permissions" msgstr "부트 권한" -#. Misc dialog caption -#: src/include/security/dialogs.rb:670 src/include/security/wizards.rb:60 +#. Misc dialog caption +#: src/include/security/dialogs.rb:670 src/include/security/wizards.rb:60 msgid "Miscellaneous Settings" msgstr "기타 설정" -#. Password dialog caption -#: src/include/security/dialogs.rb:750 src/include/security/wizards.rb:56 +#. Password dialog caption +#: src/include/security/dialogs.rb:750 src/include/security/wizards.rb:56 msgid "Password Settings" msgstr "비밀번호 설정" -#. Frame label -#: src/include/security/dialogs.rb:759 +#. Frame label +#: src/include/security/dialogs.rb:759 msgid "Checks" msgstr "확인" -#. Frame label -#: src/include/security/dialogs.rb:774 +#. Frame label +#: src/include/security/dialogs.rb:774 msgid "Password Age" msgstr "비밀번호 사용 기간" -#. Popup text -#: src/include/security/dialogs.rb:852 +#. Popup text +#: src/include/security/dialogs.rb:852 msgid "" "The minimum number of days cannot be larger\n" "than the maximum." @@ -310,8 +309,8 @@ "최소 기간 값은 최대 기간 값보다 클 수\n" "없습니다." -#. Popup text, %1 is number -#: src/include/security/dialogs.rb:869 +#. Popup text, %1 is number +#: src/include/security/dialogs.rb:869 msgid "" "The minimum password length cannot be larger than the maximum.\n" "The maximum password length for the selected encryption method is %1." @@ -319,18 +318,18 @@ "최소 비밀번호 길이는 최대 비밀번호 길이보다 길 수 없습니다.\n" "선택한 암호화 방법의 최대 비밀번호 길이는 %1입니다." -#. Login dialog caption -#: src/include/security/dialogs.rb:901 src/include/security/wizards.rb:58 +#. Login dialog caption +#: src/include/security/dialogs.rb:901 src/include/security/wizards.rb:58 msgid "Login Settings" msgstr "로그인 설정" -#. Frame label -#: src/include/security/dialogs.rb:910 +#. Frame label +#: src/include/security/dialogs.rb:910 msgid "Login" msgstr "로그인" -#. Read dialog help 1/2 -#: src/include/security/helps.rb:41 +#. Read dialog help 1/2 +#: src/include/security/helps.rb:41 msgid "" "<p><b><big>Initializing Security Configuration</big></b>\n" "<br>Please wait...<br></p>" @@ -338,8 +337,8 @@ "<p><b><big>보안 구성 초기화 중</big></b>\n" "<br>잠시 기다려 주십시오...<br></p>" -#. Read dialog help 2/2 -#: src/include/security/helps.rb:45 +#. Read dialog help 2/2 +#: src/include/security/helps.rb:45 msgid "" "<p><b><big>Aborting the Initialization</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>" @@ -347,8 +346,8 @@ "<p><b><big>초기화 중단</big></b><br>\n" "지금 <b>중단</b>을 누르면 구성 유틸리티를 안전하게 중단할 수 있습니다.</p>" -#. Write dialog help 1/2 -#: src/include/security/helps.rb:49 +#. Write dialog help 1/2 +#: src/include/security/helps.rb:49 msgid "" "<p><b><big>Saving Security Configuration</big></b>\n" "<br>Please wait...<br></p>" @@ -356,8 +355,8 @@ "<p><b><big>보안 구성 저장 중</big></b>\n" "<br>잠시 기다려 주십시오...<br></p>" -#. Write dialog help 2/2 -#: src/include/security/helps.rb:53 +#. Write dialog help 2/2 +#: src/include/security/helps.rb:53 msgid "" "<p><b><big>Aborting Saving</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.</p>" @@ -365,26 +364,23 @@ "<p><b><big>저장 중단</big></b><br>\n" "<b>중단</b>을 누르면 저장이 중단됩니다.</p>" -#. Main dialog help 1/8 -#: src/include/security/helps.rb:59 +#. Main dialog help 1/8 +#: src/include/security/helps.rb:59 msgid "" "<P><BIG><B>Configuring Local Security</B></BIG></P>\n" -"<p>Using predefined defaults, change the local security settings, which " -"include\n" -" booting, login, password, user creation, and file permissions. The " -"default\n" +"<p>Using predefined defaults, change the local security settings, which include\n" +" booting, login, password, user creation, and file permissions. The default\n" " settings can be modified as needed.\n" "</p>" msgstr "" "<P><BIG><B>로컬 보안 구성</B></BIG></P>\n" -"<p>사전 정의된 기본값을 사용하여 부팅, 로그인, 비밀번호, 사용자 생성 및 파일 " -"권한\n" +"<p>사전 정의된 기본값을 사용하여 부팅, 로그인, 비밀번호, 사용자 생성 및 파일 권한\n" " 등과 같은 로컬 보안 설정을 변경합니다. 기본 설정은\n" " 필요한 대로 수정할 수 있습니다.\n" " </p>" -#. Main dialog help 5/8 -#: src/include/security/helps.rb:67 +#. Main dialog help 5/8 +#: src/include/security/helps.rb:67 msgid "" "<p><b>Workstation</b>: For a computer connected\n" "to any type of network including the Internet.</p>" @@ -392,8 +388,8 @@ "<p><b>워크스테이션</b>: 인터넷을 포함한 모든 네트워크 유형에\n" "연결된 컴퓨터.</p>" -#. Main dialog help 6/8 -#: src/include/security/helps.rb:71 +#. Main dialog help 6/8 +#: src/include/security/helps.rb:71 msgid "" "<p><b>Roaming Device</b>: For a laptop, tablet or similar device\n" "that connects to different networks.</p>" @@ -401,8 +397,8 @@ "<p><b>로밍 장치</b>: 다른 네트워크에 연결되는\n" "랩톱, 태블릿 또는 유사한 장치.</p>" -#. Main dialog help 7/8 -#: src/include/security/helps.rb:75 +#. Main dialog help 7/8 +#: src/include/security/helps.rb:75 msgid "" "<p><b>Network Server</b>: For a computer that provides\n" "any type of service.</p>" @@ -410,13 +406,13 @@ "<p><b>네트워크 서버</b>: 어떤 유형이든 서비스를\n" "제공하는 컴퓨터용.</p>" -#. Main dialog help 8/8 -#: src/include/security/helps.rb:79 +#. Main dialog help 8/8 +#: src/include/security/helps.rb:79 msgid "<p><b>Custom Settings</b>: Create your own configuration.</p>" msgstr "<p><b>사용자 정의 설정</b>: 자체 구성을 생성합니다.</p>" -#. Login dialog help 1/4 -#: src/include/security/helps.rb:81 +#. Login dialog help 1/4 +#: src/include/security/helps.rb:81 msgid "" "<p><big><b>Login Security</b></big></p>\n" "<p>These login settings\n" @@ -426,30 +422,25 @@ "<p>이러한 로그인 설정은\n" " 주로 /etc/login.defs 파일에 저장됩니다.</p>" -#. Login dialog help 2/4 -#: src/include/security/helps.rb:87 +#. Login dialog help 2/4 +#: src/include/security/helps.rb:87 msgid "" "<p><b>Delay after Incorrect Login Attempt:</b>\n" -"It is advisable to wait some time after an incorrect login attempt to " -"prevent\n" -"password guessing. Make the time small enough that users do not need to wait " -"to\n" -"retry if a password is mistyped. A sensible value is three seconds (<tt>3).</p>" +"It is advisable to wait some time after an incorrect login attempt to prevent\n" +"password guessing. Make the time small enough that users do not need to wait to\n" +"retry if a password is mistyped. A sensible value is three seconds (<tt>3</tt>).</p>" msgstr "" "<p><b>잘못된 로그인 후에 기다리는 시간:</b>\n" "비밀번호 추측을 막기 위해 잘못된 로그인 시도 후에는 잠시 기다리는 것이\n" " 바람직합니다. 비밀번호를 잘못 입력했을 경우 사용자가 재시도를 위해 기다릴\n" -" 필요가 없도록 시간을 짧게 설정하십시오. 적절한 값은 3초(<tt>3</tt>)입니다." +" 필요가 없도록 시간을 짧게 설정하십시오. 적절한 값은 3초(<tt>3</tt>)입니다.</p>" -#. Login dialog help 3/4 -#: src/include/security/helps.rb:94 +#. Login dialog help 3/4 +#: src/include/security/helps.rb:94 msgid "" "<p><b>Record Successful Login Attempts:</b> Logging successful login\n" "attempts is useful. It can warn you of unauthorized access to the\n" -"system (for example, a user logging in from a different location than " -"usual).\n" +"system (for example, a user logging in from a different location than usual).\n" "</p>\n" msgstr "" "<p><b>성공적인 로그인 시도 기록:</b> 성공적인 로그인 시도 로깅은\n" @@ -457,22 +448,19 @@ "다른 위치에서 로그인하는 사용자)를 경고할 수 있습니다.\n" "</p>\n" -#. Login dialog help 4/4 -#: src/include/security/helps.rb:101 +#. Login dialog help 4/4 +#: src/include/security/helps.rb:101 msgid "" "<p><b>Allow Remote Graphical Login:</b> Checking this allows access\n" -"to a graphical login screen for this machine over the network. Remote " -"access\n" +"to a graphical login screen for this machine over the network. Remote access\n" "to your machine using a display manager might be a security risk.</p>" msgstr "" "<p><b>원격 그래픽 로그인 허용:</b> 이 항목을 선택하면 네트워크를\n" -"통해 이 컴퓨터에 대한 그래픽 로그인 화면에 액세스할 수 있습니다. 그러나 디스" -"플레이\n" -" 관리자를 사용하여 컴퓨터에 원격 액세스할 경우 보안상 위험이 따를 수 있습니" -"다.</p>" +"통해 이 컴퓨터에 대한 그래픽 로그인 화면에 액세스할 수 있습니다. 그러나 디스플레이\n" +" 관리자를 사용하여 컴퓨터에 원격 액세스할 경우 보안상 위험이 따를 수 있습니다.</p>" -#. Password dialog help 1/8 -#: src/include/security/helps.rb:107 +#. Password dialog help 1/8 +#: src/include/security/helps.rb:107 msgid "" "<p>These password settings\n" "are mainly stored in the /etc/login.defs file.</p>" @@ -480,26 +468,23 @@ "<p>이러한 비밀번호 설정은\n" "주로 /etc/login.defs 파일에 저장됩니다.</p>" -#. Password dialog help 2/8 -#: src/include/security/helps.rb:111 +#. Password dialog help 2/8 +#: src/include/security/helps.rb:111 msgid "" "<p><b>Check New Passwords</b>: It is wise to choose a password that\n" -"cannot be found in a dictionary and is not a name or other simple, common " -"word.\n" +"cannot be found in a dictionary and is not a name or other simple, common word.\n" "By checking the box, enforce password checking in regard to these rules.</p>" msgstr "" "<p><b>새 비밀번호 확인</b>: 비밀번호로는 사전에서 찾을 수 없는\n" -"단어를 선택하되 이름 또는 기타 단순하고 일반적인 단어는 피하는 것이 좋습니" -"다.\n" +"단어를 선택하되 이름 또는 기타 단순하고 일반적인 단어는 피하는 것이 좋습니다.\n" " 이 항목을 선택하면 이러한 규칙에 따라 비밀번호를 점검합니다.</p>" -#. Password dialog help -#: src/include/security/helps.rb:117 +#. Password dialog help +#: src/include/security/helps.rb:117 msgid "" "<p><b>Minimum Acceptable Password Length:</b>\n" "The minimum acceptable size for the new password reduced by the number\n" -"of different character classes (other, upper, lower and digit) used in the " -"new\n" +"of different character classes (other, upper, lower and digit) used in the new\n" "password. See man pam_cracklib for a more detailed explanation.\n" "This option can only be modified when <b>Check New Passwords</b> is set.</p>" msgstr "" @@ -509,57 +494,49 @@ "최소 허용 크기입니다. 자세한 설명은 man pam_cracklib를 참조하십시오.\n" "이 옵션은 <b>새 비밀번호 확인</b>이 설정된 경우에만 수정할 수 있습니다.</p>" -#. Password dialog help 4/8 -#: src/include/security/helps.rb:125 +#. Password dialog help 4/8 +#: src/include/security/helps.rb:125 msgid "" "<p><b>Passwords to Remember</b>:\n" -"Enter the number of user passwords to store and prevent the user from " -"reusing.\n" +"Enter the number of user passwords to store and prevent the user from reusing.\n" "Enter 0 if passwords should not be stored.</p>" msgstr "" "<p><b>기억할 비밀번호</b>:\n" "저장하여 사용자가 재사용하지 못하게 할 사용자 비밀번호의 수를 입력합니다.\n" " 비밀번호를 저장하지 말아야 할 경우 0을 입력하십시오.</p>" -#. Password dialog help 5a/8 -#: src/include/security/helps.rb:131 +#. Password dialog help 5a/8 +#: src/include/security/helps.rb:131 msgid "<p><b>Password Encryption Method:</b></p>" msgstr "<p><b>비밀번호 암호화 방법:</b></p>" -#. Password dialog help 5b/8 -#: src/include/security/helps.rb:133 +#. Password dialog help 5b/8 +#: src/include/security/helps.rb:133 msgid "" "<p><b>DES</b>, the Linux default method, works in all network environments,\n" -"but it restricts you to passwords no longer than eight characters. If you " -"need\n" +"but it restricts you to passwords no longer than eight characters. If you need\n" "compatibility with other systems, use this method.</p>" msgstr "" "<p>Linux 기본 메소드인 <b>DES</b>는 모든 네트워크 환경에서 작동하지만\n" "8자보다 긴 비밀번호로 제한합니다.\n" "다른 시스템과의 호환성이 필요한 경우 이 메소드를 사용하십시오.</p>" -#. Password dialog help 5c/8 -#: src/include/security/helps.rb:139 +#. Password dialog help 5c/8 +#: src/include/security/helps.rb:139 msgid "" -"<p><b>MD5</b> allows longer passwords and is supported by all current " -"Linux \n" +"<p><b>MD5</b> allows longer passwords and is supported by all current Linux \n" "distributions, but not by other systems or old software.</p>" msgstr "" -"<p><b>MD5</b>를 선택하면 더 긴 비밀번호를 사용할 수 있습니다. 현재 배포되는 " -"모든 Linux는\n" +"<p><b>MD5</b>를 선택하면 더 긴 비밀번호를 사용할 수 있습니다. 현재 배포되는 모든 Linux는\n" " MD5를 지원하지만, 다른 시스템이나 오래된 소프트웨어는 지원하지 않습니다.</p>" -#. Password dialog help 5d/8 -#: src/include/security/helps.rb:143 -msgid "" -"<p><b>SHA-512</b> is the current standard hash method, using other " -"algorithms is not recommended unless needed for compatibility purpose.</p>" -msgstr "" -"<p><b>SHA-512</b>가 현재 표준 해시 메소드입니다. 호환성 목적을 위해 필요한 경" -"우가 아니면 다른 알고리즘을 사용하지 않는 것이 좋습니다.</p>" +#. Password dialog help 5d/8 +#: src/include/security/helps.rb:143 +msgid "<p><b>SHA-512</b> is the current standard hash method, using other algorithms is not recommended unless needed for compatibility purpose.</p>" +msgstr "<p><b>SHA-512</b>가 현재 표준 해시 메소드입니다. 호환성 목적을 위해 필요한 경우가 아니면 다른 알고리즘을 사용하지 않는 것이 좋습니다.</p>" -#. Password dialog help 7/8 -#: src/include/security/helps.rb:147 +#. Password dialog help 7/8 +#: src/include/security/helps.rb:147 msgid "" "<p><b>Password Age:</b> Set the minimum and\n" "maximum number of days a password may be used.</p>" @@ -567,30 +544,28 @@ "<p><b>비밀번호 사용 기간:</b> 비밀번호를 사용할 수 있는\n" "최소 기간 및 최대 기간을 날짜 단위로 설정합니다.</p>" -#. Password dialog help 8/8 -#: src/include/security/helps.rb:151 +#. Password dialog help 8/8 +#: src/include/security/helps.rb:151 msgid "" "<p><b>Days before Password Expires Warning</b>: This entry sets the\n" -"number of days users are warned before their passwords expire. The longer " -"the\n" +"number of days users are warned before their passwords expire. The longer the\n" "time, the less likely it is that someone can guess passwords.</p>" msgstr "" "<p><b>비밀번호 만료 경고 기간</b>: 비밀번호가 만료되기\n" "전 사용자에게 경고할 기간을 설정합니다. 이 기간이 길수록\n" " 누군가가 비밀번호를 추측할 수 있는 가능성이 줄어듭니다.</p>" -#. Adduser dialog help 1/2 -#: src/include/security/helps.rb:157 +#. Adduser dialog help 1/2 +#: src/include/security/helps.rb:157 msgid "" "<p><big><b>User Security</b></big></P>\n" "<p>In this dialog, change various settings used to create users.</p>" msgstr "" "<p><b><big>사용자 보안</big></b></p>\n" -"<p>이 대화 상자에서는 사용자 생성에 사용되는 다양한 설정을 변경할 수 있습니" -"다.</p>" +"<p>이 대화 상자에서는 사용자 생성에 사용되는 다양한 설정을 변경할 수 있습니다.</p>" -#. Adduser dialog help 2/3 -#: src/include/security/helps.rb:161 +#. Adduser dialog help 2/3 +#: src/include/security/helps.rb:161 msgid "" "<p><b>User ID Limitations:</b>\n" "Set the minimum and maximum possible user ID.</p>" @@ -598,8 +573,8 @@ "<p><b>사용자 ID 제한:</b>\n" "가능한 사용자 ID의 최소값 및 최대값을 설정합니다.</p>" -#. Adduser dialog help 3/3 -#: src/include/security/helps.rb:165 +#. Adduser dialog help 3/3 +#: src/include/security/helps.rb:165 msgid "" "<p><b>Group ID Limitations</b>:\n" "Set the minimum and maximum possible group ID.</p>" @@ -607,82 +582,67 @@ "<p><b>그룹 ID 제한:</b>\n" "가능한 그룹 ID의 최소값 및 최대값을 설정합니다.</p>" -#. Misc dialog help 1/14 -#: src/include/security/helps.rb:169 +#. Misc dialog help 1/14 +#: src/include/security/helps.rb:169 msgid "" "<p><big><b>Other Security Settings</b></big></P>\n" -"<p>In this dialog, change miscellaneous settings related to local security." +"<p>In this dialog, change miscellaneous settings related to local security.</p>" msgstr "" "<p><big><b>기타 보안 설정</b></big></P>\n" "<p>이 대화 상자에서는 로컬 보안과 관련된 여러 설정을 변경할 수 있습니다.</p>" -#. Misc dialog help 2/14 -#: src/include/security/helps.rb:173 +#. Misc dialog help 2/14 +#: src/include/security/helps.rb:173 msgid "" "<p><b>File Permissions</b>: Settings for the permissions\n" -"of certain system files are set according to the data in /etc/permissions." -"secure\n" +"of certain system files are set according to the data in /etc/permissions.secure\n" "or /etc/permissions.easy. Which file is used depends on this selection.\n" -"Launching SuSEconfig sets these permissions according to /etc/permissions." -"*.\n" -"This fixes files with incorrect permissions, whether this occurred " -"accidentally\n" +"Launching SuSEconfig sets these permissions according to /etc/permissions.*.\n" +"This fixes files with incorrect permissions, whether this occurred accidentally\n" "or by intruders.</p><p>\n" "With <b>Easy</b>, most of the system files that are only readable by root\n" "in Secure are modified so other users can also read these files.\n" -"Using <b>Secure</b>, certain system files, such as /var/log/messages, can " -"only\n" -"be viewed by the user root. Some programs can only be launched by root or " -"by\n" +"Using <b>Secure</b>, certain system files, such as /var/log/messages, can only\n" +"be viewed by the user root. Some programs can only be launched by root or by\n" "daemons, not by ordinary users.\n" "The most secure setting is <b>Paranoid</B>. With it, you must\n" "decide which users are able to run X applications and setuid programs.</p>\n" msgstr "" "<p><b>파일 권한</b>: 특정 시스템 파일에 대한 권한은\n" -"/etc/permissions.secure 또는 /etc/permissions.easy에 있는 데이터에 따라 설정" -"됩니다.\n" +"/etc/permissions.secure 또는 /etc/permissions.easy에 있는 데이터에 따라 설정됩니다.\n" " 여기서 선택하는 내용에 따라 사용될 파일이 결정됩니다.\n" " SuSEconfig를 실행하면 /etc/permissions.*에 따라 이러한 권한이 설정됩니다.\n" " 이러한 설정을 통해 우연히 발생한 것이든 침입자에 의한 것이든 잘못된 권한이\n" " 있는 파일이 수정됩니다.</p><p>\n" -" <b>낮은</b>을 선택하면 '안전한' 설정에 의해 루트만 읽을 수 있도록 되어 있" -"는\n" +" <b>낮은</b>을 선택하면 '안전한' 설정에 의해 루트만 읽을 수 있도록 되어 있는\n" " 대부분의 시스템 파일이 다른 사용자도 읽을 수 있도록 수정됩니다.\n" " <b>안전한</b>을 선택하면 /var/log/messages와 같은 특정 시스템 파일은 루트\n" " 사용자만 볼 수 있습니다. 또한 일부 프로그램은 일반 사용자가 아닌 루트 또는\n" " 데몬만이 실행할 수 있습니다.\n" " 가장 안전한 설정은 <b>강력한</B>입니다. 이 항목을 선택할 경우\n" -" X 응용 프로그램 및 setuid 프로그램을 사용할 수 있는 사용자를 지정해야 합니" -"다.</p>\n" +" X 응용 프로그램 및 setuid 프로그램을 사용할 수 있는 사용자를 지정해야 합니다.</p>\n" -#. Misc dialog help 6/14 -#: src/include/security/helps.rb:189 +#. Misc dialog help 6/14 +#: src/include/security/helps.rb:189 msgid "" "<p><b>User Launching updatedb</b>: The program updatedb runs \n" -"once a day. It scans your entire file system and creates a database " -"(locatedb)\n" +"once a day. It scans your entire file system and creates a database (locatedb)\n" "that stores the location of every file. The database can be searched by the\n" -"program \"locate\". Here, set the user that runs this command: <b>nobody\n" +"program \"locate\". Here, set the user that runs this command: <b>nobody</b>\n" " (few files) or <b>root</b> (all files).</p>" msgstr "" "<p><b>updatedb를 수행할 사용자</b>: updatedb 프로그램은 하루에 \n" -"한 번 실행됩니다. 이 프로그램은 전체 파일 시스템을 점검하여 모든 파일의 위치" -"가 저장된\n" -" 데이터베이스(locatedb)를 생성합니다. 이 데이터베이스는 \"locate\" 프로그램으" -"로\n" -" 검색할 수 있습니다. 여기서 이 명령을 수행할 사용자를 설정하십시오: <b>익명사" -"용자</b>\n" +"한 번 실행됩니다. 이 프로그램은 전체 파일 시스템을 점검하여 모든 파일의 위치가 저장된\n" +" 데이터베이스(locatedb)를 생성합니다. 이 데이터베이스는 \"locate\" 프로그램으로\n" +" 검색할 수 있습니다. 여기서 이 명령을 수행할 사용자를 설정하십시오: <b>익명사용자</b>\n" " (소수 파일) 또는 <b>루트</b> (모든 파일).</p>" -#. Misc dialog help 10/14 -#: src/include/security/helps.rb:197 +#. Misc dialog help 10/14 +#: src/include/security/helps.rb:197 msgid "" "<p><b>Current Directory in root's Path</b> On a DOS system,\n" "the system first searches for executable files (programs) in the current\n" -"directory then in the current path variable. In contrast, a UNIX-like " -"system\n" +"directory then in the current path variable. In contrast, a UNIX-like system\n" "searches for them exclusively via the search path (variable PATH).</p>" msgstr "" "<p><b>루트 경로의 현재 디렉토리</b> DOS 시스템에서는\n" @@ -690,12 +650,11 @@ " 현재 경로 변수에서 검색합니다. 반대로 UNIX 유형의 시스템에서는\n" " 검색 경로(PATH 변수)를 통해서만 실행 파일을 검색합니다.</p>" -#. Misc dialog help 11/14 -#: src/include/security/helps.rb:204 +#. Misc dialog help 11/14 +#: src/include/security/helps.rb:204 msgid "" "<p><b>Current Directory in the Path of Regular Users</b><br> A DOS\n" -"system first searches for executable files (programs) in the current " -"directory\n" +"system first searches for executable files (programs) in the current directory\n" "then in the current path variable. In contrast, a UNIX-like system searches\n" "for them exclusively via the search path (variable PATH).</p>" msgstr "" @@ -704,16 +663,14 @@ "현재 경로 변수에서 검색합니다. 반대로 UNIX 시스템에서는\n" "검색 경로(PATH 변수)를 통해서만 실행 파일을 검색합니다.</p>" -#. Misc dialog help 12/14 -#: src/include/security/helps.rb:211 +#. Misc dialog help 12/14 +#: src/include/security/helps.rb:211 msgid "" "<p>Some systems set up a work-around by adding the dot (\".\") to the\n" "search path, enabling files in the current path to be found and executed.\n" -"This is highly dangerous because you may accidentally launch unknown " -"programs in\n" +"This is highly dangerous because you may accidentally launch unknown programs in\n" "the current directory instead of the usual systemwide files. As a result,\n" -"executing <i>Trojan Horses</i>, which exploit this weakness and invade your " -"system,\n" +"executing <i>Trojan Horses</i>, which exploit this weakness and invade your system,\n" "is rather easy if you set this option.</p>" msgstr "" "<p>일부 시스템에서는 검색 경로에 점(\".\")을 추가하여 현재 경로의 파일이\n" @@ -723,8 +680,8 @@ " 이 옵션을 설정하면 이러한 취약점을 악용하여 시스템을 공격하는\n" " <i>트로이 목마</i>가 실행될 가능성이 높습니다.</p>" -#. Misc dialog help 13/14 -#: src/include/security/helps.rb:220 +#. Misc dialog help 13/14 +#: src/include/security/helps.rb:220 msgid "" "<p>\"yes\": the dot (\".\") is attached to the end of the search\n" "path of root, making it the last to be searched.</p>" @@ -732,8 +689,8 @@ "<p>\"yes\": 점 (\".\")은 루트의 검색 경로 끝에 붙어\n" "마지막으로 검색하게 합니다.</p>" -#. Misc dialog help 14/14 -#: src/include/security/helps.rb:224 +#. Misc dialog help 14/14 +#: src/include/security/helps.rb:224 msgid "" "<p>\"no\": the user root always must launch programs in the\n" "current directory prefixed with a \"./\". Example: \"./configure\".</p>" @@ -741,64 +698,46 @@ "<p>\"no\": 루트는 현재 디렉토리의 프로그램을 앞에 \"./\"를 \n" "붙여 실행해야 합니다. 예: \"./configure\".</p>" -#. Misc dialog help 14/14 -#: src/include/security/helps.rb:228 +#. Misc dialog help 14/14 +#: src/include/security/helps.rb:228 msgid "" "<p><b>Enable Magic SysRq Keys</b><br> If you check this option, you\n" -"will have some control over the system even if it crashes (for example, " -"during kernel\n" +"will have some control over the system even if it crashes (for example, during kernel\n" "debugging). For details, see /usr/src/linux/Documentation/sysrq.txt</p>" msgstr "" "<p><b>매직 SysRq 키 활성화</b><br> 이 옵션을 선택하면 시스템\n" "작동이 중단되더라도(예를 들어 커널 디버깅 중) 시스템의 일부 기능을\n" -" 제어할 수 있습니다. 자세한 내용은 /usr/src/linux/Documentation/sysrq.txt를 " -"참조하십시오.</p>" +" 제어할 수 있습니다. 자세한 내용은 /usr/src/linux/Documentation/sysrq.txt를 참조하십시오.</p>" -#. help text: security overview dialog 1/ -#: src/include/security/helps.rb:234 -msgid "" -"<P><B>Security Overview</B><BR>This overview shows the most important " -"security settings.</P>" -msgstr "" -"<P><B>보안 개요</B><BR>이 개요는 가장 중요한 보안 설정을 보여 줍니다.</P>" +#. help text: security overview dialog 1/ +#: src/include/security/helps.rb:234 +msgid "<P><B>Security Overview</B><BR>This overview shows the most important security settings.</P>" +msgstr "<P><B>보안 개요</B><BR>이 개요는 가장 중요한 보안 설정을 보여 줍니다.</P>" -#. help text: security overview dialog 1/ -#: src/include/security/helps.rb:238 -msgid "" -"<P>To change the current value, click the link associated to the option.</P>" +#. help text: security overview dialog 1/ +#: src/include/security/helps.rb:238 +msgid "<P>To change the current value, click the link associated to the option.</P>" msgstr "<P>현재 값을 변경하려면 옵션과 연결된 링크를 클릭하십시오.</P>" -#. help text: security overview dialog 1/ -#: src/include/security/helps.rb:242 -msgid "" -"<P> A check mark in the <B>Security Status</B> column means that the current " -"value of the option is secure.</P>" -msgstr "" -"<P><B>보안 상태</B> 열의 확인 표시는 옵션의 현재 값이 보안됨을 의미합니다." +#. help text: security overview dialog 1/ +#: src/include/security/helps.rb:242 +msgid "<P> A check mark in the <B>Security Status</B> column means that the current value of the option is secure.</P>" +msgstr "<P><B>보안 상태</B> 열의 확인 표시는 옵션의 현재 값이 보안됨을 의미합니다.</P>" -#. an error message (rich text) -#: src/include/security/helps.rb:246 -msgid "" -"<P><B>The current value could not be read. The service is probably not " -"installed or the option is missing on the system.</B></P>" -msgstr "" -"<P><B>현재 값을 읽을 수 없습니다. 서비스가 설치되어 있지 않거나 시스템에 옵션" -"이 없습니다.</B></P>" +#. an error message (rich text) +#: src/include/security/helps.rb:246 +msgid "<P><B>The current value could not be read. The service is probably not installed or the option is missing on the system.</B></P>" +msgstr "<P><B>현재 값을 읽을 수 없습니다. 서비스가 설치되어 있지 않거나 시스템에 옵션이 없습니다.</B></P>" -#: src/include/security/helps.rb:252 +#: src/include/security/helps.rb:252 msgid "" "<P>A display manager provides a graphical login screen and can be accessed\n" "across the network by an X server running on another system if so\n" "configured.</P><P>The windows that are being displayed would then transmit\n" -"their data across the network. If that network is not fully trusted, then " -"the\n" -"network traffic can be eavesdropped by an attacker, gaining access not only " -"to\n" -"the graphical content of the display, but also to usernames and passwords " -"that\n" -"are being used.</P><P>If you do not need <EM>XDMCP</EM> for remote " -"graphical\n" +"their data across the network. If that network is not fully trusted, then the\n" +"network traffic can be eavesdropped by an attacker, gaining access not only to\n" +"the graphical content of the display, but also to usernames and passwords that\n" +"are being used.</P><P>If you do not need <EM>XDMCP</EM> for remote graphical\n" "logins, then disable this option.</P>" msgstr "" "<P>디스플레이 관리자는 그래픽 로그인 화면을 제공하며, 구성된 경우\n" @@ -810,14 +749,11 @@ "액세스할 수 있습니다.</P><P>원격 그래픽 로그인에 <EM>XDMCP</EM>가\n" "필요하지 않은 경우 이 옵션을 비활성화하십시오.</P>" -#: src/include/security/helps.rb:262 +#: src/include/security/helps.rb:262 msgid "" -"<P>Upon startup, the system time is being set from the hardware clock of " -"the\n" -"computer. As a consequence, setting the hardware clock before shutting down " -"is\n" -"necessary.</P><P>Consistent system time is essential for the system to " -"create\n" +"<P>Upon startup, the system time is being set from the hardware clock of the\n" +"computer. As a consequence, setting the hardware clock before shutting down is\n" +"necessary.</P><P>Consistent system time is essential for the system to create\n" "correct log messages.</P>" msgstr "" "<P>시작 시 컴퓨터의 하드웨어 클럭에서 시스템 시간을\n" @@ -825,230 +761,133 @@ "설정해야 합니다.</P><P>시스템에서 올바른 로그 메시지를 생성하려면\n" "일관성 있는 시스템 시간이 필요합니다.</P>" -#: src/include/security/helps.rb:268 -msgid "" -"<P>Malfunctions in a system are usually detected by anomalies in its " -"behaviour. Syslog messages about events that reoccur on a regular basis are " -"important to find causes of problems. And the absence of a single record can " -"tell more than the absence of all log records.</P><P>Therefore, syslog " -"messages of system events are only useful if they are present.</P>" -msgstr "" -"<P>시스템 오작동은 대체로 비정상적인 동작으로 감지됩니다. 정기적으로 재발생하" -"는 이벤트에 대한 syslog 메시지는 문제의 원인을 찾는 데 중요합니다. 단일 레코" -"드가 없는 것이 모든 로그 레코드 부재 이상을 의미할 수 있습니다.</P><P>따라서 " -"시스템 이벤트의 syslog 메시지는 있는 경우에만 유용합니다.</P>" +#: src/include/security/helps.rb:268 +msgid "<P>Malfunctions in a system are usually detected by anomalies in its behaviour. Syslog messages about events that reoccur on a regular basis are important to find causes of problems. And the absence of a single record can tell more than the absence of all log records.</P><P>Therefore, syslog messages of system events are only useful if they are present.</P>" +msgstr "<P>시스템 오작동은 대체로 비정상적인 동작으로 감지됩니다. 정기적으로 재발생하는 이벤트에 대한 syslog 메시지는 문제의 원인을 찾는 데 중요합니다. 단일 레코드가 없는 것이 모든 로그 레코드 부재 이상을 의미할 수 있습니다.</P><P>따라서 시스템 이벤트의 syslog 메시지는 있는 경우에만 유용합니다.</P>" -#: src/include/security/helps.rb:271 -msgid "" -"<P>Chroot execution environments restrict a process to only access files " -"that it needs by placing them in a separate subdirectory and running the " -"process with a changed root (chroot) set to that directory.</P>" -msgstr "" -"<P>Chroot 실행 환경은 별도의 하위 디렉토리에 배치하고 해당 디렉토리로 설정된 " -"변경된 루트(chroot)로 프로세스를 실행하여 필요한 액세스 파일에만 액세스하도" -"록 프로세스를 제한합니다.</P>" +#: src/include/security/helps.rb:271 +msgid "<P>Chroot execution environments restrict a process to only access files that it needs by placing them in a separate subdirectory and running the process with a changed root (chroot) set to that directory.</P>" +msgstr "<P>Chroot 실행 환경은 별도의 하위 디렉토리에 배치하고 해당 디렉토리로 설정된 변경된 루트(chroot)로 프로세스를 실행하여 필요한 액세스 파일에만 액세스하도록 프로세스를 제한합니다.</P>" -#: src/include/security/helps.rb:274 -msgid "" -"<P>The DHCP client daemon should run as the user <EM>dhcpd</EM> to minimize " -"a possible threat if the service is found vulnerable to a weakness in its " -"program code.</P><P>Note that dhcpd must never run as <EM>root</EM> or with " -"the <EM>CAP_SYS_CHROOT</EM> capability for the chroot execution confinement " -"to be effective.</P>" -msgstr "" -"<P>서비스가 프로그램 코드의 약점에 취약할 경우 가능한 위협을 최소화하려면 " -"DHCP 클라이언트 데몬을 사용자 <EM>dhcpd</EM>로 실행해야 합니다.</P><P>chroot " -"실행 제한을 적용하려면 <EM>root</EM>로 또는 <EM>CAP_SYS_CHROOT</EM> 기능을 사" -"용하여 dhcpd를 실행하면 안 됩니다.</P>" +#: src/include/security/helps.rb:274 +msgid "<P>The DHCP client daemon should run as the user <EM>dhcpd</EM> to minimize a possible threat if the service is found vulnerable to a weakness in its program code.</P><P>Note that dhcpd must never run as <EM>root</EM> or with the <EM>CAP_SYS_CHROOT</EM> capability for the chroot execution confinement to be effective.</P>" +msgstr "<P>서비스가 프로그램 코드의 약점에 취약할 경우 가능한 위협을 최소화하려면 DHCP 클라이언트 데몬을 사용자 <EM>dhcpd</EM>로 실행해야 합니다.</P><P>chroot 실행 제한을 적용하려면 <EM>root</EM>로 또는 <EM>CAP_SYS_CHROOT</EM> 기능을 사용하여 dhcpd를 실행하면 안 됩니다.</P>" -#: src/include/security/helps.rb:277 -msgid "" -"<P>Administrators should never log on as <EM>root</EM> into an X Window " -"session to minimize the usage of the root privileges.</P><P>This option does " -"not help against careless administrators, but shall prevent attackers to be " -"able to log on as <EM>root</EM> via the display manager if they guess or " -"otherwise acquire the password.</P>" -msgstr "" -"<P>루트 권한의 사용을 최소화하려면 관리자가 <EM>root</EM>로 X Window 세션에 " -"로그온하면 안 됩니다.</P><P>이 옵션은 부주의한 관리자에게 도움이 되지 않지만 " -"공격자가 유추하거나 다른 방법으로 비밀번호를 얻을 경우 디스플레이 관리자를 통" -"해 <EM>root</EM>로 로그온할 수 없도록 방지합니다.</P>" +#: src/include/security/helps.rb:277 +msgid "<P>Administrators should never log on as <EM>root</EM> into an X Window session to minimize the usage of the root privileges.</P><P>This option does not help against careless administrators, but shall prevent attackers to be able to log on as <EM>root</EM> via the display manager if they guess or otherwise acquire the password.</P>" +msgstr "<P>루트 권한의 사용을 최소화하려면 관리자가 <EM>root</EM>로 X Window 세션에 로그온하면 안 됩니다.</P><P>이 옵션은 부주의한 관리자에게 도움이 되지 않지만 공격자가 유추하거나 다른 방법으로 비밀번호를 얻을 경우 디스플레이 관리자를 통해 <EM>root</EM>로 로그온할 수 없도록 방지합니다.</P>" -#: src/include/security/helps.rb:280 +#: src/include/security/helps.rb:280 msgid "" -"<P>X Window clients, e.g. programs that open a window on your display, " -"connect\n" -"to the X server that runs on the physical machine. Programs can also run on " -"a\n" +"<P>X Window clients, e.g. programs that open a window on your display, connect\n" +"to the X server that runs on the physical machine. Programs can also run on a\n" "different system and display their content on the X server through network\n" -"connections.</P><P>When enabled, the X server listens on a port 6000 plus " -"the\n" -"display number. Since network traffic is transferred unencrypted and " -"therefore\n" +"connections.</P><P>When enabled, the X server listens on a port 6000 plus the\n" +"display number. Since network traffic is transferred unencrypted and therefore\n" "subject to network sniffing, and since the port held open by the X server\n" -"offers attack options, the secure setting is to disable it.</P><P>To display " -"X\n" -"Window clients across a network, we recommend the use of secure shell " -"(<EM>ssh</EM>), which allows the X Window clients to connect to the X server " -"through the encrypted ssh connection.</P>" +"offers attack options, the secure setting is to disable it.</P><P>To display X\n" +"Window clients across a network, we recommend the use of secure shell (<EM>ssh</EM>), which allows the X Window clients to connect to the X server through the encrypted ssh connection.</P>" msgstr "" "<P>X Window 클라이언트(예: 디스플레이에서 창을 여는 프로그램)는\n" "물리적 컴퓨터에서 실행되는 X 서버에 연결합니다. 프로그램이 다른 시스템에서\n" "실행되고 네트워크 연결을 통해 해당 컨텐트를 X 서버에\n" "표시할 수도 있습니다.</P><P>활성화된 경우 X 서버가 포트 6000 및\n" -"디스플레이 번호에서 수신 대기합니다. 네트워크 트래픽은 암호화되지 않은 상태" -"로 전송되므로\n" +"디스플레이 번호에서 수신 대기합니다. 네트워크 트래픽은 암호화되지 않은 상태로 전송되므로\n" "네트워크 스니핑이 발생할 수 있으며, X 서버에 의해 열린 포트가\n" -"공격 옵션을 제공하므로 보안 설정은 비활성화하는 것입니다.</P><P>네트워크를 통" -"해 X\n" -"Window 클라이언트를 표시하려면 X Window 클라이언트가 암호화된 ssh 연결을 통" -"해 X 서버에 연결할 수 있게 하는 <EM>ssh</EM>(Secure Shell)를 사용하는 것이 좋" -"습니다.</P>" +"공격 옵션을 제공하므로 보안 설정은 비활성화하는 것입니다.</P><P>네트워크를 통해 X\n" +"Window 클라이언트를 표시하려면 X Window 클라이언트가 암호화된 ssh 연결을 통해 X 서버에 연결할 수 있게 하는 <EM>ssh</EM>(Secure Shell)를 사용하는 것이 좋습니다.</P>" -#: src/include/security/helps.rb:290 +#: src/include/security/helps.rb:290 msgid "" -"<P>The email delivery subsystem is always started. However, it does not " -"expose\n" -"itself outside the system by default, since it does not listen on the SMTP " -"network port 25.</P><P>If you do not deliver emails to your system through " -"the SMTP protocol, then disable this option.</P>" +"<P>The email delivery subsystem is always started. However, it does not expose\n" +"itself outside the system by default, since it does not listen on the SMTP network port 25.</P><P>If you do not deliver emails to your system through the SMTP protocol, then disable this option.</P>" msgstr "" -"<P>전자 메일 전달 하위 시스템은 항상 시작됩니다. 그러나 SMTP 네트워크 포트 25" -"에서\n" -"수신 대기하지 않으므로 기본적으로 시스템 외부에 노출되지 않습니다.<P>SMTP 프로토콜을 통해 전자 메일을 시스템에 전달하지 않을 경우 이 옵션을 " -"비활성화하십시오.</P>" +"<P>전자 메일 전달 하위 시스템은 항상 시작됩니다. 그러나 SMTP 네트워크 포트 25에서\n" +"수신 대기하지 않으므로 기본적으로 시스템 외부에 노출되지 않습니다.</P><P>SMTP 프로토콜을 통해 전자 메일을 시스템에 전달하지 않을 경우 이 옵션을 비활성화하십시오.</P>" -#: src/include/security/helps.rb:293 +#: src/include/security/helps.rb:293 msgid "" "<P>If a package containing a service that is currently running is being\n" "updated, the service is restarted after the files in the package have been\n" "installed.</P><P>This makes sense in most cases, and it is safe to do,\n" "considering that many services either need their binaries or configuration\n" -"files accessible in the file system. Otherwise these services would " -"continue\n" +"files accessible in the file system. Otherwise these services would continue\n" "to run until the services are stopped, e.g. running daemons are\n" "killed.</P><P>This setting should only be changed if there is a specific\n" "reason to do so.</P>" msgstr "" "<P>현재 실행 중인 서비스가 포함된 패키지를\n" "업데이트하는 경우 패키지의 파일이 설치된 후\n" -"서비스가 다시 시작됩니다.</P><P>이 동작은 대부분의 경우에 적합하며, 파일 시스" -"템에서\n" +"서비스가 다시 시작됩니다.</P><P>이 동작은 대부분의 경우에 적합하며, 파일 시스템에서\n" "많은 서비스의 이진 파일이나 구성 파일에 액세스할 수 있어야 하므로\n" "이렇게 해야 안전합니다. 그렇지 않으면 서비스가 중지될 때까지\n" "(예: 실행 중인 데몬이 종료됨) 이러한 서비스가 계속\n" "실행됩니다.</P><P>특정 이유가 있는 경우에만 이 설정을\n" "변경해야 합니다.</P>" -#: src/include/security/helps.rb:303 +#: src/include/security/helps.rb:303 msgid "" "<P>If a package containing a service that is currently running is being\n" "uninstalled, the service is stopped before the files of the package are\n" "removed.</P><P>This makes sense in most cases, and it is safe to do,\n" "considering that many services either need their binaries or configuration\n" -"files accessible in the file system. Otherwise these services would " -"continue\n" +"files accessible in the file system. Otherwise these services would continue\n" "to run until they are stopped, e.g. running daemons are\n" "killed.</P><P>This setting should only be changed if there is a specific\n" "reason to do so.</P>" msgstr "" "<P>현재 실행 중인 서비스가 포함된 패키지를\n" "제거하는 경우 패키지의 파일이 제거되기 전에\n" -"서비스가 중지됩니다.</P><P>이 동작은 대부분의 경우에 적합하며, 파일 시스템에" -"서\n" +"서비스가 중지됩니다.</P><P>이 동작은 대부분의 경우에 적합하며, 파일 시스템에서\n" "많은 서비스의 이진 파일이나 구성 파일에 액세스할 수 있어야 하므로\n" "이렇게 해야 안전합니다. 그렇지 않으면 서비스가 중지될 때까지\n" "(예: 실행 중인 데몬이 종료됨) 이러한 서비스가 계속\n" "실행됩니다.</P><P>특정 이유가 있는 경우에만 이 설정을\n" "변경해야 합니다.</P>" -#: src/include/security/helps.rb:313 -msgid "" -"<P>A system can be overwhelmed with numerous connection attempts so that the " -"system runs out of memory, leading to a Denial of Service (DoS) " -"vulnerability.</P><P>The use of syncookies is a method that can help in such " -"situations. But in configurations with a very large number of legitimate " -"connection attempts from one source, the <EM>Enabled</EM> setting can cause " -"problems with denied TCP connections under high load.</P><P>Still, for most " -"environments, syncookies are the first line of defense against SYN flood DoS " -"attacks, so the secure setting is <EM>Enabled</EM>.</P>" -msgstr "" -"<P>시스템의 많은 연결 시도로 인해 시스템 메모리가 부족하여 DoS(서비스 거부) " -"취약성이 발생할 수 있습니다.</P><P>syncookies 사용은 이러한 경우에 유용할 수 " -"있는 방법입니다. 그러나 한 소스의 많은 합법적인 연결 시도가 있는 구성에서는 " -"<EM>활성화됨</EM> 설정으로 인해 높은 부하에서 TCP 연결 거부 문제가 발생할 수 " -"있습니다.</P><P>여전히, 대부분의 환경에서 syncookies는 SYN 서비스 장애 DoS 공" -"격에 대한 1차 방어선이므로 보안 설정은 <EM>활성화됨</EM>입니다.</P>" +#: src/include/security/helps.rb:313 +msgid "<P>A system can be overwhelmed with numerous connection attempts so that the system runs out of memory, leading to a Denial of Service (DoS) vulnerability.</P><P>The use of syncookies is a method that can help in such situations. But in configurations with a very large number of legitimate connection attempts from one source, the <EM>Enabled</EM> setting can cause problems with denied TCP connections under high load.</P><P>Still, for most environments, syncookies are the first line of defense against SYN flood DoS attacks, so the secure setting is <EM>Enabled</EM>.</P>" +msgstr "<P>시스템의 많은 연결 시도로 인해 시스템 메모리가 부족하여 DoS(서비스 거부) 취약성이 발생할 수 있습니다.</P><P>syncookies 사용은 이러한 경우에 유용할 수 있는 방법입니다. 그러나 한 소스의 많은 합법적인 연결 시도가 있는 구성에서는 <EM>활성화됨</EM> 설정으로 인해 높은 부하에서 TCP 연결 거부 문제가 발생할 수 있습니다.</P><P>여전히, 대부분의 환경에서 syncookies는 SYN 서비스 장애 DoS 공격에 대한 1차 방어선이므로 보안 설정은 <EM>활성화됨</EM>입니다.</P>" -#: src/include/security/helps.rb:316 src/include/security/helps.rb:320 -msgid "" -"<P>IP forwarding means to pass on network packets that have been received, " -"but that are not destined for one of the system's configured network " -"interfaces, e.g. network interface addresses.</P><P>If a system forwards " -"network traffic on ISO/OSI layer 3, it is called a router. If you do not " -"need that routing functionality, then disable this option.</P>" -msgstr "" -"<P>IP 전달은 수신되었지만 시스템의 구성된 네트워크 인터페이스(예: 네트워크 인" -"터페이스 주소) 중 하나로 지정되지 않은 네트워크 패킷을 전달하는 것을 의미합니" -"다.</P><P>시스템이 ISO/OSI 레이어 3에서 네트워크 트래픽을 전달하는 경우 라우" -"터가 호출됩니다. 이 라우팅 기능이 필요하지 않으면 이 옵션을 비활성화합니다." +#: src/include/security/helps.rb:316 src/include/security/helps.rb:320 +msgid "<P>IP forwarding means to pass on network packets that have been received, but that are not destined for one of the system's configured network interfaces, e.g. network interface addresses.</P><P>If a system forwards network traffic on ISO/OSI layer 3, it is called a router. If you do not need that routing functionality, then disable this option.</P>" +msgstr "<P>IP 전달은 수신되었지만 시스템의 구성된 네트워크 인터페이스(예: 네트워크 인터페이스 주소) 중 하나로 지정되지 않은 네트워크 패킷을 전달하는 것을 의미합니다.</P><P>시스템이 ISO/OSI 레이어 3에서 네트워크 트래픽을 전달하는 경우 라우터가 호출됩니다. 이 라우팅 기능이 필요하지 않으면 이 옵션을 비활성화합니다.</P>" -#: src/include/security/helps.rb:319 +#: src/include/security/helps.rb:319 msgid "<P>This setting applies to <EM>IPv4</EM> only.</P>" msgstr "<P>이 설정은 <EM>IPv4</EM>에만 적용합니다.</P>" -#: src/include/security/helps.rb:323 +#: src/include/security/helps.rb:323 msgid "<P>This setting applies to <EM>IPv6</EM> only.</P>" msgstr "<P>이 설정은 <EM>IPv6</EM>에만 적용합니다.</P>" -#: src/include/security/helps.rb:324 -msgid "" -"<P>Magic SysRq Keys enable some control over the system even if it crashes " -"(e.g. during kernel debugging) or if the system does not respond.</P>" -msgstr "" -"<P>Magic SysRq 키를 사용하면 손상이 되거나(예: 커널 디버깅 중) 시스템이 응답" -"하지 않는 경우에도 시스템에 대한 일부 제어를 수행할 수 있습니다.</P>" +#: src/include/security/helps.rb:324 +msgid "<P>Magic SysRq Keys enable some control over the system even if it crashes (e.g. during kernel debugging) or if the system does not respond.</P>" +msgstr "<P>Magic SysRq 키를 사용하면 손상이 되거나(예: 커널 디버깅 중) 시스템이 응답하지 않는 경우에도 시스템에 대한 일부 제어를 수행할 수 있습니다.</P>" -#: src/include/security/helps.rb:327 -msgid "" -"<P>There are predefined file permissions in /etc/permissions.* files. The " -"most restrictive file permissions are defined 'secure' or 'paranoid' file." -msgstr "" -"<P>/etc/permissions.* 파일에 사전 정의된 파일 권한이 있습니다. 가장 제한적인 " -"파일 권한은 'secure' 또는 'paranoid' 파일을 정의합니다.</P>" +#: src/include/security/helps.rb:327 +msgid "<P>There are predefined file permissions in /etc/permissions.* files. The most restrictive file permissions are defined 'secure' or 'paranoid' file.</P>" +msgstr "<P>/etc/permissions.* 파일에 사전 정의된 파일 권한이 있습니다. 가장 제한적인 파일 권한은 'secure' 또는 'paranoid' 파일을 정의합니다.</P>" -#: src/include/security/helps.rb:330 -msgid "" -"<P>Basic system services must be enabled to provide system consistency and " -"to run the security-related services.</P>" -msgstr "" -"<P>시스템 일관성을 제공하고 보안 관련 서비스를 실행하려면 기본 시스템 서비스" -"를 활성화해야 합니다.</P>" +#: src/include/security/helps.rb:330 +msgid "<P>Basic system services must be enabled to provide system consistency and to run the security-related services.</P>" +msgstr "<P>시스템 일관성을 제공하고 보안 관련 서비스를 실행하려면 기본 시스템 서비스를 활성화해야 합니다.</P>" -#: src/include/security/helps.rb:333 -msgid "" -"<P>Every running service is a potential target of a security attack. " -"Therefore it is recommended to turn off all services which are not used by " -"the system.</P>" -msgstr "" -"<P>실행 중인 모든 서비스는 보안 공격의 잠재적인 대상입니다. 따라서 시스템에" -"서 사용하지 않는 모든 서비스는 해제하는 것이 좋습니다.</P>" +#: src/include/security/helps.rb:333 +msgid "<P>Every running service is a potential target of a security attack. Therefore it is recommended to turn off all services which are not used by the system.</P>" +msgstr "<P>실행 중인 모든 서비스는 보안 공격의 잠재적인 대상입니다. 따라서 시스템에서 사용하지 않는 모든 서비스는 해제하는 것이 좋습니다.</P>" -#: src/include/security/helps.rb:341 +#: src/include/security/helps.rb:341 msgid "" "<p><b><big>Boot Security</big></b></p>\n" "<p>In this dialog, change various boot settings related to security.</p>" msgstr "" "<p><b><big>부트 보안</big></b></p>\n" -"<p>이 대화 상자에서는 보안과 관련된 다양한 부트 설정을 변경할 수 있습니다." +"<p>이 대화 상자에서는 보안과 관련된 다양한 부트 설정을 변경할 수 있습니다.</p>" -#. TRANSLATORS: part of help text - default action (the default is -#. reboot) -#: src/include/security/helps.rb:348 +#. TRANSLATORS: part of help text - default action (the default is +#. reboot) +#: src/include/security/helps.rb:348 msgid "" "Usually the system reboots. Sometimes it is desirable\n" "to ignore this event, for example, when the system serves as both\n" @@ -1058,8 +897,8 @@ "나은 경우도 있는데, 예를 들어 시스템이 워크스테이션과 서버의\n" "역할을 모두 수행하는 경우가 그렇습니다." -#. TRANSLATORS: part of help text - default action (the default is halt) -#: src/include/security/helps.rb:355 +#. TRANSLATORS: part of help text - default action (the default is halt) +#: src/include/security/helps.rb:355 msgid "" "By default the system halts but sometimes it is desirable\n" "to ignore this event, for example, when the system serves as both\n" @@ -1069,9 +908,9 @@ "나은 경우도 있는데, 예를 들어 시스템이 워크스테이션과 서버의\n" "역할을 모두 수행하는 경우가 그렇습니다." -#. Boot dialog help 2/4 -#. TRANSLATORS: %s is help text - default action -#: src/include/security/helps.rb:364 +#. Boot dialog help 2/4 +#. TRANSLATORS: %s is help text - default action +#: src/include/security/helps.rb:364 msgid "" "<p><b>Interpretation of Ctrl + Alt + Del</b>:\n" "Configure what the system should do in response to\n" @@ -1083,8 +922,8 @@ "시스템에서 수행할 작업을\n" "구성합니다. %s</p>" -#. Boot dialog help 3/4 -#: src/include/security/helps.rb:373 +#. Boot dialog help 3/4 +#: src/include/security/helps.rb:373 msgid "" "<p><b>Shutdown Behaviour of Login Manager</b>:\n" "Set who is allowed to shut down the machine from %s.</p>\n" @@ -1092,72 +931,69 @@ "<p><b>로그인 관리자의 시스템 종료 동작</b>:\n" "%s에서 시스템을 종료할 수 있는 사용자를 설정합니다.</p>\n" -#. Boot dialog help 4/4 -#: src/include/security/helps.rb:377 +#. Boot dialog help 4/4 +#: src/include/security/helps.rb:377 msgid "" "<p><b>Hibernate System</b>:\n" -"Set the conditions for allowing users to hibernate the system. By default, " -"user on active console has such right.\n" -"Other options are allowing the action to any user or requiring " -"authentication in all cases.</p>\n" +"Set the conditions for allowing users to hibernate the system. By default, user on active console has such right.\n" +"Other options are allowing the action to any user or requiring authentication in all cases.</p>\n" msgstr "" "<p><b>시스템 최대 절전 모드</b>:\n" -"사용자가 시스템을 최대 절전 모드로 전환할 수 있게 하는 조건을 설정합니다. 기" -"본적으로 활성 콘솔의 사용자에게 해당 권한이 있습니다.\n" +"사용자가 시스템을 최대 절전 모드로 전환할 수 있게 하는 조건을 설정합니다. 기본적으로 활성 콘솔의 사용자에게 해당 권한이 있습니다.\n" "기타 옵션은 사용자에게 작업 허용 또는 모든 경우에 인증 필요입니다.</p>\n" -#. level name -#: src/include/security/levels.rb:54 +#. level name +#: src/include/security/levels.rb:54 msgid "Workstation" msgstr "워크스테이션" -#. level name -#: src/include/security/levels.rb:56 +#. level name +#: src/include/security/levels.rb:56 msgid "Roaming Device" msgstr "로밍 장치" -#. level name -#: src/include/security/levels.rb:58 +#. level name +#: src/include/security/levels.rb:58 msgid "Network Server" msgstr "네트워크 서버" -#. RadioButton label -#: src/include/security/levels.rb:63 +#. RadioButton label +#: src/include/security/levels.rb:63 msgid "&Workstation" msgstr "워크스테이션(&W)" -#. RadioButton label -#: src/include/security/levels.rb:65 +#. RadioButton label +#: src/include/security/levels.rb:65 msgid "&Roaming Device" msgstr "로밍 장치(&R)" -#. RadioButton label -#: src/include/security/levels.rb:67 +#. RadioButton label +#: src/include/security/levels.rb:67 msgid "Network &Server" msgstr "네트워크 서버(&S)" -#. Adduser dialog caption -#: src/include/security/users.rb:45 src/include/security/wizards.rb:59 +#. Adduser dialog caption +#: src/include/security/users.rb:45 src/include/security/wizards.rb:59 msgid "User Addition" msgstr "사용자 추가" -#. Frame label -#: src/include/security/users.rb:55 +#. Frame label +#: src/include/security/users.rb:55 msgid "User ID Limitations" msgstr "사용자 ID 제한" -#. Frame label -#: src/include/security/users.rb:67 +#. Frame label +#: src/include/security/users.rb:67 msgid "Group ID Limitations" msgstr "그룹 ID 제한" -#. Popup text -#: src/include/security/users.rb:127 +#. Popup text +#: src/include/security/users.rb:127 msgid "The minimum user ID cannot be larger than the maximum." msgstr "최소 사용자 ID 값은 최대값보다 클 수 없습니다." -#. Popup text -#: src/include/security/users.rb:134 +#. Popup text +#: src/include/security/users.rb:134 msgid "" "The minimum group ID cannot be larger than the\n" "maximum." @@ -1165,310 +1001,310 @@ "최소 그룹 ID 값은 최대값보다 클 수\n" "없습니다." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. * File: include/security/widgets.ycp -#. * Module: Security configuration -#. * Summary: Security widgets definitions -#. * Authors: Michal Svec -#. * -#. * $Id$ -#. * -#. * This file contains the definitions of all widgets used by the -#. * security module. They are all in one map (function) called -#. * WIDGETS. -#. -#. <pre> -#. -#. The WIDGETS format: -#. ------------------- -#. -#. map WIDGETS = $[ -#. "Item unique ID" : $[ -#. "Widget" : "ComboBox", -#. "Label" : "Item Label", -#. "Options" : [ "option1", "option2", ... ], -#. "Value" : "option2" -#. ], -#. ... -#. ]; -#. -#. The "Value" is the current value of this option and one from "Options". -#. -#. Particular "Options" can be either <string> or [ <string>, <string> ]. In the -#. latter case, the first string is used as ID and the second is displayed. For -#. example: [ "option1", ["option2",_("Option2 translation")], ... ]. -#. -#. Possible "Widget" values so far: "ComboBox, CheckBox, TextEntry". -#. -#. Implementation: -#. --------------- -#. -#. map2widget("ID") -#. - look up the "ID" in the "WIDGETS" map -#. - create the widget -#. -#. widget2value("ID") -#. - query UI for the widget with `id(ID) -#. - return its current value -#. -#. updatewidget("ID") -#. - look up the "ID" and change its "Value" to the "val" -#. - updates the WIDGETS map -#. - called after start and after each subdialog [OK] -#. - must check if the value is in "Options"! (TODO) -#. -#. processinput() -#. - return true (OK) or false (abort, back, nil, help!, ...) -#. -#. </pre> -#. -#. * -#. @return [Hash] all widgets -#: src/include/security/widgets.rb:87 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. * File: include/security/widgets.ycp +#. * Module: Security configuration +#. * Summary: Security widgets definitions +#. * Authors: Michal Svec +#. * +#. * $Id$ +#. * +#. * This file contains the definitions of all widgets used by the +#. * security module. They are all in one map (function) called +#. * WIDGETS. +#. +#. <pre> +#. +#. The WIDGETS format: +#. ------------------- +#. +#. map WIDGETS = $[ +#. "Item unique ID" : $[ +#. "Widget" : "ComboBox", +#. "Label" : "Item Label", +#. "Options" : [ "option1", "option2", ... ], +#. "Value" : "option2" +#. ], +#. ... +#. ]; +#. +#. The "Value" is the current value of this option and one from "Options". +#. +#. Particular "Options" can be either <string> or [ <string>, <string> ]. In the +#. latter case, the first string is used as ID and the second is displayed. For +#. example: [ "option1", ["option2",_("Option2 translation")], ... ]. +#. +#. Possible "Widget" values so far: "ComboBox, CheckBox, TextEntry". +#. +#. Implementation: +#. --------------- +#. +#. map2widget("ID") +#. - look up the "ID" in the "WIDGETS" map +#. - create the widget +#. +#. widget2value("ID") +#. - query UI for the widget with `id(ID) +#. - return its current value +#. +#. updatewidget("ID") +#. - look up the "ID" and change its "Value" to the "val" +#. - updates the WIDGETS map +#. - called after start and after each subdialog [OK] +#. - must check if the value is in "Options"! (TODO) +#. +#. processinput() +#. - return true (OK) or false (abort, back, nil, help!, ...) +#. +#. </pre> +#. +#. * +#. @return [Hash] all widgets +#: src/include/security/widgets.rb:87 msgid "Ignore" msgstr "무시" -#: src/include/security/widgets.rb:88 +#: src/include/security/widgets.rb:88 msgid "Reboot" msgstr "재부팅" -#: src/include/security/widgets.rb:89 +#: src/include/security/widgets.rb:89 msgid "Halt" msgstr "컴퓨터 끄기" -#: src/include/security/widgets.rb:93 +#: src/include/security/widgets.rb:93 msgid "Only root" msgstr "루트만" -#: src/include/security/widgets.rb:94 +#: src/include/security/widgets.rb:94 msgid "All Users" msgstr "모든 사용자" -#: src/include/security/widgets.rb:95 +#: src/include/security/widgets.rb:95 msgid "Nobody" msgstr "익명사용자" -#. ComboBox label -#: src/include/security/widgets.rb:117 +#. ComboBox label +#: src/include/security/widgets.rb:117 msgid "&Interpretation of Ctrl + Alt + Del" msgstr "Ctrl + Alt + Del의 해석(&I)" -#. CheckBox label -#: src/include/security/widgets.rb:126 +#. CheckBox label +#: src/include/security/widgets.rb:126 msgid "Allow Remote &Graphical Login" msgstr "원격 그래픽 로그인 허용(&G)" -#. CheckBox label -#: src/include/security/widgets.rb:132 +#. CheckBox label +#: src/include/security/widgets.rb:132 msgid "&Magic SysRq Keys" msgstr "Magic SysRq 키(&M)" -#. ComboBox value -#: src/include/security/widgets.rb:135 +#. ComboBox value +#: src/include/security/widgets.rb:135 msgid "Disable" msgstr "비활성화" -#. ComboBox value -#: src/include/security/widgets.rb:137 +#. ComboBox value +#: src/include/security/widgets.rb:137 msgid "Enable All Functions" msgstr "모든 기능 활성화" -#. IntField label -#: src/include/security/widgets.rb:144 +#. IntField label +#: src/include/security/widgets.rb:144 msgid "&Delay after Incorrect Login Attempt" msgstr "잘못된 로그인 후에 기다리는 시간(&D)" -#. IntField label -#. IntField label -#: src/include/security/widgets.rb:152 src/include/security/widgets.rb:199 +#. IntField label +#. IntField label +#: src/include/security/widgets.rb:152 src/include/security/widgets.rb:199 msgid "Maxim&um" msgstr "최대(&U)" -#. IntField label -#. IntField label -#: src/include/security/widgets.rb:158 src/include/security/widgets.rb:212 +#. IntField label +#. IntField label +#: src/include/security/widgets.rb:158 src/include/security/widgets.rb:212 msgid "M&inimum" msgstr "최소(&I)" -#. ComboBox label -#: src/include/security/widgets.rb:164 +#. ComboBox label +#: src/include/security/widgets.rb:164 msgid "System Hybernation" msgstr "시스템 최대 절전 모드" -#. ComboBox value -#: src/include/security/widgets.rb:167 +#. ComboBox value +#: src/include/security/widgets.rb:167 msgid "User on the active console" msgstr "활성 콘솔의 사용자" -#. ComboBox value -#: src/include/security/widgets.rb:169 +#. ComboBox value +#: src/include/security/widgets.rb:169 msgid "Anyone can hibernate" msgstr "누구든지 최대 절전 모드로 전환할 수 있음" -#. ComboBox value -#: src/include/security/widgets.rb:171 +#. ComboBox value +#: src/include/security/widgets.rb:171 msgid "Authentication always required" msgstr "항상 인증 필요" -#. ComboBox label -#: src/include/security/widgets.rb:178 +#. ComboBox label +#: src/include/security/widgets.rb:178 msgid "P&assword Encryption Method" msgstr "비밀번호 암호화 방법(&A)" -#. CheckBox label -#: src/include/security/widgets.rb:192 +#. CheckBox label +#: src/include/security/widgets.rb:192 msgid "&Check New Passwords" msgstr "새 비밀번호 확인(&C)" -#. IntField label -#: src/include/security/widgets.rb:205 +#. IntField label +#: src/include/security/widgets.rb:205 msgid "Numb&er of Passwords to Remember" msgstr "기억할 비밀번호 수(&E)" -#. IntField label -#: src/include/security/widgets.rb:218 +#. IntField label +#: src/include/security/widgets.rb:218 msgid "&Minimum Acceptable Password Length" msgstr "허용될수 있는 비밀번호의 최소 길이(&M)" -#. IntField label -#: src/include/security/widgets.rb:226 +#. IntField label +#: src/include/security/widgets.rb:226 msgid "&Days before Password Expires Warning" msgstr "비밀번호 만료 경고 기간(&D)" -#. ComboBox label -#: src/include/security/widgets.rb:234 +#. ComboBox label +#: src/include/security/widgets.rb:234 msgid "&File Permissions" msgstr "파일 권한(&F)" -#. ComboBox value -#: src/include/security/widgets.rb:237 +#. ComboBox value +#: src/include/security/widgets.rb:237 msgid "Easy" msgstr "낮음" -#. ComboBox value -#: src/include/security/widgets.rb:239 +#. ComboBox value +#: src/include/security/widgets.rb:239 msgid "Secure" msgstr "안전한" -#. ComboBox value -#: src/include/security/widgets.rb:241 +#. ComboBox value +#: src/include/security/widgets.rb:241 msgid "Paranoid" msgstr "강력한" -#. ComboBox label -#: src/include/security/widgets.rb:248 +#. ComboBox label +#: src/include/security/widgets.rb:248 msgid "&User Launching updatedb" msgstr "updatedb를 수행할 사용자(&U)" -#. IntField label -#: src/include/security/widgets.rb:255 +#. IntField label +#: src/include/security/widgets.rb:255 msgid "Ma&ximum" msgstr "최대(&X)" -#. IntField label -#: src/include/security/widgets.rb:261 +#. IntField label +#: src/include/security/widgets.rb:261 msgid "&Minimum" msgstr "최소(&M)" -#. ComboBox label -#. TRANSLATORS: %s will be the configured display manager usually: GDM or KDM, -#. but could be XDM,WDM,ENTRANCE,CONSOLE -#: src/include/security/widgets.rb:277 +#. ComboBox label +#. TRANSLATORS: %s will be the configured display manager usually: GDM or KDM, +#. but could be XDM,WDM,ENTRANCE,CONSOLE +#: src/include/security/widgets.rb:277 msgid "&Shutdown Behaviour of %s Login Manager:" msgstr "%s 로그인 관리자의 시스템 종료 동작(&S):" -#: src/include/security/wizards.rb:53 +#: src/include/security/wizards.rb:53 msgid "Predefined Security Configurations" msgstr "사전 정의된 보안 구성" -#: src/include/security/wizards.rb:62 +#: src/include/security/wizards.rb:62 msgid "Security" msgstr "보안" -#. Dialog caption -#: src/include/security/wizards.rb:159 +#. Dialog caption +#: src/include/security/wizards.rb:159 msgid "Security Configuration" msgstr "보안 구성" -#. Label -#: src/include/security/wizards.rb:161 +#. Label +#: src/include/security/wizards.rb:161 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. Security read dialog caption -#: src/modules/Security.rb:638 +#. Security read dialog caption +#: src/modules/Security.rb:638 msgid "Saving Security Configuration" msgstr "보안 설정 저장" -#. Progress stage 1/4 -#: src/modules/Security.rb:647 +#. Progress stage 1/4 +#: src/modules/Security.rb:647 msgid "Write security settings" msgstr "보안 설정 기록" -#. Progress stage 2/4 -#: src/modules/Security.rb:649 +#. Progress stage 2/4 +#: src/modules/Security.rb:649 msgid "Write inittab settings" msgstr "inittab 설정 기록" -#. Progress stage 3/4 -#: src/modules/Security.rb:651 +#. Progress stage 3/4 +#: src/modules/Security.rb:651 msgid "Write PAM settings" msgstr "PAM 설정 기록" -#. Progress stage 4/4 -#: src/modules/Security.rb:653 +#. Progress stage 4/4 +#: src/modules/Security.rb:653 msgid "Update system settings" msgstr "시스템 설정 업데이트" -#. Progress step 1/5 -#: src/modules/Security.rb:657 +#. Progress step 1/5 +#: src/modules/Security.rb:657 msgid "Writing security settings..." msgstr "보안 설정을 기록하는 중..." -#. Progress step 2/5 -#: src/modules/Security.rb:659 +#. Progress step 2/5 +#: src/modules/Security.rb:659 msgid "Writing inittab settings..." msgstr "inittab 설정을 기록하는 중..." -#. Progress step 3/5 -#: src/modules/Security.rb:661 +#. Progress step 3/5 +#: src/modules/Security.rb:661 msgid "Writing PAM settings..." msgstr "PAM 설정을 기록하는 중..." -#. Progress step 4/5 -#: src/modules/Security.rb:663 +#. Progress step 4/5 +#: src/modules/Security.rb:663 msgid "Updating system settings..." msgstr "시스템 설정을 업데이트하는 중입니다." -#. Progress step 5/5 -#: src/modules/Security.rb:665 +#. Progress step 5/5 +#: src/modules/Security.rb:665 msgid "Finished" msgstr "완료됨" -#. Summary text -#: src/modules/Security.rb:754 +#. Summary text +#: src/modules/Security.rb:754 msgid "Current Security Level: Custom settings" msgstr "현재 보안 레벨: 사용자 설정" -#. Summary text -#: src/modules/Security.rb:758 +#. Summary text +#: src/modules/Security.rb:758 msgid "Current Security Level: %1" msgstr "현재 보안 레벨: %1" Modified: branches/SLE12-SP3/yast/ko/po/services-manager.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/services-manager.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/services-manager.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,120 +14,99 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#: src/clients/default_target_finish.rb:30 +#: src/clients/default_target_finish.rb:30 msgid "Saving default systemd target..." msgstr "기본 systemd 대상을 저장하는 중..." -#: src/clients/default_target_proposal.rb:26 +#: src/clients/default_target_proposal.rb:26 msgid "VNC needs graphical system to be available" msgstr "VNC를 사용하려면 그래픽 시스템이 필요합니다." -#. TODO implement behaviour if force_reset parameter provided -#: src/clients/default_target_proposal.rb:51 +#. TODO implement behaviour if force_reset parameter provided +#: src/clients/default_target_proposal.rb:51 msgid "&Default systemd target" msgstr "기본 systemd 대상(&D)" -#: src/clients/default_target_proposal.rb:52 +#: src/clients/default_target_proposal.rb:52 msgid "Default systemd target" msgstr "기본 systemd 대상" -#. create the proposal dialog and get the sequence symbol from block -#: src/clients/default_target_proposal.rb:116 +#. create the proposal dialog and get the sequence symbol from block +#: src/clients/default_target_proposal.rb:116 msgid "Set Default Systemd Target" msgstr "기본 Systemd 대상 설정" -#: src/clients/default_target_proposal.rb:134 +#: src/clients/default_target_proposal.rb:134 msgid "Selecting the Default Systemd Target" msgstr "기본 Systemd 대상 선택" -#: src/clients/default_target_proposal.rb:136 -msgid "" -"Systemd is a system and service manager for Linux. It consists of units " -"whose job is to activate services and other units." -msgstr "" -"Systemd는 Linux용 시스템 및 서비스 관리자입니다. 서비스 활성화가 업무인 단위" -"와 기타 단위로 구성됩니다." +#: src/clients/default_target_proposal.rb:136 +msgid "Systemd is a system and service manager for Linux. It consists of units whose job is to activate services and other units." +msgstr "Systemd는 Linux용 시스템 및 서비스 관리자입니다. 서비스 활성화가 업무인 단위와 기타 단위로 구성됩니다." -#: src/clients/default_target_proposal.rb:139 -msgid "" -"Default target unit is activated on boot by default. Usually it is a symlink " -"located in path/etc/systemd/system/default.target . See more on systemd man " -"page." -msgstr "" -"기본 대상 단위는 부팅 시 기본적으로 활성화됩니다. 일반적으로 이 단위는 path/" -"etc/systemd/system/default.target에 있는 symlink입니다. 자세한 내용은 " -"systemd 사용자 지정 페이지를 참조하십시오." +#: src/clients/default_target_proposal.rb:139 +msgid "Default target unit is activated on boot by default. Usually it is a symlink located in path/etc/systemd/system/default.target . See more on systemd man page." +msgstr "기본 대상 단위는 부팅 시 기본적으로 활성화됩니다. 일반적으로 이 단위는 path/etc/systemd/system/default.target에 있는 symlink입니다. 자세한 내용은 systemd 사용자 지정 페이지를 참조하십시오." -#: src/clients/default_target_proposal.rb:143 -msgid "" -"Multi-User target is for setting up a non-graphical multi-user system with " -"network suitable for server (similar to runlevel 3)." -msgstr "" -"여러 사용자 대상은 서버에 적합한 네트워크를 사용하여 비그래픽 여러 사용자 시" -"스템을 설정하기 위한 것입니다(실행 수준 3과 유사)." +#: src/clients/default_target_proposal.rb:143 +msgid "Multi-User target is for setting up a non-graphical multi-user system with network suitable for server (similar to runlevel 3)." +msgstr "여러 사용자 대상은 서버에 적합한 네트워크를 사용하여 비그래픽 여러 사용자 시스템을 설정하기 위한 것입니다(실행 수준 3과 유사)." -#: src/clients/default_target_proposal.rb:146 -msgid "" -"Graphical target for setting up a graphical login screen with network which " -"is typical for workstations (similar to runlevel 5)." -msgstr "" -"워크스테이션에 일반적인 네트워크를 사용하여 그래픽 로그인 화면을 설정하기 위" -"한 그래픽 대상입니다(실행 수준 5와 유사)." +#: src/clients/default_target_proposal.rb:146 +msgid "Graphical target for setting up a graphical login screen with network which is typical for workstations (similar to runlevel 5)." +msgstr "워크스테이션에 일반적인 네트워크를 사용하여 그래픽 로그인 화면을 설정하기 위한 그래픽 대상입니다(실행 수준 5와 유사)." -#: src/clients/default_target_proposal.rb:149 -msgid "" -"When you are not sure what would be the best option for you then go with " -"graphical target." +#: src/clients/default_target_proposal.rb:149 +msgid "When you are not sure what would be the best option for you then go with graphical target." msgstr "최적의 옵션이 무엇일지 확실하지 않으면 그래픽 대상을 사용하십시오." -#: src/clients/default_target_proposal.rb:160 +#: src/clients/default_target_proposal.rb:160 msgid "Available Targets" msgstr "사용 가능한 대상" -#. Check if the user forced a particular target before; if he did and the -#. autodetection recommends a different one now, warn the user about this -#. and keep the default target unchanged. -#: src/clients/default_target_proposal.rb:220 +#. Check if the user forced a particular target before; if he did and the +#. autodetection recommends a different one now, warn the user about this +#. and keep the default target unchanged. +#: src/clients/default_target_proposal.rb:220 msgid "The installer is recommending you the default target '%s' " msgstr "설치 관리자에서는 기본 대상 '%s'을(를) 권장합니다. " -#: src/clients/default_target_proposal.rb:232 +#: src/clients/default_target_proposal.rb:232 msgid "X11 packages have been selected for installation" msgstr "X11 패키지를 설치하도록 선택했습니다." -#: src/clients/default_target_proposal.rb:235 +#: src/clients/default_target_proposal.rb:235 msgid "Live Installation is typically used for full GUI in target system" msgstr "대상 시스템의 전체 GUI에는 라이브 설치가 일반적으로 사용됩니다." -#: src/clients/default_target_proposal.rb:238 +#: src/clients/default_target_proposal.rb:238 msgid "Serial connection does typically not support GUI" msgstr "직렬 연결에서는 일반적으로 GUI를 지원하지 않습니다." -#: src/clients/default_target_proposal.rb:242 +#: src/clients/default_target_proposal.rb:242 msgid "Text mode installation assumes no GUI on the target system" msgstr "텍스트 모드 설치에서는 대상 시스템에 GUI가 없다고 간주합니다." -#: src/clients/default_target_proposal.rb:245 -#: src/clients/default_target_proposal.rb:249 +#: src/clients/default_target_proposal.rb:245 +#: src/clients/default_target_proposal.rb:249 msgid "Using VNC assumes a GUI on the target system" msgstr "VNC를 사용하면 대상 시스템에서 GUI가 있는 것으로 간주됩니다." -#: src/clients/default_target_proposal.rb:252 +#: src/clients/default_target_proposal.rb:252 msgid "SSH installation mode assumes no GUI on the target system" msgstr "SSH 설치 모드에서는 대상 시스템에 GUI가 없다고 간주합니다." -#: src/clients/default_target_proposal.rb:255 +#: src/clients/default_target_proposal.rb:255 msgid "X11 packages have not been selected for installation" msgstr "X11 패키지를 설치하도록 선택하지 않았습니다." -#: src/clients/default_target_proposal.rb:258 -msgid "" -"This recommendation is based on the analysis of other installation settings" +#: src/clients/default_target_proposal.rb:258 +msgid "This recommendation is based on the analysis of other installation settings" msgstr "이 권장 사항은 다른 설치 설정에 대한 분석을 토대로 제공됩니다." -#. translators: command line help text for services-manager module -#. translators: command line help text for services-manager module -#: src/clients/services-manager.rb:29 src/clients/services.rb:29 +#. translators: command line help text for services-manager module +#. translators: command line help text for services-manager module +#: src/clients/services-manager.rb:29 src/clients/services.rb:29 msgid "" "Systemd target and services configuration module.\n" "Use systemctl for commandline services configuration." @@ -135,118 +114,114 @@ "시스템 대상 및 서비스 구성 모듈.\n" "명령줄 서비스 구성을 위해 systemctl을 사용하십시오." -#. Default for double-click in the table -#. Default for double-click in the table -#: src/clients/services-manager.rb:89 src/clients/services.rb:89 +#. Default for double-click in the table +#. Default for double-click in the table +#: src/clients/services-manager.rb:89 src/clients/services.rb:89 msgid "Writing configuration..." msgstr "구성을 쓰는 중..." -#: src/clients/services-manager.rb:94 src/clients/services.rb:94 +#: src/clients/services-manager.rb:94 src/clients/services.rb:94 msgid "Writing the configuration failed:\n" msgstr "실패한 구성을 쓰는 중:\n" -#. Additional space for UI features -#. Additional space for UI features -#: src/clients/services-manager.rb:131 src/clients/services.rb:131 +#. Additional space for UI features +#. Additional space for UI features +#: src/clients/services-manager.rb:131 src/clients/services.rb:131 msgid "Default System &Target" msgstr "기본 시스템 대상(&T)" -#: src/clients/services-manager.rb:142 src/clients/services.rb:142 +#: src/clients/services-manager.rb:142 src/clients/services.rb:142 msgid "Service" msgstr "서비스" -#: src/clients/services-manager.rb:143 src/clients/services-manager.rb:172 -#: src/clients/services-manager.rb:187 src/clients/services.rb:143 -#: src/clients/services.rb:172 src/clients/services.rb:187 -#: src/data/services-manager/autoyast_summary.erb:16 +#: src/clients/services-manager.rb:143 src/clients/services-manager.rb:172 +#: src/clients/services-manager.rb:187 src/clients/services.rb:143 +#: src/clients/services.rb:172 src/clients/services.rb:187 +#: src/data/services-manager/autoyast_summary.erb:16 msgid "Enabled" msgstr "활성화됨" -#. The current state matches the futural state -#. The current state matches the futural state -#: src/clients/services-manager.rb:144 src/clients/services-manager.rb:173 -#: src/clients/services-manager.rb:197 src/clients/services.rb:144 -#: src/clients/services.rb:173 src/clients/services.rb:197 +#. The current state matches the futural state +#. The current state matches the futural state +#: src/clients/services-manager.rb:144 src/clients/services-manager.rb:173 +#: src/clients/services-manager.rb:197 src/clients/services.rb:144 +#: src/clients/services.rb:173 src/clients/services.rb:197 msgid "Active" msgstr "활성" -#: src/clients/services-manager.rb:145 src/clients/services.rb:145 +#: src/clients/services-manager.rb:145 src/clients/services.rb:145 msgid "Description" msgstr "설명" -#: src/clients/services-manager.rb:150 src/clients/services.rb:150 +#: src/clients/services-manager.rb:150 src/clients/services.rb:150 msgid "&Start/Stop" msgstr "시작/정지(&S)" -#: src/clients/services-manager.rb:152 src/clients/services.rb:152 +#: src/clients/services-manager.rb:152 src/clients/services.rb:152 msgid "&Enable/Disable" msgstr "활성화/비활성화(&E)" -#: src/clients/services-manager.rb:154 src/clients/services.rb:154 +#: src/clients/services-manager.rb:154 src/clients/services.rb:154 msgid "Show &Details" msgstr "자세히 보기(&D)" -#: src/clients/services-manager.rb:157 src/clients/services.rb:157 -#: src/data/services-manager/autoyast_summary.erb:5 +#: src/clients/services-manager.rb:157 src/clients/services.rb:157 +#: src/data/services-manager/autoyast_summary.erb:5 msgid "Services Manager" msgstr "서비스 관리자" -#. Redraws the services dialog -#. Redraws the services dialog -#: src/clients/services-manager.rb:168 src/clients/services.rb:168 +#. Redraws the services dialog +#. Redraws the services dialog +#: src/clients/services-manager.rb:168 src/clients/services.rb:168 msgid "Reading services status..." msgstr "서비스 상태를 읽는 중..." -#: src/clients/services-manager.rb:172 src/clients/services-manager.rb:187 -#: src/clients/services.rb:172 src/clients/services.rb:187 -#: src/data/services-manager/autoyast_summary.erb:23 +#: src/clients/services-manager.rb:172 src/clients/services-manager.rb:187 +#: src/clients/services.rb:172 src/clients/services.rb:187 +#: src/data/services-manager/autoyast_summary.erb:23 msgid "Disabled" msgstr "비활성화" -#: src/clients/services-manager.rb:173 src/clients/services-manager.rb:197 -#: src/clients/services.rb:173 src/clients/services.rb:197 +#: src/clients/services-manager.rb:173 src/clients/services-manager.rb:197 +#: src/clients/services.rb:173 src/clients/services.rb:197 msgid "Inactive" msgstr "비활성" -#. The current state differs the the futural state -#. The current state differs the the futural state -#: src/clients/services-manager.rb:204 src/clients/services.rb:204 +#. The current state differs the the futural state +#. The current state differs the the futural state +#: src/clients/services-manager.rb:204 src/clients/services.rb:204 msgid "Active (will start)" msgstr "활성(시작됨)" -#: src/clients/services-manager.rb:204 src/clients/services.rb:204 +#: src/clients/services-manager.rb:204 src/clients/services.rb:204 msgid "Inactive (will stop)" msgstr "비활성(정지됨)" -#. Opens up a popup with details about the currently selected service -#. Opens up a popup with details about the currently selected service -#: src/clients/services-manager.rb:225 src/clients/services.rb:225 +#. Opens up a popup with details about the currently selected service +#. Opens up a popup with details about the currently selected service +#: src/clients/services-manager.rb:225 src/clients/services.rb:225 msgid "Service %{service} Full Info" msgstr "서비스 %{service} 전체 정보" -#. Toggles (enable/disable) whether the currently selected service should -#. be enabled or disabled while writing the configuration -#. Toggles (enable/disable) whether the currently selected service should -#. be enabled or disabled while writing the configuration -#: src/clients/services-manager.rb:258 src/clients/services.rb:258 -msgid "" -"This service cannot be enabled/disabled because it has no \"install\" " -"section in the description file" -msgstr "" -"이 서비스는 설명 파일에 \"설치\" 섹션이 없기 때문에 활성화/비활성화할 수 없습" -"니다." +#. Toggles (enable/disable) whether the currently selected service should +#. be enabled or disabled while writing the configuration +#. Toggles (enable/disable) whether the currently selected service should +#. be enabled or disabled while writing the configuration +#: src/clients/services-manager.rb:258 src/clients/services.rb:258 +msgid "This service cannot be enabled/disabled because it has no \"install\" section in the description file" +msgstr "이 서비스는 설명 파일에 \"설치\" 섹션이 없기 때문에 활성화/비활성화할 수 없습니다." -#. TODO implement behaviour if force_reset parameter provided -#: src/clients/services_proposal.rb:52 +#. TODO implement behaviour if force_reset parameter provided +#: src/clients/services_proposal.rb:52 msgid "&Services" msgstr "서비스(&S)" -#: src/clients/services_proposal.rb:53 -#: src/data/services-manager/autoyast_summary.erb:15 +#: src/clients/services_proposal.rb:53 +#: src/data/services-manager/autoyast_summary.erb:15 msgid "Services" msgstr "서비스" -#: src/clients/services_proposal.rb:116 +#: src/clients/services_proposal.rb:116 msgid "" "<p><big><b>Services</b></big><br>\n" "The current setup does not provide any functionality now.</p>" @@ -254,14 +229,12 @@ "<p><big><b>서비스</b></big><br>\n" "현재 설정이 지금 사용하고 있는 기능을 제공하지 않습니다.</p>" -#: src/clients/services_proposal.rb:121 +#: src/clients/services_proposal.rb:121 msgid "" "<p><big><b>Services</b></big><br>\n" -"This installation proposal allows you to start and enable a service from " -"the \n" +"This installation proposal allows you to start and enable a service from the \n" " list of services.</p>\n" -"<p>It may also open ports in the firewall for a service if firewall is " -"enabled\n" +"<p>It may also open ports in the firewall for a service if firewall is enabled\n" "and a particular service requires opening them.</p>\n" msgstr "" "<p><big><b>서비스</b></big><br>\n" @@ -270,21 +243,19 @@ "<p>방화벽이 활성화되었으며 특정 서비스에서 포트가 열려 있어야 하는 경우\n" "방화벽에서 포트를 열어야 할 수도 있습니다.</p>\n" -#: src/clients/services_proposal.rb:145 -msgid "" -"Service %service will be %toggled and port in firewall will be %switched " -"%link" +#: src/clients/services_proposal.rb:145 +msgid "Service %service will be %toggled and port in firewall will be %switched %link" msgstr "%service 서비스는 %toggled이고 방화벽의 포트는 %switched %link입니다." -#: src/clients/services_proposal.rb:160 +#: src/clients/services_proposal.rb:160 msgid "Service %service will be %toggled %link" msgstr "%service 서비스는 %toggled %link입니다." -#: src/clients/services_proposal.rb:258 +#: src/clients/services_proposal.rb:258 msgid "Package %1 is not available" msgstr "%1 패키지를 사용할 수 없습니다." -#: src/clients/services_proposal.rb:268 +#: src/clients/services_proposal.rb:268 msgid "" "Installation of required packages has failed; \n" "enabling and starting the services may also fail" @@ -292,66 +263,66 @@ "필수 패키지 설치에 실패했습니다. \n" "서비스 활성화 및 시작에 실패할 수도 있습니다." -#: src/clients/services_proposal.rb:283 +#: src/clients/services_proposal.rb:283 msgid "Cannot enable service %1" msgstr "%1 서비스를 활성화할 수 없습니다." -#: src/data/services-manager/autoyast_summary.erb:6 +#: src/data/services-manager/autoyast_summary.erb:6 msgid "Default Target" msgstr "기본 대상" -#. Name of the systemd default target unit. Suffix '.target' is optional. -#. @return [String] if the target has been specified in the profile. Can be nil. -#: src/lib/services-manager/services_manager_profile.rb:105 +#. Name of the systemd default target unit. Suffix '.target' is optional. +#. @return [String] if the target has been specified in the profile. Can be nil. +#: src/lib/services-manager/services_manager_profile.rb:105 msgid "Unknown autoyast services profile schema for 'services-manager'" msgstr "'services-manager'에 대해 알 수 없는 autoyast 서비스 프로파일 스키마" -#. AutoYast summary -#: src/modules/services_manager.rb:29 +#. AutoYast summary +#: src/modules/services_manager.rb:29 msgid "Not configured yet." msgstr "아직 구성되지 않았습니다." -#. Do not start or stop services that are already in the desired state. -#. They might be coming from AutoYast import and thus marked as :modified. -#: src/modules/services_manager_service.rb:452 +#. Do not start or stop services that are already in the desired state. +#. They might be coming from AutoYast import and thus marked as :modified. +#: src/modules/services_manager_service.rb:452 msgid "Could not %{change} %{service} which is currently %{status}. " msgstr "현재 %{status}인 %{service}을(를) %{change}할 수 없습니다. " -#: src/modules/services_manager_service.rb:471 +#: src/modules/services_manager_service.rb:471 msgid "Could not %{change} %{service}. " msgstr "%{service}을(를) %{change}할 수 없습니다. " -#. Default systemd target (previously: runlevel 5) option #1 -#: src/modules/services_manager_target.rb:20 +#. Default systemd target (previously: runlevel 5) option #1 +#: src/modules/services_manager_target.rb:20 msgid "Graphical mode" msgstr "그래픽 모드" -#. Default systemd target (previously: runlevel 3) option #2 -#: src/modules/services_manager_target.rb:22 +#. Default systemd target (previously: runlevel 3) option #2 +#: src/modules/services_manager_target.rb:22 msgid "Text mode" msgstr "텍스트 모드" -#. Systemd targets, bnc#892366 -#: src/modules/services_manager_target.rb:25 +#. Systemd targets, bnc#892366 +#: src/modules/services_manager_target.rb:25 msgid "Emergency Mode" msgstr "비상 모드" -#: src/modules/services_manager_target.rb:26 +#: src/modules/services_manager_target.rb:26 msgid "Graphical Interface" msgstr "그래픽 인터페이스" -#: src/modules/services_manager_target.rb:27 +#: src/modules/services_manager_target.rb:27 msgid "Initrd Default Target" msgstr "Initrd 기본 대상" -#: src/modules/services_manager_target.rb:28 +#: src/modules/services_manager_target.rb:28 msgid "Switch Root" msgstr "루트 전환" -#: src/modules/services_manager_target.rb:29 +#: src/modules/services_manager_target.rb:29 msgid "Multi-User System" msgstr "여러 사용자 시스템" -#: src/modules/services_manager_target.rb:30 +#: src/modules/services_manager_target.rb:30 msgid "Rescue Mode" msgstr "복구 모드" Modified: branches/SLE12-SP3/yast/ko/po/slp-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/slp-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/slp-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,141 +14,141 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xslp-server module -#: src/clients/slp-server.rb:35 +#. Command line help text for the Xslp-server module +#: src/clients/slp-server.rb:35 msgid "Configuration of an SLP server" msgstr "SLP 서버의 구성" -#. Rich text title for SlpServer in proposals -#: src/clients/slp-server_proposal.rb:64 +#. Rich text title for SlpServer in proposals +#: src/clients/slp-server_proposal.rb:64 msgid "SLP Server" msgstr "SLP 서버" -#. Menu title for SlpServer in proposals -#: src/clients/slp-server_proposal.rb:68 +#. Menu title for SlpServer in proposals +#: src/clients/slp-server_proposal.rb:68 msgid "&SLP Server" msgstr "SLP 서버(&S)" -#. radio button (starting SLP service - option 1) -#: src/include/slp-server/dialogs.rb:49 +#. radio button (starting SLP service - option 1) +#: src/include/slp-server/dialogs.rb:49 msgid "When &Booting" msgstr "부팅 시(&B)" -#. radio button (starting SLP service - option 2) -#: src/include/slp-server/dialogs.rb:53 +#. radio button (starting SLP service - option 2) +#: src/include/slp-server/dialogs.rb:53 msgid "&Manually" msgstr "수동으로(&M)" -#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") -#: src/include/slp-server/dialogs.rb:59 +#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") +#: src/include/slp-server/dialogs.rb:59 msgid "When Booting" msgstr "부팅 시" -#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") -#: src/include/slp-server/dialogs.rb:61 +#. part of help text, used to describe radiobuttons (matching starting SLP service but without "&") +#: src/include/slp-server/dialogs.rb:61 msgid "Manually" msgstr "수동" -#. button for view log files -#: src/include/slp-server/dialogs.rb:73 src/include/slp-server/dialogs.rb:78 +#. button for view log files +#: src/include/slp-server/dialogs.rb:73 src/include/slp-server/dialogs.rb:78 msgid "Show Log" msgstr "로그를 보여줍니다" -#. button for expert settings (all config options) -#: src/include/slp-server/dialogs.rb:84 src/include/slp-server/dialogs.rb:89 +#. button for expert settings (all config options) +#: src/include/slp-server/dialogs.rb:84 src/include/slp-server/dialogs.rb:89 msgid "Expert Settings" msgstr "고급 설정" -#. response + scopes widget -#: src/include/slp-server/dialogs.rb:99 +#. response + scopes widget +#: src/include/slp-server/dialogs.rb:99 msgid "Response To" msgstr "다음에 응답" -#: src/include/slp-server/dialogs.rb:100 +#: src/include/slp-server/dialogs.rb:100 msgid "Broadcast" msgstr "브로드캐스트" -#: src/include/slp-server/dialogs.rb:101 +#: src/include/slp-server/dialogs.rb:101 msgid "Multicast" msgstr "멀티캐스트" -#: src/include/slp-server/dialogs.rb:102 +#: src/include/slp-server/dialogs.rb:102 msgid "DA Server" msgstr "DA 서버" -#: src/include/slp-server/dialogs.rb:107 +#: src/include/slp-server/dialogs.rb:107 msgid "Becomes DA Server" msgstr "DA 서버가 됨" -#: src/include/slp-server/dialogs.rb:112 +#: src/include/slp-server/dialogs.rb:112 msgid "&IP Addresses of DA Servers" msgstr "DA 서버의 IP 주소(&I)" -#: src/include/slp-server/dialogs.rb:113 +#: src/include/slp-server/dialogs.rb:113 msgid "&Scopes" msgstr "범위(&S)" -#: src/include/slp-server/dialogs.rb:132 +#: src/include/slp-server/dialogs.rb:132 msgid "SLP Server Settings" msgstr "SLP 서버 설정" -#. description map for tabs in overview dialog -#: src/include/slp-server/dialogs.rb:251 +#. description map for tabs in overview dialog +#: src/include/slp-server/dialogs.rb:251 msgid "Global SLP Configuration" msgstr "전역 SLP 구성" -#. Initialization dialog caption -#: src/include/slp-server/dialogs.rb:273 src/include/slp-server/wizards.rb:81 +#. Initialization dialog caption +#: src/include/slp-server/dialogs.rb:273 src/include/slp-server/wizards.rb:81 msgid "SLP Server Configuration" msgstr "SLP 서버 구성" -#: src/include/slp-server/dialogs.rb:288 +#: src/include/slp-server/dialogs.rb:288 msgid "Server Details" msgstr "서버 세부 사항" -#: src/include/slp-server/dialogs.rb:303 +#: src/include/slp-server/dialogs.rb:303 msgid "Static Configuration Files" msgstr "정적 구성 파일" -#: src/include/slp-server/dialogs.rb:667 +#: src/include/slp-server/dialogs.rb:667 msgid "Really delete this file?" msgstr "이 파일을 삭제하시겠습니까?" -#. translators: combo box for selsect module from installed unknown modules -#: src/include/slp-server/dialogs.rb:690 +#. translators: combo box for selsect module from installed unknown modules +#: src/include/slp-server/dialogs.rb:690 msgid "Name of New File" msgstr "새 파일의 이름" -#. UI::ChangeWidget(`id(`scope), `Enabled, false); -#: src/include/slp-server/dialogs.rb:866 +#. UI::ChangeWidget(`id(`scope), `Enabled, false); +#: src/include/slp-server/dialogs.rb:866 msgid "Scope and IP address must be inserted." msgstr "범위 및 IP 주소를 입력해야 합니다." -#: src/include/slp-server/dialogs.rb:872 +#: src/include/slp-server/dialogs.rb:872 msgid "Scope must be inserted." msgstr "범위를 입력해야 합니다." -#. SlpServer overview dialog caption -#: src/include/slp-server/dialogs.rb:883 +#. SlpServer overview dialog caption +#: src/include/slp-server/dialogs.rb:883 msgid "SLP Server Overview" msgstr "SLP 서버 개요" -#: src/include/slp-server/dialogs.rb:892 +#: src/include/slp-server/dialogs.rb:892 msgid "<h1>SLP Server</h1>" msgstr "<h1>SLP 서버</h1>" -#. dialog for expert settings -#: src/include/slp-server/dialogs.rb:929 +#. dialog for expert settings +#: src/include/slp-server/dialogs.rb:929 msgid "SLP Server Configuration--Expert Dialog" msgstr "SLP 서버 구성--고급 대화 상자" -#. edit reg file dialog -#: src/include/slp-server/dialogs.rb:957 +#. edit reg file dialog +#: src/include/slp-server/dialogs.rb:957 msgid "SLP Server Configuration--Edit .reg File" msgstr "SLP 서버 구성--.reg 파일 편집" -#. Read dialog help 1/2 -#: src/include/slp-server/helps.rb:17 +#. Read dialog help 1/2 +#: src/include/slp-server/helps.rb:17 msgid "" "<p><b><big>Initializing SLP Server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -156,8 +156,8 @@ "<p><b><big>SLP 서버 구성 초기화 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Read dialog help 2/2 -#: src/include/slp-server/helps.rb:21 +#. Read dialog help 2/2 +#: src/include/slp-server/helps.rb:21 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -165,8 +165,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단합니다.</p>\n" -#. Write dialog help 1/2 -#: src/include/slp-server/helps.rb:25 +#. Write dialog help 1/2 +#: src/include/slp-server/helps.rb:25 msgid "" "<p><b><big>Saving SLP Server Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -174,8 +174,8 @@ "<p><b><big>SLP 서버 구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...<br></p>\n" -#. Write dialog help 2/2 -#: src/include/slp-server/helps.rb:29 +#. Write dialog help 2/2 +#: src/include/slp-server/helps.rb:29 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -187,8 +187,8 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/slp-server/helps.rb:36 +#. Ovreview dialog help 1/3 +#: src/include/slp-server/helps.rb:36 msgid "" "<p><b><big>SLP Server Configuration Overview</big></b><br>\n" "Obtain an overview of installed SLP servers. Additionally\n" @@ -198,8 +198,8 @@ "설치된 SLP 서버의 개요를 볼 수 있습니다. 또한\n" " 구성을 편집할 수도 있습니다.<br></p>\n" -#. Ovreview dialog help 2/3 -#: src/include/slp-server/helps.rb:42 +#. Ovreview dialog help 2/3 +#: src/include/slp-server/helps.rb:42 msgid "" "<p><b><big>Adding an SLP Server</big></b><br>\n" "Press <b>Add</b> to configure an SLP server.</p>\n" @@ -207,8 +207,8 @@ "<p><b><big>SLP 서버 추가</big></b><br>\n" "SLP 서버를 구성하려면 <b>추가</b>를 누르십시오.</p>\n" -#. Ovreview dialog help 3/3 -#: src/include/slp-server/helps.rb:46 +#. Ovreview dialog help 3/3 +#: src/include/slp-server/helps.rb:46 msgid "" "<p><b><big>Editing or Deleting</big></b><br>\n" "Choose an SLP server to change or remove.\n" @@ -218,8 +218,8 @@ "변경 또는 제거할 SLP 서버를 선택하십시오.\n" " 그런 다음 <b>편집</b> 또는 <b>삭제</b>를 누르십시오.</p>\n" -#. Configure1 dialog help 1/2 -#: src/include/slp-server/helps.rb:52 +#. Configure1 dialog help 1/2 +#: src/include/slp-server/helps.rb:52 msgid "" "<p><b><big>Configuration Part One</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -229,9 +229,9 @@ "<b>다음</b>을 눌러 계속하십시오.\n" "<br></p>" -#. Configure1 dialog help 2/2 -#. Configure2 dialog help 2/2 -#: src/include/slp-server/helps.rb:58 src/include/slp-server/helps.rb:70 +#. Configure1 dialog help 2/2 +#. Configure2 dialog help 2/2 +#: src/include/slp-server/helps.rb:58 src/include/slp-server/helps.rb:70 msgid "" "<p><b><big>Selecting Something</big></b><br>\n" "It is not possible. You must code it first. :-)\n" @@ -241,8 +241,8 @@ "선택할 수 없습니다. 먼저 코딩을 해야 합니다.\n" " </p>" -#. Configure2 dialog help 1/2 -#: src/include/slp-server/helps.rb:64 +#. Configure2 dialog help 1/2 +#: src/include/slp-server/helps.rb:64 msgid "" "<p><b><big>Configuration Part Two</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -252,150 +252,132 @@ "<b>다음</b>을 눌러 계속하십시오.\n" "<br></p>\n" -#: src/include/slp-server/helps.rb:75 +#: src/include/slp-server/helps.rb:75 msgid "<p>To show the slpd log file, use <b>Show Log</b>.</p>" -msgstr "" -"<p>slpd 로그 파일을 표시하려면 <b>로그를 보여줍니다.</b>를 사용하십시오.</p>" +msgstr "<p>slpd 로그 파일을 표시하려면 <b>로그를 보여줍니다.</b>를 사용하십시오.</p>" -#: src/include/slp-server/helps.rb:78 +#: src/include/slp-server/helps.rb:78 msgid "" -"<p>Here, set the mode in which to run the SLP daemon. The simplest mode is " -"<b>Broadcast</b>.\n" -"In it, the SLP daemon answers all requests sent by broadcast. The next mode " -"is <b>Multicast</b>. In it, the daemon answers queries\n" -"sent by multicast in appropriate SCOPES. In the <b>DA Server</b> mode, it " -"informs DA servers on the specified IP addresses\n" -"about statically and dynamically registered services. The last options is " -"<b>Becomes DA Server</b>. This is a cache server for service\n" +"<p>Here, set the mode in which to run the SLP daemon. The simplest mode is <b>Broadcast</b>.\n" +"In it, the SLP daemon answers all requests sent by broadcast. The next mode is <b>Multicast</b>. In it, the daemon answers queries\n" +"sent by multicast in appropriate SCOPES. In the <b>DA Server</b> mode, it informs DA servers on the specified IP addresses\n" +"about statically and dynamically registered services. The last options is <b>Becomes DA Server</b>. This is a cache server for service\n" "answers.</p>\n" msgstr "" -"<p>여기서는 SLP 데몬을 실행할 모드를 설정하십시오. 가장 간단한 모드는 <b>브로" -"드캐스트</b>입니다.\n" -"이 모드에서는 SLP 데몬이 브로드캐스트에서 전송된 모든 요청에 응답합니다. 다" -"음 모드는 <b>멀티캐스트</b>입니다. 이 모드에서는 데몬이 해당 SCOPES의 멀티캐" -"스트에 의해 전송된\n" +"<p>여기서는 SLP 데몬을 실행할 모드를 설정하십시오. 가장 간단한 모드는 <b>브로드캐스트</b>입니다.\n" +"이 모드에서는 SLP 데몬이 브로드캐스트에서 전송된 모든 요청에 응답합니다. 다음 모드는 <b>멀티캐스트</b>입니다. 이 모드에서는 데몬이 해당 SCOPES의 멀티캐스트에 의해 전송된\n" "쿼리에 응답합니다. <b>DA 서버</b> 모드에서는 지정된 IP 주소의 DA 서버에\n" -"고정적 및 동적으로 등록된 서비스에 대해 알립니다. 마지막 옵션은 <b>DA 서버가 " -"됨</b>입니다. 서비스 응답을 위한\n" +"고정적 및 동적으로 등록된 서비스에 대해 알립니다. 마지막 옵션은 <b>DA 서버가 됨</b>입니다. 서비스 응답을 위한\n" "캐시 서버입니다.</p>\n" -#: src/include/slp-server/helps.rb:85 -msgid "" -"<p>With <b>Expert Settings</b>, access all options available in /etc/slp." -"conf.</p>" -msgstr "" -"<p><b>고급 설정</b>에서는 /etc/slp.conf에서 사용할 수 있는 모든 옵션에 액세스" -"할 수 있습니다.</p>" +#: src/include/slp-server/helps.rb:85 +msgid "<p>With <b>Expert Settings</b>, access all options available in /etc/slp.conf.</p>" +msgstr "<p><b>고급 설정</b>에서는 /etc/slp.conf에서 사용할 수 있는 모든 옵션에 액세스할 수 있습니다.</p>" -#: src/include/slp-server/helps.rb:88 +#: src/include/slp-server/helps.rb:88 msgid "" -"Configuration files for static registration to SLP. With <b>Add</b>, create " -"a new empty file. With <b>Modify</b>,\n" -"change the values of any existing file. With <b>Delete</b>, it is possible " -"to delete files not owned by any package." +"Configuration files for static registration to SLP. With <b>Add</b>, create a new empty file. With <b>Modify</b>,\n" +"change the values of any existing file. With <b>Delete</b>, it is possible to delete files not owned by any package." msgstr "" -"SLP에 정적으로 등록하기 위한 구성 파일입니다. 빈 파일을 새로 만들려면 <b>추가" -"</b>를 사용합니다. 기존 파일 값을 변경하려면\n" -"<b>수정</b>을 사용합니다. <b>삭제</b>를 사용하면 패키지에서 소유하고 있지 않" -"은 파일을 삭제할 수 있습니다." +"SLP에 정적으로 등록하기 위한 구성 파일입니다. 빈 파일을 새로 만들려면 <b>추가</b>를 사용합니다. 기존 파일 값을 변경하려면\n" +"<b>수정</b>을 사용합니다. <b>삭제</b>를 사용하면 패키지에서 소유하고 있지 않은 파일을 삭제할 수 있습니다." -#: src/include/slp-server/helps.rb:91 +#: src/include/slp-server/helps.rb:91 msgid "Help for regedit" msgstr "regedit에 대한 도움말" -#. Initialization dialog contents -#: src/include/slp-server/wizards.rb:83 +#. Initialization dialog contents +#: src/include/slp-server/wizards.rb:83 msgid "Initializing..." msgstr "초기화 중..." -#. check for package openslp-server installed -#: src/modules/SlpServer.rb:181 -msgid "" -"<p>To configure the SLP server, the <b>%1</b> package must be installed.</p>" +#. check for package openslp-server installed +#: src/modules/SlpServer.rb:181 +msgid "<p>To configure the SLP server, the <b>%1</b> package must be installed.</p>" msgstr "<p>SLP 서버를 구성하려면 <b>%1</b> 패키지를 설치해야 합니다.</p>" -#: src/modules/SlpServer.rb:184 +#: src/modules/SlpServer.rb:184 msgid "<p>Do you want to install it now?</p>" msgstr "<p>지금 이것을 설치 하기 원하십니까?</p>" -#. SlpServer read dialog caption -#: src/modules/SlpServer.rb:199 +#. SlpServer read dialog caption +#: src/modules/SlpServer.rb:199 msgid "Initializing SLP Server Configuration" msgstr "SLP 서버 구성 초기화" -#. Progress stage 1/3 -#: src/modules/SlpServer.rb:215 +#. Progress stage 1/3 +#: src/modules/SlpServer.rb:215 msgid "Read the database" msgstr "데이타베이스 읽기" -#. Progress stage 2/3 -#: src/modules/SlpServer.rb:217 +#. Progress stage 2/3 +#: src/modules/SlpServer.rb:217 msgid "Read the previous settings" msgstr "이전의 설정 읽기" -#. Progress stage 3/3 -#: src/modules/SlpServer.rb:219 +#. Progress stage 3/3 +#: src/modules/SlpServer.rb:219 msgid "Detect the devices" msgstr "장치 검색" -#. Progress step 1/3 -#: src/modules/SlpServer.rb:223 +#. Progress step 1/3 +#: src/modules/SlpServer.rb:223 msgid "Reading the database..." msgstr "데이타베이스를 읽는 중..." -#. Progress step 2/3 -#: src/modules/SlpServer.rb:225 +#. Progress step 2/3 +#: src/modules/SlpServer.rb:225 msgid "Reading the previous settings..." msgstr "이전 설정을 읽는 중..." -#. Progress step 3/3 -#: src/modules/SlpServer.rb:227 +#. Progress step 3/3 +#: src/modules/SlpServer.rb:227 msgid "Detecting the devices..." msgstr "장치를 검색하고 중..." -#. Progress finished -#. Progress finished -#: src/modules/SlpServer.rb:229 src/modules/SlpServer.rb:302 +#. Progress finished +#. Progress finished +#: src/modules/SlpServer.rb:229 src/modules/SlpServer.rb:302 msgid "Finished" msgstr "완료됨" -#. read another database -#: src/modules/SlpServer.rb:253 +#. read another database +#: src/modules/SlpServer.rb:253 msgid "Cannot read database2." msgstr "database2를 읽을 수 없습니다." -#. SlpServer read dialog caption -#: src/modules/SlpServer.rb:276 +#. SlpServer read dialog caption +#: src/modules/SlpServer.rb:276 msgid "Saving SLP Server Configuration" msgstr "SLP 서버 구성 저장" -#. Progress stage 1/2 -#: src/modules/SlpServer.rb:292 +#. Progress stage 1/2 +#: src/modules/SlpServer.rb:292 msgid "Write the settings" msgstr "설정 기록" -#. Progress stage 2/2 -#: src/modules/SlpServer.rb:294 +#. Progress stage 2/2 +#: src/modules/SlpServer.rb:294 msgid "Run SuSEconfig" msgstr "SuSEconfig 실행" -#. Progress step 1/2 -#: src/modules/SlpServer.rb:298 +#. Progress step 1/2 +#: src/modules/SlpServer.rb:298 msgid "Writing the settings..." msgstr "설정을 기록하는 중..." -#. Progress step 2/2 -#: src/modules/SlpServer.rb:300 +#. Progress step 2/2 +#: src/modules/SlpServer.rb:300 msgid "Running SuSEconfig..." msgstr "SuSEconfig 실행중입니다..." -#. Error message -#: src/modules/SlpServer.rb:313 +#. Error message +#: src/modules/SlpServer.rb:313 msgid "Cannot write settings." msgstr "설정을 기록할 수 없습니다." -#. Create a textual summary and a list of unconfigured cards -#. @return summary of the current configuration -#: src/modules/SlpServer.rb:378 +#. Create a textual summary and a list of unconfigured cards +#. @return summary of the current configuration +#: src/modules/SlpServer.rb:378 msgid "Configuration summary..." msgstr "구성 요약..." Modified: branches/SLE12-SP3/yast/ko/po/slp.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/slp.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/slp.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -1,39 +1,38 @@ # Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg # This file is distributed under the same license as the package. -# -msgid "" -msgstr "" -"Project-Id-Version: slp\n" -"Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2016-10-10 15:34+0200\n" -"PO-Revision-Date: 2017-04-18 14:13\n" -"Last-Translator: Novell language \n" -"Language-Team: Novell language \n" -"Language: \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=UTF-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#. Constructor -#. -#. @param services [ArraySlpServiceClass::Service] list of services to show -#. @param heading [String] Dialog's heading. If nil (or not specified), a default -#. heading will be used). -#. @param description [String] Dialog's description (to be shown on top of the list). -#. If nil (or not specified) a default description will be used. -#. @param no_selected_msg [String] Message to be shown when no service was selected -#. If nil (or not specified) a default description will be used. -#. @param initial [SlpServiceClass::Service] initially selected service. If nil -#. (or not specified) the first service will be used. -#: src/lib/slp/dialogs/service_selection.rb:78 -msgid "Service selection" -msgstr "서비스 선택" - -#: src/lib/slp/dialogs/service_selection.rb:79 -msgid "Select a detected service from the list." -msgstr "목록에서 감지된 서비스를 선택하십시오." - -#: src/lib/slp/dialogs/service_selection.rb:80 -msgid "No service was selected." -msgstr "선택한 서비스가 없습니다." - +# +msgid "" +msgstr "" +"Project-Id-Version: slp\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2016-10-10 15:34+0200\n" +"PO-Revision-Date: 2017-04-18 14:13\n" +"Last-Translator: Novell language \n" +"Language-Team: Novell language \n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#. Constructor +#. +#. @param services [ArraySlpServiceClass::Service] list of services to show +#. @param heading [String] Dialog's heading. If nil (or not specified), a default +#. heading will be used). +#. @param description [String] Dialog's description (to be shown on top of the list). +#. If nil (or not specified) a default description will be used. +#. @param no_selected_msg [String] Message to be shown when no service was selected +#. If nil (or not specified) a default description will be used. +#. @param initial [SlpServiceClass::Service] initially selected service. If nil +#. (or not specified) the first service will be used. +#: src/lib/slp/dialogs/service_selection.rb:78 +msgid "Service selection" +msgstr "서비스 선택" + +#: src/lib/slp/dialogs/service_selection.rb:79 +msgid "Select a detected service from the list." +msgstr "목록에서 감지된 서비스를 선택하십시오." + +#: src/lib/slp/dialogs/service_selection.rb:80 +msgid "No service was selected." +msgstr "선택한 서비스가 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/smt.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/smt.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/smt.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,430 +14,430 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. TRANSLATORS: error message - the module does not provide command line interface -#. TRANSLATORS: error message - the module does not provide command line interface -#: src/clients/smt-server.rb:29 src/clients/smt.rb:29 +#. TRANSLATORS: error message - the module does not provide command line interface +#. TRANSLATORS: error message - the module does not provide command line interface +#: src/clients/smt-server.rb:29 src/clients/smt.rb:29 msgid "There is no user interface available for this module." msgstr "이 모듈에 대한 유저 인터페이스를 사용할 수 없습니다." -#. TRANSLATORS: error message -#: src/include/smt/complex.rb:53 +#. TRANSLATORS: error message +#: src/include/smt/complex.rb:53 msgid "No URL has been defined. Test cannot proceed." msgstr "URL이 정의되지 않았습니다. 테스트를 진행할 수 없습니다." -#. At first, credentials need to be written to a temporary file -#. because of security reasons. If used on a commandline, `ps` -#. could reveal them. -#. TRANSLATORS: LogView line -#: src/include/smt/complex.rb:68 +#. At first, credentials need to be written to a temporary file +#. because of security reasons. If used on a commandline, `ps` +#. could reveal them. +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:68 msgid "Creating a temporary file..." msgstr "임시 파일 생성 중..." -#. TRANSLATORS: LogView line -#: src/include/smt/complex.rb:94 +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:94 msgid "Cannot create a temporary file %1." msgstr "임시 파일 %1을(를) 생성할 수 없습니다." -#. TRANSLATORS: LogView line -#: src/include/smt/complex.rb:102 +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:102 msgid "Check credentials..." msgstr "자격 증명 확인..." -#. TRANSLATORS: LogView line -#: src/include/smt/complex.rb:115 +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:115 msgid "Invalid credentials." msgstr "잘못된 자격 증명입니다." -#. TRANSLATORS: LogView line -#: src/include/smt/complex.rb:121 +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:121 msgid "Success." msgstr "성공" -#. encoding: utf-8 -#. File: include/smt/dialogs.ycp -#. Package: Configuration of smt -#. Summary: Dialogs definitions -#. Authors: Lukas Ocilka -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/smt/dialogs.rb:40 +#. encoding: utf-8 +#. File: include/smt/dialogs.ycp +#. Package: Configuration of smt +#. Summary: Dialogs definitions +#. Authors: Lukas Ocilka +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/smt/dialogs.rb:40 msgid "SCC Registration" msgstr "SCC 등록" -#: src/include/smt/dialogs.rb:41 +#: src/include/smt/dialogs.rb:41 msgid "Synchronization of Updates" msgstr "업데이트 동기화" -#: src/include/smt/dialogs.rb:44 +#: src/include/smt/dialogs.rb:44 msgid "Generation of Reports" msgstr "보고서 생성" -#: src/include/smt/dialogs.rb:47 +#: src/include/smt/dialogs.rb:47 msgid "Job Queue Cleanup" msgstr "작업 대기열 정리" -#. Patch category -#: src/include/smt/dialogs.rb:111 +#. Patch category +#: src/include/smt/dialogs.rb:111 msgid "Recommended" msgstr "추천" -#. Patch category -#: src/include/smt/dialogs.rb:113 +#. Patch category +#: src/include/smt/dialogs.rb:113 msgid "Optional" msgstr "선택 사항" -#. Patch category -#: src/include/smt/dialogs.rb:115 +#. Patch category +#: src/include/smt/dialogs.rb:115 msgid "Security" msgstr "보안" -#. opposite to check-mark used in UI, usually not translated -#: src/include/smt/dialogs.rb:126 +#. opposite to check-mark used in UI, usually not translated +#: src/include/smt/dialogs.rb:126 msgid "-" msgstr "-" -#. Only some repositories support filtering, although -#. snapshots can be created from every repository -#: src/include/smt/dialogs.rb:153 +#. Only some repositories support filtering, although +#. snapshots can be created from every repository +#: src/include/smt/dialogs.rb:153 msgid "Package manager patches: %1" msgstr "패키지 관리자 패치: %1" -#: src/include/smt/dialogs.rb:154 +#: src/include/smt/dialogs.rb:154 msgid "Security patches: %1" msgstr "보안 패치: %1" -#: src/include/smt/dialogs.rb:155 +#: src/include/smt/dialogs.rb:155 msgid "Recommended patches: %1" msgstr "추천 패치: %1" -#: src/include/smt/dialogs.rb:156 +#: src/include/smt/dialogs.rb:156 msgid "Optional patches: %1" msgstr "선택 사항 패치: %1" -#: src/include/smt/dialogs.rb:166 +#: src/include/smt/dialogs.rb:166 msgid "Sunday" msgstr "일요일" -#: src/include/smt/dialogs.rb:167 +#: src/include/smt/dialogs.rb:167 msgid "Monday" msgstr "월요일" -#: src/include/smt/dialogs.rb:168 +#: src/include/smt/dialogs.rb:168 msgid "Tuesday" msgstr "화요일" -#: src/include/smt/dialogs.rb:169 +#: src/include/smt/dialogs.rb:169 msgid "Wednesday" msgstr "수요일" -#: src/include/smt/dialogs.rb:170 +#: src/include/smt/dialogs.rb:170 msgid "Thursday" msgstr "목요일" -#: src/include/smt/dialogs.rb:171 +#: src/include/smt/dialogs.rb:171 msgid "Friday" msgstr "금요일" -#: src/include/smt/dialogs.rb:172 +#: src/include/smt/dialogs.rb:172 msgid "Saturday" msgstr "토요일" -#. TRANSLATORS: check box -#: src/include/smt/dialogs.rb:191 +#. TRANSLATORS: check box +#: src/include/smt/dialogs.rb:191 msgid "&Enable Subscription Management Tool Service (SMT)" msgstr "SMT(Subscription Management Tool) 서비스 활성화(&E)" -#: src/include/smt/dialogs.rb:198 +#: src/include/smt/dialogs.rb:198 msgid "Customer Center Configuration" msgstr "고객 센터 구성" -#. TRANSLATORS: check box -#: src/include/smt/dialogs.rb:209 +#. TRANSLATORS: check box +#: src/include/smt/dialogs.rb:209 msgid "&Use Custom Server" msgstr "사용자 정의 서버 사용(&U)" -#. TRANSLATORS: text entry -#: src/include/smt/dialogs.rb:220 +#. TRANSLATORS: text entry +#: src/include/smt/dialogs.rb:220 msgid "&Registration Server Url" msgstr "등록 서버 URL(&R)" -#. TRANSLATORS: text entry -#: src/include/smt/dialogs.rb:228 +#. TRANSLATORS: text entry +#: src/include/smt/dialogs.rb:228 msgid "&Download Server Url" msgstr "다운로드 서버 URL(&D)" -#: src/include/smt/dialogs.rb:235 +#: src/include/smt/dialogs.rb:235 msgid "Organization (Mirroring) Credentials" msgstr "조직(미러링) 자격 증명" -#. TRANSLATORS: text entry (User name) -#: src/include/smt/dialogs.rb:243 +#. TRANSLATORS: text entry (User name) +#: src/include/smt/dialogs.rb:243 msgid "&User" msgstr "사용자(&U)" -#. TRANSLATORS: password entry -#: src/include/smt/dialogs.rb:251 +#. TRANSLATORS: password entry +#: src/include/smt/dialogs.rb:251 msgid "&Password" msgstr "비밀번호(&P)" -#. TRANSLATORS: push button -#: src/include/smt/dialogs.rb:261 +#. TRANSLATORS: push button +#: src/include/smt/dialogs.rb:261 msgid "&Test..." msgstr "테스트(&T)..." -#. TRANSLATORS: text entry (e-mail) -#: src/include/smt/dialogs.rb:274 +#. TRANSLATORS: text entry (e-mail) +#: src/include/smt/dialogs.rb:274 msgid "&SCC E-mail Used for Registration" msgstr "등록에 사용된 SCC 전자 메일(&S)" -#. TRANSLATORS: text entry (URL) -#: src/include/smt/dialogs.rb:284 +#. TRANSLATORS: text entry (URL) +#: src/include/smt/dialogs.rb:284 msgid "&Your SMT Server URL" msgstr "SMT 서버 URL(&Y)" -#. TRANSLATORS: password entry -#: src/include/smt/dialogs.rb:307 +#. TRANSLATORS: password entry +#: src/include/smt/dialogs.rb:307 msgid "Database &Password" msgstr "데이터베이스 비밀번호(&P)" -#. TRANSLATORS: password entry -#: src/include/smt/dialogs.rb:316 +#. TRANSLATORS: password entry +#: src/include/smt/dialogs.rb:316 msgid "C&onfirm Password" msgstr "비밀번호 확인(&O)" -#: src/include/smt/dialogs.rb:329 +#: src/include/smt/dialogs.rb:329 msgid "List of Scheduled Jobs" msgstr "예정된 작업 목록" -#: src/include/smt/dialogs.rb:334 +#: src/include/smt/dialogs.rb:334 msgid "Job to Run" msgstr "실행할 작업" -#. TRANSLATORS: table header item -#: src/include/smt/dialogs.rb:336 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:336 msgid "Frequency" msgstr "주파수" -#. TRANSLATORS: table header item -#: src/include/smt/dialogs.rb:338 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:338 msgid "Day of the Week" msgstr "요일" -#. TRANSLATORS: table header item -#: src/include/smt/dialogs.rb:340 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:340 msgid "Day of the Month" msgstr "날짜" -#. TRANSLATORS: table header item -#: src/include/smt/dialogs.rb:342 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:342 msgid "Hour" msgstr "시간" -#. TRANSLATORS: table header item -#: src/include/smt/dialogs.rb:344 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:344 msgid "Minute" msgstr "분" -#: src/include/smt/dialogs.rb:350 src/include/smt/dialogs.rb:372 +#: src/include/smt/dialogs.rb:350 src/include/smt/dialogs.rb:372 msgid "&Add..." msgstr "추가(&A)..." -#: src/include/smt/dialogs.rb:351 +#: src/include/smt/dialogs.rb:351 msgid "&Edit..." msgstr "편집(&E)..." -#: src/include/smt/dialogs.rb:367 +#: src/include/smt/dialogs.rb:367 msgid "E-mail addresses to send reports to" msgstr "보고서를 전송할 전자 메일 주소" -#: src/include/smt/dialogs.rb:393 +#: src/include/smt/dialogs.rb:393 msgid "All" msgstr "모두" -#: src/include/smt/dialogs.rb:419 src/include/smt/dialogs.rb:2031 +#: src/include/smt/dialogs.rb:419 src/include/smt/dialogs.rb:2031 msgid "Repository &Name" msgstr "리포지토리 이름(&N)" -#: src/include/smt/dialogs.rb:424 +#: src/include/smt/dialogs.rb:424 msgid "&Patch Category" msgstr "패치 범주(&P)" -#: src/include/smt/dialogs.rb:436 +#: src/include/smt/dialogs.rb:436 msgid "Patch Name" msgstr "패치 이름" -#: src/include/smt/dialogs.rb:437 +#: src/include/smt/dialogs.rb:437 msgid "Version" msgstr "버전" -#: src/include/smt/dialogs.rb:438 +#: src/include/smt/dialogs.rb:438 msgid "Category" msgstr "범주" -#: src/include/smt/dialogs.rb:439 +#: src/include/smt/dialogs.rb:439 msgid "Testing" msgstr "테스트 중" -#: src/include/smt/dialogs.rb:440 +#: src/include/smt/dialogs.rb:440 msgid "Production" msgstr "운영" -#: src/include/smt/dialogs.rb:441 +#: src/include/smt/dialogs.rb:441 msgid "Summary" msgstr "요약" -#: src/include/smt/dialogs.rb:446 +#: src/include/smt/dialogs.rb:446 msgid "Patch Details" msgstr "패치 세부 사항" -#: src/include/smt/dialogs.rb:453 +#: src/include/smt/dialogs.rb:453 msgid "&Toggle Patch Status" msgstr "패치 상태 토글(&T)" -#: src/include/smt/dialogs.rb:457 +#: src/include/smt/dialogs.rb:457 msgid "Change &Status" msgstr "상태 변경(&S)" -#: src/include/smt/dialogs.rb:459 +#: src/include/smt/dialogs.rb:459 msgid "&Exclude from Snapshot..." msgstr "스냅샷에서 제외(&E)..." -#: src/include/smt/dialogs.rb:463 +#: src/include/smt/dialogs.rb:463 msgid "&All listed..." msgstr "등록된 모든 항목(&A)..." -#: src/include/smt/dialogs.rb:465 +#: src/include/smt/dialogs.rb:465 msgid "&Enable" msgstr "활성화(&E)" -#: src/include/smt/dialogs.rb:466 +#: src/include/smt/dialogs.rb:466 msgid "&Disable" msgstr "비활성화(&D)" -#: src/include/smt/dialogs.rb:473 +#: src/include/smt/dialogs.rb:473 msgid "Create Snapshot..." msgstr "스냅샷 생성..." -#: src/include/smt/dialogs.rb:477 +#: src/include/smt/dialogs.rb:477 msgid "From Full Mirror to &Testing" msgstr "전체 미러에서 테스팅으로(&T)" -#: src/include/smt/dialogs.rb:481 +#: src/include/smt/dialogs.rb:481 msgid "From Testing to &Production" msgstr "테스팅에서 운영으로(&P)" -#: src/include/smt/dialogs.rb:493 +#: src/include/smt/dialogs.rb:493 msgid "Repository Filter" msgstr "리포지토리 필터" -#: src/include/smt/dialogs.rb:496 +#: src/include/smt/dialogs.rb:496 msgid "Filter" msgstr "필터" -#: src/include/smt/dialogs.rb:504 +#: src/include/smt/dialogs.rb:504 msgid "Name" msgstr "이름" -#: src/include/smt/dialogs.rb:505 +#: src/include/smt/dialogs.rb:505 msgid "Target" msgstr "대상" -#: src/include/smt/dialogs.rb:506 +#: src/include/smt/dialogs.rb:506 msgid "Mirroring" msgstr "미러링" -#. TRANSLATORS: tab-header -#: src/include/smt/dialogs.rb:507 src/include/smt/wizard.rb:186 +#. TRANSLATORS: tab-header +#: src/include/smt/dialogs.rb:507 src/include/smt/wizard.rb:186 msgid "Staging" msgstr "스테이징" -#: src/include/smt/dialogs.rb:508 +#: src/include/smt/dialogs.rb:508 msgid "Mirrored" msgstr "미러링됨" -#: src/include/smt/dialogs.rb:509 +#: src/include/smt/dialogs.rb:509 msgid "Description" msgstr "설명" -#: src/include/smt/dialogs.rb:515 +#: src/include/smt/dialogs.rb:515 msgid "Toggle &Mirroring" msgstr "미러링 토글(&M)" -#: src/include/smt/dialogs.rb:516 +#: src/include/smt/dialogs.rb:516 msgid "Toggle &Staging" msgstr "스테이징 토글(&S)" -#: src/include/smt/dialogs.rb:518 +#: src/include/smt/dialogs.rb:518 msgid "Mirror &Now" msgstr "지금 미러링(&N)" -#: src/include/smt/dialogs.rb:530 +#: src/include/smt/dialogs.rb:530 msgid "Status" msgstr "상태" -#: src/include/smt/dialogs.rb:530 +#: src/include/smt/dialogs.rb:530 msgid "Host Name" msgstr "호스트 이름" -#: src/include/smt/dialogs.rb:530 +#: src/include/smt/dialogs.rb:530 msgid "Last Contact" msgstr "마지막 접속" -#. TRANSLATORS: Dialog caption -#. TRANSLATORS: Dialog caption -#: src/include/smt/dialogs.rb:543 src/include/smt/dialogs.rb:973 +#. TRANSLATORS: Dialog caption +#. TRANSLATORS: Dialog caption +#: src/include/smt/dialogs.rb:543 src/include/smt/dialogs.rb:973 msgid "Initializing SMT Configuration" msgstr "SMT 구성 초기화 중" -#. TRANSLATORS: Progress stage -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:548 src/include/smt/dialogs.rb:979 +#. TRANSLATORS: Progress stage +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:548 src/include/smt/dialogs.rb:979 msgid "Read SMT configuration" msgstr "SMT 구성 읽기" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:550 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:550 msgid "Read SMT status" msgstr "SMT 상태 읽기" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:552 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:552 msgid "Read firewall settings" msgstr "방화벽 설정 읽기" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:554 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:554 msgid "Read cron settings" msgstr "cron 설정 읽기" -#. TRANSLATORS: Bussy message /progress/ -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:558 src/include/smt/dialogs.rb:983 +#. TRANSLATORS: Bussy message /progress/ +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:558 src/include/smt/dialogs.rb:983 msgid "Reading SMT configuration..." msgstr "SMT 구성 읽는 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:560 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:560 msgid "Reading SMT status..." msgstr "SMT 상태를 읽는 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:562 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:562 msgid "Reading firewall settings..." msgstr "방화벽 설정 읽는 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:564 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:564 msgid "Reading cron settings..." msgstr "cron 설정 읽는 중..." -#. Dialog caption -#: src/include/smt/dialogs.rb:610 +#. Dialog caption +#: src/include/smt/dialogs.rb:610 msgid "SCC Credentials" msgstr "SCC 자격 증명" -#. Informative text -#: src/include/smt/dialogs.rb:615 +#. Informative text +#: src/include/smt/dialogs.rb:615 msgid "" "System does not appear to be registered in SCC.\n" "Choose one of the options below." @@ -445,18 +445,18 @@ "시스템이 SCC에 등록된 것 같지 않습니다.\n" "아래 옵션 중 하나를 선택하십시오." -#. Radio button -#: src/include/smt/dialogs.rb:631 +#. Radio button +#: src/include/smt/dialogs.rb:631 msgid "&Skip Registration" msgstr "등록 건너뛰기(&S)" -#. Radio button -#: src/include/smt/dialogs.rb:640 +#. Radio button +#: src/include/smt/dialogs.rb:640 msgid "Register in &SUSE Customer Center" msgstr "SUSE 고객 센터에 등록(&S)" -#. Help "SCC Credentials", #1 -#: src/include/smt/dialogs.rb:650 +#. Help "SCC Credentials", #1 +#: src/include/smt/dialogs.rb:650 msgid "" "<p><b><big>SCC Credentials</big></b><br>\n" "You need to register your SMT in SUSE Customer Center to get it working\n" @@ -466,8 +466,8 @@ "SMT를 SUSE 고객 센터에 등록해야 제대로\n" "작동합니다. 열거한 옵션 중 하나를 선택하십시오.</p>" -#. Help "SCC Credentials", #2 -#: src/include/smt/dialogs.rb:656 +#. Help "SCC Credentials", #2 +#: src/include/smt/dialogs.rb:656 msgid "" "<p>Choosing <b>Register in SUSE Customer Center</b> would\n" "call regular SUSE Customer Center Configuration module,\n" @@ -479,13 +479,13 @@ "<b>신규 SCC 자격 증명 생성</b>을 선택하면 SUSE 고객 센터 구성 모듈을\n" "호출하지 않고 새로운 SCC 자격 증명만 생성합니다.</p>" -#. Pop-up dialog caption -#: src/include/smt/dialogs.rb:685 +#. Pop-up dialog caption +#: src/include/smt/dialogs.rb:685 msgid "Warning" msgstr "경고" -#. Pop-up question -#: src/include/smt/dialogs.rb:687 +#. Pop-up question +#: src/include/smt/dialogs.rb:687 msgid "" "Leaving the SCC credentials empty might cause SMT not to work properly.\n" "Are you sure you want to really skip it?" @@ -493,18 +493,18 @@ "SCC 자격 증명을 비워 두면 SMT가 제대로 작동하지 않을 수 있습니다.\n" "정말로 건너뛰시겠습니까?" -#. Button label -#: src/include/smt/dialogs.rb:691 +#. Button label +#: src/include/smt/dialogs.rb:691 msgid "&Yes, Skip It" msgstr "예, 건너뜁니다(&Y)" -#. Button label -#: src/include/smt/dialogs.rb:693 +#. Button label +#: src/include/smt/dialogs.rb:693 msgid "&Cancel" msgstr "취소(&C)" -#. Pop-up error message, %1 is replaced with file name, %2 with username -#: src/include/smt/dialogs.rb:767 +#. Pop-up error message, %1 is replaced with file name, %2 with username +#: src/include/smt/dialogs.rb:767 msgid "" "SMT is unable to set %1 file permissions\n" "to be readable by %2 user." @@ -512,8 +512,8 @@ "SMT가 %1 파일 권한을\n" "%2 사용자가 읽을 수 있도록 설정할 수 없습니다." -#. Pop-up error message, %1 is replaced with directory name, %2 with username -#: src/include/smt/dialogs.rb:784 +#. Pop-up error message, %1 is replaced with directory name, %2 with username +#: src/include/smt/dialogs.rb:784 msgid "" "SMT is unable to set %1 directory permission\n" "to be recursively writable by %2 user." @@ -521,10 +521,10 @@ "SMT가 %1 디렉토리 권한을\n" "%2 사용자가 반복 쓰기할 수 있도록 설정할 수 없습니다." -#. 0 -> some lines found -#. 1 -> nothing found -#. 2 -> error -#: src/include/smt/dialogs.rb:838 +#. 0 -> some lines found +#. 1 -> nothing found +#. 2 -> error +#: src/include/smt/dialogs.rb:838 msgid "" "File %1 has been found in your document root.\n" "\n" @@ -534,128 +534,127 @@ "문서 루트에서 %1 파일을 발견했습니다.\n" "\n" "'/repo/keys'가 허용된 디렉토리로 등록되어 있는지 확인하거나\n" -"파일을 삭제하십시오. 그러지 않으면 SMT 서버가 제대로 동작하지 않을 수 있습니" -"다." +"파일을 삭제하십시오. 그러지 않으면 SMT 서버가 제대로 동작하지 않을 수 있습니다." -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:854 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:854 msgid "Adjust SMT configuration" msgstr "SMT 구성 조정" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:856 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:856 msgid "Adjust database configuration" msgstr "데이터베이스 구성 조정" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:858 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:858 msgid "Check and install server certificate" msgstr "서버 인증서 확인 및 설치" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:860 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:860 msgid "Adjust Web-server configuration" msgstr "웹 서버 구성 조정" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:862 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:862 msgid "Adjust SMT service" msgstr "SMT 서비스 조정" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:864 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:864 msgid "Write firewall settings" msgstr "방화벽 설정 쓰기" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:866 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:866 msgid "Write cron settings" msgstr "cron 설정 쓰기" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:868 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:868 msgid "Check mirrored repositories" msgstr "미러링된 리포지토리 확인" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:870 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:870 msgid "Run synchronization check" msgstr "동기화 확인 실행" -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:874 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:874 msgid "Adjusting SMT configuration..." msgstr "SMT 구성 조정 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:876 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:876 msgid "Adjusting database configuration..." msgstr "데이터베이스 구성 조정 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:878 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:878 msgid "Checking and installing server certificate..." msgstr "서버 인증서 확인 및 설치 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:880 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:880 msgid "Adjusting Web server configuration..." msgstr "웹 서버 구성 조정 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:882 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:882 msgid "Adjusting SMT service..." msgstr "SMT 서비스 조정 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:884 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:884 msgid "Writing firewall settings..." msgstr "방화벽 설정 쓰는 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:886 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:886 msgid "Writing cron settings..." msgstr "cron 설정 쓰는 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:888 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:888 msgid "Checking mirrored repositories..." msgstr "미러링된 리포지토리 확인 중..." -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:890 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:890 msgid "Running synchronization check..." msgstr "동기화 확인 실행 중..." -#. TRANSLATORS: Dialog caption -#: src/include/smt/dialogs.rb:896 +#. TRANSLATORS: Dialog caption +#: src/include/smt/dialogs.rb:896 msgid "Writing SMT Configuration" msgstr "SMT 구성 쓰는 중" -#. TRANSLATORS: Dialog caption -#: src/include/smt/dialogs.rb:1005 +#. TRANSLATORS: Dialog caption +#: src/include/smt/dialogs.rb:1005 msgid "Writing Changes" msgstr "변경 사항 쓰는 중" -#. TRANSLATORS: Progress stage -#: src/include/smt/dialogs.rb:1010 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:1010 msgid "Write patches" msgstr "패치 쓰기" -#. TRANSLATORS: Bussy message /progress/ -#: src/include/smt/dialogs.rb:1014 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:1014 msgid "Writing patches..." msgstr "패치 쓰는 중..." -#. TRANSLATORS: error report -#: src/include/smt/dialogs.rb:1167 src/modules/SMTData.rb:1130 +#. TRANSLATORS: error report +#: src/include/smt/dialogs.rb:1167 src/modules/SMTData.rb:1130 msgid "The first and the second password do not match." msgstr "" "첫 번째와 두 번째 비밀번호가\n" "일치하지 않습니다." -#. TRANSLATORS: error report, actually containing a question -#: src/include/smt/dialogs.rb:1176 +#. TRANSLATORS: error report, actually containing a question +#: src/include/smt/dialogs.rb:1176 msgid "" "Password should not be empty.\n" "\n" @@ -665,8 +664,8 @@ "\n" "그래도 계속 진행하시겠습니까?" -#. Pop-up error message -#: src/include/smt/dialogs.rb:1199 +#. Pop-up error message +#: src/include/smt/dialogs.rb:1199 msgid "" "The SMT URL must not be empty.\n" "\n" @@ -676,8 +675,8 @@ "\n" "다음 형식으로 SMT 서버 URL을 입력하십시오. http:://server.name/\n" -#. BNC #518222: Check for 'http://.+' or 'https://.+' in URL -#: src/include/smt/dialogs.rb:1211 +#. BNC #518222: Check for 'http://.+' or 'https://.+' in URL +#: src/include/smt/dialogs.rb:1211 msgid "" "Invalid SMT Server URL.\n" "\n" @@ -687,55 +686,55 @@ "\n" "URL은 'http://' 또는 'https://'로 시작해야 합니다." -#. Pop-up error message -#: src/include/smt/dialogs.rb:1224 +#. Pop-up error message +#: src/include/smt/dialogs.rb:1224 msgid "Update server user must not be empty." msgstr "업데이트 서버 사용자는 비워 둘 수 없습니다." -#. Pop-up error message -#: src/include/smt/dialogs.rb:1232 +#. Pop-up error message +#: src/include/smt/dialogs.rb:1232 msgid "Update server password must not be empty." msgstr "업데이트 서버 비밀번호는 비워 둘 수 없습니다." -#. TRANSLATORS: LogView label -#: src/include/smt/dialogs.rb:1246 +#. TRANSLATORS: LogView label +#: src/include/smt/dialogs.rb:1246 msgid "&Test Details" msgstr "테스트 세부 사항(&T)" -#. TRANSLATORS: LogView line -#: src/include/smt/dialogs.rb:1261 +#. TRANSLATORS: LogView line +#: src/include/smt/dialogs.rb:1261 msgid "Test result: success" msgstr "테스트 결과: 성공" -#. TRANSLATORS: LogView line -#: src/include/smt/dialogs.rb:1268 +#. TRANSLATORS: LogView line +#: src/include/smt/dialogs.rb:1268 msgid "Test result: failure" msgstr "테스트 결과: 실패" -#. busy message -#: src/include/smt/dialogs.rb:1410 +#. busy message +#: src/include/smt/dialogs.rb:1410 msgid "Getting list of the currently available repositories..." msgstr "현재 사용 가능한 리포지토리 목록을 가져오는 중..." -#. empty /--/ == no specific target -#: src/include/smt/dialogs.rb:1466 src/include/smt/dialogs.rb:1467 +#. empty /--/ == no specific target +#: src/include/smt/dialogs.rb:1466 src/include/smt/dialogs.rb:1467 msgid "Unknown" msgstr "알 수 없음" -#. Used as a fallback -#. %1 is replaced with a patch category -#: src/include/smt/dialogs.rb:1545 +#. Used as a fallback +#. %1 is replaced with a patch category +#: src/include/smt/dialogs.rb:1545 msgid "Patch category '%1'" msgstr "패치 카테고리 '%1'" -#. No patch listed, no patch selected -#: src/include/smt/dialogs.rb:1563 +#. No patch listed, no patch selected +#: src/include/smt/dialogs.rb:1563 msgid "There are no patches available in this repository." msgstr "이 리포지토리에서 사용할 수 있는 패치가 없습니다." -#. %1 is replaced with a warning that patch is filtered-out by a category filter -#. %2 is replaced with patch description -#: src/include/smt/dialogs.rb:1586 +#. %1 is replaced with a warning that patch is filtered-out by a category filter +#. %2 is replaced with patch description +#: src/include/smt/dialogs.rb:1586 msgid "" "%1\n" "\n" @@ -745,97 +744,93 @@ "\n" "%2" -#. Connected with the text above, informs user about the current patch state -#. %1 is replaced with a translated patch type -#: src/include/smt/dialogs.rb:1590 -msgid "" -"<b>Patch is filtered-out by patch-category filter (%1) and thus cannot be " -"enabled in this dialog.</b>" -msgstr "" -"<b>패치가 패치-카테고리 필터(%1)로 필터링되어 이 대화 상자에서 활성화할 수 없" -"습니다.</b>" +#. Connected with the text above, informs user about the current patch state +#. %1 is replaced with a translated patch type +#: src/include/smt/dialogs.rb:1590 +msgid "<b>Patch is filtered-out by patch-category filter (%1) and thus cannot be enabled in this dialog.</b>" +msgstr "<b>패치가 패치-카테고리 필터(%1)로 필터링되어 이 대화 상자에서 활성화할 수 없습니다.</b>" -#: src/include/smt/dialogs.rb:1616 +#: src/include/smt/dialogs.rb:1616 msgid "There are no repositories with staging enabled" msgstr "스테이징이 활성화된 리포지토리 없음" -#: src/include/smt/dialogs.rb:1632 +#: src/include/smt/dialogs.rb:1632 msgid "Mirror timestamp: %1" msgstr "미러 타임스탬프: %1" -#: src/include/smt/dialogs.rb:1639 +#: src/include/smt/dialogs.rb:1639 msgid "Never mirrored" msgstr "미러링 안 함" -#: src/include/smt/dialogs.rb:1646 +#: src/include/smt/dialogs.rb:1646 msgid "Testing snapshot timestamp: %1" msgstr "테스팅 스냅샷 타임스탬프: %1" -#: src/include/smt/dialogs.rb:1653 src/include/smt/dialogs.rb:1667 +#: src/include/smt/dialogs.rb:1653 src/include/smt/dialogs.rb:1667 msgid "Never created" msgstr "생성 안 함" -#: src/include/smt/dialogs.rb:1660 +#: src/include/smt/dialogs.rb:1660 msgid "Production snapshot timestamp: %1" msgstr "운영 스냅샷 타임스탬프: %1" -#. If filter is used, remove 'nil's -#: src/include/smt/dialogs.rb:1819 +#. If filter is used, remove 'nil's +#: src/include/smt/dialogs.rb:1819 msgid "Repository does not allow patch-filtering" msgstr "리포지토리가 패치 필터링 허용 안 함" -#. %1 Client (is|is not) up-to-date -#. %2 There are some patches pending... -#: src/include/smt/dialogs.rb:1860 +#. %1 Client (is|is not) up-to-date +#. %2 There are some patches pending... +#: src/include/smt/dialogs.rb:1860 msgid "%1<br>%2" msgstr "%1<br>%2" -#: src/include/smt/dialogs.rb:1862 +#: src/include/smt/dialogs.rb:1862 msgid "Client is up-to-date" msgstr "클라이언트가 최신 상태임" -#: src/include/smt/dialogs.rb:1863 +#: src/include/smt/dialogs.rb:1863 msgid "<b>Client is not up-to-date</b>" msgstr "<b>클라이언트가 최신 상태가 아님</b>" -#. %1 is replaced with a comma-separated pieces of info, e.g., 'Security patches: 5' -#: src/include/smt/dialogs.rb:1867 +#. %1 is replaced with a comma-separated pieces of info, e.g., 'Security patches: 5' +#: src/include/smt/dialogs.rb:1867 msgid "There are some patches pending:<br>%1" msgstr "일부 대기 중인 패치가 있음:<br>%1" -#. Number of patches pending -#: src/include/smt/dialogs.rb:1876 +#. Number of patches pending +#: src/include/smt/dialogs.rb:1876 msgid "Status is unknown" msgstr "상태를 알 수 없음" -#: src/include/smt/dialogs.rb:1886 +#: src/include/smt/dialogs.rb:1886 msgid "There are no registered clients or their status is unknown" msgstr "등록된 클라이언트가 없거나 클라이언트 상태를 알 수 없음" -#: src/include/smt/dialogs.rb:1914 +#: src/include/smt/dialogs.rb:1914 msgid "Unknown Status" msgstr "알 수 없는 상태" -#: src/include/smt/dialogs.rb:1917 +#: src/include/smt/dialogs.rb:1917 msgid "Never" msgstr "안 함" -#. Catalog Name (Target) -#: src/include/smt/dialogs.rb:1999 +#. Catalog Name (Target) +#: src/include/smt/dialogs.rb:1999 msgid "%1 (%2)(%3)" msgstr "%1(%2)(%3)" -#: src/include/smt/dialogs.rb:2005 +#: src/include/smt/dialogs.rb:2005 msgid "%1 (%2)" msgstr "%1(%2)" -#. a mlti-selection-box label -#: src/include/smt/dialogs.rb:2057 +#. a mlti-selection-box label +#: src/include/smt/dialogs.rb:2057 msgid "Exclude All Patches of Selected Categories" msgstr "선택한 범주의 패치를 모두 제외" -#. a pop-up message -#: src/include/smt/dialogs.rb:2133 +#. a pop-up message +#: src/include/smt/dialogs.rb:2133 msgid "" "This repository does not allow patch filtering.\n" "You can create snapshots of its current stage though." @@ -843,8 +838,8 @@ "이 리포지토리는 패치 필터링을 허용하지 않습니다.\n" "현재 스테이지의 스냅샷을 만들 수는 있습니다." -#. a pop-up message -#: src/include/smt/dialogs.rb:2154 +#. a pop-up message +#: src/include/smt/dialogs.rb:2154 msgid "" "This patch is filtered-out by a category-based filter\n" "and thus its status cannot be changed in this dialog." @@ -852,13 +847,13 @@ "이 패치는 범주 기반 필터로 필터링되어\n" "이 대화 상자에서 상태를 변경할 수 없습니다." -#. Inverting the status: "filtered" used as new "status" -#: src/include/smt/dialogs.rb:2172 +#. Inverting the status: "filtered" used as new "status" +#: src/include/smt/dialogs.rb:2172 msgid "Unable to change the current patch status." msgstr "현재 패치 상태를 변경할 수 없습니다." -#. Multiline key description -#: src/include/smt/dialogs.rb:2298 +#. Multiline key description +#: src/include/smt/dialogs.rb:2298 msgid "" "Key ID: %1\n" "UID: %2\n" @@ -868,14 +863,14 @@ "UID: %2\n" "지문: %3" -#. pop-up heading -#: src/include/smt/dialogs.rb:2308 +#. pop-up heading +#: src/include/smt/dialogs.rb:2308 msgid "Signing Key Passphrase" msgstr "서명 키 암호 문구" -#. pop-up dialog message -#. %1 is replaced with a (possibly multiline) key descrioption -#: src/include/smt/dialogs.rb:2314 +#. pop-up dialog message +#. %1 is replaced with a (possibly multiline) key descrioption +#: src/include/smt/dialogs.rb:2314 msgid "" "SMT is configured to sign the snapshot with the following key:\n" "\n" @@ -891,152 +886,152 @@ "키 암호 문구를 입력하고 [확인]을 누릅니다.\n" "아니면 [취소]를 눌러 서명 절차를 건너뜁니다." -#: src/include/smt/dialogs.rb:2331 +#: src/include/smt/dialogs.rb:2331 msgid "Key &Passphrase" msgstr "키 암호 문구(&P)" -#: src/include/smt/dialogs.rb:2332 +#: src/include/smt/dialogs.rb:2332 msgid "&Once Again" msgstr "다시(&O)" -#. pop-up error message -#: src/include/smt/dialogs.rb:2359 +#. pop-up error message +#: src/include/smt/dialogs.rb:2359 msgid "Entered passphrases are not identical." msgstr "입력한 암호 문구가 일치하지 않습니다." -#. a bussy message -#: src/include/smt/dialogs.rb:2399 +#. a bussy message +#: src/include/smt/dialogs.rb:2399 msgid "Creating repository snapshot..." msgstr "리포지토리 스냅샷 생성 중..." -#. a pop-up error message -#: src/include/smt/dialogs.rb:2414 +#. a pop-up error message +#: src/include/smt/dialogs.rb:2414 msgid "An error has occurred while creating the snapshot." msgstr "스냅샷을 생성하는 중 오류가 발생했습니다." -#. very simple e-mail validator -#: src/include/smt/dialogs.rb:2493 +#. very simple e-mail validator +#: src/include/smt/dialogs.rb:2493 msgid "New &E-Mail" msgstr "새로운 전자 메일(&E)" -#: src/include/smt/dialogs.rb:2493 +#: src/include/smt/dialogs.rb:2493 msgid "Editing &E-Mail" msgstr "전자 메일 편집 중(&E)" -#. OK pressed -#: src/include/smt/dialogs.rb:2528 +#. OK pressed +#: src/include/smt/dialogs.rb:2528 msgid "E-mail '%1' is not valid." msgstr "전자 메일 '%1'이(가) 잘못되었습니다." -#. pop-up error message -#. pop-up error message -#. pop-up error message -#: src/include/smt/dialogs.rb:2573 src/include/smt/dialogs.rb:2586 -#: src/include/smt/dialogs.rb:2603 src/include/smt/dialogs.rb:2611 +#. pop-up error message +#. pop-up error message +#. pop-up error message +#: src/include/smt/dialogs.rb:2573 src/include/smt/dialogs.rb:2586 +#: src/include/smt/dialogs.rb:2603 src/include/smt/dialogs.rb:2611 msgid "Internal Error: Cannot toggle the current state." msgstr "내부 오류: 현재 상태를 토글할 수 없습니다." -#. Error message -#: src/include/smt/dialogs.rb:2649 +#. Error message +#: src/include/smt/dialogs.rb:2649 msgid "Unable to mirror the selected repository." msgstr "선택한 리포지토리를 미러링할 수 없습니다." -#: src/include/smt/dialogs.rb:2655 +#: src/include/smt/dialogs.rb:2655 msgid "Mirroring Repository" msgstr "리포지토리 미러링 중" -#: src/include/smt/dialogs.rb:2656 +#: src/include/smt/dialogs.rb:2656 msgid "&Progress" msgstr "진행(&P)" -#: src/include/smt/dialogs.rb:2657 +#: src/include/smt/dialogs.rb:2657 msgid "&Stop" msgstr "중지(&S)" -#: src/include/smt/dialogs.rb:2665 +#: src/include/smt/dialogs.rb:2665 msgid "Started mirroring the selected repository with process ID: %1\n" msgstr "선택한 리포지토리를 프로세스 ID로 미러링 시작: %1\n" -#. a headline -#: src/include/smt/dialogs.rb:2691 +#. a headline +#: src/include/smt/dialogs.rb:2691 msgid "Aborting the Mirroring" msgstr "미러링 중단 중" -#. a pop-up question -#: src/include/smt/dialogs.rb:2693 +#. a pop-up question +#: src/include/smt/dialogs.rb:2693 msgid "Are you sure you want to abort the current mirroring process?" msgstr "현재 미러링 프로세스를 중단하시겠습니까?" -#. push button -#: src/include/smt/dialogs.rb:2695 +#. push button +#: src/include/smt/dialogs.rb:2695 msgid "Abort Mirroring" msgstr "미러링 중단" -#. push button -#: src/include/smt/dialogs.rb:2697 +#. push button +#: src/include/smt/dialogs.rb:2697 msgid "Continue Mirroring" msgstr "미러링 계속" -#: src/include/smt/dialogs.rb:2700 +#: src/include/smt/dialogs.rb:2700 msgid "Aborting...\n" msgstr "중단 중...\n" -#. BNC #519216: Purge cache right after mirroring -#: src/include/smt/dialogs.rb:2738 +#. BNC #519216: Purge cache right after mirroring +#: src/include/smt/dialogs.rb:2738 msgid "Finished\n" msgstr "완료됨\n" -#: src/include/smt/dialogs.rb:2744 +#: src/include/smt/dialogs.rb:2744 msgid "Mirroring failed\n" msgstr "미러링 실패\n" -#. BNC #520557: Manual or additional cron commands -#. BNC #520557: Handling unknown script -#: src/include/smt/dialogs.rb:2842 src/include/smt/dialogs.rb:3266 +#. BNC #520557: Manual or additional cron commands +#. BNC #520557: Handling unknown script +#: src/include/smt/dialogs.rb:2842 src/include/smt/dialogs.rb:3266 msgid "Command: %1" msgstr "명령: %1" -#. Offer adding the script only if exists -#: src/include/smt/dialogs.rb:2872 +#. Offer adding the script only if exists +#: src/include/smt/dialogs.rb:2872 msgid "Uploading Support Configs" msgstr "지원 구성 업로드 중" -#. Script-call period, used as a table item -#: src/include/smt/dialogs.rb:2905 src/include/smt/dialogs.rb:3201 +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:2905 src/include/smt/dialogs.rb:3201 msgid "Periodically" msgstr "주기적으로" -#. Script-call period, used as a table item -#: src/include/smt/dialogs.rb:2911 src/include/smt/dialogs.rb:3198 +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:2911 src/include/smt/dialogs.rb:3198 msgid "Monthly" msgstr "매달" -#: src/include/smt/dialogs.rb:2915 src/include/smt/dialogs.rb:2926 -#: src/include/smt/dialogs.rb:2944 src/include/smt/dialogs.rb:2952 -#: src/include/smt/dialogs.rb:2961 src/include/smt/dialogs.rb:2969 +#: src/include/smt/dialogs.rb:2915 src/include/smt/dialogs.rb:2926 +#: src/include/smt/dialogs.rb:2944 src/include/smt/dialogs.rb:2952 +#: src/include/smt/dialogs.rb:2961 src/include/smt/dialogs.rb:2969 msgid "Undefined" msgstr "정의되지 않음" -#. Script-call period, used as a table item -#: src/include/smt/dialogs.rb:2920 src/include/smt/dialogs.rb:3197 +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:2920 src/include/smt/dialogs.rb:3197 msgid "Weekly" msgstr "매주" -#. Script-call period, used as a table item -#: src/include/smt/dialogs.rb:2933 src/include/smt/dialogs.rb:3196 +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:2933 src/include/smt/dialogs.rb:3196 msgid "Daily" msgstr "매일" -#: src/include/smt/dialogs.rb:2943 +#: src/include/smt/dialogs.rb:2943 msgid "Every %1 hours" msgstr "%1시간마다" -#: src/include/smt/dialogs.rb:2960 +#: src/include/smt/dialogs.rb:2960 msgid "Every %1 minutes" msgstr "%1분마다" -#. TRANSLATORS: informational message (Report::Message) -#: src/include/smt/dialogs.rb:3011 +#. TRANSLATORS: informational message (Report::Message) +#: src/include/smt/dialogs.rb:3011 msgid "" "Scheduled jobs have been disabled due to missing packages.\n" "To install the missing packages and set up the scheduled jobs,\n" @@ -1046,53 +1041,53 @@ "누락된 패키지를 설치하고 예약 작업을 설정하려면\n" "YaST SMT 구성 모듈을 다시 시작해야 합니다." -#: src/include/smt/dialogs.rb:3038 +#: src/include/smt/dialogs.rb:3038 msgid "Every H-th &Hour" msgstr "H-th시간마다(&H)" -#: src/include/smt/dialogs.rb:3039 +#: src/include/smt/dialogs.rb:3039 msgid "Every M-th &Minute" msgstr "M-th분마다(&M)" -#: src/include/smt/dialogs.rb:3041 src/include/smt/dialogs.rb:3222 +#: src/include/smt/dialogs.rb:3041 src/include/smt/dialogs.rb:3222 msgid "&Hour" msgstr "시간(&H)" -#: src/include/smt/dialogs.rb:3042 src/include/smt/dialogs.rb:3233 +#: src/include/smt/dialogs.rb:3042 src/include/smt/dialogs.rb:3233 msgid "&Minute" msgstr "분(&M)" -#. Weekly -#: src/include/smt/dialogs.rb:3184 +#. Weekly +#: src/include/smt/dialogs.rb:3184 msgid "Editing a SMT Scheduled Job" msgstr "SMT 예약 작업 편집 중" -#: src/include/smt/dialogs.rb:3185 +#: src/include/smt/dialogs.rb:3185 msgid "Adding New SMT Scheduled Job" msgstr "새로운 SMT 예약 작업 추가 중" -#: src/include/smt/dialogs.rb:3194 +#: src/include/smt/dialogs.rb:3194 msgid "&Frequency" msgstr "빈도(&F)" -#: src/include/smt/dialogs.rb:3208 +#: src/include/smt/dialogs.rb:3208 msgid "&Job to Run" msgstr "실행할 작업(&J)" -#: src/include/smt/dialogs.rb:3212 +#: src/include/smt/dialogs.rb:3212 msgid "Job Start Time" msgstr "작업 시작 시간" -#: src/include/smt/dialogs.rb:3219 +#: src/include/smt/dialogs.rb:3219 msgid "Day of the &Week" msgstr "요일(&W)" -#: src/include/smt/dialogs.rb:3228 +#: src/include/smt/dialogs.rb:3228 msgid "&Day of the Month" msgstr "날짜(&D)" -#. TRANSLATORS: yes-no popup -#: src/include/smt/dialogs.rb:3359 +#. TRANSLATORS: yes-no popup +#: src/include/smt/dialogs.rb:3359 msgid "" "Really exit?\n" "All changes will be lost." @@ -1100,8 +1095,8 @@ "정말로 중단하시겠습니까?\n" "모든 변경사항이 사라집니다." -#. TRANSLATORS: help a1 -#: src/include/smt/helps.rb:17 +#. TRANSLATORS: help a1 +#: src/include/smt/helps.rb:17 msgid "" "<p><big><b>Customer Center Access</b></big><br>\n" "Enter the credentials for SUSE Updates (updates.suse.com) here.</p>\n" @@ -1109,14 +1104,12 @@ "<p><big><b>고객 센터 액세스</b></big><br>\n" "SUSE 업데이트(updates.suse.com)에 대한 자격 증명을 여기에 입력하십시오.</p>\n" -#. TRANSLATORS: help a2 -#: src/include/smt/helps.rb:21 +#. TRANSLATORS: help a2 +#: src/include/smt/helps.rb:21 msgid "" -"<p><b>User</b> and <b>Password</b> are needed for Customer Center " -"authentication.\n" +"<p><b>User</b> and <b>Password</b> are needed for Customer Center authentication.\n" "To test the credentials you entered, click <b>Test</b>.\n" -"SMT then connects to the Customer Center server for authentication and " -"download of\n" +"SMT then connects to the Customer Center server for authentication and download of\n" "test data.</p>\n" msgstr "" "<p><b>사용자</b> 및 <b>비밀번호</b>는 고객 센터 인증을 위해 필요합니다.\n" @@ -1124,18 +1117,16 @@ "그러면 SMT가 인증을 위해 고객 센터 서버에 연결하고 테스트 데이터를 \n" "다운로드합니다.</p>\n" -#. TRANSLATORS: help a3 -#: src/include/smt/helps.rb:28 -msgid "" -"<p>E-mail should be the one you used to register to the customer center.</p>" +#. TRANSLATORS: help a3 +#: src/include/smt/helps.rb:28 +msgid "<p>E-mail should be the one you used to register to the customer center.</p>" msgstr "<p>고객 센터 등록에는 전자 메일을 사용해야 합니다.</p>" -#. TRANSLATORS: help b1 -#: src/include/smt/helps.rb:33 +#. TRANSLATORS: help b1 +#: src/include/smt/helps.rb:33 msgid "" "<p><big><b>Database</b></big><br>\n" -"For security reasons, SMT requires a separate user to connect to the " -"database.\n" +"For security reasons, SMT requires a separate user to connect to the database.\n" "With <b>Database Password</b>, set or change the database\n" "password for that user. The password should not be empty.</p>\n" msgstr "" @@ -1144,18 +1135,17 @@ "<b>데이터베이스 비밀번호</b>를 통해 해당 사용자에 대한 데이터베이스\n" "비밀번호를 설정하거나 변경하십시오. 비밀번호는 비워둘 수 없습니다.</p>\n" -#. TRANSLATORS: help c1 -#: src/include/smt/helps.rb:41 +#. TRANSLATORS: help c1 +#: src/include/smt/helps.rb:41 msgid "" "<p><big><b>Reporting</b></big><br>\n" -"Here you can set up a list of e-mail addresses that SMT will send reports to." -"</p>\n" +"Here you can set up a list of e-mail addresses that SMT will send reports to.</p>\n" msgstr "" "<p><big><b>보고</b></big><br>\n" "여기에서 SMT가 보고서를 보낼 전자 메일 주소 목록을 설정할 수 있습니다.</p>\n" -#. TRANSLATORS: help d1 -#: src/include/smt/helps.rb:46 +#. TRANSLATORS: help d1 +#: src/include/smt/helps.rb:46 msgid "" "<p><big><b>Schedule SMT Jobs</b></big><br>\n" "Here you can edit periodical SMT jobs.</p>" @@ -1163,19 +1153,17 @@ "<p><big><b>SMT 작업 예약</b></big><br>\n" "여기에서 주기적인 SMT 작업을 편집할 수 있습니다.</p>" -#. TRANSLATORS: help d2 -#: src/include/smt/helps.rb:50 +#. TRANSLATORS: help d2 +#: src/include/smt/helps.rb:50 msgid "<p>When adding a new job, first select a <b>Job to Run</b>.</p>" msgstr "<p>새 작업을 추가할 때는 먼저 <b>실행할 작업</b>을 선택하십시오.</p>" -#. TRANSLATORS: help d3 -#: src/include/smt/helps.rb:52 +#. TRANSLATORS: help d3 +#: src/include/smt/helps.rb:52 msgid "" -"<p>When editing a current job or adding new one, the <b>Frequency</b> " -"selection box\n" +"<p>When editing a current job or adding new one, the <b>Frequency</b> selection box\n" "switches dialog mode according to the currently selected value.\n" -"Some fields are enabled or disabled accordingly, e.g., <b>Day of the Week\n" +"Some fields are enabled or disabled accordingly, e.g., <b>Day of the Week</b>\n" "is disabled for <tt>Daily</tt> job frequency.</p>\n" msgstr "" "<p>현재 작업을 편집하거나 새로 추가할 때는 <b>빈도</b> 선택 상자가\n" @@ -1183,8 +1171,8 @@ "일부 필드가 적절히 활성화 또는 비활성화됩니다. 예를 들어 <b>요일</b>\n" "필드는 <tt>매일</tt> 작업 빈도에 대해 비활성화됩니다.</p>\n" -#. TRANSLATORS: help e1 -#: src/include/smt/helps.rb:60 +#. TRANSLATORS: help e1 +#: src/include/smt/helps.rb:60 msgid "" "<p><big><b>Repositories</b></big><br>\n" "Here you can see all repositories available for mirroring.</p>" @@ -1192,8 +1180,8 @@ "<p><big><b>리포지토리</b></big><br>\n" "여기에서 미러링에 사용 가능한 모든 리포지토리를 볼 수 있습니다.</p>" -#. TRANSLATORS: help e2 -#: src/include/smt/helps.rb:64 +#. TRANSLATORS: help e2 +#: src/include/smt/helps.rb:64 msgid "" "<p>To set mirroring on or off, select a repository in the table\n" "and click <b>Toggle Mirroring</b>.</p>" @@ -1201,8 +1189,8 @@ "<p>미러링을 설정하거나 끄려면 테이블에서 리포지토리를 선택하고\n" "<b>미러링 토글</b>을 클릭합니다.</p>" -#. TRANSLATORS: help e3 -#: src/include/smt/helps.rb:68 +#. TRANSLATORS: help e3 +#: src/include/smt/helps.rb:68 msgid "" "<p><b>Staging</b> offers you to create testing and production\n" "snapshots. To enable or disable this feature, select a repository\n" @@ -1212,8 +1200,8 @@ "제공합니다. 이 기능을 활성화 또는 비활성화하려면 테이블에서\n" "리포지토리를 선택하고 <b>스테이징 토글</b>을 클릭합니다.</p>" -#. TRANSLATORS: help f1 -#: src/include/smt/helps.rb:75 +#. TRANSLATORS: help f1 +#: src/include/smt/helps.rb:75 msgid "" "<p><big><b>Staging</b></big><br>\n" "Here you can create testing and production snapshots from the mirrored\n" @@ -1227,8 +1215,8 @@ "패치 필터링을 허용합니다. 그렇지 않은 경우 전체 스냅샷만 생성할 수 있습니다\n" "(필터 사용 불가).</p>" -#. TRANSLATORS: help f2 -#: src/include/smt/helps.rb:83 +#. TRANSLATORS: help f2 +#: src/include/smt/helps.rb:83 msgid "" "<p>Choosing a <b>Repository Name</b> will switch the current\n" "repository. Choosing a <b>Patch Category</b> applies a listing filter\n" @@ -1238,8 +1226,8 @@ "변경됩니다. <b>패치 범주</b>를 선택하면 현재 리포지토리에\n" "목록의 필터가 적용됩니다.</p>" -#. TRANSLATORS: help f3 -#: src/include/smt/helps.rb:89 +#. TRANSLATORS: help f3 +#: src/include/smt/helps.rb:89 msgid "" "<p>To enable or disable <tt>patches</tt> in the snapshot,\n" "select a patch in the table and click <b>Toggle Patch Status</b>.</p>" @@ -1247,39 +1235,35 @@ "<p>스냅샷의 <tt>패치</tt>를 활성화 또는 비활성화하려면\n" "테이블에서 패치를 선택하고 <b>패치 상태 토글</b>을 클릭합니다.</p>" -#. TRANSLATORS: help f4, '->' is actually '->' in HTML -#: src/include/smt/helps.rb:93 +#. TRANSLATORS: help f4, '->' is actually '->' in HTML +#: src/include/smt/helps.rb:93 msgid "" "<p>If you want to change more patches at once, you can also use\n" "<b>Change Status->All Listed Patches...->Enable/Disable</b></p>" msgstr "" "<p>한 번에 더 많은 패치를 변경하려면\n" -"<b>상태 변경->모든 등록된 패치...->활성화/비활성화</b>를 사용할 수 있습" -"니다.</p>" +"<b>상태 변경->모든 등록된 패치...->활성화/비활성화</b>를 사용할 수 있습니다.</p>" -#. TRANSLATORS: help f5, '->' is actually '->' in HTML -#: src/include/smt/helps.rb:97 +#. TRANSLATORS: help f5, '->' is actually '->' in HTML +#: src/include/smt/helps.rb:97 msgid "" "<p>To exclude all patches of a selected type from the <tt>testing</tt>\n" "snapshot, use <b>Change Status->Exclude from Snapshot...</b>.\n" "Such patch cannot be enabled unless you remove the filter again.</p>" msgstr "" "<p>선택한 유형의 패치를 모두 <tt>테스팅</tt>\n" -"스냅샷에서 제외하려면 <b>상태 변경->스냅샷에서 제외...</b>를 사용하십시" -"오.\n" +"스냅샷에서 제외하려면 <b>상태 변경->스냅샷에서 제외...</b>를 사용하십시오.\n" "이러한 패치는 필터를 다시 제거하지 않는 한 활성화할 수 없습니다.</p>" -#: src/include/smt/helps.rb:102 +#: src/include/smt/helps.rb:102 msgid "" "<p>To create <tt>testing</tt> or <tt>production</tt> snapshots\n" -"click <b>Create Snapshot...->From Full Mirror to Testing/From Testing to " -"Production</b>.</p>" +"click <b>Create Snapshot...->From Full Mirror to Testing/From Testing to Production</b>.</p>" msgstr "" "<p><tt>테스팅</tt> 또는 <tt>운영</tt> 스냅샷을 생성하려면\n" -"<b>스냅샷 생성...->전체 미러에서 테스팅으로/테스팅에서 운영으로</b>를 클릭" -"합니다.</p>" +"<b>스냅샷 생성...->전체 미러에서 테스팅으로/테스팅에서 운영으로</b>를 클릭합니다.</p>" -#: src/include/smt/helps.rb:105 +#: src/include/smt/helps.rb:105 msgid "" "<p><b>Testing</b> snapshot is always created from the mirrored repository,\n" "<b>production</b> is always created as a copy of the <b>testing</b> one.</p>" @@ -1287,48 +1271,48 @@ "<p><b>테스팅</b> 스냅샷은 항상 미러링된 리포지토리에서 생성되고\n" "<b>운영</b>은 항상 <b>테스팅</b> 사본으로 생성됩니다.</p>" -#. TRANSLATORS: tab-header -#: src/include/smt/wizard.rb:159 +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:159 msgid "Customer Center Access" msgstr "고객 센터 액세스" -#. TRANSLATORS: tab-header -#: src/include/smt/wizard.rb:167 +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:167 msgid "Database and Reporting" msgstr "데이터베이스 및 보고" -#. TRANSLATORS: tab-header -#: src/include/smt/wizard.rb:180 +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:180 msgid "Repositories" msgstr "리포지토리" -#. TRANSLATORS: tab-header -#: src/include/smt/wizard.rb:192 +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:192 msgid "Clients Status" msgstr "클라이언트 상태" -#. TRANSLATORS: tab-header -#: src/include/smt/wizard.rb:198 +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:198 msgid "Scheduled SMT Jobs" msgstr "예약된 SMT 작업" -#: src/include/smt/wizard.rb:215 src/include/smt/wizard.rb:241 +#: src/include/smt/wizard.rb:215 src/include/smt/wizard.rb:241 msgid "SMT Configuration Wizard - Step %1/%2" msgstr "SMT 구성 마법사 - %1/%2단계" -#. TRANSLATORS: dialog caption -#: src/include/smt/wizard.rb:263 +#. TRANSLATORS: dialog caption +#: src/include/smt/wizard.rb:263 msgid "Update Server Configuration" msgstr "업데이트 서버 구성" -#. TRANSLATORS: dialog caption -#: src/include/smt/wizard.rb:280 +#. TRANSLATORS: dialog caption +#: src/include/smt/wizard.rb:280 msgid "SMT Management" msgstr "SMT 관리" -#. Pop-up error message, %1 is replaced with the SMT user name, -#. %2 with the SMT config file -#: src/modules/SMTData.rb:126 +#. Pop-up error message, %1 is replaced with the SMT user name, +#. %2 with the SMT config file +#: src/modules/SMTData.rb:126 msgid "" "SMT configuration is broken.\n" "LOCAL->smtUser %1 defined in %2 does not exist on the system." @@ -1336,10 +1320,10 @@ "SMT 구성이 잘못되었습니다.\n" "LOCAL->%2에 정의된 smtUser %1이(가) 시스템에 존재하지 않습니다." -#. Something has been changed -#. Apache conf needs writing -#. and Apache service needs restarting -#: src/modules/SMTData.rb:669 +#. Something has been changed +#. Apache conf needs writing +#. and Apache service needs restarting +#: src/modules/SMTData.rb:669 msgid "" "Synchronization script %1 does not exist.\n" "\n" @@ -1349,82 +1333,77 @@ "\n" "SMT 설치를 확인하십시오." -#: src/modules/SMTData.rb:691 +#: src/modules/SMTData.rb:691 msgid "Running the synchronization script failed." msgstr "동기화 스크립트 실행이 실패했습니다." -#: src/modules/SMTData.rb:695 +#: src/modules/SMTData.rb:695 msgid "" "<p><b><big>Details:</big></b></p>\n" -" <p><b>stdout:</b><br><pre>%1</pre>\n" -" <p><b>stderr:</b><br><pre>%2</pre>" +" <p><b>stdout:</b><br><pre>%1</pre></p>\n" +" <p><b>stderr:</b><br><pre>%2</pre></p>" msgstr "" "<p><b><big>세부 사항:</big></b></p>\n" -" <p><b>stdout:</b><br><pre>%1</pre>\n" -" <p><b>stderr:</b><br><pre>%2</pre>" +" <p><b>stdout:</b><br><pre>%1</pre></p>\n" +" <p><b>stderr:</b><br><pre>%2</pre></p>" -#. take care the the post script do not reschedule again -#: src/modules/SMTData.rb:835 +#. take care the the post script do not reschedule again +#: src/modules/SMTData.rb:835 msgid "Cannot write cron settings." msgstr "cron 설정을 쓸 수 없습니다." -#. TRANSLATORS: error message, %1 is replaced with a service-name -#: src/modules/SMTData.rb:851 +#. TRANSLATORS: error message, %1 is replaced with a service-name +#: src/modules/SMTData.rb:851 msgid "Reloading service %1 has failed." msgstr "%1 서비스 다시 로드에 실패했습니다." -#. TRANSLATORS: Pop-up question headline -#: src/modules/SMTData.rb:869 +#. TRANSLATORS: Pop-up question headline +#: src/modules/SMTData.rb:869 msgid "Missing Server Certificate" msgstr "누락된 서버 인증서" -#. TRANSLATORS: Pop-up question, %1 is replaced with a file name -#: src/modules/SMTData.rb:872 +#. TRANSLATORS: Pop-up question, %1 is replaced with a file name +#: src/modules/SMTData.rb:872 msgid "" "Server certificate %1 does not exist.