[opensuse-translation-commit] r96980 - branches/plus-SLE12-SP2/yast/ko/po
Author: keichwa
Date: 2016-09-22 14:08:28 +0200 (Thu, 22 Sep 2016)
New Revision: 96980
Modified:
branches/plus-SLE12-SP2/yast/ko/po/add-on-creator.ko.po
branches/plus-SLE12-SP2/yast/ko/po/add-on.ko.po
branches/plus-SLE12-SP2/yast/ko/po/audit-laf.ko.po
branches/plus-SLE12-SP2/yast/ko/po/auth-client.ko.po
branches/plus-SLE12-SP2/yast/ko/po/autoinst.ko.po
branches/plus-SLE12-SP2/yast/ko/po/base.ko.po
branches/plus-SLE12-SP2/yast/ko/po/bootloader.ko.po
branches/plus-SLE12-SP2/yast/ko/po/ca-management.ko.po
branches/plus-SLE12-SP2/yast/ko/po/cio.ko.po
branches/plus-SLE12-SP2/yast/ko/po/cluster.ko.po
branches/plus-SLE12-SP2/yast/ko/po/control-center.ko.po
branches/plus-SLE12-SP2/yast/ko/po/control.ko.po
branches/plus-SLE12-SP2/yast/ko/po/country.ko.po
branches/plus-SLE12-SP2/yast/ko/po/crowbar.ko.po
branches/plus-SLE12-SP2/yast/ko/po/dhcp-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/dns-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/docker.ko.po
branches/plus-SLE12-SP2/yast/ko/po/fcoe-client.ko.po
branches/plus-SLE12-SP2/yast/ko/po/firewall-services.ko.po
branches/plus-SLE12-SP2/yast/ko/po/firewall.ko.po
branches/plus-SLE12-SP2/yast/ko/po/firstboot.ko.po
branches/plus-SLE12-SP2/yast/ko/po/fonts.ko.po
branches/plus-SLE12-SP2/yast/ko/po/geo-cluster.ko.po
branches/plus-SLE12-SP2/yast/ko/po/http-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/inetd.ko.po
branches/plus-SLE12-SP2/yast/ko/po/installation.ko.po
branches/plus-SLE12-SP2/yast/ko/po/iplb.ko.po
branches/plus-SLE12-SP2/yast/ko/po/iscsi-client.ko.po
branches/plus-SLE12-SP2/yast/ko/po/iscsi-lio-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/isns.ko.po
branches/plus-SLE12-SP2/yast/ko/po/journal.ko.po
branches/plus-SLE12-SP2/yast/ko/po/kdump.ko.po
branches/plus-SLE12-SP2/yast/ko/po/languages_db.ko.po
branches/plus-SLE12-SP2/yast/ko/po/ldap.ko.po
branches/plus-SLE12-SP2/yast/ko/po/mail.ko.po
branches/plus-SLE12-SP2/yast/ko/po/multipath.ko.po
branches/plus-SLE12-SP2/yast/ko/po/ncurses-pkg.ko.po
branches/plus-SLE12-SP2/yast/ko/po/ncurses.ko.po
branches/plus-SLE12-SP2/yast/ko/po/nfs.ko.po
branches/plus-SLE12-SP2/yast/ko/po/nfs_server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/nis.ko.po
branches/plus-SLE12-SP2/yast/ko/po/nis_server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/ntp-client.ko.po
branches/plus-SLE12-SP2/yast/ko/po/oneclickinstall.ko.po
branches/plus-SLE12-SP2/yast/ko/po/online-update-configuration.ko.po
branches/plus-SLE12-SP2/yast/ko/po/online-update.ko.po
branches/plus-SLE12-SP2/yast/ko/po/opensuse_mirror.ko.po
branches/plus-SLE12-SP2/yast/ko/po/packager.ko.po
branches/plus-SLE12-SP2/yast/ko/po/pkg-bindings.ko.po
branches/plus-SLE12-SP2/yast/ko/po/printer.ko.po
branches/plus-SLE12-SP2/yast/ko/po/product-creator.ko.po
branches/plus-SLE12-SP2/yast/ko/po/proxy.ko.po
branches/plus-SLE12-SP2/yast/ko/po/rdp.ko.po
branches/plus-SLE12-SP2/yast/ko/po/registration.ko.po
branches/plus-SLE12-SP2/yast/ko/po/relocation-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/s390.ko.po
branches/plus-SLE12-SP2/yast/ko/po/samba-client.ko.po
branches/plus-SLE12-SP2/yast/ko/po/samba-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/samba-users.ko.po
branches/plus-SLE12-SP2/yast/ko/po/scanner.ko.po
branches/plus-SLE12-SP2/yast/ko/po/security.ko.po
branches/plus-SLE12-SP2/yast/ko/po/slp-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/snapper.ko.po
branches/plus-SLE12-SP2/yast/ko/po/squid.ko.po
branches/plus-SLE12-SP2/yast/ko/po/storage.ko.po
branches/plus-SLE12-SP2/yast/ko/po/sudo.ko.po
branches/plus-SLE12-SP2/yast/ko/po/support.ko.po
branches/plus-SLE12-SP2/yast/ko/po/sysconfig.ko.po
branches/plus-SLE12-SP2/yast/ko/po/tftp-server.ko.po
branches/plus-SLE12-SP2/yast/ko/po/timezone_db.ko.po
branches/plus-SLE12-SP2/yast/ko/po/tune.ko.po
branches/plus-SLE12-SP2/yast/ko/po/users.ko.po
branches/plus-SLE12-SP2/yast/ko/po/vm.ko.po
branches/plus-SLE12-SP2/yast/ko/po/wol.ko.po
Log:
from SLE12-SP2 plus Factory
Modified: branches/plus-SLE12-SP2/yast/ko/po/add-on-creator.ko.po
===================================================================
--- branches/plus-SLE12-SP2/yast/ko/po/add-on-creator.ko.po 2016-09-22 12:08:23 UTC (rev 96979)
+++ branches/plus-SLE12-SP2/yast/ko/po/add-on-creator.ko.po 2016-09-22 12:08:28 UTC (rev 96980)
@@ -1,12 +1,12 @@
-# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
-# This file is distributed under the same license as the package.
