[hd2600pro] unknown card detected
hi there, running radeonhd driver on my hd2600pro card, i get the following in my xorg log: ====== (WW) RADEONHD(0): Unknown card detected: 0x9589:0x1462:0x0930. (WW) RADEONHD(0): A Monitor section has been specified in the config file. (WW) RADEONHD(0): Failed to set up write-combining range (0xd0000000,0x10000000) ====== here's an excerpt of lspci -v: ====== 01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD 2600 Series] (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd. Unknown device 0930 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] I/O ports at c000 [size=256] Expansion ROM at fe8c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint IRQ 0 Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- ====== driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use). keep up the good work, jérôme -- jquelin@gmail.com -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Wed, Oct 31, 2007 at 07:03:45PM +0100, Jerome Quelin wrote:
driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use).
Can you get me the PLL values for 1600x1200 dotclock? They are reported in the log when you run X with -logverbose 7. Thanks, Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On 07/10/31 19:21 +0100, Luc Verhaegen wrote:
On Wed, Oct 31, 2007 at 07:03:45PM +0100, Jerome Quelin wrote:
driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use).
Can you get me the PLL values for 1600x1200 dotclock? They are reported in the log when you run X with -logverbose 7.
don't know which one it is, therefore, providing you with: $ grep PLL Xorg.0.log (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): FUNCTION: RHDPLLsInit (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 CRTC 1: tied to PLL 1 and LUT A: (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: PLLValid (II) RADEONHD(0): FUNCTION: RHDPLLsSave (II) RADEONHD(0): FUNCTION: PLL1Save (II) RADEONHD(0): FUNCTION: PLL2Save (II) RADEONHD(0): RHDPLLSet: Setting PLL 1 to 162000kHz (II) RADEONHD(0): PLL Calculation: 162000kHz = (((0x6978 / 0x1) * 0x1E) / 0x5) (0kHz off) (II) RADEONHD(0): FUNCTION: PLL1Set (II) RADEONHD(0): FUNCTION: PLL1Calibrate (II) RADEONHD(0): PLL1Calibrate: lock in 383 loops (II) RADEONHD(0): FUNCTION: D1PLLSelect (II) RADEONHD(0): FUNCTION: RHDPLLsShutdownInactive (II) RADEONHD(0): FUNCTION: PLL2Power (II) RADEONHD(0): FUNCTION: RHDPLLsRestore (II) RADEONHD(0): FUNCTION: PLL1Restore (II) RADEONHD(0): FUNCTION: PLL1Calibrate (II) RADEONHD(0): PLL1Calibrate: lock in 383 loops (II) RADEONHD(0): FUNCTION: PLL2Restore (II) RADEONHD(0): FUNCTION: PLL2Power (this was of course @1600x1200) if you prefer, i can attach xorg.log (but i think this mailing list filters out big attachements). don't hesitate to ask anything else. jérôme -- jquelin@gmail.com -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
hello, On 07/10/31 19:03 +0100, Jerome Quelin wrote:
running radeonhd driver on my hd2600pro card, i get the following in my xorg log: ====== (WW) RADEONHD(0): Unknown card detected: 0x9589:0x1462:0x0930. (WW) RADEONHD(0): A Monitor section has been specified in the config file. (WW) RADEONHD(0): Failed to set up write-combining range (0xd0000000,0x10000000) ======
card still unknown - see attached log file.
here's an excerpt of lspci -v: ====== 01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD 2600 Series] (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd. Unknown device 0930 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] I/O ports at c000 [size=256] Expansion ROM at fe8c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint IRQ 0 Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- ======
this has (obviously) not changed. :-)
driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use).
driver still flickers at 1600x1200. jérôme -- jquelin@gmail.com
On Sat, Dec 01, 2007 at 11:38:23AM +0100, Jerome Quelin wrote:
hello,
On 07/10/31 19:03 +0100, Jerome Quelin wrote:
running radeonhd driver on my hd2600pro card, i get the following in my xorg log: ====== (WW) RADEONHD(0): Unknown card detected: 0x9589:0x1462:0x0930. (WW) RADEONHD(0): A Monitor section has been specified in the config file. (WW) RADEONHD(0): Failed to set up write-combining range (0xd0000000,0x10000000) ======
card still unknown - see attached log file.
