Re: [radeonhd] Re: 0x7146:0x1545:0x2350: Visiontek ATI Radeon X1550 256MB PCI Video card
Ben Taylor writes:
On Sat, Mar 22, 2008 at 8:12 AM, Ben Taylor
wrote: On Solaris Express, build 85, this board was not recognized. A message stated:
Detected an RV515 on an unidentifiied card.
I built the latest driver out of git, and got the same error message. Ideas? It seems that most x1550's are supported, but this PCI version appears to have a PCI to PCI-Express bridge. Is that the reason radeonhd is not recognizing it?
Hi Ben, The chipset is detected. Just not the PnP ID of the card. It should work. If it doesn't please post the entire log. Cheers, Egbert. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Mon, Mar 24, 2008 at 6:35 PM, Egbert Eich
Ben Taylor writes:
On Sat, Mar 22, 2008 at 8:12 AM, Ben Taylor
wrote: On Solaris Express, build 85, this board was not recognized. A message stated:
Detected an RV515 on an unidentifiied card.
I built the latest driver out of git, and got the same error message. Ideas? It seems that most x1550's are supported, but this PCI version appears to have a PCI to PCI-Express bridge. Is that the reason radeonhd is not recognizing it?
Hi Ben,
The chipset is detected. Just not the PnP ID of the card. It should work. If it doesn't please post the entire log.
Ok. Downloaded GIT head, compiled and installed the module. Created a default xorg.conf file using /usr/X11/bin/Xorg -configure then started /usr/X11/bin/Xorg -logverbose 7 with only the DVI cable connected, and then did the same test with only the VGA cable connected. I got output on the VGA port, and did not get anything on the DVI. As an aside, I have also tried a modified version of the driver adding an entry for 0x7166 (paralleling the 0x7146 device id). When I did this, and ran Xorg -configure, it configured 3 screens, the Nvidia and both x1550 screens. I was then able to start Xorg and get a screen on the DVI port as well, but I'm suspecting that my novice attempt at adding support is probably not the right attempt. If anyone wants the xorg.conf and Xorg.0.log file, I can provides those as well. Ben -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Wed, Mar 26, 2008 at 2:07 AM, Ben Taylor
On Mon, Mar 24, 2008 at 6:35 PM, Egbert Eich
wrote: Ben Taylor writes:
On Sat, Mar 22, 2008 at 8:12 AM, Ben Taylor
wrote: On Solaris Express, build 85, this board was not recognized. A message stated:
Detected an RV515 on an unidentifiied card.
I built the latest driver out of git, and got the same error message. Ideas? It seems that most x1550's are supported, but this PCI version appears to have a PCI to PCI-Express bridge. Is that the reason radeonhd is not recognizing it?
Hi Ben,
The chipset is detected. Just not the PnP ID of the card. It should work. If it doesn't please post the entire log.
Ok. Downloaded GIT head, compiled and installed the module. Created a default xorg.conf file using /usr/X11/bin/Xorg -configure then started /usr/X11/bin/Xorg -logverbose 7 with only the DVI cable connected, and then did the same test with only the VGA cable connected. I got output on the VGA port, and did not get anything on the DVI.
As an aside, I have also tried a modified version of the driver adding an entry for 0x7166 (paralleling the 0x7146 device id). When I did this, and ran Xorg -configure, it configured 3 screens, the Nvidia and both x1550 screens. I was then able to start Xorg and get a screen on the DVI port as well, but I'm suspecting that my novice attempt at adding support is probably not the right attempt. If anyone wants the xorg.conf and Xorg.0.log file, I can provides those as well.
forgot the xorg.conf and Xorg.0.log files.... Ben
participants (2)
-
Ben Taylor
-
Egbert Eich