[opensuse-translation-commit] r97297 - branches/SLE12-SP3/yast/ar/po
= \"</b><i>اسم المضيف</i><b>\"</b>\n</p><p>يُستخدم عند استخدام فحص تفاوض مع أسلوب <small>HTTP</small> أو <small>HTTPS</small>. تعيين عنوان المضيف المستخدم في طلب <small>HTTP</small>. في حالة الأسلوب <small>HTTPS</small>، عامةً ما يحتاج إلى مطابقة الاسم الشائع لشهادة <small>SSL</small>. إذا لم يتم تعيين عنوان المضيف، فسيتم اشتقاقه\nمن عنوان url الخاص بالطلب للخادم الفعلي إذا كان موجودًا. وكحل أخير، سيُستخدم عنوان <small>IP</small> للخادم الفعلي. \n\n\n</p><p><b><big>تسجيل الدخول</big> = \"</b><i>اسم المستخدم</i><b>\"</b>\n</p><p>بالنسبة للأساليب <small>FTP</small> و<small>IMAP</small> و<small>LDAP</small> وMySQL وOracle و<small>POP</small> وPostgreSQL، سيُستخدم اسم المستخدم لتسجيل الدخول.\n</p><p>بالنسبة لأسلوب Radius، تُستخدم كلمة السر للسمة \"اسم المستخدم\".\n</p><p>بالنسبة للأسلوب<small>SIP</small> ، يُستخدم اسم المستخدم كعنوان المرسل والمستلم لاستعلام <small>OPTIONS</small> .\n</p><p>الإعداد الافتراضي:\n</p></dt><dt>* <small>FTP:</small>مجهول\n</dt><dt>* MySQL Oracle وPostgreSQL: يجب تحديدها في التكوين\n</dt><dt>* <small>SIP:</small> ldirectord@<hostname>، يُشتق اسم المضيف وفقًا لخيار كلمة السر أدناه.\n</dt><dt>* خلاف ذلك: سلسلة فارعة تشير إلى أنه لن تتم محاولة مصادقة الحالة.\n\n\n</dt><dt><b><big>كلمة السر</big> = \"</b><i>كلمة السر</i><b>\"</b>\n<p>كلمة السر المطلوب استخدامها\nلتسجيل الدخول إلى الخوادم <small>FTP</small> و<small>IMAP</small> و<sma ll>LDAP</small> وMySQL وOracle و<small>POP</small> وPostgreSQL و\n<small>SIP</small>.\n</p><p>بالنسبة لخادم Radius، تُستخدم كلمة السر للسمة \"المستخدم وكلمة السر\".\n</p><p>الإعداد الافتراضي:\n</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>، حيث يعد اسم المضيف متغير البيئة <small>HOSTNAME</small> الذي يتم تقييمه في وقت التشغيل أو اشتقاقه من uname إذا لم يتم تعيينه.\n</dt><dt>* خلاف ذلك: سلسلة فارغة. في حال وجود الخوادم <small>LDAP</small> وMySQL وOracle وPostgreSQL، فإنه لن يتم إجراء المصادقة.\n\n\n</dt><dt><b><big>اسم قاعدة البيانات</big> = \"</b><i>اسم قاعدة البيانات</i><b>\"</b>\n<p>قاعدة البيانات المطلوب استخدامها للخوادم MySQL وOracle وPostgreSQL، هي التي سيُجرى الاستعلا� � (التعيين حسب<b>الاستلام</b> أعلاه) وفقًا لها. هذا هو الإعداد المطلوب..\n\n\n</p><p><b><big>سر خادم radius </big> = \"</b><i>سر خادم radius </i><b>\"</b>\n</p><p>السر المطلوب استخدامه لخوادم Radius هو الذي يُستخدم لإجراء طلب-وصول باستخدام اسم المستخدم (التعيين حسب <b>تسجيل الدخول</b> أعلاه) وكلمة السر (التعيين حسب\n<b>كلمة السر</b> أعلاه).\n</p><p>الإعداد الافتراضي: سلسلة فارغة\n\n\n</p><p><b><big>مستمر</big> =</b> <i>n</i>\n</p><p>عدد الثواني لاتصالات العميل المستمرة.\n\n\n</p><p><b><big>قناع الشبكة</big> =</b> <i>w.x.y.z</i>\n</p><p>قناع الشبكة المطلوب استخدامه للتنفيذ المتكرر لاتصالات العميل المستمرة.\n\n\n</p><p><b><big>المجدول</big> =</b> <i>scheduler_ name</i>\n</p><p>المجدول المطلوب استخدامه بواسطة <small>LVS</small> لموازنة التحميل. للحصول على أي معلومة حول المجدولات المتوفرة، الرجاء مراجعة الصفحة اليدوية <b>ipvsadm</a></b>(8).\n</p><p>الإعداد الافتراضي: \"wrr\"\n\n\n</p><p><b><big>البروتوكول</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n</p><p>البروتوكول المطلوب استخدامه. إذا تم تحديد الخادم الظاهري كمنفذ وعنوان <small>IP</small>، فيجب أن يكون البروتوكول إما tcp أوudp. إذا تم وضع علامة كجدار ناري، فيجب أن يكون\nالبروتوكول fwm.\n</p><p>الإعداد الافتراضي:\n</p></dt><dt>* إذا كان الخادم الظاهري هو منفذ وعنوان <small>IP</small> ولم يكن المنفذ 53: tcp\n</dt><dt>* الخادم الظاهري هو منفذ و عنوان <small>IP</small> والمنفذ هو 53: udp\n</dt><dt>* الخادم الظاهري هو علامة جدار ناري: fwm\n</dt></dl>\n\n\n</p><p><b><big>مهلة الفحص</big> =</b> <i>n</i>\n</p><p>المهلة بالثواني لعمليات فحص أداة اختبار الاتصال والفحص الخارجي وفحص الاتصال. إذا تم تجاوز المهلة، فسيتم الإعلان عن الخادم الفعلي بأنه خامد.\n</p><p>إذا تم تحديدها في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n</p><p>إذا لم يتم تحديدها، فستُستخدم مهلة التفاوض. تعد مهلة التفاوض أيضًا قيمة عمومية يمكن تجاوزها بواسطة كل إعداد ظاهري.\n</p><p>إذا لم يتم تعيين كل من مهلة الفحص ومهلة التفاوض، فسيُستخدم الإعداد الافتراضي.\n</p><p>الإعداد ال افتراضي: 5 ثوانٍ\n\n</p><p><b><big>مهلة التفاوض</big> =</b> <i>n</i>\n</p><p>المهلة بالثواني لعمليات فحص التفاوض.\n</p><p>إذا تم تحديدها في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n</p><p>إذا لم يتم تحديدها، فستُستخدم قيمة مهلة الاتصال. تعد مهلة الاتصال أيضًا قيمة عمومية يمكن تجاوزها بواسطة كل إعداد ظاهري.\n</p><p>إذا لم يتم تعيين كل من مهلة التفاوض ومهلة الاتصال، فسيُستخدم الإعداد الافتراضي.\n</p><p>الإعداد الافتراضي: 30 ثانية\n\n</p><p><b><big>عدد مرات الفشل</big> =</b> <i>n</i>\n</p><p>سيتم الإبلاغ عن عدد المرات المتتالية للفشل عن طريق إجراء عملية فحص قبل اعتبار الاتصال بالخادم الفعلي ف� �شل. ستشير القيمة 1 إلى اعتبار الاتصال بالخادم الفعلي فاشل من محاولة الفشل الأولى. سيعمل الفحص الناجح على إعادة تعيين عدّاد مرات الفشل إلى 0.\n</p><p>إذا تم تحديده في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n</p><p>الإعداد الافتراضي: 1\n\n</p><p><b><big>تنبيه البريد الإلكتروني</big> = \"</b><i>عنوان البريد الإلكتروني</i><b>\"</b>\n</p><p>هو عنوان بريد إلكتروني صالح لإرسال تنبيهات حول حالة الاتصال التي تم تغييرها إلى أي خادم فعلي محدد في الخدمة الظاهرية. يتطلب هذا الخيار تثبيت MailTools لكلl\nوحدة النمطية. محاولة إرسال البريد الإلكتروني تلقائيًا باستخدام أي من الأساليب ال مضمنة. راجع perldoc Mail::Mailer لمزيد من المعلومات حول الأساليب.\n</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n\n</p><p><b><big>تكرار تنبيهات البريد الإلكتروني</big> =</b> <i>n</i>\n</p><p>هو التأخير بالثواني بين تنبيهات البريد الإلكتروني المتكررة إذا ما زال الخادم الفعلي المحدد في الخدمة الظاهرية لا يمكن الوصول إليه. سيعمل إعداد الثواني الصفرية على منع التنبيهات المتكررة. تعتمد دقة توقيت البريد الإلكتروني لهذا الإعداد على عدد الثواني المحددة في خيار\nتكوين الفاصل الزمني للفحص.\n</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة ا لعمومية.\n</p><p>الإعداد الافتراضي: 0\n\n</p><p><b><big>حالة تنبيه البريد الإلكتروني</big> = الكل</b>|<b>بلا</b>|<b>بدء</b>|<b>تشغيل</b>|<b>إيقاف</b>|<b>إعادة تحميل</b>,...\n</p><p>قائمة حالات الخادم المفصولة بفواصل حيث ينبغي إرسال تنبيهات البريد الإلكتروني. حالة <b>الكل</b> هي موجز لتنفيذ الحالات \n\"<b>بدء</b>،<b>تشغيل</b>،<b>إيقاف</b>،<b>إعادة تحميل</b>\". إذا تم تحديد الحالة <b>بلا</b>، فلن يتم تحديد أي خيار آخر، أو بخلاف ذلك، ستكون الخيارات ored\nمع بعضها البعض.\n</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n</p><p>الإعداد الافتراضي: الكل\n\n</p><p><b><big>احتياطي</big> =</b> <i>ip_address|hostnam e[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n</p><p>الخادم الذي تتم إعادة توجيه خدمة ويب إليه إذا تعطلت الخوادم الفعلية. عادةً ما سيكون ذلك 127.0.0.1 مع صفحة طارئة.\n</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n\n</p><p><b><big>اختبار الحالة الثابتة</big> = نعم</b>|<b>لا</b>\n</p><p>إذا تم تحديد <i>نعم</i>، فإنه عند تحديد أن الخوادم الفعلية أو الإرجاع متعطلة، لا تتم إزالتها من جدول <small>LVS</small> في kernel.\nوبخلاف ذلك، سيتم تعيين وزنها إلى صفر مما يعني أنه لن يتم قبول أي اتصالات جديدة.\n</p><p>فهذا يتضمن الأثر الجانبي، حيث إنه إذا كان الخادم الفعلي يتضمن اتصالات مس تمرة، فستتم متابعة إعادة توجيه الاتصالات الجديدة من أي أجهزة عميلة موجودة إلى\nالخادم الفعلي، إلى أن تنتهي مهلة الاستمرار. راجع ipvsadm لمزيد من المعلومات حول الاتصالات المستمرة.\n</p><p>يمكن تفادي هذا الأثر الجانبي عن طريق تشغيل ما يلي:\n</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n</p><p>إذا لم يكن الملف proc موجودًا، فقد يشير ذلك إلى أن kernel لا يتمتع بدعم lvs؛ حيث إنه لم يتم تحميل دعم <small>LVS</small> أو أن إصدار kernel قديم للغاية ليتضمن ملف proc. ينبغي أن يعمل تشغيل ipvsadm كجذر على تحميل <small>LVS</small> في kernel إن أمكن.\n</p><p>إذا تم تحديد <i>لا</i>، فستتم إزالة الخوادم الفعلية أو الإرجاع م� � جدول <small>LVS</small> في kernel. الإعداد الافتراضي هو <i>نعم</i>.\n</p><p>في حالة التحديد في قسم خادم ظاهري، يتم تجاوز القيمة العامة.\n</p><p>الإعداد الافتراضي: <i>نعم</i>\n\n\n\n"
\nللحصول على تفاصيل، راجع مقالة قاعدة بيانات دعم openSUSE\nطباعة الإعدادات بواسطة CUPS) المتوفرة على<br>\nhttp://en.opensuse.org/SDB:Print_Settings_with_CUPS\n</p>"
Author: kezz90
Date: 2017-04-19 08:53:17 +0000 (Wed, 19 Apr 2017)
New Revision: 97297
Modified:
branches/SLE12-SP3/yast/ar/po/add-on-creator.ar.po
branches/SLE12-SP3/yast/ar/po/add-on.ar.po
branches/SLE12-SP3/yast/ar/po/audit-laf.ar.po
branches/SLE12-SP3/yast/ar/po/auth-client.ar.po
branches/SLE12-SP3/yast/ar/po/auth-server.ar.po
branches/SLE12-SP3/yast/ar/po/autoinst.ar.po
branches/SLE12-SP3/yast/ar/po/base.ar.po
