5 Jun
2014
5 Jun
'14
14:06
Hello,
i have installed openSuSE 13.1 on a IBM Power7 LPAR.
The Problem is that the bootloader can not installed.
I installed the openSuSE on LVM (with multipath).
Yaboot (ybin) ist not available.
Is it possible to get it work with grub2 ?
Or is there another bootloader to boot ?
# grub2-install
Path `/boot/grub2' is not readable by GRUB on boot. Installation is impossible.
Aborting.
# grub2-mkconfig -o /boot/grub2/grub.cfg
#vgdisplay
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 9.80 GiB
PE Size 4.00 MiB
Total PE 2508
Alloc PE / Size 2507 / 9.79 GiB
Free PE / Size 1 / 4.00 MiB
VG UUID 31SQqL-xam3-eVXS-k7z4-7QCr-EPvG-FjUomq
# lvdisplay
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Logical volume ---
LV Path /dev/system/home
LV Name home
VG Name system
LV UUID 3162uV-PvOa-O1el-0Oan-tWjm-nHiw-fvGqW3
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.79 GiB
Current LE 715
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/root
LV Name root
VG Name system
LV UUID 0e1yxZ-kqLq-3dUV-fU7D-UhDy-6AhB-duqOIF
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 5.00 GiB
Current LE 1280
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/swap
LV Name swap
VG Name system
LV UUID qCA7TJ-cMAf-EDOu-vHbK-vuk4-TGNk-ttsDIW
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.00 GiB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors auto
Dennis
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
5 Jun
5 Jun
14:47
Hi,
On Thu, Jun 5, 2014 at 9:06 AM, Schneck Dennis CIS SDE
<Dennis.Schneck(a)heller.biz> wrote:
Hello,
i have installed openSuSE 13.1 on a IBM Power7 LPAR.
The Problem is that the bootloader can not installed.
I installed the openSuSE on LVM (with multipath).
Yaboot (ybin) ist not available.
We have yaboot wrapped by lilo script. (lilo
package)
Is it possible to get it work with grub2 ?
Or is there another bootloader to boot ?
# grub2-install
You shouls specify PReP partition to install to. Like grub2-install
/dev/sda1
Path `/boot/grub2' is not readable by GRUB on
boot. Installation is impossible. Aborting.
# grub2-mkconfig -o /boot/grub2/grub.cfg
#vgdisplay
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 9.80 GiB
PE Size 4.00 MiB
Total PE 2508
Alloc PE / Size 2507 / 9.79 GiB
Free PE / Size 1 / 4.00 MiB
VG UUID 31SQqL-xam3-eVXS-k7z4-7QCr-EPvG-FjUomq
# lvdisplay
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Logical volume ---
LV Path /dev/system/home
LV Name home
VG Name system
LV UUID 3162uV-PvOa-O1el-0Oan-tWjm-nHiw-fvGqW3
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.79 GiB
Current LE 715
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/root
LV Name root
VG Name system
LV UUID 0e1yxZ-kqLq-3dUV-fU7D-UhDy-6AhB-duqOIF
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 5.00 GiB
Current LE 1280
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/swap
LV Name swap
VG Name system
LV UUID qCA7TJ-cMAf-EDOu-vHbK-vuk4-TGNk-ttsDIW
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.00 GiB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors auto
Dennis
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
14:53
New subject: AW: [opensuse-ppc] Bootloader problem on IBM Power7 LPAR
Hi Dinar,
# grub2-install
You shouls specify PReP partition to install to. Like grub2-install /dev/sda1
Disk /dev/sda: 10.7 GB, 10737418240 bytes, 20971520 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0xbb8c0900
Device Boot Start End Blocks Id System
/dev/sda1 2048 417791 207872 41 PPC PReP Boot
/dev/sda2 417792 20971519 10276864 8e Linux LVM
Rescue:/etc/sysconfig # grub2-install /dev/sda1
Path `/boot/grub2' is not readable by GRUB on boot. Installation is impossible.
Aborting.
Thanks
Dennis
-----Ursprüngliche Nachricht-----
Von: dinarv(a)gmail.com [mailto:dinarv@gmail.com] Im Auftrag von Dinar Valeev
Gesendet: Donnerstag, 5. Juni 2014 09:48
An: opensuse-ppc(a)opensuse.org
Betreff: Re: [opensuse-ppc] Bootloader problem on IBM Power7 LPAR
Hi,
On Thu, Jun 5, 2014 at 9:06 AM, Schneck Dennis CIS SDE <Dennis.Schneck(a)heller.biz>
wrote:
Hello,
i have installed openSuSE 13.1 on a IBM Power7 LPAR.
