Hi list I am installing SLES on my pseries 620 and it works fine with both version (sles9-sp2 and sles8-sp3a) but I cannot see my disk arrays, I think that I need the apropiate driver for my raid card: PCI 4-Channel Ultra3 SCSI RAID Adapter, I can not find information about this driver for linux ppc... someone had have any similar experience? Another question, can I install Linux LPAR on this machine? I am thinking on this solution too.. Any advice please... thanks in advance Here my HW information and some information files: Pseries 620 (7025-6f1) 2-Way - RS64 IV 600 Mz 4MB L2 cache 02 internal disks scsi 01 PCI 4-Channel Ultra3 SCSI RAID Adapter with 5 scsi disks Tomas Carmen R. SINUX S.A.C. http://www.sinux.com.pe
On Fri, Dec 16, Tomas Carmen - SINUX S.A.C. wrote:
01 PCI 4-Channel Ultra3 SCSI RAID Adapter with 5 scsi disks
Can you paste the lspci -n output? Boot into the rescue system if you cant get it installed. -- short story of a lazy sysadmin: alias appserv=wotan
Here is my lspci, my attach aparently are filtered in this maillist Thanks in advance 0000:00:0b.0 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:0b.2 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:0b.4 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:0b.6 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:10.0 ISA bridge: Symphony Labs W83C553 (rev 10) 0000:00:11.0 Co-processor: IBM: Unknown device 00e0 (rev 01) 0000:01:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) 0000:01:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) 0001:10:0b.0 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0b.2 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0b.4 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0b.6 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.0 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.2 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.4 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.6 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:11:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26) 0001:17:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) 0001:1d:01.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 (rev 01) 0001:2a:01.0 RAID bus controller: IBM SCSI RAID Adapter [ServeRAID] (rev 10) Tomas Carmen R. SINUX S.A.C. http://www.sinux.com.pe -----Mensaje original----- De: Olaf Hering [mailto:olh@suse.de] Enviado el: Viernes, 16 de Diciembre de 2005 12:46 p.m. Para: Tomas Carmen - SINUX S.A.C. CC: suse-ppc@suse.com Asunto: Re: [suse-ppc] problem sles p620 with Ultra3 scsi raid On Fri, Dec 16, Tomas Carmen - SINUX S.A.C. wrote:
01 PCI 4-Channel Ultra3 SCSI RAID Adapter with 5 scsi disks
Can you paste the lspci -n output? Boot into the rescue system if you cant get it installed. -- short story of a lazy sysadmin: alias appserv=wotan
