Author: minton Date: 2015-08-30 20:09:07 +0200 (Sun, 30 Aug 2015) New Revision: 92398 Modified: trunk/yast/ru/po/cluster.ru.po Log: Merged cluster.pot for ru Modified: trunk/yast/ru/po/cluster.ru.po =================================================================== --- trunk/yast/ru/po/cluster.ru.po 2015-08-30 18:09:05 UTC (rev 92397) +++ trunk/yast/ru/po/cluster.ru.po 2015-08-30 18:09:07 UTC (rev 92398) @@ -5,7 +5,7 @@ msgstr "" "Project-Id-Version: YaST (@memory@)\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2014-10-29 16:20+0100\n" +"POT-Creation-Date: 2015-08-25 18:36+0200\n" "PO-Revision-Date: 2014-11-17 00:46+0400\n" "Last-Translator: Alexander Melentev <minton@opensuse.org>\n" "Language-Team: Russian <opensuse-translation-ru@opensuse.org>\n" @@ -77,123 +77,125 @@ msgstr "Настройка conntrackd" #. return `cancel or a string -#: src/include/cluster/dialogs.rb:85 src/include/cluster/dialogs.rb:120 +#: src/include/cluster/dialogs.rb:87 src/include/cluster/dialogs.rb:122 msgid "OK" msgstr "OK" -#: src/include/cluster/dialogs.rb:86 src/include/cluster/dialogs.rb:121 +#: src/include/cluster/dialogs.rb:88 src/include/cluster/dialogs.rb:123 msgid "Cancel" msgstr "Отмена" #. BNC#871970, change member address struct -#: src/include/cluster/dialogs.rb:111 +#: src/include/cluster/dialogs.rb:113 msgid "IP Address" msgstr "IP-адрес" -#: src/include/cluster/dialogs.rb:113 +#: src/include/cluster/dialogs.rb:115 msgid "Redundant IP Address" msgstr "Дополнительный IP-адрес" -#: src/include/cluster/dialogs.rb:115 src/include/cluster/dialogs.rb:499 +#: src/include/cluster/dialogs.rb:117 src/include/cluster/dialogs.rb:501 msgid "Node ID" msgstr "ID узла" #. Set need to require 'set' -#: src/include/cluster/dialogs.rb:163 +#: src/include/cluster/dialogs.rb:165 msgid "Node ID has to be fulfilled with a positive integer" msgstr "Необходимо указать положительное целое число в качестве ID узла" -#: src/include/cluster/dialogs.rb:170 +#: src/include/cluster/dialogs.rb:172 msgid "Node ID must be unique" msgstr "ID узла должен быть уникальным" #. BNC#871970, change member address struct -#: src/include/cluster/dialogs.rb:191 src/include/cluster/dialogs.rb:245 +#: src/include/cluster/dialogs.rb:193 src/include/cluster/dialogs.rb:247 msgid "The Bind Network Address has to be fulfilled" msgstr "Необходимо указать адрес объединяемой сети" -#: src/include/cluster/dialogs.rb:197 +#: src/include/cluster/dialogs.rb:199 msgid "The cluster name has to be fulfilled" msgstr "Необходимо указать имя кластера" -#: src/include/cluster/dialogs.rb:214 +#: src/include/cluster/dialogs.rb:216 msgid "The Member Address has to be fulfilled" msgstr "Необходимо указать адрес члена" #. BNC#880242, expected_votes must have value when "udp" -#: src/include/cluster/dialogs.rb:220 -msgid "The Expected Votes has to be fulfilled when udp is configured" +#: src/include/cluster/dialogs.rb:222 +#, fuzzy +#| msgid "The Expected Votes has to be fulfilled when udp is configured" +msgid "The Expected Votes has to be fulfilled when multicast transport is configured" msgstr "При настройке UDP необходимо указать ожидаемые голоса" -#: src/include/cluster/dialogs.rb:226 src/include/cluster/dialogs.rb:254 -#: src/include/cluster/dialogs.rb:1463 +#: src/include/cluster/dialogs.rb:228 src/include/cluster/dialogs.rb:256 +#: src/include/cluster/dialogs.rb:1427 msgid "The Multicast Address has to be fulfilled" msgstr "Необходимо указать адрес группового вещания" -#: src/include/cluster/dialogs.rb:236 src/include/cluster/dialogs.rb:264 +#: src/include/cluster/dialogs.rb:238 src/include/cluster/dialogs.rb:266 msgid "The Multicast port must be a positive integer" msgstr "Порт группового вещания должен быть положительным целым числом" -#: src/include/cluster/dialogs.rb:270 +#: