The driver claims to support the V3600, and it 0x958D is listed amongst the IDs, but it is not being recognized: (==) RADEONHD(0): Depth 24, (--) framebuffer bpp 32 (II) RADEONHD(0): Unknown card detected: 0x958D:0x1002:0x0B02. If your card does not work or does not work optimally please contact radeonhd@opensuse.org to help rectify this. Use the subject: 0x958D:0x1002:0x0B02: <name of board>. (--) RADEONHD(0): Detected an RV630 on an unidentified card (==) RADEONHD(0): Write-combining range (0xfdce0000,0x10000) was already clear (II) RADEONHD(0): Mapped IO at 0x8006b4000 (size 0x00010000) (II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location (II) RADEONHD(0): ATOM BIOS Rom: SubsystemVendorID: 0x1002 SubsystemID: 0x0b02 IOBaseAddress: 0xae00 Filename: S3B14903.100 BIOS Bootup Message: 113-B14903-100 FGL RV630 GDDR2_16Mx16 128bit 256MB 600e/500m Any help would be much appreciated. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Mon, Dec 03, 2007 at 04:48:45PM -0800, Kip Macy wrote:
The driver claims to support the V3600, and it 0x958D is listed amongst the IDs, but it is not being recognized:
Any help would be much appreciated.
Hi Kip, Are you just reporting a board id, or are you running into a problem that makes our driver unusable for you on your hardware? Thanks, Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Dec 5, 2007 3:55 PM, Luc Verhaegen
On Mon, Dec 03, 2007 at 04:48:45PM -0800, Kip Macy wrote:
The driver claims to support the V3600, and it 0x958D is listed amongst the IDs, but it is not being recognized:
Any help would be much appreciated.
Hi Kip,
Are you just reporting a board id, or are you running into a problem that makes our driver unusable for you on your hardware?
Adding the board id made it work for my wfp2407 (single-link), but the code then failed to work properly on my SyncMaster 305T (double-link). "2560x1600" got filtered from the modes because it complained that the clock was too high. Thanks. -Kip
Thanks,
Luc Verhaegen. SUSE/Novell X Driver Developer.
-- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
On Wed, Dec 05, 2007 at 03:58:04PM -0800, Kip Macy wrote:
Adding the board id made it work for my wfp2407 (single-link), but the code then failed to work properly on my SyncMaster 305T (double-link). "2560x1600" got filtered from the modes because it complained that the clock was too high.
Thanks.
Double link requires appropriate handling which i haven't looked into yet. Mainly mode validation and flicking a bit in the digital blocks. I should have a way to test this real soon though. Thanks, Luc Verhaegen. SUSE/Novell X Driver Developer. -- To unsubscribe, e-mail: radeonhd+unsubscribe@opensuse.org For additional commands, e-mail: radeonhd+help@opensuse.org
participants (2)
-
Kip Macy
-
Luc Verhaegen