Modeline not useful in dual monitor?
I have plugged in a second monitor through VGA to my laptop with radeonhd 3650. Everything works fine but the image is shifted on the external display (it is normal because on the previous computer it was also shifted so I fixed it by adjusting modeline in monitor section) Hovewer modeline in dual monitor Modeline desn't work at all. xvidtune says that it cannot test the modeline because it is out of frequency (maybe it takes parameters from laptop panel?). My xorg: Section "Files" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi/:unscaled" #FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/75dpi" EndSection Section "Module" Load "dri" Load "dri2" Load "drm" Load "extmod" Load "dbe" Load "freetype" Load "glx" Load "int10" EndSection Section "ServerFlags" Option "AutoAddDevices" "False" Option "AIGLX" "On" Option "DontZap" "False" EndSection Section "Extensions" Option "Composite" "On" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbLayout" "pl, hu, ru" Option "XKbVariant" ",qwerty," Option "XKbOptions" "grp:lctrl_lshift_toggle" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "false" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection Section "InputDevice" Identifier "stylus" Driver "wacom" Option "Type" "stylus" Option "Device" "/dev/input/wacom" Option "USB" "on" Option "KeepShape" "off" Option "Mode" "Absolute" Option "Vendor" "WACOM" Option "Threshold" "5" EndSection Section "InputDevice" Identifier "eraser" Driver "wacom" Option "Type" "eraser" Option "Device" "/dev/input/wacom" Option "KeepShape" "off" Option "USB" "on" Option "Mode" "Absolute" Option "Vendor" "WACOM" Option "Threshold" "5" EndSection Section "InputDevice" Identifier "cursor" Driver "wacom" Option "Type" "cursor" Option "Device" "/dev/input/wacom" Option "KeepShape" "off" Option "USB" "on" Option "Mode" "Absolute" Option "Vendor" "WACOM" Option "Threshold" "5" EndSection Section "Device" Identifier "ATIRADEON3650" Driver "radeonhd" Option "XAANoOffscreenPixmaps" "true" Option "AccelMethod" "exa" Option "monitor-VGA_1" "Gener" Option "monitor-PANEL" "Panel" Option "RROutputOrder" "Gener" Option "DRI" "On" EndSection Section "Monitor" Identifier "Gener" Option "DPMS" EndSection Section "Monitor" Identifier "Exter" Modeline "1280x1024_60.00" 108.88 1280 1312 1424 1688 1024 1025 1028 1066 +HSync +VSync Option "RightOf" "Gener" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "ATIRADEON3650" DefaultDepth 24 SubSection "Display" Depth 16 Modes "1400x900" EndSubSection SubSection "Display" Depth 24 Modes "1400x900" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Synaptics Touchpad" InputDevice "cursor" "SendCoreEvents" InputDevice "stylus" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" EndSection Section "DRI" Group "video" Mode 0666 EndSection ---------------------------------------------------- Szukasz noclegu, kwatery, kolonii, obozu, wyprawy, spa.... Już jest, największa baza ogłoszeń turystycznych, sprawdź! Kliknij: http://klik.wp.pl/?adr=http%3A%2F%2Fcorto.www.wp.pl%2Fas%2Fotowakacje.html&sid=807 -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
?????? ????? ?????, chemaniak@wp.pl. ?? ?????? 25.07.2009 12:10
I have plugged in a second monitor through VGA to my laptop with radeonhd 3650. Everything works fine but the image is shifted on the external display (it is normal because on the previous computer it was also shifted so I fixed it by adjusting modeline in monitor section) Hovewer modeline in dual monitor Modeline desn't work at all. xvidtune says that it cannot test the modeline because it is out of frequency (maybe it takes parameters from laptop panel?).
try xrandr --help or it works only for tv-out -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
participants (2)
-
chemaniak@wp.pl
-
John Doe