src/include/cluster/dialogs.rb:272 msgid "Only passive or active can be chosen if multiple interface used. Set to passive." msgstr "При использовании нескольких интерфейсов можно выбрать только пассивный или активный режимы. Задан пассивный." #. BNC#871970, change member address struct to memberaddr -#: src/include/cluster/dialogs.rb:439 +#: src/include/cluster/dialogs.rb:441 msgid "Transport:" msgstr "Транспорт:" -#: src/include/cluster/dialogs.rb:447 +#: src/include/cluster/dialogs.rb:449 msgid "Channel" msgstr "Канал" -#: src/include/cluster/dialogs.rb:452 src/include/cluster/dialogs.rb:473 +#: src/include/cluster/dialogs.rb:454 src/include/cluster/dialogs.rb:475 msgid "Bind Network Address:" msgstr "Присвоить адрес сети:" -#: src/include/cluster/dialogs.rb:458 src/include/cluster/dialogs.rb:476 -#: src/include/cluster/dialogs.rb:1399 +#: src/include/cluster/dialogs.rb:460 src/include/cluster/dialogs.rb:478 +#: src/include/cluster/dialogs.rb:1363 msgid "Multicast Address:" msgstr "Адрес группового вещания:" -#: src/include/cluster/dialogs.rb:460 src/include/cluster/dialogs.rb:477 +#: src/include/cluster/dialogs.rb:462 src/include/cluster/dialogs.rb:479 msgid "Multicast Port:" msgstr "Порт группового вещания:" -#: src/include/cluster/dialogs.rb:467 +#: src/include/cluster/dialogs.rb:469 msgid "Redundant Channel" msgstr "Избыточный канал" -#: src/include/cluster/dialogs.rb:483 +#: src/include/cluster/dialogs.rb:485 msgid "Cluster Name:" msgstr "Имя кластера:" -#: src/include/cluster/dialogs.rb:484 +#: src/include/cluster/dialogs.rb:486 msgid "Expected Votes:" msgstr "Ожидаемые голоса:" -#: src/include/cluster/dialogs.rb:488 +#: src/include/cluster/dialogs.rb:490 msgid "rrp mode:" msgstr "режим rrp:" -#: src/include/cluster/dialogs.rb:493 +#: src/include/cluster/dialogs.rb:495 msgid "Auto Generate Node ID" msgstr "Автоматически создавать ID узла" -#: src/include/cluster/dialogs.rb:498 +#: src/include/cluster/dialogs.rb:500 msgid "Member Address:" msgstr "Адрес члена:" -#: src/include/cluster/dialogs.rb:499 +#: src/include/cluster/dialogs.rb:501 msgid "IP" msgstr "IP" -#: src/include/cluster/dialogs.rb:499 +#: src/include/cluster/dialogs.rb:501 msgid "Redundant IP" msgstr "Дополнительный IP" #. BNC#879596, check the corosync.conf format -#: src/include/cluster/dialogs.rb:539 +#: src/include/cluster/dialogs.rb:541 msgid "" " NOTICE: Detected old corosync configuration.\n" " Please reconfigure the member list and confirm all other settings." @@ -202,137 +204,125 @@ " Повторно настройте список членов и подтвердите все остальные настройки." #. Notice, current could be "nil" if the list is empty. -#: src/include/cluster/dialogs.rb:690 -msgid "Number of threads must be integer" -msgstr "Число потоков должно быть целым числом" - -#: src/include/cluster/dialogs.rb:696 -msgid "Number of threads must larger then 0" -msgstr "Число потоков должно быть больше 0" - -#: src/include/cluster/dialogs.rb:734 +#: src/include/cluster/dialogs.rb:715 msgid "Enable Security Auth" msgstr "Включить безопасную аутентификацию" -#: src/include/cluster/dialogs.rb:737 -msgid "Threads:" -msgstr "Потоки:" - -#: src/include/cluster/dialogs.rb:740 +#: src/include/cluster/dialogs.rb:719 msgid "For a newly created cluster, push the button below to generate /etc/corosync/authkey." msgstr "Если вы создаёте новый кластер, нажмите кнопку ниже для создания /etc/corosync/authkey." -#: src/include/cluster/dialogs.rb:745 +#: src/include/cluster/dialogs.rb:724 msgid "To join an existing cluster, please copy /etc/corosync/authkey from other nodes manually." msgstr "Для подключения к существующему кластеру скопируйте /etc/corosync/authkey с других узлов вручную." -#: src/include/cluster/dialogs.rb:773 +#: src/include/cluster/dialogs.rb:750 msgid "Failed to create /etc/corosync/authkey" msgstr "Сбой при создании /etc/corosync/authkey" -#: src/include/cluster/dialogs.rb:775 +#: src/include/cluster/dialogs.rb:752 msgid "Create /etc/corosync/authkey succeeded" msgstr "/etc/corosync/authkey создан успешно" -#: src/include/cluster/dialogs.rb:850 src/include/cluster/dialogs.rb:920 +#: src/include/cluster/dialogs.rb:813 src/include/cluster/dialogs.rb:883 msgid "Running" msgstr "Выполняется" -#: src/include/cluster/dialogs.rb:852 +#: src/include/cluster/dialogs.rb:815 msgid "Not running" msgstr "Не выполняется" #. servie:cluster is the name of /etc/sysconfig/SuSEfirewall2.d/services/cluster -#: src/include/cluster/dialogs.rb:888 +#: src/include/cluster/dialogs.rb:851 msgid "Booting" msgstr "Загрузка" -#: src/include/cluster/dialogs.rb:898 +#: src/include/cluster/dialogs.rb:861 msgid "On -- Start pacemaker during boot" msgstr "Вкл — Запускать pacemaker во время загрузки системы" -#: src/include/cluster/dialogs.rb:905 +#: src/include/cluster/dialogs.rb:868 msgid "Off -- Start pacemaker manually" msgstr "Выкл — Запускать pacemaker вручную" -#: src/include/cluster/dialogs.rb:914 +#: src/include/cluster/dialogs.rb:877 msgid "Switch On and Off" msgstr "Переключение Вкл. и Выкл." -#: src/include/cluster/dialogs.rb:919 +#: src/include/cluster/dialogs.rb:882 msgid "Current Status: " msgstr "Текущее состояние: " -#: src/include/cluster/dialogs.rb:928 +#: src/include/cluster/dialogs.rb:891 msgid "Start pacemaker Now" msgstr "Запустить pacemaker" -#: src/include/cluster/dialogs.rb:929 +#: src/include/cluster/dialogs.rb:892 msgid "Stop pacemaker Now" msgstr "Остановить pacemaker" #. BNC#874563,stop pacemaker could stop corosync since BNC#872651 is fixed -#: src/include/cluster/dialogs.rb:1027 +#: src/include/cluster/dialogs.rb:990 msgid "Sync Host" msgstr "Узел синхронизации" -#: src/include/cluster/dialogs.rb:1031 src/include/cluster/dialogs.rb:1043 +#: src/include/cluster/dialogs.rb:994 src/include/cluster/dialogs.rb:1006 msgid "Add" msgstr "Добавить" -#: src/include/cluster/dialogs.rb:1032 src/include/cluster/dialogs.rb:1044 +#: src/include/cluster/dialogs.rb:995 src/include/cluster/dialogs.rb:1007 msgid "Del" msgstr "Удалить" -#: src/include/cluster/dialogs.rb:1033 src/include/cluster/dialogs.rb:1045 +#: src/include/cluster/dialogs.rb:996 src/include/cluster/dialogs.rb:1008 msgid "Edit" msgstr "Редактировать" -#: src/include/cluster/dialogs.rb:1039 +#: src/include/cluster/dialogs.rb:1002 msgid "Sync File" msgstr "Файл синхронизации" -#: src/include/cluster/dialogs.rb:1046 +#: src/include/cluster/dialogs.rb:1009 msgid "Add Suggested Files" msgstr "Добавить предложенные файлы" -#: src/include/cluster/dialogs.rb:1055 +#: src/include/cluster/dialogs.rb:1018 msgid "Generate Pre-Shared-Keys" msgstr "Сгенерировать ключи" #. remove duplicated elements -#: src/include/cluster/dialogs.rb:1179 +#: src/include/cluster/dialogs.rb:1143 msgid "Csync2 Status Unknown" msgstr "Состояние Csync2 неизвестно" -#: src/include/cluster/dialogs.rb:1182 +#: src/include/cluster/dialogs.rb:1146 msgid "Turn csync2 ON" msgstr "Включить csync2" -#: src/include/cluster/dialogs.rb:1185 +#: src/include/cluster/dialogs.rb:1149 msgid "Turn csync2 OFF" msgstr "Выключить csync2" -#: src/include/cluster/dialogs.rb:1215 +#: src/include/cluster/dialogs.rb:1179 msgid "Enter a hostname" msgstr "Введите имя узла" # translators: error message for share command line action # must provide the share name -#: src/include/cluster/dialogs.rb:1229 +#: src/include/cluster/dialogs.rb:1193 msgid "Edit the hostname" msgstr "Редактировать имя узла" -#: src/include/cluster/dialogs.rb:1243 +#: src/include/cluster/dialogs.rb:1207 msgid "Enter a filename to synchronize" msgstr "Введите имя файла для синхронизации" -#: src/include/cluster/dialogs.rb:1258 +#: src/include/cluster/dialogs.rb:1222 msgid "Edit the filename" msgstr "Редактировать имя файла" #. key file exist -#: src/include/cluster/dialogs.rb:1290 +#: src/include/cluster/dialogs.rb:1254 msgid "" "Key file %1 already exist.