Author: minton
Date: 2015-11-06 03:38:48 +0100 (Fri, 06 Nov 2015)
New Revision: 94427
Modified:
trunk/packages/cs/po/factory9.cs.po
Log:
Merged factory9.pot for cs
Modified: trunk/packages/cs/po/factory9.cs.po
===================================================================
--- trunk/packages/cs/po/factory9.cs.po 2015-11-06 02:37:43 UTC (rev 94426)
+++ trunk/packages/cs/po/factory9.cs.po 2015-11-06 02:38:48 UTC (rev 94427)
@@ -4,7 +4,7 @@
msgid ""
msgstr ""
"Project-Id-Version: openSUSE-packages\n"
-"POT-Creation-Date: 2014-07-19 02:18:58\n"
+"POT-Creation-Date: 2015-11-06 04:10:51\n"
"PO-Revision-Date: 2015-02-25 12:21+0000\n"
"Last-Translator: Александр Мелентьев \n"
"Language-Team: Czech (http://www.transifex.com/minton/openSUSE-packages/language/cs/)\n"
@@ -13,29061 +13,41477 @@
"Content-Transfer-Encoding: 8-bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
-#. description(texlive-memdesign)
-msgid ""
-"\"A Few Notes on Book Design\" provides an introduction to the business of book design. It is an extended version of what used to be the first part of the memoir users' manual. Please note that the compiled copy, supplied in the package, uses commercial fonts; the README file contains instructions on how to compile the document without these fonts.\n"
-"\n"
-"date: 2013-04-26 23:17:44 +0000"
+#. summary(WALinuxAgent)
+msgid "The Microsoft Azure Linux Agent"
msgstr ""
-#. summary(texlive-ntgclass)
-msgid "\"European\" versions of standard classes"
+#. description(WALinuxAgent)
+msgid "The Microsoft Azure Linux Agent supports the provisioning and running of Linux VMs in the Microsoft Azure cloud. This package should be installed on Linux disk images that are built to run in the Microsoft Azure environment."
msgstr ""
-#. summary(texlive-xltxtra)
-msgid "\"Extras\" for LaTeX users of XeTeX"
+#. summary(t-prot)
+msgid "A Display Filter for RFC822 Messages"
msgstr ""
-#. description(texlive-latex4wp)
+#. description(t-prot)
msgid ""
-"\"LaTeX for Word Processor Users\" is a guide that helps converting knowledge and techniques of word processing into the LaTeX typesetting environment. It aims at helping WP users use LaTeX instead.\n"
+"t-prot detects and, when demanded, hides annoying parts in rfc822 messages: TOFU (see below), huge quoted blocks, signatures (especially when they are too long), excessive punctuation, blocks of empty lines, and trailing spaces and tabs. For use inside of MTAs or MDAs, it may exit with appropriate libc exit codes, so annoying messages may be bounced easily.\n"
"\n"
-"date: 2010-09-15 15:37:36 +0000"
+"TOFU is an abbreviation that mixes German and English words. It expands to \"text oben, full-quote unten\" that means \"text above - full quote below\" and describes the style of many users who let their mailer or newsreader quote everything of the previous message and just add some text at the top."
msgstr ""
-#. summary(texlive-pmgraph)
-msgid "\"Poor man's\" graphics"
+#. summary(texlive-specs-a:texlive-ESIEEcv)
+msgid "Curriculum vitae for French use"
msgstr ""
-#. summary(texlive-tabto-generic)
-msgid "\"Tab\" to a measured position in the line"
+#. description(texlive-specs-a:texlive-ESIEEcv)
+msgid ""
+"The package allows the user to set up a curriculum vitae as a French employer will expect.\n"
+"\n"
+"date: 2012-02-27 21:13:39 +0000"
msgstr ""
-#. description(texlive-intro-scientific)
+#. summary(texlive-specs-a:texlive-ESIEEcv-doc)
+#, fuzzy
+msgid "Documentation for texlive-ESIEEcv"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-a:texlive-ESIEEcv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ESIEEcv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-a:texlive-FAQ-en)
+msgid "A compilation of Frequently Asked Questions with answers"
+msgstr ""
+
+#. description(texlive-specs-a:texlive-FAQ-en)
msgid ""
-"\"Writing Scientific Documents Using LaTeX\" is an article introducing the use of LaTeX in typesetting scientific documents. It covers the basics of creating a new LaTeX document, special typesetting considerations, mathematical typesetting and graphics. It also touches on bibliographic data and BibTeX.\n"
+"The FAQ that has in the past been published in the UK TeX Users Group journal Baskerville (though updated more frequently on CTAN). It is also available (and searchable) via on the web.\n"
"\n"
-"date: 2009-02-22 09:18:48 +0000"
+"date: 2013-06-07 14:28:15 +0000"
msgstr ""
-#. description(texlive-romanbar)
+#. summary(texlive-specs-a:texlive-GS1)
+msgid "Typeset EAN barcodes using TeX rules, only"
+msgstr ""
+
+#. description(texlive-specs-a:texlive-GS1)
msgid ""
-"'Bars', in the present context, are lines above and below text that abut with the text. Barred roman numerals are sometimes found in publications. The package provides a function that prints barred roman numerals (converting arabic numerals if necessary). The package also provides a predicate \\ifnumeric.\n"
+"The (LaTeX 3) package typesets EAN-8 and EAN-13 barcodes, using the facilities of the rule-D package.\n"
"\n"
-"date: 2012-01-02 19:05:40 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-plipsum)
-msgid "'Lorem ipsum' for Plain TeX developers"
-msgstr ""
+#. summary(texlive-specs-a:texlive-GS1-doc)
+#, fuzzy
+msgid "Documentation for texlive-GS1"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-skrapport)
-msgid "'Simple' class for reports, etcetera"
+#. description(texlive-specs-a:texlive-GS1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-GS1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-a:texlive-HA-prosper)
+msgid "Patches and improvements for prosper"
msgstr ""
-#. description(texlive-ionumbers)
+#. description(texlive-specs-a:texlive-HA-prosper)
msgid ""
-"'ionumbers' stands for 'input/output numbers'. The package restyles numbers in maths mode. If a number in the input file is written, e.g., as $3,231.44$ as commonly used in English texts, the package is able to restyle it to be output as $3\\,231{,}44$ as commonly used in German texts (and vice versa). This may be useful, for example, if you have a large table and want to include it in texts with different output conventions without the need to change the table. The package can also automatically group digits left of the decimal separator (thousands) and right of the decimal separator (thousandths) in triplets without the need of specifing commas (English) or points (German) as separators. E.g., the input $1234.567890$ can be output as $1\\,234.\\,567\\,890$. Finally, an e starts the exponent of the number. For example, $21e6$ may be output as $26\\times10\\,^{6}$.\n"
+"HA-prosper is a patch for prosper that adds new functionality to prosper based presentations. Among the new features you will find automatic generation of a table of contents on each slide, support for notes and portrait slides. The available styles demonstrate how to expand the functionality of prosper even further.\n"
"\n"
-"date: 2011-06-15 07:16:20 +0000"
+"date: 2012-02-22 23:03:38 +0000"
msgstr ""
-#. summary(tkdiff)
-msgid "2 and 3-way diff/merge tool"
-msgstr ""
+#. summary(texlive-specs-a:texlive-HA-prosper-doc)
+#, fuzzy
+msgid "Documentation for texlive-HA-prosper"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mp3d)
-msgid "3D animations"
-msgstr ""
+#. description(texlive-specs-a:texlive-HA-prosper-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-HA-prosper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-light3d)
-msgid "3D lighting effects for pstricks"
+#. summary(texlive-specs-a:texlive-IEEEconf)
+msgid "Macros for IEEE conference proceedings"
msgstr ""
-#. summary(texlive-titleref)
-msgid "A \"\\titleref\" command to cross-reference section titles"
+#. description(texlive-specs-a:texlive-IEEEconf)
+msgid ""
+"The IEEEconf class implements the formatting dictated by the IEEE Computer Society Press for conference proceedings.\n"
+"\n"
+"date: 2012-07-16 16:45:50 +0000"
msgstr ""
-#. summary(texlive-linegoal)
-msgid "A \"dimen\" that returns the space left on the line"
-msgstr ""
+#. summary(texlive-specs-a:texlive-IEEEconf-doc)
+#, fuzzy
+msgid "Documentation for texlive-IEEEconf"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nkarta)
-msgid "A \"new\" version of the karta cartographic fonts"
-msgstr ""
+#. description(texlive-specs-a:texlive-IEEEconf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-IEEEconf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-relenc)
-msgid "A \"relaxed\" font encoding"
+#. summary(texlive-specs-a:texlive-IEEEtran)
+msgid "Document class for IEEE Transactions journals and conferences"
msgstr ""
-#. summary(texlive-ptext)
-msgid "A 'lipsum' for Persian"
+#. description(texlive-specs-a:texlive-IEEEtran)
+msgid ""
+"The class and its BibTeX style enable authors to produce officially-correct output for the Institute of Electrical and Electronics Engineers (IEEE) transactions, journals and conferences.\n"
+"\n"
+"date: 2013-01-02 10:09:21 +0000"
msgstr ""
-#. summary(texlive-lshort-english)
-msgid "A (Not So) Short Introduction to LaTeX2e"
-msgstr ""
+#. summary(texlive-specs-a:texlive-IEEEtran-doc)
+#, fuzzy
+msgid "Documentation for texlive-IEEEtran"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ted)
-msgid "A (primitive) token list editor"
+#. description(texlive-specs-a:texlive-IEEEtran-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-IEEEtran"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-a:texlive-MemoirChapStyles)
+msgid "Chapter styles in memoir class"
msgstr ""
-#. description(texlive-inlinebib)
+#. description(texlive-specs-a:texlive-MemoirChapStyles)
msgid ""
-"A BibTeX style and a LaTeX package that allow for a full bibliography at the end of the document as well as citation details in footnotes. The footnote details include \"op. cit.\" and \"ibid.\" contractions.\n"
+"A showcase of chapter styles available to users of memoir: the six provided in the class itself, plus many from elsewhere (by the present author and others). The package's resources apply only to memoir, but the package draws from a number of sources relating to standard classes, including the fncychap package, and Vincent Zoonekynd's tutorial on headings.\n"
"\n"
-"date: 2006-12-11 23:29:31 +0000"
+"date: 2012-04-11 14:14:01 +0000"
msgstr ""
-#. description(texlive-iopart-num)
+#. summary(texlive-specs-a:texlive-SIstyle)
+msgid "Package to typeset SI units, numbers and angles"
+msgstr ""
+
+#. description(texlive-specs-a:texlive-SIstyle)
msgid ""
-"A BibTeX style providing numeric citation in Harvard-like format. Intended for use with Institute of Physics (IOP) journals, including Journal of Physics.\n"
+"This package typesets SI units, numbers and angles according to the ISO requirements. Care is taken with font setup and requirements, and language customisation is available. Note that this package is (in principle) superseded by siunitx; sistyle has maintenance-only support, now.\n"
"\n"
-"date: 2009-01-27 14:17:42 +0000"
+"date: 2012-07-20 18:33:55 +0000"
msgstr ""
-#. summary(words:words-british)
-msgid "A British words dictionary"
-msgstr "Slovník britských slov"
+#. summary(texlive-specs-a:texlive-SIstyle-doc)
+#, fuzzy
+msgid "Documentation for texlive-SIstyle"
+msgstr "Dokumentace pro adaptx"
-#. summary(webdot)
-msgid "A CGI graph server script that uses tcldot from graphviz"
-msgstr ""
+#. description(texlive-specs-a:texlive-SIstyle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-SIstyle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(words:words-canadian)
-msgid "A Canadian words dictionary"
-msgstr "Slovník kanadských slov"
-
-#. summary(texlive-xdvi)
+#. summary(texlive-specs-a:texlive-SIunits)
#, fuzzy
-#| msgid "A PDF File Viewer for the X Window System"
-msgid "A DVI previewer for the X Window System"
-msgstr "Prohlížeč PDF souborů pro X11"
+#| msgid "International Components for Unicode"
+msgid "International System of Units"
+msgstr "Mezinárodní komponenty pro Unicode"
-#. summary(t-prot)
-msgid "A Display Filter for RFC822 Messages"
-msgstr ""
-
-#. description(texlive-translation-array-fr)
+#. description(texlive-specs-a:texlive-SIunits)
msgid ""
-"A French translation of the documentation of array.\n"
+"Typeset physical units following the rules of the International System of Units (SI). The package requires amstext, for proper representation of some values. Note that the package is now superseded by siunitx; siunits has maintenance-only support, now.\n"
"\n"
-"date: 2011-10-20 15:00:28 +0000"
+"date: 2011-10-15 07:25:56 +0000"
msgstr ""
-#. description(texlive-translation-dcolumn-fr)
-msgid ""
-"A French translation of the documentation of dcolumn.\n"
-"\n"
-"date: 2011-10-20 15:00:28 +0000"
+#. summary(texlive-specs-a:texlive-SIunits-doc)
+#, fuzzy
+msgid "Documentation for texlive-SIunits"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-a:texlive-SIunits-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-SIunits"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-a:texlive-Tabbing)
+msgid "Tabbing with accented letters"
msgstr ""
-#. description(texlive-translation-natbib-fr)
+#. description(texlive-specs-a:texlive-Tabbing)
msgid ""
-"A French translation of the documentation of natbib.\n"
+"By default, some of the tabbing environment's commands clash with default accent commands; LaTeX provides the odd commands \\a', etc., to deal with the clash. The package offers a variant of the tabbing environment which does not create this difficulty, so that users need not learn two sets of accent commands.\n"
"\n"
-"date: 2012-01-14 09:04:15 +0000"
+"date: 2013-10-03 12:20:59 +0000"
msgstr ""
-#. description(texlive-translation-biblatex-de)
+#. summary(texlive-specs-a:texlive-Tabbing-doc)
+#, fuzzy
+msgid "Documentation for texlive-Tabbing"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-a:texlive-Tabbing-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-Tabbing"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-a:texlive-Type1fonts)
+#, fuzzy
+msgid "Font installation guide"
+msgstr "SLES instalační příručka."
+
+#. description(texlive-specs-a:texlive-Type1fonts)
msgid ""
-"A German translation of the documentation of biblatex.\n"
+"This guide discusses the most common scenarios you are likely to encounter when installing Type 1 PostScript fonts. While the individual tools employed in the installation process are documented well, the actual difficulty most users are facing when trying to install new fonts is understanding how to put all the pieces together. This is what this guide is about.\n"
"\n"
-"date: 2011-10-24 14:26:34 +0000"
+"date: 2012-07-06 21:09:35 +0000"
msgstr ""
-#. summary(tinyca2)
-msgid "A Graphical Tool for Managing a Certification Authority"
+#. summary(texlive-specs-f:texlive-de-macro)
+msgid "Expand private macros in a document"
msgstr ""
-#. summary(texlive-lfb)
-msgid "A Greek font with normal and bold variants"
-msgstr ""
-
-#. description(ws-jaxme)
+#. description(texlive-specs-f:texlive-de-macro)
msgid ""
-"A Java/XML binding compiler takes as input a schema description (in most cases an XML schema, but it may be a DTD, a RelaxNG schema, a Java class inspected via reflection, or a database schema). The output is a set of Java classes: * A Java bean class matching the schema description. (If the schema was obtained via Java reflection, the original Java bean class.)\n"
+"De-macro is a Python script that helps authors who like to use private LaTeX macros (for example, as abbreviations). A technical editor or a cooperating author may balk at such a manuscript; you can avoid manuscript rejection misery by running de-macro on it. De-macro will expand macros defined in \\(re)newcommand or \\(re)newenvironment commands, within the document, or in the document's \"private\" package file.\n"
"\n"
-"* Read a conforming XML document and convert it into the equivalent Java bean.\n"
-"\n"
-"* Vice versa, marshal the Java bean back into the original XML document."
+"date: 2012-06-19 14:44:25 +0000"
msgstr ""
-#. summary(texlive-latexcheat)
-msgid "A LaTeX cheat sheet"
-msgstr ""
+#. summary(texlive-specs-f:texlive-de-macro-doc)
+#, fuzzy
+msgid "Documentation for texlive-de-macro"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-latexcheat-ptbr)
+#. description(texlive-specs-f:texlive-de-macro-doc)
#, fuzzy
-#| msgid "YaST2 - Translations for Brazilian Portuguese."
-msgid "A LaTeX cheat sheet, in Brazilian Portuguese"
-msgstr "YaST2 - Překlady do brazilské portugalštiny."
+msgid "This package includes the documentation for texlive-de-macro"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latexcheat-esmx)
-msgid "A LaTeX cheat sheet, in Spanish"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dehyph-exptl-doc)
+#, fuzzy
+msgid "Documentation for texlive-dehyph-exptl"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-talk)
+#. description(texlive-specs-f:texlive-dehyph-exptl-doc)
#, fuzzy
-msgid "A LaTeX class for presentations"
-msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
+msgid "This package includes the documentation for texlive-dehyph-exptl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-stage)
-msgid "A LaTeX class for stage plays"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dejavu)
+#, fuzzy
+msgid "LaTeX support for the DejaVu fonts"
+msgstr "XML podpora pro castor"
-#. summary(texlive-isodoc)
-msgid "A LaTeX class for the preparation of letters and invoices"
+#. description(texlive-specs-f:texlive-dejavu)
+msgid ""
+"The package contains LaTeX support for the DejaVu fonts, which are derived from the Vera fonts but contain more characters and styles. The fonts are included in the original TrueType format, and in converted Type 1 format. The (currently) supported encodings are: OT1, T1, IL2, TS1, T2*, X2, QX, and LGR. The package doesn't (currently) support mathematics. More encodings and/or features are expected.\n"
+"\n"
+"date: 2013-09-26 19:03:19 +0000"
msgstr ""
-#. summary(texlive-sides)
-msgid "A LaTeX class for typesetting stage plays"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dejavu-doc)
+#, fuzzy
+msgid "Documentation for texlive-dejavu"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uebungsblatt)
-msgid "A LaTeX class for writing exercise sheets"
-msgstr ""
+#. description(texlive-specs-f:texlive-dejavu-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dejavu"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-recipe)
-msgid "A LaTeX class to typeset recipes"
+#. summary(texlive-specs-f:texlive-dejavu-fonts)
+msgid "Severed fonts for texlive-dejavu"
msgstr ""
-#. summary(texlive-latex-course)
-msgid "A LaTeX course as a projected presentation"
+#. description(texlive-specs-f:texlive-dejavu-fonts)
+msgid "The separated fonts package for texlive-dejavu"
msgstr ""
-#. summary(texlive-latex4wp)
-msgid "A LaTeX guide specifically designed for word processor users"
+#. summary(texlive-specs-f:texlive-delim)
+msgid "Simplify typesetting mathematical delimiters"
msgstr ""
-#. description(texlive-yfonts)
+#. description(texlive-specs-f:texlive-delim)
msgid ""
-"A LaTeX interface to the old-german fonts designed by Yannis Haralambous: Gothic, Schwabacher, Fraktur and the baroque initials.\n"
+"The package permits simpler control of delimiters without excessive use of \\big... commands (and the like).\n"
"\n"
-"date: 2007-03-01 22:46:20 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tpslifonts)
-msgid "A LaTeX package for configuring presentation fonts"
+#. summary(texlive-specs-f:texlive-delim-doc)
+#, fuzzy
+msgid "Documentation for texlive-delim"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-delim-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-delim"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-delimtxt)
+msgid "Read and parse text tables"
msgstr ""
-#. description(texlive-manfnt)
+#. description(texlive-specs-f:texlive-delimtxt)
msgid ""
-"A LaTeX package for easy access to the symbols of the Knuth's 'manual' font, such as the Dangerous Bend and Manual-errata Arrow.\n"
+"This experimental package can read and parse text tables delimited by user-defined tokens (e.g., tab). It can be used for serial letters and the like, making it easier to export the data file from MS-Excel/MS-Word\n"
"\n"
-"date: 2007-01-02 13:43:33 +0000"
+"date: 2012-11-14 10:01:29 +0000"
msgstr ""
-#. description(texlive-sf298)
-msgid ""
-"A LaTeX package for generating a completed standard form 298 (Rev. 8-98) as prescribed by ANSI Std. Z39.18 for report documentation as part of a document delivered, for instance, on a U.S. government contract.\n"
-"\n"
-"date: 2007-01-14 21:06:18 +0000"
+#. summary(texlive-specs-f:texlive-delimtxt-doc)
+#, fuzzy
+msgid "Documentation for texlive-delimtxt"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-delimtxt-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-delimtxt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-detex)
+msgid "Strip TeX from a source file"
msgstr ""
-#. description(texlive-textopo)
+#. description(texlive-specs-f:texlive-detex)
msgid ""
-"A LaTeX package for setting shaded and annotated membrane protein topology plots and helical wheels.\n"
+"Detex is a program to remove TeX constructs from a text file. It recognizes the \\input command. The program assumes it is dealing with LaTeX input if it sees the string \\begin{document} in the text. In this case, it also recognizes the \\include and \\includeonly commands.\n"
"\n"
-"date: 2011-06-02 19:02:40 +0000"
+"date: 2012-05-07 20:13:48 +0000"
msgstr ""
-#. description(texlive-xecjk)
-msgid ""
-"A LaTeX package for typesetting CJK documents in the way users have become used to, in the CJK package. The package requires a current version of xtemplate (and hence of the current LaTeX 3 development environment.\n"
-"\n"
-"date: 2013-05-27 18:07:27 +0000"
+#. summary(texlive-specs-f:texlive-detlev-cm)
+#, fuzzy
+#| msgid "Package delim"
+msgid "Package detlev-cm"
+msgstr "Balíček delim"
+
+#. description(texlive-specs-f:texlive-detlev-cm)
+#, fuzzy
+msgid "The detlev-cm package"
+msgstr "dosutils CD dir - interní balíček."
+
+#. summary(texlive-specs-f:texlive-detlev-cm-doc)
+#, fuzzy
+msgid "Documentation for texlive-detlev-cm"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-detlev-cm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-detlev-cm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-filesystem:texlive-devel)
+#, fuzzy
+msgid "Basic development packages for TeXLive"
+msgstr "Vývojový balíček pro openobex"
+
+#. description(texlive-filesystem:texlive-devel)
+msgid "This package will cause the installation of several development packages for TeXLive."
msgstr ""
-#. description(texlive-ltxindex)
-msgid ""
-"A LaTeX package that allows the user to make indexes with GNU's Texindex program, instead of makeindex. It provides the indexing commands available in Texinfo by default, but only defines the concept index (cp) by default -- the user must define other standard indexes, and there is no provision for custom indexes. The package is not currently maintained.\n"
-"\n"
-"date: 2009-10-01 18:18:08 +0000"
+#. summary(texlive-specs-f:texlive-devnag)
+#. summary(texlive-specs-y:texlive-velthuis)
+msgid "Typeset Devanagari"
msgstr ""
-#. description(texlive-lcd)
+#. description(texlive-specs-f:texlive-devnag)
+#. description(texlive-specs-y:texlive-velthuis)
msgid ""
-"A LaTeX package that will display text as on an LCD display. Assumes 8-bit input in its internal verbatim-style environment.\n"
+"Frans Velthuis' preprocessor for Devanagari text, and fonts and macros to use when typesetting the processed text. The macros provide features that support Sanskrit, Hindi, Marathi, Nepali, and other languages typically printed in the Devanagari script. The package provides fonts, in both Metafont and Type 1 formats. Users of modern TeX distributions may care to try the XeTeX based package, which is far preferable for users who can type Unicode text.\n"
"\n"
-"date: 2006-11-14 19:05:17 +0000"
+"date: 2013-12-13 10:15:58 +0000"
msgstr ""
-#. description(texlive-labels)
+#. summary(texlive-specs-f:texlive-dhua)
+msgid "German abbreviations using thin space"
+msgstr ""
+
+#. description(texlive-specs-f:texlive-dhua)
msgid ""
-"A LaTeX package to print a regular grid of ragged-right labels on a page, suitable for sheets of labels which can be fed through a printer. Macros are provided to allow easy input of names and addresses in a form free of TeX markup. Equally useful is a feature for making multiple copies of a single label, e.g., return address stickers to go with the labels. Rows, columns, borders can all be specified to match the label sheet being used.\n"
+"The package provides commands for those abbreviations of German phrases for which the use of thin space is recommended. Setup commands \\newdhua and \\newtwopartdhua are provided, as well as commands for single cases (such as \\zB for 'z. B.', saving the user from typing such as 'z.\\,B.'). To typeset the documentation, the niceverb package, version 0.44, or later, is required. Das Paket `dhua' stellt Befehle fur sog. mehrgliedrige Abkurzungen bereit, fur die schmale Leerzeichen (Festabstande) empfohlen werden (Duden, Wikipedia). In die englische Paketdokumentation sind deutsche Erlauterungen eingestreut.\n"
"\n"
-"date: 2009-09-28 22:01:21 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ltxindex)
-msgid "A LaTeX package to typeset indices with GNU's Texindex"
+#. summary(texlive-specs-f:texlive-dhua-doc)
+#, fuzzy
+msgid "Documentation for texlive-dhua"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-dhua-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dhua"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-diagbox)
+msgid "Table heads with diagonal lines"
msgstr ""
-#. description(texlive-keystroke)
+#. description(texlive-specs-f:texlive-diagbox)
msgid ""
-"A LaTeX package which provides macros for the graphical representation of the keys on a computer keyboard.\n"
+"The package's principal command, \\diagbox, takes two arguments (texts for the slash-separated parts of the box), and an optional argument with which the direction the slash will go, and the box dimensions, etc., may vbe controlled. The package also provides \\slashbox and \\backslashbox commands for compatibility with the slashbox package, which it supersedes.\n"
"\n"
-"date: 2010-04-23 11:36:14 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-latexcheat)
+#. summary(texlive-specs-f:texlive-diagbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-diagbox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-diagbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-diagbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-diagmac2)
+msgid "Diagram macros, using pict2e"
+msgstr ""
+
+#. description(texlive-specs-f:texlive-diagmac2)
msgid ""
-"A LaTeX reference sheet for writing scientific papers. Unlike many other such sheets, this sheet does not focus on typesetting mathematics (though it does list some symbols).\n"
+"This is a development of the long-established diagmac package, using pict2e so that the restrictions on line direction are removed.\n"
"\n"
-"date: 2009-04-07 06:49:48 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-qcm)
-msgid "A LaTeX2e class for making multiple choice questionnaires"
+#. summary(texlive-specs-f:texlive-diagmac2-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-diagmac2"
+msgstr "Dokumentace pro digiKam"
+
+#. description(texlive-specs-f:texlive-diagmac2-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-diagmac2"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-diagnose)
+msgid "A diagnostic tool for a TeX installation"
msgstr ""
-#. description(texlive-umich-thesis)
+#. description(texlive-specs-f:texlive-diagnose)
msgid ""
-"A LaTeX2e class to create a University of Michigan dissertation according to the Rackham dissertation handbook.\n"
+"Provides macros to assist evaluation of the capabilities of a TeX installation (i.e., what extensions it supports). An example document that examines the installation is available.\n"
"\n"
-"date: 2009-09-27 09:52:43 +0000"
+"date: 2012-06-19 14:44:25 +0000"
msgstr ""
-#. description(texlive-t-angles)
-msgid ""
-"A LaTeX2e package for drawing tangles, trees, Hopf algebra operations and other pictures. It is based on emTeX or TPIC \\special's. Therefore, it can be used with the most popular drivers, including emTeX drivers, dviwin, xdvi and dvips, and (using some code from ConTeXt) it may also be used with PDFLaTeX.\n"
-"\n"
-"date: 2007-03-12 13:32:12 +0000"
+#. summary(texlive-specs-f:texlive-diagnose-doc)
+#, fuzzy
+msgid "Documentation for texlive-diagnose"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-diagnose-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-diagnose"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dialogl)
+msgid "Macros for constructing interactive LaTeX scripts"
msgstr ""
-#. description(texlive-sectsty)
+#. description(texlive-specs-f:texlive-dialogl)
msgid ""
-"A LaTeX2e package to help change the style of any or all of LaTeX's sectional headers in the article, book, or report classes. Examples include the addition of rules above or below a section title.\n"
+"Gathers together a bunch of code and examples about how to write macros to carry on a dialogue with the user.\n"
"\n"
-"date: 2007-01-14 14:20:52 +0000"
+"date: 2013-11-21 20:20:37 +0000"
msgstr ""
-#. description(vhba-kmp:vhba-kmp-pae)
-msgid "A Linux kernel module implementing a virtual SCSI Host Bus Adapter to act as a low-level SCSI driver and which provides the SCSI layer with a virtual SCSI adapter which can have multiple virtual devices. It is part of the userspace cdemu suite, CD/DVD-ROM device emulator for Linux."
-msgstr ""
+#. summary(texlive-specs-f:texlive-dialogl-doc)
+#, fuzzy
+msgid "Documentation for texlive-dialogl"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-makecirc)
-msgid "A MetaPost library for drawing electrical circuit diagrams"
-msgstr ""
+#. description(texlive-specs-f:texlive-dialogl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dialogl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-coil)
-msgid "A PSTricks package for coils, etcetera"
+#. summary(texlive-specs-f:texlive-dice)
+msgid "A font for die faces"
msgstr ""
-#. summary(texlive-pst-2dplot)
-msgid "A PSTricks package for drawing 2D curves"
-msgstr ""
-
-#. description(texlive-pst-light3d)
+#. description(texlive-specs-f:texlive-dice)
msgid ""
-"A PSTricks package for three dimensional lighting effects on characters and PSTricks graphics, like lines, curves, plots, ...\n"
+"A Metafont font that can produce die faces in 2D or with various 3D effects.\n"
"\n"
-"date: 2007-03-11 15:56:01 +0000"
+"date: 2013-11-21 20:20:37 +0000"
msgstr ""
-#. summary(texlive-pst-3d)
-msgid "A PSTricks package for tilting and other pseudo-3D tricks"
+#. summary(texlive-specs-f:texlive-dice-doc)
+#, fuzzy
+msgid "Documentation for texlive-dice"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-dice-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dice"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dichokey)
+msgid "Construct dichotomous identification keys"
msgstr ""
-#. description(texlive-uml)
+#. description(texlive-specs-f:texlive-dichokey)
msgid ""
-"A PSTricks related package for writing UML (Unified Modelling Language) diagrams in LaTeX. Currently, it implements a subset of class diagrams, and some extra constructs as well. The package cannot be used together with pst-uml.\n"
+"The package can be used to construct dichotomous identification keys (used especially in biology for species identification), taking care of numbering and indentation of successive key steps automatically. An example file is provided, which demonstrates usage.\n"
"\n"
-"date: 2010-03-17 11:19:20 +0000"
+"date: 2012-06-19 16:43:32 +0000"
msgstr ""
-#. summary(texlive-mathspic)
-msgid "A Perl filter program for use with PiCTeX"
+#. summary(texlive-specs-f:texlive-dichokey-doc)
+#, fuzzy
+msgid "Documentation for texlive-dichokey"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-dichokey-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dichokey"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dickimaw)
+msgid "Books and tutorials from the \"Dickimaw LaTeX Series\""
msgstr ""
-#. description(texlive-pdfcrop)
+#. description(texlive-specs-f:texlive-dickimaw)
msgid ""
-"A Perl script that can either trim pages of any whitespace border, or trim them of a fixed border.\n"
+"The package provides are some of the books and tutorials that form part of the \"Dickimaw LaTeX Series\". Only the A4 PDF is included here. Other formats, such as HTML or a screen optimized PDF, are available from the package home page. Books included are: \"LaTeX for Complete Novices\": an introductory guide to LaTeX. \"Using LaTeX to Write a PhD Thesis\": a follow- on from \"LaTeX for Complete Novices\" geared towards students who want to use LaTeX to write their PhD thesis. \"Creating a LaTeX minimal example\": describes how to create a minimal example, which can be used as a debugging aid when you encounter errors in your LaTeX documents.\n"
"\n"
-"date: 2012-10-25 08:45:27 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-thumbpdf)
-msgid ""
-"A Perl script that provides support for thumbnails in pdfTeX and dvips/ps2pdf. The script uses ghostscript to generate the thumbnails which get represented in a TeX readable file that is read by the package thumbpdf.sty to automatically include the thumbnails. This arrangement works with both plain TeX and LaTeX.\n"
-"\n"
-"date: 2012-11-14 17:32:01 +0000"
+#. summary(texlive-specs-f:texlive-dictsym)
+msgid "DictSym font and macro package"
msgstr ""
-#. description(texlive-lshort-persian)
+#. description(texlive-specs-f:texlive-dictsym)
msgid ""
-"A Persian (Farsi) translation of Oetiker's (not so) short introduction.\n"
+"This directory contains the DictSym Type1 font designed by Georg Verweyen and all files required to use it with LaTeX on the Unix or PC platforms. The font provides a number of symbols commonly used in dictionaries. The accompanying macro package makes the symbols accessible as LaTeX commands.\n"
"\n"
-"date: 2009-11-09 22:05:00 +0000"
+"date: 2014-04-24 15:14:31 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-colorsel)
-msgid "A RGB/HSV color selector"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dictsym-doc)
+#, fuzzy
+msgid "Documentation for texlive-dictsym"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mpman-ru)
+#. description(texlive-specs-f:texlive-dictsym-doc)
#, fuzzy
-msgid "A Russian translation of the MetaPost manual"
-msgstr "Ruské překlady pro KDE"
+msgid "This package includes the documentation for texlive-dictsym"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xits)
-msgid "A Scientific Times-like font with support for mathematical typesetting"
+#. summary(texlive-specs-f:texlive-dictsym-fonts)
+msgid "Severed fonts for texlive-dictsym"
msgstr ""
-#. summary(texlive-simplified-latex)
-msgid "A Simplified Introduction to LaTeX"
+#. description(texlive-specs-f:texlive-dictsym-fonts)
+msgid "The separated fonts package for texlive-dictsym"
msgstr ""
-#. description(texlive-lshort-slovak)
-msgid ""
-"A Slovak translation of Oetiker's (not so) short introduction.\n"
-"\n"
-"date: 2006-12-30 00:42:23 +0000"
+#. summary(texlive-specs-f:texlive-digiconfigs)
+msgid "Writing \"configurations\""
msgstr ""
-#. description(texlive-lshort-slovenian)
+#. description(texlive-specs-f:texlive-digiconfigs)
msgid ""
-"A Slovenian translation of the Not So Short Introduction to LaTeX 2e.\n"
+"In Stochastic Geometry and Digital Image Analysis some problems can be solved in terms of so-called \"configurations\". A configuration is basically a square matrix of \\circ and \\bullet symbols. This package provides a convenient and compact mechanism for displaying these configurations.\n"
"\n"
-"date: 2008-08-22 08:50:40 +0000"
+"date: 2012-06-19 16:43:32 +0000"
msgstr ""
-#. description(texlive-lshort-spanish)
-msgid ""
-"A Spanish translation of the Short Introduction to LaTeX2e, version 20.\n"
-"\n"
-"date: 2010-03-01 00:49:06 +0000"
+#. summary(texlive-specs-f:texlive-digiconfigs-doc)
+#, fuzzy
+msgid "Documentation for texlive-digiconfigs"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-f:texlive-digiconfigs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-digiconfigs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-din1505)
+msgid "Bibliography styles for German texts"
msgstr ""
-#. description(texlive-l2tabu-spanish)
+#. description(texlive-specs-f:texlive-din1505)
msgid ""
-"A Spanish translation of the l2tabu practical guide to LaTeX2e by Mark Trettin. A list of obsolete packages, commands and usages.\n"
+"A set of bibliography styles that conformt to DIN 1505, and match the original BibTeX standard set (plain, unsrt, alpha and abbrv), together with a style natdin to work with natbib.\n"
"\n"
-"date: 2008-08-22 08:50:40 +0000"
+"date: 2012-06-19 16:43:32 +0000"
msgstr ""
-#. summary(texlive-pdftex)
-msgid "A TeX extension for direct creation of PDF"
+#. summary(texlive-specs-f:texlive-din1505-doc)
+#, fuzzy
+msgid "Documentation for texlive-din1505"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-din1505-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-din1505"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dinat)
+msgid "Bibliography style for German texts"
msgstr ""
-#. description(texlive-startex)
+#. description(texlive-specs-f:texlive-dinat)
msgid ""
-"A TeX format designed to help students write short reports and essays. It provides the user with a suitable set of commands for such a task. It is also more robust than plain TeX and LaTeX.\n"
+"Bibliography style files intended for texts in german. They draw up bibliographies in accordance with the german DIN 1505, parts 2 and 3.\n"
"\n"
-"date: 2008-12-31 19:54:46 +0000"
+"date: 2012-06-19 16:43:32 +0000"
msgstr ""
-#. summary(texlive-psizzl)
-msgid "A TeX format for physics papers"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dinat-doc)
+#, fuzzy
+msgid "Documentation for texlive-dinat"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pinlabel)
-msgid "A TeX labelling package"
-msgstr ""
+#. description(texlive-specs-f:texlive-dinat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dinat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-insbox)
-msgid "A TeX macro for inserting pictures/boxes into paragraphs"
+#. summary(texlive-specs-f:texlive-dinbrief)
+msgid "German letter DIN style"
msgstr ""
-#. summary(texlive-latex)
-msgid "A TeX macro package that defines LaTeX"
+#. description(texlive-specs-f:texlive-dinbrief)
+msgid ""
+"Implements a document layout for writing letters according to the rules of DIN (Deutsches Institut fur Normung, German standardisation institute). A style file for LaTeX 2.09 (with limited support of the features) is part of the package. Since the letter layout is based on a German standard, the user guide is written in German, but most macros have English names from which the user can recognize what they are used for. In addition there are example files showing how letters may be created with the package. A graphical interface for use of the dinbrief is provided in the dinbrief-GUI bundle.\n"
+"\n"
+"date: 2012-07-17 14:43:33 +0000"
msgstr ""
-#. summary(texlive-ptex)
+#. summary(texlive-specs-f:texlive-dinbrief-doc)
#, fuzzy
-msgid "A TeX system for publishing in Japanese"
-msgstr "Menu systém pro TeX pro X Window System"
+msgid "Documentation for texlive-dinbrief"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-junicode)
+#. description(texlive-specs-f:texlive-dinbrief-doc)
#, fuzzy
-msgid "A TrueType font for mediaevalists"
-msgstr "Prohlížeč unicodových písem"
+msgid "This package includes the documentation for texlive-dinbrief"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lshort-turkish)
+#. summary(texlive-specs-f:texlive-dingbat)
+msgid "Two dingbat symbol fonts"
+msgstr ""
+
+#. description(texlive-specs-f:texlive-dingbat)
msgid ""
-"A Turkish translation of Oetiker's (not so) short introduction.\n"
+"The fonts (ark10 and dingbat) are specified in Metafont; support macros are provided for use in LaTeX. An Adobe Type 1 version of the fonts is available in the niceframe fonts bundle.\n"
"\n"
-"date: 2007-03-09 11:50:50 +0000"
+"date: 2014-04-24 15:14:31 +0000"
msgstr ""
-#. summary(transmageddon)
-msgid "A Video Transcoder"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dingbat-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-dingbat"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-visualfaq)
-msgid "A Visual LaTeX FAQ"
-msgstr ""
+#. description(texlive-specs-f:texlive-dingbat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dingbat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mentis)
-msgid "A basis for books to be published by Mentis publishers"
+#. summary(texlive-specs-f:texlive-directory)
+msgid "An address book using BibTeX"
msgstr ""
-#. description(texlive-latex-course)
+#. description(texlive-specs-f:texlive-directory)
msgid ""
-"A brief Beamer-based slide presentation on LaTeX, based on Rupprecht's LaTeX 2.09 course, which the author has translated to English and taken to LaTeX2e/Beamer. Additional material was taken from the Short Introduction to LaTeX.\n"
+"A package for LaTeX and BibTeX that facilitates the construction, maintenance and exploitation of an address book- like database.\n"
"\n"
-"date: 2008-08-22 14:39:18 +0000"
+"date: 2012-12-19 19:26:21 +0000"
msgstr ""
-#. description(texlive-js-misc)
+#. summary(texlive-specs-f:texlive-directory-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-directory"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-f:texlive-directory-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-directory"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dirtree)
+msgid "Display trees in the style of windows explorer"
+msgstr ""
+
+#. description(texlive-specs-f:texlive-dirtree)
msgid ""
-"A bunch of packages, including: - idverb.tex, for 'short verbatim'; - xfig.tex, for including xfig/transfig output in a TeX document; and - cassette.tex for setting cassette labels.\n"
+"This package is designed to emulate the way windows explorer displays directory and file trees, with the root at top left, and each level of subtree displaying one step in to the right. The macros work equally well with Plain TeX and with LaTeX.\n"
"\n"
-"date: 2009-11-28 11:18:01 +0000"
+"date: 2012-12-13 09:43:21 +0000"
msgstr ""
-#. description(texlive-ms)
+#. summary(texlive-specs-f:texlive-dirtree-doc)
+#, fuzzy
+msgid "Documentation for texlive-dirtree"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-f:texlive-dirtree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dirtree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dirtytalk)
+msgid "A package to typeset quotations easier"
+msgstr ""
+
+#. description(texlive-specs-f:texlive-dirtytalk)
msgid ""
-"A bundle of LaTeX packages by Martin Schroder; the collection comprises: - count1to, make use of fixed TeX counters; - everysel, set commands to execute every time a font is selected; - everyshi, set commands to execute whenever a page is shipped out; - multitoc, typeset the table of contents in multiple columns; - prelim2e, mark typeset pages as preliminary; and - ragged2e, typeset ragged text and allow hyphenation.\n"
+"The package provides a macro to typeset quotations, using the command \\say{stuff}. The quotation mark glyphs are inserted by the macro; nested quotations are detected.\n"
"\n"
-"date: 2012-05-24 15:58:39 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-yafoot)
-msgid "A bundle of miscellaneous footnote packages"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dirtytalk-doc)
+#, fuzzy
+msgid "Documentation for texlive-dirtytalk"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lcdftypetools)
+#. description(texlive-specs-f:texlive-dirtytalk-doc)
#, fuzzy
-#| msgid "Ken Lunde's Japanese Code Manipulation Tools"
-msgid "A bundle of outline font manipulation tools"
-msgstr "Sada nástrojů pro manipulace s japonskými kódováními Kena Lundeho"
+msgid "This package includes the documentation for texlive-dirtytalk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-preprint)
-msgid "A bundle of packages provided \"as is\""
+#. summary(texlive-specs-f:texlive-disser)
+msgid "Class and templates for typesetting dissertations in Russian"
msgstr ""
-#. summary(texlive-oberdiek)
-msgid "A bundle of packages submitted by Heiko Oberdiek"
-msgstr ""
-
-#. description(texlive-was)
+#. description(texlive-specs-f:texlive-disser)
msgid ""
-"A bundle of packages that arise in the author's area of interest: - compliance of maths typesetting with ISO standards;\n"
-"- symbols that work in both maths and text modes; - commas for both decimal separator and maths; and - upright Greek letters in maths.\n"
+"Disser comprises a document class and set of templates for typesetting dissertations in Russian. One of its primary advantages is a simplicity of format specification for titlepage, headers and elements of automatically generated lists (table of contents, list of figures, etc). Bibliography styles, that conform to the requirements of the Russian standard GOST R 7.0.11-2011, are provided.\n"
"\n"
-"date: 2011-02-15 09:33:56 +0000"
+"date: 2013-12-30 10:37:42 +0000"
msgstr ""
-#. summary(texlive-sauerj)
-msgid "A bundle of utilities by Jonathan Sauer"
-msgstr ""
+#. summary(texlive-specs-f:texlive-disser-doc)
+#, fuzzy
+msgid "Documentation for texlive-disser"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-koma-script)
-msgid "A bundle of versatile classes and packages"
+#. description(texlive-specs-f:texlive-disser-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-disser"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dk-bib)
+msgid "Danish variants of standard BibTeX styles"
msgstr ""
-#. description(webdot)
-msgid "A cgi-bin program that produces clickable graphs in web pages when provided with an href to a .dot file. Uses Tcldot from the graphviz rpm. By default, only requests from localhost are served."
-msgstr "Program, který funguje jako CGI skript a produkuje klikatelné grafy na WWW stránkách při použití odkazu na .dot soubory. Používá Tcldot z rpm balíku graphviz. Implicitně odpovídá pouze na požadavky z vlastního počítače."
-
-#. description(texlive-spie)
+#. description(texlive-specs-f:texlive-dk-bib)
msgid ""
-"A class and a BibTeX style are provided.\n"
+"Dk-bib is a translation of the four standard BibTeX style files (abbrv, alpha, plain and unsrt) and the apalike style file into Danish. The files have been extended with URL, ISBN, ISSN, annote and printing fields which can be enabled through a LaTeX style file. Dk-bib also comes with a couple of Danish sorting order files for BibTeX8.\n"
"\n"
-"date: 2007-04-25 13:28:03 +0000"
+"date: 2012-06-28 21:28:54 +0000"
msgstr ""
-#. description(texlive-standalone)
+#. summary(texlive-specs-f:texlive-dk-bib-doc)
+#, fuzzy
+msgid "Documentation for texlive-dk-bib"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-dk-bib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dk-bib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dlfltxb)
+msgid "Macros related to \"Introdktion til LaTeX\""
+msgstr ""
+
+#. description(texlive-specs-f:texlive-dlfltxb)
msgid ""
-"A class and package is provided which allows TeX pictures or other TeX code to be compiled standalone or as part of a main document. Special support for pictures with beamer overlays is also provided. The package is used in the main document and skips extra preambles in sub-files. The class may be used to simplify the preamble in sub-files. By default the preview package is used to display the code without margins. The behaviour in standalone mode may adjusted using a configuration file standalone.cfg to redefine the standalone environment.\n"
+"The bundle contains various macros either used for creating the author's book \"Introduktion til LaTeX\" (in Danish), or presented in the book as code tips. The bundle comprises: dlfltxbcodetips: various macros helpful in typesetting mathematics; dlfltxbmarkup: provides a macros used throughout the book, for registering macro names, packages etc. in the text, in the margin and in the index, all by using categorised keys (note, a configuration file may be used; a sample is included in the distribution); dlfltxbtocconfig: macros for the two tables of contents that the book has; dlfltxbmisc: various macros for typesetting LaTeX arguments, and the macro used in the bibliography that can wrap a URL up into a bibtex entry. Interested parties may review the book itself on the web at the author's institution (it is written in Danish).\n"
"\n"
-"date: 2012-09-15 18:44:35 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-play)
+#. summary(texlive-specs-f:texlive-dlfltxb-doc)
+#, fuzzy
+msgid "Documentation for texlive-dlfltxb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-f:texlive-dlfltxb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dlfltxb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-f:texlive-dnaseq)
+msgid "Format DNA base sequences"
+msgstr ""
+
+#. description(texlive-specs-f:texlive-dnaseq)
msgid ""
-"A class and style file that supports the typesetting of plays, including options for line numbering.\n"
+"Defines a means of specifying sequences of bases. The bases may be numbered (per line) and you may specify that subsequences be coloured. For a more 'vanilla-flavoured' way of typesetting base sequences, the user might consider the seqsplit package.\n"
"\n"
-"date: 2007-01-13 19:56:44 +0000"
+"date: 2012-07-03 15:35:36 +0000"
msgstr ""
-#. summary(texlive-screenplay)
-msgid "A class file to typeset screenplays"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dnaseq-doc)
+#, fuzzy
+msgid "Documentation for texlive-dnaseq"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nih)
+#. description(texlive-specs-f:texlive-dnaseq-doc)
#, fuzzy
-#| msgid "Fonts for TV Applications"
-msgid "A class for NIH grant applications"
-msgstr "Písma pro TV aplikace"
+msgid "This package includes the documentation for texlive-dnaseq"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-protocol)
-msgid "A class for minutes of meetings"
-msgstr ""
+#. summary(texlive-specs-f:texlive-dnp)
+msgid "Package dnp"
+msgstr "Balíček dnp"
-#. summary(texlive-proposal)
-msgid "A class for preparing proposals"
+#. description(texlive-specs-f:texlive-dnp)
+msgid "The dnp package"
msgstr ""
-#. summary(texlive-petiteannonce)
-msgid "A class for small advertisements"
+#. summary(texlive-specs-f:texlive-doc-pictex)
+msgid "A summary list of PicTeX documentation"
msgstr ""
-#. description(texlive-seminar)
+#. description(texlive-specs-f:texlive-doc-pictex)
msgid ""
-"A class that produces overhead slides (transparencies), with many facilities. The class requires availability of the fancybox package. Seminar is also the basis of other classes, such as prosper. In fact, seminar is not nowadays reckoned a good basis for a presentation -- users are advised to use more recent classes such as powerdot or beamer, both of which are tuned to 21st-century presentation styles. Note that the seminar distribution relies on the xcomment package, which was once part of the bundle, but now has a separate existence.\n"
+"A summary of available resources providing (or merely discussing) documentation of PicTeX.\n"
"\n"
-"date: 2010-05-17 12:53:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-scrjrnl)
+#. summary(texlive-specs-g:texlive-docbytex)
+#, fuzzy
+msgid "Creating documentation from source code"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-docbytex)
msgid ""
-"A class, based on scrbook, designed for typesetting diaries, journals or devotionals.\n"
+"The package creates documentation from C source code, or other programming languages.\n"
"\n"
-"date: 2012-09-24 20:53:58 +0000"
+"date: 2014-05-09 19:42:53 +0000"
msgstr ""
-#. summary(whfc)
-msgid "A client for the network fax server HylaFAX 4.x under Microsoft Windows(r)"
-msgstr "Klient pro síťový faxový server HylaFAX 4.x pod Microsoft Windows(r)"
+#. summary(texlive-specs-g:texlive-docbytex-doc)
+#, fuzzy
+msgid "Documentation for texlive-docbytex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tools)
+#. description(texlive-specs-g:texlive-docbytex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-docbytex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-docmfp)
+msgid "Document non-LaTeX code"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-docmfp)
msgid ""
-"A collection of (variously) simple tools provided as part of the LaTeX required tools distribution, comprising: afterpage, array, bm, calc, dcolumn, delarray, enumerate, fileerr, fontsmpl, ftnright, hhline, indentfirst, layout, longtable, multicol, rawfonts, showkeys, somedefs, tabularx, theorem, trace, varioref, verbatim, xr, and xspace.\n"
+"Extends the doc package to cater for documenting non-LaTeX code, such as Metafont or Metapost, or other programming languages.\n"
"\n"
-"date: 2012-06-06 10:15:04 +0000"
+"date: 2012-07-03 15:36:19 +0000"
msgstr ""
-#. summary(texlive-ltxtools)
+#. summary(texlive-specs-g:texlive-docmfp-doc)
#, fuzzy
-#| msgid "A Collection of Free Arabic Fonts"
-msgid "A collection of LaTeX API macros"
-msgstr "Sbírka volně dostupných arabských písem"
+msgid "Documentation for texlive-docmfp"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-shipunov)
-msgid "A collection of LaTeX packages and classes"
+#. description(texlive-specs-g:texlive-docmfp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-docmfp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-docmute)
+msgid "Input files ignoring LaTeX preamble, etcetera"
msgstr ""
-#. description(texlive-ruhyphen)
+#. description(texlive-specs-g:texlive-docmute)
msgid ""
-"A collection of Russian hyphenation patterns supporting a number of Cyrillic font encodings, including T2, UCY (Omega Unicode Cyrillic), LCY, LWN (OT2), and koi8-r.\n"
+"Input or include stand-alone LaTeX documents, ignoring everything but the material between \\begin{document} and \\end{document}.\n"
"\n"
-"date: 2007-01-14 09:43:12 +0000"
+"date: 2012-03-22 15:41:56 +0000"
msgstr ""
-#. summary(texlive-pstricks-add)
+#. summary(texlive-specs-g:texlive-docmute-doc)
#, fuzzy
-msgid "A collection of add-ons and bugfixes for PSTricks"
-msgstr "Sbírka dalších kanálů pro používání Pilota pro GNOME"
+msgid "Documentation for texlive-docmute"
+msgstr "Dokumentace pro adaptx"
-#. description(xemacs-packages)
-msgid "A collection of additional lisp packages for XEmacs. You must install this package when you want to use the XEmacs package, they are needed for most non-trivial XEmacs functions."
-msgstr "Kolekce přídavných lisp balíčků pro XEmacs. Tento balíček musíte nainstalovat, obsahuje mnoho potřebných funkcí."
+#. description(texlive-specs-g:texlive-docmute-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-docmute"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-juramisc)
+#. summary(texlive-specs-g:texlive-documentation)
+#, fuzzy
+#| msgid "Documentation System for C, C++, IDL, and Java"
+msgid "Documentation support for C, Java and assembler code"
+msgstr "Dokumentační systém pro C, C++, IDL a Java"
+
+#. description(texlive-specs-g:texlive-documentation)
msgid ""
-"A collection of classes for typesetting court sentences, legal opinions, and dissertations for German lawyers. The package is still under development.\n"
+"The package provides a simple means of typesetting computer programs such that the result is acceptable for inclusion in reports, etc.\n"
"\n"
-"date: 2007-11-23 18:34:36 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-latex-fonts)
+#. summary(texlive-specs-g:texlive-documentation-doc)
#, fuzzy
-msgid "A collection of fonts used in LaTeX distributions"
-msgstr "Kolekce užitečných knihoven pro hry"
+msgid "Documentation for texlive-documentation"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ncctools)
+#. description(texlive-specs-g:texlive-documentation-doc)
#, fuzzy
-msgid "A collection of general packages for LaTeX"
-msgstr "Sbírka německých šablon pro OpenOffice.org."
+msgid "This package includes the documentation for texlive-documentation"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tdsfrmath)
-msgid ""
-"A collection of macros for French maths teachers in colleges and lycees (and perhaps elsewhere). It is hoped that the package will facilitate the everyday use of LaTeX by mathematics teachers.\n"
-"\n"
-"date: 2009-06-22 14:39:08 +0000"
+#. summary(texlive-specs-g:texlive-doi)
+msgid "Create correct hyperlinks for DOI numbers"
msgstr ""
-#. description(texlive-mfware)
+#. description(texlive-specs-g:texlive-doi)
msgid ""
-"A collection of programs (as web source) for processing the output of Metafont.\n"
+"You can hyperlink DOI numbers to dx.doi.org. However, some publishers have elected to use nasty characters in their DOI numbering scheme ('<', '>', '_' and ';' have all been spotted). This will either upset (La)TeX, or your PDF reader. This package contains a single user-level command \\doi{}, which takes a DOI number, and creates a correct hyperlink to the target of the DOI.\n"
"\n"
-"date: 2012-06-24 09:08:44 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-was)
+#. summary(texlive-specs-g:texlive-doi-doc)
#, fuzzy
-msgid "A collection of small packages by Walter Schmidt"
-msgstr "Kolekce užitečných knihoven pro hry"
+msgid "Documentation for texlive-doi"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ifsym)
+#. description(texlive-specs-g:texlive-doi-doc)
#, fuzzy
-#| msgid "A Collection of How-Tos"
-msgid "A collection of symbols"
-msgstr "Sada HOWTO"
+msgid "This package includes the documentation for texlive-doi"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lhcyr)
-msgid ""
-"A collection of three LaTeX 2e styles intended for typesetting Russian and bilingual English-Russian documents, using the lh fonts and without the benefit of babel's language-switching mechanisms. The packages (lhcyralt and lhcyrwin for use under emTeX, and lhcyrkoi for use under teTeX) provide mappings between the input encoding and the font encoding (which is described as OT1). The way this is done does not match the way inputenc would do the job, for output via fontenc to one of the T2 series of font encodings.\n"
-"\n"
-"date: 2012-05-22 09:10:15 +0000"
+#. summary(texlive-specs-g:texlive-doipubmed)
+msgid "Special commands for use in bibliographies"
msgstr ""
-#. description(texlive-sttools)
+#. description(texlive-specs-g:texlive-doipubmed)
msgid ""
-"A collection of tools and macros, including: - a document \"Inside LaTeX2e kernel\" (which discusses some of the functions of the packages), - miscellaneous float control, - page styles for floats, - multipage tabulars, - even columns at end of twocolumn region, - switching between one- and two-column anywhere, - getting more mileage from \\marginpar, - simulating the effect of \"midfloats\", - create a bounding box, - a package to manipulate numerical lists and arrays.\n"
+"The package provides the commands \\doi, \\pubmed and \\citeurl. These commands are primarily designed for use in bibliographies. A LaTeX2HTML style file is also provided.\n"
"\n"
-"date: 2012-10-18 09:44:44 +0000"
+"date: 2012-06-20 16:12:53 +0000"
msgstr ""
-#. description(texlive-moreverb)
-msgid ""
-"A collection of verbatim facilities that provide line-numbered verbatim, verbatim that obey's TAB characters, verbatim input and verbatim output to file. The package makes use of the LaTeX required verbatim package. The package formed from a series of small pieces, and is somewhat unstructured. The user who looks for thought-through verbatim facilities is advised to consider using the fancyvrb package in place of moreverb.\n"
-"\n"
-"date: 2011-04-18 20:03:09 +0000"
-msgstr ""
+#. summary(texlive-specs-g:texlive-doipubmed-doc)
+#, fuzzy
+msgid "Documentation for texlive-doipubmed"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pb-diagram)
-msgid "A commutative diagram package using LAMSTeX or Xy-pic fonts"
-msgstr ""
+#. description(texlive-specs-g:texlive-doipubmed-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-doipubmed"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latexfileinfo-pkgs)
-msgid "A comparison of packages showing LaTeX file information"
+#. summary(texlive-specs-g:texlive-dosepsbin)
+msgid "Deal with DOS binary EPS files"
msgstr ""
-#. summary(texlive-kpfonts)
-msgid "A complete set of fonts for text and mathematics"
+#. description(texlive-specs-g:texlive-dosepsbin)
+msgid ""
+"A Encapsulated PostScript (EPS) file may given in a special binary format to support the inclusion of a thumbnail. This file format, commonly known as DOS EPS format starts with a binary header that contains the positions of the possible sections: Postscript (PS); Windows Metafile Format (WMF); and Tag Image File Format (TIFF). The PS section must be present and either the WMF file or the TIFF file should be given. The package provides a Perl program that will extract any of the sections of such a file, in particular providing a 'text'-form EPS file for use with (La)TeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-siunitx)
-msgid "A comprehensive (SI) units package"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dosepsbin-doc)
+#, fuzzy
+msgid "Documentation for texlive-dosepsbin"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mathmode)
-msgid "A comprehensive review of mathematics in (La)TeX"
+#. description(texlive-specs-g:texlive-dosepsbin-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dosepsbin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dot2texi)
+msgid "Create graphs within LaTeX using the dot2tex tool"
msgstr ""
-#. description(texlive-lgreek)
+#. description(texlive-specs-g:texlive-dot2texi)
msgid ""
-"A conversion of Silvio Levy's Plain TeX macros for use with LaTeX.\n"
+"The dot2texi package allows you to embed graphs in the DOT graph description language in your LaTeX documents. The dot2tex tool is used to invoke Graphviz for graph layout, and to transform the output from Graphviz to LaTeX code. The generated code relies on the TikZ and PGF package or the PSTricks package. The process is automated if shell escape is enabled.\n"
"\n"
-"date: 2011-03-14 19:27:38 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex4ht)
+#. summary(texlive-specs-g:texlive-dot2texi-doc)
+#, fuzzy
+msgid "Documentation for texlive-dot2texi"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dot2texi-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dot2texi"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dotarrow)
+msgid "Extendable dotted arrows"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-dotarrow)
msgid ""
-"A converter from TeX and LaTeX to SGML-based formats such as (X)HTML, MathML, OpenDocument, and DocBook, providing a configurable (La)TeX-based authoring system for hypertext. Tex4ht does not parse (La)TeX source (so that it avoids the difficulties encountered by many other converters, arising from the irregularity of (La)TeX syntax). Instead, Tex4ht uses (La)TeX itself (with an extra macro package) to produce a non- standard DVI file that it can then process. This technique allows TeX4ht to approach the robustness characteristic of restricted-syntax systems such as hyperlatex and gellmu. Note that CTAN no longer holds the definitive sources of the package: see the 'Readme' file.\n"
+"The package can draw dotted arrows that are extendable, in the same was as \\xrightarrow.\n"
"\n"
-"date: 2012-02-23 16:06:23 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-texilikecover)
-msgid "A cover-page package, like TeXinfo"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dotarrow-doc)
+#, fuzzy
+msgid "Documentation for texlive-dotarrow"
+msgstr "Dokumentace pro adaptx"
-#. description(tuxcursors)
-msgid "A cursor set that has nice animated penguins."
-msgstr ""
+#. description(texlive-specs-g:texlive-dotarrow-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dotarrow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-substances)
-msgid "A database of chemicals"
+#. summary(texlive-specs-g:texlive-dotseqn)
+msgid "Flush left equations with dotted leaders to the numbers"
msgstr ""
-#. description(texlive-simplecv)
+#. description(texlive-specs-g:texlive-dotseqn)
msgid ""
-"A derivative of the cv class available to lyx users (renamed to avoid the existing cv package).\n"
+"The package provides a different format for typesetting equations, one reportedly used in 'old style Britsh books': equations aligned on the left, with dots on the right leading to the equation number. In default of an equation number, the package operates much like the fleqn class option (no leaders).\n"
"\n"
-"date: 2008-08-23 13:48:35 +0000"
+"date: 2012-06-20 16:12:53 +0000"
msgstr ""
-#. summary(texlive-metapost)
+#. summary(texlive-specs-g:texlive-dotseqn-doc)
#, fuzzy
-#| msgid "Development environment for cairo"
-msgid "A development of Metafont for creating graphics"
-msgstr "Vývojové prostředí pro cairo"
+msgid "Documentation for texlive-dotseqn"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-omega)
-msgid ""
-"A development of TeX, which deals in multi-octet Unicode characters, to enable native treatment of a wide range of languages without changing character-set. Work on Omega seems, more or less, to have ceased: its immediate successor was to be the aleph project (though that too has stalled). Projects developing Omega (and Aleph) ideas include Omega-2 and LuaTeX.\n"
-"\n"
-"date: 2009-11-09 22:44:56 +0000"
+#. description(texlive-specs-g:texlive-dotseqn-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dotseqn"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dottex)
+msgid "Use dot code in LaTeX"
msgstr ""
-#. description(texlive-nkarta)
+#. description(texlive-specs-g:texlive-dottex)
msgid ""
-"A development of the karta font, offering more mathematical stability in MetaFont. A version that will produce the glyphs as Encapsulated PostScript, using MetaPost, is also provided.\n"
+"The dottex package allows you to encapsulate 'dot' and 'neato' files in your document (dot and neato are both part of graphviz; dot creates directed graphs, neato undirected graphs). If you have shell-escape enabled, the package will arrange for your files to be processed at LaTeX time; otherwise, the conversion must be done manually as an intermediate process before a second LaTeX run.\n"
"\n"
-"date: 2009-12-20 18:35:44 +0000"
+"date: 2012-05-07 20:13:48 +0000"
msgstr ""
-#. summary(texlive-latex-doc-ptr)
+#. summary(texlive-specs-g:texlive-dottex-doc)
#, fuzzy
-msgid "A direction-finder for LaTeX documentation"
-msgstr "Vývojářské balíky pro JACK"
+msgid "Documentation for texlive-dottex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-jura)
-msgid "A document class for German legal texts"
+#. description(texlive-specs-g:texlive-dottex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dottex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-doublestroke)
+msgid "Typeset mathematical double stroke symbols"
msgstr ""
-#. description(texlive-uowthesis)
+#. description(texlive-specs-g:texlive-doublestroke)
msgid ""
-"A document class for higher degree research theses in compliance with the specifications of University of Wollongong (UoW) theses in the \"Guidelines for Preparation and Submission of Higher Degree Research Theses\" (March 2006), by the Research Student Centre, Research & Innovation Division, UoW.\n"
+"A font based on Computer Modern Roman useful for typesetting the mathematical symbols for the natural numbers (N), whole numbers (Z), rational numbers (Q), real numbers (R) and complex numbers (C); coverage includes all Roman capital letters, '1', 'h' and 'k'. The font is available both as Metafont source and in Adobe Type 1 format, and LaTeX macros for its use are provided. The fonts appear in the blackboard bold sampler.\n"
"\n"
-"date: 2010-07-28 10:27:25 +0000"
+"date: 2014-04-24 19:17:57 +0000"
msgstr ""
-#. description(texlive-pittetd)
-msgid ""
-"A document class for theses and dissertations. Provides patch files that enable pittetd to use files prepared for use with the pittdiss or pitthesis classes. The manual provides a detailed guide for users who wish to use the class to prepare their thesis or dissertation.\n"
-"\n"
-"date: 2008-09-11 16:37:35 +0000"
+#. summary(texlive-specs-g:texlive-doublestroke-doc)
+#, fuzzy
+msgid "Documentation for texlive-doublestroke"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-doublestroke-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-doublestroke"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-doublestroke-fonts)
+msgid "Severed fonts for texlive-doublestroke"
msgstr ""
-#. summary(texlive-suftesi)
-msgid "A document class for typesetting theses, books and articles"
+#. description(texlive-specs-g:texlive-doublestroke-fonts)
+#, fuzzy
+#| msgid "Development package for libstroke"
+msgid "The separated fonts package for texlive-doublestroke"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-g:texlive-dowith)
+msgid "Apply a command to a list of items"
msgstr ""
-#. description(texlive-tikzposter)
+#. description(texlive-specs-g:texlive-dowith)
msgid ""
-"A document class provides a simple way of using TikZ for generating posters. Several formatting options are available, and spacing and layout of the poster is to a large extent automated.\n"
+"The package provides macros for applying a command to all elements of a list without separators, such as '\\DoWithAllIn{<cmd>}{<list-macro>}', and also for extending and reducing macros storing such lists. Applications in mind belonged to LaTeX, but the package should work with other formats as well. Loop and list macros in other packages are discussed. A further package, domore, is also provided, which enhances the functionality of dowith.\n"
"\n"
-"date: 2013-04-04 09:28:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-leaflet)
+#. summary(texlive-specs-g:texlive-dowith-doc)
+#, fuzzy
+msgid "Documentation for texlive-dowith"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dowith-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dowith"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-download)
+msgid "Allow LaTeX to download files using an external process"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-download)
msgid ""
-"A document class to create small hand-outs (flyers) that fit on a single sheet of paper which is then folded twice. Pages are rearranged by LaTeX so that they print correctly on a single sheet -- no external script is necessary. (Works with PostScript and PDF.) This is a complete reimplementation with permission of the original author Jurgen Schlegelmilch.\n"
+"The package allows the user to download files (using cURL or wget), from within a document. To run the external commands, LaTeX (or whatever) needs to be run with the --shell-escape flag; this creates a tension between your needs and the security implications of the flag; users should exercise due caution.\n"
"\n"
-"date: 2012-07-05 13:17:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tuned)
-msgid "A dynamic adaptive system tuning daemon"
+#. summary(texlive-specs-g:texlive-download-doc)
+#, fuzzy
+msgid "Documentation for texlive-download"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-download-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-download"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dox)
+msgid "Extend the doc package"
msgstr ""
-#. description(texlive-yannisgr)
+#. description(texlive-specs-g:texlive-dox)
msgid ""
-"A family of 7-bit fonts with a code table designed for setting modern polytonic Greek. The fonts are provided as Metafont source; macros to produce a Greek variant of Plain TeX (including a hyphenation table adapted to the fonts' code table) are provided.\n"
+"The doc package provides LaTeX developers with means to describe the usage and the definition of new macros and environments. However, there is no simple way to extend this functionality to other items (options or counters, for instance). The DoX package is designed to circumvent this limitation.\n"
"\n"
-"date: 2011-05-21 22:38:15 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-photo)
+#. summary(texlive-specs-g:texlive-dox-doc)
#, fuzzy
-msgid "A float environment for photographs"
-msgstr "Vývojářské prostředí pro libdvdread"
+msgid "Documentation for texlive-dox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sanskrit)
+#. description(texlive-specs-g:texlive-dox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dozenal)
+msgid "Typeset documents using base twelve numbering (also called \"dozenal\")"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-dozenal)
msgid ""
-"A font and pre-processor suitable for the production of documents written in Sanskrit. Type 1 versions of the fonts are available.\n"
+"The package supports typesetting documents whose counters are represented in base twelve, also called \"dozenal\". It includes a macro by David Kastrup for converting positive whole numbers to dozenal from decimal (base ten) representation. The package also includes a few other macros and redefines all the standard counters to produce dozenal output. Fonts, in Roman, italic, slanted, and boldface versions, provide ten and eleven (the Pitman characters preferred by the Dozenal Society of Great Britain). The fonts were designed to blend well with the Computer Modern fonts, and are available both as Metafont source and in Adobe Type 1 format.\n"
"\n"
-"date: 2007-01-14 09:43:12 +0000"
+"date: 2014-04-25 19:03:35 +0000"
msgstr ""
-#. summary(texlive-kixfont)
-msgid "A font for KIX codes"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dozenal-doc)
+#, fuzzy
+msgid "Documentation for texlive-dozenal"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-orkhun)
+#. description(texlive-specs-g:texlive-dozenal-doc)
#, fuzzy
-#| msgid "Optional fonts for Ghostscript"
-msgid "A font for orkhun script"
-msgstr "Volitelné fonty pro Ghostscript"
+msgid "This package includes the documentation for texlive-dozenal"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pigpen)
-msgid "A font for the pigpen (or masonic) cipher"
+#. summary(texlive-specs-g:texlive-dozenal-fonts)
+msgid "Severed fonts for texlive-dozenal"
msgstr ""
-#. summary(texlive-tfrupee)
-msgid "A font offering the new (Indian) Rupee symbol"
+#. description(texlive-specs-g:texlive-dozenal-fonts)
+msgid "The separated fonts package for texlive-dozenal"
msgstr ""
-#. summary(texlive-recycle)
-msgid "A font providing the \"recyclable\" logo"
+#. summary(texlive-specs-g:texlive-dpfloat)
+msgid "Support for double-page floats"
msgstr ""
-#. description(texlive-phaistos)
+#. description(texlive-specs-g:texlive-dpfloat)
msgid ""
-"A font that contains all the symbols of the famous Disc of Phaistos, together with a LaTeX package. The disc was 'printed' by stamping the wet clay with some sort of punches, probably around 1700 BCE. The font is available in Adobe Type 1 and OpenType formats (the latter using the Unicode positions for the symbols). There are those who believe that this Cretan script was used to 'write' Greek (it is known, for example, that the rather later Cretan Linear B script was used to write Greek), but arguments for other languages have been presented.\n"
+"Provides fullpage and leftfullpage environments, that may be used inside a figure, table, or other float environment. If the first of a 2-page spread uses a \"leftfullpage\" environment, the float will only be typeset on an even-numbered page, and the two floats will appear side-by-side in a two-sided document.\n"
"\n"
-"date: 2008-07-09 10:34:16 +0000"
+"date: 2012-05-15 14:59:15 +0000"
msgstr ""
-#. summary(texlive-prodint)
-msgid "A font that provides the product integral symbol"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dpfloat-doc)
+#, fuzzy
+msgid "Documentation for texlive-dpfloat"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-skull)
-msgid "A font to draw a skull"
-msgstr ""
+#. description(texlive-specs-g:texlive-dpfloat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dpfloat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-philokalia)
-msgid "A font to typeset the Philokalia Books"
+#. summary(texlive-specs-g:texlive-dprogress)
+msgid "LaTeX-relevant log information for debugging"
msgstr ""
-#. description(texlive-makeindex)
+#. description(texlive-specs-g:texlive-dprogress)
msgid ""
-"A general purpose hierarchical index generator; it accepts one or more input files (often produced by a text formatter such as TeX or troff), sorts the entries, and produces an output file which can be formatted. The formats of the input and output files are specified in a style file; by default, input is assumed to be an .idx file, as generated by LaTeX.\n"
+"The package logs LaTeX's progress through the file, making the LaTeX output more verbose. This helps to make LaTeX debugging easier, as it is simpler to find where exactly LaTeX failed. The package outputs the typesetting of section, subsection and subsubsection headers and (if amsmath is loaded) details of the align environment.\n"
"\n"
-"date: 2011-09-24 07:40:13 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tkirc)
-msgid "A graphical IRC client"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dprogress-doc)
+#, fuzzy
+msgid "Documentation for texlive-dprogress"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lualatex-doc)
-msgid "A guide to use of LaTeX with LuaTeX"
-msgstr ""
+#. description(texlive-specs-g:texlive-dprogress-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dprogress"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-timetable)
-msgid ""
-"A highly-configurable package, with nice output and simple input. The macros use a radix sort mechanism so that the order of input is not critical.\n"
-"\n"
-"date: 2008-09-11 13:08:12 +0000"
+#. summary(texlive-specs-g:texlive-drac)
+msgid "Declare active character substitution, robustly"
msgstr ""
-#. description(texlive-koma-script-sfs)
+#. description(texlive-specs-g:texlive-drac)
msgid ""
-"A koma-script parameter set for letters on A4 paper, complying with Finnish standards SFS 2486, 2487 and 2488; suitable for window envelopes with window on the left size in the sizes C5, C65, E5 and E65 (although, because the address window is smaller, for sizes E5 and E65 the address may not fit within the window, but ordinary 3-line address should fit).\n"
+"The package provides macros \\DeclareRobustActChar and \\ReDeclareRobActChar. One uses \\DeclareRobustActChar in the same way one would use \\DeclareRobustCommand; the macro \\protects the active character when it appears in a moving argument. \\ReDeclareRobActChar redefines an active character previously defined with \\DeclareRobustActChar, in the same way that \\renewcommand works for ordinary commands.\n"
"\n"
-"date: 2008-11-15 09:53:47 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mongolian-babel)
-msgid "A language definition file for Mongolian in Babel"
+#. summary(texlive-specs-g:texlive-drac-doc)
+#, fuzzy
+msgid "Documentation for texlive-drac"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-drac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-drac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-draftcopy)
+msgid "Identify draft copies"
msgstr ""
-#. description(texlive-picinpar)
+#. description(texlive-specs-g:texlive-draftcopy)
msgid ""
-"A legacy package for creating 'windows' in paragraphs, for inserting graphics, etc. (including \"dropped capitals\"). Users should note that Piet van Oostrum (in a published review of packages of this sort) does not recommend this package; Picins is recommended instead.\n"
+"Places the word DRAFT (or other words) in light grey diagonally across the background (or at the bottom) of each (or selected) pages of the document. The package uses PostScript \\special commands, and may not therefore be used with PDFLaTeX. For that usage, consider the wallpaper or draftwatermark packages.\n"
"\n"
-"date: 2010-11-05 11:43:21 +0000"
+"date: 2011-09-30 18:51:09 +0000"
msgstr ""
-#. summary(texlive-tikz-dependency)
+#. summary(texlive-specs-g:texlive-draftcopy-doc)
#, fuzzy
-msgid "A library for drawing dependency graphs"
-msgstr "Knihovna pro jazyk C pro syntaktickou analýzu parametrů z příkazového řádku"
+msgid "Documentation for texlive-draftcopy"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-keyval2e)
-msgid "A lightweight and robust key-value parser"
-msgstr ""
-
-#. summary(texlive-macros2e)
+#. description(texlive-specs-g:texlive-draftcopy-doc)
#, fuzzy
-#| msgid "A list of internet service providers"
-msgid "A list of internal LaTeX2e macros"
-msgstr "Seznam poskytovatelů Internetu"
+msgid "This package includes the documentation for texlive-draftcopy"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-plain-doc)
-msgid "A list of plain.tex cs names"
+#. summary(texlive-specs-g:texlive-draftwatermark)
+msgid "Put a grey textual watermark on document pages"
msgstr ""
-#. summary(texlive-mycv)
-msgid "A list-driven CV class, allowing TikZ decorations"
+#. description(texlive-specs-g:texlive-draftwatermark)
+msgid ""
+"The package provides a means to add a textual, light grey watermark on every page or on the first page of a document. Typical usage may consist in writing words such as DRAFT or CONFIDENTIAL across document pages. The package performs a similar function to that of draftcopy, but its implementation is output device independent, and very made simple by relying on everpage.\n"
+"\n"
+"date: 2012-05-15 14:59:15 +0000"
msgstr ""
-#. summary(withlock)
-msgid "A locking wrapper script"
-msgstr ""
+#. summary(texlive-specs-g:texlive-draftwatermark-doc)
+#, fuzzy
+msgid "Documentation for texlive-draftwatermark"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multido)
-msgid "A loop facility for Generic TeX"
-msgstr ""
+#. description(texlive-specs-g:texlive-draftwatermark-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-draftwatermark"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ledmac)
-msgid ""
-"A macro package for typesetting scholarly critical editions. The ledmac package is a LaTeX port of the plain TeX EDMAC macros. It supports indexing by page and line number and simple tabular- and array-style environments. The package is distributed with the related ledpar and ledarab packages. The package is now superseded by eledmac.\n"
-"\n"
-"date: 2012-09-17 10:04:36 +0000"
+#. summary(texlive-specs-g:texlive-dramatist)
+msgid "Typeset dramas, both in verse and in prose"
msgstr ""
-#. description(texlive-rlepsf)
+#. description(texlive-specs-g:texlive-dramatist)
msgid ""
-"A macro package for use with epsf.tex which allows PostScript labels in an Encapsulated PostScript file to be replaced by TeX labels. The package provides commands \\relabel (simply replace a PostScript string), \\adjustrelabel (replace a PostScript string, with position adjustment), and \\extralabel (add a label at given coordinates). You can, if you so choose, use the facilities of the labelfig package in place of using \\extralabel.\n"
+"This package is intended for typesetting drama of any length. It provides two environments for typesetting dialogues in prose or in verse; new document divisions corresponding to acts and scenes; macros that control the appearance of characters and stage directions; and automatic generation of a `dramatis personae' list.\n"
"\n"
-"date: 2007-01-13 22:45:25 +0000"
+"date: 2012-05-15 14:59:15 +0000"
msgstr ""
-#. summary(texlive-shapepar)
-msgid "A macro to typeset paragraphs in specific shapes"
+#. summary(texlive-specs-g:texlive-dramatist-doc)
+#, fuzzy
+msgid "Documentation for texlive-dramatist"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-g:texlive-dramatist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dramatist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dratex)
+msgid "General drawing macros"
msgstr ""
-#. summary(texlive-tamethebeast)
-msgid "A manual about bibliographies and especially BibTeX"
+#. description(texlive-specs-g:texlive-dratex)
+msgid ""
+"A low level (DraTex.sty) and a high-level (AlDraTex.sty) drawing package written entirely in TeX.\n"
+"\n"
+"date: 2012-05-07 20:13:48 +0000"
msgstr ""
-#. description(tkman)
-msgid "A manual browser for X with hyperlinks, history, and more."
-msgstr "Prohlížeč manuálových stránek pro X s hypertextovými odkazy, historií apod.."
+#. summary(texlive-specs-g:texlive-dratex-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-dratex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rsfso)
-msgid "A mathematical calligraphic font based on rsfs"
-msgstr ""
+#. description(texlive-specs-g:texlive-dratex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dratex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-moderncv)
-msgid "A modern curriculum vitae class"
+#. summary(texlive-specs-g:texlive-drawstack)
+msgid "Draw execution stacks"
msgstr ""
-#. description(texlive-postcards)
+#. description(texlive-specs-g:texlive-drawstack)
msgid ""
-"A modification of the standard LaTeX letter class which prints multiple, pre-stamped, 5.5\" by 3.5\" postcards (a US standard size) via the envlab and mailing packages. An address database is employed to address the front side of each postcard and a message is printed on the back side of all. An illustrative example is provided.\n"
+"This simple LaTeX package provides support for drawing execution stack (typically to illustrate assembly language notions). The code is written on top of TikZ.\n"
"\n"
-"date: 2009-01-23 14:11:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ucthesis)
+#. summary(texlive-specs-g:texlive-drawstack-doc)
+#, fuzzy
+msgid "Documentation for texlive-drawstack"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-drawstack-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-drawstack"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-droid)
+msgid "LaTeX support for the Droid font families"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-droid)
msgid ""
-"A modified version of the standard LaTeX report style that is accepted for use with University of California PhD dissertations and Masters theses. A sample dissertation source and bibliography are provided.\n"
+"The Droid typeface family was designed in the fall of 2006 by Steve Matteson, as a commission from Google to create a set of system fonts for its Android platform. The goal was to provide optimal quality and comfort on a mobile handset when rendered in application menus, web browsers and for other screen text. The Droid family consists of Droid Serif, Droid Sans and Droid Sans Mono fonts, licensed under the Apache License Version 2.0. The bundle includes the fonts in both TrueType and Adobe Type 1 formats. The package does not support the Droid Pro family of fonts, available for purchase from the Ascender foundry.\n"
"\n"
-"date: 2009-09-27 09:52:43 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-inconsolata)
-msgid "A monospaced font, with support files for use with TeX"
-msgstr ""
+#. summary(texlive-specs-g:texlive-droid-doc)
+#, fuzzy
+msgid "Documentation for texlive-droid"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-supertabular)
-msgid "A multi-page tables package"
+#. description(texlive-specs-g:texlive-droid-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-droid"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-droid-fonts)
+msgid "Severed fonts for texlive-droid"
msgstr ""
-#. summary(texlive-lhcyr)
-msgid "A non-standard Cyrillic input scheme"
+#. description(texlive-specs-g:texlive-droid-fonts)
+msgid "The separated fonts package for texlive-droid"
msgstr ""
-#. description(texlive-othello)
-msgid ""
-"A package (based on Kolodziejska's go), and fonts (as MetaFont source) are provided.\n"
-"\n"
-"date: 2007-01-12 14:52:44 +0000"
+#. summary(texlive-specs-g:texlive-droit-fr)
+msgid "Document class and bibliographic style for French law"
msgstr ""
-#. description(texlive-rotating)
+#. description(texlive-specs-g:texlive-droit-fr)
msgid ""
-"A package built on the standard LaTeX graphics package to perform all the different sorts of rotation one might like, including complete figures and tables with their captions. If you want continuous text (i.e., more than one page) set in landscape mode, use the lscape package instead. The rotating packages only deals in rotated boxes (or floats, which are themselves boxes), and boxes always stay on one page. If you need to use the facilities of the float in the same document, load rotating.sty via rotfloat, which smooths the path between the rotating and float packages.\n"
+"The bundle provides a toolkit intended for students writing a thesis in French law. It features: a LaTeX document class; a bibliographic style for Biblatex package; a practical example of french thesis document; and documentation. The class assumes use of biber and biblatex.\n"
"\n"
-"date: 2010-01-26 13:36:34 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-statex)
-msgid ""
-"A package defining many macros for items of significance in statistical presentations. An updated, but incompatible, version of the package is available: statex2.\n"
-"\n"
-"date: 2010-11-03 10:47:38 +0000"
+#. summary(texlive-specs-g:texlive-droit-fr-doc)
+#, fuzzy
+msgid "Documentation for texlive-droit-fr"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-droit-fr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-droit-fr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-drs)
+msgid "Typeset Discourse Representation Structures (DRS)"
msgstr ""
-#. description(texlive-toolbox)
+#. description(texlive-specs-g:texlive-drs)
msgid ""
-"A package for (La)TeX which provides some macros which are convenient for writing indices, glossaries, or other macros. It contains macros which support: implicit macros; fancy optional arguments; loops over tokenlists and itemlists; searching and splitting; controlled expansion; redefinition of macros; and concatenated macro names; macros for text replacement.\n"
+"The package draws Discourse Representation Structures (DRSs). It can draw embedded DRSs, if-then conditions and quantificational \"duplex conditions\" (with a properly scaled connecting diamond). Formatting parameters allow the user to control the appearance and placement of DRSs, and of DRS variables and conditions. The package is based on DRS macros in the covington package.\n"
"\n"
-"date: 2008-02-29 18:54:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-rtklage)
-msgid "A package for German lawyers"
-msgstr ""
+#. summary(texlive-specs-g:texlive-drs-doc)
+#, fuzzy
+msgid "Documentation for texlive-drs"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-msg)
+#. description(texlive-specs-g:texlive-drs-doc)
#, fuzzy
-msgid "A package for LaTeX localisation"
-msgstr "Prohlížeč prezentací z OpenOffice.org a KOffice"
+msgid "This package includes the documentation for texlive-drs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-showdim)
-msgid ""
-"A package for LaTeX providing a number of commands for printing the value of a TeX dimension. For example, \\tenthpt{\\baselineskip} yields the current value of \\baselineskip rounded to the nearest tenth of a point.\n"
-"\n"
-"date: 2012-12-19 16:06:30 +0000"
+#. summary(texlive-specs-g:texlive-drv)
+msgid "Derivation trees with MetaPost"
msgstr ""
-#. description(texlive-mceinleger)
+#. description(texlive-specs-g:texlive-drv)
msgid ""
-"A package for creating MC-covers on your own. It allows the creation of simple covers as well as covers with an additional page for more information about the cassette (table of contents e.g.). The rotating package is required.\n"
+"A set of MetaPost macros for typesetting derivation trees (such as used in sequent calculus, type inference, programming language semantics...). No MetaPost knowledge is needed to use these macros.\n"
"\n"
-"date: 2007-01-09 21:36:10 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-quotchap)
+#. summary(texlive-specs-g:texlive-drv-doc)
+#, fuzzy
+msgid "Documentation for texlive-drv"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-drv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-drv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dtk)
+#, fuzzy
+#| msgid "Documentation for the International Fonts"
+msgid "Document class for the journal of DANTE"
+msgstr "Dokumentace k mezinárodním fontům"
+
+#. description(texlive-specs-g:texlive-dtk)
msgid ""
-"A package for creating decorative chapter headings with quotations. Uses graphical and coloured output and by default needs the \"Adobe standard font set\" (as supported by psnfss).\n"
+"The bundle provides a class and style file for typesetting \"Die TeXnische Komodie\" -- the communications of the German TeX Users Group DANTE e.V. The arrangement means that the class may be used by article writers to typeset a single article as well as to produce the complete journal.\n"
"\n"
-"date: 2012-10-20 20:28:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mpattern)
-msgid ""
-"A package for defining and using patterns in MetaPost, using the Pattern Color Space available in PostScript Level 2.\n"
-"\n"
-"date: 2006-12-15 21:34:26 +0000"
+#. summary(texlive-specs-g:texlive-dtk-doc)
+#, fuzzy
+msgid "Documentation for texlive-dtk"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dtk-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dtk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dtl)
+msgid "Tools to dis-assemble and re-assemble DVI files"
msgstr ""
-#. description(texlive-pst-optic)
+#. description(texlive-specs-g:texlive-dtl)
msgid ""
-"A package for drawing both reflective and refractive optics diagrams. The package requires pstricks later than version 1.10.\n"
+"DTL (DVI Text Language) is a means of expressing the content of a DVI file, which is readily readable by humans. The DTL bundle contains an assembler dt2dv (which produces DVI files from DTL files) and a disassembler dv2dt (which produces DTL files from DVI files). The DTL bundle was developed so as to avoid some infelicities of dvitype (among other pressing reasons).\n"
"\n"
-"date: 2010-07-29 14:44:20 +0000"
+"date: 2012-04-09 20:37:34 +0000"
msgstr ""
-#. summary(texlive-miniplot)
-msgid "A package for easy figure arrangement"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dtxgallery)
+#, fuzzy
+msgid "A small collection of minimal DTX examples"
+msgstr "Volitelné jmf úlohy pro ant"
-#. description(texlive-svninfo)
+#. description(texlive-specs-g:texlive-dtxgallery)
msgid ""
-"A package for incorporating the values of Subversion keywords into typeset documents. Information about Subversion (a replacement for CVS) is available from http://subversion.tigris.org/\n"
+"A collection of files that demonstrate simple things that are possible with the flexible and under-appreciated docstrip file format. Each file of the collection is provided as a .dtx file and as the corresponding .pdf. The set is intended as a companion to Scott Pakin's excellent and influential dtxtut example of producing LaTeX packages in this way.\n"
"\n"
-"date: 2010-03-23 20:34:59 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-imakeidx)
-msgid "A package for producing multiple indexes"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dtxgallery-doc)
+#, fuzzy
+msgid "Documentation for texlive-dtxgallery"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-permute)
-msgid ""
-"A package for symmetric groups, allowing you to input, output, and calculate with them.\n"
-"\n"
-"date: 2007-01-12 22:55:10 +0000"
+#. description(texlive-specs-g:texlive-dtxgallery-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dtxgallery"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dtxgen)
+msgid "Creates a template for a self-extracting .dtx file"
msgstr ""
-#. description(texlive-youngtab)
+#. description(texlive-specs-g:texlive-dtxgen)
msgid ""
-"A package for typesetting Young-Tableaux, mathematical symbols for the representations of groups, providing two macros, \\yng(1) and \\young(1) to generate the whole Young-Tableaux.\n"
+"The bash script dtxgen creates a template for a self-extracting .dtx file. It is useful for those who plan to create a new Documented LaTeX Source (.dtx) file.\n"
"\n"
-"date: 2010-03-30 12:47:00 +0000"
+"date: 2014-04-25 11:42:50 +0000"
msgstr ""
-#. summary(texlive-isotope)
-msgid "A package for typesetting isotopes"
+#. summary(texlive-specs-g:texlive-dtxgen-doc)
+#, fuzzy
+msgid "Documentation for texlive-dtxgen"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dtxgen-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dtxgen"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dtxtut)
+msgid "Tutorial on writing .dtx and .ins files"
msgstr ""
-#. description(texlive-trfsigns)
+#. description(texlive-specs-g:texlive-dtxtut)
msgid ""
-"A package for typesetting various transformation signs for Laplace transforms, Fourier transforms and others.\n"
+"This tutorial is intended for advanced LaTeX2e users who want to learn how to create .ins and .dtx files for distributing their homebrewed classes and package files.\n"
"\n"
-"date: 2006-12-04 23:47:24 +0000"
+"date: 2012-06-15 12:27:55 +0000"
msgstr ""
-#. description(texlive-moresize)
-msgid ""
-"A package for using font sizes up to 35.88pt, for example with the EC fonts. New commands \\HUGE and \\ssmall for selecting font sizes are provided together with some options working around current LaTeX2e shortcomings in using big font sizes. The package also provides options for improving the typesetting of paragraphs (or headlines) with embedded math expressions at font sizes above 17.28pt.\n"
-"\n"
-"date: 2010-03-20 18:23:31 +0000"
+#. summary(texlive-specs-g:texlive-duerer)
+msgid "Computer Duerer fonts"
msgstr ""
-#. description(texlive-memexsupp)
+#. description(texlive-specs-g:texlive-duerer)
msgid ""
-"A package of code proposed as supporting material for memoir. The package is intended as a test bed for such code, which may in the fullness of time be adopted into the main memoir release.\n"
+"These fonts are designed for titling use, and consist of capital roman letters only. Together with the normal set of base shapes, the family also offers an informal shape. The distribution is as Metafont source. LaTeX support is available in the duerer-latex bundle.\n"
"\n"
-"date: 2008-08-22 13:19:59 +0000"
+"date: 2014-04-25 19:03:35 +0000"
msgstr ""
-#. description(texlive-titlesec)
-msgid ""
-"A package providing an interface to sectioning commands for selection from various title styles. E.g., marginal titles and to change the font of all headings with a single command, also providing simple one-step page styles. Also includes a package to change the page styles when there are floats in a page. You may assign headers/footers to individual floats, too.\n"
-"\n"
-"date: 2011-12-15 14:36:45 +0000"
+#. summary(texlive-specs-g:texlive-duerer-doc)
+#, fuzzy
+msgid "Documentation for texlive-duerer"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-duerer-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-duerer"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-duerer-latex)
+msgid "LaTeX support for the Duerer fonts"
msgstr ""
-#. description(texlive-sauterfonts)
+#. description(texlive-specs-g:texlive-duerer-latex)
msgid ""
-"A package providing font definition files (plus a replacement for the package exscale) to access many of the fonts in Sauter's collection. These fonts are available in all point sizes and look nicer for such \"intermediate\" document sizes as 11pt. Also included is the package sbbm, an alternative to access the bbm fonts, a nice collection of blackboard bold symbols.\n"
+"LaTeX support for Hoenig's Computer Duerer fonts, using their standard fontname names.\n"
"\n"
-"date: 2007-01-14 09:43:12 +0000"
+"date: 2012-05-07 20:13:48 +0000"
msgstr ""
-#. description(texlive-shorttoc)
-msgid ""
-"A package to create another table of contents with a different depth, useful in large documents where a detailed table of contents should be accompanied by a shorter one, giving only a general overview of the main topics in the document.\n"
-"\n"
-"date: 2006-11-06 11:20:58 +0000"
+#. summary(texlive-specs-g:texlive-duerer-latex-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-duerer-latex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-duerer-latex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-duerer-latex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-duotenzor)
+msgid "Drawing package for circuit and duotensor diagrams"
msgstr ""
-#. description(texlive-rcsinfo)
+#. description(texlive-specs-g:texlive-duotenzor)
msgid ""
-"A package to extract RCS (Revision Control System) information and use it in a LaTeX document. For users of LaTeX2HTML rcsinfo.perl is included.\n"
+"This is a drawing package for circuit and duotensor diagrams within LaTeX documents. It consists of about eighty commands, calling on TikZ for support.\n"
"\n"
-"date: 2007-01-06 09:07:33 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-textpos)
+#. summary(texlive-specs-g:texlive-duotenzor-doc)
+#, fuzzy
+msgid "Documentation for texlive-duotenzor"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-duotenzor-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-duotenzor"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dutchcal)
+msgid "A reworking of ESSTIX13, adding a bold version"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-dutchcal)
msgid ""
-"A package to facilitate placement of boxes at absolute positions on the LaTeX page. There are several reasons why this might be useful, an important one being to help the creation of large-format conference posters.\n"
+"This package reworks the mathematical calligraphic font ESSTIX13, adding a bold version. LaTeX support files are included. The new fonts may also be accessed from the most recent version of mathalfa. The fonts themselves are subject to the SIL OPEN FONT LICENSE, version 1.1.\n"
"\n"
-"date: 2012-06-01 17:23:46 +0000"
+"date: 2014-04-25 19:03:35 +0000"
msgstr ""
-#. summary(texlive-technics)
-msgid "A package to format technical documents"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dutchcal-doc)
+#, fuzzy
+msgid "Documentation for texlive-dutchcal"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rmpage)
-msgid "A package to help change page layout parameters in LaTeX"
-msgstr ""
+#. description(texlive-specs-g:texlive-dutchcal-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dutchcal"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-layaureo)
-msgid "A package to improve the A4 page layout"
+#. summary(texlive-specs-g:texlive-dutchcal-fonts)
+msgid "Severed fonts for texlive-dutchcal"
msgstr ""
-#. description(texlive-scale)
-msgid ""
-"A package to scale a document by sqrt(2) (or by \\magstep{2}). This is useful if you are preparing a document on, for example, A5 paper and want to print on A4 paper to achieve a better resolution.\n"
-"\n"
-"date: 2006-11-06 11:20:58 +0000"
+#. description(texlive-specs-g:texlive-dutchcal-fonts)
+msgid "The separated fonts package for texlive-dutchcal"
msgstr ""
-#. description(texlive-synttree)
-msgid ""
-"A package to typeset syntactic trees such as those used in Chomsky's Generative grammar, based on a description of the structure of the tree.\n"
-"\n"
-"date: 2009-11-30 08:23:31 +0000"
+#. summary(texlive-specs-g:texlive-dvdcoll)
+msgid "A class for typesetting DVD archives"
msgstr ""
-#. description(texlive-pst-3dplot)
+#. description(texlive-specs-g:texlive-dvdcoll)
msgid ""
-"A package using PSTricks to draw a large variety of graphs and plots, including 3D maths functions. Data can be read from external data files, making this package a generic tool for graphing within TeX/LaTeX, without the need for external tools.\n"
+"Having lost the overview of my DVD archives, I simply could not remember if I already recorded the documentary running on TV that day. I chose to recreate the index using LaTeX: the design aim was a hyperlinked and fully searchable PDF-document, listing my DVDs with all titles, lengths and so on. Further requirements were support for seasons of tv series and a list with all faulty or missing programs for rerecording. The dvdcoll class supports all these requirements. dvdcoll.cls follows the structure <number><title><length>. As a result, the class is not limited to DVDs--you can of course typeset archives of CD-ROMs, Audio-CDs and so on. Supported languages at the moment: English, French, German, Italian, Polish, Portuguese, Spanish. Some help is needed for other languages!\n"
"\n"
-"date: 2012-06-07 12:36:18 +0000"
+"date: 2012-06-15 12:27:55 +0000"
msgstr ""
-#. description(texlive-pst-fr3d)
-msgid ""
-"A package using PSTricks to draw three dimensional framed boxes using a macro \\PstFrameBoxThreeD. The macro is especially useful for drawing 3d-seeming buttons.\n"
-"\n"
-"date: 2007-02-27 23:07:21 +0000"
+#. summary(texlive-specs-g:texlive-dvdcoll-doc)
+#, fuzzy
+msgid "Documentation for texlive-dvdcoll"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dvdcoll-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dvdcoll"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dvgloss)
+msgid "Facilities for setting interlinear glossed text"
msgstr ""
-#. description(texlive-tensor)
+#. description(texlive-specs-g:texlive-dvgloss)
msgid ""
-"A package which allows the user to set tensor-style super- and subscripts with offsets between successive indices. It supports the typesetting of tensors with mixed upper and lower indices with spacing, also typset preposed indices. This is a complete revision and extension of the original 'tensor' package by Mike Piff.\n"
+"The package provides extensible macros for setting interlinear glossed text -- useful, for instance, for typing linguistics papers. The operative word here is \"extensible\": few features are built in, but some flexible and powerful facilities are included for adding your own.\n"
"\n"
-"date: 2006-11-03 06:18:50 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-texments)
+#. summary(texlive-specs-g:texlive-dvgloss-doc)
+#, fuzzy
+msgid "Documentation for texlive-dvgloss"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dvgloss-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dvgloss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dviasm)
+#, fuzzy
+#| msgid "A utility for configuring serial ports"
+msgid "A utility for editing DVI files"
+msgstr "Nástroje pro konfiguraci sériových portů"
+
+#. description(texlive-specs-g:texlive-dviasm)
msgid ""
-"A package which allows to use the Pygments highlighter inside LaTeX documents. Pygments supports syntax colouring of over 50 types of files, and ships with multiple colour schemes.\n"
+"A Python script to support changing or creating DVI files via disassembling into text, editing, and then reassembling into binary format. It supports advanced features such as adding a preprint number or watermarks.\n"
"\n"
-"date: 2009-01-03 09:55:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mathcomp)
-msgid ""
-"A package which provides access to some interesting characters of the Text Companion fonts (TS1 encoding) in maths mode.\n"
-"\n"
-"date: 2007-01-09 17:22:13 +0000"
+#. summary(texlive-specs-g:texlive-dvicopy)
+msgid "Copy DVI files, flattening VFs"
msgstr ""
-#. description(texlive-paper)
+#. description(texlive-specs-g:texlive-dvicopy)
msgid ""
-"A pair of classes derived from article, tuned for producing papers for journals. The classes introduce new layout options and font commands for sections/parts, and define a new keywords environment, subtitle and institution commands for the title section and new commands for revisions.\n"
+"DVICOPY is a utility program that allows one to take a DVI file that references composite fonts (VF) and convert it into a DVI file that does not contain such references. It also serves as a basis for writing DVI drivers (much like DVItype).\n"
"\n"
-"date: 2012-01-13 08:08:17 +0000"
+"date: 2012-04-10 13:00:16 +0000"
msgstr ""
-#. description(texlive-xetexfontinfo)
+#. summary(texlive-specs-g:texlive-dvidvi)
+#, fuzzy
+#| msgid "Converts File Names from One Encoding to Another"
+msgid "Convert one DVI file into another"
+msgstr "Převod kódování jmen souborů"
+
+#. description(texlive-specs-g:texlive-dvidvi)
msgid ""
-"A pair of documents to reveal the font features supported by fonts usable in XeTeX. Use OpenType-info.tex for OpenType fonts, and AAT-info.tex for AAT fonts (Mac OS X only).\n"
+"The output DVI file's contents are specified by page selection commands; series of pages and page number ranges may be specified, as well as inclusions and exclusions.\n"
"\n"
-"date: 2008-08-23 22:31:24 +0000"
+"date: 2012-05-07 16:30:58 +0000"
msgstr ""
-#. summary(texlive-mxedruli)
-msgid "A pair of fonts for different Georgian alphabets"
+#. summary(texlive-specs-g:texlive-dviincl)
+msgid "Include a DVI page into MetaPost output"
msgstr ""
-#. description(texlive-ltabptch)
+#. description(texlive-specs-g:texlive-dviincl)
msgid ""
-"A patch for LaTeX bugs tools/3180 and tools/3480. The patch applies to version 4.11 of longtable.\n"
+"DVItoMP is one of the auxiliary programs available to any MetaPost package; it converts a DVI file into a MetaPost file. Using it, one can envisage including a DVI page into an EPS files generated by MetaPost. Such files allow pages to include other pages.\n"
"\n"
-"date: 2010-03-07 15:35:25 +0000"
+"date: 2012-04-10 13:00:16 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-NERDcommenter)
-msgid "A plugin that allows for easy commenting of code for many filetypes"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dviincl-doc)
+#, fuzzy
+msgid "Documentation for texlive-dviincl"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-m-tx)
+#. description(texlive-specs-g:texlive-dviincl-doc)
#, fuzzy
-#| msgid "TeX Processor for OpenJade"
-msgid "A preprocessor for pmx"
-msgstr "TeXový procesor pro OpenJade"
+msgid "This package includes the documentation for texlive-dviincl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-powerdot)
-msgid "A presentation class"
+#. summary(texlive-specs-g:texlive-dviljk)
+msgid "DVI to Laserjet output"
msgstr ""
-#. description(texlive-perception)
+#. description(texlive-specs-g:texlive-dviljk)
msgid ""
-"A product of custom-bib, provided simply to save others' time.\n"
+"A dvi driver for the LaserJet printers, using kpathsea recursive file searching. Note: this program will not compile simply with the sources in this distribution; it needs a full (current) kpathsea distribution environment, such as is available from the TeX-Live source tree.\n"
"\n"
-"date: 2007-02-24 14:09:57 +0000"
+"date: 2012-04-21 07:41:15 +0000"
msgstr ""
-#. description(virtaal)
+#. summary(texlive-specs-g:texlive-dvipdfmx)
+#, fuzzy
+#| msgid "An extended plain TeX version (not NTS)"
+msgid "An extended version of dvipdfm"
+msgstr "Rozšíření obyčejného TeXu (ne NTS)"
+
+#. description(texlive-specs-g:texlive-dvipdfmx)
msgid ""
-"A program for Computer Aided Translation (CAT) and localization.\n"
+"Dvipdfmx (formerly dvipdfm-cjk) is a development of dvipdfm created to support multi-byte character encodings and large character sets for East Asian languages. Dvipdfmx, if \"called\" with the name dvipdfm, operates in a \"dvipdfm compatibility\" mode, so that users of the both packages need only keep one executable. A secondary design goal is to support as many \"PDF\" features as does pdfTeX. There being no documentation as such, users are advised to consult the documentation of dvipdfm (as well, of course, as the package Readme.\n"
"\n"
-"Virtaal includes features that allow a localizer to work effectively including: syntax highlighting, autocomplete and autocorrect. By showing only the data that is needed through its simple and effective user interface it ensures that translators can focus on their current translation task.\n"
-"\n"
-"A rich set of Translation Memory (TM) plugins provide valuable suggestions to the translator from sources such as Open-Tran.eu, the current file, and the translators own TM server. Similarly Machine Translation (MT) suggestions can come from Apertium, libtranslate, Google and Moses.\n"
-"\n"
-"The terminology plugin system will provide terminology hints from Open-Tran.eu, local terminology files and remote terminology repositories.\n"
-"\n"
-"Placeholders such as variables, abbreviations, URLs, emails and special punctutions are highlighted for easy insertion into the translations.\n"
-"\n"
-"Virtaal is able to edit any of the following formats: XLIFF, Gettext PO and .mo, Qt .ts, .qph and .qm, Wordfast TM, TMX, OmegaT glossaries and TBX. The Translate Toolkit converters allow translators to edit: OpenDocument Format (ODF), OpenOffice.org SDF, Java (and Mozilla) .properties, Mozilla DTD files, subtitles, and other formats."
+"date: 2013-09-22 07:06:20 +0000"
msgstr ""
-#. summary(texlive-psfragx)
-msgid "A psfrag eXtension"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dvipdfmx-def)
+#, fuzzy
+#| msgid "Configuration Tool for imlib"
+msgid "Configuration file for dvipdfmx graphics"
+msgstr "Konfigurační nástroj pro imlib"
-#. summary(texlive-pst-graphicx)
-msgid "A pstricks-compatible graphicx for use with Plain TeX"
+#. description(texlive-specs-g:texlive-dvipdfmx-def)
+msgid ""
+"This is the graphics driver for use when output is to be processed by dvipdfmx.\n"
+"\n"
+"date: 2014-05-02 16:56:42 +0000"
msgstr ""
-#. summary(texlive-latex-brochure)
+#. summary(texlive-specs-g:texlive-dvipdfmx-doc)
#, fuzzy
-#| msgid "A fast metadata parser for yum"
-msgid "A publicity flyer for LaTeX"
-msgstr "Rychlý analyzátor metadat pro yum"
+msgid "Documentation for texlive-dvipdfmx"
+msgstr "Dokumentace pro adaptx"
-#. summary(vim-plugins:vim-plugin-tselectbuffer)
-msgid "A quick buffer selector/switcher"
+#. description(texlive-specs-g:texlive-dvipdfmx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dvipdfmx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-dvipng)
+#, fuzzy
+#| msgid "A TeX-DVI to ASCII Converter"
+msgid "A fast DVI to PNG/GIF converter"
+msgstr "Konvertor z TeXového DVI do ASCII"
+
+#. description(texlive-specs-g:texlive-dvipng)
+msgid ""
+"This program makes PNG and/or GIF graphics from DVI files as obtained from TeX and its relatives. Its benefits include: Speed. It offers very fast rendering of DVI as bitmap files, which makes it suitable for generating large amounts of images on-the-fly, as needed in preview-latex, WeBWorK and others; It does not read the postamble, so it can be started before TeX finishes. There is a --follow switch that makes dvipng wait at end-of-file for further output, unless it finds the POST marker that indicates the end of the DVI; Interactive query of options. dvipng can read options interactively through stdin, and all options are usable. It is even possible to change the input file through this interface. Support for PK, VF, PostScript Type1, and TrueType fonts, colour specials, and inclusion of PostScript, PNG, JPEG or GIF images.\n"
+"\n"
+"date: 2013-12-16 19:22:01 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-tselectfiles)
-msgid "A quick file selector/browser/explorer"
+#. summary(texlive-specs-g:texlive-dvipos)
+msgid "Package dvipos"
+msgstr "Balíček dvipos"
+
+#. description(texlive-specs-g:texlive-dvipos)
+msgid "The dvipos package"
msgstr ""
-#. description(texlive-ukrhyph)
+#. summary(texlive-specs-g:texlive-dvips)
+msgid "A DVI to PostScript driver"
+msgstr "Ovladač DVI na PostScript"
+
+#. description(texlive-specs-g:texlive-dvips)
msgid ""
-"A range of patterns, depending on the encoding of the output font (including the standard T2A, so one can use the patterns with free fonts).\n"
+"This package has been withdrawn from CTAN, and bundled into the distributions' package sets. The current sources of dvips may be found in the distribution of dvipsk which forms part of the TeX-live sources.\n"
"\n"
-"date: 2007-01-18 23:08:42 +0000"
+"date: 2013-03-25 11:41:24 +0000"
msgstr ""
-#. summary(texlive-subsupscripts)
-msgid "A range of sub- and superscript commands"
-msgstr ""
+#. summary(texlive-specs-g:texlive-dvips-doc)
+#, fuzzy
+msgid "Documentation for texlive-dvips"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xfor)
+#. description(texlive-specs-g:texlive-dvips-doc)
#, fuzzy
-msgid "A reimplimentation of the LaTeX for-loop macro"
-msgstr "Svobodná implementace IEEE 802.1X protokolu"
+msgid "This package includes the documentation for texlive-dvips"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pspicture)
+#. summary(texlive-specs-g:texlive-dvipsconfig)
+#, fuzzy
+msgid "Collection of dvips PostScript headers"
+msgstr "Sbírka volně dostupných arabských písem"
+
+#. description(texlive-specs-g:texlive-dvipsconfig)
msgid ""
-"A replacement for LaTeX's picture macros, that uses PostScript \\special commands. The package is now largely superseded by pict2e.\n"
+"This is a collection of dvips PostScript header and dvips config files. They control certain features of the printer, including: A4, A3, usletter, simplex, duplex / long edge, duplex / short edge, screen frequencies of images, black/white invers, select transparency / paper for tektronix 550/560, manual feeder, envelope feeder, and tray 1, 2 and 3, and printing a PostScript grid underneath the page material--very useful for measuring and eliminating paper feed errors!\n"
"\n"
-"date: 2007-03-11 15:56:01 +0000"
+"date: 2012-05-07 20:19:12 +0000"
msgstr ""
-#. summary(texlive-jvlisting)
+#. summary(texlive-specs-g:texlive-dvisvgm)
#, fuzzy
-#| msgid "Replacement for make and automake"
-msgid "A replacement for LaTeX's verbatim package"
-msgstr "Náhrada make a automake"
+msgid "Convert DVI files to Scalable Vector Graphics format (SVG)"
+msgstr "Rozšíření Perlu pro psaní XML dokumentů"
-#. description(texlive-punk)
+#. description(texlive-specs-g:texlive-dvisvgm)
msgid ""
-"A response to the assertion in a lecture that \"typography tends to lag behind other stylistic changes by about 10 years\". Knuth felt it was (in 1988) time to design a replacement for his designs of the 1970s, and came up with this font! The fonts are distributed as Metafont source. The package offers LaTeX support by Rohit Grover, from an original by Sebastian Rahtz, which is slightly odd in claiming that the fonts are T1- encoded. A (possibly) more rational support package is to be found in punk-latex\n"
+"Dvisvgm is a command line utility that converts TeX DVI files to the XML-based Scalable Vector Graphics (SVG) format. It provides full font support including virtual fonts, font maps, and sub-fonts. If necessary, dvisvgm vectorizes Metafont's bitmap output in order to always create lossless scalable output. The embedded SVG fonts can optionally be replaced with graphics paths so that applications that don't support SVG fonts are enabled to render the graphics properly. Besides many other features, dvisvgm also supports color, emTeX, tpic, PDF mapfile and PostScript specials. Users will need a working TeX installation including the kpathsea library. For more detailed information, see the project page.\n"
"\n"
-"date: 2012-05-30 12:49:05 +0000"
+"date: 2014-04-27 10:29:14 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-latex)
-msgid "A rich set of tools for editing LaTeX"
+#. summary(texlive-specs-g:texlive-dynblocks)
+msgid "A simple way to create dynamic blocks for Beamer"
msgstr ""
-#. summary(texlive-keyreader)
+#. description(texlive-specs-g:texlive-dynblocks)
+msgid ""
+"The package provides full customisation of the aspect and dimensions of blocks inside a presentation.\n"
+"\n"
+"date: 2012-09-27 14:18:28 +0000"
+msgstr ""
+
+#. summary(texlive-specs-g:texlive-dynblocks-doc)
#, fuzzy
-#| msgid "Perl interface to syslog"
-msgid "A robust interface to xkeyval"
-msgstr "Perlové rozhraní pro syslog"
+msgid "Documentation for texlive-dynblocks"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ltxkeys)
+#. description(texlive-specs-g:texlive-dynblocks-doc)
#, fuzzy
-#| msgid "A fast metadata parser for yum"
-msgid "A robust key parser for LaTeX"
-msgstr "Rychlý analyzátor metadat pro yum"
+msgid "This package includes the documentation for texlive-dynblocks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xls2csv)
-msgid "A script that recodes a spreadsheet's charset and saves as CSV"
+#. summary(texlive-specs-g:texlive-dyntree)
+msgid "Construct Dynkin tree diagrams"
msgstr ""
-#. summary(texlive-pst2pdf)
-msgid "A script to compile pstricks documents via pdftex"
+#. description(texlive-specs-g:texlive-dyntree)
+msgid ""
+"The package is intended for users needing to typeset a Dynkin Tree Diagram--a group theoretical construct consisting of cartan coefficients in boxes connected by a series of lines. Such a diagram is a tool for working out the states and their weights in terms of the fundamental weights and the simple roots. The package makes use of the author's coollist package.\n"
+"\n"
+"date: 2012-04-10 15:44:48 +0000"
msgstr ""
-#. description(texlive-varisize)
+#. summary(texlive-specs-g:texlive-dyntree-doc)
+#, fuzzy
+msgid "Documentation for texlive-dyntree"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-dyntree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-dyntree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ean)
+#, fuzzy
+msgid "Macros for making EAN barcodes"
+msgstr "Thajské překlady pro KDE"
+
+#. description(texlive-specs-g:texlive-ean)
msgid ""
-"A series of files, each of which defines a size-change macro. Note that 10point.tex is by convention called by one of the other files, so that there's always a \"way back\".\n"
+"Provides EAN-8 and EAN-13 forms. The package needs the ocr-b fonts; note that the fonts are not available under a free licence, as the macros are.\n"
"\n"
-"date: 2008-11-21 00:34:08 +0000"
+"date: 2012-04-03 16:09:05 +0000"
msgstr ""
-#. summary(texlive-petri-nets)
-msgid "A set TeX/LaTeX packages for drawing Petri nets"
+#. summary(texlive-specs-g:texlive-ean-doc)
+#, fuzzy
+msgid "Documentation for texlive-ean"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-ean-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ean"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ean13isbn)
+msgid "Print EAN13 for ISBN"
msgstr ""
-#. description(texlive-rrgtrees)
+#. description(texlive-specs-g:texlive-ean13isbn)
msgid ""
-"A set of LaTeX macros that makes it easy to produce linguistic tree diagrams suitable for Role and Reference Grammar (RRG). This package allows the construction of trees with crossing lines, as is required by this theory for many languages. There is no known limit on number of tree nodes or levels. Requires the pst-node and pst-tree LaTeX packages.\n"
+"The package provides the means to typeset ISBN codes with EAN- 13; it uses the (generic) package ean13.tex to typeset the actual barcode.\n"
"\n"
-"date: 2012-02-10 17:28:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pmgraph)
+#. summary(texlive-specs-g:texlive-ean13isbn-doc)
+#, fuzzy
+msgid "Documentation for texlive-ean13isbn"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-ean13isbn-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ean13isbn"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-easy)
+#, fuzzy
+msgid "A collection of easy-to-use macros"
+msgstr "Kolekce užitečných knihoven pro hry"
+
+#. description(texlive-specs-g:texlive-easy)
msgid ""
-"A set of extensions to LaTeX picture environment, including a wider range of vectors, and a lot more box frame styles.\n"
+"The collection comprises: easybib, support for customising bibliographies; easybmat, support for composing block matrices; easyeqn, support for various aspects of equations; easymat, support for composing matrices; easytable, support for writing tables; easyvector, a C-like syntax for writing vectors.\n"
"\n"
-"date: 2008-11-04 07:05:43 +0000"
+"date: 2013-12-17 16:06:14 +0000"
msgstr ""
-#. description(texlive-imac)
-msgid ""
-"A set of files for producing correctly formatted documents for the International Modal Analysis Conference. The bundle provides a LaTeX package and a BibTeX style file.\n"
-"\n"
-"date: 2010-03-06 16:30:22 +0000"
+#. summary(texlive-specs-g:texlive-easy-doc)
+#, fuzzy
+msgid "Documentation for texlive-easy"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-easy-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-easy"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-easy-todo)
+msgid "To-do notes in a document"
msgstr ""
-#. description(texlive-txfontsb)
+#. description(texlive-specs-g:texlive-easy-todo)
msgid ""
-"A set of fonts that extend the txfonts bundle with small caps and old style numbers, together with Greek support. The extensions are made with modifications of the GNU Freefont.\n"
+"The package provides to-do notes throughout a document, and will provide an index of things to do.\n"
"\n"
-"date: 2011-03-01 16:09:11 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pdf-trans)
-msgid "A set of macros for various transformations of TeX boxes"
+#. summary(texlive-specs-g:texlive-easy-todo-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-easy-todo"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-g:texlive-easy-todo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-easy-todo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-easyfig)
+msgid "Simplifying the use of common figures"
msgstr ""
-#. description(texlive-resumemac)
+#. description(texlive-specs-g:texlive-easyfig)
msgid ""
-"A set of macros is provided, together with an file that offers an example of use.\n"
+"The package provides the command \\Figure[...]{<image filename>} to simplify the business of including an image as figure in the most common form (centred and with caption and label). Caption and label are set using the caption and label keys; the label fig:<image filename> is used if none is given. If the here key is given, the figure is not 'floated', and the user is responsible for placement. The package uses the author's package adjustbox to centre an image and to simplify further modifications.\n"
"\n"
-"date: 2008-11-21 00:34:08 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-sudokubundle)
-msgid "A set of sudoku-related packages"
+#. summary(texlive-specs-g:texlive-easyfig-doc)
+#, fuzzy
+msgid "Documentation for texlive-easyfig"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-easyfig-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-easyfig"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-easylist)
+msgid "Lists using a single active character"
msgstr ""
-#. description(texlive-ifsym)
+#. description(texlive-specs-g:texlive-easylist)
msgid ""
-"A set of symbol fonts, written in Metafont, offering (respectively) clock-face symbols, geometrical symbols, weather symbols, mountaineering symbols, electronic circuit symbols and a set of miscellaneous symbols. A LaTeX package is provided, that allows the user to load only those symbols needed in a document.\n"
+"This package allows you to create lists of numbered items (as in Wittgenstein's 'Tractatus') with a single active character as the only command. A variety of parameters are available to configure the appearance of the list; lists may be nested (effectively to unlimited depth).\n"
"\n"
-"date: 2011-04-10 20:02:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-templates-sommer)
-msgid ""
-"A set of templates for using LaTeX packages that the author uses, comprising: - Hausarbeit.tex: for students of the Lehrstuhl Volkskunde an der Friedrich-Schiller-Universitat Jena; - Psycho-Dipl.tex: for diploma theses in psychology.\n"
-"\n"
-"date: 2008-08-24 08:50:19 +0000"
+#. summary(texlive-specs-g:texlive-easylist-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-easylist"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-g:texlive-easylist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-easylist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ebezier)
+msgid "Device independent picture environment enhancement"
msgstr ""
-#. description(texlive-templates-fenn)
+#. description(texlive-specs-g:texlive-ebezier)
msgid ""
-"A set of templates for using LaTeX packages that the author uses, comprising: - scrlttr2.tex: a letter, written with scrlttr2.cls from the KOMA-Script bundle; - dinbrief.tex: a letter according to the German (DIN) standards, written with dinbrief.cls; - kbrief.tex: a brief memo ('Kurzbrief') to accompany enclosures, as used in German offices, again based on dinbrief; - vermerk.tex: a general form for taking down notes on events in the office; and - diabetes.tex: a diary for the basis-bolus insulin therapy of diabetes mellitus, using scrartcl.cls from the KOMA-Script bundle.\n"
+"Ebezier is a device independent extension for the standard picture environment. Linear, quadratic, and cubic bezier curves are supplied in connection with higher level circle drawing commands. Additionally some macros for the calculation of curve lenghts are part of this package.\n"
"\n"
-"date: 2009-08-28 13:51:43 +0000"
+"date: 2012-06-07 13:01:30 +0000"
msgstr ""
-#. summary(texlive-midnight)
-msgid "A set of useful macro tools"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ebezier-doc)
+#, fuzzy
+msgid "Documentation for texlive-ebezier"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-MemoirChapStyles)
+#. description(texlive-specs-g:texlive-ebezier-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ebezier"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ebgaramond)
+#, fuzzy
+msgid "LaTeX support for EBGaramond fonts"
+msgstr "XML podpora pro castor"
+
+#. description(texlive-specs-g:texlive-ebgaramond)
msgid ""
-"A showcase of chapter styles available to users of memoir: the six provided in the class itself, plus many from elsewhere (by the present author and others). The package's resources apply only to memoir, but the package draws from a number of sources relating to standard classes, including the fncychap package, and Vincent Zoonekynd's tutorial on headings.\n"
+"EB Garamond is a revival by Georg Duffner of the 16th century fonts designed by Claude Garamond. The LaTeX support package works for (pdf)LaTeX, xeLaTeX and luaLaTeX users; configuration files for use with microtype are provided.\n"
"\n"
-"date: 2012-04-11 14:14:01 +0000"
+"date: 2014-04-25 19:03:35 +0000"
msgstr ""
-#. summary(texlive-usebib)
-msgid "A simple bibloography processor"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ebgaramond-doc)
+#, fuzzy
+msgid "Documentation for texlive-ebgaramond"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-simplecv)
-msgid "A simple class for writing curricula vitae"
-msgstr ""
+#. description(texlive-specs-g:texlive-ebgaramond-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ebgaramond"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tapir)
-msgid "A simple geometrical font"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ebgaramond-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-ebgaramond"
+msgstr "Dokumentace pro adaptx"
-#. description(vim-plugins:vim-plugin-colorsel)
-msgid "A simple interactive RGB/HSV color selector modelled after Gimp2 RGB/HSV color selector."
-msgstr ""
+#. description(texlive-specs-g:texlive-ebgaramond-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-ebgaramond"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-ltxnew)
-msgid "A simple means of creating commands"
+#. summary(texlive-specs-g:texlive-ebong)
+msgid "Utility for writing Bengali in Rapid Roman Format"
msgstr ""
-#. description(texlive-nuc)
+#. description(texlive-specs-g:texlive-ebong)
msgid ""
-"A simple package providing nuclear sub- and superscripts as commonly used in radiochemistry, radiation science, and nuclear physics and engineering applications. Isotopes which have Z with more digits than A require special spacing to appear properly; this spacing is supported in the package.\n"
+"A tool (preprocessor) for writing your pRaa-ne-r ka-thaa in the bengali language. It allows one to write the text in Rapid Roman Bangla and convert it to the bangtex format by a python program. All LaTeX markups are preserved in the target file.\n"
"\n"
-"date: 2011-04-28 10:45:40 +0000"
+"date: 2012-05-25 20:30:43 +0000"
msgstr ""
-#. description(texlive-ifxetex)
-msgid ""
-"A simple package which provides an \\ifxetex conditional, so that other code can determine that it is running under XeTeX. The package requires the e-TeX extensions to the TeX primitive set.\n"
-"\n"
-"date: 2009-01-27 07:30:55 +0000"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ebong-doc)
+#, fuzzy
+msgid "Documentation for texlive-ebong"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-minibox)
-msgid "A simple type of box for LaTeX"
-msgstr ""
+#. description(texlive-specs-g:texlive-ebong-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ebong"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-uwmslide)
-msgid ""
-"A slide format which produces slides with a simple Power Point like appearance. Several useful features include: use of standard titlepage to produce title slide; several slide environments including plain (page with a title), double slide (two column page with slide title), item slide (item list with title), left item slide, and right item slide. Logos are placed in the upper left corner of each slide if the logo file logo.eps is present. Preconfigured in landscape mode by default and uses Times Roman by default (originally, it was claimed, for simple conversion to PDF format).\n"
-"\n"
-"date: 2012-02-24 10:11:42 +0000"
+#. summary(texlive-specs-g:texlive-ebook)
+msgid "Ebook"
msgstr ""
-#. description(texlive-pslatex)
+#. description(texlive-specs-g:texlive-ebook)
msgid ""
-"A small package that makes LaTeX default to 'standard' PostScript fonts. It is basically a merger of the times and the (obsolete) mathptm packages from the psnfss suite. You must have installed standard LaTeX and the psnfss PostScript fonts to use this package. The main novel feature is that the pslatex package tries to compensate for the visual differences between the Adobe fonts by scaling Helvetica by 90%, and 'condensing' Courier (i.e. scaling horizontally) by 85%. The package is supplied with a (unix) shell file for a 'pslatex' command that allows standard LaTeX documents to be processed, without needing to edit the file. Note that current psnfss uses a different technique for scaling Helvetica, and treats Courier as a lost cause (there are better free fixed-width available now, than there were when pslatex was designed). As a result, pslatex is widely considered obsolete.\n"
+"The package defines a command \\ebook that defines page layout, fonts, and font-sizes for documents to be rendered as PDF- ebooks on small ebook-readers. The package has been tested with Kindle e-ink and iPad mini.\n"
"\n"
-"date: 2009-10-07 20:25:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tex)
-msgid "A sophisticated typesetting engine"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ebook-doc)
+#, fuzzy
+msgid "Documentation for texlive-ebook"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-thinsp)
-msgid "A stretchable \\thinspace for LaTeX"
-msgstr ""
+#. description(texlive-specs-g:texlive-ebook-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ebook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xesearch)
-msgid "A string finder for XeTeX"
+#. summary(texlive-specs-g:texlive-ebsthesis)
+msgid "Typesetting theses for economics"
msgstr ""
-#. summary(texlive-latex-tds)
-msgid "A structured copy of the LaTeX distribution"
+#. description(texlive-specs-g:texlive-ebsthesis)
+msgid ""
+"The ebsthesis class and ebstools package facilitate the production of camera-ready manuscripts in conformance with the guidelines of Gabler Verlag and typographical rules established by the European Business School.\n"
+"\n"
+"date: 2011-11-23 22:58:18 +0000"
msgstr ""
-#. summary(texlive-japanese)
-msgid "A substitute for a babel package for Japanese"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ebsthesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-ebsthesis"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pictexsum)
-msgid "A summary of PicTeX commands"
-msgstr ""
+#. description(texlive-specs-g:texlive-ebsthesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ebsthesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-shuffle)
-msgid "A symbol for the shuffle product"
+#. summary(texlive-specs-g:texlive-ec)
+msgid "Computer modern fonts in T1 and TS1 encodings"
msgstr ""
-#. summary(texlive-yagusylo)
-msgid "A symbol loader"
+#. description(texlive-specs-g:texlive-ec)
+msgid ""
+"The EC fonts are European Computer Modern Fonts, supporting the complete LaTeX T1 encoding defined at the 1990 TUG conference hold at Cork/Ireland. These fonts are intended to be stable with no changes being made to the tfm files. The set also contains a Text Companion Symbol font, called tc, featuring many useful characters needed in text typesetting, for example oldstyle digits, currency symbols (including the newly created Euro symbol), the permille sign, copyright, trade mark and servicemark as well as a copyleft sign, and many others. Recent releases of LaTeX2e support the EC fonts. The EC fonts supersede the preliminary version released as the DC fonts. The fonts are available in (traced) Adobe Type 1 format, as part of the cm-super bundle. The other Computer Modern-style T1-encoded Type 1 set, Latin Modern, is not actually a direct development of the EC set, and differs from the EC in a number of particulars.\n"
+"\n"
+"date: 2014-04-26 17:51:19 +0000"
msgstr ""
-#. summary(texlive-metafont)
-msgid "A system for specifying fonts"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ec-doc)
+#, fuzzy
+msgid "Documentation for texlive-ec"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tabriz-thesis)
-msgid "A template for the University of Tabriz"
-msgstr ""
+#. description(texlive-specs-g:texlive-ec-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ec"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-york-thesis)
-msgid "A thesis class file for York University, Toronto"
+#. summary(texlive-specs-g:texlive-ecc)
+msgid "Sources for the European Concrete fonts"
msgstr ""
-#. summary(texlive-ucdavisthesis)
-msgid "A thesis/dissertation class for University of California Davis"
-msgstr ""
-
-#. summary(texlive-tdclock)
-msgid "A ticking digital clock package for PDF output"
-msgstr ""
-
-#. description(texlive-tdclock)
+#. description(texlive-specs-g:texlive-ecc)
msgid ""
-"A ticking digital clock package to be used in Pdf-LaTeX documents, for example in presentations.\n"
+"The Metafont sources and TFM files of the European Concrete Fonts. This is the T1-encoded extension of Knuth's Concrete fonts, including also the corresponding text companion fonts. Adobe Type 1 versions of the fonts are available as part of the cm-super font bundle.\n"
"\n"
-"date: 2009-06-23 11:06:36 +0000"
+"date: 2014-04-25 19:09:06 +0000"
msgstr ""
-#. summary(texlive-tokenizer)
-msgid "A tokenizer"
+#. summary(texlive-specs-g:texlive-ecc-doc)
+#, fuzzy
+msgid "Documentation for texlive-ecc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-ecc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ecc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ecclesiastic)
+msgid "Typesetting Ecclesiastic Latin"
msgstr ""
-#. description(texlive-tokenizer)
+#. description(texlive-specs-g:texlive-ecclesiastic)
msgid ""
-"A tokenizer for LaTeX. \\GetTokens{Target1}{Target2}{Source} Splits Source into two tokens at the first encounter of a comma. The first token is saved in a newly created command with the name passed as Target1 and the second token likewise. A package option 'trim' causes leading and trailing space to be removed from each token; with this option, the \\TrimSpaces command is defined, which removes leading and trailing spaces from its argument.\n"
+"The package modifies the way the latin option to babel operates when typesetting Latin. The style is somewhat 'frenchified' in respect of punctuation spacings and footnote style; shortcuts are available in order to set accents on all vowels, including y and the diphthongs ae and oe.\n"
"\n"
-"date: 2006-12-23 08:07:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(youtube-dl)
-msgid "A tool for downloading from Youtube"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ecclesiastic-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-ecclesiastic"
+msgstr "Dokumentace pro castor"
-#. summary(vusb-analyzer)
-msgid "A tool for viewing USB trace files from usbmon and other usb dump formats"
+#. description(texlive-specs-g:texlive-ecclesiastic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ecclesiastic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ecltree)
+msgid "Trees using epic and eepic macros"
msgstr ""
-#. description(texlive-latex2man)
+#. description(texlive-specs-g:texlive-ecltree)
msgid ""
-"A tool to translate UNIX manual pages written with LaTeX into a man-page format understood by the Unix man(1) command. Alternatively HTML or TexInfo code can be produced. Output of parts of the text may be supressed using the conditional text feature.\n"
+"The package recursively draws trees: each subtree is defined in a 'bundle' environment, with a set of leaves described by \\chunk macros. A chunk may have a bundle environment inside it.\n"
"\n"
-"date: 2012-06-09 08:33:16 +0000"
+"date: 2012-02-10 17:22:03 +0000"
msgstr ""
-#. description(texlive-locality)
-msgid ""
-"A toolbox of macros designed to allow the LaTeX programmer to work around some of the restrictions of the TeX grouping mechanisms. The present release offers a preliminary view of the package; not all of its facilities are working optimally\n"
-"\n"
-"date: 2010-11-12 14:28:10 +0000"
+#. summary(texlive-specs-g:texlive-ecltree-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-ecltree"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-g:texlive-ecltree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ecltree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-eco)
+msgid "Oldstyle numerals using EC fonts"
msgstr ""
-#. description(texlive-lshort-mongol)
+#. description(texlive-specs-g:texlive-eco)
msgid ""
-"A translation of Oetiker's Not so short introduction.\n"
+"A set of font metric files and virtual fonts for using the EC fonts with oldstyle numerals. These files can only be used together with the standard ec fonts. The style file eco.sty is sufficient to use the eco fonts but if you intend to use other font families as well, e.g., PostScript fonts, try altfont.\n"
"\n"
-"date: 2009-11-09 22:05:00 +0000"
+"date: 2014-04-25 19:16:06 +0000"
msgstr ""
-#. description(texlive-lshort-korean)
+#. summary(texlive-specs-g:texlive-eco-doc)
+#, fuzzy
+msgid "Documentation for texlive-eco"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-eco-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eco"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-economic)
+#, fuzzy
+msgid "BibTeX support for submitting to Economics journals"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
+
+#. description(texlive-specs-g:texlive-economic)
msgid ""
-"A translation of Oetiker's original (not so) short introduction.\n"
+"The bundle offers macros and BibTeX styles for the American Economic Review (AER), the American Journal of Agricultural Economics (AJAE), the Canadian Journal of Economics (CJE), the European Review of Agricultural Economics (ERAE), the International Economic Review (IER) and Economica. The macro sets are based on (and require) the harvard package, and all provide variations of author-date styles of presentation.\n"
"\n"
-"date: 2006-08-27 15:41:02 +0000"
+"date: 2014-01-13 10:14:58 +0000"
msgstr ""
-#. description(texlive-mpman-ru)
-msgid ""
-"A translation of the user manual, as distributed with MetaPost itself.\n"
-"\n"
-"date: 2008-08-22 15:15:44 +0000"
+#. summary(texlive-specs-g:texlive-economic-doc)
+#, fuzzy
+msgid "Documentation for texlive-economic"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-economic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-economic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ecv)
+msgid "A fancy Curriculum Vitae class"
msgstr ""
-#. description(texlive-lshort-chinese)
+#. description(texlive-specs-g:texlive-ecv)
msgid ""
-"A translation to Chinese of the not so short introduction to LaTeX2e, presented by the Chinese TeX Society CTeX. The processed output is created by use of XeTeX.\n"
+"The class provides an environment for creating a fancily laid out tabular curriculum vitae inspired by the european curriculum vitae. The distribution comes with a German and an English template.\n"
"\n"
-"date: 2008-07-16 14:26:02 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-translation-tabbing-fr)
+#. summary(texlive-specs-g:texlive-ecv-doc)
+#, fuzzy
+msgid "Documentation for texlive-ecv"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-ecv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ecv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ed)
+#, fuzzy
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Editorial Notes for LaTeX documents"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
+
+#. description(texlive-specs-g:texlive-ed)
msgid ""
-"A translation to French (by the author) of the documentation of the Tabbing package.\n"
+"This package defines a couple of editorial notes that simplify collaboration on a LaTeX text. These allow authors to annotate status information in the source. In draft mode, the annotations are shown for communication, and in publication mode these are suppressed.\n"
"\n"
-"date: 2011-10-06 11:30:54 +0000"
+"date: 2012-01-29 15:01:54 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-NERDtree)
-msgid "A tree explorer plugin for navigating the filesystem"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ed-doc)
+#, fuzzy
+msgid "Documentation for texlive-ed"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xypic-tut-pt)
-msgid "A tutorial for XY-pic, in Portuguese"
-msgstr ""
+#. description(texlive-specs-g:texlive-ed-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ed"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-patgen2-tutorial)
-msgid "A tutorial on the use of Patgen 2"
+#. summary(texlive-specs-g:texlive-edfnotes)
+msgid "Critical annotations to footnotes with ednotes"
msgstr ""
-#. summary(texlive-iwona)
-msgid "A two-element sans-serif font"
-msgstr ""
-
-#. summary(texlive-kurier)
-msgid "A two-element sans-serif typeface"
-msgstr ""
-
-#. description(texlive-latex-doc-ptr)
+#. description(texlive-specs-g:texlive-edfnotes)
msgid ""
-"A two-page set of recommendations for users who need on-line documentation of LaTeX. The document supports the need for documentation of LaTeX itself, in distributions. For example, it could be used in the command texdoc latex, in the TeX live distribution.\n"
+"The package modifies the annotation commands and label-test mechanism of the ednotes package so that critical notes appear on the pages and in the order that one would expect.\n"
"\n"
-"date: 2009-06-03 13:14:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(ubuntu-fonts)
-msgid "A unique, custom designed font that has a very distinctive look and feel"
-msgstr ""
+#. summary(texlive-specs-g:texlive-edfnotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-edfnotes"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pdfcomment)
-msgid "A user-friendly interface to pdf annotations"
-msgstr ""
+#. description(texlive-specs-g:texlive-edfnotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-edfnotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mkpattern)
+#. summary(texlive-specs-g:texlive-edmac)
#, fuzzy
-#| msgid "A utility for configuring serial ports"
-msgid "A utility for making hyphenation patterns"
-msgstr "Nástroje pro konfiguraci sériových portů"
+#| msgid "Fonts for TV Applications"
+msgid "Typeset critical editions"
+msgstr "Písma pro TV aplikace"
-#. summary(texlive-pbox)
-msgid "A variable-width \\parbox command"
+#. description(texlive-specs-g:texlive-edmac)
+msgid ""
+"This is the type example package for typesetting scholarly critical editions.\n"
+"\n"
+"date: 2012-01-26 14:57:28 +0000"
msgstr ""
-#. summary(texlive-varwidth)
-msgid "A variable-width minipage"
-msgstr ""
+#. summary(texlive-specs-g:texlive-edmac-doc)
+#, fuzzy
+msgid "Documentation for texlive-edmac"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tabularew)
-msgid "A variation on the tabular environment"
+#. description(texlive-specs-g:texlive-edmac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-edmac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-edmargin)
+msgid "Multiple series of endnotes for critical editions"
msgstr ""
-#. description(texlive-trimspaces)
+#. description(texlive-specs-g:texlive-edmargin)
msgid ""
-"A very short package that allows you to expandably remove spaces around a token list (commands are provided to remove spaces before, spaces after, or both); or to remove surrounding spaces within a macro definition, or to define space-stripped macros.\n"
+"Edmargin provides a very simple scheme for endnote sections for critical editions. Endnotes can either be marked in the text, or with marginal references to the page in the note sections where the note is to be found. Notes can be set in individual paragraphs, or in block paragraph mode (where there are many short notes). Note sections will have running headers of the form \"Textual notes to pp. xx--yy\". New note sections can be created on the fly. There are predefined endnote sections for textual notes, emendations, and explanatory notes.\n"
"\n"
-"date: 2009-11-10 07:50:14 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-omega)
-msgid "A wide-character-set extension of TeX"
-msgstr ""
+#. summary(texlive-specs-g:texlive-edmargin-doc)
+#, fuzzy
+msgid "Documentation for texlive-edmargin"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mparhack)
-msgid "A workaround for a LaTeX bug in marginpars"
-msgstr ""
+#. description(texlive-specs-g:texlive-edmargin-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-edmargin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xf86-video-geode)
-msgid "AMD Geode GX and LX video driver for the Xorg X server"
+#. summary(texlive-specs-g:texlive-ednotes)
+#. summary(texlive-specs-g:texlive-eledmac)
+#. summary(texlive-specs-m:texlive-ledmac)
+msgid "Typeset scholarly editions"
msgstr ""
-#. summary(texlive-juraabbrev)
-msgid "Abbreviations for typesetting (German) juridical documents"
+#. description(texlive-specs-g:texlive-ednotes)
+msgid ""
+"A macro package for typesetting scholarly critical editions. Provides macros for critical edition typesetting with LaTeX, including support for line numbers and layers of footnotes.\n"
+"\n"
+"date: 2012-05-25 12:20:18 +0000"
msgstr ""
-#. summary(texlive-realscripts)
-msgid "Access OpenType subscript and superscript glyphs"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ednotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-ednotes"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-slantsc)
-msgid "Access different-shaped small-caps fonts"
-msgstr ""
+#. description(texlive-specs-g:texlive-ednotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ednotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rterface)
-msgid "Access to R analysis from within a document"
+#. summary(texlive-specs-g:texlive-eemeir)
+msgid "Adjust the gender of words in a document"
msgstr ""
-#. summary(texlive-pdfcprot)
-msgid "Activating and setting of character protruding using pdflatex"
+#. description(texlive-specs-g:texlive-eemeir)
+msgid ""
+"Defines macros for third-person singular pronouns (\\E, \\Em, \\Eir, \\Eirs), which expand differently according to a masculine/feminine switch. (If the switch is 'masculine', they would expand to 'he', 'him', 'his' and 'his'; if 'feminine', they would expand to 'she', 'her', 'her' and 'hers'. Apart from the pronouns, one can define 'word pairs', such as mother/father, daughter/son, and so on. Gender may be defined once per document, as an environment, or may be flipped on the fly.\n"
+"\n"
+"date: 2013-03-23 12:28:28 +0000"
msgstr ""
-#. summary(texlive-tocbibind)
-msgid "Add bibliography/index/contents to Table of Contents"
-msgstr ""
+#. summary(texlive-specs-g:texlive-eemeir-doc)
+#, fuzzy
+msgid "Documentation for texlive-eemeir"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-titlepic)
-msgid "Add picture to title page of a document"
-msgstr ""
+#. description(texlive-specs-g:texlive-eemeir-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eemeir"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-titlefoot)
-msgid "Add special material to footer of title page"
+#. summary(texlive-specs-g:texlive-eepic)
+msgid "Extensions to epic and the LaTeX drawing tools"
msgstr ""
-#. summary(texlive-lstaddons)
-msgid "Add-on packagvess for listings: autogobble and line background"
+#. description(texlive-specs-g:texlive-eepic)
+msgid ""
+"Extensions to epic and the LaTeX picture drawing environment, include the drawing of lines at any slope, the drawing of circles in any radii, and the drawing of dotted and dashed lines much faster with much less TeX memory, and providing several new commands for drawing ellipses, arcs, splines, and filled circles and ellipses. The package uses tpic \\special commands.\n"
+"\n"
+"date: 2012-05-25 12:20:18 +0000"
msgstr ""
-#. summary(texlive-lualibs)
-msgid "Additional Lua functions for LuaTeX macro programmers"
-msgstr ""
+#. summary(texlive-specs-g:texlive-eepic-doc)
+#, fuzzy
+msgid "Documentation for texlive-eepic"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luatextra)
-msgid "Additional macros for Plain TeX and LaTeX in LuaTeX"
-msgstr ""
+#. description(texlive-specs-g:texlive-eepic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eepic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xerces-j2:xerces-j2-scripts)
-msgid "Additional utility scripts for xerces-j2"
+#. summary(texlive-specs-g:texlive-efbox)
+msgid "Extension of \\fbox, with controllable frames and colours"
msgstr ""
-#. description(texlive-regcount)
+#. description(texlive-specs-g:texlive-efbox)
msgid ""
-"Adds a macro \\rgcount which displays the allocation status of the TeX registers. The display is written into the .log file as it is a bit verbose. An automatic call to \\rgcount is done at \\begin{document} and \\end{document}.\n"
+"The package defines the \\efbox command, which creates a box just wide enough to hold the text created by its argument. The command optionally puts a (possibly partial) frame around the box, and allows setting the box background colour.\n"
"\n"
-"date: 2010-10-02 15:24:09 +0000"
+"date: 2014-03-28 16:26:17 +0000"
msgstr ""
-#. description(texlive-lineno)
+#. summary(texlive-specs-g:texlive-efbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-efbox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-efbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-efbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-egameps)
+msgid "LaTeX package for typesetting extensive games"
+msgstr ""
+
+#. description(texlive-specs-g:texlive-egameps)
msgid ""
-"Adds line numbers to selected paragraphs with reference possible through the LaTeX \\ref and \\pageref cross reference mechanism. Line numbering may be extended to footnote lines, using the fnlineno package.\n"
+"The style is intended to have enough features to draw any extensive game with relative ease. The facilities of PSTricks are used for graphics. (An older version of the package, which uses the LaTeX picture environment rather than PSTricks and consequently has many fewer features is available on the package home page.)\n"
"\n"
-"date: 2011-02-16 16:09:51 +0000"
+"date: 2012-05-25 12:20:18 +0000"
msgstr ""
-#. summary(texlive-pictex2)
-msgid "Adds relative coordinates and improves the \\plot command"
+#. summary(texlive-specs-g:texlive-egameps-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-egameps"
+msgstr "Dokumentace pro digiKam"
+
+#. description(texlive-specs-g:texlive-egameps-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-egameps"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-egplot)
+msgid "Encapsulate Gnuplot sources in LaTeX documents"
msgstr ""
-#. description(texlive-pictex2)
+#. description(texlive-specs-g:texlive-egplot)
msgid ""
-"Adds two user commands to standard PiCTeX. One command uses relative coordinates, thus eliminating the need to calculate the coordinate of every point manually as in standard PiCTeX. The other command modifies \\plot to use a rule instead of dots if the line segment is horizontal or vertical.\n"
+"A package to encapsulate gnuplot commands in a LaTeX source file, so that a document's figures are maintained in parallel with the document source itself.\n"
"\n"
-"date: 2007-01-13 08:26:05 +0000"
+"date: 2012-05-25 12:41:32 +0000"
msgstr ""
-#. description(texlive-nonfloat)
+#. summary(texlive-specs-g:texlive-egplot-doc)
+#, fuzzy
+msgid "Documentation for texlive-egplot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-egplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-egplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-eiad)
+#, fuzzy
+#| msgid "Additional scripts for ant"
+msgid "Traditional style Irish fonts"
+msgstr "Další skripty pro ant"
+
+#. description(texlive-specs-g:texlive-eiad)
msgid ""
-"Adjusts the figure and table environments to ensure that centered objects as one line captions are centered as well. Also the vertical spaces for table captions above the table are changed.\n"
+"In both lower and upper case 32 letters are defined (18 'plain' ones, 5 long vowels and 9 aspirated consonants). The ligature 'agus' is also made available. The remaining characters (digits, punctuation and accents) are inherited from the Computer Modern family of fonts. The font definitions use code from the sauter fonts, so those fonts have to be installed before using eiad. OT1*.fd files are provided for use with LaTeX.\n"
"\n"
-"date: 2007-01-11 23:17:35 +0000"
+"date: 2012-06-04 09:02:08 +0000"
msgstr ""
-#. summary(texlive-initials)
-msgid "Adobe Type 1 decorative initial fonts"
-msgstr ""
+#. summary(texlive-specs-g:texlive-eiad-doc)
+#, fuzzy
+msgid "Documentation for texlive-eiad"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-utopia)
-msgid "Adobe Utopia fonts"
-msgstr ""
+#. description(texlive-specs-g:texlive-eiad-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eiad"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-japanese-otf)
-msgid "Advanced font selection for platex and its friends"
+#. summary(texlive-specs-g:texlive-eiad-ltx)
+msgid "LaTeX support for the eiad font"
msgstr ""
-#. summary(texlive-refstyle)
-msgid "Advanced formatting of cross references"
+#. description(texlive-specs-g:texlive-eiad-ltx)
+msgid ""
+"The package provides macros to support use of the eiad fonts in OT1 encoding. Also offered are a couple of Metafont files described in the font package, but not provided there.\n"
+"\n"
+"date: 2012-06-04 09:02:08 +0000"
msgstr ""
-#. summary(texlive-verse)
-msgid "Aids for typesetting simple verse"
-msgstr ""
+#. summary(texlive-specs-g:texlive-eiad-ltx-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-eiad-ltx"
+msgstr "Dokumentace pro adaptx"
-#. description(vim-plugins:vim-plugin-align)
-msgid "Align lets you align statements on their equal signs, make comment boxes, align comments, align declarations, etc. It handles alignment on multiple separators, not just the first one, and the separators may be the same across the line or different."
-msgstr ""
+#. description(texlive-specs-g:texlive-eiad-ltx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eiad-ltx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-monofill)
-msgid "Alignment of plain text"
+#. summary(texlive-specs-g:texlive-eijkhout)
+msgid "Victor Eijkhout's packages"
msgstr ""
-#. description(yast2-trans-pot)
-msgid "All .pot files"
+#. description(texlive-specs-g:texlive-eijkhout)
+msgid ""
+"Three unrelated packages: DB_process, to parse and process database output; CD_labeler, to typeset user text to fit on a CD label; and repeat, a nestable, generic loop macro.\n"
+"\n"
+"date: 2013-12-17 16:06:14 +0000"
msgstr ""
-#. summary(yast2-trans-pot)
-msgid "All YaST .pot Files (for devel only)"
+#. summary(texlive-specs-g:texlive-einfuehrung)
+msgid "Examples from the book Einfuhrung in LaTeX"
msgstr ""
-#. summary(texlive-spverbatim)
-msgid "Allow line breaks within \\verb and verbatim output"
+#. description(texlive-specs-g:texlive-einfuehrung)
+msgid ""
+"The bundle consists of examples and data files for the DANTE- Edition book \"Einfuhrung in LaTeX\"\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tie)
-msgid "Allow multiple web change files"
+#. summary(texlive-specs-g:texlive-ejpecp)
+msgid "Class for EJP and ECP"
msgstr ""
-#. description(texlive-psfrag)
+#. description(texlive-specs-g:texlive-ejpecp)
msgid ""
-"Allows LaTeX constructions (equations, picture environments, etc.) to be precisely superimposed over Encapsulated PostScript figures, using your own favorite drawing tool to create an EPS figure and placing simple text 'tags' where each replacement is to be placed, with PSfrag automatically removing these tags from the figure and replacing them with a user specified LaTeX construction, properly aligned, scaled, and/or rotated.\n"
+"The class is designed for typesetting articles for the mathematical research periodicals Electronic Journal of Probability (EJP) and Electronic Communications in Probability (ECP).\n"
"\n"
-"date: 2009-10-07 20:25:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-wrapfig)
-msgid ""
-"Allows figures or tables to have text wrapped around them. Does not work in combination with list environments, but can be used in a parbox or minipage, and in twocolumn format. Supports the float package.\n"
-"\n"
-"date: 2011-04-09 10:56:30 +0000"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ejpecp-doc)
+#, fuzzy
+msgid "Documentation for texlive-ejpecp"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-moresize)
-msgid "Allows font sizes up to 35.83pt"
-msgstr ""
+#. description(texlive-specs-g:texlive-ejpecp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ejpecp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xcomment)
-msgid "Allows selected environments to be included/excluded"
+#. summary(texlive-specs-g:texlive-elbioimp)
+msgid "A LaTeX document class for the Journal of Electrical Bioimpedance"
msgstr ""
-#. description(texlive-outliner)
+#. description(texlive-specs-g:texlive-elbioimp)
msgid ""
-"Allows you to write \"\\Level 2 {Some heading}\" instead of the usual \\section stuff; the definitions of the levels can then easily be changed. There is a mechanism for shifting all levels. This makes it easy to bundle existing articles into a compilation.\n"
+"A document class for writing articles to the Journal of Electrical Bioimpedance.\n"
"\n"
-"date: 2007-01-12 14:52:44 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lcd)
-msgid "Alphanumerical LCD-style displays"
-msgstr ""
+#. summary(texlive-specs-g:texlive-elbioimp-doc)
+#, fuzzy
+msgid "Documentation for texlive-elbioimp"
+msgstr "Dokumentace pro adaptx"
-#. summary(vim-plugins:vim-plugin-a)
-msgid "Alternate files quickly"
-msgstr ""
+#. description(texlive-specs-g:texlive-elbioimp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-elbioimp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nestquot)
-msgid "Alternate quotes between double and single with nesting"
+#. summary(texlive-specs-g:texlive-electrum)
+msgid "Electrum ADF fonts collection"
msgstr ""
-#. summary(texlive-newpx)
-msgid "Alternative uses of the PX fonts, with improved metrics"
+#. description(texlive-specs-g:texlive-electrum)
+msgid ""
+"Electrum ADF is a slab-serif font featuring optical and italic small-caps; additional ligatures and an alternate Q; lining, hanging, inferior and superior digits; and four weights. The fonts are provided in Adobe Type 1 format and the support material enables use with LaTeX. Licence is mixed: LPPL for LaTeX support; GPL with font exception for the fonts.\n"
+"\n"
+"date: 2014-04-26 17:51:19 +0000"
msgstr ""
-#. summary(texlive-newtx)
-msgid "Alternative uses of the TX fonts, with improved metrics"
-msgstr ""
+#. summary(texlive-specs-g:texlive-electrum-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-electrum"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-morewrites)
-msgid "Always room for a new write stream"
+#. description(texlive-specs-g:texlive-electrum-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-electrum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-electrum-fonts)
+msgid "Severed fonts for texlive-electrum"
msgstr ""
-#. summary(texlive-ifxetex)
-msgid "Am I running under XeTeX?"
+#. description(texlive-specs-g:texlive-electrum-fonts)
+msgid "The separated fonts package for texlive-electrum"
msgstr ""
-#. summary(texlive-iftex)
-msgid "Am I running under pdfTeX, XeTeX or LuaTeX?"
+#. summary(texlive-specs-g:texlive-eledform)
+msgid "Define textual variants"
msgstr ""
-#. description(texlive-turnstile)
+#. description(texlive-specs-g:texlive-eledform)
msgid ""
-"Among other uses, the turnstile sign is used by logicians for denoting a consequence relation, related to a given logic, between a collection of formulas and a derived formula.\n"
+"The package provides commands to formalize textual variants in critical editions typeset using eledmac.\n"
"\n"
-"date: 2008-08-24 12:43:48 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tamethebeast)
+#. summary(texlive-specs-g:texlive-eledform-doc)
+#, fuzzy
+msgid "Documentation for texlive-eledform"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-eledform-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eledform"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. description(texlive-specs-g:texlive-eledmac)
msgid ""
-"An (as-complete-as-possible) manual about bibliographies in LaTeX, and thus mainly about BibTeX.\n"
+"A package for typesetting scholarly critical editions, replacing the established ledmac package. Ledmac itself was a LaTeX port of the plain TeX EDMAC macros. The package supports indexing by page and by line numbers, and simple tabular- and array-style environments. The package is distributed with the related eledpar package.\n"
"\n"
-"date: 2009-10-11 19:12:19 +0000"
+"date: 2014-05-14 14:12:10 +0000"
msgstr ""
-#. summary(texlive-stex)
-msgid "An Infrastructure for Semantic Preloading of LaTeX Documents"
-msgstr ""
+#. summary(texlive-specs-g:texlive-eledmac-doc)
+#, fuzzy
+msgid "Documentation for texlive-eledmac"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-startex)
-msgid "An XML-inspired format for student use"
+#. description(texlive-specs-g:texlive-eledmac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eledmac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-ellipsis)
+msgid "Fix uneven spacing around ellipses in LaTeX text mode"
msgstr ""
-#. description(texlive-simplified-latex)
+#. description(texlive-specs-g:texlive-ellipsis)
msgid ""
-"An accessible introduction for the beginner.\n"
+"This is a simple package that fixes a problem in the way LaTeX handles ellipses: it always puts a tiny bit more space after \\dots in text mode than before it, which results in the ellipsis being off-center when used between two words.\n"
"\n"
-"date: 2010-11-29 21:48:23 +0000"
+"date: 2012-05-25 12:41:32 +0000"
msgstr ""
-#. summary(texlive-munich)
-msgid "An alternative authordate bibliography style"
-msgstr ""
+#. summary(texlive-specs-g:texlive-ellipsis-doc)
+#, fuzzy
+msgid "Documentation for texlive-ellipsis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-support)
-msgid ""
-"An appropriate set of job options, together with process scripts for use with TeXnicCenter/\n"
-"\n"
-"date: 2009-02-07 20:39:27 +0000"
+#. description(texlive-specs-g:texlive-ellipsis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ellipsis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-elmath)
+msgid "Mathematics in Greek texts"
msgstr ""
-#. description(texlive-umlaute)
+#. description(texlive-specs-g:texlive-elmath)
msgid ""
-"An early package for using alternate input encodings. The author considers the package mostly obsolete, since most of its functions are taken by the inputenc package; however, inputenc doesn't support the roman8 and atari encodings, so umlaute remains the sole source of that support.\n"
+"This package has been designed to facilitate the use of Greek letters in mathematical mode. The package allows one to directly type in Greek letters (in ISO 8859-7 encoding) in math mode.\n"
"\n"
-"date: 2009-10-10 15:55:02 +0000"
+"date: 2012-04-10 15:44:48 +0000"
msgstr ""
-#. summary(texlive-widetable)
-msgid "An environment for typesetting tables of specified width"
-msgstr ""
+#. summary(texlive-specs-g:texlive-elmath-doc)
+#, fuzzy
+msgid "Documentation for texlive-elmath"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ncclatex)
+#. description(texlive-specs-g:texlive-elmath-doc)
#, fuzzy
-msgid "An extended general-purpose class"
-msgstr "Hardwarová knihovna"
+msgid "This package includes the documentation for texlive-elmath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pdftex)
+#. summary(texlive-specs-g:texlive-elpres)
+#, fuzzy
+msgid "A simple class for electronic presentations"
+msgstr "Aplikace pro tvorbu prezentací v KDE"
+
+#. description(texlive-specs-g:texlive-elpres)
msgid ""
-"An extension of TeX which can be configured to directly generate PDF documents instead of DVI. All current free TeX distributionsm including TeX live, MacTeX and MiKTeX include pdfTeX (Plain TeX) and pdfLaTeX (LaTeX). ConTeXt was designed around use of pdfTeX (though it is now migrating towards LuaTeX).\n"
+"Elpres is a simple class for electronic presentations to be shown on screen or a beamer. Elpres is derived from article.cls and may be used with LaTeX or pdfLaTeX.\n"
"\n"
-"date: 2011-11-09 14:33:34 +0000"
+"date: 2012-02-22 23:03:38 +0000"
msgstr ""
-#. description(texlive-pdfscreen)
-msgid ""
-"An extension of the hyperref package to provide a screen-based document design. This package helps to generate pdf documents that are readable on screen and will fit the screen's aspect ratio. Also it can be used with various options to produce regular print versions of the same document without any extra effort.\n"
-"\n"
-"date: 2012-07-18 18:44:29 +0000"
+#. summary(texlive-specs-g:texlive-elpres-doc)
+#, fuzzy
+msgid "Documentation for texlive-elpres"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-elpres-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-elpres"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-elsarticle)
+msgid "Class for articles for submission to Elsevier journals"
msgstr ""
-#. description(texlive-teubner)
+#. description(texlive-specs-g:texlive-elsarticle)
msgid ""
-"An extension to babel greek option for typesetting classical Greek with a philological approach. The package works with the author's greek fonts using the 'Lispiakos' font shape derived from that of the fonts used in printers' shops in Lispia. The package name honours the publisher B.G. Teubner Verlaggesellschaft whose Greek text publications are of high quality.\n"
+"The class is for typeset journal articles, is accepted for submitted articles, both in Elsevier's electronic submission system and elsewhere.\n"
"\n"
-"date: 2013-05-28 22:49:00 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xskak)
-msgid "An extension to the skak package for chess typesetting"
-msgstr ""
+#. summary(texlive-specs-g:texlive-elsarticle-doc)
+#, fuzzy
+msgid "Documentation for texlive-elsarticle"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pstricks)
-msgid ""
-"An extensive collection of macros for generating PostScript that is usable with most TeX macro formats, including Plain TeX, LaTeX, AMS-TeX, and AMS-LaTeX. Included are macros for colour, graphics, pie charts, rotation, trees and overlays. It has many special features, including a wide variety of graphics (picture drawing) macros, with a flexible interface and with colour support. There are macros for colouring or shading the cells of tables. The package pstricks-add contains bug-fixes and additions for pstricks (among other things). PSTricks uses PostScript \\special commands, which are not supported by PDF(La)TeX. This limitation may be overcome by using either the pst-pdf or the pdftricks package, to generate a PDF inclusion from a PSTricks diagram.\n"
-"\n"
-"date: 2013-05-21 19:04:45 +0000"
+#. description(texlive-specs-g:texlive-elsarticle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-elsarticle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-elteikthesis)
+msgid "Thesis class for ELTE University Informatics wing"
msgstr ""
-#. description(texlive-universa)
+#. description(texlive-specs-g:texlive-elteikthesis)
msgid ""
-"An implementation of the universal font by Herbert Bayer of the Bauhaus school. The MetaFont sources of the fonts, and their LaTeX support, are all supplied in a LaTeX documented source (.dtx) file.\n"
+"This is not an official University class, and has not been approved by the University.\n"
"\n"
-"date: 2008-11-02 00:06:10 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-metafont-beginners)
-msgid "An introductory tutorial for Metafont"
-msgstr ""
+#. summary(texlive-specs-g:texlive-elteikthesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-elteikthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texbytopic)
-msgid ""
-"An invaluable book, originally published by Addison-Wesley (who have released their copyright). The book describes itself as \"a TeXnician's reference\", and covers the way TeX (the engine) works in as much detail as most ordinary TeX programmers will ever need to know.\n"
-"\n"
-"date: 2008-08-24 08:50:19 +0000"
+#. description(texlive-specs-g:texlive-elteikthesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-elteikthesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-eltex)
+msgid "Simple circuit diagrams in LaTeX picture mode"
msgstr ""
-#. description(texlive-metafont-beginners)
+#. description(texlive-specs-g:texlive-eltex)
msgid ""
-"An old introduction to the use of Metafont, that has stood the test of time. It focuses on using the program, rather than designing fonts, but does offer advice about understanding errors in other people's fonts.\n"
+"The macros enable the user to draw simple circuit diagrams in the picture environment, with no need of special resources. The macros are appropriate for drawing for school materials. The circuit symbols accord to the various parts of the standard IEC 617.\n"
"\n"
-"date: 2012-05-23 14:10:32 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tex-overview)
-msgid "An overview of the development of TeX"
-msgstr ""
+#. summary(texlive-specs-g:texlive-eltex-doc)
+#, fuzzy
+msgid "Documentation for texlive-eltex"
+msgstr "Dokumentace pro adaptx"
-#. summary(vollkorn-fonts)
-msgid "An serif font for everyday use"
-msgstr ""
+#. description(texlive-specs-g:texlive-eltex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eltex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texloganalyser)
-msgid "Analyse TeX logs"
+#. summary(texlive-specs-g:texlive-elvish)
+msgid "Fonts for typesetting Tolkien Elvish scripts"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-animals)
-msgid "Animals stamps stamps collection for Tux Paint"
+#. description(texlive-specs-g:texlive-elvish)
+msgid ""
+"The bundle provides fonts for Cirth (cirth.mf, etc.) and for Tengwar (teng10.mf). The Tengwar fonts are supported by macros in teng.tex, or by the (better documented) tengtex package.\n"
+"\n"
+"date: 2014-04-26 17:51:19 +0000"
msgstr ""
-#. summary(texlive-textopo)
-msgid "Annotated membrane protein topology plots"
-msgstr ""
+#. summary(texlive-specs-g:texlive-elvish-doc)
+#, fuzzy
+msgid "Documentation for texlive-elvish"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-poltawski)
-msgid "Antykwa Poltawskiego Family of Fonts"
-msgstr ""
+#. description(texlive-specs-g:texlive-elvish-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-elvish"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(tomcat)
-msgid "Apache Servlet/JSP Engine, RI for Servlet 3.0/JSP 2.2 API"
+#. summary(texlive-specs-g:texlive-emarks)
+msgid "Named mark registers with e-TeX"
msgstr ""
-#. summary(tomcat:tomcat-jsp-2_2-api)
-msgid "Apache Tomcat JSP API implementation classes"
+#. description(texlive-specs-g:texlive-emarks)
+msgid ""
+"E-TeX provides 32 768 mark registers; using this facility is far more comfortable than LaTeX tricks with \\markright, \\markboth, \\leftmark and \\rightmark. The package provides two commands for marking: \\marksthe and \\marksthecs, which have * forms which disable expansion; new mark registers are allocated as needed. Syntax is closely modelled on the \\marks primitive. Four commands are provided for retrieving the marks registers' content: \\thefirstmarks, \\thebotmarks, thetopmarks and \\getthemarks; and the command \\ifmarksequal is available for comparing the content of marks registers. The package requires an e-TeX-enabled engine, and the etex package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tomcat:tomcat-servlet-3_0-api)
-msgid "Apache Tomcat Servlet API implementation classes"
-msgstr ""
+#. summary(texlive-specs-g:texlive-emarks-doc)
+#, fuzzy
+msgid "Documentation for texlive-emarks"
+msgstr "Dokumentace pro adaptx"
-#. summary(tomcat:tomcat-jsvc)
-msgid "Apache jsvc wrapper for Apache Tomcat as separate service"
-msgstr ""
+#. description(texlive-specs-g:texlive-emarks-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-emarks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-parselines)
-msgid "Apply a macro to each line of an environment"
+#. summary(texlive-specs-g:texlive-embedall)
+msgid "Embed source files into the generated PDF"
msgstr ""
-#. summary(texlive-type1cm)
-msgid "Arbitrary size font selection in LaTeX"
+#. description(texlive-specs-g:texlive-embedall)
+msgid ""
+"The package provides a means of storing a project, without losing anything. It uses the embedfile package to attach to the generated PDF all files used in creating your project. In particular, it can embed images, external TeX files, external codes and\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(votca-csg:votca-csg-common)
-msgid "Architecture independent data files for VOTCA CSG"
-msgstr ""
+#. summary(texlive-specs-g:texlive-embedall-doc)
+#, fuzzy
+msgid "Documentation for texlive-embedall"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-plates)
-msgid "Arrange for \"plates\" sections of documents"
+#. description(texlive-specs-g:texlive-embedall-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-embedall"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-embrac)
+msgid "Upright brackets in emphasised text"
msgstr ""
-#. description(texlive-quoting)
+#. description(texlive-specs-g:texlive-embrac)
msgid ""
-"As an alternative to the LaTeX standard environments quotation and quote, the package provides a consolidated environment for displayed text. First-line indentation may be activated by adding a blank line before the quoting environment. A key-value interface (using kvoptions) allows the user to configure font properties and spacing and to control orphans within and after the environment.\n"
+"The package redefines the commands \\emph and \\textit so that parentheses and square brackets are typeset in an upright font in their arguments. The package requires expl3 from the l3kernel bundle, and xparse and l3keys2e from the l3packages bundle.\n"
"\n"
-"date: 2012-02-22 09:43:42 +0000"
+"date: 2014-05-08 12:35:28 +0000"
msgstr ""
-#. summary(texlive-physymb)
-msgid "Assorted macros for Physicists"
-msgstr ""
+#. summary(texlive-specs-g:texlive-embrac-doc)
+#, fuzzy
+msgid "Documentation for texlive-embrac"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-support)
-msgid "Assorted support files for use with PStricks"
-msgstr ""
+#. description(texlive-specs-g:texlive-embrac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-embrac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikzorbital)
-msgid "Atomic and molecular orbitals using TiKZ"
+#. summary(texlive-specs-g:texlive-emp)
+msgid "\"Encapsulate\" MetaPost figures in a document"
msgstr ""
-#. description(texlive-tikzorbital)
+#. description(texlive-specs-g:texlive-emp)
msgid ""
-"Atomic s, p and d orbitals may be drawn, as well as molecular orbital diagrams.\n"
+"Emp is a package for encapsulating MetaPost figures in LaTeX: the package provides environments where you can place MetaPost commands, and means of using that code as fragments for building up figures to include in your document. So, with emp, the procedure is to run your document with LaTeX, run MetaPost, and then complete running your document in the normal way. Emp is therefore useful for keeping illustrations in synchrony with the text. It also frees you from inventing descriptive names for PostScript files that fit into the confines of file system conventions.\n"
"\n"
-"date: 2012-12-17 19:44:22 +0000"
+"date: 2013-04-03 09:13:43 +0000"
msgstr ""
-#. summary(texlive-superiors)
-msgid "Attach superior figures to a font family"
+#. summary(texlive-specs-g:texlive-emp-doc)
+#, fuzzy
+msgid "Documentation for texlive-emp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-emp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-emp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-emptypage)
+msgid "Make empty pages really empty"
msgstr ""
-#. description(texlive-marginfix)
+#. description(texlive-specs-g:texlive-emptypage)
msgid ""
-"Authors using LaTeX to typeset books with significant margin material often run into the problem of long notes running off the bottom of the page. A typical workaround is to insert \\vshift commands by hand, but this is a tedious process that is invalidated when pagination changes. Another workaround is memoir's \\sidebar function, but this can be unsatisfying for short textual notes, and standard marginpars cannot be mixed with sidebars. This package implements a solution to make marginpars \"just work\" by keeping a list of floating inserts and arranging them intelligently in the output routine.\n"
+"This package prevents page numbers and headings from appearing on empty pages.\n"
"\n"
-"date: 2010-09-10 21:39:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lua2dox)
+#. summary(texlive-specs-g:texlive-emptypage-doc)
#, fuzzy
-msgid "Auto-documentation of lua code"
+msgid "Documentation for texlive-emptypage"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-listings-ext)
-msgid "Automated input of source"
-msgstr ""
+#. description(texlive-specs-g:texlive-emptypage-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-emptypage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-subfigmat)
-msgid "Automates layout when using the subfigure package"
+#. summary(texlive-specs-g:texlive-emulateapj)
+msgid "Produce output similar to that of APJ"
msgstr ""
-#. summary(texlive-xeindex)
-msgid "Automatic index generation for XeLaTeX"
+#. description(texlive-specs-g:texlive-emulateapj)
+msgid ""
+"A LaTeX class (based on current RevTeX) to produce preprints with the page layout similar to that of the Astrophysical Journal.\n"
+"\n"
+"date: 2012-12-05 12:33:41 +0000"
msgstr ""
-#. summary(texlive-xpinyin)
-msgid "Automatically add pinyin to Chinese characters"
+#. summary(texlive-specs-g:texlive-emulateapj-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-emulateapj"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-emulateapj-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-emulateapj"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-g:texlive-enctex)
+msgid "A TeX extension that translates input on its way into TeX"
msgstr ""
-#. description(texlive-tocbibind)
+#. description(texlive-specs-g:texlive-enctex)
msgid ""
-"Automatically adds the bibliography and/or the index and/or the contents, etc., to the Table of Contents listing.\n"
+"EncTeX is (another) tex extension, written at the change-file level. It provides means of translating input on the way into TeX. It allows, for example, translation of multibyte sequences, such as utf-8 encoding.\n"
"\n"
-"date: 2010-10-13 09:41:41 +0000"
+"date: 2014-05-09 07:19:54 +0000"
msgstr ""
-#. summary(texlive-nowidow)
-msgid "Avoid widows"
+#. summary(texlive-specs-g:texlive-enctex-doc)
+#, fuzzy
+msgid "Documentation for texlive-enctex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-g:texlive-enctex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-enctex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-encxvlna)
+msgid "Insert nonbreakable spaces, using encTeX"
msgstr ""
-#. description(texlive-serbian-date-lat)
+#. description(texlive-specs-h:texlive-encxvlna)
msgid ""
-"Babel defines dates for Serbian texts, in Latin script. The style it uses does not match current practices. The present package defines a \\date command that solves the problem.\n"
+"The package provides tools for inserting nonbreakable spaces after nonsyllabic prepositions and single letter conjunctions as required by Czech and Slovak typographical rules. It is implemented using encTeX and provides files both for plain TeX and LaTeX. The LaTeX solution tries to avoid conflicts with other packages.\n"
"\n"
-"date: 2011-06-24 08:29:05 +0000"
+"date: 2014-05-17 18:01:25 +0000"
msgstr ""
-#. summary(texlive-turkmen)
+#. summary(texlive-specs-h:texlive-encxvlna-doc)
#, fuzzy
-msgid "Babel support for Turkmen"
-msgstr "VPN podpora pro Turnpike."
+msgid "Documentation for texlive-encxvlna"
+msgstr "Dokumentace pro adaptx"
-#. summary(tweets2pdf)
-msgid "Back up your twitter life into an elegent PDF book"
-msgstr ""
+#. description(texlive-specs-h:texlive-encxvlna-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-encxvlna"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(votca-csg:votca-csg-bash)
-msgid "Bash completion for votca"
+#. summary(texlive-specs-h:texlive-endfloat)
+msgid "Move floats to the end, leaving markers where they belong"
msgstr ""
-#. summary(texlive-luatexbase)
-msgid "Basic resource management for LuaTeX code"
+#. description(texlive-specs-h:texlive-endfloat)
+msgid ""
+"Place all floats on pages by themselves at the end of the document, optionally leaving markers like \"[Figure 3 about here]\" in the text near to where the figure (or table) would normally have occurred. Float types figure and table are recognised by the package, unmodified. Since several packages define other types of float, it is possible to register these float types with endfloat.\n"
+"\n"
+"date: 2011-12-31 00:27:20 +0000"
msgstr ""
-#. summary(texlive-filesystem:texlive-scheme-basic)
-msgid "Basic scheme (plain and latex)"
+#. summary(texlive-specs-h:texlive-endfloat-doc)
+#, fuzzy
+msgid "Documentation for texlive-endfloat"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-endfloat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-endfloat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-endheads)
+msgid "Running headers of the form \"Notes to pp.xx-yy\""
msgstr ""
-#. description(texlive-texware)
+#. description(texlive-specs-h:texlive-endheads)
msgid ""
-"Basic utitility programs, comprising: - dvitype, which converts a TeX output (DVI) file to a plain text file (see also the DVI Text Language suite); - pooltype, which converts a TeX-suite program's \"pool\" (string) file into human-readable form; and - tftopl and pltotf, which convert TeX Font Metric (TFM) file to human readable Property List (PL) files and vice versa.\n"
+"Endheads provides running headers of the form \"Notes to pp. xx- yy\" for endnotes sections. It also enables one to reset the endnotes counter, and put a line marking the chapter change in the endnotes, at the beginning of every chapter. Endheads requires the fancyhdr, needspace, ifthen, and endnotes packages.\n"
"\n"
-"date: 2012-06-27 20:19:02 +0000"
+"date: 2013-10-18 08:55:45 +0000"
msgstr ""
-#. summary(xmlgraphics-batik:xmlgraphics-batik-squiggle)
-msgid "Batik SVG browser"
-msgstr ""
+#. summary(texlive-specs-h:texlive-endheads-doc)
+#, fuzzy
+msgid "Documentation for texlive-endheads"
+msgstr "Dokumentace pro adaptx"
-#. summary(xmlgraphics-batik:xmlgraphics-batik-ttf2svg)
-msgid "Batik SVG font converter"
-msgstr ""
+#. description(texlive-specs-h:texlive-endheads-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-endheads"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xmlgraphics-batik:xmlgraphics-batik-svgpp)
-msgid "Batik SVG pretty printer"
+#. summary(texlive-specs-h:texlive-endiagram)
+msgid "Easy creation of potential energy curve diagrams"
msgstr ""
-#. summary(xmlgraphics-batik:xmlgraphics-batik-rasterizer)
-msgid "Batik SVG rasterizer"
+#. description(texlive-specs-h:texlive-endiagram)
+msgid ""
+"The package provides the facility of drawing potential energy curve diagrams with just a few simple commands. The package cannot (yet) be considered stable.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(xmlgraphics-batik:xmlgraphics-batik-slideshow)
-msgid "Batik SVG slideshow"
-msgstr ""
+#. summary(texlive-specs-h:texlive-endiagram-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-endiagram"
+msgstr "Dokumentace pro digiKam"
-#. description(xmlgraphics-batik:xmlgraphics-batik-slideshow)
-msgid "Batik SVG slideshow."
-msgstr ""
+#. description(texlive-specs-h:texlive-endiagram-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-endiagram"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tabls)
-msgid "Better vertical spacing in tables and arrays"
+#. summary(texlive-specs-h:texlive-endnotes)
+msgid "Place footnotes at the end"
msgstr ""
-#. summary(texlive-oscola)
-msgid "BibLaTeX style for the Oxford Standard for the Citation of Legal Authorities"
+#. description(texlive-specs-h:texlive-endnotes)
+msgid ""
+"Accumulates notes (using the \\endnote command, which can be used as a replacement for \\footnote), and places them at the end of the section, chapter or document.\n"
+"\n"
+"date: 2012-06-14 15:25:45 +0000"
msgstr ""
-#. summary(texlive-ijqc)
-msgid "BibTeX style file for the Intl. J. Quantum Chem"
-msgstr ""
+#. summary(texlive-specs-h:texlive-endnotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-endnotes"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-vak)
-msgid "BibTeX style for Russian Theses, books, etcetera"
-msgstr ""
+#. description(texlive-specs-h:texlive-endnotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-endnotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jneurosci)
-msgid "BibTeX style for the Journal of Neuroscience"
+#. summary(texlive-specs-h:texlive-engpron)
+msgid "Helps to type the pronunciation of English words"
msgstr ""
-#. summary(texlive-perception)
-msgid "BibTeX style for the journal Perception"
+#. description(texlive-specs-h:texlive-engpron)
+msgid ""
+"This package provides macros beginning with the 'PS' character, made active, which enable us to write the British or American English pronunciation as one can find it in the 'English Pronouncing Dictionary' by Daniel Jones. There is an option to typeset the pronunciation in the style of Harrap's dictionary.\n"
+"\n"
+"date: 2012-02-10 17:22:03 +0000"
msgstr ""
-#. summary(texlive-rsc)
-msgid "BibTeX style for use with RSC journals"
-msgstr ""
+#. summary(texlive-specs-h:texlive-engpron-doc)
+#, fuzzy
+msgid "Documentation for texlive-engpron"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-vancouver)
-msgid "Bibliographic style file for Biomedical Journals"
+#. description(texlive-specs-h:texlive-engpron-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-engpron"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-engrec)
+msgid "Enumerate with lower- or uppercase Greek letters"
msgstr ""
-#. summary(texlive-sort-by-letters)
-msgid "Bibliography styles for alphabetic sorting"
+#. description(texlive-specs-h:texlive-engrec)
+msgid ""
+"This package provides two macros \\engrec and \\EnGrec to convert number arguments to lower case or upper case greek letters. They have the syntax of \\alph, i.e. \\engrec{a_counter}, \\EnGrec{a_counter}. Options are provided to work with the upgreek and fourier packages. Requires amstext.\n"
+"\n"
+"date: 2012-01-23 14:27:59 +0000"
msgstr ""
-#. summary(texlive-pnas2009)
+#. summary(texlive-specs-h:texlive-engrec-doc)
#, fuzzy
-msgid "Bibtex style for PNAS"
-msgstr "Styl Thin Keramik pro KDE"
+msgid "Documentation for texlive-engrec"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-oubraces)
-msgid "Braces over and under a formula"
-msgstr ""
+#. description(texlive-specs-h:texlive-engrec-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-engrec"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xtab)
-msgid "Break tables across pages"
+#. summary(texlive-specs-h:texlive-engtlc)
+msgid "Support for users in Telecommunications Engineering"
msgstr ""
-#. summary(texlive-webguide)
-msgid "Brief Guide to LaTeX Tools for Web publishing"
+#. description(texlive-specs-h:texlive-engtlc)
+msgid ""
+"The package provides a wide range of abbreviations for terms used in Telecommunications Engineering.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-bufexplorer)
-msgid "Buffer Explorer / Browser"
-msgstr ""
+#. summary(texlive-specs-h:texlive-engtlc-doc)
+#, fuzzy
+msgid "Documentation for texlive-engtlc"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-ltabptch)
-msgid "Bug fix for longtable"
+#. description(texlive-specs-h:texlive-engtlc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-engtlc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-enigma)
+msgid "Encrypt documents with a three rotor Enigma"
msgstr ""
-#. summary(texlive-mylatexformat)
-msgid "Build a format based on the preamble of a LaTeX file"
+#. description(texlive-specs-h:texlive-enigma)
+msgid ""
+"The package provides historical encryption (Enigma cipher) for LuaTeX-based formats.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lshort-bulgarian)
+#. summary(texlive-specs-h:texlive-enigma-doc)
#, fuzzy
-msgid "Bulgarian translation of the \"Short Introduction to LaTeX2e\""
-msgstr "Bulharské překlady pro KOffice"
+msgid "Documentation for texlive-enigma"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-eucl-translation-bg)
+#. description(texlive-specs-h:texlive-enigma-doc)
#, fuzzy
-#| msgid "Bulgarian translations for KOffice"
-msgid "Bulgarian translation of the pst-eucl documentation"
-msgstr "Bulharské překlady pro KOffice"
+msgid "This package includes the documentation for texlive-enigma"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-qstest)
-msgid "Bundle for unit tests and pattern matching"
-msgstr ""
+#. summary(texlive-specs-h:texlive-enotez)
+#, fuzzy
+msgid "Support for end-notes"
+msgstr "České překlady pro KDE"
-#. summary(texlive-toptesi)
-msgid "Bundle of files for typsetting theses"
-msgstr ""
-
-#. description(texlive-Tabbing)
+#. description(texlive-specs-h:texlive-enotez)
msgid ""
-"By default, some of the tabbing environment's commands clash with default accent commands; LaTeX provides the odd commands \\a', etc., to deal with the clash. The package offers a variant of the tabbing environment which does not create this difficulty, so that users need not learn two sets of accent commands.\n"
+"The package allows nested endnotes, supports hyperref and provides means for easy customization of the list of notes. The package requires the expl3 bundle and packages from the LaTeX 3 'package set'.\n"
"\n"
-"date: 2010-02-14 10:55:47 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tabularcalc)
-msgid "Calculate formulas in a tabular environment"
-msgstr ""
+#. summary(texlive-specs-h:texlive-enotez-doc)
+#, fuzzy
+msgid "Documentation for texlive-enotez"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-inversepath)
-msgid "Calculate inverse file paths"
-msgstr ""
+#. description(texlive-specs-h:texlive-enotez-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-enotez"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xlop)
-msgid "Calculates and displays arithmetic operations"
+#. summary(texlive-specs-h:texlive-enumitem)
+msgid "Control layout of itemize, enumerate, description"
msgstr ""
-#. summary(vim-plugins:vim-plugin-calendar)
-msgid "Calendar for vim"
-msgstr ""
-
-#. description(texlive-typehtml)
+#. description(texlive-specs-h:texlive-enumitem)
msgid ""
-"Can handle almost all of HTML2, and most of the math fragment of the draft HTML3.\n"
+"This package provides user control over the layout of the three basic list environments: enumerate, itemize and description. It supersedes both enumerate and mdwlist (providing well- structured replacements for all their funtionality), and in addition provides functions to compute the layout of labels, and to 'clone' the standard environments, to create new environments with counters of their own.\n"
"\n"
-"date: 2010-02-23 15:16:11 +0000"
+"date: 2011-11-22 16:17:59 +0000"
msgstr ""
-#. summary(texlive-textcase)
-msgid "Case conversion ignoring mathematics, etcetera"
+#. summary(texlive-specs-h:texlive-enumitem-doc)
+#, fuzzy
+msgid "Documentation for texlive-enumitem"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-h:texlive-enumitem-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-enumitem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-enumitem-zref)
+msgid "Extended references to items for enumitem package"
msgstr ""
-#. description(texlive-romanneg)
+#. description(texlive-specs-h:texlive-enumitem-zref)
msgid ""
-"Causes the page numbers in the DVI file (as defined by \\count0) to be negative when roman pagenumbering is in effect.\n"
+"The package is a companion for the enumitem package; it makes it possible to reference any item in lists formatted by enumitem lists, viz., enumerated, itemize and description lists, and any list defined (or customised) with \\newlist or \\setlist. References may be typeset differently with options/properties and even arbitrary text. With hyperref, anchors are added for each item to enable hyperlinks within the document or even to external documents. Three schemes are provided to make reference names (including the standard \\label command).\n"
"\n"
-"date: 2010-10-13 10:13:38 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-varisize)
-msgid "Change font size in Plain TeX"
-msgstr ""
+#. summary(texlive-specs-h:texlive-enumitem-zref-doc)
+#, fuzzy
+msgid "Documentation for texlive-enumitem-zref"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-outliner)
-msgid "Change section levels easily"
-msgstr ""
+#. description(texlive-specs-h:texlive-enumitem-zref-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-enumitem-zref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-patchcmd)
-msgid "Change the definition of an existing command"
+#. summary(texlive-specs-h:texlive-envbig)
+msgid "Printing addresses on envelopes"
msgstr ""
-#. summary(texlive-MemoirChapStyles)
-msgid "Chapter styles in memoir class"
+#. description(texlive-specs-h:texlive-envbig)
+msgid ""
+"A simple package, that prints both 'from' and 'to' addresses.\n"
+"\n"
+"date: 2012-06-14 15:41:33 +0000"
msgstr ""
-#. summary(texlive-tex-font-errors-cheatsheet)
-msgid "Cheat sheet outlining the most common TeX font errors"
-msgstr ""
+#. summary(texlive-specs-h:texlive-envbig-doc)
+#, fuzzy
+msgid "Documentation for texlive-envbig"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-refcheck)
-msgid "Check references (in figures, table, equations, etc)"
-msgstr ""
+#. description(texlive-specs-h:texlive-envbig-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-envbig"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-labelcas)
-msgid "Check the existence of labels, and fork accordingly"
+#. summary(texlive-specs-h:texlive-environ)
+msgid "A new interface for environments in LaTeX"
msgstr ""
-#. summary(texlive-r_und_s)
-msgid "Chemical hazard codes"
+#. description(texlive-specs-h:texlive-environ)
+msgid ""
+"The package provides the \\collect@body command (as in amsmath), as well as a \\long version \\Collect@Body, for collecting the body text of an environment. These commands are used to define a new author interface to creating new environments. For example: \\NewEnviron{test} wraps the entire environment body in square brackets, doing the right thing in ignoring leading and trailing spaces.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(wang-fonts)
-msgid "Chinese (Unicode) TrueType fonts by Dr"
-msgstr ""
+#. summary(texlive-specs-h:texlive-environ-doc)
+#, fuzzy
+msgid "Documentation for texlive-environ"
+msgstr "Dokumentace pro adaptx"
-#. description(wang-fonts)
-msgid "Chinese (Unicode) TrueType fonts by Dr. Hann-Tzong Wang"
-msgstr ""
+#. description(texlive-specs-h:texlive-environ-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-environ"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latex-notes-zh-cn)
-msgid "Chinese Introduction to TeX and LaTeX"
+#. summary(texlive-specs-h:texlive-envlab)
+msgid "Addresses on envelopes or mailing labels"
msgstr ""
-#. summary(texlive-uni-wtal-lin)
-msgid "Citation style for linguistic studies at the University of Wuppertal"
+#. description(texlive-specs-h:texlive-envlab)
+msgid ""
+"A LaTeX package for producing mailing envelopes and labels, including barcodes and address formatting according to the US Postal Service rules. Redefines the standard \\makelabels command of the LaTeX letter documentclass.\n"
+"\n"
+"date: 2012-04-03 16:17:17 +0000"
msgstr ""
-#. summary(texlive-inlinebib)
-msgid "Citations in footnotes"
-msgstr ""
+#. summary(texlive-specs-h:texlive-envlab-doc)
+#, fuzzy
+msgid "Documentation for texlive-envlab"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-jurarsp)
-msgid "Citations of judgements and official documents in (German) juridical documents"
-msgstr ""
+#. description(texlive-specs-h:texlive-envlab-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-envlab"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-stru)
-msgid "Civil engineering diagrams, using pstricks"
+#. summary(texlive-specs-h:texlive-epigrafica)
+msgid "A Greek and Latin font"
msgstr ""
-#. description(texlive-iso10303)
+#. description(texlive-specs-h:texlive-epigrafica)
msgid ""
-"Class and package files building on iso for typesetting the ISO 10303 (STEP) standards. Standard documents prepared using these packages have been published by ISO.\n"
+"Epigrafica is forked from the development of the MgOpen font Cosmetica, which is a similar design to Optima and includes Greek. Development has been supported by the Laboratory of Digital Typography and Mathematical Software, of the Department of Mathematics of the University of the Aegean, Greece.\n"
"\n"
-"date: 2007-01-09 13:09:22 +0000"
+"date: 2014-04-26 08:32:59 +0000"
msgstr ""
-#. summary(texlive-jmlr)
-msgid "Class files for the Journal of Machine Learning Research"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epigrafica-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-epigrafica"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-lps)
-msgid "Class for \"Logic and Philosophy of Science\""
-msgstr ""
+#. description(texlive-specs-h:texlive-epigrafica-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epigrafica"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-matc3mem)
-msgid "Class for MatematicaC3 textbooks"
+#. summary(texlive-specs-h:texlive-epigrafica-fonts)
+msgid "Severed fonts for texlive-epigrafica"
msgstr ""
-#. summary(texlive-msu-thesis)
-msgid "Class for Michigan State University Master's and PhD theses"
+#. description(texlive-specs-h:texlive-epigrafica-fonts)
+msgid "The separated fonts package for texlive-epigrafica"
msgstr ""
-#. summary(texlive-onrannual)
-msgid "Class for Office of Naval Research Ocean Battlespace Sensing annual report"
+#. summary(texlive-specs-h:texlive-epigram)
+msgid "Display short quotations"
msgstr ""
-#. summary(texlive-ryethesis)
-msgid "Class for Ryerson Unversity Graduate School requirements"
+#. description(texlive-specs-h:texlive-epigram)
+msgid ""
+"The package determines (on the basis of the width of the text of the epigram, laid out on a single line) whether to produce a line or a displayed paragraph.\n"
+"\n"
+"date: 2012-07-10 19:25:56 +0000"
msgstr ""
-#. summary(texlive-uiucredborder)
-msgid "Class for UIUC thesis red-bordered forms"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epigraph)
+#, fuzzy
+#| msgid "A GNU package for creating portable C++ program"
+msgid "A package for typesetting epigraphs"
+msgstr "GNU balík pro tvorbu přenositelných C++ programů"
-#. summary(texlive-uothesis)
-msgid "Class for dissertations and theses at the University of Oregon"
+#. description(texlive-specs-h:texlive-epigraph)
+msgid ""
+"Epigraphs are the pithy quotations often found at the start (or end) of a chapter. Both single epigraphs and lists of epigraphs are catered for. Various aspects are easily configurable.\n"
+"\n"
+"date: 2012-07-10 19:25:56 +0000"
msgstr ""
-#. summary(texlive-papertex)
-msgid "Class for newspapers, etcetera"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epigraph-doc)
+#, fuzzy
+msgid "Documentation for texlive-epigraph"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-nrc)
-msgid "Class for the NRC technical journals"
-msgstr ""
+#. description(texlive-specs-h:texlive-epigraph-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epigraph"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-icsv)
-msgid "Class for typesetting articles for the ICSV conference"
+#. summary(texlive-specs-h:texlive-epiolmec)
+msgid "Typesetting the Epi-Olmec Language"
msgstr ""
-#. summary(texlive-muthesis)
-msgid "Classes for University of Manchester Dept of Computer Science"
-msgstr ""
-
-#. description(texlive-jsclasses)
+#. description(texlive-specs-h:texlive-epiolmec)
msgid ""
-"Classes jsarticle and jsbook are provided, together with packages okumacro, okuverb and morisawa. These classes are designed to work under ASCII Corporation's Japanese TeX system ptex.\n"
+"The package contains all the necessary files to typeset Epi- Olmec \"documents\", in a script used in Southern Middle America until about 500 AD.\n"
"\n"
-"date: 2013-05-20 15:36:30 +0000"
+"date: 2014-04-26 17:51:19 +0000"
msgstr ""
-#. summary(texlive-jsclasses)
-msgid "Classes tailored for use with Japanese"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epiolmec-doc)
+#, fuzzy
+msgid "Documentation for texlive-epiolmec"
+msgstr "Dokumentace pro adaptx"
-#. summary(tuxpaint-stamps:tuxpaint-stamps-clothes)
-msgid "Clothes stamps collection for Tux Paint"
+#. description(texlive-specs-h:texlive-epiolmec-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epiolmec"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-epiolmec-fonts)
+msgid "Severed fonts for texlive-epiolmec"
msgstr ""
-#. summary(texlive-texdirflatten)
-msgid "Collect files related to a LaTeX job in a single directory"
+#. description(texlive-specs-h:texlive-epiolmec-fonts)
+msgid "The separated fonts package for texlive-epiolmec"
msgstr ""
-#. description(texlive-pstricks-add)
+#. summary(texlive-specs-h:texlive-eplain)
+#, fuzzy
+#| msgid "Extended Clipboard"
+msgid "Extended plain tex macros"
+msgstr "Rozšířená schránka"
+
+#. description(texlive-specs-h:texlive-eplain)
msgid ""
-"Collects together examples that have been posted to the pstricks mailing list, together with many additional features for the basic pstricks, pst-plot and pst-node, including: - bugfixes; - new options for the pspicture environment; - arrows; - braces as node connection/linestyle; - extended axes for plots (e.g., logarithm axes); - polar plots; - plotting tangent lines of curves or functions; - solving and printing differential equationd; - box plots; - matrix plots; and - pie charts. The package makes use of PostScript routines provided by pst-math.\n"
+"A powerfuly extended version of the plain format, adding support for bibliographies, tables of contents, enumerated lists, verbatim input of files, numbered equations, tables, two-column output, footnotes, hyperlinks in PDF output and commutative diagrams. Eplain can also load some of the more useful LaTeX packages, notably graphics, graphicx, color, autopict (a package instance of the LaTeX picture code), psfrag, and url.\n"
"\n"
-"date: 2012-09-28 12:00:56 +0000"
+"date: 2013-11-21 20:20:37 +0000"
msgstr ""
-#. summary(texlive-pdftex-def)
+#. summary(texlive-specs-h:texlive-eplain-doc)
#, fuzzy
-msgid "Colour and Graphics support for PDFTeX"
-msgstr "XML podpora pro castor"
+msgid "Documentation for texlive-eplain"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xetex-def)
-msgid "Colour and graphics support for XeTeX"
-msgstr ""
+#. description(texlive-specs-h:texlive-eplain-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eplain"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tcolorbox)
-msgid "Coloured boxes, for LaTeX examples and theorems, etcetera"
+#. summary(texlive-specs-h:texlive-epsdice)
+msgid "A scalable dice \"font\""
msgstr ""
-#. summary(texlive-overpic)
-msgid "Combine LaTeX commands over included graphics"
+#. description(texlive-specs-h:texlive-epsdice)
+msgid ""
+"The epsdice package defines a single command \\epsdice that takes a numeric argument (in the range 1-6), and selects a face image from a file that contains each of the 6 possible die faces. The graphic file is provided in both Encapsulated PostScript and PDF formats.\n"
+"\n"
+"date: 2012-04-27 09:57:13 +0000"
msgstr ""
-#. description(wgetpaste)
-msgid "Command-line interface to communicate with various pastebin services."
-msgstr ""
+#. summary(texlive-specs-h:texlive-epsdice-doc)
+#, fuzzy
+msgid "Documentation for texlive-epsdice"
+msgstr "Dokumentace pro adaptx"
-#. summary(wgetpaste)
-msgid "Command-line interface to various pastebins"
+#. description(texlive-specs-h:texlive-epsdice-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epsdice"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-epsf)
+msgid "Simple macros for EPS inclusion"
msgstr ""
-#. description(texlive-newfile)
+#. description(texlive-specs-h:texlive-epsf)
msgid ""
-"Commands are defined to manage the limited pool of input and output handles provided by TeX. The streams so provided are mapped to various of the LaTeX input and output mechanisms. Some facilities of the verbatim package are also mapped.\n"
+"The original (and now obsolescent) graphics inclusion macros for use with dvips, still widely used by Plain TeX users (in particular). For LaTeX users, the package is nowadays (rather strongly) deprecated in favour of the more sophisticated standard LaTeX graphics bundle of packages. (The graphics bundle is also available to Plain TeX users, via its Plain TeX version.)\n"
"\n"
-"date: 2009-09-03 11:00:14 +0000"
+"date: 2013-09-10 12:43:07 +0000"
msgstr ""
-#. summary(texlive-matc3)
-msgid "Commands for MatematicaC3 textbooks"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epsf-doc)
+#, fuzzy
+msgid "Documentation for texlive-epsf"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-serbian-apostrophe)
-msgid "Commands for Serbian words with apostrophes"
+#. description(texlive-specs-h:texlive-epsf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epsf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-epsincl)
+msgid "Include EPS in MetaPost figures"
msgstr ""
-#. description(texlive-xoptarg)
+#. description(texlive-specs-h:texlive-epsincl)
msgid ""
-"Commands that take an optional argument are not ordinarily expandable; this package allows such commands to be expandable provided they have at least one mandatory argument.\n"
+"The package facilitates including EPS files in MetaPost figures; it makes use of (G)AWK.\n"
"\n"
-"date: 2008-08-24 12:29:08 +0000"
+"date: 2012-07-10 20:47:12 +0000"
msgstr ""
-#. summary(texlive-mathdots)
-msgid "Commands to produce dots in math that respect font size"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epsincl-doc)
+#, fuzzy
+msgid "Documentation for texlive-epsincl"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rec-thy)
-msgid "Commands to typeset recursion theory papers"
-msgstr ""
+#. description(texlive-specs-h:texlive-epsincl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epsincl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xml-commons-apis-bootstrap)
-msgid "Common code for XML projects - bootstrapping package"
+#. summary(texlive-specs-h:texlive-epslatex-fr)
+msgid "French version of \"graphics in LaTeX\""
msgstr ""
-#. summary(texlive-texdiff)
-msgid "Compare documents and produce tagged merge"
-msgstr ""
+#. description(texlive-specs-h:texlive-epslatex-fr)
+#, fuzzy
+msgid ""
+"This is the French translation of epslatex, and describes how to use imported graphics in LaTeX(2e) documents.\n"
+"\n"
+"date: 2013-10-03 12:20:59 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(xorg-x11-libs)
-msgid "Compatibility metapackage for X.Org libraries"
+#. summary(texlive-specs-h:texlive-epspdf)
+msgid "Converter for PostScript, EPS and PDF"
msgstr ""
-#. summary(texlive-standalone)
-msgid "Compile TeX pictures stand-alone or as part of a document"
+#. description(texlive-specs-h:texlive-epspdf)
+msgid ""
+"Epspdf[tk] is a TeXlua script which converts between PostScript or EPS and PDF. It has both a command-line and a GUI interface. Using pdftops (from the xpdf command-line utilities) for round- tripping opens up several new possibilities compared to older similarly-named utilities.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-texmate)
-msgid "Comprehensive chess annotation in LaTeX"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epspdf-doc)
+#, fuzzy
+msgid "Documentation for texlive-epspdf"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-oldlatin)
-msgid "Compute Modern like font with long s"
-msgstr ""
+#. description(texlive-specs-h:texlive-epspdf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epspdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-papermas)
-msgid "Compute the mass of a printed version of a document"
+#. summary(texlive-specs-h:texlive-epspdfconversion)
+msgid "On-the-fly conversion of EPS to PDF"
msgstr ""
-#. summary(texlive-filesystem:texlive-scheme-context)
-msgid "ConTeXt scheme"
+#. description(texlive-specs-h:texlive-epspdfconversion)
+msgid ""
+"The package calls the epstopdf package to convert EPS graphics to PDF, on the fly. It servs as a vehicle for passing conversion options (such as grayscale, prepress or pdfversion) to the epspdf converter.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-version)
-msgid "Conditionally include text"
-msgstr ""
+#. summary(texlive-specs-h:texlive-epspdfconversion-doc)
+#, fuzzy
+msgid "Documentation for texlive-epspdfconversion"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ifplatform)
-msgid "Conditionals to test which platform is being used"
+#. description(texlive-specs-h:texlive-epspdfconversion-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epspdfconversion"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-epstopdf)
+msgid "Convert EPS to 'encapsulated' PDF using GhostScript"
msgstr ""
-#. summary(texlive-idxlayout)
-msgid "Configurable index layout, responsive to KOMA-Script and memoir"
+#. description(texlive-specs-h:texlive-epstopdf)
+msgid ""
+"Epstopdf is a Perl script that converts an EPS file to an 'encapsulated' PDF file (a single page file whose media box is the same as the original EPS's bounding box). The resulting file suitable for inclusion by PDFTeX as an image. The script is adapted to run both on Windows and on Unix-alike systems. The script makes use of Ghostscript for the actual conversion to PDF. It assumes Ghostscript version 6.51 or later, and (by default) suppresses its automatic rotation of pages where most of the text is not horizontal. LaTeX users may make use of the epstopdf package, which will run the epstopdf script \"on the fly\", thus giving the illusion that PDFLaTeX is accepting EPS graphic files.\n"
+"\n"
+"date: 2014-01-17 19:40:07 +0000"
msgstr ""
-#. summary(texlive-xetexconfig)
+#. summary(texlive-specs-h:texlive-epstopdf-doc)
#, fuzzy
-msgid "Configuration files for XeTeX"
-msgstr "Změněné konfigurační soubory pro %s:"
+msgid "Documentation for texlive-epstopdf"
+msgstr "Dokumentace pro adaptx"
-#. summary(yast2-geo-cluster)
-msgid "Configuration of booth"
-msgstr ""
+#. description(texlive-specs-h:texlive-epstopdf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-epstopdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(yast2-cluster)
-msgid "Configuration of cluster"
+#. summary(texlive-specs-h:texlive-eqell)
+msgid "Sympathetically spaced ellipsis after punctuation"
msgstr ""
-#. summary(yast2-iscsi-lio-server)
-msgid "Configuration of iSCSI LIO target"
+#. description(texlive-specs-h:texlive-eqell)
+msgid ""
+"The package provides commands that give a well-spaced ellipsis after !, ?, !? or ?!.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(yast2-iplb)
-msgid "Configuration of iplb"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eqell-doc)
+#, fuzzy
+msgid "Documentation for texlive-eqell"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-quotmark)
-msgid "Consistent quote marks"
-msgstr ""
+#. description(texlive-specs-h:texlive-eqell-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eqell"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-quoting)
-msgid "Consolidated environment for displayed text"
+#. summary(texlive-specs-h:texlive-eqlist)
+msgid "Description lists with equal indentation"
msgstr ""
-#. summary(texlive-scalerel)
-msgid "Constrained scaling and stretching of objects"
+#. description(texlive-specs-h:texlive-eqlist)
+msgid ""
+"This package provides a list environment which sets a description-like list in which the indentation corresponds to the longest item of the list.\n"
+"\n"
+"date: 2012-01-23 14:27:59 +0000"
msgstr ""
-#. summary(texlive-tableaux)
-msgid "Construct tables of signs and variations"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eqlist-doc)
+#, fuzzy
+msgid "Documentation for texlive-eqlist"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-memory)
+#. description(texlive-specs-h:texlive-eqlist-doc)
#, fuzzy
-msgid "Containers for data in LaTeX"
-msgstr "Software pro certifikaci CD"
+msgid "This package includes the documentation for texlive-eqlist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-yafoot)
+#. summary(texlive-specs-h:texlive-eqname)
+msgid "Name tags for equations"
+msgstr ""
+
+#. description(texlive-specs-h:texlive-eqname)
msgid ""
-"Contains three packages: - pfnote to number footnotes per page;\n"
-"- fnpos to control the position of footnotes; and - dblfnote to make footnotes double-columned.\n"
+"The \\eqname command provides a name tag for the current equation, in place of an equation number. The name tag will be picked up by a subsequent \\label command.\n"
"\n"
-"date: 2006-12-16 09:58:44 +0000"
+"date: 2012-07-11 12:19:50 +0000"
msgstr ""
-#. summary(texlive-placeins)
-msgid "Control float placement"
+#. summary(texlive-specs-h:texlive-eqnarray)
+msgid "More generalised equation arrays with numbering"
msgstr ""
-#. summary(texlive-serbian-lig)
-msgid "Control ligatures in Serbian"
+#. description(texlive-specs-h:texlive-eqnarray)
+msgid ""
+"Defines an equationarray environment, that allows more than three columns, but otherwise behaves like LaTeX's eqnarray environment. This environment is similar, in some ways, to the align environment of amsmath. The package requires the array package.\n"
+"\n"
+"date: 2014-05-14 14:12:10 +0000"
msgstr ""
-#. summary(texlive-titling)
-msgid "Control over the typesetting of the \\maketitle command"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eqnarray-doc)
+#, fuzzy
+msgid "Documentation for texlive-eqnarray"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sectsty)
-msgid "Control sectional headers"
-msgstr ""
+#. description(texlive-specs-h:texlive-eqnarray-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eqnarray"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tocloft)
-msgid "Control table of contents, figures, etcetera"
+#. summary(texlive-specs-h:texlive-eqparbox)
+msgid "Create equal-widthed parboxes"
msgstr ""
-#. summary(texlive-underscore)
-msgid "Control the behaviour of \"_\" in text"
-msgstr ""
-
-#. description(texlive-multibibliography)
+#. description(texlive-specs-h:texlive-eqparbox)
msgid ""
-"Conventional standards for bibliography styles impose a forced choice between index and name/year citations, and corresponding references. The package avoids this choice, by providing alphabetic, sequenced, and even chronological orderings of references. Inline citations, that integrate these heterogeneous styles, are also supported (and work with other bibliography packages).\n"
+"LaTeX users sometimes need to ensure that two or more blocks of text occupy the same amount of horizontal space on the page. To that end, the eqparbox package defines a new command, \\eqparbox, which works just like \\parbox, except that instead of specifying a width, one specifies a tag. All eqparboxes with the same tag--regardless of where they are in the document-- will stretch to fit the widest eqparbox with that tag. This simple, equal-width mechanism can be used for a variety of alignment purposes, as is evidenced by the examples in eqparbox's documentation. Various derivatives of \\eqparbox are also provided.\n"
"\n"
-"date: 2013-05-17 10:42:49 +0000"
+"date: 2013-03-16 23:02:27 +0000"
msgstr ""
-#. summary(texlive-ziffer)
-msgid "Conversion of punctuation in maths mode"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eqparbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-eqparbox"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tex4ht)
-msgid "Convert (La)TeX to HTML/XML"
-msgstr ""
+#. description(texlive-specs-h:texlive-eqparbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eqparbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ptex2pdf)
-msgid "Convert Japanese TeX documents to PDF"
+#. summary(texlive-specs-h:texlive-erdc)
+msgid "Style for Reports by US Army Corps of Engineers"
msgstr ""
-#. summary(texlive-numname)
-msgid "Convert a number to its English expression"
+#. description(texlive-specs-h:texlive-erdc)
+msgid ""
+"A class for typesetting Technical Information Reports of the Engineer Research and Development Center, US Army Corps of Engineers. The class was commissioned and paid for by US Army Corps of Engineers, Engineer Research and Development Center, 3909 Halls Ferry Road, Vicksburg, MS 39180-6199.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(virt-v2v)
-msgid "Convert a virtual machine to run on KVM"
-msgstr ""
+#. summary(texlive-specs-h:texlive-erdc-doc)
+#, fuzzy
+msgid "Documentation for texlive-erdc"
+msgstr "Dokumentace pro adaptx"
-#. summary(txt2tags)
-msgid "Converts text files to HTML, XHTML, sgml, LaTeX, man and others"
-msgstr ""
+#. description(texlive-specs-h:texlive-erdc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-erdc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikz-3dplot)
-msgid "Coordinate transformation styles for 3d plotting in TikZ"
-msgstr ""
+#. summary(texlive-specs-h:texlive-errata)
+#, fuzzy
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Error markup for LaTeX documents"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
-#. summary(texlive-tabularborder)
-msgid "Correct index entries for chemical compounds"
+#. description(texlive-specs-h:texlive-errata)
+msgid ""
+"This package provides a simple infrastructure for recording errata in LaTeX documents. This allows the user to maintain an updated version of the document (with all errors corrected) and to automatically generate an errata document highlighting the difference to the published version.\n"
+"\n"
+"date: 2011-09-30 18:51:09 +0000"
msgstr ""
-#. summary(texlive-sansmathaccent)
-msgid "Correct placement of accents in sans-serif maths"
-msgstr ""
+#. summary(texlive-specs-h:texlive-errata-doc)
+#, fuzzy
+msgid "Documentation for texlive-errata"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-totpages)
-msgid "Count pages in a document, and report last page number"
-msgstr ""
+#. description(texlive-specs-h:texlive-errata-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-errata"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texcount)
-msgid "Count words in a LaTeX document"
+#. summary(texlive-specs-h:texlive-es-tex-faq)
+msgid "CervanTeX (Spanish TeX Group) FAQ"
msgstr ""
-#. summary(texlive-ordinalpt)
-msgid "Counters as ordinal numbers in Portuguese"
+#. description(texlive-specs-h:texlive-es-tex-faq)
+msgid ""
+"SGML source, converted LaTeX version, and readable copies of the FAQ from the Spanish TeX users group.\n"
+"\n"
+"date: 2012-07-11 15:40:28 +0000"
msgstr ""
-#. summary(texlive-uadocs)
-msgid "Course texts and masters theses in University of Antwerp style"
+#. summary(texlive-specs-h:texlive-esami)
+msgid "Typeset exams with scrambled questions and answers"
msgstr ""
-#. summary(texlive-pst-eps)
-msgid "Create EPS files from PSTricks figures"
+#. description(texlive-specs-h:texlive-esami)
+msgid ""
+"The package enables the user to typeset exams with multiple choice, open questions and many other types of exercise. Both questions and answers may be randomly distributed within the exam, and the solutions are typeset automatically. Exercises may contain a wide number of random parameters and it is possible to do arithmetical operations on them. The package is localised in Italian, English, French, German, Greek and Spanish.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tkz-orm)
-msgid "Create Object-Role Model (ORM) diagrams,"
-msgstr ""
+#. summary(texlive-specs-h:texlive-esami-doc)
+#, fuzzy
+msgid "Documentation for texlive-esami"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pgf)
+#. description(texlive-specs-h:texlive-esami-doc)
#, fuzzy
-#| msgid "PostScript and PDF Converter"
-msgid "Create PostScript and PDF graphics in TeX"
-msgstr "Konvertor PostScriptu a PDF"
+msgid "This package includes the documentation for texlive-esami"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sty2dtx)
-msgid "Create a .dtx file from a .sty file"
+#. summary(texlive-specs-h:texlive-esdiff)
+msgid "Simplify typesetting of derivatives"
msgstr ""
-#. summary(texlive-image-gallery)
-msgid "Create an overview of pictures from a digital camera or from other sources"
+#. description(texlive-specs-h:texlive-esdiff)
+msgid ""
+"The package makes writing derivatives very easy. It offers macros for derivatives, partial derivatives and multiple derivatives, and allows specification of the point at which the value is calculated. Some typographic alternatives may be selected by package options\n"
+"\n"
+"date: 2012-07-11 14:16:45 +0000"
msgstr ""
-#. summary(texlive-listofsymbols)
+#. summary(texlive-specs-h:texlive-esdiff-doc)
#, fuzzy
-msgid "Create and manipulate lists of symbols"
-msgstr "Fukce pro práci s datem"
+msgid "Documentation for texlive-esdiff"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mp3d)
+#. description(texlive-specs-h:texlive-esdiff-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-esdiff"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-esint)
+#, fuzzy
+#| msgid "Unicode Version of the Computer Modern Fonts"
+msgid "Extended set of integrals for Computer Modern"
+msgstr "Unicode verze písem Computer Modern"
+
+#. description(texlive-specs-h:texlive-esint)
msgid ""
-"Create animations of 3-dimensional objects (such as polyhedra) in MetaPost.\n"
+"The esint package permits access to alternate integral symbols when you're using the Computer Modern fonts. In the original set, several integral symbols are missing, such as \\oiint. Many of these symbols are available in other font sets (pxfonts, txfonts, etc.), but there is no good solution if you want to use Computer Modern. The package provides Metafont source and LaTeX macro support.\n"
"\n"
-"date: 2012-05-25 14:08:07 +0000"
+"date: 2014-04-26 08:32:59 +0000"
msgstr ""
-#. summary(texlive-skeycommand)
-msgid "Create commands using parameters and keyval in parallel"
-msgstr ""
+#. summary(texlive-specs-h:texlive-esint-doc)
+#, fuzzy
+msgid "Documentation for texlive-esint"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tikz-cd)
-msgid "Create commutative diagrams with TikZ"
-msgstr ""
+#. description(texlive-specs-h:texlive-esint-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-esint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texpower)
-msgid "Create dynamic online presentations with LaTeX"
+#. summary(texlive-specs-h:texlive-esint-type1)
+msgid "Font esint10 in Type 1 format"
msgstr ""
-#. summary(texlive-sectionbox)
-msgid "Create fancy boxed ((sub)sub)sections"
+#. description(texlive-specs-h:texlive-esint-type1)
+msgid ""
+"This is Eddie Saudrais's font esint10 in Adobe Type 1 format. The Adobe Type 1 implementation was generated from the original Metafont using mftrace. This distribution does not contain the TFM files that are necessary to use the fonts with TeX; the TFM files can be generated from the Metafont sources obtained by following the instructions in the normal way.\n"
+"\n"
+"date: 2014-04-26 08:32:59 +0000"
msgstr ""
-#. summary(texlive-threeddice)
-msgid "Create images of dice with one, two, or three faces showing, using MetaPost"
-msgstr ""
+#. summary(texlive-specs-h:texlive-esint-type1-doc)
+#, fuzzy
+msgid "Documentation for texlive-esint-type1"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pgf-soroban)
-msgid "Create images of the soroban using TikZ/PGF"
-msgstr ""
+#. description(texlive-specs-h:texlive-esint-type1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-esint-type1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luaindex)
-msgid "Create index using lualatex"
+#. summary(texlive-specs-h:texlive-esint-type1-fonts)
+msgid "Severed fonts for texlive-esint-type1"
msgstr ""
-#. summary(texlive-robustindex)
-msgid "Create index with pagerefs"
+#. description(texlive-specs-h:texlive-esint-type1-fonts)
+msgid "The separated fonts package for texlive-esint-type1"
msgstr ""
-#. summary(texlive-knittingpattern)
-msgid "Create knitting patterns"
+#. summary(texlive-specs-h:texlive-esk)
+msgid "Package to encapsulate Sketch files in LaTeX sources"
msgstr ""
-#. summary(texlive-smalltableof)
-msgid "Create listoffigures etc. in a single chapter"
+#. description(texlive-specs-h:texlive-esk)
+msgid ""
+"The ESK package allows to encapsulate Sketch files in LaTeX sources. This is very useful for keeping illustrations in sync with the text. It also frees the user from inventing descriptive names for new files that fit into the confines of file system conventions. Sketch is a 3D scene description language by Eugene K. Ressler and can generate TikZ and PSTricks code. ESK behaves in a similar fashion to EMP (which encapsulates Metapost files), and was in fact developed from it.\n"
+"\n"
+"date: 2012-07-11 14:16:45 +0000"
msgstr ""
-#. summary(texlive-pgfplots)
-msgid "Create normal/logarithmic plots in two and three dimensions"
-msgstr ""
+#. summary(texlive-specs-h:texlive-esk-doc)
+#, fuzzy
+msgid "Documentation for texlive-esk"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-othello)
-msgid "Create othello boards in LaTeX"
-msgstr ""
+#. description(texlive-specs-h:texlive-esk-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-esk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mychemistry)
-msgid "Create reaction schemes with LaTeX and ChemFig"
+#. summary(texlive-specs-h:texlive-eskd)
+#. summary(texlive-specs-h:texlive-eskdx)
+msgid "Modern Russian typesetting"
msgstr ""
-#. summary(texlive-scalebar)
-msgid "Create scalebars for maps, diagrams or photos"
+#. description(texlive-specs-h:texlive-eskd)
+msgid ""
+"The class offers modern Russian text formatting, in accordance with accepted design standards. Fonts not (apparently) available on CTAN are required for use of the class.\n"
+"\n"
+"date: 2012-03-05 12:28:00 +0000"
msgstr ""
-#. summary(texlive-tikzposter)
-msgid "Create scientific posters using TikZ"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eskd-doc)
+#, fuzzy
+msgid "Documentation for texlive-eskd"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-leaflet)
-msgid "Create small handouts (flyers)"
-msgstr ""
+#. description(texlive-specs-h:texlive-eskd-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eskd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sudoku)
-msgid "Create sudoku grids"
-msgstr ""
-
-#. description(texlive-syntax)
+#. description(texlive-specs-h:texlive-eskdx)
msgid ""
-"Create syntax diagrams using special environments and commands to represent the diagram structure.\n"
+"Eskdx is a collection of LaTeX classes and packages to typeset textual and graphical documents in accordance with Russian (and probably post USSR) standards for designers.\n"
"\n"
-"date: 2009-10-01 17:53:35 +0000"
+"date: 2012-03-05 12:28:00 +0000"
msgstr ""
-#. summary(texlive-tablor)
-msgid "Create tables of signs and of variations"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eskdx-doc)
+#, fuzzy
+msgid "Documentation for texlive-eskdx"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multirow)
-msgid "Create tabular cells spanning multiple rows"
-msgstr ""
+#. description(texlive-specs-h:texlive-eskdx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eskdx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-stubs)
-msgid "Create tear-off stubs at the bottom of a page"
+#. summary(texlive-specs-h:texlive-eso-pic)
+msgid "Add picture commands (or backgrounds) to every page"
msgstr ""
-#. summary(texlive-thumbs)
-msgid "Create thumb indexes"
+#. description(texlive-specs-h:texlive-eso-pic)
+msgid ""
+"The package adds one or more user commands to LaTeX's shipout routine, which may be used to place the output at fixed positions. The grid option may be used to find the correct places.\n"
+"\n"
+"date: 2013-10-10 14:26:27 +0000"
msgstr ""
-#. summary(texlive-thumby)
-msgid "Create thumb indexes for printed books"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eso-pic-doc)
+#, fuzzy
+msgid "Documentation for texlive-eso-pic"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-progress)
-msgid "Creates an overview of a document's state"
-msgstr ""
+#. description(texlive-specs-h:texlive-eso-pic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eso-pic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-venn)
-msgid "Creating Venn diagrams with MetaPost"
+#. summary(texlive-specs-h:texlive-esstix)
+msgid "PostScript versions of the ESSTIX, with macro support"
msgstr ""
-#. summary(texlive-venndiagram)
-msgid "Creating Venn diagrams with TikZ"
+#. description(texlive-specs-h:texlive-esstix)
+msgid ""
+"These fonts represent translation to PostScript Type 1 of the ESSTIX fonts. ESSTIX seem to have been a precursor to the STIX project, and were donated by Elsevier to that project. The accompanying virtual fonts with customized metrics and LaTeX support files allow their use as calligraphic, fraktur and double-struck (blackboard bold) in maths mode.\n"
+"\n"
+"date: 2014-04-26 08:32:59 +0000"
msgstr ""
-#. summary(texlive-mceinleger)
-msgid "Creating covers for music cassettes"
-msgstr ""
+#. summary(texlive-specs-h:texlive-esstix-doc)
+#, fuzzy
+msgid "Documentation for texlive-esstix"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-syntax)
-msgid "Creation of syntax diagrams"
-msgstr ""
+#. description(texlive-specs-h:texlive-esstix-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-esstix"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pdfcrop)
-msgid "Crop PDF graphics"
+#. summary(texlive-specs-h:texlive-esstix-fonts)
+msgid "Severed fonts for texlive-esstix"
msgstr ""
-#. summary(texlive-philex)
-msgid "Cross references for named and numbered environments"
+#. description(texlive-specs-h:texlive-esstix-fonts)
+msgid "The separated fonts package for texlive-esstix"
msgstr ""
-#. description(texlive-persian-bib)
+#. summary(texlive-specs-h:texlive-estcpmm)
+#, fuzzy
+msgid "Style for Munitions Management Project Reports"
+msgstr "Výběry balíčků"
+
+#. description(texlive-specs-h:texlive-estcpmm)
msgid ""
-"Currently 7 files: acm-fa.bst, asa-fa.bst, chicago-fa.bst, ieeetr-fa.bst, plain-fa.bst, plainnat-fa.bst and unsrt-fa.bst are modified for Persian documents prepared with XePersian (which the present package depends on). The Persian .bst files can simultaneously handle both Latin and Persian references. A file cp1256fa.csf is provided for correct sorting of Persian references and three fields LANGUAGE, TRANSLATOR and AUTHORFA are defined.\n"
+"Provides a class which supports typesetting Cost and Performance Reports and Final Reports for Munitions Management Reports, US Environmental Security Technology Certification Program. The class was commissioned and paid for by US Army Corps of Engineers, Engineer Research and Development Center, 3909 Halls Ferry Road, Vicksburg, MS 39180-6199.\n"
"\n"
-"date: 2011-07-10 20:10:07 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mhchem)
+#. summary(texlive-specs-h:texlive-estcpmm-doc)
+#, fuzzy
+msgid "Documentation for texlive-estcpmm"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-estcpmm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-estcpmm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-esvect)
+msgid "Vector arrows"
+msgstr ""
+
+#. description(texlive-specs-h:texlive-esvect)
msgid ""
-"Currently, the mhchem bundle consists of two packages: mhchem and rsphrase. The mhchem package provides two commands: one for typesetting chemical molecular formulae and one for typesetting chemical equations with these formulae. The rsphrase package contains the text of all official Risk and Safety (R and S) Phrases that are used to label chemicals. At the time being, these phrases are available in Danish, English, French, German (current spelling), and Spanish.\n"
+"Write vectors using an arrow which differs from the Computer Modern one. You have the choice between several kinds of arrows. The package consists of the relevant Metafont code and a package to use it.\n"
"\n"
-"date: 2011-06-05 20:15:19 +0000"
+"date: 2014-04-26 08:32:59 +0000"
msgstr ""
-#. summary(texlive-modref)
-msgid "Customisation of cross-references in LaTeX"
-msgstr ""
+#. summary(texlive-specs-h:texlive-esvect-doc)
+#, fuzzy
+msgid "Documentation for texlive-esvect"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lh)
-msgid "Cyrillic fonts that support LaTeX standard encodings"
-msgstr ""
+#. description(texlive-specs-h:texlive-esvect-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-esvect"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lshort-czech)
-msgid "Czech translation of the \"Short Introduction to LaTeX2e\""
+#. summary(texlive-specs-h:texlive-esvect-fonts)
+msgid "Severed fonts for texlive-esvect"
msgstr ""
-#. description(xml-commons:xml-commons-jaxp-1.2-apis)
-msgid "DOM 2 org.w3c.dom and SAX XML 2.0 org.xml.sax processor apis used by several pieces of Apache software. XSLT 1.0. This version includes the JAXP 1.2 APIs -- Java API for XML Processing 1.2, i.e. javax.xml{.parsers,.transform}"
+#. description(texlive-specs-h:texlive-esvect-fonts)
+msgid "The separated fonts package for texlive-esvect"
msgstr ""
-#. summary(texlive-yplan)
-msgid "Daily planner type calendar"
+#. summary(texlive-specs-h:texlive-etaremune)
+msgid "Reverse-counting enumerate environment"
msgstr ""
-#. description(texlive-schulschriften)
+#. description(texlive-specs-h:texlive-etaremune)
msgid ""
-"Das Paket enthalt im wesentlichen die METAFONT-Quellfiles fur die folgenden Schulausgangsschriften: Suetterlinschrift, Deutsche Normalschrift, Lateinische Ausgangsschrift, Schulausgangsschrift, Vereinfachte Ausgangsschrift. Damit ist es moglich, beliebige deutsche Texte in diesen Schreibschriften zu schreiben.\n"
+"The package implements the etaremune environment which is an enumerate environment in which the labels decrease instead of increasing. The package is noticeably more efficient than the revnum package, which uses painfully many counters.\n"
"\n"
-"date: 2012-11-15 12:07:37 +0000"
+"date: 2012-01-23 14:27:59 +0000"
msgstr ""
-#. summary(vegastrike-data)
+#. summary(texlive-specs-h:texlive-etaremune-doc)
#, fuzzy
-#| msgid "Data Files for glest"
-msgid "Data files for Vega Strike"
-msgstr "Datové soubory pro glest"
+msgid "Documentation for texlive-etaremune"
+msgstr "Dokumentace pro adaptx"
-#. description(vegastrike-data)
-msgid "Data files for Vega Strike, a GPL 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt."
-msgstr ""
+#. description(texlive-specs-h:texlive-etaremune-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-etaremune"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-substr)
-msgid "Deal with substrings in strings"
-msgstr ""
+#. summary(texlive-specs-h:texlive-etex)
+#, fuzzy
+#| msgid "An extended plain TeX version (not NTS)"
+msgid "An extended version of TeX, from the NTS project"
+msgstr "Rozšíření obyčejného TeXu (ne NTS)"
-#. summary(zeroinstall-injector)
-msgid "Decentralised cross-distribution software installation"
+#. description(texlive-specs-h:texlive-etex)
+msgid ""
+"An extended version of TeX (which is capable of running as if it were TeX unmodified). E-TeX has been specified by the LaTeX team as the engine for the development of LaTeX 2e, in the immediate future; as a result, LaTeX programmers may (in all current TeX distributions) assume e-TeX functionality. Development versions of e-TeX are to be found in the TeX live source repository.\n"
+"\n"
+"date: 2012-03-09 14:12:11 +0000"
msgstr ""
-#. summary(texlive-rccol)
-msgid "Decimal-centered optionally rounded numbers in tabular"
-msgstr ""
+#. summary(texlive-specs-h:texlive-etex-doc)
+#, fuzzy
+msgid "Documentation for texlive-etex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-makeshape)
-msgid "Declare new PGF shapes"
-msgstr ""
+#. description(texlive-specs-h:texlive-etex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-etex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-robustcommand)
-msgid "Declare robust command, with \\newcommand checks"
+#. summary(texlive-specs-h:texlive-etex-pkg)
+msgid "E-TeX support package"
msgstr ""
-#. summary(texlive-thmbox)
-msgid "Decorate theorem statements"
+#. description(texlive-specs-h:texlive-etex-pkg)
+msgid ""
+"The package provides support for LaTeX documents to use many of the extensions offered by e-TeX; in particular, it modifies LaTeX's register allocation macros to make use of the extended register range. The etextools package provides macros that make more sophisticated use of e-TeX's facilities.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-quotchap)
-msgid "Decorative chapter headings"
-msgstr ""
+#. summary(texlive-specs-h:texlive-etex-pkg-doc)
+#, fuzzy
+msgid "Documentation for texlive-etex-pkg"
+msgstr "Dokumentace pro adaptx"
-#. summary(xfce4-icon-theme)
-msgid "Default Icon Theme for the Xfce Desktop Environment"
-msgstr ""
+#. description(texlive-specs-h:texlive-etex-pkg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-etex-pkg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-perltex)
-msgid "Define LaTeX macros in terms of Perl code"
+#. summary(texlive-specs-h:texlive-etextools)
+msgid "E-TeX tools for LaTeX users and package writers"
msgstr ""
-#. summary(texlive-svgcolor)
-msgid "Define SVG named colours"
+#. description(texlive-specs-h:texlive-etextools)
+msgid ""
+"The package provides many (purely expandable) tools for LaTeX: Extensive list management (csv lists, lists of single tokens/characters, etoolbox lists); purely expandable loops (csvloop, forcsvloop, etc.); conversion (csvtolist, etc.)); addition/deletion (csvadd, listdel, etc.); Expansion and group control: \\expandnext, \\ExpandAfterCmds, \\AfterGroup...; Tests on tokens, characters and control sequences (\\iffirstchar, \\ifiscs, \\ifdefcount, \\@ifchar...); Tests on strings (\\ifstrnum, \\ifuppercase, \\DeclareStringFilter...); Purely expandable macros with options (\\FE@testopt, \\FE@ifstar) or modifiers (\\FE@modifiers); - Some purely expandable numerics (\\interval, \\locinterplin). The package is dependent on the etex and the etoolbox packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xnewcommand)
-msgid "Define \\global and \\protected commands with \\newcommand"
+#. summary(texlive-specs-h:texlive-etextools-doc)
+#, fuzzy
+msgid "Documentation for texlive-etextools"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-etextools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-etextools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-ethiop)
+msgid "LaTeX macros and fonts for typesetting Amharic"
msgstr ""
-#. description(texlive-makebox)
+#. description(texlive-specs-h:texlive-ethiop)
msgid ""
-"Define a \\makebox* command that does the same as a \\makebox command, except that the width is given by a sample text instead of an explicit length measure.\n"
+"Ethiopian language support for the babel package, including a collection of fonts and TeX macros for typesetting the characters of the languages of Ethiopia, with Metafont fonts based on EthTeX's. The macros use the Babel framework.\n"
"\n"
-"date: 2006-12-02 13:51:32 +0000"
+"date: 2012-05-07 20:43:29 +0000"
msgstr ""
-#. summary(texlive-xpeek)
-msgid "Define commands that peek ahead in the input stream"
-msgstr ""
+#. summary(texlive-specs-h:texlive-ethiop-doc)
+#, fuzzy
+msgid "Documentation for texlive-ethiop"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-verbdef)
-msgid "Define commands which expand to verbatim text"
-msgstr ""
+#. description(texlive-specs-h:texlive-ethiop-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ethiop"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xargs)
-msgid "Define commands with many optional arguments"
+#. summary(texlive-specs-h:texlive-ethiop-t1)
+msgid "Type 1 versions of Amharic fonts"
msgstr ""
-#. summary(texlive-leading)
-msgid "Define leading with a length"
+#. description(texlive-specs-h:texlive-ethiop-t1)
+msgid ""
+"These fonts are drop-in Adobe type 1 replacements for the fonts of the ethiop package.\n"
+"\n"
+"date: 2014-04-26 08:32:59 +0000"
msgstr ""
-#. summary(texlive-newverbs)
-msgid "Define new versions of \\verb, including short verb versions"
-msgstr ""
+#. summary(texlive-specs-h:texlive-ethiop-t1-doc)
+#, fuzzy
+msgid "Documentation for texlive-ethiop-t1"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-paresse)
-msgid "Define simple macros for greek letters"
+#. description(texlive-specs-h:texlive-ethiop-t1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ethiop-t1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-ethiop-t1-fonts)
+msgid "Severed fonts for texlive-ethiop-t1"
msgstr ""
-#. summary(texlive-unisugar)
-msgid "Define syntactic sugar for Unicode LaTeX"
+#. description(texlive-specs-h:texlive-ethiop-t1-fonts)
+msgid "The separated fonts package for texlive-ethiop-t1"
msgstr ""
-#. summary(texlive-newvbtm)
-msgid "Define your own verbatim-like environment"
+#. summary(texlive-specs-h:texlive-etoc)
+msgid "Completely customisable TOCs"
msgstr ""
-#. description(texlive-placeins)
+#. description(texlive-specs-h:texlive-etoc)
msgid ""
-"Defines a \\FloatBarrier command, beyond which floats may not pass; useful, for example, to ensure all floats for a section appear before the next \\section command.\n"
+"The package gives the user complete control of how the entries of the table of contents should be constituted from the name, number, and page number of each sectioning unit. The layout is controlled by the definition of 'line styles' for each sectioning level used in the document. The package provides its own custom line styles (which may be used as examples), and continues to support the standard formatting inherited from the LaTeX document classes, but the package can also allow the user to delegate the details to packages dealing with list making environments (such as enumitem). The package's default global style typesets tables of contents in a multi-column format, with either a standard heading, or a ruled title (optionally with a frame around the table). The \\tableofcontents command may be used arbitrarily many times in the same document, while \\localtableofcontents provides a 'local' table of contents.\n"
"\n"
-"date: 2010-09-22 13:00:44 +0000"
+"date: 2014-05-18 11:08:20 +0000"
msgstr ""
-#. summary(texlive-makebox)
-msgid "Defines a \\makebox* command"
+#. summary(texlive-specs-h:texlive-etoc-doc)
+#, fuzzy
+msgid "Documentation for texlive-etoc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-etoc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-etoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-etoolbox)
+msgid "Tool-box for LaTeX programmers using e-TeX"
msgstr ""
-#. description(texlive-selectp)
+#. description(texlive-specs-h:texlive-etoolbox)
msgid ""
-"Defines a command \\outputonly, whose argument is a list of pages to be output. With the command present (before \\begin{document}), only those pages are output. This package was inspired by code published by Knuth in TUGboat 8(2) (July 1987).\n"
+"The package is a toolbox of programming facilities geared primarily towards LaTeX class and package authors. It provides LaTeX frontends to some of the new primitives provided by e-TeX as well as some generic tools which are not strictly related to e-TeX but match the profile of this package. Note that the initial versions of this package were released under the name elatex. The package provides functions that seem to offer alternative ways of implementing some LaTeX kernel commands; nevertheless, the package will not modify any part of the LaTeX kernel.\n"
"\n"
-"date: 2010-10-24 14:23:58 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pbox)
-msgid ""
-"Defines a command \\pbox{<max width>}{<text>} which adjusts its width to that of the enclosed text, up to the maximum width given. The package also defines some associated length commands.\n"
-"\n"
-"date: 2011-12-08 00:39:40 +0000"
+#. summary(texlive-specs-h:texlive-etoolbox-de)
+msgid "German translation of documentation of etoolbox"
msgstr ""
-#. description(texlive-shadow)
+#. description(texlive-specs-h:texlive-etoolbox-de)
msgid ""
-"Defines a command \\shabox (analgous to \\fbox), and supporting mechanisms.\n"
+"The version translated is 2.1 or 2011-01-03.\n"
"\n"
-"date: 2010-11-01 12:35:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-titleref)
-msgid ""
-"Defines a command \\titleref that allows you to cross-reference section (and chapter, etc) titles and captions just like \\ref and \\pageref. The package does not interwork with hyperref; if you need hypertext capabilities, use nameref instead.\n"
-"\n"
-"date: 2010-06-06 11:50:32 +0000"
+#. summary(texlive-specs-h:texlive-etoolbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-etoolbox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-etoolbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-etoolbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-euenc)
+msgid "Unicode font encoding definitions for XeTeX"
msgstr ""
-#. description(texlive-path)
+#. description(texlive-specs-h:texlive-euenc)
msgid ""
-"Defines a macro \\path|...|, similar to the LaTeX \\verb|...|, that sets the text in typewriter font and allows hyphen-less breaks at punctuation characters. The set of characters to be regarded as punctuation may be changed from the package's default.\n"
+"Font encoding definitions for unicode fonts loaded by LaTeX in XeTeX or LuaTeX. The package provides two encodings: EU1, designed for use with XeTeX, which the fontspec uses for unicode fonts which require no macro-level processing for accents, and EU2, which provides the same facilities for use with LuaTeX. Neither encoding places any restriction on the glyphs provided by a font; use of EU2 causes the package euxunicode to be loaded (the package is part of this distribution). The package includes font definition files for use with the Latin Modern OpenType fonts.\n"
"\n"
-"date: 2011-04-07 20:08:26 +0000"
+"date: 2013-12-17 16:06:14 +0000"
msgstr ""
-#. description(texlive-tds)
-msgid ""
-"Defines a structure for placement of TeX-related files on an hierarchical file system, in a way that is well-defined, and is readily implementable.\n"
-"\n"
-"date: 2009-10-09 22:51:28 +0000"
+#. summary(texlive-specs-h:texlive-euenc-doc)
+#, fuzzy
+msgid "Documentation for texlive-euenc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-euenc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-euenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-eukdate)
+msgid "UK format dates, with weekday"
msgstr ""
-#. description(texlive-warpcol)
+#. description(texlive-specs-h:texlive-eukdate)
msgid ""
-"Defines a tabular column type for formatting numerical columns in LaTeX. The column type enables numerical items to be right justified relative to each other, while centred beneath the column label. In addition, macros are provided to enable variations on this column type to be defined. Usage of the package is superficially similar to that of dcolumn; however, the alignment scheme is different, and the packages have different, though overlapping, applications.\n"
+"The package is used to change the format of \\today's date, including the weekday, e.g., \"Saturday, 26 June 2008\", the 'UK format', which is preferred in many parts of the world, as distinct from that which is used in \\maketitle of the article class, \"June 26, 2008\", the 'US format'.\n"
"\n"
-"date: 2007-11-21 19:02:33 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-subfigmat)
-msgid ""
-"Defines an array/matrix-type environment that is used with the subfigure package to automate the placement of subfigures (or tables or text). The subfigures are placed left-to-right, top- to-bottom.\n"
-"\n"
-"date: 2010-11-03 10:56:13 +0000"
+#. summary(texlive-specs-h:texlive-eukdate-doc)
+#, fuzzy
+msgid "Documentation for texlive-eukdate"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-eukdate-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eukdate"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-euler)
+msgid "Use AMS Euler fonts for math"
msgstr ""
-#. description(texlive-multenum)
+#. description(texlive-specs-h:texlive-euler)
msgid ""
-"Defines an environment multienumerate, that produces an enumerated array in which columns are vertically aligned on the counter. The motivation was lists of answers for a text book, where there are many rather small items; the multienumerate environment goes some way to making such lists look neater.\n"
+"Provides a setup for using the AMS Euler family of fonts for mathematics in LaTeX documents. \"The underlying philosophy of Zapf's Euler design was to capture the flavour of mathematics as it might be written by a mathematician with excellent handwriting.\" The euler package is based on Knuth's macros for the book 'Concrete Mathematics'. The text fonts for the Concrete book are supported by the beton package.\n"
"\n"
-"date: 2011-03-20 18:39:20 +0000"
+"date: 2014-04-26 10:45:28 +0000"
msgstr ""
-#. description(texlive-outlines)
-msgid ""
-"Defines an outline environment, which allows outline-style indented lists with freely mixed levels up to four levels deep. It replaces the nested begin/end pairs by different item tags \\1 to \\4 for each nesting level. This is very convenient in cases where nested lists are used a lot, such as for to-do lists or presentation slides.\n"
-"\n"
-"date: 2012-01-24 11:03:36 +0000"
+#. summary(texlive-specs-h:texlive-euler-doc)
+#, fuzzy
+msgid "Documentation for texlive-euler"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-euler-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-euler"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-eulervm)
+msgid "Euler virtual math fonts"
msgstr ""
-#. description(texlive-sidecap)
+#. description(texlive-specs-h:texlive-eulervm)
msgid ""
-"Defines environments called SCfigure and SCtable (analogous to figure and table) to typeset captions sideways. Options include outercaption, innercaption, leftcaption and rightcaption.\n"
+"The well-known Euler fonts are suitable for typsetting mathematics in conjunction with a variety of text fonts which do not provide mathematical character sets of their own. Euler- VM is a set of virtual mathematics fonts based on Euler and CM. This approach has several advantages over immediately using the real Euler fonts: Most noticeably, less TeX resources are consumed, the quality of various math symbols is improved and a usable \\hslash symbol can be provided. The virtual fonts are accompanied by a LaTeX package which makes them easy to use, particularly in conjunction with Type1 PostScript text fonts. They are compatible with amsmath. A package option allows the fonts to be loaded at 95% of their nominal size, thus blending better with certain text fonts, e.g., Minion.\n"
"\n"
-"date: 2007-01-14 22:54:50 +0000"
+"date: 2014-04-26 10:45:28 +0000"
msgstr ""
-#. description(texlive-newvbtm)
-msgid ""
-"Defines general purpose macro named \\newverbatim to define your own verbatim-like environment. It also has a supplementary style file varvbtm.sty to provide set of macros for variants of verbatim, such as tab emulation.\n"
-"\n"
-"date: 2011-09-17 08:58:19 +0000"
+#. summary(texlive-specs-h:texlive-eulervm-doc)
+#, fuzzy
+msgid "Documentation for texlive-eulervm"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-h:texlive-eulervm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eulervm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-euro)
+msgid "Provide Euro values for national currency amounts"
msgstr ""
-#. description(texlive-version)
+#. description(texlive-specs-h:texlive-euro)
msgid ""
-"Defines macros \\includeversion{NAME} and \\excludeversion{NAME}, each of which defines an environment NAME whose text is to be included or excluded from compilation. Although the command syntax is very similar to that of comment, comment.sty is to be preferred to version.sty for documents where significant chunks of text may be excluded.\n"
+"Converts arbitrary national currency amounts using the Euro as base unit, and typesets monetary amounts in almost any desired way. Write, e.g., \\ATS{17.6} to get something like '17,60 oS (1,28 Euro)' automatically. Conversion rates for the initial Euro-zone countries are already built-in. Further rates can be added easily. The package uses the fp package to do its sums.\n"
"\n"
-"date: 2011-04-02 13:43:25 +0000"
+"date: 2012-04-24 11:27:55 +0000"
msgstr ""
-#. description(texlive-sfg)
-msgid ""
-"Defines some commands to draw signal flow graphs as used by electrical and electronics engineers and graph theorists. Requires fp and pstricks packages (and a relatively fast machine).\n"
-"\n"
-"date: 2010-10-25 15:10:20 +0000"
+#. summary(texlive-specs-h:texlive-euro-ce)
+msgid "Euro and CE sign font"
msgstr ""
-#. description(texlive-underlin)
+#. description(texlive-specs-h:texlive-euro-ce)
msgid ""
-"Defines two pagestyles that provide underlined page heads in LaTeX.\n"
+"Metafont source for the symbols in several variants, designed to fit with the Computer Modern-set text.\n"
"\n"
-"date: 2007-06-02 08:25:58 +0000"
+"date: 2014-04-26 10:45:28 +0000"
msgstr ""
-#. summary(texlive-newunicodechar)
-msgid "Definitions of the meaning of Unicode characters"
-msgstr ""
+#. summary(texlive-specs-h:texlive-euro-ce-doc)
+#, fuzzy
+msgid "Documentation for texlive-euro-ce"
+msgstr "Dokumentace pro adaptx"
-#. summary(velocity:velocity-demo)
-msgid "Demo for velocity"
-msgstr ""
+#. description(texlive-specs-h:texlive-euro-ce-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-euro-ce"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xmlgraphics-batik:xmlgraphics-batik-demo)
-msgid "Demo for xmlgraphics-batik"
-msgstr ""
+#. summary(texlive-specs-h:texlive-euro-doc)
+#, fuzzy
+msgid "Documentation for texlive-euro"
+msgstr "Dokumentace pro adaptx"
-#. summary(xerces-j2:xerces-j2-demo)
-msgid "Demonstration and sample files for xerces-j2"
-msgstr ""
+#. description(texlive-specs-h:texlive-euro-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-euro"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xalan-j2:xalan-j2-demo)
-msgid "Demonstration and samples for xalan-j2"
+#. summary(texlive-specs-h:texlive-europecv)
+msgid "Unofficial class for European curricula vitae"
msgstr ""
-#. description(xmlgraphics-batik:xmlgraphics-batik-demo)
-msgid "Demonstrations and samples for xmlgraphics-batik."
+#. description(texlive-specs-h:texlive-europecv)
+msgid ""
+"The europecv class is an unofficial LaTeX implementation of the standard model for curricula vitae (the \"Europass CV\") as recommended by the European Commission. Although primarily intended for users in the European Union, the class is flexible enough to be used for any kind of curriculum vitae. The class has localisations for all the official languages of the EU (plus Catalan), as well as options permitting input in UTF-8 and koi8-r.\n"
+"\n"
+"date: 2014-05-24 12:57:16 +0000"
msgstr ""
-#. summary(texlive-verbatimbox)
-msgid "Deposit verbatim text in a box"
-msgstr ""
+#. summary(texlive-specs-h:texlive-europecv-doc)
+#, fuzzy
+msgid "Documentation for texlive-europecv"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subfigure)
-msgid "Deprecated: Figures divided into subfigures"
-msgstr ""
+#. description(texlive-specs-h:texlive-europecv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-europecv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nag)
-msgid "Detecting and warning about obsolete LaTeX commands"
+#. summary(texlive-specs-h:texlive-eurosym)
+msgid "Metafont and macros for Euro sign"
msgstr ""
-#. summary(texlive-latexdiff)
-msgid "Determine and mark up significant differences between latex files"
-msgstr ""
-
-#. description(tslib:tslib-devel-32bit)
-msgid "Devel package for tslib. Tslib is an abstraction layer for touchscreen panel events."
-msgstr ""
-
-#. description(texlive-lettre)
+#. description(texlive-specs-h:texlive-eurosym)
msgid ""
-"Developed from the ancestor of the standard letter class, at the Observatoire de Geneve.\n"
+"The European currency symbol for the Euro implemented in Metafont, using the official European Commission dimensions, and providing several shapes (normal, slanted, bold, outline). The package also includes a LaTeX package which defines the macro, pre-compiled tfm files, and documentation.\n"
"\n"
-"date: 2007-01-08 21:21:56 +0000"
+"date: 2014-04-26 17:51:19 +0000"
msgstr ""
-#. summary(tumbler:tumbler-doc)
-msgid "Developer Documentation for tumbler"
-msgstr ""
+#. summary(texlive-specs-h:texlive-eurosym-doc)
+#, fuzzy
+msgid "Documentation for texlive-eurosym"
+msgstr "Dokumentace pro adaptx"
-#. summary(vsqlite++:vsqlite++-doc)
-msgid "Development documentation for vsqlite++"
-msgstr ""
+#. description(texlive-specs-h:texlive-eurosym-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-eurosym"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xcb-util-wm:xcb-util-wm-devel-32bit)
-msgid "Development files for the XCB EWMH/ICCCM utility modules"
+#. summary(texlive-specs-h:texlive-eurosym-fonts)
+msgid "Severed fonts for texlive-eurosym"
msgstr ""
-#. summary(xcb-util-renderutil:xcb-util-renderutil-devel-32bit)
-msgid "Development files for the XCB Render utility module"
+#. description(texlive-specs-h:texlive-eurosym-fonts)
+msgid "The separated fonts package for texlive-eurosym"
msgstr ""
-#. summary(xcb-util-cursor:xcb-util-cursor-devel-32bit)
-msgid "Development files for the XCB cursor library (libxcursor port)"
-msgstr ""
+#. summary(texlive-specs-h:texlive-euxm)
+#, fuzzy
+msgid "Package euxm"
+msgstr "Balík"
-#. summary(xcb-util-image:xcb-util-image-devel-32bit)
-msgid "Development files for the XCB image utility module"
+#. description(texlive-specs-h:texlive-euxm)
+msgid "The euxm package"
msgstr ""
-#. summary(xcb-util-keysyms:xcb-util-keysyms-devel-32bit)
-msgid "Development files for the XCB keysyms utility module"
+#. summary(texlive-specs-h:texlive-everyhook)
+msgid "Hooks for standard TeX token lists"
msgstr ""
-#. summary(tslib:tslib-devel-32bit)
-msgid "Development files for tslib, a touchscreen panel event layer"
+#. description(texlive-specs-h:texlive-everyhook)
+msgid ""
+"The package takes control of the six TeX token registers \\everypar, \\everymath, \\everydisplay, \\everyhbox, \\everyvbox and \\everycr. Real hooks for each of the registers may be installed using a stack like interface. For backwards compatibility, each of the \\everyX token lists can be set without interfering with the hooks.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tvbrowser)
-msgid "Digital TV guide"
-msgstr ""
+#. summary(texlive-specs-h:texlive-everyhook-doc)
+#, fuzzy
+msgid "Documentation for texlive-everyhook"
+msgstr "Dokumentace pro adaptx"
-#. summary(tuned:tuned-utils)
-msgid "Disk and net statistic monitoring systemtap scripts"
-msgstr ""
+#. description(texlive-specs-h:texlive-everyhook-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-everyhook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-phaistos)
-msgid "Disk of Phaistos font"
+#. summary(texlive-specs-h:texlive-everypage)
+msgid "Provide hooks to be run on every page of a document"
msgstr ""
-#. summary(texlive-margbib)
-msgid "Display bibitem tags in the margins"
+#. description(texlive-specs-h:texlive-everypage)
+msgid ""
+"The package provides hooks to perform actions on every page, or on the current page. Specifically, actions are performed after the page is composed, but before it is shipped, so they can be used to prepare the output page in tasks like putting watermarks in the background, or in setting the next page layout, etc.\n"
+"\n"
+"date: 2012-06-15 13:04:50 +0000"
msgstr ""
-#. summary(texlive-typeoutfileinfo)
-msgid "Display class/package/file information"
-msgstr ""
+#. summary(texlive-specs-h:texlive-everypage-doc)
+#, fuzzy
+msgid "Documentation for texlive-everypage"
+msgstr "HTML dokumentace pro GNU C Library"
-#. description(texlive-layouts)
+#. description(texlive-specs-h:texlive-everypage-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-everypage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-h:texlive-exam)
+#, fuzzy
+msgid "Package for typesetting exam scripts"
+msgstr "Perlový modul pro vytváření a zpracování tar souborů"
+
+#. description(texlive-specs-h:texlive-exam)
msgid ""
-"Display information about a document, including: text positioning on a page; disposition of floats; layout of paragraphs, lists, footnotes, table of contents, and sectional headings; font boxes. Facilities are provided for a document designer to experiment with the layout parameters.\n"
+"Provides a class exam, which eases production of exams, even by a LaTeX novice. Simple commands are provided to: create questions, parts of questions, subparts of parts, and subsubparts of subparts, all with optional point values; create a grading table, indexed either by question number (listing each question and the total possible points for that question) or by page number (listing each page with points and the total possible points for that page); create headers and footers that are each specified in three parts: one part to be left justified, one part to be centered, and one part to be right justified, in the manner of fancyhdr Headers and/or footers can be different on the first page of the exam, can be different on the last page of the exam, and can vary depending on whether the page number is odd or even, or on whether the current page continues a question from a previous page, or on whether the last question on the current page continues onto the following page. Multiple l
ine headers and/or footers are allowed, and it's easy to increase the part of the page devoted to headers and/or footers to allow for this. Note that the bundle exams also provides a file exam.cls; the two bundles therefore clash, and should not be installed on the same system.\n"
"\n"
-"date: 2009-09-02 16:09:14 +0000"
+"date: 2013-12-06 00:11:02 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-multiplesearch)
-msgid "Display multiple searches at the same time"
-msgstr ""
+#. summary(texlive-specs-h:texlive-exam-doc)
+#, fuzzy
+msgid "Documentation for texlive-exam"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-isonums)
-msgid "Display numbers in maths mode according to ISO 31-0"
-msgstr ""
+#. description(texlive-specs-h:texlive-exam-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-exam"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-regcount)
-msgid "Display the allocation status of the TeX registers"
+#. summary(texlive-specs-h:texlive-exam-n)
+msgid "Exam class, focused on collaborative authoring"
msgstr ""
-#. summary(texlive-texdef)
-msgid "Display the definitions of TeX commands"
+#. description(texlive-specs-h:texlive-exam-n)
+msgid ""
+"The class design offers: Direct support for collaborative development of an exam, using a model in which a departmental 'exams convener' or 'exam chair' coordinates multiple authors writing individual questions (the class file and associated process is in regular use within a physics and astronomy department). All of the 'traditional' exam paper features such as sectioning, per-part running marks, 'Question n continued' catchwords, and so on. Readily configured local adaptation.\n"
+"\n"
+"date: 2014-05-10 15:28:26 +0000"
msgstr ""
-#. summary(texlive-layouts)
-msgid "Display various elements of a document's layout"
-msgstr ""
+#. summary(texlive-specs-h:texlive-exam-n-doc)
+#, fuzzy
+msgid "Documentation for texlive-exam-n"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-umthesis)
-msgid "Dissertations at the University of Michigan"
-msgstr ""
+#. description(texlive-specs-h:texlive-exam-n-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-exam-n"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tcldoc)
-msgid "Doc/docstrip for tcl"
-msgstr ""
+#. summary(texlive-specs-h:texlive-examdesign)
+#, fuzzy
+msgid "LaTeX class for typesetting exams"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. description(texlive-tui)
+#. description(texlive-specs-h:texlive-examdesign)
msgid ""
-"Doctoral Dissertations from the Faculty of Engineering at the Universidad de los Andes, Bogota, Colombia. The class is implemented as an extension of the memoir class. Clase de Tesis doctorales para ingenieria, Universidad de los Andes, Bogota.\n"
+"This bundle provides a class examdesign. The class provides several features useful for designing tests or question sets: it allows for explicit markup of questions and answers; the class will, at the user's request, automatically generate answer keys; multiple versions of the same test can be generated automatically, with the ordering of questions within each section randomly permuted so as to minimize cheating; the generated answer keys can be constructed either with or without the questions included; environments are provided to assist in constructing the most common types of test question: matching, true/false, multiple-choice, fill-in-the-blank, and short answer/essay questions.\n"
"\n"
-"date: 2012-07-30 16:08:41 +0000"
+"date: 2013-12-06 00:11:02 +0000"
msgstr ""
-#. summary(texlive-jpsj)
-msgid "Document Class for Journal of the Physical Society of Japan"
-msgstr ""
+#. summary(texlive-specs-h:texlive-examdesign-doc)
+#, fuzzy
+msgid "Documentation for texlive-examdesign"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-IEEEtran)
-msgid "Document class for IEEE Transactions journals and conferences"
-msgstr ""
+#. description(texlive-specs-h:texlive-examdesign-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-examdesign"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uowthesis)
-msgid "Document class for dissertations at the University of Wollongong"
+#. summary(texlive-specs-h:texlive-example)
+msgid "Typeset examples for TeX courses"
msgstr ""
-#. summary(texlive-uafthesis)
-msgid "Document class for theses at University of Alaska Fairbanks"
-msgstr ""
-
-#. description(texlive-refman)
+#. description(texlive-specs-h:texlive-example)
msgid ""
-"Document classes (report- and article-style) for writing technical reference manuals. It offers a wide left margin for notes to the reader, like some of the manuals distributed by Adobe.\n"
+"The package makes it easier to produce examples for TeX course. It provides an example environment, which typesets its contents on the left of the page, and prints it verbatim on the right.\n"
"\n"
-"date: 2006-11-19 20:19:11 +0000"
+"date: 2014-04-08 09:06:38 +0000"
msgstr ""
-#. summary(texlive-kdgdocs)
-msgid "Document classes for Karel de Grote University College"
+#. summary(texlive-specs-h:texlive-examplep)
+msgid "Verbatim phrases and listings in LaTeX"
msgstr ""
-#. summary(texlive-tufte-latex)
-msgid "Document classes inspired by the work of Edward Tufte"
+#. description(texlive-specs-h:texlive-examplep)
+msgid ""
+"Examplep provides sophisticated features for typesetting verbatim source code listings, including the display of the source code and its compiled LaTeX or Metapost output side-by- side, with automatic width detection and enabled page breaks (in the source), without the need for specifying the source twice. Special care is taken that section, page and footnote numbers do not interfere with the main document. For typesetting short verbatim phrases, a replacement for the \\verb command is also provided in the package, which can be used inside tables and moving arguments such as footnotes and section titles. The listings package is used for syntax highlighting. The accompanying codep package and the wrfiles.pl Perl script provide a convenient interface to the examplep package for authors of manuals. With codep it is possible to generate the source code, the LaTeX or METAPOST output and the compilable example file from a single source embedded into the appropriate place of the .tex docu
ment file.\n"
+"\n"
+"date: 2012-06-15 13:04:50 +0000"
msgstr ""
-#. summary(texlive-tagging)
-msgid "Document configuration with tags"
-msgstr ""
+#. summary(texlive-specs-h:texlive-examplep-doc)
+#, fuzzy
+msgid "Documentation for texlive-examplep"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texdoc)
+#. description(texlive-specs-h:texlive-examplep-doc)
#, fuzzy
-msgid "Documentation access for TeX distributions"
-msgstr "Příklady pro puretls"
+msgid "This package includes the documentation for texlive-examplep"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-skdoc)
-msgid "Documentation and extraction for packages and document classes"
+#. summary(texlive-specs-h:texlive-exceltex)
+msgid "Get data from Excel files into LaTeX"
msgstr ""
-#. summary(vips:vips-doc)
-#, fuzzy
-msgid "Documentation for VIPS library"
-msgstr "Dokumentace pro adaptx"
-
-#. summary(xindy:xindy-doc)
-msgid "Documentation for Xindy"
+#. description(texlive-specs-h:texlive-exceltex)
+msgid ""
+"Exceltex is a LaTeX package combined with a helper program written in Perl. It provides an easy to use yet powerful and flexible way to get data from Spreadsheets into LaTeX. In contrast to other solutions, exceltex does not seek to make the creation of tables in LaTeX easier, but to get data from Spreadsheets into LaTeX as easily as possible. The Excel (TM) file format only acts as an interface between the spreadsheet application and exceltex beacause it is easily accessible (via the Spreadsheet::ParseExcel Perl module) and because most spreadsheet applications are able to read and write Excel files.\n"
+"\n"
+"date: 2012-05-07 20:43:29 +0000"
msgstr ""
-#. summary(texlive-IEEEconf:texlive-IEEEconf-doc)
+#. summary(texlive-specs-h:texlive-exceltex-doc)
#, fuzzy
-msgid "Documentation for texlive-IEEEconf"
+msgid "Documentation for texlive-exceltex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-IEEEtran:texlive-IEEEtran-doc)
+#. description(texlive-specs-h:texlive-exceltex-doc)
#, fuzzy
-msgid "Documentation for texlive-IEEEtran"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-exceltex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-SIstyle:texlive-SIstyle-doc)
-#, fuzzy
-msgid "Documentation for texlive-SIstyle"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-excludeonly)
+msgid "Prevent files being \\include-ed"
+msgstr ""
-#. summary(texlive-SIunits:texlive-SIunits-doc)
-#, fuzzy
-msgid "Documentation for texlive-SIunits"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-excludeonly)
+msgid ""
+"The package defines an \\excludeonly command, which is (in effect) the opposite of \\includeonly. If both \\includeonly and \\excludeonly exist in a document, only files \"allowed\" by both will be included. The package redefines the internal \\@include command, so it conflicts with packages that do the same. Examples are the classes paper.cls and thesis.cls.\n"
+"\n"
+"date: 2012-06-15 13:04:50 +0000"
+msgstr ""
-#. summary(texlive-Tabbing:texlive-Tabbing-doc)
+#. summary(texlive-specs-h:texlive-excludeonly-doc)
#, fuzzy
-msgid "Documentation for texlive-Tabbing"
+msgid "Documentation for texlive-excludeonly"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-icsv:texlive-icsv-doc)
+#. description(texlive-specs-h:texlive-excludeonly-doc)
#, fuzzy
-msgid "Documentation for texlive-icsv"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-excludeonly"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-idxlayout:texlive-idxlayout-doc)
-#, fuzzy
-msgid "Documentation for texlive-idxlayout"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-exercise)
+msgid "Typeset exercises, problems, etc. and their answers"
+msgstr ""
-#. summary(texlive-ieeepes:texlive-ieeepes-doc)
-#, fuzzy
-msgid "Documentation for texlive-ieeepes"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-exercise)
+msgid ""
+"The package helps to typeset exercises or list of exercises within any document. Exercises, questions and sub-questions are automatically numbered. It is possible to put answers in the same document, and display them immediatly, later in the document or not to print answers at all. The layout of exercises is fully customisable. It is possible to typeset long problems, short exercises, questionnaires, etc. Usage of the babel package is detected, but not fully supported yet (only English and French are implemented).\n"
+"\n"
+"date: 2012-05-08 13:13:49 +0000"
+msgstr ""
-#. summary(texlive-ifetex:texlive-ifetex-doc)
+#. summary(texlive-specs-h:texlive-exercise-doc)
#, fuzzy
-msgid "Documentation for texlive-ifetex"
+msgid "Documentation for texlive-exercise"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ifluatex:texlive-ifluatex-doc)
+#. description(texlive-specs-h:texlive-exercise-doc)
#, fuzzy
-msgid "Documentation for texlive-ifluatex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-exercise"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ifmslide:texlive-ifmslide-doc)
-#, fuzzy
-msgid "Documentation for texlive-ifmslide"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-exp-testopt)
+msgid "Expandable \\@testopt (and related) macros"
+msgstr ""
-#. summary(texlive-ifmtarg:texlive-ifmtarg-doc)
-#, fuzzy
-msgid "Documentation for texlive-ifmtarg"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-exp-testopt)
+msgid ""
+"The package provides an expandable variant of the LaTeX kernel command \\@testopt, named \\@expandable@testopt, and a more general \\@expandable@ifopt, both intended for package writers. Also we have a variant of \\newcommand which uses these macros to check for optional arguments.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-ifnextok:texlive-ifnextok-doc)
+#. summary(texlive-specs-h:texlive-exp-testopt-doc)
#, fuzzy
-msgid "Documentation for texlive-ifnextok"
+msgid "Documentation for texlive-exp-testopt"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ifoddpage:texlive-ifoddpage-doc)
+#. description(texlive-specs-h:texlive-exp-testopt-doc)
#, fuzzy
-msgid "Documentation for texlive-ifoddpage"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-exp-testopt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ifplatform:texlive-ifplatform-doc)
+#. summary(texlive-specs-h:texlive-expdlist)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-ifplatform"
-msgstr "Dokumentace pro castor"
+msgid "Expanded description environments"
+msgstr "Přenositelný dávkový systém"
-#. summary(texlive-ifsym:texlive-ifsym-doc)
-#, fuzzy
-msgid "Documentation for texlive-ifsym"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-expdlist)
+msgid ""
+"The package provides additional features for the LaTeX description environment, including adjustable left margin. The package also allows the user to 'break' a list (for example, to interpose a comment) without affecting the structure of the list (this works for itemize and eumerate lists and numbered lists remain in sequence).\n"
+"\n"
+"date: 2012-07-12 13:21:21 +0000"
+msgstr ""
-#. summary(texlive-iftex:texlive-iftex-doc)
+#. summary(texlive-specs-h:texlive-expdlist-doc)
#, fuzzy
-msgid "Documentation for texlive-iftex"
+msgid "Documentation for texlive-expdlist"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ifthenx:texlive-ifthenx-doc)
+#. description(texlive-specs-h:texlive-expdlist-doc)
#, fuzzy
-msgid "Documentation for texlive-ifthenx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-expdlist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ifxetex:texlive-ifxetex-doc)
-#, fuzzy
-msgid "Documentation for texlive-ifxetex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-expex)
+msgid "Format linguistic examples and glosses, with reference capabilities"
+msgstr ""
-#. summary(texlive-iitem:texlive-iitem-doc)
-#, fuzzy
-msgid "Documentation for texlive-iitem"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-expex)
+msgid ""
+"The package provides macros for typesetting linguistic examples and glosses, with a refined mechanism for referencing examples and parts of examples. The package can be used with LaTex using the .sty wrapper or with PlainTex.\n"
+"\n"
+"date: 2014-03-12 19:21:38 +0000"
+msgstr ""
-#. summary(texlive-ijmart:texlive-ijmart-doc)
+#. summary(texlive-specs-h:texlive-expex-doc)
#, fuzzy
-msgid "Documentation for texlive-ijmart"
+msgid "Documentation for texlive-expex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ijqc:texlive-ijqc-doc)
+#. description(texlive-specs-h:texlive-expex-doc)
#, fuzzy
-msgid "Documentation for texlive-ijqc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-expex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-imac:texlive-imac-doc)
+#. summary(texlive-specs-h:texlive-export)
#, fuzzy
-msgid "Documentation for texlive-imac"
-msgstr "Dokumentace pro adaptx"
+msgid "Import and export values of LaTeX registers"
+msgstr "Kinyarwanda lokalizační soubory pro OpenOffice.org"
-#. summary(texlive-image-gallery:texlive-image-gallery-doc)
-#, fuzzy
-msgid "Documentation for texlive-image-gallery"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+#. description(texlive-specs-h:texlive-export)
+msgid ""
+"The package allows the user to export/import the values of LaTeX registers (counters, rigid and rubber lengths only). It is not for faint-hearted users. The package may be used, for example, to communicate between documents for the purposes of dvipaste.\n"
+"\n"
+"date: 2013-10-03 12:20:59 +0000"
+msgstr ""
-#. summary(texlive-imakeidx:texlive-imakeidx-doc)
+#. summary(texlive-specs-h:texlive-export-doc)
#, fuzzy
-msgid "Documentation for texlive-imakeidx"
+msgid "Documentation for texlive-export"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-impnattypo:texlive-impnattypo-doc)
+#. description(texlive-specs-h:texlive-export-doc)
#, fuzzy
-msgid "Documentation for texlive-impnattypo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-export"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-import:texlive-import-doc)
-#, fuzzy
-msgid "Documentation for texlive-import"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-expressg)
+msgid "Diagrams consisting of boxes, lines, and annotations"
+msgstr ""
-#. summary(texlive-imsproc:texlive-imsproc-doc)
-#, fuzzy
-msgid "Documentation for texlive-imsproc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-expressg)
+msgid ""
+"A MetaPost package providing facilities to assist in drawing diagrams that consist of boxes, lines, and annotations. Particular support is provided for creating EXPRESS-G diagrams, for example IDEF1X, OMT, Shlaer-Mellor, and NIAM diagrams. The package may also be used to create UML and most other Box-Line- Annotation charts, but not Gantt charts directly.\n"
+"\n"
+"date: 2012-07-11 12:19:50 +0000"
+msgstr ""
-#. summary(texlive-imtekda:texlive-imtekda-doc)
+#. summary(texlive-specs-h:texlive-expressg-doc)
#, fuzzy
-msgid "Documentation for texlive-imtekda"
+msgid "Documentation for texlive-expressg"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-incgraph:texlive-incgraph-doc)
+#. description(texlive-specs-h:texlive-expressg-doc)
#, fuzzy
-msgid "Documentation for texlive-incgraph"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-expressg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-inconsolata:texlive-inconsolata-doc)
-#, fuzzy
-msgid "Documentation for texlive-inconsolata"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-exsheets)
+msgid "Create exercise sheets and exams"
+msgstr ""
-#. summary(texlive-index:texlive-index-doc)
-#, fuzzy
-msgid "Documentation for texlive-index"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-exsheets)
+msgid ""
+"The package provides the means to create exercises or questions and their corresponding solutions. The questions may be divided into classes and/or topics and may be printed selectively. Meta-data to questions can be added and recovered. The solutions may be printed where they are, or collected and printed at a later point in the document all together, section- wise or selectively by ID. The package provides the means to selectively include questions from an external file, and to control the style of headings of both questions and solutions.\n"
+"\n"
+"date: 2014-05-11 23:27:58 +0000"
+msgstr ""
-#. summary(texlive-initials:texlive-initials-doc)
+#. summary(texlive-specs-h:texlive-exsheets-doc)
#, fuzzy
-msgid "Documentation for texlive-initials"
+msgid "Documentation for texlive-exsheets"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-inlinebib:texlive-inlinebib-doc)
+#. description(texlive-specs-h:texlive-exsheets-doc)
#, fuzzy
-msgid "Documentation for texlive-inlinebib"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-exsheets"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-inlinedef:texlive-inlinedef-doc)
-#, fuzzy
-msgid "Documentation for texlive-inlinedef"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-exsol)
+msgid "Exercises and solutions from same source, into a book"
+msgstr ""
-#. summary(texlive-inputtrc:texlive-inputtrc-doc)
-#, fuzzy
-msgid "Documentation for texlive-inputtrc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-exsol)
+msgid ""
+"The packageThe exsol package provides macros to allow for embedding exercises and solutions in the LaTeX source of an instructional text (e.g., a book or a course text) while generating the following separate documents: - your original text that only contains the exercises, and - a solution book that contains only the solutions to the exercises (optionally, the exercises themselves are also copied to the solution book). The exercise data are generated when running LaTeX on your document; the first run also writes the solutions to a secondary file that may be included in a simple document harness, may be processed by LaTeX, to generate a nice solution book. The code of the package was derived (in large part) from fancyvrb.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-insbox:texlive-insbox-doc)
+#. summary(texlive-specs-h:texlive-exsol-doc)
#, fuzzy
-msgid "Documentation for texlive-insbox"
+msgid "Documentation for texlive-exsol"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-interactiveworkbook:texlive-interactiveworkbook-doc)
+#. description(texlive-specs-h:texlive-exsol-doc)
#, fuzzy
-msgid "Documentation for texlive-interactiveworkbook"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-exsol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-interfaces:texlive-interfaces-doc)
-#, fuzzy
-msgid "Documentation for texlive-interfaces"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-extarrows)
+msgid "Extra Arrows beyond those provided in AMSmath"
+msgstr ""
-#. summary(texlive-interpreter:texlive-interpreter-doc)
-#, fuzzy
-msgid "Documentation for texlive-interpreter"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-extarrows)
+msgid ""
+"Arrows are provided to supplement \\xleftarrow and \\xrightarrow of the AMSMath package: \\xlongequal, \\xLongleftarrow, \\xLongrightarrow, \\xLongleftrightarrow, \\xLeftrightarrow. \\xlongleftrightarrow, \\xleftrightarrow, \\xlongleftarrow and \\xlongrightarrow.\n"
+"\n"
+"date: 2012-05-07 20:43:29 +0000"
+msgstr ""
-#. summary(texlive-interval:texlive-interval-doc)
+#. summary(texlive-specs-h:texlive-extarrows-doc)
#, fuzzy
-msgid "Documentation for texlive-interval"
+msgid "Documentation for texlive-extarrows"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-inversepath:texlive-inversepath-doc)
+#. description(texlive-specs-h:texlive-extarrows-doc)
#, fuzzy
-msgid "Documentation for texlive-inversepath"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-extarrows"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-invoice:texlive-invoice-doc)
-#, fuzzy
-msgid "Documentation for texlive-invoice"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-exteps)
+msgid "Include EPS figures in MetaPost"
+msgstr ""
-#. summary(texlive-ionumbers:texlive-ionumbers-doc)
-#, fuzzy
-msgid "Documentation for texlive-ionumbers"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-exteps)
+msgid ""
+"Exteps is a module for including external EPS figures into MetaPost figures. It is written entirely in MetaPost, and does not therefore require any post processing of the MetaPost output.\n"
+"\n"
+"date: 2012-07-12 13:21:21 +0000"
+msgstr ""
-#. summary(texlive-iopart-num:texlive-iopart-num-doc)
+#. summary(texlive-specs-h:texlive-exteps-doc)
#, fuzzy
-msgid "Documentation for texlive-iopart-num"
+msgid "Documentation for texlive-exteps"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ipaex:texlive-ipaex-doc)
+#. description(texlive-specs-h:texlive-exteps-doc)
#, fuzzy
-msgid "Documentation for texlive-ipaex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-exteps"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ipaex-type1:texlive-ipaex-type1-doc)
-#, fuzzy
-msgid "Documentation for texlive-ipaex-type1"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-extpfeil)
+msgid "Extensible arrows in mathematics"
+msgstr ""
-#. summary(texlive-iso:texlive-iso-doc)
-#, fuzzy
-msgid "Documentation for texlive-iso"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-extpfeil)
+msgid ""
+"The package provides some more extensible arrows (usable in the same way as \\xleftarrow from amsmath), and a simple command to create new ones.\n"
+"\n"
+"date: 2012-05-07 20:43:29 +0000"
+msgstr ""
-#. summary(texlive-iso10303:texlive-iso10303-doc)
+#. summary(texlive-specs-h:texlive-extpfeil-doc)
#, fuzzy
-msgid "Documentation for texlive-iso10303"
+msgid "Documentation for texlive-extpfeil"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-isodate:texlive-isodate-doc)
+#. description(texlive-specs-h:texlive-extpfeil-doc)
#, fuzzy
-msgid "Documentation for texlive-isodate"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-extpfeil"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-isodoc:texlive-isodoc-doc)
-#, fuzzy
-msgid "Documentation for texlive-isodoc"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-extract)
+msgid "Extract parts of a document and write to another document"
+msgstr ""
-#. summary(texlive-isomath:texlive-isomath-doc)
-#, fuzzy
-msgid "Documentation for texlive-isomath"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-extract)
+msgid ""
+"The package provides the means to extract specific content from a source document and write that to a target document. One could, for instance, use this to extract all exercises from lecture notes and generate an exercises book on the fly. The package also provides an environment which writes its body entirely to the target file. Another environment will write to the target file, but will also execute the body. This allows to share code (for instance, a preamble) between the source document and the target file. Finally, the package provides an interface to conditionally extract content. With a single package option, one can specify exactly which commands (counted from the start of the document) should be extracted and which not. This might be useful for extracting specific slides from a presentation and use them in a new file.\n"
+"\n"
+"date: 2011-09-30 18:51:09 +0000"
+msgstr ""
-#. summary(texlive-isonums:texlive-isonums-doc)
+#. summary(texlive-specs-h:texlive-extract-doc)
#, fuzzy
-msgid "Documentation for texlive-isonums"
+msgid "Documentation for texlive-extract"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-isorot:texlive-isorot-doc)
+#. description(texlive-specs-h:texlive-extract-doc)
#, fuzzy
-msgid "Documentation for texlive-isorot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-extract"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-isotope:texlive-isotope-doc)
-#, fuzzy
-msgid "Documentation for texlive-isotope"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-filesystem:texlive-extratools)
+msgid "Utilities like DviToDvi, PSToPS, and LaCheck"
+msgstr ""
-#. summary(texlive-issuulinks:texlive-issuulinks-doc)
+#. description(texlive-filesystem:texlive-extratools)
#, fuzzy
-msgid "Documentation for texlive-issuulinks"
-msgstr "Dokumentace pro adaptx"
+msgid ""
+"The LaCheck utility is a syntax checker for LaTeX documents.\n"
+"\n"
+"The DviToDvi utilities are\n"
+"\n"
+"dvibook rearranges pages into book signatures, adds blank pages as needed dviselect selects pages and page ranges dvitodvi performs general page rearrangement of selected pages dviconcat concatenation of DVI files\n"
+"\n"
+"Three simple scripts for scaling DIN A4 pages and rearranging two by two onto a DIN A4 page (a4toa5) are included. The number of pages must be even (which can be done by odd2even or dvibook)."
+msgstr ""
+"Tento balíček obsahuje několik programů pro zpracovávání DVI souborů. Programy umožňují vybírat a přeskupovat jednotlivé stránky, vytvářet tiskové archy pro tisk knih a slučovat stránky pro tisk.\n"
+"\n"
+" dvibook přeskupuje stránky do tiskových archů, v případě potřeby přidává prázdné stránky\n"
+"\n"
+"dviselect vybírá jednotlivé stránky a rozsahy stránek\n"
+"\n"
+"dvitodvi provádí obecné operace s vybranými stránkami včetně jejich přeskupování\n"
+"\n"
+"dviconcat zřetězuje DVI soubory\n"
+"\n"
+"Balíček obsahuje i tři jednoduché skripty pro zmenšení stránek z formátu A4 na polovinu a umístění čtyř zmenšených stránek na plochu jedné stránky A4 (a4toa5). Je třeba, aby počet stránek byl sudý, čehož lze dosáhnout programem odd2even nebo dvibook."
-#. summary(texlive-itnumpar:texlive-itnumpar-doc)
-#, fuzzy
-msgid "Documentation for texlive-itnumpar"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-extsizes)
+msgid "Extend the standard classes' size options"
+msgstr ""
-#. summary(texlive-iwhdp:texlive-iwhdp-doc)
-#, fuzzy
-msgid "Documentation for texlive-iwhdp"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-extsizes)
+msgid ""
+"Provides classes extarticle, extreport, extletter, extbook and extproc which provide for documents with a base font size from 8-20pt.\n"
+"\n"
+"date: 2013-10-31 11:53:24 +0000"
+msgstr ""
-#. summary(texlive-iwona:texlive-iwona-doc)
+#. summary(texlive-specs-h:texlive-extsizes-doc)
#, fuzzy
-msgid "Documentation for texlive-iwona"
+msgid "Documentation for texlive-extsizes"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-jablantile:texlive-jablantile-doc)
+#. description(texlive-specs-h:texlive-extsizes-doc)
#, fuzzy
-msgid "Documentation for texlive-jablantile"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-extsizes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jadetex:texlive-jadetex-doc)
-#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-jadetex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-facsimile)
+msgid "Document class for preparing faxes"
+msgstr ""
-#. summary(texlive-jamtimes:texlive-jamtimes-doc)
-#, fuzzy
-msgid "Documentation for texlive-jamtimes"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-facsimile)
+msgid ""
+"The facsimile class provides a simple interface for creating a document for sending as a fax, with LaTeX. The class covers two areas: First, a title page is created with a detailed fax header; second, every page gets headers and footers so that the recipient can be sure that every page has been received and all pages are complete, and in the correct order. The class evolved from the fax package, and provides much better language support.\n"
+"\n"
+"date: 2013-12-24 19:21:44 +0000"
+msgstr ""
-#. summary(texlive-japanese:texlive-japanese-doc)
+#. summary(texlive-specs-h:texlive-facsimile-doc)
#, fuzzy
-msgid "Documentation for texlive-japanese"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for javamail."
+msgid "Documentation for texlive-facsimile"
+msgstr "Dokumentace javamail."
-#. summary(texlive-japanese-otf:texlive-japanese-otf-doc)
+#. description(texlive-specs-h:texlive-facsimile-doc)
#, fuzzy
-msgid "Documentation for texlive-japanese-otf"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-facsimile"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-japanese-otf-uptex:texlive-japanese-otf-uptex-doc)
-#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-japanese-otf-uptex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-factura)
+msgid "Write invoices according to Venezuelan law"
+msgstr ""
-#. summary(texlive-jfontmaps:texlive-jfontmaps-doc)
-#, fuzzy
-msgid "Documentation for texlive-jfontmaps"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-factura)
+msgid ""
+"The class provides convenient means for writing invoices, according to the requirements of SENIAT legislation (tax collecting entity of the Bolivarian Republic of Venezuela). The author suggests that the class may well be re-usable for other jurisdictions, by rather simple editing.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-jknapltx:texlive-jknapltx-doc)
+#. summary(texlive-specs-h:texlive-factura-doc)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-jknapltx"
+msgid "Documentation for texlive-factura"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-jlabels:texlive-jlabels-doc)
+#. description(texlive-specs-h:texlive-factura-doc)
#, fuzzy
-msgid "Documentation for texlive-jlabels"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-factura"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jmlr:texlive-jmlr-doc)
-#, fuzzy
-msgid "Documentation for texlive-jmlr"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-facture)
+msgid "Generate an invoice"
+msgstr "Generujte fakturu"
-#. summary(texlive-jneurosci:texlive-jneurosci-doc)
-#, fuzzy
-msgid "Documentation for texlive-jneurosci"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-facture)
+msgid ""
+"Une classe simple permettant de produite une facture, avec ou sans TVA, avec gestion d'une adresse differente pour la livraison et pour la facturation. A simple class that allows production of an invoice, with or without VAT; different addresses for delivery and for billing are permitted.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-jpsj:texlive-jpsj-doc)
+#. summary(texlive-specs-h:texlive-facture-doc)
#, fuzzy
-msgid "Documentation for texlive-jpsj"
+msgid "Documentation for texlive-facture"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-js-misc:texlive-js-misc-doc)
+#. description(texlive-specs-h:texlive-facture-doc)
#, fuzzy
-msgid "Documentation for texlive-js-misc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-facture"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jsclasses:texlive-jsclasses-doc)
+#. summary(texlive-specs-h:texlive-faktor)
#, fuzzy
-msgid "Documentation for texlive-jsclasses"
-msgstr "HTML dokumentace pro GNU C Library"
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset quotient structures with LaTeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. summary(texlive-junicode:texlive-junicode-doc)
-#, fuzzy
-msgid "Documentation for texlive-junicode"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-faktor)
+msgid ""
+"The package provides the means to typeset factor structures, as are used in many areas of algebraic notation. The structure is similar to the 'A/B' that is provided by the nicefrac package (part of the units distribution), and by the xfrac package; the most obvious difference is that the numerator and denominator's sizes do not change in the \\faktor command.\n"
+"\n"
+"date: 2012-05-08 19:36:46 +0000"
+msgstr ""
-#. summary(texlive-jura:texlive-jura-doc)
+#. summary(texlive-specs-h:texlive-faktor-doc)
#, fuzzy
-msgid "Documentation for texlive-jura"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-faktor"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-juraabbrev:texlive-juraabbrev-doc)
+#. description(texlive-specs-h:texlive-faktor-doc)
#, fuzzy
-msgid "Documentation for texlive-juraabbrev"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-faktor"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jurabib:texlive-jurabib-doc)
+#. summary(texlive-specs-h:texlive-fancybox)
+msgid "Variants of \\fbox and other games with boxes"
+msgstr ""
+
+#. description(texlive-specs-h:texlive-fancybox)
+msgid ""
+"Provides variants of \\fbox: \\shadowbox, \\doublebox, \\ovalbox, \\Ovalbox, with helpful tools for using box macros and flexible verbatim macros. You can box mathematics, floats, center, flushleft, and flushright, lists, and pages.\n"
+"\n"
+"date: 2011-10-26 06:45:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-h:texlive-fancybox-doc)
#, fuzzy
-msgid "Documentation for texlive-jurabib"
+msgid "Documentation for texlive-fancybox"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-juramisc:texlive-juramisc-doc)
+#. description(texlive-specs-h:texlive-fancybox-doc)
#, fuzzy
-msgid "Documentation for texlive-juramisc"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-fancybox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jurarsp:texlive-jurarsp-doc)
-#, fuzzy
-msgid "Documentation for texlive-jurarsp"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-h:texlive-fancyhdr)
+msgid "Extensive control of page headers and footers in LaTeX2e"
+msgstr ""
-#. summary(texlive-jvlisting:texlive-jvlisting-doc)
+#. description(texlive-specs-h:texlive-fancyhdr)
+msgid ""
+"The package provides extensive facilities, both for constructing headers and footers, and for controlling their use (for example, at times when LaTeX would automatically change the heading style in use).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-h:texlive-fancyhdr-doc)
#, fuzzy
-msgid "Documentation for texlive-jvlisting"
+msgid "Documentation for texlive-fancyhdr"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-kantlipsum:texlive-kantlipsum-doc)
+#. description(texlive-specs-h:texlive-fancyhdr-doc)
#, fuzzy
-msgid "Documentation for texlive-kantlipsum"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-fancyhdr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-karnaugh:texlive-karnaugh-doc)
+#. summary(texlive-specs-h:texlive-fancyhdr-it)
#, fuzzy
-msgid "Documentation for texlive-karnaugh"
-msgstr "Dokumentace pro castor"
+#| msgid "Italian translations for KOffice"
+msgid "Italian translation of fancyhdr documentation"
+msgstr "Italské překlady pro KOffice"
-#. summary(texlive-kastrup:texlive-kastrup-doc)
+#. description(texlive-specs-h:texlive-fancyhdr-it)
+msgid ""
+"The translation is of documentation provided with the fancyhdr package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-h:texlive-fancynum)
+msgid "Typeset numbers"
+msgstr ""
+
+#. description(texlive-specs-h:texlive-fancynum)
+msgid ""
+"A LaTeX package for typesetting numbers, in particular floating point numbers, such as you find in program output.\n"
+"\n"
+"date: 2012-04-17 14:58:00 +0000"
+msgstr ""
+
+#. summary(texlive-specs-h:texlive-fancynum-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-kastrup"
+msgid "Documentation for texlive-fancynum"
msgstr "Dokumentace pro castor"
-#. summary(texlive-kdgdocs:texlive-kdgdocs-doc)
+#. description(texlive-specs-h:texlive-fancynum-doc)
#, fuzzy
-msgid "Documentation for texlive-kdgdocs"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fancynum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-kerkis:texlive-kerkis-doc)
-#, fuzzy
-msgid "Documentation for texlive-kerkis"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fancypar)
+msgid "Decoration of individual paragraphs"
+msgstr ""
-#. summary(texlive-kerntest:texlive-kerntest-doc)
-#, fuzzy
-msgid "Documentation for texlive-kerntest"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-fancypar)
+msgid ""
+"Decorates individual paragraphs of a document, offering five pre-defined styles. The command offers an optional 'key-value' argument with the user may define parameters of the selected style. Predefined styles offer a spiral-notebook, a zebra-like, a dashed, a marked design, and an underlined style. Users may also define their own styles. Decorated paragraphs may not include displayed mathematics.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-keycommand:texlive-keycommand-doc)
+#. summary(texlive-specs-h:texlive-fancypar-doc)
#, fuzzy
-msgid "Documentation for texlive-keycommand"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-fancypar"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-keyreader:texlive-keyreader-doc)
+#. description(texlive-specs-h:texlive-fancypar-doc)
#, fuzzy
-msgid "Documentation for texlive-keyreader"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-fancypar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-keystroke:texlive-keystroke-doc)
-#, fuzzy
-msgid "Documentation for texlive-keystroke"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fancyref)
+msgid "A LaTeX package for fancy cross-referencing"
+msgstr ""
-#. summary(texlive-keyval2e:texlive-keyval2e-doc)
-#, fuzzy
-msgid "Documentation for texlive-keyval2e"
-msgstr "Dokumentace pro gawk"
+#. description(texlive-specs-h:texlive-fancyref)
+msgid ""
+"Provides fancy cross-referencing support, based on the package's reference commands (\\fref and \\Fref) that recognise what sort of object is being referenced. So, for example, the label for a \\section would be expected to be of the form 'sec:foo': the package would recognise the 'sec:' part.\n"
+"\n"
+"date: 2012-07-11 15:40:28 +0000"
+msgstr ""
-#. summary(texlive-kix:texlive-kix-doc)
+#. summary(texlive-specs-h:texlive-fancyref-doc)
#, fuzzy
-msgid "Documentation for texlive-kix"
+msgid "Documentation for texlive-fancyref"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-kixfont:texlive-kixfont-doc)
+#. description(texlive-specs-h:texlive-fancyref-doc)
#, fuzzy
-msgid "Documentation for texlive-kixfont"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fancyref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-kluwer:texlive-kluwer-doc)
-#, fuzzy
-msgid "Documentation for texlive-kluwer"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fancytabs)
+msgid "Fancy page border tabs"
+msgstr ""
-#. summary(texlive-knitting:texlive-knitting-doc)
-#, fuzzy
-msgid "Documentation for texlive-knitting"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-fancytabs)
+msgid ""
+"The package can typeset tabs on the side of a page. It requires TikZ from the pgf bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-knittingpattern:texlive-knittingpattern-doc)
+#. summary(texlive-specs-h:texlive-fancytabs-doc)
#, fuzzy
-msgid "Documentation for texlive-knittingpattern"
+msgid "Documentation for texlive-fancytabs"
msgstr "Dokumentace pro castor"
-#. summary(texlive-knuth:texlive-knuth-doc)
+#. description(texlive-specs-h:texlive-fancytabs-doc)
#, fuzzy
-msgid "Documentation for texlive-knuth"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fancytabs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-koma-moderncvclassic:texlive-koma-moderncvclassic-doc)
-#, fuzzy
-msgid "Documentation for texlive-koma-moderncvclassic"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fancytooltips)
+msgid "Include a wide range of material in PDF tooltips"
+msgstr ""
-#. summary(texlive-koma-script:texlive-koma-script-doc)
-#, fuzzy
-msgid "Documentation for texlive-koma-script"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-fancytooltips)
+msgid ""
+"The package was inspired by the cooltooltips package. In contrast to cooltooltips, fancytooltips allows inclusion of tooltips which contain arbitrary TeX material or a series of TeX materials (animated graphics) from an external PDF file. To see the tooltips, you have to open the files in Adobe Reader. The links and JavaScripts are inserted using eforms package from the AcroTeX bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-koma-script-sfs:texlive-koma-script-sfs-doc)
+#. summary(texlive-specs-h:texlive-fancytooltips-doc)
#, fuzzy
-msgid "Documentation for texlive-koma-script-sfs"
+msgid "Documentation for texlive-fancytooltips"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-kpathsea:texlive-kpathsea-doc)
+#. description(texlive-specs-h:texlive-fancytooltips-doc)
#, fuzzy
-msgid "Documentation for texlive-kpathsea"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fancytooltips"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-kpfonts:texlive-kpfonts-doc)
-#, fuzzy
-msgid "Documentation for texlive-kpfonts"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fancyvrb)
+msgid "Sophisticated verbatim text"
+msgstr ""
-#. summary(texlive-ktv-texdata:texlive-ktv-texdata-doc)
-#, fuzzy
-msgid "Documentation for texlive-ktv-texdata"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-fancyvrb)
+msgid ""
+"Flexible handling of verbatim text including: verbatim commands in footnotes; a variety of verbatim environments with many parameters; ability to define new customized verbatim environments; save and restore verbatim text and environments; write and read files in verbatim mode; build \"example\" environments (showing both result and verbatim source).\n"
+"\n"
+"date: 2011-10-06 13:38:07 +0000"
+msgstr ""
-#. summary(texlive-kurier:texlive-kurier-doc)
+#. summary(texlive-specs-h:texlive-fancyvrb-doc)
#, fuzzy
-msgid "Documentation for texlive-kurier"
+msgid "Documentation for texlive-fancyvrb"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-l3experimental:texlive-l3experimental-doc)
+#. description(texlive-specs-h:texlive-fancyvrb-doc)
#, fuzzy
-msgid "Documentation for texlive-l3experimental"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fancyvrb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-l3kernel:texlive-l3kernel-doc)
+#. summary(texlive-specs-h:texlive-fandol)
#, fuzzy
-msgid "Documentation for texlive-l3kernel"
-msgstr "Dokumentace pro castor"
+#| msgid "LaTeX Macro Package for CJK (Chinese/Japanese/Korean)"
+msgid "Four basic fonts for Chinese typesetting"
+msgstr "LaTeXové makro pro CJK (čínština/japonština/korejština)"
-#. summary(texlive-l3packages:texlive-l3packages-doc)
-#, fuzzy
-msgid "Documentation for texlive-l3packages"
-msgstr "HTML dokumentace pro GNU C Library"
+#. description(texlive-specs-h:texlive-fandol)
+msgid ""
+"Fandol fonts designed for Chinese typesetting. The current version contains four styles: Song, Hei, Kai, Fang. All fonts are in OpenType format.\n"
+"\n"
+"date: 2014-04-26 17:51:19 +0000"
+msgstr ""
-#. summary(texlive-labbook:texlive-labbook-doc)
+#. summary(texlive-specs-h:texlive-fandol-doc)
#, fuzzy
-msgid "Documentation for texlive-labbook"
+msgid "Documentation for texlive-fandol"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-labelcas:texlive-labelcas-doc)
+#. description(texlive-specs-h:texlive-fandol-doc)
#, fuzzy
-msgid "Documentation for texlive-labelcas"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fandol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-labels:texlive-labels-doc)
+#. summary(texlive-specs-h:texlive-fandol-fonts)
#, fuzzy
-msgid "Documentation for texlive-labels"
-msgstr "Dokumentace pro adaptx"
+msgid "Severed fonts for texlive-fandol"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-langcode:texlive-langcode-doc)
+#. description(texlive-specs-h:texlive-fandol-fonts)
#, fuzzy
-msgid "Documentation for texlive-langcode"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-fandol"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-lapdf:texlive-lapdf-doc)
-#, fuzzy
-msgid "Documentation for texlive-lapdf"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fast-diagram)
+msgid "Easy generation of FAST diagrams"
+msgstr ""
-#. summary(texlive-lastpage:texlive-lastpage-doc)
-#, fuzzy
-msgid "Documentation for texlive-lastpage"
-msgstr "HTML dokumentace pro GNU C Library"
+#. description(texlive-specs-h:texlive-fast-diagram)
+msgid ""
+"The package provides simple means of producing FAST diagrams, using TikZ/pgf tools. FAST diagrams are useful for functional analysis techniques in design methods.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-latex:texlive-latex-doc)
+#. summary(texlive-specs-h:texlive-fast-diagram-doc)
#, fuzzy
-msgid "Documentation for texlive-latex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-fast-diagram"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-latex-fonts:texlive-latex-fonts-doc)
+#. description(texlive-specs-h:texlive-fast-diagram-doc)
#, fuzzy
-msgid "Documentation for texlive-latex-fonts"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fast-diagram"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latex-tds:texlive-latex-tds-doc)
-#, fuzzy
-msgid "Documentation for texlive-latex-tds"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fbb)
+msgid "A free Bembo-like font"
+msgstr ""
-#. summary(texlive-latex2man:texlive-latex2man-doc)
-#, fuzzy
-msgid "Documentation for texlive-latex2man"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-fbb)
+msgid ""
+"The package provides a Bembo-like font package based on Cardo but with many modifications, adding Bold Italic, small caps in all styles, six figure choices in all styles, updated kerning tables, added figure tables and corrected f-ligatures. Both OpenType and Adobe Type 1 versions are provided; all necessary support files are provided. The font works well with newtxmath's libertine option.\n"
+"\n"
+"date: 2014-04-26 17:51:19 +0000"
+msgstr ""
-#. summary(texlive-latexdiff:texlive-latexdiff-doc)
+#. summary(texlive-specs-h:texlive-fbb-doc)
#, fuzzy
-msgid "Documentation for texlive-latexdiff"
+msgid "Documentation for texlive-fbb"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-latexfileinfo-pkgs:texlive-latexfileinfo-pkgs-doc)
+#. description(texlive-specs-h:texlive-fbb-doc)
#, fuzzy
-msgid "Documentation for texlive-latexfileinfo-pkgs"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fbb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latexfileversion:texlive-latexfileversion-doc)
+#. summary(texlive-specs-h:texlive-fbb-fonts)
#, fuzzy
-msgid "Documentation for texlive-latexfileversion"
-msgstr "Dokumentace pro castor"
+msgid "Severed fonts for texlive-fbb"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-latexmk:texlive-latexmk-doc)
+#. description(texlive-specs-h:texlive-fbb-fonts)
#, fuzzy
-msgid "Documentation for texlive-latexmk"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-fbb"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-latexmp:texlive-latexmp-doc)
-#, fuzzy
-msgid "Documentation for texlive-latexmp"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fbithesis)
+msgid "Computer Science thesis class for University of Dortmund"
+msgstr ""
-#. summary(texlive-latexpand:texlive-latexpand-doc)
-#, fuzzy
-msgid "Documentation for texlive-latexpand"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-h:texlive-fbithesis)
+msgid ""
+"At the department of computer science at the University of Dortmund there are cardboard cover pages for research or internal reports like master/phd-theses. The main function of this LaTeX2e document-class is a replacement for the \\maketitle command to typeset a title page that is adjusted to these cover pages.\n"
+"\n"
+"date: 2012-02-09 19:33:55 +0000"
+msgstr ""
-#. summary(texlive-lato:texlive-lato-doc)
+#. summary(texlive-specs-h:texlive-fbithesis-doc)
#, fuzzy
-msgid "Documentation for texlive-lato"
+msgid "Documentation for texlive-fbithesis"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-layaureo:texlive-layaureo-doc)
+#. description(texlive-specs-h:texlive-fbithesis-doc)
#, fuzzy
-msgid "Documentation for texlive-layaureo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fbithesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-layouts:texlive-layouts-doc)
-#, fuzzy
-msgid "Documentation for texlive-layouts"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-h:texlive-fbs)
+msgid "BibTeX style for Frontiers in Bioscience"
+msgstr ""
-#. summary(texlive-lazylist:texlive-lazylist-doc)
-#, fuzzy
-msgid "Documentation for texlive-lazylist"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-h:texlive-fbs)
+msgid ""
+"A BibTeX style file made with custom-bib to fit Frontiers in Bioscience requirements: all authors, no et al, full author names, initials abbreviated; only abbreviated journal name italicised, no abbreviation dots; only year, no month, at end of reference; and DOI excluded, ISSN excluded.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-lcd:texlive-lcd-doc)
+#. summary(texlive-specs-i:texlive-fc)
#, fuzzy
-msgid "Documentation for texlive-lcd"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Fonts for TV Applications"
+msgid "Fonts for African languages"
+msgstr "Písma pro TV aplikace"
-#. summary(texlive-lcg:texlive-lcg-doc)
-#, fuzzy
-msgid "Documentation for texlive-lcg"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-fc)
+msgid ""
+"The fonts are provided as Metafont source, in the familiar arrangement of lots of (autogenerated) preamble files and a modest set of glyph specifications. (A similar arrangement appears in the ec and lh font bundles.)\n"
+"\n"
+"date: 2014-04-26 17:51:19 +0000"
+msgstr ""
-#. summary(texlive-lcyw:texlive-lcyw-doc)
+#. summary(texlive-specs-i:texlive-fc-doc)
#, fuzzy
-msgid "Documentation for texlive-lcyw"
+msgid "Documentation for texlive-fc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-leading:texlive-leading-doc)
+#. description(texlive-specs-i:texlive-fc-doc)
#, fuzzy
-msgid "Documentation for texlive-leading"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-leaflet:texlive-leaflet-doc)
-#, fuzzy
-msgid "Documentation for texlive-leaflet"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fcltxdoc)
+msgid "Macros for use in the author's documentation"
+msgstr ""
-#. summary(texlive-lecturer:texlive-lecturer-doc)
-#, fuzzy
-msgid "Documentation for texlive-lecturer"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+#. description(texlive-specs-i:texlive-fcltxdoc)
+msgid ""
+"The package is not advertised for public use, but is necessary for the support of others of the author's packages (which are compiled under the ltxdoc class).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-ledmac:texlive-ledmac-doc)
+#. summary(texlive-specs-i:texlive-fcltxdoc-doc)
#, fuzzy
-msgid "Documentation for texlive-ledmac"
+msgid "Documentation for texlive-fcltxdoc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-leftidx:texlive-leftidx-doc)
+#. description(texlive-specs-i:texlive-fcltxdoc-doc)
#, fuzzy
-msgid "Documentation for texlive-leftidx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fcltxdoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-leipzig:texlive-leipzig-doc)
-#, fuzzy
-msgid "Documentation for texlive-leipzig"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fdsymbol)
+msgid "A maths symbol font"
+msgstr ""
-#. summary(texlive-lettre:texlive-lettre-doc)
-#, fuzzy
-msgid "Documentation for texlive-lettre"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-fdsymbol)
+msgid ""
+"FdSymbol is a maths symbol font, designed as a companion to the Fedra family by Typotheque, but it might also fit other contemporary typefaces.\n"
+"\n"
+"date: 2014-04-26 18:03:33 +0000"
+msgstr ""
-#. summary(texlive-lettrine:texlive-lettrine-doc)
+#. summary(texlive-specs-i:texlive-fdsymbol-doc)
#, fuzzy
-msgid "Documentation for texlive-lettrine"
+msgid "Documentation for texlive-fdsymbol"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-levy:texlive-levy-doc)
+#. description(texlive-specs-i:texlive-fdsymbol-doc)
#, fuzzy
-msgid "Documentation for texlive-levy"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-fdsymbol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lewis:texlive-lewis-doc)
-#, fuzzy
-msgid "Documentation for texlive-lewis"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fdsymbol-fonts)
+msgid "Severed fonts for texlive-fdsymbol"
+msgstr ""
-#. summary(texlive-lexikon:texlive-lexikon-doc)
-#, fuzzy
-msgid "Documentation for texlive-lexikon"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-fdsymbol-fonts)
+msgid "The separated fonts package for texlive-fdsymbol"
+msgstr ""
-#. summary(texlive-lfb:texlive-lfb-doc)
-#, fuzzy
-msgid "Documentation for texlive-lfb"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-featpost)
+msgid "MetaPost macros for 3D"
+msgstr ""
-#. summary(texlive-lgreek:texlive-lgreek-doc)
-#, fuzzy
-msgid "Documentation for texlive-lgreek"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-featpost)
+msgid ""
+"These macros allow the production of three-dimensional schemes containing: angles, circles, cylinders, cones and spheres, among other things.\n"
+"\n"
+"date: 2013-07-31 06:21:57 +0000"
+msgstr ""
-#. summary(texlive-lgrx:texlive-lgrx-doc)
+#. summary(texlive-specs-i:texlive-featpost-doc)
#, fuzzy
-msgid "Documentation for texlive-lgrx"
+msgid "Documentation for texlive-featpost"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lh:texlive-lh-doc)
+#. description(texlive-specs-i:texlive-featpost-doc)
#, fuzzy
-msgid "Documentation for texlive-lh"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-featpost"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lhelp:texlive-lhelp-doc)
+#. summary(texlive-specs-i:texlive-fenixpar)
+msgid "One-shot changes to token registers such as \\everypar"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fenixpar)
+msgid ""
+"The bundle provides two packages, fenxitok and fenixpar. The fenixtok package provides user macros to add material to a token register; the material will be (automatically) removed from the token register when the register is executed. Material may be added either to the left or to the right, and care is taken not to override any redefinition that may be included in the token register itself. The fenixpar package uses the macros of fenixtok to provide a user interface to manipulation of the \\everypar token register. The packages require the e-TeX extensions; with them, they work either with Plain TeX or with LaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fenixpar-doc)
#, fuzzy
-msgid "Documentation for texlive-lhelp"
+msgid "Documentation for texlive-fenixpar"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-libertine:texlive-libertine-doc)
+#. description(texlive-specs-i:texlive-fenixpar-doc)
#, fuzzy
-msgid "Documentation for texlive-libertine"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fenixpar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-libgreek:texlive-libgreek-doc)
+#. summary(texlive-specs-i:texlive-fetamont)
+msgid "Extended version of Knuth's logo typeface"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fetamont)
+msgid ""
+"The fetamont typeface was designed in METAFONT and extends the Logo fonts to complete the T1 encoding. The designs of the glyphs A, E, F, M, N, O, P, S and T are based on the METAFONT constructions by D. E. Knuth. The glyphs Y and 1 imitate the shapes of the corresponding glyphs in the METATYPE1 logo.\n"
+"\n"
+"date: 2014-04-26 18:03:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fetamont-doc)
#, fuzzy
-msgid "Documentation for texlive-libgreek"
+msgid "Documentation for texlive-fetamont"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-librarian:texlive-librarian-doc)
+#. description(texlive-specs-i:texlive-fetamont-doc)
#, fuzzy
-msgid "Documentation for texlive-librarian"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-fetamont"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-librebaskerville:texlive-librebaskerville-doc)
+#. summary(texlive-specs-i:texlive-fetamont-fonts)
#, fuzzy
-msgid "Documentation for texlive-librebaskerville"
+msgid "Severed fonts for texlive-fetamont"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-libris:texlive-libris-doc)
+#. description(texlive-specs-i:texlive-fetamont-fonts)
#, fuzzy
-msgid "Documentation for texlive-libris"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "The separated fonts package for texlive-fetamont"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-linearA:texlive-linearA-doc)
-#, fuzzy
-msgid "Documentation for texlive-linearA"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+#. summary(texlive-specs-i:texlive-feupphdteses)
+msgid "Typeset Engineering PhD theses at the University of Porto"
+msgstr ""
-#. summary(texlive-linegoal:texlive-linegoal-doc)
-#, fuzzy
-msgid "Documentation for texlive-linegoal"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-feupphdteses)
+msgid ""
+"A complete template for thesis/works of Faculdade de Engenharia da Universidade do Porto (FEUP) Faculty of Engineering University of Porto.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-lineno:texlive-lineno-doc)
+#. summary(texlive-specs-i:texlive-feupphdteses-doc)
#, fuzzy
-msgid "Documentation for texlive-lineno"
+msgid "Documentation for texlive-feupphdteses"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-linguex:texlive-linguex-doc)
+#. description(texlive-specs-i:texlive-feupphdteses-doc)
#, fuzzy
-msgid "Documentation for texlive-linguex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-feupphdteses"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lipsum:texlive-lipsum-doc)
-#, fuzzy
-msgid "Documentation for texlive-lipsum"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-feyn)
+msgid "A font for in-text Feynman diagrams"
+msgstr ""
-#. summary(texlive-lisp-on-tex:texlive-lisp-on-tex-doc)
+#. description(texlive-specs-i:texlive-feyn)
+msgid ""
+"Feyn may be used to produce relatively simple Feynman diagrams within equations in a LaTeX document. While the feynmf package is good at drawing large diagrams for figures, the present package and its fonts allow diagrams within equations or text, at a matching size. The fonts are distributed as Metafont source, and macros for their use are also provided.\n"
+"\n"
+"date: 2012-05-31 16:53:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-feyn-doc)
#, fuzzy
-msgid "Documentation for texlive-lisp-on-tex"
+msgid "Documentation for texlive-feyn"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-listbib:texlive-listbib-doc)
+#. description(texlive-specs-i:texlive-feyn-doc)
#, fuzzy
-msgid "Documentation for texlive-listbib"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-feyn"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-listing:texlive-listing-doc)
+#. summary(texlive-specs-i:texlive-feynmf)
+msgid "Macros and fonts for creating Feynman (and other) diagrams"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-feynmf)
+msgid ""
+"The feynmf package provides an interface to Metafont (inspired by the facilities of mfpic) to use simple structure specifications to produce relatively complex diagrams. (The feynmp package, also part of this bundle, uses MetaPost in the same way.) While the package was designed for Feynman diagrams, it could in principle be used for diagrams in graph and similar theories, where the structure is semi-algorithmically determined.\n"
+"\n"
+"date: 2012-05-29 11:27:24 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-feynmf-doc)
#, fuzzy
-msgid "Documentation for texlive-listing"
+msgid "Documentation for texlive-feynmf"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-listings:texlive-listings-doc)
+#. description(texlive-specs-i:texlive-feynmf-doc)
#, fuzzy
-msgid "Documentation for texlive-listings"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-feynmf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-listings-ext:texlive-listings-ext-doc)
+#. summary(texlive-specs-i:texlive-feynmp-auto)
+msgid "Automatic processing of feynmp graphics"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-feynmp-auto)
+msgid ""
+"The package takes care of running Metapost on the output files produced by the feynmp package, so that the compiled pictures will be available in the next run of LaTeX. The package honours options that apply to feynmp.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-feynmp-auto-doc)
#, fuzzy
-msgid "Documentation for texlive-listings-ext"
+msgid "Documentation for texlive-feynmp-auto"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-listliketab:texlive-listliketab-doc)
+#. description(texlive-specs-i:texlive-feynmp-auto-doc)
#, fuzzy
-msgid "Documentation for texlive-listliketab"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-feynmp-auto"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-listofsymbols:texlive-listofsymbols-doc)
-#, fuzzy
-msgid "Documentation for texlive-listofsymbols"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fge)
+msgid "A font for Frege's Grundgesetze der Arithmetik"
+msgstr ""
-#. summary(texlive-lithuanian:texlive-lithuanian-doc)
+#. description(texlive-specs-i:texlive-fge)
+msgid ""
+"The fonts are provided as Metafont source and Adobe Type 1 (pfb) files. A small LaTeX package (fge) is included.\n"
+"\n"
+"date: 2014-04-26 18:03:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fge-doc)
#, fuzzy
-msgid "Documentation for texlive-lithuanian"
+msgid "Documentation for texlive-fge"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-liturg:texlive-liturg-doc)
+#. description(texlive-specs-i:texlive-fge-doc)
#, fuzzy
-msgid "Documentation for texlive-liturg"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fge"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lkproof:texlive-lkproof-doc)
+#. summary(texlive-specs-i:texlive-fge-fonts)
+msgid "Severed fonts for texlive-fge"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fge-fonts)
+msgid "The separated fonts package for texlive-fge"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fifinddo-info)
+msgid "German HTML beamer presentation on nicetext and morehype"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fifinddo-info)
+msgid ""
+"The bundle: exhibits the process of making an \"HTML beamer presentation\" with the blogdot package from the morehype bundle, and HTML generation based on the fifinddo package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fifinddo-info-doc)
#, fuzzy
-msgid "Documentation for texlive-lkproof"
+msgid "Documentation for texlive-fifinddo-info"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lm:texlive-lm-doc)
+#. description(texlive-specs-i:texlive-fifinddo-info-doc)
#, fuzzy
-msgid "Documentation for texlive-lm"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fifinddo-info"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lm-math:texlive-lm-math-doc)
+#. summary(texlive-specs-i:texlive-fifo-stack)
+msgid "FIFO and stack implementation for package writers"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fifo-stack)
+msgid ""
+"A LaTeX implementation of a combined FIFO Stack modified from the existing stack package by Benjamin Bayart. The package renames the original's \\Push and \\Pop commands \\FSPush and \\FSPop, and which work on the top/end of the FIFO/Stack), and adds the ability to \\FSUnshift and \\FSShift from the the bottom(front) of the FIFO/Stack.\n"
+"\n"
+"date: 2014-04-08 09:20:21 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fifo-stack-doc)
#, fuzzy
-msgid "Documentation for texlive-lm-math"
+msgid "Documentation for texlive-fifo-stack"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lmake:texlive-lmake-doc)
+#. description(texlive-specs-i:texlive-fifo-stack-doc)
#, fuzzy
-msgid "Documentation for texlive-lmake"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fifo-stack"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-locality:texlive-locality-doc)
+#. summary(texlive-specs-i:texlive-fig4latex)
+msgid "Management of figures for large LaTeX documents"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fig4latex)
+msgid ""
+"Fig4LaTeX simplifies management of the figures in a large LaTeX document. Fig4LaTeX is appropriate for projects that include figures with graphics created by XFig -- in particular, graphics which use the combined PS/LaTeX (or PDF/LaTeX) export method. An example document (with its output) is provided.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fig4latex-doc)
#, fuzzy
-msgid "Documentation for texlive-locality"
+msgid "Documentation for texlive-fig4latex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-localloc:texlive-localloc-doc)
+#. description(texlive-specs-i:texlive-fig4latex-doc)
#, fuzzy
-msgid "Documentation for texlive-localloc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fig4latex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-logbox:texlive-logbox-doc)
+#. summary(texlive-specs-i:texlive-figbas)
+msgid "Mini-fonts for figured-bass notation in music"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-figbas)
+msgid ""
+"This package consists of three mini-fonts (and associated metrics) of conventional ligatures for the figured-bass notations 2+, 4+, 5+, 6+ and 9+ in music manuscripts. The fonts are usable with Computer Modern Roman and Sans, and Palatino/Palladio, respectively.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-figbas-doc)
#, fuzzy
-msgid "Documentation for texlive-logbox"
+msgid "Documentation for texlive-figbas"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-logical-markup-utils:texlive-logical-markup-utils-doc)
+#. description(texlive-specs-i:texlive-figbas-doc)
#, fuzzy
-#| msgid "Documentation for javamail."