here's an excerpt of lspci -v: ====== 01:00.0 VGA compatible controller: ATI Technologies Inc RV630 [Radeon HD 2600 Series] (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd. Unknown device 0930 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K] I/O ports at c000 [size=256] Expansion ROM at fe8c0000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Legacy Endpoint IRQ 0 Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- ======
this has (obviously) not changed. :-)
driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use).
driver still flickers at 1600x1200.
j?r?me -- jquelin@gmail.com
X.Org X Server 1.4.0 Release Date: 5 September 2007 X Protocol Version 11, Revision 0 Build Operating System: Linux_2.6.17-13mdv Mandriva Current Operating System: Linux merlin 2.6.23.1-desktop-1mdv #1 SMP Wed Oct 31 19:41:36 CET 2007 x86_64 Build Date: 28 November 2007 10:12:16AM
Before reporting problems, check http://qa.mandriva.com to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sat Dec 1 10:45:20 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) |-->Input Device "Mouse1" (**) Option "AllowMouseOpenFail" (==) Automatically adding devices (==) Automatically enabling devices (==) No FontPath specified. Using compiled-in default. (==) FontPath set to: catalogue:/etc/X11/fontpath.d (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Extension "Composite" is enabled (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x7ae080 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 2.0 X.Org XInput driver : 2.0 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 2.0 (++) using VT number 7
(II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,29c0 card 1043,8276 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,29c1 card 0000,0000 rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1a:0: chip 8086,2937 card 1043,8277 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1a:1: chip 8086,2938 card 1043,8277 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1a:2: chip 8086,2939 card 1043,8277 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1a:7: chip 8086,293c card 1043,8277 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1b:0: chip 8086,293e card 1043,829f rev 02 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,2940 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:4: chip 8086,2948 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:5: chip 8086,294a card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,2934 card 1043,8277 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2935 card 1043,8277 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,2936 card 1043,8277 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,293a card 1043,8277 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev 92 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,2918 card 1043,8277 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,2921 card 1043,8277 rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,2930 card 1043,8277 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2926 card 1043,8277 rev 02 class 01,01,85 hdr 00 (II) PCI: 01:00:0: chip 1002,9589 card 1462,0930 rev 00 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,aa08 card 1462,aa08 rev 00 class 04,03,00 hdr 80 (II) PCI: 02:00:0: chip 1969,1048 card 1043,8226 rev b0 class 02,00,00 hdr 00 (II) PCI: 03:00:0: chip 197b,2363 card 1043,824f rev 03 class 01,06,01 hdr 80 (II) PCI: 03:00:1: chip 197b,2363 card 1043,824f rev 03 class 01,01,85 hdr 00 (II) PCI: 05:03:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfe800000 - 0xfe8fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:28:0), (0,4,4), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 4 prefetchable memory range: [0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:4), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 3 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:5), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:30:0), (0,5,5), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 5 I/O range: [0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[B] (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x9589) rev 0, Mem @ 0xd0000000/28, 0xfe8e0000/16, I/O @ 0xc000/8, BIOS @ 0xfe8c0000/17 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xfebff800 - 0xfebfffff (0x800) MX[B] [1] -1 0 0xfeafe000 - 0xfeafffff (0x2000) MX[B] [2] -1 0 0xfe9c0000 - 0xfe9fffff (0x40000) MX[B] [3] -1 0 0xfe8fc000 - 0xfe8fffff (0x4000) MX[B] [4] -1 0 0xfe7ff400 - 0xfe7ff4ff (0x100) MX[B] [5] -1 0 0xfe7ff800 - 0xfe7ffbff (0x400) MX[B] [6] -1 0 0xfe7f8000 - 0xfe7fbfff (0x4000) MX[B] [7] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B] [8] -1 0 0xfe8c0000 - 0xfe8dffff (0x20000) MX[B](B) [9] -1 0 0xfe8e0000 - 0xfe8effff (0x10000) MX[B](B) [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [11] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [12] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [13] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B] [14] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [15] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B] [16] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B] [17] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [18] -1 0 0x0000a480 - 0x0000a48f (0x10) IX[B] [19] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [20] -1 0 0x0000a880 - 0x0000a887 (0x8) IX[B] [21] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B] [22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [23] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [24] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [25] -1 0 0x00009480 - 0x0000948f (0x10) IX[B] [26] -1 0 0x00009800 - 0x00009803 (0x4) IX[B] [27] -1 0 0x00009880 - 0x00009887 (0x8) IX[B] [28] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B] [29] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [30] -1 0 0x0000b480 - 0x0000b49f (0x20) IX[B] [31] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [32] -1 0 0x0000b080 - 0x0000b09f (0x20) IX[B] [33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [34] -1 0 0x0000b880 - 0x0000b89f (0x20) IX[B] [35] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xfebff800 - 0xfebfffff (0x800) MX[B] [1] -1 0 0xfeafe000 - 0xfeafffff (0x2000) MX[B] [2] -1 0 0xfe9c0000 - 0xfe9fffff (0x40000) MX[B] [3] -1 0 0xfe8fc000 - 0xfe8fffff (0x4000) MX[B] [4] -1 0 0xfe7ff400 - 0xfe7ff4ff (0x100) MX[B] [5] -1 0 0xfe7ff800 - 0xfe7ffbff (0x400) MX[B] [6] -1 0 0xfe7f8000 - 0xfe7fbfff (0x4000) MX[B] [7] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B] [8] -1 0 0xfe8c0000 - 0xfe8dffff (0x20000) MX[B](B) [9] -1 0 0xfe8e0000 - 0xfe8effff (0x10000) MX[B](B) [10] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [11] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [12] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [13] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B] [14] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [15] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B] [16] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B] [17] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [18] -1 0 0x0000a480 - 0x0000a48f (0x10) IX[B] [19] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [20] -1 0 0x0000a880 - 0x0000a887 (0x8) IX[B] [21] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B] [22] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [23] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [24] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [25] -1 0 0x00009480 - 0x0000948f (0x10) IX[B] [26] -1 0 0x00009800 - 0x00009803 (0x4) IX[B] [27] -1 0 0x00009880 - 0x00009887 (0x8) IX[B] [28] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B] [29] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [30] -1 0 0x0000b480 - 0x0000b49f (0x20) IX[B] [31] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [32] -1 0 0x0000b080 - 0x0000b09f (0x20) IX[B] [33] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [34] -1 0 0x0000b880 - 0x0000b89f (0x20) IX[B] [35] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [36] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff800 - 0xfebfffff (0x800) MX[B] [5] -1 0 0xfeafe000 - 0xfeafffff (0x2000) MX[B] [6] -1 0 0xfe9c0000 - 0xfe9fffff (0x40000) MX[B] [7] -1 0 0xfe8fc000 - 0xfe8fffff (0x4000) MX[B] [8] -1 0 0xfe7ff400 - 0xfe7ff4ff (0x100) MX[B] [9] -1 0 0xfe7ff800 - 0xfe7ffbff (0x400) MX[B] [10] -1 0 0xfe7f8000 - 0xfe7fbfff (0x4000) MX[B] [11] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B] [12] -1 0 0xfe8c0000 - 0xfe8dffff (0x20000) MX[B](B) [13] -1 0 0xfe8e0000 - 0xfe8effff (0x10000) MX[B](B) [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [18] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [19] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B] [20] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [21] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B] [22] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B] [23] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [24] -1 0 0x0000a480 - 0x0000a48f (0x10) IX[B] [25] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [26] -1 0 0x0000a880 - 0x0000a887 (0x8) IX[B] [27] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B] [28] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [29] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [30] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [31] -1 0 0x00009480 - 0x0000948f (0x10) IX[B] [32] -1 0 0x00009800 - 0x00009803 (0x4) IX[B] [33] -1 0 0x00009880 - 0x00009887 (0x8) IX[B] [34] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B] [35] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [36] -1 0 0x0000b480 - 0x0000b49f (0x20) IX[B] [37] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [38] -1 0 0x0000b080 - 0x0000b09f (0x20) IX[B] [39] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [40] -1 0 0x0000b880 - 0x0000b89f (0x20) IX[B] [41] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [42] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. (II) "glx" will be loaded. This was enabled by default and also specified in the config file. (II) "freetype" will be loaded. This was enabled by default and also specified in the config file. (II) "type1" will be loaded. This was enabled by default and also specified in the config file. (II) "record" will be loaded by default. (II) "dri" will be loaded. This was enabled by default and also specified in the config file. (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions//libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "v4l" (II) Loading /usr/lib64/xorg/modules/drivers//v4l_drv.so (II) Module v4l: vendor="X.Org Foundation" compiled for 1.4.0, module version = 0.1.1 ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions//libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension Multi-Buffering (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts//libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts//libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 1.4.0, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions//libglx.so (II) Module glx: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (==) AIGLX enabled (II) Loading extension GLX (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions//libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions//librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "radeonhd" (II) Loading /usr/lib64/xorg/modules/drivers//radeonhd_drv.so (II) Module radeonhd: vendor="AMD GPG" compiled for 1.4.0, module version = 0.0.4 Module class: X.Org Video Driver ABI class: X.Org Video Driver, version 2.0 (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input//kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.2 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input//mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 1.4.0, module version = 1.2.3 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 2.0 (II) v4l driver for Video4Linux (II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices: RV505 : Radeon X1550, X1550 64bit. RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350. RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250. R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350. RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200. RV535 : Radeon X1300, X1650. RV550 : Radeon X2300 HD. RV560 : Radeon X1650. RV570 : Radeon X1950, X1950 GT; FireGL V7400. R580 : Radeon X1900, X1950; AMD Stream Processor. R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650. RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000. RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630; FireGL V3600/V5600. M52 : Mobility Radeon X1300. M54 : Mobility Radeon X1400; M54-GL. M56 : Mobility Radeon X1600; Mobility FireGL V5200. M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200. M62 : Mobility Radeon X1350. M64 : Mobility Radeon X1450, X2300. M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250. M68 : Mobility Radeon X1900. M71 : Mobility Radeon HD 2300. M72 : Mobility Radeon HD 2400; Radeon E2400. M74 : Mobility Radeon HD 2400 XT. M76 : Mobility Radeon HD 2600; (Gemini ATI) Mobility Radeon HD 2600 XT. RS690 : Radeon X1200. RS740 : RS740, RS740M
(II) RADEONHD: version 0.0.4, built from non-git sources
