Hallo Liste, bisher habe ich immer mit einer Kombination aus vdr und kvdr Fernseh geschaut. Seit ich meinem Computer jetzt einen 64-Bit AMD Prozessor "spendiert" habe, läuft allerdings kvdr nicht mehr. Es startet, ich kann auch Kanäle umstellen, sehe aber kein Bild. VDR läuft, und wenn ich vdr runterfahre, dann kann ich auch mit kaffeine Fernseh schauen, d.h. die DVB-Treiber funktionieren unter 64 Bit. Ich habe mir aich schon von der Homepage von kvdr die aktuelle Version 0.63 runtergeladen und kompiliert, allerdings ohne Erfolg. Ich sehe immer noch nur einen schwarzen Bildschirm. Ein Rechteproblem schließe ich aus, denn mit anderen Programmen funktioniert ja der Zugriff auf DVB... Weiß vielleicht irgendjemand eine Lösung, wie ich kvdr auf 64 bit dazu bewegen kann, mir ein Bild anzuzeigen? Meine DVB-Hardware: WinTV Nexus-s Rev. 2.1 (glaube ich zumindest, auf jeden Fall funktionieren die Treiber). AMD Athlon 64 - 3000+ Herzlichen Dank Tim Fischer -- Tim Fischer
Hallo Liste, bisher habe ich immer mit einer Kombination aus vdr und kvdr Fernseh geschaut. Seit ich meinem Computer jetzt einen 64-Bit AMD Prozessor "spendiert" habe, läuft allerdings kvdr nicht mehr. Es startet, ich kann auch Kanäle umstellen, sehe aber kein Bild. VDR läuft, und wenn ich vdr runterfahre, dann kann ich auch mit kaffeine Fernseh schauen, d.h. die DVB-Treiber funktionieren unter 64 Bit. Ich habe mir aich schon von der Homepage von kvdr die aktuelle Version 0.63 runtergeladen und kompiliert, allerdings ohne Erfolg. Ich sehe immer noch nur einen schwarzen Bildschirm. Ein Rechteproblem schließe ich aus, denn mit anderen Programmen funktioniert ja der Zugriff auf DVB... Weiß vielleicht irgendjemand eine Lösung, wie ich kvdr auf 64 bit dazu bewegen kann, mir ein Bild anzuzeigen? Meine DVB-Hardware: WinTV Nexus-s Rev. 2.1 (glaube ich zumindest, auf jeden Fall funktionieren die Treiber). AMD Athlon 64 - 3000+
Herzlichen Dank
Tim Fischer
Hmmm... Ich bin mir nicht ganz sicher aber ich glaube da war mal was mit der Taste x. Also vdr/kvdr wie bisher gehabt starten und dann in kvdr die Taste x drücken. Dann sollte ein Bild angezeigt werden. Sicher bin ich mir aber nicht, weil ich vdr bzw. kvdr nicht gebrauche. MfG Richi ___________________________________________________________ Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de
Hmmm... Ich bin mir nicht ganz sicher aber ich glaube da war mal was mit der Taste x. Also vdr/kvdr wie bisher gehabt starten und dann in kvdr die Taste x drücken. Dann sollte ein Bild angezeigt werden.
