Ok....Let´s supose that your boot setings are ok. Another try is make sure that the Kernel Image are instaled and activated... Boot from CD, and choose YAST to boot the instaled packages, should work, then follow the steps above: Basicaly you need 3 Partitions: /dev/sda1 Boot /dev/sda2 swap /dev/sda3 Root You can check this with fdisk /dev/sda then you have to put the Kernel on /dev/sda1 with dd if=/boot/zImage.prep of=/dev/sda1 then you must activate the Boot Partition with either: /sbin/activate /dev/sda 1 or with fdisk then it should boot from the HD. With regards, Marcus Aureliano. -----Original Message----- From: David Callaghan [mailto:dcallaghan@mail.orbtech.tv] Sent: quinta-feira, 29 de novembro de 2001 14:47 To: suse-ppc@suse.com Subject: RE: [suse-ppc] RS/6K can't start after halt Marcus Aureliano wrote:

I had the same problem once, and after many tries I discovered that my SMS was an old version. You should ask IBM for the lastest version of SMS. Which RS/6K do you have? I have a B50 which I bought about 6 weeks ago.