-msgid "Documentation for texlive-logical-markup-utils"
-msgstr "Dokumentace javamail."
+msgid "This package includes the documentation for texlive-figbas"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-logicpuzzle:texlive-logicpuzzle-doc)
+#. summary(texlive-specs-i:texlive-figbas-fonts)
+msgid "Severed fonts for texlive-figbas"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-figbas-fonts)
+msgid "The separated fonts package for texlive-figbas"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-figbib)
+msgid "Organize figure databases with BibTeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-figbib)
+msgid ""
+"FigBib lets you organize your figures in BibTeX databases. Some FigBib features are: Store and manage figures in a BibTeX database; Include figures in your LaTeX document with one short command; Generate a List of Figures containing more/other information than the figure captions; Control with one switch where to output the figures, either as usual float objects or in a separate part at the end of your document.\n"
+"\n"
+"date: 2013-12-28 16:03:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-figbib-doc)
#, fuzzy
-msgid "Documentation for texlive-logicpuzzle"
+msgid "Documentation for texlive-figbib"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-logpap:texlive-logpap-doc)
+#. description(texlive-specs-i:texlive-figbib-doc)
#, fuzzy
-msgid "Documentation for texlive-logpap"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-figbib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-logreq:texlive-logreq-doc)
+#. summary(texlive-specs-i:texlive-figflow)
+msgid "Flow text around a figure"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-figflow)
+msgid ""
+"Provides a Plain TeX macro \\figflow that allows one to insert a figure into an area inset into a paragraph. Command arguments are width and height of the figure, and the figure (and its caption) itself. Usage details are to be found in the TeX file itself. The package does not work with LaTeX; packages such as wrapfig, floatflt and picins support the needs of LaTeX users in this area.\n"
+"\n"
+"date: 2012-07-11 21:21:34 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-figflow-doc)
#, fuzzy
-msgid "Documentation for texlive-logreq"
+msgid "Documentation for texlive-figflow"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-longnamefilelist:texlive-longnamefilelist-doc)
+#. description(texlive-specs-i:texlive-figflow-doc)
#, fuzzy
-msgid "Documentation for texlive-longnamefilelist"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-figflow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-loops:texlive-loops-doc)
+#. summary(texlive-specs-i:texlive-figsize)
+msgid "Auto-size graphics"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-figsize)
+msgid ""
+"The FigSize package enables automatic sizing of graphics, especially when including graphics with the graphicx package. The user only has to specify the number of graphics that should fit to a page or fraction there of and the package will dynamically calculate the correct graphics sizes relative to the page size. Thus, graphics can be auto-sized to fill a whole page or fraction and manual changes of graphic sizes are never needed when changing document layouts. Finally, the package's dynamic lengths can be used to allow other document element sizes to be dynamic.\n"
+"\n"
+"date: 2012-07-11 21:21:34 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-figsize-doc)
#, fuzzy
-msgid "Documentation for texlive-loops"
+msgid "Documentation for texlive-figsize"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lpic:texlive-lpic-doc)
+#. description(texlive-specs-i:texlive-figsize-doc)
#, fuzzy
-msgid "Documentation for texlive-lpic"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-figsize"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lps:texlive-lps-doc)
+#. summary(texlive-specs-i:texlive-filecontents)
+msgid "Extended filecontents and filecontents* environments"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-filecontents)
+msgid ""
+"LaTeX2e's filecontents and filecontents* environments enable a LaTeX source file to generate external files as it runs through LaTeX. However, there are two limitations of these environments: they refuse to overwrite existing files, and they can only be used in the preamble of a document. The filecontents package removes these limitations, letting you overwrite existing files and letting you use filecontents/filecontents* anywhere.\n"
+"\n"
+"date: 2012-01-12 18:29:56 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-filecontents-doc)
#, fuzzy
-msgid "Documentation for texlive-lps"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for the International Fonts"
+msgid "Documentation for texlive-filecontents"
+msgstr "Dokumentace k mezinárodním fontům"
-#. summary(texlive-lsc:texlive-lsc-doc)
+#. description(texlive-specs-i:texlive-filecontents-doc)
#, fuzzy
-msgid "Documentation for texlive-lsc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-filecontents"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lstaddons:texlive-lstaddons-doc)
+#. summary(texlive-specs-i:texlive-filedate)
+msgid "Access and compare info and modification dates"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-filedate)
+msgid ""
+"The package provides basic access to the date of a LaTeX source file according to its \\Provides... entry (the \"info date\") as well as to its modification date according to \\pdffilemoddate if the latter is available.\n"
+"\n"
+"date: 2013-03-28 17:13:03 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-filedate-doc)
#, fuzzy
-msgid "Documentation for texlive-lstaddons"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-filedate"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-ltablex:texlive-ltablex-doc)
+#. description(texlive-specs-i:texlive-filedate-doc)
#, fuzzy
-msgid "Documentation for texlive-ltablex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-filedate"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ltabptch:texlive-ltabptch-doc)
+#. summary(texlive-specs-i:texlive-filehook)
+msgid "Hooks for input files"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-filehook)
+msgid ""
+"The package provides several file hooks (AtBegin, AtEnd, ...) for files read by \\input, \\include and \\InputIfFileExists. General hooks for all such files (e.g. all \\include'd ones) and file specific hooks only used for named files are provided; two hooks are provided for the end of \\included files -- one before, and one after the final \\clearpage.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-filehook-doc)
#, fuzzy
-msgid "Documentation for texlive-ltabptch"
+msgid "Documentation for texlive-filehook"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ltxdockit:texlive-ltxdockit-doc)
+#. description(texlive-specs-i:texlive-filehook-doc)
#, fuzzy
-msgid "Documentation for texlive-ltxdockit"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-filehook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ltxfileinfo:texlive-ltxfileinfo-doc)
+#. summary(texlive-specs-i:texlive-fileinfo)
+msgid "Enhanced display of LaTeX File Information"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fileinfo)
+msgid ""
+"The bundle provides two packages, readprov and myfilist. The readprov package provides a means of reading file information without loading the body of the file. The myfilist package uses readprov and controls what \\listfiles will report.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fileinfo-doc)
#, fuzzy
-msgid "Documentation for texlive-ltxfileinfo"
+msgid "Documentation for texlive-fileinfo"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ltxindex:texlive-ltxindex-doc)
+#. description(texlive-specs-i:texlive-fileinfo-doc)
#, fuzzy
-msgid "Documentation for texlive-ltxindex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fileinfo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ltxkeys:texlive-ltxkeys-doc)
+#. summary(texlive-specs-i:texlive-filemod)
+msgid "Provide file modification times, and compare them"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-filemod)
+msgid ""
+"The package provides macros to read and compare the modification dates of files. The files may be .tex files, images or other files (as long as they can be found by LaTeX). It uses the \\pdffilemoddate primitive of pdfLaTeX to find the file modification date as PDF date string, parses the string and returns the value to the user. The package will also work for DVI output with recent versions of the LaTeX compiler which uses pdfLaTeX in DVI mode. The functionality is provided by purely expandable macros or by faster but non-expandable ones.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-filemod-doc)
#, fuzzy
-msgid "Documentation for texlive-ltxkeys"
+msgid "Documentation for texlive-filemod"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ltxnew:texlive-ltxnew-doc)
+#. description(texlive-specs-i:texlive-filemod-doc)
#, fuzzy
-msgid "Documentation for texlive-ltxnew"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-filemod"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ltxtools:texlive-ltxtools-doc)
+#. summary(texlive-filesystem)
+msgid "Basic file system of TeX Live"
+msgstr ""
+
+#. description(texlive-filesystem)
+msgid "The basic file system layout for TeX Live installation."
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-finbib)
+msgid "A Finnish version of plain.bst"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-finbib)
+msgid ""
+"The finbib package\n"
+"\n"
+"date: 2012-05-20 22:09:46 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-findhyph)
+msgid "Find hyphenated words in a document"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-findhyph)
+msgid ""
+"Findhyph is a Perl script that will analyse the log file from running your document with \\tracingparagraphs=1 set. The output contains enough context to enable you to find the hyphenated word that's being referenced.\n"
+"\n"
+"date: 2013-06-21 00:36:55 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-findhyph-doc)
#, fuzzy
-msgid "Documentation for texlive-ltxtools"
+msgid "Documentation for texlive-findhyph"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lua-alt-getopt:texlive-lua-alt-getopt-doc)
+#. description(texlive-specs-i:texlive-findhyph-doc)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-lua-alt-getopt"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-findhyph"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lua-check-hyphen:texlive-lua-check-hyphen-doc)
+#. summary(texlive-specs-i:texlive-fink)
+msgid "The LaTeX2e File Name Keeper"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fink)
+msgid ""
+"This package \"looks over your shoulder\" and keeps track of files \\input'ed (the LaTeX way) or \\include'ed in your document. You then have permanent access to the name of the file currently being processed through the macro \\finkfile. FiNK also comes with support for AUC-TeX. As of version 2.2.1, FiNK has been deprecated and is not maintained anymore. People interested in FiNK's functionality are invited to use a package named currfile instead.\n"
+"\n"
+"date: 2012-05-20 22:09:46 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fink-doc)
#, fuzzy
-msgid "Documentation for texlive-lua-check-hyphen"
+msgid "Documentation for texlive-fink"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lua-visual-debug:texlive-lua-visual-debug-doc)
+#. description(texlive-specs-i:texlive-fink-doc)
#, fuzzy
-msgid "Documentation for texlive-lua-visual-debug"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fink"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lua2dox:texlive-lua2dox-doc)
+#. summary(texlive-specs-i:texlive-finstrut)
+msgid "Adjust behaviour of the ends of footnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-finstrut)
+msgid ""
+"The LaTeX internal command \\@finalstrut is used automatically used at the end of footnote texts to insert a strut to avoid mis-spacing of multiple footnotes. Unfortunately the command can cause a blank line at the end of a footnote. The package provides a solution to this problem.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-finstrut-doc)
#, fuzzy
-msgid "Documentation for texlive-lua2dox"
+msgid "Documentation for texlive-finstrut"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luabibentry:texlive-luabibentry-doc)
+#. description(texlive-specs-i:texlive-finstrut-doc)
#, fuzzy
-msgid "Documentation for texlive-luabibentry"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-finstrut"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luabidi:texlive-luabidi-doc)
-#, fuzzy
-msgid "Documentation for texlive-luabidi"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fira)
+msgid "Fira fonts with LaTeX support"
+msgstr ""
-#. summary(texlive-luacode:texlive-luacode-doc)
+#. description(texlive-specs-i:texlive-fira)
+msgid ""
+"This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Fira Sans family of fonts (version 2.001), designed by Erik Spiekermann and Ralph du Carrois of Carrois Type Design. Fira Sans is available in four weights with corresponding italics: light, regular, medium, and bold.\n"
+"\n"
+"date: 2014-04-26 18:03:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fira-doc)
#, fuzzy
-msgid "Documentation for texlive-luacode"
+msgid "Documentation for texlive-fira"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luaindex:texlive-luaindex-doc)
+#. description(texlive-specs-i:texlive-fira-doc)
#, fuzzy
-msgid "Documentation for texlive-luaindex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fira"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luainputenc:texlive-luainputenc-doc)
+#. summary(texlive-specs-i:texlive-fira-fonts)
#, fuzzy
-msgid "Documentation for texlive-luainputenc"
-msgstr "Dokumentace pro adaptx"
+msgid "Severed fonts for texlive-fira"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-lualatex-math:texlive-lualatex-math-doc)
+#. description(texlive-specs-i:texlive-fira-fonts)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-lualatex-math"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-fira"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-lualibs:texlive-lualibs-doc)
+#. summary(texlive-specs-i:texlive-first-latex-doc)
+msgid "A document for absolute LaTeX beginners"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-first-latex-doc)
+msgid ""
+"The document leads a reader, who knows nothing about LaTeX, through the production of a two page document. The user who has completed that first document, and wants to carry on, will find recommendations for tutorials.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fix2col)
+msgid "Fix miscellaneous two column mode features"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fix2col)
+msgid ""
+"Fix mark handling so that \\firstmark is taken from the first column if that column has any marks at all; keep two column floats like figure* in sequence with single column floats like figure.\n"
+"\n"
+"date: 2012-03-12 19:11:22 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fix2col-doc)
#, fuzzy
-msgid "Documentation for texlive-lualibs"
+msgid "Documentation for texlive-fix2col"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luamplib:texlive-luamplib-doc)
+#. description(texlive-specs-i:texlive-fix2col-doc)
#, fuzzy
-msgid "Documentation for texlive-luamplib"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-fix2col"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luaotfload:texlive-luaotfload-doc)
+#. summary(texlive-specs-i:texlive-fixfoot)
+msgid "Multiple use of the same footnote text"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fixfoot)
+msgid ""
+"Provides a \\DeclareFixedFootnote command to provide a single command for a frequently-used footnote. The package ensures that only one instance of the footnote text appears on each page (LaTeX needs to be run several times to achieve this).\n"
+"\n"
+"date: 2011-11-05 19:23:42 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fixfoot-doc)
#, fuzzy
-msgid "Documentation for texlive-luaotfload"
+msgid "Documentation for texlive-fixfoot"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luasseq:texlive-luasseq-doc)
+#. description(texlive-specs-i:texlive-fixfoot-doc)
#, fuzzy
-msgid "Documentation for texlive-luasseq"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fixfoot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luatex:texlive-luatex-doc)
+#. summary(texlive-specs-i:texlive-fixlatvian)
#, fuzzy
-msgid "Documentation for texlive-luatex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "LaTeX for Korean Language Support with TeX or LaTeX"
+msgid "Improve Latvian language support in XeLaTeX"
+msgstr "LaTeX pro podporu korejštiny v TeXu či LaTeXu"
-#. summary(texlive-luatexbase:texlive-luatexbase-doc)
+#. description(texlive-specs-i:texlive-fixlatvian)
+msgid ""
+"The package offers improvement of the Latvian language support in polyglossia, in particular in the area of the standard classes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fixlatvian-doc)
#, fuzzy
-msgid "Documentation for texlive-luatexbase"
+msgid "Documentation for texlive-fixlatvian"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luatexja:texlive-luatexja-doc)
+#. description(texlive-specs-i:texlive-fixlatvian-doc)
#, fuzzy
-msgid "Documentation for texlive-luatexja"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fixlatvian"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luatexko:texlive-luatexko-doc)
+#. summary(texlive-specs-i:texlive-fixltxhyph)
+msgid "Allow hyphenation of partially-emphasised substrings"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fixltxhyph)
+msgid ""
+"The package fixes the problem of TeX failing to hyphenate letter strings that seem (to TeX) to be words, but which are followed by an apostrophe and then an emphasis command. The cause of the problem is not the apostrophe, but the font change in the middle of the string. The problem arises in Catalan, French, Italian and Romansh.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fixltxhyph-doc)
#, fuzzy
-msgid "Documentation for texlive-luatexko"
+msgid "Documentation for texlive-fixltxhyph"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luatextra:texlive-luatextra-doc)
+#. description(texlive-specs-i:texlive-fixltxhyph-doc)
#, fuzzy
-msgid "Documentation for texlive-luatextra"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fixltxhyph"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luaxml:texlive-luaxml-doc)
+#. summary(texlive-specs-i:texlive-fixme)
+msgid "Insert \"fixme\" notes into draft documents"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fixme)
+msgid ""
+"This package provides a way to insert fixme notes in documents being developed (in draft mode). Such notes can appear in the margin of the document, as index entries, in the log file and as warnings on stdout. It is also possible to summarize them in a list. If your document is in a final version, any remaining fixme notes will produce an error. FiXme also comes with support for AUC-TeX.\n"
+"\n"
+"date: 2013-01-28 15:52:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fixme-doc)
#, fuzzy
-msgid "Documentation for texlive-luaxml"
+msgid "Documentation for texlive-fixme"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lxfonts:texlive-lxfonts-doc)
+#. description(texlive-specs-i:texlive-fixme-doc)
#, fuzzy
-msgid "Documentation for texlive-lxfonts"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fixme"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ly1:texlive-ly1-doc)
+#. summary(texlive-specs-i:texlive-fixmetodonotes)
+msgid "Add notes on document development"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fixmetodonotes)
+msgid ""
+"The package provides tools to highlight FIXME and TODO annotations. The command \\listofnotes prints a list of outstanding notes, with links to the pages on which they appear.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fixmetodonotes-doc)
#, fuzzy
-msgid "Documentation for texlive-ly1"
+msgid "Documentation for texlive-fixmetodonotes"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-m-tx:texlive-m-tx-doc)
+#. description(texlive-specs-i:texlive-fixmetodonotes-doc)
#, fuzzy
-msgid "Documentation for texlive-m-tx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fixmetodonotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mafr:texlive-mafr-doc)
+#. summary(texlive-specs-i:texlive-fixpdfmag)
+msgid "Fix magnification in PDFTeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fixpdfmag)
+msgid ""
+"A recent change to PDFTeX has caused magnification to apply to page dimensions. This small package changes the values set in the page dimension variables from pt to truept, thus evading the effects of \\mag.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fjodor)
#, fuzzy
-msgid "Documentation for texlive-mafr"
-msgstr "Dokumentace pro adaptx"
+#| msgid "A collection of basic system utilities"
+msgid "A selection of layout styles"
+msgstr "Kolekce základních systémových nástrojů"
-#. summary(texlive-magaz:texlive-magaz-doc)
+#. description(texlive-specs-i:texlive-fjodor)
+msgid ""
+"The package provides several page layouts, selectable by package options.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fjodor-doc)
#, fuzzy
-msgid "Documentation for texlive-magaz"
+msgid "Documentation for texlive-fjodor"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mailing:texlive-mailing-doc)
+#. description(texlive-specs-i:texlive-fjodor-doc)
#, fuzzy
-#| msgid "Documentation for javamail."
-msgid "Documentation for texlive-mailing"
-msgstr "Dokumentace javamail."
+msgid "This package includes the documentation for texlive-fjodor"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mailmerge:texlive-mailmerge-doc)
-#, fuzzy
-#| msgid "Documentation for javamail."
-msgid "Documentation for texlive-mailmerge"
-msgstr "Dokumentace javamail."
+#. summary(texlive-specs-i:texlive-flabels)
+msgid "Labels for files and folders"
+msgstr ""
-#. summary(texlive-makebarcode:texlive-makebarcode-doc)
-#, fuzzy
-msgid "Documentation for texlive-makebarcode"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flabels)
+msgid ""
+"Macros for typesetting pretty labels (optionally colored) for the back of files or binders (currently only the special A4 \"Leitz-Ordner\" ring binder is supported).\n"
+"\n"
+"date: 2011-12-16 15:22:52 +0000"
+msgstr ""
-#. summary(texlive-makebox:texlive-makebox-doc)
+#. summary(texlive-specs-i:texlive-flabels-doc)
#, fuzzy
-msgid "Documentation for texlive-makebox"
+msgid "Documentation for texlive-flabels"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-makecell:texlive-makecell-doc)
+#. description(texlive-specs-i:texlive-flabels-doc)
#, fuzzy
-msgid "Documentation for texlive-makecell"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flabels"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-makecirc:texlive-makecirc-doc)
+#. summary(texlive-specs-i:texlive-flacards)
+msgid "Generate flashcards for printing"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-flacards)
+msgid ""
+"The flacards class provides an easy interface to produce flashcards. It will print several cards per page, on both sides of the paper.\n"
+"\n"
+"date: 2012-07-03 22:51:36 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-flacards-doc)
#, fuzzy
-msgid "Documentation for texlive-makecirc"
+msgid "Documentation for texlive-flacards"
msgstr "Dokumentace pro castor"
-#. summary(texlive-makecmds:texlive-makecmds-doc)
+#. description(texlive-specs-i:texlive-flacards-doc)
#, fuzzy
-msgid "Documentation for texlive-makecmds"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flacards"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-makedtx:texlive-makedtx-doc)
-#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-makedtx"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-flagderiv)
+msgid "Flag style derivation package"
+msgstr ""
-#. summary(texlive-makeglos:texlive-makeglos-doc)
-#, fuzzy
-msgid "Documentation for texlive-makeglos"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flagderiv)
+msgid ""
+"The flagderiv package is used to create mathematical derivations using the flag/flagpole notation. The package features an intuitive command syntax, opening and closing multiple flagpoles, different comment styles, customizable symbols and label namespaces.\n"
+"\n"
+"date: 2013-11-21 20:20:37 +0000"
+msgstr ""
-#. summary(texlive-makeindex:texlive-makeindex-doc)
+#. summary(texlive-specs-i:texlive-flagderiv-doc)
#, fuzzy
-msgid "Documentation for texlive-makeindex"
+msgid "Documentation for texlive-flagderiv"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-makeplot:texlive-makeplot-doc)
+#. description(texlive-specs-i:texlive-flagderiv-doc)
#, fuzzy
-msgid "Documentation for texlive-makeplot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flagderiv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-makeshape:texlive-makeshape-doc)
-#, fuzzy
-msgid "Documentation for texlive-makeshape"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-flashcards)
+msgid "A class for typesetting flashcards"
+msgstr ""
-#. summary(texlive-mandi:texlive-mandi-doc)
-#, fuzzy
-msgid "Documentation for texlive-mandi"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flashcards)
+msgid ""
+"The FlashCards class provides for the typesetting of flash cards. By flash card, we mean a two sided card which has a prompt or a question on one side and the response or the answer on the flip (back) side. Flash cards come in many sizes depending on the nature of the information they contain.\n"
+"\n"
+"date: 2012-07-11 21:21:34 +0000"
+msgstr ""
-#. summary(texlive-manuscript:texlive-manuscript-doc)
+#. summary(texlive-specs-i:texlive-flashcards-doc)
#, fuzzy
-msgid "Documentation for texlive-manuscript"
+msgid "Documentation for texlive-flashcards"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-margbib:texlive-margbib-doc)
+#. description(texlive-specs-i:texlive-flashcards-doc)
#, fuzzy
-msgid "Documentation for texlive-margbib"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flashcards"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-marginfix:texlive-marginfix-doc)
-#, fuzzy
-msgid "Documentation for texlive-marginfix"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-flashmovie)
+msgid "Directly embed flash movies into PDF files"
+msgstr ""
-#. summary(texlive-marginnote:texlive-marginnote-doc)
-#, fuzzy
-msgid "Documentation for texlive-marginnote"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flashmovie)
+msgid ""
+"The package allows direct embedding of flash movies into PDF files. It is designed for use with pdflatex. The package takes advantage of the embedded Adobe Flash player in Adobe Reader 9; the reader is invoked with the 'rich media annotation' feature, described in \"Adobe Supplement to the ISO 32000 BaseVersion: 1.7 ExtensionLevel: 3\". This method of embedding movies is attractive since it removes all platform dependencies; however, the user is required to use Acrobat 9.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-marvosym:texlive-marvosym-doc)
+#. summary(texlive-specs-i:texlive-flashmovie-doc)
#, fuzzy
-msgid "Documentation for texlive-marvosym"
+msgid "Documentation for texlive-flashmovie"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-matc3:texlive-matc3-doc)
+#. description(texlive-specs-i:texlive-flashmovie-doc)
#, fuzzy
-msgid "Documentation for texlive-matc3"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flashmovie"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-matc3mem:texlive-matc3mem-doc)
-#, fuzzy
-msgid "Documentation for texlive-matc3mem"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-flipbook)
+msgid "Typeset flipbook animations, in the corners of documents"
+msgstr ""
-#. summary(texlive-match_parens:texlive-match_parens-doc)
-#, fuzzy
-msgid "Documentation for texlive-match_parens"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flipbook)
+msgid ""
+"The package provides techniques for adding flip book animations in the corner of your LaTeX documents (using images or ASCII art). Animations are defined as a set of numbered files (e.g., \"im1.pdf\", \"im2.pdf\", \"im3.pdf\", ...). The package relies on fancyhdr to control the corners.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-mathabx:texlive-mathabx-doc)
+#. summary(texlive-specs-i:texlive-flipbook-doc)
#, fuzzy
-msgid "Documentation for texlive-mathabx"
+msgid "Documentation for texlive-flipbook"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mathabx-type1:texlive-mathabx-type1-doc)
+#. description(texlive-specs-i:texlive-flipbook-doc)
#, fuzzy
-msgid "Documentation for texlive-mathabx-type1"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flipbook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mathalfa:texlive-mathalfa-doc)
-#, fuzzy
-msgid "Documentation for texlive-mathalfa"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-flippdf)
+msgid "Horizontal flipping of pages with pdfLaTeX"
+msgstr ""
-#. summary(texlive-mathastext:texlive-mathastext-doc)
-#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-mathastext"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flippdf)
+msgid ""
+"The package allows the production of a document with pages \"mirrored\". This is sometimes required by publishers who want camera-ready documents to be printed on transparent film (to be viewed from the \"wrong\" side). The package requires everypage, and only works with pdfLaTeX in PDF mode.\n"
+"\n"
+"date: 2012-07-12 13:21:21 +0000"
+msgstr ""
-#. summary(texlive-mathcomp:texlive-mathcomp-doc)
+#. summary(texlive-specs-i:texlive-flippdf-doc)
#, fuzzy
-msgid "Documentation for texlive-mathcomp"
+msgid "Documentation for texlive-flippdf"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mathdesign:texlive-mathdesign-doc)
+#. description(texlive-specs-i:texlive-flippdf-doc)
#, fuzzy
-msgid "Documentation for texlive-mathdesign"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flippdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mathdots:texlive-mathdots-doc)
+#. summary(texlive-specs-i:texlive-float)
#, fuzzy
-msgid "Documentation for texlive-mathdots"
-msgstr "Dokumentace pro adaptx"
+#| msgid "A Perl interface for URI objects."
+msgid "Improved interface for floating objects"
+msgstr "Perlovské rozhraní pro URI objekty"
-#. summary(texlive-mathexam:texlive-mathexam-doc)
-#, fuzzy
-msgid "Documentation for texlive-mathexam"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-float)
+msgid ""
+"Improves the interface for defining floating objects such as figures and tables. Introduces the boxed float, the ruled float and the plaintop float. You can define your own floats and improve the behaviour of the old ones. The package also provides the H float modifier option of the obsolete here package. You can select this as automatic default with \\floatplacement{figure}{H}.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-mathpazo:texlive-mathpazo-doc)
+#. summary(texlive-specs-i:texlive-float-doc)
#, fuzzy
-msgid "Documentation for texlive-mathpazo"
+msgid "Documentation for texlive-float"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mathspec:texlive-mathspec-doc)
+#. description(texlive-specs-i:texlive-float-doc)
#, fuzzy
-msgid "Documentation for texlive-mathspec"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-float"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mathspic:texlive-mathspic-doc)
-#, fuzzy
-msgid "Documentation for texlive-mathspic"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-floatrow)
+msgid "Modifying the layout of floats"
+msgstr ""
-#. summary(texlive-mattens:texlive-mattens-doc)
-#, fuzzy
-msgid "Documentation for texlive-mattens"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-floatrow)
+msgid ""
+"The floatrow package provides many ways to customize layouts of floating environments and has code to cooperate with the caption 3.x package. The package offers mechanisms to put floats side by side, and to put the caption beside its float. The floatrow settings could be expanded to the floats created by packages rotating, wrapfig, subfig (in the case of rows of subfloats), and longtable.\n"
+"\n"
+"date: 2012-07-12 11:41:30 +0000"
+msgstr ""
-#. summary(texlive-maybemath:texlive-maybemath-doc)
+#. summary(texlive-specs-i:texlive-floatrow-doc)
#, fuzzy
-msgid "Documentation for texlive-maybemath"
+msgid "Documentation for texlive-floatrow"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mbenotes:texlive-mbenotes-doc)
+#. description(texlive-specs-i:texlive-floatrow-doc)
#, fuzzy
-msgid "Documentation for texlive-mbenotes"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-floatrow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mcaption:texlive-mcaption-doc)
-#, fuzzy
-msgid "Documentation for texlive-mcaption"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-i:texlive-flowchart)
+msgid "Shapes for drawing flowcharts, using TikZ"
+msgstr ""
-#. summary(texlive-mceinleger:texlive-mceinleger-doc)
+#. description(texlive-specs-i:texlive-flowchart)
+msgid ""
+"The package provides a set of 'traditional' flowchart element shapes; the documentation shows how to build a flowchart from these elements, using pgf/TikZ. The package also requires the makeshape package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-flowchart-doc)
#, fuzzy
-msgid "Documentation for texlive-mceinleger"
+msgid "Documentation for texlive-flowchart"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mcite:texlive-mcite-doc)
+#. description(texlive-specs-i:texlive-flowchart-doc)
#, fuzzy
-msgid "Documentation for texlive-mcite"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-flowchart"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mciteplus:texlive-mciteplus-doc)
-#, fuzzy
-msgid "Documentation for texlive-mciteplus"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-i:texlive-flowfram)
+msgid "Create text frames for posters, brochures or magazines"
+msgstr ""
-#. summary(texlive-mdframed:texlive-mdframed-doc)
-#, fuzzy
-msgid "Documentation for texlive-mdframed"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-flowfram)
+msgid ""
+"The flowfram package enables you to create frames in a document such that the contents of the document environment flow from one frame to the next in the order in which they were defined. This is useful for creating posters or magazines, indeed any form of document that does not conform to the standard one or two column layout.\n"
+"\n"
+"date: 2014-05-15 15:30:42 +0000"
+msgstr ""
-#. summary(texlive-mdputu:texlive-mdputu-doc)
+#. summary(texlive-specs-i:texlive-flowfram-doc)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-mdputu"
+msgid "Documentation for texlive-flowfram"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mdsymbol:texlive-mdsymbol-doc)
+#. description(texlive-specs-i:texlive-flowfram-doc)
#, fuzzy
-msgid "Documentation for texlive-mdsymbol"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-flowfram"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mdwtools:texlive-mdwtools-doc)
-#, fuzzy
-msgid "Documentation for texlive-mdwtools"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fltpoint)
+msgid "Simple floating point arithmetic"
+msgstr ""
-#. summary(texlive-media9:texlive-media9-doc)
-#, fuzzy
-msgid "Documentation for texlive-media9"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-fltpoint)
+msgid ""
+"The package provides simple floating point operations (addition, subtraction, multiplication, division and rounding). Used, for example, by rccol.\n"
+"\n"
+"date: 2013-09-30 09:48:44 +0000"
+msgstr ""
-#. summary(texlive-meetingmins:texlive-meetingmins-doc)
+#. summary(texlive-specs-i:texlive-fltpoint-doc)
#, fuzzy
-msgid "Documentation for texlive-meetingmins"
+msgid "Documentation for texlive-fltpoint"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-memexsupp:texlive-memexsupp-doc)
+#. description(texlive-specs-i:texlive-fltpoint-doc)
#, fuzzy
-msgid "Documentation for texlive-memexsupp"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fltpoint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-memoir:texlive-memoir-doc)
-#, fuzzy
-msgid "Documentation for texlive-memoir"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fmp)
+msgid "Include Functional MetaPost in LaTeX"
+msgstr ""
-#. summary(texlive-memory:texlive-memory-doc)
-#, fuzzy
-msgid "Documentation for texlive-memory"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-fmp)
+msgid ""
+"The fmp package\n"
+"\n"
+"date: 2012-04-06 13:13:57 +0000"
+msgstr ""
-#. summary(texlive-mentis:texlive-mentis-doc)
+#. summary(texlive-specs-i:texlive-fmp-doc)
#, fuzzy
-msgid "Documentation for texlive-mentis"
+msgid "Documentation for texlive-fmp"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-menu:texlive-menu-doc)
+#. description(texlive-specs-i:texlive-fmp-doc)
#, fuzzy
-msgid "Documentation for texlive-menu"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fmp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-menukeys:texlive-menukeys-doc)
+#. summary(texlive-specs-i:texlive-fmtcount)
+msgid "Display the value of a LaTeX counter in a variety of formats"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fmtcount)
+msgid ""
+"The package provides commands that display the value of a LaTeX counter in a variety of formats (ordinal, text, hexadecimal, decimal, octal, binary etc). The package offers some multilingual support; configurations for use in English (both British and American usage), French (including Belgian and Swiss variants), German, Italian, Portuguese and Spanish documents are provided. This package was originally provided as part of the author's datetime package, but is now distributed separately.\n"
+"\n"
+"date: 2014-04-27 11:31:37 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fmtcount-doc)
#, fuzzy
-msgid "Documentation for texlive-menukeys"
+msgid "Documentation for texlive-fmtcount"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-metafont:texlive-metafont-doc)
+#. description(texlive-specs-i:texlive-fmtcount-doc)
#, fuzzy
-msgid "Documentation for texlive-metafont"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fmtcount"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-metago:texlive-metago-doc)
+#. summary(texlive-specs-i:texlive-fn2end)
+msgid "Convert footnotes to endnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fn2end)
+msgid ""
+"Defines macros \\makeendnotes, which converts \\footnote to produce endnotes; and \\theendnotes which prints them out.\n"
+"\n"
+"date: 2012-06-14 15:25:45 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fn2end-doc)
#, fuzzy
-msgid "Documentation for texlive-metago"
+msgid "Documentation for texlive-fn2end"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-metalogo:texlive-metalogo-doc)
+#. description(texlive-specs-i:texlive-fn2end-doc)
#, fuzzy
-msgid "Documentation for texlive-metalogo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fn2end"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-metaobj:texlive-metaobj-doc)
+#. summary(texlive-specs-i:texlive-fnbreak)
+msgid "Warn for split footnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fnbreak)
+msgid ""
+"This package detects footnotes that are split over several pages, and writes a warning to the log file.\n"
+"\n"
+"date: 2012-04-06 13:13:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fnbreak-doc)
#, fuzzy
-msgid "Documentation for texlive-metaobj"
+msgid "Documentation for texlive-fnbreak"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-metaplot:texlive-metaplot-doc)
+#. description(texlive-specs-i:texlive-fnbreak-doc)
#, fuzzy
-msgid "Documentation for texlive-metaplot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fnbreak"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-metapost:texlive-metapost-doc)
+#. summary(texlive-specs-i:texlive-fncychap)
+msgid "Seven predefined chapter heading styles"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fncychap)
+msgid ""
+"Each style can be modified using a set of simple commands. Optionally one can modify the formatting routines in order to create additional chapter headings. This package was previously known as FancyChapter.\n"
+"\n"
+"date: 2012-04-06 13:13:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fncychap-doc)
#, fuzzy
-msgid "Documentation for texlive-metapost"
+msgid "Documentation for texlive-fncychap"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-metatex:texlive-metatex-doc)
+#. description(texlive-specs-i:texlive-fncychap-doc)
#, fuzzy
-msgid "Documentation for texlive-metatex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fncychap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-metauml:texlive-metauml-doc)
+#. summary(texlive-specs-i:texlive-fncylab)
+msgid "Alter the format of \\label references"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fncylab)
+msgid ""
+"LaTeX provides a mechanism for altering the appearance of references to labels, but it's somewhat flawed, and requires that the user manipulate internal commands. The package solves the problem, by providing a \\labelformat command for changing the format of references to labels. The package also provides a \\Ref command to make reference to such redefined labels at the start of a sentence.\n"
+"\n"
+"date: 2012-04-06 13:13:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fncylab-doc)
#, fuzzy
-msgid "Documentation for texlive-metauml"
+msgid "Documentation for texlive-fncylab"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-method:texlive-method-doc)
+#. description(texlive-specs-i:texlive-fncylab-doc)
#, fuzzy
-msgid "Documentation for texlive-method"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fncylab"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-metre:texlive-metre-doc)
+#. summary(texlive-specs-i:texlive-fnpara)
+msgid "Footnotes in paragraphs"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fnpara)
+msgid ""
+"Typeset footnotes in run-on paragraphs, instead of one above another; this is a re-seating, for the LaTeX environment, of an example in the TeXbook. The same basic code, improved for use in e-TeX-based LaTeX, appears in the comprehensive footnote package footmisc, and superior versions are also available in the manyfoot and bigfoot packages.\n"
+"\n"
+"date: 2012-03-11 00:08:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fnpara-doc)
#, fuzzy
-msgid "Documentation for texlive-metre"
+msgid "Documentation for texlive-fnpara"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mex:texlive-mex-doc)
+#. description(texlive-specs-i:texlive-fnpara-doc)
#, fuzzy
-msgid "Documentation for texlive-mex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fnpara"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mf2pt1:texlive-mf2pt1-doc)
+#. summary(texlive-specs-i:texlive-fnpct)
+msgid "Manage footnote marks' interaction with punctuation"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fnpct)
+msgid ""
+"The package moves footnote marks after following punctuation (comma or full stop), and adjusts kerning as appropriate. As a side effect, a change to the handling of multiple footnotes is provided.\n"
+"\n"
+"date: 2014-03-10 12:15:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fnpct-doc)
#, fuzzy
-msgid "Documentation for texlive-mf2pt1"
+msgid "Documentation for texlive-fnpct"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mflogo:texlive-mflogo-doc)
+#. description(texlive-specs-i:texlive-fnpct-doc)
#, fuzzy
-msgid "Documentation for texlive-mflogo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fnpct"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mfnfss:texlive-mfnfss-doc)
+#. summary(texlive-specs-i:texlive-fntproof)
+msgid "A programmable font test pattern generator"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fntproof)
+msgid ""
+"The package implements all the font testing commands of Knuth's testfont.tex, but arranges that information necessary for each command is supplied as arguments to that command, rather than prompted for. This makes it possible to type all the tests in one command line, and easy to input the package in a file and to use the commands there. A few additional commands supporting this last purpose are also made available.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fntproof-doc)
#, fuzzy
-msgid "Documentation for texlive-mfnfss"
+msgid "Documentation for texlive-fntproof"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mfpic:texlive-mfpic-doc)
+#. description(texlive-specs-i:texlive-fntproof-doc)
#, fuzzy
-msgid "Documentation for texlive-mfpic"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fntproof"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mfpic4ode:texlive-mfpic4ode-doc)
+#. summary(texlive-specs-i:texlive-fnumprint)
+msgid "Print a number in 'appropriate' format"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fnumprint)
+msgid ""
+"The package defines two macros which decide to typeset a number either as an Arabic number or as a word (or words) for the number. If the number is between zero and twelve (including zero and twelve) then words will be used; if the number is outside that range, it will be typeset using the package numprint Words for English representation of numbers are generated within the package, while those for German are generated using the package zahl2string.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fnumprint-doc)
#, fuzzy
-msgid "Documentation for texlive-mfpic4ode"
+msgid "Documentation for texlive-fnumprint"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mftinc:texlive-mftinc-doc)
+#. description(texlive-specs-i:texlive-fnumprint-doc)
#, fuzzy
-msgid "Documentation for texlive-mftinc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fnumprint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mfware:texlive-mfware-doc)
+#. summary(texlive-specs-i:texlive-foekfont)
+msgid "The title font of the Mads Fok magazine"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-foekfont)
+msgid ""
+"The bundle provides an Adobe Type 1 font, and LaTeX support for its use. The magazine web site shows the font in use in a few places.\n"
+"\n"
+"date: 2014-04-26 18:03:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-foekfont-doc)
#, fuzzy
-msgid "Documentation for texlive-mfware"
+msgid "Documentation for texlive-foekfont"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mh:texlive-mh-doc)
+#. description(texlive-specs-i:texlive-foekfont-doc)
#, fuzzy
-msgid "Documentation for texlive-mh"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-foekfont"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mhchem:texlive-mhchem-doc)
+#. summary(texlive-specs-i:texlive-foekfont-fonts)
+msgid "Severed fonts for texlive-foekfont"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-foekfont-fonts)
+msgid "The separated fonts package for texlive-foekfont"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-foilhtml)
+msgid "Interface between foiltex and LaTeX2HTML"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-foilhtml)
+msgid ""
+"Provides integration between FoilTeX and LaTeX2HTML, adding sectioning commands and elements of logical formatting to FoilTeX and providing support for FoilTeX commands in LaTeX2HTML.\n"
+"\n"
+"date: 2012-02-22 23:03:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-foilhtml-doc)
#, fuzzy
-msgid "Documentation for texlive-mhchem"
+msgid "Documentation for texlive-foilhtml"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mhequ:texlive-mhequ-doc)
+#. description(texlive-specs-i:texlive-foilhtml-doc)
#, fuzzy
-msgid "Documentation for texlive-mhequ"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-foilhtml"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-microtype:texlive-microtype-doc)
+#. summary(texlive-specs-i:texlive-fonetika)
+msgid "Support for the Danish \"Dania\" phonetic system"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fonetika)
+msgid ""
+"Fonetika Dania is a font bundle with a serif font and a sans serif font for the danish phonetic system Dania. Both fonts exist in regular and bold weights. LaTeX support is provided. The fonts are based on URW Palladio and Iwona Condensed, and were created using FontForge.\n"
+"\n"
+"date: 2014-04-26 18:03:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fonetika-doc)
#, fuzzy
-msgid "Documentation for texlive-microtype"
+msgid "Documentation for texlive-fonetika"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-midnight:texlive-midnight-doc)
+#. description(texlive-specs-i:texlive-fonetika-doc)
#, fuzzy
-msgid "Documentation for texlive-midnight"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-fonetika"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-midpage:texlive-midpage-doc)
-#, fuzzy
-msgid "Documentation for texlive-midpage"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fonetika-fonts)
+msgid "Severed fonts for texlive-fonetika"
+msgstr ""
-#. summary(texlive-miller:texlive-miller-doc)
+#. description(texlive-specs-i:texlive-fonetika-fonts)
+msgid "The separated fonts package for texlive-fonetika"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-font-change)
+msgid "Macros to change text and mathematics fonts in plain TeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-font-change)
+msgid ""
+"Macros to Change Text and Mathematics fonts in TeX: 45 Beautiful Variants The macros are written for plain TeX and may be used with other packages like AmSTeX, eplain, etc. They also work with XeTeX. The macros allow users to change the fonts (for both text and mathematics) in their TeX document with only one statement. The fonts may be used readily at various predefined sizes. All the fonts called by these macro files are free and are included in current MiKTeX and TeX Live distributions.\n"
+"\n"
+"date: 2012-07-06 20:53:14 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-font-change-doc)
#, fuzzy
-msgid "Documentation for texlive-miller"
+msgid "Documentation for texlive-font-change"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-minibox:texlive-minibox-doc)
+#. description(texlive-specs-i:texlive-font-change-doc)
#, fuzzy
-msgid "Documentation for texlive-minibox"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-font-change"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-minifp:texlive-minifp-doc)
+#. summary(texlive-specs-i:texlive-fontawesome)
+msgid "Font containing web-related icons"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fontawesome)
+msgid ""
+"The package offers access to the large number of web-related icons provided by the included font. The package requires the package, fontspec, running under XeTeX or LuaTeX.\n"
+"\n"
+"date: 2014-04-26 18:05:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontawesome-doc)
#, fuzzy
-msgid "Documentation for texlive-minifp"
+msgid "Documentation for texlive-fontawesome"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-minipage-marginpar:texlive-minipage-marginpar-doc)
+#. description(texlive-specs-i:texlive-fontawesome-doc)
#, fuzzy
-msgid "Documentation for texlive-minipage-marginpar"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-fontawesome"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-miniplot:texlive-miniplot-doc)
+#. summary(texlive-specs-i:texlive-fontawesome-fonts)
#, fuzzy
-msgid "Documentation for texlive-miniplot"
+msgid "Severed fonts for texlive-fontawesome"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-minitoc:texlive-minitoc-doc)
+#. description(texlive-specs-i:texlive-fontawesome-fonts)
#, fuzzy
-msgid "Documentation for texlive-minitoc"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Development package for libstroke"
+msgid "The separated fonts package for texlive-fontawesome"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-minted:texlive-minted-doc)
+#. summary(texlive-specs-i:texlive-fontaxes)
#, fuzzy
-msgid "Documentation for texlive-minted"
-msgstr "Dokumentace pro castor"
+#| msgid "Additional scripts for ant"
+msgid "Additional font axes for LaTeX"
+msgstr "Další skripty pro ant"
-#. summary(texlive-minutes:texlive-minutes-doc)
-#, fuzzy
-msgid "Documentation for texlive-minutes"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-i:texlive-fontaxes)
+msgid ""
+"The package adds several new font axes on top of LaTeX's New Font Selection Scheme. In particular, it splits the shape axis into a primary and a secondary shape axis, and it adds three new axes to deal with the different figure versions offered by many professional fonts.\n"
+"\n"
+"date: 2014-03-23 15:44:03 +0000"
+msgstr ""
-#. summary(texlive-mkgrkindex:texlive-mkgrkindex-doc)
+#. summary(texlive-specs-i:texlive-fontaxes-doc)
#, fuzzy
-msgid "Documentation for texlive-mkgrkindex"
+msgid "Documentation for texlive-fontaxes"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mkjobtexmf:texlive-mkjobtexmf-doc)
+#. description(texlive-specs-i:texlive-fontaxes-doc)
#, fuzzy
-msgid "Documentation for texlive-mkjobtexmf"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fontaxes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mkpattern:texlive-mkpattern-doc)
-#, fuzzy
-msgid "Documentation for texlive-mkpattern"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fontbook)
+msgid "Generate a font book"
+msgstr ""
-#. summary(texlive-mla-paper:texlive-mla-paper-doc)
+#. description(texlive-specs-i:texlive-fontbook)
+msgid ""
+"The package provides a means of producing a 'book' of font samples (for evaluation, etc.).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontbook-doc)
#, fuzzy
-msgid "Documentation for texlive-mla-paper"
+msgid "Documentation for texlive-fontbook"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mlist:texlive-mlist-doc)
+#. description(texlive-specs-i:texlive-fontbook-doc)
#, fuzzy
-msgid "Documentation for texlive-mlist"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-fontbook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mltex:texlive-mltex-doc)
-#, fuzzy
-msgid "Documentation for texlive-mltex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fontch)
+msgid "Changing fonts, sizes and encodings in Plain TeX"
+msgstr ""
-#. summary(texlive-mmap:texlive-mmap-doc)
+#. description(texlive-specs-i:texlive-fontch)
+msgid ""
+"The fontch macros allow the user to change font size and family anywhere in a plain TeX document. Sizes of 8, 10, 12, 14, 20 and 24 points are available. A sans serif family (\\sf) is defined in addition to the families already defined in plain TeX. Optional support for Latin Modern T1 and TS1 fonts is given. There are macros for non-latin1 letters and for most TS1 symbols. Math mode always uses CM fonts. A command for producing doubled-spaced documents is also provided. The present version of the package is designed to deal with the latest release of the Latin Modern fonts version 1.106. Unfortunately, it can no longer support earlier versions of the fonts, so an obsolete version of the package is retained for users who don't yet have access to the latest version of the fonts.\n"
+"\n"
+"date: 2012-07-06 20:53:14 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontch-doc)
#, fuzzy
-msgid "Documentation for texlive-mmap"
+msgid "Documentation for texlive-fontch"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mnotes:texlive-mnotes-doc)
+#. description(texlive-specs-i:texlive-fontch-doc)
#, fuzzy
-msgid "Documentation for texlive-mnotes"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fontch"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mnsymbol:texlive-mnsymbol-doc)
+#. summary(texlive-specs-i:texlive-fontinst)
+msgid "Help with installing fonts for TeX and LaTeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fontinst)
+msgid ""
+"TeX macros for converting Adobe Font Metric files to TeX metric and virtual font format. Fontinst helps mainly with the number crunching and shovelling parts of font installation. This means in practice that it creates a number of files which give the TeX metrics (and related information) for a font family that (La)TeX needs to do any typesetting in these fonts. Fontinst furthermore makes it easy to create fonts containing glyphs from more than one base font, taking advantage of (e.g.) \"expert\" font sets. Fontinst cannot examine files to see if they contain any useful information, nor automatically search for files or work with binary file formats; those tasks must normally be done manually or with the help of some other tool, such as the pltotf and vptovf programs.\n"
+"\n"
+"date: 2012-07-06 10:12:34 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontinst-doc)
#, fuzzy
-msgid "Documentation for texlive-mnsymbol"
+msgid "Documentation for texlive-fontinst"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-moderncv:texlive-moderncv-doc)
+#. description(texlive-specs-i:texlive-fontinst-doc)
#, fuzzy
-msgid "Documentation for texlive-moderncv"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fontinst"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-moderntimeline:texlive-moderntimeline-doc)
+#. summary(texlive-specs-i:texlive-fontname)
+msgid "Scheme for naming fonts in TeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fontname)
+msgid ""
+"The scheme for assigning names is described (in the documentation part of the package), and map files giving the relation between foundry name and 'TeX-name' are also provided.\n"
+"\n"
+"date: 2012-07-06 21:09:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontname-doc)
#, fuzzy
-msgid "Documentation for texlive-moderntimeline"
+msgid "Documentation for texlive-fontname"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-modiagram:texlive-modiagram-doc)
+#. description(texlive-specs-i:texlive-fontname-doc)
#, fuzzy
-#| msgid "Documentation for digiKam"
-msgid "Documentation for texlive-modiagram"
-msgstr "Dokumentace pro digiKam"
+msgid "This package includes the documentation for texlive-fontname"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-modref:texlive-modref-doc)
+#. summary(texlive-specs-i:texlive-fontools)
+msgid "Tools to simplify using fonts (especially TT/OTF ones)"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fontools)
+msgid ""
+"This package provides a few tools to ease using fonts (especially Truetype/Opentype ones) with Latex and fontinst: afm2afm - reencode .afm files; designed to replace fontinst's \\reencodefont for big .afm files; autoinst - simplify the use of the LCDF TypeTools by creating a command file for otftotfm, plus .fd and .sty files; and ot2kpx - extract all kerning pairs from an OpenType font.\n"
+"\n"
+"date: 2014-04-05 17:44:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontools-doc)
#, fuzzy
-msgid "Documentation for texlive-modref"
+msgid "Documentation for texlive-fontools"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-modroman:texlive-modroman-doc)
+#. description(texlive-specs-i:texlive-fontools-doc)
#, fuzzy
-msgid "Documentation for texlive-modroman"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fontools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mongolian-babel:texlive-mongolian-babel-doc)
+#. summary(texlive-specs-i:texlive-fonts-tlwg)
+msgid "Thai fonts for LaTeX from TLWG"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fonts-tlwg)
+msgid ""
+"A collection of free Thai fonts, supplied as FontForge sources, and with LaTeX .fd files. This package depends on the thailatex package.\n"
+"\n"
+"date: 2014-05-01 21:14:09 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fonts-tlwg-doc)
#, fuzzy
-msgid "Documentation for texlive-mongolian-babel"
+msgid "Documentation for texlive-fonts-tlwg"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-monofill:texlive-monofill-doc)
+#. description(texlive-specs-i:texlive-fonts-tlwg-doc)
#, fuzzy
-msgid "Documentation for texlive-monofill"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fonts-tlwg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-montex:texlive-montex-doc)
+#. summary(texlive-specs-i:texlive-fonts-tlwg-fonts)
+msgid "Severed fonts for texlive-fonts-tlwg"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fonts-tlwg-fonts)
+msgid "The separated fonts package for texlive-fonts-tlwg"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontspec)
+msgid "Advanced font selection in XeLaTeX and LuaLaTeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fontspec)
+msgid ""
+"Fontspec is a package for XeLaTeX and LuaLaTeX. It provides an automatic and unified interface to feature-rich AAT and OpenType fonts through the NFSS in LaTeX running on XeTeX or LuaTeX engines. The package requires the l3kernel and xparse bundles from the LaTeX 3 development team.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontspec-doc)
#, fuzzy
-msgid "Documentation for texlive-montex"
+msgid "Documentation for texlive-fontspec"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-moreenum:texlive-moreenum-doc)
+#. description(texlive-specs-i:texlive-fontspec-doc)
#, fuzzy
-msgid "Documentation for texlive-moreenum"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fontspec"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-morefloats:texlive-morefloats-doc)
+#. summary(texlive-specs-i:texlive-fonttable)
+msgid "Print font tables from a LaTeX document"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fonttable)
+msgid ""
+"This is a package version of nfssfont.tex (part of the LaTeX distribution); it enables you to print a table of the characters of a font and/or some text (for demonstration or testing purposes), from within a document. (Packages such as testfont and nfssfont.tex provide these facilities, but they run as interactive programs: the user is expected to type details of what is needed.) Note that the package mftinc also has a \\fonttable function; the documentation explains how avoid a clash with that package.\n"
+"\n"
+"date: 2012-07-06 21:09:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fonttable-doc)
#, fuzzy
-msgid "Documentation for texlive-morefloats"
+msgid "Documentation for texlive-fonttable"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-morehype:texlive-morehype-doc)
+#. description(texlive-specs-i:texlive-fonttable-doc)
#, fuzzy
-msgid "Documentation for texlive-morehype"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fonttable"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-moresize:texlive-moresize-doc)
+#. summary(texlive-specs-i:texlive-fontware)
+msgid "Package fontware"
+msgstr "Balíček fontware"
+
+#. description(texlive-specs-i:texlive-fontware)
+msgid "The fontware package"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontwrap)
+msgid "Bind fonts to specific unicode blocks"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fontwrap)
+msgid ""
+"The package (which runs under XeLaTeX) lets you bind fonts to specific unicode blocks, for automatic font tagging of multilingual text. The package uses Perl (via perltex) to construct its tables.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fontwrap-doc)
#, fuzzy
-msgid "Documentation for texlive-moresize"
+msgid "Documentation for texlive-fontwrap"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-moreverb:texlive-moreverb-doc)
+#. description(texlive-specs-i:texlive-fontwrap-doc)
#, fuzzy
-msgid "Documentation for texlive-moreverb"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fontwrap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-morewrites:texlive-morewrites-doc)
+#. summary(texlive-specs-i:texlive-footbib)
+msgid "Bibliographic references as footnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-footbib)
+msgid ""
+"The package makes bibliographic references appear as footnotes. It defines a command \\footcite which is similar to the LaTeX \\cite command but the references cited in this way appear at the bottom of the pages. This 'foot bibliography' does not conflict with the standard one and both may exist simultaneously in a document. The command \\cite may still be used to produce the standard bibliography. The foot bibliography uses its own style and bibliographic database which may be specified independently of the standard one. Any standard bibliography style may be used.\n"
+"\n"
+"date: 2012-06-18 16:51:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-footbib-doc)
#, fuzzy
-msgid "Documentation for texlive-morewrites"
+msgid "Documentation for texlive-footbib"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-movie15:texlive-movie15-doc)
+#. description(texlive-specs-i:texlive-footbib-doc)
#, fuzzy
-msgid "Documentation for texlive-movie15"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-footbib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mp3d:texlive-mp3d-doc)
+#. summary(texlive-specs-i:texlive-footmisc)
+msgid "A range of footnote options"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-footmisc)
+msgid ""
+"A collection of ways to change the typesetting of footnotes. The package provides means of changing the layout of the footnotes themselves (including setting them in 'paragraphs' -- the para option), a way to number footnotes per page (the perpage option), to make footnotes disappear in a 'moving' argument (stable option) and to deal with multiple references to footnotes from the same place (multiple option). The package also has a range of techniques for labelling footnotes with symbols rather than numbers. Some of the functions of the package are overlap with the functionality of other packages. The para option is also provided by the manyfoot and bigfoot packages, though those are both also portmanteau packages. (Don't be seduced by fnpara, whose implementation is improved by the present package.) The perpage option is also offered by footnpag and by the rather more general-purpose perpage\n"
+"\n"
+"date: 2014-02-27 12:35:44 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-footmisc-doc)
#, fuzzy
-msgid "Documentation for texlive-mp3d"
+msgid "Documentation for texlive-footmisc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mparhack:texlive-mparhack-doc)
+#. description(texlive-specs-i:texlive-footmisc-doc)
#, fuzzy
-msgid "Documentation for texlive-mparhack"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-footmisc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mpattern:texlive-mpattern-doc)
+#. summary(texlive-specs-i:texlive-footnotebackref)
+msgid "Back-references from footnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-footnotebackref)
+msgid ""
+"The package provides the means of creating hyperlinks, from a footnote at the bottom of the page, back to the occurence of the footnote in the main text.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-footnotebackref-doc)
#, fuzzy
-msgid "Documentation for texlive-mpattern"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-footnotebackref"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-mpcolornames:texlive-mpcolornames-doc)
+#. description(texlive-specs-i:texlive-footnotebackref-doc)
#, fuzzy
-msgid "Documentation for texlive-mpcolornames"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-footnotebackref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mpgraphics:texlive-mpgraphics-doc)
+#. summary(texlive-specs-i:texlive-footnoterange)
+msgid "References to ranges of footnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-footnoterange)
+msgid ""
+"The package provides environments footnoterange and footnoterange*. Multiple footnotes inside these environments are not referenced as (e.g.) \"1 2 3 4\" but as \"1-4\", i.e., the range (from first to last referred footnote at that place) is given. If hyperref package and use of its hyperfootnotes-option the references are hyperlinked. (References to footnotes in the footnoterange* environment are never hyperlinked.)\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-footnoterange-doc)
#, fuzzy
-msgid "Documentation for texlive-mpgraphics"
+msgid "Documentation for texlive-footnoterange"
msgstr "Dokumentace pro gawk"
-#. summary(texlive-mptopdf:texlive-mptopdf-doc)
+#. description(texlive-specs-i:texlive-footnoterange-doc)
#, fuzzy
-msgid "Documentation for texlive-mptopdf"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-footnoterange"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ms:texlive-ms-doc)
+#. summary(texlive-specs-i:texlive-footnpag)
+msgid "Per-page numbering of footnotes"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-footnpag)
+msgid ""
+"Allows footnotes on individual pages to be numbered from 1, rather than being numbered sequentially through the document.\n"
+"\n"
+"date: 2012-05-19 12:48:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-footnpag-doc)
#, fuzzy
-msgid "Documentation for texlive-ms"
+msgid "Documentation for texlive-footnpag"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-msc:texlive-msc-doc)
+#. description(texlive-specs-i:texlive-footnpag-doc)
#, fuzzy
-msgid "Documentation for texlive-msc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-footnpag"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-msg:texlive-msg-doc)
+#. summary(texlive-specs-i:texlive-forarray)
+msgid "Using array structures in LaTeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-forarray)
+msgid ""
+"The package provides functionality for processing lists and array structures in LaTeX. Arrays can contain characters as well as TeX and LaTeX commands, nesting of arrays is possible, and arrays are processed within the same brace level as their surrounding environment. Array levels can be delimited by characters or control sequences defined by the user. Practical uses of this package include data management, construction of lists and tables, and calculations based on the contents of lists and arrays.\n"
+"\n"
+"date: 2012-05-19 12:48:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-forarray-doc)
#, fuzzy
-msgid "Documentation for texlive-msg"
+msgid "Documentation for texlive-forarray"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mslapa:texlive-mslapa-doc)
+#. description(texlive-specs-i:texlive-forarray-doc)
#, fuzzy
-msgid "Documentation for texlive-mslapa"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-forarray"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-msu-thesis:texlive-msu-thesis-doc)
+#. summary(texlive-specs-i:texlive-foreign)
+msgid "Systematic treatment of 'foreign' words in documents"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-foreign)
+msgid ""
+"The package supports authors' use of consistent typesetting of foreign words in documents.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-foreign-doc)
#, fuzzy
-msgid "Documentation for texlive-msu-thesis"
+msgid "Documentation for texlive-foreign"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mtgreek:texlive-mtgreek-doc)
+#. description(texlive-specs-i:texlive-foreign-doc)
#, fuzzy
-msgid "Documentation for texlive-mtgreek"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-foreign"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-multenum:texlive-multenum-doc)
+#. summary(texlive-specs-i:texlive-forest)
+msgid "Drawing (linguistic) trees"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-forest)
+msgid ""
+"The package is provides a PGF/TikZ-based mechanism for drawing linguistic (and other kinds of) trees. Its main features are: a packing algorithm which can produce very compact trees; a user- friendly interface consisting of the familiar bracket encoding of trees plus the key-value interface to option-setting; many tree-formatting options, with control over option values of individual nodes and mechanisms for their manipulation; the possibility to decorate the tree using the full power of PGF/TikZ; and an externalization mechanism sensitive to code- changes.\n"
+"\n"
+"date: 2014-03-07 14:12:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-forest-doc)
#, fuzzy
-msgid "Documentation for texlive-multenum"
+msgid "Documentation for texlive-forest"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multibbl:texlive-multibbl-doc)
+#. description(texlive-specs-i:texlive-forest-doc)
#, fuzzy
-msgid "Documentation for texlive-multibbl"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "This package includes the documentation for texlive-forest"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-multibib:texlive-multibib-doc)
-#, fuzzy
-msgid "Documentation for texlive-multibib"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+#. summary(texlive-specs-i:texlive-forloop)
+msgid "Iteration in LaTeX"
+msgstr ""
-#. summary(texlive-multibibliography:texlive-multibibliography-doc)
-#, fuzzy
-msgid "Documentation for texlive-multibibliography"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+#. description(texlive-specs-i:texlive-forloop)
+msgid ""
+"The package provides a command \\forloop for doing iteration in LaTeX macro programming.\n"
+"\n"
+"date: 2012-05-19 12:48:02 +0000"
+msgstr ""
-#. summary(texlive-multicap:texlive-multicap-doc)
+#. summary(texlive-specs-i:texlive-forloop-doc)
#, fuzzy
-msgid "Documentation for texlive-multicap"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-
-#. summary(texlive-multido:texlive-multido-doc)
-#, fuzzy
-msgid "Documentation for texlive-multido"
+msgid "Documentation for texlive-forloop"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multienv:texlive-multienv-doc)
+#. description(texlive-specs-i:texlive-forloop-doc)
#, fuzzy
-msgid "Documentation for texlive-multienv"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-forloop"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-multiexpand:texlive-multiexpand-doc)
+#. summary(texlive-specs-i:texlive-formlett)
+msgid "Letters to multiple recipients"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-formlett)
+msgid ""
+"A package for multiple letters from the same basic source; the package offers parametrisation of the letters actually sent.\n"
+"\n"
+"date: 2011-09-13 13:32:00 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-formlett-doc)
#, fuzzy
-msgid "Documentation for texlive-multiexpand"
+msgid "Documentation for texlive-formlett"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multiobjective:texlive-multiobjective-doc)
+#. description(texlive-specs-i:texlive-formlett-doc)
#, fuzzy
-msgid "Documentation for texlive-multiobjective"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-formlett"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-multirow:texlive-multirow-doc)
+#. summary(texlive-specs-i:texlive-formular)
+msgid "Create forms containing field for manual entry"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-formular)
+msgid ""
+"When typesetting forms there often arises the need for defining fields which consist of one or more lines where the customer can write something down manually. This package offers some commands for defining such fields in a distinctive way.\n"
+"\n"
+"date: 2012-05-19 12:48:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-formular-doc)
#, fuzzy
-msgid "Documentation for texlive-multirow"
+msgid "Documentation for texlive-formular"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-munich:texlive-munich-doc)
+#. description(texlive-specs-i:texlive-formular-doc)
#, fuzzy
-msgid "Documentation for texlive-munich"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-formular"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-musixguit:texlive-musixguit-doc)
+#. summary(texlive-specs-i:texlive-fouridx)
+msgid "Left sub- and superscripts in maths mode"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fouridx)
+msgid ""
+"The package enables left subscripts and superscripts in maths mode. The sub- and superscripts are raised for optimum fitting to the symbol indexed, in such a way that left and right sub- and superscripts are set on the same level, as appropriate. The package provides an alternative to the use of the \\sideset command in the amsmath package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fouridx-doc)
#, fuzzy
-msgid "Documentation for texlive-musixguit"
+msgid "Documentation for texlive-fouridx"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-musixtex:texlive-musixtex-doc)
+#. description(texlive-specs-i:texlive-fouridx-doc)
#, fuzzy
-msgid "Documentation for texlive-musixtex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fouridx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-musixtex-fonts:texlive-musixtex-fonts-doc)
+#. summary(texlive-specs-i:texlive-fourier)
+msgid "Using Utopia fonts in LaTeX documents"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fourier)
+msgid ""
+"Fourier-GUTenberg is a LaTeX typesetting system which uses Adobe Utopia as its standard base font. Fourier-GUTenberg provides all complementary typefaces needed to allow Utopia based TeX typesetting, including an extensive mathematics set and several other symbols. The system is absolutely stand- alone: apart from Utopia and Fourier, no other typefaces are required. The fourier fonts will also work with Adobe Utopia Expert fonts, which are only available for purchase. Utopia is a registered trademark of Adobe Systems Incorporated\n"
+"\n"
+"date: 2014-05-01 21:14:09 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fourier-doc)
#, fuzzy
-msgid "Documentation for texlive-musixtex-fonts"
+msgid "Documentation for texlive-fourier"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-musuos:texlive-musuos-doc)
+#. description(texlive-specs-i:texlive-fourier-doc)
#, fuzzy
-msgid "Documentation for texlive-musuos"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fourier"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-muthesis:texlive-muthesis-doc)
+#. summary(texlive-specs-i:texlive-fourier-fonts)
+msgid "Severed fonts for texlive-fourier"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fourier-fonts)
+msgid "The separated fonts package for texlive-fourier"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fouriernc)
+msgid "Use New Century Schoolbook text with Fourier maths fonts"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fouriernc)
+msgid ""
+"This package provides a LaTeX mathematics font setup for use with New Century Schoolbook text. In order to use it you need to have the Fourier-GUTenberg fonts installed.\n"
+"\n"
+"date: 2014-05-01 21:14:09 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fouriernc-doc)
#, fuzzy
-msgid "Documentation for texlive-muthesis"
+msgid "Documentation for texlive-fouriernc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mversion:texlive-mversion-doc)
+#. description(texlive-specs-i:texlive-fouriernc-doc)
#, fuzzy
-msgid "Documentation for texlive-mversion"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fouriernc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mwcls:texlive-mwcls-doc)
+#. summary(texlive-specs-i:texlive-fp)
+msgid "Fixed point arithmetic"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fp)
+msgid ""
+"An extensive collection of arithmetic operations for fixed point real numbers of high precision.\n"
+"\n"
+"date: 2013-09-30 09:48:44 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fp-doc)
#, fuzzy
-msgid "Documentation for texlive-mwcls"
+msgid "Documentation for texlive-fp"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mwe:texlive-mwe-doc)
+#. description(texlive-specs-i:texlive-fp-doc)
#, fuzzy
-msgid "Documentation for texlive-mwe"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mxedruli:texlive-mxedruli-doc)
+#. summary(texlive-specs-i:texlive-fpl)
+msgid "SC and OsF fonts for URW Palladio L"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fpl)
+msgid ""
+"The FPL Fonts provide a set of SC/OsF fonts for URW Palladio L which are compatible with respect to metrics with the Palatino SC/OsF fonts from Adobe. Note that it is not my aim to exactly reproduce the outlines of the original Adobe fonts. The SC and OsF in the FPL Fonts were designed with the glyphs from URW Palladio L as starting point. For some glyphs (e.g. 'o') I got the best result by scaling and boldening. For others (e.g. 'h') shifting selected portions of the character gave more satisfying results. All this was done using the free font editor FontForge. The kerning data in these fonts comes from Walter Schmidt's improved Palatino metrics. LaTeX use is enabled by the mathpazo package, which is part of the psnfss distribution.\n"
+"\n"
+"date: 2014-05-01 21:14:09 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fpl-doc)
#, fuzzy
-msgid "Documentation for texlive-mxedruli"
+msgid "Documentation for texlive-fpl"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mychemistry:texlive-mychemistry-doc)
+#. description(texlive-specs-i:texlive-fpl-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-mychemistry"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-fpl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mycv:texlive-mycv-doc)
-#, fuzzy
-msgid "Documentation for texlive-mycv"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-fpl-fonts)
+msgid "Severed fonts for texlive-fpl"
+msgstr ""
-#. summary(texlive-mylatexformat:texlive-mylatexformat-doc)
+#. description(texlive-specs-i:texlive-fpl-fonts)
+msgid "The separated fonts package for texlive-fpl"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fragmaster)
+msgid "Using psfrag with PDFLaTeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fragmaster)
+msgid ""
+"Fragmaster enables you to use psfrag with PDFLaTeX. It takes EPS files and psfrag substitution definition files, and produces PDF and EPS files with the substitutions included.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fragmaster-doc)
#, fuzzy
#| msgid "Documentation for castor"
-msgid "Documentation for texlive-mylatexformat"
+msgid "Documentation for texlive-fragmaster"
msgstr "Dokumentace pro castor"
-#. summary(texlive-nag:texlive-nag-doc)
+#. description(texlive-specs-i:texlive-fragmaster-doc)
#, fuzzy
-msgid "Documentation for texlive-nag"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fragmaster"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nameauth:texlive-nameauth-doc)
+#. summary(texlive-specs-i:texlive-fragments)
+msgid "Fragments of LaTeX code"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-fragments)
+msgid ""
+"A collection of fragments of LaTeX code, suitable for inclusion in packages, or (possibly) in users' documents. Included are: checklab, for modifying the label checking code at \\end{document}; overrightarrow, defining a doubled over-arrow macro; removefr, for removing 'reset' relations between counters; and subscript, defining a \\textsubscript command.\n"
+"\n"
+"date: 2013-12-28 16:03:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-fragments-doc)
#, fuzzy
-msgid "Documentation for texlive-nameauth"
+msgid "Documentation for texlive-fragments"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-namespc:texlive-namespc-doc)
+#. description(texlive-specs-i:texlive-fragments-doc)
#, fuzzy
-msgid "Documentation for texlive-namespc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fragments"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nanumtype1:texlive-nanumtype1-doc)
+#. summary(texlive-specs-i:texlive-frame)
+msgid "Framed boxes for Plain TeX"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-frame)
+msgid ""
+"A jiffy file (taken from fancybox) for placing a frame around a box of text. The macros also provide for typesetting an empty box of given dimensions.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-frame-doc)
#, fuzzy
-msgid "Documentation for texlive-nanumtype1"
+msgid "Documentation for texlive-frame"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-natbib:texlive-natbib-doc)
+#. description(texlive-specs-i:texlive-frame-doc)
#, fuzzy
-msgid "Documentation for texlive-natbib"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frame"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nath:texlive-nath-doc)
+#. summary(texlive-specs-i:texlive-framed)
+msgid "Framed or shaded regions that can break across pages"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-framed)
+msgid ""
+"The package creates three environments: framed, which puts an ordinary frame box around the region, shaded, which shades the region, and leftbar, which places a line at the left side. The environments allow a break at their start (the \\FrameCommand enables creation of a title that is \"attached\" to the environment); breaks are also allowed in the course of the framed/shaded matter. There is also a command \\MakeFramed to make your own framed-style environments.\n"
+"\n"
+"date: 2013-12-28 16:03:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-framed-doc)
#, fuzzy
-msgid "Documentation for texlive-nath"
+msgid "Documentation for texlive-framed"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nature:texlive-nature-doc)
+#. description(texlive-specs-i:texlive-framed-doc)
#, fuzzy
-msgid "Documentation for texlive-nature"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-framed"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-navigator:texlive-navigator-doc)
+#. summary(texlive-specs-i:texlive-francais-bst)
+msgid "Bibliographies conforming to French typographic standards"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-francais-bst)
+msgid ""
+"The package provides bibliographies (in French) conforming to the rules in \"Guide de la communication ecrite\" (Malo, M., Quebec Amerique, 1996. ISBN 978-2-8903-7875-9) The BibTeX styles were generated using custom-bib and they are compatible with natbib\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-francais-bst-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-navigator"
+msgid "Documentation for texlive-francais-bst"
msgstr "Dokumentace pro castor"
-#. summary(texlive-ncclatex:texlive-ncclatex-doc)
+#. description(texlive-specs-i:texlive-francais-bst-doc)
#, fuzzy
-msgid "Documentation for texlive-ncclatex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-francais-bst"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ncctools:texlive-ncctools-doc)
+#. summary(texlive-specs-i:texlive-frankenstein)
#, fuzzy
-msgid "Documentation for texlive-ncctools"
-msgstr "Dokumentace pro adaptx"
+msgid "A collection of LaTeX packages"
+msgstr "Kolekce užitečných knihoven pro hry"
-#. summary(texlive-nddiss:texlive-nddiss-doc)
-#, fuzzy
-msgid "Documentation for texlive-nddiss"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-frankenstein)
+msgid ""
+"Frankenstein is a bundle of LaTeX packages serving various purposes and a BibTeX bibliography style. Descriptions are given under the individual packages: abbrevs, achicago package, achicago bibstyle, attrib, blkcntrl, compsci, dialogue, lips, moredefs, newclude, slemph, titles.\n"
+"\n"
+"date: 2012-05-19 17:46:22 +0000"
+msgstr ""
-#. summary(texlive-needspace:texlive-needspace-doc)
+#. summary(texlive-specs-i:texlive-frankenstein-doc)
#, fuzzy
-msgid "Documentation for texlive-needspace"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-frankenstein"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-newenviron:texlive-newenviron-doc)
+#. description(texlive-specs-i:texlive-frankenstein-doc)
#, fuzzy
-msgid "Documentation for texlive-newenviron"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frankenstein"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-newfile:texlive-newfile-doc)
-#, fuzzy
-msgid "Documentation for texlive-newfile"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-frcursive)
+msgid "French cursive hand fonts"
+msgstr ""
-#. summary(texlive-newlfm:texlive-newlfm-doc)
-#, fuzzy
-msgid "Documentation for texlive-newlfm"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-frcursive)
+msgid ""
+"A hand-writing font in the style of the French academic running-hand. The font was written in Metafont and and has been converted to Adobe Type 1 format. LaTeX support (NFFS fd files, and a package) and font maps are provided.\n"
+"\n"
+"date: 2014-05-01 21:14:09 +0000"
+msgstr ""
-#. summary(texlive-newpx:texlive-newpx-doc)
+#. summary(texlive-specs-i:texlive-frcursive-doc)
#, fuzzy
-msgid "Documentation for texlive-newpx"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-frcursive"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-newsletr:texlive-newsletr-doc)
+#. description(texlive-specs-i:texlive-frcursive-doc)
#, fuzzy
-msgid "Documentation for texlive-newsletr"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frcursive"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-newspaper:texlive-newspaper-doc)
-#, fuzzy
-msgid "Documentation for texlive-newspaper"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-frcursive-fonts)
+msgid "Severed fonts for texlive-frcursive"
+msgstr ""
-#. summary(texlive-newtx:texlive-newtx-doc)
-#, fuzzy
-msgid "Documentation for texlive-newtx"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-frcursive-fonts)
+msgid "The separated fonts package for texlive-frcursive"
+msgstr ""
-#. summary(texlive-newunicodechar:texlive-newunicodechar-doc)
-#, fuzzy
-msgid "Documentation for texlive-newunicodechar"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-frege)
+msgid "Typeset fregean Begriffsschrift"
+msgstr ""
-#. summary(texlive-newvbtm:texlive-newvbtm-doc)
-#, fuzzy
-msgid "Documentation for texlive-newvbtm"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-frege)
+msgid ""
+"The package defines a number of new commands for typesetting fregean Begriffsschrift in LaTeX. It is loosely based on the package begriff, and offers a number of improvements including better relative lengths of the content stroke with respect to other strokes, content strokes that point at the middle of lines rather than the bottom, a greater width for the assertion stroke as compared to the content stroke, a more intuitive structure for the conditional, greater care taken to allow for the linewidth in the spacing of formulas.\n"
+"\n"
+"date: 2014-03-25 18:16:16 +0000"
+msgstr ""
-#. summary(texlive-newverbs:texlive-newverbs-doc)
+#. summary(texlive-specs-i:texlive-frege-doc)
#, fuzzy
-msgid "Documentation for texlive-newverbs"
+msgid "Documentation for texlive-frege"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nfssext-cfr:texlive-nfssext-cfr-doc)
+#. description(texlive-specs-i:texlive-frege-doc)
#, fuzzy
-msgid "Documentation for texlive-nfssext-cfr"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frege"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nicefilelist:texlive-nicefilelist-doc)
-#, fuzzy
-msgid "Documentation for texlive-nicefilelist"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-frenchle)
+msgid "French macros, usable stand-alone or with Babel"
+msgstr ""
-#. summary(texlive-niceframe:texlive-niceframe-doc)
-#, fuzzy
-#| msgid "Documentation for digiKam"
-msgid "Documentation for texlive-niceframe"
-msgstr "Dokumentace pro digiKam"
+#. description(texlive-specs-i:texlive-frenchle)
+msgid ""
+"This is a redistribution and repackaging of the late Bernard Gaulle's \"light\" package to typeset French documents according to the rules of the \"Imprimerie Nationale\". The package offers a package, two Babel language definition files (french.ldf and frenchle.ldf), and a package to enable the non-standard definition files to be loaded into an unmodified Babel. The user may simply use frenchle.sty if typesetting a French-only document, but should use Babel with the frenchle option for a multilingual document.\n"
+"\n"
+"date: 2012-05-30 22:57:47 +0000"
+msgstr ""
-#. summary(texlive-nicetext:texlive-nicetext-doc)
+#. summary(texlive-specs-i:texlive-frenchle-doc)
#, fuzzy
-msgid "Documentation for texlive-nicetext"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-frenchle"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-nih:texlive-nih-doc)
+#. description(texlive-specs-i:texlive-frenchle-doc)
#, fuzzy
-msgid "Documentation for texlive-nih"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frenchle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nkarta:texlive-nkarta-doc)
+#. summary(texlive-specs-i:texlive-frletter)
+msgid "Typeset letters in the French style"
+msgstr ""
+
+#. description(texlive-specs-i:texlive-frletter)
+msgid ""
+"A small class for typesetting letters in France. No assumption is made about the language in use. The class represents a small modification of the beletter class, which is itself a modification of the standard LaTeX letter class.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-i:texlive-frletter-doc)
#, fuzzy
-msgid "Documentation for texlive-nkarta"
+msgid "Documentation for texlive-frletter"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nlctdoc:texlive-nlctdoc-doc)
+#. description(texlive-specs-i:texlive-frletter-doc)
#, fuzzy
-msgid "Documentation for texlive-nlctdoc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frletter"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-noconflict:texlive-noconflict-doc)
-msgid "Documentation for texlive-noconflict"
+#. summary(texlive-specs-i:texlive-frontespizio)
+msgid "Create a frontispiece for Italian theses"
msgstr ""
-#. summary(texlive-noitcrul:texlive-noitcrul-doc)
-#, fuzzy
-msgid "Documentation for texlive-noitcrul"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-frontespizio)
+msgid ""
+"Typesetting a frontispiece independently of the layout of the main document is difficult. This package provides a solution by producing an auxiliary TeX file to be typeset on its own and the result is automatically included at the next run. The markup necessary for the frontispiece is written in the main document in a frontespizio environment. Documentation is mainly in Italian, as the style is probably apt only to theses in Italy.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-nolbreaks:texlive-nolbreaks-doc)
+#. summary(texlive-specs-i:texlive-frontespizio-doc)
#, fuzzy
-msgid "Documentation for texlive-nolbreaks"
+msgid "Documentation for texlive-frontespizio"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nomencl:texlive-nomencl-doc)
+#. description(texlive-specs-i:texlive-frontespizio-doc)
#, fuzzy
-msgid "Documentation for texlive-nomencl"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-frontespizio"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nomentbl:texlive-nomentbl-doc)
-#, fuzzy
-msgid "Documentation for texlive-nomentbl"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-ftcap)
+msgid "Allows \\caption at the beginning of a table-environment"
+msgstr ""
-#. summary(texlive-nonfloat:texlive-nonfloat-doc)
-#, fuzzy
-msgid "Documentation for texlive-nonfloat"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-ftcap)
+msgid ""
+"For several reasons a \\caption may be desirable at the top of a table environment. This package changes the table environment such that \\abovecaptionskip and \\belowcaptionskip are swapped. The package should also work with a non-standard table environment.\n"
+"\n"
+"date: 2012-05-19 21:15:24 +0000"
+msgstr ""
-#. summary(texlive-nonumonpart:texlive-nonumonpart-doc)
+#. summary(texlive-specs-i:texlive-ftcap-doc)
#, fuzzy
-msgid "Documentation for texlive-nonumonpart"
+msgid "Documentation for texlive-ftcap"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nopageno:texlive-nopageno-doc)
+#. description(texlive-specs-i:texlive-ftcap-doc)
#, fuzzy
-msgid "Documentation for texlive-nopageno"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ftcap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nostarch:texlive-nostarch-doc)
-#, fuzzy
-msgid "Documentation for texlive-nostarch"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-i:texlive-ftnxtra)
+msgid "Extend the applicability of the \\footnote command"
+msgstr ""
-#. summary(texlive-notes:texlive-notes-doc)
-#, fuzzy
-msgid "Documentation for texlive-notes"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-i:texlive-ftnxtra)
+msgid ""
+"The package treats footnotes in \\caption, the tabular environment, and \\chapter and other \\section-like commands.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-notes2bib:texlive-notes2bib-doc)
+#. summary(texlive-specs-i:texlive-ftnxtra-doc)
#, fuzzy
-msgid "Documentation for texlive-notes2bib"
+msgid "Documentation for texlive-ftnxtra"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-notoccite:texlive-notoccite-doc)
+#. description(texlive-specs-i:texlive-ftnxtra-doc)
#, fuzzy
-msgid "Documentation for texlive-notoccite"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ftnxtra"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nowidow:texlive-nowidow-doc)
-#, fuzzy
-msgid "Documentation for texlive-nowidow"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-fullblck)
+msgid "Left-blocking for letter class"
+msgstr ""
-#. summary(texlive-nrc:texlive-nrc-doc)
+#. description(texlive-specs-j:texlive-fullblck)
+msgid ""
+"Used with the letter documentclass to set the letter in a fullblock style (everything at the left margin).\n"
+"\n"
+"date: 2012-05-19 21:15:24 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-fullblck-doc)
#, fuzzy
-msgid "Documentation for texlive-nrc"
+msgid "Documentation for texlive-fullblck"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ntgclass:texlive-ntgclass-doc)
+#. description(texlive-specs-j:texlive-fullblck-doc)
#, fuzzy
-msgid "Documentation for texlive-ntgclass"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-fullblck"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ntheorem:texlive-ntheorem-doc)
+#. summary(texlive-specs-j:texlive-fullwidth)
+msgid "Adjust margins of text block"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-fullwidth)
+msgid ""
+"The package provides the environment fullwidth, which sets the left and right margins in a simple way. There is no constraint about page breaks; if you are using the twoside mode, you can set the inner and outer margins to avoid the effects of the different margins.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-fullwidth-doc)
#, fuzzy
-msgid "Documentation for texlive-ntheorem"
+msgid "Documentation for texlive-fullwidth"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nuc:texlive-nuc-doc)
+#. description(texlive-specs-j:texlive-fullwidth-doc)
#, fuzzy
-msgid "Documentation for texlive-nuc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fullwidth"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-numberedblock:texlive-numberedblock-doc)
-msgid "Documentation for texlive-numberedblock"
+#. summary(texlive-specs-j:texlive-functan)
+msgid "Macros for functional analysis and PDE theory"
msgstr ""
-#. summary(texlive-numericplots:texlive-numericplots-doc)
-#, fuzzy
-msgid "Documentation for texlive-numericplots"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-functan)
+msgid ""
+"This package provides a convenient and coherent way to deal with name of functional spaces (mainly Sobolev spaces) in functional analysis and PDE theory. It also provides a set of macros for dealing with norms, scalar products and convergence with some object oriented flavor (it gives the possibility to override the standard behavior of norms, ...).\n"
+"\n"
+"date: 2012-06-04 09:02:08 +0000"
+msgstr ""
-#. summary(texlive-numname:texlive-numname-doc)
+#. summary(texlive-specs-j:texlive-functan-doc)
#, fuzzy
-msgid "Documentation for texlive-numname"
+msgid "Documentation for texlive-functan"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-numprint:texlive-numprint-doc)
+#. description(texlive-specs-j:texlive-functan-doc)
#, fuzzy
-msgid "Documentation for texlive-numprint"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-functan"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-oberdiek:texlive-oberdiek-doc)
+#. summary(texlive-specs-j:texlive-fundus-calligra)
+msgid "Support for the calligra font in LaTeX documents"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-fundus-calligra)
+msgid ""
+"The package offers support for the calligra handwriting font, in LaTeX documents. The package is part of the fundus bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-fundus-calligra-doc)
#, fuzzy
-msgid "Documentation for texlive-oberdiek"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-fundus-calligra"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-objectz:texlive-objectz-doc)
+#. description(texlive-specs-j:texlive-fundus-calligra-doc)
#, fuzzy
-msgid "Documentation for texlive-objectz"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fundus-calligra"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ocg-p:texlive-ocg-p-doc)
-msgid "Documentation for texlive-ocg-p"
+#. summary(texlive-specs-j:texlive-fundus-cyr)
+msgid "Support for Washington University Cyrillic fonts"
msgstr ""
-#. summary(texlive-ocgx:texlive-ocgx-doc)
-msgid "Documentation for texlive-ocgx"
+#. description(texlive-specs-j:texlive-fundus-cyr)
+msgid ""
+"The package supports the use of the Washington Cyrillic fonts with LaTeX (Note that standard LateX has support, too, as encoding OT2). The package is distributed as part of the fundus bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ocherokee:texlive-ocherokee-doc)
-#, fuzzy
-msgid "Documentation for texlive-ocherokee"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-fundus-sueterlin)
+msgid "Sutterlin"
+msgstr ""
-#. summary(texlive-ocr-b:texlive-ocr-b-doc)
-#, fuzzy
-msgid "Documentation for texlive-ocr-b"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-fundus-sueterlin)
+msgid ""
+"The package supports use, in LaTeX, of the MetaFont emulation of the Sueterlin handwriting fonts The package is distributed as part of the fundus bundle..\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-ocr-b-outline:texlive-ocr-b-outline-doc)
+#. summary(texlive-specs-j:texlive-fundus-sueterlin-doc)
#, fuzzy
-msgid "Documentation for texlive-ocr-b-outline"
+msgid "Documentation for texlive-fundus-sueterlin"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ocr-latex:texlive-ocr-latex-doc)
+#. description(texlive-specs-j:texlive-fundus-sueterlin-doc)
#, fuzzy
-msgid "Documentation for texlive-ocr-latex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fundus-sueterlin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-octavo:texlive-octavo-doc)
-#, fuzzy
-msgid "Documentation for texlive-octavo"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-fwlw)
+msgid "Get first and last words of a page"
+msgstr ""
-#. summary(texlive-odsfile:texlive-odsfile-doc)
-msgid "Documentation for texlive-odsfile"
+#. description(texlive-specs-j:texlive-fwlw)
+msgid ""
+"The package extracts the first and last words of a page, together with the first word of the next page, just before the page is formed into the object to print. The package defines a couple of page styles that use the words that have been extracted.\n"
+"\n"
+"date: 2012-06-04 09:02:08 +0000"
msgstr ""
-#. summary(texlive-ofs:texlive-ofs-doc)
+#. summary(texlive-specs-j:texlive-fwlw-doc)
#, fuzzy
-msgid "Documentation for texlive-ofs"
+msgid "Documentation for texlive-fwlw"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ogham:texlive-ogham-doc)
+#. description(texlive-specs-j:texlive-fwlw-doc)
#, fuzzy
-msgid "Documentation for texlive-ogham"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-fwlw"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-oinuit:texlive-oinuit-doc)
-#, fuzzy
-msgid "Documentation for texlive-oinuit"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-g-brief)
+msgid "Letter document class"
+msgstr ""
-#. summary(texlive-oldlatin:texlive-oldlatin-doc)
-#, fuzzy
-msgid "Documentation for texlive-oldlatin"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-g-brief)
+msgid ""
+"Designed for formatting formless letters in German; can also be used for English (by those who can read the documentation). There are LaTeX 2.09 documentstyle and LaTeX 2e class files for both an 'old' and a 'new' version of g-brief.\n"
+"\n"
+"date: 2012-06-04 21:28:06 +0000"
+msgstr ""
-#. summary(texlive-oldstandard:texlive-oldstandard-doc)
+#. summary(texlive-specs-j:texlive-g-brief-doc)
#, fuzzy
-msgid "Documentation for texlive-oldstandard"
+msgid "Documentation for texlive-g-brief"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-oldstyle:texlive-oldstyle-doc)
+#. description(texlive-specs-j:texlive-g-brief-doc)
#, fuzzy
-msgid "Documentation for texlive-oldstyle"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-g-brief"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-omega:texlive-omega-doc)
-#, fuzzy
-msgid "Documentation for texlive-omega"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gaceta)
+msgid "A class to typeset La Gaceta de la RSME"
+msgstr ""
-#. summary(texlive-onlyamsmath:texlive-onlyamsmath-doc)
+#. description(texlive-specs-j:texlive-gaceta)
+msgid ""
+"The class will typeset papers for <<La Gaceta de la Real Sociedad Matematica Espanola>>.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gaceta-doc)
#, fuzzy
-msgid "Documentation for texlive-onlyamsmath"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-gaceta"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-onrannual:texlive-onrannual-doc)
+#. description(texlive-specs-j:texlive-gaceta-doc)
#, fuzzy
-msgid "Documentation for texlive-onrannual"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gaceta"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-opcit:texlive-opcit-doc)
+#. summary(texlive-specs-j:texlive-galois)
+msgid "Typeset Galois connections"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-galois)
+msgid ""
+"The package deals with connections in two-dimensional style, optionally in colour.\n"
+"\n"
+"date: 2012-06-04 09:02:08 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-galois-doc)
#, fuzzy
-msgid "Documentation for texlive-opcit"
+msgid "Documentation for texlive-galois"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-opensans:texlive-opensans-doc)
+#. description(texlive-specs-j:texlive-galois-doc)
#, fuzzy
-msgid "Documentation for texlive-opensans"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-galois"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-opteng:texlive-opteng-doc)
-msgid "Documentation for texlive-opteng"
+#. summary(texlive-specs-j:texlive-gamebook)
+msgid "Typeset gamebooks and other interactive novels"
msgstr ""
-#. summary(texlive-optional:texlive-optional-doc)
-#, fuzzy
-msgid "Documentation for texlive-optional"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gamebook)
+msgid ""
+"This package provides the means in order to lay-out gamebooks with LaTeX. A simple gamebook example is included with the package, and acts as a tutorial.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-ordinalpt:texlive-ordinalpt-doc)
+#. summary(texlive-specs-j:texlive-gamebook-doc)
#, fuzzy
-msgid "Documentation for texlive-ordinalpt"
+msgid "Documentation for texlive-gamebook"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-orkhun:texlive-orkhun-doc)
+#. description(texlive-specs-j:texlive-gamebook-doc)
#, fuzzy
-msgid "Documentation for texlive-orkhun"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gamebook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-oscola:texlive-oscola-doc)
-msgid "Documentation for texlive-oscola"
+#. summary(texlive-specs-j:texlive-garrigues)
+msgid "MetaPost macros for the reproduction of Garrigues' Easter nomogram"
msgstr ""
-#. summary(texlive-ot-tableau:texlive-ot-tableau-doc)
+#. description(texlive-specs-j:texlive-garrigues)
+msgid ""
+"Metapost macros for the reproduction of Garrigues' Easter nomogram. These macros are described in Denis Roegel: An introduction to nomography: Garrigues' nomogram for the computation of Easter, TUGboat (volume 30, number 1, 2009, pages 88-104)\n"
+"\n"
+"date: 2012-06-04 11:21:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-garrigues-doc)
#, fuzzy
-msgid "Documentation for texlive-ot-tableau"
+msgid "Documentation for texlive-garrigues"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-othello:texlive-othello-doc)
+#. description(texlive-specs-j:texlive-garrigues-doc)
#, fuzzy
-msgid "Documentation for texlive-othello"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-garrigues"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-othelloboard:texlive-othelloboard-doc)
+#. summary(texlive-specs-j:texlive-garuda-c90)
#, fuzzy
-msgid "Documentation for texlive-othelloboard"
-msgstr "Dokumentace pro adaptx"
+msgid "TeX support (from CJK) for the garuda font"
+msgstr "XML podpora pro castor"
-#. summary(texlive-otibet:texlive-otibet-doc)
+#. description(texlive-specs-j:texlive-garuda-c90)
+msgid "The garuda-c90 package"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gastex)
+msgid "Graphs and Automata Simplified in TeX"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gastex)
+msgid ""
+"GasTeX is a set of LaTeX macros which enable the user to draw graphs, automata, nets, diagrams, etc., very easily, in the LaTeX picture environment. The package offers no documentation (per se), but offers a couple of example files in the distribution, and more on its home page. GasTeX generates its own PostScript code, and therefore doesn't work directly under PDFLaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gastex-doc)
#, fuzzy
-msgid "Documentation for texlive-otibet"
+msgid "Documentation for texlive-gastex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-oubraces:texlive-oubraces-doc)
+#. description(texlive-specs-j:texlive-gastex-doc)
#, fuzzy
-msgid "Documentation for texlive-oubraces"
-msgstr "HTML dokumentace pro GNU C Library"
+msgid "This package includes the documentation for texlive-gastex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-outline:texlive-outline-doc)
-#, fuzzy
-msgid "Documentation for texlive-outline"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gatech-thesis)
+msgid "Georgia Institute of Technology thesis class"
+msgstr ""
-#. summary(texlive-outliner:texlive-outliner-doc)
+#. description(texlive-specs-j:texlive-gatech-thesis)
+msgid ""
+"The output generated by using this class has been approved by the Georgia Tech Office of Graduate Studies. It satisfies their undocumented moving-target requirements in additional to the actual documented requirements of the June 2002 Georgia Tech Thesis Style Manual, as amended up to 2010.\n"
+"\n"
+"date: 2012-02-09 19:33:55 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gatech-thesis-doc)
#, fuzzy
-msgid "Documentation for texlive-outliner"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-gatech-thesis"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-outlines:texlive-outlines-doc)
+#. description(texlive-specs-j:texlive-gatech-thesis-doc)
#, fuzzy
-msgid "Documentation for texlive-outlines"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gatech-thesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-overpic:texlive-overpic-doc)
+#. summary(texlive-specs-j:texlive-gates)
+msgid "Support for writing modular and customisable code"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gates)
+msgid ""
+"The package provides the means of writing code in a modular fashion: big macros or functions are divided into small chunks (called gates) with names, which can be externally controlled (e.g. they can be disabled, subjected to conditionals, loops...) and/or augmented with new chunks. Thus complex code may easily be customised without having to rewrite it, or even understand its implementation: the behavior of existing gates can be modified, and new ones can be added, without endangering the whole design. This allows code to be hacked in ways the original authors might have never envisioned. The gates package is implemented independently for both TeX and Lua. The TeX implementation, running in any current environment, requires the texapi package, whereas the Lua version can be run with any Lua interpreter, not just LuaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gates-doc)
#, fuzzy
-msgid "Documentation for texlive-overpic"
+msgid "Documentation for texlive-gates"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pacioli:texlive-pacioli-doc)
+#. description(texlive-specs-j:texlive-gates-doc)
#, fuzzy
-msgid "Documentation for texlive-pacioli"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gates"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pagecolor:texlive-pagecolor-doc)
+#. summary(texlive-specs-j:texlive-gauss)
+msgid "A package for Gaussian operations"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gauss)
+msgid ""
+"The gauss package provides configurable tools for producing row and column operations on matrices (a.k.a. Gaussian operations).\n"
+"\n"
+"date: 2012-04-10 15:44:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gauss-doc)
#, fuzzy
-msgid "Documentation for texlive-pagecolor"
+msgid "Documentation for texlive-gauss"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pagecont:texlive-pagecont-doc)
+#. description(texlive-specs-j:texlive-gauss-doc)
#, fuzzy
-msgid "Documentation for texlive-pagecont"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-gauss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pagenote:texlive-pagenote-doc)
+#. summary(texlive-specs-j:texlive-gb4e)
+msgid "Linguistic tools"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gb4e)
+msgid ""
+"Provides an environment for linguistic examples, tools for glosses, and various other goodies. The code was developed from the midnight and covington packages.\n"
+"\n"
+"date: 2012-02-10 17:22:03 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gb4e-doc)
#, fuzzy
-msgid "Documentation for texlive-pagenote"
+msgid "Documentation for texlive-gb4e"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pagerange:texlive-pagerange-doc)
+#. description(texlive-specs-j:texlive-gb4e-doc)
#, fuzzy
-msgid "Documentation for texlive-pagerange"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gb4e"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pageslts:texlive-pageslts-doc)
+#. summary(texlive-specs-j:texlive-gcard)
+msgid "Arrange text on a sheet to fold into a greeting card"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gcard)
+msgid ""
+"The package provides a simple means of producing greeting cards. It arranges four panels onto a single sheet so that when the sheet is folded twice the four panels are arranged as front cover, inside left and right pages, and back cover. It uses the textpos package for placement on the sheet and the graphicx package for the necessary rotation. The four panels are set in minipages for formatting by the user.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gcard-doc)
#, fuzzy
-msgid "Documentation for texlive-pageslts"
+msgid "Documentation for texlive-gcard"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-paper:texlive-paper-doc)
+#. description(texlive-specs-j:texlive-gcard-doc)
#, fuzzy
-msgid "Documentation for texlive-paper"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gcard"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-papercdcase:texlive-papercdcase-doc)
+#. summary(texlive-specs-j:texlive-gchords)
+msgid "Typeset guitar chords"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gchords)
+msgid ""
+"A LaTeX package for typesetting of guitar chord diagrams, including options for chord names, finger numbers and typesetting above lyrics. The bundle also includes a TCL script (chordbox.tcl) that provides a graphical application which creates LaTeX files that use gchords.sty.\n"
+"\n"
+"date: 2012-06-04 11:21:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gchords-doc)
#, fuzzy
-msgid "Documentation for texlive-papercdcase"
+msgid "Documentation for texlive-gchords"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-papermas:texlive-papermas-doc)
+#. description(texlive-specs-j:texlive-gchords-doc)
#, fuzzy
-msgid "Documentation for texlive-papermas"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-gchords"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-papertex:texlive-papertex-doc)
-#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-papertex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gcite)
+msgid "Citations in a reader-friendly style"
+msgstr ""
-#. summary(texlive-paracol:texlive-paracol-doc)
+#. description(texlive-specs-j:texlive-gcite)
+msgid ""
+"The package allows citations in the German style, which is considered by many to be particularly reader-friendly. The citation provides a small amount of bibliographic information in a footnote on the page where each citation is made. It combines a desire to eliminate unnecessary page-turning with the look-up efficiency afforded by numeric citations. The package makes use of BibLaTeX, and is considered experimental; comment is invited.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gcite-doc)
#, fuzzy
-msgid "Documentation for texlive-paracol"
+msgid "Documentation for texlive-gcite"
msgstr "Dokumentace pro castor"
-#. summary(texlive-paralist:texlive-paralist-doc)
+#. description(texlive-specs-j:texlive-gcite-doc)
#, fuzzy
-msgid "Documentation for texlive-paralist"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gcite"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-parallel:texlive-parallel-doc)
-#, fuzzy
-msgid "Documentation for texlive-parallel"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-j:texlive-gene-logic)
+msgid "Typeset logic formulae, etcetera"
+msgstr ""
-#. summary(texlive-paratype:texlive-paratype-doc)
+#. description(texlive-specs-j:texlive-gene-logic)
+msgid ""
+"The package provides a facility to typeset certain logic formulae. It provides an environment like eqnarray, a newtheorem-like environment (NewTheorem), and several macros.\n"
+"\n"
+"date: 2012-06-04 11:21:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gene-logic-doc)
#, fuzzy
-msgid "Documentation for texlive-paratype"
+msgid "Documentation for texlive-gene-logic"
msgstr "Dokumentace pro gawk"
-#. summary(texlive-paresse:texlive-paresse-doc)
+#. description(texlive-specs-j:texlive-gene-logic-doc)
#, fuzzy
-msgid "Documentation for texlive-paresse"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gene-logic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-parnotes:texlive-parnotes-doc)
-#, fuzzy
-msgid "Documentation for texlive-parnotes"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-genealogy)
+msgid "A compilation genealogy font"
+msgstr ""
-#. summary(texlive-parrun:texlive-parrun-doc)
-#, fuzzy
-msgid "Documentation for texlive-parrun"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-genealogy)
+msgid ""
+"A simple compilation of the genealogical symbols found in the wasy and gen fonts, adding the male and female symbols to Knuth's 'gen' font, and so avoiding loading two fonts when you need only genealogical symbols. The font is distributed as Metafont source.\n"
+"\n"
+"date: 2014-05-01 21:29:17 +0000"
+msgstr ""
-#. summary(texlive-parselines:texlive-parselines-doc)
+#. summary(texlive-specs-j:texlive-genealogy-doc)
#, fuzzy
-msgid "Documentation for texlive-parselines"
+msgid "Documentation for texlive-genealogy"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-parskip:texlive-parskip-doc)
+#. description(texlive-specs-j:texlive-genealogy-doc)
#, fuzzy
-msgid "Documentation for texlive-parskip"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-genealogy"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-patchcmd:texlive-patchcmd-doc)
-#, fuzzy
-msgid "Documentation for texlive-patchcmd"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-genmisc)
+msgid "Package genmisc"
+msgstr "Balíček genmisc"
-#. summary(texlive-path:texlive-path-doc)
-#, fuzzy
-msgid "Documentation for texlive-path"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-genmisc)
+msgid "The genmisc package"
+msgstr ""
-#. summary(texlive-pauldoc:texlive-pauldoc-doc)
-#, fuzzy
-msgid "Documentation for texlive-pauldoc"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-genmpage)
+msgid "Generalization of LaTeX's minipages"
+msgstr ""
-#. summary(texlive-pawpict:texlive-pawpict-doc)
+#. description(texlive-specs-j:texlive-genmpage)
+msgid ""
+"The GenMPage package generalizes LaTeX's minipages. Keyval options and styles can be used to determine their appearance in an easy and consistent way. Includes options for paragraph indentation and vertical alignment with respect to the visual top and bottom margins.\n"
+"\n"
+"date: 2012-06-19 18:29:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-genmpage-doc)
#, fuzzy
-msgid "Documentation for texlive-pawpict"
+msgid "Documentation for texlive-genmpage"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pax:texlive-pax-doc)
+#. description(texlive-specs-j:texlive-genmpage-doc)
#, fuzzy
-msgid "Documentation for texlive-pax"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-genmpage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pb-diagram:texlive-pb-diagram-doc)
+#. summary(texlive-specs-j:texlive-gentium-tug)
+msgid "Gentium fonts (in two formats) and support files"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gentium-tug)
+msgid ""
+"Gentium is a typeface family designed to enable the diverse ethnic groups around the world who use the Latin, Cyrillic and Greek scripts to produce readable, high-quality publications. It supports a wide range of Latin- and Cyrillic-based alphabets. The package consists of: The original (unaltered) GentiumPlus, GentiumBook, and other Gentium-family fonts in TrueType format, as developed by SIL and released under the OFL (see OFL.txt and OFL-FAQ.txt); Converted fonts in PostScript Type 1 format, released under the same terms. These incorporate the name \"Gentium\" by permission of SIL given to the TeX Users Group; ConTeXt, LaTeX and other supporting files; TeX-related documentation, and the SIL documentation and other files.\n"
+"\n"
+"date: 2014-05-01 21:29:17 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gentium-tug-doc)
#, fuzzy
#| msgid "Documentation for digiKam"
-msgid "Documentation for texlive-pb-diagram"
+msgid "Documentation for texlive-gentium-tug"
msgstr "Dokumentace pro digiKam"
-#. summary(texlive-pbox:texlive-pbox-doc)
+#. description(texlive-specs-j:texlive-gentium-tug-doc)
#, fuzzy
-msgid "Documentation for texlive-pbox"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gentium-tug"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pbsheet:texlive-pbsheet-doc)
+#. summary(texlive-specs-j:texlive-gentium-tug-fonts)
#, fuzzy
-msgid "Documentation for texlive-pbsheet"
-msgstr "Dokumentace pro adaptx"
+msgid "Severed fonts for texlive-gentium-tug"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-pdf-trans:texlive-pdf-trans-doc)
+#. description(texlive-specs-j:texlive-gentium-tug-fonts)
#, fuzzy
-msgid "Documentation for texlive-pdf-trans"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-gentium-tug"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-pdf14:texlive-pdf14-doc)
-#, fuzzy
-msgid "Documentation for texlive-pdf14"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gentle)
+msgid "A Gentle Introduction to TeX"
+msgstr ""
-#. summary(texlive-pdfcomment:texlive-pdfcomment-doc)
-#, fuzzy
-msgid "Documentation for texlive-pdfcomment"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gentle)
+msgid ""
+"The \"Gentle Introduction\" is the longest-established comprehensive free tutorial on the use of plain TeX.\n"
+"\n"
+"date: 2012-05-30 15:51:05 +0000"
+msgstr ""
-#. summary(texlive-pdfcprot:texlive-pdfcprot-doc)
+#. summary(texlive-specs-j:texlive-geometry)
#, fuzzy
-msgid "Documentation for texlive-pdfcprot"
-msgstr "Dokumentace pro adaptx"
+msgid "Flexible and complete interface to document dimensions"
+msgstr "Rozhraní, které vybrat při spuštění:"
-#. summary(texlive-pdfcrop:texlive-pdfcrop-doc)
-#, fuzzy
-msgid "Documentation for texlive-pdfcrop"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-geometry)
+msgid ""
+"The package provides an easy and flexible user interface to customize page layout, implementing auto-centering and auto- balancing mechanisms so that the users have only to give the least description for the page layout. For example, if you want to set each margin 2cm without header space, what you need is just \\usepackage[margin=2cm,nohead]{geometry}. The package knows about all the standard paper sizes, so that the user need not know what the nominal 'real' dimensions of the paper are, just its standard name (such as a4, letter, etc.). An important feature is the package's ability to communicate the paper size it's set up to the output (whether via DVI \\specials or via direct interaction with PDF(La)TeX).\n"
+"\n"
+"date: 2011-10-04 09:41:19 +0000"
+msgstr ""
-#. summary(texlive-pdfjam:texlive-pdfjam-doc)
-#, fuzzy
-msgid "Documentation for texlive-pdfjam"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-geometry-de)
+msgid "German translation of the geometry package"
+msgstr ""
-#. summary(texlive-pdfmarginpar:texlive-pdfmarginpar-doc)
+#. description(texlive-specs-j:texlive-geometry-de)
+msgid ""
+"German translation of the geometry package, by Hans-Martin Haase of the University of Jena.\n"
+"\n"
+"date: 2012-05-30 15:51:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-geometry-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfmarginpar"
+msgid "Documentation for texlive-geometry"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pdfpages:texlive-pdfpages-doc)
+#. description(texlive-specs-j:texlive-geometry-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfpages"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-geometry"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pdfscreen:texlive-pdfscreen-doc)
+#. summary(texlive-specs-j:texlive-german)
+msgid "Support for German typography"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-german)
+msgid ""
+"Supports the new German orthography (neue deutsche Rechtschreibung).\n"
+"\n"
+"date: 2012-06-19 18:29:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-german-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfscreen"
+msgid "Documentation for texlive-german"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pdfslide:texlive-pdfslide-doc)
+#. description(texlive-specs-j:texlive-german-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfslide"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-german"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pdfsync:texlive-pdfsync-doc)
+#. summary(texlive-specs-j:texlive-germbib)
+msgid "German variants of standard BibTeX styles"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-germbib)
+msgid ""
+"A development of the (old) german.sty, this bundle provides German packages, BibTeX styles and documentary examples, for writing documents with bibliographies. The author has since developed the babelbib bundle, which (he asserts) supersedes germbib.\n"
+"\n"
+"date: 2012-06-19 18:29:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-germbib-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfsync"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-germbib"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-pdftex:texlive-pdftex-doc)
+#. description(texlive-specs-j:texlive-germbib-doc)
#, fuzzy
-msgid "Documentation for texlive-pdftex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-germbib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pdftools:texlive-pdftools-doc)
+#. summary(texlive-specs-j:texlive-germkorr)
+msgid "Change kerning for german quotation marks"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-germkorr)
+msgid ""
+"The package germcorr has to be loaded after the package german. It brings some letters like T nearer to german single and double quotes even when that letter wears a standard accent like \"`\\.T\"'.\n"
+"\n"
+"date: 2012-06-19 18:29:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-germkorr-doc)
#, fuzzy
-msgid "Documentation for texlive-pdftools"
+msgid "Documentation for texlive-germkorr"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pdftricks:texlive-pdftricks-doc)
+#. description(texlive-specs-j:texlive-germkorr-doc)
#, fuzzy
-msgid "Documentation for texlive-pdftricks"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-germkorr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pdfwin:texlive-pdfwin-doc)
+#. summary(texlive-specs-j:texlive-geschichtsfrkl)
+msgid "BibLaTeX style for historians"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-geschichtsfrkl)
+msgid ""
+"The package provides a BibLaTeX style, (mostly) meeting the requirements of the History Faculty of the University of Freiburg (Germany).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-geschichtsfrkl-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfwin"
+msgid "Documentation for texlive-geschichtsfrkl"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pdfx:texlive-pdfx-doc)
+#. description(texlive-specs-j:texlive-geschichtsfrkl-doc)
#, fuzzy
-msgid "Documentation for texlive-pdfx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-geschichtsfrkl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pecha:texlive-pecha-doc)
+#. summary(texlive-specs-j:texlive-getfiledate)
+msgid "Find the date of last modification of a file"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-getfiledate)
+msgid ""
+"The package fetches from the system the date of last modification or opening of an existing file, using the function \\pdffilemoddate (present in recent versions of PDFTeX); the user may specify how the date is to be presented.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-getfiledate-doc)
#, fuzzy
-msgid "Documentation for texlive-pecha"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-getfiledate"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pedigree-perl:texlive-pedigree-perl-doc)
+#. description(texlive-specs-j:texlive-getfiledate-doc)
#, fuzzy
-msgid "Documentation for texlive-pedigree-perl"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-getfiledate"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-perception:texlive-perception-doc)
+#. summary(texlive-specs-j:texlive-getoptk)
+msgid "Define macros with sophisticated options"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-getoptk)
+msgid ""
+"The package provides a means of defining macros whose options are taken from a dictionary, which includes options which themselves have arguments. The package was designed for use with Plain TeX; its syntax derives from that of the \\hbox, \\hrule, etc., TeX primitives.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-getoptk-doc)
#, fuzzy
-msgid "Documentation for texlive-perception"
+msgid "Documentation for texlive-getoptk"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-perltex:texlive-perltex-doc)
+#. description(texlive-specs-j:texlive-getoptk-doc)
#, fuzzy
-msgid "Documentation for texlive-perltex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-getoptk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-permute:texlive-permute-doc)
+#. summary(texlive-specs-j:texlive-gfsartemisia)
+msgid "A modern Greek font design"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsartemisia)
+msgid ""
+"GFS Artemisia is a relatively modern font, designed as a 'general purpose' font in the same sense as Times is nowadays treated. The present version has been provided by the Greek Font Society. The font supports the Greek and Latin alphabets. LaTeX support is provided, using the OT1, T1 and LGR encodings.\n"
+"\n"
+"date: 2014-05-01 21:46:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsartemisia-doc)
#, fuzzy
-msgid "Documentation for texlive-permute"
+msgid "Documentation for texlive-gfsartemisia"
msgstr "Dokumentace pro castor"
-#. summary(texlive-persian-bib:texlive-persian-bib-doc)
+#. description(texlive-specs-j:texlive-gfsartemisia-doc)
#, fuzzy
-msgid "Documentation for texlive-persian-bib"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfsartemisia"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-persian-modern:texlive-persian-modern-doc)
-#, fuzzy
-msgid "Documentation for texlive-persian-modern"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gfsartemisia-fonts)
+msgid "Severed fonts for texlive-gfsartemisia"
+msgstr ""
-#. summary(texlive-petiteannonce:texlive-petiteannonce-doc)
-#, fuzzy
-msgid "Documentation for texlive-petiteannonce"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gfsartemisia-fonts)
+msgid "The separated fonts package for texlive-gfsartemisia"
+msgstr ""
-#. summary(texlive-petri-nets:texlive-petri-nets-doc)
-#, fuzzy
-msgid "Documentation for texlive-petri-nets"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gfsbaskerville)
+msgid "A Greek font, from one such by Baskerville"
+msgstr ""
-#. summary(texlive-pfarrei:texlive-pfarrei-doc)
-msgid "Documentation for texlive-pfarrei"
+#. description(texlive-specs-j:texlive-gfsbaskerville)
+msgid ""
+"The font is a digital implementation of Baskerville's classic Greek font, provided by the Greek Font Society. The font covers Greek only, and LaTeX support provides for the use of LGR encoding.\n"
+"\n"
+"date: 2014-05-01 21:46:06 +0000"
msgstr ""
-#. summary(texlive-pgf:texlive-pgf-doc)
+#. summary(texlive-specs-j:texlive-gfsbaskerville-doc)
#, fuzzy
-msgid "Documentation for texlive-pgf"
+msgid "Documentation for texlive-gfsbaskerville"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pgf-blur:texlive-pgf-blur-doc)
+#. description(texlive-specs-j:texlive-gfsbaskerville-doc)
#, fuzzy
-msgid "Documentation for texlive-pgf-blur"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfsbaskerville"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pgf-soroban:texlive-pgf-soroban-doc)
-#, fuzzy
-msgid "Documentation for texlive-pgf-soroban"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-j:texlive-gfsbaskerville-fonts)
+msgid "Severed fonts for texlive-gfsbaskerville"
+msgstr ""
-#. summary(texlive-pgf-umlsd:texlive-pgf-umlsd-doc)
-#, fuzzy
-msgid "Documentation for texlive-pgf-umlsd"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gfsbaskerville-fonts)
+msgid "The separated fonts package for texlive-gfsbaskerville"
+msgstr ""
-#. summary(texlive-pgfgantt:texlive-pgfgantt-doc)
+#. summary(texlive-specs-j:texlive-gfsbodoni)
+msgid "A Greek and Latin font based on Bodoni"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsbodoni)
+msgid ""
+"Bodoni's Greek fonts in the 18th century broke, for the first time, with the Byzantine cursive tradition of Greek fonts. GFS Bodoni resurrects his work for general use. The font family supports both Greek and Latin letters. LaTeX support of the fonts is provided, offering OT1, T1 and LGR encodings. The fonts themselves are provided in Adobe Type 1 and OpenType formats.\n"
+"\n"
+"date: 2014-05-02 13:05:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsbodoni-doc)
#, fuzzy
-msgid "Documentation for texlive-pgfgantt"
+msgid "Documentation for texlive-gfsbodoni"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pgfkeyx:texlive-pgfkeyx-doc)
+#. description(texlive-specs-j:texlive-gfsbodoni-doc)
#, fuzzy
-msgid "Documentation for texlive-pgfkeyx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfsbodoni"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pgfmolbio:texlive-pgfmolbio-doc)
+#. summary(texlive-specs-j:texlive-gfsbodoni-fonts)
+msgid "Severed fonts for texlive-gfsbodoni"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsbodoni-fonts)
+msgid "The separated fonts package for texlive-gfsbodoni"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfscomplutum)
+msgid "A Greek font with a long history"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfscomplutum)
+msgid ""
+"GFS Complutum derives, via a long development, from a minuscule-only font cut in the 16th century. An unsatisfactory set of majuscules were added in the early 20th century, but its author died before he could complete the revival of the font. The Greek Font Society has released this version, which has a new set of majuscules.\n"
+"\n"
+"date: 2014-05-02 13:05:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfscomplutum-doc)
#, fuzzy
-msgid "Documentation for texlive-pgfmolbio"
+msgid "Documentation for texlive-gfscomplutum"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pgfopts:texlive-pgfopts-doc)
+#. description(texlive-specs-j:texlive-gfscomplutum-doc)
#, fuzzy
-msgid "Documentation for texlive-pgfopts"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfscomplutum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pgfplots:texlive-pgfplots-doc)
+#. summary(texlive-specs-j:texlive-gfscomplutum-fonts)
+msgid "Severed fonts for texlive-gfscomplutum"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfscomplutum-fonts)
+msgid "The separated fonts package for texlive-gfscomplutum"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsdidot)
+msgid "A Greek font based on Didot's work"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsdidot)
+msgid ""
+"The design of Didot's 1805 Greek typeface was influenced by the neoclassical ideals of the late 18th century. The font was brought to Greece at the time of the 1821 Greek Revolution, by Didot's son, and was very widely used. The present version is provided by the Greek Font Society. The font supports the Greek alphabet, and is accompanied by a matching Latin alphabet based on Zapf's Palatino. LaTeX support is provided, using the OT1, T1 and LGR encodings.\n"
+"\n"
+"date: 2014-05-02 13:05:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsdidot-doc)
#, fuzzy
-msgid "Documentation for texlive-pgfplots"
+msgid "Documentation for texlive-gfsdidot"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-phaistos:texlive-phaistos-doc)
+#. description(texlive-specs-j:texlive-gfsdidot-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-phaistos"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-gfsdidot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-philex:texlive-philex-doc)
-#, fuzzy
-msgid "Documentation for texlive-philex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gfsdidot-fonts)
+msgid "Severed fonts for texlive-gfsdidot"
+msgstr ""
-#. summary(texlive-philokalia:texlive-philokalia-doc)
+#. description(texlive-specs-j:texlive-gfsdidot-fonts)
+msgid "The separated fonts package for texlive-gfsdidot"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsneohellenic)
+msgid "A Greek font in the Neo-Hellenic style"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsneohellenic)
+msgid ""
+"The NeoHellenic style evolved in academic circles in the 19th and 20th century; the present font follows a cut commissioned from Monotype in 1927. The present version was provided by the Greek Font Society. The font supports both Greek and Latin characters, and has been adjusted to work well with the cmbright fonts for mathematics support. LaTeX support of the fonts is provided, offering OT1, T1 and LGR encodings.\n"
+"\n"
+"date: 2014-05-02 13:05:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsneohellenic-doc)
#, fuzzy
-msgid "Documentation for texlive-philokalia"
+msgid "Documentation for texlive-gfsneohellenic"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-philosophersimprint:texlive-philosophersimprint-doc)
+#. description(texlive-specs-j:texlive-gfsneohellenic-doc)
#, fuzzy
-msgid "Documentation for texlive-philosophersimprint"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfsneohellenic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-phonetic:texlive-phonetic-doc)
+#. summary(texlive-specs-j:texlive-gfsneohellenic-fonts)
+msgid "Severed fonts for texlive-gfsneohellenic"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsneohellenic-fonts)
+msgid "The separated fonts package for texlive-gfsneohellenic"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsporson)
+msgid "A Greek font, originally from Porson"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfsporson)
+msgid ""
+"Porson is an elegant Greek font, originally cut at the turn of the 19th Century in England. The present version has been provided by the Greek Font Society. The font supports the Greek alphabet only. LaTeX support is provided, using the LGR encoding.\n"
+"\n"
+"date: 2014-05-02 13:05:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfsporson-doc)
#, fuzzy
-msgid "Documentation for texlive-phonetic"
+msgid "Documentation for texlive-gfsporson"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-photo:texlive-photo-doc)
+#. description(texlive-specs-j:texlive-gfsporson-doc)
#, fuzzy
-msgid "Documentation for texlive-photo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfsporson"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-physics:texlive-physics-doc)
-msgid "Documentation for texlive-physics"
+#. summary(texlive-specs-j:texlive-gfsporson-fonts)
+msgid "Severed fonts for texlive-gfsporson"
msgstr ""
-#. summary(texlive-physymb:texlive-physymb-doc)
+#. description(texlive-specs-j:texlive-gfsporson-fonts)
+msgid "The separated fonts package for texlive-gfsporson"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfssolomos)
+msgid "A Greek-alphabet font"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfssolomos)
+msgid ""
+"Solomos is a font which traces its descent from a calligraphically-inspired font of the mid-19th century. LaTeX support, for use with the LGR encoding only, is provided.\n"
+"\n"
+"date: 2014-05-02 13:05:35 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gfssolomos-doc)
#, fuzzy
-msgid "Documentation for texlive-physymb"
+msgid "Documentation for texlive-gfssolomos"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-piano:texlive-piano-doc)
+#. description(texlive-specs-j:texlive-gfssolomos-doc)
#, fuzzy
-msgid "Documentation for texlive-piano"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gfssolomos"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-picinpar:texlive-picinpar-doc)
+#. summary(texlive-specs-j:texlive-gfssolomos-fonts)
+msgid "Severed fonts for texlive-gfssolomos"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gfssolomos-fonts)
+msgid "The separated fonts package for texlive-gfssolomos"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-ghab)
+msgid "Typeset ghab boxes in LaTeX"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-ghab)
+msgid ""
+"The package defines a command \\darghab that will typeset its argument in a box with a decorated frame. The width of the box may be set using an optional argument.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-ghab-doc)
#, fuzzy
-msgid "Documentation for texlive-picinpar"
+msgid "Documentation for texlive-ghab"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pict2e:texlive-pict2e-doc)
+#. description(texlive-specs-j:texlive-ghab-doc)
#, fuzzy
-msgid "Documentation for texlive-pict2e"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ghab"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pictex:texlive-pictex-doc)
+#. summary(texlive-specs-j:texlive-gillcm)
#, fuzzy
-msgid "Documentation for texlive-pictex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Unicode Version of the Computer Modern Fonts"
+msgid "Alternative unslanted italic Computer Modern fonts"
+msgstr "Unicode verze písem Computer Modern"
-#. summary(texlive-piechartmp:texlive-piechartmp-doc)
+#. description(texlive-specs-j:texlive-gillcm)
+msgid ""
+"This is a demonstration of the use of virtual fonts for unusual effects: the package implements an old idea of Eric Gill. The package was written for the author's talk at TUG 2010.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gillcm-doc)
#, fuzzy
#| msgid "Documentation for digiKam"
-msgid "Documentation for texlive-piechartmp"
+msgid "Documentation for texlive-gillcm"
msgstr "Dokumentace pro digiKam"
-#. summary(texlive-piff:texlive-piff-doc)
+#. description(texlive-specs-j:texlive-gillcm-doc)
#, fuzzy
-msgid "Documentation for texlive-piff"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gillcm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pigpen:texlive-pigpen-doc)
-#, fuzzy
-msgid "Documentation for texlive-pigpen"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gillius)
+msgid "Gillius fonts with LaTeX support"
+msgstr ""
-#. summary(texlive-pinlabel:texlive-pinlabel-doc)
-#, fuzzy
-msgid "Documentation for texlive-pinlabel"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gillius)
+msgid ""
+"This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Gillius and Gillius No. 2 families of sans serif fonts and condensed versions of them, designed by Hirwen Harendal. According to the designer, the fonts were inspired by Gill Sans.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-pitex:texlive-pitex-doc)
+#. summary(texlive-specs-j:texlive-gillius-doc)
#, fuzzy
-msgid "Documentation for texlive-pitex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-gillius"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-pittetd:texlive-pittetd-doc)
+#. description(texlive-specs-j:texlive-gillius-doc)
#, fuzzy
-msgid "Documentation for texlive-pittetd"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gillius"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pkfix:texlive-pkfix-doc)
+#. summary(texlive-specs-j:texlive-gillius-fonts)
#, fuzzy
-msgid "Documentation for texlive-pkfix"
-msgstr "Dokumentace pro adaptx"
+msgid "Severed fonts for texlive-gillius"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-pkfix-helper:texlive-pkfix-helper-doc)
+#. description(texlive-specs-j:texlive-gillius-fonts)
#, fuzzy
-msgid "Documentation for texlive-pkfix-helper"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-gillius"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-pkuthss:texlive-pkuthss-doc)
-msgid "Documentation for texlive-pkuthss"
+#. summary(texlive-specs-j:texlive-gincltex)
+msgid "Include TeX files as graphics (.tex support for \\includegraphics)"
msgstr ""
-#. summary(texlive-pl:texlive-pl-doc)
+#. description(texlive-specs-j:texlive-gincltex)
+msgid ""
+"The package builds on the standard LaTeX packages graphics and/or graphicx and allows external LaTeX source files to be included, in the same way as graphic files, by \\includegraphics. In effect, then package adds support for the .tex extension. Some of the lower level operations like clipping and trimming are implemented using the adjustbox package which includes native pdflatex support and uses the pgf package for other output formats.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gincltex-doc)
#, fuzzy
-msgid "Documentation for texlive-pl"
+msgid "Documentation for texlive-gincltex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-placeins:texlive-placeins-doc)
+#. description(texlive-specs-j:texlive-gincltex-doc)
#, fuzzy
-msgid "Documentation for texlive-placeins"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gincltex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-plainpkg:texlive-plainpkg-doc)
-msgid "Documentation for texlive-plainpkg"
+#. summary(texlive-specs-j:texlive-ginpenc)
+msgid "Modification of inputenc for German"
msgstr ""
-#. summary(texlive-plantslabels:texlive-plantslabels-doc)
+#. description(texlive-specs-j:texlive-ginpenc)
+msgid ""
+"If the inputenc is used and German umlauts are input directly, they are converted to the LICR representation \\\"a (etc.). This breaks the sort algorithm of makeindex, for instance. Ginpenc converts umlauts and the sharp-s to the short forms defined by babel, e.g., \"a instead, if the text is typeset in German.\n"
+"\n"
+"date: 2012-04-29 21:41:11 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-ginpenc-doc)
#, fuzzy
-msgid "Documentation for texlive-plantslabels"
+msgid "Documentation for texlive-ginpenc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-plari:texlive-plari-doc)
+#. description(texlive-specs-j:texlive-ginpenc-doc)
#, fuzzy
-msgid "Documentation for texlive-plari"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ginpenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-plates:texlive-plates-doc)
+#. summary(texlive-specs-j:texlive-gitinfo)
+msgid "Access metadata from the git distributed version control system"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gitinfo)
+msgid ""
+"The package makes it possible to incorporate git version control metadata into documents. Note this version is now deprecated, but is kept on the archive, pro tem, for continuity for existing users. For memoir users, the package provides the means to tailor page headers and footers to use the metadata.\n"
+"\n"
+"date: 2014-05-14 22:10:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gitinfo-doc)
#, fuzzy
-msgid "Documentation for texlive-plates"
+msgid "Documentation for texlive-gitinfo"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-play:texlive-play-doc)
+#. description(texlive-specs-j:texlive-gitinfo-doc)
#, fuzzy
-msgid "Documentation for texlive-play"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gitinfo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-plipsum:texlive-plipsum-doc)
-msgid "Documentation for texlive-plipsum"
+#. summary(texlive-specs-j:texlive-gloss)
+msgid "Create glossaries using BibTeX"
msgstr ""
-#. summary(texlive-plnfss:texlive-plnfss-doc)
+#. description(texlive-specs-j:texlive-gloss)
+msgid ""
+"A glossary package using BibTeX with \\cite replaced by \\gloss.\n"
+"\n"
+"date: 2012-04-29 21:41:11 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gloss-doc)
#, fuzzy
-msgid "Documentation for texlive-plnfss"
+msgid "Documentation for texlive-gloss"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-plstmary:texlive-plstmary-doc)
-msgid "Documentation for texlive-plstmary"
+#. description(texlive-specs-j:texlive-gloss-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-gloss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-j:texlive-glossaries)
+msgid "Create glossaries and lists of acronyms"
msgstr ""
-#. summary(texlive-plweb:texlive-plweb-doc)
+#. description(texlive-specs-j:texlive-glossaries)
+msgid ""
+"The glossaries package supports acronyms and multiple glossaries, and has provision for operation in several languages (using the facilities of either babel or polyglossia). New entries are defined to have a name and description (and optionally an associated symbol). Support for multiple languages is offered, and plural forms of terms may be specified. An additional package, glossaries-accsupp, can make use of the accsupp package mechanisms for accessibility support for PDF files containing glossaries. The user may define new glossary styles, and preambles and postambles can be specified. There is provision for loading a database of terms, but only terms used in the text will be added to the relevant glossary. The package uses an indexing program to provide the actual glossary; either makeindex or xindy may serve this purpose, and a Perl script is provided to serve as interface. The package distribution also provides the mfirstuc package, for changing the first letter of a word to
upper case. The package supersedes the author's glossary package (which is now obsolete), and a conversion tool is provided.\n"
+"\n"
+"date: 2014-04-04 12:05:09 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-glossaries-doc)
#, fuzzy
-msgid "Documentation for texlive-plweb"
+msgid "Documentation for texlive-glossaries"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pmgraph:texlive-pmgraph-doc)
+#. description(texlive-specs-j:texlive-glossaries-doc)
#, fuzzy
-msgid "Documentation for texlive-pmgraph"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-glossaries"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pmx:texlive-pmx-doc)
-msgid "Documentation for texlive-pmx"
+#. summary(texlive-specs-j:texlive-glyphlist)
+msgid "Package glyphlist"
+msgstr "Balíček glyphlist"
+
+#. description(texlive-specs-j:texlive-glyphlist)
+msgid "The glyphlist package"
msgstr ""
-#. summary(texlive-poemscol:texlive-poemscol-doc)
+#. summary(texlive-specs-j:texlive-gmdoc)
#, fuzzy
-msgid "Documentation for texlive-poemscol"
+msgid "Documentation of LaTeX packages"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-poetrytex:texlive-poetrytex-doc)
-msgid "Documentation for texlive-poetrytex"
+#. description(texlive-specs-j:texlive-gmdoc)
+msgid ""
+"A LaTeX package and an example class for documenting (La)TeX packages, document classes, .dtx etc., providing hyperlinks. The package is believed to be compatible with doc and permits minimal markup of code (the macrocode environment is no longer necessary). The package provides automatic detection of definitions (detecting such things as \\def, \\newcommand, \\DeclareOption etc.). The package needs hyperref and the author's three ''basic' packages: gmutils, gmverb and gmiflink. As a bonus (and as an example of doc compatibility) driver files are provided that may be used to typeset the LaTeX Base.\n"
+"\n"
+"date: 2012-02-24 10:32:36 +0000"
msgstr ""
-#. summary(texlive-polski:texlive-polski-doc)
+#. summary(texlive-specs-j:texlive-gmdoc-doc)
#, fuzzy
-msgid "Documentation for texlive-polski"
+msgid "Documentation for texlive-gmdoc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-poltawski:texlive-poltawski-doc)
+#. description(texlive-specs-j:texlive-gmdoc-doc)
#, fuzzy
-msgid "Documentation for texlive-poltawski"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmdoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-polyglossia:texlive-polyglossia-doc)
-#, fuzzy
-msgid "Documentation for texlive-polyglossia"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gmdoc-enhance)
+msgid "Some enhancements to the gmdoc package"
+msgstr ""
-#. summary(texlive-polynom:texlive-polynom-doc)
-#, fuzzy
-msgid "Documentation for texlive-polynom"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gmdoc-enhance)
+msgid ""
+"This package provides some enhancements for the gmdoc package: nicer formatting for multiple line inline comments, an ability to \"comment out\" some code, and a macro to input other files in \"normal\" LaTeX mode.\n"
+"\n"
+"date: 2012-02-24 10:32:36 +0000"
+msgstr ""
-#. summary(texlive-polynomial:texlive-polynomial-doc)
+#. summary(texlive-specs-j:texlive-gmdoc-enhance-doc)
#, fuzzy
-msgid "Documentation for texlive-polynomial"
+msgid "Documentation for texlive-gmdoc-enhance"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-polytable:texlive-polytable-doc)
+#. description(texlive-specs-j:texlive-gmdoc-enhance-doc)
#, fuzzy
-msgid "Documentation for texlive-polytable"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmdoc-enhance"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-postcards:texlive-postcards-doc)
-#, fuzzy
-msgid "Documentation for texlive-postcards"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gmiflink)
+msgid "Simplify usage of \\hypertarget and \\hyperlink"
+msgstr ""
-#. summary(texlive-poster-mac:texlive-poster-mac-doc)
-#, fuzzy
-msgid "Documentation for texlive-poster-mac"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gmiflink)
+msgid ""
+"Three hyperref-based macros that simplify usage of \\hypertarget and \\hyperlink: one argument instead of the same one twice. Also \\gmiflink and \\gmifref which typeset plain text instead of generating an error or printing '??' if there is no respective hypertarget or label.\n"
+"\n"
+"date: 2012-05-17 20:49:03 +0000"
+msgstr ""
-#. summary(texlive-powerdot:texlive-powerdot-doc)
+#. summary(texlive-specs-j:texlive-gmiflink-doc)
#, fuzzy
-msgid "Documentation for texlive-powerdot"
+msgid "Documentation for texlive-gmiflink"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-powerdot-FUBerlin:texlive-powerdot-FUBerlin-doc)
+#. description(texlive-specs-j:texlive-gmiflink-doc)
#, fuzzy
-msgid "Documentation for texlive-powerdot-FUBerlin"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmiflink"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ppr-prv:texlive-ppr-prv-doc)
-#, fuzzy
-msgid "Documentation for texlive-ppr-prv"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gmp)
+msgid "Enable integration between MetaPost pictures and LaTeX"
+msgstr ""
-#. summary(texlive-pracjourn:texlive-pracjourn-doc)
-#, fuzzy
-msgid "Documentation for texlive-pracjourn"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-j:texlive-gmp)
+msgid ""
+"The package allows integration between MetaPost pictures and LaTeX. The main feature is that passing parameters to the MetaPost pictures is possible and the picture code can be put inside arguments to commands, including \\newcommand.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-preprint:texlive-preprint-doc)
+#. summary(texlive-specs-j:texlive-gmp-doc)
#, fuzzy
-msgid "Documentation for texlive-preprint"
+msgid "Documentation for texlive-gmp"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-prerex:texlive-prerex-doc)
+#. description(texlive-specs-j:texlive-gmp-doc)
#, fuzzy
-msgid "Documentation for texlive-prerex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-present:texlive-present-doc)
+#. summary(texlive-specs-j:texlive-gmutils)
#, fuzzy
-msgid "Documentation for texlive-present"
-msgstr "Dokumentace pro adaptx"
+msgid "Support macros for other packages"
+msgstr "syslog-ng pomocná databáze - vývojářský balík"
-#. summary(texlive-prettyref:texlive-prettyref-doc)
-#, fuzzy
-msgid "Documentation for texlive-prettyref"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gmutils)
+msgid ""
+"Miscellaneous macros used by others of the author's packages. Contents of the package: \\newgif and other globals; \\@ifnextcat and \\@ifXeTeX; \\(Re)storeMacro(s) to override redefinitions; \\afterfi and friends; commands from relsize, etc.; \"almost an environment\" or redefinition of \\begin (\\begin* doesn't check if the argument environment is defined).\n"
+"\n"
+"date: 2012-03-12 19:11:22 +0000"
+msgstr ""
-#. summary(texlive-preview:texlive-preview-doc)
+#. summary(texlive-specs-j:texlive-gmutils-doc)
#, fuzzy
-msgid "Documentation for texlive-preview"
+msgid "Documentation for texlive-gmutils"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-printlen:texlive-printlen-doc)
+#. description(texlive-specs-j:texlive-gmutils-doc)
#, fuzzy
-msgid "Documentation for texlive-printlen"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmutils"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-proba:texlive-proba-doc)
-#, fuzzy
-msgid "Documentation for texlive-proba"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gmverb)
+msgid "A variant of LaTeX \\verb, verbatim and shortvrb"
+msgstr ""
-#. summary(texlive-probsoln:texlive-probsoln-doc)
+#. description(texlive-specs-j:texlive-gmverb)
+msgid ""
+"A redefinition of \\verb and verbatim so that long lines are breakable before \\ and after { with % as 'hyphen'. Allows you to define your own verbatim-like environments (subject to a size limit) and allows you to declare any single character as a shorthand as in the \\MakeShortVerb command of the shortvrb package of the LaTeX distribution. The package depends on the gmutils package.\n"
+"\n"
+"date: 2011-10-14 14:42:22 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gmverb-doc)
#, fuzzy
-msgid "Documentation for texlive-probsoln"
+msgid "Documentation for texlive-gmverb"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-procIAGssymp:texlive-procIAGssymp-doc)
+#. description(texlive-specs-j:texlive-gmverb-doc)
#, fuzzy
-msgid "Documentation for texlive-procIAGssymp"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmverb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-prodint:texlive-prodint-doc)
+#. summary(texlive-specs-j:texlive-gmverse)
#, fuzzy
-msgid "Documentation for texlive-prodint"
-msgstr "Dokumentace pro adaptx"
+#| msgid "A GNU package for creating portable C++ program"
+msgid "A package for typesetting (short) poems"
+msgstr "GNU balík pro tvorbu přenositelných C++ programů"
-#. summary(texlive-productbox:texlive-productbox-doc)
+#. description(texlive-specs-j:texlive-gmverse)
+msgid ""
+"A redefinition of the verse environment to make the \\\\ command optional for line ends and to give it a possibility of optical centering and `right-hanging' alignment of lines broken because of length.\n"
+"\n"
+"date: 2012-05-17 20:49:03 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gmverse-doc)
#, fuzzy
-msgid "Documentation for texlive-productbox"
+msgid "Documentation for texlive-gmverse"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-program:texlive-program-doc)
+#. description(texlive-specs-j:texlive-gmverse-doc)
#, fuzzy
-msgid "Documentation for texlive-program"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gmverse"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-progress:texlive-progress-doc)
+#. summary(texlive-specs-j:texlive-gnu-freefont)
+msgid "A Unicode font, with rather wide coverage"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gnu-freefont)
#, fuzzy
-msgid "Documentation for texlive-progress"
-msgstr "Dokumentace pro adaptx"
+#| msgid "A set of free outline (OpenType, for example) fonts covering the ISO 10646/Unicode UCS (Universal Character Set). The set consists of three typefaces: one monospaced and two proportional (one with uniform and one with modulated stroke."
+msgid ""
+"The package provides a set of outline (i.e. OpenType) fonts covering as much as possible of the Unicode character set. The set consists of three typefaces: one monospaced and two proportional (one with uniform and one with modulated stroke).\n"
+"\n"
+"date: 2014-05-03 08:31:59 +0000"
+msgstr "Sada volně šiřitelných obrysových fontů (např. OpenType) pokrývajících ISO 10646/Unicode UCS (Universal Character Set). Sada sestává ze tří písem: jednoho neproporcionálního a dvou proporcionálních (jedno s uniformními a jedno s proměnlivými tahy)."
-#. summary(texlive-progressbar:texlive-progressbar-doc)
+#. summary(texlive-specs-j:texlive-gnu-freefont-doc)
#, fuzzy
-msgid "Documentation for texlive-progressbar"
+msgid "Documentation for texlive-gnu-freefont"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-properties:texlive-properties-doc)
+#. description(texlive-specs-j:texlive-gnu-freefont-doc)
#, fuzzy
-msgid "Documentation for texlive-properties"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gnu-freefont"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-proposal:texlive-proposal-doc)
-msgid "Documentation for texlive-proposal"
+#. summary(texlive-specs-j:texlive-gnu-freefont-fonts)
+msgid "Severed fonts for texlive-gnu-freefont"
msgstr ""
-#. summary(texlive-prosper:texlive-prosper-doc)
-#, fuzzy
-msgid "Documentation for texlive-prosper"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gnu-freefont-fonts)
+msgid "The separated fonts package for texlive-gnu-freefont"
+msgstr ""
-#. summary(texlive-protex:texlive-protex-doc)
-#, fuzzy
-msgid "Documentation for texlive-protex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gnuplottex)
+msgid "Embed Gnuplot commands in LaTeX documents"
+msgstr ""
-#. summary(texlive-protocol:texlive-protocol-doc)
-#, fuzzy
-msgid "Documentation for texlive-protocol"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gnuplottex)
+msgid ""
+"The package extracts Gnuplot code from the document and writes it to .gnuplot files. If shell escape is enabled, the graph files are automatically processed and converted to PostScript or PDF files, which will then be included. If shell escape is disabled, the user has to run the files through gnuplot, and re-run the LaTeX job.\n"
+"\n"
+"date: 2013-11-29 09:11:23 +0000"
+msgstr ""
-#. summary(texlive-przechlewski-book:texlive-przechlewski-book-doc)
+#. summary(texlive-specs-j:texlive-gnuplottex-doc)
#, fuzzy
-msgid "Documentation for texlive-przechlewski-book"
+msgid "Documentation for texlive-gnuplottex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-psbao:texlive-psbao-doc)
+#. description(texlive-specs-j:texlive-gnuplottex-doc)
#, fuzzy
-msgid "Documentation for texlive-psbao"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gnuplottex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pseudocode:texlive-pseudocode-doc)
-#, fuzzy
-msgid "Documentation for texlive-pseudocode"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-go)
+msgid "Fonts and macros for typesetting go games"
+msgstr ""
-#. summary(texlive-psfrag:texlive-psfrag-doc)
-#, fuzzy
-msgid "Documentation for texlive-psfrag"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-go)
+msgid ""
+"The macros provide for nothing more complicated than the standard 19x19 board; the fonts are written in Metafont.\n"
+"\n"
+"date: 2014-05-03 08:31:59 +0000"
+msgstr ""
-#. summary(texlive-psfragx:texlive-psfragx-doc)
+#. summary(texlive-specs-j:texlive-go-doc)
#, fuzzy
-msgid "Documentation for texlive-psfragx"
+msgid "Documentation for texlive-go"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-psgo:texlive-psgo-doc)
+#. description(texlive-specs-j:texlive-go-doc)
#, fuzzy
-msgid "Documentation for texlive-psgo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-go"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-psizzl:texlive-psizzl-doc)
-#, fuzzy
-msgid "Documentation for texlive-psizzl"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-gost)
+msgid "BibTeX styles to format according to GOST"
+msgstr ""
-#. summary(texlive-psnfss:texlive-psnfss-doc)
-#, fuzzy
-msgid "Documentation for texlive-psnfss"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gost)
+msgid ""
+"BibTeX styles to format bibliographies in English, Russian or Ukrainian according to GOST 7.0.5-2008 or GOST 7.1-2003. Both 8-bit and Unicode (UTF-8) versions of each BibTeX style, in each case offering a choice of sorted and unsorted. Further, a set of three styles (which do not conform to current standards) are retained for backwards compatibility.\n"
+"\n"
+"date: 2012-09-10 11:53:05 +0000"
+msgstr ""
-#. summary(texlive-pspicture:texlive-pspicture-doc)
+#. summary(texlive-specs-j:texlive-gost-doc)
#, fuzzy
-msgid "Documentation for texlive-pspicture"
+msgid "Documentation for texlive-gost"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-2dplot:texlive-pst-2dplot-doc)
+#. description(texlive-specs-j:texlive-gost-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-2dplot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gost"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-3d:texlive-pst-3d-doc)
+#. summary(texlive-specs-j:texlive-gothic)
#, fuzzy
-msgid "Documentation for texlive-pst-3d"
-msgstr "Dokumentace pro adaptx"
+#| msgid "A collection of free Persian OpenType fonts."
+msgid "A collection of old German-style fonts"
+msgstr "Sbírka svobodných perských písem OpenType."
-#. summary(texlive-pst-3dplot:texlive-pst-3dplot-doc)
+#. description(texlive-specs-j:texlive-gothic)
+msgid ""
+"A collection of fonts that reproduce those used in \"old German\" printing and handwriting. The set comprises Gothic, Schwabacher and Fraktur fonts, a pair of handwriting fonts, Sutterlin and Schwell, and a font containing decorative initials. In addition, there are two re-encoding packages for Haralambous's fonts, providing T1, using virtual fonts, and OT1 and T1, using Metafont.\n"
+"\n"
+"date: 2014-05-03 12:16:52 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gothic-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-3dplot"
+msgid "Documentation for texlive-gothic"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-abspos:texlive-pst-abspos-doc)
+#. description(texlive-specs-j:texlive-gothic-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-abspos"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gothic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-am:texlive-pst-am-doc)
+#. summary(texlive-specs-j:texlive-gothic-fonts)
+msgid "Severed fonts for texlive-gothic"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gothic-fonts)
+msgid "The separated fonts package for texlive-gothic"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gradientframe)
+msgid "Simple gradient frames around objects"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gradientframe)
+msgid ""
+"The package provides a means of drawing graded frames around objects. The gradients of the frames are drawn using the color package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gradientframe-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-am"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-gradientframe"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-pst-asr:texlive-pst-asr-doc)
+#. description(texlive-specs-j:texlive-gradientframe-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-asr"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gradientframe"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-bar:texlive-pst-bar-doc)
+#. summary(texlive-specs-j:texlive-grafcet)
+msgid "Draw Grafcet/SFC with TikZ"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-grafcet)
+msgid ""
+"The package provides a library (GRAFCET) that can draw Grafcet Sequential Function Chart (SFC) diagrams, in accordance with EN 60848, using Pgf/TikZ. L'objectif de la librairie GRAFCET est de permettre le trace de grafcet selon la norme EN 60848 a partir de Pgf/TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-grafcet-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-bar"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-grafcet"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-barcode:texlive-pst-barcode-doc)
+#. description(texlive-specs-j:texlive-grafcet-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-barcode"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-grafcet"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-bezier:texlive-pst-bezier-doc)
+#. summary(texlive-specs-j:texlive-graphics)
+msgid "Standard LaTeX graphics"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-graphics)
+msgid ""
+"The package was designed to accommodate all needs for inclusion of graphics in LaTeX documents, replacing many earlier packages used in LaTeX 2.09. The package aims to give a consistent interface to including the file types that are understood in your output, by use of 'printer drivers' (now known, simply, as 'drivers'). The distribtion of the package contains several drivers, but others (for example, pdfTeX) are distributed separately. The package also offers several means of manipulating graphics in the course of inserting them into a document (for example, rotation and scaling). For extended documentation see epslatex. The package is part of the graphics bundle, which is one of the collections in the LaTeX 'required' set of packages.\n"
+"\n"
+"date: 2013-01-29 14:35:44 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-graphics-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-bezier"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-graphics"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-blur:texlive-pst-blur-doc)
+#. description(texlive-specs-j:texlive-graphics-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-blur"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-graphics"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-bspline:texlive-pst-bspline-doc)
+#. summary(texlive-specs-j:texlive-graphics-pln)
+msgid "LaTeX-style graphics for Plain TeX users"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-graphics-pln)
+msgid ""
+"The Plain TeX graphics package is mostly a thin shell around the LaTeX graphicx and color packages, with support of the LaTeX-isms in those packages provided by miniltx (which is the largest part of the bundle). The bundle also contains a file \"picture.tex\", which is a wrapper around the autopict.sty, and provides the LaTeX picture mode to Plain TeX users.\n"
+"\n"
+"date: 2013-01-29 14:35:44 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-graphics-pln-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-bspline"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-graphics-pln"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-calendar:texlive-pst-calendar-doc)
+#. description(texlive-specs-j:texlive-graphics-pln-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-calendar"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-graphics-pln"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-circ:texlive-pst-circ-doc)
+#. summary(texlive-specs-j:texlive-graphicx-psmin)
+msgid "Reduce size of PostScript files by not repeating images"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-graphicx-psmin)
+msgid ""
+"The package is an extension of the standard graphics bundle and provides a way to include repeated PostScript graphics (ps, eps) only once in a PostScript document. This leads to smaller PostScript documents when having, for instance, a logo on every page. The package only works when post-processed with dvips, which should eb version 5.95b or later. The difference for a resulting distilled PDF file is minimal (as Ghostscript and Adobe Distiller only include a single copy of each graphics file, anyway).\n"
+"\n"
+"date: 2013-01-29 14:35:44 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-graphicx-psmin-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-circ"
-msgstr "Dokumentace pro castor"
+msgid "Documentation for texlive-graphicx-psmin"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-coil:texlive-pst-coil-doc)
+#. description(texlive-specs-j:texlive-graphicx-psmin-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-coil"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-graphicx-psmin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-cox:texlive-pst-cox-doc)
+#. summary(texlive-specs-j:texlive-graphicxbox)
+msgid "Insert a graphical image as a background"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-graphicxbox)
+msgid ""
+"The package defines two new commands \\graphicxbox and \\fgraphicxbox, which are companions to \\colorbox and \\fcolorbox of the Standard LaTeX color package. The \\graphicxbox command inserts a graphical image as a background rather than a background color, while \\fgraphicxbox does the same thing, but also draws a colored frame around the box.\n"
+"\n"
+"date: 2014-01-15 11:43:52 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-graphicxbox-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-cox"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-graphicxbox"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-dbicons:texlive-pst-dbicons-doc)
+#. description(texlive-specs-j:texlive-graphicxbox-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-dbicons"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-graphicxbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-diffraction:texlive-pst-diffraction-doc)
+#. summary(texlive-specs-j:texlive-graphviz)
#, fuzzy
-msgid "Documentation for texlive-pst-diffraction"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Write graphviz (dot+neato) inline in LaTeX documents"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
-#. summary(texlive-pst-electricfield:texlive-pst-electricfield-doc)
+#. description(texlive-specs-j:texlive-graphviz)
+msgid ""
+"The package allows inline use of graphviz code, in a LaTeX document.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-graphviz-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-electricfield"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-graphviz"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-eps:texlive-pst-eps-doc)
+#. description(texlive-specs-j:texlive-graphviz-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-eps"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-graphviz"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-eucl:texlive-pst-eucl-doc)
+#. summary(texlive-specs-j:texlive-greek-fontenc)
#, fuzzy
-msgid "Documentation for texlive-pst-eucl"
-msgstr "Dokumentace pro adaptx"
+msgid "LICR macros and encoding definition files for Greek"
+msgstr "Změněné konfigurační soubory pro %s:"
-#. summary(texlive-pst-exa:texlive-pst-exa-doc)
+#. description(texlive-specs-j:texlive-greek-fontenc)
+msgid ""
+"The package provides Greek LICR macro definitions and encoding definition files for Greek text font encodings for use with fontenc.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-greek-fontenc-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-exa"
+msgid "Documentation for texlive-greek-fontenc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-fill:texlive-pst-fill-doc)
+#. description(texlive-specs-j:texlive-greek-fontenc-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-fill"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-greek-fontenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-fit:texlive-pst-fit-doc)
-msgid "Documentation for texlive-pst-fit"
+#. summary(texlive-specs-j:texlive-greek-inputenc)
+msgid "Greek encoding support for inputenc"
msgstr ""
-#. summary(texlive-pst-fr3d:texlive-pst-fr3d-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-fr3d"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-greek-inputenc)
+msgid ""
+"The bundle provides UTF-8, Macintosh Greek encoding and ISO 8859-7 definition files for use with inputenc.\n"
+"\n"
+"date: 2013-09-13 15:09:45 +0000"
+msgstr ""
-#. summary(texlive-pst-fractal:texlive-pst-fractal-doc)
+#. summary(texlive-specs-j:texlive-greek-inputenc-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-fractal"
+msgid "Documentation for texlive-greek-inputenc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-fun:texlive-pst-fun-doc)
+#. description(texlive-specs-j:texlive-greek-inputenc-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-fun"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-greek-inputenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-func:texlive-pst-func-doc)
+#. summary(texlive-specs-j:texlive-greekdates)
+msgid "Provides ancient Greek day and month names, dates, etcetera"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-greekdates)
+msgid ""
+"The package provides easy access to ancient Greek names of days and months of various regions of Greece. In case the historical information about a region is not complete, we use the Athenian name of the month. Moreover commands and options are provided, in order to completely switch to the \"ancient way\", commands such as \\today.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-greekdates-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-func"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-greekdates"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-gantt:texlive-pst-gantt-doc)
+#. description(texlive-specs-j:texlive-greekdates-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-gantt"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-greekdates"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-geo:texlive-pst-geo-doc)
+#. summary(texlive-specs-j:texlive-greektex)
+msgid "Fonts for typesetting Greek/English documents"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-greektex)
+msgid ""
+"The fonts are based on Silvio Levy's classical Greek fonts; macros and Greek hyphenation patterns for the fonts' encoding are also provided.\n"
+"\n"
+"date: 2014-05-03 12:44:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-greektex-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-geo"
+msgid "Documentation for texlive-greektex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-ghsb:texlive-pst-ghsb-doc)
+#. description(texlive-specs-j:texlive-greektex-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-ghsb"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-greektex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-gr3d:texlive-pst-gr3d-doc)
+#. summary(texlive-specs-j:texlive-greenpoint)
+msgid "The Green Point logo"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-greenpoint)
+msgid ""
+"A Metafont-implementation of the logo commonly known as 'Der Grune Punkt' ('The Green Point'). In Austria, it can be found on nearly every bottle. It should not be confused with the 'Recycle'-logo, implemented by Ian Green.\n"
+"\n"
+"date: 2014-05-03 12:44:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-greenpoint-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-gr3d"
+msgid "Documentation for texlive-greenpoint"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-grad:texlive-pst-grad-doc)
+#. description(texlive-specs-j:texlive-greenpoint-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-grad"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-greenpoint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-graphicx:texlive-pst-graphicx-doc)
+#. summary(texlive-specs-j:texlive-grfpaste)
+msgid "Include fragments of a dvi file"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-grfpaste)
+msgid ""
+"Provides a mechanism to include fragments of dvi files with the graphicx package, so that you can use \\includegraphics to include dvi files. The package requires the dvipaste program.\n"
+"\n"
+"date: 2013-01-29 15:15:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-grfpaste-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-graphicx"
+msgid "Documentation for texlive-grfpaste"
msgstr "Dokumentace pro gawk"
-#. summary(texlive-pst-infixplot:texlive-pst-infixplot-doc)
+#. description(texlive-specs-j:texlive-grfpaste-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-infixplot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-grfpaste"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-jtree:texlive-pst-jtree-doc)
+#. summary(texlive-specs-j:texlive-grid)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-pst-jtree"
-msgstr "Dokumentace pro castor"
+#| msgid "Typesetting XML with TeX"
+msgid "Grid typesetting in LaTeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. summary(texlive-pst-knot:texlive-pst-knot-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-knot"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-grid)
+msgid ""
+"The package helps to enables grid typesetting in double column documents. Grid typesetting (vertical aligning of lines of text in adjacent columns) is a difficult task in LaTeX, and the present package is no more than an attempt to help users to achieve it in a limited way. An example document, grid.tex, is provided with simple instructions to typeset it using the package. The package needs a lot more work: this is only a beginning...\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-pst-labo:texlive-pst-labo-doc)
+#. summary(texlive-specs-j:texlive-grid-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-labo"
+msgid "Documentation for texlive-grid"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-layout:texlive-pst-layout-doc)
+#. description(texlive-specs-j:texlive-grid-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-layout"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-grid"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-lens:texlive-pst-lens-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-lens"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-grid-system)
+msgid "Page organisation, modelled on CSS facilities"
+msgstr ""
-#. summary(texlive-pst-light3d:texlive-pst-light3d-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-light3d"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-grid-system)
+msgid ""
+"The package provides the means for LaTeX to implement a grid system as known from CSS grid systems. The facility is useful for creating box layouts as used in brochures.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-pst-magneticfield:texlive-pst-magneticfield-doc)
+#. summary(texlive-specs-j:texlive-grid-system-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-magneticfield"
+msgid "Documentation for texlive-grid-system"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-math:texlive-pst-math-doc)
+#. description(texlive-specs-j:texlive-grid-system-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-math"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-grid-system"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-mirror:texlive-pst-mirror-doc)
+#. summary(texlive-specs-j:texlive-gridset)
+msgid "Grid, a.k.a. in-register, setting"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gridset)
+msgid ""
+"Grid setting -- also known as strict in-register setting -- is something, that should be done for a lot of documents but is not easy using LaTeX. The package helps to get the information needed for grid setting. It does not implement auto grid setting, but there is a command \\vskipnextgrid, that moves to the next grid position. This may be enough under some circumstances, but in other circumstances it may fail. Thus gridset is only one more step for grid setting, not a complete solution.\n"
+"\n"
+"date: 2012-07-13 10:20:40 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gridset-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-pst-mirror"
+msgid "Documentation for texlive-gridset"
msgstr "Dokumentace pro castor"
-#. summary(texlive-pst-node:texlive-pst-node-doc)
+#. description(texlive-specs-j:texlive-gridset-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-node"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gridset"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-ob3d:texlive-pst-ob3d-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-ob3d"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-grotesq)
+msgid "URW Grotesq font pack for LaTeX"
+msgstr ""
-#. summary(texlive-pst-ode:texlive-pst-ode-doc)
-msgid "Documentation for texlive-pst-ode"
+#. description(texlive-specs-j:texlive-grotesq)
+msgid ""
+"The directory contains a copy of the Type 1 font \"URW Grotesq 2031 Bold' released under the GPL by URW, with supporting files for use with (La)TeX.\n"
+"\n"
+"date: 2012-12-07 17:46:56 +0000"
msgstr ""
-#. summary(texlive-pst-optexp:texlive-pst-optexp-doc)
+#. summary(texlive-specs-j:texlive-grotesq-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-optexp"
+msgid "Documentation for texlive-grotesq"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-optic:texlive-pst-optic-doc)
+#. description(texlive-specs-j:texlive-grotesq-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-optic"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-grotesq"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-osci:texlive-pst-osci-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-osci"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-grotesq-fonts)
+msgid "Severed fonts for texlive-grotesq"
+msgstr ""
-#. summary(texlive-pst-pad:texlive-pst-pad-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-pad"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-grotesq-fonts)
+msgid "The separated fonts package for texlive-grotesq"
+msgstr ""
-#. summary(texlive-pst-pdf:texlive-pst-pdf-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-pdf"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-grundgesetze)
+msgid "Typeset Frege's Grundgesetze der Arithmetik"
+msgstr ""
-#. summary(texlive-pst-pdgr:texlive-pst-pdgr-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-pdgr"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-grundgesetze)
+msgid ""
+"The package defines maths mode commands for typesetting Gottlob Frege's concept-script in the style of his \"Grundgesetze der Arithmetik\" (Basic Laws of Arithmetic).\n"
+"\n"
+"date: 2014-04-08 09:20:21 +0000"
+msgstr ""
-#. summary(texlive-pst-platon:texlive-pst-platon-doc)
+#. summary(texlive-specs-j:texlive-grundgesetze-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-platon"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-grundgesetze"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-pst-plot:texlive-pst-plot-doc)
+#. description(texlive-specs-j:texlive-grundgesetze-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-plot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-grundgesetze"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-poly:texlive-pst-poly-doc)
+#. summary(texlive-specs-j:texlive-gsftopk)
+msgid "Convert \"ghostscript fonts\" to PK files"
+msgstr ""
+
+#. description(texlive-specs-j:texlive-gsftopk)
+msgid ""
+"Designed for use with xdvi and dvips this utility converts Adobe Type 1 fonts to PK bitmap format. It should not ordinarily be much used nowadays, since both its target applications are now capable of dealing with Type 1 fonts, direct.\n"
+"\n"
+"date: 2012-07-13 10:47:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gsftopk-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-poly"
+msgid "Documentation for texlive-gsftopk"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-pulley:texlive-pst-pulley-doc)
+#. description(texlive-specs-j:texlive-gsftopk-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-pulley"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-gsftopk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-qtree:texlive-pst-qtree-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-qtree"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-j:texlive-gtl)
+msgid "Manipulating generalized token lists"
+msgstr ""
-#. summary(texlive-pst-rubans:texlive-pst-rubans-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-rubans"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-gtl)
+msgid ""
+"The package provides tools for simple operations on lists of tokens which are not necessarily balanced. It is in particular used a lot in the unravel package, to go through tokens one at a time rather than having to work with entire braced groups at a time. The package requires an up-to-date l3kernel bundle.\n"
+"\n"
+"date: 2013-08-23 15:44:33 +0000"
+msgstr ""
-#. summary(texlive-pst-sigsys:texlive-pst-sigsys-doc)
+#. summary(texlive-specs-j:texlive-gtl-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-sigsys"
+msgid "Documentation for texlive-gtl"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-slpe:texlive-pst-slpe-doc)
+#. description(texlive-specs-j:texlive-gtl-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-slpe"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gtl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-solarsystem:texlive-pst-solarsystem-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-solarsystem"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+#. summary(texlive-specs-j:texlive-gtrcrd)
+msgid "Add chords to lyrics"
+msgstr ""
-#. summary(texlive-pst-solides3d:texlive-pst-solides3d-doc)
+#. description(texlive-specs-j:texlive-gtrcrd)
+msgid ""
+"The package provides the means to specify guitar chords to be played with each part of the lyrics of a song. The syntax of the macros reduces the chance of failing to provide a chord where one is needed, and the structure of the macros ensures that the chord specification appears immediately above the start of the lyric.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-gtrcrd-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-solides3d"
+msgid "Documentation for texlive-gtrcrd"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-soroban:texlive-pst-soroban-doc)
+#. description(texlive-specs-j:texlive-gtrcrd-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-pst-soroban"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-gtrcrd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-spectra:texlive-pst-spectra-doc)
-#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-pst-spectra"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-j:texlive-gu)
+msgid "Typeset crystallographic group-subgroup-schemes"
+msgstr ""
-#. summary(texlive-pst-stru:texlive-pst-stru-doc)
-#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-pst-stru"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-j:texlive-gu)
+msgid ""
+"The package simplifies typesetting of simple crystallographic group-subgroup-schemes in the Barnighausen formalism. It defines a new environment stammbaum, wherein all elements of the scheme are defined. Afterwards all necessary dimensions are calculated and the scheme is drawn. Currently two steps of symmetry reduction are supported.\n"
+"\n"
+"date: 2012-07-13 11:47:30 +0000"
+msgstr ""
-#. summary(texlive-pst-text:texlive-pst-text-doc)
+#. summary(texlive-specs-j:texlive-gu-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-text"
+msgid "Documentation for texlive-gu"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-thick:texlive-pst-thick-doc)
+#. description(texlive-specs-j:texlive-gu-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-thick"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gu"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-tools:texlive-pst-tools-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst-tools"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-guide-to-latex)
+msgid "Package guide-to-latex"
+msgstr "Balíček guide-to-latex"
-#. summary(texlive-pst-tree:texlive-pst-tree-doc)
+#. description(texlive-specs-j:texlive-guide-to-latex)
+msgid "The guide-to-latex package"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-guitar)
+msgid "Guitar chords and song texts"
+msgstr "Kytarové akordy a texty písní"
+
+#. description(texlive-specs-j:texlive-guitar)
+msgid ""
+"(La)TeX macros for typesetting guitar chords over song texts. The toolbox package is required. Note that this package only places arbitrary TeX code over the lyrics. To typeset the chords graphically (and not only by name), the author recommends use of an additional package such as gchords by K. Peeters.\n"
+"\n"
+"date: 2013-11-27 00:09:36 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-guitar-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-pst-tree"
-msgstr "Dokumentace pro castor"
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-guitar"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-pst-tvz:texlive-pst-tvz-doc)
+#. description(texlive-specs-j:texlive-guitar-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-tvz"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-guitar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-uml:texlive-pst-uml-doc)
+#. summary(texlive-specs-j:texlive-guitarchordschemes)
#, fuzzy
-msgid "Documentation for texlive-pst-uml"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Guitar chords and song texts"
+msgid "Guitar Chord and Scale Tablatures"
+msgstr "Kytarové akordy a texty písní"
-#. summary(texlive-pst-vectorian:texlive-pst-vectorian-doc)
-msgid "Documentation for texlive-pst-vectorian"
+#. description(texlive-specs-j:texlive-guitarchordschemes)
+msgid ""
+"This package provides two commands (\\chordscheme and \\scales). With those commands it is possible to draw schematic diagrams of guitar chord tablatures and scale tablatures. Both commands know a range of options that allow wide customization of the output. The package's drawing is done with the help of TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pst-vowel:texlive-pst-vowel-doc)
+#. summary(texlive-specs-j:texlive-guitarchordschemes-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-vowel"
+msgid "Documentation for texlive-guitarchordschemes"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-vue3d:texlive-pst-vue3d-doc)
+#. description(texlive-specs-j:texlive-guitarchordschemes-doc)
#, fuzzy
-msgid "Documentation for texlive-pst-vue3d"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-guitarchordschemes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst2pdf:texlive-pst2pdf-doc)
-#, fuzzy
-msgid "Documentation for texlive-pst2pdf"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-guitlogo)
+msgid "Macros for typesetting the GuIT logo"
+msgstr ""
-#. summary(texlive-pstool:texlive-pstool-doc)
+#. description(texlive-specs-j:texlive-guitlogo)
+msgid ""
+"Guit provides some commands useful to correctly write the logo of GUIT -- \"Gruppo Utilizzatori Italiani di TeX\" (Italian TeX User Group), using the default document color or any other color the user may ever choose, in conformity with logo's scheme as seen on the Group web site (http://www.guit.sssup.it). Likewise, commands are provided that simplify the writing of GuIT acronym's complete expansion, of the addresses of Group's internet site and public forum and 'GuITmeeting' logo. Optionally, using hyperref, the outputs of the above cited commands can become hyperlinks to Group's site. Documentation is available in Italian, only.\n"
+"\n"
+"date: 2012-08-19 08:36:46 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-guitlogo-doc)
#, fuzzy
-msgid "Documentation for texlive-pstool"
+msgid "Documentation for texlive-guitlogo"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pstools:texlive-pstools-doc)
+#. description(texlive-specs-j:texlive-guitlogo-doc)
#, fuzzy
-msgid "Documentation for texlive-pstools"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-guitlogo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pstricks:texlive-pstricks-doc)
+#. summary(texlive-specs-j:texlive-gustlib)
#, fuzzy
-msgid "Documentation for texlive-pstricks"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Package gustprog"
+msgid "Package gustlib"
+msgstr "Balíček gustprog"
-#. summary(texlive-pstricks-add:texlive-pstricks-add-doc)
+#. description(texlive-specs-j:texlive-gustlib)
#, fuzzy
-msgid "Documentation for texlive-pstricks-add"
-msgstr "Dokumentace pro adaptx"
+msgid "The gustlib package"
+msgstr "Aktualizovat balíky"
-#. summary(texlive-psu-thesis:texlive-psu-thesis-doc)
+#. summary(texlive-specs-j:texlive-gustlib-doc)
#, fuzzy
-msgid "Documentation for texlive-psu-thesis"
+msgid "Documentation for texlive-gustlib"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ptex:texlive-ptex-doc)
+#. description(texlive-specs-j:texlive-gustlib-doc)
#, fuzzy
-msgid "Documentation for texlive-ptex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-gustlib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ptex2pdf:texlive-ptex2pdf-doc)
-msgid "Documentation for texlive-ptex2pdf"
+#. summary(texlive-specs-j:texlive-gustprog)
+msgid "Package gustprog"
+msgstr "Balíček gustprog"
+
+#. description(texlive-specs-j:texlive-gustprog)
+msgid "The gustprog package"
msgstr ""
-#. summary(texlive-ptext:texlive-ptext-doc)
-msgid "Documentation for texlive-ptext"
+#. summary(texlive-specs-j:texlive-hacm)
+#, fuzzy
+#| msgid "Fonts for the Khmer language of Cambodia"
+msgid "Font support for the Arka language"
+msgstr "Písma pro Khmérštinu"
+
+#. description(texlive-specs-j:texlive-hacm)
+msgid ""
+"The package supports typesetting hacm, the alphabet of the constructed language Arka. The bundle provides nine official fonts, in Adobe Type 1 format.\n"
+"\n"
+"date: 2014-05-03 12:44:16 +0000"
msgstr ""
-#. summary(texlive-ptptex:texlive-ptptex-doc)
+#. summary(texlive-specs-j:texlive-hacm-doc)
#, fuzzy
-msgid "Documentation for texlive-ptptex"
+msgid "Documentation for texlive-hacm"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-punk:texlive-punk-doc)
-msgid "Documentation for texlive-punk"
+#. description(texlive-specs-j:texlive-hacm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-hacm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-j:texlive-hacm-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-hacm"
+msgstr "Vývojářský balík pro libstroke"
+
+#. description(texlive-specs-j:texlive-hacm-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-hacm"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-j:texlive-handout)
+msgid "Create handout for auditors of a talk"
msgstr ""
-#. summary(texlive-punk-latex:texlive-punk-latex-doc)
-msgid "Documentation for texlive-punk-latex"
+#. description(texlive-specs-j:texlive-handout)
+msgid ""
+"In some fields of scholarship, a beamer does not offer good support when giving a talk in a proceeding. For example, in classical philology, the main sources are text, and it will be better to distribute a handout to the audience with extracts of the texts about which we will talk. The package supports preparation of such handouts when writing the talk.\n"
+"\n"
+"date: 2014-03-28 17:05:25 +0000"
msgstr ""
-#. summary(texlive-punknova:texlive-punknova-doc)
+#. summary(texlive-specs-j:texlive-handout-doc)
#, fuzzy
-msgid "Documentation for texlive-punknova"
+msgid "Documentation for texlive-handout"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-purifyeps:texlive-purifyeps-doc)
+#. description(texlive-specs-j:texlive-handout-doc)
#, fuzzy
-msgid "Documentation for texlive-purifyeps"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-handout"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pxbase:texlive-pxbase-doc)
-msgid "Documentation for texlive-pxbase"
+#. summary(texlive-specs-j:texlive-hands)
+msgid "Pointing hand font"
msgstr ""
-#. summary(texlive-pxchfon:texlive-pxchfon-doc)
-msgid "Documentation for texlive-pxchfon"
+#. description(texlive-specs-j:texlive-hands)
+msgid ""
+"Provides right- and left-pointing hands in both black-on-white and white-on-black realisation. The font is distributed as Metafont source.\n"
+"\n"
+"date: 2014-05-06 18:53:54 +0000"
msgstr ""
-#. summary(texlive-pxcjkcat:texlive-pxcjkcat-doc)
-msgid "Documentation for texlive-pxcjkcat"
+#. summary(texlive-specs-j:texlive-hanging)
+msgid "Hanging paragraphs"
msgstr ""
-#. summary(texlive-pxfonts:texlive-pxfonts-doc)
+#. description(texlive-specs-j:texlive-hanging)
+msgid ""
+"The hanging package facilitates the typesetting of hanging paragraphs. The package also enables typesetting with hanging punctuation, by making punctuation characters active. This facility is best suppressed (it can interfere with other packages) -- there are package options for suppressing each individual punctuation character. 'Real' attempts at hanging punction should nowadays use the microtype package, which takes advantage of the support offered in recent versions of pdfTeX.\n"
+"\n"
+"date: 2013-09-30 12:43:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-hanging-doc)
#, fuzzy
-msgid "Documentation for texlive-pxfonts"
+msgid "Documentation for texlive-hanging"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pxgreeks:texlive-pxgreeks-doc)
+#. description(texlive-specs-j:texlive-hanging-doc)
#, fuzzy
-msgid "Documentation for texlive-pxgreeks"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hanging"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pxjahyper:texlive-pxjahyper-doc)
-msgid "Documentation for texlive-pxjahyper"
+#. summary(texlive-specs-j:texlive-hanoi)
+msgid "Tower of Hanoi in TeX"
msgstr ""
-#. summary(texlive-pxpgfmark:texlive-pxpgfmark-doc)
-msgid "Documentation for texlive-pxpgfmark"
+#. description(texlive-specs-j:texlive-hanoi)
+msgid ""
+"The Plain TeX program (typed in the shape of the towers of Hanoi) serves both as a game and as a TeX programming exercise. As a game it will solve the towers with (up to) 15 discs (with 15 discs, 32767 moves are needed).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pxrubrica:texlive-pxrubrica-doc)
-msgid "Documentation for texlive-pxrubrica"
+#. summary(texlive-specs-j:texlive-happy4th)
+msgid "A firework display in obfuscated TeX"
msgstr ""
-#. summary(texlive-pxtxalfa:texlive-pxtxalfa-doc)
-#, fuzzy
-msgid "Documentation for texlive-pxtxalfa"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-happy4th)
+msgid ""
+"The output PDF file gives an amusing display, as the reader pages through it.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-python:texlive-python-doc)
-msgid "Documentation for texlive-python"
+#. summary(texlive-specs-j:texlive-har2nat)
+msgid "Replace the harvard package with natbib"
msgstr ""
-#. summary(texlive-qcm:texlive-qcm-doc)
-#, fuzzy
-msgid "Documentation for texlive-qcm"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-har2nat)
+msgid ""
+"This small package allows a LaTeX document containing the citation commands provided by the Harvard package to be compiled using the natbib package. Migration from harvard to natbib thus can be achieved simply by replacing \\usepackage{harvard} with \\usepackage{natbib} \\usepackage{har2nat} It is important that har2nat be loaded after natbib, since it modifies natbib commands.\n"
+"\n"
+"date: 2012-04-15 20:35:03 +0000"
+msgstr ""
-#. summary(texlive-qobitree:texlive-qobitree-doc)
+#. summary(texlive-specs-j:texlive-har2nat-doc)
#, fuzzy
-msgid "Documentation for texlive-qobitree"
+msgid "Documentation for texlive-har2nat"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-qpxqtx:texlive-qpxqtx-doc)
+#. description(texlive-specs-j:texlive-har2nat-doc)
#, fuzzy
-msgid "Documentation for texlive-qpxqtx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-har2nat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-qstest:texlive-qstest-doc)
-#, fuzzy
-msgid "Documentation for texlive-qstest"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-j:texlive-hardwrap)
+msgid "Hard wrap text to a certain character length"
+msgstr ""
-#. summary(texlive-qsymbols:texlive-qsymbols-doc)
+#. description(texlive-specs-j:texlive-hardwrap)
+msgid ""
+"The package facilitates wrapping text to a specific character width, breaking lines by words rather than, as done by TeX, by characters. The primary use for these facilities is to aid the generation of messages sent to the log file or console output to display messages to the user. Package authors may also find this useful when writing out arbitary text to an external file.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-hardwrap-doc)
#, fuzzy
-msgid "Documentation for texlive-qsymbols"
+msgid "Documentation for texlive-hardwrap"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-qtree:texlive-qtree-doc)
+#. description(texlive-specs-j:texlive-hardwrap-doc)
#, fuzzy
-msgid "Documentation for texlive-qtree"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hardwrap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-quattrocento:texlive-quattrocento-doc)
-msgid "Documentation for texlive-quattrocento"
+#. summary(texlive-specs-j:texlive-harmony)
+msgid "Typeset harmony symbols, etc., for musicology"
msgstr ""
-#. summary(texlive-quotchap:texlive-quotchap-doc)
-#, fuzzy
-msgid "Documentation for texlive-quotchap"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-harmony)
+msgid ""
+"The package harmony.sty uses the packages ifthen and amssymb from the amsfonts bundle, together with the LaTeX font lcirclew10 and the font musix13 from musixtex.\n"
+"\n"
+"date: 2011-10-24 20:33:28 +0000"
+msgstr ""
-#. summary(texlive-quoting:texlive-quoting-doc)
+#. summary(texlive-specs-j:texlive-harmony-doc)
#, fuzzy
-msgid "Documentation for texlive-quoting"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-harmony"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-quotmark:texlive-quotmark-doc)
+#. description(texlive-specs-j:texlive-harmony-doc)
#, fuzzy
-msgid "Documentation for texlive-quotmark"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-harmony"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-r_und_s:texlive-r_und_s-doc)
-#, fuzzy
-msgid "Documentation for texlive-r_und_s"
-msgstr "Dokumentace pro adaptx"
-
-#. summary(texlive-raleway:texlive-raleway-doc)
-msgid "Documentation for texlive-raleway"
+#. summary(texlive-specs-j:texlive-harnon-cv)
+msgid "A CV document class with a vertical timeline for experience"
msgstr ""
-#. summary(texlive-ran_toks:texlive-ran_toks-doc)
-msgid "Documentation for texlive-ran_toks"
+#. description(texlive-specs-j:texlive-harnon-cv)
+msgid ""
+"The class offers another modern, neat, design, and provides a simple means of adding an 'experience timeline'.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-randbild:texlive-randbild-doc)
+#. summary(texlive-specs-j:texlive-harnon-cv-doc)
#, fuzzy
-msgid "Documentation for texlive-randbild"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-harnon-cv"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-randomwalk:texlive-randomwalk-doc)
+#. description(texlive-specs-j:texlive-harnon-cv-doc)
#, fuzzy
-msgid "Documentation for texlive-randomwalk"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-harnon-cv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-randtext:texlive-randtext-doc)
+#. summary(texlive-specs-j:texlive-harpoon)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-randtext"
-msgstr "Dokumentace pro adaptx"
+msgid "Extra harpoons, using the graphics package"
+msgstr "Aktualizovat balíky"
-#. summary(texlive-rccol:texlive-rccol-doc)
-#, fuzzy
-msgid "Documentation for texlive-rccol"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-j:texlive-harpoon)
+msgid ""
+"Provides over- and under-harpoon symbol commands; the harpoons may point in either direction, with the hook pointing up or down. The covered object is provided as an argument to the commands, so that they have the look of accent commands.\n"
+"\n"
+"date: 2012-04-15 20:35:03 +0000"
+msgstr ""
-#. summary(texlive-rcs:texlive-rcs-doc)
+#. summary(texlive-specs-j:texlive-harpoon-doc)
#, fuzzy
-msgid "Documentation for texlive-rcs"
-msgstr "Dokumentace pro adaptx"
-
-#. summary(texlive-rcs-multi:texlive-rcs-multi-doc)
-#, fuzzy
-msgid "Documentation for texlive-rcs-multi"
+msgid "Documentation for texlive-harpoon"
msgstr "Dokumentace pro castor"
-#. summary(texlive-rcsinfo:texlive-rcsinfo-doc)
+#. description(texlive-specs-j:texlive-harpoon-doc)
#, fuzzy
-msgid "Documentation for texlive-rcsinfo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-harpoon"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-readarray:texlive-readarray-doc)
-msgid "Documentation for texlive-readarray"
+#. summary(texlive-specs-j:texlive-harvard)
+msgid "Harvard citation package for use with LaTeX 2e"
msgstr ""
-#. summary(texlive-realboxes:texlive-realboxes-doc)
+#. description(texlive-specs-j:texlive-harvard)
+msgid ""
+"This is a re-implementation, for LaTeX 2e, of the original Harvard package. The bundle contains the LaTeX package, several BibTeX styles, and a 'Perl package' for use with LaTeX2HTML. Harvard is an author-year citation style (all but the first author are suppressed in second and subsequent citations of the same entry); the package defines several variant styles: apsr.bst for the American Political Science Review; agsm.bst for Australian Government publications; dcu.bst from the Design Computing Unit of the University of Sydney; kluwer.bstwhich aims at the format preferred in Kluwer publications; nederlands.bst which deals with sorting Dutch names with prefixes (such as van) according to Dutch rules, together with several styles whose authors offer no description of their behaviour.\n"
+"\n"
+"date: 2013-12-27 10:50:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-j:texlive-harvard-doc)
#, fuzzy
-msgid "Documentation for texlive-realboxes"
+msgid "Documentation for texlive-harvard"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-realscripts:texlive-realscripts-doc)
+#. description(texlive-specs-j:texlive-harvard-doc)
#, fuzzy
-msgid "Documentation for texlive-realscripts"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-harvard"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rec-thy:texlive-rec-thy-doc)
-#, fuzzy
-msgid "Documentation for texlive-rec-thy"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-harveyballs)
+msgid "Create Harvey Balls using TikZ"
+msgstr ""
-#. summary(texlive-recipe:texlive-recipe-doc)
-#, fuzzy
-msgid "Documentation for texlive-recipe"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-harveyballs)
+msgid ""
+"The package provides 5 commands (giving symbols that indicate values from \"none\" to \"full\").\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-recipecard:texlive-recipecard-doc)
+#. summary(texlive-specs-k:texlive-harveyballs-doc)
#, fuzzy
-msgid "Documentation for texlive-recipecard"
+msgid "Documentation for texlive-harveyballs"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rectopma:texlive-rectopma-doc)
+#. description(texlive-specs-k:texlive-harveyballs-doc)
#, fuzzy
-msgid "Documentation for texlive-rectopma"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-harveyballs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-recycle:texlive-recycle-doc)
-#, fuzzy
-msgid "Documentation for texlive-recycle"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-k:texlive-harvmac)
+msgid "Macros for scientific articles"
+msgstr ""
-#. summary(texlive-refcheck:texlive-refcheck-doc)
-#, fuzzy
-msgid "Documentation for texlive-refcheck"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-harvmac)
+msgid ""
+"Known as 'Harvard macros', since written at that University.\n"
+"\n"
+"date: 2012-11-14 10:10:16 +0000"
+msgstr ""
-#. summary(texlive-refman:texlive-refman-doc)
+#. summary(texlive-specs-k:texlive-harvmac-doc)
#, fuzzy
-msgid "Documentation for texlive-refman"
+msgid "Documentation for texlive-harvmac"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-refstyle:texlive-refstyle-doc)
+#. description(texlive-specs-k:texlive-harvmac-doc)
#, fuzzy
-msgid "Documentation for texlive-refstyle"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-harvmac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-regcount:texlive-regcount-doc)
+#. summary(texlive-specs-k:texlive-hatching)
+msgid "MetaPost macros for hatching interior of closed paths"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hatching)
+msgid ""
+"The file hatching.mp contains a set of MetaPost macros for hatching interior of closed paths. Examples of usage are included.\n"
+"\n"
+"date: 2012-04-15 20:35:03 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hatching-doc)
#, fuzzy
-msgid "Documentation for texlive-regcount"
+msgid "Documentation for texlive-hatching"
msgstr "Dokumentace pro castor"
-#. summary(texlive-regexpatch:texlive-regexpatch-doc)
+#. description(texlive-specs-k:texlive-hatching-doc)
#, fuzzy
-msgid "Documentation for texlive-regexpatch"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hatching"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-register:texlive-register-doc)
-#, fuzzy
-msgid "Documentation for texlive-register"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-k:texlive-hausarbeit-jura)
+msgid "Class for writing \"juristiche Hausarbeiten\" at German Universities"
+msgstr ""
-#. summary(texlive-regstats:texlive-regstats-doc)
+#. description(texlive-specs-k:texlive-hausarbeit-jura)
+msgid ""
+"The class was developed for use by students writing legal essays (\"juristische Hausarbeit\") at German Universities. It is based on jurabook and jurabib and makes it easy for LaTeX beginners to get a correct and nicely formatted paper.\n"
+"\n"
+"date: 2014-05-13 21:14:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hausarbeit-jura-doc)
#, fuzzy
-msgid "Documentation for texlive-regstats"
-msgstr "Dokumentace pro castor"
+msgid "Documentation for texlive-hausarbeit-jura"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-relenc:texlive-relenc-doc)
+#. description(texlive-specs-k:texlive-hausarbeit-jura-doc)
#, fuzzy
-msgid "Documentation for texlive-relenc"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-hausarbeit-jura"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-relsize:texlive-relsize-doc)
+#. summary(texlive-specs-k:texlive-hc)
#, fuzzy
-msgid "Documentation for texlive-relsize"
-msgstr "Dokumentace pro castor"
+#| msgid "Replacement for the crypt Command"
+msgid "Replacement for the LaTeX classes"
+msgstr "Náhrada za příkaz crypt"
-#. summary(texlive-reotex:texlive-reotex-doc)
+#. description(texlive-specs-k:texlive-hc)
+msgid ""
+"A set of replacements for the default LaTeX classes, based upon the Koma-Script bundle and the seminar class. Includes hcart, hcreport, hcletter, and hcslides.\n"
+"\n"
+"date: 2012-04-15 20:35:03 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hc-doc)
#, fuzzy
-msgid "Documentation for texlive-reotex"
+msgid "Documentation for texlive-hc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-repeatindex:texlive-repeatindex-doc)
+#. description(texlive-specs-k:texlive-hc-doc)
#, fuzzy
-msgid "Documentation for texlive-repeatindex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-resphilosophica:texlive-resphilosophica-doc)
-msgid "Documentation for texlive-resphilosophica"
+#. summary(texlive-specs-k:texlive-he-she)
+msgid "Alternating pronouns to aid gender-neutral writing"
msgstr ""
-#. summary(texlive-resumecls:texlive-resumecls-doc)
-msgid "Documentation for texlive-resumecls"
+#. description(texlive-specs-k:texlive-he-she)
+msgid ""
+"The package implements a version of semi-automatic pronoun switching for writing gender-neutral (and possibly annoying) prose. It has upper- and lowercase versions of switching pronouns for all case forms, plus anaphoric versions that reflect the current gender choice.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-resumemac:texlive-resumemac-doc)
+#. summary(texlive-specs-k:texlive-he-she-doc)
#, fuzzy
-msgid "Documentation for texlive-resumemac"
+msgid "Documentation for texlive-he-she"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-revtex:texlive-revtex-doc)
+#. description(texlive-specs-k:texlive-he-she-doc)
#, fuzzy
-msgid "Documentation for texlive-revtex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-he-she"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-revtex4:texlive-revtex4-doc)
-#, fuzzy
-msgid "Documentation for texlive-revtex4"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-helvetic-fonts)
+msgid "Severed fonts for texlive-helvetic"
+msgstr ""
-#. summary(texlive-rjlparshap:texlive-rjlparshap-doc)
-#, fuzzy
-msgid "Documentation for texlive-rjlparshap"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-k:texlive-helvetic-fonts)
+msgid "The separated fonts package for texlive-helvetic"
+msgstr ""
-#. summary(texlive-rlepsf:texlive-rlepsf-doc)
-#, fuzzy
-msgid "Documentation for texlive-rlepsf"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hep)
+msgid "A \"convenience wrapper\" for High Energy Physics packages"
+msgstr ""
-#. summary(texlive-rmpage:texlive-rmpage-doc)
-#, fuzzy
-msgid "Documentation for texlive-rmpage"
-msgstr "HTML dokumentace pro GNU C Library"
+#. description(texlive-specs-k:texlive-hep)
+msgid ""
+"Loads the author's hepunits and hepnicenames packages, and a selection of others that are useful in High Energy Physics papers, etc.\n"
+"\n"
+"date: 2011-11-16 23:18:18 +0000"
+msgstr ""
-#. summary(texlive-robustcommand:texlive-robustcommand-doc)
+#. summary(texlive-specs-k:texlive-hep-doc)
#, fuzzy
-msgid "Documentation for texlive-robustcommand"
+msgid "Documentation for texlive-hep"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-robustindex:texlive-robustindex-doc)
+#. description(texlive-specs-k:texlive-hep-doc)
#, fuzzy
-msgid "Documentation for texlive-robustindex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hep"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-romanbar:texlive-romanbar-doc)
-#, fuzzy
-msgid "Documentation for texlive-romanbar"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hepnames)
+msgid "Pre-defined high energy particle names"
+msgstr ""
-#. summary(texlive-romande:texlive-romande-doc)
-#, fuzzy
-msgid "Documentation for texlive-romande"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hepnames)
+msgid ""
+"Hepnames provides a pair of LaTeX packages, heppennames and hepnicenames, providing a large set of pre-defined high energy physics particle names built with the hepparticles package. The packages are based on pennames.sty by Michel Goosens and Eric van Herwijnen. Heppennames re-implements the particle names in pennames.sty, with some additions and alterations and greater flexibility and robustness due to the hepparticles structures, which were written for this purpose. Hepnicenames provides the main non-resonant particle names from heppennames with more \"friendly\" names.\n"
+"\n"
+"date: 2013-10-07 16:28:42 +0000"
+msgstr ""
-#. summary(texlive-romanneg:texlive-romanneg-doc)
+#. summary(texlive-specs-k:texlive-hepnames-doc)
#, fuzzy
-msgid "Documentation for texlive-romanneg"
+msgid "Documentation for texlive-hepnames"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-romannum:texlive-romannum-doc)
+#. description(texlive-specs-k:texlive-hepnames-doc)
#, fuzzy
-msgid "Documentation for texlive-romannum"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hepnames"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rotating:texlive-rotating-doc)
-#, fuzzy
-msgid "Documentation for texlive-rotating"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hepparticles)
+msgid "Macros for typesetting high energy physics particle names"
+msgstr ""
-#. summary(texlive-rotfloat:texlive-rotfloat-doc)
-#, fuzzy
-msgid "Documentation for texlive-rotfloat"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hepparticles)
+msgid ""
+"HEPparticles is a set of macros for typesetting high energy particle names, to meet the following criteria: 1. The main particle name is a Roman or Greek symbol, to be typeset in upright font in normal contexts. 2. Additionally a superscript and/or subscript may follow the main symbol. 3. Particle resonances may also have a resonance specifier which is typeset in parentheses following the main symbol. In general the parentheses may also be followed by sub- and superscripts. 4. The particle names are expected to be used both in and out of mathematical contexts. 5. If the surrounding text is bold or italic then the particle name should adapt to that context as best as possible (this may not be possible for Greek symbols). A consequence of point 5 is that the well-known problems with boldness of particle names in section titles, headers and tables of contents automatically disappear if these macros are used.\n"
+"\n"
+"date: 2011-11-16 19:25:41 +0000"
+msgstr ""
-#. summary(texlive-rotpages:texlive-rotpages-doc)
+#. summary(texlive-specs-k:texlive-hepparticles-doc)
#, fuzzy
-msgid "Documentation for texlive-rotpages"
+msgid "Documentation for texlive-hepparticles"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-roundbox:texlive-roundbox-doc)
+#. description(texlive-specs-k:texlive-hepparticles-doc)
#, fuzzy
-msgid "Documentation for texlive-roundbox"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hepparticles"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rrgtrees:texlive-rrgtrees-doc)
-msgid "Documentation for texlive-rrgtrees"
+#. summary(texlive-specs-k:texlive-hepthesis)
+msgid "A class for academic reports, especially PhD theses"
msgstr ""
-#. summary(texlive-rsc:texlive-rsc-doc)
-#, fuzzy
-msgid "Documentation for texlive-rsc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hepthesis)
+msgid ""
+"Hepthesis is a LaTeX class for typesetting large academic reports, in particular PhD theses. It was originally developed for typesetting the author's high-energy physics PhD thesis and includes some features specifically tailored to such an application. In particular, hepthesis offers: Attractive semantic environments for various rubric sections; Extensive options for draft production, screen viewing and binding-ready output; Helpful extensions of existing environments, including equation and tabular; and Support for quotations at the start of the thesis and each chapter. The class is based on scrbook, from the KOMA-Script bundle.\n"
+"\n"
+"date: 2013-12-27 10:50:48 +0000"
+msgstr ""
-#. summary(texlive-rsfs:texlive-rsfs-doc)
+#. summary(texlive-specs-k:texlive-hepthesis-doc)
#, fuzzy
-msgid "Documentation for texlive-rsfs"
+msgid "Documentation for texlive-hepthesis"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rsfso:texlive-rsfso-doc)
+#. description(texlive-specs-k:texlive-hepthesis-doc)
#, fuzzy
-msgid "Documentation for texlive-rsfso"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hepthesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rterface:texlive-rterface-doc)
-msgid "Documentation for texlive-rterface"
+#. summary(texlive-specs-k:texlive-hepunits)
+msgid "A set of units useful in high energy physics applications"
msgstr ""
-#. summary(texlive-rtkinenc:texlive-rtkinenc-doc)
+#. description(texlive-specs-k:texlive-hepunits)
+msgid ""
+"Hepunits is a LaTeX package built on the SIunits package which adds a collection of useful HEP units to the existing SIunits set. These include the energy units \\MeV, \\GeV, \\TeV and the derived momentum and mass units \\MeVoverc, \\MeVovercsq and so on.\n"
+"\n"
+"date: 2011-11-16 19:25:41 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hepunits-doc)
#, fuzzy
-msgid "Documentation for texlive-rtkinenc"
+msgid "Documentation for texlive-hepunits"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rtklage:texlive-rtklage-doc)
+#. description(texlive-specs-k:texlive-hepunits-doc)
#, fuzzy
-msgid "Documentation for texlive-rtklage"
-msgstr "HTML dokumentace pro GNU C Library"
+msgid "This package includes the documentation for texlive-hepunits"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-russ:texlive-russ-doc)
-#, fuzzy
-msgid "Documentation for texlive-russ"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-here)
+msgid "Emulation of obsolete package for \"here\" floats"
+msgstr ""
-#. summary(texlive-rviewport:texlive-rviewport-doc)
+#. description(texlive-specs-k:texlive-here)
+msgid ""
+"Provides the H option for floats in LaTeX to signify that the environemt is not really a float (and should therefore be placed \"here\" and not float at all). The package emulates an older package of the same name, which has long been suppressed by its author. The job is done by nothing more than loading the float package, which has long provided the option in an acceptable framework.\n"
+"\n"
+"date: 2012-07-13 11:47:30 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-here-doc)
#, fuzzy
-msgid "Documentation for texlive-rviewport"
+msgid "Documentation for texlive-here"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rvwrite:texlive-rvwrite-doc)
+#. description(texlive-specs-k:texlive-here-doc)
#, fuzzy
-msgid "Documentation for texlive-rvwrite"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-here"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ryethesis:texlive-ryethesis-doc)
-#, fuzzy
-msgid "Documentation for texlive-ryethesis"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-heuristica)
+msgid "Fonts extending Utopia, with LaTeX support files"
+msgstr ""
-#. summary(texlive-sa-tikz:texlive-sa-tikz-doc)
-msgid "Documentation for texlive-sa-tikz"
+#. description(texlive-specs-k:texlive-heuristica)
+msgid ""
+"The fonts extend the utopia set with Cyrillic glyphs, additional figure styles, ligatures and Small Caps in Regular style only. Macro support, and maths fonts that match the Utopia family, are provided by the Fourier and the Mathdesign font packages.\n"
+"\n"
+"date: 2014-05-18 16:31:37 +0000"
msgstr ""
-#. summary(texlive-sageep:texlive-sageep-doc)
+#. summary(texlive-specs-k:texlive-heuristica-doc)
#, fuzzy
-msgid "Documentation for texlive-sageep"
+msgid "Documentation for texlive-heuristica"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sanskrit:texlive-sanskrit-doc)
+#. description(texlive-specs-k:texlive-heuristica-doc)
#, fuzzy
-msgid "Documentation for texlive-sanskrit"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-heuristica"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sansmath:texlive-sansmath-doc)
+#. summary(texlive-specs-k:texlive-heuristica-fonts)
#, fuzzy
-msgid "Documentation for texlive-sansmath"
-msgstr "Dokumentace pro castor"
+msgid "Severed fonts for texlive-heuristica"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-sansmathaccent:texlive-sansmathaccent-doc)
+#. description(texlive-specs-k:texlive-heuristica-fonts)
#, fuzzy
-msgid "Documentation for texlive-sansmathaccent"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-heuristica"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-sansmathfonts:texlive-sansmathfonts-doc)
-msgid "Documentation for texlive-sansmathfonts"
+#. summary(texlive-specs-k:texlive-hexgame)
+msgid "Provide an environment to draw a hexgame-board"
msgstr ""
-#. summary(texlive-sapthesis:texlive-sapthesis-doc)
-#, fuzzy
-msgid "Documentation for texlive-sapthesis"
-msgstr "Dokumentace pro gawk"
+#. description(texlive-specs-k:texlive-hexgame)
+msgid ""
+"Hex is a mathematical game invented by the Danish mathematician Piet Hein and independently by the mathematician John Nash. This package defines an environment that enables the user to draw such a game in a trivial way.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-sasnrdisplay:texlive-sasnrdisplay-doc)
+#. summary(texlive-specs-k:texlive-hexgame-doc)
#, fuzzy
-msgid "Documentation for texlive-sasnrdisplay"
+msgid "Documentation for texlive-hexgame"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sauerj:texlive-sauerj-doc)
+#. description(texlive-specs-k:texlive-hexgame-doc)
#, fuzzy
-msgid "Documentation for texlive-sauerj"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hexgame"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sauterfonts:texlive-sauterfonts-doc)
-#, fuzzy
-msgid "Documentation for texlive-sauterfonts"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hf-tikz)
+msgid "A simple way to highlight formulas and formula parts"
+msgstr ""
-#. summary(texlive-savefnmark:texlive-savefnmark-doc)
+#. description(texlive-specs-k:texlive-hf-tikz)
+msgid ""
+"The package provides a way to highlight formulas and formula parts in both documents and presentations, us TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hf-tikz-doc)
#, fuzzy
-msgid "Documentation for texlive-savefnmark"
+msgid "Documentation for texlive-hf-tikz"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-savetrees:texlive-savetrees-doc)
+#. description(texlive-specs-k:texlive-hf-tikz-doc)
#, fuzzy
-msgid "Documentation for texlive-savetrees"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hf-tikz"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-scale:texlive-scale-doc)
+#. summary(texlive-specs-k:texlive-hfbright)
+msgid "The hfbright fonts"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hfbright)
+msgid ""
+"These are Adobe Type 1 versions of the OT1-encoded and maths parts of the Computer Modern Bright fonts.\n"
+"\n"
+"date: 2014-05-06 18:53:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hfbright-doc)
#, fuzzy
-msgid "Documentation for texlive-scale"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-hfbright"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-scalebar:texlive-scalebar-doc)
+#. description(texlive-specs-k:texlive-hfbright-doc)
#, fuzzy
-msgid "Documentation for texlive-scalebar"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hfbright"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-scalerel:texlive-scalerel-doc)
-msgid "Documentation for texlive-scalerel"
+#. summary(texlive-specs-k:texlive-hfbright-fonts)
+msgid "Severed fonts for texlive-hfbright"
msgstr ""
-#. summary(texlive-schemabloc:texlive-schemabloc-doc)
-#, fuzzy
-msgid "Documentation for texlive-schemabloc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hfbright-fonts)
+msgid "The separated fonts package for texlive-hfbright"
+msgstr ""
-#. summary(texlive-schemata:texlive-schemata-doc)
-msgid "Documentation for texlive-schemata"
+#. summary(texlive-specs-k:texlive-hfoldsty)
+msgid "Old style numerals with EC fonts"
msgstr ""
-#. summary(texlive-schulschriften:texlive-schulschriften-doc)
-msgid "Documentation for texlive-schulschriften"
+#. description(texlive-specs-k:texlive-hfoldsty)
+msgid ""
+"The hfoldsty package provides virtual fonts for using oldstyle (0123456789) figures with the European Computer Modern fonts. It does a similar job as the eco package by Sebastian Kirsch but includes a couple of improvements, i.e., better kerning with guillemets, and support for character protruding using the pdfcprot package.\n"
+"\n"
+"date: 2014-05-06 18:53:54 +0000"
msgstr ""
-#. summary(texlive-schwalbe-chess:texlive-schwalbe-chess-doc)
+#. summary(texlive-specs-k:texlive-hfoldsty-doc)
#, fuzzy
-msgid "Documentation for texlive-schwalbe-chess"
+msgid "Documentation for texlive-hfoldsty"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sciposter:texlive-sciposter-doc)
+#. description(texlive-specs-k:texlive-hfoldsty-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-sciposter"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-hfoldsty"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-screenplay:texlive-screenplay-doc)
-#, fuzzy
-msgid "Documentation for texlive-screenplay"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-k:texlive-hhtensor)
+msgid "Print vectors, matrices, and tensors"
+msgstr ""
-#. summary(texlive-scrjrnl:texlive-scrjrnl-doc)
-msgid "Documentation for texlive-scrjrnl"
+#. description(texlive-specs-k:texlive-hhtensor)
+msgid ""
+"This package provides commands for vectors, matrices, and tensors with different styles -- arrows (as the LaTeX default), underlined, and bold).\n"
+"\n"
+"date: 2012-07-15 20:58:12 +0000"
msgstr ""
-#. summary(texlive-sdrt:texlive-sdrt-doc)
+#. summary(texlive-specs-k:texlive-hhtensor-doc)
#, fuzzy
-msgid "Documentation for texlive-sdrt"
+msgid "Documentation for texlive-hhtensor"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-secdot:texlive-secdot-doc)
+#. description(texlive-specs-k:texlive-hhtensor-doc)
#, fuzzy
-msgid "Documentation for texlive-secdot"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hhtensor"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-section:texlive-section-doc)
-#, fuzzy
-msgid "Documentation for texlive-section"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-histogr)
+msgid "Draw histograms with the LaTeX picture environment"
+msgstr ""
-#. summary(texlive-sectionbox:texlive-sectionbox-doc)
-#, fuzzy
-msgid "Documentation for texlive-sectionbox"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-histogr)
+msgid ""
+"This is a collection pf macros to draw histogram bars inside a LaTeX picture-environment.\n"
+"\n"
+"date: 2012-07-15 21:35:06 +0000"
+msgstr ""
-#. summary(texlive-sectsty:texlive-sectsty-doc)
+#. summary(texlive-specs-k:texlive-histogr-doc)
#, fuzzy
#| msgid "Documentation for castor"
-msgid "Documentation for texlive-sectsty"
+msgid "Documentation for texlive-histogr"
msgstr "Dokumentace pro castor"
-#. summary(texlive-selectp:texlive-selectp-doc)
+#. description(texlive-specs-k:texlive-histogr-doc)
#, fuzzy
-msgid "Documentation for texlive-selectp"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-histogr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-selnolig:texlive-selnolig-doc)
-msgid "Documentation for texlive-selnolig"
+#. summary(texlive-specs-k:texlive-historische-zeitschrift)
+msgid "Biblatex style for the journal 'Historische Zeitschrift'"
msgstr ""
-#. summary(texlive-semantic:texlive-semantic-doc)
-#, fuzzy
-msgid "Documentation for texlive-semantic"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-historische-zeitschrift)
+msgid ""
+"The package provides citations according with the house style of the 'Historische Zeitschrift', a German historical journal. The scheme is a fullcite for the first citation and 'Author, Shorttitle (as note N, P)' for later citations (P being the page number). For further details, see the description of the house style at the journal's site. The package depends on biblatex (version 0.8 or higher) as well as etoolbox (version 1.5 or higher).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-semaphor:texlive-semaphor-doc)
+#. summary(texlive-specs-k:texlive-historische-zeitschrift-doc)
#, fuzzy
-msgid "Documentation for texlive-semaphor"
+msgid "Documentation for texlive-historische-zeitschrift"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-seminar:texlive-seminar-doc)
+#. description(texlive-specs-k:texlive-historische-zeitschrift-doc)
#, fuzzy
-msgid "Documentation for texlive-seminar"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-historische-zeitschrift"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-semioneside:texlive-semioneside-doc)
+#. summary(texlive-specs-k:texlive-hitec)
#, fuzzy
-msgid "Documentation for texlive-semioneside"
-msgstr "Dokumentace pro adaptx"
+msgid "Class for documentation"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. summary(texlive-sepfootnotes:texlive-sepfootnotes-doc)
+#. description(texlive-specs-k:texlive-hitec)
+msgid ""
+"An article-based class designed for use for documentation in high-technology companies.\n"
+"\n"
+"date: 2012-07-15 21:35:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hitec-doc)
#, fuzzy
-msgid "Documentation for texlive-sepfootnotes"
+msgid "Documentation for texlive-hitec"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sepnum:texlive-sepnum-doc)
+#. description(texlive-specs-k:texlive-hitec-doc)
#, fuzzy
-msgid "Documentation for texlive-sepnum"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hitec"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-seqsplit:texlive-seqsplit-doc)
+#. summary(texlive-specs-k:texlive-hletter)
+msgid "Flexible letter typesetting with flexible page headings"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hletter)
+msgid ""
+"The package permits the user to specify easily, with the aid of self defined key-words, letters (with a logo and private) and headings. The heading may include a footer and the letter provides commands to include a scanned signature and two signees. The package works with the merge package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hletter-doc)
#, fuzzy
-msgid "Documentation for texlive-seqsplit"
+msgid "Documentation for texlive-hletter"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-serbian-apostrophe:texlive-serbian-apostrophe-doc)
+#. description(texlive-specs-k:texlive-hletter-doc)
#, fuzzy
-msgid "Documentation for texlive-serbian-apostrophe"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hletter"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-serbian-date-lat:texlive-serbian-date-lat-doc)
+#. summary(texlive-specs-k:texlive-hobby)
#, fuzzy
-msgid "Documentation for texlive-serbian-date-lat"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Free Implementation of BiDi Algorithm"
+msgid "An implementation of Hobby's algorithm for PGF/TikZ"
+msgstr "Volná implementace Unicode BiDi algoritmu"
-#. summary(texlive-serbian-def-cyr:texlive-serbian-def-cyr-doc)
+#. description(texlive-specs-k:texlive-hobby)
+msgid ""
+"This package defines a path generation function for PGF/TikZ which implements Hobby's algorithm for a path built out of Bezier curves which passes through a given set of points. The path thus generated may by used as a TikZ 'to path'. The implementation is in LaTeX3.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hobby-doc)
#, fuzzy
-msgid "Documentation for texlive-serbian-def-cyr"
+msgid "Documentation for texlive-hobby"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-serbian-lig:texlive-serbian-lig-doc)
+#. description(texlive-specs-k:texlive-hobby-doc)
#, fuzzy
-msgid "Documentation for texlive-serbian-lig"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hobby"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-setdeck:texlive-setdeck-doc)
-msgid "Documentation for texlive-setdeck"
+#. summary(texlive-specs-k:texlive-hobete)
+msgid "Unofficial beamer theme for the University of Hohenheim"
msgstr ""
-#. summary(texlive-setspace:texlive-setspace-doc)
-#, fuzzy
-msgid "Documentation for texlive-setspace"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hobete)
+msgid ""
+"The package provides a beamer theme which features the Ci colors of the University of Hohenheim. Please note that this is not an official Theme, and that there will be no support for it, from the University. Furthermore there is NO relationship between the University and this theme.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-seuthesis:texlive-seuthesis-doc)
+#. summary(texlive-specs-k:texlive-hobete-doc)
#, fuzzy
-msgid "Documentation for texlive-seuthesis"
+msgid "Documentation for texlive-hobete"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sf298:texlive-sf298-doc)
+#. description(texlive-specs-k:texlive-hobete-doc)
#, fuzzy
-msgid "Documentation for texlive-sf298"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hobete"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sffms:texlive-sffms-doc)
+#. summary(texlive-specs-k:texlive-horoscop)
#, fuzzy
-msgid "Documentation for texlive-sffms"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Generate astrological charts in LaTeX"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
-#. summary(texlive-sfg:texlive-sfg-doc)
+#. description(texlive-specs-k:texlive-horoscop)
+msgid ""
+"The horoscop package provides a unified interface for astrological font packages; typesetting with pict2e of standard wheel charts and some variations, in PostScript- and PDF- generating TeX engines; and access to external calculation software (Astrolog and Swiss Ephemeris) for computing object positions.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-horoscop-doc)
#, fuzzy
-msgid "Documentation for texlive-sfg"
+msgid "Documentation for texlive-horoscop"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sgame:texlive-sgame-doc)
+#. description(texlive-specs-k:texlive-horoscop-doc)
#, fuzzy
-#| msgid "Documentation for digiKam"
-msgid "Documentation for texlive-sgame"
-msgstr "Dokumentace pro digiKam"
+msgid "This package includes the documentation for texlive-horoscop"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-shade:texlive-shade-doc)
-#, fuzzy
-msgid "Documentation for texlive-shade"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hpsdiss)
+msgid "A dissertation class"
+msgstr ""
-#. summary(texlive-shadethm:texlive-shadethm-doc)
+#. description(texlive-specs-k:texlive-hpsdiss)
+msgid ""
+"The class was developed to typeset a dissertation at ETH Zurich. The requirements were to use A5 paper and 10pt type. A sample of the output is shown in the PDF documentation link.\n"
+"\n"
+"date: 2012-07-15 21:55:51 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hpsdiss-doc)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-shadethm"
+msgid "Documentation for texlive-hpsdiss"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-shadow:texlive-shadow-doc)
+#. description(texlive-specs-k:texlive-hpsdiss-doc)
#, fuzzy
-msgid "Documentation for texlive-shadow"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hpsdiss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-shadowtext:texlive-shadowtext-doc)
+#. summary(texlive-specs-k:texlive-hrefhide)
+msgid "Suppress hyper links when printing"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hrefhide)
+msgid ""
+"This package provides the command \\hrefdisplayonly (which provides a substitute for \\href). While the (hyperlinked) text appears like an ordinary \\href in the compiled PDF file, the same text will be \"hidden\" when printing the text. (Hiding is actually achieved by making the text the same colour as the background, thus preserving the layout of the rest of the text.)\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hrefhide-doc)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation for texlive-shadowtext"
+msgid "Documentation for texlive-hrefhide"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-shapepar:texlive-shapepar-doc)
+#. description(texlive-specs-k:texlive-hrefhide-doc)
#, fuzzy
-msgid "Documentation for texlive-shapepar"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hrefhide"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-shipunov:texlive-shipunov-doc)
+#. summary(texlive-specs-k:texlive-hrlatex)
#, fuzzy
-msgid "Documentation for texlive-shipunov"
-msgstr "Dokumentace pro adaptx"
+msgid "LaTeX support for Croatian documents"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. summary(texlive-shorttoc:texlive-shorttoc-doc)
+#. description(texlive-specs-k:texlive-hrlatex)
+msgid ""
+"This package simplifies creation of new documents for the (average) Croatian user. As an example, a class file hrdipl.cls (designed for the graduation thesis at the University of Zagreb) and sample thesis documents are included.\n"
+"\n"
+"date: 2012-07-15 21:55:51 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hrlatex-doc)
#, fuzzy
-msgid "Documentation for texlive-shorttoc"
+msgid "Documentation for texlive-hrlatex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-show2e:texlive-show2e-doc)
+#. description(texlive-specs-k:texlive-hrlatex-doc)
#, fuzzy
-msgid "Documentation for texlive-show2e"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hrlatex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-showcharinbox:texlive-showcharinbox-doc)
-msgid "Documentation for texlive-showcharinbox"
+#. summary(texlive-specs-k:texlive-hvfloat)
+msgid "Rotating caption and object of floats independently"
msgstr ""
-#. summary(texlive-showdim:texlive-showdim-doc)
-msgid "Documentation for texlive-showdim"
+#. description(texlive-specs-k:texlive-hvfloat)
+msgid ""
+"This package defines a macro to place objects (tables and figures) and their captions in different positions with different rotating angles within a float. All objects and captions can be framed. The main command is \\hvFloat{float type}{floating object}{caption}{label}; a simple example is \\hvFloat{figure}{\\includegraphics{rose}}{Caption}{fig:0}. Options are provided to place captions to the right or left, and rotated. Setting nonFloat=true results in placing the float here.\n"
+"\n"
+"date: 2012-03-05 12:21:26 +0000"
msgstr ""
-#. summary(texlive-showexpl:texlive-showexpl-doc)
+#. summary(texlive-specs-k:texlive-hvfloat-doc)
#, fuzzy
-msgid "Documentation for texlive-showexpl"
+msgid "Documentation for texlive-hvfloat"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-showhyphens:texlive-showhyphens-doc)
+#. description(texlive-specs-k:texlive-hvfloat-doc)
#, fuzzy
-msgid "Documentation for texlive-showhyphens"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hvfloat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-showlabels:texlive-showlabels-doc)
+#. summary(texlive-specs-k:texlive-hvindex)
#, fuzzy
-msgid "Documentation for texlive-showlabels"
-msgstr "Dokumentace pro adaptx"
+msgid "Support for indexing"
+msgstr "XML podpora pro castor"
-#. summary(texlive-showtags:texlive-showtags-doc)
-#, fuzzy
-msgid "Documentation for texlive-showtags"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hvindex)
+msgid ""
+"The package simplifies the indexing of words using the \\index command of makeidx. With the package, to index a word in a text, you only have to type it once; the package makes sure it is both typeset and indexed.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-shuffle:texlive-shuffle-doc)
+#. summary(texlive-specs-k:texlive-hvindex-doc)
#, fuzzy
-msgid "Documentation for texlive-shuffle"
+msgid "Documentation for texlive-hvindex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sidecap:texlive-sidecap-doc)
+#. description(texlive-specs-k:texlive-hvindex-doc)
#, fuzzy
-msgid "Documentation for texlive-sidecap"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hvindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sidenotes:texlive-sidenotes-doc)
-#, fuzzy
-msgid "Documentation for texlive-sidenotes"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hypdvips)
+msgid "Hyperref extensions for use with dvips"
+msgstr ""
-#. summary(texlive-sides:texlive-sides-doc)
-#, fuzzy
-msgid "Documentation for texlive-sides"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hypdvips)
+msgid ""
+"The hypdvips package fixes some problems when using hyperref with dvips. It also adds support for breaking links, file attachments, embedded documents and different types of GoTo- links. The cooperation of hyperref with cleveref is improved, which in addition allows an enhanced back-referencing system.\n"
+"\n"
+"date: 2014-03-31 19:51:16 +0000"
+msgstr ""
-#. summary(texlive-silence:texlive-silence-doc)
+#. summary(texlive-specs-k:texlive-hypdvips-doc)
#, fuzzy
-msgid "Documentation for texlive-silence"
+msgid "Documentation for texlive-hypdvips"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-simplecd:texlive-simplecd-doc)
+#. description(texlive-specs-k:texlive-hypdvips-doc)
#, fuzzy
-msgid "Documentation for texlive-simplecd"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hypdvips"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-simplecv:texlive-simplecv-doc)
+#. summary(texlive-specs-k:texlive-hyper)
+msgid "Hypertext cross referencing"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyper)
+msgid ""
+"Redefines LaTeX cross-referencing commands to insert \\special commands for HyperTeX dvi viewers, such as recent versions of xdvi. The package is now largely superseded by hyperref.\n"
+"\n"
+"date: 2011-10-01 23:39:50 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyper-doc)
#, fuzzy
-msgid "Documentation for texlive-simplecv"
+msgid "Documentation for texlive-hyper"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-simplewick:texlive-simplewick-doc)
+#. description(texlive-specs-k:texlive-hyper-doc)
#, fuzzy
-msgid "Documentation for texlive-simplewick"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sitem:texlive-sitem-doc)
+#. summary(texlive-specs-k:texlive-hypernat)
+msgid "Allow hyperref and natbib to work together"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hypernat)
+msgid ""
+"Allows hyperref package and the natbib package with options 'numbers' and 'sort&compress' to work together. This means that multiple sequential citations (e.g [3,2,1]) will be compressed to [1-3], where the '1' and the '3' are (color-)linked to the bibliography.\n"
+"\n"
+"date: 2012-07-15 22:03:18 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hypernat-doc)
#, fuzzy
-msgid "Documentation for texlive-sitem"
+msgid "Documentation for texlive-hypernat"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-siunitx:texlive-siunitx-doc)
+#. description(texlive-specs-k:texlive-hypernat-doc)
#, fuzzy
-msgid "Documentation for texlive-siunitx"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hypernat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-skak:texlive-skak-doc)
+#. summary(texlive-specs-k:texlive-hyperref)
#, fuzzy
-msgid "Documentation for texlive-skak"
-msgstr "Dokumentace pro adaptx"
+msgid "Extensive support for hypertext in LaTeX"
+msgstr "Podpora Unicode pro LaTeX"
-#. summary(texlive-skaknew:texlive-skaknew-doc)
+#. description(texlive-specs-k:texlive-hyperref)
+msgid ""
+"The hyperref package is used to handle cross-referencing commands in LaTeX to produce hypertext links in the document. The package provides backends for the \\special set defined for HyperTeX DVI processors; for embedded pdfmark commands for processing by Acrobat Distiller (dvips and Y&Y's dvipsone); for Y&Y's dviwindo; for PDF control within pdfTeX and dvipdfm; for TeX4ht; and for VTeX's pdf and HTML backends. The package is distributed with the backref and nameref packages, which make use of the facilities of hyperref. The package depends on the author's kvoptions, ltxcmdsand refcount packages.\n"
+"\n"
+"date: 2012-11-14 16:56:09 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyperref-doc)
#, fuzzy
-msgid "Documentation for texlive-skaknew"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-hyperref"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-skb:texlive-skb-doc)
+#. description(texlive-specs-k:texlive-hyperref-doc)
#, fuzzy
-msgid "Documentation for texlive-skb"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyperref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-skdoc:texlive-skdoc-doc)
-msgid "Documentation for texlive-skdoc"
+#. summary(texlive-specs-k:texlive-hyperref-docsrc)
+msgid "Package hyperref-docsrc"
+msgstr "Balíček hyperref-docsrc"
+
+#. description(texlive-specs-k:texlive-hyperref-docsrc)
+msgid "The hyperref-docsrc package"
msgstr ""
-#. summary(texlive-skeycommand:texlive-skeycommand-doc)
+#. summary(texlive-specs-k:texlive-hyperxmp)
+msgid "Embed XMP metadata within a LaTeX document"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyperxmp)
+msgid ""
+"XMP (eXtensible Metadata Platform) is a mechanism proposed by Adobe for embedding document metadata within the document itself. The metadata is designed to be easy to extract, even by programs that are oblivious to the document's file format. Most of Adobe's applications store XMP metadata when saving files. Now, with the hyperxmp package, it is trivial for LaTeX document authors to store XMP metadata in their documents as well. Version 2.2 of the package added support for the IPTC Photo Metadata schema. It allows \\xmpcomma and \\xmpquote to be used in any hyperxmp option, not only those that require special treatment of commas. And it introduces an \\xmplinesep macro that controls how multiline fields are represented in the XMP packet. The package integrates seamlessly with hyperref and requires virtually no modifications to documents that already exploit hyperref's mechanisms for specifying PDF metadata. The current version of hyperxmp can embed the following metadata as XMP: ti
tle, authors, primary author's title or position, metadata writer, subject/summary, keywords, copyright, license URL, document base URL, document identifier and instance identifier, language, source file name, PDF generating tool, PDF version, and contact telephone number/postal address/email address/URL. Hyperxmp currently embeds XMP only within PDF documents; it is compatible with pdflatex, xelatex, latex+dvipdfm, and latex+dvips+ps2pdf.\n"
+"\n"
+"date: 2014-01-03 11:23:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyperxmp-doc)
#, fuzzy
-msgid "Documentation for texlive-skeycommand"
+msgid "Documentation for texlive-hyperxmp"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-skeyval:texlive-skeyval-doc)
+#. description(texlive-specs-k:texlive-hyperxmp-doc)
#, fuzzy
-msgid "Documentation for texlive-skeyval"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyperxmp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-skmath:texlive-skmath-doc)
-msgid "Documentation for texlive-skmath"
+#. summary(texlive-specs-k:texlive-hyph-utf8)
+msgid "Hyphenation patterns expressed in UTF-8"
msgstr ""
-#. summary(texlive-skrapport:texlive-skrapport-doc)
-msgid "Documentation for texlive-skrapport"
+#. description(texlive-specs-k:texlive-hyph-utf8)
+msgid ""
+"Modern native UTF-8 engines such as XeTeX and LuaTeX need hyphenation patterns in UTF-8 format, whereas older systems require hyphenation patterns in the 8-bit encoding of the font in use (such encodings are codified in the LaTeX scheme with names like OT1, T2A, TS1, OML, LY1, etc). The present package offers a collection of conversions of existing patterns to UTF- 8 format, together with converters for use with 8-bit fonts in older systems. Since hyphenation patterns for Knuthian-style TeX systems are only read at iniTeX time, it is hoped that the UTF-8 patterns, with their converters, will completely supplant the older patterns.\n"
+"\n"
+"date: 2014-05-23 07:15:28 +0000"
msgstr ""
-#. summary(texlive-slantsc:texlive-slantsc-doc)
+#. summary(texlive-specs-k:texlive-hyph-utf8-doc)
#, fuzzy
-msgid "Documentation for texlive-slantsc"
+msgid "Documentation for texlive-hyph-utf8"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-slideshow:texlive-slideshow-doc)
+#. description(texlive-specs-k:texlive-hyph-utf8-doc)
#, fuzzy
-msgid "Documentation for texlive-slideshow"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyph-utf8"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-smalltableof:texlive-smalltableof-doc)
+#. summary(texlive-specs-k:texlive-hyphen-afrikaans)
#, fuzzy
-msgid "Documentation for texlive-smalltableof"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Afrikaans Translations for KDE"
+msgid "Afrikaans hyphenation patterns"
+msgstr "Afrikánské překlady pro KDE"
-#. summary(texlive-smartdiagram:texlive-smartdiagram-doc)
-msgid "Documentation for texlive-smartdiagram"
+#. description(texlive-specs-k:texlive-hyphen-afrikaans)
+msgid "Hyphenation patterns for Afrikaans in T1/EC and UTF-8 encodings. OpenOffice includes older patterns created by a different author, but the patterns packaged with TeX are considered superior in quality."
msgstr ""
-#. summary(texlive-smartref:texlive-smartref-doc)
-#, fuzzy
-msgid "Documentation for texlive-smartref"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hyphen-ancientgreek)
+msgid "Ancient Greek hyphenation patterns"
+msgstr ""
-#. summary(texlive-snapshot:texlive-snapshot-doc)
-#, fuzzy
-msgid "Documentation for texlive-snapshot"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hyphen-ancientgreek)
+msgid "Hyphenation patterns for Ancient Greek in LGR and UTF-8 encodings, including support for (obsolete) Ibycus font encoding. Patterns in UTF-8 use two code positions for each of the vowels with acute accent (a.k.a tonos, oxia), e.g., U+03AE, U+1F75 for eta."
+msgstr ""
-#. summary(texlive-snotez:texlive-snotez-doc)
-msgid "Documentation for texlive-snotez"
+#. summary(texlive-specs-k:texlive-hyphen-arabic)
+msgid "(No) Arabic hyphenation patterns"
msgstr ""
-#. summary(texlive-songbook:texlive-songbook-doc)
+#. description(texlive-specs-k:texlive-hyphen-arabic)
+msgid "Prevent hyphenation in Arabic."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-armenian)
+msgid "Armenian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-armenian)
+msgid "Hyphenation patterns for Armenian for Unicode engines."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-base)
+msgid "Package hyphen-base"
+msgstr "Balíček hyphen-base"
+
+#. description(texlive-specs-k:texlive-hyphen-base)
#, fuzzy
-msgid "Documentation for texlive-songbook"
-msgstr "Dokumentace pro adaptx"
+msgid "The hyphen-base package"
+msgstr "Aktualizovat balíky"
-#. summary(texlive-songs:texlive-songs-doc)
-msgid "Documentation for texlive-songs"
+#. summary(texlive-specs-k:texlive-hyphen-basque)
+msgid "Basque hyphenation patterns"
msgstr ""
-#. summary(texlive-sort-by-letters:texlive-sort-by-letters-doc)
+#. description(texlive-specs-k:texlive-hyphen-basque)
#, fuzzy
-msgid "Documentation for texlive-sort-by-letters"
-msgstr "Dokumentace pro adaptx"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid ""
+"Hyphenation patterns for Basque in T1/EC and UTF-8 encodings.\n"
+"\n"
+"date: 2012-05-17 13:24:13 +0000"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-soton:texlive-soton-doc)
+#. summary(texlive-specs-k:texlive-hyphen-bulgarian)
#, fuzzy
-msgid "Documentation for texlive-soton"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Bulgarian Ispell Dictionary"
+msgid "Bulgarian hyphenation patterns"
+msgstr "Bulharský slovník pro ispell"
-#. summary(texlive-soul:texlive-soul-doc)
+#. description(texlive-specs-k:texlive-hyphen-bulgarian)
+msgid "Hyphenation patterns for Bulgarian in T2A and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-catalan)
#, fuzzy
-msgid "Documentation for texlive-soul"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Catalan ispell dictionary"
+msgid "Catalan hyphenation patterns"
+msgstr "Katalánský slovník pro ispell"
-#. summary(texlive-sourcecodepro:texlive-sourcecodepro-doc)
-msgid "Documentation for texlive-sourcecodepro"
+#. description(texlive-specs-k:texlive-hyphen-catalan)
+msgid "Hyphenation patterns for Catalan in T1/EC and UTF-8 encodings."
msgstr ""
-#. summary(texlive-sourcesanspro:texlive-sourcesanspro-doc)
-msgid "Documentation for texlive-sourcesanspro"
+#. summary(texlive-specs-k:texlive-hyphen-chinese)
+msgid "Chinese pinyin hyphenation patterns"
msgstr ""
-#. summary(texlive-spanglish:texlive-spanglish-doc)
-#, fuzzy
-msgid "Documentation for texlive-spanglish"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hyphen-chinese)
+msgid "Hyphenation patterns for unaccented transliterated Mandarin Chinese (pinyin) in T1/EC and UTF-8 encodings."
+msgstr ""
-#. summary(texlive-spanish-mx:texlive-spanish-mx-doc)
-#, fuzzy
-msgid "Documentation for texlive-spanish-mx"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hyphen-coptic)
+msgid "Coptic hyphenation patterns"
+msgstr ""
-#. summary(texlive-sparklines:texlive-sparklines-doc)
+#. description(texlive-specs-k:texlive-hyphen-coptic)
+msgid "Hyphenation patterns for Coptic in UTF-8 encoding as well as in ASCII-based encoding for 8-bit engines. The latter can only be used with special Coptic fonts (like CBcoptic). The patterns are considered experimental."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-croatian)
+msgid "Croatian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-croatian)
#, fuzzy
-msgid "Documentation for texlive-sparklines"
-msgstr "Dokumentace pro adaptx"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid ""
+"Hyphenation patterns for Croatian in T1/EC and UTF-8 encodings.\n"
+"\n"
+"date: 2012-07-15 21:55:51 +0000"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-spath3:texlive-spath3-doc)
-msgid "Documentation for texlive-spath3"
+#. summary(texlive-specs-k:texlive-hyphen-czech)
+msgid "Czech hyphenation patterns"
msgstr ""
-#. summary(texlive-spelling:texlive-spelling-doc)
-msgid "Documentation for texlive-spelling"
+#. description(texlive-specs-k:texlive-hyphen-czech)
+msgid "Hyphenation patterns for Czech in T1/EC and UTF-8 encodings. Original patterns 'czhyphen' are still distributed in the 'csplain' package and loaded with ISO Latin 2 encoding (IL2)."
msgstr ""
-#. summary(texlive-spie:texlive-spie-doc)
-#, fuzzy
-msgid "Documentation for texlive-spie"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hyphen-danish)
+msgid "Danish hyphenation patterns"
+msgstr ""
-#. summary(texlive-splines:texlive-splines-doc)
+#. description(texlive-specs-k:texlive-hyphen-danish)
#, fuzzy
-msgid "Documentation for texlive-splines"
-msgstr "Dokumentace pro adaptx"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid ""
+"Hyphenation patterns for Danish in T1/EC and UTF-8 encodings.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-splitbib:texlive-splitbib-doc)
-#, fuzzy
-msgid "Documentation for texlive-splitbib"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hyphen-dutch)
+msgid "Dutch hyphenation patterns"
+msgstr ""
-#. summary(texlive-splitindex:texlive-splitindex-doc)
-#, fuzzy
-msgid "Documentation for texlive-splitindex"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hyphen-dutch)
+msgid "Hyphenation patterns for Dutch in T1/EC and UTF-8 encodings. These patterns don't handle cases like 'menuutje' > 'menu-tje', and don't hyphenate words that have different hyphenations according to their meaning."
+msgstr ""
-#. summary(texlive-spot:texlive-spot-doc)
-#, fuzzy
-msgid "Documentation for texlive-spot"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-hyphen-english)
+msgid "English hyphenation patterns"
+msgstr ""
-#. summary(texlive-spotcolor:texlive-spotcolor-doc)
-#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-spotcolor"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-k:texlive-hyphen-english)
+msgid "Additional hyphenation patterns for American and British English in ASCII encoding. The American English patterns (usenglishmax) greatly extend the standard patterns from Knuth to find many additional hyphenation points. British English hyphenation is completely different from US English, so has its own set of patterns."
+msgstr ""
-#. summary(texlive-spreadtab:texlive-spreadtab-doc)
+#. summary(texlive-specs-k:texlive-hyphen-esperanto)
#, fuzzy
-msgid "Documentation for texlive-spreadtab"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Esperanto ispell dictionary"
+msgid "Esperanto hyphenation patterns"
+msgstr "Esperantský slovník pro ispell"
-#. summary(texlive-spverbatim:texlive-spverbatim-doc)
-#, fuzzy
-msgid "Documentation for texlive-spverbatim"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-hyphen-esperanto)
+msgid "Hyphenation patterns for Esperanto ISO Latin 3 and UTF-8 encodings. Note that TeX distributions don't ship any suitable fonts in Latin 3 encoding, so unless you create your own font support or want to use MlTeX, using native Unicode engines is highly recommended."
+msgstr ""
-#. summary(texlive-srbook-mem:texlive-srbook-mem-doc)
+#. summary(texlive-specs-k:texlive-hyphen-estonian)
#, fuzzy
-msgid "Documentation for texlive-srbook-mem"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Estonian ispell dictionary"
+msgid "Estonian hyphenation patterns"
+msgstr "Estonský slovník pro ispell"
-#. summary(texlive-srcltx:texlive-srcltx-doc)
+#. description(texlive-specs-k:texlive-hyphen-estonian)
+msgid "Hyphenation patterns for Estonian in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-ethiopic)
+msgid "Hyphenation patterns for Ethiopic scripts"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-ethiopic)
+msgid "Hyphenation patterns for languages written using the Ethiopic script for Unicode engines. They are not supposed to be linguistically relevant in all cases and should, for proper typography, be replaced by files tailored to individual languages."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-farsi)
+msgid "(No) Persian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-farsi)
+msgid "Prevent hyphenation in Persian."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-finnish)
#, fuzzy
-msgid "Documentation for texlive-srcltx"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Finnish ispell dictionary"
+msgid "Finnish hyphenation patterns"
+msgstr "Finský slovníkpro ispell"
-#. summary(texlive-sseq:texlive-sseq-doc)
+#. description(texlive-specs-k:texlive-hyphen-finnish)
#, fuzzy
-msgid "Documentation for texlive-sseq"
-msgstr "Dokumentace pro adaptx"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid ""
+"Hyphenation patterns for Finnish in T1/EC and UTF-8 encodings.\n"
+"\n"
+"date: 2012-07-11 21:21:34 +0000"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-stage:texlive-stage-doc)
+#. summary(texlive-specs-k:texlive-hyphen-french)
+msgid "French hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-french)
+msgid "Hyphenation patterns for French in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-friulan)
+msgid "Friulan hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-friulan)
+msgid "Hyphenation patterns for Friulan in ASCII encoding. They are supposed to comply with the common spelling of the Friulan (Furlan) language as fixed by the Regional Law N.15/96 dated November 6, 1996 and its following amendments."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-galician)
+msgid "Galician hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-galician)
+msgid "Hyphenation patterns for Galician in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-georgian)
#, fuzzy
-msgid "Documentation for texlive-stage"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Estonian ispell dictionary"
+msgid "Georgian hyphenation patterns"
+msgstr "Estonský slovník pro ispell"
-#. summary(texlive-standalone:texlive-standalone-doc)
+#. description(texlive-specs-k:texlive-hyphen-georgian)
#, fuzzy
-msgid "Documentation for texlive-standalone"
-msgstr "Dokumentace pro adaptx"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid "Hyphenation patterns for Georgian in T8M, T8K and UTF-8 encodings."
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-starfont:texlive-starfont-doc)
+#. summary(texlive-specs-k:texlive-hyphen-german)
+msgid "German hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-german)
+msgid "Hyphenation patterns for German in T1/EC and UTF-8 encodings, for traditional and reformed spelling, including Swiss German. The package includes the latest patterns from dehyph-exptl (known to TeX under names 'german', 'ngerman' and 'swissgerman'), however 8-bit engines still load old versions of patterns for 'german' and 'ngerman' for backward- compatibility reasons. Swiss German patterns are suitable for Swiss Standard German (Hochdeutsch) not the Alemannic dialects spoken in Switzerland (Schwyzerduetsch). There are no known patterns for written Schwyzerduetsch."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-greek)
+msgid "Modern Greek hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-greek)
+msgid ""
+"Hyphenation patterns for Modern Greek in monotonic and polytonic spelling in LGR and UTF-8 encodings. Patterns in UTF-8 use two code positions for each of the vowels with acute accent (a.k.a tonos, oxia), e.g., U+03AC, U+1F71 for alpha.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-greek-doc)
#, fuzzy
-msgid "Documentation for texlive-starfont"
+msgid "Documentation for texlive-hyphen-greek"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-startex:texlive-startex-doc)
+#. description(texlive-specs-k:texlive-hyphen-greek-doc)
#, fuzzy
-msgid "Documentation for texlive-startex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyphen-greek"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-statex:texlive-statex-doc)
+#. summary(texlive-specs-k:texlive-hyphen-hungarian)
#, fuzzy
-msgid "Documentation for texlive-statex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Hungarian Ispell Dictionary"
+msgid "Hungarian hyphenation patterns"
+msgstr "Maďarský slovník pro ispell"
-#. summary(texlive-statex2:texlive-statex2-doc)
+#. description(texlive-specs-k:texlive-hyphen-hungarian)
+msgid ""
+"Hyphenation patterns for Hungarian in T1/EC and UTF-8 encodings. From https://github.com/nagybence/huhyphn/.\n"
+"\n"
+"date: 2012-06-19 20:38:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-icelandic)
#, fuzzy
-msgid "Documentation for texlive-statex2"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Icelandic translations for KDE"
+msgid "Icelandic hyphenation patterns"
+msgstr "Islandské překlady pro KDE"
-#. summary(texlive-statistik:texlive-statistik-doc)
+#. description(texlive-specs-k:texlive-hyphen-icelandic)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-statistik"
-msgstr "Dokumentace pro castor"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid ""
+"Hyphenation patterns for Icelandic in T1/EC and UTF-8 encodings.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-staves:texlive-staves-doc)
+#. summary(texlive-specs-k:texlive-hyphen-indic)
+msgid "Indic hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-indic)
+msgid "Hyphenation patterns for Assamese, Bengali, Gujarati, Hindi, Kannada, Malayalam, Marathi, Oriya, Panjabi, Tamil and Telugu for Unicode engines."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-indonesian)
+msgid "Indonesian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-indonesian)
+msgid "Hyphenation patterns for Indonesian (Bahasa Indonesia) in ASCII encoding. They are probably also usable for Malay (Bahasa Melayu)."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-interlingua)
+msgid "Interlingua hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-interlingua)
+msgid "Hyphenation patterns for Interlingua in ASCII encoding."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-irish)
+msgid "Irish hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-irish)
+msgid "Hyphenation patterns for Irish (Gaeilge) in T1/EC and UTF-8 encodings. Visit http://borel.slu.edu/fleiscin/index.html for more information."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-italian)
#, fuzzy
-msgid "Documentation for texlive-staves"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Italian ispell dictionary"
+msgid "Italian hyphenation patterns"
+msgstr "Italský slovník pro ispell"
-#. summary(texlive-stdclsdv:texlive-stdclsdv-doc)
+#. description(texlive-specs-k:texlive-hyphen-italian)
+msgid ""
+"Hyphenation patterns for Italian in ASCII encoding. Compliant with the Recommendation UNI 6461 on hyphenation issued by the Italian Standards Institution (Ente Nazionale di Unificazione UNI).\n"
+"\n"
+"date: 2012-06-23 17:46:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-kurmanji)
+msgid "Kurmanji hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-kurmanji)
+msgid "Hyphenation patterns for Kurmanji (Northern Kurdish) as spoken in Turkey and by the Kurdish diaspora in Europe, in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-latin)
+msgid "Latin hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-latin)
+msgid ""
+"Hyphenation patterns for Latin in T1/EC and UTF-8 encodings, mainly in modern spelling (u when u is needed and v when v is needed), medieval spelling with the ligatures \\ae and \\oe and the (uncial) lowercase 'v' written as a 'u' is also supported. Apparently there is no conflict between the patterns of modern Latin and those of medieval Latin.\n"
+"\n"
+"date: 2012-06-23 22:35:21 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-latvian)
+msgid "Latvian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-latvian)
+msgid "Hyphenation patterns for Latvian in L7X and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-lithuanian)
#, fuzzy
-msgid "Documentation for texlive-stdclsdv"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Lithuanian translations for KDE"
+msgid "Lithuanian hyphenation patterns"
+msgstr "Litevské překlady pro KDE"
-#. summary(texlive-stdpage:texlive-stdpage-doc)
+#. description(texlive-specs-k:texlive-hyphen-lithuanian)
+msgid "Hyphenation patterns for Lithuanian in L7X and UTF-8 encodings. \\lefthyphenmin and \\righthyphenmin have to be at least 2."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-mongolian)
+msgid "Mongolian hyphenation patterns in Cyrillic script"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-mongolian)
+msgid "Hyphenation patterns for Mongolian in T2A, LMC and UTF-8 encodings. LMC encoding is used in MonTeX. The package includes two sets of patterns that will hopefully be merged in future."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-norwegian)
#, fuzzy
-msgid "Documentation for texlive-stdpage"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Norwegian (Bokmaal) Translations for KDE"
+msgid "Norwegian Bokmal and Nynorsk hyphenation patterns"
+msgstr "Norské (Bokmaal) překlady pro KDE"
-#. summary(texlive-steinmetz:texlive-steinmetz-doc)
+#. description(texlive-specs-k:texlive-hyphen-norwegian)
+msgid "Hyphenation patterns for Norwegian Bokmal and Nynorsk in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-piedmontese)
#, fuzzy
-msgid "Documentation for texlive-steinmetz"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Portuguese ispell dictionary"
+msgid "Piedmontese hyphenation patterns"
+msgstr "Portugalský slovník pro ispell"
-#. summary(texlive-stellenbosch:texlive-stellenbosch-doc)
+#. description(texlive-specs-k:texlive-hyphen-piedmontese)
+msgid "Hyphenation patterns for Piedmontese in ASCII encoding. Compliant with 'Gramatica dla lengua piemonteisa' by Camillo Brero."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-polish)
+msgid "Polish hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-polish)
+msgid ""
+"Hyphenation patterns for Polish in QX and UTF-8 encodings. These patterns are also used by Polish TeX formats MeX and LaMeX.\n"
+"\n"
+"date: 2012-06-08 15:19:18 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-portuguese)
#, fuzzy
-msgid "Documentation for texlive-stellenbosch"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Portuguese ispell dictionary"
+msgid "Portuguese hyphenation patterns"
+msgstr "Portugalský slovník pro ispell"
-#. summary(texlive-stex:texlive-stex-doc)
+#. description(texlive-specs-k:texlive-hyphen-portuguese)
+msgid "Hyphenation patterns for Portuguese in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-romanian)
+msgid "Romanian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-romanian)
+msgid "Hyphenation patterns for Romanian in T1/EC and UTF-8 encodings. The UTF-8 patterns use U+0219 for the character 's with comma accent' and U+021B for 't with comma accent', but we may consider using U+015F and U+0163 as well in the future."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-romansh)
+msgid "Romansh hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-romansh)
+msgid "Hyphenation patterns for Romansh in ASCII encoding. They are supposed to comply with the rules indicated by the Lia Rumantscha (Romansh language society)."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-russian)
#, fuzzy
-msgid "Documentation for texlive-stex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Russian ispell dictionary"
+msgid "Russian hyphenation patterns"
+msgstr "Ruský slovník pro ispell"
-#. summary(texlive-stix:texlive-stix-doc)
+#. description(texlive-specs-k:texlive-hyphen-russian)
+msgid "Hyphenation patterns for Russian in T2A and UTF-8 encodings. For 8-bit engines, the 'ruhyphen' package provides a number of different pattern sets, as well as different (8-bit) encodings, that can be chosen at format-generation time. The UTF-8 version only provides the default pattern set. A mechanism similar to the one used for 8-bit patterns may be implemented in the future."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-sanskrit)
+msgid "Sanskrit hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-sanskrit)
+msgid "Hyphenation patterns for Sanskrit and Prakrit in transliteration, and in Devanagari, Bengali, Kannada, Malayalam and Telugu scripts for Unicode engines."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-serbian)
+msgid "Serbian hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-serbian)
+msgid ""
+"Hyphenation patterns for Serbian in T1/EC, T2A and UTF-8 encodings. For 8-bit engines the patterns are available separately as 'serbian' in T1/EC encoding for Latin script and 'serbianc' in T2A encoding for Cyrillic script. Unicode engines should only use 'serbian' which has patterns in both scripts combined.\n"
+"\n"
+"date: 2012-07-10 12:48:34 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-slovak)
+msgid "Slovak hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-slovak)
+msgid "Hyphenation patterns for Slovak in T1/EC and UTF-8 encodings. Original patterns 'skhyphen' are still distributed in the 'csplain' package and loaded with ISO Latin 2 encoding (IL2)."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-slovenian)
#, fuzzy
-msgid "Documentation for texlive-stix"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Slovenian ispell dictionary"
+msgid "Slovenian hyphenation patterns"
+msgstr "Slovinský slovník pro ispell"
-#. summary(texlive-stmaryrd:texlive-stmaryrd-doc)
+#. description(texlive-specs-k:texlive-hyphen-slovenian)
+msgid "Hyphenation patterns for Slovenian in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-spanish)
#, fuzzy
-msgid "Documentation for texlive-stmaryrd"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Spanish ispell dictionary"
+msgid "Spanish hyphenation patterns"
+msgstr "Španělský slovník pro ispell"
-#. summary(texlive-storebox:texlive-storebox-doc)
+#. description(texlive-specs-k:texlive-hyphen-spanish)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-storebox"
-msgstr "Dokumentace pro castor"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid ""
+"Hyphenation patterns for Spanish in T1/EC and UTF-8 encodings.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-storecmd:texlive-storecmd-doc)
+#. summary(texlive-specs-k:texlive-hyphen-swedish)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-storecmd"
-msgstr "Dokumentace pro castor"
+#| msgid "Swedish ispell dictionary"
+msgid "Swedish hyphenation patterns"
+msgstr "Švédský slovník pro ispell"
-#. summary(texlive-stringstrings:texlive-stringstrings-doc)
+#. description(texlive-specs-k:texlive-hyphen-swedish)
+msgid "Hyphenation patterns for Swedish in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-thai)
#, fuzzy
-msgid "Documentation for texlive-stringstrings"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Italian ispell dictionary"
+msgid "Thai hyphenation patterns"
+msgstr "Italský slovník pro ispell"
-#. summary(texlive-struktex:texlive-struktex-doc)
+#. description(texlive-specs-k:texlive-hyphen-thai)
#, fuzzy
-msgid "Documentation for texlive-struktex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid "Hyphenation patterns for Thai in LTH and UTF-8 encodings."
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. summary(texlive-sttools:texlive-sttools-doc)
+#. summary(texlive-specs-k:texlive-hyphen-turkish)
+msgid "Turkish hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-turkish)
+msgid ""
+"Hyphenation patterns for Turkish in T1/EC and UTF-8 encodings. The patterns for Turkish were first produced for the Ottoman Texts Project in 1987 and were suitable for both Modern Turkish and Ottoman Turkish in Latin script, however the required character set didn't fit into EC encoding, so support for Ottoman Turkish had to be dropped to keep compatibility with 8- bit engines.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-turkmen)
+msgid "Turkmen hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-turkmen)
+msgid "Hyphenation patterns for Turkmen in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-ukrainian)
#, fuzzy
-msgid "Documentation for texlive-sttools"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Ukrainian Translations for KDE"
+msgid "Ukrainian hyphenation patterns"
+msgstr "Ukrajinské překlady pro KDE"
-#. summary(texlive-stubs:texlive-stubs-doc)
+#. description(texlive-specs-k:texlive-hyphen-ukrainian)
+msgid "Hyphenation patterns for Ukrainian in T2A and UTF-8 encodings. For 8-bit engines, the 'ukrhyph' package provides a number of different pattern sets, as well as different (8-bit) encodings, that can be chosen at format-generation time. The UTF-8 version only provides the default pattern set. A mechanism similar to the one used for 8-bit patterns may be implemented in the future."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-uppersorbian)
#, fuzzy
-msgid "Documentation for texlive-stubs"
-msgstr "Dokumentace pro adaptx"
+msgid "Upper Sorbian hyphenation patterns"
+msgstr "Srbské překlady pro KDE"
-#. summary(texlive-sty2dtx:texlive-sty2dtx-doc)
+#. description(texlive-specs-k:texlive-hyphen-uppersorbian)
+msgid "Hyphenation patterns for Upper Sorbian in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphen-welsh)
+msgid "Welsh hyphenation patterns"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphen-welsh)
+msgid "Hyphenation patterns for Welsh in T1/EC and UTF-8 encodings."
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphenat)
+msgid "Disable/enable hypenation"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphenat)
+msgid ""
+"This package can disable all hyphenation or enable hyphenation of non-alphabetics or monospaced fonts. The package can also enable hyphenation within 'words' that contain non-alphabetic characters (e.g., that include underscores), and hyphenation of text typeset in monospaced (e.g., cmtt) fonts.\n"
+"\n"
+"date: 2012-07-16 08:42:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyphenat-doc)
#, fuzzy
-msgid "Documentation for texlive-sty2dtx"
+msgid "Documentation for texlive-hyphenat"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-suanpan:texlive-suanpan-doc)
+#. description(texlive-specs-k:texlive-hyphenat-doc)
#, fuzzy
-msgid "Documentation for texlive-suanpan"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyphenat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-subdepth:texlive-subdepth-doc)
+#. summary(texlive-specs-k:texlive-hyphenex)
+msgid "Generate a hyphenation exceptions file"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyphenex)
+msgid ""
+"Exceptions for American English hyphenation patterns are occasionally published in the TeX User Group magazine TUGboat. This bundle provides alternative Perl and Bourne shell scripts to convert the source of such an article into an exceptions file, together with a recent copy of the article and its translation.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyplain)
+msgid "Basic support for multiple languages in Plain TeX"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-hyplain)
+msgid ""
+"The package offers a means to set up hyphenation suitable for several languages and/or dialects, and to select them or switch between them while typesetting.\n"
+"\n"
+"date: 2012-07-16 08:42:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-hyplain-doc)
#, fuzzy
-msgid "Documentation for texlive-subdepth"
+msgid "Documentation for texlive-hyplain"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subeqn:texlive-subeqn-doc)
+#. description(texlive-specs-k:texlive-hyplain-doc)
#, fuzzy
-msgid "Documentation for texlive-subeqn"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-hyplain"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-subeqnarray:texlive-subeqnarray-doc)
+#. summary(texlive-specs-k:texlive-ibycus-babel)
+msgid "Use the Ibycus 4 Greek font with Babel"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-ibycus-babel)
+msgid ""
+"The package allows you to use the Ibycus 4 font for ancient Greek with Babel. It uses a Perl script to generate hyphenation patterns for Ibycus from those for the ordinary Babel encoding, cbgreek. It sets up ibycus as a pseudo-language you can specify in the normal Babel manner. For proper hyphenation of Greek quoted in mid-paragraph, you should use it with elatex (all current distributions of LaTeX are built with e-TeX, so the constraint should not be onerous).\n"
+"\n"
+"date: 2012-02-26 18:37:31 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-ibycus-babel-doc)
#, fuzzy
-msgid "Documentation for texlive-subeqnarray"
+msgid "Documentation for texlive-ibycus-babel"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subfig:texlive-subfig-doc)
+#. description(texlive-specs-k:texlive-ibycus-babel-doc)
#, fuzzy
-msgid "Documentation for texlive-subfig"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ibycus-babel"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-subfigmat:texlive-subfigmat-doc)
+#. summary(texlive-specs-k:texlive-ibygrk)
+msgid "Fonts and macros to typeset ancient Greek"
+msgstr ""
+
+#. description(texlive-specs-k:texlive-ibygrk)
+msgid ""
+"Ibycus is a Greek typeface, based on Silvio Levy's realisation of a classic Didot cut of Greek type from around 1800. The fonts are available both as Metafont source and in Adobe Type 1 format. This distribution of ibycus is accompanied by a set of macro packages to use it with Plain TeX or LaTeX, but for use with Babel, see the ibycus-babel package.\n"
+"\n"
+"date: 2014-05-08 13:40:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-ibygrk-doc)
#, fuzzy
-msgid "Documentation for texlive-subfigmat"
+msgid "Documentation for texlive-ibygrk"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subfigure:texlive-subfigure-doc)
+#. description(texlive-specs-k:texlive-ibygrk-doc)
#, fuzzy
-msgid "Documentation for texlive-subfigure"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-ibygrk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-subfiles:texlive-subfiles-doc)
-msgid "Documentation for texlive-subfiles"
+#. summary(texlive-specs-k:texlive-ibygrk-fonts)
+msgid "Severed fonts for texlive-ibygrk"
msgstr ""
-#. summary(texlive-subfloat:texlive-subfloat-doc)
-#, fuzzy
-msgid "Documentation for texlive-subfloat"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-ibygrk-fonts)
+msgid "The separated fonts package for texlive-ibygrk"
+msgstr ""
-#. summary(texlive-substances:texlive-substances-doc)
-msgid "Documentation for texlive-substances"
+#. summary(texlive-specs-k:texlive-icsv)
+msgid "Class for typesetting articles for the ICSV conference"
msgstr ""
-#. summary(texlive-substitutefont:texlive-substitutefont-doc)
-#, fuzzy
-msgid "Documentation for texlive-substitutefont"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-icsv)
+msgid ""
+"This is an ad-hoc class for typesetting articles for the ICSV conference, based on the earler active-conf by the same author.\n"
+"\n"
+"date: 2012-05-08 19:52:08 +0000"
+msgstr ""
-#. summary(texlive-substr:texlive-substr-doc)
+#. summary(texlive-specs-k:texlive-icsv-doc)
#, fuzzy
-msgid "Documentation for texlive-substr"
+msgid "Documentation for texlive-icsv"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subsupscripts:texlive-subsupscripts-doc)
+#. description(texlive-specs-k:texlive-icsv-doc)
#, fuzzy
-msgid "Documentation for texlive-subsupscripts"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-icsv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sudoku:texlive-sudoku-doc)
-#, fuzzy
-msgid "Documentation for texlive-sudoku"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-k:texlive-idxcmds)
+msgid "Semantic commands for adding formatted index entries"
+msgstr ""
-#. summary(texlive-sudokubundle:texlive-sudokubundle-doc)
-#, fuzzy
-msgid "Documentation for texlive-sudokubundle"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-idxcmds)
+msgid ""
+"The package provides commands for adding formatted index entries; it arises from the author's work on large documents.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-suftesi:texlive-suftesi-doc)
+#. summary(texlive-specs-k:texlive-idxcmds-doc)
#, fuzzy
-msgid "Documentation for texlive-suftesi"
+msgid "Documentation for texlive-idxcmds"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sugconf:texlive-sugconf-doc)
+#. description(texlive-specs-k:texlive-idxcmds-doc)
#, fuzzy
-msgid "Documentation for texlive-sugconf"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-idxcmds"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-superiors:texlive-superiors-doc)
-msgid "Documentation for texlive-superiors"
+#. summary(texlive-specs-k:texlive-idxlayout)
+msgid "Configurable index layout, responsive to KOMA-Script and memoir"
msgstr ""
-#. summary(texlive-supertabular:texlive-supertabular-doc)
+#. description(texlive-specs-k:texlive-idxlayout)
+msgid ""
+"The idxlayout package offers a key-value interface to configure index layout parameters, e.g. allowing for three-column indexes or for \"parent\" items and their affiliated subitems being typeset as a single paragraph. The package is responsive to the index-related options and commands of the KOMA-Script and memoir classes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-k:texlive-idxlayout-doc)
#, fuzzy
-msgid "Documentation for texlive-supertabular"
+msgid "Documentation for texlive-idxlayout"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-susy:texlive-susy-doc)
+#. description(texlive-specs-k:texlive-idxlayout-doc)
#, fuzzy
-msgid "Documentation for texlive-susy"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-idxlayout"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-svg:texlive-svg-doc)
-msgid "Documentation for texlive-svg"
+#. summary(texlive-specs-k:texlive-ieeepes)
+msgid "IEEE Power Engineering Society Transactions"
msgstr ""
-#. summary(texlive-svgcolor:texlive-svgcolor-doc)
-#, fuzzy
-msgid "Documentation for texlive-svgcolor"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-k:texlive-ieeepes)
+msgid ""
+"Supports typesetting of transactions, as well as discussions and closures, for the IEEE Power Engineering Society Transactions journals.\n"
+"\n"
+"date: 2011-10-06 13:17:32 +0000"
+msgstr ""
-#. summary(texlive-svn:texlive-svn-doc)
+#. summary(texlive-specs-k:texlive-ieeepes-doc)
#, fuzzy
-msgid "Documentation for texlive-svn"
+msgid "Documentation for texlive-ieeepes"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-svn-multi:texlive-svn-multi-doc)
+#. description(texlive-specs-k:texlive-ieeepes-doc)
#, fuzzy
-msgid "Documentation for texlive-svn-multi"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ieeepes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-svn-prov:texlive-svn-prov-doc)
-#, fuzzy
-msgid "Documentation for texlive-svn-prov"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ifetex)
+msgid "Provides \\ifetex switch"
+msgstr ""
-#. summary(texlive-svninfo:texlive-svninfo-doc)
-#, fuzzy
-msgid "Documentation for texlive-svninfo"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-ifetex)
+msgid ""
+"The package provides the switch \\ifetex which indicates whether e-TeX is available or not. The package can be loaded as LaTeX package using \\usepackage{ifetex} or in plain TeX using \\input ifetex. In either case it aborts silently if the \\ifetex macro is already defined. The package's test is whether \\eTeXversion is defined as a primitive; if it is, the package assumes e-TeX features are available.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-swebib:texlive-swebib-doc)
+#. summary(texlive-specs-l:texlive-ifetex-doc)
#, fuzzy
-msgid "Documentation for texlive-swebib"
+msgid "Documentation for texlive-ifetex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-swimgraf:texlive-swimgraf-doc)
+#. description(texlive-specs-l:texlive-ifetex-doc)
#, fuzzy
-msgid "Documentation for texlive-swimgraf"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifetex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-syllogism:texlive-syllogism-doc)
+#. summary(texlive-specs-l:texlive-ifluatex)
+msgid "Provides the \\ifluatex switch"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-ifluatex)
+msgid ""
+"The package looks for LuaTeX regardless of its mode and provides the switch \\ifluatex; it works with Plain TeX or LaTeX. The package is part of the oberdiek bundle.\n"
+"\n"
+"date: 2012-07-10 20:54:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifluatex-doc)
#, fuzzy
-msgid "Documentation for texlive-syllogism"
+msgid "Documentation for texlive-ifluatex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-synproof:texlive-synproof-doc)
+#. description(texlive-specs-l:texlive-ifluatex-doc)
#, fuzzy
-msgid "Documentation for texlive-synproof"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifluatex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-syntax:texlive-syntax-doc)
+#. summary(texlive-specs-l:texlive-ifmslide)
+msgid "Presentation slides for screen and printouts"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-ifmslide)
+msgid ""
+"This package is used to produce printed slides with latex and online presentations with pdflatex. It is provided by the 'Institute of Mechanics' (ifm) Univ. of Technology Darmstadt, Germany. It is based on ideas of pdfslide, but completely rewritten for compatibility with texpower and seminar. The manual describes all functions and provides a sample.\n"
+"\n"
+"date: 2012-02-22 23:03:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifmslide-doc)
#, fuzzy
-msgid "Documentation for texlive-syntax"
+msgid "Documentation for texlive-ifmslide"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-syntrace:texlive-syntrace-doc)
+#. description(texlive-specs-l:texlive-ifmslide-doc)
#, fuzzy
-msgid "Documentation for texlive-syntrace"
-msgstr "HTML dokumentace pro GNU C Library"
+msgid "This package includes the documentation for texlive-ifmslide"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-synttree:texlive-synttree-doc)
-#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-synttree"
-msgstr "Dokumentace pro castor"
+#. summary(texlive-specs-l:texlive-ifmtarg)
+msgid "If-then-else command for processing potentially empty arguments"
+msgstr ""
-#. summary(texlive-systeme:texlive-systeme-doc)
+#. description(texlive-specs-l:texlive-ifmtarg)
+msgid ""
+"The ifmtarg package\n"
+"\n"
+"date: 2012-05-29 13:13:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifmtarg-doc)
#, fuzzy
-msgid "Documentation for texlive-systeme"
+msgid "Documentation for texlive-ifmtarg"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-t-angles:texlive-t-angles-doc)
+#. description(texlive-specs-l:texlive-ifmtarg-doc)
#, fuzzy
-msgid "Documentation for texlive-t-angles"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifmtarg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-t2:texlive-t2-doc)
+#. summary(texlive-specs-l:texlive-ifnextok)
+msgid "Utility macro: peek ahead without ignoring spaces"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-ifnextok)
+msgid ""
+"The package deals with the behaviour of the LaTeX internal command \\@ifnextchar, which skips blank spaces. This has the potential to surprise users, since it can produce really unwanted effects. A common example occurs with brackets starting a line following \\\\: the command looks for an optional argument, whereas the user wants the brackets to be printed. The package offers commands and options for modifying this behaviour, maybe limited to certain parts of the document source.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifnextok-doc)
#, fuzzy
-msgid "Documentation for texlive-t2"
+msgid "Documentation for texlive-ifnextok"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tabfigures:texlive-tabfigures-doc)
+#. description(texlive-specs-l:texlive-ifnextok-doc)
#, fuzzy
-msgid "Documentation for texlive-tabfigures"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifnextok"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tableaux:texlive-tableaux-doc)
+#. summary(texlive-specs-l:texlive-ifoddpage)
+msgid "Determine if the current page is odd or even"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-ifoddpage)
+msgid ""
+"The package provides an \\ifoddpage conditional to determine if the current page is odd or even. The macro \\checkoddpage must be used direct before to check the page number using a label. Two compiler runs are therefore required to achieve correct results. In addition, the conditional \\ifoddpageoronside is provided which is also true in oneside mode where all pages use the odd page layout.\n"
+"\n"
+"date: 2013-11-21 20:20:37 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifoddpage-doc)
#, fuzzy
-msgid "Documentation for texlive-tableaux"
+msgid "Documentation for texlive-ifoddpage"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tablefootnote:texlive-tablefootnote-doc)
+#. description(texlive-specs-l:texlive-ifoddpage-doc)
#, fuzzy
-msgid "Documentation for texlive-tablefootnote"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifoddpage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tableof:texlive-tableof-doc)
-msgid "Documentation for texlive-tableof"
+#. summary(texlive-specs-l:texlive-ifplatform)
+msgid "Conditionals to test which platform is being used"
msgstr ""
-#. summary(texlive-tablists:texlive-tablists-doc)
+#. description(texlive-specs-l:texlive-ifplatform)
+msgid ""
+"This package uses the (La)TeX extension -shell-escape to establish whether the document is being processed on a Windows or on a Unix-like system (Mac OS X, Linux, etc.), or on Cygwin (Unix environment over a windows system). Booleans provided are: \\ifwindows, \\iflinux, \\ifmacosx and \\ifcygwin. The package also preserves the output of uname on a Unix-like system, which may be used to distinguish between various classes of Unix systems.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifplatform-doc)
#, fuzzy
#| msgid "Documentation for castor"
-msgid "Documentation for texlive-tablists"
+msgid "Documentation for texlive-ifplatform"
msgstr "Dokumentace pro castor"
-#. summary(texlive-tablor:texlive-tablor-doc)
+#. description(texlive-specs-l:texlive-ifplatform-doc)
#, fuzzy
-msgid "Documentation for texlive-tablor"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifplatform"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tabls:texlive-tabls-doc)
+#. summary(texlive-specs-l:texlive-ifsym)
#, fuzzy
-msgid "Documentation for texlive-tabls"
-msgstr "Dokumentace pro adaptx"
+#| msgid "A Collection of How-Tos"
+msgid "A collection of symbols"
+msgstr "Sada HOWTO"
-#. summary(texlive-tabriz-thesis:texlive-tabriz-thesis-doc)
-msgid "Documentation for texlive-tabriz-thesis"
+#. description(texlive-specs-l:texlive-ifsym)
+msgid ""
+"A set of symbol fonts, written in Metafont, offering (respectively) clock-face symbols, geometrical symbols, weather symbols, mountaineering symbols, electronic circuit symbols and a set of miscellaneous symbols. A LaTeX package is provided, that allows the user to load only those symbols needed in a document.\n"
+"\n"
+"date: 2014-05-08 13:40:26 +0000"
msgstr ""
-#. summary(texlive-tabto-ltx:texlive-tabto-ltx-doc)
+#. summary(texlive-specs-l:texlive-ifsym-doc)
#, fuzzy
-msgid "Documentation for texlive-tabto-ltx"
+msgid "Documentation for texlive-ifsym"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tabu:texlive-tabu-doc)
+#. description(texlive-specs-l:texlive-ifsym-doc)
#, fuzzy
-msgid "Documentation for texlive-tabu"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifsym"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tabularborder:texlive-tabularborder-doc)
-#, fuzzy
-msgid "Documentation for texlive-tabularborder"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-iftex)
+msgid "Am I running under pdfTeX, XeTeX or LuaTeX?"