-#
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
msgid ""
msgstr ""
"Project-Id-Version: add-on-creator\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-09-09 15:04+0200\n"
-"PO-Revision-Date: 2016-08-16 13:43\n"
+"PO-Revision-Date: 2016-09-19 13:47\n"
"Last-Translator: Novell language \n"
"<dt>* Virtual server port is 21: ftp\n"
@@ -411,7 +561,9 @@
"\n"
"\n"
"</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n"
-"<p>This setting is used if checktype is external and is the command to be run to check the status of a real server. It should exit with status 0 if everything\n"
+"<p>This setting is used if checktype is external and is the command to be "
+"run to check the status of a real server. It should exit with status 0 if "
+"everything\n"
"is ok, or non-zero otherwise.\n"
"</p><p>Four parameters are passed to the script:\n"
"</p></dt><dt>* virtual server ip/firewall mark\n"
@@ -422,68 +574,105 @@
"\n"
"\n"
"<p><b><big>check port</big> =</b> <i>n</i>\n"
-"</p><p>Number of port to monitor. Sometimes check port differs from service port.\n"
+"</p><p>Number of port to monitor. Sometimes check port differs from service "
+"port.\n"
"</p><p>Default: port specified for each real server\n"
"\n"
"\n"
-"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n"
-"</p><p>This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by\n"
+"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\""
+"b>\n"
+"</p><p>This object will be requested each checkinterval seconds on each real "
+"server. The string must be inside quotes. Note that this string may be "
+"overridden by\n"
"an optional per real-server based request-string.\n"
-"</p><p>For a <small>DNS</small> check this should the name of an A record, or the address of a <small>PTR</small> record to look up.\n"
-"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL</small> query. The data returned is not checked, only that the answer is one or more\n"
+"</p><p>For a <small>DNS</small> check this should the name of an A record, "
+"or the address of a <small>PTR</small> record to look up.\n"
+"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL"
+"small> query. The data returned is not checked, only that the answer is one "
+"or more\n"
"rows. This is a required setting.\n"
-"</p><p>For a simpletcp check, this string is sent verbatim except any occurances of \n"
+"</p><p>For a simpletcp check, this string is sent verbatim except any "
+"occurances of \n"
" are replaced with a new line character.\n"
"\n"
"\n"
"</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n"
-"</p><p>If the requested result contains this <i>regexp to compare</i>, the real server is declared alive. The regexp must be inside quotes. Keep in mind that\n"
-"regexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an\n"
+"</p><p>If the requested result contains this <i>regexp to compare</i>, the "
+"real server is declared alive. The regexp must be inside quotes. Keep in "
+"mind that\n"
+"regexps are not plain strings and that you need to escape the special "
+"characters if they should as literals. Note that this regexp may be "
+"overridden by an\n"
"optional per real-server based receive regexp.\n"
-"</p><p>For a <small>DNS</small> check this should be any one the A record's addresses or any one of the <small>PTR</small> record's names.\n"
+"</p><p>For a <small>DNS</small> check this should be any one the A record's "
+"addresses or any one of the <small>PTR</small> record's names.\n"
"</p><p>For a MySQL check, the receive setting is not used.\n"
"\n"
"\n"
-"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n"
-"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the <small>URI</small> specified in the request-string. <small>GET</small> is the\n"
-"method used by default if the parameter is not set. If <small>HEAD</small> is used, the receive-string should be unset.\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD"
+"small></b>\n"
+"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the "
+"<small>URI</small> specified in the request-string. <small>GET</small> is "
+"the\n"
+"method used by default if the parameter is not set. If <small>HEAD</small> "
+"is used, the receive-string should be unset.\n"
"</p><p>Default: <small>GET</small>\n"
"\n"
"\n"
"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
-"</p><p>Used when using a negotiate check with <small>HTTP</small> or <small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> request. In the\n"
-"case of <small>HTTPS</small> this generally needs to match the common name of the <small>SSL</small> certificate. If not set then the host header will be\n"
-"derived from the request url for the real server if present. As a last resort the <small>IP</small> address of the real server will be used.\n"
+"</p><p>Used when using a negotiate check with <small>HTTP</small> or "
+"<small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> "
+"request. In the\n"
+"case of <small>HTTPS</small> this generally needs to match the common name "
+"of the <small>SSL</small> certificate. If not set then the host header will "
+"be\n"
+"derived from the request url for the real server if present. As a last "
+"resort the <small>IP</small> address of the real server will be used.\n"
"\n"
"\n"
"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
-"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log in.\n"
+"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , "
+"MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log "
+"in.\n"
"</p><p>For Radius the passwd is used for the attribute User-Name.\n"
-"</p><p>For <small>SIP</small> , the username is used as both the to and from address for an <small>OPTIONS</small> query.\n"
+"</p><p>For <small>SIP</small> , the username is used as both the to and from "
