Author: keichwa Date: 2016-07-04 10:45:41 +0200 (Mon, 04 Jul 2016) New Revision: 95982 Added: branches/plus-SLE12-SP2/yast/tr/po/journalctl.tr.po branches/plus-SLE12-SP2/yast/tr/po/kernel-update-tool.tr.po branches/plus-SLE12-SP2/yast/tr/po/linux-user-mgmt.tr.po branches/plus-SLE12-SP2/yast/tr/po/migration.tr.po branches/plus-SLE12-SP2/yast/tr/po/s390.tr.po branches/plus-SLE12-SP2/yast/tr/po/smt.tr.po branches/plus-SLE12-SP2/yast/tr/po/xpram.tr.po Log: from SLE12-SP2 plus Factory Added: branches/plus-SLE12-SP2/yast/tr/po/journalctl.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/journalctl.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/journalctl.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,152 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2016-05-06 16:58+0200\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#. Header +#: src/lib/journalctl/entries_dialog.rb:62 +#, fuzzy +#| msgid "&Countries" +msgid "Journal entries" +msgstr "&Ülkeler" + +#. Filters +#: src/lib/journalctl/entries_dialog.rb:67 +msgid "Displaying entries with the following text" +msgstr "" + +#. Footer buttons +#: src/lib/journalctl/entries_dialog.rb:81 +#, fuzzy +#| msgid "Customi&ze Filter..." +msgid "Change filter..." +msgstr "F&iltreyi özelleştir..." + +#: src/lib/journalctl/entries_dialog.rb:83 +#, fuzzy +#| msgid "&Refresh" +msgid "Refresh" +msgstr "&Tazele" + +# classnames.ycp:193 +#. Header +#: src/lib/journalctl/query_dialog.rb:85 +#, fuzzy +#| msgid "Braille display" +msgid "Entries to display" +msgstr "Braille görüntü" + +# clients/rc_config_step1.ycp:253 +#. Boot selector +#: src/lib/journalctl/query_dialog.rb:89 +#, fuzzy +#| msgid "No entries found" +msgid "Log entries for" +msgstr "Girdi bulunamadı" + +#. Filter checkboxes +#: src/lib/journalctl/query_dialog.rb:96 +#, fuzzy +#| msgid "&Filter" +msgid "Filters" +msgstr "&Filtre" + +#. User readable description of the current filters +#: src/lib/journalctl/query_presenter.rb:60 +msgid "from previous boot" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:62 +msgid "since system's boot" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:66 +msgid "unit (%s)" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:67 +msgid "file (%s)" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:68 +#, fuzzy +#| msgid "Priority" +msgid "priority (%s)" +msgstr "Öncelik" + +# clients/lan_inetd_custom.ycp:156 +#: src/lib/journalctl/query_presenter.rb:79 +#, fuzzy +#| msgid "Edit additional services" +msgid "with no additional conditions" +msgstr "Ek hizmetleri düzenle" + +#: src/lib/journalctl/query_presenter.rb:81 +msgid "filtering by %s" +msgstr "" + +#. Possible options for the :boot filter to be used in forms +#. +#. @return [Array<Hash>] each option is represented by a hash with two keys +#. :value and :label +#: src/lib/journalctl/query_presenter.rb:93 +msgid "Since system's boot" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:94 +msgid "From previous boot" +msgstr "" + +#. Possible filters (in addition to :boot) to be used in forms +#. +#. @return [Array<Hash>] for each filter there are 3 possible keys +#. * :name name of the filter +#. * :label label for the widget used to set the filter +#. * :values optional list of valid values +#: src/lib/journalctl/query_presenter.rb:108 +msgid "For this systemd unit" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:112 +msgid "For this file (executable or device)" +msgstr "" + +#: src/lib/journalctl/query_presenter.rb:116 +msgid "With at least this priority" +msgstr "" + +# classnames.ycp:73 +#. Fields to display for listing the entries +#. +#. @return [Array<Hash>] for each column a :label and a :method is provided +#: src/lib/journalctl/query_presenter.rb:128 +msgid "Time" +msgstr "Süre" + +# clients/hwinfo.ycp:54 +#: src/lib/journalctl/query_presenter.rb:129 +msgid "Source" +msgstr "Kaynak" + +#: src/lib/journalctl/query_presenter.rb:130 +#, fuzzy +#| msgid "Messages" +msgid "Message" +msgstr "İletiler" Added: branches/plus-SLE12-SP2/yast/tr/po/kernel-update-tool.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/kernel-update-tool.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/kernel-update-tool.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,38 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2013-01-30 16:25+0100\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +# include/ui/common_messages.ycp:91 +#: src/clients/kernel-update.ycp:209 +msgid "Warning" +msgstr "Uyarı" + +#: src/clients/kernel-update.ycp:210 +msgid "Abort the kernel upgrade?" +msgstr "Kernel güncellemesi durdurulsun mu?" + +#: src/clients/kernel-update.ycp:267 +msgid "Alternate Download Location" +msgstr "Diğer dosya indirme yeri" + +#: src/clients/kernel-update.ycp:530 +msgid "Kernel Update Status Log" +msgstr "Kernel güncelleme durum kaydı" Added: branches/plus-SLE12-SP2/yast/tr/po/linux-user-mgmt.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/linux-user-mgmt.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/linux-user-mgmt.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,821 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2008-09-18 13:06+0200\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +# include/ui/file_popups.ycp:84 include/ui/file_popups.ycp:125 include/ui/file_popups.ycp:136 include/ui/file_popups.ycp:178 include/ui/file_popups.ycp:227 include/ui/file_popups.ycp:267 include/ui/file_popups.ycp:277 include/ui/file_popups.ycp:319 +#: src/EdirUtilsLUM.ycp:207 +#, fuzzy +#| msgid "Searching in directory: " +msgid "Searching for eDirectory trees" +msgstr "Şu dizinde aranıyor: " + +#: src/EdirUtilsLUM.ycp:208 +msgid "This may take a while" +msgstr "Bu işlem uzun sürebilir" + +#: src/EdirUtilsLUM.ycp:477 +#, ycp-format +msgid "%1 is an invalid fully distinguished name. The name must be typeful (e.g. cn=admin,o=acme or o=acme)" +msgstr "" + +# include/nis_server/ui.ycp:81 include/nis_server/ui.ycp:132 +#. LinuxUserMgmt read dialog caption +#: src/LinuxUserMgmt.ycp:90 +#, fuzzy +#| msgid "Initializing NIS server setup" +msgid "Initializing Linux User Management" +msgstr "NIS sunucu kurulumu başlatılıyor" + +#. Progress stage 1/3 +#: src/LinuxUserMgmt.ycp:102 +msgid "Read the database" +msgstr "Veri tabanını oku" + +# clients/inst_sw_single.ycp:742 +#: src/LinuxUserMgmt.ycp:103 src/LinuxUserMgmt.ycp:107 +#, fuzzy +#| msgid "Checking Dependencies..." +msgid "Checking dependencies" +msgstr "Bağımlılıklar kontrol ediliyor..." + +#. Progress step 1/3 +#: src/LinuxUserMgmt.ycp:106 +msgid "Reading the database..." +msgstr "Veri tabanı okunuyor..." + +# clients/lan_inetd.ycp:54 clients/lan_inetd_custom.ycp:792 clients/lan_inetd_start.ycp:146 clients/lan_inetd_start.ycp:158 +#. Progress finished +#: src/LinuxUserMgmt.ycp:109 src/LinuxUserMgmt.ycp:246 +#: src/LinuxUserMgmt.ycp:282 +msgid "Finished" +msgstr "Sonlandı" + +#: src/LinuxUserMgmt.ycp:166 +#, ycp-format +msgid "" +"It appears that %1 has already been configured. \n" +"Continue configuration?" +msgstr "" + +# +# clients/cups.ycp:147 +#. y2debug("LINUXUSTERMANAGEMENT READ EDIR:%1", Edirectory::EdirSettings); +#. y2debug("LINUXUSTERMANAGEMENT READ LDAP:%1", Edirectory::LDAPSettings); +#. Error message +#: src/LinuxUserMgmt.ycp:212 +msgid "Cannot read the database1." +msgstr "Veritabanı okunamıyor." + +#. LinuxUserMgmt read dialog caption +#: src/LinuxUserMgmt.ycp:261 +#, fuzzy +#| msgid "Saving Language Configuration" +msgid "Saving Linux User Management Configuration" +msgstr "Dil Yapılandırması Kaydediliyor" + +#. Progress stage 1/2 +#: src/LinuxUserMgmt.ycp:273 +msgid "Write the settings" +msgstr "Ayarları yaz" + +#. Progress stage 2/2 +#: src/LinuxUserMgmt.ycp:275 +msgid "Run SuSEconfig" +msgstr "SuSEconfig'i çalıştır" + +#. Progress step 1/2 +#: src/LinuxUserMgmt.ycp:278 +msgid "Writing the settings..." +msgstr "Ayarlar yazılıyor..." + +#. Progress step 2/2 +#: src/LinuxUserMgmt.ycp:280 +msgid "Running SuSEconfig..." +msgstr "SuSEconfig çalıştırılıyor..." + +# include/ui/common_messages.ycp:99 +#: src/LinuxUserMgmt.ycp:391 +#, fuzzy +#| msgid "Please wait..." +msgid "Please Wait" +msgstr "Lütfen bekleyin..." + +#: src/LinuxUserMgmt.ycp:391 +#, fuzzy +#| msgid "This may take a while..." +msgid "Running namconfig for LUM, this may take a while..." +msgstr "Bu işlem biraz sürecektir..." + +#. Error message +#: src/LinuxUserMgmt.ycp:421 +#, ycp-format +msgid "" +"Unable to connect to LDAP server %1 or the\n" +"specified user %2 does not have enough\n" +"privileges to configure Linux User Management.\n" +"Please correct the problem and re-run namconfig\n" +"after the install." +msgstr "" + +#. Error message +#: src/LinuxUserMgmt.ycp:554 +msgid "Cannot write settings." +msgstr "Ayarlar yazılamıyor." + +#. Error message +#: src/LinuxUserMgmt.ycp:561 +msgid "SuSEconfig script failed." +msgstr "SuSEconfig komut dosyası başarısız oldu." + +#: src/LinuxUserMgmt.ycp:676 +#, ycp-format +msgid "LDAP admin name with context: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:680 src/LinuxUserMgmt.ycp:682 +#, fuzzy, ycp-format +#| msgid "Server &IP Address:" +msgid "LDAP server IP Address: %1" +msgstr "Sunucu &IP adresi:" + +#: src/LinuxUserMgmt.ycp:684 +#, fuzzy, ycp-format +#| msgid "&TCP port number" +msgid "LDAP port number: %1" +msgstr "&TCP port numarası" + +#: src/LinuxUserMgmt.ycp:686 +#, fuzzy, ycp-format +#| msgid "LDAP Support" +msgid "LDAP secure port: %1" +msgstr "LDAP desteği" + +#: src/LinuxUserMgmt.ycp:688 +#, ycp-format +msgid "Linux/Unix config context: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:690 +#, ycp-format +msgid "LUM workstation context: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:692 +#, ycp-format +msgid "Proxy user name with context: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:695 +msgid "PAM-enabled services to allow authentication via eDirectory:" +msgstr "" + +#: src/LinuxUserMgmt.ycp:696 +#, fuzzy, ycp-format +#| msgid "Location: %1" +msgid "login: %1" +msgstr "Yer: %1" + +#: src/LinuxUserMgmt.ycp:698 +#, ycp-format +msgid "ftp: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:700 +#, fuzzy, ycp-format +#| msgid "Mode: %1" +msgid "sshd: %1" +msgstr "Mod: %1" + +#: src/LinuxUserMgmt.ycp:702 +#, fuzzy, ycp-format +#| msgid "Value: %1" +msgid "su: %1" +msgstr "Değer: %1" + +# clients/online_update.ycp:223 +#: src/LinuxUserMgmt.ycp:704 +#, fuzzy, ycp-format +#| msgid "Peers: %1" +msgid "rsh: %1" +msgstr "Peer: %1" + +# include/nfs/routines.ycp:187 +#: src/LinuxUserMgmt.ycp:706 +#, fuzzy, ycp-format +#| msgid "Wrong option: %1" +msgid "rlogin: %1" +msgstr "Yanlış seçenek: %1" + +#: src/LinuxUserMgmt.ycp:708 +#, ycp-format +msgid "passwd: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:710 +#, fuzzy, ycp-format +#| msgid "Mode: %1" +msgid "xdm: %1" +msgstr "Mod: %1" + +#: src/LinuxUserMgmt.ycp:712 +#, fuzzy, ycp-format +#| msgid "Mode: %1" +msgid "openwbem: %1" +msgstr "Mod: %1" + +#: src/LinuxUserMgmt.ycp:715 +#, fuzzy, ycp-format +#| msgid "Mode: %1" +msgid "gdm: %1" +msgstr "Mod: %1" + +#: src/LinuxUserMgmt.ycp:717 +#, ycp-format +msgid "gdm-autologin: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:719 +#, ycp-format +msgid "gnome-passwd: %1" +msgstr "" + +#: src/LinuxUserMgmt.ycp:721 +#, fuzzy, ycp-format +#| msgid "Screensavers" +msgid "gnome-screensaver: %1" +msgstr "Ekran koruyucuları" + +#: src/LinuxUserMgmt.ycp:723 +#, ycp-format +msgid "gnomesu-pam: %1" +msgstr "" + +#: src/NovellLDAPLUM.ycp:30 src/NovellLDAPLUM.ycp:52 src/NovellLDAPLUM.ycp:350 +#: src/NovellLDAPLUM.ycp:383 src/NovellLDAPLUM.ycp:461 +#: src/NovellLDAPLUM.ycp:556 +#, fuzzy +#| msgid "Local time" +msgid "Local Host" +msgstr "Yerel saat" + +#. LDAP_Dialog caption +#: src/NovellLDAPLUM.ycp:270 +#, fuzzy, ycp-format +#| msgid "DHCP Server Configuration" +msgid "%1 LDAP Server Configuration" +msgstr "DHCP sunucu yapılandırması" + +# clients/inst_source.ycp:192 +#: src/NovellLDAPLUM.ycp:391 +#, fuzzy +#| msgid "&Remote Directory:" +msgid "Local or Remote Directory Server" +msgstr "&Uzak Dizin:" + +#: src/NovellLDAPLUM.ycp:398 +msgid "&Local system" +msgstr "" + +# include/nfs/ui.ycp:88 +#: src/NovellLDAPLUM.ycp:404 +#, fuzzy +#| msgid "&Remote filesystem:" +msgid "&Remote system" +msgstr "&Uzak dosyasistemi" + +# clients/inst_source.ycp:178 +#: src/NovellLDAPLUM.ycp:411 +#, fuzzy +#| msgid "Directory on Server" +msgid "Directory server address" +msgstr "Sunucudaki dizin" + +#: src/NovellLDAPLUM.ycp:413 +msgid "Admin name with context (i.e. cn=admin,o=novell). Optional for Desktop." +msgstr "" + +#: src/NovellLDAPLUM.ycp:415 +msgid "Admin password. Optional for Desktop." +msgstr "" + +#: src/NovellLDAPLUM.ycp:418 +#, fuzzy +#| msgid "I&P Details" +msgid "Port Details" +msgstr "&IP ayrıntıları" + +#: src/NovellLDAPLUM.ycp:477 +#, ycp-format +msgid "%1 is an invalid LDAP syntax. The name must use commas for separators (e.g. cn=admin,o=acme)" +msgstr "" + +#: src/NovellLDAPLUM.ycp:521 +msgid "" +"The attempt to perform a secure LDAP bind did not respond in 2 minutes\n" +"This may indicate a problem with LDAP on the target server.\n" +"If you are confident that your credentials are correct you may continue,\n" +"otherwise please determine if LDAP is running correctly on the target system\n" +"Do you want to continue?" +msgstr "" + +#: src/NovellLDAPLUM.ycp:522 +msgid "LDAP secure bind timeout" +msgstr "" + +#: src/NovellLDAPLUM.ycp:530 +#, ycp-format +msgid "" +"Could not authenticate via LDAP using the following parameters:\n" +" user name: %1\n" +" address: %2\n" +" port: %3\n" +" \n" +" This may indicate that one of the parameters is in error.\n" +" However, if LDAP is not enabled on the eDirectory server\n" +" or configured to listen on a different port than the\n" +" above port, we will not get a response back.\n" +" \n" +" Do you want to continue and use these parameters anyway?" +msgstr "" + +#: src/NovellLDAPLUM.ycp:591 +#, fuzzy +#| msgid "LDAP Support" +msgid "LDAP port" +msgstr "LDAP desteği" + +#: src/NovellLDAPLUM.ycp:592 +#, fuzzy +#| msgid "LDAP Support" +msgid "LDAP secure port" +msgstr "LDAP desteği" + +# clients/inst_root.ycp:130 +#: src/NovellUtilsLUM.ycp:532 src/NovellValidatorsLUM.ycp:74 +msgid "" +"The first and the second version\n" +"of the password don't match!\n" +"Please try again." +msgstr "" +"Girdiğiniz parolalar birbirini tutmuyor\n" +"Yeniden deneyin." + +# include/partitioning/custom_part_dialogs.ycp:130 +#: src/NovellUtilsLUM.ycp:539 src/NovellValidatorsLUM.ycp:81 +#, fuzzy +#| msgid "" +#| "The password may only contain the following characters:\n" +#| " 0..9, a..z, A..Z, and any of \"#* ,.;:._-+!$%&/|?{[()]}\".\n" +#| "Please try again." +msgid "" +"The password may only contain the following\n" +"characters:\n" +" 0..9, a..z, A..Z, and any of \"#*,.;:._-+!$%&/|?{[()]}\".\n" +"Please try again." +msgstr "" +"Parola sadece şu karakterlerden oluşabilir:\n" +" 0..9, a..z, A..Z, ve \"#* ,.;:._-+!$%&/|?{[()]}\".\n" +"Lütfen tekrar deneyin." + +#. TODO - fix this message +#: src/NovellUtilsLUM.ycp:847 +msgid "Unable to add the tree self-signed certificate to the root certificate store" +msgstr "" + +#: src/NovellUtilsLUM.ycp:873 +msgid "Unable to change the group owner of the root certificate store to www" +msgstr "" + +#: src/NovellUtilsLUM.ycp:879 +msgid "Unable to change the group permissions on the root certificate store for write access by www" +msgstr "" + +#: src/NovellValidatorsLUM.ycp:39 +msgid "Cannot have an empty tree name" +msgstr "" + +#: src/NovellValidatorsLUM.ycp:44 +#, fuzzy +#| msgid "The scheme name must not be longer than 32 characters." +msgid "Tree name cannot be longer than 32 characters" +msgstr "Şema adının uzunluğu 32 karakterden fazla olamaz." + +#. FIXEME +#: src/NovellValidatorsLUM.ycp:50 +msgid "Tree name cannot end in a backslash (\"\\\")" +msgstr "" + +#: src/NovellValidatorsLUM.ycp:55 +#, fuzzy +#| msgid "" +#| "The home directory may only contain the following characters:\n" +#| "a-z, A-Z, 0-9, and _-/\n" +#| "Try again." +msgid "Tree names may only contain the following characters [A-Z], [a-z], [0-9] and \"-\" or \"_\"" +msgstr "" +"Ev dizini sadece aşağıdaki karakterlerden oluşabilir:\n" +"a-z, A-Z, 0-9, ve _-/\n" +"Tekrar deneyin." + +#: src/NovellValidatorsLUM.ycp:107 +msgid "" +"Valid port numbers are from 0 to 65536.\n" +"Please try again." +msgstr "" + +#: src/NovellValidatorsLUM.ycp:114 +#, ycp-format +msgid "Port %1 is in use, use anyway?" +msgstr "" + +#: src/NovellValidatorsLUM.ycp:132 +msgid "none" +msgstr "yok" + +#: src/NovellValidatorsLUM.ycp:141 +msgid "The container 'o=security' is reserved and cannot be used in a fully distinguished name" +msgstr "" + +#: src/NovellValidatorsLUM.ycp:171 +#, ycp-format +msgid "%1 does not specify a full name from the tree root." +msgstr "" + +#: src/NovellValidatorsLUM.ycp:201 +msgid "The container 'o=security' is reserved and cannot be used in a context" +msgstr "" + +#: src/NovellValidatorsLUM.ycp:232 +#, ycp-format +msgid "%1 is an invalid context" +msgstr "" + +# +# clients/inst_sw_details.ycp:538 +#: src/NovellValidatorsLUM.ycp:261 +#, fuzzy +#| msgid "Verifying base packages..." +msgid "Verifying user credentials" +msgstr "Temel paketler kontrol ediliyor..." + +# include/ui/common_messages.ycp:99 +#: src/NovellValidatorsLUM.ycp:261 +msgid "Please wait..." +msgstr "Lütfen bekleyin..." + +#: src/NovellValidatorsLUM.ycp:325 +msgid "Enter the existing server IP address." +msgstr "" + +#: src/NovellValidatorsLUM.ycp:399 +#, fuzzy, ycp-format +#| msgid "%1 is not a valid IPv4 address." +msgid "%1 is not a valid pathname" +msgstr "%1 adresi geçersiz bir IPv4 adresidir" + +#: src/NovellValidatorsLUM.ycp:412 +#, fuzzy, ycp-format +#| msgid "" +#| "The file name \"%1\" is invalid.\n" +#| "Use an absolute path name.\n" +msgid "%1 is not a valid absolute pathname" +msgstr "" +"Kullandığınız dosya ismi \"%1\" hatalı.\n" +"Lütfen gerçek dizin yolunu kullanın.