Hi Alex, I have installed openSUSE 12.3 ppc32 on a usb stick with QEMU with following command: qemu-system-ppc -M mac99 -m 2048 -bios /usr/share/openbios/openbios-ppc -cdrom openSUSE-NET-ppc-Build0022-Media.iso -usb -usbdevice host:0781:556c -boot order=d -net nic,vlan=0,model=e1000 -net user,vlan=0 After a rsync on a X1000's partition, it boots well on my X1000. Welcome to openSUSE 12.3 "Dartmouth" - Kernel 3.10.13X1000_PW-1.3f (tty1) Thank you very much for your help. :) All the best Christian Am 03.10.2013 06:43, schrieb Alexander Graf:
Sure :).
You could also create a tar based kiwi configuration and have obs build it, like we do for arm. Then you can use that as rootfs for your system.
Alex
Am 02.10.2013 um 21:21 schrieb Christian Zigotzky <chzigotzky@xenosoft.de>:
Hi Alex,
Is it possible to install openSUSE 32-bit over QEMU on a USB stick and then boot it with a 64-bit kernel on an AmigaOne X1000?
Best regards, Christian
Am 02.10.13 19:44, schrieb Alexander Graf:
On 02.10.2013, at 19:31, Christian Zigotzky wrote:
Am 02.10.13 19:18, schrieb Alexander Graf:
On 02.10.2013, at 19:05, Christian Zigotzky wrote:
Hi there,
I've tried to install openSUSE 12.3 on my AmigaOne X1000. Unfortunately the installation of a lot of 64-bit packages failed. Issue: scriptlet failed, signal 11. 64-bit packages won't work because the PA6T is not compatible (enough) to POWER4 which is the minimum requirement for 64-bit openSUSE 12.3 to work.
Alex Hi Alex,
Thank you for your answer. Can I install a 32-bit openSUSE 12.3 system? Or is openSUSE 12.2 compatible with my PA6T? Sure! As long as you don't use 64-bit binaries, a 32-bit 12.3 system should work just fine on PA6T.
Alex -- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-ppc+owner@opensuse.org
-- To unsubscribe, e-mail: opensuse-ppc+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-ppc+owner@opensuse.org