\n" "Would you like to run CA management to create one?\n" "\n" -"The server certificate is vitally important for the update server to support " -"SSL.\n" +"The server certificate is vitally important for the update server to support SSL.\n" msgstr "" "서버 인증서 %1이(가) 존재하지 않습니다.\n" "CA 관리를 실행하여 새로 만드시겠습니까?\n" "\n" "서버 인증서는 SSL을 지원하는 서버 업데이트를 위해 매우 중요합니다.\n" -#: src/modules/SMTData.rb:880 +#: src/modules/SMTData.rb:880 msgid "&Run CA management" msgstr "CA 관리 실행(&R)" -#: src/modules/SMTData.rb:881 src/modules/SMTData.rb:1021 -#: src/modules/SMTData.rb:1052 src/modules/SMTData.rb:1064 +#: src/modules/SMTData.rb:881 src/modules/SMTData.rb:1021 +#: src/modules/SMTData.rb:1052 src/modules/SMTData.rb:1064 msgid "&Skip" msgstr "건너뛰기(&S)" -#. Package is not installed and couldn't be installed -#: src/modules/SMTData.rb:930 +#. Package is not installed and couldn't be installed +#: src/modules/SMTData.rb:930 msgid "Cannot run CA management because package %1 is not installed." msgstr "%1 패키지가 설치되지 않아 CA 관리를 실행할 수 없습니다." -#. Server certificate exists -#: src/modules/SMTData.rb:974 +#. Server certificate exists +#: src/modules/SMTData.rb:974 msgid "Database root Password Required" msgstr "데이터베이스 루트 비밀번호 필요" -#: src/modules/SMTData.rb:982 +#: src/modules/SMTData.rb:982 msgid "Enter the MariaDB root &Password" msgstr "MariaDB 루트 및 비밀번호 입력(&P)" -#. 2 : Cannot read the SMT configuration file -#: src/modules/SMTData.rb:1013 +#. 2 : Cannot read the SMT configuration file +#: src/modules/SMTData.rb:1013 msgid "Unable to read %1" msgstr "%1을(를) 읽을 수 없음" -#: src/modules/SMTData.rb:1014 +#: src/modules/SMTData.rb:1014 msgid "" "SMT was not able to read the configuration file.\n" "Please, check the file and click Retry.\n" @@ -1436,13 +1415,13 @@ "\n" "건너뛰려면 [건너뛰기]를 클릭하십시오.\n" -#: src/modules/SMTData.rb:1020 src/modules/SMTData.rb:1051 -#: src/modules/SMTData.rb:1063 +#: src/modules/SMTData.rb:1020 src/modules/SMTData.rb:1051 +#: src/modules/SMTData.rb:1063 msgid "&Retry" msgstr "재시도(&R)" -#. 4 : Cannot connect to database (wrong mysql root password?) -#: src/modules/SMTData.rb:1028 +#. 4 : Cannot connect to database (wrong mysql root password?) +#: src/modules/SMTData.rb:1028 msgid "" "SMT was not able to connect to the database.\n" "The root password was probably wrong.\n" @@ -1450,12 +1429,12 @@ "SMT가 데이터베이스에 연결할 수 없습니다.\n" "루트 비밀번호가 잘못되었을 수 있습니다.\n" -#. 7 : Cannot create Database smt -#: src/modules/SMTData.rb:1047 +#. 7 : Cannot create Database smt +#: src/modules/SMTData.rb:1047 msgid "Cannot create database" msgstr "데이터베이스를 읽을 수 없음" -#: src/modules/SMTData.rb:1048 +#: src/modules/SMTData.rb:1048 msgid "" "SMT was not able to create the database.\n" "Click Retry to try again.\n" @@ -1463,12 +1442,12 @@ "SMT가 데이터베이스를 생성할 수 없습니다.\n" "[재시도]를 클릭하여 다시 시도하십시오.\n" -#. 21: Database migration failed -#: src/modules/SMTData.rb:1059 +#. 21: Database migration failed +#: src/modules/SMTData.rb:1059 msgid "Database migration failed" msgstr "데이터베이스 마이그레이션에 실패했습니다." -#: src/modules/SMTData.rb:1060 +#: src/modules/SMTData.rb:1060 msgid "" "SMT has failed to migrate the database.\n" "Click Retry to try again.\n" @@ -1476,45 +1455,43 @@ "SMT가 데이터베이스를 마이그레이션하지 못했습니다.\n" "[재시도]를 클릭하여 다시 시도하십시오.\n" -#: src/modules/SMTData.rb:1080 +#: src/modules/SMTData.rb:1080 msgid "Adjusting New Database root Password" msgstr "새로운 데이터베이스 루트 비밀번호 조정 중" -#: src/modules/SMTData.rb:1086 +#: src/modules/SMTData.rb:1086 msgid "" "The current MariaDB root password is empty.\n" "\n" -" For security reasons, please, set " -"a new one." +" For security reasons, please, set a new one." msgstr "" "현재 MariaDB 루트 비밀번호가 비어 있습니다.\n" "\n" -" 보안상의 이유로 새 비밀번호를 설정" -"해야 합니다." +" 보안상의 이유로 새 비밀번호를 설정해야 합니다." -#: src/modules/SMTData.rb:1093 +#: src/modules/SMTData.rb:1093 msgid "New MariaDB root &Password" msgstr "새로운 MariaDB 루트 비밀번호(&P)" -#: src/modules/SMTData.rb:1094 +#: src/modules/SMTData.rb:1094 msgid "New Password &Again" msgstr "새 비밀번호 다시(&A)" -#: src/modules/SMTData.rb:1126 +#: src/modules/SMTData.rb:1126 msgid "Set up a new password, please." msgstr "새로운 비밀번호를 설정하십시오." -#. rw only for owner -#: src/modules/SMTData.rb:1189 +#. rw only for owner +#: src/modules/SMTData.rb:1189 msgid "Setting up new MariaDB root password failed." msgstr "새로운 MariaDB 루트 비밀번호 설정에 실패했습니다." -#. root password has been already set -#: src/modules/SMTData.rb:1251 +#. root password has been already set +#: src/modules/SMTData.rb:1251 msgid "SMT needs to set up the database." msgstr "SMT가 데이터베이스를 설정해야 합니다." -#. rw only for owner -#: src/modules/SMTData.rb:1392 +#. rw only for owner +#: src/modules/SMTData.rb:1392 msgid "Cannot change SMT user password." msgstr "SMT 사용자 비밀번호를 변경할 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/snapper.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/snapper.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/snapper.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,163 +14,163 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: clients/snapper.ycp -#. Package: Configuration of snapper -#. Summary: Main file -#. Authors: Jiri Suchomel -#. -#. Main file for snapper configuration. Uses all other files. -#: src/clients/snapper.rb:49 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006-2012 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: clients/snapper.ycp +#. Package: Configuration of snapper +#. Summary: Main file +#. Authors: Jiri Suchomel +#. +#. Main file for snapper configuration. Uses all other files. +#: src/clients/snapper.rb:49 msgid "Configuration of system snapshots" msgstr "시스템 스냅샷 구성" -#. text entry label -#. text entry label -#: src/include/snapper/dialogs.rb:131 src/include/snapper/dialogs.rb:252 -#: src/include/snapper/dialogs.rb:500 +#. text entry label +#. text entry label +#: src/include/snapper/dialogs.rb:131 src/include/snapper/dialogs.rb:252 +#: src/include/snapper/dialogs.rb:500 msgid "Description" msgstr "설명" -#. text entry label -#. text entry label -#: src/include/snapper/dialogs.rb:138 src/include/snapper/dialogs.rb:298 +#. text entry label +#. text entry label +#: src/include/snapper/dialogs.rb:138 src/include/snapper/dialogs.rb:298 msgid "User data" msgstr "사용자 데이터" -#. combo box label -#. text entry label -#: src/include/snapper/dialogs.rb:146 src/include/snapper/dialogs.rb:303 +#. combo box label +#. text entry label +#: src/include/snapper/dialogs.rb:146 src/include/snapper/dialogs.rb:303 msgid "Cleanup algorithm" msgstr "정리 알고리즘" -#. popup label, %{num} is number -#: src/include/snapper/dialogs.rb:161 +#. popup label, %{num} is number +#: src/include/snapper/dialogs.rb:161 msgid "Modify Snapshot %{num}" msgstr "스냅샷 %{num} 수정" -#. popup label, %{pre} and %{post} are numbers -#: src/include/snapper/dialogs.rb:167 +#. popup label, %{pre} and %{post} are numbers +#: src/include/snapper/dialogs.rb:167 msgid "Modify Snapshot %{pre} and %{post}" msgstr "스냅샷 %{pre} 및 %{post} 수정" -#. label -#: src/include/snapper/dialogs.rb:169 +#. label +#: src/include/snapper/dialogs.rb:169 msgid "Pre (%{pre})" msgstr "전(%{pre})" -#. label -#: src/include/snapper/dialogs.rb:173 +#. label +#: src/include/snapper/dialogs.rb:173 msgid "Post (%{post})" msgstr "후(%{post})" -#. popup label -#: src/include/snapper/dialogs.rb:250 +#. popup label +#: src/include/snapper/dialogs.rb:250 msgid "Create New Snapshot" msgstr "새 스냅샷 생성" -#. radio button label -#: src/include/snapper/dialogs.rb:263 +#. radio button label +#: src/include/snapper/dialogs.rb:263 msgid "Single snapshot" msgstr "단일 스냅샷" -#. radio button label -#. 0 means there's no post -#: src/include/snapper/dialogs.rb:272 src/include/snapper/dialogs.rb:450 +#. radio button label +#. 0 means there's no post +#: src/include/snapper/dialogs.rb:272 src/include/snapper/dialogs.rb:450 msgid "Pre" msgstr "사전" -#. radio button label, snapshot selection will follow -#: src/include/snapper/dialogs.rb:282 +#. radio button label, snapshot selection will follow +#: src/include/snapper/dialogs.rb:282 msgid "Post, paired with:" msgstr "사후, 페어링 대상:" -#. yes/no popup question -#: src/include/snapper/dialogs.rb:358 +#. yes/no popup question +#: src/include/snapper/dialogs.rb:358 msgid "Really delete snapshot %{num}?" msgstr "스냅샷 %{num}을(를) 정말 삭제합니까?" -#. yes/no popup question -#: src/include/snapper/dialogs.rb:365 +#. yes/no popup question +#: src/include/snapper/dialogs.rb:365 msgid "Really delete snapshots %{pre} and %{post}?" msgstr "스냅샷 %{pre} 및 %{post}을(를) 정말 삭제합니까?" -#. summary dialog caption -#: src/include/snapper/dialogs.rb:380 +#. summary dialog caption +#: src/include/snapper/dialogs.rb:380 msgid "Snapshots" msgstr "스냅샷" -#. generate list of snapshot table items -#: src/include/snapper/dialogs.rb:409 +#. generate list of snapshot table items +#: src/include/snapper/dialogs.rb:409 msgid "Single" msgstr "단일" -#. pre canot be 0 -#: src/include/snapper/dialogs.rb:434 +#. pre canot be 0 +#: src/include/snapper/dialogs.rb:434 msgid "Pre & Post" msgstr "사전 및 사후" -#. busy popup message -#: src/include/snapper/dialogs.rb:469 +#. busy popup message +#: src/include/snapper/dialogs.rb:469 msgid "Reading list of snapshots..." msgstr "스냅샷 목록을 읽는 중..." -#. combo box label -#: src/include/snapper/dialogs.rb:485 +#. combo box label +#: src/include/snapper/dialogs.rb:485 msgid "Current Configuration" msgstr "현재 구성" -#. table header -#: src/include/snapper/dialogs.rb:496 +#. table header +#: src/include/snapper/dialogs.rb:496 msgid "ID" msgstr "ID" -#: src/include/snapper/dialogs.rb:497 +#: src/include/snapper/dialogs.rb:497 msgid "Type" msgstr "유형" -#: src/include/snapper/dialogs.rb:498 +#: src/include/snapper/dialogs.rb:498 msgid "Start Date" msgstr "시작일" -#: src/include/snapper/dialogs.rb:499 +#: src/include/snapper/dialogs.rb:499 msgid "End Date" msgstr "종료일" -#: src/include/snapper/dialogs.rb:501 +#: src/include/snapper/dialogs.rb:501 msgid "User Data" msgstr "사용자 데이터" -#. button label -#: src/include/snapper/dialogs.rb:507 +#. button label +#: src/include/snapper/dialogs.rb:507 msgid "Show Changes" msgstr "변경 사항 표시(&S)" -#. button label -#: src/include/snapper/dialogs.rb:510 +#. button label +#: src/include/snapper/dialogs.rb:510 msgid "Modify" msgstr "수정(&M)" -#. popup message -#: src/include/snapper/dialogs.rb:553 +#. popup message +#: src/include/snapper/dialogs.rb:553 msgid "" "This 'Pre' snapshot is not paired with any 'Post' one yet.\n" "Showing differences is not possible." @@ -178,132 +178,132 @@ "이 '사전' 스냅샷은 아직 '사후' 스냅샷과 페어링되지 않았습니다.\n" "차이를 표시할 수 없습니다." -#. dialog caption -#: src/include/snapper/dialogs.rb:638 +#. dialog caption +#: src/include/snapper/dialogs.rb:638 msgid "Selected Snapshot Overview" msgstr "선택한 스냅샷 개요" -#. '%1: %2' means 'ID: description', adapt the order if necessary -#: src/include/snapper/dialogs.rb:670 +#. '%1: %2' means 'ID: description', adapt the order if necessary +#: src/include/snapper/dialogs.rb:670 msgid "%1: %2" msgstr "%1: %2" -#. busy popup message -#: src/include/snapper/dialogs.rb:689 +#. busy popup message +#: src/include/snapper/dialogs.rb:689 msgid "Calculating changed files..." msgstr "변경된 파일을 계산하는 중..." -#. busy popup message -#: src/include/snapper/dialogs.rb:699 +#. busy popup message +#: src/include/snapper/dialogs.rb:699 msgid "Calculating file modifications..." msgstr "파일 수정을 계산하는 중..." -#. label -#: src/include/snapper/dialogs.rb:707 +#. label +#: src/include/snapper/dialogs.rb:707 msgid "New file was created." msgstr "새 파일이 생성되었습니다." -#. label -#: src/include/snapper/dialogs.rb:711 +#. label +#: src/include/snapper/dialogs.rb:711 msgid "File was removed." msgstr "파일이 제거되었습니다." -#. label -#: src/include/snapper/dialogs.rb:716 +#. label +#: src/include/snapper/dialogs.rb:716 msgid "File content was not changed." msgstr "파일 내용이 변경되지 않았습니다." -#. label -#: src/include/snapper/dialogs.rb:722 +#. label +#: src/include/snapper/dialogs.rb:722 msgid "File does not exist in either snapshot." msgstr "스냅샷에 파일이 없습니다." -#. label -#: src/include/snapper/dialogs.rb:728 +#. label +#: src/include/snapper/dialogs.rb:728 msgid "File content was modified." msgstr "파일 내용이 수정되었습니다." -#. text label, %1, %2 are file modes (like '-rw-r--r--') -#: src/include/snapper/dialogs.rb:738 +#. text label, %1, %2 are file modes (like '-rw-r--r--') +#: src/include/snapper/dialogs.rb:738 msgid "File mode was changed from '%1' to '%2'." msgstr "파일 모드가 '%1'에서 '%2'(으)로 변경되었습니다." -#. text label, %1, %2 are user names -#: src/include/snapper/dialogs.rb:753 +#. text label, %1, %2 are user names +#: src/include/snapper/dialogs.rb:753 msgid "File user ownership was changed from '%1' to '%2'." msgstr "파일 사용자 소유권이 '%1'에서 '%2'(으)로 변경되었습니다." -#. text label, %1, %2 are group names -#: src/include/snapper/dialogs.rb:769 +#. text label, %1, %2 are group names +#: src/include/snapper/dialogs.rb:769 msgid "File group ownership was changed from '%1' to '%2'." msgstr "파일 그룹 소유권이 '%1'에서 '%2'(으)로 변경되었습니다." -#. button label -#: src/include/snapper/dialogs.rb:786 +#. button label +#: src/include/snapper/dialogs.rb:786 msgid "R&estore from First" msgstr "첫 번째 항목부터 복원(&E)" -#. button label -#: src/include/snapper/dialogs.rb:788 +#. button label +#: src/include/snapper/dialogs.rb:788 msgid "Restore" msgstr "복원" -#: src/include/snapper/dialogs.rb:811 +#: src/include/snapper/dialogs.rb:811 msgid "Res&tore from Second" msgstr "두 번째 항목부터 복원(&T)" -#. radio button label -#: src/include/snapper/dialogs.rb:848 +#. radio button label +#: src/include/snapper/dialogs.rb:848 msgid "Show the difference between snapshot and current system" msgstr "스냅샷과 현재 시스템의 차이점을 나타냅니다." -#. radio button label, snapshot selection will follow -#: src/include/snapper/dialogs.rb:860 +#. radio button label, snapshot selection will follow +#: src/include/snapper/dialogs.rb:860 msgid "Show the difference between current and selected snapshot:" msgstr "현재 스냅샷과 선택한 스냅샷의 차이점을 나타냅니다." -#. radio button label -#: src/include/snapper/dialogs.rb:907 +#. radio button label +#: src/include/snapper/dialogs.rb:907 msgid "Show the difference between first and second snapshot" msgstr "첫 번째 스냅샷과 두 번째 스냅샷의 차이점을 나타냅니다." -#. radio button label -#: src/include/snapper/dialogs.rb:918 +#. radio button label +#: src/include/snapper/dialogs.rb:918 msgid "Show the difference between first snapshot and current system" msgstr "첫 번째 스냅샷과 현재 시스템의 차이점을 나타냅니다." -#. radio button label -#: src/include/snapper/dialogs.rb:929 +#. radio button label +#: src/include/snapper/dialogs.rb:929 msgid "Show the difference between second snapshot and current system" msgstr "두 번째 스냅샷과 현재 시스템의 차이점을 나타냅니다." -#. label, date string will follow at the end of line -#: src/include/snapper/dialogs.rb:958 +#. label, date string will follow at the end of line +#: src/include/snapper/dialogs.rb:958 msgid "Time of taking the snapshot:" msgstr "스냅샷 촬영 시간:" -#. label, date string will follow at the end of line -#: src/include/snapper/dialogs.rb:966 +#. label, date string will follow at the end of line +#: src/include/snapper/dialogs.rb:966 msgid "Time of taking the first snapshot:" msgstr "첫 번째 스냅샷 촬영 시간:" -#. label, date string will follow at the end of line -#: src/include/snapper/dialogs.rb:971 +#. label, date string will follow at the end of line +#: src/include/snapper/dialogs.rb:971 msgid "Time of taking the second snapshot:" msgstr "두 번째 스냅샷 촬영 시간:" -#. button label -#: src/include/snapper/dialogs.rb:994 +#. button label +#: src/include/snapper/dialogs.rb:994 msgid "&Open" msgstr "열기(&O)" -#. button label -#: src/include/snapper/dialogs.rb:1040 +#. button label +#: src/include/snapper/dialogs.rb:1040 msgid "Restore Selected" msgstr "선택한 항목 복원" -#. yes/no question, %1 is file name, %2 is number -#: src/include/snapper/dialogs.rb:1125 +#. yes/no question, %1 is file name, %2 is number +#: src/include/snapper/dialogs.rb:1125 msgid "" "Do you want to delete the file\n" "\n" @@ -317,9 +317,9 @@ "\n" " 파일을 현재 시스템에서 삭제하시겠습니까?" -#. yes/no question, %1 is file name, %2 is number -#. yes/no question, %1 is file name, %2 is number -#: src/include/snapper/dialogs.rb:1146 src/include/snapper/dialogs.rb:1165 +#. yes/no question, %1 is file name, %2 is number +#. yes/no question, %1 is file name, %2 is number +#: src/include/snapper/dialogs.rb:1146 src/include/snapper/dialogs.rb:1165 msgid "" "Do you want to copy the file\n" "\n" @@ -333,25 +333,24 @@ "\n" " 파일을 스냅샷 '%2'에서 현재 시스템으로 복사하시겠습니까?" -#. popup message -#: src/include/snapper/dialogs.rb:1191 +#. popup message +#: src/include/snapper/dialogs.rb:1191 msgid "No file was selected for restoring." msgstr "복원할 파일이 선택되지 않았습니다." -#. popup headline -#: src/include/snapper/dialogs.rb:1201 +#. popup headline +#: src/include/snapper/dialogs.rb:1201 msgid "Restoring files" msgstr "파일 복원 중" -#. popup message, %1 is snapshot number, %2 list of files -#: src/include/snapper/dialogs.rb:1204 +#. popup message, %1 is snapshot number, %2 list of files +#: src/include/snapper/dialogs.rb:1204 msgid "" "<p>These files will be restored from snapshot '%1':</p>\n" "<p>\n" "%2\n" "</p>\n" -"<p>Files existing in original snapshot will be copied to current system.\n" +"<p>Files existing in original snapshot will be copied to current system.</p>\n" "<p>Files that did not exist in the snapshot will be deleted.</p>Are you sure?" msgstr "" "<p>이 파일들은 스냅샷 '%1'에서 복원됩니다.</p>\n" @@ -361,8 +360,8 @@ "<p>원본 스냅샷에 존재하는 파일이 현재 시스템에 복사됩니다.</p>\n" "<p>스냅샷에 존재하지 않는 파일은 삭제됩니다.</p>계속하시겠습니까?" -#. Read dialog help -#: src/include/snapper/helps.rb:35 +#. Read dialog help +#: src/include/snapper/helps.rb:35 msgid "" "<p><b><big>Reading the list of snapshots</big></b><br>\n" "</p>\n" @@ -370,147 +369,125 @@ "<p><b><big>스냅샷 목록 읽기</big></b><br>\n" "</p>\n" -#. Summary dialog help: -#: src/include/snapper/helps.rb:39 +#. Summary dialog help: +#: src/include/snapper/helps.rb:39 msgid "" "<p><b><big>Snapshots Configuration</big></b><p>\n" -"<p>The table shows a list of root filesystem snapshots. There are three " -"types\n" -"of snapshots, <b>single</b>, <b>pre</b> and <b>post</b>. Single snapshots " -"are\n" -"used for storing the file system state in a certain time, while Pre and Post " -"are used to define the changes done by special operation performed between " -"taking those two snapshots. Pre and Post snapshots are paired together in " -"the table.</p>\n" -"<p>Select a snapshot or snapshot pair and click <b>Show Changes</b> to see " -"the\n" +"<p>The table shows a list of root filesystem snapshots. There are three types\n" +"of snapshots, <b>single</b>, <b>pre</b> and <b>post</b>. Single snapshots are\n" +"used for storing the file system state in a certain time, while Pre and Post are used to define the changes done by special operation performed between taking those two snapshots. Pre and Post snapshots are paired together in the table.</p>\n" +"<p>Select a snapshot or snapshot pair and click <b>Show Changes</b> to see the\n" "new file system changes in the specified snapshot.</p>\n" msgstr "" "<p><b><big>스냅샷 구성</big></b><p>\n" "<p>테이블은 루트 파일 시스템 스냅샷 목록을 보여줍니다. 스냅샷 종류는\n" "<b>단일</b>, <b>전</b> 및 <b>후</b>의 3가지입니다. 단일 스냅샷은\n" -"특정 시간의 파일 시스템 상태 저장에 사용되고 전 및 후 스냅샷은 두 스냅샷을 찍" -"는 사이에 수행되는 특수 작업에 의한 변경 사항 정의에 사용됩니다. 전 및 후 스" -"냅샷은 테이블에서 쌍으로 묶여 있습니다.</p>\n" +"특정 시간의 파일 시스템 상태 저장에 사용되고 전 및 후 스냅샷은 두 스냅샷을 찍는 사이에 수행되는 특수 작업에 의한 변경 사항 정의에 사용됩니다. 전 및 후 스냅샷은 테이블에서 쌍으로 묶여 있습니다.</p>\n" "<p>스냅샷 또는 스냅샷 쌍을 선택하고 <b>변경 사항 표시</b>를 클릭하여\n" "지정된 스냅샷에서 파일 시스템 변경 사항을 확인하십시오.</p>\n" -#. Show snapshot dialog help -#: src/include/snapper/helps.rb:48 +#. Show snapshot dialog help +#: src/include/snapper/helps.rb:48 msgid "" "<p><b><big>Snapshot Overview</big></b><p>\n" "<p>\n" -"The tree shows all the files that were modified between creating the first " -"('pre') and second ('post') snapshot. On the right side, you see the " -"description generated when the first snapshot was created and the time of " -"creation for both snapshots.\n" +"The tree shows all the files that were modified between creating the first ('pre') and second ('post') snapshot. On the right side, you see the description generated when the first snapshot was created and the time of creation for both snapshots.\n" "</p>\n" "<p>\n" -"When a file is selected in the tree, you see the changes done to it. By " -"default, changes between selected paired snapshots are shown, but it is " -"possible to compare the file with different versions.\n" +"When a file is selected in the tree, you see the changes done to it. By default, changes between selected paired snapshots are shown, but it is possible to compare the file with different versions.\n" "</p>\n" msgstr "" "<p><b><big>스냅샷 개요</big></b><p>\n" "<p>\n" -"트리는 첫 번째('전') 스냅샷과 두 번째('후') 스냅샷을 생성하는 사이에 수정된 " -"모든 파일을 표시합니다. 오른쪽에는 첫 번째 스냅샷 생성이 만들어진 설명과 두 " -"스냅샷에 대한 생성 시간이 나와 있습니다.\n" +"트리는 첫 번째('전') 스냅샷과 두 번째('후') 스냅샷을 생성하는 사이에 수정된 모든 파일을 표시합니다. 오른쪽에는 첫 번째 스냅샷 생성이 만들어진 설명과 두 스냅샷에 대한 생성 시간이 나와 있습니다.\n" "</p>\n" "<p>\n" -"트리에서 파일을 선택하면 그에 대한 변경 사항을 확인할 수 있습니다. 기본적으" -"로 선택한 스냅샷 쌍에 대한 변경 사항이 표시되지만 파일을 다른 버전과 비교하" -"는 것도 가능합니다.\n" +"트리에서 파일을 선택하면 그에 대한 변경 사항을 확인할 수 있습니다. 기본적으로 선택한 스냅샷 쌍에 대한 변경 사항이 표시되지만 파일을 다른 버전과 비교하는 것도 가능합니다.\n" "</p>\n" -#. Show snapshot dialog help, alternative for single snapshots -#: src/include/snapper/helps.rb:58 +#. Show snapshot dialog help, alternative for single snapshots +#: src/include/snapper/helps.rb:58 msgid "" "<p><b><big>Snapshot Overview</big></b><p>\n" "<p>\n" -"The tree shows all the files that differ in a selected snapshot and the " -"current system. On the right side, you see the snapshot description and time " -"of its creation.\n" +"The tree shows all the files that differ in a selected snapshot and the current system. On the right side, you see the snapshot description and time of its creation.\n" "</p>\n" "<p>\n" -"When a file is selected in the tree, you can see the its difference between " -"snapshot version and current system.\n" +"When a file is selected in the tree, you can see the its difference between snapshot version and current system.\n" "</p>\n" msgstr "" "<p><b><big>스냅샷 개요</big></b><p>\n" "<p>\n" -"트리에 선택한 스냅샷과 현재 시스템에서 다른 모든 파일이 표시됩니다. 오른쪽에" -"는 스냅샷 설명과 생성 시간이 표시됩니다.\n" +"트리에 선택한 스냅샷과 현재 시스템에서 다른 모든 파일이 표시됩니다. 오른쪽에는 스냅샷 설명과 생성 시간이 표시됩니다.\n" "</p>\n" "<p>\n" -"트리에서 파일을 선택하면 스냅샷 버전과 현재 시스템 간의 차이점을 확인할 수 있" -"습니다.\n" +"트리에서 파일을 선택하면 스냅샷 버전과 현재 시스템 간의 차이점을 확인할 수 있습니다.\n" "</p>\n" -#. Return Tree of files modified between given snapshots -#. Map is recursively describing the filesystem structure; helps to build Tree widget contents -#: src/modules/Snapper.rb:108 +#. Return Tree of files modified between given snapshots +#. Map is recursively describing the filesystem structure; helps to build Tree widget contents +#: src/modules/Snapper.rb:108 msgid "Failed to get config:\n" msgstr "구성 가져오기 실패:\n" -#. Return the path to given snapshot -#: src/modules/Snapper.rb:129 +#. Return the path to given snapshot +#: src/modules/Snapper.rb:129 msgid "Failed to get snapshot mount point:\n" msgstr "스냅샷 마운트 지점 가져오기 실패:\n" -#. Create new snapshot -#. Return true on success -#: src/modules/Snapper.rb:276 +#. Create new snapshot +#. Return true on success +#: src/modules/Snapper.rb:276 msgid "Failed to create new snapshot:\n" msgstr "새로운 스냅샷 생성 실패:\n" -#. Modify existing snapshot -#. Return true on success -#: src/modules/Snapper.rb:291 +#. Modify existing snapshot +#. Return true on success +#: src/modules/Snapper.rb:291 msgid "Failed to modify snapshot:\n" msgstr "스냅샷 수정 실패:\n" -#. Delete existing snapshot -#. Return true on success -#: src/modules/Snapper.rb:306 +#. Delete existing snapshot +#. Return true on success +#: src/modules/Snapper.rb:306 msgid "Failed to delete snapshot:\n" msgstr "스냅샷 삭제 실패:\n" -#. Snapper read dialog caption -#: src/modules/Snapper.rb:319 +#. Snapper read dialog caption +#: src/modules/Snapper.rb:319 msgid "Initializing Snapper" msgstr "스냅퍼 초기화 중" -#. Progress stage 1/2 -#: src/modules/Snapper.rb:324 +#. Progress stage 1/2 +#: src/modules/Snapper.rb:324 msgid "Read list of configurations" msgstr "구성 목록 읽기" -#. Progress stage 2/2 -#: src/modules/Snapper.rb:326 +#. Progress stage 2/2 +#: src/modules/Snapper.rb:326 msgid "Read list of snapshots" msgstr "스냅샷 목록 읽기" -#. Progress step 1/2 -#: src/modules/Snapper.rb:330 +#. Progress step 1/2 +#: src/modules/Snapper.rb:330 msgid "Reading list of configurations" msgstr "구성 목록 읽는 중" -#. Progress step 2/2 -#: src/modules/Snapper.rb:332 +#. Progress step 2/2 +#: src/modules/Snapper.rb:332 msgid "Reading list of snapshots" msgstr "스냅샷 목록 읽는 중" -#. Progress finished -#: src/modules/Snapper.rb:334 +#. Progress finished +#: src/modules/Snapper.rb:334 msgid "Finished" msgstr "완료됨" -#: src/modules/Snapper.rb:344 +#: src/modules/Snapper.rb:344 msgid "Querying snapper configurations failed:" msgstr "스내퍼 구성 쿼리 실패:" -#: src/modules/Snapper.rb:349 +#: src/modules/Snapper.rb:349 msgid "" "No snapper configurations exist. You have to create one or more\n" "configurations to use yast2-snapper. The snapper command line\n" @@ -520,21 +497,21 @@ "구성을 하나 이상 생성해야 합니다. 스냅퍼 명령줄\n" "도구를 사용하여 구성을 생성할 수 있습니다." -#: src/modules/Snapper.rb:359 +#: src/modules/Snapper.rb:359 msgid "Querying snapper snapshots failed:" msgstr "스내퍼 스냅샷 쿼리 실패:" -#. label for log window -#: src/modules/Snapper.rb:399 +#. label for log window +#: src/modules/Snapper.rb:399 msgid "Restoring Files..." msgstr "파일을 복원하는 중..." -#. log entry (%1 is file name) -#: src/modules/Snapper.rb:428 +#. log entry (%1 is file name) +#: src/modules/Snapper.rb:428 msgid "Deleted %1\n" msgstr "%1 삭제됨\n" -#. log entry (%1 is file name) -#: src/modules/Snapper.rb:481 +#. log entry (%1 is file name) +#: src/modules/Snapper.rb:481 msgid "%1 skipped\n" msgstr "%1 건너뜀\n" Modified: branches/SLE12-SP3/yast/ko/po/sound.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/sound.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/sound.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,146 +14,135 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. popup error message -#: src/clients/sound.rb:49 +#. popup error message +#: src/clients/sound.rb:49 msgid "Sound card database not found. Please check your installation." -msgstr "" -"사운드 카드 데이타베이스를 발견하지 못했습니다. 설치정보를 확인하십시오." +msgstr "사운드 카드 데이타베이스를 발견하지 못했습니다. 설치정보를 확인하십시오." -#. translators: command line help text for Sound module -#: src/clients/sound.rb:59 +#. translators: command line help text for Sound module +#: src/clients/sound.rb:59 msgid "Sound card configuration module." msgstr "사운드 카드 구성 모듈입니다." -#. translators: command line help text for summary action -#: src/clients/sound.rb:69 +#. translators: command line help text for summary action +#: src/clients/sound.rb:69 msgid "Configuration summary of sound cards" msgstr "사운드 카드의 구성 요약 정보입니다." -#. translators: command line help text for add action -#: src/clients/sound.rb:79 +#. translators: command line help text for add action +#: src/clients/sound.rb:79 msgid "Add sound card. Without parameters, add first one detected." -msgstr "" -"사운드 카드를 추가합니다. 매개 변수를 지정하지 않으면 첫 번째로 검색되는 사운" -"드 카드가 추가됩니다." +msgstr "사운드 카드를 추가합니다. 매개 변수를 지정하지 않으면 첫 번째로 검색되는 사운드 카드가 추가됩니다." -#. help text for unknownd parameters -#: src/clients/sound.rb:84 +#. help text for unknownd parameters +#: src/clients/sound.rb:84 msgid "Value of the specific module parameter." msgstr "특정 모듈 매개변수의 값입니다." -#. translators: command line help text for remove action -#: src/clients/sound.rb:91 +#. translators: command line help text for remove action +#: src/clients/sound.rb:91 msgid "Remove sound cards" msgstr "사운드 카드를 제거합니다." -#. translators: command line help text for test action -#: src/clients/sound.rb:98 +#. translators: command line help text for test action +#: src/clients/sound.rb:98 msgid "Play test sound on given sound card" msgstr "지정한 사운드 카드에서 테스트 사운드를 재생합니다." -#. translators: command line help text for test action -#: src/clients/sound.rb:105 +#. translators: command line help text for test action +#: src/clients/sound.rb:105 msgid "Show the information of given sound card" msgstr "지정한 사운드 카드에 대한 정보를 표시합니다." -#. translators: command line help text for set action -#: src/clients/sound.rb:115 +#. translators: command line help text for set action +#: src/clients/sound.rb:115 msgid "Set the new values for given card parameters." msgstr "지정된 카드 매개변수에 대해 새 값을 설정합니다." -#. - for unknown parameter names -#. help text for unknownd parameters; do not translate 'show' -#: src/clients/sound.rb:121 -msgid "" -"Value of the specific module parameter. Use the 'show' command to see a list " -"of allowed parameters." -msgstr "" -"특정 모듈 매개변수의 값입니다. 'show' 명령을 사용하면 허용된 매개변수 목록을 " -"볼 수 있습니다." +#. - for unknown parameter names +#. help text for unknownd parameters; do not translate 'show' +#: src/clients/sound.rb:121 +msgid "Value of the specific module parameter. Use the 'show' command to see a list of allowed parameters." +msgstr "특정 모듈 매개변수의 값입니다. 'show' 명령을 사용하면 허용된 매개변수 목록을 볼 수 있습니다." -#. translators: command line help text for volume action -#: src/clients/sound.rb:131 +#. translators: command line help text for volume action +#: src/clients/sound.rb:131 msgid "Set the volume of specific channels of the given card." msgstr "지정된 카드의 특정 채널에 대한 볼륨을 설정하십시오." -#. - for unknown parameter names -#. help text; do not translate 'channels' as command name -#: src/clients/sound.rb:137 -msgid "" -"Value of the specific channel (0-100). Use the 'channels' command to see a " -"list of available channels." -msgstr "" -"특정 채널의 값입니다(0-100). 'channels' 명령을 사용하면 사용 가능한 채널의 목" -"록을 볼 수 있습니다." +#. - for unknown parameter names +#. help text; do not translate 'channels' as command name +#: src/clients/sound.rb:137 +msgid "Value of the specific channel (0-100). Use the 'channels' command to see a list of available channels." +msgstr "특정 채널의 값입니다(0-100). 'channels' 명령을 사용하면 사용 가능한 채널의 목록을 볼 수 있습니다." -#. translators: command line help text for modules action -#: src/clients/sound.rb:144 +#. translators: command line help text for modules action +#: src/clients/sound.rb:144 msgid "List all available sound kernel modules." msgstr "사용할 수 있는 사운드 커널 모듈을 모두 나열합니다." -#. translators: command line help text for channels action -#: src/clients/sound.rb:151 +#. translators: command line help text for channels action +#: src/clients/sound.rb:151 msgid "List available volume channels of given card." msgstr "특정 카드의 사용 가능한 볼륨 채널을 열거합니다." -#. translators: command line help text for the 'card' option -#: src/clients/sound.rb:159 +#. translators: command line help text for the 'card' option +#: src/clients/sound.rb:159 msgid "Number of sound card" msgstr "사운드 카드 번호입니다." -#. translators: command line help text for the 'all' option -#: src/clients/sound.rb:166 +#. translators: command line help text for the 'all' option +#: src/clients/sound.rb:166 msgid "All available sound cards" msgstr "사용할 수 있는 모든 사운드 카드입니다." -#. translators: command line help text for the 'module' option -#: src/clients/sound.rb:172 +#. translators: command line help text for the 'module' option +#: src/clients/sound.rb:172 msgid "Kernel module (driver) for the sound card" msgstr "사운드 카드의 커널 모듈(드라이버)입니다." -#. translators: command line help text for the 'play' option -#: src/clients/sound.rb:179 +#. translators: command line help text for the 'play' option +#: src/clients/sound.rb:179 msgid "Play the test sound when the card is configured" msgstr "카드를 구성할 때 테스트 사운드를 재생합니다." -#. translators: command line help text for the 'volume' option -#: src/clients/sound.rb:185 +#. translators: command line help text for the 'volume' option +#: src/clients/sound.rb:185 msgid "Volume value for the sound card (0-100)" msgstr "사운드 카드의 볼륨 값(0-100)입니다." -#. result message, %1 is card name -#: src/clients/sound.rb:347 +#. result message, %1 is card name +#: src/clients/sound.rb:347 msgid "Successfully added card '%1'." msgstr "'%1' 카드를 추가했습니다." -#. error message -#. error message -#. error message -#. error message -#: src/clients/sound.rb:374 src/clients/sound.rb:484 src/clients/sound.rb:568 -#: src/clients/sound.rb:611 +#. error message +#. error message +#. error message +#. error message +#: src/clients/sound.rb:374 src/clients/sound.rb:484 src/clients/sound.rb:568 +#: src/clients/sound.rb:611 msgid "You must specify the card number." msgstr "카드 번호를 지정해야 합니다." -#. error message -#. error message -#. error message -#. error message -#. error message -#. error message -#: src/clients/sound.rb:379 src/clients/sound.rb:402 src/clients/sound.rb:425 -#: src/clients/sound.rb:490 src/clients/sound.rb:574 src/clients/sound.rb:617 +#. error message +#. error message +#. error message +#. error message +#. error message +#. error message +#: src/clients/sound.rb:379 src/clients/sound.rb:402 src/clients/sound.rb:425 +#: src/clients/sound.rb:490 src/clients/sound.rb:574 src/clients/sound.rb:617 msgid "There is no such sound card." msgstr "지정한 카드가 없습니다." -#. label: list of card parameters will follow; %1 is card name, %2 driver -#: src/clients/sound.rb:437 +#. label: list of card parameters will follow; %1 is card name, %2 driver +#: src/clients/sound.rb:437 msgid "Parameters of card '%1' (using module %2):\n" msgstr "'%1' 카드의 매개 변수(%2 모듈 사용):\n" -#. label (default value of sound module parameter) -#: src/clients/sound.rb:454 +#. label (default value of sound module parameter) +#: src/clients/sound.rb:454 msgid "" "\n" "\tDefault Value: %1" @@ -161,8 +150,8 @@ "\n" "\t기본값: %1" -#. label (current value of sound module parameter) -#: src/clients/sound.rb:464 +#. label (current value of sound module parameter) +#: src/clients/sound.rb:464 msgid "" "\n" "\tCurrent Value: %1" @@ -170,86 +159,86 @@ "\n" "\t현재 값: %1" -#. Do not show any progress during Read() -#: src/clients/sound_proposal.rb:39 +#. Do not show any progress during Read() +#: src/clients/sound_proposal.rb:39 msgid "Detecting sound cards..." msgstr "사운드 카드 검색..." -#. section name in proposal dialog -#: src/clients/sound_proposal.rb:72 +#. section name in proposal dialog +#: src/clients/sound_proposal.rb:72 msgid "Sound" msgstr "사운드" -#. section name in proposal - menu item -#: src/clients/sound_proposal.rb:74 +#. section name in proposal - menu item +#: src/clients/sound_proposal.rb:74 msgid "&Sound" msgstr "사운드(&S)" -#. progress bar item -#: src/clients/sound_write.rb:102 +#. progress bar item +#: src/clients/sound_write.rb:102 msgid "Save module configuration" msgstr "모듈 설정 저장" -#. progress bar item -#: src/clients/sound_write.rb:104 +#. progress bar item +#: src/clients/sound_write.rb:104 msgid "Save sound card information" msgstr "사운드 카드 정보 저장" -#. progress bar item -#: src/clients/sound_write.rb:106 +#. progress bar item +#: src/clients/sound_write.rb:106 msgid "Save sysconfig values" msgstr "시스템 설정값 저장" -#. progress bar item -#: src/clients/sound_write.rb:108 +#. progress bar item +#: src/clients/sound_write.rb:108 msgid "Start sound card" msgstr "사운드 카드 시작" -#. progress bar item -#: src/clients/sound_write.rb:110 +#. progress bar item +#: src/clients/sound_write.rb:110 msgid "Store volume" msgstr "음량 저장" -#. progress bar item -#. progres bar label -#. progres bar label -#: src/clients/sound_write.rb:115 src/clients/sound_write.rb:139 -#: src/clients/sound_write.rb:145 +#. progress bar item +#. progres bar label +#. progres bar label +#: src/clients/sound_write.rb:115 src/clients/sound_write.rb:139 +#: src/clients/sound_write.rb:145 msgid "Saving sound card settings..." msgstr "사운드 카드 설정 저장 중..." -#. progress bar item -#: src/clients/sound_write.rb:117 +#. progress bar item +#: src/clients/sound_write.rb:117 msgid "Saving card information..." msgstr "카드 정보 저장중..." -#. progress bar item -#: src/clients/sound_write.rb:119 +#. progress bar item +#: src/clients/sound_write.rb:119 msgid "Saving sysconfig values..." msgstr "시스템 설정값 저장중..." -#. progress bar item -#: src/clients/sound_write.rb:121 +#. progress bar item +#: src/clients/sound_write.rb:121 msgid "Starting sound card..." msgstr "사운드 카드 시작..." -#. progress bar item -#: src/clients/sound_write.rb:123 +#. progress bar item +#: src/clients/sound_write.rb:123 msgid "Storing volume settings..." msgstr "볼륨 설정 저장 중..." -#. progress bar item -#: src/clients/sound_write.rb:128 +#. progress bar item +#: src/clients/sound_write.rb:128 msgid "Install required packages" msgstr "필수 패키지 설치" -#. progress bar item -#: src/clients/sound_write.rb:131 +#. progress bar item +#: src/clients/sound_write.rb:131 msgid "Installing required packages..." msgstr "필수 패키지 설치 중..." -#. log mixer settings -#: src/clients/sound_write.rb:293 +#. log mixer settings +#: src/clients/sound_write.rb:293 msgid "" "These required packages are not available: %1\n" "Some sound devices may not work or some features may not be supported.\n" @@ -261,24 +250,24 @@ "\n" "패키지를 포함하는 추가 소프트웨어 리포지토리를 활성화하거나 추가하십시오.\n" -#. creates summary table with card labels and thier states -#. (running/not running/dissappeared) -#. @return [Array] table contents -#: src/include/sound/complex.rb:61 +#. creates summary table with card labels and thier states +#. (running/not running/dissappeared) +#. @return [Array] table contents +#: src/include/sound/complex.rb:61 msgid "Configured as sound card number %1" msgstr "사운드 카드 번호 %1(으)로 구성됨" -#. sort the cards by index -#: src/include/sound/complex.rb:70 src/include/sound/complex.rb:112 +#. sort the cards by index +#: src/include/sound/complex.rb:70 src/include/sound/complex.rb:112 msgid "Driver %1" msgstr "드라이버 %1" -#: src/include/sound/complex.rb:120 +#: src/include/sound/complex.rb:120 msgid "Not configured" msgstr "구성되지 않음" -#. popup question text -#: src/include/sound/complex.rb:259 +#. popup question text +#: src/include/sound/complex.rb:259 msgid "" "To apply changes, the sound system\n" "must be restarted.\n" @@ -288,7 +277,7 @@ "재시작되어야 합니다.\n" "지금 사운드 시스템을 재시작 하시겠습니까?\n" -#: src/include/sound/complex.rb:272 +#: src/include/sound/complex.rb:272 msgid "" "Restart of the sound system has failed.\n" "Check options of the driver.\n" @@ -296,288 +285,285 @@ "사운드 시스템을 다시 시작하지 못했습니다.\n" "드라이버 옵션을 확인하십시오.\n" -#. error popup message -#: src/include/sound/complex.rb:342 +#. error popup message +#: src/include/sound/complex.rb:342 msgid "PulseAudio is not installed or cannot be configured." msgstr "PulseAudio가 설치되지 않거나 구성할 수 없습니다." -#. frame label -#: src/include/sound/complex.rb:352 +#. frame label +#: src/include/sound/complex.rb:352 msgid "PulseAudio Configuration" msgstr "PulseAudio 구성" -#. check box label -#: src/include/sound/complex.rb:359 +#. check box label +#: src/include/sound/complex.rb:359 msgid "&Enable PulseAudio Support" msgstr "PulseAudio 지원 활성화(&E)" -#. frame label -#: src/include/sound/complex.rb:400 +#. frame label +#: src/include/sound/complex.rb:400 msgid "Advanced Options" msgstr "고급 옵션" -#. check box label -#: src/include/sound/complex.rb:407 +#. check box label +#: src/include/sound/complex.rb:407 msgid "&Start Sequencer (Load MIDI Drivers)" msgstr "시퀀서 시작(MIDI 드라이버 로드)(&S)" -#. menu item -#: src/include/sound/complex.rb:492 +#. menu item +#: src/include/sound/complex.rb:492 msgid "&Volume..." msgstr "음량(&V)..." -#. menu item -#: src/include/sound/complex.rb:494 +#. menu item +#: src/include/sound/complex.rb:494 msgid "Play &Test Sound" msgstr "테스트 사운드 재생(&T)" -#. menu item -#: src/include/sound/complex.rb:496 +#. menu item +#: src/include/sound/complex.rb:496 msgid "&Start Sequencer" msgstr "시퀀서 시작(&S)" -#. menu item -#: src/include/sound/complex.rb:498 +#. menu item +#: src/include/sound/complex.rb:498 msgid "Set as the &Primary Card" msgstr "기본 카드로 설정(&P)" -#. menu item -#: src/include/sound/complex.rb:500 +#. menu item +#: src/include/sound/complex.rb:500 msgid "PulseAudio &Configuration..." msgstr "PulseAudio 구성(&C)..." -#. menu item, do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) -#: src/include/sound/complex.rb:507 +#. menu item, do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) +#: src/include/sound/complex.rb:507 msgid "&Install SoundFonts..." msgstr "사운드폰트 설치(&I)..." -#. dialog title -#: src/include/sound/complex.rb:513 +#. dialog title +#: src/include/sound/complex.rb:513 msgid "Sound Configuration" msgstr "사운드 구성" -#. table header -#: src/include/sound/complex.rb:516 +#. table header +#: src/include/sound/complex.rb:516 msgid "Index" msgstr "인덱스" -#: src/include/sound/complex.rb:516 +#: src/include/sound/complex.rb:516 msgid "Card Model" msgstr "카드 모델" -#. table entry (vendor was not defined) -#: src/include/sound/manual.rb:92 +#. table entry (vendor was not defined) +#: src/include/sound/manual.rb:92 msgid "Other" msgstr "기타" -#. table entry (all vendors) -#. item for all sound card models in sound card driver list -#: src/include/sound/manual.rb:97 src/include/sound/routines.rb:356 +#. table entry (all vendors) +#. item for all sound card models in sound card driver list +#: src/include/sound/manual.rb:97 src/include/sound/routines.rb:356 msgid "All" msgstr "전체" -#. selection box title -#: src/include/sound/manual.rb:184 +#. selection box title +#: src/include/sound/manual.rb:184 msgid "Sound Card &Vendor" msgstr "사운드 카드 제조업체(&V)" -#. selection box title -#: src/include/sound/manual.rb:186 +#. selection box title +#: src/include/sound/manual.rb:186 msgid "Sound card &driver" msgstr "사운드 카드 드라이버(&D)" -#. selection box title -#: src/include/sound/manual.rb:196 +#. selection box title +#: src/include/sound/manual.rb:196 msgid "Sound card &model" msgstr "사운드 카드 모델(&M)" -#. checkbox label -#: src/include/sound/manual.rb:207 +#. checkbox label +#: src/include/sound/manual.rb:207 msgid "Show List of Kernel Modules" msgstr "커널 모듈 목록 표시" -#. input field - label -#: src/include/sound/manual.rb:213 +#. input field - label +#: src/include/sound/manual.rb:213 msgid "&Search" msgstr "검색(&S)" -#. dialog title -#: src/include/sound/manual.rb:219 +#. dialog title +#: src/include/sound/manual.rb:219 msgid "Manual Sound Card Selection" msgstr "사운드 카드 수동 선택" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:33 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:33 msgid "Master" msgstr "주" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:37 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:37 msgid "PCM" msgstr "PCM" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:41 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:41 msgid "Master Mono" msgstr "주 모노" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:45 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:45 msgid "Headphone" msgstr "헤드폰" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:49 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:49 msgid "Line" msgstr "선" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:53 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:53 msgid "CD" msgstr "CD" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:57 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:57 msgid "Mic" msgstr "마이크" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:61 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:61 msgid "Video" msgstr "비디오" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:65 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:65 msgid "Phone" msgstr "전화" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:69 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:69 msgid "Aux" msgstr "보조 장치" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:73 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:73 msgid "PC Speaker" msgstr "PC 스피커" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:77 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:77 msgid "Bass" msgstr "저음" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:81 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:81 msgid "Treble" msgstr "고음" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:85 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:85 msgid "Surround" msgstr "서라운드" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:89 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:89 msgid "LFE" msgstr "LFE" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:93 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:93 msgid "Center" msgstr "센터" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:97 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:97 msgid "Wave" msgstr "웨이브" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:101 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:101 msgid "Wave Center" msgstr "웨이브 센터" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:105 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:105 msgid "Wave Surround" msgstr "웨이브 서라운드" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:109 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:109 msgid "AC97" msgstr "AC97" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:113 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:113 msgid "Music" msgstr "음악" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:117 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:117 msgid "Front" msgstr "앞" -#. channel name - label for IntField widget in mixer dialog -#: src/include/sound/mixer.rb:121 +#. channel name - label for IntField widget in mixer dialog +#: src/include/sound/mixer.rb:121 msgid "iSpeaker" msgstr "iSpeaker" -#. frame label -#: src/include/sound/mixer.rb:219 +#. frame label +#: src/include/sound/mixer.rb:219 msgid "&Master volume" msgstr "주 음량(&M)" -#. push button label -#. Test - button label -#: src/include/sound/mixer.rb:226 src/include/sound/volume.rb:90 +#. push button label +#. Test - button label +#: src/include/sound/mixer.rb:226 src/include/sound/volume.rb:90 msgid "&Test" msgstr "테스트(&T)" -#. frame label -#: src/include/sound/mixer.rb:261 +#. frame label +#: src/include/sound/mixer.rb:261 msgid "&Other channels" msgstr "기타 채널(&O)" -#. card name -#. add vendor/device ID -#: src/include/sound/mixer.rb:279 src/include/sound/read_routines.rb:435 +#. card name +#. add vendor/device ID +#: src/include/sound/mixer.rb:279 src/include/sound/read_routines.rb:435 msgid "Unknown" msgstr "알수 없음`" -#. help text - mixer setting -#: src/include/sound/mixer.rb:377 +#. help text - mixer setting +#: src/include/sound/mixer.rb:377 msgid "" -"<P>With this dialog you can set volume for each channel of the selected " -"sound card. \n" -"Press <B>Next</B> to save your volume settings, press <B>Back</B> to restore " -"the original settings.</P>" +"<P>With this dialog you can set volume for each channel of the selected sound card. \n" +"Press <B>Next</B> to save your volume settings, press <B>Back</B> to restore the original settings.</P>" msgstr "" "<P>이 대화상자에서 선택된 사운드 카드의 각 채널 음량을 설정할 수 있습니다. \n" -"음량 설정을 저장하려면 <B>다음</B>을 누르시고, 원래 설정으로 복귀하시려면 <B>" -"뒤로</B>를 누르십시오.</P>" +"음량 설정을 저장하려면 <B>다음</B>을 누르시고, 원래 설정으로 복귀하시려면 <B>뒤로</B>를 누르십시오.</P>" -#. dialog header, %1 = card id (number), %2 = name -#: src/include/sound/mixer.rb:385 +#. dialog header, %1 = card id (number), %2 = name +#: src/include/sound/mixer.rb:385 msgid "Volume Settings for Card %1 - %2" msgstr "%1 - %2 카드의 볼륨 설정" -#. To translators: popup message, wrong value -#. To translators: popup message, wrong value -#: src/include/sound/options.rb:53 src/include/sound/options.rb:62 +#. To translators: popup message, wrong value +#. To translators: popup message, wrong value +#: src/include/sound/options.rb:53 src/include/sound/options.rb:62 msgid "The value: %1 must be a number" msgstr "설정값 : %1은 숫자여야 함" -#. To translators: "space" means blank character -#: src/include/sound/options.rb:77 +#. To translators: "space" means blank character +#: src/include/sound/options.rb:77 msgid "(space)" msgstr "(공간)" -#. To translators: popup message, wrong value -#: src/include/sound/options.rb:80 +#. To translators: popup message, wrong value +#: src/include/sound/options.rb:80 msgid "String cannot contain: %1" msgstr "문자열은 %1을 포함할수 없음" -#. popup message: wrong value; %1 is list of right values -#: src/include/sound/options.rb:93 +#. popup message: wrong value; %1 is list of right values +#: src/include/sound/options.rb:93 msgid "" "The value must be one of\n" "%1" @@ -585,8 +571,8 @@ "값은 다음 중 하나여야 합니다.\n" "%1" -#. label text -#: src/include/sound/options.rb:254 +#. label text +#: src/include/sound/options.rb:254 msgid "" "Possible value:\n" "not known" @@ -594,25 +580,25 @@ "가능한 값:\n" "알수 없음" -#. when the selected option in table is changed, we need to update -#. combo with values -#. @param [String] values list of values -#. @param [String] default_item default item -#. @return [void] -#: src/include/sound/options.rb:298 +#. when the selected option in table is changed, we need to update +#. combo with values +#. @param [String] values list of values +#. @param [String] default_item default item +#. @return [void] +#: src/include/sound/options.rb:298 msgid "Name of the &Option" msgstr "옵션 이름(&O)" -#: src/include/sound/options.rb:306 src/include/sound/options.rb:312 +#: src/include/sound/options.rb:306 src/include/sound/options.rb:312 msgid "&Value" msgstr "값(&V)" -#: src/include/sound/options.rb:306 src/include/sound/options.rb:312 +#: src/include/sound/options.rb:306 src/include/sound/options.rb:312 msgid "&Option: " msgstr "옵션:(&O)" -#. all non-ASCII characters from value -#: src/include/sound/options.rb:346 +#. all non-ASCII characters from value +#: src/include/sound/options.rb:346 msgid "" "Value of the option contains invalid\n" "characters '%1'.\n" @@ -624,8 +610,8 @@ "\n" "올바른 값을 입력하십시오." -#. all non-ASCII characters from name -#: src/include/sound/options.rb:367 +#. all non-ASCII characters from name +#: src/include/sound/options.rb:367 msgid "" "Name of the option contains invalid\n" "characters '%1'.\n" @@ -637,81 +623,81 @@ "\n" "올바른 이름을 입력하십시오." -#: src/include/sound/options.rb:394 +#: src/include/sound/options.rb:394 msgid "Change the Option" msgstr "옵션 변경" -#: src/include/sound/options.rb:398 +#: src/include/sound/options.rb:398 msgid "Add a New Option" msgstr "새 옵션 추가" -#. Returns description of card module option -#. @param [Object] arg type of arg can be string or list -#. @return [String] description -#: src/include/sound/options.rb:414 +#. Returns description of card module option +#. @param [Object] arg type of arg can be string or list +#. @return [String] description +#: src/include/sound/options.rb:414 msgid "No description available" msgstr "가능한 설명 없음" -#. Table header -- option description -#: src/include/sound/options.rb:439 +#. Table header -- option description +#: src/include/sound/options.rb:439 msgid "Description" msgstr "설명" -#. Table header -- option name -#: src/include/sound/options.rb:441 +#. Table header -- option name +#: src/include/sound/options.rb:441 msgid "Option" msgstr "옵션" -#. Table header -- value of an option -#: src/include/sound/options.rb:443 +#. Table header -- value of an option +#: src/include/sound/options.rb:443 msgid "Value" msgstr "값" -#. restore original option values -#: src/include/sound/options.rb:454 +#. restore original option values +#: src/include/sound/options.rb:454 msgid "R&eset all" msgstr "전체 재설정(&R)" -#. dialog title -#: src/include/sound/options.rb:543 +#. dialog title +#: src/include/sound/options.rb:543 msgid "Sound Card Advanced Options" msgstr "사운드 카드 고급 옵션" -#: src/include/sound/options.rb:554 +#: src/include/sound/options.rb:554 msgid "There are no options for this module" msgstr "이 모듈은 옵션이 없습니다" -#. popup question -#: src/include/sound/options.rb:685 +#. popup question +#: src/include/sound/options.rb:685 msgid "Do you really want to reset all values?" msgstr "모든 값을 재설정하시겠습니까?" -#. Confirmation: label text (detecting hardware: xxx) -#: src/include/sound/read_routines.rb:176 +#. Confirmation: label text (detecting hardware: xxx) +#: src/include/sound/read_routines.rb:176 msgid "Sound Cards" msgstr "사운드 카드" -#. list of all sound modules (table items) -#: src/include/sound/routines.rb:53 +#. list of all sound modules (table items) +#: src/include/sound/routines.rb:53 msgid "Unknown CD-ROM device" msgstr "알 수 없는 CD-ROM 장치" -#: src/include/sound/routines.rb:71 +#: src/include/sound/routines.rb:71 msgid "Unknown CD-ROM Device" msgstr "알 수 없는 CD-ROM 장치" -#: src/include/sound/routines.rb:100 +#: src/include/sound/routines.rb:100 msgid "CD-ROM &Device" msgstr "CD-ROM 장치(&D)" -#. returns list of all available sound modules (OSS only) -#. @return [Array] as above -#: src/include/sound/routines.rb:344 +#. returns list of all available sound modules (OSS only) +#. @return [Array] as above +#: src/include/sound/routines.rb:344 msgid "%1 (%2)" msgstr "%1(%2)" -#. label to error popup, %1 is module name -#: src/include/sound/routines.rb:844 +#. label to error popup, %1 is module name +#: src/include/sound/routines.rb:844 msgid "" "The kernel module %1 for sound support\n" "could not be loaded. This can be caused by incorrect\n" @@ -721,8 +707,8 @@ "수 없습니다. 이는 올바르지 않은 커널 파라미터, 잘못된\n" "IO 또는 IRQ 파라미터 포함으로 야기될 수 있습니다." -#. popup question: different module has to be choosed -#: src/include/sound/routines.rb:1115 +#. popup question: different module has to be choosed +#: src/include/sound/routines.rb:1115 msgid "" "It seems that you have a Thinkpad 600E laptop.\n" "On this laptop, the CS4236 driver should be used\n" @@ -740,9 +726,9 @@ " 경고: 이 검색을 진행하는 데에는 다소 시간이 걸릴 수 있으며\n" " 시스템이 불안정해질 수 있습니다.\n" -#. help text - setup type selection 1/3 -#. help text - quick configuration 1/3 -#: src/include/sound/texts.rb:30 src/include/sound/texts.rb:53 +#. help text - setup type selection 1/3 +#. help text - quick configuration 1/3 +#: src/include/sound/texts.rb:30 src/include/sound/texts.rb:53 msgid "" "<p>\n" "To configure this sound card and adjust its \n" @@ -754,8 +740,8 @@ "<B>일반 설정</B>을 체크하십시오.\n" "</p>\n" -#. help text - setup type selection 2/3 -#: src/include/sound/texts.rb:37 +#. help text - setup type selection 2/3 +#: src/include/sound/texts.rb:37 msgid "" "<p>To set a special option, \n" "check <b>Advanced setup</b>.\n" @@ -767,8 +753,8 @@ "대부분의 사용자는 필요하지 않을 것입니다.\n" "</p>\n" -#. help text - setup type selection 3/3 -#: src/include/sound/texts.rb:44 +#. help text - setup type selection 3/3 +#: src/include/sound/texts.rb:44 msgid "" "<p>\n" "If you do not want to adjust volume or set options now, \n" @@ -781,8 +767,8 @@ "을 체크하십시오. 나중에 음량과 옵션을 설정할 수 있습니다.\n" "</p>\n" -#. help text - quick configuration 2/3 -#: src/include/sound/texts.rb:60 +#. help text - quick configuration 2/3 +#: src/include/sound/texts.rb:60 msgid "" "<p>\n" "If you do not want to adjust the volume now, check <b>Quick \n" @@ -795,8 +781,8 @@ "체크하십시오. 나중에 음량과 옵션을 설정할 수 있습니다.\n" "</p>\n" -#. help text - quick configuration 3/3 -#: src/include/sound/texts.rb:68 +#. help text - quick configuration 3/3 +#: src/include/sound/texts.rb:68 msgid "" "<P>\n" "To configure a card that was not detected, \n" @@ -808,8 +794,8 @@ "자세한 사운드 카드 설치</B>를 체크하십시오.\n" "</P>\n" -#. help text - sound card selection 1/2 -#: src/include/sound/texts.rb:76 +#. help text - sound card selection 1/2 +#: src/include/sound/texts.rb:76 msgid "" "<P>\n" "<b>Manually</b> choose the sound card to \n" @@ -823,8 +809,8 @@ "카드를 검색할 수 있습니다.\n" "</p>\n" -#. help text - sound card selection 2/2 -#: src/include/sound/texts.rb:84 +#. help text - sound card selection 2/2 +#: src/include/sound/texts.rb:84 msgid "" "<p>\n" "Select <b>All</b> to see the entire list of \n" @@ -836,8 +822,8 @@ "<b>전체</b>를 선택하십시오.\n" "</p>\n" -#. help text - which sound card to configure 1/2 -#: src/include/sound/texts.rb:92 +#. help text - which sound card to configure 1/2 +#: src/include/sound/texts.rb:92 msgid "" "<p>\n" "Select the type of card to configure.\n" @@ -847,8 +833,8 @@ "설정하고자 하는 카드의 타입을 선택하세요.\n" "</p>\n" -#. help text - which sound card to configure 2/2 -#: src/include/sound/texts.rb:98 +#. help text - which sound card to configure 2/2 +#: src/include/sound/texts.rb:98 msgid "" "<p>\n" "If the list contains <b>autodetected</b> cards not yet \n" @@ -861,9 +847,9 @@ "하나를 선택하고 계속됩니다. 그렇지 않으면 <b>수동 선택</b>을 사용하십시오.\n" "</p>\n" -#. To reset the sound configuration these programs must be terminated -#. (popup label message) -#: src/include/sound/texts.rb:108 src/include/sound/texts.rb:114 +#. To reset the sound configuration these programs must be terminated +#. (popup label message) +#: src/include/sound/texts.rb:108 src/include/sound/texts.rb:114 msgid "" "There are programs running that are currently using \n" "the audio device.\n" @@ -873,8 +859,8 @@ "실행중인 프로그램이 오디오 장치를 사용하고 있습니다.\n" "설정을 변경하려면 프로그램을 종료시켜야 합니다. 종료하시겠습니까?\n" -#. help text - options dialog 1/2 -#: src/include/sound/texts.rb:122 +#. help text - options dialog 1/2 +#: src/include/sound/texts.rb:122 msgid "" "<p>\n" "Here, modify options for the sound modules. \n" @@ -888,8 +874,8 @@ "손대지 말고 이 다이얼로그를 나가십시오.\n" "</p>\n" -#. help text - options dialog 2/2 -#: src/include/sound/texts.rb:130 +#. help text - options dialog 2/2 +#: src/include/sound/texts.rb:130 msgid "" "<p>\n" "Choose the option to set then use <b>Set</b> \n" @@ -902,15 +888,13 @@ msgstr "" "<p>\n" "설정하는 옵션을 새로운 값으로 사용하려면 <b>설정을</b> 선택하십시오.\n" -"만일 선택된 옵션의 가능한 값을 알고있다면 <B>가능한 값</B>을 선택 하시면됩니" -"다. \n" +"만일 선택된 옵션의 가능한 값을 알고있다면 <B>가능한 값</B>을 선택 하시면됩니다. \n" "모든 값을 다시 설정하고자 한다면 <b>전체 재설정</b>을 누르십시오.\n" -"수치는 10진수 또는 16진수로 넣을수 있습니다. (16진수는 <b>Ox</b>를 앞에 붙일" -"수 있습니다).\n" +"수치는 10진수 또는 16진수로 넣을수 있습니다. (16진수는 <b>Ox</b>를 앞에 붙일수 있습니다).\n" "</p>\n" -#. help text - mixer setting 1/4 -#: src/include/sound/texts.rb:142 +#. help text - mixer setting 1/4 +#: src/include/sound/texts.rb:142 msgid "" "<p>\n" "Adjust the volume.\n" @@ -920,8 +904,8 @@ "음량 조절.\n" "</p>\n" -#. help text - mixer setting 2/4 -#: src/include/sound/texts.rb:144 +#. help text - mixer setting 2/4 +#: src/include/sound/texts.rb:144 msgid "" "<p>\n" "Test your sound card by pressing <b>Test</b>.\n" @@ -933,8 +917,8 @@ "\n" "</p>\n" -#. help text - mixer setting 3/4 -#: src/include/sound/texts.rb:151 +#. help text - mixer setting 3/4 +#: src/include/sound/texts.rb:151 msgid "" "<p>\n" "After configuration is complete, use <b>amixer</b> \n" @@ -945,8 +929,8 @@ "선택해서 볼륨을 조절하십시오.\n" "</p>\n" -#. help text - mixer setting 4/4 -#: src/include/sound/texts.rb:158 +#. help text - mixer setting 4/4 +#: src/include/sound/texts.rb:158 msgid "" "<p><b>WARNING:</b> Start testing your\n" "sound card with <b>very</b> low volume settings to prevent \n" @@ -957,8 +941,8 @@ "주지 않기위해 낮은 볼륨으로 테스트를 시작하십시오.\n" "</p>\n" -#. warning/question message -#: src/include/sound/texts.rb:166 +#. warning/question message +#: src/include/sound/texts.rb:166 msgid "" "Configuring this sound card on some Sony VAIO notebooks \n" "may fail if X is running. This can be avoided by setting the\n" @@ -970,13 +954,13 @@ "로 설정하거나 X-윈도우 상태가 아닌 상태에서 구성할 때 피할 수 있습니다.\n" "실행하시겠습니까?\n" -#. error message -#: src/include/sound/texts.rb:174 +#. error message +#: src/include/sound/texts.rb:174 msgid "Error while saving '/etc/modules.conf'.\n" msgstr "'/etc/modules.conf' 파일 저장중 오류.\n" -#. list of error -#: src/include/sound/texts.rb:177 +#. list of error +#: src/include/sound/texts.rb:177 msgid "" "These errors occurred during saving configuration:\n" "%1" @@ -984,8 +968,8 @@ "저장하는 동안 다음과 같은 에러가 발생했습니다:\n" "%1" -#. information message - success -#: src/include/sound/texts.rb:180 +#. information message - success +#: src/include/sound/texts.rb:180 msgid "" "The sound card was successfully configured.\n" "It is now available for use.\n" @@ -993,21 +977,21 @@ "사운드 카드는 성공적으로 구성되었습니다.\n" "지금 바로 사용할 수 있습니다.\n" -#: src/include/sound/texts.rb:183 +#: src/include/sound/texts.rb:183 msgid "The sound configuration was saved." msgstr "사운드 설정이 저장되었습니다." -#. error message -#: src/include/sound/texts.rb:186 +#. error message +#: src/include/sound/texts.rb:186 msgid "Error while saving file: %1 \n" msgstr "%1 파일 저장중 오류 \n" -#. error message -#: src/include/sound/texts.rb:189 +#. error message +#: src/include/sound/texts.rb:189 msgid "Error while setting volume.\n" msgstr "음량 설정중 오류 \n" -#: src/include/sound/texts.rb:190 +#: src/include/sound/texts.rb:190 msgid "" "The sound volume and configuration\n" "for the sound card \n" @@ -1016,34 +1000,34 @@ "사운드 카드의 음량설정이\n" "지금 저장될 것입니다.\n" -#: src/include/sound/texts.rb:195 +#: src/include/sound/texts.rb:195 msgid "The sound configuration will be saved now." msgstr "사운드 카드의 설정이 지금 저장될것입니다." -#. this is the second part of message "The sound card 'sbLive' will be configured as the first card" -#: src/include/sound/texts.rb:198 +#. this is the second part of message "The sound card 'sbLive' will be configured as the first card" +#: src/include/sound/texts.rb:198 msgid "will be configured as the first sound card (%1)" msgstr "첫번째 사운드 카드로 구성됩니다.(%1)" -#: src/include/sound/texts.rb:199 +#: src/include/sound/texts.rb:199 msgid "will be configured as the second sound card (%1)" msgstr "두번째 사운드 카드로 구성됩니다.(%1)" -#: src/include/sound/texts.rb:200 +#: src/include/sound/texts.rb:200 msgid "will be configured as the third sound card (%1)" msgstr "세번째 사운드 카드로 구성됩니다.(%1)" -#: src/include/sound/texts.rb:201 +#: src/include/sound/texts.rb:201 msgid "will be configured as the %2th sound card (%1)" msgstr "%2th 사운드 카드로 구성됩니다.(%1)" -#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) -#: src/include/sound/texts.rb:205 +#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) +#: src/include/sound/texts.rb:205 msgid "Install SoundFonts" msgstr "사운드폰트 설치" -#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) -#: src/include/sound/texts.rb:208 +#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) +#: src/include/sound/texts.rb:208 msgid "" "Should YaST2 install the wavetable SoundFont-files from \n" "your Soundblaster Live! or AWE driver CD?\n" @@ -1051,7 +1035,7 @@ "YaST2 에 wavetable 사운드 폰트 파일을 설치하려면\n" "Soundblaster Live! 또는 AWE 드라이버 CD가 있어야 합니다.\n" -#: src/include/sound/texts.rb:211 +#: src/include/sound/texts.rb:211 msgid "" "Insert the driver CD for the Soundblaster Live! or AWE card\n" "in the CD-ROM drive.\n" @@ -1059,22 +1043,22 @@ "시디롬 드라이브에 사운드 블러스터 라이브! 또는 AWE 카드\n" "드라이버 시디를 넣으십시오.\n" -#. To translators: the message below will look like this: "14 SoundFont-files have been installed in /usr/share/..." -#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) -#: src/include/sound/texts.rb:217 +#. To translators: the message below will look like this: "14 SoundFont-files have been installed in /usr/share/..." +#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) +#: src/include/sound/texts.rb:217 msgid "%1 SoundFont-files have been installed in %2." msgstr "%1 사운드폰트-파일이 %2에 설치되었습니다." -#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) -#: src/include/sound/texts.rb:220 +#. do not translate "SoundFont" term (see http://en.wikipedia.org/wiki/Sound_font) +#: src/include/sound/texts.rb:220 msgid "No SoundFont-files found." msgstr "사운드폰트-파일이 없습니다." -#: src/include/sound/texts.rb:221 +#: src/include/sound/texts.rb:221 msgid "Would you like to change the CD and retry ?" msgstr "CD를 바꾸고 다시 시도 하시겠습니까?" -#: src/include/sound/texts.rb:222 +#: src/include/sound/texts.rb:222 msgid "" "'%1' and '%2' sound cards were autodetected on your system. \n" "For proper functionality, skip the '%1' sound card and \n" @@ -1084,7 +1068,7 @@ "적절한 작동을 위해, '%1'는 건너뛰고\n" "오직 '%2'를 설정하십시오.\n" -#: src/include/sound/texts.rb:227 +#: src/include/sound/texts.rb:227 msgid "" "<P>\n" "Hardware detection found a new sound card. To configure it, \n" @@ -1097,7 +1081,7 @@ "<B>Configure</B>를 눌러 리스트 안의 적절한 항목을 선택하십시오.\n" "</P>\n" -#: src/include/sound/texts.rb:234 +#: src/include/sound/texts.rb:234 msgid "" "<P>\n" "Press <B>Change</B> to configure cards already installed.\n" @@ -1107,7 +1091,7 @@ "이미 설치되어 있는 카드를 구성하려면 <B>변경</B>을 누르십시오.\n" "</P>\n" -#: src/include/sound/texts.rb:239 +#: src/include/sound/texts.rb:239 msgid "" "<P>\n" "To save the current configuration, press <B>Finish</B>.\n" @@ -1117,12 +1101,12 @@ "<B>완료</B>를 눌러 현재 설정을 저장하십시오.\n" "</P>\n" -#. sound system dependent part: -#: src/include/sound/texts.rb:251 +#. sound system dependent part: +#: src/include/sound/texts.rb:251 msgid "<p><big><b>Sound Cards</b><big></p>" msgstr "<p><big><b>사운드 카드</b><big></p>" -#: src/include/sound/texts.rb:252 +#: src/include/sound/texts.rb:252 msgid "" "<P>Select an unconfigured card from the list and press <B>Edit</B> to\n" "configure it. If the card was not detected, press <B>Add</B> and\n" @@ -1132,7 +1116,7 @@ "구성하십시오. 카드가 검색되지 않았으면 <B>추가</B>를 누르고 카드를 수동으로\n" " 구성하십시오.</P>\n" -#: src/include/sound/texts.rb:257 +#: src/include/sound/texts.rb:257 msgid "" "<P>\n" "To change the configuration of a card, select the card.\n" @@ -1144,7 +1128,7 @@ " <B>편집</B>을 누르십시오.\n" " </P>\n" -#: src/include/sound/texts.rb:263 +#: src/include/sound/texts.rb:263 msgid "" "<p>\n" "Use <b>Other</b> to set the volume of the selected card or configure\n" @@ -1158,7 +1142,7 @@ "선택한 카드를 테스트하려면 <b>테스트 소리 재생</b>을 사용하십시오.\n" "</p>\n" -#: src/include/sound/texts.rb:270 +#: src/include/sound/texts.rb:270 msgid "" "<P>PulseAudio daemon can be used to play sounds.\n" "Use <B>PulseAudio Configuration</B> to enable or disable it.</P>\n" @@ -1166,32 +1150,29 @@ "<P>PulseAudio 데몬을 사용하여 사운드를 재생할 수 있습니다.\n" "<B>PulseAudio 구성</B>을 사용하여 활성화하거나 비활성화하십시오.</P>\n" -#: src/include/sound/texts.rb:273 +#: src/include/sound/texts.rb:273 msgid "" -"<p>The sound device with index 0 is the default device used by system and " -"applications.\n" +"<p>The sound device with index 0 is the default device used by system and applications.\n" "Use <b>Other</b> to set the selected sound device as the primary device.</p>" msgstr "" -"<p>인덱스가 0인 사운드 장치가 시스템 및 응용 프로그램에서 사용하는 기본 장치" -"입니다.\n" +"<p>인덱스가 0인 사운드 장치가 시스템 및 응용 프로그램에서 사용하는 기본 장치입니다.\n" "선택한 사운드 장치를 기본 장치로 설정하려면 <b>기타</b>를 사용하십시오.</p>" -#: src/include/sound/texts.rb:276 +#: src/include/sound/texts.rb:276 msgid "" "The applications which use OSS (Open Sound System) can use the software\n" -"mixer by using aoss wrapper. Use command <tt>aoss <application></tt> " -"to\n" +"mixer by using aoss wrapper. Use command <tt>aoss <application></tt> to\n" "start the application." msgstr "" "OSS(Open Sound System)를 사용하는 응용 프로그램은 aoss 래퍼를 사용하여\n" "소프트웨어 믹서를 사용할 수 있습니다. 응용 프로그램을 시작하려면\n" " <tt>aoss <application></tt> 명령을 사용하십시오." -#: src/include/sound/texts.rb:286 src/include/sound/texts.rb:316 +#: src/include/sound/texts.rb:286 src/include/sound/texts.rb:316 msgid "<p>An error has occurred. </p>" msgstr "<p>에러가 발생했습니다. </p>" -#: src/include/sound/texts.rb:287 +#: src/include/sound/texts.rb:287 msgid "" "<p>\n" "If the the problem persists, try passing \n" @@ -1206,7 +1187,7 @@ "또는 다른 모듈로 시도해 보십시오.\n" "</p>\n" -#: src/include/sound/texts.rb:300 +#: src/include/sound/texts.rb:300 msgid "" "<p>\n" "This is the complete sound card list. Use the <b>Finish</b> button \n" @@ -1218,7 +1199,7 @@ "<b>완료</b>버튼을 사용하십시오.\n" "</p>\n" -#: src/include/sound/texts.rb:306 +#: src/include/sound/texts.rb:306 msgid "" "<p>\n" "Use <b>Delete</b> to remove a configured sound card. \n" @@ -1230,64 +1211,64 @@ "<b>사운드 카드 추가</b>를 사용하여 사운드 카드를 추가할 수 있습니다.\n" "</p>\n" -#: src/include/sound/texts.rb:317 +#: src/include/sound/texts.rb:317 msgid "<p>You can try to pass some <b>options</b> to the module.</p>" msgstr "<p>이 모듈의 몇몇 <b>옵션</b>을 생략하십시오.</p>" -#. this is the first part of message "The sound card 'cardname' -#. will be configured as the first snd card" -#: src/include/sound/ui.rb:73 +#. this is the first part of message "The sound card 'cardname' +#. will be configured as the first snd card" +#: src/include/sound/ui.rb:73 msgid "The sound card\n" msgstr "사운드 카드\n" -#. radio button label - type of setup -#: src/include/sound/ui.rb:86 +#. radio button label - type of setup +#: src/include/sound/ui.rb:86 msgid "&Quick automatic setup" msgstr "빠른 자동 설정(&Q)" -#. radio button label - type of setup -#: src/include/sound/ui.rb:94 +#. radio button label - type of setup +#: src/include/sound/ui.rb:94 msgid "Normal &setup" msgstr "일반 설정(&S)" -#. radio button label - type of setup -#: src/include/sound/ui.rb:101 +#. radio button label - type of setup +#: src/include/sound/ui.rb:101 msgid "Advanced setup with possibility to change &options" msgstr "옵션 변경이 가능한 고급 설정(&O)" -#. dialog header -#: src/include/sound/ui.rb:123 +#. dialog header +#: src/include/sound/ui.rb:123 msgid "Sound Card Configuration" msgstr "사운드 카드 구성" -#. volume slider label -#. volume slider label -#: src/include/sound/volume.rb:51 src/include/sound/volume.rb:62 +#. volume slider label +#. volume slider label +#: src/include/sound/volume.rb:51 src/include/sound/volume.rb:62 msgid "&Volume" msgstr "음량(&V)" -#. dialog title -#: src/include/sound/volume.rb:76 +#. dialog title +#: src/include/sound/volume.rb:76 msgid "Settings for sound card" msgstr "사운드 카드 설정" -#. frame label -#: src/include/sound/volume.rb:82 +#. frame label +#: src/include/sound/volume.rb:82 msgid "Volume Adjust and Test" msgstr "음량 조절과 테스트" -#. message label -#: src/include/sound/volume.rb:93 +#. message label +#: src/include/sound/volume.rb:93 msgid "Press 'Test' to start playing sound sample" msgstr "사운드 샘플을 연주를 시작하려면 '테스트'를 누르십시오." -#. dialog title -#: src/include/sound/volume.rb:134 +#. dialog title +#: src/include/sound/volume.rb:134 msgid "Sound Card Volume" msgstr "사운드 카드 볼륨" -#. error message -#: src/include/sound/volume.rb:203 +#. error message +#: src/include/sound/volume.rb:203 msgid "" "Please try to configure this sound card manually \n" "using the \"Cirrus Logic CS4232\" or \"Cirrus \n" @@ -1298,13 +1279,13 @@ "사용해서 수동으로 사운드카드를 설정해보십시오.\n" "설정하기 위한 설정 값들은 '고급설정'을 사용하시면 됩니다." -#. error message -#: src/include/sound/volume.rb:214 +#. error message +#: src/include/sound/volume.rb:214 msgid "An error occurred during the installation of" msgstr "설치 도중 오류가 발생했습니다:" -#. popup message: test audio file was not found -#: src/include/sound/volume_routines.rb:118 +#. popup message: test audio file was not found +#: src/include/sound/volume_routines.rb:118 msgid "" "Cannot find file:\n" "%1\n" @@ -1314,22 +1295,22 @@ "%1\n" "(테스트 오디오 파일)" -#. popup question -#: src/include/sound/wizards.rb:56 +#. popup question +#: src/include/sound/wizards.rb:56 msgid "Do you really want to delete this entry?" msgstr "이 항목을 정말 지우시겠습니까?" -#. part of a summary text (PulseAudio is disabled/enabled) -#: src/modules/PulseAudio.rb:175 +#. part of a summary text (PulseAudio is disabled/enabled) +#: src/modules/PulseAudio.rb:175 msgid "Enabled" msgstr "활성화" -#: src/modules/PulseAudio.rb:175 +#: src/modules/PulseAudio.rb:175 msgid "Disabled" msgstr "비활성화" -#. yes/no popup text, %1 is chip name -#: src/modules/Sound.rb:188 +#. yes/no popup text, %1 is chip name +#: src/modules/Sound.rb:188 msgid "" "It looks like probing the chip\n" "%1\n" @@ -1343,8 +1324,8 @@ "\n" "그 칩을 다시 검사하시겠습니까?\n" -#. label -#: src/modules/Sound.rb:263 +#. label +#: src/modules/Sound.rb:263 msgid "" "No card was found.\n" "Attempt to detect the presence some old chips?\n" @@ -1358,53 +1339,53 @@ "경고: 검사 진행에 약간의 시간이 걸릴수 있고\n" "시스템을 불안정하게 만들수도 있습니다.\n" -#. selection box label -#: src/modules/Sound.rb:275 +#. selection box label +#: src/modules/Sound.rb:275 msgid "&Select the Drivers to Probe" msgstr "검사할 장치 선택(&S)" -#. button label -#: src/modules/Sound.rb:280 +#. button label +#: src/modules/Sound.rb:280 msgid "&Yes, Probe" msgstr "예, 검사합니다.(&Y)" -#. popup dialog header -#: src/modules/Sound.rb:304 +#. popup dialog header +#: src/modules/Sound.rb:304 msgid "Probing:" msgstr "검색중:" -#. progress bar label -#: src/modules/Sound.rb:309 +#. progress bar label +#: src/modules/Sound.rb:309 msgid "Progress:" msgstr "진행률:" -#. label (%1 is name of the chip) -#: src/modules/Sound.rb:339 +#. label (%1 is name of the chip) +#: src/modules/Sound.rb:339 msgid "Card with %1 Chip" msgstr "칩 %1의 카드" -#. summary string, %1 is a list of packages -#: src/modules/Sound.rb:617 +#. summary string, %1 is a list of packages +#: src/modules/Sound.rb:617 msgid "Required packages to install: %1" msgstr "설치할 필수 패키지: %1" -#. separator for constructing package list -#: src/modules/Sound.rb:619 +#. separator for constructing package list +#: src/modules/Sound.rb:619 msgid ", " msgstr "," -#. sound Read dialog caption: -#: src/modules/Sound.rb:632 +#. sound Read dialog caption: +#: src/modules/Sound.rb:632 msgid "Initializing Sound Configuration" msgstr "사운드 설정 초기화 중입니다." -#. summary text: '(sound card is) Configured as snd-card-1' -#: src/modules/Sound.rb:855 +#. summary text: '(sound card is) Configured as snd-card-1' +#: src/modules/Sound.rb:855 msgid "Configured as %1." msgstr "%1(으)로 구성됨." -#. returns list of configured/proposed sound cards. -#. @return [Array] of maps: [$["name": "ASDASD", "card_no": 0]...] -#: src/modules/Sound.rb:1100 +#. returns list of configured/proposed sound cards. +#. @return [Array] of maps: [$["name": "ASDASD", "card_no": 0]...] +#: src/modules/Sound.rb:1100 msgid "Sound card" msgstr "사운드 카드" Modified: branches/SLE12-SP3/yast/ko/po/squid.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/squid.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/squid.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,483 +14,483 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xsquid module -#: src/clients/squid.rb:57 +#. Command line help text for the Xsquid module +#: src/clients/squid.rb:57 msgid "Configuration of Squid cache proxy" msgstr "Squid 캐시 프록시 구성" -#. ***************** SRC ************************ -#. ***************** SRC END ******************** -#. ***************** DST ************************ -#: src/include/squid/SquidACL_local_functions.rb:150 -#: src/include/squid/SquidACL_local_functions.rb:197 +#. ***************** SRC ************************ +#. ***************** SRC END ******************** +#. ***************** DST ************************ +#: src/include/squid/SquidACL_local_functions.rb:150 +#: src/include/squid/SquidACL_local_functions.rb:197 msgid "Invalid values." msgstr "잘못된 값입니다." -#. ***************** DST END ******************** -#. ***************** MYIP ************************ -#. * Uses same functions as DST -#. /****************** MYIP END ******************* -#. *************** SRCDOMAIN ******************** -#: src/include/squid/SquidACL_local_functions.rb:244 +#. ***************** DST END ******************** +#. ***************** MYIP ************************ +#. * Uses same functions as DST +#. /****************** MYIP END ******************* +#. *************** SRCDOMAIN ******************** +#: src/include/squid/SquidACL_local_functions.rb:244 msgid "Domain Name must not be empty." msgstr "도메인 이름은 비워둘 수 없습니다." -#. *************** SRCDOMAIN END **************** -#. *************** DSTDOMAIN ********************* -#. * Uses same functions as SRCDOMAIN. -#. /**************** DSTDOMAIN END **************** -#. *************** REGEXP *********************** -#. Returns universal widget for setting a regular expression. -#: src/include/squid/SquidACL_local_functions.rb:264 -#: src/include/squid/dialogs.rb:63 src/include/squid/popup_dialogs.rb:104 +#. *************** SRCDOMAIN END **************** +#. *************** DSTDOMAIN ********************* +#. * Uses same functions as SRCDOMAIN. +#. /**************** DSTDOMAIN END **************** +#. *************** REGEXP *********************** +#. Returns universal widget for setting a regular expression. +#: src/include/squid/SquidACL_local_functions.rb:264 +#: src/include/squid/dialogs.rb:63 src/include/squid/popup_dialogs.rb:104 msgid "Regular Expression" msgstr "정규식" -#: src/include/squid/SquidACL_local_functions.rb:268 -#: src/include/squid/popup_dialogs.rb:106 src/modules/SquidACL.rb:319 -#: src/modules/SquidACL.rb:342 +#: src/include/squid/SquidACL_local_functions.rb:268 +#: src/include/squid/popup_dialogs.rb:106 src/modules/SquidACL.rb:319 +#: src/modules/SquidACL.rb:342 msgid "Case Insensitive" msgstr "대소문자 무시" -#. Universal verification function for regular expression. -#: src/include/squid/SquidACL_local_functions.rb:305 +#. Universal verification function for regular expression. +#: src/include/squid/SquidACL_local_functions.rb:305 msgid "Regular Expression must not be empty." msgstr "정규식은 비워둘 수 없습니다." -#. *************** REGEXP END ******************* -#. *************** TIME ************************* -#: src/include/squid/SquidACL_local_functions.rb:369 +#. *************** REGEXP END ******************* +#. *************** TIME ************************* +#: src/include/squid/SquidACL_local_functions.rb:369 msgid "You must select at least one day." msgstr "1일 이상을 선택해야 합니다." -#: src/include/squid/SquidACL_local_functions.rb:372 +#: src/include/squid/SquidACL_local_functions.rb:372 msgid "Time is not set in correct format." msgstr "시간이 올바른 형식으로 설정되지 않았습니다." -#: src/include/squid/SquidACL_local_functions.rb:375 +#: src/include/squid/SquidACL_local_functions.rb:375 msgid "From must be less than To." msgstr "시작은 종료 전이어야 합니다." -#. *************** TIME END ********************* -#. *************** PORT ************************* -#. *************** PORT END ********************* -#. ************* MYPORT ************************* -#: src/include/squid/SquidACL_local_functions.rb:432 -#: src/include/squid/SquidACL_local_functions.rb:463 +#. *************** TIME END ********************* +#. *************** PORT ************************* +#. *************** PORT END ********************* +#. ************* MYPORT ************************* +#: src/include/squid/SquidACL_local_functions.rb:432 +#: src/include/squid/SquidACL_local_functions.rb:463 msgid "Invalid value." msgstr "잘못된 값입니다." -#. ************* MYPORT END ********************* -#. ************** PROTO ************************* -#: src/include/squid/SquidACL_local_functions.rb:495 +#. ************* MYPORT END ********************* +#. ************** PROTO ************************* +#: src/include/squid/SquidACL_local_functions.rb:495 msgid "Protocol must not be empty." msgstr "프로토콜은 비워둘 수 없습니다." -#. ************** MAXCONN END ******************* -#. ************** HEADER ************************ -#: src/include/squid/SquidACL_local_functions.rb:587 +#. ************** MAXCONN END ******************* +#. ************** HEADER ************************ +#: src/include/squid/SquidACL_local_functions.rb:587 msgid "Header Name and Regular Expression must not be empty." msgstr "헤더 이름과 정규식은 비워둘 수 없습니다." -#. error report -#: src/include/squid/SquidACL_local_functions.rb:630 +#. error report +#: src/include/squid/SquidACL_local_functions.rb:630 msgid "MAC Address must not be empty." msgstr "MAC 주소는 비워둘 수 없습니다." -#. error report -#: src/include/squid/SquidACL_local_functions.rb:634 +#. error report +#: src/include/squid/SquidACL_local_functions.rb:634 msgid "Incorrect format of MAC Address." msgstr "MAC 주소의 형식이 잘못되었습니다." -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/squid/complex.ycp -#. Package: Configuration of squid -#. Summary: Dialogs definitions -#. Authors: Daniel Fiser -#. -#. $Id: complex.ycp 29363 2006-03-24 08:20:43Z mzugec $ -#: src/include/squid/complex.rb:51 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/squid/complex.ycp +#. Package: Configuration of squid +#. Summary: Dialogs definitions +#. Authors: Daniel Fiser +#. +#. $Id: complex.ycp 29363 2006-03-24 08:20:43Z mzugec $ +#: src/include/squid/complex.rb:51 msgid "Squid" msgstr "Squid" -#: src/include/squid/complex.rb:64 +#: src/include/squid/complex.rb:64 msgid "When &Booting" msgstr "부팅 시(&B)" -#: src/include/squid/complex.rb:65 +#: src/include/squid/complex.rb:65 msgid "&Manually" msgstr "수동으로(&M)" -#: src/include/squid/complex.rb:68 +#: src/include/squid/complex.rb:68 msgid "When Booting" msgstr "부팅 시" -#: src/include/squid/complex.rb:69 src/modules/Squid.rb:1590 +#: src/include/squid/complex.rb:69 src/modules/Squid.rb:1590 msgid "Manually" msgstr "수동으로" -#: src/include/squid/complex.rb:76 +#: src/include/squid/complex.rb:76 msgid "Squid is running" msgstr "Squid가 실행 중입니다." -#: src/include/squid/complex.rb:77 +#: src/include/squid/complex.rb:77 msgid "Squid is not running" msgstr "Squid가 실행되고 있지 않습니다." -#: src/include/squid/complex.rb:78 +#: src/include/squid/complex.rb:78 msgid "&Start Squid Now" msgstr "지금 Squid 시작(&S)" -#: src/include/squid/complex.rb:79 +#: src/include/squid/complex.rb:79 msgid "S&top Squid Now" msgstr "지금 Squid 중지(&T)" -#: src/include/squid/complex.rb:84 +#: src/include/squid/complex.rb:84 msgid "Sa&ve Settings and Restart Squid Now" msgstr "지금 설정 저장 및 Squid 재시작(&V)" -#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! -#: src/include/squid/complex.rb:92 +#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! +#: src/include/squid/complex.rb:92 msgid "Start Squid Now" msgstr "지금 Squid 시작" -#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! -#: src/include/squid/complex.rb:94 +#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! +#: src/include/squid/complex.rb:94 msgid "Stop Squid Now" msgstr "지금 Squid 중지" -#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! -#: src/include/squid/complex.rb:96 +#. TRANSLATORS: part of help text - push button label, NO SHORTCUT!!! +#: src/include/squid/complex.rb:96 msgid "Save Settings and Restart Squid Now" msgstr "지금 설정 저장 및 Squid 재시작" -#: src/include/squid/complex.rb:104 +#: src/include/squid/complex.rb:104 msgid "Open Ports in Firewall" msgstr "방화벽에서 포트 열기" -#: src/include/squid/complex.rb:261 +#: src/include/squid/complex.rb:261 msgid "Firewall Settings" msgstr "방화벽 설정" -#: src/include/squid/complex.rb:268 src/include/squid/complex.rb:270 +#: src/include/squid/complex.rb:268 src/include/squid/complex.rb:270 msgid "Start-Up" msgstr "시작" -#: src/include/squid/complex.rb:277 +#: src/include/squid/complex.rb:277 msgid "HTTP Ports Setting" msgstr "HTTP 포트 설정" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/squid/dialogs.ycp -#. Package: Configuration of squid -#. Summary: Dialogs definitions -#. Authors: Daniel Fiser -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/squid/complex.rb:279 src/include/squid/dialogs.rb:40 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/squid/dialogs.ycp +#. Package: Configuration of squid +#. Summary: Dialogs definitions +#. Authors: Daniel Fiser +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/squid/complex.rb:279 src/include/squid/dialogs.rb:40 msgid "HTTP Ports" msgstr "HTTP 포트" -#: src/include/squid/complex.rb:286 +#: src/include/squid/complex.rb:286 msgid "Refresh Patterns Setting" msgstr "새로 고침 패턴 설정" -#: src/include/squid/complex.rb:288 src/include/squid/dialogs.rb:57 +#: src/include/squid/complex.rb:288 src/include/squid/dialogs.rb:57 msgid "Refresh Patterns" msgstr "새로 고침 패턴" -#: src/include/squid/complex.rb:295 src/include/squid/complex.rb:297 -#: src/include/squid/dialogs.rb:92 +#: src/include/squid/complex.rb:295 src/include/squid/complex.rb:297 +#: src/include/squid/dialogs.rb:92 msgid "Cache Setting" msgstr "캐시 설정" -#: src/include/squid/complex.rb:304 +#: src/include/squid/complex.rb:304 msgid "Cache Directory Setting" msgstr "캐시 디렉토리 설정" -#. `HBox( -#. `HSpacing(3), -#. `Frame(_("Cache Setting"), -#. `HBox( -#. `HWeight(1,`VBox( -#. `VWeight(1, `HBox( -#. `IntField(`id("cache_mem"), _("C&ache Memory"), 1, 99999, 10), -#. sizeUnitWidget("cache_mem_units") -#. )), -#. `VSpacing(0.4), -#. `VWeight(1, `HBox( -#. `IntField(`id("cache_max_object_size"), _("Ma&x Object Size"), 0, 99999, 0), -#. sizeUnitWidget("cache_max_object_size_units") -#. )), -#. `VSpacing(0.4), -#. `VWeight(1, `HBox( -#. `IntField(`id("cache_swap_low"), _("Swap &Low-Water Mark (in percents)"), 0, 100, 0) -#. )), -#. `VSpacing(0.4), -#. `Left(`VWeight(1, `HBox( -#. `ComboBox(`id("cache_replacement_policy"), -#. _("&Cache Replacement Policy"), -#. [`item("lru"), `item("heap GDSF"), `item("heap LFUDA"), `item("heap LRU")]) -#. ))) -#. )), -#. `HSpacing(3), -#. `HWeight(1,`VBox( -#. `VWeight(1, `HBox(`Empty())), -#. `VSpacing(0.4), -#. `VWeight(1, `HBox( -#. `IntField(`id("cache_min_object_size"), _("M&in Object Size"), 0, 99999, 0), -#. sizeUnitWidget("cache_min_object_size_units") -#. )), -#. `VSpacing(0.4), -#. `VWeight(1, `HBox( -#. `IntField(`id("cache_swap_high"), _("Swap &High-Water Mark (in percents)"), 0, 100, 0) -#. )), -#. `VSpacing(0.4), -#. `Left(`VWeight(1, `HBox( -#. `ComboBox(`id("memory_replacement_policy"), -#. _("&Memory Replacement Policy"), -#. [`item("lru"), `item("heap GDSF"), `item("heap LFUDA"), `item("heap LRU")]) -#. ))) -#. )) -#. ) -#. ), -#. `HSpacing(3) -#. ); -#. cache_swap_low <= cache_swap_high -#: src/include/squid/complex.rb:306 src/include/squid/dialogs.rb:249 -#: src/include/squid/handlers.rb:224 +#. `HBox( +#. `HSpacing(3), +#. `Frame(_("Cache Setting"), +#. `HBox( +#. `HWeight(1,`VBox( +#. `VWeight(1, `HBox( +#. `IntField(`id("cache_mem"), _("C&ache Memory"), 1, 99999, 10), +#. sizeUnitWidget("cache_mem_units") +#. )), +#. `VSpacing(0.4), +#. `VWeight(1, `HBox( +#. `IntField(`id("cache_max_object_size"), _("Ma&x Object Size"), 0, 99999, 0), +#. sizeUnitWidget("cache_max_object_size_units") +#. )), +#. `VSpacing(0.4), +#. `VWeight(1, `HBox( +#. `IntField(`id("cache_swap_low"), _("Swap &Low-Water Mark (in percents)"), 0, 100, 0) +#. )), +#. `VSpacing(0.4), +#. `Left(`VWeight(1, `HBox( +#. `ComboBox(`id("cache_replacement_policy"), +#. _("&Cache Replacement Policy"), +#. [`item("lru"), `item("heap GDSF"), `item("heap LFUDA"), `item("heap LRU")]) +#. ))) +#. )), +#. `HSpacing(3), +#. `HWeight(1,`VBox( +#. `VWeight(1, `HBox(`Empty())), +#. `VSpacing(0.4), +#. `VWeight(1, `HBox( +#. `IntField(`id("cache_min_object_size"), _("M&in Object Size"), 0, 99999, 0), +#. sizeUnitWidget("cache_min_object_size_units") +#. )), +#. `VSpacing(0.4), +#. `VWeight(1, `HBox( +#. `IntField(`id("cache_swap_high"), _("Swap &High-Water Mark (in percents)"), 0, 100, 0) +#. )), +#. `VSpacing(0.4), +#. `Left(`VWeight(1, `HBox( +#. `ComboBox(`id("memory_replacement_policy"), +#. _("&Memory Replacement Policy"), +#. [`item("lru"), `item("heap GDSF"), `item("heap LFUDA"), `item("heap LRU")]) +#. ))) +#. )) +#. ) +#. ), +#. `HSpacing(3) +#. ); +#. cache_swap_low <= cache_swap_high +#: src/include/squid/complex.rb:306 src/include/squid/dialogs.rb:249 +#: src/include/squid/handlers.rb:224 msgid "Cache Directory" msgstr "캐시 디렉토리" -#: src/include/squid/complex.rb:317 +#: src/include/squid/complex.rb:317 msgid "Access Control Setting" msgstr "액세스 제어 설정" -#: src/include/squid/complex.rb:319 src/include/squid/dialogs.rb:290 +#: src/include/squid/complex.rb:319 src/include/squid/dialogs.rb:290 msgid "Access Control" msgstr "액세스 제어" -#: src/include/squid/complex.rb:330 +#: src/include/squid/complex.rb:330 msgid "Logging and Timeouts Setting" msgstr "로깅 및 시간 제한 설정" -#: src/include/squid/complex.rb:332 +#: src/include/squid/complex.rb:332 msgid "Logging and Timeouts" msgstr "로깅 및 시간 제한" -#: src/include/squid/complex.rb:339 src/include/squid/dialogs.rb:369 +#: src/include/squid/complex.rb:339 src/include/squid/dialogs.rb:369 msgid "Miscellaneous Setting" msgstr "기타 설정" -#: src/include/squid/complex.rb:341 +#: src/include/squid/complex.rb:341 msgid "Miscellaneous" msgstr "기타" -#: src/include/squid/dialogs.rb:44 src/include/squid/popup_dialogs.rb:53 +#: src/include/squid/dialogs.rb:44 src/include/squid/popup_dialogs.rb:53 msgid "Host" msgstr "호스트" -#: src/include/squid/dialogs.rb:44 src/include/squid/popup_dialogs.rb:54 +#: src/include/squid/dialogs.rb:44 src/include/squid/popup_dialogs.rb:54 msgid "Port" msgstr "포트" -#: src/include/squid/dialogs.rb:44 +#: src/include/squid/dialogs.rb:44 msgid "Options" msgstr "옵션" -#. , _("Options") -#. table header, stands for minimum -#: src/include/squid/dialogs.rb:65 +#. , _("Options") +#. table header, stands for minimum +#: src/include/squid/dialogs.rb:65 msgid "Min" msgstr "최소" -#. table header -#: src/include/squid/dialogs.rb:67 src/include/squid/popup_dialogs.rb:111 +#. table header +#: src/include/squid/dialogs.rb:67 src/include/squid/popup_dialogs.rb:111 msgid "Percent" msgstr "퍼센트" -#. table header, stands for maximum -#: src/include/squid/dialogs.rb:69 +#. table header, stands for maximum +#: src/include/squid/dialogs.rb:69 msgid "Max" msgstr "최대" -#: src/include/squid/dialogs.rb:97 +#: src/include/squid/dialogs.rb:97 msgid "C&ache Memory" msgstr "캐시 메모리(&A)" -#: src/include/squid/dialogs.rb:107 +#: src/include/squid/dialogs.rb:107 msgid "Ma&x Object Size" msgstr "최대 객체 크기(&X)" -#: src/include/squid/dialogs.rb:121 +#: src/include/squid/dialogs.rb:121 msgid "M&in Object Size" msgstr "최소 객체 크기(&I)" -#: src/include/squid/dialogs.rb:135 +#: src/include/squid/dialogs.rb:135 msgid "Swap &Low-Water Mark (percentage)" msgstr "스왑 최소 수준(%)(&L)" -#: src/include/squid/dialogs.rb:148 +#: src/include/squid/dialogs.rb:148 msgid "Swap &High-Water Mark (percentage)" msgstr "스왑 최대 수준(%)(&H)" -#: src/include/squid/dialogs.rb:162 +#: src/include/squid/dialogs.rb:162 msgid "&Cache Replacement Policy" msgstr "캐시 교체 정책(&C)" -#: src/include/squid/dialogs.rb:180 +#: src/include/squid/dialogs.rb:180 msgid "&Memory Replacement Policy" msgstr "메모리 교체 정책(&M)" -#: src/include/squid/dialogs.rb:253 +#: src/include/squid/dialogs.rb:253 msgid "&Directory Name" msgstr "디렉토리 이름(&D)" -#: src/include/squid/dialogs.rb:258 +#: src/include/squid/dialogs.rb:258 msgid "&Size (in MB)" msgstr "크기(MB)(&S)" -#: src/include/squid/dialogs.rb:260 +#: src/include/squid/dialogs.rb:260 msgid "L&evel 1 Directories" msgstr "레벨 1 디렉토리(&E)" -#: src/include/squid/dialogs.rb:262 +#: src/include/squid/dialogs.rb:262 msgid "Le&vel 2 Directories" msgstr "레벨 2 디렉토리(&V)" -#: src/include/squid/dialogs.rb:273 src/include/squid/dialogs.rb:295 +#: src/include/squid/dialogs.rb:273 src/include/squid/dialogs.rb:295 msgid "ACL Groups" msgstr "ACL 그룹" -#: src/include/squid/dialogs.rb:277 src/include/squid/popup_dialogs.rb:330 +#: src/include/squid/dialogs.rb:277 src/include/squid/popup_dialogs.rb:330 msgid "Name" msgstr "이름" -#: src/include/squid/dialogs.rb:277 src/include/squid/popup_dialogs.rb:335 +#: src/include/squid/dialogs.rb:277 src/include/squid/popup_dialogs.rb:335 msgid "Type" msgstr "유형" -#: src/include/squid/dialogs.rb:277 +#: src/include/squid/dialogs.rb:277 msgid "Description" msgstr "설명" -#: src/include/squid/dialogs.rb:295 src/include/squid/popup_dialogs.rb:232 +#: src/include/squid/dialogs.rb:295 src/include/squid/popup_dialogs.rb:232 msgid "Allow/Deny" msgstr "허용/거부" -#: src/include/squid/dialogs.rb:317 +#: src/include/squid/dialogs.rb:317 msgid "Logging" msgstr "로깅" -#: src/include/squid/dialogs.rb:321 +#: src/include/squid/dialogs.rb:321 msgid "&Access Log" msgstr "액세스 로그(&A)" -#: src/include/squid/dialogs.rb:327 +#: src/include/squid/dialogs.rb:327 msgid "&Cache Log" msgstr "캐시 로그(&C)" -#: src/include/squid/dialogs.rb:333 +#: src/include/squid/dialogs.rb:333 msgid "Cache &Store Log" msgstr "캐시 저장 로그(&S)" -#: src/include/squid/dialogs.rb:345 +#: src/include/squid/dialogs.rb:345 msgid "Timeouts" msgstr "시간 제한" -#: src/include/squid/dialogs.rb:350 +#: src/include/squid/dialogs.rb:350 msgid "Connection &Timeout" msgstr "연결 시간 제한(&T)" -#: src/include/squid/dialogs.rb:358 +#: src/include/squid/dialogs.rb:358 msgid "Client &Lifetime" msgstr "클라이언트 수명(&L)" -#: src/include/squid/dialogs.rb:371 +#: src/include/squid/dialogs.rb:371 msgid "&Language of error messages" msgstr "오류 메시지 언어(&L)" -#: src/include/squid/dialogs.rb:373 +#: src/include/squid/dialogs.rb:373 msgid "&Administrator's email" msgstr "관리자 전자 메일(&A)" -#: src/include/squid/dialogs.rb:375 +#: src/include/squid/dialogs.rb:375 msgid "&Use FTP Passive Mode" msgstr "FTP 수동 모드 사용(&U)" -#: src/include/squid/handlers.rb:294 +#: src/include/squid/handlers.rb:294 msgid "Access Log" msgstr "액세스 로그" -#: src/include/squid/handlers.rb:297 +#: src/include/squid/handlers.rb:297 msgid "Cache Log" msgstr "캐시 로그" -#: src/include/squid/handlers.rb:300 +#: src/include/squid/handlers.rb:300 msgid "Cache Store Log" msgstr "캐시 저장 로그" -#. Returns a widget with setting of units -#: src/include/squid/helper_functions.rb:38 +#. Returns a widget with setting of units +#: src/include/squid/helper_functions.rb:38 msgid "&Units" msgstr "단위(&U)" -#. Returns a widget with setting of units -#: src/include/squid/helper_functions.rb:56 +#. Returns a widget with setting of units +#: src/include/squid/helper_functions.rb:56 msgid "seconds" msgstr "초" -#: src/include/squid/helper_functions.rb:57 +#: src/include/squid/helper_functions.rb:57 msgid "minutes" msgstr "분" -#: src/include/squid/helper_functions.rb:58 +#: src/include/squid/helper_functions.rb:58 msgid "hours" msgstr "시간" -#: src/include/squid/helper_functions.rb:59 +#: src/include/squid/helper_functions.rb:59 msgid "days" msgstr "일" -#. Read dialog help 1/2 -#: src/include/squid/helps.rb:34 +#. Read dialog help 1/2 +#: src/include/squid/helps.rb:34 msgid "" "<p><b><big>Initializing Squid Configuration</big></b><br>\n" "</p>\n" @@ -498,8 +498,8 @@ "<p><b><big>Squid 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/squid/helps.rb:38 +#. Read dialog help 2/2 +#: src/include/squid/helps.rb:38 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -507,8 +507,8 @@ "<p><b><big>초기화 중단 중:</big></b><br>\n" "지금 <b>중단</b>을 눌러 안전하게 구성 유틸리티를 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/squid/helps.rb:42 +#. Write dialog help 1/2 +#: src/include/squid/helps.rb:42 msgid "" "<p><b><big>Saving Squid Configuration</big></b><br>\n" "</p>\n" @@ -516,8 +516,8 @@ "<p><b><big>Squid 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/squid/helps.rb:46 +#. Write dialog help 2/2 +#: src/include/squid/helps.rb:46 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -529,8 +529,8 @@ "작업의 안전 여부를 알리는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Summary dialog help -#: src/include/squid/helps.rb:53 +#. Summary dialog help +#: src/include/squid/helps.rb:53 msgid "" "<p><b><big>Squid Configuration</big></b><br>\n" "Configure Squid here.<br></p>\n" @@ -538,8 +538,8 @@ "<p><b><big>Squid 구성</big></b><br>\n" "여기서 Squid를 구성합니다.<br></p>\n" -#. Ovreview dialog help -#: src/include/squid/helps.rb:57 +#. Ovreview dialog help +#: src/include/squid/helps.rb:57 msgid "" "<p><b><big>Squid Configuration Overview</big></b><br>\n" "Obtain an overview of installed squids and\n" @@ -549,8 +549,8 @@ "설치된 Squid 개요를 확인하고\n" "필요한 경우 구성을 편집합니다.<br></p>\n" -#. Http Ports Dialog -#: src/include/squid/helps.rb:63 +#. Http Ports Dialog +#: src/include/squid/helps.rb:63 msgid "" "<p>Define all ports where Squid will\n" "listen for clients' http requests.</p>\n" @@ -558,7 +558,7 @@ "<p>Squid에서\n" "클라이언트의 http 요청을 수신 대기하는 모든 포트를 정의합니다.</p>\n" -#: src/include/squid/helps.rb:66 +#: src/include/squid/helps.rb:66 msgid "" "<p><b>Host</b> can contain a hostname or IP address\n" "or remain empty.</p>\n" @@ -566,16 +566,12 @@ "<p><b>호스트</b>에는 호스트 이름 또는 IP 주소가 포함되거나\n" "비어 있을 수 있습니다.</p>\n" -#. Cache Dialog -#: src/include/squid/helps.rb:70 -msgid "" -"<p><b>Refresh Patterns</b> define how Squid treats the objects in the cache." -"</p>\n" -msgstr "" -"<p><b>새로 고침 패턴</b>은 Squid에서 캐시의 객체를 처리하는 방법을 정의합니" -"다.</p>\n" +#. Cache Dialog +#: src/include/squid/helps.rb:70 +msgid "<p><b>Refresh Patterns</b> define how Squid treats the objects in the cache.</p>\n" +msgstr "<p><b>새로 고침 패턴</b>은 Squid에서 캐시의 객체를 처리하는 방법을 정의합니다.</p>\n" -#: src/include/squid/helps.rb:73 +#: src/include/squid/helps.rb:73 msgid "" "<p>The refresh patterns are checked in the order listed here.\n" "The first matching entry is used.</p>\n" @@ -583,7 +579,7 @@ "<p>새로 고침 패턴은 여기에 나열된 순서대로 확인됩니다.\n" "일치하는 첫 번째 항목이 사용됩니다.</p>\n" -#: src/include/squid/helps.rb:76 +#: src/include/squid/helps.rb:76 msgid "" "<p><b>Min</b> determines how long (in minutes) an object should be\n" "considered fresh if no explicit expiry time is given.\n" @@ -591,7 +587,7 @@ "<p><b>최소</b>는 명시적 만료 시간이 지정되지 않은 경우\n" "객체를 최신 상태로 간주할 기간(분)을 결정합니다.\n" -#: src/include/squid/helps.rb:79 +#: src/include/squid/helps.rb:79 msgid "" "<p><b>Percent</b> is the percentage of the object's age (time since last\n" "modification). An object without explicit expiry time will be\n" @@ -601,7 +597,7 @@ "시간)입니다. 명시적 만료 시간이 없는 객체는\n" "최신 상태로 간주됩니다.</p>\n" -#: src/include/squid/helps.rb:84 +#: src/include/squid/helps.rb:84 msgid "" "<p><b>Max</b> is the upper limit of how long objects without an explicit\n" "expiry time will be considered fresh.</p>\n" @@ -609,25 +605,20 @@ "<p><b>최대</b>는 명시적 만료 시간이 없는 객체가 최신 상태로\n" "간주되는 기간의 상한입니다.</p>\n" -#. Cache 2 Dialog -#: src/include/squid/helps.rb:88 -msgid "" -"<p><b>Cache memory</b> defines the ideal amount of memory to be used for " -"objects.</p>" -msgstr "" -"<p><b>캐시 메모리</b>는 객체에 사용하기에 이상적인 메모리 양을 정의합니다." +#. Cache 2 Dialog +#: src/include/squid/helps.rb:88 +msgid "<p><b>Cache memory</b> defines the ideal amount of memory to be used for objects.</p>" +msgstr "<p><b>캐시 메모리</b>는 객체에 사용하기에 이상적인 메모리 양을 정의합니다.</p>" -#: src/include/squid/helps.rb:91 +#: src/include/squid/helps.rb:91 msgid "" "<p><b>Max Object Size</b> defines the maximum size for objects to be stored\n" "on the disk. Objects larger than this size will not be saved on disk.</p>\n" msgstr "" "<p><b>최대 객체 크기</b>는 디스크에 저장할 객체의\n" -"최대 크기를 정의합니다. 이 크기보다 큰 객체는 디스크에 저장되지 않습니다.\n" +"최대 크기를 정의합니다. 이 크기보다 큰 객체는 디스크에 저장되지 않습니다.</p>\n" -#: src/include/squid/helps.rb:94 +#: src/include/squid/helps.rb:94 msgid "" "<p><b>Min Object Size</b> specifies the minimum size for objects. Smaller \n" "objects will not be saved to the disk.</p>\n" @@ -635,7 +626,7 @@ "<p><b>최소 객체 크기</b>는 객체의 최소 크기를 지정합니다. 더 작은 \n" "객체는 디스크에 저장되지 않습니다.</p>\n" -#: src/include/squid/helps.rb:97 +#: src/include/squid/helps.rb:97 msgid "" "<p>Replacement begins when the swap (disk) usage is above the\n" "<b>Swap Low-Water Mark</b> and attempts to maintain utilization near the\n" @@ -651,13 +642,11 @@ "사용이 <b>스왑 최소 수준</b>에 가까워지면 매번 더 적은 교체가\n" "수행됩니다.\n" -#: src/include/squid/helps.rb:105 +#: src/include/squid/helps.rb:105 msgid "" -"<p><b>Cache Replacement Policy</b> determines which objects are to be " -"replaced\n" +"<p><b>Cache Replacement Policy</b> determines which objects are to be replaced\n" "when disk space is needed.\n" -"<b>Memory Replacement Policy</b> specifies the policy for object replacement " -"in\n" +"<b>Memory Replacement Policy</b> specifies the policy for object replacement in\n" "memory when space for new objects is not available.\n" "Policies could be:\n" "<table>\n" @@ -705,70 +694,55 @@ "</table>\n" "</p>" -#. Cache Directory -#: src/include/squid/helps.rb:132 -msgid "" -"<p><b>Directory Name</b> defines a top-level directory where cache swap " -"files will be stored.</p>" -msgstr "" -"<p><b>디렉토리 이름</b>은 캐시 스왑 파일이 보관될 최상위 디렉토리를 정의합니" -"다.</p>" +#. Cache Directory +#: src/include/squid/helps.rb:132 +msgid "<p><b>Directory Name</b> defines a top-level directory where cache swap files will be stored.</p>" +msgstr "<p><b>디렉토리 이름</b>은 캐시 스왑 파일이 보관될 최상위 디렉토리를 정의합니다.</p>" -#: src/include/squid/helps.rb:135 -msgid "" -"<p><b>Size</b> defines the amount of disk space (in MB) to use under this " -"directory.</p>" -msgstr "" -"<p><b>크기</b>는 이 디렉토리에 사용하는 디스크 공간(MB)을 정의합니다.</p>" +#: src/include/squid/helps.rb:135 +msgid "<p><b>Size</b> defines the amount of disk space (in MB) to use under this directory.</p>" +msgstr "<p><b>크기</b>는 이 디렉토리에 사용하는 디스크 공간(MB)을 정의합니다.</p>" -#: src/include/squid/helps.rb:138 +#: src/include/squid/helps.rb:138 msgid "" -"<p><b>Level 1 Directories</b> defines a number of first-level " -"subdirectories, \n" +"<p><b>Level 1 Directories</b> defines a number of first-level subdirectories, \n" "which will be created under the <b>Directory Name</b> directory.</p>\n" msgstr "" "<p><b>레벨 1 디렉토리</b>는 <b>디렉토리 이름</b> 디렉토리 아래에 생성되는 \n" "많은 첫 번째 레벨 하위 디렉토리를 정의합니다.</p>\n" -#: src/include/squid/helps.rb:141 +#: src/include/squid/helps.rb:141 msgid "" -"<p><b>Level 2 Directories</b> defines a number of second-level " -"subdirectories,\n" +"<p><b>Level 2 Directories</b> defines a number of second-level subdirectories,\n" "which will be created under each first-level directory.</p>\n" msgstr "" "<p><b>레벨 2 디렉토리</b>는 첫 번째 레벨 디렉토리 아래에 생성되는\n" "많은 두 번째 레벨 하위 디렉토리를 정의합니다.</p>\n" -#. ACL Groups -#: src/include/squid/helps.rb:145 -msgid "" -"<p>Access to the Squid server can be controlled via <b>ACL Groups</b>.</p>" -msgstr "" -"<p>Squid 서버에 대한 액세스는 <b>ACL 그룹</b>을 통해 제어할 수 있습니다.</p>" +#. ACL Groups +#: src/include/squid/helps.rb:145 +msgid "<p>Access to the Squid server can be controlled via <b>ACL Groups</b>.</p>" +msgstr "<p>Squid 서버에 대한 액세스는 <b>ACL 그룹</b>을 통해 제어할 수 있습니다.</p>" -#: src/include/squid/helps.rb:148 +#: src/include/squid/helps.rb:148 msgid "" -"<p><b>ACL Group</b> has various types and the description of ACL Group " -"depends\n" +"<p><b>ACL Group</b> has various types and the description of ACL Group depends\n" "on the particular type.</p>\n" msgstr "" "<p><b>ACL 그룹</b>에는 다양한 유형이 있으며 ACL 그룹 설명은\n" "특정 유형에 따라 달라집니다.</p>\n" -#: src/include/squid/helps.rb:151 +#: src/include/squid/helps.rb:151 msgid "" -"<p>In the <b>Access Control</b> table, access can be denied or allowed to " -"ACL Groups.\n" -"If there are more ACL Groups in one line, it means that access will be " -"allowed\n" +"<p>In the <b>Access Control</b> table, access can be denied or allowed to ACL Groups.\n" +"If there are more ACL Groups in one line, it means that access will be allowed\n" "or denied to members who belong to all ACL Groups at the same time.</p>\n" msgstr "" -"<p><b>액세스 제어</b> 테이블에서 ACL 그룹에 대한 액세스를 거부하거나 허용할 " -"수 있습니다.\n" +"<p><b>액세스 제어</b> 테이블에서 ACL 그룹에 대한 액세스를 거부하거나 허용할 수 있습니다.\n" "한 줄에 추가 ACL 그룹이 있는 경우 모든 ACL 그룹에 속하는\n" "구성원에게 동시에 액세스가 허용되거나 거부됨을 의미합니다.</p>\n" -#: src/include/squid/helps.rb:156 +#: src/include/squid/helps.rb:156 msgid "" "<p>The <b>Access Control</b> table is checked in the order listed here.\n" "The first matching entry is used.</p>\n" @@ -776,36 +750,30 @@ "<p><b>액세스 제어</b> 테이블은 여기에 나열된 순서대로 확인됩니다.\n" "일치하는 첫 번째 항목이 사용됩니다.</p>\n" -#. Logging and Timeouts Dialog -#: src/include/squid/helps.rb:160 -msgid "" -"<p><b>Access Log</b> defines the file in which client activities are logged." -"</p>" -msgstr "" -"<p><b>액세스 로그</b>는 클라이언트 활동이 로깅되는 파일을 정의합니다.</p>" +#. Logging and Timeouts Dialog +#: src/include/squid/helps.rb:160 +msgid "<p><b>Access Log</b> defines the file in which client activities are logged.</p>" +msgstr "<p><b>액세스 로그</b>는 클라이언트 활동이 로깅되는 파일을 정의합니다.</p>" -#: src/include/squid/helps.rb:163 +#: src/include/squid/helps.rb:163 msgid "" -"<p><b>Cache Log</b> defines the file in which general information about " -"your\n" +"<p><b>Cache Log</b> defines the file in which general information about your\n" "cache's behavior is logged.</p>\n" msgstr "" "<p><b>캐시 로그</b>는 캐시 동작에 대한 일반 정보가\n" "로깅되는 파일을 정의합니다.</p>\n" -#: src/include/squid/helps.rb:166 +#: src/include/squid/helps.rb:166 msgid "" -"<p><b>Cache Store Log</b> defines the location of the transaction log of " -"all\n" -"objects that are stored in the object store, as well as the time when an " -"object\n" +"<p><b>Cache Store Log</b> defines the location of the transaction log of all\n" +"objects that are stored in the object store, as well as the time when an object\n" "gets deleted. This option can be left empty.</p>\n" msgstr "" "<p><b>캐시 저장 로그</b>는 객체 저장소에 저장된 모든 객체의\n" "트랜잭션 로그 위치 및 객체가 삭제되는 시간을\n" "정의합니다. 이 옵션은 비워 둘 수 있습니다.</p>\n" -#: src/include/squid/helps.rb:171 +#: src/include/squid/helps.rb:171 msgid "" "<p>With <b>Emulate httpd Log</b> specify that Squid writes its\n" "<b>Access Log</b> in HTTPD common log file format.</p>\n" @@ -813,7 +781,7 @@ "<p><b>httpd 로그 에뮬레이트</b>는 Squid에서 해당\n" "<b>액세스 로그</b>를 HTTPD 일반 로그 파일 형식에 쓰도록 지정합니다.</p>\n" -#: src/include/squid/helps.rb:174 +#: src/include/squid/helps.rb:174 msgid "" "<p><b>Connection Timeout</b> is an option to force Squid to close\n" "connections after a specified time.</p>" @@ -821,17 +789,16 @@ "<p><b>연결 시간 제한</b>은 지정된 시간이 지나면 Squid가 강제로\n" "연결을 닫는 옵션입니다.</p>" -#: src/include/squid/helps.rb:177 +#: src/include/squid/helps.rb:177 msgid "" "<p><b>Client Lifetime</b> defines the maximum amount of time that a client\n" "(browser) is allowed to remain connected to the cache process.</p>" msgstr "" -"<p><b>클라이언트 수명</b>은 클라이언트(브라우저)가 캐시 프로세스에 연결 상태" -"를\n" +"<p><b>클라이언트 수명</b>은 클라이언트(브라우저)가 캐시 프로세스에 연결 상태를\n" "유지할 수 있는 최대 시간을 정의합니다.</p>" -#. Miscellaneous Dialog -#: src/include/squid/helps.rb:181 +#. Miscellaneous Dialog +#: src/include/squid/helps.rb:181 msgid "" "<p><b>Administrator's email</b> is the address which will be added to any\n" "error pages that are displayed to clients. Defaults to webmaster.</p>\n" @@ -839,100 +806,100 @@ "<p><b>관리자 전자 메일</b>은 클라이언트에게 표시되는 오류 페이지에\n" "추가될 주소입니다. 기본값은 webmaster입니다.</p>\n" -#. table cell -#: src/include/squid/inits.rb:73 src/include/squid/popup_dialogs.rb:55 +#. table cell +#: src/include/squid/inits.rb:73 src/include/squid/popup_dialogs.rb:55 msgid "Transparent" msgstr "투명" -#. **************** HTTP PORT ******************* -#. returns true if something added/edited otherwise false -#: src/include/squid/popup_dialogs.rb:48 +#. **************** HTTP PORT ******************* +#. returns true if something added/edited otherwise false +#: src/include/squid/popup_dialogs.rb:48 msgid "Add New HTTP Port" msgstr "새 HTTP 포트 추가" -#: src/include/squid/popup_dialogs.rb:49 +#: src/include/squid/popup_dialogs.rb:49 msgid "Edit Current HTTP Port" msgstr "현재 HTTP 포트 편집" -#. **************** HTTP PORT END *************** -#. **************** CACHE *********************** -#: src/include/squid/popup_dialogs.rb:95 +#. **************** HTTP PORT END *************** +#. **************** CACHE *********************** +#: src/include/squid/popup_dialogs.rb:95 msgid "Add New Refresh Pattern" msgstr "새 새로 고침 패턴 추가" -#: src/include/squid/popup_dialogs.rb:96 +#: src/include/squid/popup_dialogs.rb:96 msgid "Edit Current refresh Pattern" msgstr "현재 새로 고침 패턴 편집" -#: src/include/squid/popup_dialogs.rb:110 +#: src/include/squid/popup_dialogs.rb:110 msgid "Min (in minutes)" msgstr "최소(분)" -#: src/include/squid/popup_dialogs.rb:112 +#: src/include/squid/popup_dialogs.rb:112 msgid "Max (in minutes)" msgstr "최대(분)" -#. **************** CACHE END ******************* -#. **************** ACCESS CONTROL ************** -#: src/include/squid/popup_dialogs.rb:226 +#. **************** CACHE END ******************* +#. **************** ACCESS CONTROL ************** +#: src/include/squid/popup_dialogs.rb:226 msgid "Add New HTTP Access" msgstr "새 HTTP 액세스 추가" -#: src/include/squid/popup_dialogs.rb:226 +#: src/include/squid/popup_dialogs.rb:226 msgid "Edit HTTP Access" msgstr "HTTP 액세스 편집" -#: src/include/squid/popup_dialogs.rb:233 +#: src/include/squid/popup_dialogs.rb:233 msgid "Allow" msgstr "허용" -#: src/include/squid/popup_dialogs.rb:233 +#: src/include/squid/popup_dialogs.rb:233 msgid "Deny" msgstr "거부" -#. `VSpacing(), -#: src/include/squid/popup_dialogs.rb:239 +#. `VSpacing(), +#: src/include/squid/popup_dialogs.rb:239 msgid "ACL" msgstr "ACL" -#: src/include/squid/popup_dialogs.rb:244 +#: src/include/squid/popup_dialogs.rb:244 msgid "O&pposite" msgstr "반대(&P)" -#: src/include/squid/popup_dialogs.rb:251 +#: src/include/squid/popup_dialogs.rb:251 msgid "Add ACL" msgstr "ACL 추가" -#: src/include/squid/popup_dialogs.rb:254 +#: src/include/squid/popup_dialogs.rb:254 msgid "not" msgstr "아님" -#: src/include/squid/popup_dialogs.rb:322 +#: src/include/squid/popup_dialogs.rb:322 msgid "Add New ACL Group" msgstr "새 ACL 그룹 추가" -#: src/include/squid/popup_dialogs.rb:322 +#: src/include/squid/popup_dialogs.rb:322 msgid "Edit ACL Group" msgstr "ACL 그룹 편집" -#. **************** HTTP_PORT ******************* -#: src/include/squid/store_del.rb:64 +#. **************** HTTP_PORT ******************* +#: src/include/squid/store_del.rb:64 msgid "Port number must not be empty." msgstr "포트 번호는 비워둘 수 없습니다." -#: src/include/squid/store_del.rb:74 +#: src/include/squid/store_del.rb:74 msgid "Host must contain valid IP address or hostname." msgstr "호스트에는 유효한 IP 주소 또는 호스트 이름이 포함되어야 합니다." -#. **************** HTTP_PORT END *************** -#. ************* REFRESH_PATTERNS *************** -#: src/include/squid/store_del.rb:129 +#. **************** HTTP_PORT END *************** +#. ************* REFRESH_PATTERNS *************** +#: src/include/squid/store_del.rb:129 msgid "Regular expression must not be empty." msgstr "정규식은 비워둘 수 없습니다." -#. ************* REFRESH_PATTERNS END *********** -#. ************* CACHE DIALOG ******************* -#: src/include/squid/store_del.rb:202 src/include/squid/store_del.rb:292 +#. ************* REFRESH_PATTERNS END *********** +#. ************* CACHE DIALOG ******************* +#: src/include/squid/store_del.rb:202 src/include/squid/store_del.rb:292 msgid "" "Cache Memory + Size of Cache Directory\n" "must be higher than Max Object Size.\n" @@ -940,26 +907,26 @@ "캐시 메모리 + 캐시 디렉토리 크기는\n" "최대 객체 크기보다 커야 합니다.\n" -#: src/include/squid/store_del.rb:264 +#: src/include/squid/store_del.rb:264 msgid "Cache directory must not be empty." msgstr "캐시 디렉토리는 비워둘 수 없습니다." -#. ************* CACHE DIALOG END *************** -#. ************* HTTP_ACCESS ******************** -#: src/include/squid/store_del.rb:351 +#. ************* CACHE DIALOG END *************** +#. ************* HTTP_ACCESS ******************** +#: src/include/squid/store_del.rb:351 msgid "ACL table must not be empty." msgstr "ACL 테이블은 비워둘 수 없습니다." -#. test, if exists ACL with same name but different type -#: src/include/squid/store_del.rb:429 +#. test, if exists ACL with same name but different type +#: src/include/squid/store_del.rb:429 msgid "ACL Group '%1' already exists with different type.\n" msgstr "ACL 그룹 '%1'이(가) 이미 다른 유형으로 있습니다.\n" -#: src/include/squid/store_del.rb:433 +#: src/include/squid/store_del.rb:433 msgid "ACL Group '%1' must have type '%2'.\n" msgstr "ACL 그룹 '%1'은(는) '%2' 유형이어야 합니다.\n" -#: src/include/squid/store_del.rb:438 +#: src/include/squid/store_del.rb:438 msgid "" "If you want to change the type of this ACL Group, you must\n" "delete other ACL Groups with the same name before that.\n" @@ -967,8 +934,8 @@ "이 ACL 그룹의 유형을 변경하려면\n" "그전에 동일한 이름의 ACL 그룹을 삭제해야 합니다.\n" -#. test if changed ACL is used in http_access option. -#: src/include/squid/store_del.rb:453 +#. test if changed ACL is used in http_access option. +#: src/include/squid/store_del.rb:453 msgid "" "You can not change the name of this ACL Group, because \n" "it is used in the Access Control table.\n" @@ -976,7 +943,7 @@ "이 ACL 그룹은 액세스 제어 테이블에서 사용되고 있으므로 \n" "그룹의 이름을 변경할 수 없습니다.\n" -#: src/include/squid/store_del.rb:456 src/include/squid/store_del.rb:517 +#: src/include/squid/store_del.rb:456 src/include/squid/store_del.rb:517 msgid "" "If you want to change name of this ACL Group you must\n" "delete all of its occurrences in Access Control table." @@ -984,28 +951,26 @@ "이 ACL 그룹의 이름을 변경하려면\n" "액세스 제어 테이블에서 모든 발생을 삭제해야 합니다." -#. test if changed ACL is used in other option (not managed by thid module) -#: src/include/squid/store_del.rb:467 -msgid "" -"If you change the name of this ACL Group, these options might be affected: \n" -msgstr "" -"이 ACL 그룹의 이름을 변경하는 경우 다음 옵션이 영향을 받을 수 있습니다. \n" +#. test if changed ACL is used in other option (not managed by thid module) +#: src/include/squid/store_del.rb:467 +msgid "If you change the name of this ACL Group, these options might be affected: \n" +msgstr "이 ACL 그룹의 이름을 변경하는 경우 다음 옵션이 영향을 받을 수 있습니다. \n" -#: src/include/squid/store_del.rb:474 +#: src/include/squid/store_del.rb:474 msgid "Change name anyway" msgstr "이름 변경" -#: src/include/squid/store_del.rb:475 +#: src/include/squid/store_del.rb:475 msgid "Do not change name" msgstr "이름 변경 안 함" -#. test, if name is filled -#: src/include/squid/store_del.rb:485 +#. test, if name is filled +#: src/include/squid/store_del.rb:485 msgid "Name must not be empty." msgstr "이름은 비워둘 수 없습니다." -#. Report::Error( _("This ACL Group can't be deleted.\nIt's used in Access Control table.")); -#: src/include/squid/store_del.rb:514 +#. Report::Error( _("This ACL Group can't be deleted.\nIt's used in Access Control table.")); +#: src/include/squid/store_del.rb:514 msgid "" "You must not delete this ACL Group, because \n" "it is used in the Access Control table.\n" @@ -1013,645 +978,632 @@ "이 ACL 그룹은 액세스 제어 테이블에서 사용되고 있으므로 \n" "그룹을 삭제하면 안 됩니다.\n" -#: src/include/squid/store_del.rb:524 +#: src/include/squid/store_del.rb:524 msgid "If you delete this ACL Group, these options might be affected: \n" msgstr "이 ACL 그룹을 삭제하는 경우 다음 옵션이 영향을 받을 수 있습니다. \n" -#. + -#. _("Are you sure you want to delete this ACL Group?"); -#: src/include/squid/store_del.rb:535 +#. + +#. _("Are you sure you want to delete this ACL Group?"); +#: src/include/squid/store_del.rb:535 msgid "Delete anyway" msgstr "삭제" -#. Label::YesButton(), -#: src/include/squid/store_del.rb:536 +#. Label::YesButton(), +#: src/include/squid/store_del.rb:536 msgid "Do not delete" msgstr "삭제 안 함" -#. ************* ACL END ************************ -#. ******* LOGGING AND TIMEOUTS DIALOG ********** -#: src/include/squid/store_del.rb:578 +#. ************* ACL END ************************ +#. ******* LOGGING AND TIMEOUTS DIALOG ********** +#: src/include/squid/store_del.rb:578 msgid "Access Log must not be empty." msgstr "액세스 로그는 비워둘 수 없습니다." -#: src/include/squid/store_del.rb:588 +#: src/include/squid/store_del.rb:588 msgid "Cache Log must not be empty." msgstr "캐시 로그는 비워둘 수 없습니다." -#: src/include/squid/store_del.rb:599 +#: src/include/squid/store_del.rb:599 msgid "Incorrect pathname in Access Log field." msgstr "액세스 로그 필드의 경로 이름이 잘못되었습니다." -#: src/include/squid/store_del.rb:610 +#: src/include/squid/store_del.rb:610 msgid "Incorrect pathname in Cache Log field." msgstr "캐시 로그 필드의 경로 이름이 잘못되었습니다." -#: src/include/squid/store_del.rb:621 +#: src/include/squid/store_del.rb:621 msgid "Incorrect pathname in Cache Store Log field." msgstr "캐시 저장 로그 필드의 경로 이름이 잘못되었습니다." -#. ******* LOGGING AND TIMEOUTS DIALOG END ****** -#: src/include/squid/store_del.rb:684 +#. ******* LOGGING AND TIMEOUTS DIALOG END ****** +#: src/include/squid/store_del.rb:684 msgid "Administrator's email must not contain any white spaces." msgstr "관리자의 전자 메일에는 공백이 포함되면 안 됩니다." -#. Initialization dialog caption -#: src/include/squid/wizards.rb:85 +#. Initialization dialog caption +#: src/include/squid/wizards.rb:85 msgid "Squid Configuration" msgstr "Squid 구성" -#. Initialization dialog contents -#: src/include/squid/wizards.rb:87 +#. Initialization dialog contents +#: src/include/squid/wizards.rb:87 msgid "Initializing..." msgstr "초기화 중..." -#. Read all squid settings -#. @return true on success -#: src/modules/Squid.rb:1088 +#. Read all squid settings +#. @return true on success +#: src/modules/Squid.rb:1088 msgid "Initializing Squid Configuration" msgstr "Squid 구성 초기화" -#: src/modules/Squid.rb:1092 +#: src/modules/Squid.rb:1092 msgid "Read HTTP Ports from Config File." msgstr "구성 파일에서 HTTP 포트를 읽습니다." -#: src/modules/Squid.rb:1093 +#: src/modules/Squid.rb:1093 msgid "Read Refresh Patterns from Config File." msgstr "구성 파일에서 새로 고침 패턴을 읽습니다." -#: src/modules/Squid.rb:1094 +#: src/modules/Squid.rb:1094 msgid "Read ACL Groups from Config File." msgstr "구성 파일에서 ACL 그룹을 읽습니다." -#: src/modules/Squid.rb:1095 +#: src/modules/Squid.rb:1095 msgid "Read Access Control Table from Config File." msgstr "구성 파일에서 액세스 제어 테이블을 읽습니다." -#: src/modules/Squid.rb:1096 +#: src/modules/Squid.rb:1096 msgid "Read Other Settings." msgstr "기타 설정을 읽습니다." -#: src/modules/Squid.rb:1097 +#: src/modules/Squid.rb:1097 msgid "Read Service Status." msgstr "서비스 상태를 읽습니다." -#: src/modules/Squid.rb:1098 +#: src/modules/Squid.rb:1098 msgid "Read Firewall Settings." msgstr "방화벽 설정을 읽습니다." -#: src/modules/Squid.rb:1101 +#: src/modules/Squid.rb:1101 msgid "Reading HTTP Ports ..." msgstr "HTTP 포트를 읽는 중..." -#: src/modules/Squid.rb:1102 +#: src/modules/Squid.rb:1102 msgid "Reading Refresh Patterns ..." msgstr "새로 고침 패턴을 읽는 중..." -#: src/modules/Squid.rb:1103 +#: src/modules/Squid.rb:1103 msgid "Reading ACL Groups ..." msgstr "ACL 그룹을 읽는 중..." -#: src/modules/Squid.rb:1104 +#: src/modules/Squid.rb:1104 msgid "Reading Access Control Table ..." msgstr "액세스 제어 테이블을 읽는 중입니다." -#: src/modules/Squid.rb:1105 +#: src/modules/Squid.rb:1105 msgid "Reading Other Settings ..." msgstr "기타 설정을 읽는 중..." -#: src/modules/Squid.rb:1106 +#: src/modules/Squid.rb:1106 msgid "Reading Service Status ..." msgstr "서비스 상태를 읽는 중..." -#: src/modules/Squid.rb:1107 +#: src/modules/Squid.rb:1107 msgid "Reading Firewall Settings ..." msgstr "방화벽 설정을 읽는 중..." -#: src/modules/Squid.rb:1117 +#: src/modules/Squid.rb:1117 msgid "Cannot read configuration file." msgstr "구성 파일을 읽을 수 없습니다." -#: src/modules/Squid.rb:1122 +#: src/modules/Squid.rb:1122 msgid "Cannot read service status." msgstr "서비스 상태를 읽을 수 없습니다." -#. We do not set help text here, because it was set outside -#: src/modules/Squid.rb:1465 +#. We do not set help text here, because it was set outside +#: src/modules/Squid.rb:1465 msgid "Saving Squid Configuration" msgstr "Squid 구성 저장 중" -#. Progress stage 1/2 -#: src/modules/Squid.rb:1470 +#. Progress stage 1/2 +#: src/modules/Squid.rb:1470 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress stage 1/2 -#: src/modules/Squid.rb:1472 +#. Progress stage 1/2 +#: src/modules/Squid.rb:1472 msgid "Write firewall settings" msgstr "방화벽 설정 쓰기" -#. Progress stage 2/2 -#: src/modules/Squid.rb:1474 +#. Progress stage 2/2 +#: src/modules/Squid.rb:1474 msgid "Start Service" msgstr "서비스 시작" -#. Progress step 1/2 -#: src/modules/Squid.rb:1478 +#. Progress step 1/2 +#: src/modules/Squid.rb:1478 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Progress step 1/2 -#: src/modules/Squid.rb:1480 +#. Progress step 1/2 +#: src/modules/Squid.rb:1480 msgid "Writing firewall settings..." msgstr "방화벽 설정을 쓰는 중..." -#. Progress step 2/2 -#: src/modules/Squid.rb:1482 +#. Progress step 2/2 +#: src/modules/Squid.rb:1482 msgid "Starting Service..." msgstr "서비스 시작 중..." -#. Progress finished -#: src/modules/Squid.rb:1484 +#. Progress finished +#: src/modules/Squid.rb:1484 msgid "Finished" msgstr "완료됨" -#. write settings -#: src/modules/Squid.rb:1494 +#. write settings +#: src/modules/Squid.rb:1494 msgid "Cannot write settings." msgstr "설정을 쓸 수 없습니다." -#. firewall -#: src/modules/Squid.rb:1500 +#. firewall +#: src/modules/Squid.rb:1500 msgid "Cannot write firewall settings." msgstr "방화벽 설정을 쓸 수 없습니다." -#. Header -#: src/modules/Squid.rb:1584 +#. Header +#: src/modules/Squid.rb:1584 msgid "Squid Cache Proxy" msgstr "Squid 캐시 프록시" -#. Start daemon -#: src/modules/Squid.rb:1589 +#. Start daemon +#: src/modules/Squid.rb:1589 msgid "Start daemon: " msgstr "데몬 시작:" -#: src/modules/Squid.rb:1590 +#: src/modules/Squid.rb:1590 msgid "When booting" msgstr "부팅 시" -#. Http Ports -#: src/modules/Squid.rb:1594 +#. Http Ports +#: src/modules/Squid.rb:1594 msgid "Configured ports:" msgstr "구성된 포트:" -#: src/modules/Squid.rb:1611 +#: src/modules/Squid.rb:1611 msgid " (transparent)" msgstr " (전송)" -#. Cache directory -#: src/modules/Squid.rb:1625 +#. Cache directory +#: src/modules/Squid.rb:1625 msgid "Cache directory: " msgstr "캐시 디렉토리: " -#. ** -#. Unsupported ACLS: -#. * * * * * * * * * * * -#. ident, ident_regex, -#. src_as, dst_as, -#. proxy_auth, proxy_auth_regex, -#. snmp_community, -#. max_user_ip, -#. external, -#. urllogin, urlgroup -#. user_cert, ca_cert -#. ext_user -#. map of acl definition. format: -#. $[ -#. "type" : $[ "name" : "Name shown in dialogs", -#. "widget" : `WidgetDescribingThisType, -#. "widget_init" : FunctionWithInitsOfWidget, -#. "verification" : FunctionCalledToVerificateContentsOfWidget, -#. "options" : FunctionThatReturnsListOfOptions -#. ] -#. ] -#. -#. widget_init prototype: void FuncName(integer id_item) -#. verification prototype: boolean FuncName() -#. options prototype: list<string> FuncName() -#: src/modules/SquidACL.rb:68 +#. ** +#. Unsupported ACLS: +#. * * * * * * * * * * * +#. ident, ident_regex, +#. src_as, dst_as, +#. proxy_auth, proxy_auth_regex, +#. snmp_community, +#. max_user_ip, +#. external, +#. urllogin, urlgroup +#. user_cert, ca_cert +#. ext_user +#. map of acl definition. format: +#. $[ +#. "type" : $[ "name" : "Name shown in dialogs", +#. "widget" : `WidgetDescribingThisType, +#. "widget_init" : FunctionWithInitsOfWidget, +#. "verification" : FunctionCalledToVerificateContentsOfWidget, +#. "options" : FunctionThatReturnsListOfOptions +#. ] +#. ] +#. +#. widget_init prototype: void FuncName(integer id_item) +#. verification prototype: boolean FuncName() +#. options prototype: list<string> FuncName() +#: src/modules/SquidACL.rb:68 msgid "src" msgstr "src" -#. `TextEntry(`id("acl_addr1"), _("IP Address 1"), ""), -#. `Label(" - "), -#: src/modules/SquidACL.rb:74 +#. `TextEntry(`id("acl_addr1"), _("IP Address 1"), ""), +#. `Label(" - "), +#: src/modules/SquidACL.rb:74 msgid "IP Address or Range of IP Addresses" msgstr "IP 주소 또는 IP 주소 범위" -#. `Label("/"), -#: src/modules/SquidACL.rb:78 src/modules/SquidACL.rb:92 -#: src/modules/SquidACL.rb:106 +#. `Label("/"), +#: src/modules/SquidACL.rb:78 src/modules/SquidACL.rb:92 +#: src/modules/SquidACL.rb:106 msgid "Network Mask" msgstr "네트워크 마스크" -#: src/modules/SquidACL.rb:84 +#: src/modules/SquidACL.rb:84 msgid "The IP address of the requesting client." msgstr "요청 클라이언트의 IP 주소입니다." -#: src/modules/SquidACL.rb:89 +#: src/modules/SquidACL.rb:89 msgid "dst" msgstr "dst" -#: src/modules/SquidACL.rb:91 +#: src/modules/SquidACL.rb:91 msgid "IP Address" msgstr "IP 주소" -#: src/modules/SquidACL.rb:98 +#: src/modules/SquidACL.rb:98 msgid "Destination IP Address." msgstr "대상 IP 주소입니다." -#: src/modules/SquidACL.rb:103 +#: src/modules/SquidACL.rb:103 msgid "myip" msgstr "myip" -#: src/modules/SquidACL.rb:105 +#: src/modules/SquidACL.rb:105 msgid "Local IP Address" msgstr "로컬 IP 주소" -#: src/modules/SquidACL.rb:112 +#: src/modules/SquidACL.rb:112 msgid "The local IP address on which the client connection exists." msgstr "클라이언트 연결이 있는 로컬 IP 주소입니다." -#: src/modules/SquidACL.rb:119 +#: src/modules/SquidACL.rb:119 msgid "srcdomain" msgstr "srcdomain" -#: src/modules/SquidACL.rb:120 +#: src/modules/SquidACL.rb:120 msgid "Clients Domain Name" msgstr "클라이언트 도메인 이름" -#: src/modules/SquidACL.rb:131 +#: src/modules/SquidACL.rb:131 msgid "This type matches the client's domain name." msgstr "이 유형은 클라이언트의 도메인 이름과 일치합니다." -#: src/modules/SquidACL.rb:136 +#: src/modules/SquidACL.rb:136 msgid "dstdomain" msgstr "dstdomain" -#: src/modules/SquidACL.rb:137 +#: src/modules/SquidACL.rb:137 msgid "Destination Domain" msgstr "대상 도메인" -#: src/modules/SquidACL.rb:148 -msgid "" -"This refers to the destination domain, i.e. the source domain where the " -"origin server is located." +#: src/modules/SquidACL.rb:148 +msgid "This refers to the destination domain, i.e. the source domain where the origin server is located." msgstr "대상 도메인, 즉 원본 서버가 있는 소스 도메인을 가리킵니다." -#: src/modules/SquidACL.rb:155 +#: src/modules/SquidACL.rb:155 msgid "Matches the client domain name." msgstr "클라이언트 도메인 이름과 일치합니다." -#: src/modules/SquidACL.rb:160 +#: src/modules/SquidACL.rb:160 msgid "Provides match for destination domain." msgstr "대상 도메인의 일치 항목을 제공합니다." -#: src/modules/SquidACL.rb:165 +#: src/modules/SquidACL.rb:165 msgid "time" msgstr "시간" -#: src/modules/SquidACL.rb:173 +#: src/modules/SquidACL.rb:173 msgid "Days" msgstr "일" -#: src/modules/SquidACL.rb:175 +#: src/modules/SquidACL.rb:175 msgid "Monday" msgstr "월요일" -#: src/modules/SquidACL.rb:176 +#: src/modules/SquidACL.rb:176 msgid "Tuesday" msgstr "화요일" -#: src/modules/SquidACL.rb:177 +#: src/modules/SquidACL.rb:177 msgid "Wednesday" msgstr "수요일" -#: src/modules/SquidACL.rb:178 +#: src/modules/SquidACL.rb:178 msgid "Thursday" msgstr "목요일" -#: src/modules/SquidACL.rb:179 +#: src/modules/SquidACL.rb:179 msgid "Friday" msgstr "금요일" -#: src/modules/SquidACL.rb:180 +#: src/modules/SquidACL.rb:180 msgid "Saturday" msgstr "토요일" -#: src/modules/SquidACL.rb:181 +#: src/modules/SquidACL.rb:181 msgid "Sunday" msgstr "일요일" -#: src/modules/SquidACL.rb:192 +#: src/modules/SquidACL.rb:192 msgid "From (H:M)" msgstr "시작(H:M)" -#: src/modules/SquidACL.rb:195 +#: src/modules/SquidACL.rb:195 msgid "To (H:M)" msgstr "종료(H:M)" -#: src/modules/SquidACL.rb:208 +#: src/modules/SquidACL.rb:208 msgid "Matches using a regular expression on the complete URL." msgstr "전체 URL에 정규식을 사용하여 비교합니다." -#: src/modules/SquidACL.rb:213 -msgid "" -"Matches the URL path minus any protocol, port, and host name information" +#: src/modules/SquidACL.rb:213 +msgid "Matches the URL path minus any protocol, port, and host name information" msgstr "URL 경로에서 프로토콜, 포트 및 호스트 이름 정보를 뺀 값과 일치합니다." -#: src/modules/SquidACL.rb:220 +#: src/modules/SquidACL.rb:220 msgid "port" msgstr "포트" -#: src/modules/SquidACL.rb:221 +#: src/modules/SquidACL.rb:221 msgid "Port Number or Range of Ports" msgstr "포트 번호 또는 포트 범위" -#: src/modules/SquidACL.rb:226 +#: src/modules/SquidACL.rb:226 msgid "Matches the destination port for the request." msgstr "요청의 대상 포트와 일치합니다." -#: src/modules/SquidACL.rb:231 +#: src/modules/SquidACL.rb:231 msgid "myport" msgstr "myport" -#: src/modules/SquidACL.rb:232 +#: src/modules/SquidACL.rb:232 msgid "Port Number" msgstr "포트 번호" -#: src/modules/SquidACL.rb:237 +#: src/modules/SquidACL.rb:237 msgid "Provides match for local TCP port number." msgstr "로컬 TCP 포트 번호의 일치 항목을 제공합니다." -#: src/modules/SquidACL.rb:242 +#: src/modules/SquidACL.rb:242 msgid "proto" msgstr "proto" -#: src/modules/SquidACL.rb:243 +#: src/modules/SquidACL.rb:243 msgid "Protocol" msgstr "프로토콜" -#: src/modules/SquidACL.rb:248 +#: src/modules/SquidACL.rb:248 msgid "Matches the protocol of the request." msgstr "요청의 프로토콜과 일치합니다." -#: src/modules/SquidACL.rb:253 +#: src/modules/SquidACL.rb:253 msgid "method" msgstr "메소드 " -#: src/modules/SquidACL.rb:256 +#: src/modules/SquidACL.rb:256 msgid "HTTP Method" msgstr "HTTP 메소드" -#: src/modules/SquidACL.rb:271 +#: src/modules/SquidACL.rb:271 msgid "This type matches the HTTP method in the request headers." msgstr "이 유형은 요청 헤더의 HTTP 메소드와 비교합니다." -#: src/modules/SquidACL.rb:278 -msgid "" -"A regular expression that matches the client's browser type based on the " -"user agent header." -msgstr "" -"사용자 에이전트 헤더를 기준으로 클라이언트의 브라우저 유형과 일치하는 정규식" -"입니다." +#: src/modules/SquidACL.rb:278 +msgid "A regular expression that matches the client's browser type based on the user agent header." +msgstr "사용자 에이전트 헤더를 기준으로 클라이언트의 브라우저 유형과 일치하는 정규식입니다." -#: src/modules/SquidACL.rb:288 +#: src/modules/SquidACL.rb:288 msgid "Maximum Number of HTTP Connections" msgstr "최대 HTTP 연결 수" -#: src/modules/SquidACL.rb:300 -msgid "" -"Matches when the client's IP address has more than the specified number of " -"HTTP connections established." -msgstr "" -"클라이언트의 IP 주소가 지정된 HTTP 연결 수보다 많은 연결을 설정했을 때 비교합" -"니다." +#: src/modules/SquidACL.rb:300 +msgid "Matches when the client's IP address has more than the specified number of HTTP connections established." +msgstr "클라이언트의 IP 주소가 지정된 HTTP 연결 수보다 많은 연결을 설정했을 때 비교합니다." -#: src/modules/SquidACL.rb:307 +#: src/modules/SquidACL.rb:307 msgid "Matches Referer header." msgstr "새로 고침 헤더와 일치합니다." -#: src/modules/SquidACL.rb:314 src/modules/SquidACL.rb:337 +#: src/modules/SquidACL.rb:314 src/modules/SquidACL.rb:337 msgid "Header Name" msgstr "헤더 이름" -#: src/modules/SquidACL.rb:315 src/modules/SquidACL.rb:338 +#: src/modules/SquidACL.rb:315 src/modules/SquidACL.rb:338 msgid "Regular Expression(s)" msgstr "정규식" -#: src/modules/SquidACL.rb:328 +#: src/modules/SquidACL.rb:328 msgid "Regular expression matching any of the known request headers." msgstr "알려진 요청 헤더와 일치하는 정규식입니다." -#: src/modules/SquidACL.rb:351 +#: src/modules/SquidACL.rb:351 msgid "" -"Regular expression matching the mime type of the reply received by squid. " -"Can\n" +"Regular expression matching the mime type of the reply received by squid. Can\n" "be used to detect file download or some types of HTTP tunnelling requests.\n" msgstr "" "squid에 수신되는 응답의 MIME 형식과 일치하는 정규식입니다.\n" -"파일 다운로드나 일부 유형의 HTTP 터널링 요청을 검색하는 데 사용할 수 있습니" -"다.\n" +"파일 다운로드나 일부 유형의 HTTP 터널링 요청을 검색하는 데 사용할 수 있습니다.\n" -#: src/modules/SquidACL.rb:358 +#: src/modules/SquidACL.rb:358 msgid "Match the mime type of the request generated by the client." msgstr "클라이언트에서 생성된 요청의 MIME 형식과 일치합니다." -#: src/modules/SquidACL.rb:363 +#: src/modules/SquidACL.rb:363 msgid "Match the mime type of the reply received by Squid." msgstr "squid에 수신되는 응답의 MIME 형식과 일치합니다." -#: src/modules/SquidACL.rb:369 +#: src/modules/SquidACL.rb:369 msgid "MAC Address" msgstr "MAC 주소" -#: src/modules/SquidACL.rb:374 +#: src/modules/SquidACL.rb:374 msgid "Ethernet (MAC) address matching." msgstr "일치하는 이더넷(MAC) 주소입니다." -#. TRANSLATORS: language name - combo box entry -#: src/modules/SquidErrorMessages.rb:53 +#. TRANSLATORS: language name - combo box entry +#: src/modules/SquidErrorMessages.rb:53 msgid "Afrikaans" msgstr "아프리칸스어" -#: src/modules/SquidErrorMessages.rb:54 +#: src/modules/SquidErrorMessages.rb:54 msgid "Arabic" msgstr "아랍어" -#: src/modules/SquidErrorMessages.rb:55 +#: src/modules/SquidErrorMessages.rb:55 msgid "Armenian" msgstr "아르메니아어" -#: src/modules/SquidErrorMessages.rb:56 +#: src/modules/SquidErrorMessages.rb:56 msgid "Azerbaijani" msgstr "아제르바이잔어" -#: src/modules/SquidErrorMessages.rb:57 +#: src/modules/SquidErrorMessages.rb:57 msgid "Bulgarian" msgstr "불가리아어" -#: src/modules/SquidErrorMessages.rb:58 +#: src/modules/SquidErrorMessages.rb:58 msgid "Catalan" msgstr "카탈로니아어" -#: src/modules/SquidErrorMessages.rb:59 +#: src/modules/SquidErrorMessages.rb:59 msgid "Czech" msgstr "체코어" -#: src/modules/SquidErrorMessages.rb:60 +#: src/modules/SquidErrorMessages.rb:60 msgid "Danish" msgstr "덴마크어" -#: src/modules/SquidErrorMessages.rb:61 +#: src/modules/SquidErrorMessages.rb:61 msgid "German" msgstr "독일어" -#: src/modules/SquidErrorMessages.rb:62 +#: src/modules/SquidErrorMessages.rb:62 msgid "Greek" msgstr "그리스어" -#: src/modules/SquidErrorMessages.rb:63 +#: src/modules/SquidErrorMessages.rb:63 msgid "English" msgstr "영어" -#: src/modules/SquidErrorMessages.rb:64 +#: src/modules/SquidErrorMessages.rb:64 msgid "Spanish" msgstr "스페인어" -#: src/modules/SquidErrorMessages.rb:65 +#: src/modules/SquidErrorMessages.rb:65 msgid "Estonian" msgstr "에스토니아어" -#: src/modules/SquidErrorMessages.rb:66 +#: src/modules/SquidErrorMessages.rb:66 msgid "Persian" msgstr "페르시아어" -#: src/modules/SquidErrorMessages.rb:67 +#: src/modules/SquidErrorMessages.rb:67 msgid "Finnish" msgstr "핀란드어" -#: src/modules/SquidErrorMessages.rb:68 +#: src/modules/SquidErrorMessages.rb:68 msgid "French" msgstr "프랑스어" -#: src/modules/SquidErrorMessages.rb:69 +#: src/modules/SquidErrorMessages.rb:69 msgid "Hebrew" msgstr "히브리어" -#: src/modules/SquidErrorMessages.rb:70 +#: src/modules/SquidErrorMessages.rb:70 msgid "Hungarian" msgstr "헝가리어" -#: src/modules/SquidErrorMessages.rb:71 +#: src/modules/SquidErrorMessages.rb:71 msgid "Indonesian" msgstr "인도네시아어" -#: src/modules/SquidErrorMessages.rb:72 +#: src/modules/SquidErrorMessages.rb:72 msgid "Italian" msgstr "이탈리아어" -#: src/modules/SquidErrorMessages.rb:73 +#: src/modules/SquidErrorMessages.rb:73 msgid "Japanese" msgstr "일본어" -#: src/modules/SquidErrorMessages.rb:74 +#: src/modules/SquidErrorMessages.rb:74 msgid "Korean" msgstr "한국어" -#: src/modules/SquidErrorMessages.rb:75 +#: src/modules/SquidErrorMessages.rb:75 msgid "Latvian" msgstr "라트비아어" -#: src/modules/SquidErrorMessages.rb:76 +#: src/modules/SquidErrorMessages.rb:76 msgid "Lithuanian" msgstr "리투아니아어" -#: src/modules/SquidErrorMessages.rb:77 +#: src/modules/SquidErrorMessages.rb:77 msgid "Malay" msgstr "말레이어" -#: src/modules/SquidErrorMessages.rb:78 +#: src/modules/SquidErrorMessages.rb:78 msgid "Dutch" msgstr "네덜란드어" -#: src/modules/SquidErrorMessages.rb:79 +#: src/modules/SquidErrorMessages.rb:79 msgid "Occitan" msgstr "옥시트어" -#: src/modules/SquidErrorMessages.rb:80 +#: src/modules/SquidErrorMessages.rb:80 msgid "Polish" msgstr "폴란드어" -#: src/modules/SquidErrorMessages.rb:81 +#: src/modules/SquidErrorMessages.rb:81 msgid "Portuguese" msgstr "포르투갈어" -#: src/modules/SquidErrorMessages.rb:82 +#: src/modules/SquidErrorMessages.rb:82 msgid "Brazilian Portuguese" msgstr "포르투갈어(브라질)" -#: src/modules/SquidErrorMessages.rb:83 +#: src/modules/SquidErrorMessages.rb:83 msgid "Romanian" msgstr "루마니아어" -#: src/modules/SquidErrorMessages.rb:84 +#: src/modules/SquidErrorMessages.rb:84 msgid "Russian" msgstr "러시아어" -#: src/modules/SquidErrorMessages.rb:85 +#: src/modules/SquidErrorMessages.rb:85 msgid "Slovak" msgstr "슬로바키아어" -#: src/modules/SquidErrorMessages.rb:86 +#: src/modules/SquidErrorMessages.rb:86 msgid "Slovenian" msgstr "슬로베니아어" -#: src/modules/SquidErrorMessages.rb:87 +#: src/modules/SquidErrorMessages.rb:87 msgid "Serbian Cyrillic" msgstr "세르비아어(키릴 자모)" -#: src/modules/SquidErrorMessages.rb:88 +#: src/modules/SquidErrorMessages.rb:88 msgid "Serbian Latin" msgstr "세르비아어(라틴 문자)" -#: src/modules/SquidErrorMessages.rb:89 +#: src/modules/SquidErrorMessages.rb:89 msgid "Swedish" msgstr "스웨덴어" -#: src/modules/SquidErrorMessages.rb:90 +#: src/modules/SquidErrorMessages.rb:90 msgid "Thai" msgstr "태국어" -#: src/modules/SquidErrorMessages.rb:91 +#: src/modules/SquidErrorMessages.rb:91 msgid "Turkish" msgstr "터키어" -#: src/modules/SquidErrorMessages.rb:92 +#: src/modules/SquidErrorMessages.rb:92 msgid "Ukrainian" msgstr "우크라이나어" -#: src/modules/SquidErrorMessages.rb:93 +#: src/modules/SquidErrorMessages.rb:93 msgid "Uzbek" msgstr "우즈벡어" -#: src/modules/SquidErrorMessages.rb:94 +#: src/modules/SquidErrorMessages.rb:94 msgid "Vietnamese" msgstr "베트남어" -#: src/modules/SquidErrorMessages.rb:95 +#: src/modules/SquidErrorMessages.rb:95 msgid "Simplified Chinese" msgstr "중국어 간체" -#: src/modules/SquidErrorMessages.rb:96 +#: src/modules/SquidErrorMessages.rb:96 msgid "Traditional Chinese" msgstr "중국어 번체" Modified: branches/SLE12-SP3/yast/ko/po/sshd.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/sshd.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/sshd.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,250 +14,250 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. SSHD read dialog caption -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:155 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:175 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:78 +#. SSHD read dialog caption +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:155 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:175 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:78 msgid "Initializing SSHD Configuration" msgstr "SSHD 구성 초기화" -#. Progress stage 1/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:161 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:181 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:84 +#. Progress stage 1/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:161 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:181 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:84 msgid "Read current SSHD configuration" msgstr "현재 SSHD 구성 읽기" -#. Progress stage 2/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:163 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:183 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:86 +#. Progress stage 2/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:163 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:183 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:86 msgid "Read current SSHD state" msgstr "현재 SSHD 상태 읽기" -#. Progress step 1/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:166 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:186 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:89 +#. Progress step 1/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:166 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:186 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:89 msgid "Reading current SSHD configuration..." msgstr "현재 SSHD 구성을 읽는 중입니다." -#. Progress step 2/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:168 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:188 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:91 +#. Progress step 2/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:168 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:188 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:91 msgid "Reading current SSHD state..." msgstr "현재 SSHD 상태를 읽는 중입니다." -#. Error message -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:186 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:206 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:109 +#. Error message +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:186 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:206 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:109 msgid "Cannot read current SSHD state." msgstr "현재 SSHD 상태를 읽을 수 없습니다." -#. SSHD read dialog caption -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:204 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:224 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:127 +#. SSHD read dialog caption +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:204 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:224 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:127 msgid "Saving SSHD Configuration" msgstr "SSHD 구성 저장" -#. Progress stage 1/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:210 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:230 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:133 +#. Progress stage 1/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:210 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:230 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:133 msgid "Write the SSHD settings" msgstr "SSHD 설정 쓰기" -#. Progress stage 2/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:212 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:232 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:135 +#. Progress stage 2/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:212 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:232 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:135 msgid "Adjust the SSHD service" msgstr "SSHD 서비스 조정" -#. Progress step 1/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:215 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:235 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:138 +#. Progress step 1/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:215 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:235 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:138 msgid "Writing the SSHD settings..." msgstr "SSHD 설정을 쓰는 중..." -#. Progress step 2/2 -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:217 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:237 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:140 +#. Progress step 2/2 +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:217 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:237 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:140 msgid "Adjusting the SSHD service..." msgstr "SSHD 서비스 조정 중..." -#. Error message -#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:228 -#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:248 -#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:151 +#. Error message +#: tutorials/tutorial-includes/sshd/t1-continue1-Sshd.ycp:228 +#: tutorials/tutorial-includes/sshd/t1-final-Sshd.ycp:248 +#: tutorials/tutorial-sources/clean-ycp/Sshd.ycp:151 msgid "Cannot write SSHD settings." msgstr "SSHD 설정을 쓸 수 없습니다." -#. A popup dialog caption -#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:116 +#. A popup dialog caption +#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:116 msgid "Add New Port" msgstr "새 포트 추가" -#. A popup dialog caption -#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:119 +#. A popup dialog caption +#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:119 msgid "Edit Current Port" msgstr "현재 포트 편집" -#. A text entry -#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:121 +#. A text entry +#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:121 msgid "&Port" msgstr "포트(&P)" -#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:144 +#: tutorials/tutorial-includes/sshd/t1-final-complex.ycp:144 msgid "Port number must not be empty." msgstr "포트 번호는 비워둘 수 없습니다." -#. a dialog caption -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:28 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:28 +#. a dialog caption +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:28 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:28 msgid "SSHD Server Configuration" msgstr "SSHD 서버 구성" -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:31 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:31 +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:31 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:31 msgid "SSHD TCP Ports" msgstr "SSHD TCP 포트" -#. a push button -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:40 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:40 +#. a push button +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:40 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:40 msgid "&Add..." msgstr "추가(&A)..." -#. a push button -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:42 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:42 +#. a push button +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:42 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:42 msgid "&Edit..." msgstr "편집(&E)..." -#. a push button -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:44 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:44 +#. a push button +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:44 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:44 msgid "&Delete" msgstr "삭제(&D)" -#. a dialog frame caption -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:49 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:49 +#. a dialog frame caption +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:49 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:49 msgid "Server Features" msgstr "서버 기능" -#. a check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:52 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:52 +#. a check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:52 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:52 msgid "Allow &TCP Forwarding" msgstr "TCP 전달 허용(&T)" -#. a check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:54 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:54 +#. a check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:54 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:54 msgid "Allow &X11 Forwarding" msgstr "X11 전달 허용(&X)" -#. a check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:56 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:56 +#. a check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:56 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:56 msgid "Allow &Compression" msgstr "압축 허용(&C)" -#. a dialog caption -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:106 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:100 +#. a dialog caption +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:106 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:100 msgid "SSHD Server Login Settings" msgstr "SSHD 서버 로그인 설정" -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:110 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:104 +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:110 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:104 msgid "General Login Settings" msgstr "일반 로그인 설정" -#. A check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:113 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:107 +#. A check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:113 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:107 msgid "Print &Message of the Day After Login" msgstr "로그인 후 날짜의 메시지 인쇄(&M)" -#. A check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:115 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:109 +#. A check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:115 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:109 msgid "Permi&t Root Login" msgstr "루트 로그인 허용(&T)" -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:120 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:114 +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:120 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:114 msgid "Authentication Settings" msgstr "인증 설정" -#. A text entry -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:123 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:117 +#. A text entry +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:123 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:117 msgid "Ma&ximum Authentication Tries" msgstr "최대 인증 시도 횟수(&X)" -#. A check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:125 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:119 +#. A check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:125 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:119 msgid "Pa&sswordAuthentication" msgstr "비밀번호 인증(&S)" -#. A check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:127 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:121 +#. A check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:127 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:121 msgid "RSA Authenti&cation" msgstr "RSA 인증(&C)" -#. A check box -#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:129 -#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:123 +#. A check box +#: tutorials/tutorial-includes/sshd/t1-final-dialogs.ycp:129 +#: tutorials/tutorial-sources/clean-ycp/dialogs.ycp:123 msgid "Public &Key Authentication" msgstr "공용 키 인증(&K)" -#. Sshd read dialog caption -#: tutorials/tutorial-includes/sshd/t1-start-Sshd.ycp:28 +#. Sshd read dialog caption +#: tutorials/tutorial-includes/sshd/t1-start-Sshd.ycp:28 msgid "Initializing sshd Configuration" msgstr "SSHD 구성 초기화" -#. Sshd write dialog caption -#: tutorials/tutorial-includes/sshd/t1-start-Sshd.ycp:53 +#. Sshd write dialog caption +#: tutorials/tutorial-includes/sshd/t1-start-Sshd.ycp:53 msgid "Saving sshd Configuration" msgstr "SSHD 구성 저장" -#. Sshd overview dialog caption -#: tutorials/tutorial-includes/sshd/t1-start-complex.ycp:56 +#. Sshd overview dialog caption +#: tutorials/tutorial-includes/sshd/t1-start-complex.ycp:56 msgid "Sshd Overview" msgstr "SSHD 개요" -#. Table header -#: tutorials/tutorial-includes/sshd/t1-start-complex.ycp:63 +#. Table header +#: tutorials/tutorial-includes/sshd/t1-start-complex.ycp:63 msgid "Number" msgstr "번호" -#: tutorials/tutorial-includes/sshd/t1-start-complex.ycp:63 +#: tutorials/tutorial-includes/sshd/t1-start-complex.ycp:63 msgid "Sshd" msgstr "SSHD" -#. Sshd configure1 dialog caption -#: tutorials/tutorial-includes/sshd/t1-start-dialogs.ycp:25 +#. Sshd configure1 dialog caption +#: tutorials/tutorial-includes/sshd/t1-start-dialogs.ycp:25 msgid "</command>Sshd Configuration<command>" msgstr "</command>SSHD 구성<command>" -#. Sshd configure1 dialog contents -#: tutorials/tutorial-includes/sshd/t1-start-dialogs.ycp:28 +#. Sshd configure1 dialog contents +#: tutorials/tutorial-includes/sshd/t1-start-dialogs.ycp:28 msgid "First part of configuration of sshd" msgstr "SSHD 구성의 첫 번째 부분" -#. Read dialog help -#: tutorials/tutorial-sources/clean-ycp/helps.ycp:18 +#. Read dialog help +#: tutorials/tutorial-sources/clean-ycp/helps.ycp:18 msgid "" "<p><b><big>Initializing sshd Configuration</big></b><br>\n" "Please wait...