+msgstr ""
-#. summary(texlive-tabularcalc:texlive-tabularcalc-doc)
-#, fuzzy
-msgid "Documentation for texlive-tabularcalc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iftex)
+msgid ""
+"The package, which works both for Plain TeX and for LaTeX, defines the \\ifPDFTeX, \\ifXeTeX, and \\ifLuaTeX conditionals for testing which engine is being used for typesetting. The package also provides the \\RequirePDFTeX, \\RequireXeTeX, and \\RequireLuaTeX commands which throw an error if pdfTeX, XeTeX or LuaTeX (respectively) is not the engine in use.\n"
+"\n"
+"date: 2014-04-29 04:13:54 +0000"
+msgstr ""
-#. summary(texlive-tabularew:texlive-tabularew-doc)
+#. summary(texlive-specs-l:texlive-iftex-doc)
#, fuzzy
-msgid "Documentation for texlive-tabularew"
+msgid "Documentation for texlive-iftex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tabulary:texlive-tabulary-doc)
+#. description(texlive-specs-l:texlive-iftex-doc)
#, fuzzy
-msgid "Documentation for texlive-tabulary"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-iftex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tabvar:texlive-tabvar-doc)
+#. summary(texlive-specs-l:texlive-ifthenx)
#, fuzzy
-msgid "Documentation for texlive-tabvar"
-msgstr "Dokumentace pro adaptx"
+msgid "Extra tests for \\ifthenelse"
+msgstr "Standardní jádro"
-#. summary(texlive-tagging:texlive-tagging-doc)
+#. description(texlive-specs-l:texlive-ifthenx)
+msgid ""
+"The package extends the ifthen package, providing extra predicates for the package's \\ifthenelse command. The package is complementary to xifthen, in that they provide different facilities; the two may be loaded in the same document, as long as xifthen is loaded first.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifthenx-doc)
#, fuzzy
-msgid "Documentation for texlive-tagging"
+msgid "Documentation for texlive-ifthenx"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-talk:texlive-talk-doc)
+#. description(texlive-specs-l:texlive-ifthenx-doc)
#, fuzzy
-msgid "Documentation for texlive-talk"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ifthenx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tamefloats:texlive-tamefloats-doc)
-msgid "Documentation for texlive-tamefloats"
+#. summary(texlive-specs-l:texlive-ifxetex)
+msgid "Am I running under XeTeX?"
msgstr ""
-#. summary(texlive-tap:texlive-tap-doc)
+#. description(texlive-specs-l:texlive-ifxetex)
+msgid ""
+"A simple package which provides an \\ifxetex conditional, so that other code can determine that it is running under XeTeX. The package requires the e-TeX extensions to the TeX primitive set.\n"
+"\n"
+"date: 2012-03-06 14:23:45 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ifxetex-doc)
#, fuzzy
-msgid "Documentation for texlive-tap"
+msgid "Documentation for texlive-ifxetex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tapir:texlive-tapir-doc)
+#. description(texlive-specs-l:texlive-ifxetex-doc)
#, fuzzy
-msgid "Documentation for texlive-tapir"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-ifxetex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tcldoc:texlive-tcldoc-doc)
-#, fuzzy
-msgid "Documentation for texlive-tcldoc"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-iitem)
+msgid "Multiple level of lists in one list-like environment"
+msgstr ""
-#. summary(texlive-tcolorbox:texlive-tcolorbox-doc)
-#, fuzzy
-msgid "Documentation for texlive-tcolorbox"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iitem)
+msgid ""
+"The package defines multiple level lists within one list-like environment. instead of writing \\begin{enumerate} \\item 1 \\begin{enumerate} \\item 2 \\begin{enumerate} \\item 3 \\begin{enumerate} \\item 4 \\end{enumerate} \\end{enumerate} \\item 2.1 \\end{enumerate} \\item 1.1 \\begin{enumerate} \\item 2 \\end{enumerate} \\end{enumerate} this package allows you to write \\begin{enumerate} \\item 1 \\iitem 2 \\iiitem 3 \\ivtem 4 \\iitem 2.1 \\item 1.1 \\iitem 2 \\end{enumerate}\n"
+"\n"
+"date: 2013-04-09 13:55:17 +0000"
+msgstr ""
-#. summary(texlive-tdclock:texlive-tdclock-doc)
+#. summary(texlive-specs-l:texlive-iitem-doc)
#, fuzzy
-msgid "Documentation for texlive-tdclock"
+msgid "Documentation for texlive-iitem"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tdsfrmath:texlive-tdsfrmath-doc)
+#. description(texlive-specs-l:texlive-iitem-doc)
#, fuzzy
-msgid "Documentation for texlive-tdsfrmath"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-iitem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-technics:texlive-technics-doc)
-#, fuzzy
-msgid "Documentation for texlive-technics"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ijmart)
+msgid "LaTeX Class for the Israel Journal of Mathematics"
+msgstr ""
-#. summary(texlive-ted:texlive-ted-doc)
+#. description(texlive-specs-l:texlive-ijmart)
+msgid ""
+"The Israel Journal of Mathematics is published by The Hebrew University Magnes Press. This class provides LaTeX support for its authors and editors. It strives to achieve the distinct \"look and feel\" of the journal, while having the interface similar to that of the amsart document class. This will help authors already familiar with amsart to easily submit manuscripts for The Israel Journal of Mathematics or to put the preprints in arXiv with minimal changes in the LaTeX source.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ijmart-doc)
#, fuzzy
-msgid "Documentation for texlive-ted"
+msgid "Documentation for texlive-ijmart"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tengwarscript:texlive-tengwarscript-doc)
+#. description(texlive-specs-l:texlive-ijmart-doc)
#, fuzzy
-msgid "Documentation for texlive-tengwarscript"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-ijmart"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tensor:texlive-tensor-doc)
-#, fuzzy
-msgid "Documentation for texlive-tensor"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ijqc)
+msgid "BibTeX style file for the Intl. J. Quantum Chem"
+msgstr ""
-#. summary(texlive-termcal:texlive-termcal-doc)
+#. description(texlive-specs-l:texlive-ijqc)
+msgid ""
+"ijqc.bst is a BibTeX style file to support publication in Wiley's International Journal of Quantum Chemistry. It is not in any way officially endorsed by the publisher or editors, and is provided without any warranty one could ever think of.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-ijqc-doc)
#, fuzzy
-msgid "Documentation for texlive-termcal"
+msgid "Documentation for texlive-ijqc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-termlist:texlive-termlist-doc)
+#. description(texlive-specs-l:texlive-ijqc-doc)
#, fuzzy
-msgid "Documentation for texlive-termlist"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-ijqc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tetex:texlive-tetex-doc)
-#, fuzzy
-msgid "Documentation for texlive-tetex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-imac)
+msgid "International Modal Analysis Conference format"
+msgstr ""
-#. summary(texlive-teubner:texlive-teubner-doc)
-#, fuzzy
-msgid "Documentation for texlive-teubner"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-imac)
+msgid ""
+"A set of files for producing correctly formatted documents for the International Modal Analysis Conference. The bundle provides a LaTeX package and a BibTeX style file.\n"
+"\n"
+"date: 2012-05-29 13:13:53 +0000"
+msgstr ""
-#. summary(texlive-tex-ewd:texlive-tex-ewd-doc)
+#. summary(texlive-specs-l:texlive-imac-doc)
#, fuzzy
-msgid "Documentation for texlive-tex-ewd"
+msgid "Documentation for texlive-imac"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tex-gyre:texlive-tex-gyre-doc)
+#. description(texlive-specs-l:texlive-imac-doc)
#, fuzzy
-msgid "Documentation for texlive-tex-gyre"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-imac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tex-gyre-math:texlive-tex-gyre-math-doc)
-msgid "Documentation for texlive-tex-gyre-math"
+#. summary(texlive-specs-l:texlive-image-gallery)
+msgid "Create an overview of pictures from a digital camera or from other sources"
msgstr ""
-#. summary(texlive-tex-label:texlive-tex-label-doc)
-#, fuzzy
-msgid "Documentation for texlive-tex-label"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-image-gallery)
+msgid ""
+"The class may be used to create an overview of pictures from a digital camera or from other sources. It is possible to adjust the size of the pictures and all the margins. The example file shows the usage.\n"
+"\n"
+"date: 2012-11-14 10:10:16 +0000"
+msgstr ""
-#. summary(texlive-tex-ps:texlive-tex-ps-doc)
+#. summary(texlive-specs-l:texlive-image-gallery-doc)
#, fuzzy
-msgid "Documentation for texlive-tex-ps"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-image-gallery"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-tex4ht:texlive-tex4ht-doc)
+#. description(texlive-specs-l:texlive-image-gallery-doc)
#, fuzzy
-msgid "Documentation for texlive-tex4ht"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-image-gallery"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texapi:texlive-texapi-doc)
-#, fuzzy
-msgid "Documentation for texlive-texapi"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-imakeidx)
+msgid "A package for producing multiple indexes"
+msgstr ""
-#. summary(texlive-texconfig:texlive-texconfig-doc)
-#, fuzzy
-msgid "Documentation for texlive-texconfig"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-imakeidx)
+msgid ""
+"The package enables the user to produce and typeset one or more indexes simultaneously with a document. The package is known to work in LaTeX documents processed with pdflatex, xelatatex and lualatex. If makeindex is used for processing the index entries, no particular setting up is needed when TeX Live is used. Using xindy or other programs it is necessary to enable shell escape; shell escape is also needed if splitindex is used.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-texcount:texlive-texcount-doc)
+#. summary(texlive-specs-l:texlive-imakeidx-doc)
#, fuzzy
-msgid "Documentation for texlive-texcount"
+msgid "Documentation for texlive-imakeidx"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texdef:texlive-texdef-doc)
+#. description(texlive-specs-l:texlive-imakeidx-doc)
#, fuzzy
-msgid "Documentation for texlive-texdef"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-imakeidx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texdiff:texlive-texdiff-doc)
-#, fuzzy
-msgid "Documentation for texlive-texdiff"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-impatient)
+#. summary(texlive-specs-l:texlive-impatient-fr)
+msgid "Free edition of the book \"TeX for the Impatient\""
+msgstr ""
-#. summary(texlive-texdirflatten:texlive-texdirflatten-doc)
-#, fuzzy
-msgid "Documentation for texlive-texdirflatten"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-impatient)
+#. description(texlive-specs-l:texlive-impatient-fr)
+msgid ""
+"\"TeX for the Impatient\" is a book (of around 350 pages) on TeX, Plain TeX and Eplain. The book is also available in French translation.\n"
+"\n"
+"date: 2011-10-01 09:40:11 +0000"
+msgstr ""
-#. summary(texlive-texdoc:texlive-texdoc-doc)
-#, fuzzy
-msgid "Documentation for texlive-texdoc"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-impnattypo)
+msgid "Support typography of l'Imprimerie Nationale FranASSaise"
+msgstr ""
-#. summary(texlive-texdraw:texlive-texdraw-doc)
-#, fuzzy
-msgid "Documentation for texlive-texdraw"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-impnattypo)
+msgid ""
+"The package provides useful macros implementing recommendations by the French Imprimerie Nationale.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-texliveonfly:texlive-texliveonfly-doc)
+#. summary(texlive-specs-l:texlive-impnattypo-doc)
#, fuzzy
-msgid "Documentation for texlive-texliveonfly"
+msgid "Documentation for texlive-impnattypo"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texloganalyser:texlive-texloganalyser-doc)
+#. description(texlive-specs-l:texlive-impnattypo-doc)
#, fuzzy
-msgid "Documentation for texlive-texloganalyser"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-impnattypo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texmate:texlive-texmate-doc)
-#, fuzzy
-msgid "Documentation for texlive-texmate"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-import)
+msgid "Establish input relative to a directory"
+msgstr ""
-#. summary(texlive-texments:texlive-texments-doc)
-#, fuzzy
-msgid "Documentation for texlive-texments"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-import)
+msgid ""
+"The commands \\import{full_path}{file} and \\subimport{path_extension}{file} set up input through standard LaTeX mechanisms (\\input, \\include and \\includegraphics) to load files relative to the \\import-ed directory. There are also \\includefrom, \\subincludefrom, and * variants of the commands.\n"
+"\n"
+"date: 2012-05-09 13:25:33 +0000"
+msgstr ""
-#. summary(texlive-texpower:texlive-texpower-doc)
+#. summary(texlive-specs-l:texlive-import-doc)
#, fuzzy
-msgid "Documentation for texlive-texpower"
+msgid "Documentation for texlive-import"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texshade:texlive-texshade-doc)
+#. description(texlive-specs-l:texlive-import-doc)
#, fuzzy
-msgid "Documentation for texlive-texshade"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-import"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texsis:texlive-texsis-doc)
-#, fuzzy
-msgid "Documentation for texlive-texsis"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-imsproc)
+msgid "Typeset IMS conference proceedings"
+msgstr ""
-#. summary(texlive-textcase:texlive-textcase-doc)
+#. description(texlive-specs-l:texlive-imsproc)
+msgid ""
+"The class typesets papers for IMS (Iranian Mathematical Society) conference proceedings. The class uses the XePersian package.\n"
+"\n"
+"date: 2014-04-29 04:13:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-imsproc-doc)
#, fuzzy
-msgid "Documentation for texlive-textcase"
+msgid "Documentation for texlive-imsproc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-textfit:texlive-textfit-doc)
+#. description(texlive-specs-l:texlive-imsproc-doc)
#, fuzzy
-msgid "Documentation for texlive-textfit"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-imsproc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-textglos:texlive-textglos-doc)
-msgid "Documentation for texlive-textglos"
+#. summary(texlive-specs-l:texlive-imtekda)
+msgid "IMTEK thesis class"
msgstr ""
-#. summary(texlive-textgreek:texlive-textgreek-doc)
-#, fuzzy
-msgid "Documentation for texlive-textgreek"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-imtekda)
+msgid ""
+"The class permits typesetting of diploma, bachelor's and master's theses for the Institute of Microsystem Technology (IMTEK) at the University of Freiburg (Germany). The class is based on the KOMA-Script class scrbook. Included in the documentation is a large collection of useful tips for typesetting theses and a list of recommended packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-textmerg:texlive-textmerg-doc)
+#. summary(texlive-specs-l:texlive-imtekda-doc)
#, fuzzy
-msgid "Documentation for texlive-textmerg"
+msgid "Documentation for texlive-imtekda"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-textopo:texlive-textopo-doc)
+#. description(texlive-specs-l:texlive-imtekda-doc)
#, fuzzy
-msgid "Documentation for texlive-textopo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-imtekda"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-textpath:texlive-textpath-doc)
+#. summary(texlive-specs-l:texlive-incgraph)
+msgid "Sophisticated graphics inclusion in a PDF document"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-incgraph)
+msgid ""
+"The package provides tools for including graphics at the full size of the output medium, or for creating \"pages\" whose size is that of the graphic they contain. A principal use case is documents that require inclusion of (potentially many) scans or photographs. Bookmarking is especially supported. The tool box has basic macros and a 'convenience' user interface that wraps \\includegraphics\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-incgraph-doc)
#, fuzzy
-msgid "Documentation for texlive-textpath"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-incgraph"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-textpos:texlive-textpos-doc)
+#. description(texlive-specs-l:texlive-incgraph-doc)
#, fuzzy
-msgid "Documentation for texlive-textpos"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-incgraph"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tfrupee:texlive-tfrupee-doc)
+#. summary(texlive-specs-l:texlive-inconsolata)
+msgid "A monospaced font, with support files for use with TeX"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-inconsolata)
+msgid ""
+"Inconsolata is a monospaced font designed by Raph Levien. This package contains the font (in both Adobe Type 1 and OpenType formats) in regular and bold weights, with additional glyphs and options to control slashed zero, upright quotes and a shapelier lower-case L, plus metric files for use with TeX, and LaTeX font definition and other relevant files.\n"
+"\n"
+"date: 2014-05-08 13:40:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-inconsolata-doc)
#, fuzzy
-msgid "Documentation for texlive-tfrupee"
+msgid "Documentation for texlive-inconsolata"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-theoremref:texlive-theoremref-doc)
+#. description(texlive-specs-l:texlive-inconsolata-doc)
#, fuzzy
-msgid "Documentation for texlive-theoremref"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-inconsolata"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-thesis-titlepage-fhac:texlive-thesis-titlepage-fhac-doc)
+#. summary(texlive-specs-l:texlive-inconsolata-fonts)
+msgid "Severed fonts for texlive-inconsolata"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-inconsolata-fonts)
+msgid "The separated fonts package for texlive-inconsolata"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-index)
+msgid "Extended index for LaTeX including multiple indexes"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-index)
+msgid ""
+"This is a reimplementation of LaTeX's indexing macros to provide better support for indexing. For example, it supports multiple indexes in a single document and provides a more robust \\index command. It supplies short hand notations for the \\index command (^{word}) and a * variation of \\index (abbreviated _{word}) that prints the word being indexed, as well as creating an index entry for it.\n"
+"\n"
+"date: 2012-06-03 11:48:34 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-index-doc)
#, fuzzy
-msgid "Documentation for texlive-thesis-titlepage-fhac"
+msgid "Documentation for texlive-index"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-thinsp:texlive-thinsp-doc)
+#. description(texlive-specs-l:texlive-index-doc)
#, fuzzy
-msgid "Documentation for texlive-thinsp"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-index"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-thmbox:texlive-thmbox-doc)
+#. summary(texlive-specs-l:texlive-initials)
+msgid "Adobe Type 1 decorative initial fonts"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-initials)
+msgid ""
+"For each font, at least an .pfb and .tfm file is provided, with a .fd file for use with LaTeX.\n"
+"\n"
+"date: 2014-05-08 13:40:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-initials-doc)
#, fuzzy
-msgid "Documentation for texlive-thmbox"
+msgid "Documentation for texlive-initials"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-thmtools:texlive-thmtools-doc)
+#. description(texlive-specs-l:texlive-initials-doc)
#, fuzzy
-msgid "Documentation for texlive-thmtools"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-initials"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-threadcol:texlive-threadcol-doc)
-msgid "Documentation for texlive-threadcol"
+#. summary(texlive-specs-l:texlive-initials-fonts)
+msgid "Severed fonts for texlive-initials"
msgstr ""
-#. summary(texlive-threeddice:texlive-threeddice-doc)
-#, fuzzy
-msgid "Documentation for texlive-threeddice"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-initials-fonts)
+msgid "The separated fonts package for texlive-initials"
+msgstr ""
-#. summary(texlive-threeparttable:texlive-threeparttable-doc)
+#. summary(texlive-specs-l:texlive-inlinebib)
+msgid "Citations in footnotes"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-inlinebib)
+msgid ""
+"A BibTeX style and a LaTeX package that allow for a full bibliography at the end of the document as well as citation details in footnotes. The footnote details include \"op. cit.\" and \"ibid.\" contractions.\n"
+"\n"
+"date: 2012-06-18 16:51:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-inlinebib-doc)
#, fuzzy
-msgid "Documentation for texlive-threeparttable"
+msgid "Documentation for texlive-inlinebib"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-threeparttablex:texlive-threeparttablex-doc)
+#. description(texlive-specs-l:texlive-inlinebib-doc)
#, fuzzy
-msgid "Documentation for texlive-threeparttablex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-inlinebib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-thumb:texlive-thumb-doc)
+#. summary(texlive-specs-l:texlive-inlinedef)
+msgid "Inline expansions within definitions"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-inlinedef)
+msgid ""
+"The package provides a macro \\Inline that precedes a \\def or \\gdef. Within the definition text of an inlined definition, keywords such as \\Expand may be used to selectively inline certain expansions at definition-time. This eases the process of redefining macros in terms of the original definition, as well as definitions in which the token that must be expanded is deep within, where \\expandafter would be difficult and \\edef is not suitable. Another application is as an easier version of \\aftergroup, by defining a macro in terms of expanded local variables, then ending the group with \\expandafter\\endgroup\\macro.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-inlinedef-doc)
#, fuzzy
-msgid "Documentation for texlive-thumb"
+msgid "Documentation for texlive-inlinedef"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-thumbpdf:texlive-thumbpdf-doc)
+#. description(texlive-specs-l:texlive-inlinedef-doc)
#, fuzzy
-msgid "Documentation for texlive-thumbpdf"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-inlinedef"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-thumbs:texlive-thumbs-doc)
+#. summary(texlive-specs-l:texlive-inputtrc)
+msgid "Trace which file loads which"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-inputtrc)
+msgid ""
+"The package produces screen/log messages of the form '<current> INPUTTING <next>' reporting LaTeX input commands (<current> and <next> being file names). The message is indented to reflect the level of input nesting. Tracing may be turned on and off, and the unit of indentation may be adjusted. The implementation somewhat resembles those of packages FiNK and inputfile.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-inputtrc-doc)
#, fuzzy
-msgid "Documentation for texlive-thumbs"
+msgid "Documentation for texlive-inputtrc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-thumby:texlive-thumby-doc)
+#. description(texlive-specs-l:texlive-inputtrc-doc)
#, fuzzy
-msgid "Documentation for texlive-thumby"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-inputtrc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-thuthesis:texlive-thuthesis-doc)
+#. summary(texlive-specs-l:texlive-insbox)
+msgid "A TeX macro for inserting pictures/boxes into paragraphs"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-insbox)
+msgid ""
+"The insbox package\n"
+"\n"
+"date: 2012-06-18 16:51:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-insbox-doc)
#, fuzzy
-msgid "Documentation for texlive-thuthesis"
+msgid "Documentation for texlive-insbox"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ticket:texlive-ticket-doc)
+#. description(texlive-specs-l:texlive-insbox-doc)
#, fuzzy
-msgid "Documentation for texlive-ticket"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-insbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikz-3dplot:texlive-tikz-3dplot-doc)
+#. summary(texlive-specs-l:texlive-interactiveworkbook)
+msgid "LaTeX-based interactive PDF on the Web"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-interactiveworkbook)
+msgid ""
+"The package interactiveworkbook gives the user the ability to write LaTeX documents which, ultimately, create interactive question-and-answer Portable Document Format (PDF) tutorials meant to be used by Internet students and that, in particular, freely use mathematical notation.\n"
+"\n"
+"date: 2012-07-16 14:30:40 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-interactiveworkbook-doc)
#, fuzzy
-msgid "Documentation for texlive-tikz-3dplot"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-interactiveworkbook"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-tikz-cd:texlive-tikz-cd-doc)
+#. description(texlive-specs-l:texlive-interactiveworkbook-doc)
#, fuzzy
-msgid "Documentation for texlive-tikz-cd"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-interactiveworkbook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikz-dependency:texlive-tikz-dependency-doc)
+#. summary(texlive-specs-l:texlive-interfaces)
+msgid "Set parameters for other packages, conveniently"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-interfaces)
+msgid ""
+"The package provides a small number of convenient macros that access features in other frequently-used packages, or provide interfaces to other useful facilities such as the pdfTeX \\pdfelapsedtime primitive. Most of these macros use pgfkeys to provide a key-value syntax. The package also uses the package scrlfile from the Koma-Script bundle (for controlled loading of other files) and etoolbox. The package is bundled with sub- packages containing actual interfaces: by default, the package loads all available sub-packages, but techniques are provided for the user to select no more than the interfaces needed for a job.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-interfaces-doc)
#, fuzzy
-msgid "Documentation for texlive-tikz-dependency"
+msgid "Documentation for texlive-interfaces"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tikz-inet:texlive-tikz-inet-doc)
+#. description(texlive-specs-l:texlive-interfaces-doc)
#, fuzzy
-msgid "Documentation for texlive-tikz-inet"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-interfaces"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikz-qtree:texlive-tikz-qtree-doc)
+#. summary(texlive-specs-l:texlive-interpreter)
+msgid "Translate input files on the fly"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-interpreter)
+msgid ""
+"The package preprocesses input files to a Lua(La)TeX run, on the fly. The user defines Lua regular expressions to search for patterns and modify input lines (or entire paragraphs) accordingly, before TeX reads the material. In this way, documents may be prepared in a non-TeX language (e.g., some lightweight markup language) and turned into 'proper' TeX for processing. The source of the documentation is typed in such a lightweight language and is thus easily readable in a text editor (the PDF file is also available, of course); the transformation to TeX syntax via Interpreter's functions is explained in the documentation itself. Interpreter is implemented using the author's gates (lua version), and works for plain TeX and LaTeX, but not ConTeXt.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-interpreter-doc)
#, fuzzy
-msgid "Documentation for texlive-tikz-qtree"
+msgid "Documentation for texlive-interpreter"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tikz-timing:texlive-tikz-timing-doc)
+#. description(texlive-specs-l:texlive-interpreter-doc)
#, fuzzy
-msgid "Documentation for texlive-tikz-timing"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-interpreter"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikzinclude:texlive-tikzinclude-doc)
-msgid "Documentation for texlive-tikzinclude"
+#. summary(texlive-specs-l:texlive-interval)
+msgid "Format mathematical intervals, ensuring proper spacing"
msgstr ""
-#. summary(texlive-tikzmark:texlive-tikzmark-doc)
-msgid "Documentation for texlive-tikzmark"
+#. description(texlive-specs-l:texlive-interval)
+msgid ""
+"When typing an open interval as $]a,b[$, a closing bracket is being used in place of an opening fence and vice versa. This leads to the wrong spacing in, say, $]-a,b[$ or $A\\in]a,b[=B$. The package attempts to solve this using: \\interval{a}{b} -> [a,b] \\interval[open]{a}{b} -> ]a,b[ \\interval[open left]{a}{b}\n"
+"-> ]a,b] The package also supports fence scaling and ensures that the enclosing fences will end up having the proper closing and opening types. TeX maths does not do this job properly.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tikzorbital:texlive-tikzorbital-doc)
-msgid "Documentation for texlive-tikzorbital"
-msgstr ""
-
-#. summary(texlive-tikzpagenodes:texlive-tikzpagenodes-doc)
+#. summary(texlive-specs-l:texlive-interval-doc)
#, fuzzy
-msgid "Documentation for texlive-tikzpagenodes"
+msgid "Documentation for texlive-interval"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tikzpfeile:texlive-tikzpfeile-doc)
+#. description(texlive-specs-l:texlive-interval-doc)
#, fuzzy
-msgid "Documentation for texlive-tikzpfeile"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-interval"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tikzposter:texlive-tikzposter-doc)
-msgid "Documentation for texlive-tikzposter"
+#. summary(texlive-specs-l:texlive-intro-scientific)
+msgid "Introducing scientific/mathematical documents using LaTeX"
msgstr ""
-#. summary(texlive-tikzscale:texlive-tikzscale-doc)
-msgid "Documentation for texlive-tikzscale"
+#. description(texlive-specs-l:texlive-intro-scientific)
+msgid ""
+"\"Writing Scientific Documents Using LaTeX\" is an article introducing the use of LaTeX in typesetting scientific documents. It covers the basics of creating a new LaTeX document, special typesetting considerations, mathematical typesetting and graphics. It also touches on bibliographic data and BibTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tikzsymbols:texlive-tikzsymbols-doc)
-msgid "Documentation for texlive-tikzsymbols"
+#. summary(texlive-specs-l:texlive-inversepath)
+msgid "Calculate inverse file paths"
msgstr ""
-#. summary(texlive-tipa:texlive-tipa-doc)
-#, fuzzy
-msgid "Documentation for texlive-tipa"
-msgstr "Dokumentace pro adaptx"
-
-#. summary(texlive-titlecaps:texlive-titlecaps-doc)
-msgid "Documentation for texlive-titlecaps"
+#. description(texlive-specs-l:texlive-inversepath)
+msgid ""
+"The package calculates inverse relative paths. Such things may be useful, for example, when writing an auxiliary file to a different directory.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-titlepic:texlive-titlepic-doc)
+#. summary(texlive-specs-l:texlive-inversepath-doc)
#, fuzzy
-msgid "Documentation for texlive-titlepic"
+msgid "Documentation for texlive-inversepath"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-titleref:texlive-titleref-doc)
+#. description(texlive-specs-l:texlive-inversepath-doc)
#, fuzzy
-msgid "Documentation for texlive-titleref"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-inversepath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-titlesec:texlive-titlesec-doc)
-#, fuzzy
-msgid "Documentation for texlive-titlesec"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-invoice)
+msgid "Generate invoices"
+msgstr "Generujte faktury"
-#. summary(texlive-titling:texlive-titling-doc)
-#, fuzzy
-msgid "Documentation for texlive-titling"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-invoice)
+msgid ""
+"The package may be used for generating invoices. The package can deal with invisible expense items and deductions; output may be presented in any of 10 different languages. The package depends on the fp and calc packages for its calculations.\n"
+"\n"
+"date: 2011-10-06 10:43:40 +0000"
+msgstr ""
-#. summary(texlive-tkz-base:texlive-tkz-base-doc)
+#. summary(texlive-specs-l:texlive-invoice-doc)
#, fuzzy
-msgid "Documentation for texlive-tkz-base"
+msgid "Documentation for texlive-invoice"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tkz-berge:texlive-tkz-berge-doc)
+#. description(texlive-specs-l:texlive-invoice-doc)
#, fuzzy
-msgid "Documentation for texlive-tkz-berge"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-invoice"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tkz-doc:texlive-tkz-doc-doc)
-#, fuzzy
-msgid "Documentation for texlive-tkz-doc"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ionumbers)
+msgid "Restyle numbers in maths mode"
+msgstr ""
-#. summary(texlive-tkz-euclide:texlive-tkz-euclide-doc)
-#, fuzzy
-msgid "Documentation for texlive-tkz-euclide"
-msgstr "Dokumentace pro gawk"
+#. description(texlive-specs-l:texlive-ionumbers)
+msgid ""
+"'ionumbers' stands for 'input/output numbers'. The package restyles numbers in maths mode. If a number in the input file is written, e.g., as $3,231.44$ as commonly used in English texts, the package is able to restyle it to be output as $3\\,231{,}44$ as commonly used in German texts (and vice versa). This may be useful, for example, if you have a large table and want to include it in texts with different output conventions without the need to change the table. The package can also automatically group digits left of the decimal separator (thousands) and right of the decimal separator (thousandths) in triplets without the need of specifing commas (English) or points (German) as separators. E.g., the input $1234.567890$ can be output as $1\\,234.\\,567\\,890$. Finally, an e starts the exponent of the number. For example, $21e6$ may be output as $26\\times10\\,^{6}$.\n"
+"\n"
+"date: 2014-04-15 18:08:53 +0000"
+msgstr ""
-#. summary(texlive-tkz-fct:texlive-tkz-fct-doc)
+#. summary(texlive-specs-l:texlive-ionumbers-doc)
#, fuzzy
-msgid "Documentation for texlive-tkz-fct"
+msgid "Documentation for texlive-ionumbers"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tkz-graph:texlive-tkz-graph-doc)
+#. description(texlive-specs-l:texlive-ionumbers-doc)
#, fuzzy
-msgid "Documentation for texlive-tkz-graph"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-ionumbers"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tkz-kiviat:texlive-tkz-kiviat-doc)
-#, fuzzy
-msgid "Documentation for texlive-tkz-kiviat"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-iopart-num)
+msgid "Numeric citation style for IOP journals"
+msgstr ""
-#. summary(texlive-tkz-linknodes:texlive-tkz-linknodes-doc)
-#, fuzzy
-msgid "Documentation for texlive-tkz-linknodes"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iopart-num)
+msgid ""
+"A BibTeX style providing numeric citation in Harvard-like format. Intended for use with Institute of Physics (IOP) journals, including Journal of Physics.\n"
+"\n"
+"date: 2012-04-09 10:10:14 +0000"
+msgstr ""
-#. summary(texlive-tkz-orm:texlive-tkz-orm-doc)
+#. summary(texlive-specs-l:texlive-iopart-num-doc)
#, fuzzy
-msgid "Documentation for texlive-tkz-orm"
+msgid "Documentation for texlive-iopart-num"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tkz-tab:texlive-tkz-tab-doc)
+#. description(texlive-specs-l:texlive-iopart-num-doc)
#, fuzzy
-msgid "Documentation for texlive-tkz-tab"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-iopart-num"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tocbibind:texlive-tocbibind-doc)
-#, fuzzy
-msgid "Documentation for texlive-tocbibind"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ipaex)
+msgid "IPA and IPAex fonts from Information-technology Promotion Agency, Japan"
+msgstr ""
-#. summary(texlive-tocloft:texlive-tocloft-doc)
-#, fuzzy
-msgid "Documentation for texlive-tocloft"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-ipaex)
+msgid ""
+"The fonts provide fixed-width glyphs for Kana and Kanji characters, proportional width glyphs for Western characters.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-tocvsec2:texlive-tocvsec2-doc)
+#. summary(texlive-specs-l:texlive-ipaex-doc)
#, fuzzy
-msgid "Documentation for texlive-tocvsec2"
+msgid "Documentation for texlive-ipaex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-todo:texlive-todo-doc)
+#. description(texlive-specs-l:texlive-ipaex-doc)
#, fuzzy
-msgid "Documentation for texlive-todo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ipaex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-todonotes:texlive-todonotes-doc)
-#, fuzzy
-msgid "Documentation for texlive-todonotes"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ipaex-fonts)
+msgid "Severed fonts for texlive-ipaex"
+msgstr ""
-#. summary(texlive-tokenizer:texlive-tokenizer-doc)
-#, fuzzy
-msgid "Documentation for texlive-tokenizer"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-ipaex-fonts)
+msgid "The separated fonts package for texlive-ipaex"
+msgstr ""
-#. summary(texlive-toolbox:texlive-toolbox-doc)
-#, fuzzy
-msgid "Documentation for texlive-toolbox"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-ipaex-type1)
+msgid "IPAex fonts converted to Type-1 format Unicode subfonts"
+msgstr ""
-#. summary(texlive-tools:texlive-tools-doc)
-#, fuzzy
-msgid "Documentation for texlive-tools"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-ipaex-type1)
+msgid ""
+"The package contains the IPAex Fonts converted into Unicode subfonts in Type1 format, which is most suitable for use with the CJK package. Font conversion was done with ttf2pt1.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-topfloat:texlive-topfloat-doc)
+#. summary(texlive-specs-l:texlive-ipaex-type1-doc)
#, fuzzy
-msgid "Documentation for texlive-topfloat"
+msgid "Documentation for texlive-ipaex-type1"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-toptesi:texlive-toptesi-doc)
+#. description(texlive-specs-l:texlive-ipaex-type1-doc)
#, fuzzy
-msgid "Documentation for texlive-toptesi"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-ipaex-type1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-totcount:texlive-totcount-doc)
+#. summary(texlive-specs-l:texlive-ipaex-type1-fonts)
#, fuzzy
-msgid "Documentation for texlive-totcount"
+msgid "Severed fonts for texlive-ipaex-type1"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-totpages:texlive-totpages-doc)
+#. description(texlive-specs-l:texlive-ipaex-type1-fonts)
#, fuzzy
-msgid "Documentation for texlive-totpages"
-msgstr "Dokumentace pro adaptx"
+msgid "The separated fonts package for texlive-ipaex-type1"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-tpslifonts:texlive-tpslifonts-doc)
-#, fuzzy
-msgid "Documentation for texlive-tpslifonts"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-iso)
+msgid "Generic ISO standards typesetting macros"
+msgstr ""
-#. summary(texlive-tqft:texlive-tqft-doc)
-#, fuzzy
-msgid "Documentation for texlive-tqft"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iso)
+msgid ""
+"Generic class and package files for typesetting ISO International Standard documents. Several standard documents have been printed by ISO from camera-ready copy prepared using LaTeX and these files. The class makes use of the isorot package, rather than use other mechanisms directly.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-trajan:texlive-trajan-doc)
+#. summary(texlive-specs-l:texlive-iso-doc)
#, fuzzy
-msgid "Documentation for texlive-trajan"
+msgid "Documentation for texlive-iso"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tram:texlive-tram-doc)
+#. description(texlive-specs-l:texlive-iso-doc)
#, fuzzy
-msgid "Documentation for texlive-tram"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-iso"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tree-dvips:texlive-tree-dvips-doc)
-#, fuzzy
-msgid "Documentation for texlive-tree-dvips"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-iso10303)
+msgid "Typesetting the STEP standards"
+msgstr ""
-#. summary(texlive-treetex:texlive-treetex-doc)
-#, fuzzy
-msgid "Documentation for texlive-treetex"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iso10303)
+msgid ""
+"Class and package files building on iso for typesetting the ISO 10303 (STEP) standards. Standard documents prepared using these packages have been published by ISO.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-trfsigns:texlive-trfsigns-doc)
+#. summary(texlive-specs-l:texlive-iso10303-doc)
#, fuzzy
-msgid "Documentation for texlive-trfsigns"
+msgid "Documentation for texlive-iso10303"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-trimspaces:texlive-trimspaces-doc)
+#. description(texlive-specs-l:texlive-iso10303-doc)
#, fuzzy
-msgid "Documentation for texlive-trimspaces"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-iso10303"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-trivfloat:texlive-trivfloat-doc)
-#, fuzzy
-msgid "Documentation for texlive-trivfloat"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-isodate)
+msgid "Tune the output format of dates according to language"
+msgstr ""
-#. summary(texlive-trsym:texlive-trsym-doc)
+#. description(texlive-specs-l:texlive-isodate)
+msgid ""
+"This package provides ten output formats of the commands \\today, \\printdate, \\printdateTeX, and \\daterange (partly language dependent). Formats available are: ISO (yyyy-mm-dd), numeric (e.g. dd.\\,mm.~yyyy), short (e.g. dd.\\,mm.\\,yy), TeX (yyyy/mm/dd), original (e.g. dd. mmm yyyy), short original (e.g. dd. mmm yy), as well as numerical formats with Roman numerals for the month. The commands \\printdate and \\printdateTeX print any date. The command \\daterange prints a date range and leaves out unnecessary year or month entries. This package supports German (old and new rules), Austrian, US English, British English, French, Danish, Swedish, and Norwegian.\n"
+"\n"
+"date: 2012-06-10 22:09:45 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-isodate-doc)
#, fuzzy
-msgid "Documentation for texlive-trsym"
+msgid "Documentation for texlive-isodate"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-truncate:texlive-truncate-doc)
+#. description(texlive-specs-l:texlive-isodate-doc)
#, fuzzy
-msgid "Documentation for texlive-truncate"
-msgstr "Dokumentace pro gawk"
+msgid "This package includes the documentation for texlive-isodate"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ttfutils:texlive-ttfutils-doc)
+#. summary(texlive-specs-l:texlive-isodoc)
#, fuzzy
-msgid "Documentation for texlive-ttfutils"
-msgstr "Dokumentace pro adaptx"
+msgid "A LaTeX class for typesetting letters and invoices"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. summary(texlive-tucv:texlive-tucv-doc)
-#, fuzzy
-msgid "Documentation for texlive-tucv"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-isodoc)
+msgid ""
+"The isodoc class can be used for the preparation of letters and invoices (and, in the future, similar documents). Documents are set up with options, thus making the class easily adaptable to user's wishes and extensible for other document types. The class is based on the NTG brief class by Victor Eijkhout, which implements the NEN1026 standard.\n"
+"\n"
+"date: 2014-04-25 13:16:15 +0000"
+msgstr ""
-#. summary(texlive-tufte-latex:texlive-tufte-latex-doc)
+#. summary(texlive-specs-l:texlive-isodoc-doc)
#, fuzzy
-msgid "Documentation for texlive-tufte-latex"
+msgid "Documentation for texlive-isodoc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tugboat:texlive-tugboat-doc)
+#. description(texlive-specs-l:texlive-isodoc-doc)
#, fuzzy
-msgid "Documentation for texlive-tugboat"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-isodoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tugboat-plain:texlive-tugboat-plain-doc)
-#, fuzzy
-msgid "Documentation for texlive-tugboat-plain"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-isomath)
+msgid "Mathematics style for science and technology"
+msgstr ""
-#. summary(texlive-tui:texlive-tui-doc)
-#, fuzzy
-msgid "Documentation for texlive-tui"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-isomath)
+msgid ""
+"The package provides tools for a mathematical style that conforms to the International Standard ISO 80000-2 and is common in science and technology. It changes the default shape of capital Greek letters to italic, sets up bold italic and sans-serif bold italic math alphabets with Latin and Greek characters, and defines macros for markup of vector, matrix and tensor symbols.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-turkmen:texlive-turkmen-doc)
+#. summary(texlive-specs-l:texlive-isomath-doc)
#, fuzzy
-msgid "Documentation for texlive-turkmen"
+msgid "Documentation for texlive-isomath"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-turnstile:texlive-turnstile-doc)
+#. description(texlive-specs-l:texlive-isomath-doc)
#, fuzzy
-msgid "Documentation for texlive-turnstile"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-isomath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-turnthepage:texlive-turnthepage-doc)
-#, fuzzy
-msgid "Documentation for texlive-turnthepage"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-isonums)
+msgid "Display numbers in maths mode according to ISO 31-0"
+msgstr ""
-#. summary(texlive-twoinone:texlive-twoinone-doc)
+#. description(texlive-specs-l:texlive-isonums)
+msgid ""
+"The package makes a quick hack to ziffer to display numbers in maths mode according to ISO 31-0, regardless of input format (European $1.235,7$ or Anglo-American $1,235.7$). The options [euro, anglo] control the global input format. Default input format is anglo. Documentation is included as comments to the text source.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-isonums-doc)
#, fuzzy
-msgid "Documentation for texlive-twoinone"
+msgid "Documentation for texlive-isonums"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-twoup:texlive-twoup-doc)
+#. description(texlive-specs-l:texlive-isonums-doc)
#, fuzzy
-msgid "Documentation for texlive-twoup"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-isonums"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-txfonts:texlive-txfonts-doc)
+#. summary(texlive-specs-l:texlive-isorot)
+msgid "Rotation of document elements"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-isorot)
+msgid ""
+"The package is for rotation of document elements. It is a combination of the lscape package and an extension of the rotating package. The package is designed for use with the iso class but may be used with any normal class.\n"
+"\n"
+"date: 2012-06-23 17:30:01 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-isorot-doc)
#, fuzzy
-msgid "Documentation for texlive-txfonts"
+msgid "Documentation for texlive-isorot"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-txfontsb:texlive-txfontsb-doc)
+#. description(texlive-specs-l:texlive-isorot-doc)
#, fuzzy
-msgid "Documentation for texlive-txfontsb"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-isorot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-txgreeks:texlive-txgreeks-doc)
+#. summary(texlive-specs-l:texlive-isotope)
+msgid "A package for typesetting isotopes"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-isotope)
+msgid ""
+"The package provides a command \\isotope for setting the atomic weight and atomic number indications of isotopes. (The naive way of doing the job with (La)TeX mathematics commands produces an unsatisfactory result.)\n"
+"\n"
+"date: 2012-06-23 17:30:01 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-isotope-doc)
#, fuzzy
-msgid "Documentation for texlive-txgreeks"
+msgid "Documentation for texlive-isotope"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-type1cm:texlive-type1cm-doc)
+#. description(texlive-specs-l:texlive-isotope-doc)
#, fuzzy
-msgid "Documentation for texlive-type1cm"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-isotope"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-typeface:texlive-typeface-doc)
-msgid "Documentation for texlive-typeface"
+#. summary(texlive-specs-l:texlive-issuulinks)
+msgid "Produce external links instead of internal ones"
msgstr ""
-#. summary(texlive-typehtml:texlive-typehtml-doc)
+#. description(texlive-specs-l:texlive-issuulinks)
+msgid ""
+"The PDF visualizer http://issuu.com/ISSUU is a popular service which shows PDF documents \"a page a time\". Due to the way it is implemented, internal links in these documents are not allowed. Instead, they must be converted to external ones in the form http://issuu.com/action/page?page=PAGENUMBER. The package patches hyperref to produce external links in the required form instead of internal links created by \\ref, \\cite and other commands. Since the package redefines the internals of hyperref, it must be loaded it AFTER hyperref.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-issuulinks-doc)
#, fuzzy
-msgid "Documentation for texlive-typehtml"
+msgid "Documentation for texlive-issuulinks"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-typeoutfileinfo:texlive-typeoutfileinfo-doc)
+#. description(texlive-specs-l:texlive-issuulinks-doc)
#, fuzzy
-msgid "Documentation for texlive-typeoutfileinfo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-issuulinks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-typogrid:texlive-typogrid-doc)
+#. summary(texlive-specs-l:texlive-itnumpar)
+msgid "Spell numbers in words (Italian)"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-itnumpar)
+msgid ""
+"Sometimes we need to say \"Capitolo primo\" or \"Capitolo uno\" instead of \"Capitolo 1\", that is, spelling the number in words instead of the usual digit form. This package provides support for spelling out numbers in Italian words, both in cardinal and in ordinal form.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-itnumpar-doc)
#, fuzzy
-msgid "Documentation for texlive-typogrid"
+msgid "Documentation for texlive-itnumpar"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uaclasses:texlive-uaclasses-doc)
+#. description(texlive-specs-l:texlive-itnumpar-doc)
#, fuzzy
-msgid "Documentation for texlive-uaclasses"
-msgstr "HTML dokumentace pro GNU C Library"
+msgid "This package includes the documentation for texlive-itnumpar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uadocs:texlive-uadocs-doc)
-msgid "Documentation for texlive-uadocs"
+#. summary(texlive-specs-l:texlive-iwhdp)
+msgid "Halle Institute for Economic Research (IWH) Discussion Papers"
msgstr ""
-#. summary(texlive-uafthesis:texlive-uafthesis-doc)
+#. description(texlive-specs-l:texlive-iwhdp)
+msgid ""
+"The document class is for creating Discussion Papers of the Halle Institute for Economic Research (IWH) in Halle, Germany. The class offers options for both English and German texts.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-iwhdp-doc)
#, fuzzy
-msgid "Documentation for texlive-uafthesis"
+msgid "Documentation for texlive-iwhdp"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ucdavisthesis:texlive-ucdavisthesis-doc)
+#. description(texlive-specs-l:texlive-iwhdp-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-ucdavisthesis"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-iwhdp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ucharclasses:texlive-ucharclasses-doc)
-msgid "Documentation for texlive-ucharclasses"
+#. summary(texlive-specs-l:texlive-iwona)
+msgid "A two-element sans-serif font"
msgstr ""
-#. summary(texlive-ucs:texlive-ucs-doc)
-#, fuzzy
-msgid "Documentation for texlive-ucs"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iwona)
+msgid ""
+"Iwona is a two-element sans-serif typeface. It was created as an alternative version of the Kurier typeface, which was designed in 1975 for a diploma in typeface design at the Warsaw Academy of Fine Arts under the supervision of Roman Tomaszewski. This distribution contains a significantly extended set of characters covering the following modern alphabets: latin (including Vietnamese), Cyrillic and Greek as well as a number of additional symbols (including mathematical symbols). The fonts are prepared in Type 1 and OpenType formats. For use with TeX the following encoding files have been prepared: T1 (ec), T2 (abc), and OT2--Cyrillic, T5 (Vietnamese), OT4, QX, texansi and nonstandard (IL2 for the Czech fonts), as well as supporting macros and files defining fonts for LaTeX.\n"
+"\n"
+"date: 2014-05-08 22:43:11 +0000"
+msgstr ""
-#. summary(texlive-ucthesis:texlive-ucthesis-doc)
+#. summary(texlive-specs-l:texlive-iwona-doc)
#, fuzzy
-msgid "Documentation for texlive-ucthesis"
+msgid "Documentation for texlive-iwona"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uebungsblatt:texlive-uebungsblatt-doc)
+#. description(texlive-specs-l:texlive-iwona-doc)
#, fuzzy
-msgid "Documentation for texlive-uebungsblatt"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-iwona"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uestcthesis:texlive-uestcthesis-doc)
-msgid "Documentation for texlive-uestcthesis"
+#. summary(texlive-specs-l:texlive-iwona-fonts)
+msgid "Severed fonts for texlive-iwona"
msgstr ""
-#. summary(texlive-uhc:texlive-uhc-doc)
-#, fuzzy
-msgid "Documentation for texlive-uhc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-iwona-fonts)
+msgid "The separated fonts package for texlive-iwona"
+msgstr ""
-#. summary(texlive-uiucredborder:texlive-uiucredborder-doc)
-msgid "Documentation for texlive-uiucredborder"
+#. summary(texlive-specs-l:texlive-jablantile)
+msgid "Metafont version of tiles in the style of Slavik Jablan"
msgstr ""
-#. summary(texlive-uiucthesis:texlive-uiucthesis-doc)
+#. description(texlive-specs-l:texlive-jablantile)
+msgid ""
+"This is a small Metafont font to implement the modular tiles described by Slavik Jablan. For an outline of the theoretical structure of the tiles, see (for example) Jablan's JMM 2006 Exhibit.\n"
+"\n"
+"date: 2014-05-08 22:43:11 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jablantile-doc)
#, fuzzy
-msgid "Documentation for texlive-uiucthesis"
+msgid "Documentation for texlive-jablantile"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ukrhyph:texlive-ukrhyph-doc)
+#. description(texlive-specs-l:texlive-jablantile-doc)
#, fuzzy
-msgid "Documentation for texlive-ukrhyph"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jablantile"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ulem:texlive-ulem-doc)
+#. summary(texlive-specs-l:texlive-jadetex)
+msgid "Macros supporting Jade DSSSL output"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-jadetex)
+msgid ""
+"Macro package on top of LaTeX to typeset TeX output of the Jade DSSSL implementation.\n"
+"\n"
+"date: 2012-06-23 17:46:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jadetex-doc)
#, fuzzy
-msgid "Documentation for texlive-ulem"
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-jadetex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ulqda:texlive-ulqda-doc)
+#. description(texlive-specs-l:texlive-jadetex-doc)
#, fuzzy
-msgid "Documentation for texlive-ulqda"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jadetex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ulthese:texlive-ulthese-doc)
-msgid "Documentation for texlive-ulthese"
+#. summary(texlive-specs-l:texlive-jamtimes)
+msgid "Expanded Times Roman fonts"
msgstr ""
-#. summary(texlive-umich-thesis:texlive-umich-thesis-doc)
-#, fuzzy
-msgid "Documentation for texlive-umich-thesis"
-msgstr "Dokumentace pro castor"
+#. description(texlive-specs-l:texlive-jamtimes)
+msgid ""
+"The package offers LaTeX support for the expanded Times Roman font, which has been used for many years in the Journal d'Analyse Mathematique. Mathematics support is based on the Belleek fonts.\n"
+"\n"
+"date: 2009-11-07 09:52:42 +0000"
+msgstr ""
-#. summary(texlive-uml:texlive-uml-doc)
+#. summary(texlive-specs-l:texlive-jamtimes-doc)
#, fuzzy
-msgid "Documentation for texlive-uml"
+msgid "Documentation for texlive-jamtimes"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-umlaute:texlive-umlaute-doc)
+#. description(texlive-specs-l:texlive-jamtimes-doc)
#, fuzzy
-msgid "Documentation for texlive-umlaute"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jamtimes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-umoline:texlive-umoline-doc)
-#, fuzzy
-msgid "Documentation for texlive-umoline"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-japanese)
+msgid "A substitute for a babel package for Japanese"
+msgstr ""
-#. summary(texlive-umthesis:texlive-umthesis-doc)
-#, fuzzy
-msgid "Documentation for texlive-umthesis"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-japanese)
+msgid ""
+"The package behaves in a similar way as if you provided the (non-existent) Japanese option to babel so that you can handle Japanese language text in LaTeX documents. The package requires a Japanese-enabled TeX system, such as pTeX or jTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-unamthesis:texlive-unamthesis-doc)
+#. summary(texlive-specs-l:texlive-japanese-doc)
#, fuzzy
-msgid "Documentation for texlive-unamthesis"
+msgid "Documentation for texlive-japanese"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-underlin:texlive-underlin-doc)
+#. description(texlive-specs-l:texlive-japanese-doc)
#, fuzzy
-msgid "Documentation for texlive-underlin"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-japanese"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-underoverlap:texlive-underoverlap-doc)
-msgid "Documentation for texlive-underoverlap"
+#. summary(texlive-specs-l:texlive-japanese-otf)
+msgid "Advanced font selection for platex and its friends"
msgstr ""
-#. summary(texlive-underscore:texlive-underscore-doc)
-#, fuzzy
-msgid "Documentation for texlive-underscore"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-japanese-otf)
+msgid ""
+"The package contains pLaTeX support files and virtual fonts for supporting a wide variety of fonts in LaTeX using the pTeX engine.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-undolabl:texlive-undolabl-doc)
+#. summary(texlive-specs-l:texlive-japanese-otf-doc)
#, fuzzy
-msgid "Documentation for texlive-undolabl"
+msgid "Documentation for texlive-japanese-otf"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uni-wtal-ger:texlive-uni-wtal-ger-doc)
+#. description(texlive-specs-l:texlive-japanese-otf-doc)
#, fuzzy
-msgid "Documentation for texlive-uni-wtal-ger"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-japanese-otf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uni-wtal-lin:texlive-uni-wtal-lin-doc)
-msgid "Documentation for texlive-uni-wtal-lin"
+#. summary(texlive-specs-l:texlive-japanese-otf-uptex)
+msgid "Support for Japanese OTF files in upLaTeX"
msgstr ""
-#. summary(texlive-unicode-math:texlive-unicode-math-doc)
+#. description(texlive-specs-l:texlive-japanese-otf-uptex)
+msgid ""
+"The bundle offers support of the fonts in the japanese-otf package, for use with the UpTeX distribution (version 0.20 or later).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-japanese-otf-uptex-doc)
#, fuzzy
-msgid "Documentation for texlive-unicode-math"
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-japanese-otf-uptex"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-unisugar:texlive-unisugar-doc)
+#. description(texlive-specs-l:texlive-japanese-otf-uptex-doc)
#, fuzzy
-msgid "Documentation for texlive-unisugar"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-japanese-otf-uptex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-units:texlive-units-doc)
+#. summary(texlive-specs-l:texlive-jfontmaps)
+msgid "Font maps and configuration tools for Japanese fonts"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-jfontmaps)
+msgid ""
+"The package offers font maps, and supporting material, that make various Japanese fonts available to users of (u)ptex and related programs or formats. The package does not ship any of the fonts mentioned in the documentation, but only map files for use with dvipdfmx; the user must obtain the other fonts separately. The first exception is that ipa and ipaex the respective fonts a shipped as part of the TeX Live distribution and are available for free. The other exception is that the Yu Mincho/Gothic fonts are available to Windows and MacOSX users, as part of their operating system distribution.\n"
+"\n"
+"date: 2014-05-08 22:43:11 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jfontmaps-doc)
#, fuzzy
-msgid "Documentation for texlive-units"
+msgid "Documentation for texlive-jfontmaps"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-unitsdef:texlive-unitsdef-doc)
+#. description(texlive-specs-l:texlive-jfontmaps-doc)
#, fuzzy
-msgid "Documentation for texlive-unitsdef"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jfontmaps"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-universa:texlive-universa-doc)
+#. summary(texlive-specs-l:texlive-jknapltx)
#, fuzzy
-msgid "Documentation for texlive-universa"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "Miscellaneous packages by Joerg Knappen"
+msgstr "Různé"
-#. summary(texlive-unswcover:texlive-unswcover-doc)
-msgid "Documentation for texlive-unswcover"
+#. description(texlive-specs-l:texlive-jknapltx)
+msgid ""
+"Miscellaneous macros by Jorg Knappen, including: represent counters in greek; Maxwell's non-commutative division; latin1jk, latin2jk and latin3jk, which are their inputenc definition files that allow verbatim input in the respective ISO Latin codes; blackboard bold fonts in maths; use of RSFS fonts in maths; extra alignments for \\parboxes; swap Roman and Sans fonts; transliterate semitic languages; patches to make (La)TeX formulae embeddable in SGML; use maths \"minus\" in text as appropriate; simple Young tableaux.\n"
+"\n"
+"date: 2014-01-03 21:58:53 +0000"
msgstr ""
-#. summary(texlive-uothesis:texlive-uothesis-doc)
+#. summary(texlive-specs-l:texlive-jknapltx-doc)
#, fuzzy
-msgid "Documentation for texlive-uothesis"
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-jknapltx"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uowthesis:texlive-uowthesis-doc)
+#. description(texlive-specs-l:texlive-jknapltx-doc)
#, fuzzy
-msgid "Documentation for texlive-uowthesis"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jknapltx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-upca:texlive-upca-doc)
-#, fuzzy
-msgid "Documentation for texlive-upca"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-jlabels)
+msgid "Make letter-sized pages of labels"
+msgstr ""
-#. summary(texlive-upmethodology:texlive-upmethodology-doc)
+#. description(texlive-specs-l:texlive-jlabels)
+msgid ""
+"The package provides controls for the numbers of rows and columns.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jlabels-doc)
#, fuzzy
-msgid "Documentation for texlive-upmethodology"
+msgid "Documentation for texlive-jlabels"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-upquote:texlive-upquote-doc)
+#. description(texlive-specs-l:texlive-jlabels-doc)
#, fuzzy
-msgid "Documentation for texlive-upquote"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jlabels"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uptex:texlive-uptex-doc)
-msgid "Documentation for texlive-uptex"
+#. summary(texlive-specs-l:texlive-jmlr)
+msgid "Class files for the Journal of Machine Learning Research"
msgstr ""
-#. summary(texlive-uri:texlive-uri-doc)
-#, fuzzy
-msgid "Documentation for texlive-uri"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-jmlr)
+msgid ""
+"The jmlr bundle provides a class for authors (jmlr) and a class for production editors (jmlrbook), as well as a script makejmlrbook The jmlrbook class may can be used to combine articles written using the jmlr class into a book. The class uses the combine class and the hyperref package to produce either a colour hyperlinked book for on-line viewing or a greyscale nonhyperlinked book for printing. The makejmlrbook Perl script can be used to create the colour hyperlinked and greyscale nonhyperlinked PDFs of a document using the jmlrbook class. It can also create a set of HTML files that list the included papers with links to their abstracts and the individual articles as PDFs.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-url:texlive-url-doc)
+#. summary(texlive-specs-l:texlive-jmlr-doc)
#, fuzzy
-msgid "Documentation for texlive-url"
+msgid "Documentation for texlive-jmlr"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-urlbst:texlive-urlbst-doc)
+#. description(texlive-specs-l:texlive-jmlr-doc)
#, fuzzy
-msgid "Documentation for texlive-urlbst"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jmlr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-urwchancal:texlive-urwchancal-doc)
-#, fuzzy
-msgid "Documentation for texlive-urwchancal"
-msgstr "HTML dokumentace pro GNU C Library"
+#. summary(texlive-specs-l:texlive-jmn)
+msgid "Package jmn"
+msgstr "Balíček jmn"
-#. summary(texlive-usebib:texlive-usebib-doc)
+#. description(texlive-specs-l:texlive-jmn)
#, fuzzy
-msgid "Documentation for texlive-usebib"
-msgstr "Dokumentace pro adaptx"
+msgid "The jmn package"
+msgstr "Balíčky pro vývoj KDE"
-#. summary(texlive-ushort:texlive-ushort-doc)
-#, fuzzy
-msgid "Documentation for texlive-ushort"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-jmn-fonts)
+msgid "Severed fonts for texlive-jmn"
+msgstr ""
-#. summary(texlive-uspatent:texlive-uspatent-doc)
-msgid "Documentation for texlive-uspatent"
+#. description(texlive-specs-l:texlive-jmn-fonts)
+msgid "The separated fonts package for texlive-jmn"
msgstr ""
-#. summary(texlive-ut-thesis:texlive-ut-thesis-doc)
-#, fuzzy
-msgid "Documentation for texlive-ut-thesis"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-jneurosci)
+msgid "BibTeX style for the Journal of Neuroscience"
+msgstr ""
-#. summary(texlive-utf8mex:texlive-utf8mex-doc)
+#. description(texlive-specs-l:texlive-jneurosci)
+msgid ""
+"This is a slightly modified version of the namedplus style, which fully conforms with the Journal of Neuroscience citation style. It should be characterised as an author-date citation style; a BibTeX style and a LaTeX package are provided.\n"
+"\n"
+"date: 2012-04-24 18:59:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jneurosci-doc)
#, fuzzy
-msgid "Documentation for texlive-utf8mex"
+msgid "Documentation for texlive-jneurosci"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-utopia:texlive-utopia-doc)
+#. description(texlive-specs-l:texlive-jneurosci-doc)
#, fuzzy
-msgid "Documentation for texlive-utopia"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jneurosci"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uwmslide:texlive-uwmslide-doc)
-msgid "Documentation for texlive-uwmslide"
+#. summary(texlive-specs-l:texlive-jpsj)
+msgid "Document Class for Journal of the Physical Society of Japan"
msgstr ""
-#. summary(texlive-uwthesis:texlive-uwthesis-doc)
-#, fuzzy
-msgid "Documentation for texlive-uwthesis"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-jpsj)
+msgid ""
+"The jpsj package\n"
+"\n"
+"date: 2012-04-24 18:59:15 +0000"
+msgstr ""
-#. summary(texlive-vak:texlive-vak-doc)
+#. summary(texlive-specs-l:texlive-jpsj-doc)
#, fuzzy
-msgid "Documentation for texlive-vak"
+msgid "Documentation for texlive-jpsj"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-vancouver:texlive-vancouver-doc)
+#. description(texlive-specs-l:texlive-jpsj-doc)
#, fuzzy
-msgid "Documentation for texlive-vancouver"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jpsj"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-variations:texlive-variations-doc)
+#. summary(texlive-specs-l:texlive-js-misc)
#, fuzzy
-msgid "Documentation for texlive-variations"
-msgstr "Dokumentace pro castor"
+msgid "Miscellaneous macros from Joachim Schrod"
+msgstr "Různé"
-#. summary(texlive-varindex:texlive-varindex-doc)
+#. description(texlive-specs-l:texlive-js-misc)
+msgid ""
+"A bunch of packages, including: idverb.tex, for 'short verbatim'; xfig.tex, for including xfig/transfig output in a TeX document; and cassette.tex for setting cassette labels.\n"
+"\n"
+"date: 2014-01-03 21:58:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-js-misc-doc)
#, fuzzy
-msgid "Documentation for texlive-varindex"
+msgid "Documentation for texlive-js-misc"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-varisize:texlive-varisize-doc)
+#. description(texlive-specs-l:texlive-js-misc-doc)
#, fuzzy
-msgid "Documentation for texlive-varisize"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-js-misc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-varsfromjobname:texlive-varsfromjobname-doc)
+#. summary(texlive-specs-l:texlive-jsclasses)
+msgid "Classes tailored for use with Japanese"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-jsclasses)
+msgid ""
+"Classes jsarticle and jsbook are provided, together with packages okumacro, okuverb and morisawa. These classes are designed to work under ASCII Corporation's Japanese TeX system ptex.\n"
+"\n"
+"date: 2014-05-23 13:52:39 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jsclasses-doc)
#, fuzzy
-msgid "Documentation for texlive-varsfromjobname"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-jsclasses"
+msgstr "HTML dokumentace pro GNU C Library"
-#. summary(texlive-varwidth:texlive-varwidth-doc)
+#. description(texlive-specs-l:texlive-jsclasses-doc)
#, fuzzy
-msgid "Documentation for texlive-varwidth"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-jsclasses"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-vaucanson-g:texlive-vaucanson-g-doc)
+#. summary(texlive-specs-l:texlive-junicode)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-vaucanson-g"
-msgstr "Dokumentace pro castor"
+msgid "A TrueType font for mediaevalists"
+msgstr "Prohlížeč unicodových písem"
-#. summary(texlive-vdmlisting:texlive-vdmlisting-doc)
-msgid "Documentation for texlive-vdmlisting"
+#. description(texlive-specs-l:texlive-junicode)
+msgid ""
+"Junicode is a TrueType font with many OpenType features for antiquarians (especially medievalists) based on typefaces used by the Oxford Press in the late 17th and early 18th centuries. It works well with Xe(La)TeX.\n"
+"\n"
+"date: 2014-05-11 20:11:06 +0000"
msgstr ""
-#. summary(texlive-velthuis:texlive-velthuis-doc)
+#. summary(texlive-specs-l:texlive-junicode-doc)
#, fuzzy
-msgid "Documentation for texlive-velthuis"
+msgid "Documentation for texlive-junicode"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-venn:texlive-venn-doc)
+#. description(texlive-specs-l:texlive-junicode-doc)
#, fuzzy
-msgid "Documentation for texlive-venn"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-junicode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-venndiagram:texlive-venndiagram-doc)
-msgid "Documentation for texlive-venndiagram"
+#. summary(texlive-specs-l:texlive-junicode-fonts)
+msgid "Severed fonts for texlive-junicode"
msgstr ""
-#. summary(texlive-venturisadf:texlive-venturisadf-doc)
-#, fuzzy
-msgid "Documentation for texlive-venturisadf"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-junicode-fonts)
+msgid "The separated fonts package for texlive-junicode"
+msgstr ""
-#. summary(texlive-verbasef:texlive-verbasef-doc)
-#, fuzzy
-msgid "Documentation for texlive-verbasef"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-jura)
+msgid "A document class for German legal texts"
+msgstr ""
-#. summary(texlive-verbatimbox:texlive-verbatimbox-doc)
-#, fuzzy
-msgid "Documentation for texlive-verbatimbox"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-jura)
+msgid ""
+"Implements the standard layout for German term papers in law (one-and-half linespacing, 7 cm margins, etc.). Includes alphanum that permits alphanumeric section numbering (e.g., A. Introduction; III. International Law).\n"
+"\n"
+"date: 2012-05-09 14:03:55 +0000"
+msgstr ""
-#. summary(texlive-verbatimcopy:texlive-verbatimcopy-doc)
+#. summary(texlive-specs-l:texlive-jura-doc)
#, fuzzy
-msgid "Documentation for texlive-verbatimcopy"
+msgid "Documentation for texlive-jura"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-verbdef:texlive-verbdef-doc)
+#. description(texlive-specs-l:texlive-jura-doc)
#, fuzzy
-msgid "Documentation for texlive-verbdef"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jura"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-verbments:texlive-verbments-doc)
-#, fuzzy
-msgid "Documentation for texlive-verbments"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-juraabbrev)
+msgid "Abbreviations for typesetting (German) juridical documents"
+msgstr ""
-#. summary(texlive-verse:texlive-verse-doc)
+#. description(texlive-specs-l:texlive-juraabbrev)
+msgid ""
+"This package should be helpful for people working on (German) law. It helps you to handle abbreviations and creates a list of those (pre-defined) abbreviations that have actually been used in the document\n"
+"\n"
+"date: 2012-05-09 14:03:55 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-juraabbrev-doc)
#, fuzzy
-msgid "Documentation for texlive-verse"
+msgid "Documentation for texlive-juraabbrev"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-version:texlive-version-doc)
+#. description(texlive-specs-l:texlive-juraabbrev-doc)
#, fuzzy
-msgid "Documentation for texlive-version"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-juraabbrev"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-versions:texlive-versions-doc)
+#. summary(texlive-specs-l:texlive-jurabib)
+msgid "Extended BibTeX citation support for the humanities and legal texts"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-jurabib)
+msgid ""
+"This package enables automated citation with BibTeX for legal studies and the humanities. In addition, the package provides commands for specifying editors in a commentary in a convenient way. Simplified formatting of the citation as well as the bibliography entry is also provided. It is possible to display the (short) title of a work only if an authors is cited with multiple works. Giving a full citation in the text, conforming to the bibliography entry, is supported. Several options are provided which might be of special interest for those outside legal studies--for instance, displaying multiple full citations. In addition, the format of last names and first names of authors may be changed easily. Cross references to other footnotes are possible. Language dependent handling of bibliography entries is possible by the special language field.\n"
+"\n"
+"date: 2012-05-09 14:03:55 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jurabib-doc)
#, fuzzy
-msgid "Documentation for texlive-versions"
+msgid "Documentation for texlive-jurabib"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-vertbars:texlive-vertbars-doc)
+#. description(texlive-specs-l:texlive-jurabib-doc)
#, fuzzy
-msgid "Documentation for texlive-vertbars"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jurabib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-vhistory:texlive-vhistory-doc)
+#. summary(texlive-specs-l:texlive-juramisc)
+msgid "Typesetting German juridical documents"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-juramisc)
+msgid ""
+"A collection of classes for typesetting court sentences, legal opinions, books and dissertations for German lawyers. A jurabook class is also provided, which may not yet be complete.\n"
+"\n"
+"date: 2013-10-30 12:49:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-juramisc-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-vhistory"
+msgid "Documentation for texlive-juramisc"
msgstr "Dokumentace pro castor"
-#. summary(texlive-vmargin:texlive-vmargin-doc)
+#. description(texlive-specs-l:texlive-juramisc-doc)
#, fuzzy
-msgid "Documentation for texlive-vmargin"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-juramisc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-vntex:texlive-vntex-doc)
-#, fuzzy
-msgid "Documentation for texlive-vntex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-jurarsp)
+msgid "Citations of judgements and official documents in (German) juridical documents"
+msgstr ""
-#. summary(texlive-vocaltract:texlive-vocaltract-doc)
+#. description(texlive-specs-l:texlive-jurarsp)
+msgid ""
+"This package should be helpful for people working on (German) law. It (ab)uses BibTeX for citations of judgements and official documents. For this purpose, a special BibTeX-style is provided.\n"
+"\n"
+"date: 2012-05-09 14:03:55 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-jurarsp-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Documentation for texlive-vocaltract"
+msgid "Documentation for texlive-jurarsp"
msgstr "Dokumentace pro castor"
-#. summary(texlive-volumes:texlive-volumes-doc)
+#. description(texlive-specs-l:texlive-jurarsp-doc)
#, fuzzy
-msgid "Documentation for texlive-volumes"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jurarsp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-vpe:texlive-vpe-doc)
+#. summary(texlive-specs-l:texlive-jvlisting)
#, fuzzy
-msgid "Documentation for texlive-vpe"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Replacement for make and automake"
+msgid "A replacement for LaTeX's verbatim package"
+msgstr "Náhrada make a automake"
-#. summary(texlive-vruler:texlive-vruler-doc)
-#, fuzzy
-msgid "Documentation for texlive-vruler"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-jvlisting)
+msgid ""
+"This package provides a LaTeX environment listing, an alternative to the built-in verbatim environment. The listing environment is tailored for including listings of computer program source code into documents. The main advantages over the original verbatim environment are: environments automatically fixes leading whitespace so that the environment and program listing can be indented with the rest of the document source, and; listing environments may easily be customised and extended.\n"
+"\n"
+"date: 2014-01-03 21:58:53 +0000"
+msgstr ""
-#. summary(texlive-vwcol:texlive-vwcol-doc)
+#. summary(texlive-specs-l:texlive-jvlisting-doc)
#, fuzzy
-msgid "Documentation for texlive-vwcol"
+msgid "Documentation for texlive-jvlisting"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-wadalab:texlive-wadalab-doc)
+#. description(texlive-specs-l:texlive-jvlisting-doc)
#, fuzzy
-msgid "Documentation for texlive-wadalab"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-jvlisting"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-wallpaper:texlive-wallpaper-doc)
-#, fuzzy
-msgid "Documentation for texlive-wallpaper"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-kantlipsum)
+msgid "Generate sentences in Kant's style"
+msgstr ""
-#. summary(texlive-warning:texlive-warning-doc)
-#, fuzzy
-msgid "Documentation for texlive-warning"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kantlipsum)
+msgid ""
+"The package spits out sentences in Kantian style; the text is provided by the Kant generator for Python by Mark Pilgrim, described in the book \"Dive into Python\". The package is modelled on lipsum, and may be used for similar purposes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-warpcol:texlive-warpcol-doc)
+#. summary(texlive-specs-l:texlive-kantlipsum-doc)
#, fuzzy
-msgid "Documentation for texlive-warpcol"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-kantlipsum"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-was:texlive-was-doc)
+#. description(texlive-specs-l:texlive-kantlipsum-doc)
#, fuzzy
-msgid "Documentation for texlive-was"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kantlipsum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-wasy:texlive-wasy-doc)
-#, fuzzy
-msgid "Documentation for texlive-wasy"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-karnaugh)
+msgid "Typeset Karnaugh-Veitch-maps"
+msgstr ""
-#. summary(texlive-wasysym:texlive-wasysym-doc)
+#. description(texlive-specs-l:texlive-karnaugh)
+msgid ""
+"The package provides macros for typesetting Karnaugh-Maps and Veitch-Charts in a simple and user-friendly way. Karnaugh-Maps and Veitch-Charts are used to display and simplify logic functions \"manually\". These macros can typeset Karnaugh-Maps and Veitch-Charts with up to ten variables (=1024 entries).\n"
+"\n"
+"date: 2013-12-04 19:37:03 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-karnaugh-doc)
#, fuzzy
-msgid "Documentation for texlive-wasysym"
+msgid "Documentation for texlive-karnaugh"
msgstr "Dokumentace pro castor"
-#. summary(texlive-widetable:texlive-widetable-doc)
+#. description(texlive-specs-l:texlive-karnaugh-doc)
#, fuzzy
-msgid "Documentation for texlive-widetable"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-karnaugh"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-williams:texlive-williams-doc)
-#, fuzzy
-#| msgid "Documentation for digiKam"
-msgid "Documentation for texlive-williams"
-msgstr "Dokumentace pro digiKam"
+#. summary(texlive-specs-l:texlive-kastrup)
+msgid "Convert numbers into binary, octal and hexadecimal"
+msgstr ""
-#. summary(texlive-wnri:texlive-wnri-doc)
-#, fuzzy
-msgid "Documentation for texlive-wnri"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kastrup)
+msgid ""
+"Provides expandable macros for both fixed-width and minimum- width numbers to bases 2, 4, 8 and 16.\n"
+"\n"
+"date: 2012-04-27 15:42:45 +0000"
+msgstr ""
-#. summary(texlive-wnri-latex:texlive-wnri-latex-doc)
+#. summary(texlive-specs-l:texlive-kastrup-doc)
#, fuzzy
-msgid "Documentation for texlive-wnri-latex"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-kastrup"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-wordlike:texlive-wordlike-doc)
+#. description(texlive-specs-l:texlive-kastrup-doc)
#, fuzzy
-msgid "Documentation for texlive-wordlike"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kastrup"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-wrapfig:texlive-wrapfig-doc)
-#, fuzzy
-msgid "Documentation for texlive-wrapfig"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-kdgdocs)
+msgid "Document classes for Karel de Grote University College"
+msgstr ""
-#. summary(texlive-wsuipa:texlive-wsuipa-doc)
-#, fuzzy
-msgid "Documentation for texlive-wsuipa"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kdgdocs)
+msgid ""
+"The bundle provides two classes for usage by KdG professors and master students: - kdgcoursetext: for writing course texts, and\n"
+"- kdgmasterthesis: for writing master's theses. The bundle replaces the original kdgcoursetext package (now removed from the archive).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-xargs:texlive-xargs-doc)
+#. summary(texlive-specs-l:texlive-kdgdocs-doc)
#, fuzzy
-msgid "Documentation for texlive-xargs"
+msgid "Documentation for texlive-kdgdocs"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xcite:texlive-xcite-doc)
+#. description(texlive-specs-l:texlive-kdgdocs-doc)
#, fuzzy
-msgid "Documentation for texlive-xcite"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kdgdocs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xcolor:texlive-xcolor-doc)
+#. summary(texlive-specs-l:texlive-kerkis)
+msgid "Kerkis (Greek) font family"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-kerkis)
+msgid ""
+"Sans-serif Greek fonts to match the URW Bookman set (which are distributed with Kerkis). The Kerkis font set has some support for mathematics as well as other glyphs missing from the base URW Bookman fonts. Macros are provided to use the fonts in OT1, T1 (only NG/ng glyphs missing) and LGR encodings, as well as in mathematics; small caps and old-style number glyphs are also available. The philosophy, and the design process, of the Kerkis fonts is discussed in a paper in TUGboat 23(3/4), 2002.\n"
+"\n"
+"date: 2014-05-11 20:11:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-kerkis-doc)
#, fuzzy
-msgid "Documentation for texlive-xcolor"
+msgid "Documentation for texlive-kerkis"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xcomment:texlive-xcomment-doc)
+#. description(texlive-specs-l:texlive-kerkis-doc)
#, fuzzy
-msgid "Documentation for texlive-xcomment"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kerkis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xcookybooky:texlive-xcookybooky-doc)
-msgid "Documentation for texlive-xcookybooky"
+#. summary(texlive-specs-l:texlive-kerkis-fonts)
+msgid "Severed fonts for texlive-kerkis"
msgstr ""
-#. summary(texlive-xdoc:texlive-xdoc-doc)
-#, fuzzy
-msgid "Documentation for texlive-xdoc"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kerkis-fonts)
+msgid "The separated fonts package for texlive-kerkis"
+msgstr ""
-#. summary(texlive-xdvi:texlive-xdvi-doc)
-#, fuzzy
-msgid "Documentation for texlive-xdvi"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-kerntest)
+msgid "Print tables and generate control files to adjust kernings"
+msgstr ""
-#. summary(texlive-xecjk:texlive-xecjk-doc)
-#, fuzzy
-msgid "Documentation for texlive-xecjk"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kerntest)
+msgid ""
+"This class makes it easy to generate tables that show many different kerning pairs of an arbitrary font, usable by LaTeX. It shows the kerning values that are used in the font by default. In addition, this class enables the user to alter the kernings and to observe the results. Kerning pairs can be defined for groups of similar glyphs at the same time. An mtx file is generated automatically. The mtx file may then be loaded by fontinst to introduce the user-made kernings into the virtual font for later use in LaTeX.\n"
+"\n"
+"date: 2012-05-08 20:29:29 +0000"
+msgstr ""
-#. summary(texlive-xecolor:texlive-xecolor-doc)
+#. summary(texlive-specs-l:texlive-kerntest-doc)
#, fuzzy
-msgid "Documentation for texlive-xecolor"
+msgid "Documentation for texlive-kerntest"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xecyr:texlive-xecyr-doc)
+#. description(texlive-specs-l:texlive-kerntest-doc)
#, fuzzy
-msgid "Documentation for texlive-xecyr"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kerntest"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xeindex:texlive-xeindex-doc)
-#, fuzzy
-msgid "Documentation for texlive-xeindex"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-keycommand)
+msgid "Simple creation of commands with key-value arguments"
+msgstr ""
-#. summary(texlive-xepersian:texlive-xepersian-doc)
-#, fuzzy
-msgid "Documentation for texlive-xepersian"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-keycommand)
+msgid ""
+"The package (which requires e-TeX) provides a natural way to define commands with optional keys. The package provides \\newkeycommand, \\renewkeycommand, \\providekeycommand, \\newkeyenvironment and \\renewkeyenvironment, together with \\keycmd for a more advanced interface. The package is based on kvsetkeys by Heiko Oberdiek.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-xesearch:texlive-xesearch-doc)
+#. summary(texlive-specs-l:texlive-keycommand-doc)
#, fuzzy
-msgid "Documentation for texlive-xesearch"
+msgid "Documentation for texlive-keycommand"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xetex:texlive-xetex-doc)
+#. description(texlive-specs-l:texlive-keycommand-doc)
#, fuzzy
-msgid "Documentation for texlive-xetex"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-keycommand"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xetex-devanagari:texlive-xetex-devanagari-doc)
+#. summary(texlive-specs-l:texlive-keyreader)
#, fuzzy
-msgid "Documentation for texlive-xetex-devanagari"
-msgstr "Dokumentace pro adaptx"
+#| msgid "Perl interface to syslog"
+msgid "A robust interface to xkeyval"
+msgstr "Perlové rozhraní pro syslog"
-#. summary(texlive-xetex-itrans:texlive-xetex-itrans-doc)
+#. description(texlive-specs-l:texlive-keyreader)
+msgid ""
+"The package provides a robust interface to controlling keys in xkeyval, removing some of that package's restrictions. The package also addresses some of the issues now covered by the author's ltxkeys package, which was assumed to be a replacement for keyreader. Since keyreader has remained a favourite with users, it has been reinstated.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-keyreader-doc)
#, fuzzy
-msgid "Documentation for texlive-xetex-itrans"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-keyreader"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-xetex-pstricks:texlive-xetex-pstricks-doc)
+#. description(texlive-specs-l:texlive-keyreader-doc)
#, fuzzy
-msgid "Documentation for texlive-xetex-pstricks"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-keyreader"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xetex-tibetan:texlive-xetex-tibetan-doc)
-msgid "Documentation for texlive-xetex-tibetan"
+#. summary(texlive-specs-l:texlive-keystroke)
+msgid "Graphical representation of keys on keyboard"
msgstr ""
-#. summary(texlive-xetexfontinfo:texlive-xetexfontinfo-doc)
+#. description(texlive-specs-l:texlive-keystroke)
+msgid ""
+"A LaTeX package which provides macros for the graphical representation of the keys on a computer keyboard.\n"
+"\n"
+"date: 2012-05-08 20:29:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-keystroke-doc)
#, fuzzy
-msgid "Documentation for texlive-xetexfontinfo"
+msgid "Documentation for texlive-keystroke"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xetexko:texlive-xetexko-doc)
-msgid "Documentation for texlive-xetexko"
+#. description(texlive-specs-l:texlive-keystroke-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-keystroke"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-l:texlive-keyval2e)
+msgid "A lightweight and robust key-value parser"
msgstr ""
-#. summary(texlive-xevlna:texlive-xevlna-doc)
-msgid "Documentation for texlive-xevlna"
+#. description(texlive-specs-l:texlive-keyval2e)
+msgid ""
+"The package provides lightweight and robust facilities for creating and managing keys. Its machinery isn't as extensive as that of, e.g., the ltxkeys package, but it is equally robust; ease of use and speed of processing are the design aims of the package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xfor:texlive-xfor-doc)
+#. summary(texlive-specs-l:texlive-keyval2e-doc)
#, fuzzy
-msgid "Documentation for texlive-xfor"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-keyval2e"
+msgstr "Dokumentace pro gawk"
-#. summary(texlive-xgreek:texlive-xgreek-doc)
+#. description(texlive-specs-l:texlive-keyval2e-doc)
#, fuzzy
-msgid "Documentation for texlive-xgreek"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-keyval2e"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xhfill:texlive-xhfill-doc)
+#. summary(texlive-specs-l:texlive-kix)
+msgid "Typeset KIX codes"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-kix)
+msgid ""
+"Implements KIX codes as used by the Dutch PTT for bulk mail addressing. (Royal Mail 4 State Code.) KIX is a registered trade mark of PTT Post Holdings B. V.\n"
+"\n"
+"date: 2012-05-08 20:29:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-kix-doc)
#, fuzzy
-msgid "Documentation for texlive-xhfill"
+msgid "Documentation for texlive-kix"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xifthen:texlive-xifthen-doc)
+#. description(texlive-specs-l:texlive-kix-doc)
#, fuzzy
-msgid "Documentation for texlive-xifthen"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kix"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xint:texlive-xint-doc)
-msgid "Documentation for texlive-xint"
+#. summary(texlive-specs-l:texlive-kixfont)
+msgid "A font for KIX codes"
msgstr ""
-#. summary(texlive-xits:texlive-xits-doc)
-#, fuzzy
-msgid "Documentation for texlive-xits"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kixfont)
+msgid ""
+"The KIX code is a barcode-like format used by the Dutch PTT to encode country codes, zip codes and street numbers in a machine-readable format. If printed below the address line on bulk mailings, a discount can be obtained. The font is distributed in Metafont format, and covers the numbers and upper-case letters.\n"
+"\n"
+"date: 2014-05-08 22:43:11 +0000"
+msgstr ""
-#. summary(texlive-xkeyval:texlive-xkeyval-doc)
+#. summary(texlive-specs-l:texlive-kixfont-doc)
#, fuzzy
-msgid "Documentation for texlive-xkeyval"
+msgid "Documentation for texlive-kixfont"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xlop:texlive-xlop-doc)
+#. description(texlive-specs-l:texlive-kixfont-doc)
#, fuzzy
-msgid "Documentation for texlive-xlop"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kixfont"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xltxtra:texlive-xltxtra-doc)
-#, fuzzy
-msgid "Documentation for texlive-xltxtra"
-msgstr "Dokumentace pro adaptx"
+#. summary(texlive-specs-l:texlive-kluwer)
+msgid "Package kluwer"
+msgstr "Balíček kluwer"
-#. summary(texlive-xmltex:texlive-xmltex-doc)
-#, fuzzy
-msgid "Documentation for texlive-xmltex"
-msgstr "Dokumentace pro adaptx"
+#. description(texlive-specs-l:texlive-kluwer)
+msgid "The kluwer package"
+msgstr ""
-#. summary(texlive-xmpincl:texlive-xmpincl-doc)
+#. summary(texlive-specs-l:texlive-kluwer-doc)
#, fuzzy
-msgid "Documentation for texlive-xmpincl"
+msgid "Documentation for texlive-kluwer"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xnewcommand:texlive-xnewcommand-doc)
+#. description(texlive-specs-l:texlive-kluwer-doc)
#, fuzzy
-msgid "Documentation for texlive-xnewcommand"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kluwer"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xoptarg:texlive-xoptarg-doc)
+#. summary(texlive-specs-l:texlive-knitting)
+msgid "Produce knitting charts, in Plain TeX or LaTeX"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-knitting)
+msgid ""
+"The package provides symbol fonts and commands to write charted instructions for cable and lace knitting patterns, using either plain TeX or LaTeX. The fonts are available both as Metafont source and in Adobe Type 1 format.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-knitting-doc)
#, fuzzy
-msgid "Documentation for texlive-xoptarg"
+msgid "Documentation for texlive-knitting"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xpatch:texlive-xpatch-doc)
+#. description(texlive-specs-l:texlive-knitting-doc)
#, fuzzy
-msgid "Documentation for texlive-xpatch"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-knitting"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xpeek:texlive-xpeek-doc)
-msgid "Documentation for texlive-xpeek"
+#. summary(texlive-specs-l:texlive-knitting-fonts)
+msgid "Severed fonts for texlive-knitting"
msgstr ""
-#. summary(texlive-xpicture:texlive-xpicture-doc)
-msgid "Documentation for texlive-xpicture"
+#. description(texlive-specs-l:texlive-knitting-fonts)
+msgid "The separated fonts package for texlive-knitting"
msgstr ""
-#. summary(texlive-xpinyin:texlive-xpinyin-doc)
-msgid "Documentation for texlive-xpinyin"
+#. summary(texlive-specs-l:texlive-knittingpattern)
+msgid "Create knitting patterns"
msgstr ""
-#. summary(texlive-xpunctuate:texlive-xpunctuate-doc)
-msgid "Documentation for texlive-xpunctuate"
+#. description(texlive-specs-l:texlive-knittingpattern)
+msgid ""
+"The class provides a simple, effective method for knitters to produce high-quality, attractive patterns using LaTeX. It does this by providing commands to handle as much of the layout of the document as possible, leaving the author free to concentrate on the pattern.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xq:texlive-xq-doc)
+#. summary(texlive-specs-l:texlive-knittingpattern-doc)
#, fuzzy
-msgid "Documentation for texlive-xq"
-msgstr "Dokumentace pro adaptx"
+msgid "Documentation for texlive-knittingpattern"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-xskak:texlive-xskak-doc)
+#. description(texlive-specs-l:texlive-knittingpattern-doc)
#, fuzzy
-msgid "Documentation for texlive-xskak"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-knittingpattern"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xstring:texlive-xstring-doc)
+#. summary(texlive-specs-l:texlive-knuth)
+msgid "Knuth's published errata"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-knuth)
+msgid ""
+"These files record details of problems reported in the 'Computers and Typesetting' series of books, for the Computer Modern fonts, and for TeX, MetaFont and related programs.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-knuth-doc)
#, fuzzy
-msgid "Documentation for texlive-xstring"
+msgid "Documentation for texlive-knuth"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xtab:texlive-xtab-doc)
+#. description(texlive-specs-l:texlive-knuth-doc)
#, fuzzy
-msgid "Documentation for texlive-xtab"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-knuth"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xunicode:texlive-xunicode-doc)
+#. summary(texlive-specs-l:texlive-knuth-lib)
+msgid "A small library of MetaFont sources"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-knuth-lib)
+msgid ""
+"A collection of miscellaneous MetaFont source, including the means to generate the logo font that is used for MetaFont and MetaPost.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-knuthotherfonts)
+msgid "Package knuthotherfonts"
+msgstr "Balíček knuthotherfonts"
+
+#. description(texlive-specs-l:texlive-knuthotherfonts)
#, fuzzy
-msgid "Documentation for texlive-xunicode"
-msgstr "Dokumentace pro adaptx"
+#| msgid "TrueType fonts from the GNU intlfonts package."
+msgid "The knuthotherfonts package"
+msgstr "TrueType písma z balíku GNU intlfonts."
-#. summary(texlive-xwatermark:texlive-xwatermark-doc)
+#. summary(texlive-specs-l:texlive-koma-moderncvclassic)
+msgid "Makes the style and command of moderncv (style classic) available for koma-classes and thus compatible with biblatex"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-koma-moderncvclassic)
+msgid ""
+"This package provides an imitation of the moderncv class with the classic style (by Xavier Danaux), to be used in conjunction with the koma-classes. Thus it is possible to configure pagelayout, headings etc. the way it is done in koma-classes. Moreover, it is possible to use biblatex, while the original moderncv-class is incompatible with biblatex.\n"
+"\n"
+"date: 2012-01-05 00:27:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-koma-moderncvclassic-doc)
#, fuzzy
-msgid "Documentation for texlive-xwatermark"
+msgid "Documentation for texlive-koma-moderncvclassic"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xyling:texlive-xyling-doc)
+#. description(texlive-specs-l:texlive-koma-moderncvclassic-doc)
#, fuzzy
-msgid "Documentation for texlive-xyling"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-koma-moderncvclassic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xypic:texlive-xypic-doc)
+#. summary(texlive-specs-l:texlive-koma-script)
+msgid "A bundle of versatile classes and packages"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-koma-script)
+msgid ""
+"The KOMA-Script bundle provides drop-in replacements for the article/report/book classes with emphasis on typography and versatility. There is also a letter class, different from all other letter classes. The bundle also offers: - a package for calculating type areas in the way laid down by the typographer Jan Tschichold, - a package for easily changing and defining page styles, - a package scrdate for getting not only the current date but also the name of the day, and - a package scrtime for getting the current time. All these packages may be used not only with KOMA-Script classes but also with the standard classes. Since every package has its own version number, the version number quoted only refers to the version of scrbook, scrreprt, scrartcl, scrlttr2 and typearea. These are the main parts of the bundle.\n"
+"\n"
+"date: 2013-12-26 06:56:41 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-koma-script-doc)
#, fuzzy
-msgid "Documentation for texlive-xypic"
+msgid "Documentation for texlive-koma-script"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xytree:texlive-xytree-doc)
+#. description(texlive-specs-l:texlive-koma-script-doc)
#, fuzzy
-msgid "Documentation for texlive-xytree"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-koma-script"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-yafoot:texlive-yafoot-doc)
+#. summary(texlive-specs-l:texlive-koma-script-examples)
+msgid "Examples from the KOMA-Script book"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-koma-script-examples)
+msgid ""
+"This package contains some examples from the 5th edition of the book >>KOMA-Script<<, >>Eine Sammlung von Klassen und Paketen fur LaTeX2e<< by Markus Kohm, published by Lehmanns Media. There are no further descriptions of these examples.\n"
+"\n"
+"date: 2014-05-23 09:15:36 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-koma-script-sfs)
+msgid "Koma-script letter class option for Finnish"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-koma-script-sfs)
+msgid ""
+"A koma-script parameter set for letters on A4 paper, complying with Finnish standards SFS 2486, 2487 and 2488; suitable for window envelopes with window on the left size in the sizes C5, C65, E5 and E65 (although, because the address window is smaller, for sizes E5 and E65 the address may not fit within the window, but ordinary 3-line address should fit).\n"
+"\n"
+"date: 2012-05-08 10:20:07 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-koma-script-sfs-doc)
#, fuzzy
-msgid "Documentation for texlive-yafoot"
+msgid "Documentation for texlive-koma-script-sfs"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-yagusylo:texlive-yagusylo-doc)
+#. description(texlive-specs-l:texlive-koma-script-sfs-doc)
#, fuzzy
-msgid "Documentation for texlive-yagusylo"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-koma-script-sfs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-yannisgr:texlive-yannisgr-doc)
+#. summary(texlive-specs-l:texlive-kotex-oblivoir)
#, fuzzy
-msgid "Documentation for texlive-yannisgr"
-msgstr "Dokumentace pro castor"
+msgid "A LaTeX document class for typesetting Korean documents"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. summary(texlive-yax:texlive-yax-doc)
+#. description(texlive-specs-l:texlive-kotex-oblivoir)
+msgid ""
+"The class is based on memoir, and is adapted to typesetting Korean documents. The bundle (of class and associated packages) belongs to the ko.TeX bundle.\n"
+"\n"
+"date: 2014-05-23 13:55:46 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-kotex-oblivoir-doc)
#, fuzzy
-msgid "Documentation for texlive-yax"
+msgid "Documentation for texlive-kotex-oblivoir"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ydoc:texlive-ydoc-doc)
+#. description(texlive-specs-l:texlive-kotex-oblivoir-doc)
#, fuzzy
-msgid "Documentation for texlive-ydoc"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kotex-oblivoir"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-yfonts:texlive-yfonts-doc)
+#. summary(texlive-specs-l:texlive-kotex-plain)
#, fuzzy
-msgid "Documentation for texlive-yfonts"
-msgstr "Dokumentace pro adaptx"
+msgid "Macros for typesetting Korean under Plain TeX"
+msgstr "Thajské překlady pro KDE"
-#. summary(texlive-yhmath:texlive-yhmath-doc)
+#. description(texlive-specs-l:texlive-kotex-plain)
+msgid ""
+"The package provides macros for typesetting Hangul, the native alphabet of the Korean language, using plain *TeX. Input Korean text should be encoded in UTF-8. The package is belongs to the ko.TeX bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-kotex-plain-doc)
#, fuzzy
-msgid "Documentation for texlive-yhmath"
+msgid "Documentation for texlive-kotex-plain"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-york-thesis:texlive-york-thesis-doc)
+#. description(texlive-specs-l:texlive-kotex-plain-doc)
#, fuzzy
-msgid "Documentation for texlive-york-thesis"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kotex-plain"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-youngtab:texlive-youngtab-doc)
+#. summary(texlive-specs-l:texlive-kotex-utf)
+msgid "Typeset Hangul, coded in UTF-8"
+msgstr ""
+
+#. description(texlive-specs-l:texlive-kotex-utf)
+msgid ""
+"The package typesets Hangul, which is the native alphabet of the Korean language; input Korean text should be encoded in UTF-8. The bundle (of class and associated packages) belongs to the ko.TeX bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-kotex-utf-doc)
#, fuzzy
-msgid "Documentation for texlive-youngtab"
+msgid "Documentation for texlive-kotex-utf"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-yplan:texlive-yplan-doc)
+#. description(texlive-specs-l:texlive-kotex-utf-doc)
#, fuzzy
-msgid "Documentation for texlive-yplan"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kotex-utf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ytableau:texlive-ytableau-doc)
+#. summary(texlive-specs-l:texlive-kotex-utils)
#, fuzzy
-msgid "Documentation for texlive-ytableau"
-msgstr "Dokumentace pro adaptx"
+msgid "Utility scripts and support files for typesetting Korean"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. summary(texlive-zed-csp:texlive-zed-csp-doc)
+#. description(texlive-specs-l:texlive-kotex-utils)
+msgid ""
+"The bundle provides scripts and support files for index generation in Korean language typesetting. The files belong to the ko.TeX bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-l:texlive-kotex-utils-doc)
#, fuzzy
-msgid "Documentation for texlive-zed-csp"
+msgid "Documentation for texlive-kotex-utils"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-zhmetrics:texlive-zhmetrics-doc)
+#. description(texlive-specs-l:texlive-kotex-utils-doc)
#, fuzzy
-msgid "Documentation for texlive-zhmetrics"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kotex-utils"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-zhnumber:texlive-zhnumber-doc)
-msgid "Documentation for texlive-zhnumber"
+#. description(texlive-specs-l:texlive-kpathsea)
+msgid ""
+"Kpathsea is a library and utility programs which provide path searching facilities for TeX file types, including the self- locating feature required for movable installations, layered on top of a general search mechanism. It is not distributed separately, but rather is released and maintained as part of the TeX live sources.\n"
+"\n"
+"date: 2012-03-14 11:38:42 +0000"
msgstr ""
-#. summary(texlive-zhspacing:texlive-zhspacing-doc)
+#. summary(texlive-specs-l:texlive-kpathsea-doc)
#, fuzzy
-msgid "Documentation for texlive-zhspacing"
+msgid "Documentation for texlive-kpathsea"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ziffer:texlive-ziffer-doc)
+#. description(texlive-specs-l:texlive-kpathsea-doc)
#, fuzzy
-msgid "Documentation for texlive-ziffer"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kpathsea"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-zwgetfdate:texlive-zwgetfdate-doc)
+#. summary(texlive-specs-m:texlive-kpfonts)
+msgid "A complete set of fonts for text and mathematics"
+msgstr ""
+
+#. description(texlive-specs-m:texlive-kpfonts)
+msgid ""
+"The family contains text fonts in roman, sans-serif and monospaced shapes, with true small caps and old-style numbers; the package offers full support of the textcomp package. The mathematics fonts include all the AMS fonts, in both normal and bold weights. Each of the font types is available in two main versions: default and 'light'. Each version is available in four variants: default; oldstyle numbers; oldstyle numbers with old ligatures such as ct and st, and long-tailed capital Q; and veryoldstyle with long s. Other variants include small caps as default or 'large small caps', and for mathematics both upright and slanted shapes for Greek letters, as well as default and narrow versions of multiple integrals. The fonts were originally derived from URW Palladio (with URW's agreement) though the fonts are very clearly different in appearance from their parent.\n"
+"\n"
+"date: 2014-05-10 15:23:39 +0000"
+msgstr ""
+
+#. summary(texlive-specs-m:texlive-kpfonts-doc)
#, fuzzy
-msgid "Documentation for texlive-zwgetfdate"
+msgid "Documentation for texlive-kpfonts"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-zwpagelayout:texlive-zwpagelayout-doc)
+#. description(texlive-specs-m:texlive-kpfonts-doc)
#, fuzzy
-msgid "Documentation for texlive-zwpagelayout"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kpfonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-zxjafbfont:texlive-zxjafbfont-doc)
-msgid "Documentation for texlive-zxjafbfont"
+#. summary(texlive-specs-m:texlive-kpfonts-fonts)
+msgid "Severed fonts for texlive-kpfonts"
msgstr ""
-#. summary(texlive-zxjafont:texlive-zxjafont-doc)
-msgid "Documentation for texlive-zxjafont"
+#. description(texlive-specs-m:texlive-kpfonts-fonts)
+msgid "The separated fonts package for texlive-kpfonts"
msgstr ""
-#. summary(texlive-zxjatype:texlive-zxjatype-doc)
-msgid "Documentation for texlive-zxjatype"
-msgstr ""
+#. summary(texlive-specs-m:texlive-ksfh_nat)
+#, fuzzy
+msgid "BibTeX style for KSFH Munich"
+msgstr "Styl Thin Keramik pro KDE"
-#. description(xindy:xindy-doc)
-msgid "Documentation for the Xindy index generator."
+#. description(texlive-specs-m:texlive-ksfh_nat)
+msgid ""
+"The package supports bibliographies as standard for KSFH (Katholische Stiftungsfachhochschule) Munich. BibTeX entries in article, book, inbook, incollection and misc formats are supported.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tidy:tidy-doc)
-msgid "Documentation for tidy and libtidy-0_99-0"
+#. summary(texlive-specs-m:texlive-ktv-texdata)
+#, fuzzy
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Extract subsets of documents"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
+
+#. description(texlive-specs-m:texlive-ktv-texdata)
+msgid ""
+"The package defines an exercice environment which numbers every exercise, and a command \\get to extract a collection whose argument is a comma-separated set of exercise index numbers. While the package was designed for teachers constructing tables of exercises, it plainly has more general application.\n"
+"\n"
+"date: 2012-08-13 10:34:19 +0000"
msgstr ""
-#. summary(yaz:yaz-doc)
+#. summary(texlive-specs-m:texlive-ktv-texdata-doc)
#, fuzzy
-msgid "Documentation for yaz (Z39.50 Library)"
-msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+msgid "Documentation for texlive-ktv-texdata"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pitex)
+#. description(texlive-specs-m:texlive-ktv-texdata-doc)
#, fuzzy
-msgid "Documentation macros"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-ktv-texdata"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tkz-doc)
+#. summary(texlive-specs-m:texlive-kurier)
+msgid "A two-element sans-serif typeface"
+msgstr ""
+
+#. description(texlive-specs-m:texlive-kurier)
+msgid ""
+"Kurier is a two-element sans-serif typeface. It was designed for a diploma in typeface design at the Warsaw Academy of Fine Arts under the supervision of Roman Tomaszewski. This distribution contains a significantly extended set of characters covering the following modern alphabets: latin (including Vietnamese), Cyrillic and Greek as well as a number of additional symbols (including mathematical symbols). The fonts are prepared in Type 1 and OpenType formats. For use with TeX the following encoding files have been prepared: T1 (ec), T2 (abc), and OT2--Cyrillic, T5 (Vietnamese), OT4, QX, texansi and--nonstandard (IL2 for the Czech fonts), as well as supporting macros and files defining fonts for LaTeX.\n"
+"\n"
+"date: 2014-05-10 15:23:39 +0000"
+msgstr ""
+
+#. summary(texlive-specs-m:texlive-kurier-doc)
#, fuzzy
-msgid "Documentation macros for the TKZ series of packages"
+msgid "Documentation for texlive-kurier"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ltxdockit)
+#. description(texlive-specs-m:texlive-kurier-doc)
#, fuzzy
-#| msgid "Documentation for adaptx"
-msgid "Documentation support"
-msgstr "Dokumentace pro adaptx"
+msgid "This package includes the documentation for texlive-kurier"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xml-commons:xml-commons-jaxp-1.1-apis-manual)
-msgid "Documents for xml-commons-jaxp-1.1-apis"
+#. summary(texlive-specs-m:texlive-kurier-fonts)
+msgid "Severed fonts for texlive-kurier"
msgstr ""
-#. summary(xml-commons:xml-commons-jaxp-1.2-apis-manual)
-msgid "Documents for xml-commons-jaxp-1.2-apis"
+#. description(texlive-specs-m:texlive-kurier-fonts)
+msgid "The separated fonts package for texlive-kurier"
msgstr ""
-#. summary(xml-commons:xml-commons-jaxp-1.3-apis-manual)
-msgid "Documents for xml-commons-jaxp-1.3-apis"
+#. summary(texlive-specs-m:texlive-l2picfaq)
+msgid "LaTeX pictures \"how-to\" (German)"
msgstr ""
-#. summary(texlive-punk)
-msgid "Donald Knuth's punk font"
+#. description(texlive-specs-m:texlive-l2picfaq)
+msgid ""
+"The document (in German) is a collection of \"how-to\" notes about LaTeX and pictures. The aim of the document is to provide a solution, in the form of some sample code, for every problem.\n"
+"\n"
+"date: 2012-04-26 10:50:58 +0000"
msgstr ""
-#. summary(texlive-pst-fun)
-msgid "Draw \"funny\" objects with PSTricks"
+#. summary(texlive-specs-m:texlive-l2tabu)
+msgid "Obsolete packages and commands"
msgstr ""
-#. summary(texlive-pst-fr3d)
-msgid "Draw 3-dimensional framed boxes using PSTricks"
+#. description(texlive-specs-m:texlive-l2tabu)
+msgid ""
+"The \"sins\" of LaTeX users, and how to correct them. The document provides a list of obsolete packages and commands (this original is in German; it has been translated into English, French, Italian and Spanish).\n"
+"\n"
+"date: 2012-04-26 10:50:58 +0000"
msgstr ""
-#. summary(texlive-pst-3dplot)
-msgid "Draw 3D objects in parallel projection, using PSTricks"
+#. summary(texlive-specs-m:texlive-l2tabu-english)
+msgid "English translation of \"Obsolete packages and commands\""
msgstr ""
-#. summary(texlive-psbao)
-msgid "Draw Bao diagrams"
+#. description(texlive-specs-m:texlive-l2tabu-english)
+msgid ""
+"English translation of the l2tabu practical guide to LaTeX2e by Mark Trettin. A list of obsolete packages and commands.\n"
+"\n"
+"date: 2012-04-26 10:50:58 +0000"
msgstr ""
-#. summary(texlive-tikz-bayesnet)
-msgid "Draw Bayesian networks, graphical models and directed factor graphs"
-msgstr ""
+#. summary(texlive-specs-m:texlive-l2tabu-french)
+#, fuzzy
+#| msgid "French Translations for KDE"
+msgid "French translation of l2tabu"
+msgstr "Francouzské překlady pro KDE"
-#. summary(texlive-pst-bezier)
-msgid "Draw Bezier curves"
-msgstr ""
+#. description(texlive-specs-m:texlive-l2tabu-french)
+#, fuzzy
+#| msgid "French Translations for KDE"
+msgid ""
+"French translation of l2tabu.\n"
+"\n"
+"date: 2013-07-30 18:12:28 +0000"
+msgstr "Francouzské překlady pro KDE"
-#. summary(texlive-pst-gantt)
-msgid "Draw GANTT charts with pstricks"
+#. summary(texlive-specs-m:texlive-l2tabu-italian)
+msgid "Italian Translation of Obsolete packages and commands"
msgstr ""
-#. summary(texlive-pgfgantt)
-msgid "Draw Gantt charts with TikZ"
+#. description(texlive-specs-m:texlive-l2tabu-italian)
+msgid ""
+"Italian translation of the l2tabu practical guide to LaTeX2e (a list of obsolete packages and commands).\n"
+"\n"
+"date: 2012-02-28 10:54:12 +0000"
msgstr ""
-#. summary(texlive-tkz-kiviat)
-msgid "Draw Kiviat graphs"
+#. summary(texlive-specs-m:texlive-l2tabu-spanish)
+msgid "Spanish translation of \"Obsolete packages and commands\""
msgstr ""
-#. summary(texlive-lewis)
-msgid "Draw Lewis structures"
+#. description(texlive-specs-m:texlive-l2tabu-spanish)
+msgid ""
+"A Spanish translation of the l2tabu practical guide to LaTeX2e by Mark Trettin. A list of obsolete packages, commands and usages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-msc)
-msgid "Draw MSC diagrams"
+#. summary(texlive-specs-m:texlive-l3experimental)
+msgid "Experimental LaTeX3 concepts"
msgstr ""
-#. summary(texlive-mfpic)
-msgid "Draw Metafont/post pictures from (La)TeX commands"
+#. description(texlive-specs-m:texlive-l3experimental)
+msgid ""
+"The l3experimental packages are a collection of experimental implementations for aspects of the LaTeX3 kernel, dealing with higher-level ideas such as the Designer Interface. Some of them work as stand alone packages, providing new functionality, and can be used on top of LaTeX2e with no changes to the existing kernel. The present release includes: xgalley, which controls boxes receiving text for typesetting. l3regex: kernel support for regular expression search and replace operations; l3sort: kernel support for sorting sequences, token lists or comma- lists, according to user-specified comparison criteria; l3str: kernel support for string manipulation; l3tl-build: kernel support for token list building; l3tl_analysis: kernel support for token list analysis; and xcoffins, which allows the alignment of boxes using a series of 'handle' positions, supplementing the simple TeX reference point. All the files of the bundle are also available in the Subversion (SVN) repository of the LaTe
X3 Project. The bundle on CTAN is based on a snapshot of the SVN repository on 2013-10-11.\n"
+"\n"
+"date: 2014-05-07 13:15:43 +0000"
msgstr ""
-#. summary(texlive-struktex)
-msgid "Draw Nassi-Schneidermann charts"
-msgstr ""
+#. summary(texlive-specs-m:texlive-l3experimental-doc)
+#, fuzzy
+msgid "Documentation for texlive-l3experimental"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-reotex)
-msgid "Draw Reo Channels and Circuits"
-msgstr ""
+#. description(texlive-specs-m:texlive-l3experimental-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-l3experimental"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pgf-umlsd)
-msgid "Draw UML Sequence Diagrams"
+#. summary(texlive-specs-m:texlive-l3kernel)
+msgid "LaTeX3 programming conventions"
msgstr ""
-#. summary(texlive-pst-soroban)
-msgid "Draw a Soroban using PSTricks"
+#. description(texlive-specs-m:texlive-l3kernel)
+msgid ""
+"The l3kernel bundle provides an implementation of the LaTeX3 programmers' interface, as a set of packages that run under LaTeX 2e. The interface provides the foundation on which the LaTeX3 kernel and other future code are built: it is an API for TeX programmers. The packages are set up so that the LaTeX3 conventions can be used with regular LaTeX 2e packages. All the files of the bundle are also available in the project's Subversion (SVN) repository\n"
+"\n"
+"date: 2014-05-22 14:34:50 +0000"
msgstr ""
-#. summary(texlive-tikzpfeile)
-msgid "Draw arrows using PGF/TikZ"
-msgstr ""
+#. summary(texlive-specs-m:texlive-l3kernel-doc)
+#, fuzzy
+msgid "Documentation for texlive-l3kernel"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-schemabloc)
-msgid "Draw block diagrams, using Tikz"
-msgstr ""
+#. description(texlive-specs-m:texlive-l3kernel-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-l3kernel"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-spectra)
-msgid "Draw continuum, emission and absorption spectra with PSTricks"
+#. summary(texlive-specs-m:texlive-l3packages)
+msgid "High-level LaTeX3 concepts"
msgstr ""
-#. summary(texlive-pst-bspline)
-msgid "Draw cubic Bspline curves and interpolations"
+#. description(texlive-specs-m:texlive-l3packages)
+msgid ""
+"The bundle holds prototype implementations of concepts for a LaTeX designer interface, to be used with the experimental LaTeX kernel as programming tools and kernel support. Packages provided in this release are: l3keys2e, which makes the facilities of the kernel module l3keys available for use by LaTeX 2e packages; xfrac, which provides flexible split-level fractions; xparse, which provides a high-level interface for declaring document commands; and xtemplate, which provides a means of defining generic functions using a key-value syntax. All the files of the bundle are also available in the Subversion (SVN) repository of the LaTeX3 Project. The bundle on CTAN is based on a snapshot of the SVN repository on; it should be used with copies of the l3kernel at SVN version 2544 or later.\n"
+"\n"
+"date: 2014-05-06 05:39:29 +0000"
msgstr ""
-#. summary(texlive-pst-electricfield)
-msgid "Draw electric field and equipotential lines with PStricks"
-msgstr ""
+#. summary(texlive-specs-m:texlive-l3packages-doc)
+#, fuzzy
+msgid "Documentation for texlive-l3packages"
+msgstr "HTML dokumentace pro GNU C Library"
-#. summary(texlive-pst-fractal)
-msgid "Draw fractal sets using PSTricks"
-msgstr ""
+#. description(texlive-specs-m:texlive-l3packages-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-l3packages"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tkz-graph)
-msgid "Draw graph-theory graphs"
+#. summary(texlive-specs-m:texlive-labbook)
+msgid "Typeset laboratory journals"
msgstr ""
-#. summary(texlive-pgfmolbio)
-msgid "Draw graphs typically found in molecular biology texts"
+#. description(texlive-specs-m:texlive-labbook)
+msgid ""
+"This class is designed to typeset laboratory journals that contain chronologically ordered records about experiments. From the sectioning commands, an experiment index is generated. The class is based on the KOMA-Script class scrbook.cls. There can be several index entries for one experiment.\n"
+"\n"
+"date: 2012-04-26 11:32:32 +0000"
msgstr ""
-#. summary(texlive-tikz-inet)
-msgid "Draw interaction nets with TikZ"
-msgstr ""
+#. summary(texlive-specs-m:texlive-labbook-doc)
+#, fuzzy
+msgid "Documentation for texlive-labbook"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-pdgr)
-msgid "Draw medical pedigrees using pstricks"
-msgstr ""
+#. description(texlive-specs-m:texlive-labbook-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-labbook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-labo)
-msgid "Draw objects for Chemistry laboratories"
+#. summary(texlive-specs-m:texlive-labelcas)
+msgid "Check the existence of labels, and fork accordingly"
msgstr ""
-#. summary(texlive-pst-solides3d)
-msgid "Draw perspective views of 3D solids"
+#. description(texlive-specs-m:texlive-labelcas)
+msgid ""
+"The package defines two commands: \\eachlabelcase, which distinguishes whether a set of labels is defined, and for each label either queues action accordingly, or appends the action to a macro; and \\lotlabelcase, which takes a comma-separated list of label names, and distinguishes the resulting action on whether all were defined, whether none were defined, whether not all were defined, or whether the lest is empty (again, the action resulting from \\lotlabelcase may be written to a macro).\n"
+"\n"
+"date: 2014-01-08 10:19:39 +0000"
msgstr ""
-#. summary(texlive-pst-vue3d)
-msgid "Draw perspective views of three dimensional objects"
-msgstr ""
+#. summary(texlive-specs-m:texlive-labelcas-doc)
+#, fuzzy
+msgid "Documentation for texlive-labelcas"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-piechartmp)
-msgid "Draw pie-charts using MetaPost"
-msgstr ""
+#. description(texlive-specs-m:texlive-labelcas-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-labelcas"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-sfg)
-msgid "Draw signal flow graphs"
+#. summary(texlive-specs-m:texlive-labels)
+msgid "Print sheets of sticky labels"
msgstr ""
-#. summary(texlive-pst-pad)
-msgid "Draw simple attachment systems with PSTricks"
+#. description(texlive-specs-m:texlive-labels)
+msgid ""
+"A LaTeX package to print a regular grid of ragged-right labels on a page, suitable for sheets of labels which can be fed through a printer. Macros are provided to allow easy input of names and addresses in a form free of TeX markup. Equally useful is a feature for making multiple copies of a single label, e.g., return address stickers to go with the labels. Rows, columns, borders can all be specified to match the label sheet being used.\n"
+"\n"
+"date: 2011-12-16 15:22:52 +0000"
msgstr ""
-#. summary(texlive-xyling)
-msgid "Draw syntactic trees, etc., for linguistics literature, using xy-pic"
-msgstr ""
+#. summary(texlive-specs-m:texlive-labels-doc)
+#, fuzzy
+msgid "Documentation for texlive-labels"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-t-angles)
-msgid "Draw tangles, trees, Hopf algebra operations and other pictures"
+#. description(texlive-specs-m:texlive-labels-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-labels"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-labyrinth)
+msgid "Draw labyrinths and solution paths"
msgstr ""
-#. summary(texlive-pst-rubans)
-msgid "Draw three-dimensional ribbons"
+#. description(texlive-specs-m:texlive-labyrinth)
+msgid ""
+"The labyrinth package provides code and an environment for typesetting simple labyrinths with LaTeX, and generating an automatic or manual solution path.\n"
+"\n"
+"date: 2014-04-25 09:20:11 +0000"
msgstr ""
-#. summary(texlive-qtree)
+#. summary(texlive-specs-m:texlive-labyrinth-doc)
#, fuzzy
-msgid "Draw tree structures"
-msgstr "Úhledný tisk mailů"
+msgid "Documentation for texlive-labyrinth"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-treetex)
-msgid "Draw trees"
-msgstr ""
+#. description(texlive-specs-m:texlive-labyrinth-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-labyrinth"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-tvz)
-msgid "Draw trees with more than on root node, using PSTricks"
+#. summary(texlive-specs-m:texlive-lacheck)
+msgid "LaTeX checker"
msgstr ""
-#. summary(texlive-tqft)
-msgid "Drawing TQFT diagrams with TikZ/PGF"
+#. description(texlive-specs-m:texlive-lacheck)
+msgid ""
+"Lacheck is a tool for finding common mistakes in LaTeX documents. The distribution includes sources, and executables for OS/2 and Win32 environments.\n"
+"\n"
+"date: 2012-06-23 22:35:21 +0000"
msgstr ""
-#. summary(texlive-modiagram)
-msgid "Drawing molecular orbital diagrams"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lambda)
+msgid "Package lambda"
+msgstr "Balíček lambda"
-#. summary(texlive-pst-optexp)
-msgid "Drawing optical experimental setups"
+#. description(texlive-specs-m:texlive-lambda)
+msgid "The lambda package"
msgstr ""
-#. summary(texlive-pst-optic)
-msgid "Drawing optics diagrams"
+#. summary(texlive-specs-m:texlive-lambda-lists)
+msgid "Lists in TeX's mouth"
msgstr ""
-#. summary(texlive-pst-cox)
-msgid "Drawing regular complex polytopes with PSTricks"
+#. description(texlive-specs-m:texlive-lambda-lists)
+msgid ""
+"These list-processing macros avoid the reassignments employed in the macros shown in Appendix D of the TeXbook: all the manipulations take place in what Knuth is pleased to call \"TeX's mouth\".\n"
+"\n"
+"date: 2013-08-20 09:39:33 +0000"
msgstr ""
-#. summary(texlive-sparklines)
-msgid "Drawing sparklines: intense, simple, wordlike graphics"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lambda-lists-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-lambda-lists"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-luasseq)
-msgid "Drawing spectral sequences in LuaLaTeX"
-msgstr ""
+#. description(texlive-specs-m:texlive-lambda-lists-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lambda-lists"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-thick)
-msgid "Drawing very thick lines and curves"
+#. summary(texlive-specs-m:texlive-langcode)
+msgid "Simple language-dependent settings based on language codes"
msgstr ""
-#. description(texlive-typogrid)
+#. description(texlive-specs-m:texlive-langcode)
msgid ""
-"Draws a grid on every page of the document; the grid divides the page into columns, and may be used for fixing measurements of layout.\n"
+"The package provides a command \\uselangcode{<code>} to adjust language-dependent settings such as key words, typographical conventions and language codes (ISO 639-1). The package provides a means of selecting macros according to the specified code, for preparing a document that is to be separately typeset in different laguages. The package is dependent on the plainpkg package, and is already in use in the morehype and catcodes packages.\n"
"\n"
-"date: 2012-01-01 14:10:03 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xcolor)
-msgid "Driver-independent color extensions for LaTeX and pdfLaTeX"
-msgstr ""
+#. summary(texlive-specs-m:texlive-langcode-doc)
+#, fuzzy
+msgid "Documentation for texlive-langcode"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-logbox)
-msgid "E-TeX showbox facilities for exploration purposes"
-msgstr ""
+#. description(texlive-specs-m:texlive-langcode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-langcode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pxpgfmark)
-msgid "E-pTeX driver for PGF inter-picture connections"
+#. summary(texlive-specs-m:texlive-lapdf)
+msgid "PDF drawing directly in TeX documents"
msgstr ""
-#. description(texlive-semantic)
+#. description(texlive-specs-m:texlive-lapdf)
msgid ""
-"Eases the typesetting of notation of semantics and compilers. Includes T-diagrams, various derivation symbols and inference trees.\n"
+"The package provides the means to use PDF drawing primitives to produce high quality, colored graphics. It uses Bezier curves (integral and rational) from degree one to seven, allows TeX typesetting in the graphic, offers most of the standard math functions, allows plotting normal, parametric and polar functions. The package has linear, logx, logy, logxy and polar grids with many specs; it can rotate, clip and do many nice things easily it has two looping commands for programming and many instructive example files. The package requires pdfTeX but otherwise only depends on the calc package.\n"
"\n"
-"date: 2007-01-15 19:26:34 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-match_parens)
-msgid "Easily detect mismatched parens"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lapdf-doc)
+#, fuzzy
+msgid "Documentation for texlive-lapdf"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lipsum)
-msgid "Easy access to the Lorem Ipsum dummy text"
-msgstr ""
+#. description(texlive-specs-m:texlive-lapdf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lapdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-wallpaper)
-msgid "Easy addition of wallpapers (background images) to LaTeX documents, including tiling"
+#. summary(texlive-specs-m:texlive-lastpage)
+msgid "Reference last page for Page N of M type footers"
msgstr ""
-#. summary(texlive-synproof)
-msgid "Easy drawing of syntactic proofs"
+#. description(texlive-specs-m:texlive-lastpage)
+msgid ""
+"Reference the number of pages in your LaTeX document through the introduction of a new label which can be referenced like \\pageref{LastPage} to give a reference to the last page of a document. It is particularly useful in the page footer that says: Page N of M.\n"
+"\n"
+"date: 2013-01-29 09:13:54 +0000"
msgstr ""
-#. summary(texlive-substitutefont)
-msgid "Easy font substitution"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lastpage-doc)
+#, fuzzy
+msgid "Documentation for texlive-lastpage"
+msgstr "HTML dokumentace pro GNU C Library"
-#. summary(texlive-tikz-timing)
-msgid "Easy generation of timing diagrams as tikz pictures"
-msgstr ""
+#. description(texlive-specs-m:texlive-lastpage-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lastpage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-musixguit)
-msgid "Easy notation for guitar music, in MusixTeX"
+#. summary(texlive-specs-m:texlive-latex)
+msgid "A TeX macro package that defines LaTeX"
msgstr ""
-#. summary(texlive-makeplot)
-msgid "Easy plots from Matlab in LaTeX"
+#. description(texlive-specs-m:texlive-latex)
+msgid ""
+"LaTeX is a widely-used macro package for TeX, providing many basic document formating commands extended by a wide range of packages. It is a development of Leslie Lamport's LaTeX 2.09, and superseded the older system in June 1994. The basic distribution is catalogued separately, at latex-base; apart from a large set of contributed packages and third-party documentation (elsewhere on the archive), the distribution includes: - a bunch of required packages, which LaTeX authors are \"entitled to assume\" will be present on any system running LaTeX; and - a minimal set of documentation detailing differences from the 'old' version of LaTeX in the areas of user commands, font selection and control, class and package writing, font encodings, configuration options and modification of LaTeX. For downloading details, see the linked catalogue entries above.\n"
+"\n"
+"date: 2013-03-06 17:48:43 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-locateopen)
-msgid "Edit file without entering the whole path"
+#. summary(texlive-specs-m:texlive-latex-bib-ex)
+msgid "Examples for the book Bibliografien mit LaTeX"
msgstr ""
-#. description(texlive-tex-ewd)
+#. description(texlive-specs-m:texlive-latex-bib-ex)
msgid ""
-"Edsger W. Dijkstra and others suggest a unique style to present mathematical proofs and to construct programs. This package provides macros that support calculational proofs and Dijkstra's \"guarded command language\".\n"
+"The bundle provides a collection of files containing every example in the book \"Bibliografien mit LaTeX\" (ISBN 978- 3865414151), by the package author.\n"
"\n"
-"date: 2008-11-15 11:33:11 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pittetd)
-msgid "Electronic Theses and Dissertations at Pitt"
+#. summary(texlive-specs-m:texlive-latex-bin)
+msgid "LaTeX executables and man pages"
msgstr ""
-#. summary(vim-plugins:vim-plugin-minibufexpl)
-msgid "Elegant buffer explorer that takes very little screen space"
+#. description(texlive-specs-m:texlive-latex-bin)
+msgid "The latex-bin package"
msgstr ""
-#. summary(xemacs:xemacs-el)
-msgid "Emacs-Lisp source files for XEmacs"
-msgstr "Několik programů v Emacs-Lispu pro XEmacs"
+#. summary(texlive-specs-m:texlive-latex-brochure)
+#, fuzzy
+#| msgid "A fast metadata parser for yum"
+msgid "A publicity flyer for LaTeX"
+msgstr "Rychlý analyzátor metadat pro yum"
-#. summary(xemacs-packages:xemacs-packages-el)
-msgid "Emacs-Lisp source files for the XEmacs packages"
-msgstr "Emacs-Lisp zdrojové soubory pro XEmacs balíčky"
-
-#. summary(texlive-python)
-msgid "Embed Python code in LaTeX"
+#. description(texlive-specs-m:texlive-latex-brochure)
+msgid ""
+"The document is designed as a publicity flyer for LaTeX, but also serves as an interesting showcase of what LaTeX can do. The flyer is designed for printing, double-sided, on A3 paper, which would then be folded once.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-manuscript)
-msgid "Emulate look of a document typed on a typewriter"
+#. summary(texlive-specs-m:texlive-latex-course)
+msgid "A LaTeX course as a projected presentation"
msgstr ""
-#. summary(texlive-pst-vowel)
-msgid "Enable arrows showing diphthongs on vowel charts"
+#. description(texlive-specs-m:texlive-latex-course)
+msgid ""
+"A brief Beamer-based slide presentation on LaTeX, based on Rupprecht's LaTeX 2.09 course, which the author has translated to English and taken to LaTeX2e/Beamer. Additional material was taken from the Short Introduction to LaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex-label)
+#. summary(texlive-specs-m:texlive-latex-doc-ptr)
+#, fuzzy
+msgid "A direction-finder for LaTeX documentation"
+msgstr "Vývojářské balíky pro JACK"
+
+#. description(texlive-specs-m:texlive-latex-doc-ptr)
msgid ""
-"Enables the user to place a 'classification' label on each page, at the bottom to the right of the page number\n"
+"A two-page set of recommendations for users who need on-line documentation of LaTeX. The document supports the need for documentation of LaTeX itself, in distributions. For example, it could be used in the command texdoc latex, in the TeX Live distribution.\n"
"\n"
-"date: 2009-12-14 15:47:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-l2tabu-english)
-msgid "English translation of \"Obsolete packages and commands\""
-msgstr ""
+#. summary(texlive-specs-m:texlive-latex-fonts)
+#, fuzzy
+msgid "A collection of fonts used in LaTeX distributions"
+msgstr "Kolekce užitečných knihoven pro hry"
-#. description(texlive-l2tabu-english)
+#. description(texlive-specs-m:texlive-latex-fonts)
msgid ""
-"English translation of the l2tabu practical guide to LaTeX2e by Mark Trettin. A list of obsolete packages and commands.\n"
+"This is a collection of fonts for use with standard latex packages and classes. It includes 'invisible' fonts (for use with the slides class), line and circle fonts (for use in the picture environment) and 'latex symbol' fonts. For full support of a latex installation, some Computer Modern font variants cmbsy(6-9), cmcsc(8,9), cmex(7-9) and cmmib(5-9) from the amsfonts distribution, are also necessary. The fonts are available as Metafont source, and metric (tfm) files are also provided. Most of the fonts are also available in Adobe Type 1 format, in the amsfonts distribution.\n"
"\n"
-"date: 2008-03-16 16:19:11 +0000"
+"date: 2014-05-10 15:23:39 +0000"
msgstr ""
-#. summary(texlive-mciteplus)
-msgid "Enhanced multiple citations"
-msgstr ""
+#. summary(texlive-specs-m:texlive-latex-fonts-doc)
+#, fuzzy
+msgid "Documentation for texlive-latex-fonts"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ntheorem)
+#. description(texlive-specs-m:texlive-latex-fonts-doc)
#, fuzzy
-#| msgid "Korn Shell development environment"
-msgid "Enhanced theorem environment"
-msgstr "Vývojové prostředí Korn Shell"
+msgid "This package includes the documentation for texlive-latex-fonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-math)
-msgid "Enhancement of PostScript math operators to use with pstricks"
+#. summary(texlive-specs-m:texlive-latex-git-log)
+msgid "Typeset git log information"
msgstr ""
-#. description(texlive-ntheorem)
+#. description(texlive-specs-m:texlive-latex-git-log)
msgid ""
-"Enhancements for theorem-like environments: easier control of layout; proper placement of endmarks even when the environment ends with \\end{enumerate} or \\end{displaymath} (including support for amsmath displayed-equation environments); and support for making a list of theorems like \\listoffigures.\n"
+"The program is run within a git repository, and outputs the entire version history, as a LaTeX table. That output will typically be redirected to a file; the author recommends typesetting in landscape orientation.\n"
"\n"
-"date: 2012-03-30 13:19:52 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(typo3-cms-4_5)
-msgid "Enterprise Content Management System, Version 4.5.30"
-msgstr ""
+#. summary(texlive-specs-m:texlive-latex-git-log-doc)
+#, fuzzy
+msgid "Documentation for texlive-latex-git-log"
+msgstr "Dokumentace pro adaptx"
-#. description(typo3-cms-4_7)
-msgid "Enterprise Content Management System, Version 4.7.15"
-msgstr ""
+#. description(texlive-specs-m:texlive-latex-git-log-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latex-git-log"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-paralist)
-msgid "Enumerate and itemize within paragraphs"
+#. summary(texlive-specs-m:texlive-latex-graphics-companion)
+msgid "Examples from The LaTeX Graphics Companion"
msgstr ""
-#. summary(texlive-translation-enumitem-de)
-msgid "Enumitem documentation, in German"
+#. description(texlive-specs-m:texlive-latex-graphics-companion)
+msgid ""
+"The source of the examples printed in the book, together with necessary supporting files.\n"
+"\n"
+"date: 2012-05-22 09:10:15 +0000"
msgstr ""
-#. summary(texlive-midpage)
-#, fuzzy
-msgid "Environment for vertical centring"
-msgstr "Vývojářské prostředí pro CUPS"
-
-#. summary(texlive-subeqnarray)
-msgid "Equation array with sub numbering"
+#. summary(texlive-specs-m:texlive-latex-notes-zh-cn)
+msgid "Chinese Introduction to TeX and LaTeX"
msgstr ""
-#. summary(texlive-import)
-msgid "Establish input relative to a directory"
+#. description(texlive-specs-m:texlive-latex-notes-zh-cn)
+msgid ""
+"The document is an introduction to TeX/LaTeX, in Chinese. It covers basic text typesetting, mathematics, graphics, tables, Chinese language & fonts, and some miscellaneous features (hyperlinks, long documents, bibliographies, indexes and page layout).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pst-eucl)
-msgid "Euclidian geometry with pstricks"
+#. summary(texlive-specs-m:texlive-latex-referenz)
+msgid "Examples from the book \"LaTeX Referenz\""
msgstr ""
-#. description(texlive-struktex)
+#. description(texlive-specs-m:texlive-latex-referenz)
msgid ""
-"Even in the age of OOP one must develop algorithms. Nassi- Shneiderman diagrams are a well known tool to describe an algorithm in a graphical way. The package offers some macros for generating those diagrams in a LaTeX document. The package provides the most important elements of a Nassi-Shneiderman diagram, including processing blocks, loops, mapping conventions for alternatives, etc. Diagrams are drawn using the picture environment (using pict2e for preference).\n"
+"This bundle contains all the examples, as source, eps and pdf, of the author's book \"LaTeX Referenz\" (2nd ed.), published by DANTE/Lehmanns. The examples can be run, using the example class (ttctexa.cls) in the distribution.\n"
"\n"
-"date: 2012-04-11 09:11:10 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(wxWidgets-3_0:wxWidgets-3_0-devel-32bit)
-msgid "Everything needed for development with wxWidgets"
+#. summary(texlive-specs-m:texlive-latex-tabellen)
+msgid "LaTeX Tabellen"
msgstr ""
-#. summary(texlive-metapost-examples)
-msgid "Example drawings using MetaPost"
+#. description(texlive-specs-m:texlive-latex-tabellen)
+msgid ""
+"The examples from the book <<Tabellen mit LaTeX>>, 2nd ed.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-latex-bib-ex)
-msgid "Examples for the book Bibliografien mit LaTeX"
+#. summary(texlive-specs-m:texlive-latex-tds)
+msgid "A structured copy of the LaTeX distribution"
msgstr ""
-#. summary(texlive-tlc2)
-msgid "Examples from \"The LaTeX Companion\", second edition"
+#. description(texlive-specs-m:texlive-latex-tds)
+msgid ""
+"This bundle provides a set of zip file modules containing TDS- compliant trees for items of the LaTeX distribution (both the base system and required packages), together with 'user- friendly' documentation (PDF files with navigation support using bookmarks and links). A further module (knuth) performs the same service for Knuth's software distribution.\n"
+"\n"
+"date: 2014-05-16 06:01:22 +0000"
msgstr ""
-#. summary(texlive-pstricks-examples-en)
-msgid "Examples from PSTricks book (English edition)"
-msgstr ""
+#. summary(texlive-specs-m:texlive-latex-tds-doc)
+#, fuzzy
+msgid "Documentation for texlive-latex-tds"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-przechlewski-book)
-msgid "Examples from Przechlewski's LaTeX book"
+#. description(texlive-specs-m:texlive-latex-tds-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latex-tds"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-latex-veryshortguide)
+msgid "The Very Short Guide to LaTeX"
msgstr ""
-#. summary(texlive-latex-graphics-companion)
-msgid "Examples from The LaTeX Graphics Companion"
+#. description(texlive-specs-m:texlive-latex-veryshortguide)
+msgid ""
+"This is a 4-page reminder of what LaTeX does. It is designed for printing on A4 paper, double-sided, and folding once to A5. (Such an 'imposed' version of the document is provided in the distribution, as PDF.)\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-latex-web-companion)
+#. summary(texlive-specs-m:texlive-latex-web-companion)
msgid "Examples from The LaTeX Web Companion"
msgstr ""
-#. summary(texlive-koma-script-examples)
-msgid "Examples from the KOMA-Script book"
+#. description(texlive-specs-m:texlive-latex-web-companion)
+msgid ""
+"The source of the examples printed in the book, together with necessary supporting files.\n"
+"\n"
+"date: 2012-07-10 06:38:43 +0000"
msgstr ""
-#. summary(texlive-luaintro)
-msgid "Examples from the book \"Einfuhrung in LuaTeX und LuaLaTeX\""
+#. summary(texlive-specs-m:texlive-latex2e-help-texinfo)
+msgid "Unoffical reference manual covering LaTeX2e"
msgstr ""
-#. summary(texlive-latex-referenz)
-msgid "Examples from the book \"LaTeX Referenz\""
+#. description(texlive-specs-m:texlive-latex2e-help-texinfo)
+msgid ""
+"The manual is provided as Texinfo source (which was originally derived from the VMS help file in the DECUS TeX distribution of 1990, with many subsequent changes). This is a collaborative development, and details of getting involved are to be found on the package home page. All the other formats in the distribution are derived from the Texinfo source, as usual.\n"
+"\n"
+"date: 2014-05-20 11:50:35 +0000"
msgstr ""
-#. summary(texlive-tabulars-e)
-msgid "Examples from the book \"Typesetting tables with LaTeX\""
-msgstr ""
+#. summary(texlive-specs-m:texlive-latex2e-help-texinfo-spanish)
+msgid "Package latex2e-help-texinfo-spanish"
+msgstr "Balíček latex2e-help-texinfo-spanish"
-#. summary(texlive-presentations)
-msgid "Examples from the book Presentationen mit LaTeX"
+#. description(texlive-specs-m:texlive-latex2e-help-texinfo-spanish)
+msgid "The latex2e-help-texinfo-spanish package"
msgstr ""
-#. summary(texlive-presentations-en)
-msgid "Examples from the book Presentations with LaTeX"
+#. summary(texlive-specs-m:texlive-latex2man)
+msgid "Translate LaTeX-based manual pages into Unix man format"
msgstr ""
-#. summary(texlive-math-e)
-msgid "Examples from the book Typesetting Mathematics with LaTeX"
-msgstr ""
-
-#. description(texlive-mil3)
+#. description(texlive-specs-m:texlive-latex2man)
msgid ""
-"Examples, samples and templates from the third edition of Gratzer's book.\n"
+"A tool to translate UNIX manual pages written with LaTeX into a man-page format understood by the Unix man(1) command. Alternatively HTML or TexInfo code can be produced. Output of parts of the text may be supressed using the conditional text feature.\n"
"\n"
-"date: 2011-03-10 19:26:29 +0000"
+"date: 2012-06-09 08:33:16 +0000"
msgstr ""
-#. summary(texlive-lisp-on-tex)
+#. summary(texlive-specs-m:texlive-latex2man-doc)
#, fuzzy
-#| msgid "Syntax Checker for LaTeX Documents"
-msgid "Execute LISP code in a LaTeX document"
-msgstr "Program pro kontrolu syntaxe pro LaTeX"
+msgid "Documentation for texlive-latex2man"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-luacode)
-msgid ""
-"Executing Lua code from within TeX with directlua can sometimes be tricky: there is no easy way to use the percent character, counting backslashes may be hard, and Lua comments don't work the way you expect. The package provides the \\luaexec command and the luacode(*) environments to help with these problems.\n"
-"\n"
-"date: 2011-12-29 10:37:48 +0000"
+#. description(texlive-specs-m:texlive-latex2man-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latex2man"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-latex4wp)
+msgid "A LaTeX guide specifically designed for word processor users"
msgstr ""
-#. description(texlive-makeplot)
+#. description(texlive-specs-m:texlive-latex4wp)
msgid ""
-"Existing approaches to create EPS files from Matlab (laprint, mma2ltx, print -eps, etc.) aren't satisfactory; makeplot aims to resolve this problem. Makeplot is a LaTeX package that uses the pstricks pst-plot functions to plot data that it takes from Matlab output files.\n"
+"\"LaTeX for Word Processor Users\" is a guide that helps converting knowledge and techniques of word processing into the LaTeX typesetting environment. It aims at helping WP users use LaTeX instead.\n"
"\n"
-"date: 2008-01-20 01:03:54 +0000"
+"date: 2012-06-09 08:33:16 +0000"
msgstr ""
-#. summary(texlive-latexpand)
-msgid "Expand \\input and \\include in a LaTeX document"
+#. summary(texlive-specs-m:texlive-latex4wp-it)
+msgid "LaTeX guide for word processor users, in Italian"
msgstr ""
-#. summary(texlive-xoptarg)
-msgid "Expandable macros that take an optional argument"
+#. description(texlive-specs-m:texlive-latex4wp-it)
+msgid ""
+"The package provides a version of the document in Italian\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xint)
-msgid "Expandable operations on long numbers"
+#. summary(texlive-specs-m:texlive-latexcheat)
+msgid "A LaTeX cheat sheet"
msgstr ""
-#. summary(texlive-jamtimes)
-msgid "Expanded Times Roman fonts"
+#. description(texlive-specs-m:texlive-latexcheat)
+msgid ""
+"A LaTeX reference sheet for writing scientific papers. Unlike many other such sheets, this sheet does not focus on typesetting mathematics (though it does list some symbols).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-l3experimental)
-msgid "Experimental LaTeX3 concepts"
+#. summary(texlive-specs-m:texlive-latexcheat-esmx)
+msgid "A LaTeX cheat sheet, in Spanish"
msgstr ""
-#. summary(texlive-memexsupp)
-msgid "Experimental memoir support"
+#. description(texlive-specs-m:texlive-latexcheat-esmx)
+msgid ""
+"This is a translation to Spanish (Castellano) of Winston Chang's LaTeX cheat sheet (a reference sheet for writing scientific papers).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tamefloats)
-msgid "Experimentally use \\holdinginserts with LaTeX floats"
-msgstr ""
+#. summary(texlive-specs-m:texlive-latexcheat-ptbr)
+#, fuzzy
+#| msgid "YaST2 - Translations for Brazilian Portuguese."
+msgid "A LaTeX cheat sheet, in Brazilian Portuguese"
+msgstr "YaST2 - Překlady do brazilské portugalštiny."
-#. description(tomcat:tomcat-el-2_2-api)
-msgid "Expression Language 2.2."
-msgstr ""
+#. description(texlive-specs-m:texlive-latexcheat-ptbr)
+#, fuzzy
+msgid ""
+"This is a translation to Brazilian Portuguese of Winston Chang's LaTeX cheat sheet\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(tomcat:tomcat-el-2_2-api)
-msgid "Expression Language v2.2 API"
+#. summary(texlive-specs-m:texlive-latexconfig)
+msgid "Package latexconfig"
+msgstr "Balíček latexconfig"
+
+#. description(texlive-specs-m:texlive-latexconfig)
+msgid "The latexconfig package"
msgstr ""
-#. summary(texlive-smartref)
-msgid "Extend LaTeX's \\ref capability"
+#. summary(texlive-specs-m:texlive-latexdiff)
+msgid "Determine and mark up significant differences between latex files"
msgstr ""
-#. summary(texlive-jurabib)
-msgid "Extended BibTeX citation support for the humanities and legal texts"
+#. description(texlive-specs-m:texlive-latexdiff)
+msgid ""
+"Latexdiff is a Perl script for visual mark up and revision of significant differences between two latex files. Various options are available for visual markup using standard latex packages such as color. Changes not directly affecting visible text, for example in formatting commands, are still marked in the latex source. A rudimentary revision facilility is provided by another Perl script, latexrevise, which accepts or rejects all changes. Manual editing of the difference file can be used to override this default behaviour and accept or reject selected changes only.\n"
+"\n"
+"date: 2013-06-17 16:07:35 +0000"
msgstr ""
-#. summary(texlive-metalogo)
+#. summary(texlive-specs-m:texlive-latexdiff-doc)
#, fuzzy
-#| msgid "Extended Clipboard"
-msgid "Extended TeX logo macros"
-msgstr "Rozšířená schránka"
+msgid "Documentation for texlive-latexdiff"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ucs)
+#. description(texlive-specs-m:texlive-latexdiff-doc)
#, fuzzy
-msgid "Extended UTF-8 input encoding support for LaTeX"
-msgstr "Podpora Unicode pro LaTeX"
+msgid "This package includes the documentation for texlive-latexdiff"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pgfkeyx)
-msgid "Extended and more robust version of pgfkeys"
+#. summary(texlive-specs-m:texlive-latexfileinfo-pkgs)
+msgid "A comparison of packages showing LaTeX file information"
msgstr ""
-#. summary(texlive-xifthen)
-msgid "Extended conditional commands"
+#. description(texlive-specs-m:texlive-latexfileinfo-pkgs)
+msgid ""
+"The package provides an HTML file that lists and compares CTAN packages that display LaTeX source file information from \\ProvidesClass, \\ProvidesFile, and \\ProvidesPackage commands in the LaTeX file. Five packages of the author's, and several other packages are discussed; revision control systems are mentioned briefly.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-index)
-msgid "Extended index for LaTeX including multiple indexes"
-msgstr ""
-
-#. summary(texlive-yhmath)
+#. summary(texlive-specs-m:texlive-latexfileinfo-pkgs-doc)
#, fuzzy
-msgid "Extended maths fonts for LaTeX"
-msgstr "Zpracování témat pro GTK+"
+msgid "Documentation for texlive-latexfileinfo-pkgs"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-moreverb)
+#. description(texlive-specs-m:texlive-latexfileinfo-pkgs-doc)
#, fuzzy
-#| msgid "Extended Clipboard"
-msgid "Extended verbatim"
-msgstr "Rozšířená schránka"
+msgid "This package includes the documentation for texlive-latexfileinfo-pkgs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xhfill)
-msgid "Extending \\hrulefill"
+#. summary(texlive-specs-m:texlive-latexfileversion)
+msgid "Prints the version and date of a LaTeX class or style file"
msgstr ""
-#. summary(texlive-xpatch)
-msgid "Extending etoolbox patching commands"
+#. description(texlive-specs-m:texlive-latexfileversion)
+msgid ""
+"This simple shell script prints the version and date of a LaTeX class or style file. Syntax: latexfileversion <file> This programme handles style files (extension .sty), class files (extension .cls), and other tex input files. The file extension must be given.\n"
+"\n"
+"date: 2013-11-21 20:33:57 +0000"
msgstr ""
-#. summary(texlive-xdoc)
-msgid "Extending the LaTeX doc system"
+#. summary(texlive-specs-m:texlive-latexfileversion-doc)
+#, fuzzy
+msgid "Documentation for texlive-latexfileversion"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-m:texlive-latexfileversion-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latexfileversion"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-latexindent)
+msgid "Indent a LaTeX document, highlighting the programming structure"
msgstr ""
-#. description(texlive-shadethm)
+#. description(texlive-specs-m:texlive-latexindent)
msgid ""
-"Extends the \\newtheorem command. If you say \\newshadetheorem{theorem}{Theorem} in the preamble then your regular \\begin{theorem} .. \\end{theorem} will produce a theorem statement in a shaded box. It supports all the options of \\newtheorem, including forms \\newshadetheorem{..}[..]{..} and \\newshadetheorem{..}{..}[..].\n"
+"The Perl script (also available as a windows executable) processes a LaTeX file, indenting parts so as to highlight the structure for the reader.\n"
"\n"
-"date: 2010-11-03 23:16:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xkeyval)
-msgid "Extension of the keyval package"
-msgstr ""
+#. summary(texlive-specs-m:texlive-latexindent-doc)
+#, fuzzy
+msgid "Documentation for texlive-latexindent"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xpicture)
-msgid "Extensions of LaTeX picture drawing"
-msgstr ""
+#. description(texlive-specs-m:texlive-latexindent-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latexindent"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nfssext-cfr)
+#. summary(texlive-specs-m:texlive-latexmk)
#, fuzzy
-msgid "Extensions to the LaTeX NFSS"
-msgstr "SSL rozšíření k perl-ladp"
+#| msgid "Automated accessor generation"
+msgid "Fully automated LaTeX document generation"
+msgstr "Automatický accessor generátor"
-#. summary(texlive-skmath)
-msgid "Extensions to the maths command repertoir"
+#. description(texlive-specs-m:texlive-latexmk)
+msgid ""
+"Latexmk completely automates the process of generating a LaTeX document. Given the source files for a document, latexmk issues the appropriate sequence of commands to generate a .dvi, .ps, .pdf or hardcopy version of the document. An important feature is the \"preview continuous mode\", where the script watches all of the source files (primary file and included TeX and graphics files), and reruns LaTeX, etc., whenever a source file has changed. Thus a previewer can offer a display of the document's latest state.\n"
+"\n"
+"date: 2013-12-03 17:34:20 +0000"
msgstr ""
-#. summary(texlive-thmtools)
+#. summary(texlive-specs-m:texlive-latexmk-doc)
#, fuzzy
-msgid "Extensions to theorem environments"
-msgstr "SSL rozšíření k perl-ladp"
+msgid "Documentation for texlive-latexmk"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-txfontsb)
-msgid "Extensions to txfonts, using GNU Freefont"
+#. description(texlive-specs-m:texlive-latexmk-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latexmk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-latexmp)
+msgid "Interface for LaTeX-based typesetting in MetaPost"
msgstr ""
-#. description(texlive-sauter)
+#. description(texlive-specs-m:texlive-latexmp)
msgid ""
-"Extensions, originally to the CM fonts, providing a parameterization scheme to build MetaFont fonts at true design sizes, for a large range of sizes. The scheme has now been extended to a range of other fonts, including the AMS fonts, bbm, bbold, rsfs and wasy fonts.\n"
+"The MetaPost package latexMP implements a user-friendly interface to access LaTeX-based typesetting capabilities in MetaPost. The text to be typeset is given as string. This allows even dynamic text elements, for example counters, to be used in labels. Compared to other implementations it is much more flexible, since it can be used as direct replacement for btex..etex, and much faster, compared for example to the solution provided by tex.mp\n"
"\n"
-"date: 2008-12-30 20:17:11 +0000"
+"date: 2012-07-07 13:54:01 +0000"
msgstr ""
-#. summary(texlive-ifthenx)
+#. summary(texlive-specs-m:texlive-latexmp-doc)
#, fuzzy
-msgid "Extra tests for \\ifthenelse"
-msgstr "Standardní jádro"
+msgid "Documentation for texlive-latexmp"
+msgstr "Dokumentace pro adaptx"
-#. summary(vegastrike-extra)
-msgid "Extra textures and content for Vega Strike"
+#. description(texlive-specs-m:texlive-latexmp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-latexmp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-latexpand)
+msgid "Expand \\input and \\include in a LaTeX document"
msgstr ""
-#. description(vegastrike-extra)
+#. description(texlive-specs-m:texlive-latexpand)
msgid ""
-"Extra, optional texture files and content for Vega Strike, a GPL 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt.\n"
+"Latexpand is a Perl script that simply replaces \\input and \\include commands with the content of the file input/included. The script does not deal with \\includeonly commands.\n"
"\n"
-"This package is not essential for playing the game."
+"date: 2014-04-04 12:16:13 +0000"
msgstr ""
-#. summary(texlive-pax)
-msgid "Extract and reinsert PDF annotations with pdfTeX"
-msgstr ""
+#. summary(texlive-specs-m:texlive-latexpand-doc)
+#, fuzzy
+msgid "Documentation for texlive-latexpand"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-preview)
-msgid "Extract bits of a LaTeX source for output"
-msgstr ""
-
-#. summary(texlive-ktv-texdata)
+#. description(texlive-specs-m:texlive-latexpand-doc)
#, fuzzy
-#| msgid "Syntax Checker for LaTeX Documents"
-msgid "Extract subsets of documents"
-msgstr "Program pro kontrolu syntaxe pro LaTeX"
+msgid "This package includes the documentation for texlive-latexpand"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-varsfromjobname)
-msgid "Extract variables from the name of the LaTeX file"
+#. summary(texlive-specs-m:texlive-lato)
+msgid "Lato font family and LaTeX support"
msgstr ""
-#. summary(texlive-optional)
-msgid "Facilitate optional printing of parts of a document"
+#. description(texlive-specs-m:texlive-lato)
+msgid ""
+"Lato is a sanserif typeface family designed in the Summer 2010 by Warsaw-based designer Lukasz Dziedzic for the tyPoland foundry. This font, which includes five weights (hairline, light, regular, bold and black), is available from the Google Font Directory as TrueType files under the Open Font License version 1.1. The package provides support for this font in LaTeX. It includes the original TrueType fonts, as well as Type 1 versions, converted for this package using FontForge for full support with Dvips.\n"
+"\n"
+"date: 2014-05-07 16:10:38 +0000"
msgstr ""
-#. summary(texlive-postcards)
-msgid "Facilitates mass-mailing of postcards (junkmail)"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lato-doc)
+#, fuzzy
+msgid "Documentation for texlive-lato"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subfig)
-msgid "Figures broken into subfigures"
+#. description(texlive-specs-m:texlive-lato-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lato"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lato-fonts)
+msgid "Severed fonts for texlive-lato"
msgstr ""
-#. summary(texlive-pst-fill)
-msgid "Fill or tile areas with PSTricks"
+#. description(texlive-specs-m:texlive-lato-fonts)
+msgid "The separated fonts package for texlive-lato"
msgstr ""
-#. summary(texlive-pst-grad)
-msgid "Filling with colour gradients, using PStricks"
+#. summary(texlive-specs-m:texlive-layaureo)
+msgid "A package to improve the A4 page layout"
msgstr ""
-#. summary(texlive-totcount)
-msgid "Find the last value of a counter"
+#. description(texlive-specs-m:texlive-layaureo)
+msgid ""
+"This package produces a wide page layout for documents that use A4 paper size. Moreover, LayAureo provides both a simple hook for leaving an empty space which is required if pages are bundled by a press binding (use option binding=length), and an option called big which it forces typearea to become maximum.\n"
+"\n"
+"date: 2012-07-05 10:56:27 +0000"
msgstr ""
-#. summary(texlive-lshort-finnish)
+#. summary(texlive-specs-m:texlive-layaureo-doc)
#, fuzzy
-#| msgid "Finnish Dictionary Package"
-msgid "Finnish introduction to LaTeX"
-msgstr "Finský slovníkový balík"
+msgid "Documentation for texlive-layaureo"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-textfit)
-msgid "Fit text to a desired size"
-msgstr ""
+#. description(texlive-specs-m:texlive-layaureo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-layaureo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-minifp)
-msgid "Fixed-point real computations to 8 decimals"
+#. summary(texlive-specs-m:texlive-layouts)
+msgid "Display various elements of a document's layout"
msgstr ""
-#. summary(texlive-lualatex-math)
-msgid "Fixes for mathematics-related LuaLaTeX issues"
+#. description(texlive-specs-m:texlive-layouts)
+msgid ""
+"Display information about a document, including: text positioning on a page; disposition of floats; layout of paragraphs, lists, footnotes, table of contents, and sectional headings; font boxes. Facilities are provided for a document designer to experiment with the layout parameters.\n"
+"\n"
+"date: 2012-04-27 10:45:13 +0000"
msgstr ""
-#. summary(texlive-tabu)
-msgid "Flexible LaTeX tabulars"
-msgstr ""
+#. summary(texlive-specs-m:texlive-layouts-doc)
+#, fuzzy
+msgid "Documentation for texlive-layouts"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pagerange)
-msgid "Flexible and configurable page range typesetting"
-msgstr ""
+#. description(texlive-specs-m:texlive-layouts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-layouts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-natbib)
-msgid "Flexible bibliography support"
+#. summary(texlive-specs-m:texlive-lazylist)
+msgid "Lists in TeX's \"mouth\""
msgstr ""
-#. description(texlive-reverxii)
+#. description(texlive-specs-m:texlive-lazylist)
msgid ""
-"Following the lead of xii.tex, this little (938 characters) program that plays Reversi. (The program incorporates some primitive AI.)\n"
+"The package was developed to provide flexible lists, whose ordering can be altered on the fly. The implementation involves a pile of lambda-calculus and list-handling macros of an incredibly obtuse nature. The TUGboat paper serves as a manual for the macros. Having said all of which, confidence is enhanced by the knowledge that the TeX code was formally verified.\n"
"\n"
-"date: 2011-12-29 23:42:15 +0000"
+"date: 2012-05-10 15:39:23 +0000"
msgstr ""
-#. description(texlive-psnfss)
-msgid ""
-"Font definition files, macros and font metrics for freely- available Adobe Type 1 fonts. The font set consists of the 'LaserWriter 35' set (originally 'freely available' because embedded in PostScript printers), and a variety of other free fonts, together with some additions. Note that while many of the fonts are available in PostScript (and other) printers, most publishers require fonts embedded in documents, which requires that you have the fonts in your TeX system. Fortunately, there are free versions of the fonts from URW (available in the URW base5 bundle). The base set of text fonts covered by PSNFSS are: AvantGarde, Bookman, Courier, Helvetica, New Century Schoolbook, Palatino, Symbol, Times Roman and Zapf Dingbats. In addition, the fonts Bitstream Charter and Adobe Utopia are covered (those fonts were contributed to the Public Domain by their commercial foundries). Separate packages are provided to load each font for use as main text font. The packages helvet (which allows
Helvetica to be loaded with its size scaled to something more nearly appropriate for its use as a Sans-Serif font to match Times) and pifont (which provides the means to select single glyphs from symbol fonts) are tailored to special requirements of their fonts. Mathematics are covered by the mathptmx package, which constructs passable mathematics from a combination of Times Roman, Symbol and some glyphs from Computer Modern, and by Pazo Math (optionally extended with the fpl small-caps and old-style figures fonts) which uses Palatino as base font, with the mathpazo fonts. The bundle as a whole is part of the LaTeX 'required' set of packages.\n"
-"\n"
-"date: 2011-05-30 08:00:44 +0000"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lazylist-doc)
+#, fuzzy
+msgid "Documentation for texlive-lazylist"
+msgstr "Dokumentace pro castor"
-#. summary(tibetan-machine-uni-fonts)
-msgid "Font for Tibetan Script"
+#. description(texlive-specs-m:texlive-lazylist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lazylist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lcd)
+msgid "Alphanumerical LCD-style displays"
msgstr ""
-#. description(texlive-oldstyle)
+#. description(texlive-specs-m:texlive-lcd)
msgid ""
-"Font information needed to load the cmmi and cmmib fonts for use to produce oldstyle numbers.\n"
+"A LaTeX package that will display text as on an (early) LCD display (the output is very visibly pixellated). Assumes 8-bit input in its internal verbatim-style environment.\n"
"\n"
-"date: 2009-03-08 20:39:02 +0000"
+"date: 2012-08-30 20:39:52 +0000"
msgstr ""
-#. summary(texlive-Type1fonts)
+#. summary(texlive-specs-m:texlive-lcd-doc)
#, fuzzy
-msgid "Font installation guide"
-msgstr "SLES instalační příručka."
+msgid "Documentation for texlive-lcd"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-jfontmaps)
-msgid "Font maps and configuration tools for Japanese fonts"
-msgstr ""
-
-#. summary(texlive-plnfss)
+#. description(texlive-specs-m:texlive-lcd-doc)
#, fuzzy
-msgid "Font selection for Plain TeX"
-msgstr "Software pro certifikaci CD"
+msgid "This package includes the documentation for texlive-lcd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-psnfss)
+#. summary(texlive-specs-m:texlive-lcdftypetools)
#, fuzzy
-#| msgid "a2ps support for Korean PostScript filter (Python version)."
-msgid "Font support for common PostScript fonts"
-msgstr "a2ps podpora pro korejský postscriptový filtr (Python verze)."
+#| msgid "Ken Lunde's Japanese Code Manipulation Tools"
+msgid "A bundle of outline font manipulation tools"
+msgstr "Sada nástrojů pro manipulace s japonskými kódováními Kena Lundeho"
-#. description(tuladha-jejeg-fonts)
-msgid "Font supporting unicode codepoints from U+A980 to U+A9DF."
+#. description(texlive-specs-m:texlive-lcdftypetools)
+msgid ""
+"This bundle of tools comprises: Cfftot1, which translates a Compact Font Format (CFF) font, or a PostScript-flavored OpenType font, into PostScript Type 1 format. It correctly handles subroutines and hints; Mmafm and mmpfb, which create instances of multiple-master fonts (mmafm and mmpfb were previously distributed in their own package, mminstance); Otfinfo, which reports information about OpenType fonts, such as the features they support and the contents of their 'size' optical size features; Otftotfm, which creates TeX font metrics and encodings that correspond to a PostScript-flavored OpenType font. It will interpret glyph positionings, substitutions, and ligatures as far as it is able. You can say which OpenType features should be activated; T1dotlessj, creates a Type 1 font whose only character is a dotless j matching the input font's design; T1lint, which checks a Type 1 font for correctness; T1reencode, which replaces a font's internal encoding with one you specify; and T1te
stpage, which creates a PostScript proof for a Type 1 font. It is preliminary software.\n"
+"\n"
+"date: 2014-01-06 12:53:04 +0000"
msgstr ""
-#. summary(unidings-fonts)
-msgid "Font with Basic Icon Glyphs"
+#. summary(texlive-specs-m:texlive-lcg)
+msgid "Generate random integers"
msgstr ""
-#. description(texlive-wnri)
+#. description(texlive-specs-m:texlive-lcg)
msgid ""
-"Fonts (as Metafont source) for Old English, Indic languages in Roman transliteration and Puget Salish (Lushootseed) and other Native American languages.\n"
+"The lcg package generates random numbers (integers) via a linear congruential generator (Schrage's method). The random numbers are written to a counter. The keyval package is used for the user to provide values for the range and a seed, and for the name of the counter to be used.\n"
"\n"
-"date: 2011-05-05 22:38:04 +0000"
+"date: 2014-01-04 13:18:29 +0000"
msgstr ""
-#. summary(texlive-tipa)
-msgid "Fonts and macros for IPA phonetics characters"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lcg-doc)
+#, fuzzy
+msgid "Documentation for texlive-lcg"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-skak)
-msgid "Fonts and macros for typesetting chess games"
+#. description(texlive-specs-m:texlive-lcg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lcg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lcyw)
+msgid "Make Classic Cyrillic CM fonts accessible in LaTeX"
msgstr ""
-#. summary(texlive-pacioli)
-msgid "Fonts designed by Fra Luca de Pacioli in 1497"
+#. description(texlive-specs-m:texlive-lcyw)
+msgid ""
+"The package makes the classic CM Cyrillic fonts accessible for use with LaTeX.\n"
+"\n"
+"date: 2012-07-05 13:17:31 +0000"
msgstr ""
-#. summary(texlive-ocr-b)
+#. summary(texlive-specs-m:texlive-lcyw-doc)
#, fuzzy
-#| msgid "Core Fonts for X.Org"
-msgid "Fonts for OCR-B"
-msgstr "Základní písma X.Org"
+msgid "Documentation for texlive-lcyw"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uhc)
+#. description(texlive-specs-m:texlive-lcyw-doc)
#, fuzzy
-#| msgid "Fonts for the Khmer language of Cambodia"
-msgid "Fonts for the Korean language"
-msgstr "Písma pro Khmérštinu"
+msgid "This package includes the documentation for texlive-lcyw"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ogham)
-msgid "Fonts for typesetting Ogham script"
+#. summary(texlive-specs-m:texlive-leading)
+msgid "Define leading with a length"
msgstr ""
-#. summary(texlive-levy)
-msgid "Fonts for typesetting classical greek"
+#. description(texlive-specs-m:texlive-leading)
+msgid ""
+"The package defines a command \\leading, whose argument is a <length> that specifies the nominal distance between consecutive baselines of typeset text. The command replaces the rather more difficult LaTeX command \\linespread{<ratio>}, where the leading is specified by reference to the font size.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-trajan)
-msgid "Fonts from the Trajan column in Rome"
-msgstr ""
+#. summary(texlive-specs-m:texlive-leading-doc)
+#, fuzzy
+msgid "Documentation for texlive-leading"
+msgstr "Dokumentace pro adaptx"
-#. summary(unifraktur-fonts)
-msgid "Fonts from the UniFraktur project"
-msgstr ""
+#. description(texlive-specs-m:texlive-leading-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-leading"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mathpazo)
-msgid "Fonts to typeset mathematics to match Palatino"
+#. summary(texlive-specs-m:texlive-leaflet)
+msgid "Create small handouts (flyers)"
msgstr ""
-#. summary(texlive-umtypewriter)
-msgid "Fonts to typeset with the xgreek package"
+#. description(texlive-specs-m:texlive-leaflet)
+msgid ""
+"A document class to create small hand-outs (flyers) that fit on a single sheet of paper which is then folded twice. Pages are rearranged by LaTeX so that they print correctly on a single sheet -- no external script is necessary. (Works with PostScript and PDF.) This is a complete reimplementation with permission of the original author Jurgen Schlegelmilch.\n"
+"\n"
+"date: 2013-11-07 13:52:10 +0000"
msgstr ""
-#. summary(texlive-musixtex-fonts)
-msgid "Fonts used by MusixTeX"
-msgstr ""
+#. summary(texlive-specs-m:texlive-leaflet-doc)
+#, fuzzy
+msgid "Documentation for texlive-leaflet"
+msgstr "Dokumentace pro adaptx"
-#. summary(tuxpaint-stamps:tuxpaint-stamps-food)
-msgid "Food stamps collection for Tux Paint"
-msgstr ""
+#. description(texlive-specs-m:texlive-leaflet-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-leaflet"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-opcit)
-msgid "Footnote-style bibliographical references"
+#. summary(texlive-specs-m:texlive-lecturer)
+msgid "On-screen presentations for (almost) all formats"
msgstr ""
-#. description(texlive-pdfcomment)
+#. description(texlive-specs-m:texlive-lecturer)
msgid ""
-"For a long time pdfLaTeX has offered the command \\pdfannot for inserting arbitrary PDF annotations. However, the command is presented in a form where additional knowledge of the definition of the PDF format is indispensable. This package is an answer to the - occasional - questions in newsgroups, about how one could use the comment function of Adobe Reader. At least for the writer of LaTeX code, the package offers a convenient and user-friendly means of using \\pdfannot to provide comments in PDF files. Since version v1.1, pdfcomment.sty also supports LaTeX - dvips - ps2pdf, LaTeX - dvipdfmx, and XeLaTeX. Unfortunately, support of PDF annotations by PDF viewers is sparse to nonexistent. The reference viewer for the development of this package is Adobe Reader.\n"
+"The package creates slides for on-screen presentations based on PDF features without manipulating TeX's typesetting process. The presentation flow relies on PDF's abilities to display content step by step. Features include: Free positioning of anything anywhere in painted areas on the slide, as well as in the main textblock; Numerous attributes to control the layout and the presentation flow, from TeX's primitive dimensions to the visibility of steps; Feature inheritance from global to local settings, with intermediate types; Basic drawing facilities to produce symbols, e.g., for list items or buttons; Colors, transparency, shades, and pictures; Navigation with links, pop-up menus, and customizable bookmarks; Easy switch between presentation and handout; and PDF transitions. Besides the traditional documentation, the distribution includes visual documentation and six demo presentations ranging from geometric abstraction to classic style to silly video game. Lecturer is designed to
work with all formats, but presently fails with ConTeXt MkIV (because of clashes in management of PDF objects, probably), works only with pdfTeX and LuaTeX for the time being, and requires texapi and yax, both v.1.02.\n"
"\n"
-"date: 2012-09-28 13:59:23 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-initials)
+#. summary(texlive-specs-m:texlive-lecturer-doc)
+#, fuzzy
+msgid "Documentation for texlive-lecturer"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-m:texlive-lecturer-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lecturer"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. description(texlive-specs-m:texlive-ledmac)
msgid ""
-"For each font, at least an .pfb and .tfm file is provided, with a .fd file for use with LaTeX.\n"
+"A macro package for typesetting scholarly critical editions. The ledmac package is a LaTeX port of the plain TeX EDMAC macros. It supports indexing by page and line number and simple tabular- and array-style environments. The package is distributed with the related ledpar and ledarab packages. The package is now superseded by eledmac.\n"
"\n"
-"date: 2008-08-19 21:32:24 +0000"
+"date: 2013-06-14 22:57:55 +0000"
msgstr ""
-#. description(texlive-stdpage)
-msgid ""
-"For translations, proofreading, journal contributions etc. standard pages are used. Those standard pages consist of a fixed number of lines and characters per line. This package produces pages with n lines of at most m characters each. For instance the German \"Normseite\": 60 lines of 30 characters each.\n"
-"\n"
-"date: 2006-11-06 11:37:44 +0000"
+#. summary(texlive-specs-m:texlive-ledmac-doc)
+#, fuzzy
+msgid "Documentation for texlive-ledmac"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-ledmac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ledmac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-leftidx)
+msgid "Left and right subscripts and superscripts in math mode"
msgstr ""
-#. description(texlive-parrun)
+#. description(texlive-specs-m:texlive-leftidx)
msgid ""
-"For typesetting translated text and the original source, parallel on the same page, one above the other.\n"
+"Left and right subscripts and superscripts are automatically raised for better fitting to the symbol they belong to.\n"
"\n"
-"date: 2009-09-19 22:02:29 +0000"
+"date: 2012-06-01 19:24:39 +0000"
msgstr ""
-#. summary(texlive-multicap)
-msgid "Format captions inside multicols"
-msgstr ""
+#. summary(texlive-specs-m:texlive-leftidx-doc)
+#, fuzzy
+msgid "Documentation for texlive-leftidx"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texilikechaps)
-msgid "Format chapters with a texi-like format"
-msgstr ""
+#. description(texlive-specs-m:texlive-leftidx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-leftidx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-linguex)
-msgid "Format linguists' examples"
+#. summary(texlive-specs-m:texlive-leipzig)
+#. summary(texlive-specs-w:texlive-textglos)
+msgid "Typeset and index linguistic gloss abbreviations"
msgstr ""
-#. summary(texlive-interval)
-msgid "Format mathematical intervals, ensuring proper spacing"
+#. description(texlive-specs-m:texlive-leipzig)
+msgid ""
+"The leipzig package provides a set of macros for standard glossing abbreviations, with options to create new ones. They are mnemonic (e.g. \\Acc{} for accusative, abbreviated acc). These abbre can be used alone or on top of the glossaries package for easy indexing and glossary printing.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-menukeys)
-msgid "Format menu sequences, paths and keystrokes from lists"
-msgstr ""
+#. summary(texlive-specs-m:texlive-leipzig-doc)
+#, fuzzy
+msgid "Documentation for texlive-leipzig"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sageep)
-msgid "Format papers for the annual meeting of EEGS"
-msgstr ""
+#. description(texlive-specs-m:texlive-leipzig-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-leipzig"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-systeme)
-msgid "Format systems of equations"
+#. summary(texlive-specs-m:texlive-lengthconvert)
+msgid "Express lengths in arbitrary units"
msgstr ""
-#. summary(texlive-refman)
-msgid "Format technical reference manuals"
+#. description(texlive-specs-m:texlive-lengthconvert)
+msgid ""
+"The package provides a command to convert a length to any of a large selection of units. The package relies on the LaTeX 3 programming environment.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-meetingmins)
-msgid "Format written minutes of meetings"
+#. summary(texlive-specs-m:texlive-lengthconvert-doc)
+#, fuzzy
+msgid "Documentation for texlive-lengthconvert"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-lengthconvert-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lengthconvert"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lettre)
+msgid "Letters and faxes in French"
msgstr ""
-#. description(texlive-sgame)
+#. description(texlive-specs-m:texlive-lettre)
msgid ""
-"Formats strategic games. For a 2x2 game, for example, the input: \\begin{game}{2}{2} &$L$ &$M$\\\\ $T$ &$2,2$ &$2,0$\\\\ $B$ &$3,0$ &$0,9$ \\end{game} produces output with (a) boxes around the payoffs, (b) payoff columns of equal width, and (c) payoffs vertically centered within the boxes. Note that the game environment will not work in the argument of another command.\n"
+"Developed from the ancestor of the standard letter class, at the Observatoire de Geneve.\n"
"\n"
-"date: 2008-12-03 14:15:08 +0000"
+"date: 2013-10-10 08:12:24 +0000"
msgstr ""
-#. summary(texlive-mdframed)
-msgid "Framed environments that can split at page boundaries"
+#. summary(texlive-specs-m:texlive-lettre-doc)
+#, fuzzy
+msgid "Documentation for texlive-lettre"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-lettre-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lettre"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lettrine)
+msgid "Typeset dropped capitals"
msgstr ""
-#. description(texlive-velthuis)
+#. description(texlive-specs-m:texlive-lettrine)
msgid ""
-"Frans Velthuis' preprocessor for Devanagari text, and fonts and macros to use when typesetting the processed text. The macros provide features that support Sanskrit, Hindi, Marathi, Nepali, and other languages typically printed in the Devanagari script. The fonts are available both in Metafont and Type 1 format.\n"
+"The lettrine package supports various dropped capitals styles, typically those described in the French typographic books. In particular, it has facilities for the paragraph text's left edge to follow the outline of capitals that have a regular shape (such as \"A\" and \"V\").\n"
"\n"
-"date: 2011-07-25 12:21:08 +0000"
+"date: 2013-03-14 16:29:15 +0000"
msgstr ""
-#. summary(texlive-impatient)
-msgid "Free edition of the book \"TeX for the Impatient\""
+#. summary(texlive-specs-m:texlive-lettrine-doc)
+#, fuzzy
+msgid "Documentation for texlive-lettrine"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-lettrine-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lettrine"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-levy)
+msgid "Fonts for typesetting classical greek"
msgstr ""
-#. summary(texlive-texbytopic)
-msgid "Freed version of the book TeX by Topic"
+#. description(texlive-specs-m:texlive-levy)
+msgid ""
+"These fonts are derivatives of Kunth's CM fonts. Macros for use with Plain TeX are included in the package; for use with LaTeX, see lgreek (with English documentation) or levy (with German documentation).\n"
+"\n"
+"date: 2014-05-11 20:11:06 +0000"
msgstr ""
-#. summary(texlive-l2tabu-french)
+#. summary(texlive-specs-m:texlive-levy-doc)
#, fuzzy
-#| msgid "French Translations for KDE"
-msgid "French translation of l2tabu"
-msgstr "Francouzské překlady pro KDE"
+msgid "Documentation for texlive-levy"
+msgstr "Dokumentace pro gawk"
-#. description(texlive-l2tabu-french)
+#. description(texlive-specs-m:texlive-levy-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-levy"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lewis)
+msgid "Draw Lewis structures"
+msgstr ""
+
+#. description(texlive-specs-m:texlive-lewis)
msgid ""
-"French translation of l2tabu.\n"
+"The package provides rudimentary support for drawing Lewis Structures. Support is limited to elements that support the octet rule.\n"
"\n"
-"date: 2006-12-15 13:14:43 +0000"
+"date: 2012-07-05 20:19:39 +0000"
msgstr ""
-#. summary(texlive-translation-tabbing-fr)
+#. summary(texlive-specs-m:texlive-lewis-doc)
#, fuzzy
-msgid "French translation of the documentation of Tabbing"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-lewis"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-translation-array-fr)
+#. description(texlive-specs-m:texlive-lewis-doc)
#, fuzzy
-msgid "French translation of the documentation of array"
+msgid "This package includes the documentation for texlive-lewis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-translation-dcolumn-fr)
-msgid "French translation of the documentation of dcolumn"
+#. summary(texlive-specs-m:texlive-lexikon)
+msgid "Macros for a two language dictionary"
msgstr ""
-#. summary(texlive-translation-natbib-fr)
+#. description(texlive-specs-m:texlive-lexikon)
+msgid ""
+"The lexikon package\n"
+"\n"
+"date: 2012-08-30 20:39:52 +0000"
+msgstr ""
+
+#. summary(texlive-specs-m:texlive-lexikon-doc)
#, fuzzy
-msgid "French translation of the documentation of natbib"
+msgid "Documentation for texlive-lexikon"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-lexikon-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lexikon"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lshort-french)
-msgid ""
-"French version of A Short Introduction to LaTeX2e.\n"
-"\n"
-"date: 2011-06-16 18:49:53 +0000"
+#. summary(texlive-specs-m:texlive-lexref)
+msgid "Convenient and uniform references to legal provisions"
msgstr ""
-#. description(vollkorn-fonts)
+#. description(texlive-specs-m:texlive-lexref)
msgid ""
-"From the Vollkorn webpage: Vollkorn intends to be a quiet, modest, and well working text face. It has dark and meaty serifs and a bouncing and healthy look. It might be used as body type as well as for headlines or titles.\n"
+"The package is aimed at continental lawyers (especially those in Switzerland and Germany), allowing the user to make references to legal provisions conveniently and uniformly. The package also allows the user to add cited Acts to a nomenclature list (automatically), and to build specific indexes for each cited Act. The package is still under development, and should be treated as an 'alpha'-release.\n"
"\n"
-"»Vollkorn« (pronounced »Follkorn«) is German for »wholemeal« which refers to the old term »Brotschrift«."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-filesystem:texlive-scheme-full)
-msgid "Full scheme (everything)"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lexref-doc)
+#, fuzzy
+msgid "Documentation for texlive-lexref"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-latexmk)
+#. description(texlive-specs-m:texlive-lexref-doc)
#, fuzzy
-#| msgid "Automated accessor generation"
-msgid "Fully automated LaTeX document generation"
-msgstr "Automatický accessor generátor"
+msgid "This package includes the documentation for texlive-lexref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-filesystem:texlive-scheme-gust)
-msgid "GUST TeX Live scheme"
+#. summary(texlive-specs-m:texlive-lfb)
+msgid "A Greek font with normal and bold variants"
msgstr ""
-#. summary(texlive-loops)
+#. description(texlive-specs-m:texlive-lfb)
+msgid ""
+"This is a Greek font written in Metafont, with inspiration from the Bodoni typefaces in old books. It is stylistically a little more exotic than the standard textbook Greek fonts, particularly in glyphs like the lowercase rho and kappa. It aims for a rather calligraphic feel, but seems to blend well with Computer Modern. There is a ligature scheme which automatically inserts the breathings required for ancient texts, making the input text more readable than in some schemes.\n"
+"\n"
+"date: 2014-05-11 20:11:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-m:texlive-lfb-doc)
#, fuzzy
-#| msgid "KDE utility programs for laptop users"
-msgid "General looping macros for use with LaTeX"
-msgstr "Pomocné programu pro laptopy v KDE"
+msgid "Documentation for texlive-lfb"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mathalfa)
-msgid "General package for loading maths alphabets in LaTeX"
-msgstr ""
+#. description(texlive-specs-m:texlive-lfb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lfb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nextpage)
-msgid "Generalisations of the page advance commands"
+#. summary(texlive-specs-m:texlive-lgreek)
+msgid "LaTeX macros for using Silvio Levy's Greek fonts"
msgstr ""
-#. description(texlive-supertabular)
+#. description(texlive-specs-m:texlive-lgreek)
msgid ""
-"Generally longtable is a little easier to use and more flexible, but supertabular has its place, since it will work in a few situations where longtable won't.\n"
+"A conversion of Silvio Levy's Plain TeX macros for use with LaTeX.\n"
"\n"
-"date: 2009-10-09 22:51:28 +0000"
+"date: 2012-04-27 15:19:37 +0000"
msgstr ""
-#. summary(texlive-pedigree-perl)
-msgid "Generate TeX pedigree files from CSV files"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lgreek-doc)
+#, fuzzy
+msgid "Documentation for texlive-lgreek"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xunicode)
-msgid "Generate Unicode characters from accented glyphs"
-msgstr ""
+#. description(texlive-specs-m:texlive-lgreek-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lgreek"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ps2pkm)
-msgid "Generate a PK font from an Adobe Type 1 font"
+#. summary(texlive-specs-m:texlive-lh)
+msgid "Cyrillic fonts that support LaTeX standard encodings"
msgstr ""
-#. summary(texlive-mkjobtexmf)
-msgid "Generate a texmf tree for a particular job"
+#. description(texlive-specs-m:texlive-lh)
+msgid ""
+"The LH fonts address the problem of the wide variety of alphabets that are written with Cyrillic-style characters. The fonts are the original basis of the set of T2* and X2 encodings that are now used when LaTeX users need to write in Cyrillic languages. Macro support in standard LaTeX encodings is offered through the cyrillic and t2 bundles, and the package itself offers support for other (more traditional) encodings. The fonts, in the standard T2* and X2 encodings are available in Adobe Type 1 format, in the CM-Super family of fonts. The package also offers its own LaTeX support for OT2 encoded fonts, CM bright shaped fonts and Concrete shaped fonts.\n"
+"\n"
+"date: 2014-05-11 20:11:06 +0000"
msgstr ""
-#. summary(texlive-smartdiagram)
-msgid "Generate diagrams from lists"
+#. summary(texlive-specs-m:texlive-lh-doc)
+#, fuzzy
+msgid "Documentation for texlive-lh"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-lh-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lh"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lhcyr)
+msgid "A non-standard Cyrillic input scheme"
msgstr ""
-#. summary(texlive-patgen)
-msgid "Generate hyphenation patterns"
+#. description(texlive-specs-m:texlive-lhcyr)
+msgid ""
+"A collection of three LaTeX 2e styles intended for typesetting Russian and bilingual English-Russian documents, using the lh fonts and without the benefit of babel's language-switching mechanisms. The packages (lhcyralt and lhcyrwin for use under emTeX, and lhcyrkoi for use under teTeX) provide mappings between the input encoding and the font encoding (which is described as OT1). The way this is done does not match the way inputenc would do the job, for output via fontenc to one of the T2 series of font encodings.\n"
+"\n"
+"date: 2014-05-11 20:11:06 +0000"
msgstr ""
-#. summary(texlive-invoice)
-msgid "Generate invoices"
-msgstr "Generujte faktury"
+#. summary(texlive-specs-m:texlive-lhelp)
+#, fuzzy
+msgid "Miscellaneous helper packages"
+msgstr "Různé"
-#. summary(texlive-logpap)
-msgid "Generate logarithmic graph paper with LaTeX"
+#. description(texlive-specs-m:texlive-lhelp)
+msgid ""
+"This package defines macros which are useful for many documents. It is a large collection of simple 'little helpers' which do not really warrant a separate package on their own. Included are, among other things, definitions of common units with preceeding thinspaces, framed boxes where both width and height can be specified, starting new odd or even pages, draft markers, notes, conditional includes, including EPS files, and versions of enumerate and itemize which allow the horizontal and vertical spacing to be changed.\n"
+"\n"
+"date: 2012-05-22 09:10:15 +0000"
msgstr ""
-#. summary(texlive-pdfmarginpar)
-msgid "Generate marginpar-equivalent PDF annotations"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lhelp-doc)
+#, fuzzy
+msgid "Documentation for texlive-lhelp"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-newcommand)
-msgid "Generate new LaTeX command definitions"
-msgstr ""
+#. description(texlive-specs-m:texlive-lhelp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lhelp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-probsoln)
-msgid "Generate problem sheets and their solution sheets"
+#. summary(texlive-specs-m:texlive-libertine)
+msgid "Use of Linux Libertine and Biolinum fonts with LaTeX"
msgstr ""
-#. summary(texlive-lcg)
-msgid "Generate random integers"
+#. description(texlive-specs-m:texlive-libertine)
+msgid ""
+"The package provides the Libertine and Biolinum fonts in both Type 1 and OTF styles, together with support macros for their use. Monospaced and display fonts, and the \"keyboard\" set are also included, in OTF style, only. The mweights package is used to manage the selection of font weights. The package supersedes both the libertineotf and the libertine-legacy packages.\n"
+"\n"
+"date: 2014-05-11 20:01:43 +0000"
msgstr ""
-#. summary(texlive-romannum)
-msgid "Generate roman numerals instead of arabic digits"
-msgstr ""
+#. summary(texlive-specs-m:texlive-libertine-doc)
+#, fuzzy
+msgid "Documentation for texlive-libertine"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-kantlipsum)
-msgid "Generate sentences in Kant's style"
-msgstr ""
+#. description(texlive-specs-m:texlive-libertine-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-libertine"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-slideshow)
-msgid "Generate slideshow with MetaPost"
-msgstr ""
+#. summary(texlive-specs-m:texlive-libertine-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-libertine"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-timetable)
-msgid "Generate timetables"
+#. description(texlive-specs-m:texlive-libertine-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-libertine"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-m:texlive-libgreek)
+msgid "Use Libertine or Biolinum Greek glyphs in mathematics"
msgstr ""
-#. description(texlive-ps2pkm)
+#. description(texlive-specs-m:texlive-libgreek)
msgid ""
-"Generates a PK file from an Adobe Type 1 font. PK fonts are (or used to be) valuable in enabling previewers to view documents generated that use Type 1 fonts. The program makes use of code donated to the X consortium by IBM.\n"
+"The package is for LaTeX users who wish to use the Libertine or Biolinum font for the Greek letters in math mode. It is not necessary to load the libertine package itself, but of course the Linux-Libertine/Biolinum fonts and LaTeX support files must have been installed.\n"
"\n"
-"date: 2012-07-20 18:39:39 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-listbib)
-msgid ""
-"Generates listings of bibliographic data bases in BibTeX format\n"
-"-- for example for archival purposes. Included is a listbib.bst which is better suited for this purpose than the standard styles.\n"
-"\n"
-"date: 2012-04-21 18:14:11 +0000"
+#. summary(texlive-specs-m:texlive-libgreek-doc)
+#, fuzzy
+msgid "Documentation for texlive-libgreek"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-libgreek-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-libgreek"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-librarian)
+msgid "Tools to create bibliographies in TeX"
msgstr ""
-#. description(texlive-newcommand)
+#. description(texlive-specs-m:texlive-librarian)
msgid ""
-"Generating any other than the simple \\newcommand-style commands, in LaTeX, is tedious (in the least). This script allows the specification of commands in a 'natural' style; the script then generates macros to define the command.\n"
+"The package extracts information in bib files, makes it available in the current document, and sorts lists of entries according to that information and the user's specifications. Citation and bibliography styles can then be written directly in TeX, without any use of BibTeX. Creating references thus depends entirely on the user's skill in TeX. The package works with all formats that use plain TeX's basic syntactic sugar; the distribution includes a third-party file for ConTeXt and a style file for LaTeX. As an example of use, an Author (Year) style is given in a separate file and explained in the documentation.\n"
"\n"
-"date: 2010-06-02 14:01:13 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-iso)
-msgid "Generic ISO standards typesetting macros"
-msgstr ""
+#. summary(texlive-specs-m:texlive-librarian-doc)
+#, fuzzy
+msgid "Documentation for texlive-librarian"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. description(texlive-iso)
+#. description(texlive-specs-m:texlive-librarian-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-librarian"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-librebaskerville)
+#, fuzzy
+msgid "LaTeX support for the Libre Baskerville family of fonts"
+msgstr "XML podpora pro castor"
+
+#. description(texlive-specs-m:texlive-librebaskerville)
msgid ""
-"Generic class and package files for typesetting ISO International Standard documents. Several standard documents have been printed by ISO from camera-ready copy prepared using LaTeX and these files.\n"
+"Libre Baskerville is designed by Pablo Impallari. It is primarily intended to be a web font but is also attractive as a TeX font. As there is currently no bold italic variant, an artificially slanted version of the bold variant has been generated.\n"
"\n"
-"date: 2007-01-09 13:09:22 +0000"
+"date: 2014-05-11 20:01:43 +0000"
msgstr ""
-#. summary(texlive-pst-geo)
+#. summary(texlive-specs-m:texlive-librebaskerville-doc)
#, fuzzy
-#| msgid "Geographical Information System"
-msgid "Geographical Projections"
-msgstr "GIS"
+msgid "Documentation for texlive-librebaskerville"
+msgstr "Dokumentace pro adaptx"
-#. summary(xtables-geoip)
-msgid "Geolocation database files for xt_geoip"
-msgstr ""
+#. description(texlive-specs-m:texlive-librebaskerville-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-librebaskerville"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-schulschriften)
-msgid "German \"school scripts\" from Suetterlin to the present day"
-msgstr ""
+#. summary(texlive-specs-m:texlive-librebaskerville-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-librebaskerville"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pauldoc)
-msgid "German LaTeX package documentation"
-msgstr ""
+#. description(texlive-specs-m:texlive-librebaskerville-fonts)
+#, fuzzy
+#| msgid "Development package for libstroke"
+msgid "The separated fonts package for texlive-librebaskerville"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-umlaute)
-msgid "German input encodings in LaTeX"
+#. summary(texlive-specs-m:texlive-librecaslon)
+msgid "Libre Caslon fonts, with LaTeX support"
msgstr ""
-#. summary(texlive-translation-biblatex-de)
-msgid "German translation of the documentation of biblatex"
+#. description(texlive-specs-m:texlive-librecaslon)
+msgid ""
+"The Libre Caslon fonts are designed by Pablo Impallari. Although they have been designed for use as web fonts, they work well as conventional text fonts. A bold italic variant is not currently available. As a stopgap, an artificially slanted bold variant has been created and treated as italic.\n"
+"\n"
+"date: 2014-05-11 20:01:43 +0000"
msgstr ""
-#. summary(texlive-tipa-de)
+#. summary(texlive-specs-m:texlive-librecaslon-doc)
#, fuzzy
-#| msgid "German translations for KOffice"
-msgid "German translation of tipa documentation"
-msgstr "Německé překlady pro KOffice"
+msgid "Documentation for texlive-librecaslon"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lshort-german)
-msgid "German version of A Short Introduction to LaTeX2e: LaTeX2e-Kurzbeschreibung"
-msgstr ""
+#. description(texlive-specs-m:texlive-librecaslon-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-librecaslon"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-translation-arsclassica-de)
+#. summary(texlive-specs-m:texlive-librecaslon-fonts)
#, fuzzy
-msgid "German version of arsclassica"
-msgstr "KDE klient pro Subversion"
+msgid "Severed fonts for texlive-librecaslon"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-translation-chemsym-de)
-msgid "German version of chemsym"
-msgstr ""
+#. description(texlive-specs-m:texlive-librecaslon-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-librecaslon"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-translation-europecv-de)
-msgid "German version of europecv"
+#. summary(texlive-specs-m:texlive-libris)
+msgid "Libris ADF fonts, with LaTeX support"
msgstr ""
-#. summary(texlive-translation-ecv-de)
-msgid "German version of evc"
+#. description(texlive-specs-m:texlive-libris)
+msgid ""
+"LibrisADF is a sans-serif family designed to mimic Lydian. The bundle includes: fonts, in Adobe Type 1, TrueType and OpenType formats, and LaTeX support macros, for use with the Type 1 versions of the fonts. The LaTeX macros depend on the nfssext- cfr bundle. GPL licensing applies the fonts themselves; the support macros are distributed under LPPL licensing.\n"
+"\n"
+"date: 2014-05-11 20:01:43 +0000"
msgstr ""
-#. summary(texlive-translation-filecontents-de)
-msgid "German version of filecontents"
+#. summary(texlive-specs-m:texlive-libris-doc)
+#, fuzzy
+msgid "Documentation for texlive-libris"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-m:texlive-libris-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-libris"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-libris-fonts)
+msgid "Severed fonts for texlive-libris"
msgstr ""
-#. summary(texlive-translation-moreverb-de)
-msgid "German version of moreverb"
+#. description(texlive-specs-m:texlive-libris-fonts)
+msgid "The separated fonts package for texlive-libris"
msgstr ""
-#. summary(texlive-zwgetfdate)
-msgid "Get package or file date"
+#. summary(texlive-specs-m:texlive-lilyglyphs)
+msgid "Access lilypond fragments and glyphs, in LaTeX"
msgstr ""
-#. description(texlive-tabularcalc)
+#. description(texlive-specs-m:texlive-lilyglyphs)
msgid ""
-"Given a list of numbers and one (or more) formulas, the package offers an easy syntax to build a table of values, i.e., a tabular in which the first row contains the list of numbers, and the other rows contain the calculated values of the formulas for each number of the list. The table may be built either horizontally or vertically and is fully customizable.\n"
+"The package provides the means to include arbitrary elements of Lilypond notation, including symbols from Lilypond's Emmentaler font, in a LaTeX document. The package uses OpenType fonts, and as a result must be compiled with LuaLaTeX or XeLaTeX.\n"
"\n"
-"date: 2009-04-21 22:12:47 +0000"
+"date: 2014-05-11 20:01:43 +0000"
msgstr ""
-#. summary(texlive-warning)
-msgid "Global warnings at the end of the logfile"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lilyglyphs-doc)
+#, fuzzy
+msgid "Documentation for texlive-lilyglyphs"
+msgstr "Dokumentace pro adaptx"
-#. summary(tkxcd)
-msgid "Graphical frontend for diff"
-msgstr ""
+#. description(texlive-specs-m:texlive-lilyglyphs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lilyglyphs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texdraw)
-msgid "Graphical macros, using embedded PostScript"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lilyglyphs-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-lilyglyphs"
+msgstr "Vývojářský balík pro libstroke"
-#. description(yast2-lxc)
-msgid "Graphical management tool for Linux Containers (LXC)"
-msgstr ""
+#. description(texlive-specs-m:texlive-lilyglyphs-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-lilyglyphs"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-keystroke)
-msgid "Graphical representation of keys on keyboard"
+#. summary(texlive-specs-m:texlive-limap)
+msgid "Typeset maps and blocks according to the Information Mapping method"
msgstr ""
-#. summary(texlive-swimgraf)
-msgid "Graphical/textual representations of swimming performances"
+#. description(texlive-specs-m:texlive-limap)
+msgid ""
+"The Information Mapping method provides a methodology for structuring and presenting information. It claims to be useful for readers who are more concerned about finding the right information than reading the document as a whole. Thus short, highly structured, and context free pieces of information are used. A LaTeX style and a LaTeX class are provided. The style contains definitions to typeset maps and blocks according to the Information Mapping method. The class provides all definitions to typeset a whole document.\n"
+"\n"
+"date: 2012-04-03 16:09:05 +0000"
msgstr ""
-#. summary(texlive-xwatermark)
-msgid "Graphics and text watermarks on selected pages"
-msgstr ""
+#. summary(texlive-specs-m:texlive-linearA)
+#, fuzzy
+#| msgid "Additional scripts for ant"
+msgid "Linear A script fonts"
+msgstr "Další skripty pro ant"
-#. summary(texlive-yannisgr)
-msgid "Greek fonts by Yannis Haralambous"
+#. description(texlive-specs-m:texlive-linearA)
+msgid ""
+"The linearA package provides a simple interface to two fonts which include all known symbols, simple and complex, of the Linear A script. This way one can easily replicate Linear A \"texts\" using modern typographic technology. Note that the Linear A script has not been deciphered yet and probably never will be deciphered.\n"
+"\n"
+"date: 2014-05-11 20:35:08 +0000"
msgstr ""
-#. summary(texlive-lgrx)
-msgid "Greek text with the LGR font encoding"
-msgstr ""
+#. summary(texlive-specs-m:texlive-linearA-doc)
+#, fuzzy
+msgid "Documentation for texlive-linearA"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-lualatex-doc-de)
+#. description(texlive-specs-m:texlive-linearA-doc)
#, fuzzy
-#| msgid "YaST2 - German translations."
-msgid "Guide to LuaLaTeX (German translation)"
-msgstr "YaST2 - Německé překlady"
+msgid "This package includes the documentation for texlive-linearA"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(w3mir)
-msgid "HTTP Copying and Mirroring Tool"
-msgstr "Nástroj pro kopírování a zrcadlení pomocí protokolu HTTP"
+#. summary(texlive-specs-m:texlive-linearA-fonts)
+msgid "Severed fonts for texlive-linearA"
+msgstr ""
-#. summary(texlive-iwhdp)
-msgid "Halle Institute for Economic Research (IWH) Discussion Papers"
+#. description(texlive-specs-m:texlive-linearA-fonts)
+msgid "The separated fonts package for texlive-linearA"
msgstr ""
-#. description(texlive-visualfaq)
+#. summary(texlive-specs-m:texlive-linegoal)
+msgid "A \"dimen\" that returns the space left on the line"
+msgstr ""
+
+#. description(texlive-specs-m:texlive-linegoal)
msgid ""
-"Having trouble finding the answer to a LaTeX question? The Visual LaTeX FAQ is an innovative new search interface that presents over a hundred typeset samples of frequently requested document formatting. Simply click on a hyperlinked piece of text and the Visual LaTeX FAQ will send your Web browser to the appropriate page in the UK TeX FAQ.\n"
+"The linegoal package provides a macro \\linegoal to be used with \\setlength: \\setlength<some dimen>\\linegoal will set <some dimen> to the horizontal length of the remainder of the line. This is achieved using the \\pdfsavepos primitive of pdftex, through the zref-savepos package. Example: Some text: \\begin{tabularx}\\linegoal{|l|X|} \\hline one & two \\\\ three & four \\\\\\hline \\end{tabularx} will position the table after the initial text, and make the table fill the rest of the line.\n"
"\n"
-"date: 2010-08-05 11:03:35 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-semantic)
+#. summary(texlive-specs-m:texlive-linegoal-doc)
#, fuzzy
-#| msgid "Write Perl subroutines in other programming languages"
-msgid "Help for writing programming language semantics"
-msgstr "Nástroj pro psaní perlových rutin v jiných programovacích jazycích"
+msgid "Documentation for texlive-linegoal"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luacode)
-msgid "Helper for executing lua code from within TeX"
+#. description(texlive-specs-m:texlive-linegoal-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-linegoal"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lineno)
+msgid "Line numbers on paragraphs"
msgstr ""
-#. description(texlive-xecyr)
+#. description(texlive-specs-m:texlive-lineno)
msgid ""
-"Helper tools for using Cyrillic languages with XeLaTeX and babel.\n"
+"Adds line numbers to selected paragraphs with reference possible through the LaTeX \\ref and \\pageref cross reference mechanism. Line numbering may be extended to footnote lines, using the fnlineno package.\n"
"\n"
-"date: 2010-10-26 11:00:58 +0000"
+"date: 2012-04-21 18:14:11 +0000"
msgstr ""
-#. summary(texlive-universa)
-msgid "Herbert Bayer's 'universal' font"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lineno-doc)
+#, fuzzy
+msgid "Documentation for texlive-lineno"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-regexpatch)
-msgid "High level patching of commands"
-msgstr ""
+#. description(texlive-specs-m:texlive-lineno-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lineno"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-l3packages)
-msgid "High-level LaTeX3 concepts"
+#. summary(texlive-specs-m:texlive-linguex)
+msgid "Format linguists' examples"
msgstr ""
-#. summary(texlive-minted)
-msgid "Highlighted source code for LaTeX"
+#. description(texlive-specs-m:texlive-linguex)
+msgid ""
+"This bundle comprises two packages: The linguex package facilitates the formatting of linguist examples, automatically taking care of example numbering, indentations, indexed brackets, and the '*' in grammaticality judgments. The ps-trees package provides linguistic trees, building on the macros of tree-dvips, but overcoming some of the older package's shortcomings.\n"
+"\n"
+"date: 2014-01-06 12:53:04 +0000"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-hobbies)
-msgid "Hobbies stamps collection for Tux Paint"
-msgstr ""
+#. summary(texlive-specs-m:texlive-linguex-doc)
+#, fuzzy
+msgid "Documentation for texlive-linguex"
+msgstr "Dokumentace pro adaptx"
-#. summary(tuxpaint-stamps:tuxpaint-stamps-household)
-msgid "Household items stamps collection for Tux Paint"
-msgstr ""
+#. description(texlive-specs-m:texlive-linguex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-linguex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-svg-inkscape)
-msgid "How to include an SVG image in LaTeX using Inkscape"
+#. summary(texlive-specs-m:texlive-lipsum)
+msgid "Easy access to the Lorem Ipsum dummy text"
msgstr ""
-#. summary(texlive-pxjahyper)
-msgid "Hyperref support for pLaTeX"
+#. description(texlive-specs-m:texlive-lipsum)
+msgid ""
+"This package gives you easy access to the Lorem Ipsum dummy text; an option is available to separate the paragraphs of the dummy text into TeX-paragraphs. All the paragraphs are taken with permission from http://lipsum.com/.\n"
+"\n"
+"date: 2012-03-12 20:18:36 +0000"
msgstr ""
-#. summary(texlive-morehype)
-msgid "Hypertext tools for use with LaTeX"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lipsum-doc)
+#, fuzzy
+msgid "Documentation for texlive-lipsum"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ukrhyph)
+#. description(texlive-specs-m:texlive-lipsum-doc)
#, fuzzy
-#| msgid "YaST2 - Translations for Ukrainian."
-msgid "Hyphenation Patterns for Ukrainian"
-msgstr "YaST2 - překlad do ukrajinštiny."
+msgid "This package includes the documentation for texlive-lipsum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-soul)
-msgid "Hyphenation for letterspacing, underlining, and more"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lisp-on-tex)
+#, fuzzy
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Execute LISP code in a LaTeX document"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
-#. summary(texlive-ieeepes)
-msgid "IEEE Power Engineering Society Transactions"
+#. description(texlive-specs-m:texlive-lisp-on-tex)
+msgid ""
+"The package provides a LISP interpreter written using TeX macros; it is provided as a LaTeX package. The interpreter static scoping, dynamic typing, and eager evaluation.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-imtekda)
-msgid "IMTEK thesis class"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lisp-on-tex-doc)
+#, fuzzy
+msgid "Documentation for texlive-lisp-on-tex"
+msgstr "Dokumentace pro adaptx"
-#. summary(xtables-addons:xtables-addons-kmp-pae)
-msgid "IP Packet Filter Administration Extensions"
-msgstr ""
+#. description(texlive-specs-m:texlive-lisp-on-tex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lisp-on-tex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ipaex)
-msgid "IPA and IPAex fonts from Information-technology Promotion Agency, Japan"
+#. summary(texlive-specs-m:texlive-listbib)
+msgid "Lists contents of BibTeX files"
msgstr ""
-#. summary(texlive-ipaex-type1)
-msgid "IPAex fonts converted to Type-1 format Unicode subfonts"
+#. description(texlive-specs-m:texlive-listbib)
+msgid ""
+"Generates listings of bibliographic data bases in BibTeX format\n"
+"-- for example for archival purposes. Included is a listbib.bst which is better suited for this purpose than the standard styles.\n"
+"\n"
+"date: 2012-04-21 18:14:11 +0000"
msgstr ""
-#. summary(virtualbox:virtualbox-guest-desktop-icons)
-msgid "Icons for guest desktop files"
-msgstr ""
+#. summary(texlive-specs-m:texlive-listbib-doc)
+#, fuzzy
+msgid "Documentation for texlive-listbib"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pax)
-msgid ""
-"If PDF files are included using pdfTeX, PDF annotations are stripped. The pax project offers a solution without altering pdfTeX. A Java program (pax.jar) parses the PDF file that will later be included. The program then writes the data of the annotations into a file that can be read by TeX. The LaTeX package pax extends the graphics package to support the scheme: if a PDF file is included, the package looks for the file with the annotation data, reads them and puts the annotations in the right place. Project status: experimental\n"
-"\n"
-"date: 2012-04-18 14:26:37 +0000"
+#. description(texlive-specs-m:texlive-listbib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-listbib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-listing)
+msgid "Produce formatted program listings"
msgstr ""
-#. description(texlive-notoccite)
+#. description(texlive-specs-m:texlive-listing)
msgid ""
-"If you have \\cite commands in \\section-like commands, or in \\caption, the citation will also appear in the table of contents, or list of whatever. If you are also using an unsrt- like bibliography style, these citations will come at the very start of the bibliography, which is confusing. This package suppresses the effect.\n"
+"The listing environment is provided and is similar to figure and table, although it is not a floating environment. Includes support for \\caption, \\label, \\ref, and introduces \\listoflistings, \\listingname, \\listlistingname. It produces a .lol file. It does not change \\@makecaption (unless the option bigcaptions is used), so packages that change the layout of \\caption still work.\n"
"\n"
-"date: 2010-05-11 10:36:30 +0000"
+"date: 2012-04-21 18:16:35 +0000"
msgstr ""
-#. summary(texlive-ifmtarg)
-msgid "If-then-else command for processing potentially empty arguments"
-msgstr ""
+#. summary(texlive-specs-m:texlive-listing-doc)
+#, fuzzy
+msgid "Documentation for texlive-listing"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-mirror)
-msgid "Images on a spherical mirror"
-msgstr ""
+#. description(texlive-specs-m:texlive-listing-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-listing"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-kix)
-msgid ""
-"Implements KIX codes as used by the Dutch PTT for bulk mail addressing. (Royal Mail 4 State Code.) KIX is a registered trade mark of PTT Post Holdings B. V.\n"
-"\n"
-"date: 2011-03-04 10:12:16 +0000"
+#. summary(texlive-specs-m:texlive-listings)
+msgid "Typeset source code listings using LaTeX"
msgstr ""
-#. description(texlive-mparhack)
+#. description(texlive-specs-m:texlive-listings)
msgid ""
-"Implements a workaround for the LaTeX bug that marginpars will sometimes come out at the wrong margin.\n"
+"The package enables the user to typeset programs (programming code) within LaTeX; the source code is read directly by TeX--no front-end processor is needed. Keywords, comments and strings can be typeset using different styles (default is bold for keywords, italic for comments and no special style for strings). Support for hyperref is provided. To use, \\usepackage{listings}, identify the language of the object to typeset, using a construct like: \\lstset{language=Python}, then use environment lstlisting for inline code. External files may be formatted using \\lstinputlisting to process a given file in the form appropriate for the current language. Short (in-line) listings are also available, using either \\lstinline|...| or |...| (after defining the | token with the \\lstMakeShortInline command).\n"
"\n"
-"date: 2006-10-22 14:45:29 +0000"
+"date: 2014-03-04 21:18:45 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-snipmate)
-msgid "Implements some of TextMate's snippets features in Vim"
+#. summary(texlive-specs-m:texlive-listings-doc)
+#, fuzzy
+msgid "Documentation for texlive-listings"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-listings-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-listings"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-listings-ext)
+msgid "Automated input of source"
msgstr ""
-#. description(texlive-jura)
+#. description(texlive-specs-m:texlive-listings-ext)
msgid ""
-"Implements the standard layout for German term papers in law (one-and-half linespacing, 7 cm margins, etc.). Includes alphanum that permits alphanumeric section numbering (e.g., A. Introduction; III. International Law).\n"
+"The package provides a means of marking a source, so that samples of it may be included in a document (by means of the listings package) in a stable fashion, regardless of any change to the source. The markup in the source text defines tags for blocks of source. These tags are processed by a shell script to make a steering file that is used by the package when LaTeX is being run.y\n"
"\n"
-"date: 2007-01-08 13:12:54 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tikzinclude)
-msgid "Import TikZ images from colletions"
-msgstr ""
+#. summary(texlive-specs-m:texlive-listings-ext-doc)
+#, fuzzy
+msgid "Documentation for texlive-listings-ext"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-noitcrul)
-msgid "Improved underlines in mathematics"
+#. description(texlive-specs-m:texlive-listings-ext-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-listings-ext"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-listliketab)
+msgid "Typeset lists as tables"
msgstr ""
-#. description(texlive-pfarrei)
+#. description(texlive-specs-m:texlive-listliketab)
msgid ""
-"In \"Die TeXnische Komodie\" (issue 1/2013) Christian Justen described his use of LaTeX in his work as priest (similar requirements may be encountered in the work of pastors and other ministers of religion). One point was to arrange A5 pages onto A4 landscape paper, either side-by-side or as a booklet. Justen made two bash scripts for this job; the package provides one texlua script for both requirements. (Note that file a5toa4.tlu should have execute permissions in any installation.)\n"
+"The listliketab package helps the user make list-like tabulars, i.e., a tabular that is indistinguishable from an itemize or enumerate environment. The advantage of using a tabular is that the user can add additional columns to each entry in the list.\n"
"\n"
-"date: 2013-04-08 16:29:05 +0000"
+"date: 2012-07-07 14:18:52 +0000"
msgstr ""
-#. description(texlive-tikzpfeile)
+#. summary(texlive-specs-m:texlive-listliketab-doc)
+#, fuzzy
+msgid "Documentation for texlive-listliketab"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-m:texlive-listliketab-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-listliketab"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-listofsymbols)
+#, fuzzy
+msgid "Create and manipulate lists of symbols"
+msgstr "Fukce pro práci s datem"
+
+#. description(texlive-specs-m:texlive-listofsymbols)
msgid ""
-"In a document with a lot of diagrams created with PGF/TikZ, there is a possibility of the reader being distracted by different sorts of arrowheads in the diagrams and in the text (as, e.g., in \\rightarrow). The package defines macros to create all arrows using PGF/TikZ, so as to avoid the problem.\n"
+"Listofsymbols provides commands to automatically create a list of symbols (also called notation or nomenclature), and to handle symbols logically, i.e. define a macro that is expanded to the desired output and use the macro in the text rather than `hardcoding' the output into the text. This helps to ensure consistency throughout the text, especially if there is a chance that symbols will be changed at some stage. The package is more or less a combination of what the packages nomencl and formula do. The concept of creating the list of symbols, though, is different from the way nomencl.sty does it.\n"
"\n"
-"date: 2012-03-28 21:45:32 +0000"
+"date: 2012-07-07 14:18:52 +0000"
msgstr ""
-#. description(texlive-philosophersimprint)
+#. summary(texlive-specs-m:texlive-listofsymbols-doc)
+#, fuzzy
+msgid "Documentation for texlive-listofsymbols"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-listofsymbols-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-listofsymbols"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lithuanian)
+#, fuzzy
+msgid "Lithuanian language support"
+msgstr "Běhová javová knihovna pro gcc"
+
+#. description(texlive-specs-m:texlive-lithuanian)
msgid ""
-"In its mission statement we read \"Philosophers' Imprint is a refereed series of original papers in philosophy, edited by philosophy faculty at the University of Michigan, with the advice of an international Board of Editors, and published on the World Wide Web by the University of Michigan Digital Library. The mission of the Imprint is to promote a future in which funds currently spent on journal subscriptions are redirected to the dissemination of scholarship for free, via the Internet\". The class helps authors to typeset their own articles in \"Web-ready\" format. No assumption is made about the fonts available to the author: the class itself is restricted to freely available and freely distributed fonts, only.\n"
+"This language support package provides: Lithuanian language hyphenation patterns; Lithuanian support for Babel; Lithuanian mapping and metrics for using the URW base-35 Type 1 fonts; examples for making Lithuanian fonts with fontinst; and extra tools for intputenc and fontenc.\n"
"\n"
-"date: 2013-01-15 08:51:57 +0000"
+"date: 2014-05-11 20:35:08 +0000"
msgstr ""
-#. summary(texlive-mmap)
-msgid "Include CMap resources in PDF files from PDFTeX"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lithuanian-doc)
+#, fuzzy
+msgid "Documentation for texlive-lithuanian"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pdfpages)
-msgid "Include PDF documents in LaTeX"
-msgstr ""
+#. description(texlive-specs-m:texlive-lithuanian-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lithuanian"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-makeglos)
-msgid "Include a glossary into a document"
+#. summary(texlive-specs-m:texlive-liturg)
+msgid "Support for typesetting Catholic liturgical texts"
msgstr ""
-#. summary(texlive-svg)
-msgid "Include and extract SVG pictures using Inkscape"
+#. description(texlive-specs-m:texlive-liturg)
+msgid ""
+"The packages offers simple macros for typesetting Catholic liturgical texts, particularly Missal and Breviary texts. The package assumes availability of Latin typesetting packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xmpincl)
-msgid "Include eXtensible Metadata Platform data in PDFLaTeX"
+#. summary(texlive-specs-m:texlive-liturg-doc)
+#, fuzzy
+msgid "Documentation for texlive-liturg"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-m:texlive-liturg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-liturg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lkproof)
+msgid "LK Proof figure macros"
msgstr ""
-#. description(texlive-midnight)
+#. description(texlive-specs-m:texlive-lkproof)
msgid ""
-"Included are: - quire: making booklets, etc.; - gloss: vertically align words in consecutive sentences; - loop: a looping construct; - dolines: 'meta'-macros to separate arguments by newlines; - labels: address labels and bulk mail letters; - styledef: selectively input part of a file; and - border: borders around boxes.\n"
+"The package defines a pair of commands \\infer and \\deduce, that are used in constructing LK proof diagrams.\n"
"\n"
-"date: 2008-11-09 10:56:27 +0000"
+"date: 2014-05-12 04:57:13 +0000"
msgstr ""
-#. summary(unixODBC:unixODBC-devel-32bit)
-msgid "Includes for ODBC Development"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lkproof-doc)
+#, fuzzy
+msgid "Documentation for texlive-lkproof"
+msgstr "Dokumentace pro adaptx"
-#. description(unixODBC:unixODBC-devel-32bit)
-msgid "Includes for ODBC development (based on unixODBC)."
-msgstr ""
+#. description(texlive-specs-m:texlive-lkproof-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lkproof"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-revtex)
-msgid ""
-"Includes styles for American Physical Society, American Institute of Physics, and Optical Society of America. The distribution consists of the RevTeX class itself, and several support packages.\n"
-"\n"
-"date: 2010-08-12 11:35:15 +0000"
+#. summary(texlive-specs-m:texlive-lm)
+msgid "Latin modern fonts in outline formats"
msgstr ""
-#. description(texlive-inconsolata)
+#. description(texlive-specs-m:texlive-lm)
msgid ""
-"Inconsolata is a monospaced font designed by Raph Levien. This package contains the font (in both Adobe Type 1 and OpenType formats), metric files for use with TeX, and LaTeX font definition and other relevant files.\n"
+"The Latin Modern family of fonts consists of 72 text fonts and 20 mathematics fonts, and is based on the Computer Modern fonts released into public domain by AMS (copyright (c) 1997 AMS). The lm font set contains a lot of additional characters, mainly accented ones, but not exclusively. There is one set of fonts, available both in Adobe Type 1 format (*.pfb) and in OpenType format (*.otf). There are five sets of TeX Font Metric files, corresponding to: Cork encoding (cork-*.tfm); QX encoding (qx-\n"
+"*.tfm); TeX'n'ANSI aka LY1 encoding (texnansi-*.tfm); T5 (Vietnamese) encoding (t5-*.tfm); and Text Companion for EC fonts aka TS1 (ts1-*.tfm).\n"
"\n"
-"date: 2010-09-07 13:05:43 +0000"
+"date: 2014-05-11 20:35:08 +0000"
msgstr ""
-#. summary(texlive-metatex)
-msgid "Incorporate MetaFont pictures in TeX source"
-msgstr ""
+#. summary(texlive-specs-m:texlive-lm-doc)
+#, fuzzy
+msgid "Documentation for texlive-lm"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rvwrite)
-msgid "Increase the number of available output streams in LaTeX"
+#. description(texlive-specs-m:texlive-lm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-m:texlive-lm-fonts)
+msgid "Severed fonts for texlive-lm"
msgstr ""
-#. summary(texlive-morefloats)
-msgid "Increase the number of simultaneous LaTeX floats"
+#. description(texlive-specs-m:texlive-lm-fonts)
+msgid "The separated fonts package for texlive-lm"
msgstr ""
-#. summary(xemacs:xemacs-info)
-msgid "Info Files for XEmacs"
-msgstr "Info soubory pro Xemacs"
+#. summary(texlive-specs-n:texlive-lm-math)
+#, fuzzy
+msgid "OpenType maths fonts for Latin Modern"
+msgstr "Zpracování témat pro GTK+"
-#. summary(xemacs-packages:xemacs-packages-info)
-msgid "Info Files for the XEmacs Packages"
-msgstr "Info soubory pro Xemacs"
-
-#. description(texlive-texinfo)
+#. description(texlive-specs-n:texlive-lm-math)
msgid ""
-"Info is the preferred format for documentation in the GNU project; the format may be used to produce online or printed output from a single source. The Texinfo macros may be used to produce printable output using TeX; other programs in the distribution offer online interactive use (with hypertext linkages in some cases). Note that a developers' snapshot of the latest working version of the Texinfo macros may be found in the Texinfo 'latest' package.\n"
+"Latin Modern Math is a maths companion for the Latin Modern family of fonts, in OpenType format. For use with LuaLaTeX or XeLaTeX, support is available from the unicode-math package.\n"
"\n"
-"date: 2013-03-10 16:22:46 +0000"
+"date: 2014-05-11 20:35:08 +0000"
msgstr ""
-#. summary(texlive-regstats)
+#. summary(texlive-specs-n:texlive-lm-math-doc)
#, fuzzy
-msgid "Information about register use"
-msgstr "Nejsou dostupné žádné informace."
+msgid "Documentation for texlive-lm-math"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-onlyamsmath)
-msgid "Inhibit use of non-amsmath mathematics markup when using amsmath"
-msgstr ""
+#. description(texlive-specs-n:texlive-lm-math-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lm-math"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-inlinedef)
-msgid "Inline expansions within definitions"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lm-math-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-lm-math"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-rtkinenc)
-msgid "Input encoding with fallback procedures"
-msgstr ""
+#. description(texlive-specs-n:texlive-lm-math-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-lm-math"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-xevlna)
-msgid "Insert non-breakable spaces using XeTeX"
+#. summary(texlive-specs-n:texlive-lmake)
+msgid "Process lists to do repetitive actions"
msgstr ""
-#. summary(texlive-needspace)
-msgid "Insert pagebreak if not enough space"
+#. description(texlive-specs-n:texlive-lmake)
+msgid ""
+"The package provides commands to simplify processing of sequential list-like structures, such as making a series of 'similar' commands from a list of names.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-picinpar)
-msgid "Insert pictures into paragraphs"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lmake-doc)
+#, fuzzy
+msgid "Documentation for texlive-lmake"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-placeins-plain)
-msgid "Insertions that keep their place"
-msgstr ""
+#. description(texlive-specs-n:texlive-lmake-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lmake"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-plweb)
-msgid ""
-"Instead of having to transform the common source into program or documentation, the central idea was to develop a method to have one common source which can be interpreted by a Prolog system as well as by LaTeX, whether that Prolog system be C- Prolog, Quintus-Prolog, or ECLiPSe.\n"
-"\n"
-"date: 2008-09-11 16:52:21 +0000"
+#. summary(texlive-specs-n:texlive-lobster2)
+msgid "Lobster Two fonts, with support for all LaTeX engines"
msgstr ""
-#. description(texlive-newlfm)
+#. description(texlive-specs-n:texlive-lobster2)
msgid ""
-"Integrates the letter class with fancyhdr and geometry to automatically make letterhead stationery. Useful for writing letters, fax, and memos. You can set up an address book using 'wrapper' macros. You put all the information for a person into a wrapper and then put the wrapper in a document. The class handles letterheads automatically. You place the object for the letterhead (picture, information, etc.) in a box and all sizing is set automatically.\n"
+"Lobster Two is a family of script fonts designed bt Pablo Impallari. It has many ligatures and terminal forms, but most of these can be accessed only using XeLaTeX or LuaLaTeX. Font access and use is supported in LaTeX.\n"
"\n"
-"date: 2009-04-12 17:35:00 +0000"
+"date: 2014-05-12 23:37:53 +0000"
msgstr ""
-#. summary(texlive-notes2bib)
-msgid "Integrating notes into the bibliography"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lobster2-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-lobster2"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-prerex)
-msgid "Interactive editor and macro support for prerequisite charts"
-msgstr ""
+#. description(texlive-specs-n:texlive-lobster2-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lobster2"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latexmp)
-msgid "Interface for LaTeX-based typesetting in MetaPost"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lobster2-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-lobster2"
+msgstr "Dokumentace pro adaptx"
-#. summary(yast2-trans-allpacks)
-msgid "Internal: Require all YaST Translation Packages (Empty)"
+#. description(texlive-specs-n:texlive-lobster2-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-lobster2"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-n:texlive-locality)
+msgid "Various macros for keeping things local"
msgstr ""
-#. summary(texlive-imac)
-msgid "International Modal Analysis Conference format"
+#. description(texlive-specs-n:texlive-locality)
+msgid ""
+"A toolbox of macros designed to allow the LaTeX programmer to work around some of the restrictions of the TeX grouping mechanisms. The present release offers a preliminary view of the package; not all of its facilities are working optimally\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-wsuipa)
+#. summary(texlive-specs-n:texlive-locality-doc)
#, fuzzy
-#| msgid "The International Phonetic Alphabet font for the X Window System."
-msgid "International Phonetic Alphabet fonts"
-msgstr "Mezinárodní fonetická abeceda jako písmo pro X11."
+msgid "Documentation for texlive-locality"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-SIunits)
+#. description(texlive-specs-n:texlive-locality-doc)
#, fuzzy
-#| msgid "International Components for Unicode"
-msgid "International System of Units"
-msgstr "Mezinárodní komponenty pro Unicode"
+msgid "This package includes the documentation for texlive-locality"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pagecolor)
-msgid "Interrogate page colour"
-msgstr ""
+#. summary(texlive-specs-n:texlive-localloc)
+#, fuzzy
+msgid "Macros for localizing TeX register allocations"
+msgstr "Thajské překlady pro KDE"
-#. summary(texlive-intro-scientific)
-msgid "Introducing scientific/mathematical documents using LaTeX"
+#. description(texlive-specs-n:texlive-localloc)
+msgid ""
+"This package approaches the problem of the shortage of registers, by providing a mechanism for local allocation. The package works with Plain TeX, LaTeX and LaTeX 2.09.\n"
+"\n"
+"date: 2012-07-16 16:45:50 +0000"
msgstr ""
-#. summary(texlive-lshort-dutch)
-msgid "Introduction to LaTeX in Dutch"
-msgstr ""
+#. summary(texlive-specs-n:texlive-localloc-doc)
+#, fuzzy
+msgid "Documentation for texlive-localloc"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lshort-italian)
-msgid "Introduction to LaTeX in Italian"
-msgstr ""
+#. description(texlive-specs-n:texlive-localloc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-localloc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lshort-polish)
-msgid "Introduction to LaTeX in Polish"
+#. summary(texlive-specs-n:texlive-logbox)
+msgid "E-TeX showbox facilities for exploration purposes"
msgstr ""
-#. summary(texlive-lshort-portuguese)
-msgid "Introduction to LaTeX in Portuguese"
+#. description(texlive-specs-n:texlive-logbox)
+msgid ""
+"The command \\logbox does \\showbox without stopping the compilation. The package's main command is \\viewbox*: the box is typeset (copied) with its dimensions, and its contents are logged in the .log file.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lshort-thai)
-msgid "Introduction to LaTeX in Thai"
-msgstr ""
+#. summary(texlive-specs-n:texlive-logbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-logbox"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lshort-chinese)
-msgid "Introduction to LaTeX, in Chinese"
+#. description(texlive-specs-n:texlive-logbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-logbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-logical-markup-utils)
+msgid "Packages for language-dependent inline quotes and dashes"
msgstr ""
-#. description(tkfont)
-msgid "It is a program similar to xfontsel."
-msgstr "Program podobající se xfontsel."
-
-#. description(wammu)
+#. description(texlive-specs-n:texlive-logical-markup-utils)
msgid ""
-"It works with any phone that Gammu supports, including many models from Nokia, Siemens, and Alcatel. It has complete support (read, edit, delete, copy) for contacts, todo, and calendar. It can read, save, and send SMS. It includes an SMS composer for multi-part SMS messages, and it can display SMS messages that include pictures. Currently, only text and predefined bitmaps or sounds can be edited in the SMS composer. It can export messages to an IMAP4 server (or other email storage).\n"
+"The bundle contains two packages: quoted, for inserting quotation marks; and onedash, for inserting dashes. Each package takes a language name as an option; accepted language options are american, british, german and polish.\n"
"\n"
-"This program does not support browsing files in phone, use gMobileMedia instead."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-l2tabu-italian)
-msgid "Italian Translation of Obsolete packages and commands"
+#. summary(texlive-specs-n:texlive-logical-markup-utils-doc)
+#, fuzzy
+#| msgid "Documentation for javamail."
+msgid "Documentation for texlive-logical-markup-utils"
+msgstr "Dokumentace javamail."
+
+#. description(texlive-specs-n:texlive-logical-markup-utils-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-logical-markup-utils"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-logicproof)
+msgid "Box proofs for propositional and predicate logic"
msgstr ""
-#. description(texlive-l2tabu-italian)
+#. description(texlive-specs-n:texlive-logicproof)
msgid ""
-"Italian translation of the l2tabu practical guide to LaTeX2e (a list of obsolete packages and commands).\n"
+"A common style of proof used in propositional and predicate logic is Fitch proofs, in which each line of the proof has a statement and a justification, and subproofs within a larger proof have boxes around them. The package provides environments for typesetting such proofs and boxes. It creates proofs in a style similar to that used in \"Logic in Computer Science\" by Huth and Ryan.\n"
"\n"
-"date: 2011-09-20 22:42:21 +0000"
+"date: 2014-03-27 17:52:36 +0000"
msgstr ""
-#. summary(texlive-xetex-itrans)
-msgid "Itrans input maps for use with XeLaTeX"
+#. summary(texlive-specs-n:texlive-logicproof-doc)
+#, fuzzy
+msgid "Documentation for texlive-logicproof"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-logicproof-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-logicproof"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-logicpuzzle)
+msgid "Typeset (grid-based) logic puzzles"
msgstr ""
-#. description(texlive-iwona)
+#. description(texlive-specs-n:texlive-logicpuzzle)
msgid ""
-"Iwona is a two-element sans-serif typeface. It was created as an alternative version of the Kurier typeface, which was designed in 1975 for a diploma in typeface design at the Warsaw Academy of Fine Arts under the supervision of Roman Tomaszewski. This distribution contains a significantly extended set of characters covering the following modern alphabets: latin (including Vietnamese), Cyrillic and Greek as well as a number of additional symbols (including mathematical symbols). The fonts are prepared in Type 1 and OpenType formats. For use with TeX the following encoding files have been prepared: T1 (ec), T2 (abc), and OT2--Cyrillic, T5 (Vietnamese), OT4, QX, texansi and nonstandard (IL2 for the Czech fonts), as well as supporting macros and files defining fonts for LaTeX.\n"
+"The package allows the user to typeset various logic puzzles. At the moment the following puzzles are supported: 2D-Sudoku (aka Magiequadrat, Diagon, ...), Battleship (aka Bimaru, Marinespiel, Batalla Naval, ...), Bokkusu (aka Kakurasu, Feldersummenratsel, ...), Bridges (akak Bruckenbau, Hashi, ...), Chaos Sudoku, Four Winds (aka Eminent Domain, Lichtstrahl, ...), Hakyuu (aka Seismic, Ripple Effect, ...), Hitori, Kakuro, Kendoku (aka Mathdoku, Calcudoku, Basic, MiniPlu, Ken Ken, Square Wisdom, Sukendo, Caldoku, ..., Killer Sudoku (aka Samunapure, Sum Number Place, Sumdoku, Gebietssummen, ...), Laser Beam (aka Laserstrahl, ...), Magic Labyrinth (aka Magic Spiral, Magisches Labyrinth, ...), Magnets (aka Magnetplatte, Magnetfeld, ...), Masyu (aka Mashi, {White|Black} Pearls, ...), Minesweeper (aka Minensuche, ...), Number Link, Resuko, Schatzsuche, Skyline (aka Skycrapers, Wolkenkratzer, Hochhauser, ...), including Skyline Sudoku and Skyline Sudoku (N*N) variants, Slitherlink (aka Fen
ces, Number Line, Dotty Dilemma, Sli-Lin, Takegaki, Great Wall of China, Loop the Loop, Rundweg, Gartenzaun, ...), Star Battle (aka Sternenschlacht, ...), Stars and Arrows (aka Sternenhimmel, ...), Sudoku, Sun and Moon (aka Sternenhaufen, Munraito, ...), Tents and Trees (aka Zeltlager, Zeltplatz, Camping, ...), and Tunnel.\n"
"\n"
-"date: 2010-08-03 18:49:06 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(xml-commons:xml-commons-jaxp-1.2-apis)
-msgid "JAXP 1.2, DOM 2, SAX 2.0.1, SAX2-ext 1.0 apis"
-msgstr ""
+#. summary(texlive-specs-n:texlive-logicpuzzle-doc)
+#, fuzzy
+msgid "Documentation for texlive-logicpuzzle"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pxchfon)
-msgid "Japanese font setup for pLaTeX and upLaTeX"
+#. description(texlive-specs-n:texlive-logicpuzzle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-logicpuzzle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-logpap)
+msgid "Generate logarithmic graph paper with LaTeX"
msgstr ""
-#. summary(texlive-lshort-japanese)
-msgid "Japanese version of A Short Introduction to LaTeX2e"
+#. description(texlive-specs-n:texlive-logpap)
+msgid ""
+"The logpap package provides four macros for drawing logarithmic-logarithmic, logarithmic-linear, linear-logarithmic and (because it was easy to implement) linear-linear graph paper with LaTeX.\n"
+"\n"
+"date: 2012-07-17 11:06:42 +0000"
msgstr ""
-#. summary(xalan-j2:xalan-j2-xsltc)
-msgid "Java XSLT compiler"
-msgstr "Java XSLT compilátor"
+#. summary(texlive-specs-n:texlive-logpap-doc)
+#, fuzzy
+msgid "Documentation for texlive-logpap"
+msgstr "Dokumentace pro adaptx"
-#. summary(velocity)
-msgid "Java-based template engine"
-msgstr ""
+#. description(texlive-specs-n:texlive-logpap-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-logpap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(velocity:velocity-javadoc)
-msgid "Javadoc for velocity"
+#. summary(texlive-specs-n:texlive-logreq)
+msgid "Support for automation of the LaTeX workflow"
msgstr ""
-#. summary(werken-xpath:werken-xpath-javadoc)
-msgid "Javadoc for werken-xpath"
+#. description(texlive-specs-n:texlive-logreq)
+msgid ""
+"The package helps to automate a typical LaTeX workflow that involves running LaTeX several times, running tools such as BibTeX or makeindex, and so on. It will log requests like \"please rerun LaTeX\" or \"please run BibTeX on file X\" to an external XML file which lists all open tasks in a machine- readable format. Compiler scripts and integrated LaTeX editing environments may parse this file to determine the next steps in the workflow in a way that is more efficient than parsing the main log file. In sum, the package will do two things: enable package authors to use LaTeX commands to issue requests, collect all requests from all packages and write them to an external XML file at the end of the document.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(wsdl4j:wsdl4j-javadoc)
-msgid "Javadoc for wsdl4j"
-msgstr "Javadoc pro wsdl4j"
+#. summary(texlive-specs-n:texlive-logreq-doc)
+#, fuzzy
+msgid "Documentation for texlive-logreq"
+msgstr "Dokumentace pro adaptx"
-#. summary(xmlgraphics-commons:xmlgraphics-commons-javadoc)
-msgid "Javadoc for xmlgraphics-commons"
-msgstr ""
+#. description(texlive-specs-n:texlive-logreq-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-logreq"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xmlunit:xmlunit-javadoc)
-msgid "Javadoc for xmlunit"
+#. summary(texlive-specs-n:texlive-lollipop)
+msgid "TeX made easy"
msgstr ""
-#. description(xmlunit:xmlunit-javadoc)
-msgid "Javadoc for xmlunit. Also contains userguide."
+#. description(texlive-specs-n:texlive-lollipop)
+msgid ""
+"Lollipop is \"TeX made easy\" -- it is a macro package that functions as a toolbox for writing TeX macros. Its main aim is to make macro writing so easy that implementing a fully new layout in TeX would become a matter of less than an hour for an average document. The aim is that such a task could be accomplished by someone with only a very basic training in TeX programming. Thus, Lollipop aims to make structured text formatting available in environments where typical users would switch to WYSIWYG packages for the freedom that such a mechanism offers. In addition, development of support for Lollipop documents written in RTL languages (such as Persian) is underway.\n"
+"\n"
+"date: 2014-04-19 10:16:09 +0000"
msgstr ""
-#. summary(tomcat:tomcat-javadoc)
-msgid "Javadoc generated documentation for Apache Tomcat"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lollipop-doc)
+#, fuzzy
+msgid "Documentation for texlive-lollipop"
+msgstr "Dokumentace pro adaptx"
-#. description(tomcat:tomcat-javadoc)
-msgid "Javadoc generated documentation for Apache Tomcat."
-msgstr ""
+#. description(texlive-specs-n:texlive-lollipop-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lollipop"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(tuladha-jejeg-fonts)
-msgid "Javanese Font"
+#. summary(texlive-specs-n:texlive-longnamefilelist)
+msgid "Tidy \\listfiles with long file names"
msgstr ""
-#. summary(texlive-srcltx)
-msgid "Jump between DVI and TeX files"
-msgstr ""
-
-#. description(texlive-junicode)
+#. description(texlive-specs-n:texlive-longnamefilelist)
msgid ""
-"Junicode is a TrueType font with many OpenType features for antiquarians (especially medievalists) based on typefaces used by the Oxford Press in the late 17th and early 18th centuries. It works well with Xe(La)TeX.\n"
+"The package equips LaTeX's \\listfiles command with an optional argument for the number of characters in the longest base filename. This way you get a neatly aligned file list even when it contains files whose base names have more than 8 characters. The package can be combined with the myfilist package as explained in the documentation.\n"
"\n"
-"date: 2012-11-17 15:00:23 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ted)
+#. summary(texlive-specs-n:texlive-longnamefilelist-doc)
+#, fuzzy
+msgid "Documentation for texlive-longnamefilelist"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-longnamefilelist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-longnamefilelist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-loops)
+#, fuzzy
+#| msgid "KDE utility programs for laptop users"
+msgid "General looping macros for use with LaTeX"
+msgstr "Pomocné programu pro laptopy v KDE"
+
+#. description(texlive-specs-n:texlive-loops)
msgid ""
-"Just like sed is a stream editor, ted is a token list editor. Actually, it is not as powerful as sed, but its main feature is that it really works with tokens, not only characters. The ted package provides two user macros: \\Substitute and \\ShowTokens. The first is maybe the most useful: it performs substitutions in token lists (even inside braces). The second displays each token of the list (one per line) with its catcode (in the list, not just the current one), and can be useful for debugging or for TeX learners. Ted is designed to work well even if strange tokens (that is, unusual {charcode, catcode} pairs or tokens with a confusing meaning) occur in the list.\n"
+"The package provides efficient looping macros for processing both csv (separated-values) and nsv/tsv (non-separated values) lists. CSV lists which have associated parsers may be processed with the tools of the package.\n"
"\n"
-"date: 2008-08-24 08:50:19 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mversion)
-msgid "Keeping track of document versions"
-msgstr ""
+#. summary(texlive-specs-n:texlive-loops-doc)
+#, fuzzy
+msgid "Documentation for texlive-loops"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-kerkis)
-msgid "Kerkis (Greek) font family"
-msgstr ""
+#. description(texlive-specs-n:texlive-loops-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-loops"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-skeyval)
-msgid "Key-value parsing combining features of xkeyval and pgfkeys"
+#. summary(texlive-specs-n:texlive-lpic)
+msgid "Put LaTeX material over included graphics"
msgstr ""
-#. summary(vtkdata)
-msgid "Kitware VTK Library Data"
-msgstr ""
-
-#. description(texlive-tabfigures)
+#. description(texlive-specs-n:texlive-lpic)
msgid ""
-"Knuth designed his original fonts with tabular figures (figures whose width is uniform); this makes some layout problems rather simple. In more recent times, fonts (such as Minion Pro), which offer proportionally spaced figures, are increasingly being used. The package provides mechanisms whereby such proportional figures may still be aligned in tabular style (for example, in the table of contents).\n"
+"The package defines a convenient interface to put any LaTeX material on top of included graphics. The LaTeX material may also be rotated and typeset on top of a white box overshadowing the graphics. The coordinates of the LaTeX boxes are given relative to the original, unscaled graphics; when the graphics is rescaled, the LaTeX annotations stay at their right places (unless you do something extreme). In a draft mode, the package enables you to draw a coordinate grid over the picture for easy adjustment of positions of the annotations.\n"
"\n"
-"date: 2012-01-25 22:45:22 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-knuth)
-msgid "Knuth's published errata"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lpic-doc)
+#, fuzzy
+msgid "Documentation for texlive-lpic"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-koma-script-sfs)
-msgid "Koma-script letter class option for Finnish"
-msgstr ""
+#. description(texlive-specs-n:texlive-lpic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lpic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lshort-korean)
-msgid "Korean introduction to LaTeX"
+#. summary(texlive-specs-n:texlive-lplfitch)
+msgid "Fitch-style natural deduction proofs"
msgstr ""
-#. description(texlive-kpathsea)
+#. description(texlive-specs-n:texlive-lplfitch)
msgid ""
-"Kpathsea is a library and utility programs which provide path searching facilities for TeX file types, including the self- locating feature required for movable installations, layered on top of a general search mechanism. It is not distributed separately, but rather is released and maintained as part of the TeX live sources.\n"
+"The package provides macros for typesetting natural deduction proofs in \"Fitch\" style, with subproofs indented and offset by scope lines. The proofs from use of the package are in the format used in the textbook Language, Proof, and Logic by Dave Barker-Plummer, Jon Barwise, and John Etchemendy.\n"
"\n"
-"date: 2012-03-14 11:38:42 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-kurier)
+#. summary(texlive-specs-n:texlive-lplfitch-doc)
+#, fuzzy
+msgid "Documentation for texlive-lplfitch"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-lplfitch-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lplfitch"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-lps)
+msgid "Class for \"Logic and Philosophy of Science\""
+msgstr ""
+
+#. description(texlive-specs-n:texlive-lps)
msgid ""
-"Kurier is a two-element sans-serif typeface. It was designed for a diploma in typeface design at the Warsaw Academy of Fine Arts under the supervision of Roman Tomaszewski. This distribution contains a significantly extended set of characters covering the following modern alphabets: latin (including Vietnamese), Cyrillic and Greek as well as a number of additional symbols (including mathematical symbols). The fonts are prepared in Type 1 and OpenType formats. For use with TeX the following encoding files have been prepared: T1 (ec), T2 (abc), and OT2--Cyrillic, T5 (Vietnamese), OT4, QX, texansi and--nonstandard (IL2 for the Czech fonts), as well as supporting macros and files defining fonts for LaTeX.\n"
+"The 'Logic and Philosophy of Science' journal is an online publication of the University of Trieste (Italy). The class builds on the standard article class to offer a format that LaTeX authors may use when submitting to the journal.\n"
"\n"
-"date: 2010-08-03 18:49:06 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lkproof)
-msgid "LK Proof figure macros"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lps-doc)
+#, fuzzy
+msgid "Documentation for texlive-lps"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ijmart)
-msgid "LaTeX Class for the Israel Journal of Mathematics"
-msgstr ""
+#. description(texlive-specs-n:texlive-lps-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lps"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ocherokee)
-msgid "LaTeX Support for the Cherokee language"
+#. summary(texlive-specs-n:texlive-lsc)
+msgid "Typesetting Live Sequence Charts"
msgstr ""
-#. summary(texlive-oinuit)
-msgid "LaTeX Support for the Inuktitut Language"
+#. description(texlive-specs-n:texlive-lsc)
+msgid ""
+"This package is similar to the msc package in that it provides macros for typesetting a variant of sequence diagrams, in this case the Live Sequence Charts of Damm and Harel. The package supports the full LSC language of the original LSC paper, the Klose-extensions for formal verification and some of the Harel- extensions for the Play-In/Play-Out approach (cf. the manual).\n"
+"\n"
+"date: 2012-07-16 16:45:50 +0000"
msgstr ""
-#. summary(texlive-latex-tabellen)
-msgid "LaTeX Tabellen"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lsc-doc)
+#, fuzzy
+msgid "Documentation for texlive-lsc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mslapa)
+#. description(texlive-specs-n:texlive-lsc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lsc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-lshort-bulgarian)
+#, fuzzy
+msgid "Bulgarian translation of the \"Short Introduction to LaTeX2e\""
+msgstr "Bulharské překlady pro KOffice"
+
+#. description(texlive-specs-n:texlive-lshort-bulgarian)
+#, fuzzy
msgid ""
-"LaTeX and BibTeX style files for a respectably close approximation to APA (American Psychological Association) citation and reference style.\n"
+"The source files, PostScript and PDF files of the Bulgarian translation of the \"Short Introduction to LaTeX 2e\".\n"
"\n"
-"date: 2010-03-20 18:23:31 +0000"
+"date: 2012-07-16 15:38:59 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lshort-chinese)
+msgid "Introduction to LaTeX, in Chinese"
msgstr ""
-#. description(texlive-morefloats)
+#. description(texlive-specs-n:texlive-lshort-chinese)
msgid ""
-"LaTeX can, by default, only cope with 18 outstanding floats; any more, and you get the error \"too many unprocessed floats\". This package releases the limit; TeX itself imposes limits (which are independent of the help offered by e-TeX). However, if your floats can't be placed anywhere, extending the number of floats merely delays the arrival of the inevitable error message.\n"
+"A translation to Chinese of the not so short introduction to LaTeX2e, presented by the Chinese TeX Society CTeX. The processed output is created by use of XeTeX.\n"
"\n"
-"date: 2012-01-29 15:01:54 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lacheck)
-msgid "LaTeX checker"
+#. summary(texlive-specs-n:texlive-lshort-czech)
+msgid "Czech translation of the \"Short Introduction to LaTeX2e\""
msgstr ""
-#. summary(texlive-nostarch)
-msgid "LaTeX class for No Starch Press"
-msgstr ""
-
-#. summary(texlive-prosper)
+#. description(texlive-specs-n:texlive-lshort-czech)
#, fuzzy
-msgid "LaTeX class for high quality slides"
-msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
+msgid ""
+"This is the Czech translation of \"A Short Introduction to LaTeX2e\".\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-pseudocode)
-msgid "LaTeX environment for specifying algorithms in a natural way"
+#. summary(texlive-specs-n:texlive-lshort-dutch)
+msgid "Introduction to LaTeX in Dutch"
msgstr ""
-#. summary(texlive-latex-bin)
-msgid "LaTeX executables and man pages"
-msgstr ""
+#. description(texlive-specs-n:texlive-lshort-dutch)
+#, fuzzy
+msgid ""
+"This is the Dutch (Nederlands) translation of the Short Introduction to LaTeX2e.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-russ)
-msgid "LaTeX in Russian, without babel"
+#. summary(texlive-specs-n:texlive-lshort-english)
+msgid "A (Not So) Short Introduction to LaTeX2e"
msgstr ""
-#. description(texlive-latex)
+#. description(texlive-specs-n:texlive-lshort-english)
msgid ""
-"LaTeX is a widely-used macro package for TeX, providing many basic document formating commands extended by a wide range of packages. It is a development of Leslie Lamport's original LaTeX 2.09, and superseded the older system in June 1994. The basic distribution is catalogued separately, at latex-base; apart from a large set of contributed packages and third-party documentation (elsewhere on the archive), the distribution includes: - a bunch of required packages, which LaTeX authors are \"entitled to assume\" will be present on any system running LaTeX; and - a minimal set of documentation detailing differences from the 'old' version of LaTeX in the areas of user commands, font selection and control, class and package writing, font encodings, configuration options and modification of LaTeX. For downloading details, see the linked catalogue entries above.\n"
+"The document derives from a German introduction ('lkurz'), which was translated and updated; it continues to be updated. This translation has, in its turn, been translated into several other languages; see the lshort catalogue entry for the current list.\n"
"\n"
-"date: 2012-07-07 14:18:52 +0000"
+"date: 2014-04-21 22:43:27 +0000"
msgstr ""
-#. summary(texlive-tugboat)
-msgid "LaTeX macros for TUGboat articles"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lshort-finnish)
+#, fuzzy
+#| msgid "Finnish Dictionary Package"
+msgid "Finnish introduction to LaTeX"
+msgstr "Finský slovníkový balík"
-#. summary(texlive-qobitree)
+#. description(texlive-specs-n:texlive-lshort-finnish)
#, fuzzy
-msgid "LaTeX macros for typesetting trees"
-msgstr "TeXová makra pro šachové diagramy"
+msgid ""
+"This is the Finnish translation of Short Introduction to LaTeX2e, with added coverage of Finnish typesetting rules.\n"
+"\n"
+"date: 2012-07-16 15:38:59 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-lgreek)
-msgid "LaTeX macros for using Silvio Levy's Greek fonts"
+#. summary(texlive-specs-n:texlive-lshort-french)
+msgid "Short introduction to LaTeX, French translation"
msgstr ""
-#. description(texlive-pgf-umlsd)
+#. description(texlive-specs-n:texlive-lshort-french)
+#, fuzzy
msgid ""
-"LaTeX macros to draw UML diagrams using pgf\n"
+"French version of A Short Introduction to LaTeX2e.\n"
"\n"
-"date: 2011-02-03 12:02:40 +0000"
+"date: 2012-07-16 15:38:59 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lshort-german)
+msgid "German version of A Short Introduction to LaTeX2e: LaTeX2e-Kurzbeschreibung"
msgstr ""
-#. description(texlive-mflogo)
+#. description(texlive-specs-n:texlive-lshort-german)
msgid ""
-"LaTeX package and font definition file to access the Knuthian mflogo fonts described in 'The MetaFontbook' and to typeset MetaFont logos in LaTeX documents.\n"
+"The lshort-german package\n"
"\n"
-"date: 2010-03-14 22:46:18 +0000"
+"date: 2012-11-15 12:07:37 +0000"
msgstr ""
-#. summary(texlive-pgfopts)
-msgid "LaTeX package options with pgfkeys"
+#. summary(texlive-specs-n:texlive-lshort-italian)
+msgid "Introduction to LaTeX in Italian"
msgstr ""
-#. description(texlive-relenc)
+#. description(texlive-specs-n:texlive-lshort-italian)
+#, fuzzy
msgid ""
-"LaTeX package providing a relaxed font encoding to make available to a font designer more slots for insertion of ligatures and accented characters.\n"
+"This is the Italian translation of the Short Introduction to LaTeX2e.\n"
"\n"
-"date: 2011-04-06 06:31:30 +0000"
-msgstr ""
+"date: 2012-07-16 15:38:59 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-l2picfaq)
-msgid "LaTeX pictures \"how-to\" (German)"
+#. summary(texlive-specs-n:texlive-lshort-japanese)
+msgid "Japanese version of A Short Introduction to LaTeX2e"
msgstr ""
-#. summary(texlive-sgame)
-msgid "LaTeX style for typesetting strategic games"
+#. description(texlive-specs-n:texlive-lshort-japanese)
+msgid ""
+"The lshort-japanese package\n"
+"\n"
+"date: 2012-07-16 15:38:59 +0000"
msgstr ""
-#. summary(texlive-wasysym)
-msgid "LaTeX support file to use the WASY2 fonts"
+#. summary(texlive-specs-n:texlive-lshort-korean)
+msgid "Korean introduction to LaTeX"
msgstr ""
-#. summary(texlive-mflogo)
-msgid "LaTeX support for MetaFont logo fonts"
+#. description(texlive-specs-n:texlive-lshort-korean)
+msgid ""
+"A translation of Oetiker's original (not so) short introduction.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-quattrocento)
-msgid "LaTeX support for Quattrocento and Quattrocento Sans fonts"
+#. summary(texlive-specs-n:texlive-lshort-mongol)
+msgid "Short introduction to LaTeX, in Mongolian"
msgstr ""
-#. summary(texlive-paratype)
-msgid "LaTeX support for free fonts by ParaType"
+#. description(texlive-specs-n:texlive-lshort-mongol)
+#, fuzzy
+msgid ""
+"A translation of Oetiker's Not so short introduction.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lshort-persian)
+msgid "Persian (Farsi) introduction to LaTeX"
msgstr ""
-#. summary(texlive-ocr-latex)
+#. description(texlive-specs-n:texlive-lshort-persian)
#, fuzzy
-msgid "LaTeX support for ocr fonts"
-msgstr "XML podpora pro castor"
+msgid ""
+"A Persian (Farsi) translation of Oetiker's (not so) short introduction.\n"
+"\n"
+"date: 2013-07-28 12:28:30 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-punk-latex)
-msgid "LaTeX support for punk fonts"
+#. summary(texlive-specs-n:texlive-lshort-polish)
+msgid "Introduction to LaTeX in Polish"
msgstr ""
-#. summary(texlive-librebaskerville)
+#. description(texlive-specs-n:texlive-lshort-polish)
#, fuzzy
-msgid "LaTeX support for the Libre Baskerville family of fonts"
-msgstr "XML podpora pro castor"
+msgid ""
+"This is the Polish translation of A Short Introduction to LaTeX2e.\n"
+"\n"
+"date: 2012-08-25 12:43:44 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-manfnt)
-msgid "LaTeX support for the TeX book symbols"
+#. summary(texlive-specs-n:texlive-lshort-portuguese)
+msgid "Introduction to LaTeX in Portuguese"
msgstr ""
-#. description(texlive-wnri-latex)
+#. description(texlive-specs-n:texlive-lshort-portuguese)
+#, fuzzy
msgid ""
-"LaTeX support for the fonts.\n"
+"This is the Portuguese translation of A Short Introduction to LaTeX2e.\n"
"\n"
-"date: 2011-05-05 22:56:07 +0000"
-msgstr ""
+"date: 2012-08-25 08:03:02 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-tengwarscript)
-msgid "LaTeX support for using Tengwar fonts"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lshort-russian)
+#, fuzzy
+#| msgid "Russian Dictionary for MySpell"
+msgid "Russian introduction to LaTeX"
+msgstr "Ruský slovník pro MySpell"
-#. summary(texlive-wnri-latex)
+#. description(texlive-specs-n:texlive-lshort-russian)
#, fuzzy
-msgid "LaTeX support for wnri fonts"
-msgstr "XML podpora pro castor"
+msgid ""
+"Russian version of A Short Introduction to LaTeX2e.\n"
+"\n"
+"date: 2012-08-25 08:03:02 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-pfarrei)
-msgid "LaTeX support of pastors' and priests' work"
+#. summary(texlive-specs-n:texlive-lshort-slovak)
+msgid "Slovak introduction to LaTeX"
msgstr ""
-#. summary(texlive-pkuthss)
-msgid "LaTeX template for dissertations in Peking University"
-msgstr ""
+#. description(texlive-specs-n:texlive-lshort-slovak)
+#, fuzzy
+msgid ""
+"A Slovak translation of Oetiker's (not so) short introduction.\n"
+"\n"
+"date: 2012-08-25 08:03:02 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-seuthesis)
-msgid "LaTeX template for theses at Southeastern University"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lshort-slovenian)
+#, fuzzy
+#| msgid "Slovenian Translations for KDE"
+msgid "Slovenian translation of lshort"
+msgstr "Slovinské překlady pro KDE"
-#. description(texlive-spverbatim)
+#. description(texlive-specs-n:texlive-lshort-slovenian)
+#, fuzzy
msgid ""
-"LaTeX's \\verb macro treats its argument as an unbreakable unit of text. This can lead to poor typesetting, especially when the argument is long. The spverbatim package provides an \\spverb macro that is analogous to \\verb and an spverbatim environment that is analogous to verbatim with the difference being that \\spverb and spverbatim allow LaTeX to break lines at space characters.\n"
+"A Slovenian translation of the Not So Short Introduction to LaTeX 2e.\n"
"\n"
-"date: 2009-11-09 23:30:52 +0000"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lshort-spanish)
+msgid "Short introduction to LaTeX, Spanish translation"
msgstr ""
-#. description(texlive-tamefloats)
+#. description(texlive-specs-n:texlive-lshort-spanish)
+#, fuzzy
msgid ""
-"LaTeX's figures, tables, and \\marginpars are dangerous for footnotes (and probably also \\enlargethispage). Here is a proposal (a 'patch' package) to help, by using \\holdinginserts in a simple way. It replaces the original problem with a new one -- it is an experiment to find out whether the new problem is less bad (or it is just a contribution to the discussion, maybe just a summary of previous work). The files provide further information.\n"
+"A Spanish translation of the Short Introduction to LaTeX2e, version 20.\n"
"\n"
-"date: 2012-06-21 12:54:52 +0000"
+"date: 2012-03-13 17:56:34 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lshort-thai)
+msgid "Introduction to LaTeX in Thai"
msgstr ""
-#. description(texlive-nopageno)
+#. description(texlive-specs-n:texlive-lshort-thai)
+#, fuzzy
msgid ""
-"LaTeX's standard styles use two page styles, one on normal pages and one on 'opening' pages with \\maketitle or \\chapter, etc. Unfortunately there is only easy access to changing one of these two so if you want something other than 'plain' on the opening pages you must use \\thispagestyle on each such page. The fancyhdr package does provide a more flexible interface, but if you just want an empty page style on all pages then this package will do the job.\n"
+"This is the Thai translation of the Short Introduction to LaTeX2e.\n"
"\n"
-"date: 2010-05-11 10:36:30 +0000"
-msgstr ""
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-type1cm)
+#. summary(texlive-specs-n:texlive-lshort-turkish)
+#, fuzzy
+#| msgid "An Turkish dictionary for aspell"
+msgid "Turkish introduction to LaTeX"
+msgstr "Turecký slovník pro aspell"
+
+#. description(texlive-specs-n:texlive-lshort-turkish)
+#, fuzzy
msgid ""
-"LaTeX, by default, restricts the sizes at which you can use its default computer modern fonts, to a fixed set of discrete sizes (effectively, a set specified by Knuth). The type1cm package removes this restriction; this is particularly useful when using scalable versions of the cm fonts (Bakoma, or the versions from BSR/Y&Y, or True Type versions from Kinch, PCTeX, etc.). In fact, since modern distributions will automatically generate any bitmap font you might need, type1cm has wider application than just those using scaleable versions of the fonts. Note that the LaTeX distribution now contains a package fix-cm, which performs the task of type1cm, as well as doing the same job for T1- and TS1-encoded ec fonts.\n"
+"A Turkish translation of Oetiker's (not so) short introduction.\n"
"\n"
-"date: 2011-03-24 09:40:42 +0000"
-msgstr ""
+"date: 2012-08-17 11:10:56 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. summary(texlive-l3kernel)
-msgid "LaTeX3 programming conventions"
+#. summary(texlive-specs-n:texlive-lshort-ukr)
+msgid "Ukrainian version of the LaTeX introduction"
msgstr ""
-#. summary(texlive-termlist)
-msgid "Label any kind of term with a continuous counter"
+#. description(texlive-specs-n:texlive-lshort-ukr)
+#, fuzzy
+msgid ""
+"Ukrainian version of A Short Introduction to LaTeX2e.\n"
+"\n"
+"date: 2012-01-22 14:56:38 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lshort-vietnamese)
+msgid "Vietnamese version of the LaTeX introduction"
msgstr ""
-#. summary(texlive-syntrace)
-msgid "Labels for tracing in a syntax tree"
+#. description(texlive-specs-n:texlive-lshort-vietnamese)
+#, fuzzy
+msgid ""
+"Vietnamese version of A Short Introduction to LaTeX2e.\n"
+"\n"
+"date: 2012-07-24 14:30:52 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-n:texlive-lstaddons)
+msgid "Add-on packages for listings: autogobble and line background"
msgstr ""
-#. description(texlive-lacheck)
+#. description(texlive-specs-n:texlive-lstaddons)
msgid ""
-"Lacheck is a tool for finding common mistakes in LaTeX documents. The distribution includes sources, and executables for OS/2 and Win32 environments.\n"
+"The bundle contains a small collection of add-on packages for the listings package. Current packages are: lstlinebgrd: colour the background of some or all lines of a listing; and lstautogobble: set the standard \"gobble\" option to the indent of the first line of the code.\n"
"\n"
-"date: 2012-06-23 22:35:21 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(thunar-plugin-shares:thunar-plugin-shares-lang)
-msgid "Languages for package thunar-plugin-shares"
-msgstr "Jazykový balíček pro thunar-plugin-shares"
+#. summary(texlive-specs-n:texlive-lstaddons-doc)
+#, fuzzy
+msgid "Documentation for texlive-lstaddons"
+msgstr "Dokumentace pro adaptx"
-#. summary(thunar-plugin-vcs:thunar-plugin-vcs-lang)
-msgid "Languages for package thunar-plugin-vcs"
-msgstr "Jazykový balíček pro thunar-plugin-vcs"
+#. description(texlive-specs-n:texlive-lstaddons-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lstaddons"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(tilda:tilda-lang)
-msgid "Languages for package tilda"
-msgstr "Jazykový balíček pro tilda"
+#. summary(texlive-specs-n:texlive-lt3graph)
+msgid "Provide a graph datastructure for experimental LaTeX3"
+msgstr ""
-#. summary(tomboy:tomboy-lang)
-msgid "Languages for package tomboy"
-msgstr "Jazykový balíček pro tomboy"
+#. description(texlive-specs-n:texlive-lt3graph)
+msgid ""
+"The package defines a 'graph' data structure, for use in documents that are using the experimental LaTeX 3 syntax.\n"
+"\n"
+"date: 2014-04-21 23:06:17 +0000"
+msgstr ""
-#. summary(tomoe-gtk:tomoe-gtk-lang)
-msgid "Languages for package tomoe-gtk"
-msgstr "Jazykový balíček pro tomoe-gtk"
+#. summary(texlive-specs-n:texlive-lt3graph-doc)
+#, fuzzy
+msgid "Documentation for texlive-lt3graph"
+msgstr "Dokumentace pro gawk"
-#. summary(totem:totem-lang)
-msgid "Languages for package totem"
-msgstr "Jazykový balíček pro totem"
+#. description(texlive-specs-n:texlive-lt3graph-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lt3graph"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(totem-pl-parser:totem-pl-parser-lang)
-msgid "Languages for package totem-pl-parser"
-msgstr "Jazykový balíček pro totem-pl-parser"
+#. summary(texlive-specs-n:texlive-ltablex)
+#, fuzzy
+#| msgid "Languages for package epiphany-extensions"
+msgid "Table package extensions"
+msgstr "Jazykový balíček pro epiphany-extensions"
-#. summary(tracker:tracker-lang)
-msgid "Languages for package tracker"
-msgstr "Jazykový balíček pro tracker"
+#. description(texlive-specs-n:texlive-ltablex)
+msgid ""
+"Modifies the tabularx environment to combine the features of the tabularx package (auto-sized columns in a fixed width table) with those of the longtable package (multi-page tables).\n"
+"\n"
+"date: 2013-06-19 16:12:49 +0000"
+msgstr ""
-#. summary(trader:trader-lang)
-msgid "Languages for package trader"
-msgstr "Jazykový balíček pro trader"
+#. summary(texlive-specs-n:texlive-ltablex-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltablex"
+msgstr "Dokumentace pro adaptx"
-#. summary(transmageddon:transmageddon-lang)
-msgid "Languages for package transmageddon"
-msgstr "Jazykový balíček pro transmageddon"
+#. description(texlive-specs-n:texlive-ltablex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltablex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(transmission:transmission-gtk-lang)
-msgid "Languages for package transmission"
-msgstr "Jazykový balíček pro transmission"
-
-#. summary(tre:tre-lang)
-msgid "Languages for package tre"
+#. summary(texlive-specs-n:texlive-ltabptch)
+msgid "Bug fix for longtable"
msgstr ""
-#. summary(turpial:turpial-lang)
-msgid "Languages for package turpial"
-msgstr "Jazykový balíček pro turpial"
-
-#. summary(tuxpaint-config:tuxpaint-config-lang)
-msgid "Languages for package tuxpaint-config"
+#. description(texlive-specs-n:texlive-ltabptch)
+msgid ""
+"A patch for LaTeX bugs tools/3180 and tools/3480. The patch applies to version 4.11 of longtable.\n"
+"\n"
+"date: 2012-07-10 09:52:24 +0000"
msgstr ""
-#. summary(udisks2:udisks2-lang)
-msgid "Languages for package udisks2"
-msgstr "Jazykový balíček pro udisks2"
+#. summary(texlive-specs-n:texlive-ltabptch-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltabptch"
+msgstr "Dokumentace pro adaptx"
-#. summary(uget:uget-lang)
-msgid "Languages for package uget"
-msgstr "Jazykový balíček pro uget"
+#. description(texlive-specs-n:texlive-ltabptch-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltabptch"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(upower:upower-lang)
-msgid "Languages for package upower"
-msgstr "Jazykový balíček pro upower"
+#. summary(texlive-specs-n:texlive-ltxdockit)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation support"
+msgstr "Dokumentace pro adaptx"
-#. summary(util-linux:util-linux-lang)
-msgid "Languages for package util-linux"
-msgstr "Jazykový balíček pro util-linux"
+#. description(texlive-specs-n:texlive-ltxdockit)
+msgid ""
+"This bundle, consisting of a simple wrapper class and some packages, forms a small LaTeX/BibTeX documentation kit; the author uses it for some of his own packages. The package is not supported: users should not attempt its use unless they are capable of dealing with problems unaided. (The actual purpose of releasing the package is to make it possible for third parties to compile the documentation of other packages, should that be necessary.)\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(vacuum-im:vacuum-im-lang)
-msgid "Languages for package vacuum-im"
-msgstr "Jazykový balíček pro vacuum-im"
+#. summary(texlive-specs-n:texlive-ltxdockit-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltxdockit"
+msgstr "Dokumentace pro adaptx"
-#. summary(vino:vino-lang)
-msgid "Languages for package vino"
-msgstr "Jazykový balíček pro vino"
+#. description(texlive-specs-n:texlive-ltxdockit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltxdockit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(virtaal:virtaal-lang)
-msgid "Languages for package virtaal"
-msgstr "Jazykový balíček pro virtaal"
+#. summary(texlive-specs-n:texlive-ltxfileinfo)
+msgid "Print version information for a LaTeX file"
+msgstr ""
-#. summary(vlc:vlc-noX-lang)
-msgid "Languages for package vlc"
+#. description(texlive-specs-n:texlive-ltxfileinfo)
+msgid ""
+"ltxfileinfo displays version information for LaTeX files. If no path information is given, the file is searched using kpsewhich. As an extra, for developers, the script will (use the --star or --color options) check the valididity of the \\Provides... statements in the files. The script uses code from Uwe Luck's readprov.sty.\n"
+"\n"
+"date: 2014-04-27 08:32:28 +0000"
msgstr ""
-#. summary(vorbis-tools:vorbis-tools-lang)
-msgid "Languages for package vorbis-tools"
-msgstr "Jazykový balíček pro vorbis-tools"
+#. summary(texlive-specs-n:texlive-ltxfileinfo-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltxfileinfo"
+msgstr "Dokumentace pro adaptx"
-#. summary(vte:vte-lang)
-msgid "Languages for package vte"
-msgstr "Jazykový balíček pro vte"
+#. description(texlive-specs-n:texlive-ltxfileinfo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltxfileinfo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(wammu:wammu-lang)
-msgid "Languages for package wammu"
-msgstr "Jazykový balíček pro wammu"
+#. summary(texlive-specs-n:texlive-ltximg)
+msgid "Split LaTeX files to sanitise a conversion process"
+msgstr ""
-#. summary(weather-wallpaper:weather-wallpaper-lang)
-msgid "Languages for package weather-wallpaper"
-msgstr "Jazykový balíček pro weather-wallpaper"
+#. description(texlive-specs-n:texlive-ltximg)
+msgid ""
+"The package provides a Perl script that extracts all TikZ and PStricks environments for separate processing to produce images (in eps, pdf, png or jpg format) for use by a converter or the preview bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(weechat:weechat-lang)
-msgid "Languages for package weechat"
-msgstr "Jazykový balíček pro weechat"
+#. summary(texlive-specs-n:texlive-ltximg-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltximg"
+msgstr "Dokumentace pro adaptx"
-#. summary(x-tile:x-tile-lang)
-msgid "Languages for package x-tile"
-msgstr "Jazykový balíček pro x-tile"
+#. description(texlive-specs-n:texlive-ltximg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltximg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xchat:xchat-lang)
-msgid "Languages for package xchat"
-msgstr "Jazykový balíček pro xchat"
+#. summary(texlive-specs-n:texlive-ltxindex)
+msgid "A LaTeX package to typeset indices with GNU's Texindex"
+msgstr ""
-#. summary(xdg-user-dirs:xdg-user-dirs-lang)
-msgid "Languages for package xdg-user-dirs"
-msgstr "Jazykový balíček pro xdg-user-dirs"
-
-#. summary(xdg-user-dirs-gtk:xdg-user-dirs-gtk-lang)
-msgid "Languages for package xdg-user-dirs-gtk"
-msgstr "Jazykový balíček pro xdg-user-dirs-gtk"
-
-#. summary(xfburn:xfburn-lang)
-msgid "Languages for package xfburn"
-msgstr "Jazykový balíček pro xfburn"
-
-#. summary(xfce4-panel-plugin-whiskermenu:xfce4-panel-plugin-whiskermenu-lang)
-msgid "Languages for package xfce4-panel-plugin-whiskermenu"
+#. description(texlive-specs-n:texlive-ltxindex)
+msgid ""
+"A LaTeX package that allows the user to make indexes with GNU's Texindex program, instead of makeindex. It provides the indexing commands available in Texinfo by default, but only defines the concept index (cp) by default -- the user must define other standard indexes, and there is no provision for custom indexes. The package is not currently maintained.\n"
+"\n"
+"date: 2012-07-10 09:52:24 +0000"
msgstr ""
-#. summary(xfmpc:xfmpc-lang)
-msgid "Languages for package xfmpc"
-msgstr "Jazykový balíček pro xfmpc"
+#. summary(texlive-specs-n:texlive-ltxindex-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltxindex"
+msgstr "Dokumentace pro adaptx"
-#. summary(xkeyboard-config:xkeyboard-config-lang)
-msgid "Languages for package xkeyboard-config"
-msgstr "Jazykový balíček pro xkeyboard-config"
+#. description(texlive-specs-n:texlive-ltxindex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltxindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xz:xz-lang)
-msgid "Languages for package xz"
-msgstr "Jazykový balíček pro xz"
+#. summary(texlive-specs-n:texlive-ltxkeys)
+#, fuzzy
+#| msgid "A fast metadata parser for yum"
+msgid "A robust key parser for LaTeX"
+msgstr "Rychlý analyzátor metadat pro yum"
-#. summary(yelp:yelp-lang)
-msgid "Languages for package yelp"
-msgstr "Jazykový balíček pro yelp"
+#. description(texlive-specs-n:texlive-ltxkeys)
+msgid ""
+"The package provides facilities for creating and managing keys in the sense of the keyval and xkeyval packages, but it is intended to be more robust and faster. Its robustness comes from its ability to preserve braces in key values throughout parsing. The need to preserve braces in key values arises often in parsing keys (for example, in the xwatermark package). The package is faster than xkeyval package because (among other things) it avoids character-wise parsing of key values (called \"selective sanitization\" by the xkeyval package). The package also provides functions for defining and managing keys.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(yum:yum-lang)
-msgid "Languages for package yum"
-msgstr "Jazykový balíček pro yum"
+#. summary(texlive-specs-n:texlive-ltxkeys-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltxkeys"
+msgstr "Dokumentace pro adaptx"
-#. summary(zenity:zenity-lang)
-msgid "Languages for package zenity"
-msgstr "Jazykový balíček pro zenity"
+#. description(texlive-specs-n:texlive-ltxkeys-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltxkeys"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-interactiveworkbook)
-msgid "Latex-based interactive PDF on the web"
+#. summary(texlive-specs-n:texlive-ltxmisc)
+msgid "Miscellaneous LaTeX packages, etcetera"
msgstr ""
-#. description(texlive-latexdiff)
+#. description(texlive-specs-n:texlive-ltxmisc)
msgid ""
-"Latexdiff is a Perl script for visual mark up and revision of significant differences between two latex files. Various options are available for visual markup using standard latex packages such as color. Changes not directly affecting visible text, for example in formatting commands, are still marked in the latex source. A rudimentary revision facilility is provided by another Perl script, latexrevise, which accepts or rejects all changes. Manual editing of the difference file can be used to override this default behaviour and accept or reject selected changes only.\n"
+"The ltxmisc package\n"
"\n"
-"date: 2012-12-18 11:31:15 +0000"
+"date: 2012-07-10 11:36:48 +0000"
msgstr ""
-#. description(texlive-latexmk)
-msgid ""
-"Latexmk completely automates the process of generating a LaTeX document. Given the source files for a document, latexmk issues the appropriate sequence of commands to generate a .dvi, .ps, .pdf or hardcopy version of the document. An important feature is the \"preview continuous mode\", where the script watches all of the source files (primary file and included TeX and graphics files), and reruns LaTeX, etc., whenever a source file has changed. Thus a previewer can have an updated display whenever the source files change.\n"
-"\n"
-"date: 2012-11-17 00:32:51 +0000"
+#. summary(texlive-specs-n:texlive-ltxnew)
+msgid "A simple means of creating commands"
msgstr ""
-#. description(texlive-latexpand)
+#. description(texlive-specs-n:texlive-ltxnew)
msgid ""
-"Latexpand is a Perl script that simply replaces \\input and \\include commands with the content of the file input/included. The script does not deal with \\includeonly commands.\n"
+"The package ltxnew provides \\new, \\renew and \\provide prefixes for checking definitions. It is designed to work with e-TeX distributions of LaTeX and relies on the LaTeX internal macro \\@ifdefinable. Local allocation of counters, dimensions, skips, muskips, boxes, tokens and marks are provided by the etex package. \\new and \\renew as well as \\provide may be used for all kind of control sequences. Please refer to the section \"Using \\new\" of the PDF documentation.\n"
"\n"
-"date: 2012-11-28 12:57:31 +0000"
+"date: 2012-07-10 11:36:48 +0000"
msgstr ""
-#. description(texlive-lm-math)
+#. summary(texlive-specs-n:texlive-ltxnew-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltxnew"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-ltxnew-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltxnew"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-ltxtools)
+#, fuzzy
+#| msgid "A Collection of Free Arabic Fonts"
+msgid "A collection of LaTeX API macros"
+msgstr "Sbírka volně dostupných arabských písem"
+
+#. description(texlive-specs-n:texlive-ltxtools)
msgid ""
-"Latin Modern Math is a maths companion for the Latin Modern family of fonts, in OpenType format. For use with LuaLaTeX or XeLaTeX, support is available from the unicode-math package.\n"
+"This is a bundle of macros that the author uses in the coding of others of his macro files.\n"
"\n"
-"date: 2013-02-06 17:13:15 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lm)
-msgid "Latin modern fonts in outline formats"
-msgstr ""
+#. summary(texlive-specs-n:texlive-ltxtools-doc)
+#, fuzzy
+msgid "Documentation for texlive-ltxtools"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lato)
-msgid "Lato font fanily and LaTeX support"
+#. description(texlive-specs-n:texlive-ltxtools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ltxtools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-lua-alt-getopt)
+msgid "Process application arguments the same way as getopt_long"
msgstr ""
-#. description(texlive-lato)
+#. description(texlive-specs-n:texlive-lua-alt-getopt)
msgid ""
-"Lato is a sanserif typeface family designed in the Summer 2010 by Warsaw-based designer Lukasz Dziedzic for the tyPoland foundry. This font, which includes five weights (hairline, light, regular, bold and black), is available from the Google Font Directory as TrueType files under the Open Font License version 1.1. The package provides support for this font in LaTeX. It includes the original TrueType fonts, as well as Type 1 versions, converted for this package using FontForge for full support with Dvips.\n"
+"lua_altgetopt is a MIT-licensed module for Lua, for processing application arguments in the same way as BSD/GNU getopt_long(3) functions do. This module is made available for lua script writers to have consistent command line parsing routines.\n"
"\n"
-"date: 2011-12-31 12:07:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-parskip)
-msgid "Layout with zero \\parindent, non-zero \\parskip"
+#. summary(texlive-specs-n:texlive-lua-alt-getopt-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-lua-alt-getopt"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-lua-alt-getopt-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lua-alt-getopt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-lua-check-hyphen)
+msgid "Mark hyphenations in a document, for checking"
msgstr ""
-#. description(texlive-leftidx)
+#. description(texlive-specs-n:texlive-lua-check-hyphen)
msgid ""
-"Left and right subscripts and superscripts are automatically raised for better fitting to the symbol they belong to.\n"
+"The package looks at all hyphenation breaks in the document, comparing them against a white-list prepared by the author. If a hyphenation break is found, for which there is no entry in the white-list, the package flags the line where the break starts. The author may then either add the hyphenation to the white-list, or adjust the document to avoid the break.\n"
"\n"
-"date: 2007-01-08 21:21:56 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-leftidx)
-msgid "Left and right subscripts and superscripts in math mode"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lua-check-hyphen-doc)
+#, fuzzy
+msgid "Documentation for texlive-lua-check-hyphen"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-lens)
-msgid "Lenses with PSTricks"
-msgstr ""
+#. description(texlive-specs-n:texlive-lua-check-hyphen-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lua-check-hyphen"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lettre)
-msgid "Letters and faxes in French"
+#. summary(texlive-specs-n:texlive-lua-visual-debug)
+msgid "Visual debugging with LuaLaTeX"
msgstr ""
-#. summary(tomcat:tomcat-lib)
-msgid "Libraries needed to run the Tomcat Web container"
-msgstr ""
-
-#. description(texlive-librebaskerville)
+#. description(texlive-specs-n:texlive-lua-visual-debug)
msgid ""
-"Libre Baskerville is designed by Pablo Impallari. It is primarily intended to be a web font but is also attractive as a TeX font. As there is currently no bold italic variant, an artificially slanted version of the bold variant has been generated.\n"
+"The package uses lua code to provide visible indications of boxes, glues, kerns and penalties in the PDF output. The package is known to work in LaTeX and Plain TeX documents.\n"
"\n"
-"date: 2013-01-28 06:51:38 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-libris)
-msgid "Libris ADF fonts, with LaTeX support"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lua-visual-debug-doc)
+#, fuzzy
+msgid "Documentation for texlive-lua-visual-debug"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-libris)
+#. description(texlive-specs-n:texlive-lua-visual-debug-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lua-visual-debug"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-lua2dox)
+#, fuzzy
+msgid "Auto-documentation of lua code"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-lua2dox)
msgid ""
-"LibrisADF is a sans-serif family designed to mimic Lydian. The bundle includes: - fonts, in Adobe Type 1, TrueType and OpenType formats, and - LaTeX support macros, for use with the Type 1 versions of the fonts. The LaTeX macros depend on the nfssext-cfr bundle. GPL licensing applies the the fonts themselves; the support macros are distributed under LPPL licensing.\n"
+"The package extends the well-known C-like language autodoc tool, doxygen, to read and document lua code. In use, you edit and test your code and periodically run the autodoc tool to update the documentation, which may be viewed via an html browser. Autodoc tools can read the code well enough to find function/... declarations and document them. If the code also contains appropriatly formatted \"magic comments\", the tool can use them to supplement the documentation. The package is a first prototype of a planned TeX2DoX tool (in development), which will process joint (La)TeX/lua documents.\n"
"\n"
-"date: 2010-07-10 17:16:06 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(turpial)
-msgid "Lightweight, functional and integrated Twitter client"
-msgstr ""
+#. summary(texlive-specs-n:texlive-lua2dox-doc)
+#, fuzzy
+msgid "Documentation for texlive-lua2dox"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lineno)
-msgid "Line numbers on paragraphs"
-msgstr ""
-
-#. summary(texlive-linearA)
+#. description(texlive-specs-n:texlive-lua2dox-doc)
#, fuzzy
-#| msgid "Additional scripts for ant"
-msgid "Linear A script fonts"
-msgstr "Další skripty pro ant"
+msgid "This package includes the documentation for texlive-lua2dox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rrgtrees)
-msgid "Linguistic tree diagrams for Role and Reference Grammar (RRG) with LaTeX"
+#. summary(texlive-specs-n:texlive-luabibentry)
+msgid "Repeat BibTeX entries in a LuaLaTeX document body"
msgstr ""
-#. summary(texlive-tkz-linknodes)
-msgid "Link nodes in mathematical environments"
+#. description(texlive-specs-n:texlive-luabibentry)
+msgid ""
+"The package reimplements bibentry, for use in LuaLaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-outline)
+#. summary(texlive-specs-n:texlive-luabibentry-doc)
#, fuzzy
-#| msgid "Chroot environment for BIND named and lwresd"
-msgid "List environment for making outlines"
-msgstr "Prostředí chroot pro BIND named a lwresd"
+msgid "Documentation for texlive-luabibentry"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-snapshot)
+#. description(texlive-specs-n:texlive-luabibentry-doc)
#, fuzzy
-msgid "List the external dependencies of a LaTeX document"
-msgstr "Tento balík obsahuje správce oken KDE a ikony pro KDE."
+msgid "This package includes the documentation for texlive-luabibentry"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(vim-plugins:vim-plugin-tregisters)
-msgid "List, edit, and run or execute registers and/or clipboards"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luabidi)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Bidirectional typesetting with LuaLaTeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. summary(vim-plugins:vim-plugin-tregisters)
-msgid "List, edit, and run/execute registers/clipboards"
-msgstr ""
-
-#. description(texlive-listofsymbols)
+#. description(texlive-specs-n:texlive-luabidi)
msgid ""
-"Listofsymbols provides commands to automatically create a list of symbols (also called notation or nomenclature), and to handle symbols logically, i.e. define a macro that is expanded to the desired output and use the macro in the text rather than `hardcoding' the output into the text. This helps to ensure consistency throughout the text, especially if there is a chance that symbols will be changed at some stage. The package is more or less a combination of what the packages nomencl and formula do. The concept of creating the list of symbols, though, is different from the way nomencl.sty does it.\n"
+"The package attempts to emulate the XeTeX bidi package, in teh context of LuaTeX.\n"
"\n"
-"date: 2009-11-29 12:21:16 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-listbib)
-msgid "Lists contents of BibTeX files"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luabidi-doc)
+#, fuzzy
+msgid "Documentation for texlive-luabidi"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lazylist)
-msgid "Lists in TeX's \"mouth\""
-msgstr ""
+#. description(texlive-specs-n:texlive-luabidi-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luabidi"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-plweb)
-msgid "Literate Programming for Prolog with LaTeX"
+#. summary(texlive-specs-n:texlive-luacode)
+msgid "Helper for executing lua code from within TeX"
msgstr ""
-#. summary(texlive-protex)
-msgid "Literate programming package"
+#. description(texlive-specs-n:texlive-luacode)
+msgid ""
+"Executing Lua code from within TeX with directlua can sometimes be tricky: there is no easy way to use the percent character, counting backslashes may be hard, and Lua comments don't work the way you expect. The package provides the \\luaexec command and the luacode(*) environments to help with these problems.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lithuanian)
+#. summary(texlive-specs-n:texlive-luacode-doc)
#, fuzzy
-msgid "Lithuanian language support"
-msgstr "Běhová javová knihovna pro gcc"
+msgid "Documentation for texlive-luacode"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-thesis-titlepage-fhac)
-msgid "Little style to create a standard titlepage for diploma thesis"
-msgstr ""
+#. description(texlive-specs-n:texlive-luacode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luacode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-properties)
-msgid "Load properties from a file"
+#. summary(texlive-specs-n:texlive-luaindex)
+msgid "Create index using lualatex"
msgstr ""
-#. summary(virtaal)
-msgid "Localization and translation editor"
+#. description(texlive-specs-n:texlive-luaindex)
+msgid ""
+"Luaindex provides (yet another) index processor, written in Lua.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mlist)
-msgid "Logical markup for lists"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luaindex-doc)
+#, fuzzy
+msgid "Documentation for texlive-luaindex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-luaxml)
+#. description(texlive-specs-n:texlive-luaindex-doc)
#, fuzzy
-msgid "Lua library for reading and serialising XML files"
-msgstr "Knihovna pro čtení a zápis quicktime souborů"
+msgid "This package includes the documentation for texlive-luaindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-luatex)
-msgid ""
-"LuaTeX is an extended version of pdfTeX using Lua as an embedded scripting language. The LuaTeX project's main objective is to provide an open and configurable variant of TeX while at the same time offering downward compatibility. LuaTeX uses Unicode (as UTF-8) as its default input encoding, and is able to use modern (OpenType) fonts (for both text and mathematics). It should be noted that LuaTeX is still under development; its specification has been declared stable, but absolute stability may not in practice be assumed.\n"
-"\n"
-"date: 2011-11-09 14:33:34 +0000"
+#. summary(texlive-specs-n:texlive-luainputenc)
+msgid "Replacing inputenc for use in LuaTeX"
msgstr ""
-#. description(texlive-luainputenc)
+#. description(texlive-specs-n:texlive-luainputenc)
msgid ""
"LuaTeX operates by default in UTF-8 input; thus LaTeX documents that need 8-bit character-sets need special treatment. (In fact, LaTeX documents using UTF-8 with \"traditional\" -- 256- glyph -- fonts also need support from this package.) The package, therefore, replaces the LaTeX standard inputenc for use under LuaTeX. With a current LuaTeX,the package has the same behaviour with LuaTeX as inputenc has under pdfTeX.\n"
"\n"
-"date: 2010-11-19 15:55:42 +0000"
+"date: 2014-04-30 13:31:14 +0000"
msgstr ""
-#. description(texlive-luaindex)
-msgid ""
-"Luaindex provides (yet another) index processor, written in Lua.\n"
-"\n"
-"date: 2011-08-19 08:28:18 +0000"
+#. summary(texlive-specs-n:texlive-luainputenc-doc)
+#, fuzzy
+msgid "Documentation for texlive-luainputenc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-luainputenc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luainputenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-luaintro)
+msgid "Examples from the book \"Einfuhrung in LuaTeX und LuaLaTeX\""
msgstr ""
-#. description(texlive-lualibs)
+#. description(texlive-specs-n:texlive-luaintro)
msgid ""
-"Lualibs is a collection of Lua modules useful for general programming. The bundle is based on lua modules shipped with ConTeXt, and are made available in this bundle for use independent of ConTeXt.\n"
+"The bundle provides source of all the examples published in the German book \"Einfuhrung in LuaTeX und LuaLaTeX\", published by Lehmans Media and DANTE, Berlin.\n"
"\n"
-"date: 2013-05-24 10:22:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-varindex)
-msgid "Luxury frontend to the \\index command"
+#. summary(texlive-specs-n:texlive-lualatex-doc)
+msgid "A guide to use of LaTeX with LuaTeX"
msgstr ""
-#. description(texlive-m-tx)
+#. description(texlive-specs-n:texlive-lualatex-doc)
msgid ""
-"M-Tx is a preprocessor to pmx, which is itself a preprocessor to musixtex, a music typesetting system. The prime motivation to the development of M-Tx was to provide lyrics for music to be typeset. In fact, pmx now provides a lyrics interface, but M-Tx continues in use by those who prefer its language.\n"
+"The document is a map/guide to the world of LuaLaTeX. Coverage supports both new users and package developers. Apart from the introductory material, the document gathers information from several sources, and offers links to others.\n"
"\n"
-"date: 2013-01-20 13:45:16 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-metaobj)
+#. summary(texlive-specs-n:texlive-lualatex-doc-de)
+#, fuzzy
+#| msgid "YaST2 - German translations."
+msgid "Guide to LuaLaTeX (German translation)"
+msgstr "YaST2 - Německé překlady"
+
+#. description(texlive-specs-n:texlive-lualatex-doc-de)
msgid ""
-"METAOBJ is a large metapost package providing high-level objects. It implements many of PSTricks' features for node connections, but also trees, matrices, and many other things. It more or less contains boxes.mp and rboxes.mp. There is a large (albeit not complete) documentation distributed with the package. It is easily extensible with new objects.\n"
+"The document is a German translation of the map/guide to the world of LuaLaTeX. Coverage supports both new users and package developers. Apart from the introductory material, the document gathers information from several sources, and offers links to others.\n"
"\n"
-"date: 2007-08-24 20:48:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-metatex)
-msgid ""
-"METATeX is a set of plain TeX and MetaFont macros that you can use to define both the text and the figures in a single source file. Because METATeX sets up two way communication, from TeX to MetaFont and back from MetaFont to TeX, drawing dimensions can be controlled by TeX and labels can be located by MetaFont. Only standard features of TeX and MetaFont are used, but two runs of TeX and one of MetaFont are needed.\n"
-"\n"
-"date: 2007-01-09 21:36:10 +0000"
+#. summary(texlive-specs-n:texlive-lualatex-math)
+msgid "Fixes for mathematics-related LuaLaTeX issues"
msgstr ""
-#. description(texlive-mhequ)
+#. description(texlive-specs-n:texlive-lualatex-math)
msgid ""
-"MHequ simplifies creating multi-column equation environments, and tagging the equations therein. It supports sub-numbers of blocks of equations (like (1.2a), (1.2b), etc) and references to each equation individually (1.2a) or to the whole block (1.2). The labels can be shown in draft mode. Comments in the package itself describe usage.\n"
+"The package patches a few commands of the LaTeX2e kernel and the amsmath and mathtools packages to be more compatible with the LuaTeX engine. It is only meaningful for LuaLaTeX documents containing mathematical formulas, and does not exhibit any new functionality. The fixes are mostly moved from the unicode-math package to this package since they are not directly related to Unicode mathematics typesetting.\n"
"\n"
-"date: 2008-05-01 18:41:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mltex)
-msgid ""
-"MLTeX is a modification of TeX version >=3.0 that allows the hyphenation of words with accented letters using ordinary Computer Modern (CM) fonts. The system is distributed as a TeX change file.\n"
-"\n"
-"date: 2012-07-16 20:11:02 +0000"
+#. summary(texlive-specs-n:texlive-lualatex-math-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-lualatex-math"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-lualatex-math-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lualatex-math"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-lualibs)
+msgid "Additional Lua functions for LuaTeX macro programmers"
msgstr ""
-#. description(texlive-jadetex)
+#. description(texlive-specs-n:texlive-lualibs)
msgid ""
-"Macro package on top of LaTeX to typeset TeX output of the Jade DSSSL implementation.\n"
+"Lualibs is a collection of Lua modules useful for general programming. The bundle is based on lua modules shipped with ConTeXt, and are made available in this bundle for use independent of ConTeXt.\n"
"\n"
-"date: 2008-04-20 17:53:04 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-piff)
-msgid "Macro tools by Mike Piff"
+#. summary(texlive-specs-n:texlive-lualibs-doc)
+#, fuzzy
+msgid "Documentation for texlive-lualibs"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-lualibs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lualibs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-luamplib)
+msgid "Use LuaTeX's built-in MetaPost interpreter"
msgstr ""
-#. description(texlive-ocherokee)
+#. description(texlive-specs-n:texlive-luamplib)
msgid ""
-"Macros and Type 1 fonts for Typesetting the Cherokee language with the Omega version of LaTeX (known as Lambda).\n"
+"The package enables the user to directly incorporate MetaPost diagrams into a document, using LuaTeX's built-in MetaPost library. The facility is only available in PDF mode.\n"
"\n"
-"date: 2007-03-11 23:37:02 +0000"
+"date: 2014-03-28 13:02:48 +0000"
msgstr ""
-#. summary(texlive-ptptex)
-msgid "Macros for 'Progress of Theoretical Physics'"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luamplib-doc)
+#, fuzzy
+msgid "Documentation for texlive-luamplib"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-tdsfrmath)
-msgid "Macros for French teachers of mathematics"
-msgstr ""
+#. description(texlive-specs-n:texlive-luamplib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luamplib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-procIAGssymp)
-msgid "Macros for IAG symposium papers"
+#. summary(texlive-specs-n:texlive-luaotfload)
+msgid "OpenType 'loader' for Plain TeX and LaTeX"
msgstr ""
-#. summary(texlive-IEEEconf)
-msgid "Macros for IEEE conference proceedings"
+#. description(texlive-specs-n:texlive-luaotfload)
+msgid ""
+"The package adopts the TrueType/OpenType Font loader code provided in ConTeXt, and adapts it to use in Plain TeX and LaTeX.\n"
+"\n"
+"date: 2014-05-18 20:49:49 +0000"
msgstr ""
-#. summary(texlive-sdrt)
-msgid "Macros for Segmented Discourse Representation Theory"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luaotfload-doc)
+#, fuzzy
+msgid "Documentation for texlive-luaotfload"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-susy)
-msgid "Macros for SuperSymmetry-related work"
-msgstr ""
+#. description(texlive-specs-n:texlive-luaotfload-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luaotfload"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lexikon)
-msgid "Macros for a two language dictionary"
+#. summary(texlive-specs-n:texlive-luasseq)
+msgid "Drawing spectral sequences in LuaLaTeX"
msgstr ""
-#. summary(texlive-pst-fit)
-msgid "Macros for curve fitting"
+#. description(texlive-specs-n:texlive-luasseq)
+msgid ""
+"The package is an update of the author's sseq package, for use with LuaLaTeX. This version uses less memory, and operates faster than the original; it also offers several enhancements.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ydoc)
-msgid "Macros for documentation of LaTeX classes and packages"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luasseq-doc)
+#, fuzzy
+msgid "Documentation for texlive-luasseq"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tkz-berge)
-msgid "Macros for drawing graphs of graph theory"
+#. description(texlive-specs-n:texlive-luasseq-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luasseq"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-luatex)
+msgid "The LuaTeX engine"
msgstr ""
-#. summary(texlive-mandi)
-msgid "Macros for introductory physics and astronomy"
+#. description(texlive-specs-n:texlive-luatex)
+msgid ""
+"LuaTeX is an extended version of pdfTeX using Lua as an embedded scripting language. The LuaTeX project's main objective is to provide an open and configurable variant of TeX while at the same time offering downward compatibility. LuaTeX uses Unicode (as UTF-8) as its default input encoding, and is able to use modern (OpenType) fonts (for both text and mathematics). It should be noted that LuaTeX is still under development; its specification has been declared stable, but absolute stability may not in practice be assumed.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-localloc)
+#. summary(texlive-specs-n:texlive-luatex-doc)
#, fuzzy
-msgid "Macros for localizing TeX register allocations"
-msgstr "Thajské překlady pro KDE"
+msgid "Documentation for texlive-luatex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mailing)
-msgid "Macros for mail merging"
-msgstr ""
+#. description(texlive-specs-n:texlive-luatex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luatex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-newsletr)
-msgid "Macros for making newsletters with Plain TeX"
+#. summary(texlive-specs-n:texlive-luatexbase)
+msgid "Basic resource management for LuaTeX code"
msgstr ""
-#. summary(texlive-ofs)
-msgid "Macros for managing large font collections"
+#. description(texlive-specs-n:texlive-luatexbase)
+msgid ""
+"The bundle provides basic facilities for LuaTeX macro programmers, mostly resource allocation and convenience packages. Provided are: luatexbase-attr: attribute allocation; luatexbase-cctb: catcode table allocation; luatexbase-compat: compatibility helpers; luatexbase-loader: Lua module loading; luatexbase-modutils: Lua module declaration; luatexbase-mcb: callbacks extension; and luatexbase-regs: allocation of registers and the like. In addition, the (unadorned) luatexbase package loads all the above in one fell swoop.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-polynom)
+#. summary(texlive-specs-n:texlive-luatexbase-doc)
#, fuzzy
-msgid "Macros for manipulating polynomials"
-msgstr "Knihovna pro práci s ID3v1 a ID3v2 tagy"
+msgid "Documentation for texlive-luatexbase"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-objectz)
-msgid "Macros for typesetting Object Z"
-msgstr ""
+#. description(texlive-specs-n:texlive-luatexbase-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luatexbase"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-toolbox)
-msgid "Macros for writing indices, glossaries"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luatexja)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset Japanese with lua(la)tex"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-karnaugh)
+#. description(texlive-specs-n:texlive-luatexja)
msgid ""
-"Macros intended for typesetting Karnaugh-Maps and Veitch-Charts in a simple and user-friendly way. Karnaugh-Maps and Veitch- Charts are used to display and simplify logic functions \"manually\". These macros can typeset Karnaugh-Maps and Veitch- Charts with up to ten variables (=1024 entries).\n"
+"The package offers support for typesetting Japanese documents with LuaTeX. Either of the Plain and LaTeX2e formats may be used with the package.\n"
"\n"
-"date: 2007-01-08 13:40:40 +0000"
+"date: 2014-05-04 07:22:35 +0000"
msgstr ""
-#. summary(texlive-jadetex)
-msgid "Macros supporting Jade DSSSL output"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luatexja-doc)
+#, fuzzy
+msgid "Documentation for texlive-luatexja"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-physics)
-msgid "Macros supporting the Mathematics of Physics"
-msgstr ""
+#. description(texlive-specs-n:texlive-luatexja-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luatexja"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mfpic4ode)
-msgid "Macros to draw direction fields and solutions of ODEs"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luatexko)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset Korean with Lua(La)TeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-treetex)
+#. description(texlive-specs-n:texlive-luatexko)
msgid ""
-"Macros to draw trees, within TeX (or LaTeX). The algorithm used is discussed in an accompanying paper (written using LaTeX 2.09).\n"
+"This is a Lua(La)TeX macro package that supports typesetting Korean documents. LuaTeX version 0.76+ and luaotfload package version 2.2+ are required. This package also requires both cjk- ko and xetexko packages for its full functionality.\n"
"\n"
-"date: 2012-01-20 10:26:32 +0000"
+"date: 2014-05-11 10:36:43 +0000"
msgstr ""
-#. summary(texlive-tex-ewd)
-msgid "Macros to typeset calculational proofs and programs in Dijkstra's style"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luatexko-doc)
+#, fuzzy
+msgid "Documentation for texlive-luatexko"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texapi)
-msgid "Macros to write format-independent packages"
+#. description(texlive-specs-n:texlive-luatexko-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luatexko"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-luatextra)
+msgid "Additional macros for Plain TeX and LaTeX in LuaTeX"
msgstr ""
-#. description(texlive-nrc)
+#. description(texlive-specs-n:texlive-luatextra)
msgid ""
-"Macros, and some documentation, for typesetting papers for submission to journals published by the National Research Council Research Press. At present, only nrc2.cls (for two- column layout) should be used.\n"
+"The package provides a coherent extended programming environment for use with luaTeX. It loads packages fontspec, luatexbase and lualibs, and provides additional user-level features and goodies. The package is under development, and its specification may be expected to change.\n"
"\n"
-"date: 2012-11-05 17:31:34 +0000"
+"date: 2014-04-30 13:31:14 +0000"
msgstr ""
-#. summary(texlive-magaz)
-msgid "Magazine layout"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luatextra-doc)
+#, fuzzy
+msgid "Documentation for texlive-luatextra"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tabfigures)
-msgid "Maintain vertical alignment of figures"
-msgstr ""
+#. description(texlive-specs-n:texlive-luatextra-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luatextra"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lcyw)
-msgid "Make Classic Cyrillic CM fonts accessible in LaTeX"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luaxml)
+#, fuzzy
+msgid "Lua library for reading and serialising XML files"
+msgstr "Knihovna pro čtení a zápis quicktime souborů"
-#. summary(texlive-purifyeps)
-msgid "Make EPS work with both LaTeX/dvips and pdfLaTeX"
+#. description(texlive-specs-n:texlive-luaxml)
+msgid ""
+"This is a redistribution of a pure lua xml library, LuaXML (this version supports Lua 5.2). The library was originally distributed as part of the odsfile package, but is made available separately in the hope that it can be useful for other projects.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pst-pdf)
-msgid "Make PDF versions of graphics by processing between runs"
-msgstr ""
+#. summary(texlive-specs-n:texlive-luaxml-doc)
+#, fuzzy
+msgid "Documentation for texlive-luaxml"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pkfix-helper)
-msgid "Make PostScript files accessible to pkfix"
-msgstr ""
+#. description(texlive-specs-n:texlive-luaxml-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-luaxml"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-todo)
-msgid "Make a to-do list for a document"
+#. summary(texlive-specs-n:texlive-lxfonts)
+msgid "Set of slide fonts based on CM"
msgstr ""
-#. summary(texlive-verbatimcopy)
-msgid "Make copies of text documents from within LaTeX"
+#. description(texlive-specs-n:texlive-lxfonts)
+msgid ""
+"The bundle contains the traditional slides fonts revised to be completely usable both as text fonts and mathematics fonts; they are fully integrate with the new operators, letters, symbols and extensible delimiter fonts, as well as with the AMS fonts, all redone with the same stylistic parameters.\n"
+"\n"
+"date: 2014-05-13 22:24:01 +0000"
msgstr ""
-#. summary(texlive-prettyref)
-msgid "Make label references \"self-identify\""
-msgstr ""
+#. summary(texlive-specs-n:texlive-lxfonts-doc)
+#, fuzzy
+msgid "Documentation for texlive-lxfonts"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ticket)
-msgid "Make labels, visting-cards, pins with LaTeX"
-msgstr ""
+#. description(texlive-specs-n:texlive-lxfonts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-lxfonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jlabels)
-msgid "Make letter-sized pages of labels"
+#. summary(texlive-specs-n:texlive-lxfonts-fonts)
+msgid "Severed fonts for texlive-lxfonts"
msgstr ""
-#. summary(texlive-maybemath)
-msgid "Make math bold or italic according to context"
+#. description(texlive-specs-n:texlive-lxfonts-fonts)
+msgid "The separated fonts package for texlive-lxfonts"
msgstr ""
-#. summary(texlive-seminar)
-msgid "Make overhead slides"
-msgstr ""
+#. summary(texlive-specs-n:texlive-ly1)
+#, fuzzy
+msgid "Support for LY1 LaTeX encoding"
+msgstr "Podpora Unicode pro LaTeX"
-#. summary(texlive-poster-mac)
-msgid "Make posters and banners with TeX"
+#. description(texlive-specs-n:texlive-ly1)
+msgid ""
+"The Y&Y 'texnansi' (TeX and ANSI, for Microsoft interpretations of ANSI standards) encoding lives on, even after the decease of the company; it is known in the LaTeX scheme of things as LY1 encoding. This bundle includes metrics and LaTeX macros to use the basic three (Times, Helvetica and Courier) Adobe Type 1 fonts in LaTeX using LY1 encoding.\n"
+"\n"
+"date: 2012-07-10 06:38:43 +0000"
msgstr ""
-#. summary(texlive-sciposter)
-msgid "Make posters of ISO A3 size and larger"
-msgstr ""
+#. summary(texlive-specs-n:texlive-ly1-doc)
+#, fuzzy
+msgid "Documentation for texlive-ly1"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-makecirc)
+#. description(texlive-specs-n:texlive-ly1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ly1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-m-tx)
+#, fuzzy
+#| msgid "TeX Processor for OpenJade"
+msgid "A preprocessor for pmx"
+msgstr "TeXový procesor pro OpenJade"
+
+#. description(texlive-specs-n:texlive-m-tx)
msgid ""
-"MakeCirc is a MetaPost library that contains diverse symbols for use in circuit diagrams. MakeCirc offers a high quality tool, with a simple syntax. MakeCirc is completely integrated with LaTeX documents and with other MetaPost drawing/graphic. Its output is a PostScript file. MakeCirc only requires (La)TeX and MetaPost to work.\n"
+"M-Tx is a preprocessor to pmx, which is itself a preprocessor to musixtex, a music typesetting system. The prime motivation to the development of M-Tx was to provide lyrics for music to be typeset. In fact, pmx now provides a lyrics interface, but M-Tx continues in use by those who prefer its language.\n"
"\n"
-"date: 2006-11-19 20:19:11 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mkgrkindex)
+#. summary(texlive-specs-n:texlive-m-tx-doc)
+#, fuzzy
+msgid "Documentation for texlive-m-tx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-m-tx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-m-tx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-macros2e)
+#, fuzzy
+#| msgid "A list of internet service providers"
+msgid "A list of internal LaTeX2e macros"
+msgstr "Seznam poskytovatelů Internetu"
+
+#. description(texlive-specs-n:texlive-macros2e)
msgid ""
-"Makeindex is resolutely stuck with Latin-based alphabets, so will not deal with Greek indexes, unaided. This package provides a Perl script that will transmute the index of a Greek document in such a way that makeindex will sort the entries according to the rules of the Greek alphabet.\n"
+"This document lists the internal macros defined by the LaTeX2e base files which can also be useful to package authors. The macros are hyper-linked to their description in source2e. For this to work both PDFs must be inside the same directory. This document is not yet complete in content and format and may miss some macros.\n"
"\n"
-"date: 2010-10-24 14:36:36 +0000"
+"date: 2013-08-19 11:55:31 +0000"
msgstr ""
-#. summary(texlive-mkgrkindex)
-msgid "Makeindex working with Greek"
-msgstr ""
+#. summary(texlive-specs-n:texlive-macroswap)
+#, fuzzy
+#| msgid "A Collection of Free Arabic Fonts"
+msgid "Swap the definitions of two LaTeX macros"
+msgstr "Sbírka volně dostupných arabských písem"
-#. description(texlive-secdot)
+#. description(texlive-specs-n:texlive-macroswap)
msgid ""
-"Makes the numbers of \\section commands come out with a trailing dot. Includes a command whereby the same can be made to happen with other sectioning commands.\n"
+"The package provides simple utility methods to swap the meaning (token expansion) of two macros by name.\n"
"\n"
-"date: 2010-10-17 08:06:32 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-koma-moderncvclassic)
-msgid "Makes the style and command of moderncv (style classic) available for koma-classes and thus compatible with biblatex"
-msgstr ""
+#. summary(texlive-specs-n:texlive-macroswap-doc)
+#, fuzzy
+msgid "Documentation for texlive-macroswap"
+msgstr "Dokumentace pro adaptx"
-#. summary(yast2-lxc)
-msgid "Management tool for Linux Containers (LXC)"
-msgstr ""
+#. description(texlive-specs-n:texlive-macroswap-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-macroswap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-spath3)
-msgid "Manipulate \"soft paths\" in PGF"
+#. summary(texlive-specs-n:texlive-mafr)
+msgid "Mathematics in accord with French usage"
msgstr ""
-#. summary(velocity:velocity-manual)
-msgid "Manual for velocity"
+#. description(texlive-specs-n:texlive-mafr)
+msgid ""
+"The package provides settings and macros for typesetting mathematics with LaTeX in compliance with French usage. It comes with two document classes, 'fiche' and 'cours', useful to create short high school documents such as tests or lessons. The documentation is in French.\n"
+"\n"
+"date: 2012-05-21 12:42:12 +0000"
msgstr ""
-#. summary(xalan-j2:xalan-j2-manual)
-msgid "Manual for xalan-j2"
-msgstr "Manuál xalan-j2"
+#. summary(texlive-specs-n:texlive-mafr-doc)
+#, fuzzy
+msgid "Documentation for texlive-mafr"
+msgstr "Dokumentace pro adaptx"
-#. summary(tkman)
-msgid "Manual-browser for X"
+#. description(texlive-specs-n:texlive-mafr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mafr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-magaz)
+msgid "Magazine layout"
msgstr ""
-#. description(texlive-substitutefont)
+#. description(texlive-specs-n:texlive-magaz)
msgid ""
-"Many free fonts are extensions of a basic font family with new glyphs or shapes. Such fonts may be given a new name due to licence reasons or to the creator's preference. The package facilitates the task of setting up a font family as substitute for another one, using its \\substitutefont command.\n"
+"The current version does special formatting for the first line of text in a paragraph. The package is part of a larger body of tools which remain in preparation.\n"
"\n"
-"date: 2012-07-08 12:35:29 +0000"
+"date: 2013-11-21 20:33:57 +0000"
msgstr ""
-#. summary(texlive-ytableau)
-msgid "Many-featured Young tableaux and Young diagrams"
-msgstr ""
+#. summary(texlive-specs-n:texlive-magaz-doc)
+#, fuzzy
+msgid "Documentation for texlive-magaz"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mnotes)
-msgid "Margin annotation for collaborative writing"
-msgstr ""
+#. description(texlive-specs-n:texlive-magaz-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-magaz"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-randbild)
-msgid "Marginal pictures"
+#. summary(texlive-specs-n:texlive-mailing)
+msgid "Macros for mail merging"
msgstr ""
-#. summary(texlive-lua-check-hyphen)
-msgid "Mark hyphenations in a document, for checking"
+#. description(texlive-specs-n:texlive-mailing)
+msgid ""
+"This package is for use when sending a large number of letters, all with the same body text. The package's \\addressfile command is used to specify who the letter is to be sent to; the body of the \\mailingtext command specifies the text of the letters, possibly using macros defined in the \\addressfile.\n"
+"\n"
+"date: 2012-05-25 20:58:30 +0000"
msgstr ""
-#. summary(texlive-notes)
-msgid "Mark sections of a document"
-msgstr ""
+#. summary(texlive-specs-n:texlive-mailing-doc)
+#, fuzzy
+#| msgid "Documentation for javamail."
+msgid "Documentation for texlive-mailing"
+msgstr "Dokumentace javamail."
-#. summary(texlive-vertbars)
-msgid "Mark vertical rules in margin of text"
-msgstr ""
+#. description(texlive-specs-n:texlive-mailing-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mailing"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-todonotes)
-msgid "Marking things to do in a LaTeX document"
+#. summary(texlive-specs-n:texlive-mailmerge)
+msgid "Repeating text field substitution"
msgstr ""
-#. description(texlive-marvosym)
+#. description(texlive-specs-n:texlive-mailmerge)
msgid ""
-"Martin Vogel's Symbol font (marvosym) contains the Euro currency symbol as defined by the European commission, along with symbols for structural engineering; symbols for steel cross-sections; astronomy signs (sun, moon, planets); the 12 signs of the zodiac; scissor symbols; CE sign and others. The package contains both the original TrueType font and the derived Type 1 font, together with support files for TeX (LaTeX).\n"
+"The package mailmerge provides an interface to produce text from a template, where fields are replaced by actual data, as in a database. The package may be used to produce several letters from a template, certificates or other such documents. It allows access to the entry number, number of entries and so on.\n"
"\n"
-"date: 2012-04-08 11:55:52 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-marvosym)
-msgid "Martin Vogel's Symbols (marvosym) font"
+#. summary(texlive-specs-n:texlive-mailmerge-doc)
+#, fuzzy
+#| msgid "Documentation for javamail."
+msgid "Documentation for texlive-mailmerge"
+msgstr "Dokumentace javamail."
+
+#. description(texlive-specs-n:texlive-mailmerge-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mailmerge"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-makebarcode)
+msgid "Print various kinds 2/5 and Code 39 bar codes"
msgstr ""
-#. description(texlive-mathabx)
+#. description(texlive-specs-n:texlive-makebarcode)
msgid ""
-"Mathabx is a set of 3 mathematical symbols font series: matha, mathb and mathx. They are defined by MetaFont code and should be of reasonable quality (bitmap output). Things change from time to time, so there is no claim of stability (encoding, metrics, design). The package includes Plain TeX and LaTeX support macros.\n"
+"The package contains macros for printing various 2/5 bar codes and Code 39 bar codes. The macros do not use fonts but create the bar codes directly using vertical rules. It is therefore possible to vary width to height ratio, ratio of thin and thick bars. The package is therefore convenient for printing ITF bar codes as well as bar codes for identification labels for HP storage media.\n"
"\n"
-"date: 2008-09-15 11:48:16 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mathdesign)
-msgid "Mathematical fonts to fit with particular text fonts"
-msgstr ""
+#. summary(texlive-specs-n:texlive-makebarcode-doc)
+#, fuzzy
+msgid "Documentation for texlive-makebarcode"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mnsymbol)
-msgid "Mathematical symbol font for Adobe MinionPro"
-msgstr ""
+#. description(texlive-specs-n:texlive-makebarcode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makebarcode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mafr)
-msgid "Mathematics in accord with French usage"
+#. summary(texlive-specs-n:texlive-makebox)
+msgid "Defines a \\makebox* command"
msgstr ""
-#. summary(texlive-isomath)
-msgid "Mathematics style for science and technology"
+#. description(texlive-specs-n:texlive-makebox)
+msgid ""
+"Define a \\makebox* command that does the same as a \\makebox command, except that the width is given by a sample text instead of an explicit length measure.\n"
+"\n"
+"date: 2012-04-03 16:09:05 +0000"
msgstr ""
-#. summary(texlive-tex-gyre-math)
-msgid "Maths fonts to match tex-gyre text fonts"
-msgstr ""
+#. summary(texlive-specs-n:texlive-makebox-doc)
+#, fuzzy
+msgid "Documentation for texlive-makebox"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sansmath)
-msgid "Maths in a sans font"
-msgstr ""
+#. description(texlive-specs-n:texlive-makebox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makebox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-qsymbols)
-msgid "Maths symbol abbreviations"
+#. summary(texlive-specs-n:texlive-makecell)
+msgid "Tabular column heads and multilined cells"
msgstr ""
-#. description(texlive-mathspic)
+#. description(texlive-specs-n:texlive-makecell)
msgid ""
-"MathsPIC(Perl) is a development of the earlier MathsPIC(DOS) program, now implemented as a Perl script, being much more portable than the earlier program. MathsPIC parses a plain text input file and generates a plain text output-file containing commands for drawing a diagram. Version 1.0 produces output containing PiCTeX and (La)TeX commands, which may then be processed by plain TeX or LaTeX in the usual way. MathsPIC also outputs a comprehensive log-file. MathsPIC facilitates creating figures using PiCTeX by providing an environment for manipulating named points and also allows the use of variables and maths (advance, multiply, and divide)--in short--it takes the pain out of PiCTeX. Both the original DOS version and the new Perl version are available.\n"
+"This package supports common layouts for tabular column heads in whole documents, based on one-column tabular environment. In addition, it can create multi-lined tabular cells. The Package also offers: a macro which changes the vertical space around all the cells in a tabular environment (similar to the function of the tabls package, but using the facilities of the array) ; macros for multirow cells, which use the facilities of the multirow package; macros to number rows in tables, or to skip cells; diagonally divided cells; horizontal lines in tabular environments with defined thickness.\n"
"\n"
-"date: 2012-05-21 13:40:40 +0000"
+"date: 2014-01-13 12:25:37 +0000"
msgstr ""
-#. summary(texlive-mattens)
-msgid "Matrices/tensor typesetting"
-msgstr ""
+#. summary(texlive-specs-n:texlive-makecell-doc)
+#, fuzzy
+msgid "Documentation for texlive-makecell"
+msgstr "Dokumentace pro adaptx"
-#. description(vim-plugins:vim-plugin-matrix)
-msgid "Matrix screensaver for VIM, inspired by Chris Allegretta's cmatrix."
-msgstr ""
+#. description(texlive-specs-n:texlive-makecell-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makecell"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(vim-plugins:vim-plugin-matrix)
-msgid "Matrix screensaver for vim"
+#. summary(texlive-specs-n:texlive-makecirc)
+msgid "A MetaPost library for drawing electrical circuit diagrams"
msgstr ""
-#. description(texlive-mex)
+#. description(texlive-specs-n:texlive-makecirc)
msgid ""
-"MeX is an adaptation of Plain TeX (MeX) and LaTeX209 (LaMeX) formats to the Polish language and to Polish printing customs. It contains a complete set of Metafont sources of Polish fonts, hyphenation rules for the Polish language and sources of formats.\n"
+"MakeCirc is a MetaPost library that contains diverse symbols for use in circuit diagrams. MakeCirc offers a high quality tool, with a simple syntax. MakeCirc is completely integrated with LaTeX documents and with other MetaPost drawing/graphic. Its output is a PostScript file. MakeCirc only requires (La)TeX and MetaPost to work.\n"
"\n"
-"date: 2011-04-11 10:20:39 +0000"
+"date: 2012-06-14 14:39:06 +0000"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-medical)
-msgid "Medical stamps collection for Tux Paint"
-msgstr ""
+#. summary(texlive-specs-n:texlive-makecirc-doc)
+#, fuzzy
+msgid "Documentation for texlive-makecirc"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-filesystem:texlive-scheme-medium)
-msgid "Medium scheme (small + more packages and languages)"
+#. description(texlive-specs-n:texlive-makecirc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makecirc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-makecmds)
+msgid "The new \\makecommand command always (re)defines a command"
msgstr ""
-#. summary(texlive-textmerg)
-msgid "Merge text in TeX and LaTeX"
+#. description(texlive-specs-n:texlive-makecmds)
+msgid ""
+"The package provides a \\makecommand command, which is like \\(re)newcommand except it always (re)defines a command. There is also \\makeenvironment and \\provideenvironment for environments.\n"
+"\n"
+"date: 2012-05-25 20:58:30 +0000"
msgstr ""
-#. summary(texlive-phonetic)
-msgid "MetaFont Phonetic fonts, based on Computer Modern"
+#. summary(texlive-specs-n:texlive-makecmds-doc)
+#, fuzzy
+msgid "Documentation for texlive-makecmds"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-makecmds-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makecmds"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-makedtx)
+msgid "Perl script to help generate dtx and ins files"
msgstr ""
-#. description(texlive-ocr-b)
+#. description(texlive-specs-n:texlive-makedtx)
msgid ""
-"MetaFont programs for OCR-B at several sizes.\n"
+"The makedtx bundle is provided to help LaTeX2e developers to write the code and documentation in separate files, and then combine them into a single .dtx file for distribution. It automatically generates the character table, and also writes the associated installation (.ins) script.\n"
"\n"
-"date: 2010-12-24 14:25:32 +0000"
+"date: 2012-05-21 12:42:12 +0000"
msgstr ""
-#. description(texlive-metaplot)
+#. summary(texlive-specs-n:texlive-makedtx-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-makedtx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-makedtx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makedtx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-makeglos)
+msgid "Include a glossary into a document"
+msgstr ""
+
+#. description(texlive-specs-n:texlive-makeglos)
msgid ""
-"MetaPlot is a set of Metapost macros for manipulating pre- generated plots (and similar objects), and formatting them for inclusion in a Metapost figure. The intent is that the plots can be generated by some outside program, in an abstract manner that does not require making decisions about on-page sizing and layout, and then they can be imported into MetaPlot and arranged using the full capabilities of Metapost. Metaplot also includes a very flexible set of macros for generating plot axes, which may be useful in other contexts as well. Presently, MetaPlot is in something of a pre-release beta state; it is quite functional, but the syntax of the commands are still potentially in flux. Bug reports and other suggestions would be most welcome!\n"
+"The package provides the means to include a glossary into a document. The glossary is prepared by an external program, such as xindy or makeindex, in the same way that an index is made.\n"
"\n"
-"date: 2006-11-09 20:17:58 +0000"
+"date: 2012-07-06 11:09:55 +0000"
msgstr ""
-#. summary(texlive-metauml)
-msgid "MetaPost library for typesetting UML diagrams"
-msgstr ""
+#. summary(texlive-specs-n:texlive-makeglos-doc)
+#, fuzzy
+msgid "Documentation for texlive-makeglos"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-suanpan)
-msgid "MetaPost macros for drawing Chinese and Japanese abaci"
-msgstr ""
+#. description(texlive-specs-n:texlive-makeglos-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makeglos"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-splines)
-msgid "MetaPost macros for drawing cubic spline interpolants"
+#. summary(texlive-specs-n:texlive-makeindex)
+msgid "Process index output to produce typesettable code"
msgstr ""
-#. description(texlive-venn)
+#. description(texlive-specs-n:texlive-makeindex)
msgid ""
-"MetaPost macros for venn diagrams.\n"
+"A general purpose hierarchical index generator; it accepts one or more input files (often produced by a text formatter such as TeX or troff), sorts the entries, and produces an output file which can be formatted. The formats of the input and output files are specified in a style file; by default, input is assumed to be an .idx file, as generated by LaTeX.\n"
"\n"
-"date: 2007-12-04 21:25:23 +0000"
+"date: 2011-09-24 07:40:13 +0000"
msgstr ""
-#. summary(texlive-metago)
-msgid "MetaPost output of Go positions"
-msgstr ""
+#. summary(texlive-specs-n:texlive-makeindex-doc)
+#, fuzzy
+msgid "Documentation for texlive-makeindex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-metaobj)
-msgid "MetaPost package providing high-level objects"
+#. description(texlive-specs-n:texlive-makeindex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makeindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-makeplot)
+msgid "Easy plots from Matlab in LaTeX"
msgstr ""
-#. description(texlive-metapost)
+#. description(texlive-specs-n:texlive-makeplot)
msgid ""
-"MetaPost uses a language based on that of Metafont to produce precise technical illustrations. Its output is scalable PostScript or SVG, rather than the bitmaps Metafont creates.\n"
+"Existing approaches to create EPS files from Matlab (laprint, mma2ltx, print -eps, etc.) aren't satisfactory; makeplot aims to resolve this problem. Makeplot is a LaTeX package that uses the pstricks pst-plot functions to plot data that it takes from Matlab output files.\n"
"\n"
-"date: 2013-06-17 11:46:30 +0000"
+"date: 2013-07-15 18:25:07 +0000"
msgstr ""
-#. description(texlive-metauml)
-msgid ""
-"MetaUML is a MetaPost library for typesetting UML diagrams, which provides a usable, human-friendly textual notation for UML, offering now support for class, package, activity, state, and use case diagrams.\n"
-"\n"
-"date: 2010-07-30 11:14:18 +0000"
+#. summary(texlive-specs-n:texlive-makeplot-doc)
+#, fuzzy
+msgid "Documentation for texlive-makeplot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-makeplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makeplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-makeshape)
+msgid "Declare new PGF shapes"
msgstr ""
-#. description(texlive-oldlatin)
+#. description(texlive-specs-n:texlive-makeshape)
msgid ""
-"Metafont sources modified from Computer Modern in order to generate \"long s\" which was used in old text.\n"
+"The package simplifies production of custom shapes with correct anchor borders, in PGF/TikZ; the only requirement is a PGF path describing the anchor border. The package also provides macros that help with the management of shape parameters, and the definition of anchor points.\n"
"\n"
-"date: 2010-04-29 05:59:03 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-jablantile)
-msgid "Metafont version of tiles in the style of Slavik Jablan"
+#. summary(texlive-specs-n:texlive-makeshape-doc)
+#, fuzzy
+msgid "Documentation for texlive-makeshape"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-makeshape-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-makeshape"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-mandi)
+msgid "Macros for introductory physics and astronomy"
msgstr ""
-#. description(texlive-mfpic)
+#. description(texlive-specs-n:texlive-mandi)
msgid ""
-"Mfpic is a scheme for producing pictures from (La)TeX commands. Commands \\mfpic and \\endmfpic (in LaTeX, the mfpic environment) enclose a group in which drawing commands may be placed. The commands generate a Meta-language file, which may be processed by Metapost (or even Metafont). The resulting image file will be read back in to the document to place the picture at the point where the original (La)TeX commands appeared. Note that the ability to use Metapost here means that the package works equally well in LaTeX and PDFLaTeX.\n"
+"The package contains commands for students and teachers of introductory physics. Commands for physical quantities intelligently handle SI units so the user need not do so. There are other features that should make LaTeX easy for introductory physics students.\n"
"\n"
-"date: 2012-12-04 15:44:12 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-twoup)
+#. summary(texlive-specs-n:texlive-mandi-doc)
+#, fuzzy
+msgid "Documentation for texlive-mandi"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-mandi-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mandi"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-manfnt)
+msgid "LaTeX support for the TeX book symbols"
+msgstr ""
+
+#. description(texlive-specs-n:texlive-manfnt)
msgid ""
-"MiKTeX and many other TeX implementations include tools for massaging PostScript into booklet and two-up printing -- that is, printing two logical pages side by side on one side of one sheet of paper. However, some LaTeX preliminaries are necessary to use those tools. The twoup package provides such preliminaries and gives advice on how to use the PostScript tools.\n"
+"A LaTeX package for easy access to the symbols of the Knuth's 'manual' font, such as the Dangerous Bend and Manual-errata Arrow.\n"
"\n"
-"date: 2007-02-27 13:52:52 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mslapa)
-msgid "Michael Landy's APA citation style"
+#. summary(texlive-specs-n:texlive-manfnt-fonts)
+msgid "Severed fonts for texlive-manfnt"
msgstr ""
-#. summary(kernel-firmware:ucode-amd)
-msgid "Microcode updates for AMD CPUs"
+#. description(texlive-specs-n:texlive-manfnt-fonts)
+msgid "The separated fonts package for texlive-manfnt"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-military)
-msgid "Military stamps collection for Tux Paint"
+#. summary(texlive-specs-n:texlive-manuscript)
+msgid "Emulate look of a document typed on a typewriter"
msgstr ""
-#. description(texlive-miniplot)
+#. description(texlive-specs-n:texlive-manuscript)
msgid ""
-"MiniPlot is a package to help the LaTeX user typeset EPS figures using an easy-to-use interface. Figures can be arranged as one-figure-only or as a collection of figures in columns and rows which can itself contain sub-figures in columns and rows. Wrapped figures are also supported. This package provides commands to display a framebox instead of the figure as the graphics package does already but additionally it writes useful information such as the label and scaling factor into these boxes.\n"
+"This package is designed for those who have to submit dissertations, etc., to institutions that still maintain the typewriter is the summit of non-professional printing.\n"
"\n"
-"date: 2010-03-14 22:57:23 +0000"
+"date: 2012-04-30 14:16:20 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-minibufexpl)
-msgid "Minibufexplorer allows to quickly switch buffers by double-clicking the appropriate \"tab\". Tabs get updated as buffers are opened and closed. Buffers that are modified get visually marked and buffers that are open in a window get visually marked."
-msgstr ""
+#. summary(texlive-specs-n:texlive-manuscript-doc)
+#, fuzzy
+msgid "Documentation for texlive-manuscript"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nicetext)
-msgid "Minimal markup for simple text (Wikipedia style) and documentation"
-msgstr ""
+#. description(texlive-specs-n:texlive-manuscript-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-manuscript"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-filesystem:texlive-scheme-minimal)
-msgid "Minimal scheme (plain only)"
+#. summary(texlive-specs-n:texlive-margbib)
+msgid "Display bibitem tags in the margins"
msgstr ""
-#. summary(yast2-devtools:yast2-buildtools)
-msgid "Minimal set of tools needed to build yast module"
+#. description(texlive-specs-n:texlive-margbib)
+msgid ""
+"The package redefines the 'thebibliography' environment to place the citation key into the margin.\n"
+"\n"
+"date: 2012-04-30 14:16:20 +0000"
msgstr ""
-#. summary(texlive-minipage-marginpar)
-msgid "Minipages with marginal notes"
-msgstr ""
+#. summary(texlive-specs-n:texlive-margbib-doc)
+#, fuzzy
+msgid "Documentation for texlive-margbib"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ltxmisc)
-msgid "Miscellaneous LaTeX packages, etcetera"
+#. description(texlive-specs-n:texlive-margbib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-margbib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-marginfix)
+msgid "Patch \\marginpar to avoid overfull margins"
msgstr ""
-#. summary(texlive-lhelp)
-#, fuzzy
-msgid "Miscellaneous helper packages"
-msgstr "Různé"
-
-#. description(texlive-jknapltx)
+#. description(texlive-specs-n:texlive-marginfix)
msgid ""
-"Miscellaneous macros by Jorg Knappen, including: - represent counters in greek; - Maxwell's non-commutative division; - latin1jk, latin2jk and latin3jk, which are their inputenc definition files that allow verbatim input in the respective ISO Latin codes; - blackboard bold fonts in maths; - use of RSFS fonts in maths; - extra alignments for \\parboxes; - swap Roman and Sans fonts; - transliterate semitic languages; - patches to make (La)TeX formulae embeddable in SGML; - use maths \"minus\" in text as appropriate; - simple Young tableaux.\n"
+"Authors using LaTeX to typeset books with significant margin material often run into the problem of long notes running off the bottom of the page. A typical workaround is to insert \\vshift commands by hand, but this is a tedious process that is invalidated when pagination changes. Another workaround is memoir's \\sidebar function, but this can be unsatisfying for short textual notes, and standard marginpars cannot be mixed with sidebars. This package implements a solution to make marginpars \"just work\" by keeping a list of floating inserts and arranging them intelligently in the output routine.\n"
"\n"
-"date: 2006-12-15 10:08:32 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-williams)
+#. summary(texlive-specs-n:texlive-marginfix-doc)
#, fuzzy
-msgid "Miscellaneous macros by Peter Williams"
-msgstr "Různé"
+msgid "Documentation for texlive-marginfix"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-js-misc)
+#. description(texlive-specs-n:texlive-marginfix-doc)
#, fuzzy
-msgid "Miscellaneous macros from Joachim Schrod"
-msgstr "Různé"
+msgid "This package includes the documentation for texlive-marginfix"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jknapltx)
+#. summary(texlive-specs-n:texlive-marginnote)
+msgid "Notes in the margin, even where \\marginpar fails"
+msgstr ""
+
+#. description(texlive-specs-n:texlive-marginnote)
+msgid ""
+"This package provides the command \\marginnote that may be used instead of \\marginpar at almost every place where \\marginpar cannot be used, e.g., inside floats, footnotes, or in frames made with the framed package.\n"
+"\n"
+"date: 2012-04-10 18:26:14 +0000"
+msgstr ""
+
+#. summary(texlive-specs-n:texlive-marginnote-doc)
#, fuzzy
-msgid "Miscellaneous packages by Joerg Knappen"
-msgstr "Různé"
+msgid "Documentation for texlive-marginnote"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mdwtools)
+#. description(texlive-specs-n:texlive-marginnote-doc)
#, fuzzy
-msgid "Miscellaneous tools by Mark Wooding"
-msgstr "Různé"
+msgid "This package includes the documentation for texlive-marginnote"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-match_parens)
-msgid ""
-"Mismatches of parentheses, braces, (angle) brackets, especially in TeX sources which may be rich in those, may be difficult to trace. This little script helps you by writing your text to standard output, after adding a left margin to your text, which will normally be almost empty, but will clearly show any mismatches.\n"
-"\n"
-"date: 2012-04-05 15:28:29 +0000"
+#. summary(texlive-specs-n:texlive-marvosym)
+msgid "Martin Vogel's Symbols (marvosym) font"
msgstr ""
-#. description(texlive-mkpattern)
+#. description(texlive-specs-n:texlive-marvosym)
msgid ""
-"Mkpattern is a general purpose program for the generation of hyphenation patterns, with definition of letter sets and template-like constructions. It also provides an easy way to handle different input and output encodings, and featgures generation of clean UTF-8 patterns. The package was used for the creation of the Galician patterns.\n"
+"Martin Vogel's Symbol font (marvosym) contains the Euro currency symbol as defined by the European commission, along with symbols for structural engineering; symbols for steel cross-sections; astronomy signs (sun, moon, planets); the 12 signs of the zodiac; scissor symbols; CE sign and others. The package contains both the original TrueType font and the derived Type 1 font, together with support files for TeX (LaTeX).\n"
"\n"
-"date: 2008-08-22 14:39:18 +0000"
+"date: 2014-05-13 22:24:01 +0000"
msgstr ""
-#. description(texlive-mnsymbol)
-msgid ""
-"MnSymbol is a symbol font family, designed to be used in conjunction with Adobe Minion Pro (via the MinionPro package). Almost all of LaTeX and AMS mathematical symbols are provided; remaining coverage is available from the MinionPro font with the MinionPro package. The fonts are available in both MetaFont and Adobe Type 1 formats, and a comprehensive support package is provided. While the fonts were designed to fit with Minon Pro, the design should fit well with other renaissance or baroque faces: indeed, it will probably work with most fonts that are neither too wide nor too thin, for example Palatino or Times; it is known to look good with Sabon. There is no package designed to configure its use with any font other than Minion Pro, but (for example) simply loading mnsymbol after mathpazo will probably do what is needed.\n"
-"\n"
-"date: 2008-08-22 13:19:59 +0000"
+#. summary(texlive-specs-n:texlive-marvosym-doc)
+#, fuzzy
+msgid "Documentation for texlive-marvosym"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-marvosym-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-marvosym"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-marvosym-fonts)
+msgid "Severed fonts for texlive-marvosym"
msgstr ""
-#. summary(wammu)
-msgid "Mobile Phone Manager"
+#. description(texlive-specs-n:texlive-marvosym-fonts)
+msgid "The separated fonts package for texlive-marvosym"
msgstr ""
-#. summary(texlive-polyglossia)
-msgid "Modern multilingual typesetting with XeLaTeX"
+#. summary(texlive-specs-n:texlive-matc3)
+msgid "Commands for MatematicaC3 textbooks"
msgstr ""
-#. description(texlive-tabls)
+#. description(texlive-specs-n:texlive-matc3)
msgid ""
-"Modifies LaTeX's array and tabular environments to keep text from touching other text or hlines above or below. Several new parameters are defined and some standard macros are re-defined. The package slows down compilation of tables, since each entry is boxed twice.\n"
+"The package provides support for the Matematica C3 project to produce free mathematical text books for use in Italian high schools.\n"
"\n"
-"date: 2010-03-09 12:13:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ltablex)
+#. summary(texlive-specs-n:texlive-matc3-doc)
+#, fuzzy
+msgid "Documentation for texlive-matc3"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-n:texlive-matc3-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-matc3"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-n:texlive-matc3mem)
+msgid "Class for MatematicaC3 textbooks"
+msgstr ""
+
+#. description(texlive-specs-n:texlive-matc3mem)
msgid ""
-"Modifies the tabularx environment to combine the features of the tabularx package (auto-sized columns in a fixed width table) with those of the longtable package (multi-page tables).\n"
+"The class is a development of memoir, with additions (specifically, mathematical extensions) that provide support for writing the books for the Matematica C3 project to produce free mathematical textbooks for use in Italian high schools.\n"
"\n"
-"date: 2013-04-12 08:31:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-section)
-msgid "Modifying section commands in LaTeX"
-msgstr ""
+#. summary(texlive-specs-n:texlive-matc3mem-doc)
+#, fuzzy
+msgid "Documentation for texlive-matc3mem"
+msgstr "Dokumentace pro adaptx"
-#. description(yast2-reipl)
-msgid "Module for loading IPL from running system on S/390"
+#. description(texlive-specs-n:texlive-matc3mem-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-matc3mem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-match_parens)
+msgid "Find mismatches of parentheses, braces, (angle) brackets, in texts"
msgstr ""
-#. description(texlive-montex)
+#. description(texlive-specs-o:texlive-match_parens)
msgid ""
-"MonTeX provides Mongolian and Manju support for the TeX/LaTeX community. Mongolian is a language spoken in North East Asia, namely Mongolia and the Inner Mongol Autonomous Region of China. Today, it is written in an extended Cyrillic alphabet in Mongolia whereas the Uighur writing continues to be in use in Inner Mongolia, though it is also, legally speaking, the official writing system of Mongolia. Manju is another language of North East Asia, belonging to the Tungusic branch of the Altaic languages. Though it is hardly spoken nowadays, it survives in written form as Manju was the native language of the rulers of the Qing dynasty (1644-1911) in China. Large quantities of documents of the Imperial Archives survive, as well as some of the finest dictionaries ever compiled in Asia, like the Pentaglot, a dictionary comprising Manju, Tibetan, Mongolian, Uighur and Chinese. MonTeX provides all necessary characters for writing standard Mongolian in Cyrillic and Classical (aka Traditional
or Uighur) writing, and Manju as well as transliterated Tibetan texts, for which purpose a number of additional characters was created. In MonTeX, both Mongolian and Manju are entered in romanized form. The retransliteration (from Latin input to Mongolian and Manju output) is completely realized in TeX/Metafont so that no external preprocessor is required. Please note that most of the enhanced functions of MonTeX require a working e-LaTeX environment. This is especially true when compiling documents with Mongolian or Manju as the main document language. It is recommended to choose pdfelatex as the resulting PDF files are truly portable. Vertical text generated by MonTeX is not supported in DVI.\n"
+"Mismatches of parentheses, braces, (angle) brackets, especially in TeX sources which may be rich in those, may be difficult to trace. This little script helps you by writing your text to standard output, after adding a left margin to your text, which will normally be almost empty, but will clearly show any mismatches.\n"
"\n"
-"date: 2012-07-07 20:27:26 +0000"
+"date: 2014-04-27 10:24:51 +0000"
msgstr ""
-#. summary(texlive-montex)
-msgid "Mongolian LaTeX"
-msgstr ""
+#. summary(texlive-specs-o:texlive-match_parens-doc)
+#, fuzzy
+msgid "Documentation for texlive-match_parens"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-moreenum)
-msgid "More enumeration options"
-msgstr ""
+#. description(texlive-specs-o:texlive-match_parens-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-match_parens"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(xemacs:xemacs-el)
-msgid "Most Emacs-Lisp source files are not needed for running XEmacs. Most of them are also available in byte compiled form and therefore not necessary at runtime. The true XEmacs addict will install them nevertheless because it is often useful and enlightening to have a look at the Lisp sources."