\n" "Do you want to overwrite it?" @@ -341,12 +331,12 @@ "Вы желаете записать поверх него?" #. remove exist key file -#: src/include/cluster/dialogs.rb:1300 +#: src/include/cluster/dialogs.rb:1264 msgid "Delete key file %1 failed." msgstr "Не удалось удалить файл ключа %1." #. generate key file -#: src/include/cluster/dialogs.rb:1314 +#: src/include/cluster/dialogs.rb:1278 msgid "" "Key file %1 is generated.\n" "Clicking \"Add Suggested Files\" button adds it to sync list." @@ -354,12 +344,12 @@ "Файл ключа %1 создан.\n" "Нажатие кнопки «Добавить предложенные файлы» добавит его в список синхронизации." -#: src/include/cluster/dialogs.rb:1321 +#: src/include/cluster/dialogs.rb:1285 msgid "Key generation failed." msgstr "Не удалось создать ключ." #. SaveCsync2(); -#: src/include/cluster/dialogs.rb:1383 +#: src/include/cluster/dialogs.rb:1347 msgid "" "Conntrackd is a daemon which helps to duplicate firewall status between cluster nodes.\n" "YaST can help to configure some basic aspects of conntrackd.\n" @@ -369,28 +359,38 @@ "YaST может помочь настроить некоторые основные аспекты работы conntrackd.\n" "Вам нужно запустить его с помощью ocf:heartbeat:conntrackd." -#: src/include/cluster/dialogs.rb:1394 +#: src/include/cluster/dialogs.rb:1358 msgid "Dedicated Interface:" msgstr "Выделенный интерфейс:" -#: src/include/cluster/dialogs.rb:1397 +#: src/include/cluster/dialogs.rb:1361 msgid "IP:" msgstr "IP:" -#: src/include/cluster/dialogs.rb:1400 +#: src/include/cluster/dialogs.rb:1364 msgid "Group Number:" msgstr "Номер группы:" -#: src/include/cluster/dialogs.rb:1404 +#: src/include/cluster/dialogs.rb:1368 msgid "Generate /etc/conntrackd/conntrackd.conf" msgstr "Создать /etc/conntrackd/conntrackd.conf" -#: src/include/cluster/dialogs.rb:1471 +#: src/include/cluster/dialogs.rb:1435 msgid "The Group Number must be a positive integer" msgstr "Номер группы должен быть положительным целым числом" #. All helps are here #: src/include/cluster/helps.rb:35 +#, fuzzy +#| msgid "" +#| "<p><b><big>Bind Network Address</big></b><br>This specifies the address which the openais executive should bind. This address should always end in zero. If the totem traffic should be routed over 192.168.5.92, set bindnetaddr to 192.168.5.0.<br>This may also be an IPV6 address, in which case IPV6 networking will be used. In this case, the full address must be specified and there is no automatic selection of the network interface within a specific subnet as with IPv4. If IPv6 networking is used, the nodeid field must be specified.<br></p>\n" +#| "<p><b><big>Multicast Address</big></b><br>This is the multicast address used by openais executive. The default should work for most networks, but the network administrator should be queried about a multicast address to use. Avoid 224.x.x.x because this is a \"config\" multicast address.<br>This may also be an IPV6 multicast address, in which case IPV6 networking will be used. If IPv6 networking is used, the nodeid field must be specified.</p>\n" +#| "<p><b><big>Port</big></b><br>This specifies the UDP port number. It is possible to use the same multicast address on a network with the openais services configured for different UDP ports.<br></p>\n" +#| "<p><b><big>Member Address</big></b><br>This list specifies all the nodes in the cluster by IP address. This could be configurable when using udpu(Unicast). <br></p>\n" +#| "<p><b><big>Node ID</big></b><br>This configuration option is optional when using IPv4 and required when using IPv6. This is a 32 bit value specifying the node identifier delivered to the cluster membership service. If this is not specified with IPv4, the node id will be determined from the 32 bit IP address the system to which the system is bound with ring identifier of 0. The node identifier value of zero is reserved and should not be used.