On 12/4/20 12:15 PM, michael.kasimir@gmx.de wrote:
Hi,
xsane-0.999-lp151.2.3.x86_64.rpm
simple-scan-3.34.2-lp152.1.4.x86_64.rpm
skanlite-2.1.0.1-lp152.3.13.x86_64.rpm
and the correct adaptions of SANE to the HP Scanjet 5300c have been made.
If I try to scan e.g. an A4 page (210 x 297 mm) in 200 x 200 dpi scanning works.
In the basic menue the following parameters are shown:
1648 *2326*24 (11,0MB)
209,49 mm x 296,16 mm
In the previewer of the scan the size is indicated as 1648 * 4652 pixel, ..., 200 dpi x 200 dpi
If I save the scanned as page .pdf it has the double height (as indicated by the above values)
What can I do now?
Mit freundlichen Grüßen / Kind regards
Michael Kasimir
If you did not already, you should try to install the scanner with YaST/Scanner. It will install the HP driver avision. The driver info indicates that it supports up to 2400 dpi, but also cautions that some firmware revisions have x-axis scaling problems when using >1200 dpi. Both simple-scan and skanlite use the xsane backend which is probably where the problem is. The HP driver adds on to xsane. I am using another HP scanner with its HP provided driver and it scans perfectly. -- dg