\n" + +# clients/lan_inetd_start.ycp:86 +#. LinuxUserMgmt summary dialog caption +#. Initialization dialog caption +#: src/complex.ycp:67 src/wizards.ycp:98 +#, fuzzy +#| msgid "Xinetd Configuration" +msgid "Linux User Mgmt Configuration" +msgstr "Xinetd yapılandırması" + +#. Frame label +#: src/complex.ycp:75 +#, fuzzy +#| msgid "Providers to Configure" +msgid "Linux User Mgmt to Configure" +msgstr "Yapılandırılacak sağlayıcılar" + +# clients/inst_rpmupdate.ycp:269 +#. LinuxUserMgmt overview dialog caption +#: src/complex.ycp:127 +#, fuzzy +#| msgid "Disk Usage Overview" +msgid "Linux User Mgmt Overview" +msgstr "Disk kullanımı özeti" + +# include/sound/ui.ycp:335 +#. Table header +#: src/complex.ycp:134 +msgid "Number" +msgstr "Numara" + +# clients/inst_resize_ui.ycp:598 +#: src/complex.ycp:134 +#, fuzzy +#| msgid "Linux size (%1)" +msgid "Linux User Mgmt" +msgstr "Linux boyutu (%1)" + +#. LinuxUserMgmt configure2 dialog caption +#: src/dialogs.ycp:62 src/dialogs.ycp:208 +#, fuzzy +#| msgid "Power Management Configuration" +msgid "Linux User Management Configuration" +msgstr "Güç yönetimi yapılandırması" + +#: src/dialogs.ycp:95 +msgid "Linux/Unix config context" +msgstr "" + +#: src/dialogs.ycp:96 +msgid "LUM workstation context (e.g. o=novell). Optional for Desktop." +msgstr "" + +#: src/dialogs.ycp:97 +msgid "Proxy user name with context (e.g. cn=proxy.o=novell)" +msgstr "" + +#: src/dialogs.ycp:98 +#, fuzzy +#| msgid "optional" +msgid "(optional)" +msgstr "isteğe bağlı" + +#: src/dialogs.ycp:99 +#, fuzzy +#| msgid "Proxy &Password" +msgid "Proxy user password" +msgstr "Proxy p&arolası" + +#: src/dialogs.ycp:129 src/dialogs.ycp:148 +#, ycp-format +msgid "%1 is an invalid LDAP syntax. The name must use commas for separators (e.g. ou=xyz,o=acme)" +msgstr "" + +#: src/dialogs.ycp:168 +#, ycp-format +msgid "%1 is an invalid LDAP syntax. The name must use commas for separators (e.g. cn=proxyuser,o=acme)" +msgstr "" + +#: src/dialogs.ycp:300 +#, fuzzy +#| msgid "Select the service to configure." +msgid "Select PAM-enabled services to allow" +msgstr "Yapılandırılacak hizmeti seçiniz." + +#: src/dialogs.ycp:301 +#, fuzzy +#| msgid "Authentication Method" +msgid "authentication via eDirectory" +msgstr "Kimlik doğrulama yöntemi" + +#: src/dialogs.ycp:303 +#, fuzzy +#| msgid "Select &All" +msgid "Sele&ct All" +msgstr "&Tümünü seç" + +# include/sound/ui.ycp:241 +#: src/dialogs.ycp:304 +#, fuzzy +#| msgid "&Deselect all" +msgid "Deselec&t All" +msgstr "T&ümünün seçimini kaldır" + +#: src/dialogs.ycp:306 +#, fuzzy +#| msgid "&Login" +msgid "&login" +msgstr "&Sisteme giriş yap" + +#: src/dialogs.ycp:307 +msgid "&ftp" +msgstr "" + +#: src/dialogs.ycp:308 +msgid "ssh&d" +msgstr "" + +#: src/dialogs.ycp:309 +msgid "&su" +msgstr "" + +#: src/dialogs.ycp:310 +msgid "rs&h" +msgstr "" + +#: src/dialogs.ycp:311 +#, fuzzy +#| msgid "&Login" +msgid "rl&ogin" +msgstr "&Sisteme giriş yap" + +#: src/dialogs.ycp:312 +msgid "&passwd" +msgstr "" + +#: src/dialogs.ycp:313 +msgid "&xdm" +msgstr "" + +#: src/dialogs.ycp:314 +msgid "op&enwbem" +msgstr "" + +#: src/dialogs.ycp:316 +msgid "&gdm" +msgstr "" + +#: src/dialogs.ycp:317 +msgid "gdm-&autologin" +msgstr "" + +#: src/dialogs.ycp:318 +msgid "g&nome-passwd" +msgstr "" + +#: src/dialogs.ycp:319 +#, fuzzy +#| msgid "Screensavers" +msgid "gnome-s&creensaver" +msgstr "Ekran koruyucuları" + +#: src/dialogs.ycp:320 +msgid "gnomesu-pa&m" +msgstr "" + +#. Read dialog help 1/2 +#: src/helps.ycp:20 +#, fuzzy +#| msgid "" +#| "<p><b><big>Initializing Power Management Configuration</big></b><br>\n" +#| "Please wait...<br></p>" +msgid "" +"<p><b><big>Initializing Linux User Management Configuration</big></b><br>\n" +"Please wait...<br></p>\n" +msgstr "" +"<p><b><big>Güç yönetimi yapılandırması başlatılıyor</big></b><br>\n" +"Lütfen bekleyin...<br></p>" + +#. Read dialog help 2/2 +#: src/helps.ycp:25 +msgid "" +"<p><b><big>Aborting Initialization:</big></b><br>\n" +"Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" +msgstr "" +"<P><B><BIG>Başlatma işlemini kesme:</BIG></B><BR>\n" +"<b>Kes</b> düğmesine basarak yapılandırma işlemini güvenli bir şekilde kesebilirsiniz.</p>\n" + +#. Write dialog help 1/2 +#: src/helps.ycp:30 +#, fuzzy +#| msgid "" +#| "<p><b><big>Saving Power Management Configuration</big></b><br>\n" +#| "Please wait...<br></p>" +msgid "" +"<p><b><big>Saving Linux User Management Configuration</big></b><br>\n" +"Please wait...<br></p>\n" +msgstr "" +"<p><b><big>Güç yönetimi yapılandırması kaydediliyor</big></b>\n" +"<br>Lütfen bekleyin...<br></p>" + +#. Write dialog help 2/2 +#: src/helps.ycp:35 +msgid "" +"<p><b><big>Aborting Saving:</big></b><br>\n" +"Abort the save procedure by pressing <b>Abort</b>.\n" +"An additional dialog informs whether it is safe to do so.\n" +"</p>\n" +msgstr "" +"<P><B><BIG>Kayıt işleminin durdurulması:</BIG></B><BR>\n" +"<B>Durdur</B> düğmesine basarak kayıt işlemini kesebilirsiniz.\n" +"Bir pencerede bu işlemin güvenli olup olmadığı gösterilecektir.\n" +"</P>\n" + +#. Configure2 dialog help 1/3 +#: src/helps.ycp:42 +msgid "" +"<p><b><big>Linux/Unix config context</big></b><br>\n" +"The eDirctory context (existing or created here) where the Linux/UNIX\n" +"Config object will be created. LDAP searches for LUM User, LUM Group,\n" +"and LUM Workstation objects begin here, so it must be at the same level\n" +"or higher than the LUM objects searched for.</p>\n" +msgstr "" + +#. Configure2 dialog help 2/3 +#: src/helps.ycp:50 +msgid "" +"<P><b><big>LUM workstation context</big></b><br>\n" +"The eDirectory context (existing or created here) for the LUM Workstation\n" +"object created by the install for this server. The context must be the same\n" +"as or below the Base Context specified above.\n" +"</P>" +msgstr "" + +#. Configure2 dialog help 3/3 +#: src/helps.ycp:57 +msgid "" +"<p><b><big>Proxy user name with context (Optional)</big></b><br>\n" +"A user (existing or created here) with rights to search the LDAP tree for LUM\n" +"objects.\n" +"</p>" +msgstr "" + +#. Configure3 dialog help 1/3 +#: src/helps.ycp:63 +msgid "" +"<p><b><big>PAM-enabled Services</big></b><br>\n" +"The PAM-enabled services on this server that will be available to\n" +"authenticated LUM users.</p>\n" +msgstr "" + +#: src/helps.ycp:68 +msgid "" +"<p><b><big>Local or Remote Directory Server</big></b><br>\n" +"Select either Local system or Remote system, depending on the server you are configuring.</p>\n" +msgstr "" + +#: src/helps.ycp:72 +#, fuzzy +#| msgid "" +#| "<p><b><big>Server Address:</big></b> Enter the IP address or host name of the\n" +#| "server to which to connect.</p>\n" +msgid "" +"<p><b><big>Directory server address</big></b><br>\n" +"This field is only active if you select Remote system. Enter the IP address of the remote server you want to configure.</p>\n" +msgstr "" +"<p><b><big>Sunucu adresi</big></b>Bağlanılacak sunucunun IP adresini\n" +"ya da makine adını girin.</p>\n" + +#: src/helps.ycp:76 +msgid "" +"<p><b><big>Admin name with context</big></b><br>\n" +"Enter the LDAP Admin name and context. This is the fully distinguished name of a User object with administrative rights to LDAP. For example: cn=admin,o=acme</p>\n" +msgstr "" + +#: src/helps.ycp:80 +msgid "" +"<p><b><big>Admin password</big></b><br>\n" +"Enter the LDAP Admin password. This is the password of the user specified as the LDAP Admin.</p>\n" +msgstr "" + +#: src/helps.ycp:84 +msgid "" +"<p><b><big>Port Details</big></b><br>\n" +"Click Port Details to view or modify the LDAP port or the secure LDAP port number this server uses to communicate with other servers. The default LDAP port is 389. The default secure LDAP port is 636.</p>\n" +msgstr "" + +# clients/nis.ycp:73 +#. Command line help text for the Xlinux-user-mgmt module +#: src/linux-user-mgmt.ycp:34 +#, fuzzy +#| msgid "Configuration of IPsec" +msgid "Configuration of Linux User Mgmt" +msgstr "IPsec yapılandırması" + +#: src/linux-user-mgmt_proposal.ycp:51 +#, fuzzy +#| msgid "At least one ethernet interface must be configured." +msgid "Linux User Management needs to be configured." +msgstr "En azından bir ethernet arabirimi yapılandırmış olmalısınız." + +#. Rich text title for LinuxUserMgmt in proposals +#: src/linux-user-mgmt_proposal.ycp:81 +#, fuzzy +#| msgid "User &Management" +msgid "Linux User Management" +msgstr "Kullanıcı &yönetimi" + +#. Menu title for LinuxUserMgmt in proposals +#: src/linux-user-mgmt_proposal.ycp:83 +#, fuzzy +#| msgid "User &Management" +msgid "&Linux User Management" +msgstr "Kullanıcı &yönetimi" + +#. Initialization dialog contents +#: src/wizards.ycp:100 +msgid "Initializing..." +msgstr "Başlatılıyor..." Added: branches/plus-SLE12-SP2/yast/tr/po/migration.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/migration.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/migration.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,151 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2016-05-06 16:58+0200\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#. TRANSLATORS: dialog title +#: src/lib/migration/finish_dialog.rb:49 +#, fuzzy +#| msgid "Configuration File" +msgid "Migration Finished" +msgstr "Yapılandırma dosyası" + +#. TRANSLATORS: popup messsage +#: src/lib/migration/finish_dialog.rb:67 +msgid "The system will be restarted now to activate the changes." +msgstr "" + +# include/ui/common_messages.ycp:59 +#. TRANSLATORS: a push button label, pressing the button will restart +#. the system immediately +#: src/lib/migration/finish_dialog.rb:70 +#, fuzzy +#| msgid "&Restart" +msgid "&Restart Now" +msgstr "Yeniden &başlat" + +# clients/inst_kernel.ycp:269 +#. TRANSLATORS: a short help text (the details are directly in the dialog) +#: src/lib/migration/finish_dialog.rb:84 +#, fuzzy +#| msgid "" +#| "<p><b>Finish</b> will close the YaST installation and continue\n" +#| "to the login screen.</p>\n" +msgid "<p><b>Finish</b> will close the migration and you should restart the system as soon as possible.</b>" +msgstr "" +"<p><b>Sonlandır</b> düğmesi ile YaST kurulumunu sonlandırıp\n" +"sisteme giriş ekranına geçebilirsiniz.</p>\n" + +#. TRANSLATORS: The final congratulation displayed at the end of migration, +#. in RichText format, %s = URL link to the SUSE home page +#: src/lib/migration/finish_dialog.rb:101 +msgid "" +"<h2>Congratulations!</h2><br>\n" +"<p>You have just successfully finished the on-line migration.<br>\n" +"The system has been upgraded, it should be restarted\n" +"as soon as possible to activate the changes.</p>\n" +"<p>Please visit us at %s.</p>\n" +"<br>\n" +"<p>Have a lot of fun!</p>\n" +"<p>      \n" +"Your SUSE Development Team</p>" +msgstr "" + +#. TRANSLATORS: popup question, confirm installing the available updates now +#: src/lib/migration/main_workflow.rb:169 +msgid "" +"There are some online updates available to installation,\n" +"it is recommended to install all updates before proceeding.\n" +"\n" +"Would you like to install the updates now?" +msgstr "" + +#. TRANSLATORS: an error message, the migration to a new service pack failed +#. or was aborted, the system is in partly migrated state and should be restored +#. from a snapshot or backup +#: src/lib/migration/main_workflow.rb:216 +msgid "" +"The migration to the new service pack has failed. The system is most\n" +"likely in an inconsistent state.\n" +"\n" +"We strongly recommend to rollback to a snapshot created before the\n" +"migration was started (via selecting the snapshot in the boot menu\n" +"if you use snapper) or restore the system from a backup." +msgstr "" + +#. create a filesystem snapshot +#. @param [Symbol, String] type the type of the snapshot (:single, :pre or :post) +#. @param [String] desc description of the snapshot for users +#. @param [Fixnum] pre_id id of the respective "pre" snapshot (needed +#. only for "post" type snapshots) +#. @return [Fixnum,nil] id of the created snapshot (nil if failed) +#: src/lib/migration/main_workflow.rb:277 +msgid "Failed to create a filesystem snapshot." +msgstr "" + +#. TRANSLATORS: a summary heading +#: src/lib/migration/proposal_client.rb:83 +#, fuzzy +#| msgid "Configuration Summary" +msgid "Migration Summary" +msgstr "Yapılandırma özeti" + +#. TRANSLATORS: a menu entry +#: src/lib/migration/proposal_client.rb:85 +#, fuzzy +#| msgid "Configuration Summary" +msgid "&Migration Summary" +msgstr "Yapılandırma özeti" + +#. TRANSLATORS: A warning message displayed in the migration proposal +#. %{name} is a repository name, %{link} is a hidden internal identifier +#: src/lib/migration/proposal_client.rb:152 +msgid "Warning: Repository <b>%{name}</b> is obsolete and should be excluded from migration.<br>It is highly recommended to disable this repository. (<a href=\"%{link}\">Disable</a>)" +msgstr "" + +#. TRANSLATORS: help text +#: src/lib/migration/proposal_client.rb:190 +msgid "<p>This is an overview of the product migration.</p>\n" +msgstr "" + +#. @return [String] translated headline +#. to get the _() method +#: src/lib/migration/proposal_store.rb:45 test/proposal_store_test.rb:34 +msgid "Migration proposal" +msgstr "" + +#. returns single list of modules presentation order or list of tabs with +#. list of modules +#. mock getting descriptions as we do not want in build to depend on all +#. yast modules from which we use proposal clients +#: src/lib/migration/proposal_store.rb:63 test/proposal_store_test.rb:66 +#, fuzzy +#| msgid "" +#| "<p>\n" +#| "To use the settings as displayed, press <b>Next</b>.\n" +#| "</p>\n" +msgid "" +"<p>\n" +"To start online migration, press <b>Next</b>.\n" +"</p>\n" +msgstr "" +"<p>\n" +"Görüntülenen ayarları kullanmak için <b>İleri</b> düğmesine basın.\n" +"</p>\n" Added: branches/plus-SLE12-SP2/yast/tr/po/s390.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/s390.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/s390.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,2155 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2016-05-06 16:59+0200\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#. Command line help text for the Xcontroller module +#: src/clients/dasd.rb:49 +#, fuzzy +#| msgid "Configuration of CASA" +msgid "Configuration of DASD" +msgstr "CASA yapılandırması" + +#. text for installation summary +#: src/clients/dasd_proposal.rb:46 +#, fuzzy +#| msgid "No hard disks were detected." +msgid "No DASD disk detected" +msgstr "Bir sabit disk algılanamadı." + +#. section name in proposal dialog +#: src/clients/dasd_proposal.rb:71 +#, fuzzy +#| msgid "DASD Name" +msgid "DASD" +msgstr "DASD adı" + +#. section name in proposal - menu item +#: src/clients/dasd_proposal.rb:73 src/include/s390/dump/ui.rb:110 +msgid "&DASD" +msgstr "" + +#. Command line help text for the Xcontroller module +#: src/clients/dump.rb:50 +msgid "Creation of S/390 dump devices" +msgstr "" + +# include/nfs_server/ui.ycp:191 +#. Command line help text for the Xcontroller module +#: src/clients/iucvterminal-server.rb:45 +#, fuzzy +#| msgid "Configuration of the NFS server" +msgid "Configuration of IUCV terminal server" +msgstr "NFS sunucusunun yapılandırması" + +#. Command line help text for the Xcontroller module +#: src/clients/iucvterminal.rb:45 +#, fuzzy +#| msgid "Configuring general settings..." +msgid "Configuration of IUCV terminal settings" +msgstr "Genel ayarlar yapılıyor..." + +# clients/nis.ycp:73 +#. Command line help text for the OnPanic module +#: src/clients/onpanic.rb:52 +#, fuzzy +#| msgid "Configuration of mail" +msgid "Configuration of OnPanic" +msgstr "E-posta yapılandırması" + +#. popup label +#: src/clients/s390-disk-controller.rb:49 +#, fuzzy +#| msgid "Available Profiles" +msgid "Detecting Available Controllers" +msgstr "Mevcut profiller" + +#. Initialization dialog caption +#: src/clients/s390-disk-controller.rb:72 +#, fuzzy +#| msgid "Disk controller configuration" +msgid "S/390 Disk Controller Configuration" +msgstr "Disk denetleyicisi yapılandırması" + +#. push button +#: src/clients/s390-disk-controller.rb:84 +#, fuzzy +#| msgid "Configure Drives" +msgid "Configure &DASD Disks" +msgstr "Sürücüleri yapılandır" + +#. push button +#: src/clients/s390-disk-controller.rb:94 +#, fuzzy +#| msgid "Configure Drives" +msgid "Configure &ZFCP Disks" +msgstr "Sürücüleri yapılandır" + +#. Initialization dialog contents +#. Initialization dialog contents +#: src/clients/s390-disk-controller.rb:103 +#: src/include/s390/dasd/wizards.rb:102 src/include/s390/zfcp/wizards.rb:98 +msgid "Initializing..." +msgstr "Başlatılıyor..." + +#. Command line help text for the Xcontroller module +#: src/clients/zfcp.rb:49 +#, fuzzy +#| msgid "Configuration of CASA" +msgid "Configuration of ZFCP" +msgstr "CASA yapılandırması" + +#. text for installation summary +#: src/clients/zfcp_proposal.rb:46 +#, fuzzy +#| msgid "No specific device configured" +msgid "No zFCP device configured" +msgstr "Belirli bir aygıt yapılandırılmadı" + +#. section name in proposal dialog +#: src/clients/zfcp_proposal.rb:71 +msgid "zFCP" +msgstr "" + +#. section name in proposal - menu item +#: src/clients/zfcp_proposal.rb:73 +msgid "&zFCP" +msgstr "" + +#. menu button id +#: src/include/s390/dasd/dialogs.rb:170 +#, fuzzy +#| msgid "Activated" +msgid "&Activate" +msgstr "Etkin" + +#. menu button id +#: src/include/s390/dasd/dialogs.rb:172 +#, fuzzy +#| msgid "Deactivated" +msgid "&Deactivate" +msgstr "Kapalı" + +#. menu button id +#. menu button id +#: src/include/s390/dasd/dialogs.rb:174 src/include/s390/dasd/dialogs.rb:183 +msgid "Set DIAG O&n" +msgstr "" + +#. menu button id +#. menu button id +#: src/include/s390/dasd/dialogs.rb:176 src/include/s390/dasd/dialogs.rb:185 +msgid "Set DIAG O&ff" +msgstr "" + +# +# clients/inst_custom_part.ycp:1507 +#. menu button id +#: src/include/s390/dasd/dialogs.rb:178 +msgid "&Format" +msgstr "&Biçimlendir" + +#. menu button id +#: src/include/s390/dasd/dialogs.rb:187 +#, fuzzy +#| msgid "File Format" +msgid "Set Format On" +msgstr "Dosya düzeni" + +#. menu button id +#: src/include/s390/dasd/dialogs.rb:189 +#, fuzzy +#| msgid "File Format" +msgid "Set Format Off" +msgstr "Dosya düzeni" + +#. integer field (count of disks formatted parallel) +#: src/include/s390/dasd/dialogs.rb:201 +#, fuzzy +#| msgid "&Parallel port details..." +msgid "&Parallel Formatted Disks" +msgstr "&Paralel port ayrıntıları..." + +#. error popup message +#. error popup message +#. error popup message +#: src/include/s390/dasd/dialogs.rb:225 src/include/s390/dasd/dialogs.rb:687 +#: src/include/s390/zfcp/dialogs.rb:477 +#, fuzzy +#| msgid "No zone is selected." +msgid "No disk selected." +msgstr "Bir bölge seçilmemiş." + +#. 