floppy.1: get nvram floppy.2: klog info sys.1: cpu misc.9: kernel log ----- kernel log ----- <6>firmware_features = 0x0 <4>Starting Linux PPC64 2.6.5-7.97-pseries64 <4>----------------------------------------------------- <4>naca = 0xc000000000004000 <4>naca->pftSize = 0x1a <4>naca->debug_switch = 0x0 <4>naca->interrupt_controller = 0x2 <4>systemcfg = 0xc000000000005000 <4>systemcfg->processorCount = 0x2 <4>systemcfg->physicalMemorySize = 0xc0000000 <4>systemcfg->dCacheL1LineSize = 0x80 <4>systemcfg->iCacheL1LineSize = 0x80 <4>htab_data.htab = 0xc0000000b8000000 <4>htab_data.num_ptegs = 0x80000 <4>----------------------------------------------------- <4>[boot]0100 MM Init <4>[boot]0100 MM Init Done <4>idle = default_idle <4>Linux version 2.6.5-7.97-pseries64 (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Fri Jul 2 14:21:59 UTC 2004 <4>[boot]0012 Setup Arch <3>WARNING: could not find NUMA associativity reference point <6>NUMA associativity depth for CPU/Memory: -1 <6>Top of RAM: 0xc0000000, Total RAM: 0xc0000000 <6>Memory hole size: 0MB <6>cpu 0 maps to domain 0 <6>cpu 1 maps to domain 0 <6>node 0 <6>start_paddr = 0 <6>end_paddr = c0000000 <6>bootmap_pages = 18 <6>bootmap_paddr = bffe6000 <6>free_bootmem 0 c0000000 <6>reserve_bootmem 0 949598 <6>reserve_bootmem 2800000 14c000 <6>reserve_bootmem fc00000 400000 <6>reserve_bootmem 3ff49000 b7000 <6>reserve_bootmem b8000000 4000000 <6>reserve_bootmem bf000000 400000 <6>reserve_bootmem bf800000 400000 <6>reserve_bootmem bffe6000 18000 <6>reserve_bootmem bfffe7b0 1850 <4>Boot arguments: root=/dev/sda3 selinux=0 elevator=cfq <4>EEH: disabled PCI Enhanced I/O Error Handling <6>PPC64 nvram contains 262144 bytes .... <6>Using unsupported 1024x768 MTRX,G200 at d8000000, depth=8, pitch=1024 <6>fb1: Open Firmware frame buffer device on /pci@fff7f0a000/pci@b,6/display@1 <6>Requesting EPOW irq 81, 97, 65, 81 <6>CPU does not support HugeTLB <3>RTAS daemon started <5>VFS: Disk quotas dquot_6.5.1 <6>Initializing Cryptographic API <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 <6>rpaphp: Slot [0000:00:0b.2](PCI location=P1-I5) registered <6>rpaphp: Slot [0000:00:0b.4](PCI location=P1-I4) registered <6>rpaphp: Slot [0000:00:0b.6](PCI location=P1-I3) registered <6>rpaphp: Slot [0001:10:0b.2](PCI location=P1-I8) registered <6>rpaphp: Slot [0001:10:0b.4](PCI location=P1-I7) registered <6>rpaphp: Slot [0001:10:0b.6](PCI location=P1-I6) registered <6>rpaphp: Slot [0001:10:0c.0](PCI location=P1-I12) registered <6>rpaphp: Slot [0001:10:0c.2](PCI location=P1-I11) registered <6>rpaphp: Slot [0001:10:0c.4](PCI location=P1-I10) registered <6>rpaphp: Slot [0001:10:0c.6](PCI location=P1-I9) registered <4>Console: switching to colour frame buffer device 80x30 <4>no virtual consoles found <6>HVSI: registered 0 devices <6>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled <4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A <4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A <4>ttyS2 at I/O 0x890 (irq = 15) is a 16550A <4>ttyS3 at I/O 0x898 (irq = 14) is a 16550A <4>Using cfq io scheduler <6>Floppy drive(s): fd0 is 2.88M <6>FDC 0 is a National Semiconductor PC87306 <4>RAMDISK driver initialized: 16 RAM disks of 123456K size 1024 blocksize <6>loop: loaded (max 8 devices) <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <6>mice: PS/2 mouse device common for all mice <6>serio: i8042 AUX port at 0x60,0x64 irq 12 <6>input: PS/2 Logitech Mouse on isa0060/serio1 <6>serio: i8042 KBD port at 0x60,0x64 irq 1 <6>input: AT Raw Set 2 keyboard on isa0060/serio0 <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>oprofile: using ppc64/rs64 performance monitoring. <6>NET: Registered protocol family 2 <6>IP: routing cache hash table of 16384 buckets, 256Kbytes <6>TCP: Hash tables configured (established 524288 bind 65536) <6>NET: Registered protocol family 1 <6>NET: Registered protocol family 17 <6>NET: Registered protocol family 15 <4>Freeing unused kernel memory: 196k freed <5>SCSI subsystem initialized <7>PCI: Enabling device: (0000:01:01.0), cmd 143 <6>sym0: <896> rev 0x7 at pci 0000:01:01.0 irq 35 <4>sym0: No NVRAM, ID 7, Fast-40, SE, parity checking <5>sym0: SCSI BUS has been reset. <6>scsi0 : sym-2.1.18i <6>sym0:0: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 31) <5> Vendor: HP Model: IBM-C568303030!D Rev: C209 <5> Type: Sequential-Access ANSI SCSI revision: 02 <5> Vendor: IBM Model: CDRM00203 !K Rev: 1_06 <5> Type: CD-ROM ANSI SCSI revision: 02 <6>sym0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 15) <4>sr0: scsi-1 drive <6>Uniform CD-ROM driver Revision: 3.20 <7>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 <6>sym0:2: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 31) <5> Vendor: IBM Model: ST318305LC Rev: C547 <5> Type: Direct-Access ANSI SCSI revision: 03 <6>sym0:2:0: tagged command queuing enabled, command queue depth 16. <5>SCSI device sda: 17774160 512-byte hdwr sectors (9100 MB) <5>SCSI device sda: drive cache: write through <6> sda: sda1 sda2 sda3 <5>Attached scsi disk sda at scsi0, channel 0, id 2, lun 0 <6>sym0:4: FAST-20 WIDE SCSI 40.0 MB/s ST (50.0 ns, offset 31) <5> Vendor: IBM Model: ST318305LC Rev: C547 <5> Type: Direct-Access ANSI SCSI revision: 03 <6>sym0:4:0: tagged command queuing enabled, command queue depth 16. <5>SCSI device sdb: 17774160 512-byte hdwr sectors (9100 MB) <5>SCSI device sdb: drive cache: write through <6> sdb: sdb1 <5>Attached scsi disk sdb at scsi0, channel 0, id 4, lun 0 <7>PCI: Enabling device: (0000:01:01.1), cmd 143 <6>sym1: <896> rev 0x7 at pci 0000:01:01.1 irq 34 <4>sym1: No NVRAM, ID 7, Fast-40, LVD, parity checking <5>sym1: SCSI BUS has been reset. <6>scsi1 : sym-2.1.18i <5>ReiserFS: sda3: found reiserfs format "3.6" with standard journal <5>ReiserFS: sda3: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: sda3: checking transaction log (sda3) <4>reiserfs: disabling flush barriers on sda3 <5>ReiserFS: sda3: Using r5 hash to sort names <6>Adding 2098168k swap on /dev/sda2. Priority:42 extents:1 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com <5>ReiserFS: sdb1: found reiserfs format "3.6" with standard journal <5>ReiserFS: sdb1: using ordered data mode <4>reiserfs: using flush barriers <5>ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 <5>ReiserFS: sdb1: checking transaction log (sdb1) <4>reiserfs: disabling flush barriers on sdb1 <5>ReiserFS: sdb1: Using r5 hash to sort names <7>PCI: Enabling device: (0001:11:01.0), cmd 143 <6>pcnet32: PCnet/FAST 79C971 at 0x10ec00, 00 06 29 84 ae 95 <6> tx_start_pt(0x0c00):~220 bytes, BCR18(68e1):BurstWrEn BurstRdEn DWordIO NoUFlow <6> SRAMSIZE=0x7f00, SRAM_BND=0x4000, assigned IRQ 51. <6>eth0: registered as PCnet/FAST 79C971 <6>pcnet32: 1 cards_found. <6>st: Version 20040318, fixed bufsize 32768, s/g segs 256 <4>Attached scsi tape st0 at scsi0, channel 0, id 0, lun 0 <4>st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 786432 <6>e100: Intel(R) PRO/100 Network Driver, 3.0.17 <6>e100: Copyright(c) 1999-2004 Intel Corporation <7>PCI: Enabling device: (0001:17:01.0), cmd 143 <6>e100: eth1: e100_probe: addr 0xff08030000, irq 52, MAC addr 00:02:55:6A:B6:CC <6>cdrom: open failed. <5>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 1 <5>Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 5 <5>Attached scsi generic sg2 at scsi0, channel 0, id 2, lun 0, type 0 <5>Attached scsi generic sg3 at scsi0, channel 0, id 4, lun 0, type 0 <6>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 ----- kernel log end ----- misc.1: misc data misc.1.1: open serial misc.1.2: open parallel misc.1.3: read floppy read_block0: open(/dev/fd0) failed misc.2.1: io misc.2.2: dma misc.2.3: irq ----- /proc/ioports ----- 00000000-000fffff : /pci@fff7f09000 00000000-0000001f : dma1 00000020-0000003f : pic1 00000040-0000005f : timer 00000060-0000006f : i8042 00000080-0000008f : dma page reg 000000a0-000000bf : pic2 000000c0-000000df : dma2 000002f8-000002ff : serial 00000378-0000037a : parport0 0000037b-0000037f : parport0 000003c0-000003df : matrox 000003f2-000003f5 : floppy 000003f7-000003f7 : floppy DIR 000003f8-000003ff : serial 00000890-00000897 : serial 00000898-0000089f : serial 00010000-0001ffff : PCI Bus #01 0001e800-0001e8ff : 0000:01:01.0 0001e800-0001e8ff : sym53c8xx 0001ec00-0001ecff : 0000:01:01.1 0001ec00-0001ecff : sym53c8xx 00020000-0002ffff : PCI Bus #04 00030000-0003ffff : PCI Bus #07 00040000-0004ffff : PCI Bus #0a 00100000-001fffff : /pci@fff7f0a000 00100000-0010ffff : PCI Bus #11 0010ec00-0010ec1f : 0001:11:01.0 0010ec00-0010ec1f : pcnet32_probe_pci 00120000-0012ffff : PCI Bus #17 0012ec00-0012ec3f : 0001:17:01.0 0012ec00-0012ec3f : e100 00130000-0013ffff : PCI Bus #1a 00140000-0014ffff : PCI Bus #1d 00150000-0015ffff : PCI Bus #21 00160000-0016ffff : PCI Bus #24 00170000-0017ffff : PCI Bus #27 00180000-0018ffff : PCI Bus #2a 0018ec00-0018ecff : 0001:2a:01.0 ----- /proc/ioports end ----- ----- /proc/interrupts ----- 1: 1378 1377 XICS/8259 Edge i8042 2: 0 0 XICS/8259 Edge 82c59 secondary cascade 3: 1 0 XICS/8259 Edge serial 4: 0 1 XICS/8259 Edge serial 6: 8 6 XICS/8259 Edge floppy 12: 27 26 XICS/8259 Edge i8042 18: 523 444 XICS Edge IPI 34: 15 15 XICS Edge sym53c8xx 35: 4944 4949 XICS Edge sym53c8xx 44: 0 0 XICS Edge 8259 cascade 51: 295 292 XICS Edge eth0 96: 0 0 XICS Edge RAS_ERROR 97: 0 0 XICS Edge RAS_EPOW BAD: 1 ----- /proc/interrupts end ----- ----- /proc/dma ----- 2: floppy 4: cascade ----- /proc/dma end ----- misc.3: FPU misc.3.1: DMA misc.3.2: PIC misc.3.3: timer misc.3.4: RTC cpu.1: cpuinfo ----- /proc/cpuinfo -----