<br></p>" @@ -265,8 +265,8 @@ "<p><b><big>SSHD 구성 초기화</big></b><br>\n" "기다려 주십시오.<br></p>" -#. Write dialog help -#: tutorials/tutorial-sources/clean-ycp/helps.ycp:22 +#. Write dialog help +#: tutorials/tutorial-sources/clean-ycp/helps.ycp:22 msgid "" "<p><b><big>Saving sshd Configuration</big></b><br>\n" "Please wait...<br></p>" @@ -274,8 +274,8 @@ "<p><b><big>SSHD 구성 저장</big></b><br>\n" "기다려 주십시오.<br></p>" -#. Server Configuration dialog help -#: tutorials/tutorial-sources/clean-ycp/helps.ycp:26 +#. Server Configuration dialog help +#: tutorials/tutorial-sources/clean-ycp/helps.ycp:26 msgid "" "<p><b><big>Server Configuration</big></b><br>\n" "Configure SSHD here.<br></p>" @@ -283,8 +283,8 @@ "<p><b><big>서버 구성</big></b><br>\n" "여기서 SSHD를 구성합니다.<br></p>" -#. Login Settings dialog help -#: tutorials/tutorial-sources/clean-ycp/helps.ycp:30 +#. Login Settings dialog help +#: tutorials/tutorial-sources/clean-ycp/helps.ycp:30 msgid "" "<p><b><big>Login Settings</big></b><br>\n" "Configure SSHD login settings here.<br></p>" @@ -292,7 +292,7 @@ "<p><b><big>로그인 설정</big></b><br>\n" "여기서 SSHD 로그인 설정을 구성합니다.<br></p>" -#. Command line help text for the Xsshd module -#: tutorials/tutorial-sources/clean-ycp/sshd.ycp:32 +#. Command line help text for the Xsshd module +#: tutorials/tutorial-sources/clean-ycp/sshd.ycp:32 msgid "Configuration of sshd" msgstr "SSHD 구성" Modified: branches/SLE12-SP3/yast/ko/po/storage.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/storage.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/storage.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,8 +14,8 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. popup text -#: src/clients/disk.rb:50 +#. popup text +#: src/clients/disk.rb:50 msgid "" "Only use this program if you are familiar with partitioning hard disks.\n" "\n" @@ -26,8 +26,7 @@ "\n" "To continue despite this warning, click Yes.\n" msgstr "" -"하드 디스크 파티셔닝에 대해 잘 알고 있는 경우에만 이 프로그램을 사용하십시" -"오.\n" +"하드 디스크 파티셔닝에 대해 잘 알고 있는 경우에만 이 프로그램을 사용하십시오.\n" "\n" "정확히 모르는 경우에는\n" "사용 중인 디스크(마운트, 스왑 등)를 파티셔닝하지\n" @@ -36,60 +35,60 @@ "\n" "이 경고를 무시하고 계속하려면 예를 클릭하십시오.\n" -#. dialog heading -#. dialog caption -#: src/clients/disk.rb:67 src/include/partitioning/ep-main.rb:68 +#. dialog heading +#. dialog caption +#: src/clients/disk.rb:67 src/include/partitioning/ep-main.rb:68 msgid "Expert Partitioner" msgstr "고급 파티션 도구" -#. text show during initialization -#: src/clients/disk.rb:69 +#. text show during initialization +#: src/clients/disk.rb:69 msgid "Initializing..." msgstr "초기화 중..." -#. helptext -#: src/clients/disk.rb:71 +#. helptext +#: src/clients/disk.rb:71 msgid "<p>Volumes are being detected.</p>" msgstr "<p>볼륨을 탐지하는 중입니다.</p>" -#. Commandline help title -#: src/clients/disk_worker.rb:49 +#. Commandline help title +#: src/clients/disk_worker.rb:49 msgid "Storage Configuration" msgstr "저장소 구성" -#. Commandline command help -#: src/clients/disk_worker.rb:57 +#. Commandline command help +#: src/clients/disk_worker.rb:57 msgid "List disks and partitions" msgstr "디스크 및 파티션 나열" -#. Command line option help text -#: src/clients/disk_worker.rb:70 +#. Command line option help text +#: src/clients/disk_worker.rb:70 msgid "List disks" msgstr "디스크 나열" -#. Command line option help text -#: src/clients/disk_worker.rb:74 +#. Command line option help text +#: src/clients/disk_worker.rb:74 msgid "List partitions" msgstr "파티션 나열" -#. Title for dialogue -#: src/clients/inst_disk_proposal.rb:76 +#. Title for dialogue +#: src/clients/inst_disk_proposal.rb:76 msgid "Suggested Partitioning" msgstr "추천하는 파티션 구성" -#. Radiobutton for partition dialog -#: src/clients/inst_disk_proposal.rb:78 +#. Radiobutton for partition dialog +#: src/clients/inst_disk_proposal.rb:78 msgid "&Expert Partitioner..." msgstr "고급 파티션 도구(&E)..." -#. Radiobutton for partition dialog -#: src/clients/inst_disk_proposal.rb:80 +#. Radiobutton for partition dialog +#: src/clients/inst_disk_proposal.rb:80 msgid "&Create Partition Setup..." msgstr "파티션 설정 생성(&C)..." -#. popup text -#: src/clients/inst_disk_proposal.rb:123 -#: src/clients/partitions_proposal.rb:105 +#. popup text +#: src/clients/inst_disk_proposal.rb:123 +#: src/clients/partitions_proposal.rb:105 msgid "" "No automatic proposal possible.\n" "Specify mount points manually in the 'Partitioner' dialog." @@ -97,17 +96,17 @@ "자동 설정이 불가능 합니다.\n" "'파티션 관리자' 대화 상자에서 마운트 포인트를 수동으로 지정해 주세요." -#. TRANSLATORS: button text -#. this is the resize case -#. -#. this is the normal case -#: src/clients/inst_disk_proposal.rb:135 src/clients/inst_target_part.rb:164 -#: src/clients/inst_target_part.rb:178 src/clients/inst_target_part.rb:185 +#. TRANSLATORS: button text +#. this is the resize case +#. +#. this is the normal case +#: src/clients/inst_disk_proposal.rb:135 src/clients/inst_target_part.rb:164 +#: src/clients/inst_target_part.rb:178 src/clients/inst_target_part.rb:185 msgid "Edit Proposal Settings" msgstr "제안 설정 편집(&D)" -#. help on suggested partitioning -#: src/clients/inst_disk_proposal.rb:165 +#. help on suggested partitioning +#: src/clients/inst_disk_proposal.rb:165 msgid "" "<p>\n" "Your hard disks have been checked. The partition setup\n" @@ -117,9 +116,9 @@ "하드 디스크 검사를 완료했습니다. 표시된 파티션 설정이\n" " 하드 드라이브에 대해 제안되었습니다.</p>" -#. help text continued -#. %1 is replaced by button text -#: src/clients/inst_disk_proposal.rb:175 +#. help text continued +#. %1 is replaced by button text +#: src/clients/inst_disk_proposal.rb:175 msgid "" "<p>\n" "To make only small adjustments to the proposed\n" @@ -130,11 +129,10 @@ "<p>\n" "파일 시스템 형식 변경과 같이\n" "제안된 설정을 일부만 조정하려면\n" -"<b>%1</b>을(를) 선택하고 고급 파티션 관리자 대화 상자에서 설정을 수정하십시" -"오.</p>\n" +"<b>%1</b>을(를) 선택하고 고급 파티션 관리자 대화 상자에서 설정을 수정하십시오.</p>\n" -#. help text continued -#: src/clients/inst_disk_proposal.rb:188 +#. help text continued +#: src/clients/inst_disk_proposal.rb:188 msgid "" "<p>\n" "If the suggestion does not fit your needs, create\n" @@ -152,27 +150,27 @@ "또한 RAID 및 암호화와 같은\n" "고급 옵션을 선택할 수도 있습니다.</p>\n" -#. Attention! besides the testsuite, AutoYaST is using this to turn off -#. the proposal screen too. See inst_autosetup.ycp -#: src/clients/inst_disk_proposal.rb:232 +#. Attention! besides the testsuite, AutoYaST is using this to turn off +#. the proposal screen too. See inst_autosetup.ycp +#: src/clients/inst_disk_proposal.rb:232 msgid "Impossible to create the requested proposal." msgstr "요청한 제안을 만들 수 없습니다." -#. TRANSLATORS: popup error message -#: src/clients/inst_disk_proposal.rb:238 +#. TRANSLATORS: popup error message +#: src/clients/inst_disk_proposal.rb:238 msgid "Not enough space available to propose snapshots for root volume." msgstr "루트 볼륨에 대한 스냅샷을 제안할 수 있는 공간이 부족합니다." -#. TRANSLATORS: popup error message -#: src/clients/inst_disk_proposal.rb:244 src/clients/inst_target_part.rb:449 +#. TRANSLATORS: popup error message +#: src/clients/inst_disk_proposal.rb:244 src/clients/inst_target_part.rb:449 msgid "Not enough space available to propose separate /home." msgstr "개별 /home을 제안할 수 있는 공간이 부족합니다." -#: src/clients/inst_disk_proposal.rb:283 +#: src/clients/inst_disk_proposal.rb:283 msgid "Nothing assigned as root filesystem. Cannot continue." msgstr "루트 파일 시스템으로 할당된 항목이 없습니다. 계속 진행할 수 없습니다." -#: src/clients/inst_disk_proposal.rb:304 +#: src/clients/inst_disk_proposal.rb:304 msgid "" "Computing this proposal will overwrite manual changes \n" "done so far. Continue with computing proposal?" @@ -180,22 +178,22 @@ "제안을 계산하면 현재 수동 변경 사항을 덮어씁니다.\n" "계속 제안을 계산하시겠습니까?" -#. we need to open dialog and set up slideshow -#: src/clients/inst_prepdisk.rb:66 +#. we need to open dialog and set up slideshow +#: src/clients/inst_prepdisk.rb:66 msgid "Preparing disks..." msgstr "디스크 준비 중..." -#. set to "true" to test non-graphical version -#. Unit for parition resizing - currently Megabytes -#. set to "true" to test non-graphical version -#. Unit for parition resizing - currently Megabytes -#: src/clients/inst_resize_dialog.rb:272 src/clients/inst_resize_ui.rb:487 +#. set to "true" to test non-graphical version +#. Unit for parition resizing - currently Megabytes +#. set to "true" to test non-graphical version +#. Unit for parition resizing - currently Megabytes +#: src/clients/inst_resize_dialog.rb:272 src/clients/inst_resize_ui.rb:487 msgid "MB" msgstr "MB" -#. Labels for bar graph. "%1" will be replace with a numeric value. -#. Labels for bar graph. "%1" will be replace with a numeric value. -#: src/clients/inst_resize_dialog.rb:275 src/clients/inst_resize_ui.rb:490 +#. Labels for bar graph. "%1" will be replace with a numeric value. +#. Labels for bar graph. "%1" will be replace with a numeric value. +#: src/clients/inst_resize_dialog.rb:275 src/clients/inst_resize_ui.rb:490 msgid "" "Windows\n" "Used\n" @@ -205,9 +203,9 @@ "Windows\n" " %1 " -#. Labels for bar graph. "%1" will be replace with a numeric value. -#. Labels for bar graph. "%1" will be replace with a numeric value. -#: src/clients/inst_resize_dialog.rb:277 src/clients/inst_resize_ui.rb:492 +#. Labels for bar graph. "%1" will be replace with a numeric value. +#. Labels for bar graph. "%1" will be replace with a numeric value. +#: src/clients/inst_resize_dialog.rb:277 src/clients/inst_resize_ui.rb:492 msgid "" "Windows\n" "Free\n" @@ -217,9 +215,9 @@ "Windows\n" " %1 " -#. Labels for bar graph. "%1" will be replace with a numeric value. -#. Labels for bar graph. "%1" will be replace with a numeric value. -#: src/clients/inst_resize_dialog.rb:279 src/clients/inst_resize_ui.rb:494 +#. Labels for bar graph. "%1" will be replace with a numeric value. +#. Labels for bar graph. "%1" will be replace with a numeric value. +#: src/clients/inst_resize_dialog.rb:279 src/clients/inst_resize_ui.rb:494 msgid "" "Linux\n" "%1 " @@ -227,25 +225,25 @@ "Linux\n" "%1 " -#. Labels for input fields. "%1" will be replaced with the current unit (MB). -#. Labels for input fields. "%1" will be replaced with the current unit (MB). -#: src/clients/inst_resize_dialog.rb:282 src/clients/inst_resize_ui.rb:497 +#. Labels for input fields. "%1" will be replaced with the current unit (MB). +#. Labels for input fields. "%1" will be replaced with the current unit (MB). +#: src/clients/inst_resize_dialog.rb:282 src/clients/inst_resize_ui.rb:497 msgid "Windows Free (%1)" msgstr "사용 가능한 Windows(%1)" -#. Labels for input fields. "%1" will be replaced with the current unit (MB). -#. Labels for input fields. "%1" will be replaced with the current unit (MB). -#: src/clients/inst_resize_dialog.rb:284 src/clients/inst_resize_ui.rb:499 +#. Labels for input fields. "%1" will be replaced with the current unit (MB). +#. Labels for input fields. "%1" will be replaced with the current unit (MB). +#: src/clients/inst_resize_dialog.rb:284 src/clients/inst_resize_ui.rb:499 msgid "Linux (%1)" msgstr "Linux (%1)" -#. Help text for Windows partition resizing - -#. common part for both graphical mode (with bar graphs) -#. and non-graphical mode (text only). -#. Help text for Windows partition resizing - -#. common part for both graphical mode (with bar graphs) -#. and non-graphical mode (text only). -#: src/clients/inst_resize_dialog.rb:293 src/clients/inst_resize_ui.rb:508 +#. Help text for Windows partition resizing - +#. common part for both graphical mode (with bar graphs) +#. and non-graphical mode (text only). +#. Help text for Windows partition resizing - +#. common part for both graphical mode (with bar graphs) +#. and non-graphical mode (text only). +#: src/clients/inst_resize_dialog.rb:293 src/clients/inst_resize_ui.rb:508 msgid "" "<p>\n" "Choose the new size for your Windows partition.\n" @@ -255,9 +253,9 @@ "윈도우즈 파티션의 새로운 크기를 선택하십시오.\n" "</p>" -#. help text (common to both modes), continued -#. help text (common to both modes), continued -#: src/clients/inst_resize_dialog.rb:302 src/clients/inst_resize_ui.rb:517 +#. help text (common to both modes), continued +#. help text (common to both modes), continued +#: src/clients/inst_resize_dialog.rb:302 src/clients/inst_resize_ui.rb:517 msgid "" "\n" "<p>\n" @@ -268,14 +266,13 @@ msgstr "" "\n" "<p>\n" -"마지막 설치 대화 상자에서 모든 설정을 확인해야만 실제 크기 변경 작업이 수행됩" -"니다.\n" +"마지막 설치 대화 상자에서 모든 설정을 확인해야만 실제 크기 변경 작업이 수행됩니다.\n" "그 전까지 Windows 파티션은 변경되지 않은 상태로 남아 있습니다.\n" "</p>\n" -#. help text (common to both modes), continued -#. help text (common to both modes), continued -#: src/clients/inst_resize_dialog.rb:315 src/clients/inst_resize_ui.rb:530 +#. help text (common to both modes), continued +#. help text (common to both modes), continued +#: src/clients/inst_resize_dialog.rb:315 src/clients/inst_resize_ui.rb:530 msgid "" "\n" "<p>\n" @@ -289,23 +286,23 @@ "<b>뒤로</b>를 누르십시오.\n" "</p>\n" -#. Headline above bar graph that displays current windows partition size -#. Headline above bar graph that displays current windows partition size -#: src/clients/inst_resize_dialog.rb:330 src/clients/inst_resize_ui.rb:545 +#. Headline above bar graph that displays current windows partition size +#. Headline above bar graph that displays current windows partition size +#: src/clients/inst_resize_dialog.rb:330 src/clients/inst_resize_ui.rb:545 msgid "Now" msgstr "현재" -#. Headline above bar graph that displays future windows and linux partitions -#. Headline above bar graph that displays future windows and linux partitions -#: src/clients/inst_resize_dialog.rb:337 src/clients/inst_resize_ui.rb:552 +#. Headline above bar graph that displays future windows and linux partitions +#. Headline above bar graph that displays future windows and linux partitions +#: src/clients/inst_resize_dialog.rb:337 src/clients/inst_resize_ui.rb:552 msgid "After Installation" msgstr "설치 후" -#. help text, continued - graphical mode only -#. this help text will be appended to the help text common to both modes. -#. help text, continued - graphical mode only -#. this help text will be appended to the help text common to both modes. -#: src/clients/inst_resize_dialog.rb:359 src/clients/inst_resize_ui.rb:574 +#. help text, continued - graphical mode only +#. this help text will be appended to the help text common to both modes. +#. help text, continued - graphical mode only +#. this help text will be appended to the help text common to both modes. +#: src/clients/inst_resize_dialog.rb:359 src/clients/inst_resize_ui.rb:574 msgid "" "\n" "<p>\n" @@ -321,9 +318,9 @@ " 표시됩니다.\n" " </p>\n" -#. help text (graphical mode), continued -#. help text (graphical mode), continued -#: src/clients/inst_resize_dialog.rb:372 src/clients/inst_resize_ui.rb:587 +#. help text (graphical mode), continued +#. help text (graphical mode), continued +#: src/clients/inst_resize_dialog.rb:372 src/clients/inst_resize_ui.rb:587 msgid "" "\n" "<p>\n" @@ -337,9 +334,9 @@ "입력하여 제안된 값을 조정하십시오.\n" "</p>\n" -#. help text (graphical mode), continued -#. help text (graphical mode), continued -#: src/clients/inst_resize_dialog.rb:384 src/clients/inst_resize_ui.rb:599 +#. help text (graphical mode), continued +#. help text (graphical mode), continued +#: src/clients/inst_resize_dialog.rb:384 src/clients/inst_resize_ui.rb:599 msgid "" "\n" "<p>\n" @@ -349,33 +346,32 @@ msgstr "" "\n" "<p>\n" -"Linux를 사용하기 위해 예약해놓은 공간에서 필요하다면 자동적으로 파티션을 생성" -"합니다.\n" +"Linux를 사용하기 위해 예약해놓은 공간에서 필요하다면 자동적으로 파티션을 생성합니다.\n" "</p>" -#. Label for used part of the Windows partition in non-graphical mode -#. Label for used part of the Windows partition in non-graphical mode -#: src/clients/inst_resize_dialog.rb:397 src/clients/inst_resize_ui.rb:612 +#. Label for used part of the Windows partition in non-graphical mode +#. Label for used part of the Windows partition in non-graphical mode +#: src/clients/inst_resize_dialog.rb:397 src/clients/inst_resize_ui.rb:612 msgid "Windows Used" msgstr "사용한 Windows" -#. Label for free part of the Windows partition in non-graphical mode -#. Label for free part of the Windows partition in non-graphical mode -#: src/clients/inst_resize_dialog.rb:407 src/clients/inst_resize_ui.rb:622 +#. Label for free part of the Windows partition in non-graphical mode +#. Label for free part of the Windows partition in non-graphical mode +#: src/clients/inst_resize_dialog.rb:407 src/clients/inst_resize_ui.rb:622 msgid "Free" msgstr "무료" -#. Edit field label for linux partition size in non-graphical mode -#. Edit field label for linux partition size in non-graphical mode -#: src/clients/inst_resize_dialog.rb:417 src/clients/inst_resize_ui.rb:632 +#. Edit field label for linux partition size in non-graphical mode +#. Edit field label for linux partition size in non-graphical mode +#: src/clients/inst_resize_dialog.rb:417 src/clients/inst_resize_ui.rb:632 msgid "Linux" msgstr "Linux" -#. help text, continued - non-graphical mode only -#. this help text will be appended to the help text common to both modes. -#. help text, continued - non-graphical mode only -#. this help text will be appended to the help text common to both modes. -#: src/clients/inst_resize_dialog.rb:437 src/clients/inst_resize_ui.rb:652 +#. help text, continued - non-graphical mode only +#. this help text will be appended to the help text common to both modes. +#. help text, continued - non-graphical mode only +#. this help text will be appended to the help text common to both modes. +#: src/clients/inst_resize_dialog.rb:437 src/clients/inst_resize_ui.rb:652 msgid "" "\n" "<p>Enter a value for the size of your <b>Linux</b> installation.\n" @@ -389,9 +385,9 @@ "파티션이 자동으로 생성됩니다.\n" "</p>\n" -#. help text (non-graphical mode), continued -#. help text (non-graphical mode), continued -#: src/clients/inst_resize_dialog.rb:449 src/clients/inst_resize_ui.rb:664 +#. help text (non-graphical mode), continued +#. help text (non-graphical mode), continued +#: src/clients/inst_resize_dialog.rb:449 src/clients/inst_resize_ui.rb:664 msgid "" "\n" "<p>\n" @@ -403,9 +399,9 @@ "<b>사용한 Windows</b>는 Windows 파티션에 사용된 공간 크기입니다.\n" "</p>\n" -#. help text (non-graphical mode), continued -#. help text (non-graphical mode), continued -#: src/clients/inst_resize_dialog.rb:460 src/clients/inst_resize_ui.rb:675 +#. help text (non-graphical mode), continued +#. help text (non-graphical mode), continued +#: src/clients/inst_resize_dialog.rb:460 src/clients/inst_resize_ui.rb:675 msgid "" "\n" "<p><b>Free</b> indicates the current free space (before the Linux\n" @@ -416,13 +412,13 @@ "<p><b>빈공간</b>은 파티션의 현재 빈공간(Linux 설치 전)을 나타냅니다.\n" "</p>" -#: src/clients/inst_resize_dialog.rb:472 src/clients/inst_resize_ui.rb:686 +#: src/clients/inst_resize_dialog.rb:472 src/clients/inst_resize_ui.rb:686 msgid "Resizing the Windows Partition" msgstr "Windows 파티션 크기 조정 중" -#. The Windows partition has not enough free space for Linux. Tell the user the needed amount -#. of free space and that he should terminate the installation now. -#: src/clients/inst_resize_ui.rb:390 +#. The Windows partition has not enough free space for Linux. Tell the user the needed amount +#. of free space and that he should terminate the installation now. +#: src/clients/inst_resize_ui.rb:390 msgid "" "An error has occurred.\n" "\n" @@ -448,9 +444,9 @@ "Windows 장치에 최소 %1MB의 여유 공간이\n" "필요합니다.\n" -#. not yet checked -#. Inform the user that his Windows partition is being checked. -#: src/clients/inst_resize_ui.rb:425 +#. not yet checked +#. Inform the user that his Windows partition is being checked. +#: src/clients/inst_resize_ui.rb:425 msgid "" "Checking the file system of your Windows partition\n" "for consistency.\n" @@ -466,8 +462,8 @@ " 양에 따라 시간이 다소 소요될 수 있습니다.\n" " \n" -#. The file system on the device is faulty. Tell the user he should correct those errors. -#: src/clients/inst_resize_ui.rb:452 +#. The file system on the device is faulty. Tell the user he should correct those errors. +#: src/clients/inst_resize_ui.rb:452 msgid "" "An error has occurred.\n" "\n" @@ -489,14 +485,14 @@ " 다음 번에 다시 문제가 발생할 경우 다른 방법으로\n" " Windows 파티션의 크기를 조정하십시오.\n" -#. now let the automatic partitioner do its work -#: src/clients/inst_resize_ui.rb:774 +#. now let the automatic partitioner do its work +#: src/clients/inst_resize_ui.rb:774 msgid "The available space is not sufficient for an installation." msgstr "사용가능한 공간이 설치하기에 충분하지 않습니다." -#. An internal error has occured. Tell the user that the installation should -#. be terminated now and that his hard disk has not been altered yet. -#: src/clients/inst_resize_ui.rb:889 +#. An internal error has occured. Tell the user that the installation should +#. be terminated now and that his hard disk has not been altered yet. +#: src/clients/inst_resize_ui.rb:889 msgid "" "An internal error has occurred.\n" "\n" @@ -516,15 +512,15 @@ " \t Windows 파티션을 축소하십시오.\n" " \t " -#. popup text -#: src/clients/inst_target_part.rb:96 +#. popup text +#: src/clients/inst_target_part.rb:96 msgid "Your system can only be configured with the custom partitioning option." msgstr "사용자 정의 파티셔닝 옵션을 사용해야만 시스템을 구성할 수 있습니다." -#. Win NT / 2000 -#. The Windows version is Windows NT or Windows 2000. Tell the user that this is currently -#. not supported and that he can go back in the installation or abort it. -#: src/clients/inst_target_part.rb:268 +#. Win NT / 2000 +#. The Windows version is Windows NT or Windows 2000. Tell the user that this is currently +#. not supported and that he can go back in the installation or abort it. +#: src/clients/inst_target_part.rb:268 msgid "" "An error has occurred.\n" "\n" @@ -544,10 +540,10 @@ " 다른 디스크를 선택하거나, 설치를 중단하고\n" " 다른 방법으로 Windows 파티션을 축소하십시오.\n" -#. local error -#. The Windows version used could not be determined. Tell the user -#. he can go back in the installation or abort it. -#: src/clients/inst_target_part.rb:287 +#. local error +#. The Windows version used could not be determined. Tell the user +#. he can go back in the installation or abort it. +#: src/clients/inst_target_part.rb:287 msgid "" "The Windows version of your system could not be determined.\n" "\n" @@ -563,10 +559,10 @@ " 다른 디스크를 선택하거나, 설치를 중단하고\n" " 다른 방법으로 Windows 파티션을 축소하십시오.\n" -#. OK --> No NT or 2000 -#. Tell the user about the risks of resizing his windows. -#. Ask him if he really wants to do it -#: src/clients/inst_target_part.rb:308 +#. OK --> No NT or 2000 +#. Tell the user about the risks of resizing his windows. +#. Ask him if he really wants to do it +#: src/clients/inst_target_part.rb:308 msgid "" "You selected to shrink your Windows partition.\n" "In the next dialog, specify the amount of\n" @@ -594,14 +590,14 @@ " \n" " Windows 파티션을 축소하시겠습니까?\n" -#. button text -#: src/clients/inst_target_part.rb:329 +#. button text +#: src/clients/inst_target_part.rb:329 msgid "&Shrink Windows" msgstr "윈도우즈 줄이기(&S)" -#. Tell the user about the consequences of deleting his windows. -#. Ask him if he really wants to do it -#: src/clients/inst_target_part.rb:345 +#. Tell the user about the consequences of deleting his windows. +#. Ask him if he really wants to do it +#: src/clients/inst_target_part.rb:345 msgid "" "You selected to delete your Windows partition completely.\n" "\n" @@ -615,13 +611,13 @@ " \n" " Windows 파티션을 삭제하시겠습니까?\n" -#. button text -#: src/clients/inst_target_part.rb:356 +#. button text +#: src/clients/inst_target_part.rb:356 msgid "&Delete Windows" msgstr "윈도우 삭제(&D)" -#. trailing free partition after (deleted) windows partition -#: src/clients/inst_target_part.rb:423 +#. trailing free partition after (deleted) windows partition +#: src/clients/inst_target_part.rb:423 msgid "" "Too few partitions are marked for removal or \n" "the disk is too small. \n" @@ -633,41 +629,38 @@ "Linux를 설치하려면 제거할 파티션을 \n" "더 많이 선택하거나 더 큰 디스크를 선택하십시오." -#. loop over targetMap and build radio buttons for selection -#. dont use foreach here since we need a counter (as a shortcut) -#. anyway -#: src/clients/inst_target_selection.rb:115 +#. loop over targetMap and build radio buttons for selection +#. dont use foreach here since we need a counter (as a shortcut) +#. anyway +#: src/clients/inst_target_selection.rb:115 msgid "Available &Disks" msgstr "사용 가능한 디스크(&D)" -#. label text -#: src/clients/inst_target_selection.rb:149 +#. label text +#: src/clients/inst_target_selection.rb:149 msgid "&Custom Partitioning (for experts)" msgstr "사용자 정의 파티셔닝(전문가용)(&C)" -#. This dialog selects the target disk for the installation. -#. Below this label, all targets are listed that can be used as -#. installation target -#. heading text -#: src/clients/inst_target_selection.rb:161 +#. This dialog selects the target disk for the installation. +#. Below this label, all targets are listed that can be used as +#. installation target +#. heading text +#: src/clients/inst_target_selection.rb:161 msgid "Hard Disk" msgstr "하드디스크" -#. normally the target is located on hard disks. Here no hard disks -#. can be found. YaST2 cannot install. Update CD might have newer drivers. -#: src/clients/inst_target_selection.rb:172 -msgid "" -"No disks found. Try using the update CD, if available, for installation." -msgstr "" -"디스크를 찾을 수 없습니다. 사용 가능한 경우 설치용 업데이트 CD를 사용해보십시" -"오." +#. normally the target is located on hard disks. Here no hard disks +#. can be found. YaST2 cannot install. Update CD might have newer drivers. +#: src/clients/inst_target_selection.rb:172 +msgid "No disks found. Try using the update CD, if available, for installation." +msgstr "디스크를 찾을 수 없습니다. 사용 가능한 경우 설치용 업데이트 CD를 사용해보십시오." -#. There are several hard disks found. Linux is completely installed on -#. one hard disk - this selection is done here -#. "Preparing Hard Disk" is the description of the dialog what to -#. do while the following locale is the help description -#. help part 1 of 3 -#: src/clients/inst_target_selection.rb:184 +#. There are several hard disks found. Linux is completely installed on +#. one hard disk - this selection is done here +#. "Preparing Hard Disk" is the description of the dialog what to +#. do while the following locale is the help description +#. help part 1 of 3 +#: src/clients/inst_target_selection.rb:184 msgid "" "<p>\n" "All hard disks automatically detected on your system\n" @@ -679,8 +672,8 @@ "표시됩니다. &product;을(를) 설치할 하드 디스크를 선택하십시오.\n" "</p>\n" -#. help part 2 of 3 -#: src/clients/inst_target_selection.rb:193 +#. help part 2 of 3 +#: src/clients/inst_target_selection.rb:193 msgid "" "<p>\n" "You may select later which part of the disk is used for &product;.\n" @@ -690,8 +683,8 @@ "&product;에서 디스크의 어느 부분을 사용할지 나중에 선택할 수 있습니다.\n" "</p>\n" -#. help part 3 of 3 -#: src/clients/inst_target_selection.rb:202 +#. help part 3 of 3 +#: src/clients/inst_target_selection.rb:202 msgid "" "\n" "<p>\n" @@ -707,81 +700,81 @@ " 파티션을 할당하는 작업을 완벽하게 제어할 수 있습니다.\n" " </p>\n" -#. first step of hd prepare, select a single disk or "expert" partitioning -#. Information what to do, background information -#. Information what to do, background information -#: src/clients/inst_target_selection.rb:215 -#: src/include/partitioning/auto_part_ui.rb:244 -#: src/include/partitioning/auto_part_ui.rb:302 +#. first step of hd prepare, select a single disk or "expert" partitioning +#. Information what to do, background information +#. Information what to do, background information +#: src/clients/inst_target_selection.rb:215 +#: src/include/partitioning/auto_part_ui.rb:244 +#: src/include/partitioning/auto_part_ui.rb:302 msgid "Preparing Hard Disk" msgstr "하드 디스크 준비 중" -#. there is a selection from which one option must be -#. chosen - at the moment no option is chosen -#: src/clients/inst_target_selection.rb:271 +#. there is a selection from which one option must be +#. chosen - at the moment no option is chosen +#: src/clients/inst_target_selection.rb:271 msgid "Select one of the options to continue." msgstr "계속하기 위해 항목중 하나를 선택해 주세요." -#: src/clients/inst_target_selection.rb:297 +#: src/clients/inst_target_selection.rb:297 msgid "Disk %1 is in use by %2" msgstr "디스크 %1이(가) %2에서 사용 중입니다." -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: multipath-simple.ycp -#. Package: yast2-storage -#. Summary: Simplistic multipath activation module. -#. Authors: Arvin Schnell -#: src/clients/multipath-simple.rb:34 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: multipath-simple.ycp +#. Package: yast2-storage +#. Summary: Simplistic multipath activation module. +#. Authors: Arvin Schnell +#: src/clients/multipath-simple.rb:34 msgid "Activate multipath?" msgstr "다중 경로를 활성화하시겠습니까?" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. Module: proposal_partitions.ycp -#. -#. $Id$ -#. -#. Author: Klaus Kaempf -#. -#. Purpose: Proposal function dispatcher - partitions. -#. -#. See also file proposal-API.txt for details. -#: src/clients/partitions_proposal.rb:93 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. Module: proposal_partitions.ycp +#. +#. $Id$ +#. +#. Author: Klaus Kaempf +#. +#. Purpose: Proposal function dispatcher - partitions. +#. +#. See also file proposal-API.txt for details. +#: src/clients/partitions_proposal.rb:93 msgid "" "The /home partition will not be formatted. After installation,\n" "ensure that ownerships of home directories are set properly." @@ -789,25 +782,25 @@ "/home 파티션은 포맷되지 않습니다. 설치 후에 홈 디렉토리의\n" "소유권이 올바르게 설정되었는지 확인하십시오." -#. label text -#: src/clients/partitions_proposal.rb:218 +#. label text +#: src/clients/partitions_proposal.rb:218 msgid "Partitioning" msgstr "파티션 작업" -#. label text -#: src/clients/partitions_proposal.rb:220 +#. label text +#: src/clients/partitions_proposal.rb:220 msgid "&Partitioning" msgstr "파티션작업(&P)" -#. progress step title -#: src/clients/storage_finish.rb:69 +#. progress step title +#: src/clients/storage_finish.rb:69 msgid "Saving file system configuration..." msgstr "파일 시스템 구성 저장 중..." -#. There is a consistency check for the selection. Next is the message, that -#. is displayed. The reason is determined within this consistency check and -#. then the message is passed through this interface transparently -#: src/include/partitioning/auto_part_ui.rb:53 +#. There is a consistency check for the selection. Next is the message, that +#. is displayed. The reason is determined within this consistency check and +#. then the message is passed through this interface transparently +#: src/include/partitioning/auto_part_ui.rb:53 msgid "" "The current selection is invalid:\n" "%1" @@ -815,15 +808,15 @@ "잘못된 선택입니다:\n" "%1" -#. list of partition checkboxes: show partition as unassigned -#. e.g. "1: 2 GB, unassigned" -#: src/include/partitioning/auto_part_ui.rb:72 +#. list of partition checkboxes: show partition as unassigned +#. e.g. "1: 2 GB, unassigned" +#: src/include/partitioning/auto_part_ui.rb:72 msgid "&%1: %2, unassigned" msgstr "&%1: %2, 지정되지 않음" -#. and the "Use entire hard disk" button -#. - please avoid excessively long lines - rather, include a newline -#: src/include/partitioning/auto_part_ui.rb:104 +#. and the "Use entire hard disk" button +#. - please avoid excessively long lines - rather, include a newline +#: src/include/partitioning/auto_part_ui.rb:104 msgid "" "Disk Areas to Use\n" "to Install %1\n" @@ -831,16 +824,16 @@ "%1 설치에 사용할\n" "디스크 영역\n" -#. pushbutton to choose the entire disk, erasing all data on -#. the disk this is an easy way to select all partitions on -#. the target disk -#: src/include/partitioning/auto_part_ui.rb:118 +#. pushbutton to choose the entire disk, erasing all data on +#. the disk this is an easy way to select all partitions on +#. the target disk +#: src/include/partitioning/auto_part_ui.rb:118 msgid "Use &Entire Hard Disk" msgstr "전체 하드 디스크 사용(&E)" -#. There were no prior partitions on this disk. -#. No partitions to choose from will be displayed. -#: src/include/partitioning/auto_part_ui.rb:153 +#. There were no prior partitions on this disk. +#. No partitions to choose from will be displayed. +#: src/include/partitioning/auto_part_ui.rb:153 msgid "" "There are no partitions on this disk yet.\n" "The entire disk will be used for %1." @@ -848,8 +841,8 @@ "이 디스크에는 파티션이 아직 없습니다.\n" "디스크 전체를 %1용으로 사용합니다." -#. popup text -#: src/include/partitioning/auto_part_ui.rb:166 +#. popup text +#: src/include/partitioning/auto_part_ui.rb:166 msgid "" "This disk appears to be used by Windows.\n" "There is not enough space to install Linux." @@ -857,18 +850,18 @@ "이 디스크는 Windows를 사용했던 것 같습니다.\n" "Linux를 설치하기에 공간이 부족합니다." -#. Radio button for using an entire (Windows) partition for Linux -#: src/include/partitioning/auto_part_ui.rb:181 +#. Radio button for using an entire (Windows) partition for Linux +#: src/include/partitioning/auto_part_ui.rb:181 msgid "&Delete Windows Completely" msgstr "Windows 완전 삭제(&D)" -#. Radio button for resizing a (Windows) partition -#: src/include/partitioning/auto_part_ui.rb:189 +#. Radio button for resizing a (Windows) partition +#: src/include/partitioning/auto_part_ui.rb:189 msgid "&Shrink Windows Partition" msgstr "Windows 파티션 축소(&S)" -#. TRANSLATORS: helptext, part 1 of 4 -#: src/include/partitioning/auto_part_ui.rb:208 +#. TRANSLATORS: helptext, part 1 of 4 +#: src/include/partitioning/auto_part_ui.rb:208 msgid "" "<p>\n" "Select where on your hard disk to install &product;.\n" @@ -878,8 +871,8 @@ "&product;을(를) 설치할 하드 디스크 위치를 선택하십시오.\n" "</p>\n" -#. TRANSLATORS: helptext, part 2 of 4 -#: src/include/partitioning/auto_part_ui.rb:216 +#. TRANSLATORS: helptext, part 2 of 4 +#: src/include/partitioning/auto_part_ui.rb:216 msgid "" "<p>\n" "Use either the <b>entire hard disk</b> or one or more of the\n" @@ -891,8 +884,8 @@ "빈 영역을 사용합니다.\n" "</p>\n" -#. TRANSLATORS: helptext, part 3 of 4 -#: src/include/partitioning/auto_part_ui.rb:225 +#. TRANSLATORS: helptext, part 3 of 4 +#: src/include/partitioning/auto_part_ui.rb:225 msgid "" "<p>\n" "Notice: If you select a region that is not shown as <i>free</i>, you\n" @@ -905,8 +898,8 @@ "데이터를 잃어버릴 수도 있습니다. 다른 운영체제에 영향을 미칠수 있습니다.\n" "</p>" -#. TRANSLATORS: helptext, part 4 of 4 -#: src/include/partitioning/auto_part_ui.rb:235 +#. TRANSLATORS: helptext, part 4 of 4 +#: src/include/partitioning/auto_part_ui.rb:235 msgid "" "<p>\n" "<b><i>The marked regions will be deleted. All data there will be\n" @@ -918,16 +911,16 @@ "</i></b> 삭제된 데이터를 복구하는 방법은 없습니다.\n" "</p>\n" -#. Frame title for installation target hard disk / partition(s) -#. Frame title for installation target hard disk / partition(s) -#: src/include/partitioning/auto_part_ui.rb:249 -#: src/include/partitioning/auto_part_ui.rb:306 +#. Frame title for installation target hard disk / partition(s) +#. Frame title for installation target hard disk / partition(s) +#: src/include/partitioning/auto_part_ui.rb:249 +#: src/include/partitioning/auto_part_ui.rb:306 msgid "Installing on:" msgstr "설치중:" -#. helptext for semi-automatic partitioning -#. part 1 of 2 -#: src/include/partitioning/auto_part_ui.rb:280 +#. helptext for semi-automatic partitioning +#. part 1 of 2 +#: src/include/partitioning/auto_part_ui.rb:280 msgid "" "<p>\n" "The selected hard disk is probably used by Windows. There is not enough\n" @@ -938,12 +931,11 @@ "<p>\n" "선택한 하드 디스크를 Windows에서 사용 중인 것 같습니다. &product;을(를)\n" "설치할 공간이 충분하지 않습니다. <b>윈도우즈를 완전히 지우기</b>나\n" -"<b>윈도우즈 파티션을 줄이기</b>를 선택하여 사용 가능한 공간을 늘릴 수 있습니" -"다.\n" +"<b>윈도우즈 파티션을 줄이기</b>를 선택하여 사용 가능한 공간을 늘릴 수 있습니다.\n" "</p>" -#. helptext, part 2 of 2 -#: src/include/partitioning/auto_part_ui.rb:290 +#. helptext, part 2 of 2 +#: src/include/partitioning/auto_part_ui.rb:290 msgid "" "<p>\n" "If you delete Windows, all data on this partition will be <b>irreversibly\n" @@ -954,34 +946,33 @@ msgstr "" "<p>\n" "Windows를 지우면, 그 파티션의 모든 데이터는 <b>영구히\n" -"사라지게됩니다.</b> 윈도우즈 파티션 줄이기를 사용할 때, <b>반드시 백업</b>을 " -"하십시오.\n" +"사라지게됩니다.</b> 윈도우즈 파티션 줄이기를 사용할 때, <b>반드시 백업</b>을 하십시오.\n" "왜냐하면 데이터가 다시 조직화되어야 하기 때문입니다.\n" "몇몇 시스템에서는 실패할 수 있습니다.\n" "</p>\n" -#. Label text -#. TRANSLATORS: checkbox text -#: src/include/partitioning/auto_part_ui.rb:341 -#: src/modules/StorageProposal.rb:6272 +#. Label text +#. TRANSLATORS: checkbox text +#: src/include/partitioning/auto_part_ui.rb:341 +#: src/modules/StorageProposal.rb:6272 msgid "Propose Separate &Home Partition" msgstr "별도의 홈 파티션 제안(&H)" -#. Label text -#: src/include/partitioning/auto_part_ui.rb:357 +#. Label text +#: src/include/partitioning/auto_part_ui.rb:357 msgid "Create &LVM Based Proposal" msgstr "LVM 기반 계획안 만들기(&L)" -#: src/include/partitioning/auto_part_ui.rb:368 +#: src/include/partitioning/auto_part_ui.rb:368 msgid "Encrypt Volume Group" msgstr "볼륨 그룹 암호화 " -#: src/include/partitioning/auto_part_ui.rb:373 +#: src/include/partitioning/auto_part_ui.rb:373 msgid "Proposal type" msgstr "계획안 유형" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:244 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:244 msgid "" "You have not assigned a root partition for\n" "installation. This does not work. Assign the root mount point \"/\" to a\n" @@ -995,8 +986,8 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:257 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:257 msgid "" "You tried to mount a FAT partition to one of the following mount\n" "points: /, /usr, /home, /opt or /var. This will very likely cause problems.\n" @@ -1006,13 +997,12 @@ msgstr "" "다음 마운트 포인트 중 하나에 FAT 파티션을 마운트하려고 했습니다.\n" "//usr, /home, /opt or /var. 이로 인해 문제가 발생할 수 있습니다.\n" -"이러한 마운트 포인트에 Linux 파일 시스템(예: ext3 또는 ext4)을 사용하십시" -"오.\n" +"이러한 마운트 포인트에 Linux 파일 시스템(예: ext3 또는 ext4)을 사용하십시오.\n" "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:270 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:270 msgid "" "You tried to mount a FAT partition to the\n" "mount point /boot. This will very likely cause problems. Use a Linux file\n" @@ -1020,15 +1010,13 @@ "\n" "Really use this setup?\n" msgstr "" -"마운트 포인트 /boot에 FAT 파티션을 마운트하려고 했습니다. 이로 인해 문제가 발" -"생할 수 있습니다.\n" -"이러한 마운트 포인트에 Linux 파일 시스템(예: ext3 또는 ext4)을 사용하십시" -"오.\n" +"마운트 포인트 /boot에 FAT 파티션을 마운트하려고 했습니다. 이로 인해 문제가 발생할 수 있습니다.\n" +"이러한 마운트 포인트에 Linux 파일 시스템(예: ext3 또는 ext4)을 사용하십시오.\n" "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:284 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:284 msgid "" "You have mounted a partition with Btrfs to the\n" "mount point /boot. This will very likely cause problems. Use a Linux file\n" @@ -1038,14 +1026,13 @@ msgstr "" "마운트 포인트 /boot에 Btrfs가 포함된 파티션을\n" "마운트했습니다. 이로 인해 문제가 발생할 수 있습니다.\n" -"이러한 마운트 포인트에 Linux 파일 시스템(예: ext3 또는 ext4)을 사용하십시" -"오.\n" +"이러한 마운트 포인트에 Linux 파일 시스템(예: ext3 또는 ext4)을 사용하십시오.\n" "\n" "이 설정을 사용하시겠습니까?\n" -#. A PReP/CHRP partition is not supposed to be mounted. So if we find any -#. other /boot partition, we should warn the user. -#: src/include/partitioning/custom_part_check_generated.rb:298 +#. A PReP/CHRP partition is not supposed to be mounted. So if we find any +#. other /boot partition, we should warn the user. +#: src/include/partitioning/custom_part_check_generated.rb:298 msgid "" "Warning:\n" "Your system needs a boot partition, either with type 0x41 PReP/CHRP\n" @@ -1061,8 +1048,8 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text, %1 is a number -#: src/include/partitioning/custom_part_check_generated.rb:314 +#. popup text, %1 is a number +#: src/include/partitioning/custom_part_check_generated.rb:314 msgid "" "Warning:\n" "Your boot partition ends above cylinder %1.\n" @@ -1082,8 +1069,8 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text, %1 is a size -#: src/include/partitioning/custom_part_check_generated.rb:334 +#. popup text, %1 is a size +#: src/include/partitioning/custom_part_check_generated.rb:334 msgid "" "Warning:\n" "Your boot partition is smaller than %1.\n" @@ -1097,8 +1084,8 @@ "\n" "이 크기를 부팅 파티션으로 사용하시겠습니까?\n" -#. /////////////////////////// NO BOOT /////////////////////////// -#: src/include/partitioning/custom_part_check_generated.rb:351 +#. /////////////////////////// NO BOOT /////////////////////////// +#: src/include/partitioning/custom_part_check_generated.rb:351 msgid "" "Warning: There is no partition of type bios_grub present.\n" "Such a partition is recommended (required with Btrfs) when Grub2 is\n" @@ -1112,10 +1099,10 @@ "크기가 약 1MB여야 합니다.\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#. If the user chooses 'no' here, the system will not be able to -#. boot from the hard drive! -#: src/include/partitioning/custom_part_check_generated.rb:371 +#. popup text +#. If the user chooses 'no' here, the system will not be able to +#. boot from the hard drive! +#: src/include/partitioning/custom_part_check_generated.rb:371 msgid "" "Warning: There is no partition mounted as /boot.\n" "To boot from your hard disk, a small /boot partition\n" @@ -1133,8 +1120,8 @@ "\n" "/boot 파티션 없이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:391 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:391 msgid "" "Warning: According to your setup, you intend to\n" "boot your machine from the root partition (/), which, unfortunately,\n" @@ -1154,7 +1141,7 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#: src/include/partitioning/custom_part_check_generated.rb:417 +#: src/include/partitioning/custom_part_check_generated.rb:417 msgid "" "Warning: Some subvolumes of the root filesystem are shadowed by\n" "mount points of other filesystem. This could lead to problems.\n" @@ -1166,8 +1153,8 @@ "%s\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:435 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:435 msgid "" "Warning: With your current setup, your %1\n" "installation might not be directly bootable, because\n" @@ -1183,8 +1170,8 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:453 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:453 msgid "" "Warning: With your current setup, your %2 installation\n" "will encounter problems when booting, because you have no\n" @@ -1208,8 +1195,8 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:475 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:475 msgid "" "Warning: With your current setup, your %2 installation will\n" "encounter problems when booting, because you have no \n" @@ -1233,20 +1220,19 @@ "\n" "이 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:498 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:498 msgid "Really use this setup?" msgstr "이 설정을 사용하시겠습니까?" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:506 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:506 msgid "" "\n" "You have not assigned a swap partition. In most cases, we highly recommend \n" "to create and assign a swap partition.\n" "Swap partitions on your system are listed in the main window with the\n" -"type \"Linux Swap\". An assigned swap partition has the mount point \"swap" -"\".\n" +"type \"Linux Swap\". An assigned swap partition has the mount point \"swap\".\n" "You can assign more than one swap partition, if desired.\n" "\n" "Really use the setup without swap partition?\n" @@ -1255,14 +1241,13 @@ "스왑 파티션을 할당하지 않았습니다. 대부분의 경우 스왑 파티션을 \n" "생성하여 할당하는 것이 좋습니다.\n" "시스템의 스왑 파티션은 \"Linux Swap\" 형식의\n" -"주 창에 나열됩니다. 할당된 스왑 파티션에는 \"swap\" 마운트 포인트가 있습니" -"다.\n" +"주 창에 나열됩니다. 할당된 스왑 파티션에는 \"swap\" 마운트 포인트가 있습니다.\n" "원하는 경우 두 개 이상의 스왑 파티션을 할당할 수 있습니다.\n" "\n" "스왑 파티션 없는 설정을 사용하시겠습니까?\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:522 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:522 msgid "" "\n" "You chose to install onto an existing partition that will not be\n" @@ -1274,8 +1259,8 @@ "선택했습니다. 특히 다음과 같은 경우 YaST에서 설치가 실패할 수\n" "있습니다.\n" -#. continued popup text -#: src/include/partitioning/custom_part_check_generated.rb:529 +#. continued popup text +#: src/include/partitioning/custom_part_check_generated.rb:529 msgid "" "- if this is an existing ReiserFS partition\n" "- if this partition already contains a Linux distribution that will be\n" @@ -1286,20 +1271,19 @@ "- 이미 Linux 배포판이 설치된 파티션에 덮어쓰기하려 할 경우 \n" "- 파티션에 파일 시스템이 없을 경우\n" -#. continued popup text -#: src/include/partitioning/custom_part_check_generated.rb:536 +#. continued popup text +#: src/include/partitioning/custom_part_check_generated.rb:536 msgid "" "If in doubt, better go back and mark this partition for\n" -"formatting, especially if it is assigned to one of the standard mount " -"points\n" +"formatting, especially if it is assigned to one of the standard mount points\n" "like /, /boot, /opt or /var.\n" msgstr "" "의심스러우면, 특히 /, /boot, /opt, /var 등의\n" "표준 마운트 포인트 중 하나에 할당된 경우 돌아가서 이 파티션을\n" "포맷하도록 표시하십시오.\n" -#. continued popup text -#: src/include/partitioning/custom_part_check_generated.rb:542 +#. continued popup text +#: src/include/partitioning/custom_part_check_generated.rb:542 msgid "" "If you decide to format the partition, all data on it will be lost.\n" "\n" @@ -1309,8 +1293,8 @@ "\n" "파티션을 포맷하지 않은 상태로 유지하시겠습니까?\n" -#. popup text %1 is replaced by a raid name e.g. md0 -#: src/include/partitioning/custom_part_check_generated.rb:603 +#. popup text %1 is replaced by a raid name e.g. md0 +#: src/include/partitioning/custom_part_check_generated.rb:603 msgid "" "The selected device belongs to the RAID (%1).\n" "Remove it from the RAID before editing it.\n" @@ -1318,8 +1302,8 @@ "선택한 장치는 RAID(%1)에 속해 있습니다.\n" "편집하기 전에 먼저 RAID에서 장치를 제거하십시오.\n" -#. popup text %1 is replaced by a name e.g. system -#: src/include/partitioning/custom_part_check_generated.rb:614 +#. popup text %1 is replaced by a name e.g. system +#: src/include/partitioning/custom_part_check_generated.rb:614 msgid "" "The selected device belongs to a volume group (%1).\n" "Remove it from the volume group before editing it.\n" @@ -1327,8 +1311,8 @@ "선택한 장치는 볼륨 그룹(%1)에 속해 있습니다.\n" "편집하기 전에 먼저 볼륨 그룹에서 장치를 제거하십시오.\n" -#. popup text %1 is replaced by a name e.g. system -#: src/include/partitioning/custom_part_check_generated.rb:624 +#. popup text %1 is replaced by a name e.g. system +#: src/include/partitioning/custom_part_check_generated.rb:624 msgid "" "The selected device is used by volume (%1).\n" "Remove the volume before editing it.\n" @@ -1336,8 +1320,8 @@ "선택한 장치를 볼륨(%1)에서 사용하고 있습니다.\n" "편집하기 전에 먼저 볼륨을 제거하십시오.\n" -#. popup text %2 is a device name, %1 is the raid name -#: src/include/partitioning/custom_part_check_generated.rb:657 +#. popup text %2 is a device name, %1 is the raid name +#: src/include/partitioning/custom_part_check_generated.rb:657 msgid "" "The device (%2) belongs to the RAID (%1).\n" "Remove it from the RAID before deleting it.\n" @@ -1345,8 +1329,8 @@ "장치(%2)가 RAID(%1)에 속해 있습니다.\n" "삭제하기 전에 먼저 RAID에서 장치를 제거하십시오.\n" -#. popup text, %1 and %2 are device names -#: src/include/partitioning/custom_part_check_generated.rb:668 +#. popup text, %1 and %2 are device names +#: src/include/partitioning/custom_part_check_generated.rb:668 msgid "" "The device (%2) is used by %1.\n" "Remove %1 before deleting it.\n" @@ -1354,12 +1338,12 @@ "장치(%2)를 %1에서 사용하고 있습니다.\n" "삭제하기 전에 먼저 %1을(를) 제거하십시오.\n" -#: src/include/partitioning/custom_part_check_generated.rb:680 +#: src/include/partitioning/custom_part_check_generated.rb:680 msgid "It cannot be deleted while mounted." msgstr "마운트된 동안에는 삭제할 수 없습니다." -#. popup text, %1 is a device name -#: src/include/partitioning/custom_part_check_generated.rb:716 +#. popup text, %1 is a device name +#: src/include/partitioning/custom_part_check_generated.rb:716 msgid "" "The device (%1) cannot be removed since it is a logical partition and \n" "another logical partition with a higher number is in use.\n" @@ -1368,14 +1352,12 @@ "이 장치가 논리적 파티션이며 더 높은 번호를\n" " 가진 논리적 파티션이 사용 중이기 때문입니다.\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:792 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:792 msgid "" -"The selected extended partition contains partitions which are currently " -"mounted:\n" +"The selected extended partition contains partitions which are currently mounted:\n" "%1\n" -"We *strongly* recommend to unmount these partitions before you delete the " -"extended partition.\n" +"We *strongly* recommend to unmount these partitions before you delete the extended partition.\n" "Choose Cancel unless you know exactly what you are doing.\n" msgstr "" "선택한 확장 파티션에는 현재 마운트된 파티션이 포함되어 있습니다.\n" @@ -1383,8 +1365,8 @@ "확장 파티션을 삭제하기 전에 마운트 해제하는 것이 *좋습니다*.\n" "현재 수행 중인 작업에 대해 정확히 모를 경우 \"취소\"를 선택하십시오.\n" -#. popup text, Do not translate LVM. -#: src/include/partitioning/custom_part_check_generated.rb:810 +#. popup text, Do not translate LVM. +#: src/include/partitioning/custom_part_check_generated.rb:810 msgid "" "\n" "The selected extended partition contains at least one LVM partition\n" @@ -1396,8 +1378,8 @@ "선택된 파티션에 볼륨 그룹에 지정된 LVM 파티션이 적어도 하나 있습니다.\n" "확장 파티션을 삭제하기 전에 볼륨그룹에서 모든 파티션을 삭제하십시오\n" -#. popup text, Do not translate RAID. -#: src/include/partitioning/custom_part_check_generated.rb:821 +#. popup text, Do not translate RAID. +#: src/include/partitioning/custom_part_check_generated.rb:821 msgid "" "\n" "The selected extended partition contains at least one partition\n" @@ -1410,8 +1392,8 @@ "적어도 하나 있습니다.\n" "확장 파티션을 삭제하기 전에 RAID 시스템에서 파티션을 해제하십시오\n" -#. popup text -#: src/include/partitioning/custom_part_check_generated.rb:832 +#. popup text +#: src/include/partitioning/custom_part_check_generated.rb:832 msgid "" "\n" "The selected extended partition contains at least one partition\n" @@ -1423,31 +1405,31 @@ " 있습니다. 확장 파티션을 삭제하기 전에\n" " 먼저 사용된 볼륨을 제거하십시오.\n" -#. heading text -#: src/include/partitioning/custom_part_dialogs.rb:70 +#. heading text +#: src/include/partitioning/custom_part_dialogs.rb:70 msgid "Enter your Password for the Encrypted File System." msgstr "암호화된 파일 시스템의 비밀번호를 입력하십시오." -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:74 -#: src/include/partitioning/ep-dialogs.rb:806 -#: src/modules/StorageProposal.rb:6400 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:74 +#: src/include/partitioning/ep-dialogs.rb:806 +#: src/modules/StorageProposal.rb:6400 msgid "Do not forget what you enter here!" msgstr "여기에 입력한 비밀번호를 기억해 주세요!" -#: src/include/partitioning/custom_part_dialogs.rb:78 -#: src/include/partitioning/ep-dialogs.rb:809 +#: src/include/partitioning/custom_part_dialogs.rb:78 +#: src/include/partitioning/ep-dialogs.rb:809 msgid "Empty password allowed." msgstr "비어 있는 비밀번호가 허용됩니다." -#. heading text, %1 is replaced by device name (e.g. /dev/hda1) -#: src/include/partitioning/custom_part_dialogs.rb:84 +#. heading text, %1 is replaced by device name (e.g. /dev/hda1) +#: src/include/partitioning/custom_part_dialogs.rb:84 msgid "Password for Encrypted File System on %1" msgstr "%1에 대한 암호화된 파일 시스템의 비밀번호" -#. translator comment: %1 is the device name, %2 is a directory -#. example: "...password for device /dev/hda6 mounted on /var" -#: src/include/partitioning/custom_part_dialogs.rb:105 +#. translator comment: %1 is the device name, %2 is a directory +#. example: "...password for device /dev/hda6 mounted on /var" +#: src/include/partitioning/custom_part_dialogs.rb:105 msgid "" "Enter your encryption password for\n" "device %1 mounted on %2.\n" @@ -1455,38 +1437,38 @@ "%2에서 마운트된 %1 장치의\n" "암호화 비밀번호를 입력하십시오.\n" -#. heading text -#: src/include/partitioning/custom_part_dialogs.rb:121 +#. heading text +#: src/include/partitioning/custom_part_dialogs.rb:121 msgid "Enter your Password for the Encrypted File System" msgstr "암호화된 파일 시스템의 비밀번호를 입력하십시오." -#. Label: get password for user root -#. Please use newline if label is longer than 40 characters -#. Label: get password for user root -#. Please use newline if label is longer than 40 characters -#: src/include/partitioning/custom_part_dialogs.rb:136 -#: src/include/partitioning/ep-dialogs.rb:834 +#. Label: get password for user root +#. Please use newline if label is longer than 40 characters +#. Label: get password for user root +#. Please use newline if label is longer than 40 characters +#: src/include/partitioning/custom_part_dialogs.rb:136 +#: src/include/partitioning/ep-dialogs.rb:834 msgid "&Enter a Password for your File System:" msgstr "파일 시스템의 비밀번호 입력(&E):" -#. Label: get same password again for verification -#. Please use newline if label is longer than 40 characters -#. Label: get same password again for verification -#. Please use newline if label is longer than 40 characters -#. Label: get same password again for verification -#. Please use newline if label is longer than 40 characters -#: src/include/partitioning/custom_part_dialogs.rb:147 -#: src/include/partitioning/ep-dialogs.rb:818 src/modules/Storage.rb:4007 +#. Label: get same password again for verification +#. Please use newline if label is longer than 40 characters +#. Label: get same password again for verification +#. Please use newline if label is longer than 40 characters +#. Label: get same password again for verification +#. Please use newline if label is longer than 40 characters +#: src/include/partitioning/custom_part_dialogs.rb:147 +#: src/include/partitioning/ep-dialogs.rb:818 src/modules/Storage.rb:4007 msgid "Reenter the Password for &Verification:" msgstr "확인을 위해 비밀번호 다시 입력(&V):" -#. Cancel button -#: src/include/partitioning/custom_part_dialogs.rb:159 +#. Cancel button +#: src/include/partitioning/custom_part_dialogs.rb:159 msgid "&Skip" msgstr "생략(&S)" -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:188 +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:188 msgid "" "The first and the second version\n" "of the password do not match!\n" @@ -1496,10 +1478,10 @@ "입력한 비밀번호가 다릅니다.\n" "다시 입력해 주십시오.\n" -#. popup text -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:196 -#: src/modules/Storage.rb:3963 +#. popup text +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:196 +#: src/modules/Storage.rb:3963 msgid "" "You did not enter a password.\n" "Try again.\n" @@ -1507,10 +1489,10 @@ "암호를 입력하지 않았습니다.\n" "다시 입력하십시오.\n" -#. popup text -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:203 -#: src/modules/Storage.rb:3971 +#. popup text +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:203 +#: src/modules/Storage.rb:3971 msgid "" "The password must have at least %1 characters.\n" "Try again.\n" @@ -1518,17 +1500,17 @@ "비밀번호는 %1자 이상이어야 합니다.\n" "다시 시도하십시오.\n" -#: src/include/partitioning/custom_part_dialogs.rb:237 +#: src/include/partitioning/custom_part_dialogs.rb:237 msgid "No floating point number." msgstr "부동 소수점 숫자가 없습니다." -#. heading text -#: src/include/partitioning/custom_part_dialogs.rb:361 +#. heading text +#: src/include/partitioning/custom_part_dialogs.rb:361 msgid "File system options:" msgstr "파일 시스템 옵션:" -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:443 +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:443 msgid "" "The character '/' is no longer permitted in a volume label.\n" "Change your volume label so that it does not contain this character.\n" @@ -1536,79 +1518,75 @@ "볼륨 레이블에는 '/' 문자를 사용할 수 없습니다.\n" "이 문자가 포함되지 않도록 볼륨 레이블을 변경하십시오.\n" -#. help text, richtext format -#: src/include/partitioning/custom_part_dialogs.rb:466 +#. help text, richtext format +#: src/include/partitioning/custom_part_dialogs.rb:466 msgid "" "<p><b>Mount in /etc/fstab by:</b>\n" "Normally, a file system to mount is identified in /etc/fstab\n" "by the device name. This identification can be changed so the file system \n" "to mount is found by searching for a UUID or a volume label. Not all file \n" -"systems can be mounted by UUID or a volume label. If an option is " -"disabled, \n" +"systems can be mounted by UUID or a volume label. If an option is disabled, \n" "this is not possible.\n" msgstr "" "<p><b>/etc/fstab에서 마운트:</b>\n" "일반적으로 마운트할 파일 시스템은 /etc/fstab에서 장치 이름별로\n" "식별됩니다. UUID 또는 볼륨 레이블을 검색하여 마운트할 파일 시스템을\n" -"찾을 수 있도록 이 ID를 변경할 수 있습니다. 일부 파일 시스템은 UUID 또는 볼륨 " -"레이블에 의해\n" +"찾을 수 있도록 이 ID를 변경할 수 있습니다. 일부 파일 시스템은 UUID 또는 볼륨 레이블에 의해\n" " 마운트할 수 없습니다. 옵션을 선택하지 않으면 \n" "불가능합니다.\n" -#. help text, richtext format -#: src/include/partitioning/custom_part_dialogs.rb:479 +#. help text, richtext format +#: src/include/partitioning/custom_part_dialogs.rb:479 msgid "" "<p><b>Volume Label:</b>\n" -"The name entered in this field is used as the volume label. This usually " -"makes sense only \n" +"The name entered in this field is used as the volume label. This usually makes sense only \n" "when you activate the option for mounting by volume label.\n" "A volume label cannot contain the / character or spaces.\n" msgstr "" "<p><b>볼륨 레이블:</b>\n" -"이 필드에 입력한 이름은 볼륨 레이블로 사용됩니다. 일반적으로 이 이름은 볼륨 " -"레이블별로 \n" +"이 필드에 입력한 이름은 볼륨 레이블로 사용됩니다. 일반적으로 이 이름은 볼륨 레이블별로 \n" "마운트하기 위한 옵션을 활성화할 때만 인식됩니다.\n" "볼륨 레이블에는 / 문자 또는 공백을 사용할 수 없습니다.\n" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:494 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:494 msgid "Mount in /etc/fstab by" msgstr "/etc/fstab에 의한 마운트" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:501 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:501 msgid "&Device Name" msgstr "장치 이름(&D)" -#. label text -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:508 -#: src/include/partitioning/custom_part_dialogs.rb:544 +#. label text +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:508 +#: src/include/partitioning/custom_part_dialogs.rb:544 msgid "Volume &Label" msgstr "볼륨 레이블(&L)" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:515 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:515 msgid "&UUID" msgstr "&UUID" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:525 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:525 msgid "Device &ID" msgstr "장치 ID(&I)" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:532 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:532 msgid "Device &Path" msgstr "장치 경로(&P)" -#. heading text -#: src/include/partitioning/custom_part_dialogs.rb:672 +#. heading text +#: src/include/partitioning/custom_part_dialogs.rb:672 msgid "Fstab Options:" msgstr "Fstab 옵션:" -#. popup text %1 is a number -#: src/include/partitioning/custom_part_dialogs.rb:846 +#. popup text %1 is a number +#: src/include/partitioning/custom_part_dialogs.rb:846 msgid "" "\n" "Maximum volume label length for the selected file system\n" @@ -1618,63 +1596,63 @@ "선택한 파일 시스템의 최대 볼륨 레이블 길이가\n" "%1입니다. 볼륨 레이블이 이 크기로 잘렸습니다.\n" -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:869 +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:869 msgid "Provide a volume label to mount by label." msgstr "레이블로 마운트하기 위해 볼륨 레이블을 적어주십시오." -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:880 +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:880 msgid "This volume label is already in use. Select a different one." msgstr "이 볼륨 레이블은 이미 사용중입니다. 다른 이름을 사용하십시오." -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:1046 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:1046 msgid "File &System" msgstr "파일 시스템(&S)" -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1053 +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1053 msgid "O&ptions..." msgstr "옵션(&P)..." -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1069 +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1069 msgid "&Encrypt Device" msgstr "장치 암호화(&E)" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:1144 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:1144 msgid "File system &ID:" msgstr "파일 시스템 ID(&I)" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:1176 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:1176 msgid "Format" msgstr "형식" -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1186 +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1186 msgid "Do ¬ format" msgstr "포맷하지 않기(&N)" -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1196 +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1196 msgid "&Format" msgstr "포맷(&F)" -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1249 +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1249 msgid "Fs&tab Options" msgstr "Fstab 옵션(&T)" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:1256 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:1256 msgid "&Mount Point" msgstr "마운트 포인트(&M)" -#. popup text %1 is a partition name, %2 a dirctory -#: src/include/partitioning/custom_part_dialogs.rb:1268 +#. popup text %1 is a partition name, %2 a dirctory +#: src/include/partitioning/custom_part_dialogs.rb:1268 msgid "" "\n" "The selected partition (%1) is currently mounted on %2.\n" @@ -1698,8 +1676,8 @@ "\n" "계속하시겠습니까e?\n" -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1297 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1297 msgid "" "\n" "The file system on the partition cannot be shrunk by YaST2.\n" @@ -1709,8 +1687,8 @@ "YaST2으로는 파티션의 파일 시스템을 축소할 수 없습니다.\n" "FAT, ext2, ext3, ext4 및 reiser인 경우에만 파일 시스템을 축소할 수 있습니다." -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1304 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1304 msgid "" "\n" "The file system on the logical volume cannot be shrunk by YaST2.\n" @@ -1720,22 +1698,22 @@ "YaST2으로는 논리 볼륨의 파일 시스템을 축소할 수 없습니다.\n" "FAT, ext2, ext3, ext4 및 reiser인 경우에만 파일 시스템을 축소할 수 있습니다." -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1316 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1316 msgid "You risk losing data if you shrink this partition." msgstr "이 파티션을 축소하면 데이터가 손실될 수 있습니다." -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1322 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1322 msgid "You risk losing data if you shrink this logical volume." msgstr "이 논리 볼륨을 축소하면 데이터가 손실될 수 있습니다." -#: src/include/partitioning/custom_part_dialogs.rb:1326 +#: src/include/partitioning/custom_part_dialogs.rb:1326 msgid "Continue?" msgstr "계속하시겠습니까?" -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1342 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1342 msgid "" "\n" "The file system on the selected partition cannot be extended by YaST2.\n" @@ -1745,8 +1723,8 @@ "YaST2으로는 선택한 파티션의 파일 시스템을 확장할 수 없습니다.\n" "FAT, ext2, ext3, ext4 및 reiser인 경우에만 파일 시스템을 확장할 수 있습니다." -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1349 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1349 msgid "" "\n" "The file system on the selected logical volume cannot be extended by YaST2.\n" @@ -1756,20 +1734,20 @@ "YaST2으로는 선택한 논리 볼륨의 파일 시스템을 확장할 수 없습니다.\n" "FAT, ext2, ext3, ext4 및 reiser인 경우에만 파일 시스템을 확장할 수 있습니다." -#: src/include/partitioning/custom_part_dialogs.rb:1357 +#: src/include/partitioning/custom_part_dialogs.rb:1357 msgid "Continue resizing?" msgstr "크기 조정 작업을 계속하시겠습니까?" -#. Popup text -#: src/include/partitioning/custom_part_dialogs.rb:1374 +#. Popup text +#: src/include/partitioning/custom_part_dialogs.rb:1374 msgid "You decreased a partition with a reiser file system on it." msgstr "Reiser 파일 시스템이 사용하고 있는 파티션을 축소했습니다." -#: src/include/partitioning/custom_part_dialogs.rb:1376 +#: src/include/partitioning/custom_part_dialogs.rb:1376 msgid "You decreased a logical volume with a reiser file system on it." msgstr "Reiser 파일 시스템이 사용하고 있는 논리 볼륨을 축소했습니다." -#: src/include/partitioning/custom_part_dialogs.rb:1383 +#: src/include/partitioning/custom_part_dialogs.rb:1383 msgid "" "\n" "It is possible to shrink a reiser file system, but this feature is not\n" @@ -1783,22 +1761,20 @@ "\n" "파일 시스템을 축소하시겠습니까?" -#. popup text, %1 is replaced by device name -#: src/include/partitioning/custom_part_dialogs.rb:1437 +#. popup text, %1 is replaced by device name +#: src/include/partitioning/custom_part_dialogs.rb:1437 msgid "" "The selected device contains partitions that are currently mounted:\n" "%1\n" -"We *strongly* recommended to unmount these partitions before deleting the " -"partition table.\n" +"We *strongly* recommended to unmount these partitions before deleting the partition table.\n" "Choose Cancel unless you know exactly what you are doing.\n" msgstr "" "선택한 장치에 현재 마운트된 파티션이 있습니다.\n" "%1\n" -"파티션 테이블을 삭제하기 전에 이 파티션 마운트를 해제하는 것이 *좋습니다*. 현" -"재 수행 중인 작업을 정확히 모를 경우 \"취소\"를 선택하십시오.\n" +"파티션 테이블을 삭제하기 전에 이 파티션 마운트를 해제하는 것이 *좋습니다*. 현재 수행 중인 작업을 정확히 모를 경우 \"취소\"를 선택하십시오.\n" -#. popup text, Do not translate LVM. -#: src/include/partitioning/custom_part_dialogs.rb:1460 +#. popup text, Do not translate LVM. +#: src/include/partitioning/custom_part_dialogs.rb:1460 msgid "" "\n" "The selected device contains at least one LVM partition\n" @@ -1812,8 +1788,8 @@ "해당하는 볼륨 그룹의 파티션을\n" "모두 제거하십시오.\n" -#. popup text, Do not translate RAID. -#: src/include/partitioning/custom_part_dialogs.rb:1471 +#. popup text, Do not translate RAID. +#: src/include/partitioning/custom_part_dialogs.rb:1471 msgid "" "\n" "The selected device contains at least one partition\n" @@ -1826,8 +1802,8 @@ "하나 이상 있습니다.\n" "장치를 삭제하기 전에 해당 RAID 시스템에서 파티션 할당을 해제하십시오.\n" -#. popup text -#: src/include/partitioning/custom_part_dialogs.rb:1482 +#. popup text +#: src/include/partitioning/custom_part_dialogs.rb:1482 msgid "" "\n" "The selected device contains at least one partition\n" @@ -1839,57 +1815,56 @@ "하나 이상 있습니다. 장치를 삭제하기 전에 먼저\n" "파티션을 사용하는 볼륨을 삭제하십시오.\n" -#. help text, richtext format -#: src/include/partitioning/custom_part_dialogs.rb:1543 +#. help text, richtext format +#: src/include/partitioning/custom_part_dialogs.rb:1543 msgid "<p>Create and remove subvolumes from a Btrfs filesystem.</p>\n" msgstr "<p>Btrfs 파일 시스템에서 하위 볼륨을 생성 및 제거합니다.</p>\n" -#: src/include/partitioning/custom_part_dialogs.rb:1548 +#: src/include/partitioning/custom_part_dialogs.rb:1548 msgid "<p>Enable automatic snapshots for a Btrfs filesystem with snapper.</p>" -msgstr "" -"<p>스냅퍼를 통한 Btrfs 파일 시스템에 대한 자동 스냅샷을 활성화합니다.</p>" +msgstr "<p>스냅퍼를 통한 Btrfs 파일 시스템에 대한 자동 스냅샷을 활성화합니다.</p>" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:1562 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:1562 msgid "Existing Subvolumes:" msgstr "기존 하위 볼륨:" -#. label text -#: src/include/partitioning/custom_part_dialogs.rb:1568 +#. label text +#: src/include/partitioning/custom_part_dialogs.rb:1568 msgid "New Subvolume" msgstr "새 하위 볼륨" -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1574 +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1574 msgid "Add new" msgstr "새로 추가" -#. button text -#. push button text -#: src/include/partitioning/custom_part_dialogs.rb:1580 -#: src/modules/DualMultiSelectionBox.rb:147 +#. button text +#. push button text +#: src/include/partitioning/custom_part_dialogs.rb:1580 +#: src/modules/DualMultiSelectionBox.rb:147 msgid "Remove" msgstr "제거" -#. TRANSLATOR: checkbox text -#. TRANSLATORS: checkbox text -#: src/include/partitioning/custom_part_dialogs.rb:1592 -#: src/modules/StorageProposal.rb:6253 +#. TRANSLATOR: checkbox text +#. TRANSLATORS: checkbox text +#: src/include/partitioning/custom_part_dialogs.rb:1592 +#: src/modules/StorageProposal.rb:6253 msgid "Enable Snapshots" msgstr "스냅샷 활성화" -#. heading text -#. button text -#: src/include/partitioning/custom_part_dialogs.rb:1603 -#: src/include/partitioning/custom_part_lib.rb:409 +#. heading text +#. button text +#: src/include/partitioning/custom_part_dialogs.rb:1603 +#: src/include/partitioning/custom_part_lib.rb:409 msgid "Subvolume Handling" msgstr "하위 볼륨 처리" -#: src/include/partitioning/custom_part_dialogs.rb:1666 +#: src/include/partitioning/custom_part_dialogs.rb:1666 msgid "Empty subvolume name not allowed." msgstr "하위 볼륨 이름을 비워둘 수 없습니다." -#: src/include/partitioning/custom_part_dialogs.rb:1671 +#: src/include/partitioning/custom_part_dialogs.rb:1671 msgid "" "Only subvolume names starting with \"%1\" currently allowed!\n" "Automatically prepending \"%1\" to name of subvolume." @@ -1897,16 +1872,16 @@ "현재 \"%1\"(으)로 시작하는 하위 볼륨 이름만 허용됩니다.\n" "하위 볼륨 이름 앞에 \"%1\"을(를) 자동으로 추가합니다." -#: src/include/partitioning/custom_part_dialogs.rb:1681 +#: src/include/partitioning/custom_part_dialogs.rb:1681 msgid "Subvolume name %1 already exists." msgstr "%1 하위 볼륨 이름이 이미 있습니다." -#: src/include/partitioning/custom_part_dialogs.rb:1711 +#: src/include/partitioning/custom_part_dialogs.rb:1711 msgid "Modifications done so far in this dialog will be lost." msgstr "이 대화 상자에서 지금까지 수정한 내용이 유실됩니다." -#. help text for cryptofs -#: src/include/partitioning/custom_part_helptexts.rb:56 +#. help text for cryptofs +#: src/include/partitioning/custom_part_helptexts.rb:56 msgid "" "<p>\n" "Create an encrypted file system.\n" @@ -1916,8 +1891,8 @@ "암호화된 파일 시스템을 생성하십시오.\n" " </p>\n" -#. help text for cryptofs -#: src/include/partitioning/custom_part_helptexts.rb:63 +#. help text for cryptofs +#: src/include/partitioning/custom_part_helptexts.rb:63 msgid "" "<p>\n" "Access an encrypted file system.\n" @@ -1927,8 +1902,8 @@ "암호화된 파일 시스템에 액세스하십시오.\n" " </p>\n" -#. help text for cryptofs -#: src/include/partitioning/custom_part_helptexts.rb:73 +#. help text for cryptofs +#: src/include/partitioning/custom_part_helptexts.rb:73 msgid "" "<p>\n" "Keep in mind that this file system is only protected when it is not\n" @@ -1942,13 +1917,12 @@ " 마찬가지로 안전합니다.\n" " </p>\n" -#. helptext -#: src/include/partitioning/custom_part_helptexts.rb:87 -#: src/include/partitioning/ep-dialogs.rb:746 +#. helptext +#: src/include/partitioning/custom_part_helptexts.rb:87 +#: src/include/partitioning/ep-dialogs.rb:746 msgid "" "<p>\n" -"This mount point corresponds to a temporary filesystem like /tmp or /var/" -"tmp.\n" +"This mount point corresponds to a temporary filesystem like /tmp or /var/tmp.\n" "If you leave the encryption password empty, the system will create\n" "a random password at system startup for you. This means, you will lose all\n" "data on these filesystems at system shutdown.\n" @@ -1961,14 +1935,13 @@ "있는 모든 데이터가 유실됩니다.\n" "</p>\n" -#. help text, continued -#. helptext -#: src/include/partitioning/custom_part_helptexts.rb:100 -#: src/include/partitioning/ep-dialogs.rb:761 +#. help text, continued +#. helptext +#: src/include/partitioning/custom_part_helptexts.rb:100 +#: src/include/partitioning/ep-dialogs.rb:761 msgid "" "<p>\n" -"If you forget your password, you will lose access to the data on your file " -"system.\n" +"If you forget your password, you will lose access to the data on your file system.\n" "Choose your password carefully. A combination of letters and numbers\n" "is recommended. To ensure the password was entered correctly,\n" "enter it twice.\n" @@ -1980,14 +1953,13 @@ "암호가 정확히 입력되었는지 확인하기 위해, 두번 입력하십시오\n" "</p>\n" -#. help text, continued -#. helptext, %1 is replaced by integer -#: src/include/partitioning/custom_part_helptexts.rb:114 -#: src/include/partitioning/ep-dialogs.rb:775 +#. help text, continued +#. helptext, %1 is replaced by integer +#: src/include/partitioning/custom_part_helptexts.rb:114 +#: src/include/partitioning/ep-dialogs.rb:775 msgid "" "<p>\n" -"You must distinguish between uppercase and lowercase. A password should have " -"at\n" +"You must distinguish between uppercase and lowercase. A password should have at\n" "least %1 characters and, as a rule, not contain any special characters\n" "(e.g., letters with accents or umlauts).\n" "</p>\n" @@ -1998,8 +1970,8 @@ " 포함해서는 안 됩니다.\n" " </p>\n" -#. help text, continued -#: src/include/partitioning/custom_part_helptexts.rb:129 +#. help text, continued +#: src/include/partitioning/custom_part_helptexts.rb:129 msgid "" "<p>\n" "Possible characters are\n" @@ -2013,10 +1985,10 @@ "(<tt>A-Za-Z</tt>), 숫자 <tt>0</tt>~<tt>9</tt>입니다.\n" "</p>\n" -#. help text, continued -#. helptext -#: src/include/partitioning/custom_part_helptexts.rb:142 -#: src/include/partitioning/ep-dialogs.rb:787 +#. help text, continued +#. helptext +#: src/include/partitioning/custom_part_helptexts.rb:142 +#: src/include/partitioning/ep-dialogs.rb:787 msgid "" "<p>\n" "Do not forget this password!\n" @@ -2026,8 +1998,8 @@ "이 암호를 잊지 마십시오\n" "</p>" -#. help text for cryptofs -#: src/include/partitioning/custom_part_helptexts.rb:150 +#. help text for cryptofs +#: src/include/partitioning/custom_part_helptexts.rb:150 msgid "" "<p>\n" "You will need to enter your encryption password.\n" @@ -2037,12 +2009,11 @@ "암호화 비밀번호를 입력해야 합니다.\n" "</p>\n" -#. help text, continued -#: src/include/partitioning/custom_part_helptexts.rb:159 +#. help text, continued +#: src/include/partitioning/custom_part_helptexts.rb:159 msgid "" "<p>\n" -"If the encrypted file system does not contain any system file and therefore " -"is\n" +"If the encrypted file system does not contain any system file and therefore is\n" "not needed for the update, you may select <b>Skip</b>. In this case, the\n" "file system is not accessed during update.\n" "</p>\n" @@ -2053,7 +2024,7 @@ "업데이트하는 동안 파일 시스템에 액세스할 수 없습니다.\n" "</p>\n" -#: src/include/partitioning/custom_part_helptexts.rb:173 +#: src/include/partitioning/custom_part_helptexts.rb:173 msgid "" "Warning: With your current setup, your installation\n" "will encounter problems when booting, because the disk on which \n" @@ -2073,7 +2044,7 @@ "이 디스크를 설치에 사용하려면 고급 파티션 관리자에서\n" " 디스크 레이블을 삭제해야 합니다.\n" -#: src/include/partitioning/custom_part_helptexts.rb:187 +#: src/include/partitioning/custom_part_helptexts.rb:187 msgid "" "Warning: Your system states that it requires an EFI \n" "boot setup. Since the selected disk does not contain a \n" @@ -2087,18 +2058,18 @@ "\n" "이 디스크의 모든 파티션을 제거 대상으로 표시해야 합니다.\n" -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:51 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:51 msgid "You cannot use the mount point \"%1\" for LVM.\n" msgstr "LVM에 대해서는 마운트 포인트 \"%1\"을(를) 사용할 수 없습니다.\n" -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:78 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:78 msgid "You cannot use the mount point %1 for RAID." msgstr "RAID에 대해서는 마운트 포인트 %1을(를) 사용할 수 없습니다." -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:97 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:97 msgid "" "You have selected to not automatically mount at start-up a file system\n" "that may contain files that the system needs to work properly.\n" @@ -2114,8 +2085,8 @@ "\n" "계속하시겠습니까?\n" -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:120 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:120 msgid "" "You have assigned an encrypted file system to a partition\n" "with one of the following mount points: \"/\", \"/usr\", \"/boot\",\n" @@ -2127,8 +2098,8 @@ "할당했습니다. 이것은 가능하지 않습니다. 마운트 포인트를 변경하거나\n" " 루프백되지 않은 파일 시스템을 사용하십시오.\n" -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:158 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:158 msgid "" "You have set a file system as mountable by users. The file system\n" "may contain files that need to be executable.\n" @@ -2144,50 +2115,46 @@ "\n" " 계속하시겠습니까?\n" -#. Check all mount points and return true if the mount point is ok. -#. @param [Hash{String => map}] targetMap the TargetMap -#. @param mount mount point -#. @return [Boolean] -#: src/include/partitioning/custom_part_lib.rb:205 +#. Check all mount points and return true if the mount point is ok. +#. @param [Hash{String => map}] targetMap the TargetMap +#. @param mount mount point +#. @return [Boolean] +#: src/include/partitioning/custom_part_lib.rb:205 msgid "Mount point must not be empty." msgstr "탑재 지점은 비워둘 수 없습니다." -#. error popup -#: src/include/partitioning/custom_part_lib.rb:210 +#. error popup +#: src/include/partitioning/custom_part_lib.rb:210 msgid "Swap devices must have swap as mount point." msgstr "스왑 장치에 탑재 지점으로 스왑을 지정해야 합니다." -#. error popup -#: src/include/partitioning/custom_part_lib.rb:214 +#. error popup +#: src/include/partitioning/custom_part_lib.rb:214 msgid "Only swap devices may have swap as mount point." msgstr "스왑 장치에만 탑재 지점으로 스왑을 지정할 수 있습니다." -#. && mount!="swap" ) -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:229 +#. && mount!="swap" ) +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:229 msgid "This mount point is already in use. Select a different one." msgstr "이 마운트 포인트는 이미 사용중입니다. 다른 것을 선택하십시오." -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:239 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:239 msgid "" "FAT filesystem used for system mount point (/, /usr, /opt, /var, /home).\n" "This is not possible." msgstr "" -"FAT 파일 시스템을 시스템 마운트 포인트( /, /usr, /opt, /var, /home)에 마운트" -"하려합니다.\n" +"FAT 파일 시스템을 시스템 마운트 포인트( /, /usr, /opt, /var, /home)에 마운트하려합니다.\n" "이것은 불가능합니다." -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:248 -msgid "" -"Invalid character in mount point. Do not use \"`'!\"%#\" in a mount point." -msgstr "" -"마운트 포인트에 잘못된 문자가 있습니다. 마우트 포인트에는 \"`'!\"%#\"을 사용" -"하지 마십시오." +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:248 +msgid "Invalid character in mount point. Do not use \"`'!\"%#\" in a mount point." +msgstr "마운트 포인트에 잘못된 문자가 있습니다. 마우트 포인트에는 \"`'!\"%#\"을 사용하지 마십시오." -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:257 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:257 msgid "" "You cannot use any of the following mount points:\n" "/bin, /dev, /etc, /lib, /lib64, /lost+found, /mnt, /proc, /sbin, /sys,\n" @@ -2197,13 +2164,13 @@ "/bin, /dev, /etc, /lib, /lib64, /lost+found, /mnt, /proc, /sbin, /sys,\n" "/var/adm/mnt\n" -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:266 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:266 msgid "Your mount point must start with a \"/\" " msgstr "마운트 포인트는 반드시 \"/\"로 시작해야합니다." -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:272 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:272 msgid "" "It is not allowed to assign the mount point swap\n" "to a device without a swap file system." @@ -2211,9 +2178,9 @@ "스왑 파일 시스템이 없는 장치에\n" "탑재 지점 스왑을 할당할 수 없습니다." -#. warning message, %1 is replaced by fs name (e.g. Ext3) -#. %2 is prelaced by a size (e.g. 10 MB) -#: src/include/partitioning/custom_part_lib.rb:299 +#. warning message, %1 is replaced by fs name (e.g. Ext3) +#. %2 is prelaced by a size (e.g. 10 MB) +#: src/include/partitioning/custom_part_lib.rb:299 msgid "" "Your partition is too small to use %1.\n" "The minimum size for this file system is %2.\n" @@ -2221,8 +2188,8 @@ "파티션이 너무 작아 %1을(를) 사용할 수 없습니다.\n" "이 파일 시스템의 최소 크기는 %2입니다.\n" -#. error popup text -#: src/include/partitioning/custom_part_lib.rb:369 +#. error popup text +#: src/include/partitioning/custom_part_lib.rb:369 msgid "" "It is not allowed to assign a mount point\n" "to a device with nonexistent or unknown file system." @@ -2230,8 +2197,8 @@ "알 수 없거나 존재하지 않는 파일 시스템이\n" "있는 장치에 탑재 지점을 할당할 수 없습니다." -#. warning message, %1 is replaced by fs name (e.g. Ext3) -#: src/include/partitioning/custom_part_lib.rb:482 +#. warning message, %1 is replaced by fs name (e.g. Ext3) +#: src/include/partitioning/custom_part_lib.rb:482 msgid "" "\n" "WARNING:\n" @@ -2253,30 +2220,29 @@ "\n" "이 파일 시스템을 사용하시겠습니까?\n" -#. ////////////////////////////////////////////// -#. modify map new -#: src/include/partitioning/custom_part_lib.rb:924 -#: src/include/partitioning/custom_part_lib.rb:951 +#. ////////////////////////////////////////////// +#. modify map new +#: src/include/partitioning/custom_part_lib.rb:924 +#: src/include/partitioning/custom_part_lib.rb:951 msgid "The file system is currently mounted on %1." msgstr "현재 파일 시스템이 %1에 마운트되어 있습니다." -#: src/include/partitioning/custom_part_lib.rb:929 +#: src/include/partitioning/custom_part_lib.rb:929 msgid "" "You can try to unmount it now, continue without unmounting or cancel.\n" "Click Cancel unless you know exactly what you are doing." msgstr "" -"지금 마운트 해제를 시도하거나, 마운트 해제하지 않고 계속하거나, 취소할 수 있" -"습니다.\n" +"지금 마운트 해제를 시도하거나, 마운트 해제하지 않고 계속하거나, 취소할 수 있습니다.\n" "수행 중인 작업을 정확히 모르는 경우 [취소]를 클릭하십시오." -#. button text -#. button text -#: src/include/partitioning/custom_part_lib.rb:940 -#: src/include/partitioning/custom_part_lib.rb:965 +#. button text +#. button text +#: src/include/partitioning/custom_part_lib.rb:940 +#: src/include/partitioning/custom_part_lib.rb:965 msgid "Unmount" msgstr "탑재 해제" -#: src/include/partitioning/custom_part_lib.rb:956 +#: src/include/partitioning/custom_part_lib.rb:956 msgid "" "You can try to unmount it now or cancel.\n" "Click Cancel unless you know exactly what you are doing." @@ -2284,75 +2250,75 @@ "지금 마운트 해제를 시도하거나 취소할 수 있습니다.\n" "수행 중인 작업을 정확히 모르는 경우 [취소]를 클릭하십시오." -#: src/include/partitioning/custom_part_lib.rb:1002 +#: src/include/partitioning/custom_part_lib.rb:1002 msgid "It is not possible to shrink the file system while it is mounted." msgstr "마운트된 동안에는 파일 시스템을 축소할 수 없습니다." -#: src/include/partitioning/custom_part_lib.rb:1015 +#: src/include/partitioning/custom_part_lib.rb:1015 msgid "It is not possible to extend the file system while it is mounted." msgstr "마운트된 동안에는 파일 시스템을 확장할 수 없습니다." -#: src/include/partitioning/custom_part_lib.rb:1026 +#: src/include/partitioning/custom_part_lib.rb:1026 msgid "It is not possible to resize the file system while it is mounted." msgstr "마운트된 동안에는 파일 시스템의 크기를 조정할 수 없습니다." -#. push button text -#: src/include/partitioning/ep-all.rb:80 +#. push button text +#: src/include/partitioning/ep-all.rb:80 msgid "Rescan Devices" msgstr "장치 다시 스캔(&E)" -#. push button text -#: src/include/partitioning/ep-all.rb:85 +#. push button text +#: src/include/partitioning/ep-all.rb:85 msgid "Import Mount Points..." msgstr "마운트 포인트 임포트..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:94 +#. menu entry text +#: src/include/partitioning/ep-all.rb:94 msgid "Provide Crypt &Passwords..." msgstr "암호 비밀번호 제공(&P)..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:99 +#. menu entry text +#: src/include/partitioning/ep-all.rb:99 msgid "Configure &iSCSI..." msgstr "iSCSI 구성(&I)..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:104 +#. menu entry text +#: src/include/partitioning/ep-all.rb:104 msgid "Configure &FCoE..." msgstr "FCoE 구성(&F)..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:109 +#. menu entry text +#: src/include/partitioning/ep-all.rb:109 msgid "Configure &Multipath..." msgstr "다중 경로 구성(&M)..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:114 +#. menu entry text +#: src/include/partitioning/ep-all.rb:114 msgid "Configure &DASD..." msgstr "DASD 구성(&D)..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:119 +#. menu entry text +#: src/include/partitioning/ep-all.rb:119 msgid "Configure &zFCP..." msgstr "zFCP 구성(&Z)..." -#. menu entry text -#: src/include/partitioning/ep-all.rb:124 +#. menu entry text +#: src/include/partitioning/ep-all.rb:124 msgid "Configure &XPRAM..." msgstr "XPRAM 구성(&X)..." -#. menu button text -#: src/include/partitioning/ep-all.rb:129 +#. menu button text +#: src/include/partitioning/ep-all.rb:129 msgid "Configure..." msgstr "구성..." -#. dialog heading, %1 is replaced with hostname -#: src/include/partitioning/ep-all.rb:140 +#. dialog heading, %1 is replaced with hostname +#: src/include/partitioning/ep-all.rb:140 msgid "Available Storage on %1" msgstr "%1에서 사용 가능한 저장소" -#. helptext -#: src/include/partitioning/ep-all.rb:155 +#. helptext +#: src/include/partitioning/ep-all.rb:155 msgid "" "<p>This view shows all storage devices\n" "available.</p>" @@ -2360,8 +2326,8 @@ "<p>이 보기는 사용 가능한 모든 저장소 장치를\n" "보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-all.rb:163 +#. helptext +#: src/include/partitioning/ep-all.rb:163 msgid "" "<p>By double clicking a table entry,\n" "you navigate to the view with detailed information about the\n" @@ -2371,8 +2337,8 @@ "장치에 대한 세부 정보가 있는 보기로\n" "이동합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-all.rb:173 +#. helptext +#: src/include/partitioning/ep-all.rb:173 msgid "" "<p>By selecting a table entry you can\n" "navigate to the view with detailed information about the device.</p>" @@ -2380,8 +2346,8 @@ "<p>테이블 항목을 선택하면\n" "장치에 대한 세부 정보가 있는 보기로 이동할 수 있습니다.</p>" -#. popup text -#: src/include/partitioning/ep-all.rb:233 +#. popup text +#: src/include/partitioning/ep-all.rb:233 msgid "" "Rescaning disks cancels all current changes.\n" "Really rescan disks?" @@ -2389,8 +2355,8 @@ "디스크를 재검색하면 모든 현재 변경사항이 취소됩니다.\n" "디스크를 재검색하시겠습니까?" -#. popup text -#: src/include/partitioning/ep-all.rb:251 +#. popup text +#: src/include/partitioning/ep-all.rb:251 msgid "" "Calling iSCSI configuration cancels all current changes.\n" "Really call iSCSI configuration?" @@ -2398,8 +2364,8 @@ "iSCSI 구성을 호출하면 모든 현재 변경사항이 취소됩니다.\n" "iSCSI 구성을 호출하시겠습니까?" -#. popup text -#: src/include/partitioning/ep-all.rb:260 +#. popup text +#: src/include/partitioning/ep-all.rb:260 msgid "" "Calling FCoE configuration cancels all current changes.\n" "Really call FCoE configuration?" @@ -2407,10 +2373,10 @@ "FCoE 구성을 호출하면 현재 변경 사항이 모두 취소됩니다.\n" "FCoE 구성을 호출하시겠습니까?" -#. popup text -#. popup text -#: src/include/partitioning/ep-all.rb:274 -#: src/include/partitioning/ep-all.rb:283 +#. popup text +#. popup text +#: src/include/partitioning/ep-all.rb:274 +#: src/include/partitioning/ep-all.rb:283 msgid "" "Calling multipath configuration cancels all current changes.\n" "Really call multipath configuration?\n" @@ -2418,8 +2384,8 @@ "다중 경로 구성을 호출하면 현재 변경사항이 모두 취소됩니다.\n" "다중 경로 구성을 호출하시겠습니까?\n" -#. popup text -#: src/include/partitioning/ep-all.rb:300 +#. popup text +#: src/include/partitioning/ep-all.rb:300 msgid "" "Calling DASD configuration cancels all current changes.\n" "Really call DASD configuration?" @@ -2427,8 +2393,8 @@ "DASD 구성을 호출하면 모든 현재 변경사항이 취소됩니다.\n" "DASD 구성을 호출하시겠습니까?" -#. popup text -#: src/include/partitioning/ep-all.rb:309 +#. popup text +#: src/include/partitioning/ep-all.rb:309 msgid "" "Calling zFCP configuration cancels all current changes.\n" "Really call zFCP configuration?" @@ -2436,8 +2402,8 @@ "zFCP 구성을 호출하면 모든 현재 변경사항이 취소됩니다.\n" "zFCP 구성을 호출하시겠습니까?" -#. popup text -#: src/include/partitioning/ep-all.rb:318 +#. popup text +#: src/include/partitioning/ep-all.rb:318 msgid "" "Calling XPRAM configuration cancels all current changes.\n" "Really call XPRAM configuration?" @@ -2445,50 +2411,50 @@ "XPRAM 구성을 호출하면 모든 현재 변경사항이 취소됩니다.\n" "XPRAM 구성을 호출하시겠습니까?" -#. dialog title -#: src/include/partitioning/ep-btrfs-dialogs.rb:64 +#. dialog title +#: src/include/partitioning/ep-btrfs-dialogs.rb:64 msgid "Edit Btrfs %1" msgstr "BTRFS %1 편집" -#. error popup -#. error popup -#: src/include/partitioning/ep-btrfs-dialogs.rb:165 -#: src/include/partitioning/ep-lvm-dialogs.rb:151 +#. error popup +#. error popup +#: src/include/partitioning/ep-btrfs-dialogs.rb:165 +#: src/include/partitioning/ep-lvm-dialogs.rb:151 msgid "Select at least one device." msgstr "장치를 하나 이상 선택합니다." -#. helptext -#: src/include/partitioning/ep-btrfs-dialogs.rb:175 +#. helptext +#: src/include/partitioning/ep-btrfs-dialogs.rb:175 msgid "<p>Change the devices that are used by the Btrfs volume.</p>" msgstr "<p>BTRFS 볼륨에서 사용되는 장치를 변경합니다.</p>" -#: src/include/partitioning/ep-btrfs-dialogs.rb:219 +#: src/include/partitioning/ep-btrfs-dialogs.rb:219 msgid "Unused Devices:" msgstr "사용하지 않는 장치:" -#. label for selection box -#: src/include/partitioning/ep-btrfs-dialogs.rb:220 -#: src/include/partitioning/ep-raid-dialogs.rb:267 -#: src/include/partitioning/ep-raid-dialogs.rb:531 +#. label for selection box +#: src/include/partitioning/ep-btrfs-dialogs.rb:220 +#: src/include/partitioning/ep-raid-dialogs.rb:267 +#: src/include/partitioning/ep-raid-dialogs.rb:531 msgid "Selected Devices:" msgstr "선택한 장치:" -#. dialog title -#: src/include/partitioning/ep-btrfs-dialogs.rb:291 +#. dialog title +#: src/include/partitioning/ep-btrfs-dialogs.rb:291 msgid "Resize Btrfs Volume %1" msgstr "BTRFS 볼륨 %1 크기 조정" -#. error popup -#. error popup -#. error popup -#: src/include/partitioning/ep-btrfs-lib.rb:35 -#: src/include/partitioning/ep-btrfs-lib.rb:76 -#: src/include/partitioning/ep-btrfs-lib.rb:130 +#. error popup +#. error popup +#. error popup +#: src/include/partitioning/ep-btrfs-lib.rb:35 +#: src/include/partitioning/ep-btrfs-lib.rb:76 +#: src/include/partitioning/ep-btrfs-lib.rb:130 msgid "No Btrfs device selected." msgstr "선택한 BTRFS 장치가 없습니다." -#. error popup -#: src/include/partitioning/ep-btrfs-lib.rb:47 +#. error popup +#: src/include/partitioning/ep-btrfs-lib.rb:47 msgid "" "The Btrfs %1 is in use. It cannot be\n" "edited. To edit %1, make sure it is not used." @@ -2496,176 +2462,174 @@ "BTRFS %1을(를) 사용 중이므로\n" "편집할 수 없습니다. %1을(를) 편집하려면 사용되지 않음을 확인하십시오." -#. error popup -#. error popup -#: src/include/partitioning/ep-btrfs-lib.rb:168 -#: src/include/partitioning/ep-lvm-lib.rb:134 +#. error popup +#. error popup +#: src/include/partitioning/ep-btrfs-lib.rb:168 +#: src/include/partitioning/ep-lvm-lib.rb:134 msgid "Failed to remove some physical devices." msgstr "일부 물리적 장치를 제거하지 못했습니다." -#. TRANSLATORS: context menu entry -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/ep-btrfs.rb:40 -#: src/include/partitioning/ep-dm.rb:36 src/include/partitioning/ep-hd.rb:61 -#: src/include/partitioning/ep-loop.rb:37 -#: src/include/partitioning/ep-lvm.rb:64 -#: src/include/partitioning/ep-raid.rb:38 +#. TRANSLATORS: context menu entry +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/ep-btrfs.rb:40 +#: src/include/partitioning/ep-dm.rb:36 src/include/partitioning/ep-hd.rb:61 +#: src/include/partitioning/ep-loop.rb:37 +#: src/include/partitioning/ep-lvm.rb:64 +#: src/include/partitioning/ep-raid.rb:38 msgid "Edit" msgstr "편집" -#. TRANSLATORS: context menu entry -#. disabled, see bnc #832196 -#. Item(Id(:resize), _("Resize")), -#. TRANSLATORS: context menu entry -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/ep-btrfs.rb:45 -#: src/include/partitioning/ep-hd.rb:43 src/include/partitioning/ep-hd.rb:64 -#: src/include/partitioning/ep-loop.rb:37 -#: src/include/partitioning/ep-lvm.rb:44 -#: src/include/partitioning/ep-lvm.rb:66 -#: src/include/partitioning/ep-raid.rb:40 -#: src/include/partitioning/ep-tmpfs.rb:36 +#. TRANSLATORS: context menu entry +#. disabled, see bnc #832196 +#. Item(Id(:resize), _("Resize")), +#. TRANSLATORS: context menu entry +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/ep-btrfs.rb:45 +#: src/include/partitioning/ep-hd.rb:43 src/include/partitioning/ep-hd.rb:64 +#: src/include/partitioning/ep-loop.rb:37 +#: src/include/partitioning/ep-lvm.rb:44 src/include/partitioning/ep-lvm.rb:66 +#: src/include/partitioning/ep-raid.rb:40 +#: src/include/partitioning/ep-tmpfs.rb:36 msgid "Delete" msgstr "삭제" -#. heading -#: src/include/partitioning/ep-btrfs.rb:130 +#. heading +#: src/include/partitioning/ep-btrfs.rb:130 msgid "Btrfs Volumes" msgstr "BTRFS 볼륨" -#. TRANSLATORS: push button text -#. push button text -#. push button text -#. push button text -#. push button text -#. push button text -#. push button text -#: src/include/partitioning/ep-btrfs.rb:140 -#: src/include/partitioning/ep-btrfs.rb:205 -#: src/include/partitioning/ep-dm.rb:153 src/include/partitioning/ep-hd.rb:86 -#: src/include/partitioning/ep-loop.rb:54 -#: src/include/partitioning/ep-lvm.rb:86 -#: src/include/partitioning/ep-raid.rb:59 +#. TRANSLATORS: push button text +#. push button text +#. push button text +#. push button text +#. push button text +#. push button text +#. push button text +#: src/include/partitioning/ep-btrfs.rb:140 +#: src/include/partitioning/ep-btrfs.rb:205 +#: src/include/partitioning/ep-dm.rb:153 src/include/partitioning/ep-hd.rb:86 +#: src/include/partitioning/ep-loop.rb:54 +#: src/include/partitioning/ep-lvm.rb:86 +#: src/include/partitioning/ep-raid.rb:59 msgid "Edit..." msgstr "편집..." -#. TRANSLATORS: push button text -#. disabled, see bnc #832196 -#. PushButton(Id(:resize), Opt(:key_F8), _("Resize...")), -#. TRANSLATORS: push button text -#. push button text -#. push button text -#. push button text -#. push button text -#. push button text -#. push button text -#: src/include/partitioning/ep-btrfs.rb:145 -#: src/include/partitioning/ep-hd.rb:92 -#: src/include/partitioning/ep-loop.rb:56 -#: src/include/partitioning/ep-lvm.rb:90 -#: src/include/partitioning/ep-raid.rb:63 -#: src/include/partitioning/ep-tmpfs.rb:112 -#: src/include/partitioning/ep-tmpfs.rb:170 +#. TRANSLATORS: push button text +#. disabled, see bnc #832196 +#. PushButton(Id(:resize), Opt(:key_F8), _("Resize...")), +#. TRANSLATORS: push button text +#. push button text +#. push button text +#. push button text +#. push button text +#. push button text +#. push button text +#: src/include/partitioning/ep-btrfs.rb:145 +#: src/include/partitioning/ep-hd.rb:92 src/include/partitioning/ep-loop.rb:56 +#: src/include/partitioning/ep-lvm.rb:90 +#: src/include/partitioning/ep-raid.rb:63 +#: src/include/partitioning/ep-tmpfs.rb:112 +#: src/include/partitioning/ep-tmpfs.rb:170 msgid "Delete..." msgstr "삭제..." -#. helptext -#: src/include/partitioning/ep-btrfs.rb:154 +#. helptext +#: src/include/partitioning/ep-btrfs.rb:154 msgid "<p>This view shows all Btrfs volumes.</p>" msgstr "<p>이 보기는 모든 BTRFS 볼륨을 표시합니다.</p>" -#. helptext -#: src/include/partitioning/ep-btrfs.rb:213 +#. helptext +#: src/include/partitioning/ep-btrfs.rb:213 msgid "" "<p>This view shows detailed information about the\n" "selected Btrfs volume.</p>\n" @@ -2673,8 +2637,8 @@ "<p>이 보기는 선택한 BTRFS 볼륨에 대한\n" "세부 정보를 표시합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-btrfs.rb:289 +#. helptext +#: src/include/partitioning/ep-btrfs.rb:289 msgid "" "<p>This view shows all devices used by the\n" "selected Btrfs volume.</p>\n" @@ -2682,74 +2646,72 @@ "<p>이 보기는 선택한 BTRFS 볼륨에서 사용된\n" "모든 장치를 표시합니다.</p>\n" -#. heading -#: src/include/partitioning/ep-btrfs.rb:330 +#. heading +#: src/include/partitioning/ep-btrfs.rb:330 msgid "Btrfs Device: %1" msgstr "BTRFS 장치: %1" -#. push button text -#. push button text -#. tab heading -#. push button text -#. push button text -#. push button text -#: src/include/partitioning/ep-btrfs.rb:337 -#: src/include/partitioning/ep-dm.rb:272 -#: src/include/partitioning/ep-hd.rb:644 -#: src/include/partitioning/ep-lvm.rb:467 -#: src/include/partitioning/ep-raid.rb:315 -#: src/include/partitioning/ep-tmpfs.rb:241 +#. push button text +#. push button text +#. tab heading +#. push button text +#. push button text +#. push button text +#: src/include/partitioning/ep-btrfs.rb:337 +#: src/include/partitioning/ep-dm.rb:272 src/include/partitioning/ep-hd.rb:644 +#: src/include/partitioning/ep-lvm.rb:467 +#: src/include/partitioning/ep-raid.rb:315 +#: src/include/partitioning/ep-tmpfs.rb:241 msgid "&Overview" msgstr "개요(&O)" -#. push button text -#. push button text -#. tab heading -#. push button text -#: src/include/partitioning/ep-btrfs.rb:339 -#: src/include/partitioning/ep-dm.rb:274 -#: src/include/partitioning/ep-hd.rb:651 -#: src/include/partitioning/ep-raid.rb:317 +#. push button text +#. push button text +#. tab heading +#. push button text +#: src/include/partitioning/ep-btrfs.rb:339 +#: src/include/partitioning/ep-dm.rb:274 src/include/partitioning/ep-hd.rb:651 +#: src/include/partitioning/ep-raid.rb:317 msgid "&Used Devices" msgstr "사용된 장치(&U)" -#. helptext -#: src/include/partitioning/ep-dialogs.rb:39 +#. helptext +#: src/include/partitioning/ep-dialogs.rb:39 msgid "<p>Choose the role of the device.</p>" msgstr "<p>장치의 역할을 선택하십시오.</p>" -#. radio button text -#: src/include/partitioning/ep-dialogs.rb:56 +#. radio button text +#: src/include/partitioning/ep-dialogs.rb:56 msgid "EFI Boot Partition" msgstr "EFI 부트 파티션" -#. radio button text -#: src/include/partitioning/ep-dialogs.rb:64 +#. radio button text +#: src/include/partitioning/ep-dialogs.rb:64 msgid "Operating System" msgstr "운영 체제" -#. radio button text -#: src/include/partitioning/ep-dialogs.rb:69 +#. radio button text +#: src/include/partitioning/ep-dialogs.rb:69 msgid "Data and ISV Applications" msgstr "데이터 및 ISV 응용 프로그램" -#. radio button text -#: src/include/partitioning/ep-dialogs.rb:75 +#. radio button text +#: src/include/partitioning/ep-dialogs.rb:75 msgid "Swap" msgstr "바꾸기" -#. radio button text -#: src/include/partitioning/ep-dialogs.rb:80 +#. radio button text +#: src/include/partitioning/ep-dialogs.rb:80 msgid "Raw Volume (unformatted)" msgstr "원시 볼륨(포맷되지 않음)" -#. heading for a frame in a dialog -#: src/include/partitioning/ep-dialogs.rb:88 +#. heading for a frame in a dialog +#: src/include/partitioning/ep-dialogs.rb:88 msgid "Role" msgstr "역할" -#. helptext -#: src/include/partitioning/ep-dialogs.rb:120 +#. helptext +#: src/include/partitioning/ep-dialogs.rb:120 msgid "" "<p>First, choose whether the partition should be\n" "formatted and the desired file system type.</p>" @@ -2757,20 +2719,19 @@ "<p>먼저, 파티션을 포맷할지 여부와\n" "원하는 파일 시스템 유형을 선택합니다.</p>" -#. helptext -#: src/include/partitioning/ep-dialogs.rb:127 +#. helptext +#: src/include/partitioning/ep-dialogs.rb:127 msgid "" "<p>If you want to encrypt all data on the\n" -"volume, select <b>Encrypt Device</b>. Changing the encryption on an " -"existing\n" +"volume, select <b>Encrypt Device</b>. Changing the encryption on an existing\n" "volume will delete all data on it.</p>\n" msgstr "" "<p>볼륨의 모든 데이터를 암호화하려면\n" "<b>장치 암호화</b>를 선택합니다. 기존 볼륨의 암호화를 변경하면\n" "해당 볼륨의 모든 데이터가 삭제됩니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-dialogs.rb:137 +#. helptext +#: src/include/partitioning/ep-dialogs.rb:137 msgid "" "<p>Then, choose whether the partition should\n" "be mounted and enter the mount point (/, /boot, /home, /var, etc.).</p>" @@ -2778,49 +2739,48 @@ "<p>그런 다음 파티션을 마운트해야 할지\n" "여부를 선택하고 마운트 포인트(/, /boot, /home, /var 등)를 입력하십시오.</p>" -#. set globals -#: src/include/partitioning/ep-dialogs.rb:337 +#. set globals +#: src/include/partitioning/ep-dialogs.rb:337 msgid "Formatting Options" msgstr "포맷 옵션" -#: src/include/partitioning/ep-dialogs.rb:345 +#: src/include/partitioning/ep-dialogs.rb:345 msgid "Format partition" msgstr "파티션 포맷" -#: src/include/partitioning/ep-dialogs.rb:356 +#: src/include/partitioning/ep-dialogs.rb:356 msgid "Do not format partition" msgstr "파티션 포맷 안 함" -#: src/include/partitioning/ep-dialogs.rb:372 +#: src/include/partitioning/ep-dialogs.rb:372 msgid "Do not mount partition" msgstr "파티션 마운트 안 함" -#: src/include/partitioning/ep-dialogs.rb:391 +#: src/include/partitioning/ep-dialogs.rb:391 msgid "Mounting Options" msgstr "마운트 옵션" -#: src/include/partitioning/ep-dialogs.rb:399 +#: src/include/partitioning/ep-dialogs.rb:399 msgid "Mount partition" msgstr "파티션 마운트" -#. Column header -#: src/include/partitioning/ep-dialogs.rb:405 -#: src/modules/StorageFields.rb:144 +#. Column header +#: src/include/partitioning/ep-dialogs.rb:405 src/modules/StorageFields.rb:144 msgid "Mount Point" msgstr "탑재 지점" -#. button text -#: src/include/partitioning/ep-dialogs.rb:412 +#. button text +#: src/include/partitioning/ep-dialogs.rb:412 msgid "Fs&tab Options..." msgstr "Fstab 옵션(&T)..." -#. error popup -#: src/include/partitioning/ep-dialogs.rb:596 +#. error popup +#: src/include/partitioning/ep-dialogs.rb:596 msgid "Crypt files must be encrypted." msgstr "암호화 파일은 암호화되어야 합니다." -#. error popup -#: src/include/partitioning/ep-dialogs.rb:607 +#. error popup +#: src/include/partitioning/ep-dialogs.rb:607 msgid "" "You chose to create the crypt file, but did not specify\n" "that it should be formatted. This does not make sense.\n" @@ -2832,18 +2792,18 @@ "\n" "포맷 옵션도 확인하십시오.\n" -#. error popup -#: src/include/partitioning/ep-dialogs.rb:623 +#. error popup +#: src/include/partitioning/ep-dialogs.rb:623 msgid "Crypt files require a mount point." msgstr "암호화 파일에는 탑재 지점이 필요합니다." -#. error popup -#: src/include/partitioning/ep-dialogs.rb:637 +#. error popup +#: src/include/partitioning/ep-dialogs.rb:637 msgid "Tmpfs requires a mount point." msgstr "TMPFS에는 마운트 포인트가 필요합니다." -#. helptext -#: src/include/partitioning/ep-dialogs.rb:721 +#. helptext +#: src/include/partitioning/ep-dialogs.rb:721 msgid "" "<p>\n" "Keep in mind that this file system is only protected when it is not\n" @@ -2857,8 +2817,8 @@ "마찬가지로 안전합니다.\n" "</p>" -#. helptext -#: src/include/partitioning/ep-dialogs.rb:734 +#. helptext +#: src/include/partitioning/ep-dialogs.rb:734 msgid "" "<p>\n" "The file system used for this volume is swap. You can leave the encryption \n" @@ -2867,27 +2827,26 @@ "</p>\n" msgstr "" "<p>\n" -"이 볼륨에 사용된 파일 시스템이 스왑입니다. 암호화 비밀번호를 지정하지 않을 " -"수 있지만\n" +"이 볼륨에 사용된 파일 시스템이 스왑입니다. 암호화 비밀번호를 지정하지 않을 수 있지만\n" "이렇게 하면 스왑 장치를 최대 절전 모드(디스크 일시 중단)로\n" "사용할 수 없습니다.\n" "</p>\n" -#: src/include/partitioning/ep-dialogs.rb:804 +#: src/include/partitioning/ep-dialogs.rb:804 msgid "All data stored on the volume will be lost!" msgstr "볼륨에 저장된 모든 데이터가 유실됩니다!" -#: src/include/partitioning/ep-dialogs.rb:827 +#: src/include/partitioning/ep-dialogs.rb:827 msgid "Password" msgstr "비밀번호" -#. popup text -#: src/include/partitioning/ep-dialogs.rb:924 +#. popup text +#: src/include/partitioning/ep-dialogs.rb:924 msgid "Resize not supported by underlying device." msgstr "기본 장치에서 크기 조정이 지원되지 않습니다." -#. popup text -#: src/include/partitioning/ep-dialogs.rb:929 +#. popup text +#: src/include/partitioning/ep-dialogs.rb:929 msgid "" "\n" "You cannot resize the selected partition because the file system\n" @@ -2897,7 +2856,7 @@ "선택한 파티션의 파일 시스템이 크기 조정을 지원하지 않기 때문에\n" " 파티션의 크기를 조정할 수 없습니다.\n" -#: src/include/partitioning/ep-dialogs.rb:953 +#: src/include/partitioning/ep-dialogs.rb:953 msgid "" "It is not possible to check whether a NTFS\n" "can be resized while it is mounted." @@ -2905,8 +2864,8 @@ "마운트된 동안에는 NTFS 크기를 조정할 수 있는지\n" "여부를 확인할 수 없습니다." -#. FIXME: Really? -#: src/include/partitioning/ep-dialogs.rb:972 +#. FIXME: Really? +#: src/include/partitioning/ep-dialogs.rb:972 msgid "" "Partition %1 cannot be resized\n" "because the filesystem seems to be inconsistent.\n" @@ -2914,79 +2873,79 @@ "파일 시스템에 일관성이 없기 때문에\n" "%1 파티션의 크기를 조정할 수 없습니다.\n" -#. Heading for dialog -#: src/include/partitioning/ep-dialogs.rb:999 +#. Heading for dialog +#: src/include/partitioning/ep-dialogs.rb:999 msgid "Resize Partition %1" msgstr "파티션 %1 크기 조정" -#. Heading for dialog -#: src/include/partitioning/ep-dialogs.rb:1020 +#. Heading for dialog +#: src/include/partitioning/ep-dialogs.rb:1020 msgid "Resize Logical Volume %1" msgstr "논리적 볼륨 %1 크기 조정" -#. size_k + min_size_k could be > max_size_k -#: src/include/partitioning/ep-dialogs.rb:1052 +#. size_k + min_size_k could be > max_size_k +#: src/include/partitioning/ep-dialogs.rb:1052 msgid "Current size: %1" msgstr "현재 크기: %1" -#: src/include/partitioning/ep-dialogs.rb:1064 +#: src/include/partitioning/ep-dialogs.rb:1064 msgid "Currently used: %1" msgstr "현재 사용: %1" -#. frame heading -#. input field label -#. combo box label -#. Column header -#: src/include/partitioning/ep-dialogs.rb:1077 -#: src/include/partitioning/ep-dialogs.rb:1114 -#: src/include/partitioning/ep-hd-dialogs.rb:256 -#: src/include/partitioning/ep-loop-dialogs.rb:118 -#: src/include/partitioning/ep-lvm-dialogs.rb:559 -#: src/include/partitioning/ep-lvm-dialogs.rb:573 -#: src/include/partitioning/ep-lvm-dialogs.rb:616 -#: src/modules/StorageFields.rb:129 +#. frame heading +#. input field label +#. combo box label +#. Column header +#: src/include/partitioning/ep-dialogs.rb:1077 +#: src/include/partitioning/ep-dialogs.rb:1114 +#: src/include/partitioning/ep-hd-dialogs.rb:256 +#: src/include/partitioning/ep-loop-dialogs.rb:118 +#: src/include/partitioning/ep-lvm-dialogs.rb:559 +#: src/include/partitioning/ep-lvm-dialogs.rb:573 +#: src/include/partitioning/ep-lvm-dialogs.rb:616 +#: src/modules/StorageFields.rb:129 msgid "Size" msgstr "크기" -#. radio button text, %1 is replaced by size -#. radio button text, %1 is replaced by size -#: src/include/partitioning/ep-dialogs.rb:1087 -#: src/include/partitioning/ep-hd-dialogs.rb:242 -#: src/include/partitioning/ep-lvm-dialogs.rb:535 +#. radio button text, %1 is replaced by size +#. radio button text, %1 is replaced by size +#: src/include/partitioning/ep-dialogs.rb:1087 +#: src/include/partitioning/ep-hd-dialogs.rb:242 +#: src/include/partitioning/ep-lvm-dialogs.rb:535 msgid "Maximum Size (%1)" msgstr "최대 크기(%1)" -#. radio button text, %1 is replaced by size -#: src/include/partitioning/ep-dialogs.rb:1097 +#. radio button text, %1 is replaced by size +#: src/include/partitioning/ep-dialogs.rb:1097 msgid "Minimum Size (%1)" msgstr "최소 크기(%1)" -#. radio button text -#. radio button text -#: src/include/partitioning/ep-dialogs.rb:1106 -#: src/include/partitioning/ep-hd-dialogs.rb:251 -#: src/include/partitioning/ep-lvm-dialogs.rb:568 +#. radio button text +#. radio button text +#: src/include/partitioning/ep-dialogs.rb:1106 +#: src/include/partitioning/ep-hd-dialogs.rb:251 +#: src/include/partitioning/ep-lvm-dialogs.rb:568 msgid "Custom Size" msgstr "사용자 정의 크기" -#. help text -#: src/include/partitioning/ep-dialogs.rb:1140 +#. help text +#: src/include/partitioning/ep-dialogs.rb:1140 msgid "<p>Choose new size.</p>" msgstr "<p>새 크기를 선택합니다.</p>" -#. error popup, %1 and %2 are replaced by sizes -#. error popup, %1 and %2 are replaced by sizes -#: src/include/partitioning/ep-dialogs.rb:1191 -#: src/include/partitioning/ep-hd-dialogs.rb:359 -#: src/include/partitioning/ep-lvm-dialogs.rb:692 +#. error popup, %1 and %2 are replaced by sizes +#. error popup, %1 and %2 are replaced by sizes +#: src/include/partitioning/ep-dialogs.rb:1191 +#: src/include/partitioning/ep-hd-dialogs.rb:359 +#: src/include/partitioning/ep-lvm-dialogs.rb:692 msgid "The size entered is invalid. Enter a size between %1 and %2." msgstr "입력한 크기가 잘못되었습니다. 크기를 %1과(와) %2 사이로 입력합니다." -#. FIXME: To check whether the part. can be resized only -#. after user tries to do that is stupid - in some cases -#. we can tell beforehand, thus user should never get to this -#. point (e.g. when the partition is mounted) -#: src/include/partitioning/ep-dialogs.rb:1234 +#. FIXME: To check whether the part. can be resized only +#. after user tries to do that is stupid - in some cases +#. we can tell beforehand, thus user should never get to this +#. point (e.g. when the partition is mounted) +#: src/include/partitioning/ep-dialogs.rb:1234 msgid "" "You are extending a mounted filesystem by %1 Gigabyte. \n" "This may be quite slow and can take hours. You might possibly want \n" @@ -2997,28 +2956,28 @@ "작업 속도가 느리고 몇 시간이 걸릴 수도 있습니다. 파일 시스템을 \n" "마운트 해제하면 크기 조정 작업 속도가 향상됩니다." -#. label for log view -#: src/include/partitioning/ep-dialogs.rb:1310 +#. label for log view +#: src/include/partitioning/ep-dialogs.rb:1310 msgid "Output of %1" msgstr "%1의 출력" -#. popup text -#: src/include/partitioning/ep-dialogs.rb:1337 +#. popup text +#: src/include/partitioning/ep-dialogs.rb:1337 msgid "Rescanning disks..." msgstr "디스크 재검색 중..." -#. dialog title -#: src/include/partitioning/ep-dm-dialogs.rb:62 +#. dialog title +#: src/include/partitioning/ep-dm-dialogs.rb:62 msgid "Edit DM %1" msgstr "DM %1 편집" -#. error popup -#: src/include/partitioning/ep-dm-lib.rb:35 +#. error popup +#: src/include/partitioning/ep-dm-lib.rb:35 msgid "No DM device selected." msgstr "DM 장치를 선택하지 않았습니다." -#. error popup -#: src/include/partitioning/ep-dm-lib.rb:46 +#. error popup +#: src/include/partitioning/ep-dm-lib.rb:46 msgid "" "The DM %1 is in use. It cannot be\n" "edited. To edit %1, make sure it is not used." @@ -3026,13 +2985,13 @@ "DM %1이(가) 사용 중이므로\n" "편집할 수 없습니다. %1을(를) 편집하려면 사용되지 않도록 합니다." -#. heading -#: src/include/partitioning/ep-dm.rb:85 +#. heading +#: src/include/partitioning/ep-dm.rb:85 msgid "Device Mapper (DM)" msgstr "장치 매퍼(DM)" -#. helptext -#: src/include/partitioning/ep-dm.rb:97 +#. helptext +#: src/include/partitioning/ep-dm.rb:97 msgid "" "<p>This view shows all Device Mapper devices except for those already \n" "included in some other view. Therefore multipath disks,\n" @@ -3042,8 +3001,8 @@ "모든 장치 매퍼 장치를 표시합니다. 따라서 다중 경로 디스크,\n" "BIOS RAID 및 LVM 논리적 볼륨은 여기에 표시되지 않습니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-dm.rb:161 +#. helptext +#: src/include/partitioning/ep-dm.rb:161 msgid "" "<p>This view shows detailed information about the\n" "selected Device Mapper device.</p>" @@ -3051,8 +3010,8 @@ "<p>이 보기는 선택한 장치 매퍼 장치에 대한\n" "세부 정보를 보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-dm.rb:232 +#. helptext +#: src/include/partitioning/ep-dm.rb:232 msgid "" "<p>This view shows all devices used by the\n" "selected Device Mapper device.</p>" @@ -3060,185 +3019,185 @@ "<p>이 보기는 선택한 장치 매퍼 장치에서 사용한\n" "모든 장치를 보여 줍니다.</p>" -#. heading -#: src/include/partitioning/ep-dm.rb:265 +#. heading +#: src/include/partitioning/ep-dm.rb:265 msgid "DM Device: %1" msgstr "DM 장치: %1" -#. encoding: utf-8 -#. Copyright (c) [2012-2015] Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-graph.rb -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/ep-graph.rb:39 +#. encoding: utf-8 +#. Copyright (c) [2012-2015] Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-graph.rb +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/ep-graph.rb:39 msgid "Add RAID" msgstr "RAID 추가" -#. dialog title -#: src/include/partitioning/ep-graph.rb:44 -#: src/include/partitioning/ep-lvm-dialogs.rb:475 +#. dialog title +#: src/include/partitioning/ep-graph.rb:44 +#: src/include/partitioning/ep-lvm-dialogs.rb:475 msgid "Add Volume Group" msgstr "볼륨 그룹 추가" -#. dialog heading, graph is the mathematic term for -#. a set of notes connected with edges -#. tree node label -#: src/include/partitioning/ep-graph.rb:70 -#: src/include/partitioning/ep-main.rb:447 +#. dialog heading, graph is the mathematic term for +#. a set of notes connected with edges +#. tree node label +#: src/include/partitioning/ep-graph.rb:70 +#: src/include/partitioning/ep-main.rb:447 msgid "Device Graph" msgstr "장치 그래프" -#. button text -#: src/include/partitioning/ep-graph.rb:74 +#. button text +#: src/include/partitioning/ep-graph.rb:74 msgid "Save Device Graph..." msgstr "장치 그래프 저장..." -#. helptext -#: src/include/partitioning/ep-graph.rb:84 +#. helptext +#: src/include/partitioning/ep-graph.rb:84 msgid "<p>This view shows a graph of devices.</p>" msgstr "<p>이 보기는 장치 그래프를 나타냅니다.</p>" -#. error popup -#. error popup -#: src/include/partitioning/ep-graph.rb:140 -#: src/include/partitioning/ep-graph.rb:214 +#. error popup +#. error popup +#: src/include/partitioning/ep-graph.rb:140 +#: src/include/partitioning/ep-graph.rb:214 msgid "Saving graph file failed." msgstr "그래프 파일을 저장하지 못했습니다." -#. dialog heading, graph is the mathematic term for -#. a set of notes connected with edges -#. tree node label -#: src/include/partitioning/ep-graph.rb:159 -#: src/include/partitioning/ep-main.rb:453 +#. dialog heading, graph is the mathematic term for +#. a set of notes connected with edges +#. tree node label +#: src/include/partitioning/ep-graph.rb:159 +#: src/include/partitioning/ep-main.rb:453 msgid "Mount Graph" msgstr "마운트 그래프" -#. button text -#: src/include/partitioning/ep-graph.rb:163 +#. button text +#: src/include/partitioning/ep-graph.rb:163 msgid "Save Mount Graph..." msgstr "마운트 그래프 저장..." -#. helptext -#: src/include/partitioning/ep-graph.rb:173 +#. helptext +#: src/include/partitioning/ep-graph.rb:173 msgid "<p>This view shows a graph of mount points.</p>" msgstr "<p>이 보기는 마운트 포인트의 그래프를 나타냅니다.</p>" -#. helptext -#: src/include/partitioning/ep-hd-dialogs.rb:41 +#. helptext +#: src/include/partitioning/ep-hd-dialogs.rb:41 msgid "<p>Choose the partition type for the new partition.</p>" msgstr "<p>새 파티션에 대한 파티션 유형을 선택합니다.</p>" -#. radio button text -#: src/include/partitioning/ep-hd-dialogs.rb:63 +#. radio button text +#: src/include/partitioning/ep-hd-dialogs.rb:63 msgid "&Primary Partition" msgstr "주 파티션(&P)" -#. radio button text -#: src/include/partitioning/ep-hd-dialogs.rb:76 +#. radio button text +#: src/include/partitioning/ep-hd-dialogs.rb:76 msgid "&Extended Partition" msgstr "확장 파티션(&E)" -#. radio button text -#: src/include/partitioning/ep-hd-dialogs.rb:89 +#. radio button text +#: src/include/partitioning/ep-hd-dialogs.rb:89 msgid "&Logical Partition" msgstr "논리적 파티션(&L)" -#. heading for a frame in a dialog -#: src/include/partitioning/ep-hd-dialogs.rb:99 +#. heading for a frame in a dialog +#: src/include/partitioning/ep-hd-dialogs.rb:99 msgid "New Partition Type" msgstr "새 파티션 유형" -#. helptext -#: src/include/partitioning/ep-hd-dialogs.rb:166 +#. helptext +#: src/include/partitioning/ep-hd-dialogs.rb:166 msgid "<p>Choose the size for the new partition.</p>" msgstr "<p>새 파티션의 크기를 선택합니다.</p>" -#. frame heading -#: src/include/partitioning/ep-hd-dialogs.rb:232 +#. frame heading +#: src/include/partitioning/ep-hd-dialogs.rb:232 msgid "New Partition Size" msgstr "새 파티션 크기" -#. radio button text -#: src/include/partitioning/ep-hd-dialogs.rb:265 +#. radio button text +#: src/include/partitioning/ep-hd-dialogs.rb:265 msgid "Custom Region" msgstr "사용자 지정 영역" -#: src/include/partitioning/ep-hd-dialogs.rb:272 +#: src/include/partitioning/ep-hd-dialogs.rb:272 msgid "Start Cylinder" msgstr "시작 실린더" -#: src/include/partitioning/ep-hd-dialogs.rb:282 +#: src/include/partitioning/ep-hd-dialogs.rb:282 msgid "End Cylinder" msgstr "끝 실린더" -#. error popup -#: src/include/partitioning/ep-hd-dialogs.rb:380 +#. error popup +#: src/include/partitioning/ep-hd-dialogs.rb:380 msgid "The region entered is invalid." msgstr "입력한 영역이 잘못되었습니다." -#. dialog title -#: src/include/partitioning/ep-hd-dialogs.rb:549 +#. dialog title +#: src/include/partitioning/ep-hd-dialogs.rb:549 msgid "Add Partition on %1" msgstr "%1에 파티션 추가" -#. dialog title -#: src/include/partitioning/ep-hd-dialogs.rb:595 +#. dialog title +#: src/include/partitioning/ep-hd-dialogs.rb:595 msgid "Edit Partition %1" msgstr "%1 파티션 편집" -#. error popup text, %1 is replace with name of partition -#: src/include/partitioning/ep-hd-dialogs.rb:628 +#. error popup text, %1 is replace with name of partition +#: src/include/partitioning/ep-hd-dialogs.rb:628 msgid "No space to moved partition %1." msgstr "파티션 %1을(를) 이동할 공간이 없습니다." -#. popup text, %1 is replace with name of partition -#: src/include/partitioning/ep-hd-dialogs.rb:638 +#. popup text, %1 is replace with name of partition +#: src/include/partitioning/ep-hd-dialogs.rb:638 msgid "Move partition %1 forward?" msgstr "파티션 %1을(를) 앞으로 이동하시겠습니까?" -#. popup text, %1 is replace with name of partition -#: src/include/partitioning/ep-hd-dialogs.rb:647 +#. popup text, %1 is replace with name of partition +#: src/include/partitioning/ep-hd-dialogs.rb:647 msgid "Move partition %1 backward?" msgstr "파티션 %1을(를) 뒤로 이동하시겠습니까?" -#. popup text, %1 is replace with name of partition -#: src/include/partitioning/ep-hd-dialogs.rb:666 +#. popup text, %1 is replace with name of partition +#: src/include/partitioning/ep-hd-dialogs.rb:666 msgid "Move partition %1?" msgstr "파티션 %1을(를) 이동하시겠습니까?" -#. radio button text -#: src/include/partitioning/ep-hd-dialogs.rb:668 +#. radio button text +#: src/include/partitioning/ep-hd-dialogs.rb:668 msgid "Forward" msgstr "앞으로" -#. radio button text -#: src/include/partitioning/ep-hd-dialogs.rb:670 +#. radio button text +#: src/include/partitioning/ep-hd-dialogs.rb:670 msgid "Backward" msgstr "뒤로" -#: src/include/partitioning/ep-hd-dialogs.rb:726 +#: src/include/partitioning/ep-hd-dialogs.rb:726 msgid "Confirm Deleting of All Partitions" msgstr "모든 파티션의 삭제 확인" -#: src/include/partitioning/ep-hd-dialogs.rb:728 +#: src/include/partitioning/ep-hd-dialogs.rb:728 msgid "" "The disk \"%1\" contains at least one partition.\n" "If you proceed, the following partitions will be deleted:" @@ -3246,83 +3205,82 @@ "\"%1\" 디스크에 하나 이상의 파티션이 있습니다.\n" "계속하면 다음 파티션이 삭제됩니다." -#: src/include/partitioning/ep-hd-dialogs.rb:733 +#: src/include/partitioning/ep-hd-dialogs.rb:733 msgid "Really delete all partitions on \"%1\"?" msgstr "\"%1\"의 모든 파티션을 삭제하시겠습니까?" -#. error popup -#. error popup -#: src/include/partitioning/ep-hd-lib.rb:42 -#: src/include/partitioning/ep-hd-lib.rb:251 +#. error popup +#. error popup +#: src/include/partitioning/ep-hd-lib.rb:42 +#: src/include/partitioning/ep-hd-lib.rb:251 msgid "No hard disk selected." msgstr "하드 디스크를 선택하지 않았습니다." -#. error popup -#: src/include/partitioning/ep-hd-lib.rb:51 +#. error popup +#: src/include/partitioning/ep-hd-lib.rb:51 msgid "Cannot create partition table on LDL formatted DASD." msgstr "LDL로 포맷된 DASD에서 파티션 테이블을 생성할 수 없습니다." -#. error popup -#. TRANSLATORS: error popup -#: src/include/partitioning/ep-hd-lib.rb:57 src/modules/Storage.rb:5226 +#. error popup +#. TRANSLATORS: error popup +#: src/include/partitioning/ep-hd-lib.rb:57 src/modules/Storage.rb:5226 msgid "The disk is in use and cannot be modified." msgstr "디스크가 사용 중이어서 수정할 수 없습니다." -#. dialog heading -#: src/include/partitioning/ep-hd-lib.rb:92 +#. dialog heading +#: src/include/partitioning/ep-hd-lib.rb:92 msgid "Select new partition table type for %1." msgstr "%1에 대한 새 파티션 테이블 유형을 선택합니다." -#. popup text, %1 is be replaced by disk name e.g. /dev/sda -#: src/include/partitioning/ep-hd-lib.rb:117 +#. popup text, %1 is be replaced by disk name e.g. /dev/sda +#: src/include/partitioning/ep-hd-lib.rb:117 msgid "" "Really create new partition table on %1? This will delete all data\n" "on %1 and all RAIDs and Volume Groups using partitions on %1." msgstr "" "%1에 대한 새 파티션 테이블을 생성하시겠습니까? 그러면\n" -"%1에 대한 모든 데이터와 %1에서 파티션을 사용하는 모든 RAID 및 볼륨 그룹이 삭" -"제됩니다." +"%1에 대한 모든 데이터와 %1에서 파티션을 사용하는 모든 RAID 및 볼륨 그룹이 삭제됩니다." -#. error popup -#: src/include/partitioning/ep-hd-lib.rb:137 +#. error popup +#: src/include/partitioning/ep-hd-lib.rb:137 msgid "No disk selected." msgstr "디스크를 선택하지 않았습니다." -#. popup text -#. Must be called before removing device. -#: src/include/partitioning/ep-hd-lib.rb:151 -#: src/include/partitioning/ep-lib.rb:202 +#. popup text +#. Must be called before removing device. +#: src/include/partitioning/ep-hd-lib.rb:151 +#: src/include/partitioning/ep-lib.rb:202 msgid "Really delete BIOS RAID %1?" msgstr "BIOS RAID %1을(를) 삭제하시겠습니까?" -#. popup text -#: src/include/partitioning/ep-hd-lib.rb:165 +#. popup text +#: src/include/partitioning/ep-hd-lib.rb:165 msgid "Really delete Partitioned RAID %1?" msgstr "파티셔닝된 RAID %1을(를) 삭제하시겠습니까?" -#. error ppup -#: src/include/partitioning/ep-hd-lib.rb:182 +#. error ppup +#: src/include/partitioning/ep-hd-lib.rb:182 msgid "There are no partitions to delete on this disk." msgstr "이 디스크에는 삭제할 파티션이 없습니다." -#. error popup -#: src/include/partitioning/ep-hd-lib.rb:235 +#. error popup +#: src/include/partitioning/ep-hd-lib.rb:235 msgid "It is not possible to create a partition on %1." msgstr "%1에 파티션을 생성할 수 없습니다." -#. error popup -#. error popup -#. error popup -#. error popup -#: src/include/partitioning/ep-hd-lib.rb:327 -#: src/include/partitioning/ep-hd-lib.rb:376 -#: src/include/partitioning/ep-hd-lib.rb:432 -#: src/include/partitioning/ep-hd-lib.rb:489 +#. error popup +#. error popup +#. error popup +#. error popup +#: src/include/partitioning/ep-hd-lib.rb:327 +#: src/include/partitioning/ep-hd-lib.rb:376 +#: src/include/partitioning/ep-hd-lib.rb:432 +#: src/include/partitioning/ep-hd-lib.rb:489 msgid "No partition selected." msgstr "파티션을 선택하지 않았습니다." -#. error popup, %1 is replace by partition device name e.g. /dev/sdb1 -#: src/include/partitioning/ep-hd-lib.rb:340 +#. error popup, %1 is replace by partition device name e.g. /dev/sdb1 +#: src/include/partitioning/ep-hd-lib.rb:340 msgid "" "The partition %1 is in use. It cannot be\n" "edited. To edit %1, make sure it is not used." @@ -3330,13 +3288,13 @@ "파티션 %1이(가) 사용 중이어서\n" "편집할 수 없습니다. %1을(를) 편집하려면 사용되지 않도록 합니다." -#. error popup text -#: src/include/partitioning/ep-hd-lib.rb:351 +#. error popup text +#: src/include/partitioning/ep-hd-lib.rb:351 msgid "An extended partition cannot be edited." msgstr "확장 파티션을 편집할 수 없습니다." -#. error popup, %1 is replace by partition device name, e.g. /dev/sdb1 -#: src/include/partitioning/ep-hd-lib.rb:393 +#. error popup, %1 is replace by partition device name, e.g. /dev/sdb1 +#: src/include/partitioning/ep-hd-lib.rb:393 msgid "" "The partition %1 is already created on disk\n" "and cannot be moved." @@ -3344,13 +3302,13 @@ "파티션 %1이(가) 이미 디스크에 생성되어 있으며\n" "이동할 수 없습니다." -#. error popup text -#: src/include/partitioning/ep-hd-lib.rb:404 +#. error popup text +#: src/include/partitioning/ep-hd-lib.rb:404 msgid "An extended partition cannot be moved." msgstr "확장된 파티션을 이동할 수 없습니다." -#. error popup, %1 is replace by partition device name, e.g. /dev/sdb1 -#: src/include/partitioning/ep-hd-lib.rb:449 +#. error popup, %1 is replace by partition device name, e.g. /dev/sdb1 +#: src/include/partitioning/ep-hd-lib.rb:449 msgid "" "The partition %1 is in use. It cannot be\n" "resized. To resize %1, make sure it is not used." @@ -3358,13 +3316,13 @@ "파티션 %1이(가) 사용 중이어서\n" "크기를 조정할 수 없습니다. %1의 크기를 조정하려면 사용되지 않도록 합니다." -#. error popup text -#: src/include/partitioning/ep-hd-lib.rb:460 +#. error popup text +#: src/include/partitioning/ep-hd-lib.rb:460 msgid "An extended partition cannot be resized." msgstr "확장 파티션의 크기를 조정할 수 있습니다." -#. helptext -#: src/include/partitioning/ep-hd-lib.rb:533 +#. helptext +#: src/include/partitioning/ep-hd-lib.rb:533 msgid "" "<p>Select one or more (if available) hard disks\n" "that will have the same partition layout as\n" @@ -3380,7 +3338,7 @@ "파티션이 있습니다. 이러한 파티션은\n" "복제된 후에 삭제됩니다.</p>\n" -#: src/include/partitioning/ep-hd-lib.rb:579 +#: src/include/partitioning/ep-hd-lib.rb:579 msgid "" "The following partitions will be deleted\n" "and all data on them will be lost:" @@ -3388,11 +3346,11 @@ "다음 파티션이 삭제되고\n" "모든 데이터가 손실됩니다." -#: src/include/partitioning/ep-hd-lib.rb:586 +#: src/include/partitioning/ep-hd-lib.rb:586 msgid "Really delete these partitions?" msgstr "이 파티션을 삭제하시겠습니까?" -#: src/include/partitioning/ep-hd-lib.rb:602 +#: src/include/partitioning/ep-hd-lib.rb:602 msgid "" "There are no partitions on this disk, but a clonable\n" "disk must have at least one partition.\n" @@ -3402,7 +3360,7 @@ "디스크에는 하나 이상의 파티션이 있어야 합니다.\n" "디스크를 복제하기 전에 파티션을 생성하십시오.\n" -#: src/include/partitioning/ep-hd-lib.rb:615 +#: src/include/partitioning/ep-hd-lib.rb:615 msgid "" "This disk cannot be cloned. There are no suitable\n" "disks that could have the same partitioning layout." @@ -3410,20 +3368,20 @@ "이 디스크를 복제할 수 없습니다. 동일한 파티션\n" "레이아웃을 가질 수 있는 적합한 디스크가 없습니다." -#: src/include/partitioning/ep-hd-lib.rb:644 +#: src/include/partitioning/ep-hd-lib.rb:644 msgid "Clone partition layout of %1" msgstr "%1의 파티션 레이아웃 복제" -#: src/include/partitioning/ep-hd-lib.rb:648 +#: src/include/partitioning/ep-hd-lib.rb:648 msgid "Available target disks:" msgstr "사용 가능한 대상 디스크:" -#: src/include/partitioning/ep-hd-lib.rb:676 +#: src/include/partitioning/ep-hd-lib.rb:676 msgid "Select a target disk for creating a clone" msgstr "복제를 생성하기 위한 대상 디스크 선택" -#. popup text, %1 is replaced by a dasd name e.g. /dev/dasda -#: src/include/partitioning/ep-hd-lib.rb:757 +#. popup text, %1 is replaced by a dasd name e.g. /dev/dasda +#: src/include/partitioning/ep-hd-lib.rb:757 msgid "" "Running dasdfmt deletes all data on the disk.\n" "Really execute dasdfmt on disk %1?\n" @@ -3431,8 +3389,8 @@ "dasdfmt를 실행하면 디스크의 모든 데이터가 삭제됩니다.\n" "%1 디스크에서 dasdfmt를 실행하시겠습니까?\n" -#. popup text -#: src/include/partitioning/ep-hd-lib.rb:768 +#. popup text +#: src/include/partitioning/ep-hd-lib.rb:768 msgid "" "The disk is no longer marked for dasdfmt.\n" "\n" @@ -3444,58 +3402,58 @@ " 현재 이 디스크에 있는 파티션이 다시\n" " 나타납니다.\n" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/ep-hd.rb:41 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/ep-hd.rb:41 msgid "Add Partition" msgstr "파티션 추가" -#: src/include/partitioning/ep-hd.rb:62 +#: src/include/partitioning/ep-hd.rb:62 msgid "Move" msgstr "이동" -#: src/include/partitioning/ep-hd.rb:63 src/include/partitioning/ep-lvm.rb:43 -#: src/include/partitioning/ep-lvm.rb:65 -#: src/include/partitioning/ep-raid.rb:39 +#: src/include/partitioning/ep-hd.rb:63 src/include/partitioning/ep-lvm.rb:43 +#: src/include/partitioning/ep-lvm.rb:65 +#: src/include/partitioning/ep-raid.rb:39 msgid "Resize" msgstr "크기 조정" -#. push button text -#: src/include/partitioning/ep-hd.rb:88 +#. push button text +#: src/include/partitioning/ep-hd.rb:88 msgid "Move..." msgstr "이동..." -#. push button text -#. push button text -#. push button text -#: src/include/partitioning/ep-hd.rb:90 src/include/partitioning/ep-lvm.rb:88 -#: src/include/partitioning/ep-raid.rb:61 +#. push button text +#. push button text +#. push button text +#: src/include/partitioning/ep-hd.rb:90 src/include/partitioning/ep-lvm.rb:88 +#: src/include/partitioning/ep-raid.rb:61 msgid "Resize..." msgstr "크기 조정..." -#. error popup -#: src/include/partitioning/ep-hd.rb:132 +#. error popup +#: src/include/partitioning/ep-hd.rb:132 msgid "" "Hard disks, BIOS RAIDs and multipath\n" "devices cannot be moved." @@ -3503,8 +3461,8 @@ "하드 디스크, BIOS RAID 및 다중 경로\n" "장치는 이동할 수 없습니다." -#. error popup -#: src/include/partitioning/ep-hd.rb:143 +#. error popup +#: src/include/partitioning/ep-hd.rb:143 msgid "" "Hard disks, BIOS RAIDs and multipath\n" "devices cannot be resized." @@ -3512,19 +3470,19 @@ "하드 디스크, BIOS RAID 및 다중 경로\n" "장치는 크기를 조정할 수 없습니다." -#. heading -#. tree node label -#: src/include/partitioning/ep-hd.rb:210 -#: src/include/partitioning/ep-main.rb:374 +#. heading +#. tree node label +#: src/include/partitioning/ep-hd.rb:210 +#: src/include/partitioning/ep-main.rb:374 msgid "Hard Disks" msgstr "하드 디스크" -#: src/include/partitioning/ep-hd.rb:220 +#: src/include/partitioning/ep-hd.rb:220 msgid "Add Partition..." msgstr "파티션 추가..." -#. helptext -#: src/include/partitioning/ep-hd.rb:231 +#. helptext +#: src/include/partitioning/ep-hd.rb:231 msgid "" "<p>This view shows all hard disks including\n" "iSCSI disks, BIOS RAIDs and multipath disks and their partitions.</p>\n" @@ -3532,18 +3490,18 @@ "<p>이 보기는 iSCSI 디스크, BIOS RAID, 다중 경로 디스크 및 파티션을 포함하여\n" "모든 하드 디스크를 표시합니다.</p>\n" -#. push button text (do not translate 'SMART', it is the name of the tool) -#: src/include/partitioning/ep-hd.rb:320 +#. push button text (do not translate 'SMART', it is the name of the tool) +#: src/include/partitioning/ep-hd.rb:320 msgid "Health Test (SMART)..." msgstr "상태 테스트(SMART)..." -#. push button text (do not translate 'hdparm', it is the name of the tool) -#: src/include/partitioning/ep-hd.rb:331 +#. push button text (do not translate 'hdparm', it is the name of the tool) +#: src/include/partitioning/ep-hd.rb:331 msgid "Properties (hdparm)..." msgstr "속성(hdparm)..." -#. helptext -#: src/include/partitioning/ep-hd.rb:345 +#. helptext +#: src/include/partitioning/ep-hd.rb:345 msgid "" "<p>This view shows detailed information about the\n" "selected hard disk.</p>" @@ -3551,56 +3509,55 @@ "<p>이 보기는 선택한 하드 디스크에 대한\n" "세부 정보를 보여 줍니다.</p>" -#: src/include/partitioning/ep-hd.rb:393 +#: src/include/partitioning/ep-hd.rb:393 msgid "SMART is not available for this disk." msgstr "이 디스크에 SMART를 사용할 수 없습니다." -#: src/include/partitioning/ep-hd.rb:401 +#: src/include/partitioning/ep-hd.rb:401 msgid "hdparm is not available for this disk." msgstr "이 디스크에 hdparm을 사용할 수 없습니다." -#. menu entry text -#: src/include/partitioning/ep-hd.rb:458 +#. menu entry text +#: src/include/partitioning/ep-hd.rb:458 msgid "Create New Partition Table" msgstr "새 파티션 테이블 생성" -#. menu entry text -#: src/include/partitioning/ep-hd.rb:467 +#. menu entry text +#: src/include/partitioning/ep-hd.rb:467 msgid "Clone this Disk" msgstr "이 디스크 복제" -#. menu entry text -#: src/include/partitioning/ep-hd.rb:477 +#. menu entry text +#: src/include/partitioning/ep-hd.rb:477 msgid "Execute dasd&fmt on the DASD Device" msgstr "DASD장치에서 dasdfmt를 실행하십시오.(&F)" -#. push button text -#. push button text -#: src/include/partitioning/ep-hd.rb:496 -#: src/include/partitioning/ep-lvm.rb:213 -#: src/include/partitioning/ep-lvm.rb:337 -#: src/include/partitioning/ep-tmpfs.rb:110 +#. push button text +#. push button text +#: src/include/partitioning/ep-hd.rb:496 +#: src/include/partitioning/ep-lvm.rb:213 +#: src/include/partitioning/ep-lvm.rb:337 +#: src/include/partitioning/ep-tmpfs.rb:110 msgid "Add..." msgstr "추가..." -#. menu button text -#: src/include/partitioning/ep-hd.rb:501 +#. menu button text +#: src/include/partitioning/ep-hd.rb:501 msgid "Expert..." msgstr "고급..." -#. helptext -#: src/include/partitioning/ep-hd.rb:511 +#. helptext +#: src/include/partitioning/ep-hd.rb:511 msgid "" "<p>This view shows all partitions of the selected\n" "hard disk. If the hard disk is used by e.g. BIOS RAID or multipath, no\n" "partitions are shown here.</p>\n" msgstr "" "<p>이 보기는 선택한 하드 디스크의\n" -"모든 파티션을 표시합니다. 하드 디스크가 BIOS RAID 또는 다중 경로 등에서 사용" -"된 경우 여기에 파티션이 표시되지 않습니다.</p>\n" +"모든 파티션을 표시합니다. 하드 디스크가 BIOS RAID 또는 다중 경로 등에서 사용된 경우 여기에 파티션이 표시되지 않습니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-hd.rb:596 +#. helptext +#: src/include/partitioning/ep-hd.rb:596 msgid "" "<p>This view shows all devices used by the\n" "selected hard disk. The view is only available for BIOS RAIDs, partitioned\n" @@ -3610,23 +3567,23 @@ "모든 장치를 표시합니다. 이 보기는 BIOS RAID, 파티션된 소프트웨어\n" "RAID 및 다중 경로 디스크에만 사용할 수 있습니다.</p>\n" -#. tab heading -#: src/include/partitioning/ep-hd.rb:646 +#. tab heading +#: src/include/partitioning/ep-hd.rb:646 msgid "&Partitions" msgstr "파티션(&P)" -#. heading -#: src/include/partitioning/ep-hd.rb:661 +#. heading +#: src/include/partitioning/ep-hd.rb:661 msgid "Hard Disk: %1" msgstr "하드 디스크: %1" -#. heading -#: src/include/partitioning/ep-hd.rb:721 +#. heading +#: src/include/partitioning/ep-hd.rb:721 msgid "Partition: %1" msgstr "파티션: %1" -#. helptext -#: src/include/partitioning/ep-hd.rb:731 +#. helptext +#: src/include/partitioning/ep-hd.rb:731 msgid "" "<p>This view shows detailed information about the\n" "selected partition.</p>" @@ -3634,8 +3591,8 @@ "<p>이 보기는 선택한 파티션에 대한\n" "세부 정보를 보여 줍니다.</p>" -#. help text, richtext format -#: src/include/partitioning/ep-import.rb:296 +#. help text, richtext format +#: src/include/partitioning/ep-import.rb:296 msgid "" "<p>YaST has scanned your hard disks and found one or several existing \n" "Linux systems with mount points. The old mount points are shown in \n" @@ -3645,8 +3602,8 @@ "여러 개의 Linux 시스템이 발견되었습니다. 이전 마운트 포인트가\n" "테이블에 표시되었습니다.</p>\n" -#. help text, richtext format -#: src/include/partitioning/ep-import.rb:305 +#. help text, richtext format +#: src/include/partitioning/ep-import.rb:305 msgid "" "<p>You can choose whether the existing system\n" "volumes, e.g. / and /usr, will be formatted during the\n" @@ -3656,49 +3613,49 @@ "포맷 여부를 선택할 수\n" "있습니다. 비시스템 볼륨(예: /home)은 포맷되지 않습니다.</p>" -#. popup text -#: src/include/partitioning/ep-import.rb:328 +#. popup text +#: src/include/partitioning/ep-import.rb:328 msgid "No previous system with mount points was detected." msgstr "마운트 포인트에 있는 이전 시스템을 찾을 수 없습니다." -#: src/include/partitioning/ep-import.rb:343 +#: src/include/partitioning/ep-import.rb:343 msgid "Show &Previous" msgstr "이전 보기(&P)" -#: src/include/partitioning/ep-import.rb:344 +#: src/include/partitioning/ep-import.rb:344 msgid "Show &Next" msgstr "다음 보기(&N)" -#. dialog heading -#: src/include/partitioning/ep-import.rb:353 +#. dialog heading +#: src/include/partitioning/ep-import.rb:353 msgid "Import Mount Points from Existing System:" msgstr "기존 시스템에서 마운트 포인트 임포트:" -#. checkbox label -#: src/include/partitioning/ep-import.rb:368 +#. checkbox label +#: src/include/partitioning/ep-import.rb:368 msgid "Format System Volumes" msgstr "시스템 볼륨 포맷" -#. pushbutton label -#: src/include/partitioning/ep-import.rb:374 +#. pushbutton label +#: src/include/partitioning/ep-import.rb:374 msgid "Import" msgstr "임포트" -#. popup text %1 is replaced by a device name (e.g. /dev/hda1) -#: src/include/partitioning/ep-import.rb:400 +#. popup text %1 is replaced by a device name (e.g. /dev/hda1) +#: src/include/partitioning/ep-import.rb:400 msgid "/etc/fstab found on %1 contains:" msgstr "%1에서 검색된 /etc/fstab의 포함 내용:" -#: src/include/partitioning/ep-import.rb:499 +#: src/include/partitioning/ep-import.rb:499 msgid "Wrong Password Provided." msgstr "잘못된 비밀번호를 제공했습니다." -#. Must be called before removing device. -#: src/include/partitioning/ep-lib.rb:110 +#. Must be called before removing device. +#: src/include/partitioning/ep-lib.rb:110 msgid "Confirm Deleting Partition Used by LVM" msgstr "LVM에서 사용된 파티션 삭제 확인" -#: src/include/partitioning/ep-lib.rb:112 +#: src/include/partitioning/ep-lib.rb:112 msgid "" "The selected partition is used by volume group \"%1\".\n" "To keep the system in a consistent state, the following volume group\n" @@ -3708,15 +3665,15 @@ "시스템을 일관된 상태로 유지하기 위해 다음 볼륨 그룹과\n" "논리 볼륨이 삭제됩니다.\n" -#: src/include/partitioning/ep-lib.rb:120 +#: src/include/partitioning/ep-lib.rb:120 msgid "Delete partition \"%1\" and volume group \"%2\" now?" msgstr "지금 \"%1\" 파티션과 \"%2\" 볼륨 그룹을 삭제하시겠습니까?" -#: src/include/partitioning/ep-lib.rb:130 +#: src/include/partitioning/ep-lib.rb:130 msgid "Confirm Deleting Partition Used by RAID" msgstr "RAID에서 사용된 파티션 삭제 확인" -#: src/include/partitioning/ep-lib.rb:132 +#: src/include/partitioning/ep-lib.rb:132 msgid "" "The selected partition belongs to RAID \"%1\".\n" "To keep the system in a consistent state, the following\n" @@ -3726,24 +3683,24 @@ "시스템을 일관된 상태로 유지하기 위해 다음\n" "RAID 장치가 삭제됩니다.\n" -#: src/include/partitioning/ep-lib.rb:140 +#: src/include/partitioning/ep-lib.rb:140 msgid "Delete partition \"%1\" and RAID \"%2\" now?" msgstr "지금 \"%1\" 파티션과 RAID \"%2\"을(를) 삭제하시겠습니까?" -#. YesNo popup text %1 is replaced by a disk name e.g. /dev/hda -#: src/include/partitioning/ep-lib.rb:210 +#. YesNo popup text %1 is replaced by a disk name e.g. /dev/hda +#: src/include/partitioning/ep-lib.rb:210 msgid "Really delete all partitions on %1?" msgstr "%1의 모든 파티션을 삭제하시겠습니까?" -#. /////////////////////////////////////////////////// -#. now delete partition!! -#. YesNo popup text, %1 is replaced by a device name e.g. /dev/hda1 -#: src/include/partitioning/ep-lib.rb:262 +#. /////////////////////////////////////////////////// +#. now delete partition!! +#. YesNo popup text, %1 is replaced by a device name e.g. /dev/hda1 +#: src/include/partitioning/ep-lib.rb:262 msgid "Really delete %1?" msgstr "%1을(를) 삭제하시겠습니까?" -#. YesNo popup. %1 is path to a file -#: src/include/partitioning/ep-lib.rb:276 +#. YesNo popup. %1 is path to a file +#: src/include/partitioning/ep-lib.rb:276 msgid "" "\n" "Should the loop file %1 also be removed?\n" @@ -3751,60 +3708,58 @@ "\n" "%1 루프 파일 또한 제거해도 됩니까?\n" -#. Guarantee some minimal share (1%) of total graph width to the segment. -#. Prevents small partitions e.g. swaps from disappearing completely. -#: src/include/partitioning/ep-lib.rb:358 +#. Guarantee some minimal share (1%) of total graph width to the segment. +#. Prevents small partitions e.g. swaps from disappearing completely. +#: src/include/partitioning/ep-lib.rb:358 msgid "Unpartitioned" msgstr "파티션되지 않음" -#. Now there is some xtra space between the end of this partition and the start of the next one -#. or the end of the disk if -#. 1. end +1th cyl is not the next one -#. 2. end cyl is not the same as the next one (yeah, partitions may share a cylinder) -#: src/include/partitioning/ep-lib.rb:461 +#. Now there is some xtra space between the end of this partition and the start of the next one +#. or the end of the disk if +#. 1. end +1th cyl is not the next one +#. 2. end cyl is not the same as the next one (yeah, partitions may share a cylinder) +#: src/include/partitioning/ep-lib.rb:461 msgid "Unallocated" msgstr "할당되지 않음" -#: src/include/partitioning/ep-lib.rb:500 +#: src/include/partitioning/ep-lib.rb:500 msgid "<p>No changes to partitioning.</p>" msgstr "<p>파티션 변경 사항이 없습니다.</p>" -#: src/include/partitioning/ep-lib.rb:502 +#: src/include/partitioning/ep-lib.rb:502 msgid "<p>Changes to partitioning:</p>" msgstr "<p>파티션 변경 사항:</p>" -#: src/include/partitioning/ep-lib.rb:505 +#: src/include/partitioning/ep-lib.rb:505 msgid "<p>No changes to storage settings.</p>" msgstr "<p>저장소 설정 변경 사항이 없습니다.</p>" -#: src/include/partitioning/ep-lib.rb:507 +#: src/include/partitioning/ep-lib.rb:507 msgid "<p>Storage settings:</p>" msgstr "<p>저장소 설정:</p>" -#: src/include/partitioning/ep-lib.rb:516 +#: src/include/partitioning/ep-lib.rb:516 msgid "<p>Packages to install:</p>" msgstr "<p>설치할 패키지:</p>" -#: src/include/partitioning/ep-lib.rb:518 +#: src/include/partitioning/ep-lib.rb:518 msgid "<p>No packages need to be installed.</p>" msgstr "<p>패키지를 설치할 필요가 없습니다.</p>" -#. TODO -#. helptext -#: src/include/partitioning/ep-loop-dialogs.rb:36 +#. TODO +#. helptext +#: src/include/partitioning/ep-loop-dialogs.rb:36 msgid "" "\n" -"<p><b>Path Name of Loop File:</b><br>This must be an absolute path to the " -"file\n" +"<p><b>Path Name of Loop File:</b><br>This must be an absolute path to the file\n" "containing the data for the encrypted loop device to set up.</p>\n" msgstr "" "\n" -"<p><b>루프 파일의 경로 이름:</b><br>암호화된 루프 장치를 설치하기 위한 데이터" -"를\n" +"<p><b>루프 파일의 경로 이름:</b><br>암호화된 루프 장치를 설치하기 위한 데이터를\n" "포함하는 파일에 대한 절대 경로여야 합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-loop-dialogs.rb:45 +#. helptext +#: src/include/partitioning/ep-loop-dialogs.rb:45 msgid "" "\n" "<p><b>Create Loop File:</b><br>If this is checked, the file will be created\n" @@ -3816,8 +3771,8 @@ "지정한 크기로 파일이 생성됩니다.<b>참고:</b> 파일이\n" "이미 있는 경우 파일 내의 모든 데이터는 손실됩니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-loop-dialogs.rb:56 +#. helptext +#: src/include/partitioning/ep-loop-dialogs.rb:56 msgid "" "\n" "<p><b>Size:</b><br>This is the size of the loop file. The file system\n" @@ -3827,8 +3782,8 @@ "<p><b>크기:</b><br>루프 파일의 크기입니다. 암호화된 루프\n" "장치에 이 크기로 파일 시스템이 생성됩니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-loop-dialogs.rb:66 +#. helptext +#: src/include/partitioning/ep-loop-dialogs.rb:66 msgid "" "\n" "<p><b>NOTE:</b> During installation, YaST cannot carry out consistency\n" @@ -3842,23 +3797,23 @@ "없습니다. 파일 시스템은 설치가 끝난 후 생성됩니다.\n" "파일 크기와 경로 이름을 입력할 때 주의하십시오.</p>\n" -#. input field label -#: src/include/partitioning/ep-loop-dialogs.rb:96 +#. input field label +#: src/include/partitioning/ep-loop-dialogs.rb:96 msgid "Path Name of Loop File" msgstr "루프 파일의 경로 이름" -#. push button text -#: src/include/partitioning/ep-loop-dialogs.rb:103 +#. push button text +#: src/include/partitioning/ep-loop-dialogs.rb:103 msgid "Browse..." msgstr "찾아보기..." -#. check box text -#: src/include/partitioning/ep-loop-dialogs.rb:111 +#. check box text +#: src/include/partitioning/ep-loop-dialogs.rb:111 msgid "Create Loop File" msgstr "루프 파일 생성" -#. popup text -#: src/include/partitioning/ep-loop-dialogs.rb:162 +#. popup text +#: src/include/partitioning/ep-loop-dialogs.rb:162 msgid "" "The file name \"%1\" is invalid.\n" "Use an absolute path name.\n" @@ -3866,13 +3821,13 @@ "파일 이름 \"%1\"이(가) 잘못되었습니다.\n" "절대 경로 이름을 사용하십시오.\n" -#. error popup, %1 is replaced by size -#: src/include/partitioning/ep-loop-dialogs.rb:188 +#. error popup, %1 is replaced by size +#: src/include/partitioning/ep-loop-dialogs.rb:188 msgid "The size entered is invalid. Enter a size of at least %1." msgstr "입력한 크기가 잘못되었습니다. 크기를 %1 이상으로 입력하십시오." -#. popup text -#: src/include/partitioning/ep-loop-dialogs.rb:206 +#. popup text +#: src/include/partitioning/ep-loop-dialogs.rb:206 msgid "" "The file name \"%1\" does not exist\n" "and the flag for create is off. Either use an existing file or activate\n" @@ -3882,47 +3837,47 @@ "생성 플래그가 해제되어 있습니다. 기존 파일을 사용하거나 생성 플래그를\n" "활성화하십시오." -#. dialog title -#: src/include/partitioning/ep-loop-dialogs.rb:282 +#. dialog title +#: src/include/partitioning/ep-loop-dialogs.rb:282 msgid "Add Crypt File" msgstr "암호화된 파일 추가" -#. dialog title -#: src/include/partitioning/ep-loop-dialogs.rb:326 +#. dialog title +#: src/include/partitioning/ep-loop-dialogs.rb:326 msgid "Edit Crypt File %1" msgstr "암호화된 파일 %1 편집" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#. error popup -#: src/include/partitioning/ep-loop-lib.rb:66 -#: src/include/partitioning/ep-loop-lib.rb:107 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#. error popup +#: src/include/partitioning/ep-loop-lib.rb:66 +#: src/include/partitioning/ep-loop-lib.rb:107 msgid "No crypt file selected." msgstr "암호화된 파일을 선택하지 않았습니다." -#. error popup, %1 is replaced by device name -#: src/include/partitioning/ep-loop-lib.rb:77 +#. error popup, %1 is replaced by device name +#: src/include/partitioning/ep-loop-lib.rb:77 msgid "" "The Crypt File %1 is in use. It cannot be\n" "edited. To edit %1, make sure it is not used." @@ -3930,30 +3885,30 @@ "암호화된 파일 %1이(가) 사용 중이어서\n" "편집할 수 없습니다. %1을(를) 편집하려면 사용되지 않도록 합니다." -#. heading -#. tree node label -#: src/include/partitioning/ep-loop.rb:103 -#: src/include/partitioning/ep-main.rb:398 +#. heading +#. tree node label +#: src/include/partitioning/ep-loop.rb:103 +#: src/include/partitioning/ep-main.rb:398 msgid "Crypt Files" msgstr "암호화된 파일" -#. push button text -#: src/include/partitioning/ep-loop.rb:112 +#. push button text +#: src/include/partitioning/ep-loop.rb:112 msgid "Add Crypt File..." msgstr "암호화된 파일 추가..." -#. helptext -#: src/include/partitioning/ep-loop.rb:121 +#. helptext +#: src/include/partitioning/ep-loop.rb:121 msgid "<p>This view shows all crypt files.</p>" msgstr "<p>이 보기는 모든 암호화된 파일을 보여 줍니다.</p>" -#. heading -#: src/include/partitioning/ep-loop.rb:172 +#. heading +#: src/include/partitioning/ep-loop.rb:172 msgid "Crypt File: %1" msgstr "암호화된 파일: %1" -#. helptext -#: src/include/partitioning/ep-loop.rb:183 +#. helptext +#: src/include/partitioning/ep-loop.rb:183 msgid "" "<p>This view shows detailed information of the\n" "selected crypt file.</p>" @@ -3961,23 +3916,23 @@ "<p>이 보기는 선택한 암호화된 파일의\n" "세부 정보를 보여 줍니다.</p>" -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:41 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:41 msgid "Enter a name for the volume group." msgstr "볼륨 그룹의 이름을 입력합니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:46 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:46 msgid "The name for the volume group is longer than 128 characters." msgstr "볼륨 그룹의 이름이 128자를 초과합니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:52 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:52 msgid "The name for the volume group must not start with a \"-\"." msgstr "볼륨 그룹의 이름이 \"-\"로 시작하면 안 됩니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:58 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:58 msgid "" "The name for the volume group contains illegal characters. Allowed\n" "are alphanumeric characters, \".\", \"_\", \"-\" and \"+\"." @@ -3985,13 +3940,13 @@ "볼륨 그룹의 이름에 잘못된 문자가 포함되어 있습니다. 허용되는 문자는 \n" "영숫자 문자와 \".\", \"_\", \"-\", \"+\"입니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:76 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:76 msgid "The volume group \"%1\" already exists." msgstr "볼륨 그룹 \"%1\"이(가) 이미 있습니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:85 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:85 msgid "" "The volume group name \"%1\" conflicts\n" "with another entry in the /dev directory.\n" @@ -3999,13 +3954,13 @@ "볼륨 그룹 이름 \"%1\"은(는) /dev\n" "디렉토리의 다른 항목과 충돌됩니다.