+"address for an <small>OPTIONS</small> query.\n"
"</p><p>Default:\n"
"</p></dt><dt>* <small>FTP:</small> Anonymous\n"
-"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the configuration\n"
-"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is derived as per the passwd option below.\n"
-"</dt><dt>* Otherwise: empty string, which denotes that case authentication will not be attempted.\n"
+"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the "
+"configuration\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is "
+"derived as per the passwd option below.\n"
+"</dt><dt>* Otherwise: empty string, which denotes that case authentication "
+"will not be attempted.\n"
"\n"
"\n"
"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
-"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
+"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , "
+"<small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
"<small>SIP</small> servers.\n"
"</p><p>For Radius the passwd is used for the attribute User-Password.\n"
"</p><p>Default:\n"
-"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where hostname is the environment variable <small>HOSTNAME</small> evaluated at run time, or sourced\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where "
+"hostname is the environment variable <small>HOSTNAME</small> evaluated at "
+"run time, or sourced\n"
"from uname if unset.\n"
-"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , MySQL, Oracle, and PostgreSQL this means that authentication will not be performed.\n"
+"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , "
+"MySQL, Oracle, and PostgreSQL this means that authentication will not be "
+"performed.\n"
"\n"
"\n"
"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
-"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by <b>receive</b> above) will be performed against. This\n"
+"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the "
+"database that the query (set by <b>receive</b> above) will be performed "
+"against. This\n"
"is a required setting.\n"
"\n"
"\n"
"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
-"</p><p>Secret to use for Radius servers, this is the secret used to perform an Access-Request with the username (set by <b>login</b> above) and passwd (set by\n"
+"</p><p>Secret to use for Radius servers, this is the secret used to perform "
+"an Access-Request with the username (set by <b>login</b> above) and passwd "
+"(set by\n"
"<b>passwd</b> above).\n"
"</p><p>Default: empty string\n"
"\n"
@@ -497,115 +686,193 @@
"\n"
"\n"
"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
-"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
+"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an "
+"information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
"</p><p>Default: \"wrr\"\n"
"\n"
"\n"
"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
-"</p><p>Protocol to be used. If the virtual is specified as an <small>IP</small> address and port then it must be one of tcp or udp. If a firewall mark then the\n"
+"</p><p>Protocol to be used. If the virtual is specified as an <small>IP"
+"small> address and port then it must be one of tcp or udp. If a firewall "
+"mark then the\n"
"protocol must be fwm.\n"
"</p><p>Default:\n"
-"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the port is not 53: tcp\n"
-"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is 53: udp\n"
+"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the "
+"port is not 53: tcp\n"
+"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is "
+"53: udp\n"
"</dt><dt>* Virtual is a firewall mark: fwm\n"
"</dt></dl>\n"
"\n"
"\n"
"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
-"</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
-"</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n"
-"</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n"
+"</p><p>Timeout in seconds for connect, external and ping checks. If the "
+"timeout is exceeded then the real server is declared dead.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>If undefined then the value of negotiatetimeout is used. "
+"negotiatetimeout is also a global value that may be overriden by a per-"
+"virtual setting.\n"
+"</p><p>If both checktimeout and negotiatetimeout are unset, the default is "
+"used.\n"
"</p><p>Default: 5 seconds\n"
"\n"
"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
"</p><p>Timeout in seconds for negotiate checks.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
-"</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n"
-"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is used.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>If undefined then the value of connecttimeout is used. connecttimeout "
+"is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is "
+"used.\n"
"</p><p>Default: 30 seconds\n"
"\n"
"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
-"</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>The number of consecutive times a failure will have to be reported by "
+"a check before the realserver is considered to have failed. A value of 1 "
+"will have the realserver considered failed on the first failure. A "
+"successful check will reset the failure counter to 0.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
"</p><p>Default: 1\n"
"\n"
"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
-"</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\n"
-"module MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>A valid email address for sending alerts about the changed connection "
+"status to any real server defined in the virtual service. This option "
+"requires perl\n"
+"module MailTools to be installed. Automatically tries to send email using "
+"any of the built-in methods. See perldoc Mail::Mailer for more info on "