<br></p>\n" +#| "<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, which may be none, active, or passive. Active replication offers slightly lower latency from transmit to delivery in faulty network environments but with less performance. Passive replication may nearly double the speed of the totem protocol if the protocol doesn't become cpu bound. The final option is none, in which case only one network interface will be used to operate the totem protocol. If only one interface directive is specified, none is automatically chosen. If multiple interface directives are specified, only active or passive may be chosen.<br></p>\n" +#| "<p><b><big>Expected votes</big></b><br>Expect vote number for voting quorum. Will be automatically calculated when the nodelist {} section is present in corosync.conf or can be specified in the quorum {} section.<br></p>\n" +#| "<p><b><big>Auto Generate Node ID</big></b><br>Nodeid is required when using IPv6. Auto node ID enabled will generate nodeid automatically.<br></p>\n" msgid "" "<p><b><big>Bind Network Address</big></b><br>This specifies the address which the openais executive should bind. This address should always end in zero. If the totem traffic should be routed over 192.168.5.92, set bindnetaddr to 192.168.5.0.<br>This may also be an IPV6 address, in which case IPV6 networking will be used. In this case, the full address must be specified and there is no automatic selection of the network interface within a specific subnet as with IPv4. If IPv6 networking is used, the nodeid field must be specified.<br></p>\n" "<p><b><big>Multicast Address</big></b><br>This is the multicast address used by openais executive. The default should work for most networks, but the network administrator should be queried about a multicast address to use. Avoid 224.x.x.x because this is a \"config\" multicast address.<br>This may also be an IPV6 multicast address, in which case IPV6 networking will be used. If IPv6 networking is used, the nodeid field must be specified.</p>\n" @@ -398,7 +398,7 @@ "<p><b><big>Member Address</big></b><br>This list specifies all the nodes in the cluster by IP address. This could be configurable when using udpu(Unicast). <br></p>\n" "<p><b><big>Node ID</big></b><br>This configuration option is optional when using IPv4 and required when using IPv6. This is a 32 bit value specifying the node identifier delivered to the cluster membership service. If this is not specified with IPv4, the node id will be determined from the 32 bit IP address the system to which the system is bound with ring identifier of 0. The node identifier value of zero is reserved and should not be used.<br></p>\n" "<p><b><big>rrp_mode</big></b><br>This specifies the mode of redundant ring, which may be none, active, or passive. Active replication offers slightly lower latency from transmit to delivery in faulty network environments but with less performance. Passive replication may nearly double the speed of the totem protocol if the protocol doesn't become cpu bound. The final option is none, in which case only one network interface will be used to operate the totem protocol. If only one interface directive is specified, none is automatically chosen. If multiple interface directives are specified, only active or passive may be chosen.<br></p>\n" -"<p><b><big>Expected votes</big></b><br>Expect vote number for voting quorum. Will be automatically calculated when the nodelist {} section is present in corosync.conf or can be specified in the quorum {} section.