Der Tip mit der Taste x hat leider nichts genutzt, aber ich hab jetzt mal kvdr von der Konsole gestartet, da kommt folgende Fehlermeldung: VIDIOCSWIN: Ungültige Adresse Vielleicht kann jemand was damit anfangen? Gruß Tim Fischer -- Tim Fischer
Hallo, Am Dienstag, 23. August 2005 17:25 schrieb Tim Fischer:
bisher habe ich immer mit einer Kombination aus vdr und kvdr Fernseh geschaut. Seit ich meinem Computer jetzt einen 64-Bit AMD Prozessor "spendiert" habe, läuft allerdings kvdr nicht mehr. Es startet, ich kann auch Kanäle umstellen, sehe aber kein Bild. VDR läuft, und wenn ich vdr runterfahre, dann kann ich auch mit kaffeine Fernseh schauen, d.h. die DVB-Treiber funktionieren unter 64 Bit. Ich habe mir aich schon von der Homepage von kvdr die aktuelle Version 0.63 runtergeladen und kompiliert, allerdings ohne Erfolg. Ich sehe immer noch nur einen schwarzen Bildschirm. Ein Rechteproblem schließe ich aus, denn mit anderen Programmen funktioniert ja der Zugriff auf DVB... Weiß vielleicht irgendjemand eine Lösung, wie ich kvdr auf 64 bit dazu bewegen kann, mir ein Bild anzuzeigen? Meine DVB-Hardware: WinTV Nexus-s Rev. 2.1 (glaube ich zumindest, auf jeden Fall funktionieren die Treiber). AMD Athlon 64 - 3000+
wie startest du dvb,vdr? werden dvb oder vdr als Systemdienste gestartet? was sagt tail -f /var/log/messages? hast du veränderungen unter /etc/sysconfig in Yast vorgenommen? Xawtv geht? MfG
Hallo
wie startest du dvb,vdr? ich starte dvb beim Systemstart bzw. wenn ich es mal neustarten muß (was mittlerweile selten vorkommt) als root mit rcdvb start|stop, dasselbe mit vdr... werden dvb oder vdr als Systemdienste gestartet? was sagt tail -f /var/log/messages? Bei DVB-Start: Aug 25 22:13:54 pc1 kernel: saa7146: unregister extension 'dvb'. Aug 25 22:13:58 pc1 kernel: saa7146: register extension 'dvb'. Aug 25 22:13:58 pc1 kernel: ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 217 Aug 25 22:13:58 pc1 kernel: saa7146: found saa7146 @ mem ffffc20000752000 (revision 1, irq 217) (0x13c2,0x0003). Aug 25 22:13:58 pc1 udevd[2256]: move seq 1125 with timeout 10 to exec queue Aug 25 22:13:58 pc1 udevd[2256]: move seq 1126 with timeout 10 to exec queue Aug 25 22:13:58 pc1 kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). Aug 25 22:13:58 pc1 kernel: adapter has MAC addr = 00:d0:5c:21:d7:d2 Aug 25 22:13:59 pc1 kernel: dvb-ttpci: gpioirq unknown type=0 len=0 Aug 25 22:13:59 pc1 kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261c Aug 25 22:13:59 pc1 kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface Aug 25 22:13:59 pc1 kernel: dvb-ttpci: adac type set to 0 @ card 0 Aug 25 22:13:59 pc1 kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] Aug 25 22:13:59 pc1 kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)... Aug 25 22:13:59 pc1 kernel: dvb-ttpci: found av7110-0.
Bei vdr-Start: Aug 25 22:15:02 pc1 vdr[9561]: VDR version 1.2.6 started Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/setup.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/sources.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/diseqc.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/channels.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/svdrphosts.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/ca.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/remote.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/keymacros.conf Aug 25 22:15:02 pc1 vdr[9561]: probing /dev/dvb/adapter0/frontend0 Aug 25 22:15:02 pc1 vdr[9561]: probing /dev/dvb/adapter1/frontend0 Aug 25 22:15:02 pc1 vdr[9561]: found 1 video device Aug 25 22:15:02 pc1 vdr[9561]: SectionsScanner processing thread started (pid=9561) Aug 25 22:15:02 pc1 vdr[9561]: tuner thread started on device 1 (pid=9561) Aug 25 22:15:02 pc1 vdr[9561]: loading ca cache from /etc/vdr/plugins/ca.cache Aug 25 22:15:02 pc1 vdr[9561]: INFO: no smartcard interface defined! Aug 25 22:15:02 pc1 vdr[9561]: setting primary device to 1 Aug 25 22:15:02 pc1 vdr[9561]: SVDRP listening on port 2001 Aug 25 22:15:02 pc1 vdr[9561]: ERROR: /dev/lircd: Permission denied Aug 25 22:15:02 pc1 vdr[9561]: ERROR: remote control LIRC not ready! Aug 25 22:15:02 pc1 vdr[9561]: remote control KBD - keys known Aug 25 22:15:02 pc1 vdr[9561]: switching to channel 1 Aug 25 22:15:02 pc1 vdr[9561]: KBD remote control thread started (pid=9561) Aug 25 22:15:04 pc1 vdr[9561]: reading EPG data from /var/spool/video/epg.data
hast du veränderungen unter /etc/sysconfig in Yast vorgenommen? nicht daß ich wüßte, zumindest nicht, was dvb und vdr angeht Xawtv geht? Ja, funktioniert...
