Author: keichwa Date: 2014-11-03 16:03:29 +0100 (Mon, 03 Nov 2014) New Revision: 90666 Modified: trunk/lcn/ru/po/RELEASE-NOTES-openSUSE.ru.po Log: mergedmerged Modified: trunk/lcn/ru/po/RELEASE-NOTES-openSUSE.ru.po =================================================================== --- trunk/lcn/ru/po/RELEASE-NOTES-openSUSE.ru.po 2014-11-03 15:03:27 UTC (rev 90665) +++ trunk/lcn/ru/po/RELEASE-NOTES-openSUSE.ru.po 2014-11-03 15:03:29 UTC (rev 90666) @@ -9,7 +9,7 @@ msgstr "" "Project-Id-Version: RELEASE-NOTES.ru\n" "Report-Msgid-Bugs-To: translation@suse.de\n" -"POT-Creation-Date: 2014-10-30 10:31+0100\n" +"POT-Creation-Date: 2014-11-03 15:57+0100\n" "PO-Revision-Date: 2014-07-29 23:49+0400\n" "Last-Translator: Alexander Melentev <minton@opensuse.org>\n" "Language-Team: Russian <opensuse-translation-ru@opensuse.org>\n" @@ -49,193 +49,438 @@ msgid "Installation" msgstr "Установка" -#: xml/release-notes.xml:103(title) +#. bnc#903242 +#: xml/release-notes.xml:102(title) +msgid "Live CD Installer and Keyboard Settings" +msgstr "" + +#: xml/release-notes.xml:103(para) +msgid "The Live CD installer presents a problem related with the keyboard settings. If the user changes from the QWERTY keyboard layout (the default en-US variant), this setting will not be properly applied, and the new system will stay with a QWERTY pre-configuration." +msgstr "" + +#: xml/release-notes.xml:109(para) +msgid "As a workaround, use the <command>localectl</command> command-line tool after the installation. For example (to install a German keyboard layout):" +msgstr "" + +#: xml/release-notes.xml:115(screen) +#, no-wrap +msgid "localectl set-x11-keymap de pc105 nodeadkeys" +msgstr "" + +#: xml/release-notes.xml:116(para) +msgid "This issue is not present in the DVD Installer." +msgstr "" + +#. bnc#895447 +#: xml/release-notes.xml:123(title) +msgid "Network After an Update With YaST" +msgstr "" + +#: xml/release-notes.xml:124(para) +msgid "After updating from 13.1 to 13.2 using YaST, there are good chances that the new Wicked network method is running together with the old NetworkManager, if you are using a laptop with a wifi connection." +msgstr "" + +#: xml/release-notes.xml:130(para) +msgid "To solve this, first disable Wicked and enable again NetworkManager:" +msgstr "" + +#: xml/release-notes.xml:134(screen) +#, no-wrap +msgid "" +"systemctl is-active network.service && systemctl stop network.service\n" +"systemctl is-active wickedd.service && systemctl stop wickedd.service\n" +"systemctl disable wicked.service\n" +"systemctl --force enable NetworkManager.service\n" +"systemctl start network.service" +msgstr "" + +#: xml/release-notes.xml:140(para) +#, fuzzy +#| msgid "To query the currently selected service, use:" +msgid "Then check whether the currently selected service is actually NetworkManager:" +msgstr "Для опроса выбранной в данный момент сетевой службы:" + +#: xml/release-notes.xml:145(screen) +#, no-wrap +msgid "systemctl -p Id show network.service" +msgstr "systemctl -p Id show network.service" + +#: xml/release-notes.xml:147(para) +msgid "And update <filename>/etc/resolv.conf</filename>:" +msgstr "" + +#: xml/release-notes.xml:151(screen) +#, fuzzy, no-wrap +#| msgid "Getting updates" +msgid "netconfig update" +msgstr "Получение обновлений" + +#: xml/release-notes.xml:153(para) +msgid "Or reboot after the <command>systemctl</command> commands to restart also <command>wpa_suplicant</command>." +msgstr "" + +#. bnc#898023 +#: xml/release-notes.xml:161(title) +msgid "Warning: No Location for Bootloader Stage1 Selected" +msgstr "" + +#: xml/release-notes.xml:162(para) +msgid "During the initial installation, in the summary view of YaST, a warning as follows can appear bellow the bootloader section: <quote>Warning: No location for bootloader stage1 selected. Unless you know what are you doing please select above location.