-msgstr "Několik programů v Emacs-Lispu, které nejsou nezbytné pro běh XEmacsu. Většina z těchto souborů je již přeložena a proto nejsou nezbytné. Skutečný XEmacs je však vyžaduje nainstalovat."
-
-#. summary(texlive-topfloat)
-msgid "Move floats to the top of the page"
+#. summary(texlive-specs-o:texlive-math-e)
+msgid "Examples from the book Typesetting Mathematics with LaTeX"
msgstr ""
-#. summary(texlive-mptopdf)
-msgid "Mpost to PDF, native MetaPost graphics inclusion"
+#. description(texlive-specs-o:texlive-math-e)
+msgid ""
+"The bundle contains all the examples from the (English) book \"Typesetting Mathematics with LaTeX\" (UIT Press, Cambridge, 2010). The examples are stand alone documents and may be separately processed with LaTeX or PDFLaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-multenum)
-msgid "Multi-column enumerated lists"
+#. summary(texlive-specs-o:texlive-mathabx)
+msgid "Three series of mathematical symbols"
msgstr ""
-#. description(texlive-multibib)
+#. description(texlive-specs-o:texlive-mathabx)
msgid ""
-"Multibib the creation of references to multiple bibliographies within one document. It thus provides complementary functionality to packages like bibunits and chapterbib, which allow the creation of one bibliography for multiple, but different parts of the document. Multibib is compatible with inlinebib, natbib, and koma-script.\n"
+"Mathabx is a set of 3 mathematical symbols font series: matha, mathb and mathx. They are defined by Metafont code and should be of reasonable quality (bitmap output). Things change from time to time, so there is no claim of stability (encoding, metrics, design). The package includes Plain TeX and LaTeX support macros. A version of the fonts, in Adobe Type 1 format, is also available.\n"
"\n"
-"date: 2008-12-10 19:42:30 +0000"
+"date: 2014-05-14 14:12:10 +0000"
msgstr ""
-#. summary(texlive-mhequ)
-msgid "Multicolumn equations, tags, labels, sub-numbering"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mathabx-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathabx"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-movie15)
+#. description(texlive-specs-o:texlive-mathabx-doc)
#, fuzzy
-msgid "Multimedia inclusion package"
-msgstr "Aktualizovat balíky"
+msgid "This package includes the documentation for texlive-mathabx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-media9)
-msgid "Multimedia inclusion package with Adobe Reader-9/X compatibility"
+#. summary(texlive-specs-o:texlive-mathabx-type1)
+#, fuzzy
+#| msgid "Unicode Version of the Computer Modern Fonts"
+msgid "Outline version of the mathabx fonts"
+msgstr "Unicode verze písem Computer Modern"
+
+#. description(texlive-specs-o:texlive-mathabx-type1)
+msgid ""
+"This is an Adobe Type 1 outline version of the mathabx fonts.\n"
+"\n"
+"date: 2014-05-14 14:12:10 +0000"
msgstr ""
-#. summary(texlive-multibbl)
+#. summary(texlive-specs-o:texlive-mathabx-type1-doc)
#, fuzzy
-#| msgid "Multiple Move"
-msgid "Multiple bibliographies"
-msgstr "Program pro přesun a přejmenování více souborů"
+msgid "Documentation for texlive-mathabx-type1"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multibib)
-msgid "Multiple bibliographies within one document"
-msgstr ""
+#. description(texlive-specs-o:texlive-mathabx-type1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathabx-type1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-paracol)
-msgid "Multiple columns with texts \"in parallel\""
+#. summary(texlive-specs-o:texlive-mathabx-type1-fonts)
+msgid "Severed fonts for texlive-mathabx-type1"
msgstr ""
-#. summary(texlive-mcite)
-msgid "Multiple items in a single citation"
+#. description(texlive-specs-o:texlive-mathabx-type1-fonts)
+msgid "The separated fonts package for texlive-mathabx-type1"
msgstr ""
-#. summary(texlive-iitem)
-msgid "Multiple level of lists in one list-like environment"
+#. summary(texlive-specs-o:texlive-mathalfa)
+msgid "General package for loading maths alphabets in LaTeX"
msgstr ""
-#. summary(texlive-multibibliography)
-msgid "Multiple versions of a bibliography, with different sort orders"
+#. description(texlive-specs-o:texlive-mathalfa)
+msgid ""
+"The package provides means of loading maths alphabets (such as are normally addressed via macros \\mathcal, \\mathbb, \\mathfrak and \\mathscr), offering various features normally missing in existing packages for this job.\n"
+"\n"
+"date: 2014-03-14 10:26:43 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-multiplesearch)
-msgid "MultipleSearch allows you to have the results of multiple searches displayed on the screen at the same time. Each search highlights its results in a different color, and all searches are displayed at once. After the maximum number of colors is used, the script starts over with the first color."
+#. summary(texlive-specs-o:texlive-mathalfa-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathalfa"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mathalfa-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathalfa"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mathastext)
+msgid "Use the text font in maths mode"
msgstr ""
-#. description(texlive-musixtex)
+#. description(texlive-specs-o:texlive-mathastext)
msgid ""
-"MusiXTeX provides a set of macros, based on the earlier MusicTeX, for typesetting music with TeX. To produce optimal spacing, MusixTeX is a three-pass system: etex, musixflx, and etex again. (Musixflx is a lua script that is provided in the bundle.) The three-pass process, optionally followed by processing for printed output, is automated by the musixtex wrapper script. The package uses its own specialised fonts, which must be available on the system for musixtex to run. This version of MusixTeX builds upon work by Andreas Egler, whose own version is no longer being developed. The MusiXTeX macros are universally acknowledged to be challenging to use directly: the pmx preprocessor compiles a simpler input language to MusixTeX macros..\n"
+"The package uses a text font (usually the document's text font) for the letters of the Latin alphabet needed when typesetting mathematics. (Optionally, other characters in the font may also be used). This facility makes possible (for a document with simple mathematics) a far wider choice of text font, with little worry that no specially designed accompanying maths fonts are available. The package also offers a simple mechanism for using many different choices of (text hence, now, maths) font in the same document. Of course, using one font for two purposes helps produce smaller PDF files. The package, running under LuaTeX, requires the TeX live 2013 distribution (or later).\n"
"\n"
-"date: 2013-01-26 19:44:01 +0000"
+"date: 2014-05-24 18:26:51 +0000"
msgstr ""
-#. summary(vegastrike-music)
-msgid "Music for Vega Strike"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mathastext-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-mathastext"
+msgstr "Dokumentace pro adaptx"
-#. description(vegastrike-music)
-msgid "Music for Vega Strike, a 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt. This archive contains the music files necessary to hear music in VegaStrike. These files are *not* essential to play the game."
-msgstr ""
+#. description(texlive-specs-o:texlive-mathastext-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathastext"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nameauth)
-msgid "Name authority mechanism for consistency in body text and index"
+#. summary(texlive-specs-o:texlive-mathcomp)
+msgid "Text symbols in maths mode"
msgstr ""
-#. description(texlive-nanumtype1)
+#. description(texlive-specs-o:texlive-mathcomp)
msgid ""
-"Nanum is a unicode font designed especially for Korean-language script. The font was designed by Sandoll Communication and Fontrix; it includes the sans serif (gothic), serif (myeongjo), pen script and brush script typefaces. The package provides Type1 subfonts converted from Nanum Myeongjo (Regular and ExtraBold) and Nanum Gothic (Regular and Bold) OTFs. C70, LUC, T1, and TS1 font definition files are also provided. (The package does not include OpenType/TrueType files, which are available from Naver)\n"
+"A package which provides access to some interesting characters of the Text Companion fonts (TS1 encoding) in maths mode.\n"
"\n"
-"date: 2013-03-25 17:47:44 +0000"
+"date: 2012-05-25 20:58:30 +0000"
msgstr ""
-#. description(texlive-nath)
+#. summary(texlive-specs-o:texlive-mathcomp-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathcomp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mathcomp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathcomp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mathdesign)
+msgid "Mathematical fonts to fit with particular text fonts"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-mathdesign)
msgid ""
-"Nath is a LaTeX (both 2e and 2.09) style to separate presentation and content in mathematical typography. The style delivers a particular context-dependent presentation on the basis of a rather coarse context-independent notation. Highlighted features: depending on the context, the command \\frac produces either built-up or case or solidus fractions, with parentheses added whenever required for preservation of the mathematical meaning; delimiters adapt their size to the material enclosed, rendering \\left and \\right almost obsolete.\n"
+"The Math Design project offers free mathematical fonts that match with existing text fonts. To date, three free font families are available: Adobe Utopia, URW Garamond and Bitstream Charter. Three commercial fonts are also supported: Adobe Garamond Pro, Adobe UtopiaStd and ITC Charter. Mathdesign covers the whole LaTeX glyph set, including AMS symbols and some extra. Both roman and bold versions of these symbols can be used. Moreover you can choose between three greek fonts (two of them created by the Greek Font Society).\n"
"\n"
-"date: 2006-12-22 13:37:19 +0000"
+"date: 2014-05-14 14:12:10 +0000"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-naturalforces)
-msgid "Natural forces stamps collection for Tux Paint"
+#. summary(texlive-specs-o:texlive-mathdesign-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathdesign"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mathdesign-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathdesign"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mathdesign-fonts)
+msgid "Severed fonts for texlive-mathdesign"
msgstr ""
-#. summary(texlive-nath)
-msgid "Natural mathematics notation"
+#. description(texlive-specs-o:texlive-mathdesign-fonts)
+msgid "The separated fonts package for texlive-mathdesign"
msgstr ""
-#. description(texlive-nature)
-msgid ""
-"Nature does not accept papers in LaTeX, but it does accept PDF. This class and BibTeX style provide what seems to be necessary to produce papers in a format acceptable to the publisher.\n"
-"\n"
-"date: 2008-09-15 11:49:48 +0000"
+#. summary(texlive-specs-o:texlive-mathdots)
+msgid "Commands to produce dots in math that respect font size"
msgstr ""
-#. description(texlive-navigator)
+#. description(texlive-specs-o:texlive-mathdots)
msgid ""
-"Navigator implements PDF features for all formats (with some limitations in ConTeXt) with PDFTeX, LuaTeX and XeTeX (i.e. xdvipdfmx). Features include: - Customizable outlines (i.e. bookmarks); - Anchors; - Links and actions (e.g. JavaScript or user-defined PDF actions); - File embedding (not in ConTeXt); - Document information and PDF viewer's display (not in ConTeXt); and - Commands to create and use raw PDF objects. Navigator requires texapi and yax, both version at least 1.03.\n"
+"Redefines \\ddots and \\vdots, and defines \\iddots. The dots produced by \\iddots slant in the opposite direction to \\ddots. All the commands are designed to change size appropriately in scripts, as well as in response to LaTeX size changing commands. The commands may also be used in plain TeX.\n"
"\n"
-"date: 2012-11-14 16:56:09 +0000"
+"date: 2012-07-06 11:09:55 +0000"
msgstr ""
-#. summary(texlive-pict2e)
+#. summary(texlive-specs-o:texlive-mathdots-doc)
#, fuzzy
-msgid "New implementation of picture commands"
-msgstr "Svobodná implementace IEEE 802.1X protokolu"
+msgid "Documentation for texlive-mathdots"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nolbreaks)
-msgid "No line breaks in text"
-msgstr ""
+#. description(texlive-specs-o:texlive-mathdots-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathdots"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nopageno)
-msgid "No page numbers in LaTeX documents"
+#. summary(texlive-specs-o:texlive-mathexam)
+msgid "Package for typesetting exams"
msgstr ""
-#. summary(texlive-pst-node)
-msgid "Nodes and node connections in pstricks"
+#. description(texlive-specs-o:texlive-mathexam)
+msgid ""
+"The package can help you typeset exams (mostly in mathematics and related disciplines where students are required to show their calculations followed by one or more short answers). It provides commands for inclusion of space for calculations, as well as commands for automatic creation of \"answer spaces\". In addition, the package will automatically create page headers and footers, and will let you include instructions and space for students to put their name.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-nomentbl)
-msgid "Nomenclature typeset in a longtable"
+#. summary(texlive-specs-o:texlive-mathexam-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathexam"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mathexam-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathexam"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mathpazo)
+msgid "Fonts to typeset mathematics to match Palatino"
msgstr ""
-#. description(texlive-nomentbl)
+#. description(texlive-specs-o:texlive-mathpazo)
msgid ""
-"Nomentbl typeset nomenclatures in a longtable instead of the makeindex style of nomencl. A nomenclature entry may have three arguments: Symbol, description and physical unit.\n"
+"The Pazo Math fonts are a family of PostScript fonts suitable for typesetting mathematics in combination with the Palatino family of text fonts. The Pazo Math family is made up of five fonts provided in Adobe Type 1 format (PazoMath, PazoMath- Italic, PazoMath-Bold, PazoMath-BoldItalic, and PazoMathBlackboardBold). These contain, in designs that match Palatino, glyphs that are usually not available in Palatino and for which Computer Modern looks odd when combined with Palatino. These glyphs include the uppercase Greek alphabet in upright and slanted shapes in regular and bold weights, the lowercase Greek alphabet in slanted shape in regular and bold weights, several mathematical glyphs (partialdiff, summation, product, coproduct, emptyset, infinity, and proportional) in regular and bold weights, other glyphs (Euro and dotlessj) in upright and slanted shapes in regular and bold weights, and the uppercase letters commonly used to represent various number sets (C, I, N, Q, R, and Z) i
n blackboard bold. The set also includes a set of 'true' small-caps fonts, also suitable for use with Palatino (or one of its clones). LaTeX macro support (using package mathpazo.sty) is provided in psnfss (a required part of any LaTeX distribution).\n"
"\n"
-"date: 2007-01-11 23:17:35 +0000"
+"date: 2014-05-14 16:47:06 +0000"
msgstr ""
-#. summary(texlive-nonfloat)
-msgid "Non-floating table and figure captions"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mathpazo-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathpazo"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nuc)
+#. description(texlive-specs-o:texlive-mathpazo-doc)
#, fuzzy
-#| msgid "Documentation for castor"
-msgid "Notation for nuclear isotopes"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-mathpazo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-parnotes)
-msgid "Notes after every paragraph (or elsewhere)"
+#. summary(texlive-specs-o:texlive-mathpazo-fonts)
+msgid "Severed fonts for texlive-mathpazo"
msgstr ""
-#. summary(texlive-pagenote)
-msgid "Notes at end of document"
+#. description(texlive-specs-o:texlive-mathpazo-fonts)
+msgid "The separated fonts package for texlive-mathpazo"
msgstr ""
-#. summary(texlive-threeparttablex)
-msgid "Notes in longtables"
+#. summary(texlive-specs-o:texlive-mathspec)
+msgid "Specify arbitrary fonts for mathematics in XeTeX"
msgstr ""
-#. summary(texlive-mbenotes)
-msgid "Notes in tables or images"
+#. description(texlive-specs-o:texlive-mathspec)
+msgid ""
+"The mathspec package provides an interface to typeset mathematics in XeLaTeX with arbitrary text fonts using fontspec as a backend. The package is under development and later versions might to be incompatible with this version, as this version is incompatible with earlier versions. The package requires at least version 0.9995 of XeTeX.\n"
+"\n"
+"date: 2014-05-14 16:47:06 +0000"
msgstr ""
-#. summary(texlive-marginnote)
-msgid "Notes in the margin, even where \\marginpar fails"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mathspec-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathspec"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-memdesign)
-msgid "Notes on book design"
-msgstr ""
+#. description(texlive-specs-o:texlive-mathspec-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathspec"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nddiss)
-msgid "Notre Dame Dissertation format class"
+#. summary(texlive-specs-o:texlive-mathspic)
+msgid "A Perl filter program for use with PiCTeX"
msgstr ""
-#. summary(texlive-vruler)
-msgid "Numbering text"
+#. description(texlive-specs-o:texlive-mathspic)
+msgid ""
+"MathsPIC(Perl) is a development of the earlier MathsPIC(DOS) program, now implemented as a Perl script, being much more portable than the earlier program. MathsPIC parses a plain text input file and generates a plain text output-file containing commands for drawing a diagram. Version 1.0 produces output containing PiCTeX and (La)TeX commands, which may then be processed by plain TeX or LaTeX in the usual way. MathsPIC also outputs a comprehensive log-file. MathsPIC facilitates creating figures using PiCTeX by providing an environment for manipulating named points and also allows the use of variables and maths (advance, multiply, and divide)--in short--it takes the pain out of PiCTeX. Both the original DOS version and the new Perl version are available.\n"
+"\n"
+"date: 2012-05-21 13:40:40 +0000"
msgstr ""
-#. summary(texlive-iopart-num)
-msgid "Numeric citation style for IOP journals"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mathspic-doc)
+#, fuzzy
+msgid "Documentation for texlive-mathspic"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ocr-b-outline)
-msgid "OCR-B fonts in Type 1 and OpenType"
+#. description(texlive-specs-o:texlive-mathspic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mathspic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mattens)
+msgid "Matrices/tensor typesetting"
msgstr ""
-#. description(texlive-ofs)
+#. description(texlive-specs-o:texlive-mattens)
msgid ""
-"OFS (Olsak's Font System) is a set of Plain TeX and LaTeX macros for managing large font collections; it has been used by Czech/Slovak users for many years. Main features include: - Mapping from long names of fonts to the metric file name. The user can specify only exact long names in documents. - Support for many font encodings. - Printing of catalogues of fonts and test samples of font families; the interactive macro \\showfonts shows all font families you have installed via OFS. - The user interface is the same for Plain TeX and for LaTeX, but the implementation differs: the LaTeX variant of OFS uses NFSS, but the Plain variant implements its own font management (which may even be better than NFSS) - Support for math fonts including TX fonts.\n"
+"The mattens package contains the definitions to typeset matrices, vectors and tensors as used in the engineering community for the representation of common vectors and tensors such as forces, velocities, moments of inertia, etc.\n"
"\n"
-"date: 2010-02-12 20:26:56 +0000"
+"date: 2012-07-06 15:29:31 +0000"
msgstr ""
-#. summary(texlive-l2tabu)
-msgid "Obsolete packages and commands"
+#. summary(texlive-specs-o:texlive-mattens-doc)
+#, fuzzy
+msgid "Documentation for texlive-mattens"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mattens-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mattens"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-maybemath)
+msgid "Make math bold or italic according to context"
msgstr ""
-#. description(texlive-tsemlines)
+#. description(texlive-specs-o:texlive-maybemath)
msgid ""
-"Occasional Documents appear, that use graphics generated by texcad from the emtex distribution. These documents often use the \\emline macro, which produced lines at an arbitrary orientation. The present package emulates the macro, using TikZ.\n"
+"The \\maybebm and \\maybeit macros can be used in maths expressions to make the arguments typeset as bold or italic respectively if the surrounding context is appropriate. They are useful for writing user macros for use in general contexts. \\maybebm is especially appropriate when section titles contain math expressions, since the title will appear bold but the header and table of contents usually replicate the title in normal width. It uses the bm package to make things bold \\maybeit performs a similar role to \\mathrm{} but the maths expression will be italicised if the surrounding text is. \\maybeitsubscript is provided to shift subscripts to the left if the expression is italicised.\n"
"\n"
-"date: 2011-06-28 11:55:08 +0000"
+"date: 2012-05-10 14:56:05 +0000"
msgstr ""
-#. summary(thessalonica-oldstandard-fonts:thessalonica-oldstandard-ttf-fonts)
-msgid "Old Standard Font Family (TrueType Format)"
+#. summary(texlive-specs-o:texlive-maybemath-doc)
+#, fuzzy
+msgid "Documentation for texlive-maybemath"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-maybemath-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-maybemath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mbenotes)
+msgid "Notes in tables or images"
msgstr ""
-#. description(texlive-oldstandard)
+#. description(texlive-specs-o:texlive-mbenotes)
msgid ""
-"Old Standard is designed to reproduce the actual printing style of the early 20th century, reviving a specific type of Modern (classicist) style of serif typefaces, very commonly used in various editions of the late 19th and early 20th century, but almost completely abandoned later. The font supports typesetting of Old and Middle English, Old Icelandic, Cyrillic (with historical characters, extensions for Old Slavonic and localised forms), Gothic transliterations, critical editions of Classical Greek and Latin, and many more. Old Standard works with TeX engines that directly support OpenType features, such as XeTeX and LuaTeX.\n"
+"The package defines a command \\tabnote, which stores notes for later processing by the command \\thetabnotes, and a corresponding \\imgnote for images. The package is derived from mechanisms in the package endnotes.\n"
"\n"
-"date: 2012-11-14 10:47:31 +0000"
+"date: 2014-04-06 23:03:43 +0000"
msgstr ""
-#. description(thessalonica-oldstandard-fonts:thessalonica-oldstandard-ttf-fonts)
+#. summary(texlive-specs-o:texlive-mbenotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-mbenotes"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mbenotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mbenotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mcaption)
+msgid "Put captions in the margin"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-mcaption)
msgid ""
-"Old Standard was intended as a multilingual font family suitable for biblical, classical and medieval studies as well as for general-purpose typesetting in languages which use Greek or Cyrillic script. The font is currently available in three shapes: regular, italic and bold. Old Standard is still far from being finished, and yet it already covers a wide range of Latin, Greek and Cyrillic characters. It also supports early Cyrillic letters and signs (including those added in Unicode 5.1) and thus can be used for texts containing fragments in Old Slavonic and Church Slavonic languages.\n"
+"The mcaption package provides an mcaption environment which puts figure or table captions in the margin. The package works with the standard classes and with the KOMA-Script document classes scrartcl, scrreprt and scrbook. The package requires the changepage package.\n"
"\n"
-"This package contains fonts in TrueType format."
+"date: 2012-05-16 11:34:59 +0000"
msgstr ""
-#. summary(texlive-oldstandard)
-msgid "Old Standard: A Unicode Font for Classical and Medieval Studies"
+#. summary(texlive-specs-o:texlive-mcaption-doc)
+#, fuzzy
+msgid "Documentation for texlive-mcaption"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-o:texlive-mcaption-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mcaption"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mceinleger)
+msgid "Creating covers for music cassettes"
msgstr ""
-#. description(texlive-nag)
+#. description(texlive-specs-o:texlive-mceinleger)
msgid ""
-"Old habits die hard. All the same, there are commands, classes and packages which are outdated and superseded. The nag package provides routines to warn the user about the use of such obsolete things. As an example, we provide an extension that detects many of the \"sins\" described in l2tabu.\n"
+"A package for creating MC-covers on your own. It allows the creation of simple covers as well as covers with an additional page for more information about the cassette (table of contents e.g.). The rotating package is required.\n"
"\n"
-"date: 2011-12-03 10:39:13 +0000"
+"date: 2012-05-28 10:27:21 +0000"
msgstr ""
-#. summary(texlive-oldstyle)
-msgid "Old style numbers in OT1 encoding"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mceinleger-doc)
+#, fuzzy
+msgid "Documentation for texlive-mceinleger"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lecturer)
-msgid "On-screen presentations for (almost) all formats"
+#. description(texlive-specs-o:texlive-mceinleger-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mceinleger"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mcite)
+msgid "Multiple items in a single citation"
msgstr ""
-#. summary(texlive-texliveonfly)
-msgid "On-the-fly download of missing TeX live packages"
+#. description(texlive-specs-o:texlive-mcite)
+msgid ""
+"The mcite package allows the user to collapse multiple citations into one, as is customary in physics journals. The package requires a customised BibTeX style for its work; the documentation explains how to do that customisation.\n"
+"\n"
+"date: 2012-05-10 14:56:05 +0000"
msgstr ""
-#. summary(texlive-specs-a)
-msgid "One spec file for all TeX Live packages"
+#. summary(texlive-specs-o:texlive-mcite-doc)
+#, fuzzy
+msgid "Documentation for texlive-mcite"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-o:texlive-mcite-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mcite"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mciteplus)
+msgid "Enhanced multiple citations"
msgstr ""
-#. description(texlive-opensans)
+#. description(texlive-specs-o:texlive-mciteplus)
msgid ""
-"Open Sans is a humanist sans serif typeface designed by Steve Matteson; the font is available from the Google Font Directory as TrueType files licensed under the Apache License version 2.0. The package provides support for this font family in LaTeX. It includes the original TrueType fonts, as well as Type 1 versions, converted for this package using FontForge for full support with dvips\n"
+"The mciteplus LaTeX package is an enhanced reimplementation of Thorsten Ohl's mcite package which provides support for the grouping of multiple citations together as is often done in physics journals. An extensive set of features provide for other applications such as reference sublisting.\n"
"\n"
-"date: 2011-11-30 17:37:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(ws-jaxme)
-msgid "Open source implementation of JAXB"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mciteplus-doc)
+#, fuzzy
+msgid "Documentation for texlive-mciteplus"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-stix)
-msgid "OpenType Unicode maths fonts"
+#. description(texlive-specs-o:texlive-mciteplus-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mciteplus"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mdframed)
+msgid "Framed environments that can split at page boundaries"
msgstr ""
-#. summary(texlive-luaotfload)
-msgid "OpenType layout system for Plain TeX and LaTeX"
+#. description(texlive-specs-o:texlive-mdframed)
+msgid ""
+"The package develops the facilities of framed in providing breakable framed and coloured boxes. The user may instruct the package to perform its operations using default LaTeX commands, PStricks or TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lm-math)
+#. summary(texlive-specs-o:texlive-mdframed-doc)
#, fuzzy
-msgid "OpenType maths fonts for Latin Modern"
-msgstr "Zpracování témat pro GTK+"
+msgid "Documentation for texlive-mdframed"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-punknova)
-msgid "OpenType version of Knuth's Punk font"
-msgstr ""
+#. description(texlive-specs-o:texlive-mdframed-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mdframed"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ot-tableau)
-msgid "Optimality Theory tableaux in LaTeX"
+#. summary(texlive-specs-o:texlive-mdputu)
+msgid "Upright digits in Adobe Utopia Italic"
msgstr ""
-#. description(texlive-optional)
+#. description(texlive-specs-o:texlive-mdputu)
msgid ""
-"Optional provides simple, flexible, optional compilation of LaTeX documents. Option switches may be given via package options, by the \\UseOption command, or interactively via the \\AskOption command (help text may be provided, by defining the \\ExplainOptions command). The package is not robust, in the way that comment package is, against ill-behaved text. In particular, verbatim text may not be directly included in optional sections (whether they're included or not).\n"
+"The Annals of Mathematics uses italics for theorems. However, slanted digits and parentheses look disturbing when surrounded by (upright) mathematics. This package provides virtual fonts with italics and upright digits and punctuation, as an extension to Mathdesign's Utopia bundle.\n"
"\n"
-"date: 2010-05-11 10:50:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(vegastrike-speech)
+#. summary(texlive-specs-o:texlive-mdputu-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-mdputu"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mdputu-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mdputu"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mdsymbol)
+msgid "Symbol fonts to match Adobe Myriad Pro"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-mdsymbol)
msgid ""
-"Optional speech files, so you can hear characters speak, for Vega Strike, a GPL 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt.\n"
+"The package provides a font of mathematical symbols, MyriadPro The font is designed as a companion to Adobe Myriad Pro, but it might also fit well with other contemporary typefaces.\n"
"\n"
-"This package is not required to play Vega Strike."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-versions)
-msgid "Optionally omit pieces of text"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mdsymbol-doc)
+#, fuzzy
+msgid "Documentation for texlive-mdsymbol"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-threadcol)
-msgid "Organize document columns into PDF \"article thread\""
-msgstr ""
+#. description(texlive-specs-o:texlive-mdsymbol-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mdsymbol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(vim-plugins:vim-plugin-project)
-msgid "Organize/Navigate projects of files"
+#. summary(texlive-specs-o:texlive-mdsymbol-fonts)
+msgid "Severed fonts for texlive-mdsymbol"
msgstr ""
-#. summary(texlive-papercdcase)
-msgid "Origami-style folding paper CD case"
+#. description(texlive-specs-o:texlive-mdsymbol-fonts)
+msgid "The separated fonts package for texlive-mdsymbol"
msgstr ""
-#. summary(texlive-web)
-msgid "Original web programs tangle and weave"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mdwtools)
+#, fuzzy
+msgid "Miscellaneous tools by Mark Wooding"
+msgstr "Různé"
-#. summary(texlive-pst-osci)
-msgid "Oscgons with PSTricks"
+#. description(texlive-specs-o:texlive-mdwtools)
+msgid ""
+"This collection of tools includes: support for short commands starting with @, macros to sanitise the OT1 encoding of the cmtt fonts; a 'do after' command; improved footnote support; mathenv for various alignment in maths; list handling; mdwmath which adds some minor changes to LaTeX maths; a rewrite of LaTeX's tabular and array environments; verbatim handling; and syntax diagrams.\n"
+"\n"
+"date: 2014-01-08 16:29:10 +0000"
msgstr ""
-#. summary(texlive-mathabx-type1)
+#. summary(texlive-specs-o:texlive-mdwtools-doc)
#, fuzzy
-#| msgid "Unicode Version of the Computer Modern Fonts"
-msgid "Outline version of the mathabx fonts"
-msgstr "Unicode verze písem Computer Modern"
+msgid "Documentation for texlive-mdwtools"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-undolabl)
-msgid "Override existing labels"
-msgstr ""
+#. description(texlive-specs-o:texlive-mdwtools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mdwtools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ocg-p)
-msgid "PDF OCG support in LaTeX"
+#. summary(texlive-specs-o:texlive-media9)
+msgid "Multimedia inclusion package with Adobe Reader-9/X compatibility"
msgstr ""
-#. summary(texlive-lapdf)
-msgid "PDF drawing directly in TeX documents"
+#. description(texlive-specs-o:texlive-media9)
+msgid ""
+"The package provides an interface to embed interactive Flash (SWF) and 3D objects (Adobe U3D & PRC), as well as video and sound files or streams in the popular MP4, FLV and MP3 formats into PDF documents with Acrobat-9/X compatibility. Playback of multimedia files uses the built-in Flash Player of Adobe Reader and does, therefore, not depend on external plug-ins. Flash Player supports the efficient H.264 codec for video compression. The package is based on the RichMedia Annotation, an Adobe addition to the PDF specification. It replaces the now obsolete movie15 package.\n"
+"\n"
+"date: 2014-03-25 19:14:30 +0000"
msgstr ""
-#. summary(texlive-navigator)
-msgid "PDF features across formats and engines"
+#. summary(texlive-specs-o:texlive-media9-doc)
+#, fuzzy
+msgid "Documentation for texlive-media9"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-media9-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-media9"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-meetingmins)
+msgid "Format written minutes of meetings"
msgstr ""
-#. summary(texlive-pdftools)
-msgid "PDF-related utilities, including PostScript-to-PDF conversion"
+#. description(texlive-specs-o:texlive-meetingmins)
+msgid ""
+"The class allows formatting of meeting minutes using \\section commands (which provide hierarchical structure). An agenda can also be produced for distribution prior to the meeting, with user-selected portions suppressed from printing.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pdfx)
-msgid "PDF/X-1a and PDF/A-1b support for pdfTeX"
+#. summary(texlive-specs-o:texlive-meetingmins-doc)
+#, fuzzy
+msgid "Documentation for texlive-meetingmins"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-meetingmins-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-meetingmins"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-memdesign)
+msgid "Notes on book design"
msgstr ""
-#. description(texlive-pgf)
+#. description(texlive-specs-o:texlive-memdesign)
msgid ""
-"PGF is a macro package for creating graphics. It is platform- and format-independent and works together with the most important TeX backend drivers, including pdftex and dvips. It comes with a user-friendly syntax layer called TikZ. Its usage is similar to pstricks and the standard picture environment. PGF works with plain (pdf-)TeX, (pdf-)LaTeX, and ConTeXt. Unlike pstricks, it can produce either PostScript or PDF output.\n"
+"\"A Few Notes on Book Design\" provides an introduction to the business of book design. It is an extended version of what used to be the first part of the memoir users' manual. Please note that the compiled copy, supplied in the package, uses commercial fonts; the README file contains instructions on how to compile the document without these fonts.\n"
"\n"
-"date: 2010-10-27 10:56:09 +0000"
+"date: 2014-05-20 17:24:27 +0000"
msgstr ""
-#. summary(texlive-pgf-blur)
-msgid "PGF/TikZ package for \"blurred\" shadows"
+#. summary(texlive-specs-o:texlive-memexsupp)
+msgid "Experimental memoir support"
msgstr ""
-#. description(texlive-pgfplots)
+#. description(texlive-specs-o:texlive-memexsupp)
msgid ""
-"PGFPlots draws high-quality function plots in normal or logarithmic scaling with a user-friendly interface directly in TeX. The user supplies axis labels, legend entries and the plot coordinates for one or more plots and PGFPlots applies axis scaling, computes any logarithms and axis ticks and draws the plots, supporting line plots, scatter plots, piecewise constant plots, bar plots, area plots, mesh-- and surface plots and some more. Pgfplots is based on PGF/TikZ (pgf); it runs equally for LaTeX/TeX/ConTeXt.\n"
+"A package of code proposed as supporting material for memoir. The package is intended as a test bed for such code, which may in the fullness of time be adopted into the main memoir release.\n"
"\n"
-"date: 2012-10-26 13:30:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pmx)
+#. summary(texlive-specs-o:texlive-memexsupp-doc)
+#, fuzzy
+msgid "Documentation for texlive-memexsupp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-memexsupp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-memexsupp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-memoir)
+msgid "Typeset fiction, non-fiction and mathematical books"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-memoir)
msgid ""
-"PMX is a preprocessor for MusiXTeX. It builds the TeX input file from a file in a much simpler language, making most of the layout decisions by itself. An auxiliary program makes single- player parts from a multi-player score. For proof-listening, PMX can make a MIDI file of your score. The present version requires at least version 1.15 of MusiXTeX, running on an e- tex-enhanced TeX system.\n"
+"The memoir class is for typesetting poetry, fiction, non- fiction, and mathematical works. Permissible document 'base' font sizes range from 9 to 60pt. There is a range of page- styles and well over a dozen chapter-styles to choose from, as well as methods for specifying your own layouts and designs. The class also provides the functionality of over thirty of the more popular packages, thus simplifying document sources. The class automatically loads an associated patch file mempatch; the patch file may be updated from time to time, between releases of the class itself. (The patch file stays around even when there are no extant patches.) Users who wish to use the hyperref package, in a document written with the memoir class, should also use the memhfixc package (part of this bundle). Note, however, that current versions of hyperref actually load the package automatically if they detect that they are running under memoir.\n"
"\n"
-"date: 2013-04-16 16:37:23 +0000"
+"date: 2013-10-30 12:49:16 +0000"
msgstr ""
-#. description(texlive-psizzl)
+#. summary(texlive-specs-o:texlive-memoir-doc)
+#, fuzzy
+msgid "Documentation for texlive-memoir"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-memoir-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-memoir"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-memory)
+#, fuzzy
+msgid "Containers for data in LaTeX"
+msgstr "Software pro certifikaci CD"
+
+#. description(texlive-specs-o:texlive-memory)
msgid ""
-"PSIZZL is a TeX format for physics papers written at SLAC and used at several other places. It dates from rather early in the development of TeX82; as a result, some of the descriptions of limitations look rather quaint to modern eyes.\n"
+"The package allows the user to declare single object or array containers.\n"
"\n"
-"date: 2006-12-03 00:48:16 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pstricks-examples)
-msgid "PSTricks examples"
-msgstr ""
+#. summary(texlive-specs-o:texlive-memory-doc)
+#, fuzzy
+msgid "Documentation for texlive-memory"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-vaucanson-g)
-msgid "PSTricks macros for drawing automata"
-msgstr ""
+#. description(texlive-specs-o:texlive-memory-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-memory"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-blur)
-msgid "PSTricks package for \"blurred\" shadows"
+#. summary(texlive-specs-o:texlive-mentis)
+msgid "A basis for books to be published by Mentis publishers"
msgstr ""
-#. summary(texlive-pst-knot)
-msgid "PSTricks package for displaying knots"
+#. description(texlive-specs-o:texlive-mentis)
+msgid ""
+"This LaTeX class loads scrbook and provides changes necessary for publishing at Mentis publishers in Paderborn, Germany. It is not an official Mentis class, merely one developed by an author in close co-operation with Mentis.\n"
+"\n"
+"date: 2013-10-30 12:49:16 +0000"
msgstr ""
-#. summary(texlive-pst-circ)
-msgid "PSTricks package for drawing electric circuits"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mentis-doc)
+#, fuzzy
+msgid "Documentation for texlive-mentis"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-func)
-msgid "PSTricks package for plotting mathematical functions"
-msgstr ""
+#. description(texlive-specs-o:texlive-mentis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mentis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-psfrag-italian)
-msgid "PSfrag documentation in Italian"
-msgstr ""
+#. summary(texlive-specs-o:texlive-menu)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typesetting menus"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-psfragx)
+#. description(texlive-specs-o:texlive-menu)
msgid ""
-"PSfragX offers a mechanism to embed \\psfrag commands, as provided by the psfrag package, into the EPS file itself. Each time a graphic is included, the EPS file is scanned. If some tagged lines are found, they are used to define the psfrag replacements that should be performed automatically. In addition, a similar mechanism holds for overpic objects. These are picture objects superimposed on the included graphic. A similar mechanism is implemented in psfrag itself (but deprecated in the documentation), but psfragx offers much more flexibility. For example, if babel is used, it is possible to define different replacements corresponding to different languages. The replacements to take into account will be selected on the basis of the current language of the document. A Matlab script (LaPrint) is provided, to export an EPS file with psfragx annotations ready embedded.\n"
+"The package defines command \\menu which assists typesetting of a path through a program's menu.\n"
"\n"
-"date: 2012-05-07 18:30:54 +0000"
+"date: 2012-06-01 14:21:41 +0000"
msgstr ""
-#. summary(texlive-pst-tools)
-msgid "PStricks support functions"
+#. summary(texlive-specs-o:texlive-menu-doc)
+#, fuzzy
+msgid "Documentation for texlive-menu"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-menu-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-menu"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-menukeys)
+msgid "Format menu sequences, paths and keystrokes from lists"
msgstr ""
-#. description(texlive-ptex)
+#. description(texlive-specs-o:texlive-menukeys)
msgid ""
-"PTeX adds features related to vertical writing, and deals with other problems in typesetting Japanese. A set of additions to a TEXMF tree, for use with PTeX, may be found in package PTeX- texmf. PTeX is distributed as WEB change files.\n"
+"The package allows easy input and formatting of menu sequences, using menus set with commands such as \\menu{Extras > Settings > General}, paths using a command like \\path{macros/latex/contrib/menukeys} and short cuts such as \\keys{\\ctrl + C}. The output is highly configurable by providing different styles and colour themes.\n"
"\n"
-"date: 2011-11-09 14:33:34 +0000"
+"date: 2014-03-10 07:48:40 +0000"
msgstr ""
-#. description(texlive-pacioli)
+#. summary(texlive-specs-o:texlive-menukeys-doc)
+#, fuzzy
+msgid "Documentation for texlive-menukeys"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-menukeys-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-menukeys"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-merriweather)
+msgid "Merriweather and MerriweatherSans fonts, with LaTeX support"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-merriweather)
msgid ""
-"Pacioli was a c.15 mathematician, and his font was designed according to 'the divine proportion'. The font is uppercase letters together with punctuation and some analphabetics; no lowercase or digits. The Metafont source is distributed in a .dtx file, together with LaTeX support.\n"
+"Merriweather features a very large x height, slightly condensed letterforms, a mild diagonal stress, sturdy serifs and open forms. The Sans family closely harmonizes with the weights and styles of the serif family. There are four weights and italics for each.\n"
"\n"
-"date: 2011-06-16 19:20:53 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-savetrees)
-msgid "Pack as much as possible onto each page of a LaTeX document"
-msgstr ""
+#. summary(texlive-specs-o:texlive-merriweather-doc)
+#, fuzzy
+msgid "Documentation for texlive-merriweather"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nlctdoc)
+#. description(texlive-specs-o:texlive-merriweather-doc)
#, fuzzy
-msgid "Package documentation class"
+msgid "This package includes the documentation for texlive-merriweather"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texshade)
+#. summary(texlive-specs-o:texlive-merriweather-fonts)
#, fuzzy
-msgid "Package for setting nucleotide and peptide alignments"
-msgstr "Perlový modul pro vytváření a zpracování tar souborů"
+msgid "Severed fonts for texlive-merriweather"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-subeqn)
-msgid "Package for subequation numbering"
+#. description(texlive-specs-o:texlive-merriweather-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-merriweather"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-o:texlive-metafont)
+msgid "A system for specifying fonts"
msgstr ""
-#. summary(update-test-trival:update-test-affects-package-manager)
-msgid "Package for testing the update stack during product development."
-msgstr "Balík pro testování aktualizací během vývoje produktu."
-
-#. description(update-test-trival:update-test-affects-package-manager)
+#. description(texlive-specs-o:texlive-metafont)
msgid ""
-"Package for testing the update stack during product development.\n"
+"The program takes a semi-algorithmic specification of a font, and produces a bitmap font (whose properties are defined by a set of parameters of the target device), and a set metrics for use by TeX. The bitmap output may be converted into a format directly usable by a device driver, etc., by the tools provided in the parallel mfware distribution. (Third parties have developed tools to convert the bitmap output to outline fonts.) The distribution includes the source of Knuth's Metafont book; this source is there to read, as an example of writing TeX -- it should not be processed without Knuth's direct permission.\n"
"\n"
-"We will provide a \"always\" working update for this package so that the update stack could be easily tested."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-"Balík pro testování aktualizací během vývoje produktu.\n"
-"\n"
-"Vždy bude k dispozici funkční aktualizace tohoto balíku pro snadné testování aktualizačního systému."
-#. summary(texlive-mathexam)
-msgid "Package for typesetting exams"
+#. summary(texlive-specs-o:texlive-metafont-beginners)
+msgid "An introductory tutorial for Metafont"
msgstr ""
-#. summary(texlive-songbook)
-msgid "Package for typesetting song lyrics and chord books"
+#. description(texlive-specs-o:texlive-metafont-beginners)
+msgid ""
+"An old introduction to the use of Metafont, that has stood the test of time. It focuses on using the program, rather than designing fonts, but does offer advice about understanding errors in other people's fonts.\n"
+"\n"
+"date: 2012-05-23 14:10:32 +0000"
msgstr ""
-#. summary(texlive-ulem)
-msgid "Package for underlining"
-msgstr ""
+#. summary(texlive-specs-o:texlive-metafont-doc)
+#, fuzzy
+msgid "Documentation for texlive-metafont"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-psu-thesis)
-msgid "Package for writing a thesis at Penn State University"
+#. description(texlive-specs-o:texlive-metafont-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metafont"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-metago)
+msgid "MetaPost output of Go positions"
msgstr ""
-#. description(texlive-rviewport)
+#. description(texlive-specs-o:texlive-metago)
msgid ""
-"Package graphicx provides a useful keyword viewport which allows to show just a part of an image. However, one needs to put there the actual coordinates of the viewport window. Sometimes it is useful to have relative coordinates as fractions of natural size. For example, one may want to print a large image on a spread, putting a half on a verso page, and another half on the next recto page. For this one would need a viewport occupying exactly one half of the file's bounding box, whatever the actual width of the image may be. This package adds a new keyword rviewport to the graphicx package specifiying Relative Viewport for graphics inclusion: a window defined by the given fractions of the natural width and height of the image.\n"
+"The package allows you to draw Go game positions with MetaPost. Two methods of usage are provided, either using the package programmatically, or using the package via a script (which may produce several images).\n"
"\n"
-"date: 2011-08-28 15:37:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ifoddpage)
-msgid "Package ifoddpage"
-msgstr "Balíček ifoddpage"
+#. summary(texlive-specs-o:texlive-metago-doc)
+#, fuzzy
+msgid "Documentation for texlive-metago"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-jmn)
-msgid "Package jmn"
-msgstr "Balíček jmn"
+#. description(texlive-specs-o:texlive-metago-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metago"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-kastrup)
-msgid "Package kastrup"
-msgstr "Balíček kastrup"
+#. summary(texlive-specs-o:texlive-metalogo)
+#, fuzzy
+#| msgid "Extended Clipboard"
+msgid "Extended TeX logo macros"
+msgstr "Rozšířená schránka"
-#. summary(texlive-kluwer)
-msgid "Package kluwer"
-msgstr "Balíček kluwer"
+#. description(texlive-specs-o:texlive-metalogo)
+msgid ""
+"This package exposes spacing parameters for various TeX logos to the end user, to optimise the logos for different fonts. Written especially for XeLaTeX users.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. summary(texlive-knuthotherfonts)
-msgid "Package knuthotherfonts"
-msgstr "Balíček knuthotherfonts"
+#. summary(texlive-specs-o:texlive-metalogo-doc)
+#, fuzzy
+msgid "Documentation for texlive-metalogo"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ksfh_nat)
-msgid "Package ksfh_nat"
-msgstr "Balíček ksfh_nat"
+#. description(texlive-specs-o:texlive-metalogo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metalogo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lambda)
-msgid "Package lambda"
-msgstr "Balíček lambda"
+#. summary(texlive-specs-o:texlive-metaobj)
+msgid "MetaPost package providing high-level objects"
+msgstr ""
-#. summary(texlive-langcode)
+#. description(texlive-specs-o:texlive-metaobj)
+msgid ""
+"METAOBJ is a large metapost package providing high-level objects. It implements many of PSTricks' features for node connections, but also trees, matrices, and many other things. It more or less contains boxes.mp and rboxes.mp. There is a large (albeit not complete) documentation distributed with the package. It is easily extensible with new objects.\n"
+"\n"
+"date: 2012-05-23 14:10:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-o:texlive-metaobj-doc)
#, fuzzy
-#| msgid "JPackage Utilities"
-msgid "Package langcode"
-msgstr "JPackage nástroje"
+msgid "Documentation for texlive-metaobj"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-latex2e-help-texinfo-spanish)
-msgid "Package latex2e-help-texinfo-spanish"
-msgstr "Balíček latex2e-help-texinfo-spanish"
+#. description(texlive-specs-o:texlive-metaobj-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metaobj"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-latex4wp-it)
-msgid "Package latex4wp-it"
-msgstr "Balíček latex4wp-it"
+#. summary(texlive-specs-o:texlive-metaplot)
+msgid "Plot-manipulation macros for use in Metapost"
+msgstr ""
-#. summary(texlive-latexconfig)
-msgid "Package latexconfig"
-msgstr "Balíček latexconfig"
+#. description(texlive-specs-o:texlive-metaplot)
+msgid ""
+"MetaPlot is a set of Metapost macros for manipulating pre- generated plots (and similar objects), and formatting them for inclusion in a Metapost figure. The intent is that the plots can be generated by some outside program, in an abstract manner that does not require making decisions about on-page sizing and layout, and then they can be imported into MetaPlot and arranged using the full capabilities of Metapost. Metaplot also includes a very flexible set of macros for generating plot axes, which may be useful in other contexts as well. Presently, MetaPlot is in something of a pre-release beta state; it is quite functional, but the syntax of the commands is still potentially in flux.\n"
+"\n"
+"date: 2012-08-30 20:47:45 +0000"
+msgstr ""
-#. summary(texlive-leipzig)
+#. summary(texlive-specs-o:texlive-metaplot-doc)
#, fuzzy
-msgid "Package leipzig"
-msgstr "Balík"
+msgid "Documentation for texlive-metaplot"
+msgstr "Dokumentace pro adaptx"
-#. summary(whohas)
-msgid "Package list querying tool"
-msgstr ""
+#. description(texlive-specs-o:texlive-metaplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metaplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luabidi)
+#. summary(texlive-specs-o:texlive-metapost)
#, fuzzy
-#| msgid "Package lambda"
-msgid "Package luabidi"
-msgstr "Balíček lambda"
+#| msgid "Development environment for cairo"
+msgid "A development of Metafont for creating graphics"
+msgstr "Vývojové prostředí pro cairo"
-#. summary(texlive-misc)
-msgid "Package misc"
-msgstr "Balíček misc"
+#. description(texlive-specs-o:texlive-metapost)
+msgid ""
+"MetaPost uses a language based on that of Metafont to produce precise technical illustrations. Its output is scalable PostScript or SVG, rather than the bitmaps Metafont creates.\n"
+"\n"
+"date: 2013-06-20 16:08:19 +0000"
+msgstr ""
-#. summary(texlive-misc209)
-msgid "Package misc209"
-msgstr "Balíček misc209"
+#. summary(texlive-specs-o:texlive-metapost-doc)
+#, fuzzy
+msgid "Documentation for texlive-metapost"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-multienv)
+#. description(texlive-specs-o:texlive-metapost-doc)
#, fuzzy
-msgid "Package multienv"
-msgstr "Balík"
+msgid "This package includes the documentation for texlive-metapost"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ntheorem-vn)
-msgid "Package ntheorem-vn"
-msgstr "Balíček ntheorem-vn"
+#. summary(texlive-specs-o:texlive-metapost-examples)
+msgid "Example drawings using MetaPost"
+msgstr ""
-#. summary(texlive-numberedblock)
-msgid "Package numberedblock"
+#. description(texlive-specs-o:texlive-metapost-examples)
+msgid ""
+"These are a few (hundred) example pictures drawn with MetaPost, ranging from very simple (lines and circles) to rather intricate (uncommon geometric transformations, fractals, bitmap, etc).\n"
+"\n"
+"date: 2012-05-28 10:27:21 +0000"
msgstr ""
-#. summary(texlive-omegaware)
-msgid "Package omegaware"
-msgstr "Balíček omegaware"
+#. summary(texlive-specs-o:texlive-metapost-fonts)
+msgid "Severed fonts for texlive-metapost"
+msgstr ""
-#. summary(texlive-otibet)
-msgid "Package otibet"
-msgstr "Balíček otibet"
+#. description(texlive-specs-o:texlive-metapost-fonts)
+msgid "The separated fonts package for texlive-metapost"
+msgstr ""
-#. summary(texlive-pdfwin)
-msgid "Package pdfwin"
-msgstr "Balíček pdfwin"
-
-#. summary(texlive-plain)
-msgid "Package plain"
+#. summary(texlive-specs-o:texlive-metatex)
+msgid "Incorporate Metafont pictures in TeX source"
msgstr ""
-#. summary(texlive-plainpkg)
-msgid "Package plainpkg"
+#. description(texlive-specs-o:texlive-metatex)
+msgid ""
+"METATeX is a set of plain TeX and Metafont macros that you can use to define both the text and the figures in a single source file. Because METATeX sets up two way communication, from TeX to Metafont and back from Metafont to TeX, drawing dimensions can be controlled by TeX and labels can be located by Metafont. Only standard features of TeX and Metafont are used, but two runs of TeX and one of Metafont are needed.\n"
+"\n"
+"date: 2012-07-06 15:29:31 +0000"
msgstr ""
-#. summary(texlive-pst-ghsb)
-msgid "Package pst-ghsb"
-msgstr "Balíček pst-ghsb"
+#. summary(texlive-specs-o:texlive-metatex-doc)
+#, fuzzy
+msgid "Documentation for texlive-metatex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pstricks_calcnotes)
-msgid "Package pstricks_calcnotes"
-msgstr "Balíček pstricks_calcnotes"
+#. description(texlive-specs-o:texlive-metatex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metatex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pxcjkcat)
-msgid "Package pxcjkcat"
+#. summary(texlive-specs-o:texlive-metauml)
+msgid "MetaPost library for typesetting UML diagrams"
msgstr ""
-#. summary(texlive-pxrubrica)
-msgid "Package pxrubrica"
+#. description(texlive-specs-o:texlive-metauml)
+msgid ""
+"MetaUML is a MetaPost library for typesetting UML diagrams, which provides a usable, human-friendly textual notation for UML, offering now support for class, package, activity, state, and use case diagrams.\n"
+"\n"
+"date: 2013-10-11 09:29:19 +0000"
msgstr ""
-#. summary(texlive-qpxqtx)
-msgid "Package qpxqtx"
-msgstr "Balíček qpxqtx"
+#. summary(texlive-specs-o:texlive-metauml-doc)
+#, fuzzy
+msgid "Documentation for texlive-metauml"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ran_toks)
-msgid "Package ran_toks"
+#. description(texlive-specs-o:texlive-metauml-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metauml"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-method)
+msgid "Typeset method and variable declarations"
msgstr ""
-#. summary(texlive-revtex4)
-msgid "Package revtex4"
-msgstr "Balíček revtex4"
+#. description(texlive-specs-o:texlive-method)
+msgid ""
+"The package supports typesetting of programming language method and variable declarations. It supports declarations in German, French and English.\n"
+"\n"
+"date: 2013-10-03 12:20:59 +0000"
+msgstr ""
-#. summary(texlive-rjlparshap)
-msgid "Package rjlparshap"
-msgstr "Balíček rjlparshap"
+#. summary(texlive-specs-o:texlive-method-doc)
+#, fuzzy
+msgid "Documentation for texlive-method"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-roex)
-msgid "Package roex"
-msgstr "Balíček roex"
+#. description(texlive-specs-o:texlive-method-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-method"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-serbian-def-cyr)
-msgid "Package serbian-def-cyr"
-msgstr "Balíček serbian-def-cyr"
+#. summary(texlive-specs-o:texlive-metre)
+msgid "Support for the work of classicists"
+msgstr ""
-#. summary(texlive-srbook-mem)
-msgid "Package srbook-mem"
-msgstr "Balíček srbook-mem"
-
-#. summary(texlive-subfiles)
-msgid "Package subfiles"
+#. description(texlive-specs-o:texlive-metre)
+msgid ""
+"The package provides classicists with some of the tools that are needed for typesetting scholarly publications dealing with Greek and Latin texts, with special emphasis on Greek verse. As the package's name suggests, its core is a comprehensive set of commands for generating metrical schemes and for placing prosodical marks on text set in the Latin or the Greek alphabet. The rest of the package provides a miscellany of commands for symbols (most of them not directly related to metre) that are often used in critical editions of classical texts. The package does not require any special font: all symbols are taken from the Computer Modern fonts (which are included in all TeX distributions) and the package's commands are based on TeX primitives.\n"
+"\n"
+"date: 2013-09-09 17:04:00 +0000"
msgstr ""
-#. summary(texlive-synctex)
-msgid "Package synctex"
-msgstr "Balíček synctex"
+#. summary(texlive-specs-o:texlive-metre-doc)
+#, fuzzy
+msgid "Documentation for texlive-metre"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tex-virtual-academy-pl)
-msgid "Package tex-virtual-academy-pl"
-msgstr "Balíček tex-virtual-academy-pl"
+#. description(texlive-specs-o:texlive-metre-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metre"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texconfig)
-msgid "Package texconfig"
-msgstr "Balíček texconfig"
-
-#. summary(texlive-textglos)
-msgid "Package textglos"
+#. summary(texlive-specs-o:texlive-metrix)
+msgid "Typeset metric marks for Latin text"
msgstr ""
-#. description(texlive-textfit)
+#. description(texlive-specs-o:texlive-metrix)
msgid ""
-"Package to fit text to a given width or height by scaling the font. For example: \\scaletowidth{3in}{This}. (The job is done by calculating a magstep and applying it to the current font; thus \"This\" will be very tall, as well as very wide; to scale in just one dimension, use the facilities of the graphicx package.)\n"
+"The package may be used to type the prosodics/metrics of (latin) verse; it provides macros to typeset the symbols standing alone, and in combination with symbols, giving automatic alignment. The package requires tikz (including the calc library, and the xparse package (thus also requiring the experimental LaTeX 3 environment).\n"
"\n"
-"date: 2010-11-28 19:21:22 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-SIstyle)
-msgid "Package to typeset SI units, numbers and angles"
-msgstr ""
+#. summary(texlive-specs-o:texlive-metrix-doc)
+#, fuzzy
+msgid "Documentation for texlive-metrix"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-ttfutils)
-msgid "Package ttfutils"
-msgstr "Balíček ttfutils"
+#. description(texlive-specs-o:texlive-metrix-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-metrix"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tugboat-plain)
-msgid "Package tugboat-plain"
+#. summary(texlive-specs-o:texlive-mex)
+#, fuzzy
+#| msgid "Polish Translations for KDE"
+msgid "Polish formats for TeX"
+msgstr "Polské překlady pro KDE"
+
+#. description(texlive-specs-o:texlive-mex)
+msgid ""
+"MeX is an adaptation of Plain TeX (MeX) and LaTeX209 (LaMeX) formats to the Polish language and to Polish printing customs. It contains a complete set of Metafont sources of Polish fonts, hyphenation rules for the Polish language and sources of formats.\n"
+"\n"
+"date: 2012-04-30 14:45:41 +0000"
msgstr ""
-#. summary(texlive-uni-wtal-ger)
-msgid "Package uni-wtal-ger"
-msgstr "Balíček uni-wtal-ger"
+#. summary(texlive-specs-o:texlive-mex-doc)
+#, fuzzy
+msgid "Documentation for texlive-mex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-upca)
-msgid "Package upca"
-msgstr "Balíček upca"
+#. description(texlive-specs-o:texlive-mex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-uri)
-msgid "Package uri"
-msgstr "Balíček uri"
+#. summary(texlive-specs-o:texlive-mf2pt1)
+#, fuzzy
+#| msgid "Scalable PostScript Fonts for MetaFont"
+msgid "Produce PostScript Type 1 fonts from Metafont source"
+msgstr "Vektorová PostScriptová písma pro MetaFont"
-#. summary(texlive-utf8mex)
-msgid "Package utf8mex"
-msgstr "Balíček utf8mex"
+#. description(texlive-specs-o:texlive-mf2pt1)
+msgid ""
+"mf2pt1 facilitates producing PostScript Type 1 fonts from a Metafont source file. It is not, as the name may imply, an automatic converter of arbitrary Metafont fonts to Type 1 format. mf2pt1 imposes a number of restrictions on the Metafont input. If these restrictions are met, mf2pt1 will produce valid Type 1 output with more accurate control points than can be reverse-engineered by TeXtrace, mftrace, and other programs which convert bitmaps to outline fonts.\n"
+"\n"
+"date: 2014-05-02 04:53:00 +0000"
+msgstr ""
-#. summary(texlive-vlna)
-msgid "Package vlna"
-msgstr "Balíček vlna"
+#. summary(texlive-specs-o:texlive-mf2pt1-doc)
+#, fuzzy
+msgid "Documentation for texlive-mf2pt1"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-voss-de)
-msgid "Package voss-de"
-msgstr "Balíček voss-de"
+#. description(texlive-specs-o:texlive-mf2pt1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mf2pt1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xbmc)
-msgid "Package xbmc"
-msgstr "Balíček xbmc"
+#. summary(texlive-specs-o:texlive-mflogo)
+#, fuzzy
+msgid "LaTeX support for Metafont logo fonts"
+msgstr "XML podpora pro castor"
-#. summary(texlive-xetexko)
-msgid "Package xetexko"
+#. description(texlive-specs-o:texlive-mflogo)
+msgid ""
+"LaTeX package and font definition file to access the Knuthian mflogo fonts described in 'The Metafontbook' and to typeset Metafont logos in LaTeX documents.\n"
+"\n"
+"date: 2012-06-24 09:08:44 +0000"
msgstr ""
-#. summary(texlive-xpunctuate)
-msgid "Package xpunctuate"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mflogo-doc)
+#, fuzzy
+msgid "Documentation for texlive-mflogo"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xypic)
-msgid "Package xypic"
-msgstr ""
+#. description(texlive-specs-o:texlive-mflogo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mflogo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-zxjafbfont)
-msgid "Package zxjafbfont"
+#. summary(texlive-specs-o:texlive-mflogo-fonts)
+msgid "Severed fonts for texlive-mflogo"
msgstr ""
-#. summary(texlive-mwe)
-msgid "Packages and image files for MWEs"
+#. description(texlive-specs-o:texlive-mflogo-fonts)
+msgid "The separated fonts package for texlive-mflogo"
msgstr ""
-#. summary(texlive-logical-markup-utils)
-msgid "Packages for language-dependent inline quotes and dashes"
+#. summary(texlive-specs-o:texlive-mfnfss)
+msgid "Packages to typeset oldgerman and pandora fonts in LaTeX"
msgstr ""
-#. description(texlive-passivetex)
+#. description(texlive-specs-o:texlive-mfnfss)
msgid ""
-"Packages providing XML parsing, UTF-8 parsing, Unicode entities, and common formatting object definitions for jadetex.\n"
+"This bundle contains two packages: - oldgerm, a package to typeset with old german fonts designed by Yannis Haralambous. - pandora, a package to typeset with Pandora fonts designed by Neena Billawala. Note that support for the Pandora fonts is also available via the pandora-latex package.\n"
"\n"
-"date: 2008-04-20 17:53:04 +0000"
+"date: 2012-05-25 14:20:41 +0000"
msgstr ""
-#. summary(texlive-mfnfss)
-msgid "Packages to typeset oldgerman and pandora fonts in LaTeX"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mfnfss-doc)
+#, fuzzy
+msgid "Documentation for texlive-mfnfss"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-zwpagelayout)
-msgid "Page layout and crop-marks"
-msgstr ""
+#. description(texlive-specs-o:texlive-mfnfss-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mfnfss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-layout)
-msgid "Page layout macros based on PStricks packages"
+#. summary(texlive-specs-o:texlive-mfpic)
+msgid "Draw Metafont/post pictures from (La)TeX commands"
msgstr ""
-#. summary(texlive-pagecont)
-msgid "Page numbering that continues between documents"
+#. description(texlive-specs-o:texlive-mfpic)
+msgid ""
+"Mfpic is a scheme for producing pictures from (La)TeX commands. Commands \\mfpic and \\endmfpic (in LaTeX, the mfpic environment) enclose a group in which drawing commands may be placed. The commands generate a Meta-language file, which may be processed by Metapost (or even Metafont). The resulting image file will be read back in to the document to place the picture at the point where the original (La)TeX commands appeared. Note that the ability to use Metapost here means that the package works equally well in LaTeX and PDFLaTeX.\n"
+"\n"
+"date: 2012-12-04 15:44:12 +0000"
msgstr ""
-#. summary(texlive-pxfonts)
-msgid "Palatino-like fonts in support of mathematics"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mfpic-doc)
+#, fuzzy
+msgid "Documentation for texlive-mfpic"
+msgstr "Dokumentace pro adaptx"
-#. summary(x-tile)
-msgid "Panel applet for tiling windows"
-msgstr ""
+#. description(texlive-specs-o:texlive-mfpic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mfpic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-marginfix)
-msgid "Patch \\marginpar to avoid overfull margins"
+#. summary(texlive-specs-o:texlive-mfpic4ode)
+msgid "Macros to draw direction fields and solutions of ODEs"
msgstr ""
-#. summary(texlive-patch)
-msgid "Patch loaded packages, etcetera"
+#. description(texlive-specs-o:texlive-mfpic4ode)
+msgid ""
+"The package is a small set of macros for drawing direction fields, phase portraits and trajectories of differential equations and two dimensional autonomous systems. The Euler, Runge-Kutta and 4th order Runge-Kutta algorithms are available to solve the ODEs. The picture is translated into mfpic macros and MetaPost is used to create the final drawing. The package is was designed for use with LaTeX, but it can be used in plain TeX as well. Online demonstration of the mfpic4ode macros is available on the Mfpic Previewer as Example 6.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mpattern)
-msgid "Patterns in MetaPost"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mfpic4ode-doc)
+#, fuzzy
+msgid "Documentation for texlive-mfpic4ode"
+msgstr "Dokumentace pro adaptx"
-#. summary(tuxpaint-stamps:tuxpaint-stamps-people)
-msgid "People stamps collection for Tux Paint"
-msgstr ""
+#. description(texlive-specs-o:texlive-mfpic4ode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mfpic4ode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-makedtx)
-msgid "Perl script to help generate dtx and ins files"
+#. summary(texlive-specs-o:texlive-mftinc)
+msgid "Pretty-print Metafont source"
msgstr ""
-#. description(texlive-perltex)
+#. description(texlive-specs-o:texlive-mftinc)
msgid ""
-"PerlTeX is a combination Perl script (perltex.pl) and LaTeX2e package (perltex.sty) that, together, give the user the ability to define LaTeX macros in terms of Perl code. Once defined, a Perl macro becomes indistinguishable from any other LaTeX macro. PerlTeX thereby combines LaTeX's typesetting power with Perl's programmability. PerlTeX will make use of persistent named pipes, and thereby run more efficiently, on operating systems that offer them (mostly Unix-like systems). Also provided is a switch to generate a PerlTeX-free, document- specific, noperltex.sty that is useful when distributing a document to places where PerlTeX is not available.\n"
+"The mft program pretty-prints Metafont source code into a TeX file. The mftinc package facilitates incorporating such files into a LaTeX2e document. In addition, mftinc provides routines for improved comment formatting and for typesetting font tables.\n"
"\n"
-"date: 2012-06-12 16:08:23 +0000"
+"date: 2012-06-24 09:08:44 +0000"
msgstr ""
-#. summary(texlive-tablefootnote)
-msgid "Permit footnotes in tables"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mftinc-doc)
+#, fuzzy
+msgid "Documentation for texlive-mftinc"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lshort-persian)
-msgid "Persian (Farsi) introduction to LaTeX"
+#. description(texlive-specs-o:texlive-mftinc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mftinc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mfware)
+msgid "Supporting tools for use with Metafont"
msgstr ""
-#. summary(texlive-xepersian)
-msgid "Persian for LaTeX, using XeTeX"
+#. description(texlive-specs-o:texlive-mfware)
+msgid ""
+"A collection of programs (as web source) for processing the output of Metafont.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-persian-bib)
+#. summary(texlive-specs-o:texlive-mfware-doc)
#, fuzzy
-msgid "Persian translations of classic BibTeX styles"
-msgstr "Tamilské překlady pro KOffice"
+msgid "Documentation for texlive-mfware"
+msgstr "Dokumentace pro adaptx"
-#. summary(vim-plugins:vim-plugin-vimwiki)
-msgid "Personal wiki for vim"
+#. description(texlive-specs-o:texlive-mfware-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mfware"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mh)
+msgid "The MH bundle"
msgstr ""
-#. description(texlive-petri-nets)
+#. description(texlive-specs-o:texlive-mh)
msgid ""
-"Petri-nets is a set of TeX/LaTeX packages about Petri nets and related models. Three packages are available: - the first allows the user to draw Petri-nets in PostScript documents; - the second defines macros related to PBC, M-nets and B(PN) models; and - the last gathers together the previous two.\n"
+"The mh bundle is a series of packages designed to enhance the appearance of documents containing a lot of math. The main backbone is amsmath, so those unfamiliar with this required part of the LaTeX system will probably not find the packages very useful. Component parts of the bundle are: breqn, empheq, flexisym, mathstyle, mathtools and mhsetup, The empheq package is a visual markup extension of amsmath. Empheq allows sophisticated boxing and other marking of multi-line maths displays, and fixes problems with the way that the ntheorem package places end-of-theorem markers. The mathtools package provides many useful tools for mathematical typesetting. It fixes various deficiencies of amsmath and standard LaTeX. The mhsetup package defines various programming tools needed by both empheq and mathtools. The breqn package makes more easy the business of preparing displayed equations in LaTeX, including permitting automatic line-breaking within displayed equations. (Breqn uses the maths
tyle package to keep track of the current maths typesetting style, something that raw TeX hides from the programmer.)\n"
"\n"
-"date: 2007-01-12 22:55:10 +0000"
+"date: 2014-05-21 15:07:52 +0000"
msgstr ""
-#. description(texlive-philex)
+#. summary(texlive-specs-o:texlive-mh-doc)
+#, fuzzy
+msgid "Documentation for texlive-mh"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mh-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mh"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mhchem)
+msgid "Typeset chemical formulae/equations and Risk and Safety phrases"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-mhchem)
msgid ""
-"Philex provides means for creating and cross-referencing named or numbered environments. Possible uses would be equations, example sentences (as in linguistics or philosophy) or named principles. Cross references may refer either to the number, or to a short name of the target environment, or to the contents of the environment. Philex builds on the facilities of the linguex package.\n"
+"The bundle provides three packages: The mhchem package provides commands for typesetting chemical molecular formulae and equations. The hpstatement package provides commands for the official hazard statements and precautionary statements (H and P statements) that are used to label chemicals. The rsphrase package provides commands for the official Risk and Safety (R and S) Phrases that are used to label chemicals. The package requires the expl3 bundle.\n"
"\n"
-"date: 2012-09-23 09:23:18 +0000"
+"date: 2014-03-28 06:32:42 +0000"
msgstr ""
-#. summary(texlive-teubner)
-msgid "Philological typesetting of classical Greek"
+#. summary(texlive-specs-o:texlive-mhchem-doc)
+#, fuzzy
+msgid "Documentation for texlive-mhchem"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mhchem-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mhchem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mhequ)
+msgid "Multicolumn equations, tags, labels, sub-numbering"
msgstr ""
-#. description(texlive-pictex)
+#. description(texlive-specs-o:texlive-mhequ)
msgid ""
-"PicTeX is an early, and very comprehensive drawing package, that mostly draws by placing myriads of small dots to make up pictures. It has a tendency to run out of space, most especially of allowable dimensions registers; packages m-pictex and pictexwd deal with the register problem, in different ways. Note that full documentation may be bought via the PC-TeX site, though a command summary is available as free software. Alternatively, a front-end package such as mathsPiC, which covers all of PicTeX and has a complete and free manual, could be used.\n"
+"MHequ simplifies creating multi-column equation environments, and tagging the equations therein. It supports sub-numbers of blocks of equations (like (1.2a), (1.2b), etc) and references to each equation individually (1.2a) or to the whole block (1.2). The labels can be shown in draft mode. Comments in the package itself describe usage.\n"
"\n"
-"date: 2011-04-03 14:40:50 +0000"
+"date: 2012-06-24 09:08:44 +0000"
msgstr ""
-#. summary(texlive-pictex)
-msgid "Picture drawing macros for TeX and LaTeX"
+#. summary(texlive-specs-o:texlive-mhequ-doc)
+#, fuzzy
+msgid "Documentation for texlive-mhequ"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mhequ-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mhequ"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-microtype)
+msgid "Subliminal refinements towards typographical perfection"
msgstr ""
-#. description(texlive-pinlabel)
+#. description(texlive-specs-o:texlive-microtype)
msgid ""
-"Pinlabel is a labelling package for attaching perfectly formatted TeX labels to figures and diagrams in both eps and pdf formats. It is suitable both for labelling a new diagram and for relabelling an existing diagram. The package uses coordinates derived from GhostView (or gv) and labels are placed with automatic and consistent spacing relative to the object labelled.\n"
+"The package provides a LaTeX interface to the micro-typographic extensions that were introduced by pdfTeX and have since also propagated to XeTeX and LuaTeX: most prominently, character protrusion and font expansion, furthermore the adjustment of interword spacing and additional kerning, as well as hyphenatable letterspacing (tracking) and the possibility to disable all or selected ligatures. These features may be applied to customisable sets of fonts, and all micro- typographic aspects of the fonts can be configured in a straight-forward and flexible way. Settings for various fonts are provided. Note that character protrusion requires pdfTeX, LuaTeX, or XeTeX. Font expansion works with pdfTeX or LuaTeX. The package will by default enable protrusion and expansion if they can safely be assumed to work. Disabling ligatures requires pdfTeX or LuaTeX, while the adjustment of interword spacing and of kerning only works with pdfTeX. Letterspacing is available with pdfTeX or LuaTeX. The a
lternative package `letterspace', which also works with plain TeX, provides the user commands for letterspacing only, omitting support for all other extensions.\n"
"\n"
-"date: 2011-12-05 17:34:00 +0000"
+"date: 2013-09-30 12:43:32 +0000"
msgstr ""
-#. description(texlive-pkfix-helper)
+#. summary(texlive-specs-o:texlive-microtype-de)
+msgid "Translation into German of the documentation of microtype"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-microtype-de)
msgid ""
-"Pkfix is a useful utility for replacing resolution-dependent bitmapped fonts in a dvips-produced PostScript file with the corresponding resolution-independent vector fonts. Unfortunately, pkfix needs to parse certain PostScript comments that appear only in files produced by dvips versions later than 5.58 (ca. 1996); it fails to work on PostScript files produced by older versions of dvips. Pkfix-helper is a program that attempts to insert newer-dvips comments into an older-dvips PostScript file, thereby making the file suitable for processing by pkfix. pkfix-helper can sometimes process documents fully autonomously but does require the user to verify and, if needed, correct its decisions.\n"
+"The microtype-de package\n"
"\n"
-"date: 2012-06-08 14:04:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tex-label)
-msgid "Place a classification on each page of a document"
-msgstr ""
+#. summary(texlive-specs-o:texlive-microtype-doc)
+#, fuzzy
+msgid "Documentation for texlive-microtype"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-textpos)
-msgid "Place boxes at arbitrary positions on the LaTeX page"
+#. description(texlive-specs-o:texlive-microtype-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-microtype"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-midnight)
+msgid "A set of useful macro tools"
msgstr ""
-#. description(texlive-thumb)
+#. description(texlive-specs-o:texlive-midnight)
msgid ""
-"Place thumb marks in books, manuals and reference maunals.\n"
+"Included are: quire: making booklets, etc.; gloss: vertically align words in consecutive sentences; loop: a looping construct; dolines: 'meta'-macros to separate arguments by newlines; labels: address labels and bulk mail letters; styledef: selectively input part of a file; and border: borders around boxes.\n"
"\n"
-"date: 2006-12-10 23:37:24 +0000"
+"date: 2014-01-08 16:29:10 +0000"
msgstr ""
-#. summary(texlive-texsis)
+#. summary(texlive-specs-o:texlive-midnight-doc)
#, fuzzy
-msgid "Plain TeX macros for Physicists"
-msgstr "TeXová makra pro šachové diagramy"
+msgid "Documentation for texlive-midnight"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-resumemac)
+#. description(texlive-specs-o:texlive-midnight-doc)
#, fuzzy
-msgid "Plain TeX macros for resumes"
-msgstr "TeXová makra pro šachové diagramy"
+msgid "This package includes the documentation for texlive-midnight"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(tuxpaint-stamps:tuxpaint-stamps-plants)
-msgid "Plants stamps collection for Tux Paint"
-msgstr ""
+#. summary(texlive-specs-o:texlive-midpage)
+#, fuzzy
+msgid "Environment for vertical centring"
+msgstr "Vývojářské prostředí pro CUPS"
-#. description(texlive-plari)
+#. description(texlive-specs-o:texlive-midpage)
msgid ""
-"Plari (the name comes from the Finnish usage for the working copy of a play) is a report-alike class, without section headings, and with paragraphs vertically separated rather than indented.\n"
+"The environment will centre text, if immediately preceded and followed by \\clearpage.\n"
"\n"
-"date: 2007-02-26 20:26:45 +0000"
+"date: 2012-05-28 13:41:52 +0000"
msgstr ""
-#. summary(texlive-pst-platon)
-msgid "Platonic solids in PSTricks"
-msgstr ""
+#. summary(texlive-specs-o:texlive-midpage-doc)
+#, fuzzy
+msgid "Documentation for texlive-midpage"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-reverxii)
-msgid "Playing Reversi in TeX"
+#. description(texlive-specs-o:texlive-midpage-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-midpage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mil3)
+msgid "Samples from Math into LaTeX, third edition"
msgstr ""
-#. description(texlive-plnfss)
+#. description(texlive-specs-o:texlive-mil3)
msgid ""
-"Plnfss is a set of macros to provide easy font access (somewhat similar to NFSS but with some limitations) with Plain TeX. Plnfss can automatically make use of PSNFSS fd files, i.e., when an Adobe Type 1 is used the relevant fd file will be loaded automatically. For cmr-like fonts (ec, vnr, csr or plr fonts), a special format called pfd (plain fd) is required and must be loaded manually. See ot1cmr.pfd for further information.\n"
+"Examples, samples and templates from the third edition of Gratzer's book.\n"
"\n"
-"date: 2008-05-21 08:21:02 +0000"
+"date: 2012-05-28 13:41:52 +0000"
msgstr ""
-#. summary(texlive-pst-calendar)
-msgid "Plot calendars in \"fancy\" ways"
+#. summary(texlive-specs-o:texlive-miller)
+msgid "Typeset miller indices"
msgstr ""
-#. summary(texlive-pst-plot)
-msgid "Plot data using PSTricks"
+#. description(texlive-specs-o:texlive-miller)
+msgid ""
+"Typeset miller indices, e.g., <1-20>, that are used in material science with an easy syntax. Minus signs are printed as bar above the corresponding number.\n"
+"\n"
+"date: 2012-05-25 14:20:41 +0000"
msgstr ""
-#. summary(texlive-numericplots)
-msgid "Plot numeric data (including Matlab export) using PSTricks"
-msgstr ""
+#. summary(texlive-specs-o:texlive-miller-doc)
+#, fuzzy
+msgid "Documentation for texlive-miller"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-pulley)
-msgid "Plot pulleys, using pstricks"
-msgstr ""
+#. description(texlive-specs-o:texlive-miller-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-miller"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-solarsystem)
-msgid "Plot the solar system for a specific date"
+#. summary(texlive-specs-o:texlive-minibox)
+msgid "A simple type of box for LaTeX"
msgstr ""
-#. summary(texlive-metaplot)
-msgid "Plot-manipulation macros for use in Metapost"
+#. description(texlive-specs-o:texlive-minibox)
+msgid ""
+"This small package provides a convenient input syntax for boxes that don't break their text over lines automatically, but do allow manual line breaks. The boxes shrink to the natural width of the longest line they contain.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pst-magneticfield)
-msgid "Plotting a magnetic field with PSTricks"
-msgstr ""
+#. summary(texlive-specs-o:texlive-minibox-doc)
+#, fuzzy
+msgid "Documentation for texlive-minibox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-infixplot)
-msgid ""
-"Plotting functions with pst-plot is very powerful but sometimes difficult to learn since the syntax of \\psplot and \\parametricplot requires some PostScript knowledge. The infix- RPN and pst-infixplot styles simplify the usage of pst-plot for the beginner, providing macro commands that convert natural mathematical expressions to PostScript syntax.\n"
-"\n"
-"date: 2006-12-19 18:38:44 +0000"
+#. description(texlive-specs-o:texlive-minibox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-minibox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-minifp)
+msgid "Fixed-point real computations to 8 decimals"
msgstr ""
-#. description(texlive-numericplots)
+#. description(texlive-specs-o:texlive-minifp)
msgid ""
-"Plotting numeric data is a task which has often to be done for scientific papers. LaTeX itself provides no facilities for drawing more than the simplest plots from supplied data. The package will process user input, and uses PSTricks to plot the results. The package provides Matlab functions to transform Matlab results to plottable data.\n"
+"The package provides basic arithmetic operations to 8 decimal places for plain TeX or LaTeX. Results are exact when they fit within the digit limits. Along with the basic package is an optional extension that adds computation of sin, cos, log, sqrt, exp, powers and angles. These are also exact when theoretically possible and are otherwise accurate to at least 7 decimal places. In addition, the package provides a stack-based programing environment.\n"
"\n"
-"date: 2013-04-25 10:06:29 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-gnupg)
-msgid "Plugin for transparent editing of gpg encrypted files"
-msgstr ""
+#. summary(texlive-specs-o:texlive-minifp-doc)
+#, fuzzy
+msgid "Documentation for texlive-minifp"
+msgstr "Dokumentace pro adaptx"
-#. description(vim-plugins:vim-plugin-calendar)
-msgid "Plugin for vim that displays simple calendar in the side window."
-msgstr ""
+#. description(texlive-specs-o:texlive-minifp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-minifp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(yum-utils:yum-priorities)
-msgid "Plugin to give priorities to packages from different repos"
+#. summary(texlive-specs-o:texlive-minipage-marginpar)
+msgid "Minipages with marginal notes"
msgstr ""
-#. summary(vim-plugins:vim-plugin-align)
-msgid "Plugin to produce aligned text, equations, declarations, etc"
+#. description(texlive-specs-o:texlive-minipage-marginpar)
+msgid ""
+"This package allows \\marginpar-commands inside of minipages and other boxes. (It takes another approach than marginnote by Markus Kohm: it saves all \\marginpar-commands and typesets them outside (i.e., after) the box.) The package defines an environment minipagewithmarginpars (to be used like minipage)-- and the internal commands may be used by other packages to define similar environments or commands.\n"
+"\n"
+"date: 2012-06-24 12:49:23 +0000"
msgstr ""
-#. summary(texlive-pl)
-msgid "Polish extension of CM fonts in Type 1 format"
-msgstr ""
+#. summary(texlive-specs-o:texlive-minipage-marginpar-doc)
+#, fuzzy
+msgid "Documentation for texlive-minipage-marginpar"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. summary(texlive-mex)
+#. description(texlive-specs-o:texlive-minipage-marginpar-doc)
#, fuzzy
-#| msgid "Polish Translations for KDE"
-msgid "Polish formats for TeX"
-msgstr "Polské překlady pro KDE"
+msgid "This package includes the documentation for texlive-minipage-marginpar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mwcls)
-msgid "Polish-oriented document classes"
+#. summary(texlive-specs-o:texlive-miniplot)
+msgid "A package for easy figure arrangement"
msgstr ""
-#. summary(texlive-pst-poly)
-msgid "Polygons with PSTricks"
+#. description(texlive-specs-o:texlive-miniplot)
+msgid ""
+"MiniPlot is a package to help the LaTeX user typeset EPS figures using an easy-to-use interface. Figures can be arranged as one-figure-only or as a collection of figures in columns and rows which can itself contain sub-figures in columns and rows. Wrapped figures are also supported. This package provides commands to display a framebox instead of the figure as the graphics package does already but additionally it writes useful information such as the label and scaling factor into these boxes.\n"
+"\n"
+"date: 2012-06-24 12:49:23 +0000"
msgstr ""
-#. summary(texlive-underoverlap)
-msgid "Position decorations over and under expressions"
+#. summary(texlive-specs-o:texlive-miniplot-doc)
+#, fuzzy
+msgid "Documentation for texlive-miniplot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-miniplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-miniplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-minitoc)
+msgid "Produce a table of contents for each chapter, part or section"
msgstr ""
-#. description(texlive-pst-math)
+#. description(texlive-specs-o:texlive-minitoc)
msgid ""
-"PostScript lacks a lot of basic operators such as tan, acos, asin, cosh, sinh, tanh, acosh, asinh, atanh, exp (with e base). Also (oddly) cos and sin use arguments in degrees. Pst-math provides all those operators in a header file pst-math.pro with wrappers pst-math.sty and pst-math.tex. In addition, sinc, gauss, gammaln and bessel are implemented (only partially for the latter). pst-math is designed essentially to work with pst- plot but can be used in whatever PS code (such as pstricks SpecialCoor \"!\", which is useful for placing labels). The package also provides a routine SIMPSON for numerical integration and a solver of linear equation systems.\n"
+"The minitoc package allows you to add mini-tables-of-contents (minitocs) at the beginning of every chapter, part or section. There is also provision for mini-lists of figures and of tables. At the part level, they are parttocs, partlofs and partlots. If the type of document does not use chapters, the basic provision is section level secttocs, sectlofs and sectlots. The package has provision for language-specific configuration of its own \"fixed names\", using .mld files (analagous to babel .ldf files that do that job for LaTeX\"s own fixed names).\n"
"\n"
-"date: 2010-10-02 21:46:37 +0000"
+"date: 2012-12-03 15:53:09 +0000"
msgstr ""
-#. summary(texlive-pstricks)
+#. summary(texlive-specs-o:texlive-minitoc-doc)
#, fuzzy
-#| msgid "PostScript and PDF Converter"
-msgid "PostScript macros for TeX"
-msgstr "Konvertor PostScriptu a PDF"
+msgid "Documentation for texlive-minitoc"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pspicture)
+#. description(texlive-specs-o:texlive-minitoc-doc)
#, fuzzy
-msgid "PostScript picture support"
-msgstr "Prohlížeče PostScriptu a PDF souborů pro KDE"
+msgid "This package includes the documentation for texlive-minitoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-powerdot)
+#. summary(texlive-specs-o:texlive-minorrevision)
+msgid "Quote and refer to a manuscript for minor revisions"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-minorrevision)
msgid ""
-"Powerdot is a presentation class for LaTeX that allows for the quick and easy development of professional presentations. It comes with many tools that enhance presentations and aid the presenter. Examples are automatic overlays, personal notes and a handout mode. To view a presentation, DVI, PS or PDF output can be used. A powerful template system is available to easily develop new styles. A LyX layout file is provided.\n"
+"The package supports those who publish articles in peer- reviewed journals. In the final stages of the review process, the authors typically have to provide an additional document (such as a letter to the editors), in which they provide a list of modifications that they made to the manuscript. The package automatically provides line numbers and quotations from the manuscript, for this letter. The package loads the package lineno, so (in effect) shares lineno's incompatibilities.\n"
"\n"
-"date: 2012-03-13 21:44:46 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-powerdot-FUBerlin)
-msgid "Powerdot, using the style of FU Berlin"
-msgstr ""
+#. summary(texlive-specs-o:texlive-minorrevision-doc)
+#, fuzzy
+msgid "Documentation for texlive-minorrevision"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nature)
-msgid "Prepare papers for the journal Nature"
-msgstr ""
+#. description(texlive-specs-o:texlive-minorrevision-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-minorrevision"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pmx)
-msgid "Preprocessor for MusiXTeX"
+#. summary(texlive-specs-o:texlive-minted)
+msgid "Highlighted source code for LaTeX"
msgstr ""
-#. summary(texlive-ifmslide)
-msgid "Presentation slides for screen and printouts"
+#. description(texlive-specs-o:texlive-minted)
+msgid ""
+"The package that facilitates expressive syntax highlighting in LaTeX using the powerful Pygments library. The package also provides options to customize the highlighted source code output using fancyvrb.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pdfslide)
-msgid "Presentation slides using pdftex"
-msgstr ""
+#. summary(texlive-specs-o:texlive-minted-doc)
+#, fuzzy
+msgid "Documentation for texlive-minted"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-present)
+#. description(texlive-specs-o:texlive-minted-doc)
#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Presentations with Plain TeX"
-msgstr "Zpracování XML pomocí TeXu"
+msgid "This package includes the documentation for texlive-minted"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mftinc)
-msgid "Pretty-print Metafont source"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mintspirit)
+#, fuzzy
+msgid "LaTeX support for MintSpirit font families"
+msgstr "XML podpora pro castor"
-#. description(texlive-prettyref)
+#. description(texlive-specs-o:texlive-mintspirit)
msgid ""
-"Prettyref provides a command \\newrefformat, which specifies the way in which a reference is typeset, according to a label \"identification\". The identification is set in the \\label command, by using prefixed label names; so instead of \\label{mysection}, one uses \\label{sec:mysection}, and prettyref interprets the \"sec:\" part. The package is compatible with hyperref and with other packages.\n"
+"The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the MintSpirit and MintSpiritNo2 families of fonts, designed by Hirwen Harendal. MintSpirit was originally designed for use as a system font on a Linux Mint system. The No. 2 variant provides more conventional shapes for some glyphs.\n"
"\n"
-"date: 2008-11-06 08:26:54 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-nonumonpart)
-msgid "Prevent page numbers on part pages"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mintspirit-doc)
+#, fuzzy
+msgid "Documentation for texlive-mintspirit"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-notoccite)
-msgid "Prevent trouble from citations in table of contents, etcetera"
-msgstr ""
+#. description(texlive-specs-o:texlive-mintspirit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mintspirit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-steinmetz)
-msgid "Print Steinmetz notation"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mintspirit-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-mintspirit"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pecha)
-msgid "Print Tibetan text in the classic pecha layout style"
-msgstr ""
+#. description(texlive-specs-o:texlive-mintspirit-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-mintspirit"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-termcal)
-msgid "Print a class calendar"
+#. summary(texlive-specs-o:texlive-minutes)
+msgid "Typeset the minutes of meetings"
msgstr ""
-#. summary(texlive-typogrid)
-msgid "Print a typographic grid"
+#. description(texlive-specs-o:texlive-minutes)
+msgid ""
+"Supports the creation of a collection of minutes. Features include: Support of tasks (who, schedule, what, time of finishing; possibility of creating a list of open tasks; inclusion of open tasks from other minutes; Support for attachments; Support of schedule dates (in planning: support for the calendar package); Different versions ('secret parts'); and Macros for votes and decisions (list of decisions). Support for minutes in German, Dutch and English is provided.\n"
+"\n"
+"date: 2014-01-08 11:40:39 +0000"
msgstr ""
-#. summary(texlive-pst-barcode)
-msgid "Print barcodes using PostScript"
-msgstr ""
+#. summary(texlive-specs-o:texlive-minutes-doc)
+#, fuzzy
+msgid "Documentation for texlive-minutes"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-pst-diffraction)
-msgid "Print diffraction patterns from various apertures"
-msgstr ""
+#. description(texlive-specs-o:texlive-minutes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-minutes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-printlen)
-msgid "Print lengths using specified units"
+#. summary(texlive-specs-o:texlive-mkgrkindex)
+msgid "Makeindex working with Greek"
msgstr ""
-#. summary(texlive-sepnum)
-msgid "Print numbers in a \"friendly\" format"
+#. description(texlive-specs-o:texlive-mkgrkindex)
+msgid ""
+"Makeindex is resolutely stuck with Latin-based alphabets, so will not deal with Greek indexes, unaided. This package provides a Perl script that will transmute the index of a Greek document in such a way that makeindex will sort the entries according to the rules of the Greek alphabet.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-numprint)
-msgid "Print numbers with separators and exponent if necessary"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mkgrkindex-doc)
+#, fuzzy
+msgid "Documentation for texlive-mkgrkindex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-labels)
-msgid "Print sheets of sticky labels"
-msgstr ""
+#. description(texlive-specs-o:texlive-mkgrkindex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mkgrkindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-kerntest)
-msgid "Print tables and generate control files to adjust kernings"
+#. summary(texlive-specs-o:texlive-mkjobtexmf)
+msgid "Generate a texmf tree for a particular job"
msgstr ""
-#. summary(texlive-showtags)
-msgid "Print the tags of bibliography entries"
+#. description(texlive-specs-o:texlive-mkjobtexmf)
+msgid ""
+"The package provides a Perl script, which runs a program and tries to find the names of file used. Two methods are available, option -recorder of (Web2C) TeX and the program strace. Then it generates a directory with a texmf tree. It checks the found files and tries sort them in this texmf tree. The script may be used for archiving purposes or to speed up later TeX runs.\n"
+"\n"
+"date: 2011-11-16 10:07:17 +0000"
msgstr ""
-#. summary(texlive-schemata)
-msgid "Print topical diagrams"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mkjobtexmf-doc)
+#, fuzzy
+msgid "Documentation for texlive-mkjobtexmf"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-twoinone)
-msgid "Print two pages on a single page"
-msgstr ""
+#. description(texlive-specs-o:texlive-mkjobtexmf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mkjobtexmf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-twoup)
-msgid "Print two virtual pages on each physical page"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mkpattern)
+#, fuzzy
+#| msgid "A utility for configuring serial ports"
+msgid "A utility for making hyphenation patterns"
+msgstr "Nástroje pro konfiguraci sériových portů"
-#. summary(texlive-makebarcode)
-msgid "Print various kinds 2/5 and Code 39 bar codes"
+#. description(texlive-specs-o:texlive-mkpattern)
+msgid ""
+"Mkpattern is a general purpose program for the generation of hyphenation patterns, with definition of letter sets and template-like constructions. It also provides an easy way to handle different input and output encodings, and featgures generation of clean UTF-8 patterns. The package was used for the creation of the Galician patterns.\n"
+"\n"
+"date: 2012-07-16 20:11:02 +0000"
msgstr ""
-#. summary(texlive-ltxfileinfo)
-msgid "Print version info for latex class or style file"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mkpattern-doc)
+#, fuzzy
+msgid "Documentation for texlive-mkpattern"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-vectorian)
-msgid "Printing ornaments"
-msgstr ""
+#. description(texlive-specs-o:texlive-mkpattern-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mkpattern"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-showtags)
+#. summary(texlive-specs-o:texlive-mkpic)
+#, fuzzy
+msgid "Perl interface to mfpic"
+msgstr "Perlové rozhraní k DNS resolveru"
+
+#. description(texlive-specs-o:texlive-mkpic)
msgid ""
-"Prints the tag right-aligned on each line of the bibliography.\n"
+"mkpic provides an easy interface for making small pictures with mfpic. To this end you create an input file consisting of commands, one per line, with space separated parameters (or you modify the DATA section of the mkpic script, which is used if you run it without an input file). For an extensive description see the file mkpicdoc.pdf, which is part of the distribution.\n"
"\n"
-"date: 2010-11-05 07:48:20 +0000"
+"date: 2014-04-30 18:39:22 +0000"
msgstr ""
-#. summary(texlive-latexfileversion)
-msgid "Prints the version and date of a LaTeX class or style file"
+#. summary(texlive-specs-o:texlive-mkpic-doc)
+#, fuzzy
+msgid "Documentation for texlive-mkpic"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mkpic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mkpic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mla-paper)
+msgid "Proper MLA formatting"
msgstr ""
-#. description(texlive-yplan)
+#. description(texlive-specs-o:texlive-mla-paper)
msgid ""
-"Prints two six-monthly vertical-type daily planner (i.e., months along the top, days downwards), with each 6-month period fitting onto a single A4 (or US letter) sheet. The package offers support for English, French, German, Spanish and Portuguese. The previous scheme of annual updates has now been abandoned, in favour of a Perl script yplan that generates a year's planner automatically. (The last manually-generated LaTeX file remains on the archive.)\n"
+"The package formats articles using the MLA style. The aim is that students and other academics in the humanities should be able to typeset their materials, properly, with minimal effort on their part.\n"
"\n"
-"date: 2006-12-16 09:58:44 +0000"
+"date: 2012-07-16 20:11:02 +0000"
msgstr ""
-#. description(texlive-protex)
+#. summary(texlive-specs-o:texlive-mla-paper-doc)
+#, fuzzy
+msgid "Documentation for texlive-mla-paper"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mla-paper-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mla-paper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mlist)
+msgid "Logical markup for lists"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-mlist)
msgid ""
-"ProTeX is a simple but powerful literate programming tool, which is designed to generate useful hypertext output (either PDF, or HTML using TeX4ht).\n"
+"The package defines commands that create macros for typesetting vectors, matrices and functions, in a logical way. For example, logical indexing can then be used to refer to elements or arguments without hard-coding the symbols in the document.\n"
"\n"
-"date: 2008-09-16 19:39:08 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pbsheet)
-msgid "Problem sheet class"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mlist-doc)
+#, fuzzy
+msgid "Documentation for texlive-mlist"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-mpgraphics)
-msgid "Process and display MetaPost figures inline"
-msgstr ""
+#. description(texlive-specs-o:texlive-mlist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mlist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lua-alt-getopt)
-msgid "Process application arguments the same way as getopt_long"
+#. summary(texlive-specs-o:texlive-mltex)
+msgid "The MLTeX system"
msgstr ""
-#. summary(texlive-makeindex)
-msgid "Process index output to produce typesettable code"
+#. description(texlive-specs-o:texlive-mltex)
+msgid ""
+"MLTeX is a modification of TeX version >=3.0 that allows the hyphenation of words with accented letters using ordinary Computer Modern (CM) fonts. The system is distributed as a TeX change file.\n"
+"\n"
+"date: 2012-07-16 20:11:02 +0000"
msgstr ""
-#. summary(texlive-lmake)
-msgid "Process lists to do repetitive actions"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mltex-doc)
+#, fuzzy
+msgid "Documentation for texlive-mltex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-newenviron)
-msgid "Processing an environment's body"
-msgstr ""
+#. description(texlive-specs-o:texlive-mltex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mltex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-outlines)
-msgid "Produce \"outline\" lists"
+#. summary(texlive-specs-o:texlive-mmap)
+msgid "Include CMap resources in PDF files from PDFTeX"
msgstr ""
-#. description(texlive-pstools)
+#. description(texlive-specs-o:texlive-mmap)
msgid ""
-"Produce Encapsulated PostScript Files (EPS/EPSF) from a one- page PostScript document, or any PostScript document. A correct Bounding Box is calculated for the EPS files and some PostScript command sequences that can produce errorneous results on printers are filtered. The input is cropped to include just the image contained in the PostScript file. The EPS files can then be included into TeX documents. Other programs like ps2epsi (a script distributed with ghostscript) don't always calculate the correct bounding box (because the values are put on the PostScript stack which may get corrupted by bad PostScript code) or they round it off, resulting in clipping the image. Therefore ps2eps uses a resolution of 144 dpi to get the correct bounding box. The bundle includes binaries for Linux, Solaris, Digital Unix or Windows 2000/9x/NT; for other platforms, the user needs perl, ghostscript and an ANSI-C compiler. Included in the distribution is the bbox program, an application to produce B
ounding Box values for rawppm or rawpbm format files.\n"
+"The package is an extension of cmap with improved flexibility and coverage, including the ability to re-encode Knuth's basic mathematics fonts.\n"
"\n"
-"date: 2012-07-20 18:39:39 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pstools)
+#. summary(texlive-specs-o:texlive-mmap-doc)
#, fuzzy
-#| msgid "Bitmap Image to Encapsulated PostScript Converter"
-msgid "Produce Encapsulated PostScript from PostScript"
-msgstr "Konvertor bitmapových obrázků do EPS"
+msgid "Documentation for texlive-mmap"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mf2pt1)
+#. description(texlive-specs-o:texlive-mmap-doc)
#, fuzzy
-#| msgid "Scalable PostScript Fonts for MetaFont"
-msgid "Produce PostScript Type 1 fonts from Metafont source"
-msgstr "Vektorová PostScriptová písma pro MetaFont"
+msgid "This package includes the documentation for texlive-mmap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-minitoc)
-msgid "Produce a table of contents for each chapter, part or section"
+#. summary(texlive-specs-o:texlive-mnotes)
+msgid "Margin annotation for collaborative writing"
msgstr ""
-#. summary(texlive-issuulinks)
-msgid "Produce external links instead of internal ones"
+#. description(texlive-specs-o:texlive-mnotes)
+msgid ""
+"The package provides a flexible mechanism for annotating, and commenting upon, collaboratively-written documents.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-listing)
-msgid "Produce formatted program listings"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mnotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-mnotes"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-knitting)
-msgid "Produce knitting charts, in Plain TeX or LaTeX"
-msgstr ""
+#. description(texlive-specs-o:texlive-mnotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mnotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nomencl)
-msgid "Produce lists of symbols as in nomenclature"
+#. summary(texlive-specs-o:texlive-mnsymbol)
+msgid "Mathematical symbol font for Adobe MinionPro"
msgstr ""
-#. summary(texlive-songs)
-msgid "Produce song books for church or fellowship"
+#. description(texlive-specs-o:texlive-mnsymbol)
+msgid ""
+"MnSymbol is a symbol font family, designed to be used in conjunction with Adobe Minion Pro (via the MinionPro package). Almost all of LaTeX and AMS mathematical symbols are provided; remaining coverage is available from the MinionPro font with the MinionPro package. The fonts are available both as Metafont source and as Adobe Type 1 format, and a comprehensive support package is provided. While the fonts were designed to fit with Minon Pro, the design should fit well with other renaissance or baroque faces: indeed, it will probably work with most fonts that are neither too wide nor too thin, for example Palatino or Times; it is known to look good with Sabon. There is no package designed to configure its use with any font other than Minion Pro, but (for example) simply loading mnsymbol after mathpazo will probably do what is needed.\n"
+"\n"
+"date: 2014-05-15 21:25:03 +0000"
msgstr ""
-#. summary(texlive-pst-bar)
-msgid "Produces bar charts using pstricks"
+#. summary(texlive-specs-o:texlive-mnsymbol-doc)
+#, fuzzy
+msgid "Documentation for texlive-mnsymbol"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mnsymbol-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mnsymbol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mnsymbol-fonts)
+msgid "Severed fonts for texlive-mnsymbol"
msgstr ""
-#. summary(texlive-wrapfig)
-msgid "Produces figures which text can flow around"
+#. description(texlive-specs-o:texlive-mnsymbol-fonts)
+msgid "The separated fonts package for texlive-mnsymbol"
msgstr ""
-#. description(texlive-nomencl)
-msgid ""
-"Produces lists of symbols using the capabilities of the MakeIndex program.\n"
-"\n"
-"date: 2007-01-11 23:17:35 +0000"
+#. summary(texlive-specs-o:texlive-moderncv)
+msgid "A modern curriculum vitae class"
msgstr ""
-#. description(texlive-prodint)
+#. description(texlive-specs-o:texlive-moderncv)
msgid ""
-"Product integrals are to products, as integrals are to sums. They have been around for more than a hundred years, they have not become part of the standard toolbox, possibly because no- one invented the right mathematical symbol for them. The authors remedied that situation by proposing the symbol and providing this font.\n"
+"The class provides facilities for typesetting modern curriculums vitae, both in a classic and in a casual style. It is fairly customizable, allowing you to define your own style by changing the colours, the fonts, etc. A number of templates are provided in the distribution examples subdirectory.\n"
"\n"
-"date: 2011-03-30 10:07:52 +0000"
+"date: 2013-04-30 06:59:42 +0000"
msgstr ""
-#. description(texlive-progress)
+#. summary(texlive-specs-o:texlive-moderncv-doc)
+#, fuzzy
+msgid "Documentation for texlive-moderncv"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-moderncv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-moderncv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-moderntimeline)
+#, fuzzy
+msgid "Timelines for use with moderncv"
+msgstr "Program pro odhalování slabých hesel"
+
+#. description(texlive-specs-o:texlive-moderntimeline)
msgid ""
-"Progress is a package which. when compiling TeX and LaTeX documents, generates a HTML file showing an overview of a document's state (of how finished it is). The report is sent to file \\ProgressReportName, which is by default the \\jobname with the date appended (but is user-modifiable).\n"
+"The package provides commands to configure and to draw time line diagrams; such diagrams are designed to fit into Curriculum Vitae documents written using the moderncv class.\n"
"\n"
-"date: 2007-01-06 20:10:04 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mla-paper)
-msgid "Proper MLA formatting"
+#. summary(texlive-specs-o:texlive-moderntimeline-doc)
+#, fuzzy
+msgid "Documentation for texlive-moderntimeline"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-moderntimeline-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-moderntimeline"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-modiagram)
+msgid "Drawing molecular orbital diagrams"
msgstr ""
-#. description(texlive-prosper)
+#. description(texlive-specs-o:texlive-modiagram)
msgid ""
-"Prosper is a LaTeX class for writing transparencies. It is written as an extension of the seminar class by Timothy Van Zandt. Prosper offers a friendly environment for creating slides for both presentations with an overhead projector and a video projector. Slides prepared for a presentation with a computer and a video projector may integrate animation effects, incremental display, and so on. Various visual styles are supported (including some that mimic PowerPoint) and others are being contributed.\n"
+"The package provides an environment MOdiagram and some commands, to create molecular orbital diagrams using TikZ. For example, the MO diagram of dihydrogen would be written as: \\begin{MOdiagram} \\atom{left}{ 1s = {0;up} } \\atom{right}{ 1s = {0;up} } \\molecule{ 1sMO = {1;pair, } } \\end{MOdiagram} The package also needs the l3kernel and l3packages bundles from the LaTeX 3 experimental distribution.\n"
"\n"
-"date: 2010-05-17 12:53:01 +0000"
+"date: 2014-05-13 17:18:34 +0000"
msgstr ""
-#. summary(texlive-ppr-prv)
-msgid "Prosper preview"
-msgstr ""
+#. summary(texlive-specs-o:texlive-modiagram-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-modiagram"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-turnthepage)
+#. description(texlive-specs-o:texlive-modiagram-doc)
#, fuzzy
-msgid "Provide \"turn page\" instructions"
-msgstr "Dokumentace pro castor"
+msgid "This package includes the documentation for texlive-modiagram"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-nicefilelist)
-msgid "Provide \\listfiles alignment"
+#. summary(texlive-specs-o:texlive-modref)
+msgid "Customisation of cross-references in LaTeX"
msgstr ""
-#. summary(texlive-pdfsync)
-msgid "Provide links between source and PDF"
+#. description(texlive-specs-o:texlive-modref)
+msgid ""
+"The package contains macros which allow authors to easily customise how cross-references appear in their document, both in general (across all cross-references) and for particular types of references (identified by a prefix in the reference label), in a very generic manner.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-stdclsdv)
-msgid "Provide sectioning information for package writers"
+#. summary(texlive-specs-o:texlive-modref-doc)
+#, fuzzy
+msgid "Documentation for texlive-modref"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-modref-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-modref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-modroman)
+msgid "Write numbers in lower case roman numerals"
msgstr ""
-#. description(texlive-tufte-latex)
+#. description(texlive-specs-o:texlive-modroman)
msgid ""
-"Provided are two classes inspired, respectively, by handouts and books created by Edward Tufte.\n"
+"This package provides only two macros viz. \\modromannumeral which writes the number given as argument in lower case roman numeral with a 'j' instead of a 'i' as the final letter of numbers greater than 1 and \\modroman{MyCounter} which writes the value of a counter in the same way. You use the first in the same way as the TeX primitive \\romannumeral and the second as LaTeX command \\roman. The default option is 'vpourv' with which 5 is 'translated' as 'v' and option 'upourv' whith which the same 5 is given as 'u'.\n"
"\n"
-"date: 2011-11-10 05:59:33 +0000"
+"date: 2012-07-07 20:27:26 +0000"
msgstr ""
-#. description(texlive-nextpage)
+#. summary(texlive-specs-o:texlive-modroman-doc)
+#, fuzzy
+msgid "Documentation for texlive-modroman"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-modroman-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-modroman"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mongolian-babel)
+msgid "A language definition file for Mongolian in Babel"
+msgstr ""
+
+#. description(texlive-specs-o:texlive-mongolian-babel)
msgid ""
-"Provides \\clearpage and \\newpage variants that guarantee to end up on even/odd numbered pages; these 4 commands all have an optional argument whose content will be placed on any \"empty\" page generated.\n"
+"This package provides support for Mongolian in a Cyrillic alphabet. (The work derives from the earlier Russian work for babel.)\n"
"\n"
-"date: 2009-09-03 11:12:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ifetex)
-msgid "Provides \\ifetex switch"
+#. summary(texlive-specs-o:texlive-mongolian-babel-doc)
+#, fuzzy
+msgid "Documentation for texlive-mongolian-babel"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mongolian-babel-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mongolian-babel"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-monofill)
+msgid "Alignment of plain text"
msgstr ""
-#. description(texlive-srcltx)
+#. description(texlive-specs-o:texlive-monofill)
msgid ""
-"Provides a \\special insertion into generated .dvi files allowing one to jump from the .dvi file to the .tex source and back again (given a .dvi viewer that supports this, such as Yap or xdvi version 22.38 or later). This was originally written by Aleksander Simonic, the author of the WinEdt shell.\n"
+"The package provides horizontal alignment, as in the LaTeX command \\listfiles (or the author's longnamefilelist package). Uses may include in-text tables, or even code listings.\n"
"\n"
-"date: 2006-12-07 14:13:33 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-sepnum)
-msgid ""
-"Provides a command to print a number with (potentially different) separators every three digits in the parts either side of the decimal point (the point itself is also configurable). The macro is fully expandable and not fragile (unless one of the separators is). There is also a command \\sepnumform, that may be used when defining \\the<counter> macros.\n"
-"\n"
-"date: 2010-10-24 12:34:20 +0000"
+#. summary(texlive-specs-o:texlive-monofill-doc)
+#, fuzzy
+msgid "Documentation for texlive-monofill"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-monofill-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-monofill"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-montex)
+msgid "Mongolian LaTeX"
msgstr ""
-#. description(texlive-varindex)
+#. description(texlive-specs-o:texlive-montex)
msgid ""
-"Provides a convenient front-end for the \\index command. For example, with it you can generate multiple index entries in almost any form by a single command. The package is highly customizable, and works with all versions of LaTeX and probably most other TeX formats.\n"
+"MonTeX provides Mongolian and Manju support for the TeX/LaTeX community. Mongolian is a language spoken in North East Asia, namely Mongolia and the Inner Mongol Autonomous Region of China. Today, it is written in an extended Cyrillic alphabet in Mongolia whereas the Uighur writing continues to be in use in Inner Mongolia, though it is also, legally speaking, the official writing system of Mongolia. Manju is another language of North East Asia, belonging to the Tungusic branch of the Altaic languages. Though it is hardly spoken nowadays, it survives in written form as Manju was the native language of the rulers of the Qing dynasty (1644-1911) in China. Large quantities of documents of the Imperial Archives survive, as well as some of the finest dictionaries ever compiled in Asia, like the Pentaglot, a dictionary comprising Manju, Tibetan, Mongolian, Uighur and Chinese. MonTeX provides all necessary characters for writing standard Mongolian in Cyrillic and Classical (aka Traditional
or Uighur) writing, and Manju as well as transliterated Tibetan texts, for which purpose a number of additional characters was created. In MonTeX, both Mongolian and Manju are entered in romanized form. The retransliteration (from Latin input to Mongolian and Manju output) is completely realized in TeX/Metafont so that no external preprocessor is required. Please note that most of the enhanced functions of MonTeX require a working e-LaTeX environment. This is especially true when compiling documents with Mongolian or Manju as the main document language. It is recommended to choose pdfelatex as the resulting PDF files are truly portable. Vertical text generated by MonTeX is not supported in DVI.\n"
"\n"
-"date: 2008-02-29 18:54:55 +0000"
+"date: 2012-07-07 20:27:26 +0000"
msgstr ""
-#. description(texlive-vmargin)
-msgid ""
-"Provides a macro to set various margins as well as dimensions for header/footer and page dimensions. Most common paper sizes, paper orientation, disabling of headers and footers, and two sided printing are supported. The vmargin package does not rely on other packages and was designed with speed and size in mind. Its user interface might not be very fancy, but it's fast, small, and gets the job done. If you are looking for something more elaborate try the geometry package.\n"
-"\n"
-"date: 2009-09-27 10:18:28 +0000"
+#. summary(texlive-specs-o:texlive-montex-doc)
+#, fuzzy
+msgid "Documentation for texlive-montex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-montex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-montex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-montex-fonts)
+msgid "Severed fonts for texlive-montex"
msgstr ""
-#. description(texlive-oubraces)
-msgid ""
-"Provides a means to interleave \\overbrace and \\underbrace in the same formula.\n"
-"\n"
-"date: 2011-03-25 10:24:40 +0000"
+#. description(texlive-specs-o:texlive-montex-fonts)
+msgid "The separated fonts package for texlive-montex"
msgstr ""
-#. description(texlive-parallel)
-msgid ""
-"Provides a parallel environment which allows two potentially different texts to be typeset in two columns, while maintaining alignment. The two columns may be on the same page, or on facing pages. This arrangement of text is commonly used when typesetting translations, but it can have value when comparing any two texts.\n"
-"\n"
-"date: 2007-01-12 19:52:49 +0000"
+#. summary(texlive-specs-o:texlive-moreenum)
+msgid "More enumeration options"
msgstr ""
-#. description(texlive-threeparttable)
+#. description(texlive-specs-o:texlive-moreenum)
msgid ""
-"Provides a scheme for tables that have a structured note section, after the caption. This scheme provides an answer to the old problem of putting footnotes in tables -- by making footnotes entirely unnecessary. Note that a threeparttable is not a float of itself; but you can place it in a table or a table* environment, if necessary.\n"
+"The package provides the following new enumerate styles: \\greek for lowercase Greek letters; \\Greek for uppercase Greek letters; \\enumHex for uppercase hexadecimal enumeration; \\enumhex for lowercase hexadecimal enumeration; \\enumbinary for binary enumeration; \\enumoctal for octal enumeration; \\levelnth for \"1st\", \"2nd\", \"3rd\" etc., with the \"nth\"s on the baseline; raisenth for \"1st\", \"2nd\", \"3rd\" etc., with the \"nth\"s raised; \\nthwords for \"first\", \"second\", \"third\" etc.; \\Nthwords for \"First\", \"Second\", \"Third\" etc.; \\NTHWORDS for \"FIRST\", \"SECOND\", \"THIRD\" etc.; \\nwords for \"one\", \"two\", \"three\" etc.; \\Nwords for \"One\", \"Two\", \"Three\" etc.; and \\NWORDS for \"ONE\", \"TWO\", \"THREE\" etc. Each of these works with enumitem's \"starred variant\" feature. So \\begin{enumerate}[label=\\enumhex*] will output a hex enumerated list. Enumitem provides a start=0 option for starting your enumerations at 0. The package requires ams
math, alphalph, enumitem (of course), binhex and nth, all of which are widely available.\n"
"\n"
-"date: 2010-03-09 12:13:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-natbib)
-msgid ""
-"Provides a style with author-year and numbered references, as well as much detailed of support for other bibliography use. Provides versions of the standard BibTeX styles that are compatible with natbib - plainnat, unsrtnat, abbrnat. The bibliography styles produced by custom-bib are designed from the start to be compatible with natbib.\n"
-"\n"
-"date: 2010-12-06 20:27:27 +0000"
+#. summary(texlive-specs-o:texlive-moreenum-doc)
+#, fuzzy
+msgid "Documentation for texlive-moreenum"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-moreenum-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-moreenum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-morefloats)
+msgid "Increase the number of simultaneous LaTeX floats"
msgstr ""
-#. description(texlive-ticket)
+#. description(texlive-specs-o:texlive-morefloats)
msgid ""
-"Provides an easy to handle interface to produce visiting cards, labels for your files, stickers, pins and other stuff for your office, conferences etc. All you need is a definition of your 'ticket' included in a ticket definition file and the two commands \\ticketdefault and \\ticket.\n"
+"LaTeX can, by default, only cope with 18 outstanding floats; any more, and you get the error \"too many unprocessed floats\". This package releases the limit; TeX itself imposes limits (which are independent of the help offered by e-TeX). However, if your floats can't be placed anywhere, extending the number of floats merely delays the arrival of the inevitable error message.\n"
"\n"
-"date: 2010-12-06 19:55:11 +0000"
+"date: 2012-07-07 20:27:26 +0000"
msgstr ""
-#. description(texlive-movie15)
-msgid ""
-"Provides an interface to embed movies, sounds and 3D objects into PDF documents for use with LaTeX as well as pdfLaTeX. Defines \\includemovie with PDF-1.5 compatibility. Option 'autoplay' causes the media clip to be started right after the page has loaded. This is useful for side by side movie clips to be played back synchronously.\n"
-"\n"
-"date: 2012-05-17 11:04:31 +0000"
+#. summary(texlive-specs-o:texlive-morefloats-doc)
+#, fuzzy
+msgid "Documentation for texlive-morefloats"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-morefloats-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-morefloats"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-morehype)
+msgid "Hypertext tools for use with LaTeX"
msgstr ""
-#. description(texlive-tugboat)
+#. description(texlive-specs-o:texlive-morehype)
msgid ""
-"Provides both ltugboat.cls (for ordinary issues of the journal) and ltugproc.cls (for issues that are proceedings of TUG meetings). The distribution also includes a BibTeX style appropriate for use with the classes' \"harvard\" option.\n"
+"The bundle provides three packages: texlinks: shorthand macros for TeX-related external hyperlinks with hyperref, the blog package in the present bundle, etc; hypertoc: adjust the presentation of coloured frames in hyperref tables of contents (article class only); blog: fast generation of simple HTML by expanding LaTeX macros, using the fifinddo package.\n"
"\n"
-"date: 2013-02-01 10:51:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(xmlunit)
-msgid "Provides classes to do asserts on XML"
+#. summary(texlive-specs-o:texlive-morehype-doc)
+#, fuzzy
+msgid "Documentation for texlive-morehype"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-morehype-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-morehype"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-moresize)
+msgid "Allows font sizes up to 35.83pt"
msgstr ""
-#. description(texlive-umoline)
+#. description(texlive-specs-o:texlive-moresize)
msgid ""
-"Provides commands \\Underline, \\Midline and \\Overline for underlining, striking out, and overlining their text arguments.\n"
+"A package for using font sizes up to 35.88pt, for example with the EC fonts. New commands \\HUGE and \\ssmall for selecting font sizes are provided together with some options working around current LaTeX2e shortcomings in using big font sizes. The package also provides options for improving the typesetting of paragraphs (or headlines) with embedded math expressions at font sizes above 17.28pt.\n"
"\n"
-"date: 2007-01-20 14:20:16 +0000"
+"date: 2012-07-17 11:35:08 +0000"
msgstr ""
-#. description(texlive-qobitree)
+#. summary(texlive-specs-o:texlive-moresize-doc)
+#, fuzzy
+msgid "Documentation for texlive-moresize"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-moresize-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-moresize"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-moreverb)
+#, fuzzy
+#| msgid "Extended Clipboard"
+msgid "Extended verbatim"
+msgstr "Rozšířená schránka"
+
+#. description(texlive-specs-o:texlive-moreverb)
msgid ""
-"Provides commands \\branch and \\leaf for specifying the elements of the tree; you build up your tree with those commands, and then issue the \\tree command to typeset the whole.\n"
+"A collection of verbatim facilities that provide line-numbered verbatim, verbatim that obey's TAB characters, verbatim input and verbatim output to file. The package makes use of the LaTeX required verbatim package. The package formed from a series of small pieces, and is somewhat unstructured. The user who looks for thought-through verbatim facilities is advised to consider using the fancyvrb package in place of moreverb.\n"
"\n"
-"date: 2008-11-29 23:16:40 +0000"
+"date: 2012-07-07 20:19:01 +0000"
msgstr ""
-#. description(texlive-needspace)
-msgid ""
-"Provides commands to disable pagebreaking within a given vertical space. If there is not enough space between the command and the bottom of the page, a new page will be started.\n"
-"\n"
-"date: 2013-04-01 12:35:12 +0000"
+#. summary(texlive-specs-o:texlive-moreverb-doc)
+#, fuzzy
+msgid "Documentation for texlive-moreverb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-moreverb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-moreverb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-morewrites)
+msgid "Always room for a new write stream"
msgstr ""
-#. description(texlive-tocvsec2)
+#. description(texlive-specs-o:texlive-morewrites)
msgid ""
-"Provides control over section numbering (without recourse to starred sectional commands) and/or the entries in the Table of Contents on a section by section basis.\n"
+"The package aims to solve the error \"No room for a new \\write\", which occurs when the user, or when the user's packages have 'allocated too many streams using \\newwrite (TeX has a fixed maximum number - 16 - such streams built-in to its code). The package hooks into TeX primitive commands associated with writing to files; it should be loaded near the beginning of the sequence of loading packages for a document. The package uses the l3kernel bundle.\n"
"\n"
-"date: 2010-02-28 09:58:14 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tocloft)
+#. summary(texlive-specs-o:texlive-morewrites-doc)
+#, fuzzy
+msgid "Documentation for texlive-morewrites"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-morewrites-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-morewrites"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-movie15)
+#, fuzzy
+msgid "Multimedia inclusion package"
+msgstr "Aktualizovat balíky"
+
+#. description(texlive-specs-o:texlive-movie15)
msgid ""
-"Provides control over the typography of the Table of Contents, List of Figures and List of Tables, and the ability to create new `List of ...'. The ToC \\parskip can be changed.\n"
+"The package provides an interface to embed movies, sounds and 3D objects into PDF documents for use with LaTeX as well as pdfLaTeX. The package defines a command \\includemovie with PDF- 1.5 compatibility. Option 'autoplay' causes the media clip to be started right after the page has loaded. This is useful for side by side movie clips to be played back synchronously. The package is now superseded by media9\n"
"\n"
-"date: 2013-05-02 16:21:19 +0000"
+"date: 2014-01-08 11:40:39 +0000"
msgstr ""
-#. description(texlive-xcolor)
-msgid ""
-"Provides easy driver-independent access to several kinds of color tints, shades, tones, and mixes of arbitrary colors. It allows a user to select a document-wide target color model and offers complete tools for conversion between eight color models. Additionally, there is a command for alternating row colors plus repeated non-aligned material (like horizontal lines) in tables. Colors can be mixed like \\color{red!30!green!40!blue}.\n"
-"\n"
-"date: 2007-01-21 22:54:12 +0000"
+#. summary(texlive-specs-o:texlive-movie15-doc)
+#, fuzzy
+msgid "Documentation for texlive-movie15"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-movie15-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-movie15"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mp3d)
+msgid "3D animations"
msgstr ""
-#. description(texlive-paralist)
+#. description(texlive-specs-o:texlive-mp3d)
msgid ""
-"Provides enumerate and itemize environments that can be used within paragraphs to format the items either as running text or as separate paragraphs with a preceding number or symbol. Also provides compacted versions of enumerate and itemize.\n"
+"Create animations of 3-dimensional objects (such as polyhedra) in MetaPost.\n"
"\n"
-"date: 2009-10-07 19:35:42 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-randbild)
-msgid ""
-"Provides environments randbild, to draw small marginal plots (using the package pstricks package pst-plot), and randbildbasis (the same, only without the automatically drawn coordinate system).\n"
-"\n"
-"date: 2007-05-16 05:57:15 +0000"
+#. summary(texlive-specs-o:texlive-mp3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-mp3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mp3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mp3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mparhack)
+msgid "Work around a LaTeX bug in marginpars"
msgstr ""
-#. description(texlive-trajan)
+#. description(texlive-specs-o:texlive-mparhack)
msgid ""
-"Provides fonts (in both MetaFont and Adobe Type 1 format) based on the capitals carved on the Trajan column in Rome in 114 AD, together with macros to access the fonts. Many typographers think these rank first among the Roman's artistic legacy. The font is uppercase letters together with some punctuation and analphabetics; no lowercase or digits.\n"
+"Works around the LaTeX bug that marginpars will sometimes come out at the wrong margin.\n"
"\n"
-"date: 2007-10-24 16:05:15 +0000"
+"date: 2012-07-17 11:35:08 +0000"
msgstr ""
-#. description(texlive-soul)
-msgid ""
-"Provides hyphenatable spacing out (letterspacing), underlining, striking out, etc., using the TeX hyphenation algorithm to find the proper hyphens automatically. The package also provides a mechanism that can be used to implement similar tasks, that have to treat text syllable by syllable. This is shown in two examples. The package itself does not support UTF-8 input in ordinary (PDF)LaTeX; some UTF-8 support is offered by package soulutf8\n"
-"\n"
-"date: 2009-10-09 22:35:28 +0000"
+#. summary(texlive-specs-o:texlive-mparhack-doc)
+#, fuzzy
+msgid "Documentation for texlive-mparhack"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mparhack-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mparhack"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mpattern)
+msgid "Patterns in MetaPost"
msgstr ""
-#. description(texlive-qsymbols)
+#. description(texlive-specs-o:texlive-mpattern)
msgid ""
-"Provides macros for defining systematic mnemonic abbreviations, starting with ` for math symbols and \\\" for arrows, using standard symbols as well as those from the amsfonts bundle and the stmaryrd package.\n"
+"A package for defining and using patterns in MetaPost, using the Pattern Color Space available in PostScript Level 2.\n"
"\n"
-"date: 2009-06-24 22:34:53 +0000"
+"date: 2012-07-17 11:35:08 +0000"
msgstr ""
-#. description(texlive-setspace)
-msgid ""
-"Provides support for setting the spacing between lines in a document. Package options include singlespacing, onehalfspacing, and doublespacing. Alternatively the spacing can be changed as required with the \\singlespacing, \\onehalfspacing, and \\doublespacing commands. Other size spacings also available.\n"
-"\n"
-"date: 2011-12-19 11:40:22 +0000"
+#. summary(texlive-specs-o:texlive-mpattern-doc)
+#, fuzzy
+msgid "Documentation for texlive-mpattern"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mpattern-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mpattern"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mpcolornames)
+msgid "Extend list of predefined colour names for MetaPost"
msgstr ""
-#. description(texlive-subfigure)
+#. description(texlive-specs-o:texlive-mpcolornames)
msgid ""
-"Provides support for the manipulation and reference of small or 'sub' figures and tables within a single figure or table environment. It is convenient to use this package when your subfigures are to be separately captioned, referenced, or are to be included in the List-of-Figures. A new \\subfigure command is introduced which can be used inside a figure environment for each subfigure. An optional first argument is used as the caption for that subfigure. This package is now obsolescent: new users should use subfig instead.\n"
+"The MetaPost format plain.mp provides only five built-in colour names (variables), all of which are defined in the RGB model: red, green and blue for the primary colours and black and white. The package makes more than 500 colour names from different colour sets in different colour models available to MetaPost. Colour sets include X11, SVG, DVIPS and xcolor specifications.\n"
"\n"
-"date: 2010-04-20 09:43:44 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ifluatex)
-msgid "Provides the \\ifluatex switch"
+#. summary(texlive-specs-o:texlive-mpcolornames-doc)
+#, fuzzy
+msgid "Documentation for texlive-mpcolornames"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-o:texlive-mpcolornames-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mpcolornames"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-o:texlive-mpgraphics)
+msgid "Process and display MetaPost figures inline"
msgstr ""
-#. description(texlive-titlefoot)
+#. description(texlive-specs-o:texlive-mpgraphics)
msgid ""
-"Provides the capability of adding keywords (with a \\keywords command), a running title (\\runningtitle), AMS subject classifications (\\amssubj), and an 'author's footnote' as footnotes to the title or first page of a document. Works with any class for which the \\thanks macro works (e.g., article).\n"
+"The package allows LaTeX users to typeset MetaPost code inline and display figures in their documents with only and only one run of LaTeX, PDFLaTeX or XelaTeX (no separate runs of mpost). Mpgraphics achieves this by using the shell escape (\\write 18) feature of current TeX distributions, so that the whole process is automatic and the end user is saved the tiresome processing.\n"
"\n"
-"date: 2007-01-16 23:08:13 +0000"
+"date: 2014-04-29 04:13:54 +0000"
msgstr ""
-#. description(thunar-plugin-shares:thunar-plugin-shares-lang)
-msgid "Provides translations to the package thunar-plugin-shares"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mpgraphics-doc)
+#, fuzzy
+msgid "Documentation for texlive-mpgraphics"
+msgstr "Dokumentace pro gawk"
-#. description(thunar-plugin-vcs:thunar-plugin-vcs-lang)
-msgid "Provides translations to the package thunar-plugin-vcs"
-msgstr ""
+#. description(texlive-specs-o:texlive-mpgraphics-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mpgraphics"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(tilda:tilda-lang)
-msgid "Provides translations to the package tilda"
-msgstr ""
+#. summary(texlive-specs-o:texlive-mpman-ru)
+#, fuzzy
+msgid "A Russian translation of the MetaPost manual"
+msgstr "Ruské překlady pro KDE"
-#. description(tomboy:tomboy-lang)
-msgid "Provides translations to the package tomboy"
+#. description(texlive-specs-o:texlive-mpman-ru)
+msgid ""
+"A translation of the user manual, as distributed with MetaPost itself.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(tomoe-gtk:tomoe-gtk-lang)
-msgid "Provides translations to the package tomoe-gtk"
+#. summary(texlive-specs-p:texlive-mptopdf)
+msgid "Mpost to PDF, native MetaPost graphics inclusion"
msgstr ""
-#. description(totem:totem-lang)
-msgid "Provides translations to the package totem"
+#. description(texlive-specs-p:texlive-mptopdf)
+msgid "The mptopdf script does standalone conversion from mpost to PDF, using the supp-* and syst-* files. They also allow native MetaPost graphics inclusion in LaTeX (via pdftex.def) and ConTeXt. They can be used independently of the rest of ConTeXt, yet are maintained as part of it. So in TeX Live we pull them out to this separate package for the benefit of LaTeX users who do not install the rest of ConTeXt. This can be found on CTAN in macros/pdftex/graphics."
msgstr ""
-#. description(totem-pl-parser:totem-pl-parser-lang)
-msgid "Provides translations to the package totem-pl-parser"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mptopdf-doc)
+#, fuzzy
+msgid "Documentation for texlive-mptopdf"
+msgstr "Dokumentace pro adaptx"
-#. description(tracker:tracker-lang)
-msgid "Provides translations to the package tracker"
-msgstr ""
+#. description(texlive-specs-p:texlive-mptopdf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mptopdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(trader:trader-lang)
-msgid "Provides translations to the package trader"
+#. summary(texlive-specs-p:texlive-ms)
+msgid "Various LaTeX packages by Martin Schroder"
msgstr ""
-#. description(transmageddon:transmageddon-lang)
-msgid "Provides translations to the package transmageddon"
+#. description(texlive-specs-p:texlive-ms)
+msgid ""
+"A bundle of LaTeX packages by Martin Schroder; the collection comprises: count1to, make use of fixed TeX counters; everysel, set commands to execute every time a font is selected; everyshi, set commands to execute whenever a page is shipped out; multitoc, typeset the table of contents in multiple columns; prelim2e, mark typeset pages as preliminary; and ragged2e, typeset ragged text and allow hyphenation.\n"
+"\n"
+"date: 2014-01-08 11:40:39 +0000"
msgstr ""
-#. description(transmission:transmission-gtk-lang)
-msgid "Provides translations to the package transmission"
-msgstr ""
+#. summary(texlive-specs-p:texlive-ms-doc)
+#, fuzzy
+msgid "Documentation for texlive-ms"
+msgstr "Dokumentace pro adaptx"
-#. description(tre:tre-lang)
-msgid "Provides translations to the package tre"
-msgstr ""
+#. description(texlive-specs-p:texlive-ms-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ms"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(turpial:turpial-lang)
-msgid "Provides translations to the package turpial"
+#. summary(texlive-specs-p:texlive-msc)
+msgid "Draw MSC diagrams"
msgstr ""
-#. description(tuxpaint-config:tuxpaint-config-lang)
-msgid "Provides translations to the package tuxpaint-config"
+#. description(texlive-specs-p:texlive-msc)
+msgid ""
+"The package should be useful to all people that prepare their texts with LaTeX and want to draw Message Sequence Charts in their texts. The package is not an MSC editor; it simply takes a textual description of an MSC and draws the corresponding MSC. The current version of the MSC macro package supports the full MSC2000 language.\n"
+"\n"
+"date: 2012-05-24 15:58:39 +0000"
msgstr ""
-#. description(udisks2:udisks2-lang)
-msgid "Provides translations to the package udisks2"
-msgstr ""
+#. summary(texlive-specs-p:texlive-msc-doc)
+#, fuzzy
+msgid "Documentation for texlive-msc"
+msgstr "Dokumentace pro adaptx"
-#. description(uget:uget-lang)
-msgid "Provides translations to the package uget"
-msgstr ""
+#. description(texlive-specs-p:texlive-msc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-msc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(upower:upower-lang)
-msgid "Provides translations to the package upower"
-msgstr ""
+#. summary(texlive-specs-p:texlive-msg)
+#, fuzzy
+msgid "A package for LaTeX localisation"
+msgstr "Prohlížeč prezentací z OpenOffice.org a KOffice"
-#. description(util-linux:util-linux-lang)
-msgid "Provides translations to the package util-linux"
+#. description(texlive-specs-p:texlive-msg)
+msgid ""
+"The package is designed to localise any document class or package. This should be very useful for end-users who could obtain messages in their own preferred language. It is really easy to use by writers of other classes and packages. Volunteers are urged to test the package, report, and even to localise the message file to their own language. Documentation is provided in English.\n"
+"\n"
+"date: 2012-06-02 13:31:06 +0000"
msgstr ""
-#. description(vacuum-im:vacuum-im-lang)
+#. summary(texlive-specs-p:texlive-msg-doc)
#, fuzzy
-msgid "Provides translations to the package vacuum-im"
-msgstr "Poskytuje překlady k balíčku compiz"
+msgid "Documentation for texlive-msg"
+msgstr "Dokumentace pro adaptx"
-#. description(vino:vino-lang)
-msgid "Provides translations to the package vino"
-msgstr ""
+#. description(texlive-specs-p:texlive-msg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-msg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(virtaal:virtaal-lang)
-msgid "Provides translations to the package virtaal"
+#. summary(texlive-specs-p:texlive-mslapa)
+msgid "Michael Landy's APA citation style"
msgstr ""
-#. description(vlc:vlc-noX-lang)
-msgid "Provides translations to the package vlc"
+#. description(texlive-specs-p:texlive-mslapa)
+msgid ""
+"LaTeX and BibTeX style files for a respectably close approximation to APA (American Psychological Association) citation and reference style.\n"
+"\n"
+"date: 2012-05-24 15:58:39 +0000"
msgstr ""
-#. description(vorbis-tools:vorbis-tools-lang)
-msgid "Provides translations to the package vorbis-tools"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mslapa-doc)
+#, fuzzy
+msgid "Documentation for texlive-mslapa"
+msgstr "Dokumentace pro adaptx"
-#. description(vte:vte-lang)
-msgid "Provides translations to the package vte"
-msgstr ""
+#. description(texlive-specs-p:texlive-mslapa-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mslapa"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(wammu:wammu-lang)
-msgid "Provides translations to the package wammu"
+#. summary(texlive-specs-p:texlive-msu-thesis)
+msgid "Class for Michigan State University Master's and PhD theses"
msgstr ""
-#. description(weather-wallpaper:weather-wallpaper-lang)
-msgid "Provides translations to the package weather-wallpaper"
+#. description(texlive-specs-p:texlive-msu-thesis)
+msgid ""
+"This is a class file for producing dissertations and theses according to the Michigan State University Graduate School Guidelines for Electronic Submission of Master's Theses and Dissertations (2012). The class is updated whenever the university guidelines change. The class is based on the memoir document class, and thefore inherits all of the functionality of that class.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(weechat:weechat-lang)
-msgid "Provides translations to the package weechat"
-msgstr ""
+#. summary(texlive-specs-p:texlive-msu-thesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-msu-thesis"
+msgstr "Dokumentace pro adaptx"
-#. description(x-tile:x-tile-lang)
-msgid "Provides translations to the package x-tile"
+#. description(texlive-specs-p:texlive-msu-thesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-msu-thesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-mtgreek)
+msgid "Use italic and upright greek letters with mathtime"
msgstr ""
-#. description(xchat:xchat-lang)
-msgid "Provides translations to the package xchat"
+#. description(texlive-specs-p:texlive-mtgreek)
+msgid ""
+"This package is an add-on to the MathTime a style to provide TeX support for the use of the MathTime(tm) fonts (formerly distributed by YandY, Inc.). The MathTime package has uppercase Greek letters hardwired to be upright and only upright; this package provides a switch to choose between the two kinds of Greek uppercase letters.\n"
+"\n"
+"date: 2012-06-03 11:49:17 +0000"
msgstr ""
-#. description(xdg-user-dirs:xdg-user-dirs-lang)
+#. summary(texlive-specs-p:texlive-mtgreek-doc)
#, fuzzy
-#| msgid "Provides translations to the package dasher"
-msgid "Provides translations to the package xdg-user-dirs"
-msgstr "Poskytuje překlady k balíčku dasher"
+msgid "Documentation for texlive-mtgreek"
+msgstr "Dokumentace pro adaptx"
-#. description(xdg-user-dirs-gtk:xdg-user-dirs-gtk-lang)
-msgid "Provides translations to the package xdg-user-dirs-gtk"
-msgstr ""
+#. description(texlive-specs-p:texlive-mtgreek-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mtgreek"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(xfburn:xfburn-lang)
-msgid "Provides translations to the package xfburn"
+#. summary(texlive-specs-p:texlive-multenum)
+msgid "Multi-column enumerated lists"
msgstr ""
-#. description(xfce4-panel-plugin-whiskermenu:xfce4-panel-plugin-whiskermenu-lang)
-msgid "Provides translations to the package xfce4-panel-plugin-whiskermenu"
+#. description(texlive-specs-p:texlive-multenum)
+msgid ""
+"Defines an environment multienumerate, that produces an enumerated array in which columns are vertically aligned on the counter. The motivation was lists of answers for a text book, where there are many rather small items; the multienumerate environment goes some way to making such lists look neater.\n"
+"\n"
+"date: 2012-01-23 14:27:59 +0000"
msgstr ""
-#. description(xfmpc:xfmpc-lang)
-msgid "Provides translations to the package xfmpc"
-msgstr ""
+#. summary(texlive-specs-p:texlive-multenum-doc)
+#, fuzzy
+msgid "Documentation for texlive-multenum"
+msgstr "Dokumentace pro adaptx"
-#. description(xkeyboard-config:xkeyboard-config-lang)
+#. description(texlive-specs-p:texlive-multenum-doc)
#, fuzzy
-#| msgid "Provides translations to the package cogl"
-msgid "Provides translations to the package xkeyboard-config"
-msgstr "Poskytuje překlady k balíčku cogl"
+msgid "This package includes the documentation for texlive-multenum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(xz:xz-lang)
-msgid "Provides translations to the package xz"
-msgstr ""
+#. summary(texlive-specs-p:texlive-multibbl)
+#, fuzzy
+#| msgid "Multiple Move"
+msgid "Multiple bibliographies"
+msgstr "Program pro přesun a přejmenování více souborů"
-#. description(yelp:yelp-lang)
-msgid "Provides translations to the package yelp"
+#. description(texlive-specs-p:texlive-multibbl)
+msgid ""
+"The package multibbl redefines the standard bibliographic commands so that one can generate multiple reference sections. Each section has it own auxiliary file (for use with BibTeX) and title.\n"
+"\n"
+"date: 2012-06-03 10:03:29 +0000"
msgstr ""
-#. description(yum:yum-lang)
-msgid "Provides translations to the package yum"
-msgstr ""
+#. summary(texlive-specs-p:texlive-multibbl-doc)
+#, fuzzy
+msgid "Documentation for texlive-multibbl"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. description(zenity:zenity-lang)
-msgid "Provides translations to the package zenity"
+#. description(texlive-specs-p:texlive-multibbl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multibbl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multibib)
+msgid "Multiple bibliographies within one document"
msgstr ""
-#. description(texlive-nestquot)
+#. description(texlive-specs-p:texlive-multibib)
msgid ""
-"Provides two new commands: \\nlq and \\nrq for nesting left and right quotes that properly change between double and single quotes according to their nesting level. For example, the input \\nlq Foo \\nlq bar\\nrq\\ bletch\\nrq will be typeset as if it had been entered as \"Foo 'bar' bletch\".\n"
+"The package the creation of references to multiple bibliographies within one document. It thus provides complementary functionality to packages like bibunits and chapterbib, which allow the creation of one bibliography for multiple, but different parts of the document. Multibib is compatible with inlinebib, natbib, and koma-script.\n"
"\n"
-"date: 2012-06-06 16:43:10 +0000"
+"date: 2012-06-03 10:05:00 +0000"
msgstr ""
-#. description(texlive-pst-2dplot)
-msgid ""
-"Pst-2dplot is a pstricks package that offers an easy-to-use and intuitive tool for plotting 2-d curves. It defines an environment with commands similar to MATLAB for plotting.\n"
-"\n"
-"date: 2006-12-31 09:43:01 +0000"
+#. summary(texlive-specs-p:texlive-multibib-doc)
+#, fuzzy
+msgid "Documentation for texlive-multibib"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-p:texlive-multibib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multibib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multibibliography)
+msgid "Multiple versions of a bibliography, with different sort orders"
msgstr ""
-#. description(texlive-pst-blur)
+#. description(texlive-specs-p:texlive-multibibliography)
msgid ""
-"Pst-blur is a package built for use with PSTricks. It provides macros that apply blurring to the normal shadow function of PSTricks.\n"
+"Conventional standards for bibliography styles impose a forced choice between index and name/year citations, and corresponding references. The package avoids this choice, by providing alphabetic, sequenced, and even chronological orderings of references. Inline citations, that integrate these heterogeneous styles, are also supported (and work with other bibliography packages).\n"
"\n"
-"date: 2006-12-19 18:38:44 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-coil)
-msgid ""
-"Pst-coil is a PSTricks based package for coils and zigzags and for coil and zigzag node connections.\n"
-"\n"
-"date: 2011-09-19 15:03:12 +0000"
+#. summary(texlive-specs-p:texlive-multibibliography-doc)
+#, fuzzy
+msgid "Documentation for texlive-multibibliography"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-p:texlive-multibibliography-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multibibliography"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multicap)
+msgid "Format captions inside multicols"
msgstr ""
-#. description(texlive-pst-cox)
+#. description(texlive-specs-p:texlive-multicap)
msgid ""
-"Pst-cox is a PSTricks package for drawing 2-dimensional projections of complex regular polytopes (after the work of Coxeter). The package consists of a macro library for drawing the projections. The complex polytopes appear in the study of the root systems and play a crucial role in many domains related to mathematics and physics. These polytopes have been completely described by Coxeter in his book \"Regular Complex Polytopes\". There exist only a finite numbers of exceptional regular complex polytopes (for example the icosahedron) and some infinite series (for example, one can construct a multi- dimensional analogue of the hypercube in any finite dimension). The library contains two packages. The first, pst-coxcoor, is devoted to the exceptional complex regular polytopes whose coordinates have been pre-computed. The second, pst-coxeterp, is devoted to the infinite series.\n"
+"This is a package for formatting captions of column figures and column tabular material, which cannot be standard floats in a multicols environment. The package also provides a convenient way to customise your captions, whether they be in multicols or not.\n"
"\n"
-"date: 2008-08-22 22:25:16 +0000"
+"date: 2012-06-03 11:48:34 +0000"
msgstr ""
-#. description(texlive-pst-eps)
-msgid ""
-"Pst-eps is a PSTricks-based package for exporting PSTricks images 'on the fly' to encapsulated PostScript (EPS) image files, which can then be read into a document in the usual way.\n"
-"\n"
-"date: 2007-02-27 23:07:21 +0000"
+#. summary(texlive-specs-p:texlive-multicap-doc)
+#, fuzzy
+msgid "Documentation for texlive-multicap"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-p:texlive-multicap-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multicap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multido)
+msgid "A loop facility for Generic TeX"
msgstr ""
-#. description(texlive-pst-fill)
+#. description(texlive-specs-p:texlive-multido)
msgid ""
-"Pst-fill is a PSTricks-based package for filling and tiling areas or characters.\n"
+"The package provides the \\multido command, which was originally designed for use with PSTricks. Fixed-point arithmetic is used when working on the loop variable, so that the package is equally applicable in graphics applications like PSTricks as it is with the more common integer loops.\n"
"\n"
-"date: 2007-03-11 14:39:31 +0000"
+"date: 2012-06-03 11:49:17 +0000"
msgstr ""
-#. description(texlive-pst-grad)
-msgid ""
-"Pst-grad is a PSTricks based package for filling with colour gradients. Supported are colours in the RGB, CMYK or HSB models. Other colour gradient mechanisms are to be found in package pst-slpe.\n"
-"\n"
-"date: 2007-07-11 09:50:31 +0000"
+#. summary(texlive-specs-p:texlive-multido-doc)
+#, fuzzy
+msgid "Documentation for texlive-multido"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-multido-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multido"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multienv)
+msgid "Multiple environments using a \"key=value\" syntax"
msgstr ""
-#. description(texlive-pst-labo)
+#. description(texlive-specs-p:texlive-multienv)
msgid ""
-"Pst-labo is a PSTricks related package for drawing basic and complex chemical objects. The documentation of the package is illuminated with plenty of illustrations together with their source code, making it an easy read.\n"
+"The package provides a multienv environment which permits easy addition of multiple environments using a key=value syntax. Macros to define environments using this syntax are also provided.\n"
"\n"
-"date: 2007-03-11 15:56:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-stru)
-msgid ""
-"Pst-stru is a PSTricks-based package to draw structural schemes in civil engineering analysis, for beams, portals, arches and piles.\n"
-"\n"
-"date: 2008-08-22 22:25:16 +0000"
+#. summary(texlive-specs-p:texlive-multienv-doc)
+#, fuzzy
+msgid "Documentation for texlive-multienv"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-multienv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multienv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multiexpand)
+msgid "Variations on the primitive command \\expandafter"
msgstr ""
-#. description(texlive-pst-text)
+#. description(texlive-specs-p:texlive-multiexpand)
msgid ""
-"Pst-text is a PSTricks based package for plotting text along a different path and manipulating characters. It includes the functionality of the old package pst-char.\n"
+"The package provides two user commands; one that performs multiple expansions, and one that does multiple \\expandafter operations, in a single macro call. The package requires eTeX's \\numexpr command. The author suggests that the same effect could be provided by use of the command variant mechanisms of LaTeX 3 (see, for example, the interface documentation of the experimental LaTeX 3 kernel).\n"
"\n"
-"date: 2007-03-11 15:56:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-nameauth)
+#. summary(texlive-specs-p:texlive-multiexpand-doc)
+#, fuzzy
+msgid "Documentation for texlive-multiexpand"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-multiexpand-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multiexpand"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multiobjective)
+msgid "Symbols for multiobjective optimisation etcetera"
+msgstr ""
+
+#. description(texlive-specs-p:texlive-multiobjective)
msgid ""
-"Publications, that reference many names, require editors and proofreaders to track those names in the text and index. The package offers name authority macros that allow authors and compilers to normalize occurrences of names, variant name forms, and pen names in the text and index. This may help minimize writing and production time and cost.\n"
+"The package provides a series of operators commonly used in papers related to multiobjective optimisation, multiobjective evolutionary algorithms, multicriteria decision making and similar fields.\n"
"\n"
-"date: 2013-04-03 09:32:41 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lpic)
-msgid "Put LaTeX material over included graphics"
-msgstr ""
+#. summary(texlive-specs-p:texlive-multiobjective-doc)
+#, fuzzy
+msgid "Documentation for texlive-multiobjective"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mcaption)
-msgid "Put captions in the margin"
+#. description(texlive-specs-p:texlive-multiobjective-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multiobjective"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-multirow)
+msgid "Create tabular cells spanning multiple rows"
msgstr ""
-#. summary(texlive-pst-abspos)
-msgid "Put objects at an absolute position"
+#. description(texlive-specs-p:texlive-multirow)
+msgid ""
+"The package has a lot of flexibility, including an option for specifying an entry at the \"natural\" width of its text. The package is distributed with the bigdelim and bigstrut packages, which can be used to advantage with \\multirow cells.\n"
+"\n"
+"date: 2012-07-17 14:43:33 +0000"
msgstr ""
-#. summary(texlive-semioneside)
-msgid "Put only special contents on left-hand pages in two sided layout"
+#. summary(texlive-specs-p:texlive-multirow-doc)
+#, fuzzy
+msgid "Documentation for texlive-multirow"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-multirow-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-multirow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-munich)
+msgid "An alternative authordate bibliography style"
msgstr ""
-#. description(texlive-pxfonts)
+#. description(texlive-specs-p:texlive-munich)
msgid ""
-"Pxfonts supplies virtual text roman fonts using Adobe Palatino (or URWPalladioL) with some modified and additional text symbols in the OT1, T1, and TS1 encodings; maths alphabets using Palatino/Palladio; maths fonts providing all the symbols of the Computer Modern and AMS fonts, including all the Greek capital letters from CMR; and additional maths fonts of various other symbols. The set is complemented by a sans-serif set of text fonts, based on Helvetica/NimbusSanL, and a monospace set derived from the parallel TX font set. All the fonts are in Type 1 format (AFM and PFB files), and are supported by TeX metrics (VF and TFM files) and macros for use with LaTeX.\n"
+"The Munich BibTeX style is produced with custom-bib, as a German (and, more generally, Continental European) alternative to such author-date styles as harvard and oxford.\n"
"\n"
-"date: 2009-01-15 08:33:18 +0000"
+"date: 2012-07-17 14:43:33 +0000"
msgstr ""
-#. description(texlive-qcm)
+#. summary(texlive-specs-p:texlive-munich-doc)
+#, fuzzy
+msgid "Documentation for texlive-munich"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-munich-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-munich"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-musixguit)
+msgid "Easy notation for guitar music, in MusixTeX"
+msgstr ""
+
+#. description(texlive-specs-p:texlive-musixguit)
msgid ""
-"QCM is a package for making multiple choices questionnaires under LaTeX2e (\"QCM\" is the French acronym for this style of test). A special environment allows you to define questions and possible answers. You can specify which answers are correct and which are not. QCM not only formats the questions for you, but also generates a 'form' (a grid that your students will have to fill in), and a 'mask' (the same grid, only with correct answers properly checked in). You can then print the mask on a slide and correct the questionnaires more easily by superimposing the mask on top of students' forms. QCM can also typeset exam corrections automatically, and comes with support for AUC-TeX.\n"
+"The package provides commands for typesetting notes for guitar, especially for simplifying guitar notation with MusixTeX.\n"
"\n"
-"date: 2009-03-26 14:47:40 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-trivfloat)
-msgid "Quick float definitions in LaTeX"
-msgstr ""
+#. summary(texlive-specs-p:texlive-musixguit-doc)
+#, fuzzy
+msgid "Documentation for texlive-musixguit"
+msgstr "Dokumentace pro adaptx"
-#. summary(vim-plugins:vim-plugin-quilt)
-msgid "Quilt support for vim"
+#. description(texlive-specs-p:texlive-musixguit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-musixguit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-musixtex)
+msgid "Sophisticated music typesetting"
msgstr ""
-#. description(texlive-rtklage)
+#. description(texlive-specs-p:texlive-musixtex)
msgid ""
-"RATeX is a newly developed bundle of packages and classes provided for German lawyers. Now in the early beginning it only contains rtklage, a class to make lawsuits.\n"
+"MusiXTeX provides a set of macros, based on the earlier MusicTeX, for typesetting music with TeX. To produce optimal spacing, MusixTeX is a three-pass system: etex, musixflx, and etex again. (Musixflx is a lua script that is provided in the bundle.) The three-pass process, optionally followed by processing for printed output, is automated by the musixtex wrapper script. The package uses its own specialised fonts, which must be available on the system for musixtex to run. This version of MusixTeX builds upon work by Andreas Egler, whose own version is no longer being developed. The MusiXTeX macros are universally acknowledged to be challenging to use directly: the pmx preprocessor compiles a simpler input language to MusixTeX macros..\n"
"\n"
-"date: 2006-02-07 17:31:12 +0000"
+"date: 2013-12-12 23:08:29 +0000"
msgstr ""
-#. summary(texlive-rsfs)
-msgid "Ralph Smith's Formal Script font"
-msgstr ""
+#. summary(texlive-specs-p:texlive-musixtex-doc)
+#, fuzzy
+msgid "Documentation for texlive-musixtex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-randomwalk)
-msgid "Random walks using TikZ"
-msgstr ""
+#. description(texlive-specs-p:texlive-musixtex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-musixtex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-randtext)
-msgid "Randomise the order of characters in strings"
+#. summary(texlive-specs-p:texlive-musixtex-fonts)
+msgid "Fonts used by MusixTeX"
msgstr ""
-#. summary(texlive-odsfile)
-msgid "Read OpenDocument Spreadsheet documents as LaTeX tables"
+#. description(texlive-specs-p:texlive-musixtex-fonts)
+msgid ""
+"These are fonts for use with MusixTeX; they are provided both as original Metafont source, and as converted Adobe Type 1. The bundle renders the older (Type 1 fonts only) bundle musixtex- t1fonts obsolete.\n"
+"\n"
+"date: 2014-05-15 21:25:03 +0000"
msgstr ""
-#. summary(texlive-readarray)
-msgid "Read, store and recall array-formatted data"
-msgstr ""
+#. summary(texlive-specs-p:texlive-musixtex-fonts-doc)
+#, fuzzy
+msgid "Documentation for texlive-musixtex-fonts"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texlogos)
-msgid "Ready-to-use LaTeX logos"
+#. description(texlive-specs-p:texlive-musixtex-fonts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-musixtex-fonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-musixtex-fonts-fonts)
+msgid "Severed fonts for texlive-musixtex-fonts"
msgstr ""
-#. summary(texlive-rectopma)
-msgid "Recycle top matter"
+#. description(texlive-specs-p:texlive-musixtex-fonts-fonts)
+msgid "The separated fonts package for texlive-musixtex-fonts"
msgstr ""
-#. summary(texlive-savesym)
-msgid "Redefine symbols where names conflict"
+#. summary(texlive-specs-p:texlive-musuos)
+msgid "Typeset papers for the department of music, Osnabruck"
msgstr ""
-#. description(texlive-mathdots)
+#. description(texlive-specs-p:texlive-musuos)
msgid ""
-"Redefines \\ddots and \\vdots, and defines \\iddots. The dots produced by \\iddots slant in the opposite direction to \\ddots. All the commands are designed to change size appropriately in scripts, as well as in response to LaTeX size changing commands. The commands may also be used in plain TeX.\n"
+"The package provides a LaTeX class for typesetting term papers at the institute of music and musicology of the University of Osnabruck, Germany, according to the specifications of Prof. Stefan Hahnheide. A biblatex style is provided.\n"
"\n"
-"date: 2007-06-01 08:48:38 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-xetexref)
+#. summary(texlive-specs-p:texlive-musuos-doc)
#, fuzzy
-msgid "Reference documentation of XeTeX"
-msgstr "Dokumentace PHP v HTML"
+msgid "Documentation for texlive-musuos"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lastpage)
-msgid "Reference last page for Page N of M type footers"
+#. description(texlive-specs-p:texlive-musuos-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-musuos"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-muthesis)
+msgid "Classes for University of Manchester Dept of Computer Science"
msgstr ""
-#. description(texlive-lastpage)
+#. description(texlive-specs-p:texlive-muthesis)
msgid ""
-"Reference the number of pages in your LaTeX document through the introduction of a new label which can be referenced like \\pageref{LastPage} to give a reference to the last page of a document. It is particularly useful in the page footer that says: Page N of M.\n"
+"The bundle provides thesis and project report document classes from the University of Manchester's Department of Computer Science.\n"
"\n"
-"date: 2013-01-29 09:13:54 +0000"
+"date: 2012-02-09 20:58:23 +0000"
msgstr ""
-#. summary(texlive-tex-refs)
-msgid "References for TeX and Friends"
-msgstr ""
+#. summary(texlive-specs-p:texlive-muthesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-muthesis"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-theoremref)
-msgid "References with automatic theorem names"
-msgstr ""
+#. description(texlive-specs-p:texlive-muthesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-muthesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rviewport)
-msgid "Relative Viewport for Graphics Inclusion"
+#. summary(texlive-specs-p:texlive-mversion)
+msgid "Keeping track of document versions"
msgstr ""
-#. summary(texlive-warpcol)
-msgid "Relative alignment of rows in numeric columns in tabulars"
+#. description(texlive-specs-p:texlive-mversion)
+msgid ""
+"The package enables the user to keep track of different versions of a latex document. The command \\version prints the version and build numbers; each time you compile your document, the build number is increased by one. By placing \\version in the header or footer, each page can be marked with the unique build number describing the progress of your document.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-luabibentry)
-msgid "Repeat BibTeX entries in a LuaLaTeX document body"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mversion-doc)
+#, fuzzy
+msgid "Documentation for texlive-mversion"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-repeatindex)
-msgid "Repeat items in an index after a page or column break"
+#. description(texlive-specs-p:texlive-mversion-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mversion"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-mwcls)
+msgid "Polish-oriented document classes"
msgstr ""
-#. summary(texlive-mailmerge)
-msgid "Repeating text field substitution"
+#. description(texlive-specs-p:texlive-mwcls)
+msgid ""
+"mwcls is a set of document classes for LaTeX 2e designed with Polish typographical tradition in mind. Classes include: 'mwart' (which is a replacement for 'article'), 'mwrep' (replacing 'report'), and 'mwbk' (replacing 'book'). Most features present in standard classes work with mwcls classes. Some extensions/exceptions include: sectioning commands allow for second optional argument (it is possible to state different texts for running head and for TOC), new environments 'itemize*' and 'enumerate*' for lists with long items, page styles have variants for normal, opening, closing, and blank pages.\n"
+"\n"
+"date: 2013-10-30 12:56:38 +0000"
msgstr ""
-#. summary(texlive-pkfix)
+#. summary(texlive-specs-p:texlive-mwcls-doc)
#, fuzzy
-msgid "Replace pk fonts in PostScript with Type 1 fonts"
-msgstr "Konvertor True Type fontů na PostScript Type 1 fonty"
+msgid "Documentation for texlive-mwcls"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-psfrag)
+#. description(texlive-specs-p:texlive-mwcls-doc)
#, fuzzy
-#| msgid "Bitmap Image to Encapsulated PostScript Converter"
-msgid "Replace strings in encapsulated PostScript figures"
-msgstr "Konvertor bitmapových obrázků do EPS"
+msgid "This package includes the documentation for texlive-mwcls"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-luainputenc)
-msgid "Replacing inputenc for use in LuaTeX"
+#. summary(texlive-specs-p:texlive-mwe)
+msgid "Packages and image files for MWEs"
msgstr ""
-#. summary(texlive-xetexfontinfo)
-msgid "Report font features in XeTeX"
+#. description(texlive-specs-p:texlive-mwe)
+msgid ""
+"The bundle provides several files useful when creating a minimal working example (MWE). The package itself loads a small set of packages often used when creating MWEs. In addition, a range of images are provided, which will be installed in the TEXMF tree, so that they may be used in any (La)TeX document. This allows different users to share MWEs which include image commands, without the need to share image files or to use replacement code.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tikzscale)
-msgid "Resize pictures while respecting text size"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mwe-doc)
+#, fuzzy
+msgid "Documentation for texlive-mwe"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-noconflict)
-msgid "Resolve macro name conflict between packages"
-msgstr ""
+#. description(texlive-specs-p:texlive-mwe-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mwe"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pdf14)
-msgid "Restore PDF 1.4 to a TeX live 2010 format"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mweights)
+#, fuzzy
+msgid "Support for multiple-weight font packages"
+msgstr "syslog-ng pomocná databáze - vývojářský balík"
-#. summary(texlive-ionumbers)
-msgid "Restyle numbers in maths mode"
+#. description(texlive-specs-p:texlive-mweights)
+msgid ""
+"Many font families available for use with LaTeX are available at multiple weights. Many Type 1-oriented support packages for such fonts re-define the standard \\mddefault or \\bfdefault macros. This can create difficulties if the weight desired for one font family isn't available for another font family, or if it differs from the weight desired for another font family. The package provides a solution to these difficulties.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-rlepsf)
-msgid "Rewrite labels in EPS graphics"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mweights-doc)
+#, fuzzy
+msgid "Documentation for texlive-mweights"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-wnri)
-msgid "Ridgeway's fonts"
+#. description(texlive-specs-p:texlive-mweights-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mweights"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-mxedruli)
+msgid "A pair of fonts for different Georgian alphabets"
msgstr ""
-#. summary(texlive-romanneg)
-msgid "Roman page numbers negative"
+#. description(texlive-specs-p:texlive-mxedruli)
+msgid ""
+"Two Georgian fonts, in both Metafont and Type 1 formats, which cover the Mxedruli and the Xucuri alphabets.\n"
+"\n"
+"date: 2013-04-18 11:20:04 +0000"
msgstr ""
-#. summary(texlive-romande)
-msgid "Romande ADF fonts and LaTeX support"
+#. summary(texlive-specs-p:texlive-mxedruli-doc)
+#, fuzzy
+msgid "Documentation for texlive-mxedruli"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-mxedruli-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mxedruli"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-mxedruli-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-mxedruli"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-mxedruli-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-mxedruli"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-p:texlive-mychemistry)
+msgid "Create reaction schemes with LaTeX and ChemFig"
msgstr ""
-#. description(texlive-romande)
+#. description(texlive-specs-p:texlive-mychemistry)
msgid ""
-"Romande ADF is a serif font family with oldstyle figures, designed as a substitute for Times, Tiffany or Caslon. The family currently includes upright, italic and small-caps shapes in each of regular and demi-bold weights and an italic script in regular. The support package renames the fonts according to the Karl Berry fontname scheme and defines four families. Two of these primarily provide access to the \"standard\" or default characters while the \"alternate\" families support alternate characters, additional ligatures and the long s. The included package files provide access to these features in LaTeX as explained in the documentation. The LaTeX support requires the nfssext-cfr and the xkeyval packages.\n"
+"The package provides commands for typesetting complex chemical reaction schemes with LaTeX and ChemFig. The package requires the packages ChemFig, mhchem, chemcompounds and (sometimes) chemexec.\n"
"\n"
-"date: 2010-07-14 21:31:19 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-rotfloat)
-msgid "Rotate floats"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mychemistry-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-mychemistry"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-isorot)
-msgid "Rotation of document elements"
-msgstr ""
+#. description(texlive-specs-p:texlive-mychemistry-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mychemistry"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rotating)
-msgid "Rotation tools, including rotated full-page floats"
+#. summary(texlive-specs-p:texlive-mycv)
+msgid "A list-driven CV class, allowing TikZ decorations"
msgstr ""
-#. summary(texlive-roundbox)
-msgid "Round boxes in LaTeX"
+#. description(texlive-specs-p:texlive-mycv)
+msgid ""
+"The class provides a set of functionality for writing \"curriculum vitae\" with different layouts. The idea is that a user can write some custom configuration directives, by means of which is possible both to produce different c.v. layouts and quickly switch among them. In order to process such directives, the class uses a set of lists, provided by the package etextools. Basic support for using TikZ decorations is also provided.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tuxpaint-stamps)
-msgid "Rubber stamps collection for Tux Paint"
-msgstr ""
+#. summary(texlive-specs-p:texlive-mycv-doc)
+#, fuzzy
+msgid "Documentation for texlive-mycv"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-namespc)
-msgid "Rudimentary c++-like namespaces in LaTeX"
-msgstr ""
+#. description(texlive-specs-p:texlive-mycv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-mycv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(xindy:xindy-rules)
-msgid "Rule files for Xindy"
+#. summary(texlive-specs-p:texlive-mylatexformat)
+msgid "Build a format based on the preamble of a LaTeX file"
msgstr ""
-#. summary(texlive-xetex-pstricks)
-msgid "Running PStricks under XeTeX"
+#. description(texlive-specs-p:texlive-mylatexformat)
+msgid ""
+"The use of formats helps to speed up compilations: packages which have been dumped in the format are loaded at very high speed. This is useful when a document loads many packages (including large packages such as pgf-TikZ). The package was developed from the work in mylatex, and eliminates many of the limitations and problems of that package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ruhyphen)
+#. summary(texlive-specs-p:texlive-mylatexformat-doc)
#, fuzzy
-#| msgid "Russian ispell dictionary"
-msgid "Russian hyphenation"
-msgstr "Ruský slovník pro ispell"
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-mylatexformat"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-lshort-russian)
+#. description(texlive-specs-p:texlive-mylatexformat-doc)
#, fuzzy
-#| msgid "Russian Dictionary for MySpell"
-msgid "Russian introduction to LaTeX"
-msgstr "Ruský slovník pro MySpell"
+msgid "This package includes the documentation for texlive-mylatexformat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lshort-russian)
+#. summary(texlive-specs-p:texlive-nag)
+msgid "Detecting and warning about obsolete LaTeX commands"
+msgstr ""
+
+#. description(texlive-specs-p:texlive-nag)
msgid ""
-"Russian version of A Short Introduction to LaTeX2e.\n"
+"Old habits die hard. All the same, there are commands, classes and packages which are outdated and superseded. The nag package provides routines to warn the user about the use of such obsolete things. As an example, we provide an extension that detects many of the \"sins\" described in l2tabu.\n"
"\n"
-"date: 2006-12-27 23:06:45 +0000"
+"date: 2012-06-16 08:11:41 +0000"
msgstr ""
-#. summary(texlive-sugconf)
-msgid "SAS(R) user group conference proceedings document class"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nag-doc)
+#, fuzzy
+msgid "Documentation for texlive-nag"
+msgstr "Dokumentace pro adaptx"
-#. summary(xmldb-api:xmldb-api-sdk)
-msgid "SDK for XML:DB API"
+#. description(texlive-specs-p:texlive-nag-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nag"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-nameauth)
+msgid "Name authority mechanism for consistency in body text and index"
msgstr ""
-#. description(wxWidgets:wxWidgets-plugin-sound_sdlu-2_8-stl-32bit)
+#. description(texlive-specs-p:texlive-nameauth)
msgid ""
-"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"Publications, that reference many names, require editors and proofreaders to track those names in the text and index. The package offers name authority macros that allow authors and compilers to normalize occurrences of names, variant name forms, and pen names in the text and index. This may help minimize writing and production time and cost.\n"
"\n"
-"API version: 2.8 ABI variant: STL API with Unicode support"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(wxWidgets-ansi:wxWidgets-ansi-plugin-sound_sdl-2_8-wxcontainer-32bit)
-msgid ""
-"SDL Plugin for the wxWidgets cross-platform GUI.\n"
-"\n"
-"API version: 2.8 ABI variant: wx container API with ANSI wxString"
+#. summary(texlive-specs-p:texlive-nameauth-doc)
+#, fuzzy
+msgid "Documentation for texlive-nameauth"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nameauth-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nameauth"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-namespc)
+msgid "Rudimentary C++-like namespaces in LaTeX"
msgstr ""
-#. description(wxWidgets-wxcontainer:wxWidgets-wxcontainer-plugin-sound_sdlu-2_8-wxcontainer-32bit)
+#. description(texlive-specs-p:texlive-namespc)
msgid ""
-"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"The namespc package adds rudimentary C++-like namespace functionality to LaTeX. It may be used to declare local LaTeX commands, which can be made accessible in a later contexts without defining them globally.\n"
"\n"
-"API version: 2.8 ABI variant: wx container API with Unicode support"
+"date: 2012-06-16 08:11:41 +0000"
msgstr ""
-#. description(wxWidgets-wxcontainer24c:wxWidgets-wxcontainer24c-plugin-sound_sdlu-2_8-wxcontainer24c-32bit)
-msgid ""
-"SDL Plugin for the wxWidgets cross-platform GUI.\n"
-"\n"
-"API version: 2.8 ABI variant: wx container API with Unicode support and 2.4 compatibility"
+#. summary(texlive-specs-p:texlive-namespc-doc)
+#, fuzzy
+msgid "Documentation for texlive-namespc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-namespc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-namespc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-nanumtype1)
+msgid "Type1 subfonts of Nanum Korean fonts"
msgstr ""
-#. description(wxWidgets-3_0:wxWidgets-3_0-plugin-sound_sdlu-3_0-stl-32bit)
+#. description(texlive-specs-p:texlive-nanumtype1)
msgid ""
-"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"Nanum is a unicode font designed especially for Korean-language script. The font was designed by Sandoll Communication and Fontrix; it includes the sans serif (gothic), serif (myeongjo), pen script and brush script typefaces. The package provides Type1 subfonts converted from Nanum Myeongjo (Regular and ExtraBold) and Nanum Gothic (Regular and Bold) OTFs. C70, LUC, T1, and TS1 font definition files are also provided. (The package does not include OpenType/TrueType files, which are available from Naver)\n"
"\n"
-"API version: 3.0 (development version, API details are still not frozen) ABI variant: STL API with Unicode/ANSI support"
+"date: 2014-05-17 08:22:20 +0000"
msgstr ""
-#. summary(w3c-markup-validator:w3c-markup-validator-libs)
-msgid "SGML and XML DTDs for the W3C Markup Validator"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nanumtype1-doc)
+#, fuzzy
+msgid "Documentation for texlive-nanumtype1"
+msgstr "Dokumentace pro adaptx"
-#. description(w3c-markup-validator:w3c-markup-validator-libs)
-msgid "SGML and XML DTDs for the W3C Markup Validator."
-msgstr ""
+#. description(texlive-specs-p:texlive-nanumtype1-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nanumtype1"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-opteng)
-msgid "SPIE Optical Engineering and OE Letters manuscript template"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nanumtype1-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-nanumtype1"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-titlepages)
-msgid "Sample titlepages, and how to code them"
-msgstr ""
+#. description(texlive-specs-p:texlive-nanumtype1-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-nanumtype1"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-mil3)
-msgid "Samples from Math into LaTeX, third edition"
+#. summary(texlive-specs-p:texlive-natbib)
+msgid "Flexible bibliography support"
msgstr ""
-#. description(texlive-sansmathaccent)
+#. description(texlive-specs-p:texlive-natbib)
msgid ""
-"Sans serif maths (produced by the beamer class or the sfmath package) often has accents positioned incorrectly. The package fixes the positioning of such accents when the default font (cmssi) is used for sans serif maths.\n"
+"The bundle provides a package that implements both author-year and numbered references, as well as much detailed of support for other bibliography use. Also Provided are versions of the standard BibTeX styles that are compatible with natbib-- plainnat, unsrtnat, abbrnat. The bibliography styles produced by custom-bib are designed from the start to be compatible with natbib.\n"
"\n"
-"date: 2013-04-30 13:48:45 +0000"
+"date: 2012-01-14 10:58:21 +0000"
msgstr ""
-#. description(texlive-sansmathfonts)
-msgid ""
-"Sans serifsmall caps and math fonts for use with Computer Modern.\n"
-"\n"
-"date: 2013-04-28 17:53:22 +0000"
+#. summary(texlive-specs-p:texlive-natbib-doc)
+#, fuzzy
+msgid "Documentation for texlive-natbib"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-natbib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-natbib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-natded)
+msgid "Typeset natural deduction proofs"
msgstr ""
-#. description(texlive-kerkis)
+#. description(texlive-specs-p:texlive-natded)
msgid ""
-"Sans-serif Greek fonts to match the URW Bookman set (which are distributed with Kerkis). The Kerkis font set has some support for mathematics as well as other glyphs missing from the base URW Bookman fonts (the URW fonts are duplicated in the distribution). Macros are provided to use the fonts in OT1, T1 (only NG/ng glyphs missing) and LGR encodings, as well as in mathematics; small caps and old-style number glyphs are also available. The philosophy, and the design process, of the Kerkis fonts is discussed in a paper in TUGboat 23(3/4), 2002.\n"
+"The package provides commands to typeset proofs in the style used by Jaskowski, or that of Kalish and Montague.\n"
"\n"
-"date: 2009-01-15 16:16:29 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-sfmath)
-msgid "Sans-serif mathematics"
-msgstr ""
+#. summary(texlive-specs-p:texlive-natded-doc)
+#, fuzzy
+msgid "Documentation for texlive-natded"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sanskrit)
-msgid "Sanskrit support"
+#. description(texlive-specs-p:texlive-natded-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-natded"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-nath)
+msgid "Natural mathematics notation"
msgstr ""
-#. summary(texlive-savefnmark)
-msgid "Save name of the footnote mark for reuse"
+#. description(texlive-specs-p:texlive-nath)
+msgid ""
+"Nath is a LaTeX (both 2e and 2.09) style to separate presentation and content in mathematical typography. The style delivers a particular context-dependent presentation on the basis of a rather coarse context-independent notation. Highlighted features: depending on the context, the command \\frac produces either built-up or case or solidus fractions, with parentheses added whenever required for preservation of the mathematical meaning; delimiters adapt their size to the material enclosed, rendering \\left and \\right almost obsolete.\n"
+"\n"
+"date: 2012-06-16 08:11:41 +0000"
msgstr ""
-#. summary(texlive-sitem)
-msgid "Save the optional argument of \\item"
+#. summary(texlive-specs-p:texlive-nath-doc)
+#, fuzzy
+msgid "Documentation for texlive-nath"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nath-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-nature)
+msgid "Prepare papers for the journal Nature"
msgstr ""
-#. description(texlive-rectopma)
+#. description(texlive-specs-p:texlive-nature)
msgid ""
-"Saves the arguments of \\author and \\title for reference (after \\maketitle) in a document. (\\maketitle simply disposes of the information, in the standard classes and some others.)\n"
+"Nature does not accept papers in LaTeX, but it does accept PDF. This class and BibTeX style provide what seems to be necessary to produce papers in a format acceptable to the publisher.\n"
"\n"
-"date: 2010-10-02 15:24:09 +0000"
+"date: 2012-05-28 13:56:23 +0000"
msgstr ""
-#. summary(texlive-scale)
-msgid "Scale document by sqrt(2) or magstep(2)"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nature-doc)
+#, fuzzy
+msgid "Documentation for texlive-nature"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tetex)
-msgid "Scripts and files originally written for or included in teTeX"
-msgstr ""
+#. description(texlive-specs-p:texlive-nature-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nature"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(yast2-devtools)
-msgid "Scripts and templates for developing YaST2 modules and components."
+#. summary(texlive-specs-p:texlive-navigator)
+msgid "PDF features across formats and engines"
msgstr ""
-#. description(yast2-devtools:yast2-buildtools)
-msgid "Scripts and templates required for rebuilding the existing YaST2 modules and components (both ruby and C++)."
+#. description(texlive-specs-p:texlive-navigator)
+msgid ""
+"Navigator implements PDF features for all formats (with some limitations in ConTeXt) with PDFTeX, LuaTeX and XeTeX (i.e. xdvipdfmx). Features include: Customizable outlines (i.e. bookmarks); Anchors; Links and actions (e.g. JavaScript or user-defined PDF actions); File embedding (not in ConTeXt); Document information and PDF viewer's display (not in ConTeXt); and Commands to create and use raw PDF objects. Navigator requires texapi and yax, both version at least 1.03.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-seasonal)
-msgid "Seasonal stamps collection for Tux Paint"
-msgstr ""
+#. summary(texlive-specs-p:texlive-navigator-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-navigator"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-tocvsec2)
-msgid "Section numbering and table of contents control"
-msgstr ""
+#. description(texlive-specs-p:texlive-navigator-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-navigator"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-secdot)
-msgid "Section numbers with trailing dots"
-msgstr ""
+#. summary(texlive-specs-p:texlive-ncclatex)
+#, fuzzy
+msgid "An extended general-purpose class"
+msgstr "Hardwarová knihovna"
-#. description(texlive-sectionbox)
+#. description(texlive-specs-p:texlive-ncclatex)
msgid ""
-"Sectionbox is a LaTeX package for putting fancy colored boxes around sections, subsections, and subsubsections, especially for use in posters, etc. It was designed with the sciposter class in mind, and certainly works with that class and with derived classes.\n"
+"The ncc class provides a framework for a common class to replace the standard article, book and report classes, and providing a \"preprint\" class. The class's extensions are provided in a number of small packages, some of which may also be used with the standard classes. The ncclatex package also loads many of the packages of, and requires the latest version of the ncctools bundle.\n"
"\n"
-"date: 2007-02-26 20:24:31 +0000"
+"date: 2012-02-25 10:15:03 +0000"
msgstr ""
-#. description(texlive-xetex)
+#. summary(texlive-specs-p:texlive-ncclatex-doc)
+#, fuzzy
+msgid "Documentation for texlive-ncclatex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-ncclatex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ncclatex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-ncctools)
+#, fuzzy
+msgid "A collection of general packages for LaTeX"
+msgstr "Sbírka německých šablon pro OpenOffice.org."
+
+#. description(texlive-specs-p:texlive-ncctools)
msgid ""
-"See http://tug.org/xetex.\n"
+"The NCCtools bundle contains many packages for general use under LaTeX; many are also used by NCC LaTeX. The bundle includes tools for: executing commands after a package is loaded; watermarks; counter manipulation (dynamic counters, changing counter numbering with another counter); improvements to the description environment; hyphenation of compound words; new levels of footnotes; space-filling patterns; \"poor man's\" Black Board Bold symbols; alignment of the content of a box; use comma as decimal separator; boxes with their own crop marks; page cropmarks; improvements to fancy headers; float \"styles\", mini floats, side floats; manually marked footnotes; extension of amsmath; control of paragraph skip; an envelope to the graphicx package; dashed and multiple rules; alternative techniques for declarations of sections, captions, and toc- entries; generalised text-stretching; generation of new theorem-like environments; control of the text area; centred page layouts; and un-numbe
red top-level section.\n"
"\n"
-"date: 2013-02-01 17:09:07 +0000"
+"date: 2013-12-16 17:11:57 +0000"
msgstr ""
-#. summary(texlive-typeface)
-msgid "Select a balanced set of fonts"
-msgstr ""
+#. summary(texlive-specs-p:texlive-ncctools-doc)
+#, fuzzy
+msgid "Documentation for texlive-ncctools"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-titlesec)
-msgid "Select alternative section titles"
-msgstr ""
+#. description(texlive-specs-p:texlive-ncctools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ncctools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-selectp)
-msgid "Select pages to be output"
+#. summary(texlive-specs-p:texlive-ncntrsbk-fonts)
+msgid "Severed fonts for texlive-ncntrsbk"
msgstr ""
-#. description(vim-plugins:vim-plugin-colorschemes)
-msgid "Selection of vim color schemes based on Colors Sample Pack - http://www.vim.org/scripts/script.php?script_id=625."
+#. description(texlive-specs-p:texlive-ncntrsbk-fonts)
+msgid "The separated fonts package for texlive-ncntrsbk"
msgstr ""
-#. summary(texlive-silence)
-msgid "Selective filtering of error messages and warnings"
+#. summary(texlive-specs-p:texlive-nddiss)
+msgid "Notre Dame Dissertation format class"
msgstr ""
-#. summary(texlive-selnolig)
-msgid "Selectively disable typographic ligatures"
+#. description(texlive-specs-p:texlive-nddiss)
+msgid ""
+"This class file conforms to the requirements of the Graduate School of the University of Notre Dame; with it a user can format a thesis or dissertation in LaTeX.\n"
+"\n"
+"date: 2012-07-17 14:43:33 +0000"
msgstr ""
-#. summary(texlive-semaphor)
-msgid "Semaphore alphabet font"
+#. summary(texlive-specs-p:texlive-nddiss-doc)
+#, fuzzy
+msgid "Documentation for texlive-nddiss"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nddiss-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nddiss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-needspace)
+msgid "Insert pagebreak if not enough space"
msgstr ""
-#. description(texlive-venturisadf)
+#. description(texlive-specs-p:texlive-needspace)
msgid ""
-"Serif and sans serif complete text font families, in both Adobe Type 1 and OpenType formats for publication. The family is based on Utopia family, and has been modified and developed by the Arkandis Digital foundry. Support for using the fonts, in LaTeX, is also provided (and makes use of the nfssext-cfr package).\n"
+"Provides commands to disable pagebreaking within a given vertical space. If there is not enough space between the command and the bottom of the page, a new page will be started.\n"
"\n"
-"date: 2010-07-12 20:26:03 +0000"
+"date: 2013-04-02 11:01:06 +0000"
msgstr ""
-#. summary(texlive-lxfonts)
-msgid "Set of slide fonts based on CM"
-msgstr ""
+#. summary(texlive-specs-p:texlive-needspace-doc)
+#, fuzzy
+msgid "Documentation for texlive-needspace"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-interfaces)
-msgid "Set parameters for other packages, conveniently"
-msgstr ""
+#. description(texlive-specs-p:texlive-needspace-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-needspace"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-setspace)
-msgid "Set space between lines"
+#. summary(texlive-specs-p:texlive-nestquot)
+msgid "Alternate quotes between double and single with nesting"
msgstr ""
-#. summary(texlive-relsize)
-msgid "Set the font size relative to the current font size"
+#. description(texlive-specs-p:texlive-nestquot)
+msgid ""
+"Provides two new commands: \\nlq and \\nrq for nesting left and right quotes that properly change between double and single quotes according to their nesting level. For example, the input \\nlq Foo \\nlq bar\\nrq\\ bletch\\nrq will be typeset as if it had been entered as \"Foo 'bar' bletch\".\n"
+"\n"
+"date: 2012-08-13 10:34:19 +0000"
msgstr ""
-#. summary(texlive-zxjafont)
-msgid "Set up Japanese font families for XeLaTeX"
+#. summary(texlive-specs-p:texlive-neuralnetwork)
+msgid "Graph-drawing for neural networks"
msgstr ""
-#. summary(texlive-vmargin)
-msgid "Set various page dimensions"
+#. description(texlive-specs-p:texlive-neuralnetwork)
+msgid ""
+"The package provides facilities for graph-drawing, with facilities designed for neural network diagrams.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-titlecaps)
-msgid "Setting rich-text input into Titling Caps"
-msgstr ""
+#. summary(texlive-specs-p:texlive-neuralnetwork-doc)
+#, fuzzy
+msgid "Documentation for texlive-neuralnetwork"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-textpath)
-msgid "Setting text along a path with MetaPost"
-msgstr ""
+#. description(texlive-specs-p:texlive-neuralnetwork-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-neuralnetwork"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ibygrk:texlive-ibygrk-fonts)
-msgid "Severed fonts for texlive-ibygrk"
+#. summary(texlive-specs-p:texlive-newcommand)
+msgid "Generate new LaTeX command definitions"
msgstr ""
-#. summary(texlive-inconsolata:texlive-inconsolata-fonts)
-msgid "Severed fonts for texlive-inconsolata"
+#. description(texlive-specs-p:texlive-newcommand)
+msgid ""
+"Generating any other than the simple \\newcommand-style commands, in LaTeX, is tedious (in the least). This script allows the specification of commands in a 'natural' style; the script then generates macros to define the command.\n"
+"\n"
+"date: 2012-06-06 16:43:10 +0000"
msgstr ""
-#. summary(texlive-initials:texlive-initials-fonts)
-msgid "Severed fonts for texlive-initials"
+#. summary(texlive-specs-p:texlive-newenviron)
+msgid "Processing an environment's body"
msgstr ""
-#. summary(texlive-ipaex:texlive-ipaex-fonts)
-msgid "Severed fonts for texlive-ipaex"
+#. description(texlive-specs-p:texlive-newenviron)
+msgid ""
+"The package offers tools for collecting and executing an environment's body.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ipaex-type1:texlive-ipaex-type1-fonts)
+#. summary(texlive-specs-p:texlive-newenviron-doc)
#, fuzzy
-msgid "Severed fonts for texlive-ipaex-type1"
+msgid "Documentation for texlive-newenviron"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-iwona:texlive-iwona-fonts)
-msgid "Severed fonts for texlive-iwona"
-msgstr ""
+#. description(texlive-specs-p:texlive-newenviron-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newenviron"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-jmn:texlive-jmn-fonts)
-msgid "Severed fonts for texlive-jmn"
+#. summary(texlive-specs-p:texlive-newfile)
+msgid "User level management of LaTeX input and output"
msgstr ""
-#. summary(texlive-junicode:texlive-junicode-fonts)
-msgid "Severed fonts for texlive-junicode"
+#. description(texlive-specs-p:texlive-newfile)
+msgid ""
+"Commands are defined to manage the limited pool of input and output handles provided by TeX. The streams so provided are mapped to various of the LaTeX input and output mechanisms. Some facilities of the verbatim package are also mapped.\n"
+"\n"
+"date: 2012-06-25 21:32:47 +0000"
msgstr ""
-#. summary(texlive-kerkis:texlive-kerkis-fonts)
-msgid "Severed fonts for texlive-kerkis"
-msgstr ""
+#. summary(texlive-specs-p:texlive-newfile-doc)
+#, fuzzy
+msgid "Documentation for texlive-newfile"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-knitting:texlive-knitting-fonts)
-msgid "Severed fonts for texlive-knitting"
+#. description(texlive-specs-p:texlive-newfile-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newfile"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-newlfm)
+msgid "Write letters, facsimiles, and memos"
msgstr ""
-#. summary(texlive-kpfonts:texlive-kpfonts-fonts)
-msgid "Severed fonts for texlive-kpfonts"
+#. description(texlive-specs-p:texlive-newlfm)
+msgid ""
+"Integrates the letter class with fancyhdr and geometry to automatically make letterhead stationery. Useful for writing letters, fax, and memos. You can set up an address book using 'wrapper' macros. You put all the information for a person into a wrapper and then put the wrapper in a document. The class handles letterheads automatically. You place the object for the letterhead (picture, information, etc.) in a box and all sizing is set automatically.\n"
+"\n"
+"date: 2011-09-13 13:49:34 +0000"
msgstr ""
-#. summary(texlive-kurier:texlive-kurier-fonts)
-msgid "Severed fonts for texlive-kurier"
+#. summary(texlive-specs-p:texlive-newlfm-doc)
+#, fuzzy
+msgid "Documentation for texlive-newlfm"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-newlfm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newlfm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-newpx)
+msgid "Alternative uses of the PX fonts, with improved metrics"
msgstr ""
-#. summary(texlive-lato:texlive-lato-fonts)
-msgid "Severed fonts for texlive-lato"
+#. description(texlive-specs-p:texlive-newpx)
+msgid ""
+"The package, based on pxfonts, provides many fixes and enhancements to that package, and splits it in two parts (newpxtext and newpxmath) which may be run independently of one another. It provides scaling, improved metrics, and other options. For proper operation, the packages require that the packages newtxmath and txfonts be installed and their map files enabled.\n"
+"\n"
+"date: 2014-04-05 07:51:45 +0000"
msgstr ""
-#. summary(texlive-libertine:texlive-libertine-fonts)
+#. summary(texlive-specs-p:texlive-newpx-doc)
#, fuzzy
-msgid "Severed fonts for texlive-libertine"
+msgid "Documentation for texlive-newpx"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-librebaskerville:texlive-librebaskerville-fonts)
+#. description(texlive-specs-p:texlive-newpx-doc)
#, fuzzy
-msgid "Severed fonts for texlive-librebaskerville"
+msgid "This package includes the documentation for texlive-newpx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-newpx-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-newpx"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-libris:texlive-libris-fonts)
-msgid "Severed fonts for texlive-libris"
-msgstr ""
+#. description(texlive-specs-p:texlive-newpx-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-newpx"
+msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-linearA:texlive-linearA-fonts)
-msgid "Severed fonts for texlive-linearA"
+#. summary(texlive-specs-p:texlive-newsletr)
+msgid "Macros for making newsletters with Plain TeX"
msgstr ""
-#. summary(texlive-lm:texlive-lm-fonts)
-msgid "Severed fonts for texlive-lm"
+#. description(texlive-specs-p:texlive-newsletr)
+msgid ""
+"The newsletr package\n"
+"\n"
+"date: 2012-07-17 15:50:51 +0000"
msgstr ""
-#. summary(texlive-lm-math:texlive-lm-math-fonts)
+#. summary(texlive-specs-p:texlive-newsletr-doc)
#, fuzzy
-msgid "Severed fonts for texlive-lm-math"
+msgid "Documentation for texlive-newsletr"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lxfonts:texlive-lxfonts-fonts)
-msgid "Severed fonts for texlive-lxfonts"
-msgstr ""
+#. description(texlive-specs-p:texlive-newsletr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newsletr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-manfnt:texlive-manfnt-fonts)
-msgid "Severed fonts for texlive-manfnt"
+#. summary(texlive-specs-p:texlive-newspaper)
+msgid "Typeset newsletters to resemble newspapers"
msgstr ""
-#. summary(texlive-marvosym:texlive-marvosym-fonts)
-msgid "Severed fonts for texlive-marvosym"
+#. description(texlive-specs-p:texlive-newspaper)
+msgid ""
+"The newspaper package redefines the page style and \\maketitle command to produce a typeset page similar to that of a newspaper. It also provides several commands that (when used with other packages) simplify the writing of articles in a newspaper-style column format.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mathabx-type1:texlive-mathabx-type1-fonts)
-msgid "Severed fonts for texlive-mathabx-type1"
-msgstr ""
+#. summary(texlive-specs-p:texlive-newspaper-doc)
+#, fuzzy
+msgid "Documentation for texlive-newspaper"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mathdesign:texlive-mathdesign-fonts)
-msgid "Severed fonts for texlive-mathdesign"
-msgstr ""
+#. description(texlive-specs-p:texlive-newspaper-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newspaper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mathpazo:texlive-mathpazo-fonts)
-msgid "Severed fonts for texlive-mathpazo"
+#. summary(texlive-specs-p:texlive-newtx)
+msgid "Alternative uses of the TX fonts, with improved metrics"
msgstr ""
-#. summary(texlive-mdsymbol:texlive-mdsymbol-fonts)
-msgid "Severed fonts for texlive-mdsymbol"
+#. description(texlive-specs-p:texlive-newtx)
+msgid ""
+"The bundle splits txfonts.sty (from the TX fonts distribution) into two independent packages, ntxtext.sty and ntxmath.sty, each with fixes and enhancements. Ntxmath's metrics have been re-evaluated to provide a less tight appearance, and to provide a libertine option that substitutes Libertine italic and Greek letter for the existing math italic and Greek glyphs, making a mathematics package that matches Libertine text quite well. Ntxmath can also use the maths italic font provided with the garamondx package, thus offering a garamond-alike text-with- maths combination.\n"
+"\n"
+"date: 2014-05-16 22:56:42 +0000"
msgstr ""
-#. summary(texlive-metapost:texlive-metapost-fonts)
-msgid "Severed fonts for texlive-metapost"
-msgstr ""
+#. summary(texlive-specs-p:texlive-newtx-doc)
+#, fuzzy
+msgid "Documentation for texlive-newtx"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mflogo:texlive-mflogo-fonts)
-msgid "Severed fonts for texlive-mflogo"
+#. description(texlive-specs-p:texlive-newtx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newtx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-newtx-fonts)
+msgid "Severed fonts for texlive-newtx"
msgstr ""
-#. summary(texlive-mnsymbol:texlive-mnsymbol-fonts)
-msgid "Severed fonts for texlive-mnsymbol"
+#. description(texlive-specs-p:texlive-newtx-fonts)
+msgid "The separated fonts package for texlive-newtx"
msgstr ""
-#. summary(texlive-montex:texlive-montex-fonts)
-msgid "Severed fonts for texlive-montex"
+#. summary(texlive-specs-p:texlive-newtxtt)
+msgid "Enhancement of typewriter fonts from newtx"
msgstr ""
-#. summary(texlive-musixtex-fonts:texlive-musixtex-fonts-fonts)
-msgid "Severed fonts for texlive-musixtex-fonts"
+#. description(texlive-specs-p:texlive-newtxtt)
+msgid ""
+"The package provides enhanced fonts with LaTeX support files providing access to the typewriter fonts from newtx. Regular and bold weights, slanted variants and a choice of four different styles for zero.\n"
+"\n"
+"date: 2014-05-06 13:51:33 +0000"
msgstr ""
-#. summary(texlive-mxedruli:texlive-mxedruli-fonts)
+#. summary(texlive-specs-p:texlive-newtxtt-doc)
#, fuzzy
-msgid "Severed fonts for texlive-mxedruli"
+msgid "Documentation for texlive-newtxtt"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-nanumtype1:texlive-nanumtype1-fonts)
+#. description(texlive-specs-p:texlive-newtxtt-doc)
#, fuzzy
-msgid "Severed fonts for texlive-nanumtype1"
+msgid "This package includes the documentation for texlive-newtxtt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-newtxtt-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-newtxtt"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-newtxtt-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-newtxtt"
msgstr "Vývojářský balík pro libstroke"
-#. summary(texlive-ncntrsbk:texlive-ncntrsbk-fonts)
-msgid "Severed fonts for texlive-ncntrsbk"
+#. summary(texlive-specs-p:texlive-newunicodechar)
+msgid "Definitions of the meaning of Unicode characters"
msgstr ""
-#. summary(texlive-newpx:texlive-newpx-fonts)
+#. description(texlive-specs-p:texlive-newunicodechar)
+msgid ""
+"The package provides a friendly interface for defining the meaning of Unicode characters. The document should be processed by (pdf)LaTeX with the unicode option of inputenc or inputenx, or by XeLaTeX/LuaLaTeX. The command provided is \\newunicodechar{<char>}{<code>} where <char> is a directly- typed Unicode character, and <code> is its replacement.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-p:texlive-newunicodechar-doc)
#, fuzzy
-msgid "Severed fonts for texlive-newpx"
+msgid "Documentation for texlive-newunicodechar"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-newtx:texlive-newtx-fonts)
-msgid "Severed fonts for texlive-newtx"
-msgstr ""
+#. description(texlive-specs-p:texlive-newunicodechar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newunicodechar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ocherokee:texlive-ocherokee-fonts)
-msgid "Severed fonts for texlive-ocherokee"
+#. summary(texlive-specs-p:texlive-newvbtm)
+msgid "Define your own verbatim-like environment"
msgstr ""
-#. summary(texlive-ocr-b-outline:texlive-ocr-b-outline-fonts)
-msgid "Severed fonts for texlive-ocr-b-outline"
+#. description(texlive-specs-p:texlive-newvbtm)
+msgid ""
+"Defines general purpose macro named \\newverbatim to define your own verbatim-like environment. It also has a supplementary style file varvbtm.sty to provide set of macros for variants of verbatim, such as tab emulation.\n"
+"\n"
+"date: 2011-09-23 13:58:32 +0000"
msgstr ""
-#. summary(texlive-oinuit:texlive-oinuit-fonts)
-msgid "Severed fonts for texlive-oinuit"
-msgstr ""
+#. summary(texlive-specs-p:texlive-newvbtm-doc)
+#, fuzzy
+msgid "Documentation for texlive-newvbtm"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-oldstandard:texlive-oldstandard-fonts)
-msgid "Severed fonts for texlive-oldstandard"
-msgstr ""
+#. description(texlive-specs-p:texlive-newvbtm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newvbtm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-omega:texlive-omega-fonts)
-msgid "Severed fonts for texlive-omega"
+#. summary(texlive-specs-p:texlive-newverbs)
+msgid "Define new versions of \\verb, including short verb versions"
msgstr ""
-#. summary(texlive-opensans:texlive-opensans-fonts)
-msgid "Severed fonts for texlive-opensans"
+#. description(texlive-specs-p:texlive-newverbs)
+msgid ""
+"The package allows the definition of \\verb variants which add TeX code before and after the verbatim text (e.g., quotes or surrounding \\fbox{}). When used together with the shortvrb package it allows the definition of short verbatim characters which use this package's variant instead of the normal \\verb. In addition, it is possible to collect an argument verbatim to either typeset or write it into a file. The \\Verbdef command defines verbatim text to a macro which can later be used to write the verbatim text to a file.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-palatino:texlive-palatino-fonts)
-msgid "Severed fonts for texlive-palatino"
-msgstr ""
+#. summary(texlive-specs-p:texlive-newverbs-doc)
+#, fuzzy
+msgid "Documentation for texlive-newverbs"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-paratype:texlive-paratype-fonts)
-msgid "Severed fonts for texlive-paratype"
-msgstr ""
+#. description(texlive-specs-p:texlive-newverbs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-newverbs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-persian-modern:texlive-persian-modern-fonts)
-msgid "Severed fonts for texlive-persian-modern"
+#. summary(texlive-specs-p:texlive-nextpage)
+msgid "Generalisations of the page advance commands"
msgstr ""
-#. summary(texlive-phaistos:texlive-phaistos-fonts)
-msgid "Severed fonts for texlive-phaistos"
+#. description(texlive-specs-p:texlive-nextpage)
+msgid ""
+"Provides \\clearpage and \\newpage variants that guarantee to end up on even/odd numbered pages; these 4 commands all have an optional argument whose content will be placed on any \"empty\" page generated.\n"
+"\n"
+"date: 2012-07-18 15:56:32 +0000"
msgstr ""
-#. summary(texlive-philokalia:texlive-philokalia-fonts)
-msgid "Severed fonts for texlive-philokalia"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nfssext-cfr)
+#, fuzzy
+msgid "Extensions to the LaTeX NFSS"
+msgstr "SSL rozšíření k perl-ladp"
-#. summary(texlive-pigpen:texlive-pigpen-fonts)
-msgid "Severed fonts for texlive-pigpen"
+#. description(texlive-specs-p:texlive-nfssext-cfr)
+msgid ""
+"The package is a development of nfssext.sty, distributed with the examples for the font installation guide. The package has been developed for use in packages such as cfr-lm and venturisadf,\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pl:texlive-pl-fonts)
-msgid "Severed fonts for texlive-pl"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nfssext-cfr-doc)
+#, fuzzy
+msgid "Documentation for texlive-nfssext-cfr"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-poltawski:texlive-poltawski-fonts)
-msgid "Severed fonts for texlive-poltawski"
-msgstr ""
+#. description(texlive-specs-p:texlive-nfssext-cfr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nfssext-cfr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-prodint:texlive-prodint-fonts)
-msgid "Severed fonts for texlive-prodint"
+#. summary(texlive-specs-p:texlive-nicefilelist)
+msgid "Provide \\listfiles alignment"
msgstr ""
-#. summary(texlive-ptex:texlive-ptex-fonts)
-msgid "Severed fonts for texlive-ptex"
+#. description(texlive-specs-p:texlive-nicefilelist)
+msgid ""
+"The package extends longnamefilelist, keeping separate columns for date, version and \"caption\" (the caption now separately listed). Alignment is not disturbed by short file name extensions, such as \".fd\". The package is not compatible with longnamefilelist: users need to re-read the documentation.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-punknova:texlive-punknova-fonts)
-msgid "Severed fonts for texlive-punknova"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nicefilelist-doc)
+#, fuzzy
+msgid "Documentation for texlive-nicefilelist"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pxfonts:texlive-pxfonts-fonts)
-msgid "Severed fonts for texlive-pxfonts"
-msgstr ""
+#. description(texlive-specs-p:texlive-nicefilelist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nicefilelist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-quattrocento:texlive-quattrocento-fonts)
-msgid "Severed fonts for texlive-quattrocento"
-msgstr ""
+#. summary(texlive-specs-p:texlive-niceframe)
+#, fuzzy
+#| msgid "XML support for castor"
+msgid "Support for fancy frames"
+msgstr "XML podpora pro castor"
-#. summary(texlive-raleway:texlive-raleway-fonts)
-msgid "Severed fonts for texlive-raleway"
+#. description(texlive-specs-p:texlive-niceframe)
+msgid ""
+"The package defines means of drawing frames around boxes, using dingbat fonts. Some (Metafont) font sources are included; the fonts are available separately in Type 1 format.\n"
+"\n"
+"date: 2012-07-17 15:50:51 +0000"
msgstr ""
-#. summary(texlive-recycle:texlive-recycle-fonts)
-msgid "Severed fonts for texlive-recycle"
-msgstr ""
+#. summary(texlive-specs-p:texlive-niceframe-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-niceframe"
+msgstr "Dokumentace pro digiKam"
-#. summary(texlive-romande:texlive-romande-fonts)
-msgid "Severed fonts for texlive-romande"
-msgstr ""
+#. description(texlive-specs-p:texlive-niceframe-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-niceframe"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-rsfs:texlive-rsfs-fonts)
-msgid "Severed fonts for texlive-rsfs"
+#. summary(texlive-specs-p:texlive-nicetext)
+msgid "Minimal markup for simple text (Wikipedia style) and documentation"
msgstr ""
-#. summary(texlive-sanskrit:texlive-sanskrit-fonts)
-msgid "Severed fonts for texlive-sanskrit"
+#. description(texlive-specs-p:texlive-nicetext)
+msgid ""
+"The bundle offers \"minimal\" markup syntax for various simple kinds of text. The user will typically involve little more than is printed, and will still get LaTeX quality. The bundle provides four packages: wiki addresses general texts, marked up in the simple style used on Wikipedia; niceverb is yet another means of documenting LaTeX packages: it offers syntax-aware typesetting of meta-variables (macro arguments) and for referring to commands (and their syntax) in footnotes, section titles etc.; fifinddo aims to parse plain text or (La)TeX files using TeX, and to write the results to an external file; the package is used by another member of the bundle: makedoc, which provides the means to produce typeset documentation direct from package files.\n"
+"\n"
+"date: 2013-12-16 17:11:57 +0000"
msgstr ""
-#. summary(texlive-sansmathfonts:texlive-sansmathfonts-fonts)
-msgid "Severed fonts for texlive-sansmathfonts"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nicetext-doc)
+#, fuzzy
+msgid "Documentation for texlive-nicetext"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-semaphor:texlive-semaphor-fonts)
-msgid "Severed fonts for texlive-semaphor"
-msgstr ""
+#. description(texlive-specs-p:texlive-nicetext-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nicetext"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-skaknew:texlive-skaknew-fonts)
-msgid "Severed fonts for texlive-skaknew"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nih)
+#, fuzzy
+#| msgid "Fonts for TV Applications"
+msgid "A class for NIH grant applications"
+msgstr "Písma pro TV aplikace"
-#. summary(texlive-sourcecodepro:texlive-sourcecodepro-fonts)
-msgid "Severed fonts for texlive-sourcecodepro"
+#. description(texlive-specs-p:texlive-nih)
+msgid ""
+"The nih class offers support for grant applications to NIH, the National Institutes of Health, a US government agency. The example-* files provide a template for using nih.cls and submitting the biographical sketches the NIH wants. They (potentially) use denselists package, which just reduces list spacing; the package is distributed with the class, but is not part of the class proper. (The examples may be distributed without even the restrictions of the LaTeX licence.)\n"
+"\n"
+"date: 2012-07-17 20:02:06 +0000"
msgstr ""
-#. summary(texlive-sourcesanspro:texlive-sourcesanspro-fonts)
-msgid "Severed fonts for texlive-sourcesanspro"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nih-doc)
+#, fuzzy
+msgid "Documentation for texlive-nih"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-starfont:texlive-starfont-fonts)
-msgid "Severed fonts for texlive-starfont"
-msgstr ""
+#. description(texlive-specs-p:texlive-nih-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nih"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-staves:texlive-staves-fonts)
-msgid "Severed fonts for texlive-staves"
+#. summary(texlive-specs-p:texlive-nkarta)
+msgid "A \"new\" version of the karta cartographic fonts"
msgstr ""
-#. summary(texlive-stix:texlive-stix-fonts)
-msgid "Severed fonts for texlive-stix"
+#. description(texlive-specs-p:texlive-nkarta)
+msgid ""
+"A development of the karta font, offering more mathematical stability in Metafont. A version that will produce the glyphs as Encapsulated PostScript, using MetaPost, is also provided.\n"
+"\n"
+"date: 2014-05-16 22:56:42 +0000"
msgstr ""
-#. summary(texlive-stmaryrd:texlive-stmaryrd-fonts)
-msgid "Severed fonts for texlive-stmaryrd"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nkarta-doc)
+#, fuzzy
+msgid "Documentation for texlive-nkarta"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-superiors:texlive-superiors-fonts)
-msgid "Severed fonts for texlive-superiors"
-msgstr ""
+#. description(texlive-specs-p:texlive-nkarta-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nkarta"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-symbol:texlive-symbol-fonts)
-msgid "Severed fonts for texlive-symbol"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nlctdoc)
+#, fuzzy
+msgid "Package documentation class"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tabvar:texlive-tabvar-fonts)
-msgid "Severed fonts for texlive-tabvar"
+#. description(texlive-specs-p:texlive-nlctdoc)
+msgid ""
+"The class provides support for the documentation of the author's packages, using koma-script. This class is provided \"as is\" solely for the benefit of anyone who wants to compile the documentation of those packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tapir:texlive-tapir-fonts)
-msgid "Severed fonts for texlive-tapir"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nlctdoc-doc)
+#, fuzzy
+msgid "Documentation for texlive-nlctdoc"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tex-gyre:texlive-tex-gyre-fonts)
-msgid "Severed fonts for texlive-tex-gyre"
-msgstr ""
+#. description(texlive-specs-p:texlive-nlctdoc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nlctdoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tex-gyre-math:texlive-tex-gyre-math-fonts)
-msgid "Severed fonts for texlive-tex-gyre-math"
+#. summary(texlive-specs-p:texlive-noconflict)
+msgid "Resolve macro name conflict between packages"
msgstr ""
-#. summary(texlive-tfrupee:texlive-tfrupee-fonts)
-msgid "Severed fonts for texlive-tfrupee"
+#. description(texlive-specs-p:texlive-noconflict)
+msgid ""
+"The package provides several commands to prefix (and hence obscure) a macro's (or a sequence of macros') name, and to restore the original macro(s) at places in a document where they are needed.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-times:texlive-times-fonts)
-msgid "Severed fonts for texlive-times"
+#. summary(texlive-specs-p:texlive-noconflict-doc)
+msgid "Documentation for texlive-noconflict"
msgstr ""
-#. summary(texlive-tipa:texlive-tipa-fonts)
-msgid "Severed fonts for texlive-tipa"
+#. description(texlive-specs-p:texlive-noconflict-doc)
+msgid "This package includes the documentation for texlive-noconflict"
msgstr ""
-#. summary(texlive-trajan:texlive-trajan-fonts)
-msgid "Severed fonts for texlive-trajan"
+#. summary(texlive-specs-p:texlive-noindentafter)
+msgid "Tool to prevent paragraph indentation after environments/macros"
msgstr ""
-#. summary(texlive-txfonts:texlive-txfonts-fonts)
-msgid "Severed fonts for texlive-txfonts"
+#. description(texlive-specs-p:texlive-noindentafter)
+msgid ""
+"The package, as the name suggests, supplies tools to automatically suppress indentations in following paragraphs, specifically those following a particular macro or environment.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-txfontsb:texlive-txfontsb-fonts)
-msgid "Severed fonts for texlive-txfontsb"
-msgstr ""
+#. summary(texlive-specs-p:texlive-noindentafter-doc)
+#, fuzzy
+msgid "Documentation for texlive-noindentafter"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uhc:texlive-uhc-fonts)
-msgid "Severed fonts for texlive-uhc"
-msgstr ""
+#. description(texlive-specs-p:texlive-noindentafter-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-noindentafter"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-umtypewriter:texlive-umtypewriter-fonts)
-msgid "Severed fonts for texlive-umtypewriter"
+#. summary(texlive-specs-p:texlive-noitcrul)
+msgid "Improved underlines in mathematics"
msgstr ""
-#. summary(texlive-utopia:texlive-utopia-fonts)
-msgid "Severed fonts for texlive-utopia"
+#. description(texlive-specs-p:texlive-noitcrul)
+msgid ""
+"The package provides a (maths mode) \\underline variant which doesn't impose italics correction at the end.\n"
+"\n"
+"date: 2012-05-28 13:56:23 +0000"
msgstr ""
-#. summary(texlive-velthuis:texlive-velthuis-fonts)
-msgid "Severed fonts for texlive-velthuis"
-msgstr ""
+#. summary(texlive-specs-p:texlive-noitcrul-doc)
+#, fuzzy
+msgid "Documentation for texlive-noitcrul"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-venturisadf:texlive-venturisadf-fonts)
-msgid "Severed fonts for texlive-venturisadf"
-msgstr ""
+#. description(texlive-specs-p:texlive-noitcrul-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-noitcrul"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-vntex:texlive-vntex-fonts)
-msgid "Severed fonts for texlive-vntex"
+#. summary(texlive-specs-p:texlive-nolbreaks)
+msgid "No line breaks in text"
msgstr ""
-#. summary(texlive-wadalab:texlive-wadalab-fonts)
-msgid "Severed fonts for texlive-wadalab"
+#. description(texlive-specs-p:texlive-nolbreaks)
+msgid ""
+"Use \\nolbreaks{some text} to prevent line breaks in \"some text\". This has the advantage over \\mbox{} that glue (rubber space) remains flexible. Most common cases are handled here (\\linebreak is disabled, for example) but spaces hidden in macros or { } can still create break-points.\n"
+"\n"
+"date: 2012-06-01 09:46:45 +0000"
msgstr ""
-#. summary(texlive-wasy:texlive-wasy-fonts)
-msgid "Severed fonts for texlive-wasy"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nolbreaks-doc)
+#, fuzzy
+msgid "Documentation for texlive-nolbreaks"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xits:texlive-xits-fonts)
-msgid "Severed fonts for texlive-xits"
-msgstr ""
+#. description(texlive-specs-p:texlive-nolbreaks-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nolbreaks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-xypic:texlive-xypic-fonts)
-msgid "Severed fonts for texlive-xypic"
+#. summary(texlive-specs-p:texlive-nomencl)
+msgid "Produce lists of symbols as in nomenclature"
msgstr ""
-#. summary(texlive-yhmath:texlive-yhmath-fonts)
-msgid "Severed fonts for texlive-yhmath"
+#. description(texlive-specs-p:texlive-nomencl)
+msgid ""
+"Produces lists of symbols using the capabilities of the MakeIndex program.\n"
+"\n"
+"date: 2012-05-21 16:33:03 +0000"
msgstr ""
-#. summary(texlive-zapfchan:texlive-zapfchan-fonts)
-msgid "Severed fonts for texlive-zapfchan"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nomencl-doc)
+#, fuzzy
+msgid "Documentation for texlive-nomencl"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-zapfding:texlive-zapfding-fonts)
-msgid "Severed fonts for texlive-zapfding"
-msgstr ""
+#. description(texlive-specs-p:texlive-nomencl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nomencl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-shade)
-msgid "Shade pieces of text"
+#. summary(texlive-specs-p:texlive-nomentbl)
+msgid "Nomenclature typeset in a longtable"
msgstr ""
-#. summary(texlive-shadow)
-msgid "Shadow boxes"
+#. description(texlive-specs-p:texlive-nomentbl)
+msgid ""
+"Nomentbl typeset nomenclatures in a longtable instead of the makeindex style of nomencl. A nomenclature entry may have three arguments: Symbol, description and physical unit.\n"
+"\n"
+"date: 2012-05-21 16:33:03 +0000"
msgstr ""
-#. summary(texlive-shadowtext)
-msgid "Shadowtext"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nomentbl-doc)
+#, fuzzy
+msgid "Documentation for texlive-nomentbl"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pxgreeks)
-msgid "Shape selection for PX fonts Greek letters"
-msgstr ""
+#. description(texlive-specs-p:texlive-nomentbl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nomentbl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-txgreeks)
-msgid "Shape selection for TX fonts Greek letters"
+#. summary(texlive-specs-p:texlive-nonfloat)
+msgid "Non-floating table and figure captions"
msgstr ""
-#. summary(texlive-pdfjam)
-msgid "Shell scripts interfacing to pdfpages"
+#. description(texlive-specs-p:texlive-nonfloat)
+msgid ""
+"Adjusts the figure and table environments to ensure that centered objects as one line captions are centered as well. Also the vertical spaces for table captions above the table are changed.\n"
+"\n"
+"date: 2012-05-21 16:33:03 +0000"
msgstr ""
-#. summary(texlive-lshort-french)
-msgid "Short introduction to LaTeX, French translation"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nonfloat-doc)
+#, fuzzy
+msgid "Documentation for texlive-nonfloat"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-lshort-spanish)
-msgid "Short introduction to LaTeX, Spanish translation"
-msgstr ""
+#. description(texlive-specs-p:texlive-nonfloat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nonfloat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-lshort-mongol)
-msgid "Short introduction to LaTeX, in Mongolian"
+#. summary(texlive-specs-p:texlive-nonumonpart)
+msgid "Prevent page numbers on part pages"
msgstr ""
-#. summary(texlive-proba)
-msgid "Shortcuts commands to symbols used in probability texts"
+#. description(texlive-specs-p:texlive-nonumonpart)
+msgid ""
+"The package bundles the answer to the long-standing FAQ about removing page numbers on \\part pages. The package accepts no options and defines no user commands; the user needs only to load it, and the requirement is met.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ushort)
-msgid "Shorter (and longer) underlines and underbars"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nonumonpart-doc)
+#, fuzzy
+msgid "Documentation for texlive-nonumonpart"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-upquote)
-msgid "Show \"realistic\" quotes in verbatim"
-msgstr ""
+#. description(texlive-specs-p:texlive-nonumonpart-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nonumonpart"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-showhyphens)
-msgid "Show all possible hyphenations in LuaLaTeX"
+#. summary(texlive-specs-p:texlive-nopageno)
+msgid "No page numbers in LaTeX documents"
msgstr ""
-#. description(vim-plugins:vim-plugin-diffchanges)
-msgid "Show changes made to current buffer since the last save. This plugin is based from an example in the Hacking Vim book. The differences are that this functionality is in the form of a plugin, is a bit more robust, and can be toggled."
+#. description(texlive-specs-p:texlive-nopageno)
+msgid ""
+"LaTeX's standard styles use two page styles, one on normal pages and one on 'opening' pages with \\maketitle or \\chapter, etc. Unfortunately there is only easy access to changing one of these two so if you want something other than 'plain' on the opening pages you must use \\thispagestyle on each such page. The fancyhdr package does provide a more flexible interface, but if you just want an empty page style on all pages then this package will do the job.\n"
+"\n"
+"date: 2012-06-09 10:09:52 +0000"
msgstr ""
-#. summary(vim-plugins:vim-plugin-diffchanges)
-msgid "Show changes since the last save"
+#. summary(texlive-specs-p:texlive-nopageno-doc)
+#, fuzzy
+msgid "Documentation for texlive-nopageno"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nopageno-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nopageno"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-norasi-c90)
+msgid "TeX support (from CJK) for the norasi font"
msgstr ""
-#. summary(texlive-showcharinbox)
-msgid "Show characters inside a box"
+#. description(texlive-specs-p:texlive-norasi-c90)
+msgid "The norasi-c90 package"
msgstr ""
-#. summary(vim-plugins:vim-plugin-gitdiff)
-msgid "Show git diff in a split window"
+#. summary(texlive-specs-p:texlive-nostarch)
+msgid "LaTeX class for No Starch Press"
msgstr ""
-#. summary(texlive-showlabels)
-msgid "Show label commands in the margin"
+#. description(texlive-specs-p:texlive-nostarch)
+msgid ""
+"The package provides the \"official\" LaTeX style for No Starch Press. Provided are a class, a package for interfacing to hyperref and an index style file. The style serves both for printed and for electronic books.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-showmarks)
-msgid "ShowMarks provides a visual representation of the location marks. Marks are useful for jumping back and forth between interesting points in a buffer, but can be hard to keep track of without any way to see where you have placed them. ShowMarks hopefully makes life easier by placing a sign in the leftmost column of the buffer. The sign indicates the label of the mark and its location. It can be toggled on and off and individual marks can be hidden."
+#. summary(texlive-specs-p:texlive-nostarch-doc)
+#, fuzzy
+msgid "Documentation for texlive-nostarch"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nostarch-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nostarch"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-notes)
+msgid "Mark sections of a document"
msgstr ""
-#. summary(texlive-simplecd)
-msgid "Simple CD, DVD covers for printing"
+#. description(texlive-specs-p:texlive-notes)
+msgid ""
+"The package provides environments to highlight significant portions of text within a document, by putting the text in a box and adding an icon in the margin. (The icons are provided as 'fig' sources, processable by xfig.)\n"
+"\n"
+"date: 2012-06-09 10:09:52 +0000"
msgstr ""
-#. summary(texlive-simplewick)
+#. summary(texlive-specs-p:texlive-notes-doc)
#, fuzzy
-msgid "Simple Wick contractions"
-msgstr "Nástroj pro konfiguraci GNOME 2.x"
+msgid "Documentation for texlive-notes"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-keycommand)
-msgid "Simple creation of commands with key-value arguments"
+#. description(texlive-specs-p:texlive-notes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-notes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-notes2bib)
+msgid "Integrating notes into the bibliography"
msgstr ""
-#. summary(texlive-pst-qtree)
-msgid "Simple syntax for trees"
+#. description(texlive-specs-p:texlive-notes2bib)
+msgid ""
+"The package defines a new type of note, bibnote, which will always be added to the bibliography. The package allows footnotes and endnotes to be moved into the bibliography in the same way. The package can be used with natbib and biblatex as well as plain LaTeX citations. Both sorted and unsorted bibliography styles are supported. The package uses the LaTeX 3 macros and the associated xpackages bundle. It also makes use of the e-TeX extensions (any post-2005 LaTeX distribution will provide these by default, but users of older systems may need to use an elatex command or equivalent). The package relies on LaTeX 3 support from the l3kernel and l3packages bundles.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-spanglish)
+#. summary(texlive-specs-p:texlive-notes2bib-doc)
#, fuzzy
-msgid "Simplified Spanish support for Babel"
-msgstr "XML podpora pro castor"
+msgid "Documentation for texlive-notes2bib"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-parskip)
+#. description(texlive-specs-p:texlive-notes2bib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-notes2bib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-notoccite)
+msgid "Prevent trouble from citations in table of contents, etcetera"
+msgstr ""
+
+#. description(texlive-specs-p:texlive-notoccite)
msgid ""
-"Simply changing \\parskip and \\parindent leaves a layout that is untidy; this package (though it is no substitute for a properly-designed class) helps alleviate this untidiness\n"
+"If you have \\cite commands in \\section-like commands, or in \\caption, the citation will also appear in the table of contents, or list of whatever. If you are also using an unsrt- like bibliography style, these citations will come at the very start of the bibliography, which is confusing. This package suppresses the effect.\n"
"\n"
-"date: 2010-09-30 12:11:14 +0000"
+"date: 2012-06-09 10:09:52 +0000"
msgstr ""
-#. summary(texlive-wordlike)
-msgid "Simulating word processor layout"
+#. summary(texlive-specs-p:texlive-notoccite-doc)
+#, fuzzy
+msgid "Documentation for texlive-notoccite"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-notoccite-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-notoccite"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-nowidow)
+msgid "Avoid widows"
msgstr ""
-#. summary(texlive-pst-am)
-msgid "Simulation of modulation and demodulation"
+#. description(texlive-specs-p:texlive-nowidow)
+msgid ""
+"This package provides a useful macro to manage widow lines.\n"
+"\n"
+"date: 2012-06-09 10:09:52 +0000"
msgstr ""
-#. summary(texlive-uwmslide)
-msgid "Slides with a simple Power Point like appearance"
+#. summary(texlive-specs-p:texlive-nowidow-doc)
+#, fuzzy
+msgid "Documentation for texlive-nowidow"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nowidow-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nowidow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-nox)
+msgid "Adaptable tables"
msgstr ""
-#. summary(texlive-lshort-slovak)
-msgid "Slovak introduction to LaTeX"
+#. description(texlive-specs-p:texlive-nox)
+msgid ""
+"The package allows data, text (including (La)TeX commands or environments) to be formatted into a array which may be split.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-lshort-slovenian)
+#. summary(texlive-specs-p:texlive-nox-doc)
#, fuzzy
-#| msgid "Slovenian Translations for KDE"
-msgid "Slovenian translation of lshort"
-msgstr "Slovinské překlady pro KDE"
+msgid "Documentation for texlive-nox"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-filesystem:texlive-scheme-small)
-msgid "Small scheme (basic + xetex, metapost, a few languages)"
-msgstr ""
+#. description(texlive-specs-p:texlive-nox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pst-ode)
-msgid "Solving initial value problems for sets of Ordinary Differential Equations"
+#. summary(texlive-specs-p:texlive-nrc)
+msgid "Class for the NRC technical journals"
msgstr ""
-#. description(texlive-ushort)
+#. description(texlive-specs-p:texlive-nrc)
msgid ""
-"Some engineers need underlined or twice underlined variables for which the usual \\underline is too long. This package provides a generic command for creating underlines of various sizes and types.\n"
+"Macros, and some documentation, for typesetting papers for submission to journals published by the National Research Council Research Press. At present, only nrc2.cls (for two- column layout) should be used.\n"
"\n"
-"date: 2008-02-29 18:54:55 +0000"
+"date: 2013-02-05 14:37:49 +0000"
msgstr ""
-#. summary(texlive-tikzsymbols)
-msgid "Some symbols created using TikZ"
+#. summary(texlive-specs-p:texlive-nrc-doc)
+#, fuzzy
+msgid "Documentation for texlive-nrc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-nrc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nrc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-ntgclass)
+msgid "\"European\" versions of standard classes"
msgstr ""
-#. description(xdmsc)
+#. description(texlive-specs-p:texlive-ntgclass)
msgid ""
-"Some useful scripts for using SuSE Linux as an X terminal.\n"
+"The bundle offers versions of the standard LaTeX article and report classes, rewritten to reflect a more European design, and the a4 package, which is better tuned to the shape of a4 paper than is the a4paper class option of the standard classes. The classes include several for article and report requirements, and a letter class. The elements of the bundle were designed by members of the Dutch TeX Users Group NTG.\n"
"\n"
-"You will find the documentation in the following directory\n"
-"\n"
-"/usr/share/doc/packages/xdmsc/"
+"date: 2012-07-17 09:53:13 +0000"
msgstr ""
-#. description(texlive-subeqn)
+#. summary(texlive-specs-p:texlive-ntgclass-doc)
+#, fuzzy
+msgid "Documentation for texlive-ntgclass"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-p:texlive-ntgclass-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ntgclass"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-ntheorem)
+#, fuzzy
+#| msgid "Korn Shell development environment"
+msgid "Enhanced theorem environment"
+msgstr "Vývojové prostředí Korn Shell"
+
+#. description(texlive-specs-p:texlive-ntheorem)
msgid ""
-"Sometimes it is necessary to be able to refer to subexpressions of an equation. In order to do that these subexpressions should be numbered. In standard LaTeX there is no provision for this. To solve this problem Stephen Gildea once wrote subeqn.sty for LaTeX 2.09; Donald Arsenau rewrote the macros and Johannes Braams made them available for LaTeX2e. Note that this package is not compatible with the package subeqnarray (written by Johannes Braams), but it can be used together with the LaTeX class options leqno and fleqn.\n"
+"The package offers enhancements for theorem-like environments: easier control of layout; proper placement of endmarks even when the environment ends with \\end{enumerate} or \\end{displaymath} (including support for amsmath displayed- equation environments); and support for making a list of theorems, analagous to \\listoffigures.\n"
"\n"
-"date: 2007-01-14 23:27:07 +0000"
+"date: 2014-01-13 12:29:15 +0000"
msgstr ""
-#. description(texlive-savefnmark)
+#. summary(texlive-specs-p:texlive-ntheorem-doc)
+#, fuzzy
+msgid "Documentation for texlive-ntheorem"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-ntheorem-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ntheorem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-ntheorem-vn)
+#, fuzzy
+msgid "Vietnamese translation of documentation of ntheorem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. description(texlive-specs-p:texlive-ntheorem-vn)
+#, fuzzy
msgid ""
-"Sometimes the same footnote applies to more than one location in a table. With this package the mark of a footnote can be saved into a name, and re-used subsequently without creating another footnote at the bottom.\n"
+"This is a translation of the documentation provided with ntheorem.\n"
"\n"
-"date: 2007-01-14 14:20:52 +0000"
-msgstr ""
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-itnumpar)
+#. summary(texlive-specs-p:texlive-nuc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Notation for nuclear isotopes"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-p:texlive-nuc)
msgid ""
-"Sometimes we need to say \"Capitolo primo\" or \"Capitolo uno\" instead of \"Capitolo 1\", that is, spelling the number in words instead of the usual digit form. This package provides support for spelling out numbers in Italian words, both in cardinal and in ordinal form.\n"
+"A simple package providing nuclear sub- and superscripts as commonly used in radiochemistry, radiation science, and nuclear physics and engineering applications. Isotopes which have Z with more digits than A require special spacing to appear properly; this spacing is supported in the package.\n"
"\n"
-"date: 2008-08-19 21:32:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-pst-slpe)
-msgid "Sophisticated colour gradients"
-msgstr ""
+#. summary(texlive-specs-p:texlive-nuc-doc)
+#, fuzzy
+msgid "Documentation for texlive-nuc"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-incgraph)
-msgid "Sophisticated graphics inclusion in a PDF document"
-msgstr ""
+#. description(texlive-specs-p:texlive-nuc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-nuc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-musixtex)
-msgid "Sophisticated music typesetting"
+#. summary(texlive-specs-p:texlive-numberedblock)
+msgid "Print a block of code, with unique index number"
msgstr ""
-#. summary(vim-plugins:vim-plugin-taglist)
-msgid "Source code browser with support for many languages"
+#. description(texlive-specs-p:texlive-numberedblock)
+msgid ""
+"The package has been created for the convenience of the report writer; it provides the means to number, and label, code-block snippets in your document. In this way, you can (unambiguously) refer to each snippet elsewhere in your document.\n"
+"\n"
+"date: 2014-03-06 17:55:44 +0000"
msgstr ""
-#. summary(texlive-vpe)
-msgid "Source specials for PDF output"
+#. summary(texlive-specs-p:texlive-numberedblock-doc)
+msgid "Documentation for texlive-numberedblock"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-space)
-msgid "Space stamps collection for Tux Paint"
+#. description(texlive-specs-p:texlive-numberedblock-doc)
+msgid "This package includes the documentation for texlive-numberedblock"
msgstr ""
-#. summary(texlive-zhspacing)
-msgid "Spacing for mixed CJK-English documents in XeTeX"
+#. summary(texlive-specs-p:texlive-numericplots)
+msgid "Plot numeric data (including Matlab export) using PSTricks"
msgstr ""
-#. summary(texlive-l2tabu-spanish)
-msgid "Spanish translation of \"Obsolete packages and commands\""
-msgstr ""
-
-#. description(texlive-sparklines)
+#. description(texlive-specs-p:texlive-numericplots)
msgid ""
-"Sparklines are intense, simple, wordlike graphics (so named by Edward Tufte). In lieu of a more detailed introduction, Professor Tufte's site has an early release of a chapter on sparklines. A PHP implementation may be found at SourceForge. A sparkline can be added using the sparkline environment. Also, you can add sparkling rectangles for the median and special sparkling dots in red or blue. The package requires pdflatex; sparklines cannot appear in a dvi file. The sparklines package uses pgf, and does not work with pictex.\n"
+"Plotting numeric data is a task which has often to be done for scientific papers. LaTeX itself provides no facilities for drawing more than the simplest plots from supplied data. The package will process user input, and uses PSTricks to plot the results. The package provides Matlab functions to transform Matlab results to plottable data.\n"
"\n"
-"date: 2009-11-22 09:21:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-mathspec)
-msgid "Specify arbitrary fonts for mathematics in XeTeX"
-msgstr ""
+#. summary(texlive-specs-p:texlive-numericplots-doc)
+#, fuzzy
+msgid "Documentation for texlive-numericplots"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sseq)
-msgid "Spectral sequence diagrams"
-msgstr ""
+#. description(texlive-specs-p:texlive-numericplots-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-numericplots"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(vegastrike-speech)
-msgid "Speech files for Vega Strike"
+#. summary(texlive-specs-p:texlive-numname)
+msgid "Convert a number to its English expression"
msgstr ""
-#. summary(texlive-itnumpar)
-msgid "Spell numbers in words (Italian)"
+#. description(texlive-specs-p:texlive-numname)
+msgid ""
+"The package can generate cardinal (one, two, ...) and ordinal (first, second, ...) numbers. The code derives from the memoir class, and is extracted for the convenience of non-users of that class.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-splitbib)
-msgid "Split and reorder your bibliography"
-msgstr ""
+#. summary(texlive-specs-p:texlive-numname-doc)
+#, fuzzy
+msgid "Documentation for texlive-numname"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-seqsplit)
-msgid "Split long sequences of characters in a neutral way"
+#. description(texlive-specs-p:texlive-numname-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-numname"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-numprint)
+msgid "Print numbers with separators and exponent if necessary"
msgstr ""
-#. description(texlive-splitindex)
+#. description(texlive-specs-p:texlive-numprint)
msgid ""
-"SplitIndex consists of a LaTeX package, splitidx, and a small program, splitindex. The package may be used to produce one index or several indexes. Without splitindex (for example, using the index package), the number of indexes is limited by the number of TeX's output streams. But using the program you may use even more than 16 indexes: splitidx outputs only a single file \\jobname.idx and the program splits that file into several raw index files and calls your favorite index processor for each of the files.\n"
+"The package numprint prints numbers with a separator every three digits and converts numbers given as 12345.6e789 to 12\\,345,6\\cdot 10^{789}. Numbers are printed in the current mode (text or math) in order to use the correct font. Many things, including the decimal sign, the thousand separator, as well as the product sign can be changed by the user, e.g., to reach 12,345.6\\times 10^{789}. If an optional argument is given it is printed upright as unit. Numbers can be rounded to a given number of digits. The package supports an automatic, language-dependent change of the number format. Tabular alignment using the tabular(*), array, tabularx, and longtable environments (similar to the dcolumn and rccol packages) is supported using all features of numprint. Additional text can be added before and after the formatted number.\n"
"\n"
-"date: 2013-04-09 09:35:57 +0000"
+"date: 2012-08-22 13:46:20 +0000"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-sports)
-msgid "Sports stamps collection for Tux Paint"
-msgstr ""
+#. summary(texlive-specs-p:texlive-numprint-doc)
+#, fuzzy
+msgid "Documentation for texlive-numprint"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-spotcolor)
+#. description(texlive-specs-p:texlive-numprint-doc)
#, fuzzy
-#| msgid "Fonts for HLaTeX."
-msgid "Spot colours for pdfLaTeX"
-msgstr "LaTeXová písma."
+msgid "This package includes the documentation for texlive-numprint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-spot)
-msgid "Spotlight highlighting for Beamer"
+#. summary(texlive-specs-p:texlive-oberdiek)
+msgid "A bundle of packages submitted by Heiko Oberdiek"
msgstr ""
-#. summary(texlive-spreadtab)
-msgid "Spreadsheet features for LaTeX tabular environments"
+#. description(texlive-specs-p:texlive-oberdiek)
+msgid ""
+"The bundle comprises packages to provide: accsupp: better accessibility support for PDF files; aliascnt: 'alias counters'; alphalph: multiple-alphabetic counting (a...z,aa...zz,... -- up to the full extent of a TeX counter); askinclude: replaces \\includeonly by an interactive user interface; atbegshi: a modern reimplementation of package everyshi; atenddvi: provides \\AtEndDvi command; attachfile2: attach files to PDF files; atveryend: hooks the very end of a document; auxhook: stick stuff at the start of the .aux file; bigintcalc: expandable arithmetic operations with big integers that can exceed TeX's number limits; bitset: defines and implements the data type bit set, a vector of bits; bmpsize: get bitmap size and resolution data; bookmark: alternative bookmark (outline) organization for package hyperref; catchfile: collects the contents of a file and puts it in a macro; centernot: a horizontally-centred \\not symbol; chemarr: extensible chemists' reaction arrows; classlist: re
cord information about document class(es) used; colonequals: poor man's mathematical relation symbols; dvipscol: dvips colour stack management; embedfile: embed files in PDF documents; engord: define counter-printing operations producing English ordinals; eolgrab: collect arguments delimited by end of line; epstopdf: conversion with epstopdf on the fly; etexcmds: adds a prefix to eTeX's commands, to avoid conflicts with existing macros; flags: setting and clearing flags in bit fields and converting the bit field into a decimal number; gettitlestring: clean up the string containing the title of a section, etc.; grfext: macros for adding and reordering the list of graphics file extensions recognised by the graphics package; grffile: extend file name processing in the graphics bundle; hosub: build collections of packages; holtxdoc: extra documentation macros; hologo: bookmark-enabled logos; hopatch: safely apply package patches; hycolor: implements the color option stuff that is used b
y packages hyperref and bookmark; hypbmsec: bookmarks in sectioning commands; hypcap: anjusting anchors of captions; hypdestopt: optimising hyperref's pdftex driver destinations; hypdoc: hyper-references in the LaTeX standard doc package; hypgotoe: experimental package for links to embedded files; hyphsubst: substitute hyphenation patterns; ifdraft: switch for option draft; iflang: provides expandable checks for the current language; ifluatex: looks for LuaTeX regardless of its mode and provides the switch \\ifluatex; ifpdf: provides the \\ifpdf switch; ifvtex: provides the \\ifvtex switch; infwarerr: provides a complete set of macros for informations, warnings and error messages with support for plain TeX; inputenx: enhanced handling of input encoding; intcalc: provides expandable arithmetic operations with integers; kvdefinekeys: define key-value keys in the same manner as keyval; kvoptions: use package options in key value format ; kvsetkeys: a variant of the \\setkeys command; l
etltxmacro: Let assignment for LaTeX macros; listingsutf8: (partially) extends the listings package to UTF-8 encoding; ltxcmds: exports some utility macros from the LaTeX kernel into a separate namespace and also provides them for other formats such as plain-TeX; luacolor: implements colour support based on LuaTeX's node attributes; luatex: utilises new and extended features and resources that LuaTeX provides; magicnum: allows to access magic numbers by a hierarchical name system; makerobust: make a command robust; pagegrid: prints a page grid in the background; pagesel: select pages of a document for output; pdfcolfoot: using pdftex's color stack for footnotes; pdfcol: macros for setting and maintaining new color stacks; pdfcolmk: PDFTeX COLour MarK -- fake a PDFTeX colour stack using marks (not needed for PDFTeX 1.40.0 and later); pdfcolparallel: fixes colour problems in package parallel; pdfcolparcolumns: fixes colour problems in package parcolumns; pdfcrypt: setting PDF encrypti
on; pdfescape: pdfTeX's escape features using TeX or e-TeX; pdflscape: landscape pages in PDF; pdfrender: control PDF rendering modes; pdftexcmds: provide PDFTeX primitives missing in LuaTeX; picture: dimens for picture macros; pmboxdraw: poor man's box drawing characters; protecteddef: define a command that protected against expansion; refcount: using the numeric values of references; rerunfilecheck: checksum based rerun checks on auxiliary files; resizegather: automatically resize overly large equations; rotchiffre: performs simple rotation cyphers; scrindex: redefines environment 'theindex' of package 'index', if a class from KOMA-Script is loaded; selinput: select the input encoding by specifying pairs of input characters and their glyph names; setouterhbox: set \\hbox in outer horizontal mode; settobox: getting box sizes; soulutf8: extends package soul and adds some support for UTF-8; stackrel: extensions of the \\stackrel command; stampinclude: selects the files for \\include
by inspecting the timestamp of the .aux file(s); stringenc: provides \\StringEncodingConvert for converting a string between different encodings; tabularht: tabulars with height specification; tabularkv: key value interface for tabular parameters; telprint: print German telephone numbers; thepdfnumber: canonical numbers for use in PDF files and elsewhere; transparent: using a color stack for transparency with pdftex; twoopt: commands with two optional arguments; uniquecounter: provides unlimited unique counter; zref: a proposed new reference system. Each of the packages is represented by two files, a .dtx (documented source) and a PDF file; the .ins file necessary for installation is extracted by running the .dtx file with Plain TeX.\n"
+"\n"
+"date: 2013-11-22 16:11:31 +0000"
msgstr ""
-#. summary(texlive-stmaryrd)
-msgid "St Mary Road symbols for theoretical computer science"
-msgstr ""
+#. summary(texlive-specs-p:texlive-oberdiek-doc)
+#, fuzzy
+msgid "Documentation for texlive-oberdiek"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-plstmary)
-msgid "St. Mary's Road font support for plain TeX"
+#. description(texlive-specs-p:texlive-oberdiek-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-oberdiek"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-objectz)
+msgid "Macros for typesetting Object Z"
msgstr ""
-#. description(texlive-stage)
+#. description(texlive-specs-p:texlive-objectz)
msgid ""
-"Stage.cls is a LaTeX class for creating plays of any length in a standard manuscript format for production and submission.\n"
+"The package will typeset both Z and Object-Z specifications; it develops the original zed package\n"
"\n"
-"date: 2006-11-06 11:20:58 +0000"
+"date: 2012-03-30 13:19:52 +0000"
msgstr ""
-#. summary(texlive-zxjatype)
-msgid "Standard conforming typesetting of Japanese, for XeLaTeX"
-msgstr ""
+#. summary(texlive-specs-p:texlive-objectz-doc)
+#, fuzzy
+msgid "Documentation for texlive-objectz"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-sf298)
-msgid "Standard form 298"
-msgstr ""
+#. description(texlive-specs-p:texlive-objectz-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-objectz"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-stdpage)
-msgid "Standard pages with n lines of at most m characters each"
+#. summary(texlive-specs-p:texlive-obnov)
+msgid "Obyknovennaya Novaya fonts"
msgstr ""
-#. description(texlive-pdf14)
+#. description(texlive-specs-p:texlive-obnov)
msgid ""
-"Starting with TeX Live 2010, the various formats that directly generate PDF will default to generating PDF 1.5. This is generally a good thing, but it can lead to compatibility issues with some older PDF viewers. This package changes the version of PDF generated with formats (based on pdfTeX or LuaTeX in PDF mode), back to 1.4 for documents that need to achieve maximal compatibility with old viewers.\n"
+"The Obyknovennaya Novaya (Ordinary New Face) typeface was widely used in the USSR for scientific and technical publications, as well as textbooks. The fonts are encoded to KOI8-R (which is a long-established Russian font encoding, rather than a TeX/LaTeX encoding). To use the fonts, the user needs Cyrillic font support.\n"
"\n"
-"date: 2010-03-31 10:36:09 +0000"
+"date: 2014-05-17 08:36:54 +0000"
msgstr ""
-#. summary(texlive-statex)
-msgid "Statistics style"
-msgstr ""
+#. summary(texlive-specs-p:texlive-obnov-doc)
+#, fuzzy
+msgid "Documentation for texlive-obnov"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-stellenbosch)
-msgid "Stellenbosch thesis bundle"
+#. description(texlive-specs-p:texlive-obnov-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-obnov"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-ocg-p)
+msgid "PDF OCG support in LaTeX"
msgstr ""
-#. description(texlive-versions)
+#. description(texlive-specs-p:texlive-ocg-p)
msgid ""
-"Stephan Bellantoni's version has provided preamble commands for selecting environments to be included/excluded. This package does the same, but corrects, improves, and extends it in both implementation and function.\n"
+"The package provides OCG (Optional Content Groups) support within a PDF document, replacing the ocg.sty distributed with asymptote. Nested OCGs are supported. The package may be used with PDFLatex and XeLaTeX.\n"
"\n"
-"date: 2011-04-02 17:40:46 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-statistik)
-msgid "Store statistics of a document"
+#. summary(texlive-specs-p:texlive-ocg-p-doc)
+msgid "Documentation for texlive-ocg-p"
msgstr ""
-#. summary(texlive-storecmd)
-msgid "Store the name of a defined command in a container"
+#. description(texlive-specs-p:texlive-ocg-p-doc)
+msgid "This package includes the documentation for texlive-ocg-p"
msgstr ""
-#. summary(texlive-storebox)
-msgid "Storing information for reuse"
+#. summary(texlive-specs-p:texlive-ocgx)
+msgid "Use OCGs within a PDF document without JavaScript"
msgstr ""
-#. summary(texlive-xstring)
-msgid "String manipulation for (La)TeX"
+#. description(texlive-specs-p:texlive-ocgx)
+msgid ""
+"The package extends the ocg package, which allows you to create OCGs (Optional Content Groups) in PDF documents. (The ocg package is distributed as part of Asymptote.) Every OCG includes TeX material into a layer of the PDF file. Each of these layers can be displayed or not. Links can enable or disable the display of OCGs. The ocgx package does not use Javascript embedded in the PDF document to enable (to show) or disable (to hide) OCGs.\n"
+"\n"
+"date: 2012-12-10 09:44:43 +0000"
msgstr ""
-#. summary(texlive-stringstrings)
-msgid "String manipulation for cosmetic and programming application"
+#. summary(texlive-specs-p:texlive-ocgx-doc)
+msgid "Documentation for texlive-ocgx"
msgstr ""
-#. summary(texlive-unamthesis)
-msgid "Style for Universidad Nacional Autonoma de Mexico theses"
+#. description(texlive-specs-p:texlive-ocgx-doc)
+msgid "This package includes the documentation for texlive-ocgx"
msgstr ""
-#. summary(texlive-revtex)
-msgid "Styles for various Physics Journals"
+#. summary(texlive-specs-p:texlive-ocherokee)
+msgid "LaTeX Support for the Cherokee language"
msgstr ""
-#. summary(texlive-subfloat)
-msgid "Sub-numbering for figures and tables"
+#. description(texlive-specs-p:texlive-ocherokee)
+msgid ""
+"Macros and Type 1 fonts for Typesetting the Cherokee language with the Omega version of LaTeX (known as Lambda).\n"
+"\n"
+"date: 2012-12-31 09:40:46 +0000"
msgstr ""
-#. summary(texlive-microtype)
-msgid "Subliminal refinements towards typographical perfection"
-msgstr ""
+#. summary(texlive-specs-p:texlive-ocherokee-doc)
+#, fuzzy
+msgid "Documentation for texlive-ocherokee"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-svn-multi)
-msgid "Subversion keywords in multi-file LaTeX documents"
-msgstr ""
+#. description(texlive-specs-p:texlive-ocherokee-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ocherokee"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-svn-prov)
-msgid "Subversion variants of \\Provides... macros"
+#. summary(texlive-specs-p:texlive-ocherokee-fonts)
+msgid "Severed fonts for texlive-ocherokee"
msgstr ""
-#. summary(texlive-sepfootnotes)
-msgid "Support footnotes and endnotes from separate files"
+#. description(texlive-specs-p:texlive-ocherokee-fonts)
+msgid "The separated fonts package for texlive-ocherokee"
msgstr ""
-#. summary(texlive-xecjk)
-msgid "Support for CJK documents in XeLaTeX"
-msgstr ""
+#. summary(texlive-specs-p:texlive-ocr-b)
+#, fuzzy
+#| msgid "Core Fonts for X.Org"
+msgid "Fonts for OCR-B"
+msgstr "Základní písma X.Org"
-#. summary(texlive-japanese-otf-uptex)
-msgid "Support for Japanese OTF files in upLaTeX"
-msgstr ""
-
-#. description(texlive-uhc)
+#. description(texlive-specs-p:texlive-ocr-b)
msgid ""
-"Support for Korean documents written in Korean standard KSC codes for LaTeX2e.\n"
+"Metafont source for OCR-B at several sizes.\n"
"\n"
-"date: 2007-07-29 10:13:44 +0000"
+"date: 2014-05-17 08:36:54 +0000"
msgstr ""
-#. summary(texlive-ly1)
+#. summary(texlive-specs-p:texlive-ocr-b-doc)
#, fuzzy
-msgid "Support for LY1 LaTeX encoding"
-msgstr "Podpora Unicode pro LaTeX"
+msgid "Documentation for texlive-ocr-b"
+msgstr "Dokumentace pro adaptx"
-#. summary(vim-plugins:vim-plugin-rails)
-msgid "Support for Ruby on Rails development"
-msgstr ""
-
-#. summary(texlive-vntex)
+#. description(texlive-specs-p:texlive-ocr-b-doc)
#, fuzzy
-msgid "Support for Vietnamese"
-msgstr "České překlady pro KDE"
+msgid "This package includes the documentation for texlive-ocr-b"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-logreq)
-msgid "Support for automation of the LaTeX workflow"
+#. summary(texlive-specs-p:texlive-ocr-b-outline)
+msgid "OCR-B fonts in Type 1 and OpenType"
msgstr ""
-#. summary(texlive-xecolor)
-msgid "Support for color in XeLaTeX"
+#. description(texlive-specs-p:texlive-ocr-b-outline)
+msgid ""
+"The package contains OCR-B fonts in Type1 and OpenType formats. They were generated from the Metafont sources of the OCR-B fonts. The metric files are not included here, so that original ocr-b package should also be installed.\n"
+"\n"
+"date: 2014-05-17 08:36:54 +0000"
msgstr ""
-#. summary(texlive-vhistory)
-msgid "Support for creating a change log"
+#. summary(texlive-specs-p:texlive-ocr-b-outline-doc)
+#, fuzzy
+msgid "Documentation for texlive-ocr-b-outline"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-p:texlive-ocr-b-outline-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ocr-b-outline"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-p:texlive-ocr-b-outline-fonts)
+msgid "Severed fonts for texlive-ocr-b-outline"
msgstr ""
-#. summary(texlive-pst-dbicons)
-msgid "Support for drawing ER diagrams"
+#. description(texlive-specs-p:texlive-ocr-b-outline-fonts)
+msgid "The separated fonts package for texlive-ocr-b-outline"
msgstr ""
-#. summary(texlive-niceframe)
+#. summary(texlive-specs-p:texlive-ocr-latex)
#, fuzzy
-#| msgid "XML support for castor"
-msgid "Support for fancy frames"
+msgid "LaTeX support for ocr fonts"
msgstr "XML podpora pro castor"
-#. summary(texlive-spie)
-msgid "Support for formatting SPIE Proceedings manuscripts"
+#. description(texlive-specs-p:texlive-ocr-latex)
+msgid ""
+"The package supports use of both ocr-a and ocr-b fonts in LaTeX documents.\n"
+"\n"
+"date: 2012-11-14 10:48:39 +0000"
msgstr ""
-#. summary(texlive-yfonts)
+#. summary(texlive-specs-p:texlive-ocr-latex-doc)
#, fuzzy
-msgid "Support for old German fonts"
-msgstr "XML podpora pro castor"
+msgid "Documentation for texlive-ocr-latex"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xmltex)
+#. description(texlive-specs-p:texlive-ocr-latex-doc)
#, fuzzy
-msgid "Support for parsing XML documents"
-msgstr "Rozšíření Perlu pro psaní XML dokumentů"
+msgid "This package includes the documentation for texlive-ocr-latex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-pstool)
-msgid "Support for psfrag within pdfLaTeX"
+#. summary(texlive-specs-p:texlive-octavo)
+msgid "Typeset books following classical design and layout"
msgstr ""
-#. summary(texlive-pdftricks)
-msgid "Support for pstricks in pdfTeX"
+#. description(texlive-specs-p:texlive-octavo)
+msgid ""
+"The octavo class is a modification of the standard LaTeX book class. Its purpose is to typeset books following classical design and layout principles, with the express intention of encouraging the making of beautiful books by anyone with access to a good printer and with an inclination towards venerable crafts, e.g., bookbinding. The octavo class differs from the book class by implementing many of the proposals and insights of respected experts, especially Jan Tschichold and Hugh Williamson. The documentation discusses methods to organise and print out any text into signatures, which can then be gathered, folded and sewn into a book.\n"
+"\n"
+"date: 2013-10-30 12:49:16 +0000"
msgstr ""
-#. summary(texlive-spelling)
-msgid "Support for spell-checking of LuaTeX documents"
-msgstr ""
+#. summary(texlive-specs-p:texlive-octavo-doc)
+#, fuzzy
+msgid "Documentation for texlive-octavo"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-permute)
-msgid "Support for symmetric groups"
-msgstr ""
+#. description(texlive-specs-p:texlive-octavo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-octavo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-tsemlines)
-msgid "Support for the ancient \\emline macro"
+#. summary(texlive-specs-p:texlive-odsfile)
+msgid "Read OpenDocument Spreadsheet documents as LaTeX tables"
msgstr ""
-#. description(texlive-pawpict)
+#. description(texlive-specs-p:texlive-odsfile)
msgid ""
-"Support for the easy inclusion of graphics made by PAW (Physics Analysis Workstation). You need to have PAW installed on your system to benefit from this package.\n"
+"The distribution includes a package and a lua library that can together read OpenDocument spreadsheet documents as LaTeX tables. Cells in the tables may be processed by LaTeX macros, so that (for example) the package may be used for drawing some plots. The package uses lua's zip library.\n"
"\n"
-"date: 2007-01-12 19:52:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-rcsinfo)
-msgid "Support for the revision control system"
+#. summary(texlive-specs-p:texlive-odsfile-doc)
+msgid "Documentation for texlive-odsfile"
msgstr ""
-#. summary(texlive-metre)
-msgid "Support for the work of classicists"
+#. description(texlive-specs-p:texlive-odsfile-doc)
+msgid "This package includes the documentation for texlive-odsfile"
msgstr ""
-#. summary(texlive-liturg)
-msgid "Support for typesetting Catholic liturgical texts"
+#. summary(texlive-specs-p:texlive-ofs)
+msgid "Macros for managing large font collections"
msgstr ""
-#. summary(texlive-tucv)
-msgid "Support for typesetting a CV or resumee"
+#. description(texlive-specs-p:texlive-ofs)
+msgid ""
+"OFS (Olsak's Font System) is a set of Plain TeX and LaTeX macros for managing large font collections; it has been used by Czech/Slovak users for many years. Main features include: Mapping from long names of fonts to the metric file name. The user can specify only exact long names in documents. Support for many font encodings. Printing of catalogues of fonts and test samples of font families; the interactive macro \\showfonts shows all font families you have installed via OFS. The user interface is the same for Plain TeX and for LaTeX, but the implementation differs: the LaTeX variant of OFS uses NFSS, but the Plain variant implements its own font management (which may even be better than NFSS) Support for math fonts including TX fonts.\n"
+"\n"
+"date: 2014-05-23 13:55:46 +0000"
msgstr ""
-#. summary(texlive-t2)
-msgid "Support for using T2 encoding"
-msgstr ""
+#. summary(texlive-specs-p:texlive-ofs-doc)
+#, fuzzy
+msgid "Documentation for texlive-ofs"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-xq)
-msgid "Support for writing about xiangqi"
-msgstr ""
+#. description(texlive-specs-p:texlive-ofs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ofs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-ulqda)
-msgid "Support of Qualitative Data Analysis"
+#. summary(texlive-specs-q:texlive-ogham)
+msgid "Fonts for typesetting Ogham script"
msgstr ""
-#. summary(texlive-pst-sigsys)
-msgid "Support of signal processing-related disciplines"
+#. description(texlive-specs-q:texlive-ogham)
+msgid ""
+"The font provides the Ogham alphabet, which is found on a number of Irish and Pictish carvings dating from the 4th century AD. The font is distributed as Metafont source, which has been patched (with the author's permission) for stability at different output device resolutions. (Thanks are due to Peter Flynn and Dan Luecking.)\n"
+"\n"
+"date: 2014-05-17 08:36:54 +0000"
msgstr ""
-#. summary(texlive-passivetex)
-msgid "Support package for XML/SGML typesetting"
+#. summary(texlive-specs-q:texlive-ogham-doc)
+#, fuzzy
+msgid "Documentation for texlive-ogham"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-ogham-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ogham"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-oinuit)
+msgid "LaTeX Support for the Inuktitut Language"
msgstr ""
-#. summary(texlive-pdfscreen)
-msgid "Support screen-based document design"
+#. description(texlive-specs-q:texlive-oinuit)
+msgid ""
+"The package provides a set of Lambda (Omega LaTeX) typesetting tools for the Inuktitut language. Five different input methods are supported and with the necessary fonts are also provided.\n"
+"\n"
+"date: 2012-12-31 09:40:46 +0000"
msgstr ""
-#. summary(texlive-impnattypo)
-msgid "Support typography of l'Imprimerie Nationale FranASSaise"
+#. summary(texlive-specs-q:texlive-oinuit-doc)
+#, fuzzy
+msgid "Documentation for texlive-oinuit"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-oinuit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-oinuit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-oinuit-fonts)
+msgid "Severed fonts for texlive-oinuit"
msgstr ""
-#. summary(texlive-mfware)
-msgid "Supporting tools for use with Metafont"
+#. description(texlive-specs-q:texlive-oinuit-fonts)
+msgid "The separated fonts package for texlive-oinuit"
msgstr ""
-#. description(texlive-urlbst)
+#. summary(texlive-specs-q:texlive-oldlatin)
+#, fuzzy
+#| msgid "Unicode Version of the Computer Modern Fonts"
+msgid "Compute Modern-like font with long s"
+msgstr "Unicode verze písem Computer Modern"
+
+#. description(texlive-specs-q:texlive-oldlatin)
msgid ""
-"Supports a new BibTeX 'webpage' entry type and 'url', 'lastchecked', and 'eprint' and 'DOI' fields. The Perl script urlbst can be used to add this support to an arbitrary .bst file which has a reasonably conventional structure. The result is meant to be robust rather than pretty.\n"
+"Metafont sources modified from Computer Modern in order to generate \"long s\" which was used in old text.\n"
"\n"
-"date: 2011-11-15 10:50:22 +0000"
+"date: 2014-05-17 13:44:21 +0000"
msgstr ""
-#. description(texlive-minutes)
-msgid ""
-"Supports the creation of a collection of minutes. Features include: - Support of tasks (who, schedule, what, time of finishing; - possibility of creating a list of open tasks; - inclusion of open tasks from other minutes; - Support for attachments; - Support of schedule dates (in planning: support for the calendar package); - Different versions ('secret parts'); and - Macros for votes and decisions (list of decisions). Support for minutes in a variety of languages is available.\n"
-"\n"
-"date: 2009-12-05 11:31:44 +0000"
+#. summary(texlive-specs-q:texlive-oldlatin-doc)
+#, fuzzy
+msgid "Documentation for texlive-oldlatin"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-oldlatin-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-oldlatin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-oldstandard)
+msgid "Old Standard: A Unicode Font for Classical and Medieval Studies"
msgstr ""
-#. description(texlive-ieeepes)
+#. description(texlive-specs-q:texlive-oldstandard)
msgid ""
-"Supports typesetting of transactions, as well as discussions and closures, for the IEEE Power Engineering Society Transactions journals.\n"
+"Old Standard is designed to reproduce the actual printing style of the early 20th century, reviving a specific type of Modern (classicist) style of serif typefaces, very commonly used in various editions of the late 19th and early 20th century, but almost completely abandoned later. The font supports typesetting of Old and Middle English, Old Icelandic, Cyrillic (with historical characters, extensions for Old Slavonic and localised forms), Gothic transliterations, critical editions of Classical Greek and Latin, and many more. Old Standard works with TeX engines that directly support OpenType features, such as XeTeX and LuaTeX.\n"
"\n"
-"date: 2010-03-06 16:23:09 +0000"
+"date: 2014-05-17 13:44:21 +0000"
msgstr ""
-#. summary(texlive-swebib)
-msgid "Swedish bibliography styles"
+#. summary(texlive-specs-q:texlive-oldstandard-doc)
+#, fuzzy
+msgid "Documentation for texlive-oldstandard"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-oldstandard-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-oldstandard"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-oldstandard-fonts)
+msgid "Severed fonts for texlive-oldstandard"
msgstr ""
-#. summary(texlive-ucharclasses)
-msgid "Switch fonts in XeTeX according to what is being processed"
+#. description(texlive-specs-q:texlive-oldstandard-fonts)
+msgid "The separated fonts package for texlive-oldstandard"
msgstr ""
-#. summary(texlive-mdsymbol)
-msgid "Symbol fonts to match Adobe Myriad Pro"
+#. summary(texlive-specs-q:texlive-oldstyle)
+msgid "Old style numbers in OT1 encoding"
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-symbols)
-msgid "Symbol stamps collection for Tux Paint"
+#. description(texlive-specs-q:texlive-oldstyle)
+msgid ""
+"Font information needed to load the cmmi and cmmib fonts for use to produce oldstyle numbers.\n"
+"\n"
+"date: 2012-06-16 08:52:26 +0000"
msgstr ""
-#. summary(texlive-multiobjective)
-msgid "Symbols for multibojective optimisation etcetera"
+#. summary(texlive-specs-q:texlive-oldstyle-doc)
+#, fuzzy
+msgid "Documentation for texlive-oldstyle"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-oldstyle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-oldstyle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-omega)
+msgid "A wide-character-set extension of TeX"
msgstr ""
-#. summary(texlive-trsym)
-msgid "Symbols for transformations"
+#. description(texlive-specs-q:texlive-omega)
+msgid ""
+"A development of TeX, which deals in multi-octet Unicode characters, to enable native treatment of a wide range of languages without changing character-set. Work on Omega seems, more or less, to have ceased: its immediate successor was to be the aleph project (though that too has stalled). Projects developing Omega (and Aleph) ideas include Omega-2 and LuaTeX.\n"
+"\n"
+"date: 2012-12-31 09:37:50 +0000"
msgstr ""
-#. summary(texlive-verbments)
+#. summary(texlive-specs-q:texlive-omega-doc)
#, fuzzy
-#| msgid "Syntax Checker for LaTeX Documents"
-msgid "Syntax highlighting of source code in LaTeX documents"
-msgstr "Program pro kontrolu syntaxe pro LaTeX"
+msgid "Documentation for texlive-omega"
+msgstr "Dokumentace pro adaptx"
-#. description(tomcat:tomcat-jsvc)
-msgid "Systemd service and wrapper scripts to start tomcat with jsvc, which allows tomcat to perform some privileged operations (e.g. bind to a port < 1024) and then switch identity to a non-privileged user."
+#. description(texlive-specs-q:texlive-omega-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-omega"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-omega-fonts)
+msgid "Severed fonts for texlive-omega"
msgstr ""
-#. summary(texlive-zhmetrics)
-msgid "TFM subfont files for using Chinese fonts in 8-bit TeX"
+#. description(texlive-specs-q:texlive-omega-fonts)
+msgid "The separated fonts package for texlive-omega"
msgstr ""
-#. summary(vcron)
-msgid "TK-Interface for cron and at"
-msgstr "Tk rozhraní pro programy cron a at"
+#. summary(texlive-specs-q:texlive-omegaware)
+msgid "Package omegaware"
+msgstr "Balíček omegaware"
-#. description(vcron)
-msgid "TK-Interface for cron and at."
-msgstr "Tk rozhraní pro programy cron a at."
+#. description(texlive-specs-q:texlive-omegaware)
+msgid "The omegaware package"
+msgstr ""
-#. description(tvbrowser)
-msgid "TV-Browser is Plugin based digital TV guide. Plugins can be installed with the download function of TV-Browser."
+#. summary(texlive-specs-q:texlive-onlyamsmath)
+msgid "Inhibit use of non-amsmath mathematics markup when using amsmath"
msgstr ""
-#. summary(vim-plugins:vim-plugin-searchcomplete)
-msgid "Tab completion of words inside of a search"
+#. description(texlive-specs-q:texlive-onlyamsmath)
+msgid ""
+"This package inhibits the usage of plain TeX and (on demand) of standard LaTeX mathematics environments. This is useful for class writers who want to encourage their users to use the environments provided by the amsmath package.\n"
+"\n"
+"date: 2012-06-16 12:32:26 +0000"
msgstr ""
-#. summary(texlive-Tabbing)
-msgid "Tabbing with accented letters"
+#. summary(texlive-specs-q:texlive-onlyamsmath-doc)
+#, fuzzy
+msgid "Documentation for texlive-onlyamsmath"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-onlyamsmath-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-onlyamsmath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-onrannual)
+msgid "Class for Office of Naval Research Ocean Battlespace Sensing annual report"
msgstr ""
-#. summary(texlive-shorttoc)
-msgid "Table of contents with different depths"
+#. description(texlive-specs-q:texlive-onrannual)
+msgid ""
+"This is an unofficial document class for writing ONR annual reports using LaTeX; as ONR has had numerous problems with LaTeX-generated PDF submissions in the past. A skeleton document (and its PDF output) are included.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-ltablex)
+#. summary(texlive-specs-q:texlive-onrannual-doc)
#, fuzzy
-#| msgid "Languages for package epiphany-extensions"
-msgid "Table package extensions"
-msgstr "Jazykový balíček pro epiphany-extensions"
+msgid "Documentation for texlive-onrannual"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-tkz-tab)
-msgid "Tables of signs and variations using PGF/TikZ"
+#. description(texlive-specs-q:texlive-onrannual-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-onrannual"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-opcit)
+msgid "Footnote-style bibliographical references"
msgstr ""
-#. summary(texlive-threeparttable)
-msgid "Tables with captions and notes all the same width"
+#. description(texlive-specs-q:texlive-opcit)
+msgid ""
+"This package addresses the problem of expressing citations in a style that is natural for humanities studies, yet does not interfere with the flow of text (as author-year styles do). The package differs from footbib in that it uses real footnotes, potentially in the same series as any of the document's other footnotes. Opcit also, as its name implies, avoids repetition of full citations, achieving this, to a large extent, automatically.\n"
+"\n"
+"date: 2012-06-16 12:32:26 +0000"
msgstr ""
-#. summary(texlive-makecell)
-msgid "Tabular column heads and multilined cells"
+#. summary(texlive-specs-q:texlive-opcit-doc)
+#, fuzzy
+msgid "Documentation for texlive-opcit"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-opcit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-opcit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-opensans)
+msgid "The Open Sans font family, and LaTeX support"
msgstr ""
-#. summary(texlive-tabulary)
-msgid "Tabular with variable width columns balanced"
+#. description(texlive-specs-q:texlive-opensans)
+msgid ""
+"Open Sans is a humanist sans serif typeface designed by Steve Matteson; the font is available from the Google Font Directory as TrueType files licensed under the Apache License version 2.0. The package provides support for this font family in LaTeX. It includes the original TrueType fonts, as well as Type 1 versions, converted for this package using FontForge for full support with dvips\n"
+"\n"
+"date: 2014-05-17 13:44:21 +0000"
msgstr ""
-#. summary(texlive-polytable)
-msgid "Tabular-like environments with named columns"
+#. summary(texlive-specs-q:texlive-opensans-doc)
+#, fuzzy
+msgid "Documentation for texlive-opensans"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-opensans-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-opensans"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-opensans-fonts)
+msgid "Severed fonts for texlive-opensans"
msgstr ""
-#. summary(texlive-tablists)
-msgid "Tabulated lists of short items"
+#. description(texlive-specs-q:texlive-opensans-fonts)
+msgid "The separated fonts package for texlive-opensans"
msgstr ""
-#. summary(texlive-tableof)
-msgid "Tagging tables of contents"
+#. summary(texlive-specs-q:texlive-opteng)
+msgid "SPIE Optical Engineering and OE Letters manuscript template"
msgstr ""
-#. description(texlive-tapir)
+#. description(texlive-specs-q:texlive-opteng)
msgid ""
-"Tapir is a simple geometrical font mostly created of line and circular segments with constant thickness. The font is available as MetaFont source and in Adobe Type 1 format. The character set contains all characters in the range 0-127 (as in cmr10), accented characters used in the Czech, Slovak and Polish languages.\n"
+"With this template, and associated style and LaTeX packages, it is possible to estimate the page length of manuscripts for submission to the SPIE journals 'Optical Engineering' and 'Optical Engineering Letters'. With a strict three-page limit, this is particularly important for the latter. The template gives simple instructions on how to prepare the manuscript.\n"
"\n"
-"date: 2007-03-12 13:32:12 +0000"
+"date: 2012-08-13 10:34:19 +0000"
msgstr ""
-#. summary(texlive-filesystem:texlive-scheme-tetex)
-msgid "TeTeX scheme (more than medium, but nowhere near full)"
+#. summary(texlive-specs-q:texlive-opteng-doc)
+msgid "Documentation for texlive-opteng"
msgstr ""
-#. summary(texlive-tex-gyre)
-msgid "TeX Fonts extending freely available URW fonts"
+#. description(texlive-specs-q:texlive-opteng-doc)
+msgid "This package includes the documentation for texlive-opteng"
msgstr ""
-#. summary(texlive-texlive-common)
-msgid "TeX Live documentation (common elements)"
+#. summary(texlive-specs-q:texlive-optional)
+msgid "Facilitate optional printing of parts of a document"
msgstr ""
-#. summary(texlive-texlive-zh-cn)
-msgid "TeX Live manual (Chinese)"
+#. description(texlive-specs-q:texlive-optional)
+msgid ""
+"Optional provides simple, flexible, optional compilation of LaTeX documents. Option switches may be given via package options, by the \\UseOption command, or interactively via the \\AskOption command (help text may be provided, by defining the \\ExplainOptions command). The package is not robust, in the way that comment package is, against ill-behaved text. In particular, verbatim text may not be directly included in optional sections (whether they're included or not).\n"
+"\n"
+"date: 2011-09-30 20:42:57 +0000"
msgstr ""
-#. summary(texlive-texlive-cz)
+#. summary(texlive-specs-q:texlive-optional-doc)
#, fuzzy
-#| msgid "SUSE Linux Manual (Czech)"
-msgid "TeX Live manual (Czech/Slovak)"
-msgstr "Manuál SUSE Linuxu (anglicky)"
+msgid "Documentation for texlive-optional"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texlive-en)
+#. description(texlive-specs-q:texlive-optional-doc)
#, fuzzy
-msgid "TeX Live manual (English)"
-msgstr "SUSE Linux manuál (anglicky)."
+msgid "This package includes the documentation for texlive-optional"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texlive-fr)
+#. summary(texlive-specs-q:texlive-ordinalpt)
+msgid "Counters as ordinal numbers in Portuguese"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-ordinalpt)
+msgid ""
+"The package provides a counter style (like \\arabic, \\alph and others) which produces as output strings like \"primeiro\" (\"first\" in Portuguese), \"segundo\" (second), and so on up to 1999th. Separate counter commands are provided for different letter case variants, and for masculine and feminine gender inflections.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-q:texlive-ordinalpt-doc)
#, fuzzy
-msgid "TeX Live manual (French)"
-msgstr "Manuálové stránky z projektu LDP ve francouzštině"
+msgid "Documentation for texlive-ordinalpt"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texlive-de)
+#. description(texlive-specs-q:texlive-ordinalpt-doc)
#, fuzzy
-msgid "TeX Live manual (German)"
-msgstr "SUSE Linux manuál (německy)."
+msgid "This package includes the documentation for texlive-ordinalpt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texlive-it)
+#. summary(texlive-specs-q:texlive-orkhun)
#, fuzzy
-msgid "TeX Live manual (Italian)"
-msgstr "SUSE Linux manuál (italsky)."
+#| msgid "Optional fonts for Ghostscript"
+msgid "A font for orkhun script"
+msgstr "Volitelné fonty pro Ghostscript"
-#. summary(texlive-texlive-pl)
+#. description(texlive-specs-q:texlive-orkhun)
+msgid ""
+"The font covers an old Turkic script. It is provided as Metafont source.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-q:texlive-orkhun-doc)
#, fuzzy
-msgid "TeX Live manual (Polish)"
-msgstr "Manuálové stránky z projektu LDP v italštině"
+msgid "Documentation for texlive-orkhun"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-texlive-ru)
+#. description(texlive-specs-q:texlive-orkhun-doc)
#, fuzzy
-msgid "TeX Live manual (Russian)"
-msgstr "SUSE Linux manuál (německy)."
+msgid "This package includes the documentation for texlive-orkhun"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-texlive-sr)
-msgid "TeX Live manual (Serbian)"
+#. summary(texlive-specs-q:texlive-oscola)
+msgid "BibLaTeX style for the Oxford Standard for the Citation of Legal Authorities"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-tetex)
-msgid "TeX Live scheme nearly equivalent to the teTeX distribution that was maintained by Thomas Esser."
-msgstr ""
-
-#. description(texlive-tex)
+#. description(texlive-specs-q:texlive-oscola)
msgid ""
-"TeX is a typesetting system that incorporates a macro processor. A TeX source document specifies or incorporates a number of macro definitions that instruct the TeX engine how to typeset the document. The TeX engine also uses font metrics generated by Metafont, or by any of several other mechanisms that incorporate fonts from other sources into an environment suitable for TeX. TeX has been, and continues, a basis and an inspiration for several other programs, including e-TeX and PDFTeX. The distribution includes the source of Knuth's TeX book; this source is there to read, as an example of writing TeX -- it should not be processed without Knuth's direct permission.\n"
+"The package provides a set of style files for use with Biblatex (v 2+) and Biber (v 1+) to produce citations and bibliographies in accordance with the widely-used Oxford Standard for the Citation of Legal Authorities. It also includes facilities for constructing tables of cases and legislation from citations (in conjunction with appropriate indexing packages).\n"
"\n"
-"date: 2011-11-09 14:33:34 +0000"
+"date: 2014-05-22 15:35:02 +0000"
msgstr ""
-#. summary(texlive-tap)
-msgid "TeX macros for typesetting complex tables"
+#. summary(texlive-specs-q:texlive-oscola-doc)
+msgid "Documentation for texlive-oscola"
msgstr ""
-#. summary(texlive-norasi-c90)
-msgid "TeX support (from CJK) for the norasi font"
+#. description(texlive-specs-q:texlive-oscola-doc)
+msgid "This package includes the documentation for texlive-oscola"
msgstr ""
-#. summary(texlive-tex-ps)
-msgid "TeX to PostScript generic macros and add-ons"
+#. summary(texlive-specs-q:texlive-ot-tableau)
+msgid "Optimality Theory tableaux in LaTeX"
msgstr ""
-#. description(texlive-tex-ps)
+#. description(texlive-specs-q:texlive-ot-tableau)
msgid ""
-"TeX to PostScript generic macros and add-ons: transformations of EPS files, prepress preparation, color separation, mirror, etc.\n"
+"The package makes it easy to create beautiful optimality- theoretic tableaux. The LaTeX source is visually very similar to a formatted tableau, which makes working with the source code painless (well, less painful). A variety of stylistic variants are available to suit personal taste.\n"
"\n"
-"date: 2009-10-09 22:51:28 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex-gyre-math)
-msgid ""
-"TeX-Gyre-Math is to be a collection of maths fonts to match the text fonts of the TeX-Gyre collection. The collection will be made available in OpenType format, only; fonts will conform to the developing standards for OpenType maths fonts. TeX-Gyre- Math-Pagella (to match Tex-Gyre-Pagella) and TeX-Gyre-Math- Termes (to match Tex-Gyre-Termes) fonts are provided.\n"
-"\n"
-"date: 2013-02-06 10:14:35 +0000"
+#. summary(texlive-specs-q:texlive-ot-tableau-doc)
+#, fuzzy
+msgid "Documentation for texlive-ot-tableau"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-ot-tableau-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ot-tableau"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-othello)
+msgid "Modification of a Go package to create othello boards"
msgstr ""
-#. description(texlive-texpower)
+#. description(texlive-specs-q:texlive-othello)
msgid ""
-"TeXPower is a bundle of packages intended to provide an all- inclusive environment for designing pdf screen presentations to be viewed in full-screen mode, especially for projecting `online' with a video beamer. For some of its core functions, it uses code derived from ppower4 packages. It is, however, not a complete environment in itself: it relies on an existing class for preparing slides (such as foiltex or seminar) or another package such as pdfslide.\n"
+"A package (based on Kolodziejska's go), and fonts (as Metafont source) are provided.\n"
"\n"
-"date: 2012-02-24 10:11:42 +0000"
+"date: 2014-05-21 23:06:35 +0000"
msgstr ""
-#. description(texlive-texcount)
-msgid ""
-"TeXcount is a Perl script that counts words in the text of LaTeX files. It has rules for handling most of the common macros, and can provide colour-coded output showing which parts of the text have been counted. The package script is available as a Web service via its home page.\n"
-"\n"
-"date: 2011-07-29 14:36:04 +0000"
+#. summary(texlive-specs-q:texlive-othello-doc)
+#, fuzzy
+msgid "Documentation for texlive-othello"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-othello-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-othello"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-othelloboard)
+msgid "Typeset Othello (Reversi) diagrams of any size, with annotations"
msgstr ""
-#. description(texlive-texdoc)
+#. description(texlive-specs-q:texlive-othelloboard)
msgid ""
-"TeXdoc is an application for easy access to the package documentation of a TeX distributions (i.e., .dvi, .pdf or .ps files on the $TEXDOCS tree). It is distributed with TeX-Live and a derivative is distributed with miktex.\n"
+"The package enables the user to generate high-quality Othello (also known as Reversi) board diagrams of any size. The diagrams support annotations, including full game transcripts. Automated board or transcript creation, from plain text formats standard to WZebra (and other programs) is also supported.\n"
"\n"
-"date: 2012-06-27 20:19:02 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-texdraw)
-msgid ""
-"TeXdraw is a set of macro definitions for TeX, which allow the user to produce PostScript drawings from within TeX and LaTeX. TeXdraw has been designed to be extensible. Drawing 'segments' are relocatable, self-contained units. Using a combination of the TeX's grouping mechanism and the gsave/grestore mechanism in PostScript, drawing segments allow for local changes to the scaling and line parameters. Using TeX's macro definition capability, new drawing commands can be constructed from drawing segments.\n"
-"\n"
-"date: 2012-06-05 19:37:17 +0000"
+#. summary(texlive-specs-q:texlive-othelloboard-doc)
+#, fuzzy
+msgid "Documentation for texlive-othelloboard"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-othelloboard-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-othelloboard"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-otibet)
+msgid "Package otibet"
+msgstr "Balíček otibet"
+
+#. description(texlive-specs-q:texlive-otibet)
+msgid "The otibet package"
msgstr ""
-#. description(texlive-texlogos)
-msgid ""
-"TeXlogos defines an assortment of frequently used logos not contained in base LaTeX itself. The MetaFont, MetaPost, AMS, BibTeX and SliTeX logos are defined, as long as you have the appropriate CM/Logo/AMS fonts. Currency symbols Euro, Cent, Yen, Won and Naira are defined so as not to need TS1-encoded fonts. Also defined are the C++ logo, with the '+' signs properly positioned, and the logo of the Vienna University Business Administration Center (BWZ).\n"
-"\n"
-"date: 2007-01-16 08:34:54 +0000"
+#. summary(texlive-specs-q:texlive-otibet-doc)
+#, fuzzy
+msgid "Documentation for texlive-otibet"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-otibet-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-otibet"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-oubraces)
+msgid "Braces over and under a formula"
msgstr ""
-#. description(texlive-texmate)
+#. description(texlive-specs-q:texlive-oubraces)
msgid ""
-"TeXmate formats chess games from very simple ascii input. The clean \"1. e4 e5; 2. Nf3 Nc6; 3. Bb5 a6\" will produce the same results as the sloppier \"1 e4 e5; Nf3 Nc6 3.. Bb5 a6\". The resulting format is fully customizable. There are 4 levels of commentary: 1 is the main game, 2-3 are commentaries. Each has its fonts, punctuation marks, etc., and these are also customizable. The package includes a tool for the creation of diagrams. The package works in conjunction with skak to produce diagrams of the current position automatically. For chess fonts, the package uses the chessfss system.\n"
+"Provides a means to interleave \\overbrace and \\underbrace in the same formula.\n"
"\n"
-"date: 2006-09-21 19:05:13 +0000"
+"date: 2012-06-12 20:20:47 +0000"
msgstr ""
-#. description(texlive-texshade)
+#. summary(texlive-specs-q:texlive-oubraces-doc)
+#, fuzzy
+msgid "Documentation for texlive-oubraces"
+msgstr "HTML dokumentace pro GNU C Library"
+
+#. description(texlive-specs-q:texlive-oubraces-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-oubraces"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-outline)
+#, fuzzy
+#| msgid "Chroot environment for BIND named and lwresd"
+msgid "List environment for making outlines"
+msgstr "Prostředí chroot pro BIND named a lwresd"
+
+#. description(texlive-specs-q:texlive-outline)
msgid ""
-"TeXshade is alignment shading software completely written in TeX/LaTeX; it can process multiple sequence alignments in the .MSF and the .ALN file formats. In addition to common shading algorithms, it provides special shading modes showing functional aspects, e.g. charge or hydropathy, and a wide range of commands for handling shading colours, text styles, labels, legends; it even allows the user to define completely new shading modes. TeXshade combines highest flexibility with TeX output quality -- all in a bundle that does not demand excessive development time of the user.\n"
+"The package defines an outline environment, which provides facilities similar to enumerate, but up to 6 levels deep.\n"
"\n"
-"date: 2011-12-01 12:24:33 +0000"
+"date: 2012-01-23 14:07:56 +0000"
msgstr ""
-#. description(texlive-texsis)
+#. summary(texlive-specs-q:texlive-outline-doc)
+#, fuzzy
+msgid "Documentation for texlive-outline"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-outline-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-outline"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-outliner)
+msgid "Change section levels easily"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-outliner)
msgid ""
-"TeXsis is a TeX macro package which provides useful features for typesetting research papers and related documents. For example, it includes support specifically for: Automatic numbering of equations, figures, tables and references; Simplified control of type sizes, line spacing, footnotes, running headlines and footlines, and tables of contents, figures and tables; Specialized document formats for research papers, preprints and ``e-prints,'' conference proceedings, theses, books, referee reports, letters, and memoranda; Simplified means of constructing an index for a book or thesis; Easy to use double column formatting; Specialized environments for lists, theorems and proofs, centered or non-justified text, and listing computer code; Specialized macros for easily constructing ruled tables. TeXsis was originally developed for physicists, but others may also find it useful. It is completely compatible with Plain TeX.\n"
+"Allows you to write \"\\Level 2 {Some heading}\" instead of the usual \\section stuff; the definitions of the levels can then easily be changed. There is a mechanism for shifting all levels. This makes it easy to bundle existing articles into a compilation.\n"
"\n"
-"date: 2006-12-10 23:37:24 +0000"
+"date: 2012-06-09 16:05:07 +0000"
msgstr ""
-#. summary(yum-utils:yum-refresh-updatesd)
-msgid "Tell yum-updatesd to check for updates when yum exits"
-msgstr ""
+#. summary(texlive-specs-q:texlive-outliner-doc)
+#, fuzzy
+msgid "Documentation for texlive-outliner"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-templates-fenn)
-msgid "Templates for TeX usage"
-msgstr ""
+#. description(texlive-specs-q:texlive-outliner-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-outliner"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-otf-fonts)
-msgid "Tempora LGC Unicode Fonts (OpenType Format)"
+#. summary(texlive-specs-q:texlive-outlines)
+msgid "Produce \"outline\" lists"
msgstr ""
-#. summary(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-ttf-fonts)
-msgid "Tempora LGC Unicode Fonts (TrueType Format)"
-msgstr ""
-
-#. description(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-otf-fonts)
+#. description(texlive-specs-q:texlive-outlines)
msgid ""
-"Tempora LGC Unicode is a font family, designed to provide a free typeface suitable for word processing in languages which use 3 European alphabets: Latin, Greek and Cyrillic. It may be especially useful for philologists (mainly slavists and classicists), since it supports historical Cyrillic letters available in the Unicode standard (including letters used in Russian pre-1918 orthography) as well as all accented combinations and additional characters needed for fully accented Greek (both classical and modern). Tempora LGC Unicode is a \"smart\" font, intended to demonstrate nicities of the OpenType technologie, applicable to European scripts.\n"
+"Defines an outline environment, which allows outline-style indented lists with freely mixed levels up to four levels deep. It replaces the nested begin/end pairs by different item tags \\1 to \\4 for each nesting level. This is very convenient in cases where nested lists are used a lot, such as for to-do lists or presentation slides.\n"
"\n"
-"This package contains fonts in OpenType format."
+"date: 2012-01-25 22:35:10 +0000"
msgstr ""
-#. description(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-ttf-fonts)
-msgid ""
-"Tempora LGC Unicode is a font family, designed to provide a free typeface suitable for word processing in languages which use 3 European alphabets: Latin, Greek and Cyrillic. It may be especially useful for philologists (mainly slavists and classicists), since it supports historical Cyrillic letters available in the Unicode standard (including letters used in Russian pre-1918 orthography) as well as all accented combinations and additional characters needed for fully accented Greek (both classical and modern). Tempora LGC Unicode is a \"smart\" font, intended to demonstrate nicities of the OpenType technologie, applicable to European scripts.\n"
-"\n"
-"This package contains fonts in TrueType format."
+#. summary(texlive-specs-q:texlive-outlines-doc)
+#, fuzzy
+msgid "Documentation for texlive-outlines"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-outlines-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-outlines"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-overpic)
+msgid "Combine LaTeX commands over included graphics"
msgstr ""
-#. description(texlive-texapi)
+#. description(texlive-specs-q:texlive-overpic)
msgid ""
-"Texapi provides utility macros to write format-independent (and\n"
-"-aware) packages. It is similar in spirit to the etoolbox, except that it isn't tied to LaTeX. Tools include: engine and format detection, expansion control, command definition and manipulation, various testing macros, string operations, and highly customizable while and for loops. The package requires e-TeX (and, should you want to compile its documentation, the pitex package is also needed).\n"
+"The overpic environment is a cross between the LaTeX picture environment and the \\includegraphics command of graphicx. The resulting picture environment has the same dimensions as the included graphic. LaTeX commands can be placed on the graphic at defined positions; a grid for orientation is available.\n"
"\n"
-"date: 2011-10-03 06:52:14 +0000"
+"date: 2012-06-08 13:42:15 +0000"
msgstr ""
-#. summary(texlive-texinfo)
+#. summary(texlive-specs-q:texlive-overpic-doc)
#, fuzzy
-msgid "Texinfo documentation system"
+msgid "Documentation for texlive-overpic"
msgstr "Dokumentace pro adaptx"
-#. summary(texlive-pst-text)
-msgid "Text and character manipulation in PSTricks"
-msgstr ""
+#. description(texlive-specs-q:texlive-overpic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-overpic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mathcomp)
-msgid "Text symbols in maths mode"
+#. summary(texlive-specs-q:texlive-pacioli)
+msgid "Fonts designed by Fra Luca de Pacioli in 1497"
msgstr ""
-#. description(texlive-resphilosophica)
+#. description(texlive-specs-q:texlive-pacioli)
msgid ""
-"Th bundle provides a class for typesetting articles for the journal Res Philosophica. Development was commissioned by Saint Louis University.\n"
+"Pacioli was a c.15 mathematician, and his font was designed according to 'the divine proportion'. The font is uppercase letters together with punctuation and some analphabetics; no lowercase or digits. The Metafont source is distributed in a .dtx file, together with LaTeX support.\n"
"\n"
-"date: 2013-01-10 18:11:35 +0000"
+"date: 2014-05-21 23:06:35 +0000"
msgstr ""
-#. description(zziplib:zziplib-devel-32bit)
-msgid "That are the header files needed for developing applications using ZZipLib."
-msgstr "Toto jsou hlavičkové soubory pro vývoj aplikací pomocí ZZipLib."
