* mike [09-19-18 14:06]:

    Hi,

            OK I had this working on my old system and now all I get is--

                        /etc/init.d/FAHClient start FAILED

            when run as root...zypper installed the 3 fah packages and it refuses to start.

            using latest tumbleweed.....am I missing something??

                                        mike

did you follow the instructions at: https://en.opensuse.org/Folding@Home is anything different now than before, ie: program names, ... honestly, unless your are only addressing someone who has the app running or is familiar with it, you provide very little information. no one knows what "system indicates" or what you have installed or how or ... when posing a problem or asking a question, please realize that no one else is sitting in front of your display. and latest tw does not tell anyone when you last updated, the version may have changed since you posted. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

* mike [09-19-18 14:30]:

On 9/19/18 2:20 PM, Patrick Shanahan wrote:

...

* mike [09-19-18 14:06]:

...

    Hi,

            OK I had this working on my old system and now all I get is--

                        /etc/init.d/FAHClient start FAILED

            when run as root...zypper installed the 3 fah packages and it refuses to start.

            using latest tumbleweed.....am I missing something??

                                        mike

did you follow the instructions at: https://en.opensuse.org/Folding@Home

        thanks Patrick but these instructions are like two years old....

        I downloaded the latest rpms from the Folding website and installed

        them with zypper.  Supposedly the service starts on boot, but I tried

        manually since the system was already running...

...

is anything different now than before, ie: program names, ...

    I don't think so, and I believe it was you that helped me fix this last

    time, and that was the way it started as a service before....

...

honestly, unless your are only addressing someone who has the app running or is familiar with it, you provide very little information. no one knows what "system indicates" or what you have installed or how or ...

when posing a problem or asking a question, please realize that no one else is sitting in front of your display.

and latest tw does not tell anyone when you last updated, the version may have changed since you posted.

        that's another thing...is there a command that will print out the snapshot

        that was last installed?

        well it's not an emergency problem, I just wanted to use it later, like in

    cooler weather....running folding at home makes the computer a good room

    warmer :)

well, it probably has been adjusted to use systemd init rather than the /etc/init.d/xxxx. you might try: systemctl start more you might do rpm -ql |grep system to get the correct name to systemd also you might need to do: systemctl enable I don't have it installed and really not interested enough to do so, and time constraints .... -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

* mike [09-19-18 15:55]: [...]

...

you might try: systemctl start

        Failed to start FAHClient.service Unit FAClient.service not found

        If I try to start it with just the command FAHClient  i get - error while loading

        shared libraries : libssl.so.10

        I have openssl installed, except there is no libssl.so.10

probably the problem, I only see libssl.so.1.0.0 and libssl.so.1.1 I would guess that the shared library is looking for the wrong version, a packager mistake (???) and probably worthy of a bug report. you might try making a link for libssl.so.10 to libssl.so.1.0.0 and destroy it if it does no help that said, I am not a programmer or packager and may be all wet. perhaps someone more knowledgable will contribute. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.org openSUSE Community Member facebook/ptilopteri Registered Linux User #207535 @ http://linuxcounter.net Photos: http://wahoo.no-ip.org/piwigo paka @ IRCnet freenode -- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

The RPM is built for (probably) CentOS6, not for (Open)SUSE. RH has a different naming scheme, and a libssl.so.10 is therefore (most probably) coming from an OpenSSL 1.0.1. Unfortunately it seems they have close-sourced the client, at least the referenced https://github.com/FoldingAtHome/fah-client.git is no longer open, so following the build instructions from the README.md in the binary fahclient RPM also is no option. On Wed, Sep 19, 2018 at 10:08 PM Knurpht-openSUSE wrote:

Op woensdag 19 september 2018 22:05:30 CEST schreef Patrick Shanahan:

...

* mike [09-19-18 15:55]: [...]

...

...

you might try: systemctl start

Failed to start FAHClient.service Unit FAClient.service not found

If I try to start it with just the command FAHClient i get - error while loading

shared libraries : libssl.so.10

I have openssl installed, except there is no libssl.so.10

probably the problem, I only see libssl.so.1.0.0 and libssl.so.1.1

I would guess that the shared library is looking for the wrong version, a packager mistake (???) and probably worthy of a bug report. you might try making a link for libssl.so.10 to libssl.so.1.0.0 and destroy it if it does no help

that said, I am not a programmer or packager and may be all wet. perhaps someone more knowledgable will contribute. This probably has to do with the rpms not having been changed to new openssl versions.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team

-- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

-- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

On 9/20/18 9:35 AM, Mischa Salle wrote:

...

The RPM is built for (probably) CentOS6, not for (Open)SUSE. RH has a different naming scheme, and a libssl.so.10 is therefore (most probably) coming from an OpenSSL 1.0.1. Unfortunately it seems they have close-sourced the client, at least the referenced https://github.com/FoldingAtHome/fah-client.git is no longer open, so following the build instructions from the README.md in the binary fahclient RPM also is no option.