+"methods.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
"\n"
"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
-"</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\n"
-"inhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\n"
+"</p><p>Delay in seconds between repeating email alerts while any given real "
+"server in the virtual service remains inaccessible. A setting of zero "
+"seconds will\n"
+"inhibit the repeating alerts. The email timing accuracy of this setting is "
+"dependent on the number of seconds defined in the checkinterval "
+"configuration\n"
"option.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
"</p><p>Default: 0\n"
"\n"
-"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
-"</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n"
-"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting"
+"b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>Comma delimited list of server states in which email alerts should be "
+"sent. <b>all</b> is a short-hand for\n"
+"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If "
+"<b>none</b> is specified, no other option may be specified, otherwise "
+"options are ORed\n"
"with each other.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
"</p><p>Default: all\n"
"\n"
-"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
-"</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|"
+"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>the server onto which a webservice is redirected if all real servers "
+"are down. Typically this would be 127.0.0.1 with an emergency page.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
"\n"
"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
-"</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\n"
-"Rather, their weight is set to zero which means that no new connections will be accepted.\n"
-"</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\n"
-"real server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n"
+"</p><p>If <i>yes</i>, then when real or failback servers are determined to "
+"be down, they are not actually removed from the kernel's <small>LVS</small> "
+"table.\n"
+"Rather, their weight is set to zero which means that no new connections will "
+"be accepted.\n"
+"</p><p>This has the side effect, that if the real server has persistent "
+"connections, new connections from any existing clients will continue to be "
+"routed to the\n"
+"real server, until the persistant timeout can expire. See ipvsadm for more "
+"information on persistant connections.\n"
"</p><p>This side-effect can be avoided by running the following:\n"
"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
-"</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\n"
-"old to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n"
-"</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
-"</p><p>If defined in a virtual server section then the global value is overridden.\n"
+"</p><p>If the proc file isn't present this probably means that the kernel "
+"doesn't have lvs support, <small>LVS</small> support isn't loaded, or the "
+"kernel is too\n"
+"old to have the proc file. Running ipvsadm as root should load <small>LVS"
+"small> into the kernel if it is possible.\n"
+"</p><p>If <i>no</i>, then the real or failback servers will be removed from "
+"the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
"</p><p>Default: <i>yes</i>\n"
"\n"
"\n"
"\n"
msgstr ""
"\n"
-"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|servicename)|firewall-mark</i>\n"
-"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename) 또는 firewall-mark로 가상 서비스를 정의합니다. firewall-mark는 0보다 큰 정수입니다.\n"
-"패킷 표시 구성은 <b>ipchains</b>(8)에 대한 <tt>\"-m\"</tt> 옵션을 사용하여 제어됩니다. 가상 서비스에 대한 모든 실제 서비스 및 플래그가\n"
+"<p><b><big>virtual server</big> =</b> <i>(ip_address|hostname:portnumber|"
+"servicename)|firewall-mark</i>\n"
+"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename) 또는 firewall-mark로 "
+"가상 서비스를 정의합니다. firewall-mark는 0보다 큰 정수입니다.\n"
+"패킷 표시 구성은 <b>ipchains</b>(8)에 대한 <tt>\"-m\"</tt> 옵션을 사용하여 제"
+"어됩니다. 가상 서비스에 대한 모든 실제 서비스 및 플래그가\n"
"이 줄 바로 뒤에 들여쓰기로 표시되어야 합니다.\n"
"\n"
"\n"
-"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->ip_address|hostname][:portnumber|servicename</i>]\n"
-"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request</i><b>\", \"</b><i>receive</i><b>\"</b>]\n"
-"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename)로 실제 서비스를 정의합니다. 포트가 생략된 경우 0이 사용되며, 주로 실제 서버의 포트가 무시되는\n"
-"fwmark 서비스에 사용됩니다. 선택적으로 <small>IP</small> 주소 범위(또는 두 개의 hostname)를 제공할 수 있으며, 이 경우\n"
-"범위의 각 <small>IP</small> 주소는 주어진 포트를 사용하는 실제 서버로 처리됩니다. 두 번째 인수는 전달 방법을 정의하며\n"
-"<b>gate</b>, <b>ipip</b> 또는 <b>masq</b>여야 합니다. 세 번째 인수는 선택 사항이며 실제 서버의 가중치를 정의합니다. 생략된 경우 가중치 1이\n"
-"사용됩니다. 마지막 두 인수도 선택 사항입니다. 두 인수는 서버가 활성 상태인지 확인하는 데 사용되는 요청-수신 쌍을 정의합니다. 가상 서버 섹션의 요청-수신 쌍을\n"
-"무효화합니다. 이러한 두 문자열은 따옴표로 묶어야 합니다. 요청 문자열이 http://...로 시작하는 경우 실제 서버의 IP 주소와 포트가\n"
+"</p><p><b><big>real servers</big> =</b> <i>ip_address|hostname[->"
+"ip_address|hostname][:portnumber|servicename</i>]\n"
+"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request"
+"i><b>\", \"</b><i>receive</i><b>\"</b>]\n"
+"</p><p>IP 주소(또는 hostname)와 포트(또는 servicename)로 실제 서비스를 정의합"
+"니다. 포트가 생략된 경우 0이 사용되며, 주로 실제 서버의 포트가 무시되는\n"
+"fwmark 서비스에 사용됩니다. 선택적으로 <small>IP</small> 주소 범위(또는 두 개"
+"의 hostname)를 제공할 수 있으며, 이 경우\n"
+"범위의 각 <small>IP</small> 주소는 주어진 포트를 사용하는 실제 서버로 처리됩"
+"니다. 두 번째 인수는 전달 방법을 정의하며\n"
+"<b>gate</b>, <b>ipip</b> 또는 <b>masq</b>여야 합니다. 세 번째 인수는 선택 사"
+"항이며 실제 서버의 가중치를 정의합니다. 생략된 경우 가중치 1이\n"
+"사용됩니다. 마지막 두 인수도 선택 사항입니다. 두 인수는 서버가 활성 상태인지 "
+"확인하는 데 사용되는 요청-수신 쌍을 정의합니다. 가상 서버 섹션의 요청-수신 쌍"
+"을\n"
+"무효화합니다. 이러한 두 문자열은 따옴표로 묶어야 합니다. 요청 문자열이 "
+"http://...로 시작하는 경우 실제 서버의 IP 주소와 포트가\n"
"무효화되고, 그렇지 않으면 실제 서버의 IP 주소와 포트가 사용됩니다.\n"