memory.1: main memory size kcore mem: 0x0 klog mem 0: 0x0 klog mem 1: 0x0 klog mem: 0x0 bios mem: 0x0 meminfo: 0xb7bfa000 pci.1: sysfs drivers ----- sysfs driver list (id 0xfad3467ee69b4e34) ----- e100: /devices/pci0001:10/0001:10:0b.2/0001:17:01.0 matroxfb: /devices/pci0001:10/0001:10:0b.6/0001:1d:01.0 pcnet32: /devices/pci0001:10/0001:10:0b.0/0001:11:01.0 sym53c8xx: /devices/pci0000:00/0000:00:0b.0/0000:01:01.0 sym53c8xx: /devices/pci0000:00/0000:00:0b.0/0000:01:01.1 sd: /devices/pci0000:00/0000:00:0b.0/0000:01:01.0/host0/0:0:2:0 sd: /devices/pci0000:00/0000:00:0b.0/0000:01:01.0/host0/0:0:4:0 sr: /devices/pci0000:00/0000:00:0b.0/0000:01:01.0/host0/0:0:1:0 st: /devices/pci0000:00/0000:00:0b.0/0000:01:01.0/host0/0:0:0:0 ----- sysfs driver list end ----- pci.2: get sysfs pci data
I can install succesfully both sles8-sp3 and sles9-sp2 on 02 internal scsi disk, here a part of hwinfo of sles9: ============ start debug info ============ libhd version 8.61 (ppc) kernel version is 2.6 ----- /proc/cmdline ----- root=/dev/sda3 selinux=0 elevator=cfq ----- /proc/cmdline end ----- debug = 0xff7ffff7 probe = 0x438fc4ac107ffdfffe (+memory +pci +isapnp +net +floppy +misc +misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi +usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa +isa.isdn +isdn +kbd +prom +sbus +int -braille -braille.alva -braille.fhp -braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod -braille.baum +manual +fb +pppoe -scan +pcmcia -fork -parallel.imm +s390 -cpuemu -sysfs -s390disks +udev +block +block.cdrom +block.part +edd +edd.mod -bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -cpuemu.debug -scsi.noserial -max -lxrc +dsl) shm: attached segment 1671168 at 0x40028000 processor : 0 cpu : RS64-IV (sstar) clock : 752.010000MHz revision : 0.0 processor : 1 cpu : RS64-IV (sstar) clock : 752.010000MHz revision : 0.0 timebase : 751979060 machine : CHRP IBM,7025-6F1 ----- /proc/cpuinfo end ----- pci device: name = 0000:00:0b.0, bus_id = 0000:00:0b.0, bus = pci path = /devices/pci0000:00/0000:00:0b.0 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 33 res[0] = 0xfe9fff8000 0xfe9fffffff 0x1208 config[64] pci device: name = 0000:00:0b.2, bus_id = 0000:00:0b.2, bus = pci path = /devices/pci0000:00/0000:00:0b.2 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 33 res[0] = 0xfdc0000000 0xfdc0007fff 0x1208 config[64] pci device: name = 0000:00:0b.4, bus_id = 0000:00:0b.4, bus = pci path = /devices/pci0000:00/0000:00:0b.4 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 33 res[0] = 0xfdc0000000 0xfdc0007fff 0x1208 config[64] pci device: name = 0000:00:0b.6, bus_id = 0000:00:0b.6, bus = pci path = /devices/pci0000:00/0000:00:0b.6 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 33 res[0] = 0xfdc0000000 0xfdc0007fff 0x1208 config[64] pci device: name = 0000:00:10.0, bus_id = 0000:00:10.0, bus = pci path = /devices/pci0000:00/0000:00:10.0 class = 0x60100 vendor = 0x10ad device = 0x565 subvendor = 0x0 subdevice = 0x0 irq = 0 config[64] pci device: name = 0000:00:11.0, bus_id = 0000:00:11.0, bus = pci path = /devices/pci0000:00/0000:00:11.0 class = 0xb40ff vendor = 0x1014 device = 0xe0 subvendor = 0x1014 subdevice = 0xe1 irq = 39 res[0] = 0xfebd700000 0xfebd700fff 0x1208 res[1] = 0xfebd800000 0xfebd87ffff 0x1208 res[2] = 0xfeb4000000 0xfeb4ffffff 0x1208 res[3] = 0xfeb8000000 0xfeb87fffff 