branches/SLE12-SP3/yast/ar/po/bootloader.ar.po
branches/SLE12-SP3/yast/ar/po/ca-management.ar.po
branches/SLE12-SP3/yast/ar/po/cio.ar.po
branches/SLE12-SP3/yast/ar/po/cluster.ar.po
branches/SLE12-SP3/yast/ar/po/control-center.ar.po
branches/SLE12-SP3/yast/ar/po/control.ar.po
branches/SLE12-SP3/yast/ar/po/country.ar.po
branches/SLE12-SP3/yast/ar/po/dhcp-server.ar.po
branches/SLE12-SP3/yast/ar/po/dns-server.ar.po
branches/SLE12-SP3/yast/ar/po/docker.ar.po
branches/SLE12-SP3/yast/ar/po/drbd.ar.po
branches/SLE12-SP3/yast/ar/po/fcoe-client.ar.po
branches/SLE12-SP3/yast/ar/po/firewall-services.ar.po
branches/SLE12-SP3/yast/ar/po/firewall.ar.po
branches/SLE12-SP3/yast/ar/po/firstboot.ar.po
branches/SLE12-SP3/yast/ar/po/ftp-server.ar.po
branches/SLE12-SP3/yast/ar/po/geo-cluster.ar.po
branches/SLE12-SP3/yast/ar/po/http-server.ar.po
branches/SLE12-SP3/yast/ar/po/inetd.ar.po
branches/SLE12-SP3/yast/ar/po/installation.ar.po
branches/SLE12-SP3/yast/ar/po/instserver.ar.po
branches/SLE12-SP3/yast/ar/po/iplb.ar.po
branches/SLE12-SP3/yast/ar/po/iscsi-client.ar.po
branches/SLE12-SP3/yast/ar/po/iscsi-lio-server.ar.po
branches/SLE12-SP3/yast/ar/po/isns.ar.po
branches/SLE12-SP3/yast/ar/po/kdump.ar.po
branches/SLE12-SP3/yast/ar/po/ldap-client.ar.po
branches/SLE12-SP3/yast/ar/po/ldap.ar.po
branches/SLE12-SP3/yast/ar/po/mail.ar.po
branches/SLE12-SP3/yast/ar/po/migration.ar.po
branches/SLE12-SP3/yast/ar/po/multipath.ar.po
branches/SLE12-SP3/yast/ar/po/ncurses-pkg.ar.po
branches/SLE12-SP3/yast/ar/po/network.ar.po
branches/SLE12-SP3/yast/ar/po/nfs.ar.po
branches/SLE12-SP3/yast/ar/po/nfs_server.ar.po
branches/SLE12-SP3/yast/ar/po/nis.ar.po
branches/SLE12-SP3/yast/ar/po/nis_server.ar.po
branches/SLE12-SP3/yast/ar/po/ntp-client.ar.po
branches/SLE12-SP3/yast/ar/po/online-update-configuration.ar.po
branches/SLE12-SP3/yast/ar/po/online-update.ar.po
branches/SLE12-SP3/yast/ar/po/packager.ar.po
branches/SLE12-SP3/yast/ar/po/pam.ar.po
branches/SLE12-SP3/yast/ar/po/pkg-bindings.ar.po
branches/SLE12-SP3/yast/ar/po/printer.ar.po
branches/SLE12-SP3/yast/ar/po/product-creator.ar.po
branches/SLE12-SP3/yast/ar/po/proxy.ar.po
branches/SLE12-SP3/yast/ar/po/qt-pkg.ar.po
branches/SLE12-SP3/yast/ar/po/qt.ar.po
branches/SLE12-SP3/yast/ar/po/rdp.ar.po
branches/SLE12-SP3/yast/ar/po/rear.ar.po
branches/SLE12-SP3/yast/ar/po/registration.ar.po
branches/SLE12-SP3/yast/ar/po/reipl.ar.po
branches/SLE12-SP3/yast/ar/po/relocation-server.ar.po
branches/SLE12-SP3/yast/ar/po/s390.ar.po
branches/SLE12-SP3/yast/ar/po/samba-client.ar.po
branches/SLE12-SP3/yast/ar/po/samba-server.ar.po
branches/SLE12-SP3/yast/ar/po/samba-users.ar.po
branches/SLE12-SP3/yast/ar/po/scanner.ar.po
branches/SLE12-SP3/yast/ar/po/security.ar.po
branches/SLE12-SP3/yast/ar/po/services-manager.ar.po
branches/SLE12-SP3/yast/ar/po/slp-server.ar.po
branches/SLE12-SP3/yast/ar/po/smt.ar.po
branches/SLE12-SP3/yast/ar/po/snapper.ar.po
branches/SLE12-SP3/yast/ar/po/sound.ar.po
branches/SLE12-SP3/yast/ar/po/squid.ar.po
branches/SLE12-SP3/yast/ar/po/sshd.ar.po
branches/SLE12-SP3/yast/ar/po/storage.ar.po
branches/SLE12-SP3/yast/ar/po/sudo.ar.po
branches/SLE12-SP3/yast/ar/po/support.ar.po
branches/SLE12-SP3/yast/ar/po/sysconfig.ar.po
branches/SLE12-SP3/yast/ar/po/tftp-server.ar.po
branches/SLE12-SP3/yast/ar/po/timezone_db.ar.po
branches/SLE12-SP3/yast/ar/po/tune.ar.po
branches/SLE12-SP3/yast/ar/po/update.ar.po
branches/SLE12-SP3/yast/ar/po/users.ar.po
branches/SLE12-SP3/yast/ar/po/vm.ar.po
branches/SLE12-SP3/yast/ar/po/vpn.ar.po
branches/SLE12-SP3/yast/ar/po/wol.ar.po
branches/SLE12-SP3/yast/ar/po/xpram.ar.po
branches/SLE12-SP3/yast/ar/po/yast2-apparmor.ar.po
Log:
Vendor update:SLE12SP3 Localization update: Translation Drop1 - msgcat applied to the files
Modified: branches/SLE12-SP3/yast/ar/po/add-on-creator.ar.po
===================================================================
--- branches/SLE12-SP3/yast/ar/po/add-on-creator.ar.po 2017-04-19 08:50:37 UTC (rev 97296)
+++ branches/SLE12-SP3/yast/ar/po/add-on-creator.ar.po 2017-04-19 08:53:17 UTC (rev 97297)
@@ -1,487 +1,501 @@
# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
# This file is distributed under the same license as the package.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: add-on-creator\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2016-08-30 18:26+0200\n"
-"PO-Revision-Date: 2017-04-18 14:10\n"
-"Last-Translator: Novell language
- \n<dt>* Virtual server port is 21: ftp\n</dt><dt>* Virtual server port is 25: smtp\n</dt><dt>* Virtual server port is 53: dns\n</dt><dt>* Virtual server port is 80: http\n</dt><dt>* Virtual server port is 110: pop\n</dt><dt>* Virtual server port is 119: nntp\n</dt><dt>* Virtual server port is 143: imap\n</dt><dt>* Virtual server port is 389: ldap\n</dt><dt>* Virtual server port is 443: https\n</dt><dt>* Virtual server port is 993: imaps\n</dt><dt>* Virtual server port is 995: pops\n</dt><dt>* Virtual server port is 1521: oracle\n</dt><dt>* Virtual server port is 1812: radius\n</dt><dt>* Virtual server port is 3306: mysql\n</dt><dt>* Virtual server port is 5432: pgsql\n</dt><dt>* Virtual server port is 5060: sip\n</dt><dt>* Oth
erwise: none\n\n\n</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n<p>This setting is used if checktype is external and is the command to be run to check the status of a real server. It should exit with status 0 if everything\nis ok, or non-zero otherwise.\n</p><p>Four parameters are passed to the script:\n</p></dt><dt>* virtual server ip/firewall mark\n</dt><dt>* virtual server port\n</dt><dt>* real server ip\n</dt><dt>* real server port\n</dt><dt>Default: /bin/true\n\n\n<p><b><big>check port</big> =</b> <i>n</i>\n</p><p>Number of port to monitor. Sometimes check port differs from service port.\n</p><p>Default: port specified for each real server\n\n\n</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\"</b>\n</p><p>This object will be requested each checkinterval seconds on each real server. The string must be inside quotes. Note that this string may be overridden by\nan optional per real-server based request-string.\n</p><p>For a <sm
all>DNS</small> check this should the name of an A record, or the address of a <small>PTR</small> record to look up.\n</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL</small> query. The data returned is not checked, only that the answer is one or more\nrows. This is a required setting.\n</p><p>For a simpletcp check, this string is sent verbatim except any occurances of \n are replaced with a new line character.\n\n\n</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n</p><p>If the requested result contains this <i>regexp to compare</i>, the real server is declared alive. The regexp must be inside quotes. Keep in mind that\nregexps are not plain strings and that you need to escape the special characters if they should as literals. Note that this regexp may be overridden by an\noptional per real-server based receive regexp.\n</p><p>For a <small>DNS</small> check this should be any one the A record's addresses or any one of the <small>PTR<
/small> record's names.\n</p><p>For a MySQL check, the receive setting is not used.\n\n\n</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n</p><p>Sets the <small>HTTP</small> method which should be used to fetch the <small>URI</small> specified in the request-string. <small>GET</small> is the\nmethod used by default if the parameter is not set. If <small>HEAD</small> is used, the receive-string should be unset.\n</p><p>Default: <small>GET</small>\n\n\n</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n</p><p>Used when using a negotiate check with <small>HTTP</small> or <small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> request. In the\ncase of <small>HTTPS</small> this generally needs to match the common name of the <small>SSL</small> certificate. If not set then the host header will be\nderived from the request url for the real server if present. As a last resort the <small>IP</small> address of the rea
l server will be used.\n\n\n</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log in.\n</p><p>For Radius the passwd is used for the attribute User-Name.\n</p><p>For <small>SIP</small> , the username is used as both the to and from address for an <small>OPTIONS</small> query.\n</p><p>Default:\n</p></dt><dt>* <small>FTP:</small> Anonymous\n</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the configuration\n</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is derived as per the passwd option below.\n</dt><dt>* Otherwise: empty string, which denotes that case authentication will not be attempted.\n\n\n</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , MySQL, Oracle, <small>POP</small> , Post