-"</p><p><small>TCP</small> 및 <small>UDP</small>(fwmark 아님) 가상 서비스의 경우 전달 방법이 masq이고 실제 서버의 <small>IP</small> 주소가\n"
-"비로컬(ldirectord를 실행하는 호스트의 인터페이스에 없음)인 경우가 아니면 실제 서버의 포트가 가상 서비스의 포트로\n"
-"설정됩니다. 즉, 실제 서버가 다른 컴퓨터이고 전달 방법이 masq인 경우에만 포트 매핑을 사용할 수 있습니다. 이는\n"
+"</p><p><small>TCP</small> 및 <small>UDP</small>(fwmark 아님) 가상 서비스의 경"
+"우 전달 방법이 masq이고 실제 서버의 <small>IP</small> 주소가\n"
+"비로컬(ldirectord를 실행하는 호스트의 인터페이스에 없음)인 경우가 아니면 실"
+"제 서버의 포트가 가상 서비스의 포트로\n"
+"설정됩니다. 즉, 실제 서버가 다른 컴퓨터이고 전달 방법이 masq인 경우에만 포트 "
+"매핑을 사용할 수 있습니다. 이는\n"
"커널의 기본 <small>LVS</small> 코드가 작동하는 방식 때문입니다.\n"
-"</p><p>이러한 항목이 가상 섹션 내에 두 개 이상 있을 수 있습니다. 위에 나열된 checktimeout, negotiatetimeout, failurecount, fallback, emailalert, emailalertfreq 및\n"
-"quiescent 옵션이 가상 섹션 내에 표시될 수도 있으며, 이 경우 전역 설정이 무효화됩니다.\n"
+"</p><p>이러한 항목이 가상 섹션 내에 두 개 이상 있을 수 있습니다. 위에 나열된 "
+"checktimeout, negotiatetimeout, failurecount, fallback, emailalert, "
+"emailalertfreq 및\n"
+"quiescent 옵션이 가상 섹션 내에 표시될 수도 있으며, 이 경우 전역 설정이 무효"
+"화됩니다.\n"
"\n"
"\n"
-"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate</b>|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n"
-"</p><p>수행할 확인 유형입니다. negotiate는 요청을 보내고 수신 문자열을 일치시킵니다. connect는 <small>TCP/IP</small> 연결만 설정하려고 하므로\n"
-"요청 및 수신 문자열을 생략할 수 있습니다. checktype이 숫자이면 각 N회 연결 시도 후에 협상 시도가 1회 수행되도록 negotiate 및 connect가\n"
-"조합됩니다. 서비스가 응답하는지 자주 확인하고 훨씬 긴 간격으로 negotiate 확인이 수행되는 경우에 유용합니다. ping은\n"
-"<small>ICMP</small> ping을 사용하여 실제 서버의 가용성을 테스트함을 의미합니다. ping은 <small>UDP</small> 서비스에 대한 연결 확인으로도 사용됩니다. off는\n"
-"확인이 수행되지 않으며 실제 또는 대체 서버가 활성화되지 않음을 의미합니다. on은 확인이 수행되지 않으며 실제 서버가 항상\n"
+"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate"
+"b>|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n"
+"</p><p>수행할 확인 유형입니다. negotiate는 요청을 보내고 수신 문자열을 일치시"
+"킵니다. connect는 <small>TCP/IP</small> 연결만 설정하려고 하므로\n"
+"요청 및 수신 문자열을 생략할 수 있습니다. checktype이 숫자이면 각 N회 연결 시"
+"도 후에 협상 시도가 1회 수행되도록 negotiate 및 connect가\n"
+"조합됩니다. 서비스가 응답하는지 자주 확인하고 훨씬 긴 간격으로 negotiate 확인"
+"이 수행되는 경우에 유용합니다. ping은\n"
+"<small>ICMP</small> ping을 사용하여 실제 서버의 가용성을 테스트함을 의미합니"
+"다. ping은 <small>UDP</small> 서비스에 대한 연결 확인으로도 사용됩니다. off"
+"는\n"
+"확인이 수행되지 않으며 실제 또는 대체 서버가 활성화되지 않음을 의미합니다. on"
+"은 확인이 수행되지 않으며 실제 서버가 항상\n"
"활성화됨을 의미합니다. 기본값은 <i>negotiate</i>입니다.\n"
"\n"
"\n"
-"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n"
-"</p><p>checktype=negotiate를 사용할 때 모니터링할 서비스 유형입니다. none은 모니터링되지 않는 서비스를 나타냅니다.\n"
-"</p><p>simpletcp는 <b>request</b> 문자열을 서버로 보내고 <b>receive</b> regexp에 대해 테스트합니다. 다른 유형의 확인은 지정된 프로토콜을 사용하여\n"
-"서버에 연결합니다. 프로토콜별 정보는 <b>request</b> 및 <b>receive</b> 섹션을 참조하십시오.\n"
+"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|"
+"<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|"
+"<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|"
+"<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n"
+"</p><p>checktype=negotiate를 사용할 때 모니터링할 서비스 유형입니다. none은 "
+"모니터링되지 않는 서비스를 나타냅니다.\n"
+"</p><p>simpletcp는 <b>request</b> 문자열을 서버로 보내고 <b>receive</b> "
+"regexp에 대해 테스트합니다. 다른 유형의 확인은 지정된 프로토콜을 사용하여\n"
+"서버에 연결합니다. 프로토콜별 정보는 <b>request</b> 및 <b>receive</b> 섹션을 "
+"참조하십시오.\n"
"</p><p>기본값:\n"
"</p>
\n"
"<dt>* 가상 서버 포트 21: ftp\n"
@@ -628,7 +895,8 @@
"\n"
"\n"
"</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n"
-"<p>이 설정은 checktype이 external인 경우에 유용하며 실제 서버의 상태를 확인하기 위해 실행할 명령입니다. 모두 정상이면 상태 0으로\n"
+"<p>이 설정은 checktype이 external인 경우에 유용하며 실제 서버의 상태를 확인하"
+"기 위해 실행할 명령입니다. 모두 정상이면 상태 0으로\n"
"종료되어야 하고, 그렇지 않으면 0이 아닌 값으로 종료되어야 합니다.\n"
"</p><p>다음 네 개의 파라미터가 스크립트에 전달됩니다.\n"
"</p></dt><dt>* 가상 서버 IP/방화벽 표시\n"
@@ -639,69 +907,96 @@
"\n"
"\n"
"<p><b><big>check port</big> =</b> <i>n</i>\n"
-"</p><p>모니터링할 포트 수입니다. 확인 포트가 서비스 포트와 다른 경우도 있습니다.\n"
+"</p><p>모니터링할 포트 수입니다. 확인 포트가 서비스 포트와 다른 경우도 있습니"
+"다.\n"
"</p><p>기본값: 각 실제 서버에 대해 지정된 포트\n"
"\n"
"\n"
-"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n"
-"</p><p>이 객체는 각 실제 서버에서 checkinterval 초마다 요청됩니다. 문자열은 따옴표로 묶어야 합니다. 실제 서버 기반의 선택적 요청 문자열로\n"
+"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\""
+"b>\n"
+"</p><p>이 객체는 각 실제 서버에서 checkinterval 초마다 요청됩니다. 문자열은 "
+"따옴표로 묶어야 합니다. 실제 서버 기반의 선택적 요청 문자열로\n"
"이 문자열을 무효화할 수 있습니다.\n"
-"</p><p><small>DNS</small> 확인의 경우 조회할 A 레코드의 이름 또는 <small>PTR</small> 레코드의 주소여야 합니다.\n"
-"</p><p>MySQL, Oracle 또는 PostgeSQL 확인의 경우 <small>SQL</small> 쿼리여야 합니다. 반환된 데이터는 확인되지 않고 응답이 하나 이상의 행인지만\n"
+"</p><p><small>DNS</small> 확인의 경우 조회할 A 레코드의 이름 또는 "
+"<small>PTR</small> 레코드의 주소여야 합니다.\n"
+"</p><p>MySQL, Oracle 또는 PostgeSQL 확인의 경우 <small>SQL</small> 쿼리여야 "
+"합니다. 반환된 데이터는 확인되지 않고 응답이 하나 이상의 행인지만\n"
"확인됩니다. 이는 필수 설정입니다.\n"
"</p><p>simpletcp 확인의 경우 \n"
" 발생이 줄 바꿈 문자로 바뀌는 것을 제외하고 이 문자열이 그대로 전송됩니다.\n"
"\n"
"\n"
"</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n"
-"</p><p>요청된 결과에 이 <i>regexp to compare</i>가 포함된 경우 실제 서버가 활성 상태로 선언됩니다. regexp는 따옴표로 묶어야 합니다.\n"
-"regexps는 일반 문자열이 아니며 리터럴로 사용되어야 하는 경우 특수 문자를 이스케이프해야 합니다. 이 regexp는 실제 서버 기반의 선택적\n"
+"</p><p>요청된 결과에 이 <i>regexp to compare</i>가 포함된 경우 실제 서버가 활"
+"성 상태로 선언됩니다. regexp는 따옴표로 묶어야 합니다.\n"
+"regexps는 일반 문자열이 아니며 리터럴로 사용되어야 하는 경우 특수 문자를 이스"
+"케이프해야 합니다. 이 regexp는 실제 서버 기반의 선택적\n"
"수신 regexp에 의해 무효화될 수 있습니다.\n"
-"</p><p><small>DNS</small> 확인의 경우 A 레코드의 주소 또는 <small>PTR</small> 레코드 이름 중 하나여야 합니다.\n"
+"</p><p><small>DNS</small> 확인의 경우 A 레코드의 주소 또는 <small>PTR"
+"small> 레코드 이름 중 하나여야 합니다.\n"
"</p><p>MySQL 확인의 경우 수신 설정이 사용되지 않습니다.\n"
"\n"
"\n"
-"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n"
-"</p><p>요청 문자열에 지정된 <small>URI</small>를 가져오기 위해 사용해야 하는 <small>HTTP</small> 메소드입니다. <small>GET</small>은\n"
-"파라미터가 설정되지 않은 경우 기본적으로 사용되는 메소드입니다. <small>HEAD</small>가 사용된 경우 수신 문자열을 설정하면 안 됩니다.\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD"
+"small></b>\n"
+"</p><p>요청 문자열에 지정된 <small>URI</small>를 가져오기 위해 사용해야 하는 "
+"<small>HTTP</small> 메소드입니다. <small>GET</small>은\n"
