hi. i'm new on this list and new in udf fs i've read all about udf and i did this: install kernel 2.6.8.1 apply packet-patch-2.6.8-2 put Y (not module M) on packet writing and Y to UDF fs compile and install without problems get udftools 10b3 patching with patch to suport all version of pktdriver (>=0.2.0) i've take a look in /dev/ and i already have pktcdvd, 0,1,2,3 but /usr/local/bin/pktsetup /dev/pktcdvd0 /dev/hdc it's not working open packet device: No such device or address what i missing? PS: i try the same for 2.6.9 but the same error thx
Try /usr/local/bin/pktsetup /dev/pktcdvd/0 /dev/hdc. Ingo
hi. i'm new on this list and new in udf fs
i've read all about udf and i did this:
install kernel 2.6.8.1 apply packet-patch-2.6.8-2 put Y (not module M) on packet writing and Y to UDF fs compile and install without problems
get udftools 10b3 patching with patch to suport all version of pktdriver (>=0.2.0)
i've take a look in /dev/ and i already have pktcdvd, 0,1,2,3
but /usr/local/bin/pktsetup /dev/pktcdvd0 /dev/hdc it's not working open packet device: No such device or address
what i missing?
PS: i try the same for 2.6.9 but the same error
thx
Ingo Brunberg wrote
Try /usr/local/bin/pktsetup /dev/pktcdvd/0 /dev/hdc.
Likely won't work, too. Try sth. like "pktsetup mycd /dev/hdc". This will create /dev/pktcdvd/mycd and that's the device you can use for mounting. This way it works for us, while doing like the man page says doesn't work here either. -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049
Frank Steiner(fsteiner-mail@bio.ifi.lmu.de) is reported to have said:
Ingo Brunberg wrote
Try /usr/local/bin/pktsetup /dev/pktcdvd/0 /dev/hdc.
There is no /dev/pktcdvd or /dev/pktcdvd/0 here. __but__
Likely won't work, too. Try sth. like "pktsetup mycd /dev/hdc". This will create /dev/pktcdvd/mycd and that's the device you can use for mounting. This way it works for us, while doing like the man page says doesn't work here either.
Thanks for that!!! Have been messing with this problem for 2 weeks and this does work!!!! Debian 3.1, Kernel 2.6.8, udftools 1.0.0b3-5. Thank you __very__ much! Wayne
Shame on me. I've done this several times before, but apparently I cannot get used to it. When I first used the new patched pktsetup I also had a hard time to find out how to use it correctly. When you run pktsetup without parameters you get a usage message that says: pktsetup dev_name /dev/cdrom
From that you can guess that you can substitute an arbitrary name for dev_name, but it's not quite obvious. An additional README or Changelog entry would be extremely helpful.
Ingo Brunberg wrote
Try /usr/local/bin/pktsetup /dev/pktcdvd/0 /dev/hdc.
Likely won't work, too. Try sth. like "pktsetup mycd /dev/hdc". This will create /dev/pktcdvd/mycd and that's the device you can use for mounting. This way it works for us, while doing like the man page says doesn't work here either.
-- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049
IB> Shame on me. I've done this several times before, but apparently I IB> cannot get used to it. IB> When I first used the new patched pktsetup I also had a hard time to IB> find out how to use it correctly. When you run pktsetup without IB> parameters you get a usage message that says: IB> pktsetup dev_name /dev/cdrom IB> From that you can guess that you can substitute an arbitrary name for IB> dev_name, but it's not quite obvious. An additional README or IB> Changelog entry would be extremely helpful. i've try pktsetup mycd /dev/hdc but i've got the error ctl open: not a directory -- Best regards, Remus mailto:rlug@devaonline.ro
Remus Anca wrote Is /dev/pktcdvd/ a directory? Make sure it is not a node. -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049
Hello Frank, Wednesday, October 27, 2004, 12:46:42 PM, you wrote: FS> Remus Anca wrote FS> Is /dev/pktcdvd/ a directory? Make sure it is not a node. you're right. it's a --w-r----t file !? how can i make it correctly? -- Best regards, Remus mailto:rlug@devaonline.ro
Remus Anca wrote
Hello Frank,
Wednesday, October 27, 2004, 12:46:42 PM, you wrote:
FS> Remus Anca wrote
FS> Is /dev/pktcdvd/ a directory? Make sure it is not a node.
you're right. it's a --w-r----t file !?
how can i make it correctly?
Just "rm /dev/pktcdvd" and "mkdir /dev/pktcdvd", if you have a static /dev. If you are using tmpfs/udev, some setup script is wrong on your system. Check that the dir has 755 and root:root. cu, Frank -- Dipl.-Inform. Frank Steiner Web: http://www.bio.ifi.lmu.de/~steiner/ Lehrstuhl f. Bioinformatik Mail: http://www.bio.ifi.lmu.de/~steiner/m/ LMU, Amalienstr. 17 Phone: +49 89 2180-4049 80333 Muenchen, Germany Fax: +49 89 2180-99-4049 * Rekursion kann man erst verstehen, wenn man Rekursion verstanden hat. *
FS> Just "rm /dev/pktcdvd" and "mkdir /dev/pktcdvd", if you have a static FS> /dev. If you are using tmpfs/udev, some setup script is wrong on your FS> system. FS> Check that the dir has 755 and root:root. thx.!!! a just rm /dev/pktcdvd and run pktsetup mycd /dev/hdc an finally IT'S WORKING !!! -- Best regards, Remus mailto:rlug@devaonline.ro
On Wed, 27 Oct 2004, Ingo Brunberg wrote:
Shame on me. I've done this several times before, but apparently I cannot get used to it.
When I first used the new patched pktsetup I also had a hard time to find out how to use it correctly. When you run pktsetup without parameters you get a usage message that says:
pktsetup dev_name /dev/cdrom
From that you can guess that you can substitute an arbitrary name for dev_name, but it's not quite obvious. An additional README or Changelog entry would be extremely helpful.
I forgot to update the man-page when I wrote the udftools patch. There is some documentation in linux/Documentation/cdrom/packet-writing.txt, but it doesn't explicitly say that dev_name has to be a valid filename. I'll fix the man-page and submit the patch for inclusion in the udftools cvs. -- Peter Osterlund - petero2@telia.com http://w1.894.telia.com/~u89404340
participants (5)
-
Frank Steiner -
Ingo Brunberg -
Peter Osterlund -
Remus Anca -
Wayne Topa