greSQL and\n<small>SIP</small> servers.\n</p><p>For Radius the passwd is used for the attribute User-Password.\n</p><p>Default:\n</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where hostname is the environment variable <small>HOSTNAME</small> evaluated at run time, or sourced\nfrom uname if unset.\n</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , MySQL, Oracle, and PostgreSQL this means that authentication will not be performed.\n\n\n</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the database that the query (set by <b>receive</b> above) will be performed against. This\nis a required setting.\n\n\n</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n</p><p>Secret to use for Radius servers, this is the secret used to perform an Access-Request with the username (set by <b>login</b> above) and passwd (set by\n<b>passwd</b> above).\
n</p><p>Default: empty string\n\n\n</p><p><b><big>persistent</big> =</b> <i>n</i>\n</p><p>Number of seconds for persistent client connections.\n\n\n</p><p><b><big>netmask</big> =</b> <i>w.x.y.z</i>\n</p><p>Netmask to be used for granularity of persistent client connections.\n\n\n</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n</p><p>Default: \"wrr\"\n\n\n</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n</p><p>Protocol to be used. If the virtual is specified as an <small>IP</small> address and port then it must be one of tcp or udp. If a firewall mark then the\nprotocol must be fwm.\n</p><p>Default:\n</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the port is not 53: tcp\n</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is 53: udp\n
</dt><dt>* Virtual is a firewall mark: fwm\n</dt></dl>\n\n\n</p><p><b><big>check timeout</big> =</b> <i>n</i>\n</p><p>Timeout in seconds for connect, external and ping checks. If the timeout is exceeded then the real server is declared dead.\n</p><p>If defined in a virtual server section then the global value is overridden.\n</p><p>If undefined then the value of negotiatetimeout is used. negotiatetimeout is also a global value that may be overriden by a per-virtual setting.\n</p><p>If both checktimeout and negotiatetimeout are unset, the default is used.\n</p><p>Default: 5 seconds\n\n</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n</p><p>Timeout in seconds for negotiate checks.\n</p><p>If defined in a virtual server section then the global value is overridden.\n</p><p>If undefined then the value of connecttimeout is used. connecttimeout is also a global value that may be overriden by a per-virtual setting.\n</p><p>If both negotiatetimeout and connecttimeout are unset, the def
ault is used.\n</p><p>Default: 30 seconds\n\n</p><p><b><big>failure count</big> =</b> <i>n</i>\n</p><p>The number of consecutive times a failure will have to be reported by a check before the realserver is considered to have failed. A value of 1 will have the realserver considered failed on the first failure. A successful check will reset the failure counter to 0.\n</p><p>If defined in a virtual server section then the global value is overridden.\n</p><p>Default: 1\n\n</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n</p><p>A valid email address for sending alerts about the changed connection status to any real server defined in the virtual service. This option requires perl\nmodule MailTools to be installed. Automatically tries to send email using any of the built-in methods. See perldoc Mail::Mailer for more info on methods.\n</p><p>If defined in a virtual server section then the global value is overridden.\n\n</p><p><b><big>email alert freq</big> =</b> <i>n
</i>\n</p><p>Delay in seconds between repeating email alerts while any given real server in the virtual service remains inaccessible. A setting of zero seconds will\ninhibit the repeating alerts. The email timing accuracy of this setting is dependent on the number of seconds defined in the checkinterval configuration\noption.\n</p><p>If defined in a virtual server section then the global value is overridden.\n</p><p>Default: 0\n\n</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting</b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n</p><p>Comma delimited list of server states in which email alerts should be sent. <b>all</b> is a short-hand for\n\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If <b>none</b> is specified, no other option may be specified, otherwise options are ORed\nwith each other.\n</p><p>If defined in a virtual server section then the global value is overridden.\n</p><p>Default: all\n\n</p><p><b><big>fallback</big> =<
/b> <i>ip_address|hostname[:portnumber|sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n</p><p>the server onto which a webservice is redirected if all real servers are down. Typically this would be 127.0.0.1 with an emergency page.\n</p><p>If defined in a virtual server section then the global value is overridden.\n\n</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n</p><p>If <i>yes</i>, then when real or failback servers are determined to be down, they are not actually removed from the kernel's <small>LVS</small> table.\nRather, their weight is set to zero which means that no new connections will be accepted.\n</p><p>This has the side effect, that if the real server has persistent connections, new connections from any existing clients will continue to be routed to the\nreal server, until the persistant timeout can expire. See ipvsadm for more information on persistant connections.\n</p><p>This side-effect can be avoided by running the following:\n</p><p>echo 1 > /proc/
sys/net/ipv4/vs/expire_quiescent_template\n</p><p>If the proc file isn't present this probably means that the kernel doesn't have lvs support, <small>LVS</small> support isn't loaded, or the kernel is too\nold to have the proc file. Running ipvsadm as root should load <small>LVS</small> into the kernel if it is possible.\n</p><p>If <i>no</i>, then the real or failback servers will be removed from the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n</p><p>If defined in a virtual server section then the global value is overridden.\n</p><p>Default: <i>yes</i>\n\n\n\n"
-msgstr "\n<p><b><big>الخادم الظاهري</big> =</b> <i>(ip_address|hostname:portnumber|servicename)|firewall-mark</i>\n</p><p>تحديد خادم وهمي عن طريق عنوان IP (أو اسم المضيف) والمدخل (أو اسم الخدمة) أو علامة الجدار الناري. علامة الجدار الناري هي عدد صحيح أكبر من صفر. يتم التحكم في\nتكوين حزم العلامات باستخدام خيار <tt>\"-m\"</tt> لـ <b>ipchains</b>(8). يجب أن تتبع كافة الإشارات والخدمات الفعلية لخدمة ظاهرية\nهذا السطر فورًا وأن تكون محددة..\n\n\n</p><p><b><big>الخوادم الفعلية</big> =</b> <i>ip_address|hostname[->ip_address|hostname][:portnumber|servicename</i>]\n<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request</i><b>\", \"</b><i>receive</i><b>\"</b>]\n</p><p>تحديد\nخدمة فعلية حسب عنوان IP (أو �
�سم المضيف) والمنفذ (أو اسم الخدمة). إذا كان المنفذ محذوفًا، فسيُستخدم الرقم 0، وسيتم تحديد ذلك بشكل أساسي لخدمات\nfwmark حيث يتم تجاهل منفذ الخوادم الفعلية.\nسيتم تحديد مجموعة من عناوين <small>IP</small> أو (اسمين مضيفين) اختياريًا، حيث سيتم التعامل مع كل عنوان\nمن عناوين <small>IP</small> في المجموعة كخادم فعلي باستخدام المنفذ المحدد. تحدد الوسيطة الثانية أسلوب إعادة التوجيه،\nحيث يجب أن يكون\n<b>gate</b> أو <b>ipip\n<dt>* منفذ الخادم الظاهري هو 21: ftp\n</dt><dt>* منفذ الخادم الظاهري هو 25: smtp\n</dt><dt>* منفذ الخادم الظاهري هو 53: dns\n</dt><dt>* منفذ الخادم الظاهري هو 80: http\n</dt><dt>* منفذ الخادم الظاهري هو 110: pop\n</dt><dt>* منفذ الخادم الظاهري هو 119: nntp\n</dt><dt>* منفذ الخادم الظاهري هو 143: imap\n</dt><dt>* منفذ الخادم الظاهري هو 389: ldap\n</dt><dt>* منفذ الخادم الظاهري هو 443: https\n</dt><dt>* منفذ الخادم الظاهري هو 993: imaps\n</dt><dt>* منفذ الخادم الظاهري هو 995: pop\n</dt><dt>* منفذ الخادم الظاهري هو 1521: oracle\n