+"파라미터가 설정되지 않은 경우 기본적으로 사용되는 메소드입니다. <small>HEAD"
+"small>가 사용된 경우 수신 문자열을 설정하면 안 됩니다.\n"
"</p><p>기본값: <small>GET</small>\n"
"\n"
"\n"
"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
-"</p><p><small>HTTP</small> 또는 <small>HTTPS</small>와 함께 negotiate 확인을 사용하는 경우에 사용됩니다. <small>HTTP</small> 요청에 사용되는 호스트 헤더를 설정합니다.\n"
-"<small>HTTPS</small>의 경우 일반적으로 <small>SSL</small> 인증서의 일반 이름과 일치해야 합니다. 설정되지 않은 경우 실제 서버에 대한 요청 URL(있는 경우)에서\n"
-"호스트 헤더가 파생됩니다. 마지막 방법으로, 실제 서버의 <small>IP</small> 주소가 사용됩니다.\n"
+"</p><p><small>HTTP</small> 또는 <small>HTTPS</small>와 함께 negotiate 확인을 "
+"사용하는 경우에 사용됩니다. <small>HTTP</small> 요청에 사용되는 호스트 헤더"
+"를 설정합니다.\n"
+"<small>HTTPS</small>의 경우 일반적으로 <small>SSL</small> 인증서의 일반 이름"
+"과 일치해야 합니다. 설정되지 않은 경우 실제 서버에 대한 요청 URL(있는 경우)에"
+"서\n"
+"호스트 헤더가 파생됩니다. 마지막 방법으로, 실제 서버의 <small>IP</small> 주소"
+"가 사용됩니다.\n"
"\n"
"\n"
"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
-"</p><p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, Oracle, <small>POP</small> 및 PostgreSQL의 경우 로그인에 사용되는 사용자 이름입니다.\n"
+"</p><p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, "
+"Oracle, <small>POP</small> 및 PostgreSQL의 경우 로그인에 사용되는 사용자 이름"
+"입니다.\n"
"</p><p>Radius의 경우 User-Name 특성에 passwd가 사용됩니다.\n"
-"</p><p><small>SIP</small>의 경우 username이 <small>OPTIONS</small> 쿼리의 받는 사람 및 보낸 사람 주소 둘 다로 사용됩니다.\n"
+"</p><p><small>SIP</small>의 경우 username이 <small>OPTIONS</small> 쿼리의 받"
+"는 사람 및 보낸 사람 주소 둘 다로 사용됩니다.\n"
"</p><p>기본값:\n"
"</p></dt><dt>* <small>FTP:</small> Anonymous\n"
"</dt><dt>* MySQL Oracle 및 PostgreSQL: 구성에서 지정해야 함\n"
-"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, 아래 passwd 옵션을 기준으로 hostname이 파생됨\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, 아래 passwd 옵션"
+"을 기준으로 hostname이 파생됨\n"
"</dt><dt>* 기타: 빈 문자열. 인증이 시도되지 않음을 의미합니다.\n"
"\n"
"\n"
"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
-"<p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, Oracle, <small>POP</small>, PostgreSQL 및\n"
+"<p><small>FTP</small>, <small>IMAP</small>, <small>LDAP</small>, MySQL, "
+"Oracle, <small>POP</small>, PostgreSQL 및\n"
"<small>SIP</small> 서버 로그인에 사용할 비밀번호입니다.\n"
"</p><p>Radius의 경우 User-Password 특성에 passwd가 사용됩니다.\n"
"</p><p>기본값:\n"
-"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, 여기서 hostname은 런타임에 평가되거나 설정되지 않은 경우 uname에서 소싱되는 환경 변수\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, 여기서 "
+"hostname은 런타임에 평가되거나 설정되지 않은 경우 uname에서 소싱되는 환경 변"
+"수\n"
"<small>HOSTNAME</small>입니다.\n"
-"</dt><dt>* 기타: 빈 문자열. <small>LDAP</small>, MySQL, Oracle 및 PostgreSQL의 경우 인증이 수행되지 않음을 의미합니다.\n"
+"</dt><dt>* 기타: 빈 문자열. <small>LDAP</small>, MySQL, Oracle 및 PostgreSQL"
+"의 경우 인증이 수행되지 않음을 의미합니다.\n"
"\n"
"\n"
"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
-"<p>MySQL, Oracle 및 PostgreSQL 서버에 사용할 데이터베이스입니다. 위의 <b>receive</b>에서 설정된 쿼리를 수행할 데이터베이스입니다. 이는\n"
+"<p>MySQL, Oracle 및 PostgreSQL 서버에 사용할 데이터베이스입니다. 위의 "
+"<b>receive</b>에서 설정된 쿼리를 수행할 데이터베이스입니다. 이는\n"
"필수 설정입니다.\n"
"\n"
"\n"
"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
-"</p><p>Radius 서버에 사용할 비밀입니다. 위의 <b>login</b>에서 설정된 username 및 위의\n"
-"<b>passwd</b>에서 설정된 passwd로 Access-Request를 수행하는 데 사용되는 비밀입니다.\n"
+"</p><p>Radius 서버에 사용할 비밀입니다. 위의 <b>login</b>에서 설정된 "
+"username 및 위의\n"
+"<b>passwd</b>에서 설정된 passwd로 Access-Request를 수행하는 데 사용되는 비밀"
+"입니다.\n"
"</p><p>기본값: 빈 문자열\n"
"\n"
"\n"
@@ -714,191 +1009,219 @@
"\n"
"\n"
"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
-"</p><p>부하 분산을 위해 <small>LVS</small>에서 사용할 스케줄러입니다. 사용 가능한 스케줄러에 대한 자세한 내용은 <b>ipvsadm</a></b>(8) 매뉴얼 페이지를 참조하십시오.\n"
+"</p><p>부하 분산을 위해 <small>LVS</small>에서 사용할 스케줄러입니다. 사용 가"
+"능한 스케줄러에 대한 자세한 내용은 <b>ipvsadm</a></b>(8) "
+"매뉴얼 페이지를 참조하십시오.\n"
"</p><p>기본값: \"wrr\"\n"
"\n"
"\n"
"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
-"</p><p>사용할 프로토콜입니다. virtual이 <small>IP</small> 주소 및 포트로 지정된 경우 tcp 또는 udp 중 하나여야 합니다. firewall mark인 경우\n"
+"</p><p>사용할 프로토콜입니다. virtual이 <small>IP</small> 주소 및 포트로 지정"
+"된 경우 tcp 또는 udp 중 하나여야 합니다. firewall mark인 경우\n"
"protocol은 fwm이어야 합니다.\n"
"</p><p>기본값:\n"
-"</p></dt><dt>* Virtual이 <small>IP</small> 주소 및 포트이고 포트가 53: tcp가 아님\n"
+"</p></dt><dt>* Virtual이 <small>IP</small> 주소 및 포트이고 포트가 53: tcp가 "
+"아님\n"
"</dt><dt>* Virtual이 <small>IP</small> 주소 및 포트이고 포트가 53: udp임\n"
"</dt><dt>* Virtual이 firewall mark: fwm임\n"
"</dt></dl>\n"
"\n"
"\n"
"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
-"</p><p>connect, external 및 ping 확인 제한 시간(초)입니다. 제한 시간을 초과한 경우 실제 서버가 비가동 상태로 선언됩니다.\n"
+"</p><p>connect, external 및 ping 확인 제한 시간(초)입니다. 제한 시간을 초과"
+"한 경우 실제 서버가 비가동 상태로 선언됩니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 설정이 무효화됩니다.\n"
-"</p><p>정의되지 않은 경우 negotiatetimeout 값이 사용됩니다. negotiatetimeout도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n"
-"</p><p>checktimeout 및 negotiatetimeout이 둘 다 설정되지 않은 경우 기본값이 사용됩니다.\n"
+"</p><p>정의되지 않은 경우 negotiatetimeout 값이 사용됩니다. negotiatetimeout"
+"도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n"
+"</p><p>checktimeout 및 negotiatetimeout이 둘 다 설정되지 않은 경우 기본값이 "
+"사용됩니다.\n"
"</p><p>기본값: 5초\n"
"\n"
"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
"</p><p>negotiate 확인에 대한 제한 시간(초)입니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
-"</p><p>정의되지 않은 경우 connecttimeout 값이 사용됩니다. connecttimeout도 가상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n"
-"</p><p>negotiatetimeout 및 connecttimeout이 둘 다 설정되지 않은 경우 기본값이 사용됩니다.\n"
+"</p><p>정의되지 않은 경우 connecttimeout 값이 사용됩니다. connecttimeout도 가"
+"상별 설정에 의해 무효화될 수 있는 전역 값입니다.\n"
+"</p><p>negotiatetimeout 및 connecttimeout이 둘 다 설정되지 않은 경우 기본값"
+"이 사용됩니다.\n"
"</p><p>기본값: 30초\n"
"\n"
"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
-"</p><p>실제 서버가 실패한 것으로 간주되기 전에 확인에서 실패를 보고해야 하는 연속 횟수입니다. 값이 1이면 처음 실패 시 실제 서버가 실패한 것으로 간주됩니다. 성공적으로 확인되면 실패 카운터가 0으로 재설정됩니다.\n"
+"</p><p>실제 서버가 실패한 것으로 간주되기 전에 확인에서 실패를 보고해야 하는 "
+"연속 횟수입니다. 값이 1이면 처음 실패 시 실제 서버가 실패한 것으로 간주됩니"