8 means disk is not formatted +#. unformtted disk, manual (not AutoYaST) +#: src/include/s390/dasd/dialogs.rb:254 src/modules/DASDController.rb:160 +msgid "Device %1 is not formatted. Format device now?" +msgstr "" + +#: src/include/s390/dasd/dialogs.rb:256 src/modules/DASDController.rb:162 +msgid "There are %1 unformatted devices. Format them now?" +msgstr "" + +#. for autoinst, format unformatted disks later +#: src/include/s390/dasd/dialogs.rb:267 +msgid "Couldn't find device for channel %1." +msgstr "" + +#. error report, %1 is device identification +#: src/include/s390/dasd/dialogs.rb:321 +#, fuzzy +#| msgid "DNS zone %1 is not type master." +msgid "Disk %1 is not active." +msgstr "%1 DNS bölgesi ana türde değil." + +#. error report, %1 is device identification +#: src/include/s390/dasd/dialogs.rb:327 +#, fuzzy +#| msgid "Value %1 is not allowed for option %2." +msgid "Disk %1 is not accessible for writing." +msgstr "%2 seçeneği için %1 değerine izin verilmez." + +#. popup question +#: src/include/s390/dasd/dialogs.rb:353 +msgid "" +"Formatting these disks destroys all data on them.<br>\n" +"Really format the following disks?<br>\n" +"%1" +msgstr "" + +#. Dialog caption +#: src/include/s390/dasd/dialogs.rb:416 +#, fuzzy +#| msgid "Host Management" +msgid "DASD Disk Management" +msgstr "Makine yönetimi" + +#. table header +#. table header +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:423 src/include/s390/dasd/dialogs.rb:432 +#: src/include/s390/zfcp/dialogs.rb:120 src/include/s390/zfcp/dialogs.rb:129 +#, fuzzy +#| msgid "Channel" +msgid "Channel ID" +msgstr "Kanal" + +# +#. table header +#: src/include/s390/dasd/dialogs.rb:425 +msgid "Format" +msgstr "Biçimlendir" + +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:427 src/include/s390/dasd/dialogs.rb:440 +#, fuzzy +#| msgid "&Use LDAP" +msgid "Use DIAG" +msgstr "LDAP &Kullan" + +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:434 src/include/s390/zfcp/dialogs.rb:135 +msgid "Device" +msgstr "Aygıt" + +#. table header +#. table header +#: src/include/s390/dasd/dialogs.rb:436 +#: src/include/s390/iucvterminal-server/ui.rb:242 +msgid "Type" +msgstr "Tür" + +# include/cups/ui.ycp:264 +#. table header +#: src/include/s390/dasd/dialogs.rb:438 +msgid "Access Type" +msgstr "Erişim türü" + +# +#. table header +#: src/include/s390/dasd/dialogs.rb:442 +#, fuzzy +#| msgid "Format" +msgid "Formatted" +msgstr "Biçimlendir" + +# clients/online_update_details.ycp:113 +#. table header +#: src/include/s390/dasd/dialogs.rb:444 +#, fuzzy +#| msgid "Additional Information" +msgid "Partition Information" +msgstr "Ek bilgi" + +# clients/ui_widgets.ycp:182 clients/ui_widgets.ycp:210 +#. text entry +#. text entry +#: src/include/s390/dasd/dialogs.rb:455 src/include/s390/zfcp/dialogs.rb:146 +#, fuzzy +#| msgid "Minimum &UID" +msgid "Mi&nimum Channel ID" +msgstr "Minimum &UID" + +#. text entry +#. text entry +#: src/include/s390/dasd/dialogs.rb:462 src/include/s390/zfcp/dialogs.rb:153 +#, fuzzy +#| msgid "&Write Channel" +msgid "Ma&ximum Channel ID" +msgstr "&Yazma kanalı" + +#. push button +#. push button +#: src/include/s390/dasd/dialogs.rb:468 src/include/s390/zfcp/dialogs.rb:159 +msgid "&Filter" +msgstr "&Filtre" + +#. menu button +#. menu button +#: src/include/s390/dasd/dialogs.rb:478 src/include/s390/dasd/dialogs.rb:485 +#, fuzzy +#| msgid "Perform Installation" +msgid "Perform &Action" +msgstr "Kurulumu Başlat" + +# include/sound/ui.ycp:241 +#: src/include/s390/dasd/dialogs.rb:481 +#, fuzzy +#| msgid "&Select all" +msgid "&Select All" +msgstr "&Tümünü seç" + +# include/sound/ui.ycp:241 +#: src/include/s390/dasd/dialogs.rb:482 +#, fuzzy +#| msgid "&Deselect all" +msgid "&Deselect All" +msgstr "T&ümünün seçimini kaldır" + +#. error popup +#. error popup +#: src/include/s390/dasd/dialogs.rb:553 src/include/s390/zfcp/dialogs.rb:221 +msgid "Invalid filter channel IDs." +msgstr "" + +# classnames.ycp:163 clients/hwinfo.ycp:70 +#. Dialog caption +#: src/include/s390/dasd/dialogs.rb:597 +#, fuzzy +#| msgid "DASD Disks" +msgid "Add New DASD Disk" +msgstr "DASD diskleri" + +# include/ui/common_messages.ycp:19 +#. text entry +#. combo box +#: src/include/s390/dasd/dialogs.rb:608 src/include/s390/zfcp/dialogs.rb:301 +#, fuzzy +#| msgid "&Channel" +msgid "&Channel ID" +msgstr "&Kanal" + +#. check box +#: src/include/s390/dasd/dialogs.rb:612 +#, fuzzy +#| msgid "&Format Floppy Disk" +msgid "Format the Disk" +msgstr "Disketi &biçimlendir" + +#. check box +#: src/include/s390/dasd/dialogs.rb:615 +#, fuzzy +#| msgid "&Use LDAP" +msgid "Use &DIAG" +msgstr "LDAP &Kullan" + +#. yes-no popup +#: src/include/s390/dasd/dialogs.rb:637 +#, fuzzy +#| msgid "" +#| "Really leave the DNS server configuration without saving?\n" +#| "All changes will be lost." +msgid "" +"Really leave the DASD disk configuration without saving?\n" +"All changes will be lost." +msgstr "" +"DNS yapılandırmasından kaydetmeden çıkacak mısınız?\n" +"Tüm değişiklikler kaybolacaktır." + +#. error popup +#. error popup +#. error popup +#. error popup +#: src/include/s390/dasd/dialogs.rb:648 src/include/s390/zfcp/dialogs.rb:351 +#: src/include/s390/zfcp/dialogs.rb:368 src/include/s390/zfcp/dialogs.rb:404 +#, fuzzy +#| msgid "Enter a TV channel." +msgid "Not a valid channel ID." +msgstr "TV kanalı girin." + +# include/ui/file_popups.ycp:96 include/ui/file_popups.ycp:127 include/ui/file_popups.ycp:138 include/ui/file_popups.ycp:180 +#. error popup +#. error popup +#: src/include/s390/dasd/dialogs.rb:658 src/include/s390/zfcp/dialogs.rb:434 +#, fuzzy +#| msgid " already exists." +msgid "Device already exists." +msgstr " zaten mevcut." + +#. Read dialog help 1/2 +#: src/include/s390/dasd/helps.rb:36 +#, fuzzy +#| msgid "" +#| "<p><b><big>Initializing inetd Configuration</big></b><br>\n" +#| "Please wait...<br></p>\n" +msgid "" +"<p><b><big>Initializing Controller Configuration</big></b><br>\n" +"</p>\n" +msgstr "" +"<p><b><big>inetd yapılandırması başlatılıyor</big></b>\n" +"<br>Lütfen bekleyin...<br></p>\n" + +#. Read dialog help 2/2 +#. Read dialog help 2/2 +#: src/include/s390/dasd/helps.rb:40 src/include/s390/zfcp/helps.rb:40 +msgid "" +"<p><b><big>Aborting Initialization:</big></b><br>\n" +"Safely abort the configuration utility by pressing <b>Abort</b> now.</p>" +msgstr "" +"<P><B><BIG>Başlama işlemini kesme:</BIG></B><BR>\n" +"<b>Kes</b> düğmesine basarak yapılandırma işlemini güvenli bir şekilde kesebilirsiniz.</p>" + +#. Write dialog help 1/2 +#: src/include/s390/dasd/helps.rb:44 +#, fuzzy +#| msgid "" +#| "<p><b><big>Saving the Configuration</big></b><br>\n" +#| "Please wait...</p>" +msgid "" +"<p><b><big>Saving Controller Configuration</big></b><br>\n" +"</p>\n" +msgstr "" +"<p><b><big>Yapılandırma kaydediliyor</big></b><br>\n" +"Lütfen bekleyin...</p>" + +#. Write dialog help 2/2 +#. Write dialog help 2/2 +#: src/include/s390/dasd/helps.rb:48 src/include/s390/zfcp/helps.rb:48 +#, fuzzy +#| msgid "" +#| "<p><b><big>Aborting Saving:</big></b><br>\n" +#| "Abort the save procedure by pressing <b>Abort</b>.\n" +#| "An additional dialog will inform you whether it is safe to do so.\n" +#| "</p>\n" +msgid "" +"<p><b><big>Aborting Saving:</big></b><br>\n" +"Abort the save procedure by pressing <b>Abort</b>.\n" +"An additional dialog will inform you whether it is safe to do so.</p>\n" +msgstr "" +"<P><B><BIG>Kayıt işleminin durdurulması:</BIG></B><BR>\n" +"<B>Durdur</B> düğmesine basarak kayıt işlemini kesebilirsiniz.\n" +"Bir pencerede bu işlemin güvenli olup olmadığı gösterilecektir.\n" +"</P>\n" + +#. Disk selection dialog help 1/4 +#. Disk selection dialog help 1/4 +#: src/include/s390/dasd/helps.rb:54 src/include/s390/dasd/helps.rb:68 +#, fuzzy +#| msgid "" +#| "<p><b><big>DNS Zones</big></b><br>\n" +#| "Use this dialog to manage the DNS zones.</p>\n" +msgid "" +"<p><b><big>Configured DASD Disks</big></b><br>\n" +"In this dialog, manage DASD disks on your system.</p>" +msgstr "" +"<p><b><big>DNS bölgeleri</big></b><br>\n" +"Buradan DNS bölgelerini yönetebilirsiniz.</p>\n" + +#. Disk selection dialog help 2/4 +#. Disk selection dialog help 2/4 +#: src/include/s390/dasd/helps.rb:58 src/include/s390/dasd/helps.rb:72 +msgid "" +"<p>To filter the displayed disks, set the <b>Minimum Channel ID</b> and \n" +"the <b>Maximum Channel ID</b> and click <b>Filter</b>.</p>\n" +msgstr "" + +#. Disk selection dialog help 4/4 +#: src/include/s390/dasd/helps.rb:62 +#, fuzzy +#| msgid "<p>To configure more settings, click <b>Advanced Settings</b>.</p>" +msgid "<p>To configure a new DASD disk, click <b>Add</b>.</p>" +msgstr "<p>Daha fazla ayar için <b>Gelişmiş ayarlar</b> düğmesini kullanın.</p>" + +#. Disk selection dialog help 4/4 +#: src/include/s390/dasd/helps.rb:64 +#, fuzzy +#| msgid "<p>To remove an option, select it and click <b>Delete</b>.</p>" +msgid "" +"<p>To remove a configured DASD disk, select it and click\n" +"<b>Delete</b>.</p>" +msgstr "<p>Bir seçeneği silmek için seçip <b>Sil</b> düğmesine basın.</p>" + +#. Disk selection dialog help 3/4 +#: src/include/s390/dasd/helps.rb:76 +msgid "" +"<p>To perform actions on multiple disks at once, mark these disks. To select all displayed disk (possibly after applying a filter), click\n" +"<b>Select All</b> or <b>Deselect All</b>.</p>\n" +msgstr "" + +#. Disk selection dialog help 4/4 +#: src/include/s390/dasd/helps.rb:80 +msgid "" +"<p>To perform an action on the selected disks, use <b>Perform Action</b>.\n" +"The action will be performed immediately!</p>" +msgstr "" + +#. Disk add help 1/3 +#: src/include/s390/dasd/helps.rb:84 +msgid "" +"<p><b><big>Add New DASD Disk</big></b><br>\n" +"To add a disk, enter the <b>Channel ID</b> of the DASD disk as\n" +"identifier.</p>" +msgstr "" + +#. Disk add help 1/3 +#: src/include/s390/dasd/helps.rb:90 +msgid "" +"<p>If the disk should be formatted,\n" +"use <b>Format the Disk</b>.</p>\n" +msgstr "" + +#. Disk add help 3/3 +#: src/include/s390/dasd/helps.rb:94 +#, fuzzy +#| msgid "" +#| "<p>\n" +#| "To shift to the user dialog, select <b>Users</b>.\n" +#| "</p>\n" +msgid "<p>To use DIAG mode, select <b>Use DIAG</b>.</p>\n" +msgstr "" +"<p>\n" +"Kullanıcı yönetimi penceresine geçmek için <b>Kullanıcılar</b> düğmesine basın.\n" +"</p>\n" + +#. Initialization dialog caption +#. Initialization dialog caption +#: src/include/s390/dasd/wizards.rb:100 src/include/s390/zfcp/wizards.rb:96 +#, fuzzy +#| msgid "Disk controller configuration" +msgid "Controller Configuration" +msgstr "Disk denetleyicisi yapılandırması" + +# clients/lan_inetd_custom.ycp:839 +#. Run the dialog for Dump +#. @param what symbol a +#. @return [Symbol] EditDumpDialog that was edited +#: src/include/s390/dump/ui.rb:47 +#, fuzzy +#| msgid "Create New Loop Device Setup" +msgid "Create Dump Device" +msgstr "Yeni loop aygıt yapılandırması oluştur." + +#. Dump dialog help 1/8 +#: src/include/s390/dump/ui.rb:50 +msgid "<p><b>Prepare one or more volumes for use as S/390 dump device.</b></p>" +msgstr "" + +#. Dump dialog help 2/8 +#: src/include/s390/dump/ui.rb:54 +msgid "<p>Supported devices are ECKD DASD and ZFCP disks, while multi-volumes are limited to DASD.<br>" +msgstr "" + +#. Dump dialog help 3/8 +#: src/include/s390/dump/ui.rb:58 +msgid "" +"Only whole disks can be used, no partitions. If the device is incompatibly\n" +"formatted or partitioned, activate the checkbox <b>Force overwrite of disk</b>.</p>" +msgstr "" + +#. Dump dialog help 4/8 +#: src/include/s390/dump/ui.rb:62 +msgid "<p>To use DASD and ZFCP devices activate them in the respective YaST DASD or ZFCP dialog.<br>" +msgstr "" + +#. Dump dialog help 5/8 +#: src/include/s390/dump/ui.rb:66 +msgid "Devices which are in use or have mounted partitions will not be shown.</p>" +msgstr "" + +#. Dump dialog help 6/8 +#: src/include/s390/dump/ui.rb:70 +msgid "" +"<p><b>dumpdevice</b> after a disk indicates that it is a usable dump\n" +"device. Multi-volume dump devices are indicated by a list of DASD IDs.</p>" +msgstr "" + +#. Dump dialog help 7/8 +#: src/include/s390/dump/ui.rb:74 +msgid "<p>ZFCP columns: Device, Size, ID, WWPN, LUN, Dump<br>" +msgstr "" + +#. Dump dialog help 8/8 +#: src/include/s390/dump/ui.rb:76 +msgid "DASD columns: Device, Size, ID, Dump</p>" +msgstr "" + +#. Dialog content +#: src/include/s390/dump/ui.rb:95 +msgid "&ZFCP" +msgstr "" + +#: src/include/s390/dump/ui.rb:121 +msgid "&Force overwrite of disk" +msgstr "" + +# include/partitioning/lvm_pv_lib.ycp:199 include/partitioning/lvm_pv_lib.ycp:231 include/partitioning/raid_lib.ycp:261 include/partitioning/raid_lib.ycp:292 +#. prevent leading space +#: src/include/s390/dump/ui.rb:185 +#, fuzzy +#| msgid "You have to select one device in the table" +msgid "You haven't selected any device." +msgstr "Ana penceredeki tablodan bir aygıt seçmelisiniz" + +#. warn only in case of force +#: src/include/s390/dump/ui.rb:193 +msgid "The disk %1 will be formatted as a dump device. All data on this device will be lost! Continue?" +msgstr "" + +#. don't quit in case of failures, error messages are reported by FormatDisk() +#: src/include/s390/dump/ui.rb:203 +msgid "Operation successful. Initialize another dump device?" +msgstr "" + +#. z/VM IDs dialog help 1/1 +#: src/include/s390/iucvterminal-server/helps.rb:36 +#, fuzzy +#| msgid "<p><b><big>Connection Configuration</big></b></p>" +msgid "<p><b><big>z/VM IDs</big></b></p>" +msgstr "<p><b><big>Bağlantı yapılandırması</big></b></p>" + +#: src/include/s390/iucvterminal-server/helps.rb:39 +msgid "" +"<p>To configure the IUCV terminal server, specify the z/VM IDs to be used.\n" +"<br>They are separated by line breaks.</p>\n" +msgstr "" + +#. TS-Shell dialog help 1/5 +#: src/include/s390/iucvterminal-server/helps.rb:43 +#, fuzzy +#| msgid "" +#| "\n" +#| "<p><b><big>Time Zone and Clock Settings</big></b></p>" +msgid "<p><b><big>TS-Shell</big></b></p>" +msgstr "" +"\n" +"<p><b><big>Saat Dilimi ve Saat Yapılandırması</big></b></p>" + +#: src/include/s390/iucvterminal-server/helps.rb:46 +msgid "<p>TS-Shell allows to specify <b>Authorization</b> for every TS-Shell user and group. The rights of a group are inherited by its members.</p>" +msgstr "" + +#. TS-Shell dialog help 2/5 +#: src/include/s390/iucvterminal-server/helps.rb:50 +msgid "<p>Each allowed z/VM ID can be selected manually under <b>Selection</b>, defined by a <b>Regex</b> or loaded from a <b>File</b> which contains all allowed z/VM IDs separated by line breaks.</p>" +msgstr "" + +#. TS-Shell dialog help 3/5 +#: src/include/s390/iucvterminal-server/helps.rb:54 +msgid "" +"<p>Click on <b>New User</b> to create new TS-Shell users or <b>Delete\n" +"User</b> to remove users.</p>" +msgstr "" + +#. TS-Shell dialog help 4/5 +#: src/include/s390/iucvterminal-server/helps.rb:58 +msgid "" +"<p>To add or remove groups from the TS-Shell authorization table or to change\n" +"the membership of users, go to <b>Manage Groups</b>.</p>" +msgstr "" + +#. TS-Shell dialog help 5/5 +#: src/include/s390/iucvterminal-server/helps.rb:62 +msgid "<p>With <b>Audited IDs</b> specify the z/VM IDs from which transcripts should be gathered.</p>" +msgstr "" + +#. TS-Shell User creation dialog help 1/3 +#: src/include/s390/iucvterminal-server/helps.rb:66 +#, fuzzy +#| msgid "" +#| "\n" +#| "<p><b><big>Time Zone and Clock Settings</big></b></p>" +msgid "<p><b><big>New TS-Shell User</big></b></p>" +msgstr "" +"\n" +"<p><b><big>Saat Dilimi ve Saat Yapılandırması</big></b></p>" + +#: src/include/s390/iucvterminal-server/helps.rb:69 +msgid "" +"<p>To create new TS-Shell user the <b>Username</b>, <b>Home Directory</b> and <b>Password</b> has to be provided.\n" +"\t<br>It is also possible to specify <b>Additional Groups</b> by selecting them on the right.</p>" +msgstr "" + +#. TS-Shell User creation dialog help 2/3 +#: src/include/s390/iucvterminal-server/helps.rb:73 +msgid "<p>To ensure that the user changes his password after the first login, activate <b>Force Password Change</b>.</p>" +msgstr "" + +#. TS-Shell User creation dialog help 3/3 +#: src/include/s390/iucvterminal-server/helps.rb:77 +msgid "" +"<p>You can specify the same home directory for every TS-Shell user since no\n" +"data will be stored there.</p>" +msgstr "" + +#. TS-Shell Managing Groups dialog help 1/5 +#: src/include/s390/iucvterminal-server/helps.rb:81 +#, fuzzy +#| msgid "<p><b><big>Connection Configuration</big></b></p>" +msgid "<p><b><big>Manage Groups for TS-Authorization</big></b></p>" +msgstr "<p><b><big>Bağlantı yapılandırması</big></b></p>" + +#: src/include/s390/iucvterminal-server/helps.rb:84 +msgid "" +"<p>Define TS-Shell authorizations per group if you want every TS-Shell \n" +"member of this groups to inherit the same rights.</p>" +msgstr "" + +#. TS-Shell Managing Groups dialog help 2/5 +#: src/include/s390/iucvterminal-server/helps.rb:88 +msgid "" +"<p>Existing groups can be added to or removed from the TS-Shell\n" +"authorization. Select the groups in the table and click on <b>Select or Deselect</b>. The current status is shown in the column <b>TS-Auth</b>.</p>" +msgstr "" + +#. TS-Shell Managing Groups dialog help 3/5 +#: src/include/s390/iucvterminal-server/helps.rb:92 +msgid "" +"<p>Change TS-Shell members of a selected group in the <b>TS-Members</b>\n" +"selection.</p>" +msgstr "" + +#. TS-Shell Managing Groups dialog help 4/5 +#: src/include/s390/iucvterminal-server/helps.rb:96 +msgid "" +"<p>New groups could be created by entering the name in the <b>New Group</b> input field and confirming with <b>Create</b>.\n" +"\t<br>To delete previously created groups the <b>YaST users</b> dialog has to be used.</p>" +msgstr "" + +#. TS-Shell Managing Groups dialog help 5/5 +#: src/include/s390/iucvterminal-server/helps.rb:100 +msgid "<p>Undo changes in this dialog by clicking the <b>Back</b> button.