(II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset RV630 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff800 - 0xfebfffff (0x800) MX[B] [5] -1 0 0xfeafe000 - 0xfeafffff (0x2000) MX[B] [6] -1 0 0xfe9c0000 - 0xfe9fffff (0x40000) MX[B] [7] -1 0 0xfe8fc000 - 0xfe8fffff (0x4000) MX[B] [8] -1 0 0xfe7ff400 - 0xfe7ff4ff (0x100) MX[B] [9] -1 0 0xfe7ff800 - 0xfe7ffbff (0x400) MX[B] [10] -1 0 0xfe7f8000 - 0xfe7fbfff (0x4000) MX[B] [11] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B] [12] -1 0 0xfe8c0000 - 0xfe8dffff (0x20000) MX[B](B) [13] -1 0 0xfe8e0000 - 0xfe8effff (0x10000) MX[B](B) [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [18] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [19] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B] [20] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [21] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B] [22] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B] [23] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [24] -1 0 0x0000a480 - 0x0000a48f (0x10) IX[B] [25] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [26] -1 0 0x0000a880 - 0x0000a887 (0x8) IX[B] [27] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B] [28] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [29] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [30] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [31] -1 0 0x00009480 - 0x0000948f (0x10) IX[B] [32] -1 0 0x00009800 - 0x00009803 (0x4) IX[B] [33] -1 0 0x00009880 - 0x00009887 (0x8) IX[B] [34] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B] [35] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [36] -1 0 0x0000b480 - 0x0000b49f (0x20) IX[B] [37] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [38] -1 0 0x0000b080 - 0x0000b09f (0x20) IX[B] [39] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [40] -1 0 0x0000b880 - 0x0000b89f (0x20) IX[B] [41] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [42] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xfebff800 - 0xfebfffff (0x800) MX[B] [5] -1 0 0xfeafe000 - 0xfeafffff (0x2000) MX[B] [6] -1 0 0xfe9c0000 - 0xfe9fffff (0x40000) MX[B] [7] -1 0 0xfe8fc000 - 0xfe8fffff (0x4000) MX[B] [8] -1 0 0xfe7ff400 - 0xfe7ff4ff (0x100) MX[B] [9] -1 0 0xfe7ff800 - 0xfe7ffbff (0x400) MX[B] [10] -1 0 0xfe7f8000 - 0xfe7fbfff (0x4000) MX[B] [11] -1 0 0xfe7ffc00 - 0xfe7fffff (0x400) MX[B] [12] -1 0 0xfe8c0000 - 0xfe8dffff (0x20000) MX[B](B) [13] -1 0 0xfe8e0000 - 0xfe8effff (0x10000) MX[B](B) [14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000ec00 - 0x0000ec7f (0x80) IX[B] [18] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[B] [19] -1 0 0x0000d480 - 0x0000d483 (0x4) IX[B] [20] -1 0 0x0000d800 - 0x0000d807 (0x8) IX[B] [21] -1 0 0x0000d880 - 0x0000d883 (0x4) IX[B] [22] -1 0 0x0000dc00 - 0x0000dc07 (0x8) IX[B] [23] -1 0 0x0000a400 - 0x0000a40f (0x10) IX[B] [24] -1 0 0x0000a480 - 0x0000a48f (0x10) IX[B] [25] -1 0 0x0000a800 - 0x0000a803 (0x4) IX[B] [26] -1 0 0x0000a880 - 0x0000a887 (0x8) IX[B] [27] -1 0 0x0000ac00 - 0x0000ac03 (0x4) IX[B] [28] -1 0 0x0000b000 - 0x0000b007 (0x8) IX[B] [29] -1 0 0x00000400 - 0x0000041f (0x20) IX[B] [30] -1 0 0x00009400 - 0x0000940f (0x10) IX[B] [31] -1 0 0x00009480 - 0x0000948f (0x10) IX[B] [32] -1 0 0x00009800 - 0x00009803 (0x4) IX[B] [33] -1 0 0x00009880 - 0x00009887 (0x8) IX[B] [34] -1 0 0x00009c00 - 0x00009c03 (0x4) IX[B] [35] -1 0 0x0000a000 - 0x0000a007 (0x8) IX[B] [36] -1 0 0x0000b480 - 0x0000b49f (0x20) IX[B] [37] -1 0 0x0000b400 - 0x0000b41f (0x20) IX[B] [38] -1 0 0x0000b080 - 0x0000b09f (0x20) IX[B] [39] -1 0 0x0000bc00 - 0x0000bc1f (0x20) IX[B] [40] -1 0 0x0000b880 - 0x0000b89f (0x20) IX[B] [41] -1 0 0x0000b800 - 0x0000b81f (0x20) IX[B] [42] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B](B) (**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (WW) RADEONHD(0): Unknown card detected: 0x9589:0x1462:0x0930. If your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Include your X log, the full name of the device and the rhd_conntest (found in utils/conntest) output. (--) RADEONHD(0): Detected an RV630 on an unidentified card (II) RADEONHD(0): Mapped IO at 0x2ade6ba72000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1462 SubsystemID: 0x0930 IOBaseAddress: 0xc000 Filename: SV25675A.BIN BIOS Bootup Message: 113-MSITV093MS.101 RV630PRO HYNIX 16MX16 256MB
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffc000 (--) RADEONHD(0): VideoRAM: 262144 kByte (II) RADEONHD(0): Framebuffer space used by Firmware (kb): 16 (II) RADEONHD(0): Start of VRAM area used by Firmware: 0xfffc000 (II) RADEONHD(0): AtomBIOS requests 16kB of VRAM scratch space (II) RADEONHD(0): AtomBIOS VRAM scratch base: 0xfffc000 (II) RADEONHD(0): Default Engine Clock: 600000 (II) RADEONHD(0): Default Memory Clock: 400000 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500 (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) Loading sub module "i2c" (II) LoadModule: "i2c"(II) Module "i2c" already built-in (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized. (II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) RADEONHD(0): Detected VGA mode. (II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0 (II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000 (II) RADEONHD(0): Maximum Pixel Clock: 400000 (II) RADEONHD(0): Reference Clock: 27000 (II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1 CRT2", RHD_DDC_1, RHD_HPD_0, { RHD_OUTPUT_TMDSA, RHD_OUTPUT_DACB } } (II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_TV, "7PIN_DIN TV1 CV", RHD_DDC_1, RHD_HPD_NONE, { RHD_OUTPUT_DACB, RHD_OUTPUT_NONE } } (II) RADEONHD(0): Connector[2] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I CRT1 DFP2", RHD_DDC_0, RHD_HPD_1, { RHD_OUTPUT_LVTMA, RHD_OUTPUT_DACA } } (--) RADEONHD(0): Attaching Output TMDS A to Connector DVI-I 1 (--) RADEONHD(0): Attaching Output DAC B to Connector DVI-I 1 (--) RADEONHD(0): Attaching Output DAC B to Connector TV 7PIN_DIN (--) RADEONHD(0): Attaching Output TMDS B to Connector DVI-I 2 (--) RADEONHD(0): Attaching Output DAC A to Connector DVI-I 2 (II) RADEONHD(0): RandR: Adding output DVI-I_1/TMDS_A (II) RADEONHD(0): RandR: Adding output DVI-I_1/DAC_B (II) RADEONHD(0): RandR: Adding output TV_7PIN_DIN/DAC_B (II) RADEONHD(0): RandR: Adding output DVI-I_2/TMDS_B (II) RADEONHD(0): RandR: Adding output DVI-I_2/DAC_A (II) RADEONHD(0): Output DVI-I_1/TMDS_A using monitor section monitor1 (II) RADEONHD(0): Output DVI-I_1/DAC_B has no monitor section (II) RADEONHD(0): Output TV_7PIN_DIN/DAC_B has no monitor section (II) RADEONHD(0): Output DVI-I_2/TMDS_B has no monitor section (II) RADEONHD(0): Output DVI-I_2/DAC_A has no monitor section (II) RADEONHD(0): I2C device "RHD I2C line 1:ddc2" registered at address 0xA0. (II) RADEONHD(0): EDID data for SyncMaster (II) RADEONHD(0): Manufacturer: SAM Model: 1ae Serial#: 1112683056 (II) RADEONHD(0): Year: 2006 Week: 41 (II) RADEONHD(0): EDID Version: 1.3 (II) RADEONHD(0): Digital Display Input (II) RADEONHD(0): Max H-Image Size [cm]: horiz.: 41 vert.: 31 (II) RADEONHD(0): Gamma: 2.20 (II) RADEONHD(0): DPMS capabilities: Off; RGB/Color Display (II) RADEONHD(0): First detailed timing is preferred mode (II) RADEONHD(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600 (II) RADEONHD(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329 (II) RADEONHD(0): Supported VESA Video Modes: (II) RADEONHD(0): 720x400@70Hz (II) RADEONHD(0): 640x480@60Hz (II) RADEONHD(0): 640x480@67Hz (II) RADEONHD(0): 640x480@72Hz (II) RADEONHD(0): 640x480@75Hz (II) RADEONHD(0): 800x600@56Hz (II) RADEONHD(0): 800x600@60Hz (II) RADEONHD(0): 800x600@72Hz (II) RADEONHD(0): 800x600@75Hz (II) RADEONHD(0): 832x624@75Hz (II) RADEONHD(0): 1024x768@60Hz (II) RADEONHD(0): 1024x768@70Hz (II) RADEONHD(0): 1024x768@75Hz (II) RADEONHD(0): 1280x1024@75Hz (II) RADEONHD(0): 1152x870@75Hz (II) RADEONHD(0): Manufacturer's mask: 0 (II) RADEONHD(0): Supported Future Video Modes: (II) RADEONHD(0): #0: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 (II) RADEONHD(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) RADEONHD(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) RADEONHD(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) RADEONHD(0): Supported additional Video Mode: (II) RADEONHD(0): clock: 162.0 MHz Image Size: 408 x 306 mm (II) RADEONHD(0): h_active: 1600 h_sync: 1664 h_sync_end 1856 h_blank_end 2160 h_border: 0 (II) RADEONHD(0): v_active: 1200 v_sync: 1201 v_sync_end 1204 v_blanking: 1250 v_border: 0 (II) RADEONHD(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 170 MHz (II) RADEONHD(0): Monitor name: SyncMaster (II) RADEONHD(0): Serial No: HSHLA03227 (II) RADEONHD(0): EDID (in hex): (II) RADEONHD(0): 00ffffffffffff004c2dae0130325242 (II) RADEONHD(0): 2910010380291f782aee95a3544c9926 (II) RADEONHD(0): 0f5054bfef80a94081808140714f0101 (II) RADEONHD(0): 010101010101483f403062b0324040c0 (II) RADEONHD(0): 130098321100001e000000fd00384b1e (II) RADEONHD(0): 5111000a202020202020000000fc0053 (II) RADEONHD(0): 796e634d61737465720a2020000000ff (II) RADEONHD(0): 004853484c4130333232370a20200011 (II) RADEONHD(0): EDID vendor "SAM", prod id 430 (II) RADEONHD(0): Using hsync ranges from config file (II) RADEONHD(0): Using vrefresh ranges from config file (II) RADEONHD(0): Printing DDC gathered Modelines:
This is what the monitor says is its preferred mode:
(II) RADEONHD(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
You should try using a mode with reduced blanking. I have no idea how that can be achieved easily with RandR. With NoRandR, it is trivial because you would just state Modes "1600x1200R" Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On 07/12/15 02:45 +0100, Luc Verhaegen wrote:
driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use).
driver still flickers at 1600x1200. [...]