</quote>" +msgstr "" + +#: xml/release-notes.xml:168(para) +msgid "This warning is a bug in YaST (now fixed in Factory) and you can safely ignore it." +msgstr "" + +#. bnc#900954 +#: xml/release-notes.xml:175(title) +#, fuzzy +#| msgid "Start Windows" +msgid "BtrFS and Windows 7" +msgstr "Запустить Windows" + +#: xml/release-notes.xml:176(para) +msgid "If you have Windows XP and you want to install openSUSE 13.2 with Btrfs, an error message in YaST will inform you about problems during the bootloader installation." +msgstr "" + +#: xml/release-notes.xml:181(para) +msgid "The safest option is to install in a partition with Ext4 instead of BtrFS. There is a fix that will reach Factory soon, but will be not present for 13.2." +msgstr "" + +#. bnc#897847 +#: xml/release-notes.xml:189(title) +msgid "Unbranded Grub2 on New Installs From Live" +msgstr "" + +#: xml/release-notes.xml:190(para) +msgid "A bug in YaST prevents the branding in GRUB2 bootloader when installed from the LiveCD medium. Note, the preferred way to install openSUSE 13.2 is using the DVD or the NET install. Both mediums generate a proper branded bootloader during the installation." +msgstr "" + +# dialog title for ftp installation +#. bnc#899895 +#: xml/release-notes.xml:200(title) +#, fuzzy +#| msgid "FTP Installation" +msgid "NET Installation Using Wifi" +msgstr "Установка по FTP" + +#: xml/release-notes.xml:201(para) +msgid "Performing the NET install using Wifi presents some problems in YaST. Fixing this is work in progress and will be soon available. Meanwhile the only option is to use a wire connection to complete the NET installation." +msgstr "" + +#: xml/release-notes.xml:210(title) msgid "General" msgstr "Общее" -#: xml/release-notes.xml:172(title) +#: xml/release-notes.xml:279(title) msgid "UEFI—Unified Extensible Firmware Interface" msgstr "UEFI — Unified Extensible Firmware Interface" -#: xml/release-notes.xml:173(para) +#: xml/release-notes.xml:280(para) #, fuzzy #| msgid "Prior to installing openSUSE on a system that boots using UEFI (Unified Extensible Firmware Interface) you are urgently advised to check for any firmware updates the hardware vendor recommends and, if available, to install such an update. A pre-installed Windows 8 is a strong indication that your system boots using UEFI." msgid "Prior to installing openSUSE on a system that boots using UEFI (Unified Extensible Firmware Interface), you are urgently advised to check for any firmware updates the hardware vendor recommends and, if available, to install such an update. A pre-installed Windows 8 is a strong indication that your system boots using UEFI." msgstr "Перед установкой openSUSE на систему, загружающуюся с помощью UEFI (Unified Extensible Firmware Interface), вам настоятельно рекомендуется проверить наличие обновлений прошивки, рекомендованных производителем, и в случае их существования установить такие обновления. Предустановленная Windows 8 является верным признаком того, что ваша система использует UEFI." -#: xml/release-notes.xml:181(para) +#: xml/release-notes.xml:288(para) #, fuzzy #| msgid "<emphasis>Background:</emphasis> Some UEFI firmware has bugs that cause it to break if too much data gets written to the UEFI storage area. Nobody really knows how much \"too much\" is, though. openSUSE minimizes the risk by not writing more than the bare minimum required to boot the OS. The minimum means telling the UEFI firmware about the location of the openSUSE boot loader. Upstream Linux Kernel features that use the UEFI storage area for storing boot and crash information (<literal>pstore</literal>) have been disabled by default. Nevertheless it is recommended to install any firmware updates the hardware vendor recommends." msgid "<emphasis>Background:</emphasis> Some UEFI firmware has bugs that cause it to break if too much data gets written to the UEFI storage area. Nobody really knows how much \"too much\" is, though. openSUSE minimizes the risk by not writing more than the bare minimum required to boot the OS. The minimum means telling the UEFI firmware about the location of the openSUSE boot loader. Upstream Linux Kernel features that use the UEFI storage area for storing boot and crash information (<literal>pstore</literal>) have been disabled by