<br></p>\n" +"<p><b><big>Expected votes</big></b><br>Expect vote number for voting quorum. Will be automatically calculated when the nodelist {} section is present in corosync.conf (the list will be generated when using unicast transport) or can be specified in the quorum {} section (Expect votes should use the total node numble of the cluster). If Expected votes presents in unicast transport, the value will override the one automatically calculated.<br></p>\n" "<p><b><big>Auto Generate Node ID</big></b><br>Nodeid is required when using IPv6. Auto node ID enabled will generate nodeid automatically.<br></p>\n" msgstr "" "<p><b><big>Присвоить адрес сети</big></b><br>Здесь указывается адрес, который должен присвоить себе openais. Этот адрес всегда должен заканчиваться на ноль. Если трафик totem следует переправлять через 192.168.5.92, задайте bindnetaddr значение 192.168.5.0.<br>Также можно использовать IPv6-адрес, в этом случае будет использоваться сеть IPv6. При этом необходимо указывать полный адрес, а автоматический выбор сетевого интерфейса в указанной подсети, как для IPv4, недоступен. Если используется сеть IPv6, необходимо заполнять поле nodeid.<br></p>\n" @@ -411,16 +411,20 @@ "<p><b><big>Автоматически создавать ID узла</big></b><br>Nodeid требуется при использовании IPv6. При включении этой опции nodeid будет создан автоматически.<br></p>\n" #: src/include/cluster/helps.rb:45 +#, fuzzy +#| msgid "" +#| "\n" +#| "<p><b><big>Threads</big></b><br>This directive controls how many threads are used to encrypt and send multicast messages. If secauth is off, the protocol will never use threaded sending. If secauth is on, this directive allows systems to be configured to use multiple threads to encrypt and send multicast messages. A thread directive of 0 indicates that no threaded send should be used. This mode offers best performance for non-SMP systems. The default is 0. <br></p>\n" +#| "<p><b><big>Enable Security Auth</big></b><br>This specifies that HMAC/SHA1 authentication should be used to authenticate all messages. It further specifies that all data should be encrypted with the sober128 encryption algorithm to protect data from eavesdropping. Enabling this option adds a 36 byte header to every message sent by totem which reduces total throughput. Encryption and authentication consume 75% of CPU cycles in aisexec as measured with gprof when enabled. For 100Mbit networks with 1500 MTU frame transmissions: A throughput of 9Mb/s is possible with 100% cpu utilization when this option is enabled on 3GHz cpus. A throughput of 10Mb/s is possible wth 20% cpu utilization when this option is disabled on 3GHz cpus. For gig-e networks with large frame transmissions: A throughput of 20Mb/s is possible when this option is enabled on 3GHz cpus. A throughput of 60Mb/s is possible when this option is disabled on 3GHz cpus. The default is on. <br></p>\n" msgid "" "\n" -"<p><b><big>Threads</big></b><br>This directive controls how many threads are used to encrypt and send multicast messages. If secauth is off, the protocol will never use threaded sending. If secauth is on, this directive allows systems to be configured to use multiple threads to encrypt and send multicast messages. A thread directive of 0 indicates that no threaded send should be used. This mode offers best performance for non-SMP systems. The default is 0. <br></p>\n" "<p><b><big>Enable Security Auth</big></b><br>This specifies that HMAC/SHA1 authentication should be used to authenticate all messages. It further specifies that all data should be encrypted with the sober128 encryption algorithm to protect data from eavesdropping. Enabling this option adds a 36 byte header to every message sent by totem which reduces total throughput. Encryption and authentication consume 75% of CPU cycles in aisexec