+"다. 성공적으로 확인되면 실패 카운터가 0으로 재설정됩니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
"</p><p>기본값: 1\n"
"\n"
"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
-"</p><p>가상 서비스에 정의된 실제 서버에 변경된 연결 상태에 대한 경고를 보내기 위한 유효한 전자 메일 주소입니다. 이 옵션을 사용하려면 perl\n"
-"모듈 MailTools를 설치해야 합니다. 기본 제공 방법을 사용하여 자동으로 전자 메일 전송을 시도합니다. 방법에 대한 자세한 내용은 perldoc Mail::Mailer를 참조하십시오.\n"
+"</p><p>가상 서비스에 정의된 실제 서버에 변경된 연결 상태에 대한 경고를 보내"
+"기 위한 유효한 전자 메일 주소입니다. 이 옵션을 사용하려면 perl\n"
+"모듈 MailTools를 설치해야 합니다. 기본 제공 방법을 사용하여 자동으로 전자 메"
+"일 전송을 시도합니다. 방법에 대한 자세한 내용은 perldoc Mail::Mailer를 참조하"
+"십시오.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
"\n"
"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
-"</p><p>가상 서비스에 지정된 실제 서버에 액세스할 수 없는 동안 반복되는 전자 메일 경고 사이의 지연(초)입니다. 0초를 설정하면\n"
-"반복 경고가 사용되지 않습니다. 이 설정의 전자 메일 타이밍 정확도는 checkinterval 구성 옵션에 정의된 시간(초)에 따라\n"
+"</p><p>가상 서비스에 지정된 실제 서버에 액세스할 수 없는 동안 반복되는 전자 "
+"메일 경고 사이의 지연(초)입니다. 0초를 설정하면\n"
+"반복 경고가 사용되지 않습니다. 이 설정의 전자 메일 타이밍 정확도는 "
+"checkinterval 구성 옵션에 정의된 시간(초)에 따라\n"
"달라집니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
"</p><p>기본값: 0\n"
"\n"
-"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
-"</p><p>전자 메일 경고가 전송되어야 하는 서버 상태의 쉼표로 구분된 목록입니다. <b>all</b>은\n"
-"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\"을 나타냅니다. <b>none</b>이 지정된 경우 다른 옵션을 지정할 수 없습니다. 그렇지 않으면 옵션은 서로 or로\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting"
+"b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>전자 메일 경고가 전송되어야 하는 서버 상태의 쉼표로 구분된 목록입니"
+"다. <b>all</b>은\n"
+"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\"을 나타냅"
+"니다. <b>none</b>이 지정된 경우 다른 옵션을 지정할 수 없습니다. 그렇지 않으"
+"면 옵션은 서로 or로\n"
"연결됩니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
"</p><p>기본값: all\n"
"\n"
-"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
-"</p><p>실제 서버가 모두 다운된 경우 웹 서비스가 리디렉션되는 서버입니다. 일반적으로 응급 페이지가 있는 127.0.0.1입니다.\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|"
+"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>실제 서버가 모두 다운된 경우 웹 서비스가 리디렉션되는 서버입니다. 일반"
+"적으로 응급 페이지가 있는 127.0.0.1입니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
"\n"
"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
-"</p><p><i>yes</i>인 경우 실제 또는 대체 서버가 다운된 것이 확인될 때 실제로 커널의 <small>LVS</small> 테이블에서 제거되지 않습니다.\n"
+"</p><p><i>yes</i>인 경우 실제 또는 대체 서버가 다운된 것이 확인될 때 실제로 "
+"커널의 <small>LVS</small> 테이블에서 제거되지 않습니다.\n"
"대신 가중치가 0으로 설정되어 새 연결이 수락되지 않습니다.\n"
-"</p><p>이 경우 실제 서버에 영구적 연결이 있으면 영구적 제한 시간이 만료될 때까지 기존 클라이언트의 새 연결이 계속 실제 서버로 \n"
-"라우팅되는 부작용이 있습니다. 영구적 연결에 대한 자세한 내용은 ipvsadm을 참조하십시오.\n"
+"</p><p>이 경우 실제 서버에 영구적 연결이 있으면 영구적 제한 시간이 만료될 때"
+"까지 기존 클라이언트의 새 연결이 계속 실제 서버로 \n"
+"라우팅되는 부작용이 있습니다. 영구적 연결에 대한 자세한 내용은 ipvsadm을 참조"
+"하십시오.\n"
"</p><p>다음을 실행하면 이 부작용을 방지할 수 있습니다.\n"
"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
-"</p><p>proc 파일이 없는 경우 커널에 lvs 지원이 없거나, <small>LVS</small> 지원이 로드되지 않았거나, 커널이 너무 오래되어\n"
-"proc 파일을 포함할 수 없음을 의미합니다. 루트로 ipvsadm을 실행할 경우 가능하면 <small>LVS</small>가 커널에 로드되어야 합니다.\n"
-"</p><p><i>no</i>인 경우 실제 또는 대체 서버가 커널의 <small>LVS</small> 테이블에서 제거됩니다. 기본값은 <i>yes</i>입니다.\n"
+"</p><p>proc 파일이 없는 경우 커널에 lvs 지원이 없거나, <small>LVS</small> 지"
+"원이 로드되지 않았거나, 커널이 너무 오래되어\n"
+"proc 파일을 포함할 수 없음을 의미합니다. 루트로 ipvsadm을 실행할 경우 가능하"
+"면 <small>LVS</small>가 커널에 로드되어야 합니다.\n"
+"</p><p><i>no</i>인 경우 실제 또는 대체 서버가 커널의 <small>LVS</small> 테이"
+"블에서 제거됩니다. 기본값은 <i>yes</i>입니다.\n"
"</p><p>가상 서버 섹션에서 정의된 경우 전역 값이 무효화됩니다.\n"
"</p><p>기본값: <i>yes</i>\n"
"\n"
"\n"
"\n"
-#. overwrite global value part
-#: src/include/iplb/vserver_conf.rb:146
+#. overwrite global value part
+#: src/include/iplb/vserver_conf.rb:146
msgid "Check Type"
msgstr "확인 유형"
-#: src/include/iplb/vserver_conf.rb:150
+#: src/include/iplb/vserver_conf.rb:150
msgid "Check Port"
msgstr "확인 포트"
-#: src/include/iplb/vserver_conf.rb:151
+#: src/include/iplb/vserver_conf.rb:151
msgid "Service"
msgstr "서비스"
-#: src/include/iplb/vserver_conf.rb:152
+#: src/include/iplb/vserver_conf.rb:152
msgid "Check Command"
msgstr "확인 명령"
-#: src/include/iplb/vserver_conf.rb:157
+#: src/include/iplb/vserver_conf.rb:157
msgid "Http Method"
msgstr "HTTP 메소드"
-#: src/include/iplb/vserver_conf.rb:160
+#: src/include/iplb/vserver_conf.rb:160
msgid "Request"
msgstr "요청"
-#: src/include/iplb/vserver_conf.rb:162
+#: src/include/iplb/vserver_conf.rb:162
msgid "Receive"
msgstr "받기"
-#: src/include/iplb/vserver_conf.rb:165
+#: src/include/iplb/vserver_conf.rb:165
msgid "Virtual Host"
msgstr "가상 호스트"
-#: src/include/iplb/vserver_conf.rb:177
+#: src/include/iplb/vserver_conf.rb:177
msgid "Login"
msgstr "로그인"
-#: src/include/iplb/vserver_conf.rb:178
+#: src/include/iplb/vserver_conf.rb:178
msgid "Password"
msgstr "비밀번호"
-#: src/include/iplb/vserver_conf.rb:180
+#: src/include/iplb/vserver_conf.rb:180
msgid "Database Name"
msgstr "데이터베이스 이름"
-#: src/include/iplb/vserver_conf.rb:181
+#: src/include/iplb/vserver_conf.rb:181
msgid "Radius Secret"
msgstr "Radius 비밀"
-#: src/include/iplb/vserver_conf.rb:199
+#: src/include/iplb/vserver_conf.rb:199
msgid "Persistent"
msgstr "지속"
-#: src/include/iplb/vserver_conf.rb:200
+#: src/include/iplb/vserver_conf.rb:200
msgid "Netmask"
msgstr "넷마스크"
-#: src/include/iplb/vserver_conf.rb:202
+#: src/include/iplb/vserver_conf.rb:202
msgid "Scheduler"
msgstr "스케줄러"
-#: src/include/iplb/vserver_conf.rb:211
+#: src/include/iplb/vserver_conf.rb:211
msgid "Protocol"
msgstr "프로토콜"
-#: src/include/iplb/vserver_conf.rb:231
+#: src/include/iplb/vserver_conf.rb:231
msgid "Virtual Servers"
msgstr "가상 서버"
-#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
+#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
msgid "Add"
msgstr "추가"
-#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
+#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
msgid "Edit"
msgstr "편집"
-#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