This is what the monitor says is its preferred mode:
(II) RADEONHD(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
indeed, my screen's native resolution is 1600x1200 (and i would prefer sticking with this resolution!)
You should try using a mode with reduced blanking. I have no idea how that can be achieved easily with RandR. With NoRandR, it is trivial because you would just state Modes "1600x1200R"
xrandr --output DVI-I_1/digital --mode 1280x1024 works ok to change my resolution... but once again, i'd prefer having a non-flickering 1600x1200... do you know why it happens? if you need some more information from me, don't hesitate... thanks, jerome -- jquelin@gmail.com -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Sat, Dec 15, 2007 at 10:25:17AM +0100, Jerome Quelin wrote:
On 07/12/15 02:45 +0100, Luc Verhaegen wrote:
driver works fine at 1280x1024. i get some working display at 1600x1200, but screen flickers from time to time, which is annoying - therefore i went back to 1280x1024 (using radeonhd for day to day use).
driver still flickers at 1600x1200. [...]
This is what the monitor says is its preferred mode:
(II) RADEONHD(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
indeed, my screen's native resolution is 1600x1200 (and i would prefer sticking with this resolution!)
You should try using a mode with reduced blanking. I have no idea how that can be achieved easily with RandR. With NoRandR, it is trivial because you would just state Modes "1600x1200R"
xrandr --output DVI-I_1/digital --mode 1280x1024 works ok to change my resolution...
but once again, i'd prefer having a non-flickering 1600x1200... do you know why it happens? if you need some more information from me, don't hesitate...
thanks, jerome
This is not what reduced blanking means. 1600x1200 with normal cvt: # 1600x1200 59.87 Hz (CVT 1.92M3) hsync: 74.54 kHz; pclk: 161.00 MHz Modeline "1600x1200_60.00" 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync 1600x1200 with cvt -r: # 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync Notice how the bandwidth/dotclock went down from 161MHz to a much more acceptable 130.25 MHz. When you choose this reduced blanking mode, your monitor will be a lot happier, this while displaying the same image at roughly the same timing. Thanks, Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Dec 15, 07 02:45:40 +0100, Luc Verhaegen wrote:
(II) RADEONHD(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz) You should try using a mode with reduced blanking. I have no idea how
This is what the monitor says is its preferred mode: that can be achieved easily with RandR. With NoRandR, it is trivial because you would just state Modes "1600x1200R"
Option "ForceReduced" might be enough. But testing this in noRandr mode
sounds like this is less work.
Matthias
--
Matthias Hopf
On 07/12/17 23:12 +0100, Luc Verhaegen wrote:
You should try using a mode with reduced blanking. I have no idea how that can be achieved easily with RandR. With NoRandR, it is trivial because you would just state Modes "1600x1200R"
xrandr --output DVI-I_1/digital --mode 1280x1024 works ok to change my resolution...
but once again, i'd prefer having a non-flickering 1600x1200... do you know why it happens? if you need some more information from me, don't hesitate...
This is not what reduced blanking means.
oh, sorry. i don't know that much of x stuff.
1600x1200 with normal cvt:
# 1600x1200 59.87 Hz (CVT 1.92M3) hsync: 74.54 kHz; pclk: 161.00 MHz Modeline "1600x1200_60.00" 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync
1600x1200 with cvt -r:
# 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync
Notice how the bandwidth/dotclock went down from 161MHz to a much more acceptable 130.25 MHz.
When you choose this reduced blanking mode, your monitor will be a lot happier, this while displaying the same image at roughly the same timing.
ok. i tried cvt -r 1600 1200 which indeeds reduces to 130MHz: $ cvt -r 1600 1200 # 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync however, the flickering still happens... maybe less intensly, but still very incomfortable to use. :-( any other idea? (going back to 1280x1024) thanks, jérôme -- jquelin@gmail.com -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Dec 18, 07 18:21:22 +0100, Jerome Quelin wrote:
ok. i tried cvt -r 1600 1200 which indeeds reduces to 130MHz: $ cvt -r 1600 1200 # 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync
however, the flickering still happens... maybe less intensly, but still very incomfortable to use. :-(
You can try different syncs (swap + and - with hsync/vsync, try both +,
both -).