as measured with gprof when enabled. For 100Mbit networks with 1500 MTU frame transmissions: A throughput of 9Mb/s is possible with 100% cpu utilization when this option is enabled on 3GHz cpus. A throughput of 10Mb/s is possible wth 20% cpu utilization when this option is disabled on 3GHz cpus. For gig-e networks with large frame transmissions: A throughput of 20Mb/s is possible when this option is enabled on 3GHz cpus. A throughput of 60Mb/s is possible when this option is disabled on 3GHz cpus. The default is on. <b r></p>\n" msgstr "" "\n" "<p><b><big>Потоки</big></b><br>Данная опция определяет количество потоков, используемых для шифрования и отправки многоадресных сообщений. Если опция secauth отключена, протокол не будет использовать многопоточную отправку. Если опция secauth включена, то эта опция позволяет настроить использование системой нескольких потоков для шифрования и отправки многоадресных сообщений. Нулевое значение отключает многопоточную отправку. Этот режим обеспечивает наилучшую производительность для систем без SMP. Значение по умолчанию 0. <br></p>\n" "<p><b><big>Включить безопасную аутентификацию</big></b><br> Данная опция указывает, что для аутентификации всех сообщений необходимо использовать HMAC/SHA1. Также она указывает на то, что все данные необходимо шифровать алгоритмом sober128 для защиты от перехвата. Включение этой опции добавляет заголовок длиной 36 байтов к каждому сообщению totem, что уменьшает общую пропускную способность. Шифрование и аутентификация потребляют 75% циклов CPU в aisexec при измерениях gprof. Для 100-мегабитных сетей с размером MTU 1500: при включении опции пропускная способность достига� �т 9 Мб/с при 100% загрузке процессора 3 ГГц. При отключении опции пропускная способность достигнет 10 Мб/с при 20% загрузке процессора 3 ГГц. Для гигабитных сетей с большими фреймами: при включении опции пропускная способность достигает 20 Мб/с на процессоре 3 ГГц. При отключении опции пропускная способность достигает 60 Мб/с на процессоре 3 ГГц. По умолчанию данная опция включена.<br></p>\n" -#: src/include/cluster/helps.rb:50 +#: src/include/cluster/helps.rb:49 msgid "" "\n" "\t\t\t<p><b><big>Booting</big></b><br>Starting corosync service during boot or not</p>\n" @@ -432,7 +436,7 @@ "\t\t\t<p><b><big>Настройки брандмауэра</big></b><br>Открыть порт когда брандмауэр включён</p>\n" "\t\t\t" -#: src/include/cluster/helps.rb:56 +#: src/include/cluster/helps.rb:55 msgid "" "\n" "\t\t<p><b><big>Sync Host</big></b><br>The hostnames used here must be the local hostnames of the cluster nodes. That means you must use exactly the same string as printed out by the hostname command.</p>\n" @@ -446,7 +450,7 @@ "\t\t<p><b><big>Ключи</big></b><br>Аутентификация выполняется по IP-адресам и ключам Csync2. Файл ключа создаётся командой csync2 -k /etc/csync2/key_hagroup. Файл key_hagroup нужно скопировать на все члены кластера вручную после его создания.</p>\n" "\t" -#: src/include/cluster/helps.rb:63 +#: src/include/cluster/helps.rb:62 msgid "" "\n" "\t\t<p><b><big>Dedicated Interface</big></b><br>A dedicated network interface for syncing. The interface must support multicast, and is UP for using. You may have to have it pre-configured. </p>\n" @@ -464,7 +468,7 @@ # Novell Translation #. Read dialog help 1/2 -#: src/include/cluster/helps.rb:72 +#: src/include/cluster/helps.rb:71 msgid "" "<p><b><big>Initializing cluster Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -473,7 +477,7 @@ "Пожалуйста, подождите…<br></p>\n" #. Read dialog help 2/2 -#: src/include/cluster/helps.rb:76 +#: src/include/cluster/helps.rb:75 msgid "" "<p><b><big>Aborting Initialization:</big></b><br>\n" "Safely abort the configuration utility by pressing <b>Abort</b> now.