</p>" +msgstr "" + +#. IUCVConn on Login dialog help 1/2 +#: src/include/s390/iucvterminal-server/helps.rb:104 +#, fuzzy +#| msgid "<p><b><big>Connection Configuration</big></b></p>" +msgid "<p><b><big>IUCVConn on Login</big></b></p>" +msgstr "<p><b><big>Bağlantı yapılandırması</big></b></p>" + +#: src/include/s390/iucvterminal-server/helps.rb:107 +msgid "<p>IUCVConn on Login needs one user for every z/VM ID. To create these users a <b>password</b> and <b>home directory</b> has to be provided." +msgstr "" + +#. IUCVConn on Login dialog help 2/2 +#: src/include/s390/iucvterminal-server/helps.rb:111 +msgid "<p>It is possible to sync the users manually by clicking on <b>Sync</b> or just confirming the changes with <b>Ok</b> while <b>IUCVConn on Login</b> is enabled. </p>" +msgstr "" + +#. Text approval +#: src/include/s390/iucvterminal-server/ui.rb:54 +msgid "Yes" +msgstr "Evet" + +#. Text disapproval +#: src/include/s390/iucvterminal-server/ui.rb:57 +msgid "No" +msgstr "Hayır" + +# include/scanner/scanner_functions.ycp:218 +#. Text for category user +#: src/include/s390/iucvterminal-server/ui.rb:60 +#, fuzzy +#| msgid "NIS users" +msgid "user" +msgstr "NIS kullanıcıları" + +# include/partitioning/lvm_ui_lib.ycp:189 include/partitioning/lvm_ui_lib.ycp:254 +#. Text for category group +#: src/include/s390/iucvterminal-server/ui.rb:63 +#, fuzzy +#| msgid "A&dd group" +msgid "group" +msgstr "Grup &ekle" + +#. filter non ts users +#: src/include/s390/iucvterminal-server/ui.rb:200 +msgid "z/&VM IDs (auto-sorted)" +msgstr "" + +# clients/inst_sw_single.ycp:192 +#: src/include/s390/iucvterminal-server/ui.rb:219 +#, fuzzy +#| msgid "&Enable Firewall" +msgid "&Enable TS-Shell" +msgstr "Firewall'u etkinleştir" + +#: src/include/s390/iucvterminal-server/ui.rb:229 +msgid "Authorization" +msgstr "Kimlik doğrulama" + +#. table header +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:244 +#: src/include/s390/iucvterminal-server/ui.rb:545 +msgid "Name" +msgstr "Ad" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:246 +msgid "UID/GID" +msgstr "" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:248 +#, fuzzy +#| msgid "Group &Members" +msgid "Groups/Members" +msgstr "Grup &üyeleri" + +# include/cups/ui.ycp:1414 include/cups/ui.ycp:1444 include/cups/ui.ycp:1450 +#: src/include/s390/iucvterminal-server/ui.rb:253 +#, fuzzy +#| msgid "&NIS Users" +msgid "&New User" +msgstr "&NIS kullanıcıları" + +#: src/include/s390/iucvterminal-server/ui.rb:255 +#, fuzzy +#| msgid "&Delete Zone" +msgid "&Delete User" +msgstr "Bölge &sil" + +#: src/include/s390/iucvterminal-server/ui.rb:259 +#, fuzzy +#| msgid "Package Groups" +msgid "&Manage Groups" +msgstr "Paket grupları" + +#: src/include/s390/iucvterminal-server/ui.rb:270 +msgid "Allowed z/VM IDs" +msgstr "" + +#: src/include/s390/iucvterminal-server/ui.rb:285 +#, fuzzy +#| msgid "&Selections" +msgid "&Selection" +msgstr "&Seçimler" + +#. force min size to make it easier readable in terminals +#: src/include/s390/iucvterminal-server/ui.rb:306 +#, fuzzy +#| msgid "&Region" +msgid "&Regex" +msgstr "&Bölge" + +#: src/include/s390/iucvterminal-server/ui.rb:323 +msgid "&File" +msgstr "&Dosya" + +# include/nfs/ui.ycp:93 +#: src/include/s390/iucvterminal-server/ui.rb:339 +msgid "Bro&wse" +msgstr "&Göz at" + +#. force min size to make it easier readable in terminals +#: src/include/s390/iucvterminal-server/ui.rb:366 +msgid "&Audited IDs" +msgstr "" + +#: src/include/s390/iucvterminal-server/ui.rb:388 +msgid "&Enable IUCVConn on Login" +msgstr "" + +# include/security/ui.ycp:695 +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:401 +msgid "Login" +msgstr "Kullanıcı girişi" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:403 +msgid "UID" +msgstr "UID (Kullanıcı belirticisi)" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:405 +#, fuzzy +#| msgid "Home Path" +msgid "Home" +msgstr "Ev dizini yolu" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:407 +msgid "Shell" +msgstr "Kabuk" + +# include/sound/ui.ycp:179 +#: src/include/s390/iucvterminal-server/ui.rb:415 +#, fuzzy +#| msgid "Settings for Zone: " +msgid "Settings for new Users" +msgstr "Ayarlanan bölge: " + +#: src/include/s390/iucvterminal-server/ui.rb:421 +#: src/include/s390/iucvterminal-server/ui.rb:496 +msgid "&Password" +msgstr "&Parola" + +# +#: src/include/s390/iucvterminal-server/ui.rb:430 +#: src/include/s390/iucvterminal-server/ui.rb:502 +#, fuzzy +#| msgid "C&onfirm Password" +msgid "Co&nfirm Password" +msgstr "Şifreyi &onaylayın" + +#: src/include/s390/iucvterminal-server/ui.rb:445 +#: src/include/s390/iucvterminal-server/ui.rb:487 +msgid "&Home Directory" +msgstr "E&v dizini" + +# include/nfs/ui.ycp:93 +#: src/include/s390/iucvterminal-server/ui.rb:448 +#: src/include/s390/iucvterminal-server/ui.rb:491 +#, fuzzy +#| msgid "&Browse" +msgid "B&rowse" +msgstr "&Göz at" + +#: src/include/s390/iucvterminal-server/ui.rb:452 +msgid "&Sync" +msgstr "" + +#. initialize list with additional groups +#: src/include/s390/iucvterminal-server/ui.rb:479 +msgid "&Username" +msgstr "&Kullanıcı adı" + +# include/security/ui.ycp:791 +#: src/include/s390/iucvterminal-server/ui.rb:509 +#, fuzzy +#| msgid "Last Password Change: %1" +msgid "&Force Password Change" +msgstr "Son parola değişikliği: %1" + +#: src/include/s390/iucvterminal-server/ui.rb:522 +#, fuzzy +#| msgid "Additional &LDAP Groups" +msgid "&Additonal Groups" +msgstr "Ek &LDAP grupları" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:547 +msgid "TS-Auth" +msgstr "" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:549 +#, fuzzy +#| msgid "GID:" +msgid "GID" +msgstr "GID:" + +#. table header +#: src/include/s390/iucvterminal-server/ui.rb:551 +#, fuzzy +#| msgid "Membership" +msgid "TS-Members" +msgstr "Üyelik" + +# clients/inst_sw_single.ycp:1553 +#: src/include/s390/iucvterminal-server/ui.rb:556 +msgid "&Select or Deselect" +msgstr "&Seç ya da seçimi kaldır" + +# clients/lan_inetd_custom.ycp:762 +#: src/include/s390/iucvterminal-server/ui.rb:558 +#, fuzzy +#| msgid "Create" +msgid "C&reate" +msgstr "Oluştur" + +#: src/include/s390/iucvterminal-server/ui.rb:560 +#, fuzzy +#| msgid "&NIS Groups" +msgid "&New Group" +msgstr "N&IS grupları" + +#: src/include/s390/iucvterminal-server/ui.rb:570 +#, fuzzy +#| msgid "Membership" +msgid "TS-&Members" +msgstr "Üyelik" + +#. draw active tab +#: src/include/s390/iucvterminal-server/ui.rb:595 +msgid "&z/VM IDs" +msgstr "" + +#: src/include/s390/iucvterminal-server/ui.rb:596 +#, fuzzy +#| msgid "Shell" +msgid "&TS-Shell" +msgstr "Kabuk" + +#: src/include/s390/iucvterminal-server/ui.rb:597 +#, fuzzy +#| msgid "IUCV" +msgid "&IUCVConn" +msgstr "IUCV" + +# include/partitioning/custom_part_dialogs.ycp:120 +#. check and commit password +#: src/include/s390/iucvterminal-server/ui.rb:711 +#, fuzzy +#| msgid "" +#| "The passwords do not match.\n" +#| "Try again." +msgid "The passwords do not match or are invalid." +msgstr "" +"Parolalar birbirini tutmuyor.\n" +"Tekrar deneyin." + +#. check if the user specifcation is valid and if the name does already exist +#: src/include/s390/iucvterminal-server/ui.rb:717 +#, fuzzy +#| msgid "The hostname is invalid." +msgid "The username is not valid!" +msgstr "Bilgisayar adı geçersiz." + +# clients/inst_source.ycp:178 +#: src/include/s390/iucvterminal-server/ui.rb:721 +#, fuzzy +#| msgid "Home directory of the user" +msgid "A home directory has to be specified!" +msgstr "Kullanıcının ev dizini" + +#: src/include/s390/iucvterminal-server/ui.rb:757 +#, fuzzy +#| msgid "Reading the settings failed." +msgid "Adding the user has failed." +msgstr "Ayarlar okunamadı." + +#. delete group entry if disabled +#: src/include/s390/iucvterminal-server/ui.rb:861 +#, fuzzy +#| msgid "Configure General Settings " +msgid "Configure IUCV Terminal Server Settings" +msgstr "Genel ayarları yap" + +#. update screen +#: src/include/s390/iucvterminal-server/ui.rb:881 +#, fuzzy +#| msgid "New System User" +msgid "New TS-Shell User" +msgstr "Yeni sistem kullanıcısı" + +#: src/include/s390/iucvterminal-server/ui.rb:894 +msgid "Manage Groups for TS-Authorization" +msgstr "" + +#. since alnum allows umlauts too the id is checked against the user name specification +#: src/include/s390/iucvterminal-server/ui.rb:1020 +msgid "Wrong z/VM ID \"%1\" in line %2, only letters and numbers are allowed." +msgstr "" + +#: src/include/s390/iucvterminal-server/ui.rb:1032 +msgid "Wrong z/VM ID \"%1\" in line %2, numbers at the beginning are not allowed." +msgstr "" + +#: src/include/s390/iucvterminal-server/ui.rb:1044 +msgid "Wrong z/VM ID \"%1\" in line %2, more than eight characters are not allowed." +msgstr "" + +#. only the last entry is allowed to be empty +#: src/include/s390/iucvterminal-server/ui.rb:1057 +msgid "Wrong z/VM ID \"%1\" in line %2, at least one letter is required." +msgstr "" + +#. check password +#: src/include/s390/iucvterminal-server/ui.rb:1081 +msgid "A correctly entered password to sync IUCVConn users is required." +msgstr "" + +#. check home directory +#: src/include/s390/iucvterminal-server/ui.rb:1087 +#, fuzzy +#| msgid "User name or home directory is not valid." +msgid "The specified IUCVConn home directory is invalid." +msgstr "Kullanıcı adı ya da ev dizini geçersiz." + +#. update ts member selection +#: src/include/s390/iucvterminal-server/ui.rb:1437 +#, fuzzy +#| msgid "The hostname is invalid." +msgid "The group name is not valid!" +msgstr "Bilgisayar adı geçersiz." + +#. change tab selection back +#. check for z/VM ID entries +#: src/include/s390/iucvterminal-server/ui.rb:1497 +#: src/include/s390/iucvterminal-server/ui.rb:1598 +msgid "Cannot configure the terminal server without valid z/VM IDs." +msgstr "" + +#. Check the "Allowed Terminal Server list" field for validity. +#. @return true for valid inputs +#: src/include/s390/iucvterminal/ui.rb:55 +msgid "Wrong input, only lower case letters, numbers and for separation commas are allowed." +msgstr "" + +#: src/include/s390/iucvterminal/ui.rb:60 +msgid "Comma is only a separator." +msgstr "" + +#: src/include/s390/iucvterminal/ui.rb:62 +msgid "z/VM IDs do not allow more than eight characters." +msgstr "" + +#. Terminal id counting starts with 0 +#: src/include/s390/iucvterminal/ui.rb:79 +msgid "Wrong IUCV ID, only lower case letters are allowed." +msgstr "" + +#: src/include/s390/iucvterminal/ui.rb:83 +#, fuzzy +#| msgid "The scheme name must not be longer than 32 characters." +msgid "IUCV IDs cannot be longer than %1 chars." +msgstr "Şema adının uzunluğu 32 karakterden fazla olamaz." + +#. IUCVTerminal dialog help 1/10 +#: src/include/s390/iucvterminal/ui.rb:121 +msgid "<p><h2>Configure Local Terminal System Settings</h2></p>" +msgstr "" + +# clients/support_question.ycp:109 +#. IUCVTerminal dialog help 2/11 +#: src/include/s390/iucvterminal/ui.rb:123 +#, fuzzy +#| msgid "<p><b>Congratulations!</b></p>" +msgid "<p><b>IUCVtty</b></p>" +msgstr "<p><b>Tebrikler!</b></p>" + +#. IUCVTerminal dialog help 3/11 +#: src/include/s390/iucvterminal/ui.rb:125 +msgid "<p>Several <b>IUCVtty instances</b> can run to provide multiple terminal devices. The instances are distinguished by a terminal ID, which is a combination of the <b>Terminal ID Prefix</b> and the number of the instance.<br>" +msgstr "" + +#. IUCVTerminal dialog help 4/11 +#: src/include/s390/iucvterminal/ui.rb:129 +msgid "For example, if you define ten instances with the prefix "<i>lxterm</i>", the terminal IDs from <i>lxterm0</i> to <i>lxterm9</i> are available.</p>" +msgstr "" + +#. IUCVTerminal dialog help 5/11 +#: src/include/s390/iucvterminal/ui.rb:133 +#, fuzzy +#| msgid "<p><b>Welcome!</b></p>" +msgid "<p><b>HVC</b></p>" +msgstr "<p><b>Hoş geldiniz!</b></p>" + +#. IUCVTerminal dialog help 6/11 +#: src/include/s390/iucvterminal/ui.rb:135 +msgid "<p>The z/VM IUCV HVC device driver is a kernel module and uses device nodes to enable up to eight HVC terminal devices to communicate with getty and login programs.</p>" +msgstr "" + +#. IUCVTerminal dialog help 7/11 +#: src/include/s390/iucvterminal/ui.rb:139 +msgid "<p>With <b>restrict access</b>, allow only connections from certain <b>terminal servers</b>.</p>" +msgstr "" + +#. IUCVTerminal dialog help 8/11 +#: src/include/s390/iucvterminal/ui.rb:143 +msgid "<p>Define the emulation for all instances at once or for each one separately.</p>" +msgstr "" + +#. IUCVTerminal dialog help 9/11 +#: src/include/s390/iucvterminal/ui.rb:147 +msgid "" +"<p>Activate <b>route kernel messages to hvc0</b> to route kernel messages to\n" +"the hvc0 device instead of ttyS0.<br>" +msgstr "" + +#. IUCVTerminal dialog help 10/11 +#: src/include/s390/iucvterminal/ui.rb:151 +msgid "Should kernel messages still be shown on ttyS0, manually add <b>console=ttyS0</b> to the current boot selection kernel parameter in the <b>YaST bootloader module</b>.</p>" +msgstr "" + +#. IUCVTerminal dialog help 11/11 +#: src/include/s390/iucvterminal/ui.rb:155 +msgid "<h3>Warning: HVC Terminals stay logged on without a manual logout through the shortcut: ctrl _ d</h3>" +msgstr "" + +#. Dialog content +#: src/include/s390/iucvterminal/ui.rb:168 +#, fuzzy +#| msgid "IUCV" +msgid "&IUCVtty" +msgstr "IUCV" + +#: src/include/s390/iucvterminal/ui.rb:176 +#, fuzzy +#| msgid "&Dial Prefix" +msgid "Terminal ID &Prefix" +msgstr "&Arama ön eki" + +#: src/include/s390/iucvterminal/ui.rb:182 +msgid "I&UCVtty instances" +msgstr "" + +#: src/include/s390/iucvterminal/ui.rb:196 +msgid "HVC" +msgstr "" + +#: src/include/s390/iucvterminal/ui.rb:206 +msgid "H&VC instances" +msgstr "" + +#: src/include/s390/iucvterminal/ui.rb:217 +msgid "Restrict &access to" +msgstr "" + +# include/runlevel/ui.ycp:429 +#: src/include/s390/iucvterminal/ui.rb:223 +#, fuzzy +#| msgid "Allowed Services" +msgid "Allowed Terminal &Servers" +msgstr "İzin Verilen Hizmetler" + +#: src/include/s390/iucvterminal/ui.rb:231 +msgid "route &kernel messages to hvc0" +msgstr "" + +# include/nis_server/ui.ycp:56 +#. if settings were changed don't exit without asking +#: src/include/s390/iucvterminal/ui.rb:324 +#, fuzzy +#| msgid "Really exit configuration without saving ?" +msgid "Really leave without saving?" +msgstr "Yapılandırma kaydedilmeden kapatılsın mı?" + +#. check iucv id +#: src/include/s390/iucvterminal/ui.rb:333 +#, fuzzy +#| msgid "' is not valid." +msgid "The IUCV ID is not valid." +msgstr "' geçersiz." + +#. check restrict_hvc_to_srvs and make sure they doesn't end with a comma +#: src/include/s390/iucvterminal/ui.rb:343 +#, fuzzy +#| msgid "Entered addresses are not valid." +msgid "The Terminal Servers are not valid." +msgstr "Girilmiş adresler geçersiz." + +#. check if the bootloader settings need to be adjusted +#: src/include/s390/iucvterminal/ui.rb:366 +#, fuzzy +#| msgid "" +#| "The domain has changed.\n" +#| "You must reboot for the changes to take effect." +msgid "The system has to be rebooted for some changes to take effect." +msgstr "" +"Alan değiştirildi.\n" +"Değişikliklerin etkinleşmesi için sistemi yeniden başlatın." + +#. only five lines are allowed, remove every additional line +#: src/include/s390/onpanic/ui.rb:63 +#, fuzzy +#| msgid "Only 128 characters are allowed in report names." +msgid "Only %1 lines are allowed for VMCMD." +msgstr "Rapor adında en fazla 128 karaktere izin verilir." + +#. For translators: Caption of the dialog +#: src/include/s390/onpanic/ui.rb:109 +#, fuzzy +#| msgid "Basic Configuration" +msgid "On Panic Configuration" +msgstr "Temel yapılandırma" + +#. OnPanic dialog help 1/11 +#: src/include/s390/onpanic/ui.rb:112 +msgid "<p><b>Configure the actions to be taken if a kernel panic occurs</b></p>" +msgstr "" + +#. OnPanic dialog help 2/11 +#: src/include/s390/onpanic/ui.rb:116 +msgid "<p>The <b>Dumpconf</b> daemon needs to be enabled to influence the behavior during kernel panics.</p>" +msgstr "" + +#. OnPanic dialog help 3/11 +#: src/include/s390/onpanic/ui.rb:120 +msgid "<p>The following <b>Panic Actions</b> are possible:<br>" +msgstr "" + +#. OnPanic dialog help 4/11 +#: src/include/s390/onpanic/ui.rb:122 +msgid "<b>stop</b> Stop Linux (default).<br>" +msgstr "" + +#. OnPanic dialog help 5/11 +#: src/include/s390/onpanic/ui.rb:124 +msgid "<b>dump</b> Dump Linux and stop system.<br>" +msgstr "" + +#. OnPanic dialog help 6/11 +#: src/include/s390/onpanic/ui.rb:126 +msgid "<b>reipl</b> Reboot Linux.<br>" +msgstr "" + +#. OnPanic dialog help 7/11 +#: src/include/s390/onpanic/ui.rb:128 +msgid "" +"<b>dump_reipl</b> Dump Linux and reboot system. This option is only available\n" +"on LPAR with z9(r) machines and later and on z/VMversion 5.3 and later.<br>" +msgstr "" + +#. OnPanic dialog help 8/11 +#: src/include/s390/onpanic/ui.rb:132 +msgid "<b>vmcmd</b> Execute specified CP commands and stop system.</p>" +msgstr "" + +#. OnPanic dialog help 9/11 +#: src/include/s390/onpanic/ui.rb:134 +msgid "<p>The time defined in <b>Delay Minutes</b> defers activating the specified panic action for a newly started system to prevent loops. If the system crashes before the time has elapsed the default action (stop) is performed.</p>" +msgstr "" + +#. OnPanic dialog help 10/11 +#: src/include/s390/onpanic/ui.rb:138 +msgid "<p>The device for dumping the memory can be set with <b>Dump Device</b>. If no device is shown you have to create one with the <b>YaST Dump Devices</b> dialog.</p>" +msgstr "" + +#. OnPanic dialog help 11/11 +#: src/include/s390/onpanic/ui.rb:143 +msgid "<p>With <b>VMCMD</b> specify CP commands to be executed before the Linux system is stopped. Only %1 lines and a total of %2 chars are allowed.</p>" +msgstr "" + +#. radio button label +#: src/include/s390/onpanic/ui.rb:166 +#, fuzzy +#| msgid "Do No&t Start IrDA" +msgid "Do No&t Start Dumpconf" +msgstr "Kızılötesi'ni başlat&ma" + +# include/ui/wizard_hw.ycp:51 +#. radio button label +#: src/include/s390/onpanic/ui.rb:175 +#, fuzzy +#| msgid "Start Detection" +msgid "&Start Dumpconf" +msgstr "Algılamayı başlat" + +#. combobox label +#: src/include/s390/onpanic/ui.rb:189 +#, fuzzy +#| msgid "&Action" +msgid "&Panic Action" +msgstr "&Hareket" + +# clients/ui_widgets.ycp:196 clients/ui_widgets.ycp:224 +#: src/include/s390/onpanic/ui.rb:192 +#, fuzzy +#| msgid "&Minute" +msgid "Delay &Minutes" +msgstr "&Dakika" + +#. combobox label +#: src/include/s390/onpanic/ui.rb:202 +#, fuzzy +#| msgid "&Device" +msgid "&Dump Device" +msgstr "&Aygıt" + +#: src/include/s390/onpanic/ui.rb:206 +msgid "&VMCMD" +msgstr "" + +# clients/inst_custom_part.ycp:3159 +#. don't allow dumps if no device is available +#: src/include/s390/onpanic/ui.rb:267 +#, fuzzy +#| msgid "It is not possible to create a partition on %1 " +msgid "It is not possible to enable the dump process without a dump device." +msgstr "%1 üzerinde yeni bir bölüm oluşturmak olanaksız." + +#. don't allow vmcmd without at least one command +#: src/include/s390/onpanic/ui.rb:281 +#, fuzzy +#| msgid "It was not possible to revert the already made changes" +msgid "It is not possible to use vmcmd without defining at least one command." +msgstr "Yapılan değişikliklerden vazgeçip eski ayarlara dönmek mümkün olmadı" + +#. Dialog caption +#: src/include/s390/zfcp/dialogs.rb:113 +#, fuzzy +#| msgid "Configured Devices:" +msgid "Configured ZFCP Devices" +msgstr "Yapılandırılmış aygıtlar:" + +#. table header +#. table header +#: src/include/s390/zfcp/dialogs.rb:122 src/include/s390/zfcp/dialogs.rb:131 +msgid "WWPN" +msgstr "" + +#. table header +#. table header +#: src/include/s390/zfcp/dialogs.rb:124 src/include/s390/zfcp/dialogs.rb:133 +msgid "LUN" +msgstr "" + +#. yes-no popup +#. yes-no popup +#: src/include/s390/zfcp/dialogs.rb:238 src/include/s390/zfcp/dialogs.rb:391 +#, fuzzy +#| msgid "" +#| "Really leave the DHCP server configuration without saving?