Hi, Unfortunately, there is no internal connector on my TV card. However, I have tried fine tuning the channels and found the following: For most channels, if I increase the freq by 1 or 2 MHz, I can get a channel with very clear audio but no picture. I wonder if it is hardware problem or software (driver) problem. Have anyone come across this problem or have a explanation for it? By the way, I am using SuSE 8.0. The drivers, kwintv and motv are of the versions that come with the distribution. Regards, Reg
From: Mel Steinberg <saxofon@pacbell.net> Date: Fri 20/Sep/2002 22:53 CEST To: reg@ryue.freeserve.co.uk CC: suse-multimedia-e@suse.com Subject: Re: [suse-multimedia-e] TV tuner noisy audio
I had a similar problem when I installed a Pinnacle (Miro - in Europe) StudioPCTV Pro in my sister's computer. I got around it by using the internal connectors in both the tv card and the audio card, instead of the external 1/8" short stereo cable. I didn't have the same problem on my computer, but using the internal connection leaves the external line input free for recording, which is always handy.
/mel
reg@ryue.freeserve.co.uk wrote:
Hi,
I have got a PixelView PlayTV Pro TV (mono) tuner card and have installed the driver modules through YaST (the exact card model was selected manually). When I try to watch TV in motv and kwintv after scanning the channels, the picture is quite clear but the audio is very noisy (I can hardly hear the original audio of the programme). Does anyone come across this problem or have any suggestions what I can do?
Regards, Reg
_______________________________________________________________________ Freeserve AnyTime, only £13.99 per month with one month's FREE trial! For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890
_______________________________________________________________________ Freeserve AnyTime, only £13.99 per month with one month's FREE trial! For more information visit http://www.freeserve.com/time/ or call free on 0800 970 8890