0x954F:0x1787:0x2271: club 3d Radeon HD4350
Card: http://www.club-3d.de/products/products_ending_page_7_with_id.cfm?product_id... Hello, this card will not work on a 1680x1050 TFT Monitor, connected via DVI, in it´s native resolution. The other resolutions (up to 1600x1200) are working fine. Connected via VGA, the card works fine with this monitor and the resoltution 1680x1050 I hope you can fix the problem Regards -- Michael Müller
On Jan 31, 10 19:31:55 +0100, michael wrote:
Card: http://www.club-3d.de/products/products_ending_page_7_with_id.cfm?product_id...
this card will not work on a 1680x1050 TFT Monitor, connected via DVI, in it´s native resolution. The other resolutions (up to 1600x1200) are working fine.
So what resolution does the monitor show if it supposed to show 1680x1050? The driver thinks it is running the resolution just fine:
(II) RADEONHD(0): Output DVI-I_2/digital using initial mode 1680x1050 (II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1680x1050" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
Hm. The mode seems to be a reduced blanking mode, but that should be
+hsync -vsync...
Please try the modelines
Modeline "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
Modeline "1680x1050R" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync
and use them with
Modes "1680x1050R"
and
Modes "1680x1050_60.00"
You can also add the modes and select them dynamically with xrandr.
Matthias
--
Matthias Hopf
-- Michael Müller Am Montag 01 Februar 2010 schrieb Matthias Hopf:
On Jan 31, 10 19:31:55 +0100, michael wrote:
Card: http://www.club-3d.de/products/products_ending_page_7_with_id.cfm?product _id=147
this card will not work on a 1680x1050 TFT Monitor, connected via DVI, in it´s native resolution. The other resolutions (up to 1600x1200) are working fine.
So what resolution does the monitor show if it supposed to show 1680x1050?
Sorry, I forgot to say: I see only a black screen, sometimes for a very short time I see the kdm login screen. So I assume, X is running, but with wrong parameters. With your modelines: "1680x1050R": Only a black screen, after a few minutes the monitor shuts off. "1680x1050_60.00": One time I saw for a few seconds the kdm loginscreen, but the blue background was half red (red flicker). After that again the black screen. Another time I saw also black screen with the Monitor message "Schlummerbetrieb aktiviert" (Stand by). This message appears suddenly.
The driver thinks it is running the resolution just fine:
(II) RADEONHD(0): Output DVI-I_2/digital using initial mode 1680x1050 (II) RADEONHD(0): On Crtc 0 Setting 59.9 Hz Mode: Modeline "1680x1050" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync
Hm. The mode seems to be a reduced blanking mode, but that should be +hsync -vsync...
Please try the modelines
Modeline "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync Modeline "1680x1050R" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync
and use them with Modes "1680x1050R" and Modes "1680x1050_60.00"
You can also add the modes and select them dynamically with xrandr.
Matthias
I tried your modelines and some more, with different syncs etc, but the result was always the same: Black srceen with 1680x1050 at the DVI output. The monitor worked fine with a Nvidia card and the NV driver at the DVI output (same DVI cable). I tested the Monitor on an other PC witch the same card: Same problem. Tomorrow I get an other Monitor, but with the same resolution. I will test the card with this monitor. Can I try something else? Do you need more information? Do you need the Xorg.log from the nvida card? I tried some other things, look at: de.comp.os.unix.x11 Monitor 1680x1050 und ATI/AMD Grafikkarte Thanks Michael -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
participants (2)
-
Matthias Hopf
-
michael