\n" -#. pop-up dialog title -#: src/include/partitioning/ep-lvm-dialogs.rb:106 +#. pop-up dialog title +#: src/include/partitioning/ep-lvm-dialogs.rb:106 msgid "Confirm Deleting of Volume Group" msgstr "볼륨 그룹의 삭제 확인" -#. pop-up dialog message part 1: %1 is vol.group name -#: src/include/partitioning/ep-lvm-dialogs.rb:109 +#. pop-up dialog message part 1: %1 is vol.group name +#: src/include/partitioning/ep-lvm-dialogs.rb:109 msgid "" "The volume group \"%1\" contains at least one logical volume.\n" "If you proceed, the following volumes will be unmounted (if mounted)\n" @@ -4015,13 +3970,13 @@ "계속하면, 다음 볼륨이 마운트 해제되고(마운트된 경우)\n" "삭제됩니다." -#. pop-up dialog message part 2: %1 is vol.group name -#: src/include/partitioning/ep-lvm-dialogs.rb:118 +#. pop-up dialog message part 2: %1 is vol.group name +#: src/include/partitioning/ep-lvm-dialogs.rb:118 msgid "Really delete volume group \"%1\" and all related logical volumes?" msgstr "\"%1\" 볼륨 그룹과 관련된 모든 논리 볼륨을 삭제하시겠습니까?" -#. error popup, %1, %2 and %3 are replaced by sizes -#: src/include/partitioning/ep-lvm-dialogs.rb:132 +#. error popup, %1, %2 and %3 are replaced by sizes +#: src/include/partitioning/ep-lvm-dialogs.rb:132 msgid "" "The data entered is invalid. Insert a physical extent size larger than %1\n" "in powers of 2, for example, \"%2\" or \"%3\"" @@ -4029,18 +3984,18 @@ "입력한 데이터가 잘못되었습니다. 2의 제곱 값으로 %1보다 큰\n" "물리적인 확장 크기(예: \"%2\" 또는 \"%3\")를 삽입하십시오." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:167 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:167 msgid "Enter a name for the logical volume." msgstr "논리적 볼륨에 대한 이름을 입력합니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:172 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:172 msgid "The name for the logical volume is longer than 128 characters." msgstr "논리적 볼륨에 대한 이름이 128자를 초과합니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:178 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:178 msgid "" "The name for the logical volume contains illegal characters. Allowed\n" "are alphanumeric characters, \".\", \"_\", \"-\" and \"+\"." @@ -4048,8 +4003,8 @@ "논리적 그룹의 이름에 잘못된 문자가 포함되어 있습니다. 허용되는 문자는 \n" "영숫자 문자와 \".\", \"_\", \"-\", \"+\"입니다." -#. error popup text -#: src/include/partitioning/ep-lvm-dialogs.rb:197 +#. error popup text +#: src/include/partitioning/ep-lvm-dialogs.rb:197 msgid "" "A logical volume named \"%1\" already exists\n" "in volume group \"%2\"." @@ -4057,57 +4012,56 @@ "\"%1\"(이)라는 논리적 볼륨이 이미\n" "볼륨 그룹 \"%2\"에 있습니다." -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:238 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:238 msgid "<p>Enter the name and physical extent size of the new volume group.</p>" msgstr "<p>새 볼륨 그룹의 이름과 물리적 확장 크기를 입력합니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:245 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:245 msgid "<p>Select the physical volumes the volume group should contain.</p>" msgstr "<p>볼륨 그룹에서 포함시킬 물리적 볼륨을 선택합니다.</p>" -#. label for input field -#: src/include/partitioning/ep-lvm-dialogs.rb:283 +#. label for input field +#: src/include/partitioning/ep-lvm-dialogs.rb:283 msgid "Volume Group Name" msgstr "볼륨 그룹 이름" -#. label for combo box -#: src/include/partitioning/ep-lvm-dialogs.rb:293 +#. label for combo box +#: src/include/partitioning/ep-lvm-dialogs.rb:293 msgid "&Physical Extent Size" msgstr "물리적인 확장 크기(&P)" -#. label for selection box -#: src/include/partitioning/ep-lvm-dialogs.rb:308 -#: src/include/partitioning/ep-lvm-dialogs.rb:413 +#. label for selection box +#: src/include/partitioning/ep-lvm-dialogs.rb:308 +#: src/include/partitioning/ep-lvm-dialogs.rb:413 msgid "Available Physical Volumes:" msgstr "사용 가능한 물리적 볼륨:" -#. label for selection box -#: src/include/partitioning/ep-lvm-dialogs.rb:310 -#: src/include/partitioning/ep-lvm-dialogs.rb:414 +#. label for selection box +#: src/include/partitioning/ep-lvm-dialogs.rb:310 +#: src/include/partitioning/ep-lvm-dialogs.rb:414 msgid "Selected Physical Volumes:" msgstr "선택한 물리적 볼륨:" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:378 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:378 msgid "<p>Change the devices that are used for the volume group.</p>" msgstr "<p>볼륨 그룹에 사용된 장치를 변경합니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:491 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:491 msgid "" "<p>Enter the size as well as the number and size\n" -"of stripes for the new logical volume. The number of stripes cannot be " -"higher\n" +"of stripes for the new logical volume. The number of stripes cannot be higher\n" "than the number of physical volumes of the volume group.</p>" msgstr "" "<p>새 논리 볼륨의 스트라이프 크기와 수를\n" "입력하십시오. 스트라이프 수는 볼륨 그룹의 실제 볼륨 수보다\n" "높을 수 없습니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:500 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:500 msgid "" "<p>So called <b>Thin Volumes</b> can created\n" "with arbitrary volume size. The space required is taken on demand from the \n" @@ -4123,163 +4077,156 @@ "할당된 씬 풀은 이 공간 요구사항을 충족할 수 있어야 합니다.\n" "씬 볼륨은 스트라이프 수를 가질 수 없습니다." -#. heading for frame -#. Column header -#: src/include/partitioning/ep-lvm-dialogs.rb:598 -#: src/modules/StorageFields.rb:186 +#. heading for frame +#. Column header +#: src/include/partitioning/ep-lvm-dialogs.rb:598 +#: src/modules/StorageFields.rb:186 msgid "Stripes" msgstr "분할" -#. combo box label -#: src/include/partitioning/ep-lvm-dialogs.rb:606 +#. combo box label +#: src/include/partitioning/ep-lvm-dialogs.rb:606 msgid "Number" msgstr "번호" -#. A dialog title - %1 is a logical volume name, %2 is a volume group. -#: src/include/partitioning/ep-lvm-dialogs.rb:631 +#. A dialog title - %1 is a logical volume name, %2 is a volume group. +#: src/include/partitioning/ep-lvm-dialogs.rb:631 msgid "Add Logical volume %1 on %2" msgstr "%2의 %1 논리 볼륨 추가" -#. dialog title -#: src/include/partitioning/ep-lvm-dialogs.rb:756 +#. dialog title +#: src/include/partitioning/ep-lvm-dialogs.rb:756 msgid "Resize Volume Group %1" msgstr "볼륨 그룹 %1 크기 조정" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:774 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:774 msgid "<p>Enter the name of the new logical volume.</p>" msgstr "<p>새 논리적 볼륨의 이름을 입력합니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:778 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:778 msgid "" "<p>You can declare the logical volume as a <b>Normal Volume</b>.\n" -"This is the default and means plain LVM Volumes like all volumes were before " -"the feature of <b>Thin Provisioning</b> existed.\n" +"This is the default and means plain LVM Volumes like all volumes were before the feature of <b>Thin Provisioning</b> existed.\n" "If in doubt this is most probably the right choice</p>" msgstr "" "<p>논리 볼륨을 <b>일반 볼륨</b>으로 선언할 수 있습니다.\n" -"이것은 기본값이며 <b>씬 프로비저닝</b> 기능이 존재하기 전의 모든 볼륨과 마찬" -"가지로 일반 LVM 볼륨을 의미합니다.\n" +"이것은 기본값이며 <b>씬 프로비저닝</b> 기능이 존재하기 전의 모든 볼륨과 마찬가지로 일반 LVM 볼륨을 의미합니다.\n" "이것이 가장 적절한 선택일 수 있습니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:787 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:787 msgid "" "<p>You can declare the logical volume as a <b>Thin Pool</b>.\n" -"This means <b>Thin Volumes</b> allocate their needed space on demand from " -"such a pool.</p>" +"This means <b>Thin Volumes</b> allocate their needed space on demand from such a pool.</p>" msgstr "" "<p>논리 볼륨을 <b>씬 풀</b>로 선언할 수 있습니다.\n" -"이것은 <b>씬 볼륨</b>이 해당 풀에서 요구 시 필요한 공간을 할당함을 의미합니" -"다.</p>" +"이것은 <b>씬 볼륨</b>이 해당 풀에서 요구 시 필요한 공간을 할당함을 의미합니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm-dialogs.rb:794 +#. helptext +#: src/include/partitioning/ep-lvm-dialogs.rb:794 msgid "" "<p>You can declare the logical volume as a <b>Thin Volume</b>.\n" -"This means the volume allocates needed space on demand from a <b>Thin Pool.</p>" +"This means the volume allocates needed space on demand from a <b>Thin Pool</b>.</p>" msgstr "" "<p>논리 볼륨을 <b>씬 볼륨</b>으로 선언할 수 있습니다.\n" "이것은 볼륨이 <b>씬 풀</b>에서 요구 시 필요한 공간을 할당함을 의미합니다.</p>" -#. heading for frame -#: src/include/partitioning/ep-lvm-dialogs.rb:827 +#. heading for frame +#: src/include/partitioning/ep-lvm-dialogs.rb:827 msgid "Name" msgstr "이름" -#: src/include/partitioning/ep-lvm-dialogs.rb:828 -#: src/include/partitioning/ep-lvm.rb:195 +#: src/include/partitioning/ep-lvm-dialogs.rb:828 +#: src/include/partitioning/ep-lvm.rb:195 msgid "Logical Volume" msgstr "논리적 볼륨" -#. heading for frame -#. Column header -#: src/include/partitioning/ep-lvm-dialogs.rb:839 -#: src/modules/StorageFields.rb:132 +#. heading for frame +#. Column header +#: src/include/partitioning/ep-lvm-dialogs.rb:839 +#: src/modules/StorageFields.rb:132 msgid "Type" msgstr "유형" -#. radio button label -#: src/include/partitioning/ep-lvm-dialogs.rb:848 +#. radio button label +#: src/include/partitioning/ep-lvm-dialogs.rb:848 msgid "Normal Volume" msgstr "일반 볼륨" -#. radio button label -#: src/include/partitioning/ep-lvm-dialogs.rb:851 +#. radio button label +#: src/include/partitioning/ep-lvm-dialogs.rb:851 msgid "Thin Pool" msgstr "씬 풀" -#. radio button label -#: src/include/partitioning/ep-lvm-dialogs.rb:857 +#. radio button label +#: src/include/partitioning/ep-lvm-dialogs.rb:857 msgid "Thin Volume" msgstr "씬 볼륨" -#. combo box label -#: src/include/partitioning/ep-lvm-dialogs.rb:865 +#. combo box label +#: src/include/partitioning/ep-lvm-dialogs.rb:865 msgid "Used Pool" msgstr "사용된 풀" -#. dialog title, %1 is a volume group -#: src/include/partitioning/ep-lvm-dialogs.rb:1029 +#. dialog title, %1 is a volume group +#: src/include/partitioning/ep-lvm-dialogs.rb:1029 msgid "Add Logical Volume on %1" msgstr "%1에 대한 논리적 볼륨 추가" -#. dialog title - %1 is a logical volume name, %2 is a volume group -#: src/include/partitioning/ep-lvm-dialogs.rb:1076 +#. dialog title - %1 is a logical volume name, %2 is a volume group +#: src/include/partitioning/ep-lvm-dialogs.rb:1076 msgid "Edit Logical Volume %1 on %2" msgstr "%2의 %1 논리 볼륨 편집" -#. error popup -#: src/include/partitioning/ep-lvm-lib.rb:68 +#. error popup +#: src/include/partitioning/ep-lvm-lib.rb:68 msgid "" "There are not enough suitable unused devices to create a volume group.\n" "\n" -"To use LVM, at least one unused partition of type 0x8e (or 0x83) or one " -"unused\n" +"To use LVM, at least one unused partition of type 0x8e (or 0x83) or one unused\n" "RAID device is required. Change your partition table accordingly." msgstr "" "볼륨 그룹을 생성하기에 적합한 사용하지 않는 장치가 충분하지 않습니다.\n" "\n" -"LVM을 사용하려면 유형 0x8e(또는 0x83)의 사용하지 않는 파티션이 하나 이상 또" -"는 한 개의\n" +"LVM을 사용하려면 유형 0x8e(또는 0x83)의 사용하지 않는 파티션이 하나 이상 또는 한 개의\n" "사용하지 않는 RAID 장치가 필요합니다. 파티션 테이블을 그에 따라 변경하십시오." -#. error popup -#. error popup -#: src/include/partitioning/ep-lvm-lib.rb:107 -#: src/include/partitioning/ep-lvm-lib.rb:165 +#. error popup +#. error popup +#: src/include/partitioning/ep-lvm-lib.rb:107 +#: src/include/partitioning/ep-lvm-lib.rb:165 msgid "No volume group selected." msgstr "볼륨 그룹을 선택하지 않았습니다." -#. empty VG - simple -#: src/include/partitioning/ep-lvm-lib.rb:181 +#. empty VG - simple +#: src/include/partitioning/ep-lvm-lib.rb:181 msgid "Really delete the volume group \"%1\"?" msgstr "볼륨 그룹 \"%1\"을(를) 삭제하시겠습니까?" -#: src/include/partitioning/ep-lvm-lib.rb:198 +#: src/include/partitioning/ep-lvm-lib.rb:198 msgid "Deleting volume group \"%1\" failed." msgstr "\"%1\" 볼륨 그룹을 삭제하지 못했습니다." -#. error popup -#. error popup -#. error popup -#. error popup -#: src/include/partitioning/ep-lvm-lib.rb:214 -#: src/include/partitioning/ep-lvm-lib.rb:316 -#: src/include/partitioning/ep-lvm-lib.rb:368 -#: src/include/partitioning/ep-lvm-lib.rb:403 +#. error popup +#. error popup +#. error popup +#. error popup +#: src/include/partitioning/ep-lvm-lib.rb:214 +#: src/include/partitioning/ep-lvm-lib.rb:316 +#: src/include/partitioning/ep-lvm-lib.rb:368 +#: src/include/partitioning/ep-lvm-lib.rb:403 msgid "No logical volume selected." msgstr "논리적 볼륨을 선택하지 않았습니다." -#. error popup -#: src/include/partitioning/ep-lvm-lib.rb:232 +#. error popup +#: src/include/partitioning/ep-lvm-lib.rb:232 msgid "No free space left in the volume group \"%1\"." msgstr "볼륨 그룹 \"%1\"에 여유 공간이 없습니다." -#. error popup, %1 is replace by partition device name e.g. /dev/system/root -#: src/include/partitioning/ep-lvm-lib.rb:327 +#. error popup, %1 is replace by partition device name e.g. /dev/system/root +#: src/include/partitioning/ep-lvm-lib.rb:327 msgid "" "The volume %1 is a thin pool.\n" "It cannot be edited." @@ -4287,8 +4234,8 @@ "볼륨 %1은(는) 씬 풀입니다.\n" "이것은 편집할 수 없습니다." -#. error popup, %1 is replace by partition device name e.g. /dev/system/root -#: src/include/partitioning/ep-lvm-lib.rb:338 +#. error popup, %1 is replace by partition device name e.g. /dev/system/root +#: src/include/partitioning/ep-lvm-lib.rb:338 msgid "" "The volume %1 is in use. It cannot be\n" "edited. To edit %1, make sure it is not used." @@ -4296,46 +4243,46 @@ "%1 볼륨을 사용 중이므로\n" "편집할 수 없습니다. %1을(를) 편집하려면 사용 중이 아니어야 합니다." -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/ep-lvm.rb:41 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/ep-lvm.rb:41 msgid "Add Logical Volume" msgstr "논리 볼륨 추가" -#: src/include/partitioning/ep-lvm.rb:190 +#: src/include/partitioning/ep-lvm.rb:190 msgid "Volume Group" msgstr "볼륨 그룹" -#. heading -#. tree node label -#: src/include/partitioning/ep-lvm.rb:204 -#: src/include/partitioning/ep-main.rb:390 +#. heading +#. tree node label +#: src/include/partitioning/ep-lvm.rb:204 +#: src/include/partitioning/ep-main.rb:390 msgid "Volume Management" msgstr "볼륨 관리" -#. helptext -#: src/include/partitioning/ep-lvm.rb:222 +#. helptext +#: src/include/partitioning/ep-lvm.rb:222 msgid "" "<p>This view shows all LVM volume groups and\n" "their logical volumes.</p>" @@ -4343,8 +4290,8 @@ "<p>이 보기는 모든 LVM 볼륨 그룹과\n" "논리적 볼륨을 보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm.rb:266 +#. helptext +#: src/include/partitioning/ep-lvm.rb:266 msgid "" "<p>This view shows detailed information about the\n" "selected volume group.</p>" @@ -4352,8 +4299,8 @@ "<p>이 보기는 선택한 볼륨 그룹에 대한\n" "세부 정보를 보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm.rb:345 +#. helptext +#: src/include/partitioning/ep-lvm.rb:345 msgid "" "<p>This view shows all logical volumes of the\n" "selected volume group.</p>" @@ -4361,8 +4308,8 @@ "<p>이 보기는 선택한 볼륨 그룹의 모든 논리적\n" "볼륨을 보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-lvm.rb:419 +#. helptext +#: src/include/partitioning/ep-lvm.rb:419 msgid "" "<p>This view shows all physical volumes used by\n" "the selected volume group.</p>" @@ -4370,28 +4317,28 @@ "<p>이 보기는 선택한 볼륨 그룹에서 사용한 모든 물리적\n" "볼륨을 보여 줍니다.</p>" -#. heading -#: src/include/partitioning/ep-lvm.rb:460 +#. heading +#: src/include/partitioning/ep-lvm.rb:460 msgid "Volume Group: %1" msgstr "볼륨 그룹: %1" -#. push button text -#: src/include/partitioning/ep-lvm.rb:469 +#. push button text +#: src/include/partitioning/ep-lvm.rb:469 msgid "&Logical Volumes" msgstr "논리적 볼륨(&L)" -#. push button text -#: src/include/partitioning/ep-lvm.rb:471 +#. push button text +#: src/include/partitioning/ep-lvm.rb:471 msgid "&Physical Volumes" msgstr "물리적 볼륨(&P)" -#. heading -#: src/include/partitioning/ep-lvm.rb:525 +#. heading +#: src/include/partitioning/ep-lvm.rb:525 msgid "Logical Volume: %1" msgstr "논리적 볼륨: %1" -#. helptext -#: src/include/partitioning/ep-lvm.rb:535 +#. helptext +#: src/include/partitioning/ep-lvm.rb:535 msgid "" "<p>This view shows detailed information about the\n" "selected logical volume.</p>" @@ -4399,56 +4346,56 @@ "<p>이 보기는 선택한 논리적 볼륨에 대한\n" "세부 정보를 보여 줍니다.</p>" -#. tree node label -#. heading -#: src/include/partitioning/ep-main.rb:382 -#: src/include/partitioning/ep-raid.rb:123 +#. tree node label +#. heading +#: src/include/partitioning/ep-main.rb:382 +#: src/include/partitioning/ep-raid.rb:123 msgid "RAID" msgstr "RAID" -#. tree node label -#: src/include/partitioning/ep-main.rb:406 +#. tree node label +#: src/include/partitioning/ep-main.rb:406 msgid "Device Mapper" msgstr "장치 매퍼" -#. tree node label -#: src/include/partitioning/ep-main.rb:414 +#. tree node label +#: src/include/partitioning/ep-main.rb:414 msgid "NFS" msgstr "NFS" -#. tree node label -#: src/include/partitioning/ep-main.rb:421 +#. tree node label +#: src/include/partitioning/ep-main.rb:421 msgid "Btrfs" msgstr "BTRFS" -#. tree node label -#: src/include/partitioning/ep-main.rb:428 +#. tree node label +#: src/include/partitioning/ep-main.rb:428 msgid "tmpfs" msgstr "TMPFS" -#. tree node label -#. heading -#: src/include/partitioning/ep-main.rb:435 -#: src/include/partitioning/ep-unused.rb:87 +#. tree node label +#. heading +#: src/include/partitioning/ep-main.rb:435 +#: src/include/partitioning/ep-unused.rb:87 msgid "Unused Devices" msgstr "사용하지 않는 장치" -#. tree node label -#. dialog heading -#: src/include/partitioning/ep-main.rb:464 -#: src/include/partitioning/ep-summary.rb:41 +#. tree node label +#. dialog heading +#: src/include/partitioning/ep-main.rb:464 +#: src/include/partitioning/ep-summary.rb:41 msgid "Installation Summary" msgstr "설치 요약" -#. tree node label -#. dialog heading -#: src/include/partitioning/ep-main.rb:475 -#: src/include/partitioning/ep-settings.rb:130 +#. tree node label +#. dialog heading +#: src/include/partitioning/ep-main.rb:475 +#: src/include/partitioning/ep-settings.rb:130 msgid "Settings" msgstr "설정" -#. popup text, %1 will be replaces with button text -#: src/include/partitioning/ep-main.rb:547 +#. popup text, %1 will be replaces with button text +#: src/include/partitioning/ep-main.rb:547 msgid "" "You have changed the partitioning or storage settings. These changes\n" "will be lost if you exit the partitioner with %1.\n" @@ -4458,37 +4405,34 @@ "파티션 도구를 종료하면 유실됩니다.\n" "종료하시겠습니까?" -#. helptext -#: src/include/partitioning/ep-main.rb:561 +#. helptext +#: src/include/partitioning/ep-main.rb:561 msgid "<p>Here you can see the partitioning summary.</p>" msgstr "<p>여기서 파티셔닝 요약을 볼 수 있습니다.</p>" -#. Fullscreen summary of changes -#: src/include/partitioning/ep-main.rb:573 +#. Fullscreen summary of changes +#: src/include/partitioning/ep-main.rb:573 msgid ": Summary" msgstr ": 요약" -#. tree node label -#: src/include/partitioning/ep-main.rb:648 +#. tree node label +#: src/include/partitioning/ep-main.rb:648 msgid "System View" msgstr "시스템 보기(&S)" -#. fallback dialog content -#: src/include/partitioning/ep-nfs.rb:55 -msgid "" -"NFS configuration is not available. Check yast2-nfs-client package " -"installation." -msgstr "" -"NFS 구성을 사용할 수 없습니다. yast2-nfs-client 패키지 설치를 확인하십시오." +#. fallback dialog content +#: src/include/partitioning/ep-nfs.rb:55 +msgid "NFS configuration is not available. Check yast2-nfs-client package installation." +msgstr "NFS 구성을 사용할 수 없습니다. yast2-nfs-client 패키지 설치를 확인하십시오." -#. heading -#: src/include/partitioning/ep-nfs.rb:127 +#. heading +#: src/include/partitioning/ep-nfs.rb:127 msgid "Network File System (NFS)" msgstr "네트워크 파일 시스템(NFS)" -#. rollback only if user does not want to save (#450060) -#. the mount might fail later if the errors are not corrected, but the user has been warned -#: src/include/partitioning/ep-nfs.rb:171 +#. rollback only if user does not want to save (#450060) +#. the mount might fail later if the errors are not corrected, but the user has been warned +#: src/include/partitioning/ep-nfs.rb:171 msgid "" "Test mount of NFS share '%1' failed.\n" "Save it anyway?" @@ -4496,62 +4440,52 @@ "NFS 공유 '%1'의 탑재를 테스트하지 못했습니다.\n" "그래도 저장하시겠습니까?" -#. error popup, %1 is replaced by raid type e.g. "RAID1", %2 is replaced by integer -#: src/include/partitioning/ep-raid-dialogs.rb:61 +#. error popup, %1 is replaced by raid type e.g. "RAID1", %2 is replaced by integer +#: src/include/partitioning/ep-raid-dialogs.rb:61 msgid "For %1, select at least %2 device." msgstr "%1의 경우 %2 이상의 장치를 선택합니다." -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:82 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:82 msgid "<p>Select the RAID type for the new RAID.</p>" msgstr "<p>새 RAID에 대한 RAID 유형을 선택합니다.</p>" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:87 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:87 msgid "" "<p><b>RAID 0:</b> This level increases your disk performance.\n" -"There is <b>NO</b> redundancy in this mode. If one of the drives crashes, " -"data recovery will not be possible.</p>\n" +"There is <b>NO</b> redundancy in this mode. If one of the drives crashes, data recovery will not be possible.</p>\n" msgstr "" "<p><b>RAID 0:</b> 이 수준은 디스크 성능을 향상시켜 줍니다.\n" -"이 모드에는 중복성이 <b>없습니다</b>. 드라이브 중 하나가 작동이 중지되더라도 " -"데이터 복구가 불가능합니다.</p>\n" +"이 모드에는 중복성이 <b>없습니다</b>. 드라이브 중 하나가 작동이 중지되더라도 데이터 복구가 불가능합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:95 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:95 msgid "" "<p><b>RAID 1:</b> <br>This mode has the best redundancy. It can be\n" -"used with two or more disks. This mode maintains an exact copy of all data " -"on all\n" -"disks. As long as at least one disk is still working, no data is lost. The " -"partitions\n" +"used with two or more disks. This mode maintains an exact copy of all data on all\n" +"disks. As long as at least one disk is still working, no data is lost. The partitions\n" "used for this type of RAID should have approximately the same size.</p>\n" msgstr "" "<p><b>RAID 1:</b> <br>이 모드는 가장 안정적입니다.\n" -"이 모드는 두개 이상의 디스크가 필요합니다. 이 모드는 모든 디스크의 모든 데이" -"터의\n" -"정확한 복사본을 유지합니다. 오랜 시간 후 하나의 디스크만이 동작해도 데이터를 " -"유지합니다.\n" +"이 모드는 두개 이상의 디스크가 필요합니다. 이 모드는 모든 디스크의 모든 데이터의\n" +"정확한 복사본을 유지합니다. 오랜 시간 후 하나의 디스크만이 동작해도 데이터를 유지합니다.\n" "이 방식의 RAID를 구성하기 위해서는 거의 같은 크기의 파티션이이어야 합니다.\n" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:106 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:106 msgid "" "<p><b>RAID 5:</b> <br>This mode combines management of a larger number\n" -"of disks and still maintains some redundancy. This mode can be used on three " -"disks or more.\n" -"If one disk fails, all data is still intact. If two disks fail " -"simultaneously, all data is lost</p>\n" +"of disks and still maintains some redundancy. This mode can be used on three disks or more.\n" +"If one disk fails, all data is still intact. If two disks fail simultaneously, all data is lost</p>\n" msgstr "" -"<p><b>RAID 5:</b> <br>이 모드는 데이터 안정성을 유지하면서 많은 수의 디스크" -"를\n" +"<p><b>RAID 5:</b> <br>이 모드는 데이터 안정성을 유지하면서 많은 수의 디스크를\n" "관리할 수 있습니다. 이 모드는 3개이상의 디스크를 사용할 수 있습니다.\n" -"디스크 하나가 고장나도 모든 데이터는 손상되지 않습니다. 만약 두개의 디스크" -"가\n" +"디스크 하나가 고장나도 모든 데이터는 손상되지 않습니다. 만약 두개의 디스크가\n" "동시에 고장나게 되면 모든 데이터를 잃어 버릴 수 있습니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:116 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:116 msgid "" "<p><b>Raid Name</b> gives you the possibility to provide a meaningful\n" "name for the raid. This is optional. If name is provided, the device is\n" @@ -4561,22 +4495,19 @@ "제공할 수 있습니다. 선택 사항입니다. 이름이 제공된 경우 장치를\n" "<tt>/dev/md/<name></tt>으로 사용할 수 있습니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:126 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:126 msgid "" "<p>Add partitions to your RAID. According to\n" -"the RAID type, the usable disk size is the sum of these partitions (RAID0), " -"the size\n" -"of the smallest partition (RAID 1), or (N-1)*smallest partition (RAID 5).\n" +"the RAID type, the usable disk size is the sum of these partitions (RAID0), the size\n" +"of the smallest partition (RAID 1), or (N-1)*smallest partition (RAID 5).</p>\n" msgstr "" "<p>RAID에 파티션을 추가합니다. RAID 유형에 따라\n" -"사용 가능한 디스크 크기는 이러한 파티션(RAID 0), 가장 작은 파티션의 크기" -"(RAID1)\n" +"사용 가능한 디스크 크기는 이러한 파티션(RAID 0), 가장 작은 파티션의 크기(RAID1)\n" " 또는 (N-1)*가장 작은 파티션(RAID 5)의 합계입니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:136 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:136 msgid "" "<p>Generally, the partitions should be on different drives,\n" "to get the redundancy and performance you want.</p>\n" @@ -4584,86 +4515,80 @@ "<p>일반적으로, 다른 드라이브에 존재하는 다수의 파티션에서\n" "원하는 안정성과 성능을 얻을 수 있습니다.\n" -#. heading -#. Column header -#: src/include/partitioning/ep-raid-dialogs.rb:191 -#: src/modules/StorageFields.rb:192 +#. heading +#. Column header +#: src/include/partitioning/ep-raid-dialogs.rb:191 +#: src/modules/StorageFields.rb:192 msgid "RAID Type" msgstr "RAID 유형" -#. Translators, 'Striping' is a technical term here. Translate only if -#. you are sure!! If in doubt, leave it in English. -#: src/include/partitioning/ep-raid-dialogs.rb:201 +#. Translators, 'Striping' is a technical term here. Translate only if +#. you are sure!! If in doubt, leave it in English. +#: src/include/partitioning/ep-raid-dialogs.rb:201 msgid "RAID &0 (Striping)" msgstr "RAID &0 (분할)" -#. Translators, 'Mirroring' is a technical term here. Translate only if -#. you are sure!! If in doubt, leave it in English. -#: src/include/partitioning/ep-raid-dialogs.rb:210 +#. Translators, 'Mirroring' is a technical term here. Translate only if +#. you are sure!! If in doubt, leave it in English. +#: src/include/partitioning/ep-raid-dialogs.rb:210 msgid "RAID &1 (Mirroring)" msgstr "RAID &1 (미러링)" -#. Translators, 'Redundant Striping' is a technical term here. Translate -#. only if you are sure!! If in doubt, leave it in English. -#: src/include/partitioning/ep-raid-dialogs.rb:219 +#. Translators, 'Redundant Striping' is a technical term here. Translate +#. only if you are sure!! If in doubt, leave it in English. +#: src/include/partitioning/ep-raid-dialogs.rb:219 msgid "RAID &5 (Redundant Striping)" msgstr "RAID &5 (복사본을 가진 분할)" -#. Translators, 'Redundant Striping' is a technical term here. Translate only if -#. you are sure!! If in doubt, leave it in English. -#: src/include/partitioning/ep-raid-dialogs.rb:228 +#. Translators, 'Redundant Striping' is a technical term here. Translate only if +#. you are sure!! If in doubt, leave it in English. +#: src/include/partitioning/ep-raid-dialogs.rb:228 msgid "RAID &6 (Dual Redundant Striping)" msgstr "RAID 6(이중 복제 스트라이핑)(&6)" -#. Translators, 'Mirroring' and 'Striping' are technical terms here. Translate only if -#. you are sure!! If in doubt, leave it in English. -#: src/include/partitioning/ep-raid-dialogs.rb:237 +#. Translators, 'Mirroring' and 'Striping' are technical terms here. Translate only if +#. you are sure!! If in doubt, leave it in English. +#: src/include/partitioning/ep-raid-dialogs.rb:237 msgid "RAID &10 (Mirroring and Striping)" msgstr "RAID 10(미러링 및 스트라이핑)(&1)" -#. label text -#: src/include/partitioning/ep-raid-dialogs.rb:248 +#. label text +#: src/include/partitioning/ep-raid-dialogs.rb:248 msgid "Raid &Name (optional)" msgstr "Raid 이름(선택 사항)(&N)" -#. label for selection box -#: src/include/partitioning/ep-raid-dialogs.rb:265 -#: src/include/partitioning/ep-raid-dialogs.rb:530 +#. label for selection box +#: src/include/partitioning/ep-raid-dialogs.rb:265 +#: src/include/partitioning/ep-raid-dialogs.rb:530 msgid "Available Devices:" msgstr "사용 가능한 장치:" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:338 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:338 msgid "" "<p><b>Chunk Size:</b><br>It is the smallest \"atomic\" mass\n" -"of data that can be written to the devices. A reasonable chunk size for RAID " -"5 is 128 kB. For RAID 0,\n" -"32 kB is a good starting point. For RAID 1, the chunk size does not affect " -"the array very much.</p>\n" +"of data that can be written to the devices. A reasonable chunk size for RAID 5 is 128 kB. For RAID 0,\n" +"32 kB is a good starting point. For RAID 1, the chunk size does not affect the array very much.</p>\n" msgstr "" -"<p><b>청크 크기:</b><br>장치에 기록할 수 있는 가장 작은 \"원자\" 대용량 데이" -"터입니다.\n" +"<p><b>청크 크기:</b><br>장치에 기록할 수 있는 가장 작은 \"원자\" 대용량 데이터입니다.\n" "RAID 5의 적당한 청크 크기는 128KB입니다. RAID 0의 경우\n" -"32KB부터 시작하는 것이 좋습니다. RAID 1의 경우 청크 크기는 배열에 큰 영향을 " -"주지 않습니다.</p>\n" +"32KB부터 시작하는 것이 좋습니다. RAID 1의 경우 청크 크기는 배열에 큰 영향을 주지 않습니다.</p>\n" -#: src/include/partitioning/ep-raid-dialogs.rb:346 +#: src/include/partitioning/ep-raid-dialogs.rb:346 msgid "Parity Algorithm:" msgstr "패리티 알고리즘:" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:353 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:353 msgid "" "The parity algorithm to use with RAID5/6.\n" -"Left-symmetric is the one that offers maximum performance on typical disks " -"with rotating platters.\n" +"Left-symmetric is the one that offers maximum performance on typical disks with rotating platters.\n" msgstr "" "RAID 5/6에서 사용하는 패리티 알고리즘입니다.\n" -"왼쪽 대칭방식은 회전 플래터가 있는 일반적인 디스크에서 최대 성능을 제공합니" -"다.</p>\n" +"왼쪽 대칭방식은 회전 플래터가 있는 일반적인 디스크에서 최대 성능을 제공합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:361 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:361 msgid "" "For further details regarding the parity \n" "algorithm please look at the man page for mdadm (man mdadm).\n" @@ -4671,66 +4596,66 @@ "패리티 알고리즘에 대한 자세한 내용은 \n" "mdadm 맨 페이지(man mdadm)를 참조하십시오.\n" -#. Column header -#: src/include/partitioning/ep-raid-dialogs.rb:406 -#: src/modules/StorageFields.rb:195 +#. Column header +#: src/include/partitioning/ep-raid-dialogs.rb:406 +#: src/modules/StorageFields.rb:195 msgid "Chunk Size" msgstr "청크 크기" -#. combo box label -#: src/include/partitioning/ep-raid-dialogs.rb:427 +#. combo box label +#: src/include/partitioning/ep-raid-dialogs.rb:427 msgid "Parity &Algorithm" msgstr "패리티 알고리즘(&A)" -#. heading -#: src/include/partitioning/ep-raid-dialogs.rb:436 +#. heading +#: src/include/partitioning/ep-raid-dialogs.rb:436 msgid "RAID Options" msgstr "RAID 옵션" -#. helptext -#: src/include/partitioning/ep-raid-dialogs.rb:481 +#. helptext +#: src/include/partitioning/ep-raid-dialogs.rb:481 msgid "<p>Change the devices that are used for the RAID.</p>" msgstr "<p>RAID에 사용된 장치를 변경합니다.</p>" -#. dialog title -#: src/include/partitioning/ep-raid-dialogs.rb:643 +#. dialog title +#: src/include/partitioning/ep-raid-dialogs.rb:643 msgid "Add RAID %1" msgstr "RAID %1 추가" -#. dialog title -#: src/include/partitioning/ep-raid-dialogs.rb:677 +#. dialog title +#: src/include/partitioning/ep-raid-dialogs.rb:677 msgid "Resize RAID %1" msgstr "RAID %1 크기 조정" -#. dialog title -#: src/include/partitioning/ep-raid-dialogs.rb:723 +#. dialog title +#: src/include/partitioning/ep-raid-dialogs.rb:723 msgid "Edit RAID %1" msgstr "RAID %1 편집" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/ep-raid-lib.rb:76 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/ep-raid-lib.rb:76 msgid "" "\n" "Raid %1 cannot be modified because it is in inactive state.\n" @@ -4743,22 +4668,22 @@ "RAID를 사용할 수 없습니다.\n" "\n" -#. error popup -#: src/include/partitioning/ep-raid-lib.rb:99 +#. error popup +#: src/include/partitioning/ep-raid-lib.rb:99 msgid "There are not enough suitable unused devices to create a RAID." msgstr "RAID를 생성하기에 적합한 사용하지 않는 장치가 충분하지 않습니다." -#. error popup -#. error popup -#. error popup -#: src/include/partitioning/ep-raid-lib.rb:153 -#: src/include/partitioning/ep-raid-lib.rb:196 -#: src/include/partitioning/ep-raid-lib.rb:255 +#. error popup +#. error popup +#. error popup +#: src/include/partitioning/ep-raid-lib.rb:153 +#: src/include/partitioning/ep-raid-lib.rb:196 +#: src/include/partitioning/ep-raid-lib.rb:255 msgid "No RAID selected." msgstr "RAID를 선택하지 않았습니다." -#. error popup, %1 is replaced by device name e.g. /dev/md1 -#: src/include/partitioning/ep-raid-lib.rb:166 +#. error popup, %1 is replaced by device name e.g. /dev/md1 +#: src/include/partitioning/ep-raid-lib.rb:166 msgid "" "The RAID %1 is in use. It cannot be\n" "edited. To edit %1, make sure it is not used." @@ -4766,8 +4691,8 @@ "RAID %1이(가) 사용 중이어서\n" "편집할 수 없습니다. %1을(를) 편집하려면 사용되지 않도록 합니다." -#. error popup, %1 is replaced by device name e.g. /dev/md1 -#: src/include/partitioning/ep-raid-lib.rb:209 +#. error popup, %1 is replaced by device name e.g. /dev/md1 +#: src/include/partitioning/ep-raid-lib.rb:209 msgid "" "The RAID %1 is already created on disk. It cannot be\n" "resized. To resize %1, remove it and create it again." @@ -4776,8 +4701,8 @@ "크기를 조정할 수 없습니다. %1의 크기를 조정하려면\n" "이 항목을 제거한 후 다시 생성하십시오." -#. error popup, %1 is replaced by device name e.g. /dev/md1 -#: src/include/partitioning/ep-raid-lib.rb:222 +#. error popup, %1 is replaced by device name e.g. /dev/md1 +#: src/include/partitioning/ep-raid-lib.rb:222 msgid "" "The RAID %1 is in use. It cannot be\n" "resized. To resize %1, make sure it is not used." @@ -4785,18 +4710,18 @@ "RAID %1이(가) 사용 중이어서\n" "크기를 조정할 수 없습니다. %1의 크기를 조정하려면 사용되지 않도록 합니다." -#. push button text -#: src/include/partitioning/ep-raid.rb:132 +#. push button text +#: src/include/partitioning/ep-raid.rb:132 msgid "Add RAID..." msgstr "RAID 추가..." -#. helptext -#: src/include/partitioning/ep-raid.rb:141 +#. helptext +#: src/include/partitioning/ep-raid.rb:141 msgid "<p>This view shows all RAIDs except BIOS RAIDs.</p>" msgstr "<p>이 보기는 BIOS RAID를 제외한 모든 RAID를 표시합니다.</p>" -#. helptext -#: src/include/partitioning/ep-raid.rb:204 +#. helptext +#: src/include/partitioning/ep-raid.rb:204 msgid "" "<p>This view shows detailed information about the\n" "selected RAID.</p>" @@ -4804,8 +4729,8 @@ "<p>이 보기는 선택한 RAID에 대한\n" "세부 정보를 보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-raid.rb:272 +#. helptext +#: src/include/partitioning/ep-raid.rb:272 msgid "" "<p>This view shows all devices used by the\n" "selected RAID.</p>" @@ -4813,130 +4738,123 @@ "<p>이 보기는 선택한 RAID에서 사용한\n" "모든 장치를 보여 줍니다.</p>" -#. heading -#: src/include/partitioning/ep-raid.rb:308 +#. heading +#: src/include/partitioning/ep-raid.rb:308 msgid "RAID: %1" msgstr "RAID: %1" -#. list entry -#. Column header -#: src/include/partitioning/ep-settings.rb:36 -#: src/modules/StorageFields.rb:165 +#. list entry +#. Column header +#: src/include/partitioning/ep-settings.rb:36 src/modules/StorageFields.rb:165 msgid "Label" msgstr "레이블" -#. list entry -#. combo box entry -#. Column header -#: src/include/partitioning/ep-settings.rb:38 -#: src/include/partitioning/ep-settings.rb:65 -#: src/modules/StorageFields.rb:162 +#. list entry +#. combo box entry +#. Column header +#: src/include/partitioning/ep-settings.rb:38 +#: src/include/partitioning/ep-settings.rb:65 src/modules/StorageFields.rb:162 msgid "UUID" msgstr "UUID" -#. list entry -#. Column header -#: src/include/partitioning/ep-settings.rb:40 -#: src/modules/StorageFields.rb:147 +#. list entry +#. Column header +#: src/include/partitioning/ep-settings.rb:40 src/modules/StorageFields.rb:147 msgid "Mount by" msgstr "마운트 방식" -#. list entry -#. Column header -#: src/include/partitioning/ep-settings.rb:42 -#: src/modules/StorageFields.rb:150 +#. list entry +#. Column header +#: src/include/partitioning/ep-settings.rb:42 src/modules/StorageFields.rb:150 msgid "Used by" msgstr "사용" -#. list entry -#. Column header -#: src/include/partitioning/ep-settings.rb:44 -#: src/modules/StorageFields.rb:174 +#. list entry +#. Column header +#: src/include/partitioning/ep-settings.rb:44 src/modules/StorageFields.rb:174 msgid "BIOS ID" msgstr "BIOS ID" -#. list entry -#: src/include/partitioning/ep-settings.rb:47 +#. list entry +#: src/include/partitioning/ep-settings.rb:47 msgid "Cylinder information" msgstr "실린더 정보" -#. list entry -#: src/include/partitioning/ep-settings.rb:52 +#. list entry +#: src/include/partitioning/ep-settings.rb:52 msgid "Fibre Channel information" msgstr "파이버 채널 정보" -#. list entry -#: src/include/partitioning/ep-settings.rb:56 +#. list entry +#: src/include/partitioning/ep-settings.rb:56 msgid "Encryption" msgstr "암호화" -#. combo box entry -#. combo box entry -#: src/include/partitioning/ep-settings.rb:61 -#: src/include/partitioning/ep-settings.rb:81 +#. combo box entry +#. combo box entry +#: src/include/partitioning/ep-settings.rb:61 +#: src/include/partitioning/ep-settings.rb:81 msgid "Device Name" msgstr "장치 이름" -#. combo box entry -#: src/include/partitioning/ep-settings.rb:63 +#. combo box entry +#: src/include/partitioning/ep-settings.rb:63 msgid "Volume Label" msgstr "볼륨 레이블" -#. combo box entry -#. combo box entry -#. Column header -#: src/include/partitioning/ep-settings.rb:67 -#: src/include/partitioning/ep-settings.rb:83 -#: src/modules/StorageFields.rb:171 +#. combo box entry +#. combo box entry +#. Column header +#: src/include/partitioning/ep-settings.rb:67 +#: src/include/partitioning/ep-settings.rb:83 src/modules/StorageFields.rb:171 msgid "Device ID" msgstr "장치 ID" -#. combo box entry -#. combo box entry -#. Column header -#: src/include/partitioning/ep-settings.rb:69 -#: src/include/partitioning/ep-settings.rb:85 -#: src/modules/StorageFields.rb:168 +#. combo box entry +#. combo box entry +#. Column header +#: src/include/partitioning/ep-settings.rb:69 +#: src/include/partitioning/ep-settings.rb:85 src/modules/StorageFields.rb:168 msgid "Device Path" msgstr "장치 경로" -#. combo box entry -#: src/include/partitioning/ep-settings.rb:74 +#. combo box entry +#: src/include/partitioning/ep-settings.rb:74 msgid "Optimal" msgstr "최적" -#. combo box entry -#: src/include/partitioning/ep-settings.rb:76 +#. combo box entry +#: src/include/partitioning/ep-settings.rb:76 msgid "Cylinder" msgstr "원통형" -#. combo box label -#: src/include/partitioning/ep-settings.rb:136 +#. combo box label +#: src/include/partitioning/ep-settings.rb:136 msgid "Default Mount by" msgstr "기본 마운트 기준" -#. combo box label -#: src/include/partitioning/ep-settings.rb:145 +#. combo box label +#: src/include/partitioning/ep-settings.rb:145 msgid "Default File System" msgstr "기본 파일 시스템" -#. combo box label -#: src/include/partitioning/ep-settings.rb:154 +#. combo box label +#: src/include/partitioning/ep-settings.rb:154 msgid "Alignment of Newly Created Partitions" msgstr "새로 생성된 파티션 정렬" -#. combo box label -#: src/include/partitioning/ep-settings.rb:164 +#. combo box label +#: src/include/partitioning/ep-settings.rb:164 msgid "Show Storage Devices by" msgstr "저장소 장치 표시 기준" -#. multi selection box label -#: src/include/partitioning/ep-settings.rb:177 +#. multi selection box label +#: src/include/partitioning/ep-settings.rb:177 msgid "Visible Information on Storage Devices" msgstr "저장소 장치의 정보 표시" -#. helptext -#: src/include/partitioning/ep-settings.rb:191 +#. helptext +#: src/include/partitioning/ep-settings.rb:191 msgid "" "<p>This view shows general storage\n" "settings:</p>" @@ -4944,16 +4862,14 @@ "<p>이 보기는 일반 저장소\n" "설정을 보여 줍니다.</p>" -#. helptext -#: src/include/partitioning/ep-settings.rb:196 +#. helptext +#: src/include/partitioning/ep-settings.rb:196 msgid "" "<p><b>Default Mount by</b> gives the mount by\n" "method for newly created file systems. <i>Device Name</i> uses the kernel\n" -"device name, which is not persistent. <i>Device ID</i> and <i>Device Path\n" +"device name, which is not persistent. <i>Device ID</i> and <i>Device Path</i>\n" "use names generated by udev from hardware information. These should be\n" -"persistent but unfortunately this is not always true. Finally <i>UUID</i> " -"and\n" +"persistent but unfortunately this is not always true. Finally <i>UUID</i> and\n" "<i>Volume Label</i> use the file systems UUID and label.</p>\n" msgstr "" "<p><b>기본 마운트 방법</b>은 새로 생성된 파일 시스템에 대한\n" @@ -4963,8 +4879,8 @@ "영구적이어야 하지만 항상 그렇지는 않습니다. 마지막으로 <i>UUID</i> 및\n" "<i>볼륨 레이블</i>은 파일 시스템의 UUID 및 레이블을 사용합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-settings.rb:209 +#. helptext +#: src/include/partitioning/ep-settings.rb:209 msgid "" "<p><b>Default File System</b> gives the file\n" "system type for newly created file systems.</p>\n" @@ -4972,24 +4888,21 @@ "<p><b>기본 파일 시스템</b>은 새로 생성한\n" "파일 시스템에 대한 파일 시스템 유형을 제공합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-settings.rb:217 +#. helptext +#: src/include/partitioning/ep-settings.rb:217 msgid "" "<p><b>Alignment of Newly Created Partitions</b>\n" -"determines how created partitions are aligned. <b>cylinder</b> is the " -"traditional alignment at cylinder boundaries of the disk. <b>optimal</b> " -"aligns the \n" +"determines how created partitions are aligned. <b>cylinder</b> is the traditional alignment at cylinder boundaries of the disk. <b>optimal</b> aligns the \n" "partitions for best performance according to hints provided by the Linux \n" "kernel or tries to be compatible with Windows Vista and Win 7.</p>\n" msgstr "" "<p><b>새로 생성된 파티션 정렬</b>은\n" -"생성된 파티션의 정렬 방식을 결정합니다. <b>실린더</b>는 디스크 실린더 경계의 " -"일반적인 정렬이며, <b>최적</b>은 Linux 커널에서\n" +"생성된 파티션의 정렬 방식을 결정합니다. <b>실린더</b>는 디스크 실린더 경계의 일반적인 정렬이며, <b>최적</b>은 Linux 커널에서\n" "제공한 힌트에 따라 최상의 성능을 발휘하도록 파티션을 정렬하거나\n" "Windows Vista 및 Win 7과 호환되도록 합니다.</p>\n" -#. helptext -#: src/include/partitioning/ep-settings.rb:228 +#. helptext +#: src/include/partitioning/ep-settings.rb:228 msgid "" "<p><b>Show Storage Devices by</b> controls\n" "the name displayed for hard disks in the navigation tree.</p>" @@ -4997,8 +4910,8 @@ "<p><b>저장소 장치 표시 기준</b>은 탐색 트리의 하드 디스크에\n" "표시된 이름을 제어합니다.</p>" -#. helptext -#: src/include/partitioning/ep-settings.rb:236 +#. helptext +#: src/include/partitioning/ep-settings.rb:236 msgid "" "<p><b>Visible Information On Storage\n" "Devices</b> allows to hide information in the tables and overview.</p>" @@ -5006,23 +4919,23 @@ "<p><b>저장소 장치에서 볼 수 있는\n" "정보</b>를 사용하면 테이블과 개요에서 정보를 숨길 수 있습니다.</p>" -#. helptext -#: src/include/partitioning/ep-summary.rb:50 +#. helptext +#: src/include/partitioning/ep-summary.rb:50 msgid "<p>This view shows the installation summary.</p>" msgstr "<p>이 보기는 설치 요약을 표시합니다.</p>" -#. dialog title -#: src/include/partitioning/ep-tmpfs-dialogs.rb:50 +#. dialog title +#: src/include/partitioning/ep-tmpfs-dialogs.rb:50 msgid "Add tmpfs Mount" msgstr "TMPFS 마운트 추가" -#. error popup -#: src/include/partitioning/ep-tmpfs-lib.rb:35 +#. error popup +#: src/include/partitioning/ep-tmpfs-lib.rb:35 msgid "No tmpfs device selected." msgstr "TMPFS 장치를 선택하지 않았습니다." -#. YesNo popup. %1 is path to a file -#: src/include/partitioning/ep-tmpfs-lib.rb:48 +#. YesNo popup. %1 is path to a file +#: src/include/partitioning/ep-tmpfs-lib.rb:48 msgid "" "\n" "Really delete tmpfs mounted to %1" @@ -5030,18 +4943,18 @@ "\n" "%1에 마운트된 TMPFS를 삭제합니다." -#. heading -#: src/include/partitioning/ep-tmpfs.rb:101 +#. heading +#: src/include/partitioning/ep-tmpfs.rb:101 msgid "tmpfs Volumes" msgstr "TMPFS 볼륨" -#. helptext -#: src/include/partitioning/ep-tmpfs.rb:121 +#. helptext +#: src/include/partitioning/ep-tmpfs.rb:121 msgid "<p>This view shows all tmpfs volumes.</p>" msgstr "<p>이 보기는 모든 TMPFS 볼륨을 표시합니다.</p>" -#. helptext -#: src/include/partitioning/ep-tmpfs.rb:178 +#. helptext +#: src/include/partitioning/ep-tmpfs.rb:178 msgid "" "<p>This view shows detailed information about the\n" "selected tmpfs volume.</p>\n" @@ -5049,18 +4962,18 @@ "<p>이 보기는 선택한 TMPFS 볼륨에 대한\n" "세부 정보를 나타냅니다.</p>\n" -#. heading -#: src/include/partitioning/ep-tmpfs.rb:234 +#. heading +#: src/include/partitioning/ep-tmpfs.rb:234 msgid "tmpfs mounted at %1" msgstr "TMPFS가 %1에 마운트됨" -#. push button text -#: src/include/partitioning/ep-unused.rb:96 +#. push button text +#: src/include/partitioning/ep-unused.rb:96 msgid "Rescan" msgstr "재검색" -#. helptext -#: src/include/partitioning/ep-unused.rb:104 +#. helptext +#: src/include/partitioning/ep-unused.rb:104 msgid "" "<p>This view shows devices that have no mount\n" "point assigned to them, disks that are unpartitioned and volume groups that\n" @@ -5070,8 +4983,8 @@ "분할되지 않은 디스크 및 논리적 볼륨이 없는\n" "볼륨 그룹을 보여 줍니다.</p>" -#. popup message -#: src/include/partitioning/ep-unused.rb:130 +#. popup message +#: src/include/partitioning/ep-unused.rb:130 msgid "" "Rescanning unused devices cancels\n" "all current changes. Really rescan unused devices?" @@ -5079,30 +4992,30 @@ "사용하지 않는 장치를 다시 스캔하면\n" "현재 모든 변경 사항이 취소됩니다. 사용하지 않는 장치를 다시 스캔하시겠습니까?" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: ep-main.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/include/partitioning/lvm_lv_lib.rb:38 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: ep-main.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/include/partitioning/lvm_lv_lib.rb:38 msgid "" "A logical volume with the requested size could \n" "not be created.\n" @@ -5110,17 +5023,17 @@ "요청한 크기의 논리적 볼륨을 \n" "만들 수 없습니다.\n" -#: src/include/partitioning/lvm_lv_lib.rb:42 +#: src/include/partitioning/lvm_lv_lib.rb:42 msgid "Try reducing the stripe count of the volume." msgstr "볼륨의 분할 수를 줄여보십시오." -#. Popup text -#: src/include/partitioning/lvm_ui_dialogs.rb:48 +#. Popup text +#: src/include/partitioning/lvm_ui_dialogs.rb:48 msgid "You can only remove logical volumes." msgstr "논리적 볼륨만 삭제할 수 있습니다." -#. Popup text -#: src/include/partitioning/lvm_ui_dialogs.rb:54 +#. Popup text +#: src/include/partitioning/lvm_ui_dialogs.rb:54 msgid "" "There is at least one snapshot active for this volume.\n" "Remove the snapshot first." @@ -5128,8 +5041,8 @@ "이 볼륨에 대한 하나 이상의 스냅샷이 활성화되어 있습니다.\n" "먼저 스냅샷을 제거하십시오." -#. Popup text -#: src/include/partitioning/lvm_ui_dialogs.rb:63 +#. Popup text +#: src/include/partitioning/lvm_ui_dialogs.rb:63 msgid "" "There is at least one thin volume using this pool.\n" "Remove the thin volume first." @@ -5137,100 +5050,100 @@ "이 풀을 사용하는 씬 볼륨이 하나 이상 있습니다.\n" "먼저 씬 볼륨을 제거하십시오." -#. Popup text -#: src/include/partitioning/lvm_ui_dialogs.rb:69 +#. Popup text +#: src/include/partitioning/lvm_ui_dialogs.rb:69 msgid "Remove the logical volume %1?" msgstr "논리적인 볼률 %1를 삭제하시겠습니까?" -#. footer text, %1 is replaced by size -#: src/modules/DevicesSelectionBox.rb:92 +#. footer text, %1 is replaced by size +#: src/modules/DevicesSelectionBox.rb:92 msgid "Total size: %1" msgstr "전체 크기: %1" -#. footer text, %1 is replaced by size -#: src/modules/DevicesSelectionBox.rb:107 +#. footer text, %1 is replaced by size +#: src/modules/DevicesSelectionBox.rb:107 msgid "Resulting size: %1" msgstr "결과 크기: %1" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: DualMultiSelectionBox.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#. -#. The items must have the `id() as their first element. -#. button text -#: src/modules/DualMultiSelectionBox.rb:89 -#: src/modules/DualMultiSelectionBox.rb:312 -#: src/modules/DualMultiSelectionBox.rb:428 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: DualMultiSelectionBox.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#. +#. The items must have the `id() as their first element. +#. button text +#: src/modules/DualMultiSelectionBox.rb:89 +#: src/modules/DualMultiSelectionBox.rb:312 +#: src/modules/DualMultiSelectionBox.rb:428 msgid "Class" msgstr "클래스" -#: src/modules/DualMultiSelectionBox.rb:99 +#: src/modules/DualMultiSelectionBox.rb:99 msgid "Top" msgstr "상단" -#: src/modules/DualMultiSelectionBox.rb:101 +#: src/modules/DualMultiSelectionBox.rb:101 msgid "Up" msgstr "위" -#: src/modules/DualMultiSelectionBox.rb:103 +#: src/modules/DualMultiSelectionBox.rb:103 msgid "Down" msgstr "아래" -#: src/modules/DualMultiSelectionBox.rb:105 +#: src/modules/DualMultiSelectionBox.rb:105 msgid "Bottom" msgstr "하단" -#: src/modules/DualMultiSelectionBox.rb:107 +#: src/modules/DualMultiSelectionBox.rb:107 msgid "Classify" msgstr "분류" -#. push button text -#: src/modules/DualMultiSelectionBox.rb:134 +#. push button text +#: src/modules/DualMultiSelectionBox.rb:134 msgid "Add" msgstr "추가" -#. push button text -#: src/modules/DualMultiSelectionBox.rb:140 +#. push button text +#: src/modules/DualMultiSelectionBox.rb:140 msgid "Add All" msgstr "모두 추가" -#. push button text -#: src/modules/DualMultiSelectionBox.rb:153 +#. push button text +#: src/modules/DualMultiSelectionBox.rb:153 msgid "Remove All" msgstr "모두 제거" -#. error popup text -#: src/modules/DualMultiSelectionBox.rb:183 +#. error popup text +#: src/modules/DualMultiSelectionBox.rb:183 msgid "File %1 is not a regular file!" msgstr "%1 파일이 일반 파일이 아닙니다!" -#. error popup text -#: src/modules/DualMultiSelectionBox.rb:188 +#. error popup text +#: src/modules/DualMultiSelectionBox.rb:188 msgid "File %1 is too big!" msgstr "%1 파일이 너무 큽니다!" -#. error popup text -#: src/modules/DualMultiSelectionBox.rb:212 +#. error popup text +#: src/modules/DualMultiSelectionBox.rb:212 msgid "" "Pattern file has invalid format!\n" "\n" @@ -5242,50 +5155,43 @@ "파일은 정규식을 포함한 행과 행당 클래스 이름을\n" "포함해야 합니다. 예:" -#. popup text -#: src/modules/DualMultiSelectionBox.rb:237 +#. popup text +#: src/modules/DualMultiSelectionBox.rb:237 msgid "Detected following pattern lines:" msgstr "다음 패턴 행이 탐지되었습니다." -#: src/modules/DualMultiSelectionBox.rb:250 +#: src/modules/DualMultiSelectionBox.rb:250 msgid "Ok to match devices to classes with these patterns?" msgstr "장치를 이러한 패턴의 클래스에 일치시키겠습니까?" -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:316 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:316 msgid "" "<p>This dialog is for defining classes for the raid devices\n" -"contained in the raid. Available classes are A, B, C, D and E but for many " -"cases\n" +"contained in the raid. Available classes are A, B, C, D and E but for many cases\n" "fewer classes are needed (e.g. only A and B). </p>" msgstr "" "<p>이 대화 상자는 RAID에 포함된 RAID 장치에 대한\n" -"클래스를 정의합니다. 사용할 수 있는 클래스는 A, B, C, D 및 E이지만, 대부분의 " -"경우\n" +"클래스를 정의합니다. 사용할 수 있는 클래스는 A, B, C, D 및 E이지만, 대부분의 경우\n" "더 적은 수의 클래스가 필요합니다(예: A와 B만). </p>" -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:325 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:325 msgid "" "<p>You can put a device into a class by right-clicking on the\n" -"device and choosing the appropriate class from context menu. By pressing " -"the \n" -"Ctrl or Shift key you can select multiple devices and put them into a class " -"in\n" -"one step. One can also use the buttons labeled \"%1\" to \"%2\" to put " -"currently \n" +"device and choosing the appropriate class from context menu. By pressing the \n" +"Ctrl or Shift key you can select multiple devices and put them into a class in\n" +"one step. One can also use the buttons labeled \"%1\" to \"%2\" to put currently \n" "selected devices into this class.</p>" msgstr "" "<p>장치를 마우스 오른쪽 버튼으로 클릭하고 상황별 메뉴에서\n" "해당 클래스를 선택하여 장치를 클래스에 배치할 수 있습니다. \n" -"Ctrl 또는 Shift 키를 누르면 장치를 여러 개 선택하여 선택한 장치를 한 단계로 " -"클래스에 배치할\n" -"수 있습니다. 또한 \"%1\" ~ \"%2\" 레이블의 단추를 사용하여 현재 선택한 장치" -"를 \n" +"Ctrl 또는 Shift 키를 누르면 장치를 여러 개 선택하여 선택한 장치를 한 단계로 클래스에 배치할\n" +"수 있습니다. 또한 \"%1\" ~ \"%2\" 레이블의 단추를 사용하여 현재 선택한 장치를 \n" "이 클래스에 배치할 수 있습니다.</p>" -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:340 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:340 msgid "" "<p>After choosing classes for devices you can order the \n" "devices by pressing one of the buttons labeled \"%1\" or \"%2\"." @@ -5293,8 +5199,8 @@ "<p>장치 클래스를 선택한 후 \"%1\" 또는 \"%2\" \n" "레이블의 버튼 중 하나를 눌러 장치 순서를 지정할 수 있습니다." -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:351 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:351 msgid "" "<b>Sorted</b> puts all devices of class A before all devices\n" "of class B and so on." @@ -5302,21 +5208,19 @@ "<b>정렬됨</b>은 클래스 A의 모든 장치를 클래스 B 및 기타 클래스의 모든\n" "장치 앞에 배치합니다." -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:359 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:359 msgid "" "<b>Interleaved</b> uses first device of class A, then first device of \n" "class B, then all the following classes with assigned devices. Then the \n" -"second device of class A, the second device of class B, and so on will " -"follow." +"second device of class A, the second device of class B, and so on will follow." msgstr "" "<b>인터리브</b>는 클래스 A의 첫 번째 장치, 클래스 B의 \n" -"첫 번째 장치 그리고, 다음에 나오는 모든 클래스를 할당된 장치에 차례로 사용합" -"니다. 그런 다음 \n" +"첫 번째 장치 그리고, 다음에 나오는 모든 클래스를 할당된 장치에 차례로 사용합니다. 그런 다음 \n" "클래스 A의 두 번째 장치, 클래스 B의 두 번째 장치 순으로 사용합니다." -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:369 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:369 msgid "" "All devices without a class are sorted to the end of devices list.\n" "When you leave the pop-up the current order of the devices is used as the \n" @@ -5326,87 +5230,79 @@ "팝업에서 나가면 장치의 현재 순서가 RAID에서 생성되는\n" "순서로 사용됩니다.</p>" -#. dialog help text -#: src/modules/DualMultiSelectionBox.rb:379 +#. dialog help text +#: src/modules/DualMultiSelectionBox.rb:379 msgid "" "By pressing button \"<b>%1</b>\" you can select a file that contains\n" -"lines with a regular expression and a class name (e.g. \"sda.* A\"). All " -"devices that match \n" -"the regular expression will be put into the class on this line. The regular " -"expression is \n" +"lines with a regular expression and a class name (e.g. \"sda.* A\"). All devices that match \n" +"the regular expression will be put into the class on this line. The regular expression is \n" "matched against the kernel name (e.g. /dev/sda1), \n" -"the udev path name (e.g. /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-" -"part1) and the\n" +"the udev path name (e.g. /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1) and the\n" "the udev id (e.g. /dev/disk/by-id/ata-ST3500418AS_9VMN8X8L-part1). \n" -"The first match finally determines the class if a devices name matches more " -"then one\n" +"The first match finally determines the class if a devices name matches more then one\n" "regular expression.</p>" msgstr "" "\"<b>%1</b>\" 버튼을 눌러 정규식과 클래스\n" "이름(예: \"sda.* A\") 행을 포함하는 파일을 선택할 수 있습니다. 정규식과 \n" -"일치하는 모든 장치가 이 행의 클래스에 삽입됩니다. 정규식은 커널 이름(예: /" -"dev/sda1), \n" +"일치하는 모든 장치가 이 행의 클래스에 삽입됩니다. 정규식은 커널 이름(예: /dev/sda1), \n" "udev 경로 이름(예: /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0-part1)\n" "및 udev id(예: /dev/disk/by-id/ata-ST3500418AS_9VMN8X8L-part1)와\n" "비교됩니다. \n" -"장치 이름이 둘 이상의 정규식과 일치할 경우 최종적으로 첫 번째 일치가 클래스" -"를\n" +"장치 이름이 둘 이상의 정규식과 일치할 경우 최종적으로 첫 번째 일치가 클래스를\n" "결정합니다.</p>" -#. headline text -#. Column header -#: src/modules/DualMultiSelectionBox.rb:428 src/modules/StorageFields.rb:126 +#. headline text +#. Column header +#: src/modules/DualMultiSelectionBox.rb:428 src/modules/StorageFields.rb:126 msgid "Device" msgstr "장치" -#. headline text -#: src/modules/DualMultiSelectionBox.rb:550 +#. headline text +#: src/modules/DualMultiSelectionBox.rb:550 msgid "Pattern File" msgstr "패턴 파일" -#. label text -#: src/modules/FileSystems.rb:278 +#. label text +#: src/modules/FileSystems.rb:278 msgid "Tmpfs &Size" msgstr "TMPFS 크기(&S)" -#. popup text -#: src/modules/FileSystems.rb:287 +#. popup text +#: src/modules/FileSystems.rb:287 msgid "" "Invalid Size specified. Use number followed by K, M, G or %.\n" "Value must be above 100k or between 1% and 200%. Try again." msgstr "" -"잘못된 크기가 지정되었습니다. 숫자를 먼저 사용한 후 K, M, G 또는 %를 사용하십" -"시오.\n" +"잘못된 크기가 지정되었습니다. 숫자를 먼저 사용한 후 K, M, G 또는 %를 사용하십시오.\n" "값은 100k 이상 또는 1% ~ 200% 범위여야 합니다. 다시 해보십시오." -#: src/modules/FileSystems.rb:290 +#: src/modules/FileSystems.rb:290 msgid "Value must be between 1% and 200%. Try again." msgstr "값은 1%와 200% 사이여야 합니다. 다시 해보십시오." -#. help text, richtext format -#: src/modules/FileSystems.rb:297 +#. help text, richtext format +#: src/modules/FileSystems.rb:297 msgid "" "<p><b>Tmpfs Size:</b>\n" -"Size may be either entered as a number followed by K,M,G for Kilo-, Mega- or " -"Gigabyte or\n" +"Size may be either entered as a number followed by K,M,G for Kilo-, Mega- or Gigabyte or\n" "as a number followed by a percent sign meaning percentage of memory.</p>" msgstr "" "<p><b>TMPFS 크기:</b>\n" "크기는 숫자+K(Kilobyte), M(Megabyte) 또는 G(Gigabyte) 또는\n" "숫자+퍼센트 부호(메모리의 백분율을 의미함)로 입력될 수 있습니다.</p>" -#. label text -#: src/modules/FileSystems.rb:311 +#. label text +#: src/modules/FileSystems.rb:311 msgid "Swap &Priority" msgstr "스왑 우선순위(&P)" -#. popup text -#: src/modules/FileSystems.rb:319 +#. popup text +#: src/modules/FileSystems.rb:319 msgid "Value must be between 0 and 32767. Try again." msgstr "값은 반드시 0에서 32767사이어야 합니다. 다시 시도하세요" -#. help text, richtext format -#: src/modules/FileSystems.rb:326 +#. help text, richtext format +#: src/modules/FileSystems.rb:326 msgid "" "<p><b>Swap Priority:</b>\n" "Enter the swap priority. Higher numbers mean higher priority.</p>\n" @@ -5414,45 +5310,43 @@ "<p><b>스왑 우선순위:</b>\n" "스왑 우선순위를 입력해 주세요. 높은 숫자가 높은 우선순위를 의미합니다.</p>\n" -#. button text -#: src/modules/FileSystems.rb:481 +#. button text +#: src/modules/FileSystems.rb:481 msgid "Mount &Read-Only" msgstr "읽기 전용 마운트(&R)" -#. help text, richtext format -#: src/modules/FileSystems.rb:485 +#. help text, richtext format +#: src/modules/FileSystems.rb:485 msgid "" "<p><b>Mount Read-Only:</b>\n" -"Writing to the file system is not possible. Default is false. During " -"installation\n" +"Writing to the file system is not possible. Default is false. During installation\n" "the file system is always mounted read-write.</p>" msgstr "" "<p><b>읽기 전용 마운트:</b>\n" "파일 시스템에 쓸 수 없습니다. 기본값은 false입니다. 설치 중\n" "파일 시스템은 항상 읽기/쓰기로 마운트됩니다.</p>" -#. button text -#: src/modules/FileSystems.rb:497 +#. button text +#: src/modules/FileSystems.rb:497 msgid "No &Access Time" msgstr "액세스 시간 없음(&A)" -#. help text, richtext format -#: src/modules/FileSystems.rb:501 +#. help text, richtext format +#: src/modules/FileSystems.rb:501 msgid "" "<p><b>No Access Time:</b>\n" "Access times are not updated when a file is read. Default is false.</p>\n" msgstr "" "<p><b>액세스 시간 없음:</b>\n" -"파일을 읽을 때 액세스 시간이 업데이트되지 않습니다. 기본값은 false입니다.\n" +"파일을 읽을 때 액세스 시간이 업데이트되지 않습니다. 기본값은 false입니다.</p>\n" -#. button text -#: src/modules/FileSystems.rb:511 +#. button text +#: src/modules/FileSystems.rb:511 msgid "Mountable by User" msgstr "사용자가 마운트 가능" -#. help text, richtext format -#: src/modules/FileSystems.rb:515 +#. help text, richtext format +#: src/modules/FileSystems.rb:515 msgid "" "<p><b>Mountable by User:</b>\n" "The file system may be mounted by an ordinary user. Default is false.</p>\n" @@ -5460,21 +5354,19 @@ "<p><b>일반사용자에게 마운트 허용:</b>\n" "일반 사용자가 파일 시스템을 마운트 할수 있습니다. 기본값은 불가입니다.</p>\n" -#. button text -#: src/modules/FileSystems.rb:528 +#. button text +#: src/modules/FileSystems.rb:528 msgid "Do Not Mount at System &Start-up" msgstr "시스템이 시작할때 마운트를 하지 않습니다(&S)" -#. help text, richtext format -#: src/modules/FileSystems.rb:534 +#. help text, richtext format +#: src/modules/FileSystems.rb:534 msgid "" "<p><b>Do Not Mount at System Start-up:</b>\n" "The file system is not automatically mounted when the system starts.\n" "An entry in /etc/fstab is created and the file system is mounted\n" -"with the appropriate options when the command <tt>mount <mount point>\n" -"is entered (<mount point> is the directory to which the file system is " -"mounted). Default is false.</p>\n" +"with the appropriate options when the command <tt>mount <mount point></tt>\n" +"is entered (<mount point> is the directory to which the file system is mounted). Default is false.</p>\n" msgstr "" "<p><b>시스템 시작 시 마운트 안 함:</b>\n" "시스템을 시작할 때 파일 시스템은 자동으로 마운트되지 않습니다.\n" @@ -5483,13 +5375,13 @@ "<마운트 지점>은 파일 시스템이 마운트되는 디렉토리입니다.\n" "기본값은 false입니다.</p>\n" -#. button text -#: src/modules/FileSystems.rb:551 +#. button text +#: src/modules/FileSystems.rb:551 msgid "Enable &Quota Support" msgstr "할당량 지원 활성화(&Q)" -#. help text, richtext format -#: src/modules/FileSystems.rb:557 +#. help text, richtext format +#: src/modules/FileSystems.rb:557 msgid "" "<p><b>Enable Quota Support:</b>\n" "The file system is mounted with user quotas enabled.\n" @@ -5499,23 +5391,21 @@ "파일 시스템은 사용자 할당량을 활성화한 상태로 탑재됩니다.\n" "기본값은 false입니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:576 +#. label text +#: src/modules/FileSystems.rb:576 msgid "Data &Journaling Mode" msgstr "데이터 저널링 모드(&J)" -#. help text, richtext format -#: src/modules/FileSystems.rb:585 +#. help text, richtext format +#: src/modules/FileSystems.rb:585 msgid "" "<p><b>Data Journaling Mode:</b>\n" "Specifies the journaling mode for file data.\n" "<tt>journal</tt> -- All data is committed to the journal prior to being\n" "written into the main file system. Highest performance impact.<br>\n" "<tt>ordered</tt> -- All data is forced directly out to the main file system\n" -"prior to its metadata being committed to the journal. Medium performance " -"impact.<br>\n" -"<tt>writeback</tt> -- Data ordering is not preserved. No performance impact." -"</p>\n" +"prior to its metadata being committed to the journal. Medium performance impact.<br>\n" +"<tt>writeback</tt> -- Data ordering is not preserved. No performance impact.</p>\n" msgstr "" "<p><b>데이터 저널링 모드:</b>\n" "파일 데이터에 대한 저널링 모드를 지정합니다.\n" @@ -5523,16 +5413,15 @@ "저널에 커밋됩니다. 성능에 가장 큰 영향을 미칩니다.<br>\n" " <tt>ordered</tt> -- 모든 데이터는 메타 데이터가 저널에 커밋되기 전에\n" "직접 주 파일 시스템으로 전송됩니다. 성능에 중간 정도의 영향을 미칩니다.<br>\n" -"<tt>writeback</tt> -- 데이터 순서가 유지되지 않습니다. 성능에 영향을 미치지 " -"않습니다.</p>\n" +"<tt>writeback</tt> -- 데이터 순서가 유지되지 않습니다. 성능에 영향을 미치지 않습니다.</p>\n" -#. button text -#: src/modules/FileSystems.rb:606 +#. button text +#: src/modules/FileSystems.rb:606 msgid "&Access Control Lists (ACL)" msgstr "액세스 제어 목록 (&ACL)" -#. help text, richtext format -#: src/modules/FileSystems.rb:610 +#. help text, richtext format +#: src/modules/FileSystems.rb:610 msgid "" "<p><b>Access Control Lists (ACL):</b>\n" "Enable access control lists on the file system.</p>\n" @@ -5540,13 +5429,13 @@ "<p><b>액세스 제어 목록(ACL):</b>\n" "파일 시스템에 ACL을 활성화합니다.</p>\n" -#. button text -#: src/modules/FileSystems.rb:621 +#. button text +#: src/modules/FileSystems.rb:621 msgid "&Extended User Attributes" msgstr "확장된 사용자 속성(&E)" -#. help text, richtext format -#: src/modules/FileSystems.rb:625 +#. help text, richtext format +#: src/modules/FileSystems.rb:625 msgid "" "<p><b>Extended User Attributes:</b>\n" "Allow extended user attributes on the file system.</p>\n" @@ -5554,38 +5443,33 @@ "<p><b>확장된 사용자 속성:</b>\n" "파일 시스템에 확장된 사용자 속성을 사용할 수 있게 합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:642 +#. label text +#: src/modules/FileSystems.rb:642 msgid "Arbitrary Option &Value" msgstr "임의 옵션 값(&V)" -#: src/modules/FileSystems.rb:647 -msgid "" -"Invalid characters in arbitrary option value. Do not use spaces or tabs. Try " -"again." -msgstr "" -"임의 옵션 값에 잘못된 문자가 있습니다. 공백이나 탭을 사용하지 마십시오. 다시 " -"시도하십시오." +#: src/modules/FileSystems.rb:647 +msgid "Invalid characters in arbitrary option value. Do not use spaces or tabs. Try again." +msgstr "임의 옵션 값에 잘못된 문자가 있습니다. 공백이나 탭을 사용하지 마십시오. 다시 시도하십시오." -#. help text, richtext format -#: src/modules/FileSystems.rb:651 +#. help text, richtext format +#: src/modules/FileSystems.rb:651 msgid "" "<p><b>Arbitrary Option Value:</b>\n" -"In this field, type any legal mount option allowed in the fourth field of /" -"etc/fstab.\n" +"In this field, type any legal mount option allowed in the fourth field of /etc/fstab.\n" "Multiple options are separated by commas.</p>\n" msgstr "" "<p><b>임의의 옵션 값:</b>\n" "이 필드에서는 /etc/fstab의 4번째 필드에 적합한 마운트 옵션을 입력합니다.\n" " 옵션이 여러 개 있으면 쉼표로 구분하여 입력합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:668 +#. label text +#: src/modules/FileSystems.rb:668 msgid "Char&set for file names" msgstr "파일이름을 위한 문자셋(&S)" -#. help text, richtext format -#: src/modules/FileSystems.rb:689 +#. help text, richtext format +#: src/modules/FileSystems.rb:689 msgid "" "<p><b>Charset for File Names:</b>\n" "Set the charset used for display of file names in Windows partitions.</p>\n" @@ -5593,67 +5477,60 @@ "<p><b>파일이름을 위한 문자셋:</b>\n" "윈도우 파티션의 파일이름을 표시하기 위해 사용될 문자셋을 설정하십시오.</p>\n" -#. label text -#: src/modules/FileSystems.rb:700 +#. label text +#: src/modules/FileSystems.rb:700 msgid "Code&page for short FAT names" msgstr "간단한 FAT 이름을 위한 코드페이지(&P)" -#. help text, richtext format -#: src/modules/FileSystems.rb:706 +#. help text, richtext format +#: src/modules/FileSystems.rb:706 msgid "" "<p><b>Codepage for Short FAT Names:</b>\n" -"This codepage is used for converting to shortname characters on FAT file " -"systems.</p>\n" +"This codepage is used for converting to shortname characters on FAT file systems.</p>\n" msgstr "" "<p><b>짧은 FAT이름을 위한 코드페이지:</b>\n" -"이 코드 페이지는 FAT 파일 시스템의 짧은 이름 문자를 변환하기 위해 쓰입니다.\n" +"이 코드 페이지는 FAT 파일 시스템의 짧은 이름 문자를 변환하기 위해 쓰입니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:720 +#. label text +#: src/modules/FileSystems.rb:720 msgid "Number of &FATs" msgstr "FAT의 갯수(&F)" -#. help text, richtext format -#: src/modules/FileSystems.rb:726 +#. help text, richtext format +#: src/modules/FileSystems.rb:726 msgid "" "<p><b>Number of FATs:</b>\n" -"Specify the number of file allocation tables in the file system. The default " -"is 2.</p>" +"Specify the number of file allocation tables in the file system. The default is 2.</p>" msgstr "" "<p><b>FAT의 갯수:</b>\n" "파일 시스템의 파일 위치 테이블의 개수를 지정하세요. 기본값은 2 입니다.</p>" -#. label text -#: src/modules/FileSystems.rb:735 +#. label text +#: src/modules/FileSystems.rb:735 msgid "FAT &Size" msgstr "FAT 크기(&S)" -#. help text, richtext format -#: src/modules/FileSystems.rb:746 +#. help text, richtext format +#: src/modules/FileSystems.rb:746 msgid "" "<p><b>FAT Size:</b>\n" -"Specifies the type of file allocation tables used (12, 16, or 32-bit). If " -"auto is specified, YaST will automatically select the value most suitable " -"for the file system size.</p>\n" +"Specifies the type of file allocation tables used (12, 16, or 32-bit). If auto is specified, YaST will automatically select the value most suitable for the file system size.</p>\n" msgstr "" "<p><b>FAT 크기:</b>\n" -"사용된 파일 할당 테이블 유형(12, 16 또는 32비트)을 지정합니다. 자동이 지정된 " -"경우 YaST는 자동으로 파일 시스템 크기에 가장 적합한 값을 선택합니다.</p>\n" +"사용된 파일 할당 테이블 유형(12, 16 또는 32비트)을 지정합니다. 자동이 지정된 경우 YaST는 자동으로 파일 시스템 크기에 가장 적합한 값을 선택합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:755 +#. label text +#: src/modules/FileSystems.rb:755 msgid "Root &Dir Entries" msgstr "루트 디렉토리 엔트리(&D)" -#. popup text -#: src/modules/FileSystems.rb:763 +#. popup text +#: src/modules/FileSystems.rb:763 msgid "The minimum size for \"Root Dir Entries\" is 112. Try again." -msgstr "" -"\"루트 디렉토리 엔트리\"의 최소 크기는 112입니다. 다시 입력해 주십시오." +msgstr "\"루트 디렉토리 엔트리\"의 최소 크기는 112입니다. 다시 입력해 주십시오." -#. help text, richtext format -#: src/modules/FileSystems.rb:767 +#. help text, richtext format +#: src/modules/FileSystems.rb:767 msgid "" "<p><b>Root Dir Entries:</b>\n" "Select the number of entries available in the root directory.</p>\n" @@ -5661,69 +5538,58 @@ "<p><b>루트 디렉토리 엔트리:</b>\n" "루트 디렉토리의 유효한 엔트리 수를 선택합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:780 +#. label text +#: src/modules/FileSystems.rb:780 msgid "Hash &Function" msgstr "해시 기능(&F)" -#. help text, richtext format -#: src/modules/FileSystems.rb:787 +#. help text, richtext format +#: src/modules/FileSystems.rb:787 msgid "" "<p><b>Hash Function:</b>\n" -"This specifies the name of the hash function to use to sort the file names " -"in directories.</p>\n" +"This specifies the name of the hash function to use to sort the file names in directories.</p>\n" msgstr "" "<p><b>해시 기능:</b>\n" -"디렉토리의 파일 이름을 정렬하는 데 사용할 해시 기능의 이름을 지정합니다.\n" +"디렉토리의 파일 이름을 정렬하는 데 사용할 해시 기능의 이름을 지정합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:796 +#. label text +#: src/modules/FileSystems.rb:796 msgid "FS &Revision" msgstr "파일 시스템 수정(&R)" -#. help text, richtext format -#: src/modules/FileSystems.rb:803 +#. help text, richtext format +#: src/modules/FileSystems.rb:803 msgid "" "<p><b>FS Revision:</b>\n" -"This option defines the reiserfs format revision to use. '3.5' is for " -"backwards compatibility with kernels of the 2.2.x series. '3.6' is more " -"recent, but can only be used with kernel versions greater than or equal to " -"2.4.</p>\n" +"This option defines the reiserfs format revision to use. '3.5' is for backwards compatibility with kernels of the 2.2.x series. '3.6' is more recent, but can only be used with kernel versions greater than or equal to 2.4.</p>\n" msgstr "" "<p><b>파일 시스템 수정:</b>\n" -"이 옵션에서는 Reiser 파일 시스템 형식 수정을 정의합니다. '3.5' 버전은 2.2.x " -"시리즈의 커널과 호환됩니다. '3.6' 버전이 더 최신이지만 커널 버전 2.4.x 이상에" -"서만 사용 가능합니다.</p>\n" +"이 옵션에서는 Reiser 파일 시스템 형식 수정을 정의합니다. '3.5' 버전은 2.2.x 시리즈의 커널과 호환됩니다. '3.6' 버전이 더 최신이지만 커널 버전 2.4.x 이상에서만 사용 가능합니다.</p>\n" -#. label text -#. label text -#: src/modules/FileSystems.rb:816 src/modules/FileSystems.rb:980 +#. label text +#. label text +#: src/modules/FileSystems.rb:816 src/modules/FileSystems.rb:980 msgid "Block &Size in Bytes" msgstr "블록 크기(바이트)(&S)" -#. help text, richtext format -#: src/modules/FileSystems.rb:823 +#. help text, richtext format +#: src/modules/FileSystems.rb:823 msgid "" "<p><b>Block Size:</b>\n" -"Specify the size of blocks in bytes. Valid block size values are 512, 1024, " -"2048 and 4096 bytes per block. If auto is selected, the standard block size " -"of 4096 is used.</p>\n" +"Specify the size of blocks in bytes. Valid block size values are 512, 1024, 2048 and 4096 bytes per block. If auto is selected, the standard block size of 4096 is used.</p>\n" msgstr "" "<p><b>블록 크기:</b>\n" -"블록 크기(바이트)를 지정합니다. 블록당 유효한 블록 크기 값은 512, 1024, 2048 " -"및 4096바이트입니다. 자동을 선택하면 표준 블록 크기인 4096이 사용됩니다.\n" +"블록 크기(바이트)를 지정합니다. 블록당 유효한 블록 크기 값은 512, 1024, 2048 및 4096바이트입니다. 자동을 선택하면 표준 블록 크기인 4096이 사용됩니다.</p>\n" -#. label text -#. label text -#: src/modules/FileSystems.rb:832 src/modules/FileSystems.rb:1062 +#. label text +#. label text +#: src/modules/FileSystems.rb:832 src/modules/FileSystems.rb:1062 msgid "&Inode Size" msgstr "Inode 크기(&I)" -#. help text, richtext format -#. help text, richtext format -#: src/modules/FileSystems.rb:838 src/modules/FileSystems.rb:1068 +#. help text, richtext format +#. help text, richtext format +#: src/modules/FileSystems.rb:838 src/modules/FileSystems.rb:1068 msgid "" "<p><b>Inode Size:</b>\n" "This option specifies the inode size of the file system.</p>\n" @@ -5731,33 +5597,30 @@ "<p><b>Inode 크기:</b>\n" "이 옵션은 파일 시스템의 inode 크기를 지정합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:847 +#. label text +#: src/modules/FileSystems.rb:847 msgid "&Percentage of Inode Space" msgstr "Inode 공간 백분율(&P)" -#. help text, richtext format -#: src/modules/FileSystems.rb:875 +#. help text, richtext format +#: src/modules/FileSystems.rb:875 msgid "" "<p><b>Percentage of Inode Space:</b>\n" -"The option \"Percentage of Inode Space\" specifies the maximum percentage of " -"space in the file system that can be allocated to inodes.</p>\n" +"The option \"Percentage of Inode Space\" specifies the maximum percentage of space in the file system that can be allocated to inodes.</p>\n" msgstr "" "<p><b>Inode 공간 백분율:</b>\n" -"\"Inode 공간 백분율\" 옵션은 inode에 할당될 수 있는 파일 시스템 공간의 최대 " -"백분율을 지정합니다.</p>\n" +"\"Inode 공간 백분율\" 옵션은 inode에 할당될 수 있는 파일 시스템 공간의 최대 백분율을 지정합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:884 +#. label text +#: src/modules/FileSystems.rb:884 msgid "Inode &Aligned" msgstr "Inode 정렬(&A)" -#. help text, richtext format -#: src/modules/FileSystems.rb:890 +#. help text, richtext format +#: src/modules/FileSystems.rb:890 msgid "" "<p><b>Inode Aligned:</b>\n" -"The option \"Inode Aligned\" is used to specify whether inode allocation is " -"or\n" +"The option \"Inode Aligned\" is used to specify whether inode allocation is or\n" "is not aligned. By default inodes are aligned, which\n" "is usually more efficient than unaligned access.</p>\n" msgstr "" @@ -5766,13 +5629,13 @@ "기본적으로 inode가 정렬되며, 대부분 정렬되지 않은 inode보다\n" "효율성이 높습니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:920 +#. label text +#: src/modules/FileSystems.rb:920 msgid "&Log Size in Megabytes" msgstr "로그 크기(MB)(&L)" -#. popup text -#: src/modules/FileSystems.rb:929 +#. popup text +#: src/modules/FileSystems.rb:929 msgid "" "The \"Log Size\" value is incorrect.\n" "Enter a value greater than zero.\n" @@ -5780,30 +5643,28 @@ "\"로그 크기\" 값이 올바르지 않습니다.\n" "0보다 큰 값을 입력하십시오.\n" -#. xgettext: no-c-format -#. help text, richtext format -#: src/modules/FileSystems.rb:934 +#. xgettext: no-c-format +#. help text, richtext format +#: src/modules/FileSystems.rb:934 msgid "" "<p><b>Log Size</b>\n" -"Set the log size (in megabytes). If auto, the default is 40% of the " -"aggregate size.</p>\n" +"Set the log size (in megabytes). If auto, the default is 40% of the aggregate size.</p>\n" msgstr "" "<p><b>로그 크기</b>\n" -" 로그 크기(MB)를 설정합니다. 자동을 선택하면 기본적으로 전체 크기의 40%로 설" -"정됩니다.</p>\n" +" 로그 크기(MB)를 설정합니다. 자동을 선택하면 기본적으로 전체 크기의 40%로 설정됩니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:942 +#. label text +#: src/modules/FileSystems.rb:942 msgid "Invoke Bad Blocks List &Utility" msgstr "배드 블럭 리스트 도구 실행(&U)" -#. label text -#: src/modules/FileSystems.rb:956 +#. label text +#: src/modules/FileSystems.rb:956 msgid "Stride &Length in Blocks" msgstr "블록당 Stride 길이(&L)" -#. popup text -#: src/modules/FileSystems.rb:964 +#. popup text +#: src/modules/FileSystems.rb:964 msgid "" "The \"Stride Length in Blocks\" value is invalid.\n" "Select a value greater than 1.\n" @@ -5811,8 +5672,8 @@ "\"블록당 Stride 길이\" 값이 유효하지 않습니다.\n" "1보다 큰 값을 선택하십시오.\n" -#. help text, richtext format -#: src/modules/FileSystems.rb:968 +#. help text, richtext format +#: src/modules/FileSystems.rb:968 msgid "" "<p><b>Stride Length in Blocks:</b>\n" "Set RAID-related options for the file system. Currently, the only supported\n" @@ -5824,26 +5685,22 @@ "RAID 분할에 사용되는 블럭의 수를 정하는 'stride' 뿐입니다.\n" "</p>\n" -#. help text, richtext format -#: src/modules/FileSystems.rb:987 +#. help text, richtext format +#: src/modules/FileSystems.rb:987 msgid "" "<p><b>Block Size:</b>\n" -"Specify the size of blocks in bytes. Valid block size values are 1024, 2048, " -"and 4096 bytes per block. If auto is selected, the block size is determined " -"by the file system size and the expected use of the file system.</p>\n" +"Specify the size of blocks in bytes. Valid block size values are 1024, 2048, and 4096 bytes per block. If auto is selected, the block size is determined by the file system size and the expected use of the file system.</p>\n" msgstr "" "<p><b>블록 크기:</b>\n" -"블록 크기(바이트)를 지정합니다. 유효한 블록 크기는 블록당 1024, 2048, 4096바" -"이트입니다. 자동을 선택하면 블록 크기는 파일 시스템 크기와 용도에 따라 결정됩" -"니다.</p>\n" +"블록 크기(바이트)를 지정합니다. 유효한 블록 크기는 블록당 1024, 2048, 4096바이트입니다. 자동을 선택하면 블록 크기는 파일 시스템 크기와 용도에 따라 결정됩니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:996 +#. label text +#: src/modules/FileSystems.rb:996 msgid "Bytes per &Inode" msgstr "Inode당 바이트(&I)" -#. help text, richtext format -#: src/modules/FileSystems.rb:1002 +#. help text, richtext format +#: src/modules/FileSystems.rb:1002 msgid "" "<p><b>Bytes per Inode:</b> \n" "Specify the bytes to inode ratio. YaST creates an inode for every\n" @@ -5851,26 +5708,21 @@ "bytes-per-inode ratio, the fewer inodes will be created. Generally, this\n" "value should not be smaller than the block size of the file system, or else\n" "too many inodes will be created. It is not possible to expand the number of\n" -"inodes on a file system after its creation. So be sure to enter a " -"reasonable\n" +"inodes on a file system after its creation. So be sure to enter a reasonable\n" "value for this parameter.</p>\n" msgstr "" "<p><b>Inode당 바이트:</b>\n" -"Inode당 바이트 수를 지정합니다. YaST는 디스크 공간의 <inode당 바이트> " -"값으로 inode를 생성합니다. inode당 바이트 수가 클수록 inode 수는 줄어듭니" -"다.\n" -"일반적으로 파일 시스템의 블록 크기보다 작으면 너무 많은 inode가 생성되기 때문" -"에 블록 크기보다 큰 값을 사용해야 합니다.\n" -"파일 시스템이 생성된 후에는 inode 수를 늘릴 수 없기 때문에 이 파라미터에 대" -"한 적절한 값을 입력해야 합니다.</p>\n" +"Inode당 바이트 수를 지정합니다. YaST는 디스크 공간의 <inode당 바이트> 값으로 inode를 생성합니다. inode당 바이트 수가 클수록 inode 수는 줄어듭니다.\n" +"일반적으로 파일 시스템의 블록 크기보다 작으면 너무 많은 inode가 생성되기 때문에 블록 크기보다 큰 값을 사용해야 합니다.\n" +"파일 시스템이 생성된 후에는 inode 수를 늘릴 수 없기 때문에 이 파라미터에 대한 적절한 값을 입력해야 합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:1018 +#. label text +#: src/modules/FileSystems.rb:1018 msgid "Percentage of Blocks &Reserved for root" msgstr "루트용으로 예약된 블록 백분율(&R)" -#. popup text -#: src/modules/FileSystems.rb:1028 +#. popup text +#: src/modules/FileSystems.rb:1028 msgid "" "The \"Percentage of Blocks Reserved for root\" value is incorrect.\n" "Allowed are float numbers no larger than 99 (e.g. 0.5).\n" @@ -5878,26 +5730,19 @@ "\"루트용으로 예약된 블록 백분율\" 값이 올바르지 않습니다.\n" "99 이하의 부동 숫자를 사용할 수 있습니다(예: 0.5).\n" -#. xgettext: no-c-format -#. help text, richtext format -#: src/modules/FileSystems.rb:1033 -msgid "" -"<p><b>Percentage of Blocks Reserved for root:</b> Specify the percentage of " -"blocks reserved for the super user. The default is computed so that normally " -"1 Gig is reserved. Upper limit for reserved default is 5.0, lowest reserved " -"default is 0.1.</p>" -msgstr "" -"<p><b>루트용으로 예약된 블록 백분율:</b> 수퍼유저에 사용하도록 예약된 블록의 " -"백분율을 지정합니다. 일반적으로 1Gb가 예약되도록 기본값이 계산됩니다. 예약된 " -"기본값의 상한은 5.0이고 예약된 기본값의 하한은 0.1입니다.</p>" +#. xgettext: no-c-format +#. help text, richtext format +#: src/modules/FileSystems.rb:1033 +msgid "<p><b>Percentage of Blocks Reserved for root:</b> Specify the percentage of blocks reserved for the super user. The default is computed so that normally 1 Gig is reserved. Upper limit for reserved default is 5.0, lowest reserved default is 0.1.</p>" +msgstr "<p><b>루트용으로 예약된 블록 백분율:</b> 수퍼유저에 사용하도록 예약된 블록의 백분율을 지정합니다. 일반적으로 1Gb가 예약되도록 기본값이 계산됩니다. 예약된 기본값의 상한은 5.0이고 예약된 기본값의 하한은 0.1입니다.</p>" -#. checkbox text -#: src/modules/FileSystems.rb:1042 +#. checkbox text +#: src/modules/FileSystems.rb:1042 msgid "Disable Regular Checks" msgstr "일반 검사 사용 안 함" -#. help text, richtext format -#: src/modules/FileSystems.rb:1050 +#. help text, richtext format +#: src/modules/FileSystems.rb:1050 msgid "" "<p><b>Disable Regular Checks:</b>\n" "Disable regular file system check at booting.</p>\n" @@ -5905,45 +5750,43 @@ "<p><b>일반 검사 사용 안 함:</b>\n" "부팅 시 일반 파일 시스템 검사를 사용하지 않습니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:1077 +#. label text +#: src/modules/FileSystems.rb:1077 msgid "&Directory Index Feature" msgstr "디렉토리 인덱스 기능(&D)" -#. help text, richtext format -#: src/modules/FileSystems.rb:1084 +#. help text, richtext format +#: src/modules/FileSystems.rb:1084 msgid "" "<p><b>Directory Index:</b>\n" "Enables use of hashed b-trees to speed up lookups in large directories.</p>\n" msgstr "" "<p><b>디렉토리 인덱스:</b>\n" -"대형 디렉토리의 검색 속도를 높이기 위해 b-tree라는 해시 기능을 활성화합니다." -"</p>\n" +"대형 디렉토리의 검색 속도를 높이기 위해 b-tree라는 해시 기능을 활성화합니다.</p>\n" -#. label text -#: src/modules/FileSystems.rb:1096 +#. label text +#: src/modules/FileSystems.rb:1096 msgid "&No Journal" msgstr "저널 없음(&N)" -#. help text, richtext format -#: src/modules/FileSystems.rb:1103 +#. help text, richtext format +#: src/modules/FileSystems.rb:1103 msgid "" "<p><b>No Journal:</b>\n" -"Suppressed use of journaling on filesystem. Only activate this when you " -"really\n" +"Suppressed use of journaling on filesystem. Only activate this when you really\n" "know what you are doing.</p>\n" msgstr "" "<p><b>저널 없음:</b>\n" "파일 시스템에서 저널링 사용을 억제했습니다. 확실한 경우에만\n" "이 옵션을 활성화하십시오.</p>\n" -#. this version makes some problems with interpreter, above lookup/add is OK -#: src/modules/Partitions.rb:937 +#. this version makes some problems with interpreter, above lookup/add is OK +#: src/modules/Partitions.rb:937 msgid "Operation not permitted on disk %{device}.\n" msgstr "%{device} 디스크에서 허용되지 않는 작업입니다.\n" -#. popup text %{device} is replaced by disk name e.g. /dev/hda -#: src/modules/Partitions.rb:942 +#. popup text %{device} is replaced by disk name e.g. /dev/hda +#: src/modules/Partitions.rb:942 msgid "" "\n" "It's not supported by the partitioning tool parted to change\n" @@ -5963,8 +5806,8 @@ "마운트 지점을 할당할 수 있습니다. 그러나 여기서\n" "해당 디스크의 파티션을 추가, 크기 변경 또는 제거할 수 없습니다.\n" -#. popup text %{device} is replaced by disk name e.g. /dev/hda -#: src/modules/Partitions.rb:954 +#. popup text %{device} is replaced by disk name e.g. /dev/hda +#: src/modules/Partitions.rb:954 msgid "" "\n" "The partitioning on your disk %{device} is either not readable or not \n" @@ -5984,8 +5827,8 @@ "마운트 지점을 할당할 수 있습니다. 그러나 여기서\n" "해당 디스크의 파티션을 추가, 편집,크기 변경 또는 제거할 수 없습니다.\n" -#. popup text %{device} is replaced by disk name e.g. /dev/dasda -#: src/modules/Partitions.rb:966 +#. popup text %{device} is replaced by disk name e.g. /dev/dasda +#: src/modules/Partitions.rb:966 msgid "" "\n" "The disk %{device} does not contain a partition table but for\n" @@ -6002,12 +5845,11 @@ "파티션을 생성했습니다.\n" "\n" "%{device} 디스크의 파티션을 있는 그대로 사용하거나,\n" -"포맷한 다음 마운트 지점을 할당할 수 있습니다. 그러나 여기서 해당 디스크의 파" -"티션 크기를 변경하거나\n" +"포맷한 다음 마운트 지점을 할당할 수 있습니다. 그러나 여기서 해당 디스크의 파티션 크기를 변경하거나\n" "제거할 수 없습니다.\n" -#. popup text -#: src/modules/Partitions.rb:982 +#. popup text +#: src/modules/Partitions.rb:982 msgid "" "\n" "\n" @@ -6021,8 +5863,8 @@ "디스크 파티션 테이블을 정상적인 상태로 초기화할 수 있습니다.\n" "그러나 이렇게 하면 이 디스크의 모든 파티션에 있는 데이터가 모두 삭제됩니다.\n" -#. popup text -#: src/modules/Partitions.rb:992 +#. popup text +#: src/modules/Partitions.rb:992 msgid "" "\n" "\n" @@ -6034,26 +5876,26 @@ "설치하는 동안 이 디스크를 사용하려고 생각하지 않는다면 안전하게\n" "이 메시지를 무시하십시오.\n" -#. Returns map of free space per partition -#. -#. @param [String] device -#. @param integer testsize -#. @param [Symbol] used_fs -#. @param [Boolean] verbose -#: src/modules/Storage.rb:994 +#. Returns map of free space per partition +#. +#. @param [String] device +#. @param integer testsize +#. @param [Symbol] used_fs +#. @param [Boolean] verbose +#: src/modules/Storage.rb:994 msgid "Resize Not Possible:" msgstr "크기를 조정할 수 없습니다." -#. Sets a new size for volume -#. -#. @param [String] device name -#. @param [String] disk -#. @param integer new_size (in kBytes) -#. @return [Boolean] if successful -#. mark swap-partitions with pseudo Mountpoint swap in targetMap -#. @param [Hash{String => map}] target Disk map -#. @return [Hash{String => map}] modified target -#: src/modules/Storage.rb:2697 src/modules/Storage.rb:3920 +#. Sets a new size for volume +#. +#. @param [String] device name +#. @param [String] disk +#. @param integer new_size (in kBytes) +#. @return [Boolean] if successful +#. mark swap-partitions with pseudo Mountpoint swap in targetMap +#. @param [Hash{String => map}] target Disk map +#. @return [Hash{String => map}] modified target +#: src/modules/Storage.rb:2697 src/modules/Storage.rb:3920 msgid "" "Could not set encryption.\n" "System error code is %1.\n" @@ -6065,8 +5907,8 @@ " \n" " 제공한 암호화 비밀번호가 올바르지 않을 수 있습니다.\n" -#. popup text -#: src/modules/Storage.rb:3951 +#. popup text +#: src/modules/Storage.rb:3951 msgid "" "The first and the second version\n" "of the password do not match.\n" @@ -6076,8 +5918,8 @@ "입력한 비밀번호가 다릅니다.\n" "다시 시도하십시오." -#. popup text -#: src/modules/Storage.rb:3982 +#. popup text +#: src/modules/Storage.rb:3982 msgid "" "The password may only contain the following characters:\n" "0..9, a..z, A..Z, and any of \"@#* ,.;:._-+=!$%&/|?{[()]}^\\<>\".\n" @@ -6087,26 +5929,26 @@ "0..9, a..z, A..Z 및 \"@#* ,.;:._-+=!$%&/|?{[()]}^\\<>\"\n" "다시 시도하십시오." -#. Label: get password for encrypted volume -#. Please use newline if label is longer than 40 characters -#: src/modules/Storage.rb:4036 +#. Label: get password for encrypted volume +#. Please use newline if label is longer than 40 characters +#: src/modules/Storage.rb:4036 msgid "&Enter Encryption Password:" msgstr "암호화 비밀번호 입력(&E)" -#. Clear password fields on every round. -#: src/modules/Storage.rb:4095 +#. Clear password fields on every round. +#: src/modules/Storage.rb:4095 msgid "Provide Password" msgstr "비밀번호 제공" -#: src/modules/Storage.rb:4114 +#: src/modules/Storage.rb:4114 msgid "The following encrypted volumes are already available." msgstr "암호화된 다음 볼륨은 이미 사용할 수 있습니다." -#: src/modules/Storage.rb:4129 +#: src/modules/Storage.rb:4129 msgid "Encrypted Volume Activation" msgstr "암호화된 볼륨 활성화" -#: src/modules/Storage.rb:4133 +#: src/modules/Storage.rb:4133 msgid "" "The following volumes contain an encryption signature but the \n" "passwords are not yet known.\n" @@ -6118,12 +5960,12 @@ "업데이트 도중 볼륨이 필요하거나 또는 볼륨에 암호화된 \n" "LVM 실제 볼륨이 있는 경우 비밀번호를 알고 있어야 합니다." -#: src/modules/Storage.rb:4145 +#: src/modules/Storage.rb:4145 msgid "Do you want to provide encryption passwords?" msgstr "암호화 비밀번호를 제공하시겠습니까?" -#. text in help field -#: src/modules/Storage.rb:4202 +#. text in help field +#: src/modules/Storage.rb:4202 msgid "" "Enter encryption password for any of the\n" "devices in the locked devices list.\n" @@ -6133,71 +5975,70 @@ "비밀번호를 입력하십시오.\n" "모든 장치에 대해 비밀번호가 입력됩니다." -#. header text -#: src/modules/Storage.rb:4208 +#. header text +#: src/modules/Storage.rb:4208 msgid "Enter Encryption Password" msgstr "암호화 비밀번호 입력" -#: src/modules/Storage.rb:4211 +#: src/modules/Storage.rb:4211 msgid "There are no encrypted volume to unlock." msgstr "잠금 해제할 암호화된 볼륨이 없습니다." -#. label text, multiple device names follow -#: src/modules/Storage.rb:4224 +#. label text, multiple device names follow +#: src/modules/Storage.rb:4224 msgid "Provide password for any of the following devices:" msgstr "다음 장치 중 하나에 대한 비밀번호를 제공하십시오." -#. label text, one device name follows -#: src/modules/Storage.rb:4227 +#. label text, one device name follows +#: src/modules/Storage.rb:4227 msgid "Provide password for the following device:" msgstr "다음 장치에 대한 비밀번호를 제공하십시오." -#: src/modules/Storage.rb:4240 +#: src/modules/Storage.rb:4240 msgid "Trying to unlock encrypted volumes..." msgstr "암호화된 볼륨의 잠금 해제를 시도하는 중..." -#: src/modules/Storage.rb:4264 +#: src/modules/Storage.rb:4264 msgid "Password did not unlock any volume." msgstr "비밀번호가 볼륨을 잠금 해제하지 않았습니다." -#: src/modules/Storage.rb:4350 +#: src/modules/Storage.rb:4350 msgid "IDE Disk" msgstr "IDE 디스크" -#: src/modules/Storage.rb:4356 +#: src/modules/Storage.rb:4356 msgid "SCSI Disk" msgstr "SCSI 디스크" -#: src/modules/Storage.rb:4362 +#: src/modules/Storage.rb:4362 msgid "Disk" msgstr "디스크" -#: src/modules/Storage.rb:4390 +#: src/modules/Storage.rb:4390 msgid "DM RAID" msgstr "DM RAID" -#: src/modules/Storage.rb:4403 +#: src/modules/Storage.rb:4403 msgid "MD RAID" msgstr "MD RAID" -#. TODO: more informative error message, but the Package module does -#. not provide anything -#. TRANSLATORS: error popup -#: src/modules/Storage.rb:4898 +#. TODO: more informative error message, but the Package module does +#. not provide anything +#. TRANSLATORS: error popup +#: src/modules/Storage.rb:4898 msgid "Installing required packages failed." msgstr "요구된 패키지의 설치에 실패했습니다." -#: src/modules/Storage.rb:4899 src/modules/StorageClients.rb:159 +#: src/modules/Storage.rb:4899 src/modules/StorageClients.rb:159 msgid "Continue despite the error?" msgstr "오류를 무시하고 계속하시겠습니까?" -#. TRANSLATORS: error popup -#: src/modules/Storage.rb:5238 -msgid "" -"Partitions cannot be created since other partitions on the disk are used." +#. TRANSLATORS: error popup +#: src/modules/Storage.rb:5238 +msgid "Partitions cannot be created since other partitions on the disk are used." msgstr "디스크의 다른 파티션이 사용되고 있으므로 파티션을 생성할 수 없습니다." -#: src/modules/Storage.rb:5264 +#: src/modules/Storage.rb:5264 msgid "" "\n" "Device %1 cannot be modified because it contains activated swap\n" @@ -6207,7 +6048,7 @@ "%1 장치에는 설치에 필요한 활성 스왑이 포함되어 있기 때문에\n" "이 장치를 수정할 수 없습니다.\n" -#: src/modules/Storage.rb:5278 +#: src/modules/Storage.rb:5278 msgid "" "\n" "Device %1 cannot be modified because it contains the installation\n" @@ -6217,7 +6058,7 @@ "%1 장치에는 설치에 필요한 설치 데이터가 포함되어 있기 때문에\n" "이 장치를 수정할 수 없습니다.\n" -#: src/modules/Storage.rb:5307 +#: src/modules/Storage.rb:5307 msgid "" "\n" "Device %1 cannot be removed because it contains activated swap\n" @@ -6227,7 +6068,7 @@ "%1 장치에는 설치에 필요한 활성 스왑이 포함되어 있기 때문에\n" "이 장치를 제거할 수 없습니다.\n" -#: src/modules/Storage.rb:5316 +#: src/modules/Storage.rb:5316 msgid "" "\n" "Device %1 cannot be removed because it contains the installation\n" @@ -6237,7 +6078,7 @@ "%1 장치에는 설치에 필요한 설치 데이터가 포함되어 있기 때문에\n" "이 장치를 제거할 수 없습니다.\n" -#: src/modules/Storage.rb:5345 +#: src/modules/Storage.rb:5345 msgid "" "\n" "Device %1 cannot be removed because this would indirectly change\n" @@ -6249,7 +6090,7 @@ "간접적으로 변경되므로\n" "제거할 수 없습니다.\n" -#: src/modules/Storage.rb:5356 +#: src/modules/Storage.rb:5356 msgid "" "\n" "Device %1 cannot be removed because this would indirectly change\n" @@ -6260,8 +6101,8 @@ "간접적으로 변경되므로\n" "제거할 수 없습니다.\n" -#. the check for verbose is needed for calls from StorageProposal (see bnc#871779) -#: src/modules/Storage.rb:5378 +#. the check for verbose is needed for calls from StorageProposal (see bnc#871779) +#: src/modules/Storage.rb:5378 msgid "" "\n" "Partition %1 cannot be removed since other partitions on the\n" @@ -6271,114 +6112,114 @@ "%1 파티션은 %2 디스크에서 다른 파티션이 사용되고 있으므로\n" "제거할 수 없습니다.\n" -#. FIXME: please, add description of the list that is returned by this function. -#: src/modules/Storage.rb:5467 +#. FIXME: please, add description of the list that is returned by this function. +#: src/modules/Storage.rb:5467 msgid "Nothing assigned as root filesystem!" msgstr "루트 파일 시스템으로 할당된 항목이 없습니다." -#: src/modules/Storage.rb:5468 +#: src/modules/Storage.rb:5468 msgid "Installation will most certainly fail fatally!" msgstr "대부분 설치가 실패합니다." -#. Set rather than Add, there might be some packs left over -#. from previous 'MakeProposal' we don't need now -#. This also covers the case when AddPackagesList returns [] or nil -#: src/modules/Storage.rb:6018 +#. Set rather than Add, there might be some packs left over +#. from previous 'MakeProposal' we don't need now +#. This also covers the case when AddPackagesList returns [] or nil +#: src/modules/Storage.rb:6018 msgid "Adding the following resolvables failed: %1" msgstr "다음 resolvable을 추가하지 못했습니다. %1" -#. hack: assume every text change means another action -#: src/modules/StorageClients.rb:139 +#. hack: assume every text change means another action +#: src/modules/StorageClients.rb:139 msgid "Failure occurred during the following action:" msgstr "다음 작업 도중 오류가 발생했습니다." -#: src/modules/StorageClients.rb:151 +#: src/modules/StorageClients.rb:151 msgid "System error code was: %1" msgstr "시스템 오류 코드: %1" -#. Label: get password for device -#. Please use newline if label is longer than 40 characters -#: src/modules/StorageClients.rb:199 +#. Label: get password for device +#. Please use newline if label is longer than 40 characters +#: src/modules/StorageClients.rb:199 msgid "&Enter Password for Device %1:" msgstr "장치 %1의 비밀번호 입력(&E):" -#. human text for Boolean value -#: src/modules/StorageFields.rb:86 +#. human text for Boolean value +#: src/modules/StorageFields.rb:86 msgid "Yes" msgstr "확인" -#. human text for Boolean value -#: src/modules/StorageFields.rb:89 +#. human text for Boolean value +#: src/modules/StorageFields.rb:89 msgid "No" msgstr "취소" -#. Column header, abbreviation for "format" (to format a partition) -#: src/modules/StorageFields.rb:135 +#. Column header, abbreviation for "format" (to format a partition) +#: src/modules/StorageFields.rb:135 msgid "F" msgstr "F" -#. Column header, , abbreviation for "encrypted" (an encrypted device) -#: src/modules/StorageFields.rb:138 +#. Column header, , abbreviation for "encrypted" (an encrypted device) +#: src/modules/StorageFields.rb:138 msgid "Enc" msgstr "암호화됨" -#. Column header, abbreviation for "Filesystem Type" -#: src/modules/StorageFields.rb:141 +#. Column header, abbreviation for "Filesystem Type" +#: src/modules/StorageFields.rb:141 msgid "FS Type" msgstr "FS 형식" -#. Column header -#: src/modules/StorageFields.rb:153 +#. Column header +#: src/modules/StorageFields.rb:153 msgid "Start" msgstr "시작" -#. Column header -#: src/modules/StorageFields.rb:156 +#. Column header +#: src/modules/StorageFields.rb:156 msgid "End" msgstr "종료" -#. Column header -#: src/modules/StorageFields.rb:159 +#. Column header +#: src/modules/StorageFields.rb:159 msgid "FS ID" msgstr "FS ID" -#. Column header -#: src/modules/StorageFields.rb:177 +#. Column header +#: src/modules/StorageFields.rb:177 msgid "Disk Label" msgstr "디스크 레이블" -#. Column header -#: src/modules/StorageFields.rb:180 +#. Column header +#: src/modules/StorageFields.rb:180 msgid "Metadata" msgstr "메타 데이터" -#. Column header, abbreviation for "Physical Extent" -#: src/modules/StorageFields.rb:183 +#. Column header, abbreviation for "Physical Extent" +#: src/modules/StorageFields.rb:183 msgid "PE Size" msgstr "PE 크기" -#. Column header -#: src/modules/StorageFields.rb:189 +#. Column header +#: src/modules/StorageFields.rb:189 msgid "RAID Version" msgstr "RAID 버전" -#. Column header -#: src/modules/StorageFields.rb:198 +#. Column header +#: src/modules/StorageFields.rb:198 msgid "Parity Algorithm" msgstr "패리티 알고리즘" -#. Column header -#: src/modules/StorageFields.rb:201 +#. Column header +#: src/modules/StorageFields.rb:201 msgid "Vendor" msgstr "제조업체" -#. Column header -#: src/modules/StorageFields.rb:204 +#. Column header +#: src/modules/StorageFields.rb:204 msgid "Model" msgstr "모델" -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:223 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:223 msgid "" "<b>BIOS ID</b> shows the BIOS ID of the hard\n" "disk. This field can be empty." @@ -6386,8 +6227,8 @@ "<b>BIOS ID</b>는 하드 디스크의 BIOS ID를 보여 줍니다.\n" "이 필드는 비워둘 수 없습니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:231 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:231 msgid "" "<b>Bus</b> shows how the device is connected to\n" "the system. This field can be empty, e.g. for multipath disks." @@ -6395,8 +6236,8 @@ "<b>버스</b>는 장치가 시스템에 연결되는 방식을 보여 줍니다.\n" "이 필드는 비워둘 수 없습니다(예: 다중 경로 디스크에 대해)." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:239 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:239 msgid "" "<b>Chunk Size</b> shows the chunk size for RAID\n" "devices." @@ -6404,8 +6245,8 @@ "<b>청크 크기</b>는 RAID 장치에 대한\n" "청크 크기를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:245 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:245 msgid "" "<b>Cylinder Size</b> shows the size of the\n" "cylinders of the hard disk." @@ -6413,8 +6254,8 @@ "<b>실린더 크기</b>는 하드 디스크의 실린더\n" "크기를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:253 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:253 msgid "" "<b>Sector Size</b> shows the size of the\n" "sectors of the hard disk." @@ -6422,8 +6263,8 @@ "<b>섹터 크기</b>는 하드 디스크의 섹터\n" "크기를 나타냅니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:261 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:261 msgid "" "<b>Device</b> shows the kernel name of the\n" "device." @@ -6431,8 +6272,8 @@ "<b>장치</b>는 장치의 커널\n" "이름을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:267 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:267 msgid "" "<b>Disk Label</b> shows the partition table\n" "type of the disk, e.g <tt>MSDOS</tt> or <tt>GPT</tt>." @@ -6440,8 +6281,8 @@ "<b>디스크 레이블</b>은 디스크 의 파티션 테이블\n" "유형(예: <tt>MSDOS</tt> 또는 <tt>GPT</tt>)을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:275 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:275 msgid "" "<b>Encrypted</b> shows whether the device is\n" "encrypted." @@ -6449,8 +6290,8 @@ "<b>암호화됨</b>은 장치가 암호화되었는지\n" "여부를 보여줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:281 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:281 msgid "" "<b>End Cylinder</b> shows the end cylinder of\n" "the partition." @@ -6458,8 +6299,8 @@ "<b>끝 실린더</b>는 파티션의 끝 실린더를\n" "보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:287 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:287 msgid "" "<b>LUN</b> shows the Logical Unit Number for\n" "Fibre Channel disks." @@ -6467,8 +6308,8 @@ "<b>LUN</b>은 파이버 채널 디스크의 논리적 단위\n" "번호를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:295 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:295 msgid "" "<b>Port ID</b> shows the port id for Fibre\n" "Channel disks." @@ -6476,8 +6317,8 @@ "<b>포트 ID</b>는 파이버 채널 디스크의\n" "포트 ID를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:301 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:301 msgid "" "<b>WWPN</b> shows the World Wide Port Name for\n" "Fibre Channel disks." @@ -6485,8 +6326,8 @@ "<b>WWPN</b>은 파이버 채널 디스크의 World Wide\n" "포트 이름을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:309 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:309 msgid "" "<b>File Path</b> shows the path of the file for\n" "an encrypted loop device." @@ -6494,8 +6335,8 @@ "<b>파일 경로</b>는 암호화된 루프 장치의\n" "파일 경로를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:317 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:317 msgid "" "<b>Format</b> shows some flags: <tt>F</tt>\n" "means the device is selected to be formatted." @@ -6503,18 +6344,18 @@ "<b>형식</b>은 일부 플래그를 표시합니다. <tt>F</tt>는\n" "장치가 포맷을 위해 선택되었음을 의미합니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:323 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:323 msgid "<b>FS ID</b> shows the file system id." msgstr "<b>FS ID</b>는 파일 시스템 ID를 표시합니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:326 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:326 msgid "<b>FS Type</b> shows the file system type." msgstr "<b>FS 유형</b>은 파일 시스템 유형을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:331 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:331 msgid "" "<b>Label</b> shows the label of the file\n" "system." @@ -6522,8 +6363,8 @@ "<b>레이블</b>은 파일 시스템의\n" "레이블을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:337 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:337 msgid "" "<b>Metadata</b> shows the LVM metadata type for\n" "volume groups." @@ -6531,30 +6372,27 @@ "<b>메타 데이터</b>는 볼륨 그룹의 LVM 메타 데이터\n" "유형을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:341 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:341 msgid "<b>Model</b> shows the device model." msgstr "<b>모델</b>은 장치 모델을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:346 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:346 msgid "" "<b>Mount by</b> indicates how the file system\n" -"is mounted: (Kernel) by kernel name, (Label) by file system label, (UUID) " -"by\n" +"is mounted: (Kernel) by kernel name, (Label) by file system label, (UUID) by\n" "file system UUID, (ID) by device ID, and (Path) by device path.\n" msgstr "" -"<b>마운트 방법</b>은 파일 시스템이 마운트되는 방식을 나타냅니다. 즉, 커널 이" -"름(커널), 파일 시스템 레이블(레이블), \n" +"<b>마운트 방법</b>은 파일 시스템이 마운트되는 방식을 나타냅니다. 즉, 커널 이름(커널), 파일 시스템 레이블(레이블), \n" "파일 시스템 UUID(UUID), 장치 ID(ID), 장치 경로(경로) 기준을 나타냅니다.\n" -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:356 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:356 msgid "" "A question mark (?) indicates that\n" "the file system is not listed in <tt>/etc/fstab</tt>. It is either mounted\n" -"manually or by some automount system. When changing settings for this " -"volume\n" +"manually or by some automount system. When changing settings for this volume\n" "YaST will not update <tt>/etc/fstab</tt>.\n" msgstr "" "물음표(?)는 파일 시스템이\n" @@ -6562,8 +6400,8 @@ "또는 자동 마운트 시스템에 마운트됩니다. 이 볼륨의 설정을\n" "변경할 때 YaST는 <tt>/etc/fstab</tt>를 업데이트하지 않습니다.\n" -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:368 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:368 msgid "" "<b>Mount Point</b> shows where the file system\n" "is mounted." @@ -6571,20 +6409,18 @@ "<b>마운트 포인트</b>는 파일 시스템이 마운트된\n" "위치를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:374 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:374 msgid "" "An asterisk (*) after the mount point\n" -"indicates a file system that is currently not mounted (for example, because " -"it\n" +"indicates a file system that is currently not mounted (for example, because it\n" "has the <tt>noauto</tt> option set in <tt>/etc/fstab</tt>)." msgstr "" "마운트 포인트 뒤에 있는 별표(*)는 현재 마운트되지 않은\n" -"파일 시스템을 나타냅니다(예: <tt>/etc/fstab</tt>에 <tt>noauto</tt> 옵션이 설" -"정되었기 때문)." +"파일 시스템을 나타냅니다(예: <tt>/etc/fstab</tt>에 <tt>noauto</tt> 옵션이 설정되었기 때문)." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:385 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:385 msgid "" "<b>Number of Cylinders</b> shows how many\n" "cylinders the hard disk has." @@ -6592,8 +6428,8 @@ "<b>실린더 수</b>는 하드 디스크에 있는 실린더\n" "수를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:393 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:393 msgid "" "<b>Parity Algorithm</b> shows the parity\n" "algorithm for RAID devices with RAID type 5, 6 or 10." @@ -6601,8 +6437,8 @@ "<b>패리티 알고리즘</b>은 RAID 유형이 5, 6 또는 10인 RAID 장치에 대한\n" "패리티 알고리즘을 나타냅니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:401 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:401 msgid "" "<b>PE Size</b> shows the physical extent size\n" "for LVM volume groups." @@ -6610,13 +6446,13 @@ "<b>PE 크기</b>는 LVM 볼륨 그룹에 대한 실제\n" "범위 크기를 나타냅니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:407 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:407 msgid "<b>RAID Version</b> shows the RAID version." msgstr "<b>RAID 버전</b>은 RAID 버전을 나타냅니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:412 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:412 msgid "" "<b>RAID Type</b> shows the RAID type, also\n" "called RAID level, for RAID devices." @@ -6624,13 +6460,13 @@ "<b>RAID 유형</b>은 RAID 장치에 대해 RAID\n" "유형(RAID 레벨이라고도 함)을 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:418 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:418 msgid "<b>Size</b> shows the size of the device." msgstr "<b>크기</b>는 장치의 크기를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:423 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:423 msgid "" "<b>Start Cylinder</b> shows the start cylinder\n" "of the partition." @@ -6638,8 +6474,8 @@ "<b>시작 실린더</b>는 파티션의 시작\n" "실린더를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:431 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:431 msgid "" "<b>Stripes</b> shows the stripe number for LVM\n" "logical volumes and, if greater than one, the stripe size in parenthesis.\n" @@ -6647,8 +6483,8 @@ "<b>스트라이프</b>는 LVM 논리 볼륨의 스트라이프 수, 그리고\n" "이 값이 1보다 큰 경우 스트리아프 크기를 괄호로 묶어서 표시합니다.\n" -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:439 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:439 msgid "" "<b>Type</b> gives a general overview about the\n" "device type." @@ -6656,8 +6492,8 @@ "<b>유형</b>은 장치 유형에 대한 일반\n" "개요를 제공합니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:445 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:445 msgid "" "<b>Device ID</b> shows the persistent device\n" "IDs. This field can be empty.\n" @@ -6665,8 +6501,8 @@ "<b>장치 ID</b>는 영구 장치 ID를 표시합니다.\n" "이 필드는 비워둘 수 없습니다.\n" -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:453 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:453 msgid "" "<b>Device Path</b> shows the persistent device\n" "path. This field can be empty." @@ -6674,17 +6510,15 @@ "<b>장치 경로</b>는 영구 장치 경로를 보여 줍니다.\n" "이 필드는 비워둘 수 없습니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:461 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:461 msgid "" "<b>Used By</b> shows if a device is used by\n" "e.g. RAID or LVM. If not, this column is empty.\n" -msgstr "" -"<b>사용 대상</b>은 장치가 RAID 또는 LVM에서 사용되는 경우 표시됩니다. 그렇지 " -"않으면 이 열은 비어 있습니다.\n" +msgstr "<b>사용 대상</b>은 장치가 RAID 또는 LVM에서 사용되는 경우 표시됩니다. 그렇지 않으면 이 열은 비어 있습니다.\n" -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:469 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:469 msgid "" "<b>UUID</b> shows the Universally Unique\n" "Identifier of the file system." @@ -6692,236 +6526,236 @@ "<b>UUID</b>는 파일 시스템의 범용 고유 식별자(Universally Unique\n" "Identifier)를 보여 줍니다." -#. helptext for table column and overview entry -#: src/modules/StorageFields.rb:475 +#. helptext for table column and overview entry +#: src/modules/StorageFields.rb:475 msgid "<b>Vendor</b> shows the device vendor." msgstr "<b>제조업체</b>는 장치 제조업체를 보여 줍니다." -#. row label, %1 is replace by device name -#: src/modules/StorageFields.rb:504 +#. row label, %1 is replace by device name +#: src/modules/StorageFields.rb:504 msgid "Device: %1" msgstr "장치: %1" -#. row label, %1 is replace by size -#: src/modules/StorageFields.rb:512 +#. row label, %1 is replace by size +#: src/modules/StorageFields.rb:512 msgid "Size: %1" msgstr "크기: %1" -#. label text -#: src/modules/StorageFields.rb:548 +#. label text +#: src/modules/StorageFields.rb:548 msgid "DISK %1" msgstr "디스크 %1" -#. row label -#: src/modules/StorageFields.rb:570 +#. row label +#: src/modules/StorageFields.rb:570 msgid "Type: %1" msgstr "유형: %1" -#. row label -#: src/modules/StorageFields.rb:587 +#. row label +#: src/modules/StorageFields.rb:587 msgid "Format: %1" msgstr "형식: %1" -#. row label, %1 is replace by "Yes" or "No" -#: src/modules/StorageFields.rb:614 +#. row label, %1 is replace by "Yes" or "No" +#: src/modules/StorageFields.rb:614 msgid "Encrypted: %1" msgstr "암호화됨: %1" -#. row label, %1 is replace by file system name e.g. "Ext3" -#: src/modules/StorageFields.rb:627 +#. row label, %1 is replace by file system name e.g. "Ext3" +#: src/modules/StorageFields.rb:627 msgid "File System: %1" msgstr "파일 시스템: %1" -#. row label, %1 is replace by mount point e.g. "/mnt" -#: src/modules/StorageFields.rb:643 +#. row label, %1 is replace by mount point e.g. "/mnt" +#: src/modules/StorageFields.rb:643 msgid "Mount Point: %1" msgstr "마운트 포인트: %1" -#. row label, %1 is replace by mount by method -#: src/modules/StorageFields.rb:678 +#. row label, %1 is replace by mount by method +#: src/modules/StorageFields.rb:678 msgid "Mount by: %1" msgstr "마운트 방법: %1" -#: src/modules/StorageFields.rb:688 +#: src/modules/StorageFields.rb:688 msgid "Used by %1: %2" msgstr "%1에서 사용됨: %2" -#. row label, %1 is replace by file system uuid -#: src/modules/StorageFields.rb:704 +#. row label, %1 is replace by file system uuid +#: src/modules/StorageFields.rb:704 msgid "UUID: %1" msgstr "UUID: %1" -#. row label, %1 is replace by file system label -#: src/modules/StorageFields.rb:712 +#. row label, %1 is replace by file system label +#: src/modules/StorageFields.rb:712 msgid "Label: %1" msgstr "레이블: %1" -#. row label, %1 is replace by udev device path -#: src/modules/StorageFields.rb:720 +#. row label, %1 is replace by udev device path +#: src/modules/StorageFields.rb:720 msgid "Device Path: %1" msgstr "장치 경로: %1" -#: src/modules/StorageFields.rb:730 +#: src/modules/StorageFields.rb:730 msgid "Device ID %1: %2" msgstr "장치 ID %1: %2" -#. row label, %1 is replace by bios id -#: src/modules/StorageFields.rb:744 +#. row label, %1 is replace by bios id +#: src/modules/StorageFields.rb:744 msgid "BIOS ID: %1" msgstr "BIOS ID: %1" -#. row label, %1 is replace by disk label e.g. "MSDOS" or "GPT" -#: src/modules/StorageFields.rb:754 +#. row label, %1 is replace by disk label e.g. "MSDOS" or "GPT" +#: src/modules/StorageFields.rb:754 msgid "Disk Label: %1" msgstr "디스크 레이블: %1" -#. row label, %1 is replace by vendor name -#: src/modules/StorageFields.rb:762 +#. row label, %1 is replace by vendor name +#: src/modules/StorageFields.rb:762 msgid "Vendor: %1" msgstr "제조업체: %1" -#. row label, %1 is replace by model string -#: src/modules/StorageFields.rb:770 +#. row label, %1 is replace by model string +#: src/modules/StorageFields.rb:770 msgid "Model: %1" msgstr "모델: %1" -#. row label, %1 is replace by bus name e.g. "SCSI" -#: src/modules/StorageFields.rb:793 +#. row label, %1 is replace by bus name e.g. "SCSI" +#: src/modules/StorageFields.rb:793 msgid "Bus: %1" msgstr "버스: %1" -#. row label, %1 is replace by metadata version string -#: src/modules/StorageFields.rb:804 +#. row label, %1 is replace by metadata version string +#: src/modules/StorageFields.rb:804 msgid "Metadata: %1" msgstr "메타 데이터: %1" -#. row label, %1 is replace by size -#: src/modules/StorageFields.rb:817 +#. row label, %1 is replace by size +#: src/modules/StorageFields.rb:817 msgid "PE Size: %1" msgstr "PE 크기: %1" -#. row label, %1 is replace by integer -#: src/modules/StorageFields.rb:838 +#. row label, %1 is replace by integer +#: src/modules/StorageFields.rb:838 msgid "Stripes: %1" msgstr "분할: %1" -#. row label, %1 is replace by raid version e.g. "1.00" -#: src/modules/StorageFields.rb:846 +#. row label, %1 is replace by raid version e.g. "1.00" +#: src/modules/StorageFields.rb:846 msgid "RAID Version: %1" msgstr "RAID 버전: %1" -#. row label, %1 is replace by raid type e.g. "RAID1" -#: src/modules/StorageFields.rb:854 +#. row label, %1 is replace by raid type e.g. "RAID1" +#: src/modules/StorageFields.rb:854 msgid "RAID Type: %1" msgstr "RAID 형식: %1" -#. row label, %1 is replace by size -#: src/modules/StorageFields.rb:867 +#. row label, %1 is replace by size +#: src/modules/StorageFields.rb:867 msgid "Chunk Size: %1" msgstr "청크 크기: %1" -#. row label, %1 is replace by algorithm name -#: src/modules/StorageFields.rb:879 +#. row label, %1 is replace by algorithm name +#: src/modules/StorageFields.rb:879 msgid "Parity Algorithm: %1" msgstr "패리티 알고리즘: %1" -#. row label, %1 is replace by integer -#: src/modules/StorageFields.rb:890 +#. row label, %1 is replace by integer +#: src/modules/StorageFields.rb:890 msgid "Number of Cylinders: %1" msgstr "실린더 수: %1" -#. row label, %1 is replace by size -#: src/modules/StorageFields.rb:903 +#. row label, %1 is replace by size +#: src/modules/StorageFields.rb:903 msgid "Cylinder Size: %1" msgstr "실린더 크기: %1" -#. row label, %1 is replace by integer -#: src/modules/StorageFields.rb:920 +#. row label, %1 is replace by integer +#: src/modules/StorageFields.rb:920 msgid "Start Cylinder: %1" msgstr "시작 시간: %1" -#. row label, %1 is replace by integer -#: src/modules/StorageFields.rb:939 +#. row label, %1 is replace by integer +#: src/modules/StorageFields.rb:939 msgid "End Cylinder: %1" msgstr "끝 실린더: %1" -#. row label, %1 is replace by size -#: src/modules/StorageFields.rb:952 +#. row label, %1 is replace by size +#: src/modules/StorageFields.rb:952 msgid "Sector Size: %1" msgstr "섹터 크기: %1" -#. row label, %1 is replace by file system id -#: src/modules/StorageFields.rb:964 +#. row label, %1 is replace by file system id +#: src/modules/StorageFields.rb:964 msgid "FS ID: %1" msgstr "FS ID: %1" -#. row label, %1 is replace by file path e.g. "/data/secret" -#: src/modules/StorageFields.rb:973 +#. row label, %1 is replace by file path e.g. "/data/secret" +#: src/modules/StorageFields.rb:973 msgid "File Path: %1" msgstr "파일 경로: %1" -#. row label, %1 is replace by wwpn -#: src/modules/StorageFields.rb:997 +#. row label, %1 is replace by wwpn +#: src/modules/StorageFields.rb:997 msgid "WWPN: %1" msgstr "WWPN: %1" -#. row label, %1 is replace by lun -#: src/modules/StorageFields.rb:1010 +#. row label, %1 is replace by lun +#: src/modules/StorageFields.rb:1010 msgid "LUN: %1" msgstr "LUN: %1" -#. row label, %1 is replace by port id -#: src/modules/StorageFields.rb:1032 +#. row label, %1 is replace by port id +#: src/modules/StorageFields.rb:1032 msgid "Port ID: %1" msgstr "포트 ID: %1" -#. The predicate function determines whether the disk/partition is -#. included. The predicate function takes two arguments, disk and -#. partition. For disks predicate is called with the partitions set to -#. nil. -#. -#. Possible return values for predicate: -#. `show, `follow, `showandfollow, `ignore -#: src/modules/StorageFields.rb:1304 +#. The predicate function determines whether the disk/partition is +#. included. The predicate function takes two arguments, disk and +#. partition. For disks predicate is called with the partitions set to +#. nil. +#. +#. Possible return values for predicate: +#. `show, `follow, `showandfollow, `ignore +#: src/modules/StorageFields.rb:1304 msgid "<p>The table contains:</p>" msgstr "<p>테이블 내용:</p>" -#. heading -#: src/modules/StorageFields.rb:1356 +#. heading +#: src/modules/StorageFields.rb:1356 msgid "Device:" msgstr "장치:" -#. heading -#: src/modules/StorageFields.rb:1359 +#. heading +#: src/modules/StorageFields.rb:1359 msgid "File System:" msgstr "파일 시스템:" -#. heading -#: src/modules/StorageFields.rb:1362 +#. heading +#: src/modules/StorageFields.rb:1362 msgid "Hard Disk:" msgstr "하드 디스크:" -#. heading -#: src/modules/StorageFields.rb:1365 +#. heading +#: src/modules/StorageFields.rb:1365 msgid "Fibre Channel:" msgstr "파이버 채널:" -#. heading -#: src/modules/StorageFields.rb:1368 +#. heading +#: src/modules/StorageFields.rb:1368 msgid "LVM:" msgstr "LVM:" -#. heading -#: src/modules/StorageFields.rb:1371 +#. heading +#: src/modules/StorageFields.rb:1371 msgid "RAID:" msgstr "RAID:" -#: src/modules/StorageFields.rb:1414 +#: src/modules/StorageFields.rb:1414 msgid "<p>The overview contains:</p>" msgstr "<p>개요 내용:</p>" -#. error popup -#: src/modules/StorageInit.rb:91 +#. error popup +#: src/modules/StorageInit.rb:91 msgid "" "The storage subsystem is locked by an unknown application.\n" "You must quit that application before you can continue." @@ -6929,8 +6763,8 @@ "저장소 하위 시스템이 알 수 없는 응용 프로그램에 의해 잠겼습니다.\n" "계속하려면 먼저 해당 응용 프로그램을 종료해야 합니다." -#. error popup -#: src/modules/StorageInit.rb:105 +#. error popup +#: src/modules/StorageInit.rb:105 msgid "" "The storage subsystem is locked by the application \"%1\" (%2).\n" "You must quit that application before you can continue." @@ -6938,49 +6772,44 @@ "저장소 하위 시스템이 응용 프로그램 \"%1\"(%2)에 의해 잠겼습니다.\n" "계속하려면 먼저 해당 응용 프로그램을 종료해야 합니다." -#. bsc#983003 -#. penalty for not having separate /home -#: src/modules/StorageProposal.rb:4601 src/modules/StorageProposal.rb:5724 -msgid "" -"Resize impossible due to inconsistent file system. Try checking file system " -"under Windows." -msgstr "" -"일관성이 없는 파일 시스템으로 인해 크기를 변경할 수 없습니다. Windows에서 파" -"일 시스템을 확인해 보십시오." +#. bsc#983003 +#. penalty for not having separate /home +#: src/modules/StorageProposal.rb:4601 src/modules/StorageProposal.rb:5724 +msgid "Resize impossible due to inconsistent file system. Try checking file system under Windows." +msgstr "일관성이 없는 파일 시스템으로 인해 크기를 변경할 수 없습니다. Windows에서 파일 시스템을 확인해 보십시오." -#. TRANSLATORS: combobox label -#: src/modules/StorageProposal.rb:6239 +#. TRANSLATORS: combobox label +#: src/modules/StorageProposal.rb:6239 msgid "File System for Root Partition" msgstr "루트 파티션에 대한 파일 시스템" -#. TRANSLATORS: combobox label -#: src/modules/StorageProposal.rb:6286 +#. TRANSLATORS: combobox label +#: src/modules/StorageProposal.rb:6286 msgid "File System for Home Partition" msgstr "홈 파티션에 대한 파일 시스템" -#. TRANSLATORS: checkbox text -#: src/modules/StorageProposal.rb:6304 +#. TRANSLATORS: checkbox text +#: src/modules/StorageProposal.rb:6304 msgid "Enlarge &Swap for Suspend" msgstr "일시 중단을 위해 스왑 확대(&S)" -#: src/modules/StorageProposal.rb:6314 +#: src/modules/StorageProposal.rb:6314 msgid "Proposal Settings" msgstr "제안 설정" -#. TRANSLATORS: help text -#: src/modules/StorageProposal.rb:6329 +#. TRANSLATORS: help text +#: src/modules/StorageProposal.rb:6329 msgid "" "<p>Choose <b>Partition-based Proposal</b> if you don't want to use LVM.\n" "Choose <b>LVM-based Proposal</b> for plain LVM and <b>Encrypted LVM-based\n" "Proposal</b> if you want your system to be encrypted.</p>" msgstr "" "<p>LVM을 사용하지 않으려면 <b>파티션 기반 제안</b>을 선택하십시오.\n" -"일반 LVM을 사용하려면 <b>LVM 기반 제안</b>을 선택하고 시스템을 암호화하려면 " -"<b>암호화 LVM 기반\n" +"일반 LVM을 사용하려면 <b>LVM 기반 제안</b>을 선택하고 시스템을 암호화하려면 <b>암호화 LVM 기반\n" "제안</b>을 선택하십시오.</p>" -#. TRANSLATORS: help text -#: src/modules/StorageProposal.rb:6337 +#. TRANSLATORS: help text +#: src/modules/StorageProposal.rb:6337 msgid "" "<p>The filesystem for the root partition can be selected with the\n" "corresponding combo box. With the filesystem BtrFS the proposal can\n" @@ -6989,12 +6818,11 @@ msgstr "" "<p>해당 콤보 상자를 사용하여 루트 파티션에 대한 파일 시스템을\n" "선택할 수 있습니다. 파일 시스템 BtrFS를 사용하면 제안에서\n" -"스냅퍼를 통한 자동 스냅샷을 활성화할 수 있습니다. 그러면 루트 파티션의 크기" -"도\n" +"스냅퍼를 통한 자동 스냅샷을 활성화할 수 있습니다. 그러면 루트 파티션의 크기도\n" "증가합니다.</p>" -#. TRANSLATORS: help text -#: src/modules/StorageProposal.rb:6346 +#. TRANSLATORS: help text +#: src/modules/StorageProposal.rb:6346 msgid "" "<p>The proposal can create a separate home partition. The filesystem for\n" "the home partition can be selected with the corresponding combo box.</p>" @@ -7002,84 +6830,83 @@ "<p>제안에서 별도의 홈 파티션을 생성할 수 있습니다. 해당 콤보 상자를\n" "사용하여 홈 파티션에 대한 파일 시스템을 선택할 수 있습니다.</p>" -#. TRANSLATORS: help text -#: src/modules/StorageProposal.rb:6353 +#. TRANSLATORS: help text +#: src/modules/StorageProposal.rb:6353 msgid "" "<p>The swap partition can be made large enough to be used to suspend\n" "the system to disk in most cases.</p>" msgstr "" -"<p>대부분의 경우 시스템을 디스크에 일시 중단하는 데 사용할 수 있을 만큼 크" -"게\n" +"<p>대부분의 경우 시스템을 디스크에 일시 중단하는 데 사용할 수 있을 만큼 크게\n" "스왑 파티션을 만들 수 있습니다.</p>" -#: src/modules/StorageProposal.rb:6378 +#: src/modules/StorageProposal.rb:6378 msgid "Enter your password for the proposal encryption." msgstr "제안 암호화에 대한 비밀번호를 입력하십시오." -#. Label: get password for user root -#. Please use newline if label is longer than 40 characters -#: src/modules/StorageProposal.rb:6385 +#. Label: get password for user root +#. Please use newline if label is longer than 40 characters +#: src/modules/StorageProposal.rb:6385 msgid "Password:" msgstr "비밀번호:" -#. Label: get same password again for verification -#. Please use newline if label is longer than 40 characters -#: src/modules/StorageProposal.rb:6396 +#. Label: get same password again for verification +#. Please use newline if label is longer than 40 characters +#: src/modules/StorageProposal.rb:6396 msgid "Reenter the password for verification:" msgstr "확인을 위해 암호 다시 입력:" -#. Clear password fields on every round. -#: src/modules/StorageProposal.rb:6594 +#. Clear password fields on every round. +#: src/modules/StorageProposal.rb:6594 msgid "&Partition-based Proposal" msgstr "파티션 기반 제안(&P)" -#: src/modules/StorageProposal.rb:6596 +#: src/modules/StorageProposal.rb:6596 msgid "&LVM-based Proposal" msgstr "LVM 기반 제안 생성(&L)" -#: src/modules/StorageProposal.rb:6598 +#: src/modules/StorageProposal.rb:6598 msgid "&Encrypted LVM-based Proposal" msgstr "암호화된 LVM 기반 제안 생성(&E)" -#. encoding: utf-8 -#. Copyright (c) 2012 Novell, Inc. -#. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or modify it -#. under the terms of version 2 of the GNU General Public License as published -#. by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -#. more details. -#. -#. You should have received a copy of the GNU General Public License along -#. with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may -#. find current contact information at www.novell.com. -#. File: StorageSettings.ycp -#. Package: yast2-storage -#. Summary: Expert Partitioner -#. Authors: Arvin Schnell -#: src/modules/StorageSettings.rb:179 +#. encoding: utf-8 +#. Copyright (c) 2012 Novell, Inc. +#. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or modify it +#. under the terms of version 2 of the GNU General Public License as published +#. by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +#. FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +#. more details. +#. +#. You should have received a copy of the GNU General Public License along +#. with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may +#. find current contact information at www.novell.com. +#. File: StorageSettings.ycp +#. Package: yast2-storage +#. Summary: Expert Partitioner +#. Authors: Arvin Schnell +#: src/modules/StorageSettings.rb:179 msgid "Default Mount-by:" msgstr "기본 마운트 방법:" -#: src/modules/StorageSettings.rb:180 +#: src/modules/StorageSettings.rb:180 msgid "Default File System:" msgstr "기본 파일 시스템:" -#: src/modules/StorageSettings.rb:181 +#: src/modules/StorageSettings.rb:181 msgid "Show Storage Devices by:" msgstr "저장 장치 표시 방법:" -#: src/modules/StorageSettings.rb:182 +#: src/modules/StorageSettings.rb:182 msgid "Partition Alignment:" msgstr "파티션 정렬:" -#: src/modules/StorageSettings.rb:183 +#: src/modules/StorageSettings.rb:183 msgid "Visible Information on Storage Devices:" msgstr "저장 장치의 가시 정보:" Modified: branches/SLE12-SP3/yast/ko/po/sudo.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/sudo.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/sudo.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,37 +14,37 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xsudo module -#: src/clients/sudo.rb:54 +#. Command line help text for the Xsudo module +#: src/clients/sudo.rb:54 msgid "Configuration of sudo" msgstr "sudo 구성" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/sudo/complex.ycp -#. Package: Configuration of sudo -#. Summary: Dialogs definitions -#. Authors: Bubli -#. -#. $Id: complex.ycp 29363 2006-03-24 08:20:43Z mzugec $ -#: src/include/sudo/complex.rb:72 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/sudo/complex.ycp +#. Package: Configuration of sudo +#. Summary: Dialogs definitions +#. Authors: Bubli +#. +#. $Id: complex.ycp 29363 2006-03-24 08:20:43Z mzugec $ +#: src/include/sudo/complex.rb:72 msgid "" "A valid netmask is either in dotted quad notation \n" "(4 integers in the range 128 - 255 separated by dots) \n" @@ -54,312 +54,308 @@ "그룹(128 - 255 범위)이거나 0 - 32 범위의 단일\n" "정수입니다." -#: src/include/sudo/complex.rb:95 +#: src/include/sudo/complex.rb:95 msgid "Add New Host to the Alias" msgstr "별칭에 새 호스트 추가" -#: src/include/sudo/complex.rb:99 +#: src/include/sudo/complex.rb:99 msgid "Hostname or Network" msgstr "호스트 이름 또는 네트워크" -#: src/include/sudo/complex.rb:136 +#: src/include/sudo/complex.rb:136 msgid "Add New User to the Alias" msgstr "별칭에 새 사용자 추가" -#: src/include/sudo/complex.rb:142 +#: src/include/sudo/complex.rb:142 msgid "Local and System Users (Groups)" msgstr "로컬 및 시스템 사용자(그룹)" -#: src/include/sudo/complex.rb:176 +#: src/include/sudo/complex.rb:176 msgid "File, directory or command alias '%1' does not exist." msgstr "파일, 디렉토리 또는 '%1' 명령 별칭이 없습니다." -#: src/include/sudo/complex.rb:195 +#: src/include/sudo/complex.rb:195 msgid "Add new command with optional parameters" msgstr "선택적 파라미터와 함께 새 명령 추가" -#: src/include/sudo/complex.rb:202 src/include/sudo/dialog-cmnd.rb:52 -#: src/include/sudo/dialog-spec.rb:82 +#: src/include/sudo/complex.rb:202 src/include/sudo/dialog-cmnd.rb:52 +#: src/include/sudo/dialog-spec.rb:82 msgid "Command" msgstr "명령" -#: src/include/sudo/complex.rb:204 +#: src/include/sudo/complex.rb:204 msgid "Browse" msgstr "찾아보기" -#: src/include/sudo/complex.rb:206 +#: src/include/sudo/complex.rb:206 msgid "Parameters (optional)" msgstr "파라미터(선택 사항)" -#. yes-no popup - an error occured when saving the configuration -#: src/include/sudo/complex.rb:291 +#. yes-no popup - an error occured when saving the configuration +#: src/include/sudo/complex.rb:291 msgid "Saving sudoer's configuration failed. Change the settings?" msgstr "sudoer 구성을 저장하지 못했습니다. 설정을 변경하시겠습니까?" -#. encoding: utf-8 -#: src/include/sudo/dialog-cmnd.rb:40 +#. encoding: utf-8 +#: src/include/sudo/dialog-cmnd.rb:40 msgid "New Command Alias" msgstr "새 명령 별칭" -#: src/include/sudo/dialog-cmnd.rb:44 +#: src/include/sudo/dialog-cmnd.rb:44 msgid "Existing Command Alias" msgstr "기존 명령 별칭" -#: src/include/sudo/dialog-cmnd.rb:48 src/include/sudo/dialog-host.rb:52 -#: src/include/sudo/dialog-runas.rb:58 src/include/sudo/dialog-user.rb:59 +#: src/include/sudo/dialog-cmnd.rb:48 src/include/sudo/dialog-host.rb:52 +#: src/include/sudo/dialog-runas.rb:58 src/include/sudo/dialog-user.rb:59 msgid "Alias Name (in CAPITALS)" msgstr "별칭 이름(대문자)" -#: src/include/sudo/dialog-cmnd.rb:49 +#: src/include/sudo/dialog-cmnd.rb:49 msgid "Command Names or Directories in the Alias" msgstr "별칭의 명령 이름 또는 디렉토리" -#: src/include/sudo/dialog-cmnd.rb:52 src/include/sudo/dialog-spec.rb:82 +#: src/include/sudo/dialog-cmnd.rb:52 src/include/sudo/dialog-spec.rb:82 msgid "Parameters" msgstr "파라미터" -#. next -#. next -#. next -#. next -#: src/include/sudo/dialog-cmnd.rb:101 src/include/sudo/dialog-host.rb:102 -#: src/include/sudo/dialog-runas.rb:109 src/include/sudo/dialog-user.rb:108 +#. next +#. next +#. next +#. next +#: src/include/sudo/dialog-cmnd.rb:101 src/include/sudo/dialog-host.rb:102 +#: src/include/sudo/dialog-runas.rb:109 src/include/sudo/dialog-user.rb:108 msgid "Alias name must not be empty." msgstr "별칭 이름은 비워둘 수 없습니다." -#: src/include/sudo/dialog-cmnd.rb:109 src/include/sudo/dialog-host.rb:110 -#: src/include/sudo/dialog-runas.rb:117 src/include/sudo/dialog-user.rb:116 +#: src/include/sudo/dialog-cmnd.rb:109 src/include/sudo/dialog-host.rb:110 +#: src/include/sudo/dialog-runas.rb:117 src/include/sudo/dialog-user.rb:116 msgid "Alias with name %1 already exists" msgstr "%1(이)라는 이름의 별칭은 이미 있습니다." -#. Sudo::RemoveHostAlias(current_alias_name); -#: src/include/sudo/dialog-cmnd.rb:118 src/include/sudo/dialog-host.rb:121 -#: src/include/sudo/dialog-runas.rb:126 src/include/sudo/dialog-user.rb:125 +#. Sudo::RemoveHostAlias(current_alias_name); +#: src/include/sudo/dialog-cmnd.rb:118 src/include/sudo/dialog-host.rb:121 +#: src/include/sudo/dialog-runas.rb:126 src/include/sudo/dialog-user.rb:125 msgid "Alias must have at least one member." msgstr "별칭에는 하나 이상의 구성원이 있어야 합니다." -#. encoding: utf-8 -#: src/include/sudo/dialog-host.rb:44 +#. encoding: utf-8 +#: src/include/sudo/dialog-host.rb:44 msgid "New Host Alias" msgstr "새 호스트 별칭" -#: src/include/sudo/dialog-host.rb:48 +#: src/include/sudo/dialog-host.rb:48 msgid "Existing Host Alias" msgstr "기존 호스트 별칭" -#: src/include/sudo/dialog-host.rb:53 +#: src/include/sudo/dialog-host.rb:53 msgid "Hostnames or Networks in the Alias" msgstr "별칭의 호스트 이름 또는 네트워크" -#: src/include/sudo/dialog-host.rb:54 +#: src/include/sudo/dialog-host.rb:54 msgid "Hostnames/Networks" msgstr "호스트 이름/네트워크" -#. encoding: utf-8 -#: src/include/sudo/dialog-runas.rb:47 +#. encoding: utf-8 +#: src/include/sudo/dialog-runas.rb:47 msgid "New RunAs Alias" msgstr "새 RunAs 별칭" -#: src/include/sudo/dialog-runas.rb:54 +#: src/include/sudo/dialog-runas.rb:54 msgid "Existing RunAs Alias" msgstr "기존 RunAs 별칭" -#: src/include/sudo/dialog-runas.rb:64 src/include/sudo/dialog-user.rb:64 +#: src/include/sudo/dialog-runas.rb:64 src/include/sudo/dialog-user.rb:64 msgid "Alias Members" msgstr "별칭 구성원" -#. encoding: utf-8 -#: src/include/sudo/dialog-spec.rb:47 +#. encoding: utf-8 +#: src/include/sudo/dialog-spec.rb:47 msgid "New Sudo Rule" msgstr "새 Sudo 규칙" -#. Setting default values -#: src/include/sudo/dialog-spec.rb:50 +#. Setting default values +#: src/include/sudo/dialog-spec.rb:50 msgid "Existing Sudo Rule " msgstr "기존 Sudo 규칙" -#: src/include/sudo/dialog-spec.rb:60 +#: src/include/sudo/dialog-spec.rb:60 msgid "User, Group or User Alias" msgstr "사용자, 그룹 또는 사용자 별칭" -#: src/include/sudo/dialog-spec.rb:68 +#: src/include/sudo/dialog-spec.rb:68 msgid "Host or Host Alias" msgstr "호스트 또는 호스트 별칭" -#: src/include/sudo/dialog-spec.rb:76 +#: src/include/sudo/dialog-spec.rb:76 msgid "RunAs or RunAs Alias" msgstr "RunAs 또는 RunAs 별칭" -#: src/include/sudo/dialog-spec.rb:80 +#: src/include/sudo/dialog-spec.rb:80 msgid "No Password" msgstr "비밀번호 없음" -#: src/include/sudo/dialog-spec.rb:81 +#: src/include/sudo/dialog-spec.rb:81 msgid "Commands to Run" msgstr "실행할 명령" -#. next -#: src/include/sudo/dialog-spec.rb:152 +#. next +#: src/include/sudo/dialog-spec.rb:152 msgid "Username must not be empty." msgstr "사용자 이름은 비워 두면 안 됩니다." -#: src/include/sudo/dialog-spec.rb:157 +#: src/include/sudo/dialog-spec.rb:157 msgid "Hostname must not be empty." msgstr "호스트 이름은 비워 두면 안 됩니다." -#: src/include/sudo/dialog-spec.rb:166 +#: src/include/sudo/dialog-spec.rb:166 msgid "Command list must have at least one entry." msgstr "명령 목록에 항목이 하나 이상 있어야 합니다." -#. encoding: utf-8 -#: src/include/sudo/dialog-user.rb:47 +#. encoding: utf-8 +#: src/include/sudo/dialog-user.rb:47 msgid "New User Alias" msgstr "새 사용자 별칭" -#: src/include/sudo/dialog-user.rb:54 +#: src/include/sudo/dialog-user.rb:54 msgid "Existing User Alias" msgstr "기존 사용자 별칭" -#. encoding: utf-8 -#. ------------------------------------------------------------------------------ -#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. -#. -#. -#. This program is free software; you can redistribute it and/or modify it under -#. the terms of version 2 of the GNU General Public License as published by the -#. Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, but WITHOUT -#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS -#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License along with -#. this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, you may find -#. current contact information at www.novell.com. -#. ------------------------------------------------------------------------------ -#. File: include/sudo/dialogs.ycp -#. Package: Configuration of sudo -#. Summary: Dialogs definitions -#. Authors: Bubli -#. -#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ -#: src/include/sudo/dialogs.rb:44 +#. encoding: utf-8 +#. ------------------------------------------------------------------------------ +#. Copyright (c) 2006 Novell, Inc. All Rights Reserved. +#. +#. +#. This program is free software; you can redistribute it and/or modify it under +#. the terms of version 2 of the GNU General Public License as published by the +#. Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, but WITHOUT +#. ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS +#. FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License along with +#. this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, you may find +#. current contact information at www.novell.com. +#. ------------------------------------------------------------------------------ +#. File: include/sudo/dialogs.ycp +#. Package: Configuration of sudo +#. Summary: Dialogs definitions +#. Authors: Bubli +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/sudo/dialogs.rb:44 msgid "Sudo Configuration" msgstr "Sudo 구성" -#: src/include/sudo/dialogs.rb:109 +#: src/include/sudo/dialogs.rb:109 msgid "Users" msgstr "사용자" -#: src/include/sudo/dialogs.rb:110 src/include/sudo/dialogs.rb:224 +#: src/include/sudo/dialogs.rb:110 src/include/sudo/dialogs.rb:224 msgid "Hosts" msgstr "호스트" -#: src/include/sudo/dialogs.rb:111 +#: src/include/sudo/dialogs.rb:111 msgid "RunAs" msgstr "RunAs" -#: src/include/sudo/dialogs.rb:112 +#: src/include/sudo/dialogs.rb:112 msgid "NOPASSWD" msgstr "NOPASSWD" -#: src/include/sudo/dialogs.rb:113 src/include/sudo/dialogs.rb:259 +#: src/include/sudo/dialogs.rb:113 src/include/sudo/dialogs.rb:259 msgid "Commands" msgstr "명령" -#: src/include/sudo/dialogs.rb:118 +#: src/include/sudo/dialogs.rb:118 msgid "Up" msgstr "위" -#: src/include/sudo/dialogs.rb:119 +#: src/include/sudo/dialogs.rb:119 msgid "Down" msgstr "아래" -#: src/include/sudo/dialogs.rb:144 +#: src/include/sudo/dialogs.rb:144 msgid "Rules for sudo" msgstr "sudo 규칙" -#: src/include/sudo/dialogs.rb:146 +#: src/include/sudo/dialogs.rb:146 msgid "Rules for sudo " msgstr "sudo 규칙" -#: src/include/sudo/dialogs.rb:154 src/include/sudo/dialogs.rb:189 -#: src/include/sudo/dialogs.rb:224 src/include/sudo/dialogs.rb:259 +#: src/include/sudo/dialogs.rb:154 src/include/sudo/dialogs.rb:189 +#: src/include/sudo/dialogs.rb:224 src/include/sudo/dialogs.rb:259 msgid "Alias Name" msgstr "별칭 이름" -#: src/include/sudo/dialogs.rb:154 src/include/sudo/dialogs.rb:189 +#: src/include/sudo/dialogs.rb:154 src/include/sudo/dialogs.rb:189 msgid "Members" msgstr "구성원" -#: src/include/sudo/dialogs.rb:179 src/include/sudo/dialogs.rb:181 +#: src/include/sudo/dialogs.rb:179 src/include/sudo/dialogs.rb:181 msgid "User Aliases" msgstr "사용자 별칭" -#: src/include/sudo/dialogs.rb:214 src/include/sudo/dialogs.rb:216 +#: src/include/sudo/dialogs.rb:214 src/include/sudo/dialogs.rb:216 msgid "RunAs Aliases" msgstr "RunAs 별칭" -#: src/include/sudo/dialogs.rb:249 src/include/sudo/dialogs.rb:251 +#: src/include/sudo/dialogs.rb:249 src/include/sudo/dialogs.rb:251 msgid "Host Aliases" msgstr "호스트 별칭" -#: src/include/sudo/dialogs.rb:284 src/include/sudo/dialogs.rb:286 +#: src/include/sudo/dialogs.rb:284 src/include/sudo/dialogs.rb:286 msgid "Command Aliases" msgstr "명령 별칭" -#: src/include/sudo/dialogs.rb:442 +#: src/include/sudo/dialogs.rb:442 msgid "Yes" msgstr "예" -#: src/include/sudo/dialogs.rb:442 +#: src/include/sudo/dialogs.rb:442 msgid "No" msgstr "아니요" -#. current_alias_name = ""; -#: src/include/sudo/dialogs.rb:486 +#. current_alias_name = ""; +#: src/include/sudo/dialogs.rb:486 msgid "" "Host alias %1 is being used in one of the sudo rules.\n" -"Deleting it may result in an inconsistent sudo configuration file. Really " -"delete it?\n" +"Deleting it may result in an inconsistent sudo configuration file. Really delete it?\n" msgstr "" "호스트 별칭 %1은(는) sudo 규칙 중 하나에서 사용되고 있습니다.\n" "삭제하면 일관성 없는 sudo 구성 파일이 발생할 수 있습니다. 삭제하시겠습니까?\n" -#. No alias name set so far -#: src/include/sudo/dialogs.rb:549 +#. No alias name set so far +#: src/include/sudo/dialogs.rb:549 msgid "" "User alias %1 is being used in one of the sudo rules.\n" -"Deleting it may result in an inconsistent sudo configuration file. Really " -"delete it?\n" +"Deleting it may result in an inconsistent sudo configuration file. Really delete it?\n" msgstr "" "사용자 별칭 %1은(는) sudo 규칙 중 하나에서 사용되고 있습니다.\n" "삭제하면 일관성 없는 sudo 구성 파일이 발생할 수 있습니다. 삭제하시겠습니까?\n" -#. No alias name set so far -#: src/include/sudo/dialogs.rb:612 +#. No alias name set so far +#: src/include/sudo/dialogs.rb:612 msgid "" "RunAs alias %1 is being used in one of the sudo rules.\n" -"Deleting it may result in an inconsistent sudo configuration file. Really " -"delete it?\n" +"Deleting it may result in an inconsistent sudo configuration file. Really delete it?\n" msgstr "" "RunAs 별칭 %1은(는) sudo 규칙 중 하나에서 사용되고 있습니다.\n" "삭제하면 일관성 없는 sudo 구성 파일이 발생할 수 있습니다. 삭제하시겠습니까?\n" -#. No alias name set so far -#: src/include/sudo/dialogs.rb:674 +#. No alias name set so far +#: src/include/sudo/dialogs.rb:674 msgid "" "Command alias %1 is being used in one of the sudo rules.\n" -"Deleting it may result in an inconsistent sudo configuration file. Really " -"delete it?\n" +"Deleting it may result in an inconsistent sudo configuration file. Really delete it?\n" msgstr "" "명령 별칭 %1은(는) sudo 규칙 중 하나에서 사용되고 있습니다.\n" "삭제하면 일관성 없는 sudo 구성 파일이 발생할 수 있습니다. 삭제하시겠습니까?\n" -#. Read dialog help 1/2 -#: src/include/sudo/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/sudo/helps.rb:36 msgid "" "<p><b><big>Initializing sudo Configuration</big></b><br>\n" "</p>\n" @@ -367,8 +363,8 @@ "<p><b><big>sudo 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/sudo/helps.rb:40 +#. Read dialog help 2/2 +#: src/include/sudo/helps.rb:40 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -376,8 +372,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/sudo/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/sudo/helps.rb:44 msgid "" "<p><b><big>Saving sudo Configuration</big></b><br>\n" "</p>\n" @@ -385,8 +381,8 @@ "<p><b><big>sudo 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/sudo/helps.rb:48 +#. Write dialog help 2/2 +#: src/include/sudo/helps.rb:48 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -398,8 +394,8 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. User Specification help 1/6 -#: src/include/sudo/helps.rb:55 +#. User Specification help 1/6 +#: src/include/sudo/helps.rb:55 msgid "" "<p><b><big>Rules for sudo</big></b><br>\n" "\tRules for sudo basically determine which commands an user may run \n" @@ -419,8 +415,8 @@ "\t</p>\n" "\t" -#. User Specification help 2/6 -#: src/include/sudo/helps.rb:66 +#. User Specification help 2/6 +#: src/include/sudo/helps.rb:66 msgid "" "<p><b>Users</b> column denotes local or system user or user alias. \n" "\t<b>Hosts</b> column determines, on which hosts, or group \n" @@ -429,34 +425,29 @@ "\t" msgstr "" "<p><b>사용자</b> 열은 로컬 또는 시스템 사용자 /사용자 별칭을 지정합니다.\n" -"\t<b>호스트</b> 열은 사용자가 지정된 명령을 실행할 수 있고 호스트 별칭으로 참" -"조되는\n" +"\t<b>호스트</b> 열은 사용자가 지정된 명령을 실행할 수 있고 호스트 별칭으로 참조되는\n" "\t호스트 또는 호스트 그룹을 결정합니다.\n" "\t</p>\n" "\t" -#. User Specification help 3/6 -#: src/include/sudo/helps.rb:74 +#. User Specification help 3/6 +#: src/include/sudo/helps.rb:74 msgid "" "<b>RunAs</b> column is an\n" -"\toptional parameter, containing user name (or alias) whose access " -"privileges\n" -"\twill be used to run commands. <b>NOPASSWD</b> is a tag, determining " -"whether\n" +"\toptional parameter, containing user name (or alias) whose access privileges\n" +"\twill be used to run commands. <b>NOPASSWD</b> is a tag, determining whether\n" "\tusers need to authorize themselves before running commands.\n" "\t</p>\n" "\t" msgstr "" "<b>RunAs</b> 열은 명령 실행에\n" -"\t사용할 액세스 권한을 가진 사용자 이름(또는 별칭)을 포함하는 선택적 파라미터" -"입니다.\n" -"\t<b>NOPASSWD</b>는 명령을 실행하기 전에 사용자를 인증해야 하는지 여부를 결정" -"합니다.\n" +"\t사용할 액세스 권한을 가진 사용자 이름(또는 별칭)을 포함하는 선택적 파라미터입니다.\n" +"\t<b>NOPASSWD</b>는 명령을 실행하기 전에 사용자를 인증해야 하는지 여부를 결정합니다.\n" "\t</p>\n" "\t" -#. User Specification help 4/6 -#: src/include/sudo/helps.rb:83 +#. User Specification help 4/6 +#: src/include/sudo/helps.rb:83 msgid "" "<p>A set of commands that user can run on specified hosts is summarized \n" "\tin <b>Commands</b> column. \n" @@ -468,468 +459,382 @@ "\t</p>\n" "\t" -#. User Specification help 5/6 -#: src/include/sudo/helps.rb:90 +#. User Specification help 5/6 +#: src/include/sudo/helps.rb:90 msgid "" "<p> To add a new rule, click on <b>Add</b> button and fill in appropriate \n" "\tentries. User name, hostname and command list must not be empty.\n" "\t</p>\n" "\t" msgstr "" -"<p> 새로운 규칙을 추가하려면 <b>추가</b> 버튼을 클릭하고 필요한 항목을 입력하" -"십시오.\n" +"<p> 새로운 규칙을 추가하려면 <b>추가</b> 버튼을 클릭하고 필요한 항목을 입력하십시오.\n" "\t사용자 이름, 호스트 이름 및 명령 목록을 비워둘 수 없습니다.\n" "\t</p>\n" "\t" -#. User Specification help 5/6 -#: src/include/sudo/helps.rb:97 +#. User Specification help 5/6 +#: src/include/sudo/helps.rb:97 msgid "" "<p>To edit existing rule, select an entry from the table and click on \n" -"\t<b>Edit</b> button. To delete selected entry, click on <b>Delete</b> " -"button.\n" +"\t<b>Edit</b> button. To delete selected entry, click on <b>Delete</b> button.\n" "\t</p> \n" "\t" msgstr "" "<p>기존 규칙을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b>\n" -"\t버튼을 클릭하십시오. 선택한 항목을 삭제하려면 <b>삭제</b> 버튼을 클릭하십시" -"오.\n" +"\t버튼을 클릭하십시오. 선택한 항목을 삭제하려면 <b>삭제</b> 버튼을 클릭하십시오.\n" "\t</p> \n" "\t" -#. Single User Specification help 1/4 -#: src/include/sudo/helps.rb:104 +#. Single User Specification help 1/4 +#: src/include/sudo/helps.rb:104 msgid "" -"<p><b>User Name or Alias</b> may be specified by single username (e.g.foo), " -"group name prefixed\n" +"<p><b>User Name or Alias</b> may be specified by single username (e.g.foo), group name prefixed\n" "\twith '%' (e.g. %bar), or user alias name. If \n" -"\tkeyword 'ALL' is used, it stands for any user. Select from existing users, " -"groups and aliases \n" +"\tkeyword 'ALL' is used, it stands for any user. Select from existing users, groups and aliases \n" "\tin drop-down menu, or enter your own value. \n" "\t</p>\n" "\t" msgstr "" -"<p><b>사용자 이름 또는 별칭</b>은 단일 사용자 이름(예: foo), '%'가 앞에 추가" -"된\n" +"<p><b>사용자 이름 또는 별칭</b>은 단일 사용자 이름(예: foo), '%'가 앞에 추가된\n" "\t그룹 이름(예: %bar) 또는 사용자 별칭 이름으로 지정할 수 있습니다.\n" -"\t또, 키워드 'ALL' 은 모든 사용자를 의미합니다. 드롭다운 메뉴에서 기존 사용" -"자, 그룹 및 별칭을 \n" +"\t또, 키워드 'ALL' 은 모든 사용자를 의미합니다. 드롭다운 메뉴에서 기존 사용자, 그룹 및 별칭을 \n" "\t선택하거나 원하는 값을 입력하십시오.\n" "\t</p>\n" "\t" -#: src/include/sudo/helps.rb:112 +#: src/include/sudo/helps.rb:112 msgid "" -"<p><b>Hostname or Alias</b> entry consists of either hostname(e.g. www." -"example.com), single IP \n" -"\taddress (e.g. 192.168.0.1), IP address combined with netmask, or host " -"alias. If commands may be\n" -"\trun on any host, use keyword 'ALL'. Hostname or IP address is matched " -"against your own hostname\n" -"\tor IP address, so if you don't intend to share one /etc/sudoers file " -"between multiple machines, \n" +"<p><b>Hostname or Alias</b> entry consists of either hostname(e.g. www.example.com), single IP \n" +"\taddress (e.g. 192.168.0.1), IP address combined with netmask, or host alias. If commands may be\n" +"\trun on any host, use keyword 'ALL'. Hostname or IP address is matched against your own hostname\n" +"\tor IP address, so if you don't intend to share one /etc/sudoers file between multiple machines, \n" "\t'ALL' or 'localhost' entry will be sufficient for almost all purposes. \n" "\t</p>\n" "\t" msgstr "" -"<p><b>호스트 이름 또는 별칭</b> 항목은 호스트 이름(예: www.example.com) 외에" -"도 단일 IP 주소\n" -"\t(예: 192.168.0.1), IP 주소와 결합된 넷마스크 또는 호스트 별칭으로 구성됩니" -"다. 모든 호스트에서\n" -"\t명령을 실행하려면 'ALL' 키워드를 사용하십시오. 호스트 이름이나 IP 주소는 사" -"용자의\n" -"\t호스트 이름이나 IP 주소에 일치하므로, 여러 시스템에서 하나의 /etc/sudoers " -"파일을\n" -"\t공유하지 않을 경우 대부분 'ALL' 또는 'localhost' 항목을 사용하는 것이 좋습" -"니다.\n" +"<p><b>호스트 이름 또는 별칭</b> 항목은 호스트 이름(예: www.example.com) 외에도 단일 IP 주소\n" +"\t(예: 192.168.0.1), IP 주소와 결합된 넷마스크 또는 호스트 별칭으로 구성됩니다. 모든 호스트에서\n" +"\t명령을 실행하려면 'ALL' 키워드를 사용하십시오. 호스트 이름이나 IP 주소는 사용자의\n" +"\t호스트 이름이나 IP 주소에 일치하므로, 여러 시스템에서 하나의 /etc/sudoers 파일을\n" +"\t공유하지 않을 경우 대부분 'ALL' 또는 'localhost' 항목을 사용하는 것이 좋습니다.\n" "\t</p>\n" "\t" -#. Single User Specification help 2/4 -#: src/include/sudo/helps.rb:122 +#. Single User Specification help 2/4 +#: src/include/sudo/helps.rb:122 msgid "" -"<p><b>RunAs Username or Alias</b> is an optional parameter specifying an " -"user, \n" +"<p><b>RunAs Username or Alias</b> is an optional parameter specifying an user, \n" "\twhose access privileges \n" -"\twill be used to execute particular command. If empty, user <b>root</b> is " -"the default\n" -"\tone. It can be again single username, groupname prefixed with '%' or " -"run_as alias name\n" -"\tSelect from existing users, groups and aliases in drop-down menu, or enter " -"your own value.\n" +"\twill be used to execute particular command. If empty, user <b>root</b> is the default\n" +"\tone. It can be again single username, groupname prefixed with '%' or run_as alias name\n" +"\tSelect from existing users, groups and aliases in drop-down menu, or enter your own value.\n" "\t</p>\n" "\t" msgstr "" -"<p><b>RunAs 사용자 이름 또는 별칭</b>은 특정 명령을 실행하는데 사용할 액세스 " -"권한을\n" +"<p><b>RunAs 사용자 이름 또는 별칭</b>은 특정 명령을 실행하는데 사용할 액세스 권한을\n" "\t가진 사용자를 지정하는 선택적 파라미터입니다.\n" "\t비어 있을 경우 <b>루트</b> 사용자가 기본값입니다.\n" -"\t이 항목은 단일 사용자 이름, 앞에 '%'이(가) 추가된 그룹 이름 또는 run_as 별" -"칭 이름일\n" -"\t수 있습니다. 드롭다운 메뉴에서 기존 사용자, 그룹 및 별칭을 선택하거나 사용" -"자가 원하는 값을 입력하십시오.\n" +"\t이 항목은 단일 사용자 이름, 앞에 '%'이(가) 추가된 그룹 이름 또는 run_as 별칭 이름일\n" +"\t수 있습니다. 드롭다운 메뉴에서 기존 사용자, 그룹 및 별칭을 선택하거나 사용자가 원하는 값을 입력하십시오.\n" "\t</p>\n" "\t" -#. Single User Specification help 3/4 -#: src/include/sudo/helps.rb:132 +#. Single User Specification help 3/4 +#: src/include/sudo/helps.rb:132 msgid "" -"<p><b>No Password</b> is an optional tag. Normally, users have to " -"authenticate\n" -"\tthemselves (i.e. supply their own password, not root's one) before running " -"particular \n" +"<p><b>No Password</b> is an optional tag. Normally, users have to authenticate\n" +"\tthemselves (i.e. supply their own password, not root's one) before running particular \n" "\tcommand. Set No Password tag to 'Yes' if you want to\n" "\tdisable this authentication\n" "\t</p>\n" "\t" msgstr "" -"<p><b>비밀번호 없음</b>은 선택적 태그입니다. 일반적으로 사용자는 특정 명령을 " -"실행하기 전에\n" +"<p><b>비밀번호 없음</b>은 선택적 태그입니다. 일반적으로 사용자는 특정 명령을 실행하기 전에\n" "자신을 인증해야 합니다(즉, 루트의 비밀번호가 아니라 \n" "\t자신의 비밀번호 제공). 이 인증을 비활성화하려면\n" "\t[비밀번호 없음] 태그를 '예'로 설정하십시오.\n" "\t</p>\n" "\t" -#. Single User Specification help 4/4 -#: src/include/sudo/helps.rb:141 +#. Single User Specification help 4/4 +#: src/include/sudo/helps.rb:141 msgid "" "<p><b>Commands to Run</b> table is a list of commands (optionally with\n" -"\tparameters), directories and command aliases that particular user will be " -"allowed \n" -"\tto run. If a directory name is used, any command in that directory can be " -"run. \n" +"\tparameters), directories and command aliases that particular user will be allowed \n" +"\tto run. If a directory name is used, any command in that directory can be run. \n" "\tAgain, keyword 'ALL' stands for any command, so use it with care.\n" "\t</p>\n" "\t" msgstr "" "<p><b>실행할 명령</b> 테이블은 특정 사용자를 허용하는 디렉토리 및 명령\n" -"\t별칭의 명령 목록(선택적 파라미터 포함)입니다. 디렉토리 이름이 사용된 경우 " -"해당\n" +"\t별칭의 명령 목록(선택적 파라미터 포함)입니다. 디렉토리 이름이 사용된 경우 해당\n" "\t디렉토리에 있는 명령을 실행할 수 있습니다. 'ALL' 키워드는 모든 명령을\n" "\t의미하므로, 사용 시 주의하십시오.\n" "\t</p>\n" "\t" -#: src/include/sudo/helps.rb:149 +#: src/include/sudo/helps.rb:149 msgid "" -"To add a new command, click on <b>Add</b> button, fill in command name with " -"optional\n" -"\tparameters and click <b>OK</b>. To remove command, select appropriate " -"entry from the table\n" +"To add a new command, click on <b>Add</b> button, fill in command name with optional\n" +"\tparameters and click <b>OK</b>. To remove command, select appropriate entry from the table\n" "\tand click on <b>Delete</b> button.\n" "\t" msgstr "" -"새 명령을 추가하려면 <b>추가</b> 버튼을 클릭하고 선택적 파라미터를 사용하여 " -"명령 이름을 입력한 다음\n" +"새 명령을 추가하려면 <b>추가</b> 버튼을 클릭하고 선택적 파라미터를 사용하여 명령 이름을 입력한 다음\n" "\t<b>확인</b>을 클릭하십시오. 명령을 제거하려면 테이블에서 적절한\n" "\t항목을 선택하고 <b>삭제</b> 버튼을 클릭하십시오.\n" "\t" -#. User Aliases help 1/3 -#: src/include/sudo/helps.rb:156 +#. User Aliases help 1/3 +#: src/include/sudo/helps.rb:156 msgid "" "<p><b><big>User Aliases</big></b><br>\n" -"\tIn this dialog, you can configure user aliases. User alias is a set of " -"users that is given\n" -"\tan unique name. This name is later used to refer to all users in this set " -"in sudo configuration. \n" +"\tIn this dialog, you can configure user aliases. User alias is a set of users that is given\n" +"\tan unique name. This name is later used to refer to all users in this set in sudo configuration. \n" "\t</p> \n" "\t" msgstr "" "<p><b><big>사용자 별칭</big></b><br>\n" -"\t이 대화 상자에서 사용자 별칭을 구성할 수 있습니다. 사용자 별칭은 고유한 이" -"름이 지정되는\n" -"\t사용자 집합입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 사용" -"자를 나타내는 데 사용됩니다. \n" +"\t이 대화 상자에서 사용자 별칭을 구성할 수 있습니다. 