Hi, Since the last versions of TW, I can't print anymore. If I try o print from Okular, it reports Ghostscript is needed for the print preview and postscript support but it has security issues and is not installed by default. If you only open trusted documents, you can install the 'okular-spectre' package. That is not true, ghostscript is installed (v. 10.02.1-1.3). If I try to print a test page from cups, after a short while I get "unable to locate printer." From other TW systems in the house (updated less frequently) printing is no problem. cups reports about the printer: Description: Lexmark CS410 Series Location: Lexmark CS410DN op keamer Jogchum Driver: CS410dn - IPP Everywhere (color, 2-sided printing) Connection: dnssd://Lexmark%20CS410dn._ipp._tcp.local/?uuid=42f6ed3a-e070-4f9e-a6f0-b67e565e81d4 Defaults: job-sheets=none, none media=iso_a4_210x297mm sides=one-sided And from lpinfo: lpinfo -v network beh file cups-brf:/ file boomaga:/ network lpd network http direct hp network https network ipps network socket network ipp network smb network dnssd://Lexmark%20CS410dn._ipps._tcp.local/?uuid=42f6ed3a-e070-4f9e-a6f0-b67e565e81d4 network dnssd://Lexmark%20CS410dn._pdl-datastream._tcp.local/?uuid=42f6ed3a-e070-4f9e-a6f0-b67e565e81d4 network socket://192.168.178.32 network ipps://Lexmark%20CS410dn._ipps._tcp.local/ The network connection is OK: I can ping the address given by lpinfo, an I get the printer's status info visiting that address in the browser. Anyone an idea what be might going on here? regards, Jogchum