default. Nevertheless, it is recommended to install any firmware updates the hardware vendor recommends." msgstr "<emphasis>Обоснование:</emphasis> Некоторые прошивки UEFI содержат ошибки, приводящие к сбою в случае записи большого объёма данных в область хранения UEFI. Что характерно, никто точно не знает, насколько «большой» объём приводит к такому сбою. openSUSE минимизирует этот риск, записывая минимальный объём данных, необходимых для загрузки ОС. Под минимальным понимается указание прошивке UEFI на расположение загрузчика openSUSE. Специальные возможности ядра Linux, использующие область хранения UEFI для сведений о загрузках и сбоях (<literal>pstore</literal>), по умолчанию от� �лючены. Тем не менее, рекомендуется установить все рекомендованные производителем обновления прошивки." #. bnc#850056 -#: xml/release-notes.xml:198(title) +#: xml/release-notes.xml:305(title) msgid "UEFI, GPT, and MS-DOS Partitions" msgstr "UEFI, GPT и разделы MS-DOS" -#: xml/release-notes.xml:199(para) +#: xml/release-notes.xml:306(para) #, fuzzy #| msgid "Together with the EFI/UEFI specification a new style of partitioning arrived: GPT (GUID Partition Table). This new schema uses globally unique identifiers (128-bit values displayed in 32 hexadecimal digits) to identify devices and partition types." msgid "Together with the EFI/UEFI specification, a new style of partitioning arrived: GPT (GUID Partition Table). This new schema uses globally unique identifiers (128-bit values displayed in 32 hexadecimal digits) to identify devices and partition types." msgstr "Вместе со спецификацией EFI/UEFI применяется новый способ разметки: GPT (GUID Partition Table). Он использует глобально уникальные идентификаторы (128-битные значения в виде 32 шестнадцатеричных цифр) для определения устройств и типов разделов." -#: xml/release-notes.xml:205(para) +#: xml/release-notes.xml:312(para) #, fuzzy #| msgid "Additionally, the UEFI specification also allows legacy MBR (MS-DOS) partitions. The Linux boot loaders (ELILO or GRUB2) try to generate automatically a GUID for those legacy partitions, and write them to the firmware. Such a GUID can change frequently, causing a rewrite in the firmware. A rewrite consist of two different operation: removing the old entry and creating a new entry that replaces the first one." msgid "Additionally, the UEFI specification also allows legacy MBR (MS-DOS) partitions. The Linux boot loaders (ELILO or GRUB2) try to automatically generate a GUID for those legacy partitions, and write them to the firmware. Such a GUID can change frequently, causing a rewrite in the firmware. A rewrite consist of two different operation: removing the old entry and creating a new entry that replaces the first one." msgstr "Кроме этого, спецификация UEFI разрешает использование устаревших разделов MBR (MS-DOS). Загрузчики Linux (ELILO или GRUB2) пытаются автоматически создать GUID для таких разделов и сохранить изменения в прошивке. Такие GUID могут часто изменяться, что приводит к перезаписи данных прошивки. Перезапись состоит из двух разных действий: удаления старой записи и создания новой записи на замену старой." -#: xml/release-notes.xml:214(para) +#: xml/release-notes.xml:321(para) msgid "Modern firmware has a garbage collector that collects deleted entries and frees the memory reserved for old entries. A problem arises when faulty firmware does not collect and free those entries; this may end up with a non-bootable system." msgstr "В современных прошивках есть сборщик мусора, собирающий удалённые записи и освобождающий память, зарезервированную под старые записи. Проблема возникает в случае, когда глючная прошивка не освобождает такие записи; это может привести к невозможности загрузки системы." -#: xml/release-notes.xml:220(para) +#: xml/release-notes.xml:327(para) msgid "The workaround is simple: convert the legacy MBR partition to the new GPT to avoid this problem completely." msgstr "Обходной путь очень прост: конвертируйте устаревший раздел MBR в новый GPT, чтобы полностью избежать подобных проблем." #. bnc#850052 -#: xml/release-notes.xml:228(title) +#: xml/release-notes.xml:335(title) msgid "Booting When in Secure Boot Mode" msgstr "Загрузка в режиме Secure Boot" -#: xml/release-notes.xml:229(para) +#: xml/release-notes.xml:336(para) msgid "This only affects machines in UEFI mode with secure boot enabled." msgstr "Это касается только машин с UEFI и включённым режимом безопасной загрузки." -#: xml/release-notes.xml:232(para) +#: xml/release-notes.xml:339(para) #, fuzzy #| msgid "The new version of the shim loader allows more machines to boot with Secure Boot enabled than with openSUSE 12.3. Nevertheless, in case of trouble, first update the BIOS of your machine to the latest version. If the BIOS update does not help, report the model of your machine it the wiki (http://en.opensuse.org/openSUSE:UEFI). Then we can track it for the next release." msgid "The new version of the shim loader allows more machines to boot with Secure Boot enabled than with openSUSE 13.1. Nevertheless, in case of trouble, first update the BIOS of your machine to the latest version. If the BIOS update does not help, report the model of your machine to the wiki (http://en.opensuse.org/openSUSE:UEFI). Then we can track it for the next release." msgstr "Новая версия shim позволяет загрузиться с включённым Secure Boot большему числу машин, чем в openSUSE 12.3. Тем не менее, в случае проблем сначала обновите BIOS до последней версии. Если обновление BIOS не помогает, сообщите модель своей машины на страницу вики (http://en.opensuse.org/openSUSE:UEFI). Таким образом мы сможем отследить это перед следующим выпуском." -#: xml/release-notes.xml:245(title) +#: xml/release-notes.xml:352(title) msgid "System Upgrade" msgstr "Обновление системы" -#: xml/release-notes.xml:252(title) +#: xml/release-notes.xml:359(title) msgid "Technical" msgstr "Технические данные" #. bnc#850053 -#: xml/release-notes.xml:256(title) +#: xml/release-notes.xml:363(title) msgid "Garbage on the Screen During Installation with the Nouveau Driver" msgstr "Артефакты на экране во время установки с драйвером nouveau" -#: xml/release-notes.xml:257(para) +#: xml/release-notes.xml:364(para) msgid "On some systems with NVIDIA cards, the installer may show garbage on the top part of the screen due to problems with the default nouveau driver. If you are affected by this problem, you can disable the nouveau kernel module to run the installer and then enable it again once the system is installed or upgraded." msgstr "На некоторых системах с картами NVIDIA установщик может показывать артефакты в верхней части экрана из-за проблем с драйвером nouveau. Если вы заметили такую проблему, отключите модуль ядра nouveau перед запуском установщика, а потом включите снова после установки/обновления." -#: xml/release-notes.xml:261(para) +#: xml/release-notes.xml:371(para) msgid "To disable the kernel module, once you boot from the installation media, select the 'Installation' entry in grub and press 'e' to edit the parameters. Then go to the line starting with 'linux' (or 'linuxefi') and add <literal>brokenmodules=nouveau</literal> at the end. Now press F10 to continue booting with the new parameter. After the system is installed, you can re-enable the nouveau module by editing <filename>/etc/modprobe.d/50-blacklist.conf</filename> and removing the entry that blacklists nouveau." msgstr "Для отключения модуля ядра при загрузке с установочного носителя выберите в grub пункт «Installation» («Установка») и нажмите «e» для редактирования параметров. Затем перейдите на строку, начинающуюся с «linux» (или «linuxefi»), и добавьте в конце <literal>brokenmodules=nouveau</literal>. Теперь нажмите F10, чтобы продолжить загрузку с новым параметром. После установки системы вы можете включить модуль nouveau обратно, отредактировав <filename>/etc/modprobe.d/50-blacklist.conf</filename> и удалив запись про nouveau." +#: xml/release-notes.xml:384(title) +msgid "Information About the FGLRX Driver" +msgstr "" + +#: xml/release-notes.xml:385(para) +msgid "For more information about the AMD FGLRX drivers in openSUSE 13.2 and its