사용자 별칭은 고유한 이름이 지정되는\n" +"\t사용자 집합입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 사용자를 나타내는 데 사용됩니다. \n" "\t</p> \n" "\t" -#. User Aliases help 2/3 -#: src/include/sudo/helps.rb:164 +#. User Aliases help 2/3 +#: src/include/sudo/helps.rb:164 msgid "" -"<p>To add a new user alias, click on <b>Add</b> button and fill in " -"appropriate entries. \n" +"<p>To add a new user alias, click on <b>Add</b> button and fill in appropriate entries. \n" "\tAlias name and list of users in the alias must not be empty. \n" "\t</p>\n" "\t" msgstr "" -"<p>새 사용자 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 적절한 항목을 입력" -"하십시오. \n" +"<p>새 사용자 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 적절한 항목을 입력하십시오. \n" "\t별칭 이름과 사용자 목록은 비워둘 수 없습니다. \n" "\t</p>\n" "\t" -#. User Aliases help 3/3 -#: src/include/sudo/helps.rb:171 +#. User Aliases help 3/3 +#: src/include/sudo/helps.rb:171 msgid "" -"<p>To edit existing user alias, select an entry from the table and click on " -"<b>Edit</b>\n" +"<p>To edit existing user alias, select an entry from the table and click on <b>Edit</b>\n" "\tbutton. To delete selected entry, click on <b>Delete</b> button. \n" "\t</p>\n" "\t" msgstr "" -"<p>기존 사용자 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼" -"을 클릭하십시오.\n" +"<p>기존 사용자 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼을 클릭하십시오.\n" "\t선택한 항목을 삭제하려면 <b>삭제</b> 버튼을 클릭하십시오.\n" "\t</p>\n" "\t" -#. Host Aliases help 1/3 -#: src/include/sudo/helps.rb:178 +#. Host Aliases help 1/3 +#: src/include/sudo/helps.rb:178 msgid "" "<p><b><big>Host Aliases</big></b><br>\n" -"\tIn this dialog, you can configure host aliases. Host alias is a set of " -"hosts that is given\n" -"\tan unique name. This name is later used to refer to all hosts in this set " -"in sudo configuration. \n" +"\tIn this dialog, you can configure host aliases. Host alias is a set of hosts that is given\n" +"\tan unique name. This name is later used to refer to all hosts in this set in sudo configuration. \n" "\t</p>\n" "\t" msgstr "" "<p><b><big>호스트 별칭</big></b><br>\n" -"\t이 대화 상자에서 호스트 별칭을 구성할 수 있습니다. 호스트 별칭은 고유한 이" -"름이 지정된\n" -"\t호스트 집합입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 호스" -"트를 나타내는 데 사용됩니다. \n" +"\t이 대화 상자에서 호스트 별칭을 구성할 수 있습니다. 호스트 별칭은 고유한 이름이 지정된\n" +"\t호스트 집합입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 호스트를 나타내는 데 사용됩니다. \n" "\t</p>\n" "\t" -#. Host Aliases help 2/3 -#: src/include/sudo/helps.rb:186 +#. Host Aliases help 2/3 +#: src/include/sudo/helps.rb:186 msgid "" -"<p>To add a new host alias, click on <b>Add</b> button and fill in " -"appropriate entries. \n" +"<p>To add a new host alias, click on <b>Add</b> button and fill in appropriate entries. \n" "\tAlias name and list of hosts in the alias must not be empty. \n" "\t</p>\n" "\t" msgstr "" -"<p>새 호스트 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 해당 항목을 입력하" -"십시오.\n" +"<p>새 호스트 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 해당 항목을 입력하십시오.\n" "\t별칭 이름과 호스트 목록은 비워둘 수 없습니다.\n" "\t</p>\n" "\t" -#. Host Aliases help 3/3 -#: src/include/sudo/helps.rb:193 +#. Host Aliases help 3/3 +#: src/include/sudo/helps.rb:193 msgid "" -"<p>To edit existing host alias, select an entry from the table and click on " -"<b>Edit</b>\n" +"<p>To edit existing host alias, select an entry from the table and click on <b>Edit</b>\n" "\tbutton. To delete selected entry, click on <b>Delete</b> button. \n" "\t</p>\n" "\t" msgstr "" -"<p>기존 호스트 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼" -"을\n" +"<p>기존 호스트 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼을\n" "\t클릭하십시오. 선택한 항목을 삭제하려면 <b>삭제</b> 버튼을 클릭하십시오.\n" "\t</p>\n" "\t" -#. RunAs Aliases help 1/3 -#: src/include/sudo/helps.rb:200 +#. RunAs Aliases help 1/3 +#: src/include/sudo/helps.rb:200 msgid "" "<p><b><big>RunAs Aliases</big></b><br>\n" -"\tIn this dialog, you can configure RunAs aliases. RunAs alias is a set of " -"users that is given\n" -"\tan unique name. This name is later used to refer to all users in this set " -"in sudo configuration. \n" +"\tIn this dialog, you can configure RunAs aliases. RunAs alias is a set of users that is given\n" +"\tan unique name. This name is later used to refer to all users in this set in sudo configuration. \n" "\t</p> \n" "\t" msgstr "" "<p><b><big>RunAs 별칭</big></b><br>\n" -"\t이 대화 상자에서 RunAs 별칭을 구성할 수 있습니다. RunAs 별칭은 고유한 이름" -"이 지정된\n" -"\t사용자 집합입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 사용" -"자를 나타내는 데 사용됩니다.\n" +"\t이 대화 상자에서 RunAs 별칭을 구성할 수 있습니다. RunAs 별칭은 고유한 이름이 지정된\n" +"\t사용자 집합입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 사용자를 나타내는 데 사용됩니다.\n" "\t</p>\n" "\t" -#. RunAs Aliases help 2/3 -#: src/include/sudo/helps.rb:208 +#. RunAs Aliases help 2/3 +#: src/include/sudo/helps.rb:208 msgid "" -"<p>To add a new RunAs alias, click on <b>Add</b> button and fill in " -"appropriate entries. \n" +"<p>To add a new RunAs alias, click on <b>Add</b> button and fill in appropriate entries. \n" "\tAlias name and list of users in the alias must not be empty. \n" "\t</p>\n" "\t" msgstr "" -"<p>새 RunAs 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 해당 항목을 입력하" -"십시오.\n" +"<p>새 RunAs 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 해당 항목을 입력하십시오.\n" "\t별칭 이름과 사용자 목록은 비워둘 수 없습니다.\n" "\t</p>\n" "\t" -#. RunAs Aliases help 3/3 -#: src/include/sudo/helps.rb:215 +#. RunAs Aliases help 3/3 +#: src/include/sudo/helps.rb:215 msgid "" -"<p>To edit existing RunAs alias, select an entry from the table and click on " -"<b>Edit</b>\n" +"<p>To edit existing RunAs alias, select an entry from the table and click on <b>Edit</b>\n" "\tbutton. To delete selected entry, click on <b>Delete</b> button. \n" "\t</p>\n" "\t" msgstr "" -"<p>기존 RunAs 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼" -"을 클릭하십시오.\n" +"<p>기존 RunAs 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼을 클릭하십시오.\n" "\t선택한 항목을 삭제하려면 <b>삭제</b> 버튼을 클릭하십시오.\n" "\t</p>\n" "\t" -#. Command Aliases help 1/3 -#: src/include/sudo/helps.rb:222 +#. Command Aliases help 1/3 +#: src/include/sudo/helps.rb:222 msgid "" "<p><b><big>Command Aliases</big></b><br>\n" -"\tIn this dialog, you can configure command aliases. Command alias is a set " -"of commands \n" -"\t(optionally with parameters) that is given an unique name. This name is " -"then used to refer\n" +"\tIn this dialog, you can configure command aliases. Command alias is a set of commands \n" +"\t(optionally with parameters) that is given an unique name. This name is then used to refer\n" "\tto all commands in this set in sudo configuration. \n" "\t</p>\n" "\t" msgstr "" "<p><b><big>명령 별칭</big></b><br>\n" -"\t이 대화 상자에서 명령 별칭을 구성할 수 있습니다. 명령 별칭은 고유한 이름이 " -"지정된 명령 집합\n" -"\t(선택적 파라미터 포함)입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있" -"는 모든 명령을\n" +"\t이 대화 상자에서 명령 별칭을 구성할 수 있습니다. 명령 별칭은 고유한 이름이 지정된 명령 집합\n" +"\t(선택적 파라미터 포함)입니다. 이 이름은 나중에 sudo 구성의 해당 집합에 있는 모든 명령을\n" "\t나타내는 데 사용됩니다. \n" "\t</p>\n" "\t" -#. Command Aliases help 2/3 -#: src/include/sudo/helps.rb:231 +#. Command Aliases help 2/3 +#: src/include/sudo/helps.rb:231 msgid "" -"<p>To add a new command alias, click on <b>Add</b> button and fill in " -"appropriate entries. \n" +"<p>To add a new command alias, click on <b>Add</b> button and fill in appropriate entries. \n" "\tAlias name and list of commands in the alias must not be empty. \n" "\t</p>\n" "\t" msgstr "" -"<p>새 명령 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 해당 항목을 입력하십" -"시오.\n" +"<p>새 명령 별칭을 추가하려면 <b>추가</b> 버튼을 클릭하고 해당 항목을 입력하십시오.\n" "\t별칭 이름과 명령 목록은 비워둘 수 없습니다.\n" "\t</p>\n" "\t" -#. Command Aliases help 3/3 -#: src/include/sudo/helps.rb:238 +#. Command Aliases help 3/3 +#: src/include/sudo/helps.rb:238 msgid "" -"<p>To edit existing command alias, select an entry from the table and click " -"on <b>Edit</b>\n" +"<p>To edit existing command alias, select an entry from the table and click on <b>Edit</b>\n" "\tbutton. To delete selected entry, click on <b>Delete</b> button. \n" "\t</p>\n" "\t" msgstr "" -"<p>기존 명령 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼" -"을\n" +"<p>기존 명령 별칭을 편집하려면 테이블에서 항목을 선택하고 <b>편집</b> 버튼을\n" "\t클릭하십시오. 선택한 항목을 삭제하려면 <b>삭제</b> 버튼을 클릭하십시오.\n" "\t</p>\n" "\t" -#. Single User Alias Help 1/2 -#: src/include/sudo/helps.rb:245 +#. Single User Alias Help 1/2 +#: src/include/sudo/helps.rb:245 msgid "" "<p><b><big>User Alias</big></b><br>\n" -"\tUser alias consists of one or more users, system groups (prefixed with " -"'%') or other\n" -"\tuser aliases. It is given single name (must contain uppercase letters, " -"numbers and underscore\tonly), which is then used to refer to all users in " -"this alias.\n" +"\tUser alias consists of one or more users, system groups (prefixed with '%') or other\n" +"\tuser aliases. It is given single name (must contain uppercase letters, numbers and underscore\tonly), which is then used to refer to all users in this alias.\n" "\t</p>\n" "\t" msgstr "" "<p><b><big>사용자 별칭</big></b><br>\n" -"\t사용자 별칭은 여러 사용자나 시스템 그룹(앞에 '%' 있음) 또는 다른 사용자 별" -"칭으로\n" -"\t구성되어 있습니다. 사용자 별칭에는 단일 이름(대문자, 숫자 및 밑줄만 사용해" -"야 함)을\t지정하여 사용자 전체를 나타내는 데 사용합니다.\n" +"\t사용자 별칭은 여러 사용자나 시스템 그룹(앞에 '%' 있음) 또는 다른 사용자 별칭으로\n" +"\t구성되어 있습니다. 사용자 별칭에는 단일 이름(대문자, 숫자 및 밑줄만 사용해야 함)을\t지정하여 사용자 전체를 나타내는 데 사용합니다.\n" "\t</p>\n" "\t" -#. Single User Alias Help 2/3 -#. Single User Alias Help 2/3 -#: src/include/sudo/helps.rb:253 src/include/sudo/helps.rb:306 +#. Single User Alias Help 2/3 +#. Single User Alias Help 2/3 +#: src/include/sudo/helps.rb:253 src/include/sudo/helps.rb:306 msgid "" -"<p>Enter unique name into <b>Alias Name</b> text entry. To add users or " -"groups to the\n" -"\talias, select user or group name from the drop-down menu and click on " -"<b>Add</b> button.\n" -"\tTo remove user from the alias, select appropriate entry from the table, " -"and click on\n" +"<p>Enter unique name into <b>Alias Name</b> text entry. To add users or groups to the\n" +"\talias, select user or group name from the drop-down menu and click on <b>Add</b> button.\n" +"\tTo remove user from the alias, select appropriate entry from the table, and click on\n" "\t<b>Remove</b> button. To finish the configuration, click <b>OK</b>.\n" "\t</p>\n" "\t" msgstr "" -"<p><b>별칭 이름</b> 텍스트 항목에 고유한 이름을 입력하십시오. 사용자나 그룹" -"을 별칭에\n" -"\t추가하려면 드롭다운 메뉴에서 사용자나 그룹 이름을 선택하고 <b>추가</b> 버튼" -"을 클릭하십시오.\n" +"<p><b>별칭 이름</b> 텍스트 항목에 고유한 이름을 입력하십시오. 사용자나 그룹을 별칭에\n" +"\t추가하려면 드롭다운 메뉴에서 사용자나 그룹 이름을 선택하고 <b>추가</b> 버튼을 클릭하십시오.\n" "\t별칭에서 사용자를 제거하려면 테이블에서 해당 항목을 선택하고\n" -"\t<b>제거</b> 버튼을 클릭하십시오. 구성을 마치려면<b>확인</b>을 클릭하십시" -"오.\n" +"\t<b>제거</b> 버튼을 클릭하십시오. 구성을 마치려면<b>확인</b>을 클릭하십시오.\n" "\t</p>\n" "\t" -#. Single User Alias Help 3/3 -#. Single Host Alias Help 4/4 -#. Single User Alias Help 2/3 -#. Single Command Alias Help 4/4 -#: src/include/sudo/helps.rb:262 src/include/sudo/helps.rb:292 -#: src/include/sudo/helps.rb:315 src/include/sudo/helps.rb:346 +#. Single User Alias Help 3/3 +#. Single Host Alias Help 4/4 +#. Single User Alias Help 2/3 +#. Single Command Alias Help 4/4 +#: src/include/sudo/helps.rb:262 src/include/sudo/helps.rb:292 +#: src/include/sudo/helps.rb:315 src/include/sudo/helps.rb:346 msgid "" -"<b>Note:</b> Alias name must not be empty. Each alias must have at least one " -"member.\n" +"<b>Note:</b> Alias name must not be empty. Each alias must have at least one member.\n" "\t" msgstr "" -"<b>참고:</b> 별칭 이름은 비워둘 수 없습니다. 각 별칭에는 하나 이상의 구성원" -"이 있어야 합니다..\n" +"<b>참고:</b> 별칭 이름은 비워둘 수 없습니다. 각 별칭에는 하나 이상의 구성원이 있어야 합니다..\n" "\t" -#. Single Host Alias Help 1/4 -#: src/include/sudo/helps.rb:266 +#. Single Host Alias Help 1/4 +#: src/include/sudo/helps.rb:266 msgid "" "<p><b><big>Host Alias</big></b><br>\n" -"\tHost alias consists of one or more hostnames, single IP addresses, IP " -"addresses\n" -"\tcombined with netmask id dotted quad notation (e.g. " -"192.168.0.0/255.255.255.0) or\n" -"\tCIDR number of bits notation (e.g. 192.168.0.0/24), or other host aliases. " -"It is \n" -"\tgiven single name (must contain uppercase letters, numbers and underscore " -"only), which \n" +"\tHost alias consists of one or more hostnames, single IP addresses, IP addresses\n" +"\tcombined with netmask id dotted quad notation (e.g. 192.168.0.0/255.255.255.0) or\n" +"\tCIDR number of bits notation (e.g. 192.168.0.0/24), or other host aliases. It is \n" +"\tgiven single name (must contain uppercase letters, numbers and underscore only), which \n" "\tis then used to refer to all hosts in this alias.\n" "\t</p>\n" "\t" msgstr "" "<p><b><big>호스트 별칭</big></b><br>\n" -"\t호스트 별칭은 여러 호스트 이름, 단일 IP 주소, 넷마스크 ID(점으로 구분된 4자" -"리 표기)(예: 192.168.0.0/255.255.255.0)를 포함한 IP 주소 또는 \n" -"\tCIDR 번호(비트 단위 표기)(예: 192.168.0.0/24) 또는 다른 호스트 별칭으로 구" -"성됩니다. 호스트 별칭에는 단일 이름(대문자, 숫자, 밑줄만\n" +"\t호스트 별칭은 여러 호스트 이름, 단일 IP 주소, 넷마스크 ID(점으로 구분된 4자리 표기)(예: 192.168.0.0/255.255.255.0)를 포함한 IP 주소 또는 \n" +"\tCIDR 번호(비트 단위 표기)(예: 192.168.0.0/24) 또는 다른 호스트 별칭으로 구성됩니다. 호스트 별칭에는 단일 이름(대문자, 숫자, 밑줄만\n" "\t사용해야 함)을 지정하여 해당 별칭의 모든 호스트를 나타내는 데 사용합니다.\n" "\t</p>\n" "\t" -#. Single Host Alias Help 2/4 -#: src/include/sudo/helps.rb:277 +#. Single Host Alias Help 2/4 +#: src/include/sudo/helps.rb:277 msgid "" "<p>Enter unique name into <b>Alias Name</b> text entry. To add hosts to the\n" -"\talias, click on <b>Add</b> button. A pop-up window will appear, where you " -"can enter\n" +"\talias, click on <b>Add</b> button. A pop-up window will appear, where you can enter\n" "\tvalid hostname or IP address and then click <b>OK</b>.\n" "\t<p>\n" "\t" msgstr "" "<p><b>별칭 이름</b> 텍스트 항목에 고유한 이름을 입력하십시오. 별칭에\n" -"\t호스트를 추가하려면 <b>추가</b> 버튼을 클릭하십시오. 팝업이 표시되면 올바" -"른 호스트\n" +"\t호스트를 추가하려면 <b>추가</b> 버튼을 클릭하십시오. 팝업이 표시되면 올바른 호스트\n" "\t이름 또는 IP 주소를 입력하고 <b>확인</b>을 클릭하십시오.\n" "\t<p>\n" "\t" -#. Single Host Alias Help 3/4 -#: src/include/sudo/helps.rb:285 +#. Single Host Alias Help 3/4 +#: src/include/sudo/helps.rb:285 msgid "" -"To remove host from the alias, select appropriate entry from the table, and " -"click on\n" +"To remove host from the alias, select appropriate entry from the table, and click on\n" "\t<b>Remove</b> button. To finish the configuration, click <b>OK</b>.\n" "\t</p>\n" "\t" @@ -939,85 +844,67 @@ "\t</p>\n" "\t" -#. Single RunAs Alias Help 1/2 -#: src/include/sudo/helps.rb:296 +#. Single RunAs Alias Help 1/2 +#: src/include/sudo/helps.rb:296 msgid "" "<p><b><big>RunAs Alias</big></b><br>\n" -"\tRunAs alias is very similar to User Alias. It consists of one or more " -"users, system groups \n" -"\t(prefixed with '%') or other RunAs aliases. It is given single name (must " -"contain \n" -"\tuppercase letters, numbers and underscore only), which is then used to " -"refer to all users \n" +"\tRunAs alias is very similar to User Alias. It consists of one or more users, system groups \n" +"\t(prefixed with '%') or other RunAs aliases. It is given single name (must contain \n" +"\tuppercase letters, numbers and underscore only), which is then used to refer to all users \n" "\tin this alias.\n" "\t</p>\n" "\t" msgstr "" "<p><b><big>RunAs 별칭</big></b><br>\n" -"\tRunAs 별칭은 사용자 별칭과 유사하며, 여러 사용자, 시스템 그룹(앞에 '%' 있" -"음) 또는\n" +"\tRunAs 별칭은 사용자 별칭과 유사하며, 여러 사용자, 시스템 그룹(앞에 '%' 있음) 또는\n" "\t다른 RunAs 별칭으로 구성됩니다. RunAs 별칭에는\n" -"\t단일 이름(대문자, 숫자, 밑줄만 사용해야 함)을 지정하여 해당 별칭의 모든 사" -"용자를 나타내는 데\n" +"\t단일 이름(대문자, 숫자, 밑줄만 사용해야 함)을 지정하여 해당 별칭의 모든 사용자를 나타내는 데\n" "\t사용합니다.\n" "\t</p>\n" "\t" -#. Single Command Alias Help 1/4 -#: src/include/sudo/helps.rb:319 +#. Single Command Alias Help 1/4 +#: src/include/sudo/helps.rb:319 msgid "" "<p><b><big>Command Alias</big></b><br>\n" -"\tCommand Alias is a list of one or more commands (with optional " -"parameters), directories, or\n" -"\tother command aliases. It is given single name (must contain uppercase " -"letters, numbers and\n" +"\tCommand Alias is a list of one or more commands (with optional parameters), directories, or\n" +"\tother command aliases. It is given single name (must contain uppercase letters, numbers and\n" "\tunderscore only), which is \n" -"\tthen used to refer to all commands in this alias. A command can optionally " -"have one or more\n" -"\tparameters specified. If so, users can run the command with these " -"parameters only. If a \n" +"\tthen used to refer to all commands in this alias. A command can optionally have one or more\n" +"\tparameters specified. If so, users can run the command with these parameters only. If a \n" "\tdirectory name is used, any command in that directory can be run. \n" "\t</p>\n" "\t" msgstr "" "<p><b><big>명령 별칭</big></b><br>\n" -"\t명령 별칭은 여러 명령(선택적 파라미터 포함)이나 디렉토리 또는 다른 명령 별" -"칭으로 구성됩니다.\n" -"\t명령 별칭에는 단일 이름(대문자, 숫자, 밑줄만 사용해야 함)을 지정하여 해당 " -"별칭의 모든 명령을 나타내는 데\n" +"\t명령 별칭은 여러 명령(선택적 파라미터 포함)이나 디렉토리 또는 다른 명령 별칭으로 구성됩니다.\n" +"\t명령 별칭에는 단일 이름(대문자, 숫자, 밑줄만 사용해야 함)을 지정하여 해당 별칭의 모든 명령을 나타내는 데\n" "\t사용합니다.\n" -"\t명령에는 선택적으로 여러 파라미터를 지정할 수 있습니다. 이런 경우 사용자는 " -"해당 파라미터를\n" +"\t명령에는 선택적으로 여러 파라미터를 지정할 수 있습니다. 이런 경우 사용자는 해당 파라미터를\n" "\t사용한 명령만 실행할 수 있습니다. 또한 디렉토리 이름이 사용된 경우 해당\n" "\t디렉토리에 있는 모든 명령을 실행할 수 있습니다.\n" "\t</p>\n" "\t" -#. Single Command Alias Help 2/4 -#: src/include/sudo/helps.rb:331 +#. Single Command Alias Help 2/4 +#: src/include/sudo/helps.rb:331 msgid "" -"<p>Enter unique name into <b>Alias Name</b> text entry. To add a new command " -"to the alias,\n" -"\tclick on <b>Add</b> button.A pop-up window will appear, where you can " -"enter command name\n" -"\t(or select one from file browser by clicking on <b>Browse</b> button. " -"Additionally, you can\n" +"<p>Enter unique name into <b>Alias Name</b> text entry. To add a new command to the alias,\n" +"\tclick on <b>Add</b> button.A pop-up window will appear, where you can enter command name\n" +"\t(or select one from file browser by clicking on <b>Browse</b> button. Additionally, you can\n" "\tspecify command parameters in <b>Parameters</b> text entry\n" "\t" msgstr "" -"<p><b>별칭 이름</b> 테스트 항목에 고유한 이름을 입력하십시오. 별칭에 새 명령" -"을 추가하려면\n" +"<p><b>별칭 이름</b> 테스트 항목에 고유한 이름을 입력하십시오. 별칭에 새 명령을 추가하려면\n" "\t<b>추가</b> 버튼을 클릭하십시오. 팝업 창이 나타나며,\n" -"\t여기서 명령 이름을 입력할 수 있거나 <b>찾아보기</b> 버튼을 클릭하여 파일 브" -"라우저에서 선택할 수 있습니다. 또한\n" +"\t여기서 명령 이름을 입력할 수 있거나 <b>찾아보기</b> 버튼을 클릭하여 파일 브라우저에서 선택할 수 있습니다. 또한\n" "\t<b>파라미터</b> 텍스트 항목에 명령 파라미터를 지정할 수 있습니다.\n" "\t" -#. Single Command Alias Help 3/4 -#: src/include/sudo/helps.rb:339 +#. Single Command Alias Help 3/4 +#: src/include/sudo/helps.rb:339 msgid "" -"To remove command from the alias, select appropriate entry from the table, " -"and click on\n" +"To remove command from the alias, select appropriate entry from the table, and click on\n" "\t<b>Remove</b> button. To finish the configuration, click <b>OK</b>.\n" "\t</p>\n" "\t" @@ -1027,18 +914,17 @@ "\t</p>\n" "\t" -#. if(issubstring(line[3]:"","NOPASSWD:")) { -#. m["no_passwd"] = (boolean) true; -#. } -#. else { -#. m["no_passwd"] = (boolean) false; -#. } -#: src/modules/Sudo.rb:400 -msgid "" -"This rule is a system rule necessary for correct functionality of sudo.\n" +#. if(issubstring(line[3]:"","NOPASSWD:")) { +#. m["no_passwd"] = (boolean) true; +#. } +#. else { +#. m["no_passwd"] = (boolean) false; +#. } +#: src/modules/Sudo.rb:400 +msgid "This rule is a system rule necessary for correct functionality of sudo.\n" msgstr "이 규칙은 sudo 기능의 정상적인 작동에 필요한 시스템 규칙입니다.\n" -#: src/modules/Sudo.rb:407 +#: src/modules/Sudo.rb:407 msgid "" "After deleting it, some applications may no longer work.\n" "Really delete?" @@ -1046,7 +932,7 @@ "이 규칙을 삭제하면 일부 응용 프로그램이 더 이상 작동하지 않을 수 있습니다.\n" "삭제하시겠습니까?" -#: src/modules/Sudo.rb:414 +#: src/modules/Sudo.rb:414 msgid "" "If you change it, some applications may no longer work.\n" "Really edit? " @@ -1054,34 +940,32 @@ "이 규칙을 변경하면 일부 응용 프로그램이 더 이상 작동하지 않을 수 있습니다.\n" "편집하시겠습니까?" -#. end Commands -#: src/modules/Sudo.rb:545 -msgid "" -"All changes will be lost. Really quit sudo configuration without saving?" -msgstr "" -"모든 변경사항이 손실됩니다. 저장하지 않고 sudo 구성을 종료하시겠습니까?" +#. end Commands +#: src/modules/Sudo.rb:545 +msgid "All changes will be lost. Really quit sudo configuration without saving?" +msgstr "모든 변경사항이 손실됩니다. 저장하지 않고 sudo 구성을 종료하시겠습니까?" -#. Error message -#: src/modules/Sudo.rb:573 +#. Error message +#: src/modules/Sudo.rb:573 msgid "An error occurred while reading users and groups." msgstr "사용자 및 그룹을 읽는 동안 오류가 발생했습니다." -#. Sudo read dialog caption -#: src/modules/Sudo.rb:605 +#. Sudo read dialog caption +#: src/modules/Sudo.rb:605 msgid "Saving sudo Configuration" msgstr "sudo 구성 저장 중" -#. Progress stage 1/1 -#: src/modules/Sudo.rb:620 +#. Progress stage 1/1 +#: src/modules/Sudo.rb:620 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress step 1/1 -#: src/modules/Sudo.rb:624 +#. Progress step 1/1 +#: src/modules/Sudo.rb:624 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Error message -#: src/modules/Sudo.rb:638 +#. Error message +#: src/modules/Sudo.rb:638 msgid "Cannot write settings." msgstr "설정을 쓸 수 없습니다." Modified: branches/SLE12-SP3/yast/ko/po/support.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/support.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/support.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,68 +14,68 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xsupport module -#: src/clients/support.rb:56 +#. Command line help text for the Xsupport module +#: src/clients/support.rb:56 msgid "Configuration of support" msgstr "지원 구성" -#. Rich text title for Support in proposals -#: src/clients/support_proposal.rb:83 +#. Rich text title for Support in proposals +#: src/clients/support_proposal.rb:83 msgid "Support" msgstr "지원" -#. Menu title for Support in proposals -#: src/clients/support_proposal.rb:87 +#. Menu title for Support in proposals +#: src/clients/support_proposal.rb:87 msgid "&Support" msgstr "지원(&S)" -#. Command line parameters dialog caption -#: src/include/support/dialogs.rb:50 +#. Command line parameters dialog caption +#: src/include/support/dialogs.rb:50 msgid "Supportconfig Overview Dialog" msgstr "Supportconfig 개요 대화 상자" -#. Support configure1 dialog contents -#: src/include/support/dialogs.rb:57 +#. Support configure1 dialog contents +#: src/include/support/dialogs.rb:57 msgid "Open SUSE Support Center" msgstr "SUSE 지원 센터 열기" -#: src/include/support/dialogs.rb:62 +#: src/include/support/dialogs.rb:62 msgid "This will start a browser connecting to the SUSE Support Center Portal." msgstr "브라우저가 시작되어 SUSE 지원 센터 포털로 연결됩니다." -#: src/include/support/dialogs.rb:72 +#: src/include/support/dialogs.rb:72 msgid "Open" msgstr "열기" -#: src/include/support/dialogs.rb:83 +#: src/include/support/dialogs.rb:83 msgid "Collect Data" msgstr "데이터 수집" -#: src/include/support/dialogs.rb:88 +#: src/include/support/dialogs.rb:88 msgid "This will create a tarball containing the collected log files." msgstr "수집된 로그 파일이 포함된 tarball이 생성됩니다." -#: src/include/support/dialogs.rb:100 +#: src/include/support/dialogs.rb:100 msgid "Create report tarball" msgstr "보고서 Tarball 생성" -#: src/include/support/dialogs.rb:112 +#: src/include/support/dialogs.rb:112 msgid "Upload Data" msgstr "데이터 업로드" -#: src/include/support/dialogs.rb:116 +#: src/include/support/dialogs.rb:116 msgid "This will upload the collected logs to the specified URL." msgstr "수집된 로그가 지정한 URL로 업로드됩니다." -#: src/include/support/dialogs.rb:123 +#: src/include/support/dialogs.rb:123 msgid "Upload" msgstr "업로드" -#: src/include/support/dialogs.rb:153 +#: src/include/support/dialogs.rb:153 msgid "Could not find any installed browser." msgstr "설치된 브라우저를 찾을 수 없습니다." -#: src/include/support/dialogs.rb:163 +#: src/include/support/dialogs.rb:163 msgid "" "YaST will run a Web browser as superuser. Consider\n" "running it as a non-provileged user and entering the URL\n" @@ -87,189 +87,189 @@ "%1을(를) 입력하십시오.\n" "웹 브라우저를 시작하시겠습니까?\n" -#: src/include/support/dialogs.rb:205 +#: src/include/support/dialogs.rb:205 msgid "Supportconfig Upload Dialog" msgstr "Supportconfig 업로드 대화 상자" -#. Support configure1 dialog contents -#: src/include/support/dialogs.rb:230 +#. Support configure1 dialog contents +#: src/include/support/dialogs.rb:230 msgid "Save as" msgstr "다른 이름으로 저장" -#: src/include/support/dialogs.rb:233 +#: src/include/support/dialogs.rb:233 msgid "Directory to Save" msgstr "저장할 디렉토리" -#: src/include/support/dialogs.rb:243 +#: src/include/support/dialogs.rb:243 msgid "Package with log files" msgstr "로그 파일이 있는 패키지" -#: src/include/support/dialogs.rb:257 +#: src/include/support/dialogs.rb:257 msgid "Upload log files tarball to URL" msgstr "URL에 로그 파일 tarball 업로드" -#: src/include/support/dialogs.rb:259 src/include/support/dialogs.rb:760 +#: src/include/support/dialogs.rb:259 src/include/support/dialogs.rb:760 msgid "Upload Target" msgstr "대상 업로드" -#. } -#: src/include/support/dialogs.rb:331 +#. } +#: src/include/support/dialogs.rb:331 msgid "Cannot write settings" msgstr "설정을 기록할 수 없습니다." -#: src/include/support/dialogs.rb:347 +#: src/include/support/dialogs.rb:347 msgid "Cannot write settings." msgstr "설정을 쓸 수 없습니다." -#: src/include/support/dialogs.rb:393 +#: src/include/support/dialogs.rb:393 msgid "Choose Directory Where to Save Tarball" msgstr "Tarball을 저장할 디렉토리 선택" -#. Support::log_files["tmp_dir"]=save_dir; -#: src/include/support/dialogs.rb:405 +#. Support::log_files["tmp_dir"]=save_dir; +#: src/include/support/dialogs.rb:405 msgid "Choose Log Files Tarball File" msgstr "로그 파일 Tarball 파일 선택" -#. Command line parameters dialog caption -#: src/include/support/dialogs.rb:425 +#. Command line parameters dialog caption +#: src/include/support/dialogs.rb:425 msgid "Supportconfig Parameters Configuration" msgstr "Supportconfig 파라미터 구성" -#: src/include/support/dialogs.rb:430 +#: src/include/support/dialogs.rb:430 msgid "Create a full file listing from '/'" msgstr "'/'에서 전체 파일 목록 생성" -#: src/include/support/dialogs.rb:435 +#: src/include/support/dialogs.rb:435 msgid "Exclude detailed disk info and scans" msgstr "세부 디스크 정보 및 검색 제외" -#: src/include/support/dialogs.rb:440 +#: src/include/support/dialogs.rb:440 msgid "Search root filesystem for eDirectory instances" msgstr "eDirectory 인스턴스에 대한 루트 파일 시스템 검색" -#: src/include/support/dialogs.rb:445 +#: src/include/support/dialogs.rb:445 msgid "Include full SLP service lists" msgstr "전체 SLP 서비스 목록 포함" -#: src/include/support/dialogs.rb:450 +#: src/include/support/dialogs.rb:450 msgid "Performs an rpm -V for each installed rpm" msgstr "설치된 각 RPM에 대해 RPM -V 수행" -#: src/include/support/dialogs.rb:455 +#: src/include/support/dialogs.rb:455 msgid "Include all log file lines, gather additional rotated logs" msgstr "모든 로그 파일 줄 포함, 추가 순환 로그 수집" -#. Support configure1 dialog contents -#: src/include/support/dialogs.rb:469 +#. Support configure1 dialog contents +#: src/include/support/dialogs.rb:469 msgid "Use Defaults (ignore /etc/supportconfig.conf)" msgstr "기본값 사용(/etc/supportconfig.conf 무시)" -#: src/include/support/dialogs.rb:476 +#: src/include/support/dialogs.rb:476 msgid "Activates all support functions" msgstr "모든 지원 기능 활성화" -#: src/include/support/dialogs.rb:483 +#: src/include/support/dialogs.rb:483 msgid "Only gather a minimum amount of info" msgstr "최소의 정보만 수집" -#: src/include/support/dialogs.rb:491 +#: src/include/support/dialogs.rb:491 msgid "Use Custom (Expert) Settings" msgstr "사용자 정의(고급) 설정 사용" -#: src/include/support/dialogs.rb:493 +#: src/include/support/dialogs.rb:493 msgid "Expert Settings" msgstr "고급 설정" -#: src/include/support/dialogs.rb:499 +#: src/include/support/dialogs.rb:499 msgid "Options" msgstr "옵션" -#. Support overview dialog caption -#: src/include/support/dialogs.rb:588 +#. Support overview dialog caption +#: src/include/support/dialogs.rb:588 msgid "Supportconfig Expert Configuration" msgstr "Supportconfig 고급 구성" -#. FIXME table header -#: src/include/support/dialogs.rb:618 +#. FIXME table header +#: src/include/support/dialogs.rb:618 msgid "Default Options" msgstr "기본 옵션" -#. Support configure2 dialog caption -#: src/include/support/dialogs.rb:684 +#. Support configure2 dialog caption +#: src/include/support/dialogs.rb:684 msgid "Supportconfig Contact Configuration" msgstr "Supportconfig 연락처 구성" -#. Support configure2 dialog contents -#: src/include/support/dialogs.rb:689 +#. Support configure2 dialog contents +#: src/include/support/dialogs.rb:689 msgid "Contact Information" msgstr "연락처 정보" -#: src/include/support/dialogs.rb:694 +#: src/include/support/dialogs.rb:694 msgid "Company" msgstr "회사" -#: src/include/support/dialogs.rb:705 +#: src/include/support/dialogs.rb:705 msgid "Email Address" msgstr "전자 메일 주소" -#: src/include/support/dialogs.rb:712 +#: src/include/support/dialogs.rb:712 msgid "Name" msgstr "이름" -#: src/include/support/dialogs.rb:719 +#: src/include/support/dialogs.rb:719 msgid "Phone Number" msgstr "전화 번호" -#: src/include/support/dialogs.rb:726 +#: src/include/support/dialogs.rb:726 msgid "Store ID" msgstr "저장 ID" -#: src/include/support/dialogs.rb:737 +#: src/include/support/dialogs.rb:737 msgid "Terminal ID" msgstr "터미널 ID" -#: src/include/support/dialogs.rb:748 +#: src/include/support/dialogs.rb:748 msgid "GPG UID" msgstr "GPG UID" -#: src/include/support/dialogs.rb:755 +#: src/include/support/dialogs.rb:755 msgid "Upload Information" msgstr "업로드 정보" -#: src/include/support/dialogs.rb:774 +#: src/include/support/dialogs.rb:774 msgid "11-digit service request number" msgstr "Novell 11자리 서비스 요청 번호" -#. abort? -#: src/include/support/dialogs.rb:851 +#. abort? +#: src/include/support/dialogs.rb:851 msgid "The SR number must be 11 digits" msgstr "SR 번호는 11자리여야 합니다." -#: src/include/support/dialogs.rb:869 +#: src/include/support/dialogs.rb:869 msgid "Collecting Data" msgstr "데이터 수집 중" -#: src/include/support/dialogs.rb:870 +#: src/include/support/dialogs.rb:870 msgid "Progress" msgstr "진행" -#. Remove ANSI escape codes for cursor movement (bnc#921233) -#: src/include/support/dialogs.rb:939 +#. Remove ANSI escape codes for cursor movement (bnc#921233) +#: src/include/support/dialogs.rb:939 msgid "Collected Data Review" msgstr "수집된 데이터 검토" -#. FIXME use list of generated files, as well as directory prefix -#. `MultiLineEdit (`id (`file), `opt (`read_only), _("File Contents")) -#: src/include/support/dialogs.rb:986 src/include/support/dialogs.rb:1034 +#. FIXME use list of generated files, as well as directory prefix +#. `MultiLineEdit (`id (`file), `opt (`read_only), _("File Contents")) +#: src/include/support/dialogs.rb:986 src/include/support/dialogs.rb:1034 msgid "File Name" msgstr "파일 이름" -#: src/include/support/dialogs.rb:992 +#: src/include/support/dialogs.rb:992 msgid "Remove from Data" msgstr "데이터에서 제거" -#. Read dialog help 1/2 -#: src/include/support/helps.rb:36 +#. Read dialog help 1/2 +#: src/include/support/helps.rb:36 msgid "" "<p><b><big>Initializing Support Configuration</big></b><br>\n" "</p>\n" @@ -277,8 +277,8 @@ "<p><b><big>지원 구성 초기화</big></b><br>\n" "</p>\n" -#. Read dialog help 2/2 -#: src/include/support/helps.rb:40 +#. Read dialog help 2/2 +#: src/include/support/helps.rb:40 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -286,8 +286,8 @@ "<p><b><big>초기화 중단:</big></b><br>\n" "지금 <b>중단</b>을 눌러 구성 유틸리티를 안전하게 중단하십시오.</p>\n" -#. Write dialog help 1/2 -#: src/include/support/helps.rb:44 +#. Write dialog help 1/2 +#: src/include/support/helps.rb:44 msgid "" "<p><b><big>Saving Support Configuration</big></b><br>\n" "</p>\n" @@ -295,8 +295,8 @@ "<p><b><big>지원 구성 저장</big></b><br>\n" "</p>\n" -#. Write dialog help 2/2 -#: src/include/support/helps.rb:48 +#. Write dialog help 2/2 +#: src/include/support/helps.rb:48 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -308,8 +308,8 @@ "이 작업이 안전한지 여부를 알려 주는 추가 대화 상자가 나타납니다.\n" "</p>\n" -#. Summary dialog help 1/3 -#: src/include/support/helps.rb:55 +#. Summary dialog help 1/3 +#: src/include/support/helps.rb:55 msgid "" "<p><b><big>Support Configuration</big></b><br>\n" "Configure support here.<br></p>\n" @@ -317,8 +317,8 @@ "<p><b><big>지원 구성</big></b><br>\n" "여기서 지원을 구성합니다.</br></p>\n" -#. Summary dialog help 2/3 -#: src/include/support/helps.rb:59 +#. Summary dialog help 2/3 +#: src/include/support/helps.rb:59 msgid "" "<p><b><big>Adding a support:</big></b><br>\n" "Choose a support from the list of detected supports.\n" @@ -330,8 +330,8 @@ "지원이 검색되지 않은 경우 <b>기타(검색되지 않음)</b>를 사용하십시오.\n" "그런 다음 <b>구성</b>을 누르십시오.</p>\n" -#. Summary dialog help 3/3 -#: src/include/support/helps.rb:66 +#. Summary dialog help 3/3 +#: src/include/support/helps.rb:66 msgid "" "<p><b><big>Editing or Deleting:</big></b><br>\n" "If you press <b>Edit</b>, an additional dialog in which to change\n" @@ -341,61 +341,54 @@ "<b>편집</b>을 누르면 구성을 변경할 수 있는 추가 대화 상자가\n" "열립니다.</p>\n" -#. Ovreview dialog help 1/3 -#: src/include/support/helps.rb:72 +#. Ovreview dialog help 1/3 +#: src/include/support/helps.rb:72 msgid "" "\n" "<p><b><big>Opening SUSE Support Center</big></b><br>\n" -"To start a Web browser that opens the SUSE Support Center Portal, use " -"<b>Open SUSE Support Center</b>.\n" -"You can then open a Service Request with Global Technical Support. Make sure " -"you write down\n" +"To start a Web browser that opens the SUSE Support Center Portal, use <b>Open SUSE Support Center</b>.\n" +"You can then open a Service Request with Global Technical Support. Make sure you write down\n" "the Service Request number to include in the supportconfig data upload.</p>\n" msgstr "" "\n" "<p><b><big>SUSE 지원 센터 열기</big></b><br>\n" -"SUSE 지원 센터 포털을 여는 웹 브라우저를 시작하려면 <b>SUSE 지원 센터 열기를 사용하십시오.\n" +"SUSE 지원 센터 포털을 여는 웹 브라우저를 시작하려면 <b>SUSE 지원 센터 열기</b>를 사용하십시오.\n" "그런 다음 글로벌 기술 지원과 함께 서비스 요청을 열 수 있습니다.\n" -"supportconfig 데이터 업로드에 포함할 서비스 요청 번호를 기록했는지 확인하십시" -"오.</p>\n" +"supportconfig 데이터 업로드에 포함할 서비스 요청 번호를 기록했는지 확인하십시오.</p>\n" -#. Ovreview dialog help 2/3 -#: src/include/support/helps.rb:80 +#. Ovreview dialog help 2/3 +#: src/include/support/helps.rb:80 msgid "" "<p><b><big>Collecting Data</big></b><br>\n" "To run the supportconfig data collection tool, use <b>Collect Data</b></p>" msgstr "" "<p><b><big>데이터 수집</big></b><br>\n" -"supportconfig 데이터 모음 도구를 실행하려면 <b>데이터 수집</b>을 사용하십시" -"오.</p>" +"supportconfig 데이터 모음 도구를 실행하려면 <b>데이터 수집</b>을 사용하십시오.</p>" -#. Ovreview dialog help 3/3 -#: src/include/support/helps.rb:84 +#. Ovreview dialog help 3/3 +#: src/include/support/helps.rb:84 msgid "" "<p><b><big>Uploading Collected Data</big></b><br>\n" "To upload the data already collected to a server, use <b>Upload Data</b>.\n" "The server may or may not be Global Technical Support.</p>" msgstr "" "<p><b><big>수집된 데이터 업로드</big></b><br>\n" -"이미 수집된 데이터를 서버에 업로드하려면 <b>데이터 업로드</b>를 사용하십시" -"오.\n" +"이미 수집된 데이터를 서버에 업로드하려면 <b>데이터 업로드</b>를 사용하십시오.\n" "서버에 글로벌 기술 지원이 적용될 수도 있고, 적용되지 않을 수도 있습니다.</p>" -#. Configure1 dialog help 1/3 -#: src/include/support/helps.rb:90 +#. Configure1 dialog help 1/3 +#: src/include/support/helps.rb:90 msgid "" "<p><b><big>Supportconfig Options</big></b><br>\n" -"Select an option to override the defaults. You can use the default " -"settings,\n" +"Select an option to override the defaults. You can use the default settings,\n" "gather the most data or only gather a minimum amount of data." msgstr "" "<p><b><big>Supportconfig 옵션</big></b><br>\n" "기본값을 무효화할 옵션을 선택합니다. 기본 설정을 사용하여\n" "대부분의 데이터를 수집하거나, 최소한의 데이터만 수집할 수 있습니다." -#. Configure1 dialog help 2/3 -#: src/include/support/helps.rb:96 +#. Configure1 dialog help 2/3 +#: src/include/support/helps.rb:96 msgid "" "<p><b><big>Expert Settings</big></b><br>\n" "Select <b>Use Custom</b> and click the <b>Expert Settings</b> button\n" @@ -405,92 +398,76 @@ "<b>사용자 정의 사용</b>을 선택하고 <b>고급 설정</b> 버튼을 클릭하여\n" "수집할 특정 데이터 집합을 선택합니다.</p>\n" -#. Configure1 dialog help 3/3 -#: src/include/support/helps.rb:102 +#. Configure1 dialog help 3/3 +#: src/include/support/helps.rb:102 msgid "" "<p><b><big>Options</big></b><br>\n" "Collect additional information. Usually these options are not\n" -"necessary, but can be included if circumstances require more information.\n" +"necessary, but can be included if circumstances require more information.</p>\n" msgstr "" "<p><b><big>옵션</big></b><br>\n" "추가 정보를 수집합니다. 일반적으로 이러한 옵션은\n" "필요하지 않지만 추가 정보가 필요한 경우 포함할 수 있습니다.</p>\n" -#. Expert dialog help 1/1 -#: src/include/support/helps.rb:108 +#. Expert dialog help 1/1 +#: src/include/support/helps.rb:108 msgid "" "<p><big><b>Default Options</b></big><br>\n" -"Select or deselect each of the data sets you would like to include in the " -"supportconfig tarball.</p>" +"Select or deselect each of the data sets you would like to include in the supportconfig tarball.</p>" msgstr "" "<p><big><b>기본 옵션</b></big><br>\n" -"supportconfig tarball에 포함할 각 데이터 세트를 선택하거나 선택 취소합니다." +"supportconfig tarball에 포함할 각 데이터 세트를 선택하거나 선택 취소합니다.</p>" -#. Contact dialog help 1/4 -#: src/include/support/helps.rb:112 +#. Contact dialog help 1/4 +#: src/include/support/helps.rb:112 msgid "" "<p><big><b>Contact Information</b></big><br>\n" -"Fill in each of the contact information fields that you would like to " -"include\n" -"in the supportconfig tarball. The fields are saved in the basic-environment." -"txt file.</p>" +"Fill in each of the contact information fields that you would like to include\n" +"in the supportconfig tarball. The fields are saved in the basic-environment.txt file.</p>" msgstr "" "<p><big><b>연락처 정보</b></big><br>\n" "supportconfig tarball에 포함할 연락처 정보 필드를 각각 입력합니다.\n" "이 필드는 basic-environment.txt 파일에 저장됩니다.</p>" -#. Contact dialog help 2/4 -#: src/include/support/helps.rb:118 +#. Contact dialog help 2/4 +#: src/include/support/helps.rb:118 msgid "" "<p><b><big>Upload Information</big></b><br>\n" -"The upload target is the supportconfig tarball's destination URI. Supported " -"upload services include\n" -"ftp, http, https, scp. If you need to include the supportconfig tarball " -"filename in your upload target,\n" -"use the <i>tarball</i> keyword. This will get replaced with the actual " -"tarball filename.\n" +"The upload target is the supportconfig tarball's destination URI. Supported upload services include\n" +"ftp, http, https, scp. If you need to include the supportconfig tarball filename in your upload target,\n" +"use the <i>tarball</i> keyword. This will get replaced with the actual tarball filename.\n" "See <i>man supportconfig(1)</i> for further details.</p>" msgstr "" "<p><b><big>업로드 정보</big></b><br>\n" -"업로드 대상은 supportconfig tarball의 대상 URI입니다. 지원되는 업로드 서비스" -"에는 ftp, http, https, scp가 포함됩니다.\n" +"업로드 대상은 supportconfig tarball의 대상 URI입니다. 지원되는 업로드 서비스에는 ftp, http, https, scp가 포함됩니다.\n" "supportconfig tarball 파일 이름을 업로드 대상에 포함시키려면\n" -"<i>tarball</i> 키워드를 사용하십시오. 이렇게 하면 실제 tarball 파일 이름으로 " -"대체됩니다.\n" +"<i>tarball</i> 키워드를 사용하십시오. 이렇게 하면 실제 tarball 파일 이름으로 대체됩니다.\n" "자세한 내용은 <i>man supportconfig(1)</i>를 참조하십시오.</p>" -#. Contact dialog help 3/4 -#: src/include/support/helps.rb:126 +#. Contact dialog help 3/4 +#: src/include/support/helps.rb:126 msgid "" "<p><b><big>Upload Target Examples</big></b><br>\n" -"https://secure-www.novell.com/upload?appname=supportconfig&file=<i>tarball<br>\n" +"https://secure-www.novell.com/upload?appname=supportconfig&file=<i>tarball</i><br>\n" "ftp://ftp.novell.com/incoming<br>\n" "scp://central.server.foo.com/supportconfig/archives</p>" msgstr "" "<p><b><big>업로드 대상 예</big></b><br>\n" -"https://secure-www.novell.com/upload?appname=supportconfig&file=<i>tarball<br>\n" +"https://secure-www.novell.com/upload?appname=supportconfig&file=<i>tarball</i><br>\n" "ftp://ftp.novell.com/incoming<br>\n" "scp://central.server.foo.com/supportconfig/archives</p>" -#. Contact dialog help 4/4 -#: src/include/support/helps.rb:133 +#. Contact dialog help 4/4 +#: src/include/support/helps.rb:133 msgid "" -"<p><b>Note:</b> If you are uploading a supportconfig tarball to Global " -"Technical Support,\n" -"make sure you include the 11-digit service request number from your open " -"service request.\n" +"<p><b>Note:</b> If you are uploading a supportconfig tarball to Global Technical Support,\n" +"make sure you include the 11-digit service request number from your open service request.\n" msgstr "" -"<p><b>참고:</b> supportconfig tarball을 글로벌 기술 지원으로 업로드하는 경" -"우\n" -"Novell 11자리 서비스 요청 번호가 미결 서비스 요청에 포함되어 있는지 확인하십" -"시오.\n" +"<p><b>참고:</b> supportconfig tarball을 글로벌 기술 지원으로 업로드하는 경우\n" +"Novell 11자리 서비스 요청 번호가 미결 서비스 요청에 포함되어 있는지 확인하십시오.\n" -#. Collecting data dialkog help 1/1 -#: src/include/support/helps.rb:137 +#. Collecting data dialkog help 1/1 +#: src/include/support/helps.rb:137 msgid "" "<p><b><big>Collecting Data</big></b>><br>\n" "Data is being collected.</p>\n" @@ -498,24 +475,21 @@ "<p><b><big>데이터 수집</big></b>><br>\n" "데이터를 수집 중입니다.</p>\n" -#. Data review dialog help 1/1 -#: src/include/support/helps.rb:141 +#. Data review dialog help 1/1 +#: src/include/support/helps.rb:141 msgid "" "<p><b><big>Collected Data Review</big></b><br>\n" -"Review the data collected by supportconfig. If you do not want to share some " -"of the collected data,\n" +"Review the data collected by supportconfig. If you do not want to share some of the collected data,\n" "use <b>Remove from Data</b> and the selected file will be removed.</p>\n" msgstr "" "<p><b><big>수집된 데이터 검토</big></b><br>\n" -"supportconfig에서 수집된 데이터를 검토합니다. 수집된 데이터 중 일부를 공유하" -"지 않으려는 경우\n" +"supportconfig에서 수집된 데이터를 검토합니다. 수집된 데이터 중 일부를 공유하지 않으려는 경우\n" "<b>데이터에서 제거</b>를 사용하면 선택한 파일이 제거됩니다.</p>\n" -#. Configure1 dialog help 1/3 -#: src/include/support/helps.rb:148 +#. Configure1 dialog help 1/3 +#: src/include/support/helps.rb:148 msgid "" -"<p><b><big>Upload supportconfig tarball to Global Technical Support</big><br>\n" +"<p><b><big>Upload supportconfig tarball to Global Technical Support</big></b><br>\n" "If you want to store a copy of the supportconfig tarball, select the target\n" "directory and make sure that this option is checked.\n" "<br></p>\n" @@ -525,13 +499,12 @@ "디렉토리를 선택하고 이 옵션이 선택되었는지 확인하십시오.\n" "<br></p>\n" -#. Configure1 dialog help 2/3 -#. Configure1 dialog help 2/3 -#: src/include/support/helps.rb:155 src/include/support/helps.rb:180 +#. Configure1 dialog help 2/3 +#. Configure1 dialog help 2/3 +#: src/include/support/helps.rb:155 src/include/support/helps.rb:180 msgid "" "<p><b><big>Upload URL</big></b><br>\n" -"This option has the location to which the supportconfig tarball will be " -"uploaded\n" +"This option has the location to which the supportconfig tarball will be uploaded\n" "as default value.\n" "Change this value only in special cases.\n" "</p>\n" @@ -542,9 +515,9 @@ "특별한 경우에만 이 값을 변경하십시오.\n" "</p>\n" -#. Configure1 dialog help 3/3, %1 is a URL -#. Configure1 dialog help 3/3 -#: src/include/support/helps.rb:164 src/include/support/helps.rb:189 +#. Configure1 dialog help 3/3, %1 is a URL +#. Configure1 dialog help 3/3 +#: src/include/support/helps.rb:164 src/include/support/helps.rb:189 msgid "" "<p><b><big>Privacy Policy</big></b><br>\n" "Find SUSE's privacy policy at\n" @@ -554,10 +527,9 @@ "SUSE의 개인 정보 보호 정책은 <i>%1</i>에서\n" "확인할 수 있습니다.</p>\n" -#: src/include/support/helps.rb:173 +#: src/include/support/helps.rb:173 msgid "" -"<p><b><big>Upload supportconfig tarball to Global Technical Support</big><br>\n" +"<p><b><big>Upload supportconfig tarball to Global Technical Support</big></b><br>\n" "If you have already created the supportconfig tarball, write the full path\n" "into the <i>Package with log files</i> field.\n" "<br></p>\n" @@ -567,8 +539,8 @@ "<i>로그 파일이 있는 패키지</i> 필드에 전체 경로를 씁니다.\n" "<br></p>\n" -#. Configure2 dialog help 1/2 -#: src/include/support/helps.rb:198 +#. Configure2 dialog help 1/2 +#: src/include/support/helps.rb:198 msgid "" "<p><b><big>Configuration Part Two</big></b><br>\n" "Press <b>Next</b> to continue.\n" @@ -578,8 +550,8 @@ "<b>다음</b>을 눌러 계속하십시오.\n" "<br></p>\n" -#. Configure2 dialog help 2/2 -#: src/include/support/helps.rb:204 +#. Configure2 dialog help 2/2 +#: src/include/support/helps.rb:204 msgid "" "<p><b><big>Selecting Something</big></b><br>\n" "It is not possible. You must code it first. :-)\n" @@ -589,418 +561,350 @@ "사용할 수 없습니다. 먼저 코딩을 해야 합니다.\n" " </p>" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2008 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#: src/include/support/supportconfig_conf.rb:30 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2008 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#: src/include/support/supportconfig_conf.rb:30 msgid "AppArmor information. security-apparmor.txt" msgstr "AppArmor 정보. security-apparmor.txt" -#: src/include/support/supportconfig_conf.rb:33 +#: src/include/support/supportconfig_conf.rb:33 msgid "autofs information. fs-autofs.txt" msgstr "autofs 정보. fs-autofs.txt" -#: src/include/support/supportconfig_conf.rb:36 +#: src/include/support/supportconfig_conf.rb:36 msgid "Information related to booting and the kernel. boot.txt" msgstr "부팅 및 커널 관련 정보. boot.txt" -#: src/include/support/supportconfig_conf.rb:39 +#: src/include/support/supportconfig_conf.rb:39 msgid "Current system service states. chkconfig.txt" msgstr "현재 시스템 서비스 상태. chkconfig.txt" -#: src/include/support/supportconfig_conf.rb:42 +#: src/include/support/supportconfig_conf.rb:42 msgid "Information related to capturing a system core dump. crash.txt" msgstr "시스템 코어 덤프 캡처 관련 정보. crash.txt" -#: src/include/support/supportconfig_conf.rb:45 +#: src/include/support/supportconfig_conf.rb:45 msgid "Information related to cron and at. cron.txt" msgstr "CRON 및 AT 관련 정보. cron.txt" -#: src/include/support/supportconfig_conf.rb:48 +#: src/include/support/supportconfig_conf.rb:48 msgid "Disk, file system mounts and partition information. fs-diskio.txt" msgstr "디스크, 파일 시스템 마운트 및 파티션 정보. fs-diskio.txt" -#: src/include/support/supportconfig_conf.rb:51 +#: src/include/support/supportconfig_conf.rb:51 msgid "Domain Name Service information. dns.txt" msgstr "도메인 이름 서비스 정보. dns.txt" -#: src/include/support/supportconfig_conf.rb:54 +#: src/include/support/supportconfig_conf.rb:54 msgid "Novell eDirectory health check information. novell-edir.txt" msgstr "Novell eDirectory 상태 점검 정보. novell-edir.txt" -#: src/include/support/supportconfig_conf.rb:57 -msgid "" -"System environment information, including sysctl and root's environment. env." -"txt" +#: src/include/support/supportconfig_conf.rb:57 +msgid "System environment information, including sysctl and root's environment. env.txt" msgstr "sysctl 및 루트 환경을 포함하는 시스템 환경 정보. env.txt" -#: src/include/support/supportconfig_conf.rb:60 -msgid "" -"Recursively gets *.conf files, along with various other configuration files " -"in /etc. etc.txt" -msgstr "" -"/etc의 기타 다양한 구성 파일과 함께 반복적으로 *.conf 파일 가져오기. etc.txt" +#: src/include/support/supportconfig_conf.rb:60 +msgid "Recursively gets *.conf files, along with various other configuration files in /etc. etc.txt" +msgstr "/etc의 기타 다양한 구성 파일과 함께 반복적으로 *.conf 파일 가져오기. etc.txt" -#: src/include/support/supportconfig_conf.rb:63 +#: src/include/support/supportconfig_conf.rb:63 msgid "Enterprise Volume Management System-related information. evms.txt" msgstr "Enterprise Volume Management System 관련 정보입니다. evms.txt" -#: src/include/support/supportconfig_conf.rb:66 +#: src/include/support/supportconfig_conf.rb:66 msgid "Heartbeat/high availabilty cluster information. ha.txt" msgstr "하트비트/고가용성 클러스터 정보. ha.txt" -#: src/include/support/supportconfig_conf.rb:69 +#: src/include/support/supportconfig_conf.rb:69 msgid "iSCSI target and initiator information. fs-iscsi.txt" msgstr "iSCSI 대상 및 이니시에이터 정보. fs-iscsi.txt" -#: src/include/support/supportconfig_conf.rb:72 +#: src/include/support/supportconfig_conf.rb:72 msgid "LDAP related information, including a root DSE search. ldap.txt" msgstr "루트 DSE 검색을 포함한 LDAP 관련 정보. ldap.txt" -#: src/include/support/supportconfig_conf.rb:75 -msgid "" -"Novell Linux User Management-related information, including a root DSE, UNIX " -"Config and workstation object searches. novell-lum.txt" -msgstr "" -"루트 DSE, UNIX 구성 및 워크스테이션 객체 검색을 비롯한 Novell Linux User " -"Management 관련 정보입니다. novell-lum.txt" +#: src/include/support/supportconfig_conf.rb:75 +msgid "Novell Linux User Management-related information, including a root DSE, UNIX Config and workstation object searches. novell-lum.txt" +msgstr "루트 DSE, UNIX 구성 및 워크스테이션 객체 검색을 비롯한 Novell Linux User Management 관련 정보입니다. novell-lum.txt" -#: src/include/support/supportconfig_conf.rb:78 +#: src/include/support/supportconfig_conf.rb:78 msgid "Linux Volume Management-related information. lvm.txt" msgstr "Linux Volume Management 관련 정보입니다. lvm.txt" -#: src/include/support/supportconfig_conf.rb:81 +#: src/include/support/supportconfig_conf.rb:81 msgid "Memory-related information. memory.txt" msgstr "메모리 관련 정보입니다. memory.txt" -#: src/include/support/supportconfig_conf.rb:84 +#: src/include/support/supportconfig_conf.rb:84 msgid "System kernel module information. modules.txt" msgstr "시스템 커널 모듈 정보. modules.txt" -#: src/include/support/supportconfig_conf.rb:87 +#: src/include/support/supportconfig_conf.rb:87 msgid "Native device mapper multipathing information. mpio.txt" msgstr "고유 장치 매퍼 다중 경로 정보. mpio.txt" -#: src/include/support/supportconfig_conf.rb:90 +#: src/include/support/supportconfig_conf.rb:90 msgid "Novell Core Protocol-related information. novell-ncp.txt" msgstr "Novell Core Protocol 관련 정보입니다. novell-ncp.txt" -#: src/include/support/supportconfig_conf.rb:93 +#: src/include/support/supportconfig_conf.rb:93 msgid "Novell Cluster Services-related information. novell-ncs.txt" msgstr "Novell Cluster Services 관련 정보입니다. novell-ncs.txt" -#: src/include/support/supportconfig_conf.rb:96 +#: src/include/support/supportconfig_conf.rb:96 msgid "Network-related information, including firewall rules. network.txt" msgstr "방화벽 규칙을 비롯한 네트워크 관련 정보입니다. network.txt" -#: src/include/support/supportconfig_conf.rb:99 +#: src/include/support/supportconfig_conf.rb:99 msgid "Network File System-related information. nfs.txt" msgstr "네트워크 파일 시스템 관련 정보입니다. nfs.txt" -#: src/include/support/supportconfig_conf.rb:102 +#: src/include/support/supportconfig_conf.rb:102 msgid "Novell Storage Services-related information. novell-nss.txt" msgstr "Novell Storage Services 관련 정보입니다. novell-nss.txt" -#: src/include/support/supportconfig_conf.rb:105 +#: src/include/support/supportconfig_conf.rb:105 msgid "Network Time Protocol-related information. ntp.txt" msgstr "Network Time Protocol 관련 정보입니다. ntp.txt" -#: src/include/support/supportconfig_conf.rb:108 +#: src/include/support/supportconfig_conf.rb:108 msgid "OCFS2 file system-related information. ocfs2.txt" msgstr "OCFS2 파일 시스템 관련 정보입니다. ocfs2.txt" -#: src/include/support/supportconfig_conf.rb:111 +#: src/include/support/supportconfig_conf.rb:111 msgid "List of all open files using lsof. open-files.txt" msgstr "lsof를 사용한 모든 열린 파일 목록. open-files.txt" -#: src/include/support/supportconfig_conf.rb:114 +#: src/include/support/supportconfig_conf.rb:114 msgid "OpenWBEM-related information. openwbem.txt" msgstr "OpenWBEM 관련 정보입니다. openwbem.txt" -#: src/include/support/supportconfig_conf.rb:117 -msgid "" -"Pluggable Authentication Module-related information, including user account " -"information. pam.txt" -msgstr "" -"사용자 계정 정보를 비롯한 Pluggable Authentication Module 관련 정보입니다. " -"pam.txt" +#: src/include/support/supportconfig_conf.rb:117 +msgid "Pluggable Authentication Module-related information, including user account information. pam.txt" +msgstr "사용자 계정 정보를 비롯한 Pluggable Authentication Module 관련 정보입니다. pam.txt" -#: src/include/support/supportconfig_conf.rb:120 +#: src/include/support/supportconfig_conf.rb:120 msgid "Printing and CUPS-related information. print.txt" msgstr "인쇄 및 CUPS 관련 정보입니다. print.txt" -#: src/include/support/supportconfig_conf.rb:123 +#: src/include/support/supportconfig_conf.rb:123 msgid "Includes key /proc file content. proc.txt" msgstr "키/proc 파일 컨텐트 포함. proc.txt" -#: src/include/support/supportconfig_conf.rb:126 +#: src/include/support/supportconfig_conf.rb:126 msgid "Update daemon-related information. updates-daemon.txt" msgstr "업데이트 데몬 관련 정보입니다. updates-daemon.txt" -#: src/include/support/supportconfig_conf.rb:129 +#: src/include/support/supportconfig_conf.rb:129 msgid "Update client related information. updates.txt" msgstr "업데이트 클라이언트 관련 정보. updates.txt" -#: src/include/support/supportconfig_conf.rb:132 -msgid "" -"System Activity Reporting-related information, including copies of the SAR " -"data files. sar.txt" -msgstr "" -"SAR 데이터 파일 복사본을 비롯한 System Activity Reporting 관련 정보입니다. " -"sar.txt" +#: src/include/support/supportconfig_conf.rb:132 +msgid "System Activity Reporting-related information, including copies of the SAR data files. sar.txt" +msgstr "SAR 데이터 파일 복사본을 비롯한 System Activity Reporting 관련 정보입니다. sar.txt" -#: src/include/support/supportconfig_conf.rb:135 +#: src/include/support/supportconfig_conf.rb:135 msgid "SLES Real Time kernel-related information. slert.txt" msgstr "SLES Real Time 커널 관련 정보입니다. slert.txt" -#: src/include/support/supportconfig_conf.rb:138 +#: src/include/support/supportconfig_conf.rb:138 msgid "Service Location Protocol related information. slp.txt" msgstr "서비스 위치 프로토콜 관련 정보. slp.txt" -#: src/include/support/supportconfig_conf.rb:141 +#: src/include/support/supportconfig_conf.rb:141 msgid "" -"Self-Monitoring, Analysis, and Reporting Technology-related information for " -"hard disks. WARNING: Some hard disk controllers and drives do not\n" -"behave nicely. Probing SMART data has been known to change file systems to " -"read only mode or even hang the server. Make sure probing SMART data\n" +"Self-Monitoring, Analysis, and Reporting Technology-related information for hard disks. WARNING: Some hard disk controllers and drives do not\n" +"behave nicely. Probing SMART data has been known to change file systems to read only mode or even hang the server. Make sure probing SMART data\n" "works in your environment before enabling this option. fs-smartmon.txt\n" msgstr "" -"하드 디스크에 대한 Self-Monitoring, Analysis, and Reporting Technology 관련 " -"정보입니다. 경고: 일부 하드 디스크 컨트롤러 및 드라이브는\n" -"정상적으로 작동하지 않습니다. SMART 데이터 검사는 파일 시스템을 읽기 전용 모" -"드로 변경하거나 서버를 중단하는 것으로 알려져 있습니다. 이 옵션을 활성화하기 " -"전에 SMART 데이터 검사가\n" +"하드 디스크에 대한 Self-Monitoring, Analysis, and Reporting Technology 관련 정보입니다. 경고: 일부 하드 디스크 컨트롤러 및 드라이브는\n" +"정상적으로 작동하지 않습니다. SMART 데이터 검사는 파일 시스템을 읽기 전용 모드로 변경하거나 서버를 중단하는 것으로 알려져 있습니다. 이 옵션을 활성화하기 전에 SMART 데이터 검사가\n" "환경에서 작동하는지 확인하십시오. fs-smartmon.txt\n" -#: src/include/support/supportconfig_conf.rb:146 +#: src/include/support/supportconfig_conf.rb:146 msgid "Samba and CIFS-related information. samba.txt" msgstr "Samba 및 CIFS 관련 정보입니다. samba.txt" -#: src/include/support/supportconfig_conf.rb:149 +#: src/include/support/supportconfig_conf.rb:149 msgid "Software RAID-related information. fs-softraid.txt" msgstr "소프트웨어 RAID 관련 정보입니다. fs-softraid.txt" -#: src/include/support/supportconfig_conf.rb:152 +#: src/include/support/supportconfig_conf.rb:152 msgid "Secure Shell server information. ssh.txt" msgstr "보안 셸 서버 정보. ssh.txt" -#: src/include/support/supportconfig_conf.rb:155 +#: src/include/support/supportconfig_conf.rb:155 msgid "Configuration files found in /etc/sysconfig. sysconfig.txt" msgstr "/etc/sysconfig에서 검색한 구성 파일. sysconfig.txt" -#: src/include/support/supportconfig_conf.rb:158 +#: src/include/support/supportconfig_conf.rb:158 msgid "UDEV device manager-related information. udev.txt" msgstr "UDEV 장치 관리자 관련 정보입니다. udev.txt" -#: src/include/support/supportconfig_conf.rb:161 +#: src/include/support/supportconfig_conf.rb:161 msgid "X graphical system-related information. x.txt" msgstr "X 그래픽 시스템 관련 정보입니다. x.txt" -#: src/include/support/supportconfig_conf.rb:164 +#: src/include/support/supportconfig_conf.rb:164 msgid "XEN virtualization-related information. xen.txt" msgstr "XEN 가상화 관련 정보입니다. xen.txt" -#: src/include/support/supportconfig_conf.rb:167 -msgid "" -"Tells supportconfig to search the file system for all eDirectory instances " -"files. If set, ADD_OPTION_FSLIST is automatically set as well. -e" -msgstr "" -"supportconfig에 파일 시스템에서 모든 eDirectory 인스턴스 파일을 검색하도록 지" -"시합니다. 설정된 경우 ADD_OPTION_FSLIST도 자동으로 설정됩니다. -e" +#: src/include/support/supportconfig_conf.rb:167 +msgid "Tells supportconfig to search the file system for all eDirectory instances files. If set, ADD_OPTION_FSLIST is automatically set as well. -e" +msgstr "supportconfig에 파일 시스템에서 모든 eDirectory 인스턴스 파일을 검색하도록 지시합니다. 설정된 경우 ADD_OPTION_FSLIST도 자동으로 설정됩니다. -e" -#: src/include/support/supportconfig_conf.rb:170 -msgid "" -"A full file list using find from the root of the filesytem. -L, fs-files.txt" -msgstr "" -"파일 시스템의 루트에서 찾기를 사용하는 전체 파일 목록. -L, fs-files.txt" +#: src/include/support/supportconfig_conf.rb:170 +msgid "A full file list using find from the root of the filesytem. -L, fs-files.txt" +msgstr "파일 시스템의 루트에서 찾기를 사용하는 전체 파일 목록. -L, fs-files.txt" -#: src/include/support/supportconfig_conf.rb:173 -msgid "" -"Includes the entire log file, including comments, instead of just " -"VAR_OPTION_LINE_COUNT lines of it. Additional rotated logs are included if " -"available. -l" -msgstr "" -"VAR_OPTION_LINE_COUNT 행 대신에 주석을 포함하여 전체 로그 파일을 포함합니다. " -"추가적으로, 회전된 로그는 사용 가능한 경우 포함됩니다. -l" +#: src/include/support/supportconfig_conf.rb:173 +msgid "Includes the entire log file, including comments, instead of just VAR_OPTION_LINE_COUNT lines of it. Additional rotated logs are included if available. -l" +msgstr "VAR_OPTION_LINE_COUNT 행 대신에 주석을 포함하여 전체 로그 파일을 포함합니다. 추가적으로, 회전된 로그는 사용 가능한 경우 포함됩니다. -l" -#: src/include/support/supportconfig_conf.rb:176 +#: src/include/support/supportconfig_conf.rb:176 msgid "Minimizes the amount of disk information and detailed scanning. -d" msgstr "디스크 정보의 양과 세부 검색을 최소화합니다. -d" -#: src/include/support/supportconfig_conf.rb:179 -msgid "" -"Normally all of the /var/log/YaST2/* logs are included. This option " -"minimizes the amount of each file retrieved." -msgstr "" -"일반적으로 모든 /var/log/YaST2/* 로그가 포함됩니다. 이 옵션을 사용하면 검색되" -"는 각 파일 크기가 최소화됩니다." +#: src/include/support/supportconfig_conf.rb:179 +msgid "Normally all of the /var/log/YaST2/* logs are included. This option minimizes the amount of each file retrieved." +msgstr "일반적으로 모든 /var/log/YaST2/* 로그가 포함됩니다. 이 옵션을 사용하면 검색되는 각 파일 크기가 최소화됩니다." -#: src/include/support/supportconfig_conf.rb:182 -msgid "" -"Runs an rpm -V on every installed RPM package. This takes some time to " -"complete. -v, rpm-verify.txt" -msgstr "" -"설치된 모든 RPM 패키지에서 RPM -V를 실행합니다. 이 작업은 완료하는 데 시간이 " -"약간 소요됩니다. -v, rpm-verify.txt" +#: src/include/support/supportconfig_conf.rb:182 +msgid "Runs an rpm -V on every installed RPM package. This takes some time to complete. -v, rpm-verify.txt" +msgstr "설치된 모든 RPM 패키지에서 RPM -V를 실행합니다. 이 작업은 완료하는 데 시간이 약간 소요됩니다. -v, rpm-verify.txt" -#: src/include/support/supportconfig_conf.rb:185 -msgid "" -"Normally only the base SLP service types are listed. This option allows you " -"to query each of the discovered service types individually. -s, slp.txt" -msgstr "" -"일반적으로 베이스 SLP 서비스 유형만 나열됩니다. 이 옵션을 사용하면 검색된 서" -"비스 유형을 각각 개별적으로 쿼리할 수 있습니다. -s, slp.txt" +#: src/include/support/supportconfig_conf.rb:185 +msgid "Normally only the base SLP service types are listed. This option allows you to query each of the discovered service types individually. -s, slp.txt" +msgstr "일반적으로 베이스 SLP 서비스 유형만 나열됩니다. 이 옵션을 사용하면 검색된 서비스 유형을 각각 개별적으로 쿼리할 수 있습니다. -s, slp.txt" -#: src/include/support/supportconfig_conf.rb:188 +#: src/include/support/supportconfig_conf.rb:188 msgid "Company name to include in the basic-environment.txt" msgstr "basic-environment.txt에 포함할 회사 이름" -#: src/include/support/supportconfig_conf.rb:191 +#: src/include/support/supportconfig_conf.rb:191 msgid "Contact's email address to include in the basic-environment.txt" msgstr "basic-environment.txt에 포함할 연락처의 전자 메일 주소" -#: src/include/support/supportconfig_conf.rb:194 +#: src/include/support/supportconfig_conf.rb:194 msgid "Contact's name to include in the basic-environment.txt" msgstr "basic-environment.txt에 포함할 연락처의 이름" -#: src/include/support/supportconfig_conf.rb:197 +#: src/include/support/supportconfig_conf.rb:197 msgid "Contact's phone number to include in the basic-environment.txt" msgstr "basic-environment.txt에 포함할 연락처의 전화 번호" -#: src/include/support/supportconfig_conf.rb:200 -msgid "" -"The number of lines to include when getting a log file. Zero means get the " -"entire file." -msgstr "" -"로그 파일을 가져올 때 포함할 행 수. 0은 전체 파일을 가져온다는 의미입니다." +#: src/include/support/supportconfig_conf.rb:200 +msgid "The number of lines to include when getting a log file. Zero means get the entire file." +msgstr "로그 파일을 가져올 때 포함할 행 수. 0은 전체 파일을 가져온다는 의미입니다." -#: src/include/support/supportconfig_conf.rb:203 -msgid "" -"The supportconfig tarball location. The first valid location in the list is " -"always used." -msgstr "" -"supportconfig tarball 위치입니다. 목록에서 첫 번째 유효한 위치가 항상 사용됩" -"니다." +#: src/include/support/supportconfig_conf.rb:203 +msgid "The supportconfig tarball location. The first valid location in the list is always used." +msgstr "supportconfig tarball 위치입니다. 목록에서 첫 번째 유효한 위치가 항상 사용됩니다." -#: src/include/support/supportconfig_conf.rb:206 -msgid "" -"The maximum number of /var/log/messages lines to get. Zero means get the " -"entire file." -msgstr "" -"가져올 /var/log/messages 행의 최대 수. 0은 전체 파일을 가져온다는 의미입니다." +#: src/include/support/supportconfig_conf.rb:206 +msgid "The maximum number of /var/log/messages lines to get. Zero means get the entire file." +msgstr "가져올 /var/log/messages 행의 최대 수. 0은 전체 파일을 가져온다는 의미입니다." -#: src/include/support/supportconfig_conf.rb:209 -msgid "" -"The maximum number of heartbeat policy engine log files to include in the " -"supportconfig tarball." -msgstr "" -"supportconfig tarball에 포함할 하트비트 정책 엔진 로그 파일의 최대 수입니다." +#: src/include/support/supportconfig_conf.rb:209 +msgid "The maximum number of heartbeat policy engine log files to include in the supportconfig tarball." +msgstr "supportconfig tarball에 포함할 하트비트 정책 엔진 로그 파일의 최대 수입니다." -#: src/include/support/supportconfig_conf.rb:212 -msgid "" -"The maximum number of SAR data files to include in the supportconfig tarball." +#: src/include/support/supportconfig_conf.rb:212 +msgid "The maximum number of SAR data files to include in the supportconfig tarball." msgstr "supportconfig tarball에 포함할 SAR 데이터 파일의 최대 수입니다." -#: src/include/support/supportconfig_conf.rb:215 +#: src/include/support/supportconfig_conf.rb:215 msgid "" -"When set to 1, supportconfig runs in quiet mode. This option is useful if " -"you\n" -"plan on running supportconfig regularly in a cron job for example. Set with -" -"Q." +"When set to 1, supportconfig runs in quiet mode. This option is useful if you\n" +"plan on running supportconfig regularly in a cron job for example. Set with -Q." msgstr "" "1로 설정된 경우 supportconfig가 자동 모드로 실행됩니다. 예를 들어 이 옵션은\n" -"cron 작업에서 supportconfig를 정기적으로 실행하려는 경우에 유용합니다. -Q와 " -"함께 설정하십시오." +"cron 작업에서 supportconfig를 정기적으로 실행하려는 경우에 유용합니다. -Q와 함께 설정하십시오." -#: src/include/support/supportconfig_conf.rb:218 -msgid "" -"Used to specify where the supportconfig tarball will be uploaded, when using " -"the -u srnum startup option. You can specify any FTP server that supports " -"anonymous uploads. The default is SUSE's public ftp server." -msgstr "" -"-u srnum 시작 옵션을 사용할 경우 supportconfig tarball이 업로드될 위치를 지정" -"하는 데 사용됩니다. 익명 업로드를 지원하는 모든 FTP 서버를 지정할 수 있습니" -"다. 기본값은 SUSE의 공용 FTP 서버입니다." +#: src/include/support/supportconfig_conf.rb:218 +msgid "Used to specify where the supportconfig tarball will be uploaded, when using the -u srnum startup option. You can specify any FTP server that supports anonymous uploads. The default is SUSE's public ftp server." +msgstr "-u srnum 시작 옵션을 사용할 경우 supportconfig tarball이 업로드될 위치를 지정하는 데 사용됩니다. 익명 업로드를 지원하는 모든 FTP 서버를 지정할 수 있습니다. 기본값은 SUSE의 공용 FTP 서버입니다." -#. Initialization dialog caption -#: src/include/support/wizards.rb:147 +#. Initialization dialog caption +#: src/include/support/wizards.rb:147 msgid "Support Configuration" msgstr "지원 구성" -#. Initialization dialog contents -#: src/include/support/wizards.rb:149 +#. Initialization dialog contents +#: src/include/support/wizards.rb:149 msgid "Initializing..." msgstr "초기화 중..." -#. global string created_directory=""; -#: src/modules/Support.rb:143 +#. global string created_directory=""; +#: src/modules/Support.rb:143 msgid "To continue, enter root password" msgstr "계속하려면 루트 비밀번호를 입력하십시오." -#: src/modules/Support.rb:144 +#: src/modules/Support.rb:144 msgid "root Password" msgstr "루트 비밀번호" -#: src/modules/Support.rb:163 +#: src/modules/Support.rb:163 msgid "Password incorrect" msgstr "비밀번호가 틀립니다." -#. Support read dialog caption -#: src/modules/Support.rb:267 +#. Support read dialog caption +#: src/modules/Support.rb:267 msgid "Initializing Support Configuration" msgstr "지원 구성 초기화" -#. Support read dialog caption -#: src/modules/Support.rb:313 +#. Support read dialog caption +#: src/modules/Support.rb:313 msgid "Saving Support Configuration" msgstr "지원 구성 저장" -#. Progress stage 1/2 -#: src/modules/Support.rb:329 +#. Progress stage 1/2 +#: src/modules/Support.rb:329 msgid "Write the settings" msgstr "설정 쓰기" -#. Progress stage 2/2 -#: src/modules/Support.rb:331 +#. Progress stage 2/2 +#: src/modules/Support.rb:331 msgid "Run SuSEconfig" msgstr "SuSEconfig 실행" -#. Progress step 1/2 -#: src/modules/Support.rb:335 +#. Progress step 1/2 +#: src/modules/Support.rb:335 msgid "Writing the settings..." msgstr "설정을 쓰는 중..." -#. Progress step 2/2 -#: src/modules/Support.rb:337 +#. Progress step 2/2 +#: src/modules/Support.rb:337 msgid "Running SuSEconfig..." msgstr "SuSEconfig 실행 중..." -#. Progress finished -#: src/modules/Support.rb:339 +#. Progress finished +#: src/modules/Support.rb:339 msgid "Finished" msgstr "완료됨" -#. TODO FIXME: your code here... -#. Configuration summary text for autoyast -#: src/modules/Support.rb:438 +#. TODO FIXME: your code here... +#. Configuration summary text for autoyast +#: src/modules/Support.rb:438 msgid "Configuration summary..." msgstr "구성 요약..." Modified: branches/SLE12-SP3/yast/ko/po/sysconfig.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/sysconfig.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/sysconfig.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,85 +14,85 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. help text header - sysconfig editor -#: src/clients/sysconfig.rb:34 +#. help text header - sysconfig editor +#: src/clients/sysconfig.rb:34 msgid "Editor for /etc/sysconfig Files" msgstr "/etc/sysconfig 파일 편집기" -#. help text for command 'list' -#: src/clients/sysconfig.rb:48 +#. help text for command 'list' +#: src/clients/sysconfig.rb:48 msgid "Display configuration summary" msgstr "설정요약 보기" -#. help text for command 'set' 1/3 -#. Split string because of technical issues with line breaks. -#. Adjust translation with other two parts to give a clear final text. -#: src/clients/sysconfig.rb:58 +#. help text for command 'set' 1/3 +#. Split string because of technical issues with line breaks. +#. Adjust translation with other two parts to give a clear final text. +#: src/clients/sysconfig.rb:58 msgid "Set value of the variable. Requires options 'variable' and 'value'" msgstr "변수 값을 설정합니다. 'variable' 및 'value' 옵션" -#. help text for command 'set' 2/3 -#. Split string because of technical issues with line breaks. -#. Adjust translation with other two parts to give a clear final text. -#: src/clients/sysconfig.rb:64 +#. help text for command 'set' 2/3 +#. Split string because of technical issues with line breaks. +#. Adjust translation with other two parts to give a clear final text. +#: src/clients/sysconfig.rb:64 msgid "or 'variable=value', for example, variable=DISPLAYMANAGER value=gdm" msgstr "또는 'variable=value'(예: variable=DISPLAYMANAGER value=gdm)" -#. help text for command 'set' 3/3 -#. Split string because of technical issues with line breaks. -#. Adjust translation with other two parts to give a clear final text. -#: src/clients/sysconfig.rb:70 +#. help text for command 'set' 3/3 +#. Split string because of technical issues with line breaks. +#. Adjust translation with other two parts to give a clear final text. +#: src/clients/sysconfig.rb:70 msgid "or simply DISPLAYMANAGER=gdm" msgstr "또는 단순히 DISPLAYMANAGER=gdm이 필요합니다." -#. help text for command 'set' -#: src/clients/sysconfig.rb:80 +#. help text for command 'set' +#: src/clients/sysconfig.rb:80 msgid "Set empty value (\"\")" msgstr "빈 값(\\)을 설정합니다." -#. help text for command 'details' -#: src/clients/sysconfig.rb:90 +#. help text for command 'details' +#: src/clients/sysconfig.rb:90 msgid "Show details about selected variable" msgstr "선택한 변수에 대한 세부 정보를 표시합니다." -#. help text for option 'all' -#: src/clients/sysconfig.rb:102 +#. help text for option 'all' +#: src/clients/sysconfig.rb:102 msgid "Display all variables" msgstr "모든 변수를 표시합니다." -#. help text for option 'variable' -#: src/clients/sysconfig.rb:107 +#. help text for option 'variable' +#: src/clients/sysconfig.rb:107 msgid "Selected variable" msgstr "선택한 변수입니다." -#: src/clients/sysconfig.rb:108 +#: src/clients/sysconfig.rb:108 msgid "If the variable is available in several files use" msgstr "여러 파일에서 변수를 사용할 수 있는 경우" -#: src/clients/sysconfig.rb:109 +#: src/clients/sysconfig.rb:109 msgid "<variable>$ syntax," msgstr "<variable>$ 구문을 사용하십시오(예:" -#: src/clients/sysconfig.rb:110 +#: src/clients/sysconfig.rb:110 msgid "for example CONFIG_TYPE$/etc/sysconfig/mail." msgstr "CONFIG_TYPE$/etc/sysconfig/mail)." -#. help text for option 'value' -#: src/clients/sysconfig.rb:116 +#. help text for option 'value' +#: src/clients/sysconfig.rb:116 msgid "New value" msgstr "새로운 값" -#. header (command line mode output) -#: src/include/sysconfig/cmdline.rb:43 +#. header (command line mode output) +#: src/include/sysconfig/cmdline.rb:43 msgid "All Variables:\n" msgstr "모든 변수:\n" -#: src/include/sysconfig/cmdline.rb:43 +#: src/include/sysconfig/cmdline.rb:43 msgid "Modified Variables:\n" msgstr "수정된 변수:\n" -#. status message - %1 is a device name (/dev/hdc), %2 is a mode name (udma2), %3 is a result (translated Success/Failed text) -#: src/include/sysconfig/cmdline.rb:77 +#. status message - %1 is a device name (/dev/hdc), %2 is a mode name (udma2), %3 is a result (translated Success/Failed text) +#: src/include/sysconfig/cmdline.rb:77 msgid "" "\n" "Setting variable '%1' to '%2': %3" @@ -100,31 +100,31 @@ "\n" "'%1' 변수를 '%2'(으)로 설정합니다. %3" -#. result message -#: src/include/sysconfig/cmdline.rb:82 +#. result message +#: src/include/sysconfig/cmdline.rb:82 msgid "Success" msgstr "성공" -#: src/include/sysconfig/cmdline.rb:83 +#: src/include/sysconfig/cmdline.rb:83 msgid "Failed" msgstr "실패" -#. display a new value for modified variables -#: src/include/sysconfig/cmdline.rb:164 +#. display a new value for modified variables +#: src/include/sysconfig/cmdline.rb:164 msgid "New Value: " msgstr "새 값: " -#: src/include/sysconfig/cmdline.rb:167 +#: src/include/sysconfig/cmdline.rb:167 msgid "Value: " msgstr "값: " -#. command line output -#: src/include/sysconfig/cmdline.rb:194 +#. command line output +#: src/include/sysconfig/cmdline.rb:194 msgid "Variable %1 was not found." msgstr "%1 변수를 찾을 수 없습니다." -#. variable name conflict - full name (with file name) is required -#: src/include/sysconfig/cmdline.rb:217 +#. variable name conflict - full name (with file name) is required +#: src/include/sysconfig/cmdline.rb:217 msgid "" "\n" "Use a full variable name in the form $\n" @@ -134,128 +134,128 @@ "$ 형식으로 변수 이름을 지정해야 합니다.\n" "예: %1$%2\n" -#. error popup message -#: src/include/sysconfig/complex.rb:65 +#. error popup message +#: src/include/sysconfig/complex.rb:65 msgid "An error occurred while saving and activating the changes." msgstr "변경사항을 활성화하고 저장하는 동안 오류가 발생되었습니다." -#. suffix added to the allowed (predefined) values -#: src/include/sysconfig/complex.rb:127 +#. suffix added to the allowed (predefined) values +#: src/include/sysconfig/complex.rb:127 msgid "or any value" msgstr "또는 임의의 값" -#. Translation: description of possible values, regular expression string is added after the text -#: src/include/sysconfig/complex.rb:135 +#. Translation: description of possible values, regular expression string is added after the text +#: src/include/sysconfig/complex.rb:135 msgid "Value Matching Regular Expression:" msgstr "정규표현식과 매칭되는 값" -#. allowed value description -#: src/include/sysconfig/complex.rb:141 +#. allowed value description +#: src/include/sysconfig/complex.rb:141 msgid "Any integer value" msgstr "아무 정수값" -#. allowed value description -#: src/include/sysconfig/complex.rb:154 +#. allowed value description +#: src/include/sysconfig/complex.rb:154 msgid "Integer value greater or equal to %1" msgstr "%1보다 크거나 같은 정수값" -#. allowed value description -#: src/include/sysconfig/complex.rb:163 +#. allowed value description +#: src/include/sysconfig/complex.rb:163 msgid "Integer value less or equal to %1" msgstr "%1보다 작거나 같은 정수값" -#. Translation: allowed value description, %1 is minimum value, %2 is maximum integer value -#: src/include/sysconfig/complex.rb:172 +#. Translation: allowed value description, %1 is minimum value, %2 is maximum integer value +#: src/include/sysconfig/complex.rb:172 msgid "Any integer value from %1 to %2" msgstr "%1에서 %2까지의 임의의 정수값" -#. allowed value description - any value is allowed -#: src/include/sysconfig/complex.rb:179 +#. allowed value description - any value is allowed +#: src/include/sysconfig/complex.rb:179 msgid "Any value" msgstr "임의의 값" -#. allowed value description - IP adress -#: src/include/sysconfig/complex.rb:183 +#. allowed value description - IP adress +#: src/include/sysconfig/complex.rb:183 msgid "IPv4 or IPv6 address" msgstr "IPv4 또는 IPv6 주소 입력" -#. allowed value description - IPv4 adress -#: src/include/sysconfig/complex.rb:187 +#. allowed value description - IPv4 adress +#: src/include/sysconfig/complex.rb:187 msgid "IPv4 address" msgstr "IPv4 주소" -#. allowed value description - IPv6 adress -#: src/include/sysconfig/complex.rb:191 +#. allowed value description - IPv6 adress +#: src/include/sysconfig/complex.rb:191 msgid "IPv6 address" msgstr "IPv6 주소" -#. rich text item -#: src/include/sysconfig/complex.rb:220 +#. rich text item +#: src/include/sysconfig/complex.rb:220 msgid "File: " msgstr "파일: " -#. rich text item -#: src/include/sysconfig/complex.rb:236 +#. rich text item +#: src/include/sysconfig/complex.rb:236 msgid "Possible Values: " msgstr "가능한 값: " -#. TODO: replace empty value by special text (e.g. "</I>empty</I>") -#. rich text value -#: src/include/sysconfig/complex.rb:255 +#. TODO: replace empty value by special text (e.g. "</I>empty</I>") +#. rich text value +#: src/include/sysconfig/complex.rb:255 msgid "Default Value: " msgstr "기본값: " -#. rich text value -#: src/include/sysconfig/complex.rb:277 +#. rich text value +#: src/include/sysconfig/complex.rb:277 msgid "Original Value: " msgstr "초기값" -#. header in the variable description text, bash command is appended -#: src/include/sysconfig/complex.rb:303 +#. header in the variable description text, bash command is appended +#: src/include/sysconfig/complex.rb:303 msgid "Prepare Command: " msgstr "전처리 명령어: " -#. header in the variable description text -#: src/include/sysconfig/complex.rb:323 +#. header in the variable description text +#: src/include/sysconfig/complex.rb:323 msgid "Configuration Script: " msgstr "스크립트 설정: " -#. header in the variable description text, service names (e.g. "apache") are appended -#: src/include/sysconfig/complex.rb:341 +#. header in the variable description text, service names (e.g. "apache") are appended +#: src/include/sysconfig/complex.rb:341 msgid "Service to Reload: " msgstr "서비스 다시 불러드림: " -#. header in the variable description text, service names (e.g. "apache") are appended -#: src/include/sysconfig/complex.rb:359 +#. header in the variable description text, service names (e.g. "apache") are appended +#: src/include/sysconfig/complex.rb:359 msgid "Service to Restart: " msgstr "서비스 재시작: " -#. header in the variable description text, bash command is appended -#: src/include/sysconfig/complex.rb:376 +#. header in the variable description text, bash command is appended +#: src/include/sysconfig/complex.rb:376 msgid "Activation Command: " msgstr "명령어 활성화: " -#. rich text value -#: src/include/sysconfig/complex.rb:424 +#. rich text value +#: src/include/sysconfig/complex.rb:424 msgid "Description: " msgstr "설명: " -#. modification flag added to variable name (if it was changed) -#: src/include/sysconfig/complex.rb:592 +#. modification flag added to variable name (if it was changed) +#: src/include/sysconfig/complex.rb:592 msgid "(changed)" msgstr "(변경됨)" -#. combo box widget label - variable name is appended to the string -#. combo box widget label - variable name is appended to the string -#. combo box label -#: src/include/sysconfig/complex.rb:602 src/include/sysconfig/complex.rb:613 -#: src/include/sysconfig/complex.rb:850 +#. combo box widget label - variable name is appended to the string +#. combo box widget label - variable name is appended to the string +#. combo box label +#: src/include/sysconfig/complex.rb:602 src/include/sysconfig/complex.rb:613 +#: src/include/sysconfig/complex.rb:850 msgid "S&etting of: " msgstr "설정(&E):" -#. current value has more than one line - it is displayed incorrectly -#. because combobox widget has single line entry (lines are merged) -#: src/include/sysconfig/complex.rb:640 +#. current value has more than one line - it is displayed incorrectly +#. because combobox widget has single line entry (lines are merged) +#: src/include/sysconfig/complex.rb:640 msgid "" "The currently selected value has more than one line.\n" "Joined lines are displayed in the combo box.\n" @@ -263,14 +263,14 @@ "현재 선택한 값이 두 줄 이상입니다.\n" "두 줄 이상은 콤보 상자에 표시됩니다.\n" -#. header label -#. label widget -#: src/include/sysconfig/complex.rb:671 src/include/sysconfig/complex.rb:837 +#. header label +#. label widget +#: src/include/sysconfig/complex.rb:671 src/include/sysconfig/complex.rb:837 msgid "Current Selection: " msgstr "현재의 선택: " -#. popup question dialog: variable value does not match defined type - ask user to set value (%1 is value entered by user, %2 is allowed type - e.g. integer -#: src/include/sysconfig/complex.rb:713 +#. popup question dialog: variable value does not match defined type - ask user to set value (%1 is value entered by user, %2 is allowed type - e.g. integer +#: src/include/sysconfig/complex.rb:713 msgid "" "Value '%1'\n" "does not match type '%2'.\n" @@ -282,210 +282,188 @@ "\n" "정말 이 값으로 설정하시겠습니까?\n" -#. when a comment is too long to display it in the table -#. it is shortened and mark (three dot characters) is added to the end -#: src/include/sysconfig/complex.rb:764 +#. when a comment is too long to display it in the table +#. it is shortened and mark (three dot characters) is added to the end +#: src/include/sysconfig/complex.rb:764 msgid "..." msgstr "..." -#. Translation: push button label -#. push button label -#: src/include/sysconfig/complex.rb:804 src/include/sysconfig/complex.rb:889 +#. Translation: push button label +#. push button label +#: src/include/sysconfig/complex.rb:804 src/include/sysconfig/complex.rb:889 msgid "&Search" msgstr "검색(&S)" -#. tree widget label -#. term help_space_content = `Tree(`id(`tree), `opt(`notify, `vstretch), _("&Configuration Options"), Sysconfig::tree_content); -#. Wizard::OpenCustomDialog(help_space_content, button_box); -#: src/include/sysconfig/complex.rb:815 +#. tree widget label +#. term help_space_content = `Tree(`id(`tree), `opt(`notify, `vstretch), _("&Configuration Options"), Sysconfig::tree_content); +#. Wizard::OpenCustomDialog(help_space_content, button_box); +#: src/include/sysconfig/complex.rb:815 msgid "&Configuration Options" msgstr "설정 옵션(&C)" -#. helptext for popup - part 1/2 -#: src/include/sysconfig/complex.rb:819 +#. helptext for popup - part 1/2 +#: src/include/sysconfig/complex.rb:819 msgid "" "<p>After you save your changes, this editor changes the variables in the\n" -"corresponding sysconfig file. Then it starts activation commands, which " -"changes the underlying configuration files, stops and starts daemons,\n" -"and runs low-level configuration tools so your configuration in sysconfig " -"takes effect.</p>\n" +"corresponding sysconfig file. Then it starts activation commands, which changes the underlying configuration files, stops and starts daemons,\n" +"and runs low-level configuration tools so your configuration in sysconfig takes effect.</p>\n" msgstr "" "<p>변경 내용을 저장하면 이 편집기는 sysconfig 파일에서\n" -"변수를 변경한 다음 활성화 명령을 시작합니다. 활성화 명령은 기본 구성 파일을 " -"변경하고, 데몬을 중지/시작하고,\n" +"변수를 변경한 다음 활성화 명령을 시작합니다. 활성화 명령은 기본 구성 파일을 변경하고, 데몬을 중지/시작하고,\n" "낮은 수준의 구성 도구를 실행하여 sysconfig 파일의 구성을 적용합니다.</p>\n" -#. helptext for popup - part 2/2 -#: src/include/sysconfig/complex.rb:825 -msgid "" -"<p><b>Important:</b> You still can edit each individual configuration file " -"manually. The name of file is displayed in the variable description.</p>" -msgstr "" -"<p><b>중요:</b> 각 구성 파일을 개별적으로 편집할 수도 있습니다. 파일 이름은 " -"변수 설명에 표시됩니다.</p>" +#. helptext for popup - part 2/2 +#: src/include/sysconfig/complex.rb:825 +msgid "<p><b>Important:</b> You still can edit each individual configuration file manually. The name of file is displayed in the variable description.</p>" +msgstr "<p><b>중요:</b> 각 구성 파일을 개별적으로 편집할 수도 있습니다. 파일 이름은 변수 설명에 표시됩니다.</p>" -#: src/include/sysconfig/complex.rb:830 +#: src/include/sysconfig/complex.rb:830 msgid "/etc/sysconfig Editor" msgstr "/etc/sysconfig 편집기" -#. push button label -#: src/include/sysconfig/complex.rb:859 +#. push button label +#: src/include/sysconfig/complex.rb:859 msgid "&Default" msgstr "기본(&D)" -#. help rich text displayed after module start (1/2) -#: src/include/sysconfig/complex.rb:866 -msgid "" -"<P><B>System Configuration Editor</B></P><P>With the system configuration " -"editor, you can change some system settings. You can also use YaST to " -"configure your hardware and system settings.</P>" -msgstr "" -"<P><B>시스템 구성 편집기</B></P><P>시스템 구성 편집기를 사용하여 일부 시스템 " -"설정을 변경할 수 있습니다. YaST를 사용하여 하드웨어 및 시스템 설정을 구성할 " -"수도 있습니다.</P>" +#. help rich text displayed after module start (1/2) +#: src/include/sysconfig/complex.rb:866 +msgid "<P><B>System Configuration Editor</B></P><P>With the system configuration editor, you can change some system settings. You can also use YaST to configure your hardware and system settings.</P>" +msgstr "<P><B>시스템 구성 편집기</B></P><P>시스템 구성 편집기를 사용하여 일부 시스템 설정을 변경할 수 있습니다. YaST를 사용하여 하드웨어 및 시스템 설정을 구성할 수도 있습니다.</P>" -#. help rich text displayed after module start (2/2) -#: src/include/sysconfig/complex.rb:870 -msgid "" -"<P><B>Note:</B> Descriptions are not translated because they are read " -"directly from configuration files.</P>" -msgstr "" -"<P><B>주의:</B> 설명은 구성 파일에서 직접 읽는 것이므로 번역되지 않습니다." +#. help rich text displayed after module start (2/2) +#: src/include/sysconfig/complex.rb:870 +msgid "<P><B>Note:</B> Descriptions are not translated because they are read directly from configuration files.</P>" +msgstr "<P><B>주의:</B> 설명은 구성 파일에서 직접 읽는 것이므로 번역되지 않습니다.</P>" -#. push button label - displayed only in autoinstallation config mode -#: src/include/sysconfig/complex.rb:877 +#. push button label - displayed only in autoinstallation config mode +#: src/include/sysconfig/complex.rb:877 msgid "&Use Current Value" msgstr "현재 값을 사용(&U)" -#. push button label - displayed only in autoinstallation config mode -#: src/include/sysconfig/complex.rb:879 +#. push button label - displayed only in autoinstallation config mode +#: src/include/sysconfig/complex.rb:879 msgid "&Add New Variable..." msgstr "새로운 변수 추가...(&A)" -#. popup dialog header - confirm to save the changes -#: src/include/sysconfig/complex.rb:921 +#. popup dialog header - confirm to save the changes +#: src/include/sysconfig/complex.rb:921 msgid "Save Modified Variables" msgstr "수정된 변수 저장" -#. checkbox label -#: src/include/sysconfig/complex.rb:927 +#. checkbox label +#: src/include/sysconfig/complex.rb:927 msgid "Confirm Each Activation Command" msgstr "각각의 명령어 활성화를 확인합니다" -#. // popup dialog header -#: src/include/sysconfig/complex.rb:949 +#. // popup dialog header +#: src/include/sysconfig/complex.rb:949 msgid "Search Result" msgstr "검색 결과" -#. help text in popup dialog -#: src/include/sysconfig/complex.rb:951 -msgid "" -"The search results are displayed here. If you see the item you want, select " -"it then click \"Go to\". Otherwise, click \"Cancel\" to close this dialog." -msgstr "" -"검색한 결과는 여기에 표시됩니다. 만약 당신이 원하는 항목을 보았다면, 그 항목" -"을 선택한 다음 \"Go to\"를 누르십시오. 만약 그렇지 않다면, \"취소\"를 누르십" -"시오." +#. help text in popup dialog +#: src/include/sysconfig/complex.rb:951 +msgid "The search results are displayed here. If you see the item you want, select it then click \"Go to\". Otherwise, click \"Cancel\" to close this dialog." +msgstr "검색한 결과는 여기에 표시됩니다. 만약 당신이 원하는 항목을 보았다면, 그 항목을 선택한 다음 \"Go to\"를 누르십시오. 만약 그렇지 않다면, \"취소\"를 누르십시오." -#. push button label -#: src/include/sysconfig/complex.rb:956 +#. push button label +#: src/include/sysconfig/complex.rb:956 msgid "&Go to" msgstr "실행(&G)" -#. popup message - search result message -#: src/include/sysconfig/complex.rb:981 +#. popup message - search result message +#: src/include/sysconfig/complex.rb:981 msgid "No entries found" msgstr "목록을 찾을 수 없습니다" -#. popup window header -#: src/include/sysconfig/complex.rb:992 +#. popup window header +#: src/include/sysconfig/complex.rb:992 msgid "Help" msgstr "도움" -#. search popup window header -#: src/include/sysconfig/dialogs.rb:33 +#. search popup window header +#: src/include/sysconfig/dialogs.rb:33 msgid "Search for a Configuration Variable" msgstr "설정 변수 검색" -#. text entry label -#: src/include/sysconfig/dialogs.rb:41 +#. text entry label +#: src/include/sysconfig/dialogs.rb:41 msgid "&Search for:" msgstr "검색(&S)" -#. check box label -#: src/include/sysconfig/dialogs.rb:44 +#. check box label +#: src/include/sysconfig/dialogs.rb:44 msgid "&Case Sensitive Search" msgstr "대소문자 구분 검색(&C)" -#. check box label -#: src/include/sysconfig/dialogs.rb:46 +#. check box label +#: src/include/sysconfig/dialogs.rb:46 msgid "Search &Variable Name" msgstr "변수 이름 검색(&S)" -#. check box label -#: src/include/sysconfig/dialogs.rb:48 +#. check box label +#: src/include/sysconfig/dialogs.rb:48 msgid "Search &description" msgstr "설명 검색(&D)" -#. check box label -#: src/include/sysconfig/dialogs.rb:50 +#. check box label +#: src/include/sysconfig/dialogs.rb:50 msgid "Search &value" msgstr "값 검색(&V)" -#. table column header -#: src/include/sysconfig/dialogs.rb:132 +#. table column header +#: src/include/sysconfig/dialogs.rb:132 msgid "Name" msgstr "이름" -#: src/include/sysconfig/dialogs.rb:133 +#: src/include/sysconfig/dialogs.rb:133 msgid "NEW VALUE" msgstr "새로운 값" -#: src/include/sysconfig/dialogs.rb:134 +#: src/include/sysconfig/dialogs.rb:134 msgid "Old Value" msgstr "이전 값" -#: src/include/sysconfig/dialogs.rb:135 +#: src/include/sysconfig/dialogs.rb:135 msgid "File" msgstr "파일" -#: src/include/sysconfig/dialogs.rb:136 +#: src/include/sysconfig/dialogs.rb:136 msgid "Description" msgstr "설명" -#. text entry label -#: src/include/sysconfig/dialogs.rb:179 +#. text entry label +#: src/include/sysconfig/dialogs.rb:179 msgid "&Variable Name" msgstr "변수 이름(&V)" -#. text entry label -#: src/include/sysconfig/dialogs.rb:181 +#. text entry label +#: src/include/sysconfig/dialogs.rb:181 msgid "V&alue" msgstr "값(&A)" -#. text entry label -#: src/include/sysconfig/dialogs.rb:186 +#. text entry label +#: src/include/sysconfig/dialogs.rb:186 msgid "&File Name" msgstr "파일 이름(&F)" -#. warning popup message - variable name is empty -#: src/include/sysconfig/dialogs.rb:210 +#. warning popup message - variable name is empty +#: src/include/sysconfig/dialogs.rb:210 msgid "Missing variable name value." msgstr "변수 이름 값이 없습니다." -#. warning popup message - file name is empty -#: src/include/sysconfig/dialogs.rb:214 +#. warning popup message - file name is empty +#: src/include/sysconfig/dialogs.rb:214 msgid "Missing file name value." msgstr "파일 이름 값이 없습니다." -#. warning popup message - file name is required with absolute path -#: src/include/sysconfig/dialogs.rb:218 +#. warning popup message - file name is required with absolute path +#: src/include/sysconfig/dialogs.rb:218 msgid "Missing absolute path in file name." msgstr "파일 이름에 절대 경로가 빠졌습니다." -#. Read dialog help -#: src/include/sysconfig/helps.rb:17 +#. Read dialog help +#: src/include/sysconfig/helps.rb:17 msgid "" "<p><b><big>Initializing sysconfig Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -493,8 +471,8 @@ "<p><b><big>sysconfig 설정을 초기화하는 중입니다</big></b>\n" "<br>기다려주십시오...<br></p>\n" -#. Write dialog help -#: src/include/sysconfig/helps.rb:21 +#. Write dialog help +#: src/include/sysconfig/helps.rb:21 msgid "" "<p><b><big>Saving sysconfig Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -503,109 +481,108 @@ "<p><b><big>sysconfig 설정을 저장하는 중입니다</big></b>\n" "<br>기다려주십시오...<br></p>\n" -#. Translation: Progress bar label -#: src/modules/Sysconfig.rb:162 +#. Translation: Progress bar label +#: src/modules/Sysconfig.rb:162 msgid "Searching..." msgstr "검색 중..." -#. button label -#: src/modules/Sysconfig.rb:881 +#. button label +#: src/modules/Sysconfig.rb:881 msgid "S&kip" msgstr "생략(&K)" -#. write dialog caption -#: src/modules/Sysconfig.rb:909 +#. write dialog caption +#: src/modules/Sysconfig.rb:909 msgid "Saving sysconfig Configuration" msgstr "sysconfig 설정 저장" -#. progress bar item -#: src/modules/Sysconfig.rb:923 +#. progress bar item +#: src/modules/Sysconfig.rb:923 msgid "Write the new settings" msgstr "새로운 설정 기록" -#: src/modules/Sysconfig.rb:924 +#: src/modules/Sysconfig.rb:924 msgid "Activate the changes" msgstr "변경사항 활성화" -#: src/modules/Sysconfig.rb:934 +#: src/modules/Sysconfig.rb:934 msgid "Saving changes to the files..." msgstr "변경사항을 파일에 저장하는 중..." -#. start generic commands -#: src/modules/Sysconfig.rb:965 +#. start generic commands +#: src/modules/Sysconfig.rb:965 msgid "Finished" msgstr "완료됨" -#. configuration summary headline -#: src/modules/Sysconfig.rb:1048 +#. configuration summary headline +#: src/modules/Sysconfig.rb:1048 msgid "Configuration Summary" msgstr "설정 요약" -#. Executes a bash command using #exec_action -#. @see #exec_action -#. @param cmd [String] command to execute -#. @return [Symbol] result returned by #exec_action -#: src/modules/Sysconfig.rb:1132 +#. Executes a bash command using #exec_action +#. @see #exec_action +#. @param cmd [String] command to execute +#. @return [Symbol] result returned by #exec_action +#: src/modules/Sysconfig.rb:1132 msgid "Starting command: %1..." msgstr "명령어 시작 중입니다: %1..." -#: src/modules/Sysconfig.rb:1133 +#: src/modules/Sysconfig.rb:1133 msgid "Command %1 failed" msgstr "'%1 명령어 실패" -#: src/modules/Sysconfig.rb:1134 +#: src/modules/Sysconfig.rb:1134 msgid "A command will be executed" msgstr "명령어가 실행될 것입니다" -#: src/modules/Sysconfig.rb:1134 +#: src/modules/Sysconfig.rb:1134 msgid "Command: " msgstr "명령어: " -#. Restarts or reloads a service using #exec_action -#. @see #exec_action -#. @param name [String] service name -#. @param action [Symbol] :reload or :restart -#. @return [Symbol] result returned by #exec_action -#: src/modules/Sysconfig.rb:1156 +#. Restarts or reloads a service using #exec_action +#. @see #exec_action +#. @param name [String] service name +#. @param action [Symbol] :reload or :restart +#. @return [Symbol] result returned by #exec_action +#: src/modules/Sysconfig.rb:1156 msgid "Reloading service %s..." msgstr "서비스 %s 다시 로드 중..." -#: src/modules/Sysconfig.rb:1157 +#: src/modules/Sysconfig.rb:1157 msgid "Reload of the service %s failed" msgstr "서비스 %s 다시 로드 실패" -#: src/modules/Sysconfig.rb:1158 +#: src/modules/Sysconfig.rb:1158 msgid "Service %s will be reloaded" msgstr "서비스 %s이(가) 다시 로드됩니다." -#: src/modules/Sysconfig.rb:1160 +#: src/modules/Sysconfig.rb:1160 msgid "Restarting service %s..." msgstr "서비스 %s 재시작 중..." -#: src/modules/Sysconfig.rb:1161 +#: src/modules/Sysconfig.rb:1161 msgid "Restart of the service %s failed" msgstr "서비스 %s 재시작 실패" -#: src/modules/Sysconfig.rb:1162 +#: src/modules/Sysconfig.rb:1162 msgid "Service %s will be restarted" msgstr "서비스 %s이(가) 재시작됩니다." -#. Returns whether given service is active (info from systemd) -#. If service is not found, reports error in UI and returns nil -#. -#. @param service name -#. @return [Boolean] active? -#: src/modules/Sysconfig.rb:1187 +#. Returns whether given service is active (info from systemd) +#. If service is not found, reports error in UI and returns nil +#. +#. @param service name +#. @return [Boolean] active? +#: src/modules/Sysconfig.rb:1187 msgid "Cannot determine service state, systemd service does not exist:" -msgstr "" -"서비스 상태를 결정할 수 없습니다. 다음 시스템 서비스가 존재하지 않습니다." +msgstr "서비스 상태를 결정할 수 없습니다. 다음 시스템 서비스가 존재하지 않습니다." -#. progress bar label, %1 is variable name (e.g. DISPLAYMANAGER) -#: src/modules/Sysconfig.rb:1266 +#. progress bar label, %1 is variable name (e.g. DISPLAYMANAGER) +#: src/modules/Sysconfig.rb:1266 msgid "Saving variable %1..." msgstr "%1 변수를 저장하는 중..." -#. error popup: %1 - variable name (e.g. DISPLAYMANAGER), %2 - file name (/etc/sysconfig/displaymanager) -#: src/modules/Sysconfig.rb:1273 +#. error popup: %1 - variable name (e.g. DISPLAYMANAGER), %2 - file name (/etc/sysconfig/displaymanager) +#: src/modules/Sysconfig.rb:1273 msgid "Saving variable %1 to the file %2 failed." msgstr "%2 파일에 %1 변수를 저장하는 중에 실패되었습니다." Modified: branches/SLE12-SP3/yast/ko/po/tftp-server.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/tftp-server.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/tftp-server.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,129 +14,123 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. description map for command line -#: src/clients/tftp-server.rb:35 +#. description map for command line +#: src/clients/tftp-server.rb:35 msgid "Configure a TFTP server" msgstr "TFTP 서버 구성" -#. command line: help text for "status" command -#: src/clients/tftp-server.rb:39 +#. command line: help text for "status" command +#: src/clients/tftp-server.rb:39 msgid "Status of the TFTP server" msgstr "TFTP 서버 상태" -#. command line: help text for "directory" command -#: src/clients/tftp-server.rb:49 +#. command line: help text for "directory" command +#: src/clients/tftp-server.rb:49 msgid "Directory of the TFTP server" msgstr "TFTP 서버 디렉토리" -#. command line: help text for "enable" command -#: src/clients/tftp-server.rb:61 +#. command line: help text for "enable" command +#: src/clients/tftp-server.rb:61 msgid "Enable the TFTP service" msgstr "TFTP 서비스 활성화" -#. command line: help text for "disable" command -#: src/clients/tftp-server.rb:67 +#. command line: help text for "disable" command +#: src/clients/tftp-server.rb:67 msgid "Disable the TFTP service" msgstr "TFTP 서비스 비활성화" -#. command line: help text for "show" command -#: src/clients/tftp-server.rb:73 +#. command line: help text for "show" command +#: src/clients/tftp-server.rb:73 msgid "Show the status of the TFTP service" msgstr "TFTP 서비스 상태 표시" -#. command line: help text for "path" command -#: src/clients/tftp-server.rb:80 +#. command line: help text for "path" command +#: src/clients/tftp-server.rb:80 msgid "Set the directory for the TFTP server" msgstr "TFTP 서버에 대한 디렉토리 설정" -#. command line: help text for "list" command -#: src/clients/tftp-server.rb:86 +#. command line: help text for "list" command +#: src/clients/tftp-server.rb:86 msgid "Show the directory for the TFTP server" msgstr "TFTP 서버에 대한 디렉토리 표시" -#. command line: show status of tftp-server -#: src/clients/tftp-server.rb:120 +#. command line: show status of tftp-server +#: src/clients/tftp-server.rb:120 msgid "Service Status: %1" msgstr "서비스 상태: %1" -#. command line: show directory server by tftp-server -#: src/clients/tftp-server.rb:140 +#. command line: show directory server by tftp-server +#: src/clients/tftp-server.rb:140 msgid "Directory Path: %1" msgstr "디렉토리 경로: %1" -#. Tftp-server dialog caption -#. Tftp-server dialog caption -#. Tftp-server dialog caption -#: src/include/tftp-server/dialogs.rb:67 -#: src/include/tftp-server/wizards.rb:43 -#: src/include/tftp-server/wizards.rb:78 +#. Tftp-server dialog caption +#. Tftp-server dialog caption +#. Tftp-server dialog caption +#: src/include/tftp-server/dialogs.rb:67 src/include/tftp-server/wizards.rb:43 +#: src/include/tftp-server/wizards.rb:78 msgid "TFTP Server Configuration" msgstr "TFTP 서버 설정" -#. dialog help text -#: src/include/tftp-server/dialogs.rb:79 +#. dialog help text +#: src/include/tftp-server/dialogs.rb:79 msgid "<p><big><b>Configuring a TFTP Server</b></big></p>" msgstr "<p><big><b>TFTP 서버 구성</b></big></p>" -#. dialog help text -#: src/include/tftp-server/dialogs.rb:83 -msgid "" -"<p>Use this to enable a server for TFTP (trivial file transfer protocol). " -"The server will be started using xinetd.</p>" -msgstr "" -"<p>이것을 사용하여 TFTP(Trivial File Transfer Protocol)에 대한 서버를 활성화" -"할 수 있습니다. 서버는 xinetd를 사용하여 시작됩니다.</p>" +#. dialog help text +#: src/include/tftp-server/dialogs.rb:83 +msgid "<p>Use this to enable a server for TFTP (trivial file transfer protocol). The server will be started using xinetd.</p>" +msgstr "<p>이것을 사용하여 TFTP(Trivial File Transfer Protocol)에 대한 서버를 활성화할 수 있습니다. 서버는 xinetd를 사용하여 시작됩니다.</p>" -#. enlighten newbies, #102946 -#. dialog help text -#: src/include/tftp-server/dialogs.rb:91 +#. enlighten newbies, #102946 +#. dialog help text +#: src/include/tftp-server/dialogs.rb:91 msgid "<p>Note that TFTP and FTP are not the same.</p>" msgstr "<p>TFTP와 FTP는 다르다는 점에 유의하십시오.</p>" -#. dialog help text -#: src/include/tftp-server/dialogs.rb:96 +#. dialog help text +#: src/include/tftp-server/dialogs.rb:96 msgid "" "<p><b>Boot Image Directory</b>:\n" "Specify the directory where served files are located. The usual value is\n" "<tt>/tftpboot</tt>. The directory will be created if it does not exist. \n" -"The server uses this as its root directory (using the <tt>-s</tt> option).\n" +"The server uses this as its root directory (using the <tt>-s</tt> option).</p>\n" msgstr "" "<p><b>부트 이미지 디렉토리</b>:\n" "제공된 파일이 있는 디렉토리를 지정합니다. 일반적인 값은\n" "<tt>/tftpboot</tt>입니다. 디렉토리가 없는 경우 생성됩니다. \n" "서버는 이 디렉토리를 루트 디렉토리로 사용합니다(<tt>-s</tt> 옵션 사용).</p>\n" -#. Radio button label, disable TFTP server -#: src/include/tftp-server/dialogs.rb:115 +#. Radio button label, disable TFTP server +#: src/include/tftp-server/dialogs.rb:115 msgid "&Disable" msgstr "비활성화(&D)" -#. Radio button label, disable TFTP server -#: src/include/tftp-server/dialogs.rb:124 +#. Radio button label, disable TFTP server +#: src/include/tftp-server/dialogs.rb:124 msgid "&Enable" msgstr "활성화(&E)" -#. Text entry label -#. Directory where served files (usually boot images) reside -#: src/include/tftp-server/dialogs.rb:134 +#. Text entry label +#. Directory where served files (usually boot images) reside +#: src/include/tftp-server/dialogs.rb:134 msgid "&Boot Image Directory" msgstr "부트 이미지 디렉토리(&B)" -#. push button label -#. select a directory from the filesystem -#: src/include/tftp-server/dialogs.rb:137 +#. push button label +#. select a directory from the filesystem +#: src/include/tftp-server/dialogs.rb:137 msgid "Bro&wse..." msgstr "찾아보기(&W)..." -#. push button label -#. display a log file -#: src/include/tftp-server/dialogs.rb:144 +#. push button label +#. display a log file +#: src/include/tftp-server/dialogs.rb:144 msgid "&View Log" msgstr "로그 보기(&V)" -#. error popup -#: src/include/tftp-server/dialogs.rb:207 +#. error popup +#: src/include/tftp-server/dialogs.rb:207 msgid "" "The directory must start with a slash (/)\n" "and must not contain spaces." @@ -144,19 +138,19 @@ "디렉토리는 반드시 슬래쉬(/)로 시작해야 하고\n" "빈공백을 포함하면 안됩니다." -#. progress label -#: src/include/tftp-server/wizards.rb:46 +#. progress label +#: src/include/tftp-server/wizards.rb:46 msgid "Initializing..." msgstr "초기화 중..." -#. progress label -#: src/include/tftp-server/wizards.rb:81 +#. progress label +#: src/include/tftp-server/wizards.rb:81 msgid "Initializing ..." msgstr "초기화 중입니다....." -#. error popup -#. %1 is a command name (or a comma (, ) separated list of them) -#: src/modules/TftpServer.rb:145 +#. error popup +#. %1 is a command name (or a comma (, ) separated list of them) +#: src/modules/TftpServer.rb:145 msgid "" "This module can only use xinetd to set up TFTP.\n" "However, another program is serving TFTP: %1.\n" @@ -166,24 +160,24 @@ "그러나, 또다른 프로그램도 TFTP를 지원하고 있습니다: %1.\n" "종료합니다.\n" -#. xinetd may be needed for other services so we never turn it -#. off. It will exit anyway if no services are configured. -#. If it is running, restart it. -#: src/modules/TftpServer.rb:240 +#. xinetd may be needed for other services so we never turn it +#. off. It will exit anyway if no services are configured. +#. If it is running, restart it. +#: src/modules/TftpServer.rb:240 msgid "Cannot reload service %{name}" msgstr "%{name} 서비스를 다시 로드할 수 없습니다." -#. summary header -#: src/modules/TftpServer.rb:303 +#. summary header +#: src/modules/TftpServer.rb:303 msgid "TFTP Server Enabled:" msgstr "TFTP 서버 활성화:" -#. summary item: an option is turned on -#: src/modules/TftpServer.rb:305 +#. summary item: an option is turned on +#: src/modules/TftpServer.rb:305 msgid "Yes" msgstr "확인" -#. summary header -#: src/modules/TftpServer.rb:308 +#. summary header +#: src/modules/TftpServer.rb:308 msgid "Boot Image Directory:" msgstr "부트 이미지 디렉토리:" Modified: branches/SLE12-SP3/yast/ko/po/timezone_db.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/timezone_db.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/timezone_db.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,2458 +14,2458 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. name of time zone region -#: timezone/src/data/timezone_raw.ycp:23 +#. name of time zone region +#: timezone/src/data/timezone_raw.ycp:23 msgid "Europe" msgstr "유럽" -#: timezone/src/data/timezone_raw.ycp:25 +#: timezone/src/data/timezone_raw.ycp:25 msgid "Netherlands" msgstr "네덜란드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:27 +#. time zone +#: timezone/src/data/timezone_raw.ycp:27 msgid "Andorra" msgstr "안도라" -#: timezone/src/data/timezone_raw.ycp:28 +#: timezone/src/data/timezone_raw.ycp:28 msgid "Greece" msgstr "그리스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:30 +#. time zone +#: timezone/src/data/timezone_raw.ycp:30 msgid "Serbia" msgstr "세르비아" -#: timezone/src/data/timezone_raw.ycp:31 +#: timezone/src/data/timezone_raw.ycp:31 msgid "Germany" msgstr "독일" -#: timezone/src/data/timezone_raw.ycp:32 +#: timezone/src/data/timezone_raw.ycp:32 msgid "Slovakia" msgstr "슬로바키아" -#: timezone/src/data/timezone_raw.ycp:33 +#: timezone/src/data/timezone_raw.ycp:33 msgid "Belgium" msgstr "벨기에" -#: timezone/src/data/timezone_raw.ycp:34 +#: timezone/src/data/timezone_raw.ycp:34 msgid "Romania" msgstr "루마니아" -#: timezone/src/data/timezone_raw.ycp:35 +#: timezone/src/data/timezone_raw.ycp:35 msgid "Hungary" msgstr "헝가리" -#: timezone/src/data/timezone_raw.ycp:36 +#: timezone/src/data/timezone_raw.ycp:36 msgid "Moldova" msgstr "몰도바" -#: timezone/src/data/timezone_raw.ycp:37 +#: timezone/src/data/timezone_raw.ycp:37 msgid "Denmark" msgstr "덴마크" -#: timezone/src/data/timezone_raw.ycp:38 +#: timezone/src/data/timezone_raw.ycp:38 msgid "Ireland" msgstr "아일랜드" -#: timezone/src/data/timezone_raw.ycp:39 +#: timezone/src/data/timezone_raw.ycp:39 msgid "Gibraltar" msgstr "지브랄터" -#. time zone -#: timezone/src/data/timezone_raw.ycp:41 +#. time zone +#: timezone/src/data/timezone_raw.ycp:41 msgid "Guernsey" msgstr "건지" -#: timezone/src/data/timezone_raw.ycp:42 +#: timezone/src/data/timezone_raw.ycp:42 msgid "Finland" msgstr "핀란드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:44 +#. time zone +#: timezone/src/data/timezone_raw.ycp:44 msgid "Isle of Man" msgstr "맨섬" -#: timezone/src/data/timezone_raw.ycp:45 +#: timezone/src/data/timezone_raw.ycp:45 msgid "Turkey" msgstr "터어키" -#: timezone/src/data/timezone_raw.ycp:46 +#: timezone/src/data/timezone_raw.ycp:46 msgid "Jersey" msgstr "저지" -#. time zone -#: timezone/src/data/timezone_raw.ycp:48 +#. time zone +#: timezone/src/data/timezone_raw.ycp:48 msgid "Russia (Kaliningrad)" msgstr "러시아(칼리닌그라드)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:50 +#. time zone +#: timezone/src/data/timezone_raw.ycp:50 msgid "Ukraine (Kiev)" msgstr "우크라이나(키예프)" -#: timezone/src/data/timezone_raw.ycp:51 +#: timezone/src/data/timezone_raw.ycp:51 msgid "Portugal" msgstr "포르투갈" -#: timezone/src/data/timezone_raw.ycp:52 +#: timezone/src/data/timezone_raw.ycp:52 msgid "Slovenia" msgstr "슬로베니아" -#: timezone/src/data/timezone_raw.ycp:53 +#: timezone/src/data/timezone_raw.ycp:53 msgid "United Kingdom" msgstr "영국" -#: timezone/src/data/timezone_raw.ycp:54 +#: timezone/src/data/timezone_raw.ycp:54 msgid "Luxembourg" msgstr "룩셈부르크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:56 +#. time zone +#: timezone/src/data/timezone_raw.ycp:56 msgid "Aaland Islands" msgstr "아아랜드 제도" -#: timezone/src/data/timezone_raw.ycp:57 +#: timezone/src/data/timezone_raw.ycp:57 msgid "Spain" msgstr "스페인" -#: timezone/src/data/timezone_raw.ycp:58 +#: timezone/src/data/timezone_raw.ycp:58 msgid "Malta" msgstr "말타" -#. time zone -#: timezone/src/data/timezone_raw.ycp:60 +#. time zone +#: timezone/src/data/timezone_raw.ycp:60 msgid "Belarus" msgstr "벨라루스" -#: timezone/src/data/timezone_raw.ycp:61 +#: timezone/src/data/timezone_raw.ycp:61 msgid "Monaco" msgstr "모나코" -#. time zone -#: timezone/src/data/timezone_raw.ycp:63 +#. time zone +#: timezone/src/data/timezone_raw.ycp:63 msgid "Russia (Moscow)" msgstr "러시아(모스크바)" -#: timezone/src/data/timezone_raw.ycp:64 +#: timezone/src/data/timezone_raw.ycp:64 msgid "Norway" msgstr "노르웨이" -#: timezone/src/data/timezone_raw.ycp:65 +#: timezone/src/data/timezone_raw.ycp:65 msgid "France" msgstr "프랑스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:67 +#. time zone +#: timezone/src/data/timezone_raw.ycp:67 msgid "Montenegro" msgstr "몬테네그로" -#: timezone/src/data/timezone_raw.ycp:68 +#: timezone/src/data/timezone_raw.ycp:68 msgid "Czech Republic" msgstr "체코 공화국" -#: timezone/src/data/timezone_raw.ycp:69 +#: timezone/src/data/timezone_raw.ycp:69 msgid "Latvia" msgstr "라트비아" -#: timezone/src/data/timezone_raw.ycp:70 +#: timezone/src/data/timezone_raw.ycp:70 msgid "Italy" msgstr "이태리" -#. time zone -#: timezone/src/data/timezone_raw.ycp:72 +#. time zone +#: timezone/src/data/timezone_raw.ycp:72 msgid "San Marino" msgstr "산마리노" -#. time zone -#: timezone/src/data/timezone_raw.ycp:74 +#. time zone +#: timezone/src/data/timezone_raw.ycp:74 msgid "Russia (Samara)" msgstr "러시아(사마라)" -#: timezone/src/data/timezone_raw.ycp:75 +#: timezone/src/data/timezone_raw.ycp:75 msgid "Bosnia & Herzegovina" msgstr "보스니아 헤르체고비나" -#. time zone -#: timezone/src/data/timezone_raw.ycp:77 +#. time zone +#: timezone/src/data/timezone_raw.ycp:77 msgid "Ukraine (Simferopol)" msgstr "우크라이나(심페로폴)" -#: timezone/src/data/timezone_raw.ycp:78 +#: timezone/src/data/timezone_raw.ycp:78 msgid "Macedonia" msgstr "마케도니아" -#: timezone/src/data/timezone_raw.ycp:79 +#: timezone/src/data/timezone_raw.ycp:79 msgid "Bulgaria" msgstr "불가리아" -#: timezone/src/data/timezone_raw.ycp:80 +#: timezone/src/data/timezone_raw.ycp:80 msgid "Sweden" msgstr "스웨덴" -#: timezone/src/data/timezone_raw.ycp:81 +#: timezone/src/data/timezone_raw.ycp:81 msgid "Estonia" msgstr "에스토니아" -#: timezone/src/data/timezone_raw.ycp:82 +#: timezone/src/data/timezone_raw.ycp:82 msgid "Albania" msgstr "알바니아" -#: timezone/src/data/timezone_raw.ycp:83 +#: timezone/src/data/timezone_raw.ycp:83 msgid "Uzhgorod" msgstr "우주고로드" -#: timezone/src/data/timezone_raw.ycp:84 +#: timezone/src/data/timezone_raw.ycp:84 msgid "Liechtenstein" msgstr "리히텐스타인" -#: timezone/src/data/timezone_raw.ycp:85 +#: timezone/src/data/timezone_raw.ycp:85 msgid "Vatican" msgstr "바티칸" -#: timezone/src/data/timezone_raw.ycp:86 +#: timezone/src/data/timezone_raw.ycp:86 msgid "Austria" msgstr "오스트리아" -#: timezone/src/data/timezone_raw.ycp:87 +#: timezone/src/data/timezone_raw.ycp:87 msgid "Lithuania" msgstr "리투아니아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:89 +#. time zone +#: timezone/src/data/timezone_raw.ycp:89 msgid "Russia (Volgograd)" msgstr "러시아(볼고그라드)" -#: timezone/src/data/timezone_raw.ycp:90 +#: timezone/src/data/timezone_raw.ycp:90 msgid "Poland" msgstr "폴란드" -#: timezone/src/data/timezone_raw.ycp:91 +#: timezone/src/data/timezone_raw.ycp:91 msgid "Croatia" msgstr "크로아티아" -#. time zone +#. time zone #: timezone/src/data/timezone_raw.ycp:93 -#: timezone/src/data/timezone_raw.ycp:882 +#: timezone/src/data/timezone_raw.ycp:882 msgid "Iceland" msgstr "아이스랜드" -#. time zone +#. time zone #: timezone/src/data/timezone_raw.ycp:95 -#: timezone/src/data/timezone_raw.ycp:878 +#: timezone/src/data/timezone_raw.ycp:878 msgid "Azores" msgstr "아조레스제도" -#. time zone +#. time zone #: timezone/src/data/timezone_raw.ycp:97 -#: timezone/src/data/timezone_raw.ycp:880 +#: timezone/src/data/timezone_raw.ycp:880 msgid "Canary Islands" msgstr "카나리아 제도" -#: timezone/src/data/timezone_raw.ycp:98 +#: timezone/src/data/timezone_raw.ycp:98 msgid "Switzerland" msgstr "스위스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:100 +#. time zone +#: timezone/src/data/timezone_raw.ycp:100 msgid "Ukraine (Zaporozhye)" msgstr "우크라이나(자포로제)" -#. time zone -#. GL -#. time zone -#: timezone/src/data/timezone_raw.ycp:103 -#: timezone/src/data/timezone_raw.ycp:908 +#. time zone +#. GL +#. time zone +#: timezone/src/data/timezone_raw.ycp:103 +#: timezone/src/data/timezone_raw.ycp:908 msgid "Miquelon" msgstr "미클롱섬" -#. name of time zone region -#: timezone/src/data/timezone_raw.ycp:111 +#. name of time zone region +#: timezone/src/data/timezone_raw.ycp:111 msgid "USA" msgstr "미국" -#. time zone -#: timezone/src/data/timezone_raw.ycp:114 +#. time zone +#: timezone/src/data/timezone_raw.ycp:114 msgid "Alaska (Anchorage)" msgstr "알래스카(앵커리지)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:116 +#. time zone +#: timezone/src/data/timezone_raw.ycp:116 msgid "Aleutian (Adak)" msgstr "알루샨(에이닥)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:118 +#. time zone +#: timezone/src/data/timezone_raw.ycp:118 msgid "Boise" msgstr "보이즈" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:120 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:120 msgid "Arizona (Phoenix)" msgstr "아리조나(피닉스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:122 +#. time zone +#: timezone/src/data/timezone_raw.ycp:122 msgid "Central (Chicago)" msgstr "센트럴(시카고)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:124 +#. time zone +#: timezone/src/data/timezone_raw.ycp:124 msgid "Kentucky (Louisville)" msgstr "켄터키(루이빌)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:126 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:126 msgid "Kentucky (Monticello)" msgstr "켄터키(몬티첼로)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:128 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:128 msgid "East Indiana (Indianapolis)" msgstr "동부인디애나(인디애나폴리스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:130 +#. time zone +#: timezone/src/data/timezone_raw.ycp:130 msgid "Indiana Starke (Knox)" msgstr "인디애나스타크(녹스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:132 +#. time zone +#: timezone/src/data/timezone_raw.ycp:132 msgid "Indiana (Vincennes)" msgstr "인디애나(뱅센)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:134 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:134 msgid "Indiana (Winamac)" msgstr "인디애나(워너맥)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:136 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:136 msgid "Indiana (Marengo)" msgstr "인디애나(마랭고)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:138 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:138 msgid "Indiana (Vevay)" msgstr "인디애나(베베이)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:140 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:140 msgid "Indiana (Tell City)" msgstr "인디애나(텔시)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:142 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:142 msgid "Indiana (Petersburg)" msgstr "인디애나(피터스버그)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:144 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:144 msgid "Juneau" msgstr "주노" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:146 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:146 msgid "Michigan (Detroit)" msgstr "미시간(디트로이트)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:148 +#. time zone +#: timezone/src/data/timezone_raw.ycp:148 msgid "Mountain (Denver)" msgstr "마운틴(덴버)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:150 +#. time zone +#: timezone/src/data/timezone_raw.ycp:150 msgid "Pacific (Los Angeles)" msgstr "태평양(로스엔젤레스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:152 +#. time zone +#: timezone/src/data/timezone_raw.ycp:152 msgid "Menominee" msgstr "메노미니" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:154 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:154 msgid "Eastern (New York)" msgstr "동부(뉴욕)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:156 +#. time zone +#: timezone/src/data/timezone_raw.ycp:156 msgid "Nome" msgstr "놈" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:158 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:158 msgid "North Dakota (Center)" msgstr "노스다코타(중부)" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:160 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:160 msgid "North Dakota (New Salem)" msgstr "노스다코타(뉴세일럼)" -#. time zone -#. TT -#. time zone -#: timezone/src/data/timezone_raw.ycp:162 -#: timezone/src/data/timezone_raw.ycp:405 +#. time zone +#. TT +#. time zone +#: timezone/src/data/timezone_raw.ycp:162 +#: timezone/src/data/timezone_raw.ycp:405 msgid "Puerto Rico" msgstr "푸에르토리코" -#. time zone -#: timezone/src/data/timezone_raw.ycp:164 +#. time zone +#: timezone/src/data/timezone_raw.ycp:164 msgid "Shiprock" msgstr "쉽락" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:166 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:166 msgid "Virgin Islands (St Thomas)" msgstr "버진 제도(세인트 토마스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:168 +#. time zone +#: timezone/src/data/timezone_raw.ycp:168 msgid "Yakutat" msgstr "야쿠타트" -#. US -#. time zone -#: timezone/src/data/timezone_raw.ycp:171 +#. US +#. time zone +#: timezone/src/data/timezone_raw.ycp:171 msgid "Hawaii (Honolulu)" msgstr "하와이(호놀룰루)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:173 +#. time zone +#: timezone/src/data/timezone_raw.ycp:173 msgid "Samoa (Pago Pago)" msgstr "사모아(파고파고)" -#. time zone region -#: timezone/src/data/timezone_raw.ycp:180 +#. time zone region +#: timezone/src/data/timezone_raw.ycp:180 msgid "Canada" msgstr "캐나다" -#. time zone -#: timezone/src/data/timezone_raw.ycp:183 +#. time zone +#: timezone/src/data/timezone_raw.ycp:183 msgid "Atlantic (Halifax)" msgstr "대서양(핼리팩스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:185 +#. time zone +#: timezone/src/data/timezone_raw.ycp:185 msgid "Central (Winnipeg)" msgstr "센트럴(위니펙)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:187 +#. time zone +#: timezone/src/data/timezone_raw.ycp:187 msgid "Eastern (Toronto)" msgstr "동부(토론토)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:189 +#. time zone +#: timezone/src/data/timezone_raw.ycp:189 msgid "Mountain (Edmonton)" msgstr "마운틴(에드먼턴)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:191 +#. time zone +#: timezone/src/data/timezone_raw.ycp:191 msgid "Newfoundland (St Johns)" msgstr "뉴펀들랜드(세인트 존스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:193 +#. time zone +#: timezone/src/data/timezone_raw.ycp:193 msgid "Pacific (Vancouver)" msgstr "태평양(밴쿠버)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:195 +#. time zone +#: timezone/src/data/timezone_raw.ycp:195 msgid "Saskatchewan (Regina)" msgstr "서스캐처원(레지나)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:197 +#. time zone +#: timezone/src/data/timezone_raw.ycp:197 msgid "Yukon (Whitehorse)" msgstr "유콘(화이트호스)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:199 +#. time zone +#: timezone/src/data/timezone_raw.ycp:199 msgid "Glace Bay" msgstr "글라스베이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:201 +#. time zone +#: timezone/src/data/timezone_raw.ycp:201 msgid "Moncton" msgstr "몽톤" -#. time zone -#: timezone/src/data/timezone_raw.ycp:203 +#. time zone +#: timezone/src/data/timezone_raw.ycp:203 msgid "Goose Bay" msgstr "구스베이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:205 +#. time zone +#: timezone/src/data/timezone_raw.ycp:205 msgid "Blanc-Sablon" msgstr "블랑크-사블론" -#. time zone -#: timezone/src/data/timezone_raw.ycp:207 +#. time zone +#: timezone/src/data/timezone_raw.ycp:207 msgid "Montreal" msgstr "몬트리올" -#. time zone -#: timezone/src/data/timezone_raw.ycp:209 +#. time zone +#: timezone/src/data/timezone_raw.ycp:209 msgid "Nipigon" msgstr "니피곤" -#. time zone -#: timezone/src/data/timezone_raw.ycp:211 +#. time zone +#: timezone/src/data/timezone_raw.ycp:211 msgid "Thunder Bay" msgstr "선더베이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:213 +#. time zone +#: timezone/src/data/timezone_raw.ycp:213 msgid "Iqaluit" msgstr "이칼루잇" -#. time zone -#: timezone/src/data/timezone_raw.ycp:215 +#. time zone +#: timezone/src/data/timezone_raw.ycp:215 msgid "Pangnirtung" msgstr "팡니르퉁" -#. time zone -#: timezone/src/data/timezone_raw.ycp:217 +#. time zone +#: timezone/src/data/timezone_raw.ycp:217 msgid "Resolute" msgstr "레절룻" -#. time zone -#: timezone/src/data/timezone_raw.ycp:219 +#. time zone +#: timezone/src/data/timezone_raw.ycp:219 msgid "Atikokan" msgstr "아티코칸" -#. time zone -#: timezone/src/data/timezone_raw.ycp:221 +#. time zone +#: timezone/src/data/timezone_raw.ycp:221 msgid "Rankin Inlet" msgstr "랜킨 인렛" -#. time zone -#: timezone/src/data/timezone_raw.ycp:223 +#. time zone +#: timezone/src/data/timezone_raw.ycp:223 msgid "Rainy River" msgstr "레이니강" -#. time zone -#: timezone/src/data/timezone_raw.ycp:225 +#. time zone +#: timezone/src/data/timezone_raw.ycp:225 msgid "Swift Current" msgstr "스위프트커런트" -#. time zone -#: timezone/src/data/timezone_raw.ycp:227 +#. time zone +#: timezone/src/data/timezone_raw.ycp:227 msgid "Cambridge Bay" msgstr "캠브리지 베이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:229 +#. time zone +#: timezone/src/data/timezone_raw.ycp:229 msgid "Yellowknife" msgstr "옐로나이프" -#. time zone -#: timezone/src/data/timezone_raw.ycp:231 +#. time zone +#: timezone/src/data/timezone_raw.ycp:231 msgid "Inuvik" msgstr "이누빅" -#. time zone -#: timezone/src/data/timezone_raw.ycp:233 +#. time zone +#: timezone/src/data/timezone_raw.ycp:233 msgid "Dawson Creek" msgstr "도슨크릭" -#. time zone -#: timezone/src/data/timezone_raw.ycp:235 +#. time zone +#: timezone/src/data/timezone_raw.ycp:235 msgid "Dawson" msgstr "도슨" -#. time zone region -#: timezone/src/data/timezone_raw.ycp:243 +#. time zone region +#: timezone/src/data/timezone_raw.ycp:243 msgid "Argentina" msgstr "아르헨티나" -#. time zone -#: timezone/src/data/timezone_raw.ycp:246 +#. time zone +#: timezone/src/data/timezone_raw.ycp:246 msgid "Buenos Aires" msgstr "부에노스 아이레스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:248 +#. time zone +#: timezone/src/data/timezone_raw.ycp:248 msgid "Catamarca" msgstr "카타마르카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:250 +#. time zone +#: timezone/src/data/timezone_raw.ycp:250 msgid "Cordoba" msgstr "코르도바" -#. time zone -#: timezone/src/data/timezone_raw.ycp:252 +#. time zone +#: timezone/src/data/timezone_raw.ycp:252 msgid "Jujuy" msgstr "후후이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:254 +#. time zone +#: timezone/src/data/timezone_raw.ycp:254 msgid "La Rioja" msgstr "라리오하" -#. time zone -#: timezone/src/data/timezone_raw.ycp:256 +#. time zone +#: timezone/src/data/timezone_raw.ycp:256 msgid "Mendoza" msgstr "멘도사" -#. time zone -#: timezone/src/data/timezone_raw.ycp:258 +#. time zone +#: timezone/src/data/timezone_raw.ycp:258 msgid "Rio Gallegos" msgstr "리오가제고스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:260 +#. time zone +#: timezone/src/data/timezone_raw.ycp:260 msgid "San Juan" msgstr "산후안" -#. time zone -#: timezone/src/data/timezone_raw.ycp:262 +#. time zone +#: timezone/src/data/timezone_raw.ycp:262 msgid "San Luis" msgstr "산 루이스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:264 +#. time zone +#: timezone/src/data/timezone_raw.ycp:264 msgid "Tucuman" msgstr "투쿠만" -#. time zone -#: timezone/src/data/timezone_raw.ycp:266 +#. time zone +#: timezone/src/data/timezone_raw.ycp:266 msgid "Ushuaia" msgstr "우슈아이아" -#. time zone region -#: timezone/src/data/timezone_raw.ycp:273 +#. time zone region +#: timezone/src/data/timezone_raw.ycp:273 msgid "Brazil" msgstr "브라질" -#. time zone -#: timezone/src/data/timezone_raw.ycp:276 +#. time zone +#: timezone/src/data/timezone_raw.ycp:276 msgid "Araguaina" msgstr "아라구에이나" -#. time zone -#: timezone/src/data/timezone_raw.ycp:278 +#. time zone +#: timezone/src/data/timezone_raw.ycp:278 msgid "Bahia" msgstr "바히아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:280 +#. time zone +#: timezone/src/data/timezone_raw.ycp:280 msgid "Belem" msgstr "벨렘" -#. time zone -#: timezone/src/data/timezone_raw.ycp:282 +#. time zone +#: timezone/src/data/timezone_raw.ycp:282 msgid "Boa Vista" msgstr "보아비스타" -#. time zone -#: timezone/src/data/timezone_raw.ycp:284 +#. time zone +#: timezone/src/data/timezone_raw.ycp:284 msgid "Campo Grande" msgstr "캄푸그란지" -#. time zone -#: timezone/src/data/timezone_raw.ycp:286 +#. time zone +#: timezone/src/data/timezone_raw.ycp:286 msgid "Cuiaba" msgstr "쿠이아바" -#. time zone -#: timezone/src/data/timezone_raw.ycp:288 +#. time zone +#: timezone/src/data/timezone_raw.ycp:288 msgid "Eirunepe" msgstr "에이루네프" -#. time zone -#: timezone/src/data/timezone_raw.ycp:290 +#. time zone +#: timezone/src/data/timezone_raw.ycp:290 msgid "Fortaleza" msgstr "포르탈레자" -#. time zone -#: timezone/src/data/timezone_raw.ycp:292 +#. time zone +#: timezone/src/data/timezone_raw.ycp:292 msgid "Maceio" msgstr "마세이우" -#. time zone -#: timezone/src/data/timezone_raw.ycp:294 +#. time zone +#: timezone/src/data/timezone_raw.ycp:294 msgid "Manaus" msgstr "마나우스" -#. _("Brazil West"), -#. time zone -#: timezone/src/data/timezone_raw.ycp:296 +#. _("Brazil West"), +#. time zone +#: timezone/src/data/timezone_raw.ycp:296 msgid "Fernando de Noronha" msgstr "페르난도 데 노론하" -#. time zone -#: timezone/src/data/timezone_raw.ycp:298 +#. time zone +#: timezone/src/data/timezone_raw.ycp:298 msgid "Porto Velho" msgstr "포르토벨호" -#. time zone -#: timezone/src/data/timezone_raw.ycp:300 +#. time zone +#: timezone/src/data/timezone_raw.ycp:300 msgid "Recife" msgstr "레시페" -#. time zone -#: timezone/src/data/timezone_raw.ycp:302 +#. time zone +#: timezone/src/data/timezone_raw.ycp:302 msgid "Rio Branco" msgstr "리우브랑코" -#. _("Brazil Acre"), -#. time zone -#: timezone/src/data/timezone_raw.ycp:304 +#. _("Brazil Acre"), +#. time zone +#: timezone/src/data/timezone_raw.ycp:304 msgid "Sao Paulo" msgstr "상파울로" -#. time zone region -#: timezone/src/data/timezone_raw.ycp:311 +#. time zone region +#: timezone/src/data/timezone_raw.ycp:311 msgid "Mexico" msgstr "멕시코" -#. time zone -#: timezone/src/data/timezone_raw.ycp:315 +#. time zone +#: timezone/src/data/timezone_raw.ycp:315 msgid "Cancun" msgstr "칸쿤" -#. MX -#. time zone -#: timezone/src/data/timezone_raw.ycp:317 +#. MX +#. time zone +#: timezone/src/data/timezone_raw.ycp:317 msgid "Chihuahua" msgstr "치와와" -#. MX -#. time zone -#: timezone/src/data/timezone_raw.ycp:319 +#. MX +#. time zone +#: timezone/src/data/timezone_raw.ycp:319 msgid "Hermosillo" msgstr "에르모시요" -#. MX -#. time zone -#: timezone/src/data/timezone_raw.ycp:321 +#. MX +#. time zone +#: timezone/src/data/timezone_raw.ycp:321 msgid "Mazatlan" msgstr "마사틀란" -#. time zone -#: timezone/src/data/timezone_raw.ycp:323 +#. time zone +#: timezone/src/data/timezone_raw.ycp:323 msgid "Mexico City" msgstr "멕시코시티" -#. time zone -#: timezone/src/data/timezone_raw.ycp:325 +#. time zone +#: timezone/src/data/timezone_raw.ycp:325 msgid "Merida" msgstr "메리다" -#. MX -#. time zone -#: timezone/src/data/timezone_raw.ycp:327 +#. MX +#. time zone +#: timezone/src/data/timezone_raw.ycp:327 msgid "Monterrey" msgstr "몬테레이" -#. MX -#. time zone -#: timezone/src/data/timezone_raw.ycp:329 +#. MX +#. time zone +#: timezone/src/data/timezone_raw.ycp:329 msgid "Tijuana" msgstr "티후아나" -#. time zone region -#: timezone/src/data/timezone_raw.ycp:336 +#. time zone region +#: timezone/src/data/timezone_raw.ycp:336 msgid "Central and South America" msgstr "중남부 미국" -#. time zone -#: timezone/src/data/timezone_raw.ycp:339 +#. time zone +#: timezone/src/data/timezone_raw.ycp:339 msgid "Antigua" msgstr "애티가" -#. time zone -#: timezone/src/data/timezone_raw.ycp:341 +#. time zone +#: timezone/src/data/timezone_raw.ycp:341 msgid "Anguilla" msgstr "앙귈라" -#. time zone -#: timezone/src/data/timezone_raw.ycp:343 +#. time zone +#: timezone/src/data/timezone_raw.ycp:343 msgid "Aruba" msgstr "아루바" -#. time zone -#: timezone/src/data/timezone_raw.ycp:345 +#. time zone +#: timezone/src/data/timezone_raw.ycp:345 msgid "Asuncion" msgstr "아순시온" -#. time zone -#: timezone/src/data/timezone_raw.ycp:347 +#. time zone +#: timezone/src/data/timezone_raw.ycp:347 msgid "Barbados" msgstr "발바도스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:349 +#. time zone +#: timezone/src/data/timezone_raw.ycp:349 msgid "Belize" msgstr "벨리즈" -#. time zone -#: timezone/src/data/timezone_raw.ycp:351 +#. time zone +#: timezone/src/data/timezone_raw.ycp:351 msgid "Bogota" msgstr "보고타" -#. time zone -#: timezone/src/data/timezone_raw.ycp:353 +#. time zone +#: timezone/src/data/timezone_raw.ycp:353 msgid "Caracas" msgstr "카라카스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:355 +#. time zone +#: timezone/src/data/timezone_raw.ycp:355 msgid "Cayenne" msgstr "카옌" -#. time zone -#: timezone/src/data/timezone_raw.ycp:357 +#. time zone +#: timezone/src/data/timezone_raw.ycp:357 msgid "Cayman Islands" msgstr "케이맨 제도" -#. KY -#. time zone -#: timezone/src/data/timezone_raw.ycp:359 +#. KY +#. time zone +#: timezone/src/data/timezone_raw.ycp:359 msgid "Costa Rica" msgstr "코스타리카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:361 +#. time zone +#: timezone/src/data/timezone_raw.ycp:361 msgid "Curacao" msgstr "쿠라카오" -#. time zone -#: timezone/src/data/timezone_raw.ycp:363 +#. time zone +#: timezone/src/data/timezone_raw.ycp:363 msgid "Dominica" msgstr "도미니카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:365 +#. time zone +#: timezone/src/data/timezone_raw.ycp:365 msgid "El Salvador" msgstr "엘살바도르" -#. time zone -#: timezone/src/data/timezone_raw.ycp:367 +#. time zone +#: timezone/src/data/timezone_raw.ycp:367 msgid "Grand Turk" msgstr "그랜드 터크" -#. TC -#. time zone -#: timezone/src/data/timezone_raw.ycp:369 +#. TC +#. time zone +#: timezone/src/data/timezone_raw.ycp:369 msgid "Guayaquil" msgstr "콰야길" -#. time zone -#: timezone/src/data/timezone_raw.ycp:371 +#. time zone +#: timezone/src/data/timezone_raw.ycp:371 msgid "Grenada" msgstr "그라나다" -#. time zone -#: timezone/src/data/timezone_raw.ycp:373 +#. time zone +#: timezone/src/data/timezone_raw.ycp:373 msgid "Guadeloupe" msgstr "과델로프" -#. time zone -#: timezone/src/data/timezone_raw.ycp:375 +#. time zone +#: timezone/src/data/timezone_raw.ycp:375 msgid "Guatemala" msgstr "과테말라" -#. time zone -#: timezone/src/data/timezone_raw.ycp:377 +#. time zone +#: timezone/src/data/timezone_raw.ycp:377 msgid "Guyana" msgstr "가이아나" -#. time zone -#: timezone/src/data/timezone_raw.ycp:379 +#. time zone +#: timezone/src/data/timezone_raw.ycp:379 msgid "Havana" msgstr "하바나" -#. time zone -#: timezone/src/data/timezone_raw.ycp:381 +#. time zone +#: timezone/src/data/timezone_raw.ycp:381 msgid "Jamaica" msgstr "자메이카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:383 +#. time zone +#: timezone/src/data/timezone_raw.ycp:383 msgid "La Paz" msgstr "라파스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:385 +#. time zone +#: timezone/src/data/timezone_raw.ycp:385 msgid "Lima" msgstr "리마" -#. time zone -#: timezone/src/data/timezone_raw.ycp:387 +#. time zone +#: timezone/src/data/timezone_raw.ycp:387 msgid "Managua" msgstr "마나과" -#. time zone -#: timezone/src/data/timezone_raw.ycp:389 +#. time zone +#: timezone/src/data/timezone_raw.ycp:389 msgid "Martinique" msgstr "마티니크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:391 +#. time zone +#: timezone/src/data/timezone_raw.ycp:391 msgid "Montserrat" msgstr "몬트세라트" -#. MS -#. time zone -#: timezone/src/data/timezone_raw.ycp:393 +#. MS +#. time zone +#: timezone/src/data/timezone_raw.ycp:393 msgid "Uruguay" msgstr "우루과이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:395 +#. time zone +#: timezone/src/data/timezone_raw.ycp:395 msgid "Nassau" msgstr "나사우" -#. time zone -#: timezone/src/data/timezone_raw.ycp:397 +#. time zone +#: timezone/src/data/timezone_raw.ycp:397 msgid "Panama" msgstr "파나마" -#. time zone -#: timezone/src/data/timezone_raw.ycp:399 +#. time zone +#: timezone/src/data/timezone_raw.ycp:399 msgid "Paramaribo" msgstr "파라마리보" -#. SR -#. time zone -#: timezone/src/data/timezone_raw.ycp:401 +#. SR +#. time zone +#: timezone/src/data/timezone_raw.ycp:401 msgid "Port-au-Prince" msgstr "포르토프랭스" -#. HT -#. time zone -#: timezone/src/data/timezone_raw.ycp:403 +#. HT +#. time zone +#: timezone/src/data/timezone_raw.ycp:403 msgid "Port of Spain" msgstr "포트오브스페인" -#. time zone -#: timezone/src/data/timezone_raw.ycp:407 +#. time zone +#: timezone/src/data/timezone_raw.ycp:407 msgid "Chile Continental" msgstr "칠레 콘티넨탈" -#. time zone -#: timezone/src/data/timezone_raw.ycp:409 +#. time zone +#: timezone/src/data/timezone_raw.ycp:409 msgid "Santo Domingo" msgstr "산토 도밍고" -#. DO -#. time zone -#: timezone/src/data/timezone_raw.ycp:411 +#. DO +#. time zone +#: timezone/src/data/timezone_raw.ycp:411 msgid "Saint Lucia" msgstr "세인트 루시아" -#. LC -#. time zone -#: timezone/src/data/timezone_raw.ycp:413 +#. LC +#. time zone +#: timezone/src/data/timezone_raw.ycp:413 msgid "Saint Kitts and Nevis" msgstr "세인트 키츠 네비스" -#. KN -#. time zone -#: timezone/src/data/timezone_raw.ycp:415 +#. KN +#. time zone +#: timezone/src/data/timezone_raw.ycp:415 msgid "St Thomas" msgstr "세인트 토마스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:417 +#. time zone +#: timezone/src/data/timezone_raw.ycp:417 msgid "St Vincent" msgstr "세인트 빈센트" -#. VC -#. time zone -#: timezone/src/data/timezone_raw.ycp:419 +#. VC +#. time zone +#: timezone/src/data/timezone_raw.ycp:419 msgid "Tegucigalpa" msgstr "테그시갈파" -#. HN -#. time zone -#: timezone/src/data/timezone_raw.ycp:421 +#. HN +#. time zone +#: timezone/src/data/timezone_raw.ycp:421 msgid "Tortola" msgstr "토르톨라" -#. VG -#. time zone -#: timezone/src/data/timezone_raw.ycp:424 -#: timezone/src/data/timezone_raw.ycp:884 +#. VG +#. time zone +#: timezone/src/data/timezone_raw.ycp:424 +#: timezone/src/data/timezone_raw.ycp:884 msgid "Stanley" msgstr "스탠리" -#. Falklands -#. time zone -#. WS -#. time zone -#: timezone/src/data/timezone_raw.ycp:427 -#: timezone/src/data/timezone_raw.ycp:866 +#. Falklands +#. time zone +#. WS +#. time zone +#: timezone/src/data/timezone_raw.ycp:427 +#: timezone/src/data/timezone_raw.ycp:866 msgid "Easter Island" msgstr "이스터 제도" -#. time zone -#: timezone/src/data/timezone_raw.ycp:429 +#. time zone +#: timezone/src/data/timezone_raw.ycp:429 msgid "Galapagos" msgstr "갈라파고스" -#. name of region -#: timezone/src/data/timezone_raw.ycp:436 +#. name of region +#: timezone/src/data/timezone_raw.ycp:436 msgid "Russia" msgstr "러시아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:439 +#. time zone +#: timezone/src/data/timezone_raw.ycp:439 msgid "Kaliningrad" msgstr "칼리닌그라드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:441 +#. time zone +#: timezone/src/data/timezone_raw.ycp:441 msgid "Moscow" msgstr "모스크바" -#. time zone -#: timezone/src/data/timezone_raw.ycp:443 +#. time zone +#: timezone/src/data/timezone_raw.ycp:443 msgid "Samara" msgstr "사마라" -#. time zone -#: timezone/src/data/timezone_raw.ycp:445 +#. time zone +#: timezone/src/data/timezone_raw.ycp:445 msgid "Volgograd" msgstr "볼고그라드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:447 -#: timezone/src/data/timezone_raw.ycp:489 +#. time zone +#: timezone/src/data/timezone_raw.ycp:447 +#: timezone/src/data/timezone_raw.ycp:489 msgid "Anadyr" msgstr "아나디르" -#. time zone -#. MN -#. time zone -#: timezone/src/data/timezone_raw.ycp:449 -#: timezone/src/data/timezone_raw.ycp:531 +#. time zone +#. MN +#. time zone +#: timezone/src/data/timezone_raw.ycp:449 +#: timezone/src/data/timezone_raw.ycp:531 msgid "Irkutsk" msgstr "이르쿠츠크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:451 -#: timezone/src/data/timezone_raw.ycp:543 +#. time zone +#: timezone/src/data/timezone_raw.ycp:451 +#: timezone/src/data/timezone_raw.ycp:543 msgid "Kamchatka" msgstr "캄차카 반도" -#. time zone -#: timezone/src/data/timezone_raw.ycp:453 -#: timezone/src/data/timezone_raw.ycp:549 +#. time zone +#: timezone/src/data/timezone_raw.ycp:453 +#: timezone/src/data/timezone_raw.ycp:549 msgid "Krasnoyarsk" msgstr "크라스노야르스크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:455 -#: timezone/src/data/timezone_raw.ycp:559 +#. time zone +#: timezone/src/data/timezone_raw.ycp:455 +#: timezone/src/data/timezone_raw.ycp:559 msgid "Magadan" msgstr "마가단" -#. time zone -#: timezone/src/data/timezone_raw.ycp:457 -#: timezone/src/data/timezone_raw.ycp:569 +#. time zone +#: timezone/src/data/timezone_raw.ycp:457 +#: timezone/src/data/timezone_raw.ycp:569 msgid "Novosibirsk" msgstr "노보시비르스크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:459 -#: timezone/src/data/timezone_raw.ycp:571 +#. time zone +#: timezone/src/data/timezone_raw.ycp:459 +#: timezone/src/data/timezone_raw.ycp:571 msgid "Omsk" msgstr "옴스크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:461 -#: timezone/src/data/timezone_raw.ycp:589 +#. time zone +#: timezone/src/data/timezone_raw.ycp:461 +#: timezone/src/data/timezone_raw.ycp:589 msgid "Sakhalin" msgstr "사할린" -#. time zone -#: timezone/src/data/timezone_raw.ycp:463 -#: timezone/src/data/timezone_raw.ycp:599 +#. time zone +#: timezone/src/data/timezone_raw.ycp:463 +#: timezone/src/data/timezone_raw.ycp:599 msgid "Vladivostok" msgstr "블라디보스톡" -#. time zone -#: timezone/src/data/timezone_raw.ycp:465 -#: timezone/src/data/timezone_raw.ycp:627 +#. time zone +#: timezone/src/data/timezone_raw.ycp:465 +#: timezone/src/data/timezone_raw.ycp:627 msgid "Yakutsk" msgstr "야쿠츠크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:467 -#: timezone/src/data/timezone_raw.ycp:601 +#. time zone +#: timezone/src/data/timezone_raw.ycp:467 +#: timezone/src/data/timezone_raw.ycp:601 msgid "Yekaterinburg" msgstr "예카테린버그" -#. name of region -#: timezone/src/data/timezone_raw.ycp:474 +#. name of region +#: timezone/src/data/timezone_raw.ycp:474 msgid "Asia" msgstr "아시아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:477 +#. time zone +#: timezone/src/data/timezone_raw.ycp:477 msgid "Aden" msgstr "아덴" -#. YE -#. time zone -#: timezone/src/data/timezone_raw.ycp:479 +#. YE +#. time zone +#: timezone/src/data/timezone_raw.ycp:479 msgid "Almaty" msgstr "알마티" -#. time zone -#: timezone/src/data/timezone_raw.ycp:481 +#. time zone +#: timezone/src/data/timezone_raw.ycp:481 msgid "Amman" msgstr "암만" -#. JO -#. time zone -#: timezone/src/data/timezone_raw.ycp:483 +#. JO +#. time zone +#: timezone/src/data/timezone_raw.ycp:483 msgid "Aqtobe" msgstr "악퇴베" -#. KZ -#. time zone -#: timezone/src/data/timezone_raw.ycp:485 +#. KZ +#. time zone +#: timezone/src/data/timezone_raw.ycp:485 msgid "Aqtau" msgstr "악타우" -#. KZ -#. time zone -#: timezone/src/data/timezone_raw.ycp:487 +#. KZ +#. time zone +#: timezone/src/data/timezone_raw.ycp:487 msgid "Ashgabat" msgstr "아쉬가바트" -#. time zone -#: timezone/src/data/timezone_raw.ycp:491 +#. time zone +#: timezone/src/data/timezone_raw.ycp:491 msgid "Baghdad" msgstr "바그다드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:493 +#. time zone +#: timezone/src/data/timezone_raw.ycp:493 msgid "Bahrain" msgstr "바레인" -#. time zone -#: timezone/src/data/timezone_raw.ycp:495 +#. time zone +#: timezone/src/data/timezone_raw.ycp:495 msgid "Baku" msgstr "바쿠" -#. time zone -#: timezone/src/data/timezone_raw.ycp:497 +#. time zone +#: timezone/src/data/timezone_raw.ycp:497 msgid "Bangkok" msgstr "방콕" -#. time zone -#: timezone/src/data/timezone_raw.ycp:499 +#. time zone +#: timezone/src/data/timezone_raw.ycp:499 msgid "Beirut" msgstr "베이루트" -#. time zone -#: timezone/src/data/timezone_raw.ycp:501 +#. time zone +#: timezone/src/data/timezone_raw.ycp:501 msgid "Bishkek" msgstr "비슈케크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:503 +#. time zone +#: timezone/src/data/timezone_raw.ycp:503 msgid "Brunei" msgstr "브루나이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:505 +#. time zone +#: timezone/src/data/timezone_raw.ycp:505 msgid "Kolkata" msgstr "콜카타" -#. time zone -#: timezone/src/data/timezone_raw.ycp:507 +#. time zone +#: timezone/src/data/timezone_raw.ycp:507 msgid "Choibalsan" msgstr "초이발산" -#. MN -#. time zone -#: timezone/src/data/timezone_raw.ycp:509 +#. MN +#. time zone +#: timezone/src/data/timezone_raw.ycp:509 msgid "Chongqing" msgstr "충칭" -#. CN -#. time zone -#: timezone/src/data/timezone_raw.ycp:511 +#. CN +#. time zone +#: timezone/src/data/timezone_raw.ycp:511 msgid "Colombo" msgstr "콜롬보" -#. time zone -#: timezone/src/data/timezone_raw.ycp:513 +#. time zone +#: timezone/src/data/timezone_raw.ycp:513 msgid "Damascus" msgstr "다마스커스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:515 +#. time zone +#: timezone/src/data/timezone_raw.ycp:515 msgid "Dhaka" msgstr "다카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:517 +#. time zone +#: timezone/src/data/timezone_raw.ycp:517 msgid "Dili" msgstr "딜리" -#. TL -#. time zone -#: timezone/src/data/timezone_raw.ycp:519 +#. TL +#. time zone +#: timezone/src/data/timezone_raw.ycp:519 msgid "Dubai" msgstr "두바이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:521 +#. time zone +#: timezone/src/data/timezone_raw.ycp:521 msgid "Dushanbe" msgstr "두샨베" -#. TJ -#. time zone -#: timezone/src/data/timezone_raw.ycp:523 +#. TJ +#. time zone +#: timezone/src/data/timezone_raw.ycp:523 msgid "Gaza" msgstr "가자" -#. time zone -#: timezone/src/data/timezone_raw.ycp:525 +#. time zone +#: timezone/src/data/timezone_raw.ycp:525 msgid "Harbin" msgstr "하얼빈" -#. CN -#. time zone -#: timezone/src/data/timezone_raw.ycp:527 +#. CN +#. time zone +#: timezone/src/data/timezone_raw.ycp:527 msgid "Hongkong" msgstr "홍콩" -#. time zone -#: timezone/src/data/timezone_raw.ycp:529 +#. time zone +#: timezone/src/data/timezone_raw.ycp:529 msgid "Hovd" msgstr "호브드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:533 +#. time zone +#: timezone/src/data/timezone_raw.ycp:533 msgid "Jakarta" msgstr "자카르타" -#. time zone -#: timezone/src/data/timezone_raw.ycp:535 +#. time zone +#: timezone/src/data/timezone_raw.ycp:535 msgid "Jayapura" msgstr "자야푸라" -#. ID -#. time zone -#: timezone/src/data/timezone_raw.ycp:537 +#. ID +#. time zone +#: timezone/src/data/timezone_raw.ycp:537 msgid "Israel" msgstr "이스라엘" -#. time zone -#: timezone/src/data/timezone_raw.ycp:539 +#. time zone +#: timezone/src/data/timezone_raw.ycp:539 msgid "Afghanistan" msgstr "아프가니스탄" -#. time zone -#: timezone/src/data/timezone_raw.ycp:541 +#. time zone +#: timezone/src/data/timezone_raw.ycp:541 msgid "Karachi" msgstr "카라치" -#. time zone -#: timezone/src/data/timezone_raw.ycp:545 +#. time zone +#: timezone/src/data/timezone_raw.ycp:545 msgid "Kashgar" msgstr "카슈가르" -#. CN -#. time zone -#: timezone/src/data/timezone_raw.ycp:547 +#. CN +#. time zone +#: timezone/src/data/timezone_raw.ycp:547 msgid "Kathmandu" msgstr "카트만두" -#. time zone -#: timezone/src/data/timezone_raw.ycp:551 +#. time zone +#: timezone/src/data/timezone_raw.ycp:551 msgid "Kuala Lumpur" msgstr "쿠알라 룸푸르" -#. time zone -#: timezone/src/data/timezone_raw.ycp:553 +#. time zone +#: timezone/src/data/timezone_raw.ycp:553 msgid "Kuching" msgstr "쿠칭" -#. MY -#. time zone -#: timezone/src/data/timezone_raw.ycp:555 +#. MY +#. time zone +#: timezone/src/data/timezone_raw.ycp:555 msgid "Kuwait" msgstr "쿠웨이트" -#. time zone -#: timezone/src/data/timezone_raw.ycp:557 +#. time zone +#: timezone/src/data/timezone_raw.ycp:557 msgid "Macao" msgstr "마카오" -#. time zone -#: timezone/src/data/timezone_raw.ycp:561 +#. time zone +#: timezone/src/data/timezone_raw.ycp:561 msgid "Makassar" msgstr "마카사르" -#. ID -#. time zone -#: timezone/src/data/timezone_raw.ycp:563 +#. ID +#. time zone +#: timezone/src/data/timezone_raw.ycp:563 msgid "Manila" msgstr "마닐라" -#. time zone -#: timezone/src/data/timezone_raw.ycp:565 +#. time zone +#: timezone/src/data/timezone_raw.ycp:565 msgid "Muscat" msgstr "무스카트" -#. OM -#. time zone -#: timezone/src/data/timezone_raw.ycp:567 +#. OM +#. time zone +#: timezone/src/data/timezone_raw.ycp:567 msgid "Nicosia" msgstr "니코시아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:573 +#. time zone +#: timezone/src/data/timezone_raw.ycp:573 msgid "Oral" msgstr "오랄" -#. KZ -#. time zone -#: timezone/src/data/timezone_raw.ycp:575 +#. KZ +#. time zone +#: timezone/src/data/timezone_raw.ycp:575 msgid "Phnom Penh" msgstr "프놈펜" -#. time zone -#: timezone/src/data/timezone_raw.ycp:577 +#. time zone +#: timezone/src/data/timezone_raw.ycp:577 msgid "Pontianak" msgstr "폰티아나크" -#. ID -#. time zone -#: timezone/src/data/timezone_raw.ycp:579 +#. ID +#. time zone +#: timezone/src/data/timezone_raw.ycp:579 msgid "Pyongyang" msgstr "평양" -#. time zone -#: timezone/src/data/timezone_raw.ycp:581 +#. time zone +#: timezone/src/data/timezone_raw.ycp:581 msgid "Qatar" msgstr "카타르" -#. time zone -#: timezone/src/data/timezone_raw.ycp:583 +#. time zone +#: timezone/src/data/timezone_raw.ycp:583 msgid "Qyzylorda" msgstr "끄즐오르다" -#. KZ -#. time zone -#: timezone/src/data/timezone_raw.ycp:585 +#. KZ +#. time zone +#: timezone/src/data/timezone_raw.ycp:585 msgid "Myanmar" msgstr "미얀마" -#. time zone -#: timezone/src/data/timezone_raw.ycp:587 +#. time zone +#: timezone/src/data/timezone_raw.ycp:587 msgid "Ho Chi Minh City" msgstr "호찌민 시" -#. time zone -#: timezone/src/data/timezone_raw.ycp:591 +#. time zone +#: timezone/src/data/timezone_raw.ycp:591 msgid "Samarkand" msgstr "사마르칸드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:593 +#. time zone +#: timezone/src/data/timezone_raw.ycp:593 msgid "Tashkent" msgstr "타쉬켄트" -#. time zone -#: timezone/src/data/timezone_raw.ycp:595 +#. time zone +#: timezone/src/data/timezone_raw.ycp:595 msgid "Tehran" msgstr "테헤란" -#. time zone -#: timezone/src/data/timezone_raw.ycp:597 +#. time zone +#: timezone/src/data/timezone_raw.ycp:597 msgid "Thimphu" msgstr "팀부" -#. time zone -#: timezone/src/data/timezone_raw.ycp:603 +#. time zone +#: timezone/src/data/timezone_raw.ycp:603 msgid "Tokyo" msgstr "도쿄" -#. time zone -#: timezone/src/data/timezone_raw.ycp:605 +#. time zone +#: timezone/src/data/timezone_raw.ycp:605 msgid "Shanghai" msgstr "상하이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:607 +#. time zone +#: timezone/src/data/timezone_raw.ycp:607 msgid "Beijing" msgstr "베이징" -#. time zone -#: timezone/src/data/timezone_raw.ycp:609 +#. time zone +#: timezone/src/data/timezone_raw.ycp:609 msgid "Taipei" msgstr "타이페이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:611 +#. time zone +#: timezone/src/data/timezone_raw.ycp:611 msgid "Seoul" msgstr "서울" -#. time zone -#: timezone/src/data/timezone_raw.ycp:613 +#. time zone +#: timezone/src/data/timezone_raw.ycp:613 msgid "Riyadh" msgstr "리야드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:615 +#. time zone +#: timezone/src/data/timezone_raw.ycp:615 msgid "Singapore" msgstr "싱가포르" -#. time zone -#: timezone/src/data/timezone_raw.ycp:617 +#. time zone +#: timezone/src/data/timezone_raw.ycp:617 msgid "Tbilisi" msgstr "트빌리시" -#. time zone -#: timezone/src/data/timezone_raw.ycp:619 +#. time zone +#: timezone/src/data/timezone_raw.ycp:619 msgid "Japan" msgstr "일본" -#. time zone -#: timezone/src/data/timezone_raw.ycp:621 +#. time zone +#: timezone/src/data/timezone_raw.ycp:621 msgid "Ulan Bator" msgstr "울란바토르" -#. time zone -#: timezone/src/data/timezone_raw.ycp:623 +#. time zone +#: timezone/src/data/timezone_raw.ycp:623 msgid "Urumqi" msgstr "우루무치" -#. CN -#. time zone -#: timezone/src/data/timezone_raw.ycp:625 +#. CN +#. time zone +#: timezone/src/data/timezone_raw.ycp:625 msgid "Vientiane" msgstr "비엔티안" -#. time zone -#: timezone/src/data/timezone_raw.ycp:629 +#. time zone +#: timezone/src/data/timezone_raw.ycp:629 msgid "Yerevan" msgstr "예레반" -#. time zone -#: timezone/src/data/timezone_raw.ycp:632 +#. time zone +#: timezone/src/data/timezone_raw.ycp:632 msgid "Mideast Riyadh87" msgstr "중동 리야드87" -#. time zone -#: timezone/src/data/timezone_raw.ycp:634 +#. time zone +#: timezone/src/data/timezone_raw.ycp:634 msgid "Mideast Riyadh88" msgstr "중동 리야드88" -#. time zone -#: timezone/src/data/timezone_raw.ycp:636 +#. time zone +#: timezone/src/data/timezone_raw.ycp:636 msgid "Mideast Riyadh89" msgstr "중동 리야드89" -#. name of region -#: timezone/src/data/timezone_raw.ycp:644 +#. name of region +#: timezone/src/data/timezone_raw.ycp:644 msgid "Australia" msgstr "오스트레일리아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:647 +#. time zone +#: timezone/src/data/timezone_raw.ycp:647 msgid "Lindeman" msgstr "린드만" -#. AU -#. time zone -#: timezone/src/data/timezone_raw.ycp:649 +#. AU +#. time zone +#: timezone/src/data/timezone_raw.ycp:649 msgid "Eucla" msgstr "유클라" -#. AU -#. time zone -#: timezone/src/data/timezone_raw.ycp:651 +#. AU +#. time zone +#: timezone/src/data/timezone_raw.ycp:651 msgid "Lord Howe Island" msgstr "로드하우군도" -#. time zone -#: timezone/src/data/timezone_raw.ycp:653 +#. time zone +#: timezone/src/data/timezone_raw.ycp:653 msgid "Northern Territory (Darwin)" msgstr "노던테리토리(다윈)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:655 +#. time zone +#: timezone/src/data/timezone_raw.ycp:655 msgid "Queensland (Brisbane)" msgstr "퀸즐랜드(브리즈번)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:657 +#. time zone +#: timezone/src/data/timezone_raw.ycp:657 msgid "South Australia (Adelaide)" msgstr "사우스오스트레일리아(애들레이드)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:659 +#. time zone +#: timezone/src/data/timezone_raw.ycp:659 msgid "New South Wales (Sydney)" msgstr "뉴사우스웨일스(시드니)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:661 +#. time zone +#: timezone/src/data/timezone_raw.ycp:661 msgid "New South Wales (Broken Hill)" msgstr "뉴사우스웨일스(브로큰힐)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:663 +#. time zone +#: timezone/src/data/timezone_raw.ycp:663 msgid "Tasmania (Hobart)" msgstr "태즈매니아(호바트)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:665 +#. time zone +#: timezone/src/data/timezone_raw.ycp:665 msgid "Tasmania (Currie)" msgstr "태즈매니아(커리)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:667 +#. time zone +#: timezone/src/data/timezone_raw.ycp:667 msgid "Victoria (Melbourne)" msgstr "빅토리아(멜버른)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:669 +#. time zone +#: timezone/src/data/timezone_raw.ycp:669 msgid "Western Australia (Perth)" msgstr "웨스턴오스트레일리아(퍼스)" -#. name of region -#: timezone/src/data/timezone_raw.ycp:677 +#. name of region +#: timezone/src/data/timezone_raw.ycp:677 msgid "Africa" msgstr "아프리카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:681 +#. time zone +#: timezone/src/data/timezone_raw.ycp:681 msgid "Abidjan" msgstr "아비장" -#. CI -#. time zone -#: timezone/src/data/timezone_raw.ycp:683 +#. CI +#. time zone +#: timezone/src/data/timezone_raw.ycp:683 msgid "Addis Ababa" msgstr "아디스아바바" -#. time zone -#: timezone/src/data/timezone_raw.ycp:685 +#. time zone +#: timezone/src/data/timezone_raw.ycp:685 msgid "Algiers" msgstr "알제리아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:687 +#. time zone +#: timezone/src/data/timezone_raw.ycp:687 msgid "Asmara" msgstr "아스마라" -#. ER -#. time zone -#: timezone/src/data/timezone_raw.ycp:689 +#. ER +#. time zone +#: timezone/src/data/timezone_raw.ycp:689 msgid "Accra" msgstr "아크라" -#. GH -#. time zone -#: timezone/src/data/timezone_raw.ycp:691 +#. GH +#. time zone +#: timezone/src/data/timezone_raw.ycp:691 msgid "Bamako" msgstr "바마코" -#. time zone -#: timezone/src/data/timezone_raw.ycp:693 +#. time zone +#: timezone/src/data/timezone_raw.ycp:693 msgid "Bangui" msgstr "방기" -#. CF -#. time zone -#: timezone/src/data/timezone_raw.ycp:695 +#. CF +#. time zone +#: timezone/src/data/timezone_raw.ycp:695 msgid "Banjul" msgstr "반줄" -#. GM -#. time zone -#: timezone/src/data/timezone_raw.ycp:697 +#. GM +#. time zone +#: timezone/src/data/timezone_raw.ycp:697 msgid "Bissau" msgstr "비사우" -#. GW -#. time zone -#: timezone/src/data/timezone_raw.ycp:699 +#. GW +#. time zone +#: timezone/src/data/timezone_raw.ycp:699 msgid "Blantyre" msgstr "블랜타이어" -#. MW -#. time zone -#: timezone/src/data/timezone_raw.ycp:701 +#. MW +#. time zone +#: timezone/src/data/timezone_raw.ycp:701 msgid "Brazzaville" msgstr "브라자빌레" -#. time zone -#: timezone/src/data/timezone_raw.ycp:703 +#. time zone +#: timezone/src/data/timezone_raw.ycp:703 msgid "Bujumbura" msgstr "부줌부라" -#. BI -#. time zone -#: timezone/src/data/timezone_raw.ycp:705 +#. BI +#. time zone +#: timezone/src/data/timezone_raw.ycp:705 msgid "Cairo" msgstr "카이로" -#. time zone -#: timezone/src/data/timezone_raw.ycp:707 +#. time zone +#: timezone/src/data/timezone_raw.ycp:707 msgid "Casablanca" msgstr "카사블랑카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:709 +#. time zone +#: timezone/src/data/timezone_raw.ycp:709 msgid "Ceuta" msgstr "세우타" -#. time zone -#: timezone/src/data/timezone_raw.ycp:711 +#. time zone +#: timezone/src/data/timezone_raw.ycp:711 msgid "Conakry" msgstr "코나크리" -#. GN -#. time zone -#: timezone/src/data/timezone_raw.ycp:713 +#. GN +#. time zone +#: timezone/src/data/timezone_raw.ycp:713 msgid "Dakar" msgstr "다카르" -#. time zone -#: timezone/src/data/timezone_raw.ycp:715 +#. time zone +#: timezone/src/data/timezone_raw.ycp:715 msgid "Dar es Salaam" msgstr "달레살람" -#. time zone -#: timezone/src/data/timezone_raw.ycp:717 +#. time zone +#: timezone/src/data/timezone_raw.ycp:717 msgid "Djibouti" msgstr "디보우티" -#. time zone -#: timezone/src/data/timezone_raw.ycp:719 +#. time zone +#: timezone/src/data/timezone_raw.ycp:719 msgid "Douala" msgstr "두알라" -#. CM -#. time zone -#: timezone/src/data/timezone_raw.ycp:721 +#. CM +#. time zone +#: timezone/src/data/timezone_raw.ycp:721 msgid "El Aaiun" msgstr "엘아이운" -#. EH -#. time zone -#: timezone/src/data/timezone_raw.ycp:723 +#. EH +#. time zone +#: timezone/src/data/timezone_raw.ycp:723 msgid "Freetown" msgstr "프리타운" -#. time zone -#: timezone/src/data/timezone_raw.ycp:725 +#. time zone +#: timezone/src/data/timezone_raw.ycp:725 msgid "Gaborone" msgstr "가보로네" -#. BW -#. time zone -#: timezone/src/data/timezone_raw.ycp:727 +#. BW +#. time zone +#: timezone/src/data/timezone_raw.ycp:727 msgid "Harare" msgstr "하라레" -#. ZW -#. time zone -#: timezone/src/data/timezone_raw.ycp:729 +#. ZW +#. time zone +#: timezone/src/data/timezone_raw.ycp:729 msgid "Johannesburg" msgstr "요한네스버그" -#. time zone -#: timezone/src/data/timezone_raw.ycp:731 +#. time zone +#: timezone/src/data/timezone_raw.ycp:731 msgid "Kampala" msgstr "캄팔라" -#. time zone -#: timezone/src/data/timezone_raw.ycp:733 +#. time zone +#: timezone/src/data/timezone_raw.ycp:733 msgid "Khartoum" msgstr "카르툼" -#. time zone -#: timezone/src/data/timezone_raw.ycp:735 +#. time zone +#: timezone/src/data/timezone_raw.ycp:735 msgid "Kinshasa" msgstr "킨샤사" -#. time zone -#: timezone/src/data/timezone_raw.ycp:737 +#. time zone +#: timezone/src/data/timezone_raw.ycp:737 msgid "Kigali" msgstr "키갈리" -#. time zone -#: timezone/src/data/timezone_raw.ycp:739 +#. time zone +#: timezone/src/data/timezone_raw.ycp:739 msgid "Lagos" msgstr "라고스" -#. NG -#. time zone -#: timezone/src/data/timezone_raw.ycp:741 +#. NG +#. time zone +#: timezone/src/data/timezone_raw.ycp:741 msgid "Libreville" msgstr "리브르빌" -#. time zone -#: timezone/src/data/timezone_raw.ycp:743 +#. time zone +#: timezone/src/data/timezone_raw.ycp:743 msgid "Lome" msgstr "로메" -#. TG -#. time zone -#: timezone/src/data/timezone_raw.ycp:745 +#. TG +#. time zone +#: timezone/src/data/timezone_raw.ycp:745 msgid "Luanda" msgstr "루안다" -#. AO -#. time zone -#: timezone/src/data/timezone_raw.ycp:747 +#. AO +#. time zone +#: timezone/src/data/timezone_raw.ycp:747 msgid "Lubumbashi" msgstr "루붐바시" -#. CD -#. time zone -#: timezone/src/data/timezone_raw.ycp:749 +#. CD +#. time zone +#: timezone/src/data/timezone_raw.ycp:749 msgid "Lusaka" msgstr "루사카" -#. time zone -#: timezone/src/data/timezone_raw.ycp:751 +#. time zone +#: timezone/src/data/timezone_raw.ycp:751 msgid "Malabo" msgstr "말라보" -#. GQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:753 +#. GQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:753 msgid "Maputo" msgstr "마푸투" -#. time zone -#: timezone/src/data/timezone_raw.ycp:755 +#. time zone +#: timezone/src/data/timezone_raw.ycp:755 msgid "Maseru" msgstr "마세루" -#. LS -#. time zone -#: timezone/src/data/timezone_raw.ycp:757 +#. LS +#. time zone +#: timezone/src/data/timezone_raw.ycp:757 msgid "Mbabane" msgstr "음바바네" -#. SZ -#. time zone -#: timezone/src/data/timezone_raw.ycp:759 +#. SZ +#. time zone +#: timezone/src/data/timezone_raw.ycp:759 msgid "Mogadishu" msgstr "모가디슈" -#. time zone -#: timezone/src/data/timezone_raw.ycp:761 +#. time zone +#: timezone/src/data/timezone_raw.ycp:761 msgid "Monrovia" msgstr "몬로비아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:763 +#. time zone +#: timezone/src/data/timezone_raw.ycp:763 msgid "Nairobi" msgstr "나이로비" -#. time zone -#: timezone/src/data/timezone_raw.ycp:765 +#. time zone +#: timezone/src/data/timezone_raw.ycp:765 msgid "Ndjamena" msgstr "엔자메나" -#. TD -#. time zone -#: timezone/src/data/timezone_raw.ycp:767 +#. TD +#. time zone +#: timezone/src/data/timezone_raw.ycp:767 msgid "Niamey" msgstr "니아메" -#. NE -#. time zone -#: timezone/src/data/timezone_raw.ycp:769 +#. NE +#. time zone +#: timezone/src/data/timezone_raw.ycp:769 msgid "Nouakchott" msgstr "누악쇼트" -#. MR -#. time zone -#: timezone/src/data/timezone_raw.ycp:771 +#. MR +#. time zone +#: timezone/src/data/timezone_raw.ycp:771 msgid "Ouagadougou" msgstr "와가두구" -#. BF -#. time zone -#: timezone/src/data/timezone_raw.ycp:773 +#. BF +#. time zone +#: timezone/src/data/timezone_raw.ycp:773 msgid "Porto-Novo" msgstr "포르토노보" -#. BJ -#. time zone -#: timezone/src/data/timezone_raw.ycp:775 +#. BJ +#. time zone +#: timezone/src/data/timezone_raw.ycp:775 msgid "Sao Tome" msgstr "상투메" -#. ST -#. time zone -#: timezone/src/data/timezone_raw.ycp:777 +#. ST +#. time zone +#: timezone/src/data/timezone_raw.ycp:777 msgid "Tripoli" msgstr "트리폴리" -#. time zone -#: timezone/src/data/timezone_raw.ycp:779 +#. time zone +#: timezone/src/data/timezone_raw.ycp:779 msgid "Tunis" msgstr "투니스" -#. time zone -#: timezone/src/data/timezone_raw.ycp:781 +#. time zone +#: timezone/src/data/timezone_raw.ycp:781 msgid "Windhoek" msgstr "윈드헤크" -#. time zone -#: timezone/src/data/timezone_raw.ycp:784 +#. time zone +#: timezone/src/data/timezone_raw.ycp:784 msgid "Antananarivo" msgstr "안타나나리보" -#. Madagascar -#. time zone -#. MV -#. time zone -#: timezone/src/data/timezone_raw.ycp:786 -#: timezone/src/data/timezone_raw.ycp:932 +#. Madagascar +#. time zone +#. MV +#. time zone +#: timezone/src/data/timezone_raw.ycp:786 +#: timezone/src/data/timezone_raw.ycp:932 msgid "Reunion" msgstr "리유니언" -#. name of time zone region -#: timezone/src/data/timezone_raw.ycp:793 +#. name of time zone region +#: timezone/src/data/timezone_raw.ycp:793 msgid "Pacific" msgstr "태평양" -#. time zone -#: timezone/src/data/timezone_raw.ycp:796 +#. time zone +#: timezone/src/data/timezone_raw.ycp:796 msgid "New Zealand" msgstr "뉴질랜드" -#. time zone -#: timezone/src/data/timezone_raw.ycp:798 +#. time zone +#: timezone/src/data/timezone_raw.ycp:798 msgid "Fiji" msgstr "피지" -#. time zone -#: timezone/src/data/timezone_raw.ycp:800 +#. time zone +#: timezone/src/data/timezone_raw.ycp:800 msgid "Guadalcanal" msgstr "과달카날" -#. time zone -#: timezone/src/data/timezone_raw.ycp:802 +#. time zone +#: timezone/src/data/timezone_raw.ycp:802 msgid "Guam" msgstr "괌" -#. time zone -#: timezone/src/data/timezone_raw.ycp:804 +#. time zone +#: timezone/src/data/timezone_raw.ycp:804 msgid "Midway" msgstr "미드웨이제도" -#. time zone -#: timezone/src/data/timezone_raw.ycp:806 +#. time zone +#: timezone/src/data/timezone_raw.ycp:806 msgid "Nauru" msgstr "나우루" -#. time zone -#: timezone/src/data/timezone_raw.ycp:808 +#. time zone +#: timezone/src/data/timezone_raw.ycp:808 msgid "Palau" msgstr "파라과이" -#. time zone -#: timezone/src/data/timezone_raw.ycp:810 +#. time zone +#: timezone/src/data/timezone_raw.ycp:810 msgid "Pitcairn" msgstr "피트카이른" -#. time zone -#: timezone/src/data/timezone_raw.ycp:812 +#. time zone +#: timezone/src/data/timezone_raw.ycp:812 msgid "Tahiti" msgstr "타히티섬" -#. time zone -#: timezone/src/data/timezone_raw.ycp:814 +#. time zone +#: timezone/src/data/timezone_raw.ycp:814 msgid "Samoa" msgstr "사모아" -#. time zone -#: timezone/src/data/timezone_raw.ycp:816 +#. time zone +#: timezone/src/data/timezone_raw.ycp:816 msgid "Port_Moresby" msgstr "포트모레스비" -#. time zone -#: timezone/src/data/timezone_raw.ycp:818 +#. time zone +#: timezone/src/data/timezone_raw.ycp:818 msgid "Rarotonga" msgstr "라로통가" -#. CK -#. time zone -#: timezone/src/data/timezone_raw.ycp:820 +#. CK +#. time zone +#: timezone/src/data/timezone_raw.ycp:820 msgid "Chuuk" msgstr "추크" -#. FM -#. time zone -#: timezone/src/data/timezone_raw.ycp:822 +#. FM +#. time zone +#: timezone/src/data/timezone_raw.ycp:822 msgid "Pohnpei" msgstr "폰페이" -#. FM -#. time zone -#: timezone/src/data/timezone_raw.ycp:824 +#. FM +#. time zone +#: timezone/src/data/timezone_raw.ycp:824 msgid "Kosrae" msgstr "코스라이에" -#. FM -#. time zone -#: timezone/src/data/timezone_raw.ycp:826 +#. FM +#. time zone +#: timezone/src/data/timezone_raw.ycp:826 msgid "Tarawa" msgstr "타라와" -#. KI -#. time zone -#: timezone/src/data/timezone_raw.ycp:828 +#. KI +#. time zone +#: timezone/src/data/timezone_raw.ycp:828 msgid "Enderbury" msgstr "엔더베리" -#. KI -#. time zone -#: timezone/src/data/timezone_raw.ycp:830 +#. KI +#. time zone +#: timezone/src/data/timezone_raw.ycp:830 msgid "Kiritimati" msgstr "키리티마티" -#. KI -#. time zone -#: timezone/src/data/timezone_raw.ycp:832 +#. KI +#. time zone +#: timezone/src/data/timezone_raw.ycp:832 msgid "Majuro" msgstr "마주로" -#. MH -#. time zone -#: timezone/src/data/timezone_raw.ycp:834 +#. MH +#. time zone +#: timezone/src/data/timezone_raw.ycp:834 msgid "Kwajalein" msgstr "콰자레인" -#. MH -#. time zone -#: timezone/src/data/timezone_raw.ycp:836 +#. MH +#. time zone +#: timezone/src/data/timezone_raw.ycp:836 msgid "Saipan" msgstr "사이판" -#. MP -#. time zone -#: timezone/src/data/timezone_raw.ycp:838 +#. MP +#. time zone +#: timezone/src/data/timezone_raw.ycp:838 msgid "Noumea" msgstr "누메아" -#. NC -#. time zone -#: timezone/src/data/timezone_raw.ycp:840 +#. NC +#. time zone +#: timezone/src/data/timezone_raw.ycp:840 msgid "Norfolk" msgstr "노퍽" -#. NF -#. time zone -#: timezone/src/data/timezone_raw.ycp:842 +#. NF +#. time zone +#: timezone/src/data/timezone_raw.ycp:842 msgid "Niue" msgstr "니우에" -#. NU -#. time zone -#: timezone/src/data/timezone_raw.ycp:844 +#. NU +#. time zone +#: timezone/src/data/timezone_raw.ycp:844 msgid "Chatham" msgstr "채텀" -#. NZ -#. time zone -#: timezone/src/data/timezone_raw.ycp:846 +#. NZ +#. time zone +#: timezone/src/data/timezone_raw.ycp:846 msgid "Marquesas" msgstr "마키저스" -#. PF -#. time zone -#: timezone/src/data/timezone_raw.ycp:848 +#. PF +#. time zone +#: timezone/src/data/timezone_raw.ycp:848 msgid "Gambier" msgstr "갬비어" -#. PF -#. time zone -#: timezone/src/data/timezone_raw.ycp:850 +#. PF +#. time zone +#: timezone/src/data/timezone_raw.ycp:850 msgid "Fakaofo" msgstr "파카오포" -#. TK -#. time zone -#: timezone/src/data/timezone_raw.ycp:852 +#. TK +#. time zone +#: timezone/src/data/timezone_raw.ycp:852 msgid "Tongatapu" msgstr "통가타푸" -#. TO -#. time zone -#: timezone/src/data/timezone_raw.ycp:854 +#. TO +#. time zone +#: timezone/src/data/timezone_raw.ycp:854 msgid "Funafuti" msgstr "푸나푸티" -#. TV -#. time zone -#: timezone/src/data/timezone_raw.ycp:856 +#. TV +#. time zone +#: timezone/src/data/timezone_raw.ycp:856 msgid "Johnston" msgstr "존스톤" -#. UM -#. time zone -#: timezone/src/data/timezone_raw.ycp:858 +#. UM +#. time zone +#: timezone/src/data/timezone_raw.ycp:858 msgid "Wake" msgstr "웨이크" -#. UM -#. time zone -#: timezone/src/data/timezone_raw.ycp:860 +#. UM +#. time zone +#: timezone/src/data/timezone_raw.ycp:860 msgid "Efate" msgstr "테파테" -#. VU -#. time zone -#: timezone/src/data/timezone_raw.ycp:862 +#. VU +#. time zone +#: timezone/src/data/timezone_raw.ycp:862 msgid "Wallis" msgstr "윌리스" -#. WF -#. time zone -#: timezone/src/data/timezone_raw.ycp:864 +#. WF +#. time zone +#: timezone/src/data/timezone_raw.ycp:864 msgid "Apia" msgstr "아피아" -#. name of time zone region -#: timezone/src/data/timezone_raw.ycp:873 +#. name of time zone region +#: timezone/src/data/timezone_raw.ycp:873 msgid "Atlantic" msgstr "아틀란틱" -#. time zone -#: timezone/src/data/timezone_raw.ycp:876 +#. time zone +#: timezone/src/data/timezone_raw.ycp:876 msgid "Bermuda" msgstr "버뮤다" -#. Falklands -#. time zone -#: timezone/src/data/timezone_raw.ycp:886 +#. Falklands +#. time zone +#: timezone/src/data/timezone_raw.ycp:886 msgid "Cape Verde" msgstr "카보베르데" -#. CV -#. time zone -#: timezone/src/data/timezone_raw.ycp:888 +#. CV +#. time zone +#: timezone/src/data/timezone_raw.ycp:888 msgid "Faroe Islands" msgstr "파로에 아일랜드" -#. FO -#. time zone -#: timezone/src/data/timezone_raw.ycp:890 +#. FO +#. time zone +#: timezone/src/data/timezone_raw.ycp:890 msgid "South Georgia" msgstr "사우스조지아" -#. GS -#. time zone -#: timezone/src/data/timezone_raw.ycp:892 +#. GS +#. time zone +#: timezone/src/data/timezone_raw.ycp:892 msgid "Madeira" msgstr "마데이라" -#. PT -#. time zone -#: timezone/src/data/timezone_raw.ycp:894 +#. PT +#. time zone +#: timezone/src/data/timezone_raw.ycp:894 msgid "St Helena" msgstr "세인트헬레나" -#. SH -#. time zone -#: timezone/src/data/timezone_raw.ycp:896 +#. SH +#. time zone +#: timezone/src/data/timezone_raw.ycp:896 msgid "Jan Mayen" msgstr "얀마옌" -#. SJ -#. time zone -#: timezone/src/data/timezone_raw.ycp:899 -#: timezone/src/data/timezone_raw.ycp:951 +#. SJ +#. time zone +#: timezone/src/data/timezone_raw.ycp:899 +#: timezone/src/data/timezone_raw.ycp:951 msgid "Greenland (Nuuk)" msgstr "그린랜드(누크)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:901 -#: timezone/src/data/timezone_raw.ycp:953 +#. time zone +#: timezone/src/data/timezone_raw.ycp:901 +#: timezone/src/data/timezone_raw.ycp:953 msgid "Greenland (Danmarkshavn)" msgstr "그린랜드(덴마크 소유)" -#. GL -#. time zone -#: timezone/src/data/timezone_raw.ycp:903 -#: timezone/src/data/timezone_raw.ycp:955 +#. GL +#. time zone +#: timezone/src/data/timezone_raw.ycp:903 +#: timezone/src/data/timezone_raw.ycp:955 msgid "Greenland (Scoresbysund)" msgstr "그린랜드(스코즈비만)" -#. GL -#. time zone -#: timezone/src/data/timezone_raw.ycp:905 -#: timezone/src/data/timezone_raw.ycp:957 +#. GL +#. time zone +#: timezone/src/data/timezone_raw.ycp:905 +#: timezone/src/data/timezone_raw.ycp:957 msgid "Greenland (Thule)" msgstr "그린랜드(툴레)" -#. name of time zone region -#: timezone/src/data/timezone_raw.ycp:916 +#. name of time zone region +#: timezone/src/data/timezone_raw.ycp:916 msgid "Indian Ocean" msgstr "인도양" -#. time zone -#: timezone/src/data/timezone_raw.ycp:920 +#. time zone +#: timezone/src/data/timezone_raw.ycp:920 msgid "Cocos Islands" msgstr "코코스 제도" -#. time zone -#: timezone/src/data/timezone_raw.ycp:922 +#. time zone +#: timezone/src/data/timezone_raw.ycp:922 msgid "Christmas Island" msgstr "크리스마스 섬" -#. CX -#. time zone -#: timezone/src/data/timezone_raw.ycp:924 +#. CX +#. time zone +#: timezone/src/data/timezone_raw.ycp:924 msgid "Chagos" msgstr "차고스" -#. IO -#. time zone -#: timezone/src/data/timezone_raw.ycp:926 +#. IO +#. time zone +#: timezone/src/data/timezone_raw.ycp:926 msgid "Comoro" msgstr "코모로" -#. KM -#. time zone -#: timezone/src/data/timezone_raw.ycp:928 +#. KM +#. time zone +#: timezone/src/data/timezone_raw.ycp:928 msgid "Mauritius" msgstr "모리셔스" -#. MU -#. time zone -#: timezone/src/data/timezone_raw.ycp:930 +#. MU +#. time zone +#: timezone/src/data/timezone_raw.ycp:930 msgid "Maldives" msgstr "몰디브" -#. RE -#. time zone -#: timezone/src/data/timezone_raw.ycp:934 +#. RE +#. time zone +#: timezone/src/data/timezone_raw.ycp:934 msgid "Mahe" msgstr "마헤" -#. SC -#. time zone -#: timezone/src/data/timezone_raw.ycp:936 +#. SC +#. time zone +#: timezone/src/data/timezone_raw.ycp:936 msgid "Kerguelen" msgstr "케구엘렌" -#. TF -#. time zone -#: timezone/src/data/timezone_raw.ycp:938 +#. TF +#. time zone +#: timezone/src/data/timezone_raw.ycp:938 msgid "Mayotte" msgstr "마요트" -#. name of time zone region -#: timezone/src/data/timezone_raw.ycp:945 +#. name of time zone region +#: timezone/src/data/timezone_raw.ycp:945 msgid "Global" msgstr "전역" -#. time zone -#: timezone/src/data/timezone_raw.ycp:948 +#. time zone +#: timezone/src/data/timezone_raw.ycp:948 msgid "Arctic Longyearbyen" msgstr "아틱 롱이어빈" -#. GL -#. time zone -#: timezone/src/data/timezone_raw.ycp:960 +#. GL +#. time zone +#: timezone/src/data/timezone_raw.ycp:960 msgid "Antarctica (South Pole)" msgstr "남극(사우스폴)" -#. time zone -#: timezone/src/data/timezone_raw.ycp:962 +#. time zone +#: timezone/src/data/timezone_raw.ycp:962 msgid "Antarctica (McMurdo)" msgstr "남극(맥머도)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:964 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:964 msgid "Antarctica (Rothera)" msgstr "남극(로데라)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:966 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:966 msgid "Antarctica (Palmer)" msgstr "남극(팔머)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:968 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:968 msgid "Antarctica (Mawson)" msgstr "남극(모슨)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:970 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:970 msgid "Antarctica (Davis)" msgstr "남극(데이비스)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:972 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:972 msgid "Antarctica (Casey)" msgstr "남극(케이시)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:974 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:974 msgid "Antarctica (Vostok)" msgstr "남극(보스톡)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:976 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:976 msgid "Antarctica (DumontDUrville)" msgstr "남극(드몬두르빌)" -#. AQ -#. time zone -#: timezone/src/data/timezone_raw.ycp:978 +#. AQ +#. time zone +#: timezone/src/data/timezone_raw.ycp:978 msgid "Antarctica (Syowa)" msgstr "남극(소야)" -#. AQ -#: timezone/src/data/timezone_raw.ycp:980 +#. AQ +#: timezone/src/data/timezone_raw.ycp:980 msgid "CET" msgstr "CET" -#: timezone/src/data/timezone_raw.ycp:981 +#: timezone/src/data/timezone_raw.ycp:981 msgid "CST6CDT" msgstr "CST6CDT" -#: timezone/src/data/timezone_raw.ycp:982 +#: timezone/src/data/timezone_raw.ycp:982 msgid "EET" msgstr "EET" -#: timezone/src/data/timezone_raw.ycp:983 +#: timezone/src/data/timezone_raw.ycp:983 msgid "EST" msgstr "EST" -#: timezone/src/data/timezone_raw.ycp:984 +#: timezone/src/data/timezone_raw.ycp:984 msgid "EST5EDT" msgstr "EST5EDT" -#: timezone/src/data/timezone_raw.ycp:985 -#: timezone/src/data/timezone_raw.ycp:1036 +#: timezone/src/data/timezone_raw.ycp:985 +#: timezone/src/data/timezone_raw.ycp:1036 msgid "GMT" msgstr "GMT" -#: timezone/src/data/timezone_raw.ycp:986 -#: timezone/src/data/timezone_raw.ycp:1037 +#: timezone/src/data/timezone_raw.ycp:986 +#: timezone/src/data/timezone_raw.ycp:1037 msgid "GMT+0" msgstr "GMT+0" -#: timezone/src/data/timezone_raw.ycp:987 -#: timezone/src/data/timezone_raw.ycp:1038 +#: timezone/src/data/timezone_raw.ycp:987 +#: timezone/src/data/timezone_raw.ycp:1038 msgid "GMT-0" msgstr "GMT-0" -#: timezone/src/data/timezone_raw.ycp:988 -#: timezone/src/data/timezone_raw.ycp:1039 +#: timezone/src/data/timezone_raw.ycp:988 +#: timezone/src/data/timezone_raw.ycp:1039 msgid "GMT0" msgstr "GMT0" -#: timezone/src/data/timezone_raw.ycp:989 -#: timezone/src/data/timezone_raw.ycp:1040 +#: timezone/src/data/timezone_raw.ycp:989 +#: timezone/src/data/timezone_raw.ycp:1040 msgid "Greenwich" msgstr "그리니치" -#: timezone/src/data/timezone_raw.ycp:990 +#: timezone/src/data/timezone_raw.ycp:990 msgid "HST" msgstr "HST" -#: timezone/src/data/timezone_raw.ycp:991 +#: timezone/src/data/timezone_raw.ycp:991 msgid "MET" msgstr "MET" -#: timezone/src/data/timezone_raw.ycp:992 +#: timezone/src/data/timezone_raw.ycp:992 msgid "MST" msgstr "MST" -#: timezone/src/data/timezone_raw.ycp:993 +#: timezone/src/data/timezone_raw.ycp:993 msgid "MST7MDT" msgstr "MST7MDT" -#: timezone/src/data/timezone_raw.ycp:994 +#: timezone/src/data/timezone_raw.ycp:994 msgid "NZ" msgstr "NZ" -#: timezone/src/data/timezone_raw.ycp:995 +#: timezone/src/data/timezone_raw.ycp:995 msgid "NZ-CHAT" msgstr "NZ-CHAT" -#: timezone/src/data/timezone_raw.ycp:996 +#: timezone/src/data/timezone_raw.ycp:996 msgid "Navajo" msgstr "나바조" -#: timezone/src/data/timezone_raw.ycp:997 +#: timezone/src/data/timezone_raw.ycp:997 msgid "PST8PDT" msgstr "PST8PDT" -#: timezone/src/data/timezone_raw.ycp:998 -#: timezone/src/data/timezone_raw.ycp:1041 +#: timezone/src/data/timezone_raw.ycp:998 +#: timezone/src/data/timezone_raw.ycp:1041 msgid "UCT" msgstr "UCT" -#: timezone/src/data/timezone_raw.ycp:999 -#: timezone/src/data/timezone_raw.ycp:1042 +#: timezone/src/data/timezone_raw.ycp:999 +#: timezone/src/data/timezone_raw.ycp:1042 msgid "UTC" msgstr "UTC" -#: timezone/src/data/timezone_raw.ycp:1000 -#: timezone/src/data/timezone_raw.ycp:1043 +#: timezone/src/data/timezone_raw.ycp:1000 +#: timezone/src/data/timezone_raw.ycp:1043 msgid "Universal" msgstr "Univesal" -#: timezone/src/data/timezone_raw.ycp:1001 +#: timezone/src/data/timezone_raw.ycp:1001 msgid "W-SU" msgstr "W-SU" -#: timezone/src/data/timezone_raw.ycp:1002 +#: timezone/src/data/timezone_raw.ycp:1002 msgid "WET" msgstr "WET" -#: timezone/src/data/timezone_raw.ycp:1003 -#: timezone/src/data/timezone_raw.ycp:1044 +#: timezone/src/data/timezone_raw.ycp:1003 +#: timezone/src/data/timezone_raw.ycp:1044 msgid "Zulu" msgstr "줄루" -#: timezone/src/data/timezone_raw.ycp:1008 +#: timezone/src/data/timezone_raw.ycp:1008 msgid "Etc" msgstr "기타" -#: timezone/src/data/timezone_raw.ycp:1010 +#: timezone/src/data/timezone_raw.ycp:1010 msgid "GMT+1" msgstr "GMT+1" -#: timezone/src/data/timezone_raw.ycp:1011 +#: timezone/src/data/timezone_raw.ycp:1011 msgid "GMT+10" msgstr "GMT+10" -#: timezone/src/data/timezone_raw.ycp:1012 +#: timezone/src/data/timezone_raw.ycp:1012 msgid "GMT+11" msgstr "GMT+11" -#: timezone/src/data/timezone_raw.ycp:1013 +#: timezone/src/data/timezone_raw.ycp:1013 msgid "GMT+12" msgstr "GMT+12" -#: timezone/src/data/timezone_raw.ycp:1014 +#: timezone/src/data/timezone_raw.ycp:1014 msgid "GMT+2" msgstr "GMT+2" -#: timezone/src/data/timezone_raw.ycp:1015 +#: timezone/src/data/timezone_raw.ycp:1015 msgid "GMT+3" msgstr "GMT+3" -#: timezone/src/data/timezone_raw.ycp:1016 +#: timezone/src/data/timezone_raw.ycp:1016 msgid "GMT+4" msgstr "GMT+4" -#: timezone/src/data/timezone_raw.ycp:1017 +#: timezone/src/data/timezone_raw.ycp:1017 msgid "GMT+5" msgstr "GMT+5" -#: timezone/src/data/timezone_raw.ycp:1018 +#: timezone/src/data/timezone_raw.ycp:1018 msgid "GMT+6" msgstr "GMT+6" -#: timezone/src/data/timezone_raw.ycp:1019 +#: timezone/src/data/timezone_raw.ycp:1019 msgid "GMT+7" msgstr "GMT+7" -#: timezone/src/data/timezone_raw.ycp:1020 +#: timezone/src/data/timezone_raw.ycp:1020 msgid "GMT+8" msgstr "GMT+8" -#: timezone/src/data/timezone_raw.ycp:1021 +#: timezone/src/data/timezone_raw.ycp:1021 msgid "GMT+9" msgstr "GMT+9" -#: timezone/src/data/timezone_raw.ycp:1022 +#: timezone/src/data/timezone_raw.ycp:1022 msgid "GMT-1" msgstr "GMT-1" -#: timezone/src/data/timezone_raw.ycp:1023 +#: timezone/src/data/timezone_raw.ycp:1023 msgid "GMT-10" msgstr "GMT-10" -#: timezone/src/data/timezone_raw.ycp:1024 +#: timezone/src/data/timezone_raw.ycp:1024 msgid "GMT-11" msgstr "GMT-11" -#: timezone/src/data/timezone_raw.ycp:1025 +#: timezone/src/data/timezone_raw.ycp:1025 msgid "GMT-12" msgstr "GMT-12" -#: timezone/src/data/timezone_raw.ycp:1026 +#: timezone/src/data/timezone_raw.ycp:1026 msgid "GMT-13" msgstr "GMT-13" -#: timezone/src/data/timezone_raw.ycp:1027 +#: timezone/src/data/timezone_raw.ycp:1027 msgid "GMT-14" msgstr "GMT-14" -#: timezone/src/data/timezone_raw.ycp:1028 +#: timezone/src/data/timezone_raw.ycp:1028 msgid "GMT-2" msgstr "GMT-2" -#: timezone/src/data/timezone_raw.ycp:1029 +#: timezone/src/data/timezone_raw.ycp:1029 msgid "GMT-3" msgstr "GMT-3" -#: timezone/src/data/timezone_raw.ycp:1030 +#: timezone/src/data/timezone_raw.ycp:1030 msgid "GMT-4" msgstr "GMT-4" -#: timezone/src/data/timezone_raw.ycp:1031 +#: timezone/src/data/timezone_raw.ycp:1031 msgid "GMT-5" msgstr "GMT-5" -#: timezone/src/data/timezone_raw.ycp:1032 +#: timezone/src/data/timezone_raw.ycp:1032 msgid "GMT-6" msgstr "GMT-6" -#: timezone/src/data/timezone_raw.ycp:1033 +#: timezone/src/data/timezone_raw.ycp:1033 msgid "GMT-7" msgstr "GMT-7" -#: timezone/src/data/timezone_raw.ycp:1034 +#: timezone/src/data/timezone_raw.ycp:1034 msgid "GMT-8" msgstr "GMT-8" -#: timezone/src/data/timezone_raw.ycp:1035 +#: timezone/src/data/timezone_raw.ycp:1035 msgid "GMT-9" msgstr "GMT-9" Modified: branches/SLE12-SP3/yast/ko/po/tune.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/tune.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/tune.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,41 +14,37 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the hardware detection module, %1 is "hwinfo" -#: src/clients/hwinfo.rb:49 -msgid "" -"Hardware Detection - this module does not support the command line " -"interface, use '%1' instead." -msgstr "" -"하드웨어 감지 - 이 모듈은 명령줄 인터페이스를 지원하지 않습니다. '%1'을(를) " -"사용하십시오." +#. Command line help text for the hardware detection module, %1 is "hwinfo" +#: src/clients/hwinfo.rb:49 +msgid "Hardware Detection - this module does not support the command line interface, use '%1' instead." +msgstr "하드웨어 감지 - 이 모듈은 명령줄 인터페이스를 지원하지 않습니다. '%1'을(를) 사용하십시오." -#. translators: popup heading -#: src/clients/hwinfo.rb:73 +#. translators: popup heading +#: src/clients/hwinfo.rb:73 msgid "Probing Hardware..." msgstr "하드웨어 검색 중..." -#. progress bar label -#: src/clients/hwinfo.rb:76 +#. progress bar label +#: src/clients/hwinfo.rb:76 msgid "Progress" msgstr "진행률" -#. title label -#: src/clients/hwinfo.rb:311 +#. title label +#: src/clients/hwinfo.rb:311 msgid "&All Entries" msgstr "모든 항목(&A)" -#: src/clients/hwinfo.rb:323 +#: src/clients/hwinfo.rb:323 msgid "&Save to File..." msgstr "파일에 저장(&S)..." -#. dialog header -#: src/clients/hwinfo.rb:332 +#. dialog header +#: src/clients/hwinfo.rb:332 msgid "Hardware Information" msgstr "하드웨어 정보" -#. help text -#: src/clients/hwinfo.rb:335 +#. help text +#: src/clients/hwinfo.rb:335 msgid "" "<P>The <B>Hardware Information</B> module displays the hardware\n" "details of your computer. Click any node for more information.</p>\n" @@ -56,111 +52,95 @@ "<P> <B>하드웨어 정보</B>는 컴퓨터의 상세한 하드웨어 모듈을 표시합니다.\n" "좀더 자세한 정보를 원한다면 아무 노드나 클릭해 주십시오.</p>\n" -#: src/clients/hwinfo.rb:338 -msgid "" -"<P>You can save hardware information to a file. Click <B>Save to File</B> " -"and enter the filename.</P>" -msgstr "" -"<P>하드웨어 정보를 파일에 저장할 수 있습니다. <B>파일에 저장</B>을 클릭하고 " -"파일 이름을 입력하십시오.</P>" +#: src/clients/hwinfo.rb:338 +msgid "<P>You can save hardware information to a file. Click <B>Save to File</B> and enter the filename.</P>" +msgstr "<P>하드웨어 정보를 파일에 저장할 수 있습니다. <B>파일에 저장</B>을 클릭하고 파일 이름을 입력하십시오.</P>" -#. installation proposal header -#: src/clients/hwinfo_proposal.rb:31 +#. installation proposal header +#: src/clients/hwinfo_proposal.rb:31 msgid "System and Hardware Settings" msgstr "시스템 및 하드웨어 설정" -#. this is a heading -#. tree node string -#: src/clients/hwinfo_proposal.rb:50 src/include/hwinfo/routines.rb:471 +#. this is a heading +#. tree node string +#: src/clients/hwinfo_proposal.rb:50 src/include/hwinfo/routines.rb:471 msgid "System" msgstr "시스템" -#. this is a menu entry -#: src/clients/hwinfo_proposal.rb:52 +#. this is a menu entry +#: src/clients/hwinfo_proposal.rb:52 msgid "S&ystem" msgstr "시스템(&Y)" -#. tree widget label -#: src/clients/inst_hwinfo.rb:87 +#. tree widget label +#: src/clients/inst_hwinfo.rb:87 msgid "&Details" msgstr "자세히(&D)" -#. help text -#: src/clients/inst_hwinfo.rb:95 -msgid "" -"<P><B>Details</B></P><P>The details of the selected hardware component are " -"displayed here.</P>" -msgstr "" -"<P><B>세부 사항</B></P><P>여기에는 선택한 하드웨어 구성 요소에 대한 세부 정보" -"가 표시됩니다.</P>" +#. help text +#: src/clients/inst_hwinfo.rb:95 +msgid "<P><B>Details</B></P><P>The details of the selected hardware component are displayed here.</P>" +msgstr "<P><B>세부 사항</B></P><P>여기에는 선택한 하드웨어 구성 요소에 대한 세부 정보가 표시됩니다.</P>" -#. heading text, %1 is component name (e.g. "USB UHCI Root Hub") -#: src/clients/inst_hwinfo.rb:101 +#. heading text, %1 is component name (e.g. "USB UHCI Root Hub") +#: src/clients/inst_hwinfo.rb:101 msgid "Component '%1'" msgstr "'%1' 구성 요소" -#. device model name fallback -#. device model is unknown -#. device name (CPU model name string has key "name" instead of "model") -#. TODO allow setting of module args? -#. vendor is empty, device name is unknown -#: src/clients/inst_hwinfo.rb:143 src/clients/inst_hwinfo.rb:228 -#: src/modules/InitHWinfo.rb:280 src/modules/InitHWinfo.rb:281 -#: src/modules/NewID.rb:418 +#. device model name fallback +#. device model is unknown +#. device name (CPU model name string has key "name" instead of "model") +#. TODO allow setting of module args? +#. vendor is empty, device name is unknown +#: src/clients/inst_hwinfo.rb:143 src/clients/inst_hwinfo.rb:228 +#: src/modules/InitHWinfo.rb:280 src/modules/InitHWinfo.rb:281 +#: src/modules/NewID.rb:418 msgid "Unknown device" msgstr "알수 없는 장치" -#. device class is unknown -#: src/clients/inst_hwinfo.rb:154 +#. device class is unknown +#: src/clients/inst_hwinfo.rb:154 msgid "Unknown device class" msgstr "알 수 없는 장치 클래스" -#. table header -#. tree node string - means "class of hardware" -#: src/clients/inst_hwinfo.rb:166 src/include/hwinfo/newid.rb:373 -#: src/include/hwinfo/routines.rb:56 +#. table header +#. tree node string - means "class of hardware" +#: src/clients/inst_hwinfo.rb:166 src/include/hwinfo/newid.rb:373 +#: src/include/hwinfo/routines.rb:56 msgid "Class" msgstr "클래스" -#. tree node string - CPU information -#: src/clients/inst_hwinfo.rb:166 src/include/hwinfo/routines.rb:663 +#. tree node string - CPU information +#: src/clients/inst_hwinfo.rb:166 src/include/hwinfo/routines.rb:663 msgid "Model" msgstr "모델" -#. push button label -#: src/clients/inst_hwinfo.rb:170 +#. push button label +#: src/clients/inst_hwinfo.rb:170 msgid "&Kernel Settings..." msgstr "커널 설정(&K)..." -#. push button label -#: src/clients/inst_hwinfo.rb:173 +#. push button label +#: src/clients/inst_hwinfo.rb:173 msgid "&Details..." msgstr "세부 사항(&D)..." -#: src/clients/inst_hwinfo.rb:174 +#: src/clients/inst_hwinfo.rb:174 msgid "Save to &File..." msgstr "파일에 저장(&F)..." -#. help text - part 1/3 -#: src/clients/inst_hwinfo.rb:180 -msgid "" -"<P><B>Detected Hardware</B><BR>This table contains all hardware components " -"detected in your system.</P>" -msgstr "" -"<P><B>검색된 하드웨어</B><BR>이 테이블에는 시스템에서 검색된 모든 하드웨어 구" -"성 요소가 표시됩니다.</P>" +#. help text - part 1/3 +#: src/clients/inst_hwinfo.rb:180 +msgid "<P><B>Detected Hardware</B><BR>This table contains all hardware components detected in your system.</P>" +msgstr "<P><B>검색된 하드웨어</B><BR>이 테이블에는 시스템에서 검색된 모든 하드웨어 구성 요소가 표시됩니다.</P>" -#. help text - part 2/3 -#: src/clients/inst_hwinfo.rb:184 -msgid "" -"<P><B>Details</B><BR>Select a component and press <B>Details</B> to see a " -"more detailed description of the component.</P>" -msgstr "" -"<P><B>세부 사항</B><BR>구성 요소를 선택하고 <B>세부 사항</B>을 누르면 구성 요" -"소에 대한 좀 더 자세한 설명을 볼 수 있습니다.</P>" +#. help text - part 2/3 +#: src/clients/inst_hwinfo.rb:184 +msgid "<P><B>Details</B><BR>Select a component and press <B>Details</B> to see a more detailed description of the component.</P>" +msgstr "<P><B>세부 사항</B><BR>구성 요소를 선택하고 <B>세부 사항</B>을 누르면 구성 요소에 대한 좀 더 자세한 설명을 볼 수 있습니다.</P>" -#. help text - part 3/3 -#: src/clients/inst_hwinfo.rb:188 +#. help text - part 3/3 +#: src/clients/inst_hwinfo.rb:188 msgid "" "<P><B>Save to File</B><BR>You can save\n" " hardware information (<I>hwinfo</I> output) to a file.</P>" @@ -168,962 +148,933 @@ "<P><B>파일에 저장</B><BR>하드웨어 정보\n" " (<I>hwinfo</I> 출력)를 파일에 저장할 수 있습니다.</P>" -#. heading text -#: src/clients/inst_hwinfo.rb:197 +#. heading text +#: src/clients/inst_hwinfo.rb:197 msgid "Detected Hardware" msgstr "검색된 하드웨어" -#. progress step title -#: src/clients/system_settings_finish.rb:45 +#. progress step title +#: src/clients/system_settings_finish.rb:45 msgid "Saving system settings..." msgstr "시스템 설정 저장하는 중..." -#. text in dialog header -#. text in dialog header -#. dialog header -#: src/include/hwinfo/newid.rb:95 src/include/hwinfo/newid.rb:262 -#: src/include/hwinfo/newid.rb:439 +#. text in dialog header +#. text in dialog header +#. dialog header +#: src/include/hwinfo/newid.rb:95 src/include/hwinfo/newid.rb:262 +#: src/include/hwinfo/newid.rb:439 msgid "PCI ID Setup" msgstr "PCI ID 설정" -#. textentry label -#. textentry label -#: src/include/hwinfo/newid.rb:103 src/include/hwinfo/newid.rb:269 +#. textentry label +#. textentry label +#: src/include/hwinfo/newid.rb:103 src/include/hwinfo/newid.rb:269 msgid "&Driver" msgstr "드라이버(&D)" -#. textentry label -#: src/include/hwinfo/newid.rb:110 +#. textentry label +#: src/include/hwinfo/newid.rb:110 msgid "&Vendor" msgstr "제조업체(&V)" -#. textentry label -#: src/include/hwinfo/newid.rb:117 +#. textentry label +#: src/include/hwinfo/newid.rb:117 msgid "&Subvendor" msgstr "하위 제조업체(&S)" -#. textentry label -#: src/include/hwinfo/newid.rb:124 +#. textentry label +#: src/include/hwinfo/newid.rb:124 msgid "&Class" msgstr "클래스(&C)" -#. textentry label -#. textentry label -#: src/include/hwinfo/newid.rb:133 src/include/hwinfo/newid.rb:276 +#. textentry label +#. textentry label +#: src/include/hwinfo/newid.rb:133 src/include/hwinfo/newid.rb:276 msgid "Sys&FS Directory" msgstr "SysFS 디렉토리(&F)" -#. textentry label -#: src/include/hwinfo/newid.rb:140 +#. textentry label +#: src/include/hwinfo/newid.rb:140 msgid "&Device" msgstr "장치(&D)" -#. textentry label -#: src/include/hwinfo/newid.rb:147 +#. textentry label +#: src/include/hwinfo/newid.rb:147 msgid "S&ubdevice" msgstr "하위 장치(&U)" -#. textentry label -#: src/include/hwinfo/newid.rb:154 +#. textentry label +#: src/include/hwinfo/newid.rb:154 msgid "Class &Mask" msgstr "클래스 마스크(&M)" -#. error message, driver name and sysfs directory are empty. one is needed -#. error message, driver name and sysfs directory are empty -#: src/include/hwinfo/newid.rb:197 src/include/hwinfo/newid.rb:314 +#. error message, driver name and sysfs directory are empty. one is needed +#. error message, driver name and sysfs directory are empty +#: src/include/hwinfo/newid.rb:197 src/include/hwinfo/newid.rb:314 msgid "Enter the driver or SysFS directory name." msgstr "드라이버 또는 SysFS 디렉토리 이름을 입력하십시오." -#. error message, user didn't fill any PCI ID value -#: src/include/hwinfo/newid.rb:204 +#. error message, user didn't fill any PCI ID value +#: src/include/hwinfo/newid.rb:204 msgid "At least one PCI ID value is required." msgstr "PCI ID 값이 적어도 하나는 필요합니다." -#: src/include/hwinfo/newid.rb:286 +#: src/include/hwinfo/newid.rb:286 msgid "PCI &Device" msgstr "PCI 장치(&D)" -#. table header, use as short texts as possible -#. tree node string - means "hardware driver" -#: src/include/hwinfo/newid.rb:366 src/include/hwinfo/routines.rb:96 +#. table header, use as short texts as possible +#. tree node string - means "hardware driver" +#: src/include/hwinfo/newid.rb:366 src/include/hwinfo/routines.rb:96 msgid "Driver" msgstr "드라이버" -#: src/include/hwinfo/newid.rb:367 +#: src/include/hwinfo/newid.rb:367 msgid "Card Name" msgstr "카드 이름" -#. tree node string -#: src/include/hwinfo/newid.rb:368 src/include/hwinfo/routines.rb:336 +#. tree node string +#: src/include/hwinfo/newid.rb:368 src/include/hwinfo/routines.rb:336 msgid "Vendor" msgstr "제조업체" -#. tree node string -#: src/include/hwinfo/newid.rb:369 src/include/hwinfo/routines.rb:81 +#. tree node string +#: src/include/hwinfo/newid.rb:369 src/include/hwinfo/routines.rb:81 msgid "Device" msgstr "장치" -#. table header, use as short texts as possible -#. tree node string -#: src/include/hwinfo/newid.rb:371 src/include/hwinfo/routines.rb:321 +#. table header, use as short texts as possible +#. tree node string +#: src/include/hwinfo/newid.rb:371 src/include/hwinfo/routines.rb:321 msgid "Subvendor" msgstr "하위 제조업체" -#: src/include/hwinfo/newid.rb:372 +#: src/include/hwinfo/newid.rb:372 msgid "Subdevice" msgstr "하위 장치" -#: src/include/hwinfo/newid.rb:374 +#: src/include/hwinfo/newid.rb:374 msgid "Class Mask" msgstr "클래스 마스크" -#: src/include/hwinfo/newid.rb:375 +#: src/include/hwinfo/newid.rb:375 msgid "SysFS Dir." msgstr "SysFS 디렉토리" -#: src/include/hwinfo/newid.rb:383 +#: src/include/hwinfo/newid.rb:383 msgid "&From List" msgstr "목록에서(&F)" -#: src/include/hwinfo/newid.rb:384 +#: src/include/hwinfo/newid.rb:384 msgid "&Manually" msgstr "수동으로(&M)" -#. help text header -#: src/include/hwinfo/newid.rb:409 +#. help text header +#: src/include/hwinfo/newid.rb:409 msgid "<P><B>PCI ID Setup</B><BR></P>" msgstr "<P><B>PCI ID 설정</B><BR></P>" -#. PCI ID help text -#: src/include/hwinfo/newid.rb:411 -msgid "" -"<P>It is possible to add a PCI ID to a device driver to extend its internal " -"database of known supported devices.</P>" -msgstr "" -"<P>지원되는 알려진 장치의 내부 데이터베이스를 확장하기 위해 PCI ID를 장치 드" -"라이버에 추가할 수 있습니다.</P>" +#. PCI ID help text +#: src/include/hwinfo/newid.rb:411 +msgid "<P>It is possible to add a PCI ID to a device driver to extend its internal database of known supported devices.</P>" +msgstr "<P>지원되는 알려진 장치의 내부 데이터베이스를 확장하기 위해 PCI ID를 장치 드라이버에 추가할 수 있습니다.</P>" -#. PCI ID help text -#: src/include/hwinfo/newid.rb:415 -msgid "" -"<P>PCI ID numbers are entered and displayed as hexadecimal numbers. <b>SysFS " -"Dir.</b> is the directory name in the /sys/bus/pci/drivers directory. If it " -"is empty, the driver name is used as the directory name.</P>" -msgstr "" -"<P>PCI ID 번호가 입력되어 16진수로 표시됩니다. <b>SysFS 디렉토리</b>는 /sys/" -"bus/pci/drivers 디렉토리의 디렉토리 이름입니다. 이 항목이 비어 있으면 드라이" -"버 이름이 디렉토리 이름으로 사용됩니다.</P>" +#. PCI ID help text +#: src/include/hwinfo/newid.rb:415 +msgid "<P>PCI ID numbers are entered and displayed as hexadecimal numbers. <b>SysFS Dir.</b> is the directory name in the /sys/bus/pci/drivers directory. If it is empty, the driver name is used as the directory name.</P>" +msgstr "<P>PCI ID 번호가 입력되어 16진수로 표시됩니다. <b>SysFS 디렉토리</b>는 /sys/bus/pci/drivers 디렉토리의 디렉토리 이름입니다. 이 항목이 비어 있으면 드라이버 이름이 디렉토리 이름으로 사용됩니다.</P>" -#. PCI ID help text -#: src/include/hwinfo/newid.rb:419 -msgid "" -"<P>If the driver is compiled into the kernel, leave the driver name empty " -"and enter the SysFS directory name instead.</P>" -msgstr "" -"<P>드라이버가 커널로 컴파일된 경우 드라이버 이름을 비워 두고 대신 SysFS 디렉" -"토리 이름을 입력하십시오.</P>" +#. PCI ID help text +#: src/include/hwinfo/newid.rb:419 +msgid "<P>If the driver is compiled into the kernel, leave the driver name empty and enter the SysFS directory name instead.</P>" +msgstr "<P>드라이버가 커널로 컴파일된 경우 드라이버 이름을 비워 두고 대신 SysFS 디렉토리 이름을 입력하십시오.</P>" -#. PCI ID help text, %1 stands for a button name (OK or Finish -- depends on the situation) -#: src/include/hwinfo/newid.rb:424 -msgid "" -"<P>Use the buttons below the table to change the list of PCI IDs. Press <b>" -"%1</b> to activate the settings.</P>" -msgstr "" -"<P>PCI ID 목록을 변경하려면 테이블 아래 버튼을 사용하십시오. 설정을 활성화하" -"려면 <b>%1</b>을(를) 누르십시오.</P>" +#. PCI ID help text, %1 stands for a button name (OK or Finish -- depends on the situation) +#: src/include/hwinfo/newid.rb:424 +msgid "<P>Use the buttons below the table to change the list of PCI IDs. Press <b>%1</b> to activate the settings.</P>" +msgstr "<P>PCI ID 목록을 변경하려면 테이블 아래 버튼을 사용하십시오. 설정을 활성화하려면 <b>%1</b>을(를) 누르십시오.</P>" -#. PCI ID help text -#: src/include/hwinfo/newid.rb:431 -msgid "" -"<P><B>Warning:</B> This is an expert configuration. Only continue if you " -"know what you are doing.</P>" -msgstr "" -"<P><B>경고:</B> 이것은 고급 구성입니다. 작업 내용을 정확히 아는 경우에만 계속" -"하십시오.</P>" +#. PCI ID help text +#: src/include/hwinfo/newid.rb:431 +msgid "<P><B>Warning:</B> This is an expert configuration. Only continue if you know what you are doing.</P>" +msgstr "<P><B>경고:</B> 이것은 고급 구성입니다. 작업 내용을 정확히 아는 경우에만 계속하십시오.</P>" -#. tree node string -#: src/include/hwinfo/routines.rb:26 +#. tree node string +#: src/include/hwinfo/routines.rb:26 msgid "Architecture" msgstr "아키텍처" -#. tree node string - means "hardware bus" -#: src/include/hwinfo/routines.rb:31 +#. tree node string - means "hardware bus" +#: src/include/hwinfo/routines.rb:31 msgid "Bus" msgstr "버스" -#. tree node string - means "hardware bus ID" -#: src/include/hwinfo/routines.rb:36 +#. tree node string - means "hardware bus ID" +#: src/include/hwinfo/routines.rb:36 msgid "Bus ID" msgstr "버스 ID" -#. tree node string -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:41 src/include/hwinfo/routines.rb:593 +#. tree node string +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:41 src/include/hwinfo/routines.rb:593 msgid "Cache" msgstr "캐쉬" -#. tree node string -#. tree node string -#: src/include/hwinfo/routines.rb:46 src/include/hwinfo/routines.rb:51 +#. tree node string +#. tree node string +#: src/include/hwinfo/routines.rb:46 src/include/hwinfo/routines.rb:51 msgid "Card Type" msgstr "카드 형식" -#. tree node string -#: src/include/hwinfo/routines.rb:61 +#. tree node string +#: src/include/hwinfo/routines.rb:61 msgid "CD Type" msgstr "CD 형식" -#. tree node string -#: src/include/hwinfo/routines.rb:66 +#. tree node string +#: src/include/hwinfo/routines.rb:66 msgid "Device Name" msgstr "장치 이름" -#. tree node string -#: src/include/hwinfo/routines.rb:71 +#. tree node string +#: src/include/hwinfo/routines.rb:71 msgid "Device Numbers" msgstr "장치 번호" -#. tree node string -#. tree node string -#: src/include/hwinfo/routines.rb:76 src/include/hwinfo/routines.rb:221 +#. tree node string +#. tree node string +#: src/include/hwinfo/routines.rb:76 src/include/hwinfo/routines.rb:221 msgid "Sysfs ID" msgstr "Sysfs ID" -#. tree node string -#: src/include/hwinfo/routines.rb:86 +#. tree node string +#: src/include/hwinfo/routines.rb:86 msgid "Device Identifier" msgstr "장치 식별자" -#. tree node string - means "hardware drivers" -#: src/include/hwinfo/routines.rb:91 +#. tree node string - means "hardware drivers" +#: src/include/hwinfo/routines.rb:91 msgid "Drivers" msgstr "드라이버" -#. tree node string -#: src/include/hwinfo/routines.rb:101 +#. tree node string +#: src/include/hwinfo/routines.rb:101 msgid "Type" msgstr "유형" -#. tree node string -#: src/include/hwinfo/routines.rb:106 +#. tree node string +#: src/include/hwinfo/routines.rb:106 msgid "Major" msgstr "주" -#. tree node string -#: src/include/hwinfo/routines.rb:111 +#. tree node string +#: src/include/hwinfo/routines.rb:111 msgid "Minor" msgstr "부" -#. tree node string -#: src/include/hwinfo/routines.rb:116 +#. tree node string +#: src/include/hwinfo/routines.rb:116 msgid "Range" msgstr "범위" -#. tree node string (System Management BIOS) -#: src/include/hwinfo/routines.rb:121 +#. tree node string (System Management BIOS) +#: src/include/hwinfo/routines.rb:121 msgid "SMBIOS" msgstr "SMBIOS" -#. tree node string -#: src/include/hwinfo/routines.rb:126 +#. tree node string +#: src/include/hwinfo/routines.rb:126 msgid "Interface" msgstr "인터페이스" -#. tree node string -#: src/include/hwinfo/routines.rb:131 +#. tree node string +#: src/include/hwinfo/routines.rb:131 msgid "Resources" msgstr "리소스" -#. tree node string -#: src/include/hwinfo/routines.rb:136 +#. tree node string +#: src/include/hwinfo/routines.rb:136 msgid "Requires" msgstr "필수" -#. tree node string -#: src/include/hwinfo/routines.rb:141 +#. tree node string +#: src/include/hwinfo/routines.rb:141 msgid "Revision" msgstr "리비전" -#. tree node string - location of hardware in the machine -#: src/include/hwinfo/routines.rb:146 +#. tree node string - location of hardware in the machine +#: src/include/hwinfo/routines.rb:146 msgid "Slot ID" msgstr "슬롯 ID" -#. tree node string -#: src/include/hwinfo/routines.rb:151 +#. tree node string +#: src/include/hwinfo/routines.rb:151 msgid "Length" msgstr "길이" -#. tree node string -#: src/include/hwinfo/routines.rb:156 +#. tree node string +#: src/include/hwinfo/routines.rb:156 msgid "Width" msgstr "너비" -#. tree node string -#: src/include/hwinfo/routines.rb:161 +#. tree node string +#: src/include/hwinfo/routines.rb:161 msgid "Height" msgstr "높이" -#. tree node string -#: src/include/hwinfo/routines.rb:166 +#. tree node string +#: src/include/hwinfo/routines.rb:166 msgid "Active" msgstr "활성" -#. tree node string -#: src/include/hwinfo/routines.rb:171 +#. tree node string +#: src/include/hwinfo/routines.rb:171 msgid "Device Names" msgstr "장치 이름" -#. tree node string (number of colors) -#: src/include/hwinfo/routines.rb:176 +#. tree node string (number of colors) +#: src/include/hwinfo/routines.rb:176 msgid "Colors" msgstr "색상" -#. tree node string (harddisk parameter) -#: src/include/hwinfo/routines.rb:181 +#. tree node string (harddisk parameter) +#: src/include/hwinfo/routines.rb:181 msgid "Logical Geometry" msgstr "논리 지오메트리" -#. tree node string -#: src/include/hwinfo/routines.rb:186 +#. tree node string +#: src/include/hwinfo/routines.rb:186 msgid "Count" msgstr "개수" -#. tree node string -#: src/include/hwinfo/routines.rb:191 +#. tree node string +#: src/include/hwinfo/routines.rb:191 msgid "Mode" msgstr "모드" -#. tree node string (interrupt request) -#: src/include/hwinfo/routines.rb:196 +#. tree node string (interrupt request) +#: src/include/hwinfo/routines.rb:196 msgid "IRQ" msgstr "IRQ" -#. tree node string -#: src/include/hwinfo/routines.rb:201 +#. tree node string +#: src/include/hwinfo/routines.rb:201 msgid "IO Port" msgstr "IO 포트" -#. tree node string -#. tree node string - memory (RAM) information -#: src/include/hwinfo/routines.rb:206 src/include/hwinfo/routines.rb:496 +#. tree node string +#. tree node string - memory (RAM) information +#: src/include/hwinfo/routines.rb:206 src/include/hwinfo/routines.rb:496 msgid "Memory" msgstr "메모리" -#. tree node string (direct memory access) -#: src/include/hwinfo/routines.rb:211 +#. tree node string (direct memory access) +#: src/include/hwinfo/routines.rb:211 msgid "DMA" msgstr "DMA" -#. tree node string -#: src/include/hwinfo/routines.rb:216 +#. tree node string +#: src/include/hwinfo/routines.rb:216 msgid "Hwcfg Bus" msgstr "하드웨어 구성 버스" -#. tree node string -#: src/include/hwinfo/routines.rb:226 +#. tree node string +#: src/include/hwinfo/routines.rb:226 msgid "Parent Unique ID" msgstr "기본 고유 ID" -#. tree node string -#: src/include/hwinfo/routines.rb:231 +#. tree node string +#: src/include/hwinfo/routines.rb:231 msgid "UDI" msgstr "UDI" -#. tree node string -#: src/include/hwinfo/routines.rb:236 +#. tree node string +#: src/include/hwinfo/routines.rb:236 msgid "Unique ID" msgstr "고유 ID" -#. tree node string (monitor parameter) -#: src/include/hwinfo/routines.rb:241 +#. tree node string (monitor parameter) +#: src/include/hwinfo/routines.rb:241 msgid "Vertical Frequency" msgstr "수직 주파수" -#. tree node string (monitor parameter) -#: src/include/hwinfo/routines.rb:246 +#. tree node string (monitor parameter) +#: src/include/hwinfo/routines.rb:246 msgid "Max. Horizontal Frequency" msgstr "최대 수평 주파수" -#. tree node string (monitor parameter) -#: src/include/hwinfo/routines.rb:251 +#. tree node string (monitor parameter) +#: src/include/hwinfo/routines.rb:251 msgid "Max. Vertical Frequency" msgstr "최대 수직 주파수" -#. tree node string (monitor parameter) -#: src/include/hwinfo/routines.rb:256 +#. tree node string (monitor parameter) +#: src/include/hwinfo/routines.rb:256 msgid "Min. Horizontal Frequency" msgstr "최소 수평 주파수" -#. tree node string (monitor parameter) -#: src/include/hwinfo/routines.rb:261 +#. tree node string (monitor parameter) +#: src/include/hwinfo/routines.rb:261 msgid "Min. Vertical Frequency" msgstr "최소 수직 주파수" -#. tree node string -#: src/include/hwinfo/routines.rb:266 +#. tree node string +#: src/include/hwinfo/routines.rb:266 msgid "DVD" msgstr "DVD" -#. tree node string -#: src/include/hwinfo/routines.rb:271 +#. tree node string +#: src/include/hwinfo/routines.rb:271 msgid "Kernel Driver" msgstr "커널 드라이버" -#. tree node string -#: src/include/hwinfo/routines.rb:276 +#. tree node string +#: src/include/hwinfo/routines.rb:276 msgid "HW Address" msgstr "하드웨어 주소" -#. tree node string -#: src/include/hwinfo/routines.rb:281 +#. tree node string +#: src/include/hwinfo/routines.rb:281 msgid "BIOS ID" msgstr "BIOS ID" -#. tree node string -#: src/include/hwinfo/routines.rb:286 +#. tree node string +#: src/include/hwinfo/routines.rb:286 msgid "Enabled" msgstr "활성화됨" -#. tree node string (monitor resolution e.g. 1280x1024) -#: src/include/hwinfo/routines.rb:291 +#. tree node string (monitor resolution e.g. 1280x1024) +#: src/include/hwinfo/routines.rb:291 msgid "Resolution" msgstr "해상도" -#. tree node string -#: src/include/hwinfo/routines.rb:296 +#. tree node string +#: src/include/hwinfo/routines.rb:296 msgid "Size" msgstr "크기" -#. tree node string -#: src/include/hwinfo/routines.rb:301 +#. tree node string +#: src/include/hwinfo/routines.rb:301 msgid "Old Unique Key" msgstr "이전 고유 키" -#. tree node string -#: src/include/hwinfo/routines.rb:306 +#. tree node string +#: src/include/hwinfo/routines.rb:306 msgid "Class (spec)" msgstr "클래스 (사양)" -#. tree node string -#: src/include/hwinfo/routines.rb:311 +#. tree node string +#: src/include/hwinfo/routines.rb:311 msgid "Device (spec)" msgstr "장치명 (사양)" -#. tree node string -#: src/include/hwinfo/routines.rb:316 +#. tree node string +#: src/include/hwinfo/routines.rb:316 msgid "Device Identifier (spec)" msgstr "장치 식별자(사양)" -#. tree node string -#: src/include/hwinfo/routines.rb:326 +#. tree node string +#: src/include/hwinfo/routines.rb:326 msgid "Subvendor Identifier" msgstr "하위 제조업체 식별자" -#. tree node string -#: src/include/hwinfo/routines.rb:331 +#. tree node string +#: src/include/hwinfo/routines.rb:331 msgid "Unique Key" msgstr "고유 키" -#. tree node string -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:341 src/include/hwinfo/routines.rb:653 +#. tree node string +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:341 src/include/hwinfo/routines.rb:653 msgid "Vendor Identifier" msgstr "제조업체 식별자" -#. tree node string -#: src/include/hwinfo/routines.rb:346 +#. tree node string +#: src/include/hwinfo/routines.rb:346 msgid "BIOS Video" msgstr "바이오스 비디오" -#. tree node string -#: src/include/hwinfo/routines.rb:351 +#. tree node string +#: src/include/hwinfo/routines.rb:351 msgid "Boot Architecture" msgstr "부트 아키텍처" -#. tree node string -#: src/include/hwinfo/routines.rb:356 +#. tree node string +#: src/include/hwinfo/routines.rb:356 msgid "Boot Disk" msgstr "부트 디스크" -#. tree node string -#: src/include/hwinfo/routines.rb:361 +#. tree node string +#: src/include/hwinfo/routines.rb:361 msgid "Block Devices" msgstr "블록 장치" -#. tree node string -#: src/include/hwinfo/routines.rb:366 +#. tree node string +#: src/include/hwinfo/routines.rb:366 msgid "DASD Disks" msgstr "DASD 디스크" -#. tree node string -#: src/include/hwinfo/routines.rb:371 +#. tree node string +#: src/include/hwinfo/routines.rb:371 msgid "CD-ROM" msgstr "CD-ROM" -#. tree node string -#: src/include/hwinfo/routines.rb:376 +#. tree node string +#: src/include/hwinfo/routines.rb:376 msgid "CPU" msgstr "CPU" -#. tree node string -#: src/include/hwinfo/routines.rb:381 +#. tree node string +#: src/include/hwinfo/routines.rb:381 msgid "Disk" msgstr "디스크" -#. tree node string -#: src/include/hwinfo/routines.rb:386 +#. tree node string +#: src/include/hwinfo/routines.rb:386 msgid "Display" msgstr "디스플레이" -#. tree node string -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:391 src/include/hwinfo/routines.rb:713 +#. tree node string +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:391 src/include/hwinfo/routines.rb:713 msgid "Floppy Disk" msgstr "플로피 디스크" -#. tree node string -#: src/include/hwinfo/routines.rb:396 +#. tree node string +#: src/include/hwinfo/routines.rb:396 msgid "Framebuffer" msgstr "프레임버퍼" -#. tree node string (powermanagement) -#: src/include/hwinfo/routines.rb:401 +#. tree node string (powermanagement) +#: src/include/hwinfo/routines.rb:401 msgid "Has APM" msgstr "APM 유무" -#. tree node string -#: src/include/hwinfo/routines.rb:406 +#. tree node string +#: src/include/hwinfo/routines.rb:406 msgid "Has PCMCIA" msgstr "PCMCIA 유무" -#. tree node string (multiprocessing) -#: src/include/hwinfo/routines.rb:411 +#. tree node string (multiprocessing) +#: src/include/hwinfo/routines.rb:411 msgid "Has SMP" msgstr "SMP(다중 프로세서) 유무" -#. tree node string - UML = User Mode Linux -#: src/include/hwinfo/routines.rb:416 +#. tree node string - UML = User Mode Linux +#: src/include/hwinfo/routines.rb:416 msgid "UML System" msgstr "UML 시스템" -#. tree node string -#: src/include/hwinfo/routines.rb:421 +#. tree node string +#: src/include/hwinfo/routines.rb:421 msgid "Hardware Data" msgstr "하드웨어 데이터" -#. tree node string -#: src/include/hwinfo/routines.rb:426 +#. tree node string +#: src/include/hwinfo/routines.rb:426 msgid "ISDN" msgstr "ISDN" -#. tree node string -#: src/include/hwinfo/routines.rb:431 +#. tree node string +#: src/include/hwinfo/routines.rb:431 msgid "Keyboard" msgstr "키보드" -#. tree node string -#: src/include/hwinfo/routines.rb:436 +#. tree node string +#: src/include/hwinfo/routines.rb:436 msgid "Monitor" msgstr "모니터" -#. tree node string -#: src/include/hwinfo/routines.rb:441 +#. tree node string +#: src/include/hwinfo/routines.rb:441 msgid "Network Devices" msgstr "네트워크 장치" -#. tree node string -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:446 src/include/hwinfo/routines.rb:698 +#. tree node string +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:446 src/include/hwinfo/routines.rb:698 msgid "Network Interface" msgstr "네트워크 인터페이스" -#. tree node string -#: src/include/hwinfo/routines.rb:451 +#. tree node string +#: src/include/hwinfo/routines.rb:451 msgid "Printer" msgstr "프린터" -#. tree node string -#: src/include/hwinfo/routines.rb:456 +#. tree node string +#: src/include/hwinfo/routines.rb:456 msgid "Modem" msgstr "모뎀" -#. tree node string -#: src/include/hwinfo/routines.rb:461 +#. tree node string +#: src/include/hwinfo/routines.rb:461 msgid "Sound" msgstr "사운드" -#. tree node string -#: src/include/hwinfo/routines.rb:466 +#. tree node string +#: src/include/hwinfo/routines.rb:466 msgid "Storage Media" msgstr "저장 미디어" -#. tree node string -#: src/include/hwinfo/routines.rb:476 +#. tree node string +#: src/include/hwinfo/routines.rb:476 msgid "TV Card" msgstr "TV 카드" -#. tree node string -#: src/include/hwinfo/routines.rb:481 +#. tree node string +#: src/include/hwinfo/routines.rb:481 msgid "DVB Card" msgstr "DVB 카드" -#. tree node string -#: src/include/hwinfo/routines.rb:486 +#. tree node string +#: src/include/hwinfo/routines.rb:486 msgid "USB Type" msgstr "USB 형식" -#. tree node string -#: src/include/hwinfo/routines.rb:491 +#. tree node string +#: src/include/hwinfo/routines.rb:491 msgid "Version" msgstr "버전" -#. tree node string -#: src/include/hwinfo/routines.rb:501 +#. tree node string +#: src/include/hwinfo/routines.rb:501 msgid "Network Card" msgstr "네트워크 카드" -#. tree node string -#: src/include/hwinfo/routines.rb:506 +#. tree node string +#: src/include/hwinfo/routines.rb:506 msgid "BIOS" msgstr "BIOS" -#. tree node string -#: src/include/hwinfo/routines.rb:511 +#. tree node string +#: src/include/hwinfo/routines.rb:511 msgid "Framebuffer Device" msgstr "프레임버퍼 장치" -#. tree node string - bus type -#: src/include/hwinfo/routines.rb:516 +#. tree node string - bus type +#: src/include/hwinfo/routines.rb:516 msgid "IDE" msgstr "IDE" -#. tree node string - bus type -#: src/include/hwinfo/routines.rb:521 +#. tree node string - bus type +#: src/include/hwinfo/routines.rb:521 msgid "PCI" msgstr "PCI" -#. tree node string - bus type -#: src/include/hwinfo/routines.rb:526 +#. tree node string - bus type +#: src/include/hwinfo/routines.rb:526 msgid "USB" msgstr "USB" -#. tree node string - bus type -#: src/include/hwinfo/routines.rb:531 +#. tree node string - bus type +#: src/include/hwinfo/routines.rb:531 msgid "ISA PnP" msgstr "ISA PnP" -#. tree node -#: src/include/hwinfo/routines.rb:536 +#. tree node +#: src/include/hwinfo/routines.rb:536 msgid "USB Controller" msgstr "USB 컨트롤러" -#. tree node -#: src/include/hwinfo/routines.rb:541 +#. tree node +#: src/include/hwinfo/routines.rb:541 msgid "USB Hub" msgstr "USB 허브" -#. tree node -#: src/include/hwinfo/routines.rb:546 +#. tree node +#: src/include/hwinfo/routines.rb:546 msgid "IEEE1394 Controller" msgstr "IEEE1394 컨트롤러" -#. tree node -#: src/include/hwinfo/routines.rb:551 +#. tree node +#: src/include/hwinfo/routines.rb:551 msgid "SCSI" msgstr "SCSI" -#. tree node -#: src/include/hwinfo/routines.rb:556 +#. tree node +#: src/include/hwinfo/routines.rb:556 msgid "Scanner" msgstr "스캐너" -#. tree node -#: src/include/hwinfo/routines.rb:560 +#. tree node +#: src/include/hwinfo/routines.rb:560 msgid "Mouse" msgstr "마우스" -#. tree node -#: src/include/hwinfo/routines.rb:563 +#. tree node +#: src/include/hwinfo/routines.rb:563 msgid "Joystick" msgstr "조이스틱" -#. tree node -#: src/include/hwinfo/routines.rb:568 +#. tree node +#: src/include/hwinfo/routines.rb:568 msgid "Braille Display" msgstr "점자 디스플레이" -#. tree node -#: src/include/hwinfo/routines.rb:573 +#. tree node +#: src/include/hwinfo/routines.rb:573 msgid "Chipcard Reader" msgstr "칩카드 리더" -#. tree node - Digital camera or WebCam -#: src/include/hwinfo/routines.rb:578 +#. tree node - Digital camera or WebCam +#: src/include/hwinfo/routines.rb:578 msgid "Camera" msgstr "카메라" -#. Point-to-Point Protocol Over Ethernet -#: src/include/hwinfo/routines.rb:583 +#. Point-to-Point Protocol Over Ethernet +#: src/include/hwinfo/routines.rb:583 msgid "PPP over Ethernet" msgstr "이더넷을 이용한 PPP " -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:588 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:588 msgid "Bogus Millions of Instructions Per Second" msgstr "보거스 MIPS" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:598 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:598 msgid "Coma Bug" msgstr "코마 버그" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:603 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:603 msgid "f00f Bug" msgstr "f00f 버그" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:608 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:608 msgid "CPU ID Level" msgstr "CPU ID 레벨" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:613 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:613 msgid "Frequency" msgstr "주파수" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:618 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:618 msgid "Floating point division bug" msgstr "부동 소수점 분할 버그" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:623 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:623 msgid "Flags" msgstr "플래그" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:628 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:628 msgid "Floating Point Unit" msgstr "부동 소수점 장치" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:633 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:633 msgid "Floating Point Unit Exception" msgstr "부동 소수점 장치 예외" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:638 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:638 msgid "Halt Bug" msgstr "중지 버그" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:643 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:643 msgid "Processor" msgstr "프로세서" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:648 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:648 msgid "Stepping" msgstr "스테핑" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:658 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:658 msgid "Family" msgstr "패밀리" -#. tree node string - CPU information -#: src/include/hwinfo/routines.rb:668 +#. tree node string - CPU information +#: src/include/hwinfo/routines.rb:668 msgid "WP" msgstr "WP" -#. tree node string - wireless network adapters -#: src/include/hwinfo/routines.rb:673 +#. tree node string - wireless network adapters +#: src/include/hwinfo/routines.rb:673 msgid "Wireless LAN" msgstr "무선 LAN" -#. tree node string - tape devices -#: src/include/hwinfo/routines.rb:678 +#. tree node string - tape devices +#: src/include/hwinfo/routines.rb:678 msgid "Tape" msgstr "테이프" -#. tree node string - Bluetooth devices -#: src/include/hwinfo/routines.rb:683 +#. tree node string - Bluetooth devices +#: src/include/hwinfo/routines.rb:683 msgid "Bluetooth" msgstr "Bluetooth" -#. tree node string - DSL devices -#: src/include/hwinfo/routines.rb:688 +#. tree node string - DSL devices +#: src/include/hwinfo/routines.rb:688 msgid "DSL" msgstr "DSL" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:693 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:693 msgid "Ethernet Network Interface" msgstr "이더넷 네트워크 인터페이스" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:703 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:703 msgid "Loopback Network Interface" msgstr "루프백 네트워크 인터페이스" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:708 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:708 msgid "Partition" msgstr "파티션" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:718 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:718 msgid "Floppy Disk Controller" msgstr "플로피 디스크 컨트롤러" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:723 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:723 msgid "PnP Unclassified Device" msgstr "PnP 분류되지 않은 장치" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:728 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:728 msgid "Unclassified Device" msgstr "분류되지 않은 장치" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:733 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:733 msgid "Main Memory" msgstr "주 메모리" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:738 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:738 msgid "UHCI Host Controller" msgstr "UHCI 호스트 컨트롤러" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:743 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:743 msgid "EHCI Host Controller" msgstr "EHCI 호스트 컨트롤러" -#. tree node string - generic device name -#: src/include/hwinfo/routines.rb:748 +#. tree node string - generic device name +#: src/include/hwinfo/routines.rb:748 msgid "OHCI Host Controller" msgstr "OHCI 호스트 컨트롤러" -#. yes/no strings -#: src/include/hwinfo/routines.rb:879 +#. yes/no strings +#: src/include/hwinfo/routines.rb:879 msgid "Yes" msgstr "예" -#: src/include/hwinfo/routines.rb:879 +#: src/include/hwinfo/routines.rb:879 msgid "No" msgstr "아니오" -#. Linux kernel modules (drivers) -#: src/include/hwinfo/routines.rb:917 +#. Linux kernel modules (drivers) +#: src/include/hwinfo/routines.rb:917 msgid "Modules" msgstr "모듈" -#. tree node string - %1 is device name, %2 is /dev file -#: src/include/hwinfo/routines.rb:929 +#. tree node string - %1 is device name, %2 is /dev file +#: src/include/hwinfo/routines.rb:929 msgid "%1 (%2)" msgstr "%1(%2)" -#. window title -#: src/include/hwinfo/routines.rb:1057 +#. window title +#: src/include/hwinfo/routines.rb:1057 msgid "Save hwinfo Output to File" msgstr "파일에 hwinfo 출력 저장" -#. progress window content -#: src/include/hwinfo/routines.rb:1063 +#. progress window content +#: src/include/hwinfo/routines.rb:1063 msgid "Saving hardware information..." msgstr "카드 정보를 저장하는 중입니다..." -#. error popup message -#: src/include/hwinfo/routines.rb:1071 +#. error popup message +#: src/include/hwinfo/routines.rb:1071 msgid "Saving output to the file '%1' failed." msgstr "출력을 '%1' 파일에 저장하지 못했습니다." -#. encoding: utf-8 -#. File: -#. system_settings.ycp -#. -#. Summary: -#. Configuration of System Settings. PCI ID, Kernel parameters, -#. Bootloader parameters etc. -#. -#. Authors: -#. Lukas Ocilka -#. -#. $Id$ -#. -#. explicitly set no help (otherwise CWM logs an error) -#: src/include/hwinfo/system_settings_dialogs.rb:45 -#: src/include/hwinfo/system_settings_dialogs.rb:176 +#. encoding: utf-8 +#. File: +#. system_settings.ycp +#. +#. Summary: +#. Configuration of System Settings. PCI ID, Kernel parameters, +#. Bootloader parameters etc. +#. +#. Authors: +#. Lukas Ocilka +#. +#. $Id$ +#. +#. explicitly set no help (otherwise CWM logs an error) +#: src/include/hwinfo/system_settings_dialogs.rb:45 +#: src/include/hwinfo/system_settings_dialogs.rb:176 msgid "Kernel Settings" msgstr "커널 설정" -#. combo box label -#: src/include/hwinfo/system_settings_dialogs.rb:93 +#. combo box label +#: src/include/hwinfo/system_settings_dialogs.rb:93 msgid "Global &I/O Scheduler" msgstr "전역 I/O 스케줄러(&I)" -#. combo box item - I/O scheduler -#: src/include/hwinfo/system_settings_dialogs.rb:96 +#. combo box item - I/O scheduler +#: src/include/hwinfo/system_settings_dialogs.rb:96 msgid "Not Configured" msgstr "구성되지 않음" -#. combo box item - I/O scheduler, do not translate the abbreviation in brackets -#: src/include/hwinfo/system_settings_dialogs.rb:98 +#. combo box item - I/O scheduler, do not translate the abbreviation in brackets +#: src/include/hwinfo/system_settings_dialogs.rb:98 msgid "Completely Fair Queuing [cfq]" msgstr "완전한 공정 대기 [cfq]" -#. combo box item - I/O scheduler, do not translate the abbreviation in brackets -#: src/include/hwinfo/system_settings_dialogs.rb:100 +#. combo box item - I/O scheduler, do not translate the abbreviation in brackets +#: src/include/hwinfo/system_settings_dialogs.rb:100 msgid "NOOP [noop]" msgstr "NOOP [noop]" -#. combo box item - I/O scheduler, do not translate the abbreviation in brackets -#: src/include/hwinfo/system_settings_dialogs.rb:102 +#. combo box item - I/O scheduler, do not translate the abbreviation in brackets +#: src/include/hwinfo/system_settings_dialogs.rb:102 msgid "Deadline [deadline]" msgstr "종료일 [종료일]" -#. help text for the scheduler widget, do not translate 'cfq' -#: src/include/hwinfo/system_settings_dialogs.rb:118 +#. help text for the scheduler widget, do not translate 'cfq' +#: src/include/hwinfo/system_settings_dialogs.rb:118 msgid "" "<p><b><big>Global I/O Scheduler</big></b><br>\n" "Select the algorithm which orders and sends commands to disk\n" -"devices. This is a global option, it will be used for all disk devices in " -"the\n" -"system. If the option is not configured, the default scheduler (usually " -"'cfq')\n" -"will be used. See the documentation in the /usr/src/linux/Documentation/" -"block\n" +"devices. This is a global option, it will be used for all disk devices in the\n" +"system. If the option is not configured, the default scheduler (usually 'cfq')\n" +"will be used. See the documentation in the /usr/src/linux/Documentation/block\n" "directory (package kernel-source) for more information.</p>\n" msgstr "" "<p><b><big>전체 I/O 스케줄러</big></b><br>\n" -"디스크 장치로 명령을 보낼 때 전송 순서를 정하는 알고리즘을 선택할 수 있습니" -"다.\n" +"디스크 장치로 명령을 보낼 때 전송 순서를 정하는 알고리즘을 선택할 수 있습니다.\n" "이것은 전체 옵션이므로 해당 시스템의 모든 디스크 장치에 사용됩니다. \n" "이 옵션을 구성하지 않으면 기본(보통 'cfq') 스케줄러가 사용됩니다.\n" "자세한 내용은 /usr/src/linux/Documentation/block 디렉토리의 문서\n" "(kernel-source 패키지)에 있는 설명서를 참조하십시오.</p>\n" -#. .sysconfig.sysctl -#: src/include/hwinfo/system_settings_dialogs.rb:130 +#. .sysconfig.sysctl +#: src/include/hwinfo/system_settings_dialogs.rb:130 msgid "Enable &SysRq Keys" msgstr "SysRq 키 활성화(&S)" -#. TRANSLATORS: Help text - over taken from /etc/sysconfig/sysctl file -#: src/include/hwinfo/system_settings_dialogs.rb:134 +#. TRANSLATORS: Help text - over taken from /etc/sysconfig/sysctl file +#: src/include/hwinfo/system_settings_dialogs.rb:134 msgid "" "<p><b><big>Enable SysRq Keys</big></b><br>\n" -"If you enable SysRq keys, you will have some control over the system even if " -"it\n" -"crashes (such as during kernel debugging). If it is enabled, the key " -"combination\n" +"If you enable SysRq keys, you will have some control over the system even if it\n" +"crashes (such as during kernel debugging). If it is enabled, the key combination\n" "Alt-SysRq- will start the respective command (e.g. reboot the\n" "computer, dump kernel information). For further information, see\n" -"<tt>/usr/src/linux/Documentation/sysrq.txt</tt> (package kernel-source).\n" +"<tt>/usr/src/linux/Documentation/sysrq.txt</tt> (package kernel-source).</p>\n" msgstr "" "<p><b><big>SysRq 키 활성화</big></b><br>\n" "SysRq 키를 활성화하면 커널을 디버깅할 때처럼 충돌이 있을 때도 시스템을 어느\n" @@ -1132,34 +1083,34 @@ "자세한 내용은 <tt>/usr/src/linux/Documentation/sysrq.txt</tt>\n" "(kernel-source 패키지)를 참조하십시오.</p>\n" -#. Short sleep between reads or writes -#: src/include/hwinfo/system_settings_ui.rb:29 +#. Short sleep between reads or writes +#: src/include/hwinfo/system_settings_ui.rb:29 msgid "Reading the Configuration" msgstr "구성 읽기" -#. FIXME: s390: disable reading PCI IDs -#: src/include/hwinfo/system_settings_ui.rb:36 +#. FIXME: s390: disable reading PCI IDs +#: src/include/hwinfo/system_settings_ui.rb:36 msgid "Read the PCI ID settings" msgstr "PCI ID 설정 읽기" -#: src/include/hwinfo/system_settings_ui.rb:36 +#: src/include/hwinfo/system_settings_ui.rb:36 msgid "Read the system settings" msgstr "시스템 설정 읽기" -#: src/include/hwinfo/system_settings_ui.rb:38 +#: src/include/hwinfo/system_settings_ui.rb:38 msgid "Reading the PCI ID settings..." msgstr "PCI ID 설정 읽는 중..." -#: src/include/hwinfo/system_settings_ui.rb:39 +#: src/include/hwinfo/system_settings_ui.rb:39 msgid "Reading the system settings..." msgstr "시스템 설정 읽는 중..." -#: src/include/hwinfo/system_settings_ui.rb:40 -#: src/include/hwinfo/system_settings_ui.rb:80 +#: src/include/hwinfo/system_settings_ui.rb:40 +#: src/include/hwinfo/system_settings_ui.rb:80 msgid "Finished" msgstr "완료됨" -#: src/include/hwinfo/system_settings_ui.rb:42 +#: src/include/hwinfo/system_settings_ui.rb:42 msgid "" "<p><b><big>Reading the Configuration</big></b><br>\n" "Please wait...</p>" @@ -1167,31 +1118,31 @@ "<p><b><big>구성 읽는 중</big></b><br>\n" "잠시 기다려 주십시오...</p>" -#. I have to admit that this is very ugly but it is here -#. to avoid of the very long starting time of the yast module -#. because the Storage module (which is imported by the Bootloader (imported by the SystemSettings module)) -#. has a Read() function call in its constructor. -#: src/include/hwinfo/system_settings_ui.rb:71 +#. I have to admit that this is very ugly but it is here +#. to avoid of the very long starting time of the yast module +#. because the Storage module (which is imported by the Bootloader (imported by the SystemSettings module)) +#. has a Read() function call in its constructor. +#: src/include/hwinfo/system_settings_ui.rb:71 msgid "Saving the Configuration" msgstr "구성 저장" -#: src/include/hwinfo/system_settings_ui.rb:76 +#: src/include/hwinfo/system_settings_ui.rb:76 msgid "Save the PCI ID settings" msgstr "PCI ID 설정 저장" -#: src/include/hwinfo/system_settings_ui.rb:76 +#: src/include/hwinfo/system_settings_ui.rb:76 msgid "Save the system settings" msgstr "시스템 설정 저장" -#: src/include/hwinfo/system_settings_ui.rb:78 +#: src/include/hwinfo/system_settings_ui.rb:78 msgid "Saving the PCI ID settings..." msgstr "PCI ID 설정 저장 중..." -#: src/include/hwinfo/system_settings_ui.rb:79 +#: src/include/hwinfo/system_settings_ui.rb:79 msgid "Saving the system settings..." msgstr "시스템 설정 저장 중..." -#: src/include/hwinfo/system_settings_ui.rb:82 +#: src/include/hwinfo/system_settings_ui.rb:82 msgid "" "<p><b><big>Saving the Configuration</big></b><br>\n" "Please wait...</p>" @@ -1199,67 +1150,67 @@ "<p><b><big>구성 저장 중</big></b><br>\n" "잠시 기다려 주십시오...</p>" -#. PushButton label -#: src/lib/tune/widgets.rb:34 +#. PushButton label +#: src/lib/tune/widgets.rb:34 msgid "System Information" msgstr "시스템 정보" -#. group by CPU names, strip possible white space (see bnc#803000) -#: src/modules/InitHWinfo.rb:56 +#. group by CPU names, strip possible white space (see bnc#803000) +#: src/modules/InitHWinfo.rb:56 msgid "Unknown processor" msgstr "알 수 없는 프로세서" -#. create processor count string -#. the first %s is integer number (greater than 1) -#. the second %s is processor model name -#: src/modules/InitHWinfo.rb:67 +#. create processor count string +#. the first %s is integer number (greater than 1) +#. the second %s is processor model name +#: src/modules/InitHWinfo.rb:67 msgid "%sx %s" msgstr "%sx %s" -#. list separator (placed between items) -#: src/modules/InitHWinfo.rb:74 +#. list separator (placed between items) +#: src/modules/InitHWinfo.rb:74 msgid ", " msgstr "," -#. system manufacturer is unknown -#. system product name is unknown -#: src/modules/InitHWinfo.rb:118 src/modules/InitHWinfo.rb:120 +#. system manufacturer is unknown +#. system product name is unknown +#: src/modules/InitHWinfo.rb:118 src/modules/InitHWinfo.rb:120 msgid "Unknown" msgstr "알 수 없음" -#. probe devices, store model, class, uniq. ID for each device -#. probe by bus -#. list(string) paths = [ "cpu", "memory", "ide", "pci", "scsi", "isapnp", "floppy", "usb", "monitor" ]; -#. probe by device class -#: src/modules/InitHWinfo.rb:235 +#. probe devices, store model, class, uniq. ID for each device +#. probe by bus +#. list(string) paths = [ "cpu", "memory", "ide", "pci", "scsi", "isapnp", "floppy", "usb", "monitor" ]; +#. probe by device class +#: src/modules/InitHWinfo.rb:235 msgid "Hardware Detection" msgstr "하드웨어 검색" -#: src/modules/InitHWinfo.rb:238 +#: src/modules/InitHWinfo.rb:238 msgid "Detect hardware" msgstr "하드웨어 검색" -#: src/modules/InitHWinfo.rb:239 +#: src/modules/InitHWinfo.rb:239 msgid "Detecting hardware..." msgstr "하드웨어를 검색하는 중..." -#: src/modules/InitHWinfo.rb:240 +#: src/modules/InitHWinfo.rb:240 msgid "Hardware detection is in progress. Please wait." msgstr "하드웨어를 검색하는 중입니다. 잠시 기다려 주십시오." -#. set progress bar label -#: src/modules/InitHWinfo.rb:260 +#. set progress bar label +#: src/modules/InitHWinfo.rb:260 msgid "%1..." msgstr "%1..." -#. Error message -#: src/modules/NewID.rb:462 +#. Error message +#: src/modules/NewID.rb:462 msgid "File '%1' does not exist. Cannot set new PCI ID." msgstr "'%1' 파일이 존재하지 않습니다. 새 PCI ID를 설정할 수 없습니다." -#. test for installation proposal -#. %1 - name of kernel driver (e.g. e100) -#. %2 - PCI ID (hexnumbers) -#: src/modules/NewID.rb:686 +#. test for installation proposal +#. %1 - name of kernel driver (e.g. e100) +#. %2 - PCI ID (hexnumbers) +#: src/modules/NewID.rb:686 msgid "Driver: %1, New PCI ID: %2" msgstr "드라이버: %1, 새 PCI ID: %2" Modified: branches/SLE12-SP3/yast/ko/po/update.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/update.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/update.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,57 +14,57 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Proposal for backup during update -#: src/clients/backup_proposal.rb:65 +#. Proposal for backup during update +#: src/clients/backup_proposal.rb:65 msgid "Create Backup of Modified Files" msgstr "변경된 파일들 백업" -#. Proposal for backup during update -#: src/clients/backup_proposal.rb:72 +#. Proposal for backup during update +#: src/clients/backup_proposal.rb:72 msgid "Create Backup of /etc/sysconfig Directory" msgstr "/etc/sysconfig 디렉토리 백업" -#: src/clients/backup_proposal.rb:76 +#: src/clients/backup_proposal.rb:76 msgid "Do Not Create Backups" msgstr "백업을 생성하지 않음" -#. Proposal for backup during update -#: src/clients/backup_proposal.rb:81 +#. Proposal for backup during update +#: src/clients/backup_proposal.rb:81 msgid "Remove Backups from Previous Updates" msgstr "이전의 업데이트로 부터 백업을 삭제" -#. this is a heading -#: src/clients/backup_proposal.rb:107 +#. this is a heading +#: src/clients/backup_proposal.rb:107 msgid "Backup" msgstr "백업" -#. this is a menu entry -#: src/clients/backup_proposal.rb:109 +#. this is a menu entry +#: src/clients/backup_proposal.rb:109 msgid "&Backup" msgstr "백업(&B)" -#. screen title for software selection -#: src/clients/inst_backup.rb:54 +#. screen title for software selection +#: src/clients/inst_backup.rb:54 msgid "Backup System Before Update" msgstr "업데이트 이전에 시스템 백업" -#. checkbox label if user wants to backup modified files -#: src/clients/inst_backup.rb:67 +#. checkbox label if user wants to backup modified files +#: src/clients/inst_backup.rb:67 msgid "Create &Backup of Modified Files" msgstr "수정된 파일의 백업 생성(&B)" -#. checkbox label if user wants to backup /etc/sysconfig -#: src/clients/inst_backup.rb:75 +#. checkbox label if user wants to backup /etc/sysconfig +#: src/clients/inst_backup.rb:75 msgid "Create a &Complete Backup of /etc/sysconfig" msgstr "/etc/sysconfig의 완전한 백업 생성(&C)" -#. checkbox label if user wants remove old backup stuff -#: src/clients/inst_backup.rb:84 +#. checkbox label if user wants remove old backup stuff +#: src/clients/inst_backup.rb:84 msgid "Remove &Old Backups from the Backup Directory" msgstr "백업 디렉토리에서 오래된 백업 제거(&O)" -#. help text for backup dialog during update 1/7 -#: src/clients/inst_backup.rb:91 +#. help text for backup dialog during update 1/7 +#: src/clients/inst_backup.rb:91 msgid "" "<p>To avoid any loss of information during update,\n" "create a <b>backup</b> prior to updating.</p>\n" @@ -72,8 +72,8 @@ "<p>업데이트 중 정보 손실을 방지하려면\n" "업데이트 전에 <b>백업</b>을 생성하십시오.</p>\n" -#. help text for backup dialog during update 2/7 -#: src/clients/inst_backup.rb:98 +#. help text for backup dialog during update 2/7 +#: src/clients/inst_backup.rb:98 msgid "" "<p><b>Warning:</b> This will not be a complete\n" "backup. Only modified files will be saved.</p>\n" @@ -81,13 +81,13 @@ "<p><b>경고:</b> 백업이 완료되지 않을 것입니다.\n" "단지, 변경된 파일만이 저장될 것입니다.\n" -#. help text for backup dialog during update 3/7 -#: src/clients/inst_backup.rb:106 +#. help text for backup dialog during update 3/7 +#: src/clients/inst_backup.rb:106 msgid "<p>Select the desired options.</p>\n" msgstr "<p>원하는 옵션을 선택하십시오.</p>\n" -#. help text for backup dialog during update 4/7 -#: src/clients/inst_backup.rb:112 +#. help text for backup dialog during update 4/7 +#: src/clients/inst_backup.rb:112 msgid "" "<p><b>Create a Backup of Modified Files:</b>\n" "Stores only those modified files that will be replaced during update.</p>\n" @@ -95,20 +95,19 @@ "<p><b>수정된 파일의 백업 생성:</b>\n" "업데이트 중 교체되는 수정된 파일만 저장합니다.</p>\n" -#. help text for backup dialog during update 5/7 -#: src/clients/inst_backup.rb:120 +#. help text for backup dialog during update 5/7 +#: src/clients/inst_backup.rb:120 msgid "" "<p><b>Create a Complete Backup of\n" -"/etc/sysconfig:</b> This covers all configuration files that are part of " -"the\n" +"/etc/sysconfig:</b> This covers all configuration files that are part of the\n" "sysconfig mechanism, even those that will not be replaced.</p>\n" msgstr "" "<p><b>/etc/sysconfig의\n" "전체 백업 생성:</b> 교체되지 않는 파일을 포함하여 sysconfig 메커니즘에 속한\n" "모든 구성 파일을 다룹니다.</p>\n" -#. help text for backup dialog during update 6/7 -#: src/clients/inst_backup.rb:130 +#. help text for backup dialog during update 6/7 +#: src/clients/inst_backup.rb:130 msgid "" "<p><b>Remove Old Backups from the Backup\n" "Directory:</b> If your current system already is the result of an earlier\n" @@ -120,36 +119,36 @@ "이전의 설정 파일이 백업되어 있을 것입니다. 그들을 삭제하려면\n" "이 옵션을 선택하십시오.</p>\n" -#. help text for backup dialog during update 7/7 -#: src/clients/inst_backup.rb:142 +#. help text for backup dialog during update 7/7 +#: src/clients/inst_backup.rb:142 msgid "<p>All backups are placed in %1.</p>" msgstr "<p>모든 백업은 %1에 배치됩니다.</p>" -#. error popup, user did not enter a valid directory specification -#: src/clients/inst_backup.rb:222 +#. error popup, user did not enter a valid directory specification +#: src/clients/inst_backup.rb:222 msgid "Invalid backup path." msgstr "유효하지 않은 백업 경로" -#. there is not enough space for the backup during update -#. inform the user about this (MB==megabytes) -#: src/clients/inst_backup.rb:261 +#. there is not enough space for the backup during update +#. inform the user about this (MB==megabytes) +#: src/clients/inst_backup.rb:261 msgid "Minimum disk space of %1 MB required." msgstr "최소 %1 MB의 공간은 있어야 합니다." -#. screen title for update options -#. this is a heading -#: src/clients/inst_update.rb:48 src/clients/update_proposal.rb:284 +#. screen title for update options +#. this is a heading +#: src/clients/inst_update.rb:48 src/clients/update_proposal.rb:284 msgid "Update Options" msgstr "업데이트 옵션" -#. push button label -#: src/clients/inst_update.rb:51 +#. push button label +#: src/clients/inst_update.rb:51 msgid "Select Patterns" msgstr "패턴 선택" -#. check if state changed -#. Display warning message -#: src/clients/inst_update.rb:59 +#. check if state changed +#. Display warning message +#: src/clients/inst_update.rb:59 msgid "" "You have already chosen software from \"Detailed selection\".\n" "You will lose that selection if you change the basic selection." @@ -157,51 +156,51 @@ "이미 \"세부 선택\"에서 선택한 소프트웨어입니다.\n" "기본적인 선택을 바꾸면 선택한 것을 잃을 것입니다." -#. Build and show dialog -#. Table item (unknown system [neither openSUSE 11.1 nor SLES 14 nor ...]) -#. Table item (unknown architecture) -#. Table item (unknown file system) -#. label - name of sustem to update -#. starts with >`< -#. Get installed release name -#. TRANSLATORS: label for an unknown installed system -#: src/clients/inst_update.rb:69 src/clients/inst_update.rb:74 -#: src/include/update/rootpart.rb:100 src/include/update/rootpart.rb:106 -#: src/include/update/rootpart.rb:126 src/modules/RootPart.rb:157 -#: src/modules/RootPart.rb:1442 src/modules/RootPart.rb:1448 -#: src/modules/RootPart.rb:2006 +#. Build and show dialog +#. Table item (unknown system [neither openSUSE 11.1 nor SLES 14 nor ...]) +#. Table item (unknown architecture) +#. Table item (unknown file system) +#. label - name of sustem to update +#. starts with >`< +#. Get installed release name +#. TRANSLATORS: label for an unknown installed system +#: src/clients/inst_update.rb:69 src/clients/inst_update.rb:74 +#: src/include/update/rootpart.rb:100 src/include/update/rootpart.rb:106 +#: src/include/update/rootpart.rb:126 src/modules/RootPart.rb:157 +#: src/modules/RootPart.rb:1442 src/modules/RootPart.rb:1448 +#: src/modules/RootPart.rb:2006 msgid "Unknown" msgstr "알수 없음`" -#. label showing to which version we are updating -#: src/clients/inst_update.rb:80 +#. label showing to which version we are updating +#: src/clients/inst_update.rb:80 msgid "Update to %1" msgstr "%1 업데이트" -#. label showing from which version to which version we are updating -#: src/clients/inst_update.rb:84 +#. label showing from which version to which version we are updating +#: src/clients/inst_update.rb:84 msgid "Update from %1 to %2" msgstr "%1에서 %2까지 업데이트" -#. frame title for update selection -#: src/clients/inst_update.rb:96 +#. frame title for update selection +#: src/clients/inst_update.rb:96 msgid "Update Mode" msgstr "업데이트 모드" -#. radio button label for update including new packages -#: src/clients/inst_update.rb:108 +#. radio button label for update including new packages +#: src/clients/inst_update.rb:108 msgid "" "&Update with Installation of New Software and Features\n" "Based on the Selection:\n" msgstr "새로운 소프트웨어의 설치와 선택에 근거한 특징들과 함께 업데이트(&U)\n" -#. radio button label for update of already installed packages only -#: src/clients/inst_update.rb:122 +#. radio button label for update of already installed packages only +#: src/clients/inst_update.rb:122 msgid "Only U&pdate Installed Packages" msgstr "설치된 패키지들만을 업데이트(&P)" -#. help text for dialog "update options" 1/4 -#: src/clients/inst_update.rb:143 +#. help text for dialog "update options" 1/4 +#: src/clients/inst_update.rb:143 msgid "" "<p>The update option offers two different modes. In\n" "either case, we recommend to make a backup of your personal data.</p>\n" @@ -209,28 +208,25 @@ "<p>업데이트 옵션은 두 가지 모드를 제공합니다.\n" "두 경우 모두 개인 데이터의 백업을 만드는 것이 좋습니다.</p>\n" -#. help text for dialog "update options" 2/4, %1 is a product name -#: src/clients/inst_update.rb:151 +#. help text for dialog "update options" 2/4, %1 is a product name +#: src/clients/inst_update.rb:151 msgid "" "<p><b>With New Software:</b> This default setting\n" "updates the existing software and installs all new features and benefits of\n" -"the new <tt>%1</tt> version. The selection is based on the former " -"predefined\n" +"the new <tt>%1</tt> version. The selection is based on the former predefined\n" "software selection.</p>\n" msgstr "" "<p><b>새 소프트웨어 사용:</b> 이 기본 설정은\n" "기존 소프트웨어를 업데이트하고 새로운 <tt>%1</tt> 버전의\n" -" 새로운 모든 기능과 장점을 설치합니다. 선택 항목은 미리 정의된 이전 소프트웨" -"어의\n" +" 새로운 모든 기능과 장점을 설치합니다. 선택 항목은 미리 정의된 이전 소프트웨어의\n" " 선택 항목을 기반으로 합니다.</p>\n" -#. help text for dialog "update options" 3/4 -#: src/clients/inst_update.rb:164 +#. help text for dialog "update options" 3/4 +#: src/clients/inst_update.rb:164 msgid "" "<p><b>Only Installed Packages:</b> This selection\n" "only updates the packages already installed on your system. <i>Note:</i>\n" -"New software in the predefined software selection, such as new YaST modules, " -"is\n" +"New software in the predefined software selection, such as new YaST modules, is\n" "not available after the update. You might miss new features.</p>\n" msgstr "" "<p><b>설치된 패키지만:</b> 이 선택은\n" @@ -238,20 +234,19 @@ "미리 정의된 소프트웨어 선택의 새 소프트웨어(예: 새 YaST 모듈)는\n" "업데이트 후에 사용할 수 없습니다. 새 기능이 누락되었을 수 있습니다.</p>\n" -#. help text for dialog "update options" 4/4 -#: src/clients/inst_update.rb:175 +#. help text for dialog "update options" 4/4 +#: src/clients/inst_update.rb:175 msgid "" "<p>After the update, some software might not\n" -"function anymore. Activate <b>Delete Unmaintained Packages</b> to delete " -"those\n" +"function anymore. Activate <b>Delete Unmaintained Packages</b> to delete those\n" "packages during the update.</p>\n" msgstr "" "<p>업데이트 후에 일부 소프트웨어가 작동하지 않을 수\n" "있습니다. 업데이트하는 동안 이러한 패키지를 삭제하려면\n" " <b>지속되지 않는 패키지들을 삭제</b>를 활성화하십시오.</p>\n" -#. warning / question -#: src/clients/inst_update.rb:231 +#. warning / question +#: src/clients/inst_update.rb:231 msgid "" "Changing the update method to 'Update packages only' might\n" "lead into non-bootable or non-working system if you do not\n" @@ -265,8 +260,8 @@ "\n" "계속하시겠습니까?" -#. yes/no question -#: src/clients/inst_update.rb:243 +#. yes/no question +#: src/clients/inst_update.rb:243 msgid "" "Do you really want\n" "to reset your detailed selection?" @@ -274,138 +269,128 @@ "정말 세부 선택의\n" "초기화를 원합니까?" -#. proposal for packages during update, %1 is count of packages -#: src/clients/packages_proposal.rb:123 +#. proposal for packages during update, %1 is count of packages +#: src/clients/packages_proposal.rb:123 msgid "Packages to Update: %1" msgstr "업데이트할 패키지: %1" -#. proposal for packages during update, %1 is count of packages -#: src/clients/packages_proposal.rb:131 +#. proposal for packages during update, %1 is count of packages +#: src/clients/packages_proposal.rb:131 msgid "New Packages to Install: %1" msgstr "설치할 새로운 패키지: %1" -#. proposal for packages during update, %1 is count of packages -#: src/clients/packages_proposal.rb:139 +#. proposal for packages during update, %1 is count of packages +#: src/clients/packages_proposal.rb:139 msgid "Packages to Remove: %1" msgstr "제거할 패키지: %1" -#. part of summary, %1 is size of packages (in MB or GB) -#: src/clients/packages_proposal.rb:147 +#. part of summary, %1 is size of packages (in MB or GB) +#: src/clients/packages_proposal.rb:147 msgid "Total Size of Packages to Update: %1" msgstr "업데이트할 패키지의 총 크기: %1" -#. TRANSLATORS: warning text, keep the HTML tags (<a href...>) untouched -#: src/clients/packages_proposal.rb:168 -msgid "" -"Cannot solve all conflicts. Manual intervention is required." -msgstr "" -"모든 충돌을 해결할 수 없습니다. 수동 개입이 필요합니다.</a>" +#. TRANSLATORS: warning text, keep the HTML tags (<a href...>) untouched +#: src/clients/packages_proposal.rb:168 +msgid "Cannot solve all conflicts. Manual intervention is required.</a>" +msgstr "모든 충돌을 해결할 수 없습니다. 수동 개입이 필요합니다.</a>" -#. this is a heading -#: src/clients/packages_proposal.rb:209 +#. this is a heading +#: src/clients/packages_proposal.rb:209 msgid "Packages" msgstr "패키지들" -#. this is a menu entry -#: src/clients/packages_proposal.rb:211 +#. this is a menu entry +#: src/clients/packages_proposal.rb:211 msgid "&Packages" msgstr "패키지들(&P)" -#. Proposal for system to update -#: src/clients/rootpart_proposal.rb:70 +#. Proposal for system to update +#: src/clients/rootpart_proposal.rb:70 msgid "No root partition found" msgstr "root 파티션을 찾을수 없음" -#. Proposal for system to update -#: src/clients/rootpart_proposal.rb:97 +#. Proposal for system to update +#: src/clients/rootpart_proposal.rb:97 msgid "%1 on root partition %2" msgstr "root 파티션 %2에 대한 %1" -#. inform user in the proposal about the failed mount -#. error report -#. error report -#: src/clients/rootpart_proposal.rb:110 src/include/update/rootpart.rb:385 -#: src/lib/update/clients/inst_update_partition_auto.rb:64 +#. inform user in the proposal about the failed mount +#. error report +#. error report +#: src/clients/rootpart_proposal.rb:110 src/include/update/rootpart.rb:385 +#: src/lib/update/clients/inst_update_partition_auto.rb:64 msgid "Failed to mount target system" msgstr "목표 시스템의 마운트 실패" -#. this is a heading -#: src/clients/rootpart_proposal.rb:149 +#. this is a heading +#: src/clients/rootpart_proposal.rb:149 msgid "Selected for Update" msgstr "업데이트 선택" -#. this is a menu entry -#: src/clients/rootpart_proposal.rb:151 +#. this is a menu entry +#: src/clients/rootpart_proposal.rb:151 msgid "&Selected for Update" msgstr "업데이트 선택(&S)" -#. Update::deleteOldPackages = false; -#: src/clients/run_update.rb:57 +#. Update::deleteOldPackages = false; +#: src/clients/run_update.rb:57 msgid "&Update" msgstr "업데이트(&U)" -#. TRANSLATORS: error message - the module does not provide command line interface -#: src/clients/update.rb:47 +#. TRANSLATORS: error message - the module does not provide command line interface +#: src/clients/update.rb:47 msgid "There is no user interface available for this module." msgstr "이 모듈에 대한 사용자 인터페이스를 사용할 수 없습니다." -#. error message in proposal -#. part of error popup message -#: src/clients/update_proposal.rb:87 src/clients/update_proposal.rb:390 +#. error message in proposal +#. part of error popup message +#: src/clients/update_proposal.rb:87 src/clients/update_proposal.rb:390 msgid "Cannot read the current RPM Database." msgstr "현재 RPM 데이터베이스를 읽을 수 없습니다." -#. TRANSLATORS: unknown product (label) -#. TRANSLATORS: unknown product (label) -#. TRANSLATORS: unknown product name -#. TRANSLATORS: unknown product name -#: src/clients/update_proposal.rb:101 src/clients/update_proposal.rb:119 -#: src/clients/update_proposal.rb:174 src/clients/update_proposal.rb:180 +#. TRANSLATORS: unknown product (label) +#. TRANSLATORS: unknown product (label) +#. TRANSLATORS: unknown product name +#. TRANSLATORS: unknown product name +#: src/clients/update_proposal.rb:101 src/clients/update_proposal.rb:119 +#: src/clients/update_proposal.rb:174 src/clients/update_proposal.rb:180 msgid "Unknown product" msgstr "알 수 없는 제품" -#. error message in proposal -#: src/clients/update_proposal.rb:129 -msgid "" -"The installed product (%{update_from}) is not compatible with the product on " -"the installation media (%{update_to})." -msgstr "" -"설치된 제품(%{update_from})이 설치 미디어의 제품(%{update_to})과 호환되지 않" -"습니다." +#. error message in proposal +#: src/clients/update_proposal.rb:129 +msgid "The installed product (%{update_from}) is not compatible with the product on the installation media (%{update_to})." +msgstr "설치된 제품(%{update_from})이 설치 미디어의 제품(%{update_to})과 호환되지 않습니다." -#. TRANSLATORS: proposal error, %1 is the version of installed system -#. %2 is the version being installed -#: src/clients/update_proposal.rb:146 +#. TRANSLATORS: proposal error, %1 is the version of installed system +#. %2 is the version being installed +#: src/clients/update_proposal.rb:146 msgid "" -"Updating system to another version (%1 -> %2) is not supported on the " -"running system.<br>\n" +"Updating system to another version (%1 -> %2) is not supported on the running system.<br>\n" "Boot from the installation media and use a normal upgrade\n" "or disable software repositories of products with different versions.\n" msgstr "" -"실행 중인 시스템에서는 시스템을 다른 버전으로 업데이트(%1 -> %2)할 수 없습니" -"다.<br>\n" +"실행 중인 시스템에서는 시스템을 다른 버전으로 업데이트(%1 -> %2)할 수 없습니다.<br>\n" "설치 미디어에서 부팅하고 정상 업그레이드를 사용하거나\n" "다른 버전이 포함된 제품의 소프트웨어 리포지토리를 비활성화하십시오.\n" -#. TRANSLATORS: proposal warning, both %1 and %2 are replaced with product names -#: src/clients/update_proposal.rb:167 +#. TRANSLATORS: proposal warning, both %1 and %2 are replaced with product names +#: src/clients/update_proposal.rb:167 msgid "Warning: Updating from '%1' to '%2', products do not exactly match." -msgstr "" -"경고: '%1'에서 '%2'(으)로 업그레이드 중, 제품이 올바르게 일치하지 않습니다." +msgstr "경고: '%1'에서 '%2'(으)로 업그레이드 중, 제품이 올바르게 일치하지 않습니다." -#. Proposal for backup during update -#: src/clients/update_proposal.rb:194 +#. Proposal for backup during update +#: src/clients/update_proposal.rb:194 msgid "Only update installed packages" msgstr "설치된 패키지만 업데이트" -#. proposal string -#: src/clients/update_proposal.rb:209 +#. proposal string +#: src/clients/update_proposal.rb:209 msgid "Update based on patterns" msgstr "패턴을 기반으로 업데이트" -#. TRANSLATORS: proposal dialog help -#: src/clients/update_proposal.rb:238 +#. TRANSLATORS: proposal dialog help +#: src/clients/update_proposal.rb:238 msgid "" "<p><b><big>Update Options</big></b> Select how your system will be updated.\n" "Choose if only installed packages should be updated or new ones should be\n" @@ -417,18 +402,18 @@ "(기본값) 선택하십시오. 유지 관리되지 않는 패키지를 삭제할지\n" "여부를 결정하십시오.</p>\n" -#. this is a menu entry -#: src/clients/update_proposal.rb:286 +#. this is a menu entry +#: src/clients/update_proposal.rb:286 msgid "&Update Options" msgstr "업데이트 옵션(&U)" -#. part of error popup message, %1 stands for newline-separated list of files -#: src/clients/update_proposal.rb:393 +#. part of error popup message, %1 stands for newline-separated list of files +#: src/clients/update_proposal.rb:393 msgid "None of these files exist:%1" msgstr "다음 파일이 모두 없습니다:%1" -#. continue-cancel popup -#: src/clients/update_proposal.rb:548 +#. continue-cancel popup +#: src/clients/update_proposal.rb:548 msgid "" "The installed product is not compatible with the product\n" "on the installation media. If you try to update using the\n" @@ -440,28 +425,28 @@ " 시도할 경우 시스템이 시작되지 않거나 일부 응용\n" " 프로그램이 제대로 실행되지 않을 수 있습니다." -#. Table item (unknown system) -#: src/include/update/rootpart.rb:93 +#. Table item (unknown system) +#: src/include/update/rootpart.rb:93 msgid "Unknown Linux" msgstr "알 수 없는 Linux" -#. Table item (unknown system) -#: src/include/update/rootpart.rb:96 +#. Table item (unknown system) +#: src/include/update/rootpart.rb:96 msgid "Unknown or Non-Linux" msgstr "알 수 없거나 Linux가 아님" -#. is a linux fs, can be a root fs, has a fs name -#: src/include/update/rootpart.rb:118 +#. is a linux fs, can be a root fs, has a fs name +#: src/include/update/rootpart.rb:118 msgid "%1 (%2)" msgstr "%1(%2)" -#. label for selection of root partition (for boot) -#: src/include/update/rootpart.rb:186 +#. label for selection of root partition (for boot) +#: src/include/update/rootpart.rb:186 msgid "Partition or System to Boot:" msgstr "부팅 할 파티션 또는 시스템:" -#. help text for root partition dialog (for boot) -#: src/include/update/rootpart.rb:189 +#. help text for root partition dialog (for boot) +#: src/include/update/rootpart.rb:189 msgid "" "<p>\n" "Select the partition or system to boot.\n" @@ -471,13 +456,13 @@ "부팅 할 파티션 또는 시스템을 선택하십시오.\n" "</p>\n" -#. label for selection of root partition (for update) -#: src/include/update/rootpart.rb:196 +#. label for selection of root partition (for update) +#: src/include/update/rootpart.rb:196 msgid "Partition or System to Update:" msgstr "업데이트 할 파티션 또는 시스템:" -#. help text for root partition dialog (for update) -#: src/include/update/rootpart.rb:199 +#. help text for root partition dialog (for update) +#: src/include/update/rootpart.rb:199 msgid "" "<p>\n" "Select the partition or system to update.\n" @@ -487,13 +472,13 @@ "업데이트 할 파티션 또는 시스템을 선택하십시오.\n" "</p>\n" -#. headline for dialog "Select for update" -#: src/include/update/rootpart.rb:207 +#. headline for dialog "Select for update" +#: src/include/update/rootpart.rb:207 msgid "Select for Update" msgstr "업데이트를 위한 선택" -#. help text for root partition dialog (general part) -#: src/include/update/rootpart.rb:214 +#. help text for root partition dialog (general part) +#: src/include/update/rootpart.rb:214 msgid "" "<p>\n" "<b>Show All Partitions</b> expands the list to a\n" @@ -505,43 +490,43 @@ "개요를 위해 목록을 확장합니다.\n" "</p>\n" -#. table header -#: src/include/update/rootpart.rb:234 +#. table header +#: src/include/update/rootpart.rb:234 msgid "System" msgstr "시스템" -#. table header item -#: src/include/update/rootpart.rb:236 +#. table header item +#: src/include/update/rootpart.rb:236 msgid "Partition" msgstr "파티션" -#. table header item -#: src/include/update/rootpart.rb:238 +#. table header item +#: src/include/update/rootpart.rb:238 msgid "Architecture" msgstr "아키텍쳐" -#. table header item -#: src/include/update/rootpart.rb:240 +#. table header item +#: src/include/update/rootpart.rb:240 msgid "File System" msgstr "파일 시스템" -#. table header item -#: src/include/update/rootpart.rb:242 +#. table header item +#: src/include/update/rootpart.rb:242 msgid "Label" msgstr "레이블" -#. check box -#: src/include/update/rootpart.rb:252 +#. check box +#: src/include/update/rootpart.rb:252 msgid "&Show All Partitions" msgstr "모든 파티션 표시(&S)" -#. pushbutton to (rightaway) boot the system selected above -#: src/include/update/rootpart.rb:283 +#. pushbutton to (rightaway) boot the system selected above +#: src/include/update/rootpart.rb:283 msgid "&Boot" msgstr "부팅(&B)" -#. error popup -#: src/include/update/rootpart.rb:354 +#. error popup +#: src/include/update/rootpart.rb:354 msgid "" "No installed system that can be upgraded with this product was found\n" "on the selected partition." @@ -549,8 +534,8 @@ "이 제품으로 업그레이드할 수 있는 설치된 시스템을 선택한 파티션에서\n" "찾을 수 없습니다." -#. continue-cancel popup -#: src/include/update/rootpart.rb:364 +#. continue-cancel popup +#: src/include/update/rootpart.rb:364 msgid "" "The architecture of the system installed in the selected partition\n" "is different from the one of this product.\n" @@ -558,24 +543,23 @@ "선택한 파티션에 설치된 시스템의 아키텍처는\n" "이 제품의 아키텍처와 다릅니다.\n" -#. pop-up question -#: src/include/update/rootpart.rb:394 +#. pop-up question +#: src/include/update/rootpart.rb:394 msgid "" -"A possibly incomplete installation has been detected on the selected " -"partition.\n" +"A possibly incomplete installation has been detected on the selected partition.\n" "Are sure you want to use it anyway?" msgstr "" "선택한 파티션에서 불완전한 설치가 감지되었습니다.\n" "그래도 사용하시겠습니까?" -#. button label -#: src/include/update/rootpart.rb:398 +#. button label +#: src/include/update/rootpart.rb:398 msgid "&Yes, Use It" msgstr "예, 사용합니다(&Y)." -#. Target load failed, #466803 -#. Target load failed, #466803 -#: src/include/update/rootpart.rb:436 src/include/update/rootpart.rb:461 +#. Target load failed, #466803 +#. Target load failed, #466803 +#: src/include/update/rootpart.rb:436 src/include/update/rootpart.rb:461 msgid "" "Initializing the system for upgrade has failed for unknown reason.\n" "It is highly recommended not to continue the upgrade process.\n" @@ -587,17 +571,17 @@ "\n" "계속하시겠습니까?" -#: src/include/update/rootpart.rb:442 src/include/update/rootpart.rb:467 +#: src/include/update/rootpart.rb:442 src/include/update/rootpart.rb:467 msgid "&Yes, Continue" msgstr "예, 계속합니다(&Y)." -#. Correctly mounted but incomplete installation found -#: src/lib/update/clients/inst_update_partition_auto.rb:69 +#. Correctly mounted but incomplete installation found +#: src/lib/update/clients/inst_update_partition_auto.rb:69 msgid "A possibly incomplete installation has been detected." msgstr "완료되지 않은 설치가 감지되었습니다." -#. Link to SDB article concerning renaming of devices. -#: src/modules/RootPart.rb:110 +#. Link to SDB article concerning renaming of devices. +#: src/modules/RootPart.rb:110 msgid "" "See the SDB article at %1 for details\n" "about how to solve this problem." @@ -605,18 +589,18 @@ "이 문제를 해결하려면 %1에서\n" "SBD 문서를 참조하십시오." -#. label - name of sustem to update -#: src/modules/RootPart.rb:148 +#. label - name of sustem to update +#: src/modules/RootPart.rb:148 msgid "Unknown Linux System" msgstr "알 수 없는 Linux 시스템" -#. label - name of sustem to update -#: src/modules/RootPart.rb:153 +#. label - name of sustem to update +#: src/modules/RootPart.rb:153 msgid "Non-Linux System" msgstr "비 Linux 시스템" -#. error report, %1 is device (eg. /dev/hda1) -#: src/modules/RootPart.rb:309 +#. error report, %1 is device (eg. /dev/hda1) +#: src/modules/RootPart.rb:309 msgid "" "Cannot unmount partition %1.\n" "\n" @@ -630,33 +614,33 @@ " 데이터를 잃을 수 있습니다. 파티션을 수동으로 언마운트하거나\n" " 컴퓨터를 다시 시작하십시오.\n" -#. label, %1 is partition -#: src/modules/RootPart.rb:380 +#. label, %1 is partition +#: src/modules/RootPart.rb:380 msgid "Checking partition %1" msgstr "파티션 %1 을 검사" -#. @param [String] headline (optional; to disable, use "") -#. @param [String] question -#. @param string button (true) -#. @param string button (false) -#. @param [String] details (hidden under [Details] button; optional; to disable, use "") -#: src/modules/RootPart.rb:417 +#. @param [String] headline (optional; to disable, use "") +#. @param [String] question +#. @param string button (true) +#. @param string button (false) +#. @param [String] details (hidden under [Details] button; optional; to disable, use "") +#: src/modules/RootPart.rb:417 msgid "Show &Details" msgstr "자세히 보기(&D)" -#. #176292, run fsck before jfs is mounted -#: src/modules/RootPart.rb:499 +#. #176292, run fsck before jfs is mounted +#: src/modules/RootPart.rb:499 msgid "Checking file system on %1..." msgstr "%1의 파일 시스템을 확인하는 중..." -#. popup headline -#: src/modules/RootPart.rb:531 +#. popup headline +#: src/modules/RootPart.rb:531 msgid "File System Check Failed" msgstr "파일 시스템 검사 실패" -#. popup question (continue/cancel dialog) -#. %1 is a device name such as /dev/hda5 -#: src/modules/RootPart.rb:535 +#. popup question (continue/cancel dialog) +#. %1 is a device name such as /dev/hda5 +#: src/modules/RootPart.rb:535 msgid "" "The file system check of device %1 has failed.\n" "\n" @@ -666,44 +650,42 @@ "\n" "계속해서 장치를 마운트하시겠습니까?\n" -#. button -#: src/modules/RootPart.rb:544 +#. button +#: src/modules/RootPart.rb:544 msgid "&Skip Mounting" msgstr "탑재 건너뛰기(&S)" -#. yes-no popup -#: src/modules/RootPart.rb:1066 +#. yes-no popup +#: src/modules/RootPart.rb:1066 msgid "Incorrect password. Try again?" msgstr "비밀번호가 잘못되었습니다. 다시 시도하시겠습니까?" -#. TRANSLATORS: a popup headline -#: src/modules/RootPart.rb:1169 +#. TRANSLATORS: a popup headline +#: src/modules/RootPart.rb:1169 msgid "Warning" msgstr "경고" -#. TRANSLATORS: error message, -#. %1 is replaced with the current /boot partition size -#. %2 with the recommended size -#: src/modules/RootPart.rb:1174 +#. TRANSLATORS: error message, +#. %1 is replaced with the current /boot partition size +#. %2 with the recommended size +#: src/modules/RootPart.rb:1174 msgid "" "Your /boot partition is too small (%1 MB).\n" -"We recommend a size of no less than %2 MB or else the new Kernel may not " -"fit.\n" +"We recommend a size of no less than %2 MB or else the new Kernel may not fit.\n" "It is safer to either enlarge the partition\n" "or not use a /boot partition at all.\n" "\n" "Do you want to continue updating the current system?\n" msgstr "" "/boot 파티션이 너무 작습니다(%1MB).\n" -"%2MB 이상의 크기를 사용하는 것이 좋습니다. 그렇지 않으면 새 커널이 들어가지 " -"않을 수 있습니다.\n" +"%2MB 이상의 크기를 사용하는 것이 좋습니다. 그렇지 않으면 새 커널이 들어가지 않을 수 있습니다.\n" "파티션을 확대하거나\n" "/boot 파티션을 사용하지 않는 것이 안전합니다.\n" "\n" "계속해서 현재 시스템을 업데이트하시겠습니까?\n" -#. label in a popup, %1 is device (eg. /dev/hda1), %2 is output of the 'mount' command -#: src/modules/RootPart.rb:1266 +#. label in a popup, %1 is device (eg. /dev/hda1), %2 is output of the 'mount' command +#: src/modules/RootPart.rb:1266 msgid "" "The partition %1 could not be mounted.\n" "\n" @@ -723,28 +705,28 @@ "마운트 옵션을 확인하거나 수정하려면 [마운트 옵션 지정]을 클릭하십시오.\n" "업데이트를 중단하려면 [취소]를 클릭하십시오.\n" -#. push button -#: src/modules/RootPart.rb:1284 +#. push button +#: src/modules/RootPart.rb:1284 msgid "&Specify Mount Options" msgstr "마운트 옵션 지정(&S)" -#. popup heading -#: src/modules/RootPart.rb:1300 +#. popup heading +#: src/modules/RootPart.rb:1300 msgid "Mount Options" msgstr "마운트 옵션" -#. text entry label -#: src/modules/RootPart.rb:1303 +#. text entry label +#: src/modules/RootPart.rb:1303 msgid "&Mount Point" msgstr "마운트 포인트(&M)" -#. tex entry label -#: src/modules/RootPart.rb:1306 +#. tex entry label +#: src/modules/RootPart.rb:1306 msgid "&Device" msgstr "장치(&D)" -#. text entry label -#: src/modules/RootPart.rb:1311 +#. text entry label +#: src/modules/RootPart.rb:1311 msgid "" "&File System\n" "(empty for autodetection)" @@ -752,13 +734,13 @@ "파일 시스템\n" "(자동 검색을 위해 비워 둠)(&F)" -#. error message -#: src/modules/RootPart.rb:1388 +#. error message +#: src/modules/RootPart.rb:1388 msgid "The /var partition %1 could not be mounted.\n" msgstr "/var 파티션 %1을(를) 마운트할 수 없습니다.\n" -#. Informational text about selected partition, %x are replaced with values later -#: src/modules/RootPart.rb:1429 +#. Informational text about selected partition, %x are replaced with values later +#: src/modules/RootPart.rb:1429 msgid "" "<b>File system:</b> %1, <b>Type:</b> %2,<br>\n" "<b>Label:</b> %3, <b>Size:</b> %4,<br>\n" @@ -770,46 +752,43 @@ "<b>udev ID:</b> %5,<br>\n" "<b>udev 경로:</b> %6" -#: src/modules/RootPart.rb:1443 +#: src/modules/RootPart.rb:1443 msgid "None" msgstr "없음" -#. a popup caption -#: src/modules/RootPart.rb:1466 +#. a popup caption +#: src/modules/RootPart.rb:1466 msgid "Unable to find the /var partition automatically" msgstr "/var 파티션을 자동으로 찾을 수 없습니다." -#. a popup message -#: src/modules/RootPart.rb:1471 +#. a popup message +#: src/modules/RootPart.rb:1471 msgid "" -"Your system uses a separate /var partition which is required for the " -"upgrade\n" -"process to detect the disk-naming changes. Select the /var partition " -"manually\n" +"Your system uses a separate /var partition which is required for the upgrade\n" +"process to detect the disk-naming changes. Select the /var partition manually\n" "to continue the upgrade process." msgstr "" "시스템에서 디스크 이름 변경 사항을 감지하기 위해\n" -"업그레이드 프로세스에 필요한 별개의 /var 파티션을 사용합니다. 업그레이드 프로" -"세스를 계속하려면\n" +"업그레이드 프로세스에 필요한 별개의 /var 파티션을 사용합니다. 업그레이드 프로세스를 계속하려면\n" "/var 파티션을 수동으로 선택하십시오." -#. a combo-box label -#: src/modules/RootPart.rb:1484 +#. a combo-box label +#: src/modules/RootPart.rb:1484 msgid "&Select /var Partition Device" msgstr "/var 파티션 장치 선택(&S)" -#. an informational rich-text widget label -#: src/modules/RootPart.rb:1490 +#. an informational rich-text widget label +#: src/modules/RootPart.rb:1490 msgid "Device Info" msgstr "장치 정보" -#. error message -#: src/modules/RootPart.rb:1631 +#. error message +#: src/modules/RootPart.rb:1631 msgid "Unable to mount /var partition with this disk configuration.\n" msgstr "이 디스크 구성으로는 /var 파티션을 마운트할 수 없습니다.\n" -#. popup message, %1 will be replace with the name of the logfile -#: src/modules/RootPart.rb:1662 +#. popup message, %1 will be replace with the name of the logfile +#: src/modules/RootPart.rb:1662 msgid "" "Partitions could not be mounted.\n" "\n" @@ -819,84 +798,81 @@ "\n" " %1 로그 파일을 확인하십시오." -#. read the keyboard settings now, so that it used when -#. typing passwords for encrypted partitions -#. Calling a script because otherwise this module would depend on yast2-country -#: src/modules/RootPart.rb:1706 +#. read the keyboard settings now, so that it used when +#. typing passwords for encrypted partitions +#. Calling a script because otherwise this module would depend on yast2-country +#: src/modules/RootPart.rb:1706 msgid "" -"Some partitions in the system on %1 are mounted by kernel-device name. This " -"is\n" +"Some partitions in the system on %1 are mounted by kernel-device name. This is\n" "not reliable for the update since kernel-device names are unfortunately not\n" -"persistent. It is strongly recommended to start the old system and change " -"the\n" +"persistent. It is strongly recommended to start the old system and change the\n" "mount-by method to any other method for all partitions." msgstr "" "%1에서 시스템의 일부 파티션은 커널-장치 이름별로 탑재됩니다.\n" "커널-장치 이름은 영구적이지 않기 때문에 업데이트 작업을 신뢰할 수 없습니다.\n" -"이전 시스템을 시작하고 모든 파티션에 대해 탑재 방법을 다른 방법으로 변경하는 " -"것이\n" +"이전 시스템을 시작하고 모든 파티션에 대해 탑재 방법을 다른 방법으로 변경하는 것이\n" "좋습니다." -#. error message -#: src/modules/RootPart.rb:1724 +#. error message +#: src/modules/RootPart.rb:1724 msgid "No fstab found." msgstr "fstab를 찾을수 없습니다." -#. message part 1 -#: src/modules/RootPart.rb:1749 +#. message part 1 +#: src/modules/RootPart.rb:1749 msgid "The root partition in /etc/fstab has an invalid root device.\n" msgstr "/etc/fstab의 루트 파티션에 잘못된 루트 장치가 있습니다.\n" -#. message part 2 -#: src/modules/RootPart.rb:1754 +#. message part 2 +#: src/modules/RootPart.rb:1754 msgid "It is currently mounted as %1 but listed as %2.\n" msgstr "이 장치는 현재 %1(으)로 마운트되어 있지만 %2(으)로 표시됩니다.\n" -#. TRANSLATORS: label for filesystem snapshot taken before system update -#: src/modules/RootPart.rb:1810 +#. TRANSLATORS: label for filesystem snapshot taken before system update +#: src/modules/RootPart.rb:1810 msgid "before update" msgstr "업데이트 전" -#. prepare progress-bar -#: src/modules/RootPart.rb:2131 +#. prepare progress-bar +#: src/modules/RootPart.rb:2131 msgid "Evaluating root partition. One moment please..." msgstr "root 파티션을 검사합니다. 잠시 기다리십시오..." -#. intermediate popup while mounting partitions -#: src/modules/RootPart.rb:2214 +#. intermediate popup while mounting partitions +#: src/modules/RootPart.rb:2214 msgid "Mounting partitions. One moment please..." msgstr "파티션을 마운트합니다. 잠시 기다리십시오..." -#. TRANSLATORS: dialog caption -#: src/modules/RootPart.rb:2229 +#. TRANSLATORS: dialog caption +#: src/modules/RootPart.rb:2229 msgid "Searching for Available Systems" msgstr "사용 가능한 시스템 검색 중" -#. Returns product name as found in SuSE-release file. -#. Compatible with OSRelease.ReleaseInformation. -#. Returns SUSEReleaseFileMissingError if SuSE-release file is missing. -#. Returns IOError is SuSE-release could not be open. -#. -#. @param [String] system base-directory, default is "/" -#. @return [String] product name -#: src/modules/SUSERelease.rb:65 +#. Returns product name as found in SuSE-release file. +#. Compatible with OSRelease.ReleaseInformation. +#. Returns SUSEReleaseFileMissingError if SuSE-release file is missing. +#. Returns IOError is SuSE-release could not be open. +#. +#. @param [String] system base-directory, default is "/" +#. @return [String] product name +#: src/modules/SUSERelease.rb:65 msgid "Release file %{file} not found" msgstr "%{file} 릴리스 파일을 찾을 수 없습니다." -#: src/modules/SUSERelease.rb:74 +#: src/modules/SUSERelease.rb:74 msgid "Cannot read release file %{file}" msgstr "릴리스 파일 %{file}을(를) 읽을 수 없습니다." -#. ----------------------------------------------------------------------- -#. GLOBAL FUNCTIONS -#. ----------------------------------------------------------------------- -#: src/modules/Update.rb:306 +#. ----------------------------------------------------------------------- +#. GLOBAL FUNCTIONS +#. ----------------------------------------------------------------------- +#: src/modules/Update.rb:306 msgid "Unknown Product" msgstr "알 수 없는 제품" -#. If the current default desktop is not installed, it's a valid use case -#. and we don't continue further -#: src/modules/Update.rb:788 +#. If the current default desktop is not installed, it's a valid use case +#. and we don't continue further +#: src/modules/Update.rb:788 msgid "" "Cannot select these patterns required for installation:\n" "%{patterns}" @@ -904,7 +880,7 @@ "설치에 필요한 다음 패턴을 선택할 수 없습니다.\n" "%{patterns}" -#: src/modules/Update.rb:793 +#: src/modules/Update.rb:793 msgid "" "Cannot select these packages required for installation:\n" "%{packages}" @@ -912,24 +888,24 @@ "설치에 필요한 다음 패키지를 선택할 수 없습니다.\n" "%{packages}" -#: control/update.glade.translations.glade:3 -#: control/update.glade.translations.glade:5 +#: control/update.glade.translations.glade:3 +#: control/update.glade.translations.glade:5 msgid "Update Settings" msgstr "업데이트 설정" -#: control/update.glade.translations.glade:4 +#: control/update.glade.translations.glade:4 msgid "Update" msgstr "업데이트" -#: control/update.glade.translations.glade:6 -#: control/update.glade.translations.glade:7 +#: control/update.glade.translations.glade:6 +#: control/update.glade.translations.glade:7 msgid "Perform Update" msgstr "업데이트 실행" -#: control/update.glade.translations.glade:8 +#: control/update.glade.translations.glade:8 msgid "Update System Configuration" msgstr "시스템 구성 업데이트" -#: control/update.glade.translations.glade:9 +#: control/update.glade.translations.glade:9 msgid "Update Configuration" msgstr "업데이트 설정" Modified: branches/SLE12-SP3/yast/ko/po/users.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/users.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/users.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -15,266 +15,260 @@ "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -#. translators: command line help text for Users module -#: src/clients/groups.rb:100 +#. translators: command line help text for Users module +#: src/clients/groups.rb:100 msgid "Group configuration module" msgstr "그룹 구성 모듈" -#. translators: command line help text for list action -#: src/clients/groups.rb:113 +#. translators: command line help text for list action +#: src/clients/groups.rb:113 msgid "List of available groups" msgstr "사용할 수 있는 그룹 목록입니다." -#. help text for unknown parameter name -#. help text for unknown parameter name -#: src/clients/groups.rb:118 src/clients/users.rb:120 +#. help text for unknown parameter name +#. help text for unknown parameter name +#: src/clients/groups.rb:118 src/clients/users.rb:120 msgid "User parameters that should be listed" msgstr "열거해야 할 사용자 매개변수입니다." -#. translators: command line help text for show action -#: src/clients/groups.rb:125 +#. translators: command line help text for show action +#: src/clients/groups.rb:125 msgid "Show information of selected group" msgstr "선택한 그룹의 정보를 표시합니다." -#. translators: command line help text for delete action -#: src/clients/groups.rb:135 +#. translators: command line help text for delete action +#: src/clients/groups.rb:135 msgid "Delete an existing group" msgstr "기존 그룹을 삭제합니다." -#. translators: command line help text for ad action -#: src/clients/groups.rb:145 +#. translators: command line help text for ad action +#: src/clients/groups.rb:145 msgid "Add new group" msgstr "새 그룹을 추가합니다." -#. help text for unknown parameter name -#. help text for unknown parameter name -#: src/clients/groups.rb:150 src/clients/groups.rb:165 +#. help text for unknown parameter name +#. help text for unknown parameter name +#: src/clients/groups.rb:150 src/clients/groups.rb:165 msgid "Additional (LDAP) group parameters" msgstr "추가(LDAP) 그룹 매개변수" -#. translators: command line help text for ad action -#: src/clients/groups.rb:160 +#. translators: command line help text for ad action +#: src/clients/groups.rb:160 msgid "Edit an existing group" msgstr "기존 그룹 편집" -#. translators: command line help text for list local option -#: src/clients/groups.rb:173 +#. translators: command line help text for list local option +#: src/clients/groups.rb:173 msgid "List of local groups" msgstr "로컬 그룹 목록입니다." -#. translators: command line help text for list system option -#: src/clients/groups.rb:179 +#. translators: command line help text for list system option +#: src/clients/groups.rb:179 msgid "List of system groups" msgstr "시스템 그룹 목록입니다." -#. translators: command line help text for list ldap option -#: src/clients/groups.rb:185 +#. translators: command line help text for list ldap option +#: src/clients/groups.rb:185 msgid "List of LDAP groups" msgstr "LDAP 그룹 목록입니다." -#. translators: command line help text for list nis option -#: src/clients/groups.rb:191 +#. translators: command line help text for list nis option +#: src/clients/groups.rb:191 msgid "List of NIS groups" msgstr "NIS 그룹 목록입니다." -#. translators: command line help text for show uid option -#: src/clients/groups.rb:197 +#. translators: command line help text for show uid option +#: src/clients/groups.rb:197 msgid "GID of the group" msgstr "그룹의 GID입니다." -#. translators: command line help text for groupname option -#: src/clients/groups.rb:204 +#. translators: command line help text for groupname option +#: src/clients/groups.rb:204 msgid "Name of the group" msgstr "그룹 이름입니다." -#. translators: command line help text for 'password' option -#: src/clients/groups.rb:211 +#. translators: command line help text for 'password' option +#: src/clients/groups.rb:211 msgid "Password of the group" msgstr "그룹 비밀번호" -#. translators: command line help text for 'user' option -#: src/clients/groups.rb:218 -msgid "" -"List of group members, usually usernames, separated by commas. The list of " -"LDAP user DNs must be separated by colons." -msgstr "" -"쉼표로 구분된 그룹 구성원(일반적으로 사용자 이름) 목록입니다. LDAP 사용자 DN " -"목록은 콜론으로 구분해야 합니다." +#. translators: command line help text for 'user' option +#: src/clients/groups.rb:218 +msgid "List of group members, usually usernames, separated by commas. The list of LDAP user DNs must be separated by colons." +msgstr "쉼표로 구분된 그룹 구성원(일반적으로 사용자 이름) 목록입니다. LDAP 사용자 DN 목록은 콜론으로 구분해야 합니다." -#. translators: command line help text for new_groupname option -#: src/clients/groups.rb:225 +#. translators: command line help text for new_groupname option +#: src/clients/groups.rb:225 msgid "New group name" msgstr "새 그룹 이름" -#. translators: command line help text for new_gid option -#: src/clients/groups.rb:232 +#. translators: command line help text for new_gid option +#: src/clients/groups.rb:232 msgid "New GID of the group" msgstr "그룹의 새 GID" -#. translators: command line help text for show option -#: src/clients/groups.rb:239 +#. translators: command line help text for show option +#: src/clients/groups.rb:239 msgid "Type of the group (local, system, nis, ldap)" msgstr "그룹 유형(로컬, 시스템, nis, ldap)" -#. translators: command line help text for ldap_password option -#. translators: command line help text for ldap_password option -#: src/clients/groups.rb:246 src/clients/users.rb:274 +#. translators: command line help text for ldap_password option +#. translators: command line help text for ldap_password option +#: src/clients/groups.rb:246 src/clients/users.rb:274 msgid "Password for LDAP server" msgstr "LDAP 서버에 대한 비밀번호" -#. translators: command line help text for batchmode option -#. translators: command line help text for batchmode option -#: src/clients/groups.rb:253 src/clients/users.rb:295 +#. translators: command line help text for batchmode option +#. translators: command line help text for batchmode option +#: src/clients/groups.rb:253 src/clients/users.rb:295 msgid "Do not ask for missing data; return error instead." msgstr "누락된 데이터를 요청하지 않습니다. 대신 오류를 반환합니다." -#. translators: command line help text for Users module -#: src/clients/users.rb:102 +#. translators: command line help text for Users module +#: src/clients/users.rb:102 msgid "User configuration module" msgstr "사용자 구성 모듈" -#. translators: command line help text for list action -#: src/clients/users.rb:115 +#. translators: command line help text for list action +#: src/clients/users.rb:115 msgid "List of available users" msgstr "사용할 수 있는 사용자 목록입니다." -#. translators: command line help text for show action -#: src/clients/users.rb:127 +#. translators: command line help text for show action +#: src/clients/users.rb:127 msgid "Show information of selected user" msgstr "선택한 사용자의 정보를 표시합니다." -#. translators: command line help text for ad action -#: src/clients/users.rb:137 +#. translators: command line help text for ad action +#: src/clients/users.rb:137 msgid "Add new user" msgstr "새 사용자를 추가합니다." -#. help text for unknown parameter name -#. help text for unknown parameter name -#: src/clients/users.rb:142 src/clients/users.rb:157 +#. help text for unknown parameter name +#. help text for unknown parameter name +#: src/clients/users.rb:142 src/clients/users.rb:157 msgid "Additional (LDAP) user parameters" msgstr "추가(LDAP) 사용자 매개변수" -#. translators: command line help text for ad action -#: src/clients/users.rb:152 +#. translators: command line help text for ad action +#: src/clients/users.rb:152 msgid "Edit an existing user" msgstr "기존 사용자 편집" -#. translators: command line help text for delete action -#: src/clients/users.rb:167 +#. translators: command line help text for delete action +#: src/clients/users.rb:167 msgid "Delete an existing user (home directory is not removed)" msgstr "기존 사용자를 삭제합니다(홈 디렉토리는 제거되지 않습니다)." -#. translators: command line help text for list local option -#: src/clients/users.rb:175 +#. translators: command line help text for list local option +#: src/clients/users.rb:175 msgid "List of local users" msgstr "로컬 사용자 목록입니다." -#. translators: command line help text for list system option -#: src/clients/users.rb:181 +#. translators: command line help text for list system option +#: src/clients/users.rb:181 msgid "List of system users" msgstr "시스템 사용자 목록입니다." -#. translators: command line help text for list ldap option -#: src/clients/users.rb:187 +#. translators: command line help text for list ldap option +#: src/clients/users.rb:187 msgid "List of LDAP users" msgstr "LDAP 사용자 목록입니다." -#. translators: command line help text for list nis option -#: src/clients/users.rb:193 +#. translators: command line help text for list nis option +#: src/clients/users.rb:193 msgid "List of NIS users" msgstr "NIS 사용자 목록입니다." -#. translators: command line help text for uid option -#: src/clients/users.rb:199 +#. translators: command line help text for uid option +#: src/clients/users.rb:199 msgid "UID of the user" msgstr "사용자의 UID입니다." -#. translators: command line help text for add/gid option -#: src/clients/users.rb:206 +#. translators: command line help text for add/gid option +#: src/clients/users.rb:206 msgid "GID of user's default group" msgstr "사용자의 기본 그룹의 GID입니다." -#. translators: command line help text for username option -#: src/clients/users.rb:213 +#. translators: command line help text for username option +#: src/clients/users.rb:213 msgid "Login name of the user" msgstr "사용자의 로그인 이름입니다." -#. translators: command line help text for add option -#: src/clients/users.rb:220 +#. translators: command line help text for add option +#: src/clients/users.rb:220 msgid "Full name of the user" msgstr "사용자의 전체 이름입니다." -#. translators: command line help text for shell option -#: src/clients/users.rb:227 +#. translators: command line help text for shell option +#: src/clients/users.rb:227 msgid "Login shell of the user" msgstr "사용자의 로그인 셸입니다." -#. translators: command line help text for home option -#: src/clients/users.rb:234 +#. translators: command line help text for home option +#: src/clients/users.rb:234 msgid "Home directory of the user" msgstr "사용자의 홈 디렉토리입니다." -#. translators: command line help text for add + create_home option -#: src/clients/users.rb:241 +#. translators: command line help text for add + create_home option +#: src/clients/users.rb:241 msgid "Do not create home directory for new user" msgstr "새 사용자의 홈 디렉토리를 생성하지 않습니다." -#. translators: command line help text for delete_home option -#: src/clients/users.rb:247 +#. translators: command line help text for delete_home option +#: src/clients/users.rb:247 msgid "Also delete user's home directory" msgstr "또한 사용자의 홈 디렉토리도 삭제합니다." -#. translators: command line help text for add option -#: src/clients/users.rb:253 +#. translators: command line help text for add option +#: src/clients/users.rb:253 msgid "Password of the user" msgstr "사용자의 비밀번호입니다." -#. translators: command line help text for home option -#: src/clients/users.rb:260 +#. translators: command line help text for home option +#: src/clients/users.rb:260 msgid "List of groups of which the user is a member (separated by commas)" msgstr "사용자가 구성원으로 속해 있는 그룹 목록이며 쉼표로 구분됩니다." -#. translators: command line help text for show option -#: src/clients/users.rb:267 +#. translators: command line help text for show option +#: src/clients/users.rb:267 msgid "Type of the user (local, system, nis, ldap)" msgstr "사용자 유형(로컬, 시스템, nis, ldap)" -#. translators: command line help text for new_username option -#: src/clients/users.rb:281 +#. translators: command line help text for new_username option +#: src/clients/users.rb:281 msgid "New login name of the user" msgstr "사용자의 새 로그인 이름입니다." -#. translators: command line help text for new_uid option -#: src/clients/users.rb:288 +#. translators: command line help text for new_uid option +#: src/clients/users.rb:288 msgid "New UID of the user" msgstr "사용자의 새 UID입니다." -#. Checking double user entries -#. (double username or UID) -#. @param [Array] users to check -#: src/clients/users_auto.rb:172 +#. Checking double user entries +#. (double username or UID) +#. @param [Array] users to check +#: src/clients/users_auto.rb:172 msgid "Found users in profile with equal <username>." msgstr "동일한 <username>의 프로파일에서 사용자를 발견했습니다." -#. Do not check users without defined UID. (bnc#996823) -#: src/clients/users_auto.rb:178 +#. Do not check users without defined UID. (bnc#996823) +#: src/clients/users_auto.rb:178 msgid "Found users in profile with equal <uid>." msgstr "동일한 <uid>의 프로파일에서 사용자를 발견했습니다." -#. helptext 1/3 -#: src/clients/users_plugin_ldap_all.rb:105 +#. helptext 1/3 +#: src/clients/users_plugin_ldap_all.rb:105 msgid "" "<p>\n" -"Here, see the table of all allowed attributes for the current LDAP entry " -"that were not set in previous dialogs.</p>" +"Here, see the table of all allowed attributes for the current LDAP entry that were not set in previous dialogs.</p>" msgstr "" "<p>\n" -"여기에서는 현재 LDAP 항목과 관련하여 이전 대화 상자에서 설정하지 못한 모든 특" -"성이 포함된 테이블을 볼 수 있습니다.</p>" +"여기에서는 현재 LDAP 항목과 관련하여 이전 대화 상자에서 설정하지 못한 모든 특성이 포함된 테이블을 볼 수 있습니다.</p>" -#. helptext 1/3 (don't translate objectclass"), -#. %1 is list of values -#: src/clients/users_plugin_ldap_all.rb:111 +#. helptext 1/3 (don't translate objectclass"), +#. %1 is list of values +#: src/clients/users_plugin_ldap_all.rb:111 msgid "" "<p>\n" "The list of attributes is given by the value of \"objectClass\"\n" @@ -288,360 +282,314 @@ "<br>%1).\n" "</p>\n" -#. helptext 3/3 -#: src/clients/users_plugin_ldap_all.rb:122 +#. helptext 3/3 +#: src/clients/users_plugin_ldap_all.rb:122 msgid "" "<p>\n" "Edit each attribute using <b>Edit</b>. Some attributes \n" -"could be required, as defined in the user template in the <b>LDAP Client " -"Module</b>.</p>\n" +"could be required, as defined in the user template in the <b>LDAP Client Module</b>.</p>\n" msgstr "" "<p>\n" "각각의 속성의 편집은 <b>편집</b>을 사용합니다. 몇몇의 속성들은\n" -"<b>LDAP 클라이언트 모듈</b>상의 사용자 템플릿에 정의된 것으로 요구될 수 있습" -"니다.</p>\n" +"<b>LDAP 클라이언트 모듈</b>상의 사용자 템플릿에 정의된 것으로 요구될 수 있습니다.</p>\n" -#. table header 1/2 -#: src/clients/users_plugin_ldap_all.rb:235 +#. table header 1/2 +#: src/clients/users_plugin_ldap_all.rb:235 msgid "Attribute" msgstr "속성" -#. table header 2/2 -#: src/clients/users_plugin_ldap_all.rb:237 +#. table header 2/2 +#: src/clients/users_plugin_ldap_all.rb:237 msgid "Value" msgstr "값" -#. dialog caption -#: src/clients/users_plugin_ldap_all.rb:255 +#. dialog caption +#: src/clients/users_plugin_ldap_all.rb:255 msgid "Additional LDAP Settings" msgstr "추가적인 LDAP 설정" -#. helptext -#: src/clients/users_plugin_ldap_passwordpolicy.rb:91 -msgid "" -"<p>Assign a password policy object to this user in <b>DN of Password Policy " -"object</b>. Activate <b>Reset Password</b> to reset the password of modified " -"user.</p>" -msgstr "" -"<p><b>암호 정책 개체의 DN</b>에서 이 사용자에 암호 정책 개체를 할당하십시오. " -"수정된 사용자의 암호를 다시 설정하려면 <b>암호 다시 설정</b>을 활성화하십시" -"오.</p>" +#. helptext +#: src/clients/users_plugin_ldap_passwordpolicy.rb:91 +msgid "<p>Assign a password policy object to this user in <b>DN of Password Policy object</b>. Activate <b>Reset Password</b> to reset the password of modified user.</p>" +msgstr "<p><b>암호 정책 개체의 DN</b>에서 이 사용자에 암호 정책 개체를 할당하십시오. 수정된 사용자의 암호를 다시 설정하려면 <b>암호 다시 설정</b>을 활성화하십시오.</p>" -#. check box label -#: src/clients/users_plugin_ldap_passwordpolicy.rb:107 +#. check box label +#: src/clients/users_plugin_ldap_passwordpolicy.rb:107 msgid "Use &Default Password Policy" msgstr "기본 비밀번호 정책 사용(&D)" -#. text entry label -#: src/clients/users_plugin_ldap_passwordpolicy.rb:115 +#. text entry label +#: src/clients/users_plugin_ldap_passwordpolicy.rb:115 msgid "DN of &Password Policy object" msgstr "암호 정책 개체의 DN(&P)" -#: src/clients/users_plugin_ldap_passwordpolicy.rb:120 +#: src/clients/users_plugin_ldap_passwordpolicy.rb:120 msgid "&Reset Password" msgstr "암호 다시 설정(&R)" -#. dialog caption -#: src/clients/users_plugin_ldap_passwordpolicy.rb:130 +#. dialog caption +#: src/clients/users_plugin_ldap_passwordpolicy.rb:130 msgid "Password Policy Settings" msgstr "암호 정책 설정" -#. label (date of last password change) -#. label (date of last password change) -#: src/clients/users_plugin_ldap_shadowaccount.rb:118 -#: src/include/users/dialogs.rb:803 +#. label (date of last password change) +#. label (date of last password change) +#: src/clients/users_plugin_ldap_shadowaccount.rb:118 +#: src/include/users/dialogs.rb:803 msgid "Unknown" msgstr "알수 없음`" -#. label (date of last password change) -#. label (date of last password change) -#: src/clients/users_plugin_ldap_shadowaccount.rb:121 -#: src/include/users/dialogs.rb:806 +#. label (date of last password change) +#. label (date of last password change) +#: src/clients/users_plugin_ldap_shadowaccount.rb:121 +#: src/include/users/dialogs.rb:806 msgid "Never" msgstr "변경 안 함" -#. label -#. label -#: src/clients/users_plugin_ldap_shadowaccount.rb:153 -#: src/include/users/dialogs.rb:838 +#. label +#. label +#: src/clients/users_plugin_ldap_shadowaccount.rb:153 +#: src/include/users/dialogs.rb:838 msgid "Last Password Change: %1" msgstr "최종 비밀번호 변경일자: %1" -#. intfield label -#. intfield label -#: src/clients/users_plugin_ldap_shadowaccount.rb:162 -#: src/include/users/dialogs.rb:856 +#. intfield label +#. intfield label +#: src/clients/users_plugin_ldap_shadowaccount.rb:162 +#: src/include/users/dialogs.rb:856 msgid "Days &before Password Expiration to Issue Warning" msgstr "비밀번호 만료 전의 경고 기간(&B)" -#. intfield label -#. intfield label -#: src/clients/users_plugin_ldap_shadowaccount.rb:171 -#: src/include/users/dialogs.rb:865 +#. intfield label +#. intfield label +#: src/clients/users_plugin_ldap_shadowaccount.rb:171 +#: src/include/users/dialogs.rb:865 msgid "Days after Password Expires with Usable &Login" msgstr "비밀번호 만료 후 로그인 허용 기간(&L)" -#. intfield label -#. intfield label -#: src/clients/users_plugin_ldap_shadowaccount.rb:180 -#: src/include/users/dialogs.rb:874 +#. intfield label +#. intfield label +#: src/clients/users_plugin_ldap_shadowaccount.rb:180 +#: src/include/users/dialogs.rb:874 msgid "Ma&ximum Number of Days for the Same Password" msgstr "같은 비밀번호를 사용할 수 있는 최대 기간(&X)" -#. intfield label -#. intfield label -#: src/clients/users_plugin_ldap_shadowaccount.rb:189 -#: src/include/users/dialogs.rb:883 +#. intfield label +#. intfield label +#: src/clients/users_plugin_ldap_shadowaccount.rb:189 +#: src/include/users/dialogs.rb:883 msgid "&Minimum Number of Days for the Same Password" msgstr "같은 비밀번호를 사용할 수 있는 최소 기간(&M)" -#. textentry label -#. textentry label -#: src/clients/users_plugin_ldap_shadowaccount.rb:198 -#: src/include/users/dialogs.rb:893 +#. textentry label +#. textentry label +#: src/clients/users_plugin_ldap_shadowaccount.rb:198 +#: src/include/users/dialogs.rb:893 msgid "Ex&piration Date" msgstr "만료 날짜(&P)" -#. dialog caption -#: src/clients/users_plugin_ldap_shadowaccount.rb:213 +#. dialog caption +#: src/clients/users_plugin_ldap_shadowaccount.rb:213 msgid "Shadow Account Settings" msgstr "섀도 계정 설정" -#. popup text: Don't reorder the letters YYYY-MM-DD!!! -#. The date must stay in this format -#. popup text: Don't reorder the letters YYYY-MM-DD!!! -#. The date must stay in this format -#. popup label - don't reorder the letters YYYY-MM-DD -#. The date must stay in this format -#: src/clients/users_plugin_ldap_shadowaccount.rb:235 -#: src/include/users/dialogs.rb:1676 src/include/users/widgets.rb:1665 +#. popup text: Don't reorder the letters YYYY-MM-DD!!! +#. The date must stay in this format +#. popup text: Don't reorder the letters YYYY-MM-DD!!! +#. The date must stay in this format +#. popup label - don't reorder the letters YYYY-MM-DD +#. The date must stay in this format +#: src/clients/users_plugin_ldap_shadowaccount.rb:235 +#: src/include/users/dialogs.rb:1676 src/include/users/widgets.rb:1665 msgid "The expiration date must be in the format YYYY-MM-DD." msgstr "만료 날짜는 YYYY-MM-DD 형식이어야 합니다." -#. helptext for quota -#: src/clients/users_plugin_quota.rb:97 +#. helptext for quota +#: src/clients/users_plugin_quota.rb:97 msgid "<p>Configure quota settings for the user on selected file systems.</p>" msgstr "<p>선택한 파일 시스템의 사용자에 대한 할당량 설정을 구성합니다.</p>" -#. helptext for quota, cont. -#: src/clients/users_plugin_quota.rb:101 +#. helptext for quota, cont. +#: src/clients/users_plugin_quota.rb:101 msgid "" "<p>Define a size limit by specifying the number of 1 KB blocks the\n" -"user may have on this file system. Additionally, you can define an inode " -"limit specifying the number of inodes the user may have on the file system.\n" +"user may have on this file system. Additionally, you can define an inode limit specifying the number of inodes the user may have on the file system.</p>\n" msgstr "" "<p>1KB 블록 단위로 이 파일 시스템의 사용자 크기 제한을 지정하십시오.\n" -"참고로 파일 시스템에 inode(파일이나 디렉토리 등의 합계) 단위로 제한할 수도 있" -"습니다.</p>\n" +"참고로 파일 시스템에 inode(파일이나 디렉토리 등의 합계) 단위로 제한할 수도 있습니다.</p>\n" -#. helptext for quota, cont. -#: src/clients/users_plugin_quota.rb:105 -msgid "" -"<p>You can specify both soft and hard limits for size and number of inodes. " -"The soft limits define a warning level at which users are informed they are " -"nearing their limit, whereas the hard limits define the limit at which write " -"requests are denied.</p>" -msgstr "" -"<p>크기 및 inode 개수 제한에 대한 소프트 한도와 하드 한도를 지정할 수 있습니" -"다. 소프트 한도는 제한에 도달하면 알려주는 경고 레벨을 정의하고, 하드 한도는 " -"쓰기 요청이 거부되는 제한을 정의합니다.</p>" +#. helptext for quota, cont. +#: src/clients/users_plugin_quota.rb:105 +msgid "<p>You can specify both soft and hard limits for size and number of inodes. The soft limits define a warning level at which users are informed they are nearing their limit, whereas the hard limits define the limit at which write requests are denied.</p>" +msgstr "<p>크기 및 inode 개수 제한에 대한 소프트 한도와 하드 한도를 지정할 수 있습니다. 소프트 한도는 제한에 도달하면 알려주는 경고 레벨을 정의하고, 하드 한도는 쓰기 요청이 거부되는 제한을 정의합니다.</p>" -#. helptext for quota, cont. -#: src/clients/users_plugin_quota.rb:109 -msgid "" -"<p>As soon as the user has reached the soft limit, the input fields for the " -"grace interval are activated. Specify the time period for which the user is " -"allowed to exceed the soft limits set above. The countdown of the grace " -"interval starts immediately.</p>" -msgstr "" -"<p>사용자가 소프트 한도에 도달하면 유예 기간 입력 필드가 활성화됩니다. 이 항" -"목에는 사용자에게 허용된 소프트 한도 설정을 시간으로 지정합니다. 유예 기간의 " -"카운트다운은 즉시 시작됩니다.</p>" +#. helptext for quota, cont. +#: src/clients/users_plugin_quota.rb:109 +msgid "<p>As soon as the user has reached the soft limit, the input fields for the grace interval are activated. Specify the time period for which the user is allowed to exceed the soft limits set above. The countdown of the grace interval starts immediately.</p>" +msgstr "<p>사용자가 소프트 한도에 도달하면 유예 기간 입력 필드가 활성화됩니다. 이 항목에는 사용자에게 허용된 소프트 한도 설정을 시간으로 지정합니다. 유예 기간의 카운트다운은 즉시 시작됩니다.</p>" -#. helptext for quota -#: src/clients/users_plugin_quota.rb:115 +#. helptext for quota +#: src/clients/users_plugin_quota.rb:115 msgid "<p>Configure quota settings for the group on selected file systems.</p>" msgstr "<p>선택한 파일 시스템의 그룹에 대한 할당량 설정을 구성합니다.</p>" -#. helptext for quota, cont. -#: src/clients/users_plugin_quota.rb:119 +#. helptext for quota, cont. +#: src/clients/users_plugin_quota.rb:119 msgid "" "<p>Define a size limit by specifying the number of 1 kB blocks the\n" -"group may use on this file system. Additionally, you can define an inode " -"limit specifying the number of inodes the group may use on the file system.\n" +"group may use on this file system. Additionally, you can define an inode limit specifying the number of inodes the group may use on the file system.</p>\n" msgstr "" "<p>이 파일 시스템에서 그룹이 사용할 수 있는 1kB 블록 수를\n" -"지정하여 크기 제한을 정의합니다. 또한 파일 시스템에서 그룹이 사용할 수 있는 " -"inode 수를 지정하여 inode 한도를 정의할 수 있습니다.</p>\n" +"지정하여 크기 제한을 정의합니다. 또한 파일 시스템에서 그룹이 사용할 수 있는 inode 수를 지정하여 inode 한도를 정의할 수 있습니다.</p>\n" -#. helptext for quota, cont. -#: src/clients/users_plugin_quota.rb:123 -msgid "" -"<p>You can specify both soft and hard limits for size and number of inodes. " -"The soft limits define a warning level at which groups are informed they are " -"nearing their limit, whereas the hard limits define the limit at which write " -"requests are denied.</p>" -msgstr "" -"<p>크기 및 inode 개수 제한에 대한 소프트 한도와 하드 한도를 지정할 수 있습니" -"다. 소프트 한도는 제한에 도달하면 알려주는 경고 레벨을 정의하고, 하드 한도는 " -"쓰기 요청이 거부되는 제한을 정의합니다.</p>" +#. helptext for quota, cont. +#: src/clients/users_plugin_quota.rb:123 +msgid "<p>You can specify both soft and hard limits for size and number of inodes. The soft limits define a warning level at which groups are informed they are nearing their limit, whereas the hard limits define the limit at which write requests are denied.</p>" +msgstr "<p>크기 및 inode 개수 제한에 대한 소프트 한도와 하드 한도를 지정할 수 있습니다. 소프트 한도는 제한에 도달하면 알려주는 경고 레벨을 정의하고, 하드 한도는 쓰기 요청이 거부되는 제한을 정의합니다.</p>" -#. helptext for quota, cont. -#: src/clients/users_plugin_quota.rb:127 -msgid "" -"<p>As soon as the group has reached the soft limit, the input fields for the " -"grace interval are activated. Specify the time period for which the group is " -"allowed to exceed the soft limits set above. The countdown of the grace " -"interval starts immediately.</p>" -msgstr "" -"<p>그룹이 소프트 한도에 도달하면 유예 기간 입력 필드가 활성화됩니다. 그룹에 " -"허용된 소프트 한도 설정을 시간으로 지정합니다. 유예 기간의 카운트다운은 즉시 " -"시작됩니다.</p>" +#. helptext for quota, cont. +#: src/clients/users_plugin_quota.rb:127 +msgid "<p>As soon as the group has reached the soft limit, the input fields for the grace interval are activated. Specify the time period for which the group is allowed to exceed the soft limits set above. The countdown of the grace interval starts immediately.</p>" +msgstr "<p>그룹이 소프트 한도에 도달하면 유예 기간 입력 필드가 활성화됩니다. 그룹에 허용된 소프트 한도 설정을 시간으로 지정합니다. 유예 기간의 카운트다운은 즉시 시작됩니다.</p>" -#. combo box label -#: src/clients/users_plugin_quota.rb:188 +#. combo box label +#: src/clients/users_plugin_quota.rb:188 msgid "&File System" msgstr "파일 시스템(&F)" -#. frame label -#: src/clients/users_plugin_quota.rb:195 +#. frame label +#: src/clients/users_plugin_quota.rb:195 msgid "Size Limits" msgstr "크기 제한" -#. intfield label -#: src/clients/users_plugin_quota.rb:203 +#. intfield label +#: src/clients/users_plugin_quota.rb:203 msgid "&Soft limit" msgstr "소프트 한도(&S)" -#. intfield label -#: src/clients/users_plugin_quota.rb:211 +#. intfield label +#: src/clients/users_plugin_quota.rb:211 msgid "&Hard limit" msgstr "하드 한도(&H)" -#. frame label -#: src/clients/users_plugin_quota.rb:231 +#. frame label +#: src/clients/users_plugin_quota.rb:231 msgid "I-nodes Limit" msgstr "Inode 한도" -#. intfield label -#: src/clients/users_plugin_quota.rb:238 +#. intfield label +#: src/clients/users_plugin_quota.rb:238 msgid "S&oft limit" msgstr "소프트 한도(&O)" -#. intfield label -#: src/clients/users_plugin_quota.rb:246 +#. intfield label +#: src/clients/users_plugin_quota.rb:246 msgid "Har&d limit" msgstr "하드 한도(&D)" -#. error popup -#: src/clients/users_plugin_quota.rb:306 +#. error popup +#: src/clients/users_plugin_quota.rb:306 msgid "Soft limit cannot be higher than the hard limit." msgstr "소프트 한도는 하드 한도보다 클 수 없습니다." -#. helper for creating widget with time settings -#. @param [String] id string that preceedes the subwidgets id's -#. @param [Fixnum] seconds number of seconds to be shown in the widget -#: src/clients/users_plugin_quota.rb:496 -#: src/include/users/ldap_dialogs.rb:330 +#. helper for creating widget with time settings +#. @param [String] id string that preceedes the subwidgets id's +#. @param [Fixnum] seconds number of seconds to be shown in the widget +#: src/clients/users_plugin_quota.rb:496 src/include/users/ldap_dialogs.rb:330 msgid "Days" msgstr "일" -#: src/clients/users_plugin_quota.rb:497 -#: src/include/users/ldap_dialogs.rb:331 +#: src/clients/users_plugin_quota.rb:497 src/include/users/ldap_dialogs.rb:331 msgid "Hours" msgstr "시" -#: src/clients/users_plugin_quota.rb:498 -#: src/include/users/ldap_dialogs.rb:332 +#: src/clients/users_plugin_quota.rb:498 src/include/users/ldap_dialogs.rb:332 msgid "Minutes" msgstr "분" -#: src/clients/users_plugin_quota.rb:499 -#: src/include/users/ldap_dialogs.rb:333 +#: src/clients/users_plugin_quota.rb:499 src/include/users/ldap_dialogs.rb:333 msgid "Seconds" msgstr "초" -#. password entering label -#: src/include/users/cmdline.rb:55 +#. password entering label +#: src/include/users/cmdline.rb:55 msgid "LDAP Server Password:" msgstr "LDAP 서버 비밀번호:" -#. #-#-#-#-# users.