Author: minton Date: 2015-12-07 20:01:52 +0100 (Mon, 07 Dec 2015) New Revision: 95071 Modified: trunk/yast/cs/po/auth-client.cs.po Log: Merged auth-client.pot for cs Modified: trunk/yast/cs/po/auth-client.cs.po =================================================================== --- trunk/yast/cs/po/auth-client.cs.po 2015-12-07 19:01:41 UTC (rev 95070) +++ trunk/yast/cs/po/auth-client.cs.po 2015-12-07 19:01:52 UTC (rev 95071) @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: opensuse-i 18n\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2015-08-25 18:36+0200\n" +"POT-Creation-Date: 2015-11-30 10:04+0100\n" "PO-Revision-Date: 2015-11-05 13:51+0100\n" "Last-Translator: Vojtěch Zeisek <vojtech.zeisek@opensuse.org>\n" "Language-Team: Czech <opensuse-cz@opensuse.org>\n" @@ -56,8 +56,10 @@ #. Render overview and edit buttons on left side, config editor on right side. #: src/lib/yauthclient/main_dialog.rb:55 -msgid "Authentication Client Config" -msgstr "Konfigurace ověřovacího klienta" +#, fuzzy +#| msgid "Authentication Client Configuration (sssd)" +msgid "Authentication Client Configuration" +msgstr "Konfigurace ověřovacího klienta (sssd)" #. Overview of all config sections #: src/lib/yauthclient/main_dialog.rb:62 @@ -84,36 +86,37 @@ msgid "Delete Service/Domain" msgstr "Smazat službu/doménu" -#. For the currently selection config section, render customised parameters and values in a table. -#: src/lib/yauthclient/main_dialog.rb:112 +#. TRANSLATORS: Label of the area used to customise parameters. +#. %s is the name of the section being customised. +#: src/lib/yauthclient/main_dialog.rb:114 msgid "Customisation - %s" msgstr "Přizpůsobení - %s" -#: src/lib/yauthclient/main_dialog.rb:116 -#: src/lib/yauthclient/main_dialog.rb:141 +#: src/lib/yauthclient/main_dialog.rb:118 +#: src/lib/yauthclient/main_dialog.rb:143 msgid "Name" msgstr "Název" -#: src/lib/yauthclient/main_dialog.rb:116 +#: src/lib/yauthclient/main_dialog.rb:118 msgid "Value" msgstr "Hodnota" -#: src/lib/yauthclient/main_dialog.rb:116 -#: src/lib/yauthclient/main_dialog.rb:141 +#: src/lib/yauthclient/main_dialog.rb:118 +#: src/lib/yauthclient/main_dialog.rb:143 msgid "Description" msgstr "Popis" #. For the currently selected config section, render list of additional parameters for customisation. -#: src/lib/yauthclient/main_dialog.rb:135 +#: src/lib/yauthclient/main_dialog.rb:137 msgid "More Parameters" msgstr "Více parametrů" -#: src/lib/yauthclient/main_dialog.rb:138 +#: src/lib/yauthclient/main_dialog.rb:140 msgid "Name filter:" msgstr "Filtr názvů:" #. Check system environment for the proper operation of SSSD -#: src/lib/yauthclient/main_dialog.rb:167 +#: src/lib/yauthclient/main_dialog.rb:169 msgid "" "Your system is configured for using nss_ldap.\n" "This module is designed to configure your system via sssd.\n" @@ -125,7 +128,7 @@ "Pokud budete pokračovat, vaše nastavení nss_ldap bude odebráno.\n" "Chcete pokračovat?" -#: src/lib/yauthclient/main_dialog.rb:177 +#: src/lib/yauthclient/main_dialog.rb:179 msgid "" "Your system is configured as OES client.\n" "This module is designed to configure your system via sssd.\n" @@ -138,25 +141,25 @@ "Chcete pokračovat?" #. Delete the chosen section (domain or service) -#: src/lib/yauthclient/main_dialog.rb:221 +#: src/lib/yauthclient/main_dialog.rb:223 msgid "You may not delete section SSSD." msgstr "Nelze smazat oddíl SSSD." -#: src/lib/yauthclient/main_dialog.rb:223 +#: src/lib/yauthclient/main_dialog.rb:225 msgid "Do you really wish to delete section %s?" msgstr "Opravdu chcete odstranit oddíl %s?" #. Forbid removal of mandatory parameters -#: src/lib/yauthclient/main_dialog.rb:267 +#: src/lib/yauthclient/main_dialog.rb:269 msgid "This is a mandatory parameter and it may not be deleted." msgstr "Toto je povinný parametr a neměl by být smazán." #. Warn against removal of important parameters -#: src/lib/yauthclient/main_dialog.rb:272 +#: src/lib/yauthclient/main_dialog.rb:274 msgid "Confirm parameter removal: " msgstr "Potvrďte odstranění parametru: " -#: src/lib/yauthclient/main_dialog.rb:273 +#: src/lib/yauthclient/main_dialog.rb:275 msgid "" "The parameter is important. Removal of the parameter may cause SSSD startup failure.