[opensuse-packaging] looking for a workaround: library not found in configure script

Werner Flamme

22 Jun 2009 22 Jun '09

11:46

Hi, I try to package csync2 (http://oss.linbit.com/csync2/) and I got an annoying problem. When starting "osc build openSUSE_11.0 x86_64 csync2.spec" it starts to build the build-root and continues up to the %configure section. Here I get ---snip--- checking for SSL_new in -lgnutls-openssl... no configure: error: gnutls-openssl not found; install gnutls, gnutls-openssl and libtasn1 packages for your system or run configure with --disable-gnutls ---pins--- Hrmph. Nonsense. When I do (as root) "ln -s libgnutls-openssl.so.26 libgnutls-openssl.so" inside the %{_libdir}, everything works fine from then on (without using "ldconfig" manually). Unfortunately, I cannot put this line into the spec file since the package isn't built as root, and the "abuild" user has no rights to create the symlink. How can I work around this? Create a dummy package that creates the symlink in the %post section and that is required by the csync2 package? Regards, Werner -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Show replies by thread

Dominique Leuenberger

22 Jun 22 Jun

11:54

New subject: [opensuse-packaging] looking for a workaround: library not found in configure script

...

...
...
On 6/22/2009 at 13:46, Werner Flamme wrote: Hi, Hrmph. Nonsense. When I do (as root) "ln -s libgnutls-openssl.so.26 libgnutls-openssl.so" inside the %{_libdir}, everything works fine from then on (without using "ldconfig" manually). Unfortunately, I cannot put this line into the spec file since the package isn't built as root, and the "abuild" user has no rights to create the symlink.

Add BuildRequires: libgnutls-devel to your spec file. *.so are always part of the -devel packages. (exceptions apply like to every rule) Dominique -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Werner Flamme

12:32

New subject: [opensuse-packaging] looking for a workaround: library not found in configure script

Dominique Leuenberger [22.06.2009 13:54]:

...

...
...
...
On 6/22/2009 at 13:46, Werner Flamme wrote: Hi, Hrmph. Nonsense. When I do (as root) "ln -s libgnutls-openssl.so.26 libgnutls-openssl.so" inside the %{_libdir}, everything works fine from then on (without using "ldconfig" manually). Unfortunately, I cannot put this line into the spec file since the package isn't built as root, and the "abuild" user has no rights to create the symlink.

Add BuildRequires: libgnutls-devel to your spec file.

*.so are always part of the -devel packages. (exceptions apply like to every rule)

Thanks Dominique, at the moment the BuildRequires line reads: BuildRequires: librsync openssl-devel glibc-devel libgcc gcc gcc-c++ bison flex libtasn1-devel libgnutls-devel libgnutls-extra26 libopenssl-devel so libgnutls-devel already is inside the BuildRequires line. Unfortunately, the package does not create /usr/lib64/libgnutls-openssl.so, but /usr/lib64/libgnutls-openssl.so.26 (which in turn is a symlink to libgnutls-openssl.so.26.1.3). Until now, I only tried 11.0 and 11.1, and this problem exists on both systems when building x86_64 or i586. Regards, Werner -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Michael Matz

12:42

Hi, On Mon, 22 Jun 2009, Werner Flamme wrote:

...

at the moment the BuildRequires line reads:

BuildRequires: librsync openssl-devel glibc-devel libgcc gcc gcc-c++ bison flex libtasn1-devel libgnutls-devel libgnutls-extra26 libopenssl-devel

so libgnutls-devel already is inside the BuildRequires line. Unfortunately, the package does not create /usr/lib64/libgnutls-openssl.so, but /usr/lib64/libgnutls-openssl.so.26 (which in turn is a symlink to libgnutls-openssl.so.26.1.3).

For libgnutls-openssl you also need libgnutls-extra-devel. Ciao, Michael. -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Marcus Meissner

12:49

New subject: [opensuse-packaging] looking for a workaround: library not found in configure script

On Mon, Jun 22, 2009 at 02:32:42PM +0200, Werner Flamme wrote:

...