Die zwei Fehler, daß lircd nicht geht, waren schon vorher beim alten PC zu sehen, kvdr hat aber trotzdem funktioniert... es liegt einfach daran, daß ich keine Fernbedienung habe und lircd nicht gestartet ist... Tim Fischer -- Tim Fischer
Hallo, Am Donnerstag, 25. August 2005 22:23 schrieb Tim Fischer:
Am Donnerstag, 25. August 2005 15:06 schrieb Norbert Vohwinkel:
wie startest du dvb,vdr?
ich starte dvb beim Systemstart bzw. wenn ich es mal neustarten muß (was mittlerweile selten vorkommt) als root mit rcdvb start|stop, dasselbe mit vdr...
werden dvb oder vdr als Systemdienste gestartet? was sagt tail -f /var/log/messages?
Bei DVB-Start: Aug 25 22:13:54 pc1 kernel: saa7146: unregister extension 'dvb'. Aug 25 22:13:58 pc1 kernel: saa7146: register extension 'dvb'. Aug 25 22:13:58 pc1 kernel: ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 19 (level, low) -> IRQ 217 Aug 25 22:13:58 pc1 kernel: saa7146: found saa7146 @ mem ffffc20000752000 (revision 1, irq 217) (0x13c2,0x0003). Aug 25 22:13:58 pc1 udevd[2256]: move seq 1125 with timeout 10 to exec queue Aug 25 22:13:58 pc1 udevd[2256]: move seq 1126 with timeout 10 to exec queue Aug 25 22:13:58 pc1 kernel: DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-S rev2.X). Aug 25 22:13:58 pc1 kernel: adapter has MAC addr = 00:d0:5c:21:d7:d2 Aug 25 22:13:59 pc1 kernel: dvb-ttpci: gpioirq unknown type=0 len=0 Aug 25 22:13:59 pc1 kernel: dvb-ttpci: info @ card 0: firm f0240009, rtsl b0250018, vid 71010068, app 8000261c Aug 25 22:13:59 pc1 kernel: dvb-ttpci: firmware @ card 0 supports CI link layer interface Aug 25 22:13:59 pc1 kernel: dvb-ttpci: adac type set to 0 @ card 0 Aug 25 22:13:59 pc1 kernel: saa7146_vv: saa7146 (0): registered device video0 [v4l2] Aug 25 22:13:59 pc1 kernel: DVB: registering frontend 0 (ST STV0299 DVB-S)... Aug 25 22:13:59 pc1 kernel: dvb-ttpci: found av7110-0.