+#. summary(texlive-specs-q:texlive-pacioli-doc)
+#, fuzzy
+msgid "Documentation for texlive-pacioli"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ibygrk:texlive-ibygrk-fonts)
-msgid "The separated fonts package for texlive-ibygrk"
-msgstr ""
+#. description(texlive-specs-q:texlive-pacioli-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pacioli"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-inconsolata:texlive-inconsolata-fonts)
-msgid "The separated fonts package for texlive-inconsolata"
+#. summary(texlive-specs-q:texlive-pagecolor)
+msgid "Interrogate page colour"
msgstr ""
-#. description(texlive-initials:texlive-initials-fonts)
-msgid "The separated fonts package for texlive-initials"
+#. description(texlive-specs-q:texlive-pagecolor)
+msgid ""
+"This package provides the command \\thepagecolor, which gives the current page (background) colour, i. e. the argument used with the most recent call of \\pagecolor{...}. The command \\thepagecolornone gives the same colour as \\thepagecolor, except when the page background colour is \"none\" (e.g., as a result of using the \\nopagecolor command). In that case \\thepagecolor is \"white\" and \\thepagecolornone is \"none\".\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ipaex:texlive-ipaex-fonts)
-msgid "The separated fonts package for texlive-ipaex"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pagecolor-doc)
+#, fuzzy
+msgid "Documentation for texlive-pagecolor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ipaex-type1:texlive-ipaex-type1-fonts)
+#. description(texlive-specs-q:texlive-pagecolor-doc)
#, fuzzy
-msgid "The separated fonts package for texlive-ipaex-type1"
-msgstr "Vývojářský balík pro libstroke"
+msgid "This package includes the documentation for texlive-pagecolor"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-iwona:texlive-iwona-fonts)
-msgid "The separated fonts package for texlive-iwona"
+#. summary(texlive-specs-q:texlive-pagecont)
+msgid "Page numbering that continues between documents"
msgstr ""
-#. description(texlive-jmn:texlive-jmn-fonts)
-msgid "The separated fonts package for texlive-jmn"
+#. description(texlive-specs-q:texlive-pagecont)
+msgid ""
+"The package provides the facility that several documents can be typeset independently with page numbers in sequence, as if they were a single document.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-junicode:texlive-junicode-fonts)
-msgid "The separated fonts package for texlive-junicode"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pagecont-doc)
+#, fuzzy
+msgid "Documentation for texlive-pagecont"
+msgstr "Dokumentace pro castor"
-#. description(texlive-kerkis:texlive-kerkis-fonts)
-msgid "The separated fonts package for texlive-kerkis"
-msgstr ""
+#. description(texlive-specs-q:texlive-pagecont-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pagecont"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-knitting:texlive-knitting-fonts)
-msgid "The separated fonts package for texlive-knitting"
+#. summary(texlive-specs-q:texlive-pagenote)
+msgid "Notes at end of document"
msgstr ""
-#. description(texlive-kpfonts:texlive-kpfonts-fonts)
-msgid "The separated fonts package for texlive-kpfonts"
+#. description(texlive-specs-q:texlive-pagenote)
+msgid ""
+"The pagenote package provides tagged notes on a separate page (also known as 'end notes'). Unless the memoir class is used, the package requires the ifmtarg package.\n"
+"\n"
+"date: 2011-11-22 16:27:41 +0000"
msgstr ""
-#. description(texlive-kurier:texlive-kurier-fonts)
-msgid "The separated fonts package for texlive-kurier"
+#. summary(texlive-specs-q:texlive-pagenote-doc)
+#, fuzzy
+msgid "Documentation for texlive-pagenote"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pagenote-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pagenote"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pagerange)
+msgid "Flexible and configurable page range typesetting"
msgstr ""
-#. description(texlive-lato:texlive-lato-fonts)
-msgid "The separated fonts package for texlive-lato"
+#. description(texlive-specs-q:texlive-pagerange)
+msgid ""
+"The package defines a command \\pagerange that typesets ranges of page numbers, expanding them (e.g., adding first or last page numbers) and standardising them.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-libertine:texlive-libertine-fonts)
+#. summary(texlive-specs-q:texlive-pagerange-doc)
#, fuzzy
-msgid "The separated fonts package for texlive-libertine"
-msgstr "Vývojářský balík pro libstroke"
+msgid "Documentation for texlive-pagerange"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-librebaskerville:texlive-librebaskerville-fonts)
+#. description(texlive-specs-q:texlive-pagerange-doc)
#, fuzzy
-#| msgid "Development package for libstroke"
-msgid "The separated fonts package for texlive-librebaskerville"
-msgstr "Vývojářský balík pro libstroke"
+msgid "This package includes the documentation for texlive-pagerange"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-libris:texlive-libris-fonts)
-msgid "The separated fonts package for texlive-libris"
+#. summary(texlive-specs-q:texlive-pageslts)
+msgid "Variants of last page labels"
msgstr ""
-#. description(texlive-linearA:texlive-linearA-fonts)
-msgid "The separated fonts package for texlive-linearA"
+#. description(texlive-specs-q:texlive-pageslts)
+msgid ""
+"The package was designed as an extension of the lastpage package -- as well as that package's LastPage label (created \\AtEndDocument) it adds a VeryLastPage (created \\AfterLastShipout). When more than one page numbering scheme is in operation (as in a book class document with frontmatter), the labels above do not give the total number of pages, so the package also provides labels pagesLTS.<numbering scheme>, where the numbering scheme is arabic, roman, etc. The package relies on the undolabl package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lm:texlive-lm-fonts)
-msgid "The separated fonts package for texlive-lm"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pageslts-doc)
+#, fuzzy
+msgid "Documentation for texlive-pageslts"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lm-math:texlive-lm-math-fonts)
+#. description(texlive-specs-q:texlive-pageslts-doc)
#, fuzzy
-msgid "The separated fonts package for texlive-lm-math"
-msgstr "Vývojářský balík pro libstroke"
+msgid "This package includes the documentation for texlive-pageslts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lxfonts:texlive-lxfonts-fonts)
-msgid "The separated fonts package for texlive-lxfonts"
+#. summary(texlive-specs-q:texlive-palatino-fonts)
+msgid "Severed fonts for texlive-palatino"
msgstr ""
-#. description(texlive-manfnt:texlive-manfnt-fonts)
-msgid "The separated fonts package for texlive-manfnt"
+#. description(texlive-specs-q:texlive-palatino-fonts)
+msgid "The separated fonts package for texlive-palatino"
msgstr ""
-#. description(texlive-marvosym:texlive-marvosym-fonts)
-msgid "The separated fonts package for texlive-marvosym"
+#. summary(texlive-specs-q:texlive-paper)
+msgid "Versions of article class, tuned for scholarly publications"
msgstr ""
-#. description(texlive-mathabx-type1:texlive-mathabx-type1-fonts)
-msgid "The separated fonts package for texlive-mathabx-type1"
+#. description(texlive-specs-q:texlive-paper)
+msgid ""
+"A pair of classes derived from article, tuned for producing papers for journals. The classes introduce new layout options and font commands for sections/parts, and define a new keywords environment, subtitle and institution commands for the title section and new commands for revisions.\n"
+"\n"
+"date: 2012-01-13 08:08:17 +0000"
msgstr ""
-#. description(texlive-mathdesign:texlive-mathdesign-fonts)
-msgid "The separated fonts package for texlive-mathdesign"
-msgstr ""
+#. summary(texlive-specs-q:texlive-paper-doc)
+#, fuzzy
+msgid "Documentation for texlive-paper"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mathpazo:texlive-mathpazo-fonts)
-msgid "The separated fonts package for texlive-mathpazo"
-msgstr ""
+#. description(texlive-specs-q:texlive-paper-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-paper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mdsymbol:texlive-mdsymbol-fonts)
-msgid "The separated fonts package for texlive-mdsymbol"
+#. summary(texlive-specs-q:texlive-papercdcase)
+msgid "Origami-style folding paper CD case"
msgstr ""
-#. description(texlive-metapost:texlive-metapost-fonts)
-msgid "The separated fonts package for texlive-metapost"
+#. description(texlive-specs-q:texlive-papercdcase)
+msgid ""
+"This package implements a LaTeX style file to produce origami- style folding paper CD cases.\n"
+"\n"
+"date: 2012-06-11 10:09:17 +0000"
msgstr ""
-#. description(texlive-mflogo:texlive-mflogo-fonts)
-msgid "The separated fonts package for texlive-mflogo"
+#. summary(texlive-specs-q:texlive-papercdcase-doc)
+#, fuzzy
+msgid "Documentation for texlive-papercdcase"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-papercdcase-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-papercdcase"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-papermas)
+msgid "Compute the mass of a printed version of a document"
msgstr ""
-#. description(texlive-mnsymbol:texlive-mnsymbol-fonts)
-msgid "The separated fonts package for texlive-mnsymbol"
+#. description(texlive-specs-q:texlive-papermas)
+msgid ""
+"The package computes the number of sheets of paper used by, and hence the mass of a document. This is useful (for example) when calculating postal charges.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-montex:texlive-montex-fonts)
-msgid "The separated fonts package for texlive-montex"
+#. summary(texlive-specs-q:texlive-papermas-doc)
+#, fuzzy
+msgid "Documentation for texlive-papermas"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-q:texlive-papermas-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-papermas"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-papertex)
+msgid "Class for newspapers, etcetera"
msgstr ""
-#. description(texlive-musixtex-fonts:texlive-musixtex-fonts-fonts)
-msgid "The separated fonts package for texlive-musixtex-fonts"
+#. description(texlive-specs-q:texlive-papertex)
+msgid ""
+"This class allows LaTeX users to create a paperTeX newspaper. The final document has a front page and as many inner pages as desired. News items appear one after another and the user can choose the number of columns, style and so on. The class allows users to create newsletters too.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mxedruli:texlive-mxedruli-fonts)
+#. summary(texlive-specs-q:texlive-papertex-doc)
#, fuzzy
-msgid "The separated fonts package for texlive-mxedruli"
-msgstr "Vývojářský balík pro libstroke"
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-papertex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-nanumtype1:texlive-nanumtype1-fonts)
+#. description(texlive-specs-q:texlive-papertex-doc)
#, fuzzy
-msgid "The separated fonts package for texlive-nanumtype1"
-msgstr "Vývojářský balík pro libstroke"
+msgid "This package includes the documentation for texlive-papertex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ncntrsbk:texlive-ncntrsbk-fonts)
-msgid "The separated fonts package for texlive-ncntrsbk"
+#. summary(texlive-specs-q:texlive-paracol)
+msgid "Multiple columns with texts \"in parallel\""
msgstr ""
-#. description(texlive-newpx:texlive-newpx-fonts)
+#. description(texlive-specs-q:texlive-paracol)
+msgid ""
+"The package provides yet another multi-column typesetting mechanism by which you produce multi-column (e.g., bilingual) document switching and sychronizing each corresponding part in \"parallel\".\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-q:texlive-paracol-doc)
#, fuzzy
-msgid "The separated fonts package for texlive-newpx"
-msgstr "Vývojářský balík pro libstroke"
+msgid "Documentation for texlive-paracol"
+msgstr "Dokumentace pro castor"
-#. description(texlive-newtx:texlive-newtx-fonts)
-msgid "The separated fonts package for texlive-newtx"
-msgstr ""
+#. description(texlive-specs-q:texlive-paracol-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-paracol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ocherokee:texlive-ocherokee-fonts)
-msgid "The separated fonts package for texlive-ocherokee"
+#. summary(texlive-specs-q:texlive-paralist)
+msgid "Enumerate and itemize within paragraphs"
msgstr ""
-#. description(texlive-ocr-b-outline:texlive-ocr-b-outline-fonts)
-msgid "The separated fonts package for texlive-ocr-b-outline"
+#. description(texlive-specs-q:texlive-paralist)
+msgid ""
+"Provides enumerate and itemize environments that can be used within paragraphs to format the items either as running text or as separate paragraphs with a preceding number or symbol. Also provides compacted versions of enumerate and itemize.\n"
+"\n"
+"date: 2013-06-13 17:52:23 +0000"
msgstr ""
-#. description(texlive-oinuit:texlive-oinuit-fonts)
-msgid "The separated fonts package for texlive-oinuit"
+#. summary(texlive-specs-q:texlive-paralist-doc)
+#, fuzzy
+msgid "Documentation for texlive-paralist"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-paralist-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-paralist"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-parallel)
+msgid "Typeset parallel texts"
msgstr ""
-#. description(texlive-oldstandard:texlive-oldstandard-fonts)
-msgid "The separated fonts package for texlive-oldstandard"
+#. description(texlive-specs-q:texlive-parallel)
+msgid ""
+"Provides a parallel environment which allows two potentially different texts to be typeset in two columns, while maintaining alignment. The two columns may be on the same page, or on facing pages. This arrangement of text is commonly used when typesetting translations, but it can have value when comparing any two texts.\n"
+"\n"
+"date: 2011-09-22 13:24:20 +0000"
msgstr ""
-#. description(texlive-omega:texlive-omega-fonts)
-msgid "The separated fonts package for texlive-omega"
+#. summary(texlive-specs-q:texlive-parallel-doc)
+#, fuzzy
+msgid "Documentation for texlive-parallel"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-q:texlive-parallel-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-parallel"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-paratype)
+msgid "LaTeX support for free fonts by ParaType"
msgstr ""
-#. description(texlive-opensans:texlive-opensans-fonts)
-msgid "The separated fonts package for texlive-opensans"
+#. description(texlive-specs-q:texlive-paratype)
+msgid ""
+"The package offers LaTeX support for the fonts PT Sans, PT Serif and PT Mono developed by ParaType for the project \"Public Types of Russian Federation\", and released under an open user license. The fonts themselves are provided in both the TrueType and Type 1 formats, both created by ParaType). The fonts provide encodings OT1, T1, IL2, TS1, T2* and X2. The package provides a convenient replacement of the two packages ptsans and ptserif.\n"
+"\n"
+"date: 2014-05-17 19:41:14 +0000"
msgstr ""
-#. description(texlive-palatino:texlive-palatino-fonts)
-msgid "The separated fonts package for texlive-palatino"
+#. summary(texlive-specs-q:texlive-paratype-doc)
+#, fuzzy
+msgid "Documentation for texlive-paratype"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-q:texlive-paratype-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-paratype"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-paratype-fonts)
+msgid "Severed fonts for texlive-paratype"
msgstr ""
-#. description(texlive-paratype:texlive-paratype-fonts)
+#. description(texlive-specs-q:texlive-paratype-fonts)
msgid "The separated fonts package for texlive-paratype"
msgstr ""
-#. description(texlive-persian-modern:texlive-persian-modern-fonts)
-msgid "The separated fonts package for texlive-persian-modern"
+#. summary(texlive-specs-q:texlive-paresse)
+msgid "Define simple macros for greek letters"
msgstr ""
-#. description(texlive-phaistos:texlive-phaistos-fonts)
-msgid "The separated fonts package for texlive-phaistos"
+#. description(texlive-specs-q:texlive-paresse)
+msgid ""
+"The package defines macros using SS to type greek letters. so that the user may (for example) type SSa to get the effect of $\\alpha$.\n"
+"\n"
+"date: 2013-02-16 12:58:07 +0000"
msgstr ""
-#. description(texlive-philokalia:texlive-philokalia-fonts)
-msgid "The separated fonts package for texlive-philokalia"
-msgstr ""
+#. summary(texlive-specs-q:texlive-paresse-doc)
+#, fuzzy
+msgid "Documentation for texlive-paresse"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pigpen:texlive-pigpen-fonts)
-msgid "The separated fonts package for texlive-pigpen"
-msgstr ""
+#. description(texlive-specs-q:texlive-paresse-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-paresse"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pl:texlive-pl-fonts)
-msgid "The separated fonts package for texlive-pl"
+#. summary(texlive-specs-q:texlive-parnotes)
+msgid "Notes after every paragraph (or elsewhere)"
msgstr ""
-#. description(texlive-poltawski:texlive-poltawski-fonts)
-msgid "The separated fonts package for texlive-poltawski"
+#. description(texlive-specs-q:texlive-parnotes)
+msgid ""
+"The package provides the \\parnote command. The notes are set as (normal) running paragraphs; placement is at the end of each paragraph, or manually, using the \\parnotes command.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-prodint:texlive-prodint-fonts)
-msgid "The separated fonts package for texlive-prodint"
-msgstr ""
+#. summary(texlive-specs-q:texlive-parnotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-parnotes"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ptex:texlive-ptex-fonts)
-msgid "The separated fonts package for texlive-ptex"
-msgstr ""
+#. description(texlive-specs-q:texlive-parnotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-parnotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-punknova:texlive-punknova-fonts)
-msgid "The separated fonts package for texlive-punknova"
+#. summary(texlive-specs-q:texlive-parrun)
+msgid "Typesets (two) streams of text running parallel"
msgstr ""
-#. description(texlive-pxfonts:texlive-pxfonts-fonts)
-msgid "The separated fonts package for texlive-pxfonts"
+#. description(texlive-specs-q:texlive-parrun)
+msgid ""
+"For typesetting translated text and the original source, parallel on the same page, one above the other.\n"
+"\n"
+"date: 2012-06-09 18:15:34 +0000"
msgstr ""
-#. description(texlive-quattrocento:texlive-quattrocento-fonts)
-msgid "The separated fonts package for texlive-quattrocento"
-msgstr ""
+#. summary(texlive-specs-q:texlive-parrun-doc)
+#, fuzzy
+msgid "Documentation for texlive-parrun"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-raleway:texlive-raleway-fonts)
-msgid "The separated fonts package for texlive-raleway"
-msgstr ""
+#. description(texlive-specs-q:texlive-parrun-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-parrun"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-recycle:texlive-recycle-fonts)
-msgid "The separated fonts package for texlive-recycle"
+#. summary(texlive-specs-q:texlive-parselines)
+msgid "Apply a macro to each line of an environment"
msgstr ""
-#. description(texlive-romande:texlive-romande-fonts)
-msgid "The separated fonts package for texlive-romande"
+#. description(texlive-specs-q:texlive-parselines)
+msgid ""
+"The package defines an environment \"parse lines\" which processes each line of an environment with a macro. An example of shading the lines of an environment is given.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-rsfs:texlive-rsfs-fonts)
-msgid "The separated fonts package for texlive-rsfs"
-msgstr ""
+#. summary(texlive-specs-q:texlive-parselines-doc)
+#, fuzzy
+msgid "Documentation for texlive-parselines"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sanskrit:texlive-sanskrit-fonts)
-msgid "The separated fonts package for texlive-sanskrit"
-msgstr ""
+#. description(texlive-specs-q:texlive-parselines-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-parselines"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sansmathfonts:texlive-sansmathfonts-fonts)
-msgid "The separated fonts package for texlive-sansmathfonts"
+#. summary(texlive-specs-q:texlive-parskip)
+msgid "Layout with zero \\parindent, non-zero \\parskip"
msgstr ""
-#. description(texlive-semaphor:texlive-semaphor-fonts)
-msgid "The separated fonts package for texlive-semaphor"
+#. description(texlive-specs-q:texlive-parskip)
+msgid ""
+"Simply changing \\parskip and \\parindent leaves a layout that is untidy; this package (though it is no substitute for a properly-designed class) helps alleviate this untidiness\n"
+"\n"
+"date: 2013-09-30 12:43:32 +0000"
msgstr ""
-#. description(texlive-skaknew:texlive-skaknew-fonts)
-msgid "The separated fonts package for texlive-skaknew"
-msgstr ""
+#. summary(texlive-specs-q:texlive-parskip-doc)
+#, fuzzy
+msgid "Documentation for texlive-parskip"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sourcecodepro:texlive-sourcecodepro-fonts)
-msgid "The separated fonts package for texlive-sourcecodepro"
-msgstr ""
+#. description(texlive-specs-q:texlive-parskip-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-parskip"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sourcesanspro:texlive-sourcesanspro-fonts)
-msgid "The separated fonts package for texlive-sourcesanspro"
+#. summary(texlive-specs-q:texlive-pas-cours)
+msgid "Macros useful in preparing teaching material"
msgstr ""
-#. description(texlive-starfont:texlive-starfont-fonts)
-msgid "The separated fonts package for texlive-starfont"
+#. description(texlive-specs-q:texlive-pas-cours)
+msgid ""
+"Several groups of macros cover different branches of mathematics.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-staves:texlive-staves-fonts)
-msgid "The separated fonts package for texlive-staves"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pas-cours-doc)
+#, fuzzy
+msgid "Documentation for texlive-pas-cours"
+msgstr "Dokumentace pro castor"
-#. description(texlive-stix:texlive-stix-fonts)
-msgid "The separated fonts package for texlive-stix"
-msgstr ""
+#. description(texlive-specs-q:texlive-pas-cours-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pas-cours"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-stmaryrd:texlive-stmaryrd-fonts)
-msgid "The separated fonts package for texlive-stmaryrd"
+#. summary(texlive-specs-q:texlive-pas-crosswords)
+msgid "Creating crossword grids, using TikZ"
msgstr ""
-#. description(texlive-superiors:texlive-superiors-fonts)
-msgid "The separated fonts package for texlive-superiors"
+#. description(texlive-specs-q:texlive-pas-crosswords)
+msgid ""
+"The package produces crossword grids, using a wide variety of colours and decorations of the grids and the text in them. The package uses TikZ for its graphical output.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-symbol:texlive-symbol-fonts)
-msgid "The separated fonts package for texlive-symbol"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pas-crosswords-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pas-crosswords"
+msgstr "Dokumentace pro castor"
-#. description(texlive-tabvar:texlive-tabvar-fonts)
-msgid "The separated fonts package for texlive-tabvar"
-msgstr ""
+#. description(texlive-specs-q:texlive-pas-crosswords-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pas-crosswords"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tapir:texlive-tapir-fonts)
-msgid "The separated fonts package for texlive-tapir"
+#. summary(texlive-specs-q:texlive-pas-cv)
+msgid "Flexible typesetting of Curricula Vitae"
msgstr ""
-#. description(texlive-tex-gyre:texlive-tex-gyre-fonts)
-msgid "The separated fonts package for texlive-tex-gyre"
+#. description(texlive-specs-q:texlive-pas-cv)
+msgid ""
+"The package provides the framework for typesetting a Curriculum Vitae (composed in French), together with a number of \"themes\" that may be used with the package. (The use of the themes may be seen in the package's examples/ collection.) The author hints that conversion for use with other languages (than French) should be possible.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex-gyre-math:texlive-tex-gyre-math-fonts)
-msgid "The separated fonts package for texlive-tex-gyre-math"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pas-cv-doc)
+#, fuzzy
+msgid "Documentation for texlive-pas-cv"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tfrupee:texlive-tfrupee-fonts)
-msgid "The separated fonts package for texlive-tfrupee"
-msgstr ""
+#. description(texlive-specs-q:texlive-pas-cv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pas-cv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-times:texlive-times-fonts)
-msgid "The separated fonts package for texlive-times"
+#. summary(texlive-specs-q:texlive-pas-tableur)
+msgid "Create a spreadsheet layout"
msgstr ""
-#. description(texlive-tipa:texlive-tipa-fonts)
-msgid "The separated fonts package for texlive-tipa"
+#. description(texlive-specs-q:texlive-pas-tableur)
+msgid ""
+"The package provides commands for creating a grid of rectangles, and commands for populating locations in the grid. PGF/TikZ is used for placement and population of the cells.\n"
+"\n"
+"date: 2014-04-17 17:41:18 +0000"
msgstr ""
-#. description(texlive-trajan:texlive-trajan-fonts)
-msgid "The separated fonts package for texlive-trajan"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pas-tableur-doc)
+#, fuzzy
+msgid "Documentation for texlive-pas-tableur"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-txfonts:texlive-txfonts-fonts)
-msgid "The separated fonts package for texlive-txfonts"
-msgstr ""
+#. description(texlive-specs-q:texlive-pas-tableur-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pas-tableur"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-txfontsb:texlive-txfontsb-fonts)
-msgid "The separated fonts package for texlive-txfontsb"
+#. summary(texlive-specs-q:texlive-passivetex)
+msgid "Support package for XML/SGML typesetting"
msgstr ""
-#. description(texlive-uhc:texlive-uhc-fonts)
-msgid "The separated fonts package for texlive-uhc"
+#. description(texlive-specs-q:texlive-passivetex)
+msgid ""
+"Packages providing XML parsing, UTF-8 parsing, Unicode entities, and common formatting object definitions for jadetex.\n"
+"\n"
+"date: 2011-10-29 20:37:48 +0000"
msgstr ""
-#. description(texlive-umtypewriter:texlive-umtypewriter-fonts)
-msgid "The separated fonts package for texlive-umtypewriter"
+#. summary(texlive-specs-q:texlive-patch)
+msgid "Patch loaded packages, etcetera"
msgstr ""
-#. description(texlive-utopia:texlive-utopia-fonts)
-msgid "The separated fonts package for texlive-utopia"
+#. description(texlive-specs-q:texlive-patch)
+msgid ""
+"The package defines macros that allow patching of existing commands, specifying those parts of the existing macro to be replaced, along with the replacements. Thus it provides more sophisticated manipulation than a package like patchcmd, which only permits modification by adding commands at the beginning or end of an existing definition. The package is distributed in a relative of LaTeX doc format: it will run unmodified, though it benefits from docstrip treatment.\n"
+"\n"
+"date: 2012-03-13 22:16:04 +0000"
msgstr ""
-#. description(texlive-velthuis:texlive-velthuis-fonts)
-msgid "The separated fonts package for texlive-velthuis"
+#. summary(texlive-specs-q:texlive-patchcmd)
+msgid "Change the definition of an existing command"
msgstr ""
-#. description(texlive-venturisadf:texlive-venturisadf-fonts)
-msgid "The separated fonts package for texlive-venturisadf"
+#. description(texlive-specs-q:texlive-patchcmd)
+msgid ""
+"The package provides a command \\patchcommand that can be used to add material at the beginning and/or the end of the replacement text of an existing macro. It works for macros with any number of normal arguments, including those that were defined with \\DeclareRobustCommand.\n"
+"\n"
+"date: 2012-06-09 18:15:34 +0000"
msgstr ""
-#. description(texlive-vntex:texlive-vntex-fonts)
-msgid "The separated fonts package for texlive-vntex"
-msgstr ""
+#. summary(texlive-specs-q:texlive-patchcmd-doc)
+#, fuzzy
+msgid "Documentation for texlive-patchcmd"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-wadalab:texlive-wadalab-fonts)
-msgid "The separated fonts package for texlive-wadalab"
-msgstr ""
+#. description(texlive-specs-q:texlive-patchcmd-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-patchcmd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-wasy:texlive-wasy-fonts)
-msgid "The separated fonts package for texlive-wasy"
+#. summary(texlive-specs-q:texlive-patgen)
+msgid "Generate hyphenation patterns"
msgstr ""
-#. description(texlive-xits:texlive-xits-fonts)
-msgid "The separated fonts package for texlive-xits"
+#. description(texlive-specs-q:texlive-patgen)
+msgid ""
+"This is the last version of the program distributed by Knuth; it advertises itself as a pattern generator for \"the algorithm used in TeX\", but, of course, the patterns used in modern distributions are Unicode-based.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xypic:texlive-xypic-fonts)
-msgid "The separated fonts package for texlive-xypic"
+#. summary(texlive-specs-q:texlive-patgen2-tutorial)
+msgid "A tutorial on the use of Patgen 2"
msgstr ""
-#. description(texlive-yhmath:texlive-yhmath-fonts)
-msgid "The separated fonts package for texlive-yhmath"
+#. description(texlive-specs-q:texlive-patgen2-tutorial)
+msgid ""
+"This document describes the use of Patgen 2 to create hyphenation patterns for wide ranges of languages.\n"
+"\n"
+"date: 2012-06-09 18:15:34 +0000"
msgstr ""
-#. description(texlive-zapfchan:texlive-zapfchan-fonts)
-msgid "The separated fonts package for texlive-zapfchan"
+#. summary(texlive-specs-q:texlive-path)
+msgid "Typeset paths, making them breakable"
msgstr ""
-#. description(texlive-zapfding:texlive-zapfding-fonts)
-msgid "The separated fonts package for texlive-zapfding"
+#. description(texlive-specs-q:texlive-path)
+msgid ""
+"Defines a macro \\path|...|, similar to the LaTeX \\verb|...|, that sets the text in typewriter font and allows hyphen-less breaks at punctuation characters. The set of characters to be regarded as punctuation may be changed from the package's default.\n"
+"\n"
+"date: 2012-06-11 10:09:17 +0000"
msgstr ""
-#. summary(texlive-persian-modern)
-msgid "The \"Persian Modern\" family of fonts"
-msgstr ""
+#. summary(texlive-specs-q:texlive-path-doc)
+#, fuzzy
+msgid "Documentation for texlive-path"
+msgstr "Dokumentace pro adaptx"
-#. description(vim-plugins:vim-plugin-taglist)
-msgid "The \"Tag List\" plugin is a source code browser plugin for Vim and provides an overview of the structure of source code files and allows you to efficiently browse through source code files for different programming languages."
+#. description(texlive-specs-q:texlive-path-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-path"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pauldoc)
+msgid "German LaTeX package documentation"
msgstr ""
-#. description(texlive-l2tabu)
+#. description(texlive-specs-q:texlive-pauldoc)
msgid ""
-"The \"sins\" of LaTeX users, and how to correct them. The document provides a list of obsolete packages and commands (this original is in German; it has been translated into English, French, Italian and Spanish).\n"
+"The package provides helpers for German language package documentation.\n"
"\n"
-"date: 2011-09-20 22:38:26 +0000"
+"date: 2012-05-31 16:34:59 +0000"
msgstr ""
-#. description(texlive-lps)
-msgid ""
-"The 'Logic and Philosophy of Science' journal is an online publication of the University of Trieste (Italy). The class builds on the standard article class to offer a format that LaTeX authors may use when submitting to the journal.\n"
-"\n"
-"date: 2011-02-03 15:11:01 +0000"
+#. summary(texlive-specs-q:texlive-pauldoc-doc)
+#, fuzzy
+msgid "Documentation for texlive-pauldoc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pauldoc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pauldoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pawpict)
+msgid "Using graphics from PAW"
msgstr ""
-#. description(texlive-pst-abspos)
+#. description(texlive-specs-q:texlive-pawpict)
msgid ""
-"The (PSTricks-related) package provides a command \\pstPutAbs(x,y) to put an object at an arbitrary absolute (or even a relative) position on the page.\n"
+"Support for the easy inclusion of graphics made by PAW (Physics Analysis Workstation). You need to have PAW installed on your system to benefit from this package.\n"
"\n"
-"date: 2009-11-10 08:17:41 +0000"
+"date: 2012-05-31 16:34:59 +0000"
msgstr ""
-#. description(texlive-pst-exa)
-msgid ""
-"The (PSTricks-related) package provides an environment PSTexample to put code and output side by side or one above the other.\n"
-"\n"
-"date: 2011-04-14 17:55:22 +0000"
+#. summary(texlive-specs-q:texlive-pawpict-doc)
+#, fuzzy
+msgid "Documentation for texlive-pawpict"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pawpict-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pawpict"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pax)
+msgid "Extract and reinsert PDF annotations with pdfTeX"
msgstr ""
-#. description(texlive-texdef)
+#. description(texlive-specs-q:texlive-pax)
msgid ""
-"The (Perl) script displays the definition of (La)TeX command sequences/macros. Various options allow the selection of the used class and package files and other things which can have influence on the definition (before/after the preamble, inside an environment, ...). The script creates a temporary TeX file which is then compiled using (La)TeX to find the '\\meaning' of the command sequence. The result is formatted and presented to the user. Length or number command sequences (dimensions, \\char..., count registers, ...) are recognized and the contained value is also shown (using \\the). Special definitions like protected macros are also recognized and the underlying macros are shown as well. The script will show plain TeX definitions by default. LaTeX and ConTeXt are supported, including flavours (pdf(la)tex, lua(la)tex, xe(la)tex, ...). The flavour can be selected using an command line option or over the script name: latexdef will use LaTeX as default, etc.\n"
+"If PDF files are included using pdfTeX, PDF annotations are stripped. The pax project offers a solution without altering pdfTeX. A Java program (pax.jar) parses the PDF file that will later be included. The program then writes the data of the annotations into a file that can be read by TeX. The LaTeX package pax extends the graphics package to support the scheme: if a PDF file is included, the package looks for the file with the annotation data, reads them and puts the annotations in the right place. Project status: experimental\n"
"\n"
-"date: 2012-05-15 13:44:48 +0000"
+"date: 2012-11-14 16:56:09 +0000"
msgstr ""
-#. description(xmldb-api)
-msgid "The API interfaces are what driver developers must implement when creating a new driver and are the interfaces that applications are developed against. Along with the interfaces a concrete DriverManager implementation is also provides."
+#. summary(texlive-specs-q:texlive-pax-doc)
+#, fuzzy
+msgid "Documentation for texlive-pax"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pax-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pax"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pb-diagram)
+msgid "A commutative diagram package using LAMSTeX or Xy-pic fonts"
msgstr ""
-#. description(texlive-tpic2pdftex)
+#. description(texlive-specs-q:texlive-pb-diagram)
msgid ""
-"The AWK script converts pic language, embedded inline (delimited by .PS and .PE markers), to \\pdfliteral commands.\n"
+"The pb-diagram package\n"
"\n"
-"date: 2012-08-23 22:56:38 +0000"
+"date: 2012-06-11 10:09:17 +0000"
msgstr ""
-#. description(texlive-utopia)
-msgid ""
-"The Adobe Standard Encoding set (upright and italic shapes, medium and bold weights) of the Utopia font family, which Adobe donated to the X Consortium. Macro support, and maths fonts that match the Utopia family, are provided by the Fourier and the Mathdesign Utopia font packages.\n"
-"\n"
-"date: 2007-10-04 08:35:17 +0000"
+#. summary(texlive-specs-q:texlive-pb-diagram-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-pb-diagram"
+msgstr "Dokumentace pro digiKam"
+
+#. description(texlive-specs-q:texlive-pb-diagram-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pb-diagram"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pbox)
+msgid "A variable-width \\parbox command"
msgstr ""
-#. description(texlive-mdputu)
+#. description(texlive-specs-q:texlive-pbox)
msgid ""
-"The Annals of Mathematics uses italics for theorems. However, slanted digits and parentheses look disturbing when surrounded by (upright) mathematics. This package provides virtual fonts with italics and upright digits and punctuation, as an extension to Mathdesign Utopia.\n"
+"Defines a command \\pbox{<max width>}{<text>} which adjusts its width to that of the enclosed text, up to the maximum width given. The package also defines some associated length commands.\n"
"\n"
-"date: 2010-11-03 14:55:25 +0000"
+"date: 2011-12-10 14:11:47 +0000"
msgstr ""
-#. description(texlive-IEEEconf)
-msgid ""
-"The IEEEconf class implements the formatting dictated by the IEEE Computer Society Press for conference proceedings.\n"
-"\n"
-"date: 2009-04-06 18:17:45 +0000"
+#. summary(texlive-specs-q:texlive-pbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-pbox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pbsheet)
+msgid "Problem sheet class"
msgstr ""
-#. description(texlive-limap)
+#. description(texlive-specs-q:texlive-pbsheet)
msgid ""
-"The Information Mapping method provides a methodology for structuring and presenting information. It claims to be useful for readers who are more concerned about finding the right information than reading the document as a whole. Thus short, highly structured, and context free pieces of information are used. A LaTeX style and a LaTeX class are provided. The style contains definitions to typeset maps and blocks according to the Information Mapping method. The class provides all definitions to typeset a whole document.\n"
+"This class is designed to simplify the typesetting of problem sheets with Mathematics and Computer Science content. It is currently customised towards teaching in French (and the examples are in French).\n"
"\n"
-"date: 2007-01-08 22:14:30 +0000"
+"date: 2012-06-11 10:09:17 +0000"
msgstr ""
-#. description(texlive-ijmart)
-msgid ""
-"The Israel Journal of Mathematics is published by The Hebrew University Magnes Press. This class provides LaTeX support for its authors and editors. It strives to achieve the distinct \"look and feel\" of the journal, while having the interface similar to that of the amsart document class. This will help authors already familiar with amsart to easily submit manuscripts for The Israel Journal of Mathematics or to put the preprints in arXiv with minimal changes in the LaTeX source.\n"
-"\n"
-"date: 2010-10-30 11:33:19 +0000"
+#. summary(texlive-specs-q:texlive-pbsheet-doc)
+#, fuzzy
+msgid "Documentation for texlive-pbsheet"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pbsheet-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pbsheet"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdf-trans)
+msgid "A set of macros for various transformations of TeX boxes"
msgstr ""
-#. description(texlive-kixfont)
+#. description(texlive-specs-q:texlive-pdf-trans)
msgid ""
-"The KIX code is a barcode-like format used by the Dutch PTT to encode country codes, zip codes and street numbers in a machine-readable format. If printed below the address line on bulk mailings, a discount can be obtained. The font is distributed in MetaFont format, and covers the numbers and upper-case letters.\n"
+"pdf-trans is a set of macros offering various transformations of TeX boxes (based on plain and pdfeTeX primitives). It was initially inspired by trans.tex, remade to work with pdfTeX.\n"
"\n"
-"date: 2007-10-05 18:57:01 +0000"
+"date: 2014-01-28 17:35:23 +0000"
msgstr ""
-#. description(texlive-koma-script)
-msgid ""
-"The KOMA-Script bundle provides drop-in replacements for the article/report/book classes with emphasis on typography and versatility. There is also a letter class, different from all other letter classes. The bundle also offers: - a package for calculating type areas in the way laid down by the typographer Jan Tschichold, - a package for easily changing and defining page styles, - a package scrdate for getting not only the current date but also the name of the day, and - a package scrtime for getting the current time. All these packages may be used not only with KOMA-Script classes but also with the standard classes. Since every package has its own version number, the version number quoted only refers to the version of scrbook, scrreprt, scrartcl, scrlttr2 and typearea. These are the main parts of the bundle.\n"
-"\n"
-"date: 2013-02-07 16:36:02 +0000"
+#. summary(texlive-specs-q:texlive-pdf-trans-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdf-trans"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdf-trans-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdf-trans"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdf14)
+msgid "Restore PDF 1.4 to a TeX live 2010 format"
msgstr ""
-#. description(texlive-lgrx)
+#. description(texlive-specs-q:texlive-pdf14)
msgid ""
-"The LGRx bundle provides packages and definitions for typesetting Greek text with fonts in the LGR encoding, the de- facto standard set by babel. It includes a comprehensive font definition file, support for Unicode input and macros for Greek letters in non-Greek text.\n"
+"Starting with TeX Live 2010, the various formats, that directly generate PDF, default to generating PDF 1.5. This is generally a good thing, but it can lead to compatibility issues with some older PDF viewers. This package changes the version of PDF generated with formats (based on pdfTeX or LuaTeX in PDF mode), back to 1.4 for documents that need to achieve maximal compatibility with old viewers.\n"
"\n"
-"date: 2013-05-08 09:19:07 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lh)
+#. summary(texlive-specs-q:texlive-pdf14-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdf14"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdf14-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdf14"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfcomment)
+msgid "A user-friendly interface to pdf annotations"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-pdfcomment)
msgid ""
-"The LH fonts address the problem of the wide variety of alphabets that are written with Cyrillic-style characters. The fonts are the original basis of the set of T2* and X2 encodings that are now used when LaTeX users need to write in Cyrillic languages. Macro support in standard LaTeX encodings is offered through the cyrillic and t2 bundles, and the package itself offers support for other (more traditional) encodings. The fonts, in the standard T2* and X2 encodings are available in Adobe Type 1 format, in the CM-Super family of fonts. The package also offers its own LaTeX support for OT2 encoded fonts, CM bright shaped fonts and Concrete shaped fonts.\n"
+"For a long time pdfLaTeX has offered the command \\pdfannot for inserting arbitrary PDF annotations. However, the command is presented in a form where additional knowledge of the definition of the PDF format is indispensable. This package is an answer to the - occasional - questions in newsgroups, about how one could use the comment function of Adobe Reader. At least for the writer of LaTeX code, the package offers a convenient and user-friendly means of using \\pdfannot to provide comments in PDF files. Since version v1.1, pdfcomment.sty also supports LaTeX - dvips - ps2pdf, LaTeX - dvipdfmx, and XeLaTeX. Unfortunately, support of PDF annotations by PDF viewers is sparse to nonexistent. The reference viewer for the development of this package is Adobe Reader.\n"
"\n"
-"date: 2009-09-21 19:37:51 +0000"
+"date: 2012-11-14 17:06:01 +0000"
msgstr ""
-#. summary(texlive-tools)
-msgid "The LaTeX standard tools bundle"
+#. summary(texlive-specs-q:texlive-pdfcomment-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfcomment"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfcomment-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfcomment"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfcprot)
+msgid "Activating and setting of character protruding using pdflatex"
msgstr ""
-#. description(texlive-lm)
+#. description(texlive-specs-q:texlive-pdfcprot)
msgid ""
-"The Latin Modern family of fonts consists of 72 text fonts and 20 mathematics fonts, and is based on the Computer Modern fonts released into public domain by AMS (copyright (c) 1997 AMS). The lm font set contains a lot of additional characters, mainly accented ones, but not exclusively. There is one set of fonts, available both in Adobe Type 1 format (*.pfb) and in OpenType format (*.otf). There are five sets of TeX Font Metric files, corresponding to: Cork encoding (cork-*.tfm); QX encoding (qx-\n"
-"*.tfm); TeX'n'ANSI aka LY1 encoding (texnansi-*.tfm); T5 (Vietnamese) encoding (t5-*.tfm); and Text Companion for EC fonts aka TS1 (ts1-*.tfm).\n"
+"This package provides an easy interface to adjust the character protrusion for different fonts and choosing the right adjustment automatically depending on the font. The package is largely superseded by microtype.\n"
"\n"
-"date: 2012-05-22 08:49:40 +0000"
+"date: 2012-06-15 18:54:24 +0000"
msgstr ""
-#. description(texlive-ptex2pdf)
+#. summary(texlive-specs-q:texlive-pdfcprot-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfcprot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfcprot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfcprot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfcrop)
+msgid "Crop PDF graphics"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-pdfcrop)
msgid ""
-"The Lua script provides system-independent support of Japanese typesetting engines in TeXworks. As TeXworks typesetting setup does not allow for multistep processing, this script runs one of the ptex-based programs (ptex, uptex, eptex, platex, uplatex) followed by dvipdfmx.\n"
+"A Perl script that can either trim pages of any whitespace border, or trim them of a fixed border.\n"
"\n"
-"date: 2013-05-07 18:01:57 +0000"
+"date: 2012-10-25 08:45:27 +0000"
msgstr ""
-#. summary(texlive-luatex)
-msgid "The LuaTeX engine"
-msgstr ""
+#. summary(texlive-specs-q:texlive-pdfcrop-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfcrop"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-mh)
-msgid "The MH bundle"
-msgstr ""
+#. description(texlive-specs-q:texlive-pdfcrop-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfcrop"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-mltex)
-msgid "The MLTeX system"
+#. summary(texlive-specs-q:texlive-pdfjam)
+msgid "Shell scripts interfacing to pdfpages"
msgstr ""
-#. description(texlive-mathdesign)
+#. description(texlive-specs-q:texlive-pdfjam)
msgid ""
-"The Math Design project offers free mathematical fonts, and \"faked\" Caps-and-Small-Caps fonts, that fit with existing text fonts. So far, four font families are available: - the mdput family, which corresponds to Adobe Utopia text fonts; - the mdugm family, which corresponds to URW Garamond text fonts; - the mdfga family, which corresponds to the (commercial) Fontsite Garamond text fonts; - the mdbch family, which corresponds to Bitstream Charter text fonts. Each maths font has a range of extra symbols, and blackboard bold and 'mathcal' alphabets.\n"
+"This is a collection of shell scripts which provide an interface to the pdfpages LaTeX package. They do such jobs as selecting pages, concatenating files, doing n-up formatting, and so on.\n"
"\n"
-"date: 2010-07-13 11:53:59 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mpcolornames)
-msgid ""
-"The MetaPost format plain.mp provides only five built-in colour names (variables), all of which are defined in the RGB model: red, green and blue for the primary colours and black and white. The package makes more than 500 colour names from different colour sets in different colour models available to MetaPost. Colour sets include X11, SVG, DVIPS and xcolor specifications.\n"
-"\n"
-"date: 2011-07-18 07:05:38 +0000"
+#. summary(texlive-specs-q:texlive-pdfjam-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfjam"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfjam-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfjam"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfmarginpar)
+msgid "Generate marginpar-equivalent PDF annotations"
msgstr ""
-#. description(texlive-latexmp)
+#. description(texlive-specs-q:texlive-pdfmarginpar)
msgid ""
-"The MetaPost package latexMP implements a user-friendly interface to access LaTeX-based typesetting capabilities in MetaPost. The text to be typeset is given as string. This allows even dynamic text elements, for example counters, to be used in labels. Compared to other implementations it is much more flexible, since it can be used as direct replacement for btex..etex, and much faster, compared for example to the solution provided by tex.mp\n"
+"The package provides the \\pdfmarginpar command which is similar in spirit to \\marginpar. However, it creates PDF annotations which may be viewed with Adobe Reader in place of marginal texts. Small icons indicate the in-text position where the message originates, popups provide the messages themselves. Thus bugfixes and other such communications are clearly visible together when viewing the document, while the document itself is not obscured.\n"
"\n"
-"date: 2007-02-22 23:16:39 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-munich)
-msgid ""
-"The Munich BibTeX style is produced with custom-bib, as a German (and, more generally, Continental European) alternative to such author-date styles as harvard and oxford.\n"
-"\n"
-"date: 2007-03-10 11:18:05 +0000"
+#. summary(texlive-specs-q:texlive-pdfmarginpar-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfmarginpar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfmarginpar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfmarginpar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfpages)
+msgid "Include PDF documents in LaTeX"
msgstr ""
-#. description(texlive-ncctools)
+#. description(texlive-specs-q:texlive-pdfpages)
msgid ""
-"The NCCtools bundle contains many packages for general use under LaTeX; many are also used by NCC LaTeX. The bundle includes tools for: - executing commands after a package is loaded; - watermarks; - counter manipulation (dynamic counters, changing counter numbering with another counter); - improvements to the description environment; - hyphenation of compound words; - new levels of footnotes; - space-filling patterns; - \"poor man's\" Black Board Bold symbols; - alignment of the content of a box; - use comma as decimal separator; - boxes with their own crop marks; - page cropmarks; - improvements to fancy headers; - float \"styles\", mini floats, side floats; - manually marked footnotes; - extension of amsmath; - control of paragraph skip; - an envelope to the graphicx package; - dashed and multiple rules; - alternative techniques for declarations of sections, captions, and toc- entries; - generalised text-stretching; - generation of new theorem-like environments; - control of the
text area; - centred page layouts; and - an un-numbered top-level section.\n"
+"This package simplifies the inclusion of external multi-page PDF documents in LaTeX documents. Pages may be freely selected and similar to psnup it is possible to put several logical pages onto each sheet of paper. Furthermore a lot of hypertext features like hyperlinks and article threads are provided. The package supports pdfTeX (pdflatex) and VTeX. With VTeX it is even possible to use this package to insert PostScript files, in addition to PDF files.\n"
"\n"
-"date: 2008-02-08 08:08:04 +0000"
+"date: 2013-08-25 15:45:16 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-NERDcommenter)
-msgid "The NERD commenter provides many different commenting operations and styles which may be invoked via key mappings and a commenting menu. These operations are available for most filetypes."
-msgstr ""
+#. summary(texlive-specs-q:texlive-pdfpages-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfpages"
+msgstr "Dokumentace pro adaptx"
-#. description(vim-plugins:vim-plugin-NERDtree)
-msgid "The NERD tree allows you to explore your filesystem and to open files and directories. It presents the filesystem to you in the form of a tree which you manipulate with the keyboard and/or mouse. It also allows you to perform simple filesystem operations."
-msgstr ""
+#. description(texlive-specs-q:texlive-pdfpages-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfpages"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. summary(texlive-opensans)
-msgid "The Open Sans font family, and LaTeX support"
+#. summary(texlive-specs-q:texlive-pdfscreen)
+msgid "Support screen-based document design"
msgstr ""
-#. description(texlive-issuulinks)
+#. description(texlive-specs-q:texlive-pdfscreen)
msgid ""
-"The PDF visualizer http://issuu.com/ISSUU is a popular service allowing to show PDF documents \"a page a time\". Due to the way it is implemented, internal links in these documents are not allowed. Instead, they must be converted to external ones in the form http://issuu.com/action/page?page=PAGENUMBER. The package patches hyperref to produce external links in the required form instead of internal links created by \\ref, \\cite and other commands. Since the package redefines the internals of hyperref, it must be loaded it AFTER hyperref.\n"
+"An extension of the hyperref package to provide a screen-based document design. This package helps to generate pdf documents that are readable on screen and will fit the screen's aspect ratio. Also it can be used with various options to produce regular print versions of the same document without any extra effort.\n"
"\n"
-"date: 2012-03-23 11:07:20 +0000"
+"date: 2012-07-18 18:44:29 +0000"
msgstr ""
-#. description(texlive-pdftricks)
-msgid ""
-"The PSTricks macros cannot be used (directly) with pdfTeX, since pstricks uses PostScript arithmetic, which isn't part of PDF. This package circumvents this limitation so that the extensive facilities offered by the powerful PSTricks package can be made use of in a pdfTeX document. This is done using the shell escape function available in current TeX implementations. The package may also be used in support of other 'PostScript- output-only' packages, such as PSfrag. For alternatives, users may care to review the discussion in the PSTricks online documentation.\n"
-"\n"
-"date: 2008-11-24 11:47:54 +0000"
+#. summary(texlive-specs-q:texlive-pdfscreen-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfscreen"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfscreen-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfscreen"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfslide)
+msgid "Presentation slides using pdftex"
msgstr ""
-#. description(texlive-mathpazo)
+#. description(texlive-specs-q:texlive-pdfslide)
msgid ""
-"The Pazo Math fonts are a family of PostScript fonts suitable for typesetting mathematics in combination with the Palatino family of text fonts. The Pazo Math family is made up of five fonts provided in Adobe Type 1 format (PazoMath, PazoMath- Italic, PazoMath-Bold, PazoMath-BoldItalic, and PazoMathBlackboardBold). These contain, in designs that match Palatino, glyphs that are usually not available in Palatino and for which Computer Modern looks odd when combined with Palatino. These glyphs include the uppercase Greek alphabet in upright and slanted shapes in regular and bold weights, the lowercase Greek alphabet in slanted shape in regular and bold weights, several mathematical glyphs (partialdiff, summation, product, coproduct, emptyset, infinity, and proportional) in regular and bold weights, other glyphs (Euro and dotlessj) in upright and slanted shapes in regular and bold weights, and the uppercase letters commonly used to represent various number sets (C, I, N, Q, R, and Z) i
n blackboard bold. The set also includes a set of 'true' small-caps fonts, also suitable for use with Palatino (or one of its clones). LaTeX macro support (using package mathpazo.sty) is provided in psnfss (a required part of any LaTeX distribution).\n"
+"This is a package for use with pdftex, to make nice presentation slides. Its aims are: to devise a method for easier technical presentation; to help the mix of mathematical formulae with text and graphics which other present day document processing tools fail to accomplish; to exploit the platform independence of TeX so that presentation documents become portable; and to offer the freedom and possibilities of using various backgrounds and other embellishments that a user can imagine to have in as presentation. The package can make use of the facilities of the PPower4 post-processor.\n"
"\n"
-"date: 2009-10-06 18:42:53 +0000"
+"date: 2012-07-18 18:44:29 +0000"
msgstr ""
-#. description(texlive-texdirflatten)
+#. summary(texlive-specs-q:texlive-pdfslide-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfslide"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfslide-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfslide"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfsync)
+msgid "Provide links between source and PDF"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-pdfsync)
msgid ""
-"The Perl script parses a LaTeX file recursively, scanning all child files, and collects details of any included and other data files. These component files, are then all put into a single directory (thus \"flattening\" the document's directory tree).\n"
+"The package runs with pdfTeX or XeTeX, and creates an auxiliary file with geometrical information to permit references back and forth between source and PDF, assuming a conforming editor and PDF viewer.\n"
"\n"
-"date: 2012-01-12 18:29:56 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-persian-modern)
+#. summary(texlive-specs-q:texlive-pdfsync-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfsync"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfsync-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfsync"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdftex)
+msgid "A TeX extension for direct creation of PDF"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-pdftex)
msgid ""
-"The Persian Modern family consists of 12 fonts (based on the \"FarsiTeX Scientific fonts\" released into the public domain by the FarsiTeX project). The single set of fonts is available in OpenType format (.otf).\n"
+"An extension of TeX which can be configured to directly generate PDF documents instead of DVI. All current free TeX distributionsm including TeX live, MacTeX and MiKTeX include pdfTeX (Plain TeX) and pdfLaTeX (LaTeX). ConTeXt was designed around use of pdfTeX (though it is now migrating towards LuaTeX).\n"
"\n"
-"date: 2013-04-20 19:59:01 +0000"
+"date: 2011-11-09 14:33:34 +0000"
msgstr ""
-#. description(texlive-pigpen)
+#. summary(texlive-specs-q:texlive-pdftex-def)
+#, fuzzy
+msgid "Colour and Graphics support for PDFTeX"
+msgstr "XML podpora pro castor"
+
+#. description(texlive-specs-q:texlive-pdftex-def)
msgid ""
-"The Pigpen cipher package provides the font and the necessary wrappers (style file, etc.) in order to write Pigpen ciphers, a simple substitution cipher. The package provides a font (available both as MetaFont source, and as an Adobe Type 1 file), and macros for its use.\n"
+"The file pdftex.def provides device-specific definitions for colour and graphics support when running pdf(La)TeX.\n"
"\n"
-"date: 2008-12-10 18:58:48 +0000"
+"date: 2013-09-21 23:11:41 +0000"
msgstr ""
-#. summary(tomcat:tomcat-webapps)
-msgid "The ROOT and examples web applications for Apache Tomcat"
+#. summary(texlive-specs-q:texlive-pdftex-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdftex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdftex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdftex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdftex-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-pdftex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdftex-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-pdftex"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-q:texlive-pdftools)
+msgid "PDF-related utilities, including PostScript-to-PDF conversion"
msgstr ""
-#. description(texlive-sasnrdisplay)
+#. description(texlive-specs-q:texlive-pdftools)
msgid ""
-"The SASnRdisplay package serves as a front-end to the listings, which permits statisticians and others to import source code, and the results of their calculations or simulations into LaTeX projects. The package is also capable of overloading the Sweave and SASweave packages.\n"
+"The command-line programs pdfopen and pdfclose allow you to control the X Window System version of Adobe's Acrobat Reader from the command line or from within a (shell) script. The programs work with Acrobat Reader 5, 7, 8 and 9 for Linux, xpdf and evince. This version derives from one written by Fabrice Popineau for Microsoft operating systems.\n"
"\n"
-"date: 2012-03-27 15:23:43 +0000"
+"date: 2014-05-24 16:22:24 +0000"
msgstr ""
-#. description(texlive-stix)
+#. summary(texlive-specs-q:texlive-pdftools-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdftools"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdftools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdftools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdftricks)
+msgid "Support for pstricks in pdfTeX"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-pdftricks)
msgid ""
-"The STIX fonts are a suite of unicode OpenType fonts containing a complete set of mathematical glyphs. The CTAN copy is a mirror of their official release, organised as specified by the TeX Directory Structure, for inclusion in standard TeX distributions.\n"
+"The PSTricks macros cannot be used (directly) with pdfTeX, since pstricks uses PostScript arithmetic, which isn't part of PDF. This package circumvents this limitation so that the extensive facilities offered by the powerful PSTricks package can be made use of in a pdfTeX document. This is done using the shell escape function available in current TeX implementations. The package may also be used in support of other 'PostScript- output-only' packages, such as PSfrag. For alternatives, users may care to review the discussion in the PSTricks online documentation.\n"
"\n"
-"date: 2011-12-20 11:56:09 +0000"
+"date: 2013-12-17 13:12:28 +0000"
msgstr ""
-#. description(xmlgraphics-batik:xmlgraphics-batik-ttf2svg)
-msgid "The SVG Font Converter lets developers convert character ranges from the True Type Font format to the SVG Font format to embed in SVG documents. This allows SVG document to be fully self-contained be rendered exactly the same on all systems."
-msgstr ""
+#. summary(texlive-specs-q:texlive-pdftricks-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdftricks"
+msgstr "Dokumentace pro adaptx"
-#. description(xmlgraphics-batik:xmlgraphics-batik-svgpp)
-msgid "The SVG Pretty Printer lets developers \"pretty-up\" their SVG files and get their tabulations and other cosmetic parameters in order. It can also be used to modify the DOCTYPE declaration on SVG files."
+#. description(texlive-specs-q:texlive-pdftricks-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdftricks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdftricks2)
+msgid "Use pstricks in pdfTeX"
msgstr ""
-#. description(xmlgraphics-batik:xmlgraphics-batik-rasterizer)
-msgid "The SVG Rasterizer is a utility that can convert SVG files to a raster format. The tool can convert individual files or sets of files, making it easy to convert entire directories of SVG files. The supported formats are JPEG, PNG, and TIFF, however the design allows new formats to be added easily."
+#. description(texlive-specs-q:texlive-pdftricks2)
+msgid ""
+"The package provides the means of processing documents (that contain pstricks graphics specifications. The package is inspired by pdftricks\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xmlgraphics-batik:xmlgraphics-batik-squiggle)
-msgid "The Squiggle SVG Browser lets you view SVG file, zoom, pan and rotate in the content and select text items in the image and much more."
+#. summary(texlive-specs-q:texlive-pdftricks2-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdftricks2"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdftricks2-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdftricks2"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfwin)
+msgid "Package pdfwin"
+msgstr "Balíček pdfwin"
+
+#. description(texlive-specs-q:texlive-pdfwin)
+msgid "The pdfwin package"
msgstr ""
-#. summary(texlive-starfont)
-msgid "The StarFont Sans astrological font"
+#. summary(texlive-specs-q:texlive-pdfwin-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfwin"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfwin-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfwin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pdfx)
+msgid "PDF/X-1a and PDF/A-1b support for pdfTeX"
msgstr ""
-#. description(texlive-t2)
+#. description(texlive-specs-q:texlive-pdfx)
msgid ""
-"The T2 bundle provides a variety of separate support functions, for using Cyrillic characters in LaTeX: - the mathtext package, for using Cyrillic letters 'transparently' in formulae - the citehack package, for using Cyrillic (or indeed any non-ascii) characters in citation keys; - support for Cyrillic in BibTeX;\n"
-"- support for Cyrillic in Makeindex; and - various items of font support.\n"
+"The package helps LaTeX users to create PDF/X-1a and PFD/A-1b compliant pdf documents with pdfTeX.\n"
"\n"
-"date: 2012-06-05 12:57:36 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. summary(texlive-tds)
-msgid "The TeX Directory Structure standard"
+#. summary(texlive-specs-q:texlive-pdfx-doc)
+#, fuzzy
+msgid "Documentation for texlive-pdfx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pdfx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pdfx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pecha)
+msgid "Print Tibetan text in the classic pecha layout style"
msgstr ""
-#. description(texlive-tex-gyre)
+#. description(texlive-specs-q:texlive-pecha)
msgid ""
-"The TeX-GYRE bundle consists of six font families: TeX Gyre Adventor is based on the URW Gothic L family of fonts (which is derived from ITC Avant Garde Gothic, designed by Herb Lubalin and Tom Carnase). TeX Gyre Bonum is based on the URW Bookman L family (from Bookman Old Style, designed by Alexander Phemister). TeX Gyre Chorus is based on URW Chancery L Medium Italic (from ITC Zapf Chancery, designed by Hermann Zapf in 1979). TeX-Gyre Cursor is based on URW Nimbus Mono L (based on Courier, designed by Howard G. Kettler in 1955, for IBM). TeX Gyre Heros is based on URW Nimbus Sans L (from Helvetica, prepared by Max Miedinger, with Eduard Hoffmann in 1957). TeX Gyre Pagella is based on URW Palladio L (from Palation, designed by Hermann Zapf in the 1940s). TeX Gyre Schola is based on the URW Century Schoolbook L family (which was designed by Morris Fuller Benton for the American Type Founders). TeX Gyre Termes is based on the URW Nimbus Roman No9 L family of fonts (whose original, T
imes, was designed by Stanley Morison together with Starling Burgess and Victor Lardent and first offered by Monotype). The constituent standard faces of each family have been greatly extended, and contain nearly 1200 glyphs each (though Chorus omits Greek support, has no small-caps family and has approximately 900 glyphs). Each family is available in Adobe Type 1 and Open Type formats, and LaTeX support (for use with a variety of encodings) is provided. Vietnamese and Cyrillic characters were added by Han The Thanh and Valek Filippov, respectively.\n"
+"The pecha class provides an environment for writing Tibetan on LaTeX2e in the traditional Tibetan Pecha layout used for spiritual or philosophical texts, using the cTib4TeX package by Oliver Corff. It provides features like headers in different languages, page numbering in Tibetan and more.\n"
"\n"
-"date: 2009-11-12 12:33:47 +0000"
+"date: 2012-07-18 18:44:29 +0000"
msgstr ""
-#. description(tibetan-machine-uni-fonts)
-msgid "The Tibetan & Himalayan Library is pleased to make available the alpha release of the Unicode character based Tibetan Machine Uni OpenType font for writing Tibetan, Dzongkha and Ladakhi in dbu can script with full support for the Sanskrit combinations found in chos skad texts."
+#. summary(texlive-specs-q:texlive-pecha-doc)
+#, fuzzy
+msgid "Documentation for texlive-pecha"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pecha-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pecha"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pedigree-perl)
+msgid "Generate TeX pedigree files from CSV files"
msgstr ""
-#. description(transifex-client)
+#. description(texlive-specs-q:texlive-pedigree-perl)
msgid ""
-"The Transifex Command-line Client is a command line tool that enables you to easily manage your translations within a project without the need of an elaborate UI system.\n"
+"This program generates TeX commands to typeset pedigrees -- either TeX fragments or full LaTeX files, to be processed by the authors' pst-pdgr package. The program has support for multilanguage pedigrees (at the present moment the English and Russian languages are supported).\n"
"\n"
-"You can use the command-line client to easily create new resources, map locale files to translations and synchronize your Transifex project with your local repository and vice verca. Translators and localization managers can also use it to handle large volumes of translation files easily and without much hassle."
+"date: 2012-05-31 16:08:53 +0000"
msgstr ""
-#. description(translate-toolkit)
-msgid ""
-"The Translate Toolkit is a set of software and documentation designed to help make the lives of localizers both more productive and less frustrating.\n"
-"\n"
-"The software includes programs to convert localization formats to the common PO, and emerging XLIFF format. There are also programs to check and manage PO and XLIFF files. Online documentation includes guides on using the tools, running a localization project and how to localize various projects from OpenOffice.org to Mozilla.\n"
-"\n"
-"At its core the software contains a set of classes for handling various localization storage formats: DTD, properties, OpenOffice.org GSI/SDF, CSV, MO, Qt .ts, TMX, TBX, WordFast txt, Gettext .mo, Windows RC, and of course PO and XLIFF. It also provides scripts to convert between these formats.\n"
-"\n"
-"Also part of the Toolkit are Python programs to create word counts, merge translations and perform various checks on translation files."
+#. summary(texlive-specs-q:texlive-pedigree-perl-doc)
+#, fuzzy
+msgid "Documentation for texlive-pedigree-perl"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pedigree-perl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pedigree-perl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-perception)
+msgid "BibTeX style for the journal Perception"
msgstr ""
-#. description(texlive-umtypewriter)
+#. description(texlive-specs-q:texlive-perception)
msgid ""
-"The UMTypewriter font family is a monospaced font family that was built from glyphs from the CB Greek fonts, the CyrTUG Cyrillic alphabet fonts (\"LH\"), and the standard Computer Modern font family. It contains four OpenType fonts which are required for use of the xgreek package for XeLaTeX.\n"
+"A product of custom-bib, provided simply to save others' time.\n"
"\n"
-"date: 2009-07-23 13:45:58 +0000"
+"date: 2012-05-31 16:08:53 +0000"
msgstr ""
-#. description(ubuntu-fonts)
+#. summary(texlive-specs-q:texlive-perception-doc)
+#, fuzzy
+msgid "Documentation for texlive-perception"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-perception-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-perception"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-perfectcut)
+msgid "Brackets whose size adjusts to the nesting"
+msgstr ""
+
+#. description(texlive-specs-q:texlive-perfectcut)
msgid ""
-"The Ubuntu Font Family are a set of matching new libre/open fonts. The development is being funded by Canonical on behalf the wider Free Software community and the Ubuntu project. The technical font design work and implementation is being undertaken by Dalton Maag.\n"
+"The package defines the command \\perfectcut#1#2 which displays a bracket <#1||#2>. Its effect is to determine the size of the bracket depending on the number of nested \\perfectcut (regardless of the contents). The command is intended for use: In proof theory, for term notations of sequent calculus, In computer science, for the modeling of abstract machines. The package also offers a reimplementation of \\big, \\bigg, etc., into arbitrary-size variants.\n"
"\n"
-"Both the final font Truetype/OpenType files and the design files used to produce the font family are distributed under an open licence and you are expressly encouraged to experiment, modify, share and improve. The typeface is sans-serif, uses OpenType features and is manually hinted for clarity on desktop and mobile computing screens.\n"
-"\n"
-"The scope of the Ubuntu Font Family includes all the languages used by the various Ubuntu users around the world in tune with Ubuntu's philosophy which states that every user should be able to use their software in the language of their choice. So the Ubuntu Font Family project will be extended to cover many more written languages."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(ufw)
-msgid "The Uncomplicated Firewall(ufw) is a front-end for netfilter, which aims to make it easier for people unfamiliar with firewall concepts. Ufw provides a framework for managing netfilter as well as manipulating the firewall."
-msgstr ""
+#. summary(texlive-specs-q:texlive-perfectcut-doc)
+#, fuzzy
+msgid "Documentation for texlive-perfectcut"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-latex-veryshortguide)
-msgid "The Very Short Guide to LaTeX"
-msgstr ""
+#. description(texlive-specs-q:texlive-perfectcut-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-perfectcut"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(vusb-analyzer)
-msgid "The Virtual USB Analyzer is a free and open source tool for visualizing logs of USB packets, from hardware or software USB sniffer tools. The Virtual USB Analyzer is not itself a USB sniffer tool. It is just a user interface for visualizing logs."
+#. summary(texlive-specs-q:texlive-perltex)
+msgid "Define LaTeX macros in terms of Perl code"
msgstr ""
-#. description(vtkdata)
+#. description(texlive-specs-q:texlive-perltex)
msgid ""
-"The Visualization ToolKit (VTK) is an open source, freely available software system for 3D computer graphics, image processing, and visualization used by thousands of researchers and developers around the world.\n"
+"PerlTeX is a combination Perl script (perltex.pl) and LaTeX2e package (perltex.sty) that, together, give the user the ability to define LaTeX macros in terms of Perl code. Once defined, a Perl macro becomes indistinguishable from any other LaTeX macro. PerlTeX thereby combines LaTeX's typesetting power with Perl's programmability. PerlTeX will make use of persistent named pipes, and thereby run more efficiently, on operating systems that offer them (mostly Unix-like systems). Also provided is a switch to generate a PerlTeX-free, document- specific, noperltex.sty that is useful when distributing a document to places where PerlTeX is not available.\n"
"\n"
-"This package contains some example data for the Toolkit."
+"date: 2012-06-12 16:08:23 +0000"
msgstr ""
-#. description(w3c-markup-validator)
-msgid "The W3C Markup Validator checks documents like HTML and XHTML for conformance to W3C Recommendations and other standards."
+#. summary(texlive-specs-q:texlive-perltex-doc)
+#, fuzzy
+msgid "Documentation for texlive-perltex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-perltex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-perltex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-permute)
+msgid "Support for symmetric groups"
msgstr ""
-#. description(texlive-wasysym)
+#. description(texlive-specs-q:texlive-permute)
msgid ""
-"The WASY2 (Waldi Symbol) font by Roland Waldi provides many glyphs like male and female symbols and astronomical symbols, as well as the complete lasy font set and other odds and ends. The wasysym package implements an easy to use interface for these symbols.\n"
+"A package for symmetric groups, allowing you to input, output, and calculate with them.\n"
"\n"
-"date: 2006-12-16 21:36:42 +0000"
+"date: 2012-06-12 20:35:22 +0000"
msgstr ""
-#. description(wsdl4j:wsdl4j-javadoc)
+#. summary(texlive-specs-q:texlive-permute-doc)
+#, fuzzy
+msgid "Documentation for texlive-permute"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-q:texlive-permute-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-permute"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-persian-bib)
+#, fuzzy
+msgid "Persian translations of classic BibTeX styles"
+msgstr "Tamilské překlady pro KOffice"
+
+#. description(texlive-specs-q:texlive-persian-bib)
msgid ""
-"The Web Services Description Language for Java Toolkit (WSDL4J) allows the creation, representation, and manipulation of WSDL documents describing services. This codebase will eventually serve as a reference implementation of the standard created by JSR110.\n"
+"Currently 7 files: acm-fa.bst, asa-fa.bst, chicago-fa.bst, ieeetr-fa.bst, plain-fa.bst, plainnat-fa.bst and unsrt-fa.bst are modified for Persian documents prepared with XePersian (which the present package depends on). The Persian .bst files can simultaneously handle both Latin and Persian references. A file cp1256fa.csf is provided for correct sorting of Persian references and three fields LANGUAGE, TRANSLATOR and AUTHORFA are defined.\n"
"\n"
-"This package contains the javadoc documentation for the Web Services Description Language for Java."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-"WSDL4J (The Web Services Description Language for Java Toolkit) umožňuje vytváření, reprezentaci a manipulaci s službami popisujícími WSDL dokumenty. Tento kód může sloužit jako referenční implementace standardu vytvořeného JSR110.\n"
-"\n"
-"tento balíček obsahuje javadoc dokumentaci pro WSDL4J."
-#. description(wqy-bitmap-fonts)
-msgid "The Wen Quan Yi bitmap font includes complete CJK Unified Ideograph (U4E00 - U9FA5) glyphs at four different sizes (9pt-12X12 pixel, 10pt-13X13 pixel, 11pt-15X15 pixel, 12pt-16x16 pixel) and two weights (medium and bold)."
+#. summary(texlive-specs-q:texlive-persian-bib-doc)
+#, fuzzy
+msgid "Documentation for texlive-persian-bib"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-persian-bib-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-persian-bib"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-persian-modern)
+msgid "The \"Persian Modern\" family of fonts"
msgstr ""
-#. description(wm-icons)
-msgid "The Window Manager Icons is an efficient icon distribution designed to be standardized and configurable. Includes several themed icon sets, scripts, and configurations for several window managers."
-msgstr "Tento balík obsahuje několik sad ikon, skriptů a konfiguračních nástrojů pro různé správce ikon."
+#. description(texlive-specs-q:texlive-persian-modern)
+msgid ""
+"The Persian Modern family consists of 12 fonts (based on the \"FarsiTeX Scientific fonts\" released into the public domain by the FarsiTeX project). The single set of fonts is available in TrueType format (.ttf).\n"
+"\n"
+"date: 2014-04-29 04:13:54 +0000"
+msgstr ""
-#. summary(WALinuxAgent)
-msgid "The Windows Azure Linux Agent"
+#. summary(texlive-specs-q:texlive-persian-modern-doc)
+#, fuzzy
+msgid "Documentation for texlive-persian-modern"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-persian-modern-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-persian-modern"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-persian-modern-fonts)
+msgid "Severed fonts for texlive-persian-modern"
msgstr ""
-#. description(WALinuxAgent)
-msgid "The Windows Azure Linux Agent supports the provisioning and running of Linux VMs in the Windows Azure cloud. This package should be installed on Linux disk images that are built to run in the Windows Azure environment."
+#. description(texlive-specs-q:texlive-persian-modern-fonts)
+msgid "The separated fonts package for texlive-persian-modern"
msgstr ""
-#. description(xcb-util-cursor:xcb-util-cursor-devel-32bit)
-msgid ""
-"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
-"\n"
-"This package contains the development headers for the library found in libxcb-cursor0."
+#. summary(texlive-specs-q:texlive-petiteannonce)
+msgid "A class for small advertisements"
msgstr ""
-#. description(xcb-util-wm:xcb-util-wm-devel-32bit)
+#. description(texlive-specs-q:texlive-petiteannonce)
msgid ""
-"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
+"The class enables you to create the sort of adverts that you pin on a noticeboard, with tear-off strips at the bottom where you can place contact details.\n"
"\n"
-"This package contains the development headers for the library found in libxcb-ewmh2, libxcb-icccm4."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xcb-util-image:xcb-util-image-devel-32bit)
-msgid ""
-"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
-"\n"
-"This package contains the development headers for the library found in libxcb-image0."
+#. summary(texlive-specs-q:texlive-petiteannonce-doc)
+#, fuzzy
+msgid "Documentation for texlive-petiteannonce"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-petiteannonce-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-petiteannonce"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-petri-nets)
+msgid "A set TeX/LaTeX packages for drawing Petri nets"
msgstr ""
-#. description(xcb-util-keysyms:xcb-util-keysyms-devel-32bit)
+#. description(texlive-specs-q:texlive-petri-nets)
msgid ""
-"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
+"Petri-nets is a set of TeX/LaTeX packages about Petri nets and related models. Three packages are available: the first allows the user to draw Petri-nets in PostScript documents; the second defines macros related to PBC, M-nets and B(PN) models; and a third that combines the other two.\n"
"\n"
-"This package contains the development headers for the library found in libxcb-keysyms1."
+"date: 2013-12-06 00:11:02 +0000"
msgstr ""
-#. description(xcb-util-renderutil:xcb-util-renderutil-devel-32bit)
-msgid ""
-"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
-"\n"
-"This package contains the development headers for the library found in libxcb-render-util0."
+#. summary(texlive-specs-q:texlive-petri-nets-doc)
+#, fuzzy
+msgid "Documentation for texlive-petri-nets"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-petri-nets-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-petri-nets"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pfarrei)
+msgid "LaTeX support of pastors' and priests' work"
msgstr ""
-#. description(texlive-xmpincl)
+#. description(texlive-specs-q:texlive-pfarrei)
msgid ""
-"The XMP (eXtensible Metadata platform) is a framework to add metadata to digital material to enhance the workflow in publication. The essence is that the metadata is stored in an XML file, and this XML stream is then embedded in the file to which it applies. How you create this XML file is up to you, but the author started investigating this because he wanted to embed licensing information in the files he created. The license the author chose is one of the Creative Commons licenses, and their web-site offers this information in a valid XML-file, suitable for direct inclusion.\n"
+"In \"Die TeXnische Komodie\" (issue 1/2013) Christian Justen described his use of LaTeX in his work as priest (similar requirements may be encountered in the work of pastors and other ministers of religion). One point was to arrange A5 pages onto A4 landscape paper, either side-by-side or as a booklet. Justen made two bash scripts for this job; the package provides one texlua script for both requirements. (Note that file a5toa4.tlu should have execute permissions in any installation.)\n"
"\n"
-"date: 2008-05-10 18:43:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xalan-j2:xalan-j2-xsltc)
-msgid "The XSLT Compiler is a Java-based tool for compiling XSLT stylesheets into lightweight and portable Java byte codes called translets."
-msgstr "XSLT Compiler je na Jave založený nástroj pro kompilaci XSLT stylů do java transletů."
+#. summary(texlive-specs-q:texlive-pfarrei-doc)
+msgid "Documentation for texlive-pfarrei"
+msgstr ""
-#. description(texlive-ly1)
+#. description(texlive-specs-q:texlive-pfarrei-doc)
+msgid "This package includes the documentation for texlive-pfarrei"
+msgstr ""
+
+#. summary(texlive-specs-q:texlive-pgf)
+#, fuzzy
+#| msgid "PostScript and PDF Converter"
+msgid "Create PostScript and PDF graphics in TeX"
+msgstr "Konvertor PostScriptu a PDF"
+
+#. description(texlive-specs-q:texlive-pgf)
msgid ""
-"The Y&Y 'texnansi' (TeX and ANSI, for Microsoft interpretations of ANSI standards) encoding lives on, even after the decease of the company; it is known in the LaTeX scheme of things as LY1 encoding. This bundle includes metrics and LaTeX macros to use the basic three (Times, Helvetica and Courier) Adobe Type 1 fonts in LaTeX using LY1 encoding.\n"
+"PGF is a macro package for creating graphics. It is platform- and format-independent and works together with the most important TeX backend drivers, including pdftex and dvips. It comes with a user-friendly syntax layer called TikZ. Its usage is similar to pstricks and the standard picture environment. PGF works with plain (pdf-)TeX, (pdf-)LaTeX, and ConTeXt. Unlike pstricks, it can produce either PostScript or PDF output.\n"
"\n"
-"date: 2010-06-15 08:37:47 +0000"
+"date: 2014-02-26 20:08:13 +0000"
msgstr ""
-#. description(yast2-inetd:yast2-inetd-doc)
-msgid "The YaST2 component for configuring the inetd and xinetd daemons (documentation)."
+#. summary(texlive-specs-q:texlive-pgf-blur)
+msgid "PGF/TikZ package for \"blurred\" shadows"
msgstr ""
-#. description(zeroinstall-injector)
+#. description(texlive-specs-q:texlive-pgf-blur)
msgid ""
-"The Zero Install Injector makes it easy for users to install software without needing root privileges. It takes the URL of a program and runs it (downloading it first if necessary). Any dependencies of the program are fetched in the same way. The user controls which version of the program and its dependencies to use.\n"
+"The package adds blurred/faded/fuzzy shadows to PGF/TikZ pictures. It is configured as a TikZ/PGF library module. The method is similar to that of the author's pst-blur package for PSTricks.\n"
"\n"
-"Zero Install is a decentralised installation system (there is no central repository; all packages are identified by URLs), loosly-coupled (if different programs require different versions of a library then both versions are installed in parallel, without conflicts), and has an emphasis on security (all package descriptions are GPG-signed, and contain cryptographic hashes of the contents of each version). Each version of each program is stored in its own sub-directory within the Zero Install cache (nothing is installed to directories outside of the cache, such as /usr/bin) and no code from the package is run during install or uninstall. The system can automatically check for updates when software is run."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-maybemath)
-msgid ""
-"The \\maybebm and \\maybeit macros can be used in math expressions to make the arguments typeset as bold or italic respectively if the surrounding context is appropriate. They are useful for writing user macros for use in general contexts. \\maybebm is especially appropriate when section titles contain math expressions, since the title will appear bold but the header and table of contents usually replicate the title in normal width. It uses the bm package to make things bold \\maybeit performs a similar role to \\mathrm{} but the math expression will be italicised if the surrounding text is. \\maybeitsubscript is provided to shift subscripts to the left if the expression is italicised.\n"
-"\n"
-"date: 2007-03-09 21:25:45 +0000"
+#. summary(texlive-specs-q:texlive-pgf-blur-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgf-blur"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgf-blur-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgf-blur"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgf-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgf"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgf-soroban)
+msgid "Create images of the soroban using TikZ/PGF"
msgstr ""
-#. description(texlive-stubs)
+#. description(texlive-specs-q:texlive-pgf-soroban)
msgid ""
-"The \\stubs command creates as many repetitions as possible of its argument, at the bottom of the page; these stubs may be used (for example) for contact information.\n"
+"The package makes it possible to create pictures of the soroban (Japanese abacus) using PGF/TikZ\n"
"\n"
-"date: 2008-08-23 20:26:13 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xytree)
+#. summary(texlive-specs-q:texlive-pgf-soroban-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgf-soroban"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-q:texlive-pgf-soroban-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgf-soroban"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgf-umlcd)
+#, fuzzy
+msgid "Some LaTeX macros for UML Class Diagrams"
+msgstr "TeXová makra pro šachové diagramy"
+
+#. description(texlive-specs-q:texlive-pgf-umlcd)
msgid ""
-"The aim of xytree is to draw linguistic syntactic trees with ease and to support hopefully sufficient functionalities, that the linguist may need. The package (of course) depends on the XY-Pic package.\n"
+"Some LaTeX macros for UML Class Diagrams.pgf\n"
"\n"
-"date: 2007-03-13 08:23:19 +0000"
+"date: 2014-03-28 17:05:25 +0000"
msgstr ""
-#. description(texlive-ltxfileinfo)
-msgid ""
-"The bash script ltxfileinfo prints information about a LaTeX class, style and other files to standard output. The script is based on Uwe Luck's readprov, so it prints information only for files that contain a \\ProvidesFile, \\ProvidesClass or \\ProvidesPackage statement. The script tries to correct errors in these \\Provides... statements and it has options, useful for developers, to make errors in those statements visible.\n"
-"\n"
-"date: 2013-02-05 05:50:41 +0000"
+#. summary(texlive-specs-q:texlive-pgf-umlcd-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgf-umlcd"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgf-umlcd-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgf-umlcd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgf-umlsd)
+msgid "Draw UML Sequence Diagrams"
msgstr ""
-#. description(texlive-relsize)
+#. description(texlive-specs-q:texlive-pgf-umlsd)
msgid ""
-"The basic command of the package is \\relsize, whose argument is a number of \\magsteps to change size; from this are defined commands \\larger, \\smaller, \\textlarger, etc.\n"
+"LaTeX macros to draw UML diagrams using pgf\n"
"\n"
-"date: 2013-05-27 18:07:27 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-upmethodology)
-msgid ""
-"The bundle allows the user to create Unified Process methodology (UP or RUP) based documents. The style provides document versioning, document history, document authors, document validators, specification description, task management, and several helping macros.\n"
-"\n"
-"date: 2013-05-19 12:28:08 +0000"
+#. summary(texlive-specs-q:texlive-pgf-umlsd-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgf-umlsd"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgf-umlsd-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgf-umlsd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgfgantt)
+msgid "Draw Gantt charts with TikZ"
msgstr ""
-#. description(texlive-shipunov)
+#. description(texlive-specs-q:texlive-pgfgantt)
msgid ""
-"The bundle collects packages and classes, along with one bibliography style and examples and scripts for converting TeX files. Many of the files in the collection are designed to support field biologists and/or Russian writers, while others have wider application. The collection includes (among others):\n"
-"- altverse, a simple verse typesetting package; - autolist, which provides various list formatting facilities; - biokey, which provides a mechanism for typesetting biological identification lists; - biolist, which typesets species lists;\n"
-"- boldline, which typesets heavier separating lines in tables;\n"
-"- cassete, which lays out audio cassette inserts; - classif2, which typesets classification lists; - drcaps, which provides dropped capital macros; - etiketka, a class for typesetting business-card-sized information (including business cards); - flower, for typesetting lists of flower formulae; - isyntax; - numerus; - punct; - sltables, which develops on the stables package, for use in a LaTeX context; and - starfn.\n"
+"The package provides an environment for drawing Gantt charts that contain various elements (titles, bars, milestones, groups and links). Several keys customize the appearance of the chart elements.\n"
"\n"
-"date: 2012-06-07 22:21:14 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-oberdiek)
-msgid ""
-"The bundle comprises packages to provide: - accsupp: better accessibility support for PDF files; - aliascnt: 'alias counters'; - alphalph: multiple-alphabetic counting (a...z,aa...zz,... -- up to the full extent of a TeX counter);\n"
-"- askinclude: replaces \\includeonly by an interactive user interface; - atbegshi: a modern reimplementation of package everyshi; - atenddvi: provides \\AtEndDvi command; - attachfile2: attach files to PDF files; - atveryend: hooks the very end of a document; - auxhook: stick stuff at the start of the .aux file; - bigintcalc: expandable arithmetic operations with big integers that can exceed TeX's number limits; - bitset: defines and implements the data type bit set, a vector of bits; - bmpsize: get bitmap size and resolution data; - bookmark: alternative bookmark (outline) organization for package hyperref; - catchfile: collects the contents of a file and puts it in a macro; - centernot: a horizontally-centred \\not symbol; - chemarr: extensible chemists' reaction arrows; - classlist: record information about document class(es) used; - colonequals: poor man's mathematical relation symbols; - dvipscol: dvips colour stack management; - embedfile: embed files in PDF documents; - engo
rd: define counter-printing operations producing English ordinals; - eolgrab: collect arguments delimited by end of line; - epstopdf: conversion with epstopdf on the fly; - etexcmds: adds a prefix to eTeX's commands, to avoid conflicts with existing macros; - flags: setting and clearing flags in bit fields and converting the bit field into a decimal number; - gettitlestring: clean up the string containing the title of a section, etc.; - grfext: macros for adding and reordering the list of graphics file extensions recognised by the graphics package; - grffile: extend file name processing in the graphics bundle; - hosub: build collections of packages; - holtxdoc: extra documentation macros; - hologo: bookmark-enabled logos; - hopatch: safely apply package patches; - hycolor: implements the color option stuff that is used by packages hyperref and bookmark; - hypbmsec: bookmarks in sectioning commands; - hypcap: anjusting anchors of captions; - hypdestopt: optimising hyperref's pdftex d
river destinations; - hypdoc: hyper-references in the LaTeX standard doc package; - hypgotoe: experimental package for links to embedded files; - hyphsubst: substitute hyphenation patterns; - ifdraft: switch for option draft; - iflang: provides expandable checks for the current language; - ifluatex: looks for LuaTeX regardless of its mode and provides the switch \\ifluatex; - ifpdf: provides the ifpdf switch; - ifvtex: provides the \\ifvtex switch; - infwarerr: provides a complete set of macros for informations, warnings and error messages with support for plain TeX; - inputenx: enhanced handling of input encoding; - intcalc: provides expandable arithmetic operations with integers; - kvdefinekeys: define key-value keys in the same manner as keyval; - kvoptions: use package options in key value format ; - kvsetkeys: a variant of the \\setkeys command; - letltxmacro: Let assignment for LaTeX macros; - listingsutf8: (partially) extends the listings package to UTF-8 encoding; - ltxcmds:
exports some utility macros from the LaTeX kernel into a separate namespace and also provides them for other formats such as plain-TeX; - luacolor: implements colour support based on LuaTeX's node attributes; - luatex: utilises new and extended features and resources that LuaTeX provides; - magicnum: allows to access magic numbers by a hierarchical name system; - makerobust: make a command robust; - pagegrid: prints a page grid in the background; - pagesel: select pages of a document for output; - pdfcolfoot: using pdftex's color stack for footnotes; - pdfcol: macros for setting and maintaining new color stacks; - pdfcolmk: PDFTeX COLour MarK -- fake a PDFTeX colour stack using marks (not needed for PDFTeX 1.40.0 and later); - pdfcolparallel: fixes colour problems in package parallel; - pdfcolparcolumns: fixes colour problems in package parcolumns; - pdfcrypt: setting PDF encryption; - pdfescape: pdfTeX's escape features using TeX or e-TeX; - pdflscape: landscape pages in PDF; - pd
frender: control PDF rendering modes; - pdftexcmds: provide PDFTeX primitives missing in LuaTeX; - picture: dimens for picture macros; - pmboxdraw: poor man's box drawing characters; - protecteddef: define a command that protected against expansion; - refcount: using the numeric values of references;\n"
-"- rerunfilecheck: checksum based rerun checks on auxiliary files; - resizegather: automatically resize overly large equations; - rotchiffre: performs simple rotation cyphers; - scrindex: redefines environment 'theindex' of package 'index', if a class from KOMA-Script is loaded; - selinput: select the input encoding by specifying pairs of input characters and their glyph names; - setouterhbox: set \\hbox in outer horizontal mode; - settobox: getting box sizes; - soulutf8: extends package soul and adds some support for UTF-8; - stackrel: extensions of the \\stackrel command; - stampinclude: selects the files for \\include by inspecting the timestamp of the .aux file(s); - stringenc: provides \\StringEncodingConvert for converting a string between different encodings; - tabularht: tabulars with height specification; - tabularkv: key value interface for tabular parameters; - telprint: print German telephone numbers; - thepdfnumber: canonical numbers for use in PDF files and elsewhere;
- transparent: using a color stack for transparency with pdftex; - twoopt: commands with two optional arguments; - uniquecounter: provides unlimited unique counter; - zref: a proposed new reference system. Each of the packages is represented by two files, a .dtx (documented source) and a PDF file; the .ins file necessary for installation is extracted by running the .dtx file with Plain TeX.\n"
-"\n"
-"date: 2012-05-04 14:11:29 +0000"
+#. summary(texlive-specs-q:texlive-pgfgantt-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgfgantt"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgfgantt-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgfgantt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgfkeyx)
+msgid "Extended and more robust version of pgfkeys"
msgstr ""
-#. description(texlive-preprint)
+#. description(texlive-specs-q:texlive-pgfkeyx)
msgid ""
-"The bundle comprises: - authblk, which permits footnote style author/affiliation input in the \\author command, - balance, to balance the end of \\twocolumn pages, - figcaps, to send figure captions, etc., to end document, - fullpage, to set narrow page margins and set a fixed page style, and - sublabel, which permits counters to be subnumbered.\n"
+"The package extends and improves the robustness of the pgfkeys package. In particular, it can deal with active comma, equality sign, and slash in key parsing. The difficulty with active characters has long been a problem with the pgfkeys package. The package also introduces handlers beyond those that pgfkeys can offer.\n"
"\n"
-"date: 2013-05-13 09:38:32 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-sauerj)
-msgid ""
-"The bundle consists of: a tool for collecting text for later re-use, a tool for typesetting the \"meta-information\" within a text, a tool for use in constructing macros with multiple optional parameters, a package for multiple column parallel texts, a tool for processing key-value structured lists, and macros for typesetting a number as a German-language string.\n"
-"\n"
-"date: 2007-01-15 19:25:47 +0000"
+#. summary(texlive-specs-q:texlive-pgfkeyx-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgfkeyx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgfkeyx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgfkeyx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgfmolbio)
+msgid "Draw graphs typically found in molecular biology texts"
msgstr ""
-#. description(texlive-swebib)
+#. description(texlive-specs-q:texlive-pgfmolbio)
msgid ""
-"The bundle contains Swedish versions of the standard bibliography styles, and of the style plainnat. The styles should be funtionally equivalent to the corresponding original styles, apart from the Swedish translations. The styles do not implement Swedish collation.\n"
+"The package draws graphs typically found in molecular biology texts. Currently, the package contains modules for drawing DNA sequencing chromatograms and protein domain diagrams.\n"
"\n"
-"date: 2007-01-15 13:17:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lstaddons)
-msgid ""
-"The bundle contains a small collection of add-on packages for the listings package. Current packages are: [?] lstlinebgrd: colour the background of some or all lines of a listing; and [?] lstautogobble: set the standard \"gobble\" option to the indent of the first line of the code.\n"
-"\n"
-"date: 2012-05-03 15:01:13 +0000"
+#. summary(texlive-specs-q:texlive-pgfmolbio-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgfmolbio"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgfmolbio-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgfmolbio"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgfopts)
+msgid "LaTeX package options with pgfkeys"
msgstr ""
-#. description(texlive-math-e)
+#. description(texlive-specs-q:texlive-pgfopts)
msgid ""
-"The bundle contains all the examples from the (English) book \"Typesetting Mathematics with LaTeX\" (UIT Press, Cambridge, 2010). The examples are stand alone documents and may be separately processed with LaTeX or PDFLaTeX.\n"
+"The pgfkeys package (part of the pgf distribution) is a well- designed way of defining and using large numbers of keys for key-value syntaxes. However, pgfkeys itself does not offer means of handling LaTeX class and package options. This package adds such option handling to pgfkeys, in the same way that kvoptions adds the same facility to the LaTeX standard keyval package.\n"
"\n"
-"date: 2010-10-11 19:01:03 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lxfonts)
-msgid ""
-"The bundle contains the traditional slides fonts revised to be completely usable both as text fonts and mathematics fonts; they are fully integrate with the new operators, letters, symbols and extensible delimiter fonts, as well as with the AMS fonts, all redone with the same stylistic parameters.\n"
-"\n"
-"date: 2008-08-22 08:50:40 +0000"
+#. summary(texlive-specs-q:texlive-pgfopts-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgfopts"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgfopts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgfopts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-pgfplots)
+msgid "Create normal/logarithmic plots in two and three dimensions"
msgstr ""
-#. description(texlive-logical-markup-utils)
+#. description(texlive-specs-q:texlive-pgfplots)
msgid ""
-"The bundle contains two packages: - quoted, for inserting quotation marks; and - onedash, for inserting dashes. Each package takes a language name as an option; accepted language options are american, british, german and polish.\n"
+"PGFPlots draws high-quality function plots in normal or logarithmic scaling with a user-friendly interface directly in TeX. The user supplies axis labels, legend entries and the plot coordinates for one or more plots and PGFPlots applies axis scaling, computes any logarithms and axis ticks and draws the plots, supporting line plots, scatter plots, piecewise constant plots, bar plots, area plots, mesh-- and surface plots and some more. Pgfplots is based on PGF/TikZ (pgf); it runs equally for LaTeX/TeX/ConTeXt.\n"
"\n"
-"date: 2009-11-09 22:05:00 +0000"
+"date: 2014-03-04 05:56:29 +0000"
msgstr ""
-#. description(texlive-soton)
-msgid ""
-"The bundle contains two packages: soton-palette which defines colour-ways, and soton-beamer, which uses the colours to produce compliant presentations.\n"
-"\n"
-"date: 2009-11-28 08:57:52 +0000"
+#. summary(texlive-specs-q:texlive-pgfplots-doc)
+#, fuzzy
+msgid "Documentation for texlive-pgfplots"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-pgfplots-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pgfplots"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-phaistos)
+msgid "Disk of Phaistos font"
msgstr ""
-#. description(texlive-l3packages)
+#. description(texlive-specs-q:texlive-phaistos)
msgid ""
-"The bundle holds prototype implementations of concepts for a LaTeX designer interface, to be used with the experimental LaTeX kernel as programming tools and kernel support. Packages provided in this release are: - l3keys2e, which makes the facilities of the kernel module l3keys available for use by LaTeX 2e packages; - xfrac, which provides flexible split-level fractions; - xparse, which provides a high-level interface for declaring document commands; and - xtemplate, which provides a means of defining generic functions using a key-value syntax. All the files of the bundle are also available in the Subversion (SVN) repository of the LaTeX3 Project. The bundle on CTAN is based on a snapshot of the SVN repository on 2012- 11-21.\n"
+"A font that contains all the symbols of the famous Disc of Phaistos, together with a LaTeX package. The disc was 'printed' by stamping the wet clay with some sort of punches, probably around 1700 BCE. The font is available in Adobe Type 1 and OpenType formats (the latter using the Unicode positions for the symbols). There are those who believe that this Cretan script was used to 'write' Greek (it is known, for example, that the rather later Cretan Linear B script was used to write Greek), but arguments for other languages have been presented.\n"
"\n"
-"date: 2013-03-12 09:55:10 +0000"
+"date: 2014-05-17 19:41:14 +0000"
msgstr ""
-#. description(texlive-nicetext)
-msgid ""
-"The bundle offers \"minimal\" markup syntax for various simple kinds of text. The user will typically involve little more than is printed, and will still get LaTeX quality. The bundle provides four packages: - wiki addresses general texts, marked up in the simple style used on Wikipedia; - niceverb is yet another means of documenting LaTeX packages: it offers syntax- aware typesetting of meta-variables (macro arguments) and for referring to commands (and their syntax) in footnotes, section titles etc.; - fifinddo aims to parse plain text or (La)TeX files using TeX, and to write the results to an external file; the package is used by another member of the bundle: - makedoc, which provides the means to produce typeset documentation direct from package files.\n"
-"\n"
-"date: 2012-12-02 12:05:20 +0000"
+#. summary(texlive-specs-q:texlive-phaistos-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-phaistos"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-q:texlive-phaistos-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-phaistos"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-phaistos-fonts)
+msgid "Severed fonts for texlive-phaistos"
msgstr ""
-#. description(texlive-japanese-otf-uptex)
-msgid ""
-"The bundle offers support of the fonts in the japanese-otf package, for use with the UpTeX distribution (version 0.20 or later).\n"
-"\n"
-"date: 2013-04-14 08:19:50 +0000"
+#. description(texlive-specs-q:texlive-phaistos-fonts)
+msgid "The separated fonts package for texlive-phaistos"
msgstr ""
-#. description(texlive-tabulars-e)
-msgid ""
-"The bundle presents the examples of the book \"Typesetting tables with LaTeX\" (ISBN 978-1-906860-25-7), as standalone documents.\n"
-"\n"
-"date: 2011-01-24 15:14:35 +0000"
+#. summary(texlive-specs-q:texlive-philex)
+msgid "Cross references for named and numbered environments"
msgstr ""
-#. description(texlive-trsym)
+#. description(texlive-specs-q:texlive-philex)
msgid ""
-"The bundle provides MetaFont sources for a small font used for (e.g.) Laplace transformations, together with a LaTeX .fd file and a package providing commands for the symbols' use in mathematics.\n"
+"Philex provides means for creating and cross-referencing named or numbered environments. Possible uses would be equations, example sentences (as in linguistics or philosophy) or named principles. Cross references may refer either to the number, or to a short name of the target environment, or to the contents of the environment. Philex builds on the facilities of the linguex package.\n"
"\n"
-"date: 2007-10-24 16:05:15 +0000"
+"date: 2014-03-28 19:06:26 +0000"
msgstr ""
-#. description(texlive-shuffle)
-msgid ""
-"The bundle provides a LaTeX package and a font (as MetaFont source) for the shuffle product which is used in some part of mathematics and physics.\n"
-"\n"
-"date: 2008-10-30 08:46:08 +0000"
+#. summary(texlive-specs-q:texlive-philex-doc)
+#, fuzzy
+msgid "Documentation for texlive-philex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-philex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-philex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-philokalia)
+msgid "A font to typeset the Philokalia Books"
msgstr ""
-#. description(texlive-latex-bib-ex)
+#. description(texlive-specs-q:texlive-philokalia)
msgid ""
-"The bundle provides a collection of files containing every example in the book \"Bibliografien mit LaTeX\" (ISBN 978- 3865414151), by the package author.\n"
+"The philokalia package has been designed to ease the use of the Philokalia-Regular OpenType font with XeLaTeX. The font started as a project to digitize the typeface used to typeset the Philokalia books.\n"
"\n"
-"date: 2012-04-02 11:07:24 +0000"
+"date: 2012-05-31 16:08:53 +0000"
msgstr ""
-#. description(texlive-powerdot-FUBerlin)
-msgid ""
-"The bundle provides a powerdot-derived class and a package for use with powerdot to provide the corporate design of the Free University in Berlin. Users may use the class itself (FUpowerdot) or use the package in the usual way with \\style=BerlinFU as a class option. Examples of using both the class and the package are provided; the PDF is visually identical, so the catalogue only lists one; the sources of the examples do of course differ.\n"
-"\n"
-"date: 2009-07-30 19:57:53 +0000"
+#. summary(texlive-specs-q:texlive-philokalia-doc)
+#, fuzzy
+msgid "Documentation for texlive-philokalia"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-philokalia-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-philokalia"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-q:texlive-philokalia-fonts)
+msgid "Severed fonts for texlive-philokalia"
msgstr ""
-#. description(texlive-luatexbase)
-msgid ""
-"The bundle provides basic facilities for LuaTeX macro programmers, mostly resource allocation and convenience packages. Provided are: - luatexbase-attr: attribute allocation; - luatexbase-cctb: catcode table allocation; - luatexbase-compat: compatibility helpers; - luatexbase-loader: Lua module loading; - luatexbase-modutils: Lua module declaration; - luatexbase-mcb: callbacks extension; and - luatexbase-regs: allocation of registers and the like. In addition, the (unadorned) luatexbase package loads all the above in one fell swoop.\n"
-"\n"
-"date: 2013-05-06 23:17:41 +0000"
+#. description(texlive-specs-q:texlive-philokalia-fonts)
+msgid "The separated fonts package for texlive-philokalia"
msgstr ""
-#. description(texlive-spanish-mx)
-msgid ""
-"The bundle provides files to support typesetting of texts in Spanish according to Mexican current practices, using babel. The files merge earlier work on a mexican.ldf, or may be used to define a configuration that will typeset all documents (that request babel's spanish option) to use the Mexican language facilities. (Note that this facility is only available with the recent (version >=4.2b) releases of the Spanish option.)\n"
-"\n"
-"date: 2009-01-10 15:42:45 +0000"
+#. summary(texlive-specs-q:texlive-philosophersimprint)
+msgid "Typesetting articles for \"Philosophers' Imprint\""
msgstr ""
-#. description(texlive-xint)
+#. description(texlive-specs-q:texlive-philosophersimprint)
msgid ""
-"The bundle provides four packages: - xint, which provides expandable TeX macros that implement the basic arithmetic operations of addition, subtraction, multiplication and division, as applied to arbitrarily long numbers represented as chains of digits with an optional minus sign; - xintgcd, which provides implementations of the Euclidean algorithm, and of its typesetting; - xintfrac, which computes fractions using xint; - xintseries, which computes partial sums using xint; and - xintcfrac, which deals with the computation of continued fractions. All of the packages' computations are done in a way that they can operate in an expanding environment. The packages may be used either with Plain TeX or LaTeX.\n"
+"In its mission statement we read \"Philosophers' Imprint is a refereed series of original papers in philosophy, edited by philosophy faculty at the University of Michigan, with the advice of an international Board of Editors, and published on the World Wide Web by the University of Michigan Digital Library. The mission of the Imprint is to promote a future in which funds currently spent on journal subscriptions are redirected to the dissemination of scholarship for free, via the Internet\". The class helps authors to typeset their own articles in \"Web-ready\" format. No assumption is made about the fonts available to the author: the class itself is restricted to freely available and freely distributed fonts, only.\n"
"\n"
-"date: 2013-05-26 21:35:00 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-przechlewski-book)
+#. summary(texlive-specs-q:texlive-philosophersimprint-doc)
+#, fuzzy
+msgid "Documentation for texlive-philosophersimprint"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-q:texlive-philosophersimprint-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-philosophersimprint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-phonetic)
+#, fuzzy
+#| msgid "Unicode Version of the Computer Modern Fonts"
+msgid "Metafont Phonetic fonts, based on Computer Modern"
+msgstr "Unicode verze písem Computer Modern"
+
+#. description(texlive-specs-r:texlive-phonetic)
msgid ""
-"The bundle provides machine-readable copies of the examples from the book \"Praca magisterska i dyplomowa z programem LaTeX\".\n"
+"The fonts are based on Computer Modern, and specified in Metafont. Macros for the fonts' use are provided, both for LaTeX 2.09 and for current LaTeX.\n"
"\n"
-"date: 2011-08-14 19:16:59 +0000"
+"date: 2014-05-23 15:08:48 +0000"
msgstr ""
-#. description(texlive-pitex)
-msgid ""
-"The bundle provides macros that the author uses when writing documentation (for example, that of the texapi and yax packages). The tools could be used by anyone, but there is no documentation, and the macros are subject to change without notice.\n"
-"\n"
-"date: 2011-11-18 00:28:58 +0000"
+#. summary(texlive-specs-r:texlive-phonetic-doc)
+#, fuzzy
+msgid "Documentation for texlive-phonetic"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-phonetic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-phonetic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-phonrule)
+msgid "Typeset linear phonological rules"
msgstr ""
-#. description(texlive-mwe)
+#. description(texlive-specs-r:texlive-phonrule)
msgid ""
-"The bundle provides several files useful when creating a minimal working example (MWE). The package itself loads a small set of packages often used when creating MWEs. In addition, a range of images are provided, which will be installed in the TEXMF tree, so that they may be used in any (La)TeX document. This allows different users to share MWEs which include image commands, without the need to share image files or to use replacement code.\n"
+"The package provides macros for typesetting phonological rules like those in 'Sound Pattern of English' (Chomsky and Halle 1968).\n"
"\n"
-"date: 2012-05-15 13:44:48 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-thmtools)
+#. summary(texlive-specs-r:texlive-phonrule-doc)
+#, fuzzy
+msgid "Documentation for texlive-phonrule"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-phonrule-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-phonrule"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-photo)
+#, fuzzy
+msgid "A float environment for photographs"
+msgstr "Vývojářské prostředí pro libdvdread"
+
+#. description(texlive-specs-r:texlive-photo)
msgid ""
-"The bundle provides several packages for commonly-needed support for typesetting theorems. The packages should work with kernel theorems (theorems 'out of the box' with LaTeX), and the theorem and amsthm packages. Features of the bundle include: - a key-value interface to \\newtheorem; - a \\listoftheorems command; - hyperref and autoref compatibility; - a mechanism for restating entire theorems in a single macro call.\n"
+"This package introduces a new float type called photo which works similar to the float types table and figure. Various options exist for placing photos, captions, and a \"photographer\" line. In twocolumn documents, a possibility exists to generate double-column floats automatically if the photo does not fit into one column. Photos do not have to be placed as floats, they can also be placed as boxes, with captions and photographer line still being available.\n"
"\n"
-"date: 2012-04-27 09:57:13 +0000"
+"date: 2012-06-12 21:14:44 +0000"
msgstr ""
-#. description(texlive-luaintro)
-msgid ""
-"The bundle provides source of all the examples published in the German book \"Einfuhrung in LuaTeX und LuaLaTeX\", published by Lehmans Media and DANTE, Berlin.\n"
-"\n"
-"date: 2013-02-13 12:36:17 +0000"
+#. summary(texlive-specs-r:texlive-photo-doc)
+#, fuzzy
+msgid "Documentation for texlive-photo"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-photo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-photo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-physics)
+msgid "Macros supporting the Mathematics of Physics"
msgstr ""
-#. description(texlive-ucs)
+#. description(texlive-specs-r:texlive-physics)
msgid ""
-"The bundle provides the ucs package, and utf8x.def, together with a large number of support files. The utf8x.def definition file for use with inputenc covers a wider range of Unicode characters than does utf8.def in the LaTeX distribution. The package provides facilities for efficient use of its large sets of Unicode characters. Glyph production may be controlled by various options, which permits use of non-ASCII characters when coding mathematical formulae. Note that the bundle previously had an alias \"unicode\"; that alias has now been withdrawn, and no package of that name now exists.\n"
+"The package defines simple and flexible macros for typesetting equations in the languages of vector calculus and linear algebra, using Dirac notation.\n"
"\n"
-"date: 2013-05-12 14:23:52 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-muthesis)
-msgid ""
-"The bundle provides thesis and project report document classes from the University of Manchester's Department of Computer Science.\n"
-"\n"
-"date: 2011-08-26 06:26:07 +0000"
+#. summary(texlive-specs-r:texlive-physics-doc)
+msgid "Documentation for texlive-physics"
msgstr ""
-#. description(texlive-sudokubundle)
-msgid ""
-"The bundle provides three packages: - printsudoku, which provides a command \\sudoku whose argument is the name of a file containing a puzzle specification; - solvesudoku, which attempts to find a solution to the puzzle in the file named in the argument; and - createsudoku, which uses the random package to generate a puzzle according to a bunch of parameters that the user sets via macros. The bundle comes with a set of ready- prepared puzzle files.\n"
-"\n"
-"date: 2007-03-12 10:51:09 +0000"
+#. description(texlive-specs-r:texlive-physics-doc)
+msgid "This package includes the documentation for texlive-physics"
msgstr ""
-#. description(texlive-morehype)
-msgid ""
-"The bundle provides three packages: - texlinks: shorthand macros for TeX-related external hyperlinks with hyperref, the blog package in the present bundle, etc; - hypertoc: adjust the presentation of coloured frames in hyperref tables of contents (article class only); - blog: fast generation of simple HTML by expanding LaTeX macros, using the fifinddo package.\n"
-"\n"
-"date: 2013-01-23 11:31:43 +0000"
+#. summary(texlive-specs-r:texlive-physymb)
+msgid "Assorted macros for Physicists"
msgstr ""
-#. description(texlive-kdgdocs)
+#. description(texlive-specs-r:texlive-physymb)
msgid ""
-"The bundle provides two classes for usage by KdG professors and master students: - kdgcoursetext: for writing course texts, and\n"
-"- kdgmasterthesis: for writing master's theses. The bundle replaces the original kdgcoursetext package (now removed from the archive).\n"
+"The package contains a large collection of small macros that may be useful to physicists and occasionally some mathematicians. It streamlines writing Dirac notation, derivatives, vector variables, unit vectors, scientific notation, elementary particles, and many other things.\n"
"\n"
-"date: 2011-11-02 23:18:47 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-williams)
-msgid ""
-"The bundle provides two packages: - antree, which provides macros for annotated node trees, and - toklist, which is an implementation of Knuth's token list macros, to be found on pp.378-379 of the TeXbook.\n"
-"\n"
-"date: 2009-01-30 13:29:16 +0000"
+#. summary(texlive-specs-r:texlive-physymb-doc)
+#, fuzzy
+msgid "Documentation for texlive-physymb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-physymb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-physymb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-piano)
+msgid "Typeset a basic 2-octave piano diagram"
msgstr ""
-#. description(texlive-newtx)
+#. description(texlive-specs-r:texlive-piano)
msgid ""
-"The bundle splits txfonts.sty (from the TX fonts distribution) into two independent packages, ntxtext.sty and ntxmath.sty, each with fixes and enhancements. Ntxmath's metrics have been re-evaluated to provide a less tight appearance, and to provide a libertine option that substitutes Libertine italic and Greek letter for the existing math italic and Greek glyphs, making a mathematics package that matches Libertine text quite well. Ntxmath can also use the maths italic font provided with the garamondx package, thus offering a garamond-alike text-with- maths combination.\n"
+"This package adds the \\keyboard[1][2]..[7] command to your project. When used, it draws a small 2 octaves piano keyboard on your document, with up to 7 keys highlighted. Keys go : Co, Cso, Do, Dso, Eo, Fo, Fso, Go, Gso, Ao, Aso, Bo, Ct, Cst, Dt, Dst, Et, Ft, Fst, Gt, Gst, At, Ast and Bt. (A working example is included in the README file.)\n"
"\n"
-"date: 2013-05-20 09:34:04 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xdvi)
-msgid ""
-"The canonical previewer for use on Unix and other X-windows based systems. The distribution has been integrated with that of xdvik (no longer separately available), so that it will build with web2c \"out of the box\". In practice, it is usually distributed via Tex-live.\n"
-"\n"
-"date: 2013-05-08 09:16:41 +0000"
+#. summary(texlive-specs-r:texlive-piano-doc)
+#, fuzzy
+msgid "Documentation for texlive-piano"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-piano-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-piano"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-picinpar)
+msgid "Insert pictures into paragraphs"
msgstr ""
-#. description(texlive-meetingmins)
+#. description(texlive-specs-r:texlive-picinpar)
msgid ""
-"The class allows formatting of meeting minutes using \\section commands (which provide hierarchical structure). An agenda can also be produced for distribution prior to the meeting, with user-selected portions suppressed from printing.\n"
+"A legacy package for creating 'windows' in paragraphs, for inserting graphics, etc. (including \"dropped capitals\"). Users should note that Piet van Oostrum (in a published review of packages of this sort) does not recommend this package; Picins is recommended instead.\n"
"\n"
-"date: 2012-09-24 20:36:26 +0000"
+"date: 2012-06-13 07:18:45 +0000"
msgstr ""
-#. description(texlive-IEEEtran)
+#. summary(texlive-specs-r:texlive-picinpar-doc)
+#, fuzzy
+msgid "Documentation for texlive-picinpar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-picinpar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-picinpar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pict2e)
+#, fuzzy
+msgid "New implementation of picture commands"
+msgstr "Svobodná implementace IEEE 802.1X protokolu"
+
+#. description(texlive-specs-r:texlive-pict2e)
msgid ""
-"The class and its BibTeX style enable authors to produce officially-correct output for the Institute of Electrical and Electronics Engineers (IEEE) transactions, journals and conferences.\n"
+"This package was described in the 2nd edition of 'LaTeX: A Document Preparation System', but the LaTeX project team declined to produce the package. For a long time, LaTeX has included a 'pict2e package' that merely produced an apologetic error message. The new package extends the existing LaTeX picture environment, using the familiar technique (cf. the graphics and color packages) of driver files (at present, drivers for PostScript output from LaTeX, and for use with PDFLaTeX are available). The package documentation has a fair number of examples of use, showing where things are improved by comparison with the LaTeX picture environment.\n"
"\n"
-"date: 2013-01-02 10:09:21 +0000"
+"date: 2014-01-13 10:26:35 +0000"
msgstr ""
-#. description(texlive-ucdavisthesis)
-msgid ""
-"The class conforms to the University's requirements for 2009.\n"
-"\n"
-"date: 2010-03-15 07:48:16 +0000"
+#. summary(texlive-specs-r:texlive-pict2e-doc)
+#, fuzzy
+msgid "Documentation for texlive-pict2e"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pict2e-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pict2e"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pictex)
+msgid "Picture drawing macros for TeX and LaTeX"
msgstr ""
-#. description(texlive-petiteannonce)
+#. description(texlive-specs-r:texlive-pictex)
msgid ""
-"The class enables you to create the sort of adverts that you pin on a noticeboard, with tear-off strips at the bottom where you can place contact details.\n"
+"PicTeX is an early, and very comprehensive drawing package, that mostly draws by placing myriads of small dots to make up pictures. It has a tendency to run out of space, most especially of allowable dimensions registers; packages m-pictex and pictexwd deal with the register problem, in different ways. Note that full documentation may be bought via the PC-TeX site, though a command summary is available as free software. Alternatively, a front-end package such as mathsPiC, which covers all of PicTeX and has a complete and free manual, could be used.\n"
"\n"
-"date: 2012-04-11 13:11:02 +0000"
+"date: 2012-03-05 12:29:35 +0000"
msgstr ""
-#. description(texlive-uothesis)
-msgid ""
-"The class generates documents that are suitable for submission to the Graduate School and conform with the style requirements for dissertations and theses as laid out in the Fall 2010 UO graduate school student manual.\n"
-"\n"
-"date: 2012-02-09 16:36:54 +0000"
+#. summary(texlive-specs-r:texlive-pictex-doc)
+#, fuzzy
+msgid "Documentation for texlive-pictex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pictex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pictex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pictex2)
+msgid "Adds relative coordinates and improves the \\plot command"
msgstr ""
-#. description(texlive-screenplay)
+#. description(texlive-specs-r:texlive-pictex2)
msgid ""
-"The class implements the format recommended by the Academy of Motion Picture Arts and Sciences.\n"
+"Adds two user commands to standard PiCTeX. One command uses relative coordinates, thus eliminating the need to calculate the coordinate of every point manually as in standard PiCTeX. The other command modifies \\plot to use a rule instead of dots if the line segment is horizontal or vertical.\n"
"\n"
-"date: 2012-07-03 22:53:20 +0000"
+"date: 2012-06-13 07:18:45 +0000"
msgstr ""
-#. description(texlive-matc3mem)
-msgid ""
-"The class is a development of memoir, with additions (specifically, mathematical extensions) that provide support for writing the books for the Matematica C3 project to produce free mathematical textbooks for use in Italian high schools.\n"
-"\n"
-"date: 2013-04-14 08:19:50 +0000"
+#. summary(texlive-specs-r:texlive-pictexsum)
+msgid "A summary of PicTeX commands"
msgstr ""
-#. description(texlive-sffms)
+#. description(texlive-specs-r:texlive-pictexsum)
msgid ""
-"The class is designed for typesetting science fiction and fantasy manuscripts. Sffms now includes several options for specific publishers as well as extensive documentation aimed at new LaTeX users.\n"
+"The document summarises the commands of PicTeX. While it is no substitute for the PicTeX manual itself (available from Personal TeX inc.), the document is a useful aide-memoire for those who have read the manual.\n"
"\n"
-"date: 2007-01-14 21:06:18 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-uestcthesis)
-msgid ""
-"The class is for typesetting a thesis at the University of Electronic Science and Technology of China.\n"
-"\n"
-"date: 2013-05-27 18:07:27 +0000"
+#. summary(texlive-specs-r:texlive-piechartmp)
+msgid "Draw pie-charts using MetaPost"
msgstr ""
-#. description(texlive-skrapport)
+#. description(texlive-specs-r:texlive-piechartmp)
msgid ""
-"The class is intgended for simple documents (e.g., reports handed in as coursework and the like). The class is small and straightforward; its design was inspired by that of the PracTeX journal style.\n"
+"The piechartmp package is an easy way to draw pie-charts with MetaPost. The package implements an interface that enables users with little MetaPost experience to draw charts. A highlight of the package is the possibility of suppressing some segments of the chart, thus creating the possibility of several charts from the same data.\n"
"\n"
-"date: 2013-03-28 17:38:42 +0000"
+"date: 2012-07-19 12:34:01 +0000"
msgstr ""
-#. description(texlive-suftesi)
-msgid ""
-"The class is specifically designed for use with theses in the humanities.\n"
-"\n"
-"date: 2013-04-17 15:07:05 +0000"
+#. summary(texlive-specs-r:texlive-piechartmp-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-piechartmp"
+msgstr "Dokumentace pro digiKam"
+
+#. description(texlive-specs-r:texlive-piechartmp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-piechartmp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-piff)
+msgid "Macro tools by Mike Piff"
msgstr ""
-#. description(texlive-umthesis)
+#. description(texlive-specs-r:texlive-piff)
msgid ""
-"The class loads book class, and makes minimal changes to it; its coding aims to be as robust as possible, and as a result it has few conflicts with potential add-on packages.\n"
+"The set (now) consists of: a small package for dealing with duplicate-numbered output pages; newproof, for defining mathematical proof structures; onepagem for omitting the page number in one-page documents and time, which prints a 12-hour format time.\n"
"\n"
-"date: 2009-09-17 18:11:38 +0000"
+"date: 2013-12-03 17:41:19 +0000"
msgstr ""
-#. description(texlive-image-gallery)
-msgid ""
-"The class may be used to create an overview of pictures from a digital camera or from other sources. It is possible to adjust the size of the pictures and all the margins. The example file shows the usage.\n"
-"\n"
-"date: 2008-08-19 21:32:24 +0000"
+#. summary(texlive-specs-r:texlive-piff-doc)
+#, fuzzy
+msgid "Documentation for texlive-piff"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-piff-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-piff"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pigpen)
+msgid "A font for the pigpen (or masonic) cipher"
msgstr ""
-#. description(texlive-sugconf)
+#. description(texlive-specs-r:texlive-pigpen)
msgid ""
-"The class may be used to typeset articles to be published in the proceedings of SAS(R) User group conferences and workshops. The layout produced by the class is based on that published by SAS Institute (2006).\n"
+"The Pigpen cipher package provides the font and the necessary wrappers (style file, etc.) in order to write Pigpen ciphers, a simple substitution cipher. The package provides a font (available both as Metafont source, and as an Adobe Type 1 file), and macros for its use.\n"
"\n"
-"date: 2008-04-16 09:52:05 +0000"
+"date: 2014-05-23 15:08:48 +0000"
msgstr ""
-#. description(texlive-uiucredborder)
-msgid ""
-"The class offers a means of filling out the \"red-bordered form\" that gets signed by the department head, your advisor, and -- for doctoral dissertations -- your thesis committee members.\n"
-"\n"
-"date: 2013-04-16 09:30:34 +0000"
+#. summary(texlive-specs-r:texlive-pigpen-doc)
+#, fuzzy
+msgid "Documentation for texlive-pigpen"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pigpen-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pigpen"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pigpen-fonts)
+msgid "Severed fonts for texlive-pigpen"
msgstr ""
-#. description(texlive-ryethesis)
-msgid ""
-"The class offers support for formatting a thesis, dissertation or project according to Ryerson University's School of Graduate Studies thesis formatting regulations.\n"
-"\n"
-"date: 2011-02-05 09:59:30 +0000"
+#. description(texlive-specs-r:texlive-pigpen-fonts)
+msgid "The separated fonts package for texlive-pigpen"
msgstr ""
-#. description(texlive-imtekda)
-msgid ""
-"The class permits typesetting of diploma, bachelor's and master's theses for the Institute of Microsystem Technology (IMTEK) at the University of Freiburg (Germany). The class is based on the KOMA-Script class scrbook. Included in the documentation is a large collection of useful tips for typesetting theses and a list of recommended packages.\n"
-"\n"
-"date: 2010-04-03 14:55:02 +0000"
+#. summary(texlive-specs-r:texlive-pinlabel)
+msgid "A TeX labelling package"
msgstr ""
-#. description(texlive-uiucthesis)
+#. description(texlive-specs-r:texlive-pinlabel)
msgid ""
-"The class produces a document that conforms to the format described in the University's Handbook for Graduate Students Preparing to Deposit.\n"
+"Pinlabel is a labelling package for attaching perfectly formatted TeX labels to figures and diagrams in both eps and pdf formats. It is suitable both for labelling a new diagram and for relabelling an existing diagram. The package uses coordinates derived from GhostView (or gv) and labels are placed with automatic and consistent spacing relative to the object labelled.\n"
"\n"
-"date: 2007-01-20 14:20:16 +0000"
+"date: 2012-06-08 13:42:15 +0000"
msgstr ""
-#. description(texlive-mycv)
+#. summary(texlive-specs-r:texlive-pinlabel-doc)
+#, fuzzy
+msgid "Documentation for texlive-pinlabel"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pinlabel-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pinlabel"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pitex)
+#, fuzzy
+msgid "Documentation macros"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-r:texlive-pitex)
msgid ""
-"The class provides a set of functionality for writing \"curriculum vitae\" with different layouts. The idea is that a user can write some custom configuration directives, by means of which is possible both to produce different c.v. layouts and quickly switch among them. In order to process such directives, the class uses a set of lists, provided by the package etextools. Basic support for using TikZ decorations is also provided.\n"
+"The bundle provides macros that the author uses when writing documentation (for example, that of the texapi and yax packages). The tools could be used by anyone, but there is no documentation, and the macros are subject to change without notice.\n"
"\n"
-"date: 2012-05-21 08:58:59 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-resumecls)
-msgid ""
-"The class provides a simple resumee structure that works, natively, with both Chinese and English text.\n"
-"\n"
-"date: 2013-03-17 09:58:10 +0000"
+#. summary(texlive-specs-r:texlive-pitex-doc)
+#, fuzzy
+msgid "Documentation for texlive-pitex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pitex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pitex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pittetd)
+msgid "Electronic Theses and Dissertations at Pitt"
msgstr ""
-#. description(texlive-knittingpattern)
+#. description(texlive-specs-r:texlive-pittetd)
msgid ""
-"The class provides a simple, effective method for knitters to produce high-quality, attractive patterns using LaTeX. It does this by providing commands to handle as much of the layout of the document as possible, leaving the author free to concentrate on the pattern.\n"
+"A document class for theses and dissertations. Provides patch files that enable pittetd to use files prepared for use with the pittdiss or pitthesis classes. The manual provides a detailed guide for users who wish to use the class to prepare their thesis or dissertation.\n"
"\n"
-"date: 2010-03-09 12:13:30 +0000"
+"date: 2011-11-28 00:09:49 +0000"
msgstr ""
-#. description(texlive-moderncv)
+#. summary(texlive-specs-r:texlive-pittetd-doc)
+#, fuzzy
+msgid "Documentation for texlive-pittetd"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pittetd-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pittetd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pkfix)
+#, fuzzy
+msgid "Replace pk fonts in PostScript with Type 1 fonts"
+msgstr "Konvertor True Type fontů na PostScript Type 1 fonty"
+
+#. description(texlive-specs-r:texlive-pkfix)
msgid ""
-"The class provides facilities for typesetting modern curriculums vitae, both in a classic and in a casual style. It is fairly customizable, allowing you to define your own style by changing the colours, the fonts, etc. A number of templates are provided in the distribution examples subdirectory.\n"
+"The perl script pkfix looks for DVIPSBitmapFont comments in PostScript files, generated by 'not too old' dvips, and replaces them by type 1 versions of the fonts, if possible.\n"
"\n"
-"date: 2013-04-30 06:59:42 +0000"
+"date: 2012-06-08 14:04:26 +0000"
msgstr ""
-#. description(texlive-sageep)
-msgid ""
-"The class provides formatting for papers for the annual meeting of the Environmental and Engineering Geophysical Society (EEGS) (\"Application of Geophysics to Engineering and Environmental Problems\", known as SAGEEP).\n"
-"\n"
-"date: 2009-01-23 10:09:06 +0000"
+#. summary(texlive-specs-r:texlive-pkfix-doc)
+#, fuzzy
+msgid "Documentation for texlive-pkfix"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pkfix-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pkfix"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pkfix-helper)
+msgid "Make PostScript files accessible to pkfix"
msgstr ""
-#. description(texlive-nlctdoc)
+#. description(texlive-specs-r:texlive-pkfix-helper)
msgid ""
-"The class provides support for the documentation of the author's packages, using koma-script. This class is provided \"as is\" solely for the benefit of anyone who wants to compile the documentation of those packages.\n"
+"Pkfix is a useful utility for replacing resolution-dependent bitmapped fonts in a dvips-produced PostScript file with the corresponding resolution-independent vector fonts. Unfortunately, pkfix needs to parse certain PostScript comments that appear only in files produced by dvips versions later than 5.58 (ca. 1996); it fails to work on PostScript files produced by older versions of dvips. Pkfix-helper is a program that attempts to insert newer-dvips comments into an older-dvips PostScript file, thereby making the file suitable for processing by pkfix. pkfix-helper can sometimes process documents fully autonomously but does require the user to verify and, if needed, correct its decisions.\n"
"\n"
-"date: 2012-07-19 23:08:10 +0000"
+"date: 2012-06-08 14:04:26 +0000"
msgstr ""
-#. description(texlive-skdoc)
-msgid ""
-"The class provides the functionality and implementation of packages and document classes. It is loosely based on the ydoc and ltxdoc classes, but has a number of incompatible differences. The class defines a MacroCode environment which offers an alternative to the the usual docstrip method of installing packages. It has the ability to generate both documentation and code in a single run of a single file.\n"
-"\n"
-"date: 2013-05-25 15:03:59 +0000"
+#. summary(texlive-specs-r:texlive-pkfix-helper-doc)
+#, fuzzy
+msgid "Documentation for texlive-pkfix-helper"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pkfix-helper-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pkfix-helper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pkgloader)
+msgid "Managing the options and loading order of other packages"
msgstr ""
-#. description(texlive-imsproc)
+#. description(texlive-specs-r:texlive-pkgloader)
msgid ""
-"The class typesets papers for IMS (Iranian Mathematical Society) conference proceedings. The class uses the XePersian package.\n"
+"The package seeks to address the frustration caused by package conflicts. It is in an early stage of its development, and should probably not be used as a matter of course; however the author welcomes feedback via the home page link given in this catalogue entry. Nevertheless, the author urges users to try the package and to report issues (or whatever) via the package's repository.\n"
"\n"
-"date: 2013-04-04 10:47:47 +0000"
+"date: 2014-05-22 10:56:12 +0000"
msgstr ""
-#. description(texlive-sapthesis)
-msgid ""
-"The class will typeset Ph.D., Master, and Bachelor theses that adhere to the publishing guidelines of the Sapienza-University of Rome.\n"
-"\n"
-"date: 2012-11-23 10:17:42 +0000"
+#. summary(texlive-specs-r:texlive-pkgloader-doc)
+#, fuzzy
+msgid "Documentation for texlive-pkgloader"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pkgloader-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pkgloader"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pkuthss)
+msgid "LaTeX template for dissertations in Peking University"
msgstr ""
-#. description(texlive-seetexk)
+#. description(texlive-specs-r:texlive-pkuthss)
msgid ""
-"The collection comprises: - dvibook, which will rearrange the pages of a DVI file into 'signatures' as used when printing a book; - dviconcat, for concatenating pages of DVI file(s); - dviselect, which will select pages from one DVI file to create a new DVI file; - dvitodvi, which will rearrange the pages of a DVI file to create a new file; and - libtex, a library for manipulating the files, from the old SeeTeX project. The utilities are provided as C source with Imakefiles, and an MS- DOS version of dvibook is also provided.\n"
+"The package provides a simple, clear and flexible LaTeX template for dissertations in Peking University.\n"
"\n"
-"date: 2012-04-10 13:00:16 +0000"
+"date: 2014-05-23 22:37:52 +0000"
msgstr ""
-#. description(texlive-logbox)
-msgid ""
-"The command \\logbox does \\showbox without stopping the compilation. The package's main command is \\viewbox*: the box is typeset (copied) with its dimensions, and its contents are logged in the .log file.\n"
-"\n"
-"date: 2011-11-03 07:30:49 +0000"
+#. summary(texlive-specs-r:texlive-pkuthss-doc)
+msgid "Documentation for texlive-pkuthss"
msgstr ""
-#. description(texlive-url)
-msgid ""
-"The command \\url is a form of verbatim command that allows linebreaks at certain characters or combinations of characters, accepts reconfiguration, and can usually be used in the argument to another command. (The \\urldef command provides robust commands that serve in cases when \\url doesn't work in an argument.) The command is intended for email addresses, hypertext links, directories/paths, etc., which normally have no spaces, so by default the package ignores spaces in its argument. However, a package option \"allows spaces\", which is useful for operating systems where spaces are a common part of file names.\n"
-"\n"
-"date: 2010-01-27 22:13:46 +0000"
+#. description(texlive-specs-r:texlive-pkuthss-doc)
+msgid "This package includes the documentation for texlive-pkuthss"
msgstr ""
-#. description(texlive-pdftools)
-msgid ""
-"The command-line programs pdfopen and pdfclose allow you to control the X Window System version of Adobe's Acrobat Reader from the command line or from within a (shell) script. The programs work with Acrobat Reader 5, 7, 8 and 9 for Linux, xpdf and evince. This version derives from one written by Fabrice Popineau for Microsoft operating systems.\n"
-"\n"
-"date: 2012-09-07 14:54:33 +0000"
+#. summary(texlive-specs-r:texlive-pl)
+msgid "Polish extension of CM fonts in Type 1 format"
msgstr ""
-#. description(texlive-import)
+#. description(texlive-specs-r:texlive-pl)
msgid ""
-"The commands \\import{full_path}{file} and \\subimport{path_extension}{file} set up input through standard LaTeX mechanisms (\\input, \\include and \\includegraphics) to load files relative to the \\import-ed directory. There are also \\includefrom, \\subincludefrom, and * variants of the commands.\n"
+"This package is the Polish extension of the Computer Modern fonts (known as PL fonts),in Adobe Type 1 (PostScript) format. The fonts use the same .tfm files as for the version generated by Metafont. This release of fonts was adapted to the (mostly guessed) demands of the Windows environment, while keeping the fonts usable with TeX; however, encoding files are now added, as Windows and TeX use different encoding schemes.\n"
"\n"
-"date: 2010-03-09 12:05:51 +0000"
+"date: 2012-06-08 15:19:18 +0000"
msgstr ""
-#. description(texlive-unicode-math)
-msgid ""
-"The current release of this package typesets mathematics with unicode input and using OpenType maths fonts. (There is little compatibility with older maths packages.) XeTeX support is well tested, though LuaTeX support less so. The package can typeset using STIX fonts, the XITS development of those fonts, the Asana-Math fonts, the Latin Modern Math, and the TeX Gyre Math font familiess, as well as the commercial Cambria Math fonts. There is no support for extra alphabets in the Unicode 'private use area'. The package relies on recent versions of the fontspec package and the l3kernel and l3packages bundles.\n"
-"\n"
-"date: 2013-03-17 14:18:45 +0000"
+#. summary(texlive-specs-r:texlive-pl-doc)
+#, fuzzy
+msgid "Documentation for texlive-pl"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pl-fonts)
+msgid "Severed fonts for texlive-pl"
msgstr ""
-#. description(texlive-magaz)
-msgid ""
-"The current version does special formatting for the first line of text in a paragraph. The package is part of a larger body of tools which remain in preparation.\n"
-"\n"
-"date: 2011-11-29 10:02:24 +0000"
+#. description(texlive-specs-r:texlive-pl-fonts)
+msgid "The separated fonts package for texlive-pl"
msgstr ""
-#. description(texlive-pxpgfmark)
-msgid ""
-"The distributed drivers do not support the PGF feature of \"inter-picture connections\" under e-pTeX and dvipdfmx. The package uses existing features of dvipdfmx to fix this problem\n"
-"\n"
-"date: 2013-05-02 09:19:37 +0000"
+#. summary(texlive-specs-r:texlive-placeat)
+msgid "Absolute content positioning"
msgstr ""
-#. description(texlive-ptptex)
+#. description(texlive-specs-r:texlive-placeat)
msgid ""
-"The distribution contains the class (which offers an option file for preprints), and a template. The class requires the cite, overcite and wrapfig packages.\n"
+"The package provides commands so that the user of LuaLaTeX may position arbitrary content at any position specified by absolute coordinates on the page. The package draws a grid on each page of the document, to aid positioning (the grid may be disabled, for 'final copy' using the command \\placeatsetup).\n"
"\n"
-"date: 2008-11-22 14:14:22 +0000"
+"date: 2014-04-25 09:20:11 +0000"
msgstr ""
-#. description(texlive-odsfile)
+#. summary(texlive-specs-r:texlive-placeat-doc)
+#, fuzzy
+msgid "Documentation for texlive-placeat"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-placeat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-placeat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-placeins)
+msgid "Control float placement"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-placeins)
msgid ""
-"The distribution includes a package and a lua library that can together read OpenDocument spreadsheet documents as LaTeX tables. Cells in the tables may be processed by LaTeX macros, so that (for example) the package may be used for drawing some plots. The package uses lua's zip library.\n"
+"Defines a \\FloatBarrier command, beyond which floats may not pass; useful, for example, to ensure all floats for a section appear before the next \\section command.\n"
"\n"
-"date: 2012-08-13 09:41:25 +0000"
+"date: 2012-06-08 14:04:26 +0000"
msgstr ""
-#. summary(tomcat:tomcat-docs-webapp)
-msgid "The docs web application for Apache Tomcat"
-msgstr ""
+#. summary(texlive-specs-r:texlive-placeins-doc)
+#, fuzzy
+msgid "Documentation for texlive-placeins"
+msgstr "Dokumentace pro adaptx"
-#. description(tomcat:tomcat-docs-webapp)
-msgid "The docs web application for Apache Tomcat."
+#. description(texlive-specs-r:texlive-placeins-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-placeins"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-placeins-plain)
+msgid "Insertions that keep their place"
msgstr ""
-#. description(texlive-l2picfaq)
+#. description(texlive-specs-r:texlive-placeins-plain)
msgid ""
-"The document (in German) is a collection of \"how-to\" notes about LaTeX and pictures. The aim of the document is to provide a solution, in the form of some sample code, for every problem.\n"
+"This TeX file provides various mechanisms (for plain TeX and close relatives) to let insertions (footnotes, topins, pageins, etc.) float within their appropriate section, but to prevent them from intruding into the following section, even when sections do not normally begin a new page. (If your sections normally begin a new page, just use \\supereject to flush out insertions.)\n"
"\n"
-"date: 2010-08-29 13:51:21 +0000"
+"date: 2012-06-08 14:04:26 +0000"
msgstr ""
-#. description(texlive-iwhdp)
+#. summary(texlive-specs-r:texlive-plain)
+msgid "The Plain TeX format"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-plain)
msgid ""
-"The document class is for creating Discussion Papers of the Halle Institute for Economic Research (IWH) in Halle, Germany. The class offers options for both English and German texts.\n"
+"Contains files used to build the Plain TeX format, as described in the TeXbook, together with various supporting files (some also discussed in the book).\n"
"\n"
-"date: 2012-09-10 13:57:53 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-plain-doc)
+#. summary(texlive-specs-r:texlive-plain-doc)
+msgid "A list of plain.tex cs names"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-plain-doc)
msgid ""
"The document constitutes a list of every control sequence name (csname) described in the TeXbook, together with an indication of whether the csname is a primitive TeX command, or is defined in plain.tex\n"
"\n"
"date: 2012-04-25 13:23:25 +0000"
msgstr ""
-#. description(texlive-svg-inkscape)
-msgid ""
-"The document demonstrates the use of SVG imainges in LaTeX documents. Using the \"PDF+LaTeX output\" option of Inkscape, it is possible to include SVG in documents, in which LaTeX typesets the text. This results in uniform text style throughout the document, including text in images; moreover, LaTeX commands may be used in the image's text, providing such things as mathematics and references. The document also describes how to automate the conversion from SVG to PDF+LaTeX using Inkscape.\n"
-"\n"
-"date: 2010-09-08 10:29:06 +0000"
-msgstr ""
+#. summary(texlive-specs-r:texlive-plainpkg)
+#, fuzzy
+#| msgid "Extra packages"
+msgid "A minimal method for making generic packages"
+msgstr "Dodatečné balíčky"
-#. description(texlive-lshort-english)
+#. description(texlive-specs-r:texlive-plainpkg)
msgid ""
-"The document derives from a German introduction ('lkurz'), which was translated and updated; it continues to be updated. This translation has, in its turn, been translated into Finnish, French, German, Italian, Japanese, Korean, Mongolian, Persian (Farsi), Polish, Portuguese, Brazilian Portuguese, Russian, Slovak, Slovenian, Spanish and Ukranian. Not all translations are of the current English version, of course.\n"
+"The package provides a minimal method for making generic (i.e., TeX-format-independent) packaged, combining maybeload functionality, fallback definitions for LaTeX \\ProvidesPackage and \\RequirePackage functionality, and handling of arbitrary (multiple) \"private letters\" (analagous LaTeX packages' use of \"@\") in nested package files. The documentation contains a central reference for making and using generic packages based on the package.\n"
"\n"
-"date: 2011-04-06 13:14:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex-overview)
-msgid ""
-"The document gives a short overview of TeX and its children, as well as the macro packages LaTeX and ConTeXt.\n"
-"\n"
-"date: 2012-09-16 17:39:43 +0000"
+#. summary(texlive-specs-r:texlive-plainpkg-doc)
+msgid "Documentation for texlive-plainpkg"
msgstr ""
-#. description(texlive-lualatex-doc-de)
-msgid ""
-"The document is a German translation of the map/guide to the world of LuaLaTeX. Coverage supports both new users and package developers. Apart from the introductory material, the document gathers information from several sources, and offers links to others.\n"
-"\n"
-"date: 2013-05-14 15:57:54 +0000"
+#. description(texlive-specs-r:texlive-plainpkg-doc)
+msgid "This package includes the documentation for texlive-plainpkg"
msgstr ""
-#. description(texlive-lualatex-doc)
-msgid ""
-"The document is a map/guide to the world of LuaLaTeX. Coverage supports both new users and package developers. Apart from the introductory material, the document gathers information from several sources, and offers links to others.\n"
-"\n"
-"date: 2013-05-14 15:42:28 +0000"
+#. summary(texlive-specs-r:texlive-plantslabels)
+msgid "Write labels for plants"
msgstr ""
-#. description(texlive-latex-notes-zh-cn)
+#. description(texlive-specs-r:texlive-plantslabels)
msgid ""
-"The document is an introduction to TeX/LaTeX, in Chinese. It covers basic text typesetting, mathematics, graphics, tables, Chinese language & fonts, and some miscellaneous features (hyperlinks, long documents, bibliographies, indexes and page layout).\n"
+"The package defines a command \\plant, which has three mandatory and seven optional argument. The package uses the labels\n"
"\n"
-"date: 2009-11-09 21:53:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-latex-brochure)
-msgid ""
-"The document is designed as a publicity flyer for LaTeX, but also serves as an interesting showcase of what LaTeX can do. The flyer is designed for printing, double-sided, on A3 paper, which would then be folded once.\n"
-"\n"
-"date: 2013-01-22 17:02:11 +0000"
+#. summary(texlive-specs-r:texlive-plantslabels-doc)
+#, fuzzy
+msgid "Documentation for texlive-plantslabels"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-plantslabels-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-plantslabels"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-plari)
+msgid "Typesetting stageplay scripts"
msgstr ""
-#. description(texlive-titlepages)
+#. description(texlive-specs-r:texlive-plari)
msgid ""
-"The document provides examples of over two dozen title page designs based on a range of published books and theses, together with the LaTeX code used to create them.\n"
+"Plari (the name comes from the Finnish usage for the working copy of a play) is a report-alike class, without section headings, and with paragraphs vertically separated rather than indented.\n"
"\n"
-"date: 2010-07-14 06:54:32 +0000"
+"date: 2012-06-08 15:19:18 +0000"
msgstr ""
-#. description(texlive-pictexsum)
-msgid ""
-"The document summarises the commands of PicTeX. While it is no substitute for the PicTeX manual itself (available from Personal TeX inc.), the document is a useful aide-memoire for those who have read the manual.\n"
-"\n"
-"date: 2006-08-27 15:41:02 +0000"
+#. summary(texlive-specs-r:texlive-plari-doc)
+#, fuzzy
+msgid "Documentation for texlive-plari"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-plari-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-plari"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-plates)
+msgid "Arrange for \"plates\" sections of documents"
msgstr ""
-#. description(texlive-webguide)
+#. description(texlive-specs-r:texlive-plates)
msgid ""
-"The documentation constitutes an example of the package's own recommendations (being presented both in PDF and HTML).\n"
+"The plates package provides a simple facility for inserting colour figures in a document when they should be gathered and printed together as in a book's section of colour plates. The package provides a plate environment that takes the place of the figure environment for such colour images.\n"
"\n"
-"date: 2011-06-16 19:20:53 +0000"
+"date: 2012-06-08 15:19:18 +0000"
msgstr ""
-#. description(texlive-midpage)
+#. summary(texlive-specs-r:texlive-plates-doc)
+#, fuzzy
+msgid "Documentation for texlive-plates"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-plates-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-plates"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-play)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset drama using LaTeX"
+msgstr "Zpracování XML pomocí TeXu"
+
+#. description(texlive-specs-r:texlive-play)
msgid ""
-"The environment will centre text, if immediately preceded and followed by \\clearpage.\n"
+"A class and style file that supports the typesetting of plays, including options for line numbering.\n"
"\n"
-"date: 2010-03-17 11:20:59 +0000"
+"date: 2012-05-31 16:08:53 +0000"
msgstr ""
-#. description(texlive-latex-tabellen)
-msgid ""
-"The examples from the book <<Tabellen mit LaTeX>>, 2nd ed.\n"
-"\n"
-"date: 2010-02-12 12:59:30 +0000"
+#. summary(texlive-specs-r:texlive-play-doc)
+#, fuzzy
+msgid "Documentation for texlive-play"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-play-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-play"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-playfair)
+msgid "Playfair Display fonts with LaTeX support"
msgstr ""
-#. description(texlive-kpfonts)
+#. description(texlive-specs-r:texlive-playfair)
msgid ""
-"The family contains text fonts in roman, sans-serif and monospaced shapes, with true small caps and old-style numbers; the package offers full support of the textcomp package. The mathematics fonts include all the AMS fonts, in both normal and bold weights. Each of the font types is available in two main versions: default and 'light'. Each version is available in four variants: default; oldstyle numbers; oldstyle numbers with old ligatures such as ct and st, and long-tailed capital Q; and veryoldstyle with long s. Other variants include small caps as default or 'large small caps', and for mathematics both upright and slanted shapes for Greek letters, as well as default and narrow versions of multiple integrals. The fonts were originally derived from URW Palladio (with URW's agreement) though the fonts are very clearly different in appearance from their parent.\n"
+"Playfair Display is well suited for titling and headlines. It has an extra large x-height and short descenders. It can be set with no leading if space is tight, for instance in news headlines, or for stylistic effect in titles. Capitals are extra short, and only very slightly heavier than the lowercase characters. This helps achieve a more even typographical colour when typesetting proper nouns and initialisms.\n"
"\n"
-"date: 2012-07-05 13:28:28 +0000"
+"date: 2014-05-23 15:11:55 +0000"
msgstr ""
-#. description(texlive-vak)
-msgid ""
-"The file can be used to format the bibliographies of PhD theses, books etc., according to the latest Russian standards: GOST 7.82 - 2001 and GOST 7.1 - 2003. It introduces the minimum number of new entries and styles to cover all frequently used situations. The style file provides an easy way to perform a semiautomatic, or a completely manual sort of the list of the references. Processing bibliographies produced by the style requires a 8-bit BibTeX system.\n"
-"\n"
-"date: 2011-07-04 14:33:07 +0000"
+#. summary(texlive-specs-r:texlive-playfair-doc)
+#, fuzzy
+msgid "Documentation for texlive-playfair"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-playfair-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-playfair"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-playfair-fonts)
+#, fuzzy
+msgid "Severed fonts for texlive-playfair"
+msgstr "Vývojářský balík pro libstroke"
+
+#. description(texlive-specs-r:texlive-playfair-fonts)
+#, fuzzy
+msgid "The separated fonts package for texlive-playfair"
+msgstr "Vývojářský balík pro libstroke"
+
+#. summary(texlive-specs-r:texlive-plipsum)
+msgid "'Lorem ipsum' for Plain TeX developers"
msgstr ""
-#. description(texlive-pdftex-def)
+#. description(texlive-specs-r:texlive-plipsum)
msgid ""
-"The file pdftex.def provides device-specific definitions for colour and graphics support when running pdf(La)TeX.\n"
+"The package provides a paragraph generator designed for use in Plain TeX documents. The paragraphs generated contain many 'f- groups' (ff, fl etc.) so the text can act as a test of the ligatures of the font in use.\n"
"\n"
-"date: 2011-05-28 09:53:45 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xetex-def)
-msgid ""
-"The file xetex.def provides device-specific definitions for colour and graphics support when running Xe(La)TeX\n"
-"\n"
-"date: 2013-02-20 10:06:23 +0000"
+#. summary(texlive-specs-r:texlive-plipsum-doc)
+msgid "Documentation for texlive-plipsum"
msgstr ""
-#. description(texlive-rotfloat)
-msgid ""
-"The float package provides commands to define new floats of various styles (plain, boxed, ruled, and userdefined ones); the rotating package provides new environments (sidewaysfigure and sidewaystable) which are rotated by 90 or 270 degrees. But what about new rotated floats, e.g. a rotated ruled one? This package makes this possible; it builds a bridge between the two packages and extends the commands from the float package to define rotated versions of the new floats, too.\n"
-"\n"
-"date: 2009-10-07 20:25:55 +0000"
+#. description(texlive-specs-r:texlive-plipsum-doc)
+msgid "This package includes the documentation for texlive-plipsum"
msgstr ""
-#. description(texlive-skull)
+#. summary(texlive-specs-r:texlive-plnfss)
+#, fuzzy
+msgid "Font selection for Plain TeX"
+msgstr "Software pro certifikaci CD"
+
+#. description(texlive-specs-r:texlive-plnfss)
msgid ""
-"The font (defined in Metafont) defines a single character, a black solid skull. A package is supplied to make this character available as a symbol in maths mode.\n"
+"Plnfss is a set of macros to provide easy font access (somewhat similar to NFSS but with some limitations) with Plain TeX. Plnfss can automatically make use of PSNFSS fd files, i.e., when an Adobe Type 1 is used the relevant fd file will be loaded automatically. For cmr-like fonts (ec, vnr, csr or plr fonts), a special format called pfd (plain fd) is required and must be loaded manually. See ot1cmr.pfd for further information.\n"
"\n"
-"date: 2011-04-11 20:34:22 +0000"
+"date: 2012-06-08 15:19:18 +0000"
msgstr ""
-#. description(texlive-orkhun)
-msgid ""
-"The font covers an old Turkic script. It is provided as MetaFont source.\n"
-"\n"
-"date: 2009-04-22 09:33:20 +0000"
+#. summary(texlive-specs-r:texlive-plnfss-doc)
+#, fuzzy
+msgid "Documentation for texlive-plnfss"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-plnfss-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-plnfss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-plstmary)
+msgid "St. Mary's Road font support for plain TeX"
msgstr ""
-#. description(texlive-sourcecodepro)
+#. description(texlive-specs-r:texlive-plstmary)
msgid ""
-"The font is an open-source Monospaced development from Adobe. The package provides fonts (in both Adobe Type 1 and OpenType formats) and macros supporting their use in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF).\n"
+"The package provides commands to produce all the symbols of the St Mary's Road fonts, in a Plain TeX environment.\n"
"\n"
-"date: 2013-01-17 12:28:12 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-sourcesanspro)
-msgid ""
-"The font is an open-source Sans-Serif development from Adobe. The package provides fonts (in both Adobe Type 1 and OpenType formats) and macros supporting their use in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF).\n"
-"\n"
-"date: 2013-05-02 18:50:09 +0000"
+#. summary(texlive-specs-r:texlive-plstmary-doc)
+msgid "Documentation for texlive-plstmary"
msgstr ""
-#. description(texlive-ogham)
-msgid ""
-"The font provides the Ogham alphabet, which is found on a number of Irish and Pictish carvings dating from the 4th century AD. The font is distributed as Metafont source, which has been patched (with the author's permission) for stability at different output device resolutions. (Thanks are due to Peter Flynn and Dan Luecking.)\n"
-"\n"
-"date: 2011-12-19 11:56:45 +0000"
+#. description(texlive-specs-r:texlive-plstmary-doc)
+msgid "This package includes the documentation for texlive-plstmary"
msgstr ""
-#. description(texlive-punknova)
-msgid ""
-"The font was generated from a MetaPost version of the sources of the 'original' punk font. Knuth's original fonts generated different shapes at random. This isn't actually possible in an OpenType font; rather, the font contains several variants of each glyph, and uses the OpenType randomize function to select a variant for each invocation.\n"
-"\n"
-"date: 2011-11-23 10:34:47 +0000"
+#. summary(texlive-specs-r:texlive-plweb)
+msgid "Literate Programming for Prolog with LaTeX"
msgstr ""
-#. description(texlive-phonetic)
+#. description(texlive-specs-r:texlive-plweb)
msgid ""
-"The fonts are based on Computer Modern, and specified in MetaFont. Macros for the fonts' use are provided, both for LaTeX 2.09 and for current LaTeX.\n"
+"Instead of having to transform the common source into program or documentation, the central idea was to develop a method to have one common source which can be interpreted by a Prolog system as well as by LaTeX, whether that Prolog system be C- Prolog, Quintus-Prolog, or ECLiPSe.\n"
"\n"
-"date: 2011-03-28 20:21:58 +0000"
+"date: 2012-06-08 15:19:18 +0000"
msgstr ""
-#. description(texlive-ipaex)
-msgid ""
-"The fonts provide fixed-width glyphs for Kana and Kanji characters, proportional width glyphs for Western characters.\n"
-"\n"
-"date: 2011-11-03 08:19:42 +0000"
+#. summary(texlive-specs-r:texlive-plweb-doc)
+#, fuzzy
+msgid "Documentation for texlive-plweb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-plweb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-plweb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pmgraph)
+msgid "\"Poor man's\" graphics"
msgstr ""
-#. description(texlive-rsfs)
+#. description(texlive-specs-r:texlive-pmgraph)
msgid ""
-"The fonts provide uppercase 'formal' script letters for use as symbols in scientific and mathematical typesetting (in contrast to the informal script fonts such as that used for the 'calligraphic' symbols in the TeX maths symbol font). The fonts are provided as MetaFont source, and as derived Adobe Type 1 format. LaTeX support, for using these fonts in mathematics, is available via one of the packages calrsfs and mathrsfs.\n"
+"A set of extensions to LaTeX picture environment, including a wider range of vectors, and a lot more box frame styles.\n"
"\n"
-"date: 2008-12-14 18:11:27 +0000"
+"date: 2012-07-19 12:50:35 +0000"
msgstr ""
-#. description(texlive-stmaryrd)
-msgid ""
-"The fonts were originally distributed as MetaFont sources only, but Adobe Type 1 versions are also now available. Macro support is provided for use under LaTeX; the package supports the \"only\" option (provided by the somedefs package) to restrict what is loaded, for those who don't need the whole font.\n"
-"\n"
-"date: 2009-10-09 22:51:28 +0000"
+#. summary(texlive-specs-r:texlive-pmgraph-doc)
+#, fuzzy
+msgid "Documentation for texlive-pmgraph"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-r:texlive-pmgraph-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pmgraph"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pmx)
+msgid "Preprocessor for MusiXTeX"
msgstr ""
-#. description(texlive-tikz-cd)
+#. description(texlive-specs-r:texlive-pmx)
msgid ""
-"The general-purpose drawing package TiKZ can be used to typeset commutative diagrams and other kinds of mathematical pictures, generating high-quality results. The purpose of this package is to make the process of creation of such diagrams easier by providing a convenient set of macros and reasonable default settings. This package also includes an arrow tip library that match closely the arrows present in the Computer Modern typeface.\n"
+"PMX is a preprocessor for MusiXTeX. It builds the TeX input file from a file in a much simpler language, making most of the layout decisions by itself. An auxiliary program makes single- player parts from a multi-player score. For proof-listening, PMX can make a MIDI file of your score. The present version requires at least version 1.15 of MusiXTeX, running on an e- tex-enhanced TeX system.\n"
"\n"
-"date: 2013-01-02 17:01:12 +0000"
+"date: 2013-12-16 10:52:21 +0000"
msgstr ""
-#. description(texlive-savetrees)
-msgid ""
-"The goal of the savetrees package is to pack as much text as possible onto each page of a LaTeX document. Admittedly, this makes the document far less attractive. Nevertheless, savetrees is a simple way to save paper when printing draft copies of a document. It can also be useful when trying to meet a tight page-length requirement for a conference or journal submission.\n"
-"\n"
-"date: 2013-04-10 05:27:56 +0000"
+#. summary(texlive-specs-r:texlive-pmx-doc)
+msgid "Documentation for texlive-pmx"
msgstr ""
-#. summary(tomcat:tomcat-admin-webapps)
-msgid "The host-manager and manager web applications for Apache Tomcat"
+#. description(texlive-specs-r:texlive-pmx-doc)
+msgid "This package includes the documentation for texlive-pmx"
msgstr ""
-#. description(tomcat:tomcat-admin-webapps)
-msgid "The host-manager and manager web applications for Apache Tomcat."
+#. summary(texlive-specs-r:texlive-pmxchords)
+msgid "Produce chord information to go with pmx output"
msgstr ""
-#. description(vim-plugins:vim-plugin-zoomwin)
+#. description(texlive-specs-r:texlive-pmxchords)
msgid ""
-"The idea is to make it easy to zoom into and out of a window. Usage:\n"
+"The bundle supplements pmx, providing the means of typesetting chords above the notes of a score. The bundle contains: macros for typing the chords; a Lua script to transpose chord macros to the required key signature; and support scripts for common requirements.\n"
"\n"
-" Press <c-w>o : the current window zooms into a full screen Press <c-w>o again: the previous set of windows is restored"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-idxlayout)
+#. summary(texlive-specs-r:texlive-pmxchords-doc)
+#, fuzzy
+msgid "Documentation for texlive-pmxchords"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pmxchords-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pmxchords"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pnas2009)
+#, fuzzy
+msgid "Bibtex style for PNAS"
+msgstr "Styl Thin Keramik pro KDE"
+
+#. description(texlive-specs-r:texlive-pnas2009)
msgid ""
-"The idxlayout package offers a key-value interface to configure index layout parameters, e.g. allowing for three-column indexes or for \"parent\" items and their affiliated subitems being typeset as a single paragraph. The package is responsive to the index-related options and commands of the KOMA-Script and memoir classes.\n"
+"This style produces bibliographies in the format of \"Proceedings of the National Academy of Sciences, USA\". The style was derived from the standard unsrt.bst and adapted to the new (2009) formatting rules.\n"
"\n"
-"date: 2012-04-01 18:39:12 +0000"
+"date: 2012-04-10 14:50:57 +0000"
msgstr ""
-#. description(texlive-ifmtarg)
+#. summary(texlive-specs-r:texlive-poemscol)
+msgid "Typesetting Critical Editions of Poetry"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-poemscol)
msgid ""
-"The ifmtarg package\n"
+"The package offers LaTeX macros for typesetting critical editions of poetry. Its features include automatic linenumbering, generation of separate endnotes sections for emendations, textual collations, and explanatory notes, special marking for cases in which page breaks occur during stanza breaks, running headers of the form 'Notes to pp. xx-yy' for the notes sections, index of titles and first lines, and automatic generation of a table of contents.\n"
"\n"
-"date: 2010-07-10 14:47:23 +0000"
+"date: 2013-08-03 06:19:55 +0000"
msgstr ""
-#. description(texlive-ifoddpage)
-msgid "The ifoddpage package"
+#. summary(texlive-specs-r:texlive-poemscol-doc)
+#, fuzzy
+msgid "Documentation for texlive-poemscol"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-poemscol-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-poemscol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-poetrytex)
+msgid "Typeset anthologies of poetry"
msgstr ""
-#. description(texlive-insbox)
+#. description(texlive-specs-r:texlive-poetrytex)
msgid ""
-"The insbox package\n"
+"The package is designed to aid in the management and formatting of anthologies of poetry and other writings; it does not concern itself with actually typesettinig the verse itself.\n"
"\n"
-"date: 2007-01-07 14:47:33 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-isodoc)
-msgid ""
-"The isodoc class can be used for the preparation of letters and invoices (and, in the future, similar documents). Documents are set up with options, thus making the class easily adaptable to user's wishes and extensible for other document types. The class is based on Victor Eijkhout's NTG brief class, which implements the NEN1026 standard.\n"
-"\n"
-"date: 2012-09-29 12:32:13 +0000"
+#. summary(texlive-specs-r:texlive-poetrytex-doc)
+msgid "Documentation for texlive-poetrytex"
msgstr ""
-#. description(texlive-isorot)
-msgid ""
-"The isorot package is for rotation of document elements. It is a combination of the lscape package and an extension of the rotating package. The package is designed for use with the iso class but may be used with any normal class.\n"
-"\n"
-"date: 2007-01-08 12:31:52 +0000"
+#. description(texlive-specs-r:texlive-poetrytex-doc)
+msgid "This package includes the documentation for texlive-poetrytex"
msgstr ""
-#. description(texlive-jmlr)
+#. summary(texlive-specs-r:texlive-polski)
+msgid "Typeset Polish documents with LaTeX and Polish fonts"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-polski)
msgid ""
-"The jmlr bundle provides a class for authors (jmlr) and a class for production editors (jmlrbook), as well as a script makejmlrbook The jmlrbook class may can be used to combine articles written using the jmlr class into a book. The class uses the combine class and the hyperref package to produce either a colour hyperlinked book for on-line viewing or a greyscale nonhyperlinked book for printing. The makejmlrbook Perl script can be used to create the colour hyperlinked and greyscale nonhyperlinked PDFs of a document using the jmlrbook class. It can also create a set of HTML files that list the included papers with links to their abstracts and the individual articles as PDFs.\n"
+"Tools to typeset documents in Polish using LaTeX2e with Polish fonts (the so-called PL fonts), EC fonts or CM fonts. (This package was previously known as platex, but has been renamed to resolve a name clash.)\n"
"\n"
-"date: 2012-05-30 14:45:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-jmn)
+#. summary(texlive-specs-r:texlive-polski-doc)
#, fuzzy
-msgid "The jmn package"
-msgstr "Balíčky pro vývoj KDE"
+msgid "Documentation for texlive-polski"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-jpsj)
+#. description(texlive-specs-r:texlive-polski-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-polski"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-poltawski)
+msgid "Antykwa Poltawskiego Family of Fonts"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-poltawski)
msgid ""
-"The jpsj package\n"
+"The package contains the Antykwa Poltawskiego family of fonts in the PostScript Type 1 and OpenType formats. The original font was designed in the twenties of the XX century by the Polish typographer Adam Poltawski(1881-1952). Following the route set out by the Latin Modern and TeX Gyre projects (http://www.gust.org.pl/projects/e-foundry), the Antykwa Poltawskiego digitisation project aims at providing a rich collection of diacritical characters in the attempt to cover as many Latin-based scripts as possible. To our knowledge, the repertoire of characters covers all European languages as well as some other Latin-based alphabets such as Vietnamese and Navajo; at the request of users, recent extensions (following the enhancement of the Latin Modern collection) provide glyphs sufficient for typesetting of romanized transliterations of Arabic and Sanskrit scripts. The Antykwa Poltawskiego family consists of 4 weights (light, normal, medium, bold), each having upright and italic forms a
nd one of 5 design sizes: 6, 8, 10, 12 and 17pt. Altogether, the collection comprises 40 font files, containing the same repertoire of 1126 characters. The preliminary version of Antykwa Poltawskiego (antp package) released in 2000 is rendered obsolete by this package.\n"
"\n"
-"date: 2007-03-14 07:57:39 +0000"
+"date: 2014-05-23 15:08:48 +0000"
msgstr ""
-#. description(texlive-kastrup)
-msgid "The kastrup package"
+#. summary(texlive-specs-r:texlive-poltawski-doc)
+#, fuzzy
+msgid "Documentation for texlive-poltawski"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-poltawski-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-poltawski"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-poltawski-fonts)
+msgid "Severed fonts for texlive-poltawski"
msgstr ""
-#. description(texlive-kluwer)
-msgid "The kluwer package"
+#. description(texlive-specs-r:texlive-poltawski-fonts)
+msgid "The separated fonts package for texlive-poltawski"
msgstr ""
-#. description(texlive-knuthotherfonts)
-#, fuzzy
-#| msgid "TrueType fonts from the GNU intlfonts package."
-msgid "The knuthotherfonts package"
-msgstr "TrueType písma z balíku GNU intlfonts."
-
-#. description(texlive-ksfh_nat)
-msgid "The ksfh_nat package"
+#. summary(texlive-specs-r:texlive-polyglossia)
+msgid "Modern multilingual typesetting with XeLaTeX"
msgstr ""
-#. description(texlive-l3experimental)
+#. description(texlive-specs-r:texlive-polyglossia)
msgid ""
-"The l3experimental packages are a collection of experimental implementations for aspects of the LaTeX3 kernel, dealing with higher-level ideas such as the Designer Interface. Some of them work as stand alone packages, providing new functionality, and can be used on top of LaTeX2e with no changes to the existing kernel. The present release includes: - xgalley, which controls boxes receiving text for typesetting. - l3dt: kernel support for data tables; - l3galley: kernel support for xgalley; - l3regex: kernel support for regular expression search and replace operations; - l3sort: kernel support for sorting sequences, token lists or comma-lists, according to user- specified comparison criteria; - l3str: kernel support for string manipulation; - l3tl-build: kernel support for token list building; - l3tl_analysis: kernel support for token list analysis; and - xcoffins, which allows the alignment of boxes using a series of 'handle' positions, supplementing the simple TeX reference point.
All the files of the bundle are also available in the Subversion (SVN) repository of the LaTeX3 Project. The bundle on CTAN is based on a snapshot of the SVN repository on 2012-11-21.\n"
+"This package provides a complete Babel replacement for users of LuaLaTeX and XeLaTeX; it relies on the fontspec package, version 2.0 at least. This is the first release that supports use with LuaLaTeX; it should be considered \"transitional\" in that role.\n"
"\n"
-"date: 2013-03-12 09:55:10 +0000"
+"date: 2014-05-21 23:04:51 +0000"
msgstr ""
-#. description(texlive-l3kernel)
+#. summary(texlive-specs-r:texlive-polyglossia-doc)
+#, fuzzy
+msgid "Documentation for texlive-polyglossia"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-polyglossia-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-polyglossia"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-polynom)
+#, fuzzy
+msgid "Macros for manipulating polynomials"
+msgstr "Knihovna pro práci s ID3v1 a ID3v2 tagy"
+
+#. description(texlive-specs-r:texlive-polynom)
msgid ""
-"The l3kernel bundle provides an implementation of the LaTeX3 programmers' interface, as a set of packages that run under LaTeX 2e. The interface provides the foundation on which the LaTeX3 kernel and other future code are built: it is an API for TeX programmers. The packages are set up so that the LaTeX3 conventions can be used with regular LaTeX 2e packages. All the files of the bundle are also available in the Subversion (SVN) repository of the LaTeX3 Project. The bundle on CTAN is based on a snapshot of the SVN repository on 2012-11-21.\n"
+"The polynom package implements macros for manipulating polynomials, for example it can typeset long polynomial divisions. The main test case and application is the polynomial ring in one variable with rational coefficients.\n"
"\n"
-"date: 2013-03-14 20:55:57 +0000"
+"date: 2012-04-10 15:31:04 +0000"
msgstr ""
-#. description(texlive-lambda)
-msgid "The lambda package"
-msgstr ""
+#. summary(texlive-specs-r:texlive-polynom-doc)
+#, fuzzy
+msgid "Documentation for texlive-polynom"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-langcode)
+#. description(texlive-specs-r:texlive-polynom-doc)
#, fuzzy
-#| msgid "Extra packages"
-msgid "The langcode package"
-msgstr "Dodatečné balíčky"
+msgid "This package includes the documentation for texlive-polynom"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-latex-bin)
-msgid "The latex-bin package"
+#. summary(texlive-specs-r:texlive-polynomial)
+msgid "Typeset (univariate) polynomials"
msgstr ""
-#. description(texlive-latex2e-help-texinfo-spanish)
-msgid "The latex2e-help-texinfo-spanish package"
+#. description(texlive-specs-r:texlive-polynomial)
+msgid ""
+"The package offers an easy way to write (univariate) polynomials and rational functions. It defines two commands, one for polynomials \\polynomial{coeffs} and one for rational functions \\polynomialfrac{Numerator}{Denominator}. Both commands take lists of coefficients as arguments, and offer limited optional behaviour.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-latex4wp-it)
-msgid "The latex4wp-it package"
-msgstr ""
+#. summary(texlive-specs-r:texlive-polynomial-doc)
+#, fuzzy
+msgid "Documentation for texlive-polynomial"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-latexconfig)
-msgid "The latexconfig package"
-msgstr ""
+#. description(texlive-specs-r:texlive-polynomial-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-polynomial"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-recipe)
-msgid ""
-"The layout design is relative straightforward (and traditional: see 'sample output' under 'documentation'); the class needs access to Bookman, and to BrushScript-Italic fonts.\n"
-"\n"
-"date: 2008-09-11 13:08:12 +0000"
+#. summary(texlive-specs-r:texlive-polytable)
+msgid "Tabular-like environments with named columns"
msgstr ""
-#. description(texlive-lcg)
+#. description(texlive-specs-r:texlive-polytable)
msgid ""
-"The lcg package generates random numbers (integers) via a linear congruential generator (Schrage's method). The random numbers are written to a counter. The keyval package is used to set values for the range, a seed, and the name of the counter.\n"
+"This package implements a variant of tabular-like environments where columns can be given a name and entries can flexibly be placed between arbitrary columns. Complex alignment-based layouts, for example for program code, are possible.\n"
"\n"
-"date: 2008-09-10 20:47:41 +0000"
+"date: 2012-05-30 22:57:47 +0000"
msgstr ""
-#. description(texlive-leipzig)
+#. summary(texlive-specs-r:texlive-polytable-doc)
#, fuzzy
-msgid "The leipzig package"
-msgstr "dosutils CD dir - interní balíček."
+msgid "Documentation for texlive-polytable"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lettrine)
-msgid ""
-"The lettrine package supports various dropped capitals styles, typically those described in the French typographic books. In particular, it has facilities for the paragraph text's left edge to follow the outline of capitals that have a regular shape (such as \"A\" and \"V\").\n"
-"\n"
-"date: 2013-03-14 16:29:15 +0000"
+#. description(texlive-specs-r:texlive-polytable-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-polytable"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-postcards)
+msgid "Facilitates mass-mailing of postcards (junkmail)"
msgstr ""
-#. description(texlive-lexikon)
+#. description(texlive-specs-r:texlive-postcards)
msgid ""
-"The lexikon package\n"
+"A modification of the standard LaTeX letter class which prints multiple, pre-stamped, 5.5\" by 3.5\" postcards (a US standard size) via the envlab and mailing packages. An address database is employed to address the front side of each postcard and a message is printed on the back side of all. An illustrative example is provided.\n"
"\n"
-"date: 2010-03-06 20:34:04 +0000"
+"date: 2012-05-30 18:28:00 +0000"
msgstr ""
-#. description(texlive-linearA)
-msgid ""
-"The linearA package provides a simple interface to two fonts which include all known symbols, simple and complex, of the Linear A script. This way one can easily replicate Linear A \"texts\" using modern typographic technology. Note that the Linear A script has not been deciphered yet and probably never will be deciphered.\n"
-"\n"
-"date: 2006-12-01 15:33:32 +0000"
+#. summary(texlive-specs-r:texlive-postcards-doc)
+#, fuzzy
+msgid "Documentation for texlive-postcards"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-postcards-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-postcards"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-poster-mac)
+msgid "Make posters and banners with TeX"
msgstr ""
-#. description(texlive-linegoal)
+#. description(texlive-specs-r:texlive-poster-mac)
msgid ""
-"The linegoal package provides a macro \\linegoal to be used with \\setlength: \\setlength<some dimen>\\linegoal will set <some dimen> to the horizontal length of the remainder of the line. This is achieved using the \\pdfsavepos primitive of pdftex, through the zref-savepos package. Example: Some text: \\begin{tabularx}\\linegoal{|l|X|} \\hline one & two \\\\ three & four \\\\\\hline \\end{tabularx} will position the table after the initial text, and make the table fill the rest of the line.\n"
+"The package offers macros for making posters and banners with TeX. It is compatible with most TeX macro formats, including Plain TeX, LaTeX, AmSTeX, and AmS-LaTeX. The package creates a poster as huge box, which is then distributed over as many printer pages as necessary. The only special requirement is that your printer not be bothered by text that lies off the page. This is true of most printers, including laser printers and PostScript printers.\n"
"\n"
-"date: 2011-02-25 19:25:45 +0000"
+"date: 2012-03-31 20:28:21 +0000"
msgstr ""
-#. description(texlive-listing)
-msgid ""
-"The listing environment is provided and is similar to figure and table, although it is not a floating environment. Includes support for \\caption, \\label, \\ref, and introduces \\listoflistings, \\listingname, \\listlistingname. It produces a .lol file. It does not change \\@makecaption (unless the option bigcaptions is used), so packages that change the layout of \\caption still work.\n"
-"\n"
-"date: 2010-03-09 12:13:30 +0000"
+#. summary(texlive-specs-r:texlive-poster-mac-doc)
+#, fuzzy
+msgid "Documentation for texlive-poster-mac"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-poster-mac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-poster-mac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-powerdot)
+msgid "A presentation class"
msgstr ""
-#. description(texlive-listliketab)
+#. description(texlive-specs-r:texlive-powerdot)
msgid ""
-"The listliketab package helps the user make list-like tabulars, i.e., a tabular that is indistinguishable from an itemize or enumerate environment. The advantage of using a tabular is that the user can add additional columns to each entry in the list.\n"
+"Powerdot is a presentation class for LaTeX that allows for the quick and easy development of professional presentations. It comes with many tools that enhance presentations and aid the presenter. Examples are automatic overlays, personal notes and a handout mode. To view a presentation, DVI, PS or PDF output can be used. A powerful template system is available to easily develop new styles. A LyX layout file is provided.\n"
"\n"
-"date: 2006-12-08 19:57:43 +0000"
+"date: 2014-01-02 06:32:11 +0000"
msgstr ""
-#. description(texlive-logpap)
-msgid ""
-"The logpap package provides four macros for drawing logarithmic-logarithmic, logarithmic-linear, linear-logarithmic and (because it was easy to implement) linear-linear graph paper with LaTeX.\n"
-"\n"
-"date: 2006-12-08 21:20:56 +0000"
+#. summary(texlive-specs-r:texlive-powerdot-FUBerlin)
+msgid "Powerdot, using the style of FU Berlin"
msgstr ""
-#. description(texlive-lshort-german)
+#. description(texlive-specs-r:texlive-powerdot-FUBerlin)
msgid ""
-"The lshort-german package\n"
+"The bundle provides a powerdot-derived class and a package for use with powerdot to provide the corporate design of the Free University in Berlin. Users may use the class itself (FUpowerdot) or use the package in the usual way with \\style=BerlinFU as a class option. Examples of using both the class and the package are provided; the PDF is visually identical, so the catalogue only lists one; the sources of the examples do of course differ.\n"
"\n"
-"date: 2012-11-15 12:07:37 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lshort-japanese)
-msgid ""
-"The lshort-japanese package\n"
-"\n"
-"date: 2006-12-27 23:06:45 +0000"
+#. summary(texlive-specs-r:texlive-powerdot-FUBerlin-doc)
+#, fuzzy
+msgid "Documentation for texlive-powerdot-FUBerlin"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-powerdot-FUBerlin-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-powerdot-FUBerlin"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-powerdot-doc)
+#, fuzzy
+msgid "Documentation for texlive-powerdot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-powerdot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-powerdot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-ppr-prv)
+msgid "Prosper preview"
msgstr ""
-#. description(texlive-ltxmisc)
+#. description(texlive-specs-r:texlive-ppr-prv)
msgid ""
-"The ltxmisc package\n"
+"This class is used with LaTeX presentations using the prosper class. ppr-prv stands for 'Prosper Preview'. The aim of this class is to produce a printable version of the slides written with Prosper, with two slides per page.\n"
"\n"
-"date: 2009-01-16 14:12:56 +0000"
+"date: 2012-05-30 22:57:47 +0000"
msgstr ""
-#. description(texlive-luabidi)
+#. summary(texlive-specs-r:texlive-ppr-prv-doc)
#, fuzzy
-#| msgid "Extra packages"
-msgid "The luabidi package"
-msgstr "Dodatečné balíčky"
+msgid "Documentation for texlive-ppr-prv"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xyling)
-msgid ""
-"The macros in this package model the construction of linguistic tree structures as a genuinely graphical problem: they contain two types of objects, BRANCHES and NODE LABELS, and these are positioned relative to a GRID. It is essential that each of these three elements is constructed independent of the other two, and hence they can be modified without unwanted side effects. The macros are based on the xy-pic package.\n"
-"\n"
-"date: 2007-03-13 08:23:19 +0000"
+#. description(texlive-specs-r:texlive-ppr-prv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ppr-prv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pracjourn)
+msgid "Typeset articles for PracTeX"
msgstr ""
-#. description(texlive-program)
+#. description(texlive-specs-r:texlive-pracjourn)
msgid ""
-"The main offering is a program environment; a programbox environment is available for fragments that must not break with the pages.\n"
+"The pracjourn class is used for typesetting articles in the PracTeX Journal. It is based on the article class with modifications to allow for more flexible front-matter and revision control, among other small changes.\n"
"\n"
-"date: 2010-10-07 10:36:42 +0000"
+"date: 2012-04-01 09:28:19 +0000"
msgstr ""
-#. description(texlive-makedtx)
-msgid ""
-"The makedtx bundle is provided to help LaTeX2e developers to write the code and documentation in separate files, and then combine them into a single .dtx file for distribution. It automatically generates the character table, and also writes the associated installation (.ins) script.\n"
-"\n"
-"date: 2007-10-18 14:19:02 +0000"
+#. summary(texlive-specs-r:texlive-pracjourn-doc)
+#, fuzzy
+msgid "Documentation for texlive-pracjourn"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-r:texlive-pracjourn-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pracjourn"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-preprint)
+msgid "A bundle of packages provided \"as is\""
msgstr ""
-#. description(texlive-latex2e-help-texinfo)
+#. description(texlive-specs-r:texlive-preprint)
msgid ""
-"The manual is provided as Texinfo source (which was originally derived from the VMS help file in the DECUS TeX distribution of 1990, with many subsequent changes). This is a collaborative development, and details of getting involved are to be found on the package home page. All the other formats in the distribution are derived from the Texinfo source, as usual.\n"
+"The bundle comprises: authblk, which permits footnote style author/affiliation input in the \\author command, balance, to balance the end of \\twocolumn pages, figcaps, to send figure captions, etc., to end document, fullpage, to set narrow page margins and set a fixed page style, and sublabel, which permits counters to be subnumbered.\n"
"\n"
-"date: 2013-05-14 21:18:47 +0000"
+"date: 2013-12-03 17:48:45 +0000"
msgstr ""
-#. description(texlive-mathspec)
-msgid ""
-"The mathspec package provides an interface to typeset mathematics in XeLaTeX with arbitrary text fonts using fontspec as a backend. The package is under development and later versions might to be incompatible with this version, as this version is incompatible with earlier versions. The package requires at least version 0.9995 of XeTeX.\n"
-"\n"
-"date: 2009-09-30 18:39:21 +0000"
+#. summary(texlive-specs-r:texlive-preprint-doc)
+#, fuzzy
+msgid "Documentation for texlive-preprint"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-preprint-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-preprint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-prerex)
+msgid "Interactive editor and macro support for prerequisite charts"
msgstr ""
-#. description(texlive-mattens)
+#. description(texlive-specs-r:texlive-prerex)
msgid ""
-"The mattens package contains the definitions to typeset matrices, vectors and tensors as used in the engineering community for the representation of common vectors and tensors such as forces, velocities, moments of inertia, etc.\n"
+"This package consists of prerex.sty, a LaTeX package for producing charts of course nodes linked by arrows representing pre- and co-requisites, and prerex, an interactive program for creating and editing chart descriptions. The implementation of prerex.sty uses PGF, so that it may be used equally happily with latex or pdflatex; prerex itself is written in C. The package includes source code for a previewer application, a lightweight Qt-4 and poppler-based prerex-enabled PDF viewer.\n"
"\n"
-"date: 2009-11-09 22:10:10 +0000"
+"date: 2014-04-23 05:43:02 +0000"
msgstr ""
-#. description(texlive-mcaption)
+#. summary(texlive-specs-r:texlive-prerex-doc)
+#, fuzzy
+msgid "Documentation for texlive-prerex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-prerex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-prerex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-present)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Presentations with Plain TeX"
+msgstr "Zpracování XML pomocí TeXu"
+
+#. description(texlive-specs-r:texlive-present)
msgid ""
-"The mcaption package provides an mcaption environment which puts figure or table captions in the margin. The package works with the standard classes and with the KOMA-Script document classes scrartcl, scrreprt and scrbook. The package requires the changepage package.\n"
+"The package offers a collection of simple macros for preparing presentations in Plain TeX. Slide colour and text colour may be set, links between parts of the presentation, to other files, and to web addresses may be inserted. Images may be included easily, and code is available to provide transition effects between slides or frames. The structure of the macros is not overly complex, so that users should find it easy to adapt the macros to their specific needs.\n"
"\n"
-"date: 2009-03-14 01:18:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mcite)
-msgid ""
-"The mcite package allows the user to collapse multiple citations into one, as is customary in physics journals. The package requires a customised BibTeX style for its work; the documentation explains how to do that customisation.\n"
-"\n"
-"date: 2007-01-09 21:36:10 +0000"
+#. summary(texlive-specs-r:texlive-present-doc)
+#, fuzzy
+msgid "Documentation for texlive-present"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-present-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-present"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-presentations)
+msgid "Examples from the book Presentationen mit LaTeX"
msgstr ""
-#. description(texlive-mciteplus)
+#. description(texlive-specs-r:texlive-presentations)
msgid ""
-"The mciteplus LaTeX package is an enhanced reimplementation of Thorsten Ohl's mcite package which provides support for the grouping of multiple citations together as is often done in physics journals. An extensive set of features provide for other applications such as reference sublisting.\n"
+"This bundle contains all the examples, as source, eps and pdf, of the author's book \"Presentationen mit LaTeX\", from the Dante-Edition series.\n"
"\n"
-"date: 2008-09-30 14:07:39 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-memoir)
-msgid ""
-"The memoir class is for typesetting poetry, fiction, non- fiction, and mathematical works. Permissible document 'base' font sizes range from 9 to 60pt. There is a range of page- styles and well over a dozen chapter-styles to choose from, as well as methods for specifying your own layouts and designs. The class also provides the functionality of over thirty of the more popular packages, thus simplifying document sources. The class automatically loads an associated patch file mempatch; the patch file may be updated from time to time, between releases of the class itself. (The patch file stays around even when there are no extant patches.) Users who wish to use the hyperref package, in a document written with the memoir class, should also use the memhfixc package (part of this bundle). Note, however, that current versions of hyperref actually load the package automatically if they detect that they are running under memoir.\n"
-"\n"
-"date: 2013-05-22 15:25:30 +0000"
+#. summary(texlive-specs-r:texlive-presentations-en)
+msgid "Examples from the book Presentations with LaTeX"
msgstr ""
-#. description(texlive-mftinc)
+#. description(texlive-specs-r:texlive-presentations-en)
msgid ""
-"The mft program pretty-prints Metafont source code into a TeX file. The mftinc package facilitates incorporating such files into a LaTeX2e document. In addition, mftinc provides routines for improved comment formatting and for typesetting font tables.\n"
+"This bundle contains all the examples, as source, eps and pdf, of the author's book \"Presentations with LaTeX\", from the Dante-Edition series, Published by Lehmanns Media.\n"
"\n"
-"date: 2007-01-10 23:21:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mh)
-msgid ""
-"The mh bundle is a series of packages designed to enhance the appearance of documents containing a lot of math. The main backbone is amsmath, so those unfamiliar with this required part of the LaTeX system will probably not find the packages very useful. Component parts of the bundle are: breqn, empheq, flexisym, mathstyle and mathtools, mhsetup, The empheq package is a visual markup extension of amsmath. Empheq allows sophisticated boxing and other marking of multi-line maths displays, and fixes problems with the way that the ntheorem package places end-of-theorem markers. The mathtools package provides many useful tools for mathematical typesetting. It fixes various deficiencies of amsmath and standard LaTeX. The mhsetup package defines various programming tools needed by both empheq and mathtools. The breqn package makes more easy the business of preparing displayed equations in LaTeX, including permitting automatic line-breaking within displayed equations. (Breqn uses the maths
tyle package to keep track of the current maths typesetting style, something that raw TeX hides from the programmer.)\n"
-"\n"
-"date: 2013-03-16 23:29:52 +0000"
+#. summary(texlive-specs-r:texlive-prettyref)
+msgid "Make label references \"self-identify\""
msgstr ""
-#. description(texlive-microtype-de)
+#. description(texlive-specs-r:texlive-prettyref)
msgid ""
-"The microtype-de package\n"
+"Prettyref provides a command \\newrefformat, which specifies the way in which a reference is typeset, according to a label \"identification\". The identification is set in the \\label command, by using prefixed label names; so instead of \\label{mysection}, one uses \\label{sec:mysection}, and prettyref interprets the \"sec:\" part. The package is compatible with hyperref and with other packages.\n"
"\n"
-"date: 2011-04-03 21:29:51 +0000"
+"date: 2012-04-01 08:24:43 +0000"
msgstr ""
-#. description(texlive-minitoc)
+#. summary(texlive-specs-r:texlive-prettyref-doc)
+#, fuzzy
+msgid "Documentation for texlive-prettyref"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-prettyref-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-prettyref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-preview)
+msgid "Extract bits of a LaTeX source for output"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-preview)
msgid ""
-"The minitoc package allows you to add mini-tables-of-contents (minitocs) at the beginning of every chapter, part or section. There is also provision for mini-lists of figures and of tables. At the part level, they are parttocs, partlofs and partlots. If the type of document does not use chapters, the basic provision is section level secttocs, sectlofs and sectlots. The package has provision for language-specific configuration of its own \"fixed names\", using .mld files (analagous to babel .ldf files that do that job for LaTeX\"s own fixed names).\n"
+"The package is a free-standing part of the preview-latex bundle. The package provides the support preview-latex needs, when it chooses the matter it will preview. The output may reasonably be expected to have other uses, as in html translators, etc.\n"
"\n"
-"date: 2009-05-25 22:38:29 +0000"
+"date: 2012-12-02 21:39:14 +0000"
msgstr ""
-#. description(texlive-misc)
-msgid "The misc package"
-msgstr ""
+#. summary(texlive-specs-r:texlive-preview-doc)
+#, fuzzy
+msgid "Documentation for texlive-preview"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-misc209)
-msgid "The misc209 package"
+#. description(texlive-specs-r:texlive-preview-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-preview"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-printlen)
+msgid "Print lengths using specified units"
msgstr ""
-#. description(texlive-mptopdf)
-msgid "The mptopdf script does standalone conversion from mpost to PDF, using the supp-* and syst-* files. They also allow native MetaPost graphics inclusion in LaTeX (via pdftex.def) and ConTeXt. They can be used independently of the rest of ConTeXt, yet are maintained as part of it. So in TeX Live we pull them out to this separate package for the benefit of LaTeX users who do not install the rest of ConTeXt. This can be found on CTAN in macros/pdftex/graphics."
+#. description(texlive-specs-r:texlive-printlen)
+msgid ""
+"\\printlength{length} prints the value of a LaTeX length in the units specified by \\uselengthunit{unit} ('unit' may be any TeX length unit except for scaled point, viz., any of: pt, pc, in, mm, cm, bp, dd or cc). When the unit is pt, the printed length value will include any stretch or shrink; otherwise these are not printed. The 'unit' argument may also be PT, in which case length values will be printed in point units but without any stretch or shrink values.\n"
+"\n"
+"date: 2012-07-19 12:50:35 +0000"
msgstr ""
-#. description(texlive-multienv)
+#. summary(texlive-specs-r:texlive-printlen-doc)
#, fuzzy
-msgid "The multienv package"
-msgstr "Aktualizovat balíky"
+msgid "Documentation for texlive-printlen"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-yagusylo)
-msgid ""
-"The name is by way of being an acronym for \"Yet Another Grand Unified Symbols Loader\"... The package allows the user to access a symbol without loading the package that usually provides it; this has the advantage of avoiding the name clashes that so commonly trouble those who load symbol- packages.\n"
-"\n"
-"date: 2012-07-21 15:20:52 +0000"
+#. description(texlive-specs-r:texlive-printlen-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-printlen"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-proba)
+msgid "Shortcuts commands to symbols used in probability texts"
msgstr ""
-#. description(texlive-namespc)
+#. description(texlive-specs-r:texlive-proba)
msgid ""
-"The namespc package adds rudimentary c++-like namespace functionality to LaTeX. It may be used to declare local LaTeX commands, which can be made accessible in a later contexts without defining them globally.\n"
+"This package includes some of the most often used commands in probability texts, e.g. probability, expectation, variance, etc. It also includes some short commands for set (blackboard) or filtrations (calligraphic). It requires LaTeX2e and the amsfonts package.\n"
"\n"
-"date: 2006-12-22 13:37:19 +0000"
+"date: 2012-07-19 12:50:35 +0000"
msgstr ""
-#. description(texlive-ncclatex)
+#. summary(texlive-specs-r:texlive-proba-doc)
+#, fuzzy
+msgid "Documentation for texlive-proba"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-proba-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-proba"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-probsoln)
+msgid "Generate problem sheets and their solution sheets"
+msgstr ""
+
+#. description(texlive-specs-r:texlive-probsoln)
msgid ""
-"The ncc class provides a framework for a common class to replace the standard article, book and report classes, and providing a \"preprint\" class. The class's extensions are provided in a number of small packages, some of which may also be used with the standard classes. The ncclatex package also loads many of the packages of, and requires the latest version of the ncctools bundle.\n"
+"The package is designed for lecturers who have to generate new problem sheets for their students on a regular basis (e.g. yearly) by randomly selecting a specified number of problems defined in another file. The package allows you easily to generate a new problem sheet that is different from the previous year, thus alleviating the temptation of students to seek out the previous year's students and checking out their answers. The solutions to the problems can be defined along with the problem, making it easy to generate the solution sheet from the same source code; problems may be reused within a document, so that solutions may appear in a different section of the same document as the problems they cover.\n"
"\n"
-"date: 2007-02-23 21:01:12 +0000"
+"date: 2013-03-16 23:29:52 +0000"
msgstr ""
-#. summary(texlive-makecmds)
-msgid "The new \\makecommand command always (re)defines a command"
+#. summary(texlive-specs-r:texlive-probsoln-doc)
+#, fuzzy
+msgid "Documentation for texlive-probsoln"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-probsoln-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-probsoln"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-procIAGssymp)
+msgid "Macros for IAG symposium papers"
msgstr ""
-#. description(texlive-newsletr)
+#. description(texlive-specs-r:texlive-procIAGssymp)
msgid ""
-"The newsletr package\n"
+"This package provides (re-)definitions of some LaTeX commands that can be useful for the preparation of a paper with the style of the proceeding of symposia sponsored by the 'International Association of Geodesy (IAG)' published by Springer-Verlag.\n"
"\n"
-"date: 2006-12-22 18:14:47 +0000"
+"date: 2012-07-20 18:39:39 +0000"
msgstr ""
-#. description(texlive-newspaper)
-msgid ""
-"The newspaper package redefines the page style and \\maketitle command to produce a typeset page similar to that off a newspaper. It also provides several commands that (when used with other packages) simplify the writing of articles in a newspaper-style column format.\n"
-"\n"
-"date: 2008-08-22 15:15:44 +0000"
+#. summary(texlive-specs-r:texlive-procIAGssymp-doc)
+#, fuzzy
+msgid "Documentation for texlive-procIAGssymp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-procIAGssymp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-procIAGssymp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-prodint)
+msgid "A font that provides the product integral symbol"
msgstr ""
-#. description(texlive-nih)
+#. description(texlive-specs-r:texlive-prodint)
msgid ""
-"The nih class offers support for grant applications to NIH, the National Institutes of Health, a US government agency. The example-* files provide a template for using nih.cls and submitting the biographical sketches the NIH wants. They (potentially) use denselists package, which just reduces list spacing; the package is distributed with the class, but is not part of the class proper. (The examples may be distributed without even the restrictions of the LaTeX licence.)\n"
+"Product integrals are to products, as integrals are to sums. They have been around for more than a hundred years, they have not become part of the standard mathematician's toolbox, possibly because no-one invented the right mathematical symbol for them. The authors have remedied that situation by proposing the symbol and providing this font.\n"
"\n"
-"date: 2007-03-10 11:31:42 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-norasi-c90)
-msgid "The norasi-c90 package"
+#. summary(texlive-specs-r:texlive-prodint-doc)
+#, fuzzy
+msgid "Documentation for texlive-prodint"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-prodint-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-prodint"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-prodint-fonts)
+msgid "Severed fonts for texlive-prodint"
msgstr ""
-#. description(texlive-ntheorem-vn)
-msgid "The ntheorem-vn package"
+#. description(texlive-specs-r:texlive-prodint-fonts)
+msgid "The separated fonts package for texlive-prodint"
msgstr ""
-#. description(texlive-numberedblock)
-msgid "The numberedblock package"
+#. summary(texlive-specs-r:texlive-productbox)
+msgid "Typeset a three-dimensional product box"
msgstr ""
-#. description(texlive-octavo)
+#. description(texlive-specs-r:texlive-productbox)
msgid ""
-"The octavo class is a modification of the standard LaTeX book class. Its purpose is to typeset books following classical design and layout principles, with the express intention of encouraging the making of beautiful books by anyone with access to a good printer and with an inclination towards venerable crafts, e.g., bookbinding. The octavo class differs from the book class by implementing many of the proposals and insights of respected experts, especially Jan Tschichold and Hugh Williamson. The documentation discusses methods to organise and print out any text into signatures, which can then be gathered, folded and sewn into a book.\n"
+"The package enables typesetting of a three-dimensional product box. This product box can be rendered as it is standing on a surface and some light is shed onto it. Alternatively it can be typeset as a wireframe to be cut out and glued together. This will lead to a physical product box. The package requires pgf and TikZ.\n"
"\n"
-"date: 2007-03-07 17:02:23 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-omegaware)
-msgid "The omegaware package"
-msgstr ""
+#. summary(texlive-specs-r:texlive-productbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-productbox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-otibet)
-msgid "The otibet package"
+#. description(texlive-specs-r:texlive-productbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-productbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-program)
+msgid "Typesetting programs and algorithms"
msgstr ""
-#. description(texlive-overpic)
+#. description(texlive-specs-r:texlive-program)
msgid ""
-"The overpic environment is a cross between the LaTeX picture environment and the \\includegraphics command of graphicx. The resulting picture environment has the same dimensions as the included eps graphic. LaTeX commands can be placed on the graphic at defined positions. A grid for orientation is available.\n"
+"The main offering is a program environment; a programbox environment is available for fragments that must not break with the pages.\n"
"\n"
-"date: 2010-09-13 09:39:12 +0000"
+"date: 2012-04-20 11:29:23 +0000"
msgstr ""
-#. description(texlive-keycommand)
-msgid ""
-"The package (which requires e-TeX) provides a natural way to define commands with optional keys. The package provides \\newkeycommand, \\renewkeycommand, \\providekeycommand, \\newkeyenvironment and \\renewkeyenvironment, together with \\keycmd for a more advanced interface. The package is based on kvsetkeys by Heiko Oberdiek.\n"
-"\n"
-"date: 2010-04-27 07:59:23 +0000"
+#. summary(texlive-specs-r:texlive-program-doc)
+#, fuzzy
+msgid "Documentation for texlive-program"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-program-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-program"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-progress)
+msgid "Creates an overview of a document's state"
msgstr ""
-#. description(texlive-tikzinclude)
+#. description(texlive-specs-r:texlive-progress)
msgid ""
-"The package addresses the problem of importing only one TikZ- image from a file holding multiple images.\n"
+"Progress is a package which. when compiling TeX and LaTeX documents, generates a HTML file showing an overview of a document's state (of how finished it is). The report is sent to file \\ProgressReportName, which is by default the \\jobname with the date appended (but is user-modifiable).\n"
"\n"
-"date: 2013-01-03 18:43:19 +0000"
+"date: 2012-04-20 11:29:23 +0000"
msgstr ""
-#. description(texlive-rvwrite)
-msgid ""
-"The package addresses, for LaTeX documents, the severe limitation on the number of output streams that TeX provides. The package uses a single TeX output stream, and writes \"marked-up\" output to this stream. The user may then post- process the marked-up output file, using LaTeX, and the document's output appears as separate files, according to the calls made to the package. The output to be post-processed uses macros from the widely-available ProTeX package.\n"
-"\n"
-"date: 2010-08-31 10:08:50 +0000"
+#. summary(texlive-specs-r:texlive-progress-doc)
+#, fuzzy
+msgid "Documentation for texlive-progress"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-progress-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-progress"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-progressbar)
+msgid "Visualize shares of total amounts in the form of a (progress-)bar"
msgstr ""
-#. description(texlive-pgf-blur)
+#. description(texlive-specs-r:texlive-progressbar)
msgid ""
-"The package adds blurred/faded/fuzzy shadows to TikZ/PGF pictures. It is configured as a TikZ/PGF library module. The method is similar to that of the author's pst-blur package for PSTricks.\n"
+"This package allows you to easily visualize shares of total amounts in the form of a bar. So basically you can convert any number between 0 and 1 to a progressbar using the command \\progressbar{<number>}. Also a lot of customizations are possible, allowing you to create an unique progressbar on your own. The package uses TikZ to produce its graphics.\n"
"\n"
-"date: 2012-04-24 14:17:04 +0000"
+"date: 2014-05-04 09:26:45 +0000"
msgstr ""
-#. description(texlive-pst-platon)
-msgid ""
-"The package adds to PSTricks the ability to draw 3-dimensional views of the five Platonic solids.\n"
-"\n"
-"date: 2009-12-31 23:46:51 +0000"
+#. summary(texlive-specs-r:texlive-progressbar-doc)
+#, fuzzy
+msgid "Documentation for texlive-progressbar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-progressbar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-progressbar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-properties)
+msgid "Load properties from a file"
msgstr ""
-#. description(texlive-luaotfload)
+#. description(texlive-specs-r:texlive-properties)
msgid ""
-"The package adopts the TrueType/OpenType Font loader code provided in ConTeXt, and adapts it to use in Plain TeX and LaTeX.\n"
+"The package loads properties (key, value) from a properties file, e.g. \\jobname.properties.\n"
"\n"
-"date: 2013-05-24 10:22:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-spelling)
-msgid ""
-"The package aids spell-checking of TeX documents compiled with the LuaTeX engine. It can give visual feedback in PDF output similar to WYSIWYG word processors. The package relies on an external spell-checker application to check spelling of a text file and to output a list of bad spellings. The package should work with most spell-checkers, even dumb, TeX-unaware ones.\n"
-"\n"
-"date: 2013-05-27 18:07:27 +0000"
+#. summary(texlive-specs-r:texlive-properties-doc)
+#, fuzzy
+msgid "Documentation for texlive-properties"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-properties-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-properties"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-proposal)
+msgid "A class for preparing proposals"
msgstr ""
-#. description(texlive-russ)
+#. description(texlive-specs-r:texlive-proposal)
msgid ""
-"The package aims to facilitate Russian typesetting (based on input using MicroSoft Code Page 1251). Russian hyphenation is selected, and various mathematical commands are set up in Russian style. Furthermore all Cyrillic letters' catcodes are set to \"letter\", so that commands with Cyrillic letters in their names may be defined.\n"
+"The process of preparing a collaborative proposal, to a major funding body, involves integration of contributions of a many people at many sites. It is therefore an ideal application for a text-based document preparation system such as LaTeX, in concert with a distributed version control system such as SVN. The proposal class itself provides a basis for such an enterprise. The dfgproposal and dfgproposal classes provide two specialisations of the base class for (respectively) German and European research proposals. The packages depend on the author's stex bundle.\n"
"\n"
-"date: 2012-01-25 22:56:43 +0000"
+"date: 2014-04-30 17:02:32 +0000"
msgstr ""
-#. description(texlive-morewrites)
-msgid ""
-"The package aims to solve the error \"No room for a new \\write\", which occurs when the user, or when the user's packages have 'allocated too many streams using \\newwrite (TeX has a fixed maximum number - 16 - such streams built-in to its code). The package hooks into TeX primitive commands associated with writing to files; it should be loaded near the beginning of the sequence of loading packages for a document. The package uses the l3kernel bundle.\n"
-"\n"
-"date: 2013-01-08 13:50:28 +0000"
+#. summary(texlive-specs-r:texlive-proposal-doc)
+msgid "Documentation for texlive-proposal"
msgstr ""
-#. description(texlive-urwchancal)
-msgid ""
-"The package allows (the URW clone of) Zapf Chancery to function as a maths alphabet, the target of \\mathcal or \\mathscr, with accents appearing where they should, and other spacing parameters set to reasonable (not very tight) values.\n"
-"\n"
-"date: 2011-03-10 09:40:13 +0000"
+#. description(texlive-specs-r:texlive-proposal-doc)
+msgid "This package includes the documentation for texlive-proposal"
msgstr ""
-#. description(texlive-mpgraphics)
+#. summary(texlive-specs-r:texlive-prosper)
+#, fuzzy
+msgid "LaTeX class for high quality slides"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
+
+#. description(texlive-specs-r:texlive-prosper)
msgid ""
-"The package allows LaTeX users to typeset MetaPost code inline and display figures in their documents with only and only one run of LaTeX, PDFLaTeX or XelaTeX (no separate runs of mpost). Mpgraphics achieves this by using the shell escape (\\write 18) feature of current TeX distributions, so that the whole process is automatic and the end user is saved the tiresome processing.\n"
+"Prosper is a LaTeX class for writing transparencies. It is written as an extension of the seminar class by Timothy Van Zandt. Prosper offers a friendly environment for creating slides for both presentations with an overhead projector and a video projector. Slides prepared for a presentation with a computer and a video projector may integrate animation effects, incremental display, and so on. Various visual styles are supported (including some that mimic PowerPoint) and others are being contributed.\n"
"\n"
-"date: 2013-04-08 07:07:09 +0000"
+"date: 2012-02-25 09:31:12 +0000"
msgstr ""
-#. description(texlive-pxgreeks)
-msgid ""
-"The package allows LaTeX users who use the PX fonts to select the shapes (italic or upright) for the Greek lowercase and uppercase letters. Once the shapes for lowercase and uppercase have been selected via a package option, the \\other prefix (e.g., \\otheralpha) allows using the alternate glyph (as in the fourier package). The pxgreeks package does not constrain the text font that may be used in the document.\n"
-"\n"
-"date: 2011-03-18 11:27:11 +0000"
+#. summary(texlive-specs-r:texlive-prosper-doc)
+#, fuzzy
+msgid "Documentation for texlive-prosper"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-prosper-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-prosper"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-protex)
+msgid "Literate programming package"
msgstr ""
-#. description(texlive-txgreeks)
+#. description(texlive-specs-r:texlive-protex)
msgid ""
-"The package allows LaTeX users who use the TX fonts to select the shapes (italic or upright) for the Greek lowercase and uppercase letters. Once the shapes for lowercase and uppercase have been selected via a package option, the \\other prefix (e.g., \\otheralpha) allows using the alternate glyph (as in the fourier package). The txgreeks package does not constrain the text font that may be used in the document.\n"
+"ProTeX is a simple but powerful literate programming tool, which is designed to generate useful hypertext output (either PDF, or HTML using TeX4ht).\n"
"\n"
-"date: 2011-03-18 11:27:11 +0000"
+"date: 2012-05-30 18:28:00 +0000"
msgstr ""
-#. description(texlive-spot)
-msgid ""
-"The package allows dramatic highlighting of words and phrases by painting shapes around them. It is chiefly intended for use in Beamer presentations, but it can be used in other document classes as well.\n"
-"\n"
-"date: 2011-05-09 23:20:26 +0000"
+#. summary(texlive-specs-r:texlive-protex-doc)
+#, fuzzy
+msgid "Documentation for texlive-protex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-protex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-protex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-protocol)
+msgid "A class for minutes of meetings"
msgstr ""
-#. description(texlive-menukeys)
+#. description(texlive-specs-r:texlive-protocol)
msgid ""
-"The package allows easy input and formatting of menu sequences, using menus set with commands such as \\menu{Extras > Settings > General}, paths using a command like \\path{macros/latex/contrib/menukeys} and short cuts such aas \\keys{\\ctrl + C}. The output is highly configurable by providing different styles and colour themes.\n"
+"The present version of the class supports German meeting minutes including vote results and action items. The author has ambitions to internationalise the code, and would welcome support in the work.\n"
"\n"
-"date: 2013-05-28 17:52:13 +0000"
+"date: 2012-03-03 17:35:38 +0000"
msgstr ""
-#. description(texlive-superiors)
-msgid ""
-"The package allows the attachment of an arbitrary superior figures font to a font family that lacks one. (Superior figures are commonly used as footnote markers.) Two superior figures fonts are provided--one matching Times, the other matching Libertine.\n"
-"\n"
-"date: 2013-02-18 22:06:04 +0000"
+#. summary(texlive-specs-r:texlive-protocol-doc)
+#, fuzzy
+msgid "Documentation for texlive-protocol"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-protocol-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-protocol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-przechlewski-book)
+msgid "Examples from Przechlewski's LaTeX book"
msgstr ""
-#. description(texlive-newverbs)
+#. description(texlive-specs-r:texlive-przechlewski-book)
msgid ""
-"The package allows the definition of \\verb variants which add TeX code before and after the verbatim text (e.g., quotes or surrounding \\fbox{}). When used together with the shortvrb package it allows the definition of short verbatim characters which use this package's variant instead of the normal \\verb. In addition, it is possible to collect an argument verbatim to either typeset or write it into a file. The \\Verbdef command defines verbatim text to a macro which can later be used to write the verbatim text to a file.\n"
+"The bundle provides machine-readable copies of the examples from the book \"Praca magisterska i dyplomowa z programem LaTeX\".\n"
"\n"
-"date: 2012-05-08 13:35:13 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-eucl)
-msgid ""
-"The package allows the drawing of Euclidean geometric figures using TeX pstricks macros for specifying mathematical constraints. It is thus possible to build point using common transformations or intersections. The use of coordinates is limited to points which controlled the figure.\n"
-"\n"
-"date: 2013-03-12 19:16:10 +0000"
+#. summary(texlive-specs-r:texlive-przechlewski-book-doc)
+#, fuzzy
+msgid "Documentation for texlive-przechlewski-book"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-przechlewski-book-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-przechlewski-book"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-ps2pkm)
+msgid "Generate a PK font from an Adobe Type 1 font"
msgstr ""
-#. description(texlive-pst-am)
+#. description(texlive-specs-r:texlive-ps2pkm)
msgid ""
-"The package allows the simulation of the modulated and demodulated amplitude of radio waves. The user may plot curves of modulated signals, wave carrier, signal modulation, signal recovery and signal demodulation.\n"
+"Generates a PK file from an Adobe Type 1 font. PK fonts are (or used to be) valuable in enabling previewers to view documents generated that use Type 1 fonts. The program makes use of code donated to the X consortium by IBM.\n"
"\n"
-"date: 2010-09-04 12:00:25 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-spreadtab)
-msgid ""
-"The package allows the user to construct tables in a manner similar to a spreadsheet. The cells of a table have row and column indices and these can be used in formulas to generate values in other cells.\n"
-"\n"
-"date: 2012-05-14 10:19:39 +0000"
+#. summary(texlive-specs-r:texlive-psbao)
+msgid "Draw Bao diagrams"
msgstr ""
-#. description(texlive-memory)
+#. description(texlive-specs-r:texlive-psbao)
msgid ""
-"The package allows the user to declare single object or array containers.\n"
+"The package draws Bao diagrams in LaTeX. The package is a development of psgo, and uses PSTricks to draw the diagrams.\n"
"\n"
-"date: 2013-05-13 18:07:16 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-unisugar)
-msgid ""
-"The package allows the user to define shorthand aliases for single Unicode characters, and also provides support for such aliases in RTL-text. The package requires an TeX-alike system that uses Unicode input in a native way: current examples are XeTeX and LuaTeX.\n"
-"\n"
-"date: 2011-05-08 09:17:43 +0000"
+#. summary(texlive-specs-r:texlive-psbao-doc)
+#, fuzzy
+msgid "Documentation for texlive-psbao"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-psbao-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psbao"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pseudocode)
+msgid "LaTeX environment for specifying algorithms in a natural way"
msgstr ""
-#. description(texlive-tkz-kiviat)
+#. description(texlive-specs-r:texlive-pseudocode)
msgid ""
-"The package allows the user to draw Kiviat Graphs directly, or with data from an external file. The drawing is done with the help of pgfplots.\n"
+"This package provides the environment \"pseudocode\" for describing algorithms in a natural manner.\n"
"\n"
-"date: 2011-06-07 13:47:15 +0000"
+"date: 2011-10-12 11:03:40 +0000"
msgstr ""
-#. description(texlive-varsfromjobname)
+#. summary(texlive-specs-r:texlive-pseudocode-doc)
+#, fuzzy
+msgid "Documentation for texlive-pseudocode"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pseudocode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pseudocode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-psfrag)
+#, fuzzy
+#| msgid "Bitmap Image to Encapsulated PostScript Converter"
+msgid "Replace strings in encapsulated PostScript figures"
+msgstr "Konvertor bitmapových obrázků do EPS"
+
+#. description(texlive-specs-r:texlive-psfrag)
msgid ""
-"The package allows the user to extract information from the job name, provided that the name has been structured appropriately: the package expects the file name to consist of a set of words separated by hyphens.\n"
+"Allows LaTeX constructions (equations, picture environments, etc.) to be precisely superimposed over Encapsulated PostScript figures, using your own favorite drawing tool to create an EPS figure and placing simple text 'tags' where each replacement is to be placed, with PSfrag automatically removing these tags from the figure and replacing them with a user specified LaTeX construction, properly aligned, scaled, and/or rotated.\n"
"\n"
-"date: 2009-01-12 08:20:39 +0000"
+"date: 2012-06-08 13:42:15 +0000"
msgstr ""
-#. description(texlive-silence)
-msgid ""
-"The package allows the user to filter out unwanted warnings and error messages issued by LaTeX, packages and classes, so they won't pop out when there's nothing one can do about them. Filtering goes from the very broad (\"avoid all messages by such and such\") to the fine-grained (\"avoid messages that begin with...\"). Messages may be saved to an external file for later reference.\n"
-"\n"
-"date: 2012-07-04 08:43:54 +0000"
+#. summary(texlive-specs-r:texlive-psfrag-doc)
+#, fuzzy
+msgid "Documentation for texlive-psfrag"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-psfrag-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psfrag"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-psfrag-italian)
+msgid "PSfrag documentation in Italian"
msgstr ""
-#. description(texlive-tagging)
+#. description(texlive-specs-r:texlive-psfrag-italian)
+#, fuzzy
msgid ""
-"The package allows the user to generate multiple documents from a single source, by marking pieces of the document with tags and specifying which marked pieces to include or exclude.\n"
+"This is a translation of the documentation that comes with the psfrag documentation.\n"
"\n"
-"date: 2011-08-28 22:41:24 +0000"
+"date: 2012-03-19 12:11:25 +0000"
+msgstr "Bulharské překlady pro KOffice"
+
+#. summary(texlive-specs-r:texlive-psfragx)
+msgid "A psfrag eXtension"
msgstr ""
-#. description(texlive-readarray)
+#. description(texlive-specs-r:texlive-psfragx)
msgid ""
-"The package allows the user to input formatted data into elements of a 2-D or 3-D array and to recall that data at will by individual cell number. The data can be but need not be numerical in nature. It can be, for example, formatted text. While the package can be used for any application where indexed data is called for, the package proves particularly useful when elements of multiple arrays must be recallable and dynamically combined at time of compilation, rather than in advance.\n"
+"PSfragX offers a mechanism to embed \\psfrag commands, as provided by the psfrag package, into the EPS file itself. Each time a graphic is included, the EPS file is scanned. If some tagged lines are found, they are used to define the psfrag replacements that should be performed automatically. In addition, a similar mechanism holds for overpic objects. These are picture objects superimposed on the included graphic. A similar mechanism is implemented in psfrag itself (but deprecated in the documentation), but psfragx offers much more flexibility. For example, if babel is used, it is possible to define different replacements corresponding to different languages. The replacements to take into account will be selected on the basis of the current language of the document. A Matlab script (LaPrint) is provided, to export an EPS file with psfragx annotations ready embedded.\n"
"\n"
-"date: 2013-05-14 22:25:13 +0000"
+"date: 2012-06-08 13:42:15 +0000"
msgstr ""
-#. description(texlive-undolabl)
-msgid ""
-"The package allows the user to override existing labels (for example, those generated automatically).\n"
-"\n"
-"date: 2012-01-02 13:24:13 +0000"
+#. summary(texlive-specs-r:texlive-psfragx-doc)
+#, fuzzy
+msgid "Documentation for texlive-psfragx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-psfragx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psfragx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-psgo)
+msgid "Typeset go diagrams with PSTricks"
msgstr ""
-#. description(texlive-pst-asr)
+#. description(texlive-specs-r:texlive-psgo)
msgid ""
-"The package allows the user to typeset autosegmental representations. It uses the PStricks, and xkeyval packages.\n"
+"The psgo package\n"
"\n"
-"date: 2011-04-20 16:25:54 +0000"
+"date: 2012-07-23 12:43:10 +0000"
msgstr ""
-#. description(texlive-logicpuzzle)
-msgid ""
-"The package allows the user to typeset various logic puzzles. At the moment the following puzzles are supported: - 2D-Sudoku (aka Magiequadrat, Diagon, ...), - Battleship (aka Bimaru, Marinespiel, Batalla Naval, ...), - Bokkusu (aka Kakurasu, Feldersummenratsel, ...), - Bridges (akak Bruckenbau, Hashi, ...), - Chaos Sudoku, - Hakyuu (aka Seismic, Ripple Effect, ...), - Hitori, - Kakuro, - Kendoku (aka Mathdoku, Calcudoku, Basic, MiniPlu, Ken Ken, Square Wisdom, Sukendo, Caldoku, ...,\n"
-"- Killer Sudoku (aka Samunapure, Sum Number Place, Sumdoku, Gebietssummen, ...), - Laser Beam (aka Laserstrahl, ...), - Minesweeper (aka Minensuche, ...), - Schatzsuche, - Skyline (aka Skycrapers, Wolkenkratzer, Hochhauser, ...), including Skyline Sudoku and Skyline Sudoku (N*N) variants, - Slitherlink (aka Fences, Number Line, Dotty Dilemma, Sli-Lin, Takegaki, Great Wall of China, Loop the Loop, Rundweg, Gartenzaun, ...),\n"
-"- Star Battle (aka Sternenschlacht, ...), - Stars and Arrows (aka Sternenhimmel, ...), - Sudoku, - Sun and Moon (aka Sternenhaufen, Munraito, ...), - Tents and Trees (aka Zeltlager, Zeltplatz, Camping, ...), and - Tunnel.\n"
-"\n"
-"date: 2013-05-18 15:41:16 +0000"
+#. summary(texlive-specs-r:texlive-psgo-doc)
+#, fuzzy
+msgid "Documentation for texlive-psgo"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-psgo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psgo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-psizzl)
+msgid "A TeX format for physics papers"
msgstr ""
-#. description(texlive-tablor)
+#. description(texlive-specs-r:texlive-psizzl)
msgid ""
-"The package allows the user to use the computer algebra system XCAS to generate tables of signs and of variations (the actual plotting of the tables uses the MetaPost macro package tableauVariations). Tables with forbidden regions may be developed using the package. A configuration file permits some configuration of the language to be used in the diagrams. The tablor package requires that shell escape be enabled.\n"
+"PSIZZL is a TeX format for physics papers written at SLAC and used at several other places. It dates from rather early in the development of TeX82; as a result, some of the descriptions of limitations look rather quaint to modern eyes.\n"
"\n"
-"date: 2012-02-20 00:12:37 +0000"
+"date: 2011-11-19 22:22:36 +0000"
msgstr ""
-#. description(texlive-sidenotes)
+#. summary(texlive-specs-r:texlive-psizzl-doc)
+#, fuzzy
+msgid "Documentation for texlive-psizzl"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-psizzl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psizzl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pslatex)
+#, fuzzy
+#| msgid "Scalable PostScript Fonts for MetaFont"
+msgid "Use PostScript fonts by default"
+msgstr "Vektorová PostScriptová písma pro MetaFont"
+
+#. description(texlive-specs-r:texlive-pslatex)
msgid ""
-"The package allows typesetting of texts with notes, figures, citations, captions and tables in the margin. This is common (for example) in science text books.\n"
+"A small package that makes LaTeX default to 'standard' PostScript fonts. It is basically a merger of the times and the (obsolete) mathptm packages from the psnfss suite. You must have installed standard LaTeX and the psnfss PostScript fonts to use this package. The main novel feature is that the pslatex package tries to compensate for the visual differences between the Adobe fonts by scaling Helvetica by 90%, and 'condensing' Courier (i.e. scaling horizontally) by 85%. The package is supplied with a (unix) shell file for a 'pslatex' command that allows standard LaTeX documents to be processed, without needing to edit the file. Note that current psnfss uses a different technique for scaling Helvetica, and treats Courier as a lost cause (there are better free fixed-width available now, than there were when pslatex was designed). As a result, pslatex is widely considered obsolete.\n"
"\n"
-"date: 2012-11-11 12:12:37 +0000"
+"date: 2012-07-23 12:43:10 +0000"
msgstr ""
-#. description(texlive-smalltableof)
+#. summary(texlive-specs-r:texlive-psnfss)
+#, fuzzy
+#| msgid "a2ps support for Korean PostScript filter (Python version)."
+msgid "Font support for common PostScript fonts"
+msgstr "a2ps podpora pro korejský postscriptový filtr (Python verze)."
+
+#. description(texlive-specs-r:texlive-psnfss)
msgid ""
-"The package allows you to create a list of figures and list of tables in a chapter named 'List' that contains separate sections for each list of figures, tables, etc.\n"
+"Font definition files, macros and font metrics for freely- available Adobe Type 1 fonts. The font set consists of the 'LaserWriter 35' set (originally 'freely available' because embedded in PostScript printers), and a variety of other free fonts, together with some additions. Note that while many of the fonts are available in PostScript (and other) printers, most publishers require fonts embedded in documents, which requires that you have the fonts in your TeX system. Fortunately, there are free versions of the fonts from URW (available in the URW base5 bundle). The base set of text fonts covered by PSNFSS are: AvantGarde, Bookman, Courier, Helvetica, New Century Schoolbook, Palatino, Symbol, Times Roman and Zapf Dingbats. In addition, the fonts Bitstream Charter and Adobe Utopia are covered (those fonts were contributed to the Public Domain by their commercial foundries). Separate packages are provided to load each font for use as main text font. The packages helvet (which allows
Helvetica to be loaded with its size scaled to something more nearly appropriate for its use as a Sans-Serif font to match Times) and pifont (which provides the means to select single glyphs from symbol fonts) are tailored to special requirements of their fonts. Mathematics are covered by the mathptmx package, which constructs passable mathematics from a combination of Times Roman, Symbol and some glyphs from Computer Modern, and by Pazo Math (optionally extended with the fpl small-caps and old-style figures fonts) which uses Palatino as base font, with the mathpazo fonts. The bundle as a whole is part of the LaTeX 'required' set of packages.\n"
"\n"
-"date: 2010-11-05 11:10:03 +0000"
+"date: 2012-07-23 13:04:13 +0000"
msgstr ""
-#. description(texlive-metago)
+#. summary(texlive-specs-r:texlive-psnfss-doc)
+#, fuzzy
+msgid "Documentation for texlive-psnfss"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-psnfss-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psnfss"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pspicture)
+#, fuzzy
+msgid "PostScript picture support"
+msgstr "Prohlížeče PostScriptu a PDF souborů pro KDE"
+
+#. description(texlive-specs-r:texlive-pspicture)
msgid ""
-"The package allows you to draw Go game positions with MetaPost. Two methods of usage are provided, either using the package programmatically, or using the package via a script (which may produce several images).\n"
+"A replacement for LaTeX's picture macros, that uses PostScript \\special commands. The package is now largely superseded by pict2e.\n"
"\n"
-"date: 2008-09-08 09:32:46 +0000"
+"date: 2012-07-23 13:04:13 +0000"
msgstr ""
-#. description(texlive-systeme)
-msgid ""
-"The package allows you to enter systems of equations or inequalities in an intuitive way, and produces typeset output where the terms and signs are aligned vertically. The package works with plain TeX or LaTeX, but e-TeX is required. Cette petite extension permet de saisir des systemes d'equations ou inequations de facon intuitive, et produit un affichage ou les termes et les signes sont alignes verticalement.\n"
-"\n"
-"date: 2011-06-24 09:48:53 +0000"
+#. summary(texlive-specs-r:texlive-pspicture-doc)
+#, fuzzy
+msgid "Documentation for texlive-pspicture"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pspicture-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pspicture"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-2dplot)
+msgid "A PSTricks package for drawing 2D curves"
msgstr ""
-#. description(texlive-todo)
+#. description(texlive-specs-r:texlive-pst-2dplot)
msgid ""
-"The package allows you to insert \"to do\" marks in your document, to make lists of such items, and to cross-reference to them.\n"
+"Pst-2dplot is a pstricks package that offers an easy-to-use and intuitive tool for plotting 2-d curves. It defines an environment with commands similar to MATLAB for plotting.\n"
"\n"
-"date: 2010-04-01 19:27:08 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-titlepic)
-msgid ""
-"The package allows you to place a picture on the title page (cover page) of a LaTeX document. Example of usage: \\usepackage[cc]{titlepic} \\usepackage{graphicx} \\titlepic{\\includegraphics[width=\\textwidth]{picture.png}} The package currently only works with the document classes article, report and book.\n"
-"\n"
-"date: 2009-11-10 07:50:14 +0000"
+#. summary(texlive-specs-r:texlive-pst-2dplot-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-2dplot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-2dplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-2dplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-3d)
+msgid "A PSTricks package for tilting and other pseudo-3D tricks"
msgstr ""
-#. description(texlive-unswcover)
+#. description(texlive-specs-r:texlive-pst-3d)
msgid ""
-"The package an UNSW cover sheet following the 2011 GRS guidelines. It may also (optionally) provide other required sheets such as Originality, Copyright and Authenticity statements.\n"
+"The package provides basic macros that use PSTricks for shadows, tilting and three dimensional representations of text or graphical objects.\n"
"\n"
-"date: 2013-03-22 08:14:02 +0000"
+"date: 2013-07-14 23:18:47 +0000"
msgstr ""
-#. description(texlive-punk-latex)
-msgid ""
-"The package and .fd file provide support for Knuth's punk fonts. That bundle also offers support within LaTeX; the present package is to be preferred.\n"
-"\n"
-"date: 2012-05-30 12:49:05 +0000"
+#. summary(texlive-specs-r:texlive-pst-3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-3dplot)
+msgid "Draw 3D objects in parallel projection, using PSTricks"
msgstr ""
-#. description(texlive-tkz-linknodes)
+#. description(texlive-specs-r:texlive-pst-3dplot)
msgid ""
-"The package arose from a requirement to link the elements of an amsmath align or aligned environment. The package makes use of PGF/TikZ. The package documentation relies on the facilities of the tkz-doc bundle\n"
+"A package using PSTricks to draw a large variety of graphs and plots, including 3D maths functions. Data can be read from external data files, making this package a generic tool for graphing within TeX/LaTeX, without the need for external tools.\n"
"\n"
-"date: 2011-06-05 21:10:23 +0000"
+"date: 2014-03-26 19:10:14 +0000"
msgstr ""
-#. description(texlive-venndiagram)
-msgid ""
-"The package assists generation of simple two- and three-set Venn diagrams for lectures or assignment sheets. The package requires the TikZ package.\n"
-"\n"
-"date: 2012-10-24 13:36:13 +0000"
+#. summary(texlive-specs-r:texlive-pst-3dplot-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-3dplot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-3dplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-3dplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-abspos)
+msgid "Put objects at an absolute position"
msgstr ""
-#. description(texlive-japanese)
+#. description(texlive-specs-r:texlive-pst-abspos)
msgid ""
-"The package behaves in a similar way as if you provided the (non-existent) Japanese option to babel so that you can handle Japanese language text in LaTeX documents. The package requires a Japanese-enabled TeX system, such as pTeX or jTeX.\n"
+"The (PSTricks-related) package provides a command \\pstPutAbs(x,y) to put an object at an arbitrary absolute (or even a relative) position on the page.\n"
"\n"
-"date: 2011-10-29 11:37:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-nonumonpart)
-msgid ""
-"The package bundles the answer to the long-standing FAQ about removing page numbers on \\part pages. The package accepts no options and defines no user commands; the user needs only to load it, and the requirement is met.\n"
-"\n"
-"date: 2011-04-15 10:43:28 +0000"
+#. summary(texlive-specs-r:texlive-pst-abspos-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-abspos"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-abspos-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-abspos"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-am)
+msgid "Simulation of modulation and demodulation"
msgstr ""
-#. description(texlive-inversepath)
+#. description(texlive-specs-r:texlive-pst-am)
msgid ""
-"The package calculates inverse relative paths. Such things may be useful, for example, when writing an auxiliary file to a different directory.\n"
+"The package allows the simulation of the modulated and demodulated amplitude of radio waves. The user may plot curves of modulated signals, wave carrier, signal modulation, signal recovery and signal demodulation.\n"
"\n"
-"date: 2008-08-19 21:32:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-numname)
-msgid ""
-"The package can generate cardinal (one, two, ...) and ordinal (first, second, ...) numbers. The code derives from the memoir class, and is extracted for the convenience of non-users of that class.\n"
-"\n"
-"date: 2010-05-02 22:02:21 +0000"
+#. summary(texlive-specs-r:texlive-pst-am-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-am"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-am-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-am"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-asr)
+msgid "Typeset autosegmental representations for linguists"
msgstr ""
-#. description(texlive-thumby)
+#. description(texlive-specs-r:texlive-pst-asr)
msgid ""
-"The package can generate thumb indexes for your document. It features printing thumb indexes on one- or two-sided pages, along with background- and foreground-color selection and full LaTeX styling of the chapter numbers in the thumb indexes. The height of each thumb index is automatically chosen based on the number of chapters in your document, while the width is chosen by the user. The package is designed to work with the memoir class, and also requires PerlTeX and tikz/\n"
+"The package allows the user to typeset autosegmental representations. It uses the PStricks, and xkeyval packages.\n"
"\n"
-"date: 2010-01-17 10:28:50 +0000"
+"date: 2013-07-15 18:25:07 +0000"
msgstr ""
-#. description(texlive-mathexam)
-msgid ""
-"The package can help you typeset exams (mostly in mathematics and related disciplines where students are required to show their calculations followed by one or more short answers). It provides commands for inclusion of space for calculations, as well as commands for automatic creation of \"answer spaces\". In addition, the package will automatically create page headers and footers, and will let you include instructions and space for students to put their name.\n"
-"\n"
-"date: 2008-08-22 13:19:59 +0000"
+#. summary(texlive-specs-r:texlive-pst-asr-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-asr"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-asr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-asr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-bar)
+msgid "Produces bar charts using pstricks"
msgstr ""
-#. description(texlive-pst-knot)
+#. description(texlive-specs-r:texlive-pst-bar)
msgid ""
-"The package can produce a fair range of knot shapes, with all the standard graphics controls one expects.\n"
+"The package uses pstricks to draw bar charts from data stored in a comma-delimited file. Several types of bar charts may be drawn, and the drawing parameters are highly customizable. No external packages are required except those that are part of the standard pstricks distribution.\n"
"\n"
-"date: 2009-11-14 07:46:33 +0000"
+"date: 2013-07-15 18:25:07 +0000"
msgstr ""
-#. description(texlive-refcheck)
-msgid ""
-"The package checks references in a document, looking for numbered but unlabelled equations, for labels which are not used in the text, for unused bibliography references. It can also display label names in text near corresponding numbers of equations and/or bibliography references.\n"
-"\n"
-"date: 2012-06-26 11:14:08 +0000"
+#. summary(texlive-specs-r:texlive-pst-bar-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-bar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-bar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-bar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-barcode)
+msgid "Print barcodes using PostScript"
msgstr ""
-#. description(texlive-pst-pad)
+#. description(texlive-specs-r:texlive-pst-barcode)
msgid ""
-"The package collects a set of graphical elements based on PStricks that can be used to facilitate display of attachment systems such as two differently shaped surfaces with or without a fluid wedged in between. These macros ease the display of wet adhesion models and common friction systems such as boundary lubrication, elastohydrodynamic lubrication and hydrodynamic lubrication.\n"
+"The pst-barcode package allows printing of barcodes, in a huge variety of formats (see documentation for details). As a pstricks package, the package requires pstricks. The package uses PostScript for calculating the bars. For PDF output use a multi-pass mechansism such as pst-pdf.\n"
"\n"
-"date: 2008-08-22 22:25:16 +0000"
+"date: 2013-10-26 14:10:33 +0000"
msgstr ""
-#. description(texlive-threadcol)
-msgid ""
-"The package combines a document's columns into a PDF \"article thread\". PDF readers that support this mechanism (probably Adobe Acrobat/Reader only) can be instructed to scroll automatically from column to column, which facilitates on- screen reading of two-column documents. Even for single-column documents, threadcol supports the creation of multiple article threads, which help organize discontiguous but logically related regions of text into a form that the user can scroll through as if its contents were contiguous.\n"
-"\n"
-"date: 2013-01-06 13:14:24 +0000"
+#. summary(texlive-specs-r:texlive-pst-barcode-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-barcode"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-barcode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-barcode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-bezier)
+msgid "Draw Bezier curves"
msgstr ""
-#. description(texlive-xetexref)
+#. description(texlive-specs-r:texlive-pst-bezier)
msgid ""
-"The package comprises reference documentation for XeTeX detailing its extended features.\n"
+"The package provides a macro \\psbcurve for drawing a Bezier curve. Provision is made for full control of over all the control points of the curve.\n"
"\n"
-"date: 2013-05-21 19:04:45 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-papermas)
-msgid ""
-"The package computes the number of sheets of paper used by, and the mass of a document. This is useful (for example) when calculating postal charges.\n"
-"\n"
-"date: 2011-08-23 05:18:10 +0000"
+#. summary(texlive-specs-r:texlive-pst-bezier-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-bezier"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-bezier-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-bezier"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-blur)
+msgid "PSTricks package for \"blurred\" shadows"
msgstr ""
-#. description(texlive-ocr-b-outline)
+#. description(texlive-specs-r:texlive-pst-blur)
msgid ""
-"The package contains OCR-B fonts in Type1 and OpenType formats. They were generated from the MetaFont sources of the OCR-B fonts. The metric files are not included here, so that original ocr-b package should also be installed.\n"
+"Pst-blur is a package built for use with PSTricks. It provides macros that apply blurring to the normal shadow function of PSTricks.\n"
"\n"
-"date: 2011-01-07 09:11:51 +0000"
+"date: 2013-07-15 18:28:38 +0000"
msgstr ""
-#. description(texlive-starfont)
-msgid ""
-"The package contains StarFontSans and StarFontSerif, two public-domain astrological fonts designed by Anthony I.P. Owen, and the appropriate macros to use them with TeX and LaTeX. The fonts are supplied in the original TrueType Format and as PostScript font files.\n"
-"\n"
-"date: 2010-09-29 22:35:45 +0000"
+#. summary(texlive-specs-r:texlive-pst-blur-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-blur"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-blur-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-blur"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-bspline)
+msgid "Draw cubic Bspline curves and interpolations"
msgstr ""
-#. description(texlive-physymb)
+#. description(texlive-specs-r:texlive-pst-bspline)
msgid ""
-"The package contains a large collection of small macros that may be useful to physicists and occasionally some mathematicians. It streamlines writing Dirac notation, derivatives, vector variables, unit vectors, scientific notation, elementary particles, and many other things.\n"
+"The package draws uniform, cubic B-spline curves, open and closed, based on a sequence of B-spline control points. There is also code which permits drawing the open or closed cubic Bspline curve interpolating a sequence of points. Graphical output is created using PStricks.\n"
"\n"
-"date: 2011-05-10 09:06:42 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mandi)
-msgid ""
-"The package contains commands for students and teachers of introductory physics. Commands for physical quantities intelligently handle SI units so the user need not do so. There are other features that should make LaTeX easy for introductory physics students.\n"
-"\n"
-"date: 2013-04-10 18:30:37 +0000"
+#. summary(texlive-specs-r:texlive-pst-bspline-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-bspline"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-bspline-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-bspline"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-calendar)
+msgid "Plot calendars in \"fancy\" ways"
msgstr ""
-#. description(texlive-makebarcode)
+#. description(texlive-specs-r:texlive-pst-calendar)
msgid ""
-"The package contains macros for printing various 2/5 bar codes and Code 39 bar codes. The macros do not use fonts but create the bar codes directly using vertical rules. It is therefore possible to vary width to height ratio, ratio of thin and thick bars. The package is therefore convenient for printing ITF bar codes as well as bar codes for identification labels for HP storage media.\n"
+"The package uses pstricks and pst-3d to draw tabular calendars, or calendars on dodecahedra with a month to each face (the package also requires the multido and pst-xkey packages). The package works for years 2000-2099, and has options for calendars in French German and English, but the documentation is not available in English.\n"
"\n"
-"date: 2008-08-22 13:19:59 +0000"
+"date: 2013-07-15 22:15:49 +0000"
msgstr ""
-#. description(texlive-modref)
-msgid ""
-"The package contains macros which allow authors to easily customise how cross-references appear in their document, both in general (across all cross-references) and for particular types of references (identified by a prefix in the reference label), in a very generic manner.\n"
-"\n"
-"date: 2009-02-09 15:57:43 +0000"
+#. summary(texlive-specs-r:texlive-pst-calendar-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-calendar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-calendar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-calendar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-circ)
+msgid "PSTricks package for drawing electric circuits"
msgstr ""
-#. description(texlive-japanese-otf)
+#. description(texlive-specs-r:texlive-pst-circ)
msgid ""
-"The package contains pLaTeX support files and virtual fonts for supporting a wide variety of fonts in LaTeX using the pTeX engine.\n"
+"The package is built using PSTricks and in particular pst-node. It can easily draw current 2-terminal devices and some 3- and 4-terminal devices used in electronic or electric theory. The package's macros are designed with a view to 'logical' representation of circuits, as far as possible, so as to relieve the user of purely graphical considerations when expressing a circuit.\n"
"\n"
-"date: 2013-04-14 08:19:50 +0000"
+"date: 2014-05-18 20:26:36 +0000"
msgstr ""
-#. description(texlive-poltawski)
-msgid ""
-"The package contains the Antykwa Poltawskiego family of fonts in the PostScript Type 1 and OpenType formats. The original font was designed in the twenties of the XX century by the Polish typographer Adam Poltawski(1881-1952). Following the route set out by the Latin Modern and TeX Gyre projects (http://www.gust.org.pl/projects/e-foundry), the Antykwa Poltawskiego digitisation project aims at providing a rich collection of diacritical characters in the attempt to cover as many Latin-based scripts as possible. To our knowledge, the repertoire of characters covers all European languages as well as some other Latin-based alphabets such as Vietnamese and Navajo; at the request of users, recent extensions (following the enhancement of the Latin Modern collection) provide glyphs sufficient for typesetting of romanized transliterations of Arabic and Sanskrit scripts. The Antykwa Poltawskiego family consists of 4 weights (light, normal, medium, bold), each having upright and italic forms a
nd one of 5 design sizes: 6, 8, 10, 12 and 17pt (in the OTF lingo: extended, semiextended, normal, semicondensed, and condensed, respectively). Altogether, the collection comprises 40 font files, containing the same repertoire of 1126 characters. The preliminary version of Antykwa Poltawskiego (antp package) released in 2000 is rendered obsolete by this package.\n"
-"\n"
-"date: 2010-10-12 07:30:05 +0000"
+#. summary(texlive-specs-r:texlive-pst-circ-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-circ"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-r:texlive-pst-circ-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-circ"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-coil)
+msgid "A PSTricks package for coils, etcetera"
msgstr ""
-#. description(xtables-geoip)
+#. description(texlive-specs-r:texlive-pst-coil)
msgid ""
-"The package contains the GeoIP definition files (which IP addresses belong to which country) that are needed for Xtables-addons's xt_geoip module.\n"
+"Pst-coil is a PSTricks based package for coils and zigzags and for coil and zigzag node connections.\n"
"\n"
-"This product includes GeoLite data created by MaxMind, available from http://maxmind.com/.\n"
-"\n"
-"Author(s):\n"
-"---------- \tThe GeoIP data is from MaxMind.com. Please do not contact them for errors with this package."