\n" +#| "All changes will be lost." +msgid "" +"Really leave the ZFCP device configuration without saving?\n" +"All changes will be lost." +msgstr "" +"DHCP yapılandırmasından kaydetmeden çıkmak istediğinize emin misiniz?\n" +"Tüm değişiklikler kaybolacaktır." + +# clients/hwinfo.ycp:80 +#. dialog caption +#: src/include/s390/zfcp/dialogs.rb:259 +#, fuzzy +#| msgid "All Network Devices" +msgid "Add New ZFCP Device" +msgstr "Tüm ağ aygıtları" + +#. push button +#: src/include/s390/zfcp/dialogs.rb:309 +msgid "Get WWPNs" +msgstr "" + +#. combo box +#: src/include/s390/zfcp/dialogs.rb:312 +msgid "&WWPN" +msgstr "" + +#. push button +#: src/include/s390/zfcp/dialogs.rb:319 +msgid "Get LUNs" +msgstr "" + +#. combobox +#: src/include/s390/zfcp/dialogs.rb:322 +msgid "&LUN" +msgstr "" + +#: src/include/s390/zfcp/dialogs.rb:325 +msgid "If no WWPN and no LUN have been defined the system is trying to use allow_lun_scan." +msgstr "" + +#. error popup +#. error popup +#: src/include/s390/zfcp/dialogs.rb:376 src/include/s390/zfcp/dialogs.rb:413 +#, fuzzy +#| msgid "The hostname is invalid." +msgid "The entered WWPN is invalid." +msgstr "Bilgisayar adı geçersiz." + +#. error popup +#: src/include/s390/zfcp/dialogs.rb:421 +#, fuzzy +#| msgid "The hostname is invalid." +msgid "The entered LUN is invalid." +msgstr "Bilgisayar adı geçersiz." + +#. Read dialog help 1/2 +#: src/include/s390/zfcp/helps.rb:36 +#, fuzzy +#| msgid "" +#| "<p><b><big>Initializing DHCP Server Configuration</big></b><br>\n" +#| "Please wait...<br></p>" +msgid "" +"<p><b><big>Initializing ZFCP Device Configuration</big></b><br>\n" +"</p>\n" +msgstr "" +"<p><b><big>DHCP sunucu yapılandırması başlatılıyor</big></b><br>\n" +"Lütfen bekleyin...<br></p>" + +#. Write dialog help 1/2 +#: src/include/s390/zfcp/helps.rb:44 +#, fuzzy +#| msgid "" +#| "<p><b><big>Saving DHCP Server Configuration</big></b><br>\n" +#| "Please wait...<br></p>" +msgid "" +"<p><b><big>Saving ZFCP Device Configuration</big></b><br>\n" +"</p>\n" +msgstr "" +"<p><b><big>DHCP sunucu yapılandırması kaydediliyor</big></b><br>\n" +"Lütfen bekleyin...<br></p>" + +#. Disk selection dialog help 1/3 +#: src/include/s390/zfcp/helps.rb:54 +#, fuzzy +#| msgid "" +#| "<p><b><big>CASA Configuration</big></b><br>\n" +#| "Configure CASA here.<br></p>\n" +msgid "" +"<p><b><big>Configured ZFCP Devices</big></b><br>\n" +"Manage ZFCP devices on your system.</p>\n" +msgstr "" +"<p><b><big>CASA yapılandırması</big></b>\n" +"<br>CASA'yı buradan yapılandırın.<br></p>\n" + +#. Disk selection dialog help 2/3 +#: src/include/s390/zfcp/helps.rb:58 +#, fuzzy +#| msgid "<p>To configure more settings, click <b>Advanced Settings</b>.</p>" +msgid "<p>To configure a new ZFCP device, click <b>Add</b>.</p>" +msgstr "<p>Daha fazla ayar için <b>Gelişmiş ayarlar</b> düğmesini kullanın.</p>" + +#. Disk selection dialog help 3/3 +#: src/include/s390/zfcp/helps.rb:60 +#, fuzzy +#| msgid "<p>To remove an option, select it and click <b>Delete</b>.</p>" +msgid "" +"<p>To remove a configured ZFCP device, select it and click\n" +"<b>Delete</b>.</p>" +msgstr "<p>Bir seçeneği silmek için seçip <b>Sil</b> düğmesine basın.</p>" + +# include/ui/common_messages.ycp:91 +#. Disk selection dialog Warning +#. Disk selection dialog Warning +#: src/include/s390/zfcp/helps.rb:64 src/include/s390/zfcp/helps.rb:88 +#, fuzzy +#| msgid "Warning" +msgid "<h1>Warning</h1>" +msgstr "Uyarı" + +#: src/include/s390/zfcp/helps.rb:65 src/include/s390/zfcp/helps.rb:89 +msgid "" +"<p>When accessing a ZFCP device\n" +"<b>READ</b>/<b>WRITE</b>, make sure that this access is exclusive.\n" +"Otherwise there is a potential risk of data corruption.</p>" +msgstr "" + +#. Disk add help 1/2 +#: src/include/s390/zfcp/helps.rb:71 +msgid "" +"<p><b><big>Add New ZFCP Device</big></b><br>\n" +"Enter the identifier of the device to add, the\n" +"<b>Channel ID</b> of the ZFCP controller, the worldwide port number\n" +"(<b>WWPN</b>) and the <b>LUN</b> number.</p>\n" +msgstr "" + +#. Disk add help 2/2, This is HTML, so finally "<devno>" is displayed as "<devno>" +#: src/include/s390/zfcp/helps.rb:78 +msgid "" +"<p>The <b>Channel ID</b> must be entered with lowercase letters in a sysfs conforming\n" +"format 0.0.<devno>, such as <tt>0.0.5c51</tt>.</p>\n" +"<p>The WWPN must be entered with lowercase letters as a 16-digit hex value, such as\n" +"<tt>0x5005076300c40e5a</tt>.</p>\n" +"<p>The LUN must be entered with lowercase letters as a 16-digit hex value with\n" +"all trailing zeros, such as <tt>0x52ca000000000000</tt>.</p><p>If no WWPN <b>and</b> no LUN have been defined the system is trying to use allow_lun_scan.</p>" +msgstr "" + +#. popup label +#. popup label +#: src/modules/DASDController.rb:187 src/modules/ZFCPController.rb:163 +#, fuzzy +#| msgid "Running kinternet" +msgid "Running mkinitrd." +msgstr "Kinternet programı çalıştırılıyor" + +#. Create a textual summary and a list of configured devices +#. @return summary of the current configuration +#: src/modules/DASDController.rb:333 +msgid "Channel ID: %1, Format: %2, DIAG: %3" +msgstr "" + +#: src/modules/DASDController.rb:346 +msgid "Channel ID: %1, Device: %2, DIAG: %3" +msgstr "" + +#. popup label +#: src/modules/DASDController.rb:381 +#, fuzzy +#| msgid "&Read Configuration Saved on Disk" +msgid "Reading Configured DASD Disks" +msgstr "&Diskete kayıtlı yapılandırmayı oku" + +#. error report, %1 is device identification +#. error report, %1 is device identification +#. error report, %1 is device identification +#: src/modules/DASDController.rb:472 src/modules/ZFCPController.rb:446 +#: src/modules/ZFCPController.rb:540 +msgid "%1: sysfs not mounted." +msgstr "" + +#. error report, %1 is device identification +#. error report, %1 is device identification +#. error report, %1 is device identification +#: src/modules/DASDController.rb:480 src/modules/ZFCPController.rb:454 +#: src/modules/ZFCPController.rb:548 +msgid "%1: Invalid status for <online>." +msgstr "" + +#. error report, %1 is device identification +#. error report, %1 is device identification +#: src/modules/DASDController.rb:488 src/modules/ZFCPController.rb:462 +msgid "%1: No device found for <ccwid>." +msgstr "" + +#. error report, %1 is device identification +#: src/modules/DASDController.rb:496 +#, fuzzy +#| msgid "Could not check the MD5 sum of the firmware." +msgid "%1: Could not change state of the device." +msgstr "Ürün Bilgisinin MD5 özeti kontrol edilemedi." + +#. error report, %1 is device identification +#: src/modules/DASDController.rb:505 +msgid "%1: Device is not a DASD." +msgstr "" + +#. error report, %1 is device identification +#: src/modules/DASDController.rb:514 +#, fuzzy +#| msgid "Could not load module %1." +msgid "%1: Could not load module." +msgstr "%1 modülü yüklenemiyor." + +#. error report, %1 is device identification +#: src/modules/DASDController.rb:523 +msgid "%1: Failed to activate DASD." +msgstr "" + +# +# clients/inst_custom_part.ycp:1499 +#. error report, %1 is device identification +#: src/modules/DASDController.rb:532 +#, fuzzy +#| msgid "Do ¬ format" +msgid "%1: DASD is not formatted." +msgstr "B&içimlendirme" + +# include/cups/ui.ycp:2577 include/cups/ui.ycp:2598 +#. error report, %1 is device identification, %2 is integer code +#. error report, %1 is device identification, %2 is integer code +#. error report, %1 is device identification, %2 is integer code +#: src/modules/DASDController.rb:540 src/modules/ZFCPController.rb:518 +#: src/modules/ZFCPController.rb:596 +#, fuzzy +#| msgid "Unknown Error Code" +msgid "%1: Unknown error %2." +msgstr "Bilinmeyen hata kodu" + +# clients/inst_prepdisk.ycp:360 +#. progress bar +#: src/modules/DASDController.rb:653 +#, fuzzy +#| msgid "Formatting %1" +msgid "Formatting %1:" +msgstr "%1 biçimlendiriliyor" + +#. error report, %1 is exit code of the command (integer) +#. error report, %1 is exit code of the command (integer) +#: src/modules/DASDController.rb:682 src/modules/DASDController.rb:779 +msgid "Disks formatting failed. Exit code: %1." +msgstr "" + +# clients/inst_prepdisk.ycp:360 +#. progress bar, %1 is device name, %2 and %3 +#. integers, +#. eg. Formatting /dev/dasda: cylinder 123 of 12334 done +#: src/modules/DASDController.rb:750 +#, fuzzy +#| msgid "Formatting %1 as %2" +msgid "Formatting %1: cylinder %2 of %3 done" +msgstr "%1 %2 olarak biçimlendiriliyor" + +#. Get a List of available Disks of type +#. @return [Array<String>] of disks +#: src/modules/Dump.rb:67 +#, fuzzy +#| msgid "Checking file system..." +msgid "Checking Disks" +msgstr "Dosya sistemi kontrol ediliyor..." + +# clients/inst_sw_single.ycp:742 +#. Progress stage 1/2 +#: src/modules/Dump.rb:76 +#, fuzzy +#| msgid "Checking Dependencies..." +msgid "Checking DASD disks" +msgstr "Bağımlılıklar kontrol ediliyor..." + +#. Progress stage 2/2 +#: src/modules/Dump.rb:78 +msgid "Checking ZFCP disks" +msgstr "" + +# clients/inst_sw_single.ycp:742 +#. Progress step 1/2 +#: src/modules/Dump.rb:82 +#, fuzzy +#| msgid "Checking Dependencies..." +msgid "Checking DASD disks..." +msgstr "Bağımlılıklar kontrol ediliyor..." + +#. Progress step 2/2 +#: src/modules/Dump.rb:84 +#, fuzzy +#| msgid "Checking versions..." +msgid "Checking ZFCP disks..." +msgstr "Sürümler kontrol ediliyor..." + +# clients/lan_inetd.ycp:54 clients/lan_inetd_custom.ycp:792 clients/lan_inetd_start.ycp:146 clients/lan_inetd_start.ycp:158 +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#. Progress finished +#: src/modules/Dump.rb:86 src/modules/Dump.rb:121 +#: src/modules/IUCVTerminal.rb:165 src/modules/IUCVTerminal.rb:246 +#: src/modules/IUCVTerminalServer.rb:334 src/modules/IUCVTerminalServer.rb:478 +#: src/modules/OnPanic.rb:234 src/modules/OnPanic.rb:276 +msgid "Finished" +msgstr "Sonlandı" + +# include/cups/ui.ycp:473 +#. Format a disk as DUMP device +#. @param [String] dev string the disk device node +#. @param [Boolean] force boolean true to append the -f parameter +#. @return [Boolean] true on success +#: src/modules/Dump.rb:106 +#, fuzzy +#| msgid "Creating crypt file %1" +msgid "Creating Dump Device" +msgstr "Şifrelenmiş dosya %1 oluşturuluyor" + +# include/cups/ui.ycp:473 +#. Progress stage 1/1 +#: src/modules/Dump.rb:115 +#, fuzzy +#| msgid "Creating crypt file %1" +msgid "Creating dump device" +msgstr "Şifrelenmiş dosya %1 oluşturuluyor" + +# clients/inst_rpmupdate.ycp:28 +#. Progress step 1/1 +#: src/modules/Dump.rb:119 +#, fuzzy +#| msgid "Converting package database. This process can take some time." +msgid "Creating dump device. This process might take some minutes." +msgstr "Paket veritabanı dönüştürülüyor. Bu işlem biraz zaman alabilir." + +#. error description +#: src/modules/Dump.rb:148 +#, fuzzy +#| msgid "Invalid or Obsolete Lines in fstab:" +msgid "Invalid or unusable disk (fatal)." +msgstr "fstab içindeki geçersiz ya da eski satırlar:" + +#. error description +#: src/modules/Dump.rb:151 +msgid "Incompatible formatting or partitioning, correct with Force." +msgstr "" + +#. error description +#: src/modules/Dump.rb:156 +msgid "Missing support programs." +msgstr "" + +#. error description +#: src/modules/Dump.rb:159 +#, fuzzy +#| msgid "Missing parameter '%1'." +msgid "Missing or wrong parameters." +msgstr "'%1' parametresi eksik." + +# include/cups/ui.ycp:264 +#. error description +#: src/modules/Dump.rb:162 +#, fuzzy +#| msgid "Access Type" +msgid "Access problem." +msgstr "Erişim türü" + +#. error description, %1 is error code (integer) +#: src/modules/Dump.rb:165 +msgid "Error code from support program: %1." +msgstr "" + +#. error report, %1 is device name, %2 error description +#: src/modules/Dump.rb:169 +#, fuzzy +#| msgid "Cannot start device %1." +msgid "" +"Cannot create dump device %1:\n" +"%2" +msgstr "'%1 aygıtı başlatılamıyor." + +#. Read all settings +#. @return true on success +#: src/modules/IUCVTerminal.rb:142 +#, fuzzy +#| msgid "Reading the Configuration" +msgid "Loading IUCV Terminal Configuration" +msgstr "Yapılandırma okunuyor" + +#. Progress stage 1/3 +#: src/modules/IUCVTerminal.rb:151 +#, fuzzy +#| msgid "Check fstab Entries" +msgid "Check IUCVtty entries" +msgstr "fstab girdilerini kontrol et" + +#. Progress stage 2/3 +#: src/modules/IUCVTerminal.rb:153 +#, fuzzy +#| msgid "Check fstab Entries" +msgid "Check HVC entries" +msgstr "fstab girdilerini kontrol et" + +#. Progress stage 3/3 +#: src/modules/IUCVTerminal.rb:155 +#, fuzzy +#| msgid "Modem parameters" +msgid "Read kernel parameters" +msgstr "Modem parametreleri" + +#. Progress step 1/3 +#: src/modules/IUCVTerminal.rb:159 +#, fuzzy +#| msgid "Checking fstab entries" +msgid "Checking IUCVtty entries..." +msgstr "fstab girdileri kontrol ediliyor" + +#. Progress step 2/3 +#: src/modules/IUCVTerminal.rb:161 +#, fuzzy +#| msgid "Checking fstab entries" +msgid "Checking HVC entries..." +msgstr "fstab girdileri kontrol ediliyor" + +#. Progress step 3/3 +#: src/modules/IUCVTerminal.rb:163 +#, fuzzy +#| msgid "Reading general settings..." +msgid "Reading kernel parameters..." +msgstr "Genel ayarlar okunuyor..." + +#. Inittab write dialog caption +#: src/modules/IUCVTerminal.rb:223 +#, fuzzy +#| msgid "Saving IrDA Configuration" +msgid "Saving IUCV Terminal Configuration" +msgstr "Kızılötesi yapılandırması kaydediliyor" + +#. Progress stage 1/4 +#: src/modules/IUCVTerminal.rb:232 +#, fuzzy +#| msgid "Write IRC settings" +msgid "Write IUCVtty settings" +msgstr "IRC ayarlarını yaz" + +#. Progress stage 2/4 +#: src/modules/IUCVTerminal.rb:234 +#, fuzzy +#| msgid "Write IRC settings" +msgid "Write HVC settings" +msgstr "IRC ayarlarını yaz" + +#. Progress stage 3/4 +#: src/modules/IUCVTerminal.rb:236 +#, fuzzy +#| msgid "Provider Parameters" +msgid "Write kernel parameters" +msgstr "Servis sağlayıcı parametreleri" + +#. Progress step 1/4 +#: src/modules/IUCVTerminal.rb:240 +#, fuzzy +#| msgid "Writing IRC settings..." +msgid "Writing IUCVtty settings..." +msgstr "IRC ayarları yazılıyor..." + +#. Progress step 2/4 +#: src/modules/IUCVTerminal.rb:242 +#, fuzzy +#| msgid "Writing IRC settings..." +msgid "Writing HVC settings..." +msgstr "IRC ayarları yazılıyor..." + +#. Progress step 3/4 +#: src/modules/IUCVTerminal.rb:244 +#, fuzzy +#| msgid "Writing general settings..." +msgid "Writing kernel parameters..." +msgstr "Genel ayarlar kaydediliyor..." + +#. Text to select all +#: src/modules/IUCVTerminalServer.rb:43 +msgid "<ALL>" +msgstr "" + +#. Read all settings +#. @return true on success +#: src/modules/IUCVTerminalServer.rb:315 +#, fuzzy +#| msgid "Saving DHCP Server Configuration" +msgid "Loading IUCV Terminal Server Configuration" +msgstr "DHCP sunucu yapılandırması kaydediliyor" + +# clients/sw_single.ycp:310 +#. Progress stage 1/2 +#: src/modules/IUCVTerminalServer.rb:324 +#, fuzzy +#| msgid "Save configuration files" +msgid "Read configuration files" +msgstr "Yapılandırma dosyalarını kaydet" + +#. Progress stage 2/2 +#: src/modules/IUCVTerminalServer.rb:326 +#, fuzzy +#| msgid "Read user settings" +msgid "Load user/group settings" +msgstr "Kullanıcı ayarlarını oku" + +# clients/sw_single.ycp:310 +#. Progress step 1/2 +#: src/modules/IUCVTerminalServer.rb:330 +#, fuzzy +#| msgid "Saving configuration files..." +msgid "Reading configuration files..." +msgstr "Yapılandırma dosyaları kaydediliyor..." + +#. Progress step 2/2 +#: src/modules/IUCVTerminalServer.rb:332 +#, fuzzy +#| msgid "Reading user settings..." +msgid "Loading user/group settings..." +msgstr "Kullanıcı ayarları okunuyor..." + +#. no need to write anything if unmodified +#: src/modules/IUCVTerminalServer.rb:459 +#, fuzzy +#| msgid "Saving DHCP Server Configuration" +msgid "Saving IUCV Terminal Server Configuration" +msgstr "DHCP sunucu yapılandırması kaydediliyor" + +#. Progress stage 1/2 +#: src/modules/IUCVTerminalServer.rb:468 +#, fuzzy +#| msgid "Write configuration" +msgid "Write configuration files" +msgstr "Yapılandırmayı yaz" + +#. Progress stage 2/2 +#: src/modules/IUCVTerminalServer.rb:470 +#, fuzzy +#| msgid "Write user settings" +msgid "Update user settings" +msgstr "Kullanıcı ayarlarını yaz" + +#. Progress step 1/2 +#: src/modules/IUCVTerminalServer.rb:474 +#, fuzzy +#| msgid "Writing configuration..." +msgid "Writing configuration files..." +msgstr "Yapılandırma yazılıyor..." + +#. Progress step 2/2 +#: src/modules/IUCVTerminalServer.rb:476 +#, fuzzy +#| msgid "Reading user settings..." +msgid "Updating user settings..." +msgstr "Kullanıcı ayarları okunuyor..." + +#. Dumpconf read dialog caption +#: src/modules/OnPanic.rb:215 +#, fuzzy +#| msgid "Reading the Configuration" +msgid "Reading Dumpconf Configuration" +msgstr "Yapılandırma okunuyor" + +#. Progress stage 1/2 +#: src/modules/OnPanic.rb:224 +#, fuzzy +#| msgid "Checking floppy device..." +msgid "Checking dump devices" +msgstr "Disket sürücüsü kontrol ediliyor..." + +#. Progress stage 2/2 +#: src/modules/OnPanic.rb:226 +#, fuzzy +#| msgid "Reading the settings..." +msgid "Reading settings" +msgstr "Ayarlar okunuyor..." + +#. Progress step 1/2 +#: src/modules/OnPanic.rb:230 +#, fuzzy +#| msgid "Checking floppy device..." +msgid "Checking dump devices..." +msgstr "Disket sürücüsü kontrol ediliyor..." + +#. Progress step 2/2 +#: src/modules/OnPanic.rb:232 +msgid "Reading the settings..." +msgstr "Ayarlar okunuyor..." + +#. Dumpconf write dialog caption +#: src/modules/OnPanic.rb:257 +#, fuzzy +#| msgid "Saving sysconfig Configuration" +msgid "Saving Dumpconf Configuration" +msgstr "sysconfig yapılandırması yazılıyor" + +#. Progress stage 1/2 +#: src/modules/OnPanic.rb:266 +msgid "Write the settings" +msgstr "Ayarları yaz" + +#. Progress stage 2/2 +#: src/modules/OnPanic.rb:268 +msgid "Restart the service" +msgstr "Hizmeti yeniden başlat" + +#. Progress step 1/2 +#: src/modules/OnPanic.rb:272 +msgid "Writing the settings..." +msgstr "Ayarlar yazılıyor..." + +#. Progress step 2/2 +#: src/modules/OnPanic.rb:274 +msgid "Restarting service..." +msgstr "Hizmet yeniden başlatılıyor..." + +#. Create a textual summary and a list of configured devices +#. @return summary of the current configuration +#: src/modules/ZFCPController.rb:304 +msgid "Channel ID: %1, WWPN: %2, LUN: %3" +msgstr "" + +#: src/modules/ZFCPController.rb:313 +msgid "Channel ID: %1, WWPN: %2, LUN: %3, Device: %4" +msgstr "" + +#. TRANSLATORS: warning message +#: src/modules/ZFCPController.rb:372 +msgid "" +"Cannot evaluate ZFCP controllers (e.g. in LPAR).