status, see <ulink url=\"https://lizards.opensuse.org/2014/11/01/fglrx-warning-opensuse-13-2-tumbleweed/\">https://lizards.opensuse.org/2014/11/01/fglrx-warning-opensuse-13-2-tumbleweed/</ulink>." +msgstr "" + +#. bnc#899610 +#: xml/release-notes.xml:394(title) +msgid "Second Static Mouse Pointer" +msgstr "" + +#: xml/release-notes.xml:395(para) +msgid "If you see two mouse pointers and have two graphic boards, where one is an Intel board, try uninstalling <systemitem>xf86-video-intel</systemitem> and thus using the other one only. This will make disappear the static mouse pointer." +msgstr "" + +#: xml/release-notes.xml:402(para) +msgid "This and other issues with the Intel driver like (see <ulink url=\"http://bugzilla.opensuse.org/show_bug.cgi?id=901506\">http://bugzilla.opensuse.org/show_bug.cgi?id=901506</ulink>) will be worked on and, if possible, addressed with an online update." +msgstr "" + +#. bnc#901869 +#: xml/release-notes.xml:411(title) +msgid "Missing Dependencies for virt-manager" +msgstr "" + +#: xml/release-notes.xml:412(para) +msgid "If you find a problem executing virt-manager, try installing <systemitem>typelib-1_0-Gtk-3_0</systemitem>, <systemitem>typelib-1_0-SpiceClientGtk-3_0</systemitem> and <systemitem>typelib-1-0-GtkVnc-2_0</systemitem>." +msgstr "" + +#: xml/release-notes.xml:418(para) +msgid "In the online update there will be a new version with those dependencies made explicit." +msgstr "" + +#. bnc#900813 +#: xml/release-notes.xml:425(title) +#, fuzzy +#| msgid "No Authorization" +msgid "Modem Authorization After Suspend" +msgstr "Без авторизации" + +#: xml/release-notes.xml:426(para) +msgid "openSUSE 13.2 is a more strict in security tha 13.1. If you are connected via a UMTS or 3G modem and you suspend the machine, the system will ask you for the root password before reconnecting." +msgstr "" + +#: xml/release-notes.xml:432(para) +msgid "You can change this behavior changing a line in /etc/polkit-default-privs.standard:" +msgstr "" + +#: xml/release-notes.xml:437(screen) +#, no-wrap +msgid "" +"# ModemManager\n" +"org.freedesktop.ModemManager.Device.Control auth_admin:auth_admin:yes\n" +" " +msgstr "" + +#: xml/release-notes.xml:441(para) +msgid "with:" +msgstr "" + +#: xml/release-notes.xml:445(screen) +#, no-wrap +msgid "" +"# ModemManager\n" +"org.freedesktop.ModemManager.Device.Control auth_admin_keep\n" +" " +msgstr "" + +#. bnc#901511 +#: xml/release-notes.xml:452(title) +msgid "Package Search Missing in GTK UI of YaST" +msgstr "" + +#: xml/release-notes.xml:453(para) +msgid "The GTK interface of YaST does not feature a package search box. So if you are in GNOME or XFCE and you need this feature, use QT interface instead:" +msgstr "" + +#: xml/release-notes.xml:459(screen) +#, no-wrap +msgid "sudo /sbin/yast2 --qt" +msgstr "" + #. bnc#902947 -#: xml/release-notes.xml:271(title) +#: xml/release-notes.xml:464(title) msgid "openSUSE pre-13.2 cifstab Migration" msgstr "" -#: xml/release-notes.xml:273(para) +#: xml/release-notes.xml:466(para) msgid "Mounting cifs shares at systems start via <filename>/etc/samba/cifstab</filename> has been discontinued and obsoleted. Now the generic <filename>/etc/fstab</filename> handles it." msgstr "" -#: xml/release-notes.xml:279(para) +#: xml/release-notes.xml:472(para) msgid "The migration process requires two steps:" msgstr "" -#: xml/release-notes.xml:284(para) +#: xml/release-notes.xml:477(para) msgid "Append all your mount points from <filename>/etc/samba/cifstab.rpmsave</filename> to <filename>/etc/fstab</filename>." msgstr "" -#: xml/release-notes.xml:291(para) +#: xml/release-notes.xml:484(para) msgid "Add <literal>0 0</literal> to the end of each new cifs mount line in <filename>/etc/fstab</filename>." msgstr "" -#: xml/release-notes.xml:298(para) +#: xml/release-notes.xml:491(para) msgid "For more information and examples, see <filename>/usr/share/doc/packages/cifs-utils/README.cifstab.migration</filename> in the installed system." msgstr "" +#: xml/release-notes.xml:499(title) +msgid "Removing openSUSE 13.1 KDE Wallpaper After