+"date: 2013-07-15 22:15:49 +0000"
msgstr ""
-#. description(texlive-ipaex-type1)
-msgid ""
-"The package contains the IPAex Fonts converted into Unicode subfonts in Type1 format, which is most suitable for use with the CJK package. Font conversion was done with ttf2pt1.\n"
-"\n"
-"date: 2013-05-18 15:41:16 +0000"
+#. summary(texlive-specs-r:texlive-pst-coil-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-coil"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-coil-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-coil"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-cox)
+msgid "Drawing regular complex polytopes with PSTricks"
msgstr ""
-#. description(texlive-totpages)
+#. description(texlive-specs-r:texlive-pst-cox)
msgid ""
-"The package counts the actual pages in the document (as opposed to reporting the number of the last page, as does lastpage). The counter itself may be shipped out to the DVI file. The package uses the everyshi package for its task.\n"
+"Pst-cox is a PSTricks package for drawing 2-dimensional projections of complex regular polytopes (after the work of Coxeter). The package consists of a macro library for drawing the projections. The complex polytopes appear in the study of the root systems and play a crucial role in many domains related to mathematics and physics. These polytopes have been completely described by Coxeter in his book \"Regular Complex Polytopes\". There exist only a finite numbers of exceptional regular complex polytopes (for example the icosahedron) and some infinite series (for example, one can construct a multi- dimensional analogue of the hypercube in any finite dimension). The library contains two packages. The first, pst-coxcoor, is devoted to the exceptional complex regular polytopes whose coordinates have been pre-computed. The second, pst-coxeterp, is devoted to the infinite series.\n"
"\n"
-"date: 2007-01-18 19:18:05 +0000"
+"date: 2013-07-15 22:15:49 +0000"
msgstr ""
-#. description(texlive-statistik)
-msgid ""
-"The package counts the numbers of pages per chapter, and stores the results in a separate file; the format of the file is selectable.\n"
-"\n"
-"date: 2010-11-05 11:45:12 +0000"
+#. summary(texlive-specs-r:texlive-pst-cox-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-cox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-cox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-cox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-r:texlive-pst-dbicons)
+msgid "Support for drawing ER diagrams"
msgstr ""
-#. description(texlive-texilikecover)
+#. description(texlive-specs-r:texlive-pst-dbicons)
msgid ""
-"The package creates document cover pages, like those that TeXinfo produces.\n"
+"The package provides some useful macros in the database area. The package focusses on typesetting ER-Diagrams in a declarative style, i.e., by positioning some nodes and defining the position of all other nodes relative to them by using the standard database terminology. The PSTricks package is required for using pst-dbicons, but no deep knowledge of PSTricks commands is required (although such knowledge is useful for exploiting the full functionality of the package).\n"
"\n"
-"date: 2008-08-24 08:50:19 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lecturer)
-msgid ""
-"The package creates slides for on-screen presentations based on PDF features without manipulating TeX's typesetting process. The presentation flow relies on PDF's abilities to display content step by step. Features include: - Free positioning of anything anywhere in painted areas on the slide, as well as in the main textblock; - Numerous attributes to control the layout and the presentation flow, from TeX's primitive dimensions to the visibility of steps; - Feature inheritance from global to local settings, with intermediate types; - Basic drawing facilities to produce symbols, e.g., for list items or buttons;\n"
-"- Colors, transparency, shades, and pictures; - Navigation with links, pop-up menus, and customizable bookmarks; - Easy switch between presentation and handout; and - PDF transitions. Besides the traditional documentation, the distribution includes visual documentation and six demo presentations ranging from geometric abstraction to classic style to silly video game. Lecturer is designed to work with all formats, but presently fails with ConTeXt MkIV (because of clashes in management of PDF objects, probably), works only with pdfTeX and LuaTeX for the time being, and requires texapi and yax, both v.1.02.\n"
-"\n"
-"date: 2011-09-11 10:44:24 +0000"
+#. summary(texlive-specs-r:texlive-pst-dbicons-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-dbicons"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-r:texlive-pst-dbicons-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-dbicons"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-diffraction)
+msgid "Print diffraction patterns from various apertures"
msgstr ""
-#. description(texlive-ifnextok)
+#. description(texlive-specs-s:texlive-pst-diffraction)
msgid ""
-"The package deals with the behaviour of the LaTeX internal command \\@ifnextchar, which skips blank spaces. This has the potential to surprise users, since it can produce really unwanted effects. A common example occurs with brackets starting a line following \\\\: the command looks for an optional argument, whereas the user wants the brackets to be printed. The package offers commands and options for modifying this behaviour, maybe limited to certain parts of the document source.\n"
+"The package enables the user to draw (using PSTricks) the diffraction patterns for different geometric forms of apertures for monochromatic light (using PSTricks). The aperture stops can have rectangular, circular or triangular openings. The view of the diffraction may be planar, or three-dimensional. Options available are the dimensions of the aperture under consideration and of the particular optical setting, e.g. the radius in case of an circular opening. Moreover one can choose the wavelength of the light (the associated color will be calculated by the package).\n"
"\n"
-"date: 2011-06-27 18:36:28 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-ode)
-msgid ""
-"The package defines \\pstODEsolve for solving initial value problems for sets of Ordinary Differential Equations (ODE) using the Runge-Kutta-Fehlberg (RKF45) method with automatic step size adjustment. The result is stored as a PostScript object and may be plotted later using macros from other PSTricks packages, such as \\listplot (pst-plot) and \\listplotThreeD (pst-3dplot), or may be further processed by user-defined PostScript procedures. Optionally, the computed state vectors can be written as a table to a text file.\n"
-"\n"
-"date: 2012-09-14 18:13:55 +0000"
+#. summary(texlive-specs-s:texlive-pst-diffraction-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-diffraction"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-diffraction-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-diffraction"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-electricfield)
+msgid "Draw electric field and equipotential lines with PStricks"
msgstr ""
-#. description(texlive-uni-wtal-lin)
+#. description(texlive-specs-s:texlive-pst-electricfield)
msgid ""
-"The package defines a biblatex citation style based on the author-title style of biblatex-dw. The citations are optimised for linguistic studies at the Institute of Linguistics at the Bergische Universitat Wuppertal.\n"
+"The package provides macros to plot electric field and equipotential lines using PStricks. There may be any number of charges which can be placed in a cartesian coordinate system by (x,y) values.\n"
"\n"
-"date: 2013-01-03 10:16:33 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-leading)
-msgid ""
-"The package defines a command \\leading, whose argument is a <length> that specifies the nominal distance between consecutive baselines of typeset text. The command replaces the rather more difficult LaTeX command \\linespread{<ratio>}, where the leading is specified by reference to the font size.\n"
-"\n"
-"date: 2008-12-15 17:32:16 +0000"
+#. summary(texlive-specs-s:texlive-pst-electricfield-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-electricfield"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-electricfield-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-electricfield"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-eps)
+msgid "Create EPS files from PSTricks figures"
msgstr ""
-#. description(texlive-pagerange)
+#. description(texlive-specs-s:texlive-pst-eps)
msgid ""
-"The package defines a command \\pagerange that typesets ranges of page numbers, expanding them (e.g., adding first or large page numbers) and standardising them.\n"
+"Pst-eps is a PSTricks-based package for exporting PSTricks images 'on the fly' to encapsulated PostScript (EPS) image files, which can then be read into a document in the usual way.\n"
"\n"
-"date: 2010-02-04 08:04:58 +0000"
+"date: 2013-07-16 17:52:31 +0000"
msgstr ""
-#. description(texlive-plantslabels)
-msgid ""
-"The package defines a command \\plant, which has three mandatory and seven optional argument. The package uses the labels\n"
-"\n"
-"date: 2012-06-08 15:19:18 +0000"
+#. summary(texlive-specs-s:texlive-pst-eps-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-eps"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-eps-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-eps"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-eucl)
+msgid "Euclidian geometry with pstricks"
msgstr ""
-#. description(texlive-mbenotes)
+#. description(texlive-specs-s:texlive-pst-eucl)
msgid ""
-"The package defines a command \\tabnote, which stores notes for later processing by the command \\thetabnotes, and a corresponding \\imgnote for images. The package is derived from mechanisms in the package endnotes.\n"
+"The package allows the drawing of Euclidean geometric figures using TeX pstricks macros for specifying mathematical constraints. It is thus possible to build point using common transformations or intersections. The use of coordinates is limited to points which controlled the figure.\n"
"\n"
-"date: 2012-09-22 14:17:18 +0000"
+"date: 2014-05-18 09:08:05 +0000"
msgstr ""
-#. description(texlive-lpic)
+#. summary(texlive-specs-s:texlive-pst-eucl-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-eucl"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-eucl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-eucl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-eucl-translation-bg)
+#, fuzzy
+#| msgid "Bulgarian translations for KOffice"
+msgid "Bulgarian translation of the pst-eucl documentation"
+msgstr "Bulharské překlady pro KOffice"
+
+#. description(texlive-specs-s:texlive-pst-eucl-translation-bg)
msgid ""
-"The package defines a convenient interface to put any LaTeX material on top of included graphics. The LaTeX material may also be rotated and typeset on top of a white box overshadowing the graphics. The coordinates of the LaTeX boxes are given relative to the original, unscaled graphics; when the graphics is rescaled, the LaTeX annotations stay at their right places (unless you do something extreme). In a draft mode, the package enables you to draw a coordinate grid over the picture for easy adjustment of positions of the annotations.\n"
+"The pst-eucl package documentation in Bulgarian language - Euclidean Geometry with PSTricks.\n"
"\n"
-"date: 2010-12-23 20:19:38 +0000"
+"date: 2012-08-25 12:37:30 +0000"
msgstr ""
-#. description(texlive-tree-dvips)
-msgid ""
-"The package defines a mechanism for specifying connected trees that uses a tabular environment to generate node positions. The package uses PostScript code, loaded by dvips, so output can only be generated by use of dvips. The package lingmacros.sty defines a few macros for linguists: \\enumsentence for enumerating sentence examples, simple tabular-based non- connected tree macros, and gloss macros.\n"
-"\n"
-"date: 2011-03-14 13:09:23 +0000"
+#. summary(texlive-specs-s:texlive-pst-exa)
+msgid "Typeset PSTricks examples, with code"
msgstr ""
-#. description(texlive-widetable)
+#. description(texlive-specs-s:texlive-pst-exa)
msgid ""
-"The package defines a new environment that, unlike tabularX, typesets a table of specified width by working on the inter- column glue; the tabular cells will all be stretched (or shrunk) according to need. The package will use the e-TeX arithmetic extensions if they are available (they are, in most modern distributions).\n"
+"The (PSTricks-related) package provides an environment PSTexample to put code and output side by side or one above the other.\n"
"\n"
-"date: 2009-11-10 08:00:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-sansmath)
-msgid ""
-"The package defines a new math version sans, and a command \\sansmath that behaves somewhat like \\boldmath\n"
-"\n"
-"date: 2010-04-29 05:59:03 +0000"
+#. summary(texlive-specs-s:texlive-pst-exa-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-exa"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-exa-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-exa"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-fill)
+msgid "Fill or tile areas with PSTricks"
msgstr ""
-#. description(texlive-notes2bib)
+#. description(texlive-specs-s:texlive-pst-fill)
msgid ""
-"The package defines a new type of note, bibnote, which will always be added to the bibliography. The package allows footnotes and endnotes to be moved into the bibliography in the same way. The package can be used with natbib and biblatex as well as plain LaTeX citations. Both sorted and unsorted bibliography styles are supported. The package uses the LaTeX 3 macros and the associated xpackages bundle. It also makes use of the e-TeX extensions (any post-2005 LaTeX distribution will provide these by default, but users of older systems may need to use an elatex command or equivalent). The package relies on LaTeX 3 support from the l3kernel and l3packages bundles.\n"
+"Pst-fill is a PSTricks-based package for filling and tiling areas or characters.\n"
"\n"
-"date: 2012-11-07 11:34:14 +0000"
+"date: 2013-07-16 17:52:31 +0000"
msgstr ""
-#. description(texlive-lkproof)
-msgid ""
-"The package defines a pair of commands \\infer and \\deduce, that are used in constructing LK proof diagrams.\n"
-"\n"
-"date: 2010-10-07 07:27:06 +0000"
+#. summary(texlive-specs-s:texlive-pst-fill-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-fill"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-fill-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-fill"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-fit)
+msgid "Macros for curve fitting"
msgstr ""
-#. description(texlive-verbdef)
+#. description(texlive-specs-s:texlive-pst-fit)
msgid ""
-"The package defines a single command \\verbdef (which has a *- form, like \\verb). \\verbdef will define a robust command whose body expands to verbatim text. By using commands defined by \\verbdef, one can put verbatim text into the arguments of commands; since the defined command is robust, it doesn't matter if the argument is moving. (Full details of syntax and caveats about use are in comments in the file itself.)\n"
+"The package uses PSTricks to fit curves to: Linear Functions; Power Functions; exp Function; Log_{10} and Log_e functions; Recip; Kings Law data; Gaussian; and 4th order Polynomial\n"
"\n"
-"date: 2010-03-09 12:13:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tabulary)
-msgid ""
-"The package defines a tabular*-like tabulary environment, taking a 'total width' argument as well as the column specifications. It then defines column types L, C, R and J for variable width columns (\\raggedright', \\centering, \\raggedleft, and normally justified). In contrast to tabularx's X columns, the width of each column is weighted according to the natural width of the widest cell in the column.\n"
-"\n"
-"date: 2009-10-09 22:51:28 +0000"
+#. summary(texlive-specs-s:texlive-pst-fit-doc)
+msgid "Documentation for texlive-pst-fit"
msgstr ""
-#. description(texlive-parselines)
-msgid ""
-"The package defines an environment \"parse lines\" which processes each line of an environment with a macro. An example of shading the lines of an environment is given.\n"
-"\n"
-"date: 2011-02-19 15:41:47 +0000"
+#. description(texlive-specs-s:texlive-pst-fit-doc)
+msgid "This package includes the documentation for texlive-pst-fit"
msgstr ""
-#. description(texlive-xcomment)
-msgid ""
-"The package defines an environment that only typesets specified environments within its scope. So, for example, if you want nothing but the figure and table environments in your document, you can enclose the whole document with an xcomment environment that excludes everything but. This is a lot easier than excluding the chunks of text between the environments you want, or creating an entire document containing only those environments. The package was previously part of the seminar bundle for typesetting presentations.\n"
-"\n"
-"date: 2010-09-08 10:33:34 +0000"
+#. summary(texlive-specs-s:texlive-pst-fr3d)
+msgid "Draw 3-dimensional framed boxes using PSTricks"
msgstr ""
-#. description(texlive-thmbox)
+#. description(texlive-specs-s:texlive-pst-fr3d)
msgid ""
-"The package defines an environment thmbox that presents theorems, definitions and similar objects in boxes decorated with frames and various aesthetic features. The standard macro \\newtheorem may be redefined to use the environment.\n"
+"A package using PSTricks to draw three dimensional framed boxes using a macro \\PstFrameBoxThreeD. The macro is especially useful for drawing 3d-seeming buttons.\n"
"\n"
-"date: 2009-03-25 07:55:29 +0000"
+"date: 2013-07-16 18:22:47 +0000"
msgstr ""
-#. description(texlive-ktv-texdata)
-msgid ""
-"The package defines an exercice environment which numbers every exercise, and a command \\get to extract a collection whose argument is a comma-separated set of exercise index numbers. While the package was designed for teachers constructing tables of exercises, it plainly has more general application.\n"
-"\n"
-"date: 2012-04-26 10:50:58 +0000"
+#. summary(texlive-specs-s:texlive-pst-fr3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-fr3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-fr3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-fr3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-fractal)
+msgid "Draw fractal sets using PSTricks"
msgstr ""
-#. description(texlive-outline)
+#. description(texlive-specs-s:texlive-pst-fractal)
msgid ""
-"The package defines an outline environment, which provides facilities similar to enumerate, but up to 6 levels deep.\n"
+"The package uses PSTricks to draw the Julia and Mandelbrot sets, the Sierpinski triangle, Koch flake, and Apollonius Circle as well as fractal trees (which need not be balanced) with a variety of different parameters (including varying numbers of iterations). The package uses the pst-xkey package, part of the xkeyval distribution.\n"
"\n"
-"date: 2010-05-19 16:21:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-menu)
-msgid ""
-"The package defines command \\menu which assists typesetting of a path through a program's menu.\n"
-"\n"
-"date: 2009-03-06 21:55:22 +0000"
+#. summary(texlive-specs-s:texlive-pst-fractal-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-fractal"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-fractal-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-fractal"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-fun)
+msgid "Draw \"funny\" objects with PSTricks"
msgstr ""
-#. description(texlive-mlist)
+#. description(texlive-specs-s:texlive-pst-fun)
msgid ""
-"The package defines commands that create macros for typesetting vectors, matrices and functions, in a logical way. For example, logical indexing can then be used to refer to elements or arguments without hard-coding the symbols in the document.\n"
+"This is a PSTricks related package for drawing funny objects, like ant, bird, fish, kangaroo, ... Such objects may be useful for testing other PSTricks macros and/or packages. (Or they can be used for fun...)\n"
"\n"
-"date: 2009-07-04 11:21:27 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-reotex)
-msgid ""
-"The package defines macros and other utilities to design Reo Circuits. The package require PGF/TikZ support.\n"
-"\n"
-"date: 2012-01-11 07:56:14 +0000"
+#. summary(texlive-specs-s:texlive-pst-fun-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-fun"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-fun-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-fun"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-func)
+msgid "PSTricks package for plotting mathematical functions"
msgstr ""
-#. description(texlive-patch)
+#. description(texlive-specs-s:texlive-pst-func)
msgid ""
-"The package defines macros that allow patching of existing commands, specifying those parts of the existing macro to be replaced, along with the replacements. Thus it provides more sophisticated manipulation than a package like patchcmd, which only permits modification by adding commands at the beginning or end of an existing definition. The package is distributed in a relative of LaTeX doc format: it will run unmodified, though it benefits from docstrip treatment.\n"
+"The package is built for use with PSTricks. It provides macros for plotting and manipulating various mathematical functions: polynomials and their derivatives f(x)=an*x^n+an-1*x^(n- 1)+...+a0 defined by the coefficients a0 a1 a2 ... and the derivative order; the Fourier sum f(x) = a0/2+a1cos(omega x)+...+b1sin(omega x)+... defined by the coefficients a0 a1 a2 ... b1 b2 b3 ...; the Bessel function defined by its order; the Gauss function defined by sigma and mu; Bezier curves from order 1 (two control points) to order 9 (10 control points); the superellipse function (the Lame curve); Chebyshev polynomials of the first and second kind; the Thomae (or popcorn) function; the Weierstrass function; various integration-derived functions; normal, binomial, poisson, gamma, chi-squared, student's t, F, beta, Cauchy and Weibull distribution functions and the Lorenz curve; the zeroes of a function, or the intermediate point of two functions; the Vasicek function for describing the evolution of
interest rates; and implicit functions. The plots may be generated as volumes of rotation about the X-axis, as well.\n"
"\n"
-"date: 2012-01-13 10:54:55 +0000"
+"date: 2014-05-22 15:35:02 +0000"
msgstr ""
-#. description(texlive-paresse)
-msgid ""
-"The package defines macros using SS to type greek letters. so that the user may (for example) type SSa to get the effect of $\\alpha$.\n"
-"\n"
-"date: 2013-02-16 12:58:07 +0000"
+#. summary(texlive-specs-s:texlive-pst-func-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-func"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-func-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-func"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-gantt)
+msgid "Draw GANTT charts with pstricks"
msgstr ""
-#. description(texlive-statex2)
+#. description(texlive-specs-s:texlive-pst-gantt)
msgid ""
-"The package defines many macros for items of significance in statistical presentations. It represents a syntax-incompatible upgrade of statex.\n"
+"The package uses PSTricks to draw GANTT charts, which are a kind of bar chart that displays a project schedule. The package requires the pstricks apparatus, of course.\n"
"\n"
-"date: 2011-09-14 16:03:50 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-niceframe)
+#. summary(texlive-specs-s:texlive-pst-gantt-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-gantt"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-gantt-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-gantt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-geo)
+#, fuzzy
+#| msgid "Geographical Information System"
+msgid "Geographical Projections"
+msgstr "GIS"
+
+#. description(texlive-specs-s:texlive-pst-geo)
msgid ""
-"The package defines means of drawing frames around boxes, using dingbat fonts. Some (Metafont) font sources are included; the fonts are available separately in Type 1 format.\n"
+"The package offers a set of PSTricks related packages for various cartographic projections of the terrestrial sphere. The package pst-map2d provides conventional projections such as Mercator, Lambert, cylindrical, etc. The package pst-map3d treats representation in three dimensions of the terrestrial sphere. Packages pst-map2dII and pst-map3dII allow use of the CIA World DataBank II. Various parameters of the packages allow for choice of the level of the detail and the layouts possible (cities, borders, rivers etc). Substantial data files are provided, in an (internally) compressed format. Decompression happens on-the-fly as a document using the data is displayed, printed or converted to PDF format. A Perl script is provided for the user to do the decompression, if the need should arise.\n"
"\n"
-"date: 2011-06-16 18:35:20 +0000"
+"date: 2013-12-02 15:58:07 +0000"
msgstr ""
-#. description(texlive-iitem)
-msgid ""
-"The package defines multiple level lists within one list-like environment. instead of writing \\begin{enumerate} \\item 1 \\begin{enumerate} \\item 2 \\begin{enumerate} \\item 3 \\begin{enumerate} \\item 4 \\end{enumerate} \\end{enumerate} \\item 2.1 \\end{enumerate} \\item 1.1 \\begin{enumerate} \\item 2 \\end{enumerate} \\end{enumerate} this package allows you to write \\begin{enumerate} \\item 1 \\iitem 2 \\iiitem 3 \\ivtem 4 \\iitem 2.1 \\item 1.1 \\iitem 2 \\end{enumerate}\n"
-"\n"
-"date: 2013-04-02 13:23:02 +0000"
+#. summary(texlive-specs-s:texlive-pst-geo-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-geo"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-geo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-geo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-ghsb)
+msgid "Package pst-ghsb"
+msgstr "Balíček pst-ghsb"
+
+#. description(texlive-specs-s:texlive-pst-ghsb)
+msgid "The pst-ghsb package"
msgstr ""
-#. description(texlive-physics)
-msgid ""
-"The package defines simple and flexible macros for typesetting equations in the languages of vector calculus and linear algebra, using Dirac notation.\n"
-"\n"
-"date: 2012-12-20 16:31:55 +0000"
+#. summary(texlive-specs-s:texlive-pst-ghsb-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-ghsb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-ghsb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-ghsb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-gr3d)
+msgid "Three dimensional grids with PSTricks"
msgstr ""
-#. description(texlive-tqft)
+#. description(texlive-specs-s:texlive-pst-gr3d)
msgid ""
-"The package defines some node shapes useful for drawing TQFT diagrams with TikZ/PGF. That is, it defines highly customisable shapes that look like cobordisms between circles, such as those used in TQFT and other mathematical diagrams.\n"
+"This PSTricks package provides a command \\PstGridThreeD that will draw a three dimensional grid, offering a number of options for its appearance.\n"
"\n"
-"date: 2011-10-01 22:21:09 +0000"
+"date: 2013-07-16 18:34:34 +0000"
msgstr ""
-#. description(texlive-svgcolor)
-msgid ""
-"The package defines the W3C Scalable Vector Graphics (SVG) colour names for use with both the color and PSTricks packages.\n"
-"\n"
-"date: 2006-08-27 15:41:02 +0000"
+#. summary(texlive-specs-s:texlive-pst-gr3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-gr3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-gr3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-gr3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-grad)
+msgid "Filling with colour gradients, using PStricks"
msgstr ""
-#. description(texlive-labelcas)
+#. description(texlive-specs-s:texlive-pst-grad)
msgid ""
-"The package defines two commands: - \\eachlabelcase, which distinguishes whether a set of labels is defined, and for each label either queues action accordingly, or appends the action to a macro; and - \\lotlabelcase, which takes a comma-separated list of label names, and distinguishes the resulting action on whether all were defined, whether none were defined, whether not all were defined, or whether the lest is empty (again, the action resulting from \\lotlabelcase may be written to a macro).\n"
+"The package fills with colour gradients, using PSTricks. The RGB, CMYK and HSB models are supported. Other colour gradient mechanisms are to be found in package pst-slpe.\n"
"\n"
-"date: 2007-03-08 20:58:53 +0000"
+"date: 2013-07-16 18:34:34 +0000"
msgstr ""
-#. description(texlive-mdframed)
-msgid ""
-"The package develops the facilities of framed in providing breakable framed and coloured boxes. The user may instruct the package to perform its operations using default LaTeX commands, PStricks or TikZ.\n"
-"\n"
-"date: 2012-09-21 08:33:40 +0000"
+#. summary(texlive-specs-s:texlive-pst-grad-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-grad"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-grad-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-grad"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-graphicx)
+msgid "A pstricks-compatible graphicx for use with Plain TeX"
msgstr ""
-#. description(texlive-verse)
+#. description(texlive-specs-s:texlive-pst-graphicx)
msgid ""
-"The package documentation discusses approaches to the problem; the package is strong on layout, from simple alternate-line indentation to the Mouse's tale from Alice in Wonderland.\n"
+"The package provides a version of graphicx that avoids loading the graphics bundle's (original) keyval package, which clashes with pstricks' use of xkeyval.\n"
"\n"
-"date: 2009-09-04 10:14:45 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-psbao)
-msgid ""
-"The package draws Bao diagrams in LaTeX. The package is a development of psgo, and uses PSTricks to draw the diagrams.\n"
-"\n"
-"date: 2008-11-15 11:33:11 +0000"
+#. summary(texlive-specs-s:texlive-pst-graphicx-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-graphicx"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-s:texlive-pst-graphicx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-graphicx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-infixplot)
+msgid "Using pstricks plotting capacities with infix expressions rather than RPN"
msgstr ""
-#. description(texlive-pst-gantt)
+#. description(texlive-specs-s:texlive-pst-infixplot)
msgid ""
-"The package draws GANTT charts, which are a kind of bar chart that displays a project schedule. The package requires the pstricks apparatus, of course.\n"
+"Plotting functions with pst-plot is very powerful but sometimes difficult to learn since the syntax of \\psplot and \\parametricplot requires some PostScript knowledge. The infix- RPN and pst-infixplot styles simplify the usage of pst-plot for the beginner, providing macro commands that convert natural mathematical expressions to PostScript syntax.\n"
"\n"
-"date: 2010-02-24 20:46:55 +0000"
+"date: 2013-07-16 18:34:34 +0000"
msgstr ""
-#. description(texlive-pgfmolbio)
-msgid ""
-"The package draws graphs typically found in molecular biology texts. Currently, the package contains modules for drawing DNA sequencing chromatograms and protein domain diagrams.\n"
-"\n"
-"date: 2012-10-04 11:44:39 +0000"
+#. summary(texlive-specs-s:texlive-pst-infixplot-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-infixplot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-infixplot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-infixplot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-intersect)
+msgid "Compute intersections of arbitrary curves"
msgstr ""
-#. description(texlive-pst-bspline)
+#. description(texlive-specs-s:texlive-pst-intersect)
msgid ""
-"The package draws uniform, cubic B-spline curves, open and closed, based on a sequence of B-spline control points. There is also code which permits drawing the open or closed cubic Bspline curve interpolating a sequence of points. Graphical output is created using PStricks.\n"
+"The package computes the intersections between arbitrary Postscript paths or Bezier curves, using the Bezier clipping algorithm.\n"
"\n"
-"date: 2012-03-07 19:35:45 +0000"
+"date: 2014-03-17 07:20:02 +0000"
msgstr ""
-#. description(texlive-pst-node)
-msgid ""
-"The package enables the user to connect information, and to place labels, without knowing (in advance) the actual positions of the items to be connected, or where the connecting line should go. The macros are useful for making graphs and trees, mathematical diagrams, linguistic syntax diagrams, and so on. The package contents were previously distributed as a part of the pstricks base distribution.\n"
-"\n"
-"date: 2013-04-14 08:19:50 +0000"
+#. summary(texlive-specs-s:texlive-pst-intersect-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-intersect"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-intersect-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-intersect"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-jtree)
+msgid "Typeset complex trees for linguists"
msgstr ""
-#. description(texlive-luamplib)
+#. description(texlive-specs-s:texlive-pst-jtree)
msgid ""
-"The package enables the user to directly incorporate MetaPost diagrams into a document, using LuaTeX's built-in MetaPost library. The facility is only available in PDF mode.\n"
+"jTree uses PStricks to enable linguists to typeset complex trees. The package requires use of PStricks (of course) and xkeyval packages. jTree is a development of, and replacement for, the jftree package, which is no longer available.\n"
"\n"
-"date: 2013-05-06 20:23:37 +0000"
+"date: 2012-08-25 12:37:30 +0000"
msgstr ""
-#. description(texlive-pst-pulley)
-msgid ""
-"The package enables the user to draw pulley systems with up to 6 pulleys. The pulley diagrams are labelled with the physical properties of the system. The package uses pstricks, and requires a several pstricks-related packages.\n"
-"\n"
-"date: 2012-01-18 11:22:27 +0000"
+#. summary(texlive-specs-s:texlive-pst-jtree-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-jtree"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-jtree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-jtree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-knot)
+msgid "PSTricks package for displaying knots"
msgstr ""
-#. description(texlive-pst-diffraction)
+#. description(texlive-specs-s:texlive-pst-knot)
msgid ""
-"The package enables the user to draw the diffraction patterns for different geometric forms of apertures for monochromatic light. The aperture stops can have rectangular, circular or triangular openings. The view of the diffraction may be planar, or three-dimensional. Options available are the dimensions of the aperture under consideration and of the particular optical setting, e.g. the radius in case of an circular opening. Moreover one can choose the wavelength of the light (the associated color will be calculated by the package).\n"
+"The package can produce a fair range of knot shapes, with all the standard graphics controls one expects.\n"
"\n"
-"date: 2008-09-03 17:49:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-othelloboard)
-msgid ""
-"The package enables the user to generate high-quality Othello (also known as Reversi) board diagrams of any size. The diagrams support annotations, including full game transcripts. Automated board or transcript creation, from plain text formats standard to WZebra (and other programs) is also supported.\n"
-"\n"
-"date: 2011-08-19 06:35:26 +0000"
+#. summary(texlive-specs-s:texlive-pst-knot-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-knot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-knot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-knot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-labo)
+msgid "Draw objects for Chemistry laboratories"
msgstr ""
-#. description(texlive-mversion)
+#. description(texlive-specs-s:texlive-pst-labo)
msgid ""
-"The package enables the user to keep track of different versions of a latex document. The command \\version prints the version and build numbers; each time you compile your document, the build number is increased by one. By placing \\version in the header or footer, each page can be marked with the unique build number describing the progress of your document.\n"
+"Pst-labo is a PSTricks related package for drawing basic and complex chemical objects. The documentation of the package is illuminated with plenty of illustrations together with their source code, making it an easy read.\n"
"\n"
-"date: 2013-03-13 12:37:29 +0000"
+"date: 2011-09-27 18:18:06 +0000"
msgstr ""
-#. description(texlive-imakeidx)
-msgid ""
-"The package enables the user to produce and typeset one or more indexes simultaneously with a document. The package is known to work in LaTeX documents processed with pdflatex, xelatatex and lualatex. If makeindex is used for processing the index entries, no particular setting up is needed when TeX Live is used. Using xindy or other programs it is necessary to enable shell escape; shell escape is also needed if splitindex is used.\n"
-"\n"
-"date: 2012-11-14 10:11:04 +0000"
+#. summary(texlive-specs-s:texlive-pst-labo-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-labo"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-labo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-labo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-layout)
+msgid "Page layout macros based on PStricks packages"
msgstr ""
-#. description(texlive-texilikechaps)
+#. description(texlive-specs-s:texlive-pst-layout)
msgid ""
-"The package enables the user to reduce the size of the rather large chapter headings in standard classes into a texi-like smaller format. Details of the format may be controlled with internal commands.\n"
+"The package provides a means of creating elaborate (\"pseudo- tabular\") layouts of material, typically to be overlaid on an included graphic. The package requires a recent version of the package pst-node and some other pstricks-related material.\n"
"\n"
-"date: 2012-12-16 18:31:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xcookybooky)
-msgid ""
-"The package enables the user to typeset recipes, which could be greater than one page. Above the recipe text two (optional) pictures can be displayed. Other features are recipe name, energy content, portions, preparation and baking time, baking temperatures, recipe source and of course preparation steps and required ingredients. At the bottom you may insert an optional hint. The package depends on the Emerald fonts.\n"
-"\n"
-"date: 2013-03-13 14:44:34 +0000"
+#. summary(texlive-specs-s:texlive-pst-layout-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-layout"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-layout-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-layout"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-lens)
+msgid "Lenses with PSTricks"
msgstr ""
-#. description(texlive-rcs-multi)
+#. description(texlive-specs-s:texlive-pst-lens)
msgid ""
-"The package enables the user to typeset version control information provided by RCS keywords (e.g., $ID: ... $) in LaTeX documents that contain multiple TeX files. The package is based on the author's svn-multi package.\n"
+"This PSTricks package provides a really rather simple command \\PstLens that will draw a lens. Command parameters provide a remarkable range of effects.\n"
"\n"
-"date: 2011-04-03 14:27:03 +0000"
+"date: 2012-08-25 12:37:30 +0000"
msgstr ""
-#. description(texlive-vocaltract)
-msgid ""
-"The package enables the user to visualise the vocal tract. The vocal tract (in the package) is manipulated by a vector of articulation parameters according to the S. Maeda model. Animation may be achieved by providing a sequence of vectors over time (e.g., from Matlab). A sequence of vectors for certain German phonemes is embedded in the package, which allows for animation when no other vector is available. The package's graphics are produced using pstricks.\n"
-"\n"
-"date: 2012-03-13 10:09:15 +0000"
+#. summary(texlive-specs-s:texlive-pst-lens-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-lens"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-lens-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-lens"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-light3d)
+msgid "Three dimensional lighting effects (PSTricks)"
msgstr ""
-#. description(texlive-zwgetfdate)
+#. description(texlive-specs-s:texlive-pst-light3d)
msgid ""
-"The package enables to fetch dates of used packages and files and provide such information in macros. It is useful for automatic obtaining the date of a package being documented, mainly if you do not use doc/docstrip.\n"
+"A PSTricks package for three dimensional lighting effects on characters and PSTricks graphics, like lines, curves, plots, ...\n"
"\n"
-"date: 2008-08-24 12:29:08 +0000"
+"date: 2012-08-25 12:43:44 +0000"
msgstr ""
-#. description(texlive-productbox)
-msgid ""
-"The package enables typesetting of a three-dimensional product box. This product box can be rendered as it is standing on a surface and some light is shed onto it. Alternatively it can be typeset as a wireframe to be cut out and glued together. This will lead to a physical product box. The package requires the package pgf and TikZ.\n"
-"\n"
-"date: 2010-12-30 00:06:48 +0000"
+#. summary(texlive-specs-s:texlive-pst-light3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-light3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-light3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-light3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-magneticfield)
+msgid "Plotting a magnetic field with PSTricks"
msgstr ""
-#. description(texlive-python)
+#. description(texlive-specs-s:texlive-pst-magneticfield)
msgid ""
-"The package enables you to embed Python code in LaTeX, and insert the script's output in the document.\n"
+"pst-magneticfield is a PSTricks related package to draw the magnetic field lines of Helmholtz coils in a two or three dimensional view. There are several parameters to create a different output. For more informations or some examples read the documentation of the package.\n"
"\n"
-"date: 2012-07-03 09:28:15 +0000"
+"date: 2012-08-25 12:37:30 +0000"
msgstr ""
-#. description(texlive-longnamefilelist)
-msgid ""
-"The package equips LaTeX's \\listfiles command with an optional argument for the number of characters in the longest base filename. This way you get a neatly aligned file list even when it contains files whose base names have more than 8 characters. The package can be combined with the myfilist package as explained in the documentation.\n"
-"\n"
-"date: 2012-10-01 06:11:57 +0000"
+#. summary(texlive-specs-s:texlive-pst-magneticfield-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-magneticfield"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-magneticfield-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-magneticfield"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-math)
+msgid "Enhancement of PostScript math operators to use with pstricks"
msgstr ""
-#. description(texlive-tikz-inet)
+#. description(texlive-specs-s:texlive-pst-math)
msgid ""
-"The package extends TikZ with macros to draw interaction nets.\n"
+"PostScript lacks a lot of basic operators such as tan, acos, asin, cosh, sinh, tanh, acosh, asinh, atanh, exp (with e base). Also (oddly) cos and sin use arguments in degrees. Pst-math provides all those operators in a header file pst-math.pro with wrappers pst-math.sty and pst-math.tex. In addition, sinc, gauss, gammaln and bessel are implemented (only partially for the latter). The package is designed essentially to work with pst-plot but can be used in whatever PS code (such as pstricks SpecialCoor \"!\", which is useful for placing labels). The package also provides a routine SIMPSON for numerical integration and a solver of linear equation systems.\n"
"\n"
-"date: 2008-08-24 12:43:48 +0000"
+"date: 2013-09-30 09:46:09 +0000"
msgstr ""
-#. description(texlive-pgfkeyx)
-msgid ""
-"The package extends and improves the robustness of the pgfkeys package. In particular, it can deal with active comma, equality sign, and slash in key parsing. The difficulty with active characters has long been a problem with the pgfkeys package. The package also introduces handlers beyond those that pgfkeys can offer.\n"
-"\n"
-"date: 2012-04-21 21:54:26 +0000"
+#. summary(texlive-specs-s:texlive-pst-math-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-math"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-math-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-math"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-mirror)
+msgid "Images on a spherical mirror"
msgstr ""
-#. description(texlive-nicefilelist)
+#. description(texlive-specs-s:texlive-pst-mirror)
msgid ""
-"The package extends longnamefilelist, keeping separate columns for date, version and \"caption\" (the caption now separately listed). Alignment is not disturbed by short file name extensions, such as \".fd\". The package is not compatible with longnamefilelist: users need to re-read the documentation.\n"
+"The package provides commands and supporting PostScript material for drawing images as if reflected by a spherical mirror.\n"
"\n"
-"date: 2012-12-13 10:39:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-smartref)
-msgid ""
-"The package extends the LaTeX labelling system: whenever a label is set, the values of counters (selected by the user) are recorded, along with the label. The value of these counters can be recalled with a command similar to \\pageref. The package also adds commands \\s[name]ref (for each counter [name] that the user has selected); these commands display something only if the value of the [name] counter is changed from when the label was set. Many commands are provided to serve as a macro programming environment for using the extended labels.\n"
-"\n"
-"date: 2010-11-01 14:44:19 +0000"
+#. summary(texlive-specs-s:texlive-pst-mirror-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-mirror"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-mirror-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-mirror"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-node)
+msgid "Nodes and node connections in pstricks"
msgstr ""
-#. description(texlive-tikzscale)
+#. description(texlive-specs-s:texlive-pst-node)
msgid ""
-"The package extends the \\includegraphics command to support tikzpictures. It allows scaling of TikZ images and PGFPlots to a given width or height without changing the text size.\n"
+"The package enables the user to connect information, and to place labels, without knowing (in advance) the actual positions of the items to be connected, or where the connecting line should go. The macros are useful for making graphs and trees, mathematical diagrams, linguistic syntax diagrams, and so on. The package contents were previously distributed as a part of the pstricks base distribution; the package serves as an extension to PSTricks.\n"
"\n"
-"date: 2013-05-22 08:58:45 +0000"
+"date: 2014-03-26 08:37:24 +0000"
msgstr ""
-#. description(texlive-xwatermark)
-msgid ""
-"The package extends the author's draftmark and the watermark packages.\n"
-"\n"
-"date: 2012-10-26 08:22:27 +0000"
+#. summary(texlive-specs-s:texlive-pst-node-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-node"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-node-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-node"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-ob3d)
+msgid "Three dimensional objects using PSTricks"
msgstr ""
-#. description(texlive-xpicture)
+#. description(texlive-specs-s:texlive-pst-ob3d)
msgid ""
-"The package extends the facilities of the pict2e and the curve2e packages, providing extra reference frames, conic section curves, graphs of elementary functions and other parametric curves.\n"
+"The package uses PSTricks to provide basic three-dimensional objects. As yet, only cubes (which can be deformed to rectangular parallelipipeds) and dies (which are only a special kind of cubes) are defined.\n"
"\n"
-"date: 2013-01-08 09:49:23 +0000"
+"date: 2012-06-18 11:20:48 +0000"
msgstr ""
-#. description(texlive-ifthenx)
-msgid ""
-"The package extends the ifthen package, providing extra predicates for the package's \\ifthenelse command. The package is complementary to xifthen, in that they provide different facilities; the two may be loaded in the same document, as long as xifthen is loaded first.\n"
-"\n"
-"date: 2012-04-01 21:59:58 +0000"
+#. summary(texlive-specs-s:texlive-pst-ob3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-ob3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-ob3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-ob3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-ode)
+msgid "Solving initial value problems for sets of Ordinary Differential Equations"
msgstr ""
-#. description(texlive-ocgx)
+#. description(texlive-specs-s:texlive-pst-ode)
msgid ""
-"The package extends the ocg package, which allows you to create OCGs (Optional Content Groups) in PDF documents. (The ocg package is distributed as part of Asymptote.) Every OCG includes TeX material into a layer of the PDF file. Each of these layers can be displayed or not. Links can enable or disable the display of OCGs. The ocgx package does not use Javascript embedded in the PDF document to enable (to show) or disable (to hide) OCGs.\n"
+"The package defines \\pstODEsolve for solving initial value problems for sets of Ordinary Differential Equations (ODE) using the Runge-Kutta-Fehlberg (RKF45) method with automatic step size adjustment. The result is stored as a PostScript object and may be plotted later using macros from other PSTricks packages, such as \\listplot (pst-plot) and \\listplotThreeD (pst-3dplot), or may be further processed by user-defined PostScript procedures. Optionally, the computed state vectors can be written as a table to a text file.\n"
"\n"
-"date: 2012-12-10 09:44:43 +0000"
+"date: 2014-03-27 18:23:13 +0000"
msgstr ""
-#. description(texlive-lua2dox)
-msgid ""
-"The package extends the well-known C-like language autodoc tool, doxygen, to read and document lua code. In use, you edit and test your code and periodically run the autodoc tool to update the documentation, which may be viewed via an html browser. Autodoc tools can read the code well enough to find function/... declarations and document them. If the code also contains appropriatly formatted \"magic comments\", the tool can use them to supplement the documentation. The package is a first prototype of a planned TeX2DoX tool (in development), which will process joint (La)TeX/lua documents.\n"
-"\n"
-"date: 2013-02-07 13:27:08 +0000"
+#. summary(texlive-specs-s:texlive-pst-ode-doc)
+msgid "Documentation for texlive-pst-ode"
msgstr ""
-#. description(texlive-pst-vowel)
-msgid ""
-"The package extends vowel.sty (distributed as part of the tipa bundle) by allowing the user to draw arrows between vowels to show relationships such as diphthong membership. The package depends on use of pstricks.\n"
-"\n"
-"date: 2012-01-28 07:48:38 +0000"
+#. description(texlive-specs-s:texlive-pst-ode-doc)
+msgid "This package includes the documentation for texlive-pst-ode"
msgstr ""
-#. description(texlive-librarian)
-msgid ""
-"The package extracts information in bib files, makes it available in the current document, and sorts lists of entries according to that information and the user's specifications. Citation and bibliography styles can then be written directly in TeX, without any use of BibTeX. Creating references thus depends entirely on the user's skill in TeX. The package works with all formats that use plain TeX's basic syntactic sugar; the distribution includes a third-party file for ConTeXt and a style file for LaTeX. As an example of use, an Author (Year) style is given in a separate file and explained in the documentation.\n"
-"\n"
-"date: 2010-06-25 06:56:08 +0000"
+#. summary(texlive-specs-s:texlive-pst-optexp)
+msgid "Drawing optical experimental setups"
msgstr ""
-#. description(texlive-schemata)
+#. description(texlive-specs-s:texlive-pst-optexp)
msgid ""
-"The package facilitates the creation of topical schemata, outlines that use braces (or facsimiles thereof) to illustrate the breakdown of concepts and categories in Scholastic thought from late medieval and early modern periods.\n"
+"The package is a collection of optical components that facilitate easy sketching of optical experimental setups. The package uses PSTricks for its output. A wide range of free-ray and fibre components is provided, the alignment, positioning and labelling of which can be achieved in very simple and flexible ways. The components may be connected with fibers or beams, and realistic raytraced beam paths are also possible.\n"
"\n"
-"date: 2013-03-12 19:16:10 +0000"
+"date: 2014-02-28 19:10:22 +0000"
msgstr ""
-#. description(texlive-xesearch)
-msgid ""
-"The package finds strings (e.g. (parts of) words or phrases) and manipulates them (apply any macro), thus turning each word or phrase into a possible command. It is written in plain XeTeX and should thus work with any format (it is known to work with LaTeX and ConTeXt). The main application for the moment is XeIndex, an automatic index for XeLaTeX, but examples are given of simple use to check spelling, count words, and highlight syntax of programming languages.\n"
-"\n"
-"date: 2009-11-18 11:12:09 +0000"
+#. summary(texlive-specs-s:texlive-pst-optexp-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-optexp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-optexp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-optexp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-optic)
+msgid "Drawing optics diagrams"
msgstr ""
-#. description(texlive-mla-paper)
+#. description(texlive-specs-s:texlive-pst-optic)
msgid ""
-"The package formats articles using the MLA style. The aim is that students and other academics in the humanities should be able to typeset their materials, properly, with minimal effort on their part.\n"
+"A package for drawing both reflective and refractive optics diagrams. The package requires pstricks later than version 1.10.\n"
"\n"
-"date: 2010-12-30 14:21:17 +0000"
+"date: 2012-06-18 11:20:48 +0000"
msgstr ""
-#. description(texlive-regexpatch)
-msgid ""
-"The package generalises the macro patching commands provided by P. Lehmann's etoolbox. The difference between this package and its sibling xpatch is that this package sports a very powerful \\regexpatchcmd based on the l3regex module of the LaTeX3 experimental packages.\n"
-"\n"
-"date: 2013-03-28 16:44:41 +0000"
+#. summary(texlive-specs-s:texlive-pst-optic-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-optic"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-optic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-optic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-osci)
+msgid "Oscgons with PSTricks"
msgstr ""
-#. description(texlive-xpatch)
+#. description(texlive-specs-s:texlive-pst-osci)
msgid ""
-"The package generalises the macro patching commands provided by Philipp Lehmann's etoolbox.\n"
+"pst-osci is a PSTricks package enables you to produce oscilloscope \"screen shots\". Three channels can be used to represent the most common signals (damped or not): namely sinusoidal, rectangular, triangular, dog's tooth (left and right oriented). The third channel allows you to add, to subtract or to multiply the two other signals. Lissajous diagrams (XY-mode) can also be obtained.\n"
"\n"
-"date: 2012-03-12 17:26:56 +0000"
+"date: 2012-05-30 12:49:05 +0000"
msgstr ""
-#. description(texlive-multirow)
-msgid ""
-"The package has a lot of flexibility, including an option for specifying an entry at the \"natural\" width of its text. The package is distributed with the bigdelim and bigstrut packages, which can be used to advantage with \\multirow cells.\n"
-"\n"
-"date: 2010-02-27 21:08:17 +0000"
+#. summary(texlive-specs-s:texlive-pst-osci-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-osci"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-osci-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-osci"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-ovl)
+msgid "Create and manage graphical overlays"
msgstr ""
-#. description(texlive-pdfx)
+#. description(texlive-specs-s:texlive-pst-ovl)
msgid ""
-"The package helps LaTeX users to create PDF/X-1a and PFD/A-1b compliant pdf documents with pdfTeX.\n"
+"The package is useful when building an image from assorted material, as in the slides of a projected presentation. The package requires pstricks, and shares that package's restrictions on usage when generating PDF output.\n"
"\n"
-"date: 2009-05-04 09:07:03 +0000"
+"date: 2014-05-13 19:58:12 +0000"
msgstr ""
-#. description(texlive-logreq)
-msgid ""
-"The package helps to automate a typical LaTeX workflow that involves running LaTeX several times, running tools such as BibTeX or makeindex, and so on. It will log requests like \"please rerun LaTeX\" or \"please run BibTeX on file X\" to an external XML file which lists all open tasks in a machine- readable format. Compiler scripts and integrated LaTeX editing environments may parse this file to determine the next steps in the workflow in a way that is more efficient than parsing the main log file. In sum, the package will do two things: 1) enable package authors to use LaTeX commands to issue requests, 2) collect all requests from all packages and write them to an external XML file at the end of the document.\n"
-"\n"
-"date: 2010-08-11 11:58:09 +0000"
+#. summary(texlive-specs-s:texlive-pst-ovl-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-ovl"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-ovl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-ovl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-pad)
+msgid "Draw simple attachment systems with PSTricks"
msgstr ""
-#. description(texlive-section)
+#. description(texlive-specs-s:texlive-pst-pad)
msgid ""
-"The package implements a pretty extensive scheme to make more manageable the business of configuring LaTeX output.\n"
+"The package collects a set of graphical elements based on PStricks that can be used to facilitate display of attachment systems such as two differently shaped surfaces with or without a fluid wedged in between. These macros ease the display of wet adhesion models and common friction systems such as boundary lubrication, elastohydrodynamic lubrication and hydrodynamic lubrication.\n"
"\n"
-"date: 2010-10-24 12:28:08 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-skeyval)
-msgid ""
-"The package integrates the features of xkeyval and of pgfkeys by introducing a new type of handlers. Style keys, links, changing key callbacks and values on the fly, and other features of pgfkeys are introduced in a new context.\n"
-"\n"
-"date: 2013-05-16 15:14:56 +0000"
+#. summary(texlive-specs-s:texlive-pst-pad-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-pad"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-pad-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-pad"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-pdf)
+msgid "Make PDF versions of graphics by processing between runs"
msgstr ""
-#. description(texlive-interactiveworkbook)
+#. description(texlive-specs-s:texlive-pst-pdf)
msgid ""
-"The package interactiveworkbook gives the user the ability to write LaTeX documents which, ultimately, create interactive question-and-answer Portable Document Format (PDF) tutorials meant to be used by Internet students and that, in particular, freely use mathematical notation.\n"
+"The package pst-pdf simplifies the use of graphics from PSTricks and other PostScript code in PDF documents. As in building a bibliography with BibTEX, additional external programmes are invoked. In this case they are used to create a PDF file (\\PDFcontainer) that will contain all the graphics material. In the final document these contents will be inserted instead of the original PostScript code. The package works with pstricks and requires a recent version of the preview package.\n"
"\n"
-"date: 2006-10-06 11:44:13 +0000"
+"date: 2012-06-18 11:20:48 +0000"
msgstr ""
-#. description(texlive-svn-prov)
-msgid ""
-"The package introduces Subversion variants of the standard LaTeX macros \\ProvidesPackage, \\ProvidesClass and \\ProvidesFile where the file name and date is extracted from Subversion Id keywords. The file name may also be given explicitly as an optional argument.\n"
-"\n"
-"date: 2010-04-25 21:29:42 +0000"
+#. summary(texlive-specs-s:texlive-pst-pdf-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-pdf"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-pdf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-pdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-pdgr)
+msgid "Draw medical pedigrees using pstricks"
msgstr ""
-#. description(texlive-shadowtext)
+#. description(texlive-specs-s:texlive-pst-pdgr)
msgid ""
-"The package introduces a command \\shadowtext, which adds a drop shadow to the text that is given as its argument. The colour and positioning of the shadow are customisable.\n"
+"The package provides a set of macros based on PSTricks to draw medical pedigrees according to the recommendations for standardized human pedigree nomenclature. The drawing commands place the symbols on a pspicture canvas. An interface for making trees is also provided. The package may be used both with LaTeX and PlainTeX. A separate Perl program for generating TeX files from spreadsheets is available.\n"
"\n"
-"date: 2012-05-18 17:11:54 +0000"
+"date: 2012-04-11 13:14:23 +0000"
msgstr ""
-#. description(texlive-pst-spectra)
-msgid ""
-"The package is a PSTricks extension, based on a NASA lines database. It allows you to draw continuum, emission and absorption spectra. A Total of 16 880 visible lines from 99 elements can be displayed. The package requires the xkeyval package for decoding its arguments.\n"
-"\n"
-"date: 2008-08-22 22:25:16 +0000"
+#. summary(texlive-specs-s:texlive-pst-pdgr-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-pdgr"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-pdgr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-pdgr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-perspective)
+msgid "Draw perspective views using pstricks"
msgstr ""
-#. description(texlive-nfssext-cfr)
+#. description(texlive-specs-s:texlive-pst-perspective)
msgid ""
-"The package is a development of nfssext.sty, distributed with the examples for the font installation guide. The package has been developed for use in packages such as cfr-lm and venturisadf,\n"
+"The package provides the means to draw an orthogonal parallel projection with an arbitrarily chosen angle and a variable shortening factor.\n"
"\n"
-"date: 2010-06-30 10:36:12 +0000"
+"date: 2014-04-18 16:08:56 +0000"
msgstr ""
-#. description(texlive-preview)
-msgid ""
-"The package is a free-standing part of the preview-latex bundle. The package provides the support preview-latex needs, when it chooses the matter it will preview. The output may reasonably be expected to have other uses, as in html translators, etc.\n"
-"\n"
-"date: 2012-12-02 21:39:14 +0000"
+#. summary(texlive-specs-s:texlive-pst-perspective-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-perspective"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-perspective-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-perspective"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-platon)
+msgid "Platonic solids in PSTricks"
msgstr ""
-#. description(texlive-mfpic4ode)
+#. description(texlive-specs-s:texlive-pst-platon)
msgid ""
-"The package is a small set of macros for drawing direction fields, phase portraits and trajectories of differential equations and two dimensional autonomous systems. The Euler, Runge-Kutta and 4th order Runge-Kutta algorithms are available to solve the ODEs. The picture is translated into mfpic macros and MetaPost is used to create the final drawing. The package is was designed for use with LaTeX, but it can be used in plain TeX as well. Online demonstration of the mfpic4ode macros is available on the Mfpic Previewer as Example 6.\n"
+"The package adds to PSTricks the ability to draw 3-dimensional views of the five Platonic solids.\n"
"\n"
-"date: 2010-04-07 17:03:48 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-vdmlisting)
-msgid ""
-"The package is an extension for the listings package that provides a source code printer for LaTeX. This package defines new language definitions and listing environments for the three language dialects of the Vienna Development Method: VDM-SL, VDM-PP and VDM-RT. If one wants to typeset VDM with a mathematical syntax instead of the ASCII syntax used here one should use the vdm package instead\n"
-"\n"
-"date: 2013-04-16 09:30:34 +0000"
+#. summary(texlive-specs-s:texlive-pst-platon-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-platon"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-platon-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-platon"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-plot)
+msgid "Plot data using PSTricks"
msgstr ""
-#. description(texlive-mmap)
+#. description(texlive-specs-s:texlive-pst-plot)
msgid ""
-"The package is an extension of cmap with improved flexibility and coverage, including the ability to re-encode Knuth's basic mathematics fonts.\n"
+"The package provides plotting of data (typically from external files), using PSTricks. Plots may be configured using a wide variety of parameters.\n"
"\n"
-"date: 2009-09-27 09:55:52 +0000"
+"date: 2014-05-16 11:47:09 +0000"
msgstr ""
-#. description(texlive-luasseq)
-msgid ""
-"The package is an update of the author's sseq package, for use with LuaLaTeX. This version uses less memory, and operates faster than the original; it also offers several enhancements.\n"
-"\n"
-"date: 2010-11-14 09:49:57 +0000"
+#. summary(texlive-specs-s:texlive-pst-plot-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-plot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-plot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-plot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-poly)
+msgid "Polygons with PSTricks"
msgstr ""
-#. description(texlive-xeindex)
+#. description(texlive-specs-s:texlive-pst-poly)
msgid ""
-"The package is based on XeSearch, and will automatically index words or phrases in an XeLaTeX document. Words are declared in a list, and every occurrence then creates an index entry whose content can be fully specified beforehand.\n"
+"This PSTricks package provides a really rather simple command \\PstPolygon that will draw various regular and non-regular polygons (according to command parameters); various shortcuts to commonly-used polygons are provided, as well as a command \\pspolygonbox that frames text with a polygon. The package uses the xkeyval package for argument decoding.\n"
"\n"
-"date: 2010-01-17 13:52:57 +0000"
+"date: 2012-06-18 11:20:48 +0000"
msgstr ""
-#. description(texlive-schwalbe-chess)
-msgid ""
-"The package is based on chess-problem-diagrams, which in its turn has a dependency on the bartel-chess-fonts\n"
-"\n"
-"date: 2013-04-14 16:39:07 +0000"
+#. summary(texlive-specs-s:texlive-pst-poly-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-poly"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-poly-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-poly"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-pulley)
+msgid "Plot pulleys, using pstricks"
msgstr ""
-#. description(texlive-pst-circ)
+#. description(texlive-specs-s:texlive-pst-pulley)
msgid ""
-"The package is built using PSTricks and in particular pst-node. It can easily draw current 2-terminal devices and some 3- and 4-terminal devices used in electronic or electric theory. The package's macros are designed with a view to 'logical' representation of circuits, as far as possible, so as to relieve the user of purely graphical considerations when expressing a circuit.\n"
+"The package enables the user to draw pulley systems with up to 6 pulleys. The pulley diagrams are labelled with the physical properties of the system. The package uses pstricks, and requires a several pstricks-related packages.\n"
"\n"
-"date: 2013-05-17 12:10:30 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-usebib)
-msgid ""
-"The package is described by its author as \"a poor person's replacement for the more powerful methods provided by biblatex to access data from a .bib file\". Its principle commands are \\bibinput (which specifies a database to use) and \\usebibdata (which typesets a single field from a specified entry in that database.\n"
-"\n"
-"date: 2012-04-13 21:54:56 +0000"
+#. summary(texlive-specs-s:texlive-pst-pulley-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-pulley"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-s:texlive-pst-pulley-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-pulley"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-qtree)
+msgid "Simple syntax for trees"
msgstr ""
-#. description(texlive-probsoln)
+#. description(texlive-specs-s:texlive-pst-qtree)
msgid ""
-"The package is designed for lecturers who have to generate new problem sheets for their students on a regular basis (e.g. yearly) by randomly selecting a specified number of problems defined in another file. The package allows you easily to generate a new problem sheet that is different from the previous year, thus alleviating the temptation of students to seek out the previous year's students and checking out their answers. The solutions to the problems can be defined along with the problem, making it easy to generate the solution sheet from the same source code; problems may be reused within a document, so that solutions may appear in a different section of the same document as the problems they cover.\n"
+"The package provides a qtree-like front end for PSTricks.\n"
"\n"
-"date: 2012-11-17 09:29:25 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-poetrytex)
-msgid ""
-"The package is designed to aid in the management and formatting of anthologies of poetry and other writings; it does not concern itself with actually typesettinig the verse itself.\n"
-"\n"
-"date: 2013-03-10 23:44:39 +0000"
+#. summary(texlive-specs-s:texlive-pst-qtree-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-qtree"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-qtree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-qtree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-rubans)
+msgid "Draw three-dimensional ribbons"
msgstr ""
-#. description(texlive-tkz-graph)
+#. description(texlive-specs-s:texlive-pst-rubans)
msgid ""
-"The package is designed to create graph diagrams as simply as possible, using TikZ\n"
+"The package uses PStricks and pst-solides3d to draw three dimensional ribbons on a cylinder, torus, sphere, cone or paraboloid. The width of the ribbon, the number of turns, the colour of the outer and the inner surface of the ribbon may be set. In the case of circular and conical helices, one may also choose the number of ribbons.\n"
"\n"
-"date: 2011-06-05 22:03:44 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-solides3d)
-msgid ""
-"The package is designed to draw solids in 3d perspective. Features include: - create primitive solids; - create solids by including a list of its vertices and faces; - faces of solids and surfaces can be colored by choosing from a very large palette of colors; - draw parametric surfaces in algebraic and reverse polish notation; - create explicit and parameterized algebraic functions drawn in 2 or 3 dimensions; - project text onto a plane and onto the faces of a solid; - support for including external database files\n"
-"\n"
-"date: 2012-11-16 19:45:05 +0000"
+#. summary(texlive-specs-s:texlive-pst-rubans-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-rubans"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-rubans-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-rubans"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-sigsys)
+msgid "Support of signal processing-related disciplines"
msgstr ""
-#. description(texlive-msg)
+#. description(texlive-specs-s:texlive-pst-sigsys)
msgid ""
-"The package is designed to localise any document class or package. This should be very useful for end-users who could obtain messages in their own preferred language. It is really easy to use by writers of other classes and packages. Volunteers are urged to test the package, report, and even to localise the message file to their own language. Documentation is provided in English.\n"
+"The package offers a collection of useful macros for disciplines related to signal processing. It defines macros for plotting a sequence of numbers, drawing the pole-zero diagram of a system, shading the region of convergence, creating an adder or a multiplier node, placing a framed node at a given coordinate, creating an up-sampler or a down-sampler node, drawing the block diagram of a system, drawing adaptive systems, sequentially connecting a list of nodes, and connecting a list of nodes using any node-connecting macro.\n"
"\n"
-"date: 2006-11-16 16:55:10 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-libgreek)
-msgid ""
-"The package is for LaTeX users who wish to use the Libertine or Biolinum font for the Greek letters in math mode. It is not necessary to load the libertine package itself, but of course the Linux-Libertine/Biolinum fonts and LaTeX support files must have been installed.\n"
-"\n"
-"date: 2012-09-23 15:25:02 +0000"
+#. summary(texlive-specs-s:texlive-pst-sigsys-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-sigsys"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-sigsys-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-sigsys"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-slpe)
+msgid "Sophisticated colour gradients"
msgstr ""
-#. description(texlive-twoinone)
+#. description(texlive-specs-s:texlive-pst-slpe)
msgid ""
-"The package is for printing two pages on a single (landscape) A4 page. Page numbers appear on the included pages, and not on the landscape 'container' page.\n"
+"This PStricks package covers all the colour gradient functionality of pst-grad (part of the base pstricks distribution), and provides the following facilities: it permits the user to specify an arbitrary number of colours, along with the points at which they are to be reached; it converts between RGB and HSV behind the scenes; it provides concentric and radial gradients; it provides a command \\psBall that generates bullets with a three-dimensional appearance; and uses the xkeyval package for the extended key handling.\n"
"\n"
-"date: 2010-02-26 10:17:49 +0000"
+"date: 2013-12-02 15:37:30 +0000"
msgstr ""
-#. description(texlive-ulqda)
-msgid ""
-"The package is for use in Qualitative Data Analysis research. It supports the integration of Qualitative Data Analysis (QDA) research tasks, specifically for Grounded Theory, into the LaTeX work flow. It assists in the analysis of textual data such as interview transcripts and field notes by providing the LaTeX user with macros which are used to markup textual information -- for example, in-depth interviews.\n"
-"\n"
-"date: 2009-11-10 08:00:49 +0000"
+#. summary(texlive-specs-s:texlive-pst-slpe-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-slpe"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-slpe-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-slpe"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-solarsystem)
+msgid "Plot the solar system for a specific date"
msgstr ""
-#. description(texlive-xq)
+#. description(texlive-specs-s:texlive-pst-solarsystem)
msgid ""
-"The package is for writing about xiangqi or chinese chess. You can write games or parts of games and show diagrams with special positions.\n"
+"The package uses pstricks to produce diagrams of the visible planets, projected on the plane of the ecliptic. It is not possible to represent all the planets in their real proportions, so only Mercury, Venus, Earth and Mars have their orbits in correct proportions and their relative sizes are observed. Saturn and Jupiter are in the right direction, but not in the correct size.\n"
"\n"
-"date: 2007-03-13 08:23:19 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-titlecaps)
-msgid ""
-"The package is intended for setting rich text into titling capitals (in which the first character of words are capitalized). It automatically accounts for diacritical marks (like umlauts), national symbols (like \"ae\"), punctuation, and font changing commands that alter the appearance or size of the text. It allows a list of predesignated words to be protected as lower-cased, and also allows for titling exceptions of various sorts.\n"
-"\n"
-"date: 2013-04-15 09:53:39 +0000"
+#. summary(texlive-specs-s:texlive-pst-solarsystem-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-solarsystem"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(texlive-specs-s:texlive-pst-solarsystem-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-solarsystem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-solides3d)
+msgid "Draw perspective views of 3D solids"
msgstr ""
-#. description(texlive-units)
+#. description(texlive-specs-s:texlive-pst-solides3d)
msgid ""
-"The package is provided as a bundle with the nicefrac package for typing fractions. Units uses nicefrac in typesetting physical units in a standard-looking sort of way.\n"
+"The package is designed to draw solids in 3d perspective. Features include: create primitive solids; create solids by including a list of its vertices and faces; faces of solids and surfaces can be colored by choosing from a very large palette of colors; draw parametric surfaces in algebraic and reverse polish notation; create explicit and parameterized algebraic functions drawn in 2 or 3 dimensions; project text onto a plane and onto the faces of a solid; support for including external database files.\n"
"\n"
-"date: 2009-09-27 09:52:43 +0000"
+"date: 2014-03-28 17:05:25 +0000"
msgstr ""
-#. description(texlive-tkz-base)
-msgid ""
-"The package is the base of a set of packages, designed to give mathematics teachers (and students) easy access to programming of drawings with TikZ.\n"
-"\n"
-"date: 2011-06-05 21:10:23 +0000"
+#. summary(texlive-specs-s:texlive-pst-solides3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-solides3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-solides3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-solides3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-soroban)
+msgid "Draw a Soroban using PSTricks"
msgstr ""
-#. description(texlive-xpinyin)
+#. description(texlive-specs-s:texlive-pst-soroban)
msgid ""
-"The package is written to simplify the input of Hanyu Pinyin. Macros are provided that automatically add pinyin to Chinese characters.\n"
+"The package uses PSTricks to draw a Japanese abacus, or soroban. The soroban is still used in Japan today.\n"
"\n"
-"date: 2013-05-24 10:22:55 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-todonotes)
-msgid ""
-"The package lets the user mark things to do later, in a simple and visually appealing way. The package takes several options to enable customization/finetuning of the visual appearance.\n"
-"\n"
-"date: 2012-11-25 11:17:34 +0000"
+#. summary(texlive-specs-s:texlive-pst-soroban-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-soroban"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-soroban-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-soroban"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-spectra)
+msgid "Draw continuum, emission and absorption spectra with PSTricks"
msgstr ""
-#. description(texlive-rmpage)
+#. description(texlive-specs-s:texlive-pst-spectra)
msgid ""
-"The package lets you change page layout parameters in small steps over a range of values using options. It can set \\textwidth appropriately for the main fount, and ensure that the text fits inside the printable area of a printer. An rmpage-formatted document can be typeset identically without rmpage after a single cut and paste operation. Local configuration can set defaults: for all documents; and by class, by printer, and by paper size. The geometry package is better if you want to set page layout parameters to particular measurements.\n"
+"The package is a PSTricks extension, based on a NASA lines database. It allows you to draw continuum, emission and absorption spectra. A Total of 16 880 visible lines from 99 elements can be displayed. The package requires the xkeyval package for decoding its arguments.\n"
"\n"
-"date: 2010-10-04 09:12:53 +0000"
+"date: 2012-08-25 12:43:44 +0000"
msgstr ""
-#. description(texlive-xcite)
-msgid ""
-"The package lets you use citation keys from another document, just as the xr package allows cross-document use of labels.\n"
-"\n"
-"date: 2011-09-02 23:03:37 +0000"
+#. summary(texlive-specs-s:texlive-pst-spectra-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-spectra"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-spectra-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-spectra"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-stru)
+msgid "Civil engineering diagrams, using pstricks"
msgstr ""
-#. description(texlive-properties)
+#. description(texlive-specs-s:texlive-pst-stru)
msgid ""
-"The package loads properties (key, value) from a properties file, e.g. \\jobname.properties.\n"
+"The package is a PSTricks-based, and provides facilities to draw structural schemes in civil engineering analysis, for beams, portals, arches and piles.\n"
"\n"
-"date: 2009-11-10 08:17:41 +0000"
+"date: 2012-02-14 11:36:22 +0000"
msgstr ""
-#. description(texlive-xltxtra)
-msgid ""
-"The package loads the fixltx2e package from the LaTeX distribution, and etex.sty from the e-TeX distribution. The package then patches the \\- (discretionary hyphen command) to use the current hyphen character (which may be different from than the default, which is the character at the ASCII hyphen slot), and loads the realscripts to patch the \\textsuperscript command (from the LaTeX kernel) and the \\textsubscript command (from the fixltx2e package). The package is loaded by the fontspec package, so that it should not ordinarily be necessary to load it explicitly. The package relies on the metalogo package for typesetting the XeTeX and XeLaTeX logos.\n"
-"\n"
-"date: 2012-03-06 13:36:12 +0000"
+#. summary(texlive-specs-s:texlive-pst-stru-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-stru"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-stru-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-stru"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-support)
+msgid "Assorted support files for use with PStricks"
msgstr ""
-#. description(texlive-lua-check-hyphen)
+#. description(texlive-specs-s:texlive-pst-support)
msgid ""
-"The package looks at all hyphenation breaks in the document, comparing them against a white-list prepared by the author. If a hyphenation break is found, for which there is no entry in the white-list, the package flags the line where the break starts. The author may then either add the hyphenation to the white-list, or adjust the document to avoid the break.\n"
+"An appropriate set of job options, together with process scripts for use with TeXnicCenter/\n"
"\n"
-"date: 2012-07-03 09:28:15 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ifluatex)
-msgid ""
-"The package looks for LuaTeX regardless of its mode and provides the switch \\ifluatex; it works with Plain TeX or LaTeX. The package is part of the oberdiek bundle.\n"
-"\n"
-"date: 2012-05-29 13:13:53 +0000"
+#. summary(texlive-specs-s:texlive-pst-text)
+msgid "Text and character manipulation in PSTricks"
msgstr ""
-#. description(texlive-ltxnew)
+#. description(texlive-specs-s:texlive-pst-text)
msgid ""
-"The package ltxnew provides \\new, \\renew and \\provide prefixes for checking definitions. It is designed to work with e-TeX distributions of LaTeX and relies on the LaTeX internal macro \\@ifdefinable. Local allocation of counters, dimensions, skips, muskips, boxes, tokens and marks are provided by the etex package. \\new and \\renew as well as \\provide may be used for all kind of control sequences. Please refer to the section \"Using \\new\" of the PDF documentation.\n"
+"Pst-text is a PSTricks based package for plotting text along a different path and manipulating characters. It includes the functionality of the old package pst-char.\n"
"\n"
-"date: 2011-03-02 15:08:00 +0000"
+"date: 2012-04-16 15:52:21 +0000"
msgstr ""
-#. description(texlive-mailmerge)
-msgid ""
-"The package mailmerge provides an interface to produce text from a template, where fields are replaced by actual data, as in a database. The package may be used to produce several letters from a template, certificates or other such documents. It allows access to the entry number, number of entries and so on.\n"
-"\n"
-"date: 2009-11-09 22:10:10 +0000"
+#. summary(texlive-specs-s:texlive-pst-text-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-text"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-text-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-text"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-thick)
+msgid "Drawing very thick lines and curves"
msgstr ""
-#. description(texlive-isonums)
+#. description(texlive-specs-s:texlive-pst-thick)
msgid ""
-"The package makes a quick hack to ziffer to display numbers in maths mode according to ISO 31-0, regardless of input format (European $1.235,7$ or Anglo-American $1,235.7$). The options [euro, anglo] control the global input format. Default input format is anglo. Documentation is included as comments to the text source.\n"
+"The package supports drawing of very thick lines and curves in PSTricks, with various fillings for the body of the lines.\n"
"\n"
-"date: 2010-03-09 12:05:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ot-tableau)
-msgid ""
-"The package makes it easy to create beautiful optimality- theoretic tableaux. The LaTeX source is visually very similar to a formatted tableau, which makes working with the source code painless (well, less painful). A variety of stylistic variants are available to suit personal taste.\n"
-"\n"
-"date: 2010-04-14 16:13:33 +0000"
+#. summary(texlive-specs-s:texlive-pst-thick-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-thick"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-thick-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-thick"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-tools)
+msgid "PStricks support functions"
msgstr ""
-#. description(texlive-pgf-soroban)
+#. description(texlive-specs-s:texlive-pst-tools)
msgid ""
-"The package makes it possible to create pictures of the soroban (Japanese abacus) using PGF/TikZ\n"
+"The package provides helper functions for other PSTricks related packages.\n"
"\n"
-"date: 2008-08-22 22:06:02 +0000"
+"date: 2014-05-16 10:23:05 +0000"
msgstr ""
-#. description(texlive-lcyw)
-msgid ""
-"The package makes the classic CM Cyrillic fonts accessible for use with LaTeX.\n"
-"\n"
-"date: 2009-12-16 18:51:33 +0000"
+#. summary(texlive-specs-s:texlive-pst-tools-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-tools"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-tools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-tools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-tree)
+msgid "Trees, using pstricks"
msgstr ""
-#. description(texlive-zhspacing)
+#. description(texlive-specs-s:texlive-pst-tree)
msgid ""
-"The package manages spacing in a CJK document; between consecutive Chinese letters, spaces are ignored, but a consistent space is inserted between Chinese text and English (or mathematics). The package may be used by any document format under XeTeX.\n"
+"pst-tree is a pstricks package that defines a macro \\pstree which offers a structured way of joining nodes created using pst-node in order to draw trees.\n"
"\n"
-"date: 2012-03-14 17:58:06 +0000"
+"date: 2012-02-10 17:28:55 +0000"
msgstr ""
-#. description(texlive-invoice)
-msgid ""
-"The package may be used for generating invoices. The package can deal with invisible expense items and deductions; output may be presented in any of 10 different languages. The package depends on the fp and calc packages for its calculations.\n"
-"\n"
-"date: 2011-10-04 16:45:10 +0000"
+#. summary(texlive-specs-s:texlive-pst-tree-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-pst-tree"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-s:texlive-pst-tree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-tree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-tvz)
+msgid "Draw trees with more than on root node, using PSTricks"
msgstr ""
-#. description(texlive-rterface)
+#. description(texlive-specs-s:texlive-pst-tvz)
msgid ""
-"The package mediates interaction between LaTeX and R; it allows LaTeX to set R's parameters, and provides code to read R output.\n"
+"The package uses PSTricks to draw trees with more than one root node. It is similar to pst-tree, though it uses a different placement algorithm.\n"
"\n"
-"date: 2013-04-23 17:30:36 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-robustcommand)
-msgid ""
-"The package merely provides a variation of \\DeclareRobustCommand, which checks for the existence of a command before declaring it robust.\n"
-"\n"
-"date: 2007-02-26 14:09:49 +0000"
+#. summary(texlive-specs-s:texlive-pst-tvz-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-tvz"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-tvz-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-tvz"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-uml)
+msgid "UML diagrams with PSTricks"
msgstr ""
-#. description(texlive-sitem)
+#. description(texlive-specs-s:texlive-pst-uml)
msgid ""
-"The package modifies \\item commands to save the optional argument in a box.\n"
+"pst-uml is a PSTricks package that provides support for drawing moderately complex UML (Universal Modelling Language) diagrams. (The PDF documentation is written in French.)\n"
"\n"
-"date: 2011-04-19 08:29:51 +0000"
+"date: 2012-06-26 14:01:30 +0000"
msgstr ""
-#. description(texlive-ziffer)
-msgid ""
-"The package modifies the behaviour of characters in maths mode so that: '.' is used as a one-thousand separator (as is common in Germany) ',' is used as a decimal separator (as is common in Germany) '--' is represented with spacing as appropriate to such constructs as '1.000,--'. These conversions may be switched on and off.\n"
-"\n"
-"date: 2008-08-24 12:22:28 +0000"
+#. summary(texlive-specs-s:texlive-pst-uml-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-uml"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-uml-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-uml"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-vectorian)
+msgid "Printing ornaments"
msgstr ""
-#. description(texlive-multibbl)
+#. description(texlive-specs-s:texlive-pst-vectorian)
msgid ""
-"The package multibbl redefines the standard bibliographic commands so that one can generate multiple reference sections. Each section has it own auxiliary file (for use with BibTeX) and title.\n"
+"The package uses PStricks to draw ornaments (a substantial repertoire of ornaments is provided).\n"
"\n"
-"date: 2007-05-25 14:15:27 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-numprint)
-msgid ""
-"The package numprint prints numbers with a separator every three digits and converts numbers given as 12345.6e789 to 12\\,345,6\\cdot 10^{789}. Numbers are printed in the current mode (text or math) in order to use the correct font. Many things, including the decimal sign, the thousand separator, as well as the product sign can be changed by the user, e.g., to reach 12,345.6\\times 10^{789}. If an optional argument is given it is printed upright as unit. Numbers can be rounded to a given number of digits. The package supports an automatic, language-dependent change of the number format. Tabular alignment using the tabular(*), array, tabularx, and longtable environments (similar to the dcolumn and rccol packages) is supported using all features of numprint. Additional text can be added before and after the formatted number.\n"
-"\n"
-"date: 2012-08-22 13:46:20 +0000"
+#. summary(texlive-specs-s:texlive-pst-vectorian-doc)
+msgid "Documentation for texlive-pst-vectorian"
msgstr ""
-#. description(texlive-poemscol)
-msgid ""
-"The package offers LaTeX macros for typesetting critical editions of poetry. Its features include automatic linenumbering, generation of separate endnotes sections for emendations, textual collations, and explanatory notes, special marking for cases in which page breaks occur during stanza breaks, running headers of the form 'Notes to pp. xx-yy' for the notes sections, index of titles and first lines, and automatic generation of a table of contents.\n"
-"\n"
-"date: 2013-05-25 15:03:59 +0000"
+#. description(texlive-specs-s:texlive-pst-vectorian-doc)
+msgid "This package includes the documentation for texlive-pst-vectorian"
msgstr ""
-#. description(texlive-jamtimes)
-msgid ""
-"The package offers LaTeX support for the expanded Times Roman font, which has been used for many years in the Journal d'Analyse Mathematique. Mathematics support is based on the Belleek fonts.\n"
-"\n"
-"date: 2009-11-07 09:52:42 +0000"
+#. summary(texlive-specs-s:texlive-pst-vowel)
+msgid "Enable arrows showing diphthongs on vowel charts"
msgstr ""
-#. description(texlive-paratype)
+#. description(texlive-specs-s:texlive-pst-vowel)
msgid ""
-"The package offers LaTeX support for the fonts PT Sans, PT Serif and PT Mono developed by ParaType for the project \"Public Types of Russian Federation\", and released under an open user license. The fonts themselves are provided in both the TrueType and Type 1 formats, both created by ParaType). The fonts provide encodings OT1, T1, IL2, TS1, T2* and X2. The package provides a convenient replacement of the two packages ptsans and ptserif.\n"
+"The package extends the vowel package (distributed as part of the tipa bundle) by allowing the user to draw arrows between vowels to show relationships such as diphthong membership. The package depends on use of pstricks.\n"
"\n"
-"date: 2013-05-21 13:19:45 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-present)
-msgid ""
-"The package offers a collection of simple macros for preparing presentations in Plain TeX. Slide colour and text colour may be set, links between parts of the presentation, to other files, and to web addresses may be inserted. Images may be included easily, and code is available to provide transition effects between slides or frames. The structure of the macros is not overly complex, so that users should find it easy to adapt the macros to their specific needs.\n"
-"\n"
-"date: 2012-04-12 19:32:25 +0000"
+#. summary(texlive-specs-s:texlive-pst-vowel-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-vowel"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-vowel-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-vowel"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst-vue3d)
+msgid "Draw perspective views of three dimensional objects"
msgstr ""
-#. description(texlive-pst-sigsys)
+#. description(texlive-specs-s:texlive-pst-vue3d)
msgid ""
-"The package offers a collection of useful macros for disciplines related to signal processing. It defines macros for plotting a sequence of numbers, drawing the pole-zero diagram of a system, shading the region of convergence, creating an adder or a multiplier node, placing a framed node at a given coordinate, creating an up-sampler or a down-sampler node, drawing the block diagram of a system, drawing adaptive systems, sequentially connecting a list of nodes, and connecting a list of nodes using any node-connecting macro.\n"
+"With pst-vue3d three dimensional objects like cubes, spheres and others can be viewed from different points. The distribution includes a comprehensive set of examples of usage.\n"
"\n"
-"date: 2011-03-09 19:38:22 +0000"
+"date: 2012-04-16 15:52:21 +0000"
msgstr ""
-#. description(texlive-tabriz-thesis)
-msgid ""
-"The package offers a document class for typesetting theses and dissertations at the University of Tabriz.\n"
-"\n"
-"date: 2013-03-17 15:41:59 +0000"
+#. summary(texlive-specs-s:texlive-pst-vue3d-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst-vue3d"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst-vue3d-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst-vue3d"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pst2pdf)
+msgid "A script to compile pstricks documents via pdftex"
msgstr ""
-#. description(texlive-tabularew)
+#. description(texlive-specs-s:texlive-pst2pdf)
msgid ""
-"The package offers a modification of the tabular environment, which deals with the problem of column heads that are significantly wider than the body of the column.\n"
+"The script extracts the preamble of the document and runs all \\begin{postscript}...\\end{postscript} \\begin{pspicture}...\\end{pspicture} and \\pspicture...\\endpspicture separately through LaTeX with the same preamble as the original document; thus it creates EPS, PNG and PDF files of these snippets. In a final PDFLaTeX run the script replaces the environments with \\includegraphics to include the processed snippets. Detail documentation is acquired from the document itself via Perldoc.\n"
"\n"
-"date: 2009-11-09 23:58:07 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tap)
-msgid ""
-"The package offers a simple notation for pretty complex tables (to Michael J. Ferguson's credit). With PostScript, the package allows shaded/coloured tables, diagonal rules, etc. The package is supposed to work with both Plain and LaTeX. An AWK converter from ASCII semigraphic tables to TAP notation is included.\n"
-"\n"
-"date: 2009-10-09 22:51:28 +0000"
+#. summary(texlive-specs-s:texlive-pst2pdf-doc)
+#, fuzzy
+msgid "Documentation for texlive-pst2pdf"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pst2pdf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pst2pdf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pstool)
+msgid "Support for psfrag within pdfLaTeX"
msgstr ""
-#. description(texlive-polynomial)
+#. description(texlive-specs-s:texlive-pstool)
msgid ""
-"The package offers an easy way to write (univariate) polynomials and rational functions. It defines two commands, one for polynomials \\polynomial{coeffs} and one for rational functions \\polynomialfrac{Numerator}{Denominator}. Both commands take lists of coefficients as arguments, and offer limited optional behaviour.\n"
+"The package works in the same sort of way as pst-pdf, but it also processes the PostScript graphics with psfrag to add labels within the graphic, before conversion. Thus the bundle replaces two steps of an ordinary workflow. (Naturally, the package requires that \\write 18 is enabled.) Pstool ensures that each version of each graphic is compiled once only (the graphic is (re-)compiled only if it has changed since the previous compilation of the document). This drastically speeds up the running of the package in the typical case (though the first run of any document is inevitably just as slow as with any similar package).\n"
"\n"
-"date: 2008-08-22 22:06:02 +0000"
+"date: 2014-05-11 10:42:16 +0000"
msgstr ""
-#. description(texlive-vruler)
+#. summary(texlive-specs-s:texlive-pstool-doc)
+#, fuzzy
+msgid "Documentation for texlive-pstool"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pstool-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pstool"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pstools)
+#, fuzzy
+#| msgid "Bitmap Image to Encapsulated PostScript Converter"
+msgid "Produce Encapsulated PostScript from PostScript"
+msgstr "Konvertor bitmapových obrázků do EPS"
+
+#. description(texlive-specs-s:texlive-pstools)
msgid ""
-"The package offers facilities for adding a columns of numbering to the general text so that the text can be properly referenced. The vertical ruler can be scaled and moved freely. The package may be used either with LaTeX or with plain TeX.\n"
+"Produce Encapsulated PostScript Files (EPS/EPSF) from a one- page PostScript document, or any PostScript document. A correct Bounding Box is calculated for the EPS files and some PostScript command sequences that can produce errorneous results on printers are filtered. The input is cropped to include just the image contained in the PostScript file. The EPS files can then be included into TeX documents. Other programs like ps2epsi (a script distributed with ghostscript) don't always calculate the correct bounding box (because the values are put on the PostScript stack which may get corrupted by bad PostScript code) or they round it off, resulting in clipping the image. Therefore ps2eps uses a resolution of 144 dpi to get the correct bounding box. The bundle includes binaries for Linux, Solaris, Digital Unix or Windows 2000/9x/NT; for other platforms, the user needs perl, ghostscript and an ANSI-C compiler. Included in the distribution is the bbox program, an application to produce B
ounding Box values for rawppm or rawpbm format files.\n"
"\n"
-"date: 2011-03-03 09:36:36 +0000"
+"date: 2012-07-20 18:39:39 +0000"
msgstr ""
-#. description(texlive-jfontmaps)
+#. summary(texlive-specs-s:texlive-pstools-doc)
+#, fuzzy
+msgid "Documentation for texlive-pstools"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pstools-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pstools"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pstricks)
+#, fuzzy
+#| msgid "PostScript and PDF Converter"
+msgid "PostScript macros for TeX"
+msgstr "Konvertor PostScriptu a PDF"
+
+#. description(texlive-specs-s:texlive-pstricks)
msgid ""
-"The package offers font maps, and supporting material, that make various Japanese fonts available to users of (u)ptex and related programs or formats.\n"
+"PStricks offers an extensive collection of macros for generating PostScript that is usable with most TeX macro formats, including Plain TeX, LaTeX, AMS-TeX, and AMS-LaTeX. Included are macros for colour, graphics, pie charts, rotation, trees and overlays. It has many special features, including a wide variety of graphics (picture drawing) macros, with a flexible interface and with colour support. There are macros for colouring or shading the cells of tables. The package pstricks-add contains bug-fixes and additions for pstricks (among other things). PSTricks uses PostScript \\special commands, which are not supported by PDF(La)TeX. This limitation may be overcome by using either the pst-pdf or the pdftricks package, to generate a PDF inclusion from a PSTricks diagram. Note that this is one of a pair of catalogue entries for PSTricks; the other one (PSTricks) is acting as a \"stub\", while editorial work on catalogue entries for PSTricks contributed is completed.\n"
"\n"
-"date: 2013-04-11 20:52:04 +0000"
+"date: 2014-05-20 09:23:08 +0000"
msgstr ""
-#. description(texlive-poster-mac)
+#. summary(texlive-specs-s:texlive-pstricks-add)
+#, fuzzy
+msgid "A collection of add-ons and bugfixes for PSTricks"
+msgstr "Sbírka dalších kanálů pro používání Pilota pro GNOME"
+
+#. description(texlive-specs-s:texlive-pstricks-add)
msgid ""
-"The package offers macros for making posters and banners with TeX. It is compatible with most TeX macro formats, including Plain TeX, LaTeX, AmSTeX, and AmS-LaTeX. The package creates a poster as huge box, which is then distributed over as many printer pages as necessary. The only special requirement is that your printer not be bothered by text that lies off the page. This is true of most printers, including laser printers and PostScript printers.\n"
+"Collects together examples that have been posted to the pstricks mailing list, together with many additional features for the basic pstricks, pst-plot and pst-node, including: bugfixes; new options for the pspicture environment; arrows; braces as node connection/linestyle; extended axes for plots (e.g., logarithm axes); polar plots; plotting tangent lines of curves or functions; solving and printing differential equations; box plots; matrix plots; and pie charts. The package makes use of PostScript routines provided by pst-math.\n"
"\n"
-"date: 2010-05-15 20:56:34 +0000"
+"date: 2014-05-18 08:19:00 +0000"
msgstr ""
-#. description(texlive-qtree)
-msgid ""
-"The package offers support for drawing tree diagrams, and is especially suitable for linguistics use. It allows trees to be specified in a simple bracket notation, automatically calculates branch sizes, and supports both DVI/PostScript and PDF output by use of pict2e facilities. The package is a development of the existing qobitree package, offering a new front end.\n"
-"\n"
-"date: 2009-01-24 15:10:54 +0000"
+#. summary(texlive-specs-s:texlive-pstricks-add-doc)
+#, fuzzy
+msgid "Documentation for texlive-pstricks-add"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pstricks-add-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pstricks-add"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pstricks-doc)
+#, fuzzy
+msgid "Documentation for texlive-pstricks"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pstricks-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pstricks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pstricks-examples)
+msgid "PSTricks examples"
msgstr ""
-#. description(texlive-luatexja)
+#. description(texlive-specs-s:texlive-pstricks-examples)
msgid ""
-"The package offers support for typesetting Japanese documents with LuaTeX. Both the Plain and LaTeX2e formats may be used with the package.\n"
+"These are the examples from the 6th edition of the book 'PSTricks -- Grafik fur TeX und LaTeX'.\n"
"\n"
-"date: 2013-05-14 21:58:42 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-newenviron)
-msgid ""
-"The package offers tools for collecting and executing an environment's body.\n"
-"\n"
-"date: 2013-03-10 15:42:24 +0000"
+#. summary(texlive-specs-s:texlive-pstricks-examples-en)
+msgid "Examples from PSTricks book (English edition)"
msgstr ""
-#. description(texlive-underoverlap)
+#. description(texlive-specs-s:texlive-pstricks-examples-en)
msgid ""
-"The package overcomes TeX's inherent limitations in commands that place decorations (such as braces) at arbirary positions over and under expressions, overlapping as necessary.\n"
+"These are the examples from the book 'PSTricks: Graphics and PostScript for TeX and LaTeX'.\n"
"\n"
-"date: 2013-02-03 18:03:00 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lualatex-math)
-msgid ""
-"The package patches a few commands of the LaTeX2e kernel and the amsmath and mathtools packages to be more compatible with the LuaTeX engine. It is only meaningful for LuaLaTeX documents containing mathematical formulas, and does not exhibit any new functionality. The fixes are mostly moved from the unicode-math package to this package since they are not directly related to Unicode mathematics typesetting.\n"
-"\n"
-"date: 2013-03-11 09:36:18 +0000"
+#. summary(texlive-specs-s:texlive-pstricks_calcnotes)
+msgid "Use of PStricks in calculus lecture notes"
msgstr ""
-#. description(texlive-interpreter)
+#. description(texlive-specs-s:texlive-pstricks_calcnotes)
msgid ""
-"The package preprocesses input files to a Lua(La)TeX run, on the fly. The user defines Lua regular expressions to search for patterns and modify input lines (or entire paragraphs) accordingly, before TeX reads the material. In this way, documents may be prepared in a non-TeX language (e.g., some lightweight markup language) and turned into 'proper' TeX for processing. The source of the documentation is typed in such a lightweight language and is thus easily readable in a text editor (the PDF file is also available, of course); the transformation to TeX syntax via Interpreter's functions is explained in the documentation itself. Interpreter is implemented using the author's gates (lua version), and works for plain TeX and LaTeX, but not ConTeXt.\n"
+"The bundle shows the construction of PStricks macros to draw Riemann sums of an integral and to draw the vector field of an ordinary differential equation. The results are illustrated in a fragment of lecture notes.\n"
"\n"
-"date: 2012-06-10 09:15:14 +0000"
+"date: 2014-04-03 14:06:38 +0000"
msgstr ""
-#. description(texlive-turnthepage)
-msgid ""
-"The package prints a 'turn' instruction at the bottom of odd- numbered pages (except the last). This is a common convention for examination papers and the like.\n"
-"\n"
-"date: 2012-08-19 15:38:37 +0000"
+#. summary(texlive-specs-s:texlive-psu-thesis)
+msgid "Package for writing a thesis at Penn State University"
msgstr ""
-#. description(texlive-inputtrc)
+#. description(texlive-specs-s:texlive-psu-thesis)
msgid ""
-"The package produces screen/log messages of the form '<current> INPUTTING <next>' reporting LaTeX input commands (<current> and <next> being file names). The message is indented to reflect the level of input nesting. Tracing may be turned on and off, and the unit of indentation may be adjusted. The implementation somewhat resembles those of packages FiNK and inputfile.\n"
+"The package provides proper page formatting according to the Penn State thesis office guidelines (as of 2004) and automatically formats the front and back matter, title page, and more. A BibTeX style file is also included for the bibliography.\n"
"\n"
-"date: 2012-10-16 08:36:45 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tengwarscript)
+#. summary(texlive-specs-s:texlive-psu-thesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-psu-thesis"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-psu-thesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-psu-thesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-ptex)
+#, fuzzy
+msgid "A TeX system for publishing in Japanese"
+msgstr "Menu systém pro TeX pro X Window System"
+
+#. description(texlive-specs-s:texlive-ptex)
msgid ""
-"The package provides \"mid-level\" access to tengwar fonts, providing good quality output. Each tengwar sign is represented by a command, which will place the sign nicely in relation to previous signs. A transcription package is available from the package's home page: writing all those tengwar commands would quickly become untenable. The package supports the use of a wide variety of tengwar fonts that are available from the net; metric and map files are provided for all the supported fonts.\n"
+"PTeX adds features related to vertical writing, and deals with other problems in typesetting Japanese. A set of additions to a TEXMF tree, for use with PTeX, may be found in package PTeX- texmf. PTeX is distributed as WEB change files.\n"
"\n"
-"date: 2007-05-24 08:43:22 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-storebox)
-msgid ""
-"The package provides \"store boxes\" whose user interface matches that of normal LaTeX \"save boxes\", except that the content of a store box appears at most once in the output PDF file, however often it is used. The present version of the package supports pdfLaTeX and LuaLaTeX; when DVI is output, store boxes behave the same as save boxes.\n"
-"\n"
-"date: 2011-12-21 10:26:33 +0000"
+#. summary(texlive-specs-s:texlive-ptex-doc)
+#, fuzzy
+msgid "Documentation for texlive-ptex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-ptex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ptex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-ptex-fonts)
+msgid "Severed fonts for texlive-ptex"
msgstr ""
-#. description(texlive-tfrupee)
-msgid ""
-"The package provides LaTeX support for the (Indian) Rupee symbol font, created by TechFat. The original font has been converted to Adobe Type 1 format, and simple LaTeX support written for its use.\n"
-"\n"
-"date: 2010-12-16 14:42:40 +0000"
+#. description(texlive-specs-s:texlive-ptex-fonts)
+msgid "The separated fonts package for texlive-ptex"
msgstr ""
-#. description(texlive-quattrocento)
-msgid ""
-"The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Quattrocento and Quattrocento Sans families of fonts, designed by Pablo Impallari; the fonts themselves are also provided, in both Type 1 and OpenType format. Quattrocento is a classic typeface with wide and open letterforms, and great x-height, which makes it very legible for body text at small sizes. Tiny details that only show up at bigger sizes make it also great for display use. Quattrocento Sans is the perfect sans-serif companion for Quattrocento.\n"
-"\n"
-"date: 2012-11-26 00:49:31 +0000"
+#. summary(texlive-specs-s:texlive-ptex2pdf)
+msgid "Convert Japanese TeX documents to PDF"
msgstr ""
-#. description(texlive-threeddice)
+#. description(texlive-specs-s:texlive-ptex2pdf)
msgid ""
-"The package provides MetaPost code to create all possible symmetrical views (up to rotation) of a right-handed die. Configuration is possible by editing the source code, following the guidance in the documentation.\n"
+"The Lua script provides system-independent support of Japanese typesetting engines in TeXworks. As TeXworks typesetting setup does not allow for multistep processing, this script runs one of the ptex-based programs (ptex, uptex, eptex, platex, uplatex) followed by dvipdfmx.\n"
"\n"
-"date: 2010-12-07 12:54:00 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ocg-p)
-msgid ""
-"The package provides OCG (Optional Content Groups) support within a PDF document, replacing the ocg.sty distributed with asymptote. Nested OCGs are supported. The package may be used with PFDLatex and XeLaTeX.\n"
-"\n"
-"date: 2013-01-11 10:30:29 +0000"
+#. summary(texlive-specs-s:texlive-ptex2pdf-doc)
+msgid "Documentation for texlive-ptex2pdf"
msgstr ""
-#. description(texlive-noitcrul)
-msgid ""
-"The package provides a (maths mode) \\underline variant which doesn't impose italics correction at the end.\n"
-"\n"
-"date: 2007-03-10 11:31:42 +0000"
+#. description(texlive-specs-s:texlive-ptex2pdf-doc)
+msgid "This package includes the documentation for texlive-ptex2pdf"
msgstr ""
-#. description(texlive-wsuipa)
-msgid ""
-"The package provides a 7-bit IPA font, as Metafont source, and macros for support under TeXt1 and LaTeX. The fonts (and macros) are now largely superseded by the tipa fonts.\n"
-"\n"
-"date: 2012-01-27 12:33:18 +0000"
+#. summary(texlive-specs-s:texlive-ptext)
+msgid "A 'lipsum' for Persian"
msgstr ""
-#. description(texlive-lisp-on-tex)
+#. description(texlive-specs-s:texlive-ptext)
msgid ""
-"The package provides a LISP interpreter written using TeX macros; it is provided as a LaTeX package. The interpreter static scoping, dynamic typing, and eager evaluation.\n"
+"The package provides lipsum-like facilities for the Persian language. The source of the filling text is the Persian epic \"the Shanameh\" (100 paragraphs are used.) The package needs to be run under XeLaTeX.\n"
"\n"
-"date: 2013-03-04 10:46:28 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-musuos)
-msgid ""
-"The package provides a LaTeX class for typesetting term papers at the institute of music and musicology of the University of Osnabruck, Germany, according to the specifications of Prof. Stefan Hahnheide. A biblatex style is provided.\n"
-"\n"
-"date: 2011-12-07 15:44:29 +0000"
+#. summary(texlive-specs-s:texlive-ptext-doc)
+msgid "Documentation for texlive-ptext"
msgstr ""
-#. description(texlive-microtype)
-msgid ""
-"The package provides a LaTeX interface to the micro-typographic extensions that were introduced by pdfTeX and have since also propagated to XeTeX and LuaTeX: most prominently, character protrusion and font expansion, furthermore the adjustment of interword spacing and additional kerning, as well as hyphenatable letterspacing (tracking) and the possibility to disable all or selected ligatures. These features may be applied to customisable sets of fonts, and all micro- typographic aspects of the fonts can be configured in a straight-forward and flexible way. Settings for various fonts are provided. Note that character protrusion requires pdfTeX, LuaTeX, or XeTeX. Font expansion works with pdfTeX or LuaTeX. The package will by default enable protrusion and expansion if they can safely be assumed to work. Disabling ligatures requires pdfTeX or LuaTeX, while the adjustment of interword spacing and of kerning only works with pdfTeX. Letterspacing is available with pdfTeX or LuaTeX. The a
lternative package `letterspace', which also works with plain TeX, provides the user commands for letterspacing only, omitting support for all other extensions.\n"
-"\n"
-"date: 2013-05-26 19:18:14 +0000"
+#. description(texlive-specs-s:texlive-ptext-doc)
+msgid "This package includes the documentation for texlive-ptext"
msgstr ""
-#. description(texlive-sty2dtx)
-msgid ""
-"The package provides a Perl script that converts a .sty file (LaTeX package) to .dtx format (documented LaTeX source), by surrounding macro definitions with macro and macrocode environments. The macro name is automatically inserted as an argument to the macro environemnt. Code lines outside macro definitions are wrapped only in macrocode environments. Empty lines are removed. The script should not be thought to be fool proof and 100% accurate but rather as a good start to the business of making a .dtx file from an undocumented style file. Full .dtx files are generated. A template based on the skeleton file from 'dtxtut' is used. User level macros are added automatically to the 'Usage' section of the .dtx file. A corresponding .ins file can be generated as well.\n"
-"\n"
-"date: 2012-11-07 19:43:20 +0000"
+#. summary(texlive-specs-s:texlive-ptptex)
+msgid "Macros for 'Progress of Theoretical Physics'"
msgstr ""
-#. description(texlive-mkjobtexmf)
+#. description(texlive-specs-s:texlive-ptptex)
msgid ""
-"The package provides a Perl script, which runs a program and tries to find the names of file used. Two methods are available, option -recorder of (Web2C) TeX and the program strace. Then it generates a directory with a texmf tree. It checks the found files and tries sort them in this texmf tree. The script may be used for archiving purposes or to speed up later TeX runs.\n"
+"The distribution contains the class (which offers an option file for preprints), and a template. The class requires the cite, overcite and wrapfig packages.\n"
"\n"
-"date: 2011-11-16 10:07:17 +0000"
+"date: 2011-11-17 07:52:38 +0000"
msgstr ""
-#. description(texlive-makecmds)
-msgid ""
-"The package provides a \\makecommand command, which is like \\(re)newcommand except it always (re)defines a command. There is also \\makeenvironment and \\provideenvironment for environments.\n"
-"\n"
-"date: 2009-09-03 06:40:46 +0000"
+#. summary(texlive-specs-s:texlive-ptptex-doc)
+#, fuzzy
+msgid "Documentation for texlive-ptptex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-ptptex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ptptex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-punk)
+msgid "Donald Knuth's punk font"
msgstr ""
-#. description(texlive-uspatent)
+#. description(texlive-specs-s:texlive-punk)
msgid ""
-"The package provides a class and other tools for developing a beautifully formatted, consistent U.S. Patent Application using LaTeX and/or LyX.\n"
+"A response to the assertion in a lecture that \"typography tends to lag behind other stylistic changes by about 10 years\". Knuth felt it was (in 1988) time to design a replacement for his designs of the 1970s, and came up with this font! The fonts are distributed as Metafont source. The package offers LaTeX support by Rohit Grover, from an original by Sebastian Rahtz, which is slightly odd in claiming that the fonts are T1- encoded. A (possibly) more rational support package is to be found in punk-latex\n"
"\n"
-"date: 2012-09-19 16:03:54 +0000"
+"date: 2014-05-23 15:29:14 +0000"
msgstr ""
-#. description(texlive-ulthese)
-msgid ""
-"The package provides a class based on memoir to prepare theses and memoirs compliant with the presentation rules set forth by the Faculty of Graduate Studies of Universite Laval, Quebec, Canada. The class also comes with an extensive set of templates for the various types of theses and memoirs offered at Laval. Please note that the documentation for the class and the comments in the templates are all written in French, the language of the target audience.\n"
-"\n"
-"date: 2013-02-04 08:52:53 +0000"
+#. summary(texlive-specs-s:texlive-punk-doc)
+msgid "Documentation for texlive-punk"
msgstr ""
-#. description(texlive-luatextra)
-msgid ""
-"The package provides a coherent extended programming environment for use with luaTeX. It loads packages fontspec, luatexbase and lualibs, and provides additional user-level features and goodies. The package is under development, and its specification may be expected to change.\n"
-"\n"
-"date: 2010-12-14 14:25:48 +0000"
+#. description(texlive-specs-s:texlive-punk-doc)
+msgid "This package includes the documentation for texlive-punk"
msgstr ""
-#. description(texlive-serbian-apostrophe)
-msgid ""
-"The package provides a collection of commands (whose names are Serbian words) whose expansion is the Serbian word with appropriate apostrophes.\n"
-"\n"
-"date: 2011-08-30 12:04:46 +0000"
+#. summary(texlive-specs-s:texlive-punk-latex)
+msgid "LaTeX support for punk fonts"
msgstr ""
-#. description(texlive-tkz-berge)
+#. description(texlive-specs-s:texlive-punk-latex)
msgid ""
-"The package provides a collection of useful macros for drawing classic graphs of graph theory, or to make other graphs.\n"
+"The package and .fd file provide support for Knuth's punk fonts. That bundle also offers support within LaTeX; the present package is to be preferred.\n"
"\n"
-"date: 2011-06-05 22:03:44 +0000"
+"date: 2012-08-14 14:24:07 +0000"
msgstr ""
-#. description(texlive-isotope)
-msgid ""
-"The package provides a command \\isotope for setting the atomic weight and atomic number indications of isotopes. (The naive way of doing the job with (La)TeX mathematics commands produces an unsatisfactory result.)\n"
-"\n"
-"date: 2011-08-26 15:57:53 +0000"
+#. summary(texlive-specs-s:texlive-punk-latex-doc)
+msgid "Documentation for texlive-punk-latex"
msgstr ""
-#. description(texlive-svg)
-msgid ""
-"The package provides a command similar to \\includegraphics command of the graphicx package, which enables the inclusion of SVG images using Inkscape. \\includesvg[options]{svg filename} A variety of options is available, including width, height, and path of the SVG. The image is converted to an appropriate format, using the \\write18 mechanism to execute a shell command, and the package also offers the means of saving a PDF, EPS, or PNG copy of the image, at the same time. The documentation shows an example using an SVG created from the high energy particle physics analysis package ROOT.\n"
-"\n"
-"date: 2012-09-09 17:10:52 +0000"
+#. description(texlive-specs-s:texlive-punk-latex-doc)
+msgid "This package includes the documentation for texlive-punk-latex"
msgstr ""
-#. description(texlive-subsupscripts)
-msgid ""
-"The package provides a comprehensive and flexible set of commands for combinations of left and right sub- and superscripts.\n"
-"\n"
-"date: 2009-11-20 11:24:11 +0000"
+#. summary(texlive-specs-s:texlive-punknova)
+msgid "OpenType version of Knuth's Punk font"
msgstr ""
-#. description(texlive-ordinalpt)
+#. description(texlive-specs-s:texlive-punknova)
msgid ""
-"The package provides a counter style (like \\arabic, \\alph and others) which produces as output strings like \"primeiro\" (\"first\" in Portuguese), \"segundo\" (second), and so on up to 1999th. Separate counter commands are provided for different letter case variants, and for masculine and feminine gender inflections.\n"
+"The font was generated from a MetaPost version of the sources of the 'original' punk font. Knuth's original fonts generated different shapes at random. This isn't actually possible in an OpenType font; rather, the font contains several variants of each glyph, and uses the OpenType randomize function to select a variant for each invocation.\n"
"\n"
-"date: 2007-02-25 08:43:45 +0000"
+"date: 2014-05-23 15:29:14 +0000"
msgstr ""
-#. description(texlive-vwcol)
-msgid ""
-"The package provides a crude environment (vwcol) for typesetting multicolumn paragraph text of various column widths on a single page.\n"
-"\n"
-"date: 2008-08-24 12:43:48 +0000"
+#. summary(texlive-specs-s:texlive-punknova-doc)
+#, fuzzy
+msgid "Documentation for texlive-punknova"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-punknova-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-punknova"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-punknova-fonts)
+msgid "Severed fonts for texlive-punknova"
msgstr ""
-#. description(texlive-unamthesis)
-msgid ""
-"The package provides a customisable format to typeset Theses according to the Universidad Nacional Autonoma de Mexico guidelines. Support for use in Scientific Workplace (SWP) 3.x is also provided. The bundle also includes an appropriate bibliographic style which enables the use of author-year schemes using the natbib package.\n"
-"\n"
-"date: 2013-04-09 22:46:21 +0000"
+#. description(texlive-specs-s:texlive-punknova-fonts)
+msgid "The separated fonts package for texlive-punknova"
msgstr ""
-#. description(texlive-mnotes)
-msgid ""
-"The package provides a flexible mechanism for annotating, and commenting upon, collaboratively-written documents.\n"
-"\n"
-"date: 2013-04-23 06:47:58 +0000"
+#. summary(texlive-specs-s:texlive-purifyeps)
+msgid "Make EPS work with both LaTeX/dvips and pdfLaTeX"
msgstr ""
-#. description(texlive-mdsymbol)
+#. description(texlive-specs-s:texlive-purifyeps)
msgid ""
-"The package provides a font of mathematical symbols, MyriadPro The font is designed as a companion to Adobe Myriad Pro, but it might also fit well with other contemporary typefaces.\n"
+"While pdfLaTeX has a number of nice features, its primary shortcoming relative to standard LaTeX+dvips is that it is unable to read ordinary Encapsulated PostScript (EPS) files, the most common graphics format in the LaTeX world. Purifyeps converts EPS files into a 'purified' form that can be read by both LaTeX+dvips and pdfLaTeX. The trick is that the standard LaTeX2e graphics packages can parse MetaPost-produced EPS directly. Hence, purifyeps need only convert an arbitrary EPS file into the same stylized format that MetaPost outputs.\n"
"\n"
-"date: 2012-11-29 14:59:01 +0000"
+"date: 2012-05-07 14:41:43 +0000"
msgstr ""
-#. description(texlive-newunicodechar)
-msgid ""
-"The package provides a friendly interface for defining the meaning of Unicode characters. The document should be processed by (pdf)LaTeX with the unicode option of inputenc or inputenx, or by XeLaTeX/LuaLaTeX. The command provided is \\newunicodechar{<char>}{<code>} where <char> is a directly- typed Unicode character, and <code> is its replacement.\n"
-"\n"
-"date: 2012-11-13 17:34:11 +0000"
+#. summary(texlive-specs-s:texlive-purifyeps-doc)
+#, fuzzy
+msgid "Documentation for texlive-purifyeps"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-purifyeps-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-purifyeps"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pxbase)
+msgid "Tools for use with (u)pLaTeX"
msgstr ""
-#. description(texlive-stringstrings)
+#. description(texlive-specs-s:texlive-pxbase)
msgid ""
-"The package provides a large and sundry set of macros for the manipulation of strings. The macros are developed not merely for cosmetic application (such as changing the case of letters and string substitution), but also for programming applications such as character look-ahead, argument parsing, conditional tests on various string conditions, etc. The macros were designed all to be expandable (note that things such as \\uppercase and \\lowercase are not expandable), so that the macros may be strung together sequentially and nested (after a fashion) to achieve rather complex manipulations.\n"
+"The pxbase package\n"
"\n"
-"date: 2012-10-09 22:01:11 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tikz-bayesnet)
-msgid ""
-"The package provides a library supporting the display of Bayesian networks, graphical models and (directed) factor graphs in LaTeX.\n"
-"\n"
-"date: 2013-04-24 09:34:47 +0000"
+#. summary(texlive-specs-s:texlive-pxbase-doc)
+msgid "Documentation for texlive-pxbase"
msgstr ""
-#. description(texlive-tikz-dependency)
-msgid ""
-"The package provides a library that draws together existing TikZ facilities to make a comfortable environment for drawing dependency graphs. Basic facilities of the package include a lot of styling facilities, to let you personalize the look and feel of the graphs.\n"
-"\n"
-"date: 2012-01-19 18:15:33 +0000"
+#. description(texlive-specs-s:texlive-pxbase-doc)
+msgid "This package includes the documentation for texlive-pxbase"
msgstr ""
-#. description(texlive-inlinedef)
-msgid ""
-"The package provides a macro \\Inline. that precedes a \\def or \\gdef. Within the definition text of an inlined definition, keywords such as \\Expand may be used to selectively inline certain expansions at definition-time. This eases the process of redefining macros in terms of the original definition, as well as definitions in which the token that must be expanded is deep within, where \\expandafter would be difficult and \\edef is not suitable. Another application is as an easier version of \\aftergroup, by defining a macro in terms of expanded local variables, then ending the group with \\expandafter\\endgroup\\macro.\n"
-"\n"
-"date: 2008-08-19 21:32:24 +0000"
+#. summary(texlive-specs-s:texlive-pxchfon)
+msgid "Japanese font setup for pLaTeX and upLaTeX"
msgstr ""
-#. description(texlive-pst-bezier)
+#. description(texlive-specs-s:texlive-pxchfon)
msgid ""
-"The package provides a macro \\psbcurve for drawing a Bezier curve. Provision is made for full control of over all the control points of the curve.\n"
+"The pxchfon package\n"
"\n"
-"date: 2009-02-01 16:37:35 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-snotez)
-msgid ""
-"The package provides a macro \\sidenote, that places a note in the margin of the document, with its baseline aligned with the baseline in the body of the document. These sidenotes are numbered (both in the text, and on the notes themselves). The package loads the package etoolbox, pgfopts, marginnote and perpage.\n"
-"\n"
-"date: 2013-05-09 11:28:31 +0000"
+#. summary(texlive-specs-s:texlive-pxchfon-doc)
+msgid "Documentation for texlive-pxchfon"
msgstr ""
-#. description(texlive-tikz-qtree)
-msgid ""
-"The package provides a macro for drawing trees with TikZ using the easy syntax of Alexis Dimitriadis' Qtree. It improves on TikZ's standard tree-drawing facility by laying out tree nodes without collisions; it improves on Qtree by adding lots of features from TikZ (for example, edge labels, arrows between nodes); and it improves on pst-qtree in being usable with pdfTeX and XeTeX.\n"
-"\n"
-"date: 2012-04-23 09:23:52 +0000"
+#. description(texlive-specs-s:texlive-pxchfon-doc)
+msgid "This package includes the documentation for texlive-pxchfon"
msgstr ""
-#. description(texlive-xetex-devanagari)
-msgid ""
-"The package provides a map for use with Jonathan Kew's TECkit, to translate Devanagari (encoded according to the Harvard/Kyoto convention) to Unicode (range 0900-097F).\n"
-"\n"
-"date: 2011-07-22 05:52:25 +0000"
+#. summary(texlive-specs-s:texlive-pxcjkcat)
+msgid "LaTeX interface for the CJK category codes of upTeX"
msgstr ""
-#. description(texlive-xetex-tibetan)
+#. description(texlive-specs-s:texlive-pxcjkcat)
msgid ""
-"The package provides a map for use with Jonathan Kew's TECkit, to translate Tibetan to Unicode (range 0F00-0FFF).\n"
+"The package provides management of the CJK category code ('kcatcode'> table of the upTeX extended TeX engine. Package options are available for tailored use in the cases of documents that are principally written in Japanese, or principally written in English or other Western languages.\n"
"\n"
-"date: 2013-01-15 17:22:19 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-layout)
-msgid ""
-"The package provides a means of creating elaborate (\"pseudo- tabular\") layouts of material, typically to be overlaid on an included graphic. The package requires a recent version of the package pst-node and some other pstricks-related material.\n"
-"\n"
-"date: 2012-04-27 10:45:13 +0000"
+#. summary(texlive-specs-s:texlive-pxcjkcat-doc)
+msgid "Documentation for texlive-pxcjkcat"
msgstr ""
-#. description(texlive-slideshow)
-msgid ""
-"The package provides a means of creating presentations in MetaPost, without intervention from other utilities (except a distiller). Such an arrangement has its advantages (though there are disadvantages too).\n"
-"\n"
-"date: 2008-12-04 13:14:32 +0000"
+#. description(texlive-specs-s:texlive-pxcjkcat-doc)
+msgid "This package includes the documentation for texlive-pxcjkcat"
msgstr ""
-#. description(texlive-quotmark)
-msgid ""
-"The package provides a means of ensuring consistent quote marks throughout your document. The style can be changed either via package option or command. The package detects if babel or ngerman have been loaded, and will use the punctuation marks appropriate for the current language.\n"
-"\n"
-"date: 2008-08-24 08:50:19 +0000"
+#. summary(texlive-specs-s:texlive-pxfonts)
+msgid "Palatino-like fonts in support of mathematics"
msgstr ""
-#. description(texlive-listings-ext)
+#. description(texlive-specs-s:texlive-pxfonts)
msgid ""
-"The package provides a means of marking a source, so that samples of it may be included in a document (by means of the listings package) in a stable fashion, regardless of any change to the source. The markup in the source text defines tags for blocks of source. These tags are processed by a shell script to make a steering file that is used by the package when LaTeX is being run.y\n"
+"Pxfonts supplies virtual text roman fonts using Adobe Palatino (or URWPalladioL) with some modified and additional text symbols in the OT1, T1, and TS1 encodings; maths alphabets using Palatino/Palladio; maths fonts providing all the symbols of the Computer Modern and AMS fonts, including all the Greek capital letters from CMR; and additional maths fonts of various other symbols. The set is complemented by a sans-serif set of text fonts, based on Helvetica/NimbusSanL, and a monospace set derived from the parallel TX font set. All the fonts are in Type 1 format (AFM and PFB files), and are supported by TeX metrics (VF and TFM files) and macros for use with LaTeX.\n"
"\n"
-"date: 2012-04-21 18:14:11 +0000"
+"date: 2014-05-24 10:23:46 +0000"
msgstr ""
-#. description(texlive-songs)
-msgid ""
-"The package provides a means of producing beautiful song books for church or fellowship. It offers: - a very easy chord-entry syntax; - multiple modes (words-only; words+chords; slides; handouts); - measure bars; - guitar tablatures; - automatic transposition; - scripture quotations; - multiple indexes (sorted by title, author, important lyrics, or scripture references); and - projector-style output generation, for interactive use. A set of example documents is provided.\n"
-"\n"
-"date: 2012-04-22 19:38:25 +0000"
+#. summary(texlive-specs-s:texlive-pxfonts-doc)
+#, fuzzy
+msgid "Documentation for texlive-pxfonts"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pxfonts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pxfonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pxfonts-fonts)
+msgid "Severed fonts for texlive-pxfonts"
msgstr ""
-#. description(texlive-typeoutfileinfo)
-msgid ""
-"The package provides a minimalist shell script, for Unix systems, that displays the information content in a \\ProvidesFile, \\ProvidesPackage or \\ProvidesClass command in a LaTeX source file. The package requires that the readprov package is available.\n"
-"\n"
-"date: 2012-09-28 13:59:23 +0000"
+#. description(texlive-specs-s:texlive-pxfonts-fonts)
+msgid "The separated fonts package for texlive-pxfonts"
msgstr ""
-#. description(texlive-plipsum)
-msgid ""
-"The package provides a paragraph generator designed for use in Plain TeX documents. The paragraphs generated contain many 'f- groups' (ff, fl etc.) so the text can act as a test of the ligatures of the font in use.\n"
-"\n"
-"date: 2013-05-09 09:57:32 +0000"
+#. summary(texlive-specs-s:texlive-pxgreeks)
+msgid "Shape selection for PX fonts Greek letters"
msgstr ""
-#. description(texlive-pst-qtree)
+#. description(texlive-specs-s:texlive-pxgreeks)
msgid ""
-"The package provides a qtree-like front end for PSTricks.\n"
+"The package allows LaTeX maths users of the PX fonts to select the shapes (italic or upright) for the Greek lowercase and uppercase letters. Once the shapes for lowercase and uppercase have been selected via a package option, the \\other prefix (e.g., \\otheralpha) allows using the alternate glyph (as in the fourier package). The pxgreeks package does not constrain the text font that may be used in the document.\n"
"\n"
-"date: 2009-09-20 11:03:55 +0000"
+"date: 2014-05-24 10:23:46 +0000"
msgstr ""
-#. description(texlive-keyreader)
-msgid ""
-"The package provides a robust interface to controlling keys in xkeyval, removing some of that package's restrictions. The package also addresses some of the issues now covered by the author's ltxkeys package, which was assumed to be a replacement for keyreader. Since keyreader has remained a favourite with users, it has been reinstated.\n"
-"\n"
-"date: 2012-11-06 19:07:31 +0000"
+#. summary(texlive-specs-s:texlive-pxgreeks-doc)
+#, fuzzy
+msgid "Documentation for texlive-pxgreeks"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pxgreeks-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pxgreeks"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-pxjahyper)
+msgid "Hyperref support for pLaTeX"
msgstr ""
-#. description(texlive-texliveonfly)
+#. description(texlive-specs-s:texlive-pxjahyper)
msgid ""
-"The package provides a script that performs 'on the fly' downloads of missing packages, while a document is being compiled. (This feature is already available in the MikTeX distribution for Windows machines.) To use the script, replace your (LaTeX) compilation command with texliveonfly.py file.tex (default options are --engine=lualatex and --arguments=\"- synctex=1 -interaction=nonstopmode\", both of which may be changed). The script is designed to work on Linux distributions.\n"
+"The pxjahyper package\n"
"\n"
-"date: 2011-10-04 09:31:57 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-skmath)
-msgid ""
-"The package provides a selection of new maths commands and improved re-definitions of existing commands.\n"
-"\n"
-"date: 2013-05-26 17:01:07 +0000"
+#. summary(texlive-specs-s:texlive-pxjahyper-doc)
+msgid "Documentation for texlive-pxjahyper"
msgstr ""
-#. description(texlive-multiobjective)
-msgid ""
-"The package provides a series of operators commonly used in papers related to multiobjective optimisation, multiobjective evolutionary algorithms, multicriteria decision making and similar fields.\n"
-"\n"
-"date: 2008-09-09 09:27:07 +0000"
+#. description(texlive-specs-s:texlive-pxjahyper-doc)
+msgid "This package includes the documentation for texlive-pxjahyper"
msgstr ""
-#. description(texlive-oinuit)
-msgid ""
-"The package provides a set of Lambda (Omega LaTeX) typesetting tools for the Inuktitut language. Five different input methods are supported and with the necessary fonts are also provided.\n"
-"\n"
-"date: 2012-06-16 08:52:26 +0000"
+#. summary(texlive-specs-s:texlive-pxpgfmark)
+msgid "E-pTeX driver for PGF inter-picture connections"
msgstr ""
-#. description(texlive-synproof)
+#. description(texlive-specs-s:texlive-pxpgfmark)
msgid ""
-"The package provides a set of macros based on PSTricks that will enable you to draw syntactic proofs easily (inspired by the Gamut books). Very few commands are needed, however fine tuning of the various parameters (dimensions) can still be achieved through \"key=value\" pairs.\n"
+"The distributed drivers do not support the PGF feature of \"inter-picture connections\" under e-pTeX and dvipdfmx. The package uses existing features of dvipdfmx to fix this problem\n"
"\n"
-"date: 2009-07-05 15:22:22 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-pdgr)
-msgid ""
-"The package provides a set of macros based on PSTricks to draw medical pedigrees according to the recommendations for standardized human pedigree nomenclature. The drawing commands place the symbols on a pspicture canvas. An interface for making trees is also provided. The package may be used both with LaTeX and PlainTeX. A separate Perl program for generating TeX files from spreadsheets is available.\n"
-"\n"
-"date: 2007-08-14 10:06:32 +0000"
+#. summary(texlive-specs-s:texlive-pxpgfmark-doc)
+msgid "Documentation for texlive-pxpgfmark"
msgstr ""
-#. description(texlive-schemabloc)
-msgid ""
-"The package provides a set of macros for constructing block diagrams, using TikZ.\n"
-"\n"
-"date: 2009-01-23 10:09:06 +0000"
+#. description(texlive-specs-s:texlive-pxpgfmark-doc)
+msgid "This package includes the documentation for texlive-pxpgfmark"
msgstr ""
-#. description(texlive-oscola)
-msgid ""
-"The package provides a set of style files for use with Biblatex (v 2+) and Biber (v 1+) to produce citations and bibliographies in accordance with the widely-used Oxford Standard for the Citation of Legal Authorities. It also includes facilities for constructing tables of cases and legislation from citations (in conjunction with appropriate indexing packages).\n"
-"\n"
-"date: 2013-05-24 18:35:56 +0000"
+#. summary(texlive-specs-s:texlive-pxrubrica)
+msgid "Package pxrubrica"
msgstr ""
-#. description(texlive-shade)
-msgid ""
-"The package provides a shaded backdrop to a box of text. It uses a Metafont font (provided) which generates to appropriate shading dependent on the resolution used in the Metafont printer parameters.\n"
-"\n"
-"date: 2011-04-25 20:01:30 +0000"
+#. description(texlive-specs-s:texlive-pxrubrica)
+msgid "The pxrubrica package"
msgstr ""
-#. description(texlive-simplewick)
-msgid ""
-"The package provides a simple means of drawing Wick contractions above and below expressions.\n"
-"\n"
-"date: 2008-08-23 13:48:35 +0000"
+#. summary(texlive-specs-s:texlive-pxrubrica-doc)
+msgid "Documentation for texlive-pxrubrica"
msgstr ""
-#. description(texlive-pkuthss)
-msgid ""
-"The package provides a simple, clear and flexible LaTeX template for dissertations in Peking University.\n"
-"\n"
-"date: 2013-04-08 08:17:07 +0000"
+#. description(texlive-specs-s:texlive-pxrubrica-doc)
+msgid "This package includes the documentation for texlive-pxrubrica"
msgstr ""
-#. description(texlive-syllogism)
-msgid ""
-"The package provides a simple, configurable, way for neatly typesetting syllogisms and syllogistic-like arguments, composed of two premises and a conclusion.\n"
-"\n"
-"date: 2008-10-28 10:39:06 +0000"
+#. summary(texlive-specs-s:texlive-pxtxalfa)
+msgid "Virtual maths alphabets based on pxfonts and txfonts"
msgstr ""
-#. description(texlive-randtext)
+#. description(texlive-specs-s:texlive-pxtxalfa)
msgid ""
-"The package provides a single macro \\randomize{TEXT} that typesets the characters of TEXT in random order, such that the resulting output appears correct, but most automated attempts to read the file will misunderstand it. This function allows one to include an email address in a TeX document and publish it online without fear of email address harvesters or spammers easily picking up the address.\n"
+"The package provides virtual math alphabets based on pxfonts and txfonts, with LaTeX support files and adjusted metrics. The mathalfa package offers support for this collection.\n"
"\n"
-"date: 2007-02-25 23:17:56 +0000"
+"date: 2014-05-24 12:29:45 +0000"
msgstr ""
-#. description(texlive-interfaces)
-msgid ""
-"The package provides a small number of convenient macros that access features in other frequently-used packages, or provide interfaces to other useful facilities such as the pdfTeX \\pdfelapsedtime primitive. Most of these macros use pgfkeys to provide a key-value syntax. The package also uses the package scrlfile from the Koma-Script bundle (for controlled loading of other files) and etoolbox. The package is bundled with sub- packages containing actual interfaces: by default, the package loads all available sub-packages, but techniques are provided for the user to select no more than the interfaces needed for a job.\n"
-"\n"
-"date: 2011-02-19 15:41:47 +0000"
+#. summary(texlive-specs-s:texlive-pxtxalfa-doc)
+#, fuzzy
+msgid "Documentation for texlive-pxtxalfa"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pxtxalfa-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pxtxalfa"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-python)
+msgid "Embed Python code in LaTeX"
msgstr ""
-#. description(texlive-stack)
+#. description(texlive-specs-s:texlive-python)
msgid ""
-"The package provides a small set of commands to implement stacks independently of TeX's own stack. As an example of how the stacks might be used, the documentation offers a small \"relinput\" package that implements the backbone of the import package.\n"
+"The package enables you to embed Python code in LaTeX, and insert the script's output in the document.\n"
"\n"
-"date: 2007-02-27 23:02:05 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-verbatimbox)
-msgid ""
-"The package provides a verbbox environment (which uses techniques similar to those of the boxedverbatim environment of the moreverb package) to place its contents into a globally available box, or into a box specified by the user. The global box may then be used in a variety of situations (for example, providing a replica of the boxedverbatim environment itself). A valuable use is in places where the standard verbatim environment (which is based on a trivlist) may not appear. The package makes use of the verbatim package (which is a required part of any LaTeX distribution).\n"
-"\n"
-"date: 2013-04-25 15:40:06 +0000"
+#. summary(texlive-specs-s:texlive-python-doc)
+msgid "Documentation for texlive-python"
msgstr ""
-#. description(texlive-pst-graphicx)
-msgid ""
-"The package provides a version of graphicx that avoids loading the graphics bundle's (original) keyval package, which clashes with pstricks' use of xkeyval.\n"
-"\n"
-"date: 2011-03-14 09:28:00 +0000"
+#. description(texlive-specs-s:texlive-python-doc)
+msgid "This package includes the documentation for texlive-python"
msgstr ""
-#. description(texlive-technics)
-msgid ""
-"The package provides a very simple LaTeX document template, in the hope that this use of LaTeX will become attractive to typical word processor users. (Presentation is as if it were a class; users are expected to start from a template document.)\n"
-"\n"
-"date: 2012-08-30 23:04:09 +0000"
+#. summary(texlive-specs-s:texlive-pythontex)
+msgid "Run Python from within a document, typesetting the results"
msgstr ""
-#. description(texlive-susy)
+#. description(texlive-specs-s:texlive-pythontex)
msgid ""
-"The package provides abbreviations of longer expressions.\n"
+"The package allows you to enter Python code within a LaTeX document, execute the code, and access its output in the original document. Python code is only executed when it has been modified, or when it meets user-specified criteria. Code may be divided into user-defined sessions, which automatically run in parallel. Errors and warnings are synchronized with the LaTeX document, so that they refer to the document's line numbers. External dependencies can be tracked, so that code is re-executed when the data it depends on is modified. PythonTeX also provides syntax highlighting for code in LaTeX documents via the Pygments syntax highlighter. The package provides a depythontex utility, that creates a copy of the document in which all Python code has been replaced by its output. This is useful for journal submissions, sharing documents, and conversion to other formats.\n"
"\n"
-"date: 2008-08-23 20:26:13 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-latexfileinfo-pkgs)
-msgid ""
-"The package provides an HTML file that lists and compares CTAN packages that display LaTeX source file information from \\ProvidesClass, \\ProvidesFile, and \\ProvidesPackage commands in the LaTeX file. Five packages of the author's, and several other packages are discussed; revision control systems are mentioned briefly.\n"
-"\n"
-"date: 2012-05-30 12:24:48 +0000"
+#. summary(texlive-specs-s:texlive-pythontex-doc)
+#, fuzzy
+msgid "Documentation for texlive-pythontex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-pythontex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-pythontex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-qcm)
+msgid "A LaTeX2e class for making multiple choice questionnaires"
msgstr ""
-#. description(texlive-ulem)
+#. description(texlive-specs-s:texlive-qcm)
msgid ""
-"The package provides an \\ul (underline) command which will break over line ends; this technique may be used to replace \\em (both in that form and as the \\emph command), so as to make output look as if it comes from a typewriter. The package also offers double and wavy underlining, and striking out (line through words) and crossing out (/// over words). The package works with both Plain TeX and LaTeX.\n"
+"QCM is a package for making multiple choices questionnaires under LaTeX2e (\"QCM\" is the French acronym for this style of test). A special environment allows you to define questions and possible answers. You can specify which answers are correct and which are not. QCM not only formats the questions for you, but also generates a 'form' (a grid that your students will have to fill in), and a 'mask' (the same grid, only with correct answers properly checked in). You can then print the mask on a slide and correct the questionnaires more easily by superimposing the mask on top of students' forms. QCM can also typeset exam corrections automatically, and comes with support for AUC-TeX.\n"
"\n"
-"date: 2012-06-01 09:43:10 +0000"
+"date: 2012-05-07 15:18:59 +0000"
msgstr ""
-#. description(texlive-songbook)
+#. summary(texlive-specs-s:texlive-qcm-doc)
+#, fuzzy
+msgid "Documentation for texlive-qcm"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-qcm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-qcm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-qobitree)
+#, fuzzy
+msgid "LaTeX macros for typesetting trees"
+msgstr "TeXová makra pro šachové diagramy"
+
+#. description(texlive-specs-s:texlive-qobitree)
msgid ""
-"The package provides an all purpose songbook style. Three types of output may be created from a single input file: \"words and chords\" books for the musicians to play from, \"words only\" songbooks for the congregation to sing from, and overhead transparency masters for congregational use. The package will also print a table of contents, an index sorted by title and first line, and an index sorted by key, or by artist/composer. The package attempts to handle songs in multiple keys, as well as songs in multiple languages.\n"
+"Provides commands \\branch and \\leaf for specifying the elements of the tree; you build up your tree with those commands, and then issue the \\tree command to typeset the whole.\n"
"\n"
-"date: 2010-05-06 11:38:32 +0000"
+"date: 2012-01-20 10:26:32 +0000"
msgstr ""
-#. description(texlive-modiagram)
-msgid ""
-"The package provides an environment MOdiagram and some commands, to create molecular orbital diagrams using TikZ. For example, the MO diagram of dihydrogen would be written as: \\begin{MOdiagram} \\atom{left}{ 1s = {0;up} } \\atom{right}{ 1s = {0;up} } \\molecule{ 1sMO = {1;pair, } } \\end{MOdiagram} The package also needs the l3kernel and l3packages bundles from the LaTeX 3 experimental distribution.\n"
-"\n"
-"date: 2013-04-28 21:24:16 +0000"
+#. summary(texlive-specs-s:texlive-qobitree-doc)
+#, fuzzy
+msgid "Documentation for texlive-qobitree"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-qobitree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-qobitree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-qpxqtx)
+msgid "Package qpxqtx"
+msgstr "Balíček qpxqtx"
+
+#. description(texlive-specs-s:texlive-qpxqtx)
+msgid "The qpxqtx package"
msgstr ""
-#. description(texlive-tcolorbox)
-msgid ""
-"The package provides an environment for coloured and framed text boxes with a heading line. Optionally, such a box can be split in an upper and a lower part; thus the package may be used for the setting of LaTeX examples where one part of the box displays the source code and the other part shows the output. Another common use case is the setting of theorems. The package supports saving and reuse of source code and text parts.\n"
-"\n"
-"date: 2013-05-16 17:39:08 +0000"
+#. summary(texlive-specs-s:texlive-qpxqtx-doc)
+#, fuzzy
+msgid "Documentation for texlive-qpxqtx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-qpxqtx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-qpxqtx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-qstest)
+msgid "Bundle for unit tests and pattern matching"
msgstr ""
-#. description(texlive-pgfgantt)
+#. description(texlive-specs-s:texlive-qstest)
msgid ""
-"The package provides an environment for drawing Gantt charts that contain various elements (titles, bars, milestones, groups and links). Several keys customize the appearance of the chart elements.\n"
+"This is the public release of the qstest bundle (written for DocScape Publisher) (C) 2006, 2007 QuinScape GmbH. The bundle contains the packages 'makematch' for matching patterns to targets (with a generalization in the form of pattern lists and keyword lists), and 'qstest' for performing unit tests, allowing the user to run a number of logged tests ensuring the consistency of values, properties and call sequences during execution of test code. Both packages make extensive use of in their package documentation, providing illustrated examples that are automatically verified to work as expected. Check the README file for details.\n"
"\n"
-"date: 2012-01-26 10:19:33 +0000"
+"date: 2012-05-07 15:18:59 +0000"
msgstr ""
-#. description(texlive-verbments)
-msgid ""
-"The package provides an environment for syntax highlighting source code in LaTeX documents. The highlighted source code output is formatted via powerful Pygments library of the Python language.\n"
-"\n"
-"date: 2011-08-23 05:18:10 +0000"
+#. summary(texlive-specs-s:texlive-qstest-doc)
+#, fuzzy
+msgid "Documentation for texlive-qstest"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-qstest-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-qstest"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-qsymbols)
+msgid "Maths symbol abbreviations"
msgstr ""
-#. description(texlive-tabu)
+#. description(texlive-specs-s:texlive-qsymbols)
msgid ""
-"The package provides an environment, tabu, which will make any sort of tabular (that doesn't need to split across pages), and an environment longtabu which provides the facilities of tabu in a modified longtable environment. (Note that this latter offers an enhancement of ltxtable.) The package requires the array package, and needs e-TeX to run (since array.sty is present in every conforming distribution of LaTeX, and since every publicly available LaTeX format is built using e-TeX, the requirements are provided by default on any reasonable system). The package also requires xcolor for coloured rules in tables, and colortbl for coloured cells. The longtabu environment further requires that longtable be loaded. The package itself does not load any of these packages for the user. The tabu environment may be used in place of tabular, tabular* and tabularx environments, as well as the array environment in maths mode. It overloads tabularx's X-column specification, allowing a width spec
ification, alignment (l, r, c and j) and column type indication (p, m and b). \\begin{tabu} to <dimen> specifies a target width, and \\begin{tabu} spread <dimen> enlarges the environment's \"natural\" width.\n"
+"Provides macros for defining systematic mnemonic abbreviations, starting with ` for math symbols and \\\" for arrows, using standard symbols as well as those from the amsfonts bundle and the stmaryrd package.\n"
"\n"
-"date: 2011-02-27 11:23:54 +0000"
+"date: 2012-05-07 15:18:59 +0000"
msgstr ""
-#. description(texlive-xetex-pstricks)
+#. summary(texlive-specs-s:texlive-qsymbols-doc)
+#, fuzzy
+msgid "Documentation for texlive-qsymbols"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-qsymbols-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-qsymbols"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-qtree)
+#, fuzzy
+msgid "Draw tree structures"
+msgstr "Úhledný tisk mailů"
+
+#. description(texlive-specs-s:texlive-qtree)
msgid ""
-"The package provides an indirection scheme for XeTeX to use the pstricks xdvipdfmx.cfg configuration file, so that XeTeX documents will load it in preference to the standard pstricks.con configuration file. With this configuration, many PSTricks features can be used in xelatex or plain xetex documents.\n"
+"The package offers support for drawing tree diagrams, and is especially suitable for linguistics use. It allows trees to be specified in a simple bracket notation, automatically calculates branch sizes, and supports both DVI/PostScript and PDF output by use of pict2e facilities. The package is a development of the existing qobitree package, offering a new front end.\n"
"\n"
-"date: 2010-02-18 13:04:58 +0000"
+"date: 2012-06-01 14:25:13 +0000"
msgstr ""
-#. description(texlive-media9)
-msgid ""
-"The package provides an interface to embed interactive Flash (SWF) and 3D objects (Adobe U3D & PRC), as well as video and sound files or streams in the popular MP4, FLV and MP3 formats into PDF documents with Acrobat-9/X compatibility. Playback of multimedia files uses the built-in Flash Player of Adobe Reader and does, therefore, not depend on external plug-ins. Flash Player supports the efficient H.264 codec for video compression. The package is based on the RichMedia Annotation, an Adobe addition to the PDF specification. It replaces the now obsolete movie15 package.\n"
-"\n"
-"date: 2013-03-20 10:32:41 +0000"
+#. summary(texlive-specs-s:texlive-qtree-doc)
+#, fuzzy
+msgid "Documentation for texlive-qtree"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-qtree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-qtree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-quattrocento)
+msgid "LaTeX support for Quattrocento and Quattrocento Sans fonts"
msgstr ""
-#. description(texlive-minifp)
+#. description(texlive-specs-s:texlive-quattrocento)
msgid ""
-"The package provides basic arithmetic operations to 8 decimal places for plain TeX or LaTeX. Results are exact when they fit within the digit limits. Along with the basic package is an optional extension that adds computation of sin, cos, log, sqrt, exp, powers and angles. These are also exact when theoretically possible and are otherwise accurate to at least 7 decimal places. In addition, the package provides a stack-based programing environment.\n"
+"The package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the Quattrocento and Quattrocento Sans families of fonts, designed by Pablo Impallari; the fonts themselves are also provided, in both Type 1 and OpenType format. Quattrocento is a classic typeface with wide and open letterforms, and great x-height, which makes it very legible for body text at small sizes. Tiny details that only show up at bigger sizes make it also great for display use. Quattrocento Sans is the perfect sans-serif companion for Quattrocento.\n"
"\n"
-"date: 2013-01-26 19:44:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-metre)
-msgid ""
-"The package provides classicists with some of the tools that are needed for typesetting scholarly publications dealing with Greek and Latin texts, with special emphasis on Greek verse. As the package's name suggests, its core is a comprehensive set of commands for generating metrical schemes and for placing prosodical marks on text set in the Latin or the Greek alphabet. The rest of the package provides a miscellany of commands for symbols (most of them not directly related to metre) that are often used in critical editions of classical texts. The package does not require any special font: all symbols are taken from the Computer Modern fonts (which are included in all TeX distributions) and the package's commands are based on TeX primitives.\n"
-"\n"
-"date: 2007-03-09 21:25:45 +0000"
+#. summary(texlive-specs-s:texlive-quattrocento-doc)
+msgid "Documentation for texlive-quattrocento"
msgstr ""
-#. description(texlive-pst-mirror)
-msgid ""
-"The package provides commands and supporting PostScript material for drawing images as if reflected by a spherical mirror.\n"
-"\n"
-"date: 2009-12-14 15:47:24 +0000"
+#. description(texlive-specs-s:texlive-quattrocento-doc)
+msgid "This package includes the documentation for texlive-quattrocento"
msgstr ""
-#. description(texlive-tucv)
-msgid ""
-"The package provides commands for typesetting a CV or resume. It provides commands for general-purpose headings, entries, and item/description pairs, as well as more specific commands for formatting sections, with explicit inclusion of school, degree, employer, job, conference, and publications entries. It tends to produce a somewhat long and quite detailed document but may also be suitable to support a shorter resume.\n"
-"\n"
-"date: 2010-12-06 20:43:44 +0000"
+#. summary(texlive-specs-s:texlive-quattrocento-fonts)
+msgid "Severed fonts for texlive-quattrocento"
msgstr ""
-#. description(texlive-mychemistry)
-msgid ""
-"The package provides commands for typesetting complex chemical reaction schemes with LaTeX and ChemFig. The package requires the packages ChemFig, mhchem, chemcompounds and (sometimes) chemexec.\n"
-"\n"
-"date: 2012-12-21 19:05:59 +0000"
+#. description(texlive-specs-s:texlive-quattrocento-fonts)
+msgid "The separated fonts package for texlive-quattrocento"
msgstr ""
-#. description(texlive-musixguit)
-msgid ""
-"The package provides commands for typesetting notes for guitar, especially for simplifying guitar notation with MusixTeX.\n"
-"\n"
-"date: 2011-03-07 20:34:56 +0000"
+#. summary(texlive-specs-s:texlive-quotchap)
+msgid "Decorative chapter headings"
msgstr ""
-#. description(texlive-moderntimeline)
+#. description(texlive-specs-s:texlive-quotchap)
msgid ""
-"The package provides commands to configure and to draw time line diagrams; such diagrams are designed to fit into Curriculum Vitae documents written using the moderncv class.\n"
+"A package for creating decorative chapter headings with quotations. Uses graphical and coloured output and by default needs the \"Adobe standard font set\" (as supported by psnfss).\n"
"\n"
-"date: 2012-01-17 09:30:09 +0000"
+"date: 2012-10-20 20:28:24 +0000"
msgstr ""
-#. description(texlive-sseq)
-msgid ""
-"The package provides commands to draw spectral sequence diagrams, providing facilities for clipping and arranging multiple symbols so that they do not overlap. The package is built using pgf, and shares that systems large demands for TeX system memory. Its geometric commands are based on a turtle graphics model, and control structures such as loops and conditionals are available.\n"
-"\n"
-"date: 2009-04-10 13:43:04 +0000"
+#. summary(texlive-specs-s:texlive-quotchap-doc)
+#, fuzzy
+msgid "Documentation for texlive-quotchap"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-quotchap-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-quotchap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-quoting)
+msgid "Consolidated environment for displayed text"
msgstr ""
-#. description(texlive-plstmary)
+#. description(texlive-specs-s:texlive-quoting)
msgid ""
-"The package provides commands to produce all the symbols of the St Mary's Road fonts, in a Plain TeX environment.\n"
+"As an alternative to the LaTeX standard environments quotation and quote, the package provides a consolidated environment for displayed text. First-line indentation may be activated by adding a blank line before the quoting environment. A key-value interface (using kvoptions) allows the user to configure font properties and spacing and to control orphans within and after the environment.\n"
"\n"
-"date: 2013-05-10 08:43:41 +0000"
+"date: 2014-01-29 16:50:59 +0000"
msgstr ""
-#. description(texlive-lmake)
-msgid ""
-"The package provides commands to simplify processing of sequential list-like structures, such as making a series of 'similar' commands from a list of names.\n"
-"\n"
-"date: 2012-03-01 23:29:05 +0000"
+#. summary(texlive-specs-s:texlive-quoting-doc)
+#, fuzzy
+msgid "Documentation for texlive-quoting"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-quoting-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-quoting"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-quotmark)
+msgid "Consistent quote marks"
msgstr ""
-#. description(texlive-zhnumber)
+#. description(texlive-specs-s:texlive-quotmark)
msgid ""
-"The package provides commands to typeset Chinese representations of numbers. The main difference between this package and CJKnumb is that the commands provided are expandable in the 'proper' way.\n"
+"The package provides a means of ensuring consistent quote marks throughout your document. The style can be changed either via package option or command, and the package detects language selections (from the babel or ngerman packages), and uses the punctuation marks appropriate for the current language. The author now considers the package obsolete, and recommends use of csquotes in its place.\n"
"\n"
-"date: 2012-11-23 23:28:04 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tkz-tab)
-msgid ""
-"The package provides comprehensive facilities for preparing lists of signs and variations, using PGF. The package documentation requires the tkz-doc bundle.\n"
-"\n"
-"date: 2011-06-05 21:10:23 +0000"
+#. summary(texlive-specs-s:texlive-quotmark-doc)
+#, fuzzy
+msgid "Documentation for texlive-quotmark"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-quotmark-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-quotmark"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-r_und_s)
+msgid "Chemical hazard codes"
msgstr ""
-#. description(texlive-jlabels)
+#. description(texlive-specs-s:texlive-r_und_s)
msgid ""
-"The package provides controls for the numbers of rows and columns.\n"
+"The r_und_s package decodes the german 'R- und S-Satze', which are numerically coded security advice for chemical substances into plain text. This is, e.g., used to compose security sheets or lab protocols and especially useful for students of chemistry. There are four packages, giving texts in German, English, French and Dutch.\n"
"\n"
-"date: 2011-12-16 15:22:52 +0000"
+"date: 2013-06-19 09:01:13 +0000"
msgstr ""
-#. description(texlive-loops)
-msgid ""
-"The package provides efficient looping macros for processing both csv (separated-values) and nsv/tsv (non-separated values) lists. CSV lists which have associated parsers may be processed with the tools of the package.\n"
-"\n"
-"date: 2013-05-16 14:49:13 +0000"
+#. summary(texlive-specs-s:texlive-r_und_s-doc)
+#, fuzzy
+msgid "Documentation for texlive-r_und_s"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-s:texlive-r_und_s-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-r_und_s"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-s:texlive-raleway)
+msgid "Use Raleway with TeX(-alike) systems"
msgstr ""
-#. description(texlive-notes)
+#. description(texlive-specs-s:texlive-raleway)
msgid ""
-"The package provides environments to highlight significant portions of text within a document, by putting the text in a box and adding an icon in the margin. (The icons are provided as 'fig' sources, processable by xfig.)\n"
+"The package provides the Raleway family in an easy to use way. For XeLaTeX and LuaLaTeX users the original OpenType fonts are used. The entire font family is included.\n"
"\n"
-"date: 2006-09-14 20:20:05 +0000"
+"date: 2014-05-07 16:59:41 +0000"
msgstr ""
-#. description(texlive-xhfill)
-msgid ""
-"The package provides extended macros for the default \\hrulefill command. It allows modification of the width and the colour of the line.\n"
-"\n"
-"date: 2011-05-17 15:47:58 +0000"
+#. summary(texlive-specs-s:texlive-raleway-doc)
+msgid "Documentation for texlive-raleway"
msgstr ""
-#. description(texlive-xargs)
-msgid ""
-"The package provides extended versions of \\newcommand and related LaTeX commands, which allow easy and robust definition of macros with many optional arguments, using a clear and simple xkeyval-style syntax.\n"
-"\n"
-"date: 2008-08-23 22:31:24 +0000"
+#. description(texlive-specs-s:texlive-raleway-doc)
+msgid "This package includes the documentation for texlive-raleway"
msgstr ""
-#. description(texlive-ltxkeys)
-msgid ""
-"The package provides facilities for creating and managing keys in the sense of the keyval and xkeyval packages, but it is intended to be more robust and faster. Its robustness comes from its ability to preserve braces in key values throughout parsing. The need to preserve braces in key values arises often in parsing keys (for example, in the xwatermark package). The package is faster than xkeyval package because (among other things) it avoids character-wise parsing of key values (called \"selective sanitization\" by the xkeyval package). The package also provides functions for defining and managing keys.\n"
-"\n"
-"date: 2012-11-22 11:57:51 +0000"
+#. summary(texlive-specs-s:texlive-raleway-fonts)
+msgid "Severed fonts for texlive-raleway"
msgstr ""
-#. description(texlive-pst-fit)
-msgid ""
-"The package provides fitting of: 1. Linear Functions; 2. Power Functions; 3. exp Function; 4. Log_{10} and Log_e functions; 5. Recip; 6. Kings Law data; 7. Gaussian; and 8. 4th order Polynomial.\n"
-"\n"
-"date: 2012-11-02 18:53:22 +0000"
+#. description(texlive-specs-s:texlive-raleway-fonts)
+msgid "The separated fonts package for texlive-raleway"
msgstr ""
-#. description(texlive-scalerel)
-msgid ""
-"The package provides four commands for vertically scaling and stretching objects. Its primary function is the ability to scale/stretch and shift one object to conform to the size of a specified second object. This feature can be useful in both equations and schematic diagrams. Additionally, the scaling and stretching commands offer constraints on maximum width and/or minimum aspect ratio, which are often used to preserve legibility or for the sake of general appearance.\n"
-"\n"
-"date: 2013-05-17 17:01:50 +0000"
+#. summary(texlive-specs-s:texlive-ran_toks)
+msgid "Randomise token strings"
msgstr ""
-#. description(texlive-pst-tools)
+#. description(texlive-specs-s:texlive-ran_toks)
msgid ""
-"The package provides helper functions for other PSTricks related packages.\n"
+"The package provides means of randomising lists of tokens, or lists of chunks of tokens. Two mechanisms for defining chunks are provided: the macro \\ranToks command accepts an argument containing tokens to be randomised; and the \\bRTVToks/\\eRTVToks commands delimit a collection of tokens for randomising; each group inside a rtVw constitutes one of these (typically larger) token sets.\n"
"\n"
-"date: 2012-10-16 20:55:53 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-monofill)
-msgid ""
-"The package provides horizontal alignment, as in the LaTeX command \\listfiles (or the author's longnamefilelist package). Uses may include in-text tables, or even code listings.\n"
-"\n"
-"date: 2012-10-31 15:32:17 +0000"
+#. summary(texlive-specs-s:texlive-ran_toks-doc)
+msgid "Documentation for texlive-ran_toks"
msgstr ""
-#. description(texlive-keyval2e)
-msgid ""
-"The package provides lightweight and robust facilities for creating and managing keys. Its machinery isn't as extensive as that of, e.g., the ltxkeys package, but it is equally robust; ease of use and speed of processing are the design aims of the package.\n"
-"\n"
-"date: 2011-08-26 09:26:23 +0000"
+#. description(texlive-specs-s:texlive-ran_toks-doc)
+msgid "This package includes the documentation for texlive-ran_toks"
msgstr ""
-#. description(texlive-ptext)
-msgid ""
-"The package provides lipsum-like facilities for the Persian language. The source of the filling text is the Persian epic \"the Shanameh\" (100 paragraphs are used.) The package needs to be run under XeLaTeX.\n"
-"\n"
-"date: 2013-04-29 13:26:25 +0000"
+#. summary(texlive-specs-t:texlive-randbild)
+msgid "Marginal pictures"
msgstr ""
-#. description(texlive-ydoc)
+#. description(texlive-specs-t:texlive-randbild)
msgid ""
-"The package provides macros and environments to document LaTeX packages and classes. It is an (as yet unfinished) alternative to the ltxdoc class and the doc or xdoc packages. The aim is to provide a different layout and more modern styles (using the xcolor, hyperref packages, etc.) This is an alpha release, and should probably not (yet) be used with other packages, since the implementation might change. Nevertheless, the author uses it to document his own packages.\n"
+"Provides environments randbild, to draw small marginal plots (using the package pstricks package pst-plot), and randbildbasis (the same, only without the automatically drawn coordinate system).\n"
"\n"
-"date: 2012-02-24 10:32:36 +0000"
+"date: 2012-06-03 14:14:40 +0000"
msgstr ""
-#. description(texlive-storecmd)
-msgid ""
-"The package provides macros for command definition that save the name of the command being defined in a file or a macro container. The list could be useful for spelling exceptions in text editors that do not support TeX syntax.\n"
-"\n"
-"date: 2011-10-27 08:28:55 +0000"
+#. summary(texlive-specs-t:texlive-randbild-doc)
+#, fuzzy
+msgid "Documentation for texlive-randbild"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-randbild-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-randbild"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-randomwalk)
+msgid "Random walks using TikZ"
msgstr ""
-#. description(texlive-xstring)
+#. description(texlive-specs-t:texlive-randomwalk)
msgid ""
-"The package provides macros for manipulating strings -- testing a string's contents, extracting substrings, substitution of substrings and providing numbers such as string length, position of, or number of recurrences of, a substring. The package works equally in Plain TeX and LaTeX (though e-TeX is always required). The strings to be processed may contain (expandable) macros.\n"
+"The randomwalk package provides a user command, \\RandomWalk, to draw random walks with a given number of steps. Lengths and angles of the steps can be customized in various ways. The package uses lcg for its 'random' numbers and PGF/TikZ for its graphical output.\n"
"\n"
-"date: 2013-02-28 12:49:00 +0000"
+"date: 2014-01-04 13:18:29 +0000"
msgstr ""
-#. description(texlive-variations)
-msgid ""
-"The package provides macros for typesetting tables showing variations of functions according to French usage. These macros may be used by both LaTeX and plain TeX users.\n"
-"\n"
-"date: 2007-03-13 08:06:46 +0000"
+#. summary(texlive-specs-t:texlive-randomwalk-doc)
+#, fuzzy
+msgid "Documentation for texlive-randomwalk"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-randomwalk-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-randomwalk"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-randtext)
+msgid "Randomise the order of characters in strings"
msgstr ""
-#. description(texlive-skb)
+#. description(texlive-specs-t:texlive-randtext)
msgid ""
-"The package provides macros that help to build a document repository for long living documents. It focuses on structure and re-use of text, code, figures etc. The basic concept is first to separate structure from content (i.e., text about a topic from the structure it is presented by) and then separating the content from the actual published document, thus enabling easy re-use of text blocks in different publications (i.e., text about a protocol in a short article about this protocol as well as in a book about many protocols); all without constantly copying or changing text. As a side effect, using the document classes provided, it hides a lot of LaTeX from someone who just wants to write articles and books.\n"
+"The package provides a single macro \\randomize{TEXT} that typesets the characters of TEXT in random order, such that the resulting output appears correct, but most automated attempts to read the file will misunderstand it. This function allows one to include an email address in a TeX document and publish it online without fear of email address harvesters or spammers easily picking up the address.\n"
"\n"
-"date: 2011-05-13 00:11:01 +0000"
+"date: 2012-06-03 18:03:18 +0000"
msgstr ""
-#. description(texlive-pst-electricfield)
-msgid ""
-"The package provides macros to plot electric field and equipotential lines using PStricks. There may be any number of charges which can be placed in a cartesian coordinate system by (x,y) values.\n"
-"\n"
-"date: 2012-06-16 23:47:14 +0000"
+#. summary(texlive-specs-t:texlive-randtext-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-randtext"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-randtext-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-randtext"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rccol)
+msgid "Decimal-centered optionally rounded numbers in tabular"
msgstr ""
-#. description(texlive-sdrt)
+#. description(texlive-specs-t:texlive-rccol)
msgid ""
-"The package provides macros to produce the 'Box notation' of SDRT (and DRT), to draw trees representing discourse relations, and finally to have an easy access to various mathematical symbols used in that theory, mostly with automatic mathematics mode, so they work the same in formulae and in text.\n"
+"The rccol package provides decimal-centered numbers: corresponding digits and decimal separators aligned. Furthermore, rounding to the desired precision is possible. The package makes use of the fltpoint package (as well as the LaTeX required array package).\n"
"\n"
-"date: 2009-07-05 15:22:22 +0000"
+"date: 2012-06-03 16:15:41 +0000"
msgstr ""
-#. description(texlive-rec-thy)
-msgid ""
-"The package provides many macros to express standard notation in recursion theory (otherwise known as computability theory).\n"
-"\n"
-"date: 2012-06-21 08:44:34 +0000"
+#. summary(texlive-specs-t:texlive-rccol-doc)
+#, fuzzy
+msgid "Documentation for texlive-rccol"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rccol-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rccol"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rcs)
+msgid "Use RCS (revision control system) tags in LaTeX documents"
msgstr ""
-#. description(texlive-xetex-itrans)
+#. description(texlive-specs-t:texlive-rcs)
msgid ""
-"The package provides maps for use with XeLaTeX with coding done using itrans. Fontspec maps are provided for Devanagari (Sanskrit), for Sanskrit in Kannada and for Kannada itself.\n"
+"The rcs package utilizes the inclusion of RCS supplied data in LaTeX documents. It's upward compatible to *all* rcs styles I know of. In particular, you can easily access values of every RCS field in your document put the checkin date on the titlepage put RCS fields in a footline You can typeset revision logs. Not in verbatim -- real LaTeX text! But you need a configurable RCS for that. Refer to the user manual for more detailed information. You can also configure the rcs package easily to do special things for any keyword. This bundle comes with a user manual, an internal interface description, full documentation of the implementation, style information for AUC- TeX, and test cases.\n"
"\n"
-"date: 2011-09-26 13:47:09 +0000"
+"date: 2013-12-13 20:21:54 +0000"
msgstr ""
-#. description(texlive-mathalfa)
-msgid ""
-"The package provides means of loading maths alphabets (such as are normally addressed via macros \\mathcal, \\mathbb, \\mathfrak and \\mathscr), offering various features normally missing in existing packages for this job.\n"
-"\n"
-"date: 2012-07-15 23:16:42 +0000"
+#. summary(texlive-specs-t:texlive-rcs-doc)
+#, fuzzy
+msgid "Documentation for texlive-rcs"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rcs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rcs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rcs-multi)
+msgid "Typeset RCS version control in multiple-file documents"
msgstr ""
-#. description(texlive-pst-plot)
+#. description(texlive-specs-t:texlive-rcs-multi)
msgid ""
-"The package provides plotting of data (typically from external files), using PSTricks. Plots my be configured using a wide variety of parameters.\n"
+"The package enables the user to typeset version control information provided by RCS keywords (e.g., $ID: ... $) in LaTeX documents that contain multiple TeX files. The package is based on the author's svn-multi package.\n"
"\n"
-"date: 2013-01-04 13:21:22 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-simplecd)
-msgid ""
-"The package provides printable cut-outs for various CD, DVD and other disc holders. The name of the package comes from its implementation and ease of use; it was designed just for text content, but since the text is placed in a \\parbox in a tabular environment cell, a rather wide range of things may be placed.\n"
-"\n"
-"date: 2013-02-28 19:37:57 +0000"
+#. summary(texlive-specs-t:texlive-rcs-multi-doc)
+#, fuzzy
+msgid "Documentation for texlive-rcs-multi"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-rcs-multi-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rcs-multi"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rcsinfo)
+msgid "Support for the revision control system"
msgstr ""
-#. description(texlive-psu-thesis)
+#. description(texlive-specs-t:texlive-rcsinfo)
msgid ""
-"The package provides proper page formatting according to the Penn State thesis office guidelines (as of 2004) and automatically formats the front and back matter, title page, and more. A BibTeX style file is also included for the bibliography.\n"
+"A package to extract RCS (Revision Control System) information and use it in a LaTeX document. For users of LaTeX2HTML rcsinfo.perl is included.\n"
"\n"
-"date: 2008-09-20 11:36:26 +0000"
+"date: 2011-11-11 11:03:47 +0000"
msgstr ""
-#. description(texlive-lewis)
-msgid ""
-"The package provides rudimentary support for drawing Lewis Structures. Support is limited to elements that support the octet rule.\n"
-"\n"
-"date: 2007-03-08 20:58:53 +0000"
+#. summary(texlive-specs-t:texlive-rcsinfo-doc)
+#, fuzzy
+msgid "Documentation for texlive-rcsinfo"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rcsinfo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rcsinfo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-readarray)
+msgid "Read, store and recall array-formatted data"
msgstr ""
-#. description(texlive-mafr)
+#. description(texlive-specs-t:texlive-readarray)
msgid ""
-"The package provides settings and macros for typesetting mathematics with LaTeX in compliance with French usage. It comes with two document classes, 'fiche' and 'cours', useful to create short high school documents such as tests or lessons. The documentation is in French.\n"
+"The package allows the user to input formatted data into elements of a 2-D or 3-D array and to recall that data at will by individual cell number. The data can be but need not be numerical in nature. It can be, for example, formatted text. While the package can be used for any application where indexed data is called for, the package proves particularly useful when elements of multiple arrays must be recallable and dynamically combined at time of compilation, rather than in advance.\n"
"\n"
-"date: 2007-03-09 21:25:45 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-noconflict)
-msgid ""
-"The package provides several commands to prefix (and hence obscure) a macro's (or a sequence of macros') name, and to restore the original macro(s) at places in a document where they are needed.\n"
-"\n"
-"date: 2013-04-26 22:34:43 +0000"
+#. summary(texlive-specs-t:texlive-readarray-doc)
+msgid "Documentation for texlive-readarray"
msgstr ""
-#. description(texlive-ytableau)
-msgid ""
-"The package provides several functions for drawing Young tableaux and Young diagrams, extending the young and youngtab packages but providing lots more features. Skew and coloured tableaux are easy, and pgfkeys-enabled options are provided both at package load and configurably.\n"
-"\n"
-"date: 2012-08-16 10:45:33 +0000"
+#. description(texlive-specs-t:texlive-readarray-doc)
+msgid "This package includes the documentation for texlive-readarray"
msgstr ""
-#. description(texlive-pst-dbicons)
-msgid ""
-"The package provides some useful macros in the database area. The package focusses on typesetting ER-Diagrams in a declarative style, i.e., by positioning some nodes and defining the position of all other nodes relative to them by using the standard database terminology. The PSTricks package is required for using pst-dbicons, but no deep knowledge of PSTricks commands is required (although such knowledge is useful for exploiting the full functionality of the package).\n"
-"\n"
-"date: 2006-08-27 15:41:02 +0000"
+#. summary(texlive-specs-t:texlive-realboxes)
+msgid "Variants of common box-commands that read their content as real box and not as macro argument"
msgstr ""
-#. description(texlive-tikzpagenodes)
+#. description(texlive-specs-t:texlive-realboxes)
msgid ""
-"The package provides special PGF/TikZ nodes for the text, marginpar, footer and header area of the current page. They are inspired by the 'current page' node defined by PGF/TikZ itself.\n"
+"The package uses the author's package collectbox to define variants of common box related macros which read the content as real box and not as macro argument. This enables the use of verbatim or other special material as part of this content. The provided macros have the same names as the original versions but start with an upper-case letter instead. The \"long-form\" macros, like \\Makebox, can also be used as environments, but not the \"short-form\" macros, like \\Mbox. However, normally the long form uses the short form anyway when no optional arguments are used.\n"
"\n"
-"date: 2012-09-16 12:57:16 +0000"
+"date: 2012-06-09 19:22:57 +0000"
msgstr ""
-#. description(texlive-tikz-3dplot)
-msgid ""
-"The package provides straightforward ways to define three- dimensional coordinate frames through which to plot in TikZ. The user can specify the orientation of the main coordinate frame, and use standard TikZ commands and coordinates to render their tikzfigure. A secondary coordinate frame is provided to allow rotations and translations with respect to the main coordinate frame. In addition, the package can also handle plotting user-specified functions in spherical polar coordinates, where both the radius and fill color can be expressed as parametric functions of polar angles.\n"
-"\n"
-"date: 2012-01-11 23:06:34 +0000"
+#. summary(texlive-specs-t:texlive-realboxes-doc)
+#, fuzzy
+msgid "Documentation for texlive-realboxes"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-realboxes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-realboxes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-realscripts)
+msgid "Access OpenType subscript and superscript glyphs"
msgstr ""
-#. description(texlive-tkz-orm)
+#. description(texlive-specs-t:texlive-realscripts)
msgid ""
-"The package provides styles for drawing Object-Role Model (ORM) diagrams in TeX based on the pgf and TikZ picture environment.\n"
+"This small package replaces \\textsuperscript and \\textsubscript commands by equivalent commands that use OpenType font features to access appropriate glyphs if possible. The package also patches LaTeX's default footnote command to use this new \\textsuperscript for footnote symbols. The package requires fontspec running on either XeLaTeX or LuaLaTeX. The package holds functions that were once parts of the xltxtra package, which now loads realscripts by default.\n"
"\n"
-"date: 2010-01-28 12:16:16 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-turkmen)
-msgid ""
-"The package provides support for Turkmen in babel, but integration with babel is not available.\n"
-"\n"
-"date: 2010-04-06 11:44:40 +0000"
+#. summary(texlive-specs-t:texlive-realscripts-doc)
+#, fuzzy
+msgid "Documentation for texlive-realscripts"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-realscripts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-realscripts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rec-thy)
+msgid "Commands to typeset recursion theory papers"
msgstr ""
-#. description(texlive-matc3)
+#. description(texlive-specs-t:texlive-rec-thy)
msgid ""
-"The package provides support for the Matematica C3 project to produce free mathematical text books for use in Italian high schools.\n"
+"The package provides many macros to express standard notation in recursion theory (otherwise known as computability theory).\n"
"\n"
-"date: 2013-04-09 13:55:17 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-subfig)
-msgid ""
-"The package provides support for the manipulation and reference of small or 'sub' figures and tables within a single figure or table environment. It is convenient to use this package when your subfigures are to be separately captioned, referenced, or are to be included in the List-of-Figures. A new \\subfigure command is introduced which can be used inside a figure environment for each subfigure. An optional first argument is used as the caption for that subfigure. This package supersedes the subfigure package (which will continue to be supported, but no longer maintained). The name has changed because the subfig package is not completely backward compatible with the older subfigure package due to an extensive rewrite to use the new caption package to produce its subcaptions. The major advantage to the new package is that the user interface is keyword/value driven and easier to use. To ease the transition from the subfigure package it includes a configuration file (subfig.cfg) whic
h nearly emulates the subfigure package.\n"
-"\n"
-"date: 2010-05-09 22:41:23 +0000"
+#. summary(texlive-specs-t:texlive-rec-thy-doc)
+#, fuzzy
+msgid "Documentation for texlive-rec-thy"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rec-thy-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rec-thy"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-recipe)
+msgid "A LaTeX class to typeset recipes"
msgstr ""
-#. description(texlive-knitting)
+#. description(texlive-specs-t:texlive-recipe)
msgid ""
-"The package provides symbol fonts and commands to write charted instructions for cable and lace knitting patterns, using either plain TeX or LaTeX. The fonts are available both as MetaFont source and in Adobe Type 1 format.\n"
+"The layout design is relative straightforward (and traditional: see 'sample output' under 'documentation'); the class needs uses the Bookman and BrushScript-Italic fonts.\n"
"\n"
-"date: 2010-08-29 20:20:17 +0000"
+"date: 2012-06-09 19:22:57 +0000"
msgstr ""
-#. description(texlive-nostarch)
-msgid ""
-"The package provides the \"official\" LaTeX style for No Starch Press. Provided are a a class, a package for interfacing to hyperref and an index style file. The style serves both for printed and for electronic books.\n"
-"\n"
-"date: 2008-08-22 15:15:44 +0000"
+#. summary(texlive-specs-t:texlive-recipe-doc)
+#, fuzzy
+msgid "Documentation for texlive-recipe"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-recipe-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-recipe"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-recipecard)
+msgid "Typeset recipes in note-card-sized boxes"
msgstr ""
-#. description(texlive-libertine)
+#. description(texlive-specs-t:texlive-recipecard)
msgid ""
-"The package provides the Libertine and Biolinum fonts in both Type 1 and OTF styles, together with support macros for their use. Monospaced and display fonts, and the \"keyboard\" set are also included, in OTF style, only. The package supersedes both the libertineotf and the libertine-legacy packages.\n"
+"The recipecard class typesets recipes into note card sized boxes that can then be cut out and pasted on to note cards. The recipe then looks elegant and fits in the box of recipes.\n"
"\n"
-"date: 2013-02-13 17:18:56 +0000"
+"date: 2011-11-07 07:36:45 +0000"
msgstr ""
-#. description(texlive-raleway)
-msgid ""
-"The package provides the Raleway family in an easy to use way. For XeLaTeX and LuaLaTeX users the original OpenType fonts are used. The entire font family is included.\n"
-"\n"
-"date: 2013-05-02 18:57:12 +0000"
+#. summary(texlive-specs-t:texlive-recipecard-doc)
+#, fuzzy
+msgid "Documentation for texlive-recipecard"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-recipecard-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-recipecard"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rectopma)
+msgid "Recycle top matter"
msgstr ""
-#. description(texlive-multido)
+#. description(texlive-specs-t:texlive-rectopma)
msgid ""
-"The package provides the \\multido command, which was originally designed for use with with PSTricks. Fixed-point arithmetic is used when working on the loop variable, so that the package is equally applicable in graphics applications like PSTricks as it is with the more common integer loops.\n"
+"Saves the arguments of \\author and \\title for reference (after \\maketitle) in a document. (\\maketitle simply disposes of the information, in the standard classes and some others.)\n"
"\n"
-"date: 2010-05-15 09:36:20 +0000"
+"date: 2012-06-09 19:22:57 +0000"
msgstr ""
-#. description(texlive-parnotes)
-msgid ""
-"The package provides the \\parnote command. The notes are set as (normal) running paragraphs; placement is at the end of each paragraph, or manually, using the \\parnotes command.\n"
-"\n"
-"date: 2012-01-04 23:06:09 +0000"
+#. summary(texlive-specs-t:texlive-rectopma-doc)
+#, fuzzy
+msgid "Documentation for texlive-rectopma"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rectopma-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rectopma"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-recycle)
+msgid "A font providing the \"recyclable\" logo"
msgstr ""
-#. description(texlive-pdfmarginpar)
+#. description(texlive-specs-t:texlive-recycle)
msgid ""
-"The package provides the \\pdfmarginpar command which is similar in spirit to \\marginpar. However, it creates PDF annotations which may be viewed with Adobe Reader in place of marginal texts. Small icons indicate the in-text position where the message originates, popups provide the messages themselves. Thus bugfixes and other such communications are clearly visible together when viewing the document, while the document itself is not obscured.\n"
+"This single-character font is provided as Metafont source, and in Adobe Type 1 format. It is accompanied by a trivial LaTeX package to use the logo at various sizes.\n"
"\n"
-"date: 2011-08-10 09:12:20 +0000"
+"date: 2014-05-07 21:10:33 +0000"
msgstr ""
-#. description(texlive-tablefootnote)
-msgid ""
-"The package provides the command \\tablefootnote to be used in a table or sidewaystableenvironment, where \\footnote will not work (and when using \\footnotemark and \\footnotetext, and adjusting the counter as necessary, is too much work.\n"
-"\n"
-"date: 2012-07-30 09:22:32 +0000"
+#. summary(texlive-specs-t:texlive-recycle-doc)
+#, fuzzy
+msgid "Documentation for texlive-recycle"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-recycle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-recycle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-recycle-fonts)
+msgid "Severed fonts for texlive-recycle"
msgstr ""
-#. description(texlive-tableof)
-msgid ""
-"The package provides the commands to flag chapters or sections (or anything else destined to become a TOC line). The command \\nexttocwithtags{req1,req2,...}{excl1,excl2,...} specifies which tags are to be required and which ones are to be excluded by the next \\tableofcontents (or equivalent) command. In a document that uses a class where \\tableofcontents may only be used once, the command \\tableoftaggedcontents{req1,req2,...}{excl1,excl2,...} may be used to provide several tables.\n"
-"\n"
-"date: 2013-03-05 13:09:10 +0000"
+#. description(texlive-specs-t:texlive-recycle-fonts)
+msgid "The separated fonts package for texlive-recycle"
msgstr ""
-#. description(texlive-pagecont)
-msgid ""
-"The package provides the facility that several documents can be typeset independently with page numbers in sequence, as if they were a single document.\n"
-"\n"
-"date: 2009-11-10 08:17:41 +0000"
+#. summary(texlive-specs-t:texlive-refcheck)
+msgid "Check references (in figures, table, equations, etc)"
msgstr ""
-#. description(texlive-moreenum)
+#. description(texlive-specs-t:texlive-refcheck)
msgid ""
-"The package provides the following new enumerate styles: - \\greek for lowercase Greek letters; - \\Greek for uppercase Greek letters; - \\enumHex for uppercase hexadecimal enumeration; - \\enumhex for lowercase hexadecimal enumeration;\n"
-"- \\enumbinary for binary enumeration; - \\enumoctal for octal enumeration; - \\levelnth for \"1st\", \"2nd\", \"3rd\" etc., with the \"nth\"s on the baseline; - raisenth for \"1st\", \"2nd\", \"3rd\" etc., with the \"nth\"s raised; - \\nthwords for \"first\", \"second\", \"third\" etc.; - \\Nthwords for \"First\", \"Second\", \"Third\" etc.; - \\NTHWORDS for \"FIRST\", \"SECOND\", \"THIRD\" etc.;\n"
-"- \\nwords for \"one\", \"two\", \"three\" etc.; - \\Nwords for \"One\", \"Two\", \"Three\" etc.; and - \\NWORDS for \"ONE\", \"TWO\", \"THREE\" etc. Each of these works with enumitem's \"starred variant\" feature. So \\begin{enumerate}[label=\\enumhex*] will output a hex enumerated list. Enumitem provides a start=0 option for starting your enumerations at 0. The package requires amsmath, alphalph, enumitem (of course), binhex and nth, all of which are widely available.\n"
+"The package checks references in a document, looking for numbered but unlabelled equations, for labels which are not used in the text, for unused bibliography references. It can also display label names in text near corresponding numbers of equations and/or bibliography references.\n"
"\n"
-"date: 2011-11-03 11:59:01 +0000"
+"date: 2013-02-27 11:58:34 +0000"
msgstr ""
-#. description(texlive-threeparttablex)
-msgid ""
-"The package provides the functionality of the threeparttable package to tables created using the longtable package.\n"
-"\n"
-"date: 2013-04-21 10:55:17 +0000"
+#. summary(texlive-specs-t:texlive-refcheck-doc)
+#, fuzzy
+msgid "Documentation for texlive-refcheck"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-refcheck-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-refcheck"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-refenums)
+msgid "Define reference labels items with names of their own"
msgstr ""
-#. description(texlive-xnewcommand)
+#. description(texlive-specs-t:texlive-refenums)
msgid ""
-"The package provides the means of defining \\global and (e-TeX) \\protected commands, within the framework of LaTeX's standard \\newcommand.\n"
+"The package provides commands to define enumerable items with a number and a long name, which can be referenced referenced later with the name or just the short form. For instance, \"Milestone M1: Specification created\" can be defined and later on be referenced with 'M1' or 'M1 (\"Specification created\")'. The text in the references is derived from the definition and also rendered as hyperlink to the definition.\n"
"\n"
-"date: 2008-08-24 12:46:50 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-typeface)
-msgid ""
-"The package provides the means of establishing a consistent set of fonts for use in a LaTeX document. It allows mixing and matching the Type 1 font sets available on the archive (and it may be extended, via its configuration file, to support other fonts). Font-set definition takes the form of a set of options that are read when the package is loaded: for each typographic category (main body font, sans-serif font, monospace font, mathematics fonts, text figures, and so on), a font or a transformation is given in those options. The approach enables the user to remember their own configurations (as a single command) and to borrow configurations that other users have developed. The present release is designated \"for review\".\n"
-"\n"
-"date: 2012-07-02 19:55:35 +0000"
+#. summary(texlive-specs-t:texlive-refenums-doc)
+#, fuzzy
+msgid "Documentation for texlive-refenums"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-refenums-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-refenums"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-reflectgraphics)
+msgid "Techniques for reflecting graphics"
msgstr ""
-#. description(texlive-substances)
+#. description(texlive-specs-t:texlive-reflectgraphics)
msgid ""
-"The package provides the means to create a database-like file that contains data of various chemicals. These data may be retrieved in the document; an index of the chemicals mentioned in the document can be created..\n"
+"The package provides a macro for reflecting images, in a number of different ways, in pursuit of \"more striking\" graphics in a document.\n"
"\n"
-"date: 2012-07-22 20:37:06 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-makeglos)
-msgid ""
-"The package provides the means to include a glossary into a document. The glossary is prepared by an external program, such as xindy or makeindex, in the same way that an index is made.\n"
-"\n"
-"date: 2007-02-22 23:16:39 +0000"
+#. summary(texlive-specs-t:texlive-reflectgraphics-doc)
+#, fuzzy
+msgid "Documentation for texlive-reflectgraphics"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-t:texlive-reflectgraphics-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-reflectgraphics"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-refman)
+msgid "Format technical reference manuals"
msgstr ""
-#. description(texlive-lapdf)
+#. description(texlive-specs-t:texlive-refman)
msgid ""
-"The package provides the means to use PDF drawing primitives to produce high quality, colored graphics. It - uses Bezier curves (integral and rational) from degree one to seven, - allows TeX typesetting in the graphic, - offers most of the standard math functions, - allows plotting normal, parametric and polar functions. The package has linear, logx, logy, logxy and polar grids with many specs; - it can rotate, clip and do many nice things easily - it has two looping commands for programming and many instructive example files. The package requires pdfTeX but otherwise only depends on the calc package.\n"
+"Document classes (report- and article-style) for writing technical reference manuals. It offers a wide left margin for notes to the reader, like some of the manuals distributed by Adobe.\n"
"\n"
-"date: 2011-09-03 23:09:50 +0000"
+"date: 2012-02-25 10:15:03 +0000"
msgstr ""
-#. description(texlive-ifetex)
-msgid ""
-"The package provides the switch \\ifetex which indicates whether e-TeX is available or not. The package can be loaded as LaTeX package using \\usepackage{ifetex} or in plain TeX using \\input ifetex. In either case it aborts silently if the \\ifetex macro is already defined. The package's test is whether \\eTeXversion is defined as a primitive; if it is, the package assumes e-TeX features are available.\n"
-"\n"
-"date: 2011-12-15 15:49:50 +0000"
+#. summary(texlive-specs-t:texlive-refman-doc)
+#, fuzzy
+msgid "Documentation for texlive-refman"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-refman-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-refman"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-refstyle)
+msgid "Advanced formatting of cross references"
msgstr ""
-#. description(texlive-isomath)
+#. description(texlive-specs-t:texlive-refstyle)
msgid ""
-"The package provides tools for a mathematical style that conforms to the International Standard ISO 80000-2 and is common in science and technology. It changes the default shape of capital Greek letters to italic, sets up bold italic and sans-serif bold italic math alphabets with Latin and Greek characters, and defines macros for markup of vector, matrix and tensor symbols.\n"
+"The package provides a consistent way of producing references throughout a project. Enough flexibility is provided to make local changes to a single reference. The user can configure their own setup. The package offers a direct interface to varioref (for use, for example, in large projects such as a series of books, or a multivolume thesis written as a series of documents), and name references from the nameref package may be incorporated with ease. For large projects such as a series of books or a multi volume thesis, written as freestanding documents, a facility is provided to interface to the xr package for external document references.\n"
"\n"
-"date: 2012-09-12 16:41:18 +0000"
+"date: 2012-11-14 10:47:31 +0000"
msgstr ""
-#. description(texlive-skeycommand)
-msgid ""
-"The package provides tools for defining LaTeX commands and environments using combinations of parameters and keys. All the facilities of the ltxkeys and skeyval packages are available to the user of skeycommand.\n"
-"\n"
-"date: 2011-11-20 10:43:03 +0000"
+#. summary(texlive-specs-t:texlive-refstyle-doc)
+#, fuzzy
+msgid "Documentation for texlive-refstyle"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-refstyle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-refstyle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-regcount)
+msgid "Display the allocation status of the TeX registers"
msgstr ""
-#. description(texlive-incgraph)
+#. description(texlive-specs-t:texlive-regcount)
msgid ""
-"The package provides tools for including graphics at the full size of the output medium, or for creating \"pages\" whose size is that of the graphic they contain. A principal use case is documents that require inclusion of (potentially many) scans or photographs. Bookmarking is especially supported. The tool box has basic macros and a 'convenience' user interface that wraps \\includegraphics\n"
+"Adds a macro \\rgcounts which displays the allocation status of the TeX registers. The display is written into the .log file as it is a bit verbose. An automatic call to \\rgcounts is done at \\begin{document} and \\end{document}.\n"
"\n"
-"date: 2013-01-17 10:27:48 +0000"
+"date: 2013-10-03 12:20:59 +0000"
msgstr ""
-#. description(texlive-xpeek)
-msgid ""
-"The package provides tools to help define commands that, like \\xspace (from xspace) and the LaTeX command \\textit, peek at what follows them in the command stream and choose appropriate behaviour.\n"
-"\n"
-"date: 2012-08-17 10:03:38 +0000"
+#. summary(texlive-specs-t:texlive-regcount-doc)
+#, fuzzy
+msgid "Documentation for texlive-regcount"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-regcount-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-regcount"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-regexpatch)
+msgid "High level patching of commands"
msgstr ""
-#. description(texlive-swimgraf)
+#. description(texlive-specs-t:texlive-regexpatch)
msgid ""
-"The package provides two macros that produce representations of a swimmer's performances. The user records data in a text file and specifies as arguments of the macros the date range of interest. The macros extract the relevant information from the file and process it: \\swimgraph produces a graph of the times in a single swimming event (specified as an argument), plotting long course and short course times in separate lines. Records and qualifying times, stored in text files, may optionally be included on the graph. \\swimtext produces a written record of the times in all events. Files of current world and Canadian records are included. The package requires the PSTricks and keyval packages. For attractive output it also requires a colour output device.\n"
+"The package generalises the macro patching commands provided by P. Lehmann's etoolbox. The difference between this package and its sibling xpatch is that this package sports a very powerful \\regexpatchcmd based on the l3regex module of the LaTeX3 experimental packages.\n"
"\n"
-"date: 2012-02-20 11:29:23 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-multiexpand)
-msgid ""
-"The package provides two user commands; one that performs multiple expansions, and one that does multiple \\expandafter operations, in a single macro call. The package requires eTeX's \\numexpr command. The author suggests that the same effect could be provided by use of the command variant mechanisms of LaTeX 3 (see, for example, the interface documentation of the experimental LaTeX 3 kernel).\n"
-"\n"
-"date: 2013-01-08 15:25:57 +0000"
+#. summary(texlive-specs-t:texlive-regexpatch-doc)
+#, fuzzy
+msgid "Documentation for texlive-regexpatch"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-regexpatch-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-regexpatch"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-register)
+msgid "Typeset programmable elements in digital hardware (registers)"
msgstr ""
-#. description(texlive-impnattypo)
+#. description(texlive-specs-t:texlive-register)
msgid ""
-"The package provides useful macros implementing recommendations by the French Imprimerie Nationale.\n"
+"This package is designed for typesetting the programmable elements in digital hardware, i.e., registers. Such registers typically have many fields and can be quite wide; they are thus a challenge to typeset in a consistent manner. Register is similar in some aspects to the bytefield package. Anyone doing hardware documentation using LaTeX should examine both packages. Register requires a fairly recent version of the float package. A Perl module and a Perl script are provided, to translate the register specifications into programmable data structures.\n"
"\n"
-"date: 2011-09-21 15:45:17 +0000"
+"date: 2012-06-08 05:46:14 +0000"
msgstr ""
-#. description(texlive-tikzsymbols)
+#. summary(texlive-specs-t:texlive-register-doc)
+#, fuzzy
+msgid "Documentation for texlive-register"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-register-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-register"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-regstats)
+#, fuzzy
+msgid "Information about register use"
+msgstr "Nejsou dostupné žádné informace."
+
+#. description(texlive-specs-t:texlive-regstats)
msgid ""
-"The package provides various emoticons, cooking symbols and trees.\n"
+"The package will report number of used registers (counter, dimen, skip, muskip, box, token, input, output, math families, languages, insertions), and will compare the number to the maximum available number of such registers.\n"
"\n"
-"date: 2013-04-18 11:35:59 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-spanglish)
-msgid ""
-"The package provides very simplified (or ultra sloppy) support for Spanish in Babel, mostly as a fallback in case spanish.ldf fails for some reason. The package provides basic support for Spanish hyphenation, captions, date, frenchspacing, indentfirst, symbolic footnotes, enumerations, small caps roman numerals, and a handful of shorthands and Spanish mathematical operators. No options or attributes for customization are provided.\n"
-"\n"
-"date: 2013-03-02 06:48:35 +0000"
+#. summary(texlive-specs-t:texlive-regstats-doc)
+#, fuzzy
+msgid "Documentation for texlive-regstats"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-regstats-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-regstats"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-relenc)
+msgid "A \"relaxed\" font encoding"
msgstr ""
-#. description(texlive-rsfso)
+#. description(texlive-specs-t:texlive-relenc)
msgid ""
-"The package provides virtual fonts and LaTeX support files for mathematical calligraphic fonts based on the rsfs Adobe Type 1 fonts (which must also be present for successful installation, with the slant substantially reduced. The output is quite similar to that from the Adobe Mathematical Pi script font.\n"
+"LaTeX package providing a relaxed font encoding to make available to a font designer more slots for insertion of ligatures and accented characters.\n"
"\n"
-"date: 2011-02-18 15:44:14 +0000"
+"date: 2012-06-08 05:46:14 +0000"
msgstr ""
-#. description(texlive-pxtxalfa)
-msgid ""
-"The package provides virtual math alphabets based on pxfonts and txfonts, with LaTeX support files and adjusted metrics. The mathalfa package offers support for this collection.\n"
-"\n"
-"date: 2011-08-23 12:32:14 +0000"
+#. summary(texlive-specs-t:texlive-relenc-doc)
+#, fuzzy
+msgid "Documentation for texlive-relenc"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-relenc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-relenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-relsize)
+msgid "Set the font size relative to the current font size"
msgstr ""
-#. description(texlive-paracol)
+#. description(texlive-specs-t:texlive-relsize)
msgid ""
-"The package provides yet another multi-column typesetting mechanism by which you produce multi-column (e.g., bilingual) document switching and sychronizing each corresponding part in \"parallel\".\n"
+"The basic command of the package is \\relsize, whose argument is a number of \\magsteps to change size; from this are defined commands \\larger, \\smaller, \\textlarger, etc.\n"
"\n"
-"date: 2013-05-28 09:00:31 +0000"
+"date: 2013-05-27 18:07:27 +0000"
msgstr ""
-#. description(texlive-pst-optexp)
-msgid ""
-"The package pst-optexp is a collection of optical components that facilitate easy sketching of optical experimental setups. A lot of different free-ray and fiber components are provided, the alignment, positioning and labelling of which can be achieved in very simple and flexible ways. The components can be connected with fibers or beams, realistic raytraced beam paths are also possible.\n"
-"\n"
-"date: 2013-05-21 19:04:45 +0000"
+#. summary(texlive-specs-t:texlive-relsize-doc)
+#, fuzzy
+msgid "Documentation for texlive-relsize"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-relsize-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-relsize"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-reotex)
+msgid "Draw Reo Channels and Circuits"
msgstr ""
-#. description(texlive-pst-pdf)
+#. description(texlive-specs-t:texlive-reotex)
msgid ""
-"The package pst-pdf simplifies the use of graphics from PSTricks and other PostScript code in PDF documents. As in building a bibliography with BibTEX, additional external programmes are invoked. In this case they are used to create a PDF file (\\PDFcontainer) that will contain all the graphics material. In the final document these contents will be inserted instead of the original PostScript code. The package works with pstricks and requires a recent version of the preview package.\n"
+"The package defines macros and other utilities to design Reo Circuits. The package require PGF/TikZ support.\n"
"\n"
-"date: 2012-06-18 11:20:48 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-thumbs)
-msgid ""
-"The package puts running, customizable thumb marks in the outer margin, moving downward as the chapter number (or whatever shall be marked by the thumb marks) increases. Additionally an overview page/table of thumb marks can be added automatically, which gives the names of the thumbed objects, the page where the object/thumb mark first appears, and the thumb mark itself at its correct position. The thumb marks are useful for large documents (such as reference guides, anthologies, etc.), where a quick and easy way to find (for example) a chapter is needed.\n"
-"\n"
-"date: 2012-02-24 12:31:20 +0000"
+#. summary(texlive-specs-t:texlive-reotex-doc)
+#, fuzzy
+msgid "Documentation for texlive-reotex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-reotex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-reotex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-repeatindex)
+msgid "Repeat items in an index after a page or column break"
msgstr ""
-#. description(texlive-totcount)
+#. description(texlive-specs-t:texlive-repeatindex)
msgid ""
-"The package records the value that was last set, for any counter of interest; since most such counters are simply incremented when they are changed, the recorded value will usually be the maximum value.\n"
+"This Package repeats item of an index if a page or column break occurs within a list of subitems. This helps to find out to which main item a subitem belongs.\n"
"\n"
-"date: 2011-01-25 20:21:41 +0000"
+"date: 2012-06-03 16:15:41 +0000"
msgstr ""
-#. description(texlive-thinsp)
+#. summary(texlive-specs-t:texlive-repeatindex-doc)
+#, fuzzy
+msgid "Documentation for texlive-repeatindex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-repeatindex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-repeatindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-repere)
+#, fuzzy
+msgid "Diagrams for school mathematics"
+msgstr "C++ pro symbolické kalkulátory"
+
+#. description(texlive-specs-t:texlive-repere)
msgid ""
-"The package redefines \\thinspace to have a stretch component.\n"
+"The package simplifies drawing figures in a coordinate system; the specific target is support of secondary school mathematics.\n"
"\n"
-"date: 2008-08-24 12:46:50 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-margbib)
-msgid ""
-"The package redefines the 'thebibliography' environment to place the citation key into the margin.\n"
-"\n"
-"date: 2008-09-23 11:30:27 +0000"
+#. summary(texlive-specs-t:texlive-repere-doc)
+#, fuzzy
+msgid "Documentation for texlive-repere"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-repere-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-repere"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-repltext)
+msgid "Control how text gets copied from a PDF file"
msgstr ""
-#. description(texlive-xfor)
+#. description(texlive-specs-t:texlive-repltext)
msgid ""
-"The package redefines the LaTeX internal \\@for macro so that the loop may be prematurely terminated. The action is akin to the C/Java break statement, except that the loop does not terminate until the end of the current iteration\n"
+"The repltext package exposes to LaTeX a relatively obscure PDF feature: replacement text. When replacement text is specified for a piece of text, it is the replacement text, not the typeset text that is copied and pasted.\n"
"\n"
-"date: 2009-02-05 22:18:07 +0000"
+"date: 2014-04-25 09:20:11 +0000"
msgstr ""
-#. description(texlive-luabibentry)
-msgid ""
-"The package reimplements bibentry, for use in LuaLaTeX.\n"
-"\n"
-"date: 2011-06-30 16:17:02 +0000"
+#. summary(texlive-specs-t:texlive-repltext-doc)
+#, fuzzy
+msgid "Documentation for texlive-repltext"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-repltext-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-repltext"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-resphilosophica)
+msgid "Typeset articles for the journal Res Philosophica"
msgstr ""
-#. description(yast2-trans-allpacks)
+#. description(texlive-specs-t:texlive-resphilosophica)
msgid ""
-"The package requires all YaST translation packages (yast2-trans-{??,??_??}). Otherwise it is empty.\n"
+"Th bundle provides a class for typesetting articles for the journal Res Philosophica. Development was commissioned by Saint Louis University.\n"
"\n"
-"For internal use only."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pdfsync)
-msgid ""
-"The package runs with pdfTeX or XeTeX, and creates an auxiliary file with geometrical information to permit references back and forth between source and PDF, assuming a conforming editor and PDF viewer.\n"
-"\n"
-"date: 2010-11-08 20:04:31 +0000"
+#. summary(texlive-specs-t:texlive-resphilosophica-doc)
+msgid "Documentation for texlive-resphilosophica"
msgstr ""
-#. description(texlive-msc)
-msgid ""
-"The package should be useful to all people that prepare their texts with LaTeX and want to draw Message Sequence Charts in their texts. The package is not an MSC editor; it simply takes a textual description of an MSC and draws the corresponding MSC. The current version of the MSC macro package supports the full MSC2000 language.\n"
-"\n"
-"date: 2008-06-02 12:52:39 +0000"
+#. description(texlive-specs-t:texlive-resphilosophica-doc)
+msgid "This package includes the documentation for texlive-resphilosophica"
msgstr ""
-#. description(texlive-makeshape)
-msgid ""
-"The package simplifies production of custom shapes with correct anchor borders, in PGF/TikZ; the only requirement is a PGF path describing the anchor border. The package also provides macros that help with the management of shape parameters, and the definition of anchor points.\n"
-"\n"
-"date: 2013-01-28 10:48:01 +0000"
+#. summary(texlive-specs-t:texlive-resumecls)
+msgid "Typeset a resumee in both Chinese and English"
msgstr ""
-#. description(texlive-wordlike)
+#. description(texlive-specs-t:texlive-resumecls)
msgid ""
-"The package simulates typical word processor layout: narrow page margins, Times, Helvetica and Courier fonts, \\LARGE or \\Large headings, and \\sloppy typesetting. The package aims at making life easier for users who are discontent with LaTeX's standard layout settings because they need a layout that resembles the usual \"wordlike\" output. The design of the package draws on several discussions in the de.comp.text.tex and comp.text.tex newsgroups that are referred to in the manual.\n"
+"The class provides a simple resumee structure that works, natively, with both Chinese and English text.\n"
"\n"
-"date: 2009-06-03 07:03:24 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-kantlipsum)
-msgid ""
-"The package spits out sentences in Kantian style; the text is provided by the Kant generator for Python by Mark Pilgrim, described in the book \"Dive into Python\". The package is modelled on lipsum, and may be used for similar purposes.\n"
-"\n"
-"date: 2012-03-12 19:30:51 +0000"
+#. summary(texlive-specs-t:texlive-resumecls-doc)
+msgid "Documentation for texlive-resumecls"
msgstr ""
-#. description(texlive-xepersian)
-msgid ""
-"The package supports Persian typesetting, using the Persian Modern fonts, by default.\n"
-"\n"
-"date: 2013-04-26 11:45:29 +0000"
+#. description(texlive-specs-t:texlive-resumecls-doc)
+msgid "This package includes the documentation for texlive-resumecls"
msgstr ""
-#. description(texlive-xunicode)
+#. summary(texlive-specs-t:texlive-resumemac)
+#, fuzzy
+msgid "Plain TeX macros for resumes"
+msgstr "TeXová makra pro šachové diagramy"
+
+#. description(texlive-specs-t:texlive-resumemac)
msgid ""
-"The package supports XeTeX's (and other putative future similar engines') need for Unicode characters, in a similar way to what the fontenc does for 8-bit (and the like) fonts: convert accent-glyph sequence to a single Unicode character for output. The package also covers glyphs specified by packages (such as tipa) which define many commands for single text glyphs.\n"
+"A set of macros is provided, together with an file that offers an example of use.\n"
"\n"
-"date: 2012-07-21 15:20:52 +0000"
+"date: 2012-06-13 11:45:03 +0000"
msgstr ""
-#. description(texlive-pst-thick)
-msgid ""
-"The package supports drawing of very thick lines and curves in PSTricks, with various fillings for the body of the lines.\n"
-"\n"
-"date: 2009-12-14 15:47:24 +0000"
+#. summary(texlive-specs-t:texlive-resumemac-doc)
+#, fuzzy
+msgid "Documentation for texlive-resumemac"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-resumemac-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-resumemac"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-reverxii)
+msgid "Playing Reversi in TeX"
msgstr ""
-#. description(texlive-sepfootnotes)
+#. description(texlive-specs-t:texlive-reverxii)
msgid ""
-"The package supports footnotes and endnotes from separate files. This is achieved with commands \\sepfootnotecontent and \\sepfootnote; the former defines the content of a note, while the latter typesets that note.\n"
+"Following the lead of xii.tex, this little (938 characters) program that plays Reversi. (The program incorporates some primitive AI.)\n"
"\n"
-"date: 2013-01-19 00:10:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-zed-csp)
-msgid ""
-"The package supports real-time CSP and incorporates the functionality of Spivey's original Z package, written for LaTeX 2.09.\n"
-"\n"
-"date: 2008-04-05 19:05:50 +0000"
+#. summary(texlive-specs-t:texlive-revtex)
+msgid "Styles for various Physics Journals"
msgstr ""
-#. description(texlive-ocr-latex)
+#. description(texlive-specs-t:texlive-revtex)
msgid ""
-"The package supports use of both ocr-a and ocr-b fonts in LaTeX documents.\n"
+"Includes styles for American Physical Society, American Institute of Physics, and Optical Society of America. The distribution consists of the RevTeX class itself, and several support packages.\n"
"\n"
-"date: 2007-03-11 13:06:37 +0000"
+"date: 2014-02-15 15:22:18 +0000"
msgstr ""
-#. description(texlive-serbian-lig)
-msgid ""
-"The package suppresses fi and fl (and other ligatures) in Serbian text written using Roman script.\n"
-"\n"
-"date: 2011-07-03 07:55:42 +0000"
+#. summary(texlive-specs-t:texlive-revtex-doc)
+#, fuzzy
+msgid "Documentation for texlive-revtex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-revtex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-revtex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-revtex4)
+msgid "Package revtex4"
+msgstr "Balíček revtex4"
+
+#. description(texlive-specs-t:texlive-revtex4)
+msgid "The revtex4 package"
msgstr ""
-#. description(texlive-selnolig)
-msgid ""
-"The package suppresses typographic ligatures selectively, i.e., based on predefined search patterns. The search patterns focus on ligatures deemed inappropriate because they span morpheme boundaries. For example, the word shelfful, which is mentioned in the TeXbook as a word for which the ff ligature might be inappropriate, is automatically typeset as shelf\\/ful rather than as shel{ff}ul. For English and German language documents, the package provides extensive rules for the selective suppression of so-called \"common\" ligatures. These comprise the ff, fi, fl, ffi, and ffl ligatures as well as the ft and fft ligatures. Other f-ligatures, such as fb, fh, fj and fk, are suppressed globally, while exceptions are made for names and words of non-English/German origin, such as Kafka and fjord. For English language documents, the package further provides ligature suppression macros for a number of so-called \"discretionary\" or \"rare\" ligatures such as ct, st, and sp. The package requ
ires use of a recent LuaLaTeX format (for example TeXLive2012 or 2013, or MiKTeX2.9).\n"
-"\n"
-"date: 2013-05-28 17:52:13 +0000"
+#. summary(texlive-specs-t:texlive-revtex4-doc)
+#, fuzzy
+msgid "Documentation for texlive-revtex4"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-revtex4-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-revtex4"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-ribbonproofs)
+msgid "Drawing ribbon proofs"
msgstr ""
-#. description(texlive-ucharclasses)
+#. description(texlive-specs-t:texlive-ribbonproofs)
msgid ""
-"The package takes care of switching fonts when you switch from one Unicode block to another in the text of a document. This way, you can write a document with no explicit font selection, but a series of rules of the form \"when entering block ..., switch font to use ...\".\n"
+"The package provides a way to draw \"ribbon proofs\" in LaTeX. A ribbon proof is a diagrammatic representation of a mathematical proof that a computer program meets its specification. These diagrams are more human-readable, more scalable, and more easily modified than the corresponding textual proofs.\n"
"\n"
-"date: 2012-09-26 14:27:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-minted)
+#. summary(texlive-specs-t:texlive-ribbonproofs-doc)
+#, fuzzy
+msgid "Documentation for texlive-ribbonproofs"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-ribbonproofs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ribbonproofs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rjlparshap)
+#, fuzzy
+msgid "Support for use of \\parshape in LaTeX"
+msgstr "Rozšíření Perlu pro psaní XML dokumentů"
+
+#. description(texlive-specs-t:texlive-rjlparshap)
msgid ""
-"The package that facilitates expressive syntax highlighting in LaTeX using the powerful Pygments library. The package also provides options to customize the highlighted source code output using fancyvrb.\n"
+"The package provides macros and environments that relieve the programmer of some of the difficulties of using \\parshape in LaTeX macros. It does not actually calculate shapes in the way that the shapepar package does.\n"
"\n"
-"date: 2011-09-17 22:13:37 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-showcharinbox)
-msgid ""
-"The package typesets a character inside a box, showing where reference point is, and displaying width, height, and depth information of the character. The output is like that on page 63 of \"The TeXBook\" or page 101 of \"The METAFONTbook\". The package itself is motivated by Knuth's macros in the file manmac.tex. Users should note that using a small size for the character inside the box does not make any sense: use a large size.\n"
-"\n"
-"date: 2013-04-08 07:07:09 +0000"
+#. summary(texlive-specs-t:texlive-rjlparshap-doc)
+#, fuzzy
+msgid "Documentation for texlive-rjlparshap"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-rjlparshap-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rjlparshap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rlepsf)
+msgid "Rewrite labels in EPS graphics"
msgstr ""
-#. description(texlive-pst-soroban)
+#. description(texlive-specs-t:texlive-rlepsf)
msgid ""
-"The package uses PSTricks to draw a Japanese abacus, or soroban. The soroban is still used in Japan today.\n"
+"A macro package for use with epsf.tex which allows PostScript labels in an Encapsulated PostScript file to be replaced by TeX labels. The package provides commands \\relabel (simply replace a PostScript string), \\adjustrelabel (replace a PostScript string, with position adjustment), and \\extralabel (add a label at given coordinates). You can, if you so choose, use the facilities of the labelfig package in place of using \\extralabel.\n"
"\n"
-"date: 2008-08-22 22:25:16 +0000"
+"date: 2012-06-04 11:41:04 +0000"
msgstr ""
-#. description(texlive-pst-tvz)
-msgid ""
-"The package uses PSTricks to draw trees with more than one root node. It is similar to pst-tree, though it uses a different placement algorithm.\n"
-"\n"
-"date: 2011-06-14 15:30:27 +0000"
+#. summary(texlive-specs-t:texlive-rlepsf-doc)
+#, fuzzy
+msgid "Documentation for texlive-rlepsf"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rlepsf-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rlepsf"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rmpage)
+msgid "A package to help change page layout parameters in LaTeX"
msgstr ""
-#. description(texlive-pst-ob3d)
+#. description(texlive-specs-t:texlive-rmpage)
msgid ""
-"The package uses PSTricks to provide basic three-dimensional objects. As yet, only cubes (which can be deformed to rectangular parallelipipeds) and dies (which are only a special kind of cubes) are defined.\n"
+"The package lets you change page layout parameters in small steps over a range of values using options. It can set \\textwidth appropriately for the main fount, and ensure that the text fits inside the printable area of a printer. An rmpage-formatted document can be typeset identically without rmpage after a single cut and paste operation. Local configuration can set defaults: for all documents; and by class, by printer, and by paper size. The geometry package is better if you want to set page layout parameters to particular measurements.\n"
"\n"
-"date: 2008-08-22 22:25:16 +0000"
+"date: 2012-06-13 11:45:03 +0000"
msgstr ""
-#. description(texlive-pst-rubans)
-msgid ""
-"The package uses PStricks and pst-solides3d to draw three dimensional ribbons on a cylinder, torus, sphere, cone or paraboloid. The width of the ribbon, the number of turns, the colour of the outer and the inner surface of the ribbon may be set. In the case of circular and conical helices, one may also choose the number of ribbons.\n"
-"\n"
-"date: 2011-06-24 08:29:05 +0000"
+#. summary(texlive-specs-t:texlive-rmpage-doc)
+#, fuzzy
+msgid "Documentation for texlive-rmpage"
+msgstr "HTML dokumentace pro GNU C Library"
+
+#. description(texlive-specs-t:texlive-rmpage-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rmpage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-robustcommand)
+msgid "Declare robust command, with \\newcommand checks"
msgstr ""
-#. description(texlive-pst-vectorian)
+#. description(texlive-specs-t:texlive-robustcommand)
msgid ""
-"The package uses PStricks to draw ornaments (a substantial repertoire of ornaments is provided).\n"
+"The package merely provides a variation of \\DeclareRobustCommand, which checks for the existence of a command before declaring it robust.\n"
"\n"
-"date: 2013-01-11 10:15:33 +0000"
+"date: 2012-06-13 11:45:03 +0000"
msgstr ""
-#. description(texlive-tableaux)
-msgid ""
-"The package uses PStricks; the user may define the width of the table, the number of lines and the height of each line. Placement of labels within the boxes may be absolute, or as a percentage of the width; various other controls are available.\n"
-"\n"
-"date: 2008-11-10 20:50:32 +0000"
+#. summary(texlive-specs-t:texlive-robustcommand-doc)
+#, fuzzy
+msgid "Documentation for texlive-robustcommand"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-robustcommand-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-robustcommand"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-robustindex)
+msgid "Create index with pagerefs"
msgstr ""
-#. description(texlive-mathastext)
+#. description(texlive-specs-t:texlive-robustindex)
msgid ""
-"The package uses a text font (usually the document's text font) for the letters of the Latin alphabet needed when typesetting mathematics. (Optionally, other characters in the font may also be used). This facility makes possible (for a document with simple mathematics) a far wider choice of text font, with little worry that no specially designed accompanying maths fonts are available. The package also offers a simple mechanism for using many different choices of (text hence, now, maths) font in the same document. Of course, using one font for two purposes helps produce smaller PDF files.\n"
+"Third parties often change the page numbers without rerunning makeindex. One would like to make the page numbers in the index entries more robust. This bundle provides robustindex.sty and robustglossary.sty, which use the \\pageref mechanism to maintain correct page numbers\n"
"\n"
-"date: 2013-01-21 12:03:31 +0000"
+"date: 2012-06-15 19:53:47 +0000"
msgstr ""
-#. description(texlive-lua-visual-debug)
-msgid ""
-"The package uses lua code to provide visible indications of boxes, glues, kerns and penalties in the PDF output. The package is known to work in LaTeX and Plain TeX documents.\n"
-"\n"
-"date: 2012-04-08 11:49:02 +0000"
+#. summary(texlive-specs-t:texlive-robustindex-doc)
+#, fuzzy
+msgid "Documentation for texlive-robustindex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-robustindex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-robustindex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-roex)
+msgid "Package roex"
+msgstr "Balíček roex"
+
+#. description(texlive-specs-t:texlive-roex)
+msgid "The roex package"
msgstr ""
-#. description(texlive-pst-solarsystem)
-msgid ""
-"The package uses pstricks to produce diagrams of the visible planets, projected on the plane of the ecliptic. It is not possible to represent all the planets in their real proportions, so only Mercury, Venus, Earth and Mars have their orbits in correct proportions and their relative sizes are observed. Saturn and Jupiter are in the right direction, but not in the correct size.\n"
-"\n"
-"date: 2012-01-01 18:16:20 +0000"
+#. summary(texlive-specs-t:texlive-romanbar)
+msgid "Write roman number with \"bars\""
msgstr ""
-#. description(texlive-realboxes)
+#. description(texlive-specs-t:texlive-romanbar)
msgid ""
-"The package uses the author's package collectbox to define variants of common box related macros which read the content as real box and not as macro argument. This enables the use of verbatim or other special material as part of this content. The provided macros have the same names as the original versions but start with an upper-case letter instead. The \"long-form\" macros, like \\Makebox, can also be used as environments, but not the \"short-form\" macros, like \\Mbox. However, normally the long form uses the short form anyway when no optional arguments are used.\n"
+"'Bars', in the present context, are lines above and below text that abut with the text. Barred roman numerals are sometimes found in publications. The package provides a function that prints barred roman numerals (converting arabic numerals if necessary). The package also provides a predicate \\ifnumeric.\n"
"\n"
-"date: 2011-08-16 08:35:18 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pageslts)
-msgid ""
-"The package was designed as an extension of the lastpage package -- as well as that package's LastPage label (created \\AtEndDocument) it adds a VeryLastPage (created \\AfterLastShipout). When more than one page numbering scheme is in operation (as in a book class document with frontmatter), the labels above do not give the total number of pages, so the package also provides labels pagesLTS.<numbering scheme>, where the numbering scheme is arabic, roman, etc. The package relies on the undolabl package.\n"
-"\n"
-"date: 2013-01-28 21:45:23 +0000"
+#. summary(texlive-specs-t:texlive-romanbar-doc)
+#, fuzzy
+msgid "Documentation for texlive-romanbar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-romanbar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-romanbar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-romande)
+msgid "Romande ADF fonts and LaTeX support"
msgstr ""
-#. description(texlive-truncate)
+#. description(texlive-specs-t:texlive-romande)
msgid ""
-"The package will by default break at word boundaries, but package options are offered to permit breaks within words.\n"
+"Romande ADF is a serif font family with oldstyle figures, designed as a substitute for Times, Tiffany or Caslon. The family currently includes upright, italic and small-caps shapes in each of regular and demi-bold weights and an italic script in regular. The support package renames the fonts according to the Karl Berry fontname scheme and defines four families. Two of these primarily provide access to the \"standard\" or default characters while the \"alternate\" families support alternate characters, additional ligatures and the long s. The included package files provide access to these features in LaTeX as explained in the documentation. The LaTeX support requires the nfssext-cfr and the xkeyval packages.\n"
"\n"
-"date: 2010-06-06 11:50:32 +0000"
+"date: 2014-05-07 21:10:33 +0000"
msgstr ""
-#. description(texlive-smartdiagram)
-msgid ""
-"The package will create 'smart' diagrams from lists of items, for simple documents and for presentations.\n"
-"\n"
-"date: 2013-04-02 00:01:45 +0000"
+#. summary(texlive-specs-t:texlive-romande-doc)
+#, fuzzy
+msgid "Documentation for texlive-romande"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-romande-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-romande"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-romande-fonts)
+msgid "Severed fonts for texlive-romande"
msgstr ""
-#. description(texlive-xevlna)
-msgid ""
-"The package will directly insert nonbreakable spaces (in Czech, vlna or vlnka), after nonsyllabic prepositions and single letter conjuctions, while the document is being typeset. (The macros recognised maths and verbatim by TeX means.) (Inserting nonbreakable spaces by a preprocessor will probably never be fully reliable, because user defined macros and environments cannot reliably be recognised.) The package works both with (Plain) XeTeX and with XeLaTeX.\n"
-"\n"
-"date: 2013-04-23 09:12:19 +0000"
+#. description(texlive-specs-t:texlive-romande-fonts)
+msgid "The separated fonts package for texlive-romande"
msgstr ""
-#. description(texlive-pst-fractal)
-msgid ""
-"The package will draw the Julia and Mandelbrot sets, the Sierpinski triangle, Koch flake, and Apollonius Circle as well as fractal trees (which need not be balanced) with a variety of different parameters (including varying numbers of iterations). The package uses the pst-xkey package, part of the xkeyval distribution.\n"
-"\n"
-"date: 2010-02-10 20:21:32 +0000"
+#. summary(texlive-specs-t:texlive-romanneg)
+msgid "Roman page numbers negative"
msgstr ""
-#. description(texlive-regstats)
+#. description(texlive-specs-t:texlive-romanneg)
msgid ""
-"The package will report number of used registers (counter, dimen, skip, muskip, box, token, input, output, math families, languages, insertions), and will compare the number to the maximum available number of such registers.\n"
+"Causes the page numbers in the DVI file (as defined by \\count0) to be negative when roman pagenumbering is in effect.\n"
"\n"
-"date: 2012-01-02 13:24:13 +0000"
+"date: 2012-06-15 19:53:47 +0000"
msgstr ""
-#. description(texlive-objectz)
-msgid ""
-"The package will typeset both Z and Object-Z specifications; it develops the original zed package\n"
-"\n"
-"date: 2006-12-30 21:14:40 +0000"
+#. summary(texlive-specs-t:texlive-romanneg-doc)
+#, fuzzy
+msgid "Documentation for texlive-romanneg"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-romanneg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-romanneg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-romannum)
+msgid "Generate roman numerals instead of arabic digits"
msgstr ""
-#. description(texlive-setdeck)
+#. description(texlive-specs-t:texlive-romannum)
msgid ""
-"The package will typeset cards for use in a game of Set.\n"
+"The romannum package changes LaTeX generated numbers to be printed with roman numerals instead of arabic digits. It requires the stdclsdv package. Users of the bookhands fonts may find this package useful.\n"
"\n"
-"date: 2012-10-17 13:07:15 +0000"
+"date: 2012-06-15 19:53:47 +0000"
msgstr ""
-#. description(texlive-pstool)
-msgid ""
-"The package works in the same sort of way as pst-pdf, but it also processes the PostScript graphics with psfrag to add labels within the graphic, before conversion. Thus the bundle replaces two steps of an ordinary workflow. (Naturally, the package requires that \\write 18 is enabled.) Pstool ensures that each version of each graphic is compiled once only (the graphic is (re-)compiled only if it has changed since the previous compilation of the document). This drastically speeds up the running of the package in the typical case (though the first run of any document is inevitably just as slow as with any similar package).\n"
-"\n"
-"date: 2013-03-11 09:36:18 +0000"
+#. summary(texlive-specs-t:texlive-romannum-doc)
+#, fuzzy
+msgid "Documentation for texlive-romannum"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-romannum-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-romannum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rotating)
+msgid "Rotation tools, including rotated full-page floats"
msgstr ""
-#. description(texlive-iftex)
+#. description(texlive-specs-t:texlive-rotating)
msgid ""
-"The package, which works both for Plain TeX and for LaTeX, defines the \\ifPDFTeX, \\ifXeTeX, and \\ifLuaTeX conditionals for testing which engine is being used for typesetting. The package also provides the \\RequirePDFTeX, \\RequireXeTeX, and \\RequireLuaTeX commands which throw an error if pdfTeX, XeTeX or LuaTeX (respectively) is not the engine in use.\n"
+"A package built on the standard LaTeX graphics package to perform all the different sorts of rotation one might like, including complete figures and tables with their captions. If you want continuous text (i.e., more than one page) set in landscape mode, use the lscape package instead. The rotating packages only deals in rotated boxes (or floats, which are themselves boxes), and boxes always stay on one page. If you need to use the facilities of the float in the same document, load rotating.sty via rotfloat, which smooths the path between the rotating and float packages.\n"
"\n"
-"date: 2013-04-04 15:50:40 +0000"
+"date: 2013-05-02 09:49:25 +0000"
msgstr ""
-#. description(texlive-liturg)
-msgid ""
-"The packages offers simple macros for typesetting Catholic liturgical texts, particularly Missal and Breviary texts. The package assumes availability of Latin typesetting packages.\n"
-"\n"
-"date: 2008-09-08 09:32:46 +0000"
+#. summary(texlive-specs-t:texlive-rotating-doc)
+#, fuzzy
+msgid "Documentation for texlive-rotating"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rotating-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rotating"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rotfloat)
+msgid "Rotate floats"
msgstr ""
-#. description(texlive-pagenote)
+#. description(texlive-specs-t:texlive-rotfloat)
msgid ""
-"The pagenote package provides tagged notes on a separate page (also known as 'end notes'). Unless the memoir class is used, the package requires the ifmtarg package.\n"
+"The float package provides commands to define new floats of various styles (plain, boxed, ruled, and userdefined ones); the rotating package provides new environments (sidewaysfigure and sidewaystable) which are rotated by 90 or 270 degrees. But what about new rotated floats, e.g. a rotated ruled one? This package makes this possible; it builds a bridge between the two packages and extends the commands from the float package to define rotated versions of the new floats, too.\n"
"\n"
-"date: 2009-09-03 11:00:14 +0000"
+"date: 2012-06-15 19:53:47 +0000"
msgstr ""
-#. description(texlive-patchcmd)
-msgid ""
-"The patchcmd package provides a command \\patchcommand that can be used to add material at the beginning and/or the end of the replacement text of an existing macro. It works for macros with any number of normal arguments, including those that were defined with \\DeclareRobustCommand.\n"
-"\n"
-"date: 2007-01-12 19:52:49 +0000"
+#. summary(texlive-specs-t:texlive-rotfloat-doc)
+#, fuzzy
+msgid "Documentation for texlive-rotfloat"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rotfloat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rotfloat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rotpages)
+msgid "Typeset sets of pages upside-down and backwards"
msgstr ""
-#. description(texlive-pauldoc)
+#. description(texlive-specs-t:texlive-rotpages)
msgid ""
-"The pauldoc package provides helpers for German language package documentation.\n"
+"The rotpages package allows you to format documents where small sets of pages are rotated by 180 degrees and rearranged, so that they can be read by turning the printed copy upside-down. It was developed for collecting exercises and solutions: using the package, you can print the exercise text normally and the solutions rotated.\n"
"\n"
-"date: 2009-11-10 12:46:41 +0000"
+"date: 2012-06-17 09:01:39 +0000"
msgstr ""
-#. description(texlive-pb-diagram)
+#. summary(texlive-specs-t:texlive-rotpages-doc)
+#, fuzzy
+msgid "Documentation for texlive-rotpages"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rotpages-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rotpages"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-roundbox)
+msgid "Round boxes in LaTeX"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-roundbox)
msgid ""
-"The pb-diagram package\n"
+"This package implements a command \\roundbox that can be used, in LaTeX, for producing boxes, framed with rounded corners.\n"
"\n"
-"date: 2008-04-20 17:53:04 +0000"
+"date: 2014-04-29 04:13:54 +0000"
msgstr ""
-#. description(texlive-pdfwin)
-msgid "The pdfwin package"
+#. summary(texlive-specs-t:texlive-roundbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-roundbox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-roundbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-roundbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rrgtrees)
+msgid "Linguistic tree diagrams for Role and Reference Grammar (RRG) with LaTeX"
msgstr ""
-#. description(texlive-pecha)
+#. description(texlive-specs-t:texlive-rrgtrees)
msgid ""
-"The pecha class provides an environment for writing Tibetan on LaTeX2e in the traditional Tibetan Pecha layout used for spiritual or philosophical texts, using the cTib4TeX package by Oliver Corff. It provides features like headers in different languages, page numbering in Tibetan and more.\n"
+"A set of LaTeX macros that makes it easy to produce linguistic tree diagrams suitable for Role and Reference Grammar (RRG). This package allows the construction of trees with crossing lines, as is required by this theory for many languages. There is no known limit on number of tree nodes or levels. Requires the pst-node and pst-tree LaTeX packages.\n"
"\n"
-"date: 2006-10-13 11:00:52 +0000"
+"date: 2012-08-13 10:34:19 +0000"
msgstr ""
-#. description(texlive-texloganalyser)
-msgid ""
-"The perl script allows the user to extract (and display) elements of the log file\n"
-"\n"
-"date: 2010-07-22 12:36:43 +0000"
+#. summary(texlive-specs-t:texlive-rrgtrees-doc)
+msgid "Documentation for texlive-rrgtrees"
msgstr ""
-#. description(texlive-pkfix)
-msgid ""
-"The perl script pkfix looks for DVIPSBitmapFont comments in PostScript files, generated by 'not too old' dvips, and replaces them by type 1 versions of the fonts, if possible.\n"
-"\n"
-"date: 2012-04-18 14:26:37 +0000"
+#. description(texlive-specs-t:texlive-rrgtrees-doc)
+msgid "This package includes the documentation for texlive-rrgtrees"
msgstr ""
-#. description(texlive-pgfopts)
-msgid ""
-"The pgfkeys package (part of the pgf distribution) is a well- designed way of defining and using large numbers of keys for key-value syntaxes. However, pgfkeys itself does not offer means of handling LaTeX class and package options. This package adds such option handling to pgfkeys, in the same way that kvoptions adds the same facility to the LaTeX standard keyval package.\n"
-"\n"
-"date: 2011-06-02 22:21:14 +0000"
+#. summary(texlive-specs-t:texlive-rsc)
+msgid "BibTeX style for use with RSC journals"
msgstr ""
-#. description(texlive-philokalia)
+#. description(texlive-specs-t:texlive-rsc)
msgid ""
-"The philokalia package has been designed to ease the use of the Philokalia-Regular OpenType font with XeLaTeX. The font started as a project to digitize the typeface used to typeset the Philokalia books.\n"
+"The rsc package provides a BibTeX style in accordance with the requirements of the Royal Society of Chemistry. It was originally based on the file pccp.bst, but also implements a number of styles from the achemso package. The package is now a stub for the chemstyle package, which the author developed to unify the writing of articles with a chemistry content.\n"
"\n"
-"date: 2007-09-24 08:59:32 +0000"
+"date: 2012-06-04 14:55:44 +0000"
msgstr ""
-#. description(texlive-piechartmp)
+#. summary(texlive-specs-t:texlive-rsc-doc)
+#, fuzzy
+msgid "Documentation for texlive-rsc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rsc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rsc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rsfs)
+msgid "Ralph Smith's Formal Script font"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-rsfs)
msgid ""
-"The piechartmp package is an easy way to draw pie-charts with MetaPost. The package implements an interface that enables users with little MetaPost experience to draw charts. A highlight of the package is the possibility of suppressing some segments of the chart, thus creating the possibility of several charts from the same data.\n"
+"The fonts provide uppercase 'formal' script letters for use as symbols in scientific and mathematical typesetting (in contrast to the informal script fonts such as that used for the 'calligraphic' symbols in the TeX maths symbol font). The fonts are provided as Metafont source, and as derived Adobe Type 1 format. LaTeX support, for using these fonts in mathematics, is available via one of the packages calrsfs and mathrsfs.\n"
"\n"
-"date: 2007-01-13 19:56:44 +0000"
+"date: 2014-05-07 21:10:33 +0000"
msgstr ""
-#. description(texlive-plain)
-msgid "The plain package"
+#. summary(texlive-specs-t:texlive-rsfs-doc)
+#, fuzzy
+msgid "Documentation for texlive-rsfs"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rsfs-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rsfs"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rsfs-fonts)
+msgid "Severed fonts for texlive-rsfs"
msgstr ""
-#. description(texlive-plainpkg)
-msgid "The plainpkg package"
+#. description(texlive-specs-t:texlive-rsfs-fonts)
+msgid "The separated fonts package for texlive-rsfs"
msgstr ""
-#. description(texlive-plates)
-msgid ""
-"The plates package provides a simple facility for inserting colour figures in a document when they should be gathered and printed together as in a book's section of colour plates. The package provides a plate environment that takes the place of the figure environment for such colour images.\n"
-"\n"
-"date: 2007-01-07 23:37:16 +0000"
+#. summary(texlive-specs-t:texlive-rsfso)
+msgid "A mathematical calligraphic font based on rsfs"
msgstr ""
-#. description(texlive-polynom)
+#. description(texlive-specs-t:texlive-rsfso)
msgid ""
-"The polynom package implements macros for manipulating polynomials, for example it can typeset long polynomial divisions. The main test case and application is the polynomial ring in one variable with rational coefficients.\n"
+"The package provides virtual fonts and LaTeX support files for mathematical calligraphic fonts based on the rsfs Adobe Type 1 fonts (which must also be present for successful installation, with the slant substantially reduced. The output is quite similar to that from the Adobe Mathematical Pi script font.\n"
"\n"
-"date: 2007-01-13 22:45:25 +0000"
+"date: 2014-05-07 21:10:33 +0000"
msgstr ""
-#. description(texlive-pracjourn)
-msgid ""
-"The pracjourn class is used for typesetting articles in the PracTeX Journal. It is based on the article class with modifications to allow for more flexible front-matter and revision control, among other small changes.\n"
-"\n"
-"date: 2008-11-30 12:31:17 +0000"
+#. summary(texlive-specs-t:texlive-rsfso-doc)
+#, fuzzy
+msgid "Documentation for texlive-rsfso"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rsfso-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rsfso"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rterface)
+msgid "Access to R analysis from within a document"
msgstr ""
-#. description(texlive-protocol)
+#. description(texlive-specs-t:texlive-rterface)
msgid ""
-"The present version of the class supports German meeting minutes including vote results and action items. The author has ambitions to internationalise the code, and would welcome support in the work.\n"
+"The package mediates interaction between LaTeX and R; it allows LaTeX to set R's parameters, and provides code to read R output.\n"
"\n"
-"date: 2012-03-03 17:35:38 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-proposal)
-msgid ""
-"The process of preparing a collaborative proposal, to a major funding body, involves integration of contributions of a many people at many sites. It is therefore an ideal application for a text-based document preparation system such as LaTeX, in concert with a distributed version control system such as SVN. The proposal class itself provides a basis for such an enterprise. The dfgproposal and dfgproposal classes provide two specialisations of the base class for (respectively) German and European research proposals. The packages depend on the author's stex bundle.\n"
-"\n"
-"date: 2013-02-19 12:34:37 +0000"
+#. summary(texlive-specs-t:texlive-rterface-doc)
+msgid "Documentation for texlive-rterface"
msgstr ""
-#. description(texlive-metafont)
-msgid ""
-"The program takes a semi-algorithmic specification of a font, and produces a bitmap font (whose properties are defined by a set of parameters of the target device), and a set metrics for use by TeX. The bitmap output may be converted into a format directly usable by a device driver, etc., by the tools provided in the parallel mfware distribution. (Third parties have developed tools to convert the bitmap output to outline fonts.) The distribution includes the source of Knuth's Metafont book; this source is there to read, as an example of writing TeX -- it should not be processed without Knuth's direct permission.\n"
-"\n"
-"date: 2012-08-30 20:47:45 +0000"
+#. description(texlive-specs-t:texlive-rterface-doc)
+msgid "This package includes the documentation for texlive-rterface"
msgstr ""
-#. description(texlive-sa-tikz)
-msgid ""
-"The provides a library that offers an easy way to draw switching architectures and to customize their aspect.\n"
-"\n"
-"date: 2013-01-03 18:43:19 +0000"
+#. summary(texlive-specs-t:texlive-rtkinenc)
+msgid "Input encoding with fallback procedures"
msgstr ""
-#. description(texlive-psgo)
+#. description(texlive-specs-t:texlive-rtkinenc)
msgid ""
-"The psgo package\n"
+"The rtkinenc package is functionally similar to the standard LaTeX package inputenc: both set up active characters so that an input character outside the range of 7-bit visible ASCII is coverted into one or more corresponding LaTeX commands. The main difference lies in that rtkinenc allows the user to specify a fallback procedure to use when the text command corresponding to some input character isn't available. Names of commands in rtkinenc have been selected so that it can read inputenc encoding definition files, and the aim is that rtkinenc should be backwards compatible with inputenc. rtkinenc is not a new version of inputenc though, nor is it part of standard LaTeX. For an example of how rtkinenc is used, the user may look at the tclldoc class.\n"
"\n"
-"date: 2008-09-06 17:20:59 +0000"
+"date: 2012-06-04 14:55:44 +0000"
msgstr ""
-#. description(texlive-pst-3d)
+#. summary(texlive-specs-t:texlive-rtkinenc-doc)
+#, fuzzy
+msgid "Documentation for texlive-rtkinenc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rtkinenc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rtkinenc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rtklage)
+msgid "A package for German lawyers"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-rtklage)
msgid ""
-"The pst-3d package provides basic macros for shadows, tilting and three dimensional representations of text or graphical objects.\n"
+"RATeX is a newly developed bundle of packages and classes provided for German lawyers. Now in the early beginning it only contains rtklage, a class to make lawsuits.\n"
"\n"
-"date: 2010-02-15 09:59:10 +0000"
+"date: 2012-06-03 14:14:40 +0000"
msgstr ""
-#. description(texlive-pst-barcode)
+#. summary(texlive-specs-t:texlive-rtklage-doc)
+#, fuzzy
+msgid "Documentation for texlive-rtklage"
+msgstr "HTML dokumentace pro GNU C Library"
+
+#. description(texlive-specs-t:texlive-rtklage-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rtklage"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rubik)
+msgid "Document Rubik cube configurations and rotation sequences"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-rubik)
msgid ""
-"The pst-barcode package allows printing of barcodes, in a huge variety of formats (see documentation for details). As a pstricks package, the package requires pstricks. The package uses PostScript for calculating the bars. For PDF output use a multi-pass mechansism such as pst-pdf.\n"
+"The bundle provides two packages: rubikcube provides commands for typesetting Rubik cubes and their transformations; and rubikrotation which can process a sequence of Rubik rotation moves, with the help of a Perl package executed via \\write18 (shell escape) commands.\n"
"\n"
-"date: 2012-11-16 19:45:05 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-calendar)
+#. summary(texlive-specs-t:texlive-rubik-doc)
+#, fuzzy
+msgid "Documentation for texlive-rubik"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rubik-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rubik"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-ruhyphen)
+#, fuzzy
+#| msgid "Russian ispell dictionary"
+msgid "Russian hyphenation"
+msgstr "Ruský slovník pro ispell"
+
+#. description(texlive-specs-t:texlive-ruhyphen)
msgid ""
-"The pst-calendar package uses pstricks and pst-3d to draw tabular calendars, or calendars on dodecahedra with a month to each face (the package also requires the multido and pst-xkey packages). The package works for years 2000-2099, and has options for calendars in French German and English, but the documentation is not available in English.\n"
+"A collection of Russian hyphenation patterns supporting a number of Cyrillic font encodings, including T2, UCY (Omega Unicode Cyrillic), LCY, LWN (OT2), and koi8-r.\n"
"\n"
-"date: 2009-03-30 08:35:07 +0000"
+"date: 2012-06-04 11:41:04 +0000"
msgstr ""
-#. description(texlive-pst-eucl-translation-bg)
+#. summary(texlive-specs-t:texlive-rulercompass)
+#, fuzzy
+msgid "A TikZ library for straight-edge and compass diagrams"
+msgstr "Knihovna pro jazyk C pro syntaktickou analýzu parametrů z příkazového řádku"
+
+#. description(texlive-specs-t:texlive-rulercompass)
msgid ""
-"The pst-eucl package documentation in Bulgarian language - Euclidean Geometry with PSTricks.\n"
+"The package defines some commands and styles to support drawing straight-edge and compass diagrams with TikZ.\n"
"\n"
-"date: 2010-07-08 13:45:43 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pst-ghsb)
-msgid "The pst-ghsb package"
-msgstr ""
+#. summary(texlive-specs-t:texlive-rulercompass-doc)
+#, fuzzy
+msgid "Documentation for texlive-rulercompass"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pstricks_calcnotes)
-msgid "The pstricks_calcnotes package"
+#. description(texlive-specs-t:texlive-rulercompass-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rulercompass"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-russ)
+msgid "LaTeX in Russian, without babel"
msgstr ""
-#. description(texlive-pxbase)
+#. description(texlive-specs-t:texlive-russ)
msgid ""
-"The pxbase package\n"
+"The package aims to facilitate Russian typesetting (based on input using MicroSoft Code Page 1251). Russian hyphenation is selected, and various mathematical commands are set up in Russian style. Furthermore all Cyrillic letters' catcodes are set to \"letter\", so that commands with Cyrillic letters in their names may be defined.\n"
"\n"
-"date: 2012-12-12 10:03:41 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pxchfon)
+#. summary(texlive-specs-t:texlive-russ-doc)
+#, fuzzy
+msgid "Documentation for texlive-russ"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-russ-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-russ"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rviewport)
+msgid "Relative Viewport for Graphics Inclusion"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-rviewport)
msgid ""
-"The pxchfon package\n"
+"Package graphicx provides a useful keyword viewport which allows to show just a part of an image. However, one needs to put there the actual coordinates of the viewport window. Sometimes it is useful to have relative coordinates as fractions of natural size. For example, one may want to print a large image on a spread, putting a half on a verso page, and another half on the next recto page. For this one would need a viewport occupying exactly one half of the file's bounding box, whatever the actual width of the image may be. This package adds a new keyword rviewport to the graphicx package specifiying Relative Viewport for graphics inclusion: a window defined by the given fractions of the natural width and height of the image.\n"
"\n"
-"date: 2013-05-18 15:41:16 +0000"
+"date: 2013-01-29 14:50:53 +0000"
msgstr ""
-#. description(texlive-pxcjkcat)
-msgid "The pxcjkcat package"
+#. summary(texlive-specs-t:texlive-rviewport-doc)
+#, fuzzy
+msgid "Documentation for texlive-rviewport"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-rviewport-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rviewport"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-rvwrite)
+msgid "Increase the number of available output streams in LaTeX"
msgstr ""
-#. description(texlive-pxjahyper)
+#. description(texlive-specs-t:texlive-rvwrite)
msgid ""
-"The pxjahyper package\n"
+"The package addresses, for LaTeX documents, the severe limitation on the number of output streams that TeX provides. The package uses a single TeX output stream, and writes \"marked-up\" output to this stream. The user may then post- process the marked-up output file, using LaTeX, and the document's output appears as separate files, according to the calls made to the package. The output to be post-processed uses macros from the widely-available ProTeX package.\n"
"\n"
-"date: 2012-12-11 13:08:29 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pxrubrica)
-msgid "The pxrubrica package"
-msgstr ""
+#. summary(texlive-specs-t:texlive-rvwrite-doc)
+#, fuzzy
+msgid "Documentation for texlive-rvwrite"
+msgstr "Dokumentace pro castor"
-#. description(texlive-qpxqtx)
-msgid "The qpxqtx package"
+#. description(texlive-specs-t:texlive-rvwrite-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-rvwrite"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-ryethesis)
+msgid "Class for Ryerson Unversity Graduate School requirements"
msgstr ""
-#. description(texlive-r_und_s)
+#. description(texlive-specs-t:texlive-ryethesis)
msgid ""
-"The r_und_s package decodes the german 'R- und S-Satze', which are numerically coded security advice for chemical substances into plain text. This is, e.g., used to compose security sheets or lab protocols and especially useful for students of chemistry. There are four packages, giving texts in German, English, French and Dutch.\n"
+"The class offers support for formatting a thesis, dissertation or project according to Ryerson University's School of Graduate Studies thesis formatting regulations.\n"
"\n"
-"date: 2008-08-24 20:21:06 +0000"
+"date: 2014-05-09 09:52:57 +0000"
msgstr ""
-#. description(texlive-ran_toks)
-msgid "The ran_toks package"
+#. summary(texlive-specs-t:texlive-ryethesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-ryethesis"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-ryethesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ryethesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sa-tikz)
+msgid "TikZ library to draw switching architectures"
msgstr ""
-#. description(texlive-randomwalk)
+#. description(texlive-specs-t:texlive-sa-tikz)
msgid ""
-"The randomwalk package provides a user command, \\RandomWalk, to draw random walks with a given number of steps. Lengths and angles of the steps can be customized in various ways. The package uses PGF/TikZ for its graphical output.\n"
+"The package provides a library that offers an easy way to draw switching architectures and to customize their aspect.\n"
"\n"
-"date: 2013-01-08 13:36:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-rccol)
-msgid ""
-"The rccol package provides decimal-centered numbers: corresponding digits and decimal separators aligned. Furthermore, rounding to the desired precision is possible. The package makes use of the fltpoint package (as well as the LaTeX required array package).\n"
-"\n"
-"date: 2008-04-20 17:53:04 +0000"
+#. summary(texlive-specs-t:texlive-sa-tikz-doc)
+msgid "Documentation for texlive-sa-tikz"
msgstr ""
-#. description(texlive-rcs)
-msgid ""
-"The rcs package utilizes the inclusion of RCS supplied data in LaTeX documents. It's upward compatible to *all* rcs styles I know of. In particular, you can easily - access values of every RCS field in your document - put the checkin date on the titlepage - put RCS fields in a footline You can typeset revision logs. Not in verbatim -- real LaTeX text! But you need a configurable RCS for that. Refer to the user manual for more detailed information. You can also configure the rcs package easily to do special things for any keyword. This bundle comes with a user manual, an internal interface description, full documentation of the implementation, style information for AUC- TeX, and test cases.\n"
-"\n"
-"date: 2007-06-06 15:06:28 +0000"
+#. description(texlive-specs-t:texlive-sa-tikz-doc)
+msgid "This package includes the documentation for texlive-sa-tikz"
msgstr ""
-#. description(texlive-recipecard)
-msgid ""
-"The recipecard class typesets recipes into note card sized boxes that can then be cut out and pasted on to note cards. The recipe then looks elegant and fits in the box of recipes.\n"
-"\n"
-"date: 2008-08-24 08:50:19 +0000"
+#. summary(texlive-specs-t:texlive-sageep)
+msgid "Format papers for the annual meeting of EEGS"
msgstr ""
-#. description(xmldb-api:xmldb-api-sdk)
+#. description(texlive-specs-t:texlive-sageep)
msgid ""
-"The reference implementation provides a very simple file system based implementation of the XML:DB API. This provides what is basically a very simple native XML database that uses directories to represent collections and just stores the XML in files.\n"
+"The class provides formatting for papers for the annual meeting of the Environmental and Engineering Geophysical Society (EEGS) (\"Application of Geophysics to Engineering and Environmental Problems\", known as SAGEEP).\n"
"\n"
-"The driver development kit provides a set of base classes that can be extended to simplify and speed the development of XML:DB API drivers. These classes are used to provide the basis for the reference implementation and therefore a simple example of how a driver can be implemented. Using the SDK classes significantly reduces the amount of code that must be written to create a new driver.\n"
-"\n"
-"Along with the SDK base classes the SDK also contains a set of jUnit test cases that can be used to help validate the driver while it is being developed. The test cases are still in development but there are enough tests currently to be useful."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-refstyle)
-msgid ""
-"The refstyle provides a consistent way of producing references throughout a project. Enough flexibility is provided to make local changes to a single reference. The user can configure their own setup. refstyle has a direct interface to varioref, and namerefs from the nameref package can easily be incorporated (if needed). For large projects such as a series of books or a multi volume thesis, written as freestanding documents, a facility is provided to interface to the xr package for external document references.\n"
-"\n"
-"date: 2010-11-03 14:55:25 +0000"
+#. summary(texlive-specs-t:texlive-sageep-doc)
+#, fuzzy
+msgid "Documentation for texlive-sageep"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-sageep-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sageep"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sanskrit)
+msgid "Sanskrit support"
msgstr ""
-#. description(texlive-mathmode)
+#. description(texlive-specs-t:texlive-sanskrit)
msgid ""
-"The review includes: Standard LaTeX mathematics mode; AMSmath; TeX and mathematics; Other packages; Tuning math typesetting; Mathematics fonts; Special symbols; Examples; and Lists, bibliography and index.\n"
+"A font and pre-processor suitable for the production of documents written in Sanskrit. Type 1 versions of the fonts are available.\n"
"\n"
-"date: 2010-12-14 14:27:20 +0000"
+"date: 2014-05-07 21:23:47 +0000"
msgstr ""
-#. description(texlive-revtex4)
-msgid "The revtex4 package"
+#. summary(texlive-specs-t:texlive-sanskrit-doc)
+#, fuzzy
+msgid "Documentation for texlive-sanskrit"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-sanskrit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sanskrit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sanskrit-fonts)
+msgid "Severed fonts for texlive-sanskrit"
msgstr ""
-#. description(texlive-rjlparshap)
-msgid "The rjlparshap package"
+#. description(texlive-specs-t:texlive-sanskrit-fonts)
+msgid "The separated fonts package for texlive-sanskrit"
msgstr ""
-#. description(texlive-roex)
-msgid "The roex package"
+#. summary(texlive-specs-t:texlive-sansmath)
+msgid "Maths in a sans font"
msgstr ""
-#. description(texlive-romannum)
+#. description(texlive-specs-t:texlive-sansmath)
msgid ""
-"The romannum package changes LaTeX generated numbers to be printed with roman numerals instead of arabic digits. It requires the stdclsdv package. Users of the bookhands fonts may find this package useful.\n"
+"The package defines a new math version sans, and a command \\sansmath that behaves somewhat like \\boldmath\n"
"\n"
-"date: 2009-09-03 11:00:14 +0000"
+"date: 2012-06-04 18:50:45 +0000"
msgstr ""
-#. description(texlive-rotpages)
-msgid ""
-"The rotpages package allows you to format documents where small sets of pages are rotated by 180 degrees and rearranged, so that they can be read by turning the printed copy upside-down. It was primarly meant for collecting exercises and solutions: using the package, you can print the exercise text normally and the solutions rotated.\n"
-"\n"
-"date: 2007-01-14 09:43:12 +0000"
+#. summary(texlive-specs-t:texlive-sansmath-doc)
+#, fuzzy
+msgid "Documentation for texlive-sansmath"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-sansmath-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sansmath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sansmathaccent)
+#. summary(texlive-specs-t:texlive-sansmathfonts)
+msgid "Correct placement of accents in sans-serif maths"
msgstr ""
-#. description(texlive-rsc)
+#. description(texlive-specs-t:texlive-sansmathaccent)
msgid ""
-"The rsc package provides a BibTeX style in accordance with the requirements of the Royal Society of Chemistry. It was originally based on the file pccp.bst, but also implements a number of styles from the achemso package. The package is now a stub for the chemstyle package, which the author developed to unify the writing of articles with a chemistry content.\n"
+"Sans serif maths (produced by the beamer class or the sfmath package) often has accents positioned incorrectly. The package fixes the positioning of such accents when the default font (cmssi) is used for sans serif maths.\n"
"\n"
-"date: 2011-01-04 23:05:34 +0000"
+"date: 2014-05-07 21:23:47 +0000"
msgstr ""
-#. description(texlive-rtkinenc)
+#. summary(texlive-specs-t:texlive-sansmathaccent-doc)
+#, fuzzy
+msgid "Documentation for texlive-sansmathaccent"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-sansmathaccent-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sansmathaccent"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. description(texlive-specs-t:texlive-sansmathfonts)
msgid ""
-"The rtkinenc package is functionally similar to the standard LaTeX package inputenc: both set up active characters so that an input character outside the range of 7-bit visible ASCII is coverted into one or more corresponding LaTeX commands. The main difference lies in that rtkinenc allows the user to specify a fallback procedure to use when the text command corresponding to some input character isn't available. Names of commands in rtkinenc have been selected so that it can read inputenc encoding definition files, and the aim is that rtkinenc should be backwards compatible with inputenc. rtkinenc is not a new version of inputenc though, nor is it part of standard LaTeX. For an example of how rtkinenc is used, the user may look at the tclldoc class.\n"
+"Sans serifsmall caps and math fonts for use with Computer Modern.\n"
"\n"
-"date: 2010-10-04 09:23:12 +0000"
+"date: 2014-05-07 21:23:47 +0000"
msgstr ""
-#. description(texlive-stex)
-msgid ""
-"The sTeX package collection is a version of TeX/LaTeX that allows to markup TeX/LaTeX documents semantically without leaving the document format, essentially turning it into a document format for mathematical knowledge management (MKM).\n"
-"\n"
-"date: 2012-03-31 09:15:31 +0000"
+#. summary(texlive-specs-t:texlive-sansmathfonts-doc)
+msgid "Documentation for texlive-sansmathfonts"
msgstr ""
-#. description(texlive-pst2pdf)
-msgid ""
-"The script extracts the preamble of the document and runs all \\begin{postscript}...\\end{postscript} \\begin{pspicture}...\\end{pspicture} and \\pspicture...\\endpspicture separately through LaTeX with the same preamble as the original document; thus it creates EPS, PNG and PDF files of these snippets. In a final PDFLaTeX run the script replaces the environments with \\includegraphics to include the processed snippets. Detail documentation is acquired from the document itself via Perldoc.\n"
-"\n"
-"date: 2013-03-10 14:10:17 +0000"
+#. description(texlive-specs-t:texlive-sansmathfonts-doc)
+msgid "This package includes the documentation for texlive-sansmathfonts"
msgstr ""
-#. description(texlive-serbian-def-cyr)
-msgid "The serbian-def-cyr package"
+#. summary(texlive-specs-t:texlive-sansmathfonts-fonts)
+msgid "Severed fonts for texlive-sansmathfonts"
msgstr ""
-#. description(texlive-piff)
-msgid ""
-"The set consists (now) of: - a small package for dealing with duplicate-numbered output pages; - newproof, for defining mathematical proof structures; - onepagem for omitting the page number in one-page documents and - time, which prints a 12-hour format time.\n"
-"\n"
-"date: 2010-12-08 07:17:08 +0000"
+#. description(texlive-specs-t:texlive-sansmathfonts-fonts)
+msgid "The separated fonts package for texlive-sansmathfonts"
msgstr ""
-#. summary(texlive-skaknew)
-msgid "The skak chess fonts redone in Adobe Type 1"
+#. summary(texlive-specs-t:texlive-sapthesis)
+msgid "Typeset theses for Sapienza-University, Rome"
msgstr ""
-#. description(texlive-snapshot)
+#. description(texlive-specs-t:texlive-sapthesis)
msgid ""
-"The snapshot package helps the owner of a LaTeX document obtain a list of the external dependencies of the document, in a form that can be embedded at the top of the document. It provides a snapshot of the current processing context of the document, insofar as it can be determined from inside LaTeX. If a document contains such a dependency list, then it becomes possible to arrange that the document be processed always with the same versions of everything, in order to ensure the same output. This could be useful for someone wanting to keep a LaTeX document on hand and consistently reproduce an identical DVI file from it, on the fly; or for someone wanting to shield a document during the final stages of its production cycle from unexpected side effects of routine upgrades to the TeX system.\n"
+"The class will typeset Ph.D., Master, and Bachelor theses that adhere to the publishing guidelines of the Sapienza-University of Rome.\n"
"\n"
-"date: 2006-12-13 23:03:18 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lshort-bulgarian)
+#. summary(texlive-specs-t:texlive-sapthesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-sapthesis"
+msgstr "Dokumentace pro gawk"
+
+#. description(texlive-specs-t:texlive-sapthesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sapthesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sasnrdisplay)
+msgid "Typeset SAS or R code or output"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-sasnrdisplay)
msgid ""
-"The source files, PostScript and PDF files of the Bulgarian translation of the \"Short Introduction to LaTeX 2e\".\n"
+"The SASnRdisplay package serves as a front-end to the listings, which permits statisticians and others to import source code, and the results of their calculations or simulations into LaTeX projects. The package is also capable of overloading the Sweave and SASweave packages.\n"
"\n"
-"date: 2007-12-21 18:41:24 +0000"
+"date: 2014-03-07 11:39:33 +0000"
msgstr ""
-#. description(texlive-latex-graphics-companion)
+#. summary(texlive-specs-t:texlive-sasnrdisplay-doc)
+#, fuzzy
+msgid "Documentation for texlive-sasnrdisplay"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-sasnrdisplay-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sasnrdisplay"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sauerj)
+msgid "A bundle of utilities by Jonathan Sauer"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-sauerj)
msgid ""
-"The source of the examples printed in the book, together with necessary supporting files.\n"
+"The bundle consists of: a tool for collecting text for later re-use, a tool for typesetting the \"meta-information\" within a text, a tool for use in constructing macros with multiple optional parameters, a package for multiple column parallel texts, a tool for processing key-value structured lists, and macros for typesetting a number as a German-language string.\n"
"\n"
-"date: 2012-05-22 09:10:15 +0000"
+"date: 2014-01-13 13:46:40 +0000"
msgstr ""
-#. description(texlive-latex-web-companion)
+#. summary(texlive-specs-t:texlive-sauerj-doc)
+#, fuzzy
+msgid "Documentation for texlive-sauerj"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-sauerj-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sauerj"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sauter)
+msgid "Wide range of design sizes for CM fonts"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-sauter)
msgid ""
-"The source of the examples printed in the book, together with necessary supporting files.\n"
+"Extensions, originally to the CM fonts, providing a parameterization scheme to build Metafont fonts at true design sizes, for a large range of sizes. The scheme has now been extended to a range of other fonts, including the AMS fonts, bbm, bbold, rsfs and wasy fonts.\n"
"\n"
-"date: 2012-07-10 06:38:43 +0000"
+"date: 2014-05-07 23:33:09 +0000"
msgstr ""
-#. description(texlive-tlc2)
+#. summary(texlive-specs-t:texlive-sauterfonts)
+#, fuzzy
+msgid "Use Sauter's fonts in LaTeX"
+msgstr "Zpracování témat pro GTK+"
+
+#. description(texlive-specs-t:texlive-sauterfonts)
msgid ""
-"The source of the examples printed in the book, together with necessary supporting files. The book was published by Addison- Wesley, 2004, ISBN 0-201-36299-6.\n"
+"The package provides font definition files (plus a replacement for the package exscale) to access many of the fonts in Sauter's collection. These fonts are available in all point sizes and look nicer for such \"intermediate\" document sizes as 11pt. Also included is the package sbbm, an alternative to access the bbm fonts.\n"
"\n"
-"date: 2010-10-24 14:46:02 +0000"
+"date: 2012-06-04 18:50:45 +0000"
msgstr ""
-#. description(texlive-spath3)
+#. summary(texlive-specs-t:texlive-sauterfonts-doc)
+#, fuzzy
+msgid "Documentation for texlive-sauterfonts"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-sauterfonts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sauterfonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-savefnmark)
+msgid "Save name of the footnote mark for reuse"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-savefnmark)
msgid ""
-"The spath3 library provides methods for manipulating the \"soft paths\" of TikZ/PGF. Packaged with it are two TikZ libraries that make use of the methods provided. These are libraries for drawing calligraphic paths and for drawing knot diagrams.\n"
+"Sometimes the same footnote applies to more than one location in a table. With this package the mark of a footnote can be saved into a name, and re-used subsequently without creating another footnote at the bottom.\n"
"\n"
-"date: 2013-04-12 15:56:37 +0000"
+"date: 2012-06-05 11:25:49 +0000"
msgstr ""
-#. description(texlive-srbook-mem)
-msgid "The srbook-mem package"
+#. summary(texlive-specs-t:texlive-savefnmark-doc)
+#, fuzzy
+msgid "Documentation for texlive-savefnmark"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-savefnmark-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-savefnmark"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-savesym)
+msgid "Redefine symbols where names conflict"
msgstr ""
-#. description(texlive-stdclsdv)
+#. description(texlive-specs-t:texlive-savesym)
msgid ""
-"The stdclsdv package is designed for package writers who need to know what sectioning divsions are provided by the document's class. It also provides a version of \\CheckCommand that sets a flag rather than printing a warning.\n"
+"There are a number of symbols (e.g., \\Square) that are defined by several packages. In order to typeset all the variants in a document, we have to give the glyph a unique name. To do that, we define \\savesymbol{XXX}, which renames a symbol from \\XXX to \\origXXX, and \\restoresymbols{yyy}{XXX}, which renames \\origXXX back to \\XXX and defines a new command, \\yyyXXX, which corresponds to the most recently loaded version of \\XXX.\n"
"\n"
-"date: 2009-09-04 10:14:45 +0000"
+"date: 2013-09-02 16:12:33 +0000"
msgstr ""
-#. description(texlive-steinmetz)
+#. summary(texlive-specs-t:texlive-savetrees)
+#, fuzzy
+msgid "Optimise the use of each page of a LaTeX document"
+msgstr "Tento balík obsahuje správce oken KDE a ikony pro KDE."
+
+#. description(texlive-specs-t:texlive-savetrees)
msgid ""
-"The steinmetz package provides a command for typesetting complex numbers in the Steinmetz notation used in electrotechnics as: <modulus><argument or phase inside an angle symbol> The package makes use of pict2e.\n"
+"The goal of the savetrees package is to pack as much text as possible onto each page of a LaTeX document. Admittedly, this makes the document far less attractive. Nevertheless, savetrees is a simple way to save paper when printing draft copies of a document. It can also be useful when trying to meet a tight page-length requirement for a conference or journal submission. Most of the package options cover specific modifications to typesetting rules, but there are also options subtle, moderate and extreme options for the \"broad brush\" approach.\n"
"\n"
-"date: 2009-11-09 23:30:52 +0000"
+"date: 2013-04-11 10:10:47 +0000"
msgstr ""
-#. description(texlive-subfiles)
-msgid "The subfiles package"
+#. summary(texlive-specs-t:texlive-savetrees-doc)
+#, fuzzy
+msgid "Documentation for texlive-savetrees"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-savetrees-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-savetrees"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-scale)
+msgid "Scale document by sqrt(2) or magstep(2)"
msgstr ""
-#. description(texlive-substr)
+#. description(texlive-specs-t:texlive-scale)
msgid ""
-"The substr package provides commands to deal with substrings of strings. Macros are provided to: - determine if one string is a substring of another, - return the parts of a string before or after a substring and - count the number of occurrences of a substring.\n"
+"A package to scale a document by sqrt(2) (or by \\magstep{2}). This is useful if you are preparing a document on, for example, A5 paper and want to print on A4 paper to achieve a better resolution.\n"
"\n"
-"date: 2009-10-20 20:03:50 +0000"
+"date: 2012-06-05 11:25:49 +0000"
msgstr ""
-#. description(texlive-sudoku)
-msgid ""
-"The sudoku package provides an environment for typesetting sudoku grids. A sudoku puzzle is a 9x9 grid where some of the squares in the grid contain numbers. The rules are simple: every column can only contain the digits 1 to 9, every row can only contain the digits 1 to 9 and every 3x3 box can only contain the digits 1 to 9. More information, including help and example puzzles, can be found at sudoku.org.uk. This site also has blank sudoku grids (or worksheets), but you will not need to print them from there if you have this package installed.\n"
-"\n"
-"date: 2007-03-12 10:51:09 +0000"
+#. summary(texlive-specs-t:texlive-scale-doc)
+#, fuzzy
+msgid "Documentation for texlive-scale"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-scale-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-scale"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-scalebar)
+msgid "Create scalebars for maps, diagrams or photos"
msgstr ""
-#. description(texlive-svn)
+#. description(texlive-specs-t:texlive-scalebar)
msgid ""
-"The svn package lets you typeset (in LaTeX) the value of Subversion keywords. It is approximately an equivalent to the rcs package, but for Subversion rather than CVS. Details of Subversion (a replacement for CVS) is available from the project's home site.\n"
+"This is a small package to create scalebars for maps, diagrams or photos. It was designed for use with cave maps but can be used for anything from showing a scalebar in kilometres for topographic maps to a scalebar in micrometres for an electron microscope image.\n"
"\n"
-"date: 2009-03-04 18:42:30 +0000"
+"date: 2012-11-14 17:06:01 +0000"
msgstr ""
-#. description(texlive-synctex)
-msgid "The synctex package"
+#. summary(texlive-specs-t:texlive-scalebar-doc)
+#, fuzzy
+msgid "Documentation for texlive-scalebar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-scalebar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-scalebar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-scalerel)
+msgid "Constrained scaling and stretching of objects"
msgstr ""
-#. description(texlive-web)
+#. description(texlive-specs-t:texlive-scalerel)
msgid ""
-"The system processes 'web' files in two ways: firstly to rearrange them to produce compilable code (using the program tangle), and secondly to produce a TeX source (using the program weave) that may be typeset for comfortable reading.\n"
+"The package provides four commands for vertically scaling and stretching objects. Its primary function is the ability to scale/stretch and shift one object to conform to the size of a specified second object. This feature can be useful in both equations and schematic diagrams. Additionally, the scaling and stretching commands offer constraints on maximum width and/or minimum aspect ratio, which are often used to preserve legibility or for the sake of general appearance.\n"
"\n"
-"date: 2012-02-22 17:24:24 +0000"
+"date: 2014-03-10 13:38:12 +0000"
msgstr ""
-#. description(texlive-tabularborder)
-msgid ""
-"The tabular environment is changed so that the outer \\tabcolseps are compensated and a \\hline has the same length as the text. No @{} is needed.\n"
-"\n"
-"date: 2010-04-29 10:40:52 +0000"
+#. summary(texlive-specs-t:texlive-scalerel-doc)
+msgid "Documentation for texlive-scalerel"
msgstr ""
-#. description(texlive-talk)
+#. description(texlive-specs-t:texlive-scalerel-doc)
+msgid "This package includes the documentation for texlive-scalerel"
+msgstr ""
+
+#. summary(texlive-specs-t:texlive-scanpages)
+#, fuzzy
+msgid "Support importing and embellishing scanned documents"
+msgstr "Rozšíření Perlu pro psaní XML dokumentů"
+
+#. description(texlive-specs-t:texlive-scanpages)
msgid ""
-"The talk document class allows you to create slides for screen presentations or printing on transparencies. It also allows you to print personal notes for your talk. You can create overlays and display structure information (current section / subsection, table of contents) on your slides. The main feature that distinguishes talk from other presentation classes like beamer or prosper is that it allows the user to define an arbitrary number of slide styles and switch between these styles from slide to slide. This way the slide layout can be adapted to the slide content. For example, the title or contents page of a talk can be given a slightly different layout than the other slides. The talk class makes no restrictions on the slide design whatsoever. The entire look and feel of the presentation can be defined by the user. The style definitions should be put in a separate sty file. Currently the package comes with only one set of pre-defined slide styles (greybars.sty). Contributions f
rom people who are artistically more gifted than the author are more than welcome!\n"
+"The bundle provides support for the process of creating documents based on pre-TeX-era material that is available as scanned pages, only.\n"
"\n"
-"date: 2007-08-14 12:14:54 +0000"
+"date: 2014-05-15 17:06:58 +0000"
msgstr ""
-#. description(texlive-tcldoc)
+#. summary(texlive-specs-t:texlive-scanpages-doc)
+#, fuzzy
+msgid "Documentation for texlive-scanpages"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-scanpages-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-scanpages"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-schemabloc)
+msgid "Draw block diagrams, using Tikz"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-schemabloc)
msgid ""
-"The tclldoc package and class simplify the application of the doc/docstrip style of literate programming with Dr. John Ousterhout's Tool Command Language (Tcl, pronounced \"tickle\", a.k.a. The Cool Language). The tclldoc package is a bit like the doc package is for LaTeX, whereas the tclldoc class more parallels the ltxdoc class.\n"
+"The package provides a set of macros for constructing block diagrams, using TikZ.\n"
"\n"
-"date: 2007-02-27 23:02:05 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-termlist)
+#. summary(texlive-specs-t:texlive-schemabloc-doc)
+#, fuzzy
+msgid "Documentation for texlive-schemabloc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-schemabloc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-schemabloc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-schemata)
+msgid "Print topical diagrams"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-schemata)
msgid ""
-"The termlist package provides environments to indent and label any kind of terms with a continuous number. Candidate terms may appear inside an equation or eqnarray environment.\n"
+"The package facilitates the creation of topical schemata, outlines that use braces (or facsimiles thereof) to illustrate the breakdown of concepts and categories in Scholastic thought from late medieval and early modern periods.\n"
"\n"
-"date: 2010-06-12 12:14:46 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex-virtual-academy-pl)
-msgid "The tex-virtual-academy-pl package"
+#. summary(texlive-specs-t:texlive-schemata-doc)
+msgid "Documentation for texlive-schemata"
msgstr ""
-#. description(texlive-texconfig)
-msgid "The texconfig package"
+#. description(texlive-specs-t:texlive-schemata-doc)
+msgid "This package includes the documentation for texlive-schemata"
msgstr ""
-#. description(texlive-texlive-common)
-#, fuzzy
-msgid "The texlive-common package"
-msgstr "Balíčky pro vývoj KDE"
+#. summary(texlive-filesystem:texlive-scheme-basic)
+msgid "Basic scheme (plain and latex)"
+msgstr ""
-#. description(texlive-texlive-cz)
-msgid "The texlive-cz package"
+#. description(texlive-filesystem:texlive-scheme-basic)
+msgid "This is the basic TeX Live scheme: it is a small set of files sufficient to typeset plain TeX or LaTeX documents in PostScript or PDF, using the Computer Modern fonts. This scheme corresponds to collection-basic and collection-latex."
msgstr ""
-#. description(texlive-texlive-de)
-msgid "The texlive-de package"
+#. summary(texlive-filesystem:texlive-scheme-context)
+msgid "ConTeXt scheme"
msgstr ""
-#. description(texlive-texlive-en)
-msgid "The texlive-en package"
+#. description(texlive-filesystem:texlive-scheme-context)
+msgid "This is the TeX Live scheme for installing ConTeXt."
msgstr ""
-#. description(texlive-texlive-fr)
-msgid "The texlive-fr package"
+#. summary(texlive-filesystem:texlive-scheme-full)
+msgid "Full scheme (everything)"
msgstr ""
-#. description(texlive-texlive-it)
-msgid "The texlive-it package"
+#. description(texlive-filesystem:texlive-scheme-full)
+msgid "This is the full TeX Live scheme: it installs everything available."
msgstr ""
-#. description(texlive-texlive-pl)
-msgid "The texlive-pl package"
+#. summary(texlive-filesystem:texlive-scheme-gust)
+msgid "GUST TeX Live scheme"
msgstr ""
-#. description(texlive-texlive-ru)
-msgid "The texlive-ru package"
+#. description(texlive-filesystem:texlive-scheme-gust)
+msgid "This is the GUST TeX Live scheme: it is a set of files sufficient to typeset Polish plain TeX, LaTeX and ConTeXt documents in PostScript or PDF."
msgstr ""
-#. description(texlive-texlive-sr)
-msgid "The texlive-sr package"
+#. summary(texlive-filesystem:texlive-scheme-medium)
+msgid "Medium scheme (small + more packages and languages)"
msgstr ""
-#. description(texlive-texlive-zh-cn)
-msgid "The texlive-zh-cn package"
+#. description(texlive-filesystem:texlive-scheme-medium)
+msgid "This is the medium TeX Live collection: it contains plain TeX, LaTeX, many recommended packages, and support for most European languages."
msgstr ""
-#. description(texlive-textcase)
-msgid ""
-"The textcase package offers commands \\MakeTextUppercase and \\MakeTextLowercase are similar to the standard \\MakeUppercase and \\MakeLowercase, but they do not change the case of any sections of mathematics, or the arguments of \\cite, \\label and \\ref commands within the argument. A further command \\NoCaseChange does nothing but suppress case change within its argument, so to force uppercase of a section including an environment, one might say: \\MakeTextUppercase{...\\NoCaseChange{\\begin{foo}} ...\\NoCaseChange{\\end{foo}}...}\n"
-"\n"
-"date: 2007-03-01 11:49:13 +0000"
+#. summary(texlive-filesystem:texlive-scheme-minimal)
+msgid "Minimal scheme (plain only)"
msgstr ""
-#. description(texlive-textglos)
-msgid "The textglos package"
+#. description(texlive-filesystem:texlive-scheme-minimal)
+msgid "This is the minimal TeX Live scheme, with support for only plain TeX. (No LaTeX macros.) LuaTeX is included because Lua scripts are used in TeX Live infrastructure. This scheme corresponds exactly to collection-basic."
msgstr ""
-#. description(texlive-theoremref)
-msgid ""
-"The theoremref package provides variants of the \\label and \\ref commands for theorem-like environments, capable of automatically typesetting references including the theorem name (apart from the theorem number). The scheme is particularly valuable if the author decides to change a lemma to a proposition or a theorem (or whatever).\n"
-"\n"
-"date: 2012-07-10 13:51:55 +0000"
+#. summary(texlive-filesystem:texlive-scheme-small)
+msgid "Small scheme (basic + xetex, metapost, a few languages)"
msgstr ""
-#. description(texlive-tikzmark)
-msgid ""
-"The tikzmark package defines a command to \"remember\" a position on a page for later (or earlier) use, primarily (but not exclusively) with TikZ.\n"
-"\n"
-"date: 2013-04-17 09:11:14 +0000"
+#. description(texlive-filesystem:texlive-scheme-small)
+msgid "This is a small TeX Live scheme, corresponding to MacTeX's BasicTeX variant. It adds XeTeX, MetaPost, various hyphenations, and some recommended packages to scheme-basic."
msgstr ""
-#. description(texlive-titling)
-msgid ""
-"The titling package provides control over the typesetting of the \\maketitle command and \\thanks commands, and makes the \\title, \\author and \\date information permanently available. Multiple titles are allowed in a single document. New titling elements can be added and a titlepage title can be centered on a physical page.\n"
-"\n"
-"date: 2009-09-04 10:14:45 +0000"
+#. summary(texlive-filesystem:texlive-scheme-tetex)
+msgid "TeTeX scheme (more than medium, but nowhere near full)"
msgstr ""
-#. description(texlive-tkz-euclide)
-msgid ""
-"The tkz-euclide package is tis a set of files, designed to give math teachers and students) easy access at the programmation of euclidean geometry with TikZ.\n"
-"\n"
-"date: 2011-06-05 21:10:23 +0000"
+#. description(texlive-filesystem:texlive-scheme-tetex)
+msgid "TeX Live scheme nearly equivalent to the teTeX distribution that was maintained by Thomas Esser."
msgstr ""
-#. description(texlive-tkz-fct)
-msgid ""
-"The tkz-fct package is designed to give math teachers (and students) easy access at the programmation of graphs of functions with TikZ and gnuplot.\n"
-"\n"
-"date: 2011-06-05 21:10:23 +0000"
+#. summary(texlive-filesystem:texlive-scheme-xml)
+msgid "XML scheme"
msgstr ""
-#. description(texlive-topfloat)
-msgid ""
-"The topfloat package\n"
-"\n"
-"date: 2007-01-17 09:01:14 +0000"
+#. description(texlive-filesystem:texlive-scheme-xml)
+msgid "This contains the things you need to do XML-related work, including PassiveTeX, JadeTeX, ConTeXt and Omega."
msgstr ""
-#. description(translate-toolkit:translate-toolkit-devel-doc)
-msgid "The translate-toolkit-devel-doc package contains Translate Toolkit API documentation for developers wishing to build new tools for the toolkit or to use the libraries in other localization tools."
+#. summary(texlive-specs-t:texlive-schule)
+msgid "Improved support for teaching technical subjects"
msgstr ""
-#. description(texlive-trivfloat)
+#. description(texlive-specs-t:texlive-schule)
msgid ""
-"The trivfloat package provides a quick method for defining new float types in LaTeX. A single command sets up a new float in the same style as the LaTeX kernel figure and table float types. The package works with memoir as well as the standard classes.\n"
+"The bundle provides packages and commands that may be useful in the context of work at schools. At the moment, the emphasis is on IT classes; features for physics classes are being added; features for other school class subjects are solicited. At the moment, the bundle comprises packages for IT classes (including syntax diagrams, structure charts, sequence diagrams, object diagrams, and class diagrams), as well as classes for preparing written exams.\n"
"\n"
-"date: 2009-04-24 11:36:42 +0000"
+"date: 2014-05-22 10:56:12 +0000"
msgstr ""
-#. description(texlive-ttfutils)
+#. summary(texlive-specs-t:texlive-schule-doc)
#, fuzzy
-msgid "The ttfutils package"
-msgstr "dosutils CD dir - interní balíček."
+msgid "Documentation for texlive-schule"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tugboat-plain)
-msgid "The tugboat-plain package"
+#. description(texlive-specs-t:texlive-schule-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-schule"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-schulschriften)
+msgid "German \"school scripts\" from Suetterlin to the present day"
msgstr ""
-#. description(tuned)
-msgid "The tuned package contains a daemon that tunes system settings dynamically. It does so by monitoring the usage of several system components periodically. Based on that information components will then be put into lower or higher power saving modes to adapt to the current usage. Currently only ethernet network and ATA harddisk devices are implemented."
+#. description(texlive-specs-t:texlive-schulschriften)
+msgid ""
+"Das Paket enthalt im wesentlichen die METAFONT-Quellfiles fur die folgenden Schulausgangsschriften: Suetterlinschrift, Deutsche Normalschrift, Lateinische Ausgangsschrift, Schulausgangsschrift, Vereinfachte Ausgangsschrift. Damit ist es moglich, beliebige deutsche Texte in diesen Schreibschriften zu schreiben.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-uni-wtal-ger)
-msgid "The uni-wtal-ger package"
+#. summary(texlive-specs-t:texlive-schulschriften-doc)
+msgid "Documentation for texlive-schulschriften"
msgstr ""
-#. description(texlive-upca)
-#, fuzzy
-#| msgid "Extra packages"
-msgid "The upca package"
-msgstr "Dodatečné balíčky"
-
-#. description(texlive-uri)
-msgid "The uri package"
+#. description(texlive-specs-t:texlive-schulschriften-doc)
+msgid "This package includes the documentation for texlive-schulschriften"
msgstr ""
-#. description(texlive-mylatexformat)
-msgid ""
-"The use of formats helps to speed up compilations: packages which have been dumped in the format are loaded at very high speed. This is useful when a document loads many packages (including large packages such as pgf-TikZ). The package was developed from the work in mylatex, and eliminates many of the limitations and problems of that package.\n"
-"\n"
-"date: 2011-02-13 00:21:30 +0000"
+#. summary(texlive-specs-t:texlive-schwalbe-chess)
+msgid "Typeset the German chess magazine \"Die Schwalbe\""
msgstr ""
-#. description(texlive-stellenbosch)
+#. description(texlive-specs-t:texlive-schwalbe-chess)
msgid ""
-"The usthesis class/style files are provided to typeset reports, theses and dissertations that conform to the requirements of the Engineering Faculty of the University of Stellenbosch. The class file usthesis.cls is based on the standard LaTeX book class, while usthesis.sty is a style file to be loaded on top of the very powerful memoir class. Both options give identical output, but the benefit of the using memoir is that it has many additional command and environments for formatting and processing of a document. Usthesis is primarily concerned with the formatting of the front matter such as the title page, abstract, etc. and a decent page layout on A4 paper. It also works together with the babel package to provide language options to typeset documents in Afrikaans or in English. Additional packages are provided for bibliographic matter, note title pages, lists of symbols, as well as various graphic files for logos.\n"
+"The package is based on chess-problem-diagrams, which in its turn has a dependency on the bartel-chess-fonts\n"
"\n"
-"date: 2012-02-23 15:44:15 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-utf8mex)
-msgid "The utf8mex package"
-msgstr ""
+#. summary(texlive-specs-t:texlive-schwalbe-chess-doc)
+#, fuzzy
+msgid "Documentation for texlive-schwalbe-chess"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-uwthesis)
-msgid ""
-"The uwthesis package\n"
-"\n"
-"date: 2010-01-23 10:08:54 +0000"
+#. description(texlive-specs-t:texlive-schwalbe-chess-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-schwalbe-chess"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sciposter)
+msgid "Make posters of ISO A3 size and larger"
msgstr ""
-#. description(texlive-varwidth)
+#. description(texlive-specs-t:texlive-sciposter)
msgid ""
-"The varwidth environment is superficially similar to minipage, but the specified width is just a maximum value -- the box may get a narrower \"natural\" width.\n"
+"This collection of files contains LaTeX packages for posters of ISO A3 size and larger (ISO A0 is the default size). American paper sizes and custom paper are supported. In particular, sciposter.cls defines a document class which allows cutting and pasting most of an article to a poster without any editing (save reducing the size) -- see the manual. Sciposter does work for LaTeX, not just pdfLaTeX. However, xdvi produces strange results, though a recent version of dvips does create good ps- files from the dvi files. Also note that logos must either be put in the current working directory or in the directories of your LaTeX distribution. For some reason graphicspath settings are ignored.\n"
"\n"
-"date: 2010-11-26 11:00:18 +0000"
+"date: 2012-06-05 11:25:49 +0000"
msgstr ""
-#. description(texlive-vlna)
+#. summary(texlive-specs-t:texlive-sciposter-doc)
#, fuzzy
-#| msgid "Extra packages"
-msgid "The vlna package"
-msgstr "Dodatečné balíčky"
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-sciposter"
+msgstr "Dokumentace pro castor"
-#. description(texlive-vntex)
+#. description(texlive-specs-t:texlive-sciposter-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sciposter"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-screenplay)
+msgid "A class file to typeset screenplays"
+msgstr ""
+
+#. description(texlive-specs-t:texlive-screenplay)
msgid ""
-"The vntex bundle provides fonts, Plain TeX, texinfo and LaTeX macros for typesetting documents in Vietnamese. Users of the fonts (in both Metafont and Adobe Type 1 format) of this bundle may alternatively use the lm fonts bundle, for which map files are available to provide a Vietnamese version.\n"
+"The class implements the format recommended by the Academy of Motion Picture Arts and Sciences.\n"
"\n"
-"date: 2013-05-19 12:33:40 +0000"
+"date: 2012-07-03 22:53:20 +0000"
msgstr ""
-#. description(texlive-voss-de)
-msgid "The voss-de package"
-msgstr ""
+#. summary(texlive-specs-t:texlive-screenplay-doc)
+#, fuzzy
+msgid "Documentation for texlive-screenplay"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-wasy)
-msgid "The wasy fonts (Waldi symbol fonts)"
-msgstr ""
+#. description(texlive-specs-t:texlive-screenplay-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-screenplay"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xbmc)
-msgid "The xbmc package"
+#. summary(texlive-specs-t:texlive-scrjrnl)
+msgid "Typeset diaries or journals"
msgstr ""
-#. description(texlive-xetexko)
-msgid "The xetexko package"
+#. description(texlive-specs-t:texlive-scrjrnl)
+msgid ""
+"A class, based on scrbook, designed for typesetting diaries, journals or devotionals.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xpunctuate)
-msgid "The xpunctuate package"
+#. summary(texlive-specs-t:texlive-scrjrnl-doc)
+msgid "Documentation for texlive-scrjrnl"
msgstr ""
-#. description(texlive-xypic)
-msgid "The xypic package"
+#. description(texlive-specs-t:texlive-scrjrnl-doc)
+msgid "This package includes the documentation for texlive-scrjrnl"
msgstr ""
-#. description(texlive-xypic-tut-pt)
-msgid ""
-"The xypic-tut-pt package\n"
-"\n"
-"date: 2007-03-01 22:46:20 +0000"
+#. summary(texlive-specs-t:texlive-sdrt)
+msgid "Macros for Segmented Discourse Representation Theory"
msgstr ""
-#. description(texlive-yhmath)
+#. description(texlive-specs-t:texlive-sdrt)
msgid ""
-"The yhmath bundle contains fonts (type in 1 format) and a LaTeX package for using them.\n"
+"The package provides macros to produce the 'Box notation' of SDRT (and DRT), to draw trees representing discourse relations, and finally to have an easy access to various mathematical symbols used in that theory, mostly with automatic mathematics mode, so they work the same in formulae and in text.\n"
"\n"
-"date: 2007-03-01 22:46:20 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-zxjafbfont)
-msgid "The zxjafbfont package"
-msgstr ""
+#. summary(texlive-specs-t:texlive-sdrt-doc)
+#, fuzzy
+msgid "Documentation for texlive-sdrt"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-zxjafont)
-msgid ""
-"The zxjafont package\n"
-"\n"
-"date: 2013-04-25 15:40:06 +0000"
+#. description(texlive-specs-t:texlive-sdrt-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sdrt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-secdot)
+msgid "Section numbers with trailing dots"
msgstr ""
-#. description(texlive-zxjatype)
+#. description(texlive-specs-t:texlive-secdot)
msgid ""
-"The zxjatype package\n"
+"Makes the numbers of \\section commands come out with a trailing dot. Includes a command whereby the same can be made to happen with other sectioning commands.\n"
"\n"
-"date: 2012-12-15 18:00:17 +0000"
+"date: 2012-06-13 13:07:38 +0000"
msgstr ""
-#. summary(thessalonica-theano-fonts:thessalonica-theano-ttf-fonts)
-msgid "Theano Classical Fonts (TrueType Format)"
+#. summary(texlive-specs-t:texlive-secdot-doc)
+#, fuzzy
+msgid "Documentation for texlive-secdot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-secdot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-secdot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-section)
+msgid "Modifying section commands in LaTeX"
msgstr ""
-#. description(thessalonica-theano-fonts:thessalonica-theano-ttf-fonts)
+#. description(texlive-specs-t:texlive-section)
msgid ""
-"Theano Classical Fonts include three fonts listed below. Each font is currently available just in one weight/shape (regular) and contains Latin, Greek and Cyrillic letters.\n"
+"The package implements a pretty extensive scheme to make more manageable the business of configuring LaTeX output.\n"
"\n"
-"Theano Didot. A classicist face, with both its Roman and Greek parts implemented in Didot style. Unlike Old Standard, this font is designed from French sources.\n"
-"\n"
-"Theano Modern. A font with Greek letters designed in the Porsonic style. Unlike most modern implementation, it is based on Figgins Pica No. 3 / Small Pica No. 2 — probably the most successful and once the most popular Greek face of a Porsonic origin — rather than on later Monotype's design. The accompanying Latin font is implemented in the Modern style and modelled after English Modern faces of later 19th century, often used alonglide with Porsonic Greek types.\n"
-"\n"
-"Theano Old Style. A modernized \"Old Style\" Greek font with a large number of historic ligatures and alternate forms, modelled after some early 19th century types designed by Figgins' type foundry. It is accompanied by a Latin face based on some \"Old Style\" Roman fonts of the late 19th and early 20th century.\n"
-"\n"
-"This package contains fonts in TrueType format."
+"date: 2012-06-13 13:07:38 +0000"
msgstr ""
-#. summary(texlive-shadethm)
-msgid "Theorem environments that are shaded"
+#. summary(texlive-specs-t:texlive-section-doc)
+#, fuzzy
+msgid "Documentation for texlive-section"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-section-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-section"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sectionbox)
+msgid "Create fancy boxed ((sub)sub)sections"
msgstr ""
-#. description(texlive-unitsdef)
+#. description(texlive-specs-t:texlive-sectionbox)
msgid ""
-"There are a lot of packages for typesetting units in LaTeX2e. Some define macros to typeset a lot of units but do not suit to the actual font settings, some make the characters needed available but do not predefine any unit. This package tries to comply with both requirements. It predefines common units, defines an easy to use interface to define new units and changes the output concerning to the surrounding font settings.\n"
+"Sectionbox is a LaTeX package for putting fancy colored boxes around sections, subsections, and subsubsections, especially for use in posters, etc. It was designed with the sciposter class in mind, and certainly works with that class and with derived classes.\n"
"\n"
-"date: 2007-01-20 14:20:16 +0000"
+"date: 2012-06-13 13:07:38 +0000"
msgstr ""
-#. description(texlive-savesym)
-msgid ""
-"There are a number of symbols (e.g., \\Square) that are defined by several packages. In order to typeset all the variants in a document, we have to give the glyph a unique name. To do that, we define \\savesymbol{XXX}, which renames a symbol from \\XXX to \\origXXX, and \\restoresymbols{yyy}{XXX}, which renames \\origXXX back to \\XXX and defines a new command, \\yyyXXX, which corresponds to the most recently loaded version of \\XXX.\n"
-"\n"
-"date: 2007-01-14 14:20:52 +0000"
+#. summary(texlive-specs-t:texlive-sectionbox-doc)
+#, fuzzy
+msgid "Documentation for texlive-sectionbox"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-sectionbox-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sectionbox"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-sectsty)
+msgid "Control sectional headers"
msgstr ""
-#. description(texlive-metapost-examples)
+#. description(texlive-specs-t:texlive-sectsty)
msgid ""
-"These are a few (hundred) example pictures drawn with MetaPost, ranging from very simple (lines and circles) to rather intricate (uncommon geometric transformations, fractals, bitmap, etc).\n"
+"A LaTeX2e package to help change the style of any or all of LaTeX's sectional headers in the article, book, or report classes. Examples include the addition of rules above or below a section title.\n"
"\n"
-"date: 2008-04-20 17:53:04 +0000"
+"date: 2012-06-13 13:07:38 +0000"
msgstr ""
-#. description(texlive-wadalab)
-msgid ""
-"These are font bundles for the Japanese Wadalab fonts which work with the CJK package. All subfonts now have glyph names compliant to the Adobe Glyph List, making ToUnicode CMaps in PDF documents (created automatically by dvipdfmx) work correctly. All font bundles now contain virtual Unicode subfonts.\n"
-"\n"
-"date: 2011-05-21 11:20:15 +0000"
+#. summary(texlive-specs-t:texlive-sectsty-doc)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-sectsty"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-t:texlive-sectsty-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sectsty"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-seealso)
+msgid "Improve the performance of \\see macros with makeindex"
msgstr ""
-#. description(texlive-musixtex-fonts)
+#. description(texlive-specs-t:texlive-seealso)
msgid ""
-"These are fonts for use with MusixTeX; they are provided both as original Metafont source, and as converted Adobe Type 1. The bundle renders the older (Type 1 fonts only) bundle musixtex- t1fonts obsolete.\n"
+"The package amends the \\see and \\seealso macros that are used in building indexes with makeindex, to deal with repetitions, and to ensure page numbers are present in the actual index entries. on these indirecty\n"
"\n"
-"date: 2013-01-24 15:57:55 +0000"
+"date: 2014-04-25 09:20:11 +0000"
msgstr ""
-#. description(texlive-zhmetrics)
+#. summary(texlive-specs-t:texlive-seealso-doc)
+#, fuzzy
+msgid "Documentation for texlive-seealso"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-seealso-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-seealso"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-seetexk)
+#, fuzzy
+#| msgid "Utilities for Manipulating Desktop Files"
+msgid "Utilities for manipulating DVI files"
+msgstr "Nástroje pro manipulaci s desktop soubory"
+
+#. description(texlive-specs-t:texlive-seetexk)
msgid ""
-"These are metrics to use existing Chinese TrueType fonts in workflows that use LaTeX & dvipdfmx, or pdfLaTeX. The fonts themselves are not included in the package. Six font families are supported: kai, song, lishu, fangsong, youyuan and hei. Two encodings (GBK and UTF-8) are supported.\n"
+"The collection comprises: dvibook, which will rearrange the pages of a DVI file into 'signatures' as used when printing a book; dviconcat, for concatenating pages of DVI file(s); dviselect, which will select pages from one DVI file to create a new DVI file; dvitodvi, which will rearrange the pages of a DVI file to create a new file; and libtex, a library for manipulating the files, from the old SeeTeX project. The utilities are provided as C source with Imakefiles, and an MS- DOS version of dvibook is also provided.\n"
"\n"
-"date: 2009-11-10 08:00:49 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pstricks-examples)
-msgid ""
-"These are the examples from the 6th edition of the book 'PSTricks -- Grafik fur TeX und LaTeX'.\n"
-"\n"
-"date: 2011-02-23 23:25:59 +0000"
+#. summary(texlive-specs-t:texlive-selectp)
+msgid "Select pages to be output"
msgstr ""
-#. description(texlive-pstricks-examples-en)
+#. description(texlive-specs-t:texlive-selectp)
msgid ""
-"These are the examples from the book 'PSTricks: Graphics and PostScript for TeX and LaTeX'.\n"
+"Defines a command \\outputonly, whose argument is a list of pages to be output. With the command present (before \\begin{document}), only those pages are output. This package was inspired by code published by Knuth in TUGboat 8(2) (July 1987).\n"
"\n"
-"date: 2012-04-05 15:28:29 +0000"
+"date: 2012-06-13 14:26:52 +0000"
msgstr ""
-#. description(texlive-wasy)
-msgid ""
-"These are the wasy (Waldi symbol) fonts, second release. This bundle presents the fonts in MetaFont format, but they are also available in Adobe Type 1 format. Support under LaTeX is provided by the wasysym package.\n"
-"\n"
-"date: 2006-09-12 06:29:26 +0000"
+#. summary(texlive-specs-t:texlive-selectp-doc)
+#, fuzzy
+msgid "Documentation for texlive-selectp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-selectp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-selectp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-selnolig)
+msgid "Selectively disable typographic ligatures"
msgstr ""
-#. description(texlive-uadocs)
+#. description(texlive-specs-t:texlive-selnolig)
msgid ""
-"These class files implement the house style of the University of Antwerp for course texts and master theses. Using these class files will make it easy for you to make and keep your documents compliant to this version and future versions of the house style of the University of Antwerp.\n"
+"The package suppresses typographic ligatures selectively, i.e., based on predefined search patterns. The search patterns focus on ligatures deemed inappropriate because they span morpheme boundaries. For example, the word shelfful, which is mentioned in the TeXbook as a word for which the ff ligature might be inappropriate, is automatically typeset as shelf\\/ful rather than as shel{ff}ul. For English and German language documents, the package provides extensive rules for the selective suppression of so-called \"common\" ligatures. These comprise the ff, fi, fl, ffi, and ffl ligatures as well as the ft and fft ligatures. Other f-ligatures, such as fb, fh, fj and fk, are suppressed globally, while exceptions are made for names and words of non-English/German origin, such as Kafka and fjord. For English language documents, the package further provides ligature suppression macros for a number of so-called \"discretionary\" or \"rare\" ligatures such as ct, st, and sp. The package requ
ires use of a recent LuaLaTeX format (for example TeXLive2012 or 2013, or MiKTeX2.9).\n"
"\n"
-"date: 2013-05-13 14:49:22 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-knuth)
-msgid ""
-"These files are details of problems reported in the 'Computers and Typesetting' series of books, for the Computer Modern fonts, and for TeX, MetaFont and related programs.\n"
-"\n"
-"date: 2012-06-11 18:26:30 +0000"
+#. summary(texlive-specs-t:texlive-selnolig-doc)
+msgid "Documentation for texlive-selnolig"
msgstr ""
-#. description(texlive-tipa)
-msgid ""
-"These fonts are considered the 'ultimate answer' to IPA typesetting. The encoding of these 8-bit fonts has been registered as LaTeX standard encoding T3, and the set of addendum symbols as encoding TS3. 'Times-like' Adobe Type 1 versions are provided for both the T3 and the TS3 fonts.\n"
-"\n"
-"date: 2012-01-30 09:59:21 +0000"
+#. description(texlive-specs-t:texlive-selnolig-doc)
+msgid "This package includes the documentation for texlive-selnolig"
msgstr ""
-#. description(texlive-levy)
+#. summary(texlive-specs-t:texlive-semantic)
+#, fuzzy
+#| msgid "Write Perl subroutines in other programming languages"
+msgid "Help for writing programming language semantics"
+msgstr "Nástroj pro psaní perlových rutin v jiných programovacích jazycích"
+
+#. description(texlive-specs-t:texlive-semantic)
msgid ""
-"These fonts are derivatives of Kunth's CM fonts. Macros for use with Plain TeX are included in the package; for use with LaTeX, see lgreek (with English documentation) or levy (with German documentation).\n"
+"Eases the typesetting of notation of semantics and compilers. Includes T-diagrams, various derivation symbols and inference trees.\n"
"\n"
-"date: 2011-03-16 11:04:55 +0000"
+"date: 2012-06-13 14:26:52 +0000"
msgstr ""
-#. description(texlive-semaphor)
-msgid ""
-"These fonts represent semaphore in a highly schematic, but very clear, fashion. The fonts are provided as MetaFont source, and in both OpenType and Adobe Type 1 formats.\n"
-"\n"
-"date: 2008-04-15 07:54:26 +0000"
+#. summary(texlive-specs-t:texlive-semantic-doc)
+#, fuzzy
+msgid "Documentation for texlive-semantic"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-semantic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-semantic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-semaphor)
+msgid "Semaphore alphabet font"
msgstr ""
-#. description(texlive-suanpan)
+#. description(texlive-specs-t:texlive-semaphor)
msgid ""
-"These macros are described in Denis Roegel: MetaPost macros for drawing Chinese and Japanese abaci, TUGboat (volume 30, number 1, 2009, pages 74-79)\n"
+"These fonts represent semaphore in a highly schematic, but very clear, fashion. The fonts are provided as Metafont source, and in both OpenType and Adobe Type 1 formats.\n"
"\n"
-"date: 2009-11-09 23:30:52 +0000"
+"date: 2012-06-13 14:26:52 +0000"
msgstr ""
-#. summary(texlive-ulthese)
-msgid "Thesis class and templates for Universite Laval"
-msgstr ""
+#. summary(texlive-specs-t:texlive-semaphor-doc)
+#, fuzzy
+msgid "Documentation for texlive-semaphor"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-uestcthesis)
-msgid "Thesis class for UESTC"
+#. description(texlive-specs-t:texlive-semaphor-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-semaphor"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-semaphor-fonts)
+msgid "Severed fonts for texlive-semaphor"
msgstr ""
-#. summary(texlive-tui)
-msgid "Thesis style for the University of the Andes, Colombia"
+#. description(texlive-specs-t:texlive-semaphor-fonts)
+msgid "The separated fonts package for texlive-semaphor"
msgstr ""
-#. summary(texlive-thuthesis)
-msgid "Thesis template for Tsinghua University"
+#. summary(texlive-specs-t:texlive-seminar)
+msgid "Make overhead slides"
msgstr ""
-#. description(texlive-robustindex)
+#. description(texlive-specs-t:texlive-seminar)
msgid ""
-"Third parties often change the page numbers without rerunning makeindex. One would like to make the page numbers in the index entries more robust. This bundle provides robustindex.sty and robustglossary.sty, which use the \\pageref mechanism to maintain correct page numbers\n"
+"A class that produces overhead slides (transparencies), with many facilities. The class requires availability of the fancybox package. Seminar is also the basis of other classes, such as prosper. In fact, seminar is not nowadays reckoned a good basis for a presentation -- users are advised to use more recent classes such as powerdot or beamer, both of which are tuned to 21st-century presentation styles. Note that the seminar distribution relies on the xcomment package, which was once part of the bundle, but now has a separate existence.\n"
"\n"
-"date: 2007-02-26 14:09:49 +0000"
+"date: 2014-05-14 14:12:10 +0000"
msgstr ""
-#. description(texlive-vancouver)
-msgid ""
-"This BibTeX style file is generated with the docstrip utility and modified manually to meet the Uniform Requirements for Manuscripts Submitted to Biomedical Journals as published in N Engl J Med 1997;336:309-315 (also known as the Vancouver style). The complete set of requirements may be viewed on the ICMJE web site.\n"
-"\n"
-"date: 2012-02-26 23:21:15 +0000"
+#. summary(texlive-specs-t:texlive-seminar-doc)
+#, fuzzy
+msgid "Documentation for texlive-seminar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-seminar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-seminar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-t:texlive-semioneside)
+msgid "Put only special contents on left-hand pages in two sided layout"
msgstr ""
-#. description(texlive-mentis)
+#. description(texlive-specs-t:texlive-semioneside)
msgid ""
-"This LaTeX class loads scrbook and provides changes necessary for publishing at Mentis publishers in Paderborn, Germany. It is not an official Mentis class, merely one developed by an author in close co-operation with Mentis.\n"
+"This package supports the preparation of semi one sided documents. That is, two sided documents, where all text is output on right-hand pages--as in a one-sided documents--and only special contents are output on left-hand pages on user request, e.g., floating objects.\n"
"\n"
-"date: 2007-01-09 21:36:10 +0000"
+"date: 2012-06-13 14:26:52 +0000"
msgstr ""
-#. description(texlive-tabvar)
-msgid ""
-"This LaTeX package is meant to ease the typesetting of tables showing variations of functions as they are used in France.\n"
-"\n"
-"date: 2013-01-22 16:38:01 +0000"
+#. summary(texlive-specs-t:texlive-semioneside-doc)
+#, fuzzy
+msgid "Documentation for texlive-semioneside"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-t:texlive-semioneside-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-semioneside"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sepfootnotes)
+msgid "Support footnotes and endnotes from separate files"
msgstr ""
-#. description(texlive-method)
+#. description(texlive-specs-u:texlive-sepfootnotes)
msgid ""
-"This LaTeX package supports the typesetting of programming language method and variable declarations. It includes an option to typeset in French.\n"
+"The package supports footnotes and endnotes from separate files. This is achieved with commands \\sepfootnotecontent and \\sepfootnote; the former defines the content of a note, while the latter typesets that note.\n"
"\n"
-"date: 2010-03-14 22:46:18 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-textpath)
-msgid ""
-"This MetaPost package provides macros to typeset text along a free path with the help of LaTeX, thereby preserving kerning and allowing for 8-bit input (accented characters).\n"
-"\n"
-"date: 2007-02-22 09:19:41 +0000"
+#. summary(texlive-specs-u:texlive-sepfootnotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-sepfootnotes"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sepfootnotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sepfootnotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sepnum)
+msgid "Print numbers in a \"friendly\" format"
msgstr ""
-#. description(texlive-pst-gr3d)
+#. description(texlive-specs-u:texlive-sepnum)
msgid ""
-"This PSTricks package provides a command \\PstGridThreeD that will draw a three dimensional grid, offering a number of options for its appearance.\n"
+"Provides a command to print a number with (potentially different) separators every three digits in the parts either side of the decimal point (the point itself is also configurable). The macro is fully expandable and not fragile (unless one of the separators is). There is also a command \\sepnumform, that may be used when defining \\the<counter> macros.\n"
"\n"
-"date: 2006-12-19 18:38:44 +0000"
+"date: 2012-06-13 14:26:52 +0000"
msgstr ""
-#. description(texlive-pst-lens)
-msgid ""
-"This PSTricks package provides a really rather simple command \\PstLens that will draw a lens. Command parameters provide a remarkable range of effects.\n"
-"\n"
-"date: 2007-06-15 08:24:12 +0000"
+#. summary(texlive-specs-u:texlive-sepnum-doc)
+#, fuzzy
+msgid "Documentation for texlive-sepnum"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sepnum-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sepnum"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-seqsplit)
+msgid "Split long sequences of characters in a neutral way"
msgstr ""
-#. description(texlive-pst-poly)
+#. description(texlive-specs-u:texlive-seqsplit)
msgid ""
-"This PSTricks package provides a really rather simple command \\PstPolygon that will draw various regular and non-regular polygons (according to command parameters); various shortcuts to commonly-used polygons are provided, as well as a command \\pspolygonbox that frames text with a polygon. The package uses the xkeyval package for argument decoding.\n"
+"When one needs to type long sequences of letters (such as in base-sequences in genes) or of numbers (such as calculations of transcendental numbers), there's no obvious break points to be found. The package provides a command \\seqsplit, which makes its argument splittable anywhere, and then leaves the TeX paragraph-maker to do the splitting. While the package may obviously be used to typeset DNA sequences, the user may consider the dnaseq as a rather more powerful alternative.\n"
"\n"
-"date: 2009-12-20 18:36:06 +0000"
+"date: 2012-06-17 11:30:22 +0000"
msgstr ""
-#. description(texlive-pst-slpe)
-msgid ""
-"This PStricks package covers all the colour gradient functionality of pst-grad (part of the base pstricks distribution), and provides the following facilities: - it permits the user to specify an arbitrary number of colours, along with the points at which they are to be reached; - it converts between RGB and HSV behind the scenes; - it provides concentric and radial gradients; - it provides a command \\psBall that generates bullets with a three-dimensional appearance; and - uses the xkeyval package for the extended key handling.\n"
-"\n"
-"date: 2011-10-25 18:39:05 +0000"
+#. summary(texlive-specs-u:texlive-seqsplit-doc)
+#, fuzzy
+msgid "Documentation for texlive-seqsplit"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-seqsplit-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-seqsplit"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-serbian-apostrophe)
+msgid "Commands for Serbian words with apostrophes"
msgstr ""
-#. description(texlive-repeatindex)
+#. description(texlive-specs-u:texlive-serbian-apostrophe)
msgid ""
-"This Package repeats item of an index if a page or column break occurs within a list of subitems. This helps to find out to which main item a subitem belongs.\n"
+"The package provides a collection of commands (whose names are Serbian words) whose expansion is the Serbian word with appropriate apostrophes.\n"
"\n"
-"date: 2011-06-16 19:20:53 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(wine:wine-devel-32bit)
-msgid "This RPM contains the header files and development tools for the WINE libraries."
-msgstr "Tento balík obsahuje statické knihovny a další soubory pořebné pro vývoj wine."
+#. summary(texlive-specs-u:texlive-serbian-apostrophe-doc)
+#, fuzzy
+msgid "Documentation for texlive-serbian-apostrophe"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-placeins-plain)
-msgid ""
-"This TeX file provides various mechanisms (for plain TeX and close relatives) to let insertions (footnotes, topins, pageins, etc.) float within their appropriate section, but to prevent them from intruding into the following section, even when sections do not normally begin a new page. (If your sections normally begin a new page, just use \\supereject to flush out insertions.)\n"
-"\n"
-"date: 2009-11-10 08:15:37 +0000"
+#. description(texlive-specs-u:texlive-serbian-apostrophe-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-serbian-apostrophe"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-serbian-date-lat)
+msgid "Updated date typesetting for Serbian"
msgstr ""
-#. description(texlive-linguex)
+#. description(texlive-specs-u:texlive-serbian-date-lat)
msgid ""
-"This bundle comprises two packages: - The linguex package facilitates the formatting of linguist examples, automatically taking care of example numbering, indentations, indexed brackets, and the '*' in grammaticality judgments. - The ps- trees package provides linguistic trees, building on the macros of tree-dvips, but overcoming some of the older package's shortcomings.\n"
+"Babel defines dates for Serbian texts, in Latin script. The style it uses does not match current practices. The present package defines a \\date command that solves the problem.\n"
"\n"
-"date: 2013-05-28 22:53:00 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-latex-referenz)
-msgid ""
-"This bundle contains all the examples, as source, eps and pdf, of the author's book \"LaTeX Referenz\" (2nd ed.), published by DANTE/Lehmanns. The examples can be run as usual with the example class ttctexa.cls, which is in the distribution.\n"
-"\n"
-"date: 2010-02-12 12:59:30 +0000"
+#. summary(texlive-specs-u:texlive-serbian-date-lat-doc)
+#, fuzzy
+msgid "Documentation for texlive-serbian-date-lat"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-serbian-date-lat-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-serbian-date-lat"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-serbian-def-cyr)
+msgid "Serbian cyrillic localization"
msgstr ""
-#. description(texlive-presentations)
+#. description(texlive-specs-u:texlive-serbian-def-cyr)
msgid ""
-"This bundle contains all the examples, as source, eps and pdf, of the author's book \"Presentationen mit LaTeX\", from the Dante-Edition series.\n"
+"This package provides abstract, chapter, title, date etc, for serbian language in cyrillic scripts in T2A encoding and cp1251 code pages.\n"
"\n"
-"date: 2010-02-12 12:59:30 +0000"
+"date: 2012-11-14 17:07:03 +0000"
msgstr ""
-#. description(texlive-presentations-en)
-msgid ""
-"This bundle contains all the examples, as source, eps and pdf, of the author's book \"Presentations with LaTeX\", from the Dante-Edition series, Published by Lehmanns Media.\n"
-"\n"
-"date: 2012-08-22 15:34:41 +0000"
+#. summary(texlive-specs-u:texlive-serbian-def-cyr-doc)
+#, fuzzy
+msgid "Documentation for texlive-serbian-def-cyr"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-serbian-def-cyr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-serbian-def-cyr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-serbian-lig)
+msgid "Control ligatures in Serbian"
msgstr ""
-#. description(texlive-toptesi)
+#. description(texlive-specs-u:texlive-serbian-lig)
msgid ""
-"This bundle contains everything is needed for typesetting a bachelor, master or PhD thesis in Italian (or in any other language supported by LaTeX: the bundle is constructed to support multilingual use). The infix strings may be selected and specified at will by means of a configuration file, so as to customize the layout of the front page to the requirements of a specific university. Thanks to its language management, the bundle is suited for multilanguage theses that are becoming more and more frequent thanks to the double degree programs of the European Community Socrates programs. Toptesi is designed to save the PDF version of a thesis in PDF/A-1b compliant mode and with all the necessary metadata.\n"
+"The package suppresses fi and fl (and other ligatures) in Serbian text written using Roman script.\n"
"\n"
-"date: 2013-03-28 09:14:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-sort-by-letters)
-msgid ""
-"This bundle contains several bibliography styles for separating a document's references by the first letter of the first author/editor in the bibliography entry. The styles are adapted from standard ones or from natbib ones.\n"
-"\n"
-"date: 2012-06-04 21:25:44 +0000"
+#. summary(texlive-specs-u:texlive-serbian-lig-doc)
+#, fuzzy
+msgid "Documentation for texlive-serbian-lig"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-serbian-lig-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-serbian-lig"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-setdeck)
+msgid "Typeset cards for Set"
msgstr ""
-#. description(texlive-mfnfss)
+#. description(texlive-specs-u:texlive-setdeck)
msgid ""
-"This bundle contains two packages: - oldgerm, a package to typeset with old german fonts designed by Yannis Haralambous. - pandora, a package to typeset with Pandora fonts designed by Neena Billawala. Note that support for the Pandora fonts is also available via the pandora-latex package.\n"
+"The package will typeset cards for use in a game of Set.\n"
"\n"
-"date: 2010-07-12 09:01:48 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lcdftypetools)
-msgid ""
-"This bundle of tools comprises: - Cfftot1, which translates a Compact Font Format (CFF) font, or a PostScript-flavored OpenType font, into PostScript Type 1 format. It correctly handles subroutines and hints; - Mmafm and mmpfb, which create instances of multiple-master fonts (mmafm and mmpfb were previously distributed in their own package, mminstance); - Otfinfo, which reports information about OpenType fonts, such as the features they support and the contents of their 'size' optical size features; - Otftotfm, which creates TeX font metrics and encodings that correspond to a PostScript-flavored OpenType font. It will interpret glyph positionings, substitutions, and ligatures as far as it is able. You can say which OpenType features should be activated; - T1dotlessj, creates a Type 1 font whose only character is a dotless j matching the input font's design; - T1lint, which checks a Type 1 font for correctness; - T1reencode, which replaces a font's internal encoding with one you spe
cify; and - T1testpage, which creates a PostScript proof for a Type 1 font. It is preliminary software.\n"
-"\n"
-"date: 2012-10-25 22:32:45 +0000"
+#. summary(texlive-specs-u:texlive-setdeck-doc)
+msgid "Documentation for texlive-setdeck"
msgstr ""
-#. description(texlive-tkz-doc)
-msgid ""
-"This bundle offers a documentation class (tkz-doc) and a package (tkzexample). These files are used in the documentation of the author's packages tkz-tab and tkz-linknodes.\n"
-"\n"
-"date: 2011-06-05 21:10:23 +0000"
+#. description(texlive-specs-u:texlive-setdeck-doc)
+msgid "This package includes the documentation for texlive-setdeck"
msgstr ""
-#. description(texlive-latex-tds)
-msgid ""
-"This bundle provides a set of zip file modules containing TDS- compliant trees for items of the LaTeX distribution (both the base system and required packages), together with 'user- friendly' documentation (PDF files with navigation support using bookmarks and links). A further module (knuth) performs the same service for Knuth's software distribution.\n"
-"\n"
-"date: 2013-03-10 14:09:27 +0000"
+#. summary(texlive-specs-u:texlive-setspace)
+msgid "Set space between lines"
msgstr ""
-#. description(texlive-ltxdockit)
+#. description(texlive-specs-u:texlive-setspace)
msgid ""
-"This bundle, consisting of a simple wrapper class and some packages, forms a small LaTeX/BibTeX documentation kit; the author uses it for some of his own packages. The package is not supported: users should not attempt its use unless they are capable of dealing with problems unaided. (The actual purpose of releasing the package is to make it possible for third parties to compile the documentation of other packages, should that be necessary.)\n"
+"Provides support for setting the spacing between lines in a document. Package options include singlespacing, onehalfspacing, and doublespacing. Alternatively the spacing can be changed as required with the \\singlespacing, \\onehalfspacing, and \\doublespacing commands. Other size spacings also available.\n"
"\n"
-"date: 2010-12-10 16:32:44 +0000"
+"date: 2012-04-25 16:00:26 +0000"
msgstr ""
-#. description(texlive-papertex)
-msgid ""
-"This class allows LaTeX users to create a paperTeX newspaper. The final document has a front page and as many inner pages as desired. News items appear one after another and the user can choose the number of columns, style and so on. The class allows users to create newsletters too.\n"
-"\n"
-"date: 2010-06-30 20:56:10 +0000"
+#. summary(texlive-specs-u:texlive-setspace-doc)
+#, fuzzy
+msgid "Documentation for texlive-setspace"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-setspace-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-setspace"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-seuthesis)
+msgid "LaTeX template for theses at Southeastern University"
msgstr ""
-#. description(texlive-nddiss)
+#. description(texlive-specs-u:texlive-seuthesis)
msgid ""
-"This class file conforms to the requirements of the Graduate School of the University of Notre Dame; with it a user can format a thesis or dissertation in LaTeX.\n"
+"This template is for theses at Southeastern University, Nanjing, China.\n"
"\n"
-"date: 2012-07-17 14:43:33 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pbsheet)
-msgid ""
-"This class is designed to simplify the typesetting of problem sheets with Mathematics and Computer Science content. It is currently customised towards teaching in French (and the examples are in French).\n"
-"\n"
-"date: 2007-01-12 22:55:10 +0000"
+#. summary(texlive-specs-u:texlive-seuthesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-seuthesis"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-seuthesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-seuthesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sf298)
+msgid "Standard form 298"
msgstr ""
-#. description(texlive-labbook)
+#. description(texlive-specs-u:texlive-sf298)
msgid ""
-"This class is designed to typeset laboratory journals that contain chronologically ordered records about experiments. From the sectioning commands, an experiment index is generated. The class is based on the KOMA-Script class scrbook.cls. There can be several index entries for one experiment.\n"
+"A LaTeX package for generating a completed standard form 298 (Rev. 8-98) as prescribed by ANSI Std. Z39.18 for report documentation as part of a document delivered, for instance, on a U.S. government contract.\n"
"\n"
-"date: 2008-03-30 18:37:26 +0000"
+"date: 2012-06-04 21:25:44 +0000"
msgstr ""
-#. description(texlive-ppr-prv)
-msgid ""
-"This class is used with LaTeX presentations using the prosper class. ppr-prv stands for 'Prosper Preview'. The aim of this class is to produce a printable version of the slides written with Prosper, with two slides per page.\n"
-"\n"
-"date: 2007-01-13 22:45:25 +0000"
+#. summary(texlive-specs-u:texlive-sf298-doc)
+#, fuzzy
+msgid "Documentation for texlive-sf298"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sf298-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sf298"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sffms)
+msgid "Typesetting science fiction/fantasy manuscripts"
msgstr ""
-#. description(texlive-kerntest)
+#. description(texlive-specs-u:texlive-sffms)
msgid ""
-"This class makes it easy to generate tables that show many different kerning pairs of an arbitrary font, usable by LaTeX. It shows the kerning values that are used in the the font by default. In addition, this class enables the user to alter the kernings and to observe the results. Kerning pairs can be defined for groups of similar glyphs at the same time. An mtx file is generated automatically. The mtx file may then be loaded by fontinst to introduce the user-made kernings into the virtual font for later use in LaTeX.\n"
+"The class is designed for typesetting science fiction and fantasy manuscripts. Sffms now includes several options for specific publishers as well as extensive documentation aimed at new LaTeX users.\n"
"\n"
-"date: 2007-03-08 20:58:53 +0000"
+"date: 2012-06-18 22:14:19 +0000"
msgstr ""
-#. description(texlive-wallpaper)
-msgid ""
-"This collection contains files to add wallpapers (background images) to LaTeX documents. It uses the eso-pic package, but provides simple commands to include effects such as tiling. An example is provided, which works under both LaTeX and pdfLaTeX.\n"
-"\n"
-"date: 2007-01-20 19:21:37 +0000"
+#. summary(texlive-specs-u:texlive-sffms-doc)
+#, fuzzy
+msgid "Documentation for texlive-sffms"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sffms-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sffms"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sfg)
+msgid "Draw signal flow graphs"
msgstr ""
-#. description(texlive-sciposter)
+#. description(texlive-specs-u:texlive-sfg)
msgid ""
-"This collection of files contains LaTeX packages for posters of ISO A3 size and larger (ISO A0 is the default size). American paper sizes and custom paper are supported. In particular, sciposter.cls defines a document class which allows cutting and pasting most of an article to a poster without any editing (save reducing the size) -- see the manual. Sciposter does work for LaTeX, not just pdfLaTeX. However, xdvi produces strange results, though a recent version of dvips does create good ps- files from the dvi files. Also note that logos must either be put in the current working directory or in the directories of your LaTeX distribution. For some reason graphicspath settings are ignored.\n"
+"Defines some commands to draw signal flow graphs as used by electrical and electronics engineers and graph theorists. Requires fp and pstricks packages (and a relatively fast machine).\n"
"\n"
-"date: 2007-02-26 20:24:31 +0000"
+"date: 2012-06-17 12:19:56 +0000"
msgstr ""
-#. description(texlive-mdwtools)
+#. summary(texlive-specs-u:texlive-sfg-doc)
+#, fuzzy
+msgid "Documentation for texlive-sfg"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sfg-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sfg"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sfmath)
+msgid "Sans-serif mathematics"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-sfmath)
msgid ""
-"This collection of tools includes: - support for short commands starting with @, - macros to sanitise the OT1 encoding of the cmtt fonts; - a 'do after' command; - improved footnote support; - mathenv for various alignment in maths; - list handling; - mdwmath which adds some minor changes to LaTeX maths; - a rewrite of LaTeX's tabular and array environments; - verbatim handling; and - syntax diagrams.\n"
+"sfmath is a simple package for sans serif maths in documents. After including the package, all maths of the current document is displayed with sans serif fonts.\n"
"\n"
-"date: 2008-06-23 15:43:34 +0000"
+"date: 2012-06-17 12:19:56 +0000"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-xml)
-msgid "This contains the things you need to do XML-related work, including PassiveTeX, JadeTeX, ConTeXt and Omega."
+#. summary(texlive-specs-u:texlive-sgame)
+msgid "LaTeX style for typesetting strategic games"
msgstr ""
-#. description(texlive-impatient)
+#. description(texlive-specs-u:texlive-sgame)
msgid ""
-"This directory mirrors the canonical source of the project which is maintaining the book \"TeX for the Impatient\", which is now out of print. The book is also available in French translation.\n"
+"Formats strategic games. For a 2x2 game, for example, the input: \\begin{game}{2}{2} &$L$ &$M$\\\\ $T$ &$2,2$ &$2,0$\\\\ $B$ &$3,0$ &$0,9$ \\end{game} produces output with (a) boxes around the payoffs, (b) payoff columns of equal width, and (c) payoffs vertically centered within the boxes. Note that the game environment will not work in the argument of another command.\n"
"\n"
-"date: 2009-06-03 13:47:29 +0000"
+"date: 2013-06-26 17:53:21 +0000"
msgstr ""
-#. description(yast2-pkg-bindings-devel-doc)
-msgid "This documenation package describes the package manager API (Pkg:: namespace) used in YaST scripts. The documentation is autogenerated from the pkg-bindings sources."
+#. summary(texlive-specs-u:texlive-sgame-doc)
+#, fuzzy
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-sgame"
+msgstr "Dokumentace pro digiKam"
+
+#. description(texlive-specs-u:texlive-sgame-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sgame"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shade)
+msgid "Shade pieces of text"
msgstr ""
-#. description(texlive-patgen2-tutorial)
+#. description(texlive-specs-u:texlive-shade)
msgid ""
-"This document describes the use of Patgen 2 to create hyphenation patterns for wide ranges of languages.\n"
+"The package provides a shaded backdrop to a box of text. It uses a Metafont font (provided) which generates to appropriate shading dependent on the resolution used in the Metafont printer parameters.\n"
"\n"
-"date: 2009-12-24 14:14:53 +0000"
+"date: 2012-06-07 18:55:34 +0000"
msgstr ""
-#. description(texlive-macros2e)
-msgid ""
-"This document lists the internal macros defined by the LaTeX2e base files which can be also useful to package authors. The macros are hyper-linked to their description in source2e. For this to work both PDFs must be inside the same directory. This document is not yet complete in content and format and may miss some macros.\n"
-"\n"
-"date: 2011-07-25 12:37:19 +0000"
+#. summary(texlive-specs-u:texlive-shade-doc)
+#, fuzzy
+msgid "Documentation for texlive-shade"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shade-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shade"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shadethm)
+msgid "Theorem environments that are shaded"
msgstr ""
-#. description(texlive-Type1fonts)
+#. description(texlive-specs-u:texlive-shadethm)
msgid ""
-"This guide discusses the most common scenarios you are likely to encounter when installing Type 1 PostScript fonts. While the individual tools employed in the installation process are documented well, the actual difficulty most users are facing when trying to install new fonts is understanding how to put all the pieces together. This is what this guide is about.\n"
+"Extends the \\newtheorem command. If you say \\newshadetheorem{theorem}{Theorem} in the preamble then your regular \\begin{theorem} .. \\end{theorem} will produce a theorem statement in a shaded box. It supports all the options of \\newtheorem, including forms \\newshadetheorem{..}[..]{..} and \\newshadetheorem{..}{..}[..]. Environments declared using the package require their body to remain on one page; the mdframed package can frame and shade theorems, and its environments break at the end of a page; users are generally recommended, therefore, to use mdframed.\n"
"\n"
-"date: 2010-08-29 13:39:11 +0000"
+"date: 2012-08-17 23:33:08 +0000"
msgstr ""
-#. description(texlive-translation-arsclassica-de)
-msgid ""
-"This is a \"translation\" of the arsclassica dcoumentation.\n"
-"\n"
-"date: 2011-09-01 17:45:17 +0000"
+#. summary(texlive-specs-u:texlive-shadethm-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-shadethm"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shadethm-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shadethm"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shadow)
+msgid "Shadow boxes"
msgstr ""
-#. description(texlive-translation-chemsym-de)
+#. description(texlive-specs-u:texlive-shadow)
msgid ""
-"This is a \"translation\" of the chemsym documentation.\n"
+"Defines a command \\shabox (analgous to \\fbox), and supporting mechanisms.\n"
"\n"
-"date: 2011-09-01 16:55:53 +0000"
+"date: 2012-06-07 18:55:34 +0000"
msgstr ""
-#. description(texlive-translation-ecv-de)
-msgid ""
-"This is a \"translation\" of the ecv documentation.\n"
-"\n"
-"date: 2011-09-15 16:36:27 +0000"
+#. summary(texlive-specs-u:texlive-shadow-doc)
+#, fuzzy
+msgid "Documentation for texlive-shadow"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shadow-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shadow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shadowtext)
+msgid "Shadowtext"
msgstr ""
-#. description(texlive-translation-europecv-de)
+#. description(texlive-specs-u:texlive-shadowtext)
msgid ""
-"This is a \"translation\" of the europecv documentation.\n"
+"The package introduces a command \\shadowtext, which adds a drop shadow to the text that is given as its argument. The colour and positioning of the shadow are customisable.\n"
"\n"
-"date: 2011-09-05 09:34:40 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-translation-filecontents-de)
-msgid ""
-"This is a \"translation\" of the filecontents documentation.\n"
-"\n"
-"date: 2011-09-18 07:08:24 +0000"
+#. summary(texlive-specs-u:texlive-shadowtext-doc)
+#, fuzzy
+#| msgid "Documentation for adaptx"
+msgid "Documentation for texlive-shadowtext"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shadowtext-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shadowtext"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shapepar)
+msgid "A macro to typeset paragraphs in specific shapes"
msgstr ""
-#. description(texlive-translation-moreverb-de)
+#. description(texlive-specs-u:texlive-shapepar)
msgid ""
-"This is a \"translation\" of the moreverb documentation.\n"
+"\\shapepar is a macro to typeset paragraphs in a specific shape. The size is adjusted automatically so that the entire shape is filled with text. There may not be displayed maths or '\\vadjust' material (no \\vspace) in the argument of \\shapepar. The macros work for both LaTeX and plain TeX. For LaTeX, specify \\usepackage{shapepar}; for Plain, \\input shapepar.sty. \\shapepar works in terms of user-defined shapes, though the package does provide some predefined shapes: so you can form any paragraph into the form of a heart by putting \\heartpar{sometext...} inside your document. The tedium of creating these polygon definitions may be alleviated by using the shapepatch extension to transfig which will convert xfig output to \\shapepar polygon form.\n"
"\n"
-"date: 2011-09-14 15:59:09 +0000"
+"date: 2013-05-27 18:07:27 +0000"
msgstr ""
-#. description(texlive-latex-veryshortguide)
-msgid ""
-"This is a 4-page reminder of what LaTeX does. It is designed for printing on A4 paper, double-sided, and folding once to A5. (Such an 'imposed' version of the document is provided in the distribution, as PDF.)\n"
-"\n"
-"date: 2013-01-22 17:02:11 +0000"
+#. summary(texlive-specs-u:texlive-shapepar-doc)
+#, fuzzy
+msgid "Documentation for texlive-shapepar"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shapepar-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shapepar"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shipunov)
+msgid "A collection of LaTeX packages and classes"
msgstr ""
-#. description(texlive-lfb)
+#. description(texlive-specs-u:texlive-shipunov)
msgid ""
-"This is a Greek font written in MetaFont, with inspiration from the Bodoni typefaces in old books. It is stylistically a little more exotic than the standard textbook Greek fonts, particularly in glyphs like the lowercase rho and kappa. It aims for a rather calligraphic feel, but seems to blend well with Computer Modern. There is a ligature scheme which automatically inserts the breathings required for ancient texts, making the input text more readable than in some schemes.\n"
+"The bundle collects packages and classes, along with one bibliography style and examples and scripts for converting TeX files. Many of the files in the collection are designed to support field biologists and/or Russian writers, while others have wider application. The collection includes (among others): altverse, a simple verse typesetting package; autolist, which provides various list formatting facilities; biokey, which provides a mechanism for typesetting biological identification lists; biolist, which typesets species lists; boldline, which typesets heavier separating lines in tables; cassete, which lays out audio cassette inserts; classif2, which typesets classification lists; drcaps, which provides dropped capital macros; etiketka, a class for typesetting business-card-sized information (including business cards); flower, for typesetting lists of flower formulae; isyntax; numerus; punct; sltables, which develops on the stables package, for use in a LaTeX context; and starfn.\
n"
"\n"
-"date: 2006-10-18 06:58:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-sides)
-msgid ""
-"This is a LaTeX class for typesetting stage plays, based on the plari class written by Antti-Juhani Kaijanaho in 1998. It has been updated and several formatting changes have been made to it--most noticibly there are no longer orphans.\n"
-"\n"
-"date: 2007-02-26 20:24:31 +0000"
+#. summary(texlive-specs-u:texlive-shipunov-doc)
+#, fuzzy
+msgid "Documentation for texlive-shipunov"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shipunov-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shipunov"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shorttoc)
+msgid "Table of contents with different depths"
msgstr ""
-#. description(texlive-luatexko)
+#. description(texlive-specs-u:texlive-shorttoc)
msgid ""
-"This is a Lua(La)TeX macro package that supports typesetting Korean documents. LuaTeX version 0.76+ and luaotfload package version 2.2+ are required. This package also requires both cjk- ko and xetexko packages for its full functionality.\n"
+"A package to create another table of contents with a different depth, useful in large documents where a detailed table of contents should be accompanied by a shorter one, giving only a general overview of the main topics in the document.\n"
"\n"
-"date: 2013-05-20 15:36:30 +0000"
+"date: 2013-10-03 12:20:59 +0000"
msgstr ""
-#. description(texlive-pst-fun)
-msgid ""
-"This is a PSTricks related package for drawing funny objects, like ant, bird, fish, kangaroo, ... Such objects may be useful for testing other PSTricks macros and/or packages. (Or they can be used for fun...)\n"
-"\n"
-"date: 2010-04-18 14:26:27 +0000"
+#. summary(texlive-specs-u:texlive-shorttoc-doc)
+#, fuzzy
+msgid "Documentation for texlive-shorttoc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shorttoc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shorttoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-show2e)
+msgid "Variants of \\show for LaTeX2e"
msgstr ""
-#. description(texlive-ltxtools)
+#. description(texlive-specs-u:texlive-show2e)
msgid ""
-"This is a bundle of macros that the author uses in the coding of others of his macro files.\n"
+"This small package aims at making debugging (especially in an interactive way) easier, by providing \\show variants suited to LaTeX2e commands (whether with optional arguments or robust) and environments. The variant commands also display the internal macros used by such commands, if any. The \\showcs variant helps with macros with exotic names.\n"
"\n"
-"date: 2011-12-19 22:56:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-msu-thesis)
-msgid ""
-"This is a class file for producing dissertations and theses according to the Michigan State University Graduate School Guidelines for Electronic Submission of Master's Theses and Dissertations (2010). The class is based on the memoir document class, and thefore inherits all of the functionality of that class.\n"
-"\n"
-"date: 2012-12-02 12:05:20 +0000"
+#. summary(texlive-specs-u:texlive-show2e-doc)
+#, fuzzy
+msgid "Documentation for texlive-show2e"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-show2e-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-show2e"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-showcharinbox)
+msgid "Show characters inside a box"
msgstr ""
-#. description(texlive-latex-fonts)
+#. description(texlive-specs-u:texlive-showcharinbox)
msgid ""
-"This is a collection of fonts for use with standard latex packages and classes. It includes 'invisible' fonts (for use with the slides class), line and circle fonts (for use in the picture environment) and 'latex symbol' fonts. For full support of a latex installation, some Computer Modern font variants cmbsy(6-9), cmcsc(8,9), cmex(7-9) and cmmib(5-9) from the amsfonts distribution, are also necessary. The fonts are available as Metafont source, and metric (tfm) files are also provided. Most of the fonts are also available in Adobe Type 1 format, in the amsfonts distribution.\n"
+"The package typesets a character inside a box, showing where reference point is, and displaying width, height, and depth information of the character. The output is like that on page 63 of \"The TeXBook\" or page 101 of \"The METAFONTbook\". The package itself is motivated by Knuth's macros in the file manmac.tex. Users should note that using a small size for the character inside the box does not make any sense: use a large size.\n"
"\n"
-"date: 2012-07-07 13:54:01 +0000"
+"date: 2014-04-29 04:13:54 +0000"
msgstr ""
-#. description(texlive-pdfjam)
-msgid ""
-"This is a collection of shell scripts which provide an interface to the pdfpages LaTeX package. They do such jobs as selecting pages, concatenating files, doing n-up formatting, and so on.\n"
-"\n"
-"date: 2012-06-16 23:47:14 +0000"
+#. summary(texlive-specs-u:texlive-showcharinbox-doc)
+msgid "Documentation for texlive-showcharinbox"
msgstr ""
-#. description(texlive-tex-font-errors-cheatsheet)
+#. description(texlive-specs-u:texlive-showcharinbox-doc)
+msgid "This package includes the documentation for texlive-showcharinbox"
+msgstr ""
+
+#. summary(texlive-specs-u:texlive-showdim)
+msgid "Variants on printing dimensions"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-showdim)
msgid ""
-"This is a compact three-pages document highlighting the TeX flow of integrating fonts, and explains how some of the most common font-related error messages occur. Also, hints are given on how to address those.\n"
+"A package for LaTeX providing a number of commands for printing the value of a TeX dimension. For example, \\tenthpt{\\baselineskip} yields the current value of \\baselineskip rounded to the nearest tenth of a point.\n"
"\n"
-"date: 2010-05-16 19:06:03 +0000"
+"date: 2013-01-26 19:44:01 +0000"
msgstr ""
-#. description(yast2-trans)
-msgid "This is a container package. Its only purpose is to build the yast2-trans-LL, yast2-trans-LLL, and yast2-trans-LL_CC packages as subpackages."
+#. summary(texlive-specs-u:texlive-showdim-doc)
+msgid "Documentation for texlive-showdim"
msgstr ""
-#. description(tkxcd)
-msgid "This is a diff front-end with a look and feel based on Atria Clearcase xcleardiff. Both files are displayed in a window each and the differences are marked in different colors."
+#. description(texlive-specs-u:texlive-showdim-doc)
+msgid "This package includes the documentation for texlive-showdim"
msgstr ""
-#. description(texlive-multicap)
+#. summary(texlive-specs-u:texlive-showexpl)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typesetting LaTeX source code"
+msgstr "Zpracování XML pomocí TeXu"
+
+#. description(texlive-specs-u:texlive-showexpl)
msgid ""
-"This is a package for formatting captions of column figures and column tabular material, which cannot be standard floats in a multicols environment. The package also provides a convenient way to customise your captions, whether they be in multicols or not.\n"
+"This package provides a way to typeset LaTeX source code and the related result in the same document.\n"
"\n"
-"date: 2006-12-15 14:26:27 +0000"
+"date: 2014-01-20 14:14:58 +0000"
msgstr ""
-#. description(yast2-testsuite)
-msgid "This is a package for the YaST2 modules testsuite preparation and execution."
-msgstr "Tento balík obsahuje sadu souborů potřebných pro testování součástí YaST2 a jeho přípravu."
+#. summary(texlive-specs-u:texlive-showexpl-doc)
+#, fuzzy
+msgid "Documentation for texlive-showexpl"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pdfslide)
-msgid ""
-"This is a package for use with pdftex, to make nice presentation slides. Its aims are: to devise a method for easier technical presentation; to help the mix of mathematical formulae with text and graphics which the present day wysiwyg tools fail to accomplish; to exploit the platform independence of TeX so that presentation documents become portable; and to offer the freedom and possibilities of using various backgrounds and other embellishments that a user can imagine to have in as presentation. The package can make use of the facilities of the PPower4 post-processor.\n"
-"\n"
-"date: 2006-12-05 22:27:16 +0000"
+#. description(texlive-specs-u:texlive-showexpl-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-showexpl"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-showhyphens)
+msgid "Show all possible hyphenations in LuaLaTeX"
msgstr ""
-#. description(texlive-luaxml)
+#. description(texlive-specs-u:texlive-showhyphens)
msgid ""
-"This is a redistribution of a pure lua xml library, LuaXML. The library was originally distributed as part of the odsfile package, but is made available separately in the hope that it can be useful for other projects.\n"
+"With this package, LuaLaTeX will indicate all possible hyphenations in the printed output.\n"
"\n"
-"date: 2013-05-27 18:07:27 +0000"
+"date: 2012-06-28 13:32:05 +0000"
msgstr ""
-#. description(texlive-index)
-msgid ""
-"This is a reimplementation of LaTeX's indexing macros to provide better support for indexing. For example, it supports multiple indexes in a single document and provides a more robust \\index command. It supplies short hand notations for the \\index command (^{word}) and a * variation of \\index (abbreviated _{word}) that prints the word being indexed, as well as creating an index entry for it.\n"
-"\n"
-"date: 2008-04-20 17:53:04 +0000"
+#. summary(texlive-specs-u:texlive-showhyphens-doc)
+#, fuzzy
+msgid "Documentation for texlive-showhyphens"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-showhyphens-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-showhyphens"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-showlabels)
+msgid "Show label commands in the margin"
msgstr ""
-#. description(texlive-xecolor)
+#. description(texlive-specs-u:texlive-showlabels)
msgid ""
-"This is a simple package which defines about 140 different colours using XeTeX's colour feature. The colours can be used in bidirectional texts without any problem.\n"
+"This package helps you keep track of all the labels you define, by putting the name of new labels into the margin whenever the \\label command is used. The package allows you to do the same thing for other commands. The only one for which this is obviously useful is the \\cite command, but it's easy to do it for others, such as the \\ref or \\begin commands.\n"
"\n"
-"date: 2013-04-04 10:47:47 +0000"
+"date: 2013-12-07 00:06:37 +0000"
msgstr ""
-#. description(texlive-jneurosci)
-msgid ""
-"This is a slightly modified version of the namedplus style, which fully conforms with the Journal of Neuroscience citation style. It should be characterised as an author-date citation style; a BibTeX style and a LaTeX package are provided.\n"
-"\n"
-"date: 2010-03-06 19:55:14 +0000"
+#. summary(texlive-specs-u:texlive-showlabels-doc)
+#, fuzzy
+msgid "Documentation for texlive-showlabels"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-showlabels-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-showlabels"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-showtags)
+msgid "Print the tags of bibliography entries"
msgstr ""
-#. description(texlive-jablantile)
+#. description(texlive-specs-u:texlive-showtags)
msgid ""
-"This is a small Metafont font to implement the modular tiles described by Slavik Jablan. For an outline of the theoretical structure of the tiles, see (for example) Jablan's JMM 2006 Exhibit.\n"
+"Prints the tag right-aligned on each line of the bibliography.\n"
"\n"
-"date: 2009-12-10 10:03:10 +0000"
+"date: 2012-06-28 13:32:05 +0000"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-small)
-msgid "This is a small TeX Live scheme, corresponding to MacTeX's BasicTeX variant. It adds XeTeX, MetaPost, various hyphenations, and some recommended packages to scheme-basic."
+#. summary(texlive-specs-u:texlive-showtags-doc)
+#, fuzzy
+msgid "Documentation for texlive-showtags"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-showtags-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-showtags"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-shuffle)
+msgid "A symbol for the shuffle product"
msgstr ""
-#. description(texlive-splines)
+#. description(texlive-specs-u:texlive-shuffle)
msgid ""
-"This is a small package of macros for creating cubic spline interpolants in MetaPost or MetaFont. Given a list of points the macros can produce a closed or a relaxed spline joining them. Given a list of function values y_j at x_j, the result would define the graph of a cubic spline interpolating function y=f(x), which is either periodic or relaxed.\n"
+"The bundle provides a LaTeX package and a font (as Metafont source) for the shuffle product which is used in some part of mathematics and physics.\n"
"\n"
-"date: 2007-03-12 10:51:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-scalebar)
-msgid ""
-"This is a small package to create scalebars for maps, diagrams or photos. It was designed for use with cave maps but can be used for anything from showing a scalebar in kilometers for topographic maps to a scalebar in micrometers for an electron microscope image.\n"
-"\n"
-"date: 2006-11-06 12:28:58 +0000"
+#. summary(texlive-specs-u:texlive-shuffle-doc)
+#, fuzzy
+msgid "Documentation for texlive-shuffle"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-shuffle-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-shuffle"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sidecap)
+msgid "Typeset captions sideways"
msgstr ""
-#. description(translation-update-upstream)
+#. description(texlive-specs-u:texlive-sidecap)
msgid ""
-"This is a tool providing update of translations using available upstream resources.\n"
+"Defines environments called SCfigure and SCtable (analogous to figure and table) to typeset captions sideways. Options include outercaption, innercaption, leftcaption and rightcaption.\n"
"\n"
-"The tool tool is intended for use during package compilation as a first command after unpacking of source code.\n"
-"\n"
-"For more see README and HOWTO.\n"
-"\n"
-"This package also includes translation update data files."
+"date: 2012-06-28 13:32:05 +0000"
msgstr ""
-#. description(texlive-tipa-de)
-msgid ""
-"This is a translation of Fukui Rei's tipaman from the tipa bundle.\n"
-"\n"
-"date: 2011-04-06 06:36:04 +0000"
+#. summary(texlive-specs-u:texlive-sidecap-doc)
+#, fuzzy
+msgid "Documentation for texlive-sidecap"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sidecap-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sidecap"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sidenotes)
+msgid "Typeset notes containing rich content, in the margin"
msgstr ""
-#. description(texlive-translation-enumitem-de)
+#. description(texlive-specs-u:texlive-sidenotes)
msgid ""
-"This is a translation of the manual for enumitem.\n"
+"The package allows typesetting of texts with notes, figures, citations, captions and tables in the margin. This is common (for example) in science text books.\n"
"\n"
-"date: 2011-10-04 20:25:03 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-psfrag-italian)
-msgid ""
-"This is a translation of the the documentation that comes with the psfrag documentation.\n"
-"\n"
-"date: 2008-08-22 22:25:16 +0000"
+#. summary(texlive-specs-u:texlive-sidenotes-doc)
+#, fuzzy
+msgid "Documentation for texlive-sidenotes"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sidenotes-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sidenotes"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sides)
+msgid "A LaTeX class for typesetting stage plays"
msgstr ""
-#. description(texlive-latexcheat-ptbr)
+#. description(texlive-specs-u:texlive-sides)
msgid ""
-"This is a translation to Brazilian Portuguese of Winston Chang's LaTeX cheat sheet\n"
+"This is a LaTeX class for typesetting stage plays, based on the plari class written by Antti-Juhani Kaijanaho in 1998. It has been updated and several formatting changes have been made to it--most noticibly there are no longer orphans.\n"
"\n"
-"date: 2009-04-10 09:30:41 +0000"
+"date: 2012-06-28 13:32:05 +0000"
msgstr ""
-#. description(texlive-latexcheat-esmx)
-msgid ""
-"This is a translation to Spanish (Castellano) of Winston Chang's LaTeX cheat sheet (a reference sheet for writing scientific papers).\n"
-"\n"
-"date: 2010-01-09 23:40:15 +0000"
+#. summary(texlive-specs-u:texlive-sides-doc)
+#, fuzzy
+msgid "Documentation for texlive-sides"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sides-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sides"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-silence)
+msgid "Selective filtering of error messages and warnings"
msgstr ""
-#. description(texlive-uafthesis)
+#. description(texlive-specs-u:texlive-silence)
msgid ""
-"This is an \"unofficial\" official class.\n"
+"The package allows the user to filter out unwanted warnings and error messages issued by LaTeX, packages and classes, so they won't pop out when there's nothing one can do about them. Filtering goes from the very broad (\"avoid all messages by such and such\") to the fine-grained (\"avoid messages that begin with...\"). Messages may be saved to an external file for later reference.\n"
"\n"
-"date: 2012-12-11 16:42:57 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mathabx-type1)
+#. summary(texlive-specs-u:texlive-silence-doc)
+#, fuzzy
+msgid "Documentation for texlive-silence"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-silence-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-silence"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-simplecd)
+msgid "Simple CD, DVD covers for printing"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-simplecd)
msgid ""
-"This is an Adobe Type 1 outline version of the mathabx fonts.\n"
+"The package provides printable cut-outs for various CD, DVD and other disc holders. The name of the package comes from its implementation and ease of use; it was designed just for text content, but since the text is placed in a \\parbox in a tabular environment cell, a rather wide range of things may be placed.\n"
"\n"
-"date: 2011-01-19 06:58:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-icsv)
+#. summary(texlive-specs-u:texlive-simplecd-doc)
+#, fuzzy
+msgid "Documentation for texlive-simplecd"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-simplecd-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-simplecd"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-simplecv)
+msgid "A simple class for writing curricula vitae"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-simplecv)
msgid ""
-"This is an ad-hoc class for typesetting articles for the ICSV conference, based on the earler active-conf by the same author.\n"
+"A derivative of the cv class available to lyx users (renamed to avoid the existing cv package).\n"
"\n"
-"date: 2008-05-21 21:07:53 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tex-refs)
+#. summary(texlive-specs-u:texlive-simplecv-doc)
+#, fuzzy
+msgid "Documentation for texlive-simplecv"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-simplecv-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-simplecv"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-simplewick)
+#, fuzzy
+msgid "Simple Wick contractions"
+msgstr "Nástroj pro konfiguraci GNOME 2.x"
+
+#. description(texlive-specs-u:texlive-simplewick)
msgid ""
-"This is an ongoing project with the aim of providing a help file for LaTeX (and its friends like ConTeXt, Metapost, Metafont, etc.) using a state-of-the-art source format, aka DocBook/XML.\n"
+"The package provides a simple means of drawing Wick contractions above and below expressions.\n"
"\n"
-"date: 2008-04-20 17:53:04 +0000"
+"date: 2012-04-05 16:24:08 +0000"
msgstr ""
-#. description(texlive-onrannual)
+#. summary(texlive-specs-u:texlive-simplewick-doc)
+#, fuzzy
+msgid "Documentation for texlive-simplewick"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-simplewick-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-simplewick"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-simplified-latex)
+msgid "A Simplified Introduction to LaTeX"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-simplified-latex)
msgid ""
-"This is an unofficial document class for writing ONR annual reports using LaTeX; as ONR has had numerous problems with LaTeX-generated PDF submissions in the past. A skeleton document (and its PDF output) are included.\n"
+"An accessible introduction for the beginner.\n"
"\n"
-"date: 2010-03-20 00:12:30 +0000"
+"date: 2012-04-05 16:24:08 +0000"
msgstr ""
-#. description(texlive-lshort-czech)
+#. summary(texlive-specs-u:texlive-simurgh)
#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset Parsi in LuaLaTeX"
+msgstr "Zpracování XML pomocí TeXu"
+
+#. description(texlive-specs-u:texlive-simurgh)
msgid ""
-"This is the Czech translation of \"A Short Introduction to LaTeX2e\".\n"
+"The package provides an automatic and unified interface for Parsi typesetting in LaTeX, using the LuaTeX engine. The project to produce this system is dedicated to Ferdowsi The Great.\n"
"\n"
-"date: 2012-07-16 15:38:59 +0000"
-msgstr "Bulharské překlady pro KOffice"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-lshort-dutch)
+#. summary(texlive-specs-u:texlive-simurgh-doc)
+#, fuzzy
+msgid "Documentation for texlive-simurgh"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-simurgh-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-simurgh"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sitem)
+msgid "Save the optional argument of \\item"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-sitem)
msgid ""
-"This is the Dutch (Nederlands) translation of the Short Introduction to LaTeX2e.\n"
+"The package modifies \\item commands to save the optional argument in a box.\n"
"\n"
-"date: 2006-08-27 15:41:02 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lshort-finnish)
+#. summary(texlive-specs-u:texlive-sitem-doc)
+#, fuzzy
+msgid "Documentation for texlive-sitem"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sitem-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sitem"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-siunitx)
+msgid "A comprehensive (SI) units package"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-siunitx)
msgid ""
-"This is the Finnish translation of Short Introduction to LaTeX2e, with added coverage of Finnish typesetting rules.\n"
+"Typesetting values with units requires care to ensure that the combined mathematical meaning of the value plus unit combination is clear. In particular, the SI units system lays down a consistent set of units with rules on how they are to be used. However, different countries and publishers have differing conventions on the exact appearance of numbers (and units). A number of LaTeX packages have been developed to provide consistent application of the various rules: SIunits, sistyle, unitsdef and units are the leading examples. The numprint package provides a large number of number-related functions, while dcolumn and rccol provide tools for typesetting tabular numbers. The siunitx package takes the best from the existing packages, and adds new features and a consistent interface. A number of new ideas have been incorporated, to fill gaps in the existing provision. The package also provides backward-compatibility with SIunits, sistyle, unitsdef and units. The aim is to have one pack
age to handle all of the possible unit-related needs of LaTeX users. The package relies on LaTeX 3 support from the l3kernel and l3packages bundles.\n"
"\n"
-"date: 2008-12-13 16:42:32 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-gust)
-msgid "This is the GUST TeX Live scheme: it is a set of files sufficient to typeset Polish plain TeX, LaTeX and ConTeXt documents in PostScript or PDF."
+#. summary(texlive-specs-u:texlive-siunitx-doc)
+#, fuzzy
+msgid "Documentation for texlive-siunitx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-siunitx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-siunitx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-skak)
+msgid "Fonts and macros for typesetting chess games"
msgstr ""
-#. description(texlive-lshort-italian)
+#. description(texlive-specs-u:texlive-skak)
msgid ""
-"This is the Italian translation of the Short Introduction to LaTeX2e.\n"
+"This package provides macros and fonts in Metafont format which can be used to typeset chess games using PGN, and to show diagrams of the current board in a document. The package builds on work by Piet Tutelaers -- the main novelty is the use of PGN for input instead of the more cumbersome coordinate notation (g1f3 becomes the more readable Nf3 in PGN). An Adobe Type 1 implementation of skak's fonts is available as package skaknew; an alternative chess notational scheme is available in package texmate, and a general mechanism for selecting chess fonts is provided in chessfss.\n"
"\n"
-"date: 2006-12-31 23:42:16 +0000"
+"date: 2014-01-22 18:51:35 +0000"
msgstr ""
-#. description(texlive-lshort-polish)
+#. summary(texlive-specs-u:texlive-skak-doc)
+#, fuzzy
+msgid "Documentation for texlive-skak"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-skak-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-skak"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-skaknew)
+msgid "The skak chess fonts redone in Adobe Type 1"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-skaknew)
msgid ""
-"This is the Polish translation of A Short Introduction to LaTeX2e.\n"
+"This package offers Adobe Type 1 versions of the fonts provided as Metafont source by the skak bundle.\n"
"\n"
-"date: 2006-12-27 23:06:45 +0000"
+"date: 2012-07-20 21:43:44 +0000"
msgstr ""
-#. description(texlive-lshort-portuguese)
+#. summary(texlive-specs-u:texlive-skaknew-doc)
+#, fuzzy
+msgid "Documentation for texlive-skaknew"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-skaknew-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-skaknew"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-skaknew-fonts)
+msgid "Severed fonts for texlive-skaknew"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-skaknew-fonts)
+msgid "The separated fonts package for texlive-skaknew"
+msgstr ""
+
+#. summary(texlive-specs-u:texlive-skb)
+msgid "Tools for a repository of long-living documents"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-skb)
msgid ""
-"This is the Portuguese translation of A Short Introduction to LaTeX2e.\n"
+"The package provides macros that help to build a document repository for long living documents. It focuses on structure and re-use of text, code, figures etc. The basic concept is first to separate structure from content (i.e., text about a topic from the structure it is presented by) and then separating the content from the actual published document, thus enabling easy re-use of text blocks in different publications (i.e., text about a protocol in a short article about this protocol as well as in a book about many protocols); all without constantly copying or changing text. As a side effect, using the document classes provided, it hides a lot of LaTeX from someone who just wants to write articles and books.\n"
"\n"
-"date: 2011-05-22 09:03:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-context)
-msgid "This is the TeX Live scheme for installing ConTeXt."
+#. summary(texlive-specs-u:texlive-skb-doc)
+#, fuzzy
+msgid "Documentation for texlive-skb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-skb-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-skb"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-skdoc)
+msgid "Documentation and extraction for packages and document classes"
msgstr ""
-#. description(texlive-lshort-thai)
+#. description(texlive-specs-u:texlive-skdoc)
msgid ""
-"This is the Thai translation of the Short Introduction to LaTeX2e.\n"
+"The class provides the functionality and implementation of packages and document classes. It is loosely based on the ydoc and ltxdoc classes, but has a number of incompatible differences. The class defines a MacroCode environment which offers an alternative to the the usual docstrip method of installing packages. It has the ability to generate both documentation and code in a single run of a single file.\n"
"\n"
-"date: 2006-08-27 15:41:02 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-basic)
-msgid "This is the basic TeX Live scheme: it is a small set of files sufficient to typeset plain TeX or LaTeX documents in PostScript or PDF, using the Computer Modern fonts. This scheme corresponds to collection-basic and collection-latex."
+#. summary(texlive-specs-u:texlive-skdoc-doc)
+msgid "Documentation for texlive-skdoc"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-full)
-msgid "This is the full TeX Live scheme: it installs everything available."
+#. description(texlive-specs-u:texlive-skdoc-doc)
+msgid "This package includes the documentation for texlive-skdoc"
msgstr ""
-#. description(texlive-patgen)
+#. summary(texlive-specs-u:texlive-skeycommand)
+msgid "Create commands using parameters and keyval in parallel"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-skeycommand)
msgid ""
-"This is the last version of the program distributed by Knuth; it advertises itself as a pattern generator for \"the algorithm used in TeX\", but, of course, the patterns used in modern distributions are Unicode-based.\n"
+"The package provides tools for defining LaTeX commands and environments using combinations of parameters and keys. All the facilities of the ltxkeys and skeyval packages are available to the user of skeycommand.\n"
"\n"
-"date: 2012-06-09 18:15:34 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-medium)
-msgid "This is the medium TeX Live collection: it contains plain TeX, LaTeX, many recommended packages, and support for most European languages."
+#. summary(texlive-specs-u:texlive-skeycommand-doc)
+#, fuzzy
+msgid "Documentation for texlive-skeycommand"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-skeycommand-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-skeycommand"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-skeyval)
+msgid "Key-value parsing combining features of xkeyval and pgfkeys"
msgstr ""
-#. description(texlive-filesystem:texlive-scheme-minimal)
-msgid "This is the minimal TeX Live scheme, with support for only plain TeX. (No LaTeX macros.) LuaTeX is included because Lua scripts are used in TeX Live infrastructure. This scheme corresponds exactly to collection-basic."
+#. description(texlive-specs-u:texlive-skeyval)
+msgid ""
+"The package integrates the features of xkeyval and of pgfkeys by introducing a new type of handlers. Style keys, links, changing key callbacks and values on the fly, and other features of pgfkeys are introduced in a new context.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-qstest)
+#. summary(texlive-specs-u:texlive-skeyval-doc)
+#, fuzzy
+msgid "Documentation for texlive-skeyval"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-skeyval-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-skeyval"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-skmath)
+msgid "Extensions to the maths command repertoir"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-skmath)
msgid ""
-"This is the public release of the qstest bundle (written for DocScape Publisher) (C) 2006, 2007 QuinScape GmbH. The bundle contains the packages 'makematch' for matching patterns to targets (with a generalization in the form of pattern lists and keyword lists), and 'qstest' for performing unit tests, allowing the user to run a number of logged tests ensuring the consistency of values, properties and call sequences during execution of test code. Both packages make extensive use of in their package documentation, providing illustrated examples that are automatically verified to work as expected. Check the README file for details.\n"
+"The package provides a selection of new maths commands and improved re-definitions of existing commands.\n"
"\n"
-"date: 2008-08-24 08:50:19 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xml-commons-apis-bootstrap)
-msgid "This is xml-apis from the java-bootrapping-tools package. DO NOT INSTALL ... THIS IS JUST FOR PACKAGING & BOOTSTRAPPING JAVA PURPOSES!!"
+#. summary(texlive-specs-u:texlive-skmath-doc)
+msgid "Documentation for texlive-skmath"
msgstr ""
-#. description(xml-commons-apis-bootstrap:xml-commons-resolver-bootstrap)
-msgid "This is xml-resolver from the java-bootrapping-tools package. DO NOT INSTALL ... THIS IS JUST FOR PACKAGING & BOOTSTRAPPING JAVA PURPOSES!!"
+#. description(texlive-specs-u:texlive-skmath-doc)
+msgid "This package includes the documentation for texlive-skmath"
msgstr ""
-#. description(xml-commons-apis-bootstrap:xml-commons-which-bootstrap)
-msgid "This is xml-which from the java-bootrapping-tools package. DO NOT INSTALL ... THIS IS JUST FOR PACKAGING & BOOTSTRAPPING JAVA PURPOSES!!"
+#. summary(texlive-specs-u:texlive-skrapport)
+msgid "'Simple' class for reports, etcetera"
msgstr ""
-#. description(texlive-lithuanian)
+#. description(texlive-specs-u:texlive-skrapport)
msgid ""
-"This language support package provides: - Lithuanian language hyphenation patterns; - Lithuanian support for Babel; - Lithuanian mapping and metrics for using the URW base-35 Type 1 fonts; - examples for making Lithuanian fonts with fontinst; and - extra tools for intputenc and fontenc.\n"
+"The class is intended for simple documents (e.g., reports handed in as coursework and the like). The class is small and straightforward; its design was inspired by that of the PracTeX journal style.\n"
"\n"
-"date: 2008-11-05 23:30:15 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-tlib)
-msgid "This library provides some utility functions. There isn't much need to install it unless another plugin requires you to do so."
+#. summary(texlive-specs-u:texlive-skrapport-doc)
+msgid "Documentation for texlive-skrapport"
msgstr ""
-#. description(yast2-audit-laf)
-msgid "This module allows the configuration of the audit daemon as well as to add rules for the audit subsystem."
+#. description(texlive-specs-u:texlive-skrapport-doc)
+msgid "This package includes the documentation for texlive-skrapport"
msgstr ""
-#. description(yast2-support)
-msgid "This module allows you to collect system information for installation support in a standardized format."
-msgstr "Tento modul umožňuje posílat dotazy na Instalační podporu ve standardizovaném formátu. "
+#. summary(texlive-specs-u:texlive-skull)
+msgid "A font to draw a skull"
+msgstr ""
-#. description(texlive-ut-thesis)
+#. description(texlive-specs-u:texlive-skull)
msgid ""
-"This not described as an 'official' class, just one distributed \"in the hope that it will be useful\". A skeleton file, using the class, is provided.\n"
+"The font (defined in Metafont) defines a single character, a black solid skull. A package is supplied to make this character available as a symbol in maths mode.\n"
"\n"
-"date: 2012-06-01 17:19:53 +0000"
+"date: 2012-05-28 09:05:13 +0000"
msgstr ""
-#. description(texlive-opcit)
-msgid ""
-"This package addresses the problem of expressing citations in a style that is natural for humanities studies, yet does not interfere with the flow of text (as author-year styles do). The package differs from footbib in that it uses real footnotes, potentially in the same series as any of the document's other footnotes. Opcit also, as its name implies, avoids repetition of full citations, achieving this, to a large extent, automatically.\n"
-"\n"
-"date: 2006-09-21 19:56:41 +0000"
+#. summary(texlive-specs-u:texlive-slantsc)
+msgid "Access different-shaped small-caps fonts"
msgstr ""
-#. description(texlive-syntrace)
+#. description(texlive-specs-u:texlive-slantsc)
msgid ""
-"This package adds support for for traces in trees created using either the synttree or the qtree package. The package provides two commands (\\traceLabel and \\traceReference) to set and use a trace.\n"
+"This package enables the use of small capitals in different font shapes, e.g., slanted or bold slanted for all fonts that provide appropriate font shapes. (Note that a separate .fd file is needed to define font shapes such as 'scsl' or 'scit'.)\n"
"\n"
-"date: 2007-03-13 14:26:21 +0000"
+"date: 2012-05-28 09:05:13 +0000"
msgstr ""
-#. description(texlive-piano)
-msgid ""
-"This package adds the \\keyboard[1][2]..[7] command to your project. When used, it draws a small 2 octaves piano keyboard on your document, with up to 7 keys highlighted. Keys go : Co, Cso, Do, Dso, Eo, Fo, Fso, Go, Gso, Ao, Aso, Bo, Ct, Cst, Dt, Dst, Et, Ft, Fst, Gt, Gst, At, Ast and Bt. (A working example is included in the README file.)\n"
-"\n"
-"date: 2011-03-01 12:06:36 +0000"
+#. summary(texlive-specs-u:texlive-slantsc-doc)
+#, fuzzy
+msgid "Documentation for texlive-slantsc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-slantsc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-slantsc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-slideshow)
+msgid "Generate slideshow with MetaPost"
msgstr ""
-#. description(texlive-tpslifonts)
+#. description(texlive-specs-u:texlive-slideshow)
msgid ""
-"This package aims to improve presentations in terms of font readability, especially with maths. The standard cm math fonts at large design sizes are difficult to read from far away, especially at low resolutions and low contrast color choice. Using this package leads to much better overall readability of some font combinations. The package offers a couple of 'harmonising' combinations of text and math fonts from the (distant) relatives of computer modern fonts, with a couple of extras for optimising readability. Text fonts from computer modern roman, computer modern sans serif, SliTeX computer modern sans serif, computer modern bright, or concrete roman are available, in addition to math fonts from computer modern math, computer modern bright math, or Euler fonts. The package is part of the TeXPower bundle.\n"
+"The package provides a means of creating presentations in MetaPost, without intervention from other utilities (except a distiller). Such an arrangement has its advantages (though there are disadvantages too).\n"
"\n"
-"date: 2012-04-27 15:14:22 +0000"
+"date: 2012-05-28 09:32:41 +0000"
msgstr ""
-#. description(texlive-minipage-marginpar)
+#. summary(texlive-specs-u:texlive-slideshow-doc)
+#, fuzzy
+msgid "Documentation for texlive-slideshow"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-slideshow-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-slideshow"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-smalltableof)
+msgid "Create listoffigures etc. in a single chapter"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-smalltableof)
msgid ""
-"This package allows \\marginpar-commands inside of minipages and other boxes. (It takes another approach than marginnote by Markus Kohm: it saves all \\marginpar-commands and typesets them outside (i.e., after) the box.) The package defines an environment minipagewithmarginpars (to be used like minipage)-- and the internal commands may be used by other packages to define similar environments or commands.\n"
+"The package allows you to create a list of figures and list of tables in a chapter named 'List' that contains separate sections for each list of figures, tables, etc.\n"
"\n"
-"date: 2008-04-09 14:44:20 +0000"
+"date: 2013-01-17 10:26:53 +0000"
msgstr ""
-#. description(texlive-progressbar)
+#. summary(texlive-specs-u:texlive-smalltableof-doc)
+#, fuzzy
+msgid "Documentation for texlive-smalltableof"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-smalltableof-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-smalltableof"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-smartdiagram)
+msgid "Generate diagrams from lists"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-smartdiagram)
msgid ""
-"This package allows you to easily visualize shares of total amounts in the form of a bar. So basically you can convert any number between 0 and 1 to a progressbar using the command \\progressbar{<number>}. Also a lot of customizations are possible, allowing you to create an unique progressbar on your own. The package uses TikZ to produce its graphics.\n"
+"The package will create 'smart' diagrams from lists of items, for simple documents and for presentations.\n"
"\n"
-"date: 2013-01-06 17:12:17 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-localloc)
+#. summary(texlive-specs-u:texlive-smartdiagram-doc)
+msgid "Documentation for texlive-smartdiagram"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-smartdiagram-doc)
+msgid "This package includes the documentation for texlive-smartdiagram"
+msgstr ""
+
+#. summary(texlive-specs-u:texlive-smartref)
+msgid "Extend LaTeX's \\ref capability"
+msgstr ""
+
+#. description(texlive-specs-u:texlive-smartref)
msgid ""
-"This package approaches the problem of the shortage of registers, by providing a mechanism for local allocation. The package works with Plain TeX, LaTeX and LaTeX 2.09.\n"
+"The package extends the LaTeX labelling system: whenever a label is set, the values of counters (selected by the user) are recorded, along with the label. The value of these counters can be recalled with a command similar to \\pageref. The package also adds commands \\s[name]ref (for each counter [name] that the user has selected); these commands display something only if the value of the [name] counter is changed from when the label was set. Many commands are provided to serve as a macro programming environment for using the extended labels.\n"
"\n"
-"date: 2009-10-06 12:55:10 +0000"
+"date: 2012-05-28 10:09:57 +0000"
msgstr ""
-#. description(texlive-prerex)
+#. summary(texlive-specs-u:texlive-smartref-doc)
+#, fuzzy
+msgid "Documentation for texlive-smartref"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-smartref-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-smartref"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-snapshot)
+#, fuzzy
+msgid "List the external dependencies of a LaTeX document"
+msgstr "Tento balík obsahuje správce oken KDE a ikony pro KDE."
+
+#. description(texlive-specs-u:texlive-snapshot)
msgid ""
-"This package consists of prerex.sty, a LaTeX package for producing charts of course nodes linked by arrows representing pre- and co-requisites, and prerex, an interactive program for creating and editing chart descriptions. The implementation of prerex.sty is built on PGF, so that it may be used equally happily with latex or pdflatex; prerex itself is written in C. The package includes source code for a previewer application, a lightweight Qt-4 and poppler-based prerex-enabled PDF viewer.\n"
+"The snapshot package helps the owner of a LaTeX document obtain a list of the external dependencies of the document, in a form that can be embedded at the top of the document. It provides a snapshot of the current processing context of the document, insofar as it can be determined from inside LaTeX. If a document contains such a dependency list, then it becomes possible to arrange that the document be processed always with the same versions of everything, in order to ensure the same output. This could be useful for someone wanting to keep a LaTeX document on hand and consistently reproduce an identical DVI file from it, on the fly; or for someone wanting to shield a document during the final stages of its production cycle from unexpected side effects of routine upgrades to the TeX system.\n"
"\n"
-"date: 2012-08-22 17:18:22 +0000"
+"date: 2012-05-28 10:09:57 +0000"
msgstr ""
-#. description(yast2-installation-control)
-msgid "This package contains RNG schema for validating the installation control files."
+#. summary(texlive-specs-u:texlive-snapshot-doc)
+#, fuzzy
+msgid "Documentation for texlive-snapshot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-snapshot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-snapshot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-snotez)
+msgid "Typeset notes, in the margin"
msgstr ""
-#. description(words:words-british)
+#. description(texlive-specs-u:texlive-snotez)
msgid ""
-"This package contains a British words dictionary which will be installed as\n"
+"The package provides a macro \\sidenote, that places a note in the margin of the document, with its baseline aligned with the baseline in the body of the document. These sidenotes are numbered (both in the text, and on the notes themselves). The package loads the package etoolbox, pgfopts, marginnote and perpage.\n"
"\n"
-"/usr/share/dict/british\n"
-"\n"
-"For a description see the package words."
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(words:words-canadian)
-msgid ""
-"This package contains a Canadian words dictionary which will be installed as\n"
-"\n"
-"/usr/share/dict/canadian\n"
-"\n"
-"For a description see the package words."
+#. summary(texlive-specs-u:texlive-snotez-doc)
+msgid "Documentation for texlive-snotez"
msgstr ""
-#. description(xemacs:xemacs-info)
-msgid "This package contains all info files for XEmacs. All these files can be read online with XEmacs and describe XEmacs and some of its modes."
-msgstr "Tento balíček obsahuje všechny info soubory pro Xemacs. Všechny tyto soubory lze číst přímo Xemacsem a popisují xemacs a některé jeho režimy."
+#. description(texlive-specs-u:texlive-snotez-doc)
+msgid "This package includes the documentation for texlive-snotez"
+msgstr ""
-#. description(xemacs-packages:xemacs-packages-info)
-msgid "This package contains all the info files for the extra packages for XEmacs. All these files can be read online with XEmacs and describe XEmacs and some of its modes."
-msgstr "Tento balíček obsahuje všechny info soubory pro X emacs. Všechno tyto soubory mohou být čteny přímo X-emacsem a popisují xemacs a některé jeho režimy."
+#. summary(texlive-specs-u:texlive-songbook)
+msgid "Package for typesetting song lyrics and chord books"
+msgstr ""
-#. description(texlive-staves)
+#. description(texlive-specs-u:texlive-songbook)
msgid ""
-"This package contains all the necessary tools to typeset the \"magical\" Icelandic staves plus the runic letters used in Iceland. Included are a font in Adobe Type 1 format and LaTeX support.\n"
+"The package provides an all purpose songbook style. Three types of output may be created from a single input file: \"words and chords\" books for the musicians to play from, \"words only\" songbooks for the congregation to sing from, and overhead transparency masters for congregational use. The package will also print a table of contents, an index sorted by title and first line, and an index sorted by key, or by artist/composer. The package attempts to handle songs in multiple keys, as well as songs in multiple languages.\n"
"\n"
-"date: 2008-08-23 13:48:35 +0000"
+"date: 2012-04-22 19:38:25 +0000"
msgstr ""
-#. description(yast2-iscsi-lio-server)
-msgid "This package contains configuration of iSCSI LIO target"
+#. summary(texlive-specs-u:texlive-songbook-doc)
+#, fuzzy
+msgid "Documentation for texlive-songbook"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-songbook-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-songbook"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-songs)
+msgid "Produce song books for church or fellowship"
msgstr ""
-#. description(vsqlite++:vsqlite++-doc)
-msgid "This package contains development documentation files for vsqlite++."
+#. description(texlive-specs-u:texlive-songs)
+msgid ""
+"The package provides a means of producing beautiful song books for church or fellowship. It offers: a very easy chord-entry syntax; multiple modes (words-only; words+chords; slides; handouts); measure bars; guitar tablatures; automatic transposition; scripture quotations; multiple indexes (sorted by title, author, important lyrics, or scripture references); and projector-style output generation, for interactive use. A set of example documents is provided.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(yast2-instserver:yast2-instserver-devel-doc)
-msgid "This package contains development documentation for using the API provided by this package."
+#. summary(texlive-specs-u:texlive-songs-doc)
+msgid "Documentation for texlive-songs"
msgstr ""
-#. description(yast2-add-on:yast2-add-on-devel-doc)
-msgid "This package contains development documentation for using the API provided by yast2-add-on package."
+#. description(texlive-specs-u:texlive-songs-doc)
+msgid "This package includes the documentation for texlive-songs"
msgstr ""
-#. description(yast2-ntp-client:yast2-ntp-client-devel-doc)
-msgid "This package contains development documentation for using the API provided by yast2-ntp-client package."
+#. summary(texlive-specs-u:texlive-sort-by-letters)
+msgid "Bibliography styles for alphabetic sorting"
msgstr ""
-#. description(yast2-sysconfig:yast2-sysconfig-devel-doc)
-msgid "This package contains development documentation for using the API provided by yast2-sysconfig package."
+#. description(texlive-specs-u:texlive-sort-by-letters)
+msgid ""
+"This bundle contains several bibliography styles for separating a document's references by the first letter of the first author/editor in the bibliography entry. The styles are adapted from standard ones or from natbib ones.\n"
+"\n"
+"date: 2012-06-04 21:25:44 +0000"
msgstr ""
-#. description(vips:vips-doc)
+#. summary(texlive-specs-u:texlive-sort-by-letters-doc)
#, fuzzy
-#| msgid "This package contains [pkg://wxGTK] documentation in HTML and PDF formats."
-msgid "This package contains documentation about VIPS library in HTML and PDF formats."
-msgstr "Tento balíček obsahuje dokumentaci pro [pkg://wxGTK] ve formátech PDF a HTML."
+msgid "Documentation for texlive-sort-by-letters"
+msgstr "Dokumentace pro adaptx"
-#. description(yast2-nis-server:yast2-nis-server-devel-doc)
-msgid "This package contains documentation for yast2-nis-server"
+#. description(texlive-specs-u:texlive-sort-by-letters-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sort-by-letters"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-soton)
+msgid "University of Southampton-compliant slides"
msgstr ""
-#. description(virtualbox:virtualbox-guest-desktop-icons)
-msgid "This package contains icons for guest desktop files that were created on the desktop."
+#. description(texlive-specs-u:texlive-soton)
+msgid ""
+"The bundle contains two packages: soton-palette which defines colour-ways, and soton-beamer, which uses the colours to produce compliant presentations.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(tuned:tuned-utils-systemtap)
-msgid "This package contains several systemtap scripts to allow detailed manual monitoring of the system. Instead of the typical IO/sec it collects minimal, maximal and average time between operations to be able to identify applications that behave power inefficient (many small operations instead of fewer large ones)."
+#. summary(texlive-specs-u:texlive-soton-doc)
+#, fuzzy
+msgid "Documentation for texlive-soton"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-soton-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-soton"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-soul)
+msgid "Hyphenation for letterspacing, underlining, and more"
msgstr ""
-#. description(texlive-koma-script-examples)
+#. description(texlive-specs-u:texlive-soul)
msgid ""
-"This package contains some examples from the 4th edition of the book <<KOMA-Script--Eine Sammlung von Klassen und Paketen fur LaTeX2e>> by Markus Kohm and Jens-Uwe Morawski. There are no further descriptions of these examples.\n"
+"Provides hyphenatable spacing out (letterspacing), underlining, striking out, etc., using the TeX hyphenation algorithm to find the proper hyphens automatically. The package also provides a mechanism that can be used to implement similar tasks, that have to treat text syllable by syllable. This is shown in two examples. The package itself does not support UTF-8 input in ordinary (PDF)LaTeX; some UTF-8 support is offered by package soulutf8\n"
"\n"
-"date: 2013-04-11 20:56:41 +0000"
+"date: 2012-03-12 17:08:07 +0000"
msgstr ""
-#. description(yast2-fcoe-client)
-msgid "This package contains the YaST2 component for the Fibre Channel over Ethernet (FCoE) configuration."
+#. summary(texlive-specs-u:texlive-soul-doc)
+#, fuzzy
+msgid "Documentation for texlive-soul"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-soul-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-soul"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sourcecodepro)
+msgid "Use SourceCodePro with TeX(-alike) systems"
msgstr ""
-#. description(xfce4-icon-theme)
-msgid "This package contains the default icon theme for Xfce desktop environment."
+#. description(texlive-specs-u:texlive-sourcecodepro)
+msgid ""
+"The font is an open-source Monospaced development from Adobe. The package provides fonts (in both Adobe Type 1 and OpenType formats) and macros supporting their use in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF).\n"
+"\n"
+"date: 2014-04-23 16:48:25 +0000"
msgstr ""
-#. description(tidy:tidy-doc)
-msgid "This package contains the documentation for both tidy and libtidy."
+#. summary(texlive-specs-u:texlive-sourcecodepro-doc)
+msgid "Documentation for texlive-sourcecodepro"
msgstr ""
-#. description(tuxpaint-stamps)
-msgid "This package contains the documentation for the 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(texlive-specs-u:texlive-sourcecodepro-doc)
+msgid "This package includes the documentation for texlive-sourcecodepro"
msgstr ""
-#. description(kernel-firmware:ucode-amd)
-msgid "This package contains the microcode files used by AMD CPUs."
+#. summary(texlive-specs-u:texlive-sourcecodepro-fonts)
+msgid "Severed fonts for texlive-sourcecodepro"
msgstr ""
-#. description(tuned:tuned-utils)
-msgid "This package contains utilities that can help you to fine tune your system and manage tuned profiles."
+#. description(texlive-specs-u:texlive-sourcecodepro-fonts)
+msgid "The separated fonts package for texlive-sourcecodepro"
msgstr ""
-#. description(wxWidgets-2_9-docs)
-msgid "This package contains wxWidgets documentation in HTML format."
+#. summary(texlive-specs-u:texlive-sourcesanspro)
+msgid "Use SourceSansPro with TeX(-alike) systems"
msgstr ""
-#. description(texlive-lhelp)
+#. description(texlive-specs-u:texlive-sourcesanspro)
msgid ""
-"This package defines macros which are useful for many documents. It is a large collection of simple 'little helpers' which do not really warrant a separate package on their own. Included are, among other things, definitions of common units with preceeding thinspaces, framed boxes where both width and height can be specified, starting new odd or even pages, draft markers, notes, conditional includes, including EPS files, and versions of enumerate and itemize which allow the horizontal and vertical spacing to be changed.\n"
+"The font is an open-source Sans-Serif development from Adobe. The package provides fonts (in both Adobe Type 1 and OpenType formats) and macros supporting their use in LaTeX (Type 1) and XeLaTeX/LuaLaTeX (OTF).\n"
"\n"
-"date: 2007-01-08 21:21:56 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-subeqnarray)
-msgid ""
-"This package defines the subeqnarray and subeqnarray* environments, which behave like the equivalent eqnarray and eqnarray* environments, except that the individual lines are numbered like 1a, 1b, 1c, etc. To refer to these numbers an extra label command \\slabel is provided.\n"
-"\n"
-"date: 2007-01-02 09:01:06 +0000"
+#. summary(texlive-specs-u:texlive-sourcesanspro-doc)
+msgid "Documentation for texlive-sourcesanspro"
msgstr ""
-#. description(texlive-jurabib)
-msgid ""
-"This package enables automated citation with BibTeX for legal studies and the humanities. In addition, the package provides commands for specifying editors in a commentary in a convenient way. Simplified formatting of the citation as well as the bibliography entry is also provided. It is possible to display the (short) title of a work only if an authors is cited with multiple works. Giving a full citation in the text, conforming to the bibliography entry, is supported. Several options are provided which might be of special interest for those outside legal studies--for instance, displaying multiple full citations. In addition, the format of last names and first names of authors may be changed easily. Cross references to other footnotes are possible. Language dependent handling of bibliography entries is possible by the special language field.\n"
-"\n"
-"date: 2007-01-08 13:12:54 +0000"
+#. description(texlive-specs-u:texlive-sourcesanspro-doc)
+msgid "This package includes the documentation for texlive-sourcesanspro"
msgstr ""
-#. description(texlive-subfloat)
-msgid ""
-"This package enables sub-numbering of floats (figures and tables) similar to the subequations-environment of the amsmath package. The subfloat package is not to be confused with the subfig package which generates sub-figures within one normal figure, and manages their placement; subfloat only affects captions and numbering.\n"
-"\n"
-"date: 2012-05-05 23:06:11 +0000"
+#. summary(texlive-specs-u:texlive-sourcesanspro-fonts)
+msgid "Severed fonts for texlive-sourcesanspro"
msgstr ""
-#. description(texlive-slantsc)
-msgid ""
-"This package enables the use of small capitals in different font shapes, e.g., slanted or bold slanted for all fonts that provide appropriate font shapes. (Note that a separate .fd file is needed to define font shapes such as 'scsl' or 'scit'.)\n"
-"\n"
-"date: 2012-01-02 13:24:13 +0000"
+#. description(texlive-specs-u:texlive-sourcesanspro-fonts)
+msgid "The separated fonts package for texlive-sourcesanspro"
msgstr ""
-#. description(texlive-splitbib)
+#. summary(texlive-specs-u:texlive-spanglish)
+#, fuzzy
+msgid "Simplified Spanish support for Babel"
+msgstr "XML podpora pro castor"
+
+#. description(texlive-specs-u:texlive-spanglish)
msgid ""
-"This package enables you to split a bibliography into several categories and subcategories. It does not depend on BibTeX: any bibliography may be split and reordered.\n"
+"The package provides very simplified (or ultra sloppy) support for Spanish in Babel, mostly as a fallback in case spanish.ldf fails for some reason. The package provides basic support for Spanish hyphenation, captions, date, frenchspacing, indentfirst, symbolic footnotes, enumerations, small caps roman numerals, and a handful of shorthands and Spanish mathematical operators. No options or attributes for customization are provided.\n"
"\n"
-"date: 2007-01-14 23:27:07 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-metalogo)
-msgid ""
-"This package exposes spacing parameters for various TeX logos to the end user, to optimise the logos for different fonts. Written especially for XeLaTeX users.\n"
-"\n"
-"date: 2010-05-29 15:49:59 +0000"
+#. summary(texlive-specs-u:texlive-spanglish-doc)
+#, fuzzy
+msgid "Documentation for texlive-spanglish"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-spanglish-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-spanglish"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-spanish-mx)
+msgid "Typeset Spanish as in Mexico"
msgstr ""
-#. description(texlive-xifthen)
+#. description(texlive-specs-u:texlive-spanish-mx)
msgid ""
-"This package extends the ifthen package by implementing new commands to go within the first argument of \\ifthenelse: to test whether a string is void or not, if a command is defined or equivalent to another. The package also enables use of complex expressions as introduced by the package calc, together with the ability of defining new commands to handle complex tests. The package requires e-TeX features.\n"
+"The bundle provides files to support typesetting of texts in Spanish according to Mexican current practices, using babel. The files merge earlier work on a mexican.ldf, or may be used to define a configuration that will typeset all documents (that request babel's spanish option) to use the Mexican language facilities. (Note that this facility is only available with the recent (version >=4.2b) releases of the Spanish option.)\n"
"\n"
-"date: 2009-05-03 10:26:51 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lipsum)
-msgid ""
-"This package gives you easy access to the Lorem Ipsum dummy text; an option is available to separate the paragraphs of the dummy text into TeX-paragraphs. All the paragraphs are taken with permission from http://lipsum.com/.\n"
-"\n"
-"date: 2011-04-14 22:51:19 +0000"
+#. summary(texlive-specs-u:texlive-spanish-mx-doc)
+#, fuzzy
+msgid "Documentation for texlive-spanish-mx"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-spanish-mx-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-spanish-mx"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-sparklines)
+msgid "Drawing sparklines: intense, simple, wordlike graphics"
msgstr ""
-#. description(texlive-xgreek)
+#. description(texlive-specs-u:texlive-sparklines)
msgid ""
-"This package has been designed so to allow people to typeset Greek language documents using XeLaTeX. And it is released in the hope that people will use it and spot errors, bugs, features so to improve it. Practically, it provides all the capabilities of the greek option of the babel package. The package can be invoked with any of the following options: monotonic (for typesetting modern monotonic Greek), polytonic (for typesetting modern polytonic Greek), and ancient (for typesetting ancient texts). The default option is monotonic. The command \\setlanguage{<lang>} to activate the hyphenation patterns of the language <lang> This, however, can be done only if the format file has not been built with the babel mechanism.\n"
+"Sparklines are intense, simple, wordlike graphics (so named by Edward Tufte). In lieu of a more detailed introduction, Professor Tufte's site has an early release of a chapter on sparklines. A PHP implementation may be found at SourceForge. A sparkline can be added using the sparkline environment. Also, you can add sparkling rectangles for the median and special sparkling dots in red or blue. The package requires pdflatex; sparklines cannot appear in a dvi file. The sparklines package uses pgf, and does not work with pictex.\n"
"\n"
-"date: 2012-04-08 17:39:35 +0000"
+"date: 2012-06-04 21:25:44 +0000"
msgstr ""
-#. description(texlive-volumes)
-msgid ""
-"This package helps you if you want to produce separate printed volumes from one LaTeX document, as well as one comprehensive, \"all-inclusive\" version. It suppresses the part of the table of contents that are not typeset, while counters, definitions, index entries etc. are kept consistent throughout the input file.\n"
-"\n"
-"date: 2007-03-01 20:27:41 +0000"
+#. summary(texlive-specs-u:texlive-sparklines-doc)
+#, fuzzy
+msgid "Documentation for texlive-sparklines"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-u:texlive-sparklines-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-sparklines"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-u:texlive-spath3)
+msgid "Manipulate \"soft paths\" in PGF"
msgstr ""
-#. description(texlive-showlabels)
+#. description(texlive-specs-u:texlive-spath3)
msgid ""
-"This package helps you keep track of all the labels you define, by putting the name of new labels into the margin whenever the \\label command is used. The package allows you to do the same thing for other commands. The only one for which this is obviously useful is the \\cite command, but it's easy to do it for others, such as the \\ref or \\begin commands.\n"
+"The spath3 library provides methods for manipulating the \"soft paths\" of TikZ/PGF. Packaged with it are two TikZ libraries that make use of the methods provided. These are libraries for drawing calligraphic paths and for drawing knot diagrams.\n"
"\n"
-"date: 2009-05-27 22:22:07 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-uebungsblatt)
-msgid ""
-"This package implements a LaTeX class for writing exercise sheets for a lecture. Features: - quick typesetting of exercise sheets or their revisions, - simple user friendly commands, - elegant page formatting, - automatic numbering of exercises and sub-exercises, - the number of the exercise sheet is extracted automatically from the file name, - static information about the lectures and the authors needs to provided at one point only.\n"
-"\n"
-"date: 2008-08-24 12:43:48 +0000"
+#. summary(texlive-specs-u:texlive-spath3-doc)
+msgid "Documentation for texlive-spath3"
msgstr ""
-#. description(texlive-papercdcase)
-msgid ""
-"This package implements a LaTeX style file to produce origami- style folding paper CD cases.\n"
-"\n"
-"date: 2007-03-11 13:35:09 +0000"
+#. description(texlive-specs-u:texlive-spath3-doc)
+msgid "This package includes the documentation for texlive-spath3"
msgstr ""
-#. description(texlive-roundbox)
-msgid ""
-"This package implements a command \\roundbox that can be used, in LaTeX, for producing boxes, framed with rounded corners.\n"
-"\n"
-"date: 2013-04-04 09:28:51 +0000"
+#. summary(texlive-specs-u:texlive-spelling)
+msgid "Support for spell-checking of LuaTeX documents"
msgstr ""
-#. description(texlive-polytable)
+#. description(texlive-specs-u:texlive-spelling)
msgid ""
-"This package implements a variant of tabular-like environments where columns can be given a name and entries can flexibly be placed between arbitrary columns. Complex alignment-based layouts, for example for program code, are possible.\n"
+"The package aids spell-checking of TeX documents compiled with the LuaTeX engine. It can give visual feedback in PDF output similar to WYSIWYG word processors. The package relies on an external spell-checker application to check spelling of a text file and to output a list of bad spellings. The package should work with most spell-checkers, even dumb, TeX-unaware ones.\n"
"\n"
-"date: 2010-11-05 11:43:21 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-proba)
-msgid ""
-"This package includes some of the most often used commands in probability texts, e.g. probability, expectation, variance, etc. It also includes some short commands for set (blackboard) or filtrations (calligraphic). It requires LaTeX2e and the amsfonts package.\n"
-"\n"
-"date: 2009-06-02 12:48:32 +0000"
+#. summary(texlive-specs-u:texlive-spelling-doc)
+msgid "Documentation for texlive-spelling"
msgstr ""
-#. description(zvbi:zvbi-devel-32bit)
-msgid "This package includes the development files for the zvbi library which provides routines to read from raw VBI sampling devices, to demodulate raw to sliced VBI data, and to interpret the data of several popular services."