0x1208 config[64] pci device: name = 0000:01:01.0, bus_id = 0000:01:01.0, bus = pci path = /devices/pci0000:00/0000:00:0b.0/0000:01:01.0 class = 0x10000 vendor = 0x1000 device = 0xb subvendor = 0x1000 subdevice = 0x1000 irq = 35 res[0] = 0x1e800 0x1e8ff 0x101 res[1] = 0xfe80005000 0xfe800053ff 0x204 res[3] = 0xfe80002000 0xfe80003fff 0x204 config[64] pci device: name = 0000:01:01.1, bus_id = 0000:01:01.1, bus = pci path = /devices/pci0000:00/0000:00:0b.0/0000:01:01.1 class = 0x10000 vendor = 0x1000 device = 0xb subvendor = 0x1000 subdevice = 0x1000 irq = 34 res[0] = 0x1ec00 0x1ecff 0x101 res[1] = 0xfe80004000 0xfe800043ff 0x204 res[3] = 0xfe80000000 0xfe80001fff 0x204 config[64] pci device: name = 0001:10:0b.0, bus_id = 0001:10:0b.0, bus = pci path = /devices/pci0001:10/0001:10:0b.0 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 49 res[0] = 0xff3fff0000 0xff3fff7fff 0x1208 config[64] pci device: name = 0001:10:0b.2, bus_id = 0001:10:0b.2, bus = pci path = /devices/pci0001:10/0001:10:0b.2 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 49 res[0] = 0xfe40000000 0xfe40007fff 0x1208 config[64] pci device: name = 0001:10:0b.4, bus_id = 0001:10:0b.4, bus = pci path = /devices/pci0001:10/0001:10:0b.4 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 49 res[0] = 0xfe40000000 0xfe40007fff 0x1208 config[64] pci device: name = 0001:10:0b.6, bus_id = 0001:10:0b.6, bus = pci path = /devices/pci0001:10/0001:10:0b.6 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 49 res[0] = 0xfe40000000 0xfe40007fff 0x1208 config[64] pci device: name = 0001:10:0c.0, bus_id = 0001:10:0c.0, bus = pci path = /devices/pci0001:10/0001:10:0c.0 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 50 config[64] pci device: name = 0001:10:0c.2, bus_id = 0001:10:0c.2, bus = pci path = /devices/pci0001:10/0001:10:0c.2 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 50 res[0] = 0xfe40000000 0xfe40007fff 0x1208 config[64] pci device: name = 0001:10:0c.4, bus_id = 0001:10:0c.4, bus = pci path = /devices/pci0001:10/0001:10:0c.4 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 50 res[0] = 0xfe40000000 0xfe40007fff 0x1208 config[64] pci device: name = 0001:10:0c.6, bus_id = 0001:10:0c.6, bus = pci path = /devices/pci0001:10/0001:10:0c.6 class = 0x6040f vendor = 0x1014 device = 0x8b subvendor = 0x0 subdevice = 0x0 irq = 50 res[0] = 0xfe40000000 0xfe40007fff 0x1208 config[64] pci device: name = 0001:11:01.0, bus_id = 0001:11:01.0, bus = pci path = /devices/pci0001:10/0001:10:0b.0/0001:11:01.0 class = 0x20000 vendor = 0x1022 device = 0x2000 subvendor = 0x0 subdevice = 0x0 irq = 51 res[0] = 0x10ec00 0x10ec1f 0x101 res[1] = 0xff00100000 0xff0010001f 0x200 res[6] = 0xff00000000 0xff000fffff 0x7200 config[64] pci device: name = 0001:17:01.0, bus_id = 0001:17:01.0, bus = pci path = /devices/pci0001:10/0001:10:0b.2/0001:17:01.0 class = 0x20000 vendor = 0x8086 device = 0x1229 subvendor = 0x1014 subdevice = 0x1ff irq = 52 res[0] = 0xff08030000 0xff08030fff 0x200 res[1] = 0x12ec00 0x12ec3f 0x101 res[2] = 0xff08000000 0xff0801ffff 0x200 res[6] = 0xff08020000 0xff0802ffff 0x7200 config[64] pci device: name = 0001:1d:01.0, bus_id = 0001:1d:01.0, bus = pci path = /devices/pci0001:10/0001:10:0b.6/0001:1d:01.0 class = 0x30000 vendor = 0x102b device = 0x520 subvendor = 0x0 subdevice = 0x0 irq = 54 res[0] = 0xff18000000 0xff18ffffff 0x1208 res[1] = 0xff1a800000 0xff1a803fff 0x200 res[2] = 0xff1a000000 0xff1a7fffff 0x200 res[6] = 0xff1b000000 0xff1b00ffff 0x7200 config[64] pci device: name = 0001:2a:01.0, bus_id = 0001:2a:01.0, bus = pci path = /devices/pci0001:10/0001:10:0c.6/0001:2a:01.0 class = 0x10400 vendor = 0x1014 device = 0x2e subvendor = 0x1014 subdevice = 0x22e irq = 58 res[0] = 0x18ec00 0x18ecff 0x101 res[1] = 0xff38000000 0xff380fffff 0x200 res[6] = 0xff38100000 0xff38107fff 0x7200 config[64] ... ----- /proc/modules ----- parport_pc 89432 0 - Live 0xd0000000006b5000 parport 84616 1 parport_pc, Live 0xd0000000006d0000 nls_iso8859_1 22912 0 - Live 0xd0000000005a0000 iptable_mangle 22400 0 - Live 0xd00000000054f000 iptable_nat 56514 0 - Live 0xd000000000643000 ip_conntrack 68996 1 iptable_nat, Live 0xd00000000058e000 iptable_filter 21912 0 - Live 0xd000000000548000 ip_tables 44544 3 iptable_mangle,iptable_nat,iptable_filter, Live 0xd000000000556000 ip6table_filter 21904 0 - Live 0xd0000000004ee000 ip6_tables 46336 1 ip6table_filter, Live 0xd00000000051d000 ipv6 478560 12 - Live 0xd0000000005ac000 evdev 31416 0 - Live 0xd000000000514000 joydev 31520 0 - Live 0xd00000000050b000 sg 74176 0 - Live 0xd0000000004f7000 e100 71624 0 - Live 0xd00000000049d000 st 72688 0 - Live 0xd000000000478000 pcnet32 64264 0 - Live 0xd00000000048c000 usbcore 183644 1 - Live 0xd0000000004b2000 subfs 30168 2 - Live 0xd00000000030d000 dm_mod 108224 0 - Live 0xd000000000319000 sym53c8xx 135616 4 - Live 0xd000000000053000 sr_mod 44380 0 - Live 0xd00000000003a000 sd_mod 43792 5 - Live 0xd000000000047000 scsi_mod 192024 5 sg,st,sym53c8xx,sr_mod,sd_mod, Live 0xd00000000007a000 ----- /proc/modules end ----- ..... 31: PCI 12a01.0: 0104 RAID bus controller [Created at pci.244] Unique ID: rTbw.NjONjrrf1fE Parent ID: rnRx.ChFZJYqP4AC SysFS ID: /devices/pci0001:10/0001:10:0c.6/0001:2a:01.0 SysFS BusID: 0001:2a:01.0 Hardware Class: storage Model: "IBM ServeRAID 4H" Vendor: pci 0x1014 "IBM" Device: pci 0x002e "SCSI RAID Adapter [ServeRAID]" SubVendor: pci 0x1014 "IBM" SubDevice: pci 0x022e "ServeRAID 4H" Revision: 0x10 PROM id: pci@fff7f0a000/pci@c,6/raid@1 I/O Ports: 0x18ec00-0x18ecff (rw,disabled) Memory Range: 0xff38000000-0xff380fffff (rw,non-prefetchable,disabled) Memory Range: 0xff38100000-0xff38107fff (ro,prefetchable,disabled) IRQ: 58 (no events) Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #27 (PCI bridge) Tomas Carmen R. SINUX S.A.C. Central: 222-5248 Anexo: 228 Movil: 9824-5034 Nextel: 824*5034 http://www.sinux.com.pe -----Mensaje original----- De: Tomas Carmen - SINUX S.A.C. [mailto:tcarmen@sinux.com.pe] Enviado el: Viernes, 16 de Diciembre de 2005 12:54 p.m. Para: suse-ppc@suse.com Asunto: RE: [suse-ppc] problem sles p620 with Ultra3 scsi raid Here is my lspci, my attach aparently are filtered in this maillist Thanks in advance 0000:00:0b.0 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:0b.2 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:0b.4 