</dt><dt>* منفذ الخادم الظاهري هو 1812: radius\n</dt><dt>* منفذ الخادم الظاهري هو 3306: mysql\n</dt><dt>* منفذ الخادم الظاهري هو 5432: pgsql\n</dt><dt>* منفذ الخادم الظاهري هو 5060: sip\n</dt><dt>* خلاف ذلك: none\n\n\n</dt><dt><b><big>أمر الفحص</big> = \"</b><i>مسار البرنامج النصي</i><b>\"</b>\n<p>يُستخدم هذا الإعداد إذا كان نوع الفحص خارجي وكان مطلوب تشغيل الأمر للتحقق من حالة خادم فعلي. ينبغي أن يتم الخروج بالحالة 0 إذا كان كل شيء\nعلى ما يرام أو كان أي رقم بخلاف الصفر. \n</p><p>يتم تمرير 4 معلمات على البرنامج النصي:\n</p></dt><dt>* علامة ip/الجدار الناري للخادم الظاهري\n</dt><dt>* منفذ الخادم الظاهري\n</dt><dt>* ip للخادم الظاهري\n</dt><dt>* من�
�ذ الخادم الظاهري\n</dt><dt>الإعداد الافتراضي: /bin/صواب\n\n\n<p><b><big>منفذ الفحص</big> =</b> <i>n</i>\n</p><p>رقم المنفذ للمراقبة. أحيانًا يختلف منفذ الفحص عن منفذ الخدمة. \n</p><p>الإعداد الافتراضي: المنفذ المحدد لكل خادم فعلي\n\n\n</p><p><b><big>الطلب</big> = \"</b><i>uri لطلب الكائن</i><b>\"</b>\n</p><p>سيتطلب هذا الكائن كل ثانية في الفاصل الزمني للفحص في كل خادم فعلي. يجب وضع السلسلة داخل علامتي اقتباس.\nلاحظ أنه يمكن تجاوز هذه السلسلة\nاختياريًا وفقًا لكل خادم فعلي مستند إلى سلسلة الطلب. \n</p><p>بالنسبة لفحص<small>DNS</small> ، ينبغي أن يكون اسم سجل A أو عنوان سجل <small>PTR</small> للبحث عنه.\n</p><p>بالنسبة لفحص MySQL �
�و Oracle أو PostgeSQL، ينبغي أن يكون استعلام <small>SQL</small>. لم يتم فحص البيانات المرتجعة، والرد عبارة عن صف واحد أو أكثر فحسب. هذا هو الإعداد المطلوب.\n</p><p>بالنسبة لفحصsimpletcp ، يتم إرسال هذه السلسلة حرفية فيما عدا استبدال أي أحداث بحرف سطر جديد.\n\n\n</p><p><b><big>استلام</big> = \"</b><i>regexp للمقارنة</i><b>\"</b>\n</p><p>إذا كانت النتيجة المطلوبة تتضمن <i>regexp هذا للمقارنة</i>، يتم الإعلان عن استمرار اتصال الخادم الفعلي. يجب وضع regexp داخل علامتي اقتباس. تذكر أن\nregexps لا تعتبر سلاسل عادية مما تتطلب منك تفادي الأحرف الخاصة إذا كان ينبغي استخدامها كبيانات حرفية. لاحظ أنه يمكن تجاوز regexp هذا\
nاختياريًا وفقًا لكل خادم فعلي مستند إلى regexp للاستلام.\n</p><p>بالنسبة لفحص<small>DNS</small> ، ينبغي أن يكون ذلك أي من عناوين سجل A أو أي من أسماء سجل <small>PTR</small> .\n</p><p>بالنسبة لفحصMySQL ، لن يُستخدم إعداد الاستلام.\n\n\n</p><p><b><big> أسلوبhttp</big> = <small>GET</small></b> | <b><small>HEAD</small></b>\n</p><p>تعيين أسلوب <small>HTTP</small> الذي ينبغي استخدامه لإحضار عنوان <small>URI</small> المحدد في سلسلة الطلب. يعد <small>GET</small> الأسلوب المستخدم افتراضيًا إذا لم يتم تعيين المعلمة. إذا تم استخدام الأسلوب<small>HEAD</small> ، فينبغي ألا يتم تعيين سلسلة الاستلام.\n</p><p>الإعداد الافتراضي: <small>GET</small>\n\n\n</p><p><b><big>المضيف الظاهري<b>\", \"</b><i>receive</i><b>\"</b>]\n"
+"</p><p>Defines a real service by IP-address (or hostname) and port (or "
+"servicename). If the port is omitted then a 0 will be used, this is intended "
+"primarily for\n"
+"fwmark services where the port for real servers is ignored. Optionally a "
+"range of <small>IP</small> addresses (or two hostnames) may be given, in "
+"which case\n"
+"each <small>IP</small> address in the range will be treated as a real server "
+"using the given port. The second argument defines the forwarding method, "
+"must be\n"
+"<b>gate</b>, <b>ipip</b> or <b>masq</b>. The thrid argument is optional and "
+"defines the weight for that real server. If omitted then a weight of 1 will "
+"be\n"
+"used. The last two arguments are also optional. They define a request-"
+"receive pair to be used to check if a server is alive. They override the "
+"request-receive\n"
+"pair in the virtual server section. These two strings must be quoted. If the "
+"request string starts with http://... the IP-address and port of the real\n"
+"server is overridden, otherwise the IP-address and port of the real server "
+"is used.\n"
+"</p><p>For <small>TCP</small> and <small>UDP</small> (non fwmark) virtual "
+"services, unless the forwarding method is masq and the <small>IP</small> "
+"address of a\n"
+"real server is non-local (not present on a interface on the host running "
+"ldirectord) then the port of the real server will be set to that of its "
+"virtual\n"
+"service. That is, port-mapping is only available to if the real server is "
+"another machine and the forwarding method is masq. This is due to the way "
+"that the\n"
+"underlying <small>LVS</small> code in the kernel functions.\n"
+"</p><p>More than one of these entries may be inside a virtual section. The "
+"checktimeout, negotiatetimeout, failurecount, fallback, emailalert, "
+"emailalertfreq and\n"
+"quiescent options listed above may also appear inside a virtual section, in "
+"which case the global setting is overridden.\n"
+"\n"
+"\n"
+"</p><p><b><big>check type</big> = connect</b>|<b>external</b>|<b>negotiate"
+"b>|<b>off</b>|<b>on</b>|<b>ping</b>|<b>checktimeout</b><i>N</i>\n"
+"</p><p>Type of check to perform. Negotiate sends a request and matches a "
+"receive string. Connect only attemts to make a <small>TCP/IP</small> "
+"connection, thus the\n"
+"request and receive strings may be omitted. If checktype is a number then "
+"negotiate and connect is combined so that after each N connect attempts one "
+"negotiate\n"
+"attempt is performed. This is useful to check often if a service answers and "
+"in much longer intervalls a negotiating check is done. Ping means that\n"
+"<small>ICMP</small> ping will be used to test the availability of real "
+"servers. Ping is also used as the connect check for <small>UDP</small> "
+"services. Off\n"
+"means no checking will take place and no real or fallback servers will be "
+"activated. On means no checking will take place and real servers will always "
+"be\n"
+"activated. Default is <i>negotiate</i>.\n"
+"\n"
+"\n"
+"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|"
+"<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|"
+"<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|"
+"<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n"
+"</p><p>The type of service to monitor when using checktype=negotiate. None "
+"denotes a service that will not be monitored.\n"
+"</p><p>simpletcp sends the <b>request</b> string to the server and tests it "
+"against the <b>receive</b> regexp. The other types of checks connect to the "
+"server\n"
+"using the specified protocol. Please see the <b>request</b> and <b>receive"
+"b> sections for protocol specific information.\n"
+"</p><p>Default:\n"
+"</p>
- \n"
+"<dt>* Virtual server port is 21: ftp\n"
+"</dt><dt>* Virtual server port is 25: smtp\n"
+"</dt><dt>* Virtual server port is 53: dns\n"
+"</dt><dt>* Virtual server port is 80: http\n"
+"</dt><dt>* Virtual server port is 110: pop\n"
+"</dt><dt>* Virtual server port is 119: nntp\n"
+"</dt><dt>* Virtual server port is 143: imap\n"
+"</dt><dt>* Virtual server port is 389: ldap\n"
+"</dt><dt>* Virtual server port is 443: https\n"
+"</dt><dt>* Virtual server port is 993: imaps\n"
+"</dt><dt>* Virtual server port is 995: pops\n"
+"</dt><dt>* Virtual server port is 1521: oracle\n"
+"</dt><dt>* Virtual server port is 1812: radius\n"
+"</dt><dt>* Virtual server port is 3306: mysql\n"
+"</dt><dt>* Virtual server port is 5432: pgsql\n"
+"</dt><dt>* Virtual server port is 5060: sip\n"
+"</dt><dt>* Otherwise: none\n"
+"\n"
+"\n"
+"</dt><dt><b><big>check command</big> = \"</b><i>path to script</i><b>\"</b>\n"
+"<p>This setting is used if checktype is external and is the command to be "
+"run to check the status of a real server. It should exit with status 0 if "
+"everything\n"
+"is ok, or non-zero otherwise.\n"
+"</p><p>Four parameters are passed to the script:\n"
+"</p></dt><dt>* virtual server ip/firewall mark\n"
+"</dt><dt>* virtual server port\n"
+"</dt><dt>* real server ip\n"
+"</dt><dt>* real server port\n"
+"</dt><dt>Default: /bin/true\n"
+"\n"
+"\n"
+"<p><b><big>check port</big> =</b> <i>n</i>\n"
+"</p><p>Number of port to monitor. Sometimes check port differs from service "
+"port.\n"
+"</p><p>Default: port specified for each real server\n"
+"\n"
+"\n"
+"</p><p><b><big>request</big> = \"</b><i>uri to requested object</i><b>\""
+"b>\n"
+"</p><p>This object will be requested each checkinterval seconds on each real "
+"server. The string must be inside quotes. Note that this string may be "
+"overridden by\n"
+"an optional per real-server based request-string.\n"
+"</p><p>For a <small>DNS</small> check this should the name of an A record, "
+"or the address of a <small>PTR</small> record to look up.\n"
+"</p><p>For a MySQL, Oracle or PostgeSQL check, this should be an <small>SQL"
+"small> query. The data returned is not checked, only that the answer is one "
+"or more\n"
+"rows. This is a required setting.\n"
+"</p><p>For a simpletcp check, this string is sent verbatim except any "
+"occurances of \n"
+" are replaced with a new line character.\n"