Upgrade" +msgstr "" + +#: xml/release-notes.xml:500(para) +msgid "If the openSUSE 13.1 KDE Wallpaper still appears after the system upgrade, remove it from the user cache manually:" +msgstr "" + +#: xml/release-notes.xml:505(screen) +#, no-wrap +msgid "rm ~/.kde4/cache-*/plasma-wallpapers/usr/share/wallpapers/openSUSEdefault/contents/images/*" +msgstr "" + +#: xml/release-notes.xml:509(title) +msgid "MATE Desktop official integration" +msgstr "" + +#: xml/release-notes.xml:511(para) +msgid "The MATE desktop is now officially available under openSUSE 13.2 with MATE version 1.8.1, the latest stable release. It provides an intuitive and attractive desktop environment using traditional metaphors for Linux and other Unix-like operating systems." +msgstr "" + +#: xml/release-notes.xml:517(para) +msgid "The objective, for openSUSE, is to provide the same experience users had when they used GNOME under openSUSE 11.4, with the main-menu and the Sonar theme." +msgstr "" + +#. bnc#901013 +#: xml/release-notes.xml:525(title) +msgid "Slow Start-up in GNOME" +msgstr "" + +#: xml/release-notes.xml:526(para) +msgid "GNOME autologin can cause a slow boot process. Probably there is a race between services not correctly marked to depend on each other. Until the fix will be available as an online update, a workaround is to temporarily disable the GNOME autologin feature." +msgstr "" + #. bnc#850058 -#: xml/release-notes.xml:335(title) +#: xml/release-notes.xml:563(title) msgid "AppArmor and Permission Settings" msgstr "AppArmor и права доступа" -#: xml/release-notes.xml:336(para) +#: xml/release-notes.xml:564(para) #, fuzzy #| msgid "AppArmor is enabled by default. This means more security, but might prevent services from working, if you run them in unexpected ways. If you encounter strange permission problems, try to switch the AppArmor profile for the affected service to complain mode with:" msgid "AppArmor is enabled by default. This means more security, but might prevent services from working if you run them in unexpected ways. If you encounter strange permission problems, try to switch the AppArmor profile for the affected service to complain mode with:" msgstr "AppArmor включён по умолчанию. Это повышает уровень безопасности, но может помешать работе нестандартно запускаемых служб. Если у вас возникают странные проблемы с правами доступа, попробуйте профиль AppArmor для этой службы в щадящий режим:" -#: xml/release-notes.xml:339(screen) +#: xml/release-notes.xml:567(screen) #, no-wrap msgid "aa-complain /usr/bin/$your_service" msgstr "aa-complain /usr/bin/$ваша_служба" -#: xml/release-notes.xml:340(para) +#: xml/release-notes.xml:568(para) msgid "Complain mode means: allow everything, and log things that the profile would not allow." msgstr "Щадящий режим означает: разрешить всё, но вести журнал действий, которые запрещены профилем." -#: xml/release-notes.xml:341(para) +#: xml/release-notes.xml:569(para) #, fuzzy #| msgid "Even if it helps report it as a bug! We want to fix AppArmor profiles to cover also corner cases." msgid "Even if it helps, report it as a bug! We want to fix AppArmor profiles to also cover corner cases." msgstr "Создайте сообщение об ошибке, если это поможет: мы хотим исправить профили AppArmor, чтобы они покрывали и крайние случаи." -#: xml/release-notes.xml:374(title) +#: xml/release-notes.xml:602(title) msgid "Miscellaneous" msgstr "Разное" -#: xml/release-notes.xml:375(para) -msgid "N/A" -msgstr "N/A" +#. bnc#903243 +#: xml/release-notes.xml:607(title) +msgid "YaST (Qt GUI): \"Service Manager\" Icon Appears Twice" +msgstr "" +#: xml/release-notes.xml:608(para) +msgid "In the <guimenu>System</guimenu> section of YaST (Qt GUI) the icon <guimenu>Service Manager</guimenu> appears twice. There is a bug in the Qt version of the YaST Control Center that does not honor the <quote>hidden</quote> flag in the desktop files." +msgstr "" + +#: xml/release-notes.xml:614(para) +msgid "This will get fixed with the next YaST online update." +msgstr "" + #. bnc#809347 -#: xml/release-notes.xml:381(title) +#: xml/release-notes.xml:624(title) msgid "More Information and Feedback" msgstr "Дополнительные сведения и обратная связь" -#: xml/release-notes.xml:385(para) +#: xml/release-notes.xml:628(para) msgid "Read the READMEs on the CDs." msgstr "Читать файлы README на CD." -#: xml/release-notes.xml:388(para) +#: xml/release-notes.xml:631(para) msgid "Get detailed changelog information about a particular package from the RPM:" msgstr "Получить подробный журнал изменений конкретного пакета с помощью RPM:" -#: xml/release-notes.xml:389(screen) +#: xml/release-notes.xml:632(screen) #, no-wrap msgid "rpm --changelog -qp <FILENAME>.rpm" msgstr "rpm --changelog -qp <ИМЯ_ФАЙЛА>.rpm" -#: xml/release-notes.xml:390(para) +#: xml/release-notes.xml:633(para) msgid "<FILENAME>. is the name of the RPM." msgstr "<ИМЯ_ФАЙЛА>. — это имя пакета RPM." -#: xml/release-notes.xml:393(para) +#: xml/release-notes.xml:636(para) msgid "Check the <filename>ChangeLog</filename> file in the top level of the DVD for a chronological log of all changes made to the updated packages." msgstr "Хронологический журнал всех изменений в обновлённых пакетах приведён в файле <filename>ChangeLog</filename> на верхнем уровне DVD." -#: xml/release-notes.xml:397(para) +#: xml/release-notes.xml:640(para) msgid "Find more information in the <filename>docu</filename> directory on the DVD." msgstr "Больше сведений вы найдёте в каталоге <filename>docu</filename> на DVD." -#: xml/release-notes.xml:400(para) +#: xml/release-notes.xml:643(para) msgid "<ulink url=\"https://activedoc.opensuse.org/\"/> contains additional or updated documentation." msgstr "Дополнительная и обновлённая документация на сайте <ulink url=\"https://activedoc.opensuse.org/\"/>." -#: xml/release-notes.xml:405(para) +#: xml/release-notes.xml:648(para) msgid "Visit <ulink url=\"http://www.opensuse.org\"/> for the latest product news from openSUSE." msgstr "Последние новости от openSUSE на сайте <ulink url=\"http://www.opensuse.org\"/>." -#: xml/release-notes.xml:410(para) +#: xml/release-notes.xml:653(para) msgid "Copyright © 2014 SUSE LLC" msgstr "Авторские права © 2014 SUSE LLC" -#: xml/release-notes.xml:412(para) +#: xml/release-notes.xml:655(para) msgid "Thanks for using openSUSE." msgstr "Спасибо за использование openSUSE." -#: xml/release-notes.xml:413(para) +#: xml/release-notes.xml:656(para) msgid "The openSUSE Team." msgstr "Команда openSUSE." @@ -246,6 +491,9 @@ "Переводчики:\n" "Александр Мелентьев <minton@opensuse.org>, 2008-2013. Отдельная благодарность Илье Барило за контроль качества <http://sourcelocalizer.ru>, 2013" +#~ msgid "N/A" +#~ msgstr "N/A" + #~ msgid "For Detailed Installation Information" #~ msgstr "Подробные сведения об установке" @@ -563,9 +811,6 @@ #~ msgid "command. It causes the creation of a <literal>network.service</literal> alias link pointing to the <literal>NetworkManager.service</literal>, and thus deactivates the <filename>/etc/init.d/network</filename> script. The command" #~ msgstr "Выполнение данной команды приведёт к созданию ссылки-псевдонима <literal>network.service</literal>, указывающей на <literal>NetworkManager.service</literal> и отключающей скрипт <filename>/etc/init.d/network</filename>. Команда" -#~ msgid "systemctl -p Id show network.service" -#~ msgstr "systemctl -p Id show network.service" - #~ msgid "allows to query the currently selected network service." #~ msgstr "позволяет опросить выбранную в данный момент сетевую службу." @@ -616,9 +861,6 @@ #~ msgid "Start the <command>/etc/init.d/network</command> service: <screen>systemctl start network.service</screen>" #~ msgstr "Запустите службу <command>/etc/init.d/network</command>: <screen>systemctl start network.service</screen>" -#~ msgid "To query the currently selected service, use:" -#~ msgstr "Для опроса выбранной в данный момент сетевой службы:" - #~ msgid "systemctl -p Id show network.service" #~ msgstr "systemctl -p Id show network.service" -- To unsubscribe, e-mail: opensuse-translation-commit+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-translation-commit+owner@opensuse.org