On 07/10/2020 20.02, Carlos E. R. wrote:
Hi,
I need to use https://meet2.opensuse.org/ and it just doesn't work for me.
https://meet.opensuse.org/ works fine. The camera does work during the setup on meet2, just not when I open a meeting. says "camera does not support required video resolution".
Using Leap 15.1 on three computers.
Laptop 1 says on https://test.webrtc.org/, camera section: Check resolution 320x240 yes Check resolution 640x480 yes Check resolution 1280x720 no Check supported resolutions yes [ OK ] Supported: 160x120 [ OK ] Supported: 160x120 [ INFO ] 320x180 not supported [ OK ] Supported: 320x240 [ INFO ] 640x360 not supported [ OK ] Supported: 640x480 [ INFO ] 768x576 not supported [ INFO ] 1024x576 not supported [ INFO ] 1280x720 not supported [ INFO ] 1280x768 not supported [ INFO ] 1280x800 not supported [ INFO ] 1920x1080 not supported [ INFO ] 1920x1200 not supported [ INFO ] 3840x2160 not supported [ INFO ] 4096x2160 not supported Legolas:~ # hwinfo --camera Legolas:~ # Legolas:~ # hwinfo --usb ... 03: USB 00.1: 0000 Unclassified device [Created at usb.122] Unique ID: NwzV.qgJNtqgvqj2 Parent ID: k4bc.2DFUsyrieMD SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1 SysFS BusID: 1-5:1.1 Hardware Class: unknown Model: "Acer Lenovo EasyCamera" Hotplug: USB Vendor: usb 0x5986 "Acer, Inc" Device: usb 0x0673 "Lenovo EasyCamera" Revision: "42.08" Serial ID: "200901010001" Driver: "uvcvideo" Driver Modules: "uvcvideo" Speed: 480 Mbps Module Alias: "usb:v5986p0673d4208dcEFdsc02dp01ic0Eisc02ip00in01" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #4 (Hub) Laptop 2 says on https://test.webrtc.org/, camera section: Check resolution 320x240 Ok Check resolution 640x480 Ok Check resolution 1280x720 no Check supported resolutions Ok [ OK ] Supported: 160x120 [ OK ] Supported: 160x120 [ INFO ] 320x180 not supported [ OK ] Supported: 320x240 [ INFO ] 640x360 not supported [ OK ] Supported: 640x480 [ INFO ] 768x576 not supported [ INFO ] 1024x576 not supported [ INFO ] 1280x720 not supported [ INFO ] 1280x768 not supported [ INFO ] 1280x800 not supported [ INFO ] 1920x1080 not supported [ INFO ] 1920x1200 not supported [ INFO ] 3840x2160 not supported [ INFO ] 4096x2160 not supported minas-tirith:~ # hwinfo --camera minas-tirith:~ # hwinfo --usb ... 04: USB 00.0: 0000 Unclassified device [Created at usb.122] Unique ID: +4pb.ZsZeIl28cM9 Parent ID: FZIx.9T1GDCLyFd9 SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb8/8-4/8-4:1.0 SysFS BusID: 8-4:1.0 Hardware Class: unknown Model: "Quanta HP Webcam-101" Hotplug: USB Vendor: usb 0x0408 "Quanta Computer, Inc." Device: usb 0x0f41 "HP Webcam-101" Revision: "1.03" Serial ID: "QCM" Driver: "uvcvideo" Driver Modules: "uvcvideo" Device File: /dev/input/event13 Device Files: /dev/input/event13, /dev/input/by-id/usb-SN001_HP_Webcam-101_QCM-event-if00, /dev/input/by-path/pci-0000:00:1d.7-usb-0:4:1.0-event Device Number: char 13:77 Speed: 480 Mbps Module Alias: "usb:v0408p0F41d0103dcEFdsc02dp01ic0Eisc01ip00in00" Driver Info #0: Driver Status: uvcvideo is active Driver Activation Cmd: "modprobe uvcvideo" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #3 (Hub) -- Cheers / Saludos, Carlos E. R. (from oS Leap 15.1 x86_64 (Minas Tirith))