X1400 1002:7145 conntest+Xog.0.log
Card: Mobility X1400 PCI ID: 1002:7145 No X server loaded, No external cables connected Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_NONE LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063 -------------------------------------------------------------- when a vga cable is attached the DDC is also recognised. Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063 --------------------------------------------------------- I have also attached my Xorg.0.log because the driver asked nicely ;-) ----------------- If there's anything further don't hesitate to ask.
On Sat, Sep 22, 2007 at 02:02:20PM +0200, Ian Schram wrote:
Card: Mobility X1400 PCI ID: 1002:7145 No X server loaded, No external cables connected
Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_NONE LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063
-------------------------------------------------------------- when a vga cable is attached the DDC is also recognised.
Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063
--------------------------------------------------------- I have also attached my Xorg.0.log because the driver asked nicely ;-)
-----------------
If there's anything further don't hesitate to ask.
Can you provide more information about the board in question? The make and model of the laptop would also suffice. Thanks, Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
It's an acer aspire notebook.Sold as 5672 wlmi iirc.
the little sticker on the screen says 5670 though
lspci -vv
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA])
Subsystem: Acer Incorporated [ALI] Unknown device 0094
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- On Sat, Sep 22, 2007 at 02:02:20PM +0200, Ian Schram wrote: Card: Mobility X1400
PCI ID: 1002:7145
No X server loaded, No external cables connected Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00):
Load Detection: RHD_OUTPUT_NONE
HotPlug: RHD_HPD_NONE
DDC: RHD_DDC_NONE
LVDS Info:
18bits, single link, LDI Panel found.
Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
Macro: 0x0C720407, Clock Pattern: 0x0063 --------------------------------------------------------------
when a vga cable is attached the DDC is also recognised. Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00):
Load Detection: RHD_OUTPUT_DACA
HotPlug: RHD_HPD_NONE
DDC: RHD_DDC_0
LVDS Info:
18bits, single link, LDI Panel found.
Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4
Macro: 0x0C720407, Clock Pattern: 0x0063 ---------------------------------------------------------
I have also attached my Xorg.0.log because the driver asked nicely ;-) ----------------- If there's anything further don't hesitate to ask. Can you provide more information about the board in question? The make
and model of the laptop would also suffice. Thanks, Luc Verhaegen.
SUSE/Novell X Driver Developer. --
To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org
For additional commands, e-mail: radeonhd+help@opensuse.org
I had some spare time and i messed around, looking for things that could cause my odd conntests results, and I discovered that the "count = 32" in R5xxI2CStatus(void *map) is Tooo small for it to detect my DDC line. These are results with count set to 3200, I also tried to use these values in rhd_id.c, and change the sleeps there too but to no avail just yet. No monitor, just pannel Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_2 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063 vga monitor attached Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 RHD_DDC_2 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063 Anything more I can try? Ian Schram wrote:
It's an acer aspire notebook.Sold as 5672 wlmi iirc. the little sticker on the screen says 5670 though
lspci -vv
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 (prog-if 00 [VGA]) Subsystem: Acer Incorporated [ALI] Unknown device 0094 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
I also forgot to mention last time that it has a dvi and s-video out too, but i don't have the cables to connect them.Don't know what other information I can provide.
Ian
Luc Verhaegen wrote:
On Sat, Sep 22, 2007 at 02:02:20PM +0200, Ian Schram wrote:
Card: Mobility X1400 PCI ID: 1002:7145 No X server loaded, No external cables connected
Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_NONE HotPlug: RHD_HPD_NONE DDC: RHD_DDC_NONE LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063
-------------------------------------------------------------- when a vga cable is attached the DDC is also recognised.
Checking connectors on 0x7145, 0x1025, 0x0094 (@01:00:00): Load Detection: RHD_OUTPUT_DACA HotPlug: RHD_HPD_NONE DDC: RHD_DDC_0 LVDS Info: 18bits, single link, LDI Panel found. Power Timing: 0xF9F, 0x000, 0x03, 0x19, 0x1F4 Macro: 0x0C720407, Clock Pattern: 0x0063
--------------------------------------------------------- I have also attached my Xorg.0.log because the driver asked nicely ;-)
-----------------
If there's anything further don't hesitate to ask.
Can you provide more information about the board in question? The make and model of the laptop would also suffice.
Thanks,
Luc Verhaegen. SUSE/Novell X Driver Developer.
-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
participants (2)
-
Ian Schram
-
Luc Verhaegen