+"\n"
+"\n"
+"</p><p><b><big>receive</big> = \"</b><i>regexp to compare</i><b>\"</b>\n"
+"</p><p>If the requested result contains this <i>regexp to compare</i>, the "
+"real server is declared alive. The regexp must be inside quotes. Keep in "
+"mind that\n"
+"regexps are not plain strings and that you need to escape the special "
+"characters if they should as literals. Note that this regexp may be "
+"overridden by an\n"
+"optional per real-server based receive regexp.\n"
+"</p><p>For a <small>DNS</small> check this should be any one the A record's "
+"addresses or any one of the <small>PTR</small> record's names.\n"
+"</p><p>For a MySQL check, the receive setting is not used.\n"
+"\n"
+"\n"
+"</p><p><b><big>http method</big> = <small>GET</small></b> | <b><small>HEAD"
+"small></b>\n"
+"</p><p>Sets the <small>HTTP</small> method which should be used to fetch the "
+"<small>URI</small> specified in the request-string. <small>GET</small> is "
+"the\n"
+"method used by default if the parameter is not set. If <small>HEAD</small> "
+"is used, the receive-string should be unset.\n"
+"</p><p>Default: <small>GET</small>\n"
+"\n"
+"\n"
+"</p><p><b><big>virtual host</big> = \"</b><i>hostname</i><b>\"</b>\n"
+"</p><p>Used when using a negotiate check with <small>HTTP</small> or "
+"<small>HTTPS</small> . Sets the host header used in the <small>HTTP</small> "
+"request. In the\n"
+"case of <small>HTTPS</small> this generally needs to match the common name "
+"of the <small>SSL</small> certificate. If not set then the host header will "
+"be\n"
+"derived from the request url for the real server if present. As a last "
+"resort the <small>IP</small> address of the real server will be used.\n"
+"\n"
+"\n"
+"</p><p><b><big>login</big> = \"</b><i>username</i><b>\"</b>\n"
+"</p><p>For <small>FTP</small> , <small>IMAP</small> , <small>LDAP</small> , "
+"MySQL, Oracle, <small>POP</small> and PostgreSQL, the username used to log "
+"in.\n"
+"</p><p>For Radius the passwd is used for the attribute User-Name.\n"
+"</p><p>For <small>SIP</small> , the username is used as both the to and from "
+"address for an <small>OPTIONS</small> query.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* <small>FTP:</small> Anonymous\n"
+"</dt><dt>* MySQL Oracle, and PostgreSQL: Must be specified in the "
+"configuration\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>, hostname is "
+"derived as per the passwd option below.\n"
+"</dt><dt>* Otherwise: empty string, which denotes that case authentication "
+"will not be attempted.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>password</big> = \"</b><i>password</i><b>\"</b>\n"
+"<p>Password to use to login to <small>FTP</small> , <small>IMAP</small> , "
+"<small>LDAP</small> , MySQL, Oracle, <small>POP</small> , PostgreSQL and\n"
+"<small>SIP</small> servers.\n"
+"</p><p>For Radius the passwd is used for the attribute User-Password.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>, where "
+"hostname is the environment variable <small>HOSTNAME</small> evaluated at "
+"run time, or sourced\n"
+"from uname if unset.\n"
+"</dt><dt>* Otherwise: empty string. In the case of <small>LDAP</small> , "
+"MySQL, Oracle, and PostgreSQL this means that authentication will not be "
+"performed.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>database name</big> = \"</b><i>databasename</i><b>\"</b>\n"
+"<p>Database to use for MySQL, Oracle and PostgreSQL servers, this is the "
+"database that the query (set by <b>receive</b> above) will be performed "
+"against. This\n"
+"is a required setting.\n"
+"\n"
+"\n"
+"</p><p><b><big>radius secret</big> = \"</b><i>radiussecret</i><b>\"</b>\n"
+"</p><p>Secret to use for Radius servers, this is the secret used to perform "
+"an Access-Request with the username (set by <b>login</b> above) and passwd "
+"(set by\n"
+"<b>passwd</b> above).\n"
+"</p><p>Default: empty string\n"
+"\n"
+"\n"
+"</p><p><b><big>persistent</big> =</b> <i>n</i>\n"
+"</p><p>Number of seconds for persistent client connections.\n"
+"\n"
+"\n"
+"</p><p><b><big>netmask</big> =</b> <i>w.x.y.z</i>\n"
+"</p><p>Netmask to be used for granularity of persistent client connections.\n"
+"\n"
+"\n"
+"</p><p><b><big>scheduler</big> =</b> <i>scheduler_name</i>\n"
+"</p><p>Scheduler to be used by <small>LVS</small> for loadbalancing. For an "
+"information on the available sehedulers please see the <b>ipvsadm</a></b>(8) man page.\n"
+"</p><p>Default: \"wrr\"\n"
+"\n"
+"\n"
+"</p><p><b><big>protocol</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
+"</p><p>Protocol to be used. If the virtual is specified as an <small>IP"
+"small> address and port then it must be one of tcp or udp. If a firewall "
+"mark then the\n"
+"protocol must be fwm.\n"
+"</p><p>Default:\n"
+"</p></dt><dt>* Virtual is an <small>IP</small> address and port, and the "
+"port is not 53: tcp\n"
+"</dt><dt>* Virtual is an <small>IP</small> address and port, and the port is "
+"53: udp\n"
+"</dt><dt>* Virtual is a firewall mark: fwm\n"
+"</dt></dl>\n"
+"\n"
+"\n"
+"</p><p><b><big>check timeout</big> =</b> <i>n</i>\n"
+"</p><p>Timeout in seconds for connect, external and ping checks. If the "
+"timeout is exceeded then the real server is declared dead.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>If undefined then the value of negotiatetimeout is used. "
+"negotiatetimeout is also a global value that may be overriden by a per-"
+"virtual setting.\n"
+"</p><p>If both checktimeout and negotiatetimeout are unset, the default is "
+"used.\n"
+"</p><p>Default: 5 seconds\n"
+"\n"
+"</p><p><b><big>negotiate timeout</big> =</b> <i>n</i>\n"
+"</p><p>Timeout in seconds for negotiate checks.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>If undefined then the value of connecttimeout is used. connecttimeout "
+"is also a global value that may be overriden by a per-virtual setting.\n"
+"</p><p>If both negotiatetimeout and connecttimeout are unset, the default is "
+"used.\n"
+"</p><p>Default: 30 seconds\n"
+"\n"
+"</p><p><b><big>failure count</big> =</b> <i>n</i>\n"
+"</p><p>The number of consecutive times a failure will have to be reported by "
+"a check before the realserver is considered to have failed. A value of 1 "
+"will have the realserver considered failed on the first failure. A "
+"successful check will reset the failure counter to 0.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>Default: 1\n"
+"\n"
+"</p><p><b><big>email alert</big> = \"</b><i>emailaddress</i><b>\"</b>\n"
+"</p><p>A valid email address for sending alerts about the changed connection "
+"status to any real server defined in the virtual service. This option "
+"requires perl\n"
+"module MailTools to be installed. Automatically tries to send email using "
+"any of the built-in methods. See perldoc Mail::Mailer for more info on "
+"methods.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"\n"
+"</p><p><b><big>email alert freq</big> =</b> <i>n</i>\n"
+"</p><p>Delay in seconds between repeating email alerts while any given real "
+"server in the virtual service remains inaccessible. A setting of zero "
+"seconds will\n"
+"inhibit the repeating alerts. The email timing accuracy of this setting is "
+"dependent on the number of seconds defined in the checkinterval "
+"configuration\n"
+"option.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>Default: 0\n"
+"\n"
+"</p><p><b><big>email alert status</big> = all</b>|<b>none</b>|<b>starting"
+"b>|<b>running</b>|<b>stopping</b>|<b>reloading</b>,...\n"
+"</p><p>Comma delimited list of server states in which email alerts should be "
+"sent. <b>all</b> is a short-hand for\n"
+"\"<b>starting</b>,<b>running</b>,<b>stopping</b>,<b>reloading</b>\". If "
+"<b>none</b> is specified, no other option may be specified, otherwise "
+"options are ORed\n"
+"with each other.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>Default: all\n"
+"\n"
+"</p><p><b><big>fallback</big> =</b> <i>ip_address|hostname[:portnumber|"
+"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>the server onto which a webservice is redirected if all real servers "
+"are down. Typically this would be 127.0.0.1 with an emergency page.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"\n"
+"</p><p><b><big>quiescent</big> = yes</b>|<b>no</b>\n"
+"</p><p>If <i>yes</i>, then when real or failback servers are determined to "
+"be down, they are not actually removed from the kernel's <small>LVS</small> "