\n" +"You will have to set it manually." +msgstr "" + +#. popup label +#: src/modules/ZFCPController.rb:391 +#, fuzzy +#| msgid "Already Configured Devices:" +msgid "Reading Configured ZFCP Devices" +msgstr "Yapılandırılmış aygıtlar:" + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:470 +#, fuzzy +#| msgid "URL is invalid." +msgid "%1: WWPN invalid." +msgstr "Adres geçersiz." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:478 +#, fuzzy +#| msgid "Could not create crypt file %1" +msgid "%1: Could not activate WWPN for adapter %1." +msgstr "Şifrelenmiş dosya %1 oluşturulamadı." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:486 +#, fuzzy +#| msgid "Could not start IPsec." +msgid "%1: Could not activate ZFCP device." +msgstr "IPsec başlatılamadı." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:494 +#, fuzzy +#| msgid "fstab could not be read." +msgid "%1: SCSI disk could not be deactivated." +msgstr "fstab okunamadı." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:502 +#, fuzzy +#| msgid "fstab could not be read." +msgid "%1: LUN could not be unregistered." +msgstr "fstab okunamadı." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:510 +#, fuzzy +#| msgid "fstab could not be read." +msgid "%1: WWPN could not be unregistered." +msgstr "fstab okunamadı." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:556 +#, fuzzy +#| msgid "Service %1 does not exist." +msgid "%1: Device <ccwid> does not exist." +msgstr "%1 hizmeti mevcut değil." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:564 +#, fuzzy +#| msgid "The kernel module for TV support could not be loaded." +msgid "%1: Module zfcp could not be loaded." +msgstr "TV desteği için gerekli çekirdek modülü yüklenemedi." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:572 +#, fuzzy +#| msgid "fstab could not be read." +msgid "%1: Adapter status could not be changed." +msgstr "fstab okunamadı." + +#. error report, %1 is device identification +#: src/modules/ZFCPController.rb:580 +msgid "%1: WWPN ports still active." +msgstr "" + +#. message, %1 is device identification +#: src/modules/ZFCPController.rb:588 +msgid "%1: This host adapter supports allow_lun_scan." +msgstr "" Added: branches/plus-SLE12-SP2/yast/tr/po/smt.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/smt.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/smt.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,1751 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2015-09-25 13:04+0200\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#. TRANSLATORS: error message - the module does not provide command line interface +#. TRANSLATORS: error message - the module does not provide command line interface +#: src/clients/smt-server.rb:29 src/clients/smt.rb:29 +msgid "There is no user interface available for this module." +msgstr "Bu modül için mevcut bir kullanıcı arabirimi yok." + +#. TRANSLATORS: error message +#: src/include/smt/complex.rb:53 +msgid "No URL has been defined. Test cannot proceed." +msgstr "" + +#. At first, credentials need to be written to a temporary file +#. because of security reasons. If used on a commandline, `ps` +#. could reveal them. +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:68 +#, fuzzy +#| msgid "Creating summary..." +msgid "Creating a temporary file..." +msgstr "Özet oluşturuluyor..." + +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:94 +#, fuzzy +#| msgid "Cannot create the file '%1'." +msgid "Cannot create a temporary file %1." +msgstr "'%1' dosysı oluşturulamıyor." + +# clients/inst_sw_single.ycp:742 +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:102 +#, fuzzy +#| msgid "Checking Dependencies..." +msgid "Check credentials..." +msgstr "Bağımlılıklar kontrol ediliyor..." + +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:115 +#, fuzzy +#| msgid "Invalid IP definition." +msgid "Invalid credentials." +msgstr "Geçersiz IP tanımı." + +# clients/sound_volume.ycp:190 +#. TRANSLATORS: LogView line +#: src/include/smt/complex.rb:121 +#, fuzzy +#| msgid "Success" +msgid "Success." +msgstr "Başarılı" + +#. encoding: utf-8 +#. File: include/smt/dialogs.ycp +#. Package: Configuration of smt +#. Summary: Dialogs definitions +#. Authors: Lukas Ocilka <locilka@suse.cz> +#. +#. $Id: dialogs.ycp 27914 2006-02-13 14:32:08Z locilka $ +#: src/include/smt/dialogs.rb:40 +#, fuzzy +#| msgid "&SLP Registration Enabled" +msgid "SCC Registration" +msgstr "&SLP kaydı etkin" + +#: src/include/smt/dialogs.rb:41 +#, fuzzy +#| msgid "Synchronization URL" +msgid "Synchronization of Updates" +msgstr "Senkronizasyon adresi" + +#: src/include/smt/dialogs.rb:44 +#, fuzzy +#| msgid "Location of Archived Reports" +msgid "Generation of Reports" +msgstr "Arşivlenmiş raporların yeri" + +#: src/include/smt/dialogs.rb:47 +msgid "Job Queue Cleanup" +msgstr "" + +#. Patch category +#: src/include/smt/dialogs.rb:111 +msgid "Recommended" +msgstr "Önerilen" + +#. Patch category +#: src/include/smt/dialogs.rb:113 +msgid "Optional" +msgstr "İsteğe bağlı" + +# clients/inst_sw_single.ycp:160 +#. Patch category +#: src/include/smt/dialogs.rb:115 +msgid "Security" +msgstr "Güvenlik" + +# include/x11/video_data_dialog.ycp:66 include/x11/video_data_dialog.ycp:83 +#. opposite to check-mark used in UI, usually not translated +#: src/include/smt/dialogs.rb:126 +msgid "-" +msgstr "-" + +#. Only some repositories support filtering, although +#. snapshots can be created from every repository +#: src/include/smt/dialogs.rb:153 +#, fuzzy +#| msgid "Packages to Update: %1" +msgid "Package manager patches: %1" +msgstr "Güncellenecek Paketler: %1" + +# menuentries/menuentry_security.ycp:37 +#: src/include/smt/dialogs.rb:154 +#, fuzzy +#| msgid "Security Options" +msgid "Security patches: %1" +msgstr "Güvenlik seçenekleri" + +#: src/include/smt/dialogs.rb:155 +#, fuzzy +#| msgid "Recommended" +msgid "Recommended patches: %1" +msgstr "Önerilen" + +# clients/online_update_details.ycp:113 +#: src/include/smt/dialogs.rb:156 +#, fuzzy +#| msgid "Additional Languages: %1" +msgid "Optional patches: %1" +msgstr "Diğer Diller: %1" + +# menuentries/menuentry_sound.ycp:14 +#: src/include/smt/dialogs.rb:166 +msgid "Sunday" +msgstr "Pazar" + +#: src/include/smt/dialogs.rb:167 +msgid "Monday" +msgstr "Pazartesi" + +# /usr/lib/YaST2/keyboard_raw.ycp:668 +#: src/include/smt/dialogs.rb:168 +msgid "Tuesday" +msgstr "Salı" + +#: src/include/smt/dialogs.rb:169 +msgid "Wednesday" +msgstr "Çarşamba" + +#: src/include/smt/dialogs.rb:170 +msgid "Thursday" +msgstr "Perşembe" + +# /usr/lib/YaST2/timezone_raw.ycp:450 +#: src/include/smt/dialogs.rb:171 +msgid "Friday" +msgstr "Cuma" + +#: src/include/smt/dialogs.rb:172 +msgid "Saturday" +msgstr "Cumartesi" + +#. TRANSLATORS: check box +#: src/include/smt/dialogs.rb:191 +msgid "&Enable Subscription Management Tool Service (SMT)" +msgstr "" + +#: src/include/smt/dialogs.rb:198 +#, fuzzy +#| msgid "Co&nvert Current Configuration" +msgid "Customer Center Configuration" +msgstr "&Mevcut yapılandırmayı dönüştür" + +#. TRANSLATORS: check box +#: src/include/smt/dialogs.rb:207 +#, fuzzy +#| msgid "&Use Common Server Certificate" +msgid "&Use Custom Server" +msgstr "&Ortak sunucu sertifikası kullan" + +#. TRANSLATORS: text entry +#: src/include/smt/dialogs.rb:215 +#, fuzzy +#| msgid "&SLP Registration Enabled" +msgid "&Registration Server Url" +msgstr "&SLP kaydı etkin" + +# clients/online_update_load.ycp:380 +#. TRANSLATORS: text entry +#: src/include/smt/dialogs.rb:222 +#, fuzzy +#| msgid "Download Size:" +msgid "&Download Server Url" +msgstr "İndirme boyutu:" + +# clients/lan_inetd_custom.ycp:177 +#. TRANSLATORS: text entry (User name) +#: src/include/smt/dialogs.rb:229 +msgid "&User" +msgstr "&Kullanıcı" + +#. TRANSLATORS: password entry +#: src/include/smt/dialogs.rb:236 +msgid "&Password" +msgstr "&Parola" + +# clients/inst_mouse.ycp:83 +#. TRANSLATORS: push button +#: src/include/smt/dialogs.rb:244 +#, fuzzy +#| msgid "&Test" +msgid "&Test..." +msgstr "&Dene" + +#. TRANSLATORS: text entry (e-mail) +#: src/include/smt/dialogs.rb:257 +msgid "&SCC E-mail Used for Registration" +msgstr "" + +#. TRANSLATORS: text entry (URL) +#: src/include/smt/dialogs.rb:267 +#, fuzzy +#| msgid "Server URL: " +msgid "&Your SMT Server URL" +msgstr "Sunucu adresi: " + +#. TRANSLATORS: password entry +#: src/include/smt/dialogs.rb:290 +#, fuzzy +#| msgid "&Password" +msgid "Database &Password" +msgstr "&Parola" + +# +#. TRANSLATORS: password entry +#: src/include/smt/dialogs.rb:299 +msgid "C&onfirm Password" +msgstr "Şifreyi &onaylayın" + +# clients/ui_widgets.ycp:94 +#: src/include/smt/dialogs.rb:312 +#, fuzzy +#| msgid "List of local groups" +msgid "List of Scheduled Jobs" +msgstr "Yerel grupların listesi" + +#: src/include/smt/dialogs.rb:317 +msgid "Job to Run" +msgstr "" + +# clients/hwinfo.ycp:97 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:319 +msgid "Frequency" +msgstr "Frekans" + +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:321 +#, fuzzy +#| msgid "Day of Week" +msgid "Day of the Week" +msgstr "Haftanın günü" + +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:323 +#, fuzzy +#| msgid "Day of Month" +msgid "Day of the Month" +msgstr "Ayın günü" + +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:325 +msgid "Hour" +msgstr "Saat" + +# include/cups/ui.ycp:342 +#. TRANSLATORS: table header item +#: src/include/smt/dialogs.rb:327 +msgid "Minute" +msgstr "Dakika" + +# include/ui/wizard_hw.ycp:122 +#: src/include/smt/dialogs.rb:333 src/include/smt/dialogs.rb:355 +#, fuzzy +#| msgid "A&dd..." +msgid "&Add..." +msgstr "E&kle..." + +# include/ui/wizard_hw.ycp:64 +#: src/include/smt/dialogs.rb:334 +msgid "&Edit..." +msgstr "&Düzenle..." + +#: src/include/smt/dialogs.rb:350 +#, fuzzy +#| msgid "E-mail address of the server administrator" +msgid "E-mail addresses to send reports to" +msgstr "Sunucu yöneticisinin e-posta adresi" + +# clients/sound_manual.ycp:41 +#. Part of a complex catalogs filter, Item: (List) All (Catalogs) +#: src/include/smt/dialogs.rb:376 src/include/smt/dialogs.rb:1525 +msgid "All" +msgstr "Tümü" + +#: src/include/smt/dialogs.rb:402 src/include/smt/dialogs.rb:2092 +#, fuzzy +#| msgid "Report Name" +msgid "Repository &Name" +msgstr "Rapor adı" + +# clients/online_update_details.ycp:92 +#: src/include/smt/dialogs.rb:407 +#, fuzzy +#| msgid "&Show Patch Category:" +msgid "&Patch Category" +msgstr "&Yama kategorisini göster:" + +# clients/inst_sw_single.ycp:1461 clients/inst_sw_single.ycp:1485 +#: src/include/smt/dialogs.rb:419 +#, fuzzy +#| msgid "Package Name" +msgid "Patch Name" +msgstr "Paket adı" + +# clients/inst_sw_single.ycp:1461 +#: src/include/smt/dialogs.rb:420 +msgid "Version" +msgstr "Sürüm" + +# clients/support_question.ycp:91 +#: src/include/smt/dialogs.rb:421 +msgid "Category" +msgstr "Kategori" + +#: src/include/smt/dialogs.rb:422 +msgid "Testing" +msgstr "" + +#: src/include/smt/dialogs.rb:423 +#, fuzzy +#| msgid "Product" +msgid "Production" +msgstr "Ürün" + +#: src/include/smt/dialogs.rb:424 +msgid "Summary" +msgstr "Özet" + +# clients/online_update_close.ycp:67 clients/online_update_start.ycp:136 +#: src/include/smt/dialogs.rb:429 +#, fuzzy +#| msgid "Patch &Details <<" +msgid "Patch Details" +msgstr "&Yama ayrıntıları <<" + +#: src/include/smt/dialogs.rb:436 +#, fuzzy +#| msgid "&Toggle Status" +msgid "&Toggle Patch Status" +msgstr "&Durum aç/kapa" + +# clients/lan_inetd_custom.ycp:748 +#: src/include/smt/dialogs.rb:440 +#, fuzzy +#| msgid "&Status" +msgid "Change &Status" +msgstr "&Durum" + +# clients/inst_sw_single.ycp:656 +#: src/include/smt/dialogs.rb:442 +#, fuzzy +#| msgid "Items Excluded from Search:" +msgid "&Exclude from Snapshot..." +msgstr "Aramanın dışında tutulmuş kalemler:" + +#: src/include/smt/dialogs.rb:446 +msgid "&All listed..." +msgstr "" + +#: src/include/smt/dialogs.rb:448 +msgid "&Enable" +msgstr "&Etkinleştir" + +#: src/include/smt/dialogs.rb:449 +msgid "&Disable" +msgstr "&İptal et" + +# clients/lan_inetd_custom.ycp:762 +#: src/include/smt/dialogs.rb:456 +#, fuzzy +#| msgid "Create Hat" +msgid "Create Snapshot..." +msgstr "Başlık oluştur" + +#: src/include/smt/dialogs.rb:460 +msgid "From Full Mirror to &Testing" +msgstr "" + +#: src/include/smt/dialogs.rb:464 +#, fuzzy +#| msgid "&Show introduction" +msgid "From Testing to &Production" +msgstr "&Tanıtımı göster" + +#: src/include/smt/dialogs.rb:480 +msgid "Name" +msgstr "Ad" + +#: src/include/smt/dialogs.rb:481 +#, fuzzy +#| msgid "iSCSI Target" +msgid "Target" +msgstr "iSCSI hedefi" + +#: src/include/smt/dialogs.rb:482 +#, fuzzy +#| msgid "Monitoring" +msgid "Mirroring" +msgstr "İzleme" + +#. TRANSLATORS: tab-header +#: src/include/smt/dialogs.rb:483 src/include/smt/wizard.rb:186 +msgid "Staging" +msgstr "" + +# include/ui/common_messages.ycp:95 +#: src/include/smt/dialogs.rb:484 +#, fuzzy +#| msgid "Error" +msgid "Mirrored" +msgstr "Hata" + +# clients/inst_sw_details.ycp:140 clients/inst_sw_single.ycp:1074 clients/inst_sw_single.ycp:1460 clients/inst_sw_single.ycp:1461 clients/inst_sw_single.ycp:1484 clients/inst_sw_single.ycp:1485 include/slide_show.ycp:259 +#: src/include/smt/dialogs.rb:485 +msgid "Description" +msgstr "Tanım" + +#: src/include/smt/dialogs.rb:491 +msgid "Toggle &Mirroring" +msgstr "" + +#: src/include/smt/dialogs.rb:492 +#, fuzzy +#| msgid "&Toggle Status" +msgid "Toggle &Staging" +msgstr "&Durum aç/kapa" + +#: src/include/smt/dialogs.rb:494 +msgid "Mirror &Now" +msgstr "" + +# clients/lan_inetd_custom.ycp:748 +#: src/include/smt/dialogs.rb:506 +msgid "Status" +msgstr "Durum" + +#: src/include/smt/dialogs.rb:506 +msgid "Host Name" +msgstr "Makine adı" + +#: src/include/smt/dialogs.rb:506 +msgid "Last Contact" +msgstr "" + +#. TRANSLATORS: Dialog caption +#. TRANSLATORS: Dialog caption +#: src/include/smt/dialogs.rb:519 src/include/smt/dialogs.rb:948 +#, fuzzy +#| msgid "Initializing DSL Configuration" +msgid "Initializing SMT Configuration" +msgstr "DSL yapılandırması başlatılıyor" + +#. TRANSLATORS: Progress stage +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:524 src/include/smt/dialogs.rb:954 +#, fuzzy +#| msgid "Read the configuration" +msgid "Read SMT configuration" +msgstr "Yapılandırmayı oku" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:526 +#, fuzzy +#| msgid "Read the SCPM state" +msgid "Read SMT status" +msgstr "SCPM durumunu oku" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:528 +msgid "Read firewall settings" +msgstr "Firewall ayarlarını oku" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:530 +#, fuzzy +#| msgid "Read user settings" +msgid "Read cron settings" +msgstr "Kullanıcı ayarlarını oku" + +#. TRANSLATORS: Bussy message /progress/ +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:534 src/include/smt/dialogs.rb:958 +#, fuzzy +#| msgid "Reading the configuration..." +msgid "Reading SMT configuration..." +msgstr "Yapılandırma okunuyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:536 +#, fuzzy +#| msgid "Reading the SCPM state..." +msgid "Reading SMT status..." +msgstr "SCPM durumu okunuyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:538 +msgid "Reading firewall settings..." +msgstr "Firewall ayarları okunuyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:540 +#, fuzzy +#| msgid "Reading custom settings..." +msgid "Reading cron settings..." +msgstr "Özel ayarlar okunuyor..." + +#. Dialog caption +#: src/include/smt/dialogs.rb:586 +msgid "SCC Credentials" +msgstr "" + +#. Informative text +#: src/include/smt/dialogs.rb:591 +msgid "" +"System does not appear to be registered in SCC.\n" +"Choose one of the options below." +msgstr "" + +#. Radio button +#: src/include/smt/dialogs.rb:607 +#, fuzzy +#| msgid "&Skip detection" +msgid "&Skip Registration" +msgstr "&Algılamayı atla" + +#. Radio button +#: src/include/smt/dialogs.rb:616 +#, fuzzy +#| msgid "Customer Center" +msgid "Register in &SUSE Customer Center" +msgstr "Müşteri Merkezi" + +#. Help "SCC Credentials", #1 +#: src/include/smt/dialogs.rb:626 +msgid "" +"<p><b><big>SCC Credentials</big></b><br>\n" +"You need to register your SMT in SUSE Customer Center to get it working\n" +"properly. Choose one of the listed options.</p>" +msgstr "" + +#. Help "SCC Credentials", #2 +#: src/include/smt/dialogs.rb:632 +msgid "" +"<p>Choosing <b>Register in SUSE Customer Center</b> would\n" +"call regular SUSE Customer Center Configuration module,\n" +"<b>Generate New SCC Credentials</b> just creates new SCC Credentials\n" +"file without calling SUSE Customer Center Configuration module.</p>" +msgstr "" + +# include/ui/common_messages.ycp:91 +#. Pop-up dialog caption +#: src/include/smt/dialogs.rb:661 +msgid "Warning" +msgstr "Uyarı" + +#. Pop-up question +#: src/include/smt/dialogs.rb:663 +msgid "" +"Leaving the SCC credentials empty might cause SMT not to work properly.\n" +"Are you sure you want to really skip it?" +msgstr "" + +# clients/inst_sw_single.ycp:1623 +#. Button label +#: src/include/smt/dialogs.rb:667 +#, fuzzy +#| msgid "&Yes, Update" +msgid "&Yes, Skip It" +msgstr "&Evet, güncelle" + +# include/ui/common_messages.ycp:19 +#. Button label +#: src/include/smt/dialogs.rb:669 +msgid "&Cancel" +msgstr "&İptal et" + +#. Pop-up error message, %1 is replaced with file name, %2 with username +#: src/include/smt/dialogs.rb:742 +msgid "" +"SMT is unable to set %1 file permissions\n" +"to be readable by %2 user." +msgstr "" + +#. Pop-up error message, %1 is replaced with directory name, %2 with username +#: src/include/smt/dialogs.rb:759 +msgid "" +"SMT is unable to set %1 directory permission\n" +"to be recursively writable by %2 user." +msgstr "" + +#. 