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. error message -#. error message -#. error message -#. #-#-#-#-# users.xgettext.pot #-#-#-#-# -#. error message -#: src/include/users/cmdline.rb:226 src/include/users/cmdline.rb:386 -#: src/include/users/cmdline.rb:431 src/modules/YaPI/USERS.pm:1044 -#: src/modules/YaPI/USERS.pm:2491 +#. #-#-#-#-# users.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. error message +#. error message +#. error message +#. #-#-#-#-# users.xgettext.pot #-#-#-#-# +#. error message +#: src/include/users/cmdline.rb:226 src/include/users/cmdline.rb:386 +#: src/include/users/cmdline.rb:431 src/modules/YaPI/USERS.pm:1044 +#: src/modules/YaPI/USERS.pm:2491 msgid "There is no such user." msgstr "지정한 사용자가 없습니다." -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:233 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:233 msgid "Full Name:" msgstr "전체 이름:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:237 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:237 msgid "Login Name:" msgstr "로그인 이름:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:241 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:241 msgid "Home Directory:" msgstr "홈 디렉토리:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:245 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:245 msgid "Login Shell:" msgstr "로그인 셸:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:249 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:249 msgid "UID:" msgstr "UID:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:253 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:253 msgid "Default Group:" msgstr "기본 그룹:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:257 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:257 msgid "List of Groups:" msgstr "그룹 목록:" -#. error message -#: src/include/users/cmdline.rb:285 +#. error message +#: src/include/users/cmdline.rb:285 msgid "Enter a user name." msgstr "사용자 이름을 입력하십시오." -#. question on command line -#: src/include/users/cmdline.rb:306 +#. question on command line +#: src/include/users/cmdline.rb:306 msgid "Password for New User:" msgstr "새 사용자에 대한 비밀번호:" -#. question on command line -#: src/include/users/cmdline.rb:309 +#. question on command line +#: src/include/users/cmdline.rb:309 msgid "Confirm the password:" msgstr "암호 확인:" -#. error message -#: src/include/users/cmdline.rb:314 +#. error message +#: src/include/users/cmdline.rb:314 msgid "Passwords do not match. Try again." msgstr "암호가 일치하지 않습니다. 다시 하십시오." -#. error message -#: src/include/users/cmdline.rb:318 +#. error message +#: src/include/users/cmdline.rb:318 msgid "Passwords do not match. Exiting." msgstr "암호가 일치하지 않습니다. 종료 중." -#. error popup -#: src/include/users/cmdline.rb:399 +#. error popup +#: src/include/users/cmdline.rb:399 msgid "" "You can not delete this user, because the user is present.\n" "Please log off the user first." @@ -649,53 +597,53 @@ "사용자가 사용중이라 지울수 없습니다.\n" "먼저, 사용자 로그오프를 하십시오" -#. #-#-#-#-# users.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# -#. error message -#. error message -#. error message -#. #-#-#-#-# users.xgettext.pot #-#-#-#-# -#. error message -#: src/include/users/cmdline.rb:558 src/include/users/cmdline.rb:625 -#: src/include/users/cmdline.rb:701 src/modules/YaPI/USERS.pm:1832 -#: src/modules/YaPI/USERS.pm:1995 src/modules/YaPI/USERS.pm:2158 +#. #-#-#-#-# users.rxgettext.pot (PACKAGE VERSION) #-#-#-#-# +#. error message +#. error message +#. error message +#. #-#-#-#-# users.xgettext.pot #-#-#-#-# +#. error message +#: src/include/users/cmdline.rb:558 src/include/users/cmdline.rb:625 +#: src/include/users/cmdline.rb:701 src/modules/YaPI/USERS.pm:1832 +#: src/modules/YaPI/USERS.pm:1995 src/modules/YaPI/USERS.pm:2158 msgid "There is no such group." msgstr "지정한 그룹이 없습니다." -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:565 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:565 msgid "Group Name:" msgstr "그룹 이름:" -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:569 +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:569 msgid "GID:" msgstr "GID:" -#. label shown at command line (user attribute) -#. label shown at command line (user attribute) -#: src/include/users/cmdline.rb:573 src/include/users/cmdline.rb:577 +#. label shown at command line (user attribute) +#. label shown at command line (user attribute) +#: src/include/users/cmdline.rb:573 src/include/users/cmdline.rb:577 msgid "List of Members:" msgstr "구성원 목록:" -#. error message -#: src/include/users/cmdline.rb:637 +#. error message +#: src/include/users/cmdline.rb:637 msgid "Enter a group name." msgstr "그룹 이름을 입력하십시오." -#. popup text -#: src/include/users/complex.rb:89 +#. popup text +#: src/include/users/complex.rb:89 msgid "Really abort the writing process?" msgstr "정말로 기록을 중단하시겠습니까?" -#. The login name contains uppercase 1/3 -#: src/include/users/dialogs.rb:69 +#. The login name contains uppercase 1/3 +#: src/include/users/dialogs.rb:69 msgid "" "<p>\n" "You have used uppercase letters in the user login entry.</p>" msgstr "사용자 로그인 항목 안에서 대문자를 사용할 수 있습니다.</p> " -#. The login name contains uppercase 2/3 -#: src/include/users/dialogs.rb:73 +#. The login name contains uppercase 2/3 +#: src/include/users/dialogs.rb:73 msgid "" "<p>This could cause problems with delivering mail\n" "to this user, because mail systems generally do not\n" @@ -707,13 +655,13 @@ " 메일을 전송할 때 문제가 생길 수 있습니다.<br>\n" " 별칭 테이블을 편집하여 이 문제를 해결할 수 있습니다.</p>\n" -#. The login name contains uppercase 3/3 -#: src/include/users/dialogs.rb:80 +#. The login name contains uppercase 3/3 +#: src/include/users/dialogs.rb:80 msgid "<p>Really use the entered value?</p>" msgstr "<p>정말로 입력된 값을 사용하시겠습니까?</p>" -#. password entry label -#: src/include/users/dialogs.rb:124 +#. password entry label +#: src/include/users/dialogs.rb:124 msgid "" "To access the data required to modify\n" "the encryption settings for this user,\n" @@ -723,16 +671,16 @@ "수정하는 데 필요한 데이터에 액세스하려면\n" " 해당 사용자의 현재 암호를 입력하십시오." -#. The two user password information do not match -#. error popup -#. The two group password information do not match -#. error popup -#. The two group password information do not match -#. error popup -#. report misspellings of the password -#: src/include/users/dialogs.rb:146 src/include/users/dialogs.rb:1247 -#: src/include/users/dialogs.rb:2364 -#: src/lib/users/dialogs/inst_user_first.rb:473 src/lib/users/widgets.rb:102 +#. The two user password information do not match +#. error popup +#. The two group password information do not match +#. error popup +#. The two group password information do not match +#. error popup +#. report misspellings of the password +#: src/include/users/dialogs.rb:146 src/include/users/dialogs.rb:1247 +#: src/include/users/dialogs.rb:2364 +#: src/lib/users/dialogs/inst_user_first.rb:473 src/lib/users/widgets.rb:102 msgid "" "The passwords do not match.\n" "Try again." @@ -740,15 +688,14 @@ "비밀번호가 일치하지 않습니다.\n" "다시 시도하십시오." -#. yes/no popup label, %1,%2 are file paths -#: src/include/users/dialogs.rb:344 +#. yes/no popup label, %1,%2 are file paths +#: src/include/users/dialogs.rb:344 msgid "" "Crypted directory image and key files\n" "'%1' and '%2'\n" "were found. Use them for current user?\n" "\n" -"This means that data from this image will be used instead of current home " -"directory." +"This means that data from this image will be used instead of current home directory." msgstr "" "암호화된 디렉토리 이미지 및 키 파일\n" "'%1' 및 '%2'이\n" @@ -756,8 +703,8 @@ "\n" "즉, 현재 홈 디렉토리 대신 이 이미지의 데이터가 사용됩니다." -#. popup label, %1 is path to directory -#: src/include/users/dialogs.rb:369 +#. popup label, %1 is path to directory +#: src/include/users/dialogs.rb:369 msgid "" "The home directory (%1) already exists.\n" "Use it anyway?" @@ -765,125 +712,125 @@ "홈 디렉토리(%1)가 이미 있습니다.\n" "사용하시겠습니까?" -#. checkbox label -#: src/include/users/dialogs.rb:377 +#. checkbox label +#: src/include/users/dialogs.rb:377 msgid "&Change directory owner" msgstr "디렉토리 소유자 변경(&C)" -#. text entry -#. text entry -#: src/include/users/dialogs.rb:403 -#: src/lib/users/dialogs/inst_user_first.rb:585 +#. text entry +#. text entry +#: src/include/users/dialogs.rb:403 +#: src/lib/users/dialogs/inst_user_first.rb:585 msgid "User's &Full Name" msgstr "사용자의 전체 이름(&F)" -#. text entry -#: src/include/users/dialogs.rb:411 +#. text entry +#: src/include/users/dialogs.rb:411 msgid "&First Name" msgstr "이름(&F)" -#. text entry -#: src/include/users/dialogs.rb:414 +#. text entry +#: src/include/users/dialogs.rb:414 msgid "&Last Name" msgstr "성(&L)" -#. label text -#: src/include/users/dialogs.rb:422 +#. label text +#: src/include/users/dialogs.rb:422 msgid "For remote users, only additional group memberships can be changed." msgstr "원격 사용자의 경우 추가 그룹 구성원 정보만 변경할 수 있습니다." -#. input field for login name -#. input field for login name -#: src/include/users/dialogs.rb:433 -#: src/lib/users/dialogs/inst_user_first.rb:592 +#. input field for login name +#. input field for login name +#: src/include/users/dialogs.rb:433 +#: src/lib/users/dialogs/inst_user_first.rb:592 msgid "&Username" msgstr "사용자 이름(&U)" -#. checkbox label -#: src/include/users/dialogs.rb:446 +#. checkbox label +#: src/include/users/dialogs.rb:446 msgid "Receive S&ystem Mail" msgstr "시스템 메일 수신(&Y)" -#. checkbox label -#: src/include/users/dialogs.rb:456 +#. checkbox label +#: src/include/users/dialogs.rb:456 msgid "A&utomatic Login" msgstr "자동 로그인(&U)" -#. checkbox label -#. checkbox label -#: src/include/users/dialogs.rb:470 -#: src/lib/users/dialogs/inst_user_first.rb:616 +#. checkbox label +#. checkbox label +#: src/include/users/dialogs.rb:470 +#: src/lib/users/dialogs/inst_user_first.rb:616 msgid "U&se this password for system administrator" msgstr "이 비밀번호를 시스템 관리자 비밀번호로 사용(&S)" -#. check box label -#: src/include/users/dialogs.rb:480 +#. check box label +#: src/include/users/dialogs.rb:480 msgid "D&isable User Login" msgstr "사용자 로그인 비활성화(&I)" -#. push button -#: src/include/users/dialogs.rb:509 +#. push button +#: src/include/users/dialogs.rb:509 msgid "User &Management" msgstr "사용자 관리(&M)" -#. group name is not known (combobox item): -#: src/include/users/dialogs.rb:615 +#. group name is not known (combobox item): +#: src/include/users/dialogs.rb:615 msgid "(Unknown)" msgstr "(알 수 없음)" -#. combobox label -#: src/include/users/dialogs.rb:623 +#. combobox label +#: src/include/users/dialogs.rb:623 msgid "De&fault Group" msgstr "기본 그룹(&F)" -#. combobox label -#: src/include/users/dialogs.rb:630 +#. combobox label +#: src/include/users/dialogs.rb:630 msgid "Login &Shell" msgstr "로그인 쉘(&S)" -#. textentry label -#: src/include/users/dialogs.rb:641 +#. textentry label +#: src/include/users/dialogs.rb:641 msgid "Addi&tional User Information" msgstr "추가 사용자 정보(&T)" -#. button label -#: src/include/users/dialogs.rb:650 +#. button label +#: src/include/users/dialogs.rb:650 msgid "B&rowse..." msgstr "찾아보기(&R)..." -#. textentry label -#: src/include/users/dialogs.rb:656 +#. textentry label +#: src/include/users/dialogs.rb:656 msgid "&Home Directory" msgstr "홈 디렉토리(&H)" -#. check box label -#: src/include/users/dialogs.rb:665 +#. check box label +#: src/include/users/dialogs.rb:665 msgid "&Move to New Location" msgstr "새 위치로 이동(&M)" -#. textentry label -#: src/include/users/dialogs.rb:678 +#. textentry label +#: src/include/users/dialogs.rb:678 msgid "Home Directory &Permission Mode" msgstr "홈 디렉토리 권한 모드(&P)" -#. check box label -#: src/include/users/dialogs.rb:684 +#. check box label +#: src/include/users/dialogs.rb:684 msgid "E&mpty Home" msgstr "비어 있는 홈(&M)" -#. check box label -#: src/include/users/dialogs.rb:698 +#. check box label +#: src/include/users/dialogs.rb:698 msgid "&Use Encrypted Home Directory" msgstr "암호화된 홈 디렉토리 사용(&U)" -#. for max value, see bug 244631 :-) -#. IntField label -#: src/include/users/dialogs.rb:707 +#. for max value, see bug 244631 :-) +#. IntField label +#: src/include/users/dialogs.rb:707 msgid "&Directory Size in MB" msgstr "디렉토리 크기(MB)(&D)" -#. label -#: src/include/users/dialogs.rb:721 +#. label +#: src/include/users/dialogs.rb:721 msgid "" "For remote users, only additional \n" "group memberships can be changed." @@ -891,109 +838,109 @@ "원격 사용자의 경우 추가 그룹\n" "구성원만 변경할 수 있습니다." -#. textentry label -#: src/include/users/dialogs.rb:738 +#. textentry label +#: src/include/users/dialogs.rb:738 msgid "User &ID (uid)" msgstr "사용자 ID (uid)(&I)" -#. selection box label -#: src/include/users/dialogs.rb:759 +#. selection box label +#: src/include/users/dialogs.rb:759 msgid "Additional Gr&oups" msgstr "추가 그룹(&O)" -#. selection box label -#: src/include/users/dialogs.rb:766 +#. selection box label +#: src/include/users/dialogs.rb:766 msgid "&LDAP Groups" msgstr "LDAP 그룹(&L)" -#. check box label -#: src/include/users/dialogs.rb:848 +#. check box label +#: src/include/users/dialogs.rb:848 msgid "Force Password Change" msgstr "강제 비밀번호 변경" -#. table header -#. table header -#: src/include/users/dialogs.rb:935 src/include/users/dialogs.rb:2217 +#. table header +#. table header +#: src/include/users/dialogs.rb:935 src/include/users/dialogs.rb:2217 msgid "Plug-In Description" msgstr "플러그인 설명" -#. pushbutton label -#. pushbutton label -#: src/include/users/dialogs.rb:944 src/include/users/dialogs.rb:2226 +#. pushbutton label +#. pushbutton label +#: src/include/users/dialogs.rb:944 src/include/users/dialogs.rb:2226 msgid "Add &or Remove Plug-In" msgstr "플러그인 추가 또는 제거(&O)" -#. pushbutton label -#. pushbutton label -#: src/include/users/dialogs.rb:947 src/include/users/dialogs.rb:2229 +#. pushbutton label +#. pushbutton label +#: src/include/users/dialogs.rb:947 src/include/users/dialogs.rb:2229 msgid "&Launch" msgstr "시작(&L)" -#. dialog caption: -#: src/include/users/dialogs.rb:959 +#. dialog caption: +#: src/include/users/dialogs.rb:959 msgid "New Local User" msgstr "새 로컬 사용자" -#. dialog caption: -#: src/include/users/dialogs.rb:961 +#. dialog caption: +#: src/include/users/dialogs.rb:961 msgid "New System User" msgstr "새 시스템 사용자" -#. dialog caption: -#: src/include/users/dialogs.rb:963 +#. dialog caption: +#: src/include/users/dialogs.rb:963 msgid "New LDAP User" msgstr "새 LDAP 사용자" -#. dialog caption: -#: src/include/users/dialogs.rb:967 +#. dialog caption: +#: src/include/users/dialogs.rb:967 msgid "Existing Local User" msgstr "기존 로컬 사용자" -#. dialog caption: -#: src/include/users/dialogs.rb:969 +#. dialog caption: +#: src/include/users/dialogs.rb:969 msgid "Existing System User" msgstr "기존 시스템 사용자" -#. dialog caption: -#: src/include/users/dialogs.rb:971 +#. dialog caption: +#: src/include/users/dialogs.rb:971 msgid "Existing LDAP User" msgstr "기존 LDAP 사용자" -#. dialog caption: -#: src/include/users/dialogs.rb:973 +#. dialog caption: +#: src/include/users/dialogs.rb:973 msgid "Existing NIS User" msgstr "기존 NIS 사용자" -#. tab label -#: src/include/users/dialogs.rb:979 +#. tab label +#: src/include/users/dialogs.rb:979 msgid "Us&er Data" msgstr "사용자 데이터(&E)" -#. tab label -#: src/include/users/dialogs.rb:981 +#. tab label +#: src/include/users/dialogs.rb:981 msgid "&Details" msgstr "세부 사항(&D)" -#. tab label -#: src/include/users/dialogs.rb:988 +#. tab label +#: src/include/users/dialogs.rb:988 msgid "Pass&word Settings" msgstr "비밀번호 설정(&W)" -#. tab label -#. tab label -#: src/include/users/dialogs.rb:1019 src/include/users/dialogs.rb:2273 +#. tab label +#. tab label +#: src/include/users/dialogs.rb:1019 src/include/users/dialogs.rb:2273 msgid "Plu&g-Ins" msgstr "플러그인(&G)" -#. The user login field is empty, this is allowed if the -#. system is part of a network with (e.g.) NIS user management. -#. yes-no popup headline -#: src/include/users/dialogs.rb:1112 +#. The user login field is empty, this is allowed if the +#. system is part of a network with (e.g.) NIS user management. +#. yes-no popup headline +#: src/include/users/dialogs.rb:1112 msgid "Empty User Login" msgstr "사용자 로그인 비워 두기" -#. yes-no popup contents -#: src/include/users/dialogs.rb:1114 +#. yes-no popup contents +#: src/include/users/dialogs.rb:1114 msgid "" "Leaving the user name empty only makes sense\n" "in a network environment with an authentication server.\n" @@ -1003,21 +950,21 @@ "사용자 이름을 비워 둘 수 있습니다.\n" " 비워 두시겠습니까?" -#. last part of message popup -#. last part of message popup -#. User can confirm using "invalid" password confirming all the errors -#: src/include/users/dialogs.rb:1269 src/include/users/dialogs.rb:2391 -#: src/lib/users/dialogs/inst_user_first.rb:485 src/lib/users/widgets.rb:127 +#. last part of message popup +#. last part of message popup +#. User can confirm using "invalid" password confirming all the errors +#: src/include/users/dialogs.rb:1269 src/include/users/dialogs.rb:2391 +#: src/lib/users/dialogs/inst_user_first.rb:485 src/lib/users/widgets.rb:127 msgid "Really use this password?" msgstr "이 비밀번호를 사용하시겠습니까?" -#. popup question -#: src/include/users/dialogs.rb:1308 +#. popup question +#: src/include/users/dialogs.rb:1308 msgid "Change home directory to %1?" msgstr "홈 디렉토리를 %1으(로) 변경하시겠습니까?" -#. error popup -#: src/include/users/dialogs.rb:1430 +#. error popup +#: src/include/users/dialogs.rb:1430 msgid "" "The home directory for this user cannot be decrypted,\n" "because the user is currently logged in.\n" @@ -1027,13 +974,13 @@ "홈 디렉토리 암호화를 해제할 수 없습니다.\n" "먼저 사용자를 로그아웃하십시오." -#. error popup -#: src/include/users/dialogs.rb:1577 +#. error popup +#: src/include/users/dialogs.rb:1577 msgid "Enter the size for the home directory." msgstr "홈 디렉토리에 대한 크기를 입력하십시오." -#. error popup -#: src/include/users/dialogs.rb:1583 +#. error popup +#: src/include/users/dialogs.rb:1583 msgid "" "\n" "Directory cannot be encrypted." @@ -1041,104 +988,101 @@ "\n" "디렉토리를 암호화할 수 없습니다." -#. popup message -#. popup message -#: src/include/users/dialogs.rb:1750 src/include/users/dialogs.rb:2485 +#. popup message +#. popup message +#: src/include/users/dialogs.rb:1750 src/include/users/dialogs.rb:2485 msgid "This plug-in cannot be removed." msgstr "이 플러그인은 제거할 수 없습니다." -#. popup text -#: src/include/users/dialogs.rb:2005 +#. popup text +#: src/include/users/dialogs.rb:2005 msgid "Now you have added a new user." msgstr "새 사용자를 추가했습니다." -#. dialog caption: -#: src/include/users/dialogs.rb:2071 +#. dialog caption: +#: src/include/users/dialogs.rb:2071 msgid "New Local Group" msgstr "새 로컬 그룹" -#. dialog caption: -#: src/include/users/dialogs.rb:2073 +#. dialog caption: +#: src/include/users/dialogs.rb:2073 msgid "New System Group" msgstr "새 시스템 그룹" -#. dialog caption: -#: src/include/users/dialogs.rb:2075 +#. dialog caption: +#: src/include/users/dialogs.rb:2075 msgid "New LDAP Group" msgstr "새 LDAP 그룹" -#. dialog caption: -#: src/include/users/dialogs.rb:2079 +#. dialog caption: +#: src/include/users/dialogs.rb:2079 msgid "Existing Local Group" msgstr "기존 로컬 그룹" -#. dialog caption: -#: src/include/users/dialogs.rb:2081 +#. dialog caption: +#: src/include/users/dialogs.rb:2081 msgid "Existing System Group" msgstr "기존 시스템 그룹" -#. dialog caption: -#: src/include/users/dialogs.rb:2083 +#. dialog caption: +#: src/include/users/dialogs.rb:2083 msgid "Existing LDAP Group" msgstr "기존 LDAP 그룹" -#. textentry label -#: src/include/users/dialogs.rb:2145 +#. textentry label +#: src/include/users/dialogs.rb:2145 msgid "Group &Name" msgstr "그룹 이름(&N)" -#. textentry label -#: src/include/users/dialogs.rb:2154 +#. textentry label +#: src/include/users/dialogs.rb:2154 msgid "Group &ID (gid)" msgstr "그룹 ID (gid)(&I)" -#. selection box label -#. add items later (when there is a huge amount of them, it takes -#. long time to display, so display at least the rest of the dialog) -#: src/include/users/dialogs.rb:2174 src/include/users/dialogs.rb:2593 +#. selection box label +#. add items later (when there is a huge amount of them, it takes +#. long time to display, so display at least the rest of the dialog) +#: src/include/users/dialogs.rb:2174 src/include/users/dialogs.rb:2593 msgid "Group &Members" msgstr "그룹 구성원(&M)" -#. tab label -#: src/include/users/dialogs.rb:2271 +#. tab label +#: src/include/users/dialogs.rb:2271 msgid "Group &Data" msgstr "그룹 데이터(&D)" -#. encryption type -#. encryption type -#. TRANSLATORS: encryption type -#: src/include/users/helps.rb:52 src/include/users/helps.rb:54 -#: src/lib/users/encryption_method.rb:51 +#. encryption type +#. encryption type +#. TRANSLATORS: encryption type +#: src/include/users/helps.rb:52 src/include/users/helps.rb:54 +#: src/lib/users/encryption_method.rb:51 msgid "DES" msgstr "DES" -#. encryption type -#. TRANSLATORS: encryption type -#: src/include/users/helps.rb:56 src/lib/users/encryption_method.rb:53 +#. encryption type +#. TRANSLATORS: encryption type +#: src/include/users/helps.rb:56 src/lib/users/encryption_method.rb:53 msgid "MD5" msgstr "MD5" -#. help text 1/4 -#: src/include/users/helps.rb:62 +#. help text 1/4 +#: src/include/users/helps.rb:62 msgid "" "<p>\n" "When entering a password, distinguish between uppercase and\n" -"lowercase. Passwords should not contain any accented characters or " -"umlauts. \n" +"lowercase. Passwords should not contain any accented characters or umlauts. \n" "</p>\n" msgstr "" "<p>\n" "비밀번호를 입력할 경우에는 대문자와 소문자를 구분하여 사용하십시오.\n" -"비밀번호에는 액센트 문자 또는 움라우트와 같은 특수 문자를 사용할 수 없습니" -"다.\n" +"비밀번호에는 액센트 문자 또는 움라우트와 같은 특수 문자를 사용할 수 없습니다.\n" "</p>\n" -#. help text 2/4 %1 is encryption type, %2,%3 numbers -#: src/include/users/helps.rb:73 +#. help text 2/4 %1 is encryption type, %2,%3 numbers +#: src/include/users/helps.rb:73 msgid "" "<p>\n" -"With the current password encryption (%1), the password length should be " -"between\n" +"With the current password encryption (%1), the password length should be between\n" " %2 and %3 characters.\n" "</p>" msgstr "" @@ -1147,8 +1091,8 @@ "%2와 %3자 이내로 합니다.\n" "</p>" -#. help text 4/4 -#: src/include/users/helps.rb:90 src/lib/users/dialogs/inst_user_first.rb:164 +#. help text 4/4 +#: src/include/users/helps.rb:90 src/lib/users/dialogs/inst_user_first.rb:164 msgid "" "<p>\n" "To ensure that the password was entered correctly,\n" @@ -1157,12 +1101,11 @@ msgstr "" "<p>\n" "현재 입력하신 패스워드의 보안을 위해, 비밀번호는 두번째 필드에\n" -"정확히 다시 입력합니다. 설정하신 비밀번호를 잊지 않도록 주의하시기 바랍니" -"다!\n" +"정확히 다시 입력합니다. 설정하신 비밀번호를 잊지 않도록 주의하시기 바랍니다!\n" "</p>\n" -#. Help text 0/6 -#: src/include/users/helps.rb:103 +#. Help text 0/6 +#: src/include/users/helps.rb:103 msgid "" "<p>\n" "Here, set default values to use when creating new local or system users.\n" @@ -1172,8 +1115,8 @@ "여기서는 새 로컬 또는 시스템 사용자를 생성할 때 사용할 기본값을 설정합니다.\n" " </p>\n" -#. Help text 1/6 -#: src/include/users/helps.rb:109 +#. Help text 1/6 +#: src/include/users/helps.rb:109 msgid "" "<p>\n" "<b>Default Group</b><br>\n" @@ -1185,8 +1128,8 @@ " 새 사용자가 속할 주 그룹의 그룹 이름입니다.\n" " </p>\n" -#. Help text 1.5/6 -#: src/include/users/helps.rb:116 +#. Help text 1.5/6 +#: src/include/users/helps.rb:116 msgid "" "<p>\n" "<b>Secondary Groups</b><br>\n" @@ -1198,45 +1141,39 @@ " 새 사용자를 할당할 추가 그룹의 이름입니다.\n" " </p>\n" -#. Help text 2/6 -#: src/include/users/helps.rb:123 +#. Help text 2/6 +#: src/include/users/helps.rb:123 msgid "" "<p><b>Default Login Shell</b><br>\n" -"The name of the new user's login shell. Select one from the list or enter " -"your own path to the shell.</P>\n" +"The name of the new user's login shell. Select one from the list or enter your own path to the shell.</P>\n" msgstr "" "<p><b>기본 로그인 쉘</b><br>\n" -"새로운 사용자의 로그인 쉘 이름입니다. 목록에서 한가지를 선택하거나 직접 쉘의 " -"경로를 입력하십시오.</P>\n" +"새로운 사용자의 로그인 쉘 이름입니다. 목록에서 한가지를 선택하거나 직접 쉘의 경로를 입력하십시오.</P>\n" -#. Help text 3/6 -#: src/include/users/helps.rb:127 +#. Help text 3/6 +#: src/include/users/helps.rb:127 msgid "" "<p><b>Default Home</b><br>\n" -"The initial path prefix for a new user's home directory. The username is " -"added\n" +"The initial path prefix for a new user's home directory. The username is added\n" "to the end of this value to create the default name of the home directory.\n" "</P>\n" msgstr "" "<p><b>기본 홈</b><br>\n" -"새 사용자의 홈 디렉토리에 대한 초기 경로 접두사입니다. 이 값의 끝에 사용자 이" -"름이\n" +"새 사용자의 홈 디렉토리에 대한 초기 경로 접두사입니다. 이 값의 끝에 사용자 이름이\n" " 추가되어 홈 디렉토리의 기본 이름이 생성됩니다.\n" " </P>\n" -#. Help text 4/6 -#: src/include/users/helps.rb:134 +#. Help text 4/6 +#: src/include/users/helps.rb:134 msgid "" "<p><b>Skeleton Directory</b><br>\n" -"The contents of this directory are copied to a user's home directory when a " -"new user is added. </p>\n" +"The contents of this directory are copied to a user's home directory when a new user is added. </p>\n" msgstr "" "<p><b>골격 디렉토리</b><br>\n" -"새 사용자가 추가되면 이 디렉토리의 내용이 사용자의 홈 디렉토리로 복사됩니다. " -"</p>\n" +"새 사용자가 추가되면 이 디렉토리의 내용이 사용자의 홈 디렉토리로 복사됩니다. </p>\n" -#. Help text 4.5/6 -#: src/include/users/helps.rb:138 +#. Help text 4.5/6 +#: src/include/users/helps.rb:138 msgid "" "<p><b>Umask for Home Directory</b><br>\n" "Umask to use for creating new home directories.</p>\n" @@ -1244,21 +1181,20 @@ "<p><b>홈 디렉토리의 Umask</b><br>\n" "새 홈 디렉토리를 생성하는 데 사용할 Umask입니다.</p>\n" -#. Help text 5/6: -#. Don't reorder letters YYYY-MM-DD, date must be set in this format -#: src/include/users/helps.rb:143 +#. Help text 5/6: +#. Don't reorder letters YYYY-MM-DD, date must be set in this format +#: src/include/users/helps.rb:143 msgid "" "<p><b>Expiration Date</b><br>\n" -"The date on which the user account is disabled. The date must be in the " -"format\n" +"The date on which the user account is disabled. The date must be in the format\n" "YYYY-MM-DD. Leave it empty if this account never expires.</P>\n" msgstr "" "<p><b>만료 날짜</b><br>\n" "사용자 계정이 비활성화되는 날짜입니다. 날짜는 YYYY-MM-DD 형식이어야\n" " 합니다. 만료하지 않을 계정에 대해서는 이 항목을 비워 두십시오.</P>\n" -#. Help text 6/6 -#: src/include/users/helps.rb:149 +#. Help text 6/6 +#: src/include/users/helps.rb:149 msgid "" "<P><B>Days after Password Expiration Login Is Usable</B><BR>\n" "Users can log in after expiration of passwords. Set how many days \n" @@ -1266,13 +1202,12 @@ "</P>\n" msgstr "" "<P><B>비밀번호 만료 후 로그인할 수 있는 기간</B><BR>\n" -"비밀번호 만료 이후에도 사용자가 로그인할 수 있습니다. 비밀번호 만료 후 로그인" -"할\n" +"비밀번호 만료 이후에도 사용자가 로그인할 수 있습니다. 비밀번호 만료 후 로그인할\n" " 수 있는 기간을 설정하십시오. 액세스를 무제한 허용하려면 -1을 사용하십시오.\n" " </P>\n" -#. For translators: read dialog help, part 1 of 2 -#: src/include/users/helps.rb:162 +#. For translators: read dialog help, part 1 of 2 +#: src/include/users/helps.rb:162 msgid "" "<P><B><BIG>Initializing User Management</BIG></B><BR>\n" "Please wait...\n" @@ -1282,8 +1217,8 @@ "잠시 기다려 주십시오...\n" " <BR></P>\n" -#. For translators: read dialog help, part 2 of 2 -#: src/include/users/helps.rb:168 +#. For translators: read dialog help, part 2 of 2 +#: src/include/users/helps.rb:168 msgid "" "<P><B><BIG>Aborting the Initialization</BIG></B><BR>\n" "You can safely abort the configuration utility by pressing <B>Abort</B>\n" @@ -1295,8 +1230,8 @@ " 수 있습니다.\n" " </P>" -#. For translators: read dialog help, part 1 of 2 -#: src/include/users/helps.rb:180 +#. For translators: read dialog help, part 1 of 2 +#: src/include/users/helps.rb:180 msgid "" "<P><B><BIG>Saving User Configuration</BIG></B><BR>\n" "Please wait...\n" @@ -1306,8 +1241,8 @@ "잠시만 기다리십시오...\n" "<BR></P>\n" -#. For translators: read dialog help, part 2 of 2 -#: src/include/users/helps.rb:186 +#. For translators: read dialog help, part 2 of 2 +#: src/include/users/helps.rb:186 msgid "" "<P><B><BIG>Aborting the Save Process:</BIG></B><BR>\n" "Abort the save process by pressing <B>Abort</B>.\n" @@ -1319,8 +1254,8 @@ "추가적인 대화상자가 이 작업이 안전한지 그렇지 않은지를 알려줄 것입니다.\n" "</P>\n" -#. help text 1/7 -#: src/include/users/helps.rb:203 +#. help text 1/7 +#: src/include/users/helps.rb:203 msgid "" "<p>\n" "Enter the <b>First Name</b>, <b>Last Name</b>, \n" @@ -1334,9 +1269,8 @@ " <b>비밀번호</b>를 입력하십시오.\n" " </p>\n" -#. alternative help text 1/7 -#: src/include/users/helps.rb:212 -#: src/lib/users/dialogs/inst_user_first.rb:143 +#. alternative help text 1/7 +#: src/include/users/helps.rb:212 src/lib/users/dialogs/inst_user_first.rb:143 msgid "" "<p>\n" "Enter the <b>User's Full Name</b>, <b>Username</b>, and <b>Password</b> to\n" @@ -1348,91 +1282,72 @@ " <b>비밀번호</b>를 입력하십시오.\n" " </p>\n" -#. help text 2/7 -#: src/include/users/helps.rb:226 +#. help text 2/7 +#: src/include/users/helps.rb:226 msgid "" "<p>\n" "Create the <b>Username</b> from components of the full name by\n" "clicking <b>Suggestion</b>. It may be modified, but use only\n" "letters (no accented characters), digits, and <tt>._-</tt>.\n" -"Do not use uppercase letters in this entry unless you know what you are " -"doing.\n" +"Do not use uppercase letters in this entry unless you know what you are doing.\n" "Usernames have stricter restrictions than passwords. You can redefine the\n" -"restrictions in the /etc/login.defs file. Read its man page for " -"information.\n" +"restrictions in the /etc/login.defs file. Read its man page for information.\n" "</p>\n" msgstr "" "<p>\n" "<b>제안</b>을 클릭하여 전체 이름의 구성 요소로부터 \n" "<b>사용자 이름</b>을 만듭니다. 수정은 가능하지만 문자(악센트\n" " 문자 제외), 숫자 및 <tt>._-</tt>만 사용합니다.\n" -" 뚜렷한 목적이 있는 것이 아니라면 이 항목에는 대문자를 사용하지 않아야 합니" -"다.\n" +" 뚜렷한 목적이 있는 것이 아니라면 이 항목에는 대문자를 사용하지 않아야 합니다.\n" " 사용자 이름은 암호보다 엄격한 제한을 받습니다. 이러한 제한은\n" -" /etc/login.defs 파일에서 다시 정의할 수 있습니다. 자세한 내용은 해당 매뉴얼 " -"페이지를 읽어 보십시오.\n" +" /etc/login.defs 파일에서 다시 정의할 수 있습니다. 자세한 내용은 해당 매뉴얼 페이지를 읽어 보십시오.\n" " </p>\n" -#. alternative help text 2/7 -#: src/include/users/helps.rb:241 +#. alternative help text 2/7 +#: src/include/users/helps.rb:241 msgid "" "<p>\n" "For the <b>Username</b>, use only\n" "letters (no accented characters), digits, and <tt>._-</tt>.\n" -"Do not use uppercase letters in this entry unless you know what you are " -"doing.\n" +"Do not use uppercase letters in this entry unless you know what you are doing.\n" "Usernames have stricter restrictions than passwords. You can redefine the\n" -"restrictions in the /etc/login.defs file. Read its man page for " -"information.\n" +"restrictions in the /etc/login.defs file. Read its man page for information.\n" "</p>\n" msgstr "" "<p>\n" " <b>사용자 이름</b>에는\n" " 문자(악센트 문자 제외), 숫자 및 <tt>._-</tt>만 사용하십시오.\n" " 의도적인 것이 아니라면 이 항목에 대문자를 사용하지 마십시오.\n" -" 사용자 이름에는 비밀번호보다 더 엄격한 제한 사항이 있습니다. /etc/login." -"defs\n" -" 파일에서 제한 사항을 다시 정의할 수 있습니다. 자세한 내용은 맨(man) 페이지" -"를 참조하십시오.\n" +" 사용자 이름에는 비밀번호보다 더 엄격한 제한 사항이 있습니다. /etc/login.defs\n" +" 파일에서 제한 사항을 다시 정의할 수 있습니다. 자세한 내용은 맨(man) 페이지를 참조하십시오.\n" " </p>\n" -#. these are used only during installation time -#. help text 4/7 (only during installation) -#: src/include/users/helps.rb:259 -#: src/lib/users/dialogs/inst_user_first.rb:180 +#. these are used only during installation time +#. help text 4/7 (only during installation) +#: src/include/users/helps.rb:259 src/lib/users/dialogs/inst_user_first.rb:180 msgid "" "<p>\n" -"The username and password created here are needed to log in and work with " -"your Linux system. With <b>Automatic Login</b> enabled, the login procedure " -"is skipped. This user is logged in automatically.</p>\n" +"The username and password created here are needed to log in and work with your Linux system. With <b>Automatic Login</b> enabled, the login procedure is skipped. This user is logged in automatically.</p>\n" msgstr "" "<p>\n" -"여기서 만든 사용자 이름과 암호는 Linux 시스템에 로그인하고 작업할 때 필요합니" -"다. <b>자동 로그인</b>을 활성화하면 로그인 절차가 생략됩니다. 해당 사용자는 " -"자동으로 로그인됩니다.</p>\n" +"여기서 만든 사용자 이름과 암호는 Linux 시스템에 로그인하고 작업할 때 필요합니다. <b>자동 로그인</b>을 활성화하면 로그인 절차가 생략됩니다. 해당 사용자는 자동으로 로그인됩니다.</p>\n" -#. help text 5/7 (only during installation) -#: src/include/users/helps.rb:264 +#. help text 5/7 (only during installation) +#: src/include/users/helps.rb:264 msgid "" "<p>\n" -"Have mail for root forwarded to this user by checking <b>Receive System " -"Mail</b>.</p>\n" +"Have mail for root forwarded to this user by checking <b>Receive System Mail</b>.</p>\n" msgstr "" "<p>\n" -"<b>시스템 메일 수신</b>을 선택하면 루트에 대한 메일이 이 사용자에게 전달됩니" -"다.</p>\n" +"<b>시스템 메일 수신</b>을 선택하면 루트에 대한 메일이 이 사용자에게 전달됩니다.</p>\n" -#. help text 6/7 (only during installation) -#: src/include/users/helps.rb:269 -msgid "" -"<p>Press <b>User Management</b> to add more users or groups to your system." -msgstr "" -"<p>시스템에 더 많은 사용자 또는 그룹을 추가하려면 <b>사용자 관리</b>를 누르십" -"시오.</p>" +#. help text 6/7 (only during installation) +#: src/include/users/helps.rb:269 +msgid "<p>Press <b>User Management</b> to add more users or groups to your system.</p>" +msgstr "<p>시스템에 더 많은 사용자 또는 그룹을 추가하려면 <b>사용자 관리</b>를 누르십시오.</p>" -#. alternative help text 4/7 -#: src/include/users/helps.rb:278 +#. alternative help text 4/7 +#: src/include/users/helps.rb:278 msgid "" "<p>\n" "To see more details, such as the home directory or the user ID, click\n" @@ -1444,19 +1359,17 @@ "버튼을 누르십시오.\n" "</p>\n" -#. alternative help text 5/7 -#: src/include/users/helps.rb:286 +#. alternative help text 5/7 +#: src/include/users/helps.rb:286 msgid "" "<p>\n" -"To edit various password settings of this user, such as expiration date, " -"click <b>Password Settings</b>.</p>\n" +"To edit various password settings of this user, such as expiration date, click <b>Password Settings</b>.</p>\n" msgstr "" "<p>\n" -"만료 날짜 등 이 사용자의 다양한 암호 설정을 편집하려면 <b>암호 설정</b>을 클" -"릭하십시오.</p>\n" +"만료 날짜 등 이 사용자의 다양한 암호 설정을 편집하려면 <b>암호 설정</b>을 클릭하십시오.</p>\n" -#. help text 7/7 -#: src/include/users/helps.rb:296 +#. help text 7/7 +#: src/include/users/helps.rb:296 msgid "" "<p>To forbid this user to\n" "log in, check <b>Disable User Login</b>.</p>" @@ -1464,8 +1377,8 @@ "<p>이 사용자가 로그인하지 못하게 하려면\n" "<b>사용자 로그인 비활성화</b>를 선택하십시오.</p>" -#. help text 1/6 -#: src/include/users/helps.rb:316 +#. help text 1/6 +#: src/include/users/helps.rb:316 msgid "" "<p>\n" "Enter the group data here. \n" @@ -1475,8 +1388,8 @@ "여기서 그룹 데이터를 입력합니다. \n" " </p>\n" -#. help text 2/6 -#: src/include/users/helps.rb:318 +#. help text 2/6 +#: src/include/users/helps.rb:318 msgid "" "<p>\n" "<b>Group Name:</b>\n" @@ -1494,8 +1407,8 @@ " 있습니다. 자세한 내용은 맨(man) 페이지를 참조하십시오.\n" " </p>\n" -#. help text 3/6, %1 is number -#: src/include/users/helps.rb:329 +#. help text 3/6, %1 is number +#: src/include/users/helps.rb:329 msgid "" "<p>\n" "<b>Group ID (gid):</b>\n" @@ -1513,13 +1426,12 @@ " 것을 사용하려고 하면 경고 메시지가 나타납니다.\n" " </p>\n" -#. help text 4/6 -#: src/include/users/helps.rb:342 +#. help text 4/6 +#: src/include/users/helps.rb:342 msgid "" "<p>\n" "<b>Password:</b>\n" -"To require users who are not members of the group to identify themselves " -"when\n" +"To require users who are not members of the group to identify themselves when\n" "switching to this group (see the man page of <tt>newgrp</tt>), assign a\n" "password to this group. For security reasons, this password is not shown\n" "here. This entry is not required.\n" @@ -1533,8 +1445,8 @@ " 않습니다. 이것은 필수 항목이 아닙니다.\n" " </p>\n" -#. help text 5/6 -#: src/include/users/helps.rb:353 +#. help text 5/6 +#: src/include/users/helps.rb:353 msgid "" "<p>\n" "<b>Confirm Password:</b>\n" @@ -1546,8 +1458,8 @@ " 입력 오류를 피하기 위해 비밀번호를 한 번 더 입력하십시오.\n" " </p>\n" -#. help text 6/6 -#: src/include/users/helps.rb:361 +#. help text 6/6 +#: src/include/users/helps.rb:361 msgid "" "<p>\n" "<b>Group Members:</b>\n" @@ -1559,8 +1471,8 @@ " 이 그룹의 구성원이 될 사용자를 여기서 선택하십시오.\n" " </p>\n" -#. additional helptext for EditFroup dialog -#: src/include/users/helps.rb:373 +#. additional helptext for EditFroup dialog +#: src/include/users/helps.rb:373 msgid "" "The second list shows users for which this group is the default\n" " group. The default group can only be changed by editing the user." @@ -1568,8 +1480,8 @@ "두 번째 목록은 이 그룹이 기본 그룹인 사용자를 보여줍니다.\n" " 기본 그룹은 사용자를 편집해야만 변경할 수 있습니다." -#. help text 1/8 -#: src/include/users/helps.rb:392 +#. help text 1/8 +#: src/include/users/helps.rb:392 msgid "" "<p>\n" "Additional user data includes:\n" @@ -1579,8 +1491,8 @@ "추가 사용자 데이터에 포함되는 내용:\n" " </p>" -#. help text 2/8, %1 is number -#: src/include/users/helps.rb:395 +#. help text 2/8, %1 is number +#: src/include/users/helps.rb:395 msgid "" "<p>\n" "<b>User ID (uid):</b>\n" @@ -1598,8 +1510,8 @@ " 의사 로그인을 위해 시스템에서 사용합니다.\n" " </p>\n" -#. help text 3/8 -#: src/include/users/helps.rb:408 +#. help text 3/8 +#: src/include/users/helps.rb:408 msgid "" "<p>\n" "If you change the UID of an existing user, the rights of the files\n" @@ -1613,8 +1525,8 @@ "변경되지만, 다른곳에 위치한 파일들은 자동으로\n" "변경되지 않습니다.\n" -#. help text 4/8 -#: src/include/users/helps.rb:417 +#. help text 4/8 +#: src/include/users/helps.rb:417 msgid "" "<p>\n" "<b>Home Directory:</b>\n" @@ -1630,17 +1542,13 @@ " 기존 디렉토리를 선택하려면 <b>찾아보기</b>를 클릭하십시오.\n" " </p>\n" -#. help text for user's home directory mode -#: src/include/users/helps.rb:430 -msgid "" -"<p>Optionally, set the <b>Home Directory Permission Mode</b> for this user's " -"home directory different from the default.</p>" -msgstr "" -"<p>선택적으로 이 사용자의 홈 디렉토리에 대한 <b>홈 디렉토리 권한 모드</b>를 " -"기본값과 다르게 설정할 수 있습니다.</p>" +#. help text for user's home directory mode +#: src/include/users/helps.rb:430 +msgid "<p>Optionally, set the <b>Home Directory Permission Mode</b> for this user's home directory different from the default.</p>" +msgstr "<p>선택적으로 이 사용자의 홈 디렉토리에 대한 <b>홈 디렉토리 권한 모드</b>를 기본값과 다르게 설정할 수 있습니다.</p>" -#. alternate helptext 4.5/8; %1 is directory (e.g. '/etc/skel') -#: src/include/users/helps.rb:440 +#. alternate helptext 4.5/8; %1 is directory (e.g. '/etc/skel') +#: src/include/users/helps.rb:440 msgid "" "<p>To create only an empty home directory,\n" "check <b>Empty Home</b>. Otherwise, the new home directory\n" @@ -1650,50 +1558,33 @@ "<b>비어 있는 홈</b>을 선택하십시오. 이것을 선택하지 않으면 기본 골격(%1)을\n" " 사용하여 새로운 홈 디렉토리가 생성됩니다.</p>\n" -#. help text for Move to new location checkbox -#: src/include/users/helps.rb:452 -msgid "" -"<p>If changing the location of a user's home directory, move the contents of " -"the current directory with <b>Move to New Location</b>, activated by " -"default. Otherwise a new home directory is created without any of the " -"existing data.</p>" -msgstr "" -"<p>사용자의 홈 디렉토리 위치를 바꿀 경우 기본적으로 활성화되어 있는 <b>새 위" -"치로 이동</b>을 사용하여 현재 디렉토리의 내용도 옮기십시오. 그렇지 않으면 기" -"존 데이터 없이 새 홈 디렉토리만 만들어집니다.</p>" +#. help text for Move to new location checkbox +#: src/include/users/helps.rb:452 +msgid "<p>If changing the location of a user's home directory, move the contents of the current directory with <b>Move to New Location</b>, activated by default. Otherwise a new home directory is created without any of the existing data.</p>" +msgstr "<p>사용자의 홈 디렉토리 위치를 바꿀 경우 기본적으로 활성화되어 있는 <b>새 위치로 이동</b>을 사용하여 현재 디렉토리의 내용도 옮기십시오. 그렇지 않으면 기존 데이터 없이 새 홈 디렉토리만 만들어집니다.</p>" -#. help text for directory encryption -#: src/include/users/helps.rb:464 +#. help text for directory encryption +#: src/include/users/helps.rb:464 msgid "" "<p>To encrypt the user's home directory, enable <b>Use Encrypted Home\n" -"Directory</b> and set the directory size. Encrypting a user's home " -"directory\n" -"does not provide strong security from other users. If this machine is " -"shared\n" +"Directory</b> and set the directory size. Encrypting a user's home directory\n" +"does not provide strong security from other users. If this machine is shared\n" "among multiple users, it may be possible for a user to compromise system\n" -"security by obtaining another user's key and gaining access to the encrypted " -"data. If strong security is required, the system should not be physically " -"shared.</p>" +"security by obtaining another user's key and gaining access to the encrypted data. If strong security is required, the system should not be physically shared.</p>" msgstr "" "<p>사용자의 홈 디렉토리를 암호화하려면 <b>암호화된 홈 디렉토리\n" "사용</b>을 활성화하고 디렉토리 크기를 설정하십시오. 사용자의 홈 디렉토리를\n" "암호화하면 다른 사용자로부터 강력한 보안이 제공되지 않습니다. 이 컴퓨터가\n" "여러 사용자 간에 공유되지 않는 경우 사용자가 다른 사용자의 키를 얻고\n" -"암호화된 데이터에 액세스하여 시스템 보안이 손상될 수도 있습니다. 강력한 보안" -"이 필요한 경우 시스템이 물리적으로 공유되지 않아야 합니다.</p>" +"암호화된 데이터에 액세스하여 시스템 보안이 손상될 수도 있습니다. 강력한 보안이 필요한 경우 시스템이 물리적으로 공유되지 않아야 합니다.</p>" -#. help text for directory encryption -#: src/include/users/helps.rb:476 -msgid "" -"<p>Home directories cannot be encrypted if a fingerprint reader device is " -"used. To encrypt the user's home directory, disable fingerprint " -"configuration first.</p>" -msgstr "" -"<p>지문 판독기 장치가 사용되는 경우 홈 디렉토리를 암호화할 수 없습니다. 사용" -"자의 홈 디렉토리를 암호화하려면 먼저 지문 구성을 비활성화하십시오.</p>" +#. help text for directory encryption +#: src/include/users/helps.rb:476 +msgid "<p>Home directories cannot be encrypted if a fingerprint reader device is used. To encrypt the user's home directory, disable fingerprint configuration first.</p>" +msgstr "<p>지문 판독기 장치가 사용되는 경우 홈 디렉토리를 암호화할 수 없습니다. 사용자의 홈 디렉토리를 암호화하려면 먼저 지문 구성을 비활성화하십시오.</p>" -#. alternate helptext 5/8 -#: src/include/users/helps.rb:487 +#. alternate helptext 5/8 +#: src/include/users/helps.rb:487 msgid "" "<p>\n" "The home directory of an LDAP user can be changed only on the\n" @@ -1703,8 +1594,8 @@ "LDAP 사용자의 홈 디렉토리는 파일서버 상에서만 변경할 수\n" "있습니다.</p>" -#. alternate helptext 5/8 -#: src/include/users/helps.rb:497 +#. alternate helptext 5/8 +#: src/include/users/helps.rb:497 msgid "" "<p><b>Additional Information:</b>\n" "Some additional user data could be set here. This field may contain up to\n" @@ -1713,15 +1604,13 @@ "shown when you use the <i>finger</i> command on this user.</p>\n" msgstr "" "<p><b>추가 정보:</b>\n" -"몇몇 추가 사용자 데이터를 여기서 설정할 수 있습니다. 쉼표로 구분하여 세 부분" -"까지\n" +"몇몇 추가 사용자 데이터를 여기서 설정할 수 있습니다. 쉼표로 구분하여 세 부분까지\n" " 이 필드에 포함할 수 있습니다. 기본 사용법은\n" -" <i>사무실</i>,<i>직장 전화</i>,<i>집 전화</i>를 기록하는 것입니다. 이 사용자" -"에 \n" +" <i>사무실</i>,<i>직장 전화</i>,<i>집 전화</i>를 기록하는 것입니다. 이 사용자에 \n" " 대해 <i>finger</i> 명령을 사용하면 이러한 정보를 볼 수 있습니다.</p>\n" -#. help text 6/8 -#: src/include/users/helps.rb:512 +#. help text 6/8 +#: src/include/users/helps.rb:512 msgid "" "<p>\n" "<b>Login Shell:</b>\n" @@ -1737,8 +1626,8 @@ " 선택하십시오.\n" " </p>" -#. help text 7/8 -#: src/include/users/helps.rb:522 +#. help text 7/8 +#: src/include/users/helps.rb:522 msgid "" "<p>\n" "<b>Default Group:</b>\n" @@ -1752,8 +1641,8 @@ " 모든 그룹의 목록에서 하나를 선택하십시오.\n" " </p>" -#. help text 8/8 -#: src/include/users/helps.rb:531 +#. help text 8/8 +#: src/include/users/helps.rb:531 msgid "" "<p>\n" "<b>Additional Groups:</b>\n" @@ -1765,8 +1654,8 @@ "사용자가 구성원으로 속해야 하는 추가 그룹을 선택합니다.\n" "</p>\n" -#. helptxt for plugin dialog 1/2 -#: src/include/users/helps.rb:544 +#. helptxt for plugin dialog 1/2 +#: src/include/users/helps.rb:544 msgid "" "<p>Here, see the list of plug-ins, the\n" "extensions of user and group configuration.</p>\n" @@ -1774,8 +1663,8 @@ "<p>여기서 플러그인 목록, 즉 사용자 및 그룹\n" "구성의 확장 목록을 볼 수 있습니다.</p>\n" -#. helptext for plugin dialog 2/3 -#: src/include/users/helps.rb:548 +#. helptext for plugin dialog 2/3 +#: src/include/users/helps.rb:548 msgid "" "The check mark in the left part of the table indicates that the plug-in\n" "is currently in use." @@ -1783,17 +1672,13 @@ "테이블 왼쪽에 확인 표시가 되어 있으면 해당 플러그인이 현재 사용\n" "중임을 나타냅니다." -#. helptext for plugin dialog 3/3 -#: src/include/users/helps.rb:552 -msgid "" -"<p>Start the detailed configuration of a particular plug-in by selecting " -"<b>Launch</b>.</p>" -msgstr "" -"<p><b>시작</b>을 누르면 특정 플러그인의 세부적인 구성을 시작할 수 있습니다." +#. helptext for plugin dialog 3/3 +#: src/include/users/helps.rb:552 +msgid "<p>Start the detailed configuration of a particular plug-in by selecting <b>Launch</b>.</p>" +msgstr "<p><b>시작</b>을 누르면 특정 플러그인의 세부적인 구성을 시작할 수 있습니다.</p>" -#. help texts 1/1 -#: src/include/users/helps.rb:562 +#. help texts 1/1 +#: src/include/users/helps.rb:562 msgid "" "<p>\n" "Save the current user and group settings to the system.\n" @@ -1803,8 +1688,8 @@ "현재 사용자 및 그룹 설정을 시스템에 저장합니다.\n" " </p>" -#. Help text 1/6 -#: src/include/users/helps.rb:573 +#. Help text 1/6 +#: src/include/users/helps.rb:573 msgid "" "<p>Activate <b>Force Password Change</b> to force the user to change the\n" "password at the next login. If <b>Last Password Change</b> is set to\n" @@ -1814,8 +1699,8 @@ "<b>강제 비밀번호 변경</b>을 활성화하십시오. <b>마지막 비밀번호 변경</b>이\n" "<i>안 함</i>으로 설정된 경우 사용자가 비밀번호를 변경하도록 강제됩니다.</p>" -#. Help text 2/6 -#: src/include/users/helps.rb:579 +#. Help text 2/6 +#: src/include/users/helps.rb:579 msgid "" "<p>\n" "<b>Days before Password Expiration to Issue Warning</B><BR>\n" @@ -1831,8 +1716,8 @@ " 비활성화됩니다. \n" " </p>\n" -#. Help text 3/6 -#: src/include/users/helps.rb:588 +#. Help text 3/6 +#: src/include/users/helps.rb:588 msgid "" "<P><B>Days after Password Expires with Usable Login</B><BR>\n" "Users can log in after their passwords have expired. Set how many days to\n" @@ -1840,35 +1725,30 @@ "</P>\n" msgstr "" "<P><B>비밀번호 만료 후 로그인 허용 기간</B><BR>\n" -"비밀번호가 만료된 후에도 사용자가 로그인할 수 있습니다. 사용자의 로그인을 허" -"용할\n" +"비밀번호가 만료된 후에도 사용자가 로그인할 수 있습니다. 사용자의 로그인을 허용할\n" " 기간을 설정하십시오. 액세스를 무제한 허용하려면 -1을 사용하십시오.\n" " </P>\n" -#. Help text 4/6 -#: src/include/users/helps.rb:595 +#. Help text 4/6 +#: src/include/users/helps.rb:595 msgid "" -"<P><B>Maximum Number of Days for the Same Password</B><BR>Set how many days " -"a user \n" +"<P><B>Maximum Number of Days for the Same Password</B><BR>Set how many days a user \n" "can use the same password before it expires.</P>\n" msgstr "" -"<P><B>같은 비밀번호를 사용할 수 있는 최대 기간</B><BR>만료 전 사용자가 같은 " -"비밀번호를 \n" +"<P><B>같은 비밀번호를 사용할 수 있는 최대 기간</B><BR>만료 전 사용자가 같은 비밀번호를 \n" "사용할 수 있는 날짜를 설정합니다.</P>\n" -#. Help text 5/6 -#: src/include/users/helps.rb:599 +#. Help text 5/6 +#: src/include/users/helps.rb:599 msgid "" -"<P><B>Minimum Number of Days for the Same Password</B><BR>Set the minimum " -"age of \n" +"<P><B>Minimum Number of Days for the Same Password</B><BR>Set the minimum age of \n" "a password before a user is allowed to change it.</P>\n" msgstr "" -"<P><B>같은 비밀번호를 사용할 수 있는 최소 기간</B><BR>사용자의 변경을 허용하" -"기 \n" +"<P><B>같은 비밀번호를 사용할 수 있는 최소 기간</B><BR>사용자의 변경을 허용하기 \n" "전까지 비밀번호의 최소 수명 기간을 설정합니다.</P>\n" -#. Help text 6/6 : Don't reorder letters YYYY-MM-DD, date must be set in this format -#: src/include/users/helps.rb:603 +#. Help text 6/6 : Don't reorder letters YYYY-MM-DD, date must be set in this format +#: src/include/users/helps.rb:603 msgid "" "<P><B>Expiration Date</B><BR>Set the date when this account expires. \n" "The date must be in the format YYYY-MM-DD. \n" @@ -1878,8 +1758,8 @@ "날짜는 YYYY-MM-DD 형식이어야 합니다. \n" " 만료하지 않을 계정에 대해서는 이 항목을 비워 두십시오.</P>\n" -#. help text 1/2 -#: src/include/users/helps.rb:613 +#. help text 1/2 +#: src/include/users/helps.rb:613 msgid "" "<p>\n" "<b>Configuration Overview</b><br>\n" @@ -1893,271 +1773,198 @@ "모듈들의 개요를 볼수 있습니다.\n" "</p>\n" -#. help text 2/2 -#: src/include/users/helps.rb:621 +#. help text 2/2 +#: src/include/users/helps.rb:621 msgid "" "<p>\n" "<b>Changing the Values</b><br>\n" -"You can configure these settings by running appropriate modules. Select the " -"module with <b>Configure</b>.\n" +"You can configure these settings by running appropriate modules. Select the module with <b>Configure</b>.\n" "</p>\n" msgstr "" "<p>\n" "<b>값 변경</b><br>\n" -" 적절한 모듈을 실행하여 이러한 설정을 구성할 수 있습니다. <b>구성</b>과 함께 " -"모듈을 선택하십시오.\n" +" 적절한 모듈을 실행하여 이러한 설정을 구성할 수 있습니다. <b>구성</b>과 함께 모듈을 선택하십시오.\n" " </p>\n" -#. help text for Password Policy Dialog -#: src/include/users/ldap_dialogs.rb:62 -msgid "" -"<p>Select the <b>Password Change Policies</b>, <b>Password Aging Policies, and <b>Lockout Policies</b> tabs to choose LDAP password policy groups " -"of attributes to configure.</p>" -msgstr "" -"<p>구성할 속성의 LDAP 암호 정책 그룹을 선택하려면 <b>암호 변경 정책</b>, <b>" -"암호 에이징 정책</b> 및 <b>잠금 정책</b> 탭을 선택합니다.</p>" +#. help text for Password Policy Dialog +#: src/include/users/ldap_dialogs.rb:62 +msgid "<p>Select the <b>Password Change Policies</b>, <b>Password Aging Policies</b>, and <b>Lockout Policies</b> tabs to choose LDAP password policy groups of attributes to configure.</p>" +msgstr "<p>구성할 속성의 LDAP 암호 정책 그룹을 선택하려면 <b>암호 변경 정책</b>, <b>암호 에이징 정책</b> 및 <b>잠금 정책</b> 탭을 선택합니다.</p>" -#. help text for pwdInHistory attribute -#: src/include/users/ldap_dialogs.rb:70 -msgid "" -"<p>Specify the <b>Maximum Number of Passwords Stored in History</b> to set " -"how many previously used passwords should be saved. Saved passwords may not " -"be used.</p>" -msgstr "" -"<p>이전에 사용한 암호 중 저장해야 할 수를 설정하려면 <b>기록에 저장되는 최대 " -"암호 수</b>를 지정합니다. 저장된 암호는 사용되지 않습니다.</p>" +#. help text for pwdInHistory attribute +#: src/include/users/ldap_dialogs.rb:70 +msgid "<p>Specify the <b>Maximum Number of Passwords Stored in History</b> to set how many previously used passwords should be saved. Saved passwords may not be used.</p>" +msgstr "<p>이전에 사용한 암호 중 저장해야 할 수를 설정하려면 <b>기록에 저장되는 최대 암호 수</b>를 지정합니다. 저장된 암호는 사용되지 않습니다.</p>" -#. help text for pwdMustChange attribute -#: src/include/users/ldap_dialogs.rb:74 -msgid "" -"<p>Check <b>User Must Change Password after Reset</b> to force users to " -"change their passwords after the the password is reset or changed by an " -"administrator.</p>" -msgstr "" -"<p>관리자가 암호를 다시 설정하거나 변경한 경우 사용자도 암호를 변경하도록 하" -"려면 <b>다시 설정 후 사용자도 암호를 변경해야 함</b>을 선택합니다.</p>" +#. help text for pwdMustChange attribute +#: src/include/users/ldap_dialogs.rb:74 +msgid "<p>Check <b>User Must Change Password after Reset</b> to force users to change their passwords after the the password is reset or changed by an administrator.</p>" +msgstr "<p>관리자가 암호를 다시 설정하거나 변경한 경우 사용자도 암호를 변경하도록 하려면 <b>다시 설정 후 사용자도 암호를 변경해야 함</b>을 선택합니다.</p>" -#. help text for pwdAllowUserChange attribute -#: src/include/users/ldap_dialogs.rb:78 -msgid "" -"<p>Check <b>User Can Change Password</b> to allow users to change their " -"passwords.</p>" -msgstr "" -"<p>사용자도 암호를 변경할 수 있도록 하려면 <b>사용자도 암호 변경 가능</b>을 " -"선택합니다.</p>" +#. help text for pwdAllowUserChange attribute +#: src/include/users/ldap_dialogs.rb:78 +msgid "<p>Check <b>User Can Change Password</b> to allow users to change their passwords.</p>" +msgstr "<p>사용자도 암호를 변경할 수 있도록 하려면 <b>사용자도 암호 변경 가능</b>을 선택합니다.</p>" -#. help text for pwdSafeModify attribute -#: src/include/users/ldap_dialogs.rb:82 -msgid "" -"<p>If the existing password must be provided along with the new password, " -"check <b>Old Password Required for Password Change</b>.</p>" -msgstr "" -"<p>새 암호와 함께 기존 암호도 제공해야 하는 경우에는 <b>암호 변경을 위해 이" -"전 암호 필요</b>를 선택합니다.</p>" +#. help text for pwdSafeModify attribute +#: src/include/users/ldap_dialogs.rb:82 +msgid "<p>If the existing password must be provided along with the new password, check <b>Old Password Required for Password Change</b>.</p>" +msgstr "<p>새 암호와 함께 기존 암호도 제공해야 하는 경우에는 <b>암호 변경을 위해 이전 암호 필요</b>를 선택합니다.</p>" -#. help text for pwdCheckQuality attribute -#: src/include/users/ldap_dialogs.rb:86 -msgid "" -"<p>Select whether the password quality should be verified while passwords " -"are modified or added. Select <b>No Checking</b> if passwords should not be " -"checked at all. With <b>Accept Uncheckable Passwords</b>, passwords are " -"accepted even if the check cannot be performed, for example, if the user has " -"provided an encrypted password. With <b>Only Accept Checked Passwords</b> " -"passwords are refused if the quality test fails or the password cannot be " -"checked.</p>" -msgstr "" -"<p>비밀번호를 수정하거나 추가할 때 비밀번호 품질을 확인할지 여부를 선택합니" -"다. 비밀번호를 확인하지 않을 경우 <b>확인 안 함</b>을 선택합니다. <b>확인 불" -"가능한 비밀번호 허용</b>을 선택하면 확인을 수행할 수 없는 경우(예: 사용자가 " -"암호화된 비밀번호를 제공한 경우)에도 비밀번호가 허용됩니다. <b>확인한 비밀번" -"호만 허용</b>을 선택하면 품질 테스트가 실패하거나 비밀번호를 확인할 수 없는 " -"경우 비밀번호가 거부됩니다.</p>" +#. help text for pwdCheckQuality attribute +#: src/include/users/ldap_dialogs.rb:86 +msgid "<p>Select whether the password quality should be verified while passwords are modified or added. Select <b>No Checking</b> if passwords should not be checked at all. With <b>Accept Uncheckable Passwords</b>, passwords are accepted even if the check cannot be performed, for example, if the user has provided an encrypted password. With <b>Only Accept Checked Passwords</b> passwords are refused if the quality test fails or the password cannot be checked.</p>" +msgstr "<p>비밀번호를 수정하거나 추가할 때 비밀번호 품질을 확인할지 여부를 선택합니다. 비밀번호를 확인하지 않을 경우 <b>확인 안 함</b>을 선택합니다. <b>확인 불가능한 비밀번호 허용</b>을 선택하면 확인을 수행할 수 없는 경우(예: 사용자가 암호화된 비밀번호를 제공한 경우)에도 비밀번호가 허용됩니다. <b>확인한 비밀번호만 허용</b>을 선택하면 품질 테스트가 실패하거나 비밀번호를 확인할 수 없는 경우 비밀번호가 거부됩니다.</p>" -#. help text for pwdMinLength attribute -#: src/include/users/ldap_dialogs.rb:90 -msgid "" -"Set the minimum number of characters that must be used in a password in " -"<b>Minimum Password Length</b>.</p>" +#. help text for pwdMinLength attribute +#: src/include/users/ldap_dialogs.rb:90 +msgid "Set the minimum number of characters that must be used in a password in <b>Minimum Password Length</b>.</p>" msgstr "<b>최소 암호 길이</b>에서는 암호의 최소 문자 수를 설정합니다.</p>" -#. help text for pwdMinAge attribute -#: src/include/users/ldap_dialogs.rb:94 -msgid "" -"<p><b>Minimum Password Age</b> sets how much time must pass between " -"modifications to the password.</p>" -msgstr "" -"<p><b>최소 암호 수명</b>은 암호를 수정할 수 있는 시간 간격을 설정합니다.</p>" +#. help text for pwdMinAge attribute +#: src/include/users/ldap_dialogs.rb:94 +msgid "<p><b>Minimum Password Age</b> sets how much time must pass between modifications to the password.</p>" +msgstr "<p><b>최소 암호 수명</b>은 암호를 수정할 수 있는 시간 간격을 설정합니다.</p>" -#. help text for pwdMaxAge attribute -#: src/include/users/ldap_dialogs.rb:98 -msgid "" -"<p><b>Maximum Password Age</b> sets how long after modification a password " -"expires.</p>" -msgstr "" -"<p><b>최대 암호 수명</b>에서는 수정 후 암호 유효 기간이 만료되는 시간 간격을 " -"설정합니다.</p>" +#. help text for pwdMaxAge attribute +#: src/include/users/ldap_dialogs.rb:98 +msgid "<p><b>Maximum Password Age</b> sets how long after modification a password expires.</p>" +msgstr "<p><b>최대 암호 수명</b>에서는 수정 후 암호 유효 기간이 만료되는 시간 간격을 설정합니다.</p>" -#. help text for pwdExpireWarning attribute -#: src/include/users/ldap_dialogs.rb:102 -msgid "" -"<p>In <b>Time before Password Expiration to Issue Warning</b> set how long " -"before a password is due to expire that an expiration warning messages " -"should be given to an authenticating user.</p>" -msgstr "" -"<p><b>암호 만료 이전에 경고를 발행할 시간</b>에서는 암호가 만료되기 얼마 전" -"에 인증 사용자에게 만료 경고 메시지를 제공해야 하는 지를 설정합니다.</p>" +#. help text for pwdExpireWarning attribute +#: src/include/users/ldap_dialogs.rb:102 +msgid "<p>In <b>Time before Password Expiration to Issue Warning</b> set how long before a password is due to expire that an expiration warning messages should be given to an authenticating user.</p>" +msgstr "<p><b>암호 만료 이전에 경고를 발행할 시간</b>에서는 암호가 만료되기 얼마 전에 인증 사용자에게 만료 경고 메시지를 제공해야 하는 지를 설정합니다.</p>" -#. help text for pwdGraceAuthNLimit attribute -#: src/include/users/ldap_dialogs.rb:106 -msgid "" -"<p>Set the number of times an expired password can be used to authenticate " -"in <b>Allowed Uses of an Expired Password</b>.</p>" -msgstr "" -"<p><b>만료되는 암호에 허용된 사용 횟수</b>에서는 만료되는 암호를 인증하는 데 " -"사용할 수 있는 횟수를 설정합니다.</p>" +#. help text for pwdGraceAuthNLimit attribute +#: src/include/users/ldap_dialogs.rb:106 +msgid "<p>Set the number of times an expired password can be used to authenticate in <b>Allowed Uses of an Expired Password</b>.</p>" +msgstr "<p><b>만료되는 암호에 허용된 사용 횟수</b>에서는 만료되는 암호를 인증하는 데 사용할 수 있는 횟수를 설정합니다.</p>" -#. help text for pwdLockout attribute -#: src/include/users/ldap_dialogs.rb:110 -msgid "" -"<p>Check <b>Enable Password Locking</b> to forbid use of a password after a " -"specified number of consecutive failed bind attempts.</p>" -msgstr "" -"<p>지정된 연속 실패 바인딩 시도 횟수 이후에는 암호 사용을 금지시키려면 <b>암" -"호 잠금 활성화</b>를 선택합니다.</p>" +#. help text for pwdLockout attribute +#: src/include/users/ldap_dialogs.rb:110 +msgid "<p>Check <b>Enable Password Locking</b> to forbid use of a password after a specified number of consecutive failed bind attempts.</p>" +msgstr "<p>지정된 연속 실패 바인딩 시도 횟수 이후에는 암호 사용을 금지시키려면 <b>암호 잠금 활성화</b>를 선택합니다.</p>" -#. help text for pwdMaxFailure attribute -#: src/include/users/ldap_dialogs.rb:114 -msgid "" -"<p>Set the number of consecutive failed bind attempts after which the " -"password may not be used to authenticate in <b>Bind Failures to Lock the " -"Password</b>.</p>" -msgstr "" -"<p><b>암호 잠금 바인딩 실패 횟수</b>에서는 그 후에는 인증 시 해당 암호를 사용" -"하지 않아야 하는 연속 바인딩 실패 횟수를 설정합니다.</p>" +#. help text for pwdMaxFailure attribute +#: src/include/users/ldap_dialogs.rb:114 +msgid "<p>Set the number of consecutive failed bind attempts after which the password may not be used to authenticate in <b>Bind Failures to Lock the Password</b>.</p>" +msgstr "<p><b>암호 잠금 바인딩 실패 횟수</b>에서는 그 후에는 인증 시 해당 암호를 사용하지 않아야 하는 연속 바인딩 실패 횟수를 설정합니다.</p>" -#. help text for pwdLockoutDuration attribute -#: src/include/users/ldap_dialogs.rb:118 -msgid "" -"<p>Set how long the password cannot be used in <b>Password Lock Duration</b>." -"</p>" -msgstr "" -"<p><b>암호 잠금 기간</b>에서는 암호를 사용할 수 없는 기간을 설정합니다.</p>" +#. help text for pwdLockoutDuration attribute +#: src/include/users/ldap_dialogs.rb:118 +msgid "<p>Set how long the password cannot be used in <b>Password Lock Duration</b>.</p>" +msgstr "<p><b>암호 잠금 기간</b>에서는 암호를 사용할 수 없는 기간을 설정합니다.</p>" -#. help text for pwdFailureCountInterval attribute -#: src/include/users/ldap_dialogs.rb:122 -msgid "" -"<p><b>Bind Failures Cache Duration</b> sets how long before password " -"failures are purged from the failure counter even though no successful " -"authentication has occurred.</p>" -msgstr "" -"<p><b>바인딩 실패 캐시 기간</b>에서는 성공적인 인증이 발생하지 않더라도 암호 " -"실패를 실패 카운터에서 삭제하는 기간을 설정합니다.</p>" +#. help text for pwdFailureCountInterval attribute +#: src/include/users/ldap_dialogs.rb:122 +msgid "<p><b>Bind Failures Cache Duration</b> sets how long before password failures are purged from the failure counter even though no successful authentication has occurred.</p>" +msgstr "<p><b>바인딩 실패 캐시 기간</b>에서는 성공적인 인증이 발생하지 않더라도 암호 실패를 실패 카운터에서 삭제하는 기간을 설정합니다.</p>" -#. tab label -#: src/include/users/ldap_dialogs.rb:171 +#. tab label +#: src/include/users/ldap_dialogs.rb:171 msgid "&Password Change Policies" msgstr "암호 변경 정책(&P)" -#. tab label -#: src/include/users/ldap_dialogs.rb:173 +#. tab label +#: src/include/users/ldap_dialogs.rb:173 msgid "Pa&ssword Aging Policies" msgstr "암호 에이징 정책(&S)" -#. tab label -#: src/include/users/ldap_dialogs.rb:175 +#. tab label +#: src/include/users/ldap_dialogs.rb:175 msgid "&Lockout Policies" msgstr "잠금 정책(&L)" -#. IntField label -#: src/include/users/ldap_dialogs.rb:211 +#. IntField label +#: src/include/users/ldap_dialogs.rb:211 msgid "Ma&ximum Number of Passwords Stored in History" msgstr "기록에 저장되는 최대 암호 수(&X)" -#. checkbox label -#: src/include/users/ldap_dialogs.rb:221 +#. checkbox label +#: src/include/users/ldap_dialogs.rb:221 msgid "U&ser Must Change Password after Reset" msgstr "다시 설정 후 사용자도 암호를 변경해야 함(&)" -#. checkbox label -#: src/include/users/ldap_dialogs.rb:230 +#. checkbox label +#: src/include/users/ldap_dialogs.rb:230 msgid "&User Can Change Password" msgstr "사용자도 암호 변경 가능(&U)" -#. checkbox label -#: src/include/users/ldap_dialogs.rb:239 +#. checkbox label +#: src/include/users/ldap_dialogs.rb:239 msgid "&Old Password Required for Password Change" msgstr "암호 변경을 위해 이전 암호 필요(&O)" -#. frame label -#: src/include/users/ldap_dialogs.rb:248 +#. frame label +#: src/include/users/ldap_dialogs.rb:248 msgid "Password Quality Checking" msgstr "암호 품질 확인" -#: src/include/users/ldap_dialogs.rb:258 +#: src/include/users/ldap_dialogs.rb:258 msgid "&No Checking" msgstr "확인 안 함(&N)" -#: src/include/users/ldap_dialogs.rb:266 +#: src/include/users/ldap_dialogs.rb:266 msgid "Acc&ept Uncheckable Passwords" msgstr "확인 불가능 암호 허용(&E)" -#: src/include/users/ldap_dialogs.rb:274 +#: src/include/users/ldap_dialogs.rb:274 msgid "&Only Accept Checked Passwords" msgstr "확인된 암호만 허용(&O)" -#. IntField label -#: src/include/users/ldap_dialogs.rb:284 +#. IntField label +#: src/include/users/ldap_dialogs.rb:284 msgid "&Minimum Password Length" msgstr "최소 암호 길이(&M)" -#. frame label -#: src/include/users/ldap_dialogs.rb:373 +#. frame label +#: src/include/users/ldap_dialogs.rb:373 msgid "Minimum Password Age" msgstr "최소 암호 수명" -#. frame label -#: src/include/users/ldap_dialogs.rb:376 +#. frame label +#: src/include/users/ldap_dialogs.rb:376 msgid "Maximum Password Age" msgstr "최대 암호 수명" -#. frame label -#: src/include/users/ldap_dialogs.rb:381 +#. frame label +#: src/include/users/ldap_dialogs.rb:381 msgid "Time before Password Expiration to Issue Warning" msgstr "암호 만료 이전에 경고를 발행할 시간" -#. IntField label -#: src/include/users/ldap_dialogs.rb:387 +#. IntField label +#: src/include/users/ldap_dialogs.rb:387 msgid "Allowed Uses of an Expired Password" msgstr "만료되는 암호에 허용된 사용 횟수" -#. check box label -#: src/include/users/ldap_dialogs.rb:416 +#. check box label +#: src/include/users/ldap_dialogs.rb:416 msgid "Enable Password Locking" msgstr "암호 잠금 활성화" -#. intField label -#: src/include/users/ldap_dialogs.rb:424 +#. intField label +#: src/include/users/ldap_dialogs.rb:424 msgid "Bind Failures to Lock the Password" msgstr "암호 잠금 바인딩 실패 횟수" -#. frame label -#: src/include/users/ldap_dialogs.rb:434 +#. frame label +#: src/include/users/ldap_dialogs.rb:434 msgid "Password Lock Duration" msgstr "암호 잠금 기간" -#. frame label -#: src/include/users/ldap_dialogs.rb:440 +#. frame label +#: src/include/users/ldap_dialogs.rb:440 msgid "Bind Failures Cache Duration" msgstr "바인딩 실패 캐시 기간" -#. dialog label -#: src/include/users/ldap_dialogs.rb:471 +#. dialog label +#: src/include/users/ldap_dialogs.rb:471 msgid "Password Policy Configuration" msgstr "암호 정책 구성" -#. error popup, %1 is attribute name -#: src/include/users/ldap_dialogs.rb:535 +#. error popup, %1 is attribute name +#: src/include/users/ldap_dialogs.rb:535 msgid "" "The \"%1\" attribute is mandatory.\n" "Enter a value." @@ -2165,13 +1972,13 @@ "\"%1\"은(는) 필수 특성입니다.\n" "값을 입력하십시오." -#. read the list of pwdpolicy objects under base_config_dn -#: src/include/users/ldap_dialogs.rb:666 +#. read the list of pwdpolicy objects under base_config_dn +#: src/include/users/ldap_dialogs.rb:666 msgid "<p><b>Home Directories</b></p>" msgstr "<p><b>홈 디렉토리</b></p>" -#. help text -#: src/include/users/ldap_dialogs.rb:668 +#. help text +#: src/include/users/ldap_dialogs.rb:668 msgid "" "<p>If home directories of LDAP users should be stored on this machine,\n" "check the appropriate option. Changing this value does not cause any direct\n" @@ -2180,79 +1987,72 @@ msgstr "" "<p>LDAP 사용자의 홈 디렉토리를 이 컴퓨터에 저장해야 하는 경우\n" "해당 옵션을 선택하십시오. 이 값을 변경해도 직접적인\n" -"작업은 발생하지 않습니다. 사용자 홈 디렉토리를 관리할 수 있는 YaST 사용자 모" -"듈에 대한 정보일 뿐입니다.</p>\n" +"작업은 발생하지 않습니다. 사용자 홈 디렉토리를 관리할 수 있는 YaST 사용자 모듈에 대한 정보일 뿐입니다.</p>\n" -#. help text caption -#. help text -#: src/include/users/ldap_dialogs.rb:675 +#. help text caption +#. help text +#: src/include/users/ldap_dialogs.rb:675 msgid "" "<p>Press <b>Configure</b> to configure settings stored on the\n" -"LDAP server. You will be asked for the password if you are not connected yet " -"or\n" +"LDAP server. You will be asked for the password if you are not connected yet or\n" "have changed your configuration.</p>\n" msgstr "" "<p>LDAP 서버상에 저장된 설정 셋팅들을 위해서 <b>설정</b>을 누르세요. \n" "여러분은 아직 서버에 접속하지 못했거나 여러분의 설정을 변경하지 못했을때 \n" "그 패스워드를 요청할 것 입니다.</p>\n" -#. password policy help text caption -#: src/include/users/ldap_dialogs.rb:681 +#. password policy help text caption +#: src/include/users/ldap_dialogs.rb:681 msgid "<p><b>Password Policy</b></p>" msgstr "<p><b>암호 정책</b></p>" -#. password policy help -#: src/include/users/ldap_dialogs.rb:683 +#. password policy help +#: src/include/users/ldap_dialogs.rb:683 msgid "" -"<p>Configure the selected password policy with <b>Edit</b>. Use <b>Add</b> " -"to add a new password policy. The configuration is only possible,\n" +"<p>Configure the selected password policy with <b>Edit</b>. Use <b>Add</b> to add a new password policy. The configuration is only possible,\n" " if the password policies are already enabled on the LDAP server.</p>" msgstr "" -"<p><b>편집</b>을 사용하여 선택한 비밀번호 정책을 구성합니다. <b>추가</b>를 사" -"용하여 새 비밀번호 정책을 추가합니다. 비밀번호 정책이 이미 LDAP 서버에서 활성" -"화된 경우에만\n" +"<p><b>편집</b>을 사용하여 선택한 비밀번호 정책을 구성합니다. <b>추가</b>를 사용하여 새 비밀번호 정책을 추가합니다. 비밀번호 정책이 이미 LDAP 서버에서 활성화된 경우에만\n" "구성을 수행할 수 있습니다.</p>" -#. checkbox label -#: src/include/users/ldap_dialogs.rb:693 +#. checkbox label +#: src/include/users/ldap_dialogs.rb:693 msgid "&Home Directories on This Machine" msgstr "이 컴퓨터의 홈 디렉토리(&H)" -#. pushbutton label -#: src/include/users/ldap_dialogs.rb:702 +#. pushbutton label +#: src/include/users/ldap_dialogs.rb:702 msgid "Configure User Management &Settings..." msgstr "사용자 관리 설정 구성(&S)..." -#. table header -#: src/include/users/ldap_dialogs.rb:711 +#. table header +#: src/include/users/ldap_dialogs.rb:711 msgid "Password Policy" msgstr "암호 정책" -#. dialog title -#: src/include/users/ldap_dialogs.rb:727 +#. dialog title +#: src/include/users/ldap_dialogs.rb:727 msgid "LDAP Administration Settings" msgstr "LDAP 관리 설정" -#. InputField label -#: src/include/users/ldap_dialogs.rb:754 +#. InputField label +#: src/include/users/ldap_dialogs.rb:754 msgid "Name of Password Policy Object" msgstr "암호 정책 개체의 이름" -#. text label,suffix will follow in next label -#. text label,suffix will follow in next label -#: src/include/users/ldap_dialogs.rb:760 -#: src/include/users/ldap_dialogs.rb:796 +#. text label,suffix will follow in next label +#. text label,suffix will follow in next label +#: src/include/users/ldap_dialogs.rb:760 src/include/users/ldap_dialogs.rb:796 msgid "Suffix:" msgstr "접미사:" -#. pushbutton label -#. pushbutton label -#: src/include/users/ldap_dialogs.rb:763 -#: src/include/users/ldap_dialogs.rb:799 +#. pushbutton label +#. pushbutton label +#: src/include/users/ldap_dialogs.rb:763 src/include/users/ldap_dialogs.rb:799 msgid "Change Suffix" msgstr "접미사 변경" -#: src/include/users/ldap_dialogs.rb:812 +#: src/include/users/ldap_dialogs.rb:812 msgid "" "The Policy '%1' already exists.\n" "Please select another one." @@ -2260,240 +2060,240 @@ "'%1' 정책이 이미 존재합니다.\n" "다른 정책을 선택하십시오." -#. the type of user set -#: src/include/users/widgets.rb:61 +#. the type of user set +#: src/include/users/widgets.rb:61 msgid "&System Users" msgstr "시스템 사용자(&S)" -#. the type of user set -#: src/include/users/widgets.rb:63 +#. the type of user set +#: src/include/users/widgets.rb:63 msgid "&Local Users" msgstr "로컬 사용자(&L)" -#. the type of user set -#: src/include/users/widgets.rb:65 +#. the type of user set +#: src/include/users/widgets.rb:65 msgid "&NIS Users" msgstr "NIS 사용자(&U)" -#. the type of user set -#: src/include/users/widgets.rb:67 +#. the type of user set +#: src/include/users/widgets.rb:67 msgid "L&DAP Users" msgstr "LDAP 사용자(&D)" -#. the type of user set -#: src/include/users/widgets.rb:69 +#. the type of user set +#: src/include/users/widgets.rb:69 msgid "Sam&ba Users" msgstr "Samba 사용자(&B)" -#. the type of user set -#. the type of group set -#: src/include/users/widgets.rb:71 src/include/users/widgets.rb:103 +#. the type of user set +#. the type of group set +#: src/include/users/widgets.rb:71 src/include/users/widgets.rb:103 msgid "&Custom" msgstr "사용자 설정(&C)" -#. the type of user set -#: src/include/users/widgets.rb:77 +#. the type of user set +#: src/include/users/widgets.rb:77 msgid "System Users" msgstr "시스템 사용자" -#. the type of user set -#. New user is the default option -#: src/include/users/widgets.rb:79 -#: src/lib/users/dialogs/inst_user_first.rb:279 +#. the type of user set +#. New user is the default option +#: src/include/users/widgets.rb:79 +#: src/lib/users/dialogs/inst_user_first.rb:279 msgid "Local Users" msgstr "로컬 사용자" -#. the type of user set -#: src/include/users/widgets.rb:81 +#. the type of user set +#: src/include/users/widgets.rb:81 msgid "NIS Users" msgstr "NIS 사용자" -#. the type of user set -#: src/include/users/widgets.rb:83 +#. the type of user set +#: src/include/users/widgets.rb:83 msgid "LDAP Users" msgstr "LDAP 사용자" -#. the type of user set -#: src/include/users/widgets.rb:85 +#. the type of user set +#: src/include/users/widgets.rb:85 msgid "Samba Users" msgstr "Samba 사용자" -#. the type of user set -#. the type of group set -#: src/include/users/widgets.rb:87 src/include/users/widgets.rb:118 +#. the type of user set +#. the type of group set +#: src/include/users/widgets.rb:87 src/include/users/widgets.rb:118 msgid "Custom" msgstr "사용자 정의" -#. the type of group set -#: src/include/users/widgets.rb:93 +#. the type of group set +#: src/include/users/widgets.rb:93 msgid "&System Groups" msgstr "시스템 그룹(&S)" -#. the type of group set -#: src/include/users/widgets.rb:95 +#. the type of group set +#: src/include/users/widgets.rb:95 msgid "&Local Groups" msgstr "로컬 그룹(&L)" -#. the type of group set -#: src/include/users/widgets.rb:97 +#. the type of group set +#: src/include/users/widgets.rb:97 msgid "&NIS Groups" msgstr "NIS 그룹(&N)" -#. the type of group set -#: src/include/users/widgets.rb:99 +#. the type of group set +#: src/include/users/widgets.rb:99 msgid "L&DAP Groups" msgstr "LDAP 그룹(&D)" -#. the type of group set -#: src/include/users/widgets.rb:101 +#. the type of group set +#: src/include/users/widgets.rb:101 msgid "Sam&ba Groups" msgstr "삼바 그룹(&B)" -#. the type of group set -#: src/include/users/widgets.rb:108 +#. the type of group set +#: src/include/users/widgets.rb:108 msgid "System Groups" msgstr "시스템 그룹" -#. the type of group set -#: src/include/users/widgets.rb:110 +#. the type of group set +#: src/include/users/widgets.rb:110 msgid "Local Groups" msgstr "로컬 그룹" -#. the type of group set -#: src/include/users/widgets.rb:112 +#. the type of group set +#: src/include/users/widgets.rb:112 msgid "NIS Groups" msgstr "NIS 그룹" -#. the type of group set -#: src/include/users/widgets.rb:114 +#. the type of group set +#: src/include/users/widgets.rb:114 msgid "LDAP Groups" msgstr "LDAP 그룹" -#. the type of group set -#: src/include/users/widgets.rb:116 +#. the type of group set +#: src/include/users/widgets.rb:116 msgid "Samba Groups" msgstr "Samba 그룹" -#. richtext label -#: src/include/users/widgets.rb:136 +#. richtext label +#: src/include/users/widgets.rb:136 msgid "NIS" msgstr "NIS" -#. richtext label -#: src/include/users/widgets.rb:138 +#. richtext label +#: src/include/users/widgets.rb:138 msgid "SSSD" msgstr "SSSD" -#. richtext label -#: src/include/users/widgets.rb:140 +#. richtext label +#: src/include/users/widgets.rb:140 msgid "Samba" msgstr "Samba" -#. menubutton label -#: src/include/users/widgets.rb:147 +#. menubutton label +#: src/include/users/widgets.rb:147 msgid "&NIS" msgstr "NIS(&N)" -#. menubutton label -#: src/include/users/widgets.rb:153 +#. menubutton label +#: src/include/users/widgets.rb:153 msgid "&SSSD" msgstr "SSSD(&S)" -#. menubutton label -#: src/include/users/widgets.rb:159 +#. menubutton label +#: src/include/users/widgets.rb:159 msgid "&Samba" msgstr "Samba(&S)" -#. tab header -#: src/include/users/widgets.rb:168 +#. tab header +#: src/include/users/widgets.rb:168 msgid "&Users" msgstr "사용자(&U)" -#. tab header -#: src/include/users/widgets.rb:178 +#. tab header +#: src/include/users/widgets.rb:178 msgid "&Groups" msgstr "그룹(&G)" -#. tab header -#: src/include/users/widgets.rb:188 +#. tab header +#: src/include/users/widgets.rb:188 msgid "De&faults for New Users" msgstr "새로운 사용자의 기본값(&F)" -#. tab header -#: src/include/users/widgets.rb:224 +#. tab header +#: src/include/users/widgets.rb:224 msgid "&Authentication Settings" msgstr "인증 설정(&H)" -#. widgets for "users" and "groups" tabs --------------------------------- -#. MenuButton label -#: src/include/users/widgets.rb:257 src/include/users/widgets.rb:2225 +#. widgets for "users" and "groups" tabs --------------------------------- +#. MenuButton label +#: src/include/users/widgets.rb:257 src/include/users/widgets.rb:2225 msgid "&Set Filter" msgstr "필터 설정(&S)" -#. Menu Buton label -#. Menu Buton label -#: src/include/users/widgets.rb:291 src/include/users/widgets.rb:2008 +#. Menu Buton label +#. Menu Buton label +#: src/include/users/widgets.rb:291 src/include/users/widgets.rb:2008 msgid "E&xpert Options" msgstr "고급 옵션(&X)" -#. combobox label -#: src/include/users/widgets.rb:326 +#. combobox label +#: src/include/users/widgets.rb:326 msgid "D&efault Group" msgstr "기본 그룹(&E)" -#. combobox label -#: src/include/users/widgets.rb:333 +#. combobox label +#: src/include/users/widgets.rb:333 msgid "Default &Login Shell" msgstr "기본 로그인 쉘(&L)" -#. text entry -#: src/include/users/widgets.rb:344 +#. text entry +#: src/include/users/widgets.rb:344 msgid "Se&condary Groups" msgstr "보조 그룹(&C)" -#. text entry -#: src/include/users/widgets.rb:355 +#. text entry +#: src/include/users/widgets.rb:355 msgid "Path Prefix for &Home Directory" msgstr "홈 디렉토리의 경로 접두어(&H)" -#. push button label -#: src/include/users/widgets.rb:368 +#. push button label +#: src/include/users/widgets.rb:368 msgid "&Browse..." msgstr "찾아보기(&B)..." -#. text entry -#: src/include/users/widgets.rb:379 +#. text entry +#: src/include/users/widgets.rb:379 msgid "&Skeleton for Home Directory" msgstr "Skel 디렉토리 선택(&S)" -#. push button label -#: src/include/users/widgets.rb:390 +#. push button label +#: src/include/users/widgets.rb:390 msgid "Bro&wse..." msgstr "찾아보기(&W)..." -#. text entry -#: src/include/users/widgets.rb:401 +#. text entry +#: src/include/users/widgets.rb:401 msgid "Default E&xpiration Date" msgstr "기본 만료 일자(&E)" -#. text entry -#: src/include/users/widgets.rb:413 +#. text entry +#: src/include/users/widgets.rb:413 msgid "&Umask for Home Directory" msgstr "홈 디렉토리에 대한 U 마스크(&U)" -#. intfield -#: src/include/users/widgets.rb:420 +#. intfield +#: src/include/users/widgets.rb:420 msgid "Days &after Password Expiration Login Is Usable" msgstr "비밀번호 만료 후 로그인할 수 있는 기간(&A)" -#. menu button label -#. menu button label -#: src/include/users/widgets.rb:445 src/include/users/widgets.rb:2407 +#. menu button label +#. menu button label +#: src/include/users/widgets.rb:445 src/include/users/widgets.rb:2407 msgid "&Configure..." msgstr "구성(&N)..." -#. Help text for password expert dialog 1/5 -#: src/include/users/widgets.rb:459 +#. Help text for password expert dialog 1/5 +#: src/include/users/widgets.rb:459 msgid "" "<p>\n" "<b>This is for experts only.</b>\n" @@ -2503,13 +2303,12 @@ "<b>전문가만 사용할 수 있습니다.</b> \n" "</p>" -#. Help text for password expert dialog 2/5 -#: src/include/users/widgets.rb:468 +#. Help text for password expert dialog 2/5 +#: src/include/users/widgets.rb:468 msgid "" "<p>\n" "Choose a password encryption method for local and system users.\n" -"<b>DES</b>, the Linux default method, works in all network environments, but " -"it\n" +"<b>DES</b>, the Linux default method, works in all network environments, but it\n" "restricts passwords to eight characters or less.\n" "</p>\n" msgstr "" @@ -2519,8 +2318,8 @@ "8자 이하로 비밀번호를 제한합니다.\n" "</p>\n" -#. Help text for password expert dialog 3/5 -#: src/include/users/widgets.rb:480 +#. Help text for password expert dialog 3/5 +#: src/include/users/widgets.rb:480 msgid "" "<p>\n" "<b>MD5</b> allows longer passwords, so provides more security, but some\n" @@ -2529,51 +2328,46 @@ msgstr "" "<p>\n" "<b>MD5</b>를 선택하면 더 긴 비밀번호를 사용할 수 있으므로 더 안전합니다.\n" -" 그러나 일부 네트워크 프로토콜은 이를 지원하지 않으며 NIS와 문제가 생길 수 있" -"습니다.\n" +" 그러나 일부 네트워크 프로토콜은 이를 지원하지 않으며 NIS와 문제가 생길 수 있습니다.\n" " </p>" -#. Help text for password expert dialog 4/5 -#: src/include/users/widgets.rb:491 -msgid "" -"<p><b>SHA-512</b> is the current standard hash method. Using other " -"algorithms is not recommended unless needed for compatibility purposes.</p>" -msgstr "" -"<p><b>SHA-512</b>는 현재 표준 해시 방법입니다. 호환성 목적에 필요하지 않은 경" -"우 다른 알고리즘을 사용하는 것이 좋습니다.</p>" +#. Help text for password expert dialog 4/5 +#: src/include/users/widgets.rb:491 +msgid "<p><b>SHA-512</b> is the current standard hash method. Using other algorithms is not recommended unless needed for compatibility purposes.</p>" +msgstr "<p><b>SHA-512</b>는 현재 표준 해시 방법입니다. 호환성 목적에 필요하지 않은 경우 다른 알고리즘을 사용하는 것이 좋습니다.</p>" -#. Label -#: src/include/users/widgets.rb:499 +#. Label +#: src/include/users/widgets.rb:499 msgid "Password Encryption" msgstr "비밀번호 암호화" -#. frame label -#: src/include/users/widgets.rb:507 +#. frame label +#: src/include/users/widgets.rb:507 msgid "Encryption Type" msgstr "암호화 형식" -#. Radio buttons for password encryption: DES-crypt -#: src/include/users/widgets.rb:513 +#. Radio buttons for password encryption: DES-crypt +#: src/include/users/widgets.rb:513 msgid "&DES" msgstr "DES(&D)" -#. Radio buttons for password encryption: MD5-crypt -#: src/include/users/widgets.rb:515 +#. Radio buttons for password encryption: MD5-crypt +#: src/include/users/widgets.rb:515 msgid "&MD5" msgstr "MD5(&M)" -#. Radio buttons for password encryption: sha256 crypt -#: src/include/users/widgets.rb:520 +#. Radio buttons for password encryption: sha256 crypt +#: src/include/users/widgets.rb:520 msgid "SHA-&256" msgstr "SHA-256(&2)" -#. Radio buttons for password encryption: sha512 crypt -#: src/include/users/widgets.rb:528 +#. Radio buttons for password encryption: sha512 crypt +#: src/include/users/widgets.rb:528 msgid "SHA-&512" msgstr "SHA-512(&5)" -#. help text 1/3 -#: src/include/users/widgets.rb:582 +#. help text 1/3 +#: src/include/users/widgets.rb:582 msgid "" "<p>\n" "You have changed the default encryption for user passwords.</p>" @@ -2581,11 +2375,10 @@ "<p>\n" "사용자 비밀번호에 대한 기본 암호화를 변경했습니다.</p>" -#. help text 2/3 -#: src/include/users/widgets.rb:586 +#. help text 2/3 +#: src/include/users/widgets.rb:586 msgid "" -"<p>It seems that you are running a NIS server. In some network " -"environments,\n" +"<p>It seems that you are running a NIS server. In some network environments,\n" "you might be unable to log in to a NIS client when a user password is\n" "encrypted with a method other than DES.\n" "</p>\n" @@ -2595,49 +2388,44 @@ "NIS 클라이언트에 로그인하지 못할 수도 있습니다.\n" "</p>\n" -#. help text 3/3 -#: src/include/users/widgets.rb:593 +#. help text 3/3 +#: src/include/users/widgets.rb:593 msgid "<p>Really use the selected method?</p>" msgstr "<p>선택한 방법을 사용하시겠습니까?</p>" -#. combo box item -#: src/include/users/widgets.rb:719 +#. combo box item +#: src/include/users/widgets.rb:719 msgid "AND" msgstr "그리고" -#. combo box item -#: src/include/users/widgets.rb:721 +#. combo box item +#: src/include/users/widgets.rb:721 msgid "OR" msgstr "또는" -#. helptext 1/4 - caption -#: src/include/users/widgets.rb:728 +#. helptext 1/4 - caption +#: src/include/users/widgets.rb:728 msgid "<p><b>LDAP Search Filter Changes</b></p>" msgstr "<p><b>LDAP 검색 필터 변경</b></p>" -#. helptext 2/4 -#: src/include/users/widgets.rb:730 -msgid "" -"<p>Here, extend the search filters for users and groups beyond the default " -"search filters.</p>" -msgstr "" -"<p>여기에서, 기본 검색 필터들의 범위를 넘어서 사용자와 그룹의 검색 필터를 확" -"장합니다." +#. helptext 2/4 +#: src/include/users/widgets.rb:730 +msgid "<p>Here, extend the search filters for users and groups beyond the default search filters.</p>" +msgstr "<p>여기에서, 기본 검색 필터들의 범위를 넘어서 사용자와 그룹의 검색 필터를 확장합니다." -#. helptext 3/4 -#: src/include/users/widgets.rb:734 +#. helptext 3/4 +#: src/include/users/widgets.rb:734 msgid "" "<p>With <b>Default</b>, load the default filter from the user and group\n" -"configuration modules saved on the LDAP server (values of 'suseSearchFilter' " -"attributes).\n" +"configuration modules saved on the LDAP server (values of 'suseSearchFilter' attributes).\n" "If you are not connected yet, you are prompted for the password.</p>\n" msgstr "" "<p><b>기본</b>을 선택하면 LDAP 서버에 저장된 사용자 및 그룹 구성\n" "모듈로부터 기본 필터를 로드할 수 있습니다('susesearchfilter' 속성의 값).\n" " 아직 연결되어 있지 않으면 비밀번호를 입력하라는 메시지가 나타납니다.</p>\n" -#. helptext 4/4 (do not translate the value (written as <tt> font)) -#: src/include/users/widgets.rb:740 +#. helptext 4/4 (do not translate the value (written as <tt> font)) +#: src/include/users/widgets.rb:740 msgid "" "<p><b>Example:</b>\n" "<br>With the user filter\n" @@ -2653,54 +2441,54 @@ " <br>\n" " 사용자 이름이 'u'로 시작하는 사용자 목록만 가져올 수 있습니다.</p>\n" -#. radiobutton label -#: src/include/users/widgets.rb:763 +#. radiobutton label +#: src/include/users/widgets.rb:763 msgid "Search Filter for &Users" msgstr "사용자 검색 필터(&U)" -#. radiobutton label -#: src/include/users/widgets.rb:772 +#. radiobutton label +#: src/include/users/widgets.rb:772 msgid "Search Filter for &Groups" msgstr "그룹 검색 필터(&G)" -#. frame label -#: src/include/users/widgets.rb:783 +#. frame label +#: src/include/users/widgets.rb:783 msgid "New Condition for Current Filter" msgstr "현재 필터에 대한 새 조건" -#. combobox label -#. combobox label -#: src/include/users/widgets.rb:795 src/include/users/widgets.rb:949 +#. combobox label +#. combobox label +#: src/include/users/widgets.rb:795 src/include/users/widgets.rb:949 msgid "&Attribute" msgstr "속성(&A)" -#. textentry label -#: src/include/users/widgets.rb:803 +#. textentry label +#: src/include/users/widgets.rb:803 msgid "&Value" msgstr "값(&V)" -#. pushbuttton label -#: src/include/users/widgets.rb:806 +#. pushbuttton label +#: src/include/users/widgets.rb:806 msgid "A&dd to Filter" msgstr "필터에 추가(&D)" -#. Pushbutton label -#: src/include/users/widgets.rb:817 +#. Pushbutton label +#: src/include/users/widgets.rb:817 msgid "De&fault" msgstr "기본(&F)" -#. error popup -#: src/include/users/widgets.rb:852 +#. error popup +#: src/include/users/widgets.rb:852 msgid "Enter the value for the attribute." msgstr "속성 값을 입력하십시오." -#. error popup -#: src/include/users/widgets.rb:876 +#. error popup +#: src/include/users/widgets.rb:876 msgid "Enter the value of the user filter." msgstr "사용자 필터의 값을 입력하십시오." -#. yes/no popup question -#: src/include/users/widgets.rb:887 +#. yes/no popup question +#: src/include/users/widgets.rb:887 msgid "" "The new user filter does not contain the default user filter.\n" "Really use it?\n" @@ -2708,13 +2496,13 @@ "새 사용자 필터에 기본 사용자 필터가 포함되지 않았습니다.\n" "이것을 사용하시겠습니까?\n" -#. error popup -#: src/include/users/widgets.rb:902 +#. error popup +#: src/include/users/widgets.rb:902 msgid "Enter the value of the group filter." msgstr "그룹 필터의 값을 입력하십시오." -#. yes/no popup question -#: src/include/users/widgets.rb:913 +#. yes/no popup question +#: src/include/users/widgets.rb:913 msgid "" "The new group filter does not contain the default group filter.\n" "Really use it?\n" @@ -2722,75 +2510,69 @@ "새 그룹 필터에 기본 그룹 필터가 포함되지 않았습니다.\n" "이것을 사용하시겠습니까?\n" -#. helptext 0/3 - caption -#: src/include/users/widgets.rb:967 +#. helptext 0/3 - caption +#: src/include/users/widgets.rb:967 msgid "<p><b>Login Settings</b></p>" msgstr "<p><b>로그인 설정</b></p>" -#. helptext 1/3 - general info -#: src/include/users/widgets.rb:969 +#. helptext 1/3 - general info +#: src/include/users/widgets.rb:969 msgid "" "<p>\n" -"The features described below are only available if you are using KDM or GDM " -"as the login manager.\n" +"The features described below are only available if you are using KDM or GDM as the login manager.\n" "</p>\n" msgstr "" "<p>\n" -"로그인 관리자로 KDM 또는 GDM을 사용할 경우에만 아래 설명한 기능을 사용할 수 " -"있습니다.\n" +"로그인 관리자로 KDM 또는 GDM을 사용할 경우에만 아래 설명한 기능을 사용할 수 있습니다.\n" " </p>\n" -#. helptext 2/3 -#: src/include/users/widgets.rb:975 +#. helptext 2/3 +#: src/include/users/widgets.rb:975 msgid "" "<p><b>Auto Login</b><br>\n" -"By setting <b>Auto Login</b>, skip the login procedure. The user chosen from " -"the list is logged in automatically.</p>\n" +"By setting <b>Auto Login</b>, skip the login procedure. The user chosen from the list is logged in automatically.</p>\n" msgstr "" "<p><b>자동 로그인</b><br>\n" -"<b>자동 로그인</b>을 설정하면 로그인 절차를 생략할 수 있습니다. 목록에서 선택" -"한 사용자는 자동으로 로그인할 수 있습니다.</p>\n" +"<b>자동 로그인</b>을 설정하면 로그인 절차를 생략할 수 있습니다. 목록에서 선택한 사용자는 자동으로 로그인할 수 있습니다.</p>\n" -#. helptext 3/3 -#: src/include/users/widgets.rb:979 +#. helptext 3/3 +#: src/include/users/widgets.rb:979 msgid "" "<p><b>Passwordless Logins</b><br>\n" "If this option is checked, all users are allowed to log in without entering\n" -"passwords. Otherwise, you are asked for the password even if you set a user " -"to log in automatically.</p>\n" +"passwords. Otherwise, you are asked for the password even if you set a user to log in automatically.</p>\n" msgstr "" "<p><b>비밀번호 없이 로그인</b><br>\n" "이 옵션을 선택하면 모든 사용자가 비밀번호를 입력하지 않고 로그인할 수\n" -" 있습니다. 이것을 선택하지 않으면 자동으로 로그인하도록 사용자를 설정해도 비" -"밀번호를 지정해야 합니다.</p>\n" +" 있습니다. 이것을 선택하지 않으면 자동으로 로그인하도록 사용자를 설정해도 비밀번호를 지정해야 합니다.</p>\n" -#. dialog label -#: src/include/users/widgets.rb:1004 +#. dialog label +#: src/include/users/widgets.rb:1004 msgid "Display Manager Login Settings" msgstr "디스플레이 관리자 로그인 설정" -#. checkbox label -#: src/include/users/widgets.rb:1014 +#. checkbox label +#: src/include/users/widgets.rb:1014 msgid "&Auto Login" msgstr "자동 로그인(&A)" -#. textentry label -#: src/include/users/widgets.rb:1025 +#. textentry label +#: src/include/users/widgets.rb:1025 msgid "&User to Log In" msgstr "로그인할 사용자(&U)" -#. checkbox label -#: src/include/users/widgets.rb:1035 +#. checkbox label +#: src/include/users/widgets.rb:1035 msgid "Password&less Logins" msgstr "비밀번호 없이 로그인(&L)" -#. error popup -#: src/include/users/widgets.rb:1126 +#. error popup +#: src/include/users/widgets.rb:1126 msgid "Cannot delete the user %1. It must be done on the NIS server." msgstr "%1 사용자를 지울 수 없습니다. NIS 서버상에서 해야 합니다." -#. Continue/Cancel popup -#: src/include/users/widgets.rb:1135 +#. Continue/Cancel popup +#: src/include/users/widgets.rb:1135 msgid "" "The user seems to be currently logged in.\n" "Continue anyway?" @@ -2798,23 +2580,23 @@ "사용자가 현재 로그인된 것 같습니다.\n" "계속하시겠습니까?" -#. yes-no popup headline -#: src/include/users/widgets.rb:1157 +#. yes-no popup headline +#: src/include/users/widgets.rb:1157 msgid "Selected User Is System User" msgstr "선택한 사용자는 시스템 사용자입니다." -#. yes-no popup contents -#: src/include/users/widgets.rb:1159 +#. yes-no popup contents +#: src/include/users/widgets.rb:1159 msgid "Really delete this system user?" msgstr "이 시스템 사용자를 삭제하시겠습니까?" -#. question popup. %1 is username -#: src/include/users/widgets.rb:1171 +#. question popup. %1 is username +#: src/include/users/widgets.rb:1171 msgid "Delete the user %1?" msgstr "%1 사용자 삭제" -#. checkbox label -#: src/include/users/widgets.rb:1178 +#. checkbox label +#: src/include/users/widgets.rb:1178 msgid "" "Delete &Home Directory\n" "%1\n" @@ -2822,8 +2604,8 @@ "홈 디렉토리 삭제(&H)\n" "%1\n" -#. yes-no popup. %1 is username -#: src/include/users/widgets.rb:1201 +#. yes-no popup. %1 is username +#: src/include/users/widgets.rb:1201 msgid "" "\n" "Really delete the user %1?\n" @@ -2831,18 +2613,18 @@ "\n" "%1 사용자를 삭제하시겠습니까?\n" -#. yes-no popup headline -#: src/include/users/widgets.rb:1230 +#. yes-no popup headline +#: src/include/users/widgets.rb:1230 msgid "System Group" msgstr "시스템 그룹" -#. / yes-no popup contents -#: src/include/users/widgets.rb:1232 +#. / yes-no popup contents +#: src/include/users/widgets.rb:1232 msgid "Really delete this system group?" msgstr "이 시스템 그룹을 삭제하시겠습니까?" -#. yes-no popup, %1 si group name -#: src/include/users/widgets.rb:1240 +#. yes-no popup, %1 si group name +#: src/include/users/widgets.rb:1240 msgid "" "\n" "Really delete the group %1?\n" @@ -2850,8 +2632,8 @@ "\n" "%1 그룹을 삭제하시겠습니까?\n" -#. warning popup -#: src/include/users/widgets.rb:1250 +#. warning popup +#: src/include/users/widgets.rb:1250 msgid "" "You cannot delete this group because\n" "there are users in the group.\n" @@ -2861,81 +2643,80 @@ "그룹을 삭제 할수 없습니다.\n" "먼저, 그룹에 속한 사용자를 삭제하십시오.\n" -#. Frame label -#: src/include/users/widgets.rb:1280 +#. Frame label +#: src/include/users/widgets.rb:1280 msgid "User List View" msgstr "사용자 목록 보기" -#. Frame label -#: src/include/users/widgets.rb:1288 +#. Frame label +#: src/include/users/widgets.rb:1288 msgid "Group List View" msgstr "그룹 목록 보기" -#. type of user/group -#. (item of list with the headline 'Choose the type of user to add') -#: src/include/users/widgets.rb:1360 +#. type of user/group +#. (item of list with the headline 'Choose the type of user to add') +#: src/include/users/widgets.rb:1360 msgid "Local" msgstr "로컬" -#. type of user/group -#. (item of list with the headline 'Choose the type of user to add') -#: src/include/users/widgets.rb:1365 +#. type of user/group +#. (item of list with the headline 'Choose the type of user to add') +#: src/include/users/widgets.rb:1365 msgid "LDAP" msgstr "LDAP" -#. type of user/group -#. (item of list with the headline 'Choose the type of user to add') -#: src/include/users/widgets.rb:1370 +#. type of user/group +#. (item of list with the headline 'Choose the type of user to add') +#: src/include/users/widgets.rb:1370 msgid "System" msgstr "시스템" -#. label -#: src/include/users/widgets.rb:1379 +#. label +#: src/include/users/widgets.rb:1379 msgid "User Type" msgstr "사용자 유형" -#. label -#: src/include/users/widgets.rb:1381 +#. label +#: src/include/users/widgets.rb:1381 msgid "Group Type" msgstr "그룹 유형" -#. menubutton item -#. menubutton item -#: src/include/users/widgets.rb:1448 src/include/users/widgets.rb:1460 +#. menubutton item +#. menubutton item +#: src/include/users/widgets.rb:1448 src/include/users/widgets.rb:1460 msgid "Customi&ze Filter..." msgstr "필터 사용자 정의(&Z)..." -#. menubutton label -#: src/include/users/widgets.rb:1473 +#. menubutton label +#: src/include/users/widgets.rb:1473 msgid "&Login Settings" msgstr "로그인 설정(&L)" -#. menubutton label -#: src/include/users/widgets.rb:1480 +#. menubutton label +#: src/include/users/widgets.rb:1480 msgid "Password &Encryption" msgstr "비밀번호 암호화(&E)" -#. menubutton label -#: src/include/users/widgets.rb:1486 +#. menubutton label +#: src/include/users/widgets.rb:1486 msgid "&Write Changes Now" msgstr "지금 변경 내용 쓰기(&W)" -#. menubutton label -#: src/include/users/widgets.rb:1500 +#. menubutton label +#: src/include/users/widgets.rb:1500 msgid "LDAP &Search Filter" msgstr "LDAP 검색 필터(&S)" -#. menubutton label -#: src/include/users/widgets.rb:1505 +#. menubutton label +#: src/include/users/widgets.rb:1505 msgid "L&DAP User and Group Configuration" msgstr "LDAP 사용자 및 그룹 구성(&D)" -#. help text 1/1 -#: src/include/users/widgets.rb:1518 +#. help text 1/1 +#: src/include/users/widgets.rb:1518 msgid "" "<p>\n" -"Linux is a multiuser system. Several different users can be logged in to " -"the\n" +"Linux is a multiuser system. Several different users can be logged in to the\n" "system at the same time. To avoid confusion, each user must have\n" "a unique identity. Additionally, every user belongs to at least one group.\n" "</p>\n" @@ -2946,26 +2727,23 @@ " 합니다. 또한 각 사용자는 최소한 하나의 그룹에 속하게 됩니다.\n" " </p>\n" -#. help text 1/3 -#: src/include/users/widgets.rb:1535 +#. help text 1/3 +#: src/include/users/widgets.rb:1535 msgid "" "<p>\n" -"Users and groups are arranged in various sets. Change the set currently " -"shown in the table with <b>Set Filter</b>.\n" +"Users and groups are arranged in various sets. Change the set currently shown in the table with <b>Set Filter</b>.\n" "Customize your view with <b>Customize Filter</b>.</p>\n" msgstr "" "<p>\n" -"다양한 설정을 사용하여 사용자와 그룹을 정렬할 수 있습니다. <b>필터 설정</b>" -"을 사용하여 테이블에 현재 보이는 설정을 변경하고,\n" +"다양한 설정을 사용하여 사용자와 그룹을 정렬할 수 있습니다. <b>필터 설정</b>을 사용하여 테이블에 현재 보이는 설정을 변경하고,\n" " <b>필터 사용자 정의</b>를 사용하여 보기를 사용자 정의합니다.</p>\n" -#. help text 2/3 -#: src/include/users/widgets.rb:1541 +#. help text 2/3 +#: src/include/users/widgets.rb:1541 msgid "" "<p>\n" "Click <b>Expert Options</b> to edit various expert settings, such as\n" -"password encryption type, user authentication method, default values for " -"new\n" +"password encryption type, user authentication method, default values for new\n" "users, or login settings. With <b>Write Changes Now</b>, save\n" "all changes made so far without exiting the configuration module.</p>\n" msgstr "" @@ -2973,11 +2751,10 @@ "<b>고급 옵션</b>을 클릭하면 비밀번호 암호화 형식, 사용자 인증 방법,\n" " 새 사용자의 기본값, 로그인 설정 등 다양한 고급 설정을 편집할 수\n" " 있습니다. <b>지금 변경 내용 쓰기</b>를 사용하면\n" -" 구성 모듈을 종료하지 않고도 지금까지의 모든 변경 내용을 저장할 수 있습니다." -"</p>\n" +" 구성 모듈을 종료하지 않고도 지금까지의 모든 변경 내용을 저장할 수 있습니다.</p>\n" -#. help text 3/3, %1 is translated button label -#: src/include/users/widgets.rb:1550 +#. help text 3/3, %1 is translated button label +#: src/include/users/widgets.rb:1550 msgid "" "<p>\n" "To save the modified user and group settings to your system, press\n" @@ -2989,8 +2766,8 @@ " <b>%1</b>을(를) 누르십시오.\n" " </p>\n" -#. help text 1/4 -#: src/include/users/widgets.rb:1571 +#. help text 1/4 +#: src/include/users/widgets.rb:1571 msgid "" "\n" "<p>\n" @@ -3000,13 +2777,12 @@ msgstr "" "\n" "<p>\n" -" 기존 사용자에 대한 정보를 가져오고 사용자를 추가 또는 수정하려면 이 대화 상" -"자를\n" +" 기존 사용자에 대한 정보를 가져오고 사용자를 추가 또는 수정하려면 이 대화 상자를\n" " 사용하십시오. \n" " </p>\n" -#. help text 2/4 -#: src/include/users/widgets.rb:1580 +#. help text 2/4 +#: src/include/users/widgets.rb:1580 msgid "" "<p>\n" "To shift to the group dialog, select <b>Groups</b>.\n" @@ -3016,8 +2792,8 @@ "그룹 대화상자로 이동하려면, <b>그룹 관리자</b>를 선택하십시오.\n" "</p>\n" -#. help text 3/4 -#: src/include/users/widgets.rb:1587 +#. help text 3/4 +#: src/include/users/widgets.rb:1587 msgid "" "\n" "<p>\n" @@ -3029,8 +2805,8 @@ " 새 사용자를 생성하려면 <b>추가</b>를 클릭하십시오.\n" " </p>\n" -#. help text 4/4 -#: src/include/users/widgets.rb:1595 +#. help text 4/4 +#: src/include/users/widgets.rb:1595 msgid "" "<p>\n" "To edit or delete an existing user, select one user from the list and\n" @@ -3042,23 +2818,21 @@ "사용자를 선택 후 <b>편집</b> 또는 <b>삭제</b>를 클릭하십시오.\n" "</p>\n" -#. help text 1/4 -#: src/include/users/widgets.rb:1616 +#. help text 1/4 +#: src/include/users/widgets.rb:1616 msgid "" "\n" "<p>\n" -"Use this dialog to get information about existing groups and add or modify " -"groups.\n" +"Use this dialog to get information about existing groups and add or modify groups.\n" "</p>\n" msgstr "" "\n" "<p>\n" -" 기존 그룹에 대한 정보를 가져오고 그룹을 추가 또는 수정하려면 이 대화 상자를 " -"사용하십시오.\n" +" 기존 그룹에 대한 정보를 가져오고 그룹을 추가 또는 수정하려면 이 대화 상자를 사용하십시오.\n" " </p>\n" -#. help text 2/4 -#: src/include/users/widgets.rb:1624 +#. help text 2/4 +#: src/include/users/widgets.rb:1624 msgid "" "<p>\n" "To shift to the user dialog, select <b>Users</b>.\n" @@ -3068,8 +2842,8 @@ "사용자 대화상자로 이동하려면, <b>사용자</b>를 선택하십시오.\n" "</p>\n" -#. help text 3/4 -#: src/include/users/widgets.rb:1631 +#. help text 3/4 +#: src/include/users/widgets.rb:1631 msgid "" "\n" "<p>\n" @@ -3081,8 +2855,8 @@ " 새 그룹을 생성하려면 <b>추가</b>를 클릭하십시오.\n" " </p>\n" -#. help text 4/4 -#: src/include/users/widgets.rb:1639 +#. help text 4/4 +#: src/include/users/widgets.rb:1639 msgid "" "<p>\n" "To edit or delete an existing group, select one group from the list and\n" @@ -3094,8 +2868,8 @@ " <b>편집</b> 또는 <b>삭제</b>를 클릭하십시오.\n" " </p>\n" -#. popup error label -#: src/include/users/widgets.rb:1679 +#. popup error label +#: src/include/users/widgets.rb:1679 msgid "" "The entered home directory skeleton is not a directory.\n" "Try again.\n" @@ -3103,8 +2877,8 @@ "입력된 홈 디렉토리 골격은 디렉토리가 아닙니다.\n" "다시 입력하십시오.\n" -#. error message -#: src/include/users/widgets.rb:1697 +#. error message +#: src/include/users/widgets.rb:1697 msgid "" "The entered path prefix for home is not a directory.\n" "Try again.\n" @@ -3112,8 +2886,8 @@ "홈을 위해 입력된 경로 접두어는 디렉토리가 아닙니다.\n" "다시 시도하십시오\n" -#. yes/no popup -#: src/include/users/widgets.rb:1706 +#. yes/no popup +#: src/include/users/widgets.rb:1706 msgid "" "The selected directory does not exist.\n" "Create it now?\n" @@ -3121,8 +2895,8 @@ "선택된 디렉토리는 존재하지 않습니다.\n" "지금 생성하시겠습니까?\n" -#. error message -#: src/include/users/widgets.rb:1754 +#. error message +#: src/include/users/widgets.rb:1754 msgid "" "These groups do not exist in your system:\n" "%1\n" @@ -3132,8 +2906,8 @@ "%1\n" "다시 시도하십시오.\n" -#. Yes-No popup -#: src/include/users/widgets.rb:1779 +#. Yes-No popup +#: src/include/users/widgets.rb:1779 msgid "" "If you select a nonexistent shell, the user\n" "may be unable to log in. Continue?\n" @@ -3141,48 +2915,48 @@ "존재하지 않는 쉘을 선택하면\n" "로그인을 못할수도 있습니다. 계속하시겠습니까?\n" -#. directory location popup label -#: src/include/users/widgets.rb:1933 +#. directory location popup label +#: src/include/users/widgets.rb:1933 msgid "Path to Directory" msgstr "디렉토리 경로" -#. table header -#: src/include/users/widgets.rb:1965 +#. table header +#: src/include/users/widgets.rb:1965 msgid "Login" msgstr "로그인" -#. table header -#: src/include/users/widgets.rb:1967 +#. table header +#: src/include/users/widgets.rb:1967 msgid "Name" msgstr "이름" -#. table header -#: src/include/users/widgets.rb:1969 +#. table header +#: src/include/users/widgets.rb:1969 msgid "UID" msgstr "UID" -#. table header -#: src/include/users/widgets.rb:1971 +#. table header +#: src/include/users/widgets.rb:1971 msgid "Groups" msgstr "그룹" -#. table header -#: src/include/users/widgets.rb:1985 +#. table header +#: src/include/users/widgets.rb:1985 msgid "Group Name" msgstr "그룹 이름" -#. table header -#: src/include/users/widgets.rb:1987 +#. table header +#: src/include/users/widgets.rb:1987 msgid "Group ID" msgstr "그룹 ID" -#. table header -#: src/include/users/widgets.rb:1989 +#. table header +#: src/include/users/widgets.rb:1989 msgid "Group Members" msgstr "그룹 구성원" -#. error popup -#: src/include/users/widgets.rb:2069 +#. error popup +#: src/include/users/widgets.rb:2069 msgid "" "NIS groups can only be\n" "modified and deleted on the server.\n" @@ -3190,47 +2964,47 @@ "NIS 그룹에 대해서는 서버에서\n" "수정 또는 삭제만 할 수 있습니다.\n" -#. error popup -#: src/include/users/widgets.rb:2088 +#. error popup +#: src/include/users/widgets.rb:2088 msgid "Select an entry from the table." msgstr "테이블에서 항목을 선택하십시오." -#. popup message (user wants to save but there is no modification) -#: src/include/users/widgets.rb:2109 +#. popup message (user wants to save but there is no modification) +#: src/include/users/widgets.rb:2109 msgid "There are no changes to save." msgstr "저장할 변경 사항이 없습니다." -#. yes/no popup (data were changed) -#: src/include/users/widgets.rb:2151 +#. yes/no popup (data were changed) +#: src/include/users/widgets.rb:2151 msgid "Reread all data from LDAP server?" msgstr "LDAP 서버로 부터 모든 데이타를 다시 불러들일까요?" -#. label, e.g. 'Filter: Local Users', 'Filter: Custom' -#: src/include/users/widgets.rb:2219 +#. label, e.g. 'Filter: Local Users', 'Filter: Custom' +#: src/include/users/widgets.rb:2219 msgid "Filter: %1" msgstr "필터: %1" -#. wait popup -#. wait popup -#: src/include/users/widgets.rb:2253 src/include/users/widgets.rb:2284 +#. wait popup +#. wait popup +#: src/include/users/widgets.rb:2253 src/include/users/widgets.rb:2284 msgid "Reading sets of users and groups. Please wait..." msgstr "사용자와 그룹 설정을 읽는 중입니다. 기다려주십시오..." -#. helper function to get information about authentication from -#. appropriate module -#. @param [String] client -#. @return -#: src/include/users/widgets.rb:2331 +#. helper function to get information about authentication from +#. appropriate module +#. @param [String] client +#. @return +#: src/include/users/widgets.rb:2331 msgid "<b>yast2-auth-client module not installed</b>" msgstr "<b>yast2-auth-client 모듈이 설치되어 있지 않음</b>" -#. error popup, %1 is package name -#: src/include/users/widgets.rb:2435 +#. error popup, %1 is package name +#: src/include/users/widgets.rb:2435 msgid "Package %1 is not available for installation." msgstr "%1 패키지는 설치할 수 없습니다." -#. popup label (%1 is package to install) -#: src/include/users/widgets.rb:2450 +#. popup label (%1 is package to install) +#: src/include/users/widgets.rb:2450 msgid "" "Package %1 is not installed.\n" "Install it now?\n" @@ -3238,31 +3012,31 @@ "'%1'패키지가 시스템에 설치되어 있지 않습니다.\n" "지금 설치하시겠습니까?\n" -#. dialog caption -#: src/include/users/wizards.rb:102 +#. dialog caption +#: src/include/users/wizards.rb:102 msgid "User and Group Administration" msgstr "사용자 및 그룹 관리" -#. init dialog caption -#. dialog caption -#: src/include/users/wizards.rb:261 src/include/users/wizards.rb:284 +#. init dialog caption +#. dialog caption +#: src/include/users/wizards.rb:261 src/include/users/wizards.rb:284 msgid "User and Group Configuration" msgstr "사용자 및 그룹 관리" -#. label (during init dialog) -#. label (during init dialog) -#: src/include/users/wizards.rb:263 src/include/users/wizards.rb:287 +#. label (during init dialog) +#. label (during init dialog) +#: src/include/users/wizards.rb:263 src/include/users/wizards.rb:287 msgid "Initializing..." msgstr "초기화하고 있습니다..." -#. List of errors found for a given password -#. -#. The errors are localized and ready to be displayed to the user -#. -#. @param passwd [String] password to check -#. @return [Array<String>] errors or empty array if no errors are found or -#. validation is disabled -#: src/lib/users/ca_password_validator.rb:56 +#. List of errors found for a given password +#. +#. The errors are localized and ready to be displayed to the user +#. +#. @param passwd [String] password to check +#. @return [Array<String>] errors or empty array if no errors are found or +#. validation is disabled +#: src/lib/users/ca_password_validator.rb:56 msgid "" "If you intend to create certificates,\n" "the password should have at least %s characters." @@ -3270,10 +3044,10 @@ "인증서를 생성하려면\n" "비밀번호가 %s자 이상이어야 합니다." -#. Localized help text about CA constraints -#. -#. @return [String] html text or empty string if validation is disabled -#: src/lib/users/ca_password_validator.rb:69 +#. Localized help text about CA constraints +#. +#. @return [String] html text or empty string if validation is disabled +#: src/lib/users/ca_password_validator.rb:69 msgid "" "<p>If you intend to use this password for creating certificates,\n" "it has to be at least %s characters long.</p>" @@ -3281,51 +3055,47 @@ "<p>이 비밀번호를 인증서 생성에 사용하려는 경우\n" "%s자 이상이어야 합니다.</p>" -#. @see Implements ::Installation::FinishClient#title -#: src/lib/users/clients/users_finish.rb:55 +#. @see Implements ::Installation::FinishClient#title +#: src/lib/users/clients/users_finish.rb:55 msgid "Writing Users Configuration..." msgstr "사용자 구성 쓰는 중..." -#. Copyright (c) 2016 SUSE LLC. -#. All Rights Reserved. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 or 3 of the GNU General -#. Public License as published by the Free Software Foundation. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact SUSE LLC. -#. To contact SUSE about this file by physical or electronic mail, -#. you may find current contact information at www.suse.com -#: src/lib/users/dialogs/encryption_method.rb:39 +#. Copyright (c) 2016 SUSE LLC. +#. All Rights Reserved. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 or 3 of the GNU General +#. Public License as published by the Free Software Foundation. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact SUSE LLC. +#. To contact SUSE about this file by physical or electronic mail, +#. you may find current contact information at www.suse.com +#: src/lib/users/dialogs/encryption_method.rb:39 msgid "<p>Choose a password encryption method for local and system users.</p>" msgstr "<p>로컬 및 시스템 사용자에 대한 비밀번호 암호화 방법을 선택합니다.</p>" -#. TRANSLATORS: %s is the name of the recommended encryption method -#: src/lib/users/dialogs/encryption_method.rb:41 -msgid "" -"<p><b>%s</b> is the current standard hash method. Using other algorithms is " -"not recommended unless needed for compatibility purposes.</p>" -msgstr "" -"<p><b>%s</b>은(는) 현재 표준 해시 방법입니다. 호환성 목적을 위해 필요한 경우" -"가 아니면 다른 알고리즘을 사용하지 않는 것이 좋습니다.</p>" +#. TRANSLATORS: %s is the name of the recommended encryption method +#: src/lib/users/dialogs/encryption_method.rb:41 +msgid "<p><b>%s</b> is the current standard hash method. Using other algorithms is not recommended unless needed for compatibility purposes.</p>" +msgstr "<p><b>%s</b>은(는) 현재 표준 해시 방법입니다. 호환성 목적을 위해 필요한 경우가 아니면 다른 알고리즘을 사용하지 않는 것이 좋습니다.</p>" -#. Let's add some vertical space after each widget -#. TRANSLATORS: rich text label -#: src/lib/users/dialogs/encryption_method.rb:72 -#: src/lib/users/encryption_proposal.rb:63 +#. Let's add some vertical space after each widget +#. TRANSLATORS: rich text label +#: src/lib/users/dialogs/encryption_method.rb:72 +#: src/lib/users/encryption_proposal.rb:63 msgid "Password Encryption Type" msgstr "비밀번호 암호화 형식" -#. Title for root-password dialogue -#: src/lib/users/dialogs/inst_root_first.rb:58 +#. Title for root-password dialogue +#: src/lib/users/dialogs/inst_root_first.rb:58 msgid "Password for the System Administrator \"root\"" msgstr "시스템 관리자 \"root\"에 대한 비밀번호" -#. reenable suggestion -#: src/lib/users/dialogs/inst_user_first.rb:138 +#. reenable suggestion +#: src/lib/users/dialogs/inst_user_first.rb:138 msgid "" "<p>\n" "Use one of the available options to add local users to the system.\n" @@ -3337,11 +3107,11 @@ "로컬 사용자는 <i>/etc/passwd</i> 및 <i>/etc/shadow</i>에 저장됩니다.\n" "</p>\n" -#: src/lib/users/dialogs/inst_user_first.rb:142 +#: src/lib/users/dialogs/inst_user_first.rb:142 msgid "Create new user" msgstr "새 사용자 생성" -#: src/lib/users/dialogs/inst_user_first.rb:146 +#: src/lib/users/dialogs/inst_user_first.rb:146 msgid "" "<p>\n" "When entering a password, distinguish between uppercase and\n" @@ -3353,8 +3123,8 @@ "액센트 문자 또는 움라우트와 같은 특수 문자를 사용할 수 없습니다.\n" "</p>\n" -#. TRANSLATORS: %{min} and %{max} will be replaced by numbers -#: src/lib/users/dialogs/inst_user_first.rb:153 +#. TRANSLATORS: %{min} and %{max} will be replaced by numbers +#: src/lib/users/dialogs/inst_user_first.rb:153 msgid "" "<p>\n" "The password length should be between %{min}\n" @@ -3366,69 +3136,55 @@ "자에서 %{max}자 사이여야 합니다.\n" "</p>\n" -#: src/lib/users/dialogs/inst_user_first.rb:169 +#: src/lib/users/dialogs/inst_user_first.rb:169 msgid "" "<p>\n" -"For the <b>Username</b> use only letters (no accented characters), digits, " -"and <tt>._-</tt>.\n" -"Do not use uppercase letters in this entry unless you know what you are " -"doing.\n" +"For the <b>Username</b> use only letters (no accented characters), digits, and <tt>._-</tt>.\n" +"Do not use uppercase letters in this entry unless you know what you are doing.\n" "Usernames have stricter restrictions than passwords. You can redefine the\n" -"restrictions in the /etc/login.defs file. Read its man page for " -"information.\n" +"restrictions in the /etc/login.defs file. Read its man page for information.\n" "</p>\n" msgstr "" "<p>\n" -"<b>사용자 이름</b>에는 문자(액센트 문자 제외), 숫자 및 <tt>._-</tt>만 사용하" -"십시오.\n" +"<b>사용자 이름</b>에는 문자(액센트 문자 제외), 숫자 및 <tt>._-</tt>만 사용하십시오.\n" "의도적인 것이 아니라면 이 항목에 대문자를 사용하지 마십시오.\n" -"사용자 이름에는 비밀번호보다 더 엄격한 제한 사항이 있습니다. /etc/login." -"defs\n" -"파일에서 제한 사항을 다시 정의할 수 있습니다. 자세한 내용은 맨 페이지를 참조" -"하십시오.\n" +"사용자 이름에는 비밀번호보다 더 엄격한 제한 사항이 있습니다. /etc/login.defs\n" +"파일에서 제한 사항을 다시 정의할 수 있습니다. 자세한 내용은 맨 페이지를 참조하십시오.\n" "</p>\n" -#: src/lib/users/dialogs/inst_user_first.rb:176 -msgid "" -"<p>Check <b>Use this password for system administrator</b> if the same " -"password as entered for the first user should be used for root.</p>" -msgstr "" -"<p>처음 사용자의 비밀번호를 루트 비밀번호로 사용하려면 <b>이 비밀번호를 시스" -"템 관리자 비밀번호로 사용</b>을 선택하십시오.</p>" +#: src/lib/users/dialogs/inst_user_first.rb:176 +msgid "<p>Check <b>Use this password for system administrator</b> if the same password as entered for the first user should be used for root.</p>" +msgstr "<p>처음 사용자의 비밀번호를 루트 비밀번호로 사용하려면 <b>이 비밀번호를 시스템 관리자 비밀번호로 사용</b>을 선택하십시오.</p>" -#: src/lib/users/dialogs/inst_user_first.rb:187 +#: src/lib/users/dialogs/inst_user_first.rb:187 msgid "Import User Data from a Previous Installation" msgstr "이전 설치로부터 사용자 데이터 임포트" -#: src/lib/users/dialogs/inst_user_first.rb:188 +#: src/lib/users/dialogs/inst_user_first.rb:188 msgid "" "<p>\n" "A previous Linux installation with local users has been detected.\n" -"The information there can be used to create users in the system being " -"installed.\n" -"Use the <b>Choose Users</b> button to select some users. Their basic " -"information will\n" +"The information there can be used to create users in the system being installed.\n" +"Use the <b>Choose Users</b> button to select some users. Their basic information will\n" "be imported.\n" "</p>\n" msgstr "" "<p>\n" "로컬 사용자가 있는 이전 Linux 설치가 검색되었습니다.\n" "이 설치의 정보를 사용하여 설치하는 시스템에서 사용자를 생성할 수 있습니다.\n" -"<b>사용자 선택</b> 버튼을 사용하여 사용자를 선택하십시오. 사용자의 기본 정보" -"를\n" +"<b>사용자 선택</b> 버튼을 사용하여 사용자를 선택하십시오. 사용자의 기본 정보를\n" "임포트합니다.\n" "</p>\n" -#: src/lib/users/dialogs/inst_user_first.rb:196 +#: src/lib/users/dialogs/inst_user_first.rb:196 msgid "Skip User Creation" msgstr "사용자 생성 건너뛰기" -#: src/lib/users/dialogs/inst_user_first.rb:197 +#: src/lib/users/dialogs/inst_user_first.rb:197 msgid "" "<p>\n" "Sometimes root is the only needed local user, like in network environments\n" -"with an authentication server. Select this option to proceed without " -"creating\n" +"with an authentication server. Select this option to proceed without creating\n" "a local user.\n" "</p>\n" msgstr "" @@ -3438,12 +3194,12 @@ "선택하십시오.\n" "</p>\n" -#: src/lib/users/dialogs/inst_user_first.rb:279 +#: src/lib/users/dialogs/inst_user_first.rb:279 msgid "Local User" msgstr "로컬 사용자" -#. TRANSLATORS: Error popup -#: src/lib/users/dialogs/inst_user_first.rb:332 +#. TRANSLATORS: Error popup +#: src/lib/users/dialogs/inst_user_first.rb:332 msgid "" "The new username cannot be blank.\n" "If you don't want to create a user now, select\n" @@ -3453,8 +3209,8 @@ "지금 새 사용자를 생성하지 않으려면\n" "'사용자 생성 건너뛰기'를 선택하십시오." -#. TRANSLATORS: error popup -#: src/lib/users/dialogs/inst_user_first.rb:389 +#. TRANSLATORS: error popup +#: src/lib/users/dialogs/inst_user_first.rb:389 msgid "" "No users from the previous installation were choosen.\n" "If you don't want to create a user now, select\n" @@ -3464,141 +3220,141 @@ "지금 사용자를 생성하지 않으려면\n" "'사용자 생성 건너뛰기'를 선택하십시오." -#. TRANSLATORS: radio button -#: src/lib/users/dialogs/inst_user_first.rb:516 +#. TRANSLATORS: radio button +#: src/lib/users/dialogs/inst_user_first.rb:516 msgid "&Create New User" msgstr "새 사용자 생성(&C)" -#. TRANSLATORS: radio button -#: src/lib/users/dialogs/inst_user_first.rb:539 +#. TRANSLATORS: radio button +#: src/lib/users/dialogs/inst_user_first.rb:539 msgid "&Import User Data from a Previous Installation" msgstr "이전 설치로부터 사용자 데이터 임포트(&I)" -#: src/lib/users/dialogs/inst_user_first.rb:549 +#: src/lib/users/dialogs/inst_user_first.rb:549 msgid "Choose Users" msgstr "사용자 선택" -#. TRANSLATORS: radio button -#: src/lib/users/dialogs/inst_user_first.rb:565 +#. TRANSLATORS: radio button +#: src/lib/users/dialogs/inst_user_first.rb:565 msgid "&Skip User Creation" msgstr "사용자 생성 건너뛰기(&S)" -#. checkbox label -#: src/lib/users/dialogs/inst_user_first.rb:621 +#. checkbox label +#: src/lib/users/dialogs/inst_user_first.rb:621 msgid "&Automatic Login" msgstr "자동 로그인(&A)" -#: src/lib/users/dialogs/inst_user_first.rb:628 +#: src/lib/users/dialogs/inst_user_first.rb:628 msgid "No users selected" msgstr "선택한 사용자 없음" -#: src/lib/users/dialogs/inst_user_first.rb:630 +#: src/lib/users/dialogs/inst_user_first.rb:630 msgid "%d user will be imported" msgid_plural "%d users will be imported" msgstr[0] "사용자 %d을(를) 임포트합니다." -#. selection box label -#: src/lib/users/dialogs/users_to_import.rb:58 +#. selection box label +#: src/lib/users/dialogs/users_to_import.rb:58 msgid "&Select Users to Read" msgstr "읽을 사용자 선택(&S)" -#. check box label -#: src/lib/users/dialogs/users_to_import.rb:66 +#. check box label +#: src/lib/users/dialogs/users_to_import.rb:66 msgid "Select or Deselect &All" msgstr "모두 선택 또는 선택 취소(&A)" -#. TRANSLATORS: encryption type -#: src/lib/users/encryption_method.rb:55 +#. TRANSLATORS: encryption type +#: src/lib/users/encryption_method.rb:55 msgid "SHA-256" msgstr "SHA-256" -#. TRANSLATORS: encryption type -#: src/lib/users/encryption_method.rb:57 +#. TRANSLATORS: encryption type +#: src/lib/users/encryption_method.rb:57 msgid "SHA-512" msgstr "SHA-512" -#. TRANSLATORS: summary line. Second %s is the name of the method -#: src/lib/users/encryption_proposal.rb:35 +#. TRANSLATORS: summary line. Second %s is the name of the method +#: src/lib/users/encryption_proposal.rb:35 msgid "Encryption Method: <a href=%s>%s</a>" msgstr "암호화 방법: <a href=%s>%s</a>" -#. TRANSLATORS: menu button label -#. menu button label -#: src/lib/users/encryption_proposal.rb:66 src/lib/users/proposal.rb:82 +#. TRANSLATORS: menu button label +#. menu button label +#: src/lib/users/encryption_proposal.rb:66 src/lib/users/proposal.rb:82 msgid "Password &Encryption Type" msgstr "비밀번호 암호화 형식(&E)" -#. rich text label -#: src/lib/users/proposal.rb:75 +#. rich text label +#: src/lib/users/proposal.rb:75 msgid "User Settings" msgstr "사용자 설정" -#. menu button label -#: src/lib/users/proposal.rb:78 +#. menu button label +#: src/lib/users/proposal.rb:78 msgid "&User" msgstr "사용자(&U)" -#. menu button label -#: src/lib/users/proposal.rb:80 +#. menu button label +#: src/lib/users/proposal.rb:80 msgid "&Root Password" msgstr "루트 비밀번호(&R)" -#. TRANSLATORS: summary label <%1>-<%2> are HTML tags, leave untouched -#: src/lib/users/proposal.rb:92 +#. TRANSLATORS: summary label <%1>-<%2> are HTML tags, leave untouched +#: src/lib/users/proposal.rb:92 msgid "<%1>Root Password<%2> set" msgstr "<%1>루트 비밀번호<%2>가 설정되어 있음" -#. TRANSLATORS: summary label <%1>-<%2> are HTML tags, leave untouched -#: src/lib/users/proposal.rb:95 +#. TRANSLATORS: summary label <%1>-<%2> are HTML tags, leave untouched +#: src/lib/users/proposal.rb:95 msgid "<%1>Root Password<%2> not set" msgstr "<%1>루트 비밀번호<%2>가 설정되어 있지 않음" -#. summary label <%1>-<%2> are HTML tags, leave untouched -#: src/lib/users/proposal.rb:104 +#. summary label <%1>-<%2> are HTML tags, leave untouched +#: src/lib/users/proposal.rb:104 msgid "No <%1>user<%2> configured" msgstr "<%1>사용자<%2>가 구성되어 있지 않음" -#. TRANSLATORS: summary line, %d is the number of users -#: src/lib/users/proposal.rb:110 +#. TRANSLATORS: summary line, %d is the number of users +#: src/lib/users/proposal.rb:110 msgid "<a href=%s>%d user</a> will be imported" msgid_plural "<a href=%s>%d users</a> will be imported" msgstr[0] "<a href=%s>사용자 %d</a>을(를) 임포트합니다." -#. TRANSLATORS: summary line: <%1>-<%2> are HTML tags, leave untouched, -#. %3 is login name -#: src/lib/users/proposal.rb:118 +#. TRANSLATORS: summary line: <%1>-<%2> are HTML tags, leave untouched, +#. %3 is login name +#: src/lib/users/proposal.rb:118 msgid "<%1>User<%2> %3 configured" msgstr "<%1>사용자<%2> %3이(가) 구성됨" -#. summary line: <%1>-<%2> are HTML tags, leave untouched, -#. %3 is full name, %4 login name -#: src/lib/users/proposal.rb:127 +#. summary line: <%1>-<%2> are HTML tags, leave untouched, +#. %3 is full name, %4 login name +#: src/lib/users/proposal.rb:127 msgid "<%1>User<%2> %3 (%4) configured" msgstr "<%1>사용자<%2> %3 (%4)이(가) 구성됨" -#. TRANSLATORS: summary line. Second %s is the name of the method -#: src/lib/users/proposal.rb:141 +#. TRANSLATORS: summary line. Second %s is the name of the method +#: src/lib/users/proposal.rb:141 msgid "Password Encryption Method: <a href=%s>%s</a>" msgstr "비밀번호 암호화 방법: <a href=%s>%s</a>" -#. Label: get password for user root -#: src/lib/users/widgets.rb:59 +#. Label: get password for user root +#: src/lib/users/widgets.rb:59 msgid "&Password for root User" msgstr "루트 사용자에 대한 비밀번호(&P)" -#. Label: get same password again for verification -#: src/lib/users/widgets.rb:65 +#. Label: get same password again for verification +#: src/lib/users/widgets.rb:65 msgid "Con&firm Password" msgstr "비밀번호 확인(&F)" -#. advise users to remember their new password -#: src/lib/users/widgets.rb:77 +#. advise users to remember their new password +#: src/lib/users/widgets.rb:77 msgid "Do not forget what you enter here." msgstr "이곳에 입력한 비밀번호를 잊어버리지 않도록 주의하십시오." -#. #-#-#-#-# users.xgettext.pot #-#-#-#-# -#. error popup -#: src/lib/users/widgets.rb:108 src/modules/UsersSimple.pm:623 +#. #-#-#-#-# users.xgettext.pot #-#-#-#-# +#. error popup +#: src/lib/users/widgets.rb:108 src/modules/UsersSimple.pm:623 msgid "" "No password entered.\n" "Try again." @@ -3606,8 +3362,8 @@ "비밀번호를 입력하지 않았습니다.\n" "다시 시도하십시오." -#. help text ( explain what the user "root" is and does ) 1 -#: src/lib/users/widgets.rb:143 +#. help text ( explain what the user "root" is and does ) 1 +#: src/lib/users/widgets.rb:143 msgid "" "<p>\n" "Unlike normal users of the system, who write texts, create\n" @@ -3625,13 +3381,12 @@ " 수행해야 할 경우에는 루트로만 로그인하십시오.\n" " </p>\n" -#. help text, continued 2 -#: src/lib/users/widgets.rb:154 +#. help text, continued 2 +#: src/lib/users/widgets.rb:154 msgid "" "<p>\n" "Because the root user is equipped with extensive permissions, the password\n" -"for \"root\" should be chosen carefully. A combination of letters and " -"numbers\n" +"for \"root\" should be chosen carefully. A combination of letters and numbers\n" "is recommended. To ensure that the password was entered correctly,\n" "reenter it in a second field.\n" "</p>\n" @@ -3643,25 +3398,23 @@ "두번째 필드에 재입력을 합니다.\n" "</p>\n" -#. help text, continued 3 -#: src/lib/users/widgets.rb:164 +#. help text, continued 3 +#: src/lib/users/widgets.rb:164 msgid "" "<p>\n" "All the rules for user passwords apply to the \"root\" password:\n" "Distinguish between uppercase and lowercase. A password should have at\n" -"least 5 characters and, as a rule, not contain any accented letters or " -"umlauts.\n" +"least 5 characters and, as a rule, not contain any accented letters or umlauts.\n" "</p>\n" msgstr "" "<p>\n" "사용자 비밀번호에 대한 모든 규칙은 \"루트\" 비밀번호에 적용됩니다.\n" "비밀번호는 기본적으로 대소문자를 구분합니다. 최소 5자 이상이어야\n" -"하며, 일반적으로 액센트 문자 또는 움라우트와 같은 특수 문자를 사용할 수 없습" -"니다.\n" +"하며, 일반적으로 액센트 문자 또는 움라우트와 같은 특수 문자를 사용할 수 없습니다.\n" "</p>\n" -#. help text, continued 4 -#: src/lib/users/widgets.rb:175 +#. help text, continued 4 +#: src/lib/users/widgets.rb:175 msgid "" "<p>\n" "Do not forget this \"root\" password.\n" @@ -3671,369 +3424,369 @@ "이 \"root\" 비밀번호를 잊어버리지 마십시오.\n" " </p>" -#. User name for user: "root" -#: src/modules/UsersUI.rb:44 +#. User name for user: "root" +#: src/modules/UsersUI.rb:44 msgid "root" msgstr "root" -#. User name for user: "bin" -#: src/modules/UsersUI.rb:48 +#. User name for user: "bin" +#: src/modules/UsersUI.rb:48 msgid "bin" msgstr "bin" -#. User name for user: "daemon" -#: src/modules/UsersUI.rb:52 +#. User name for user: "daemon" +#: src/modules/UsersUI.rb:52 msgid "Daemon" msgstr "데몬" -#. User name for user: "lp" -#: src/modules/UsersUI.rb:56 +#. User name for user: "lp" +#: src/modules/UsersUI.rb:56 msgid "Printing Daemon" msgstr "프린팅 데몬" -#. User name for user: "mail" -#: src/modules/UsersUI.rb:60 +#. User name for user: "mail" +#: src/modules/UsersUI.rb:60 msgid "Mailer Daemon" msgstr "메일러 데몬" -#. User name for user: "news" -#: src/modules/UsersUI.rb:64 +#. User name for user: "news" +#: src/modules/UsersUI.rb:64 msgid "News System" msgstr "뉴스 시스템" -#. User name for user: "uucp" -#: src/modules/UsersUI.rb:68 +#. User name for user: "uucp" +#: src/modules/UsersUI.rb:68 msgid "Unix-to-Unix Copy System" msgstr "Unix 대 Unix 복사 시스템" -#. User name for user: "games" -#: src/modules/UsersUI.rb:72 +#. User name for user: "games" +#: src/modules/UsersUI.rb:72 msgid "Games Account" msgstr "게임 계정" -#. User name for user: "man" -#: src/modules/UsersUI.rb:76 +#. User name for user: "man" +#: src/modules/UsersUI.rb:76 msgid "Manual Page Viewer" msgstr "수동 페이지 뷰어" -#. User name for user: "at" -#: src/modules/UsersUI.rb:80 +#. User name for user: "at" +#: src/modules/UsersUI.rb:80 msgid "Batch Jobs Daemon" msgstr "연속 작업 데몬" -#. User name for user: "wwwrun" -#: src/modules/UsersUI.rb:84 +#. User name for user: "wwwrun" +#: src/modules/UsersUI.rb:84 msgid "WWW Daemon Apache" msgstr "WWW 데몬 Apache" -#. User name for user: "ftp" -#: src/modules/UsersUI.rb:88 +#. User name for user: "ftp" +#: src/modules/UsersUI.rb:88 msgid "FTP Account" msgstr "FTP 계정" -#. User name for user: "named" -#: src/modules/UsersUI.rb:92 +#. User name for user: "named" +#: src/modules/UsersUI.rb:92 msgid "Name Server Daemon" msgstr "이름 서버 데몬" -#. User name for user: "gdm" -#: src/modules/UsersUI.rb:96 +#. User name for user: "gdm" +#: src/modules/UsersUI.rb:96 msgid "GNOME Display Manager Daemon" msgstr "GNOME 디스플레이 관리자 데몬" -#. User name for user: "postfix" -#: src/modules/UsersUI.rb:100 +#. User name for user: "postfix" +#: src/modules/UsersUI.rb:100 msgid "Postfix Daemon" msgstr "Postfix 데몬" -#. User name for user: "sshd" -#: src/modules/UsersUI.rb:104 +#. User name for user: "sshd" +#: src/modules/UsersUI.rb:104 msgid "SSH Daemon" msgstr "SSH 데몬" -#. User name for user: "ntp" -#: src/modules/UsersUI.rb:108 +#. User name for user: "ntp" +#: src/modules/UsersUI.rb:108 msgid "NTP Daemon" msgstr "NTP 데몬" -#. User name for user: "ldap" -#: src/modules/UsersUI.rb:112 +#. User name for user: "ldap" +#: src/modules/UsersUI.rb:112 msgid "User for OpenLDAP" msgstr "OpenLDAP 사용자" -#. User name for user: "nobody" -#: src/modules/UsersUI.rb:116 +#. User name for user: "nobody" +#: src/modules/UsersUI.rb:116 msgid "Nobody" msgstr "익명사용자" -#. User name for user: "amanda" -#: src/modules/UsersUI.rb:120 +#. User name for user: "amanda" +#: src/modules/UsersUI.rb:120 msgid "Amanda Admin" msgstr "Amanda 관리" -#. User name for user: "vscan" -#: src/modules/UsersUI.rb:124 +#. User name for user: "vscan" +#: src/modules/UsersUI.rb:124 msgid "Vscan Account" msgstr "Vscan 계정" -#. User name for user: "bigsister" -#: src/modules/UsersUI.rb:128 +#. User name for user: "bigsister" +#: src/modules/UsersUI.rb:128 msgid "Big Sister" msgstr "Big Sister" -#. User name for user: "wnn" -#: src/modules/UsersUI.rb:132 +#. User name for user: "wnn" +#: src/modules/UsersUI.rb:132 msgid "Wnn System Account" msgstr "Wnn 시스템 계정" -#. User name for user: "cyrus" -#: src/modules/UsersUI.rb:136 +#. User name for user: "cyrus" +#: src/modules/UsersUI.rb:136 msgid "User for cyrus-imapd" msgstr "cyrys-imapd 사용자" -#. User name for user: "dpbox" -#: src/modules/UsersUI.rb:140 +#. User name for user: "dpbox" +#: src/modules/UsersUI.rb:140 msgid "DpBox Account" msgstr "DpBox 계정" -#. User name for user: "gnats" -#: src/modules/UsersUI.rb:144 +#. User name for user: "gnats" +#: src/modules/UsersUI.rb:144 msgid "GNATS GNU Backtracking System" msgstr "Gnats GNU 역추적 시스템" -#. User name for user: "gnump3d" -#: src/modules/UsersUI.rb:148 +#. User name for user: "gnump3d" +#: src/modules/UsersUI.rb:148 msgid "GNUMP3 Daemon" msgstr "GNUMP3 데몬" -#. User name for user: "hacluster" -#: src/modules/UsersUI.rb:152 +#. User name for user: "hacluster" +#: src/modules/UsersUI.rb:152 msgid "Heartbeat Processes" msgstr "하트비트 프로세스" -#. User name for user: "irc" -#: src/modules/UsersUI.rb:156 +#. User name for user: "irc" +#: src/modules/UsersUI.rb:156 msgid "IRC Daemon" msgstr "IRC 데몬" -#. User name for user: "mailman" -#: src/modules/UsersUI.rb:160 +#. User name for user: "mailman" +#: src/modules/UsersUI.rb:160 msgid "GNU Mailing List Manager" msgstr "GNU 주소록 관리자" -#. User name for user: "mdom" -#: src/modules/UsersUI.rb:164 +#. User name for user: "mdom" +#: src/modules/UsersUI.rb:164 msgid "Mailing List Agent" msgstr "주소록 에이전트" -#. User name for user: "mysql" -#: src/modules/UsersUI.rb:168 +#. User name for user: "mysql" +#: src/modules/UsersUI.rb:168 msgid "MySQL Database Admin" msgstr "MySQL 데이터베이스 관리" -#. User name for user: "oracle" -#: src/modules/UsersUI.rb:172 +#. User name for user: "oracle" +#: src/modules/UsersUI.rb:172 msgid "Oracle User" msgstr "Oracle 사용자" -#. User name for user: "postgres" -#: src/modules/UsersUI.rb:176 +#. User name for user: "postgres" +#: src/modules/UsersUI.rb:176 msgid "PostgreSQL Server" msgstr "PostgreSQL 서버" -#. User name for user: "pop" -#: src/modules/UsersUI.rb:180 +#. User name for user: "pop" +#: src/modules/UsersUI.rb:180 msgid "POP Admin" msgstr "POP 관리" -#. User name for user: "sapdb" -#: src/modules/UsersUI.rb:184 +#. User name for user: "sapdb" +#: src/modules/UsersUI.rb:184 msgid "SAPDB Account" msgstr "SAPDB 계정" -#. User name for user: "snort" -#: src/modules/UsersUI.rb:188 +#. User name for user: "snort" +#: src/modules/UsersUI.rb:188 msgid "Snort Network Monitor" msgstr "Snort 네트워크 모니터" -#. User name for user: "squid" -#: src/modules/UsersUI.rb:192 +#. User name for user: "squid" +#: src/modules/UsersUI.rb:192 msgid "WWW Proxy Squid" msgstr "WWW 프록시 스퀴드" -#. User name for user: "stunnel" -#: src/modules/UsersUI.rb:196 +#. User name for user: "stunnel" +#: src/modules/UsersUI.rb:196 msgid "Daemon User for stunnel (Universal SSL Tunnel)" msgstr "stunnel(Universal SSL Tunnel)에 대한 데몬 사용자" -#. User name for user: "zope" -#: src/modules/UsersUI.rb:200 +#. User name for user: "zope" +#: src/modules/UsersUI.rb:200 msgid "Zope" msgstr "Zope" -#. User name for user: "radiusd" -#: src/modules/UsersUI.rb:204 +#. User name for user: "radiusd" +#: src/modules/UsersUI.rb:204 msgid "Radius Daemon" msgstr "Radius 데몬" -#. User name for user: "otrs" -#: src/modules/UsersUI.rb:208 +#. User name for user: "otrs" +#: src/modules/UsersUI.rb:208 msgid "OTRS System User" msgstr "OTRS 시스템 사용자" -#. User name for user: "privoxy" -#: src/modules/UsersUI.rb:212 +#. User name for user: "privoxy" +#: src/modules/UsersUI.rb:212 msgid "Daemon User for privoxy" msgstr "privoxy 데몬 사용자" -#. User name for user: "vdr" -#: src/modules/UsersUI.rb:216 +#. User name for user: "vdr" +#: src/modules/UsersUI.rb:216 msgid "Video Disk Recorder" msgstr "비디오 디스크 레코더" -#. User name for user: "icecream" -#: src/modules/UsersUI.rb:220 +#. User name for user: "icecream" +#: src/modules/UsersUI.rb:220 msgid "Icecream Daemon" msgstr "Icecream 데몬" -#. User name for user: "bitlbee" -#: src/modules/UsersUI.rb:224 +#. User name for user: "bitlbee" +#: src/modules/UsersUI.rb:224 msgid "Bitlbee Daemon User" msgstr "Bitlbee 데몬 사용자" -#. User name for user: "dhcpd" -#: src/modules/UsersUI.rb:228 +#. User name for user: "dhcpd" +#: src/modules/UsersUI.rb:228 msgid "DHCP Server Daemon" msgstr "DHCP 서버 데몬" -#. User name for user: "distcc" -#: src/modules/UsersUI.rb:232 +#. User name for user: "distcc" +#: src/modules/UsersUI.rb:232 msgid "Distcc Daemon" msgstr "Distcc 데몬" -#. User name for user: "dovecot" -#: src/modules/UsersUI.rb:236 +#. User name for user: "dovecot" +#: src/modules/UsersUI.rb:236 msgid "Dovecot IMAP Daemon" msgstr "Dovecot IMAP 데몬" -#. User name for user: "fax" -#: src/modules/UsersUI.rb:240 +#. User name for user: "fax" +#: src/modules/UsersUI.rb:240 msgid "Facsimile Agent" msgstr "팩스 에이전트" -#. User name for user: "partimag" -#: src/modules/UsersUI.rb:244 +#. User name for user: "partimag" +#: src/modules/UsersUI.rb:244 msgid "Partimage Daemon User" msgstr "Partimage 데몬 사용자" -#. User name for user: "avahi" -#: src/modules/UsersUI.rb:248 +#. User name for user: "avahi" +#: src/modules/UsersUI.rb:248 msgid "User for Avahi" msgstr "Avahi용 사용자" -#. User name for user: "beagleindex" -#: src/modules/UsersUI.rb:252 +#. User name for user: "beagleindex" +#: src/modules/UsersUI.rb:252 msgid "User for Beagle indexing" msgstr "Beagle 인덱스용 사용자" -#. User name for user: "casaauth" -#: src/modules/UsersUI.rb:256 +#. User name for user: "casaauth" +#: src/modules/UsersUI.rb:256 msgid "casa_atvd System User" msgstr "casa_atvd 시스템 사용자" -#. User name for user: "dvbdaemon" -#: src/modules/UsersUI.rb:260 +#. User name for user: "dvbdaemon" +#: src/modules/UsersUI.rb:260 msgid "User for DVB daemon" msgstr "DVB 데몬용 사용자" -#. User name for user: "festival" -#: src/modules/UsersUI.rb:264 +#. User name for user: "festival" +#: src/modules/UsersUI.rb:264 msgid "Festival daemon" msgstr "Festival 데몬" -#. User name for user: "haldaemon" -#: src/modules/UsersUI.rb:268 +#. User name for user: "haldaemon" +#: src/modules/UsersUI.rb:268 msgid "User for haldaemon" msgstr "haldaemon용 사용자" -#. User name for user: "icecast" -#: src/modules/UsersUI.rb:272 +#. User name for user: "icecast" +#: src/modules/UsersUI.rb:272 msgid "Icecast streaming server" msgstr "Icecast 스트리밍 서버" -#. User name for user: "lighttpd" -#: src/modules/UsersUI.rb:276 +#. User name for user: "lighttpd" +#: src/modules/UsersUI.rb:276 msgid "User for lighttpd" msgstr "lighttpd의 사용자" -#. User name for user: "nagios" -#: src/modules/UsersUI.rb:280 +#. User name for user: "nagios" +#: src/modules/UsersUI.rb:280 msgid "User for Nagios" msgstr "Nagios용 사용자" -#. User name for user: "pdns" -#: src/modules/UsersUI.rb:284 +#. User name for user: "pdns" +#: src/modules/UsersUI.rb:284 msgid "User for PowerDNS" msgstr "PowerDNS용 사용자" -#. User name for user: "polkituser" -#: src/modules/UsersUI.rb:288 +#. User name for user: "polkituser" +#: src/modules/UsersUI.rb:288 msgid "PolicyKit" msgstr "PolicyKit" -#. User name for user: "pound" -#: src/modules/UsersUI.rb:292 +#. User name for user: "pound" +#: src/modules/UsersUI.rb:292 msgid "User for Pound" msgstr "Pound용 사용자" -#. User name for user: "pulse" -#: src/modules/UsersUI.rb:296 +#. User name for user: "pulse" +#: src/modules/UsersUI.rb:296 msgid "PulseAudio daemon" msgstr "PulseAudio 데몬" -#. User name for user: "quagga" -#: src/modules/UsersUI.rb:300 +#. User name for user: "quagga" +#: src/modules/UsersUI.rb:300 msgid "Quagga routing daemon" msgstr "Quagga 라우팅 데몬" -#. User name for user: "sabayon-admin" -#: src/modules/UsersUI.rb:304 +#. User name for user: "sabayon-admin" +#: src/modules/UsersUI.rb:304 msgid "Sabayon user" msgstr "Sabayon 사용자" -#. User name for user: "tomcat" -#: src/modules/UsersUI.rb:308 +#. User name for user: "tomcat" +#: src/modules/UsersUI.rb:308 msgid "Tomcat - Apache Servlet/JSP Engine" msgstr "Tomcat - Apache Servlet/JSP Engine" -#. User name for user: "tomcat" -#: src/modules/UsersUI.rb:312 +#. User name for user: "tomcat" +#: src/modules/UsersUI.rb:312 msgid "Apache Tomcat" msgstr "Apache Tomcat" -#. User name for user: "pegasus" -#. User name for user: "cimsrvr" -#: src/modules/UsersUI.rb:317 +#. User name for user: "pegasus" +#. User name for user: "cimsrvr" +#: src/modules/UsersUI.rb:317 msgid "tog-pegasus OpenPegasus WBEM/CIM services" msgstr "tog-pegasus OpenPegasus WBEM/CIM 서비스" -#. User name for user: "ulogd" -#: src/modules/UsersUI.rb:321 +#. User name for user: "ulogd" +#: src/modules/UsersUI.rb:321 msgid "ulog daemon" msgstr "ulog 데몬" -#. User name for user: "uuidd" -#: src/modules/UsersUI.rb:325 +#. User name for user: "uuidd" +#: src/modules/UsersUI.rb:325 msgid "User for uuidd" msgstr "uuidd용 사용자" -#. User name for user: "suse-ncc" -#: src/modules/UsersUI.rb:329 +#. User name for user: "suse-ncc" +#: src/modules/UsersUI.rb:329 msgid "Novell Customer Center User" msgstr "Novell 고객 센터 사용자" -#. label -#: src/modules/UsersUI.rb:343 +#. label +#: src/modules/UsersUI.rb:343 msgid "" "You have installed a NIS master server.\n" "It is configured to use a different database\n" @@ -4047,41 +3800,39 @@ " 구성되어 있습니다.\n" " 구성할 항목을 선택하십시오.\n" -#. radio button -#: src/modules/UsersUI.rb:359 +#. radio button +#: src/modules/UsersUI.rb:359 msgid "&Local (/etc directory)" msgstr "&로컬 (/etc 디렉토리)" -#. radio button, %1 is path (eg. /etc) -#: src/modules/UsersUI.rb:367 +#. radio button, %1 is path (eg. /etc) +#: src/modules/UsersUI.rb:367 msgid "&NIS (%1 directory)" msgstr "&NIS (%1 디렉토리)" -#. label above radiobutton box -#: src/modules/UsersUI.rb:425 +#. label above radiobutton box +#: src/modules/UsersUI.rb:425 msgid "User Templates" msgstr "사용자 템플릿" -#. label above radiobutton box -#: src/modules/UsersUI.rb:427 +#. label above radiobutton box +#: src/modules/UsersUI.rb:427 msgid "Group Templates" msgstr "그룹 템플릿" -#. label -#: src/modules/UsersUI.rb:452 +#. label +#: src/modules/UsersUI.rb:452 msgid "Multiple templates are defined as default. Select the one to read." -msgstr "" -"여러 개의 템플릿이 기본 템플릿으로 정의되었습니다. 읽을 템플릿을 선택하십시" -"오." +msgstr "여러 개의 템플릿이 기본 템플릿으로 정의되었습니다. 읽을 템플릿을 선택하십시오." -#. error message 2/2 (= next sentence) -#: src/modules/UsersUI.rb:491 +#. error message 2/2 (= next sentence) +#: src/modules/UsersUI.rb:491 msgid "Correct them manually before running the YaST users module again." msgstr "YaST 사용자 모듈을 다시 실행하기 전에 이를 수동으로 수정하십시오." -#. error message 1/2: %1 is file name, %2 is username, %3 is next sentence (2/2) -#. error message 1/2: %1 is file name, %2 is username, %3 is next sentence (2/2) -#: src/modules/UsersUI.rb:496 src/modules/UsersUI.rb:505 +#. error message 1/2: %1 is file name, %2 is username, %3 is next sentence (2/2) +#. error message 1/2: %1 is file name, %2 is username, %3 is next sentence (2/2) +#: src/modules/UsersUI.rb:496 src/modules/UsersUI.rb:505 msgid "" "There are multiple users with the same name (\"%2\") in the file %1.\n" "%3" @@ -4089,8 +3840,8 @@ "%1 파일에 같은 이름(\"%2\")의 사용자가 더 있습니다.\n" "%3" -#. error message 1/2: %1 is file name, %2 is groupname, %3 next sentence (2/2) -#: src/modules/UsersUI.rb:514 +#. error message 1/2: %1 is file name, %2 is groupname, %3 next sentence (2/2) +#: src/modules/UsersUI.rb:514 msgid "" "There are multiple groups with the same name (\"%2\") in the file %1.\n" "%3" @@ -4098,9 +3849,9 @@ "%1 파일에 같은 이름(\"%2\")의 그룹이 더 있습니다.\n" "%3" -#. error message 1/2: %1 is file name, %2 is line -#. error message 1/2: %1 is file name, %2 is line -#: src/modules/UsersUI.rb:523 src/modules/UsersUI.rb:534 +#. error message 1/2: %1 is file name, %2 is line +#. error message 1/2: %1 is file name, %2 is line +#: src/modules/UsersUI.rb:523 src/modules/UsersUI.rb:534 msgid "" "There is a strange line in the file %1:\n" "%2\n" @@ -4112,8 +3863,8 @@ "콜론 수가 잘못되었거나 일부 행 항목이 누락된 것 같습니다.\n" "YaST2 사용자 모듈을 다시 실행하기 전에 파일을 수동으로 수정하십시오." -#. error message 1/2: %1 is file name -#: src/modules/UsersUI.rb:545 +#. error message 1/2: %1 is file name +#: src/modules/UsersUI.rb:545 msgid "" "There is a strange line in the file %1.\n" "Perhaps the number of colons is wrong or some line entry is missing.\n" @@ -4123,14 +3874,14 @@ "콜론 수가 잘못되었거나 일부 행 항목이 누락된 것 같습니다.\n" "YaST2 사용자 모듈을 다시 실행하기 전에 파일을 수동으로 수정하십시오." -#. default error message -#: src/modules/UsersUI.rb:555 +#. default error message +#: src/modules/UsersUI.rb:555 msgid "Cannot read user or group data." msgstr "사용자 또는 그룹 데이터를 읽을 수 없습니다." -#. Popup text: %1 is the file name (e.g. /etc/fstab), -#. %2 is the directory (e.g. /home), -#: src/modules/Users.pm:725 +#. Popup text: %1 is the file name (e.g. /etc/fstab), +#. %2 is the directory (e.g. /home), +#: src/modules/Users.pm:725 msgid "" "In %1, there is a mount point for the directory\n" "%2, which is used as a default home directory for new\n" @@ -4148,186 +3899,186 @@ " 그럴 경우 정상적으로 마운트한 후에는 이러한 디렉토리에 액세스하지\n" " 못할 수도 있습니다. 사용자 구성을 계속하시겠습니까?" -#. error message -#: src/modules/Users.pm:973 +#. error message +#: src/modules/Users.pm:973 msgid "Multiple users satisfy the input conditions." msgstr "입력 조건에 해당하는 사용자가 여러 명입니다." -#. progress caption -#: src/modules/Users.pm:1551 +#. progress caption +#: src/modules/Users.pm:1551 msgid "Initializing User and Group Configuration" msgstr "사용자 및 그룹 구성 초기화" -#. progress stage label -#: src/modules/Users.pm:1558 +#. progress stage label +#: src/modules/Users.pm:1558 msgid "Read the default login settings" msgstr "기본 로그인 설정 읽기" -#. progress stage label -#: src/modules/Users.pm:1560 +#. progress stage label +#: src/modules/Users.pm:1560 msgid "Read the default system settings" msgstr "기본 시스템 설정 읽기" -#. progress stage label -#: src/modules/Users.pm:1562 +#. progress stage label +#: src/modules/Users.pm:1562 msgid "Read the configuration type" msgstr "설정방식 읽기" -#. progress stage label -#: src/modules/Users.pm:1564 +#. progress stage label +#: src/modules/Users.pm:1564 msgid "Read the user custom settings" msgstr "사용자 정의 설정 읽기" -#. progress stage label -#: src/modules/Users.pm:1566 +#. progress stage label +#: src/modules/Users.pm:1566 msgid "Read users and groups" msgstr "사용자 및 그룹 읽기" -#. progress stage label -#: src/modules/Users.pm:1568 +#. progress stage label +#: src/modules/Users.pm:1568 msgid "Build the cache structures" msgstr "캐쉬 구조를 만듬" -#. progress step label -#: src/modules/Users.pm:1572 +#. progress step label +#: src/modules/Users.pm:1572 msgid "Reading the default login settings..." msgstr "기본 로그인 설정을 읽는 중..." -#. progress step label -#: src/modules/Users.pm:1574 +#. progress step label +#: src/modules/Users.pm:1574 msgid "Reading the default system settings..." msgstr "기본 시스템 설정 읽는 중..." -#. progress step label -#: src/modules/Users.pm:1576 +#. progress step label +#: src/modules/Users.pm:1576 msgid "Reading the configuration type..." msgstr "기본 형태를 불러오는 중..." -#. progress step label -#: src/modules/Users.pm:1578 +#. progress step label +#: src/modules/Users.pm:1578 msgid "Reading custom settings..." msgstr "사용자 정의 설정을 읽는 중..." -#. progress step label -#: src/modules/Users.pm:1580 +#. progress step label +#: src/modules/Users.pm:1580 msgid "Reading users and groups..." msgstr "사용자와 그룹을 읽는 중..." -#. progress step label -#: src/modules/Users.pm:1582 +#. progress step label +#: src/modules/Users.pm:1582 msgid "Building the cache structures..." msgstr "캐시구조를 만드는 중..." -#. final progress step label -#: src/modules/Users.pm:1584 src/modules/Users.pm:4309 +#. final progress step label +#: src/modules/Users.pm:1584 src/modules/Users.pm:4309 msgid "Finished" msgstr "완료" -#. error message -#: src/modules/Users.pm:2140 +#. error message +#: src/modules/Users.pm:2140 msgid "User does not exist." msgstr "사용자가 존재하지 않습니다." -#. error message -#: src/modules/Users.pm:2392 +#. error message +#: src/modules/Users.pm:2392 msgid "Group does not exist." msgstr "그룹이 존재하지 않습니다." -#. progress caption -#: src/modules/Users.pm:4271 +#. progress caption +#: src/modules/Users.pm:4271 msgid "Writing User and Group Configuration" msgstr "사용자 및 그룹 구성 기록" -#. progress stage label -#: src/modules/Users.pm:4280 +#. progress stage label +#: src/modules/Users.pm:4280 msgid "Write LDAP users and groups" msgstr "LDAP 사용자와 그룹 설정을 기록" -#. progress stage label -#: src/modules/Users.pm:4282 +#. progress stage label +#: src/modules/Users.pm:4282 msgid "Write groups" msgstr "그룹을 기록" -#. progress stage label -#: src/modules/Users.pm:4284 +#. progress stage label +#: src/modules/Users.pm:4284 msgid "Check for deleted users" msgstr "삭제한 사용자를 점검" -#. progress stage label -#: src/modules/Users.pm:4286 +#. progress stage label +#: src/modules/Users.pm:4286 msgid "Write users" msgstr "사용자를 기록" -#. progress stage label -#: src/modules/Users.pm:4288 +#. progress stage label +#: src/modules/Users.pm:4288 msgid "Write passwords" msgstr "비밀번호를 기록" -#. progress stage label -#: src/modules/Users.pm:4290 +#. progress stage label +#: src/modules/Users.pm:4290 msgid "Write the custom settings" msgstr "사용자 설정을 기록" -#. progress stage label -#: src/modules/Users.pm:4292 +#. progress stage label +#: src/modules/Users.pm:4292 msgid "Write the default login settings" msgstr "기본 로그인 설정을 기록" -#. progress step label -#: src/modules/Users.pm:4295 +#. progress step label +#: src/modules/Users.pm:4295 msgid "Writing LDAP users and groups..." msgstr "LDAP 사용자와 그룹을 기록하는 중..." -#. progress step label -#: src/modules/Users.pm:4297 +#. progress step label +#: src/modules/Users.pm:4297 msgid "Writing groups..." msgstr "그룹을 기록하는 중..." -#. progress step label -#: src/modules/Users.pm:4299 +#. progress step label +#: src/modules/Users.pm:4299 msgid "Checking deleted users..." msgstr "지워진 사용자를 검사하는 중..." -#. progress step label -#: src/modules/Users.pm:4301 +#. progress step label +#: src/modules/Users.pm:4301 msgid "Writing users..." msgstr "사용자를 기록하는 중..." -#. progress step label -#: src/modules/Users.pm:4303 +#. progress step label +#: src/modules/Users.pm:4303 msgid "Writing passwords..." msgstr "비밀번호를 기록하는 중..." -#. progress step label -#: src/modules/Users.pm:4305 +#. progress step label +#: src/modules/Users.pm:4305 msgid "Writing the custom settings..." msgstr "사용자정의 설정을 기록하는 중..." -#. progress step label -#: src/modules/Users.pm:4307 +#. progress step label +#: src/modules/Users.pm:4307 msgid "Writing the default login settings..." msgstr "기본 로그인 설정을 기록하는 중..." -#. error popup (%s is a file name) -#: src/modules/Users.pm:4392 +#. error popup (%s is a file name) +#: src/modules/Users.pm:4392 #, perl-format msgid "File %s was not read correctly, so it will not be written." msgstr "%s 파일을 정확히 읽지 못했으므로 이 파일을 기록할 수 없습니다." -#. error popup -#: src/modules/Users.pm:4428 src/modules/Users.pm:4463 -#: src/modules/Users.pm:4744 +#. error popup +#: src/modules/Users.pm:4428 src/modules/Users.pm:4463 +#: src/modules/Users.pm:4744 msgid "An error occurred while removing users." msgstr "사용자를 제거하는 동안 오류가 발생했습니다." -#. error popup (%s is a file name) -#: src/modules/Users.pm:4441 src/modules/Users.pm:4594 +#. error popup (%s is a file name) +#: src/modules/Users.pm:4441 src/modules/Users.pm:4594 #, perl-format msgid "File %s was not correctly read, so it will not be written." msgstr "%s 파일을 정확히 읽지 못했으므로 이 파일을 기록할 수 없습니다." -#. error message -#: src/modules/Users.pm:4583 +#. error message +#: src/modules/Users.pm:4583 msgid "" "\n" "Encryption support is not installed, home directories will NOT be encrypted." @@ -4335,18 +4086,18 @@ "\n" "암호화 지원이 설치되어 있지 않습니다. 홈 디렉토리가 암호화되지 않습니다." -#. error popup -#: src/modules/Users.pm:4785 src/modules/YaPI/ADMINISTRATOR.pm:101 +#. error popup +#: src/modules/Users.pm:4785 src/modules/YaPI/ADMINISTRATOR.pm:101 msgid "An error occurred while setting forwarding for root's mail." msgstr "루트 메일에 대한 전달을 설정하는 동안 오류가 발생했습니다." -#. error popup -#: src/modules/Users.pm:4861 +#. error popup +#: src/modules/Users.pm:4861 msgid "No UID is available for this type of user." msgstr "이 유형의 사용자에 대해 사용할 수 있는 UID가 없습니다." -#. error popup -#: src/modules/Users.pm:4892 +#. error popup +#: src/modules/Users.pm:4892 #, perl-format msgid "" "The selected user ID is not allowed.\n" @@ -4355,8 +4106,8 @@ "선택한 사용자 ID를 사용할 수 없습니다.\n" "%i에서 %i 사이의 유효한 정수를 선택하십시오." -#. popup question -#: src/modules/Users.pm:4923 +#. popup question +#: src/modules/Users.pm:4923 msgid "" "The user ID entered is already in use.\n" "Really use it?" @@ -4364,8 +4115,8 @@ "입력한 사용자 ID는 이미 사용 중입니다.\n" "이것을 사용하시겠습니까?" -#. popup question, %i are numbers -#: src/modules/Users.pm:4936 +#. popup question, %i are numbers +#: src/modules/Users.pm:4936 #, perl-format msgid "" "The selected user ID is not from a range\n" @@ -4376,8 +4127,8 @@ "정의된 범위(%i-%i) 내에 있지 않습니다.\n" " 이것을 사용하시겠습니까?" -#. popup question -#: src/modules/Users.pm:4951 +#. popup question +#: src/modules/Users.pm:4951 #, perl-format msgid "" "The selected user ID is a local ID,\n" @@ -4388,8 +4139,8 @@ "크기 때문에 로컬 ID입니다.\n" " 사용자 유형을 '로컬'로 변경하시겠습니까?" -#. popup question -#: src/modules/Users.pm:4965 +#. popup question +#: src/modules/Users.pm:4965 #, perl-format msgid "" "The selected user ID is a system ID,\n" @@ -4400,7 +4151,7 @@ "작기 때문에 시스템 ID입니다.\n" " 사용자 유형을 '시스템'으로 변경하시겠습니까?" -#: src/modules/Users.pm:4999 +#: src/modules/Users.pm:4999 msgid "" "\n" "The existing username might belong to a NIS or LDAP user.\n" @@ -4408,8 +4159,8 @@ "\n" "기존 사용자 이름이 NIS 또는 LDAP 사용자에 속할 수 있습니다.\n" -#. error popup, %1 might be additional sentence ("The existing username...") -#: src/modules/Users.pm:5003 +#. error popup, %1 might be additional sentence ("The existing username...") +#: src/modules/Users.pm:5003 msgid "" "There is a conflict between the entered\n" "username and an existing username. %1\n" @@ -4419,8 +4170,8 @@ "충돌이 있습니다. %1\n" "다른 이름을 입력하십시오." -#. error popup -#: src/modules/Users.pm:5033 +#. error popup +#: src/modules/Users.pm:5033 msgid "" "The \"Additional User Information\" entry cannot\n" "contain a colon (:). Try again." @@ -4428,8 +4179,8 @@ "\"추가 사용자 정보\" 항목에는 콜론(:)을\n" "사용할 수 없습니다. 다시 시도하십시오." -#. error popup -#: src/modules/Users.pm:5040 +#. error popup +#: src/modules/Users.pm:5040 msgid "" "The \"Additional User Information\" entry can consist\n" "of up to three sections separated by commas.\n" @@ -4439,8 +4190,8 @@ "섹션을 세 개까지만 지정할 수 있습니다.\n" "나머지 섹션은 제거하십시오." -#. error popup -#: src/modules/Users.pm:5103 +#. error popup +#: src/modules/Users.pm:5103 msgid "" "The home directory may only contain the following characters:\n" "a-z, A-Z, 0-9, and _-/\n" @@ -4450,8 +4201,8 @@ "a-z, A-Z, 0-9 및 _-/.\n" " 다시 시도하십시오." -#. error popup -#: src/modules/Users.pm:5126 +#. error popup +#: src/modules/Users.pm:5126 #, perl-format msgid "" "The directory %s is not writable.\n" @@ -4460,8 +4211,8 @@ "%s 디렉토리에는 쓸 수 없습니다.\n" "다른 홈 디렉토리 경로를 선택하십시오." -#. error message -#: src/modules/Users.pm:5137 +#. error message +#: src/modules/Users.pm:5137 msgid "" "The home directory is used by another user.\n" "Try again." @@ -4469,8 +4220,8 @@ "홈 디렉토리를 다른 사용자가 사용하고 있습니다.\n" "다시 시도하십시오." -#. yes/no popup: user seleceted something strange as a home directory -#: src/modules/Users.pm:5179 +#. yes/no popup: user seleceted something strange as a home directory +#: src/modules/Users.pm:5179 msgid "" "The path for the selected home directory already exists,\n" "but it is not a directory.\n" @@ -4480,8 +4231,8 @@ "이것은 디렉토리가 아닙니다.\n" " 이 경로를 사용하시겠습니까?" -#. yes/no popup -#: src/modules/Users.pm:5190 +#. yes/no popup +#: src/modules/Users.pm:5190 msgid "" "The home directory selected already exists.\n" "Use it and change its owner?" @@ -4489,9 +4240,9 @@ "선택된 홈 디렉토리가 이미 존재합니다.\n" "그대로 사용하고 소유권를 변경하시겠습니까?" -#. chown is not needed (#25200) -#. yes/no popup -#: src/modules/Users.pm:5197 +#. chown is not needed (#25200) +#. yes/no popup +#: src/modules/Users.pm:5197 #, perl-format msgid "" "The selected home directory (%s)\n" @@ -4502,8 +4253,8 @@ "이미 있으며 현재 편집한 사용자가 소유하고 있습니다.\n" "이 디렉토리를 사용하시겠습니까?\n" -#. yes/no popup -#: src/modules/Users.pm:5206 +#. yes/no popup +#: src/modules/Users.pm:5206 #, perl-format msgid "" "The home directory selected (%s)\n" @@ -4516,8 +4267,8 @@ "지정되어 있습니다.\n" "이 디렉토리를 사용하시겠습니까?" -#. popup question -#: src/modules/Users.pm:5234 +#. popup question +#: src/modules/Users.pm:5234 msgid "" "If you select a nonexistent shell, the user may be unable to log in.\n" "Use this shell?" @@ -4525,13 +4276,13 @@ "존재하지 않는 쉘을 선택하면 사용자가 로그인하지 못할 수도 있습니다.