Hi, I have just successfully booted openSUSE 13.1 JeOS on my beagle bone black instance (see /var/log/messages at [1]). I am not sure that all peripherals are working, but I am able to communicate by Ethernet. Sure, I will check what is not working later. My working project is located at [2]. 1) u-boot-am335xevm I had to add patch to u-boot to make am335 to read bootscript. I sent SR to Base:System (and It is already accepted). I can easily sent this SR to 13.1:Ports. 2) dtb-am335x I had to patch existing dtb-source 3.12.5 to kernel master. So, no further patches are required for Factory, provided we will have kernel 3.13+ for 13.2. I can also SR to 13.1:Ports. 3) kernel This boots with kernel-default-3.11, but I had to apply 9 patches to make it work (look at kernel-source is at [3]): 2 of them are to fix ethernet module 7 of them are to fix DMA All of this patches are back-ports from upstream kernel. Provided we have kernel 3.13+ for 13.2, no patches are required for Factory. It is quite unlikely that our kernel teem will agree to apply 9 patches to openSUSE 13.1 kernel branch. 4) kiwi I have strange issue with kiwi, because I have to open my first partition and copy files from / to /boot directory manually before booting. Kiwi moves u-boot.bin and others from /boot to /, but u-boot looks for /boot/u-boot.bin [1] http://paste.opensuse.org/45517667 [2] https://build.opensuse.org/project/show/home:matwey:beaglebone [3] https://github.com/matwey/kernel-source -- With best regards, Matwey V. Kornilov http://blog.matwey.name xmpp:0x2207@jabber.ru -- To unsubscribe, e-mail: opensuse-packaging+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-packaging+owner@opensuse.org