0 -> some lines found +#. 1 -> nothing found +#. 2 -> error +#: src/include/smt/dialogs.rb:813 +msgid "" +"File %1 has been found in your document root.\n" +"\n" +"Please, make sure, that '/repo/keys' is listed as an allowed directory\n" +"or remove the file. Otherwise SMT server might not work properly." +msgstr "" + +# clients/inst_mouse.ycp:123 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:829 +#, fuzzy +#| msgid "Mouse configuration" +msgid "Adjust SMT configuration" +msgstr "Fare yapılandırması" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:831 +#, fuzzy +#| msgid "Update configuration" +msgid "Adjust database configuration" +msgstr "Yapılandırmayı güncelle" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:833 +#, fuzzy +#| msgid "&Use Common Server Certificate" +msgid "Check and install server certificate" +msgstr "&Ortak sunucu sertifikası kullan" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:835 +#, fuzzy +#| msgid "DNS server configuration" +msgid "Adjust Web-server configuration" +msgstr "DNS sunucu yapılandırması" + +# clients/lan_inetd_start.ycp:127 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:837 +#, fuzzy +#| msgid "Adjust the DNS service" +msgid "Adjust SMT service" +msgstr "DNS hizmetini ayarla" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:839 +msgid "Write firewall settings" +msgstr "Firewall ayarlarını yaz" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:841 +#, fuzzy +#| msgid "Write user settings" +msgid "Write cron settings" +msgstr "Kullanıcı ayarlarını yaz" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:843 +#, fuzzy +#| msgid "Check for network devices" +msgid "Check mirrored repositories" +msgstr "Ağ aygıtlarını kontrol et" + +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:845 +#, fuzzy +#| msgid "Synchronization Time" +msgid "Run synchronization check" +msgstr "Senkronizasyon zamanı" + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:849 +#, fuzzy +#| msgid "Adapting configuration..." +msgid "Adjusting SMT configuration..." +msgstr "Yapılandırma uyarlanıyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:851 +#, fuzzy +#| msgid "Adapting configuration..." +msgid "Adjusting database configuration..." +msgstr "Yapılandırma uyarlanıyor..." + +# include/scanner/scanner_start.ycp:59 +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:853 +#, fuzzy +#| msgid "Checking already installed scanners..." +msgid "Checking and installing server certificate..." +msgstr "Önceden kurulu tarayıcılar kontrol ediliyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:855 +#, fuzzy +#| msgid "Writing NFS Server Configuration..." +msgid "Adjusting Web server configuration..." +msgstr "NFS sunucu yapılandırması yazılıyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:857 +#, fuzzy +#| msgid "Adjusting the DNS service..." +msgid "Adjusting SMT service..." +msgstr "DNS hizmetleri ayarlanıyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:859 +msgid "Writing firewall settings..." +msgstr "Firewall ayarları yazılıyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:861 +#, fuzzy +#| msgid "Writing openssh settings..." +msgid "Writing cron settings..." +msgstr "openssh ayarları yazılıyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:863 +#, fuzzy +#| msgid "Checking for network devices..." +msgid "Checking mirrored repositories..." +msgstr "Ağ aygıtları kontrol ediliyor..." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:865 +#, fuzzy +#| msgid "Running scripts..." +msgid "Running synchronization check..." +msgstr "Komut dosyaları çalıştırılıyor..." + +#. TRANSLATORS: Dialog caption +#: src/include/smt/dialogs.rb:871 +#, fuzzy +#| msgid "Writing NIS Configuration..." +msgid "Writing SMT Configuration" +msgstr "NIS yapılandırması yazılıyor..." + +#. TRANSLATORS: Dialog caption +#: src/include/smt/dialogs.rb:980 +#, fuzzy +#| msgid "&Write Changes Now" +msgid "Writing Changes" +msgstr "&Değişiklikleri şimdi yaz" + +# clients/inst_sw_single.ycp:1915 +#. TRANSLATORS: Progress stage +#: src/include/smt/dialogs.rb:985 +#, fuzzy +#| msgid "Got patches." +msgid "Write patches" +msgstr "Yamalar alındı." + +#. TRANSLATORS: Bussy message /progress/ +#: src/include/smt/dialogs.rb:989 +#, fuzzy +#| msgid "Writing schemes..." +msgid "Writing patches..." +msgstr "Şemalar kaydediliyor..." + +# include/partitioning/custom_part_dialogs.ycp:110 +#. TRANSLATORS: error report +#: src/include/smt/dialogs.rb:1142 src/modules/SMTData.rb:1123 +#, fuzzy +#| msgid "" +#| "The first and the second version\n" +#| "of the password do not match!\n" +#| "Please try again." +msgid "The first and the second password do not match." +msgstr "" +"Girdiğiniz birinci ve ikinci parolalar\n" +"birbirini tutmuyor!\n" +"Lütfen tekrar deneyin." + +#. TRANSLATORS: error report, actually containing a question +#: src/include/smt/dialogs.rb:1151 +msgid "" +"Password should not be empty.\n" +"\n" +"Would you like to continue nevertheless?" +msgstr "" + +#. Pop-up error message +#: src/include/smt/dialogs.rb:1174 +msgid "" +"The SMT URL must not be empty.\n" +"\n" +"Enter your SMT server URL in the following format: http:://server.name/\n" +msgstr "" + +#. BNC #518222: Check for 'http://.+' or 'https://.+' in URL +#: src/include/smt/dialogs.rb:1186 +msgid "" +"Invalid SMT Server URL.\n" +"\n" +"URL should start with 'http://' or 'https://'." +msgstr "" + +#. Pop-up error message +#: src/include/smt/dialogs.rb:1199 +#, fuzzy +#| msgid "The password must not be empty." +msgid "Update server user must not be empty." +msgstr "Parola kısmını boş bırakmayınız." + +#. Pop-up error message +#: src/include/smt/dialogs.rb:1207 +#, fuzzy +#| msgid "The password must not be empty." +msgid "Update server password must not be empty." +msgstr "Parola kısmını boş bırakmayınız." + +#. TRANSLATORS: LogView label +#: src/include/smt/dialogs.rb:1221 +#, fuzzy +#| msgid "&Details" +msgid "&Test Details" +msgstr "&Ayrıntılar" + +#. TRANSLATORS: LogView line +#: src/include/smt/dialogs.rb:1236 +#, fuzzy +#| msgid "Test Result:" +msgid "Test result: success" +msgstr "Test Sonucu:" + +#. TRANSLATORS: LogView line +#: src/include/smt/dialogs.rb:1243 +#, fuzzy +#| msgid "Test Result:" +msgid "Test result: failure" +msgstr "Test Sonucu:" + +# include/tv/ui.ycp:601 +#. busy message +#: src/include/smt/dialogs.rb:1396 +#, fuzzy +#| msgid "" +#| "Getting list\n" +#| "of available kernel modules..." +msgid "Getting list of the currently available repositories..." +msgstr "" +"Kullanılabilir çekirdek modüllerinin\n" +"listesi alınıyor..." + +#. empty /--/ == no specific target +#: src/include/smt/dialogs.rb:1478 src/include/smt/dialogs.rb:1479 +msgid "Unknown" +msgstr "Bilinmeyen" + +# include/ui/file_popups.ycp:96 include/ui/file_popups.ycp:127 include/ui/file_popups.ycp:138 include/ui/file_popups.ycp:180 +#. Part of a complex catalogs filter, ComboBox label +#. %1 is replaced with a filter level number (1 ... n) +#: src/include/smt/dialogs.rb:1521 +#, fuzzy +#| msgid "Filter: %1" +msgid "Filter &%1" +msgstr "Filtre: %1" + +#. More items to choose from, finish +#: src/include/smt/dialogs.rb:1541 +#, fuzzy +#| msgid "&Filter" +msgid "F&ilter" +msgstr "&Filtre" + +# clients/online_update_details.ycp:92 +#. Used as a fallback +#. %1 is replaced with a patch category +#: src/include/smt/dialogs.rb:1606 +#, fuzzy +#| msgid "&Show Patch Category:" +msgid "Patch category '%1'" +msgstr "&Yama kategorisini göster:" + +#. No patch listed, no patch selected +#: src/include/smt/dialogs.rb:1624 +#, fuzzy +#| msgid "There is no user interface available for this module." +msgid "There are no patches available in this repository." +msgstr "Bu modül için mevcut bir kullanıcı arabirimi yok." + +#. %1 is replaced with a warning that patch is filtered-out by a category filter +#. %2 is replaced with patch description +#: src/include/smt/dialogs.rb:1647 +msgid "" +"%1\n" +"\n" +"%2" +msgstr "" + +#. Connected with the text above, informs user about the current patch state +#. %1 is replaced with a translated patch type +#: src/include/smt/dialogs.rb:1651 +msgid "<b>Patch is filtered-out by patch-category filter (%1) and thus cannot be enabled in this dialog.</b>" +msgstr "" + +# clients/sound_options.ycp:183 +#: src/include/smt/dialogs.rb:1677 +#, fuzzy +#| msgid "There are no options for this module" +msgid "There are no repositories with staging enabled" +msgstr "Bu modül için seçenek yok." + +#: src/include/smt/dialogs.rb:1693 +msgid "Mirror timestamp: %1" +msgstr "" + +#: src/include/smt/dialogs.rb:1700 +msgid "Never mirrored" +msgstr "" + +#: src/include/smt/dialogs.rb:1707 +msgid "Testing snapshot timestamp: %1" +msgstr "" + +#: src/include/smt/dialogs.rb:1714 src/include/smt/dialogs.rb:1728 +msgid "Never created" +msgstr "" + +#: src/include/smt/dialogs.rb:1721 +#, fuzzy +#| msgid "Product Name: %1" +msgid "Production snapshot timestamp: %1" +msgstr "Ürün adı: %1" + +#. If filter is used, remove 'nil's +#: src/include/smt/dialogs.rb:1880 +msgid "Repository does not allow patch-filtering" +msgstr "" + +#. %1 Client (is|is not) up-to-date +#. %2 There are some patches pending... +#: src/include/smt/dialogs.rb:1921 +msgid "%1<br>%2" +msgstr "" + +# clients/inst_kernel.ycp:58 clients/inst_sw_update.ycp:599 +#: src/include/smt/dialogs.rb:1923 +#, fuzzy +#| msgid "The system is up to date" +msgid "Client is up-to-date" +msgstr "Sistem güncel." + +#: src/include/smt/dialogs.rb:1924 +msgid "<b>Client is not up-to-date</b>" +msgstr "" + +#. %1 is replaced with a comma-separated pieces of info, e.g., 'Security patches: 5' +#: src/include/smt/dialogs.rb:1928 +msgid "There are some patches pending:<br>%1" +msgstr "" + +#. Number of patches pending +#: src/include/smt/dialogs.rb:1937 +#, fuzzy +#| msgid "Source unknown." +msgid "Status is unknown" +msgstr "Kaynak bilinmiyor." + +#: src/include/smt/dialogs.rb:1947 +msgid "There are no registered clients or their status is unknown" +msgstr "" + +# clients/hwinfo.ycp:88 +#: src/include/smt/dialogs.rb:1975 +#, fuzzy +#| msgid "Unknown type" +msgid "Unknown Status" +msgstr "Bilinmeyen tür" + +#: src/include/smt/dialogs.rb:1978 +msgid "Never" +msgstr "Asla" + +#. Catalog Name (Target) +#: src/include/smt/dialogs.rb:2060 +#, fuzzy +#| msgid "%1 (%2)" +msgid "%1 (%2)(%3)" +msgstr "%1 (%2)" + +#: src/include/smt/dialogs.rb:2066 +msgid "%1 (%2)" +msgstr "%1 (%2)" + +#. a mlti-selection-box label +#: src/include/smt/dialogs.rb:2118 +msgid "Exclude All Patches of Selected Categories" +msgstr "" + +#. a pop-up message +#: src/include/smt/dialogs.rb:2194 +msgid "" +"This repository does not allow patch filtering.\n" +"You can create snapshots of its current stage though." +msgstr "" + +#. a pop-up message +#: src/include/smt/dialogs.rb:2215 +msgid "" +"This patch is filtered-out by a category-based filter\n" +"and thus its status cannot be changed in this dialog." +msgstr "" + +#. Inverting the status: "filtered" used as new "status" +#: src/include/smt/dialogs.rb:2233 +#, fuzzy +#| msgid "Unable to read the current configuration." +msgid "Unable to change the current patch status." +msgstr "Mevcut yapılandırma okunamıyor." + +#. Multiline key description +#: src/include/smt/dialogs.rb:2359 +msgid "" +"Key ID: %1\n" +"UID: %2\n" +"Fingerprint: %3" +msgstr "" + +#. pop-up heading +#: src/include/smt/dialogs.rb:2369 +#, fuzzy +#| msgid "&Passphrase" +msgid "Signing Key Passphrase" +msgstr "&Parola" + +#. pop-up dialog message +#. %1 is replaced with a (possibly multiline) key descrioption +#: src/include/smt/dialogs.rb:2375 +msgid "" +"SMT is configured to sign the snapshot with the following key:\n" +"\n" +"%1\n" +"\n" +"Enter the key passphrase and press OK,\n" +"otherwise press Cancel to skip the signing procedure." +msgstr "" + +#: src/include/smt/dialogs.rb:2392 +#, fuzzy +#| msgid "&Passphrase" +msgid "Key &Passphrase" +msgstr "&Parola" + +#: src/include/smt/dialogs.rb:2393 +msgid "&Once Again" +msgstr "" + +#. pop-up error message +#: src/include/smt/dialogs.rb:2420 +#, fuzzy +#| msgid "Entered addresses are not valid." +msgid "Entered passphrases are not identical." +msgstr "Girilmiş adresler geçersiz." + +#. a bussy message +#: src/include/smt/dialogs.rb:2460 +#, fuzzy +#| msgid "Creating partition plans..." +msgid "Creating repository snapshot..." +msgstr "Bölümlendirme planı oluşturuluyor..." + +#. a pop-up error message +#: src/include/smt/dialogs.rb:2475 +#, fuzzy +#| msgid "" +#| "An error occurred while creating the database\n" +#| "of printers." +msgid "An error has occurred while creating the snapshot." +msgstr "" +"Yazıcı veritabanı oluşturulurken\n" +"bir hata oluştu." + +#. very simple e-mail validator +#: src/include/smt/dialogs.rb:2554 +#, fuzzy +#| msgid "New value" +msgid "New &E-Mail" +msgstr "Yeni değer" + +#: src/include/smt/dialogs.rb:2554 +#, fuzzy +#| msgid "Editing HAT saving" +msgid "Editing &E-Mail" +msgstr "Düzenlenen başlık kaydediliyor" + +#. OK pressed +#: src/include/smt/dialogs.rb:2589 +#, fuzzy +#| msgid "' is not valid." +msgid "E-mail '%1' is not valid." +msgstr "' geçersiz." + +#. pop-up error message +#. pop-up error message +#. pop-up error message +#: src/include/smt/dialogs.rb:2634 src/include/smt/dialogs.rb:2647 +#: src/include/smt/dialogs.rb:2664 src/include/smt/dialogs.rb:2672 +#, fuzzy +#| msgid "Cannot read the current settings." +msgid "Internal Error: Cannot toggle the current state." +msgstr "Şu anki ayarlar okunamıyor." + +#. Error message +#: src/include/smt/dialogs.rb:2710 +msgid "Unable to mirror the selected repository." +msgstr "" + +#: src/include/smt/dialogs.rb:2716 +#, fuzzy +#| msgid "&Profile Repository:" +msgid "Mirroring Repository" +msgstr "&Profil deposu:" + +#: src/include/smt/dialogs.rb:2717 +#, fuzzy +#| msgid "Progress" +msgid "&Progress" +msgstr "İşlem" + +# include/ui/wizard_message.ycp:72 +# include/ui/common_messages.ycp:79 +#: src/include/smt/dialogs.rb:2718 +msgid "&Stop" +msgstr "D&ur" + +#: src/include/smt/dialogs.rb:2726 +msgid "Started mirroring the selected repository with process ID: %1\n" +msgstr "" + +#. a headline +#: src/include/smt/dialogs.rb:2752 +msgid "Aborting the Mirroring" +msgstr "" + +#. a pop-up question +#: src/include/smt/dialogs.rb:2754 +#, fuzzy +#| msgid "" +#| "Are you \n" +#| "sure you want to delete the profile " +msgid "Are you sure you want to abort the current mirroring process?" +msgstr "" +"Bu profili \n" +"silmek istediğinize emin misiniz" + +#. push button +#: src/include/smt/dialogs.rb:2756 +#, fuzzy +#| msgid "RAID &1 (Mirroring)" +msgid "Abort Mirroring" +msgstr "RAID &1 (Mirroring)" + +# clients/online_update.ycp:45 +#. push button +#: src/include/smt/dialogs.rb:2758 +#, fuzzy +#| msgid "Continue" +msgid "Continue Mirroring" +msgstr "Devam et" + +#: src/include/smt/dialogs.rb:2761 +#, fuzzy +#| msgid "Loading..." +msgid "Aborting...\n" +msgstr "Yükleniyor..." + +# clients/lan_inetd.ycp:54 clients/lan_inetd_custom.ycp:792 clients/lan_inetd_start.ycp:146 clients/lan_inetd_start.ycp:158 +#. BNC #519216: Purge cache right after mirroring +#: src/include/smt/dialogs.rb:2798 +#, fuzzy +#| msgid "Finished" +msgid "Finished\n" +msgstr "Sonlandı" + +# clients/support_registration.ycp:66 +#. BNC #520557: Manual or additional cron commands +#. BNC #520557: Handling unknown script +#: src/include/smt/dialogs.rb:2923 src/include/smt/dialogs.rb:3347 +#, fuzzy +#| msgid "Command: " +msgid "Command: %1" +msgstr "Komut: " + +#. Offer adding the script only if exists +#: src/include/smt/dialogs.rb:2953 +msgid "Uploading Support Configs" +msgstr "" + +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:2986 src/include/smt/dialogs.rb:3282 +msgid "Periodically" +msgstr "" + +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:2992 src/include/smt/dialogs.rb:3279 +msgid "Monthly" +msgstr "Her ay" + +#: src/include/smt/dialogs.rb:2996 src/include/smt/dialogs.rb:3007 +#: src/include/smt/dialogs.rb:3025 src/include/smt/dialogs.rb:3033 +#: src/include/smt/dialogs.rb:3042 src/include/smt/dialogs.rb:3050 +#, fuzzy +#| msgid "User-defined" +msgid "Undefined" +msgstr "Kullanıcı tanımlı" + +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:3001 src/include/smt/dialogs.rb:3278 +msgid "Weekly" +msgstr "Her hafta" + +# clients/hwinfo.ycp:51 +#. Script-call period, used as a table item +#: src/include/smt/dialogs.rb:3014 src/include/smt/dialogs.rb:3277 +msgid "Daily" +msgstr "Her gün" + +#: src/include/smt/dialogs.rb:3024 +#, fuzzy +#| msgid "1 hour" +msgid "Every %1 hours" +msgstr "1 saat" + +# include/cups/ui.ycp:342 +#: src/include/smt/dialogs.rb:3041 +#, fuzzy +#| msgid "10 minutes" +msgid "Every %1 minutes" +msgstr "10 dakika" + +#. TRANSLATORS: informational message (Report::Message) +#: src/include/smt/dialogs.rb:3092 +msgid "" +"Scheduled jobs have been disabled due to missing packages.\n" +"To install the missing packages and set up the scheduled jobs,\n" +"you need to restart the YaST SMT Configuration module." +msgstr "" + +#: src/include/smt/dialogs.rb:3119 +msgid "Every H-th &Hour" +msgstr "" + +#: src/include/smt/dialogs.rb:3120 +msgid "Every M-th &Minute" +msgstr "" + +#: src/include/smt/dialogs.rb:3122 src/include/smt/dialogs.rb:3303 +msgid "&Hour" +msgstr "&Saat" + +# clients/ui_widgets.ycp:196 clients/ui_widgets.ycp:224 +#: src/include/smt/dialogs.rb:3123 src/include/smt/dialogs.rb:3314 +msgid "&Minute" +msgstr "&Dakika" + +#. Weekly +#: src/include/smt/dialogs.rb:3265 +msgid "Editing a SMT Scheduled Job" +msgstr "" + +#: src/include/smt/dialogs.rb:3266 +msgid "Adding New SMT Scheduled Job" +msgstr "" + +# clients/hwinfo.ycp:97 +#: src/include/smt/dialogs.rb:3275 +msgid "&Frequency" +msgstr "&Frekans" + +#: src/include/smt/dialogs.rb:3289 +msgid "&Job to Run" +msgstr "" + +#: src/include/smt/dialogs.rb:3293 +#, fuzzy +#| msgid "Backup Start Time" +msgid "Job Start Time" +msgstr "Yedekleme başlama saati" + +#: src/include/smt/dialogs.rb:3300 +#, fuzzy +#| msgid "Day of &Week" +msgid "Day of the &Week" +msgstr "&Haftanın günü" + +#: src/include/smt/dialogs.rb:3309 +#, fuzzy +#| msgid "&Day of Month" +msgid "&Day of the Month" +msgstr "&Ayın günü" + +# include/ui/common_popups.ycp:279 +#. TRANSLATORS: yes-no popup +#: src/include/smt/dialogs.rb:3440 +msgid "" +"Really exit?