Hello, I'm trying a bare metal install of Tumbleweed (snapshot 20021218...but I've had the same result with several predecessor snapshots) on an HP Envy x360 (15z-ds100) with the "Intel Wi-FI 6 AX 200 (2x2) and Bluetooth 5 combo." When I get to the "Network Settings" page, no hardware is detected. I could install without networking and tackle the issue later, but thought I'd seek advice here first (maybe there's a fix that will help others in the future). My troubleshooting thus far (which may or may not be helpful) consists of switching over to a terminal (ctrl+alt F1), removing the iwlwifi module ("rmmod iwlwifi") and adding it back via "modprobe iwlwifi". That last command produces the following output: [ 1544.250127] Intel(R) Wireless WiFi driver for Linux [ 1544.259285] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-56.ucode failed with error -2 [ 1544.259308] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-55.ucode failed with error -2 [ 1544.259325] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-54.ucode failed with error -2 [ 1544.259342] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-53.ucode failed with error -2 [ 1544.259357] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-52.ucode failed with error -2 [ 1544.259374] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-51.ucode failed with error -2 [ 1544.259390] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-50.ucode failed with error -2 [ 1544.259406] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-49.ucode failed with error -2 [ 1544.259422] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-48.ucode failed with error -2 [ 1544.259439] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-47.ucode failed with error -2 [ 1544.259456] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-46.ucode failed with error -2 [ 1544.259472] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-45.ucode failed with error -2 [ 1544.259489] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-44.ucode failed with error -2 [ 1544.259510] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-43.ucode failed with error -2 [ 1544.259528] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-42.ucode failed with error -2 [ 1544.259545] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-41.ucode failed with error -2 [ 1544.259561] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-40.ucode failed with error -2 [ 1544.259574] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-cc-a0-39.ucode failed with error -2 [ 1544.259575] iwlwifi 0000:02:00.0: no suitable firmware found! [ 1544.259576] iwlwifi 0000:02:00.0: minimum version required: iwlwifi-cc-a0-39 [ 1544.259577] iwlwifi 0000:02:00.0: maximum version supported: iwlwifi-cc-a0-56 [ 1544.259578] iwlwifi 0000:02:00.0: check git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git I've attempted to copy additional firmware into /lib/firmware, but that location is read-only (and not easily made read+write from my experiments). Should I just proceed with the install and address the network issue later (it may not even be there after install) or is there more troubleshooting you can suggest (or other options). FYI, I don't have a USB-to-RJ45 adapter at the moment, so I can't use wired networking. Thank you! Matthew