\n" "이 쉘을 사용하시겠습니까?" -#. error popup -#: src/modules/Users.pm:5254 +#. error popup +#: src/modules/Users.pm:5254 msgid "No GID is available for this type of group." msgstr "이 유형의 그룹에 대해 사용할 수 있는 GID가 없습니다." -#. error popup -#: src/modules/Users.pm:5287 +#. error popup +#: src/modules/Users.pm:5287 #, perl-format msgid "" "The selected group ID is not allowed.\n" @@ -4540,8 +4291,8 @@ "선택한 그룹 ID는 사용할 수 없습니다.\n" "%i에서 %i 사이의 유효한 정수를 선택하십시오." -#. popup question -#: src/modules/Users.pm:5317 +#. popup question +#: src/modules/Users.pm:5317 msgid "" "The group ID entered is already in use.\n" "Really use it?" @@ -4549,8 +4300,8 @@ "입력한 그룹 ID는 이미 사용 중입니다.\n" "이것을 사용하시겠습니까?" -#. popup question, %i are numbers -#: src/modules/Users.pm:5329 +#. popup question, %i are numbers +#: src/modules/Users.pm:5329 #, perl-format msgid "" "The selected group ID is not from a range\n" @@ -4561,8 +4312,8 @@ "정의된 범위(%i-%i) 내에 있지 않습니다.\n" " 이것을 사용하시겠습니까?" -#. popup question -#: src/modules/Users.pm:5344 +#. popup question +#: src/modules/Users.pm:5344 #, perl-format msgid "" "The selected group ID is a local ID,\n" @@ -4573,8 +4324,8 @@ "크기 때문에 로컬 ID입니다.\n" " 그룹 유형을 '로컬'로 변경하시겠습니까?" -#. popup question -#: src/modules/Users.pm:5358 +#. popup question +#: src/modules/Users.pm:5358 #, perl-format msgid "" "The selected group ID is a system ID,\n" @@ -4585,8 +4336,8 @@ "작기 때문에 시스템 ID입니다.\n" " 그룹 유형을 '시스템'으로 변경하시겠습니까?" -#. error popup -#: src/modules/Users.pm:5377 +#. error popup +#: src/modules/Users.pm:5377 msgid "" "No group name entered.\n" "Try again." @@ -4594,8 +4345,8 @@ "그룹 이름을 입력하지 않았습니다.\n" "다시 시도하십시오." -#. error popup -#: src/modules/Users.pm:5394 +#. error popup +#: src/modules/Users.pm:5394 #, perl-format msgid "" "The group name must be between %i and %i characters in length.\n" @@ -4604,8 +4355,8 @@ "그룹 이름은 %i에서 %i자 사이로 지정해야 합니다.\n" "다시 시도하십시오." -#. error popup -#: src/modules/Users.pm:5407 +#. error popup +#: src/modules/Users.pm:5407 msgid "" "The group name may contain only\n" "letters, digits, \"-\", \".\", and \"_\"\n" @@ -4617,8 +4368,8 @@ "포함할 수 있습니다.\n" "다시 시도하십시오." -#. error popup -#: src/modules/Users.pm:5415 +#. error popup +#: src/modules/Users.pm:5415 msgid "" "There is a conflict between the entered\n" "group name and an existing group name.\n" @@ -4628,13 +4379,13 @@ "서로 충돌합니다.\n" "다른 이름을 사용하십시오." -#: src/modules/Users.pm:5531 +#: src/modules/Users.pm:5531 #, perl-format msgid "User %s does not exist." msgstr "사용자 %s이(가) 없습니다." -#. error message: group cannot be deleted -#: src/modules/Users.pm:5585 +#. error message: group cannot be deleted +#: src/modules/Users.pm:5585 msgid "" "You cannot delete this group because\n" "there are users that use this group\n" @@ -4644,8 +4395,8 @@ "사용자가 있으므로 이 그룹은\n" "삭제할 수 없습니다." -#. error message: group cannot be deleted -#: src/modules/Users.pm:5592 +#. error message: group cannot be deleted +#: src/modules/Users.pm:5592 msgid "" "You cannot delete this group because\n" "there are users in the group.\n" @@ -4655,33 +4406,33 @@ "이 그룹은 삭제할 수 없습니다.\n" "먼저 그룹에 속한 사용자를 삭제하십시오." -#. summary label -#: src/modules/Users.pm:6617 +#. summary label +#: src/modules/Users.pm:6617 msgid "<h3>Users</h3>" msgstr "<h3>사용자</h3>" -#. summary label -#: src/modules/Users.pm:6627 +#. summary label +#: src/modules/Users.pm:6627 msgid "<h3>Groups</h3>" msgstr "<h3>그룹</h3>" -#. summary label -#: src/modules/Users.pm:6638 +#. summary label +#: src/modules/Users.pm:6638 msgid "<h3>Login Settings</h3>" msgstr "<h3>로그인 설정</h3>" -#. summary item, %1 is user name -#: src/modules/Users.pm:6640 +#. summary item, %1 is user name +#: src/modules/Users.pm:6640 msgid "User %1 configured for automatic login" msgstr "자동 로그인에 대해 구성된 사용자 %1" -#. error message -#: src/modules/UsersLDAP.pm:226 +#. error message +#: src/modules/UsersLDAP.pm:226 msgid "No password for LDAP was entered." msgstr "LDAP 비밀번호를 입력하지 않았습니다." -#. popup question, %s is string argument -#: src/modules/UsersLDAP.pm:351 src/modules/UsersLDAP.pm:377 +#. popup question, %s is string argument +#: src/modules/UsersLDAP.pm:351 src/modules/UsersLDAP.pm:377 #, perl-format msgid "" "No entry with DN '%s'\n" @@ -4690,39 +4441,38 @@ "해당 LDAP 서버에는 DN이 '%s'인 \n" "엔트리가 없습니다. 지금 생성하시겠습니까?" -#. plugin name -#: src/modules/UsersPluginKerberos.pm:124 +#. plugin name +#: src/modules/UsersPluginKerberos.pm:124 msgid "Kerberos Configuration" msgstr "Kerberos 구성" -#. user plugin summary (table item) -#: src/modules/UsersPluginKerberos.pm:135 +#. user plugin summary (table item) +#: src/modules/UsersPluginKerberos.pm:135 msgid "No Kerberos Management for Groups" msgstr "그룹에 대한 Kerberos 관리 없음" -#. user plugin summary (table item) -#: src/modules/UsersPluginKerberos.pm:138 +#. user plugin summary (table item) +#: src/modules/UsersPluginKerberos.pm:138 msgid "Manage Kerberos Principials" msgstr "Kerberos 사용자 관리" -#: src/modules/UsersPluginKerberos.pm:262 +#: src/modules/UsersPluginKerberos.pm:262 msgid "Cannot execute kadmin.local." msgstr "kadmin.local을 실행할 수 없습니다." -#. plugin name -#: src/modules/UsersPluginLDAPAll.pm:147 +#. plugin name +#: src/modules/UsersPluginLDAPAll.pm:147 msgid "LDAP Attributes" msgstr "LDAP 특성" -#. plugin summary (table item) -#: src/modules/UsersPluginLDAPAll.pm:158 -#: src/modules/UsersPluginLDAPAll.pm:162 +#. plugin summary (table item) +#: src/modules/UsersPluginLDAPAll.pm:158 src/modules/UsersPluginLDAPAll.pm:162 msgid "Edit Remaining LDAP Attributes" msgstr "나머지 LDAP 속성 편집" -#. error popup (user forgot to fill in some attributes) -#: src/modules/UsersPluginLDAPAll.pm:280 -#: src/modules/UsersPluginLDAPShadowAccount.pm:287 +#. error popup (user forgot to fill in some attributes) +#: src/modules/UsersPluginLDAPAll.pm:280 +#: src/modules/UsersPluginLDAPShadowAccount.pm:287 #, perl-format msgid "" "The attribute '%s' is required for this object according\n" @@ -4731,28 +4481,28 @@ "LDAP 구성에 따라 '%s' 특성이 이 객체에 필요하지만\n" "현재 비어 있습니다." -#: src/modules/UsersPluginLDAPAll.pm:378 +#: src/modules/UsersPluginLDAPAll.pm:378 msgid "An error occurred." msgstr "오류가 발생했습니다." -#. plugin name -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:147 +#. plugin name +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:147 msgid "LDAP Password Policy" msgstr "LDAP 암호 정책" -#. user plugin summary (table item) -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:156 +#. user plugin summary (table item) +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:156 msgid "Edit Password Policy" msgstr "암호 정책 편집" -#. error popup, %s is object DN -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:239 +#. error popup, %s is object DN +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:239 #, perl-format msgid "Invalid DN syntax of \"%s\"." msgstr "\"%s\"의 DN 구문이 잘못되었습니다." -#. error popup, first %s is object DN, second is additional error message -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:251 +#. error popup, first %s is object DN, second is additional error message +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:251 #, perl-format msgid "" "Error while searching for \"%s\":\n" @@ -4761,8 +4511,8 @@ "\"%s\"을(를) 검색하는 중에 오류가 발생했습니다.\n" "%s" -#. error popup, %s is object DN -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:258 +#. error popup, %s is object DN +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:258 #, perl-format msgid "" "The object \"%s\"\n" @@ -4771,9 +4521,9 @@ "\"%s\" 개체가\n" "암호 정책 개체가 아닙니다." -#. error popup -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:308 -#: src/modules/UsersPluginLDAPPasswordPolicy.pm:349 +#. error popup +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:308 +#: src/modules/UsersPluginLDAPPasswordPolicy.pm:349 msgid "" "It is not possible to add this plug-in when\n" "the plugin for Shadow Account attributes is in use.\n" @@ -4781,19 +4531,19 @@ "계정 숨김 특성 플러그인이 사용 중인\n" "경우에는 이 플러그인을 추가할 수 없습니다.\n" -#. plugin name -#: src/modules/UsersPluginLDAPShadowAccount.pm:183 +#. plugin name +#: src/modules/UsersPluginLDAPShadowAccount.pm:183 msgid "Shadow Account Configuration" msgstr "섀도 계정 구성" -#. user plugin summary (table item) -#: src/modules/UsersPluginLDAPShadowAccount.pm:192 +#. user plugin summary (table item) +#: src/modules/UsersPluginLDAPShadowAccount.pm:192 msgid "Edit Shadow Account attributes" msgstr "섀도 계정 속성 편집" -#. error popup -#: src/modules/UsersPluginLDAPShadowAccount.pm:350 -#: src/modules/UsersPluginLDAPShadowAccount.pm:396 +#. error popup +#: src/modules/UsersPluginLDAPShadowAccount.pm:350 +#: src/modules/UsersPluginLDAPShadowAccount.pm:396 msgid "" "It is not possible to add this plug-in when\n" "the plug-in for Password Policy is in use.\n" @@ -4801,23 +4551,23 @@ "암호 정책의 플러그인을 사용 중인 경우\n" "해당 플러그인을 추가할 수 없습니다.\n" -#. plugin name -#: src/modules/UsersPluginQuota.pm:237 +#. plugin name +#: src/modules/UsersPluginQuota.pm:237 msgid "Quota Configuration" msgstr "할당량 구성" -#. user plugin summary (table item) -#: src/modules/UsersPluginQuota.pm:248 +#. user plugin summary (table item) +#: src/modules/UsersPluginQuota.pm:248 msgid "Manage Group Quota" msgstr "그룹 할당량 관리" -#. user plugin summary (table item) -#: src/modules/UsersPluginQuota.pm:251 +#. user plugin summary (table item) +#: src/modules/UsersPluginQuota.pm:251 msgid "Manage User Quota" msgstr "사용자 할당량 관리" -#. error popup -#: src/modules/UsersPluginQuota.pm:325 src/modules/UsersPluginQuota.pm:365 +#. error popup +#: src/modules/UsersPluginQuota.pm:325 src/modules/UsersPluginQuota.pm:365 msgid "" "Quota is not enabled on your system.\n" "Enable quota in the partition settings module." @@ -4825,8 +4575,8 @@ "시스템에 할당량이 활성화되어 있지 않습니다.\n" "파티션 설정 모듈에서 할당량을 활성화하십시오." -#. error popup, %1 is command, %2 command error output -#: src/modules/UsersPluginQuota.pm:424 src/modules/UsersPluginQuota.pm:435 +#. error popup, %1 is command, %2 command error output +#: src/modules/UsersPluginQuota.pm:424 src/modules/UsersPluginQuota.pm:435 msgid "" "Error while calling\n" "\"%1\":\n" @@ -4836,9 +4586,9 @@ "오류가 발생했습니다.\n" "%2" -#. the ']' is or-ed... -#. error popup -#: src/modules/UsersSimple.pm:379 +#. the ']' is or-ed... +#. error popup +#: src/modules/UsersSimple.pm:379 msgid "" "The password may only contain the following characters:\n" "0-9, a-z, A-Z, and any of \"`~!@#$%^&* ,.;:._-+/|?='{[(<>)]}\\\".\n" @@ -4848,12 +4598,11 @@ "0-9, a-z, A-Z 및 \"`~!@#$%^&* ,.;:._-+/|?='{[(<>)]}\\\".\n" "다시 시도하십시오." -#. help text (default part shown in more places) -#: src/modules/UsersSimple.pm:414 +#. help text (default part shown in more places) +#: src/modules/UsersSimple.pm:414 msgid "" "<p>\n" -"For the password, use only characters that can be found on an English " -"keyboard\n" +"For the password, use only characters that can be found on an English keyboard\n" "layout. In cases of system error, it may be necessary to log in without a\n" "localized keyboard layout.\n" "</p>" @@ -4864,8 +4613,8 @@ " 않고 로그인해야 합니다.\n" " </p>" -#. error popup -#: src/modules/UsersSimple.pm:494 +#. error popup +#: src/modules/UsersSimple.pm:494 msgid "" "The user's full name cannot contain\n" "\":\" or \",\" characters.\n" @@ -4875,38 +4624,38 @@ "문자를 포함할 수 없습니다.\n" " 다시 시도하십시오." -#. popup question -#: src/modules/UsersSimple.pm:521 +#. popup question +#: src/modules/UsersSimple.pm:521 msgid "You have used the group name as a part of the password." msgstr "그룹 이름을 비밀번호의 일부로 사용했습니다." -#. popup question -#: src/modules/UsersSimple.pm:524 +#. popup question +#: src/modules/UsersSimple.pm:524 msgid "You have used the username as a part of the password." msgstr "사용자 이름을 비밀번호의 일부로 사용했습니다." -#. popup question -#: src/modules/UsersSimple.pm:533 +#. popup question +#: src/modules/UsersSimple.pm:533 msgid "You have used only lowercase letters for the password." msgstr "비밀번호에 소문자만 사용했습니다." -#. popup question -#: src/modules/UsersSimple.pm:541 +#. popup question +#: src/modules/UsersSimple.pm:541 msgid "You have used only uppercase letters for the password." msgstr "비밀번호에 대문자만 사용했습니다." -#. popup question -#: src/modules/UsersSimple.pm:548 +#. popup question +#: src/modules/UsersSimple.pm:548 msgid "You have used a palindrome for the password." msgstr "비밀번호에 회문을 사용했습니다." -#. popup question -#: src/modules/UsersSimple.pm:556 +#. popup question +#: src/modules/UsersSimple.pm:556 msgid "You have used only digits for the password." msgstr "비밀번호에 숫자만 사용했습니다." -#. popup question -#: src/modules/UsersSimple.pm:578 +#. popup question +#: src/modules/UsersSimple.pm:578 #, perl-format msgid "" "The password is too long for the current encryption method.\n" @@ -4915,8 +4664,8 @@ "현재 암호화 방법으로 사용하기에 비밀번호가 너무 깁니다.\n" "%s자로 잘립니다." -#. error message -#: src/modules/UsersSimple.pm:665 +#. error message +#: src/modules/UsersSimple.pm:665 #, perl-format msgid "" "The password is too simple:\n" @@ -4925,14 +4674,14 @@ "비밀번호가 너무 단순합니다.\n" "%s" -#. popup error, %i is number -#: src/modules/UsersSimple.pm:679 +#. popup error, %i is number +#: src/modules/UsersSimple.pm:679 #, perl-format msgid "The password should have at least %i characters." msgstr "비밀번호는 %i자 이상이어야 합니다." -#. error popup -#: src/modules/UsersSimple.pm:700 +#. error popup +#: src/modules/UsersSimple.pm:700 msgid "" "No username entered.\n" "Try again." @@ -4940,8 +4689,8 @@ "사용자 이름을 입력하지 않았습니다.\n" "다시 시도하십시오." -#. error popup -#: src/modules/UsersSimple.pm:710 +#. error popup +#: src/modules/UsersSimple.pm:710 #, perl-format msgid "" "The username must be between %i and %i characters in length.\n" @@ -4950,8 +4699,8 @@ "사용자 이름의 길이는 %i에서 %i자 사이여야 합니다.\n" "다시 시도하십시오." -#. error popup -#: src/modules/UsersSimple.pm:739 +#. error popup +#: src/modules/UsersSimple.pm:739 msgid "" "The username may contain only\n" "letters, digits, \"-\", \".\", and \"_\"\n" @@ -4962,8 +4711,8 @@ " 문자 또는 \"_\"로 시작해야 합니다.\n" " 다시 시도하십시오." -#. error popup -#: src/modules/UsersSimple.pm:760 +#. error popup +#: src/modules/UsersSimple.pm:760 msgid "" "There is a conflict between the entered\n" "username and an existing username.\n" @@ -4973,18 +4722,18 @@ "충돌이 있습니다.\n" " 다른 이름을 입력해보십시오." -#. busy popup message -#: src/modules/UsersSimple.pm:982 +#. busy popup message +#: src/modules/UsersSimple.pm:982 msgid "Retrieving %1 extension..." msgstr "%1 확장 검색 중..." -#. busy popup message -#: src/modules/UsersSimple.pm:996 +#. busy popup message +#: src/modules/UsersSimple.pm:996 msgid "Releasing %1 extension..." msgstr "확장 %1 해제 중..." -#. error message -#: src/modules/YaPI/USERS.pm:533 +#. error message +#: src/modules/YaPI/USERS.pm:533 msgid "" "There is a conflict between the entered\n" "user name and an existing user name.\n" @@ -4994,8 +4743,8 @@ "이름이 서로 충돌합니다.\n" "다른 이름을 사용하십시오." -#. error message -#: src/modules/YaPI/USERS.pm:545 +#. error message +#: src/modules/YaPI/USERS.pm:545 msgid "" "The home directory is used from another user.\n" "Please try again." @@ -5003,45 +4752,45 @@ "홈 디렉토리가 다른 사용자로 부터 사용되고 있습니다.\n" "다시 시도하십시오." -#. error message -#: src/modules/YaPI/USERS.pm:741 src/modules/YaPI/USERS.pm:858 +#. error message +#: src/modules/YaPI/USERS.pm:741 src/modules/YaPI/USERS.pm:858 msgid "No plug-in was defined" msgstr "플러그인이 정의되어 있지 않았습니다." -#. error message -#: src/modules/YaPI/USERS.pm:795 src/modules/YaPI/USERS.pm:912 +#. error message +#: src/modules/YaPI/USERS.pm:795 src/modules/YaPI/USERS.pm:912 msgid "It is not possible to edit a NIS user." msgstr "NIS 사용자는 편집할 수 없습니다." -#. error message -#: src/modules/YaPI/USERS.pm:1025 +#. error message +#: src/modules/YaPI/USERS.pm:1025 msgid "It is not possible to delete a NIS user." msgstr "NIS 사용자는 삭제할 수 없습니다." -#. error message -#: src/modules/YaPI/USERS.pm:1684 src/modules/YaPI/USERS.pm:1817 -#: src/modules/YaPI/USERS.pm:1980 +#. error message +#: src/modules/YaPI/USERS.pm:1684 src/modules/YaPI/USERS.pm:1817 +#: src/modules/YaPI/USERS.pm:1980 msgid "It is not possible to modify a NIS group." msgstr "NIS 그룹은 수정할 수 없습니다." -#. error message -#: src/modules/YaPI/USERS.pm:1761 src/modules/YaPI/USERS.pm:1924 -#: src/modules/YaPI/USERS.pm:2403 +#. error message +#: src/modules/YaPI/USERS.pm:1761 src/modules/YaPI/USERS.pm:1924 +#: src/modules/YaPI/USERS.pm:2403 msgid "No user was specified." msgstr "사용자가 지정되어 있지 않습니다." -#. error message -#: src/modules/YaPI/USERS.pm:1858 src/modules/YaPI/USERS.pm:2021 -#: src/modules/YaPI/USERS.pm:2476 +#. error message +#: src/modules/YaPI/USERS.pm:1858 src/modules/YaPI/USERS.pm:2021 +#: src/modules/YaPI/USERS.pm:2476 msgid "User was not correctly specified." msgstr "사용자가 잘못 지정되어 있습니다." -#. error message -#: src/modules/YaPI/USERS.pm:2133 +#. error message +#: src/modules/YaPI/USERS.pm:2133 msgid "It is not possible to delete a NIS group." msgstr "NIS 그룹은 삭제할 수 없습니다." -#. error message -#: src/modules/YaPI/USERS.pm:2451 +#. error message +#: src/modules/YaPI/USERS.pm:2451 msgid "There are multiple users satisfying the input conditions." msgstr "입력한 조건을 만족하는 사용자가 둘 이상 있습니다." Modified: branches/SLE12-SP3/yast/ko/po/vm.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/vm.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/vm.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,28 +14,24 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Main -#. Definition of command line mode options -#: src/clients/virtualization.rb:54 +#. Main +#. Definition of command line mode options +#: src/clients/virtualization.rb:54 msgid "Install Hypervisor and Tools" msgstr "Hypervisor와 도구 설치" -#. progress step title -#: src/clients/vm_finish.rb:69 +#. progress step title +#: src/clients/vm_finish.rb:69 msgid "Configuring the virtual machine..." msgstr "가상 머신 구성 중..." -#. check for kernel-bigsmp -#: src/modules/VirtConfig.rb:160 -msgid "" -"x86_64 is the only supported architecture for hosting virtual machines. Your " -"architecture is " -msgstr "" -"x86_64는 가상 시스템 호스트에 대해 유일하게 지원되는 아키텍처입니다. 사용자" -"의 아키텍처 " +#. check for kernel-bigsmp +#: src/modules/VirtConfig.rb:160 +msgid "x86_64 is the only supported architecture for hosting virtual machines. Your architecture is " +msgstr "x86_64는 가상 시스템 호스트에 대해 유일하게 지원되는 아키텍처입니다. 사용자의 아키텍처 " -#. we are already in UML, nested virtual machine is not supported -#: src/modules/VirtConfig.rb:179 +#. we are already in UML, nested virtual machine is not supported +#: src/modules/VirtConfig.rb:179 msgid "" "Virtual machine installation cannot be started inside the UML machine.\n" "Start installation in the host system.\n" @@ -43,221 +39,189 @@ "UML 머신 내에서 가상 머신 설치를 시작할 수 없습니다.\n" "호스트 시스템에서 설치를 시작하십시오.\n" -#. progress stage 1/2 -#. Generate a pop dialog to allow user selection of Xen or KVM -#: src/modules/VirtConfig.rb:196 src/modules/VirtConfig.rb:285 +#. progress stage 1/2 +#. Generate a pop dialog to allow user selection of Xen or KVM +#: src/modules/VirtConfig.rb:196 src/modules/VirtConfig.rb:285 msgid "Verify Installed Packages" msgstr "설치된 패키지 확인" -#. progress stage 2/2 -#: src/modules/VirtConfig.rb:198 +#. progress stage 2/2 +#: src/modules/VirtConfig.rb:198 msgid "Network Bridge Configuration" msgstr "네트워크 브리지 구성" -#. Headline for management domain installation -#: src/modules/VirtConfig.rb:213 +#. Headline for management domain installation +#: src/modules/VirtConfig.rb:213 msgid "Configuring the VM Server (domain 0)" msgstr "VM 서버(도메인 0) 구성" -#. xen domain0 installation help text - 1/4 -#: src/modules/VirtConfig.rb:216 -msgid "" -"<p><big><b>VM Server Configuration</b></big></p><p>Configuration of the VM " -"Server (domain 0) has two parts.</p>" -msgstr "" -"<p><big><b>VM 서버 구성</b></big></p><p>VM 서버(도메인 0)의 구성에는 두 개 부" -"분이 있습니다.</p>" +#. xen domain0 installation help text - 1/4 +#: src/modules/VirtConfig.rb:216 +msgid "<p><big><b>VM Server Configuration</b></big></p><p>Configuration of the VM Server (domain 0) has two parts.</p>" +msgstr "<p><big><b>VM 서버 구성</b></big></p><p>VM 서버(도메인 0)의 구성에는 두 개 부분이 있습니다.</p>" -#. xen domain0 installation help text - 2/4 -#: src/modules/VirtConfig.rb:220 -msgid "" -"<p>The required packages are installed into the system first. Then the boot " -"loader is switched to GRUB (if not already used) and the Xen section is " -"added to the boot loader menu if it is missing.</p>" -msgstr "" -"<p>필요한 패키지가 먼저 시스템에 설치됩니다. 그런 다음 부트 로더가 GRUB로 전" -"환되고(아직 사용되지 않은 경우), Xen 섹션이 없는 경우 부트 로더 메뉴에 추가됩" -"니다.</p>" +#. xen domain0 installation help text - 2/4 +#: src/modules/VirtConfig.rb:220 +msgid "<p>The required packages are installed into the system first. Then the boot loader is switched to GRUB (if not already used) and the Xen section is added to the boot loader menu if it is missing.</p>" +msgstr "<p>필요한 패키지가 먼저 시스템에 설치됩니다. 그런 다음 부트 로더가 GRUB로 전환되고(아직 사용되지 않은 경우), Xen 섹션이 없는 경우 부트 로더 메뉴에 추가됩니다.</p>" -#. xen domain0 installation help text - 3/4 -#: src/modules/VirtConfig.rb:224 -msgid "" -"<p>GRUB is needed because it supports the multiboot standard required to " -"boot Xen and the Linux kernel.</p>" -msgstr "" -"<p>Xen과 Linux 커널을 부팅하는 데 필요한 다중 부팅 표준을 지원하기 때문에 " -"GRUB가 필요합니다.</p>" +#. xen domain0 installation help text - 3/4 +#: src/modules/VirtConfig.rb:224 +msgid "<p>GRUB is needed because it supports the multiboot standard required to boot Xen and the Linux kernel.</p>" +msgstr "<p>Xen과 Linux 커널을 부팅하는 데 필요한 다중 부팅 표준을 지원하기 때문에 GRUB가 필요합니다.</p>" -#. xen domain0 installation help text - 4/4 -#: src/modules/VirtConfig.rb:228 -msgid "" -"<p>When the configuration has finished successfully, you can boot the VM " -"Server from the boot loader menu.</p>" -msgstr "" -"<p>구성이 완료되면 부트 로더 메뉴에서 VM 서버를 부팅할 수 있습니다.</p>" +#. xen domain0 installation help text - 4/4 +#: src/modules/VirtConfig.rb:228 +msgid "<p>When the configuration has finished successfully, you can boot the VM Server from the boot loader menu.</p>" +msgstr "<p>구성이 완료되면 부트 로더 메뉴에서 VM 서버를 부팅할 수 있습니다.</p>" -#. error popup -#: src/modules/VirtConfig.rb:233 +#. error popup +#: src/modules/VirtConfig.rb:233 msgid "The installation will be aborted." msgstr "설치가 중단됩니다." -#: src/modules/VirtConfig.rb:236 +#: src/modules/VirtConfig.rb:236 msgid "Choose Hypervisor(s) to install" msgstr "설치할 Hypervisor 선택" -#: src/modules/VirtConfig.rb:239 +#: src/modules/VirtConfig.rb:239 msgid "Server: Minimal system to get a running Hypervisor" msgstr "서버: Hypervisor 실행을 위한 최소 시스템" -#: src/modules/VirtConfig.rb:240 +#: src/modules/VirtConfig.rb:240 msgid "Tools: Configure, manage and monitor virtual machines" msgstr "도구: 가상 시스템의 구성, 관리 및 모니터링" -#: src/modules/VirtConfig.rb:241 -msgid "" -"A disabled checkbox means the Hypervisor item has already been installed" +#: src/modules/VirtConfig.rb:241 +msgid "A disabled checkbox means the Hypervisor item has already been installed" msgstr "비활성화된 체크박스는 이미 설치된 Hypervisor 항목을 의미합니다" -#: src/modules/VirtConfig.rb:254 +#: src/modules/VirtConfig.rb:254 msgid "KVM Hypervisor" msgstr "KVM Hypervisor" -#: src/modules/VirtConfig.rb:256 +#: src/modules/VirtConfig.rb:256 msgid "KVM server" msgstr "KVM 서버" -#: src/modules/VirtConfig.rb:257 +#: src/modules/VirtConfig.rb:257 msgid "KVM tools" msgstr "KVM 도구" -#: src/modules/VirtConfig.rb:262 +#: src/modules/VirtConfig.rb:262 msgid "libvirt LXC containers" msgstr "libvirt LXC 컨테이너" -#: src/modules/VirtConfig.rb:264 +#: src/modules/VirtConfig.rb:264 msgid "libvirt LXC daemon" msgstr "libvirt LXC 데몬" -#: src/modules/VirtConfig.rb:292 +#: src/modules/VirtConfig.rb:292 msgid "Software to connect to Virtualization server" msgstr "가상화 서버에 연결할 소프트웨어" -#: src/modules/VirtConfig.rb:294 +#: src/modules/VirtConfig.rb:294 msgid "Virtualization client tools" msgstr "가상화 클라이언트 도구" -#: src/modules/VirtConfig.rb:310 +#: src/modules/VirtConfig.rb:310 msgid "Xen Hypervisor" msgstr "Xen Hypervisor" -#: src/modules/VirtConfig.rb:312 +#: src/modules/VirtConfig.rb:312 msgid "Xen server" msgstr "Xen 서버" -#: src/modules/VirtConfig.rb:313 +#: src/modules/VirtConfig.rb:313 msgid "Xen tools" msgstr "Xen 도구" -#. SLED doesn't have any installation capabilities (L3 support) -#: src/modules/VirtConfig.rb:418 +#. SLED doesn't have any installation capabilities (L3 support) +#: src/modules/VirtConfig.rb:418 msgid "Package installation failed\n" msgstr "패키지 설치 실패\n" -#: src/modules/VirtConfig.rb:426 +#: src/modules/VirtConfig.rb:426 msgid "Package installation failed for lxc\n" msgstr "lxc에 대한 패키지 설치 실패\n" -#: src/modules/VirtConfig.rb:433 +#: src/modules/VirtConfig.rb:433 msgid "Package installation failed for sled client pattern\n" msgstr "sled 클라이언트 패턴에 대한 패키지 설치 실패\n" -#: src/modules/VirtConfig.rb:443 +#: src/modules/VirtConfig.rb:443 msgid "Package installation failed for sles patterns\n" msgstr "sles 패턴에 대한 패키지 설치 실패\n" -#. Assume python gtk is installed. If in text mode we don't care -#: src/modules/VirtConfig.rb:456 +#. Assume python gtk is installed. If in text mode we don't care +#: src/modules/VirtConfig.rb:456 msgid "Running in text mode. Install graphical components anyway?" msgstr "텍스트 모드로 실행 중입니다. GUI 구성 요소를 설치하시겠습니까?" -#. progressbar title - check whether Xen packages are installed -#: src/modules/VirtConfig.rb:469 +#. progressbar title - check whether Xen packages are installed +#: src/modules/VirtConfig.rb:469 msgid "Checking packages..." msgstr "패키지 점검 중..." -#. progressbar title - install the required packages -#: src/modules/VirtConfig.rb:472 +#. progressbar title - install the required packages +#: src/modules/VirtConfig.rb:472 msgid "Installing packages..." msgstr "패키지 설치중..." -#. error popup -#. Now see if they really were installed (bnc#508347) -#: src/modules/VirtConfig.rb:477 src/modules/VirtConfig.rb:484 +#. error popup +#. Now see if they really were installed (bnc#508347) +#: src/modules/VirtConfig.rb:477 src/modules/VirtConfig.rb:484 msgid "Cannot install required packages." msgstr "필요한 패키지를 설치할 수 없습니다." -#. If grub2 is the bootloader and we succesfully installed Xen, update the grub2 files -#: src/modules/VirtConfig.rb:494 +#. If grub2 is the bootloader and we succesfully installed Xen, update the grub2 files +#: src/modules/VirtConfig.rb:494 msgid "Updating grub2 configuration files..." msgstr "grub2 구성 파일을 업데이트하는 중..." -#. Default Bridge stage -#: src/modules/VirtConfig.rb:508 +#. Default Bridge stage +#: src/modules/VirtConfig.rb:508 msgid "Configuring Default Network Bridge..." msgstr "기본 네트워크 브리지 구성 중..." -#. Popup yes/no dialog -#: src/modules/VirtConfig.rb:529 +#. Popup yes/no dialog +#: src/modules/VirtConfig.rb:529 msgid "Network Bridge." msgstr "네트워크 브리지." -#: src/modules/VirtConfig.rb:530 -msgid "" -"<p>For normal network configurations hosting virtual machines, a network " -"bridge is recommended.</p><p>Configure a default network bridge?</p>" -msgstr "" -"<p>가상 시스템을 호스트하는 일반 네트워크 구성에는 네트워크 브리지가 권장됩니" -"다.</p><p>기본 네트워크 브리지를 구성하시겠습니까?</p>" +#: src/modules/VirtConfig.rb:530 +msgid "<p>For normal network configurations hosting virtual machines, a network bridge is recommended.</p><p>Configure a default network bridge?</p>" +msgstr "<p>가상 시스템을 호스트하는 일반 네트워크 구성에는 네트워크 브리지가 권장됩니다.</p><p>기본 네트워크 브리지를 구성하시겠습니까?</p>" -#. Firewall stage - modify the firewall setting, add the xen bridge to FW_FORWARD_ALWAYS_INOUT_DEV -#. Progress::NextStage(); -#. Configure firewall to allow xenbr+ -#. success = success && ConfigureFirewall(); -#. if ( success == false ) { -#. // error popup -#. Report::Error(_("Failed to configure the firewall to allow the Xen bridge") + "\n" + abortmsg); -#. return false; -#. } -#: src/modules/VirtConfig.rb:599 +#. Firewall stage - modify the firewall setting, add the xen bridge to FW_FORWARD_ALWAYS_INOUT_DEV +#. Progress::NextStage(); +#. Configure firewall to allow xenbr+ +#. success = success && ConfigureFirewall(); +#. if ( success == false ) { +#. // error popup +#. Report::Error(_("Failed to configure the firewall to allow the Xen bridge") + "\n" + abortmsg); +#. return false; +#. } +#: src/modules/VirtConfig.rb:599 msgid "KVM components are installed. Your host is ready to install KVM guests." -msgstr "" -"KVM 구성요소가 설치되어 있습니다. 호스트가 KVM 게스트를 설치할 준비가 되었습" -"니다." +msgstr "KVM 구성요소가 설치되어 있습니다. 호스트가 KVM 게스트를 설치할 준비가 되었습니다." -#: src/modules/VirtConfig.rb:602 -msgid "" -"KVM components are installed. Reboot the machine and select the native " -"kernel in the boot loader menu to install KVM guests." -msgstr "" -"KVM 구성요소가 설치되어 있습니다. 컴퓨터를 재부팅하고 부트 로더 메뉴에서 기" -"본 커널을 선택하여 KVM 게스트를 설치하십시오." +#: src/modules/VirtConfig.rb:602 +msgid "KVM components are installed. Reboot the machine and select the native kernel in the boot loader menu to install KVM guests." +msgstr "KVM 구성요소가 설치되어 있습니다. 컴퓨터를 재부팅하고 부트 로더 메뉴에서 기본 커널을 선택하여 KVM 게스트를 설치하십시오." -#: src/modules/VirtConfig.rb:605 -msgid "" -"For installing Xen guests, reboot the machine and select the Xen section in " -"the boot loader menu." -msgstr "" -"Xen 게스트를 설치하는 경우 시스템을 재부팅하고 부트 로더 메뉴에서 Xen 섹션을 " -"선택하십시오." +#: src/modules/VirtConfig.rb:605 +msgid "For installing Xen guests, reboot the machine and select the Xen section in the boot loader menu." +msgstr "Xen 게스트를 설치하는 경우 시스템을 재부팅하고 부트 로더 메뉴에서 Xen 섹션을 선택하십시오." -#: src/modules/VirtConfig.rb:608 +#: src/modules/VirtConfig.rb:608 msgid "Xen Hypervisor and tools are installed." msgstr "Xen Hypervisor 및 도구가 설치되어 있습니다." -#: src/modules/VirtConfig.rb:609 +#: src/modules/VirtConfig.rb:609 msgid "Virtualization client tools are installed." msgstr "가상화 클라이언트 도구가 설치되어 있습니다." -#: src/modules/VirtConfig.rb:610 +#: src/modules/VirtConfig.rb:610 msgid "Libvirt LXC components are installed." msgstr "Libvirt LXC 구성요소가 설치되어 있습니다." Modified: branches/SLE12-SP3/yast/ko/po/vpn.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/vpn.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/vpn.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,43 +14,41 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Manage VPN client secrets. -#: src/lib/vpn/edit_client_secrets.rb:56 +#. Manage VPN client secrets. +#: src/lib/vpn/edit_client_secrets.rb:56 msgid "Pre-shared key for gateways" msgstr "게이트웨이에 대한 미리 공유된 키" -#: src/lib/vpn/edit_client_secrets.rb:57 -#: src/lib/vpn/edit_client_secrets.rb:62 +#: src/lib/vpn/edit_client_secrets.rb:57 src/lib/vpn/edit_client_secrets.rb:62 msgid "Gateway IP" msgstr "게이트웨이" -#: src/lib/vpn/edit_client_secrets.rb:57 +#: src/lib/vpn/edit_client_secrets.rb:57 msgid "Pre-shared key" msgstr "미리 공유된 키" -#: src/lib/vpn/edit_client_secrets.rb:59 -#: src/lib/vpn/edit_client_secrets.rb:63 +#: src/lib/vpn/edit_client_secrets.rb:59 src/lib/vpn/edit_client_secrets.rb:63 msgid "Set" msgstr "설정" -#: src/lib/vpn/edit_client_secrets.rb:60 src/lib/vpn/edit_gw_secrets.rb:188 +#: src/lib/vpn/edit_client_secrets.rb:60 src/lib/vpn/edit_gw_secrets.rb:188 msgid "Show key" msgstr "키 표시" -#: src/lib/vpn/edit_client_secrets.rb:61 +#: src/lib/vpn/edit_client_secrets.rb:61 msgid "Certificate/key pair for gateways" msgstr "게이트웨이에 대한 인증서/키 쌍" -#: src/lib/vpn/edit_client_secrets.rb:62 +#: src/lib/vpn/edit_client_secrets.rb:62 msgid "Certificate" msgstr "인증서" -#: src/lib/vpn/edit_client_secrets.rb:62 +#: src/lib/vpn/edit_client_secrets.rb:62 msgid "Key" msgstr "키" -#. Make sure that tables are filled, then save all settings. -#: src/lib/vpn/edit_client_secrets.rb:121 +#. Make sure that tables are filled, then save all settings. +#: src/lib/vpn/edit_client_secrets.rb:121 msgid "" "Shared keys for the following gateways are still missing:\n" "%s" @@ -58,7 +56,7 @@ "다음 게이트웨이에 대한 공유 키가 누락되었습니다.\n" "%s" -#: src/lib/vpn/edit_client_secrets.rb:127 +#: src/lib/vpn/edit_client_secrets.rb:127 msgid "" "Certificates for the following gateways are still missing:\n" "%s" @@ -66,118 +64,116 @@ "다음 게이트웨이에 대한 인증서가 누락되었습니다.\n" "%s" -#. Load PSKs -#. Reload gateway PSK text input. -#. Load XAuth -#. Load EAP -#: src/lib/vpn/edit_client_secrets.rb:140 src/lib/vpn/edit_gw_secrets.rb:224 -#: src/lib/vpn/edit_gw_secrets.rb:233 src/lib/vpn/edit_gw_secrets.rb:239 +#. Load PSKs +#. Reload gateway PSK text input. +#. Load XAuth +#. Load EAP +#: src/lib/vpn/edit_client_secrets.rb:140 src/lib/vpn/edit_gw_secrets.rb:224 +#: src/lib/vpn/edit_gw_secrets.rb:233 src/lib/vpn/edit_gw_secrets.rb:239 msgid "(hidden)" msgstr "(숨김)" -#. Remove the selected EAP user. -#. Remove the selected XAuth user. -#: src/lib/vpn/edit_gw_secrets.rb:120 src/lib/vpn/edit_gw_secrets.rb:141 +#. Remove the selected EAP user. +#. Remove the selected XAuth user. +#: src/lib/vpn/edit_gw_secrets.rb:120 src/lib/vpn/edit_gw_secrets.rb:141 msgid "Please select a user to delete." msgstr "삭제할 사용자를 선택하십시오." -#. Save PSK and certificate settings. Note that XAUTH and EAP user lists are already saved. -#: src/lib/vpn/edit_gw_secrets.rb:154 +#. Save PSK and certificate settings. Note that XAUTH and EAP user lists are already saved. +#: src/lib/vpn/edit_gw_secrets.rb:154 msgid "A pre-shared key is mandatory. Please enter a pre-shared key." msgstr "미리 공유된 키는 필수입니다. 미리 공유된 키를 입력하십시오." -#: src/lib/vpn/edit_gw_secrets.rb:166 +#: src/lib/vpn/edit_gw_secrets.rb:166 msgid "Please enter both certificate file path and key file path." msgstr "인증서 파일 경로와 키 파일 경로를 모두 입력하십시오." -#. Event handlers -#: src/lib/vpn/edit_gw_secrets.rb:175 -#: src/lib/vpn/set_client_cert_dialog.rb:64 +#. Event handlers +#: src/lib/vpn/edit_gw_secrets.rb:175 src/lib/vpn/set_client_cert_dialog.rb:64 msgid "Pick a PEM encoded certificate file" msgstr "PEM으로 인코딩된 인증서 파일 선택" -#: src/lib/vpn/edit_gw_secrets.rb:180 -#: src/lib/vpn/set_client_cert_dialog.rb:69 +#: src/lib/vpn/edit_gw_secrets.rb:180 src/lib/vpn/set_client_cert_dialog.rb:69 msgid "Pick a PEM encoded certificate key file" msgstr "PEM으로 인코딩된 인증서 키 파일 선택" -#: src/lib/vpn/edit_gw_secrets.rb:186 +#: src/lib/vpn/edit_gw_secrets.rb:186 msgid "Gateway pre-shared key" msgstr "게이트웨이 미리 공유된 키" -#: src/lib/vpn/edit_gw_secrets.rb:192 +#: src/lib/vpn/edit_gw_secrets.rb:192 msgid "Gateway certificate" msgstr "인증서를 생성합니다." -#: src/lib/vpn/edit_gw_secrets.rb:194 +#: src/lib/vpn/edit_gw_secrets.rb:194 msgid "Path to certificate file" msgstr "인증서 파일에 대한 경로가 필요합니다." -#: src/lib/vpn/edit_gw_secrets.rb:195 src/lib/vpn/edit_gw_secrets.rb:198 -#: src/lib/vpn/set_client_cert_dialog.rb:50 -#: src/lib/vpn/set_client_cert_dialog.rb:53 +#: src/lib/vpn/edit_gw_secrets.rb:195 src/lib/vpn/edit_gw_secrets.rb:198 +#: src/lib/vpn/set_client_cert_dialog.rb:50 +#: src/lib/vpn/set_client_cert_dialog.rb:53 msgid "Pick.." msgstr "선택.." -#: src/lib/vpn/edit_gw_secrets.rb:197 +#: src/lib/vpn/edit_gw_secrets.rb:197 msgid "Path to certificate key file" msgstr "인증서 파일에 대한 경로가 필요합니다." -#: src/lib/vpn/edit_gw_secrets.rb:202 +#: src/lib/vpn/edit_gw_secrets.rb:202 msgid "User credentials for Android, iOS, MacOS X clients" msgstr "Android, iOS, MacOS X 클라이언트용 사용자 인증서" -#: src/lib/vpn/edit_gw_secrets.rb:203 src/lib/vpn/edit_gw_secrets.rb:212 +#: src/lib/vpn/edit_gw_secrets.rb:203 src/lib/vpn/edit_gw_secrets.rb:212 msgid "Username" msgstr "사용자 이름" -#: src/lib/vpn/edit_gw_secrets.rb:203 src/lib/vpn/edit_gw_secrets.rb:212 +#: src/lib/vpn/edit_gw_secrets.rb:203 src/lib/vpn/edit_gw_secrets.rb:212 msgid "Password" msgstr "비밀번호" -#: src/lib/vpn/edit_gw_secrets.rb:205 src/lib/vpn/edit_gw_secrets.rb:214 +#: src/lib/vpn/edit_gw_secrets.rb:205 src/lib/vpn/edit_gw_secrets.rb:214 msgid "Add" msgstr "추가" -#: src/lib/vpn/edit_gw_secrets.rb:206 src/lib/vpn/edit_gw_secrets.rb:215 +#: src/lib/vpn/edit_gw_secrets.rb:206 src/lib/vpn/edit_gw_secrets.rb:215 msgid "Delete" msgstr "삭제" -#: src/lib/vpn/edit_gw_secrets.rb:207 src/lib/vpn/edit_gw_secrets.rb:216 +#: src/lib/vpn/edit_gw_secrets.rb:207 src/lib/vpn/edit_gw_secrets.rb:216 msgid "Show Password" msgstr "비밀번호 표시" -#: src/lib/vpn/edit_gw_secrets.rb:211 +#: src/lib/vpn/edit_gw_secrets.rb:211 msgid "User credentials for Windows 7, Windows 8 clients" msgstr "Windows 7, Windows 8 클라이언트용 사용자 인증서" -#. Return a user-friendly brief description of the connection. -#: src/lib/vpn/ipsec.rb:199 +#. Return a user-friendly brief description of the connection. +#: src/lib/vpn/ipsec.rb:199 msgid "Gateway - PSK" msgstr "게이트웨이 - PSK" -#: src/lib/vpn/ipsec.rb:201 +#: src/lib/vpn/ipsec.rb:201 msgid "Gateway - Certificate" msgstr "게이트웨이 - 인증서" -#: src/lib/vpn/ipsec.rb:203 +#: src/lib/vpn/ipsec.rb:203 msgid "Gateway - Mobile clients" msgstr "게이트웨이 - 모바일 클라이언트" -#: src/lib/vpn/ipsec.rb:205 +#: src/lib/vpn/ipsec.rb:205 msgid "Gateway - Windows clients" msgstr "게이트웨이 - Windows 클라이언트" -#: src/lib/vpn/ipsec.rb:207 +#: src/lib/vpn/ipsec.rb:207 msgid "Client - PSK" msgstr "클라이언트 - PSK" -#: src/lib/vpn/ipsec.rb:209 +#: src/lib/vpn/ipsec.rb:209 msgid "Client - Certificate" msgstr "클라이언트 인증서(&C)" -#. Load parameters from connections of known scenarios -#: src/lib/vpn/ipsec.rb:239 +#. Load parameters from connections of known scenarios +#: src/lib/vpn/ipsec.rb:239 msgid "" "ipsec.conf and ipsec.secrets have been manipulated outside of this module.\n" "Continue using the module will remove your customisation." @@ -185,13 +181,13 @@ "ipsec.conf 및 ipsec.secrets가 이 모듈 외부에서 조정되었습니다.\n" "모듈을 계속 사용하면 사용자 정의가 제거됩니다." -#. Create a new connection, by default it is a site-to-site client. Return true if successful. -#: src/lib/vpn/ipsec.rb:310 +#. Create a new connection, by default it is a site-to-site client. Return true if successful. +#: src/lib/vpn/ipsec.rb:310 msgid "The connection name is already used." msgstr "이미 사용 중인 도메인 이름입니다." -#. Find an unused gateway scenario -#: src/lib/vpn/ipsec.rb:327 +#. Find an unused gateway scenario +#: src/lib/vpn/ipsec.rb:327 msgid "" "You may only have one gateway connection per scenario.\n" "All of gateway scenarios are already used." @@ -199,8 +195,8 @@ "시나리오당 게이트웨이 연결이 하나만 있을 수 있습니다.\n" "모든 게이트웨이 시나리오가 이미 사용되고 있습니다." -#. Warn against duplicated configuration -#: src/lib/vpn/ipsec.rb:344 +#. Warn against duplicated configuration +#: src/lib/vpn/ipsec.rb:344 msgid "" "The scenario is already configured with another gateway.\n" "You may not have two gateways operating under one scenario." @@ -208,81 +204,76 @@ "시나리오가 다른 게이트웨이로 이미 구성되어 있습니다.\n" "하나의 시나리오에서 두 개의 게이트웨이를 운영할 수 없습니다." -#. Create the user (:xauth or :eap). Return true if successful. -#: src/lib/vpn/ipsec.rb:442 +#. Create the user (:xauth or :eap). Return true if successful. +#: src/lib/vpn/ipsec.rb:442 msgid "The user name is already used." msgstr "이 이름이 이미 사용 중입니다." -#. Set client certificate/key for a connection to remote gateway. Return true if successful, otherwise false. -#: src/lib/vpn/ipsec.rb:506 +#. Set client certificate/key for a connection to remote gateway. Return true if successful, otherwise false. +#: src/lib/vpn/ipsec.rb:506 msgid "Cannot find a matching client connection." msgstr "일치하는 클라이언트 연결을 찾을 수 없습니다." -#. Render global options, connection list, and connection configuration frames. -#: src/lib/vpn/main_dialog.rb:62 +#. Render global options, connection list, and connection configuration frames. +#: src/lib/vpn/main_dialog.rb:62 msgid "VPN Gateway and Client" msgstr "VPN 게이트웨이 및 클라이언트" -#. Left side: global config & connection management -#: src/lib/vpn/main_dialog.rb:68 +#. Left side: global config & connection management +#: src/lib/vpn/main_dialog.rb:68 msgid "Global Configuration" msgstr "전체 구성" -#: src/lib/vpn/main_dialog.rb:70 +#: src/lib/vpn/main_dialog.rb:70 msgid "Enable VPN daemon" msgstr "SSSD 데몬 활성화" -#: src/lib/vpn/main_dialog.rb:72 +#: src/lib/vpn/main_dialog.rb:72 msgid "Reduce TCP MSS" msgstr "TCP MSS 축소" -#: src/lib/vpn/main_dialog.rb:75 +#: src/lib/vpn/main_dialog.rb:75 msgid "All VPNs" msgstr "모든 VPN" -#: src/lib/vpn/main_dialog.rb:78 +#: src/lib/vpn/main_dialog.rb:78 msgid "New VPN" msgstr "새 VPN" -#: src/lib/vpn/main_dialog.rb:79 +#: src/lib/vpn/main_dialog.rb:79 msgid "Delete VPN" msgstr "DN 삭제(&D)" -#: src/lib/vpn/main_dialog.rb:81 +#: src/lib/vpn/main_dialog.rb:81 msgid "View Connection Status" msgstr "연결 상태 보기" -#. Event handlers -#. Display a help text to let user know why reducing MSS is sometimes necessary. -#: src/lib/vpn/main_dialog.rb:105 +#. Event handlers +#. Display a help text to let user know why reducing MSS is sometimes necessary. +#: src/lib/vpn/main_dialog.rb:105 msgid "" -"If VPN clients have trouble accessing certain Internet sites, it is possible " -"that the affected hosts prevent automatic MTU (maximum transmission unit) " -"discovery due to incorrect firewall configuration.\n" -"Reducing TCP-MSS will correct the situation; however, the available " -"bandwidth will be reduced by about 10%." +"If VPN clients have trouble accessing certain Internet sites, it is possible that the affected hosts prevent automatic MTU (maximum transmission unit) discovery due to incorrect firewall configuration.\n" +"Reducing TCP-MSS will correct the situation; however, the available bandwidth will be reduced by about 10%." msgstr "" -"VPN 클라이언트에서 특정 인터넷 사이트에 액세스하는 데 문제가 있는 경우 영향" -"을 받는 호스트에서 잘못된 방화벽 구성으로 인해 자동 MTU(최대 전송 단위) 검색" -"을 하지 못할 수 있습니다.\n" +"VPN 클라이언트에서 특정 인터넷 사이트에 액세스하는 데 문제가 있는 경우 영향을 받는 호스트에서 잘못된 방화벽 구성으로 인해 자동 MTU(최대 전송 단위) 검색을 하지 못할 수 있습니다.\n" "TCP-MSS를 줄이면 문제가 해결되지만 사용 가능한 대역폭이 10% 정도 줍니다." -#. Delete the chosen VPN connection. -#: src/lib/vpn/main_dialog.rb:126 +#. Delete the chosen VPN connection. +#: src/lib/vpn/main_dialog.rb:126 msgid "Delete connection" msgstr "연결 삭제" -#: src/lib/vpn/main_dialog.rb:127 +#: src/lib/vpn/main_dialog.rb:127 msgid "Are you sure to delete connection " msgstr "컨테이너 '%1'을(를) 삭제하시겠습니까?" -#. Check for incomplete configuration -#: src/lib/vpn/main_dialog.rb:146 +#. Check for incomplete configuration +#: src/lib/vpn/main_dialog.rb:146 msgid "Please complete configuration for the following connections:\n" msgstr "다음 연결에 대한 구성을 완료하십시오.\n" -#. Consider enabling the daemon -#: src/lib/vpn/main_dialog.rb:153 +#. Consider enabling the daemon +#: src/lib/vpn/main_dialog.rb:153 msgid "" "There are VPN connections but the daemon is not enabled.\n" "Would you like to enable the VPN daemon?" @@ -290,125 +281,125 @@ "VPN 연결이 있지만 데몬이 활성화되지 않았습니다.\n" "VPN 데몬을 활성화하시겠습니까?" -#. Ask user whether he wants to view daemon log -#: src/lib/vpn/main_dialog.rb:174 +#. Ask user whether he wants to view daemon log +#: src/lib/vpn/main_dialog.rb:174 msgid "Settings have been successfully applied." msgstr "'%s' 서비스가 활성화되었습니다." -#: src/lib/vpn/main_dialog.rb:176 +#: src/lib/vpn/main_dialog.rb:176 msgid "Failed to configure IPSec daemon." msgstr "IPSec 데몬을 구성하지 못했습니다." -#: src/lib/vpn/main_dialog.rb:179 +#: src/lib/vpn/main_dialog.rb:179 msgid "Would you like to view daemon log and connection status?" msgstr "데몬 로그 및 연결 상태를 확인하시겠습니까?" -#. Open dialog to edit VPN client passwords/certificates. -#: src/lib/vpn/main_dialog.rb:292 +#. Open dialog to edit VPN client passwords/certificates. +#: src/lib/vpn/main_dialog.rb:292 msgid "Please enter gateway IP before editing credentials." msgstr "인증서를 편집하기 전에 게이트웨이 IP를 입력하십시오." -#. Render a table of configured gateway and client connections. -#: src/lib/vpn/main_dialog.rb:368 +#. Render a table of configured gateway and client connections. +#: src/lib/vpn/main_dialog.rb:368 msgid "Name" msgstr "이름" -#: src/lib/vpn/main_dialog.rb:368 +#: src/lib/vpn/main_dialog.rb:368 msgid "Description" msgstr "설명" -#. Render configuration controls for the chosen connection. -#: src/lib/vpn/main_dialog.rb:383 +#. Render configuration controls for the chosen connection. +#: src/lib/vpn/main_dialog.rb:383 msgid "Click 'New VPN' to create a gateway or client." msgstr "게이트웨이 또는 클라이언트를 생성하려면 '새 VPN'을 클릭하십시오." -#. Make widgets for connection configuration -#: src/lib/vpn/main_dialog.rb:393 +#. Make widgets for connection configuration +#: src/lib/vpn/main_dialog.rb:393 msgid "All IPv4 networks (0.0.0.0/0)" msgstr "모든 IPv4 네트워크(0.0.0.0/0)" -#: src/lib/vpn/main_dialog.rb:394 +#: src/lib/vpn/main_dialog.rb:394 msgid "All IPv6 networks (::/0)" msgstr "모든 IPv6 네트워크(::/0)" -#: src/lib/vpn/main_dialog.rb:396 +#: src/lib/vpn/main_dialog.rb:396 msgid "Limited CIDRs, comma separated:" msgstr "제한된 CIDR, 쉼표로 구분됨:" -#: src/lib/vpn/main_dialog.rb:402 +#: src/lib/vpn/main_dialog.rb:402 msgid "Connection name: " msgstr "연결 이름:" -#: src/lib/vpn/main_dialog.rb:403 +#: src/lib/vpn/main_dialog.rb:403 msgid "Type" msgstr "유형" -#: src/lib/vpn/main_dialog.rb:405 +#: src/lib/vpn/main_dialog.rb:405 msgid "Gateway (Server)" msgstr "게이트웨이(서버)" -#: src/lib/vpn/main_dialog.rb:406 +#: src/lib/vpn/main_dialog.rb:406 msgid "Client" msgstr "클라이언트" -#: src/lib/vpn/main_dialog.rb:413 +#: src/lib/vpn/main_dialog.rb:413 msgid "The scenario is" msgstr "시나리오:" -#: src/lib/vpn/main_dialog.rb:415 +#: src/lib/vpn/main_dialog.rb:415 msgid "Secure communication with a pre-shared key" msgstr "미리 공유된 키를 사용한 보안 통신" -#: src/lib/vpn/main_dialog.rb:416 +#: src/lib/vpn/main_dialog.rb:416 msgid "Secure communication with a certificate" msgstr "인증서를 사용한 보안 통신" -#: src/lib/vpn/main_dialog.rb:417 +#: src/lib/vpn/main_dialog.rb:417 msgid "Provide access to Android, iOS, MacOS X clients" msgstr "Android, iOS, MacOS X 클라이언트에 대한 액세스 권한 제공" -#: src/lib/vpn/main_dialog.rb:418 +#: src/lib/vpn/main_dialog.rb:418 msgid "Provide access to Windows 7, Windows 8 clients" msgstr "Windows 7, Windows 8 클라이언트에 대한 액세스 권한 제공" -#: src/lib/vpn/main_dialog.rb:420 src/lib/vpn/main_dialog.rb:434 +#: src/lib/vpn/main_dialog.rb:420 src/lib/vpn/main_dialog.rb:434 msgid "Edit Credentials" msgstr "외부 인증서(&X)" -#: src/lib/vpn/main_dialog.rb:423 +#: src/lib/vpn/main_dialog.rb:423 msgid "Provide VPN clients access to" msgstr "VPN 클라이언트에 다음에 대한 액세스 권한 제공" -#: src/lib/vpn/main_dialog.rb:424 +#: src/lib/vpn/main_dialog.rb:424 msgid "Clients' address pool (e.g. 192.168.100.0/24)" msgstr "클라이언트 주소 풀(예: 192.168.100.0/24)" -#: src/lib/vpn/main_dialog.rb:428 +#: src/lib/vpn/main_dialog.rb:428 msgid "The gateway requires authentication" msgstr "게이트웨이에 인증 필요" -#: src/lib/vpn/main_dialog.rb:430 +#: src/lib/vpn/main_dialog.rb:430 msgid "By a pre-shared key" msgstr "미리 공유된 키로" -#: src/lib/vpn/main_dialog.rb:431 +#: src/lib/vpn/main_dialog.rb:431 msgid "By a certificate" msgstr "인증서로" -#: src/lib/vpn/main_dialog.rb:433 +#: src/lib/vpn/main_dialog.rb:433 msgid "VPN gateway IP" msgstr "VPN 게이트웨이 IP" -#: src/lib/vpn/main_dialog.rb:437 +#: src/lib/vpn/main_dialog.rb:437 msgid "Use the VPN tunnel to access" msgstr "VPN 터널을 사용하여 액세스" -#. They are however allowed in password -#: src/lib/vpn/new_user_dialog.rb:64 +#. They are however allowed in password +#: src/lib/vpn/new_user_dialog.rb:64 msgid "Please enter both username and password." msgstr "사용자 이름과 비밀번호를 모두 입력하십시오." -#: src/lib/vpn/new_user_dialog.rb:68 +#: src/lib/vpn/new_user_dialog.rb:68 msgid "" "Please refrain from using special characters and spaces in the username.\n" "Acceptable characters are: A-Z, a-z, 0-9, dash, underscore" @@ -416,17 +407,17 @@ "사용자 이름에 특수 문자와 공백을 사용하지 마십시오.\n" "허용 가능한 문자는 A-Z, a-z, 0-9, 대시, 밑줄입니다." -#. Create a new VPN connection - by default it is a site-to-site gateway. -#: src/lib/vpn/new_vpn_dialog.rb:46 +#. Create a new VPN connection - by default it is a site-to-site gateway. +#: src/lib/vpn/new_vpn_dialog.rb:46 msgid "Please enter a name for the new VPN connection" msgstr "새 도메인에 대한 이름을 입력합니다." -#. Return :ok if new VPN connection is created, otherwise :cancel. -#: src/lib/vpn/new_vpn_dialog.rb:58 +#. Return :ok if new VPN connection is created, otherwise :cancel. +#: src/lib/vpn/new_vpn_dialog.rb:58 msgid "Please enter a VPN connection name." msgstr "VPN 연결 이름을 입력하십시오." -#: src/lib/vpn/new_vpn_dialog.rb:62 +#: src/lib/vpn/new_vpn_dialog.rb:62 msgid "" "Please refrain from using special characters and spaces in the name.\n" "Acceptable characters are: A-Z, a-z, 0-9, dash, underscore\n" @@ -436,52 +427,52 @@ "허용 가능한 문자는 A-Z, a-z, 0-9, 대시, 밑줄입니다.\n" "이름은 문자로 시작해야 합니다." -#. Ask for a new certificate/key combination for a VPN client -#: src/lib/vpn/set_client_cert_dialog.rb:49 +#. Ask for a new certificate/key combination for a VPN client +#: src/lib/vpn/set_client_cert_dialog.rb:49 msgid "Path to certificate file:" msgstr "인증서 파일에 대한 경로가 필요합니다." -#: src/lib/vpn/set_client_cert_dialog.rb:52 +#: src/lib/vpn/set_client_cert_dialog.rb:52 msgid "Path to certificate key file:" msgstr "인증서 파일에 대한 경로가 필요합니다." -#: src/lib/vpn/set_client_cert_dialog.rb:54 +#: src/lib/vpn/set_client_cert_dialog.rb:54 msgid "Please do not store the key in the certificate file itself." msgstr "키를 인증서 파일 자체에 저장하지 마십시오." -#. Return tuple of certificate and certificate key locations. -#: src/lib/vpn/set_client_cert_dialog.rb:80 +#. Return tuple of certificate and certificate key locations. +#: src/lib/vpn/set_client_cert_dialog.rb:80 msgid "Please enter both certificate file and key file." msgstr "인증서 파일과 키 파일을 모두 입력하십시오." -#. Return password string. -#: src/lib/vpn/set_client_psk_dialog.rb:59 +#. Return password string. +#: src/lib/vpn/set_client_psk_dialog.rb:59 msgid "Please enter a password." msgstr "비밀번호를 입력하십시오." -#. View log dialog displays current status about all IPSec connections. -#: src/lib/vpn/view_log_dialog.rb:47 +#. View log dialog displays current status about all IPSec connections. +#: src/lib/vpn/view_log_dialog.rb:47 msgid "VPN daemon status" msgstr "VPN 데몬 상태" -#: src/lib/vpn/view_log_dialog.rb:48 +#: src/lib/vpn/view_log_dialog.rb:48 msgid "All connection status" msgstr "모든 연결 상태" -#: src/lib/vpn/view_log_dialog.rb:49 +#: src/lib/vpn/view_log_dialog.rb:49 msgid "The logs are refreshed automatically every 3 seconds." msgstr "로고는 3초마다 자동으로 새로 고쳐집니다." -#: src/lib/vpn/view_log_dialog.rb:51 +#: src/lib/vpn/view_log_dialog.rb:51 msgid "Restart VPN Daemon" msgstr "NTP 데몬 다시 시작" -#. Restart IPSec daemon service. -#: src/lib/vpn/view_log_dialog.rb:76 +#. Restart IPSec daemon service. +#: src/lib/vpn/view_log_dialog.rb:76 msgid "Confirm daemon restart" msgstr "네트워크 다시 시작 확인" -#: src/lib/vpn/view_log_dialog.rb:77 +#: src/lib/vpn/view_log_dialog.rb:77 msgid "" "Existing connections will be interrupted.\n" "Do you still wish to continue?" @@ -489,32 +480,32 @@ "기존 연결이 중단됩니다.\n" "계속하시겠습니까?" -#: src/lib/vpn/view_log_dialog.rb:81 +#: src/lib/vpn/view_log_dialog.rb:81 msgid "Failed to restart IPSec daemon" msgstr "CUPS 데몬을 재시작하지 못했습니다." -#. Read daemon status and refresh the content of log views. -#: src/lib/vpn/view_log_dialog.rb:100 +#. Read daemon status and refresh the content of log views. +#: src/lib/vpn/view_log_dialog.rb:100 msgid "Status not available: is the daemon running?" msgstr "상태를 사용할 수 없음: 데몬이 실행 중입니까?" -#. Install packages -#: src/modules/IPSecConf.rb:162 +#. Install packages +#: src/modules/IPSecConf.rb:162 msgid "Failed to install IPSec packages." msgstr "패키지를 설치하지 못했습니다." -#. Enable/disable daemon -#: src/modules/IPSecConf.rb:175 +#. Enable/disable daemon +#: src/modules/IPSecConf.rb:175 msgid "Failed to start IPSec daemon." msgstr "CUPS 데몬을 시작하지 못했습니다." -#. Configure IP forwarding -#: src/modules/IPSecConf.rb:205 +#. Configure IP forwarding +#: src/modules/IPSecConf.rb:205 msgid "Failed to apply IP forwarding settings using sysctl:" msgstr "sysctl을 사용하여 IP 전달 설정을 적용하지 못했습니다." -#. Configure/deconfigure firewall -#: src/modules/IPSecConf.rb:218 +#. Configure/deconfigure firewall +#: src/modules/IPSecConf.rb:218 msgid "" "SuSE firewall is enabled but not activated.\n" "In order for VPN to function properly, SuSE firewall will now be activated." @@ -522,45 +513,43 @@ "SuSE 방화벽이 사용 가능하지만 활성화되지 않았습니다.\n" "VPN이 올바로 작동하도록 SuSE 방화벽이 지금 활성화됩니다." -#: src/modules/IPSecConf.rb:222 src/modules/IPSecConf.rb:227 +#: src/modules/IPSecConf.rb:222 src/modules/IPSecConf.rb:227 msgid "Failed to restart SuSE firewall." msgstr "SuSE 방화벽을 재시작하지 못했습니다." -#: src/modules/IPSecConf.rb:233 +#: src/modules/IPSecConf.rb:233 msgid "" "Both VPN gateway and clients require special SuSE firewall configuration.\n" -"SuSE firewall is not enabled, therefore you must manually run the " -"configuration script on every reboot. The script will be run now.\n" +"SuSE firewall is not enabled, therefore you must manually run the configuration script on every reboot. The script will be run now.\n" "The script is located at %s" msgstr "" "VPN 게이트웨이 및 클라이언트 모두에 특수한 SuSE 방화벽 구성이 필요합니다.\n" -"SuSE 방화벽이 사용 가능하지 않으므로 재부팅할 때마다 구성 스크립트를 수동으" -"로 실행해야 합니다. 지금 스크립트가 실행됩니다.\n" +"SuSE 방화벽이 사용 가능하지 않으므로 재부팅할 때마다 구성 스크립트를 수동으로 실행해야 합니다. 지금 스크립트가 실행됩니다.\n" "스크립트는 %s에 있습니다." -#. AutoYaST: Return a rich text summary of the current configuration. -#: src/modules/IPSecConf.rb:270 +#. AutoYaST: Return a rich text summary of the current configuration. +#: src/modules/IPSecConf.rb:270 msgid "VPN Global Settings" msgstr "전역 설정" -#: src/modules/IPSecConf.rb:271 +#: src/modules/IPSecConf.rb:271 msgid "Enable VPN (IPSec) daemon: %s" msgstr "VPN(IPSec) 데몬 활성화: %s" -#: src/modules/IPSecConf.rb:272 +#: src/modules/IPSecConf.rb:272 msgid "Reduce TCP MSS: %s" msgstr "TCP MSS 축소: %s" -#: src/modules/IPSecConf.rb:273 +#: src/modules/IPSecConf.rb:273 msgid "Gateway and Connections" msgstr "게이트웨이 및 연결" -#. Gateway summary -#: src/modules/IPSecConf.rb:279 +#. Gateway summary +#: src/modules/IPSecConf.rb:279 msgid "A gateway serving clients in " msgstr "다음에서 클라이언트를 지원하는 게이트웨이 " -#. Client summary -#: src/modules/IPSecConf.rb:283 +#. Client summary +#: src/modules/IPSecConf.rb:283 msgid "A client connecting to " msgstr "SUSE 인터넷 연결 도구 " Modified: branches/SLE12-SP3/yast/ko/po/wol.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/wol.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/wol.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,35 +14,35 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#. File: clients/wol.ycp -#. Package: Boot Server -#. Author: Anas Nashif -#. Summary: WOL -#. -#. $Id$ -#: src/clients/wol.rb:49 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#. File: clients/wol.ycp +#. Package: Boot Server +#. Author: Anas Nashif +#. Summary: WOL +#. +#. $Id$ +#: src/clients/wol.rb:49 msgid "" "Package could not be installed.\n" "Install the missing packages and try again." @@ -50,24 +50,24 @@ "패키지를 설치할 수 없습니다.\n" "누락된 패키지를 설치하고 다시 시도하십시오." -#. Table header -#: src/clients/wol.rb:64 +#. Table header +#: src/clients/wol.rb:64 msgid "MAC Address" msgstr "MAC 주소" -#: src/clients/wol.rb:64 +#: src/clients/wol.rb:64 msgid "Host Name" msgstr "호스트 이름" -#: src/clients/wol.rb:66 +#: src/clients/wol.rb:66 msgid "Wake Up" msgstr "부팅하기" -#: src/clients/wol.rb:76 +#: src/clients/wol.rb:76 msgid "Wake-On-Lan" msgstr "WOL(Wake On Lan)" -#: src/clients/wol.rb:77 +#: src/clients/wol.rb:77 msgid "" "<h2>Wake on LAN</h2>\n" "<p>With WOL, you can 'wake up' your PC simply by sending a 'magic packet' \n" @@ -77,20 +77,20 @@ "<p>WOL을 사용하면 네트워크를 통해 '매직 패킷'을 보내는 것만으로도 \n" " PC를 '부팅'할 수 있습니다.</p>" -#. UI::ChangeWidget(`id(`edit_button), `Enabled, false); -#: src/clients/wol.rb:127 +#. UI::ChangeWidget(`id(`edit_button), `Enabled, false); +#: src/clients/wol.rb:127 msgid "Really delete this item?" msgstr "이 항목을 삭제하시겠습니까?" -#: src/clients/wol.rb:146 +#: src/clients/wol.rb:146 msgid "Waking remote host" msgstr "원격 호스트 부팅" -#: src/clients/wol.rb:171 +#: src/clients/wol.rb:171 msgid "Host Name:" msgstr "호스트 이름:" -#: src/clients/wol.rb:173 +#: src/clients/wol.rb:173 msgid "" "MAC Address of\n" "the Client: " @@ -98,8 +98,8 @@ "클라이언트의\n" "MAC 주소: " -#. read mac addr. from dhcpd.conf -#: src/modules/WOL.rb:101 +#. read mac addr. from dhcpd.conf +#: src/modules/WOL.rb:101 msgid "" "No previously configured clients found.\n" "However, a DHCP configuration was found on this system. Import the host\n" Modified: branches/SLE12-SP3/yast/ko/po/xpram.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/xpram.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/xpram.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,139 +14,126 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Command line help text for the Xxpram module -#: src/clients/xpram.rb:51 +#. Command line help text for the Xxpram module +#: src/clients/xpram.rb:51 msgid "Configuration of XPRAM" msgstr "XPRAM 구성" -#. command line help text for 'enable' action -#: src/clients/xpram.rb:61 +#. command line help text for 'enable' action +#: src/clients/xpram.rb:61 msgid "Enable XPRAM" msgstr "XPRAM 활성화" -#. command line help text for 'disable' action -#: src/clients/xpram.rb:68 +#. command line help text for 'disable' action +#: src/clients/xpram.rb:68 msgid "Disable XPRAM" msgstr "XPRAM 비활성화" -#. command line help text for 'configure' action -#: src/clients/xpram.rb:78 +#. command line help text for 'configure' action +#: src/clients/xpram.rb:78 msgid "Change the XPRAM configuration" msgstr "XPRAM 구성을 변경하십시오." -#. command line help text for the 'mountpoint' option -#: src/clients/xpram.rb:86 +#. command line help text for the 'mountpoint' option +#: src/clients/xpram.rb:86 msgid "Mount point" msgstr "마운트 포인트" -#. For translators: Caption of the dialog -#: src/include/s390/xpram/ui.rb:48 +#. For translators: Caption of the dialog +#: src/include/s390/xpram/ui.rb:48 msgid "XPRAM Configuration" msgstr "XPRAM 구성" -#. help text for XPRAM 1/4 -#: src/include/s390/xpram/ui.rb:51 +#. help text for XPRAM 1/4 +#: src/include/s390/xpram/ui.rb:51 msgid "<p>Here, configure the <b>XPRAM</b> for your computer.</p>" msgstr "<p>여기서 컴퓨터의 <b>XPRAM</b>을 구성합니다.</p>" -#. help text for XPRAM 2/4 -#: src/include/s390/xpram/ui.rb:53 -msgid "" -"<p>This tool currently only supports assigning the entire XPRAM to one " -"partition. To have multiple partitions, look at \"Device Drivers, Features " -"and Commands November 30, 2004\" for the Linux kernel 2.6 - April 2004 " -"stream.</p><p>In this case disable XPRAM in this module.</p>" -msgstr "" -"<p>이 도구는 현재 하나의 파티션에 전체 XPRAM을 할당하는 기능만 지원합니다. 여" -"러 파티션을 가지려면 Linux 커널 2.6 - 2004년 4월 스트림의 \"장치 드라이버, 기" -"능 및 명령 2004년 11월 30일\"을 참조하십시오.</p><p>이 경우 이 모듈에서 XPRAM" -"을 비활성화하십시오.</p>" +#. help text for XPRAM 2/4 +#: src/include/s390/xpram/ui.rb:53 +msgid "<p>This tool currently only supports assigning the entire XPRAM to one partition. To have multiple partitions, look at \"Device Drivers, Features and Commands November 30, 2004\" for the Linux kernel 2.6 - April 2004 stream.</p><p>In this case disable XPRAM in this module.</p>" +msgstr "<p>이 도구는 현재 하나의 파티션에 전체 XPRAM을 할당하는 기능만 지원합니다. 여러 파티션을 가지려면 Linux 커널 2.6 - 2004년 4월 스트림의 \"장치 드라이버, 기능 및 명령 2004년 11월 30일\"을 참조하십시오.</p><p>이 경우 이 모듈에서 XPRAM을 비활성화하십시오.</p>" -#. help text for XPRAM 3/4 -#: src/include/s390/xpram/ui.rb:57 +#. help text for XPRAM 3/4 +#: src/include/s390/xpram/ui.rb:57 msgid "<p>Choose the correct mount point for <b>Mount Point</b>.</p>" -msgstr "" -"<p><b>마운트 포인트</b>에 대해 정확한 마운트 포인트를 선택하십시오.</p>" +msgstr "<p><b>마운트 포인트</b>에 대해 정확한 마운트 포인트를 선택하십시오.</p>" -#. help text for XPRAM 4/4 -#: src/include/s390/xpram/ui.rb:59 +#. help text for XPRAM 4/4 +#: src/include/s390/xpram/ui.rb:59 msgid "<p>Next, choose the file system to use on the device.</p>" msgstr "<p>그런 다음 장치에 사용할 파일 시스템을 선택하십시오.</p>" -#. radio button label for to not start xpram -#: src/include/s390/xpram/ui.rb:83 +#. radio button label for to not start xpram +#: src/include/s390/xpram/ui.rb:83 msgid "Do No&t Start XPRAM" msgstr "XPRAM을 시작하지 않음(&T)" -#. radio button label for to start xpram -#: src/include/s390/xpram/ui.rb:92 +#. radio button label for to start xpram +#: src/include/s390/xpram/ui.rb:92 msgid "&Start XPRAM" msgstr "XPRAM 시작(&S)" -#: src/include/s390/xpram/ui.rb:104 +#: src/include/s390/xpram/ui.rb:104 msgid "Install File System or Swap Although &XPRAM Contains Valid Data" msgstr "파일 시스템 설치 및 XPRAM에 유효한 데이터가 있어도 스왑(&X)" -#. frame label -#: src/include/s390/xpram/ui.rb:113 +#. frame label +#: src/include/s390/xpram/ui.rb:113 msgid "Mount Point" msgstr "마운트 포인트" -#. combobox label -#: src/include/s390/xpram/ui.rb:122 +#. combobox label +#: src/include/s390/xpram/ui.rb:122 msgid "&Mount Point" msgstr "마운트 포인트(&M)" -#. frame label -#: src/include/s390/xpram/ui.rb:137 +#. frame label +#: src/include/s390/xpram/ui.rb:137 msgid "File System Type" msgstr "파일 시스템 유형" -#. combobox label -#: src/include/s390/xpram/ui.rb:146 +#. combobox label +#: src/include/s390/xpram/ui.rb:146 msgid "F&ile System to Use:" msgstr "사용할 파일 시스템(&I):" -#. Xpram read dialog caption -#: src/modules/Xpram.rb:99 +#. Xpram read dialog caption +#: src/modules/Xpram.rb:99 msgid "Saving XPRAM Configuration" msgstr "XPRAM 구성 저장" -#. Progress stage 1/2 -#: src/modules/Xpram.rb:109 +#. Progress stage 1/2 +#: src/modules/Xpram.rb:109 msgid "Write the settings" msgstr "설정 기록" -#. Progress stage 2/2 -#: src/modules/Xpram.rb:111 +#. Progress stage 2/2 +#: src/modules/Xpram.rb:111 msgid "Restart the service" msgstr "서비스 재시작" -#. Progress step 1/2 -#: src/modules/Xpram.rb:115 +#. Progress step 1/2 +#: src/modules/Xpram.rb:115 msgid "Writing the settings..." msgstr "설정을 기록하는 중..." -#. Progress step 2/2 -#: src/modules/Xpram.rb:117 +#. Progress step 2/2 +#: src/modules/Xpram.rb:117 msgid "Restarting service..." msgstr "서비스 재시작 중..." -#. Progress finished -#: src/modules/Xpram.rb:119 +#. Progress finished +#: src/modules/Xpram.rb:119 msgid "Finished" msgstr "완료됨" -#: src/modules/Xpram.rb:136 +#: src/modules/Xpram.rb:136 msgid "Error stopping xpram. Try \"rcxpram stop\" manually." -msgstr "" -"xpram을 중지하는 중 오류가 발생했습니다. 수동으로 \"rcxpram stop\"을 시도하십" -"시오." +msgstr "xpram을 중지하는 중 오류가 발생했습니다. 수동으로 \"rcxpram stop\"을 시도하십시오." -#. map out = (map) SCR::Execute(.target.bash_output,"bash -x /etc/init.d/xpram start", $["TERM":"raw"]); -#. y2milestone("got %1", out); -#: src/modules/Xpram.rb:154 +#. map out = (map) SCR::Execute(.target.bash_output,"bash -x /etc/init.d/xpram start", $["TERM":"raw"]); +#. y2milestone("got %1", out); +#: src/modules/Xpram.rb:154 msgid "Error starting xpram. Try \"rcxpram start\" manually." -msgstr "" -"xpram을 시작하는 중 오류가 발생했습니다. 수동으로 \"rcxpram start\"를 시도하" -"십시오." +msgstr "xpram을 시작하는 중 오류가 발생했습니다. 수동으로 \"rcxpram start\"를 시도하십시오." Modified: branches/SLE12-SP3/yast/ko/po/yast2-apparmor.ko.po =================================================================== --- branches/SLE12-SP3/yast/ko/po/yast2-apparmor.ko.po 2017-04-20 11:42:13 UTC (rev 97305) +++ branches/SLE12-SP3/yast/ko/po/yast2-apparmor.ko.po 2017-04-20 11:43:14 UTC (rev 97306) @@ -14,38 +14,38 @@ "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -#. Globalz -#: src/clients/AA_AddProfile.rb:66 +#. Globalz +#: src/clients/AA_AddProfile.rb:66 msgid "Select File to Generate a Profile for" msgstr "프로파일을 생성할 파일 선택" -#. Check for cancel in the file choose dialog -#: src/clients/AA_AddProfile.rb:77 +#. Check for cancel in the file choose dialog +#: src/clients/AA_AddProfile.rb:77 msgid "Profile for " msgstr "다음에 대한 프로파일: " -#: src/clients/AA_AddProfile.rb:78 +#: src/clients/AA_AddProfile.rb:78 msgid " already exists." msgstr " 은(는) 이미 존재합니다." -#: src/clients/AA_AddProfile.rb:80 +#: src/clients/AA_AddProfile.rb:80 msgid "Would you like to open this profile in editing mode?" msgstr "이 프로파일을 편집 모드에서 여시겠습니까?" -#. Globalz -#. TODO ELSE POPUP NO ENTRY SELECTED ERROR -#: src/clients/AA_DeleteProfile.rb:64 -#: src/include/apparmor/profile_dialogs.rb:1481 +#. Globalz +#. TODO ELSE POPUP NO ENTRY SELECTED ERROR +#: src/clients/AA_DeleteProfile.rb:64 +#: src/include/apparmor/profile_dialogs.rb:1481 msgid "Delete profile confirmation" msgstr "프로파일 삭제 확인" -#: src/clients/AA_DeleteProfile.rb:67 -#: src/include/apparmor/profile_dialogs.rb:1484 +#: src/clients/AA_DeleteProfile.rb:67 +#: src/include/apparmor/profile_dialogs.rb:1484 msgid "Are you sure you want to delete the profile " msgstr "다음 프로파일을 삭제하시겠습니까: " -#: src/clients/AA_DeleteProfile.rb:70 -#: src/include/apparmor/profile_dialogs.rb:1487 +#: src/clients/AA_DeleteProfile.rb:70 +#: src/include/apparmor/profile_dialogs.rb:1487 msgid "" " ?\n" "After this operation the AppArmor module will reload the profile set." @@ -53,39 +53,37 @@ " ?\n" "이 작업 뒤에 AppArmor 모듈은 프로파일 세트를 다시 로드합니다." -#. Read the profiles from the SCR agent -#: src/clients/AA_DeleteProfile.rb:90 -msgid "" -"Make a selection from the listed profiles and press Next to delete the " -"profile." +#. Read the profiles from the SCR agent +#: src/clients/AA_DeleteProfile.rb:90 +msgid "Make a selection from the listed profiles and press Next to delete the profile." msgstr "나열된 프로파일에서 선택하고 [다음]을 눌러 프로파일을 삭제하십시오." -#: src/clients/AA_DeleteProfile.rb:93 +#: src/clients/AA_DeleteProfile.rb:93 msgid "Delete Profile - Choose profile to delete" msgstr "프로파일 삭제 - 삭제할 프로파일을 선택하십시오." -#. Read the profiles from the SCR agent -#: src/clients/AA_EditProfile.rb:88 +#. Read the profiles from the SCR agent +#: src/clients/AA_EditProfile.rb:88 msgid "Select a listed profile and press Edit to edit it." msgstr "나열된 프로파일을 선택하고 [편집]을 눌러 편집하십시오." -#: src/clients/AA_EditProfile.rb:89 +#: src/clients/AA_EditProfile.rb:89 msgid "Edit Profile - Choose profile to edit" msgstr "프로파일 편집 - 편집할 프로파일을 선택하십시오." -#. no command line support #269891 -#: src/clients/apparmor-settings.rb:52 +#. no command line support #269891 +#: src/clients/apparmor-settings.rb:52 msgid "Enable AppArmor Functions" msgstr "AppArmor 기능 활성화" -#. AppArmor dialog caption -#. Network dialog caption -#: src/clients/apparmor.rb:51 src/include/apparmor/aa-config.rb:440 +#. AppArmor dialog caption +#. Network dialog caption +#: src/clients/apparmor.rb:51 src/include/apparmor/aa-config.rb:440 msgid "AppArmor Configuration" msgstr "AppArmor 구성" -#. AppArmor dialog help -#: src/clients/apparmor.rb:54 +#. AppArmor dialog help +#: src/clients/apparmor.rb:54 msgid "" "<p>Choose one of the available AppArmor modules to configure\n" " the corresponding action and press <b>Launch</b>.</p>\n" @@ -93,185 +91,172 @@ "<p>사용 가능한 AppArmor 모듈 중 하나를 선택하여\n" " 해당 작업을 구성하고 <b>시작</b>을 누르십시오.</p>\n" -#. Selection box label -#: src/clients/apparmor.rb:69 +#. Selection box label +#: src/clients/apparmor.rb:69 msgid "&Available AppArmor Modules:" msgstr "사용 가능한 AppArmor 모듈(&A):" -#. Selection box items -#: src/clients/apparmor.rb:72 +#. Selection box items +#: src/clients/apparmor.rb:72 msgid "Settings" msgstr "설정" -#: src/clients/apparmor.rb:73 +#: src/clients/apparmor.rb:73 msgid "Manage Existing Profiles" msgstr "기존 프로파일 관리" -#: src/clients/apparmor.rb:74 +#: src/clients/apparmor.rb:74 msgid "Manually Add Profile" msgstr "프로파일 수동 추가" -#. Label::FinishButton() -#: src/clients/apparmor.rb:90 +#. Label::FinishButton() +#: src/clients/apparmor.rb:90 msgid "&Launch" msgstr "실행(&L)" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#: src/include/apparmor/aa-config.rb:52 -msgid "" -"This operation generated the following error. Check your installation and " -"AppArmor profile settings." -msgstr "" -"이 작업은 다음 오류를 생성했습니다. 설치 및 AppArmor 프로파일 설정을 확인하십" -"시오." +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#: src/include/apparmor/aa-config.rb:52 +msgid "This operation generated the following error. Check your installation and AppArmor profile settings." +msgstr "이 작업은 다음 오류를 생성했습니다. 설치 및 AppArmor 프로파일 설정을 확인하십시오." -#: src/include/apparmor/aa-config.rb:91 src/include/apparmor/aa-config.rb:103 -#: src/include/apparmor/aa-config.rb:115 +#: src/include/apparmor/aa-config.rb:91 src/include/apparmor/aa-config.rb:103 +#: src/include/apparmor/aa-config.rb:115 msgid "Disabled" msgstr "비활성화" -#: src/include/apparmor/aa-config.rb:92 src/include/apparmor/aa-config.rb:104 -#: src/include/apparmor/aa-config.rb:116 +#: src/include/apparmor/aa-config.rb:92 src/include/apparmor/aa-config.rb:104 +#: src/include/apparmor/aa-config.rb:116 msgid "1 minute" msgstr "1분" -#: src/include/apparmor/aa-config.rb:93 src/include/apparmor/aa-config.rb:105 -#: src/include/apparmor/aa-config.rb:117 +#: src/include/apparmor/aa-config.rb:93 src/include/apparmor/aa-config.rb:105 +#: src/include/apparmor/aa-config.rb:117 msgid "5 minutes" msgstr "5분" -#: src/include/apparmor/aa-config.rb:94 src/include/apparmor/aa-config.rb:106 -#: src/include/apparmor/aa-config.rb:118 +#: src/include/apparmor/aa-config.rb:94 src/include/apparmor/aa-config.rb:106 +#: src/include/apparmor/aa-config.rb:118 msgid "10 minutes" msgstr "10분" -#: src/include/apparmor/aa-config.rb:95 src/include/apparmor/aa-config.rb:107 -#: src/include/apparmor/aa-config.rb:119 +#: src/include/apparmor/aa-config.rb:95 src/include/apparmor/aa-config.rb:107 +#: src/include/apparmor/aa-config.rb:119 msgid "15 minutes" msgstr "15분" -#: src/include/apparmor/aa-config.rb:96 src/include/apparmor/aa-config.rb:108 -#: src/include/apparmor/aa-config.rb:120 +#: src/include/apparmor/aa-config.rb:96 src/include/apparmor/aa-config.rb:108 +#: src/include/apparmor/aa-config.rb:120 msgid "30 minutes" msgstr "30분" -#: src/include/apparmor/aa-config.rb:97 src/include/apparmor/aa-config.rb:109 -#: src/include/apparmor/aa-config.rb:121 +#: src/include/apparmor/aa-config.rb:97 src/include/apparmor/aa-config.rb:109 +#: src/include/apparmor/aa-config.rb:121 msgid "1 hour" msgstr "1시간" -#: src/include/apparmor/aa-config.rb:98 src/include/apparmor/aa-config.rb:110 -#: src/include/apparmor/aa-config.rb:122 +#: src/include/apparmor/aa-config.rb:98 src/include/apparmor/aa-config.rb:110 +#: src/include/apparmor/aa-config.rb:122 msgid "1 day" msgstr "1일" -#: src/include/apparmor/aa-config.rb:99 src/include/apparmor/aa-config.rb:111 -#: src/include/apparmor/aa-config.rb:123 +#: src/include/apparmor/aa-config.rb:99 src/include/apparmor/aa-config.rb:111 +#: src/include/apparmor/aa-config.rb:123 msgid "1 week" msgstr "1주" -#: src/include/apparmor/aa-config.rb:131 -#: src/include/apparmor/aa-config.rb:233 +#: src/include/apparmor/aa-config.rb:131 src/include/apparmor/aa-config.rb:233 msgid "Security Event Notification" msgstr "보안 이벤트 알림" -#: src/include/apparmor/aa-config.rb:138 +#: src/include/apparmor/aa-config.rb:138 msgid "Terse Notification" msgstr "간단한 알림" -#: src/include/apparmor/aa-config.rb:142 -#: src/include/apparmor/aa-config.rb:171 -#: src/include/apparmor/aa-config.rb:200 +#: src/include/apparmor/aa-config.rb:142 src/include/apparmor/aa-config.rb:171 +#: src/include/apparmor/aa-config.rb:200 msgid "Frequency" msgstr "주파수" -#: src/include/apparmor/aa-config.rb:145 -#: src/include/apparmor/aa-config.rb:174 -#: src/include/apparmor/aa-config.rb:203 +#: src/include/apparmor/aa-config.rb:145 src/include/apparmor/aa-config.rb:174 +#: src/include/apparmor/aa-config.rb:203 msgid "Email Address" msgstr "전자 메일 주소" -#: src/include/apparmor/aa-config.rb:150 -#: src/include/apparmor/aa-config.rb:179 -#: src/include/apparmor/aa-config.rb:208 +#: src/include/apparmor/aa-config.rb:150 src/include/apparmor/aa-config.rb:179 +#: src/include/apparmor/aa-config.rb:208 msgid "Severity" msgstr "심각도" -#: src/include/apparmor/aa-config.rb:159 -#: src/include/apparmor/aa-config.rb:188 -#: src/include/apparmor/aa-config.rb:217 +#: src/include/apparmor/aa-config.rb:159 src/include/apparmor/aa-config.rb:188 +#: src/include/apparmor/aa-config.rb:217 msgid "Include Unknown Severity Events" msgstr "알 수 없는 심각도 이벤트 포함" -#: src/include/apparmor/aa-config.rb:167 +#: src/include/apparmor/aa-config.rb:167 msgid "Summary Notification" msgstr "요약 알림" -#: src/include/apparmor/aa-config.rb:196 +#: src/include/apparmor/aa-config.rb:196 msgid "Verbose Notification" msgstr "자세한 알림" -#: src/include/apparmor/aa-config.rb:270 -#: src/include/apparmor/aa-config.rb:310 -#: src/include/apparmor/aa-config.rb:350 +#: src/include/apparmor/aa-config.rb:270 src/include/apparmor/aa-config.rb:310 +#: src/include/apparmor/aa-config.rb:350 msgid "An email address is required for each selected notification method." msgstr "선택된 알림 방식별로 전자 메일 주소가 필요합니다." -#: src/include/apparmor/aa-config.rb:394 +#: src/include/apparmor/aa-config.rb:394 msgid "Configuration failed for the following operations: " msgstr "다음 작업에 대한 구성에 실패했습니다." -#: src/include/apparmor/aa-config.rb:401 -#: src/include/apparmor/aa-config.rb:434 +#: src/include/apparmor/aa-config.rb:401 src/include/apparmor/aa-config.rb:434 msgid "Notification is enabled" msgstr "알림이 활성화됩니다." -#. Notification Status -#: src/include/apparmor/aa-config.rb:403 -#: src/include/apparmor/aa-config.rb:431 +#. Notification Status +#: src/include/apparmor/aa-config.rb:403 src/include/apparmor/aa-config.rb:431 msgid "Notification is disabled" msgstr "알림이 비활성화됩니다." -#. AppArmor Status -#: src/include/apparmor/aa-config.rb:422 +#. AppArmor Status +#: src/include/apparmor/aa-config.rb:422 msgid "AppArmor is disabled" msgstr "AppArmor이 비활성화됩니다." -#: src/include/apparmor/aa-config.rb:426 +#: src/include/apparmor/aa-config.rb:426 msgid "AppArmor is enabled" msgstr "AppArmor이 활성화됩니다." -#: src/include/apparmor/aa-config.rb:441 +#: src/include/apparmor/aa-config.rb:441 msgid "" -"<p><b>AppArmor Status</b><br>This reports whether the AppArmor policy " -"enforcement \n" +"<p><b>AppArmor Status</b><br>This reports whether the AppArmor policy enforcement \n" "module is loaded and functioning.</p>" msgstr "" "<p><b>AppArmor 상태</b><br>이 보고서는 AppArmor 정책 적용 모듈이 불러져\n" "작동하는지에 대해 보고합니다.</p>" -#: src/include/apparmor/aa-config.rb:444 +#: src/include/apparmor/aa-config.rb:444 msgid "" "<p><b>Security Event Notification</b><br>Configure this tool if you want \n" "to be notified by email when access violations have occurred.</p>" @@ -279,7 +264,7 @@ "<p><b>보안 이벤트 알림</b><br>액세스 위반이 발생할 때 전자 메일을 통해\n" "알림을 받으려면 이 도구를 설정하십시오.</p>" -#: src/include/apparmor/aa-config.rb:447 +#: src/include/apparmor/aa-config.rb:447 msgid "" "<p><b>Profile Modes</b><br>Use this tool to change the way that AppArmor \n" "uses individual profiles.</p>" @@ -287,296 +272,288 @@ "<p><b>프로파일 모드</b><br>이 도구를 사용하여 AppArmor가 사용하는\n" "개별 프로파일의 변경 방법을 정할 수 있습니다.</p>" -#: src/include/apparmor/aa-config.rb:462 +#: src/include/apparmor/aa-config.rb:462 msgid "&Enable AppArmor" msgstr "AppArmor 활성화(&E)" -#: src/include/apparmor/aa-config.rb:469 +#: src/include/apparmor/aa-config.rb:469 msgid "Configure AppArmor" msgstr "AppArmor 구성" -#. event notification disabled due to changes in AppArmor -#. `Frame ( _("Security Event Notification"), -#. `HBox( -#. `VSpacing(1), `HSpacing(1), -#. `HVCenter( `Label( `id(`notifyLabel), evEnStr )), -#. `PushButton( `id(`ntconf), _("C&onfigure")), -#. `VSpacing(1), `HSpacing(1) -#. ) -#. ), -#. `VSpacing(1), `HSpacing(20), -#: src/include/apparmor/aa-config.rb:485 +#. event notification disabled due to changes in AppArmor +#. `Frame ( _("Security Event Notification"), +#. `HBox( +#. `VSpacing(1), `HSpacing(1), +#. `HVCenter( `Label( `id(`notifyLabel), evEnStr )), +#. `PushButton( `id(`ntconf), _("C&onfigure")), +#. `VSpacing(1), `HSpacing(1) +#. ) +#. ), +#. `VSpacing(1), `HSpacing(20), +#: src/include/apparmor/aa-config.rb:485 msgid "Configure Profile Modes" msgstr "프로파일 모드 구성" -#: src/include/apparmor/aa-config.rb:491 +#: src/include/apparmor/aa-config.rb:491 msgid "Set profile modes" msgstr "프로파일 모드 설정" -#: src/include/apparmor/aa-config.rb:494 +#: src/include/apparmor/aa-config.rb:494 msgid "Co&nfigure" msgstr "구성(&N)" -#. May want to replace Wizard() with UI() -#: src/include/apparmor/aa-config.rb:518 -#: src/include/apparmor/config_complain.rb:187 -#: src/include/apparmor/config_complain.rb:235 -#: src/include/apparmor/config_complain.rb:245 -#: src/include/apparmor/config_complain.rb:274 -#: src/include/apparmor/config_complain.rb:293 -#: src/include/apparmor/profile_dialogs.rb:1112 +#. May want to replace Wizard() with UI() +#: src/include/apparmor/aa-config.rb:518 +#: src/include/apparmor/config_complain.rb:187 +#: src/include/apparmor/config_complain.rb:235 +#: src/include/apparmor/config_complain.rb:245 +#: src/include/apparmor/config_complain.rb:274 +#: src/include/apparmor/config_complain.rb:293 +#: src/include/apparmor/profile_dialogs.rb:1112 msgid "&Done" msgstr "완료(&D)" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#: src/include/apparmor/apparmor_profile_check.rb:49 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#: src/include/apparmor/apparmor_profile_check.rb:49 msgid "Errors found in AppArmor profiles" msgstr "AppArmor 프로파일에서 오류가 발견됨" -#: src/include/apparmor/apparmor_profile_check.rb:57 -msgid "" -"<p>These problems must be corrected before AppArmor can be started or the " -"profile management tools can be used.</p> " -msgstr "" -"<p>AppArmor를 실행하거나 프로파일 관리 도구를 사용하기 전에 먼저 이 문제를 해" -"결해야 합니다.</p> " +#: src/include/apparmor/apparmor_profile_check.rb:57 +msgid "<p>These problems must be corrected before AppArmor can be started or the profile management tools can be used.</p> " +msgstr "<p>AppArmor를 실행하거나 프로파일 관리 도구를 사용하기 전에 먼저 이 문제를 해결해야 합니다.</p> " -#: src/include/apparmor/apparmor_profile_check.rb:64 +#: src/include/apparmor/apparmor_profile_check.rb:64 msgid "<p>Find a description of the AppArmor profile syntax by running " msgstr "<p>다음을 실행하여 AppArmor 프로파일 구문에 대한 설명을 확인하십시오. " -#: src/include/apparmor/apparmor_profile_check.rb:70 -msgid "" -"<p>Comprehensive documentation about AppArmor is available in the " -"Administration guide located in the directory: " -msgstr "" -"<p>AppArmor에 대한 포괄적인 설명서는 다음 디렉토리에 있는 관리 가이드에서 사" -"용할 수 있습니다. " +#: src/include/apparmor/apparmor_profile_check.rb:70 +msgid "<p>Comprehensive documentation about AppArmor is available in the Administration guide located in the directory: " +msgstr "<p>AppArmor에 대한 포괄적인 설명서는 다음 디렉토리에 있는 관리 가이드에서 사용할 수 있습니다. " -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#: src/include/apparmor/apparmor_ycp_utils.rb:35 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#: src/include/apparmor/apparmor_ycp_utils.rb:35 msgid "&Allow" msgstr "허용(&A)" -#: src/include/apparmor/apparmor_ycp_utils.rb:36 +#: src/include/apparmor/apparmor_ycp_utils.rb:36 msgid "&Deny" msgstr "거부(&D)" -#: src/include/apparmor/apparmor_ycp_utils.rb:37 +#: src/include/apparmor/apparmor_ycp_utils.rb:37 msgid "Abo&rt" msgstr "중단(&R)" -#: src/include/apparmor/apparmor_ycp_utils.rb:39 +#: src/include/apparmor/apparmor_ycp_utils.rb:39 msgid "Audi&t" msgstr "감사(&T)" -#: src/include/apparmor/apparmor_ycp_utils.rb:40 +#: src/include/apparmor/apparmor_ycp_utils.rb:40 msgid "Audi&t off" msgstr "감사 해제(&T)" -#: src/include/apparmor/apparmor_ycp_utils.rb:41 +#: src/include/apparmor/apparmor_ycp_utils.rb:41 msgid "Audit &All" msgstr "모두 감사(&A)" -#: src/include/apparmor/apparmor_ycp_utils.rb:42 +#: src/include/apparmor/apparmor_ycp_utils.rb:42 msgid "&Opts" msgstr "옵션(&O)" -#: src/include/apparmor/apparmor_ycp_utils.rb:43 +#: src/include/apparmor/apparmor_ycp_utils.rb:43 msgid "&Owner Permissions on" msgstr "소유자 권한 켜기(&O)" -#: src/include/apparmor/apparmor_ycp_utils.rb:44 +#: src/include/apparmor/apparmor_ycp_utils.rb:44 msgid "&Owner Permissions off" msgstr "소유자 권한 끄기(&O)" -#: src/include/apparmor/apparmor_ycp_utils.rb:45 -#: src/include/apparmor/apparmor_ycp_utils.rb:63 +#: src/include/apparmor/apparmor_ycp_utils.rb:45 +#: src/include/apparmor/apparmor_ycp_utils.rb:63 msgid "&Inherit" msgstr "상속(&I)" -#: src/include/apparmor/apparmor_ycp_utils.rb:46 -#: src/include/apparmor/apparmor_ycp_utils.rb:64 +#: src/include/apparmor/apparmor_ycp_utils.rb:46 +#: src/include/apparmor/apparmor_ycp_utils.rb:64 msgid "&Profile" msgstr "프로파일(&P)" -#: src/include/apparmor/apparmor_ycp_utils.rb:47 +#: src/include/apparmor/apparmor_ycp_utils.rb:47 msgid "&Profile Clean Exec" msgstr "프로파일 정리 실행(&P)" -#: src/include/apparmor/apparmor_ycp_utils.rb:48 +#: src/include/apparmor/apparmor_ycp_utils.rb:48 msgid "&Child" msgstr "자식(&C)" -#: src/include/apparmor/apparmor_ycp_utils.rb:49 +#: src/include/apparmor/apparmor_ycp_utils.rb:49 msgid "&Child Clean Exec" msgstr "자식 정리 실행(&C)" -#: src/include/apparmor/apparmor_ycp_utils.rb:50 +#: src/include/apparmor/apparmor_ycp_utils.rb:50 msgid "&Name" msgstr "이름(&N)" -#: src/include/apparmor/apparmor_ycp_utils.rb:51 +#: src/include/apparmor/apparmor_ycp_utils.rb:51 msgid "&Named Clean Exec" msgstr "지정된 정리 실행(&N)" -#: src/include/apparmor/apparmor_ycp_utils.rb:52 -#: src/include/apparmor/apparmor_ycp_utils.rb:65 +#: src/include/apparmor/apparmor_ycp_utils.rb:52 +#: src/include/apparmor/apparmor_ycp_utils.rb:65 msgid "&Unconfined" msgstr "제한 취소(&U)" -#: src/include/apparmor/apparmor_ycp_utils.rb:53 +#: src/include/apparmor/apparmor_ycp_utils.rb:53 msgid "&Unconfined Clean Exec" msgstr "무제한 정리 실행(&U)" -#: src/include/apparmor/apparmor_ycp_utils.rb:54 +#: src/include/apparmor/apparmor_ycp_utils.rb:54 msgid "&Profile ix" msgstr "프로파일 상속 실행(&P)" -#: src/include/apparmor/apparmor_ycp_utils.rb:55 +#: src/include/apparmor/apparmor_ycp_utils.rb:55 msgid "&Profile ix Clean Exec" msgstr "프로파일 상속 실행 정리 실행(&P)" -#: src/include/apparmor/apparmor_ycp_utils.rb:56 +#: src/include/apparmor/apparmor_ycp_utils.rb:56 msgid "&Child ix" msgstr "자식 상속 실행(&C)" -#: src/include/apparmor/apparmor_ycp_utils.rb:57 +#: src/include/apparmor/apparmor_ycp_utils.rb:57 msgid "&Child ix Cx Clean Exec" msgstr "자식 상속 실행 정리 실행(&C)" -#: src/include/apparmor/apparmor_ycp_utils.rb:58 -#: src/include/apparmor/apparmor_ycp_utils.rb:59 +#: src/include/apparmor/apparmor_ycp_utils.rb:58 +#: src/include/apparmor/apparmor_ycp_utils.rb:59 msgid "&Name ix" msgstr "이름 상속 실행(&N)" -#: src/include/apparmor/apparmor_ycp_utils.rb:60 +#: src/include/apparmor/apparmor_ycp_utils.rb:60 msgid "i&x fallback on" msgstr "상속 실행 대체 설정(&X)" -#: src/include/apparmor/apparmor_ycp_utils.rb:61 +#: src/include/apparmor/apparmor_ycp_utils.rb:61 msgid "i&x fallback off" msgstr "상속 실행 대체 끔(&X)" -#: src/include/apparmor/apparmor_ycp_utils.rb:62 +#: src/include/apparmor/apparmor_ycp_utils.rb:62 msgid "&Continue Profiling" msgstr "프로파일 생성 계속(&C)" -#: src/include/apparmor/apparmor_ycp_utils.rb:66 +#: src/include/apparmor/apparmor_ycp_utils.rb:66 msgid "&Edit" msgstr "편집(&E)" -#: src/include/apparmor/apparmor_ycp_utils.rb:67 +#: src/include/apparmor/apparmor_ycp_utils.rb:67 msgid "&Glob" msgstr "광역(&G)" -#: src/include/apparmor/apparmor_ycp_utils.rb:68 +#: src/include/apparmor/apparmor_ycp_utils.rb:68 msgid "Glob w/E&xt" msgstr "광역 확장(&X)" -#: src/include/apparmor/apparmor_ycp_utils.rb:69 +#: src/include/apparmor/apparmor_ycp_utils.rb:69 msgid "&Add Requested Hat" msgstr "요청된 Hat 추가(&A)" -#: src/include/apparmor/apparmor_ycp_utils.rb:70 +#: src/include/apparmor/apparmor_ycp_utils.rb:70 msgid "&Use Default Hat" msgstr "기본 Hat 사용(&U)" -#: src/include/apparmor/apparmor_ycp_utils.rb:71 +#: src/include/apparmor/apparmor_ycp_utils.rb:71 msgid "&Scan system log for AppArmor events" msgstr "AppArmor 이벤트용 시스템 로그 스캔(&S)" -#: src/include/apparmor/apparmor_ycp_utils.rb:72 +#: src/include/apparmor/apparmor_ycp_utils.rb:72 msgid "&View Profile" msgstr "프로파일 보기(&V)" -#: src/include/apparmor/apparmor_ycp_utils.rb:73 +#: src/include/apparmor/apparmor_ycp_utils.rb:73 msgid "&Use Profile" msgstr "프로파일 사용(&U)" -#: src/include/apparmor/apparmor_ycp_utils.rb:74 +#: src/include/apparmor/apparmor_ycp_utils.rb:74 msgid "&Create New Profile" msgstr "새 프로파일 만들기(&C)" -#: src/include/apparmor/apparmor_ycp_utils.rb:75 +#: src/include/apparmor/apparmor_ycp_utils.rb:75 msgid "&Update Profile" msgstr "프로파일 업데이트(&U)" -#: src/include/apparmor/apparmor_ycp_utils.rb:76 +#: src/include/apparmor/apparmor_ycp_utils.rb:76 msgid "&Ignore Update" msgstr "업데이트 무시(&I)" -#: src/include/apparmor/apparmor_ycp_utils.rb:77 +#: src/include/apparmor/apparmor_ycp_utils.rb:77 msgid "&Save Changes" msgstr "변경사항 저장(&S)" -#: src/include/apparmor/apparmor_ycp_utils.rb:78 +#: src/include/apparmor/apparmor_ycp_utils.rb:78 msgid "&Upload Changes" msgstr "변경사항 업로드(&U)" -#: src/include/apparmor/apparmor_ycp_utils.rb:79 +#: src/include/apparmor/apparmor_ycp_utils.rb:79 msgid "&View Changes" msgstr "변경사항 보기(&V)" -#: src/include/apparmor/apparmor_ycp_utils.rb:80 +#: src/include/apparmor/apparmor_ycp_utils.rb:80 msgid "&Enable Repository" msgstr "리포지토리 활성화(&E)" -#: src/include/apparmor/apparmor_ycp_utils.rb:81 +#: src/include/apparmor/apparmor_ycp_utils.rb:81 msgid "&Disable Repository" msgstr "리포지토리 비활성화(&D)" -#: src/include/apparmor/apparmor_ycp_utils.rb:82 +#: src/include/apparmor/apparmor_ycp_utils.rb:82 msgid "&Never Ask Again" msgstr "다시 묻지 않음(&N)" -#: src/include/apparmor/apparmor_ycp_utils.rb:83 +#: src/include/apparmor/apparmor_ycp_utils.rb:83 msgid "Ask Me &Later" msgstr "나중에 다시 묻기(&L)" -#: src/include/apparmor/apparmor_ycp_utils.rb:106 +#: src/include/apparmor/apparmor_ycp_utils.rb:106 msgid "" "Email address format invalid.\n" "Email address must be less than 129 characters \n" @@ -588,209 +565,209 @@ " \"name@domain\" 형식이어야 합니다. \n" "유효한 주소를 입력하십시오.\n" -#. UI_RepositorySignInDialog -#. Dialog to allow users to signin or register with an external AppArmor -#. profile repository -#. -#. @param [Hash] agent_data - data from the backend -#. [ repo_url - string ] -#. @return answers - map that contains: -#. [ newuser => 1|0 - registering a new user? ] -#. [ user => username ] -#. [ pass => password ] -#. [ email => email address - if newuser = 1 ] -#. [ save_config => true/false - save this information on ] -#. [ the system ] -#. -#: src/include/apparmor/apparmor_ycp_utils.rb:141 +#. UI_RepositorySignInDialog +#. Dialog to allow users to signin or register with an external AppArmor +#. profile repository +#. +#. @param [Hash] agent_data - data from the backend +#. [ repo_url - string ] +#. @return answers - map that contains: +#. [ newuser => 1|0 - registering a new user? ] +#. [ user => username ] +#. [ pass => password ] +#. [ email => email address - if newuser = 1 ] +#. [ save_config => true/false - save this information on ] +#. [ the system ] +#. +#: src/include/apparmor/apparmor_ycp_utils.rb:141 msgid "AppArmor Profile Repository Setup" msgstr "AppArmor 프로파일 리포지토리 설정" -#: src/include/apparmor/apparmor_ycp_utils.rb:153 +#: src/include/apparmor/apparmor_ycp_utils.rb:153 msgid "Sign in to the repository" msgstr "리포지토리에 로그인" -#: src/include/apparmor/apparmor_ycp_utils.rb:157 +#: src/include/apparmor/apparmor_ycp_utils.rb:157 msgid "Username" msgstr "사용자 이름" -#: src/include/apparmor/apparmor_ycp_utils.rb:164 -#: src/include/apparmor/apparmor_ycp_utils.rb:200 +#: src/include/apparmor/apparmor_ycp_utils.rb:164 +#: src/include/apparmor/apparmor_ycp_utils.rb:200 msgid "S&ave configuration" msgstr "구성 저장(&A)" -#: src/include/apparmor/apparmor_ycp_utils.rb:167 +#: src/include/apparmor/apparmor_ycp_utils.rb:167 msgid "&Sign in" msgstr "로그인(&S)" -#: src/include/apparmor/apparmor_ycp_utils.rb:178 +#: src/include/apparmor/apparmor_ycp_utils.rb:178 msgid "&Register new user..." msgstr "새 사용자 등록(&R)..." -#: src/include/apparmor/apparmor_ycp_utils.rb:186 +#: src/include/apparmor/apparmor_ycp_utils.rb:186 msgid "Register New User" msgstr "새 사용자 등록 " -#: src/include/apparmor/apparmor_ycp_utils.rb:190 +#: src/include/apparmor/apparmor_ycp_utils.rb:190 msgid "Enter Username" msgstr "사용자 이름 입력" -#: src/include/apparmor/apparmor_ycp_utils.rb:191 +#: src/include/apparmor/apparmor_ycp_utils.rb:191 msgid "Enter Email Address" msgstr "전자 메일 주소 입력" -#: src/include/apparmor/apparmor_ycp_utils.rb:192 +#: src/include/apparmor/apparmor_ycp_utils.rb:192 msgid "Enter Password" msgstr "비밀번호 입력" -#: src/include/apparmor/apparmor_ycp_utils.rb:193 +#: src/include/apparmor/apparmor_ycp_utils.rb:193 msgid "Verify Password" msgstr "비밀번호 확인" -#: src/include/apparmor/apparmor_ycp_utils.rb:202 +#: src/include/apparmor/apparmor_ycp_utils.rb:202 msgid "&Register" msgstr "등록(&R)" -#: src/include/apparmor/apparmor_ycp_utils.rb:213 +#: src/include/apparmor/apparmor_ycp_utils.rb:213 msgid "&Sign in as existing user..." msgstr "기존 사용자로 로그인(&S)..." -#: src/include/apparmor/apparmor_ycp_utils.rb:249 +#: src/include/apparmor/apparmor_ycp_utils.rb:249 msgid "Username is required" msgstr "사용자 이름은 필수입니다. " -#: src/include/apparmor/apparmor_ycp_utils.rb:251 +#: src/include/apparmor/apparmor_ycp_utils.rb:251 msgid "Password is required" msgstr "비밀번호는 필수입니다." -#: src/include/apparmor/apparmor_ycp_utils.rb:290 +#: src/include/apparmor/apparmor_ycp_utils.rb:290 msgid "Username required for registration." msgstr "등록을 위해 사용자 이름이 필요합니다." -#: src/include/apparmor/apparmor_ycp_utils.rb:292 +#: src/include/apparmor/apparmor_ycp_utils.rb:292 msgid "Email address required for registration." msgstr "등록을 위해 전자 메일 주소가 필요합니다." -#: src/include/apparmor/apparmor_ycp_utils.rb:294 +#: src/include/apparmor/apparmor_ycp_utils.rb:294 msgid "Password is required for registration." msgstr "등록을 위해 비밀번호가 필요합니다." -#: src/include/apparmor/apparmor_ycp_utils.rb:296 +#: src/include/apparmor/apparmor_ycp_utils.rb:296 msgid "Passwords do not match. Please re-enter." msgstr "비밀번호가 일치하지 않습니다. 다시 입력하십시오." -#. UI_RepositoryViewProfile -#. Dialog to allow users to view a profile from the repository -#. and display it in a small scrollable dialog -#. -#. @param [Hash] agent_data - map data from the backend -#. [ user => string ] -#. [ profile => string contiaining profile contents ] -#. [ profile_type => string INACTIVE_LOCAL|REPOSITORY ] -#. -#. @return [void] -#. -#: src/include/apparmor/apparmor_ycp_utils.rb:373 +#. UI_RepositoryViewProfile +#. Dialog to allow users to view a profile from the repository +#. and display it in a small scrollable dialog +#. +#. @param [Hash] agent_data - map data from the backend +#. [ user => string ] +#. [ profile => string contiaining profile contents ] +#. [ profile_type => string INACTIVE_LOCAL|REPOSITORY ] +#. +#. @return [void] +#. +#: src/include/apparmor/apparmor_ycp_utils.rb:373 msgid "Local inactive profile" msgstr "로컬 비활성 프로파일" -#: src/include/apparmor/apparmor_ycp_utils.rb:375 +#: src/include/apparmor/apparmor_ycp_utils.rb:375 msgid "Profile created by user " msgstr "사용자가 생성한 프로파일" -#: src/include/apparmor/apparmor_ycp_utils.rb:377 +#: src/include/apparmor/apparmor_ycp_utils.rb:377 msgid "Local profile" msgstr "로컬 프로파일" -#. UI_ChangeLog_Dialog -#. Takes a list of profiles and collects one or multiple changelog entries -#. and returns them -#. -#. @param [Hash] agent_data - data from the backend -#. [ profiles - list of profile names ] -#. -#. @return results - map -#. [ STATUS - string - ok/cancel ] -#. [ SINGLE_CHANGELOG - string - set with changelog if user ] -#. [ selects a single changelog ] -#. -#. [ profile 1 name - string - changelog 1 ] -#. [ profile 2 name - string - changelog 2 ] -#. ... -#. [ profile n name - string - changelog n ] -#. -#: src/include/apparmor/apparmor_ycp_utils.rb:449 +#. UI_ChangeLog_Dialog +#. Takes a list of profiles and collects one or multiple changelog entries +#. and returns them +#. +#. @param [Hash] agent_data - data from the backend +#. [ profiles - list of profile names ] +#. +#. @return results - map +#. [ STATUS - string - ok/cancel ] +#. [ SINGLE_CHANGELOG - string - set with changelog if user ] +#. [ selects a single changelog ] +#. +#. [ profile 1 name - string - changelog 1 ] +#. [ profile 2 name - string - changelog 2 ] +#. ... +#. [ profile n name - string - changelog n ] +#. +#: src/include/apparmor/apparmor_ycp_utils.rb:449 msgid "Enter a changelog for the changes for " msgstr "두 번째 프로파일에 대한 변경사항의 changelog를" -#: src/include/apparmor/apparmor_ycp_utils.rb:450 +#: src/include/apparmor/apparmor_ycp_utils.rb:450 msgid " the selected profiles" msgstr " 입력하십시오." -#: src/include/apparmor/apparmor_ycp_utils.rb:451 +#: src/include/apparmor/apparmor_ycp_utils.rb:451 msgid "Individual changelogs per profile" msgstr "프로파일당 개별 changelog 수" -#. UI_MultiProfileSelectionDialog -#. Two pane dialog with a multi-selection box on the left -#. and a long text on the right. Allows a list of profiles -#. or profile changes to be viewed and selected for further -#. processing - for example uploading to the repository -#. -#. @param [Hash] agent_data - map - data from backend -#. [ title - string - explanation of the forms use ] -#. [ get_changelog - string true/false - prompt user to ] -#. [ supply changelogs ] -#. [ never_ask_again - string true/false - add widget to let ] -#. [ user select to never prompt again to ] -#. [ upload unselected profiles to the ] -#. [ repository ] -#. [ default_select - string true/false - default value for ] -#. [ profile selection ] -#. [ profiles - map ] -#. -#. @return results - map -#. [ STATUS - string - ok/cancel ] -#. [ PROFILES - list[string] - list of selected profiles ] -#. [ NEVER_ASK_AGAIN - string - true/false - mark unselected ] -#. [ profiles as local only and don't prompt ] -#. [ to upload ] -#. [ CHANGELOG - map[string,string] - changelog data from ] -#. [ UI_ChangeLog_Dialog() ] -#. -#: src/include/apparmor/apparmor_ycp_utils.rb:600 +#. UI_MultiProfileSelectionDialog +#. Two pane dialog with a multi-selection box on the left +#. and a long text on the right. Allows a list of profiles +#. or profile changes to be viewed and selected for further +#. processing - for example uploading to the repository +#. +#. @param [Hash] agent_data - map - data from backend +#. [ title - string - explanation of the forms use ] +#. [ get_changelog - string true/false - prompt user to ] +#. [ supply changelogs ] +#. [ never_ask_again - string true/false - add widget to let ] +#. [ user select to never prompt again to ] +#. [ upload unselected profiles to the ] +#. [ repository ] +#. [ default_select - string true/false - default value for ] +#. [ profile selection ] +#. [ profiles - map ] +#. +#. @return results - map +#. [ STATUS - string - ok/cancel ] +#. [ PROFILES - list[string] - list of selected profiles ] +#. [ NEVER_ASK_AGAIN - string - true/false - mark unselected ] +#. [ profiles as local only and don't prompt ] +#. [ to upload ] +#. [ CHANGELOG - map[string,string] - changelog data from ] +#. [ UI_ChangeLog_Dialog() ] +#. +#: src/include/apparmor/apparmor_ycp_utils.rb:600 msgid "&Do not ask again for unselected profiles" msgstr "선택하지 않은 프로파일에 대해 다시 요청 안 함(&D)" -#: src/include/apparmor/apparmor_ycp_utils.rb:671 +#: src/include/apparmor/apparmor_ycp_utils.rb:671 msgid "Profiles" msgstr "프로파일" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#. -#. YCP map containing definitons for Capabiltiies -#: src/include/apparmor/capabilities.rb:35 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#. +#. YCP map containing definitons for Capabiltiies +#: src/include/apparmor/capabilities.rb:35 msgid "" "<ul><li>In a system with the [_POSIX_CHOWN_RESTRICTED] option defined, \n" "this overrides the restriction of changing file ownership \n" @@ -799,31 +776,27 @@ "<ul><li>시스템에 [_POSIX_CHOWN_RESTRICTED] 옵션이 설정되어 있으면\n" "파일 소유권 및 그룹 소유권 변경 제한보다 이쪽을 우선시 합니다.</li></ul>" -#: src/include/apparmor/capabilities.rb:43 +#: src/include/apparmor/capabilities.rb:43 msgid "" "<ul><li>Override all DAC access, including ACL execute access if \n" -"[_POSIX_ACL] is defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE." -"</li></ul>" +"[_POSIX_ACL] is defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE.</li></ul>" msgstr "" "<ul><li>[_POSIX_ACL]이 정의되어 있으면 ACL 실행 액세스 권한을\n" -"포함한 모든 DAC 액세스 권한을 무효화합니다. DAC 액세스 권한 제외는 " -"CAP_LINUX_IMMUTABLE에 의해 적용됩니다.</li></ul>" +"포함한 모든 DAC 액세스 권한을 무효화합니다. DAC 액세스 권한 제외는 CAP_LINUX_IMMUTABLE에 의해 적용됩니다.</li></ul>" -#: src/include/apparmor/capabilities.rb:49 +#: src/include/apparmor/capabilities.rb:49 msgid "" "<ul><li>Overrides all DAC restrictions regarding read and search \n" -"on files and directories, including ACL restrictions if [_POSIX_ACL] is " -"defined. \n" +"on files and directories, including ACL restrictions if [_POSIX_ACL] is defined. \n" "Excluding DAC access covered by CAP_LINUX_IMMUTABLE. </li></ul>" msgstr "" "<ul><li>[_POSIX_ACL]이 정의되어 있으면 ACL 제한을 포함해\n" "파일 및 디렉토리에서의 읽기/검색과 관련된 모든 DAC 제한보다 우선시합니다.\n" "DAC 액세스 권한은 CAP_LINUX_IMMUTABLE에 포함된 경우는 제외됩니다. </li></ul>" -#: src/include/apparmor/capabilities.rb:57 +#: src/include/apparmor/capabilities.rb:57 msgid "" -"<ul><li>Overrides all restrictions on allowed operations on files, where " -"file\n" +"<ul><li>Overrides all restrictions on allowed operations on files, where file\n" "owner ID must be equal to the user ID, except where CAP_FSETID is\n" "applicable. It does not override MAC and DAC restrictions. </li></ul>" msgstr "" @@ -831,34 +804,21 @@ "사용자 ID와 같아야 하는 허용된 파일 작업에 대한 모든 제한을\n" "무효화합니다. MAC 및 DAC 제한을 무효화하지 않습니다. </li></ul>" -#: src/include/apparmor/capabilities.rb:65 -msgid "" -"<ul><li>Overrides the following restrictions: user ID must match the file " -"owner ID when setting the S_ISUID and S_ISGID bits on that file; the " -"effective group ID (or one of the supplementary group IDs) must match the " -"file owner ID when setting the S_ISGID bit on that file; the S_ISUID and " -"S_ISGID bits are cleared on successful return from chown(2) (not " -"implemented). </li></ul>" -msgstr "" -"<ul><li>다음 제한을 무효화합니다. 해당 파일에서 S_ISUID 및 S_ISGID 비트를 설" -"정하는 경우 사용자 ID가 파일 소유자 ID와 일치해야 합니다. 해당 파일에서 " -"S_ISGID 비트를 설정할 때 유효 그룹 ID(또는 보충 그룹 ID 중 하나)는 파일 소유" -"자 ID와 일치해야 합니다. chown(2)에서 성공적으로 반환되면 S_ISUID 및 S_ISGID " -"비트가 지워집니다(구현되지 않음). </li></ul>" +#: src/include/apparmor/capabilities.rb:65 +msgid "<ul><li>Overrides the following restrictions: user ID must match the file owner ID when setting the S_ISUID and S_ISGID bits on that file; the effective group ID (or one of the supplementary group IDs) must match the file owner ID when setting the S_ISGID bit on that file; the S_ISUID and S_ISGID bits are cleared on successful return from chown(2) (not implemented). </li></ul>" +msgstr "<ul><li>다음 제한을 무효화합니다. 해당 파일에서 S_ISUID 및 S_ISGID 비트를 설정하는 경우 사용자 ID가 파일 소유자 ID와 일치해야 합니다. 해당 파일에서 S_ISGID 비트를 설정할 때 유효 그룹 ID(또는 보충 그룹 ID 중 하나)는 파일 소유자 ID와 일치해야 합니다. chown(2)에서 성공적으로 반환되면 S_ISUID 및 S_ISGID 비트가 지워집니다(구현되지 않음). </li></ul>" -#: src/include/apparmor/capabilities.rb:71 +#: src/include/apparmor/capabilities.rb:71 msgid "" "<ul><li>Overrides the restriction that the real or effective user ID \n" -"of a process sending a signal must match the real or effective user ID of " -"the process \n" +"of a process sending a signal must match the real or effective user ID of the process \n" "receiving the signal.</li></ul>" msgstr "" "<ul><li>신호를 보내는 실제 또는 유효 사용자 ID가 신호를\n" -"수신하는 실제 또는 유효 사용자 ID와 일치해야 한다는 제한 사항을 무효화합니" -"다.\n" +"수신하는 실제 또는 유효 사용자 ID와 일치해야 한다는 제한 사항을 무효화합니다.\n" "</li></ul>" -#: src/include/apparmor/capabilities.rb:79 +#: src/include/apparmor/capabilities.rb:79 msgid "" "<ul><li>Allows setgid(2) manipulation </li> <li> Allows setgroups(2) </li> \n" "<li> Allows forged gids on socket credentials passing. </li></ul>" @@ -866,7 +826,7 @@ "<ul><li>setgid(2) 조작 허용 </li> <li> setgroups(2) 허용</li>\n" "<li>소켓 자격 정보 전달에서 위장된 gids를 허용합니다. </li></ul>" -#: src/include/apparmor/capabilities.rb:85 +#: src/include/apparmor/capabilities.rb:85 msgid "" "<ul><li>Allows setuid(2) manipulation (including fsuid) </li> \n" "<li> Allows forged pids on socket credentials passing. </li></ul>" @@ -874,7 +834,7 @@ "<ul><li>setuid(2) 조작 허용(fsuid 포함) </li>\n" "<li>소켓 자격 정보 전달에서 위장된 pids를 허용합니다. </li></ul>" -#: src/include/apparmor/capabilities.rb:91 +#: src/include/apparmor/capabilities.rb:91 msgid "" "<ul><li> Transfer any capability in your permitted set to any pid, \n" "remove any capability in your permitted set from any pid</li></ul>" @@ -882,13 +842,11 @@ "<ul><li> 임의의 pid로 사용자의 허용된 설정에서의\n" "임의의 기능을 전송하고 제거합니다.</li></ul>" -#: src/include/apparmor/capabilities.rb:97 -msgid "" -"<ul><li>Allows modification of S_IMMUTABLE and S_APPEND file attributes</ul>" +#: src/include/apparmor/capabilities.rb:97 +msgid "<ul><li>Allows modification of S_IMMUTABLE and S_APPEND file attributes</li></ul>" msgstr "<ul><li>S_IMMUTABLE 및 S_APPEND 파일 특성 수정 허용</li></ul>" -#: src/include/apparmor/capabilities.rb:103 +#: src/include/apparmor/capabilities.rb:103 msgid "" "<ul><li>Allows binding to TCP/UDP sockets below 1024 </li> \n" "<li> Allows binding to ATM VCIs below 32</li></ul>" @@ -896,15 +854,14 @@ "<ul><li>1024 미만의 TCP/UDP 소켓에 바인딩 허용 </li>\n" "<li>32 미만의 ATM VCIs 바인딩 허용</li></ul>" -#: src/include/apparmor/capabilities.rb:109 +#: src/include/apparmor/capabilities.rb:109 msgid "<ul><li> Allows broadcasting, listen to multicast </li></ul>" msgstr "<ul><li> 브로드캐스트 및 멀티캐스트 청취 허용</li></ul>" -#: src/include/apparmor/capabilities.rb:115 +#: src/include/apparmor/capabilities.rb:115 msgid "" "<ul><li> Allows interface configuration</li> \n" -"<li> Allows administration of IP firewall, masquerading and accounting \n" +"<li> Allows administration of IP firewall, masquerading and accounting</li> \n" "<li> Allows setting debug option on sockets</li> \n" "<li> Allows modification of routing tables</li>" msgstr "" @@ -913,10 +870,9 @@ "<li> 소켓에서 디버그 옵션 설정 허용</li> \n" "<li> 라우팅 테이블 수정 허용</li>" -#: src/include/apparmor/capabilities.rb:121 +#: src/include/apparmor/capabilities.rb:121 msgid "" -"<li> Allows setting arbitrary process / process group ownership on sockets \n" +"<li> Allows setting arbitrary process / process group ownership on sockets</li> \n" "<li> Allows binding to any address for transparent proxying</li> \n" "<li> Allows setting TOS (type of service)</li> \n" "<li> Allows setting promiscuous mode</li> \n" @@ -928,7 +884,7 @@ "<li> 무차별 모드 설정 허용</li> \n" "<li> 드라이버 통계 지우기 허용</li>" -#: src/include/apparmor/capabilities.rb:128 +#: src/include/apparmor/capabilities.rb:128 msgid "" "<li> Allows multicasting</li> \n" "<li> Allows read/write of device-specific registers</li> \n" @@ -940,7 +896,7 @@ "<li> ATM 제어 소켓 활성화 허용 </li>\n" "</ul>" -#: src/include/apparmor/capabilities.rb:137 +#: src/include/apparmor/capabilities.rb:137 msgid "" "<ul><li> Allows use of RAW sockets</li> \n" "<li> Allows use of PACKET sockets </li></ul>" @@ -948,29 +904,27 @@ "<ul><li> RAW 소켓 사용 허용</li> \n" "<li> PACKET 소켓 사용 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:143 +#: src/include/apparmor/capabilities.rb:143 msgid "" -"<ul><li> Allows locking of shared memory segments</li> <li> Allows mlock " -"and\n" +"<ul><li> Allows locking of shared memory segments</li> <li> Allows mlock and\n" "mlockall (which does not really have anything to do with IPC) </li></ul>" msgstr "" "<ul><li> 공유 메모리 세그먼트 잠금 허용</li> <li> mlock 및\n" "mlockall 허용(IPC와 관련해서 수행할 작업이 없음) </li></ul>" -#: src/include/apparmor/capabilities.rb:149 +#: src/include/apparmor/capabilities.rb:149 msgid "<ul><li> Override IPC ownership checks </li></ul>" msgstr "<ul><li> IPC 소유권 검사 무효화 </li></ul>" -#: src/include/apparmor/capabilities.rb:153 +#: src/include/apparmor/capabilities.rb:153 msgid "" -"<ul><li> Insert and remove kernel modules - modify kernel without limit \n" +"<ul><li> Insert and remove kernel modules - modify kernel without limit</li> \n" "<li> Modify cap_bset </li></ul>" msgstr "" "<ul><li>커널 모듈 삽입 및 제거 - 제한 없이 커널 수정</li> \n" "<li>cap_bset 수정</li></ul>" -#: src/include/apparmor/capabilities.rb:159 +#: src/include/apparmor/capabilities.rb:159 msgid "" "<ul><li> Allows ioperm/iopl access</li> \n" "<li> Allows sending USB messages to any device via /proc/bus/usb </li></ul>" @@ -978,19 +932,19 @@ "<ul><li> ioperm/iopl 액세스 허용</li> \n" "<li> /proc/bus/usb를 통해 USB 메시지를 장치로 보내기 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:165 +#: src/include/apparmor/capabilities.rb:165 msgid "<ul><li> Allows use of chroot() </li></ul>" msgstr "<ul><li> chroot() 사용 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:169 +#: src/include/apparmor/capabilities.rb:169 msgid "<ul><li> Allows ptrace() of any process </li></ul>" msgstr "<ul><li> 임의 프로세스의 ptrace() 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:173 +#: src/include/apparmor/capabilities.rb:173 msgid "<ul><li> Allows configuration of process accounting </li></ul>" msgstr "<ul><li> 프로세스 계정 구성 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:179 +#: src/include/apparmor/capabilities.rb:179 msgid "" "<ul><li> Allows configuration of the secure attention key</li> \n" "<li> Allows administration of the random device</li> \n" @@ -1002,7 +956,7 @@ "<li> 디스크 할당량 검사 및 구성 허용</li> \n" "<li> 커널의 syslog 구성 허용(printk 동작)</li>" -#: src/include/apparmor/capabilities.rb:185 +#: src/include/apparmor/capabilities.rb:185 msgid "" "<li> Allows setting the domain name</li> \n" "<li> Allows setting the hostname</li> \n" @@ -1016,7 +970,7 @@ "<li> 새 smb 연결을 설정하여 mount() 및 umount() 허용</li> \n" "<li> autofs root ioctls 허용</li>" -#: src/include/apparmor/capabilities.rb:192 +#: src/include/apparmor/capabilities.rb:192 msgid "" "<li> Allows nfsservctl</li> \n" "<li> Allows VM86_REQUEST_IRQ</li> \n" @@ -1030,36 +984,33 @@ "<li> mips(setstacksize)에서 irix_prctl 허용</li> \n" "<li> m68k(sys_cacheflush)에서 모든 캐시 플러시 허용</li>" -#: src/include/apparmor/capabilities.rb:199 +#: src/include/apparmor/capabilities.rb:199 msgid "" "<li> Allows removing semaphores</li> \n" -"<li> Used instead of CAP_CHOWN to \"chown\" IPC message queues, semaphores " -"and shared memory</li> \n" +"<li> Used instead of CAP_CHOWN to \"chown\" IPC message queues, semaphores and shared memory</li> \n" "<li> Allows locking/unlocking of shared memory segment</li> \n" "<li> Allows turning swap on/off</li> \n" "<li> Allows forged pids on socket credentials passing</li>" msgstr "" "<li> 세마포 제거 허용</li> \n" -"<li> CAP_CHOWN 대신 IPC 메시지 대기열, 세마포 및 공유 메모리를 \"chown\"하는 " -"데 사용됨</li> \n" +"<li> CAP_CHOWN 대신 IPC 메시지 대기열, 세마포 및 공유 메모리를 \"chown\"하는 데 사용됨</li> \n" "<li> 공유 메모리 세그먼트 잠금/잠금 해제 허용</li> \n" "<li> 스왑 켜기/끄기 허용</li> \n" "<li> 소켓 자격 증명 전달 시 위조된 pid 허용</li>" -#: src/include/apparmor/capabilities.rb:206 +#: src/include/apparmor/capabilities.rb:206 msgid "" "<li> Allows setting read ahead and flushing buffers on block devices</li> \n" "<li> Allows setting geometry in floppy driver</li> \n" "<li> Allows turning DMA on/off in xd driver</li> \n" -"<li> Allows administration of md devices (mostly the above, but some extra " -"ioctls)</li>" +"<li> Allows administration of md devices (mostly the above, but some extra ioctls)</li>" msgstr "" "<li> 블록 장치에서 읽기 미리 설정 및 버퍼 플러시 허용</li> \n" "<li> 플로피 드라이버에서 기하 도형 설정 허용</li> \n" "<li> xd 드라이버에서 DMA 켜기/끄기 허용</li> \n" "<li> md 장치 관리 허용(대체로 위와 같음, 추가 ioctls)</li>" -#: src/include/apparmor/capabilities.rb:212 +#: src/include/apparmor/capabilities.rb:212 msgid "" "<li> Allows tuning the ide driver</li> \n" "<li> Allows access to the nvram device</li> \n" @@ -1071,10 +1022,9 @@ "<li> apm_bios, 직렬 및 bttv(TV) 장치 관리 허용</li> \n" "<li> iaan CAPI 지원 드라이버에서 제조업체 명령 허용</li>" -#: src/include/apparmor/capabilities.rb:218 +#: src/include/apparmor/capabilities.rb:218 msgid "" -"<li> Allows reading non-standardized portions of pci configuration space \n" +"<li> Allows reading non-standardized portions of pci configuration space</li> \n" "<li> Allows DDI debug ioctl on sbpcd driver</li> \n" "<li> Allows setting up serial ports</li> \n" "<li> Allows sending raw qic-117 commands</li>" @@ -1084,7 +1034,7 @@ "<li> 직렬 포트 설정 허용</li> \n" "<li> 원시 qic-117 명령 보내기 허용</li>" -#: src/include/apparmor/capabilities.rb:224 +#: src/include/apparmor/capabilities.rb:224 msgid "" "<li> Allows enabling/disabling tagged queuing on SCSI controllers\n" " and sending arbitrary SCSI commands</li> \n" @@ -1094,55 +1044,49 @@ " 및 임의 SCSI 명령 보내기 허용</li> \n" "<li> 루프백 파일 시스템에서 암호화 키 설정 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:232 +#: src/include/apparmor/capabilities.rb:232 msgid "<ul><li> Allows use of reboot() </li></ul>" msgstr "<ul><li> reboot() 사용 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:236 +#: src/include/apparmor/capabilities.rb:236 msgid "" -"<ul><li> Allows raising priority and setting priority on other (different " -"UID) processes</li> \n" -"<li> Allows use of FIFO and round-robin (realtime) scheduling on own " -"processes and setting \n" +"<ul><li> Allows raising priority and setting priority on other (different UID) processes</li> \n" +"<li> Allows use of FIFO and round-robin (realtime) scheduling on own processes and setting \n" "the scheduling algorithm used by another process.</li> \n" "<li> Allows setting cpu affinity on other processes </li></ul>" msgstr "" -"<ul><li> 다른(다른 UID) 프로세스에서 우선순위 올리기 및 우선순위 설정 허용 \n" +"<ul><li> 다른(다른 UID) 프로세스에서 우선순위 올리기 및 우선순위 설정 허용</li> \n" "<li> 고유한 프로세스에서 FIFO 및 라운드 로빈(실시간) 스케줄링 및 \n" "다른 프로세스에서 사용되는 스케줄링 알고리즘 설정 허용</li> \n" "<li> 다른 프로세스에서 cpu 선호도 설정 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:245 +#: src/include/apparmor/capabilities.rb:245 msgid "" "<ul><li> Override resource limits. Set resource limits.</li> \n" "<li> Override quota limits.</li> \n" "<li> Override reserved space on ext2 filesystem</li> \n" -"<li> Modify data journaling mode on ext3 filesystem (uses journaling " -"resources)</li>" +"<li> Modify data journaling mode on ext3 filesystem (uses journaling resources)</li>" msgstr "" "<ul><li> 리소스 제한을 덮어쓰기 합니다. 리소스 제한을 지정합니다.</li> \n" "<li> 용량 제한을 덮어쓰기 합니다.</li> \n" "<li> ext2 파일 시스템의 예약 영역을 덮어쓰기</li> \n" "<li> ext3 파일 시스템의 데이터 저널링 모드를 수정(저널링 리소스 사용)</li>" -#: src/include/apparmor/capabilities.rb:251 +#: src/include/apparmor/capabilities.rb:251 msgid "" -"<li> NOTE: ext2 honors fsuid when checking for resource overrides, so you " -"can override using fsuid too</li> \n" +"<li> NOTE: ext2 honors fsuid when checking for resource overrides, so you can override using fsuid too</li> \n" "<li> Override size restrictions on IPC message queues</li> \n" "<li> Allows more than 64hz interrupts from the real-time clock</li> \n" "<li> Override max number of consoles on console allocation</li> \n" "<li> Override max number of keymaps </li></ul>" msgstr "" -"<li> 참고: ext2는 리소스 무효화를 확인할 때 fsuid를 사용하므로 fsuid 사용도 " -"무효화할 수 있습니다.</li> \n" +"<li> 참고: ext2는 리소스 무효화를 확인할 때 fsuid를 사용하므로 fsuid 사용도 무효화할 수 있습니다.</li> \n" "<li> IPC 메시지 대기열의 크기 제한 무효화</li> \n" "<li> 실시간 클럭에서 64hz 이상의 인터럽트 허용</li> \n" "<li> 콘솔 할당 시 최대 콘솔 수 무효화</li> \n" "<li> 최대 keymap 수 무효화 </li></ul>" -#: src/include/apparmor/capabilities.rb:261 +#: src/include/apparmor/capabilities.rb:261 msgid "" "<ul><li> Allows manipulation of system clock</li> \n" "<li> Allows irix_stime on mips</li> \n" @@ -1152,7 +1096,7 @@ "<li> mips의 irix_stime 허용</li> \n" "<li> 실시간 클럭 설정 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:269 +#: src/include/apparmor/capabilities.rb:269 msgid "" "<ul><li> Allows configuration of tty devices</li> \n" "<li> Allows vhangup() of tty </li></ul>" @@ -1160,37 +1104,37 @@ "<ul><li> tty 장치 구성 허용</li> \n" "<li> tty의 vhangup() 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:275 +#: src/include/apparmor/capabilities.rb:275 msgid "<ul><li> Allows the privileged aspects of mknod() </li></ul>" msgstr "<ul><li> mknod()의 권한 있는 기능 허용 </li></ul>" -#: src/include/apparmor/capabilities.rb:281 +#: src/include/apparmor/capabilities.rb:281 msgid "<ul><li> Allows taking of leases on files </li></ul>" msgstr "<ul><li> 파일에서 임대 허용 </li></ul>" -#. encoding: utf-8 -#. *************************************************************************** -#. -#. Copyright (c) 2002 - 2012 Novell, Inc. -#. All Rights Reserved. -#. -#. This program is free software; you can redistribute it and/or -#. modify it under the terms of version 2 of the GNU General Public License as -#. published by the Free Software Foundation. -#. -#. This program is distributed in the hope that it will be useful, -#. but WITHOUT ANY WARRANTY; without even the implied warranty of -#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -#. GNU General Public License for more details. -#. -#. You should have received a copy of the GNU General Public License -#. along with this program; if not, contact Novell, Inc. -#. -#. To contact Novell about this file by physical or electronic mail, -#. you may find current contact information at www.novell.com -#. -#. *************************************************************************** -#: src/include/apparmor/config_complain.rb:34 +#. encoding: utf-8 +#. *************************************************************************** +#. +#. Copyright (c) 2002 - 2012 Novell, Inc. +#. All Rights Reserved. +#. +#. This program is free software; you can redistribute it and/or +#. modify it under the terms of version 2 of the GNU General Public License as +#. published by the Free Software Foundation. +#. +#. This program is distributed in the hope that it will be useful, +#. but WITHOUT ANY WARRANTY; without even the implied warranty of +#. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +#. GNU General Public License for more details. +#. +#. You should have received a copy of the GNU General Public License +#. along with this program; if not, contact Novell, Inc. +#. +#. To contact Novell about this file by physical or electronic mail, +#. you may find current contact information at www.novell.com +#. +#. *************************************************************************** +#: src/include/apparmor/config_complain.rb:34 msgid "" "<p><b>Profile Mode Configuration</b><br>This tool allows \n" "you to set AppArmor profiles to either complain or enforce mode.</p>" @@ -1198,7 +1142,7 @@ "<p><b>프로파일 모드 구성</b><br>이 도구로 AppArmor\n" "프로파일에 대해 컴플레인 또는 강제 모드 둘 다 설정할 수 있습니다.</p>" -#: src/include/apparmor/config_complain.rb:37 +#: src/include/apparmor/config_complain.rb:37 msgid "" "<p><b>Complain mode</b> is a profile training state that logs application \n" "activity. All the violations of the AppArmor profile rules are logged \n" @@ -1210,7 +1154,7 @@ "사항이 기록(<i>/var/log/audit/감사.log</i> 파일에)되지만\n" "허용되고 있는 상태이기 때문에 응용 프로그램의 동작은 제한 되지 않습니다.</p>" -#: src/include/apparmor/config_complain.rb:43 +#: src/include/apparmor/config_complain.rb:43 msgid "" "<p>With the profile in <b>enforce mode</b>, application is protected by \n" "AppArmor. The profile rules are enforced and their violation is logged,\n" @@ -1222,85 +1166,85 @@ "허용되지는 않습니다.(예를 들어, 프로파일로 허용되지 않는 한\n" "응용 프로그램은 파일에 액세스할 수 없습니다.)</p>" -#. Button for showing active or all profiles -#: src/include/apparmor/config_complain.rb:63 +#. Button for showing active or all profiles +#: src/include/apparmor/config_complain.rb:63 msgid "Could not recognize profile name: " msgstr "프로파일 이름을 인식할 수 없습니다. " -#. Reverse modes for toggling -#: src/include/apparmor/config_complain.rb:75 +#. Reverse modes for toggling +#: src/include/apparmor/config_complain.rb:75 msgid "Could not recognize mode: " msgstr "모드를 인식할 수 없습니다. " -#. translators: string is value in table for mode of apparmor -#: src/include/apparmor/config_complain.rb:117 +#. translators: string is value in table for mode of apparmor +#: src/include/apparmor/config_complain.rb:117 msgid "enforce" msgstr "항상 사용" -#: src/include/apparmor/config_complain.rb:118 +#: src/include/apparmor/config_complain.rb:118 msgid "complain" msgstr "위반" -#: src/include/apparmor/config_complain.rb:134 +#: src/include/apparmor/config_complain.rb:134 msgid "Show All Profiles" msgstr "모든 프로파일 표시" -#: src/include/apparmor/config_complain.rb:135 +#: src/include/apparmor/config_complain.rb:135 msgid "Configure Mode for Active Profiles" msgstr "활성 프로파일용 모드 구성" -#: src/include/apparmor/config_complain.rb:138 +#: src/include/apparmor/config_complain.rb:138 msgid "Show Active Profiles" msgstr "활성 프로파일 표시" -#: src/include/apparmor/config_complain.rb:139 +#: src/include/apparmor/config_complain.rb:139 msgid "Configure Mode for All Profiles" msgstr "모든 프로파일용 모드 구성" -#. `Frame( `id(`changeMode), _("Configure Profile Mode"), -#. TODO switch to variable in a module -#. TODO plain reread does not work here -#: src/include/apparmor/config_complain.rb:153 -#: src/include/apparmor/profile_dialogs.rb:1439 +#. `Frame( `id(`changeMode), _("Configure Profile Mode"), +#. TODO switch to variable in a module +#. TODO plain reread does not work here +#: src/include/apparmor/config_complain.rb:153 +#: src/include/apparmor/profile_dialogs.rb:1439 msgid "Profile Name" msgstr "프로파일 이름" -#: src/include/apparmor/config_complain.rb:153 +#: src/include/apparmor/config_complain.rb:153 msgid "Mode" msgstr "모드" -#: src/include/apparmor/config_complain.rb:160 +#: src/include/apparmor/config_complain.rb:160 msgid "Toggle Mode" msgstr "모드 전환" -#: src/include/apparmor/config_complain.rb:161 +#: src/include/apparmor/config_complain.rb:161 msgid "Set All to Enforce" msgstr "모두 강제 모드로 설정" -#: src/include/apparmor/config_complain.rb:162 +#: src/include/apparmor/config_complain.rb:162 msgid "Set All to Complain" msgstr "모두 컴플레인 모드로 설정" -#. Profile Mode Configuration -- Sets Complain and Enforce Behavior -#: src/include/apparmor/config_complain.rb:183 +#. Profile Mode Configuration -- Sets Complain and Enforce Behavior +#: src/include/apparmor/config_complain.rb:183 msgid "Profile Mode Configuration" msgstr "프로파일 모드 구성" -#. We'll need this often - cache it -#: src/include/apparmor/config_complain.rb:231 -#: src/include/apparmor/config_complain.rb:241 -#: src/include/apparmor/config_complain.rb:270 -#: src/include/apparmor/config_complain.rb:289 +#. We'll need this often - cache it +#: src/include/apparmor/config_complain.rb:231 +#: src/include/apparmor/config_complain.rb:241 +#: src/include/apparmor/config_complain.rb:270 +#: src/include/apparmor/config_complain.rb:289 msgid "Configure Profile Mode" msgstr "프로파일 모드 구성" -#: src/include/apparmor/config_complain.rb:297 +#: src/include/apparmor/config_complain.rb:297 msgid "Select an action to perform." msgstr "수행할 작업을 선택하십시오." -#. START Help Section -#. ********************************************************** -#: src/include/apparmor/helps.rb:32 +#. START Help Section +#. ********************************************************** +#: src/include/apparmor/helps.rb:32 msgid "" "<p>The Security Event Notification screen enables you to setup email \n" "alerts for security events. In the following steps, specify how often \n" @@ -1312,7 +1256,7 @@ "같은 순서로 어느 정도의 간격으로 경고를 전달 할지,\n" "누가 받을지, 경고를 보내는 중요도 등의 지정을 할 수 있습니다.</p>" -#: src/include/apparmor/helps.rb:38 +#: src/include/apparmor/helps.rb:38 msgid "" "<p><b>Notification Types</b><br> <b>Terse Notification:</b> \n" "Terse notification summarizes the total number of system events without \n" @@ -1324,15 +1268,14 @@ "전체 수만 집계합니다. <br>예:<br> <tt>dhcp-101.up.wirex.com has \n" "had 10 security events since Tue Oct 12 11:10:00 2004</tt></p>" -#: src/include/apparmor/helps.rb:44 +#: src/include/apparmor/helps.rb:44 msgid "" "<p><b>Summary Notification:</b> The Summary notification displays \n" "the logged AppArmor security events, and lists the number of \n" "individual occurrences, including the date of the last occurrence. \n" "<br>For example:<br> <tt>AppArmor: PERMITTING access to capability\n" "'setgid' (httpd2-prefork(6347) profile /usr/sbin/httpd2-prefork \n" -"active /usr/sbin/httpd2-prefork) 2 times, the latest at Sat Oct 9 16:05:54 " -"2004.</tt>\n" +"active /usr/sbin/httpd2-prefork) 2 times, the latest at Sat Oct 9 16:05:54 2004.</tt>\n" "</p>" msgstr "" "<p><b>요약 알림:</b> 요약 알림은 \n" @@ -1340,11 +1283,10 @@ "포함하여 개별 발생 수를 나열합니다. \n" "<br>예:<br> <tt>AppArmor: PERMITTING access to capability\n" "'setgid' (httpd2-prefork(6347) profile /usr/sbin/httpd2-prefork \n" -"active /usr/sbin/httpd2-prefork) 2 times, the latest at Sat Oct 9 16:05:54 " -"2004.</tt>\n" +"active /usr/sbin/httpd2-prefork) 2 times, the latest at Sat Oct 9 16:05:54 2004.</tt>\n" "</p>" -#: src/include/apparmor/helps.rb:53 +#: src/include/apparmor/helps.rb:53 msgid "" "<p><b>Verbose Notification:</b> The Verbose notification displays \n" "unmodified, logged AppArmor security events. It tells you every time \n" @@ -1360,7 +1302,7 @@ "응용 프로그램 프로파일에 의한 액세스 거부/액세스 허가 일시 및 허용\n" "또는 거부된 파일 권한 유형 등의 정보도 포함됩니다.</p>" -#: src/include/apparmor/helps.rb:61 +#: src/include/apparmor/helps.rb:61 msgid "" "<p>Verbose Notification also reports several messages that \n" "the logprof tool uses to interpret profiles. <br>For example:<br>\n" @@ -1374,7 +1316,7 @@ "/etc/apache2/httpd.conf (httpd2-prefork(6068) profile \n" "/usr/sbin/httpd2-prefork active /usr/sbin/httpd2-prefork)</tt></p>" -#: src/include/apparmor/helps.rb:68 +#: src/include/apparmor/helps.rb:68 msgid "" "<li> For each notification type that you would like \n" "enabled, select the frequency of notification that you would \n" @@ -1388,7 +1330,7 @@ "을 선택하면, 그 날에 발생한 보안 이벤트가\n" "매일 보고됩니다.</li>" -#: src/include/apparmor/helps.rb:75 +#: src/include/apparmor/helps.rb:75 msgid "" "<li> Enter the email address of those who should receive \n" "the Terse, Summary, or Verbose notifications.If there is no local \n" @@ -1404,7 +1346,7 @@ "와 시스템 우편을 수신할 <i><user></i>\n" "(을)를 입력합니다.</li>" -#: src/include/apparmor/helps.rb:83 +#: src/include/apparmor/helps.rb:83 msgid "" "<li>Select the lowest <b>severity level</b> for which a notification \n" "should be sent. Security events will be logged and the notifications \n" @@ -1420,7 +1362,7 @@ "매일 전송됩니다\n" "." -#: src/include/apparmor/helps.rb:91 +#: src/include/apparmor/helps.rb:91 msgid "" "<b>Severity Levels:</b> These are numbered 1 through 10, \n" "10 being the most severe security incident. The <b>severity.db</b> \n" @@ -1436,24 +1378,22 @@ "다른 보안 이벤트의 중요성으로\n" "정해집니다.</li>" -#: src/include/apparmor/helps.rb:99 +#: src/include/apparmor/helps.rb:99 msgid "" "<li>Select <b>Include unknown security events</b> if \n" -"you would like to include events that are not rated with a severity number." +"you would like to include events that are not rated with a severity number.</li>" msgstr "" "<li>중요도 번호에 포함되지 않는 이벤트도 전송할 경우\n" "<b>알 수 없는 보안 이벤트 포함</b>을 선택합니다.</li>" -#. ---------------------------- -#: src/include/apparmor/helps.rb:103 +#. ---------------------------- +#: src/include/apparmor/helps.rb:103 msgid "<b>AppArmor Profiling Wizard</b><br>" msgstr "<b>AppArmor 프로파일 마법사</b><br>" -#: src/include/apparmor/helps.rb:106 +#: src/include/apparmor/helps.rb:106 msgid "" -"This wizard presents entries generated by the AppArmor access control " -"module. \n" +"This wizard presents entries generated by the AppArmor access control module. \n" "You can generate highly optimized and robust security profiles \n" "by using the suggestions made by AppArmor." msgstr "" @@ -1461,7 +1401,7 @@ "AppArmor에 의해 제안된 것을 사용하는 것으로 최적화된\n" "보안 프로파일을 만들 수 있습니다." -#: src/include/apparmor/helps.rb:111 +#: src/include/apparmor/helps.rb:111 msgid "" "AppArmor suggests that you allow or deny access to specific resources \n" "or define execute permission for entries. Questions \n" @@ -1473,7 +1413,7 @@ "실행된 표준 응용 프로그램 실행 테스트 때에\n" "기록된 것을 표시하고 있습니다.<br>" -#: src/include/apparmor/helps.rb:117 +#: src/include/apparmor/helps.rb:117 msgid "" "The following help text describes the detail of the security profile \n" "syntax used by AppArmor. <br><br>At any stage, you may \n" @@ -1489,53 +1429,51 @@ "각 단계의 순서에 관해서는 Novell AppArmor 관리자 길잡이를\n" "참조하십시오.<br><br>" -#: src/include/apparmor/helps.rb:125 +#: src/include/apparmor/helps.rb:125 msgid "<b>Access Modes</b><br>" msgstr "<b>액세스 모드</b><br>" -#: src/include/apparmor/helps.rb:126 -msgid "" -"File permission access modes consists of combinations of the following six " -"modes:" +#: src/include/apparmor/helps.rb:126 +msgid "File permission access modes consists of combinations of the following six modes:" msgstr "파일 권한 액세스 모드는 6개의 모드로 구성됨:" -#: src/include/apparmor/helps.rb:129 +#: src/include/apparmor/helps.rb:129 msgid "<li>r - read</li>" msgstr "<li>r - 읽기</li>" -#: src/include/apparmor/helps.rb:130 +#: src/include/apparmor/helps.rb:130 msgid "<li>w - write</li>" msgstr "<li>w - 쓰기</li>" -#: src/include/apparmor/helps.rb:131 +#: src/include/apparmor/helps.rb:131 msgid "<li>m - mmap PROT_EXEC</li>" msgstr "<li>m - mmap PROT_EXEC</li>" -#: src/include/apparmor/helps.rb:132 +#: src/include/apparmor/helps.rb:132 msgid "<li>px - discrete profile execute</li>" msgstr "<li>px - 독립 프로파일 실행</li>" -#: src/include/apparmor/helps.rb:133 +#: src/include/apparmor/helps.rb:133 msgid "<li>ux - unconfined execute</li>" msgstr "<li>ux - 무제한 실행</li>" -#: src/include/apparmor/helps.rb:134 +#: src/include/apparmor/helps.rb:134 msgid "<li>ix - inherit execute</li>" msgstr "<li>ix - 상속 실행</li>" -#: src/include/apparmor/helps.rb:135 +#: src/include/apparmor/helps.rb:135 msgid "<li>l - link</li>" msgstr "<li>l - 연결</li>" -#: src/include/apparmor/helps.rb:136 +#: src/include/apparmor/helps.rb:136 msgid "<b>Details for Access Modes</b>" msgstr "<b>액세스 모드 자세히</b>" -#: src/include/apparmor/helps.rb:137 +#: src/include/apparmor/helps.rb:137 msgid "<b>Read mode</b><br>" msgstr "<b>읽기 모드</b><br>" -#: src/include/apparmor/helps.rb:138 +#: src/include/apparmor/helps.rb:138 msgid "" "Allows the program to have read access to the\n" "resource. Read access is required for shell scripts\n" @@ -1550,11 +1488,11 @@ "첨부될지를 결정합니다.(ptrace(2)는 strace(1),\n" "ltrace(1) 및 gdb(1) 등의 유틸리티로 사용됩니다.)" -#: src/include/apparmor/helps.rb:146 +#: src/include/apparmor/helps.rb:146 msgid "<b>Write mode</b><br>" msgstr "<b>쓰기 모드</b><br>" -#: src/include/apparmor/helps.rb:147 +#: src/include/apparmor/helps.rb:147 msgid "" "Allows the program to have write access to the\n" "resource. Files must have this permission if they are\n" @@ -1564,11 +1502,11 @@ "파일을 연결 해제(제거)하는 경우 파일에 \n" "권한이 필요합니다." -#: src/include/apparmor/helps.rb:152 +#: src/include/apparmor/helps.rb:152 msgid "<b>Mmap PROT_EXEC mode</b><br>" msgstr "<b>Mmap PROT_EXEC 모드</b><br>" -#: src/include/apparmor/helps.rb:153 +#: src/include/apparmor/helps.rb:153 msgid "" "Allows the program to call mmap with PROT_EXEC on the\n" "resource." @@ -1576,11 +1514,11 @@ "프로그램이 리소스에 있는 PROT_EXEC의 mmap을\n" "호출하는 것을 허용합니다." -#: src/include/apparmor/helps.rb:154 +#: src/include/apparmor/helps.rb:154 msgid "<b>Unconfined execute mode</b><br>" msgstr "<b>무제한 실행 모드</b><br>" -#: src/include/apparmor/helps.rb:155 +#: src/include/apparmor/helps.rb:155 msgid "" "Allows the program to execute the resource without any\n" "AppArmor profile being applied to the executed\n" @@ -1594,7 +1532,7 @@ "상속 및 독립 프로파일 실행 항목과는\n" "호환성이 없습니다." -#: src/include/apparmor/helps.rb:162 +#: src/include/apparmor/helps.rb:162 msgid "" "This mode is useful when a confined program needs to\n" "be able to perform a privileged operation, such as\n" @@ -1614,11 +1552,11 @@ "제한된 사항에 대한 자세한 내용은\n" "apparmor(7) 매뉴얼 페이지를 참조하십시오." -#: src/include/apparmor/helps.rb:172 +#: src/include/apparmor/helps.rb:172 msgid "<b>Discrete Profile execute mode</b><br>" msgstr "<b>독립 프로파일 실행 모드</b><br>" -#: src/include/apparmor/helps.rb:173 +#: src/include/apparmor/helps.rb:173 msgid "" "This mode requires that a discrete security profile is\n" "defined for a resource executed at a AppArmor domain\n" @@ -1632,11 +1570,11 @@ "상속 실행 모드나 무제한 실행 모드의 항목과는\n" "호환성이 없습니다." -#: src/include/apparmor/helps.rb:180 +#: src/include/apparmor/helps.rb:180 msgid "<b>Link mode</b><br>" msgstr "<b>링크 모드</b><br>" -#: src/include/apparmor/helps.rb:181 +#: src/include/apparmor/helps.rb:181 msgid "" "Allows the program to be able to create and remove a\n" "link with this name (including symlinks). When a link\n" @@ -1654,11 +1592,11 @@ "할 필요는 없습니다.) 링크 액세스는 링크되지 않은\n" "파일에 대해 필요합니다." -#: src/include/apparmor/helps.rb:190 +#: src/include/apparmor/helps.rb:190 msgid "<b>Globbing</b>" msgstr "<b>Globbing</b>" -#: src/include/apparmor/helps.rb:191 +#: src/include/apparmor/helps.rb:191 msgid "" "File resources may be specified with a globbing syntax\n" "similar to that used by popular shells, such as csh(1),\n" @@ -1668,44 +1606,35 @@ "일반적인 셸로 사용되는 문법 같은 것으로 지정해야\n" "합니다." -#: src/include/apparmor/helps.rb:196 -msgid "" -"<li><b>*</b> can substitute for any number of characters, except '/'<li>" +#: src/include/apparmor/helps.rb:196 +msgid "<li><b>*</b> can substitute for any number of characters, except '/'<li>" msgstr "<li><b>*</b> '/'를 제외한, 임의의 숫자로 대신할 수 있음<li>" -#: src/include/apparmor/helps.rb:199 -msgid "" -"<li><b>**</b> can substitute for any number of characters, including '/'" +#: src/include/apparmor/helps.rb:199 +msgid "<li><b>**</b> can substitute for any number of characters, including '/'</li>" msgstr "<li><b>**</b> '/'를 포함한, 임의의 숫자로 대신할 수 있음<li>" -#: src/include/apparmor/helps.rb:202 +#: src/include/apparmor/helps.rb:202 msgid "<li><b>?</b> can substitute for any single character except '/'</li>" msgstr "<li><b>?</b> '/'를 제외한, 임의의 단일 문자로 대신할 수 있음<li>" -#: src/include/apparmor/helps.rb:205 -msgid "" -"<li><b>[abc]</b> will substitute for the single character a, b, or c</li>" +#: src/include/apparmor/helps.rb:205 +msgid "<li><b>[abc]</b> will substitute for the single character a, b, or c</li>" msgstr "<li><b>[abc]</b> 단일 문자 a, b, 또는 c를 대신할 수 있음</li>" -#: src/include/apparmor/helps.rb:208 -msgid "" -"<li><b>[a-c]</b> will substitute for the single character a, b, or c</li>" +#: src/include/apparmor/helps.rb:208 +msgid "<li><b>[a-c]</b> will substitute for the single character a, b, or c</li>" msgstr "<li><b>[a-c]</b> 단일 문자 a, b, 또는 c를 대신할 수 있음</li>" -#: src/include/apparmor/helps.rb:211 -msgid "" -"<li><b>{ab,cd}</b> will expand to one rule to match ab, one rule to match " -"cd</li>" -msgstr "" -"<li><b>{ab,cd}</b> ab에 일치하는 한 개의 규칙과 cd에 일치하는 한 개의 규칙으" -"로 확장됨</li>" +#: src/include/apparmor/helps.rb:211 +msgid "<li><b>{ab,cd}</b> will expand to one rule to match ab, one rule to match cd</li>" +msgstr "<li><b>{ab,cd}</b> ab에 일치하는 한 개의 규칙과 cd에 일치하는 한 개의 규칙으로 확장됨</li>" -#: src/include/apparmor/helps.rb:214 +#: src/include/apparmor/helps.rb:214 msgid "<b>Clean Exec - for sanitized execution</b>" msgstr "<b>정리 실행 - 정리 실행에 대해</b>" -#: src/include/apparmor/helps.rb:215 +#: src/include/apparmor/helps.rb:215 msgid "" "The Clean Exec option for the discrete profile and unconstrained \n" "execute permissions provide added security by stripping the \n" @@ -1721,8 +1650,8 @@ "환경을 정리할지 여부를 선택하라는 메시지가 표시됩니다.\n" "변수는 다음과 같습니다." -#. Globalz -#: src/include/apparmor/profile_dialogs.rb:55 +#. Globalz +#: src/include/apparmor/profile_dialogs.rb:55 msgid "" "<b>Capability Selection</b>.\n" "<br>Select desired capabilities for this profile. \n" @@ -1732,116 +1661,116 @@ "<br>이 프로파일에 대해 원하는 기능을 선택하십시오.\n" "기능에 대한 정보를 보려면 기능 이름을 선택하십시오." -#: src/include/apparmor/profile_dialogs.rb:62 +#: src/include/apparmor/profile_dialogs.rb:62 msgid "Capabilities enabled for the profile" msgstr "프로파일용으로 활성화된 기능" -#: src/include/apparmor/profile_dialogs.rb:80 +#: src/include/apparmor/profile_dialogs.rb:80 msgid "Capabilities" msgstr "기능" -#. We'll need this often - cache it -#: src/include/apparmor/profile_dialogs.rb:153 -#: src/include/apparmor/profile_dialogs.rb:179 +#. We'll need this often - cache it +#: src/include/apparmor/profile_dialogs.rb:153 +#: src/include/apparmor/profile_dialogs.rb:179 msgid "All" msgstr "전체" -#: src/include/apparmor/profile_dialogs.rb:199 +#: src/include/apparmor/profile_dialogs.rb:199 msgid "Network Family" msgstr "네트워크 패밀리" -#: src/include/apparmor/profile_dialogs.rb:205 +#: src/include/apparmor/profile_dialogs.rb:205 msgid "Socket Type" msgstr "소켓 형식" -#. Popup the Edit Profile Entry dialog -#. return a map containing PERM and FILE -#. for the updated permissions and filename -#. for the profile entry -#: src/include/apparmor/profile_dialogs.rb:292 +#. Popup the Edit Profile Entry dialog +#. return a map containing PERM and FILE +#. for the updated permissions and filename +#. for the profile entry +#: src/include/apparmor/profile_dialogs.rb:292 msgid "Profile Entry for " msgstr "프로파일 항목 " -#: src/include/apparmor/profile_dialogs.rb:297 +#: src/include/apparmor/profile_dialogs.rb:297 msgid "Enter or Modify Filename" msgstr "파일 이름 입력 또는 수정" -#: src/include/apparmor/profile_dialogs.rb:298 +#: src/include/apparmor/profile_dialogs.rb:298 msgid "&Browse" msgstr "찾아보기(&B)" -#: src/include/apparmor/profile_dialogs.rb:306 -#: src/include/apparmor/profile_dialogs.rb:1032 +#: src/include/apparmor/profile_dialogs.rb:306 +#: src/include/apparmor/profile_dialogs.rb:1032 msgid "Permissions" msgstr "권한" -#: src/include/apparmor/profile_dialogs.rb:310 +#: src/include/apparmor/profile_dialogs.rb:310 msgid "Read" msgstr "읽기" -#: src/include/apparmor/profile_dialogs.rb:315 +#: src/include/apparmor/profile_dialogs.rb:315 msgid "Write" msgstr "쓰기" -#: src/include/apparmor/profile_dialogs.rb:320 +#: src/include/apparmor/profile_dialogs.rb:320 msgid "Link" msgstr "링크" -#: src/include/apparmor/profile_dialogs.rb:325 +#: src/include/apparmor/profile_dialogs.rb:325 msgid "Append" msgstr "추가" -#: src/include/apparmor/profile_dialogs.rb:330 +#: src/include/apparmor/profile_dialogs.rb:330 msgid "Lock" msgstr "잠금" -#: src/include/apparmor/profile_dialogs.rb:335 +#: src/include/apparmor/profile_dialogs.rb:335 msgid "MMap PROT_EXEC" msgstr "MMap PROT_EXEC" -#: src/include/apparmor/profile_dialogs.rb:340 +#: src/include/apparmor/profile_dialogs.rb:340 msgid "Execute" msgstr "실행" -#: src/include/apparmor/profile_dialogs.rb:345 +#: src/include/apparmor/profile_dialogs.rb:345 msgid "Inherit" msgstr "상속" -#: src/include/apparmor/profile_dialogs.rb:350 +#: src/include/apparmor/profile_dialogs.rb:350 msgid "Profile" msgstr "프로파일" -#: src/include/apparmor/profile_dialogs.rb:355 +#: src/include/apparmor/profile_dialogs.rb:355 msgid "Profile Clean Exec" msgstr "프로파일 실행 파일 정리" -#: src/include/apparmor/profile_dialogs.rb:360 +#: src/include/apparmor/profile_dialogs.rb:360 msgid "Unconstrained" msgstr "제한 없음" -#: src/include/apparmor/profile_dialogs.rb:365 +#: src/include/apparmor/profile_dialogs.rb:365 msgid "Unconstrained Clean Exec" msgstr "제약되지 않은 실행 파일 정리" -#. Popup a dialog to let a user browse for a file -#: src/include/apparmor/profile_dialogs.rb:542 +#. Popup a dialog to let a user browse for a file +#: src/include/apparmor/profile_dialogs.rb:542 msgid "Select Directory" msgstr "디렉토리 선택" -#: src/include/apparmor/profile_dialogs.rb:545 +#: src/include/apparmor/profile_dialogs.rb:545 msgid "Select File" msgstr "파일 선택" -#. Update table values -#: src/include/apparmor/profile_dialogs.rb:602 +#. Update table values +#: src/include/apparmor/profile_dialogs.rb:602 msgid "Entry will not be added. Entry name or permissions not defined." msgstr "항목이 추가되지 않습니다. 항목 이름 또는 권한이 정의되지 않았습니다." -#. Prompts the user for a hatname -#. Side-Effect: sets Settings["CURRENT_HAT"] -#. returns true (hat entered) -#. false (user aborted) -#: src/include/apparmor/profile_dialogs.rb:849 +#. Prompts the user for a hatname +#. Side-Effect: sets Settings["CURRENT_HAT"] +#. returns true (hat entered) +#. false (user aborted) +#: src/include/apparmor/profile_dialogs.rb:849 msgid "" "Enter the name of the Hat that you would like \n" "to add to the profile\n" @@ -1849,16 +1778,16 @@ "프로파일에 추가하려는 Hat의 이름을 \n" "입력하십시오.\n" -#: src/include/apparmor/profile_dialogs.rb:859 +#: src/include/apparmor/profile_dialogs.rb:859 msgid "&Hat name to add" msgstr "추가할 Hat 이름(&H)" -#: src/include/apparmor/profile_dialogs.rb:865 +#: src/include/apparmor/profile_dialogs.rb:865 msgid "&Create Hat" msgstr "Hat 작성(&C)" -#. Check for no application entry in the dialog -#: src/include/apparmor/profile_dialogs.rb:881 +#. Check for no application entry in the dialog +#: src/include/apparmor/profile_dialogs.rb:881 msgid "" "You have not given a name for the hat you want to add.\n" "Please \n" @@ -1868,26 +1797,18 @@ "새 hat를 만들려면\n" "hat 이름을 입력하고, 이 마법사를 취소하려면 중단 또는 취소를 누르십시오." -#: src/include/apparmor/profile_dialogs.rb:889 -msgid "" -"The profile already contains the provided hat name. Enter a different name " -"or press Abort to cancel this wizard." -msgstr "" -"프로파일에 제공된 hat 이름이 이미 포함되어 있습니다. 다른 이름을 입력하거나 " -"[중단]을 눌러 이 마법사를 취소하십시오." +#: src/include/apparmor/profile_dialogs.rb:889 +msgid "The profile already contains the provided hat name. Enter a different name or press Abort to cancel this wizard." +msgstr "프로파일에 제공된 hat 이름이 이미 포함되어 있습니다. 다른 이름을 입력하거나 [중단]을 눌러 이 마법사를 취소하십시오." -#. FIXME: format these texts better -#. help text -#: src/include/apparmor/profile_dialogs.rb:928 -msgid "" -"<p>View and modify the contents of an individual profile. For existing " -"entries double click the permissions to access a modification dialog.</p>" -msgstr "" -"<p>개별 프로파일의 내용을 보고 수정합니다. 기존 항목의 경우 권한을 두 번 클릭" -"하여 수정 대화 상자에 액세스하십시오.</p>" +#. FIXME: format these texts better +#. help text +#: src/include/apparmor/profile_dialogs.rb:928 +msgid "<p>View and modify the contents of an individual profile. For existing entries double click the permissions to access a modification dialog.</p>" +msgstr "<p>개별 프로파일의 내용을 보고 수정합니다. 기존 항목의 경우 권한을 두 번 클릭하여 수정 대화 상자에 액세스하십시오.</p>" -#. help text -#: src/include/apparmor/profile_dialogs.rb:933 +#. help text +#: src/include/apparmor/profile_dialogs.rb:933 msgid "" "<p><b>Permission Definitions:</b><br><code> r - read <br> \n" "w -write<br>l - link<br>m - mmap PROT_EXEC<br>k - file locking<br>\n" @@ -1901,187 +1822,164 @@ "P - 독립 프로파일<br>(*정리 실행)<br>u - 무제한<br>\n" "U - 무제한<br>(*정리 실행)</code></p>" -#. help text -#: src/include/apparmor/profile_dialogs.rb:942 -msgid "" -"<p><b>Add Entry:</b><br>Select the type of resource to add from the drop " -"down list.</p>" -msgstr "" -"<p><b>항목 추가:</b><br>드롭다운 목록에서 추가할 리소스 유형을 선택합니다." +#. help text +#: src/include/apparmor/profile_dialogs.rb:942 +msgid "<p><b>Add Entry:</b><br>Select the type of resource to add from the drop down list.</p>" +msgstr "<p><b>항목 추가:</b><br>드롭다운 목록에서 추가할 리소스 유형을 선택합니다.</p>" -#. help text - part x1 -#: src/include/apparmor/profile_dialogs.rb:947 +#. help text - part x1 +#: src/include/apparmor/profile_dialogs.rb:947 msgid "<p><ul><li><b>File</b><br>Add a file entry to this profile.</li>" msgstr "<p><ul><li><b>파일</b><br>이 프로파일에 파일 항목을 추가합니다.</li>" -#. help text - part x2 -#: src/include/apparmor/profile_dialogs.rb:951 +#. help text - part x2 +#: src/include/apparmor/profile_dialogs.rb:951 msgid "<li><b>Directory</b><br>Add a directory entry to this profile.</li>" msgstr "<li><b>디렉토리</b><br>이 프로파일에 디렉토리 항목을 추가합니다.</li>" -#. help text - part x3 -#: src/include/apparmor/profile_dialogs.rb:955 +#. help text - part x3 +#: src/include/apparmor/profile_dialogs.rb:955 msgid "<li><b>Capability</b><br>Add a capability entry to this profile.</li>" msgstr "<li><b>기능</b><br>이 프로파일에 기능 항목을 추가합니다.</li>" -#. help text - part x4 -#: src/include/apparmor/profile_dialogs.rb:959 +#. help text - part x4 +#: src/include/apparmor/profile_dialogs.rb:959 msgid "" "<li><b>Include</b><br>Add an include entry to this profile. This option \n" -"includes the profile entry contents of another file in this profile at load " -"time.</li>" +"includes the profile entry contents of another file in this profile at load time.</li>" msgstr "" "<li><b>포함</b><br>이 프로파일에 포함 항목을 추가합니다.\n" -"이 옵션에는 로드할 때 이 프로파일에 있는 다른 파일의 프로파일 항목 내용이 포" -"함됩니다.</li>" +"이 옵션에는 로드할 때 이 프로파일에 있는 다른 파일의 프로파일 항목 내용이 포함됩니다.</li>" -#. help text - part x5 -#: src/include/apparmor/profile_dialogs.rb:963 +#. help text - part x5 +#: src/include/apparmor/profile_dialogs.rb:963 msgid "" "<li><b>Network Entry</b><br>Add a network rule entry to this profile. \n" -"This option will allow you to specify network access privileges for the " -"profile. \n" +"This option will allow you to specify network access privileges for the profile. \n" "You may specify a network address family and socket type.</li>" msgstr "" "<li><b>네트워크 항목</b><br>네트워크 규칙 항목을 이 프로파일에 추가합니다.\n" -"이 옵션은 사용자가 지정한 프로파일에 네트워크 액세스 권한을 설정할 수 있습니" -"다.\n" +"이 옵션은 사용자가 지정한 프로파일에 네트워크 액세스 권한을 설정할 수 있습니다.\n" "네트워크 주소 그룹 및 소켓 유형을 지정해야 할 수 있습니다.</li>" -#. help text - part x6 -#: src/include/apparmor/profile_dialogs.rb:969 +#. help text - part x6 +#: src/include/apparmor/profile_dialogs.rb:969 msgid "" "<li><b>Hat</b><br>Add a sub-profile for this profile, called a Hat. This\n" -"option is analogous to manually creating a new profile, which can be " -"selected\n" +"option is analogous to manually creating a new profile, which can be selected\n" "during execution only in the context of being asked for by a <b>changehat\n" "aware</b> application. \n" -"For more information on changehat, see <b>man changehat</b> on your system " -"or the Novell AppArmor Administration Guide.</li>" +"For more information on changehat, see <b>man changehat</b> on your system or the Novell AppArmor Administration Guide.</li>" msgstr "" -"<li><b>Hat</b><br>이 프로파일에 대해 Hat이라는 하위 프로파일을 추가합니다. " -"이\n" +"<li><b>Hat</b><br>이 프로파일에 대해 Hat이라는 하위 프로파일을 추가합니다. 이\n" "옵션은 새 프로파일을 수동으로 생성하는 것과 같으며,\n" "<b>changehataware</b> 응용 프로그램이 요청한 컨텍스트에서만\n" "실행 중에 선택할 수 있습니다. \n" -"changehat에 대한 자세한 내용은 시스템의 <b>man changehat</b>이나 Novell " -"AppArmor 관리 가이드를 참조하십시오.</li>" +"changehat에 대한 자세한 내용은 시스템의 <b>man changehat</b>이나 Novell AppArmor 관리 가이드를 참조하십시오.</li>" -#. help text - part x7 -#: src/include/apparmor/profile_dialogs.rb:977 +#. help text - part x7 +#: src/include/apparmor/profile_dialogs.rb:977 msgid "</ul></p><p><b>Edit Entry:</b><br>Edit the selected entry.</p>" msgstr "</ul></p><p><b>항목 편집</b><br>선택한 항목을 편집합니다.</p>" -#. help text -#: src/include/apparmor/profile_dialogs.rb:982 -msgid "" -"<p><b>Delete Entry:</b><br>Removes the selected entry from this profile.</p>" +#. help text +#: src/include/apparmor/profile_dialogs.rb:982 +msgid "<p><b>Delete Entry:</b><br>Removes the selected entry from this profile.</p>" msgstr "<p><b>항목 삭제:</b><br>이 프로파일에서 선택한 항목을 제거합니다.</p>" -#. help text - part y1 -#: src/include/apparmor/profile_dialogs.rb:987 +#. help text - part y1 +#: src/include/apparmor/profile_dialogs.rb:987 msgid "" "<p><b>*Clean Exec</b><br>The Clean Exec option for the discrete profile \n" -"and unconstrained execute permissions provide added security by stripping " -"the environment \n" -"that is inherited by the child program of specific variables. These " -"variables are:" +"and unconstrained execute permissions provide added security by stripping the environment \n" +"that is inherited by the child program of specific variables. These variables are:" msgstr "" "<p><b>*정리 실행</b><br>독립 실행 프로파일이나 무제한 실행에서\n" "정리 실행 옵션은 특정 환경 변수를 자식 프로그램과 주고받지 않고\n" "없애는 것으로 보조적인 보안성을 확보합니다. 변수는 다음과 같습니다:" -#. help text - part y2 -#: src/include/apparmor/profile_dialogs.rb:998 +#. help text - part y2 +#: src/include/apparmor/profile_dialogs.rb:998 msgid "&File" msgstr "파일(&F)" -#: src/include/apparmor/profile_dialogs.rb:999 +#: src/include/apparmor/profile_dialogs.rb:999 msgid "Network &Rule" msgstr "네트워크 규칙(&R)" -#: src/include/apparmor/profile_dialogs.rb:1000 +#: src/include/apparmor/profile_dialogs.rb:1000 msgid "&Directory" msgstr "디렉토리(&D)" -#: src/include/apparmor/profile_dialogs.rb:1001 +#: src/include/apparmor/profile_dialogs.rb:1001 msgid "&Capability" msgstr "기능(&C)" -#: src/include/apparmor/profile_dialogs.rb:1002 +#: src/include/apparmor/profile_dialogs.rb:1002 msgid "&Include File" msgstr "포함 파일(&I)" -#: src/include/apparmor/profile_dialogs.rb:1012 +#: src/include/apparmor/profile_dialogs.rb:1012 msgid "AppArmor profile " msgstr "AppArmor 프로파일" -#: src/include/apparmor/profile_dialogs.rb:1020 +#: src/include/apparmor/profile_dialogs.rb:1020 msgid "&Hat" msgstr "Hat(&H)" -#: src/include/apparmor/profile_dialogs.rb:1021 +#: src/include/apparmor/profile_dialogs.rb:1021 msgid "AppArmor profile for " msgstr "다음에 대한 AppArmor 프로파일: " -#. Define the widget contents -#. for the Wizard -#: src/include/apparmor/profile_dialogs.rb:1032 +#. Define the widget contents +#. for the Wizard +#: src/include/apparmor/profile_dialogs.rb:1032 msgid "File Name" msgstr "파일 이름" -#: src/include/apparmor/profile_dialogs.rb:1039 +#: src/include/apparmor/profile_dialogs.rb:1039 msgid "Add Entry" msgstr "항목 추가" -#: src/include/apparmor/profile_dialogs.rb:1040 +#: src/include/apparmor/profile_dialogs.rb:1040 msgid "&Edit Entry" msgstr "항목 편집(&E)" -#: src/include/apparmor/profile_dialogs.rb:1041 +#: src/include/apparmor/profile_dialogs.rb:1041 msgid "&Delete Entry" msgstr "항목 삭제(&D)" -#: src/include/apparmor/profile_dialogs.rb:1075 +#: src/include/apparmor/profile_dialogs.rb:1075 msgid "AppArmor Hat Dialog" msgstr "AppArmor Hat 대화 상자" -#: src/include/apparmor/profile_dialogs.rb:1105 +#: src/include/apparmor/profile_dialogs.rb:1105 msgid "AppArmor Profile Dialog" msgstr "AppArmor 프로파일 대화 상자" -#. Widget activated in the table -#: src/include/apparmor/profile_dialogs.rb:1145 -msgid "" -"Include entries can not be edited. Select add or delete to manage Include " -"entries." -msgstr "" -"포함 항목을 편집할 수 없습니다. [추가] 또는 [삭제]를 선택하여 포함 항목을 관" -"리하십시오." +#. Widget activated in the table +#: src/include/apparmor/profile_dialogs.rb:1145 +msgid "Include entries can not be edited. Select add or delete to manage Include entries." +msgstr "포함 항목을 편집할 수 없습니다. [추가] 또는 [삭제]를 선택하여 포함 항목을 관리하십시오." -#. Make sure that the entry doesn't already exist -#: src/include/apparmor/profile_dialogs.rb:1294 +#. Make sure that the entry doesn't already exist +#: src/include/apparmor/profile_dialogs.rb:1294 msgid "Hats can not have embedded hats." msgstr "Hat에는 다른 hat을 포함할 수 없습니다." -#: src/include/apparmor/profile_dialogs.rb:1306 +#: src/include/apparmor/profile_dialogs.rb:1306 msgid "Select File to Include" msgstr "포함할 파일 선택" -#: src/include/apparmor/profile_dialogs.rb:1335 -msgid "" -"Invalid #include file. Include files must be located in one of these " -"directories: \n" -msgstr "" -"잘못된 #include 파일입니다. Include 파일은 다음 디렉토리 중 하나에 있어야 합" -"니다. \n" +#: src/include/apparmor/profile_dialogs.rb:1335 +msgid "Invalid #include file. Include files must be located in one of these directories: \n" +msgstr "잘못된 #include 파일입니다. Include 파일은 다음 디렉토리 중 하나에 있어야 합니다. \n" -#: src/include/apparmor/profile_dialogs.rb:1379 +#: src/include/apparmor/profile_dialogs.rb:1379 msgid "Save changes to the profile" msgstr "프로파일에 변경사항 저장" -#: src/include/apparmor/profile_dialogs.rb:1380 +#: src/include/apparmor/profile_dialogs.rb:1380 msgid "" "Save the changes to this profile? \n" "(Note: after saving, AppArmor profiles will be reloaded.)\n" @@ -2089,12 +1987,12 @@ "이 프로파일에 변경사항을 저장하시겠습니까? \n" "(참고: 저장한 후 AppArmor 프로파일이 다시 로드됩니다.)\n" -#. We'll need this often - cache it -#: src/include/apparmor/profile_dialogs.rb:1476 +#. We'll need this often - cache it +#: src/include/apparmor/profile_dialogs.rb:1476 msgid "You must select a profile to edit." msgstr "편집할 프로파일을 선택해야 합니다." -#: perl-lib/Notify.pm:51 +#: perl-lib/Notify.pm:51 #, perl-format msgid "Failed copying %s." msgstr "%s을(를) 복사하지 못했습니다."