\n" +"All changes will be lost." +msgstr "" +"Çıkacak mısınız?\n" +"Tüm değişiklikler kaybolacaktır." + +#. TRANSLATORS: help a1 +#: src/include/smt/helps.rb:17 +msgid "" +"<p><big><b>Customer Center Access</b></big><br>\n" +"Enter the credentials for SUSE Updates (updates.suse.com) here.</p>\n" +msgstr "" + +#. TRANSLATORS: help a2 +#: src/include/smt/helps.rb:21 +msgid "" +"<p><b>User</b> and <b>Password</b> are needed for Customer Center authentication.\n" +"To test the credentials you entered, click <b>Test</b>.\n" +"SMT then connects to the Customer Center server for authentication and download of\n" +"test data.</p>\n" +msgstr "" + +#. TRANSLATORS: help a3 +#: src/include/smt/helps.rb:28 +msgid "<p>E-mail should be the one you used to register to the customer center.</p>" +msgstr "" + +#. TRANSLATORS: help b1 +#: src/include/smt/helps.rb:33 +msgid "" +"<p><big><b>Database</b></big><br>\n" +"For security reasons, SMT requires a separate user to connect to the database.\n" +"With <b>Database Password</b>, set or change the database\n" +"password for that user. The password should not be empty.</p>\n" +msgstr "" + +#. TRANSLATORS: help c1 +#: src/include/smt/helps.rb:41 +msgid "" +"<p><big><b>Reporting</b></big><br>\n" +"Here you can set up a list of e-mail addresses that SMT will send reports to.</p>\n" +msgstr "" + +#. TRANSLATORS: help d1 +#: src/include/smt/helps.rb:46 +msgid "" +"<p><big><b>Schedule SMT Jobs</b></big><br>\n" +"Here you can edit periodical SMT jobs.</p>" +msgstr "" + +#. TRANSLATORS: help d2 +#: src/include/smt/helps.rb:50 +#, fuzzy +#| msgid "" +#| "<p>To add a network declaration,\n" +#| "select <b>Subnet</b>.</p>" +msgid "<p>When adding a new job, first select a <b>Job to Run</b>.</p>" +msgstr "" +"<p>Yeni bir ağ ifadesi eklemek için\n" +"<b>Subnet</b> seçeneğini kullanın.</p>" + +#. TRANSLATORS: help d3 +#: src/include/smt/helps.rb:52 +msgid "" +"<p>When editing a current job or adding new one, the <b>Frequency</b> selection box\n" +"switches dialog mode according to the currently selected value.\n" +"Some fields are enabled or disabled accordingly, e.g., <b>Day of the Week</b>\n" +"is disabled for <tt>Daily</tt> job frequency.</p>\n" +msgstr "" + +#. TRANSLATORS: help e1 +#: src/include/smt/helps.rb:60 +msgid "" +"<p><big><b>Repositories</b></big><br>\n" +"Here you can see all repositories available for mirroring.</p>" +msgstr "" + +#. TRANSLATORS: help e2 +#: src/include/smt/helps.rb:64 +#, fuzzy +#| msgid "" +#| "<p>To change the status of a module, \n" +#| "choose the appropriate entry of the table and click <b>Toggle Status</b>.</p>\n" +msgid "" +"<p>To set mirroring on or off, select a repository in the table\n" +"and click <b>Toggle Mirroring</b>.</p>" +msgstr "" +"<p>Bir modülün durumunu değiştirmek için\n" +"tablodan ilgili girdiyi seçip <b>Durum aç/kapa</b> düğmesine basın.</p>\n" + +#. TRANSLATORS: help e3 +#: src/include/smt/helps.rb:68 +msgid "" +"<p><b>Staging</b> offers you to create testing and production\n" +"snapshots. To enable or disable this feature, select a repository\n" +"in the table and click <b>Toggle Staging</b>.</p>" +msgstr "" + +#. TRANSLATORS: help f1 +#: src/include/smt/helps.rb:75 +msgid "" +"<p><big><b>Staging</b></big><br>\n" +"Here you can create testing and production snapshots from the mirrored\n" +"repositories that have <tt>staging</tt> enabled. Repositories that contain\n" +"patches allow patch-filtering, otherwise you can create full snapshots only\n" +"(without any fitler in use).</p>" +msgstr "" + +#. TRANSLATORS: help f2 +#: src/include/smt/helps.rb:83 +msgid "" +"<p>Choosing a <b>Repository Name</b> will switch the current\n" +"repository. Choosing a <b>Patch Category</b> applies a listing filter\n" +"on the current repository.</p>" +msgstr "" + +#. TRANSLATORS: help f3 +#: src/include/smt/helps.rb:89 +#, fuzzy +#| msgid "" +#| "<p>To change the status of a module, \n" +#| "choose the appropriate entry of the table and click <b>Toggle Status</b>.</p>\n" +msgid "" +"<p>To enable or disable <tt>patches</tt> in the snapshot,\n" +"select a patch in the table and click <b>Toggle Patch Status</b>.</p>" +msgstr "" +"<p>Bir modülün durumunu değiştirmek için\n" +"tablodan ilgili girdiyi seçip <b>Durum aç/kapa</b> düğmesine basın.</p>\n" + +#. TRANSLATORS: help f4, '->' is actually '->' in HTML +#: src/include/smt/helps.rb:93 +msgid "" +"<p>If you want to change more patches at once, you can also use\n" +"<b>Change Status->All Listed Patches...->Enable/Disable</b></p>" +msgstr "" + +#. TRANSLATORS: help f5, '->' is actually '->' in HTML +#: src/include/smt/helps.rb:97 +msgid "" +"<p>To exclude all patches of a selected type from the <tt>testing</tt>\n" +"snapshot, use <b>Change Status->Exclude from Snapshot...</b>.\n" +"Such patch cannot be enabled unless you remove the filter again.</p>" +msgstr "" + +#: src/include/smt/helps.rb:102 +msgid "" +"<p>To create <tt>testing</tt> or <tt>production</tt> snapshots\n" +"click <b>Create Snapshot...->From Full Mirror to Testing/From Testing to Production</b>.</p>" +msgstr "" + +#: src/include/smt/helps.rb:105 +msgid "" +"<p><b>Testing</b> snapshot is always created from the mirrored repository,\n" +"<b>production</b> is always created as a copy of the <b>testing</b> one.</p>" +msgstr "" + +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:159 +#, fuzzy +#| msgid "Customer Center" +msgid "Customer Center Access" +msgstr "Müşteri Merkezi" + +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:167 +msgid "Database and Reporting" +msgstr "" + +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:180 +#, fuzzy +#| msgid "Accessories" +msgid "Repositories" +msgstr "Donatılar" + +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:192 +#, fuzzy +#| msgid "Current Status: " +msgid "Clients Status" +msgstr "Şu anki durum: " + +#. TRANSLATORS: tab-header +#: src/include/smt/wizard.rb:198 +#, fuzzy +#| msgid "Schedule Reports" +msgid "Scheduled SMT Jobs" +msgstr "Raporları zamanla" + +# clients/sw_single.ycp:310 +#: src/include/smt/wizard.rb:215 src/include/smt/wizard.rb:241 +#, fuzzy +#| msgid "CASA Configuration Wizard Pages" +msgid "SMT Configuration Wizard - Step %1/%2" +msgstr "CASA yapılandırma sihirbazı sayfaları" + +#. TRANSLATORS: dialog caption +#: src/include/smt/wizard.rb:263 +#, fuzzy +#| msgid "Update System Configuration" +msgid "Update Server Configuration" +msgstr "Sistem Yapılandırmasını Güncelle" + +#. TRANSLATORS: dialog caption +#: src/include/smt/wizard.rb:280 +#, fuzzy +#| msgid "Management" +msgid "SMT Management" +msgstr "Yönetim" + +#. Pop-up error message, %1 is replaced with the SMT user name, +#. %2 with the SMT config file +#: src/modules/SMTData.rb:126 +#, fuzzy +#| msgid "" +#| "The device configured in the control file does not\n" +#| "exist on this system." +msgid "" +"SMT configuration is broken.\n" +"LOCAL->smtUser %1 defined in %2 does not exist on the system." +msgstr "" +"Bu kontrol dosyasında yapılandırılmış aygıt\n" +"bu sistemde mevcut değil." + +#. Something has been changed +#. Apache conf needs writing +#. and Apache service needs restarting +#: src/modules/SMTData.rb:666 +#, fuzzy +#| msgid "Sound card database not found. Please check your installation." +msgid "" +"Synchronization script %1 does not exist.\n" +"\n" +"Please, check your SMT installation." +msgstr "Ses kartı veri tabanı bulunamadı. Lütfen kurulumunuzu kontrol edin." + +#: src/modules/SMTData.rb:688 +#, fuzzy +#| msgid "Configuration script failed." +msgid "Running the synchronization script failed." +msgstr "Yapılandırma dosyası başarısız oldu." + +#: src/modules/SMTData.rb:692 +msgid "" +"<p><b><big>Details:</big></b></p>\n" +" <p><b>stdout:</b><br><pre>%1</pre></p>\n" +" <p><b>stderr:</b><br><pre>%2</pre></p>" +msgstr "" + +#. take care the the post script do not reschedule again +#: src/modules/SMTData.rb:832 +#, fuzzy +#| msgid "Cannot write settings." +msgid "Cannot write cron settings." +msgstr "Ayarlar yazılamıyor." + +# clients/cups.ycp:158 +#. TRANSLATORS: error message, %1 is replaced with a service-name +#: src/modules/SMTData.rb:848 +#, fuzzy +#| msgid "Reloading service %1..." +msgid "Reloading service %1 has failed." +msgstr "%1 hizmeti yeniden yükleniyor..." + +#. TRANSLATORS: Pop-up question headline +#: src/modules/SMTData.rb:866 +#, fuzzy +#| msgid "&Server Certificate" +msgid "Missing Server Certificate" +msgstr "&Sunucu sertifikası" + +#. TRANSLATORS: Pop-up question, %1 is replaced with a file name +#: src/modules/SMTData.rb:869 +msgid "" +"Server certificate %1 does not exist.\n" +"Would you like to run CA management to create one?\n" +"\n" +"The server certificate is vitally important for the update server to support SSL.\n" +msgstr "" + +#: src/modules/SMTData.rb:877 +#, fuzzy +#| msgid "Power management" +msgid "&Run CA management" +msgstr "Güç yönetimi" + +# include/package_utils.ycp:558 include/package_utils.ycp:638 include/package_utils.ycp:646 +#: src/modules/SMTData.rb:878 src/modules/SMTData.rb:1014 +#: src/modules/SMTData.rb:1045 src/modules/SMTData.rb:1057 +msgid "&Skip" +msgstr "&Atla" + +#. Package is not installed and couldn't be installed +#: src/modules/SMTData.rb:923 +#, fuzzy +#| msgid "Cannot delete the service. It is not installed." +msgid "Cannot run CA management because package %1 is not installed." +msgstr "Hizmet kurulu değil, bu yüzden silinemiyor." + +#. Server certificate exists +#: src/modules/SMTData.rb:967 +#, fuzzy +#| msgid "No root password configured" +msgid "Database root Password Required" +msgstr "root şifresi belirlenmemiş" + +# +#: src/modules/SMTData.rb:975 +#, fuzzy +#| msgid "Reenter the &Password" +msgid "Enter the MariaDB root &Password" +msgstr "Parolayı tekrar &girin" + +#. 2 : Cannot read the SMT configuration file +#: src/modules/SMTData.rb:1006 +#, fuzzy +#| msgid "Unable to write %1" +msgid "Unable to read %1" +msgstr "%1 dosyasına yazılamıyor." + +#: src/modules/SMTData.rb:1007 +msgid "" +"SMT was not able to read the configuration file.\n" +"Please, check the file and click Retry.\n" +"\n" +"To skip this, click Skip.\n" +msgstr "" + +# include/ui/common_messages.ycp:59 +#: src/modules/SMTData.rb:1013 src/modules/SMTData.rb:1044 +#: src/modules/SMTData.rb:1056 +msgid "&Retry" +msgstr "Yeniden &dene" + +#. 4 : Cannot connect to database (wrong mysql root password?) +#: src/modules/SMTData.rb:1021 +msgid "" +"SMT was not able to connect to the database.\n" +"The root password was probably wrong.\n" +msgstr "" + +# +# clients/cups.ycp:147 +#. 7 : Cannot create Database smt +#: src/modules/SMTData.rb:1040 +#, fuzzy +#| msgid "Cannot read the database1." +msgid "Cannot create database" +msgstr "Veritabanı okunamıyor." + +#: src/modules/SMTData.rb:1041 +msgid "" +"SMT was not able to create the database.\n" +"Click Retry to try again.\n" +msgstr "" + +#. 21: Database migration failed +#: src/modules/SMTData.rb:1052 +#, fuzzy +#| msgid "Boot loader configuration failed." +msgid "Database migration failed" +msgstr "Açılış yükleyicisi yapılandırması başarısız oldu." + +#: src/modules/SMTData.rb:1053 +msgid "" +"SMT has failed to migrate the database.\n" +"Click Retry to try again.\n" +msgstr "" + +#: src/modules/SMTData.rb:1073 +msgid "Adjusting New Database root Password" +msgstr "" + +#: src/modules/SMTData.rb:1079 +msgid "" +"The current MariaDB root password is empty.\n" +"\n" +" For security reasons, please, set a new one." +msgstr "" + +#: src/modules/SMTData.rb:1086 +#, fuzzy +#| msgid "Root Password" +msgid "New MariaDB root &Password" +msgstr "Root Şifresi" + +#: src/modules/SMTData.rb:1087 +#, fuzzy +#| msgid "No Password Expiration" +msgid "New Password &Again" +msgstr "Parola eskime kapalı" + +# +#: src/modules/SMTData.rb:1119 +#, fuzzy +#| msgid "Set the password." +msgid "Set up a new password, please." +msgstr "Parolayı belirtin." + +#. rw only for owner +#: src/modules/SMTData.rb:1182 +msgid "Setting up new MariaDB root password failed." +msgstr "" + +#. root password has been already set +#: src/modules/SMTData.rb:1244 +#, fuzzy +#| msgid "Unable to read the tuner database." +msgid "SMT needs to set up the database." +msgstr "Alıcı veri tabanı okunamıyor!" + +#. rw only for owner +#: src/modules/SMTData.rb:1385 +#, fuzzy +#| msgid "Cannot create UML user %1." +msgid "Cannot change SMT user password." +msgstr "UML kullanıcısı %1 oluşturulamadı." Added: branches/plus-SLE12-SP2/yast/tr/po/xpram.tr.po =================================================================== --- branches/plus-SLE12-SP2/yast/tr/po/xpram.tr.po (rev 0) +++ branches/plus-SLE12-SP2/yast/tr/po/xpram.tr.po 2016-07-04 08:45:41 UTC (rev 95982) @@ -0,0 +1,157 @@ +# Turkish message file for YaST2 (@memory@). +# Copyright (C) 2005 SUSE Linux Products GmbH. +# Copyright (C) 2002 SuSE Linux AG. +# Copyright (C) 1999, 2000, 2001 SuSE GmbH. +# Görkem Çetin <gorkem@gelecek.com.tr>, 1999, 2000. +# Mehmet Mıdık <mmidik@setra.net.tr>, 2000. +# Metin Oral <moral@suse.de>, 2001. +# +msgid "" +msgstr "" +"Project-Id-Version: YaST (@memory@)\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2016-05-06 16:59+0200\n" +"PO-Revision-Date: 2001-10-18 10:13+0200\n" +"Last-Translator: Görkem Çetin <gorkem@gelecek.com.tr>\n" +"Language-Team: turkish <i18n@suse.de>\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=1; plural=0;\n" + +#. Command line help text for the Xxpram module +#: src/clients/xpram.rb:51 +msgid "Configuration of XPRAM" +msgstr "XPRAM yapılandırması" + +#. command line help text for 'enable' action +#: src/clients/xpram.rb:61 +msgid "Enable XPRAM" +msgstr "XPRAM'i aç" + +#. command line help text for 'disable' action +#: src/clients/xpram.rb:68 +msgid "Disable XPRAM" +msgstr "XPRAM'i kapat" + +#. command line help text for 'configure' action +#: src/clients/xpram.rb:78 +msgid "Change the XPRAM configuration" +msgstr "XPRAM yapılandırmasını değiştir" + +# include/nfs/ui.ycp:228 +#. command line help text for the 'mountpoint' option +#: src/clients/xpram.rb:86 +msgid "Mount point" +msgstr "Bağlama noktası" + +#. For translators: Caption of the dialog +#: src/include/s390/xpram/ui.rb:48 +msgid "XPRAM Configuration" +msgstr "XPRAM yapılandırması" + +#. help text for XPRAM 1/4 +#: src/include/s390/xpram/ui.rb:51 +msgid "<p>Here, configure the <b>XPRAM</b> for your computer.</p>" +msgstr "<p>Buradan bilgisayarınızın XPRAM ayarlarını yapabilirsiniz.</p>" + +#. help text for XPRAM 2/4 +#: src/include/s390/xpram/ui.rb:53 +msgid "<p>This tool currently only supports assigning the entire XPRAM to one partition. To have multiple partitions, look at \"Device Drivers, Features and Commands November 30, 2004\" for the Linux kernel 2.6 - April 2004 stream.</p><p>In this case disable XPRAM in this module.</p>" +msgstr "<p>Bu gereç şimdilik sadece tüm XPRAM'i bir disk bölümüne atamayı desteklemektedir. Birden fazla disk bölümü için \"Device Drivers, Features and Commands November 30, 2004\" for the Linux kernel 2.6 - April 2004 stream dökümanına bakın.</p><p>Bu gibi bir durumda bu modül için XPRAM'i kapayın.</p>" + +# clients/inst_sunfb.ycp:242 +#. help text for XPRAM 3/4 +#: src/include/s390/xpram/ui.rb:57 +msgid "<p>Choose the correct mount point for <b>Mount Point</b>.</p>" +msgstr "<p><b>Bağlama noktası</b> girdisinde doğru baxlama noktasını seçin.</p>" + +# clients/inst_mouse.ycp:97 +#. help text for XPRAM 4/4 +#: src/include/s390/xpram/ui.rb:59 +msgid "<p>Next, choose the file system to use on the device.</p>" +msgstr "<p>Daha sonra, aygıtta kullanılacak dosya sistemini seçin.</p>" + +#. radio button label for to not start xpram +#: src/include/s390/xpram/ui.rb:83 +msgid "Do No&t Start XPRAM" +msgstr "XPRAM'i başlat&ma" + +#. radio button label for to start xpram +#: src/include/s390/xpram/ui.rb:92 +msgid "&Start XPRAM" +msgstr "XPRAM'i &başlat" + +#: src/include/s390/xpram/ui.rb:104 +msgid "Install File System or Swap Although &XPRAM Contains Valid Data" +msgstr "&XPRAM geçerli veri içermesine rağmen dosya sistemi ya da swap kur" + +# include/partitioning/custom_part_dialogs.ycp:454 include/partitioning/lvm_ui_dialogs.ycp:153 +#. frame label +#: src/include/s390/xpram/ui.rb:113 +msgid "Mount Point" +msgstr "Bağlanma Noktası" + +# +#. combobox label +#: src/include/s390/xpram/ui.rb:122 +msgid "&Mount Point" +msgstr "&Bağlama noktası:" + +# include/partitioning/custom_part_dialogs.ycp:288 +#. frame label +#: src/include/s390/xpram/ui.rb:137 +msgid "File System Type" +msgstr "Dosya sistemi türü" + +# include/partitioning/custom_part_dialogs.ycp:178 +#. combobox label +#: src/include/s390/xpram/ui.rb:146 +msgid "F&ile System to Use:" +msgstr "Kullanılacak &dosya sistemi:" + +#. Xpram read dialog caption +#: src/modules/Xpram.rb:99 +msgid "Saving XPRAM Configuration" +msgstr "XPRAM yapılandırması kaydediliyor" + +#. Progress stage 1/2 +#: src/modules/Xpram.rb:109 +msgid "Write the settings" +msgstr "Ayarları yaz" + +#. Progress stage 2/2 +#: src/modules/Xpram.rb:111 +msgid "Restart the service" +msgstr "Hizmeti yeniden başlat" + +#. Progress step 1/2 +#: src/modules/Xpram.rb:115 +msgid "Writing the settings..." +msgstr "Ayarlar yazılıyor..." + +#. Progress step 2/2 +#: src/modules/Xpram.rb:117 +msgid "Restarting service..." +msgstr "Hizmet yeniden başlatılıyor..." + +# clients/lan_inetd.ycp:54 clients/lan_inetd_custom.ycp:792 clients/lan_inetd_start.ycp:146 clients/lan_inetd_start.ycp:158 +#. Progress finished +#: src/modules/Xpram.rb:119 +msgid "Finished" +msgstr "Sonlandı" + +#: src/modules/Xpram.rb:136 +#, fuzzy +#| msgid "Error stopping xpram. Please try manual \"rcxpram stop\"" +msgid "Error stopping xpram. Try \"rcxpram stop\" manually." +msgstr "xpram durdurulamadı. Elle \"rcxpram stop\" komutunu kullanmayı deneyin." + +#. map out = (map) SCR::Execute(.target.bash_output,"bash -x /etc/init.d/xpram start", $["TERM":"raw"]); +#. y2milestone("got %1", out); +#: src/modules/Xpram.rb:154 +#, fuzzy +#| msgid "Error starting xpram. Please try manual \"rcxpram start\"" +msgid "Error starting xpram. Try \"rcxpram start\" manually." +msgstr "xpram başlatılamadı. Elle \"rcxpram start\" komutunu kullanmayı deneyin."