Matthias
--
Matthias Hopf
On 18 12 2007 18:21:22 Jerome Quelin wrote:
On 07/12/17 23:12 +0100, Luc Verhaegen wrote:
You should try using a mode with reduced blanking. I have no idea how that can be achieved easily with RandR. With NoRandR, it is trivial because you would just state Modes "1600x1200R"
xrandr --output DVI-I_1/digital --mode 1280x1024 works ok to change my resolution...
but once again, i'd prefer having a non-flickering 1600x1200... do you know why it happens? if you need some more information from me, don't hesitate...
This is not what reduced blanking means.
oh, sorry. i don't know that much of x stuff.
1600x1200 with normal cvt:
# 1600x1200 59.87 Hz (CVT 1.92M3) hsync: 74.54 kHz; pclk: 161.00 MHz Modeline "1600x1200_60.00" 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync
1600x1200 with cvt -r:
# 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync
Notice how the bandwidth/dotclock went down from 161MHz to a much more acceptable 130.25 MHz.
When you choose this reduced blanking mode, your monitor will be a lot happier, this while displaying the same image at roughly the same timing.
ok. i tried cvt -r 1600 1200 which indeeds reduces to 130MHz: $ cvt -r 1600 1200 # 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync
however, the flickering still happens... maybe less intensly, but still very incomfortable to use. :-(
any other idea? (going back to 1280x1024)
Not sure what your problem really is, but reduced blanking can be used (and should be used) only with LCDs not CRTs. As you say that you see flickering I deduce you have a CRT so you should use higher refresh rate, I'd recommend 70Hz for a smaller screens (<19") and 75 for bigger ones. $ cvt 1600 1200 70 # 1600x1200 69.92 Hz (CVT) hsync: 87.55 kHz; pclk: 190.50 MHz Modeline "1600x1200_70.00" 190.50 1600 1720 1888 2176 1200 1203 1207 1252 -hsync +vsync $ cvt 1600 1200 75 # 1600x1200 74.98 Hz (CVT 1.92M3) hsync: 94.09 kHz; pclk: 204.75 MHz Modeline "1600x1200_75.00" 204.75 1600 1720 1888 2176 1200 1203 1207 1255 -hsync +vsync
thanks, jérôme -- jquelin@gmail.com
hope it helps hubert -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Tue, Dec 18, 2007 at 06:21:22PM +0100, Jerome Quelin wrote:
ok. i tried cvt -r 1600 1200 which indeeds reduces to 130MHz: $ cvt -r 1600 1200 # 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync
however, the flickering still happens... maybe less intensly, but still very incomfortable to use. :-(
any other idea? (going back to 1280x1024)
thanks, j?r?me
Please provide a log with this, preferably -logverbose 7. Thanks, Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On 07/12/18 22:13 +0100, Luc Verhaegen wrote:
On Tue, Dec 18, 2007 at 06:21:22PM +0100, Jerome Quelin wrote:
ok. i tried cvt -r 1600 1200 which indeeds reduces to 130MHz: $ cvt -r 1600 1200 # 1600x1200 59.92 Hz (CVT 1.92M3-R) hsync: 74.01 kHz; pclk: 130.25 MHz Modeline "1600x1200R" 130.25 1600 1648 1680 1760 1200 1203 1207 1235 +hsync -vsync
however, the flickering still happens... maybe less intensly, but still very incomfortable to use. :-(
Please provide a log with this, preferably -logverbose 7.
maybe "flickering" is not the correct term. (sorry, i'm neither a native english speaker nor an X developer) what i'm experiencing is: - the screen goes blank during 1 second (or less, or more) then resume - it generally happens after some time (around 1 hour) - once it begins to happen, killing X and restarting X doesn't quiet the problem for 1 hour: problem re-happens almost instantaneous - opening a fullscreen application with a lot of white in the window (think firefox with google's homepage) seems to trigger it more easily - changing virtual desktop to something else seems to quiet it a bit - returning to offending virtual desktop re-triggers it - sometimes, i have the blank screen triggered, then X seems to have sync back but the blank screen returns. it can last for more than 30 seconds if i don't change what's displayed (eg by changing virtual desktop) - it only happens when 1600x1200, using xrandr to change resolution puts an end to it immediately - cvt -r 1600 1200 doesn't seem to help you'll find attached: - Xorg.0.log with logverbose 7 (X killed by ctrl+alt+space when problem has been experienced) - X's stderr (which is not empty) - my xorg.conf if that's of any help thanks for your help, jérôme -- jquelin@gmail.com
participants (4)
-
Hubert Kario -
Jerome Quelin -
Luc Verhaegen -
Matthias Hopf