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:0b.6 PCI bridge: IBM: Unknown device 008b (rev 02) 0000:00:10.0 ISA bridge: Symphony Labs W83C553 (rev 10) 0000:00:11.0 Co-processor: IBM: Unknown device 00e0 (rev 01) 0000:01:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) 0000:01:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) 0001:10:0b.0 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0b.2 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0b.4 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0b.6 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.0 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.2 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.4 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:10:0c.6 PCI bridge: IBM: Unknown device 008b (rev 02) 0001:11:01.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 26) 0001:17:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) 0001:1d:01.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 (rev 01) 0001:2a:01.0 RAID bus controller: IBM SCSI RAID Adapter [ServeRAID] (rev 10) Tomas Carmen R. SINUX S.A.C. http://www.sinux.com.pe -----Mensaje original----- De: Olaf Hering [mailto:olh@suse.de] Enviado el: Viernes, 16 de Diciembre de 2005 12:46 p.m. Para: Tomas Carmen - SINUX S.A.C. CC: suse-ppc@suse.com Asunto: Re: [suse-ppc] problem sles p620 with Ultra3 scsi raid On Fri, Dec 16, Tomas Carmen - SINUX S.A.C. wrote:
01 PCI 4-Channel Ultra3 SCSI RAID Adapter with 5 scsi disks
Can you paste the lspci -n output? Boot into the rescue system if you cant get it installed. -- short story of a lazy sysadmin: alias appserv=wotan
On Fri, Dec 16, Tomas Carmen - SINUX S.A.C. wrote:
0001:2a:01.0 RAID bus controller: IBM SCSI RAID Adapter [ServeRAID] (rev 10)
This card needs the ips driver. Quote from the ips source: #if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__) #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" #endif You should probably contact the guys at linux-scsi@vger.kernel.org, maybe they can help you with porting the driver to ppc64. -- short story of a lazy sysadmin: alias appserv=wotan
Hi another question... can I install Linux LPAR on this machine? thanks Tomas Carmen R. SINUX S.A.C. Central: 222-5248 Anexo: 228 Movil: 9824-5034 Nextel: 824*5034 http://www.sinux.com.pe -----Mensaje original----- De: Olaf Hering [mailto:olh@suse.de] Enviado el: Viernes, 16 de Diciembre de 2005 02:21 p.m. Para: Tomas Carmen - SINUX S.A.C. CC: suse-ppc@suse.com Asunto: Re: [suse-ppc] problem sles p620 with Ultra3 scsi raid On Fri, Dec 16, Tomas Carmen - SINUX S.A.C. wrote:
0001:2a:01.0 RAID bus controller: IBM SCSI RAID Adapter [ServeRAID] (rev 10)
This card needs the ips driver. Quote from the ips source: #if !defined(__i386__) && !defined(__ia64__) && !defined(__x86_64__) #warning "This driver has only been tested on the x86/ia64/x86_64 platforms" #endif You should probably contact the guys at linux-scsi@vger.kernel.org, maybe they can help you with porting the driver to ppc64. -- short story of a lazy sysadmin: alias appserv=wotan
participants (2)
-
Olaf Hering -
Tomas Carmen - SINUX S.A.C.