</p>\n" @@ -483,7 +487,7 @@ # Write dialog help 1/2 #. Write dialog help 1/2 -#: src/include/cluster/helps.rb:80 +#: src/include/cluster/helps.rb:79 msgid "" "<p><b><big>Saving cluster Configuration</big></b><br>\n" "Please wait...<br></p>\n" @@ -492,7 +496,7 @@ "Пожалуйста, подождите…<br></p>\n" #. Write dialog help 2/2 -#: src/include/cluster/helps.rb:84 +#: src/include/cluster/helps.rb:83 msgid "" "<p><b><big>Aborting Saving:</big></b><br>\n" "Abort the save procedure by pressing <b>Abort</b>.\n" @@ -515,101 +519,110 @@ msgstr "Инициализация…" #. Cluster read dialog caption -#: src/modules/Cluster.rb:395 +#: src/modules/Cluster.rb:390 msgid "Initializing cluster Configuration" msgstr "Инициализация настроек кластера" #. Progress stage 1/3 -#: src/modules/Cluster.rb:411 +#: src/modules/Cluster.rb:406 msgid "Read the database" msgstr "Читать базу данных" #. Progress stage 2/3 -#: src/modules/Cluster.rb:413 +#: src/modules/Cluster.rb:408 msgid "Read the previous settings" msgstr "Читать предыдущие настройки" #. Progress stage 3/3 -#: src/modules/Cluster.rb:415 +#: src/modules/Cluster.rb:410 msgid "Read SuSEFirewall Settings" msgstr "Читать настройки SuSEFirewall" #. Progress step 1/3 -#: src/modules/Cluster.rb:419 +#: src/modules/Cluster.rb:414 msgid "Reading the database..." msgstr "Чтение базы данных…" #. Progress step 2/3 -#: src/modules/Cluster.rb:421 +#: src/modules/Cluster.rb:416 msgid "Reading the previous settings..." msgstr "Чтение предыдущих настроек…" #. Progress step 3/3 -#: src/modules/Cluster.rb:423 +#: src/modules/Cluster.rb:418 msgid "Reading SuSEFirewall settings..." msgstr "Чтение настроек SuSEFirewall…" #. Progress finished #. Progress finished -#: src/modules/Cluster.rb:425 src/modules/Cluster.rb:527 +#: src/modules/Cluster.rb:420 src/modules/Cluster.rb:522 msgid "Finished" msgstr "Готово" -#: src/modules/Cluster.rb:440 +#: src/modules/Cluster.rb:435 msgid "Cannot install required package" msgstr "Невозможно установить требуемый пакет" #. read database -#: src/modules/Cluster.rb:449 +#: src/modules/Cluster.rb:444 msgid "Cannot load existing configuration" msgstr "Невозможно загрузить существующую конфигурацию" # Novell Translation #. Error message -#: src/modules/Cluster.rb:460 +#: src/modules/Cluster.rb:455 msgid "Cannot read database1." msgstr "Невозможно прочитать database1." #. Error message -#: src/modules/Cluster.rb:468 +#: src/modules/Cluster.rb:463 msgid "Cannot read database2." msgstr "Невозможно прочитать database2." #. Error message -#: src/modules/Cluster.rb:484 +#: src/modules/Cluster.rb:479 msgid "Cannot detect devices." msgstr "Невозможно обнаружить устройства." #. Cluster read dialog caption -#: src/modules/Cluster.rb:502 +#: src/modules/Cluster.rb:497 msgid "Saving cluster Configuration" msgstr "Сохранение настроек кластера" #. Progress stage 1/2 -#: src/modules/Cluster.rb:517 +#: src/modules/Cluster.rb:512 msgid "Write the settings" msgstr "Записать настройки" #. Progress stage 2/2 -#: src/modules/Cluster.rb:519 +#: src/modules/Cluster.rb:514 msgid "Save changes to SuSEFirewall" msgstr "Сохранить изменения в SuSEFirewall" #. Progress step 1/2 -#: src/modules/Cluster.rb:523 +#: src/modules/Cluster.rb:518 msgid "Writing the settings..." msgstr "Запись настроек…" #. Progress step 2/2 -#: src/modules/Cluster.rb:525 +#: src/modules/Cluster.rb:520 msgid "Saving changes to SuSEFirewall..." msgstr "Сохранение изменений в SuSEFirewall…" #. Error message -#: src/modules/Cluster.rb:537 +#: src/modules/Cluster.rb:532 msgid "Cannot write settings." msgstr "Невозможно записать настройки." +#~ msgid "Number of threads must be integer" +#~ msgstr "Число потоков должно быть целым числом" + +#~ msgid "Number of threads must larger then 0" +#~ msgstr "Число потоков должно быть больше 0" + +#~ msgid "Threads:" +#~ msgstr "Потоки:" + #~ msgid "nodeid" #~ msgstr "nodeid"