Bei vdr-Start: Aug 25 22:15:02 pc1 vdr[9561]: VDR version 1.2.6 started Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/setup.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/sources.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/diseqc.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/channels.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/svdrphosts.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/ca.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/remote.conf Aug 25 22:15:02 pc1 vdr[9561]: loading /etc/vdr/keymacros.conf Aug 25 22:15:02 pc1 vdr[9561]: probing /dev/dvb/adapter0/frontend0 Aug 25 22:15:02 pc1 vdr[9561]: probing /dev/dvb/adapter1/frontend0 Aug 25 22:15:02 pc1 vdr[9561]: found 1 video device Aug 25 22:15:02 pc1 vdr[9561]: SectionsScanner processing thread started (pid=9561) Aug 25 22:15:02 pc1 vdr[9561]: tuner thread started on device 1 (pid=9561) Aug 25 22:15:02 pc1 vdr[9561]: loading ca cache from /etc/vdr/plugins/ca.cache Aug 25 22:15:02 pc1 vdr[9561]: INFO: no smartcard interface defined! Aug 25 22:15:02 pc1 vdr[9561]: setting primary device to 1 Aug 25 22:15:02 pc1 vdr[9561]: SVDRP listening on port 2001 Aug 25 22:15:02 pc1 vdr[9561]: ERROR: /dev/lircd: Permission denied Aug 25 22:15:02 pc1 vdr[9561]: ERROR: remote control LIRC not ready! Aug 25 22:15:02 pc1 vdr[9561]: remote control KBD - keys known Aug 25 22:15:02 pc1 vdr[9561]: switching to channel 1 Aug 25 22:15:02 pc1 vdr[9561]: KBD remote control thread started (pid=9561) Aug 25 22:15:04 pc1 vdr[9561]: reading EPG data from /var/spool/video/epg.data
ist so in Ordnung,
hast du veränderungen unter /etc/sysconfig in Yast vorgenommen?
nicht daß ich wüßte, zumindest nicht, was dvb und vdr angeht
Xawtv geht?
Ja, funktioniert...
Die zwei Fehler, daß lircd nicht geht, waren schon vorher beim alten PC zu sehen, kvdr hat aber trotzdem funktioniert... es liegt einfach daran, daß ich keine Fernbedienung habe und lircd nicht gestartet ist...
Ja, das stimmt Hat kvdr Zugriff auf /var/spool/video? Video sollte auf Benutzer "vdr" und Gruppe "video" stehen. Ist Video vielleicht auf eine ganze Festplatte ausgelagert worden? Wenn du rcdvb stop eingibst, kommt dann eine Meldung wie konnte Modul xyz nicht entladen? Nimm doch mal DVB und VDR aus dem Systemstart heraus. Überprüfe jeweils nach einem Neustart ob DVB wirklich inaktiv ist! Starte manuell mit rcdvb start und rcvdr start. Wenn Kvdr nicht mit Bild startet und ein rcdvb stop Fehlermeldungen wie oben beschrieben erzeugt, musst du das DVB Modul mal in die /etc/sysconfig eintragen. Also z.B. mit Yast unter /System/Hardware/DVB/DVB_LOAD_MODULES/===>dvb-ttpci. MfG
Am Freitag, 26. August 2005 10:46 schrieb Norbert Vohwinkel:
Hat kvdr Zugriff auf /var/spool/video? Video sollte auf Benutzer "vdr" und Gruppe "video" stehen. Ist Video vielleicht auf eine ganze Festplatte ausgelagert worden?
Die Berechtigungen stimmen, und Video liegt auf der selben Festplatte (es gibt nur eine).
Wenn du rcdvb stop eingibst, kommt dann eine Meldung wie konnte Modul xyz nicht entladen?
Ja, die Meldungen kommen, aber das ist nicht wirklich das Problem, denn die kam unter dem alten PC auch. Ich habe es aber trotzdem mal probiert nach deiner Methode, leider völlig ohne Erfolg. Ich bekomme immer noch beim Start von kvdr folgende Meldung: VIDIOCSWIN: Ungültige Adresse Das Bild bleibt schwarz, der Ton kommt, ich kann sogar Kanäle wechseln (ich weiß die Tastenkombination schon auswendig). Aber Fernsehen nur mit Ton ? :-(
Gruß Tim Fischer -- Tim Fischer
participants (3)
-
Norbert Vohwinkel
-
Richard Kraut
-
Tim Fischer