Dominique Leuenberger [22.06.2009 13:54]:

...
...
...
...
On 6/22/2009 at 13:46, Werner Flamme wrote: Hi, Hrmph. Nonsense. When I do (as root) "ln -s libgnutls-openssl.so.26 libgnutls-openssl.so" inside the %{_libdir}, everything works fine from then on (without using "ldconfig" manually). Unfortunately, I cannot put this line into the spec file since the package isn't built as root, and the "abuild" user has no rights to create the symlink.

Add BuildRequires: libgnutls-devel to your spec file.

*.so are always part of the -devel packages. (exceptions apply like to every rule)

Thanks Dominique,

at the moment the BuildRequires line reads:

BuildRequires: librsync openssl-devel glibc-devel libgcc gcc gcc-c++ bison flex libtasn1-devel libgnutls-devel libgnutls-extra26 libopenssl-devel

so libgnutls-devel already is inside the BuildRequires line. Unfortunately, the package does not create /usr/lib64/libgnutls-openssl.so, but /usr/lib64/libgnutls-openssl.so.26 (which in turn is a symlink to libgnutls-openssl.so.26.1.3). Until now, I only tried 11.0 and 11.1, and this problem exists on both systems when building x86_64 or i586.

/usr/lib64/libgnutls-openssl.so is in the RPM "libgnutls-extra-devel", however this is the compat link for openssl-devel, so not sure why both are needed. Perhaps it is not required. Ciao, Marcus -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Werner Flamme

13:47

New subject: [opensuse-packaging] looking for a workaround: library not found in configure script

Marcus Meissner [22.06.2009 14:49]:

...

On Mon, Jun 22, 2009 at 02:32:42PM +0200, Werner Flamme wrote:

...
Dominique Leuenberger [22.06.2009 13:54]:

...
...
...
...
On 6/22/2009 at 13:46, Werner Flamme wrote: Hi, Hrmph. Nonsense. When I do (as root) "ln -s libgnutls-openssl.so.26 libgnutls-openssl.so" inside the %{_libdir}, everything works fine from then on (without using "ldconfig" manually). Unfortunately, I cannot put this line into the spec file since the package isn't built as root, and the "abuild" user has no rights to create the symlink. Add BuildRequires: libgnutls-devel to your spec file.

*.so are always part of the -devel packages. (exceptions apply like to every rule) Thanks Dominique,

at the moment the BuildRequires line reads:

BuildRequires: librsync openssl-devel glibc-devel libgcc gcc gcc-c++ bison flex libtasn1-devel libgnutls-devel libgnutls-extra26 libopenssl-devel

so libgnutls-devel already is inside the BuildRequires line. Unfortunately, the package does not create /usr/lib64/libgnutls-openssl.so, but /usr/lib64/libgnutls-openssl.so.26 (which in turn is a symlink to libgnutls-openssl.so.26.1.3). Until now, I only tried 11.0 and 11.1, and this problem exists on both systems when building x86_64 or i586.

/usr/lib64/libgnutls-openssl.so is in the RPM "libgnutls-extra-devel", however this is the compat link for openssl-devel, so not sure why both are needed.

Perhaps it is not required.

Marcus, adding libgnutls-extra-devel to the BuildRequires line did the trick! Hmmm... I added libgnutls-extra26-devel before, but that package did not exist, but instead of using libgnutls-extra-devel then I left it away completely. Dumb me :-( Thank you! Regards, Werner -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Cristian Rodríguez

14:45

New subject: [opensuse-packaging] looking for a workaround: library not found in configure script

On 22/06/09 08:32, Werner Flamme wrote:

...

...
...
then on (without using "ldconfig" manually).

If someday you have to run ldconfig manually after installing a package please open a bug report. ;) -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

Werner Flamme

23 Jun 23 Jun

07:15

New subject: [opensuse-packaging] looking for a workaround: library not found in configure script

Cristian Rodríguez [22.06.2009 16:45]:

...

On 22/06/09 08:32, Werner Flamme wrote:

...
...
...
then on (without using "ldconfig" manually).

If someday you have to run ldconfig manually after installing a package please open a bug report. ;)

a big one, I promise :-) Regards, Werner -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-packaging+help@opensuse.org

5436

Age (days ago)

5437

Last active (days ago)

List overview

Download

7 comments

5 participants

participants (5)

Cristian Rodríguez
Dominique Leuenberger
Marcus Meissner
Michael Matz
Werner Flamme