Yes Misha I see a lot of solutions for other distros...many suggest compat-libopenssl10

to get the necessary softlinks to get FAHClient running, but I can't seem to find this in the

opensuse repositories. Does anyone know where this could be found ??

Thanks in advance......mike

...

On Wed, Sep 19, 2018 at 10:08 PM Knurpht-openSUSE wrote:

...

Op woensdag 19 september 2018 22:05:30 CEST schreef Patrick Shanahan:

...

* mike [09-19-18 15:55]: [...]

...

...

you might try: systemctl start

Failed to start FAHClient.service Unit FAClient.service not found

If I try to start it with just the command FAHClient i get -

error while loading

shared libraries : libssl.so.10

I have openssl installed, except there is no libssl.so.10

probably the problem, I only see libssl.so.1.0.0 and libssl.so.1.1

I would guess that the shared library is looking for the wrong version, a packager mistake (???) and probably worthy of a bug report. you might try making a link for libssl.so.10 to libssl.so.1.0.0 and destroy it if it does no help

that said, I am not a programmer or packager and may be all wet. perhaps someone more knowledgable will contribute.

This probably has to do with the rpms not having been changed to new openssl versions.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team

-- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org You might try this package, compat-libopenssl10 from my repo. It's branched from a Tw only repo, I changed the spec file to use /usr/lib64 instead of /

Op donderdag 20 september 2018 17:46:37 CEST schreef mike: lib64, it does nothing but create some symlinks. I can't guarantee that this works, but you could at least give it a try. AFAIK the packages from other distros don't do it different. https://build.opensuse.org/package/show/home:Knurpht:Extras/compat-libopenss... Good luck -- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

Op donderdag 20 september 2018 20:17:23 CEST schreef mike:

On 9/20/18 12:15 PM, Knurpht-openSUSE wrote:

...

Op donderdag 20 september 2018 17:46:37 CEST schreef mike:

...

On 9/20/18 9:35 AM, Mischa Salle wrote:

...

The RPM is built for (probably) CentOS6, not for (Open)SUSE. RH has a different naming scheme, and a libssl.so.10 is therefore (most probably) coming from an OpenSSL 1.0.1. Unfortunately it seems they have close-sourced the client, at least the referenced https://github.com/FoldingAtHome/fah-client.git is no longer open, so following the build instructions from the README.md in the binary fahclient RPM also is no option.

Yes Misha I see a lot of solutions for other distros...many

suggest compat-libopenssl10

to get the necessary softlinks to get FAHClient running, but I

can't seem to find this in the

opensuse repositories. Does anyone know where this could be found ??

Thanks in advance......mike

...

On Wed, Sep 19, 2018 at 10:08 PM Knurpht-openSUSE

wrote:

...

...

...

Op woensdag 19 september 2018 22:05:30 CEST schreef Patrick Shanahan:

...

* mike [09-19-18 15:55]: [...]

>> you might try: systemctl start >> > Failed to start FAHClient.service Unit FAClient.service not > found > > If I try to start it with just the command FAHClient i get > - > > error > while loading > > shared libraries : libssl.so.10 > > I have openssl installed, except there is no libssl.so.10

probably the problem, I only see libssl.so.1.0.0 and libssl.so.1.1

I would guess that the shared library is looking for the wrong version, a packager mistake (???) and probably worthy of a bug report. you might try making a link for libssl.so.10 to libssl.so.1.0.0 and destroy it if it does no help

that said, I am not a programmer or packager and may be all wet. perhaps someone more knowledgable will contribute.

This probably has to do with the rpms not having been changed to new openssl versions.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team

-- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org

You might try this package, compat-libopenssl10 from my repo. It's branched from a Tw only repo, I changed the spec file to use /usr/lib64 instead of / lib64, it does nothing but create some symlinks. I can't guarantee that this works, but you could at least give it a try. AFAIK the packages from other distros don't do it different.

Well thanks knurpht....I installed it and it did create some symlinks, however

FAHClient says that it cannot find libssl.so.10, OPENSSL_1.0.1_EC, and libcrypto.so.10

I do see the symlinks for 2 but I don't even see the OPENSSL_1.0.1_EC on the system.

I was going to try the fedora built compat but it wants to make too many changes.

Also how do I get your key from the build site?

mike

...

https://build.opensuse.org/package/show/home:Knurpht:Extras/compat-libopen ssl10

Good luck MMmm, already had my doubts given the age of the package.

-- Gertjan Lettink a.k.a. Knurpht openSUSE Board Member openSUSE Forums Team -- To unsubscribe, e-mail: opensuse-support+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-support+owner@opensuse.org