+"table.\n"
+"Rather, their weight is set to zero which means that no new connections will "
+"be accepted.\n"
+"</p><p>This has the side effect, that if the real server has persistent "
+"connections, new connections from any existing clients will continue to be "
+"routed to the\n"
+"real server, until the persistant timeout can expire. See ipvsadm for more "
+"information on persistant connections.\n"
+"</p><p>This side-effect can be avoided by running the following:\n"
+"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
+"</p><p>If the proc file isn't present this probably means that the kernel "
+"doesn't have lvs support, <small>LVS</small> support isn't loaded, or the "
+"kernel is too\n"
+"old to have the proc file. Running ipvsadm as root should load <small>LVS"
+"small> into the kernel if it is possible.\n"
+"</p><p>If <i>no</i>, then the real or failback servers will be removed from "
+"the kernel's <small>LVS</small> table. The default is <i>yes</i>.\n"
+"</p><p>If defined in a virtual server section then the global value is "
+"overridden.\n"
+"</p><p>Default: <i>yes</i>\n"
+"\n"
+"\n"
+"\n"
+msgstr ""
+"\n"
+"<p><b><big>الخادم الظاهري</big> =</b> <i>(ip_address|hostname:portnumber|"
+"servicename)|firewall-mark</i>\n"
+"</p><p>تحديد خادم وهمي عن طريق عنوان IP (أو اسم المضيف) والمدخل (أو اسم "
+"الخدمة) أو علامة الجدار الناري. علامة الجدار الناري هي عدد صحيح أكبر من صفر. "
+"يتم التحكم في\n"
+"تكوين حزم العلامات باستخدام خيار <tt>\"-m\"</tt> لـ <b>ipchains</b>(8). يجب "
+"أن تتبع كافة الإشارات والخدمات الفعلية لخدمة ظاهرية\n"
+"هذا السطر فورًا وأن تكون محددة..\n"
+"\n"
+"\n"
+"</p><p><b><big>الخوادم الفعلية</big> =</b> <i>ip_address|hostname[->"
+"ip_address|hostname][:portnumber|servicename</i>]\n"
+"<b>gate</b>|<b>masq</b>|<b>ipip</b> [<i>weight</i>] [<b>\"</b><i>request"
+"i><b>\", \"</b><i>receive</i><b>\"</b>]\n"
+"</p><p>تحديد\n"
+"خدمة فعلية حسب عنوان IP (أو اسم المضيف) والمنفذ (أو اسم الخدمة). إذا كان "
+"المنفذ محذوفًا، فسيُستخدم الرقم 0، وسيتم تحديد ذلك بشكل أساسي لخدمات\n"
+"fwmark حيث يتم تجاهل منفذ الخوادم الفعلية.\n"
+"سيتم تحديد مجموعة من عناوين <small>IP</small> أو (اسمين مضيفين) اختياريًا، "
+"حيث سيتم التعامل مع كل عنوان\n"
+"من عناوين <small>IP</small> في المجموعة كخادم فعلي باستخدام المنفذ المحدد. "
+"تحدد الوسيطة الثانية أسلوب إعادة التوجيه،\n"
+"حيث يجب أن يكون\n"
+"<b>gate</b> أو <b>ipip للخادم\n"
+"الفعلي غير محلي (غير موجود في الواجهة على المضيف الذي يشغّل ldirectord)، "
+"فسيتم تعيين الخادم الفعلي على ذلك لخدمته\n"
+"الظاهرية.\n"
+"حيث إنه لا يتوفر تعيين المنفذ إلا\n"
+"إذا كان الخادم الفعلي جهازًا آخر وأسلوب إعادة التوجيه هو masq. ويرجع هذا إلى "
+"الطريقة\n"
+"التي يعمل بها رمز\n"
+"<small>LVS</small> الأساسي في kernel.\n"
+"</p><p>قد يوجد إدخال أو أكثر من هذه الإدخالات داخل قسم ظاهري. قد تظهر أيضًا "
+"الخيارات مهلة الفحص ومهلة التفاوض وفشل العد والاحتياطي وتكرار تنبيهات البريد "
+"الإلكتروني والحالة الثابتة المدرجة أعلاه داخل قسم ظاهري، حيث يتم تجاوز "
+"الإعداد العمومي.\n"
+"\n"
+"\n"
+"</p><p><b><big>نوع الفحص</big> = اتصال</b>|<b>خارجي</b>|<b>تفاوض</b>|"
+"<b>إيقاف</b>|<b>تشغيل</b>|<b>أداة اختبار الاتصال</b>|<b>مهلة الفحص</b><i>N"
+"i>\n"
+"</p><p>نوع الفحص لإجرائه. يعمل خيار التفاوض على إرسال طلب والتطابق مع سلسلة "
+"الاستلام. يعمل الخيار \"اتصال\" على محاولة إجراء اتصال <small>TCP/IP"
+"small>، ومن ثم يمكن حذف السلسلتين طلب واستلام. إذا كان نوع الفحص رقمًا، فسيتم "
+"دمج الخيارين تفاوض واتصال، بحيث يتم إجراء محاولة تفاوض واحدة بعد كل محاولة "
+"اتصال N. فمن المفيد التحقق غالبًا من استجابة الخدمة، ويتم فحص التفاوض في "
+"الفواصل الزمنية الأطول. يُقصد بالخيار \"أداة اختبار الاتصال\" أنه سيتم "
+"استخدام أداة اختبار الاتصال\n"
+"<small>ICMP</small> لاختبار توافر الخوادم الفعلية. كما يتم استخدام أداة "
+"اختبار الاتصال لفحص اتصال خدمات <small>UDP</small>. يُقصد بالخيار\n"
+"\"إيقاف\" بأنه لن يُجرى الفحص ولن يتم تنشيط الخوادم الفعلية أو الاحتياطية. "
+"يُقصد بالخيار \"تشغيل\" بأنه سيُجرى الفحص ودائمًا ما سيتم تنشيط\n"
+"الخوادم الفعلية. الإعداد الافتراضي هو <i>تفاوض</i>.\n"
+"\n"
+"\n"
+"</p><p><b><big>service</big> = dns</b>|<b>ftp</b>|<b>http</b>|<b>https</b>|"
+"<b>imap</b>|<b>imaps</b>|<b>ldap</b>|<b>mysql</b>|<b>nntp</b>|<b>none</b>|"
+"<b>oracle</b>|<b>pgsql</b>|<b>pop</b>|<b>pops</b>|<b>radius</b>|"
+"<b>simpletcp</b>|<b>sip</b>|<b>smtp</b>\n"
+"</p><p>نوع الخدمة للمراقبة عند استخدام نوع الفحص=تفاوض. يشير الخيار \"لا\" "
+"إلى خدمة لن يتم مراقبتها.\n"
+"</p><p>يرسل simpletcp سلسلة <b>الطلب</b> إلى الخادم واختبارها مقابل regexp "
+"<b>للاستلام</b>. تتصل الأنواع\n"
+"الأخرى من عمليات الفحص بالخادم الذي يستخدم\n"
+"البروتوكول المحدد. الرجاء مراجعة قسمي <b>طلب</b> و<b>استلام</b> للتعرف على "
+"معلومات خاصة بالبروتوكول.\n"
+"</p><p>الإعداد الافتراضي:\n"
+"</p>
- \n"
+"<dt>* منفذ الخادم الظاهري هو 21: ftp\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 25: smtp\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 53: dns\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 80: http\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 110: pop\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 119: nntp\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 143: imap\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 389: ldap\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 443: https\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 993: imaps\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 995: pop\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 1521: oracle\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 1812: radius\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 3306: mysql\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 5432: pgsql\n"
+"</dt><dt>* منفذ الخادم الظاهري هو 5060: sip\n"
+"</dt><dt>* خلاف ذلك: none\n"
+"\n"
+"\n"
+"</dt><dt><b><big>أمر الفحص</big> = \"</b><i>مسار البرنامج النصي</i><b>\""
+"b>\n"
+"<p>يُستخدم هذا الإعداد إذا كان نوع الفحص خارجي وكان مطلوب تشغيل الأمر للتحقق "
+"من حالة خادم فعلي. ينبغي أن يتم الخروج بالحالة 0 إذا كان كل شيء\n"
+"على ما يرام أو كان أي رقم بخلاف الصفر. \n"
+"</p><p>يتم تمرير 4 معلمات على البرنامج النصي:\n"
+"</p></dt><dt>* علامة ip/الجدار الناري للخادم الظاهري\n"
+"</dt><dt>* منفذ الخادم الظاهري\n"
+"</dt><dt>* ip للخادم الظاهري\n"
+"</dt><dt>* منفذ الخادم الظاهري\n"
+"</dt><dt>الإعداد الافتراضي: /bin/صواب\n"
+"\n"
+"\n"
+"<p><b><big>منفذ الفحص</big> =</b> <i>n</i>\n"
+"</p><p>رقم المنفذ للمراقبة. أحيانًا يختلف منفذ الفحص عن منفذ الخدمة. \n"
+"</p><p>الإعداد الافتراضي: المنفذ المحدد لكل خادم فعلي\n"
+"\n"
+"\n"
+"</p><p><b><big>الطلب</big> = \"</b><i>uri لطلب الكائن</i><b>\"</b>\n"
+"</p><p>سيتطلب هذا الكائن كل ثانية في الفاصل الزمني للفحص في كل خادم فعلي. "
+"يجب وضع السلسلة داخل علامتي اقتباس.\n"
+"لاحظ أنه يمكن تجاوز هذه السلسلة\n"
+"اختياريًا وفقًا لكل خادم فعلي مستند إلى سلسلة الطلب. \n"
+"</p><p>بالنسبة لفحص<small>DNS</small> ، ينبغي أن يكون اسم سجل A أو عنوان سجل "
+"<small>PTR</small> للبحث عنه.\n"
+"</p><p>بالنسبة لفحص MySQL أو Oracle أو PostgeSQL، ينبغي أن يكون استعلام "
+"<small>SQL</small>. لم يتم فحص البيانات المرتجعة، والرد عبارة عن صف واحد أو "
+"أكثر فحسب. هذا هو الإعداد المطلوب.\n"
+"</p><p>بالنسبة لفحصsimpletcp ، يتم إرسال هذه السلسلة حرفية فيما عدا استبدال "
+"أي أحداث بحرف سطر جديد.\n"
+"\n"
+"\n"
+"</p><p><b><big>استلام</big> = \"</b><i>regexp للمقارنة</i><b>\"</b>\n"
+"</p><p>إذا كانت النتيجة المطلوبة تتضمن <i>regexp هذا للمقارنة</i>، يتم "
+"الإعلان عن استمرار اتصال الخادم الفعلي. يجب وضع regexp داخل علامتي اقتباس. "
+"تذكر أن\n"
+"regexps لا تعتبر سلاسل عادية مما تتطلب منك تفادي الأحرف الخاصة إذا كان ينبغي "
+"استخدامها كبيانات حرفية. لاحظ أنه يمكن تجاوز regexp هذا\n"
+"اختياريًا وفقًا لكل خادم فعلي مستند إلى regexp للاستلام.\n"
+"</p><p>بالنسبة لفحص<small>DNS</small> ، ينبغي أن يكون ذلك أي من عناوين سجل A "
+"أو أي من أسماء سجل <small>PTR</small> .\n"
+"</p><p>بالنسبة لفحصMySQL ، لن يُستخدم إعداد الاستلام.\n"
+"\n"
+"\n"
+"</p><p><b><big> أسلوبhttp</big> = <small>GET</small></b> | <b><small>HEAD"
+"small></b>\n"
+"</p><p>تعيين أسلوب <small>HTTP</small> الذي ينبغي استخدامه لإحضار عنوان "
+"<small>URI</small> المحدد في سلسلة الطلب. يعد <small>GET</small> الأسلوب "
+"المستخدم افتراضيًا إذا لم يتم تعيين المعلمة. إذا تم استخدام "
+"الأسلوب<small>HEAD</small> ، فينبغي ألا يتم تعيين سلسلة الاستلام.\n"
+"</p><p>الإعداد الافتراضي: <small>GET</small>\n"
+"\n"
+"\n"
+"</p><p><b><big>المضيف الظاهري</big> = \"</b><i>اسم المضيف</i><b>\"</b>\n"