+#. description(texlive-specs-u:texlive-spelling-doc)
+msgid "This package includes the documentation for texlive-spelling"
msgstr ""
-#. description(texlive-IEEEconf:texlive-IEEEconf-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-IEEEconf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-spie)
+msgid "Support for formatting SPIE Proceedings manuscripts"
+msgstr ""
-#. description(texlive-IEEEtran:texlive-IEEEtran-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-IEEEtran"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-spie)
+msgid ""
+"A class and a BibTeX style are provided.\n"
+"\n"
+"date: 2012-04-22 21:21:05 +0000"
+msgstr ""
-#. description(texlive-SIstyle:texlive-SIstyle-doc)
+#. summary(texlive-specs-u:texlive-spie-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-SIstyle"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-spie"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-SIunits:texlive-SIunits-doc)
+#. description(texlive-specs-u:texlive-spie-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-SIunits"
+msgid "This package includes the documentation for texlive-spie"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-Tabbing:texlive-Tabbing-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-Tabbing"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-splines)
+msgid "MetaPost macros for drawing cubic spline interpolants"
+msgstr ""
-#. description(texlive-icsv:texlive-icsv-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-icsv"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-splines)
+msgid ""
+"This is a small package of macros for creating cubic spline interpolants in MetaPost or Metafont. Given a list of points the macros can produce a closed or a relaxed spline joining them. Given a list of function values y_j at x_j, the result would define the graph of a cubic spline interpolating function y=f(x), which is either periodic or relaxed.\n"
+"\n"
+"date: 2012-07-20 21:43:44 +0000"
+msgstr ""
-#. description(texlive-idxlayout:texlive-idxlayout-doc)
+#. summary(texlive-specs-u:texlive-splines-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-idxlayout"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-splines"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ieeepes:texlive-ieeepes-doc)
+#. description(texlive-specs-u:texlive-splines-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ieeepes"
+msgid "This package includes the documentation for texlive-splines"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ifetex:texlive-ifetex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ifetex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-splitbib)
+msgid "Split and reorder your bibliography"
+msgstr ""
-#. description(texlive-ifluatex:texlive-ifluatex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ifluatex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-splitbib)
+msgid ""
+"This package enables you to split a bibliography into several categories and subcategories. It does not depend on BibTeX: any bibliography may be split and reordered.\n"
+"\n"
+"date: 2012-04-22 21:21:05 +0000"
+msgstr ""
-#. description(texlive-ifmslide:texlive-ifmslide-doc)
+#. summary(texlive-specs-u:texlive-splitbib-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ifmslide"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-splitbib"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ifmtarg:texlive-ifmtarg-doc)
+#. description(texlive-specs-u:texlive-splitbib-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ifmtarg"
+msgid "This package includes the documentation for texlive-splitbib"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ifnextok:texlive-ifnextok-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ifnextok"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-splitindex)
+msgid "Unlimited number of indexes"
+msgstr ""
-#. description(texlive-ifoddpage:texlive-ifoddpage-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ifoddpage"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-splitindex)
+msgid ""
+"SplitIndex consists of a LaTeX package, splitidx, and a small program, splitindex. The package may be used to produce one index or several indexes. Without splitindex (for example, using the index package), the number of indexes is limited by the number of TeX's output streams. But using the program you may use even more than 16 indexes: splitidx outputs only a single file \\jobname.idx and the program splits that file into several raw index files and calls your favorite index processor for each of the files.\n"
+"\n"
+"date: 2013-04-09 09:35:57 +0000"
+msgstr ""
-#. description(texlive-ifplatform:texlive-ifplatform-doc)
+#. summary(texlive-specs-u:texlive-splitindex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ifplatform"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-splitindex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ifsym:texlive-ifsym-doc)
+#. description(texlive-specs-u:texlive-splitindex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ifsym"
+msgid "This package includes the documentation for texlive-splitindex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-iftex:texlive-iftex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-iftex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-spot)
+msgid "Spotlight highlighting for Beamer"
+msgstr ""
-#. description(texlive-ifthenx:texlive-ifthenx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ifthenx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-spot)
+msgid ""
+"The package allows dramatic highlighting of words and phrases by painting shapes around them. It is chiefly intended for use in Beamer presentations, but it can be used in other document classes as well.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-ifxetex:texlive-ifxetex-doc)
+#. summary(texlive-specs-u:texlive-spot-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ifxetex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-spot"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-iitem:texlive-iitem-doc)
+#. description(texlive-specs-u:texlive-spot-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-iitem"
+msgid "This package includes the documentation for texlive-spot"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ijmart:texlive-ijmart-doc)
+#. summary(texlive-specs-u:texlive-spotcolor)
#, fuzzy
-msgid "This package includes the documentation for texlive-ijmart"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Fonts for HLaTeX."
+msgid "Spot colours for pdfLaTeX"
+msgstr "LaTeXová písma."
-#. description(texlive-ijqc:texlive-ijqc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ijqc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-spotcolor)
+msgid ""
+"This package provides procedures for using spot colours in LaTeX documents and the generated pdf files. Predefined templates for PANTONE and HKS colour spaces are included but new ones can easily be defined.\n"
+"\n"
+"date: 2012-04-22 21:21:05 +0000"
+msgstr ""
-#. description(texlive-imac:texlive-imac-doc)
+#. summary(texlive-specs-u:texlive-spotcolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-imac"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-spotcolor"
+msgstr "Dokumentace pro castor"
-#. description(texlive-image-gallery:texlive-image-gallery-doc)
+#. description(texlive-specs-u:texlive-spotcolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-image-gallery"
+msgid "This package includes the documentation for texlive-spotcolor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-imakeidx:texlive-imakeidx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-imakeidx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-spreadtab)
+msgid "Spreadsheet features for LaTeX tabular environments"
+msgstr ""
-#. description(texlive-impnattypo:texlive-impnattypo-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-impnattypo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-spreadtab)
+msgid ""
+"The package allows the user to construct tables in a manner similar to a spreadsheet. The cells of a table have row and column indices and these can be used in formulas to generate values in other cells.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-import:texlive-import-doc)
+#. summary(texlive-specs-u:texlive-spreadtab-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-import"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-spreadtab"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-imsproc:texlive-imsproc-doc)
+#. description(texlive-specs-u:texlive-spreadtab-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-imsproc"
+msgid "This package includes the documentation for texlive-spreadtab"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-imtekda:texlive-imtekda-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-imtekda"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-spverbatim)
+msgid "Allow line breaks within \\verb and verbatim output"
+msgstr ""
-#. description(texlive-incgraph:texlive-incgraph-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-incgraph"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-spverbatim)
+msgid ""
+"LaTeX's \\verb macro treats its argument as an unbreakable unit of text. This can lead to poor typesetting, especially when the argument is long. The spverbatim package provides an \\spverb macro that is analogous to \\verb and an spverbatim environment that is analogous to verbatim with the difference being that \\spverb and spverbatim allow LaTeX to break lines at space characters.\n"
+"\n"
+"date: 2012-07-10 12:38:32 +0000"
+msgstr ""
-#. description(texlive-inconsolata:texlive-inconsolata-doc)
+#. summary(texlive-specs-u:texlive-spverbatim-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-inconsolata"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-spverbatim"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-index:texlive-index-doc)
+#. description(texlive-specs-u:texlive-spverbatim-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-index"
+msgid "This package includes the documentation for texlive-spverbatim"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-initials:texlive-initials-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-initials"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-sr-vorl)
+msgid "Class for Springer books"
+msgstr ""
-#. description(texlive-inlinebib:texlive-inlinebib-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-inlinebib"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-sr-vorl)
+msgid ""
+"The class provides a template for books to be published at Springer Gabler, Vieweg or Springer Research. It may be used to produce monographs in different formats and \"several-authors- books\" fitting the conditions of Springer Gabler, Vieweg and Springer Research.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-inlinedef:texlive-inlinedef-doc)
+#. summary(texlive-specs-u:texlive-sr-vorl-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-inlinedef"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sr-vorl"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-inputtrc:texlive-inputtrc-doc)
+#. description(texlive-specs-u:texlive-sr-vorl-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-inputtrc"
+msgid "This package includes the documentation for texlive-sr-vorl"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-insbox:texlive-insbox-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-insbox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-srbook-mem)
+msgid "Package srbook-mem"
+msgstr "Balíček srbook-mem"
-#. description(texlive-interactiveworkbook:texlive-interactiveworkbook-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-interactiveworkbook"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-srbook-mem)
+msgid "The srbook-mem package"
+msgstr ""
-#. description(texlive-interfaces:texlive-interfaces-doc)
+#. summary(texlive-specs-u:texlive-srbook-mem-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-interfaces"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-srbook-mem"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-interpreter:texlive-interpreter-doc)
+#. description(texlive-specs-u:texlive-srbook-mem-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-interpreter"
+msgid "This package includes the documentation for texlive-srbook-mem"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-interval:texlive-interval-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-interval"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-srcltx)
+msgid "Jump between DVI and TeX files"
+msgstr ""
-#. description(texlive-inversepath:texlive-inversepath-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-inversepath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-srcltx)
+msgid ""
+"Provides a \\special insertion into generated .dvi files allowing one to jump from the .dvi file to the .tex source and back again (given a .dvi viewer that supports this, such as Yap or xdvi version 22.38 or later). This was originally written by Aleksander Simonic, the author of the WinEdt shell.\n"
+"\n"
+"date: 2012-07-10 12:48:34 +0000"
+msgstr ""
-#. description(texlive-invoice:texlive-invoice-doc)
+#. summary(texlive-specs-u:texlive-srcltx-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-invoice"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-srcltx"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ionumbers:texlive-ionumbers-doc)
+#. description(texlive-specs-u:texlive-srcltx-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ionumbers"
+msgid "This package includes the documentation for texlive-srcltx"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-iopart-num:texlive-iopart-num-doc)
+#. summary(texlive-specs-u:texlive-sseq)
#, fuzzy
-msgid "This package includes the documentation for texlive-iopart-num"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Typesetting XML with TeX"
+msgid "Typesetting spectral sequence charts"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-ipaex:texlive-ipaex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ipaex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-sseq)
+msgid ""
+"The package provides commands to draw spectral sequence diagrams, providing facilities for clipping and arranging multiple symbols so that they do not overlap. The package is built using pgf, and shares that systems large demands for TeX system memory. Its geometric commands are based on a turtle graphics model, and control structures such as loops and conditionals are available.\n"
+"\n"
+"date: 2013-09-06 12:59:23 +0000"
+msgstr ""
-#. description(texlive-ipaex-type1:texlive-ipaex-type1-doc)
+#. summary(texlive-specs-u:texlive-sseq-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ipaex-type1"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sseq"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-iso:texlive-iso-doc)
+#. description(texlive-specs-u:texlive-sseq-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-iso"
+msgid "This package includes the documentation for texlive-sseq"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-iso10303:texlive-iso10303-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-iso10303"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-sslides)
+msgid "Slides with headers and footers"
+msgstr ""
-#. description(texlive-isodate:texlive-isodate-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-isodate"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-sslides)
+msgid ""
+"The class provides a variant of the LaTeX standard slides class, in which the user may add headers and footers to the slide.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-isodoc:texlive-isodoc-doc)
+#. summary(texlive-specs-u:texlive-sslides-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-isodoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sslides"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-isomath:texlive-isomath-doc)
+#. description(texlive-specs-u:texlive-sslides-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-isomath"
+msgid "This package includes the documentation for texlive-sslides"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-isonums:texlive-isonums-doc)
+#. summary(texlive-specs-u:texlive-stack)
#, fuzzy
-msgid "This package includes the documentation for texlive-isonums"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Tools to Create and Apply deltarpms"
+msgid "Tools to define and use stacks"
+msgstr "Nástroje na vytváření a aplikaci deltarpm balíčků"
-#. description(texlive-isorot:texlive-isorot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-isorot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stack)
+msgid ""
+"The package provides a small set of commands to implement stacks independently of TeX's own stack. As an example of how the stacks might be used, the documentation offers a small \"relinput\" package that implements the backbone of the import package.\n"
+"\n"
+"date: 2012-07-10 13:21:46 +0000"
+msgstr ""
-#. description(texlive-isotope:texlive-isotope-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-isotope"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stackengine)
+msgid "Highly customised stacking of objects, insets, baseline changes, etcetera"
+msgstr ""
-#. description(texlive-issuulinks:texlive-issuulinks-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-issuulinks"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stackengine)
+msgid ""
+"The package provides a versatile way to stack objects vertically in a variety of customizable ways. A number of useful macros are provided, all of which make use of the stackengine core.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-itnumpar:texlive-itnumpar-doc)
+#. summary(texlive-specs-u:texlive-stackengine-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-itnumpar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stackengine"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-iwhdp:texlive-iwhdp-doc)
+#. description(texlive-specs-u:texlive-stackengine-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-iwhdp"
+msgid "This package includes the documentation for texlive-stackengine"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-iwona:texlive-iwona-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-iwona"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stage)
+msgid "A LaTeX class for stage plays"
+msgstr ""
-#. description(texlive-jablantile:texlive-jablantile-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-jablantile"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stage)
+msgid ""
+"Stage.cls is a LaTeX class for creating plays of any length in a standard manuscript format for production and submission.\n"
+"\n"
+"date: 2012-07-10 13:21:46 +0000"
+msgstr ""
-#. description(texlive-jadetex:texlive-jadetex-doc)
+#. summary(texlive-specs-u:texlive-stage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jadetex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stage"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-jamtimes:texlive-jamtimes-doc)
+#. description(texlive-specs-u:texlive-stage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jamtimes"
+msgid "This package includes the documentation for texlive-stage"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-japanese:texlive-japanese-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-japanese"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-standalone)
+msgid "Compile TeX pictures stand-alone or as part of a document"
+msgstr ""
-#. description(texlive-japanese-otf:texlive-japanese-otf-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-japanese-otf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-standalone)
+msgid ""
+"A class and package is provided which allows TeX pictures or other TeX code to be compiled standalone or as part of a main document. Special support for pictures with beamer overlays is also provided. The package is used in the main document and skips extra preambles in sub-files. The class may be used to simplify the preamble in sub-files. By default the preview package is used to display the code without margins. The behaviour in standalone mode may adjusted using a configuration file standalone.cfg to redefine the standalone environment.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-japanese-otf-uptex:texlive-japanese-otf-uptex-doc)
+#. summary(texlive-specs-u:texlive-standalone-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-japanese-otf-uptex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-standalone"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-jfontmaps:texlive-jfontmaps-doc)
+#. description(texlive-specs-u:texlive-standalone-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jfontmaps"
+msgid "This package includes the documentation for texlive-standalone"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-jknapltx:texlive-jknapltx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-jknapltx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-starfont)
+msgid "The StarFont Sans astrological font"
+msgstr ""
-#. description(texlive-jlabels:texlive-jlabels-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-jlabels"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-starfont)
+msgid ""
+"The package contains StarFontSans and StarFontSerif, two public-domain astrological fonts designed by Anthony I.P. Owen, and the appropriate macros to use them with TeX and LaTeX. The fonts are supplied both in the original TrueType Format and in Adobe Type 1 format.\n"
+"\n"
+"date: 2014-04-23 16:48:25 +0000"
+msgstr ""
-#. description(texlive-jmlr:texlive-jmlr-doc)
+#. summary(texlive-specs-u:texlive-starfont-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jmlr"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-starfont"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-jneurosci:texlive-jneurosci-doc)
+#. description(texlive-specs-u:texlive-starfont-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jneurosci"
+msgid "This package includes the documentation for texlive-starfont"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-jpsj:texlive-jpsj-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-jpsj"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-starfont-fonts)
+msgid "Severed fonts for texlive-starfont"
+msgstr ""
-#. description(texlive-js-misc:texlive-js-misc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-js-misc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-starfont-fonts)
+msgid "The separated fonts package for texlive-starfont"
+msgstr ""
-#. description(texlive-jsclasses:texlive-jsclasses-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-jsclasses"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-startex)
+msgid "An XML-inspired format for student use"
+msgstr ""
-#. description(texlive-junicode:texlive-junicode-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-junicode"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-startex)
+msgid ""
+"A TeX format designed to help students write short reports and essays. It provides the user with a suitable set of commands for such a task. It is also more robust than plain TeX and LaTeX.\n"
+"\n"
+"date: 2012-06-04 20:31:14 +0000"
+msgstr ""
-#. description(texlive-jura:texlive-jura-doc)
+#. summary(texlive-specs-u:texlive-startex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jura"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-startex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-juraabbrev:texlive-juraabbrev-doc)
+#. description(texlive-specs-u:texlive-startex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-juraabbrev"
+msgid "This package includes the documentation for texlive-startex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-jurabib:texlive-jurabib-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-jurabib"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-statex)
+#. summary(texlive-specs-u:texlive-statex2)
+msgid "Statistics style"
+msgstr ""
-#. description(texlive-juramisc:texlive-juramisc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-juramisc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-statex)
+msgid ""
+"A package defining many macros for items of significance in statistical presentations. An updated, but incompatible, version of the package is available: statex2.\n"
+"\n"
+"date: 2012-07-10 13:21:46 +0000"
+msgstr ""
-#. description(texlive-jurarsp:texlive-jurarsp-doc)
+#. summary(texlive-specs-u:texlive-statex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jurarsp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-statex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-jvlisting:texlive-jvlisting-doc)
+#. description(texlive-specs-u:texlive-statex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-jvlisting"
+msgid "This package includes the documentation for texlive-statex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-kantlipsum:texlive-kantlipsum-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-kantlipsum"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-statex2)
+msgid ""
+"The package defines many macros for items of significance in statistical presentations. It represents a syntax-incompatible upgrade of statex.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-karnaugh:texlive-karnaugh-doc)
+#. summary(texlive-specs-u:texlive-statex2-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-karnaugh"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-statex2"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-kastrup:texlive-kastrup-doc)
+#. description(texlive-specs-u:texlive-statex2-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-kastrup"
+msgid "This package includes the documentation for texlive-statex2"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-kdgdocs:texlive-kdgdocs-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-kdgdocs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-statistik)
+msgid "Store statistics of a document"
+msgstr ""
-#. description(texlive-kerkis:texlive-kerkis-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-kerkis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-statistik)
+msgid ""
+"The package counts the numbers of pages per chapter, and stores the results in a separate file; the format of the file is selectable.\n"
+"\n"
+"date: 2012-02-20 11:52:09 +0000"
+msgstr ""
-#. description(texlive-kerntest:texlive-kerntest-doc)
+#. summary(texlive-specs-u:texlive-statistik-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-kerntest"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-statistik"
+msgstr "Dokumentace pro castor"
-#. description(texlive-keycommand:texlive-keycommand-doc)
+#. description(texlive-specs-u:texlive-statistik-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-keycommand"
+msgid "This package includes the documentation for texlive-statistik"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-keyreader:texlive-keyreader-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-keyreader"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-staves)
+msgid "Typeset Icelandic staves and runic letters"
+msgstr ""
-#. description(texlive-keystroke:texlive-keystroke-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-keystroke"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-staves)
+msgid ""
+"This package contains all the necessary tools to typeset the \"magical\" Icelandic staves plus the runic letters used in Iceland. Included are a font in Adobe Type 1 format and LaTeX support.\n"
+"\n"
+"date: 2014-04-23 16:48:25 +0000"
+msgstr ""
-#. description(texlive-keyval2e:texlive-keyval2e-doc)
+#. summary(texlive-specs-u:texlive-staves-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-keyval2e"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-staves"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-kix:texlive-kix-doc)
+#. description(texlive-specs-u:texlive-staves-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-kix"
+msgid "This package includes the documentation for texlive-staves"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-kixfont:texlive-kixfont-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-kixfont"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-staves-fonts)
+msgid "Severed fonts for texlive-staves"
+msgstr ""
-#. description(texlive-kluwer:texlive-kluwer-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-kluwer"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-staves-fonts)
+msgid "The separated fonts package for texlive-staves"
+msgstr ""
-#. description(texlive-knitting:texlive-knitting-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-knitting"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stdclsdv)
+msgid "Provide sectioning information for package writers"
+msgstr ""
-#. description(texlive-knittingpattern:texlive-knittingpattern-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-knittingpattern"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stdclsdv)
+msgid ""
+"The stdclsdv package is designed for package writers who need to know what sectioning divsions are provided by the document's class. It also provides a version of \\CheckCommand that sets a flag rather than printing a warning.\n"
+"\n"
+"date: 2012-07-10 13:21:46 +0000"
+msgstr ""
-#. description(texlive-knuth:texlive-knuth-doc)
+#. summary(texlive-specs-u:texlive-stdclsdv-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-knuth"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stdclsdv"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-koma-moderncvclassic:texlive-koma-moderncvclassic-doc)
+#. description(texlive-specs-u:texlive-stdclsdv-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-koma-moderncvclassic"
+msgid "This package includes the documentation for texlive-stdclsdv"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-koma-script:texlive-koma-script-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-koma-script"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stdpage)
+msgid "Standard pages with n lines of at most m characters each"
+msgstr ""
-#. description(texlive-koma-script-sfs:texlive-koma-script-sfs-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-koma-script-sfs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stdpage)
+msgid ""
+"For translations, proofreading, journal contributions etc. standard pages are used. Those standard pages consist of a fixed number of lines and characters per line. This package produces pages with n lines of at most m characters each. For instance the German \"Normseite\": 60 lines of 30 characters each.\n"
+"\n"
+"date: 2012-07-10 13:51:55 +0000"
+msgstr ""
-#. description(texlive-kpathsea:texlive-kpathsea-doc)
+#. summary(texlive-specs-u:texlive-stdpage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-kpathsea"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stdpage"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-kpfonts:texlive-kpfonts-doc)
+#. description(texlive-specs-u:texlive-stdpage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-kpfonts"
+msgid "This package includes the documentation for texlive-stdpage"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ktv-texdata:texlive-ktv-texdata-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ktv-texdata"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-steinmetz)
+msgid "Print Steinmetz notation"
+msgstr ""
-#. description(texlive-kurier:texlive-kurier-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-kurier"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-steinmetz)
+msgid ""
+"The steinmetz package provides a command for typesetting complex numbers in the Steinmetz notation used in electrotechnics as: <modulus>;<argument or phase inside an angle symbol> The package makes use of pict2e.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-l3experimental:texlive-l3experimental-doc)
+#. summary(texlive-specs-u:texlive-steinmetz-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-l3experimental"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-steinmetz"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-l3kernel:texlive-l3kernel-doc)
+#. description(texlive-specs-u:texlive-steinmetz-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-l3kernel"
+msgid "This package includes the documentation for texlive-steinmetz"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-l3packages:texlive-l3packages-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-l3packages"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stellenbosch)
+msgid "Stellenbosch thesis bundle"
+msgstr ""
-#. description(texlive-labbook:texlive-labbook-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-labbook"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stellenbosch)
+msgid ""
+"The usthesis class/style files are provided to typeset reports, theses and dissertations that conform to the requirements of the Engineering Faculty of the University of Stellenbosch. The class file usthesis.cls is based on the standard LaTeX book class, while usthesis.sty is a style file to be loaded on top of the very powerful memoir class. Both options give identical output, but the benefit of the using memoir is that it has many additional command and environments for formatting and processing of a document. Usthesis is primarily concerned with the formatting of the front matter such as the title page, abstract, etc. and a decent page layout on A4 paper. It also works together with the babel package to provide language options to typeset documents in Afrikaans or in English. Additional packages are provided for bibliographic matter, note title pages, lists of symbols, as well as various graphic files for logos.\n"
+"\n"
+"date: 2012-02-23 15:44:15 +0000"
+msgstr ""
-#. description(texlive-labelcas:texlive-labelcas-doc)
+#. summary(texlive-specs-u:texlive-stellenbosch-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-labelcas"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stellenbosch"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-labels:texlive-labels-doc)
+#. description(texlive-specs-u:texlive-stellenbosch-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-labels"
+msgid "This package includes the documentation for texlive-stellenbosch"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-langcode:texlive-langcode-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-langcode"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stex)
+msgid "An Infrastructure for Semantic Preloading of LaTeX Documents"
+msgstr ""
-#. description(texlive-lapdf:texlive-lapdf-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lapdf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stex)
+msgid ""
+"The sTeX package collection is a version of TeX/LaTeX that allows to markup TeX/LaTeX documents semantically without leaving the document format, essentially turning it into a document format for mathematical knowledge management (MKM).\n"
+"\n"
+"date: 2014-04-30 17:02:32 +0000"
+msgstr ""
-#. description(texlive-lastpage:texlive-lastpage-doc)
+#. summary(texlive-specs-u:texlive-stex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lastpage"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-latex:texlive-latex-doc)
+#. description(texlive-specs-u:texlive-stex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-latex"
+msgid "This package includes the documentation for texlive-stex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-latex-fonts:texlive-latex-fonts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-latex-fonts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stix)
+msgid "OpenType Unicode maths fonts"
+msgstr ""
-#. description(texlive-latex-tds:texlive-latex-tds-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-latex-tds"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stix)
+msgid ""
+"The STIX fonts are a suite of unicode OpenType fonts containing a complete set of mathematical glyphs. The CTAN package is a copy of the fonts' official release, organised as specified by the TeX Directory Structure, for inclusion in standard TeX distributions. A Type 1-only distribution of the fonts is available in the esstix bundle.\n"
+"\n"
+"date: 2014-05-01 07:39:56 +0000"
+msgstr ""
-#. description(texlive-latex2man:texlive-latex2man-doc)
+#. summary(texlive-specs-u:texlive-stix-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-latex2man"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stix"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-latexdiff:texlive-latexdiff-doc)
+#. description(texlive-specs-u:texlive-stix-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-latexdiff"
+msgid "This package includes the documentation for texlive-stix"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-latexfileinfo-pkgs:texlive-latexfileinfo-pkgs-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-latexfileinfo-pkgs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stix-fonts)
+msgid "Severed fonts for texlive-stix"
+msgstr ""
-#. description(texlive-latexfileversion:texlive-latexfileversion-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-latexfileversion"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stix-fonts)
+msgid "The separated fonts package for texlive-stix"
+msgstr ""
-#. description(texlive-latexmk:texlive-latexmk-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-latexmk"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stmaryrd)
+msgid "St Mary Road symbols for theoretical computer science"
+msgstr ""
-#. description(texlive-latexmp:texlive-latexmp-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-latexmp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stmaryrd)
+msgid ""
+"The fonts were originally distributed as Metafont sources only, but Adobe Type 1 versions are also now available. Macro support is provided for use under LaTeX; the package supports the \"only\" option (provided by the somedefs package) to restrict what is loaded, for those who don't need the whole font.\n"
+"\n"
+"date: 2014-04-11 10:20:27 +0000"
+msgstr ""
-#. description(texlive-latexpand:texlive-latexpand-doc)
+#. summary(texlive-specs-u:texlive-stmaryrd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-latexpand"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stmaryrd"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lato:texlive-lato-doc)
+#. description(texlive-specs-u:texlive-stmaryrd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lato"
+msgid "This package includes the documentation for texlive-stmaryrd"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-layaureo:texlive-layaureo-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-layaureo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stmaryrd-fonts)
+msgid "Severed fonts for texlive-stmaryrd"
+msgstr ""
-#. description(texlive-layouts:texlive-layouts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-layouts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stmaryrd-fonts)
+msgid "The separated fonts package for texlive-stmaryrd"
+msgstr ""
-#. description(texlive-lazylist:texlive-lazylist-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lazylist"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-storebox)
+msgid "Storing information for reuse"
+msgstr ""
-#. description(texlive-lcd:texlive-lcd-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lcd"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-storebox)
+msgid ""
+"The package provides \"store boxes\" whose user interface matches that of normal LaTeX \"save boxes\", except that the content of a store box appears at most once in the output PDF file, however often it is used. The present version of the package supports pdfLaTeX and LuaLaTeX; when DVI is output, store boxes behave the same as save boxes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-lcg:texlive-lcg-doc)
+#. summary(texlive-specs-u:texlive-storebox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lcg"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-storebox"
+msgstr "Dokumentace pro castor"
-#. description(texlive-lcyw:texlive-lcyw-doc)
+#. description(texlive-specs-u:texlive-storebox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lcyw"
+msgid "This package includes the documentation for texlive-storebox"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-leading:texlive-leading-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-leading"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-storecmd)
+msgid "Store the name of a defined command in a container"
+msgstr ""
-#. description(texlive-leaflet:texlive-leaflet-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-leaflet"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-storecmd)
+msgid ""
+"The package provides macros for command definition that save the name of the command being defined in a file or a macro container. The list could be useful for spelling exceptions in text editors that do not support TeX syntax.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-lecturer:texlive-lecturer-doc)
+#. summary(texlive-specs-u:texlive-storecmd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lecturer"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-storecmd"
+msgstr "Dokumentace pro castor"
-#. description(texlive-ledmac:texlive-ledmac-doc)
+#. description(texlive-specs-u:texlive-storecmd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ledmac"
+msgid "This package includes the documentation for texlive-storecmd"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-leftidx:texlive-leftidx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-leftidx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-stringstrings)
+msgid "String manipulation for cosmetic and programming application"
+msgstr ""
-#. description(texlive-leipzig:texlive-leipzig-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-leipzig"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-stringstrings)
+msgid ""
+"The package provides a large and sundry set of macros for the manipulation of strings. The macros are developed not merely for cosmetic application (such as changing the case of letters and string substitution), but also for programming applications such as character look-ahead, argument parsing, conditional tests on various string conditions, etc. The macros were designed all to be expandable (note that things such as \\uppercase and \\lowercase are not expandable), so that the macros may be strung together sequentially and nested (after a fashion) to achieve rather complex manipulations.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-lettre:texlive-lettre-doc)
+#. summary(texlive-specs-u:texlive-stringstrings-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lettre"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stringstrings"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lettrine:texlive-lettrine-doc)
+#. description(texlive-specs-u:texlive-stringstrings-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lettrine"
+msgid "This package includes the documentation for texlive-stringstrings"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-levy:texlive-levy-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-levy"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-u:texlive-struktex)
+msgid "Draw Nassi-Schneidermann charts"
+msgstr ""
-#. description(texlive-lewis:texlive-lewis-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lewis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-struktex)
+msgid ""
+"Even in the age of OOP one must develop algorithms. Nassi- Shneiderman diagrams are a well known tool to describe an algorithm in a graphical way. The package offers some macros for generating those diagrams in a LaTeX document. The package provides the most important elements of a Nassi-Shneiderman diagram, including processing blocks, loops, mapping conventions for alternatives, etc. Diagrams are drawn using the picture environment (using pict2e for preference).\n"
+"\n"
+"date: 2012-04-11 09:11:10 +0000"
+msgstr ""
-#. description(texlive-lexikon:texlive-lexikon-doc)
+#. summary(texlive-specs-u:texlive-struktex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lexikon"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-struktex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lfb:texlive-lfb-doc)
+#. description(texlive-specs-u:texlive-struktex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lfb"
+msgid "This package includes the documentation for texlive-struktex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lgreek:texlive-lgreek-doc)
+#. summary(texlive-specs-u:texlive-sttools)
#, fuzzy
-msgid "This package includes the documentation for texlive-lgreek"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Various ALSA Tools"
+msgid "Various macros"
+msgstr "Různé nástroje pro ALSA"
-#. description(texlive-lgrx:texlive-lgrx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lgrx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-u:texlive-sttools)
+msgid ""
+"A collection of tools and macros, providing: miscellaneous float control, page styles for floats, multipage tabulars, even columns at end of twocolumn region, switching between one- and two-column anywhere, getting more mileage from \\marginpar, simulating the effect of \"midfloats\", a package to manipulate numerical lists and arrays.\n"
+"\n"
+"date: 2014-04-24 15:19:19 +0000"
+msgstr ""
-#. description(texlive-lh:texlive-lh-doc)
+#. summary(texlive-specs-u:texlive-sttools-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lh"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sttools"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lhelp:texlive-lhelp-doc)
+#. description(texlive-specs-u:texlive-sttools-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lhelp"
+msgid "This package includes the documentation for texlive-sttools"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-libertine:texlive-libertine-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-libertine"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-stubs)
+msgid "Create tear-off stubs at the bottom of a page"
+msgstr ""
-#. description(texlive-libgreek:texlive-libgreek-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-libgreek"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-stubs)
+msgid ""
+"The \\stubs command creates as many repetitions as possible of its argument, at the bottom of the page; these stubs may be used (for example) for contact information.\n"
+"\n"
+"date: 2012-05-27 19:37:20 +0000"
+msgstr ""
-#. description(texlive-librarian:texlive-librarian-doc)
+#. summary(texlive-specs-v:texlive-stubs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-librarian"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-stubs"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-librebaskerville:texlive-librebaskerville-doc)
+#. description(texlive-specs-v:texlive-stubs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-librebaskerville"
+msgid "This package includes the documentation for texlive-stubs"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-libris:texlive-libris-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-libris"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-sty2dtx)
+msgid "Create a .dtx file from a .sty file"
+msgstr ""
-#. description(texlive-linearA:texlive-linearA-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-linearA"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-sty2dtx)
+msgid ""
+"The package provides a Perl script that converts a .sty file (LaTeX package) to .dtx format (documented LaTeX source), by surrounding macro definitions with macro and macrocode environments. The macro name is automatically inserted as an argument to the macro environemnt. Code lines outside macro definitions are wrapped only in macrocode environments. Empty lines are removed. The script should not be thought to be fool proof and 100% accurate but rather as a good start to the business of making a .dtx file from an undocumented style file. Full .dtx files are generated. A template based on the skeleton file from 'dtxtut' is used. User level macros are added automatically to the 'Usage' section of the .dtx file. A corresponding .ins file can be generated as well.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-linegoal:texlive-linegoal-doc)
+#. summary(texlive-specs-v:texlive-sty2dtx-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-linegoal"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sty2dtx"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lineno:texlive-lineno-doc)
+#. description(texlive-specs-v:texlive-sty2dtx-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lineno"
+msgid "This package includes the documentation for texlive-sty2dtx"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-linguex:texlive-linguex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-linguex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-suanpan)
+msgid "MetaPost macros for drawing Chinese and Japanese abaci"
+msgstr ""
-#. description(texlive-lipsum:texlive-lipsum-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lipsum"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-suanpan)
+msgid ""
+"These macros are described in Denis Roegel: MetaPost macros for drawing Chinese and Japanese abaci, TUGboat (volume 30, number 1, 2009, pages 74-79)\n"
+"\n"
+"date: 2012-05-27 19:37:20 +0000"
+msgstr ""
-#. description(texlive-lisp-on-tex:texlive-lisp-on-tex-doc)
+#. summary(texlive-specs-v:texlive-suanpan-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lisp-on-tex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-suanpan"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-listbib:texlive-listbib-doc)
+#. description(texlive-specs-v:texlive-suanpan-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-listbib"
+msgid "This package includes the documentation for texlive-suanpan"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-listing:texlive-listing-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-listing"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subdepth)
+msgid "Unify maths subscript height"
+msgstr ""
-#. description(texlive-listings:texlive-listings-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-listings"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subdepth)
+msgid ""
+"This package is based on code (posted long ago to comp.text.tex by Donald Arseneau) to equalise the height of subscripts in maths. The default behaviour is to place subscripts slightly lower when there is a superscript as well, but this can look odd in some situations.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-listings-ext:texlive-listings-ext-doc)
+#. summary(texlive-specs-v:texlive-subdepth-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-listings-ext"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subdepth"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-listliketab:texlive-listliketab-doc)
+#. description(texlive-specs-v:texlive-subdepth-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-listliketab"
+msgid "This package includes the documentation for texlive-subdepth"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-listofsymbols:texlive-listofsymbols-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-listofsymbols"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subeqn)
+msgid "Package for subequation numbering"
+msgstr ""
-#. description(texlive-lithuanian:texlive-lithuanian-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lithuanian"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subeqn)
+msgid ""
+"Sometimes it is necessary to be able to refer to subexpressions of an equation. In order to do that these subexpressions should be numbered. In standard LaTeX there is no provision for this. To solve this problem Stephen Gildea once wrote subeqn.sty for LaTeX 2.09; Donald Arsenau rewrote the macros and Johannes Braams made them available for LaTeX2e. Note that this package is not compatible with the package subeqnarray (written by Johannes Braams), but it can be used together with the LaTeX class options leqno and fleqn.\n"
+"\n"
+"date: 2012-05-27 19:37:20 +0000"
+msgstr ""
-#. description(texlive-liturg:texlive-liturg-doc)
+#. summary(texlive-specs-v:texlive-subeqn-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-liturg"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subeqn"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-lkproof:texlive-lkproof-doc)
+#. description(texlive-specs-v:texlive-subeqn-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lkproof"
+msgid "This package includes the documentation for texlive-subeqn"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lm:texlive-lm-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lm"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subeqnarray)
+msgid "Equation array with sub numbering"
+msgstr ""
-#. description(texlive-lm-math:texlive-lm-math-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lm-math"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subeqnarray)
+msgid ""
+"This package defines the subeqnarray and subeqnarray* environments, which behave like the corresponding eqnarray and eqnarray* environments, except that the individual lines are numbered like 1a, 1b, 1c, etc. To refer to these numbers an extra label command \\slabel is provided. Users are urged to consider the alignment capabilities of the amsmath bundle, which produce better results than eqnarray-related macros.\n"
+"\n"
+"date: 2012-05-27 19:37:20 +0000"
+msgstr ""
-#. description(texlive-lmake:texlive-lmake-doc)
+#. summary(texlive-specs-v:texlive-subeqnarray-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lmake"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subeqnarray"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-locality:texlive-locality-doc)
+#. description(texlive-specs-v:texlive-subeqnarray-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-locality"
+msgid "This package includes the documentation for texlive-subeqnarray"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-localloc:texlive-localloc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-localloc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subfig)
+msgid "Figures broken into subfigures"
+msgstr ""
-#. description(texlive-logbox:texlive-logbox-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-logbox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subfig)
+msgid ""
+"The package provides support for the manipulation and reference of small or 'sub' figures and tables within a single figure or table environment. It is convenient to use this package when your subfigures are to be separately captioned, referenced, or are to be included in the List-of-Figures. A new \\subfigure command is introduced which can be used inside a figure environment for each subfigure. An optional first argument is used as the caption for that subfigure. This package supersedes the subfigure package (which is no longer maintained). The name was changed since the package is completely backward compatible with the older package The major advantage to the new package is that the user interface is keyword/value driven and easier to use. To ease the transition from the subfigure package, the distribution it includes a configuration file (subfig.cfg) which nearly emulates the subfigure package. The functionality of the package is provided by the (more recent still) subcaption
package.\n"
+"\n"
+"date: 2014-03-31 09:43:09 +0000"
+msgstr ""
-#. description(texlive-logical-markup-utils:texlive-logical-markup-utils-doc)
+#. summary(texlive-specs-v:texlive-subfig-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-logical-markup-utils"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subfig"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-logicpuzzle:texlive-logicpuzzle-doc)
+#. description(texlive-specs-v:texlive-subfig-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-logicpuzzle"
+msgid "This package includes the documentation for texlive-subfig"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-logpap:texlive-logpap-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-logpap"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subfigmat)
+msgid "Automates layout when using the subfigure package"
+msgstr ""
-#. description(texlive-logreq:texlive-logreq-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-logreq"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subfigmat)
+msgid ""
+"Defines an array/matrix-type environment that is used with the subfigure package to automate the placement of subfigures (or tables or text). The subfigures are placed left-to-right, top- to-bottom.\n"
+"\n"
+"date: 2012-05-27 19:37:20 +0000"
+msgstr ""
-#. description(texlive-longnamefilelist:texlive-longnamefilelist-doc)
+#. summary(texlive-specs-v:texlive-subfigmat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-longnamefilelist"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subfigmat"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-loops:texlive-loops-doc)
+#. description(texlive-specs-v:texlive-subfigmat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-loops"
+msgid "This package includes the documentation for texlive-subfigmat"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lpic:texlive-lpic-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lpic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subfigure)
+msgid "Deprecated: Figures divided into subfigures"
+msgstr ""
-#. description(texlive-lps:texlive-lps-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lps"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subfigure)
+msgid ""
+"Provides support for the manipulation and reference of small or 'sub' figures and tables within a single figure or table environment. It is convenient to use this package when your subfigures are to be separately captioned, referenced, or are to be included in the List-of-Figures. A new \\subfigure command is introduced which can be used inside a figure environment for each subfigure. An optional first argument is used as the caption for that subfigure. The package is now considered obsolete: it was superseded by subfig, but users may find the more recent subcaption package more satisfactory.\n"
+"\n"
+"date: 2013-01-31 16:58:59 +0000"
+msgstr ""
-#. description(texlive-lsc:texlive-lsc-doc)
+#. summary(texlive-specs-v:texlive-subfigure-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lsc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subfigure"
+msgstr "Dokumentace pro castor"
-#. description(texlive-lstaddons:texlive-lstaddons-doc)
+#. description(texlive-specs-v:texlive-subfigure-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lstaddons"
+msgid "This package includes the documentation for texlive-subfigure"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ltablex:texlive-ltablex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ltablex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subfiles)
+msgid "Individual typesetting of subfiles of a \"main\" document"
+msgstr ""
-#. description(texlive-ltabptch:texlive-ltabptch-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ltabptch"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subfiles)
+msgid ""
+"Using subfiles the user can handle multi-file projects more comfortably making it possible to both process the subsidiary files by themselves and to process the main file that includes them, without making any changes to either.\n"
+"\n"
+"date: 2012-07-09 11:08:44 +0000"
+msgstr ""
-#. description(texlive-ltxdockit:texlive-ltxdockit-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ltxdockit"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subfiles-doc)
+msgid "Documentation for texlive-subfiles"
+msgstr ""
-#. description(texlive-ltxfileinfo:texlive-ltxfileinfo-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ltxfileinfo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subfiles-doc)
+msgid "This package includes the documentation for texlive-subfiles"
+msgstr ""
-#. description(texlive-ltxindex:texlive-ltxindex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ltxindex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subfloat)
+msgid "Sub-numbering for figures and tables"
+msgstr ""
-#. description(texlive-ltxkeys:texlive-ltxkeys-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ltxkeys"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subfloat)
+msgid ""
+"This package enables sub-numbering of floats (figures and tables) similar to the subequations-environment of the amsmath package. The subfloat package is not to be confused with the subfig package which generates sub-figures within one normal figure, and manages their placement; subfloat only affects captions and numbering.\n"
+"\n"
+"date: 2012-05-05 23:06:11 +0000"
+msgstr ""
-#. description(texlive-ltxnew:texlive-ltxnew-doc)
+#. summary(texlive-specs-v:texlive-subfloat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ltxnew"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subfloat"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ltxtools:texlive-ltxtools-doc)
+#. description(texlive-specs-v:texlive-subfloat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ltxtools"
+msgid "This package includes the documentation for texlive-subfloat"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lua-alt-getopt:texlive-lua-alt-getopt-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lua-alt-getopt"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-substances)
+msgid "A database of chemicals"
+msgstr ""
-#. description(texlive-lua-check-hyphen:texlive-lua-check-hyphen-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lua-check-hyphen"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-substances)
+msgid ""
+"The package provides the means to create a database-like file that contains data of various chemicals. These data may be retrieved in the document; an index of the chemicals mentioned in the document can be created..\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-lua-visual-debug:texlive-lua-visual-debug-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lua-visual-debug"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-substances-doc)
+msgid "Documentation for texlive-substances"
+msgstr ""
-#. description(texlive-lua2dox:texlive-lua2dox-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lua2dox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-substances-doc)
+msgid "This package includes the documentation for texlive-substances"
+msgstr ""
-#. description(texlive-luabibentry:texlive-luabibentry-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luabibentry"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-substitutefont)
+msgid "Easy font substitution"
+msgstr ""
-#. description(texlive-luabidi:texlive-luabidi-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luabidi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-substitutefont)
+msgid ""
+"Many free fonts are extensions of a basic font family with new glyphs or shapes. Such fonts may be given a new name due to licence reasons or to the creator's preference. The package facilitates the task of setting up a font family as substitute for another one, using its \\substitutefont command.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-luacode:texlive-luacode-doc)
+#. summary(texlive-specs-v:texlive-substitutefont-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luacode"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-substitutefont"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-luaindex:texlive-luaindex-doc)
+#. description(texlive-specs-v:texlive-substitutefont-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luaindex"
+msgid "This package includes the documentation for texlive-substitutefont"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-luainputenc:texlive-luainputenc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luainputenc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-substr)
+msgid "Deal with substrings in strings"
+msgstr ""
-#. description(texlive-lualatex-math:texlive-lualatex-math-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lualatex-math"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-substr)
+msgid ""
+"The package provides commands to deal with substrings of strings. Macros are provided to: determine if one string is a substring of another, return the parts of a string before or after a substring, and count the number of occurrences of a substring.\n"
+"\n"
+"date: 2014-01-13 13:38:45 +0000"
+msgstr ""
-#. description(texlive-lualibs:texlive-lualibs-doc)
+#. summary(texlive-specs-v:texlive-substr-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-lualibs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-substr"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-luamplib:texlive-luamplib-doc)
+#. description(texlive-specs-v:texlive-substr-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luamplib"
+msgid "This package includes the documentation for texlive-substr"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-luaotfload:texlive-luaotfload-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luaotfload"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-subsupscripts)
+msgid "A range of sub- and superscript commands"
+msgstr ""
-#. description(texlive-luasseq:texlive-luasseq-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luasseq"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-subsupscripts)
+msgid ""
+"The package provides a comprehensive and flexible set of commands for combinations of left and right sub- and superscripts.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-luatex:texlive-luatex-doc)
+#. summary(texlive-specs-v:texlive-subsupscripts-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luatex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-subsupscripts"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-luatexbase:texlive-luatexbase-doc)
+#. description(texlive-specs-v:texlive-subsupscripts-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luatexbase"
+msgid "This package includes the documentation for texlive-subsupscripts"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-luatexja:texlive-luatexja-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luatexja"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-sudoku)
+msgid "Create sudoku grids"
+msgstr ""
-#. description(texlive-luatexko:texlive-luatexko-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-luatexko"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-sudoku)
+msgid ""
+"The sudoku package provides an environment for typesetting sudoku grids. A sudoku puzzle is a 9x9 grid where some of the squares in the grid contain numbers. The rules are simple: every column can only contain the digits 1 to 9, every row can only contain the digits 1 to 9 and every 3x3 box can only contain the digits 1 to 9. More information, including help and example puzzles, can be found at sudoku.org.uk. This site also has blank sudoku grids (or worksheets), but you will not need to print them from there if you have this package installed.\n"
+"\n"
+"date: 2012-05-27 21:10:31 +0000"
+msgstr ""
-#. description(texlive-luatextra:texlive-luatextra-doc)
+#. summary(texlive-specs-v:texlive-sudoku-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luatextra"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sudoku"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-luaxml:texlive-luaxml-doc)
+#. description(texlive-specs-v:texlive-sudoku-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-luaxml"
+msgid "This package includes the documentation for texlive-sudoku"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-lxfonts:texlive-lxfonts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-lxfonts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-sudokubundle)
+msgid "A set of sudoku-related packages"
+msgstr ""
-#. description(texlive-ly1:texlive-ly1-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ly1"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-sudokubundle)
+msgid ""
+"The bundle provides three packages: printsudoku, which provides a command \\sudoku whose argument is the name of a file containing a puzzle specification; solvesudoku, which attempts to find a solution to the puzzle in the file named in the argument; and createsudoku, which uses the random package to generate a puzzle according to a bunch of parameters that the user sets via macros. The bundle comes with a set of ready- prepared puzzle files.\n"
+"\n"
+"date: 2014-01-13 13:38:45 +0000"
+msgstr ""
-#. description(texlive-m-tx:texlive-m-tx-doc)
+#. summary(texlive-specs-v:texlive-sudokubundle-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-m-tx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sudokubundle"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mafr:texlive-mafr-doc)
+#. description(texlive-specs-v:texlive-sudokubundle-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mafr"
+msgid "This package includes the documentation for texlive-sudokubundle"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-magaz:texlive-magaz-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-magaz"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-suftesi)
+msgid "A document class for typesetting theses, books and articles"
+msgstr ""
-#. description(texlive-mailing:texlive-mailing-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mailing"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-suftesi)
+msgid ""
+"The class is specifically designed for use with theses in the humanities.\n"
+"\n"
+"date: 2014-04-05 10:34:01 +0000"
+msgstr ""
-#. description(texlive-mailmerge:texlive-mailmerge-doc)
+#. summary(texlive-specs-v:texlive-suftesi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mailmerge"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-suftesi"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-makebarcode:texlive-makebarcode-doc)
+#. description(texlive-specs-v:texlive-suftesi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-makebarcode"
+msgid "This package includes the documentation for texlive-suftesi"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-makebox:texlive-makebox-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makebox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-sugconf)
+msgid "SAS(R) user group conference proceedings document class"
+msgstr ""
-#. description(texlive-makecell:texlive-makecell-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makecell"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-sugconf)
+msgid ""
+"The class may be used to typeset articles to be published in the proceedings of SAS(R) User group conferences and workshops. The layout produced by the class is based on that published by SAS Institute (2006).\n"
+"\n"
+"date: 2012-06-04 20:31:14 +0000"
+msgstr ""
-#. description(texlive-makecirc:texlive-makecirc-doc)
+#. summary(texlive-specs-v:texlive-sugconf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-makecirc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sugconf"
+msgstr "Dokumentace pro castor"
-#. description(texlive-makecmds:texlive-makecmds-doc)
+#. description(texlive-specs-v:texlive-sugconf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-makecmds"
+msgid "This package includes the documentation for texlive-sugconf"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-makedtx:texlive-makedtx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makedtx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-superiors)
+msgid "Attach superior figures to a font family"
+msgstr ""
-#. description(texlive-makeglos:texlive-makeglos-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makeglos"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-superiors)
+msgid ""
+"The package allows the attachment of an arbitrary superior figures font to a font family that lacks one. (Superior figures are commonly used as footnote markers.) Two superior figures fonts are provided--one matching Times, the other matching Libertine.\n"
+"\n"
+"date: 2014-04-24 19:17:57 +0000"
+msgstr ""
-#. description(texlive-makeindex:texlive-makeindex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makeindex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-superiors-doc)
+msgid "Documentation for texlive-superiors"
+msgstr ""
-#. description(texlive-makeplot:texlive-makeplot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makeplot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-superiors-doc)
+msgid "This package includes the documentation for texlive-superiors"
+msgstr ""
-#. description(texlive-makeshape:texlive-makeshape-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-makeshape"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-superiors-fonts)
+msgid "Severed fonts for texlive-superiors"
+msgstr ""
-#. description(texlive-mandi:texlive-mandi-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mandi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-superiors-fonts)
+msgid "The separated fonts package for texlive-superiors"
+msgstr ""
-#. description(texlive-manuscript:texlive-manuscript-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-manuscript"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-supertabular)
+msgid "A multi-page tables package"
+msgstr ""
-#. description(texlive-margbib:texlive-margbib-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-margbib"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-supertabular)
+msgid ""
+"The package was a predecessor of longtable; the newer package (designed on quite different principles) is easier to use and more flexible, in many cases, but supertabular retains its usefulness in a few situations where longtable has problems.\n"
+"\n"
+"date: 2011-12-30 15:30:48 +0000"
+msgstr ""
-#. description(texlive-marginfix:texlive-marginfix-doc)
+#. summary(texlive-specs-v:texlive-supertabular-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-marginfix"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-supertabular"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-marginnote:texlive-marginnote-doc)
+#. description(texlive-specs-v:texlive-supertabular-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-marginnote"
+msgid "This package includes the documentation for texlive-supertabular"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-marvosym:texlive-marvosym-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-marvosym"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-susy)
+msgid "Macros for SuperSymmetry-related work"
+msgstr ""
-#. description(texlive-matc3:texlive-matc3-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-matc3"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-susy)
+msgid ""
+"The package provides abbreviations of longer expressions.\n"
+"\n"
+"date: 2012-05-27 21:10:31 +0000"
+msgstr ""
-#. description(texlive-matc3mem:texlive-matc3mem-doc)
+#. summary(texlive-specs-v:texlive-susy-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-matc3mem"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-susy"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-match_parens:texlive-match_parens-doc)
+#. description(texlive-specs-v:texlive-susy-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-match_parens"
+msgid "This package includes the documentation for texlive-susy"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mathabx:texlive-mathabx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathabx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svg)
+msgid "Include and extract SVG pictures using Inkscape"
+msgstr ""
-#. description(texlive-mathabx-type1:texlive-mathabx-type1-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathabx-type1"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svg)
+msgid ""
+"The package provides a command similar to \\includegraphics command of the graphicx package, which enables the inclusion of SVG images using Inkscape. \\includesvg[<options>]{<svg filename>} A variety of options is available, including width, height, and path of the SVG. The image is converted to an appropriate format, using the \\write18 mechanism to execute a shell command, and the package also offers the means of saving a PDF, EPS, or PNG copy of the image, at the same time. The documentation shows an example using an SVG created from the high energy particle physics analysis package ROOT.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mathalfa:texlive-mathalfa-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathalfa"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svg-doc)
+msgid "Documentation for texlive-svg"
+msgstr ""
-#. description(texlive-mathastext:texlive-mathastext-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathastext"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svg-doc)
+msgid "This package includes the documentation for texlive-svg"
+msgstr ""
-#. description(texlive-mathcomp:texlive-mathcomp-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathcomp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svg-inkscape)
+msgid "How to include an SVG image in LaTeX using Inkscape"
+msgstr ""
-#. description(texlive-mathdesign:texlive-mathdesign-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathdesign"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svg-inkscape)
+msgid ""
+"The document demonstrates the use of SVG images in LaTeX documents. Using the \"PDF+LaTeX output\" option of Inkscape, it is possible to include SVG in documents, in which LaTeX typesets the text. This results in uniform text style throughout the document, including text in images; moreover, LaTeX commands may be used in the image's text, providing such things as mathematics and references. The document also describes how to automate the conversion from SVG to PDF+LaTeX using Inkscape.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mathdots:texlive-mathdots-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathdots"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svgcolor)
+msgid "Define SVG named colours"
+msgstr ""
-#. description(texlive-mathexam:texlive-mathexam-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathexam"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svgcolor)
+msgid ""
+"The package defines the W3C Scalable Vector Graphics (SVG) colour names for use with both the color and PSTricks packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mathpazo:texlive-mathpazo-doc)
+#. summary(texlive-specs-v:texlive-svgcolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mathpazo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-svgcolor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mathspec:texlive-mathspec-doc)
+#. description(texlive-specs-v:texlive-svgcolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mathspec"
+msgid "This package includes the documentation for texlive-svgcolor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mathspic:texlive-mathspic-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mathspic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svn)
+#. summary(texlive-specs-v:texlive-svninfo)
+msgid "Typeset Subversion keywords"
+msgstr ""
-#. description(texlive-mattens:texlive-mattens-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mattens"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svn)
+msgid ""
+"The svn package lets you typeset (in LaTeX) the value of Subversion keywords. It is approximately an equivalent to the rcs package, but for Subversion rather than CVS. Details of Subversion (a replacement for CVS) is available from the project's home site.\n"
+"\n"
+"date: 2011-11-11 19:00:31 +0000"
+msgstr ""
-#. description(texlive-maybemath:texlive-maybemath-doc)
+#. summary(texlive-specs-v:texlive-svn-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-maybemath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-svn"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mbenotes:texlive-mbenotes-doc)
+#. description(texlive-specs-v:texlive-svn-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mbenotes"
+msgid "This package includes the documentation for texlive-svn"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mcaption:texlive-mcaption-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mcaption"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svn-multi)
+msgid "Subversion keywords in multi-file LaTeX documents"
+msgstr ""
-#. description(texlive-mceinleger:texlive-mceinleger-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mceinleger"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svn-multi)
+msgid ""
+"This package lets you typeset keywords of the version control system Subversion inside your LaTeX files anywhere you like. Unlike the otherwise similar package svn the use of multiple files for one LaTeX document is well supported. The package uses the author's filehook and currfile packages. The package interacts with an external Perl script, to retrieve information necessary for the required output.\n"
+"\n"
+"date: 2012-05-07 13:25:51 +0000"
+msgstr ""
-#. description(texlive-mcite:texlive-mcite-doc)
+#. summary(texlive-specs-v:texlive-svn-multi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mcite"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-svn-multi"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mciteplus:texlive-mciteplus-doc)
+#. description(texlive-specs-v:texlive-svn-multi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mciteplus"
+msgid "This package includes the documentation for texlive-svn-multi"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mdframed:texlive-mdframed-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mdframed"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-svn-prov)
+msgid "Subversion variants of \\Provides... macros"
+msgstr ""
-#. description(texlive-mdputu:texlive-mdputu-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mdputu"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svn-prov)
+msgid ""
+"The package introduces Subversion variants of the standard LaTeX macros \\ProvidesPackage, \\ProvidesClass and \\ProvidesFile where the file name and date is extracted from Subversion Id keywords. The file name may also be given explicitly as an optional argument.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mdsymbol:texlive-mdsymbol-doc)
+#. summary(texlive-specs-v:texlive-svn-prov-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mdsymbol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-svn-prov"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mdwtools:texlive-mdwtools-doc)
+#. description(texlive-specs-v:texlive-svn-prov-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mdwtools"
+msgid "This package includes the documentation for texlive-svn-prov"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-media9:texlive-media9-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-media9"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-svninfo)
+msgid ""
+"A package for incorporating the values of Subversion keywords into typeset documents. Information about Subversion (a replacement for CVS) is available from http://subversion.tigris.org/\n"
+"\n"
+"date: 2011-11-11 11:03:47 +0000"
+msgstr ""
-#. description(texlive-meetingmins:texlive-meetingmins-doc)
+#. summary(texlive-specs-v:texlive-svninfo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-meetingmins"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-svninfo"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-memexsupp:texlive-memexsupp-doc)
+#. description(texlive-specs-v:texlive-svninfo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-memexsupp"
+msgid "This package includes the documentation for texlive-svninfo"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-memoir:texlive-memoir-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-memoir"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-swebib)
+msgid "Swedish bibliography styles"
+msgstr ""
-#. description(texlive-memory:texlive-memory-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-memory"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-swebib)
+msgid ""
+"The bundle contains Swedish versions of the standard bibliography styles, and of the style plainnat. The styles should be funtionally equivalent to the corresponding original styles, apart from the Swedish translations. The styles do not implement Swedish collation.\n"
+"\n"
+"date: 2012-05-27 21:10:31 +0000"
+msgstr ""
-#. description(texlive-mentis:texlive-mentis-doc)
+#. summary(texlive-specs-v:texlive-swebib-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mentis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-swebib"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-menu:texlive-menu-doc)
+#. description(texlive-specs-v:texlive-swebib-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-menu"
+msgid "This package includes the documentation for texlive-swebib"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-menukeys:texlive-menukeys-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-menukeys"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-swimgraf)
+msgid "Graphical/textual representations of swimming performances"
+msgstr ""
-#. description(texlive-metafont:texlive-metafont-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-metafont"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-swimgraf)
+msgid ""
+"The package provides two macros that produce representations of a swimmer's performances. The user records data in a text file and specifies as arguments of the macros the date range of interest. The macros extract the relevant information from the file and process it: \\swimgraph produces a graph of the times in a single swimming event (specified as an argument), plotting long course and short course times in separate lines. Records and qualifying times, stored in text files, may optionally be included on the graph. \\swimtext produces a written record of the times in all events. Files of current world and Canadian records are included. The package requires the PSTricks and keyval packages. For attractive output it also requires a colour output device.\n"
+"\n"
+"date: 2012-06-11 12:51:53 +0000"
+msgstr ""
-#. description(texlive-metago:texlive-metago-doc)
+#. summary(texlive-specs-v:texlive-swimgraf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-metago"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-swimgraf"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-metalogo:texlive-metalogo-doc)
+#. description(texlive-specs-v:texlive-swimgraf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-metalogo"
+msgid "This package includes the documentation for texlive-swimgraf"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-metaobj:texlive-metaobj-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-metaobj"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-syllogism)
+msgid "Typeset syllogisms in LaTeX"
+msgstr ""
-#. description(texlive-metaplot:texlive-metaplot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-metaplot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-syllogism)
+msgid ""
+"The package provides a simple, configurable, way for neatly typesetting syllogisms and syllogistic-like arguments, composed of two premises and a conclusion.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-metapost:texlive-metapost-doc)
+#. summary(texlive-specs-v:texlive-syllogism-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-metapost"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-syllogism"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-metatex:texlive-metatex-doc)
+#. description(texlive-specs-v:texlive-syllogism-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-metatex"
+msgid "This package includes the documentation for texlive-syllogism"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-metauml:texlive-metauml-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-metauml"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-symbol-fonts)
+msgid "Severed fonts for texlive-symbol"
+msgstr ""
-#. description(texlive-method:texlive-method-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-method"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-symbol-fonts)
+msgid "The separated fonts package for texlive-symbol"
+msgstr ""
-#. description(texlive-metre:texlive-metre-doc)
+#. summary(texlive-specs-v:texlive-sympytexpackage)
#, fuzzy
-msgid "This package includes the documentation for texlive-metre"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Package synctex"
+msgid "Package sympytexpackage"
+msgstr "Balíček synctex"
-#. description(texlive-mex:texlive-mex-doc)
+#. description(texlive-specs-v:texlive-sympytexpackage)
#, fuzzy
-msgid "This package includes the documentation for texlive-mex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Extra packages"
+msgid "The sympytexpackage package"
+msgstr "Dodatečné balíčky"
-#. description(texlive-mf2pt1:texlive-mf2pt1-doc)
+#. summary(texlive-specs-v:texlive-sympytexpackage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mf2pt1"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-sympytexpackage"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mflogo:texlive-mflogo-doc)
+#. description(texlive-specs-v:texlive-sympytexpackage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mflogo"
+msgid "This package includes the documentation for texlive-sympytexpackage"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mfnfss:texlive-mfnfss-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mfnfss"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-synctex)
+msgid "Package synctex"
+msgstr "Balíček synctex"
-#. description(texlive-mfpic:texlive-mfpic-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mfpic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-synctex)
+msgid "The synctex package"
+msgstr ""
-#. description(texlive-mfpic4ode:texlive-mfpic4ode-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mfpic4ode"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-synproof)
+msgid "Easy drawing of syntactic proofs"
+msgstr ""
-#. description(texlive-mftinc:texlive-mftinc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mftinc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-synproof)
+msgid ""
+"The package provides a set of macros based on PSTricks that will enable you to draw syntactic proofs easily (inspired by the Gamut books). Very few commands are needed, however fine tuning of the various parameters (dimensions) can still be achieved through \"key=value\" pairs.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mfware:texlive-mfware-doc)
+#. summary(texlive-specs-v:texlive-synproof-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mfware"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-synproof"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mh:texlive-mh-doc)
+#. description(texlive-specs-v:texlive-synproof-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mh"
+msgid "This package includes the documentation for texlive-synproof"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mhchem:texlive-mhchem-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mhchem"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-syntax)
+msgid "Creation of syntax diagrams"
+msgstr ""
-#. description(texlive-mhequ:texlive-mhequ-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mhequ"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-syntax)
+msgid ""
+"Create syntax diagrams using special environments and commands to represent the diagram structure.\n"
+"\n"
+"date: 2012-01-31 12:03:20 +0000"
+msgstr ""
-#. description(texlive-microtype:texlive-microtype-doc)
+#. summary(texlive-specs-v:texlive-syntax-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-microtype"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-syntax"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-midnight:texlive-midnight-doc)
+#. description(texlive-specs-v:texlive-syntax-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-midnight"
+msgid "This package includes the documentation for texlive-syntax"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-midpage:texlive-midpage-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-midpage"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-syntrace)
+msgid "Labels for tracing in a syntax tree"
+msgstr ""
-#. description(texlive-miller:texlive-miller-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-miller"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-syntrace)
+msgid ""
+"This package adds support for traces in trees created using either the synttree or the qtree package. The package provides two commands (\\traceLabel and \\traceReference) to set and use a trace.\n"
+"\n"
+"date: 2012-06-04 20:31:14 +0000"
+msgstr ""
-#. description(texlive-minibox:texlive-minibox-doc)
+#. summary(texlive-specs-v:texlive-syntrace-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-minibox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-syntrace"
+msgstr "HTML dokumentace pro GNU C Library"
-#. description(texlive-minifp:texlive-minifp-doc)
+#. description(texlive-specs-v:texlive-syntrace-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-minifp"
+msgid "This package includes the documentation for texlive-syntrace"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-minipage-marginpar:texlive-minipage-marginpar-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-minipage-marginpar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-synttree)
+msgid "Typeset syntactic trees"
+msgstr ""
-#. description(texlive-miniplot:texlive-miniplot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-miniplot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-synttree)
+msgid ""
+"A package to typeset syntactic trees such as those used in Chomsky's Generative grammar, based on a description of the structure of the tree.\n"
+"\n"
+"date: 2012-06-11 12:51:53 +0000"
+msgstr ""
-#. description(texlive-minitoc:texlive-minitoc-doc)
+#. summary(texlive-specs-v:texlive-synttree-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-minitoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-synttree"
+msgstr "Dokumentace pro castor"
-#. description(texlive-minted:texlive-minted-doc)
+#. description(texlive-specs-v:texlive-synttree-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-minted"
+msgid "This package includes the documentation for texlive-synttree"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-minutes:texlive-minutes-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-minutes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-systeme)
+msgid "Format systems of equations"
+msgstr ""
-#. description(texlive-mkgrkindex:texlive-mkgrkindex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mkgrkindex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-systeme)
+msgid ""
+"The package allows you to enter systems of equations or inequalities in an intuitive way, and produces typeset output where the terms and signs are aligned vertically. The package works with plain TeX or LaTeX, but e-TeX is required. Cette petite extension permet de saisir des systemes d'equations ou inequations de facon intuitive, et produit un affichage ou les termes et les signes sont alignes verticalement.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mkjobtexmf:texlive-mkjobtexmf-doc)
+#. summary(texlive-specs-v:texlive-systeme-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mkjobtexmf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-systeme"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mkpattern:texlive-mkpattern-doc)
+#. description(texlive-specs-v:texlive-systeme-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mkpattern"
+msgid "This package includes the documentation for texlive-systeme"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mla-paper:texlive-mla-paper-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mla-paper"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-t-angles)
+msgid "Draw tangles, trees, Hopf algebra operations and other pictures"
+msgstr ""
-#. description(texlive-mlist:texlive-mlist-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mlist"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-t-angles)
+msgid ""
+"A LaTeX2e package for drawing tangles, trees, Hopf algebra operations and other pictures. It is based on emTeX or TPIC \\specials. Therefore, it can be used with the most popular drivers, including emTeX drivers, dviwin, xdvi and dvips, and (using some code from ConTeXt) it may also be used with PDFLaTeX.\n"
+"\n"
+"date: 2012-06-21 12:54:52 +0000"
+msgstr ""
-#. description(texlive-mltex:texlive-mltex-doc)
+#. summary(texlive-specs-v:texlive-t-angles-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mltex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-t-angles"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mmap:texlive-mmap-doc)
+#. description(texlive-specs-v:texlive-t-angles-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mmap"
+msgid "This package includes the documentation for texlive-t-angles"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mnotes:texlive-mnotes-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mnotes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-t2)
+msgid "Support for using T2 encoding"
+msgstr ""
-#. description(texlive-mnsymbol:texlive-mnsymbol-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mnsymbol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-t2)
+msgid ""
+"The T2 bundle provides a variety of separate support functions, for using Cyrillic characters in LaTeX: - the mathtext package, for using Cyrillic letters 'transparently' in formulae - the citehack package, for using Cyrillic (or indeed any non-ascii) characters in citation keys; - support for Cyrillic in BibTeX;\n"
+"- support for Cyrillic in Makeindex; and - various items of font support.\n"
+"\n"
+"date: 2012-06-05 12:57:36 +0000"
+msgstr ""
-#. description(texlive-moderncv:texlive-moderncv-doc)
+#. summary(texlive-specs-v:texlive-t2-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-moderncv"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-t2"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-moderntimeline:texlive-moderntimeline-doc)
+#. description(texlive-specs-v:texlive-t2-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-moderntimeline"
+msgid "This package includes the documentation for texlive-t2"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-modiagram:texlive-modiagram-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-modiagram"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabfigures)
+msgid "Maintain vertical alignment of figures"
+msgstr ""
-#. description(texlive-modref:texlive-modref-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-modref"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabfigures)
+msgid ""
+"Knuth designed his original fonts with tabular figures (figures whose width is uniform); this makes some layout problems rather simple. In more recent times, fonts (such as Minion Pro), which offer proportionally spaced figures, are increasingly being used. The package provides mechanisms whereby such proportional figures may still be aligned in tabular style (for example, in the table of contents).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-modroman:texlive-modroman-doc)
+#. summary(texlive-specs-v:texlive-tabfigures-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-modroman"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabfigures"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mongolian-babel:texlive-mongolian-babel-doc)
+#. description(texlive-specs-v:texlive-tabfigures-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mongolian-babel"
+msgid "This package includes the documentation for texlive-tabfigures"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-monofill:texlive-monofill-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-monofill"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tableaux)
+msgid "Construct tables of signs and variations"
+msgstr ""
-#. description(texlive-montex:texlive-montex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-montex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tableaux)
+msgid ""
+"The package uses PStricks; the user may define the width of the table, the number of lines and the height of each line. Placement of labels within the boxes may be absolute, or as a percentage of the width; various other controls are available.\n"
+"\n"
+"date: 2012-04-10 15:31:04 +0000"
+msgstr ""
-#. description(texlive-moreenum:texlive-moreenum-doc)
+#. summary(texlive-specs-v:texlive-tableaux-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-moreenum"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tableaux"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-morefloats:texlive-morefloats-doc)
+#. description(texlive-specs-v:texlive-tableaux-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-morefloats"
+msgid "This package includes the documentation for texlive-tableaux"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-morehype:texlive-morehype-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-morehype"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tablefootnote)
+msgid "Permit footnotes in tables"
+msgstr ""
-#. description(texlive-moresize:texlive-moresize-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-moresize"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tablefootnote)
+msgid ""
+"The package provides the command \\tablefootnote to be used in a table or sidewaystable environment, where \\footnote will not work (and when using \\footnotemark and \\footnotetext, and adjusting the counter as necessary, is too much work).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-moreverb:texlive-moreverb-doc)
+#. summary(texlive-specs-v:texlive-tablefootnote-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-moreverb"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tablefootnote"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-morewrites:texlive-morewrites-doc)
+#. description(texlive-specs-v:texlive-tablefootnote-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-morewrites"
+msgid "This package includes the documentation for texlive-tablefootnote"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-movie15:texlive-movie15-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-movie15"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tableof)
+msgid "Tagging tables of contents"
+msgstr ""
-#. description(texlive-mp3d:texlive-mp3d-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mp3d"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tableof)
+msgid ""
+"The package provides the commands to flag chapters or sections (or anything else destined to become a TOC line). The command \\nexttocwithtags{req1,req2,...}{excl1,excl2,...} specifies which tags are to be required and which ones are to be excluded by the next \\tableofcontents (or equivalent) command. In a document that uses a class where \\tableofcontents may only be used once, the command \\tableoftaggedcontents{req1,req2,...}{excl1,excl2,...} may be used to provide several tables.\n"
+"\n"
+"date: 2013-03-05 13:09:10 +0000"
+msgstr ""
-#. description(texlive-mparhack:texlive-mparhack-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mparhack"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tableof-doc)
+msgid "Documentation for texlive-tableof"
+msgstr ""
-#. description(texlive-mpattern:texlive-mpattern-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mpattern"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tableof-doc)
+msgid "This package includes the documentation for texlive-tableof"
+msgstr ""
-#. description(texlive-mpcolornames:texlive-mpcolornames-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mpcolornames"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tablists)
+msgid "Tabulated lists of short items"
+msgstr ""
-#. description(texlive-mpgraphics:texlive-mpgraphics-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mpgraphics"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tablists)
+msgid ""
+"This package offers environments and commands for one-level and two-level lists of short items (e.g., exercises in textbooks). The environments support optional arguments of item numbering similar to the enumerate or paralist packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mptopdf:texlive-mptopdf-doc)
+#. summary(texlive-specs-v:texlive-tablists-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mptopdf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-tablists"
+msgstr "Dokumentace pro castor"
-#. description(texlive-ms:texlive-ms-doc)
+#. description(texlive-specs-v:texlive-tablists-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ms"
+msgid "This package includes the documentation for texlive-tablists"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-msc:texlive-msc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-msc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tablor)
+msgid "Create tables of signs and of variations"
+msgstr ""
-#. description(texlive-msg:texlive-msg-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-msg"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tablor)
+msgid ""
+"The package allows the user to use the computer algebra system XCAS to generate tables of signs and of variations (the actual plotting of the tables uses the MetaPost macro package tableauVariations). Tables with forbidden regions may be developed using the package. A configuration file permits some configuration of the language to be used in the diagrams. The tablor package requires that shell escape be enabled.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mslapa:texlive-mslapa-doc)
+#. summary(texlive-specs-v:texlive-tablor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mslapa"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tablor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-msu-thesis:texlive-msu-thesis-doc)
+#. description(texlive-specs-v:texlive-tablor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-msu-thesis"
+msgid "This package includes the documentation for texlive-tablor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mtgreek:texlive-mtgreek-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mtgreek"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabls)
+msgid "Better vertical spacing in tables and arrays"
+msgstr ""
-#. description(texlive-multenum:texlive-multenum-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multenum"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabls)
+msgid ""
+"Modifies LaTeX's array and tabular environments to keep text from touching other text or hlines above or below. Several new parameters are defined and some standard macros are re-defined. The package slows down compilation of tables, since each entry is boxed twice.\n"
+"\n"
+"date: 2011-09-27 09:41:05 +0000"
+msgstr ""
-#. description(texlive-multibbl:texlive-multibbl-doc)
+#. summary(texlive-specs-v:texlive-tabls-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-multibbl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabls"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-multibib:texlive-multibib-doc)
+#. description(texlive-specs-v:texlive-tabls-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-multibib"
+msgid "This package includes the documentation for texlive-tabls"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-multibibliography:texlive-multibibliography-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multibibliography"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabriz-thesis)
+msgid "A template for the University of Tabriz"
+msgstr ""
-#. description(texlive-multicap:texlive-multicap-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multicap"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabriz-thesis)
+msgid ""
+"The package offers a document class for typesetting theses and dissertations at the University of Tabriz. The class requires use of XeLaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-multido:texlive-multido-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multido"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabriz-thesis-doc)
+msgid "Documentation for texlive-tabriz-thesis"
+msgstr ""
-#. description(texlive-multienv:texlive-multienv-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multienv"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabriz-thesis-doc)
+msgid "This package includes the documentation for texlive-tabriz-thesis"
+msgstr ""
-#. description(texlive-multiexpand:texlive-multiexpand-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multiexpand"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabstackengine)
+msgid "\"Tabbing\" front-end to stackengine"
+msgstr ""
-#. description(texlive-multiobjective:texlive-multiobjective-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-multiobjective"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabstackengine)
+msgid ""
+"The package provides a front end to the stackengine package, to allow tabbed stacking. In most cases, an existing stackengine command may be prepended with the word \"tabbed\", \"align\" or \"tabular\" to create a new tabbed version of a stacking macro. In addition, hooks in the package's parser, that tabbed strings of data may be parsed, extracted and reconstituted (not requiring use of any stacking constructions).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-multirow:texlive-multirow-doc)
+#. summary(texlive-specs-v:texlive-tabstackengine-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-multirow"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabstackengine"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-munich:texlive-munich-doc)
+#. description(texlive-specs-v:texlive-tabstackengine-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-munich"
+msgid "This package includes the documentation for texlive-tabstackengine"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-musixguit:texlive-musixguit-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-musixguit"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabto-generic)
+#. summary(texlive-specs-v:texlive-tabto-ltx)
+msgid "\"Tab\" to a measured position in the line"
+msgstr ""
-#. description(texlive-musixtex:texlive-musixtex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-musixtex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabto-generic)
+msgid ""
+"\\tabto{<length>} moves the typesetting position to <length> from the left margin of the paragraph. If the typesetting position is already further along, \\tabto starts a new line.\n"
+"\n"
+"date: 2012-06-21 12:54:52 +0000"
+msgstr ""
-#. description(texlive-musixtex-fonts:texlive-musixtex-fonts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-musixtex-fonts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabto-ltx)
+msgid ""
+"\\tabto{<length>} moves the typesetting position to <length> from the left margin of the paragraph. If the typesetting position is already further along, \\tabto starts a new line; the command \\tabto* will move position backwards if necessary, so that previous text may be overwritten. The command \\TabPositions may be used to define a set of tabbing positions, after which the command \\tab advances typesetting position to the next defined 'tab stop'.\n"
+"\n"
+"date: 2013-09-30 13:04:43 +0000"
+msgstr ""
-#. description(texlive-musuos:texlive-musuos-doc)
+#. summary(texlive-specs-v:texlive-tabto-ltx-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-musuos"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabto-ltx"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-muthesis:texlive-muthesis-doc)
+#. description(texlive-specs-v:texlive-tabto-ltx-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-muthesis"
+msgid "This package includes the documentation for texlive-tabto-ltx"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mversion:texlive-mversion-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mversion"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabu)
+msgid "Flexible LaTeX tabulars"
+msgstr ""
-#. description(texlive-mwcls:texlive-mwcls-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mwcls"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabu)
+msgid ""
+"The package provides an environment, tabu, which will make any sort of tabular (that doesn't need to split across pages), and an environment longtabu which provides the facilities of tabu in a modified longtable environment. (Note that this latter offers an enhancement of ltxtable.) The package requires the array package, and needs e-TeX to run (since array.sty is present in every conforming distribution of LaTeX, and since every publicly available LaTeX format is built using e-TeX, the requirements are provided by default on any reasonable system). The package also requires xcolor for coloured rules in tables, and colortbl for coloured cells. The longtabu environment further requires that longtable be loaded. The package itself does not load any of these packages for the user. The tabu environment may be used in place of tabular, tabular* and tabularx environments, as well as the array environment in maths mode. It overloads tabularx's X-column specification, allowing a width spec
ification, alignment (l, r, c and j) and column type indication (p, m and b). \\begin{tabu} to <dimen> specifies a target width, and \\begin{tabu} spread <dimen> enlarges the environment's \"natural\" width.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-mwe:texlive-mwe-doc)
+#. summary(texlive-specs-v:texlive-tabu-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mwe"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabu"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-mxedruli:texlive-mxedruli-doc)
+#. description(texlive-specs-v:texlive-tabu-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mxedruli"
+msgid "This package includes the documentation for texlive-tabu"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-mychemistry:texlive-mychemistry-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mychemistry"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabularborder)
+msgid "Remove excess space at left and right of tabular"
+msgstr ""
-#. description(texlive-mycv:texlive-mycv-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-mycv"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabularborder)
+msgid ""
+"The tabular environment is changed so that the outer \\tabcolseps are compensated and a \\hline has the same length as the text. No @{} is needed.\n"
+"\n"
+"date: 2011-09-27 09:41:05 +0000"
+msgstr ""
-#. description(texlive-mylatexformat:texlive-mylatexformat-doc)
+#. summary(texlive-specs-v:texlive-tabularborder-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-mylatexformat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabularborder"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-nag:texlive-nag-doc)
+#. description(texlive-specs-v:texlive-tabularborder-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nag"
+msgid "This package includes the documentation for texlive-tabularborder"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-nameauth:texlive-nameauth-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nameauth"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabularcalc)
+msgid "Calculate formulas in a tabular environment"
+msgstr ""
-#. description(texlive-namespc:texlive-namespc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-namespc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabularcalc)
+msgid ""
+"Given a list of numbers and one (or more) formulas, the package offers an easy syntax to build a table of values, i.e., a tabular in which the first row contains the list of numbers, and the other rows contain the calculated values of the formulas for each number of the list. The table may be built either horizontally or vertically and is fully customizable.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-nanumtype1:texlive-nanumtype1-doc)
+#. summary(texlive-specs-v:texlive-tabularcalc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nanumtype1"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabularcalc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-natbib:texlive-natbib-doc)
+#. description(texlive-specs-v:texlive-tabularcalc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-natbib"
+msgid "This package includes the documentation for texlive-tabularcalc"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-nath:texlive-nath-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabularew)
+msgid "A variation on the tabular environment"
+msgstr ""
-#. description(texlive-nature:texlive-nature-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nature"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabularew)
+msgid ""
+"The package offers a modification of the tabular environment, which deals with the problem of column heads that are significantly wider than the body of the column.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-navigator:texlive-navigator-doc)
+#. summary(texlive-specs-v:texlive-tabularew-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-navigator"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabularew"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ncclatex:texlive-ncclatex-doc)
+#. description(texlive-specs-v:texlive-tabularew-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ncclatex"
+msgid "This package includes the documentation for texlive-tabularew"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ncctools:texlive-ncctools-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ncctools"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabulars-e)
+msgid "Examples from the book \"Typesetting tables with LaTeX\""
+msgstr ""
-#. description(texlive-nddiss:texlive-nddiss-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nddiss"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabulars-e)
+msgid ""
+"The bundle presents the examples of the book \"Typesetting tables with LaTeX\" (ISBN 978-1-906860-25-7), as standalone documents.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-needspace:texlive-needspace-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-needspace"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabulary)
+msgid "Tabular with variable width columns balanced"
+msgstr ""
-#. description(texlive-newenviron:texlive-newenviron-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-newenviron"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabulary)
+msgid ""
+"The package defines a tabular*-like environment, tabulary, taking a 'total width' argument as well as the column specifications. The environment uses column types L, C, R and J for variable width columns (\\raggedright', \\centering, \\raggedleft, and normally justified). In contrast to tabularx's X columns, the width of each column is weighted according to the natural width of the widest cell in the column.\n"
+"\n"
+"date: 2011-09-27 10:57:53 +0000"
+msgstr ""
-#. description(texlive-newfile:texlive-newfile-doc)
+#. summary(texlive-specs-v:texlive-tabulary-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-newfile"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabulary"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-newlfm:texlive-newlfm-doc)
+#. description(texlive-specs-v:texlive-tabulary-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-newlfm"
+msgid "This package includes the documentation for texlive-tabulary"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-newpx:texlive-newpx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-newpx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabvar)
+msgid "Typesetting tables showing variations of functions"
+msgstr ""
-#. description(texlive-newsletr:texlive-newsletr-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-newsletr"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabvar)
+msgid ""
+"This LaTeX package is meant to ease the typesetting of tables showing variations of functions as they are used in France.\n"
+"\n"
+"date: 2013-01-22 16:38:01 +0000"
+msgstr ""
-#. description(texlive-newspaper:texlive-newspaper-doc)
+#. summary(texlive-specs-v:texlive-tabvar-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-newspaper"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tabvar"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-newtx:texlive-newtx-doc)
+#. description(texlive-specs-v:texlive-tabvar-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-newtx"
+msgid "This package includes the documentation for texlive-tabvar"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-newunicodechar:texlive-newunicodechar-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-newunicodechar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tabvar-fonts)
+msgid "Severed fonts for texlive-tabvar"
+msgstr ""
-#. description(texlive-newvbtm:texlive-newvbtm-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-newvbtm"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tabvar-fonts)
+msgid "The separated fonts package for texlive-tabvar"
+msgstr ""
-#. description(texlive-newverbs:texlive-newverbs-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-newverbs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tagging)
+msgid "Document configuration with tags"
+msgstr ""
-#. description(texlive-nfssext-cfr:texlive-nfssext-cfr-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nfssext-cfr"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tagging)
+msgid ""
+"The package allows the user to generate multiple documents from a single source, by marking pieces of the document with tags and specifying which marked pieces to include or exclude.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-nicefilelist:texlive-nicefilelist-doc)
+#. summary(texlive-specs-v:texlive-tagging-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nicefilelist"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tagging"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-niceframe:texlive-niceframe-doc)
+#. description(texlive-specs-v:texlive-tagging-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-niceframe"
+msgid "This package includes the documentation for texlive-tagging"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-nicetext:texlive-nicetext-doc)
+#. summary(texlive-specs-v:texlive-talk)
#, fuzzy
-msgid "This package includes the documentation for texlive-nicetext"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "A LaTeX class for presentations"
+msgstr "Třída LaTeXu používaná pro tvorbu dokumentace SuSE"
-#. description(texlive-nih:texlive-nih-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nih"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-talk)
+msgid ""
+"The talk document class allows you to create slides for screen presentations or printing on transparencies. It also allows you to print personal notes for your talk. You can create overlays and display structure information (current section / subsection, table of contents) on your slides. The main feature that distinguishes talk from other presentation classes like beamer or prosper is that it allows the user to define an arbitrary number of slide styles and switch between these styles from slide to slide. This way the slide layout can be adapted to the slide content. For example, the title or contents page of a talk can be given a slightly different layout than the other slides. The talk class makes no restrictions on the slide design whatsoever. The entire look and feel of the presentation can be defined by the user. The style definitions should be put in a separate sty file. Currently the package comes with only one set of pre-defined slide styles (greybars.sty). Contributions f
rom people who are artistically more gifted than the author are more than welcome!\n"
+"\n"
+"date: 2012-02-24 10:11:42 +0000"
+msgstr ""
-#. description(texlive-nkarta:texlive-nkarta-doc)
+#. summary(texlive-specs-v:texlive-talk-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nkarta"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-talk"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-nlctdoc:texlive-nlctdoc-doc)
+#. description(texlive-specs-v:texlive-talk-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nlctdoc"
+msgid "This package includes the documentation for texlive-talk"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-noconflict:texlive-noconflict-doc)
-msgid "This package includes the documentation for texlive-noconflict"
+#. summary(texlive-specs-v:texlive-tamefloats)
+msgid "Experimentally use \\holdinginserts with LaTeX floats"
msgstr ""
-#. description(texlive-noitcrul:texlive-noitcrul-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-noitcrul"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tamefloats)
+msgid ""
+"LaTeX's figures, tables, and \\marginpars are dangerous for footnotes (and probably also \\enlargethispage). Here is a proposal (a 'patch' package) to help, by using \\holdinginserts in a simple way. It replaces the original problem with a new one -- it is an experiment to find out whether the new problem is less bad (or it is just a contribution to the discussion, maybe just a summary of previous work). The files provide further information.\n"
+"\n"
+"date: 2012-08-13 10:34:19 +0000"
+msgstr ""
-#. description(texlive-nolbreaks:texlive-nolbreaks-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nolbreaks"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tamefloats-doc)
+msgid "Documentation for texlive-tamefloats"
+msgstr ""
-#. description(texlive-nomencl:texlive-nomencl-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nomencl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tamefloats-doc)
+msgid "This package includes the documentation for texlive-tamefloats"
+msgstr ""
-#. description(texlive-nomentbl:texlive-nomentbl-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nomentbl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tamethebeast)
+msgid "A manual about bibliographies and especially BibTeX"
+msgstr ""
-#. description(texlive-nonfloat:texlive-nonfloat-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nonfloat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tamethebeast)
+msgid ""
+"An (as-complete-as-possible) manual about bibliographies in LaTeX, and thus mainly about BibTeX.\n"
+"\n"
+"date: 2012-06-05 12:57:36 +0000"
+msgstr ""
-#. description(texlive-nonumonpart:texlive-nonumonpart-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nonumonpart"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tap)
+msgid "TeX macros for typesetting complex tables"
+msgstr ""
-#. description(texlive-nopageno:texlive-nopageno-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nopageno"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tap)
+msgid ""
+"The package offers a simple notation for pretty complex tables (to Michael J. Ferguson's credit). With PostScript, the package allows shaded/coloured tables, diagonal rules, etc. The package is supposed to work with both Plain and LaTeX. An AWK converter from ASCII semigraphic tables to TAP notation is included.\n"
+"\n"
+"date: 2012-06-22 11:21:57 +0000"
+msgstr ""
-#. description(texlive-nostarch:texlive-nostarch-doc)
+#. summary(texlive-specs-v:texlive-tap-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nostarch"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tap"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-notes:texlive-notes-doc)
+#. description(texlive-specs-v:texlive-tap-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-notes"
+msgid "This package includes the documentation for texlive-tap"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-notes2bib:texlive-notes2bib-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-notes2bib"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tapir)
+msgid "A simple geometrical font"
+msgstr ""
-#. description(texlive-notoccite:texlive-notoccite-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-notoccite"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tapir)
+msgid ""
+"Tapir is a simple geometrical font mostly created of line and circular segments with constant thickness. The font is available as Metafont source and in Adobe Type 1 format. The character set contains all characters in the range 0-127 (as in cmr10), accented characters used in the Czech, Slovak and Polish languages.\n"
+"\n"
+"date: 2012-06-22 11:21:57 +0000"
+msgstr ""
-#. description(texlive-nowidow:texlive-nowidow-doc)
+#. summary(texlive-specs-v:texlive-tapir-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nowidow"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tapir"
+msgstr "Dokumentace pro castor"
-#. description(texlive-nrc:texlive-nrc-doc)
+#. description(texlive-specs-v:texlive-tapir-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-nrc"
+msgid "This package includes the documentation for texlive-tapir"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ntgclass:texlive-ntgclass-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ntgclass"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tapir-fonts)
+msgid "Severed fonts for texlive-tapir"
+msgstr ""
-#. description(texlive-ntheorem:texlive-ntheorem-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ntheorem"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tapir-fonts)
+msgid "The separated fonts package for texlive-tapir"
+msgstr ""
-#. description(texlive-nuc:texlive-nuc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-nuc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tcldoc)
+msgid "Doc/docstrip for tcl"
+msgstr ""
-#. description(texlive-numberedblock:texlive-numberedblock-doc)
-msgid "This package includes the documentation for texlive-numberedblock"
+#. description(texlive-specs-v:texlive-tcldoc)
+msgid ""
+"The tclldoc package and class simplify the application of the doc/docstrip style of literate programming with Dr. John Ousterhout's Tool Command Language (Tcl, pronounced \"tickle\", a.k.a. The Cool Language). The tclldoc package is a bit like the doc package is for LaTeX, whereas the tclldoc class more parallels the ltxdoc class.\n"
+"\n"
+"date: 2012-06-22 11:21:57 +0000"
msgstr ""
-#. description(texlive-numericplots:texlive-numericplots-doc)
+#. summary(texlive-specs-v:texlive-tcldoc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-numericplots"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tcldoc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-numname:texlive-numname-doc)
+#. description(texlive-specs-v:texlive-tcldoc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-numname"
+msgid "This package includes the documentation for texlive-tcldoc"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-numprint:texlive-numprint-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-numprint"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tcolorbox)
+msgid "Coloured boxes, for LaTeX examples and theorems, etcetera"
+msgstr ""
-#. description(texlive-oberdiek:texlive-oberdiek-doc)
+#. description(texlive-specs-v:texlive-tcolorbox)
+msgid ""
+"The package provides an environment for coloured and framed text boxes with a heading line. Optionally, such a box can be split in an upper and a lower part; thus the package may be used for the setting of LaTeX examples where one part of the box displays the source code and the other part shows the output. Another common use case is the setting of theorems. The package supports saving and reuse of source code and text parts.\n"
+"\n"
+"date: 2014-05-18 13:54:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-v:texlive-tcolorbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-oberdiek"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tcolorbox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-objectz:texlive-objectz-doc)
+#. description(texlive-specs-v:texlive-tcolorbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-objectz"
+msgid "This package includes the documentation for texlive-tcolorbox"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ocg-p:texlive-ocg-p-doc)
-msgid "This package includes the documentation for texlive-ocg-p"
+#. summary(texlive-specs-v:texlive-tdclock)
+msgid "A ticking digital clock package for PDF output"
msgstr ""
-#. description(texlive-ocgx:texlive-ocgx-doc)
-msgid "This package includes the documentation for texlive-ocgx"
+#. description(texlive-specs-v:texlive-tdclock)
+msgid ""
+"A ticking digital clock package to be used in Pdf-LaTeX documents, for example in presentations.\n"
+"\n"
+"date: 2014-02-24 18:15:41 +0000"
msgstr ""
-#. description(texlive-ocherokee:texlive-ocherokee-doc)
+#. summary(texlive-specs-v:texlive-tdclock-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ocherokee"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tdclock"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ocr-b:texlive-ocr-b-doc)
+#. description(texlive-specs-v:texlive-tdclock-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ocr-b"
+msgid "This package includes the documentation for texlive-tdclock"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ocr-b-outline:texlive-ocr-b-outline-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ocr-b-outline"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tds)
+msgid "The TeX Directory Structure standard"
+msgstr ""
-#. description(texlive-ocr-latex:texlive-ocr-latex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ocr-latex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tds)
+msgid ""
+"Defines a structure for placement of TeX-related files on an hierarchical file system, in a way that is well-defined, and is readily implementable.\n"
+"\n"
+"date: 2012-06-23 12:35:06 +0000"
+msgstr ""
-#. description(texlive-octavo:texlive-octavo-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-octavo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tdsfrmath)
+msgid "Macros for French teachers of mathematics"
+msgstr ""
-#. description(texlive-odsfile:texlive-odsfile-doc)
-msgid "This package includes the documentation for texlive-odsfile"
+#. description(texlive-specs-v:texlive-tdsfrmath)
+msgid ""
+"A collection of macros for French maths teachers in colleges and lycees (and perhaps elsewhere). It is hoped that the package will facilitate the everyday use of LaTeX by mathematics teachers.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ofs:texlive-ofs-doc)
+#. summary(texlive-specs-v:texlive-tdsfrmath-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ofs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tdsfrmath"
+msgstr "Dokumentace pro castor"
-#. description(texlive-ogham:texlive-ogham-doc)
+#. description(texlive-specs-v:texlive-tdsfrmath-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ogham"
+msgid "This package includes the documentation for texlive-tdsfrmath"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-oinuit:texlive-oinuit-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-oinuit"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-technics)
+msgid "A package to format technical documents"
+msgstr ""
-#. description(texlive-oldlatin:texlive-oldlatin-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-oldlatin"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-technics)
+msgid ""
+"The package provides a very simple LaTeX document template, in the hope that this use of LaTeX will become attractive to typical word processor users. (Presentation is as if it were a class; users are expected to start from a template document.)\n"
+"\n"
+"date: 2012-08-30 23:04:09 +0000"
+msgstr ""
-#. description(texlive-oldstandard:texlive-oldstandard-doc)
+#. summary(texlive-specs-v:texlive-technics-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-oldstandard"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-technics"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-oldstyle:texlive-oldstyle-doc)
+#. description(texlive-specs-v:texlive-technics-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-oldstyle"
+msgid "This package includes the documentation for texlive-technics"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-omega:texlive-omega-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-omega"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-ted)
+msgid "A (primitive) token list editor"
+msgstr ""
-#. description(texlive-onlyamsmath:texlive-onlyamsmath-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-onlyamsmath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-ted)
+msgid ""
+"Just like sed is a stream editor, ted is a token list editor. Actually, it is not as powerful as sed, but its main feature is that it really works with tokens, not only characters. The ted package provides two user macros: \\Substitute and \\ShowTokens. The first is maybe the most useful: it performs substitutions in token lists (even inside braces). The second displays each token of the list (one per line) with its catcode (in the list, not just the current one), and can be useful for debugging or for TeX learners. Ted is designed to work well even if strange tokens (that is, unusual {charcode, catcode} pairs or tokens with a confusing meaning) occur in the list.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-onrannual:texlive-onrannual-doc)
+#. summary(texlive-specs-v:texlive-ted-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-onrannual"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ted"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-opcit:texlive-opcit-doc)
+#. description(texlive-specs-v:texlive-ted-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-opcit"
+msgid "This package includes the documentation for texlive-ted"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-opensans:texlive-opensans-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-opensans"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-templates-fenn)
+#. summary(texlive-specs-v:texlive-templates-sommer)
+msgid "Templates for TeX usage"
+msgstr ""
-#. description(texlive-opteng:texlive-opteng-doc)
-msgid "This package includes the documentation for texlive-opteng"
+#. description(texlive-specs-v:texlive-templates-fenn)
+msgid ""
+"A set of templates for using LaTeX packages that the author uses, comprising: - scrlttr2.tex: a letter, written with scrlttr2.cls from the KOMA-Script bundle; - dinbrief.tex: a letter according to the German (DIN) standards, written with dinbrief.cls; - kbrief.tex: a brief memo ('Kurzbrief') to accompany enclosures, as used in German offices, again based on dinbrief; - vermerk.tex: a general form for taking down notes on events in the office; and - diabetes.tex: a diary for the basis-bolus insulin therapy of diabetes mellitus, using scrartcl.cls from the KOMA-Script bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-optional:texlive-optional-doc)
+#. description(texlive-specs-v:texlive-templates-sommer)
+msgid ""
+"A set of templates for using LaTeX packages that the author uses, comprising: - Hausarbeit.tex: for students of the Lehrstuhl Volkskunde an der Friedrich-Schiller-Universitat Jena; - Psycho-Dipl.tex: for diploma theses in psychology.\n"
+"\n"
+"date: 2012-06-22 13:48:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-v:texlive-tengwarscript)
+msgid "LaTeX support for using Tengwar fonts"
+msgstr ""
+
+#. description(texlive-specs-v:texlive-tengwarscript)
+msgid ""
+"The package provides \"mid-level\" access to tengwar fonts, providing good quality output. Each tengwar sign is represented by a command, which will place the sign nicely in relation to previous signs. A transcription package is available from the package's home page: writing all those tengwar commands would quickly become untenable. The package supports the use of a wide variety of tengwar fonts that are available from the net; metric and map files are provided for all the supported fonts.\n"
+"\n"
+"date: 2012-06-22 13:48:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-v:texlive-tengwarscript-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-optional"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tengwarscript"
+msgstr "Dokumentace pro castor"
-#. description(texlive-ordinalpt:texlive-ordinalpt-doc)
+#. description(texlive-specs-v:texlive-tengwarscript-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ordinalpt"
+msgid "This package includes the documentation for texlive-tengwarscript"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-orkhun:texlive-orkhun-doc)
+#. summary(texlive-specs-v:texlive-tensor)
#, fuzzy
-msgid "This package includes the documentation for texlive-orkhun"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Typeset tensors"
+msgstr "Program pro sázení not"
-#. description(texlive-oscola:texlive-oscola-doc)
-msgid "This package includes the documentation for texlive-oscola"
+#. description(texlive-specs-v:texlive-tensor)
+msgid ""
+"A package which allows the user to set tensor-style super- and subscripts with offsets between successive indices. It supports the typesetting of tensors with mixed upper and lower indices with spacing, also typset preposed indices. This is a complete revision and extension of the original 'tensor' package by Mike Piff.\n"
+"\n"
+"date: 2012-06-01 19:24:39 +0000"
msgstr ""
-#. description(texlive-ot-tableau:texlive-ot-tableau-doc)
+#. summary(texlive-specs-v:texlive-tensor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ot-tableau"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tensor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-othello:texlive-othello-doc)
+#. description(texlive-specs-v:texlive-tensor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-othello"
+msgid "This package includes the documentation for texlive-tensor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-othelloboard:texlive-othelloboard-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-othelloboard"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-termcal)
+msgid "Print a class calendar"
+msgstr ""
-#. description(texlive-otibet:texlive-otibet-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-otibet"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-termcal)
+msgid ""
+"This package is intended to print a term calendar for use in planning a class. It has a flexible mechanism for specifying which days of the week are to be included and for inserting text either regularly on the same day each week, or on selected days, or for a series of consecutive days. It also has a flexible mechanism for specifing class and nonclass days. Text may be inserted into consecutive days so that it automatically flows around nonclass days.\n"
+"\n"
+"date: 2012-04-19 10:58:26 +0000"
+msgstr ""
-#. description(texlive-oubraces:texlive-oubraces-doc)
+#. summary(texlive-specs-v:texlive-termcal-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-oubraces"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-termcal"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-outline:texlive-outline-doc)
+#. description(texlive-specs-v:texlive-termcal-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-outline"
+msgid "This package includes the documentation for texlive-termcal"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-outliner:texlive-outliner-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-outliner"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-termlist)
+msgid "Label any kind of term with a continuous counter"
+msgstr ""
-#. description(texlive-outlines:texlive-outlines-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-outlines"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-termlist)
+msgid ""
+"The termlist package provides environments to indent and label any kind of terms with a continuous number. Candidate terms may appear inside an equation or eqnarray environment.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-overpic:texlive-overpic-doc)
+#. summary(texlive-specs-v:texlive-termlist-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-overpic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-termlist"
+msgstr "Dokumentace pro castor"
-#. description(texlive-pacioli:texlive-pacioli-doc)
+#. description(texlive-specs-v:texlive-termlist-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pacioli"
+msgid "This package includes the documentation for texlive-termlist"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pagecolor:texlive-pagecolor-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pagecolor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tetex)
+msgid "Scripts and files originally written for or included in teTeX"
+msgstr ""
-#. description(texlive-pagecont:texlive-pagecont-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pagecont"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tetex)
+msgid ""
+"teTeX was a comprehensive distribution of TeX, LaTeX and family, designed for ease of compilation, installation and customisation. In 2006, Thomas Esser announced he would no longer be able to support, or to produce new versions of, teTeX. With the appearance of TeX live 2007 (whose Unix-system TeX support originally derived from teTeX), no-one should be using teTeX at all, in new applications. One of the \"schemes\" available when installing TeX live provides a configuration very close to that of the old teTeX, but using modern versions of programs and packages.\n"
+"\n"
+"date: 2012-09-11 06:43:58 +0000"
+msgstr ""
-#. description(texlive-pagenote:texlive-pagenote-doc)
+#. summary(texlive-specs-v:texlive-tetex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pagenote"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tetex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pagerange:texlive-pagerange-doc)
+#. description(texlive-specs-v:texlive-tetex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pagerange"
+msgid "This package includes the documentation for texlive-tetex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pageslts:texlive-pageslts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pageslts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-teubner)
+msgid "Philological typesetting of classical Greek"
+msgstr ""
-#. description(texlive-paper:texlive-paper-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-paper"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-teubner)
+msgid ""
+"An extension to babel greek option for typesetting classical Greek with a philological approach. The package works with the author's greek fonts using the 'Lispiakos' font shape derived from that of the fonts used in printers' shops in Lispia. The package name honours the publisher B.G. Teubner Verlaggesellschaft whose Greek text publications are of high quality.\n"
+"\n"
+"date: 2013-12-31 14:44:59 +0000"
+msgstr ""
-#. description(texlive-papercdcase:texlive-papercdcase-doc)
+#. summary(texlive-specs-v:texlive-teubner-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-papercdcase"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-teubner"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-papermas:texlive-papermas-doc)
+#. description(texlive-specs-v:texlive-teubner-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-papermas"
+msgid "This package includes the documentation for texlive-teubner"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-papertex:texlive-papertex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-papertex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex)
+msgid "A sophisticated typesetting engine"
+msgstr ""
-#. description(texlive-paracol:texlive-paracol-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-paracol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex)
+msgid ""
+"TeX is a typesetting system that incorporates a macro processor. A TeX source document specifies or incorporates a number of macro definitions that instruct the TeX engine how to typeset the document. The TeX engine also uses font metrics generated by Metafont, or by any of several other mechanisms that incorporate fonts from other sources into an environment suitable for TeX. TeX has been, and continues, a basis and an inspiration for several other programs, including e-TeX and PDFTeX. The distribution includes the source of Knuth's TeX book; this source is there to read, as an example of writing TeX -- it should not be processed without Knuth's direct permission.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-paralist:texlive-paralist-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-paralist"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-ewd)
+msgid "Macros to typeset calculational proofs and programs in Dijkstra's style"
+msgstr ""
-#. description(texlive-parallel:texlive-parallel-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-parallel"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-ewd)
+msgid ""
+"Edsger W. Dijkstra and others suggest a unique style to present mathematical proofs and to construct programs. This package provides macros that support calculational proofs and Dijkstra's \"guarded command language\".\n"
+"\n"
+"date: 2012-06-27 14:40:35 +0000"
+msgstr ""
-#. description(texlive-paratype:texlive-paratype-doc)
+#. summary(texlive-specs-v:texlive-tex-ewd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-paratype"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tex-ewd"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-paresse:texlive-paresse-doc)
+#. description(texlive-specs-v:texlive-tex-ewd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-paresse"
+msgid "This package includes the documentation for texlive-tex-ewd"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-parnotes:texlive-parnotes-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-parnotes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-font-errors-cheatsheet)
+msgid "Cheat sheet outlining the most common TeX font errors"
+msgstr ""
-#. description(texlive-parrun:texlive-parrun-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-parrun"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-font-errors-cheatsheet)
+msgid ""
+"This is a compact three-pages document highlighting the TeX flow of integrating fonts, and explains how some of the most common font-related error messages occur. Also, hints are given on how to address those.\n"
+"\n"
+"date: 2012-06-27 14:40:35 +0000"
+msgstr ""
-#. description(texlive-parselines:texlive-parselines-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-parselines"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-gyre)
+msgid "TeX Fonts extending freely available URW fonts"
+msgstr ""
-#. description(texlive-parskip:texlive-parskip-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-parskip"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-gyre)
+msgid ""
+"The TeX-GYRE bundle consists of six font families: TeX Gyre Adventor is based on the URW Gothic L family of fonts (which is derived from ITC Avant Garde Gothic, designed by Herb Lubalin and Tom Carnase). TeX Gyre Bonum is based on the URW Bookman L family (from Bookman Old Style, designed by Alexander Phemister). TeX Gyre Chorus is based on URW Chancery L Medium Italic (from ITC Zapf Chancery, designed by Hermann Zapf in 1979). TeX-Gyre Cursor is based on URW Nimbus Mono L (based on Courier, designed by Howard G. Kettler in 1955, for IBM). TeX Gyre Heros is based on URW Nimbus Sans L (from Helvetica, prepared by Max Miedinger, with Eduard Hoffmann in 1957). TeX Gyre Pagella is based on URW Palladio L (from Palatino, designed by Hermann Zapf in the 1940s). TeX Gyre Schola is based on the URW Century Schoolbook L family (which was designed by Morris Fuller Benton for the American Type Founders). TeX Gyre Termes is based on the URW Nimbus Roman No9 L family of fonts (whose original, T
imes, was designed by Stanley Morison together with Starling Burgess and Victor Lardent and first offered by Monotype). The constituent standard faces of each family have been greatly extended, and contain nearly 1100 glyphs each (though Chorus omits Greek support, has no small-caps family and has approximately 800 glyphs). Each family is available in Adobe Type 1 and Open Type formats, and LaTeX support (for use with a variety of encodings) is provided. Vietnamese characters were added by Han The Thanh.\n"
+"\n"
+"date: 2014-05-22 14:13:18 +0000"
+msgstr ""
-#. description(texlive-patchcmd:texlive-patchcmd-doc)
+#. summary(texlive-specs-v:texlive-tex-gyre-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-patchcmd"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tex-gyre"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-path:texlive-path-doc)
+#. description(texlive-specs-v:texlive-tex-gyre-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-path"
+msgid "This package includes the documentation for texlive-tex-gyre"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pauldoc:texlive-pauldoc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pauldoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-gyre-fonts)
+msgid "Severed fonts for texlive-tex-gyre"
+msgstr ""
-#. description(texlive-pawpict:texlive-pawpict-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pawpict"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-gyre-fonts)
+msgid "The separated fonts package for texlive-tex-gyre"
+msgstr ""
-#. description(texlive-pax:texlive-pax-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pax"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-gyre-math)
+msgid "Maths fonts to match tex-gyre text fonts"
+msgstr ""
-#. description(texlive-pb-diagram:texlive-pb-diagram-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pb-diagram"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-gyre-math)
+msgid ""
+"TeX-Gyre-Math is to be a collection of maths fonts to match the text fonts of the TeX-Gyre collection. The collection will be made available in OpenType format, only; fonts will conform to the developing standards for OpenType maths fonts. TeX-Gyre- Math-Pagella (to match Tex-Gyre-Pagella), TeX-Gyre-Math-Pagella (to match Tex-Gyre-Pagella) and TeX-Gyre-Math-Termes (to match Tex-Gyre-Termes) fonts are provided.\n"
+"\n"
+"date: 2014-05-22 13:22:51 +0000"
+msgstr ""
-#. description(texlive-pbox:texlive-pbox-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pbox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-gyre-math-doc)
+msgid "Documentation for texlive-tex-gyre-math"
+msgstr ""
-#. description(texlive-pbsheet:texlive-pbsheet-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pbsheet"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-gyre-math-doc)
+msgid "This package includes the documentation for texlive-tex-gyre-math"
+msgstr ""
-#. description(texlive-pdf-trans:texlive-pdf-trans-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdf-trans"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-gyre-math-fonts)
+msgid "Severed fonts for texlive-tex-gyre-math"
+msgstr ""
-#. description(texlive-pdf14:texlive-pdf14-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdf14"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-gyre-math-fonts)
+msgid "The separated fonts package for texlive-tex-gyre-math"
+msgstr ""
-#. description(texlive-pdfcomment:texlive-pdfcomment-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfcomment"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-label)
+msgid "Place a classification on each page of a document"
+msgstr ""
-#. description(texlive-pdfcprot:texlive-pdfcprot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfcprot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-label)
+msgid ""
+"Enables the user to place a 'classification' label on each page, at the bottom to the right of the page number\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-pdfcrop:texlive-pdfcrop-doc)
+#. summary(texlive-specs-v:texlive-tex-label-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pdfcrop"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tex-label"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pdfjam:texlive-pdfjam-doc)
+#. description(texlive-specs-v:texlive-tex-label-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pdfjam"
+msgid "This package includes the documentation for texlive-tex-label"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pdfmarginpar:texlive-pdfmarginpar-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfmarginpar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-overview)
+msgid "An overview of the development of TeX"
+msgstr ""
-#. description(texlive-pdfpages:texlive-pdfpages-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfpages"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-overview)
+msgid ""
+"The document gives a short overview of TeX and its children, as well as the macro packages LaTeX and ConTeXt.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-pdfscreen:texlive-pdfscreen-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfscreen"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-ps)
+msgid "TeX to PostScript generic macros and add-ons"
+msgstr ""
-#. description(texlive-pdfslide:texlive-pdfslide-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfslide"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-ps)
+msgid ""
+"TeX to PostScript generic macros and add-ons: transformations of EPS files, prepress preparation, color separation, mirror, etc.\n"
+"\n"
+"date: 2012-06-26 11:14:08 +0000"
+msgstr ""
-#. description(texlive-pdfsync:texlive-pdfsync-doc)
+#. summary(texlive-specs-v:texlive-tex-ps-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pdfsync"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tex-ps"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pdftex:texlive-pdftex-doc)
+#. description(texlive-specs-v:texlive-tex-ps-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pdftex"
+msgid "This package includes the documentation for texlive-tex-ps"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pdftools:texlive-pdftools-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdftools"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-refs)
+msgid "References for TeX and Friends"
+msgstr ""
-#. description(texlive-pdftricks:texlive-pdftricks-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdftricks"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-refs)
+msgid ""
+"This is an ongoing project with the aim of providing a help file for LaTeX (and its friends like ConTeXt, Metapost, Metafont, etc.) using a state-of-the-art source format, aka DocBook/XML.\n"
+"\n"
+"date: 2013-10-24 14:44:11 +0000"
+msgstr ""
-#. description(texlive-pdfwin:texlive-pdfwin-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfwin"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex-virtual-academy-pl)
+msgid "Package tex-virtual-academy-pl"
+msgstr "Balíček tex-virtual-academy-pl"
-#. description(texlive-pdfx:texlive-pdfx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pdfx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex-virtual-academy-pl)
+msgid "The tex-virtual-academy-pl package"
+msgstr ""
-#. description(texlive-pecha:texlive-pecha-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pecha"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-tex4ht)
+msgid "Convert (La)TeX to HTML/XML"
+msgstr ""
-#. description(texlive-pedigree-perl:texlive-pedigree-perl-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pedigree-perl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-tex4ht)
+msgid ""
+"A converter from TeX and LaTeX to SGML-based formats such as (X)HTML, MathML, OpenDocument, and DocBook, providing a configurable (La)TeX-based authoring system for hypertext. Tex4ht does not parse (La)TeX source (so that it avoids the difficulties encountered by many other converters, arising from the irregularity of (La)TeX syntax). Instead, Tex4ht uses (La)TeX itself (with an extra macro package) to produce a non- standard DVI file that it can then process. This technique allows TeX4ht to approach the robustness characteristic of restricted-syntax systems such as hyperlatex and gellmu. Note that CTAN no longer holds the definitive sources of the package: see the 'Readme' file.\n"
+"\n"
+"date: 2014-01-03 11:07:14 +0000"
+msgstr ""
-#. description(texlive-perception:texlive-perception-doc)
+#. summary(texlive-specs-v:texlive-tex4ht-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-perception"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tex4ht"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-perltex:texlive-perltex-doc)
+#. description(texlive-specs-v:texlive-tex4ht-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-perltex"
+msgid "This package includes the documentation for texlive-tex4ht"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-permute:texlive-permute-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-permute"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texapi)
+msgid "Macros to write format-independent packages"
+msgstr ""
-#. description(texlive-persian-bib:texlive-persian-bib-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-persian-bib"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texapi)
+msgid ""
+"Texapi provides utility macros to write format-independent (and\n"
+"-aware) packages. It is similar in spirit to the etoolbox, except that it isn't tied to LaTeX. Tools include: engine and format detection, expansion control, command definition and manipulation, various testing macros, string operations, and highly customizable while and for loops. The package requires e-TeX (and, should you want to compile its documentation, the pitex package is also needed).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-persian-modern:texlive-persian-modern-doc)
+#. summary(texlive-specs-v:texlive-texapi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-persian-modern"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texapi"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-petiteannonce:texlive-petiteannonce-doc)
+#. description(texlive-specs-v:texlive-texapi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-petiteannonce"
+msgid "This package includes the documentation for texlive-texapi"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-petri-nets:texlive-petri-nets-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-petri-nets"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texbytopic)
+msgid "Freed version of the book TeX by Topic"
+msgstr ""
-#. description(texlive-pfarrei:texlive-pfarrei-doc)
-msgid "This package includes the documentation for texlive-pfarrei"
+#. description(texlive-specs-v:texlive-texbytopic)
+msgid ""
+"An invaluable book, originally published by Addison-Wesley (who have released their copyright -- their version of the book went out of print in the 1990s). The book describes itself as \"a TeXnician's reference\", and covers the way TeX (the engine) works in as much detail as most ordinary TeX programmers will ever need to know. A printed copy of the book may be had (for a modest price) via lulu.com (see the package home page for details).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pgf:texlive-pgf-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pgf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texconfig)
+msgid "Package texconfig"
+msgstr "Balíček texconfig"
-#. description(texlive-pgf-blur:texlive-pgf-blur-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pgf-blur"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texconfig)
+msgid "The texconfig package"
+msgstr ""
-#. description(texlive-pgf-soroban:texlive-pgf-soroban-doc)
+#. summary(texlive-specs-v:texlive-texconfig-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pgf-soroban"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texconfig"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pgf-umlsd:texlive-pgf-umlsd-doc)
+#. description(texlive-specs-v:texlive-texconfig-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pgf-umlsd"
+msgid "This package includes the documentation for texlive-texconfig"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pgfgantt:texlive-pgfgantt-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pgfgantt"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texcount)
+msgid "Count words in a LaTeX document"
+msgstr ""
-#. description(texlive-pgfkeyx:texlive-pgfkeyx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pgfkeyx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texcount)
+msgid ""
+"TeXcount is a Perl script that counts words in the text of LaTeX files. It has rules for handling most of the common macros, and can provide colour-coded output showing which parts of the text have been counted. The package script is available as a Web service via its home page.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-pgfmolbio:texlive-pgfmolbio-doc)
+#. summary(texlive-specs-v:texlive-texcount-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pgfmolbio"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texcount"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pgfopts:texlive-pgfopts-doc)
+#. description(texlive-specs-v:texlive-texcount-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pgfopts"
+msgid "This package includes the documentation for texlive-texcount"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pgfplots:texlive-pgfplots-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pgfplots"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texdef)
+msgid "Display the definitions of TeX commands"
+msgstr ""
-#. description(texlive-phaistos:texlive-phaistos-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-phaistos"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texdef)
+msgid ""
+"The (Perl) script displays the definition of (La)TeX command sequences/macros. Various options allow the selection of the used class and package files and other things which can have influence on the definition (before/after the preamble, inside an environment, ...). The script creates a temporary TeX file which is then compiled using (La)TeX to find the '\\meaning' of the command sequence. The result is formatted and presented to the user. Length or number command sequences (dimensions, \\char..., count registers, ...) are recognized and the contained value is also shown (using \\the). Special definitions like protected macros are also recognized and the underlying macros are shown as well. The script will show plain TeX definitions by default. LaTeX and ConTeXt are supported, including flavours (pdf(la)tex, lua(la)tex, xe(la)tex, ...). The flavour can be selected using an command line option or over the script name: latexdef will use LaTeX as default, etc.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-philex:texlive-philex-doc)
+#. summary(texlive-specs-v:texlive-texdef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-philex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texdef"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-philokalia:texlive-philokalia-doc)
+#. description(texlive-specs-v:texlive-texdef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-philokalia"
+msgid "This package includes the documentation for texlive-texdef"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-philosophersimprint:texlive-philosophersimprint-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-philosophersimprint"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texdiff)
+msgid "Compare documents and produce tagged merge"
+msgstr ""
-#. description(texlive-phonetic:texlive-phonetic-doc)
+#. description(texlive-specs-v:texlive-texdiff)
+msgid ""
+"Two files are compared and a new TeX file is output. When the output file is processed with (La)TeX it marks new changes with blue and old text with red with a strike-through line. Furthermore, passages with changes are marked at the margin with grey bars by the LaTeX changebar package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-v:texlive-texdiff-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-phonetic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texdiff"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-photo:texlive-photo-doc)
+#. description(texlive-specs-v:texlive-texdiff-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-photo"
+msgid "This package includes the documentation for texlive-texdiff"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-physics:texlive-physics-doc)
-msgid "This package includes the documentation for texlive-physics"
+#. summary(texlive-specs-v:texlive-texdirflatten)
+msgid "Collect files related to a LaTeX job in a single directory"
msgstr ""
-#. description(texlive-physymb:texlive-physymb-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-physymb"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texdirflatten)
+msgid ""
+"The Perl script parses a LaTeX file recursively, scanning all child files, and collects details of any included and other data files. These component files, are then all put into a single directory (thus \"flattening\" the document's directory tree).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-piano:texlive-piano-doc)
+#. summary(texlive-specs-v:texlive-texdirflatten-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-piano"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texdirflatten"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-picinpar:texlive-picinpar-doc)
+#. description(texlive-specs-v:texlive-texdirflatten-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-picinpar"
+msgid "This package includes the documentation for texlive-texdirflatten"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pict2e:texlive-pict2e-doc)
+#. summary(texlive-specs-v:texlive-texdoc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pict2e"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation access for TeX distributions"
+msgstr "Příklady pro puretls"
-#. description(texlive-pictex:texlive-pictex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pictex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texdoc)
+msgid ""
+"TeXdoc is an application for easy access to the package documentation of a TeX distributions (i.e., .dvi, .pdf or .ps files on the $TEXDOCS tree). It is distributed with TeX-Live and a derivative is distributed with miktex.\n"
+"\n"
+"date: 2014-01-03 11:07:14 +0000"
+msgstr ""
-#. description(texlive-piechartmp:texlive-piechartmp-doc)
+#. summary(texlive-specs-v:texlive-texdoc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-piechartmp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texdoc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-piff:texlive-piff-doc)
+#. description(texlive-specs-v:texlive-texdoc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-piff"
+msgid "This package includes the documentation for texlive-texdoc"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pigpen:texlive-pigpen-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pigpen"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texdraw)
+msgid "Graphical macros, using embedded PostScript"
+msgstr ""
-#. description(texlive-pinlabel:texlive-pinlabel-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pinlabel"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texdraw)
+msgid ""
+"TeXdraw is a set of macro definitions for TeX, which allow the user to produce PostScript drawings from within TeX and LaTeX. TeXdraw has been designed to be extensible. Drawing 'segments' are relocatable, self-contained units. Using a combination of the TeX's grouping mechanism and the gsave/grestore mechanism in PostScript, drawing segments allow for local changes to the scaling and line parameters. Using TeX's macro definition capability, new drawing commands can be constructed from drawing segments.\n"
+"\n"
+"date: 2012-06-05 19:37:17 +0000"
+msgstr ""
-#. description(texlive-pitex:texlive-pitex-doc)
+#. summary(texlive-specs-v:texlive-texdraw-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pitex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texdraw"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pittetd:texlive-pittetd-doc)
+#. description(texlive-specs-v:texlive-texdraw-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pittetd"
+msgid "This package includes the documentation for texlive-texdraw"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pkfix:texlive-pkfix-doc)
+#. summary(texlive-specs-v:texlive-texfot)
+msgid "Filter clutter from the output of a TeX run"
+msgstr ""
+
+#. description(texlive-specs-v:texlive-texfot)
+msgid ""
+"The package provides a small Perl script to filter the online output from a TeX run, attempting to show only those messages which probably deserve some change in the source. The TeX invocation itself need not change.\n"
+"\n"
+"date: 2014-03-17 10:47:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-v:texlive-texfot-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pkfix"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texfot"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pkfix-helper:texlive-pkfix-helper-doc)
+#. description(texlive-specs-v:texlive-texfot-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pkfix-helper"
+msgid "This package includes the documentation for texlive-texfot"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pkuthss:texlive-pkuthss-doc)
-msgid "This package includes the documentation for texlive-pkuthss"
+#. summary(texlive-specs-v:texlive-texilikechaps)
+msgid "Format chapters with a texi-like format"
msgstr ""
-#. description(texlive-pl:texlive-pl-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-v:texlive-texilikechaps)
+msgid ""
+"The package enables the user to reduce the size of the rather large chapter headings in standard classes into a texi-like smaller format. Details of the format may be controlled with internal commands.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-placeins:texlive-placeins-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-placeins"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-v:texlive-texilikecover)
+msgid "A cover-page package, like TeXinfo"
+msgstr ""
-#. description(texlive-plainpkg:texlive-plainpkg-doc)
-msgid "This package includes the documentation for texlive-plainpkg"
+#. description(texlive-specs-v:texlive-texilikecover)
+msgid ""
+"The package creates document cover pages, like those that TeXinfo produces.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-plantslabels:texlive-plantslabels-doc)
+#. summary(texlive-specs-w:texlive-texinfo)
#, fuzzy
-msgid "This package includes the documentation for texlive-plantslabels"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Texinfo documentation system"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-plari:texlive-plari-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-plari"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texinfo)
+msgid ""
+"Texinfo is the preferred format for documentation in the GNU project; the format may be used to produce online or printed output from a single source. The Texinfo macros may be used to produce printable output using TeX; other programs in the distribution offer online interactive use (with hypertext linkages in some cases). Note that a developers' snapshot of the latest release of the Texinfo macros may be found in the Texinfo 'latest' package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-plates:texlive-plates-doc)
+#. summary(texlive-specs-w:texlive-texlive-common)
+msgid "TeX Live documentation (common elements)"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-texlive-common)
#, fuzzy
-msgid "This package includes the documentation for texlive-plates"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "The texlive-common package"
+msgstr "Balíčky pro vývoj KDE"
-#. description(texlive-play:texlive-play-doc)
+#. summary(texlive-specs-w:texlive-texlive-cz)
#, fuzzy
-msgid "This package includes the documentation for texlive-play"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "SUSE Linux Manual (Czech)"
+msgid "TeX Live manual (Czech/Slovak)"
+msgstr "Manuál SUSE Linuxu (anglicky)"
-#. description(texlive-plipsum:texlive-plipsum-doc)
-msgid "This package includes the documentation for texlive-plipsum"
+#. description(texlive-specs-w:texlive-texlive-cz)
+msgid "The texlive-cz package"
msgstr ""
-#. description(texlive-plnfss:texlive-plnfss-doc)
+#. summary(texlive-specs-w:texlive-texlive-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-plnfss"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "TeX Live manual (German)"
+msgstr "SUSE Linux manuál (německy)."
-#. description(texlive-plstmary:texlive-plstmary-doc)
-msgid "This package includes the documentation for texlive-plstmary"
+#. description(texlive-specs-w:texlive-texlive-de)
+msgid "The texlive-de package"
msgstr ""
-#. description(texlive-plweb:texlive-plweb-doc)
+#. summary(texlive-specs-w:texlive-texlive-en)
#, fuzzy
-msgid "This package includes the documentation for texlive-plweb"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "TeX Live manual (English)"
+msgstr "SUSE Linux manuál (anglicky)."
-#. description(texlive-pmgraph:texlive-pmgraph-doc)
+#. description(texlive-specs-w:texlive-texlive-en)
+msgid "The texlive-en package"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-texlive-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-pmgraph"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "TeX Live manual (French)"
+msgstr "Manuálové stránky z projektu LDP ve francouzštině"
-#. description(texlive-pmx:texlive-pmx-doc)
-msgid "This package includes the documentation for texlive-pmx"
+#. description(texlive-specs-w:texlive-texlive-fr)
+msgid "The texlive-fr package"
msgstr ""
-#. description(texlive-poemscol:texlive-poemscol-doc)
+#. summary(texlive-specs-w:texlive-texlive-it)
#, fuzzy
-msgid "This package includes the documentation for texlive-poemscol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "TeX Live manual (Italian)"
+msgstr "SUSE Linux manuál (italsky)."
-#. description(texlive-poetrytex:texlive-poetrytex-doc)
-msgid "This package includes the documentation for texlive-poetrytex"
+#. description(texlive-specs-w:texlive-texlive-it)
+msgid "The texlive-it package"
msgstr ""
-#. description(texlive-polski:texlive-polski-doc)
+#. summary(texlive-specs-w:texlive-texlive-pl)
#, fuzzy
-msgid "This package includes the documentation for texlive-polski"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "TeX Live manual (Polish)"
+msgstr "Manuálové stránky z projektu LDP v italštině"
-#. description(texlive-poltawski:texlive-poltawski-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-poltawski"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texlive-pl)
+msgid "The texlive-pl package"
+msgstr ""
-#. description(texlive-polyglossia:texlive-polyglossia-doc)
+#. summary(texlive-specs-w:texlive-texlive-ru)
#, fuzzy
-msgid "This package includes the documentation for texlive-polyglossia"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "TeX Live manual (Russian)"
+msgstr "SUSE Linux manuál (německy)."
-#. description(texlive-polynom:texlive-polynom-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-polynom"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texlive-ru)
+msgid "The texlive-ru package"
+msgstr ""
-#. description(texlive-polynomial:texlive-polynomial-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-polynomial"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texlive-sr)
+msgid "TeX Live manual (Serbian)"
+msgstr ""
-#. description(texlive-polytable:texlive-polytable-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-polytable"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texlive-sr)
+msgid "The texlive-sr package"
+msgstr ""
-#. description(texlive-postcards:texlive-postcards-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-postcards"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texlive-zh-cn)
+msgid "TeX Live manual (Chinese)"
+msgstr ""
-#. description(texlive-poster-mac:texlive-poster-mac-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-poster-mac"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texlive-zh-cn)
+msgid "The texlive-zh-cn package"
+msgstr ""
-#. description(texlive-powerdot:texlive-powerdot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-powerdot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texliveonfly)
+msgid "On-the-fly download of missing TeX live packages"
+msgstr ""
-#. description(texlive-powerdot-FUBerlin:texlive-powerdot-FUBerlin-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-powerdot-FUBerlin"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texliveonfly)
+msgid ""
+"The package provides a script that performs 'on the fly' downloads of missing packages, while a document is being compiled. (This feature is already available in the MikTeX distribution for Windows machines.) To use the script, replace your (LaTeX) compilation command with texliveonfly.py file.tex (default options are --engine=lualatex and --arguments=\"- synctex=1 -interaction=nonstopmode\", which may all be changed). The script is designed to work on Linux distributions.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-ppr-prv:texlive-ppr-prv-doc)
+#. summary(texlive-specs-w:texlive-texliveonfly-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ppr-prv"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texliveonfly"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pracjourn:texlive-pracjourn-doc)
+#. description(texlive-specs-w:texlive-texliveonfly-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pracjourn"
+msgid "This package includes the documentation for texlive-texliveonfly"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-preprint:texlive-preprint-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-preprint"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texloganalyser)
+msgid "Analyse TeX logs"
+msgstr ""
-#. description(texlive-prerex:texlive-prerex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-prerex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texloganalyser)
+msgid ""
+"The perl script allows the user to extract (and display) elements of the log file\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-present:texlive-present-doc)
+#. summary(texlive-specs-w:texlive-texloganalyser-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-present"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texloganalyser"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-prettyref:texlive-prettyref-doc)
+#. description(texlive-specs-w:texlive-texloganalyser-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-prettyref"
+msgid "This package includes the documentation for texlive-texloganalyser"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-preview:texlive-preview-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-preview"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texlogos)
+msgid "Ready-to-use LaTeX logos"
+msgstr ""
-#. description(texlive-printlen:texlive-printlen-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-printlen"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texlogos)
+msgid ""
+"TeXlogos defines an assortment of frequently used logos not contained in base LaTeX itself. The Metafont, MetapostAMS, BibTeX and SliTeX logos are defined, as long as you have the appropriate CM/Logo/AMS fonts. Currency symbols Euro, Cent, Yen, Won and Naira are defined so as not to need TS1-encoded fonts. Also defined are the C++ logo, with the '+' signs properly positioned, and the logo of the Vienna University Business Administration Center (BWZ).\n"
+"\n"
+"date: 2012-06-27 20:19:02 +0000"
+msgstr ""
-#. description(texlive-proba:texlive-proba-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-proba"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texmate)
+msgid "Comprehensive chess annotation in LaTeX"
+msgstr ""
-#. description(texlive-probsoln:texlive-probsoln-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-probsoln"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texmate)
+msgid ""
+"TeXmate formats chess games from very simple ascii input. The clean \"1. e4 e5; 2. Nf3 Nc6; 3. Bb5 a6\" will produce the same results as the sloppier \"1 e4 e5; Nf3 Nc6 3.. Bb5 a6\". The resulting format is fully customizable. There are 4 levels of commentary: 1 is the main game, 2-3 are commentaries. Each has its fonts, punctuation marks, etc., and these are also customizable. The package includes a tool for the creation of diagrams. The package works in conjunction with skak to produce diagrams of the current position automatically. For chess fonts, the package uses the chessfss system.\n"
+"\n"
+"date: 2012-06-05 19:37:17 +0000"
+msgstr ""
-#. description(texlive-procIAGssymp:texlive-procIAGssymp-doc)
+#. summary(texlive-specs-w:texlive-texmate-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-procIAGssymp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texmate"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-prodint:texlive-prodint-doc)
+#. description(texlive-specs-w:texlive-texmate-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-prodint"
+msgid "This package includes the documentation for texlive-texmate"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-productbox:texlive-productbox-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-productbox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texments)
+msgid "Using the Pygments highlighter in LaTeX"
+msgstr ""
-#. description(texlive-program:texlive-program-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-program"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texments)
+msgid ""
+"A package which allows to use the Pygments highlighter inside LaTeX documents. Pygments supports syntax colouring of over 50 types of files, and ships with multiple colour schemes.\n"
+"\n"
+"date: 2012-06-26 11:14:08 +0000"
+msgstr ""
-#. description(texlive-progress:texlive-progress-doc)
+#. summary(texlive-specs-w:texlive-texments-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-progress"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texments"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-progressbar:texlive-progressbar-doc)
+#. description(texlive-specs-w:texlive-texments-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-progressbar"
+msgid "This package includes the documentation for texlive-texments"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-properties:texlive-properties-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-properties"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-texpower)
+msgid "Create dynamic online presentations with LaTeX"
+msgstr ""
-#. description(texlive-proposal:texlive-proposal-doc)
-msgid "This package includes the documentation for texlive-proposal"
+#. description(texlive-specs-w:texlive-texpower)
+msgid ""
+"TeXPower is a bundle of packages intended to provide an all- inclusive environment for designing pdf screen presentations to be viewed in full-screen mode, especially for projecting `online' with a video beamer. For some of its core functions, it uses code derived from ppower4 packages. It is, however, not a complete environment in itself: it relies on an existing class for preparing slides (such as foiltex or seminar) or another package such as pdfslide.\n"
+"\n"
+"date: 2012-02-24 10:11:42 +0000"
msgstr ""
-#. description(texlive-prosper:texlive-prosper-doc)
+#. summary(texlive-specs-w:texlive-texpower-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-prosper"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texpower"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-protex:texlive-protex-doc)
+#. description(texlive-specs-w:texlive-texpower-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-protex"
+msgid "This package includes the documentation for texlive-texpower"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-protocol:texlive-protocol-doc)
+#. summary(texlive-specs-w:texlive-texshade)
#, fuzzy
-msgid "This package includes the documentation for texlive-protocol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Package for setting nucleotide and peptide alignments"
+msgstr "Perlový modul pro vytváření a zpracování tar souborů"
-#. description(texlive-przechlewski-book:texlive-przechlewski-book-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-przechlewski-book"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texshade)
+msgid ""
+"TeXshade is alignment shading software completely written in TeX/LaTeX; it can process multiple sequence alignments in the .MSF and the .ALN file formats. In addition to common shading algorithms, it provides special shading modes showing functional aspects, e.g. charge or hydropathy, and a wide range of commands for handling shading colours, text styles, labels, legends; it even allows the user to define completely new shading modes. TeXshade combines highest flexibility with TeX output quality -- all in a bundle that does not demand excessive development time of the user.\n"
+"\n"
+"date: 2011-12-01 12:24:33 +0000"
+msgstr ""
-#. description(texlive-psbao:texlive-psbao-doc)
+#. summary(texlive-specs-w:texlive-texshade-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-psbao"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texshade"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pseudocode:texlive-pseudocode-doc)
+#. description(texlive-specs-w:texlive-texshade-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pseudocode"
+msgid "This package includes the documentation for texlive-texshade"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-psfrag:texlive-psfrag-doc)
+#. summary(texlive-specs-w:texlive-texsis)
#, fuzzy
-msgid "This package includes the documentation for texlive-psfrag"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Plain TeX macros for Physicists"
+msgstr "TeXová makra pro šachové diagramy"
-#. description(texlive-psfragx:texlive-psfragx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-psfragx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-texsis)
+msgid ""
+"TeXsis is a TeX macro package which provides useful features for typesetting research papers and related documents. For example, it includes support specifically for: Automatic numbering of equations, figures, tables and references; Simplified control of type sizes, line spacing, footnotes, running headlines and footlines, and tables of contents, figures and tables; Specialized document formats for research papers, preprints and ``e-prints,'' conference proceedings, theses, books, referee reports, letters, and memoranda; Simplified means of constructing an index for a book or thesis; Easy to use double column formatting; Specialized environments for lists, theorems and proofs, centered or non-justified text, and listing computer code; Specialized macros for easily constructing ruled tables. TeXsis was originally developed for physicists, but others may also find it useful. It is completely compatible with Plain TeX.\n"
+"\n"
+"date: 2012-06-05 20:22:59 +0000"
+msgstr ""
-#. description(texlive-psgo:texlive-psgo-doc)
+#. summary(texlive-specs-w:texlive-texsis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-psgo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-texsis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-psizzl:texlive-psizzl-doc)
+#. description(texlive-specs-w:texlive-texsis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-psizzl"
+msgid "This package includes the documentation for texlive-texsis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-psnfss:texlive-psnfss-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-psnfss"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-textcase)
+msgid "Case conversion ignoring mathematics, etcetera"
+msgstr ""
-#. description(texlive-pspicture:texlive-pspicture-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pspicture"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-textcase)
+msgid ""
+"The textcase package offers commands \\MakeTextUppercase and \\MakeTextLowercase are similar to the standard \\MakeUppercase and \\MakeLowercase, but they do not change the case of any sections of mathematics, or the arguments of \\cite, \\label and \\ref commands within the argument. A further command \\NoCaseChange does nothing but suppress case change within its argument, so to force uppercase of a section including an environment, one might say: \\MakeTextUppercase{...\\NoCaseChange{\\begin{foo}} ...\\NoCaseChange{\\end{foo}}...}\n"
+"\n"
+"date: 2012-06-26 12:36:07 +0000"
+msgstr ""
-#. description(texlive-pst-2dplot:texlive-pst-2dplot-doc)
+#. summary(texlive-specs-w:texlive-textcase-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-2dplot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textcase"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-3d:texlive-pst-3d-doc)
+#. description(texlive-specs-w:texlive-textcase-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-3d"
+msgid "This package includes the documentation for texlive-textcase"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-3dplot:texlive-pst-3dplot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-3dplot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-textfit)
+msgid "Fit text to a desired size"
+msgstr ""
-#. description(texlive-pst-abspos:texlive-pst-abspos-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-abspos"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-textfit)
+msgid ""
+"Package to fit text to a given width or height by scaling the font. For example: \\scaletowidth{3in}{This}. (The job is done by calculating a magstep and applying it to the current font; thus \"This\" will be very tall, as well as very wide; to scale in just one dimension, use the facilities of the graphicx package.)\n"
+"\n"
+"date: 2012-06-26 12:36:07 +0000"
+msgstr ""
-#. description(texlive-pst-am:texlive-pst-am-doc)
+#. summary(texlive-specs-w:texlive-textfit-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-am"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textfit"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-asr:texlive-pst-asr-doc)
+#. description(texlive-specs-w:texlive-textfit-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-asr"
+msgid "This package includes the documentation for texlive-textfit"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-bar:texlive-pst-bar-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-bar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-textglos)
+msgid ""
+"The package provides a set of macros for in-line linguistic examples (as opposed to interlinear glossing, set apart from the main text). It prevents hyphenated examples from breaking across lines and consistently formats phonemic examples, orthographic examples, and more.\n"
+"\n"
+"date: 2013-06-18 22:57:02 +0000"
+msgstr ""
-#. description(texlive-pst-barcode:texlive-pst-barcode-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-barcode"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-textglos-doc)
+msgid "Documentation for texlive-textglos"
+msgstr ""
-#. description(texlive-pst-bezier:texlive-pst-bezier-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-bezier"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-textglos-doc)
+msgid "This package includes the documentation for texlive-textglos"
+msgstr ""
-#. description(texlive-pst-blur:texlive-pst-blur-doc)
+#. summary(texlive-specs-w:texlive-textgreek)
+msgid "Upright greek letters in text"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-textgreek)
+msgid ""
+"Use upright greek letters as text symbols, e.g. \\textbeta.\n"
+"\n"
+"date: 2012-06-26 12:36:07 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-textgreek-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-blur"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textgreek"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-bspline:texlive-pst-bspline-doc)
+#. description(texlive-specs-w:texlive-textgreek-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-bspline"
+msgid "This package includes the documentation for texlive-textgreek"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-calendar:texlive-pst-calendar-doc)
+#. summary(texlive-specs-w:texlive-textmerg)
+msgid "Merge text in TeX and LaTeX"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-textmerg)
+msgid ""
+"Repetetively produce documents from a fixed part and a variable part. Such an operation is commonly used as \"mail merge\" to produce mail shots.\n"
+"\n"
+"date: 2012-06-27 20:19:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-textmerg-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-calendar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textmerg"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-circ:texlive-pst-circ-doc)
+#. description(texlive-specs-w:texlive-textmerg-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-circ"
+msgid "This package includes the documentation for texlive-textmerg"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-coil:texlive-pst-coil-doc)
+#. summary(texlive-specs-w:texlive-textopo)
+msgid "Annotated membrane protein topology plots"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-textopo)
+msgid ""
+"A LaTeX package for setting shaded and annotated membrane protein topology plots and helical wheels.\n"
+"\n"
+"date: 2011-09-27 18:18:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-textopo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-coil"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textopo"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-cox:texlive-pst-cox-doc)
+#. description(texlive-specs-w:texlive-textopo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-cox"
+msgid "This package includes the documentation for texlive-textopo"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-dbicons:texlive-pst-dbicons-doc)
+#. summary(texlive-specs-w:texlive-textpath)
+msgid "Setting text along a path with MetaPost"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-textpath)
+msgid ""
+"This MetaPost package provides macros to typeset text along a free path with the help of LaTeX, thereby preserving kerning and allowing for 8-bit input (accented characters).\n"
+"\n"
+"date: 2012-06-27 20:19:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-textpath-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-dbicons"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textpath"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-diffraction:texlive-pst-diffraction-doc)
+#. description(texlive-specs-w:texlive-textpath-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-diffraction"
+msgid "This package includes the documentation for texlive-textpath"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-electricfield:texlive-pst-electricfield-doc)
+#. summary(texlive-specs-w:texlive-textpos)
+msgid "Place boxes at arbitrary positions on the LaTeX page"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-textpos)
+msgid ""
+"A package to facilitate placement of boxes at absolute positions on the LaTeX page. There are several reasons why this might be useful, an important one being to help the creation of large-format conference posters.\n"
+"\n"
+"date: 2014-01-04 07:41:38 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-textpos-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-electricfield"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-textpos"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-eps:texlive-pst-eps-doc)
+#. description(texlive-specs-w:texlive-textpos-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-eps"
+msgid "This package includes the documentation for texlive-textpos"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-eucl:texlive-pst-eucl-doc)
+#. summary(texlive-specs-w:texlive-texware)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-eucl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "KDE utility programs for laptop users"
+msgid "Utility programs for use with TeX"
+msgstr "Pomocné programu pro laptopy v KDE"
-#. description(texlive-pst-exa:texlive-pst-exa-doc)
+#. description(texlive-specs-w:texlive-texware)
+msgid ""
+"Basic utitility programs, comprising: - dvitype, which converts a TeX output (DVI) file to a plain text file (see also the DVI Text Language suite); - pooltype, which converts a TeX-suite program's \"pool\" (string) file into human-readable form; and - tftopl and pltotf, which convert TeX Font Metric (TFM) file to human readable Property List (PL) files and vice versa.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tfrupee)
+msgid "A font offering the new (Indian) Rupee symbol"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tfrupee)
+msgid ""
+"The package provides LaTeX support for the (Indian) Rupee symbol font, created by TechFat. The original font has been converted to Adobe Type 1 format, and simple LaTeX support written for its use.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tfrupee-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-exa"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tfrupee"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-fill:texlive-pst-fill-doc)
+#. description(texlive-specs-w:texlive-tfrupee-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-fill"
+msgid "This package includes the documentation for texlive-tfrupee"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-fit:texlive-pst-fit-doc)
-msgid "This package includes the documentation for texlive-pst-fit"
+#. summary(texlive-specs-w:texlive-tfrupee-fonts)
+msgid "Severed fonts for texlive-tfrupee"
msgstr ""
-#. description(texlive-pst-fr3d:texlive-pst-fr3d-doc)
+#. description(texlive-specs-w:texlive-tfrupee-fonts)
+msgid "The separated fonts package for texlive-tfrupee"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thalie)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-fr3d"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset drama plays"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-pst-fractal:texlive-pst-fractal-doc)
+#. description(texlive-specs-w:texlive-thalie)
+msgid ""
+"The package provides tools to typeset drama plays. It defines commands to introduce characters' lines, to render stage directions, to divide a play into acts and scenes and to build the dramatis personae automatically.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thalie-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-fractal"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thalie"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-fun:texlive-pst-fun-doc)
+#. description(texlive-specs-w:texlive-thalie-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-fun"
+msgid "This package includes the documentation for texlive-thalie"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-func:texlive-pst-func-doc)
+#. summary(texlive-specs-w:texlive-theoremref)
+msgid "References with automatic theorem names"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-theoremref)
+msgid ""
+"The theoremref package provides variants of the \\label and \\ref commands for theorem-like environments, capable of automatically typesetting references including the theorem name (apart from the theorem number). The scheme is particularly valuable if the author decides to change a lemma to a proposition or a theorem (or whatever).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-theoremref-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-func"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-theoremref"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-gantt:texlive-pst-gantt-doc)
+#. description(texlive-specs-w:texlive-theoremref-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-gantt"
+msgid "This package includes the documentation for texlive-theoremref"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-geo:texlive-pst-geo-doc)
+#. summary(texlive-specs-w:texlive-thesis-ekf)
+msgid "Thesis class for Eszterhazy Karoly College"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thesis-ekf)
+msgid ""
+"The distribution contains the files to generate the thesis class, only.\n"
+"\n"
+"date: 2014-05-21 22:39:42 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thesis-ekf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-geo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thesis-ekf"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-ghsb:texlive-pst-ghsb-doc)
+#. description(texlive-specs-w:texlive-thesis-ekf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-ghsb"
+msgid "This package includes the documentation for texlive-thesis-ekf"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-gr3d:texlive-pst-gr3d-doc)
+#. summary(texlive-specs-w:texlive-thesis-titlepage-fhac)
+msgid "Little style to create a standard titlepage for diploma thesis"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thesis-titlepage-fhac)
+msgid ""
+"Yet another thesis titlepage style: support of Fachhochschule Aachen (Standort Juelich)\n"
+"\n"
+"date: 2012-02-09 20:58:23 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thesis-titlepage-fhac-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-gr3d"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thesis-titlepage-fhac"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-grad:texlive-pst-grad-doc)
+#. description(texlive-specs-w:texlive-thesis-titlepage-fhac-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-grad"
+msgid "This package includes the documentation for texlive-thesis-titlepage-fhac"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-graphicx:texlive-pst-graphicx-doc)
+#. summary(texlive-specs-w:texlive-thinsp)
+msgid "A stretchable \\thinspace for LaTeX"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thinsp)
+msgid ""
+"The package redefines \\thinspace to have a stretch component.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thinsp-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-graphicx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thinsp"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-infixplot:texlive-pst-infixplot-doc)
+#. description(texlive-specs-w:texlive-thinsp-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-infixplot"
+msgid "This package includes the documentation for texlive-thinsp"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-jtree:texlive-pst-jtree-doc)
+#. summary(texlive-specs-w:texlive-thmbox)
+msgid "Decorate theorem statements"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thmbox)
+msgid ""
+"The package defines an environment thmbox that presents theorems, definitions and similar objects in boxes decorated with frames and various aesthetic features. The standard macro \\newtheorem may be redefined to use the environment.\n"
+"\n"
+"date: 2012-04-27 09:57:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thmbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-jtree"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thmbox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-knot:texlive-pst-knot-doc)
+#. description(texlive-specs-w:texlive-thmbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-knot"
+msgid "This package includes the documentation for texlive-thmbox"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-labo:texlive-pst-labo-doc)
+#. summary(texlive-specs-w:texlive-thmtools)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-labo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Extensions to theorem environments"
+msgstr "SSL rozšíření k perl-ladp"
-#. description(texlive-pst-layout:texlive-pst-layout-doc)
+#. description(texlive-specs-w:texlive-thmtools)
+msgid ""
+"The bundle provides several packages for commonly-needed support for typesetting theorems. The packages should work with kernel theorems (theorems 'out of the box' with LaTeX), and the theorem and amsthm packages. Features of the bundle include: a key-value interface to \\newtheorem; a \\listoftheorems command; hyperref and autoref compatibility; a mechanism for restating entire theorems in a single macro call.\n"
+"\n"
+"date: 2014-04-21 19:11:50 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thmtools-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-layout"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thmtools"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-lens:texlive-pst-lens-doc)
+#. description(texlive-specs-w:texlive-thmtools-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-lens"
+msgid "This package includes the documentation for texlive-thmtools"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-light3d:texlive-pst-light3d-doc)
+#. summary(texlive-specs-w:texlive-threadcol)
+msgid "Organize document columns into PDF \"article thread\""
+msgstr ""
+
+#. description(texlive-specs-w:texlive-threadcol)
+msgid ""
+"The package combines a document's columns into a PDF \"article thread\". PDF readers that support this mechanism (probably Adobe Acrobat/Reader only) can be instructed to scroll automatically from column to column, which facilitates on- screen reading of two-column documents. Even for single-column documents, threadcol supports the creation of multiple article threads, which help organize discontiguous but logically related regions of text into a form that the user can scroll through as if its contents were contiguous.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-threadcol-doc)
+msgid "Documentation for texlive-threadcol"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-threadcol-doc)
+msgid "This package includes the documentation for texlive-threadcol"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-threeddice)
+msgid "Create images of dice with one, two, or three faces showing, using MetaPost"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-threeddice)
+msgid ""
+"The package provides MetaPost code to create all possible symmetrical views (up to rotation) of a right-handed die. Configuration is possible by editing the source code, following the guidance in the documentation.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-threeddice-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-light3d"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-threeddice"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-magneticfield:texlive-pst-magneticfield-doc)
+#. description(texlive-specs-w:texlive-threeddice-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-magneticfield"
+msgid "This package includes the documentation for texlive-threeddice"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-math:texlive-pst-math-doc)
+#. summary(texlive-specs-w:texlive-threeparttable)
+msgid "Tables with captions and notes all the same width"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-threeparttable)
+msgid ""
+"Provides a scheme for tables that have a structured note section, after the caption. This scheme provides an answer to the old problem of putting footnotes in tables -- by making footnotes entirely unnecessary. Note that a threeparttable is not a float of itself; but you can place it in a table or a table* environment, if necessary.\n"
+"\n"
+"date: 2011-10-17 16:01:19 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-threeparttable-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-math"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-threeparttable"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-mirror:texlive-pst-mirror-doc)
+#. description(texlive-specs-w:texlive-threeparttable-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-mirror"
+msgid "This package includes the documentation for texlive-threeparttable"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-node:texlive-pst-node-doc)
+#. summary(texlive-specs-w:texlive-threeparttablex)
+msgid "Notes in longtables"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-threeparttablex)
+msgid ""
+"The package provides the functionality of the threeparttable package to tables created using the longtable package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-threeparttablex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-node"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-threeparttablex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-ob3d:texlive-pst-ob3d-doc)
+#. description(texlive-specs-w:texlive-threeparttablex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-ob3d"
+msgid "This package includes the documentation for texlive-threeparttablex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-ode:texlive-pst-ode-doc)
-msgid "This package includes the documentation for texlive-pst-ode"
+#. summary(texlive-specs-w:texlive-thumb)
+msgid "Thumb marks in documents"
msgstr ""
-#. description(texlive-pst-optexp:texlive-pst-optexp-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-optexp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-thumb)
+msgid ""
+"Place thumb marks in books, manuals and reference maunals.\n"
+"\n"
+"date: 2012-04-27 10:20:53 +0000"
+msgstr ""
-#. description(texlive-pst-optic:texlive-pst-optic-doc)
+#. summary(texlive-specs-w:texlive-thumb-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-optic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thumb"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-osci:texlive-pst-osci-doc)
+#. description(texlive-specs-w:texlive-thumb-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-osci"
+msgid "This package includes the documentation for texlive-thumb"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-pad:texlive-pst-pad-doc)
+#. summary(texlive-specs-w:texlive-thumbpdf)
+msgid "Thumbnails for pdfTeX and dvips/ps2pdf"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thumbpdf)
+msgid ""
+"A Perl script that provides support for thumbnails in pdfTeX and dvips/ps2pdf. The script uses ghostscript to generate the thumbnails which get represented in a TeX readable file that is read by the package thumbpdf.sty to automatically include the thumbnails. This arrangement works with both plain TeX and LaTeX.\n"
+"\n"
+"date: 2012-11-14 17:32:01 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thumbpdf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-pad"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thumbpdf"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-pdf:texlive-pst-pdf-doc)
+#. description(texlive-specs-w:texlive-thumbpdf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-pdf"
+msgid "This package includes the documentation for texlive-thumbpdf"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-pdgr:texlive-pst-pdgr-doc)
+#. summary(texlive-specs-w:texlive-thumbs)
+msgid "Create thumb indexes"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thumbs)
+msgid ""
+"The package puts running, customizable thumb marks in the outer margin, moving downward as the chapter number (or whatever shall be marked by the thumb marks) increases. Additionally an overview page/table of thumb marks can be added automatically, which gives the names of the thumbed objects, the page where the object/thumb mark first appears, and the thumb mark itself at its correct position. The thumb marks are useful for large documents (such as reference guides, anthologies, etc.), where a quick and easy way to find (for example) a chapter is needed.\n"
+"\n"
+"date: 2014-03-11 23:15:37 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thumbs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-pdgr"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thumbs"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-platon:texlive-pst-platon-doc)
+#. description(texlive-specs-w:texlive-thumbs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-platon"
+msgid "This package includes the documentation for texlive-thumbs"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-plot:texlive-pst-plot-doc)
+#. summary(texlive-specs-w:texlive-thumby)
+msgid "Create thumb indexes for printed books"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thumby)
+msgid ""
+"The package can generate thumb indexes for your document. It features printing thumb indexes on one- or two-sided pages, along with background- and foreground-color selection and full LaTeX styling of the chapter numbers in the thumb indexes. The height of each thumb index is automatically chosen based on the number of chapters in your document, while the width is chosen by the user. The package is designed to work with the memoir class, and also requires PerlTeX and tikz/\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thumby-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-plot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thumby"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-poly:texlive-pst-poly-doc)
+#. description(texlive-specs-w:texlive-thumby-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-poly"
+msgid "This package includes the documentation for texlive-thumby"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-pulley:texlive-pst-pulley-doc)
+#. summary(texlive-specs-w:texlive-thuthesis)
+msgid "Thesis template for Tsinghua University"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-thuthesis)
+msgid ""
+"ThuThesis is a LaTeX thesis template package for Tsinghua University in order to make it easy to write theses for either bachelor's, master's or doctor's degree.\n"
+"\n"
+"date: 2011-10-24 16:16:30 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-thuthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-pulley"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-thuthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-qtree:texlive-pst-qtree-doc)
+#. description(texlive-specs-w:texlive-thuthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-qtree"
+msgid "This package includes the documentation for texlive-thuthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-rubans:texlive-pst-rubans-doc)
+#. summary(texlive-specs-w:texlive-ticket)
+msgid "Make labels, visiting-cards, pins with LaTeX"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-ticket)
+msgid ""
+"Provides an easy to handle interface to produce visiting cards, labels for your files, stickers, pins and other stuff for your office, conferences etc. All you need is a definition of your 'ticket' included in a ticket definition file and the two commands \\ticketdefault and \\ticket.\n"
+"\n"
+"date: 2012-04-27 10:20:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-ticket-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-rubans"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ticket"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-sigsys:texlive-pst-sigsys-doc)
+#. description(texlive-specs-w:texlive-ticket-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-sigsys"
+msgid "This package includes the documentation for texlive-ticket"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-slpe:texlive-pst-slpe-doc)
+#. summary(texlive-specs-w:texlive-tie)
+msgid "Allow multiple web change files"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tie)
+msgid ""
+"Tie was originally developed to allow web programmers to apply more than one change file to their source. The program may also be used to create a new version of a .web file that incorporates existing changes.\n"
+"\n"
+"date: 2014-01-03 11:10:34 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-3dplot)
+msgid "Coordinate transformation styles for 3d plotting in TikZ"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikz-3dplot)
+msgid ""
+"The package provides straightforward ways to define three- dimensional coordinate frames through which to plot in TikZ. The user can specify the orientation of the main coordinate frame, and use standard TikZ commands and coordinates to render their tikzfigure. A secondary coordinate frame is provided to allow rotations and translations with respect to the main coordinate frame. In addition, the package can also handle plotting user-specified functions in spherical polar coordinates, where both the radius and fill color can be expressed as parametric functions of polar angles.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-3dplot-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-slpe"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-3dplot"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-solarsystem:texlive-pst-solarsystem-doc)
+#. description(texlive-specs-w:texlive-tikz-3dplot-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-solarsystem"
+msgid "This package includes the documentation for texlive-tikz-3dplot"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-solides3d:texlive-pst-solides3d-doc)
+#. summary(texlive-specs-w:texlive-tikz-bayesnet)
+msgid "Draw Bayesian networks, graphical models and directed factor graphs"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikz-bayesnet)
+msgid ""
+"The package provides a library supporting the display of Bayesian networks, graphical models and (directed) factor graphs in LaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-cd)
+msgid "Create commutative diagrams with TikZ"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikz-cd)
+msgid ""
+"The general-purpose drawing package TiKZ can be used to typeset commutative diagrams and other kinds of mathematical pictures, generating high-quality results. The purpose of this package is to make the process of creation of such diagrams easier by providing a convenient set of macros and reasonable default settings. This package also includes an arrow tip library that match closely the arrows present in the Computer Modern typeface.\n"
+"\n"
+"date: 2014-03-08 05:15:50 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-cd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-solides3d"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-cd"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-soroban:texlive-pst-soroban-doc)
+#. description(texlive-specs-w:texlive-tikz-cd-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-soroban"
+msgid "This package includes the documentation for texlive-tikz-cd"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-spectra:texlive-pst-spectra-doc)
+#. summary(texlive-specs-w:texlive-tikz-dependency)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-spectra"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "A library for drawing dependency graphs"
+msgstr "Knihovna pro jazyk C pro syntaktickou analýzu parametrů z příkazového řádku"
-#. description(texlive-pst-stru:texlive-pst-stru-doc)
+#. description(texlive-specs-w:texlive-tikz-dependency)
+msgid ""
+"The package provides a library that draws together existing TikZ facilities to make a comfortable environment for drawing dependency graphs. Basic facilities of the package include a lot of styling facilities, to let you personalize the look and feel of the graphs.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-dependency-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-stru"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-dependency"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-text:texlive-pst-text-doc)
+#. description(texlive-specs-w:texlive-tikz-dependency-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-text"
+msgid "This package includes the documentation for texlive-tikz-dependency"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-thick:texlive-pst-thick-doc)
+#. summary(texlive-specs-w:texlive-tikz-inet)
+msgid "Draw interaction nets with TikZ"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikz-inet)
+msgid ""
+"The package extends TikZ with macros to draw interaction nets.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-inet-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-thick"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-inet"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-tools:texlive-pst-tools-doc)
+#. description(texlive-specs-w:texlive-tikz-inet-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-tools"
+msgid "This package includes the documentation for texlive-tikz-inet"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-tree:texlive-pst-tree-doc)
+#. summary(texlive-specs-w:texlive-tikz-opm)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-tree"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Typeset OPM diagrams"
+msgstr "Program pro sázení not"
-#. description(texlive-pst-tvz:texlive-pst-tvz-doc)
+#. description(texlive-specs-w:texlive-tikz-opm)
+msgid ""
+"Typeset OPM (Object-Process Methodology) diagrams using LaTeX and pgf/TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-opm-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-tvz"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-opm"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst-uml:texlive-pst-uml-doc)
+#. description(texlive-specs-w:texlive-tikz-opm-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-uml"
+msgid "This package includes the documentation for texlive-tikz-opm"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pst-vectorian:texlive-pst-vectorian-doc)
-msgid "This package includes the documentation for texlive-pst-vectorian"
+#. summary(texlive-specs-w:texlive-tikz-qtree)
+msgid "Use existing qtree syntax for trees in TikZ"
msgstr ""
-#. description(texlive-pst-vowel:texlive-pst-vowel-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pst-vowel"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-tikz-qtree)
+msgid ""
+"The package provides a macro for drawing trees with TikZ using the easy syntax of Alexis Dimitriadis' Qtree. It improves on TikZ's standard tree-drawing facility by laying out tree nodes without collisions; it improves on Qtree by adding lots of features from TikZ (for example, edge labels, arrows between nodes); and it improves on pst-qtree in being usable with pdfTeX and XeTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-pst-vue3d:texlive-pst-vue3d-doc)
+#. summary(texlive-specs-w:texlive-tikz-qtree-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst-vue3d"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-qtree"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pst2pdf:texlive-pst2pdf-doc)
+#. description(texlive-specs-w:texlive-tikz-qtree-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pst2pdf"
+msgid "This package includes the documentation for texlive-tikz-qtree"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pstool:texlive-pstool-doc)
+#. summary(texlive-specs-w:texlive-tikz-timing)
+msgid "Easy generation of timing diagrams as tikz pictures"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikz-timing)
+msgid ""
+"This package provides macros and an environment to generate timing diagrams (digital waveforms) without much effort. The TikZ package is used to produce the graphics. The diagrams may be inserted into text (paragraphs, \\hbox, etc.) and into tikzpictures. A tabular-like environment is provided to produce larger timing diagrams.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikz-timing-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pstool"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikz-timing"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pstools:texlive-pstools-doc)
+#. description(texlive-specs-w:texlive-tikz-timing-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pstools"
+msgid "This package includes the documentation for texlive-tikz-timing"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-pstricks:texlive-pstricks-doc)
+#. summary(texlive-specs-w:texlive-tikzinclude)
+msgid "Import TikZ images from colletions"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzinclude)
+msgid ""
+"The package addresses the problem of importing only one TikZ- image from a file holding multiple images.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzinclude-doc)
+msgid "Documentation for texlive-tikzinclude"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzinclude-doc)
+msgid "This package includes the documentation for texlive-tikzinclude"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzmark)
+msgid "Use TikZ's method of remembering a position on a page"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzmark)
+msgid ""
+"The tikzmark package defines a command to \"remember\" a position on a page for later (or earlier) use, primarily (but not exclusively) with TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzmark-doc)
+msgid "Documentation for texlive-tikzmark"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzmark-doc)
+msgid "This package includes the documentation for texlive-tikzmark"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzorbital)
+msgid "Atomic and molecular orbitals using TiKZ"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzorbital)
+msgid ""
+"Atomic s, p and d orbitals may be drawn, as well as molecular orbital diagrams.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzorbital-doc)
+msgid "Documentation for texlive-tikzorbital"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzorbital-doc)
+msgid "This package includes the documentation for texlive-tikzorbital"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzpagenodes)
+msgid "A single TikZ node for the whole page"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzpagenodes)
+msgid ""
+"The package provides special PGF/TikZ nodes for the text, marginpar, footer and header area of the current page. They are inspired by the 'current page' node defined by PGF/TikZ itself.\n"
+"\n"
+"date: 2014-01-09 11:53:44 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzpagenodes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pstricks"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikzpagenodes"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-pstricks-add:texlive-pstricks-add-doc)
+#. description(texlive-specs-w:texlive-tikzpagenodes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-pstricks-add"
+msgid "This package includes the documentation for texlive-tikzpagenodes"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-psu-thesis:texlive-psu-thesis-doc)
+#. summary(texlive-specs-w:texlive-tikzpfeile)
+msgid "Draw arrows using PGF/TikZ"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tikzpfeile)
+msgid ""
+"In a document with a lot of diagrams created with PGF/TikZ, there is a possibility of the reader being distracted by different sorts of arrowheads in the diagrams and in the text (as, e.g., in \\rightarrow). The package defines macros to create all arrows using PGF/TikZ, so as to avoid the problem.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tikzpfeile-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-psu-thesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tikzpfeile"
+msgstr "Dokumentace pro gawk"
-#. description(texlive-ptex:texlive-ptex-doc)
+#. description(texlive-specs-w:texlive-tikzpfeile-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ptex"
+msgid "This package includes the documentation for texlive-tikzpfeile"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ptex2pdf:texlive-ptex2pdf-doc)
-msgid "This package includes the documentation for texlive-ptex2pdf"
+#. summary(texlive-specs-w:texlive-tikzposter)
+msgid "Create scientific posters using TikZ"
msgstr ""
-#. description(texlive-ptext:texlive-ptext-doc)
-msgid "This package includes the documentation for texlive-ptext"
+#. description(texlive-specs-w:texlive-tikzposter)
+msgid ""
+"A document class provides a simple way of using TikZ for generating posters. Several formatting options are available, and spacing and layout of the poster is to a large extent automated.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-ptptex:texlive-ptptex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ptptex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-tikzposter-doc)
+msgid "Documentation for texlive-tikzposter"
+msgstr ""
-#. description(texlive-punk:texlive-punk-doc)
-msgid "This package includes the documentation for texlive-punk"
+#. description(texlive-specs-w:texlive-tikzposter-doc)
+msgid "This package includes the documentation for texlive-tikzposter"
msgstr ""
-#. description(texlive-punk-latex:texlive-punk-latex-doc)
-msgid "This package includes the documentation for texlive-punk-latex"
+#. summary(texlive-specs-w:texlive-tikzscale)
+msgid "Resize pictures while respecting text size"
msgstr ""
-#. description(texlive-punknova:texlive-punknova-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-punknova"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-tikzscale)
+msgid ""
+"The package extends the \\includegraphics command to support tikzpictures. It allows scaling of TikZ images and PGFPlots to a given width or height without changing the text size.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-purifyeps:texlive-purifyeps-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-purifyeps"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-tikzscale-doc)
+msgid "Documentation for texlive-tikzscale"
+msgstr ""
-#. description(texlive-pxbase:texlive-pxbase-doc)
-msgid "This package includes the documentation for texlive-pxbase"
+#. description(texlive-specs-w:texlive-tikzscale-doc)
+msgid "This package includes the documentation for texlive-tikzscale"
msgstr ""
-#. description(texlive-pxchfon:texlive-pxchfon-doc)
-msgid "This package includes the documentation for texlive-pxchfon"
+#. summary(texlive-specs-w:texlive-tikzsymbols)
+msgid "Some symbols created using TikZ"
msgstr ""
-#. description(texlive-pxcjkcat:texlive-pxcjkcat-doc)
-msgid "This package includes the documentation for texlive-pxcjkcat"
+#. description(texlive-specs-w:texlive-tikzsymbols)
+msgid ""
+"The package provides various emoticons, cooking symbols and trees.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-pxfonts:texlive-pxfonts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pxfonts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-tikzsymbols-doc)
+msgid "Documentation for texlive-tikzsymbols"
+msgstr ""
-#. description(texlive-pxgreeks:texlive-pxgreeks-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pxgreeks"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-tikzsymbols-doc)
+msgid "This package includes the documentation for texlive-tikzsymbols"
+msgstr ""
-#. description(texlive-pxjahyper:texlive-pxjahyper-doc)
-msgid "This package includes the documentation for texlive-pxjahyper"
+#. summary(texlive-specs-w:texlive-times-fonts)
+msgid "Severed fonts for texlive-times"
msgstr ""
-#. description(texlive-pxpgfmark:texlive-pxpgfmark-doc)
-msgid "This package includes the documentation for texlive-pxpgfmark"
+#. description(texlive-specs-w:texlive-times-fonts)
+msgid "The separated fonts package for texlive-times"
msgstr ""
-#. description(texlive-pxrubrica:texlive-pxrubrica-doc)
-msgid "This package includes the documentation for texlive-pxrubrica"
+#. summary(texlive-specs-w:texlive-timetable)
+msgid "Generate timetables"
msgstr ""
-#. description(texlive-pxtxalfa:texlive-pxtxalfa-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-pxtxalfa"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-timetable)
+msgid ""
+"A highly-configurable package, with nice output and simple input. The macros use a radix sort mechanism so that the order of input is not critical.\n"
+"\n"
+"date: 2012-07-10 15:27:46 +0000"
+msgstr ""
-#. description(texlive-python:texlive-python-doc)
-msgid "This package includes the documentation for texlive-python"
+#. summary(texlive-specs-w:texlive-timing-diagrams)
+msgid "Draw timing diagrams"
msgstr ""
-#. description(texlive-qcm:texlive-qcm-doc)
+#. description(texlive-specs-w:texlive-timing-diagrams)
+msgid ""
+"The package provides commands to draw and annotate various kinds of timing diagrams, using Tikz. Documentation is sparse, but the source and the examples file should be of some use.\n"
+"\n"
+"date: 2014-04-27 11:42:31 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-timing-diagrams-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-qcm"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-timing-diagrams"
+msgstr "Dokumentace pro digiKam"
-#. description(texlive-qobitree:texlive-qobitree-doc)
+#. description(texlive-specs-w:texlive-timing-diagrams-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-qobitree"
+msgid "This package includes the documentation for texlive-timing-diagrams"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-qpxqtx:texlive-qpxqtx-doc)
+#. summary(texlive-specs-w:texlive-tipa)
+msgid "Fonts and macros for IPA phonetics characters"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tipa)
+msgid ""
+"These fonts are considered the 'ultimate answer' to IPA typesetting. The encoding of these 8-bit fonts has been registered as LaTeX standard encoding T3, and the set of addendum symbols as encoding TS3. 'Times-like' Adobe Type 1 versions are provided for both the T3 and the TS3 fonts.\n"
+"\n"
+"date: 2012-01-30 09:59:21 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tipa-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-qpxqtx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "German translations for KOffice"
+msgid "German translation of tipa documentation"
+msgstr "Německé překlady pro KOffice"
-#. description(texlive-qstest:texlive-qstest-doc)
+#. description(texlive-specs-w:texlive-tipa-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-qstest"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a translation of Fukui Rei's tipaman from the tipa bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-qsymbols:texlive-qsymbols-doc)
+#. summary(texlive-specs-w:texlive-tipa-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-qsymbols"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tipa"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-qtree:texlive-qtree-doc)
+#. description(texlive-specs-w:texlive-tipa-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-qtree"
+msgid "This package includes the documentation for texlive-tipa"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-quattrocento:texlive-quattrocento-doc)
-msgid "This package includes the documentation for texlive-quattrocento"
+#. summary(texlive-specs-w:texlive-tipa-fonts)
+msgid "Severed fonts for texlive-tipa"
msgstr ""
-#. description(texlive-quotchap:texlive-quotchap-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-quotchap"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-tipa-fonts)
+msgid "The separated fonts package for texlive-tipa"
+msgstr ""
-#. description(texlive-quoting:texlive-quoting-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-quoting"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-titlecaps)
+msgid "Setting rich-text input into Titling Caps"
+msgstr ""
-#. description(texlive-quotmark:texlive-quotmark-doc)
+#. description(texlive-specs-w:texlive-titlecaps)
+msgid ""
+"The package is intended for setting rich text into titling capitals (in which the first character of words are capitalized). It automatically accounts for diacritical marks (like umlauts), national symbols (like \"ae\"), punctuation, and font changing commands that alter the appearance or size of the text. It allows a list of predesignated words to be protected as lower-cased, and also allows for titling exceptions of various sorts.\n"
+"\n"
+"date: 2013-06-24 11:30:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titlecaps-doc)
+msgid "Documentation for texlive-titlecaps"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-titlecaps-doc)
+msgid "This package includes the documentation for texlive-titlecaps"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titlefoot)
+msgid "Add special material to footer of title page"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-titlefoot)
+msgid ""
+"Provides the capability of adding keywords (with a \\keywords command), a running title (\\runningtitle), AMS subject classifications (\\amssubj), and an 'author's footnote' as footnotes to the title or first page of a document. Works with any class for which the \\thanks macro works (e.g., article).\n"
+"\n"
+"date: 2012-07-24 14:30:52 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titlepages)
+msgid "Sample titlepages, and how to code them"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-titlepages)
+msgid ""
+"The document provides examples of over two dozen title page designs based on a range of published books and theses, together with the LaTeX code used to create them.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titlepic)
+msgid "Add picture to title page of a document"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-titlepic)
+msgid ""
+"The package allows you to place a picture on the title page (cover page) of a LaTeX document. Example of usage: \\usepackage[cc]{titlepic} \\usepackage{graphicx} \\titlepic{\\includegraphics[width=\\textwidth]{picture.png}} The package currently only works with the document classes article, report and book.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titlepic-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-quotmark"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-titlepic"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-r_und_s:texlive-r_und_s-doc)
+#. description(texlive-specs-w:texlive-titlepic-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-r_und_s"
+msgid "This package includes the documentation for texlive-titlepic"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-raleway:texlive-raleway-doc)
-msgid "This package includes the documentation for texlive-raleway"
+#. summary(texlive-specs-w:texlive-titleref)
+msgid "A \"\\titleref\" command to cross-reference section titles"
msgstr ""
-#. description(texlive-ran_toks:texlive-ran_toks-doc)
-msgid "This package includes the documentation for texlive-ran_toks"
+#. description(texlive-specs-w:texlive-titleref)
+msgid ""
+"Defines a command \\titleref that allows you to cross-reference section (and chapter, etc) titles and captions just like \\ref and \\pageref. The package does not interwork with hyperref; if you need hypertext capabilities, use nameref instead.\n"
+"\n"
+"date: 2012-03-07 11:52:16 +0000"
msgstr ""
-#. description(texlive-randbild:texlive-randbild-doc)
+#. summary(texlive-specs-w:texlive-titleref-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-randbild"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-titleref"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-randomwalk:texlive-randomwalk-doc)
+#. description(texlive-specs-w:texlive-titleref-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-randomwalk"
+msgid "This package includes the documentation for texlive-titleref"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-randtext:texlive-randtext-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-randtext"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-w:texlive-titlesec)
+msgid "Select alternative section titles"
+msgstr ""
-#. description(texlive-rccol:texlive-rccol-doc)
+#. description(texlive-specs-w:texlive-titlesec)
+msgid ""
+"A package providing an interface to sectioning commands for selection from various title styles. E.g., marginal titles and to change the font of all headings with a single command, also providing simple one-step page styles. Also includes a package to change the page styles when there are floats in a page. You may assign headers/footers to individual floats, too.\n"
+"\n"
+"date: 2012-05-01 14:59:50 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titlesec-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rccol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-titlesec"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rcs:texlive-rcs-doc)
+#. description(texlive-specs-w:texlive-titlesec-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rcs"
+msgid "This package includes the documentation for texlive-titlesec"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rcs-multi:texlive-rcs-multi-doc)
+#. summary(texlive-specs-w:texlive-titling)
+msgid "Control over the typesetting of the \\maketitle command"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-titling)
+msgid ""
+"The titling package provides control over the typesetting of the \\maketitle command and \\thanks commands, and makes the \\title, \\author and \\date information permanently available. Multiple titles are allowed in a single document. New titling elements can be added and a titlepage title can be centered on a physical page.\n"
+"\n"
+"date: 2012-07-24 18:02:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-titling-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rcs-multi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-titling"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rcsinfo:texlive-rcsinfo-doc)
+#. description(texlive-specs-w:texlive-titling-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rcsinfo"
+msgid "This package includes the documentation for texlive-titling"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-readarray:texlive-readarray-doc)
-msgid "This package includes the documentation for texlive-readarray"
+#. summary(texlive-specs-w:texlive-tkz-base)
+msgid "Tools for drawing with a cartesian coordinate system"
msgstr ""
-#. description(texlive-realboxes:texlive-realboxes-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-realboxes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-tkz-base)
+msgid ""
+"The bundle is a set of packages, designed to give mathematics teachers (and students) easy access to programming of drawings with TikZ.\n"
+"\n"
+"date: 2012-06-24 17:27:06 +0000"
+msgstr ""
-#. description(texlive-realscripts:texlive-realscripts-doc)
+#. summary(texlive-specs-w:texlive-tkz-base-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-realscripts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-base"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rec-thy:texlive-rec-thy-doc)
+#. description(texlive-specs-w:texlive-tkz-base-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rec-thy"
+msgid "This package includes the documentation for texlive-tkz-base"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-recipe:texlive-recipe-doc)
+#. summary(texlive-specs-w:texlive-tkz-berge)
+msgid "Macros for drawing graphs of graph theory"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tkz-berge)
+msgid ""
+"The package provides a collection of useful macros for drawing classic graphs of graph theory, or to make other graphs.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-berge-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-recipe"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-berge"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-recipecard:texlive-recipecard-doc)
+#. description(texlive-specs-w:texlive-tkz-berge-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-recipecard"
+msgid "This package includes the documentation for texlive-tkz-berge"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rectopma:texlive-rectopma-doc)
+#. summary(texlive-specs-w:texlive-tkz-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rectopma"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation macros for the TKZ series of packages"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-recycle:texlive-recycle-doc)
+#. description(texlive-specs-w:texlive-tkz-doc)
+msgid ""
+"This bundle offers a documentation class (tkz-doc) and a package (tkzexample). These files are used in the documentation of the author's packages tkz-tab and tkz-linknodes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-doc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-recycle"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-doc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-refcheck:texlive-refcheck-doc)
+#. description(texlive-specs-w:texlive-tkz-doc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-refcheck"
+msgid "This package includes the documentation for texlive-tkz-doc"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-refman:texlive-refman-doc)
+#. summary(texlive-specs-w:texlive-tkz-euclide)
#, fuzzy
-msgid "This package includes the documentation for texlive-refman"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Tools for drawing Euclidean geometry"
+msgstr "Nástroje pro IrDA komunikaci"
-#. description(texlive-refstyle:texlive-refstyle-doc)
+#. description(texlive-specs-w:texlive-tkz-euclide)
+msgid ""
+"The tkz-euclide package is a set of files, designed to give math teachers and students) easy access at the programming of Euclidean geometry with TikZ.\n"
+"\n"
+"date: 2012-06-24 23:24:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-euclide-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-refstyle"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-euclide"
+msgstr "Dokumentace pro gawk"
-#. description(texlive-regcount:texlive-regcount-doc)
+#. description(texlive-specs-w:texlive-tkz-euclide-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-regcount"
+msgid "This package includes the documentation for texlive-tkz-euclide"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-regexpatch:texlive-regexpatch-doc)
+#. summary(texlive-specs-w:texlive-tkz-fct)
#, fuzzy
-msgid "This package includes the documentation for texlive-regexpatch"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Tools for testing of various Bluetooth-functions"
+msgid "Tools for drawing graphs of functions"
+msgstr "Testovací nástroje Bluetooth funkcí"
-#. description(texlive-register:texlive-register-doc)
+#. description(texlive-specs-w:texlive-tkz-fct)
+msgid ""
+"The tkz-fct package is designed to give math teachers (and students) easy access to programming graphs of functions with TikZ and gnuplot.\n"
+"\n"
+"date: 2012-06-24 23:24:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-fct-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-register"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-fct"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-regstats:texlive-regstats-doc)
+#. description(texlive-specs-w:texlive-tkz-fct-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-regstats"
+msgid "This package includes the documentation for texlive-tkz-fct"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-relenc:texlive-relenc-doc)
+#. summary(texlive-specs-w:texlive-tkz-graph)
+msgid "Draw graph-theory graphs"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tkz-graph)
+msgid ""
+"The package is designed to create graph diagrams as simply as possible, using TikZ\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-graph-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-relenc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-graph"
+msgstr "Dokumentace pro gawk"
-#. description(texlive-relsize:texlive-relsize-doc)
+#. description(texlive-specs-w:texlive-tkz-graph-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-relsize"
+msgid "This package includes the documentation for texlive-tkz-graph"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-reotex:texlive-reotex-doc)
+#. summary(texlive-specs-w:texlive-tkz-kiviat)
+msgid "Draw Kiviat graphs"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tkz-kiviat)
+msgid ""
+"The package allows the user to draw Kiviat Graphs directly, or with data from an external file. The drawing is done with the help of pgfplots.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-kiviat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-reotex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-kiviat"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-repeatindex:texlive-repeatindex-doc)
+#. description(texlive-specs-w:texlive-tkz-kiviat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-repeatindex"
+msgid "This package includes the documentation for texlive-tkz-kiviat"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-resphilosophica:texlive-resphilosophica-doc)
-msgid "This package includes the documentation for texlive-resphilosophica"
+#. summary(texlive-specs-w:texlive-tkz-linknodes)
+msgid "Link nodes in mathematical environments"
msgstr ""
-#. description(texlive-resumecls:texlive-resumecls-doc)
-msgid "This package includes the documentation for texlive-resumecls"
+#. description(texlive-specs-w:texlive-tkz-linknodes)
+msgid ""
+"The package arose from a requirement to link the elements of an amsmath align or aligned environment. The package makes use of PGF/TikZ. The package documentation relies on the facilities of the tkz-doc bundle\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-resumemac:texlive-resumemac-doc)
+#. summary(texlive-specs-w:texlive-tkz-linknodes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-resumemac"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-linknodes"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-revtex:texlive-revtex-doc)
+#. description(texlive-specs-w:texlive-tkz-linknodes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-revtex"
+msgid "This package includes the documentation for texlive-tkz-linknodes"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-revtex4:texlive-revtex4-doc)
+#. summary(texlive-specs-w:texlive-tkz-orm)
+msgid "Create Object-Role Model (ORM) diagrams,"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tkz-orm)
+msgid ""
+"The package provides styles for drawing Object-Role Model (ORM) diagrams in TeX based on the pgf and TikZ picture environment.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-orm-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-revtex4"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-orm"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rjlparshap:texlive-rjlparshap-doc)
+#. description(texlive-specs-w:texlive-tkz-orm-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rjlparshap"
+msgid "This package includes the documentation for texlive-tkz-orm"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rlepsf:texlive-rlepsf-doc)
+#. summary(texlive-specs-w:texlive-tkz-tab)
+msgid "Tables of signs and variations using PGF/TikZ"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tkz-tab)
+msgid ""
+"The package provides comprehensive facilities for preparing lists of signs and variations, using PGF. The package documentation requires the tkz-doc bundle.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tkz-tab-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rlepsf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tkz-tab"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rmpage:texlive-rmpage-doc)
+#. description(texlive-specs-w:texlive-tkz-tab-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rmpage"
+msgid "This package includes the documentation for texlive-tkz-tab"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-robustcommand:texlive-robustcommand-doc)
+#. summary(texlive-specs-w:texlive-tlc2)
+msgid "Examples from \"The LaTeX Companion\", second edition"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tlc2)
+msgid ""
+"The source of the examples printed in the book, together with necessary supporting files. The book was published by Addison- Wesley, 2004, ISBN 0-201-36299-6.\n"
+"\n"
+"date: 2012-06-24 17:27:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tocbibind)
+msgid "Add bibliography/index/contents to Table of Contents"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tocbibind)
+msgid ""
+"Automatically adds the bibliography and/or the index and/or the contents, etc., to the Table of Contents listing.\n"
+"\n"
+"date: 2012-06-24 17:27:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tocbibind-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-robustcommand"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tocbibind"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-robustindex:texlive-robustindex-doc)
+#. description(texlive-specs-w:texlive-tocbibind-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-robustindex"
+msgid "This package includes the documentation for texlive-tocbibind"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-romanbar:texlive-romanbar-doc)
+#. summary(texlive-specs-w:texlive-tocloft)
+msgid "Control table of contents, figures, etcetera"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tocloft)
+msgid ""
+"Provides control over the typography of the Table of Contents, List of Figures and List of Tables, and the ability to create new `List of ...'. The ToC \\parskip can be changed.\n"
+"\n"
+"date: 2013-05-02 16:21:19 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tocloft-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-romanbar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tocloft"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-romande:texlive-romande-doc)
+#. description(texlive-specs-w:texlive-tocloft-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-romande"
+msgid "This package includes the documentation for texlive-tocloft"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-romanneg:texlive-romanneg-doc)
+#. summary(texlive-specs-w:texlive-tocvsec2)
+msgid "Section numbering and table of contents control"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tocvsec2)
+msgid ""
+"Provides control over section numbering (without recourse to starred sectional commands) and/or the entries in the Table of Contents on a section by section basis.\n"
+"\n"
+"date: 2014-03-10 11:04:22 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tocvsec2-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-romanneg"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tocvsec2"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-romannum:texlive-romannum-doc)
+#. description(texlive-specs-w:texlive-tocvsec2-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-romannum"
+msgid "This package includes the documentation for texlive-tocvsec2"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rotating:texlive-rotating-doc)
+#. summary(texlive-specs-w:texlive-todo)
+msgid "Make a to-do list for a document"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-todo)
+msgid ""
+"The package allows you to insert \"to do\" marks in your document, to make lists of such items, and to cross-reference to them.\n"
+"\n"
+"date: 2012-08-24 13:51:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-todo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rotating"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-todo"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rotfloat:texlive-rotfloat-doc)
+#. description(texlive-specs-w:texlive-todo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rotfloat"
+msgid "This package includes the documentation for texlive-todo"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rotpages:texlive-rotpages-doc)
+#. summary(texlive-specs-w:texlive-todonotes)
+msgid "Marking things to do in a LaTeX document"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-todonotes)
+msgid ""
+"The package lets the user mark things to do later, in a simple and visually appealing way. The package takes several options to enable customization/finetuning of the visual appearance.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-todonotes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rotpages"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-todonotes"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-roundbox:texlive-roundbox-doc)
+#. description(texlive-specs-w:texlive-todonotes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-roundbox"
+msgid "This package includes the documentation for texlive-todonotes"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rrgtrees:texlive-rrgtrees-doc)
-msgid "This package includes the documentation for texlive-rrgtrees"
+#. summary(texlive-specs-w:texlive-tokenizer)
+msgid "A tokenizer"
msgstr ""
-#. description(texlive-rsc:texlive-rsc-doc)
+#. description(texlive-specs-w:texlive-tokenizer)
+msgid ""
+"A tokenizer for LaTeX. \\GetTokens{Target1}{Target2}{Source} splits source into two tokens at the first encounter of a comma. The first token is saved in a newly created command with the name passed as <Target1> and the second token likewise. A package option 'trim' causes leading and trailing space to be removed from each token; with this option, the \\TrimSpaces command is defined, which removes leading and trailing spaces from its argument.\n"
+"\n"
+"date: 2013-11-21 20:33:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tokenizer-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rsc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tokenizer"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rsfs:texlive-rsfs-doc)
+#. description(texlive-specs-w:texlive-tokenizer-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rsfs"
+msgid "This package includes the documentation for texlive-tokenizer"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rsfso:texlive-rsfso-doc)
+#. summary(texlive-specs-w:texlive-toolbox)
#, fuzzy
-msgid "This package includes the documentation for texlive-rsfso"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Various ALSA Tools"
+msgid "Tool macros"
+msgstr "Různé nástroje pro ALSA"
-#. description(texlive-rterface:texlive-rterface-doc)
-msgid "This package includes the documentation for texlive-rterface"
+#. description(texlive-specs-w:texlive-toolbox)
+msgid ""
+"A package for (La)TeX which provides some macros which are convenient for writing indexes, glossaries, or other macros. It contains macros which support: implicit macros; fancy optional arguments; loops over tokenlists and itemlists; searching and splitting; controlled expansion; redefinition of macros; and concatenated macro names; macros for text replacement.\n"
+"\n"
+"date: 2013-11-27 00:19:45 +0000"
msgstr ""
-#. description(texlive-rtkinenc:texlive-rtkinenc-doc)
+#. summary(texlive-specs-w:texlive-toolbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rtkinenc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-toolbox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rtklage:texlive-rtklage-doc)
+#. description(texlive-specs-w:texlive-toolbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rtklage"
+msgid "This package includes the documentation for texlive-toolbox"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-russ:texlive-russ-doc)
+#. summary(texlive-specs-w:texlive-tools)
+msgid "The LaTeX standard tools bundle"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tools)
+msgid ""
+"A collection of (variously) simple tools provided as part of the LaTeX required tools distribution, comprising the packages: afterpage, array, bm, calc, dcolumn, delarray, enumerate, fileerr, fontsmpl, ftnright, hhline, indentfirst, layout, longtable, multicol, rawfonts, showkeys, somedefs, tabularx, theorem, trace, varioref, verbatim, xr, and xspace.\n"
+"\n"
+"date: 2014-05-14 21:49:31 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tools-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-russ"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tools"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-rviewport:texlive-rviewport-doc)
+#. description(texlive-specs-w:texlive-tools-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rviewport"
+msgid "This package includes the documentation for texlive-tools"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-rvwrite:texlive-rvwrite-doc)
+#. summary(texlive-specs-w:texlive-topfloat)
+msgid "Move floats to the top of the page"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-topfloat)
+msgid ""
+"The topfloat package\n"
+"\n"
+"date: 2012-08-24 13:51:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-topfloat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-rvwrite"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-topfloat"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ryethesis:texlive-ryethesis-doc)
+#. description(texlive-specs-w:texlive-topfloat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ryethesis"
+msgid "This package includes the documentation for texlive-topfloat"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sa-tikz:texlive-sa-tikz-doc)
-msgid "This package includes the documentation for texlive-sa-tikz"
+#. summary(texlive-specs-w:texlive-toptesi)
+msgid "Bundle of files for typsetting theses"
msgstr ""
-#. description(texlive-sageep:texlive-sageep-doc)
+#. description(texlive-specs-w:texlive-toptesi)
+msgid ""
+"This bundle contains everything is needed for typesetting a bachelor, master or PhD thesis in Italian (or in any other language supported by LaTeX: the bundle is constructed to support multilingual use). The infix strings may be selected and specified at will by means of a configuration file, so as to customize the layout of the front page to the requirements of a specific university. Thanks to its language management, the bundle is suited for multilanguage theses that are becoming more and more frequent thanks to the double degree programs of the European Community Socrates programs. Toptesi is designed to save the PDF version of a thesis in PDF/A-1b compliant mode and with all the necessary metadata.\n"
+"\n"
+"date: 2013-11-05 17:25:42 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-toptesi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sageep"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-toptesi"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sanskrit:texlive-sanskrit-doc)
+#. description(texlive-specs-w:texlive-toptesi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sanskrit"
+msgid "This package includes the documentation for texlive-toptesi"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sansmath:texlive-sansmath-doc)
+#. summary(texlive-specs-w:texlive-totcount)
+msgid "Find the last value of a counter"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-totcount)
+msgid ""
+"The package records the value that was last set, for any counter of interest; since most such counters are simply incremented when they are changed, the recorded value will usually be the maximum value.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-totcount-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sansmath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-totcount"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sansmathaccent:texlive-sansmathaccent-doc)
+#. description(texlive-specs-w:texlive-totcount-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sansmathaccent"
+msgid "This package includes the documentation for texlive-totcount"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sansmathfonts:texlive-sansmathfonts-doc)
-msgid "This package includes the documentation for texlive-sansmathfonts"
+#. summary(texlive-specs-w:texlive-totpages)
+msgid "Count pages in a document, and report last page number"
msgstr ""
-#. description(texlive-sapthesis:texlive-sapthesis-doc)
+#. description(texlive-specs-w:texlive-totpages)
+msgid ""
+"The package counts the actual pages in the document (as opposed to reporting the number of the last page, as does lastpage). The counter itself may be shipped out to the DVI file. The package uses the everyshi package for its task.\n"
+"\n"
+"date: 2012-03-07 11:52:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-totpages-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sapthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-totpages"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sasnrdisplay:texlive-sasnrdisplay-doc)
+#. description(texlive-specs-w:texlive-totpages-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sasnrdisplay"
+msgid "This package includes the documentation for texlive-totpages"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sauerj:texlive-sauerj-doc)
+#. summary(texlive-specs-w:texlive-tpic2pdftex)
+msgid "Use tpic commands in PDFTeX"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tpic2pdftex)
+msgid ""
+"The AWK script converts pic language, embedded inline (delimited by .PS and .PE markers), to \\pdfliteral commands.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tpslifonts)
+msgid "A LaTeX package for configuring presentation fonts"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tpslifonts)
+msgid ""
+"This package aims to improve presentations in terms of font readability, especially with maths. The standard cm math fonts at large design sizes are difficult to read from far away, especially at low resolutions and low contrast color choice. Using this package leads to much better overall readability of some font combinations. The package offers a couple of 'harmonising' combinations of text and math fonts from the (distant) relatives of computer modern fonts, with a couple of extras for optimising readability. Text fonts from computer modern roman, computer modern sans serif, SliTeX computer modern sans serif, computer modern bright, or concrete roman are available, in addition to math fonts from computer modern math, computer modern bright math, or Euler fonts. The package is part of the TeXPower bundle.\n"
+"\n"
+"date: 2012-04-27 15:14:22 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tpslifonts-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sauerj"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tpslifonts"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sauterfonts:texlive-sauterfonts-doc)
+#. description(texlive-specs-w:texlive-tpslifonts-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sauterfonts"
+msgid "This package includes the documentation for texlive-tpslifonts"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-savefnmark:texlive-savefnmark-doc)
+#. summary(texlive-specs-w:texlive-tqft)
+msgid "Drawing TQFT diagrams with TikZ/PGF"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-tqft)
+msgid ""
+"The package defines some node shapes useful for drawing TQFT diagrams with TikZ/PGF. That is, it defines highly customisable shapes that look like cobordisms between circles, such as those used in TQFT and other mathematical diagrams.\n"
+"\n"
+"date: 2014-04-08 13:56:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-tqft-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-savefnmark"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tqft"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-savetrees:texlive-savetrees-doc)
+#. description(texlive-specs-w:texlive-tqft-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-savetrees"
+msgid "This package includes the documentation for texlive-tqft"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-scale:texlive-scale-doc)
+#. summary(texlive-specs-w:texlive-trajan)
+msgid "Fonts from the Trajan column in Rome"
+msgstr ""
+
+#. description(texlive-specs-w:texlive-trajan)
+msgid ""
+"Provides fonts (both as Metafont source and in Adobe Type 1 format) based on the capitals carved on the Trajan column in Rome in 114 AD, together with macros to access the fonts. Many typographers think these rank first among the Roman's artistic legacy. The font is uppercase letters together with some punctuation and analphabetics; no lowercase or digits.\n"
+"\n"
+"date: 2011-12-20 10:10:50 +0000"
+msgstr ""
+
+#. summary(texlive-specs-w:texlive-trajan-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-scale"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-trajan"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-scalebar:texlive-scalebar-doc)
+#. description(texlive-specs-w:texlive-trajan-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-scalebar"
+msgid "This package includes the documentation for texlive-trajan"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-scalerel:texlive-scalerel-doc)
-msgid "This package includes the documentation for texlive-scalerel"
+#. summary(texlive-specs-w:texlive-trajan-fonts)
+msgid "Severed fonts for texlive-trajan"
msgstr ""
-#. description(texlive-schemabloc:texlive-schemabloc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-schemabloc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-w:texlive-trajan-fonts)
+msgid "The separated fonts package for texlive-trajan"
+msgstr ""
-#. description(texlive-schemata:texlive-schemata-doc)
-msgid "This package includes the documentation for texlive-schemata"
+#. summary(texlive-specs-w:texlive-tram)
+msgid "Typeset tram boxes in LaTeX"
msgstr ""
-#. description(texlive-schulschriften:texlive-schulschriften-doc)
-msgid "This package includes the documentation for texlive-schulschriften"
+#. description(texlive-specs-w:texlive-tram)
+msgid ""
+"Tram boxes are highlighted with patterns of dots; the package defines an environment tram that typesets its content into a tram box. The pattern used may be selected in an optional argument to the environment.\n"
+"\n"
+"date: 2014-04-29 04:13:54 +0000"
msgstr ""
-#. description(texlive-schwalbe-chess:texlive-schwalbe-chess-doc)
+#. summary(texlive-specs-w:texlive-tram-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-schwalbe-chess"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tram"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sciposter:texlive-sciposter-doc)
+#. description(texlive-specs-w:texlive-tram-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sciposter"
+msgid "This package includes the documentation for texlive-tram"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-screenplay:texlive-screenplay-doc)
+#. summary(texlive-specs-w:texlive-translation-array-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-screenplay"
+msgid "French translation of the documentation of array"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-scrjrnl:texlive-scrjrnl-doc)
-msgid "This package includes the documentation for texlive-scrjrnl"
-msgstr ""
-
-#. description(texlive-sdrt:texlive-sdrt-doc)
+#. description(texlive-specs-w:texlive-translation-array-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-sdrt"
+msgid ""
+"A French translation of the documentation of array.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-secdot:texlive-secdot-doc)
+#. summary(texlive-specs-x:texlive-translation-arsclassica-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-secdot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "German version of arsclassica"
+msgstr "KDE klient pro Subversion"
-#. description(texlive-section:texlive-section-doc)
+#. description(texlive-specs-x:texlive-translation-arsclassica-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-section"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a \"translation\" of the arsclassica documentation.\n"
+"\n"
+"date: 2012-08-23 22:56:38 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-sectionbox:texlive-sectionbox-doc)
+#. summary(texlive-specs-x:texlive-translation-biblatex-de)
+msgid "German translation of the documentation of biblatex"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-biblatex-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-sectionbox"
+msgid ""
+"A German translation of the documentation of biblatex.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sectsty:texlive-sectsty-doc)
+#. summary(texlive-specs-x:texlive-translation-chemsym-de)
+msgid "German version of chemsym"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-chemsym-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-sectsty"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a \"translation\" of the chemsym documentation.\n"
+"\n"
+"date: 2012-08-23 22:56:38 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-selectp:texlive-selectp-doc)
+#. summary(texlive-specs-x:texlive-translation-dcolumn-fr)
+msgid "French translation of the documentation of dcolumn"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-dcolumn-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-selectp"
+msgid ""
+"A French translation of the documentation of dcolumn.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-selnolig:texlive-selnolig-doc)
-msgid "This package includes the documentation for texlive-selnolig"
+#. summary(texlive-specs-x:texlive-translation-ecv-de)
+msgid "German version of evc"
msgstr ""
-#. description(texlive-semantic:texlive-semantic-doc)
+#. description(texlive-specs-x:texlive-translation-ecv-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-semantic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a \"translation\" of the ecv documentation.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-semaphor:texlive-semaphor-doc)
+#. summary(texlive-specs-x:texlive-translation-enumitem-de)
+msgid "Enumitem documentation, in German"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-enumitem-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-semaphor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a translation of the manual for enumitem.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-seminar:texlive-seminar-doc)
+#. summary(texlive-specs-x:texlive-translation-europecv-de)
+msgid "German version of europecv"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-europecv-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-seminar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a \"translation\" of the europecv documentation.\n"
+"\n"
+"date: 2012-08-23 21:37:14 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-semioneside:texlive-semioneside-doc)
+#. summary(texlive-specs-x:texlive-translation-filecontents-de)
+msgid "German version of filecontents"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-filecontents-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-semioneside"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a \"translation\" of the filecontents documentation.\n"
+"\n"
+"date: 2012-08-23 21:34:30 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-sepfootnotes:texlive-sepfootnotes-doc)
+#. summary(texlive-specs-x:texlive-translation-moreverb-de)
+msgid "German version of moreverb"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-translation-moreverb-de)
#, fuzzy
-msgid "This package includes the documentation for texlive-sepfootnotes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid ""
+"This is a \"translation\" of the moreverb documentation.\n"
+"\n"
+"date: 2012-08-23 21:34:30 +0000"
+msgstr "Bulharské překlady pro KOffice"
-#. description(texlive-sepnum:texlive-sepnum-doc)
+#. summary(texlive-specs-x:texlive-translation-natbib-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-sepnum"
+msgid "French translation of the documentation of natbib"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-seqsplit:texlive-seqsplit-doc)
+#. description(texlive-specs-x:texlive-translation-natbib-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-seqsplit"
+msgid ""
+"A French translation of the documentation of natbib.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-serbian-apostrophe:texlive-serbian-apostrophe-doc)
+#. summary(texlive-specs-x:texlive-translation-tabbing-fr)
#, fuzzy
-msgid "This package includes the documentation for texlive-serbian-apostrophe"
+msgid "French translation of the documentation of Tabbing"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-serbian-date-lat:texlive-serbian-date-lat-doc)
+#. description(texlive-specs-x:texlive-translation-tabbing-fr)
+msgid ""
+"A translation to French (by the author) of the documentation of the Tabbing package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-translations)
#, fuzzy
-msgid "This package includes the documentation for texlive-serbian-date-lat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Internationalisation of LaTeX2e packages"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-serbian-def-cyr:texlive-serbian-def-cyr-doc)
+#. description(texlive-specs-x:texlive-translations)
+msgid ""
+"This package (once part of the exsheets package), provides a framework for providing multilingual features to a LaTeX package. The package has its own basic dictionaries for English, French, German and Spanish; it aims to use translation material for English, French, German, Italian, Spanish, Catalan, Turkish, Croatian, Hungarian, Danish and Portuguese from babel or polyglossia if either is in use in the document. (Additional languages from the multilingual packages may be possible: ask the author.)\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-translations-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-serbian-def-cyr"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-translations"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-serbian-lig:texlive-serbian-lig-doc)
+#. description(texlive-specs-x:texlive-translations-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-serbian-lig"
+msgid "This package includes the documentation for texlive-translations"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-setdeck:texlive-setdeck-doc)
-msgid "This package includes the documentation for texlive-setdeck"
+#. summary(texlive-specs-x:texlive-tree-dvips)
+msgid "Trees and other linguists' macros"
msgstr ""
-#. description(texlive-setspace:texlive-setspace-doc)
+#. description(texlive-specs-x:texlive-tree-dvips)
+msgid ""
+"The package defines a mechanism for specifying connected trees that uses a tabular environment to generate node positions. The package uses PostScript code, loaded by dvips, so output can only be generated by use of dvips. The package lingmacros.sty defines a few macros for linguists: \\enumsentence for enumerating sentence examples, simple tabular-based non- connected tree macros, and gloss macros.\n"
+"\n"
+"date: 2012-01-20 10:26:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tree-dvips-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-setspace"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tree-dvips"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-seuthesis:texlive-seuthesis-doc)
+#. description(texlive-specs-x:texlive-tree-dvips-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-seuthesis"
+msgid "This package includes the documentation for texlive-tree-dvips"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sf298:texlive-sf298-doc)
+#. summary(texlive-specs-x:texlive-treetex)
+msgid "Draw trees"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-treetex)
+msgid ""
+"Macros to draw trees, within TeX (or LaTeX). The algorithm used is discussed in an accompanying paper (written using LaTeX 2.09).\n"
+"\n"
+"date: 2012-01-20 10:26:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-treetex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sf298"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-treetex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sffms:texlive-sffms-doc)
+#. description(texlive-specs-x:texlive-treetex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sffms"
+msgid "This package includes the documentation for texlive-treetex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sfg:texlive-sfg-doc)
+#. summary(texlive-specs-x:texlive-trfsigns)
+msgid "Typeset transform signs"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-trfsigns)
+msgid ""
+"A package for typesetting various transformation signs for Laplace transforms, Fourier transforms and others.\n"
+"\n"
+"date: 2012-08-23 21:34:30 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-trfsigns-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sfg"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-trfsigns"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sgame:texlive-sgame-doc)
+#. description(texlive-specs-x:texlive-trfsigns-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sgame"
+msgid "This package includes the documentation for texlive-trfsigns"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-shade:texlive-shade-doc)
+#. summary(texlive-specs-x:texlive-trimspaces)
+msgid "Trim spaces around an argument or within a macro"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-trimspaces)
+msgid ""
+"A very short package that allows you to expandably remove spaces around a token list (commands are provided to remove spaces before, spaces after, or both); or to remove surrounding spaces within a macro definition, or to define space-stripped macros.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-trimspaces-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shade"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-trimspaces"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-shadethm:texlive-shadethm-doc)
+#. description(texlive-specs-x:texlive-trimspaces-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shadethm"
+msgid "This package includes the documentation for texlive-trimspaces"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-shadow:texlive-shadow-doc)
+#. summary(texlive-specs-x:texlive-trivfloat)
+msgid "Quick float definitions in LaTeX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-trivfloat)
+msgid ""
+"The trivfloat package provides a quick method for defining new float types in LaTeX. A single command sets up a new float in the same style as the LaTeX kernel figure and table float types. The package works with memoir as well as the standard classes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-trivfloat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shadow"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-trivfloat"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-shadowtext:texlive-shadowtext-doc)
+#. description(texlive-specs-x:texlive-trivfloat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shadowtext"
+msgid "This package includes the documentation for texlive-trivfloat"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-shapepar:texlive-shapepar-doc)
+#. summary(texlive-specs-x:texlive-trsym)
+msgid "Symbols for transformations"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-trsym)
+msgid ""
+"The bundle provides Metafont source for a small font used for (e.g.) Laplace transformations, together with a LaTeX .fd file and a package providing commands for the symbols' use in mathematics.\n"
+"\n"
+"date: 2012-04-05 19:57:49 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-trsym-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shapepar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-trsym"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-shipunov:texlive-shipunov-doc)
+#. description(texlive-specs-x:texlive-trsym-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shipunov"
+msgid "This package includes the documentation for texlive-trsym"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-shorttoc:texlive-shorttoc-doc)
+#. summary(texlive-specs-x:texlive-truncate)
+msgid "Truncate text to a specified width"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-truncate)
+msgid ""
+"The package will by default break at word boundaries, but package options are offered to permit breaks within words.\n"
+"\n"
+"date: 2012-08-23 21:07:17 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-truncate-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shorttoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-truncate"
+msgstr "Dokumentace pro gawk"
-#. description(texlive-show2e:texlive-show2e-doc)
+#. description(texlive-specs-x:texlive-truncate-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-show2e"
+msgid "This package includes the documentation for texlive-truncate"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-showcharinbox:texlive-showcharinbox-doc)
-msgid "This package includes the documentation for texlive-showcharinbox"
+#. summary(texlive-specs-x:texlive-tsemlines)
+msgid "Support for the ancient \\emline macro"
msgstr ""
-#. description(texlive-showdim:texlive-showdim-doc)
-msgid "This package includes the documentation for texlive-showdim"
+#. description(texlive-specs-x:texlive-tsemlines)
+msgid ""
+"Occasional Documents appear, that use graphics generated by texcad from the emtex distribution. These documents often use the \\emline macro, which produced lines at an arbitrary orientation. The present package emulates the macro, using TikZ.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-showexpl:texlive-showexpl-doc)
+#. summary(texlive-specs-x:texlive-ttfutils)
+msgid "Package ttfutils"
+msgstr "Balíček ttfutils"
+
+#. description(texlive-specs-x:texlive-ttfutils)
#, fuzzy
-msgid "This package includes the documentation for texlive-showexpl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "The ttfutils package"
+msgstr "dosutils CD dir - interní balíček."
-#. description(texlive-showhyphens:texlive-showhyphens-doc)
+#. summary(texlive-specs-x:texlive-ttfutils-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-showhyphens"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ttfutils"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-showlabels:texlive-showlabels-doc)
+#. description(texlive-specs-x:texlive-ttfutils-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-showlabels"
+msgid "This package includes the documentation for texlive-ttfutils"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-showtags:texlive-showtags-doc)
+#. summary(texlive-specs-x:texlive-tucv)
+msgid "Support for typesetting a CV or resumee"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-tucv)
+msgid ""
+"The package provides commands for typesetting a CV or resume. It provides commands for general-purpose headings, entries, and item/description pairs, as well as more specific commands for formatting sections, with explicit inclusion of school, degree, employer, job, conference, and publications entries. It tends to produce a somewhat long and quite detailed document but may also be suitable to support a shorter resume. The package relies on a 'sufficiently recent' copy of the l3kernel and l3packages bundles.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tucv-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-showtags"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tucv"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-shuffle:texlive-shuffle-doc)
+#. description(texlive-specs-x:texlive-tucv-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-shuffle"
+msgid "This package includes the documentation for texlive-tucv"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sidecap:texlive-sidecap-doc)
+#. summary(texlive-specs-x:texlive-tudscr)
+msgid "Typeset documents in the corporate style of TU Dresden"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-tudscr)
+msgid ""
+"The bundle provides classes and packages, whose aim is to typeset LaTeX documents in the Corporate Design of the Technische Universitat Dresden. It bases on the KOMA-Script document classes. The fonts Univers and DIN-Bold are necessary. (The fonts are available on request for staff and students of the Technische Universitat Dresden.) The bundle offers: the three document classes tudscrartcl, tudscrreprt and tudscrbook which serve as drop-in replacements for scrartcl, scrreprt and scrreprt. the package tudscrsupervisor, which provides environments and macros to create tasks, evaluations and notices for scientific theses, the package mathswap for swapping math delimiters within numbers (cf. ionumbers), and the package twocolfix that the position of headings in two column layout.\n"
+"\n"
+"date: 2014-05-06 13:51:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tudscr-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sidecap"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tudscr"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sidenotes:texlive-sidenotes-doc)
+#. description(texlive-specs-x:texlive-tudscr-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sidenotes"
+msgid "This package includes the documentation for texlive-tudscr"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sides:texlive-sides-doc)
+#. summary(texlive-specs-x:texlive-tufte-latex)
+msgid "Document classes inspired by the work of Edward Tufte"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-tufte-latex)
+msgid ""
+"Provided are two classes inspired, respectively, by handouts and books created by Edward Tufte.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tufte-latex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sides"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tufte-latex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-silence:texlive-silence-doc)
+#. description(texlive-specs-x:texlive-tufte-latex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-silence"
+msgid "This package includes the documentation for texlive-tufte-latex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-simplecd:texlive-simplecd-doc)
+#. summary(texlive-specs-x:texlive-tugboat)
+msgid "LaTeX macros for TUGboat articles"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-tugboat)
+msgid ""
+"Provides ltugboat.cls for both regular and proceedings issues of the TUGboat journal. The distribution also includes a BibTeX style appropriate for use with the classes' \"harvard\" option.\n"
+"\n"
+"date: 2013-12-23 21:50:28 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tugboat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-simplecd"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tugboat"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-simplecv:texlive-simplecv-doc)
+#. description(texlive-specs-x:texlive-tugboat-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-simplecv"
+msgid "This package includes the documentation for texlive-tugboat"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-simplewick:texlive-simplewick-doc)
+#. summary(texlive-specs-x:texlive-tugboat-plain)
#, fuzzy
-msgid "This package includes the documentation for texlive-simplewick"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Plain TeX macros for TUGboat"
+msgstr "TeXová makra pro šachové diagramy"
-#. description(texlive-sitem:texlive-sitem-doc)
+#. description(texlive-specs-x:texlive-tugboat-plain)
+msgid ""
+"The macros defined in this directory (in files tugboat.sty and tugboat.cmn) are used in papers written in Plain TeX for publication in TUGboat.\n"
+"\n"
+"date: 2013-11-21 20:33:57 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tugboat-plain-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sitem"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tugboat-plain"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-siunitx:texlive-siunitx-doc)
+#. description(texlive-specs-x:texlive-tugboat-plain-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-siunitx"
+msgid "This package includes the documentation for texlive-tugboat-plain"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-skak:texlive-skak-doc)
+#. summary(texlive-specs-x:texlive-tui)
+msgid "Thesis style for the University of the Andes, Colombia"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-tui)
+msgid ""
+"Doctoral Dissertations from the Faculty of Engineering at the Universidad de los Andes, Bogota, Colombia. The class is implemented as an extension of the memoir class. Clase de Tesis doctorales para ingenieria, Universidad de los Andes, Bogota.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-tui-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-skak"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-tui"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-skaknew:texlive-skaknew-doc)
+#. description(texlive-specs-x:texlive-tui-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-skaknew"
+msgid "This package includes the documentation for texlive-tui"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-skb:texlive-skb-doc)
+#. summary(texlive-specs-x:texlive-turkmen)
#, fuzzy
-msgid "This package includes the documentation for texlive-skb"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Babel support for Turkmen"
+msgstr "VPN podpora pro Turnpike."
-#. description(texlive-skdoc:texlive-skdoc-doc)
-msgid "This package includes the documentation for texlive-skdoc"
+#. description(texlive-specs-x:texlive-turkmen)
+msgid ""
+"The package provides support for Turkmen in babel, but integration with babel is not available.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-skeycommand:texlive-skeycommand-doc)
+#. summary(texlive-specs-x:texlive-turkmen-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-skeycommand"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-turkmen"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-skeyval:texlive-skeyval-doc)
+#. description(texlive-specs-x:texlive-turkmen-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-skeyval"
+msgid "This package includes the documentation for texlive-turkmen"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-skmath:texlive-skmath-doc)
-msgid "This package includes the documentation for texlive-skmath"
+#. summary(texlive-specs-x:texlive-turnstile)
+msgid "Typeset the (logic) turnstile notation"
msgstr ""
-#. description(texlive-skrapport:texlive-skrapport-doc)
-msgid "This package includes the documentation for texlive-skrapport"
+#. description(texlive-specs-x:texlive-turnstile)
+msgid ""
+"Among other uses, the turnstile sign is used by logicians for denoting a consequence relation, related to a given logic, between a collection of formulas and a derived formula.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-slantsc:texlive-slantsc-doc)
+#. summary(texlive-specs-x:texlive-turnstile-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-slantsc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-turnstile"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-slideshow:texlive-slideshow-doc)
+#. description(texlive-specs-x:texlive-turnstile-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-slideshow"
+msgid "This package includes the documentation for texlive-turnstile"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-smalltableof:texlive-smalltableof-doc)
+#. summary(texlive-specs-x:texlive-turnthepage)
#, fuzzy
-msgid "This package includes the documentation for texlive-smalltableof"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Provide \"turn page\" instructions"
+msgstr "Dokumentace pro castor"
-#. description(texlive-smartdiagram:texlive-smartdiagram-doc)
-msgid "This package includes the documentation for texlive-smartdiagram"
+#. description(texlive-specs-x:texlive-turnthepage)
+msgid ""
+"The package prints a 'turn' instruction at the bottom of odd- numbered pages (except the last). This is a common convention for examination papers and the like.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-smartref:texlive-smartref-doc)
+#. summary(texlive-specs-x:texlive-turnthepage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-smartref"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-turnthepage"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-snapshot:texlive-snapshot-doc)
+#. description(texlive-specs-x:texlive-turnthepage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-snapshot"
+msgid "This package includes the documentation for texlive-turnthepage"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-snotez:texlive-snotez-doc)
-msgid "This package includes the documentation for texlive-snotez"
+#. summary(texlive-specs-x:texlive-twoinone)
+msgid "Print two pages on a single page"
msgstr ""
-#. description(texlive-songbook:texlive-songbook-doc)
+#. description(texlive-specs-x:texlive-twoinone)
+msgid ""
+"The package is for printing two pages on a single (landscape) A4 page. Page numbers appear on the included pages, and not on the landscape 'container' page.\n"
+"\n"
+"date: 2012-08-19 15:38:37 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-twoinone-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-songbook"
+msgid "Documentation for texlive-twoinone"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-x:texlive-twoinone-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-twoinone"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-songs:texlive-songs-doc)
-msgid "This package includes the documentation for texlive-songs"
+#. summary(texlive-specs-x:texlive-twoup)
+msgid "Print two virtual pages on each physical page"
msgstr ""
-#. description(texlive-sort-by-letters:texlive-sort-by-letters-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-sort-by-letters"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-x:texlive-twoup)
+msgid ""
+"MiKTeX and many other TeX implementations include tools for massaging PostScript into booklet and two-up printing -- that is, printing two logical pages side by side on one side of one sheet of paper. However, some LaTeX preliminaries are necessary to use those tools. The twoup package provides such preliminaries and gives advice on how to use the PostScript tools.\n"
+"\n"
+"date: 2012-08-19 15:50:37 +0000"
+msgstr ""
-#. description(texlive-soton:texlive-soton-doc)
+#. summary(texlive-specs-x:texlive-twoup-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-soton"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-twoup"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-soul:texlive-soul-doc)
+#. description(texlive-specs-x:texlive-twoup-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-soul"
+msgid "This package includes the documentation for texlive-twoup"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sourcecodepro:texlive-sourcecodepro-doc)
-msgid "This package includes the documentation for texlive-sourcecodepro"
+#. summary(texlive-specs-x:texlive-txfonts)
+msgid "Times-like fonts in support of mathematics"
msgstr ""
-#. description(texlive-sourcesanspro:texlive-sourcesanspro-doc)
-msgid "This package includes the documentation for texlive-sourcesanspro"
+#. description(texlive-specs-x:texlive-txfonts)
+msgid ""
+"Txfonts supplies virtual text roman fonts using Adobe Times (or URW NimbusRomNo9L) with some modified and additional text symbols in the OT1, T1, and TS1 encodings; maths alphabets using Times/URW Nimbus; maths fonts providing all the symbols of the Computer Modern and AMS fonts, including all the Greek capital letters from CMR; and additional maths fonts of various other symbols. The set is complemented by a sans-serif set of text fonts, based on Helvetica/NimbusSanL, and a monospace set. All the fonts are in Type 1 format (AFM and PFB files), and are supported by TeX metrics (VF and TFM files) and macros for use with LaTeX.\n"
+"\n"
+"date: 2012-08-19 15:50:37 +0000"
msgstr ""
-#. description(texlive-spanglish:texlive-spanglish-doc)
+#. summary(texlive-specs-x:texlive-txfonts-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-spanglish"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-txfonts"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-spanish-mx:texlive-spanish-mx-doc)
+#. description(texlive-specs-x:texlive-txfonts-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-spanish-mx"
+msgid "This package includes the documentation for texlive-txfonts"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-sparklines:texlive-sparklines-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-sparklines"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-x:texlive-txfonts-fonts)
+msgid "Severed fonts for texlive-txfonts"
+msgstr ""
-#. description(texlive-spath3:texlive-spath3-doc)
-msgid "This package includes the documentation for texlive-spath3"
+#. description(texlive-specs-x:texlive-txfonts-fonts)
+msgid "The separated fonts package for texlive-txfonts"
msgstr ""
-#. description(texlive-spelling:texlive-spelling-doc)
-msgid "This package includes the documentation for texlive-spelling"
+#. summary(texlive-specs-x:texlive-txfontsb)
+msgid "Extensions to txfonts, using GNU Freefont"
msgstr ""
-#. description(texlive-spie:texlive-spie-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-spie"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-x:texlive-txfontsb)
+msgid ""
+"A set of fonts that extend the txfonts bundle with small caps and old style numbers, together with Greek support. The extensions are made with modifications of the GNU Freefont.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-splines:texlive-splines-doc)
+#. summary(texlive-specs-x:texlive-txfontsb-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-splines"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-txfontsb"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-splitbib:texlive-splitbib-doc)
+#. description(texlive-specs-x:texlive-txfontsb-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-splitbib"
+msgid "This package includes the documentation for texlive-txfontsb"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-splitindex:texlive-splitindex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-splitindex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-x:texlive-txfontsb-fonts)
+msgid "Severed fonts for texlive-txfontsb"
+msgstr ""
-#. description(texlive-spot:texlive-spot-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-spot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-x:texlive-txfontsb-fonts)
+msgid "The separated fonts package for texlive-txfontsb"
+msgstr ""
-#. description(texlive-spotcolor:texlive-spotcolor-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-spotcolor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-x:texlive-txgreeks)
+msgid "Shape selection for TX fonts Greek letters"
+msgstr ""
-#. description(texlive-spreadtab:texlive-spreadtab-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-spreadtab"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-x:texlive-txgreeks)
+msgid ""
+"The package allows LaTeX users who use the TX fonts to select the shapes (italic or upright) for the Greek lowercase and uppercase letters. Once the shapes for lowercase and uppercase have been selected via a package option, the \\other prefix (e.g., \\otheralpha) allows using the alternate glyph (as in the fourier package). The txgreeks package does not constrain the text font that may be used in the document.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-spverbatim:texlive-spverbatim-doc)
+#. summary(texlive-specs-x:texlive-txgreeks-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-spverbatim"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-txgreeks"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-srbook-mem:texlive-srbook-mem-doc)
+#. description(texlive-specs-x:texlive-txgreeks-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-srbook-mem"
+msgid "This package includes the documentation for texlive-txgreeks"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-srcltx:texlive-srcltx-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-srcltx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-x:texlive-type1cm)
+msgid "Arbitrary size font selection in LaTeX"
+msgstr ""
-#. description(texlive-sseq:texlive-sseq-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-sseq"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-x:texlive-type1cm)
+msgid ""
+"LaTeX, by default, restricts the sizes at which you can use its default computer modern fonts, to a fixed set of discrete sizes (effectively, a set specified by Knuth). The type1cm package removes this restriction; this is particularly useful when using scalable versions of the cm fonts (Bakoma, or the versions from BSR/Y&Y, or True Type versions from Kinch, PCTeX, etc.). In fact, since modern distributions will automatically generate any bitmap font you might need, type1cm has wider application than just those using scaleable versions of the fonts. Note that the LaTeX distribution now contains a package fix-cm, which performs the task of type1cm, as well as doing the same job for T1- and TS1-encoded ec fonts.\n"
+"\n"
+"date: 2012-05-16 11:32:16 +0000"
+msgstr ""
-#. description(texlive-stage:texlive-stage-doc)
+#. summary(texlive-specs-x:texlive-type1cm-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stage"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-type1cm"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-standalone:texlive-standalone-doc)
+#. description(texlive-specs-x:texlive-type1cm-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-standalone"
+msgid "This package includes the documentation for texlive-type1cm"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-starfont:texlive-starfont-doc)
+#. summary(texlive-specs-x:texlive-typeface)
+msgid "Select a balanced set of fonts"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-typeface)
+msgid ""
+"The package provides the means of establishing a consistent set of fonts for use in a LaTeX document. It allows mixing and matching the Type 1 font sets available on the archive (and it may be extended, via its configuration file, to support other fonts). Font-set definition takes the form of a set of options that are read when the package is loaded: for each typographic category (main body font, sans-serif font, monospace font, mathematics fonts, text figures, and so on), a font or a transformation is given in those options. The approach enables the user to remember their own configurations (as a single command) and to borrow configurations that other users have developed. The present release is designated \"for review\".\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-typeface-doc)
+msgid "Documentation for texlive-typeface"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-typeface-doc)
+msgid "This package includes the documentation for texlive-typeface"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-typehtml)
#, fuzzy
-msgid "This package includes the documentation for texlive-starfont"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset HTML directly from LaTeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-startex:texlive-startex-doc)
+#. description(texlive-specs-x:texlive-typehtml)
+msgid ""
+"Can handle almost all of HTML2, and most of the math fragment of the draft HTML3.\n"
+"\n"
+"date: 2011-10-03 10:30:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-typehtml-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-startex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-typehtml"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-statex:texlive-statex-doc)
+#. description(texlive-specs-x:texlive-typehtml-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-statex"
+msgid "This package includes the documentation for texlive-typehtml"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-statex2:texlive-statex2-doc)
+#. summary(texlive-specs-x:texlive-typeoutfileinfo)
+msgid "Display class/package/file information"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-typeoutfileinfo)
+msgid ""
+"The package provides a minimalist shell script, for Unix systems, that displays the information content in a \\ProvidesFile, \\ProvidesPackage or \\ProvidesClass command in a LaTeX source file. The package requires that the readprov package is available.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-typeoutfileinfo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-statex2"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-typeoutfileinfo"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-statistik:texlive-statistik-doc)
+#. description(texlive-specs-x:texlive-typeoutfileinfo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-statistik"
+msgid "This package includes the documentation for texlive-typeoutfileinfo"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-staves:texlive-staves-doc)
+#. summary(texlive-specs-x:texlive-typogrid)
+msgid "Print a typographic grid"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-typogrid)
+msgid ""
+"Draws a grid on every page of the document; the grid divides the page into columns, and may be used for fixing measurements of layout.\n"
+"\n"
+"date: 2012-04-27 15:21:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-typogrid-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-staves"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-typogrid"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-stdclsdv:texlive-stdclsdv-doc)
+#. description(texlive-specs-x:texlive-typogrid-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stdclsdv"
+msgid "This package includes the documentation for texlive-typogrid"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-stdpage:texlive-stdpage-doc)
+#. summary(texlive-specs-x:texlive-uaclasses)
+msgid "University of Arizona thesis and dissertation format"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uaclasses)
+msgid ""
+"This package provides a LaTeX2e document class named 'ua- thesis' for typesetting theses and dissertations in the official format required by the University of Arizona. Moreover, there is a fully compatible alternative document class 'my-thesis' for private 'nice' copies of the dissertation, and the respective title pages are available as separate packages to work with any document class.\n"
+"\n"
+"date: 2011-11-23 22:58:18 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uaclasses-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stdpage"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uaclasses"
+msgstr "HTML dokumentace pro GNU C Library"
-#. description(texlive-steinmetz:texlive-steinmetz-doc)
+#. description(texlive-specs-x:texlive-uaclasses-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-steinmetz"
+msgid "This package includes the documentation for texlive-uaclasses"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-stellenbosch:texlive-stellenbosch-doc)
+#. summary(texlive-specs-x:texlive-uadocs)
+msgid "Course texts and masters theses in University of Antwerp style"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uadocs)
+msgid ""
+"These class files implement the house style of the University of Antwerp for course texts and master theses. Using these class files will make it easy for you to make and keep your documents compliant to this version and future versions of the house style of the University of Antwerp.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uadocs-doc)
+msgid "Documentation for texlive-uadocs"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uadocs-doc)
+msgid "This package includes the documentation for texlive-uadocs"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uafthesis)
+msgid "Document class for theses at University of Alaska Fairbanks"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uafthesis)
+msgid ""
+"This is an \"unofficial\" official class.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uafthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stellenbosch"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uafthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-stex:texlive-stex-doc)
+#. description(texlive-specs-x:texlive-uafthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stex"
+msgid "This package includes the documentation for texlive-uafthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-stix:texlive-stix-doc)
+#. summary(texlive-specs-x:texlive-ucbthesis)
+msgid "Thesis and dissertation class supporting UCB requirements"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ucbthesis)
+msgid ""
+"The class provides the necessary framework for electronic submission of Masters theses and Ph.D. dissertations at the University of California, Berkeley. It is based on the memoir class.\n"
+"\n"
+"date: 2014-04-25 09:20:11 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ucbthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stix"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ucbthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-stmaryrd:texlive-stmaryrd-doc)
+#. description(texlive-specs-x:texlive-ucbthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stmaryrd"
+msgid "This package includes the documentation for texlive-ucbthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-storebox:texlive-storebox-doc)
+#. summary(texlive-specs-x:texlive-ucdavisthesis)
+msgid "A thesis/dissertation class for University of California at Davis"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ucdavisthesis)
+msgid ""
+"The class conforms to the University's requirements for 2009.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ucdavisthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-storebox"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-ucdavisthesis"
+msgstr "Dokumentace pro castor"
-#. description(texlive-storecmd:texlive-storecmd-doc)
+#. description(texlive-specs-x:texlive-ucdavisthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-storecmd"
+msgid "This package includes the documentation for texlive-ucdavisthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-stringstrings:texlive-stringstrings-doc)
+#. summary(texlive-specs-x:texlive-ucharclasses)
+msgid "Font actions in XeTeX according to what is being processed"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ucharclasses)
+msgid ""
+"The package takes care of switching fonts when you switch from one Unicode block to another in the text of a document. This way, you can write a document with no explicit font selection, but a series of rules of the form \"when entering block ..., switch font to use ...\".\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ucharclasses-doc)
+msgid "Documentation for texlive-ucharclasses"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ucharclasses-doc)
+msgid "This package includes the documentation for texlive-ucharclasses"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ucs)
#, fuzzy
-msgid "This package includes the documentation for texlive-stringstrings"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Extended UTF-8 input encoding support for LaTeX"
+msgstr "Podpora Unicode pro LaTeX"
-#. description(texlive-struktex:texlive-struktex-doc)
+#. description(texlive-specs-x:texlive-ucs)
+msgid ""
+"The bundle provides the ucs package, and utf8x.def, together with a large number of support files. The utf8x.def definition file for use with inputenc covers a wider range of Unicode characters than does utf8.def in the LaTeX distribution. The package provides facilities for efficient use of its large sets of Unicode characters. Glyph production may be controlled by various options, which permits use of non-ASCII characters when coding mathematical formulae. Note that the bundle previously had an alias \"unicode\"; that alias has now been withdrawn, and no package of that name now exists.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ucs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-struktex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ucs"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sttools:texlive-sttools-doc)
+#. description(texlive-specs-x:texlive-ucs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sttools"
+msgid "This package includes the documentation for texlive-ucs"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-stubs:texlive-stubs-doc)
+#. summary(texlive-specs-x:texlive-ucthesis)
+msgid "University of California thesis format"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ucthesis)
+msgid ""
+"A modified version of the standard LaTeX report style that is accepted for use with University of California PhD dissertations and Masters theses. A sample dissertation source and bibliography are provided.\n"
+"\n"
+"date: 2012-02-09 16:36:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ucthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-stubs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ucthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sty2dtx:texlive-sty2dtx-doc)
+#. description(texlive-specs-x:texlive-ucthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sty2dtx"
+msgid "This package includes the documentation for texlive-ucthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-suanpan:texlive-suanpan-doc)
+#. summary(texlive-specs-x:texlive-udesoftec)
+msgid "Thesis class for the University of Duisburg-Essen"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-udesoftec)
+msgid ""
+"The class is designed for typesetting theses in the Research Group for Business Informatics and Software Engineering. (The class may also serve as a template for such theses.) The class is designed for use with pdfLaTeX; input in UTF-8 encoding is assumed.\n"
+"\n"
+"date: 2014-05-15 17:43:30 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-udesoftec-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-suanpan"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-udesoftec"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-subdepth:texlive-subdepth-doc)
+#. description(texlive-specs-x:texlive-udesoftec-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-subdepth"
+msgid "This package includes the documentation for texlive-udesoftec"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-subeqn:texlive-subeqn-doc)
+#. summary(texlive-specs-x:texlive-uebungsblatt)
+msgid "A LaTeX class for writing exercise sheets"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uebungsblatt)
+msgid ""
+"This package implements a LaTeX class for writing exercise sheets for a lecture. Features: - quick typesetting of exercise sheets or their revisions, - simple user friendly commands, - elegant page formatting, - automatic numbering of exercises and sub-exercises, - the number of the exercise sheet is extracted automatically from the file name, - static information about the lectures and the authors needs to provided at one point only.\n"
+"\n"
+"date: 2012-01-14 16:47:45 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uebungsblatt-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-subeqn"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uebungsblatt"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-subeqnarray:texlive-subeqnarray-doc)
+#. description(texlive-specs-x:texlive-uebungsblatt-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-subeqnarray"
+msgid "This package includes the documentation for texlive-uebungsblatt"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-subfig:texlive-subfig-doc)
+#. summary(texlive-specs-x:texlive-uestcthesis)
+msgid "Thesis class for UESTC"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uestcthesis)
+msgid ""
+"The class is for typesetting a thesis at the University of Electronic Science and Technology of China.\n"
+"\n"
+"date: 2014-03-16 09:59:31 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uestcthesis-doc)
+msgid "Documentation for texlive-uestcthesis"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uestcthesis-doc)
+msgid "This package includes the documentation for texlive-uestcthesis"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uhc)
#, fuzzy
-msgid "This package includes the documentation for texlive-subfig"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Fonts for the Khmer language of Cambodia"
+msgid "Fonts for the Korean language"
+msgstr "Písma pro Khmérštinu"
-#. description(texlive-subfigmat:texlive-subfigmat-doc)
+#. description(texlive-specs-x:texlive-uhc)
+msgid ""
+"Support for Korean documents written in Korean standard KSC codes for LaTeX2e.\n"
+"\n"
+"date: 2012-05-16 11:32:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uhc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-subfigmat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uhc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-subfigure:texlive-subfigure-doc)
+#. description(texlive-specs-x:texlive-uhc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-subfigure"
+msgid "This package includes the documentation for texlive-uhc"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-subfiles:texlive-subfiles-doc)
-msgid "This package includes the documentation for texlive-subfiles"
+#. summary(texlive-specs-x:texlive-uhc-fonts)
+msgid "Severed fonts for texlive-uhc"
msgstr ""
-#. description(texlive-subfloat:texlive-subfloat-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-subfloat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-x:texlive-uhc-fonts)
+msgid "The separated fonts package for texlive-uhc"
+msgstr ""
-#. description(texlive-substances:texlive-substances-doc)
-msgid "This package includes the documentation for texlive-substances"
+#. summary(texlive-specs-x:texlive-uiucredborder)
+msgid "Class for UIUC thesis red-bordered forms"
msgstr ""
-#. description(texlive-substitutefont:texlive-substitutefont-doc)
+#. description(texlive-specs-x:texlive-uiucredborder)
+msgid ""
+"The class offers a means of filling out the \"red-bordered form\" that gets signed by the department head, your advisor, and -- for doctoral dissertations -- your thesis committee members.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uiucredborder-doc)
+msgid "Documentation for texlive-uiucredborder"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uiucredborder-doc)
+msgid "This package includes the documentation for texlive-uiucredborder"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uiucthesis)
+msgid "UIUC thesis class"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uiucthesis)
+msgid ""
+"The class produces a document that conforms to the format described in the University's Handbook for Graduate Students Preparing to Deposit.\n"
+"\n"
+"date: 2013-04-14 12:49:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uiucthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-substitutefont"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uiucthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-substr:texlive-substr-doc)
+#. description(texlive-specs-x:texlive-uiucthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-substr"
+msgid "This package includes the documentation for texlive-uiucthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-subsupscripts:texlive-subsupscripts-doc)
+#. summary(texlive-specs-x:texlive-ukrhyph)
#, fuzzy
-msgid "This package includes the documentation for texlive-subsupscripts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "YaST2 - Translations for Ukrainian."
+msgid "Hyphenation Patterns for Ukrainian"
+msgstr "YaST2 - překlad do ukrajinštiny."
-#. description(texlive-sudoku:texlive-sudoku-doc)
+#. description(texlive-specs-x:texlive-ukrhyph)
+msgid ""
+"A range of patterns, depending on the encoding of the output font (including the standard T2A, so one can use the patterns with free fonts).\n"
+"\n"
+"date: 2012-06-26 14:04:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ukrhyph-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sudoku"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ukrhyph"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sudokubundle:texlive-sudokubundle-doc)
+#. description(texlive-specs-x:texlive-ukrhyph-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sudokubundle"
+msgid "This package includes the documentation for texlive-ukrhyph"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-suftesi:texlive-suftesi-doc)
+#. summary(texlive-specs-x:texlive-ulem)
+msgid "Package for underlining"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ulem)
+msgid ""
+"The package provides an \\ul (underline) command which will break over line ends; this technique may be used to replace \\em (both in that form and as the \\emph command), so as to make output look as if it comes from a typewriter. The package also offers double and wavy underlining, and striking out (line through words) and crossing out (/// over words). The package works with both Plain TeX and LaTeX.\n"
+"\n"
+"date: 2012-06-01 09:43:10 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ulem-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-suftesi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ulem"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-sugconf:texlive-sugconf-doc)
+#. description(texlive-specs-x:texlive-ulem-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-sugconf"
+msgid "This package includes the documentation for texlive-ulem"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-superiors:texlive-superiors-doc)
-msgid "This package includes the documentation for texlive-superiors"
+#. summary(texlive-specs-x:texlive-ulqda)
+msgid "Support of Qualitative Data Analysis"
msgstr ""
-#. description(texlive-supertabular:texlive-supertabular-doc)
+#. description(texlive-specs-x:texlive-ulqda)
+msgid ""
+"The package is for use in Qualitative Data Analysis research. It supports the integration of Qualitative Data Analysis (QDA) research tasks, specifically for Grounded Theory, into the LaTeX work flow. It assists in the analysis of textual data such as interview transcripts and field notes by providing the LaTeX user with macros which are used to markup textual information -- for example, in-depth interviews.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ulqda-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-supertabular"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ulqda"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-susy:texlive-susy-doc)
+#. description(texlive-specs-x:texlive-ulqda-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-susy"
+msgid "This package includes the documentation for texlive-ulqda"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-svg:texlive-svg-doc)
-msgid "This package includes the documentation for texlive-svg"
+#. summary(texlive-specs-x:texlive-ulthese)
+msgid "Thesis class and templates for Universite Laval"
msgstr ""
-#. description(texlive-svgcolor:texlive-svgcolor-doc)
+#. description(texlive-specs-x:texlive-ulthese)
+msgid ""
+"The package provides a class based on memoir to prepare theses and memoirs compliant with the presentation rules set forth by the Faculty of Graduate Studies of Universite Laval, Quebec, Canada. The class also comes with an extensive set of templates for the various types of theses and memoirs offered at Laval. Please note that the documentation for the class and the comments in the templates are all written in French, the language of the target audience.\n"
+"\n"
+"date: 2014-03-25 21:16:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ulthese-doc)
+msgid "Documentation for texlive-ulthese"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ulthese-doc)
+msgid "This package includes the documentation for texlive-ulthese"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-umich-thesis)
+msgid "University of Michigan Thesis LaTeX class"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-umich-thesis)
+msgid ""
+"A LaTeX2e class to create a University of Michigan dissertation according to the Rackham dissertation handbook.\n"
+"\n"
+"date: 2012-02-09 16:36:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-umich-thesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-svgcolor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-umich-thesis"
+msgstr "Dokumentace pro castor"
-#. description(texlive-svn:texlive-svn-doc)
+#. description(texlive-specs-x:texlive-umich-thesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-svn"
+msgid "This package includes the documentation for texlive-umich-thesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-svn-multi:texlive-svn-multi-doc)
+#. summary(texlive-specs-x:texlive-uml)
+msgid "UML diagrams in LaTeX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uml)
+msgid ""
+"A PSTricks related package for writing UML (Unified Modelling Language) diagrams in LaTeX. Currently, it implements a subset of class diagrams, and some extra constructs as well. The package cannot be used together with pst-uml.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uml-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-svn-multi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uml"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-svn-prov:texlive-svn-prov-doc)
+#. description(texlive-specs-x:texlive-uml-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-svn-prov"
+msgid "This package includes the documentation for texlive-uml"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-svninfo:texlive-svninfo-doc)
+#. summary(texlive-specs-x:texlive-umlaute)
+msgid "German input encodings in LaTeX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-umlaute)
+msgid ""
+"An early package for using alternate input encodings. The author considers the package mostly obsolete, since most of its functions are taken by the inputenc package; however, inputenc doesn't support the roman8 and atari encodings, so umlaute remains the sole source of that support.\n"
+"\n"
+"date: 2012-06-26 14:04:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-umlaute-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-svninfo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-umlaute"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-swebib:texlive-swebib-doc)
+#. description(texlive-specs-x:texlive-umlaute-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-swebib"
+msgid "This package includes the documentation for texlive-umlaute"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-swimgraf:texlive-swimgraf-doc)
+#. summary(texlive-specs-x:texlive-umoline)
+msgid "Underline text allowing line breaking"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-umoline)
+msgid ""
+"Provides commands \\Underline, \\Midline and \\Overline for underlining, striking out, and overlining their text arguments.\n"
+"\n"
+"date: 2011-10-30 12:37:56 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-umoline-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-swimgraf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-umoline"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-syllogism:texlive-syllogism-doc)
+#. description(texlive-specs-x:texlive-umoline-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-syllogism"
+msgid "This package includes the documentation for texlive-umoline"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-synproof:texlive-synproof-doc)
+#. summary(texlive-specs-x:texlive-umthesis)
+msgid "Dissertations at the University of Michigan"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-umthesis)
+msgid ""
+"The class loads book class, and makes minimal changes to it; its coding aims to be as robust as possible, and as a result it has few conflicts with potential add-on packages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-umthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-synproof"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-umthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-syntax:texlive-syntax-doc)
+#. description(texlive-specs-x:texlive-umthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-syntax"
+msgid "This package includes the documentation for texlive-umthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-syntrace:texlive-syntrace-doc)
+#. summary(texlive-specs-x:texlive-umtypewriter)
+msgid "Fonts to typeset with the xgreek package"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-umtypewriter)
+msgid ""
+"The UMTypewriter font family is a monospaced font family that was built from glyphs from the CB Greek fonts, the CyrTUG Cyrillic alphabet fonts (\"LH\"), and the standard Computer Modern font family. It contains four OpenType fonts which are required for use of the xgreek package for XeLaTeX.\n"
+"\n"
+"date: 2012-07-05 13:28:28 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-umtypewriter-fonts)
+msgid "Severed fonts for texlive-umtypewriter"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-umtypewriter-fonts)
+msgid "The separated fonts package for texlive-umtypewriter"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unamth-template)
+msgid "UNAM Thesis LaTeX Template"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-unamth-template)
+msgid ""
+"The bundle provides a template for UNAM's College of Engineering Theses. The work is based on Harish Bhanderi's PhD/MPhil template, and the University of Cambridge Engineering Department template.\n"
+"\n"
+"date: 2014-04-22 17:24:17 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unamthesis)
+msgid "Style for Universidad Nacional Autonoma de Mexico theses"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-unamthesis)
+msgid ""
+"The package provides a customisable format to typeset Theses according to the Universidad Nacional Autonoma de Mexico guidelines. Support for use in Scientific Workplace (SWP) 3.x is also provided. The bundle also includes an appropriate bibliographic style which enables the use of author-year schemes using the natbib package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unamthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-syntrace"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-unamthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-synttree:texlive-synttree-doc)
+#. description(texlive-specs-x:texlive-unamthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-synttree"
+msgid "This package includes the documentation for texlive-unamthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-systeme:texlive-systeme-doc)
+#. summary(texlive-specs-x:texlive-underlin)
+msgid "Underlined running heads"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-underlin)
+msgid ""
+"Defines two pagestyles that provide underlined page heads in LaTeX.\n"
+"\n"
+"date: 2012-06-26 16:23:46 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-underlin-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-systeme"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-underlin"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-t-angles:texlive-t-angles-doc)
+#. description(texlive-specs-x:texlive-underlin-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-t-angles"
+msgid "This package includes the documentation for texlive-underlin"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-t2:texlive-t2-doc)
+#. summary(texlive-specs-x:texlive-underoverlap)
+msgid "Position decorations over and under expressions"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-underoverlap)
+msgid ""
+"The package overcomes TeX's inherent limitations in commands that place decorations (such as braces) at arbirary positions over and under expressions, overlapping as necessary.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-underoverlap-doc)
+msgid "Documentation for texlive-underoverlap"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-underoverlap-doc)
+msgid "This package includes the documentation for texlive-underoverlap"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-underscore)
+msgid "Control the behaviour of \"_\" in text"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-underscore)
+msgid ""
+"With the package, \\_ in text mode (i.e., \\textunderscore) prints an underscore so that hyphenation of words either side of it is not affected; a package option controls whether an actual hyphenation point appears after the underscore, or merely a break point. The package also arranges that, while in text, '_' itself behaves as \\textunderscore (the behaviour of _ in maths mode is not affected).\n"
+"\n"
+"date: 2013-09-20 09:57:07 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-underscore-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-t2"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-underscore"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tabfigures:texlive-tabfigures-doc)
+#. description(texlive-specs-x:texlive-underscore-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabfigures"
+msgid "This package includes the documentation for texlive-underscore"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tableaux:texlive-tableaux-doc)
+#. summary(texlive-specs-x:texlive-undolabl)
+msgid "Override existing labels"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-undolabl)
+msgid ""
+"The package allows the user to override existing labels (for example, those generated automatically).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-undolabl-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tableaux"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-undolabl"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tablefootnote:texlive-tablefootnote-doc)
+#. description(texlive-specs-x:texlive-undolabl-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tablefootnote"
+msgid "This package includes the documentation for texlive-undolabl"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tableof:texlive-tableof-doc)
-msgid "This package includes the documentation for texlive-tableof"
+#. summary(texlive-specs-x:texlive-uni-wtal-ger)
+msgid "Citation style for literary studies at the University of Wuppertal"
msgstr ""
-#. description(texlive-tablists:texlive-tablists-doc)
+#. description(texlive-specs-x:texlive-uni-wtal-ger)
+msgid ""
+"The package defines a biblatex citation style based on the author-title style of biblatex-dw. The citations are optimised for literary studies in faculty of humanities at the Bergische Universitat Wuppertal.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uni-wtal-ger-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tablists"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uni-wtal-ger"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tablor:texlive-tablor-doc)
+#. description(texlive-specs-x:texlive-uni-wtal-ger-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tablor"
+msgid "This package includes the documentation for texlive-uni-wtal-ger"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tabls:texlive-tabls-doc)
+#. summary(texlive-specs-x:texlive-uni-wtal-lin)
+msgid "Citation style for linguistic studies at the University of Wuppertal"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uni-wtal-lin)
+msgid ""
+"The package defines a biblatex citation style based on the standard author-year style. The citations are optimised for linguistic studies at the Institute of Linguistics at the Bergische Universitat Wuppertal.\n"
+"\n"
+"date: 2013-08-10 15:37:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uni-wtal-lin-doc)
+msgid "Documentation for texlive-uni-wtal-lin"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uni-wtal-lin-doc)
+msgid "This package includes the documentation for texlive-uni-wtal-lin"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unicode-math)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabls"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Unicode mathematics support for XeTeX and LuaTeX"
+msgstr "Podpora Unicode pro LaTeX"
-#. description(texlive-tabriz-thesis:texlive-tabriz-thesis-doc)
-msgid "This package includes the documentation for texlive-tabriz-thesis"
+#. description(texlive-specs-x:texlive-unicode-math)
+msgid ""
+"The current release of this package typesets mathematics with unicode input and using OpenType maths fonts. (There is little compatibility with older maths packages.) XeTeX support is well tested, though LuaTeX support less so. The package can typeset using STIX fonts, the XITS development of those fonts, the Asana-Math fonts, the Latin Modern Math, and the TeX Gyre Math font familiess, as well as the commercial Cambria Math fonts. There is no support for extra alphabets in the Unicode 'private use area'. The package relies on recent versions of the fontspec package and the l3kernel and l3packages bundles.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tabto-ltx:texlive-tabto-ltx-doc)
+#. summary(texlive-specs-x:texlive-unicode-math-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabto-ltx"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-unicode-math"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tabu:texlive-tabu-doc)
+#. description(texlive-specs-x:texlive-unicode-math-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabu"
+msgid "This package includes the documentation for texlive-unicode-math"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tabularborder:texlive-tabularborder-doc)
+#. summary(texlive-specs-x:texlive-unisugar)
+msgid "Define syntactic sugar for Unicode LaTeX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-unisugar)
+msgid ""
+"The package allows the user to define shorthand aliases for single Unicode characters, and also provides support for such aliases in RTL-text. The package requires an TeX-alike system that uses Unicode input in a native way: current examples are XeTeX and LuaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unisugar-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabularborder"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-unisugar"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tabularcalc:texlive-tabularcalc-doc)
+#. description(texlive-specs-x:texlive-unisugar-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabularcalc"
+msgid "This package includes the documentation for texlive-unisugar"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tabularew:texlive-tabularew-doc)
+#. summary(texlive-specs-x:texlive-units)
+msgid "Typeset units"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-units)
+msgid ""
+"The package is provided as a bundle with the nicefrac package for typing fractions. Units uses nicefrac in typesetting physical units in a standard-looking sort of way.\n"
+"\n"
+"date: 2012-04-20 13:37:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-units-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabularew"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-units"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tabulary:texlive-tabulary-doc)
+#. description(texlive-specs-x:texlive-units-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabulary"
+msgid "This package includes the documentation for texlive-units"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tabvar:texlive-tabvar-doc)
+#. summary(texlive-specs-x:texlive-unitsdef)
#, fuzzy
-msgid "This package includes the documentation for texlive-tabvar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Typesetting XML with TeX"
+msgid "Typesetting units in LaTeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-tagging:texlive-tagging-doc)
+#. description(texlive-specs-x:texlive-unitsdef)
+msgid ""
+"Many packages for typesetting units have been written for use in LaTeX2e. Some define macros to typeset a lot of units but do not suit to the actual font settings, some make the characters needed available but do not predefine any unit. This package tries to comply with both requirements. It predefines common units, defines an easy to use interface to define new units and changes the output concerning to the surrounding font settings.\n"
+"\n"
+"date: 2012-04-20 13:37:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unitsdef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tagging"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-unitsdef"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-talk:texlive-talk-doc)
+#. description(texlive-specs-x:texlive-unitsdef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-talk"
+msgid "This package includes the documentation for texlive-unitsdef"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tamefloats:texlive-tamefloats-doc)
-msgid "This package includes the documentation for texlive-tamefloats"
+#. summary(texlive-specs-x:texlive-universa)
+msgid "Herbert Bayer's 'universal' font"
msgstr ""
-#. description(texlive-tap:texlive-tap-doc)
+#. description(texlive-specs-x:texlive-universa)
+msgid ""
+"An implementation of the universal font by Herbert Bayer of the Bauhaus school. The Metafont sources of the fonts, and their LaTeX support, are all supplied in a LaTeX documented source (.dtx) file.\n"
+"\n"
+"date: 2014-05-02 14:40:29 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-universa-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tap"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-universa"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. description(texlive-tapir:texlive-tapir-doc)
+#. description(texlive-specs-x:texlive-universa-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tapir"
+msgid "This package includes the documentation for texlive-universa"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tcldoc:texlive-tcldoc-doc)
+#. summary(texlive-specs-x:texlive-universalis)
+msgid "Universalis font, with support"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-universalis)
+msgid ""
+"This package provides LaTeX, pdfLaTeX, XeLaTeX and LuaLaTeX support for the UniversalisADFStd family of fonts, designed by Hirwin Harendal. The font is suitable as an alternative to fonts such as Adrian Frutiger's Univers and Frutiger.\n"
+"\n"
+"date: 2014-05-06 13:51:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-universalis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tcldoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-universalis"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
-#. description(texlive-tcolorbox:texlive-tcolorbox-doc)
+#. description(texlive-specs-x:texlive-universalis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tcolorbox"
+msgid "This package includes the documentation for texlive-universalis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tdclock:texlive-tdclock-doc)
+#. summary(texlive-specs-x:texlive-universalis-fonts)
#, fuzzy
-msgid "This package includes the documentation for texlive-tdclock"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Severed fonts for texlive-universalis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tdsfrmath:texlive-tdsfrmath-doc)
+#. description(texlive-specs-x:texlive-universalis-fonts)
#, fuzzy
-msgid "This package includes the documentation for texlive-tdsfrmath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "The separated fonts package for texlive-universalis"
+msgstr "Vývojářský balík pro libstroke"
-#. description(texlive-technics:texlive-technics-doc)
+#. summary(texlive-specs-x:texlive-unravel)
+msgid "Watching TeX digest tokens"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-unravel)
+msgid ""
+"The package emulates large parts of TeX's behaviour when it chews on tokens, expanding and performing typesetting commands. Using unravel will let you go one step at a time through some complicated LaTeX code that you are trying to debug. It understands a whole breadth of TeX's features, from deeply nested expansion to box assignments, to characters, and the proper insertion of \\everypar. The unravel package requires up- to-date l3kernel and l3experimental bundles, as well as the new package gtl.\n"
+"\n"
+"date: 2013-08-20 09:39:33 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unravel-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-technics"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-unravel"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ted:texlive-ted-doc)
+#. description(texlive-specs-x:texlive-unravel-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ted"
+msgid "This package includes the documentation for texlive-unravel"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tengwarscript:texlive-tengwarscript-doc)
+#. summary(texlive-specs-x:texlive-unswcover)
+msgid "Typeset a dissertation cover page following UNSW guidelines"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-unswcover)
+msgid ""
+"The package an UNSW cover sheet following the 2011 GRS guidelines. It may also (optionally) provide other required sheets such as Originality, Copyright and Authenticity statements.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-unswcover-doc)
+msgid "Documentation for texlive-unswcover"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-unswcover-doc)
+msgid "This package includes the documentation for texlive-unswcover"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uothesis)
+msgid "Class for dissertations and theses at the University of Oregon"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uothesis)
+msgid ""
+"The class generates documents that are suitable for submission to the Graduate School and conform with the style requirements for dissertations and theses as laid out in the Fall 2010 UO graduate school student manual.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uothesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tengwarscript"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uothesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tensor:texlive-tensor-doc)
+#. description(texlive-specs-x:texlive-uothesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tensor"
+msgid "This package includes the documentation for texlive-uothesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-termcal:texlive-termcal-doc)
+#. summary(texlive-specs-x:texlive-uowthesis)
+msgid "Document class for dissertations at the University of Wollongong"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uowthesis)
+msgid ""
+"A document class for higher degree research theses in compliance with the specifications of University of Wollongong (UoW) theses in the \"Guidelines for Preparation and Submission of Higher Degree Research Theses\" (March 2006), by the Research Student Centre, Research & Innovation Division, UoW.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uowthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-termcal"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uowthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-termlist:texlive-termlist-doc)
+#. description(texlive-specs-x:texlive-uowthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-termlist"
+msgid "This package includes the documentation for texlive-uowthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tetex:texlive-tetex-doc)
+#. summary(texlive-specs-x:texlive-uowthesistitlepage)
+msgid "Title page for dissertations at the University of Wollongong"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uowthesistitlepage)
+msgid ""
+"The package redefines \\maketitle to generate a title page for a University of Wollongong thesis, in accordance with the UoW branding guidelines. The package should be used with the book class to typeset a thesis. The package also defines a \\declaration command that typesets the declaration that this thesis is your own work, etc., which is required in the front of each PhD Thesis.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uowthesistitlepage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tetex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uowthesistitlepage"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-teubner:texlive-teubner-doc)
+#. description(texlive-specs-x:texlive-uowthesistitlepage-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-teubner"
+msgid "This package includes the documentation for texlive-uowthesistitlepage"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tex-ewd:texlive-tex-ewd-doc)
+#. summary(texlive-specs-x:texlive-upca)
+msgid "Print UPC-A barcodes"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-upca)
+msgid ""
+"The package defines a single macro \\upca, to print UPC-A barcodes.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-upca-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tex-ewd"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-upca"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tex-gyre:texlive-tex-gyre-doc)
+#. description(texlive-specs-x:texlive-upca-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tex-gyre"
+msgid "This package includes the documentation for texlive-upca"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tex-gyre-math:texlive-tex-gyre-math-doc)
-msgid "This package includes the documentation for texlive-tex-gyre-math"
+#. summary(texlive-specs-x:texlive-upmethodology)
+msgid "Writing specifications such as for UP-based methodologies"
msgstr ""
-#. description(texlive-tex-label:texlive-tex-label-doc)
+#. description(texlive-specs-x:texlive-upmethodology)
+msgid ""
+"The bundle allows the user to create Unified Process methodology (UP or RUP) based documents. The style provides document versioning, document history, document authors, document validators, specification description, task management, and several helping macros.\n"
+"\n"
+"date: 2014-03-03 16:31:22 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-upmethodology-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tex-label"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-upmethodology"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tex-ps:texlive-tex-ps-doc)
+#. description(texlive-specs-x:texlive-upmethodology-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tex-ps"
+msgid "This package includes the documentation for texlive-upmethodology"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tex4ht:texlive-tex4ht-doc)
+#. summary(texlive-specs-x:texlive-upquote)
+msgid "Show \"realistic\" quotes in verbatim"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-upquote)
+msgid ""
+"Typewriter-style fonts are best for program listings, but Computer Modern Typewriter prints ` and ' as bent opening and closing single quotes. Other fonts, and most programming languages, print ` as a grave accent and ' upright; ' is used both to open and to close quoted strings. The package switches the typewriter font to Computer Modern Typewriter in OT1 encoding, and modifies the behaviour of verbatim, verbatim*, \\verb, and \\verb* to print in the \"` and ' way\". It does thisregardless of other fonts or encodings in use, so long as the package is loaded after the other fonts were. The package does not affect \\tt, \\texttt, etc.\n"
+"\n"
+"date: 2012-04-19 18:55:14 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-upquote-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tex4ht"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-upquote"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texapi:texlive-texapi-doc)
+#. description(texlive-specs-x:texlive-upquote-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texapi"
+msgid "This package includes the documentation for texlive-upquote"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-texconfig:texlive-texconfig-doc)
+#. summary(texlive-specs-x:texlive-uptex)
+msgid "Unicode version of pTeX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uptex)
+msgid ""
+"upTeX is an extension of pTeX, using UTF-8 input and producing UTF-8 output. It was originally designed to improve support for Japanese, but is also useful for documents in Chinese and Korean. It can process Chinese simplified, Chinese traditional, Japanese, and Korean simultaneously, and can also process original LaTeX with \\inputenc{utf8} and Babel (Latin/Cyrillic/Greek etc.) by switching its \\kcatcode tables.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uptex-doc)
+msgid "Documentation for texlive-uptex"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uptex-doc)
+msgid "This package includes the documentation for texlive-uptex"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uri)
+msgid "Hyperlinks for a wide range of URIs"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uri)
+msgid ""
+"The package provides automatic hyperlinks for URIs of type arXiv, ASIN, DOI, HDL, NBN, PubMed, OID, TINY, TINY with preview, and XMPP and provides commands \\citeurl, \\mailto, \\ukoeln and \\uref.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uri-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texconfig"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uri"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texcount:texlive-texcount-doc)
+#. description(texlive-specs-x:texlive-uri-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texcount"
+msgid "This package includes the documentation for texlive-uri"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-texdef:texlive-texdef-doc)
+#. summary(texlive-specs-x:texlive-url)
+msgid "Verbatim with URL-sensitive line breaks"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-url)
+msgid ""
+"The command \\url is a form of verbatim command that allows linebreaks at certain characters or combinations of characters, accepts reconfiguration, and can usually be used in the argument to another command. (The \\urldef command provides robust commands that serve in cases when \\url doesn't work in an argument.) The command is intended for email addresses, hypertext links, directories/paths, etc., which normally have no spaces, so by default the package ignores spaces in its argument. However, a package option \"allows spaces\", which is useful for operating systems where spaces are a common part of file names.\n"
+"\n"
+"date: 2013-12-31 14:02:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-url-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texdef"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-url"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texdiff:texlive-texdiff-doc)
+#. description(texlive-specs-x:texlive-url-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texdiff"
+msgid "This package includes the documentation for texlive-url"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-texdirflatten:texlive-texdirflatten-doc)
+#. summary(texlive-specs-x:texlive-urlbst)
#, fuzzy
-msgid "This package includes the documentation for texlive-texdirflatten"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "MP3 support for k3b"
+msgid "Web support for BibTeX"
+msgstr "Podpora MP3 pro k3b"
-#. description(texlive-texdoc:texlive-texdoc-doc)
+#. description(texlive-specs-x:texlive-urlbst)
+msgid ""
+"Supports a new BibTeX 'webpage' entry type and 'url', 'lastchecked', and 'eprint' and 'DOI' fields. The Perl script urlbst can be used to add this support to an arbitrary .bst file which has a reasonably conventional structure. The result is meant to be robust rather than pretty.\n"
+"\n"
+"date: 2011-11-15 10:50:22 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-urlbst-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texdoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-urlbst"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texdraw:texlive-texdraw-doc)
+#. description(texlive-specs-x:texlive-urlbst-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texdraw"
+msgid "This package includes the documentation for texlive-urlbst"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-texliveonfly:texlive-texliveonfly-doc)
+#. summary(texlive-specs-x:texlive-urwchancal)
+msgid "Use URW's clone of Zapf Chancery as a maths alphabet"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-urwchancal)
+msgid ""
+"The package allows (the URW clone of) Zapf Chancery to function as a maths alphabet, the target of \\mathcal or \\mathscr, with accents appearing where they should, and other spacing parameters set to reasonable (not very tight) values. This package supersedes the pzccal package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-urwchancal-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texliveonfly"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-urwchancal"
+msgstr "HTML dokumentace pro GNU C Library"
-#. description(texlive-texloganalyser:texlive-texloganalyser-doc)
+#. description(texlive-specs-x:texlive-urwchancal-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texloganalyser"
+msgid "This package includes the documentation for texlive-urwchancal"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-texmate:texlive-texmate-doc)
+#. summary(texlive-specs-x:texlive-usebib)
#, fuzzy
-msgid "This package includes the documentation for texlive-texmate"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Multiple Move"
+msgid "A simple bibliography processor"
+msgstr "Program pro přesun a přejmenování více souborů"
-#. description(texlive-texments:texlive-texments-doc)
+#. description(texlive-specs-x:texlive-usebib)
+msgid ""
+"The package is described by its author as \"a poor person's replacement for the more powerful methods provided by biblatex to access data from a .bib file\". Its principle commands are \\bibinput (which specifies a database to use) and \\usebibdata (which typesets a single field from a specified entry in that database.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-usebib-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texments"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-usebib"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texpower:texlive-texpower-doc)
+#. description(texlive-specs-x:texlive-usebib-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texpower"
+msgid "This package includes the documentation for texlive-usebib"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-texshade:texlive-texshade-doc)
+#. summary(texlive-specs-x:texlive-ushort)
+msgid "Shorter (and longer) underlines and underbars"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ushort)
+msgid ""
+"Some engineers need underlined or twice underlined variables for which the usual \\underline is too long. This package provides a generic command for creating underlines of various sizes and types.\n"
+"\n"
+"date: 2012-04-09 07:24:18 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ushort-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texshade"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ushort"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-texsis:texlive-texsis-doc)
+#. description(texlive-specs-x:texlive-ushort-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-texsis"
+msgid "This package includes the documentation for texlive-ushort"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-textcase:texlive-textcase-doc)
+#. summary(texlive-specs-x:texlive-uspatent)
+msgid "U.S. Patent Application Tools for LaTeX and LyX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uspatent)
+msgid ""
+"The package provides a class and other tools for developing a beautifully formatted, consistent U.S. Patent Application using LaTeX and/or LyX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uspatent-doc)
+msgid "Documentation for texlive-uspatent"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uspatent-doc)
+msgid "This package includes the documentation for texlive-uspatent"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ut-thesis)
+msgid "University of Toronto thesis style"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-ut-thesis)
+msgid ""
+"This not described as an 'official' class, just one distributed \"in the hope that it will be useful\". A skeleton file, using the class, is provided.\n"
+"\n"
+"date: 2012-06-01 17:19:53 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-ut-thesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textcase"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-ut-thesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-textfit:texlive-textfit-doc)
+#. description(texlive-specs-x:texlive-ut-thesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textfit"
+msgid "This package includes the documentation for texlive-ut-thesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-textglos:texlive-textglos-doc)
-msgid "This package includes the documentation for texlive-textglos"
+#. summary(texlive-specs-x:texlive-utf8mex)
+msgid "Tools to produce formats that read Polish language input"
msgstr ""
-#. description(texlive-textgreek:texlive-textgreek-doc)
+#. description(texlive-specs-x:texlive-utf8mex)
+msgid ""
+"The bundle provides files for building formats to read input in Polish encodings.\n"
+"\n"
+"date: 2014-04-25 09:20:11 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-utf8mex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textgreek"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-utf8mex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-textmerg:texlive-textmerg-doc)
+#. description(texlive-specs-x:texlive-utf8mex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textmerg"
+msgid "This package includes the documentation for texlive-utf8mex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-textopo:texlive-textopo-doc)
+#. summary(texlive-specs-x:texlive-utopia)
+msgid "Adobe Utopia fonts"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-utopia)
+msgid ""
+"The Adobe Standard Encoding set (upright and italic shapes, medium and bold weights) of the Utopia font family, which Adobe donated to the X Consortium. Macro support, and maths fonts that match the Utopia family, are provided by the Fourier and the Mathdesign font packages.\n"
+"\n"
+"date: 2014-05-21 15:41:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-utopia-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textopo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-utopia"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-textpath:texlive-textpath-doc)
+#. description(texlive-specs-x:texlive-utopia-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textpath"
+msgid "This package includes the documentation for texlive-utopia"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-textpos:texlive-textpos-doc)
+#. summary(texlive-specs-x:texlive-utopia-fonts)
+msgid "Severed fonts for texlive-utopia"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-utopia-fonts)
+msgid "The separated fonts package for texlive-utopia"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uwmslide)
+msgid "Slides with a simple Power Point like appearance"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uwmslide)
+msgid ""
+"A slide format which produces slides with a simple Power Point like appearance. Several useful features include: use of standard titlepage to produce title slide; several slide environments including plain (page with a title), double slide (two column page with slide title), item slide (item list with title), left item slide, and right item slide. Logos are placed in the upper left corner of each slide if the logo file logo.eps is present. Preconfigured in landscape mode by default and uses Times Roman by default (originally, it was claimed, for simple conversion to PDF format).\n"
+"\n"
+"date: 2012-08-13 10:34:19 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uwmslide-doc)
+msgid "Documentation for texlive-uwmslide"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uwmslide-doc)
+msgid "This package includes the documentation for texlive-uwmslide"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uwthesis)
+msgid "University of Washington thesis class"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-uwthesis)
+msgid ""
+"The uwthesis package\n"
+"\n"
+"date: 2011-11-23 22:58:18 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-uwthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-textpos"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-uwthesis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tfrupee:texlive-tfrupee-doc)
+#. description(texlive-specs-x:texlive-uwthesis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tfrupee"
+msgid "This package includes the documentation for texlive-uwthesis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-theoremref:texlive-theoremref-doc)
+#. summary(texlive-specs-x:texlive-vak)
+msgid "BibTeX style for Russian Theses, books, etcetera"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-vak)
+msgid ""
+"The file can be used to format the bibliographies of PhD theses, books etc., according to the latest Russian standards: GOST 7.82 - 2001 and GOST 7.1 - 2003. It introduces the minimum number of new entries and styles to cover all frequently used situations. The style file provides an easy way to perform a semiautomatic, or a completely manual sort of the list of the references. Processing bibliographies produced by the style requires a 8-bit BibTeX system.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-vak-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-theoremref"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vak"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-thesis-titlepage-fhac:texlive-thesis-titlepage-fhac-doc)
+#. description(texlive-specs-x:texlive-vak-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thesis-titlepage-fhac"
+msgid "This package includes the documentation for texlive-vak"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-thinsp:texlive-thinsp-doc)
+#. summary(texlive-specs-x:texlive-vancouver)
+msgid "Bibliographic style file for Biomedical Journals"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-vancouver)
+msgid ""
+"This BibTeX style file is generated with the docstrip utility and modified manually to meet the Uniform Requirements for Manuscripts Submitted to Biomedical Journals as published in N Engl J Med 1997;336:309-315 (also known as the Vancouver style). The complete set of requirements may be viewed on the ICMJE web site.\n"
+"\n"
+"date: 2012-02-26 23:21:15 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-vancouver-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thinsp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vancouver"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-thmbox:texlive-thmbox-doc)
+#. description(texlive-specs-x:texlive-vancouver-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thmbox"
+msgid "This package includes the documentation for texlive-vancouver"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-thmtools:texlive-thmtools-doc)
+#. summary(texlive-specs-x:texlive-variations)
#, fuzzy
-msgid "This package includes the documentation for texlive-thmtools"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Tools for testing of various Bluetooth-functions"
+msgid "Typeset tables of variations of functions"
+msgstr "Testovací nástroje Bluetooth funkcí"
-#. description(texlive-threadcol:texlive-threadcol-doc)
-msgid "This package includes the documentation for texlive-threadcol"
+#. description(texlive-specs-x:texlive-variations)
+msgid ""
+"The package provides macros for typesetting tables showing variations of functions according to French usage. These macros may be used by both LaTeX and plain TeX users.\n"
+"\n"
+"date: 2012-06-24 20:10:37 +0000"
msgstr ""
-#. description(texlive-threeddice:texlive-threeddice-doc)
+#. summary(texlive-specs-x:texlive-variations-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-threeddice"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-variations"
+msgstr "Dokumentace pro castor"
-#. description(texlive-threeparttable:texlive-threeparttable-doc)
+#. description(texlive-specs-x:texlive-variations-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-threeparttable"
+msgid "This package includes the documentation for texlive-variations"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-threeparttablex:texlive-threeparttablex-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-threeparttablex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-x:texlive-varindex)
+msgid "Luxury frontend to the \\index command"
+msgstr ""
-#. description(texlive-thumb:texlive-thumb-doc)
+#. description(texlive-specs-x:texlive-varindex)
+msgid ""
+"Provides a convenient front-end for the \\index command. For example, with it you can generate multiple index entries in almost any form by a single command. The package is highly customizable, and works with all versions of LaTeX and probably most other TeX formats.\n"
+"\n"
+"date: 2013-11-27 06:34:41 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-varindex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thumb"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-varindex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-thumbpdf:texlive-thumbpdf-doc)
+#. description(texlive-specs-x:texlive-varindex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thumbpdf"
+msgid "This package includes the documentation for texlive-varindex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-thumbs:texlive-thumbs-doc)
+#. summary(texlive-specs-x:texlive-varisize)
+msgid "Change font size in Plain TeX"
+msgstr ""
+
+#. description(texlive-specs-x:texlive-varisize)
+msgid ""
+"A series of files, each of which defines a size-change macro. Note that 10point.tex is by convention called by one of the other files, so that there's always a \"way back\".\n"
+"\n"
+"date: 2012-06-24 20:10:37 +0000"
+msgstr ""
+
+#. summary(texlive-specs-x:texlive-varisize-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thumbs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-varisize"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-thumby:texlive-thumby-doc)
+#. description(texlive-specs-x:texlive-varisize-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thumby"
+msgid "This package includes the documentation for texlive-varisize"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-thuthesis:texlive-thuthesis-doc)
+#. summary(texlive-specs-y:texlive-varsfromjobname)
+msgid "Extract variables from the name of the LaTeX file"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-varsfromjobname)
+msgid ""
+"The package allows the user to extract information from the job name, provided that the name has been structured appropriately: the package expects the file name to consist of a set of words separated by hyphens.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-varsfromjobname-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-thuthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-varsfromjobname"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ticket:texlive-ticket-doc)
+#. description(texlive-specs-y:texlive-varsfromjobname-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ticket"
+msgid "This package includes the documentation for texlive-varsfromjobname"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tikz-3dplot:texlive-tikz-3dplot-doc)
+#. summary(texlive-specs-y:texlive-varwidth)
+msgid "A variable-width minipage"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-varwidth)
+msgid ""
+"The varwidth environment is superficially similar to minipage, but the specified width is just a maximum value -- the box may get a narrower \"natural\" width.\n"
+"\n"
+"date: 2012-06-24 20:10:37 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-varwidth-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikz-3dplot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-varwidth"
+msgstr "Dokumentace pro castor"
-#. description(texlive-tikz-cd:texlive-tikz-cd-doc)
+#. description(texlive-specs-y:texlive-varwidth-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikz-cd"
+msgid "This package includes the documentation for texlive-varwidth"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tikz-dependency:texlive-tikz-dependency-doc)
+#. summary(texlive-specs-y:texlive-vaucanson-g)
+msgid "PSTricks macros for drawing automata"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-vaucanson-g)
+msgid ""
+"VauCanSon-G is a package that enables the user to draw automata within texts written using LaTeX. The package macros make use of commands of PStricks\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-vaucanson-g-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikz-dependency"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-vaucanson-g"
+msgstr "Dokumentace pro castor"
-#. description(texlive-tikz-inet:texlive-tikz-inet-doc)
+#. description(texlive-specs-y:texlive-vaucanson-g-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikz-inet"
+msgid "This package includes the documentation for texlive-vaucanson-g"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tikz-qtree:texlive-tikz-qtree-doc)
+#. summary(texlive-specs-y:texlive-vdmlisting)
+msgid "Typesetting VDM in ASCII syntax"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-vdmlisting)
+msgid ""
+"The package is an extension for the listings package that provides a source code printer for LaTeX. This package defines new language definitions and listing environments for the three language dialects of the Vienna Development Method: VDM-SL, VDM-PP and VDM-RT. If one wants to typeset VDM with a mathematical syntax instead of the ASCII syntax used here one should use the vdm package instead\n"
+"\n"
+"date: 2013-06-19 09:29:28 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-vdmlisting-doc)
+msgid "Documentation for texlive-vdmlisting"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-vdmlisting-doc)
+msgid "This package includes the documentation for texlive-vdmlisting"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-velthuis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikz-qtree"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-velthuis"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tikz-timing:texlive-tikz-timing-doc)
+#. description(texlive-specs-y:texlive-velthuis-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikz-timing"
+msgid "This package includes the documentation for texlive-velthuis"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tikzinclude:texlive-tikzinclude-doc)
-msgid "This package includes the documentation for texlive-tikzinclude"
+#. summary(texlive-specs-y:texlive-velthuis-fonts)
+msgid "Severed fonts for texlive-velthuis"
msgstr ""
-#. description(texlive-tikzmark:texlive-tikzmark-doc)
-msgid "This package includes the documentation for texlive-tikzmark"
+#. description(texlive-specs-y:texlive-velthuis-fonts)
+msgid "The separated fonts package for texlive-velthuis"
msgstr ""
-#. description(texlive-tikzorbital:texlive-tikzorbital-doc)
-msgid "This package includes the documentation for texlive-tikzorbital"
+#. summary(texlive-specs-y:texlive-venn)
+msgid "Creating Venn diagrams with MetaPost"
msgstr ""
-#. description(texlive-tikzpagenodes:texlive-tikzpagenodes-doc)
+#. description(texlive-specs-y:texlive-venn)
+msgid ""
+"MetaPost macros for venn diagrams.\n"
+"\n"
+"date: 2012-10-24 13:39:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-venn-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikzpagenodes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-venn"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tikzpfeile:texlive-tikzpfeile-doc)
+#. description(texlive-specs-y:texlive-venn-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tikzpfeile"
+msgid "This package includes the documentation for texlive-venn"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tikzposter:texlive-tikzposter-doc)
-msgid "This package includes the documentation for texlive-tikzposter"
+#. summary(texlive-specs-y:texlive-venndiagram)
+msgid "Creating Venn diagrams with TikZ"
msgstr ""
-#. description(texlive-tikzscale:texlive-tikzscale-doc)
-msgid "This package includes the documentation for texlive-tikzscale"
+#. description(texlive-specs-y:texlive-venndiagram)
+msgid ""
+"The package assists generation of simple two- and three-set Venn diagrams for lectures or assignment sheets. The package requires the TikZ package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-tikzsymbols:texlive-tikzsymbols-doc)
-msgid "This package includes the documentation for texlive-tikzsymbols"
+#. summary(texlive-specs-y:texlive-venndiagram-doc)
+msgid "Documentation for texlive-venndiagram"
msgstr ""
-#. description(texlive-tipa:texlive-tipa-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tipa"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-venndiagram-doc)
+msgid "This package includes the documentation for texlive-venndiagram"
+msgstr ""
-#. description(texlive-titlecaps:texlive-titlecaps-doc)
-msgid "This package includes the documentation for texlive-titlecaps"
+#. summary(texlive-specs-y:texlive-venturisadf)
+msgid "Venturis ADF fonts collection"
msgstr ""
-#. description(texlive-titlepic:texlive-titlepic-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-titlepic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-venturisadf)
+msgid ""
+"Serif and sans serif complete text font families, in both Adobe Type 1 and OpenType formats for publication. The family is based on Utopia family, and has been modified and developed by the Arkandis Digital foundry. Support for using the fonts, in LaTeX, is also provided (and makes use of the nfssext-cfr package).\n"
+"\n"
+"date: 2014-05-21 15:41:13 +0000"
+msgstr ""
-#. description(texlive-titleref:texlive-titleref-doc)
+#. summary(texlive-specs-y:texlive-venturisadf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-titleref"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-venturisadf"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-titlesec:texlive-titlesec-doc)
+#. description(texlive-specs-y:texlive-venturisadf-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-titlesec"
+msgid "This package includes the documentation for texlive-venturisadf"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-titling:texlive-titling-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-titling"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-venturisadf-fonts)
+msgid "Severed fonts for texlive-venturisadf"
+msgstr ""
-#. description(texlive-tkz-base:texlive-tkz-base-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-base"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-venturisadf-fonts)
+msgid "The separated fonts package for texlive-venturisadf"
+msgstr ""
-#. description(texlive-tkz-berge:texlive-tkz-berge-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-berge"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-verbasef)
+msgid "VERBatim Automatic Splitting of External Files"
+msgstr ""
-#. description(texlive-tkz-doc:texlive-tkz-doc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-doc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-verbasef)
+msgid ""
+"The package allows you to input (subsections of a) file, print them in verbatim mode, while automatically breaking up the input lines into pieces of a given length, which are output as figures. These figures are posted using the [H] specification, which forces LaTeX to place the figure at the spot of invocation, rather than floating the figures to the top of the next page. The package requires the verbatim, here and vrbexin packages.\n"
+"\n"
+"date: 2012-04-10 16:37:25 +0000"
+msgstr ""
-#. description(texlive-tkz-euclide:texlive-tkz-euclide-doc)
+#. summary(texlive-specs-y:texlive-verbasef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-euclide"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-verbasef"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tkz-fct:texlive-tkz-fct-doc)
+#. description(texlive-specs-y:texlive-verbasef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-fct"
+msgid "This package includes the documentation for texlive-verbasef"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tkz-graph:texlive-tkz-graph-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-graph"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-verbatimbox)
+msgid "Deposit verbatim text in a box"
+msgstr ""
-#. description(texlive-tkz-kiviat:texlive-tkz-kiviat-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-kiviat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-verbatimbox)
+msgid ""
+"The package provides a verbbox environment (which uses techniques similar to those of the boxedverbatim environment of the moreverb package) to place its contents into a globally available box, or into a box specified by the user. The global box may then be used in a variety of situations (for example, providing a replica of the boxedverbatim environment itself). A valuable use is in places where the standard verbatim environment (which is based on a trivlist) may not appear. The package makes use of the verbatim package (which is a required part of any LaTeX distribution).\n"
+"\n"
+"date: 2014-03-12 18:18:01 +0000"
+msgstr ""
-#. description(texlive-tkz-linknodes:texlive-tkz-linknodes-doc)
+#. summary(texlive-specs-y:texlive-verbatimbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-linknodes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-verbatimbox"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tkz-orm:texlive-tkz-orm-doc)
+#. description(texlive-specs-y:texlive-verbatimbox-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-orm"
+msgid "This package includes the documentation for texlive-verbatimbox"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tkz-tab:texlive-tkz-tab-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tkz-tab"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-verbatimcopy)
+msgid "Make copies of text documents from within LaTeX"
+msgstr ""
-#. description(texlive-tocbibind:texlive-tocbibind-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tocbibind"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-verbatimcopy)
+msgid ""
+"This package provides \\VerbatimCopy{in}{out} that will enable LaTeX to take a verbatim copy of one text file, and save it under another name. The package provides a means to specify the output directory to be used, but does no checking and may therefore overwrite an important file if used injudiciously.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-tocloft:texlive-tocloft-doc)
+#. summary(texlive-specs-y:texlive-verbatimcopy-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tocloft"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-verbatimcopy"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tocvsec2:texlive-tocvsec2-doc)
+#. description(texlive-specs-y:texlive-verbatimcopy-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tocvsec2"
+msgid "This package includes the documentation for texlive-verbatimcopy"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-todo:texlive-todo-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-todo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-verbdef)
+msgid "Define commands which expand to verbatim text"
+msgstr ""
-#. description(texlive-todonotes:texlive-todonotes-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-todonotes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-verbdef)
+msgid ""
+"The package defines a single command \\verbdef (which has a *- form, like \\verb). \\verbdef will define a robust command whose body expands to verbatim text. By using commands defined by \\verbdef, one can put verbatim text into the arguments of commands; since the defined command is robust, it doesn't matter if the argument is moving. (Full details of syntax and caveats about use are in comments in the file itself.)\n"
+"\n"
+"date: 2012-08-16 20:32:31 +0000"
+msgstr ""
-#. description(texlive-tokenizer:texlive-tokenizer-doc)
+#. summary(texlive-specs-y:texlive-verbdef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tokenizer"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-verbdef"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-toolbox:texlive-toolbox-doc)
+#. description(texlive-specs-y:texlive-verbdef-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-toolbox"
+msgid "This package includes the documentation for texlive-verbdef"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tools:texlive-tools-doc)
+#. summary(texlive-specs-y:texlive-verbments)
#, fuzzy
-msgid "This package includes the documentation for texlive-tools"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Syntax Checker for LaTeX Documents"
+msgid "Syntax highlighting of source code in LaTeX documents"
+msgstr "Program pro kontrolu syntaxe pro LaTeX"
-#. description(texlive-topfloat:texlive-topfloat-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-topfloat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-verbments)
+msgid ""
+"The package provides an environment for syntax highlighting source code in LaTeX documents. The highlighted source code output is formatted via powerful Pygments library of the Python language.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-toptesi:texlive-toptesi-doc)
+#. summary(texlive-specs-y:texlive-verbments-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-toptesi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-verbments"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-totcount:texlive-totcount-doc)
+#. description(texlive-specs-y:texlive-verbments-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-totcount"
+msgid "This package includes the documentation for texlive-verbments"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-totpages:texlive-totpages-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-totpages"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-verse)
+msgid "Aids for typesetting simple verse"
+msgstr ""
-#. description(texlive-tpslifonts:texlive-tpslifonts-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tpslifonts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-verse)
+msgid ""
+"The package documentation discusses approaches to the problem; the package is strong on layout, from simple alternate-line indentation to the Mouse's tale from Alice in Wonderland.\n"
+"\n"
+"date: 2014-05-10 09:58:31 +0000"
+msgstr ""
-#. description(texlive-tqft:texlive-tqft-doc)
+#. summary(texlive-specs-y:texlive-verse-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tqft"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-verse"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-trajan:texlive-trajan-doc)
+#. description(texlive-specs-y:texlive-verse-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-trajan"
+msgid "This package includes the documentation for texlive-verse"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tram:texlive-tram-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tram"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-version)
+msgid "Conditionally include text"
+msgstr ""
-#. description(texlive-tree-dvips:texlive-tree-dvips-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tree-dvips"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-version)
+msgid ""
+"Defines macros \\includeversion{NAME} and \\excludeversion{NAME}, each of which defines an environment NAME whose text is to be included or excluded from compilation. Although the command syntax is very similar to that of comment, comment.sty is to be preferred to version.sty for documents where significant chunks of text may be excluded.\n"
+"\n"
+"date: 2011-09-30 20:48:48 +0000"
+msgstr ""
-#. description(texlive-treetex:texlive-treetex-doc)
+#. summary(texlive-specs-y:texlive-version-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-treetex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-version"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-trfsigns:texlive-trfsigns-doc)
+#. description(texlive-specs-y:texlive-version-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-trfsigns"
+msgid "This package includes the documentation for texlive-version"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-trimspaces:texlive-trimspaces-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-trimspaces"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-versions)
+msgid "Optionally omit pieces of text"
+msgstr ""
-#. description(texlive-trivfloat:texlive-trivfloat-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-trivfloat"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-versions)
+msgid ""
+"Stephan Bellantoni's version has provided preamble commands for selecting environments to be included/excluded. This package does the same, but corrects, improves, and extends it in both implementation and function.\n"
+"\n"
+"date: 2011-09-30 20:48:48 +0000"
+msgstr ""
-#. description(texlive-trsym:texlive-trsym-doc)
+#. summary(texlive-specs-y:texlive-versions-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-trsym"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-versions"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-truncate:texlive-truncate-doc)
+#. description(texlive-specs-y:texlive-versions-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-truncate"
+msgid "This package includes the documentation for texlive-versions"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ttfutils:texlive-ttfutils-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ttfutils"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-vertbars)
+msgid "Mark vertical rules in margin of text"
+msgstr ""
-#. description(texlive-tucv:texlive-tucv-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tucv"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-vertbars)
+msgid ""
+"This package is an extension to lineno, replacing that package's line numbers with bars to the left or right of the text.\n"
+"\n"
+"date: 2012-08-17 11:10:56 +0000"
+msgstr ""
-#. description(texlive-tufte-latex:texlive-tufte-latex-doc)
+#. summary(texlive-specs-y:texlive-vertbars-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tufte-latex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vertbars"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-tugboat:texlive-tugboat-doc)
+#. description(texlive-specs-y:texlive-vertbars-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-tugboat"
+msgid "This package includes the documentation for texlive-vertbars"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-tugboat-plain:texlive-tugboat-plain-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tugboat-plain"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-vgrid)
+msgid "Overlay a grid on the printed page"
+msgstr ""
-#. description(texlive-tui:texlive-tui-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-tui"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-vgrid)
+msgid ""
+"The package overlays a grid (whose spacing is \\baselineskip, which offers guidlines for considering the \"rhythm\" of the document on the page.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-turkmen:texlive-turkmen-doc)
+#. summary(texlive-specs-y:texlive-vgrid-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-turkmen"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vgrid"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-turnstile:texlive-turnstile-doc)
+#. description(texlive-specs-y:texlive-vgrid-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-turnstile"
+msgid "This package includes the documentation for texlive-vgrid"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-turnthepage:texlive-turnthepage-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-turnthepage"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-vhistory)
+msgid "Support for creating a change log"
+msgstr ""
-#. description(texlive-twoinone:texlive-twoinone-doc)
+#. description(texlive-specs-y:texlive-vhistory)
+msgid ""
+"Vhistory simplifies the creation of a history of versions of a document. You can easily extract information like the current version of a list of authors from that history. It helps you to get consistent documents. The package sets, which is used by vhistory, allows you to use sets containing text. You can use the usual operations to create the union of sets or the intersection of sets etc.\n"
+"\n"
+"date: 2013-04-21 14:55:16 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-vhistory-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-twoinone"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-vhistory"
+msgstr "Dokumentace pro castor"
-#. description(texlive-twoup:texlive-twoup-doc)
+#. description(texlive-specs-y:texlive-vhistory-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-twoup"
+msgid "This package includes the documentation for texlive-vhistory"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-txfonts:texlive-txfonts-doc)
+#. summary(texlive-specs-y:texlive-visualfaq)
+msgid "A Visual LaTeX FAQ"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-visualfaq)
+msgid ""
+"Having trouble finding the answer to a LaTeX question? The Visual LaTeX FAQ is an innovative new search interface that presents over a hundred typeset samples of frequently requested document formatting. Simply click on a hyperlinked piece of text and the Visual LaTeX FAQ will send your Web browser to the appropriate page in the UK TeX FAQ.\n"
+"\n"
+"date: 2012-06-06 22:20:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-vlna)
+msgid "Package vlna"
+msgstr "Balíček vlna"
+
+#. description(texlive-specs-y:texlive-vlna)
#, fuzzy
-msgid "This package includes the documentation for texlive-txfonts"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Extra packages"
+msgid "The vlna package"
+msgstr "Dodatečné balíčky"
-#. description(texlive-txfontsb:texlive-txfontsb-doc)
+#. summary(texlive-specs-y:texlive-vmargin)
+msgid "Set various page dimensions"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-vmargin)
+msgid ""
+"Provides a macro to set various margins as well as dimensions for header/footer and page dimensions. Most common paper sizes, paper orientation, disabling of headers and footers, and two sided printing are supported. The vmargin package does not rely on other packages and was designed with speed and size in mind. Its user interface might not be very fancy, but it's fast, small, and gets the job done. If you are looking for something more elaborate try the geometry package.\n"
+"\n"
+"date: 2011-10-04 09:41:19 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-vmargin-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-txfontsb"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vmargin"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-txgreeks:texlive-txgreeks-doc)
+#. description(texlive-specs-y:texlive-vmargin-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-txgreeks"
+msgid "This package includes the documentation for texlive-vmargin"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-type1cm:texlive-type1cm-doc)
+#. summary(texlive-specs-y:texlive-vntex)
#, fuzzy
-msgid "This package includes the documentation for texlive-type1cm"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Support for Vietnamese"
+msgstr "České překlady pro KDE"
-#. description(texlive-typeface:texlive-typeface-doc)
-msgid "This package includes the documentation for texlive-typeface"
+#. description(texlive-specs-y:texlive-vntex)
+msgid ""
+"The vntex bundle provides fonts, Plain TeX, texinfo and LaTeX macros for typesetting documents in Vietnamese. Users of the fonts (in both Metafont and Adobe Type 1 format) of this bundle may alternatively use the lm fonts bundle, for which map files are available to provide a Vietnamese version.\n"
+"\n"
+"date: 2013-05-19 12:33:40 +0000"
msgstr ""
-#. description(texlive-typehtml:texlive-typehtml-doc)
+#. summary(texlive-specs-y:texlive-vntex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-typehtml"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vntex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-typeoutfileinfo:texlive-typeoutfileinfo-doc)
+#. description(texlive-specs-y:texlive-vntex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-typeoutfileinfo"
+msgid "This package includes the documentation for texlive-vntex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-typogrid:texlive-typogrid-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-typogrid"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-vntex-fonts)
+msgid "Severed fonts for texlive-vntex"
+msgstr ""
-#. description(texlive-uaclasses:texlive-uaclasses-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-uaclasses"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-vntex-fonts)
+msgid "The separated fonts package for texlive-vntex"
+msgstr ""
-#. description(texlive-uadocs:texlive-uadocs-doc)
-msgid "This package includes the documentation for texlive-uadocs"
+#. summary(texlive-specs-y:texlive-vocaltract)
+msgid "Visualise the vocal tract using LaTeX and PStricks"
msgstr ""
-#. description(texlive-uafthesis:texlive-uafthesis-doc)
+#. description(texlive-specs-y:texlive-vocaltract)
+msgid ""
+"The package enables the user to visualise the vocal tract. The vocal tract (in the package) is manipulated by a vector of articulation parameters according to the S. Maeda model. Animation may be achieved by providing a sequence of vectors over time (e.g., from Matlab). A sequence of vectors for certain German phonemes is embedded in the package, which allows for animation when no other vector is available. The package's graphics are produced using pstricks.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-vocaltract-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uafthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-vocaltract"
+msgstr "Dokumentace pro castor"
-#. description(texlive-ucdavisthesis:texlive-ucdavisthesis-doc)
+#. description(texlive-specs-y:texlive-vocaltract-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ucdavisthesis"
+msgid "This package includes the documentation for texlive-vocaltract"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ucharclasses:texlive-ucharclasses-doc)
-msgid "This package includes the documentation for texlive-ucharclasses"
+#. summary(texlive-specs-y:texlive-volumes)
+msgid "Typeset only parts of a document, with complete indexes etcetera"
msgstr ""
-#. description(texlive-ucs:texlive-ucs-doc)
+#. description(texlive-specs-y:texlive-volumes)
+msgid ""
+"This package helps you if you want to produce separate printed volumes from one LaTeX document, as well as one comprehensive, \"all-inclusive\" version. It suppresses the part of the table of contents that are not typeset, while counters, definitions, index entries etc. are kept consistent throughout the input file.\n"
+"\n"
+"date: 2012-06-06 22:20:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-volumes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ucs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-volumes"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ucthesis:texlive-ucthesis-doc)
+#. description(texlive-specs-y:texlive-volumes-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ucthesis"
+msgid "This package includes the documentation for texlive-volumes"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-uebungsblatt:texlive-uebungsblatt-doc)
+#. summary(texlive-specs-y:texlive-voss-mathcol)
#, fuzzy
-msgid "This package includes the documentation for texlive-uebungsblatt"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Typesetting XML with TeX"
+msgid "Typesetting mathematics in colour, in (La)TeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-uestcthesis:texlive-uestcthesis-doc)
-msgid "This package includes the documentation for texlive-uestcthesis"
+#. description(texlive-specs-y:texlive-voss-mathcol)
+msgid ""
+"This is a short paper from the TeXnische Komodie, in German. Since the body of the paper is dominated by clear LaTeX coding examples, most LaTeX programmers will understand how to achieve the results shown in the diagrams, even if they don't understand German.\n"
+"\n"
+"date: 2014-02-16 22:23:15 +0000"
msgstr ""
-#. description(texlive-uhc:texlive-uhc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-uhc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-voss-mathmode)
+msgid "A comprehensive review of mathematics in (La)TeX"
+msgstr ""
-#. description(texlive-uiucredborder:texlive-uiucredborder-doc)
-msgid "This package includes the documentation for texlive-uiucredborder"
+#. description(texlive-specs-y:texlive-voss-mathmode)
+msgid ""
+"The review includes: Standard LaTeX mathematics mode; AMSmath; TeX and mathematics; Other packages; Tuning math typesetting; Mathematics fonts; Special symbols; Examples; and Lists, bibliography and index.\n"
+"\n"
+"date: 2014-02-16 22:23:15 +0000"
msgstr ""
-#. description(texlive-uiucthesis:texlive-uiucthesis-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-uiucthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-vpe)
+msgid "Source specials for PDF output"
+msgstr ""
-#. description(texlive-ukrhyph:texlive-ukrhyph-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-ukrhyph"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-vpe)
+msgid ""
+"VPE is a system to make the equivalent of \"source special\" marks in a PDF file. Clicking on a mark will activate an editor, pointing at the source line that produced the text that was marked. The system comprises a perl file (vpe.pl) and a LaTeX package (vpe.sty); it will work with PDF files generated via LaTeX/dvips, pdfTeX (version 0.14 or better), and LaTeX/VTeX. Using the LaTeX/dvips or pdfLaTeX routes, the (pdf)TeX processor should be run with shell escapes enabled.\n"
+"\n"
+"date: 2012-04-18 14:26:37 +0000"
+msgstr ""
-#. description(texlive-ulem:texlive-ulem-doc)
+#. summary(texlive-specs-y:texlive-vpe-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ulem"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vpe"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ulqda:texlive-ulqda-doc)
+#. description(texlive-specs-y:texlive-vpe-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ulqda"
+msgid "This package includes the documentation for texlive-vpe"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ulthese:texlive-ulthese-doc)
-msgid "This package includes the documentation for texlive-ulthese"
+#. summary(texlive-specs-y:texlive-vruler)
+msgid "Numbering text"
msgstr ""
-#. description(texlive-umich-thesis:texlive-umich-thesis-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-umich-thesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-vruler)
+msgid ""
+"The package offers facilities for adding a columns of numbering to the general text so that the text can be properly referenced. The vertical ruler can be scaled and moved freely. The package may be used either with LaTeX or with plain TeX.\n"
+"\n"
+"date: 2012-04-10 16:37:25 +0000"
+msgstr ""
-#. description(texlive-uml:texlive-uml-doc)
+#. summary(texlive-specs-y:texlive-vruler-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uml"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vruler"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-umlaute:texlive-umlaute-doc)
+#. description(texlive-specs-y:texlive-vruler-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-umlaute"
+msgid "This package includes the documentation for texlive-vruler"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-umoline:texlive-umoline-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-umoline"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-vwcol)
+msgid "Variable-width multiple text columns"
+msgstr ""
-#. description(texlive-umthesis:texlive-umthesis-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-umthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-vwcol)
+msgid ""
+"The package provides a crude environment (vwcol) for typesetting multicolumn paragraph text of various column widths on a single page.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
-#. description(texlive-unamthesis:texlive-unamthesis-doc)
+#. summary(texlive-specs-y:texlive-vwcol-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-unamthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-vwcol"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-underlin:texlive-underlin-doc)
+#. description(texlive-specs-y:texlive-vwcol-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-underlin"
+msgid "This package includes the documentation for texlive-vwcol"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-underoverlap:texlive-underoverlap-doc)
-msgid "This package includes the documentation for texlive-underoverlap"
+#. summary(texlive-specs-y:texlive-wadalab)
+msgid "Wadalab (Japanese) font packages"
msgstr ""
-#. description(texlive-underscore:texlive-underscore-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-underscore"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-wadalab)
+msgid ""
+"These are font bundles for the Japanese Wadalab fonts which work with the CJK package. All subfonts now have glyph names compliant to the Adobe Glyph List, making ToUnicode CMaps in PDF documents (created automatically by dvipdfmx) work correctly. All font bundles now contain virtual Unicode subfonts.\n"
+"\n"
+"date: 2014-05-20 13:07:59 +0000"
+msgstr ""
-#. description(texlive-undolabl:texlive-undolabl-doc)
+#. summary(texlive-specs-y:texlive-wadalab-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-undolabl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wadalab"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-uni-wtal-ger:texlive-uni-wtal-ger-doc)
+#. description(texlive-specs-y:texlive-wadalab-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uni-wtal-ger"
+msgid "This package includes the documentation for texlive-wadalab"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-uni-wtal-lin:texlive-uni-wtal-lin-doc)
-msgid "This package includes the documentation for texlive-uni-wtal-lin"
+#. summary(texlive-specs-y:texlive-wadalab-fonts)
+msgid "Severed fonts for texlive-wadalab"
msgstr ""
-#. description(texlive-unicode-math:texlive-unicode-math-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-unicode-math"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-wadalab-fonts)
+msgid "The separated fonts package for texlive-wadalab"
+msgstr ""
-#. description(texlive-unisugar:texlive-unisugar-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-unisugar"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-wallpaper)
+msgid "Easy addition of wallpapers (background images) to LaTeX documents, including tiling"
+msgstr ""
-#. description(texlive-units:texlive-units-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-units"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-wallpaper)
+msgid ""
+"This collection contains files to add wallpapers (background images) to LaTeX documents. It uses the eso-pic package, but provides simple commands to include effects such as tiling. An example is provided, which works under both LaTeX and pdfLaTeX.\n"
+"\n"
+"date: 2012-05-04 10:49:06 +0000"
+msgstr ""
-#. description(texlive-unitsdef:texlive-unitsdef-doc)
+#. summary(texlive-specs-y:texlive-wallpaper-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-unitsdef"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wallpaper"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-universa:texlive-universa-doc)
+#. description(texlive-specs-y:texlive-wallpaper-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-universa"
+msgid "This package includes the documentation for texlive-wallpaper"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-unswcover:texlive-unswcover-doc)
-msgid "This package includes the documentation for texlive-unswcover"
+#. summary(texlive-specs-y:texlive-warning)
+msgid "Global warnings at the end of the logfile"
msgstr ""
-#. description(texlive-uothesis:texlive-uothesis-doc)
+#. description(texlive-specs-y:texlive-warning)
+msgid ""
+"This package provides a command that generates a list of warnings that are printed out at the very end of the logfile. This is useful for warnings such as 'Rerun for this or that reason' or 'This is a draft, change it before the final run'.\n"
+"\n"
+"date: 2012-05-04 10:49:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-warning-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uothesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-warning"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-uowthesis:texlive-uowthesis-doc)
+#. description(texlive-specs-y:texlive-warning-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uowthesis"
+msgid "This package includes the documentation for texlive-warning"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-upca:texlive-upca-doc)
+#. summary(texlive-specs-y:texlive-warpcol)
+msgid "Relative alignment of rows in numeric columns in tabulars"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-warpcol)
+msgid ""
+"Defines a tabular column type for formatting numerical columns in LaTeX. The column type enables numerical items to be right justified relative to each other, while centred beneath the column label. In addition, macros are provided to enable variations on this column type to be defined. Usage of the package is superficially similar to that of dcolumn; however, the alignment scheme is different, and the packages have different, though overlapping, applications.\n"
+"\n"
+"date: 2012-05-04 10:49:06 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-warpcol-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-upca"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-warpcol"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-upmethodology:texlive-upmethodology-doc)
+#. description(texlive-specs-y:texlive-warpcol-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-upmethodology"
+msgid "This package includes the documentation for texlive-warpcol"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-upquote:texlive-upquote-doc)
+#. summary(texlive-specs-y:texlive-was)
#, fuzzy
-msgid "This package includes the documentation for texlive-upquote"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "A collection of small packages by Walter Schmidt"
+msgstr "Kolekce užitečných knihoven pro hry"
-#. description(texlive-uptex:texlive-uptex-doc)
-msgid "This package includes the documentation for texlive-uptex"
+#. description(texlive-specs-y:texlive-was)
+msgid ""
+"A bundle of packages that arise in the author's area of interest: compliance of maths typesetting with ISO standards; symbols that work in both maths and text modes; commas for both decimal separator and maths; and upright Greek letters in maths.\n"
+"\n"
+"date: 2013-12-13 23:38:02 +0000"
msgstr ""
-#. description(texlive-uri:texlive-uri-doc)
+#. summary(texlive-specs-y:texlive-was-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uri"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-was"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-url:texlive-url-doc)
+#. description(texlive-specs-y:texlive-was-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-url"
+msgid "This package includes the documentation for texlive-was"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-urlbst:texlive-urlbst-doc)
+#. summary(texlive-specs-y:texlive-wasy)
+msgid "The wasy fonts (Waldi symbol fonts)"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-wasy)
+msgid ""
+"These are the wasy (Waldi symbol) fonts, second release. This bundle presents the fonts in Metafont format, but they are also available in Adobe Type 1 format. Support under LaTeX is provided by the wasysym package.\n"
+"\n"
+"date: 2014-05-20 13:07:59 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wasy-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-urlbst"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wasy"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-urwchancal:texlive-urwchancal-doc)
+#. description(texlive-specs-y:texlive-wasy-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-urwchancal"
+msgid "This package includes the documentation for texlive-wasy"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-usebib:texlive-usebib-doc)
+#. summary(texlive-specs-y:texlive-wasy-fonts)
+msgid "Severed fonts for texlive-wasy"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-wasy-fonts)
+msgid "The separated fonts package for texlive-wasy"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wasysym)
+msgid "LaTeX support file to use the WASY2 fonts"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-wasysym)
+msgid ""
+"The WASY2 (Waldi Symbol) font by Roland Waldi provides many glyphs like male and female symbols and astronomical symbols, as well as the complete lasy font set and other odds and ends. The wasysym package implements an easy to use interface for these symbols.\n"
+"\n"
+"date: 2012-06-08 10:16:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wasysym-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-usebib"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wasysym"
+msgstr "Dokumentace pro castor"
-#. description(texlive-ushort:texlive-ushort-doc)
+#. description(texlive-specs-y:texlive-wasysym-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ushort"
+msgid "This package includes the documentation for texlive-wasysym"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-uspatent:texlive-uspatent-doc)
-msgid "This package includes the documentation for texlive-uspatent"
+#. summary(texlive-specs-y:texlive-web)
+msgid "Original web programs tangle and weave"
msgstr ""
-#. description(texlive-ut-thesis:texlive-ut-thesis-doc)
+#. description(texlive-specs-y:texlive-web)
+msgid ""
+"The system processes 'web' files in two ways: firstly to rearrange them to produce compilable code (using the program tangle), and secondly to produce a TeX source (using the program weave) that may be typeset for comfortable reading.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-webguide)
+msgid "Brief Guide to LaTeX Tools for Web publishing"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-webguide)
+msgid ""
+"The documentation constitutes an example of the package's own recommendations (being presented both in PDF and HTML).\n"
+"\n"
+"date: 2012-08-15 19:05:41 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-widetable)
+msgid "An environment for typesetting tables of specified width"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-widetable)
+msgid ""
+"The package defines a new environment that, unlike tabularX, typesets a table of specified width by working on the inter- column glue; the tabular cells will all be stretched (or shrunk) according to need. The package will use the e-TeX arithmetic extensions if they are available (they are, in most modern distributions).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-widetable-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ut-thesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-widetable"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-utf8mex:texlive-utf8mex-doc)
+#. description(texlive-specs-y:texlive-widetable-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-utf8mex"
+msgid "This package includes the documentation for texlive-widetable"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-utopia:texlive-utopia-doc)
+#. summary(texlive-specs-y:texlive-williams)
#, fuzzy
-msgid "This package includes the documentation for texlive-utopia"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Miscellaneous macros by Peter Williams"
+msgstr "Různé"
-#. description(texlive-uwmslide:texlive-uwmslide-doc)
-msgid "This package includes the documentation for texlive-uwmslide"
+#. description(texlive-specs-y:texlive-williams)
+msgid ""
+"The bundle provides two packages: - antree, which provides macros for annotated node trees, and - toklist, which is an implementation of Knuth's token list macros, to be found on pp.378-379 of the TeXbook.\n"
+"\n"
+"date: 2012-08-15 19:05:41 +0000"
msgstr ""
-#. description(texlive-uwthesis:texlive-uwthesis-doc)
+#. summary(texlive-specs-y:texlive-williams-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-uwthesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for digiKam"
+msgid "Documentation for texlive-williams"
+msgstr "Dokumentace pro digiKam"
-#. description(texlive-vak:texlive-vak-doc)
+#. description(texlive-specs-y:texlive-williams-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vak"
+msgid "This package includes the documentation for texlive-williams"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-vancouver:texlive-vancouver-doc)
+#. summary(texlive-specs-y:texlive-withargs)
+msgid "Ephemeral macro use"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-withargs)
+msgid ""
+"The withargs package\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-withargs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vancouver"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-withargs"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-variations:texlive-variations-doc)
+#. description(texlive-specs-y:texlive-withargs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-variations"
+msgid "This package includes the documentation for texlive-withargs"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-varindex:texlive-varindex-doc)
+#. summary(texlive-specs-y:texlive-wnri)
+msgid "Ridgeway's fonts"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-wnri)
+msgid ""
+"Fonts (as Metafont source) for Old English, Indic languages in Roman transliteration and Puget Salish (Lushootseed) and other Native American languages.\n"
+"\n"
+"date: 2014-05-20 12:46:50 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wnri-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-varindex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wnri"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-varisize:texlive-varisize-doc)
+#. description(texlive-specs-y:texlive-wnri-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-varisize"
+msgid "This package includes the documentation for texlive-wnri"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-varsfromjobname:texlive-varsfromjobname-doc)
+#. summary(texlive-specs-y:texlive-wnri-latex)
#, fuzzy
-msgid "This package includes the documentation for texlive-varsfromjobname"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "LaTeX support for wnri fonts"
+msgstr "XML podpora pro castor"
-#. description(texlive-varwidth:texlive-varwidth-doc)
+#. description(texlive-specs-y:texlive-wnri-latex)
+msgid ""
+"LaTeX support for the wnri fonts.\n"
+"\n"
+"date: 2014-05-20 12:45:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wnri-latex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-varwidth"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wnri-latex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-vaucanson-g:texlive-vaucanson-g-doc)
+#. description(texlive-specs-y:texlive-wnri-latex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vaucanson-g"
+msgid "This package includes the documentation for texlive-wnri-latex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-vdmlisting:texlive-vdmlisting-doc)
-msgid "This package includes the documentation for texlive-vdmlisting"
+#. summary(texlive-specs-y:texlive-wordlike)
+msgid "Simulating word processor layout"
msgstr ""
-#. description(texlive-velthuis:texlive-velthuis-doc)
+#. description(texlive-specs-y:texlive-wordlike)
+msgid ""
+"The package simulates typical word processor layout: narrow page margins, Times, Helvetica and Courier fonts, \\LARGE or \\Large headings, and \\sloppy typesetting. The package aims at making life easier for users who are discontent with LaTeX's standard layout settings because they need a layout that resembles the usual \"wordlike\" output. The design of the package draws on several discussions in the de.comp.text.tex and comp.text.tex newsgroups that are referred to in the manual.\n"
+"\n"
+"date: 2012-06-08 10:16:32 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wordlike-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-velthuis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wordlike"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-venn:texlive-venn-doc)
+#. description(texlive-specs-y:texlive-wordlike-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-venn"
+msgid "This package includes the documentation for texlive-wordlike"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-venndiagram:texlive-venndiagram-doc)
-msgid "This package includes the documentation for texlive-venndiagram"
+#. summary(texlive-specs-y:texlive-wrapfig)
+msgid "Produces figures which text can flow around"
msgstr ""
-#. description(texlive-venturisadf:texlive-venturisadf-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-venturisadf"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-wrapfig)
+msgid ""
+"Allows figures or tables to have text wrapped around them. Does not work in combination with list environments, but can be used in a parbox or minipage, and in twocolumn format. Supports the float package.\n"
+"\n"
+"date: 2012-05-30 12:33:40 +0000"
+msgstr ""
-#. description(texlive-verbasef:texlive-verbasef-doc)
+#. summary(texlive-specs-y:texlive-wrapfig-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-verbasef"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wrapfig"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-verbatimbox:texlive-verbatimbox-doc)
+#. description(texlive-specs-y:texlive-wrapfig-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-verbatimbox"
+msgid "This package includes the documentation for texlive-wrapfig"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-verbatimcopy:texlive-verbatimcopy-doc)
+#. summary(texlive-specs-y:texlive-wsemclassic)
+msgid "LaTeX class for Bavarian school w-seminar papers"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-wsemclassic)
+msgid ""
+"The class is designed either to conform with the recommendations of the Bavarian Kultusministerium for typesetting w-seminar papers (strict mode), or to use another style which should look better. The class is based on the LaTeX standard report class.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wsemclassic-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-verbatimcopy"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-wsemclassic"
+msgstr "Dokumentace pro castor"
-#. description(texlive-verbdef:texlive-verbdef-doc)
+#. description(texlive-specs-y:texlive-wsemclassic-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-verbdef"
+msgid "This package includes the documentation for texlive-wsemclassic"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-verbments:texlive-verbments-doc)
+#. summary(texlive-specs-y:texlive-wsuipa)
#, fuzzy
-msgid "This package includes the documentation for texlive-verbments"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "The International Phonetic Alphabet font for the X Window System."