\n" "Please consult SSSD manual page before moving on.\n" @@ -167,11 +170,11 @@ "Opravdu chcete pokračovat?" #. Save settings - validate -#: src/lib/yauthclient/main_dialog.rb:303 +#: src/lib/yauthclient/main_dialog.rb:305 msgid "No domain enabled" msgstr "Žádná doména není povolena" -#: src/lib/yauthclient/main_dialog.rb:304 +#: src/lib/yauthclient/main_dialog.rb:306 msgid "" "No domain has been enabled in [sssd] \"domains\" parameter.\n" "SSSD will not start, and only local authentication will be available.\n" @@ -182,7 +185,7 @@ "Opravdu chcete pokračovat?" #. user must correct the mistake -#: src/lib/yauthclient/main_dialog.rb:321 +#: src/lib/yauthclient/main_dialog.rb:323 msgid "Inactive domain(s) found" msgstr "Nalezena neaktivní doména(-y)" @@ -1143,6 +1146,9 @@ msgid "System is configured for using /etc/passwd only.\n" msgstr "Systém je nastaven tak, aby používal pouze /etc/passwd.\n" +#~ msgid "Authentication Client Config" +#~ msgstr "Konfigurace ověřovacího klienta" + #~ msgid "Do you really want to delete the domain '%1'?" #~ msgstr "Opravdu chcete smazat doménu '%1'?" @@ -1227,9 +1233,6 @@ #~ msgid "Delete" #~ msgstr "Smazat" -#~ msgid "Authentication Client Configuration (sssd)" -#~ msgstr "Konfigurace ověřovacího klienta (sssd)" - #~ msgid "SSSD provides a set of daemons to manage access to remote directories and authentication mechanisms.<br>You have to confiugre at least one authentication domain.<br>The first you have to set for a authentication domain is the identification and auth provider used for the domain.<br>In the next step you have to set some mandatory parameter for the selected providers.You can select later all parameters available for the selected identification and auth provider.SSSD provides following id_provider:<br><b>proxy</b>: Support a legacy NSS provider.<br><b>local</b>: SSSD internal provider for local users.<br><b>ldap</b>: LDAP provider. See sssd-ldap(5) for more information on configuring LDAP.<br><b>ipa</b>: FreeIPA and Red Hat Enterprise Identity Management provider.<br><b>ad</b>: Active Directory provider.<br>Supported auth providers are:<br><b>ldap</b> for native LDAP authentication.<br><b>krb5</b> for Kerberos authentication.<br><b>ipa</b> FreeIPA and Red Hat Enterprise Ident ity Management provider.<br><b>ad</b> Active Directory provider.<br><b>proxy</b> for relaying authentication to some other PAM target.<br><b>none</b> disables authentication explicitly.<br>The default auth provider is the id_provider.<br>" #~ msgstr "SSSD poskytuje sadu démonů pro správu přístupu ke vzdáleným adresářům a ověřovacím mechanismům.<br>Musíte nakonfigurovat alespoň jednu ověřovací doménu.<br>Co musíte nejprve nastavit pro ověřovací doménu je poskytovatel identifikace a ověření, kterého daná doména používá.<br>V dalším kroku musíte nastavit některé nezbytné parametry vybraných poskytovatelů.<br>Později můžete pro vybraného identifikačního a ověřovacího poskytovatele vybrat všechny dostupné parametry.SSSD poskytuje následující identifikátory id_provider:<br><b>proxy</b>: Podpora zastaralého poskytovatele NSS.<br><b>local</b>: Interní SSSD poskytovatel pro místní uživatele.<br><b>ldap</b>: Poskytovatel LDAP. Pro další informace o konfigurování LDAP vizte sssd-ldap(5).<br><b>ipa</b>: Poskytovatelé FreeIPA a Red Hat Enterprise Identity Management.<br><b>ad</b>: Poskytovatel Active Directory.<br>Podporovaní ověřovací poskytovatelé jsou:<br>< b>ldap</b> pro běžné LDAP ověření.<br><b>krb5</b> pro ověření pomocí protokolu Kerberos.<br><b>ipa</b> poskytovatel FreeIPA a Red Hat Enterprise Identity Management.<br><b>ad</b> poskytovatel Active Directory.<br><b>proxy</b> pro předávání ověření nějakému dalšímu cíli PAM.<br><b>none</b> přímo zakazuje ověřování.<br>Výchozí ověřovací poskytovatel je id_provider.<br>"