Hi, I have AMD desktop with 4 drives, and installation of TW works, but system doesn't boot. I have to press F12 and manually select UEFI opensuse-secureboot or opensuse item. The machine has - 2x 2TB NVMe - used as SW RAID0 for encrypted /home - 1x 1TB SSD for /boot/efi and encrypted LVM with / and swap - 1x 5TB HDD for internal backups (rsync with cron) Interestingly, when I boot install USB drive, I randomly see SSD as sda or sdb, and HDD as sdb or sda. Anyway, regardless I place /boot/efi on beginning of SSD or 1st NVMe, BIOS has troubles to find boot openSUSE. Also, when I press F12 to manually select boot device, I sometimes get info that the firmware was reset (Problem with CMOS battery or so?), but otherwise everything seems correct there. When I install Leap with above setup, it works. I have similar setup (2x NVMe, 1st with /boot/efi and encrypted LVM with /and swap, and 2nd with encrypted / home) on another machine, and I use to use setup with /boot/efi and rest in encrypted LVM for years, so I'm sure this setup works reliably. So I wonder if I do something wrong or I face some issue with motherboard of my desktop...? Yours, V. -- Vojtěch Zeisek https://trapa.cz/ Komunita openSUSE GNU/Linuxu Community of the openSUSE GNU/Linux https://www.opensuse.org/