Re: [radeonhd] 0x95C5:0x1043:0x01F4: Asus EAH3450
Jim Paris writes:
Matthias Hopf wrote:
On Jun 24, 09 17:50:18 -0400, Jim Paris wrote:
I have an ASUS EAH3450 (0x95C5:0x1043:0x01F4, Newegg N82E16814121259), Option "HPD" "Off" Option "UseAtomBIOS" "On" - Without any device options, no connected monitors are detected and X doesn't start. - With only HPD Off, the DVI monitor is detected, but the VGA is not. - With only UseAtomBIOS On, the VGA monitor is detected, but DVI is not. - With both, both monitors work.
Please start 'X -logverbose 7' without these options and post the logfile (yes, it will shut down immediately). Also run 'conntest' as described in the README, once per monitor attached.
xorg.conf contains:
Section "Device" Identifier "video" Driver "radeonhd" EndSection
"X -logverbose 7" output is attached as radeonhd.log
For conntest, I ran "rhd_conntest 02:00.0 -s -x 256" for each case:
conntest-none.log: no monitors connected conntest-dvi.log: only DVI connected conntest-vga.log: only VGA connected conntest-both.log: both connected
While shuffling cables, I remembered that I have a KVM switch on the VGA (duh), so I also did:
conntest-vganokvm.log: only VGA connected, no KVM conntest-bothnokvm.log: both connected, no KVM
What I read out of this is: - The native load detection doesn't work while the one in AtomBIOS does. - HPD is not connected, DDC works as expected. - The flickering has nothing to do with the detection. If you can send me the BIOS for the card I can check up on the load detection. For the HPD issue Matthias has already pushed a fix. To dump the BIOS please do: rhd_conntest pci-tag -d It will create a file with the name <PCIid>.vga.rom. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
participants (1)
-
Egbert Eich