The Problem is that the bootloader can not installed.
I installed the openSuSE on LVM (with multipath).
Yaboot (ybin) ist not available.
We have yaboot wrapped by lilo script. (lilo package)
> Is it possible to get it work with grub2 ?
> Or is there another bootloader to boot ?
>
# grub2-install
You shouls specify PReP partition to install to. Like grub2-install /dev/sda1
Path `/boot/grub2' is not readable by GRUB on
boot. Installation is impossible. Aborting.
# grub2-mkconfig -o /boot/grub2/grub.cfg
#vgdisplay
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 9.80 GiB
PE Size 4.00 MiB
Total PE 2508
Alloc PE / Size 2507 / 9.79 GiB
Free PE / Size 1 / 4.00 MiB
VG UUID 31SQqL-xam3-eVXS-k7z4-7QCr-EPvG-FjUomq
# lvdisplay
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Logical volume ---
LV Path /dev/system/home
LV Name home
VG Name system
LV UUID 3162uV-PvOa-O1el-0Oan-tWjm-nHiw-fvGqW3
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.79 GiB
Current LE 715
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/root
LV Name root
VG Name system
LV UUID 0e1yxZ-kqLq-3dUV-fU7D-UhDy-6AhB-duqOIF
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 5.00 GiB
Current LE 1280
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/swap
LV Name swap
VG Name system
LV UUID qCA7TJ-cMAf-EDOu-vHbK-vuk4-TGNk-ttsDIW
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.00 GiB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors auto
Dennis
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
N�����r��y隊Z)z{.��is맲��r��z�^�ˬz��N�(�֜��^� ޭ隊Z)z{.��is�0�����Ǩ�
17:37
New subject: AW: [opensuse-ppc] Bootloader problem on IBM Power7 LPAR
Hi,
i made a new install without LVM.
grub2-mkconfig -o /boot/grub2/grub.conf
grub2-install --force --recheck --no-nvram /dev/sda1
170+1 records in
170+1 records out
Installation finished. No error reported.
But now:
PReP-BOOT : Unable to load full PReP image.
Loaded bf8000 out of cb00000 bytes.
.----------------------------------.
| No Operating Systems Installed |
`----------------------------------'
-----Ursprüngliche Nachricht-----
Von: dinarv(a)gmail.com [mailto:dinarv@gmail.com] Im Auftrag von Dinar Valeev
Gesendet: Donnerstag, 5. Juni 2014 09:48
An: opensuse-ppc(a)opensuse.org
Betreff: Re: [opensuse-ppc] Bootloader problem on IBM Power7 LPAR
Hi,
On Thu, Jun 5, 2014 at 9:06 AM, Schneck Dennis CIS SDE
<Dennis.Schneck(a)heller.biz> wrote:
Hello,
i have installed openSuSE 13.1 on a IBM Power7 LPAR.
The Problem is that the bootloader can not installed.
I installed the openSuSE on LVM (with multipath).
Yaboot (ybin) ist not available.
We have yaboot wrapped by lilo script. (lilo package)
Is it possible to get it work with grub2 ?
Or is there another bootloader to boot ?
# grub2-install
You shouls specify PReP partition to install to. Like grub2-install /dev/sda1
Path `/boot/grub2' is not readable by GRUB on
boot. Installation is impossible. Aborting.
# grub2-mkconfig -o /boot/grub2/grub.cfg
#vgdisplay
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 9.80 GiB
PE Size 4.00 MiB
Total PE 2508
Alloc PE / Size 2507 / 9.79 GiB
Free PE / Size 1 / 4.00 MiB
VG UUID 31SQqL-xam3-eVXS-k7z4-7QCr-EPvG-FjUomq
# lvdisplay
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Logical volume ---
LV Path /dev/system/home
LV Name home
VG Name system
LV UUID 3162uV-PvOa-O1el-0Oan-tWjm-nHiw-fvGqW3
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.79 GiB
Current LE 715
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/root
LV Name root
VG Name system
LV UUID 0e1yxZ-kqLq-3dUV-fU7D-UhDy-6AhB-duqOIF
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 5.00 GiB
Current LE 1280
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/swap
LV Name swap
VG Name system
LV UUID qCA7TJ-cMAf-EDOu-vHbK-vuk4-TGNk-ttsDIW
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.00 GiB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors auto
Dennis
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
17:40
On Thu, Jun 5, 2014 at 12:37 PM, Schneck Dennis CIS SDE
<Dennis.Schneck(a)heller.biz> wrote:
Hi,
i made a new install without LVM.
