2nd eth intfc fails to come up on v11.1 boot; ok on v11.0 ?
I've two boxes -- one OS 11.0, the other OS 11.1 On each I've configure interfaces, as cat /etc/sysconfig/network/ifcfg-eth0 STARTMODE='onboot' LLADDR='00:50:43:23:C1:AB' BOOTPROTO='static' ETHTOOL_OPTIONS='' IPADDR='10.2.1.2/22' BROADCAST='10.2.1.255' NETWORK='10.2.1.0' GATEWAY='10.2.1.1' MTU='1492' USERCONTROL='no' NM_CONTROLLED='no' cat /etc/sysconfig/network/ifcfg-eth1 STARTMODE='auto' LLADDR='00:1D:92:3B:4A:20' BOOTPROTO='none' ETHTOOL_OPTIONS='' MTU='1492' USERCONTROL='no' NM_CONTROLLED='no' on OS 11.0, immediately after reboot, ifconfig eth0 Link encap:Ethernet HWaddr 00:50:43:23:C1:AB inet addr:10.2.1.2 Bcast:10.2.1.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1 RX packets:423 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32804 (32.0 Kb) TX bytes:69493 (67.8 Kb) Interrupt:19 eth1 Link encap:Ethernet HWaddr 00:1D:92:3B:4A:20 UP BROADCAST MULTICAST MTU:1492 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2661 (2.5 Kb) TX bytes:2661 (2.5 Kb) but on 11.1, immediately after reboot, "eth1" is missing, ifconfig eth0 Link encap:Ethernet HWaddr 00:50:43:23:C1:AB inet addr:10.2.1.2 Bcast:10.2.1.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1492 Metric:1 RX packets:423 errors:0 dropped:0 overruns:0 frame:0 TX packets:277 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32804 (32.0 Kb) TX bytes:69493 (67.8 Kb) Interrupt:19 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:18 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2661 (2.5 Kb) TX bytes:2661 (2.5 Kb) @ 11.1 shell, i *can* bring the interface up, ifconfig eth1 up ifconfig eth1 eth1 Link encap:Ethernet HWaddr 00:1D:92:3B:4A:20 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:20 Base address:0xc000 and the only things syslog shows is, tail -f /var/log/messages ... Dec 19 12:50:04 server kernel: eth1: no link during initialization. What do I need to change/configure/investigate so that the eth1 interface comes UP @ boot on 11.1? Thanks. -- To unsubscribe, e-mail: opensuse-networking+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-networking+help@opensuse.org
On Fri, Dec 19, 2008 at 01:11:51PM -0800, PGNet wrote:
but on 11.1, immediately after reboot, "eth1" is missing, ... @ 11.1 shell, i *can* bring the interface up, ... and the only things syslog shows is,
tail -f /var/log/messages ... Dec 19 12:50:04 server kernel: eth1: no link during initialization.
What do I need to change/configure/investigate so that the eth1 interface comes UP @ boot on 11.1?
Try Google on "eth1: no link during initialization" along with the name of your network card (driver). -- Martin Vidner, YaST developer http://en.opensuse.org/User:Mvidner Kuracke oddeleni v restauraci je jako fekalni oddeleni v bazenu -- To unsubscribe, e-mail: opensuse-networking+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-networking+help@opensuse.org
participants (2)
-
Martin Vidner -
PGNet