+"</p><p>يُستخدم عند استخدام فحص تفاوض مع أسلوب <small>HTTP</small> أو "
+"<small>HTTPS</small>. تعيين عنوان المضيف المستخدم في طلب <small>HTTP"
+"small>. في حالة الأسلوب <small>HTTPS</small>، عامةً ما يحتاج إلى مطابقة الاسم "
+"الشائع لشهادة <small>SSL</small>. إذا لم يتم تعيين عنوان المضيف، فسيتم "
+"اشتقاقه\n"
+"من عنوان url الخاص بالطلب للخادم الفعلي إذا كان موجودًا. وكحل أخير، سيُستخدم "
+"عنوان <small>IP</small> للخادم الفعلي. \n"
+"\n"
+"\n"
+"</p><p><b><big>تسجيل الدخول</big> = \"</b><i>اسم المستخدم</i><b>\"</b>\n"
+"</p><p>بالنسبة للأساليب <small>FTP</small> و<small>IMAP</small> "
+"و<small>LDAP</small> وMySQL وOracle و<small>POP</small> وPostgreSQL، سيُستخدم "
+"اسم المستخدم لتسجيل الدخول.\n"
+"</p><p>بالنسبة لأسلوب Radius، تُستخدم كلمة السر للسمة \"اسم المستخدم\".\n"
+"</p><p>بالنسبة للأسلوب<small>SIP</small> ، يُستخدم اسم المستخدم كعنوان المرسل "
+"والمستلم لاستعلام <small>OPTIONS</small> .\n"
+"</p><p>الإعداد الافتراضي:\n"
+"</p></dt><dt>* <small>FTP:</small>مجهول\n"
+"</dt><dt>* MySQL Oracle وPostgreSQL: يجب تحديدها في التكوين\n"
+"</dt><dt>* <small>SIP:</small> ldirectord@<hostname>، يُشتق اسم المضيف "
+"وفقًا لخيار كلمة السر أدناه.\n"
+"</dt><dt>* خلاف ذلك: سلسلة فارعة تشير إلى أنه لن تتم محاولة مصادقة الحالة.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>كلمة السر</big> = \"</b><i>كلمة السر</i><b>\"</b>\n"
+"<p>كلمة السر المطلوب استخدامها\n"
+"لتسجيل الدخول إلى الخوادم <small>FTP</small> و<small>IMAP</small> "
+"و<small>LDAP</small> وMySQL وOracle و<small>POP</small> وPostgreSQL و\n"
+"<small>SIP</small>.\n"
+"</p><p>بالنسبة لخادم Radius، تُستخدم كلمة السر للسمة \"المستخدم وكلمة السر"
+"\".\n"
+"</p><p>الإعداد الافتراضي:\n"
+"</p></dt><dt>* <small>FTP:</small> ldirectord@<hostname>، حيث يعد اسم "
+"المضيف متغير البيئة <small>HOSTNAME</small> الذي يتم تقييمه في وقت التشغيل "
+"أو اشتقاقه من uname إذا لم يتم تعيينه.\n"
+"</dt><dt>* خلاف ذلك: سلسلة فارغة. في حال وجود الخوادم <small>LDAP</small> "
+"وMySQL وOracle وPostgreSQL، فإنه لن يتم إجراء المصادقة.\n"
+"\n"
+"\n"
+"</dt><dt><b><big>اسم قاعدة البيانات</big> = \"</b><i>اسم قاعدة البيانات"
+"i><b>\"</b>\n"
+"<p>قاعدة البيانات المطلوب استخدامها للخوادم MySQL وOracle وPostgreSQL، هي "
+"التي سيُجرى الاستعلام (التعيين حسب<b>الاستلام</b> أعلاه) وفقًا لها. هذا هو "
+"الإعداد المطلوب..\n"
+"\n"
+"\n"
+"</p><p><b><big>سر خادم radius </big> = \"</b><i>سر خادم radius </i><b>\""
+"b>\n"
+"</p><p>السر المطلوب استخدامه لخوادم Radius هو الذي يُستخدم لإجراء طلب-وصول "
+"باستخدام اسم المستخدم (التعيين حسب <b>تسجيل الدخول</b> أعلاه) وكلمة السر "
+"(التعيين حسب\n"
+"<b>كلمة السر</b> أعلاه).\n"
+"</p><p>الإعداد الافتراضي: سلسلة فارغة\n"
+"\n"
+"\n"
+"</p><p><b><big>مستمر</big> =</b> <i>n</i>\n"
+"</p><p>عدد الثواني لاتصالات العميل المستمرة.\n"
+"\n"
+"\n"
+"</p><p><b><big>قناع الشبكة</big> =</b> <i>w.x.y.z</i>\n"
+"</p><p>قناع الشبكة المطلوب استخدامه للتنفيذ المتكرر لاتصالات العميل "
+"المستمرة.\n"
+"\n"
+"\n"
+"</p><p><b><big>المجدول</big> =</b> <i>scheduler_name</i>\n"
+"</p><p>المجدول المطلوب استخدامه بواسطة <small>LVS</small> لموازنة التحميل. "
+"للحصول على أي معلومة حول المجدولات المتوفرة، الرجاء مراجعة الصفحة اليدوية "
+"<b>ipvsadm</a></b>(8).\n"
+"</p><p>الإعداد الافتراضي: \"wrr\"\n"
+"\n"
+"\n"
+"</p><p><b><big>البروتوكول</big> = tcp</b>|<b>udp</b>|<b>fwm</b>\n"
+"</p><p>البروتوكول المطلوب استخدامه. إذا تم تحديد الخادم الظاهري كمنفذ وعنوان "
+"<small>IP</small>، فيجب أن يكون البروتوكول إما tcp أوudp. إذا تم وضع علامة "
+"كجدار ناري، فيجب أن يكون\n"
+"البروتوكول fwm.\n"
+"</p><p>الإعداد الافتراضي:\n"
+"</p></dt><dt>* إذا كان الخادم الظاهري هو منفذ وعنوان <small>IP</small> ولم "
+"يكن المنفذ 53: tcp\n"
+"</dt><dt>* الخادم الظاهري هو منفذ وعنوان <small>IP</small> والمنفذ هو 53: "
+"udp\n"
+"</dt><dt>* الخادم الظاهري هو علامة جدار ناري: fwm\n"
+"</dt></dl>\n"
+"\n"
+"\n"
+"</p><p><b><big>مهلة الفحص</big> =</b> <i>n</i>\n"
+"</p><p>المهلة بالثواني لعمليات فحص أداة اختبار الاتصال والفحص الخارجي وفحص "
+"الاتصال. إذا تم تجاوز المهلة، فسيتم الإعلان عن الخادم الفعلي بأنه خامد.\n"
+"</p><p>إذا تم تحديدها في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"</p><p>إذا لم يتم تحديدها، فستُستخدم مهلة التفاوض. تعد مهلة التفاوض أيضًا قيمة "
+"عمومية يمكن تجاوزها بواسطة كل إعداد ظاهري.\n"
+"</p><p>إذا لم يتم تعيين كل من مهلة الفحص ومهلة التفاوض، فسيُستخدم الإعداد "
+"الافتراضي.\n"
+"</p><p>الإعداد الافتراضي: 5 ثوانٍ\n"
+"\n"
+"</p><p><b><big>مهلة التفاوض</big> =</b> <i>n</i>\n"
+"</p><p>المهلة بالثواني لعمليات فحص التفاوض.\n"
+"</p><p>إذا تم تحديدها في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"</p><p>إذا لم يتم تحديدها، فستُستخدم قيمة مهلة الاتصال. تعد مهلة الاتصال أيضًا "
+"قيمة عمومية يمكن تجاوزها بواسطة كل إعداد ظاهري.\n"
+"</p><p>إذا لم يتم تعيين كل من مهلة التفاوض ومهلة الاتصال، فسيُستخدم الإعداد "
+"الافتراضي.\n"
+"</p><p>الإعداد الافتراضي: 30 ثانية\n"
+"\n"
+"</p><p><b><big>عدد مرات الفشل</big> =</b> <i>n</i>\n"
+"</p><p>سيتم الإبلاغ عن عدد المرات المتتالية للفشل عن طريق إجراء عملية فحص "
+"قبل اعتبار الاتصال بالخادم الفعلي فاشل. ستشير القيمة 1 إلى اعتبار الاتصال "
+"بالخادم الفعلي فاشل من محاولة الفشل الأولى. سيعمل الفحص الناجح على إعادة "
+"تعيين عدّاد مرات الفشل إلى 0.\n"
+"</p><p>إذا تم تحديده في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"</p><p>الإعداد الافتراضي: 1\n"
+"\n"
+"</p><p><b><big>تنبيه البريد الإلكتروني</big> = \"</b><i>عنوان البريد "
+"الإلكتروني</i><b>\"</b>\n"
+"</p><p>هو عنوان بريد إلكتروني صالح لإرسال تنبيهات حول حالة الاتصال التي تم "
+"تغييرها إلى أي خادم فعلي محدد في الخدمة الظاهرية. يتطلب هذا الخيار تثبيت "
+"MailTools لكلl\n"
+"وحدة النمطية. محاولة إرسال البريد الإلكتروني تلقائيًا باستخدام أي من الأساليب "
+"المضمنة. راجع perldoc Mail::Mailer لمزيد من المعلومات حول الأساليب.\n"
+"</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"\n"
+"</p><p><b><big>تكرار تنبيهات البريد الإلكتروني</big> =</b> <i>n</i>\n"
+"</p><p>هو التأخير بالثواني بين تنبيهات البريد الإلكتروني المتكررة إذا ما زال "
+"الخادم الفعلي المحدد في الخدمة الظاهرية لا يمكن الوصول إليه. سيعمل إعداد "
+"الثواني الصفرية على منع التنبيهات المتكررة. تعتمد دقة توقيت البريد "
+"الإلكتروني لهذا الإعداد على عدد الثواني المحددة في خيار\n"
+"تكوين الفاصل الزمني للفحص.\n"
+"</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"</p><p>الإعداد الافتراضي: 0\n"
+"\n"
+"</p><p><b><big>حالة تنبيه البريد الإلكتروني</big> = الكل</b>|<b>بلا</b>|"
+"<b>بدء</b>|<b>تشغيل</b>|<b>إيقاف</b>|<b>إعادة تحميل</b>,...\n"
+"</p><p>قائمة حالات الخادم المفصولة بفواصل حيث ينبغي إرسال تنبيهات البريد "
+"الإلكتروني. حالة <b>الكل</b> هي موجز لتنفيذ الحالات \n"
+"\"<b>بدء</b>،<b>تشغيل</b>،<b>إيقاف</b>،<b>إعادة تحميل</b>\". إذا تم تحديد "
+"الحالة <b>بلا</b>، فلن يتم تحديد أي خيار آخر، أو بخلاف ذلك، ستكون الخيارات "
+"ored\n"
+"مع بعضها البعض.\n"
+"</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"</p><p>الإعداد الافتراضي: الكل\n"
+"\n"
+"</p><p><b><big>احتياطي</big> =</b> <i>ip_address|hostname[:portnumber|"
+"sercvicename]</i> [<b>gate</b>|<b>masq</b>|<b>ipip</b>]\n"
+"</p><p>الخادم الذي تتم إعادة توجيه خدمة ويب إليه إذا تعطلت الخوادم الفعلية. "
+"عادةً ما سيكون ذلك 127.0.0.1 مع صفحة طارئة.\n"
+"</p><p>إذا تم تحديد ذلك في قسم الخادم الظاهري، فسيتم تجاوز القيمة العمومية.\n"
+"\n"
+"</p><p><b><big>اختبار الحالة الثابتة</big> = نعم</b>|<b>لا</b>\n"
+"</p><p>إذا تم تحديد <i>نعم</i>، فإنه عند تحديد أن الخوادم الفعلية أو الإرجاع "
+"متعطلة، لا تتم إزالتها من جدول <small>LVS</small> في kernel.\n"
+"وبخلاف ذلك، سيتم تعيين وزنها إلى صفر مما يعني أنه لن يتم قبول أي اتصالات "
+"جديدة.\n"
+"</p><p>فهذا يتضمن الأثر الجانبي، حيث إنه إذا كان الخادم الفعلي يتضمن اتصالات "
+"مستمرة، فستتم متابعة إعادة توجيه الاتصالات الجديدة من أي أجهزة عميلة موجودة "
+"إلى\n"
+"الخادم الفعلي، إلى أن تنتهي مهلة الاستمرار. راجع ipvsadm لمزيد من المعلومات "
+"حول الاتصالات المستمرة.\n"
+"</p><p>يمكن تفادي هذا الأثر الجانبي عن طريق تشغيل ما يلي:\n"
+"</p><p>echo 1 > /proc/sys/net/ipv4/vs/expire_quiescent_template\n"
+"</p><p>إذا لم يكن الملف proc موجودًا، فقد يشير ذلك إلى أن kernel لا يتمتع "
+"بدعم lvs؛ حيث إنه لم يتم تحميل دعم <small>LVS</small> أو أن إصدار kernel "
+"قديم للغاية ليتضمن ملف proc. ينبغي أن يعمل تشغيل ipvsadm كجذر على تحميل "
+"<small>LVS</small> في kernel إن أمكن.\n"
+"</p><p>إذا تم تحديد <i>لا</i>، فستتم إزالة الخوادم الفعلية أو الإرجاع من "
+"جدول <small>LVS</small> في kernel. الإعداد الافتراضي هو <i>نعم</i>.\n"
+"</p><p>في حالة التحديد في قسم خادم ظاهري، يتم تجاوز القيمة العامة.\n"
+"</p><p>الإعداد الافتراضي: <i>نعم</i>\n"
+"\n"
+"\n"
+"\n"
+
#. overwrite global value part