grub2-mkconfig -o /boot/grub2/grub.conf
grub2-install --force --recheck --no-nvram /dev/sda1
170+1 records in
170+1 records out
Installation finished. No error reported.
But now:
PReP-BOOT : Unable to load full PReP image.
Loaded bf8000 out of cb00000 bytes.
.----------------------------------.
| No Operating Systems Installed |
`----------------------------------'
It seems your PReP partition is quite big.
parted /dev/sda resize 1 8M
grub2-install /dev/sda1
-----Ursprüngliche Nachricht-----
Von: dinarv(a)gmail.com [mailto:dinarv@gmail.com] Im Auftrag von Dinar Valeev
Gesendet: Donnerstag, 5. Juni 2014 09:48
An: opensuse-ppc(a)opensuse.org
Betreff: Re: [opensuse-ppc] Bootloader problem on IBM Power7 LPAR
Hi,
On Thu, Jun 5, 2014 at 9:06 AM, Schneck Dennis CIS SDE
<Dennis.Schneck(a)heller.biz> wrote:
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
Hello,
i have installed openSuSE 13.1 on a IBM Power7 LPAR.
The Problem is that the bootloader can not installed.
I installed the openSuSE on LVM (with multipath).
Yaboot (ybin) ist not available.
We have yaboot wrapped by lilo script. (lilo
package)
Is it possible to get it work with grub2 ?
Or is there another bootloader to boot ?
# grub2-install
You shouls specify PReP partition to install to. Like
grub2-install /dev/sda1
Path `/boot/grub2' is not readable by GRUB
on boot. Installation is impossible. Aborting.
# grub2-mkconfig -o /boot/grub2/grub.cfg
#vgdisplay
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Volume group ---
VG Name system
System ID
Format lvm2
Metadata Areas 1
Metadata Sequence No 4
VG Access read/write
VG Status resizable
MAX LV 0
Cur LV 3
Open LV 0
Max PV 0
Cur PV 1
Act PV 1
VG Size 9.80 GiB
PE Size 4.00 MiB
Total PE 2508
Alloc PE / Size 2507 / 9.79 GiB
Free PE / Size 1 / 4.00 MiB
VG UUID 31SQqL-xam3-eVXS-k7z4-7QCr-EPvG-FjUomq
# lvdisplay
/dev/mapper/control: mknod failed: No such file or directory
Failure to communicate with kernel device-mapper driver.
Check that device-mapper is available in the kernel.
Found duplicate PV tW1RfVfr0u3qt1daYZdTrMbzYP5um143: using /dev/sdb2 not /dev/sda2
--- Logical volume ---
LV Path /dev/system/home
LV Name home
VG Name system
LV UUID 3162uV-PvOa-O1el-0Oan-tWjm-nHiw-fvGqW3
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.79 GiB
Current LE 715
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/root
LV Name root
VG Name system
LV UUID 0e1yxZ-kqLq-3dUV-fU7D-UhDy-6AhB-duqOIF
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 5.00 GiB
Current LE 1280
Segments 1
Allocation inherit
Read ahead sectors auto
--- Logical volume ---
LV Path /dev/system/swap
LV Name swap
VG Name system
LV UUID qCA7TJ-cMAf-EDOu-vHbK-vuk4-TGNk-ttsDIW
LV Write Access read/write
LV Creation host, time 10.1.7.154, 2014-06-05 08:16:35 +0200
LV Status NOT available
LV Size 2.00 GiB
Current LE 512
Segments 1
Allocation inherit
Read ahead sectors auto
Dennis
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
--
To unsubscribe, e-mail: opensuse-ppc+unsubscribe(a)opensuse.org
To contact the owner, e-mail: opensuse-ppc+owner(a)opensuse.org
2502
days inactive
2502
days old
4 comments
2 participants
participants (2)
-
Dinar Valeev -
Schneck Dennis CIS SDE