+msgid "International Phonetic Alphabet fonts"
+msgstr "Mezinárodní fonetická abeceda jako písmo pro X11."
-#. description(texlive-verse:texlive-verse-doc)
+#. description(texlive-specs-y:texlive-wsuipa)
+msgid ""
+"The package provides a 7-bit IPA font, as Metafont source, and macros for support under TeXt1 and LaTeX. The fonts (and macros) are now largely superseded by the tipa fonts.\n"
+"\n"
+"date: 2012-01-27 12:33:18 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-wsuipa-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-verse"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-wsuipa"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-version:texlive-version-doc)
+#. description(texlive-specs-y:texlive-wsuipa-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-version"
+msgid "This package includes the documentation for texlive-wsuipa"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-versions:texlive-versions-doc)
+#. summary(texlive-specs-y:texlive-xargs)
+msgid "Define commands with many optional arguments"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xargs)
+msgid ""
+"The package provides extended versions of \\newcommand and related LaTeX commands, which allow easy and robust definition of macros with many optional arguments, using a clear and simple xkeyval-style syntax.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xargs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-versions"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xargs"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-vertbars:texlive-vertbars-doc)
+#. description(texlive-specs-y:texlive-xargs-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vertbars"
+msgid "This package includes the documentation for texlive-xargs"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-vhistory:texlive-vhistory-doc)
+#. summary(texlive-specs-y:texlive-xcharter)
#, fuzzy
-msgid "This package includes the documentation for texlive-vhistory"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Extension of Bitstream Charter fonts"
+msgstr "SSL rozšíření k perl-ladp"
-#. description(texlive-vmargin:texlive-vmargin-doc)
+#. description(texlive-specs-y:texlive-xcharter)
+msgid ""
+"The package presents an extension of Bitstream Charter, which provides small caps, oldstyle figures and superior figures in all four styles, accompanied by LaTeX font support files. The fonts themselves are provided in both Adobe Type 1 and OTF formats, with supporting files as necessary.\n"
+"\n"
+"date: 2014-04-28 12:35:24 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xcharter-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vmargin"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Documentation for castor"
+msgid "Documentation for texlive-xcharter"
+msgstr "Dokumentace pro castor"
-#. description(texlive-vntex:texlive-vntex-doc)
+#. description(texlive-specs-y:texlive-xcharter-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vntex"
+msgid "This package includes the documentation for texlive-xcharter"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-vocaltract:texlive-vocaltract-doc)
+#. summary(texlive-specs-y:texlive-xcharter-fonts)
#, fuzzy
-msgid "This package includes the documentation for texlive-vocaltract"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Severed fonts for texlive-xcharter"
+msgstr "Vývojářský balík pro libstroke"
-#. description(texlive-volumes:texlive-volumes-doc)
+#. description(texlive-specs-y:texlive-xcharter-fonts)
#, fuzzy
-msgid "This package includes the documentation for texlive-volumes"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "The separated fonts package for texlive-xcharter"
+msgstr "Vývojářský balík pro libstroke"
-#. description(texlive-vpe:texlive-vpe-doc)
+#. summary(texlive-specs-y:texlive-xcite)
+msgid "Use citation keys from a different document"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xcite)
+msgid ""
+"The package lets you use citation keys from another document, just as the xr package allows cross-document use of labels.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xcite-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vpe"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xcite"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-vruler:texlive-vruler-doc)
+#. description(texlive-specs-y:texlive-xcite-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vruler"
+msgid "This package includes the documentation for texlive-xcite"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-vwcol:texlive-vwcol-doc)
+#. summary(texlive-specs-y:texlive-xcjk2uni)
+msgid "Convert CJK characters to Unicode, in pdfTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xcjk2uni)
+msgid ""
+"The package provides commands to convert CJK characters to Unicode in non-UTF-8 encoding; it provides hooks to support hyperref in producing correct bookmarks. The bundle also provides /ToUnicode mapping file(s) for a CJK subfont; these can be used with the cmap package, allowing searches of, and cut-and-paste operations on a PDF file generated by pdfTeX..\n"
+"\n"
+"date: 2014-05-18 05:46:02 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xcjk2uni-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-vwcol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xcjk2uni"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-wadalab:texlive-wadalab-doc)
+#. description(texlive-specs-y:texlive-xcjk2uni-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wadalab"
+msgid "This package includes the documentation for texlive-xcjk2uni"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-wallpaper:texlive-wallpaper-doc)
+#. summary(texlive-specs-y:texlive-xcolor)
+msgid "Driver-independent color extensions for LaTeX and pdfLaTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xcolor)
+msgid ""
+"The package starts from the basic facilities of the color package, and provides easy driver-independent access to several kinds of color tints, shades, tones, and mixes of arbitrary colors. It allows a user to select a document-wide target color model and offers complete tools for conversion between eight color models. Additionally, there is a command for alternating row colors plus repeated non-aligned material (like horizontal lines) in tables. Colors can be mixed like \\color{red!30!green!40!blue}.\n"
+"\n"
+"date: 2011-11-28 12:31:05 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xcolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wallpaper"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xcolor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-warning:texlive-warning-doc)
+#. description(texlive-specs-y:texlive-xcolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-warning"
+msgid "This package includes the documentation for texlive-xcolor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-warpcol:texlive-warpcol-doc)
+#. summary(texlive-specs-y:texlive-xcomment)
+msgid "Allows selected environments to be included/excluded"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xcomment)
+msgid ""
+"The package defines an environment that only typesets specified environments within its scope. So, for example, if you want nothing but the figure and table environments in your document, you can enclose the whole document with an xcomment environment that excludes everything but. This is a lot easier than excluding the chunks of text between the environments you want, or creating an entire document containing only those environments. The package was previously part of the seminar bundle for typesetting presentations.\n"
+"\n"
+"date: 2011-09-30 20:48:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xcomment-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-warpcol"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xcomment"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-was:texlive-was-doc)
+#. description(texlive-specs-y:texlive-xcomment-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-was"
+msgid "This package includes the documentation for texlive-xcomment"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-wasy:texlive-wasy-doc)
+#. summary(texlive-specs-y:texlive-xcookybooky)
+msgid "Typeset (potentially long) recipes"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xcookybooky)
+msgid ""
+"The package enables the user to typeset recipes, which could be greater than one page. Above the recipe text two (optional) pictures can be displayed. Other features are recipe name, energy content, portions, preparation and baking time, baking temperatures, recipe source and of course preparation steps and required ingredients. At the bottom you may insert an optional hint. The package depends on the Emerald fonts.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xcookybooky-doc)
+msgid "Documentation for texlive-xcookybooky"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xcookybooky-doc)
+msgid "This package includes the documentation for texlive-xcookybooky"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xdoc)
+msgid "Extending the LaTeX doc system"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xdoc)
+msgid ""
+"Xdoc is a project to rewrite the implementation of the LaTeX doc package (in a broader sense) to make its features more general and flexible. For example, where doc only provides commands for documenting macros and environments, xdoc also provides commands for similarly documenting package options and switches. This is furthermore done in such a way that it is very easy to add more such commands for documenting things, such as e.g., templates (an important concept in the future LaTeX3) and program components for other languages (functions, classes, procedures, etc.). A side effect is that many minor bugs in doc are fixed. The design aims to take advantage of many still experimental features of future versions of LaTeX, but since these are neither reasonably stable nor widely available, the configuration interfaces and package author commands of xdoc are likely to change. To still provide a stable interface for other packages to build upon, the actual package names include a \"major
version number\" of sorts. The drop-in replacement package for standard doc is xdoc2; it requires nothing outside standard LaTeX2e. The docindex/docidx2e package changes the index and list of changes typesetting so that none of the formatting has to be controlled via the index style file. The docindex package provides control of formatting via templates (nice interface, but requires several experimental packages), whereas the docidx2e package has traditional raw macro interfaces and works with standard LaTeX2e.\n"
+"\n"
+"date: 2012-05-21 22:51:01 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xdoc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wasy"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xdoc"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-wasysym:texlive-wasysym-doc)
+#. description(texlive-specs-y:texlive-xdoc-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wasysym"
+msgid "This package includes the documentation for texlive-xdoc"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-widetable:texlive-widetable-doc)
+#. summary(texlive-specs-y:texlive-xdvi)
#, fuzzy
-msgid "This package includes the documentation for texlive-widetable"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "A PDF File Viewer for the X Window System"
+msgid "A DVI previewer for the X Window System"
+msgstr "Prohlížeč PDF souborů pro X11"
-#. description(texlive-williams:texlive-williams-doc)
+#. description(texlive-specs-y:texlive-xdvi)
+msgid ""
+"The canonical previewer for use on Unix and other X-windows based systems. The distribution has been integrated with that of xdvik (no longer separately available), so that it will build with web2c \"out of the box\". In practice, it is usually distributed via Tex-live.\n"
+"\n"
+"date: 2014-04-22 09:35:25 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xdvi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-williams"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xdvi"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-wnri:texlive-wnri-doc)
+#. description(texlive-specs-y:texlive-xdvi-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wnri"
+msgid "This package includes the documentation for texlive-xdvi"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-wnri-latex:texlive-wnri-latex-doc)
+#. summary(texlive-specs-y:texlive-xecjk)
+msgid "Support for CJK documents in XeLaTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xecjk)
+msgid ""
+"A LaTeX package for typesetting CJK documents in the way users have become used to, in the CJK package. The package requires a current version of xtemplate (and hence of the current LaTeX 3 development environment).\n"
+"\n"
+"date: 2014-05-17 20:15:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xecjk-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wnri-latex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xecjk"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-wordlike:texlive-wordlike-doc)
+#. description(texlive-specs-y:texlive-xecjk-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wordlike"
+msgid "This package includes the documentation for texlive-xecjk"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-wrapfig:texlive-wrapfig-doc)
+#. summary(texlive-specs-y:texlive-xecolor)
+msgid "Support for color in XeLaTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xecolor)
+msgid ""
+"This is a simple package which defines about 140 different colours using XeTeX's colour feature. The colours can be used in bidirectional texts without any problem.\n"
+"\n"
+"date: 2014-04-29 04:13:54 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xecolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wrapfig"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xecolor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-wsuipa:texlive-wsuipa-doc)
+#. description(texlive-specs-y:texlive-xecolor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-wsuipa"
+msgid "This package includes the documentation for texlive-xecolor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xargs:texlive-xargs-doc)
+#. summary(texlive-specs-y:texlive-xecyr)
+msgid "Using Cyrillic languages in XeTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xecyr)
+msgid ""
+"Helper tools for using Cyrillic languages with XeLaTeX and babel.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xecyr-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xargs"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xecyr"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xcite:texlive-xcite-doc)
+#. description(texlive-specs-y:texlive-xecyr-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xcite"
+msgid "This package includes the documentation for texlive-xecyr"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xcolor:texlive-xcolor-doc)
+#. summary(texlive-specs-y:texlive-xeindex)
+msgid "Automatic index generation for XeLaTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xeindex)
+msgid ""
+"The package is based on XeSearch, and will automatically index words or phrases in an XeLaTeX document. Words are declared in a list, and every occurrence then creates an index entry whose content can be fully specified beforehand.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xeindex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xcolor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xeindex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xcomment:texlive-xcomment-doc)
+#. description(texlive-specs-y:texlive-xeindex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xcomment"
+msgid "This package includes the documentation for texlive-xeindex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xcookybooky:texlive-xcookybooky-doc)
-msgid "This package includes the documentation for texlive-xcookybooky"
+#. summary(texlive-specs-y:texlive-xepersian)
+msgid "Persian for LaTeX, using XeTeX"
msgstr ""
-#. description(texlive-xdoc:texlive-xdoc-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xdoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-xepersian)
+msgid ""
+"The package supports Persian typesetting, using the Persian Modern fonts, by default.\n"
+"\n"
+"date: 2014-04-28 06:25:15 +0000"
+msgstr ""
-#. description(texlive-xdvi:texlive-xdvi-doc)
+#. summary(texlive-specs-y:texlive-xepersian-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xdvi"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xepersian"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xecjk:texlive-xecjk-doc)
+#. description(texlive-specs-y:texlive-xepersian-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xecjk"
+msgid "This package includes the documentation for texlive-xepersian"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xecolor:texlive-xecolor-doc)
+#. summary(texlive-specs-y:texlive-xesearch)
+msgid "A string finder for XeTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xesearch)
+msgid ""
+"The package finds strings (e.g. (parts of) words or phrases) and manipulates them (apply any macro), thus turning each word or phrase into a possible command. It is written in plain XeTeX and should thus work with any format (it is known to work with LaTeX and ConTeXt). The main application for the moment is XeIndex, an automatic index for XeLaTeX, but examples are given of simple use to check spelling, count words, and highlight syntax of programming languages.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xesearch-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xecolor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xesearch"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xecyr:texlive-xecyr-doc)
+#. description(texlive-specs-y:texlive-xesearch-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xecyr"
+msgid "This package includes the documentation for texlive-xesearch"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xeindex:texlive-xeindex-doc)
+#. summary(texlive-specs-y:texlive-xetex)
+msgid "Unicode and OpenType-enabled TeX engine"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex)
+msgid ""
+"See http://tug.org/xetex.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetex-def)
+msgid "Colour and graphics support for XeTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex-def)
+msgid ""
+"The file xetex.def provides device-specific definitions for colour and graphics support when running Xe(La)TeX\n"
+"\n"
+"date: 2014-05-02 16:56:42 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetex-devanagari)
+msgid "XeTeX input map for Unicode Devanagari"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex-devanagari)
+msgid ""
+"The package provides a map for use with Jonathan Kew's TECkit, to translate Devanagari (encoded according to the Harvard/Kyoto convention) to Unicode (range 0900-097F).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetex-devanagari-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xeindex"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xetex-devanagari"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xepersian:texlive-xepersian-doc)
+#. description(texlive-specs-y:texlive-xetex-devanagari-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xepersian"
+msgid "This package includes the documentation for texlive-xetex-devanagari"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xesearch:texlive-xesearch-doc)
+#. summary(texlive-specs-y:texlive-xetex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xesearch"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xetex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xetex:texlive-xetex-doc)
+#. description(texlive-specs-y:texlive-xetex-doc)
#, fuzzy
msgid "This package includes the documentation for texlive-xetex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xetex-devanagari:texlive-xetex-devanagari-doc)
+#. summary(texlive-specs-y:texlive-xetex-itrans)
+msgid "Itrans input maps for use with XeLaTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex-itrans)
+msgid ""
+"The package provides maps for use with XeLaTeX with coding done using itrans. Fontspec maps are provided for Devanagari (Sanskrit), for Sanskrit in Kannada and for Kannada itself.\n"
+"\n"
+"date: 2014-05-20 12:45:48 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetex-itrans-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xetex-devanagari"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xetex-itrans"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xetex-itrans:texlive-xetex-itrans-doc)
+#. description(texlive-specs-y:texlive-xetex-itrans-doc)
#, fuzzy
msgid "This package includes the documentation for texlive-xetex-itrans"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xetex-pstricks:texlive-xetex-pstricks-doc)
+#. summary(texlive-specs-y:texlive-xetex-pstricks)
+msgid "Running PStricks under XeTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex-pstricks)
+msgid ""
+"The package provides an indirection scheme for XeTeX to use the pstricks xdvipdfmx.cfg configuration file, so that XeTeX documents will load it in preference to the standard pstricks.con configuration file. With this configuration, many PSTricks features can be used in xelatex or plain xetex documents.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetex-pstricks-doc)
#, fuzzy
+msgid "Documentation for texlive-xetex-pstricks"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xetex-pstricks-doc)
+#, fuzzy
msgid "This package includes the documentation for texlive-xetex-pstricks"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xetex-tibetan:texlive-xetex-tibetan-doc)
+#. summary(texlive-specs-y:texlive-xetex-tibetan)
+msgid "XeTeX input maps for Unicode Tibetan"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex-tibetan)
+msgid ""
+"The package provides a map for use with Jonathan Kew's TECkit, to translate Tibetan to Unicode (range 0F00-0FFF).\n"
+"\n"
+"date: 2013-01-26 19:44:01 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetex-tibetan-doc)
+msgid "Documentation for texlive-xetex-tibetan"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetex-tibetan-doc)
msgid "This package includes the documentation for texlive-xetex-tibetan"
msgstr ""
-#. description(texlive-xetexfontinfo:texlive-xetexfontinfo-doc)
+#. summary(texlive-specs-y:texlive-xetexconfig)
#, fuzzy
-msgid "This package includes the documentation for texlive-xetexfontinfo"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Configuration files for XeTeX"
+msgstr "Změněné konfigurační soubory pro %s:"
-#. description(texlive-xetexko:texlive-xetexko-doc)
-msgid "This package includes the documentation for texlive-xetexko"
+#. description(texlive-specs-y:texlive-xetexconfig)
+msgid "unicode-letters, and special crop.cfg and hyperref.cfg for XeTeX."
msgstr ""
-#. description(texlive-xevlna:texlive-xevlna-doc)
-msgid "This package includes the documentation for texlive-xevlna"
+#. summary(texlive-specs-y:texlive-xetexfontinfo)
+msgid "Report font features in XeTeX"
msgstr ""
-#. description(texlive-xfor:texlive-xfor-doc)
+#. description(texlive-specs-y:texlive-xetexfontinfo)
+msgid ""
+"A pair of documents to reveal the font features supported by fonts usable in XeTeX. Use OpenType-info.tex for OpenType fonts, and AAT-info.tex for AAT fonts (Mac OS X only).\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetexfontinfo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xfor"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xetexfontinfo"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xgreek:texlive-xgreek-doc)
+#. description(texlive-specs-y:texlive-xetexfontinfo-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xgreek"
+msgid "This package includes the documentation for texlive-xetexfontinfo"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xhfill:texlive-xhfill-doc)
+#. summary(texlive-specs-y:texlive-xetexko)
#, fuzzy
-msgid "This package includes the documentation for texlive-xhfill"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#| msgid "Typesetting XML with TeX"
+msgid "Typeset Korean with Xe(La)TeX"
+msgstr "Zpracování XML pomocí TeXu"
-#. description(texlive-xifthen:texlive-xifthen-doc)
+#. description(texlive-specs-y:texlive-xetexko)
+msgid ""
+"The package supports typesetting Korean documents (including old Hangul texts), using XeTeX. It enhances the existing support, in XeTeX, providing features that provide quality typesetting.\n"
+"\n"
+"date: 2014-05-14 14:12:10 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetexko-doc)
+msgid "Documentation for texlive-xetexko"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xetexko-doc)
+msgid "This package includes the documentation for texlive-xetexko"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xetexref)
#, fuzzy
-msgid "This package includes the documentation for texlive-xifthen"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Reference documentation of XeTeX"
+msgstr "Dokumentace PHP v HTML"
-#. description(texlive-xint:texlive-xint-doc)
-msgid "This package includes the documentation for texlive-xint"
+#. description(texlive-specs-y:texlive-xetexref)
+msgid ""
+"The package comprises reference documentation for XeTeX detailing its extended features.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-xits:texlive-xits-doc)
+#. summary(texlive-specs-y:texlive-xevlna)
+msgid "Insert non-breakable spaces using XeTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xevlna)
+msgid ""
+"The package will directly insert nonbreakable spaces (in Czech, vlna or vlnka), after nonsyllabic prepositions and single letter conjuctions, while the document is being typeset. (The macros recognised maths and verbatim by TeX means.) (Inserting nonbreakable spaces by a preprocessor will probably never be fully reliable, because user defined macros and environments cannot reliably be recognised.) The package works both with (Plain) XeTeX and with XeLaTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xevlna-doc)
+msgid "Documentation for texlive-xevlna"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xevlna-doc)
+msgid "This package includes the documentation for texlive-xevlna"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xfor)
#, fuzzy
-msgid "This package includes the documentation for texlive-xits"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "A reimplementation of the LaTeX for-loop macro"
+msgstr "Svobodná implementace IEEE 802.1X protokolu"
-#. description(texlive-xkeyval:texlive-xkeyval-doc)
+#. description(texlive-specs-y:texlive-xfor)
+msgid ""
+"The package redefines the LaTeX internal \\@for macro so that the loop may be prematurely terminated. The action is akin to the C/Java break statement, except that the loop does not terminate until the end of the current iteration\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xfor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xkeyval"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xfor"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xlop:texlive-xlop-doc)
+#. description(texlive-specs-y:texlive-xfor-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xlop"
+msgid "This package includes the documentation for texlive-xfor"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xltxtra:texlive-xltxtra-doc)
+#. summary(texlive-specs-y:texlive-xgreek)
+msgid "XeLaTeX package for typesetting Greek language documents (beta release)"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xgreek)
+msgid ""
+"This package has been designed so to allow people to typeset Greek language documents using XeLaTeX. And it is released in the hope that people will use it and spot errors, bugs, features so to improve it. Practically, it provides all the capabilities of the greek option of the babel package. The package can be invoked with any of the following options: monotonic (for typesetting modern monotonic Greek), polytonic (for typesetting modern polytonic Greek), and ancient (for typesetting ancient texts). The default option is monotonic. The command \\setlanguage{<lang>} to activate the hyphenation patterns of the language <lang> This, however, can be done only if the format file has not been built with the babel mechanism.\n"
+"\n"
+"date: 2012-07-21 21:51:26 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xgreek-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xltxtra"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xgreek"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xmltex:texlive-xmltex-doc)
+#. description(texlive-specs-y:texlive-xgreek-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xmltex"
+msgid "This package includes the documentation for texlive-xgreek"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xmpincl:texlive-xmpincl-doc)
+#. summary(texlive-specs-y:texlive-xhfill)
+msgid "Extending \\hrulefill"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xhfill)
+msgid ""
+"The package provides extended macros for the default \\hrulefill command. It allows modification of the width and the colour of the line.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xhfill-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xmpincl"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xhfill"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xnewcommand:texlive-xnewcommand-doc)
+#. description(texlive-specs-y:texlive-xhfill-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xnewcommand"
+msgid "This package includes the documentation for texlive-xhfill"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xoptarg:texlive-xoptarg-doc)
+#. summary(texlive-specs-y:texlive-xifthen)
+msgid "Extended conditional commands"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xifthen)
+msgid ""
+"This package extends the ifthen package by implementing new commands to go within the first argument of \\ifthenelse: to test whether a string is void or not, if a command is defined or equivalent to another. The package also enables use of complex expressions as introduced by the package calc, together with the ability of defining new commands to handle complex tests. The package requires e-TeX features.\n"
+"\n"
+"date: 2012-06-08 15:44:30 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xifthen-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xoptarg"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xifthen"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xpatch:texlive-xpatch-doc)
+#. description(texlive-specs-y:texlive-xifthen-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xpatch"
+msgid "This package includes the documentation for texlive-xifthen"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xpeek:texlive-xpeek-doc)
-msgid "This package includes the documentation for texlive-xpeek"
+#. summary(texlive-specs-y:texlive-xii)
+#, fuzzy
+msgid "Christmas silliness"
+msgstr "Pohyblivá vánoční výzdoba kořenového okna"
+
+#. description(texlive-specs-y:texlive-xii)
+msgid ""
+"The xii package\n"
+"\n"
+"date: 2013-09-30 08:58:18 +0000"
msgstr ""
-#. description(texlive-xpicture:texlive-xpicture-doc)
-msgid "This package includes the documentation for texlive-xpicture"
+#. summary(texlive-specs-y:texlive-xint)
+msgid "Expandable operations on long numbers"
msgstr ""
-#. description(texlive-xpinyin:texlive-xpinyin-doc)
-msgid "This package includes the documentation for texlive-xpinyin"
+#. description(texlive-specs-y:texlive-xint)
+msgid ""
+"The bundle provides four packages: xint, which provides expandable TeX macros that implement the basic arithmetic operations of addition, subtraction, multiplication and division, as applied to arbitrarily long numbers represented as chains of digits with an optional minus sign; xinttools is loaded by xint (hence by all other packages of the bundle, too): it provides utilities of independent interest such as expandable and non-expandable loops. xintfrac, which computes fractions using xint; xintexpr, which extends xintfrac with an expandable parser of expressions involving integers and a wide variety of operators; xintbinhex provides conversions to and from binary and hexadecimal bases; xintseries, which provides basic functionality for computing partial sums using xint; xintgcd, which provides implementations of the Euclidean algorithm, and of its typesetting; xintcfrac, which deals with the computation of continued fractions, All of the packages' computations are done in a way th
at they can operate in an expanding environment. The packages may be used either with Plain TeX or LaTeX.\n"
+"\n"
+"date: 2014-04-01 18:36:20 +0000"
msgstr ""
-#. description(texlive-xpunctuate:texlive-xpunctuate-doc)
-msgid "This package includes the documentation for texlive-xpunctuate"
+#. summary(texlive-specs-y:texlive-xint-doc)
+msgid "Documentation for texlive-xint"
msgstr ""
-#. description(texlive-xq:texlive-xq-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xq"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-xint-doc)
+msgid "This package includes the documentation for texlive-xint"
+msgstr ""
-#. description(texlive-xskak:texlive-xskak-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xskak"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-xits)
+msgid "A Scientific Times-like font with support for mathematical typesetting"
+msgstr ""
-#. description(texlive-xstring:texlive-xstring-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xstring"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-xits)
+msgid ""
+"XITS is a Times-like font for scientific typesetting with proper mathematical support for modern, Unicode and OpenType capable TeX engines, namely LuaTeX and XeTeX. For use with LuaLaTeX or XeLaTeX, support is available from the fontspec and unicode-math packages.\n"
+"\n"
+"date: 2014-05-20 12:45:48 +0000"
+msgstr ""
-#. description(texlive-xtab:texlive-xtab-doc)
+#. summary(texlive-specs-y:texlive-xits-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xtab"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xits"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-xunicode:texlive-xunicode-doc)
+#. description(texlive-specs-y:texlive-xits-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-xunicode"
+msgid "This package includes the documentation for texlive-xits"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-xwatermark:texlive-xwatermark-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xwatermark"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-xits-fonts)
+msgid "Severed fonts for texlive-xits"
+msgstr ""
-#. description(texlive-xyling:texlive-xyling-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xyling"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-xits-fonts)
+msgid "The separated fonts package for texlive-xits"
+msgstr ""
-#. description(texlive-xypic:texlive-xypic-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xypic"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. summary(texlive-specs-y:texlive-xkeyval)
+msgid "Extension of the keyval package"
+msgstr ""
-#. description(texlive-xytree:texlive-xytree-doc)
-#, fuzzy
-msgid "This package includes the documentation for texlive-xytree"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+#. description(texlive-specs-y:texlive-xkeyval)
+msgid ""
+"This package is an extension of the keyval package and offers additional macros for setting keys and declaring and setting class or package options. The package allows the programmer to specify a prefix to the name of the macros it defines for keys, and to define families of key definitions; these all help use in documents where several packages define their own sets of keys.\n"
+"\n"
+"date: 2014-05-10 03:53:39 +0000"
+msgstr ""
-#. description(texlive-yafoot:texlive-yafoot-doc)
+#. summary(texlive-specs-y:texlive-xkeyval-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-yafoot"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xkeyval"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-yagusylo:texlive-yagusylo-doc)
+#. description(texlive-specs-y:texlive-xkeyval-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-yagusylo"
+msgid "This package includes the documentation for texlive-xkeyval"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-yannisgr:texlive-yannisgr-doc)
+#. summary(texlive-specs-y:texlive-xlop)
+msgid "Calculates and displays arithmetic operations"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xlop)
+msgid ""
+"Xlop (eXtra Large OPeration) will typeset arithmetic problems either in-line or \"as in school\" (using French school conventions). So for example, \\opadd{2}{3} can give either $2+3=5$ or something similar to: \\begin{tabular}{r} 2\\\\ +3\\\\ \\hline 5\\end{tabular}. Furthermore, numbers may be very large, e.g 200 figures (with a very long compilation time). Many other features allow to deal with numbers (tests, display, some high level operations, etc.)\n"
+"\n"
+"date: 2013-02-26 19:28:25 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xlop-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-yannisgr"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xlop"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-yax:texlive-yax-doc)
+#. description(texlive-specs-y:texlive-xlop-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-yax"
+msgid "This package includes the documentation for texlive-xlop"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-ydoc:texlive-ydoc-doc)
+#. summary(texlive-specs-y:texlive-xltxtra)
+msgid "\"Extras\" for LaTeX users of XeTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xltxtra)
+msgid ""
+"The package loads the fixltx2e package from the LaTeX distribution, and etex.sty from the e-TeX distribution. The package then patches the \\- (discretionary hyphen command) to use the current hyphen character (which may be different from than the default, which is the character at the ASCII hyphen slot), and loads the realscripts to patch the \\textsuperscript command (from the LaTeX kernel) and the \\textsubscript command (from the fixltx2e package). The package is loaded by the fontspec package, so that it should not ordinarily be necessary to load it explicitly. The package relies on the metalogo package for typesetting the XeTeX and XeLaTeX logos.\n"
+"\n"
+"date: 2012-03-06 13:36:12 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xltxtra-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ydoc"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xltxtra"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-yfonts:texlive-yfonts-doc)
+#. description(texlive-specs-y:texlive-xltxtra-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-yfonts"
+msgid "This package includes the documentation for texlive-xltxtra"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-yhmath:texlive-yhmath-doc)
+#. summary(texlive-specs-y:texlive-xmltex)
#, fuzzy
-msgid "This package includes the documentation for texlive-yhmath"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Support for parsing XML documents"
+msgstr "Rozšíření Perlu pro psaní XML dokumentů"
-#. description(texlive-york-thesis:texlive-york-thesis-doc)
+#. description(texlive-specs-y:texlive-xmltex)
+msgid ""
+"The package provides an implementation of a parser for documents matching the XML 1.0 and XML Namespace Recommendations. In addition to parsing commands are provided to attatch TeX typesetting instructions to the various markup elemenets as they are encounted. Sample files for typesetting a subset of TEI, MathML, are included. Element and Attribute names, as well as character data, may use any characters allowed in XML, using UTF-8 or a suitable 8-bit encoding.\n"
+"\n"
+"date: 2012-11-26 18:04:19 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xmltex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-york-thesis"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xmltex"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-youngtab:texlive-youngtab-doc)
+#. description(texlive-specs-y:texlive-xmltex-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-youngtab"
+msgid "This package includes the documentation for texlive-xmltex"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-yplan:texlive-yplan-doc)
+#. summary(texlive-specs-y:texlive-xmpincl)
+msgid "Include eXtensible Metadata Platform data in PDFLaTeX"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xmpincl)
+msgid ""
+"The XMP (eXtensible Metadata platform) is a framework to add metadata to digital material to enhance the workflow in publication. The essence is that the metadata is stored in an XML file, and this XML stream is then embedded in the file to which it applies. How you create this XML file is up to you, but the author started investigating this because he wanted to embed licensing information in the files he created. The license the author chose is one of the Creative Commons licenses, and their web-site offers this information in a valid XML-file, suitable for direct inclusion.\n"
+"\n"
+"date: 2012-11-14 17:32:01 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xmpincl-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-yplan"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xmpincl"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ytableau:texlive-ytableau-doc)
+#. description(texlive-specs-y:texlive-xmpincl-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ytableau"
+msgid "This package includes the documentation for texlive-xmpincl"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-zed-csp:texlive-zed-csp-doc)
+#. summary(texlive-specs-y:texlive-xnewcommand)
+msgid "Define \\global and \\protected commands with \\newcommand"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xnewcommand)
+msgid ""
+"The package provides the means of defining \\global and (e-TeX) \\protected commands, within the framework of LaTeX's standard \\newcommand.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xnewcommand-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-zed-csp"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xnewcommand"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-zhmetrics:texlive-zhmetrics-doc)
+#. description(texlive-specs-y:texlive-xnewcommand-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-zhmetrics"
+msgid "This package includes the documentation for texlive-xnewcommand"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-zhnumber:texlive-zhnumber-doc)
-msgid "This package includes the documentation for texlive-zhnumber"
+#. summary(texlive-specs-y:texlive-xoptarg)
+msgid "Expandable macros that take an optional argument"
msgstr ""
-#. description(texlive-zhspacing:texlive-zhspacing-doc)
+#. description(texlive-specs-y:texlive-xoptarg)
+msgid ""
+"Commands that take an optional argument are not ordinarily expandable; this package allows such commands to be expandable provided that they have at least one mandatory argument.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xoptarg-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-zhspacing"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xoptarg"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-ziffer:texlive-ziffer-doc)
+#. description(texlive-specs-y:texlive-xoptarg-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-ziffer"
+msgid "This package includes the documentation for texlive-xoptarg"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-zwgetfdate:texlive-zwgetfdate-doc)
+#. summary(texlive-specs-y:texlive-xpatch)
+msgid "Extending etoolbox patching commands"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xpatch)
+msgid ""
+"The package generalises the macro patching commands provided by Philipp Lehmann's etoolbox.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xpatch-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-zwgetfdate"
-msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+msgid "Documentation for texlive-xpatch"
+msgstr "Dokumentace pro adaptx"
-#. description(texlive-zwpagelayout:texlive-zwpagelayout-doc)
+#. description(texlive-specs-y:texlive-xpatch-doc)
#, fuzzy
-msgid "This package includes the documentation for texlive-zwpagelayout"
+msgid "This package includes the documentation for texlive-xpatch"
msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(texlive-zxjafbfont:texlive-zxjafbfont-doc)
-msgid "This package includes the documentation for texlive-zxjafbfont"
+#. summary(texlive-specs-y:texlive-xpeek)
+msgid "Define commands that peek ahead in the input stream"
msgstr ""
-#. description(texlive-zxjafont:texlive-zxjafont-doc)
-msgid "This package includes the documentation for texlive-zxjafont"
+#. description(texlive-specs-y:texlive-xpeek)
+msgid ""
+"The package provides tools to help define commands that, like \\xspace and the LaTeX command \\textit, peek at what follows them in the command stream and choose appropriate behaviour.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-zxjatype:texlive-zxjatype-doc)
-msgid "This package includes the documentation for texlive-zxjatype"
+#. summary(texlive-specs-y:texlive-xpeek-doc)
+msgid "Documentation for texlive-xpeek"
msgstr ""
-#. description(texlive-onlyamsmath)
-msgid ""
-"This package inhibits the usage of plain TeX and (on demand) of standard LaTeX mathematics environments. This is useful for class writers who want to encourage their users to use the environments provided by the amsmath package.\n"
-"\n"
-"date: 2012-01-02 13:24:13 +0000"
+#. description(texlive-specs-y:texlive-xpeek-doc)
+msgid "This package includes the documentation for texlive-xpeek"
msgstr ""
-#. description(texlive-photo)
+#. summary(texlive-specs-y:texlive-xpicture)
+msgid "Extensions of LaTeX picture drawing"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xpicture)
msgid ""
-"This package introduces a new float type called photo which works similar to the float types table and figure. Various options exist for placing photos, captions, and a \"photographer\" line. In twocolumn documents, a possibility exists to generate double-column floats automatically if the photo does not fit into one column. Photos do not have to be placed as floats, they can also be placed as boxes, with captions and photographer line still being available.\n"
+"The package extends the facilities of the pict2e and the curve2e packages, providing extra reference frames, conic section curves, graphs of elementary functions and other parametric curves.\n"
"\n"
-"date: 2006-12-02 14:26:11 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xorg-x11-libs)
-msgid "This package is a compatibility metapackage. It used to contain the X.Org libraries."
+#. summary(texlive-specs-y:texlive-xpicture-doc)
+msgid "Documentation for texlive-xpicture"
msgstr ""
-#. description(texlive-mtgreek)
-msgid ""
-"This package is an add-on to the MathTime a style to provide TeX support for the use of the MathTime(tm) fonts (formerly distributed by YandY, Inc.). The MathTime package has uppercase Greek letters hardwired to be upright and only upright; this package provides a switch to choose between the two kinds of Greek uppercase letters.\n"
-"\n"
-"date: 2010-04-21 21:25:04 +0000"
+#. description(texlive-specs-y:texlive-xpicture-doc)
+msgid "This package includes the documentation for texlive-xpicture"
msgstr ""
-#. description(texlive-xkeyval)
-msgid ""
-"This package is an extension of the keyval package and offers additional macros for setting keys and declaring and setting class or package options. The package allows the programmer to specify a prefix to the name of the macros it defines for keys, and to define families of key definitions; these all help use in documents where several packages define their own sets of keys.\n"
-"\n"
-"date: 2012-01-23 11:21:58 +0000"
+#. summary(texlive-specs-y:texlive-xpinyin)
+msgid "Automatically add pinyin to Chinese characters"
msgstr ""
-#. description(texlive-vertbars)
+#. description(texlive-specs-y:texlive-xpinyin)
msgid ""
-"This package is an extension to lineno, replacing that package's line numbers with bars to the left or right of the text.\n"
+"The package is written to simplify the input of Hanyu Pinyin. Macros are provided that automatically add pinyin to Chinese characters.\n"
"\n"
-"date: 2010-11-28 19:56:07 +0000"
+"date: 2014-05-18 06:21:32 +0000"
msgstr ""
-#. description(texlive-subdepth)
-msgid ""
-"This package is based on code (posted long ago to comp.text.tex by Donald Arseneau) to equalise the height of subscripts in maths. The default behaviour is to place subscripts slightly lower when there is a superscript as well, but this can look odd in some situations.\n"
-"\n"
-"date: 2008-08-23 20:26:13 +0000"
+#. summary(texlive-specs-y:texlive-xpinyin-doc)
+msgid "Documentation for texlive-xpinyin"
msgstr ""
-#. description(texlive-manuscript)
-msgid ""
-"This package is designed for those who have to submit dissertations, etc., to institutions that still maintain the typewriter is the summit of non-professional printing.\n"
-"\n"
-"date: 2010-03-14 22:46:18 +0000"
+#. description(texlive-specs-y:texlive-xpinyin-doc)
+msgid "This package includes the documentation for texlive-xpinyin"
msgstr ""
-#. description(texlive-register)
-msgid ""
-"This package is designed for typesetting the programmable elements in digital hardware, i.e., registers. Such registers typically have many fields and can be quite wide; they are thus a challenge to typeset in a consistent manner. Register is similar in some aspects to the bytefield package. Anyone doing hardware documentation using LaTeX should examine both packages. Register requires a fairly recent version of the float package. A Perl module and a Perl script are provided, to translate the register specifications into programmable data structures.\n"
-"\n"
-"date: 2011-01-19 21:37:08 +0000"
+#. summary(texlive-specs-y:texlive-xpunctuate)
+msgid "Process trailing punctuation which may be redundant"
msgstr ""
-#. description(texlive-mailing)
+#. description(texlive-specs-y:texlive-xpunctuate)
msgid ""
-"This package is for use when sending a large number of letters, all with the same body text. The package's \\addressfile command is used to specify who the letter's to be sent to; the body of the \\mailingtext command specifies the text of the letters, possibly using macros defined in the \\addressfile.\n"
+"The package provides commands that enable the user (or package writer) to insert punctuation after the macro. The method is similar to that of xspace, but goes further. The package provides the commands \\xperiod, \\xcomma and \\xperiodcomma, which follow a similar procedure to that of \\xspace, and insert punctuation if and only if it is necessary.\n"
"\n"
-"date: 2006-12-27 23:57:12 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-termcal)
-msgid ""
-"This package is intended to print a term calendar for use in planning a class. It has a flexible mechanism for specifying which days of the week are to be included and for inserting text either regularly on the same day each week, or on selected days, or for a series of consecutive days. It also has a flexible mechanism for specifing class and nonclass days. Text may be inserted into consecutive days so that it automatically flows around nonclass days.\n"
-"\n"
-"date: 2011-05-16 23:53:44 +0000"
+#. summary(texlive-specs-y:texlive-xpunctuate-doc)
+msgid "Documentation for texlive-xpunctuate"
msgstr ""
-#. description(texlive-lsc)
-msgid ""
-"This package is similar to the msc package in that it provides macros for typesetting a variant of sequence diagrams, in this case the Live Sequence Charts of Damm and Harel. The package supports the full LSC language of the original LSC paper, the Klose-extensions for formal verification and some of the Harel- extensions for the Play-In/Play-Out approach (cf. the manual).\n"
-"\n"
-"date: 2007-03-09 11:50:50 +0000"
+#. description(texlive-specs-y:texlive-xpunctuate-doc)
+msgid "This package includes the documentation for texlive-xpunctuate"
msgstr ""
-#. description(texlive-pl)
-msgid ""
-"This package is the Polish extension of the Computer Modern fonts (known as PL fonts),in Adobe Type 1 (PostScript) format. The fonts use the same .tfm files as for the version generated by MetaFont. This release of fonts was adapted to the (mostly guessed) demands of the Windows environment, while keeping the fonts usable with TeX; however, encoding files are now added, as Windows and TeX use different encoding schemes.\n"
-"\n"
-"date: 2009-10-07 19:35:42 +0000"
+#. summary(texlive-specs-y:texlive-xq)
+msgid "Support for writing about xiangqi"
msgstr ""
-#. description(texlive-ifmslide)
+#. description(texlive-specs-y:texlive-xq)
msgid ""
-"This package is used to produce printed slides with latex and online presentations with pdflatex. It is provided by the 'Institute of Mechanics' (ifm) Univ. of Technology Darmstadt, Germany. It is based on ideas of pdfslide, but completely rewritten for compatibility with texpower and seminar. The manual describes all functions and provides a sample.\n"
+"The package is for writing about xiangqi or chinese chess. You can write games or parts of games and show diagrams with special positions.\n"
"\n"
-"date: 2010-12-13 23:15:57 +0000"
+"date: 2012-07-21 19:15:07 +0000"
msgstr ""
-#. description(texlive-svn-multi)
-msgid ""
-"This package lets you typeset keywords of the version control system Subversion inside your LaTeX files anywhere you like. Unlike the otherwise similar package svn the use of multiple files for one LaTeX document is well supported. The package uses the author's filehook and currfile packages. The package interacts with an external Perl script, to retrieve information necessary for the required output.\n"
-"\n"
-"date: 2012-05-07 13:25:51 +0000"
+#. summary(texlive-specs-y:texlive-xq-doc)
+#, fuzzy
+msgid "Documentation for texlive-xq"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xq-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xq"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xskak)
+msgid "An extension to the skak package for chess typesetting"
msgstr ""
-#. description(texlive-skaknew)
+#. description(texlive-specs-y:texlive-xskak)
msgid ""
-"This package offers Adobe Type 1 versions of the fonts provided as MetaFont source by the skak bundle.\n"
+"Xskak, as its prime function, saves information about a chess game for later use (e.g., to loop through a game to make an animated board). The package also extends the input that the parsing commands can handle and offers an interface to define and switch between indefinite levels of styles.\n"
"\n"
-"date: 2009-02-21 21:13:29 +0000"
+"date: 2014-04-21 11:18:36 +0000"
msgstr ""
-#. description(texlive-tablists)
-msgid ""
-"This package offers environments and commands for one-level and two-level lists of short items (e.g., exercises in textbooks). The environments support optional arguments of item numbering similar to the enumerate or paralist packages.\n"
-"\n"
-"date: 2009-08-04 20:17:36 +0000"
+#. summary(texlive-specs-y:texlive-xskak-doc)
+#, fuzzy
+msgid "Documentation for texlive-xskak"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xskak-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xskak"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xstring)
+msgid "String manipulation for (La)TeX"
msgstr ""
-#. description(texlive-layaureo)
+#. description(texlive-specs-y:texlive-xstring)
msgid ""
-"This package produces a wide page layout for documents that use A4 paper size. Moreover, LayAureo provides both a simple hook for leaving an empty space which is required if pages are bundled by a press binding use option binding=length), and an option called big which it forces typearea to become maximum.\n"
+"The package provides macros for manipulating strings -- testing a string's contents, extracting substrings, substitution of substrings and providing numbers such as string length, position of, or number of recurrences of, a substring. The package works equally in Plain TeX and LaTeX (though e-TeX is always required). The strings to be processed may contain (expandable) macros.\n"
"\n"
-"date: 2006-12-30 09:59:01 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-procIAGssymp)
-msgid ""
-"This package provides (re-)definitions of some LaTeX commands that can be useful for the preparation of a paper with the style of the proceeding of symposia sponsored by the 'International Association of Geodesy (IAG)' published by Springer-Verlag.\n"
-"\n"
-"date: 2007-01-06 20:10:04 +0000"
+#. summary(texlive-specs-y:texlive-xstring-doc)
+#, fuzzy
+msgid "Documentation for texlive-xstring"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xstring-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xstring"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xtab)
+msgid "Break tables across pages"
msgstr ""
-#. description(texlive-verbatimcopy)
+#. description(texlive-specs-y:texlive-xtab)
msgid ""
-"This package provides \\VerbatimCopy{in}{out} that will enable LaTeX to take a verbatim copy of one text file, and save it under another name. The package provides a means to specify the output directory to be used, but does no checking and may therefore overwrite an important file if used injudiciously.\n"
+"Xtab is an extended and somewhat improved version of supertabular; its xtabular environment provides tables that break across pages.\n"
"\n"
-"date: 2009-06-02 12:54:30 +0000"
+"date: 2013-09-03 15:01:13 +0000"
msgstr ""
-#. description(texlive-jvlisting)
-msgid ""
-"This package provides a LaTeX environment listing, an alternative to the built-in verbatim environment. The listing environment is tailored for including listings of computer program source code into documents. The main advantages over the original verbatim environment are: - environments automatically fixes leading whitespace so that the environment and program listing can be indented with the rest of the document source, and; - listing environments may easily be customised and extended.\n"
-"\n"
-"date: 2011-11-18 00:15:46 +0000"
+#. summary(texlive-specs-y:texlive-xtab-doc)
+#, fuzzy
+msgid "Documentation for texlive-xtab"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xtab-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xtab"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xunicode)
+msgid "Generate Unicode characters from accented glyphs"
msgstr ""
-#. description(texlive-uaclasses)
+#. description(texlive-specs-y:texlive-xunicode)
msgid ""
-"This package provides a LaTeX2e document class named 'ua- thesis' for typesetting theses and dissertations in the official format required by the University of Arizona. Moreover, there is a fully compatible alternative document class 'my-thesis' for private 'nice' copies of the dissertation, and the respective title pages are available as separate packages to work with any document class.\n"
+"The package supports XeTeX's (and other putative future similar engines') need for Unicode characters, in a similar way to what the fontenc does for 8-bit (and the like) fonts: convert accent-glyph sequence to a single Unicode character for output. The package also covers glyphs specified by packages (such as tipa) which define many commands for single text glyphs.\n"
"\n"
-"date: 2009-01-05 21:46:04 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-warning)
-msgid ""
-"This package provides a command that generates a list of warnings that are printed out at the very end of the logfile. This is useful for warnings such as 'Rerun for this or that reason' or 'This is a draft, change it before the final run'.\n"
-"\n"
-"date: 2011-04-08 15:41:44 +0000"
+#. summary(texlive-specs-y:texlive-xunicode-doc)
+#, fuzzy
+msgid "Documentation for texlive-xunicode"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xunicode-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xunicode"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xwatermark)
+msgid "Graphics and text watermarks on selected pages"
msgstr ""
-#. description(texlive-polyglossia)
+#. description(texlive-specs-y:texlive-xwatermark)
msgid ""
-"This package provides a complete Babel replacement for users of LuaLaTeX and XeLaTeX; it relies on the fontspec package, version 2.0 at least. This is the first release that supports use with LuaLaTeX; it should be considered \"transitional\" in that role.\n"
+"The package extends the author's draftmark and the watermark packages.\n"
"\n"
-"date: 2013-05-28 16:20:04 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-lazylist)
+#. summary(texlive-specs-y:texlive-xwatermark-doc)
+#, fuzzy
+msgid "Documentation for texlive-xwatermark"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xwatermark-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xwatermark"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xyling)
+msgid "Draw syntactic trees, etc., for linguistics literature, using xy-pic"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xyling)
msgid ""
-"This package provides a pile of lambda-calculus and list- handling macros of an incredibly obtuse nature. The TUGboat paper serves as a manual for the macros. This TeX code was formally verified.\n"
+"The macros in this package model the construction of linguistic tree structures as a genuinely graphical problem: they contain two types of objects, BRANCHES and NODE LABELS, and these are positioned relative to a GRID. It is essential that each of these three elements is constructed independent of the other two, and hence they can be modified without unwanted side effects. The macros are based on the xy-pic package.\n"
"\n"
-"date: 2006-12-30 09:59:01 +0000"
+"date: 2012-06-08 08:58:36 +0000"
msgstr ""
-#. description(texlive-nowidow)
+#. summary(texlive-specs-y:texlive-xyling-doc)
+#, fuzzy
+msgid "Documentation for texlive-xyling"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xyling-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xyling"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xymtex)
+#, fuzzy
+#| msgid "Typesetting XML with TeX"
+msgid "Typesetting chemical structures"
+msgstr "Zpracování XML pomocí TeXu"
+
+#. description(texlive-specs-y:texlive-xymtex)
msgid ""
-"This package provides a useful macro to manage widow lines.\n"
+"XyMTeX is a set of packages for drawing a wide variety of chemical structural formulas in a way that reflects their structure. The package provides three output modes: 'LaTeX', 'PostScript' and 'PDF'. XyMTeX's commands have a systematic set of arguments for specifying substituents and their positions, endocyclic double bonds, and bond patterns. In some cases there are additional arguments for specifying hetero-atoms on the vertices of heterocycles. It is believed that this systematic design allows XyMTeX to operate as a practical (device- independent) tool for use with LaTeX.\n"
"\n"
-"date: 2011-09-21 20:10:12 +0000"
+"date: 2013-11-19 13:03:04 +0000"
msgstr ""
-#. description(texlive-showexpl)
+#. summary(texlive-specs-y:texlive-xymtex-doc)
+#, fuzzy
+msgid "Documentation for texlive-xymtex"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xymtex-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xymtex"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xypic)
+msgid "Flexible diagramming macros"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xypic)
msgid ""
-"This package provides a way to typeset LaTeX source code and the related result in the same document.\n"
+"A package for typesetting a variety of graphs and diagrams with TeX. Xy-pic works with most formats (including LaTeX, AMS- LaTeX, AMS-TeX, and plain TeX). The distribution includes Michael Barr's diag package, which was previously distributed stand-alone.\n"
"\n"
-"date: 2013-04-10 08:08:31 +0000"
+"date: 2013-10-06 17:55:25 +0000"
msgstr ""
-#. description(texlive-pdfcprot)
+#. summary(texlive-specs-y:texlive-xypic-doc)
+#, fuzzy
+msgid "Documentation for texlive-xypic"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xypic-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xypic"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-y:texlive-xypic-fonts)
+msgid "Severed fonts for texlive-xypic"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xypic-fonts)
+msgid "The separated fonts package for texlive-xypic"
+msgstr ""
+
+#. summary(texlive-specs-y:texlive-xypic-tut-pt)
+msgid "A tutorial for XY-pic, in Portuguese"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xypic-tut-pt)
msgid ""
-"This package provides an easy interface to adjust the character protrusion for different fonts and choosing the right adjustment automatically depending on the font.\n"
+"The xypic-tut-pt package\n"
"\n"
-"date: 2006-12-18 22:50:36 +0000"
+"date: 2012-06-08 08:58:36 +0000"
msgstr ""
-#. description(texlive-koma-moderncvclassic)
+#. summary(texlive-specs-y:texlive-xytree)
+msgid "Tree macros using XY-Pic"
+msgstr ""
+
+#. description(texlive-specs-y:texlive-xytree)
msgid ""
-"This package provides an imitation of the moderncv class with the classic style (by Xavier Danaux), to be used in conjunction with the koma-classes. Thus it is possible to configure pagelayout, headings etc. the way it is done in koma-classes. Moreover, it is possible to use biblatex, while the original moderncv-class is incompatible with biblatex.\n"
+"The package provides means to draw linguistic syntactic trees with ease and to support hopefully sufficient functionalities, that the linguist may need. The package (of course) depends on the XY-Pic package.\n"
"\n"
-"date: 2012-01-05 00:27:26 +0000"
+"date: 2012-02-10 17:28:55 +0000"
msgstr ""
-#. description(texlive-xmltex)
+#. summary(texlive-specs-y:texlive-xytree-doc)
+#, fuzzy
+msgid "Documentation for texlive-xytree"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-y:texlive-xytree-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-xytree"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yafoot)
+msgid "A bundle of miscellaneous footnote packages"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-yafoot)
msgid ""
-"This package provides an implementation of a parser for documents matching the XML 1.0 and XML Namespace Recommendations. In addition to parsing commands are provided to attatch TeX typesetting instructions to the various markup elemenets as they are encounted. Sample files for typesetting a subset of TEI, MathML, are included. Element and Attribute names, as well as character data, may use any characters allowed in XML, using UTF-8 or a suitable 8-bit encoding.\n"
+"Contains three packages: - pfnote to number footnotes per page;\n"
+"- fnpos to control the position of footnotes; and - dblfnote to make footnotes double-columned.\n"
"\n"
-"date: 2012-06-08 06:33:19 +0000"
+"date: 2011-11-05 19:23:42 +0000"
msgstr ""
-#. description(texlive-tikz-timing)
+#. summary(texlive-specs-z:texlive-yafoot-doc)
+#, fuzzy
+msgid "Documentation for texlive-yafoot"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-yafoot-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yafoot"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yagusylo)
+msgid "A symbol loader"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-yagusylo)
msgid ""
-"This package provides macros and an environment to generate timing diagrams (digital waveforms) without much effort. The TikZ package is used to produce the graphics. The diagrams may be inserted into text (paragraphs, \\hbox, etc.) and into tikzpictures. A tabular-like environment is provided to produce larger timing diagrams.\n"
+"The name is by way of being an acronym for \"Yet Another Grand Unified Symbols Loader\"... The package allows the user to access a symbol without loading the package that usually provides it; this has the advantage of avoiding the name clashes that so commonly trouble those who load symbol- packages.\n"
"\n"
-"date: 2011-01-09 22:18:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-skak)
+#. summary(texlive-specs-z:texlive-yagusylo-doc)
+#, fuzzy
+msgid "Documentation for texlive-yagusylo"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-yagusylo-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yagusylo"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yannisgr)
+msgid "Greek fonts by Yannis Haralambous"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-yannisgr)
msgid ""
-"This package provides macros and fonts in MetaFont format which can be used to typeset chess games using PGN, and to show diagrams of the current board in a document. The package builds on work by Piet Tutelaers -- the main novelty is the use of PGN for input instead of the more cumbersome coordinate notation (g1f3 becomes the more readable Nf3 in PGN). An Adobe Type 1 implementation of skak's fonts is available as package skaknew; an alternative chess notational scheme is available in package texmate, and a general mechanism for selecting chess fonts is provided in chessfss.\n"
+"A family of 7-bit fonts with a code table designed for setting modern polytonic Greek. The fonts are provided as Metafont source; macros to produce a Greek variant of Plain TeX (including a hyphenation table adapted to the fonts' code table) are provided.\n"
"\n"
-"date: 2008-10-16 12:41:43 +0000"
+"date: 2014-04-28 15:48:37 +0000"
msgstr ""
-#. description(texlive-modroman)
+#. summary(texlive-specs-z:texlive-yannisgr-doc)
+#, fuzzy
+msgid "Documentation for texlive-yannisgr"
+msgstr "Dokumentace pro castor"
+
+#. description(texlive-specs-z:texlive-yannisgr-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yannisgr"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yax)
+#, fuzzy
+#| msgid "Yet Another Pager Software"
+msgid "Yet Another Key System"
+msgstr "Další program pro pager"
+
+#. description(texlive-specs-z:texlive-yax)
msgid ""
-"This package provides only two macros viz. \\modromannumeral which writes the number given as argument in lower case roman numeral with a 'j' instead of a 'i' as the final letter of numbers greater than 1 and \\modroman{MyCounter} which writes the value of a counter in the same way. You use the first in the same way as the TeX primitive \\romannumeral and the second as LaTeX command \\roman. The default option is 'vpourv' with which 5 is 'translated' as 'v' and option 'upourv' whith which the same 5 is given as 'u'.\n"
+"YaX is advertised as a key system, but it rather organizes attributes in parameters, which parameters can be executed, so that YaX is halfway between key management and macro definition (and actually hopes to provide a user's interface). Values assigned to attributes can be retrieved and tested in various ways, with full expandability ensured as much as possible. Finally, YaX's syntax is a quite peculiar (as few braces as possible), but may be customized. YaX is based on texapi and thus requires e-TeX.\n"
"\n"
-"date: 2012-07-07 20:27:26 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-spotcolor)
+#. summary(texlive-specs-z:texlive-yax-doc)
+#, fuzzy
+msgid "Documentation for texlive-yax"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-yax-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yax"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-ydoc)
+msgid "Macros for documentation of LaTeX classes and packages"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-ydoc)
msgid ""
-"This package provides procedures for using spot colors in LaTeX documents and the generated pdf files. Predefined templates for PANTONE and HKS color spaces are included but new ones can easily be defined.\n"
+"The package provides macros and environments to document LaTeX packages and classes. It is an (as yet unfinished) alternative to the ltxdoc class and the doc or xdoc packages. The aim is to provide a different layout and more modern styles (using the xcolor, hyperref packages, etc.) This is an alpha release, and should probably not (yet) be used with other packages, since the implementation might change. Nevertheless, the author uses it to document his own packages.\n"
"\n"
-"date: 2007-03-12 10:51:09 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-mongolian-babel)
+#. summary(texlive-specs-z:texlive-ydoc-doc)
+#, fuzzy
+msgid "Documentation for texlive-ydoc"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-ydoc-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ydoc"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yfonts)
+#, fuzzy
+msgid "Support for old German fonts"
+msgstr "XML podpora pro castor"
+
+#. description(texlive-specs-z:texlive-yfonts)
msgid ""
-"This package provides support for Mongolian in a Cyrillic alphabet. (The work derives from the earlier Russian work for babel.)\n"
+"A LaTeX interface to the old-german fonts designed by Yannis Haralambous: Gothic, Schwabacher, Fraktur and the baroque initials.\n"
"\n"
-"date: 2010-06-07 23:06:42 +0000"
+"date: 2014-05-20 12:46:50 +0000"
msgstr ""
-#. description(texlive-isodate)
+#. summary(texlive-specs-z:texlive-yfonts-doc)
+#, fuzzy
+msgid "Documentation for texlive-yfonts"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-yfonts-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yfonts"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yhmath)
+#, fuzzy
+msgid "Extended maths fonts for LaTeX"
+msgstr "Zpracování témat pro GTK+"
+
+#. description(texlive-specs-z:texlive-yhmath)
msgid ""
-"This package provides ten output formats of the commands \\today, \\printdate, \\printdateTeX, and \\daterange (partly language dependent). Formats available are: ISO (yyyy-mm-dd), numeric (e.g. dd.\\,mm.~yyyy), short (e.g. dd.\\,mm.\\,yy), TeX (yyyy/mm/dd), original (e.g. dd. mmm yyyy), short original (e.g. dd. mmm yy), as well as numerical formats with Roman numerals for the month. The commands \\printdate and \\printdateTeX print any date. The command \\daterange prints a date range and leaves out unnecessary year or month entries. This package supports German (old and new rules), Austrian, US English, British English, French, Danish, Swedish, and Norwegian.\n"
+"The yhmath bundle contains fonts (in type 1 format) and a LaTeX package for using them.\n"
"\n"
-"date: 2006-12-08 13:34:19 +0000"
+"date: 2014-04-28 15:48:37 +0000"
msgstr ""
-#. description(texlive-marginnote)
+#. summary(texlive-specs-z:texlive-yhmath-doc)
+#, fuzzy
+msgid "Documentation for texlive-yhmath"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-yhmath-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yhmath"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yhmath-fonts)
+msgid "Severed fonts for texlive-yhmath"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-yhmath-fonts)
+msgid "The separated fonts package for texlive-yhmath"
+msgstr ""
+
+#. summary(texlive-specs-z:texlive-york-thesis)
+msgid "A thesis class file for York University, Toronto"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-york-thesis)
msgid ""
-"This package provides the command \\marginnote that may be used instead of \\marginpar at almost every place where \\marginpar cannot be used, e.g., inside floats, footnotes, or in frames made with the framed package.\n"
+"York Graduate Studies has again changed the requirements for theses and dissertations. The established york-thesis class file now implements the changes made in Spring 2005.\n"
"\n"
-"date: 2012-04-08 14:44:52 +0000"
+"date: 2012-02-09 16:36:54 +0000"
msgstr ""
-#. description(texlive-pagecolor)
+#. summary(texlive-specs-z:texlive-york-thesis-doc)
+#, fuzzy
+msgid "Documentation for texlive-york-thesis"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-york-thesis-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-york-thesis"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-youngtab)
+msgid "Typeset Young-Tableaux"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-youngtab)
msgid ""
-"This package provides the command \\thepagecolor, which gives the current page (background) colour, i. e. the argument used with the most recent call of \\pagecolor{...}. The command \\thepagecolornone gives the same colour as \\thepagecolor, except when the page background colour is \"none\" (e.g., as a result of using the \\nopagecolor command). In that case \\thepagecolor is \"white\" and \\thepagecolornone is \"none\".\n"
+"A package for typesetting Young-Tableaux, mathematical symbols for the representations of groups, providing two macros, \\yng(1) and \\young(1) to generate the whole Young-Tableaux.\n"
"\n"
-"date: 2012-02-24 12:31:20 +0000"
+"date: 2012-04-16 10:07:42 +0000"
msgstr ""
-#. description(tumbler:tumbler-doc)
-msgid "This package provides the developer documentation for tumbler."
+#. summary(texlive-specs-z:texlive-youngtab-doc)
+#, fuzzy
+msgid "Documentation for texlive-youngtab"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-youngtab-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-youngtab"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-yplan)
+msgid "Daily planner type calendar"
msgstr ""
-#. description(texlive-pseudocode)
+#. description(texlive-specs-z:texlive-yplan)
msgid ""
-"This package provides the environment \"pseudocode\" for describing algorithms in a natural manner.\n"
+"Prints two six-monthly vertical-type daily planner (i.e., months along the top, days downwards), with each 6-month period fitting onto a single A4 (or US letter) sheet. The package offers support for English, French, German, Spanish and Portuguese. The previous scheme of annual updates has now been abandoned, in favour of a Perl script yplan that generates a year's planner automatically. (The last manually-generated LaTeX file remains on the archive.)\n"
"\n"
-"date: 2009-03-02 12:24:03 +0000"
+"date: 2012-04-16 10:15:05 +0000"
msgstr ""
-#. description(xfce4-branding-openSUSE:xfwm4-branding-openSUSE)
-msgid "This package provides the openSUSE look and feel for the xfwm4 window manager."
-msgstr ""
+#. summary(texlive-specs-z:texlive-yplan-doc)
+#, fuzzy
+msgid "Documentation for texlive-yplan"
+msgstr "Dokumentace pro adaptx"
-#. description(thunar-volman:thunar-volman-branding-upstream)
-msgid "This package provides the upstream look and feel for the Thunar Volume Manager."
+#. description(texlive-specs-z:texlive-yplan-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-yplan"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-ytableau)
+msgid "Many-featured Young tableaux and Young diagrams"
msgstr ""
-#. description(xfdesktop:xfdesktop-branding-upstream)
-msgid "This package provides the upstream look and feel for the Xfce Desktop Manager."
+#. description(texlive-specs-z:texlive-ytableau)
+msgid ""
+"The package provides several functions for drawing Young tableaux and Young diagrams, extending the young and youngtab packages but providing lots more features. Skew and coloured tableaux are easy, and pgfkeys-enabled options are provided both at package load and configurably.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xfce4-notifyd:xfce4-notifyd-branding-upstream)
-msgid "This package provides the upstream look and feel for the Xfce Notification Daemon."
+#. summary(texlive-specs-z:texlive-ytableau-doc)
+#, fuzzy
+msgid "Documentation for texlive-ytableau"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-ytableau-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ytableau"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-zapfchan-fonts)
+msgid "Severed fonts for texlive-zapfchan"
msgstr ""
-#. description(xfce4-session:xfce4-session-branding-upstream)
-msgid "This package provides the upstream look and feel for the Xfce Session Manager."
+#. description(texlive-specs-z:texlive-zapfchan-fonts)
+msgid "The separated fonts package for texlive-zapfchan"
msgstr ""
-#. description(xfwm4:xfwm4-branding-upstream)
-msgid "This package provides the upstream look and feel for the xfwm4 window manager."
+#. summary(texlive-specs-z:texlive-zapfding-fonts)
+msgid "Severed fonts for texlive-zapfding"
msgstr ""
-#. description(xfce4-panel:xfce4-panel-branding-upstream)
-msgid "This package provides the upstream look and feel for xfce4-panel."
+#. description(texlive-specs-z:texlive-zapfding-fonts)
+msgid "The separated fonts package for texlive-zapfding"
msgstr ""
-#. description(xfce4-settings:xfce4-settings-branding-upstream)
-msgid "This package provides the upstream look and feel for xfce4-settings."
+#. summary(texlive-specs-z:texlive-zed-csp)
+msgid "Typesetting Z and CSP format specifications"
msgstr ""
-#. description(texlive-jurarsp)
+#. description(texlive-specs-z:texlive-zed-csp)
msgid ""
-"This package should be helpful for people working on (German) law. It (ab)uses BibTeX for citations of judgements and official documents. For this purpose, a special BibTeX-style is provided.\n"
+"The package supports real-time CSP and incorporates the functionality of Spivey's original Z package, written for LaTeX 2.09.\n"
"\n"
-"date: 2007-01-08 13:12:54 +0000"
+"date: 2012-03-30 13:19:52 +0000"
msgstr ""
-#. description(texlive-juraabbrev)
-msgid ""
-"This package should be helpful for people working on (German) law. It helps you to handle abbreviations and creates a list of those (pre-defined) abbreviations that have actually been used in the document\n"
-"\n"
-"date: 2007-01-08 13:12:54 +0000"
+#. summary(texlive-specs-z:texlive-zed-csp-doc)
+#, fuzzy
+msgid "Documentation for texlive-zed-csp"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-zed-csp-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-zed-csp"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-zhmetrics)
+msgid "TFM subfont files for using Chinese fonts in 8-bit TeX"
msgstr ""
-#. description(texlive-pdfpages)
+#. description(texlive-specs-z:texlive-zhmetrics)
msgid ""
-"This package simplifies the inclusion of external multi-page PDF documents in LaTeX documents. Pages may be freely selected and similar to psnup it is possible to put several logical pages onto each sheet of paper. Furthermore a lot of hypertext features like hyperlinks and article threads are provided. The package supports pdfTeX (pdflatex) and VTeX. With VTeX it is even possible to use this package to insert PostScript files, in addition to PDF files.\n"
+"These are metrics to use existing Chinese TrueType fonts in workflows that use LaTeX & dvipdfmx, or pdfLaTeX. The fonts themselves are not included in the package. Six font families are supported: kai, song, lishu, fangsong, youyuan and hei. Two encodings (GBK and UTF-8) are supported.\n"
"\n"
-"date: 2012-08-31 17:14:38 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-makecell)
-msgid ""
-"This package supports common layouts for tabular column heads in whole documents, based on one-column tabular environment. In addition, it can create multi-lined tabular cells. The Package also offers: -- a macro which changes the vertical space around all the cells in a tabular environment (similar to the function of the tabls package, but using the facilities of the array); -\n"
-"- macros for multirow cells, which use the facilities of the multirow package; -- macros to number rows in tables, or to skip cells; -- diagonally divided cells; and -- horizontal lines in tabular environments with defined thickness.\n"
-"\n"
-"date: 2009-09-06 23:31:27 +0000"
+#. summary(texlive-specs-z:texlive-zhmetrics-doc)
+#, fuzzy
+msgid "Documentation for texlive-zhmetrics"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-zhmetrics-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-zhmetrics"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-zhnumber)
+msgid "Typeset Chinese representations of numbers"
msgstr ""
-#. description(texlive-semioneside)
+#. description(texlive-specs-z:texlive-zhnumber)
msgid ""
-"This package supports the preparation of semi one sided documents. That is, two sided documents, where all text is output on right-hand pages--as in a one-sided documents--and only special contents are output on left-hand pages on user request, e.g., floating objects.\n"
+"The package provides commands to typeset Chinese representations of numbers. The main difference between this package and CJKnumb is that the commands provided are expandable in the 'proper' way.\n"
"\n"
-"date: 2007-02-26 20:24:31 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-SIstyle)
-msgid ""
-"This package typesets SI units, numbers and angles according to the ISO requirements. Care is taken with font setup and requirements, and language customisation is available. Note that this package is (in principle) superseded by siunitx; sistyle has maintenance-only support, now.\n"
-"\n"
-"date: 2008-07-16 14:54:56 +0000"
+#. summary(texlive-specs-z:texlive-zhnumber-doc)
+msgid "Documentation for texlive-zhnumber"
msgstr ""
-#. description(texlive-ifplatform)
-msgid ""
-"This package uses the (La)TeX extension -shell-escape to establish whether the document is being processed on a Windows or on a Unix-like system (Mac OS X, Linux, etc.), or on Cygwin (Unix environment over a windows system). Booleans provided are: - \\ifwindows, - \\iflinux, - \\ifmacosx and - \\ifcygwin. The package also preserves the output of uname on a Unix-like system, which may be used to distinguish between various classes of Unix systems.\n"
-"\n"
-"date: 2009-09-10 15:35:10 +0000"
+#. description(texlive-specs-z:texlive-zhnumber-doc)
+msgid "This package includes the documentation for texlive-zhnumber"
msgstr ""
-#. description(texlive-pict2e)
-msgid ""
-"This package was described in the 2nd edition of 'LaTeX: A Document Preparation System', but the LaTeX project team declined to produce the package. For a long time, LaTeX has included a 'pict2e package' that merely produced an apologetic error message. The new package extends the existing LaTeX picture environment, using the familiar technique (cf. the graphics and color packages) of driver files (at present, drivers for PostScript output from LaTeX, and for use with PDFLaTeX are available). The package documentation has a fair number of examples of use, showing where things are improved by comparison with the LaTeX picture environment.\n"
-"\n"
-"date: 2013-01-08 21:57:06 +0000"
+#. summary(texlive-specs-z:texlive-zhspacing)
+msgid "Spacing for mixed CJK-English documents in XeTeX"
msgstr ""
-#. description(texlive-zwpagelayout)
+#. description(texlive-specs-z:texlive-zhspacing)
msgid ""
-"This package was developed as a typographers' toolbox offering important basic features for everyday work. It allows setting the paper size and the page layout; it can print crop marks; and it can reflect pages both horizontally and vertically. The package facilities work with TeX + dvips or (x)dvipdfm(x), and with pdfTeX.\n"
+"The package manages spacing in a CJK document; between consecutive Chinese letters, spaces are ignored, but a consistent space is inserted between Chinese text and English (or mathematics). The package may be used by any document format under XeTeX.\n"
"\n"
-"date: 2013-01-15 08:51:57 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(texlive-newpx)
+#. summary(texlive-specs-z:texlive-zhspacing-doc)
+#, fuzzy
+msgid "Documentation for texlive-zhspacing"
+msgstr "Dokumentace pro adaptx"
+
+#. description(texlive-specs-z:texlive-zhspacing-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-zhspacing"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(texlive-specs-z:texlive-ziffer)
+msgid "Conversion of punctuation in maths mode"
+msgstr ""
+
+#. description(texlive-specs-z:texlive-ziffer)
msgid ""
-"This package, based on pxfonts, provides many fixes and enhancements to that package, splitting it in two parts - newpxtext and newpxmath - which may be run independently of one another. It provides scaling, improved metrics, and other options. For proper operation, the packages require that the packages newtxmath and pxfonts be installed and their map files enabled.\n"
+"The package modifies the behaviour of characters in maths mode so that: '.' is used as a one-thousand separator (as is common in Germany) ',' is used as a decimal separator (as is common in Germany) '--' is represented with spacing as appropriate to such constructs as '1.000,--'. These conversions may be switched on and off.\n"
"\n"
-"date: 2013-05-27 18:07:27 +0000"
+"date: 2012-05-09 16:20:59 +0000"
msgstr ""
-#. description(yum-utils:yum-allowdowngrade)
-msgid "This plugin adds a --allow-downgrade flag to yum to make it possible to manually downgrade packages to specific versions."
-msgstr ""
+#. summary(texlive-specs-z:texlive-ziffer-doc)
+#, fuzzy
+msgid "Documentation for texlive-ziffer"
+msgstr "Dokumentace pro adaptx"
-#. description(yum-utils:yum-downloadonly)
-msgid "This plugin adds a --downloadonly flag to yum so that yum will only download the packages and not install/update them."
-msgstr ""
+#. description(texlive-specs-z:texlive-ziffer-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-ziffer"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(yum-utils:yum-changelog)
-msgid "This plugin adds a command line option to allow viewing package changelog deltas before or after updating packages."
-msgstr ""
+#. summary(texlive-specs-z:texlive-zlmtt)
+#, fuzzy
+msgid "Use Latin Modern Typewriter fonts"
+msgstr "Užitečné fonty"
-#. description(yum-utils:yum-aliases)
-msgid "This plugin adds the command alias, and parses the aliases config. file to enable aliases."
+#. description(texlive-specs-z:texlive-zlmtt)
+msgid ""
+"The package allows selection of Latin Modern Typewriter fonts with scaling and access to all its features. The package requires the mweights package.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(yum-utils:yum-list-data)
-msgid "This plugin adds the commands list- vendors, groups, packagers, licenses, arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and installed-sizes."
-msgstr ""
+#. summary(texlive-specs-z:texlive-zlmtt-doc)
+#, fuzzy
+msgid "Documentation for texlive-zlmtt"
+msgstr "Dokumentace pro adaptx"
-#. description(yum-utils:yum-verify)
-msgid "This plugin adds the commands verify, verify-all and verify-rpm. There are also a couple of options. This command works like rpm -V, to verify your installation."
-msgstr ""
+#. description(texlive-specs-z:texlive-zlmtt-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-zlmtt"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(yum-utils:yum-tmprepo)
-msgid "This plugin adds the option --tmprepo which takes a url to a .repo file downloads it and enables it for a single run. This plugin tries to ensure that temporary repositories are safe to use, by default, by not allowing gpg checking to be disabled."
+#. summary(texlive-specs-z:texlive-zwgetfdate)
+msgid "Get package or file date"
msgstr ""
-#. description(yum-utils:yum-filter-data)
-msgid "This plugin adds the options --filter- vendors, groups, packagers, licenses, arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and installed-sizes. Note that each package must match at least one pattern/range in each category, if any were specified."
+#. description(texlive-specs-z:texlive-zwgetfdate)
+msgid ""
+"The package can fetch the date declaration of packages and files used by a document, and then provide the information in macros. The facilities provide a means of obtaining the date of a package being documented; this is mainly of use when doc/docstrip.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(yum-utils:yum-versionlock)
-msgid "This plugin allows certain packages specified in a file to be protected from being updated by newer versions."
-msgstr ""
+#. summary(texlive-specs-z:texlive-zwgetfdate-doc)
+#, fuzzy
+msgid "Documentation for texlive-zwgetfdate"
+msgstr "Dokumentace pro adaptx"
-#. description(yum-utils:yum-protectbase)
-msgid "This plugin allows certain repositories to be protected. Packages in the protected repositories can't be overridden by packages in non-protected repositories even if the non-protected repo has a later version."
-msgstr ""
+#. description(texlive-specs-z:texlive-zwgetfdate-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-zwgetfdate"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(yum-utils:yum-priorities)
-msgid "This plugin allows repositories to have different priorities. Packages in a repository with a lower priority can't be overridden by packages from a repository with a higher priority even if repo has a later version."
+#. summary(texlive-specs-z:texlive-zwpagelayout)
+msgid "Page layout and crop-marks"
msgstr ""
-#. description(vim-plugins:vim-plugin-searchcomplete)
-msgid "This plugin allows to tab-complete words while typing in a search ('/')."
+#. description(texlive-specs-z:texlive-zwpagelayout)
+msgid ""
+"This package was developed as a typographers' toolbox offering important basic features for everyday work. It allows setting the paper size and the page layout; it can print crop marks; and it can reflect pages both horizontally and vertically. The package facilities work with TeX (output via dvips or (x)dvipdfm(x)), and with pdfTeX.\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(yum-utils:yum-tsflags)
-msgid "This plugin allows you to specify optional transaction flags on the yum command line"
-msgstr ""
+#. summary(texlive-specs-z:texlive-zwpagelayout-doc)
+#, fuzzy
+msgid "Documentation for texlive-zwpagelayout"
+msgstr "Dokumentace pro adaptx"
-#. description(yum-utils:yum-basearchonly)
-msgid "This plugin makes Yum only install basearch packages on multiarch systems. If you type 'yum install foo' on a x68_64 system, only 'foo-x.y.x86_46.rpm' is If you want to install the foo-x.y.i386.rpm, you have to type 'yum install foo. The plugin only works with 'yum install'."
-msgstr ""
+#. description(texlive-specs-z:texlive-zwpagelayout-doc)
+#, fuzzy
+msgid "This package includes the documentation for texlive-zwpagelayout"
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
-#. description(vim-plugins:vim-plugin-rails)
-msgid "This plugin offers the many features for Ruby on Rails application development."
+#. summary(texlive-specs-z:texlive-zxjafbfont)
+msgid "Fallback CJK font support for xeCJK"
msgstr ""
-#. description(yum-utils:yum-protect-packages)
-msgid "This plugin prevents Yum from removing itself and other protected packages. By default, yum is the only package protected, but by extension this automatically protects everything on which yum depends (rpm, python, glibc, and so on).Therefore, the plugin functions well even without compiling careful lists of all important packages."
+#. description(texlive-specs-z:texlive-zxjafbfont)
+msgid ""
+"The zxjafbfont package\n"
+"\n"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-tselectbuffer)
-msgid "This plugin provides a simple buffer selector. It doesn't have all the features other buffer selectors have but can be useful for quickly switching to a different buffer or for deleting buffers."
+#. summary(texlive-specs-z:texlive-zxjafbfont-doc)
+msgid "Documentation for texlive-zxjafbfont"
msgstr ""
-#. description(vim-plugins:vim-plugin-tselectfiles)
-msgid "This plugin provides a simple file browser. It is not a full blown explorer but can be nevertheless be useful for quickly selecting a few files or renaming them."
+#. description(texlive-specs-z:texlive-zxjafbfont-doc)
+msgid "This package includes the documentation for texlive-zxjafbfont"
msgstr ""
-#. description(yum-utils:yum-fastestmirror)
-msgid "This plugin sorts each repository's mirrorlist by connection speed prior to downloading packages."
+#. summary(texlive-specs-z:texlive-zxjafont)
+msgid "Set up Japanese font families for XeLaTeX"
msgstr ""
-#. description(texlive-pedigree-perl)
+#. description(texlive-specs-z:texlive-zxjafont)
msgid ""
-"This program generates TeX commands to typeset pedigrees -- either TeX fragments or full LaTeX files, to be processed by the authors' pst-pdgr package. The program has support for multilanguage pedigrees (at the present moment the English and Russian languages are supported).\n"
+"The zxjafont package\n"
"\n"
-"date: 2012-04-14 18:51:11 +0000"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(vim-plugins:vim-plugin-supertab)
-msgid "This script allows you to use the tab key to do all your insert completion."
+#. summary(texlive-specs-z:texlive-zxjafont-doc)
+msgid "Documentation for texlive-zxjafont"
msgstr ""
-#. description(vim-plugins:vim-plugin-gnupg)
-msgid "This script implements transparent editing of gpg encrypted files. The filename must have a \".gpg\", \".pgp\" or \".asc\" suffix. When opening such a file the content is decrypted, when opening a new file the script will ask for the recipients of the encrypted file. The file content will be encrypted to all recipients before it is written. The script turns off viminfo and swapfile to increase security."
+#. description(texlive-specs-z:texlive-zxjafont-doc)
+msgid "This package includes the documentation for texlive-zxjafont"
msgstr ""
-#. description(vim-plugins:vim-plugin-gitdiff)
-msgid "This script provides two functions to display git diffs in vim. :GITDiff [commitish] Split the vim window vertically, display the HEAD, or some other changeset, version of the file in the split, then diff them. :GITChanges [commitish] Highlight lines that were changed since the HEAD or some other changeset."
+#. summary(texlive-specs-z:texlive-zxjatype)
+msgid "Standard conforming typesetting of Japanese, for XeLaTeX"
msgstr ""
-#. description(vim-plugins:vim-plugin-locateopen)
+#. description(texlive-specs-z:texlive-zxjatype)
msgid ""
-"This script uses slocate (or a similar application) to allow the user to open a file without having to enter a path. If multiple files are found the user is given the choice of which file to open.\n"
+"The zxjatype package\n"
"\n"
-"Usage: :LocateEdit somefile.txt :LocateSplit somefile.txt :LocateSource somefile.vim :LocateRead somefile.txt"
+"date: 2014-02-26 22:03:13 +0000"
msgstr ""
-#. description(xls2csv)
-msgid "This script will recode a spreadsheet into a different character set and output the recoded data as a csv file. The script came about after many headaches from dealing with Excel spreadsheets from clients that were being received in various character sets."
+#. summary(texlive-specs-z:texlive-zxjatype-doc)
+msgid "Documentation for texlive-zxjatype"
msgstr ""
-#. description(texlive-latexfileversion)
-msgid ""
-"This simple shell script prints the version and date of a LaTeX class or style file. Syntax: latexfileversion <file> This programme handles style files (extension .sty), class files (extension .cls), and other tex input files. The file extension must be given.\n"
-"\n"
-"date: 2012-05-22 11:29:11 +0000"
+#. description(texlive-specs-z:texlive-zxjatype-doc)
+msgid "This package includes the documentation for texlive-zxjatype"
msgstr ""
-#. description(texlive-recycle)
-msgid ""
-"This single-character font is provided as MetaFont source, and in Adobe Type 1 format. It is accompanied by a trivial LaTeX package to use the logo at various sizes.\n"
-"\n"
-"date: 2009-11-09 23:30:52 +0000"
+#. summary(thessalonica-oldstandard-fonts:thessalonica-oldstandard-ttf-fonts)
+msgid "Old Standard Font Family (TrueType Format)"
msgstr ""
-#. description(texlive-show2e)
+#. description(thessalonica-oldstandard-fonts:thessalonica-oldstandard-ttf-fonts)
msgid ""
-"This small package aims at making debugging (especially in an interactive way) easier, by providing \\show variants suited to LaTeX2e commands (whether with optional arguments or robust) and environments. The variant commands also display the internal macros used by such commands, if any. The \\showcs variant helps with macros with exotic names.\n"
+"Old Standard was intended as a multilingual font family suitable for biblical, classical and medieval studies as well as for general-purpose typesetting in languages which use Greek or Cyrillic script. The font is currently available in three shapes: regular, italic and bold. Old Standard is still far from being finished, and yet it already covers a wide range of Latin, Greek and Cyrillic characters. It also supports early Cyrillic letters and signs (including those added in Unicode 5.1) and thus can be used for texts containing fragments in Old Slavonic and Church Slavonic languages.\n"
"\n"
-"date: 2008-08-23 13:48:35 +0000"
+"This package contains fonts in TrueType format."
msgstr ""
-#. description(texlive-minibox)
-msgid ""
-"This small package provides a convenient input syntax for boxes that don't break their text over lines automatically, but do allow manual line breaks. The boxes shrink to the natural width of the longest line they contain.\n"
-"\n"
-"date: 2013-04-21 10:55:17 +0000"
+#. summary(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-otf-fonts)
+msgid "Tempora LGC Unicode Fonts (OpenType Format)"
msgstr ""
-#. description(texlive-realscripts)
+#. description(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-otf-fonts)
msgid ""
-"This small package replaces \\textsuperscript and \\textsubscript commands by equivalent commands that use OpenType font features to access appropriate glyphs if possible. The package also patches LaTeX's default footnote command to use this new \\textsuperscript for footnote symbols. The package requires fontspec running on either XeLaTeX or LuaLaTeX. The package holds functions that were once parts of the xltxtra package, which now loads realscripts by default.\n"
+"Tempora LGC Unicode is a font family, designed to provide a free typeface suitable for word processing in languages which use 3 European alphabets: Latin, Greek and Cyrillic. It may be especially useful for philologists (mainly slavists and classicists), since it supports historical Cyrillic letters available in the Unicode standard (including letters used in Russian pre-1918 orthography) as well as all accented combinations and additional characters needed for fully accented Greek (both classical and modern). Tempora LGC Unicode is a \"smart\" font, intended to demonstrate nicities of the OpenType technologie, applicable to European scripts.\n"
"\n"
-"date: 2013-02-27 16:45:34 +0000"
+"This package contains fonts in OpenType format."
msgstr ""
-#. description(texlive-pnas2009)
-msgid ""
-"This style produces bibliographies in the format of \"Proceedings of the National Academy of Sciences, USA\". The style was derived from the standard unsrt.bst and adapted to the new (2009) formatting rules.\n"
-"\n"
-"date: 2009-12-06 08:16:45 +0000"
+#. summary(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-ttf-fonts)
+msgid "Tempora LGC Unicode Fonts (TrueType Format)"
msgstr ""
-#. description(texlive-seuthesis)
+#. description(thessalonica-tempora-lgc-fonts:thessalonica-tempora-lgc-ttf-fonts)
msgid ""
-"This template is for theses at Southeastern University, Nanjing, China.\n"
+"Tempora LGC Unicode is a font family, designed to provide a free typeface suitable for word processing in languages which use 3 European alphabets: Latin, Greek and Cyrillic. It may be especially useful for philologists (mainly slavists and classicists), since it supports historical Cyrillic letters available in the Unicode standard (including letters used in Russian pre-1918 orthography) as well as all accented combinations and additional characters needed for fully accented Greek (both classical and modern). Tempora LGC Unicode is a \"smart\" font, intended to demonstrate nicities of the OpenType technologie, applicable to European scripts.\n"
"\n"
-"date: 2012-02-09 20:58:23 +0000"
+"This package contains fonts in TrueType format."
msgstr ""
-#. description(yum-utils:yum-merge-conf)
-msgid "This yum plugin adds the \"--merge-conf\" command line option. With this option, Yum will ask you what to do with config files which have changed on updating a package."
+#. summary(thessalonica-theano-fonts:thessalonica-theano-ttf-fonts)
+msgid "Theano Classical Fonts (TrueType Format)"
msgstr ""
-#. description(threadweaver:threadweaver-devel-32bit)
+#. description(thessalonica-theano-fonts:thessalonica-theano-ttf-fonts)
msgid ""
-"ThreadWeaver is a helper for multithreaded programming. It uses a job-based interface to queue tasks and execute them in an efficient way.\n"
+"Theano Classical Fonts include three fonts listed below. Each font is currently available just in one weight/shape (regular) and contains Latin, Greek and Cyrillic letters.\n"
"\n"
-"You simply divide the workload into jobs, state the dependencies between the jobs and ThreadWeaver will work out the most efficient way of dividing the work between threads within a set of resource limits. Development files."
+"Theano Didot. A classicist face, with both its Roman and Greek parts implemented in Didot style. Unlike Old Standard, this font is designed from French sources.\n"
+"\n"
+"Theano Modern. A font with Greek letters designed in the Porsonic style. Unlike most modern implementation, it is based on Figgins Pica No. 3 / Small Pica No. 2 — probably the most successful and once the most popular Greek face of a Porsonic origin — rather than on later Monotype's design. The accompanying Latin font is implemented in the Modern style and modelled after English Modern faces of later 19th century, often used alonglide with Porsonic Greek types.\n"
+"\n"
+"Theano Old Style. A modernized \"Old Style\" Greek font with a large number of historic ligatures and alternate forms, modelled after some early 19th century types designed by Figgins' type foundry. It is accompanied by a Latin face based on some \"Old Style\" Roman fonts of the late 19th and early 20th century.\n"
+"\n"
+"This package contains fonts in TrueType format."
msgstr ""
-#. summary(texlive-pst-gr3d)
-msgid "Three dimensional grids with PSTricks"
+#. summary(thunar-plugin-shares:thunar-plugin-shares-lang)
+msgid "Languages for package thunar-plugin-shares"
+msgstr "Jazykový balíček pro thunar-plugin-shares"
+
+#. description(thunar-plugin-shares:thunar-plugin-shares-lang)
+msgid "Provides translations to the package thunar-plugin-shares"
msgstr ""
-#. summary(texlive-pst-ob3d)
-msgid "Three dimensional objects using PSTricks"
+#. summary(thunar-plugin-vcs:thunar-plugin-vcs-lang)
+msgid "Languages for package thunar-plugin-vcs"
+msgstr "Jazykový balíček pro thunar-plugin-vcs"
+
+#. description(thunar-plugin-vcs:thunar-plugin-vcs-lang)
+msgid "Provides translations to the package thunar-plugin-vcs"
msgstr ""
-#. summary(texlive-mathabx)
-msgid "Three series of mathematical symbols"
+#. summary(thunar-volman:thunar-volman-branding-upstream)
+msgid "Upstream Branding of thunar-volman"
msgstr ""
-#. description(texlive-thuthesis)
-msgid ""
-"ThuThesis is a LaTeX thesis template package for Tsinghua University in order to make it easy to write theses for either bachelor's, master's or doctor's degree.\n"
-"\n"
-"date: 2009-03-02 14:13:08 +0000"
+#. description(thunar-volman:thunar-volman-branding-upstream)
+msgid "This package provides the upstream look and feel for the Thunar Volume Manager."
msgstr ""
-#. summary(texlive-thumb)
-msgid "Thumb marks in documents"
+#. summary(tibetan-machine-uni-fonts)
+msgid "Font for Tibetan Script"
msgstr ""
-#. summary(texlive-thumbpdf)
-msgid "Thumbnails for pdfTeX and dvips/ps2pdf"
+#. description(tibetan-machine-uni-fonts)
+msgid "The Tibetan & Himalayan Library is pleased to make available the alpha release of the Unicode character based Tibetan Machine Uni OpenType font for writing Tibetan, Dzongkha and Ladakhi in dbu can script with full support for the Sanskrit combinations found in chos skad texts."
msgstr ""
-#. summary(texlive-longnamefilelist)
-msgid "Tidy \\listfiles with long file names"
+#. summary(tidy:tidy-doc)
+msgid "Documentation for tidy and libtidy-0_99-0"
msgstr ""
-#. description(texlive-tie)
-msgid ""
-"Tie was originally developed to allow web programmers to apply more than one change file to their source. The program may also be used to create a new version of a web file that incorporates existing changes.\n"
-"\n"
-"date: 2012-04-27 10:20:53 +0000"
+#. description(tidy:tidy-doc)
+msgid "This package contains the documentation for both tidy and libtidy."
msgstr ""
-#. summary(texlive-sa-tikz)
-msgid "TikZ library to draw switching architectures"
+#. summary(tilda:tilda-lang)
+msgid "Languages for package tilda"
+msgstr "Jazykový balíček pro tilda"
+
+#. description(tilda:tilda-lang)
+msgid "Provides translations to the package tilda"
msgstr ""
-#. summary(texlive-moderntimeline)
+#. summary(tint2:tint2-lang)
#, fuzzy
-msgid "Timelines for use with moderncv"
-msgstr "Program pro odhalování slabých hesel"
+#| msgid "Languages for package mtpaint"
+msgid "Languages for package tint2"
+msgstr "Jazykový balíček pro mtpaint"
-#. summary(texlive-txfonts)
-msgid "Times-like fonts in support of mathematics"
+#. description(tint2:tint2-lang)
+#, fuzzy
+msgid "Provides translations to the package tint2"
+msgstr "Dokumentace pro castor"
+
+#. summary(tinyca2)
+msgid "A Graphical Tool for Managing a Certification Authority"
msgstr ""
#. description(tinyca2)
@@ -29085,14 +41501,34 @@
"- client certificates for use in web browsers, email clients, IPsec, and more."
msgstr ""
+#. summary(tkdiff)
+msgid "2 and 3-way diff/merge tool"
+msgstr ""
+
#. description(tkdiff)
msgid "TkDiff is a graphical 2 and 3-way diff/merge tool."
msgstr "TkDiff je grafický nástroj na zjišťování rozdílů a slučování souborů."
+#. summary(tkfont)
+msgid "Tool to select fonts"
+msgstr ""
+
+#. description(tkfont)
+msgid "It is a program similar to xfontsel."
+msgstr "Program podobající se xfontsel."
+
+#. summary(tkinfo)
+msgid "Viewer for info-files"
+msgstr ""
+
#. description(tkinfo)
msgid "TkInfo is a tk script to read GNU \"info\" files and display them. TkInfo can be used stand-alone (via WISH) or embedded within an application to provide integrated, online help."
msgstr "TkInfo je tk skript pro zobrazování GNU \"info\" souborů. Může být používán samostatně (pomocí WISH) nebo vestavěný do aplikací, které poskytují online nápovědu."
+#. summary(tkirc)
+msgid "A graphical IRC client"
+msgstr ""
+
#. description(tkirc)
msgid ""
"Tkirc is a graphical frontend for the ircII or epic textmode IRC clients. It is written in Tcl/Tk and thus can be greatly configured, customized and extended.\n"
@@ -29100,121 +41536,230 @@
"Documentation can be found under /usr/share/doc/packages/tkirc/README and the directory /usr/share/doc/packages/tkirc/.tkirc2 contains configuration examples, that can be copied over to one's home directory."
msgstr ""
-#. description(tomcat)
+#. summary(tkman)
+msgid "Manual-browser for X"
+msgstr ""
+
+#. description(tkman)
+msgid "A manual browser for X with hyperlinks, history, and more."
+msgstr "Prohlížeč manuálových stránek pro X s hypertextovými odkazy, historií apod.."
+
+#. summary(tkxcd)
+msgid "Graphical frontend for diff"
+msgstr ""
+
+#. description(tkxcd)
+msgid "This is a diff front-end with a look and feel based on Atria Clearcase xcleardiff. Both files are displayed in a window each and the differences are marked in different colors."
+msgstr ""
+
+#. summary(tlp)
+msgid "Save battery power on laptops"
+msgstr ""
+
+#. description(tlp)
+msgid "TLP implements advanced power management for Linux. TLP is a pure command line tool with automated background tasks. It does not contain a GUI."
+msgstr ""
+
+#. summary(tlp:tlp-rdw)
+msgid "Radio Device Wizard"
+msgstr ""
+
+#. description(tlp:tlp-rdw)
+msgid "Switch radios upon network connect/disconnect and dock/undock."
+msgstr ""
+
+#. summary(tntdb:tntdb-doc)
+#, fuzzy
+msgid "Documentation for tntdb"
+msgstr "Dokumentace pro adaptx"
+
+#. description(tntdb:tntdb-doc)
msgid ""
-"Tomcat is the servlet container that is used in the official Reference Implementation for the Java Servlet and JavaServer Pages technologies. The Java Servlet and JavaServer Pages specifications are developed by Sun under the Java Community Process.\n"
+"Tntdb is a library for simple database access.\n"
"\n"
-"Tomcat is developed in an open and participatory environment and released under the Apache Software License version 2.0. Tomcat is intended to be a collaboration of the best-of-breed developers from around the world."
+"The database independent layer offers easy to use methods for working with the database and also greatly simplifies resource-management. The classes hold reference-counted pointers to the actual implementation. They are copyable and assignable. The user can use the classes just like simple values. The resources they reference are freed, when the last reference is deleted. This happens normally just by leaving the scope. There is normally no reason to instantiate them dynamically on the heap.\n"
+"\n"
+"This package contains documentation"
msgstr ""
-#. summary(translation-update-upstream)
-msgid "Tool for Translation Update from Upstream"
+#. summary(tomboy:tomboy-lang)
+msgid "Languages for package tomboy"
+msgstr "Jazykový balíček pro tomboy"
+
+#. description(tomboy:tomboy-lang)
+msgid "Provides translations to the package tomboy"
msgstr ""
-#. summary(tkfont)
-msgid "Tool to select fonts"
+#. summary(tomcat:tomcat-docs-webapp)
+msgid "The docs web application for Apache Tomcat"
msgstr ""
-#. summary(translate-toolkit)
-msgid "Tools and API to assist with translation and software localization"
+#. description(tomcat:tomcat-docs-webapp)
+#, fuzzy
+msgid "The documentation of web application for Apache Tomcat."
+msgstr "Překlady KDE aplikací."
+
+#. summary(tomcat:tomcat-embed)
+#, fuzzy
+msgid "Libraries for Embedding Apache Tomcat"
+msgstr "Sdílené knihovny pro LADCCA systém"
+
+#. description(tomcat:tomcat-embed)
+msgid "Embedded support (various Libraries) for Apache Tomcat"
msgstr ""
-#. summary(texlive-skb)
-msgid "Tools for a repository of long-living documents"
+#. summary(tomcat:tomcat-javadoc)
+msgid "Javadoc generated documentation for Apache Tomcat"
msgstr ""
-#. summary(texlive-tkz-euclide)
+#. description(tomcat:tomcat-javadoc)
#, fuzzy
-msgid "Tools for drawing euclidean geometry"
-msgstr "Nástroje pro IrDA komunikaci"
+#| msgid "Javadoc documentation for javamail."
+msgid "Javadoc generated documentation files for Apache Tomcat."
+msgstr "Javadoc dokumentace pro javamail."
-#. summary(texlive-tkz-fct)
-#, fuzzy
-#| msgid "Tools for testing of various Bluetooth-functions"
-msgid "Tools for drawing graphs of functions"
-msgstr "Testovací nástroje Bluetooth funkcí"
+#. summary(tomcat:tomcat-jsvc)
+msgid "Apache jsvc wrapper for Apache Tomcat as separate service"
+msgstr ""
-#. summary(texlive-tkz-base)
-msgid "Tools for drawing with a cartesian coordinate system"
+#. description(tomcat:tomcat-jsvc)
+msgid "Systemd service and wrapper scripts to start tomcat with jsvc, which allows tomcat to perform some privileged operations (e.g. bind to a port < 1024) and then switch identity to a non-privileged user."
msgstr ""
-#. summary(texlive-pxbase)
-msgid "Tools for use with (u)pLaTeX"
+#. summary(tomoe-gtk:tomoe-gtk-lang)
+msgid "Languages for package tomoe-gtk"
+msgstr "Jazykový balíček pro tomoe-gtk"
+
+#. description(tomoe-gtk:tomoe-gtk-lang)
+msgid "Provides translations to the package tomoe-gtk"
msgstr ""
-#. summary(texlive-librarian)
-msgid "Tools to create bibliographies in TeX"
+#. summary(totem:totem-lang)
+msgid "Languages for package totem"
+msgstr "Jazykový balíček pro totem"
+
+#. description(totem:totem-lang)
+msgid "Provides translations to the package totem"
msgstr ""
-#. summary(texlive-stack)
-#, fuzzy
-#| msgid "Tools to Create and Apply deltarpms"
-msgid "Tools to define and use stacks"
-msgstr "Nástroje na vytváření a aplikaci deltarpm balíčků"
+#. summary(totem-pl-parser:totem-pl-parser-lang)
+msgid "Languages for package totem-pl-parser"
+msgstr "Jazykový balíček pro totem-pl-parser"
-#. description(texlive-polski)
+#. description(totem-pl-parser:totem-pl-parser-lang)
+msgid "Provides translations to the package totem-pl-parser"
+msgstr ""
+
+#. summary(tracker:tracker-lang)
+msgid "Languages for package tracker"
+msgstr "Jazykový balíček pro tracker"
+
+#. description(tracker:tracker-lang)
+msgid "Provides translations to the package tracker"
+msgstr ""
+
+#. summary(trader:trader-lang)
+msgid "Languages for package trader"
+msgstr "Jazykový balíček pro trader"
+
+#. description(trader:trader-lang)
+msgid "Provides translations to the package trader"
+msgstr ""
+
+#. summary(transifex-client)
+msgid "Transifex Command-line Client"
+msgstr ""
+
+#. description(transifex-client)
msgid ""
-"Tools to typeset documents in Polish using LaTeX2e with Polish fonts (the so-called PL fonts), EC fonts or CM fonts. (This package was previously known as platex, but has been renamed to resolve a name clash.)\n"
+"The Transifex Command-line Client is a command line tool that enables you to easily manage your translations within a project without the need of an elaborate UI system.\n"
"\n"
-"date: 2010-09-24 14:10:39 +0000"
+"You can use the command-line client to easily create new resources, map locale files to translations and synchronize your Transifex project with your local repository and vice verca. Translators and localization managers can also use it to handle large volumes of translation files easily and without much hassle."
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-town)
-msgid "Town stamps collection for Tux Paint"
+#. summary(translate-shell)
+msgid "Google Translate to serve as a command-line tool"
msgstr ""
-#. summary(texlive-inputtrc)
-msgid "Trace which file loads which"
+#. description(translate-shell)
+msgid "Translate Shell is a command-line translator powered by Google Translate. It gives you easy access to Google Translate in your terminal."
msgstr ""
-#. description(texlive-tram)
+#. summary(translate-toolkit)
+#. summary(translate-toolkit:translate-toolkit-devel-doc)
+msgid "Tools and API to assist with translation and software localization"
+msgstr ""
+
+#. description(translate-toolkit)
msgid ""
-"Tram boxes are highlighted with patterns of dots; the package defines an environment tram that typesets its content into a tram box. The pattern used may be selected in an optional argument to the environment.\n"
+"The Translate Toolkit is a set of software and documentation designed to help make the lives of localizers both more productive and less frustrating.\n"
"\n"
-"date: 2013-04-05 11:20:40 +0000"
+"The software includes programs to convert localization formats to the common PO, and emerging XLIFF format. There are also programs to check and manage PO and XLIFF files. Online documentation includes guides on using the tools, running a localization project and how to localize various projects from OpenOffice.org to Mozilla.\n"
+"\n"
+"At its core the software contains a set of classes for handling various localization storage formats: DTD, properties, OpenOffice.org GSI/SDF, CSV, MO, Qt .ts, TMX, TBX, WordFast txt, Gettext .mo, Windows RC, and of course PO and XLIFF. It also provides scripts to convert between these formats.\n"
+"\n"
+"Also part of the Toolkit are Python programs to create word counts, merge translations and perform various checks on translation files."
msgstr ""
-#. summary(transifex-client)
-msgid "Transifex Command-line Client"
+#. description(translate-toolkit:translate-toolkit-devel-doc)
+msgid "The translate-toolkit-devel-doc package contains Translate Toolkit API documentation for developers wishing to build new tools for the toolkit or to use the libraries in other localization tools."
msgstr ""
-#. summary(texlive-latex2man)
-msgid "Translate LaTeX-based manual pages into Unix man format"
+#. summary(translation-update-upstream)
+msgid "Tool for Translation Update from Upstream"
msgstr ""
-#. summary(texlive-interpreter)
-msgid "Translate input files on the fly"
+#. description(translation-update-upstream)
+msgid ""
+"This is a tool providing update of translations using available upstream resources.\n"
+"\n"
+"The tool tool is intended for use during package compilation as a first command after unpacking of source code.\n"
+"\n"
+"For more see README and HOWTO.\n"
+"\n"
+"This package also includes translation update data files."
msgstr ""
-#. summary(texlive-microtype-de)
-msgid "Translation into German of the documentation of microtype"
+#. summary(transmageddon)
+msgid "A Video Transcoder"
msgstr ""
#. description(transmageddon)
msgid "Transmageddon is a video transcoder for Linux and Unix systems built using GStreamer. It supports almost any format as its input and can generate a very large host of output files. The goal of the application was to help people to create the files they need to be able to play on their mobile devices and for people not hugely experienced with multimedia to generate a multimedia file without having to resort to command line tools with ungainly syntaxes."
msgstr ""
-#. summary(texlive-xytree)
-msgid "Tree macros using XY-Pic"
+#. summary(transmageddon:transmageddon-lang)
+msgid "Languages for package transmageddon"
+msgstr "Jazykový balíček pro transmageddon"
+
+#. description(transmageddon:transmageddon-lang)
+msgid "Provides translations to the package transmageddon"
msgstr ""
-#. summary(texlive-tree-dvips)
-msgid "Trees and other linguists' macros"
+#. summary(transmission:transmission-gtk-lang)
+#. summary(transmission:transmission-qt-lang)
+msgid "Languages for package transmission"
+msgstr "Jazykový balíček pro transmission"
+
+#. description(transmission:transmission-gtk-lang)
+#. description(transmission:transmission-qt-lang)
+msgid "Provides translations to the package transmission"
msgstr ""
-#. summary(texlive-pst-tree)
-msgid "Trees, using pstricks"
+#. summary(tuladha-jejeg-fonts)
+msgid "Javanese Font"
msgstr ""
-#. summary(texlive-trimspaces)
-msgid "Trim spaces around an argument or within a macro"
+#. description(tuladha-jejeg-fonts)
+msgid "Font supporting unicode codepoints from U+A980 to U+A9DF."
msgstr ""
-#. summary(texlive-truncate)
-msgid "Truncate text to a specified width"
+#. summary(tulip:tulip-devel-doc)
+msgid "Visualization of huge graphs - development documentation"
msgstr ""
-#. description(tulip:tulip-devel)
+#. description(tulip:tulip-devel-doc)
+#. description(tulip:tulip-doc)
msgid ""
"Tulip software is a system dedicated to the visualization of huge graphs. It manages graphs with a number of elements(node and edges) up to 500.000 on a personal computer(PIII 600, with 256MB). Its SuperGraph technology architecture enables to do the following things :\n"
"\n"
@@ -29228,846 +41773,1091 @@
"* Automatic Metric coloration of graphs"
msgstr ""
-#. summary(texlive-isodate)
-msgid "Tune the output format of dates according to language"
+#. summary(tulip:tulip-doc)
+msgid "Visualization of huge graphs - user documentation"
msgstr ""
-#. summary(texlive-lshort-turkish)
-#, fuzzy
-#| msgid "An Turkish dictionary for aspell"
-msgid "Turkish introduction to LaTeX"
-msgstr "Turecký slovník pro aspell"
+#. summary(tumbler:tumbler-doc)
+msgid "Developer Documentation for tumbler"
+msgstr ""
-#. description(turpial)
-msgid "Turpial is a microblogging client with support for multiple interfaces. It's developed using Python and its goal is to be native, light and integrated with desktop environment, but without loosing any functionality."
+#. description(tumbler:tumbler-doc)
+msgid "This package provides the developer documentation for tumbler."
msgstr ""
-#. summary(votca-csg:votca-csg-tutorials)
-msgid "Tutorial documentation for VOTCA Coarse Graining Engine"
+#. summary(tuned:tuned-gtk)
+msgid "Disk and net statistic monitoring systemtap scripts - GTK GUI"
msgstr ""
-#. summary(tuxcursors)
-msgid "Tux Cursors!"
+#. description(tuned:tuned-gtk)
+msgid "GTK GUI that can control tuned and provide simple profile editor."
msgstr ""
-#. description(texlive-mxedruli)
-msgid ""
-"Two Georgian fonts, in both Metafont and Type 1 formats, which cover the Mxedruli and the Xucuri alphabets.\n"
-"\n"
-"date: 2013-04-18 11:20:04 +0000"
+#. summary(tuned:tuned-profiles-atomic)
+msgid "Additional tuned profiles targeted to Atomic"
msgstr ""
-#. description(texlive-texdiff)
-msgid ""
-"Two files are compared and a new TeX file is output. When the output file is processed with (La)TeX it marks new changes with blue and old text with red with a strike-through line. Furthermore, passages with changes are marked at the margin with grey bars by the LaTeX changebar package.\n"
-"\n"
-"date: 2012-06-27 18:43:57 +0000"
+#. description(tuned:tuned-profiles-atomic)
+msgid "Additional tuned profiles targeted to Atomic host and guest."
msgstr ""
-#. description(texlive-txfonts)
-msgid ""
-"Txfonts supplies virtual text roman fonts using Adobe Times (or URW NimbusRomNo9L) with some modified and additional text symbols in the OT1, T1, and TS1 encodings; maths alphabets using Times/URW Nimbus; maths fonts providing all the symbols of the Computer Modern and AMS fonts, including all the Greek capital letters from CMR; and additional maths fonts of various other symbols. The set is complemented by a sans-serif set of text fonts, based on Helvetica/NimbusSanL, and a monospace set. All the fonts are in Type 1 format (AFM and PFB files), and are supported by TeX metrics (VF and TFM files) and macros for use with LaTeX.\n"
-"\n"
-"date: 2009-01-15 08:33:18 +0000"
+#. summary(tuned:tuned-profiles-nfv)
+msgid "Additional tuned profiles targeted to Network Function Virtualization (NFV)"
msgstr ""
-#. description(txt2tags)
-msgid "Txt2tags is a generic text converter. From a simple text file with minimal markup, it generates documents on the following formats: HTML, XHTML, sgml, LaTeX, Lout, man, Magic Point (mgp), MoinMoin and Adobe PageMaker. Supports heading, font beautifiers, verbatim, quote, link, lists, table and image. There are GUI, Web and cmdline interfaces. It's a single Python script and no external commands or libraries are needed."
+#. description(tuned:tuned-profiles-nfv)
+msgid "Additional tuned profiles targeted to Network Function Virtualization (NFV)."
msgstr ""
-#. summary(texlive-nanumtype1)
-msgid "Type1 subfonts of Nanum Korean fonts"
+#. summary(tuned:tuned-profiles-oracle)
+msgid "Additional tuned profiles targeted to Oracle loads"
msgstr ""
-#. summary(texlive-luatexja)
-msgid "Typesest Japanese with lua(la)tex"
+#. description(tuned:tuned-profiles-oracle)
+msgid "Additional tuned profiles targeted to Oracle loads."
msgstr ""
-#. summary(texlive-logicpuzzle)
-msgid "Typeset (grid-based) logic puzzles"
+#. summary(tuned:tuned-profiles-realtime)
+msgid "Additional tuned profiles targeted to realtime"
msgstr ""
-#. summary(texlive-xcookybooky)
-msgid "Typeset (potentially long) recipes"
+#. description(tuned:tuned-profiles-realtime)
+msgid "Additional tuned profiles targeted to realtime."
msgstr ""
-#. summary(texlive-polynomial)
-msgid "Typeset (univariate) polynomials"
+#. summary(tuned:tuned-profiles-sap)
+msgid "Additional tuned profile(s) targeted to SAP NetWeaver loads"
msgstr ""
-#. summary(texlive-zhnumber)
-msgid "Typeset Chinese representations of numbers"
+#. description(tuned:tuned-profiles-sap)
+msgid "Additional tuned profile(s) targeted to SAP NetWeaver loads."
msgstr ""
-#. summary(texlive-typehtml)
-#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Typeset HTML directly from LaTeX"
-msgstr "Zpracování XML pomocí TeXu"
+#. summary(tuned:tuned-profiles-sap-hana)
+msgid "Additional tuned profile(s) targeted to SAP HANA loads"
+msgstr ""
-#. summary(texlive-imsproc)
-msgid "Typeset IMS conference proceedings"
+#. description(tuned:tuned-profiles-sap-hana)
+msgid "Additional tuned profile(s) targeted to SAP HANA loads."
msgstr ""
-#. summary(texlive-staves)
-msgid "Typeset Icelandic staves and runic letters"
+#. summary(tuned:tuned-utils)
+#. summary(tuned:tuned-utils-systemtap)
+msgid "Disk and net statistic monitoring systemtap scripts"
msgstr ""
-#. summary(texlive-kix)
-msgid "Typeset KIX codes"
+#. description(tuned:tuned-utils)
+msgid "This package contains utilities that can help you to fine tune your system and manage tuned profiles."
msgstr ""
-#. summary(texlive-karnaugh)
-msgid "Typeset Karnaugh-Veitch-maps"
+#. description(tuned:tuned-utils-systemtap)
+msgid "This package contains several systemtap scripts to allow detailed manual monitoring of the system. Instead of the typical IO/sec it collects minimal, maximal and average time between operations to be able to identify applications that behave power inefficient (many small operations instead of fewer large ones)."
msgstr ""
-#. summary(texlive-luatexko)
-#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Typeset Korean with Lua(La)TeX"
-msgstr "Zpracování XML pomocí TeXu"
+#. summary(tuxcursors)
+msgid "Tux Cursors!"
+msgstr ""
-#. summary(texlive-othelloboard)
-msgid "Typeset Othello (Reversi) diagrams of any size, with annotations"
+#. description(tuxcursors)
+msgid "A cursor set that has nice animated penguins."
msgstr ""
-#. summary(texlive-pst-exa)
-msgid "Typeset PSTricks examples, with code"
+#. summary(tuxpaint-config:tuxpaint-config-lang)
+msgid "Languages for package tuxpaint-config"
msgstr ""
-#. summary(texlive-polski)
-msgid "Typeset Polish documents with LaTeX and Polish fonts"
+#. description(tuxpaint-config:tuxpaint-config-lang)
+msgid "Provides translations to the package tuxpaint-config"
msgstr ""
-#. summary(texlive-rcs-multi)
-msgid "Typeset RCS version control in multiple-file documents"
+#. summary(tuxpaint-stamps)
+msgid "Rubber stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-sasnrdisplay)
-msgid "Typeset SAS or R code or output"
+#. description(tuxpaint-stamps)
+msgid "This package contains the documentation for the 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-spanish-mx)
-msgid "Typeset Spanish as in Mexico"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-animals)
+msgid "Animals stamps stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-svn)
-msgid "Typeset Subversion keywords"
+#. description(tuxpaint-stamps:tuxpaint-stamps-animals)
+msgid "tuxpaint-stamps-animals package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-youngtab)
-msgid "Typeset Young-Tableaux"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-clothes)
+msgid "Clothes stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-piano)
-msgid "Typeset a basic 2-octave piano diagram"
+#. description(tuxpaint-stamps:tuxpaint-stamps-clothes)
+msgid "tuxpaint-stamps-clothes package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-unswcover)
-msgid "Typeset a dissertation cover page following UNSW guidelines"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-food)
+msgid "Food stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-resumecls)
-msgid "Typeset a resumee in both Chinese and English"
+#. description(tuxpaint-stamps:tuxpaint-stamps-food)
+msgid "tuxpaint-stamps-food package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-productbox)
-msgid "Typeset a three-dimensional product box"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-hobbies)
+msgid "Hobbies stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-poetrytex)
-msgid "Typeset anthologies of poetry"
+#. description(tuxpaint-stamps:tuxpaint-stamps-hobbies)
+msgid "tuxpaint-stamps-hobbies package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-pracjourn)
-msgid "Typeset articles for PracTeX"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-household)
+msgid "Household items stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-resphilosophica)
-msgid "Typeset articles for the journal Res Philosophica"
+#. description(tuxpaint-stamps:tuxpaint-stamps-household)
+msgid "tuxpaint-stamps-household package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-pst-asr)
-msgid "Typeset autosegmental representations for linguists"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-medical)
+msgid "Medical stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-octavo)
-msgid "Typeset books following classical design and layout"
+#. description(tuxpaint-stamps:tuxpaint-stamps-medical)
+msgid "tuxpaint-stamps-medical package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-sidecap)
-msgid "Typeset captions sideways"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-military)
+msgid "Military stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-setdeck)
-msgid "Typeset cards for Set"
+#. description(tuxpaint-stamps:tuxpaint-stamps-military)
+msgid "tuxpaint-stamps-military package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-mhchem)
-msgid "Typeset chemical formulae/equations and Risk and Safety phrases"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-naturalforces)
+msgid "Natural forces stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-pst-jtree)
-msgid "Typeset complex trees for linguists"
+#. description(tuxpaint-stamps:tuxpaint-stamps-naturalforces)
+msgid "tuxpaint-stamps-naturalforces package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-scrjrnl)
-msgid "Typeset diaries or journals"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-people)
+msgid "People stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-play)
-#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Typeset drama using LaTeX"
-msgstr "Zpracování XML pomocí TeXu"
+#. description(tuxpaint-stamps:tuxpaint-stamps-people)
+msgid "tuxpaint-stamps-people package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+msgstr ""
-#. summary(texlive-lettrine)
-msgid "Typeset dropped capitals"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-plants)
+msgid "Plants stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-memoir)
-msgid "Typeset fiction, non-fiction and mathematical books"
+#. description(tuxpaint-stamps:tuxpaint-stamps-plants)
+msgid "tuxpaint-stamps-plants package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-psgo)
-msgid "Typeset go diagrams with PSTricks"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-seasonal)
+msgid "Seasonal stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-labbook)
-msgid "Typeset laboratory journals"
+#. description(tuxpaint-stamps:tuxpaint-stamps-seasonal)
+msgid "tuxpaint-stamps-seasonal package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-listliketab)
-msgid "Typeset lists as tables"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-space)
+msgid "Space stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-limap)
-msgid "Typeset maps and blocks according to the Information Mapping method"
+#. description(tuxpaint-stamps:tuxpaint-stamps-space)
+msgid "tuxpaint-stamps-space package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-method)
-msgid "Typeset method and variable declarations"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-sports)
+msgid "Sports stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-miller)
-msgid "Typeset miller indices"
+#. description(tuxpaint-stamps:tuxpaint-stamps-sports)
+msgid "tuxpaint-stamps-sports package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. description(texlive-miller)
-msgid ""
-"Typeset miller indices, e.g., <1-20>, that are used in material science with an easy syntax. Minus signs are printed as bar above the corresponding number.\n"
-"\n"
-"date: 2007-01-11 23:17:35 +0000"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-symbols)
+msgid "Symbol stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-newspaper)
-msgid "Typeset newsletters to resemble newspapers"
+#. description(tuxpaint-stamps:tuxpaint-stamps-symbols)
+msgid "tuxpaint-stamps-symbols package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-sidenotes)
-msgid "Typeset notes containing rich content, in the margin"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-town)
+msgid "Town stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-snotez)
-msgid "Typeset notes, in the margin"
+#. description(tuxpaint-stamps:tuxpaint-stamps-town)
+msgid "tuxpaint-stamps-town package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-volumes)
-msgid "Typeset only parts of a document, with complete indexes etcetera"
+#. summary(tuxpaint-stamps:tuxpaint-stamps-vehicles)
+msgid "Vehicle stamps collection for Tux Paint"
msgstr ""
-#. summary(texlive-musuos)
-msgid "Typeset papers for the department of music, Osnabruck"
+#. description(tuxpaint-stamps:tuxpaint-stamps-vehicles)
+msgid "tuxpaint-stamps-vehicles package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
msgstr ""
-#. summary(texlive-parallel)
-msgid "Typeset parallel texts"
+#. summary(tvbrowser)
+msgid "Digital TV guide"
msgstr ""
-#. summary(texlive-path)
-msgid "Typeset paths, making them breakable"
+#. description(tvbrowser)
+msgid "TV-Browser is Plugin based digital TV guide. Plugins can be installed with the download function of TV-Browser."
msgstr ""
-#. description(texlive-SIunits)
-msgid ""
-"Typeset physical units following the rules of the International System of Units (SI). The package requires amstext, for proper representation of some values. Note that the package is now superseded by siunitx; siunits has maintenance-only support, now.\n"
-"\n"
-"date: 2008-06-16 15:21:40 +0000"
+#. summary(txt2man)
+#, fuzzy
+#| msgid "Converts ASCII Text into PostScript"
+msgid "Convert Flat ASCII Text to man Page Format"
+msgstr "Konvertor ASCII textu do PostScriptu "
+
+#. description(txt2man)
+msgid "Txt2man converts flat ASCII text to man page format. It is a shell script using gnu awk, that should run on any Unix like system."
msgstr ""
-#. summary(texlive-register)
-msgid "Typeset programmable elements in digital hardware (registers)"
+#. summary(txt2tags)
+msgid "Converts text files to HTML, XHTML, sgml, LaTeX, man and others"
msgstr ""
-#. description(texlive-listings)
-msgid ""
-"Typeset programs (programming code) within LaTeX. The source code is read directly by TeX. Keywords, comments and strings can be typeset using different styles (default is bold for keywords, italic for comments and no special style for strings). Includes support for hyperref. To use, simply \\usepackage{listings}, identify the language with \\lstset{language=Python}, then employ the \\begin{lstlisting} ... \\end{lstlisting} environment or the \\lstinputlisting{filename.py} command. Short (in-line) listings are also available, using either \\lstinline|...| or | ... | (after defining the | token with the \\lstMakeShortInline command).\n"
-"\n"
-"date: 2007-03-12 19:45:12 +0000"
+#. description(txt2tags)
+msgid "Txt2tags is a generic text converter. From a simple text file with minimal markup, it generates documents on the following formats: HTML, XHTML, sgml, LaTeX, Lout, man, Magic Point (mgp), MoinMoin and Adobe PageMaker. Supports heading, font beautifiers, verbatim, quote, link, lists, table and image. There are GUI, Web and cmdline interfaces. It's a single Python script and no external commands or libraries are needed."
msgstr ""
-#. summary(texlive-recipecard)
-msgid "Typeset recipes in note-card-sized boxes"
+#. summary(typo3-cms-4_5)
+msgid "Typo3 CMS v4.5"
msgstr ""
-#. summary(texlive-rotpages)
-msgid "Typeset sets of pages upside-down and backwards"
+#. description(typo3-cms-4_5)
+msgid "Enterprise Content Management System, Version 4.5.30"
msgstr ""
-#. summary(texlive-listings)
-msgid "Typeset source code listings using LaTeX"
+#. summary(typo3-cms-4_7)
+msgid "Typo3 CMS v4.7"
msgstr ""
-#. summary(texlive-syllogism)
-msgid "Typeset syllogisms in LaTeX"
+#. description(typo3-cms-4_7)
+msgid "Enterprise Content Management System, Version 4.7.15"
msgstr ""
-#. summary(texlive-synttree)
-msgid "Typeset syntactic trees"
+#. summary(typo3-flow-1_1)
+msgid "Typo3 FLOW Enterprise Web Application Framework"
msgstr ""
-#. summary(texlive-variations)
-#, fuzzy
-#| msgid "Tools for testing of various Bluetooth-functions"
-msgid "Typeset tables of variations of functions"
-msgstr "Testovací nástroje Bluetooth funkcí"
+#. description(typo3-flow-1_1)
+msgid ""
+"Typo3 FLOW is a web application platform enabling developers creating excell ent web solutions and bring back the joy of coding.\n"
+"\n"
+"It gives you fast results. It is a reliable foundation for complex applications. And it is backed by one of the biggest PHP communities.\n"
+"\n"
+"Typo3 FLOW is not a pick'n'mix store of motley components. It's a framework which helps you with the infrastructure of your application. Object Lifecycle Management, Package Management, Resource Management and Security are on it's home field. Real business logic is left to custom packages.\n"
+"\n"
+"Whenever possible, Typo3 FLOW analyzes your code for choosing the right configuration for you. Clear conventions and an intuitive API let you concentrate on the essential parts of your application. After all you want to write PHP and not XML, YAML, INI, don't you?\n"
+"\n"
+"Well-proven concepts from various frameworks, applications and programming languages were considered for the design of Typo3 FLOW. Techniques like Dependency Injection and Aspect-Oriented Programming open up new ways of developing PHP applications. But instead of just copying other solutions, the concepts have been carefully adapted to fit the \"Typo3 FLOW feeling\".\n"
+"\n"
+"Typo3 FLOW was created as the foundation of the next generation Typo3 CMS called Typo3 neos. Applications based on Typo3 FLOW can be used as a plugin in TYPO3 or serve as standalone solutions, completely independent from the CMS. By using FLOW3 as an application platform, you get a CMS on top!"
+msgstr ""
-#. summary(texlive-tensor)
+#. summary(typo3-manager)
#, fuzzy
-msgid "Typeset tensors"
-msgstr "Program pro sázení not"
+#| msgid "A Job Manager"
+msgid "Typo3 Manager"
+msgstr "Plánovač úloh"
-#. summary(texlive-turnstile)
-msgid "Typeset the (logic) turnstile notation"
+#. description(typo3-manager)
+msgid "Typo3 Manager is a management utility for instances of Typo3 products."
msgstr ""
-#. summary(texlive-schwalbe-chess)
-msgid "Typeset the German chess magazine \"Die Schwalbe\""
+#. summary(tzdb)
+msgid "Time zone rules compiler Java"
msgstr ""
-#. summary(texlive-minutes)
-msgid "Typeset the minutes of meetings"
+#. description(tzdb)
+msgid "This is a time zone rules compiler for opensource Java Virtual Machine derived from openjdk8 source code."
msgstr ""
-#. summary(texlive-sapthesis)
-msgid "Typeset theses for Sapienza-University, Rome"
+#. summary(ubuntu-fonts)
+msgid "A unique, custom designed font that has a very distinctive look and feel"
msgstr ""
-#. summary(texlive-tram)
-msgid "Typeset tram boxes in LaTeX"
+#. description(ubuntu-fonts)
+msgid ""
+"The Ubuntu Font Family are a set of matching new libre/open fonts. The development is being funded by Canonical on behalf the wider Free Software community and the Ubuntu project. The technical font design work and implementation is being undertaken by Dalton Maag.\n"
+"\n"
+"Both the final font Truetype/OpenType files and the design files used to produce the font family are distributed under an open licence and you are expressly encouraged to experiment, modify, share and improve. The typeface is sans-serif, uses OpenType features and is manually hinted for clarity on desktop and mobile computing screens.\n"
+"\n"
+"The scope of the Ubuntu Font Family includes all the languages used by the various Ubuntu users around the world in tune with Ubuntu's philosophy which states that every user should be able to use their software in the language of their choice. So the Ubuntu Font Family project will be extended to cover many more written languages."
msgstr ""
-#. summary(texlive-trfsigns)
-msgid "Typeset transform signs"
+#. summary(ubuntu-mate-artwork:ubuntu-mate-icon-theme)
+msgid "Icon themes from Ubuntu MATE"
msgstr ""
-#. summary(texlive-units)
-msgid "Typeset units"
-msgstr ""
+#. description(ubuntu-mate-artwork:ubuntu-mate-icon-theme)
+#, fuzzy
+#| msgid "This package contains the openSUSE theme for YaST2."
+msgid "This package contains icon themes from Ubuntu MATE."
+msgstr "Tento balík obsahuje openSUSE téma pro YaST2."
-#. summary(texlive-parrun)
-msgid "Typesets (two) streams of text running parallel"
+#. summary(ubuntu-mate-artwork:ubuntu-mate-wallpapers)
+msgid "Wallpaper and background images from Ubuntu MATE"
msgstr ""
-#. summary(texlive-poemscol)
-msgid "Typesetting Critical Editions of Poetry"
+#. description(ubuntu-mate-artwork:ubuntu-mate-wallpapers)
+msgid "The default Ubuntu MATE wallpapers for the Ubuntu MATE releases."
msgstr ""
-#. summary(texlive-juramisc)
-msgid "Typesetting German juridical documents"
+#. summary(ubuntu-themes:ubuntu-mono-icon-theme)
+#, fuzzy
+#| msgid "Tango Icon Theme"
+msgid "Ubuntu Mono Icon theme"
+msgstr "Téma ikon Tango"
+
+#. description(ubuntu-themes:ubuntu-mono-icon-theme)
+msgid "Dark and Light panel icons to make desktop beautiful."
msgstr ""
-#. summary(texlive-showexpl)
+#. summary(udev-persistent-ifnames)
#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Typesetting LaTeX source code"
-msgstr "Zpracování XML pomocí TeXu"
+#| msgid "A portable interface for writing games"
+msgid "Persistent classic network interface naming scheme"
+msgstr "Přenositelné rozhraní pro tvorbu her"
-#. summary(texlive-lsc)
-msgid "Typesetting Live Sequence Charts"
+#. description(udev-persistent-ifnames)
+msgid ""
+"This package, when installed, disables the default \"Predictable Network Interface Naming\" scheme[PNIN] in udev, and switches it to a first-loaded-first-named, reboot-persistent scheme.\n"
+"\n"
+"[PNIN] http://freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/\n"
+"\n"
+"Differences from PNIN:\n"
+"* Re-enumeration when the L2 address changes.\n"
+"* Interface names are not - and cannot be - derived from another property like PCI bus address."
msgstr ""
-#. summary(texlive-vdmlisting)
-msgid "Typesetting VDM in ASCII syntax"
+#. summary(udisks2:udisks2-lang)
+msgid "Languages for package udisks2"
+msgstr "Jazykový balíček pro udisks2"
+
+#. description(udisks2:udisks2-lang)
+msgid "Provides translations to the package udisks2"
msgstr ""
-#. summary(texlive-zed-csp)
-msgid "Typesetting Z and CSP format specifications"
+#. summary(ufraw:ufraw-lang)
+msgid "Languages for package ufraw"
+msgstr "Jazykový balíček pro ufraw"
+
+#. description(ufraw:ufraw-lang)
+msgid "Provides translations to the package ufraw"
msgstr ""
-#. summary(texlive-philosophersimprint)
-msgid "Typesetting articles for \"Philosophers' Imprint\""
+#. description(ufw)
+msgid "The Uncomplicated Firewall(ufw) is a front-end for netfilter, which aims to make it easier for people unfamiliar with firewall concepts. Ufw provides a framework for managing netfilter as well as manipulating the firewall."
msgstr ""
-#. summary(texlive-menu)
+#. summary(ufw:ufw-lang)
#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Typesetting menus"
-msgstr "Zpracování XML pomocí TeXu"
+#| msgid "Languages for package ufraw"
+msgid "Languages for package ufw"
+msgstr "Jazykový balíček pro ufraw"
-#. summary(texlive-program)
-msgid "Typesetting programs and algorithms"
+#. description(ufw:ufw-lang)
+#, fuzzy
+msgid "Provides translations to the package ufw"
+msgstr "Dokumentace pro castor"
+
+#. summary(uhd:uhd-doc)
+#, fuzzy
+#| msgid "Documentation files for unzip"
+msgid "Documentation files for uhd"
+msgstr "Dokumentace programu unzip"
+
+#. description(uhd:uhd-doc)
+#, fuzzy
+msgid "This package contains the documentation for the Universal Hardware Driver (UHD)."
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(uhd:uhd-firmware)
+#, fuzzy
+#| msgid "Firmware Data Files for ALSA"
+msgid "Firmware images for uhd"
+msgstr "Firmware pro systém ALSA"
+
+#. description(uhd:uhd-firmware)
+#, fuzzy
+#| msgid "This package contains the documentation for AdaptX."
+msgid "This package contains binary firmware images for the Universal Hardware Driver (UHD)."
+msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#. summary(ullae-veliyae)
+msgid "UV - Realtime graph of I/O per process"
msgstr ""
-#. summary(texlive-sffms)
-msgid "Typesetting science fiction/fantasy manuscripts"
+#. description(ullae-veliyae)
+msgid ""
+"UV - Realtime graph of I/O per process.\n"
+"\n"
+"Signed-off-by: Nikanth Karthikesan Sponsored by Novell, during openSUSE Hackweek, 20-24 July, 2009.\n"
+"\n"
+"Ullae-veliyae are Tamil words for In-Out. For Input/Output, it would be Ulleedu/Veliyeedu.\n"
+"\n"
+"WARNING: Use this tool at your own risk, data accuracy not guaranteed!!"
msgstr ""
-#. summary(texlive-plari)
-msgid "Typesetting stageplay scripts"
+#. summary(unbound:unbound-munin)
+msgid "Plugin for the munin / munin-node monitoring package"
msgstr ""
-#. summary(texlive-tabvar)
-msgid "Typesetting tables showing variations of functions"
+#. description(unbound:unbound-munin)
+msgid ""
+"Unbound is a validating, recursive, and caching DNS(SEC) resolver.\n"
+"\n"
+"This package holds the plugin for the munin / munin-node monitoring package"
msgstr ""
-#. summary(texlive-iso10303)
-msgid "Typesetting the STEP standards"
+#. summary(unidings-fonts)
+msgid "Font with Basic Icon Glyphs"
msgstr ""
-#. summary(texlive-unitsdef)
-#, fuzzy
-#| msgid "Typesetting XML with TeX"
-msgid "Typesetting units in LaTeX"
-msgstr "Zpracování XML pomocí TeXu"
+#. description(unidings-fonts)
+msgid "Unidings contains glyphs that may be used in a Last Resort font, as well as icon glyphs for control and special characters, encoded in F200..F3B4 and F400..F5B4 of the Private Use Area in BMP. Block names are from “Roadmaps, a snapshot as of 2011-05-30”, http://std.dkuug.dk/JTC1/SC2/WG2/docs/n4056.htm"
+msgstr ""
-#. description(texlive-siunitx)
+#. summary(unifraktur-fonts)
+msgid "Fonts from the UniFraktur project"
+msgstr ""
+
+#. description(unifraktur-fonts)
msgid ""
-"Typesetting values with units requires care to ensure that the combined mathematical meaning of the value plus unit combination is clear. In particular, the SI units system lays down a consistent set of units with rules on how they are to be used. However, different countries and publishers have differing conventions on the exact appearance of numbers (and units). A number of LaTeX packages have been developed to provide consistent application of the various rules: SIunits, sistyle, unitsdef and units are the leading examples. The numprint package provides a large number of number-related functions, while dcolumn and rccol provide tools for typesetting tabular numbers. The siunitx package takes the best from the existing packages, and adds new features and a consistent interface. A number of new ideas have been incorporated, to fill gaps in the existing provision. The package also provides backward-compatibility with SIunits, sistyle, unitsdef and units. The aim is to have one pack
age to handle all of the possible unit-related needs of LaTeX users. The package relies on LaTeX 3 support from the l3kernel and l3packages bundles.\n"
+"Unifraktur provides a number of Fraktur blackletter font faces that are optimized for @font-face embedding with CSS.\n"
"\n"
-"date: 2013-03-12 09:55:10 +0000"
+"UnifrakturMaguntia is a weight-400 font baſed on Peter Wiegel’s font \"Berthold Mainzer Fraktur\".\n"
+"\n"
+"UnifrakturCook is a weight-700 font baſed on Peter Wiegel’s \"Koch Fette Deutſche Schrift\". UnifrakturCook uſes the wideſt poſſible range of modern ſmart font technologies for diſplaying the font’s ligatures, OpenType, Apple Advanced Typography (AAT) and SIL Graphite."
msgstr ""
-#. description(texlive-upquote)
+#. summary(upower:upower-lang)
+msgid "Languages for package upower"
+msgstr "Jazykový balíček pro upower"
+
+#. description(upower:upower-lang)
+msgid "Provides translations to the package upower"
+msgstr ""
+
+#. summary(urlwatch)
+#, fuzzy
+#| msgid "A tool for finding package information"
+msgid "A tool for monitoring webpages for updates"
+msgstr "Nástroj pro získání informací o balících"
+
+#. description(urlwatch)
msgid ""
-"Typewriter-style fonts are best for program listings, but Computer Modern Typewriter prints ` and ' as bent opening and closing single quotes. Other fonts, and most programming languages, print ` as a grave accent and ' upright; ' is used both to open and to close quoted strings. The package switches the typewriter font to Computer Modern Typewriter in OT1 encoding, and modifies the behaviour of verbatim, verbatim*, \\verb, and \\verb* to print in the \"` and ' way\". It does thisregardless of other fonts or encodings in use, so long as the package is loaded after the other fonts were. The package does not affect \\tt, \\texttt, etc.\n"
+"urlwatch is intended to help you watch URLs and get notified (via email or in your terminal) of any changes. The change notification will include the URL that has changed and a unified diff of what has changed.\n"
"\n"
-"date: 2012-04-19 18:55:14 +0000"
+"The script supports the use of a filtering hook function to strip trivially-varying elements of a webpage."
msgstr ""
-#. summary(typo3-cms-4_5)
-msgid "Typo3 CMS v4.5"
+#. summary(uthash)
+msgid "Hash Table for C Structures"
msgstr ""
-#. summary(typo3-cms-4_7)
-msgid "Typo3 CMS v4.7"
+#. description(uthash)
+msgid "Any C structure can be stored in a hash table using uthash. Just add a UT_hash_handle to the structure and choose one or more fields in your structure to act as the key. Then use these macros to store, retrieve or delete items from the hash table."
msgstr ""
-#. summary(typo3-flow-1_1)
-msgid "Typo3 FLOW Enterprise Web Application Framework"
+#. summary(util-linux:util-linux-lang)
+msgid "Languages for package util-linux"
+msgstr "Jazykový balíček pro util-linux"
+
+#. description(util-linux:util-linux-lang)
+msgid "Provides translations to the package util-linux"
msgstr ""
-#. description(typo3-flow-1_1)
+#. summary(vacuum-im:vacuum-im-lang)
+msgid "Languages for package vacuum-im"
+msgstr "Jazykový balíček pro vacuum-im"
+
+#. description(vacuum-im:vacuum-im-lang)
+#, fuzzy
+msgid "Provides translations to the package vacuum-im"
+msgstr "Poskytuje překlady k balíčku compiz"
+
+#. summary(vala-panel-extras:vala-panel-extras-lang)
+#, fuzzy
+#| msgid "Languages for package anjuta-extras"
+msgid "Languages for vala-panel extras"
+msgstr "Jazykový balíček pro anjuta-extras"
+
+#. description(vala-panel-extras:vala-panel-extras-lang)
+#, fuzzy
+#| msgid "Provides translations to the package brasero"
+msgid "Provides translations to the vala-panel extras."
+msgstr "Poskytuje překlady k balíčku brasero"
+
+#. summary(vala-panel-extras:vala-panel-extras-xkb-flags)
+msgid "Flags for vala-panel-extras-xkb"
+msgstr ""
+
+#. description(vala-panel-extras:vala-panel-extras-xkb-flags)
+msgid "This package contains language flags for a vala-panel-extras-xkb package."
+msgstr ""
+
+#. summary(vala-panel:vala-panel-lang)
+#, fuzzy
+#| msgid "Languages for package lxpanel"
+msgid "Languages for package vala-panel"
+msgstr "Jazykový balíček pro lxpanel"
+
+#. description(vala-panel:vala-panel-lang)
+#, fuzzy
+msgid "Provides translations to the package vala-panel"
+msgstr "Dokumentace pro castor"
+
+#. summary(vala-panel-plugin-sntray:vala-panel-plugin-sntray-lang)
+#, fuzzy
+#| msgid "Languages for package xfce4-panel-plugin-sensors"
+msgid "Languages for package vala-panel-plugin-sntray"
+msgstr "Jazykový balíček pro xfce4-panel-plugin-sensors"
+
+#. description(vala-panel-plugin-sntray:vala-panel-plugin-sntray-lang)
+#, fuzzy
+msgid "Provides translations to the packages vala-panel-plugin-sntray and xfce4-panel-plugin-sntray."
+msgstr "Dokumentace pro castor"
+
+#. summary(variety)
+#, fuzzy
+msgid "Wallpaper changer"
+msgstr "KScreensaver"
+
+#. description(variety)
msgid ""
-"Typo3 FLOW is a web application platform enabling developers creating excell ent web solutions and bring back the joy of coding.\n"
+"Variety changes the desktop wallpaper on a regular basis, using user-specified or automatically downloaded images.\n"
"\n"
-"It gives you fast results. It is a reliable foundation for complex applications. And it is backed by one of the biggest PHP communities.\n"
+"Variety sits conveniently as an indicator in the panel and can be easily paused and resumed. The mouse wheel can be used to scroll wallpapers back and forth until you find the perfect one for your current mood.\n"
"\n"
-"Typo3 FLOW is not a pick'n'mix store of motley components. It's a framework which helps you with the infrastructure of your application. Object Lifecycle Management, Package Management, Resource Management and Security are on it's home field. Real business logic is left to custom packages.\n"
-"\n"
-"Whenever possible, Typo3 FLOW analyzes your code for choosing the right configuration for you. Clear conventions and an intuitive API let you concentrate on the essential parts of your application. After all you want to write PHP and not XML, YAML, INI, don't you?\n"
-"\n"
-"Well-proven concepts from various frameworks, applications and programming languages were considered for the design of Typo3 FLOW. Techniques like Dependency Injection and Aspect-Oriented Programming open up new ways of developing PHP applications. But instead of just copying other solutions, the concepts have been carefully adapted to fit the \"Typo3 FLOW feeling\".\n"
-"\n"
-"Typo3 FLOW was created as the foundation of the next generation Typo3 CMS called Typo3 neos. Applications based on Typo3 FLOW can be used as a plugin in TYPO3 or serve as standalone solutions, completely independent from the CMS. By using FLOW3 as an application platform, you get a CMS on top!"
+"Apart from displaying images from local folders, several different online sources can be used to fetch wallpapers according to user-specified criteria."
msgstr ""
-#. summary(typo3-manager)
+#. summary(vcron)
+msgid "TK-Interface for cron and at"
+msgstr "Tk rozhraní pro programy cron a at"
+
+#. description(vcron)
+msgid "TK-Interface for cron and at."
+msgstr "Tk rozhraní pro programy cron a at."
+
+#. description(vdr:vdr-devel-doc)
#, fuzzy
-#| msgid "A Job Manager"
-msgid "Typo3 Manager"
-msgstr "Plánovač úloh"
+msgid "API documentation for VDR."
+msgstr "log4j dokumentace."
-#. description(typo3-manager)
-msgid "Typo3 Manager is a management utility for instances of Typo3 products."
+#. summary(vdr:vdr-lang)
+#, fuzzy
+#| msgid "Languages for package dar"
+msgid "Languages for package vdr"
+msgstr "Jazykový balíček pro dar"
+
+#. description(vdr:vdr-lang)
+#, fuzzy
+#| msgid "Provides translations to the package dcraw"
+msgid "Provides translations to the package vdr"
+msgstr "Poskytuje překlady k balíčku dcraw"
+
+#. summary(vegastrike-data)
+#, fuzzy
+#| msgid "Data Files for glest"
+msgid "Data files for Vega Strike"
+msgstr "Datové soubory pro glest"
+
+#. description(vegastrike-data)
+msgid "Data files for Vega Strike, a GPL 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt."
msgstr ""
-#. summary(texlive-uspatent)
-msgid "U.S. Patent Application Tools for LaTeX and LyX"
+#. summary(vegastrike-extra)
+msgid "Extra textures and content for Vega Strike"
msgstr ""
-#. summary(texlive-uiucthesis)
-msgid "UIUC thesis class"
+#. description(vegastrike-extra)
+msgid ""
+"Extra, optional texture files and content for Vega Strike, a GPL 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt.\n"
+"\n"
+"This package is not essential for playing the game."
msgstr ""
-#. summary(texlive-uml)
-msgid "UML diagrams in LaTeX"
+#. summary(vegastrike-music)
+msgid "Music for Vega Strike"
msgstr ""
-#. summary(texlive-pst-uml)
-msgid "UML diagrams with PSTricks"
+#. description(vegastrike-music)
+msgid "Music for Vega Strike, a 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt. This archive contains the music files necessary to hear music in VegaStrike. These files are *not* essential to play the game."
msgstr ""
-#. summary(ullae-veliyae)
-msgid "UV - Realtime graph of I/O per process"
+#. summary(vegastrike-speech)
+msgid "Speech files for Vega Strike"
msgstr ""
-#. description(ullae-veliyae)
+#. description(vegastrike-speech)
msgid ""
-"UV - Realtime graph of I/O per process.\n"
+"Optional speech files, so you can hear characters speak, for Vega Strike, a GPL 3D OpenGL Action RPG space sim that allows a player to trade and bounty hunt.\n"
"\n"
-"Signed-off-by: Nikanth Karthikesan Sponsored by Novell, during openSUSE Hackweek, 20-24 July, 2009.\n"
-"\n"
-"Ullae-veliyae are Tamil words for In-Out. For Input/Output, it would be Ulleedu/Veliyeedu.\n"
-"\n"
-"WARNING: Use this tool at your own risk, data accuracy not guaranteed!!"
+"This package is not required to play Vega Strike."
msgstr ""
-#. description(texlive-lshort-ukr)
-msgid ""
-"Ukrainian version of A Short Introduction to LaTeX2e.\n"
-"\n"
-"date: 2008-08-22 08:50:40 +0000"
+#. summary(velocity)
+msgid "Java-based template engine"
msgstr ""
-#. summary(texlive-lshort-ukr)
-msgid "Ukrainian version of the LaTeX introduction"
+#. description(velocity)
+#. description(velocity:velocity-demo)
+#. description(velocity:velocity-javadoc)
+#. description(velocity:velocity-manual)
+msgid "Velocity is a Java-based template engine. It permits anyone to use the simple yet powerful template language to reference objects defined in Java code. When Velocity is used for web development, Web designers can work in parallel with Java programmers to develop web sites according to the Model-View-Controller (MVC) model, meaning that web page designers can focus solely on creating a site that looks good, and programmers can focus solely on writing top-notch code. Velocity separates Java code from the web pages, making the web site more maintainable over the long run and providing a viable alternative to Java Server Pages (JSPs) or PHP. Velocity's capabilities reach well beyond the realm of web sites; for example, it can generate SQL and PostScript and XML (see Anakia for more information on XML transformations) from templates. It can be used either as a standalone utility for generating source code and reports, or as an integrated component of other systems. Velocity also p
rovides template services for the Turbine web application framework. Velocity+Turbine provides a template service that will allow web applications to be developed according to a true MVC model."
msgstr ""
-#. summary(texlive-umoline)
-msgid "Underline text allowing line breaking"
+#. summary(velocity:velocity-demo)
+msgid "Demo for velocity"
msgstr ""
-#. summary(texlive-underlin)
-msgid "Underlined running heads"
+#. summary(velocity:velocity-javadoc)
+msgid "Javadoc for velocity"
msgstr ""
-#. summary(texlive-xetex)
-msgid "Unicode and OpenType-enabled TeX engine"
+#. summary(velocity:velocity-manual)
+msgid "Manual for velocity"
msgstr ""
-#. summary(texlive-unicode-math)
+#. summary(verilator:verilator-doc)
#, fuzzy
-msgid "Unicode mathematics support for XeTeX and LuaTeX"
-msgstr "Podpora Unicode pro LaTeX"
+#| msgid "Documentation for castor"
+msgid "Documentation for verilator in HTML format"
+msgstr "Dokumentace pro castor"
-#. summary(texlive-uptex)
-msgid "Unicode version of pTeX"
+#. description(verilator:verilator-doc)
+msgid ""
+"Verilator is the fastest free Verilog HDL simulator.\n"
+"\n"
+"This package contains documentation for verilator in HTML format."
msgstr ""
-#. description(unidings-fonts)
-msgid "Unidings contains glyphs that may be used in a Last Resort font, as well as icon glyphs for control and special characters, encoded in F200..F3B4 and F400..F5B4 of the Private Use Area in BMP. Block names are from “Roadmaps, a snapshot as of 2011-05-30”, http://std.dkuug.dk/JTC1/SC2/WG2/docs/n4056.htm"
-msgstr ""
+#. summary(verilator:verilator-doc-pdf)
+#, fuzzy
+#| msgid "Documentation for castor"
+msgid "Documentation for verilator in PDF format"
+msgstr "Dokumentace pro castor"
-#. description(unifraktur-fonts)
+#. description(verilator:verilator-doc-pdf)
msgid ""
-"Unifraktur provides a number of Fraktur blackletter font faces that are optimized for @font-face embedding with CSS.\n"
+"Verilator is the fastest free Verilog HDL simulator.\n"
"\n"
-"UnifrakturMaguntia is a weight-400 font baſed on Peter Wiegel’s font \"Berthold Mainzer Fraktur\".\n"
-"\n"
-"UnifrakturCook is a weight-700 font baſed on Peter Wiegel’s \"Koch Fette Deutſche Schrift\". UnifrakturCook uſes the wideſt poſſible range of modern ſmart font technologies for diſplaying the font’s ligatures, OpenType, Apple Advanced Typography (AAT) and SIL Graphite."
+"This package contains documentation for verilator in PDF format."
msgstr ""
-#. summary(texlive-subdepth)
-msgid "Unify maths subscript height"
+#. summary(verilator:verilator-examples)
+#, fuzzy
+msgid "Examples for verilator"
+msgstr "Příklady skriptů pro Ruby"
+
+#. description(verilator:verilator-examples)
+msgid ""
+"Verilator is the fastest free Verilog HDL simulator.\n"
+"\n"
+"This package contains examples of using verilator."
msgstr ""
-#. description(vim-plugins:vim-plugin-utl)
-msgid "Universal text link allows you to set hyperlinks within your text documents. Hyperlinks can be used to start applications, open related documents, or bookmark parts of your text document."
+#. summary(vifm-colors)
+#, fuzzy
+#| msgid "Sound themes for KDE"
+msgid "Color themes for vifm"
+msgstr "Zvukové motivy pro KDE"
+
+#. description(vifm-colors)
+msgid "Color themes for vifm file manager."
msgstr ""
-#. summary(vim-plugins:vim-plugin-utl)
-msgid "Universal text linking for vim"
+#. summary(vim-plugins:vim-plugin-NERDcommenter)
+msgid "A plugin that allows for easy commenting of code for many filetypes"
msgstr ""
-#. summary(texlive-uaclasses)
-msgid "University of Arizona thesis and dissertation format"
+#. description(vim-plugins:vim-plugin-NERDcommenter)
+msgid "The NERD commenter provides many different commenting operations and styles which may be invoked via key mappings and a commenting menu. These operations are available for most filetypes."
msgstr ""
-#. summary(texlive-ucthesis)
-msgid "University of California thesis format"
+#. summary(vim-plugins:vim-plugin-NERDtree)
+msgid "A tree explorer plugin for navigating the filesystem"
msgstr ""
-#. summary(texlive-umich-thesis)
-msgid "University of Michigan Thesis LaTeX class"
+#. description(vim-plugins:vim-plugin-NERDtree)
+msgid "The NERD tree allows you to explore your filesystem and to open files and directories. It presents the filesystem to you in the form of a tree which you manipulate with the keyboard and/or mouse. It also allows you to perform simple filesystem operations."
msgstr ""
-#. summary(texlive-soton)
-msgid "University of Southampton-compliant slides"
+#. summary(vim-plugins:vim-plugin-a)
+msgid "Alternate files quickly"
msgstr ""
-#. summary(texlive-ut-thesis)
-msgid "University of Toronto thesis style"
+#. description(vim-plugins:vim-plugin-a)
+msgid "Vim plugin to quickly switch between corresponding files. E.g. if you are editing foo.c and need to edit foo.h simply execute :A and you will be editing foo.h, to switch back to foo.c execute :A again. It has builtin support for C, C++ and ADA95 and can be configured to support a variety of languages."
msgstr ""
-#. summary(texlive-uwthesis)
-msgid "University of Washington thesis class"
+#. summary(vim-plugins:vim-plugin-ack)
+msgid "Run the ack search tool from Vim"
msgstr ""
-#. summary(texlive-splitindex)
-msgid "Unlimited number of indexes"
+#. description(vim-plugins:vim-plugin-ack)
+#. description(vim-plugins:vim-plugin-ag)
+msgid "Run the ack search tool from Vim, with enhanced results listing."
msgstr ""
-#. summary(texlive-latex2e-help-texinfo)
-msgid "Unoffical reference manual covering LaTeX2e"
+#. summary(vim-plugins:vim-plugin-ag)
+msgid "Run the ag (the_silver_search) search tool from Vim"
msgstr ""
-#. summary(texlive-serbian-date-lat)
-msgid "Updated date typesetting for Serbian"
+#. summary(vim-plugins:vim-plugin-align)
+msgid "Plugin to produce aligned text, equations, declarations, etc"
msgstr ""
-#. summary(texlive-mdputu)
-msgid "Upright digits in Adobe Utopia Italic"
+#. description(vim-plugins:vim-plugin-align)
+msgid "Align lets you align statements on their equal signs, make comment boxes, align comments, align declarations, etc. It handles alignment on multiple separators, not just the first one, and the separators may be the same across the line or different."
msgstr ""
-#. summary(texlive-textgreek)
-msgid "Upright greek letters in text"
+#. summary(vim-plugins:vim-plugin-bufexplorer)
+msgid "Buffer Explorer / Browser"
msgstr ""
-#. summary(xfce4-panel:xfce4-panel-branding-upstream)
-msgid "Upstream Branding for xfce4-panel"
+#. description(vim-plugins:vim-plugin-bufexplorer)
+msgid "With bufexplorer, you can quickly switch between buffers by using '\\be' to open the explorer.vim. Then by using the normal movement keys or mouse to select the needed buffer and then finally pressing <Enter> or <Left Mouse Click> to open the buffer in the current window or <Shift Enter> or 't' to open that buffer in a new tab. If the buffer is in another tab already, bufexplorer can switch to that tab if you would like."
msgstr ""
-#. summary(thunar-volman:thunar-volman-branding-upstream)
-msgid "Upstream Branding of thunar-volman"
+#. summary(vim-plugins:vim-plugin-calendar)
+msgid "Calendar for vim"
msgstr ""
-#. summary(xfce4-notifyd:xfce4-notifyd-branding-upstream)
-msgid "Upstream Branding of xfce4-notifyd"
+#. description(vim-plugins:vim-plugin-calendar)
+msgid "Plugin for vim that displays simple calendar in the side window."
msgstr ""
-#. summary(xfce4-power-manager:xfce4-power-manager-branding-upstream)
-msgid "Upstream Branding of xfce4-power-manager"
+#. summary(vim-plugins:vim-plugin-colorschemes)
+msgid "Vim color schemes selection"
msgstr ""
-#. summary(xfce4-session:xfce4-session-branding-upstream)
-msgid "Upstream Branding of xfce4-session"
+#. description(vim-plugins:vim-plugin-colorschemes)
+msgid "Selection of vim color schemes based on Colors Sample Pack - http://www.vim.org/scripts/script.php?script_id=625."
msgstr ""
-#. summary(xfce4-settings:xfce4-settings-branding-upstream)
-msgid "Upstream Branding of xfce4-settings"
+#. summary(vim-plugins:vim-plugin-colorsel)
+msgid "A RGB/HSV color selector"
msgstr ""
-#. summary(xfwm4:xfwm4-branding-upstream)
-msgid "Upstream Branding of xfwm4"
+#. description(vim-plugins:vim-plugin-colorsel)
+msgid "A simple interactive RGB/HSV color selector modelled after Gimp2 RGB/HSV color selector."
msgstr ""
-#. summary(texlive-libgreek)
-msgid "Use Libertine or Biolinum Greek glyphs in mathematics"
+#. summary(vim-plugins:vim-plugin-diffchanges)
+msgid "Show changes since the last save"
msgstr ""
-#. summary(texlive-luamplib)
-msgid "Use LuaTeX's built-in MetaPost interpreter"
+#. description(vim-plugins:vim-plugin-diffchanges)
+msgid "Show changes made to current buffer since the last save. This plugin is based from an example in the Hacking Vim book. The differences are that this functionality is in the form of a plugin, is a bit more robust, and can be toggled."
msgstr ""
-#. summary(texlive-ocgx)
-msgid "Use OCGs within a PDF document without JavaScript"
+#. summary(vim-plugins:vim-plugin-gitdiff)
+msgid "Show git diff in a split window"
msgstr ""
-#. summary(texlive-pslatex)
-#, fuzzy
-#| msgid "Scalable PostScript Fonts for MetaFont"
-msgid "Use PostScript fonts by default"
-msgstr "Vektorová PostScriptová písma pro MetaFont"
-
-#. summary(texlive-rcs)
-msgid "Use RCS (revision control system) tags in LaTeX documents"
+#. description(vim-plugins:vim-plugin-gitdiff)
+msgid "This script provides two functions to display git diffs in vim. :GITDiff [commitish] Split the vim window vertically, display the HEAD, or some other changeset, version of the file in the split, then diff them. :GITChanges [commitish] Highlight lines that were changed since the HEAD or some other changeset."
msgstr ""
-#. summary(texlive-raleway)
-msgid "Use Raleway with TeX(-alike) systems"
+#. summary(vim-plugins:vim-plugin-gnupg)
+msgid "Plugin for transparent editing of gpg encrypted files"
msgstr ""
-#. summary(texlive-sourcecodepro)
-msgid "Use SourceCodePro with TeX(-alike) systems"
+#. description(vim-plugins:vim-plugin-gnupg)
+msgid "This script implements transparent editing of gpg encrypted files. The filename must have a \".gpg\", \".pgp\" or \".asc\" suffix. When opening such a file the content is decrypted, when opening a new file the script will ask for the recipients of the encrypted file. The file content will be encrypted to all recipients before it is written. The script turns off viminfo and swapfile to increase security."
msgstr ""
-#. summary(texlive-sourcesanspro)
-msgid "Use SourceSansPro with TeX(-alike) systems"
+#. summary(vim-plugins:vim-plugin-latex)
+msgid "A rich set of tools for editing LaTeX"
msgstr ""
-#. summary(texlive-tikzmark)
-msgid "Use TikZ's method of remembering a position on a page"
+#. description(vim-plugins:vim-plugin-latex)
+msgid "Vim-LaTeX (aka LaTeX-suite) is a mature project which aims at bringing together the rich set of LaTeX tools the vim community has produced over the years into one comprehensive package. It provides a set of tools which enable you to do all your LaTeX-ing without needing to quit Vim."
msgstr ""
-#. summary(texlive-urwchancal)
-msgid "Use URW's clone of Zapf Chancery as a maths alphabet"
+#. summary(vim-plugins:vim-plugin-locateopen)
+msgid "Edit file without entering the whole path"
msgstr ""
-#. description(texlive-nolbreaks)
+#. description(vim-plugins:vim-plugin-locateopen)
msgid ""
-"Use \\nolbreaks{some text} to prevent line breaks in \"some text\". This has the advantage over \\mbox{} that glue (rubber space) remains flexible. Most common cases are handled here (\\linebreak is disabled, for example) but spaces hidden in macros or { } can still create break-points.\n"
+"This script uses slocate (or a similar application) to allow the user to open a file without having to enter a path. If multiple files are found the user is given the choice of which file to open.\n"
"\n"
-"date: 2012-06-01 09:46:45 +0000"
+"Usage: :LocateEdit somefile.txt :LocateSplit somefile.txt :LocateSource somefile.vim :LocateRead somefile.txt"
msgstr ""
-#. summary(texlive-xcite)
-msgid "Use citation keys from a different document"
+#. summary(vim-plugins:vim-plugin-matrix)
+msgid "Matrix screensaver for vim"
msgstr ""
-#. summary(texlive-tikz-qtree)
-msgid "Use existing qtree syntax for trees in TikZ"
+#. description(vim-plugins:vim-plugin-matrix)
+msgid "Matrix screensaver for VIM, inspired by Chris Allegretta's cmatrix."
msgstr ""
-#. summary(texlive-mtgreek)
-msgid "Use italic and upright greek letters with mathtime"
+#. summary(vim-plugins:vim-plugin-minibufexpl)
+msgid "Elegant buffer explorer that takes very little screen space"
msgstr ""
-#. summary(texlive-libertine)
-msgid "Use of Linux Libertine and Biolinum fonts with LaTeX"
+#. description(vim-plugins:vim-plugin-minibufexpl)
+msgid "Minibufexplorer allows to quickly switch buffers by double-clicking the appropriate \"tab\". Tabs get updated as buffers are opened and closed. Buffers that are modified get visually marked and buffers that are open in a window get visually marked."
msgstr ""
-#. description(texlive-specs-a)
-msgid "Use one rpm spec file for repackaging the texmf/texmf-dist the several tar balls of TeX Live."
+#. summary(vim-plugins:vim-plugin-multiplesearch)
+msgid "Display multiple searches at the same time"
msgstr ""
-#. summary(texlive-sauterfonts)
-msgid "Use sauter fonts in LaTeX"
+#. description(vim-plugins:vim-plugin-multiplesearch)
+msgid "MultipleSearch allows you to have the results of multiple searches displayed on the screen at the same time. Each search highlights its results in a different color, and all searches are displayed at once. After the maximum number of colors is used, the script starts over with the first color."
msgstr ""
-#. summary(texlive-mathastext)
-msgid "Use the text font in simple mathematics"
+#. summary(vim-plugins:vim-plugin-project)
+msgid "Organize/Navigate projects of files"
msgstr ""
-#. summary(texlive-tpic2pdftex)
-msgid "Use tpic commands in PDFTeX"
+#. description(vim-plugins:vim-plugin-project)
+msgid "You can use this plugin's basic functionality to set up a list of frequently-accessed files for easy navigation. The list of files will be displayed in a window on the left side of the vim window, and you can press <Return> or double-click on filenames in the list to open the files. This is similar to how some IDEs I've used work. I find this easier to use than having to navigate a directory hierarchy with the file-explorer. It also obviates the need for a buffer explorer because you have your list of files on the left of the vim window."
msgstr ""
-#. description(texlive-textgreek)
-msgid ""
-"Use upright greek letters as text symbols, e.g. \\textbeta.\n"
-"\n"
-"date: 2011-10-13 07:47:13 +0000"
+#. summary(vim-plugins:vim-plugin-quilt)
+msgid "Quilt support for vim"
msgstr ""
-#. description(texlive-textmerg)
-msgid ""
-"Useful, for example, in mail merge.\n"
-"\n"
-"date: 2010-12-01 14:56:49 +0000"
+#. description(vim-plugins:vim-plugin-quilt)
+msgid "Vim plugin that helps with quilt operations from inside vim."
msgstr ""
-#. summary(texlive-newfile)
-msgid "User level management of LaTeX input and output"
+#. summary(vim-plugins:vim-plugin-rails)
+msgid "Support for Ruby on Rails development"
msgstr ""
-#. summary(texlive-xecyr)
-msgid "Using Cyrillic languages in XeTeX"
+#. description(vim-plugins:vim-plugin-rails)
+msgid "This plugin offers the many features for Ruby on Rails application development."
msgstr ""
-#. summary(texlive-pawpict)
-msgid "Using graphics from PAW"
+#. summary(vim-plugins:vim-plugin-searchcomplete)
+msgid "Tab completion of words inside of a search"
msgstr ""
-#. summary(texlive-pst-infixplot)
-msgid "Using pstricks plotting capacities with infix expressions rather than RPN"
+#. description(vim-plugins:vim-plugin-searchcomplete)
+msgid "This plugin allows to tab-complete words while typing in a search ('/')."
msgstr ""
-#. summary(texlive-texments)
-msgid "Using the Pygments highlighter in LaTeX"
+#. summary(vim-plugins:vim-plugin-showmarks)
+msgid "Visually shows the location of marks"
msgstr ""
-#. summary(yum-utils)
-msgid "Utilities based around the yum package manager"
-msgstr "Pomocné programy postavené na správci balíků yum"
+#. description(vim-plugins:vim-plugin-showmarks)
+msgid "ShowMarks provides a visual representation of the location marks. Marks are useful for jumping back and forth between interesting points in a buffer, but can be hard to keep track of without any way to see where you have placed them. ShowMarks hopefully makes life easier by placing a sign in the leftmost column of the buffer. The sign indicates the label of the mark and its location. It can be toggled on and off and individual marks can be hidden."
+msgstr ""
-#. summary(texlive-seetexk)
-#, fuzzy
-#| msgid "Utilities for Manipulating Desktop Files"
-msgid "Utilities for manipulating DVI files"
-msgstr "Nástroje pro manipulaci s desktop soubory"
+#. summary(vim-plugins:vim-plugin-snipmate)
+msgid "Implements some of TextMate's snippets features in Vim"
+msgstr ""
+#. description(vim-plugins:vim-plugin-snipmate)
+msgid ""
+"snipMate aims to be an unobtrusive, concise vim script that implements some of TextMate's snippets features in Vim. A snippet is a piece of often-typed text that you can insert into your document using a trigger word followed by a <tab>.\n"
+"\n"
+"For instance, in a C file using the default installation of snipMate.vim, if you type \"for<tab>\" in insert mode, it will expand a typical for loop in C:\n"
+"\n"
+"for (i = 0; i < count; i++) { }"
+msgstr ""
+
+#. summary(vim-plugins:vim-plugin-supertab)
+msgid "Easy insert mode completion with Tab key"
+msgstr ""
+
+#. description(vim-plugins:vim-plugin-supertab)
+msgid "This script allows you to use the tab key to do all your insert completion."
+msgstr ""
+
+#. summary(vim-plugins:vim-plugin-taglist)
+msgid "Source code browser with support for many languages"
+msgstr ""
+
+#. description(vim-plugins:vim-plugin-taglist)
+msgid "The \"Tag List\" plugin is a source code browser plugin for Vim and provides an overview of the structure of source code files and allows you to efficiently browse through source code files for different programming languages."
+msgstr ""
+
#. summary(vim-plugins:vim-plugin-tlib)
msgid "Utility functions for vim"
msgstr ""
-#. summary(texlive-ifnextok)
-msgid "Utility macro: peek ahead without ignoring spaces"
+#. description(vim-plugins:vim-plugin-tlib)
+msgid "This library provides some utility functions. There isn't much need to install it unless another plugin requires you to do so."
msgstr ""
-#. summary(texlive-texware)
-#, fuzzy
-#| msgid "KDE utility programs for laptop users"
-msgid "Utility programs for use with TeX"
-msgstr "Pomocné programu pro laptopy v KDE"
+#. summary(vim-plugins:vim-plugin-tregisters)
+msgid "List, edit, and run/execute registers/clipboards"
+msgstr ""
-#. summary(weather-wallpaper)
-msgid "Utility to create a wallpaper based on the current weather"
+#. description(vim-plugins:vim-plugin-tregisters)
+msgid "List, edit, and run or execute registers and/or clipboards"
msgstr ""
-#. summary(zvbi:zvbi-devel-32bit)
-msgid "VBI decoding library - devel package"
-msgstr "VBI dekodér - vývojářský balík"
+#. summary(vim-plugins:vim-plugin-tselectbuffer)
+msgid "A quick buffer selector/switcher"
+msgstr ""
-#. summary(texlive-verbasef)
-msgid "VERBatim Automatic Splitting of External Files"
+#. description(vim-plugins:vim-plugin-tselectbuffer)
+msgid "This plugin provides a simple buffer selector. It doesn't have all the features other buffer selectors have but can be useful for quickly switching to a different buffer or for deleting buffers."
msgstr ""
-#. description(texlive-vpe)
-msgid ""
-"VPE is a system to make the equivalent of \"source special\" marks in a PDF file. Clicking on a mark will activate an editor, pointing at the source line that produced the text that was marked. The system comprises a perl file (vpe.pl) and a LaTeX package (vpe.sty); it will work with PDF files generated via LaTeX/dvips, pdfTeX (version 0.14 or better), and LaTeX/VTeX. Using the LaTeX/dvips or pdfLaTeX routes, the (pdf)TeX processor should be run with shell escapes enabled.\n"
-"\n"
-"date: 2012-04-18 14:26:37 +0000"
+#. summary(vim-plugins:vim-plugin-tselectfiles)
+msgid "A quick file selector/browser/explorer"
msgstr ""
-#. summary(texlive-vwcol)
-msgid "Variable-width multiple text columns"
+#. description(vim-plugins:vim-plugin-tselectfiles)
+msgid "This plugin provides a simple file browser. It is not a full blown explorer but can be nevertheless be useful for quickly selecting a few files or renaming them."
msgstr ""
-#. summary(texlive-show2e)
-msgid "Variants of \\show for LaTeX2e"
+#. summary(vim-plugins:vim-plugin-utl)
+msgid "Universal text linking for vim"
msgstr ""
-#. summary(texlive-realboxes)
-msgid "Variants of common box-commands that read their content as real box and not as macro argument"
+#. description(vim-plugins:vim-plugin-utl)
+msgid "Universal text link allows you to set hyperlinks within your text documents. Hyperlinks can be used to start applications, open related documents, or bookmark parts of your text document."
msgstr ""
-#. summary(texlive-pageslts)
-msgid "Variants of last page labels"
+#. summary(vim-plugins:vim-plugin-vimwiki)
+msgid "Personal wiki for vim"
msgstr ""
-#. summary(texlive-showdim)
-msgid "Variants on printing dimensions"
+#. description(vim-plugins:vim-plugin-vimwiki)
+msgid "Vimwiki is a personal wiki for Vim. Using it you can organize text files with hyperlinks. To do a quick start press <Leader>ww (this is usually \\ww) to go to your index wiki file. By default it is located in ~/vimwiki/index.wiki. You do not have to create it manually - vimwiki can make it for you."
msgstr ""
-#. summary(texlive-multiexpand)
-msgid "Variations on the primitive command \\expandafter"
+#. summary(vim-plugins:vim-plugin-zoomwin)
+msgid "Zoom in/out of windows (toggle between one window and multi-window)"
msgstr ""
-#. summary(texlive-ms)
-msgid "Various LaTeX packages by Martin Schroder"
+#. description(vim-plugins:vim-plugin-zoomwin)
+msgid ""
+"The idea is to make it easy to zoom into and out of a window. Usage:\n"
+"\n"
+" Press <c-w>o : the current window zooms into a full screen Press <c-w>o again: the previous set of windows is restored"
msgstr ""
-#. summary(texlive-sttools)
+#. summary(vino:vino-lang)
+msgid "Languages for package vino"
+msgstr "Jazykový balíček pro vino"
+
+#. description(vino:vino-lang)
+msgid "Provides translations to the package vino"
+msgstr ""
+
+#. summary(vips:vips-doc)
#, fuzzy
-#| msgid "Various ALSA Tools"
-msgid "Various macros"
-msgstr "Různé nástroje pro ALSA"
+msgid "Documentation for VIPS library"
+msgstr "Dokumentace pro adaptx"
-#. summary(texlive-locality)
-msgid "Various macros for keeping things local"
+#. description(vips:vips-doc)
+#, fuzzy
+#| msgid "This package contains [pkg://wxGTK] documentation in HTML and PDF formats."
+msgid "This package contains documentation about VIPS library in HTML and PDF formats."
+msgstr "Tento balíček obsahuje dokumentaci pro [pkg://wxGTK] ve formátech PDF a HTML."
+
+#. summary(virtaal)
+msgid "Localization and translation editor"
msgstr ""
-#. description(texlive-vaucanson-g)
+#. description(virtaal)
msgid ""
-"VauCanSon-G is a package that enables the user to draw automata within texts written using LaTeX. The package macros make use of commands of PStricks\n"
+"A program for Computer Aided Translation (CAT) and localization.\n"
"\n"
-"date: 2008-10-30 08:45:25 +0000"
+"Virtaal includes features that allow a localizer to work effectively including: syntax highlighting, autocomplete and autocorrect. By showing only the data that is needed through its simple and effective user interface it ensures that translators can focus on their current translation task.\n"
+"\n"
+"A rich set of Translation Memory (TM) plugins provide valuable suggestions to the translator from sources such as Open-Tran.eu, the current file, and the translators own TM server. Similarly Machine Translation (MT) suggestions can come from Apertium, libtranslate, Google and Moses.\n"
+"\n"
+"The terminology plugin system will provide terminology hints from Open-Tran.eu, local terminology files and remote terminology repositories.\n"
+"\n"
+"Placeholders such as variables, abbreviations, URLs, emails and special punctutions are highlighted for easy insertion into the translations.\n"
+"\n"
+"Virtaal is able to edit any of the following formats: XLIFF, Gettext PO and .mo, Qt .ts, .qph and .qm, Wordfast TM, TMX, OmegaT glossaries and TBX. The Translate Toolkit converters allow translators to edit: OpenDocument Format (ODF), OpenOffice.org SDF, Java (and Mozilla) .properties, Mozilla DTD files, subtitles, and other formats."
msgstr ""
-#. summary(tuxpaint-stamps:tuxpaint-stamps-vehicles)
-msgid "Vehicle stamps collection for Tux Paint"
+#. summary(virtaal:virtaal-lang)
+msgid "Languages for package virtaal"
+msgstr "Jazykový balíček pro virtaal"
+
+#. description(virtaal:virtaal-lang)
+msgid "Provides translations to the package virtaal"
msgstr ""
-#. description(velocity)
-msgid "Velocity is a Java-based template engine. It permits anyone to use the simple yet powerful template language to reference objects defined in Java code. When Velocity is used for web development, Web designers can work in parallel with Java programmers to develop web sites according to the Model-View-Controller (MVC) model, meaning that web page designers can focus solely on creating a site that looks good, and programmers can focus solely on writing top-notch code. Velocity separates Java code from the web pages, making the web site more maintainable over the long run and providing a viable alternative to Java Server Pages (JSPs) or PHP. Velocity's capabilities reach well beyond the realm of web sites; for example, it can generate SQL and PostScript and XML (see Anakia for more information on XML transformations) from templates. It can be used either as a standalone utility for generating source code and reports, or as an integrated component of other systems. Velocity also p
rovides template services for the Turbine web application framework. Velocity+Turbine provides a template service that will allow web applications to be developed according to a true MVC model."
+#. summary(virtualbox:virtualbox-guest-desktop-icons)
+msgid "Icons for guest desktop files"
msgstr ""
-#. summary(texlive-venturisadf)
-msgid "Venturis ADF fonts collection"
+#. description(virtualbox:virtualbox-guest-desktop-icons)
+msgid "This package contains icons for guest desktop files that were created on the desktop."
msgstr ""
-#. description(texlive-verbasef)
+#. summary(virtualbox:virtualbox-host-source)
+msgid "Source files for virtualbox kernel modules"
+msgstr ""
+
+#. description(virtualbox:virtualbox-host-source)
+msgid "Source files for virtualbox kernel modules These can be built for custom kernels using cd /usr/src/kernel-modules/virtualbox ; make ; make install"
+msgstr ""
+
+#. summary(vlc:vlc-noX-lang)
+msgid "Languages for package vlc"
+msgstr ""
+
+#. description(vlc:vlc-noX-lang)
+msgid "Provides translations to the package vlc"
+msgstr ""
+
+#. summary(vollkorn-fonts)
+msgid "An serif font for everyday use"
+msgstr ""
+
+#. description(vollkorn-fonts)
msgid ""
-"Verbasef allows you to input (subsections of a) file, print them in verbatim mode, while automatically breaking up the inputted lines into pieces of a given length, which are output as figures. These figures are posted using the [H] specification, which forces LaTeX to place the figure at the spot of invocation, rather than floating the figures to the top of the next page. The package requires the verbatim, here and vrbexin packages.\n"
+"From the Vollkorn webpage: Vollkorn intends to be a quiet, modest, and well working text face. It has dark and meaty serifs and a bouncing and healthy look. It might be used as body type as well as for headlines or titles.\n"
"\n"
-"date: 2011-04-02 12:59:54 +0000"
+"»Vollkorn« (pronounced »Follkorn«) is German for »wholemeal« which refers to the old term »Brotschrift«."
msgstr ""
-#. summary(texlive-url)
-msgid "Verbatim with URL-sensitive line breaks"
+#. summary(vorbis-tools:vorbis-tools-lang)
+msgid "Languages for package vorbis-tools"
+msgstr "Jazykový balíček pro vorbis-tools"
+
+#. description(vorbis-tools:vorbis-tools-lang)
+msgid "Provides translations to the package vorbis-tools"
msgstr ""
+#. summary(votca-csg:votca-csg-bash)
+msgid "Bash completion for votca"
+msgstr ""
+
+#. description(votca-csg:votca-csg-bash)
+msgid ""
+"Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) is a package intended to reduce the amount of routine work when doing systematic coarse-graining of various systems. The core is written in C++. Iterative methods are implemented using bash + perl.\n"
+"\n"
+"This package contains bash completion support for votca-csg."
+msgstr ""
+
+#. summary(votca-csg:votca-csg-common)
+msgid "Architecture independent data files for VOTCA CSG"
+msgstr ""
+
#. description(votca-csg:votca-csg-common)
msgid ""
"Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) is a package intended to reduce the amount of routine work when doing systematic coarse-graining of various systems. The core is written in C++.\n"
@@ -30075,6 +42865,10 @@
"This package contains architecture independent data files for VOTCA CSG."
msgstr ""
+#. summary(votca-csg:votca-csg-tutorials)
+msgid "Tutorial documentation for VOTCA Coarse Graining Engine"
+msgstr ""
+
#. description(votca-csg:votca-csg-tutorials)
msgid ""
"Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) is a package intended to reduce the amount of routine work when doing systematic coarse-graining of various systems. The core is written in C++.\n"
@@ -30082,164 +42876,484 @@
"This package contains tutorial documentation and sample data"
msgstr ""
-#. description(votca-csg:votca-csg-bash)
+#. summary(vsqlite++:vsqlite++-doc)
+msgid "Development documentation for vsqlite++"
+msgstr ""
+
+#. description(vsqlite++:vsqlite++-doc)
+msgid "This package contains development documentation files for vsqlite++."
+msgstr ""
+
+#. summary(vtcl)
+msgid "Visual Tcl"
+msgstr "Vizuální Tcl"
+
+#. description(vtcl)
+msgid "Visual Tcl is a freely-available, high-quality application development environment for UNIX, Windows, and Macintosh platforms. Writing entirely in Tcl and generating pure Tcl should make porting either unnecessary or trivial."
+msgstr "Visual Tcl je volně dostupné, vysoce kvalitní prostředí pro vývoj aplikací pro platformy Unix, Windows a Macintosh. Je celé napsané v Tcl a generuje čisté Tcl, takže portování aplikací je zbytečné nebo triviální."
+
+#. summary(vte:vte-lang)
+msgid "Languages for package vte"
+msgstr "Jazykový balíček pro vte"
+
+#. description(vte:vte-lang)
+msgid "Provides translations to the package vte"
+msgstr ""
+
+#. summary(vtkdata)
+msgid "Kitware VTK Library Data"
+msgstr ""
+
+#. description(vtkdata)
msgid ""
-"Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) is a package intended to reduce the amount of routine work when doing systematic coarse-graining of various systems. The core is written in C++. Iterative methods are implemented using bash + perl.\n"
+"The Visualization ToolKit (VTK) is an open source, freely available software system for 3D computer graphics, image processing, and visualization used by thousands of researchers and developers around the world.\n"
"\n"
-"This package contains bash completion support for votca-csg."
+"This package contains some example data for the Toolkit."
msgstr ""
-#. summary(texlive-paper)
-msgid "Versions of article class, tuned for scholarly publications"
+#. summary(vusb-analyzer)
+msgid "A tool for viewing USB trace files from usbmon and other usb dump formats"
msgstr ""
-#. description(texlive-ntgclass)
+#. description(vusb-analyzer)
+msgid "The Virtual USB Analyzer is a free and open source tool for visualizing logs of USB packets, from hardware or software USB sniffer tools. The Virtual USB Analyzer is not itself a USB sniffer tool. It is just a user interface for visualizing logs."
+msgstr ""
+
+#. summary(w3c-markup-validator)
+msgid "W3C Markup Validator"
+msgstr ""
+
+#. description(w3c-markup-validator)
+msgid "The W3C Markup Validator checks documents like HTML and XHTML for conformance to W3C Recommendations and other standards."
+msgstr ""
+
+#. summary(w3c-markup-validator:w3c-markup-validator-libs)
+msgid "SGML and XML DTDs for the W3C Markup Validator"
+msgstr ""
+
+#. description(w3c-markup-validator:w3c-markup-validator-libs)
+msgid "SGML and XML DTDs for the W3C Markup Validator."
+msgstr ""
+
+#. summary(w3m-el:w3m-el-xemacs)
+msgid "W3m-el is a simple interface program to use w3m with XEmacs."
+msgstr ""
+
+#. description(w3m-el:w3m-el-xemacs)
msgid ""
-"Versions of the standard LaTeX article and report classes, rewritten to reflect a more European design, by the Dutch TeX Users Group NTG.\n"
+"W3m-el is a simple interface program to use w3m with (X)Emacs.\n"
"\n"
-"date: 2006-12-05 16:23:05 +0000"
+"W3 is the most well known WEB browser which works on (X)Emacs, but it is very slow. w3m-el is a simple and speedy alternative.\n"
+"\n"
+"W3m-el uses w3m, which is a pager with WWW capability, developed by Akinori ITO. It is a pager, but it can be used as a text-mode WWW browser."
msgstr ""
-#. description(texlive-vhistory)
+#. summary(w3mir)
+msgid "HTTP Copying and Mirroring Tool"
+msgstr "Nástroj pro kopírování a zrcadlení pomocí protokolu HTTP"
+
+#. description(w3mir)
msgid ""
-"Vhistory simplifies the creation of a history of versions of a document. You can easily extract information like the current version of a list of authors from that history. It helps you to get consistent documents. The package sets, which is used by vhistory, allows you to use sets containing text. You can use the usual operations to create the union of sets or the intersection of sets etc.\n"
+"w3mir's main focus is to create and maintain a browsable copy of one or several remote World Wide Web sites.\n"
"\n"
-"date: 2013-04-21 14:55:16 +0000"
+"Used to its full potential, w3mir can retrieve the contents of several related sites and leave the mirror browseable via a local web server or from a file system, such as directly from a CD-ROM.\n"
+"\n"
+"w3mir's goal is to be able to make useful mirrors of any reasonable World Wide Web site. It specifically preserves link integrity within the mirrored documents as well as the integrity of links outside the mirror, if you want it to. w3mir has a powerful \"multi scope\" mechanism enabling the user to make mirrors of several related sites and have links between them refer to the mirrored documents rather than the original site. w3mir has several features directed at getting mirrors for CD-ROM burning and the handling of some rare problems when mirroring."
msgstr ""
+"Účelem programu w3mir je vytváření a udržování funkčních kopií jednoho nebo několika vzdálených WWW uzlů.\n"
+"\n"
+"Při využití všech svých možností může w3mir načítat obsah několika spřízněných uzlů tak, aby kopie byla dostupná přes lokální WWW server nebo čtením přímo ze systému souborů, například z CDROM.\n"
+"\n"
+"Cílem w3mir je vytvářet použitelné kopie WWW uzlů. Proto na žádost pečlivě zachovává integritu odkazů v rámci zrcadlených struktur stejně jako integritu odkazů mimo tyto struktury. w3mir má výkonný mechanismus \"více oblastí platnosti\" umožňující, aby při zrcadlení několika souvisejících uzlů odkazy mezi nimi ukazovaly na zrcadlené dokumenty a nikoli na původní uzly. w3mir má několik vlastností, které by měly umožnit vypálení zrcadlených struktur na CDROM a zpracovávání některých méně obvyklých problémů při zrcadlení."
-#. description(texlive-lshort-vietnamese)
+#. summary(waf)
+msgid "A Python-based build system"
+msgstr ""
+
+#. description(waf)
+msgid "Waf is a Python-based framework for configuring, compiling and installing applications. It is a replacement for other tools such as Autotools, Scons, CMake or Ant."
+msgstr ""
+
+#. summary(wammu)
+msgid "Mobile Phone Manager"
+msgstr ""
+
+#. description(wammu)
msgid ""
-"Vietnamese version of A Short Introduction to LaTeX2e.\n"
+"It works with any phone that Gammu supports, including many models from Nokia, Siemens, and Alcatel. It has complete support (read, edit, delete, copy) for contacts, todo, and calendar. It can read, save, and send SMS. It includes an SMS composer for multi-part SMS messages, and it can display SMS messages that include pictures. Currently, only text and predefined bitmaps or sounds can be edited in the SMS composer. It can export messages to an IMAP4 server (or other email storage).\n"
"\n"
-"date: 2007-03-09 11:50:50 +0000"
+"This program does not support browsing files in phone, use gMobileMedia instead."
msgstr ""
-#. summary(texlive-lshort-vietnamese)
-msgid "Vietnamese version of the LaTeX introduction"
+#. summary(wammu:wammu-lang)
+msgid "Languages for package wammu"
+msgstr "Jazykový balíček pro wammu"
+
+#. description(wammu:wammu-lang)
+msgid "Provides translations to the package wammu"
msgstr ""
-#. summary(tkinfo)
-msgid "Viewer for info-files"
+#. summary(wang-fonts)
+msgid "Chinese (Unicode) TrueType fonts by Dr"
msgstr ""
-#. summary(vim-plugins:vim-plugin-colorschemes)
-msgid "Vim color schemes selection"
+#. description(wang-fonts)
+msgid "Chinese (Unicode) TrueType fonts by Dr. Hann-Tzong Wang"
msgstr ""
-#. description(vim-plugins:vim-plugin-quilt)
-msgid "Vim plugin that helps with quilt operations from inside vim."
+#. summary(weather-wallpaper)
+msgid "Utility to create a wallpaper based on the current weather"
msgstr ""
-#. description(vim-plugins:vim-plugin-a)
-msgid "Vim plugin to quickly switch between corresponding files. E.g. if you are editing foo.c and need to edit foo.h simply execute :A and you will be editing foo.h, to switch back to foo.c execute :A again. It has builtin support for C, C++ and ADA95 and can be configured to support a variety of languages."
+#. description(weather-wallpaper)
+msgid "Weather wallpaper is a program which connects to NOAA each hour to get the current weather at the specified location and creates and sets a wallpaper with the data retrieved."
msgstr ""
-#. description(vim-plugins:vim-plugin-latex)
-msgid "Vim-LaTeX (aka LaTeX-suite) is a mature project which aims at bringing together the rich set of LaTeX tools the vim community has produced over the years into one comprehensive package. It provides a set of tools which enable you to do all your LaTeX-ing without needing to quit Vim."
+#. summary(weather-wallpaper:weather-wallpaper-lang)
+msgid "Languages for package weather-wallpaper"
+msgstr "Jazykový balíček pro weather-wallpaper"
+
+#. description(weather-wallpaper:weather-wallpaper-lang)
+msgid "Provides translations to the package weather-wallpaper"
msgstr ""
-#. description(vim-plugins:vim-plugin-vimwiki)
-msgid "Vimwiki is a personal wiki for Vim. Using it you can organize text files with hyperlinks. To do a quick start press <Leader>ww (this is usually \\ww) to go to your index wiki file. By default it is located in ~/vimwiki/index.wiki. You do not have to create it manually - vimwiki can make it for you."
+#. summary(webdot)
+msgid "A CGI graph server script that uses tcldot from graphviz"
msgstr ""
-#. summary(vhba-kmp:vhba-kmp-pae)
-msgid "Virtual SCSI Host Bus adapter"
+#. description(webdot)
+msgid "A cgi-bin program that produces clickable graphs in web pages when provided with an href to a .dot file. Uses Tcldot from the graphviz rpm. By default, only requests from localhost are served."
+msgstr "Program, který funguje jako CGI skript a produkuje klikatelné grafy na WWW stránkách při použití odkazu na .dot soubory. Používá Tcldot z rpm balíku graphviz. Implicitně odpovídá pouze na požadavky z vlastního počítače."
+
+#. summary(webkit-sharp)
+msgid "WebKit bindings for Mono"
msgstr ""
-#. summary(texlive-pxtxalfa)
-msgid "Virtual maths alphabets based on pxfonts and txfonts"
+#. description(webkit-sharp)
+msgid ""
+"WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers.\n"
+"\n"
+"This package provides Mono bindings for WebKit libraries."
msgstr ""
-#. summary(texlive-lua-visual-debug)
-msgid "Visual debugging with LuaLaTeX"
+#. summary(websocketpp:websocketpp-devel)
+#, fuzzy
+msgid "C++ WebSocket Protocol Library"
+msgstr "Knihovna pro podporu souborů AVI"
+
+#. description(websocketpp:websocketpp-devel)
+msgid "WebSocket++ is an open source (BSD license) header only C++ library that impliments RFC6455 The WebSocket Protocol. It allows integrating WebSocket client and server functionality into C++ programs. It uses interchangeable network transport modules including one based on C++ iostreams and one based on Boost Asio."
msgstr ""
-#. summary(texlive-vocaltract)
-msgid "Visualise the vocal tract using LaTeX and PStricks"
+#. summary(weechat:weechat-lang)
+msgid "Languages for package weechat"
+msgstr "Jazykový balíček pro weechat"
+
+#. description(weechat:weechat-lang)
+msgid "Provides translations to the package weechat"
msgstr ""
-#. summary(tulip:tulip-devel-doc)
-msgid "Visualization of huge graphs - development documentation"
+#. summary(werken-xpath)
+msgid "XPath implementation using JDOM"
msgstr ""
-#. summary(tulip:tulip-devel)
-msgid "Visualization of huge graphs - development files"
+#. description(werken-xpath)
+#. description(werken-xpath:werken-xpath-javadoc)
+msgid "werken.xpath is an implementation of the W3C XPath Recommendation, on top of the JDOM library. It takes as input a XPath expression, and a JDOM tree, and returns a NodeSet (java.util.List) of selected elements. Is is being used in the development of the as-yet-unreleased werken.xslt (eXtensible Stylesheet Language) and the werken.canonical (XML canonicalization) packages."
msgstr ""
-#. summary(tulip:tulip-doc)
-msgid "Visualization of huge graphs - user documentation"
+#. summary(werken-xpath:werken-xpath-javadoc)
+msgid "Javadoc for werken-xpath"
msgstr ""
-#. summary(texlive-progressbar)
-msgid "Visualize shares of total amounts in the form of a (progress-)bar"
+#. summary(wgetpaste)
+msgid "Command-line interface to various pastebins"
msgstr ""
-#. summary(vim-plugins:vim-plugin-showmarks)
-msgid "Visually shows the location of marks"
+#. description(wgetpaste)
+msgid "Command-line interface to communicate with various pastebin services."
msgstr ""
-#. summary(w3c-markup-validator)
-msgid "W3C Markup Validator"
+#. summary(whfc)
+msgid "A client for the network fax server HylaFAX 4.x under Microsoft Windows(r)"
+msgstr "Klient pro síťový faxový server HylaFAX 4.x pod Microsoft Windows(r)"
+
+#. description(whfc)
+msgid "WHFC is a client for the network fax server HylaFAX 4.x under Microsoft Windows(r) 95/98 and NT/2000."
+msgstr "WHFC je klient pro síťový fax server HylaFAX 4.x pod Microsoft Windows(r) 95/98 a NT/2000."
+
+#. summary(whohas)
+msgid "Package list querying tool"
msgstr ""
-#. description(w3m-el:w3m-el-xemacs)
+#. description(whohas)
msgid ""
-"W3m-el is a simple interface program to use w3m with (X)Emacs.\n"
+"whohas is a command line tool that allows querying several package lists at once - currently supported are Arch, Debian, Fedora, Gentoo, Mandriva, openSUSE, Slackware (and linuxpackages.net), Source Mage, Ubuntu, FreeBSD, NetBSD, OpenBSD, Fink, MacPorts, Cygwin and OpenMoko. whohas is written in Perl and was designed to help package maintainers find ebuilds, pkgbuilds and similar package definitions from other distributions to learn from. However, it can also be used by normal users who want to know:\n"
"\n"
-"W3 is the most well known WEB browser which works on (X)Emacs, but it is very slow. w3m-el is a simple and speedy alternative.\n"
+" * Which distribution provides packages on which the user depends. * What version of a given package is in use in each distribution, or in each release of a distribution (not implemented for all distributions)."
+msgstr ""
+
+#. summary(wine-gecko)
+msgid "The Wine specific Gecko HTML rendering engine"
+msgstr ""
+
+#. description(wine-gecko)
+msgid "This package contains the prepackaged Win32 Gecko rendering engine for use by Wine."
+msgstr ""
+
+#. summary(withlock)
+msgid "A locking wrapper script"
+msgstr ""
+
+#. description(withlock)
+msgid ""
+"withlock is a locking wrapper script to make sure that some program isn't run more than once. It is ideal to prevent periodic jobs spawned by cron from stacking up.\n"
"\n"
-"W3m-el uses w3m, which is a pager with WWW capability, developed by Akinori ITO. It is a pager, but it can be used as a text-mode WWW browser."
+"The locks created are valid only while the wrapper is running, and thus will never require a cleanup, as after a reboot. Thus, the wrapper is safe and easy to use, and much better than implementing half-hearted locking within scripts."
msgstr ""
-#. summary(w3m-el:w3m-el-xemacs)
-msgid "W3m-el is a simple interface program to use w3m with XEmacs."
+#. summary(wm-icons)
+msgid "Window Manager Icons, themable icon distribution"
+msgstr "Ikony a témata pro správce oken"
+
+#. description(wm-icons)
+msgid "The Window Manager Icons is an efficient icon distribution designed to be standardized and configurable. Includes several themed icon sets, scripts, and configurations for several window managers."
+msgstr "Tento balík obsahuje několik sad ikon, skriptů a konfiguračních nástrojů pro různé správce ikon."
+
+#. summary(words:words-british)
+msgid "A British words dictionary"
+msgstr "Slovník britských slov"
+
+#. description(words:words-british)
+msgid ""
+"This package contains a British words dictionary which will be installed as\n"
+"\n"
+"/usr/share/dict/british\n"
+"\n"
+"For a description see the package words."
msgstr ""
-#. description(whfc)
-msgid "WHFC is a client for the network fax server HylaFAX 4.x under Microsoft Windows(r) 95/98 and NT/2000."
-msgstr "WHFC je klient pro síťový fax server HylaFAX 4.x pod Microsoft Windows(r) 95/98 a NT/2000."
+#. summary(words:words-canadian)
+msgid "A Canadian words dictionary"
+msgstr "Slovník kanadských slov"
-#. summary(texlive-wadalab)
-msgid "Wadalab (Japanese) font packages"
+#. description(words:words-canadian)
+msgid ""
+"This package contains a Canadian words dictionary which will be installed as\n"
+"\n"
+"/usr/share/dict/canadian\n"
+"\n"
+"For a description see the package words."
msgstr ""
-#. description(weather-wallpaper)
-msgid "Weather wallpaper is a program which connects to NOAA each hour to get the current weather at the specified location and creates and sets a wallpaper with the data retrieved."
+#. summary(wqy-bitmap-fonts)
+msgid "Wen Quan Yi Bitmap Song CJK Fonts"
msgstr ""
-#. summary(texlive-urlbst)
+#. description(wqy-bitmap-fonts)
+msgid "The Wen Quan Yi bitmap font includes complete CJK Unified Ideograph (U4E00 - U9FA5) glyphs at four different sizes (9pt-12X12 pixel, 10pt-13X13 pixel, 11pt-15X15 pixel, 12pt-16x16 pixel) and two weights (medium and bold)."
+msgstr ""
+
+#. summary(ws-jaxme)
+#. summary(ws-jaxme:ws-jaxme-javadoc)
+#. summary(ws-jaxme:ws-jaxme-manual)
+msgid "Open source implementation of JAXB"
+msgstr ""
+
+#. description(ws-jaxme)
+#. description(ws-jaxme:ws-jaxme-javadoc)
+#. description(ws-jaxme:ws-jaxme-manual)
+msgid ""
+"A Java/XML binding compiler takes as input a schema description (in most cases an XML schema, but it may be a DTD, a RelaxNG schema, a Java class inspected via reflection, or a database schema). The output is a set of Java classes: * A Java bean class matching the schema description. (If the schema was obtained via Java reflection, the original Java bean class.)\n"
+"\n"
+"* Read a conforming XML document and convert it into the equivalent Java bean.\n"
+"\n"
+"* Vice versa, marshal the Java bean back into the original XML document."
+msgstr ""
+
+#. summary(wsdl4j:wsdl4j-javadoc)
+msgid "Javadoc for wsdl4j"
+msgstr "Javadoc pro wsdl4j"
+
+#. description(wsdl4j:wsdl4j-javadoc)
+msgid ""
+"The Web Services Description Language for Java Toolkit (WSDL4J) allows the creation, representation, and manipulation of WSDL documents describing services. This codebase will eventually serve as a reference implementation of the standard created by JSR110.\n"
+"\n"
+"This package contains the javadoc documentation for the Web Services Description Language for Java."
+msgstr ""
+"WSDL4J (The Web Services Description Language for Java Toolkit) umožňuje vytváření, reprezentaci a manipulaci s službami popisujícími WSDL dokumenty. Tento kód může sloužit jako referenční implementace standardu vytvořeného JSR110.\n"
+"\n"
+"tento balíček obsahuje javadoc dokumentaci pro WSDL4J."
+
+#. summary(wt:wt-doc)
+msgid "Web Toolkit - Doxygen Documentation"
+msgstr ""
+
+#. description(wt:wt-doc)
+msgid ""
+"Doxygen documentation for the Wt library.\n"
+"\n"
+"Wt is a C++ library and application server for developping and deploying web applications. The widget-centric API is inspired by existing C++ GUI APIs. It offers complete abstraction of any web-specific implementation details. Most imporantly, the entire application is written in only one compiled language (C++), from which the library generates the necessary HTML, Javascript, CGI, and AJAX code."
+msgstr ""
+
+#. summary(wxWidgets-docs)
+msgid "wxWidgets Documentation"
+msgstr ""
+
+#. description(wxWidgets-docs)
+msgid "This package contains wxWidgets documentation in HTML format."
+msgstr ""
+
+#. summary(wxhexeditor:wxhexeditor-lang)
#, fuzzy
-#| msgid "MP3 support for k3b"
-msgid "Web support for BibTeX"
-msgstr "Podpora MP3 pro k3b"
+#| msgid "Languages for package gedit"
+msgid "Languages for package wxhexeditor"
+msgstr "Jazykový balíček pro gedit"
-#. summary(webkit-sharp)
-msgid "WebKit bindings for Mono"
+#. description(wxhexeditor:wxhexeditor-lang)
+#, fuzzy
+msgid "Provides translations to the package wxhexeditor"
+msgstr "Poskytuje překlady k balíčku dia"
+
+#. summary(x-tile)
+msgid "Panel applet for tiling windows"
msgstr ""
-#. description(webkit-sharp)
+#. description(x-tile)
msgid ""
-"WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers.\n"
+"X-tile is a GNOME applet for your panel (or optionally a standalone application, working with kde as well) that allows you to select a number of windows and tile them in different ways.\n"
"\n"
-"This package provides Mono bindings for WebKit libraries."
+"This is especially useful for comparing products in separate web pages, or for programmers refering to documentation as they are programming."
msgstr ""
-#. description(xerces-j2:xerces-j2-scripts)
+#. summary(x-tile:x-tile-lang)
+msgid "Languages for package x-tile"
+msgstr "Jazykový balíček pro x-tile"
+
+#. description(x-tile:x-tile-lang)
+msgid "Provides translations to the package x-tile"
+msgstr ""
+
+#. summary(xalan-j2:xalan-j2-demo)
+msgid "Demonstration and samples for xalan-j2"
+msgstr ""
+
+#. description(xalan-j2:xalan-j2-demo)
msgid ""
-"Welcome to the future! Xerces2 is the next generation of high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces introduces the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program.\n"
+"Xalan is an XSLT processor for transforming XML documents into HTML, text, or other XML document types. It implements the W3C Recommendations for XSL Transformations (XSLT) and the XML Path Language (XPath). It can be used from the command line, in an applet or a servlet, or as a module in other program.\n"
"\n"
-"The Apache Xerces2 parser is the reference implementation of XNI but other parser components, configurations, and parsers can be written using the Xerces Native Interface. For complete design and implementation documents, refer to the XNI Manual.\n"
+"This package contains demonstration and sample files for Xalan."
+msgstr ""
+"Xalan je XSLT procesor pro transformaci XML dokumentů do HTML, textu a jiných typů. Implementuje W3C dporučení pro XSL transformace (XSLT) a XML Path Language (XPath). Lze ho používat z příkazové řádky, v appletu nebo servletu nebo jako modul jiných programů.\n"
"\n"
-"Xerces 2 is a fully conforming XML Schema processor. For more information, refer to the XML Schema page.\n"
+"Tento balíček obsahuje příklady pro Xalan."
+
+#. summary(xalan-j2:xalan-j2-manual)
+msgid "Manual for xalan-j2"
+msgstr "Manuál xalan-j2"
+
+#. description(xalan-j2:xalan-j2-manual)
+msgid ""
+"Xalan is an XSLT processor for transforming XML documents into HTML, text, or other XML document types. It implements the W3C Recommendations for XSL Transformations (XSLT) and the XML Path Language (XPath). It can be used from the command line, in an applet or a servlet, or as a module in other program.\n"
"\n"
-"Xerces 2 also provides a partial implementation of Document Object Model Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working Drafts. For more information, refer to the DOM Level 3 Implementation page.\n"
+"This package contains the manual for Xalan."
+msgstr ""
+"Xalan je XSLT procesor pro transformaci XML dokumentů do HTML, textu a jiných typů. Implementuje W3C dporučení pro XSL transformace (XSLT) a XML Path Language (XPath). Lze ho používat z příkazové řádky, v appletu nebo servletu nebo jako modul jiných programů.\n"
"\n"
-"This package contains additional utility scripts for Xerces2."
+"Tento balíček obsahuje manuál pro Xalan."
+
+#. summary(xalan-j2:xalan-j2-xsltc)
+msgid "Java XSLT compiler"
+msgstr "Java XSLT compilátor"
+
+#. description(xalan-j2:xalan-j2-xsltc)
+msgid "The XSLT Compiler is a Java-based tool for compiling XSLT stylesheets into lightweight and portable Java byte codes called translets."
+msgstr "XSLT Compiler je na Jave založený nástroj pro kompilaci XSLT stylů do java transletů."
+
+#. summary(xaos:xaos-lang)
+#, fuzzy
+#| msgid "Languages for package exo"
+msgid "Languages for package xaos"
+msgstr "Jazykový balíček pro exo"
+
+#. description(xaos:xaos-lang)
+#, fuzzy
+#| msgid "Provides translations to the package dia"
+msgid "Provides translations to the package xaos"
+msgstr "Poskytuje překlady k balíčku dia"
+
+#. summary(xdg-user-dirs-gtk:xdg-user-dirs-gtk-lang)
+msgid "Languages for package xdg-user-dirs-gtk"
+msgstr "Jazykový balíček pro xdg-user-dirs-gtk"
+
+#. description(xdg-user-dirs-gtk:xdg-user-dirs-gtk-lang)
+msgid "Provides translations to the package xdg-user-dirs-gtk"
msgstr ""
-"Vítejte v budoucnosti! Xerces2 je nová generace vysoce výkonného XML parseru z rodiny Apache Xerces Tato nová verze Xerces přichází s Xerces Native Interface (XNI) a kompletním prostředím pro vývoj parsovacích komponent a nastavení, které jsou extrémně modulární a jednoduše programovatelné.\n"
+
+#. summary(xdg-user-dirs:xdg-user-dirs-lang)
+msgid "Languages for package xdg-user-dirs"
+msgstr "Jazykový balíček pro xdg-user-dirs"
+
+#. description(xdg-user-dirs:xdg-user-dirs-lang)
+#, fuzzy
+#| msgid "Provides translations to the package dasher"
+msgid "Provides translations to the package xdg-user-dirs"
+msgstr "Poskytuje překlady k balíčku dasher"
+
+#. summary(xdmsc)
+msgid "Xterminal -- Use SuSE Linux as an X terminal"
+msgstr "Xterminal -- Nastaví SUSE Linux, aby fungoval jako X terminál"
+
+#. description(xdmsc)
+msgid ""
+"Some useful scripts for using SuSE Linux as an X terminal.\n"
"\n"
-"Tento balíček obsahuje dodatečné skripty Xerces2."
+"You will find the documentation in the following directory\n"
+"\n"
+"/usr/share/doc/packages/xdmsc/"
+msgstr ""
+#. summary(xemacs:xemacs-el)
+msgid "Emacs-Lisp source files for XEmacs"
+msgstr "Několik programů v Emacs-Lispu pro XEmacs"
+
+#. description(xemacs:xemacs-el)
+#. description(xemacs-packages:xemacs-packages-el)
+msgid "Most Emacs-Lisp source files are not needed for running XEmacs. Most of them are also available in byte compiled form and therefore not necessary at runtime. The true XEmacs addict will install them nevertheless because it is often useful and enlightening to have a look at the Lisp sources."
+msgstr "Několik programů v Emacs-Lispu, které nejsou nezbytné pro běh XEmacsu. Většina z těchto souborů je již přeložena a proto nejsou nezbytné. Skutečný XEmacs je však vyžaduje nainstalovat."
+
+#. summary(xemacs:xemacs-info)
+msgid "Info Files for XEmacs"
+msgstr "Info soubory pro Xemacs"
+
+#. description(xemacs:xemacs-info)
+msgid "This package contains all info files for XEmacs. All these files can be read online with XEmacs and describe XEmacs and some of its modes."
+msgstr "Tento balíček obsahuje všechny info soubory pro Xemacs. Všechny tyto soubory lze číst přímo Xemacsem a popisují xemacs a některé jeho režimy."
+
+#. summary(xemacs-packages)
+msgid "XEmacs Packages"
+msgstr "Balíčky XEmacs"
+
+#. description(xemacs-packages)
+msgid "A collection of additional lisp packages for XEmacs. You must install this package when you want to use the XEmacs package, they are needed for most non-trivial XEmacs functions."
+msgstr "Kolekce přídavných lisp balíčků pro XEmacs. Tento balíček musíte nainstalovat, obsahuje mnoho potřebných funkcí."
+
+#. summary(xemacs-packages:xemacs-packages-el)
+msgid "Emacs-Lisp source files for the XEmacs packages"
+msgstr "Emacs-Lisp zdrojové soubory pro XEmacs balíčky"
+
+#. summary(xemacs-packages:xemacs-packages-info)
+msgid "Info Files for the XEmacs Packages"
+msgstr "Info soubory pro Xemacs"
+
+#. description(xemacs-packages:xemacs-packages-info)
+msgid "This package contains all the info files for the extra packages for XEmacs. All these files can be read online with XEmacs and describe XEmacs and some of its modes."
+msgstr "Tento balíček obsahuje všechny info soubory pro X emacs. Všechno tyto soubory mohou být čteny přímo X-emacsem a popisují xemacs a některé jeho režimy."
+
+#. summary(xerces-j2:xerces-j2-demo)
+msgid "Demonstration and sample files for xerces-j2"
+msgstr ""
+
#. description(xerces-j2:xerces-j2-demo)
msgid ""
"Welcome to the future! Xerces2 is the next generation of high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces introduces the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program.\n"
@@ -30256,150 +43370,346 @@
"\n"
"Tento balíček obsahuje vzorové soubory pro Xerces2."
-#. summary(wqy-bitmap-fonts)
-msgid "Wen Quan Yi Bitmap Song CJK Fonts"
+#. summary(xerces-j2:xerces-j2-scripts)
+msgid "Additional utility scripts for xerces-j2"
msgstr ""
-#. description(texlive-seqsplit)
+#. description(xerces-j2:xerces-j2-scripts)
msgid ""
-"When one needs to type long sequences of letters (such as in base-sequences in genes) or of numbers (such as calculations of transcendental numbers), there's no obvious break points to be found. The package provides a command \\seqsplit, which makes its argument splittable anywhere, and then leaves the TeX paragraph-maker to do the splitting. While the package may obviously be used to typeset DNA sequences, the user may consider the dnaseq as a rather more powerful alternative.\n"
+"Welcome to the future! Xerces2 is the next generation of high performance, fully compliant XML parsers in the Apache Xerces family. This new version of Xerces introduces the Xerces Native Interface (XNI), a complete framework for building parser components and configurations that is extremely modular and easy to program.\n"
"\n"
-"date: 2007-07-23 20:41:48 +0000"
+"The Apache Xerces2 parser is the reference implementation of XNI but other parser components, configurations, and parsers can be written using the Xerces Native Interface. For complete design and implementation documents, refer to the XNI Manual.\n"
+"\n"
+"Xerces 2 is a fully conforming XML Schema processor. For more information, refer to the XML Schema page.\n"
+"\n"
+"Xerces 2 also provides a partial implementation of Document Object Model Level 3 Core, Load and Save and Abstract Schemas [deprecated] Working Drafts. For more information, refer to the DOM Level 3 Implementation page.\n"
+"\n"
+"This package contains additional utility scripts for Xerces2."
msgstr ""
+"Vítejte v budoucnosti! Xerces2 je nová generace vysoce výkonného XML parseru z rodiny Apache Xerces Tato nová verze Xerces přichází s Xerces Native Interface (XNI) a kompletním prostředím pro vývoj parsovacích komponent a nastavení, které jsou extrémně modulární a jednoduše programovatelné.\n"
+"\n"
+"Tento balíček obsahuje dodatečné skripty Xerces2."
-#. description(texlive-interval)
-msgid ""
-"When typing an open interval as $]a,b[$, a closing bracket is being used in place of an opening fence and vice versa. This leads to the wrong spacing in, say, $]-a,b[$ or $A\\in]a,b[=B$. The package attempts to solve this using: \\interval{a}{b} -> [a,b] \\interval[open]{a}{b} -> ]a,b[ \\interval[open left]{a}{b}\n"
-"-> ]a,b] The package also supports fence scaling and ensures that the enclosing fences will end up having the proper closing and opening types. TeX maths does not do this job properly.\n"
-"\n"
-"date: 2013-05-24 12:49:46 +0000"
+#. summary(xfburn:xfburn-lang)
+msgid "Languages for package xfburn"
+msgstr "Jazykový balíček pro xfburn"
+
+#. description(xfburn:xfburn-lang)
+msgid "Provides translations to the package xfburn"
msgstr ""
-#. summary(xml-commons-apis-bootstrap:xml-commons-which-bootstrap)
-msgid "Which subproject of xml-commons"
+#. summary(xfce4-icon-theme)
+msgid "Default Icon Theme for the Xfce Desktop Environment"
msgstr ""
-#. description(texlive-purifyeps)
-msgid ""
-"While pdfLaTeX has a number of nice features, its primary shortcoming relative to standard LaTeX+dvips is that it is unable to read ordinary Encapsulated PostScript (EPS) files, the most common graphics format in the LaTeX world. Purifyeps converts EPS files into a 'purified' form that can be read by both LaTeX+dvips and pdfLaTeX. The trick is that the standard LaTeX2e graphics packages can parse MetaPost-produced EPS directly. Hence, purifyeps need only convert an arbitrary EPS file into the same stylized format that MetaPost outputs.\n"
-"\n"
-"date: 2012-05-07 14:41:43 +0000"
+#. description(xfce4-icon-theme)
+msgid "This package contains the default icon theme for Xfce desktop environment."
msgstr ""
-#. summary(texlive-sauter)
-msgid "Wide range of design sizes for CM fonts"
+#. summary(xfce4-notifyd:xfce4-notifyd-branding-upstream)
+msgid "Upstream Branding of xfce4-notifyd"
msgstr ""
-#. summary(wm-icons)
-msgid "Window Manager Icons, themable icon distribution"
-msgstr "Ikony a témata pro správce oken"
+#. description(xfce4-notifyd:xfce4-notifyd-branding-upstream)
+msgid "This package provides the upstream look and feel for the Xfce Notification Daemon."
+msgstr ""
-#. description(vim-plugins:vim-plugin-bufexplorer)
-msgid "With bufexplorer, you can quickly switch between buffers by using '\\be' to open the explorer.vim. Then by using the normal movement keys or mouse to select the needed buffer and then finally pressing <Enter> or <Left Mouse Click> to open the buffer in the current window or <Shift Enter> or 't' to open that buffer in a new tab. If the buffer is in another tab already, bufexplorer can switch to that tab if you would like."
+#. summary(xfce4-panel:xfce4-panel-branding-upstream)
+msgid "Upstream Branding for xfce4-panel"
msgstr ""
-#. description(texlive-pst-vue3d)
-msgid ""
-"With pst-vue3d three dimensional objects like cubes, spheres and others can be viewed from different points. The distribution includes a comprehensive set of examples of usage.\n"
-"\n"
-"date: 2008-02-21 13:49:16 +0000"
+#. description(xfce4-panel:xfce4-panel-branding-upstream)
+msgid "This package provides the upstream look and feel for xfce4-panel."
msgstr ""
-#. description(texlive-underscore)
-msgid ""
-"With the package, \\_ in text mode (i.e., \\textunderscore) prints an underscore so that hyphenation of words either side of it is not affected; a package option controls whether an actual hyphenation point appears after the underscore, or merely a break point. The package also arranges that, while in text, '_' itself behaves as \\textunderscore (the behaviour of _ in maths mode is not affected.\n"
-"\n"
-"date: 2010-06-07 06:23:51 +0000"
+#. summary(xfce4-panel-plugin-whiskermenu:xfce4-panel-plugin-whiskermenu-lang)
+msgid "Languages for package xfce4-panel-plugin-whiskermenu"
msgstr ""
-#. description(yast2-auth-client)
-msgid "With this YaST2 module you can configure the network authentication for your computer. This modul provides multi domain authentication using sssd."
+#. description(xfce4-panel-plugin-whiskermenu:xfce4-panel-plugin-whiskermenu-lang)
+msgid "Provides translations to the package xfce4-panel-plugin-whiskermenu"
msgstr ""
-#. description(texlive-showhyphens)
-msgid ""
-"With this package, LuaLaTeX will indicate all possible hyphenations in the printed output.\n"
-"\n"
-"date: 2011-09-15 14:18:00 +0000"
+#. summary(xfce4-power-manager:xfce4-power-manager-branding-upstream)
+msgid "Upstream Branding of xfce4-power-manager"
msgstr ""
-#. description(texlive-opteng)
-msgid ""
-"With this template, and associated style and LaTeX packages, it is possible to estimate the page length of manuscripts for submission to the SPIE journals 'Optical Engineering' and 'Optical Engineering Letters'. With a strict three-page limit, this is particularly important for the latter. The template gives simple instructions on how to prepare the manuscript.\n"
-"\n"
-"date: 2012-06-16 12:32:26 +0000"
+#. summary(xfce4-session:xfce4-session-branding-upstream)
+msgid "Upstream Branding of xfce4-session"
msgstr ""
-#. summary(texlive-plantslabels)
-msgid "Write labels for plants"
+#. description(xfce4-session:xfce4-session-branding-upstream)
+msgid "This package provides the upstream look and feel for the Xfce Session Manager."
msgstr ""
-#. summary(texlive-newlfm)
-msgid "Write letters, facsimiles, and memos"
+#. summary(xfce4-settings:xfce4-settings-branding-upstream)
+#. summary(xfdesktop:xfdesktop-branding-upstream)
+msgid "Upstream Branding of xfce4-settings"
msgstr ""
-#. summary(texlive-modroman)
-msgid "Write numbers in lower case roman numerals"
+#. description(xfce4-settings:xfce4-settings-branding-upstream)
+msgid "This package provides the upstream look and feel for xfce4-settings."
msgstr ""
-#. summary(texlive-romanbar)
-msgid "Write roman number with \"bars\""
+#. description(xfdesktop:xfdesktop-branding-upstream)
+msgid "This package provides the upstream look and feel for the Xfce Desktop Manager."
msgstr ""
-#. summary(texlive-upmethodology)
-msgid "Writing specification such as for UP-based methodologies"
+#. summary(xfmpc:xfmpc-lang)
+msgid "Languages for package xfmpc"
+msgstr "Jazykový balíček pro xfmpc"
+
+#. description(xfmpc:xfmpc-lang)
+msgid "Provides translations to the package xfmpc"
msgstr ""
-#. description(x-tile)
+#. summary(xfwm4:xfwm4-branding-upstream)
+msgid "Upstream Branding of xfwm4"
+msgstr ""
+
+#. description(xfwm4:xfwm4-branding-upstream)
+msgid "This package provides the upstream look and feel for the xfwm4 window manager."
+msgstr ""
+
+#. summary(xindy:xindy-doc)
+msgid "Documentation for Xindy"
+msgstr ""
+
+#. description(xindy:xindy-doc)
+msgid "Documentation for the Xindy index generator."
+msgstr ""
+
+#. summary(xindy:xindy-rules)
+msgid "Rule files for Xindy"
+msgstr ""
+
+#. description(xindy:xindy-rules)
msgid ""
-"X-tile is a GNOME applet for your panel (or optionally a standalone application, working with kde as well) that allows you to select a number of windows and tile them in different ways.\n"
+"xindy is an index processor that can be used to generate book-like indexes for arbitrary document-preparation systems.\n"
"\n"
-"This is especially useful for comparing products in separate web pages, or for programmers refering to documentation as they are programming."
+"This package contains the rule files (the knowledge base) of xindy."
msgstr ""
-#. summary(xemacs-packages)
-msgid "XEmacs Packages"
-msgstr "Balíčky XEmacs"
+#. summary(xkeyboard-config:xkeyboard-config-lang)
+msgid "Languages for package xkeyboard-config"
+msgstr "Jazykový balíček pro xkeyboard-config"
-#. description(texlive-xits)
+#. description(xkeyboard-config:xkeyboard-config-lang)
+#, fuzzy
+#| msgid "Provides translations to the package cogl"
+msgid "Provides translations to the package xkeyboard-config"
+msgstr "Poskytuje překlady k balíčku cogl"
+
+#. summary(xlogin)
+#, fuzzy
+msgid "xlogin, xtelnet"
+msgstr "Programy xlogin a xtelnet pro přihlašování na jiné stroje"
+
+#. description(xlogin)
msgid ""
-"XITS is a Times-like font for scientific typesetting with proper mathematical support for modern, Unicode and OpenType capable TeX engines, namely LuaTeX and XeTeX. For use with LuaLaTeX or XeLaTeX, support is available from the fontspec and unicode-math packages.\n"
+"This package contains two scripts, which, called with the name of a remote host, will open an xterm window on the local X display with a remote session or login shell.\n"
"\n"
-"date: 2013-05-28 17:52:13 +0000"
+"The script xlogin starts by a rsh call (remote shell) an xterm on the remote host. If necessary, the access will be allowed by sending the magic key (cookie) of the display to the remote host.\n"
+"\n"
+"The script xtelnet starts a local xterm with a telnet session on the remote host."
msgstr ""
+"Tento balíček obsahuje dva skripty, které při spuštění pod jménem vzdáleného serveru, otevřou na lokálním X displeji okno programu xterm spuštěným na vzdáleném stroji.\n"
+"\n"
+"Skript xlogin startuje pomocí příkazu rsh (vzdálený shell) xterm na vzdáleném serveru. Je-li třeba, bude přístup povolen odesláním magického klíče (cookie) displeje na vzdálený server.\n"
+"\n"
+"Pokud nejste na izolované síti a jenom trochu si vážíte svých počítačů, použijte ssh místo nebezpečného rsh.\n"
+"\n"
+"Skript xtelnet spustí lokální xterm s telnet spojením na vzdálený server."
+#. summary(xls2csv)
+msgid "A script that recodes a spreadsheet's charset and saves as CSV"
+msgstr ""
+
+#. description(xls2csv)
+msgid "This script will recode a spreadsheet into a different character set and output the recoded data as a csv file. The script came about after many headaches from dealing with Excel spreadsheets from clients that were being received in various character sets."
+msgstr ""
+
+#. summary(xml-commons-apis-bootstrap)
+msgid "Common code for XML projects - bootstrapping package"
+msgstr ""
+
+#. description(xml-commons-apis-bootstrap)
+msgid "This is xml-apis from the java-bootrapping-tools package. DO NOT INSTALL ... THIS IS JUST FOR PACKAGING & BOOTSTRAPPING JAVA PURPOSES!!"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-jaxp-1.1-apis-manual)
+msgid "Documents for xml-commons-jaxp-1.1-apis"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-jaxp-1.2-apis)
+msgid "JAXP 1.2, DOM 2, SAX 2.0.1, SAX2-ext 1.0 apis"
+msgstr ""
+
+#. description(xml-commons:xml-commons-jaxp-1.2-apis)
+msgid "DOM 2 org.w3c.dom and SAX XML 2.0 org.xml.sax processor apis used by several pieces of Apache software. XSLT 1.0. This version includes the JAXP 1.2 APIs -- Java API for XML Processing 1.2, i.e. javax.xml{.parsers,.transform}"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-jaxp-1.2-apis-manual)
+msgid "Documents for xml-commons-jaxp-1.2-apis"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-jaxp-1.3-apis-manual)
+msgid "Documents for xml-commons-jaxp-1.3-apis"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-jaxp-1.4-apis)
+msgid "JAXP 1.4, DOM 2, SAX 2.0.1, SAX2-ext 1.0 apis"
+msgstr ""
+
+#. description(xml-commons:xml-commons-jaxp-1.4-apis)
+msgid "DOM 3 org.w3c.dom and SAX XML 2.0.2 (sax2r3) org.xml.sax processor apis used by several pieces of Apache software. This version includes the JAXP 1.4 APIs -- JSR 206, Java API for XML Processing 1.4, i.e. javax.xml{.parsers,.transform,.validation,.datatype,.xtype}."
+msgstr ""
+
+#. summary(xml-commons:xml-commons-jaxp-1.4-apis-manual)
+#, fuzzy
+#| msgid "Javadoc for xml-commons-apis"
+msgid "Documents for xml-commons-jaxp-1.4-apis"
+msgstr "Javadoc pro xml-commons-apis"
+
+#. description(xml-commons-apis-bootstrap:xml-commons-resolver-bootstrap)
+msgid "This is xml-resolver from the java-bootrapping-tools package. DO NOT INSTALL ... THIS IS JUST FOR PACKAGING & BOOTSTRAPPING JAVA PURPOSES!!"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-resolver11)
+msgid "XmlResolver 1.1 utility from xml-commons"
+msgstr ""
+
+#. summary(xml-commons-apis-bootstrap:xml-commons-which-bootstrap)
+msgid "Which subproject of xml-commons"
+msgstr ""
+
+#. description(xml-commons-apis-bootstrap:xml-commons-which-bootstrap)
+msgid "This is xml-which from the java-bootrapping-tools package. DO NOT INSTALL ... THIS IS JUST FOR PACKAGING & BOOTSTRAPPING JAVA PURPOSES!!"
+msgstr ""
+
+#. summary(xml-commons:xml-commons-which11)
+msgid "XmlWhich 1.1 from xml-commons"
+msgstr ""
+
#. summary(xml-im-exporter)
+#. summary(xml-im-exporter:xml-im-exporter-javadoc)
msgid "XML Im-/Exporter"
msgstr ""
#. description(xml-im-exporter)
+#. description(xml-im-exporter:xml-im-exporter-javadoc)
msgid "XML Im-/Exporter is a low level library to assist you in the straight forward process of importing and exporting XML from and to your Java classes. All of this is designed having performance and simplicity in mind."
msgstr ""
-#. summary(xpp2)
-msgid "XML Pull Parser"
+#. summary(xmldb-api)
+#. summary(xmldb-api:xmldb-api-javadoc)
+#. summary(xmldb-api:xmldb-common)
+msgid "XML:DB API for Java"
msgstr ""
-#. description(xpp2)
-msgid "XML Pull Parser 2 (XPP2) is a simple and fast incremental XML parser. NOTE: XPP2 is no longer developed and is on maintenance mode. All active development concentrates on its successor XPP3/MXP1"
+#. description(xmldb-api)
+#. description(xmldb-api:xmldb-api-javadoc)
+#. description(xmldb-api:xmldb-common)
+msgid "The API interfaces are what driver developers must implement when creating a new driver and are the interfaces that applications are developed against. Along with the interfaces a concrete DriverManager implementation is also provides."
msgstr ""
-#. summary(jdom:xom)
-msgid "XML is cool object model"
+#. summary(xmldb-api:xmldb-api-sdk)
+msgid "SDK for XML:DB API"
msgstr ""
-#. summary(texlive-filesystem:texlive-scheme-xml)
-msgid "XML scheme"
+#. description(xmldb-api:xmldb-api-sdk)
+msgid ""
+"The reference implementation provides a very simple file system based implementation of the XML:DB API. This provides what is basically a very simple native XML database that uses directories to represent collections and just stores the XML in files.\n"
+"\n"
+"The driver development kit provides a set of base classes that can be extended to simplify and speed the development of XML:DB API drivers. These classes are used to provide the basis for the reference implementation and therefore a simple example of how a driver can be implemented. Using the SDK classes significantly reduces the amount of code that must be written to create a new driver.\n"
+"\n"
+"Along with the SDK base classes the SDK also contains a set of jUnit test cases that can be used to help validate the driver while it is being developed. The test cases are still in development but there are enough tests currently to be useful."
msgstr ""
-#. summary(xmldb-api)
-msgid "XML:DB API for Java"
+#. summary(xmlgraphics-batik:xmlgraphics-batik-demo)
+msgid "Demo for xmlgraphics-batik"
msgstr ""
+#. description(xmlgraphics-batik:xmlgraphics-batik-demo)
+msgid "Demonstrations and samples for xmlgraphics-batik."
+msgstr ""
+
+#. summary(xmlgraphics-batik:xmlgraphics-batik-rasterizer)
+msgid "Batik SVG rasterizer"
+msgstr ""
+
+#. description(xmlgraphics-batik:xmlgraphics-batik-rasterizer)
+msgid "The SVG Rasterizer is a utility that can convert SVG files to a raster format. The tool can convert individual files or sets of files, making it easy to convert entire directories of SVG files. The supported formats are JPEG, PNG, and TIFF, however the design allows new formats to be added easily."
+msgstr ""
+
+#. summary(xmlgraphics-batik:xmlgraphics-batik-slideshow)
+msgid "Batik SVG slideshow"
+msgstr ""
+
+#. description(xmlgraphics-batik:xmlgraphics-batik-slideshow)
+msgid "Batik SVG slideshow."
+msgstr ""
+
+#. summary(xmlgraphics-batik:xmlgraphics-batik-squiggle)
+msgid "Batik SVG browser"
+msgstr ""
+
+#. description(xmlgraphics-batik:xmlgraphics-batik-squiggle)
+msgid "The Squiggle SVG Browser lets you view SVG file, zoom, pan and rotate in the content and select text items in the image and much more."
+msgstr ""
+
+#. summary(xmlgraphics-batik:xmlgraphics-batik-svgpp)
+msgid "Batik SVG pretty printer"
+msgstr ""
+
+#. description(xmlgraphics-batik:xmlgraphics-batik-svgpp)
+msgid "The SVG Pretty Printer lets developers \"pretty-up\" their SVG files and get their tabulations and other cosmetic parameters in order. It can also be used to modify the DOCTYPE declaration on SVG files."
+msgstr ""
+
+#. summary(xmlgraphics-batik:xmlgraphics-batik-ttf2svg)
+msgid "Batik SVG font converter"
+msgstr ""
+
+#. description(xmlgraphics-batik:xmlgraphics-batik-ttf2svg)
+msgid "The SVG Font Converter lets developers convert character ranges from the True Type Font format to the SVG Font format to embed in SVG documents. This allows SVG document to be fully self-contained be rendered exactly the same on all systems."
+msgstr ""
+
+#. summary(xmlgraphics-commons:xmlgraphics-commons-javadoc)
+msgid "Javadoc for xmlgraphics-commons"
+msgstr ""
+
+#. summary(xmlunit)
+msgid "Provides classes to do asserts on XML"
+msgstr ""
+
#. description(xmlunit)
msgid "XMLUnit extends JUnit to simplify unit testing of XML. It compares a control XML document to a test document or the result of a transformation, validates documents against a DTD, and (from v0.5) compares the results of XPath expressions."
msgstr ""
+#. summary(xmlunit:xmlunit-javadoc)
+msgid "Javadoc for xmlunit"
+msgstr ""
+
+#. description(xmlunit:xmlunit-javadoc)
+msgid "Javadoc for xmlunit. Also contains userguide."
+msgstr ""
+
+#. summary(xnoise:xnoise-lang)
+#, fuzzy
+#| msgid "Languages for package exo"
+msgid "Languages for package xnoise"
+msgstr "Jazykový balíček pro exo"
+
+#. description(xnoise:xnoise-lang)
+#, fuzzy
+#| msgid "Provides translations to the package caribou"
+msgid "Provides translations to the package xnoise"
+msgstr "Poskytuje překlady k balíčku caribou"
+
+#. summary(jdom:xom)
+msgid "XOM is a new XML object model"
+msgstr ""
+
#. description(jdom:xom)
msgid ""
"XOM is designed to be easy to learn and easy to use. It works very straight-forwardly, and has a very shallow learning curve. Assuming you're already familiar with XML, you should be able to get up and running with XOM very quickly.\n"
@@ -30413,613 +43723,857 @@
"XOM includes built-in support for a number of XML technologies including Namespaces in XML, XPath, XSLT, XInclude, xml:id, and Canonical XML. XOM documents can be converted to and from SAX and DOM."
msgstr ""
-#. summary(werken-xpath)
-msgid "XPath implementation using JDOM"
+#. summary(xorg-x11-libs)
+msgid "Compatibility metapackage for X.Org libraries"
msgstr ""
-#. summary(texlive-mpcolornames)
-msgid "XXXX"
+#. description(xorg-x11-libs)
+msgid "This package is a compatibility metapackage. It used to contain the X.Org libraries."
msgstr ""
-#. description(xalan-j2:xalan-j2-demo)
-msgid ""
-"Xalan is an XSLT processor for transforming XML documents into HTML, text, or other XML document types. It implements the W3C Recommendations for XSL Transformations (XSLT) and the XML Path Language (XPath). It can be used from the command line, in an applet or a servlet, or as a module in other program.\n"
-"\n"
-"This package contains demonstration and sample files for Xalan."
+#. summary(xortool)
+msgid "A tool to analyze multi-byte xor cipher"
msgstr ""
-"Xalan je XSLT procesor pro transformaci XML dokumentů do HTML, textu a jiných typů. Implementuje W3C dporučení pro XSL transformace (XSLT) a XML Path Language (XPath). Lze ho používat z příkazové řádky, v appletu nebo servletu nebo jako modul jiných programů.\n"
-"\n"
-"Tento balíček obsahuje příklady pro Xalan."
-#. description(xalan-j2:xalan-j2-manual)
-msgid ""
-"Xalan is an XSLT processor for transforming XML documents into HTML, text, or other XML document types. It implements the W3C Recommendations for XSL Transformations (XSLT) and the XML Path Language (XPath). It can be used from the command line, in an applet or a servlet, or as a module in other program.\n"
-"\n"
-"This package contains the manual for Xalan."
+#. description(xortool)
+msgid "A tool to do some xor analysis: * Guess the key length (based on count of equal chars). * Guess the key (base on knowledge of most frequent char)."
msgstr ""
-"Xalan je XSLT procesor pro transformaci XML dokumentů do HTML, textu a jiných typů. Implementuje W3C dporučení pro XSL transformace (XSLT) a XML Path Language (XPath). Lze ho používat z příkazové řádky, v appletu nebo servletu nebo jako modul jiných programů.\n"
-"\n"
-"Tento balíček obsahuje manuál pro Xalan."
-#. description(texlive-xdoc)
-msgid ""
-"Xdoc is a project to rewrite the implementation of the LaTeX doc package (in a broader sense) to make its features more general and flexible. For example, where doc only provides commands for documenting macros and environments, xdoc also provides commands for similarly documenting package options and switches. This is furthermore done in such a way that it is very easy to add more such commands for documenting things, such as e.g., templates (an important concept in the future LaTeX3) and program components for other languages (functions, classes, procedures, etc.). A side effect is that many minor bugs in doc are fixed. The design aims to take advantage of many still experimental features of future versions of LaTeX, but since these are neither reasonably stable nor widely available, the configuration interfaces and package author commands of xdoc are likely to change. To still provide a stable interface for other packages to build upon, the actual package names include a \"major
version number\" of sorts. The drop-in replacement package for standard doc is xdoc2; it requires nothing outside standard LaTeX2e. The docindex/docidx2e package changes the index and list of changes typesetting so that none of the formatting has to be controlled via the index style file. The docindex package provides control of formatting via templates (nice interface, but requires several experimental packages), whereas the docidx2e package has traditional raw macro interfaces and works with standard LaTeX2e.\n"
-"\n"
-"date: 2006-12-04 23:47:24 +0000"
+#. summary(xpp2)
+#. summary(xpp2:xpp2-demo)
+#. summary(xpp2:xpp2-javadoc)
+#. summary(xpp2:xpp2-manual)
+#. summary(xpp3)
+#. summary(xpp3:xpp3-javadoc)
+#. summary(xpp3:xpp3-minimal)
+msgid "XML Pull Parser"
msgstr ""
-#. summary(texlive-xgreek)
-msgid "XeLaTeX package for typesetting Greek language documents (beta release)"
+#. description(xpp2)
+#. description(xpp2:xpp2-demo)
+#. description(xpp2:xpp2-javadoc)
+#. description(xpp2:xpp2-manual)
+msgid "XML Pull Parser 2 (XPP2) is a simple and fast incremental XML parser. NOTE: XPP2 is no longer developed and is on maintenance mode. All active development concentrates on its successor XPP3/MXP1"
msgstr ""
-#. summary(texlive-xetex-devanagari)
-msgid "XeTeX input map for Unicode Devanagari"
+#. description(xpp3)
+#. description(xpp3:xpp3-javadoc)
+#. description(xpp3:xpp3-minimal)
+msgid "Xml Pull Parser 3rd Edition (XPP3) MXP1 is a new XmlPull parsing engine that is based on ideas from XPP and in particular XPP2 but completely revised and rewritten to take best advantage of latest JIT JVMs such as Hotspot in JDK 1.4."
msgstr ""
-#. summary(texlive-xetex-tibetan)
-msgid "XeTeX input maps for Unicode Tibetan"
+#. summary(xsp)
+msgid "Small Web Server Hosting ASP.NET"
+msgstr "Malý webový server pro ASP.NET"
+
+#. description(xsp)
+msgid "The XSP server is a small Web server that hosts the Mono System.Web classes for running what is commonly known as ASP.NET."
+msgstr "XSP server je malý webový server, který hostí MONO systém. Webové třídy jsou obvyklé známé jako ASP.NET."
+
+#. summary(xtables-geoip)
+msgid "Geolocation database files for xt_geoip"
msgstr ""
-#. description(xen:xen-xend-tools)
+#. description(xtables-geoip)
msgid ""
-"Xen is a virtual machine monitor for x86 that supports execution of multiple guest operating systems with unprecedented levels of performance and resource isolation.\n"
+"The package contains the GeoIP definition files (which IP addresses belong to which country) that are needed for Xtables-addons's xt_geoip module.\n"
"\n"
-"This package contains the control tools that allow you to start, stop migrate, and manage virtual machines using the legacy xend/xm toolstack.\n"
+"This product includes GeoLite data created by MaxMind, available from http://maxmind.com/.\n"
"\n"
-"In addition to this package you need to install kernel-xen, xen and xen-libs to use Xen."
+"Author(s):\n"
+"---------- \tThe GeoIP data is from MaxMind.com. Please do not contact them for errors with this package."
msgstr ""
-#. description(texlive-xlop)
-msgid ""
-"Xlop (eXtra Large OPeration) will typeset arithmetic problems either in-line or \"as in school\" (using French school conventions). So for example, \\opadd{2}{3} can give either $2+3=5$ or something similar to: \\begin{tabular}{r} 2\\\\ +3\\\\ \\hline 5\\end{tabular}. Furthermore, numbers may be very large, e.g 200 figures (with a very long compilation time). Many other features allow to deal with numbers (tests, display, some high level operations, etc.)\n"
-"\n"
-"date: 2013-02-26 19:28:25 +0000"
-msgstr ""
+#. summary(xvfb-run)
+#, fuzzy
+#| msgid "A Perl Script to Convert Packages"
+msgid "Script to run a virtualized X-Server"
+msgstr "Perlový skript pro konvertování programových balíčků"
-#. description(xpp3)
-msgid "Xml Pull Parser 3rd Edition (XPP3) MXP1 is a new XmlPull parsing engine that is based on ideas from XPP and in particular XPP2 but completely revised and rewritten to take best advantage of latest JIT JVMs such as Hotspot in JDK 1.4."
+#. description(xvfb-run)
+msgid "This script starts an instance of Xvfb, the \"fake\" X server, runs a command with that server available, and kills the X server when done. The return value of the command becomes the return value of this script."
msgstr ""
-#. summary(xml-commons:xml-commons-resolver11)
-msgid "XmlResolver 1.1 utility from xml-commons"
+#. summary(xz:xz-lang)
+msgid "Languages for package xz"
+msgstr "Jazykový balíček pro xz"
+
+#. description(xz:xz-lang)
+msgid "Provides translations to the package xz"
msgstr ""
-#. summary(xml-commons:xml-commons-resolver12)
-msgid "XmlResolver 1.2 from xml-commons"
+#. summary(yast2-add-on:yast2-add-on-devel-doc)
+msgid "YaST2 - Add-on - Development Documentation"
msgstr ""
-#. summary(xml-commons:xml-commons-which11)
-msgid "XmlWhich 1.1 from xml-commons"
+#. description(yast2-add-on:yast2-add-on-devel-doc)
+msgid "This package contains development documentation for using the API provided by yast2-add-on package."
msgstr ""
-#. description(texlive-xskak)
-msgid ""
-"Xskak, as its prime function, saves information about a chess game for later use (e.g., to loop through a game to make an animated board). The package also extends the input that the parsing commands can handle and offers an interface to define and switch between indefinite levels of styles.\n"
-"\n"
-"date: 2008-10-20 20:21:01 +0000"
+#. summary(yast2-audit-laf)
+msgid "YaST2 - Configuration of Linux Auditing (LAF)"
msgstr ""
-#. description(texlive-xtab)
-msgid ""
-"Xtab is an extended and somewhat improved version of supertabular; it provides tables that break across pages.\n"
-"\n"
-"date: 2011-07-31 14:09:03 +0000"
+#. description(yast2-audit-laf)
+msgid "This module allows the configuration of the audit daemon as well as to add rules for the audit subsystem."
msgstr ""
-#. description(xtables-addons:xtables-addons-kmp-pae)
-msgid ""
-"Xtables is used to set up, maintain, and inspect the tables of IP packet filter rules in the Linux kernel.\n"
-"\n"
-"Xtables-addons is the successor to patch-o-matic(-ng). Likewise, it contains extensions that were not, or are not yet, accepted in the main kernel/iptables packages."
+#. summary(yast2-devtools:yast2-buildtools)
+msgid "Minimal set of tools needed to build yast module"
msgstr ""
-#. summary(xdmsc)
-msgid "Xterminal -- Use SuSE Linux as an X terminal"
-msgstr "Xterminal -- Nastaví SUSE Linux, aby fungoval jako X terminál"
-
-#. description(yaz:yaz-doc)
-msgid ""
-"YAZ is a C library for developing client and server applications using the ANSI/NISO Z39.50 protocol for Information Retrieval.\n"
-"\n"
-"This package contains the documentation."
+#. description(yast2-devtools:yast2-buildtools)
+msgid "Scripts and templates required for rebuilding the existing YaST2 modules and components (both ruby and C++)."
msgstr ""
-#. description(yast2-branding-openSUSE)
-msgid "YaST branding for the openSUSE distribution"
+#. summary(yast2-cluster)
+msgid "Configuration of cluster"
msgstr ""
-#. summary(yast2-add-on:yast2-add-on-devel-doc)
-msgid "YaST2 - Add-on - Development Documentation"
+#. summary(yast2-devtools)
+msgid "YaST2 - Development Tools"
+msgstr "YaST2 - Vývojářské nástroje"
+
+#. description(yast2-devtools)
+msgid "Scripts and templates for developing YaST2 modules and components."
msgstr ""
-#. summary(yast2-trans:yast2-trans-ast)
-msgid "YaST2 - Asturian Translations"
+#. summary(yast2-docker)
+#, fuzzy
+msgid "YaST2 - GUI for docker management"
+msgstr "Nastavení katalogů"
+
+#. description(yast2-docker)
+msgid "Provides easy to use GUI for running docker containers."
msgstr ""
#. summary(yast2-fcoe-client)
msgid "YaST2 - Configuration of Fibre Channel over Ethernet"
msgstr ""
+#. description(yast2-fcoe-client)
+msgid "This package contains the YaST2 component for the Fibre Channel over Ethernet (FCoE) configuration."
+msgstr ""
+
+#. summary(yast2-geo-cluster)
+msgid "Configuration of booth"
+msgstr ""
+
+#. description(yast2-inetd:yast2-inetd-doc)
+msgid "The YaST2 component for configuring the inetd and xinetd daemons (documentation)."
+msgstr ""
+
+#. summary(yast2-installation-control)
+msgid "YaST2 - RNG schema for installation control files"
+msgstr ""
+
+#. description(yast2-installation-control)
+msgid "This package contains RNG schema for validating the installation control files."
+msgstr ""
+
+#. summary(yast2-instserver:yast2-instserver-devel-doc)
+msgid "YaST2 - Installation Server - Development Documentation"
+msgstr ""
+
+#. description(yast2-instserver:yast2-instserver-devel-doc)
+msgid "This package contains development documentation for using the API provided by this package."
+msgstr ""
+
+#. summary(yast2-iplb)
+msgid "Configuration of iplb"
+msgstr ""
+
#. description(yast2-iplb)
msgid "YaST2 - Configuration of IP load balance.With this module you can configure a IP load balance system, frequently used on high availability (HA) clusters."
msgstr ""
-#. summary(yast2-audit-laf)
-msgid "YaST2 - Configuration of Linux Auditing (LAF)"
+#. summary(yast2-iscsi-lio-server)
+msgid "Configuration of iSCSI LIO target"
msgstr ""
+#. description(yast2-iscsi-lio-server)
+msgid "This package contains configuration of iSCSI LIO target"
+msgstr ""
+
#. summary(yast2-nis-server:yast2-nis-server-devel-doc)
msgid "YaST2 - Developer documentation for yast2-nis-server"
msgstr ""
-#. summary(yast2-devtools)
-msgid "YaST2 - Development Tools"
-msgstr "YaST2 - Vývojářské nástroje"
+#. description(yast2-nis-server:yast2-nis-server-devel-doc)
+msgid "This package contains documentation for yast2-nis-server"
+msgstr ""
-#. summary(yast2-pkg-bindings-devel-doc)
-msgid "YaST2 - Documentation for yast2-pkg-bindings package"
+#. summary(yast2-ntp-client:yast2-ntp-client-devel-doc)
+msgid "YaST2 - NTP Client - Development Documentation"
msgstr ""
-#. summary(yast2-reipl)
-msgid "YaST2 - IPL loader"
+#. description(yast2-ntp-client:yast2-ntp-client-devel-doc)
+msgid "This package contains development documentation for using the API provided by yast2-ntp-client package."
msgstr ""
-#. summary(yast2-instserver:yast2-instserver-devel-doc)
-msgid "YaST2 - Installation Server - Development Documentation"
+#. summary(yast2-pkg-bindings-devel-doc)
+msgid "YaST2 - Documentation for yast2-pkg-bindings package"
msgstr ""
-#. summary(yast2-ntp-client:yast2-ntp-client-devel-doc)
-msgid "YaST2 - NTP Client - Development Documentation"
+#. description(yast2-pkg-bindings-devel-doc)
+msgid "This documenation package describes the package manager API (Pkg:: namespace) used in YaST scripts. The documentation is autogenerated from the pkg-bindings sources."
msgstr ""
-#. summary(yast2-auth-client)
-msgid "YaST2 - Network Authentication Configuration"
+#. summary(yast2-reipl)
+msgid "YaST2 - IPL loader"
msgstr ""
-#. summary(yast2-installation-control)
-msgid "YaST2 - RNG schema for installation control files"
+#. description(yast2-reipl)
+msgid "Module for loading IPL from running system on S/390"
msgstr ""
#. summary(yast2-support)
msgid "YaST2 - Support Inquiries"
msgstr "YaST2 - Dotazy na instalační podporu"
+#. description(yast2-support)
+msgid "This module allows you to collect system information for installation support in a standardized format."
+msgstr "Tento modul umožňuje posílat dotazy na Instalační podporu ve standardizovaném formátu. "
+
#. summary(yast2-sysconfig:yast2-sysconfig-devel-doc)
msgid "YaST2 - Sysconfig Editor - Development Documentation"
msgstr ""
+#. description(yast2-sysconfig:yast2-sysconfig-devel-doc)
+msgid "This package contains development documentation for using the API provided by yast2-sysconfig package."
+msgstr ""
+
#. summary(yast2-testsuite)
msgid "YaST2 - Testsuite"
msgstr "YaST2 - Testovací nástroje"
+#. description(yast2-testsuite)
+msgid "This is a package for the YaST2 modules testsuite preparation and execution."
+msgstr "Tento balík obsahuje sadu souborů potřebných pro testování součástí YaST2 a jeho přípravu."
+
#. summary(yast2-trans)
msgid "YaST2 - Translation Container Package"
msgstr ""
-#. description(yast2-trans:yast2-trans-ast)
-msgid "YaST2 - Translations for Asturian."
+#. description(yast2-trans)
+msgid "This is a container package. Its only purpose is to build the yast2-trans-LL, yast2-trans-LLL, and yast2-trans-LL_CC packages as subpackages."
msgstr ""
-#. description(texlive-yax)
+#. summary(yast2-trans-allpacks)
+msgid "Internal: Require all YaST Translation Packages (Empty)"
+msgstr ""
+
+#. description(yast2-trans-allpacks)
msgid ""
-"YaX is advertised as a key system, but it rather organizes attributes in parameters, which parameters can be executed, so that YaX is halfway between key management and macro definition (and actually hopes to provide a user's interface). Values assigned to attributes can be retrieved and tested in various ways, with full expandability ensured as much as possible. Finally, YaX's syntax is a quite peculiar (as few braces as possible), but may be customized. YaX is based on texapi and thus requires e-TeX.\n"
+"The package requires all YaST translation packages (yast2-trans-{??,??_??}). Otherwise it is empty.\n"
"\n"
-"date: 2011-01-23 16:05:29 +0000"
+"For internal use only."
msgstr ""
-#. summary(texlive-yax)
-#, fuzzy
-#| msgid "Yet Another Pager Software"
-msgid "Yet Another Key System"
-msgstr "Další program pro pager"
+#. summary(yast2-trans:yast2-trans-ast)
+msgid "YaST2 - Asturian Translations"
+msgstr ""
-#. description(texlive-thesis-titlepage-fhac)
-msgid ""
-"Yet another thesis titlepage style: support of Fachhochschule Aachen (Standort Juelich)\n"
-"\n"
-"date: 2007-03-12 13:32:12 +0000"
+#. description(yast2-trans:yast2-trans-ast)
+msgid "YaST2 - Translations for Asturian."
msgstr ""
-#. description(texlive-york-thesis)
+#. summary(yast2-trans-pot)
+msgid "All YaST .pot Files (for devel only)"
+msgstr ""
+
+#. description(yast2-trans-pot)
+msgid "All .pot files"
+msgstr ""
+
+#. summary(yaz:yaz-doc)
+#, fuzzy
+msgid "Documentation for yaz (Z39.50 Library)"
+msgstr "Obsahuje soubory a knihovny potřebné pro vývoj."
+
+#. description(yaz:yaz-doc)
msgid ""
-"York Graduate Studies has again changed the requirements for theses and dissertations. The established york-thesis class file now implements the changes made in Spring 2005.\n"
+"YAZ is a C library for developing client and server applications using the ANSI/NISO Z39.50 protocol for Information Retrieval.\n"
"\n"
-"date: 2011-06-13 22:09:45 +0000"
+"This package contains the documentation."
msgstr ""
-#. description(vim-plugins:vim-plugin-project)
-msgid "You can use this plugin's basic functionality to set up a list of frequently-accessed files for easy navigation. The list of files will be displayed in a window on the left side of the vim window, and you can press <Return> or double-click on filenames in the list to open the files. This is similar to how some IDEs I've used work. I find this easier to use than having to navigate a directory hierarchy with the file-explorer. It also obviates the need for a buffer explorer because you have your list of files on the left of the vim window."
+#. summary(yelp:yelp-lang)
+msgid "Languages for package yelp"
+msgstr "Jazykový balíček pro yelp"
+
+#. description(yelp:yelp-lang)
+msgid "Provides translations to the package yelp"
msgstr ""
-#. summary(yum-utils:yum-changelog)
-msgid "Yum plugin for viewing package changelogs before/after updating"
+#. summary(youtube-dl)
+msgid "A tool for downloading from Youtube"
msgstr ""
-#. summary(yum-utils:yum-downloadonly)
-msgid "Yum plugin to add downloadonly command option"
+#. description(youtube-dl)
+msgid "youtube-dl is a small command-line program to retrieve videos from YouTube.com and a few more sites."
msgstr ""
-#. summary(yum-utils:yum-tmprepo)
-msgid "Yum plugin to add temporary repositories"
+#. summary(yubikey-neo-manager)
+msgid "YubiKey NEO CCID Manager GUI"
msgstr ""
-#. summary(yum-utils:yum-tsflags)
-msgid "Yum plugin to add tsflags by a commandline option"
+#. description(yubikey-neo-manager)
+msgid "GUI for managing your YubiKey NEO configuration. Connecting multiple keys at once is supported, but only if CCID mode is active for all of them."
msgstr ""
-#. summary(yum-utils:yum-verify)
-msgid "Yum plugin to add verify command, and options"
+#. summary(yubikey-piv-manager)
+msgid "YubiKey PIV Manager GUI"
msgstr ""
+#. description(yubikey-piv-manager)
+#, fuzzy
+#| msgid "Tools for configuring atheros cards"
+msgid "Tool for configuring your PIV-enabled YubiKey."
+msgstr "Nástroje pro atheros karty"
+
#. summary(yum-utils:yum-aliases)
msgid "Yum plugin to enable aliases filters"
msgstr ""
+#. description(yum-utils:yum-aliases)
+msgid "This plugin adds the command alias, and parses the aliases config. file to enable aliases."
+msgstr ""
+
#. summary(yum-utils:yum-allowdowngrade)
msgid "Yum plugin to enable manual downgrading of packages"
msgstr ""
-#. summary(yum-utils:yum-upgrade-helper)
-msgid "Yum plugin to help upgrades to the next distribution version"
+#. description(yum-utils:yum-allowdowngrade)
+msgid "This plugin adds a --allow-downgrade flag to yum to make it possible to manually downgrade packages to specific versions."
msgstr ""
#. summary(yum-utils:yum-basearchonly)
msgid "Yum plugin to let Yum install only basearch packages"
msgstr ""
-#. summary(yum-utils:yum-list-data)
-msgid "Yum plugin to list aggregate package data"
+#. description(yum-utils:yum-basearchonly)
+msgid "This plugin makes Yum only install basearch packages on multiarch systems. If you type 'yum install foo' on a x68_64 system, only 'foo-x.y.x86_46.rpm' is If you want to install the foo-x.y.i386.rpm, you have to type 'yum install foo. The plugin only works with 'yum install'."
msgstr ""
+#. summary(yum-utils:yum-changelog)
+msgid "Yum plugin for viewing package changelogs before/after updating"
+msgstr ""
+
+#. description(yum-utils:yum-changelog)
+msgid "This plugin adds a command line option to allow viewing package changelog deltas before or after updating packages."
+msgstr ""
+
+#. summary(yum-utils:yum-downloadonly)
+msgid "Yum plugin to add downloadonly command option"
+msgstr ""
+
+#. description(yum-utils:yum-downloadonly)
+msgid "This plugin adds a --downloadonly flag to yum so that yum will only download the packages and not install/update them."
+msgstr ""
+
+#. summary(yum-utils:yum-fastestmirror)
+msgid "Yum plugin which chooses fastest repository from a mirrorlist"
+msgstr ""
+
+#. description(yum-utils:yum-fastestmirror)
+msgid "This plugin sorts each repository's mirrorlist by connection speed prior to downloading packages."
+msgstr ""
+
#. summary(yum-utils:yum-filter-data)
msgid "Yum plugin to list filter based on package data"
msgstr ""
-#. summary(yum-utils:yum-versionlock)
-msgid "Yum plugin to lock specified packages from being updated"
+#. description(yum-utils:yum-filter-data)
+msgid "This plugin adds the options --filter- vendors, groups, packagers, licenses, arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and installed-sizes. Note that each package must match at least one pattern/range in each category, if any were specified."
msgstr ""
+#. summary(yum:yum-lang)
+msgid "Languages for package yum"
+msgstr "Jazykový balíček pro yum"
+
+#. description(yum:yum-lang)
+msgid "Provides translations to the package yum"
+msgstr ""
+
+#. summary(yum-utils:yum-list-data)
+msgid "Yum plugin to list aggregate package data"
+msgstr ""
+
+#. description(yum-utils:yum-list-data)
+msgid "This plugin adds the commands list- vendors, groups, packagers, licenses, arches, committers, buildhosts, baseurls, package-sizes, archive-sizes and installed-sizes."
+msgstr ""
+
#. summary(yum-utils:yum-merge-conf)
msgid "Yum plugin to merge configuration changes when installing packages"
msgstr ""
+#. description(yum-utils:yum-merge-conf)
+msgid "This yum plugin adds the \"--merge-conf\" command line option. With this option, Yum will ask you what to do with config files which have changed on updating a package."
+msgstr ""
+
+#. summary(yum-utils:yum-priorities)
+msgid "Plugin to give priorities to packages from different repos"
+msgstr ""
+
+#. description(yum-utils:yum-priorities)
+msgid "This plugin allows repositories to have different priorities. Packages in a repository with a lower priority can't be overridden by packages from a repository with a higher priority even if repo has a later version."
+msgstr ""
+
#. summary(yum-utils:yum-protect-packages)
msgid "Yum plugin to prevents Yum from removing itself and other protected packages"
msgstr ""
+#. description(yum-utils:yum-protect-packages)
+msgid "This plugin prevents Yum from removing itself and other protected packages. By default, yum is the only package protected, but by extension this automatically protects everything on which yum depends (rpm, python, glibc, and so on).Therefore, the plugin functions well even without compiling careful lists of all important packages."
+msgstr ""
+
#. summary(yum-utils:yum-protectbase)
msgid "Yum plugin to protect packages from certain repositories"
msgstr ""
-#. summary(yum-utils:yum-fastestmirror)
-msgid "Yum plugin which chooses fastest repository from a mirrorlist"
+#. description(yum-utils:yum-protectbase)
+msgid "This plugin allows certain repositories to be protected. Packages in the protected repositories can't be overridden by packages in non-protected repositories even if the non-protected repo has a later version."
msgstr ""
-#. summary(vim-plugins:vim-plugin-zoomwin)
-msgid "Zoom in/out of windows (toggle between one window and multi-window)"
+#. summary(yum-utils:yum-refresh-updatesd)
+msgid "Tell yum-updatesd to check for updates when yum exits"
msgstr ""
-#. description(texlive-printlen)
-msgid ""
-"\\printlength{length} prints the value of a LaTeX length in the units specified by \\uselengthunit{unit} ('unit' may be any TeX length unit except for scaled point, viz., any of: pt, pc, in, mm, cm, bp, dd or cc). When the unit is pt, the printed length value will include any stretch or shrink; otherwise these are not printed. The 'unit' argument may also be PT, in which case length values will be printed in point units but without any stretch or shrink values.\n"
-"\n"
-"date: 2010-09-22 12:58:28 +0000"
+#. description(yum-utils:yum-refresh-updatesd)
+msgid "yum-refresh-updatesd tells yum-updatesd to check for updates when yum exits. This way, if you run 'yum update' and install all available updates, puplet will almost instantly update itself to reflect this."
msgstr ""
-#. description(texlive-shapepar)
-msgid ""
-"\\shapepar is a macro to typeset paragraphs in a specific shape. The size is adjusted automatically so that the entire shape is filled with text. There may not be displayed maths or '\\vadjust' material (no \\vspace) in the argument of \\shapepar. The macros work for both LaTeX and plain TeX. For LaTeX, specify \\usepackage{shapepar}; for Plain, \\input shapepar.sty. \\shapepar works in terms of user-defined shapes, though the package does provide some predefined shapes: so you can form any paragraph into the form of a heart by putting \\heartpar{sometext...} inside your document. The tedium of creating these polygon definitions may be alleviated by using the shapepatch extension to transfig which will convert xfig output to \\shapepar polygon form.\n"
-"\n"
-"date: 2013-05-27 18:07:27 +0000"
+#. summary(yum-utils:yum-tmprepo)
+msgid "Yum plugin to add temporary repositories"
msgstr ""
-#. description(texlive-tabto-generic)
-msgid ""
-"\\tabto{<length>} moves the typesetting position to <length> from the left margin of the paragraph. If the typesetting position is already further along, \\tabto starts a new line.\n"
-"\n"
-"date: 2009-09-13 17:05:07 +0000"
+#. description(yum-utils:yum-tmprepo)
+msgid "This plugin adds the option --tmprepo which takes a url to a .repo file downloads it and enables it for a single run. This plugin tries to ensure that temporary repositories are safe to use, by default, by not allowing gpg checking to be disabled."
msgstr ""
-#. description(texlive-tabto-ltx)
-msgid ""
-"\\tabto{<length>} moves the typesetting position to <length> from the left margin of the paragraph. If the typesetting position is already further along, \\tabto starts a new line; the command \\tabto* will move position backwards if necessary, so that previous text may be overwritten. The command \\TabPositions may be used to define a set of tabbing positions, after which the command \\tab advances typesetting position to the next defined 'tab stop'.\n"
-"\n"
-"date: 2013-05-25 15:03:59 +0000"
+#. summary(yum-utils:yum-tsflags)
+msgid "Yum plugin to add tsflags by a commandline option"
msgstr ""
-#. summary(wine:wine-devel-32bit)
-msgid "files for wine development"
+#. description(yum-utils:yum-tsflags)
+msgid "This plugin allows you to specify optional transaction flags on the yum command line"
msgstr ""
-#. description(xf86-video-geode)
-msgid ""
-"geode is an Xorg driver for AMD Geode GX and LX video cards.\n"
-"\n"
-"The GX driver features XAA and EXA support for graphics acceleration, and the LX driver supports EXA (including compositing). Both drivers support dynamic rotation with XRandR, and Xv overlay support."
+#. summary(yum-utils:yum-upgrade-helper)
+msgid "Yum plugin to help upgrades to the next distribution version"
msgstr ""
-#. description(texlive-ijqc)
-msgid ""
-"ijqc.bst is a BibTeX style file to support publication in Wiley's International Journal of Quantum Chemistry. It is not in any way officially endorsed by the publisher or editors, and is provided without any warranty one could ever think of.\n"
-"\n"
-"date: 2006-08-27 15:41:02 +0000"
+#. description(yum-utils:yum-upgrade-helper)
+msgid "this plugin allows yum to erase specific packages on install/update based on an additional metadata file in repositories. It is used to simplify distribution upgrade hangups."
msgstr ""
-#. description(texlive-pst-jtree)
-msgid ""
-"jTree uses PStricks to enable linguists to typeset complex trees. The package requires use of PStricks (of course) and xkeyval packages. jTree is a development of, and replacement for, the jftree package, which is no longer available.\n"
-"\n"
-"date: 2011-01-05 07:46:38 +0000"
-msgstr ""
+#. summary(yum-utils)
+msgid "Utilities based around the yum package manager"
+msgstr "Pomocné programy postavené na správci balíků yum"
-#. description(texlive-lua-alt-getopt)
-msgid ""
-"lua_altgetopt is a MIT-licensed module for Lua, for processing application arguments in the same way as BSD/GNU getopt_long(3) functions do. This module is made available for lua script writers to have consistent command line parsing routines.\n"
-"\n"
-"date: 2012-07-10 11:36:48 +0000"
-msgstr ""
+#. description(yum-utils)
+msgid "yum-utils is a collection of utilities and examples for the yum package manager. It includes utilities by different authors that make yum easier and more powerful to use."
+msgstr "yum-utils je kolekce utilit a příkladů pro správce balíčků yum. Obsahuje utility od různých autorů, které usnadňují práci s yum."
-#. description(texlive-mf2pt1)
-msgid ""
-"mf2pt1 facilitates producing PostScript Type 1 fonts from a Metafont source file. It is not, as the name may imply, an automatic converter of arbitrary Metafont fonts to Type 1 format. mf2pt1 imposes a number of restrictions on the Metafont input. If these restrictions are met, mf2pt1 will produce valid Type 1 output with more accurate control points than can be reverse-engineered by TeXtrace, mftrace, and other programs which convert bitmaps to outline fonts.\n"
-"\n"
-"date: 2012-08-25 08:58:21 +0000"
+#. summary(yum-utils:yum-verify)
+msgid "Yum plugin to add verify command, and options"
msgstr ""
-#. description(texlive-mwcls)
-msgid ""
-"mwcls is a set of document classes for LaTeX 2e designed with Polish typographical tradition in mind. Classes include: 'mwart' (which is a replacement for 'article'), 'mwrep' ('report'), and 'mwbk' ('book'). Most features present in standard classes work with mwcls. Some extensions/exceptions include: sectioning commands allow for second optional argument (it's possible to state different texts for running head and for TOC), new environments 'itemize*' and 'enumerate*' for lists with long items, page styles have variants for normal, opening, closing, and blank pages.\n"
-"\n"
-"date: 2009-09-28 12:47:14 +0000"
+#. description(yum-utils:yum-verify)
+msgid "This plugin adds the commands verify, verify-all and verify-rpm. There are also a couple of options. This command works like rpm -V, to verify your installation."
msgstr ""
-#. summary(xfce4-branding-openSUSE:xfwm4-branding-openSUSE)
-msgid "openSUSE Branding of xfwm4"
+#. summary(yum-utils:yum-versionlock)
+msgid "Yum plugin to lock specified packages from being updated"
msgstr ""
-#. summary(yast2-branding-openSUSE)
-msgid "openSuSE branding for YaST"
+#. description(yum-utils:yum-versionlock)
+msgid "This plugin allows certain packages specified in a file to be protected from being updated by newer versions."
msgstr ""
-#. description(texlive-pdf-trans)
-msgid ""
-"pdf-trans is a set of macros for various transformations of TeX boxes (based on plain and pdfeTeX primitives). It was initially inspired by trans.tex, remade to work with pdfTeX.\n"
-"\n"
-"date: 2007-05-25 14:15:27 +0000"
+#. summary(zathura:zathura-lang)
+#, fuzzy
+#| msgid "Languages for package thunar"
+msgid "Languages for package zathura"
+msgstr "Jazykový balíček pro thunar"
+
+#. description(zathura:zathura-lang)
+#, fuzzy
+#| msgid "Provides translations to the package dasher"
+msgid "Provides translations to the package zathura"
+msgstr "Poskytuje překlady k balíčku dasher"
+
+#. summary(zenity:zenity-lang)
+msgid "Languages for package zenity"
+msgstr "Jazykový balíček pro zenity"
+
+#. description(zenity:zenity-lang)
+msgid "Provides translations to the package zenity"
msgstr ""
-#. description(texlive-pst-bar)
-msgid ""
-"pst-bar uses pstricks to draw bar charts from data stored in a comma-delimited file. Several types of bar charts may be drawn, and the drawing parameters are highly customizable. No external packages are required except those that are part of the standard pstricks distribution.\n"
-"\n"
-"date: 2009-03-12 19:12:20 +0000"
+#. summary(zeroinstall-injector)
+msgid "Decentralised cross-distribution software installation"
msgstr ""
-#. description(texlive-pst-func)
+#. description(zeroinstall-injector)
msgid ""
-"pst-func is a package built for use with PSTricks. It provides macros for plotting various mathematical functions: - polynomials and their derivatives f(x)=an*x^n+an-1*x^(n- 1)+...+a0 defined by the coefficients a0 a1 a2 ... and the derivative order; - the Fourier sum f(x) = a0/2+a1cos(omega x)+...+b1sin(omega x)+... defined by the coefficients a0 a1 a2 ... b1 b2 b3 ...; - the Bessel function defined by its order; - the Gauss function defined by sigma and mu; - Bezier curves from order 1 (two control points) to order 9 (10 control points); - the superellipse function (the Lame curve); - Chebyshev polynomials of the first and second kind; - the Thomae (or popcorn) function; - various integration-derived functions; - normal, binomial, poisson, gamma, chi-squared, student's t, F, beta, Cauchy and Weibull distribution functions and the Lorenz curve; - the Vasicek function for describing the evolution of interest rates; and - implicit functions. The plots may be generated as volumes of
rotation about the X-axis, as well.\n"
+"The Zero Install Injector makes it easy for users to install software without needing root privileges. It takes the URL of a program and runs it (downloading it first if necessary). Any dependencies of the program are fetched in the same way. The user controls which version of the program and its dependencies to use.\n"
"\n"
-"date: 2012-04-10 15:31:04 +0000"
+"Zero Install is a decentralised installation system (there is no central repository; all packages are identified by URLs), loosly-coupled (if different programs require different versions of a library then both versions are installed in parallel, without conflicts), and has an emphasis on security (all package descriptions are GPG-signed, and contain cryptographic hashes of the contents of each version). Each version of each program is stored in its own sub-directory within the Zero Install cache (nothing is installed to directories outside of the cache, such as /usr/bin) and no code from the package is run during install or uninstall. The system can automatically check for updates when software is run."
msgstr ""
-#. description(texlive-pst-geo)
-msgid ""
-"pst-geo is a set of PSTricks related packages for various cartographic projections of the terrestrial sphere. The package pst-map2d provides conventional projections such as Mercator, Lambert, cylindrical, etc. The package pst-map3d treats representation in three dimensions of the terrestrial sphere. Packages pst-map2dII and pst-map3dII allow use of the CIA World DataBank II. Various parameters of the packages allow for choice of the level of the detail and the layouts possible (cities, borders, rivers etc). Substantial data files are provided, in an (internally) compressed format. Decompression happens on-the-fly as a document using the data is displayed, printed or converted to PDF format. A Perl script is provided for the user to do the decompression, if the need should arise.\n"
-"\n"
-"date: 2009-08-31 09:47:07 +0000"
+#. summary(zynaddsubfx:zynaddsubfx-common)
+msgid "Common files for ZynAddSubFX synthesizers"
msgstr ""
-#. description(texlive-pst-magneticfield)
+#. description(zynaddsubfx:zynaddsubfx-common)
+#, fuzzy
+#| msgid "ZynAddSubFX is a many-featured real-time software synthesizer for Linux. Features include polyphony and multitimbrel and microtonal capabilities. It includes randomness of some parameters, which can make warm sounds, like analog synthesizers. This program has system and insertion effects, too."
msgid ""
-"pst-magneticfield is a PSTricks related package to draw the magnetic field lines of Helmholtz coils in a two or three dimensional view. There are several parameters to create a different output. For more informations or some examples read the documentation of the package.\n"
+"zynaddsubfx is a many-featured real-time software synthesizer for Linux.\tFeatures include polyphony and multitimbrel and microtonal capabilities. It includes randomness of some parameters, which can make warm sounds, like analog synthesizers.\tThis program has system and insertion effects, too.\n"
"\n"
-"date: 2010-06-12 12:14:46 +0000"
-msgstr ""
+"This package includes the common files needed by the implementations of the synthesizer."
+msgstr "ZynAddSubFX je mnohostraný realtimový linuxový softwarový syntetizátor s řadou funkcí jako je polyfonie. Umožňuje také náhodné nástavení některých parametrů, což vede ke skutečně živému zvuku podobnému analogovému syntetizátoru. Obsahuje i efekty a možnost jejich vkládání."
-#. description(texlive-pst-osci)
-msgid ""
-"pst-osci is a PSTricks package enables you to produce oscilloscope \"screen shots\". Three channels can be used to represent the most common signals (damped or not): namely sinusoidal, rectangular, triangular, dog's tooth (left and right oriented). The third channel allows you to add, to subtract or to multiply the two other signals. Lissajous diagrams (XY-mode) can also be obtained.\n"
-"\n"
-"date: 2008-10-08 13:45:53 +0000"
+#. summary(VirtualGL:VirtualGL-32bit)
+msgid "A toolkit for displaying OpenGL applications to thin clients"
msgstr ""
-#. description(texlive-pst-tree)
+#. description(VirtualGL:VirtualGL-32bit)
msgid ""
-"pst-tree is a pstricks package that defines a macro \\pstree which offers a structured way of joining nodes created using pst-node in order to draw trees.\n"
+"VirtualGL is a library which allows most Linux OpenGL applications to be remotely displayed to a thin client without the need to alter the applications in any way. VGL inserts itself into an application at run time and intercepts a handful of GLX calls, which it reroutes to the server's display (which presumably has a 3D accelerator attached.) This causes all 3D rendering to occur on the server's display. As each frame is rendered by the server, VirtualGL reads back the pixels from the server's framebuffer and sends them to the client for re-compositing into the appropriate X Window. VirtualGL can be used to give hardware-accelerated 3D capabilities to VNC or other remote display environments that lack GLX support. In a LAN environment, it can also be used with its built-in motion-JPEG video delivery system to remotely display full-screen 3D applications at 20+ frames/second.\n"
"\n"
-"date: 2011-09-29 15:52:33 +0000"
+"VirtualGL is based upon ideas presented in various academic papers on this topic, including \"A Generic Solution for Hardware-Accelerated Remote Visualization\" (Stegmaier, Magallon, Ertl 2002) and \"A Framework for Interactive Hardware Accelerated Remote 3D-Visualization\" (Engel, Sommer, Ertl 2000.)"
msgstr ""
-#. description(texlive-pst-uml)
-msgid ""
-"pst-uml is a PSTricks package that provides support for drawing moderately complex UML (Universal Modelling Language) diagrams. (The PDF documentation is written in French.)\n"
-"\n"
-"date: 2007-01-04 20:17:26 +0000"
+#. summary(tslib:tslib-devel-32bit)
+msgid "Development files for tslib, a touchscreen panel event layer"
msgstr ""
-#. description(texlive-sfmath)
-msgid ""
-"sfmath is a simple package for sans serif maths in documents. After including the package, all maths of the current document is displayed with sans serif fonts.\n"
-"\n"
-"date: 2008-08-23 13:48:35 +0000"
+#. description(tslib:tslib-devel-32bit)
+msgid "Devel package for tslib. Tslib is an abstraction layer for touchscreen panel events."
msgstr ""
-#. description(vim-plugins:vim-plugin-snipmate)
-msgid ""
-"snipMate aims to be an unobtrusive, concise vim script that implements some of TextMate's snippets features in Vim. A snippet is a piece of often-typed text that you can insert into your document using a trigger word followed by a <tab>.\n"
-"\n"
-"For instance, in a C file using the default installation of snipMate.vim, if you type \"for<tab>\" in insert mode, it will expand a typical for loop in C:\n"
-"\n"
-"for (i = 0; i < count; i++) { }"
+#. summary(uim:uim-32bit)
+#, fuzzy
+#| msgid "a multilingual input method library"
+msgid "A multilingual input method framework"
+msgstr "Knihovna vícejazyčné vstupní metody"
+
+#. description(uim:uim-32bit)
+msgid "Uim is a multilingual input method framework. Uim's goal is to provide simple, easily extensible and high code-quality input method development platform, and useful input method environment for users of desktop and embedded platforms."
msgstr ""
-#. description(t-prot)
-msgid ""
-"t-prot detects and, when demanded, hides annoying parts in rfc822 messages: TOFU (see below), huge quoted blocks, signatures (especially when they are too long), excessive punctuation, blocks of empty lines, and trailing spaces and tabs. For use inside of MTAs or MDAs, it may exit with appropriate libc exit codes, so annoying messages may be bounced easily.\n"
-"\n"
-"TOFU is an abbreviation that mixes German and English words. It expands to \"text oben, full-quote unten\" that means \"text above - full quote below\" and describes the style of many users who let their mailer or newsreader quote everything of the previous message and just add some text at the top."
+#. summary(uim:uim-gtk2-32bit)
+msgid "GTK2 IM Module for UIM"
msgstr ""
-#. description(texlive-tetex)
-msgid ""
-"teTeX was a comprehensive distribution of TeX, LaTeX and family, designed for ease of compilation, installation and customisation. In 2006, Thomas Esser announced he would no longer be able to support, or to produce new versions of, teTeX. With the appearance of TeX live 2007 (whose Unix-system TeX support originally derived from teTeX), no-one should be using teTeX at all, in new applications. One of the \"schemes\" available when installing TeX live provides a configuration very close to that of the old teTeX, but using modern versions of programs and packages.\n"
-"\n"
-"date: 2012-09-11 06:43:58 +0000"
+#. description(uim:uim-gtk2-32bit)
+msgid "GTK+2.0 IM module for uim"
msgstr ""
-#. description(yum-utils:yum-upgrade-helper)
-msgid "this plugin allows yum to erase specific packages on install/update based on an additional metadata file in repositories. It is used to simplify distribution upgrade hangups."
+#. summary(uim:uim-gtk3-32bit)
+msgid "GTK3 IM Module for UIM"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-animals)
-msgid "tuxpaint-stamps-animals package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(uim:uim-gtk3-32bit)
+msgid "GTK+3.0 IM module for uim"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-clothes)
-msgid "tuxpaint-stamps-clothes package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. summary(uim:uim-qt4-32bit)
+#. description(uim:uim-qt4-32bit)
+msgid "Qt4 input module plugin for uim"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-food)
-msgid "tuxpaint-stamps-food package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. summary(update-test-trival:update-test-32bit-pkg-32bit)
+msgid "Test update that contains a 32bit package"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-hobbies)
-msgid "tuxpaint-stamps-hobbies package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(update-test-trival:update-test-32bit-pkg-32bit)
+#, fuzzy
+#| msgid ""
+#| "Package for testing the update stack during product development.\n"
+#| "\n"
+#| "We will provide a \"always\" working update for this package so that the update stack could be easily tested."
+msgid ""
+"Package for testing the update stack during product development.\n"
+"\n"
+"An update for this package should contain a 32bit-package."
msgstr ""
+"Balík pro testování aktualizací během vývoje produktu.\n"
+"\n"
+"Vždy bude k dispozici funkční aktualizace tohoto balíku pro snadné testování aktualizačního systému."
-#. description(tuxpaint-stamps:tuxpaint-stamps-household)
-msgid "tuxpaint-stamps-household package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. summary(virt-v2v)
+msgid "Convert a virtual machine to run on KVM"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-medical)
-msgid "tuxpaint-stamps-medical package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(virt-v2v)
+msgid "virt-v2v is a tool for converting and importing virtual machines to libvirt-managed KVM, or Red Hat Enterprise Virtualization. It can import a variety of guest operating systems from libvirt-managed hosts and VMware ESX."
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-military)
-msgid "tuxpaint-stamps-military package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. summary(wine:wine-devel-32bit)
+msgid "files for wine development"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-naturalforces)
-msgid "tuxpaint-stamps-naturalforces package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wine:wine-devel-32bit)
+msgid "This RPM contains the header files and development tools for the WINE libraries."
+msgstr "Tento balík obsahuje statické knihovny a další soubory pořebné pro vývoj wine."
+
+#. summary(wxWidgets-3_0:wxWidgets-3_0-devel-32bit)
+msgid "Everything needed for development with wxWidgets"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-people)
-msgid "tuxpaint-stamps-people package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wxWidgets-3_0:wxWidgets-3_0-devel-32bit)
+msgid ""
+"wxWidgets is a free C++ library for cross-platform GUI development. With wxWidgets, you can create applications for different GUIs (GTK+, Motif, MS Windows, MacOS X, Windows CE, GPE) from the same source code.\n"
+"\n"
+"This package contains all files needed for developing with wxGTK3.\n"
+"\n"
+"Note: wxWidgets variant devel packages are mutually exclusive. Please read /usr/share/doc/packages/wxWidgets-3_0/README.SUSE to pick a correct variant."
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-plants)
-msgid "tuxpaint-stamps-plants package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. summary(wxWidgets-3_0:wxWidgets-3_0-plugin-sound_sdlu-3_0-32bit)
+#. summary(wxWidgets-ansi:wxWidgets-ansi-plugin-sound_sdl-2_8-wxcontainer-32bit)
+#. summary(wxWidgets:wxWidgets-plugin-sound_sdlu-2_8-stl-32bit)
+#. summary(wxWidgets-wxcontainer:wxWidgets-wxcontainer-plugin-sound_sdlu-2_8-wxcontainer-32bit)
+#. summary(wxWidgets-wxcontainer24c:wxWidgets-wxcontainer24c-plugin-sound_sdlu-2_8-wxcontainer24c-32bit)
+msgid "wxWidgets SDL Plugin"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-seasonal)
-msgid "tuxpaint-stamps-seasonal package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wxWidgets-3_0:wxWidgets-3_0-plugin-sound_sdlu-3_0-32bit)
+msgid "SDL Plugin for the wxWidgets cross-platform GUI."
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-space)
-msgid "tuxpaint-stamps-space package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wxWidgets-ansi:wxWidgets-ansi-plugin-sound_sdl-2_8-wxcontainer-32bit)
+msgid ""
+"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"\n"
+"API version: 2.8 ABI variant: wx container API with ANSI wxString"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-sports)
-msgid "tuxpaint-stamps-sports package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wxWidgets:wxWidgets-plugin-sound_sdlu-2_8-stl-32bit)
+msgid ""
+"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"\n"
+"API version: 2.8 ABI variant: STL API with Unicode support"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-symbols)
-msgid "tuxpaint-stamps-symbols package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wxWidgets-wxcontainer:wxWidgets-wxcontainer-plugin-sound_sdlu-2_8-wxcontainer-32bit)
+msgid ""
+"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"\n"
+"API version: 2.8 ABI variant: wx container API with Unicode support"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-town)
-msgid "tuxpaint-stamps-town package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. description(wxWidgets-wxcontainer24c:wxWidgets-wxcontainer24c-plugin-sound_sdlu-2_8-wxcontainer24c-32bit)
+msgid ""
+"SDL Plugin for the wxWidgets cross-platform GUI.\n"
+"\n"
+"API version: 2.8 ABI variant: wx container API with Unicode support and 2.4 compatibility"
msgstr ""
-#. description(tuxpaint-stamps:tuxpaint-stamps-vehicles)
-msgid "tuxpaint-stamps-vehicles package contains a set of 'Rubber Stamp' images which can be used with the \"Stamp\" tool within Tux Paint."
+#. summary(xcb-util-cursor:xcb-util-cursor-devel-32bit)
+msgid "Development files for the XCB cursor library (libxcursor port)"
msgstr ""
-#. description(tweets2pdf)
-msgid "tweets2pdf is an opensource lightweight python application to back up your twitter timeline, favorates, retweets, others' timelines and favorites, generally every type of tweet, into an elegent book formated properly in PDF."
+#. description(xcb-util-cursor:xcb-util-cursor-devel-32bit)
+msgid ""
+"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
+"\n"
+"This package contains the development headers for the library found in libxcb-cursor0."
msgstr ""
-#. description(texlive-xetexconfig)
-msgid "unicode-letters, and special crop.cfg and hyperref.cfg for XeTeX."
+#. summary(xcb-util-image:xcb-util-image-devel-32bit)
+msgid "Development files for the XCB image utility module"
msgstr ""
-#. description(texlive-uptex)
+#. description(xcb-util-image:xcb-util-image-devel-32bit)
msgid ""
-"upTeX is an extension of pTeX, using UTF-8 input and producing UTF-8 output. It was originally designed to improve support for Japanese, but is also useful for documents in Chinese and Korean. It can process Chinese simplified, Chinese traditional, Japanese, and Korean simultaneously, and can also process original LaTeX with \\inputenc{utf8} and Babel (Latin/Cyrillic/Greek etc.) by switching its \\kcatcode tables.\n"
+"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
"\n"
-"date: 2012-09-27 13:23:21 +0000"
+"This package contains the development headers for the library found in libxcb-image0."
msgstr ""
-#. description(virt-v2v)
-msgid "virt-v2v is a tool for converting and importing virtual machines to libvirt-managed KVM, or Red Hat Enterprise Virtualization. It can import a variety of guest operating systems from libvirt-managed hosts and VMware ESX."
+#. summary(xcb-util-keysyms:xcb-util-keysyms-devel-32bit)
+msgid "Development files for the XCB keysyms utility module"
msgstr ""
-#. description(w3mir)
+#. description(xcb-util-keysyms:xcb-util-keysyms-devel-32bit)
msgid ""
-"w3mir's main focus is to create and maintain a browsable copy of one or several remote World Wide Web sites.\n"
+"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
"\n"
-"Used to its full potential, w3mir can retrieve the contents of several related sites and leave the mirror browseable via a local web server or from a file system, such as directly from a CD-ROM.\n"
-"\n"
-"w3mir's goal is to be able to make useful mirrors of any reasonable World Wide Web site. It specifically preserves link integrity within the mirrored documents as well as the integrity of links outside the mirror, if you want it to. w3mir has a powerful \"multi scope\" mechanism enabling the user to make mirrors of several related sites and have links between them refer to the mirrored documents rather than the original site. w3mir has several features directed at getting mirrors for CD-ROM burning and the handling of some rare problems when mirroring."
+"This package contains the development headers for the library found in libxcb-keysyms1."
msgstr ""
-"Účelem programu w3mir je vytváření a udržování funkčních kopií jednoho nebo několika vzdálených WWW uzlů.\n"
-"\n"
-"Při využití všech svých možností může w3mir načítat obsah několika spřízněných uzlů tak, aby kopie byla dostupná přes lokální WWW server nebo čtením přímo ze systému souborů, například z CDROM.\n"
-"\n"
-"Cílem w3mir je vytvářet použitelné kopie WWW uzlů. Proto na žádost pečlivě zachovává integritu odkazů v rámci zrcadlených struktur stejně jako integritu odkazů mimo tyto struktury. w3mir má výkonný mechanismus \"více oblastí platnosti\" umožňující, aby při zrcadlení několika souvisejících uzlů odkazy mezi nimi ukazovaly na zrcadlené dokumenty a nikoli na původní uzly. w3mir má několik vlastností, které by měly umožnit vypálení zrcadlených struktur na CDROM a zpracovávání některých méně obvyklých problémů při zrcadlení."
-#. description(werken-xpath)
-msgid "werken.xpath is an implementation of the W3C XPath Recommendation, on top of the JDOM library. It takes as input a XPath expression, and a JDOM tree, and returns a NodeSet (java.util.List) of selected elements. Is is being used in the development of the as-yet-unreleased werken.xslt (eXtensible Stylesheet Language) and the werken.canonical (XML canonicalization) packages."
+#. summary(xcb-util-renderutil:xcb-util-renderutil-devel-32bit)
+msgid "Development files for the XCB Render utility module"
msgstr ""
-#. description(whohas)
+#. description(xcb-util-renderutil:xcb-util-renderutil-devel-32bit)
msgid ""
-"whohas is a command line tool that allows querying several package lists at once - currently supported are Arch, Debian, Fedora, Gentoo, Mandriva, openSUSE, Slackware (and linuxpackages.net), Source Mage, Ubuntu, FreeBSD, NetBSD, OpenBSD, Fink, MacPorts, Cygwin and OpenMoko. whohas is written in Perl and was designed to help package maintainers find ebuilds, pkgbuilds and similar package definitions from other distributions to learn from. However, it can also be used by normal users who want to know:\n"
+"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
"\n"
-" * Which distribution provides packages on which the user depends. * What version of a given package is in use in each distribution, or in each release of a distribution (not implemented for all distributions)."
+"This package contains the development headers for the library found in libxcb-render-util0."
msgstr ""
-#. description(withlock)
+#. summary(xcb-util-wm:xcb-util-wm-devel-32bit)
+msgid "Development files for the XCB EWMH/ICCCM utility modules"
+msgstr ""
+
+#. description(xcb-util-wm:xcb-util-wm-devel-32bit)
msgid ""
-"withlock is a locking wrapper script to make sure that some program isn't run more than once. It is ideal to prevent periodic jobs spawned by cron from stacking up.\n"
+"The XCB util modules provide a number of libraries which sit on top of libxcb, the core X protocol library, and some of the extension libraries.\n"
"\n"
-"The locks created are valid only while the wrapper is running, and thus will never require a cleanup, as after a reboot. Thus, the wrapper is safe and easy to use, and much better than implementing half-hearted locking within scripts."
+"This package contains the development headers for the library found in libxcb-ewmh2, libxcb-icccm4."
msgstr ""
-#. summary(wxWidgets-2_9-docs)
-msgid "wxWidgets Documentation"
+#. summary(xf86-video-qxl:xorg-x11-server-Xspice)
+msgid "XSpice is an X server that can be accessed by a Spice client"
msgstr ""
-#. summary(wxWidgets-3_0:wxWidgets-3_0-plugin-sound_sdlu-3_0-stl-32bit)
-msgid "wxWidgets SDL Plugin"
+#. description(xf86-video-qxl:xorg-x11-server-Xspice)
+msgid "XSpice is both an X and a Spice server that can be accessed by a Spice client."
msgstr ""
-#. description(wxWidgets-3_0:wxWidgets-3_0-devel-32bit)
-msgid ""
-"wxWidgets is a free C++ library for cross-platform GUI development. With wxWidgets, you can create applications for different GUIs (GTK+, Motif, MS Windows, MacOS X, Windows CE, GPE) from the same source code.\n"
-"\n"
-"This package contains all files needed for developing with wxGTK.\n"
-"\n"
-"API version: 3.0 (development version, API details are still not frozen) ABI variant: STL API with Unicode/ANSI support\n"
-"\n"
-"Note: wxWidgets variant devel packages are mutually exclusive. Please read /usr/share/doc/packages/wxWidgets-3_0/README.SUSE to pick a correct variant."
+#. summary(xulrunner:xulrunner-32bit)
+#, fuzzy
+msgid "Mozilla Runtime Environment"
+msgstr "Open Source WWW prohlížeč"
+
+#. description(xulrunner:xulrunner-32bit)
+msgid "XULRunner is a single installable package that can be used to bootstrap multiple XUL+XPCOM applications that are as rich as Firefox and Thunderbird."
msgstr ""
-#. description(xindy:xindy-rules)
+#. summary(zlib:zlib-devel-static-32bit)
+#, fuzzy
+msgid "Static library for zlib"
+msgstr "Sdílené knihovny pro LADCCA systém"
+
+#. description(zlib:zlib-devel-static-32bit)
msgid ""
-"xindy is an index processor that can be used to generate book-like indexes for arbitrary document-preparation systems.\n"
+"zlib is a general-purpose lossless data-compression library, implementing an API for the DEFLATE algorithm, the latter of which is being used by, for example, gzip and the ZIP archive format.\n"
"\n"
-"This package contains the rule files (the knowledge base) of xindy."
+"This subpackage contains the static version of the library used for development."
msgstr ""
-#. description(youtube-dl)
-msgid "youtube-dl is a small command-line program to retrieve videos from YouTube.com and a few more sites."
-msgstr ""
+#. summary(zvbi:zvbi-devel-32bit)
+msgid "VBI decoding library - devel package"
+msgstr "VBI dekodér - vývojářský balík"
-#. description(yum-utils:yum-refresh-updatesd)
-msgid "yum-refresh-updatesd tells yum-updatesd to check for updates when yum exits. This way, if you run 'yum update' and install all available updates, puplet will almost instantly update itself to reflect this."
+#. description(zvbi:zvbi-devel-32bit)
+msgid "This package includes the development files for the zvbi library which provides routines to read from raw VBI sampling devices, to demodulate raw to sliced VBI data, and to interpret the data of several popular services."
msgstr ""
-#. description(yum-utils)
-msgid "yum-utils is a collection of utilities and examples for the yum package manager. It includes utilities by different authors that make yum easier and more powerful to use."
-msgstr "yum-utils je kolekce utilit a příkladů pro správce balíčků yum. Obsahuje utility od různých autorů, které usnadňují práci s yum."
+#. description(zziplib:zziplib-devel-32bit)
+msgid "That are the header files needed for developing applications using ZZipLib."
+msgstr "Toto jsou hlavičkové soubory pro vývoj aplikací pomocí ZZipLib."
+
+#, fuzzy
+#~ msgid "Documentation for texlive-latex"
+#~ msgstr "Dokumentace pro adaptx"
+
+#, fuzzy
+#~ msgid "Documentation for texlive-lgrx"
+#~ msgstr "Dokumentace pro adaptx"
+
+#~ msgid "Languages for package turpial"
+#~ msgstr "Jazykový balíček pro turpial"
+
+#~ msgid "Languages for package uget"
+#~ msgstr "Jazykový balíček pro uget"
+
+#~ msgid "Languages for package xchat"
+#~ msgstr "Jazykový balíček pro xchat"
+
+#~ msgid "Package for testing the update stack during product development."
+#~ msgstr "Balík pro testování aktualizací během vývoje produktu."
+
+#~ msgid "Package ifoddpage"
+#~ msgstr "Balíček ifoddpage"
+
+#~ msgid "Package kastrup"
+#~ msgstr "Balíček kastrup"
+
+#~ msgid "Package ksfh_nat"
+#~ msgstr "Balíček ksfh_nat"
+
+#, fuzzy
+#~| msgid "JPackage Utilities"
+#~ msgid "Package langcode"
+#~ msgstr "JPackage nástroje"
+
+#~ msgid "Package latex4wp-it"
+#~ msgstr "Balíček latex4wp-it"
+
+#, fuzzy
+#~ msgid "Package leipzig"
+#~ msgstr "Balík"
+
+#, fuzzy
+#~| msgid "Package lambda"
+#~ msgid "Package luabidi"
+#~ msgstr "Balíček lambda"
+
+#~ msgid "Package misc"
+#~ msgstr "Balíček misc"
+
+#~ msgid "Package misc209"
+#~ msgstr "Balíček misc209"
+
+#, fuzzy
+#~ msgid "Package multienv"
+#~ msgstr "Balík"
+
+#~ msgid "Package ntheorem-vn"
+#~ msgstr "Balíček ntheorem-vn"
+
+#~ msgid "Package pstricks_calcnotes"
+#~ msgstr "Balíček pstricks_calcnotes"
+
+#~ msgid "Package rjlparshap"
+#~ msgstr "Balíček rjlparshap"
+
+#~ msgid "Package serbian-def-cyr"
+#~ msgstr "Balíček serbian-def-cyr"
+
+#~ msgid "Package uni-wtal-ger"
+#~ msgstr "Balíček uni-wtal-ger"
+
+#~ msgid "Package upca"
+#~ msgstr "Balíček upca"
+
+#~ msgid "Package uri"
+#~ msgstr "Balíček uri"
+
+#~ msgid "Package utf8mex"
+#~ msgstr "Balíček utf8mex"
+
+#~ msgid "Package voss-de"
+#~ msgstr "Balíček voss-de"
+
+#~ msgid "Package xbmc"
+#~ msgstr "Balíček xbmc"
+
+#, fuzzy
+#~| msgid "Extra packages"
+#~ msgid "The langcode package"
+#~ msgstr "Dodatečné balíčky"
+
+#, fuzzy
+#~ msgid "The leipzig package"
+#~ msgstr "dosutils CD dir - interní balíček."
+
+#, fuzzy
+#~| msgid "Extra packages"
+#~ msgid "The luabidi package"
+#~ msgstr "Dodatečné balíčky"
+
+#, fuzzy
+#~ msgid "This package includes the documentation for texlive-latex"
+#~ msgstr "Tento balík obsahuje dokumentaci pro AdaptX."
+
+#, fuzzy
+#~ msgid "This package includes the documentation for texlive-lgrx"
+#~ msgstr "Tento balík obsahuje dokumentaci pro AdaptX."