#: src/include/iplb/vserver_conf.rb:146
-msgid "Check Type"
-msgstr "نوع الفحص"
-
+msgid "Check Type"
+msgstr "نوع الفحص"
+
#: src/include/iplb/vserver_conf.rb:150
-msgid "Check Port"
-msgstr "منفذ الفحص"
-
+msgid "Check Port"
+msgstr "منفذ الفحص"
+
#: src/include/iplb/vserver_conf.rb:151
-msgid "Service"
-msgstr "الخدمة"
-
+msgid "Service"
+msgstr "الخدمة"
+
#: src/include/iplb/vserver_conf.rb:152
-msgid "Check Command"
-msgstr "أمر الفحص"
-
+msgid "Check Command"
+msgstr "أمر الفحص"
+
#: src/include/iplb/vserver_conf.rb:157
-msgid "Http Method"
-msgstr "أسلوب Http"
-
+msgid "Http Method"
+msgstr "أسلوب Http"
+
#: src/include/iplb/vserver_conf.rb:160
-msgid "Request"
-msgstr "طلب"
-
+msgid "Request"
+msgstr "طلب"
+
#: src/include/iplb/vserver_conf.rb:162
-msgid "Receive"
-msgstr "استقبال"
-
+msgid "Receive"
+msgstr "استقبال"
+
#: src/include/iplb/vserver_conf.rb:165
-msgid "Virtual Host"
-msgstr "المضيف الظاهري"
-
+msgid "Virtual Host"
+msgstr "المضيف الظاهري"
+
#: src/include/iplb/vserver_conf.rb:177
-msgid "Login"
-msgstr "تسجيل دخول"
-
+msgid "Login"
+msgstr "تسجيل دخول"
+
#: src/include/iplb/vserver_conf.rb:178
-msgid "Password"
-msgstr "كلمة السر"
-
+msgid "Password"
+msgstr "كلمة السر"
+
#: src/include/iplb/vserver_conf.rb:180
-msgid "Database Name"
-msgstr "اسم قاعدة البيانات"
-
+msgid "Database Name"
+msgstr "اسم قاعدة البيانات"
+
#: src/include/iplb/vserver_conf.rb:181
-msgid "Radius Secret"
-msgstr "سر Radius"
-
+msgid "Radius Secret"
+msgstr "سر Radius"
+
#: src/include/iplb/vserver_conf.rb:199
-msgid "Persistent"
-msgstr "دائم"
-
+msgid "Persistent"
+msgstr "دائم"
+
#: src/include/iplb/vserver_conf.rb:200
-msgid "Netmask"
-msgstr "قناع الشبكة"
-
+msgid "Netmask"
+msgstr "قناع الشبكة"
+
#: src/include/iplb/vserver_conf.rb:202
-msgid "Scheduler"
-msgstr "المجدول"
-
+msgid "Scheduler"
+msgstr "المجدول"
+
#: src/include/iplb/vserver_conf.rb:211
-msgid "Protocol"
-msgstr "بروتوكول"
-
+msgid "Protocol"
+msgstr "بروتوكول"
+
#: src/include/iplb/vserver_conf.rb:231
-msgid "Virtual Servers"
-msgstr "الخوادم الظاهرية"
-
+msgid "Virtual Servers"
+msgstr "الخوادم الظاهرية"
+
#: src/include/iplb/vserver_conf.rb:234 src/include/iplb/vserver_conf.rb:301
-msgid "Add"
-msgstr "إضافة"
-
+msgid "Add"
+msgstr "إضافة"
+
#: src/include/iplb/vserver_conf.rb:235 src/include/iplb/vserver_conf.rb:303
-msgid "Edit"
-msgstr "تحرير"
-
+msgid "Edit"
+msgstr "تحرير"
+
#: src/include/iplb/vserver_conf.rb:236 src/include/iplb/vserver_conf.rb:302
-msgid "Delete"
-msgstr "حذف"
-
+msgid "Delete"
+msgstr "حذف"
+
#. disable the delete & edit button if vserver box is empty
#: src/include/iplb/vserver_conf.rb:296
-msgid "Virtual Server"
-msgstr "الخادم الظاهري"
-
+msgid "Virtual Server"
+msgstr "الخادم الظاهري"
+
#: src/include/iplb/vserver_conf.rb:298
-msgid "Real Servers"
-msgstr "الخوادم الفعلية"
-
+msgid "Real Servers"
+msgstr "الخوادم الفعلية"
+
#: src/include/iplb/vserver_conf.rb:310
-msgid "Check type"
-msgstr "نوع الفحص"
-
+msgid "Check type"
+msgstr "نوع الفحص"
+
#: src/include/iplb/vserver_conf.rb:311
-msgid "Auth type"
-msgstr "نوع المصادقة"
-
+msgid "Auth type"
+msgstr "نوع المصادقة"
+
#: src/include/iplb/vserver_conf.rb:312
-msgid "Others"
-msgstr "أخرى"
-
+msgid "Others"
+msgstr "أخرى"
+
#. return `cacel or a string
#: src/include/iplb/vserver_conf.rb:342 src/include/iplb/vserver_conf.rb:427
-msgid "OK"
-msgstr "موافق"
-
+msgid "OK"
+msgstr "موافق"
+
#: src/include/iplb/vserver_conf.rb:343 src/include/iplb/vserver_conf.rb:428
-msgid "Cancel"
-msgstr "إلغاء"
-
+msgid "Cancel"
+msgstr "إلغاء"
+
#. split the real server ip value;
#: src/include/iplb/vserver_conf.rb:411
-msgid "If using IPv6,the format should like this\n[fe80::5054:ff:fe00:2]"
-msgstr "عند استخدام IPv6، ينبغي أن يكون التنسيق مثل ذلك\n[fe80::5054:ff:fe00:2]"
-
+msgid ""
+"If using IPv6,the format should like this\n"
+"[fe80::5054:ff:fe00:2]"
+msgstr ""
+"عند استخدام IPv6، ينبغي أن يكون التنسيق مثل ذلك\n"
+"[fe80::5054:ff:fe00:2]"
+
#: src/include/iplb/vserver_conf.rb:413
-msgid "Real Server's IP Address"
-msgstr "عنوان IP للخادم الفعلي"
-
+msgid "Real Server's IP Address"
+msgstr "عنوان IP للخادم الفعلي"
+
#: src/include/iplb/vserver_conf.rb:419
-msgid "Forward Method"
-msgstr "أسلوب أعادة التوجيه"
-
+msgid "Forward Method"
+msgstr "أسلوب أعادة التوجيه"
+
#: src/include/iplb/vserver_conf.rb:422
-msgid "weight"
-msgstr "الوزن"
-
+msgid "weight"
+msgstr "الوزن"
+
#. find next ]
#: src/include/iplb/vserver_conf.rb:456
-msgid "IP address is not Valid"
-msgstr "عنوان IP غير صالح"
-
+msgid "IP address is not Valid"
+msgstr "عنوان IP غير صالح"
+
#. tab switch events end
#: src/include/iplb/vserver_conf.rb:547
-msgid "Add a new real server:"
-msgstr "إضافة خادم فعلي جديد:"
-
+msgid "Add a new real server:"
+msgstr "إضافة خادم فعلي جديد:"
+
#: src/include/iplb/vserver_conf.rb:564
-msgid "Edit the real server:"
-msgstr "تحرير الخادم الفعلي:"
-
+msgid "Edit the real server:"
+msgstr "تحرير الخادم الفعلي:"
+
#. Initialization dialog contents
#: src/include/iplb/wizards.rb:142
-msgid "Initializing..."
-msgstr "تتم الآن التهيئة..."
-
+msgid "Initializing..."
+msgstr "تتم الآن التهيئة..."
+
#. Read all iplb settings
#. @return true on success
#: src/modules/Iplb.rb:214
-msgid "Initializing IPLB Configuration"
-msgstr "تهيئة تكوين IPLB"
-
+msgid "Initializing IPLB Configuration"
+msgstr "تهيئة تكوين IPLB"
+
#. Names of real stages
#: src/modules/Iplb.rb:221
-msgid "Read the global settings"
-msgstr "قراءة الإعدادات العمومية"
-
+msgid "Read the global settings"
+msgstr "قراءة الإعدادات العمومية"
+
#: src/modules/Iplb.rb:221
-msgid "Read the virtual host settings"
-msgstr "قراءة إعدادات المضيف الظاهري"
-
+msgid "Read the virtual host settings"
+msgstr "قراءة إعدادات المضيف الظاهري"
+
#: src/modules/Iplb.rb:223
-msgid "Reading the global settings..."
-msgstr "تتم الآن قراءة الإعدادات العمومية..."
-
+msgid "Reading the global settings..."
+msgstr "تتم الآن قراءة الإعدادات العمومية..."
+
#: src/modules/Iplb.rb:224
-msgid "Reading the virtual host settings..."
-msgstr "تتم الآن قراءة إعدادات المضيف الظاهري..."
-
+msgid "Reading the virtual host settings..."
+msgstr "تتم الآن قراءة إعدادات المضيف الظاهري..."
+
#: src/modules/Iplb.rb:225 src/modules/Iplb.rb:330
-msgid "Finished"
-msgstr "انتهى"
-
+msgid "Finished"
+msgstr "انتهى"
+
#. Write all iplb settings
#. @return true on success
#: src/modules/Iplb.rb:320
-msgid "Saving IPLB Configuration"
-msgstr "حفظ تكوين IPLB"
-
+msgid "Saving IPLB Configuration"
+msgstr "حفظ تكوين IPLB"
+
#: src/modules/Iplb.rb:326
-msgid "Write the settings"
-msgstr "اكتب الاعدادات"
-
+msgid "Write the settings"
+msgstr "اكتب الاعدادات"
+
#: src/modules/Iplb.rb:326
-msgid "Run SuSEconfig"
-msgstr "تشغيل اعداد سوزي"
-
+msgid "Run SuSEconfig"
+msgstr "تشغيل اعداد سوزي"
+
#: src/modules/Iplb.rb:328
-msgid "Writing the settings..."
-msgstr "..كتابة الاعدادات"
-
+msgid "Writing the settings..."
+msgstr "..كتابة الاعدادات"
+
#: src/modules/Iplb.rb:329
-msgid "Running SuSEconfig..."
-msgstr "يتم الآن تشغيل SuSEconfig..."
-
+msgid "Running SuSEconfig..."
+msgstr "يتم الآن تشغيل SuSEconfig..."
+
#. write global conf
#. check for ipv6 address to decide whether to add "6=" or "="
#. string key's format
@@ -377,12 +1342,11 @@
#. only extract the 2001:db8::5 part from the key string
#. to check whether it is an ipv6 address;
#: src/modules/Iplb.rb:355 src/modules/Iplb.rb:392 src/modules/Iplb.rb:405
-msgid "Cannot write settings."
-msgstr "تعذرت كتابة الإعدادات."
-
+msgid "Cannot write settings."
+msgstr "تعذرت كتابة الإعدادات."
+
#. TODO FIXME: your code here...
#. Configuration summary text for autoyast
#: src/modules/Iplb.rb:441
-msgid "Configuration summary..."
-msgstr "ملخص التكوين..."
-
+msgid "Configuration summary..."
+msgstr "ملخص التكوين..."
Modified: branches/SLE12-SP3/yast/ar/po/iscsi-client.ar.po
===================================================================
--- branches/SLE12-SP3/yast/ar/po/iscsi-client.ar.po 2017-04-19 08:50:37 UTC (rev 97296)
+++ branches/SLE12-SP3/yast/ar/po/iscsi-client.ar.po 2017-04-19 08:53:17 UTC (rev 97297)
@@ -1,239 +1,240 @@
# Copyright (C) 2006 SuSE Linux Products GmbH, Nuernberg
# This file is distributed under the same license as the package.
-#
-msgid ""
-msgstr ""
-"Project-Id-Version: iscsi-client\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2017-03-01 02:28+0000\n"
-"PO-Revision-Date: 2017-04-18 14:10\n"
-"Last-Translator: Novell language
participants (1)
-
kezz90@svn2.opensuse.org