+#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
msgid "Delete"
msgstr "삭제"
-#. disable the delete & edit button if vserver box is empty
-#: src/include/iplb/vserver_conf.rb:296
+#. disable the delete & edit button if vserver box is empty
+#: src/include/iplb/vserver_conf.rb:296
msgid "Virtual Server"
msgstr "가상 서버"
-#: src/include/iplb/vserver_conf.rb:298
+#: src/include/iplb/vserver_conf.rb:298
msgid "Real Servers"
msgstr "실제 서버"
-#: src/include/iplb/vserver_conf.rb:310
+#: src/include/iplb/vserver_conf.rb:310
msgid "Check type"
msgstr "확인 유형"
-#: src/include/iplb/vserver_conf.rb:311
+#: src/include/iplb/vserver_conf.rb:311
msgid "Auth type"
msgstr "인증 유형"
-#: src/include/iplb/vserver_conf.rb:312
+#: src/include/iplb/vserver_conf.rb:312
msgid "Others"
msgstr "기타"
-#. return `cacel or a string
-#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
+#. return `cacel or a string
+#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
msgid "OK"
msgstr "확인"
-#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
+#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
msgid "Cancel"
msgstr "취소"
-#. split the real server ip value;
-#: src/include/iplb/vserver_conf.rb:411
+#. split the real server ip value;
+#: src/include/iplb/vserver_conf.rb:411
msgid ""
"If using IPv6,the format should like this\n"
"[fe80::5054:ff:fe00:2]"
@@ -906,98 +1229,98 @@
"IPv6을 사용하는 경우 형식은 다음과 같습니다.\n"
"[fe80::5054:ff:fe00:2]"
-#: src/include/iplb/vserver_conf.rb:413
+#: src/include/iplb/vserver_conf.rb:413
msgid "Real Server's IP Address"
msgstr "실제 서버의 IP 주소"
-#: src/include/iplb/vserver_conf.rb:419
+#: src/include/iplb/vserver_conf.rb:419
msgid "Forward Method"
msgstr "전달 방법"
-#: src/include/iplb/vserver_conf.rb:422
+#: src/include/iplb/vserver_conf.rb:422
msgid "weight"
msgstr "가중치"
-#. find next ]
-#: src/include/iplb/vserver_conf.rb:456
+#. find next ]
+#: src/include/iplb/vserver_conf.rb:456
msgid "IP address is not Valid"
msgstr "IP 주소가 잘못되었습니다."
-#. tab switch events end
-#: src/include/iplb/vserver_conf.rb:547
+#. tab switch events end
+#: src/include/iplb/vserver_conf.rb:547
msgid "Add a new real server:"
msgstr "새로운 실제 서버 추가:"
-#: src/include/iplb/vserver_conf.rb:564
+#: src/include/iplb/vserver_conf.rb:564
msgid "Edit the real server:"
msgstr "실제 서버 편집:"
-#. Initialization dialog contents
-#: src/include/iplb/wizards.rb:142
+#. Initialization dialog contents
+#: src/include/iplb/wizards.rb:142
msgid "Initializing..."
msgstr "초기화 중..."
-#. Read all iplb settings
-#. @return true on success
-#: src/modules/Iplb.rb:214
+#. Read all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:214
msgid "Initializing IPLB Configuration"
msgstr "IPLB 구성 초기화"
-#. Names of real stages
-#: src/modules/Iplb.rb:221
+#. Names of real stages
+#: src/modules/Iplb.rb:221
msgid "Read the global settings"
msgstr "전역 설정 읽기"
-#: src/modules/Iplb.rb:221
+#: src/modules/Iplb.rb:221
msgid "Read the virtual host settings"
msgstr "가상 호스트 설정 읽기"
-#: src/modules/Iplb.rb:223
+#: src/modules/Iplb.rb:223
msgid "Reading the global settings..."
msgstr "전역 설정을 읽는 중입니다."
-#: src/modules/Iplb.rb:224
+#: src/modules/Iplb.rb:224
msgid "Reading the virtual host settings..."
msgstr "가상 호스트 설정을 읽는 중입니다."
-#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
+#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
msgid "Finished"
msgstr "완료됨"
-#. Write all iplb settings
-#. @return true on success
-#: src/modules/Iplb.rb:320
+#. Write all iplb settings
+#. @return true on success
+#: src/modules/Iplb.rb:320
msgid "Saving IPLB Configuration"
msgstr "IPLB 구성 저장"
-#: src/modules/Iplb.rb:326
+#: src/modules/Iplb.rb:326
msgid "Write the settings"
msgstr "세팅 기록"
-#: src/modules/Iplb.rb:326
+#: src/modules/Iplb.rb:326
msgid "Run SuSEconfig"
msgstr "SuSEconfig 실행"
-#: src/modules/Iplb.rb:328
+#: src/modules/Iplb.rb:328
msgid "Writing the settings..."
msgstr "세팅을 기록하고 있습니다..."
-#: src/modules/Iplb.rb:329
+#: src/modules/Iplb.rb:329
msgid "Running SuSEconfig..."
msgstr "SuSEconfig 실행중입니다..."
-#. write global conf
-#. check for ipv6 address to decide whether to add "6=" or "="
-#. string key's format
-#. 192.168.6.241:89 or [2001:db8::5]:119
-#. only extract the 2001:db8::5 part from the key string
-#. to check whether it is an ipv6 address;
-#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
+#. write global conf
+#. check for ipv6 address to decide whether to add "6=" or "="
+#. string key's format
+#. 192.168.6.241:89 or [2001:db8::5]:119
+#. only extract the 2001:db8::5 part from the key string
+#. to check whether it is an ipv6 address;
+#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
msgid "Cannot write settings."
msgstr "설정을 기록할 수 없습니다."
-#. TODO FIXME: your code here...
-#. Configuration summary text for autoyast
-#: src/modules/Iplb.rb:441
+#. TODO FIXME: your code here...
+#. Configuration summary text for autoyast
+#: src/modules/Iplb.rb:441
msgid "Configuration summary..."
msgstr "구성 요약..."
Modified: branches/plus-SLE12-SP2/yast/ko/po/iscsi-client.ko.po
===================================================================
--- branches/plus-SLE12-SP2/yast/ko/po/iscsi-client.ko.po 2016-09-22 12:08:23 UTC (rev 96979)
+++ branches/plus-SLE12-SP2/yast/ko/po/iscsi-client.ko.po 2016-09-22 12:08:28 UTC (rev 96980)
@@ -1,12 +1,12 @@
-# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
-# This file is distributed under the same license as the package.
-#
+# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
+# This file is distributed under the same license as the package.
+#
msgid ""
msgstr ""
"Project-Id-Version: iscsi-client\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2016-09-09 15:05+0200\n"
-"PO-Revision-Date: 2016-08-16 13:43\n"
+"PO-Revision-Date: 2016-09-19 13:48\n"
"Last-Translator: Novell language
participants (1)
-
keichwa@svn2.opensuse.org