Hallo, ich bekomme meine Webcam nicht zum laufen. Wenn der Rechner bootet sieht es so aus als wenn die Kamera gefunden wurde: usb5: SerialNumber: 0000:00:10.3 usb usb5: configuration #1 chosen from 1 choice usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: new device found, idVendor=0a12, idProduct=0001 usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-2: configuration #1 chosen from 1 choice usb 3-1: USB disconnect, address 2 usb 3-1: new full speed USB device using uhci_hcd and address 4 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new driver gspca usbcore: registered new driver hci_usb usb 3-1: USB disconnect, address 4 /usr/src/gspcav1-20071224/gspca_core.c: init isoc: usb_submit_urb(0) ret -19 usb 3-1: new full speed USB device using uhci_hcd and address 5 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usb 3-1: USB disconnect, address 5 /usr/src/gspcav1-20071224/gspca_core.c: init isoc: usb_submit_urb(0) ret -19 usb 3-1: new full speed USB device using uhci_hcd and address 6 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usb 3-1: USB disconnect, address 6 /usr/src/gspcav1-20071224/gspca_core.c: init isoc: usb_submit_urb(0) ret -19 usb 3-1: new full speed USB device using uhci_hcd and address 7 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice ------------------------------------------------------------------------ Technische Daten: Philips Webcam spc200 nc Bus 003 Device 007: ID 0471:0325 Philips Rechner mit USB 2.0 Schnittstelle OpenSUSE 10.2 32bit Kernel 2.6.18.8-0.7-default ------------------------------------------------------------------------ Ich habe mir von der Seite http://mxhaard.free.fr/spca5xx.html das Kernel modul runtergeladen und compiliert , installiert. gspca 675920 0 videodev 26880 1 gspca usbcore 128516 5 hci_usb,gspca,uhci_hcd,ehci_hcd Kann mir jemand einen Tip geben, wo der Fehler liegt ? Gruss HG --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Am Montag Januar 14 2008 schrieb HGB:
Hallo,
ich bekomme meine Webcam nicht zum laufen. Wenn der Rechner bootet sieht es so aus als wenn die Kamera gefunden wurde:
usb5: SerialNumber: 0000:00:10.3 usb usb5: configuration #1 chosen from 1 choice usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usb 3-2: new full speed USB device using uhci_hcd and address 3 usb 3-2: new device found, idVendor=0a12, idProduct=0001 usb 3-2: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 3-2: configuration #1 chosen from 1 choice usb 3-1: USB disconnect, address 2 usb 3-1: new full speed USB device using uhci_hcd and address 4 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usbcore: registered new driver gspca usbcore: registered new driver hci_usb usb 3-1: USB disconnect, address 4 /usr/src/gspcav1-20071224/gspca_core.c: init isoc: usb_submit_urb(0) ret -19 usb 3-1: new full speed USB device using uhci_hcd and address 5 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usb 3-1: USB disconnect, address 5 /usr/src/gspcav1-20071224/gspca_core.c: init isoc: usb_submit_urb(0) ret -19 usb 3-1: new full speed USB device using uhci_hcd and address 6 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice usb 3-1: USB disconnect, address 6 /usr/src/gspcav1-20071224/gspca_core.c: init isoc: usb_submit_urb(0) ret -19 usb 3-1: new full speed USB device using uhci_hcd and address 7 usb 3-1: new device found, idVendor=0471, idProduct=0325 usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: SPC 200NC usb 3-1: Manufacturer: Philips usb 3-1: configuration #1 chosen from 1 choice
------------------------------------------------------------------------
Technische Daten:
Philips Webcam spc200 nc Bus 003 Device 007: ID 0471:0325 Philips
Rechner mit USB 2.0 Schnittstelle OpenSUSE 10.2 32bit Kernel 2.6.18.8-0.7-default
------------------------------------------------------------------------
Ich habe mir von der Seite http://mxhaard.free.fr/spca5xx.html das Kernel modul runtergeladen und compiliert , installiert.
gspca 675920 0 videodev 26880 1 gspca usbcore 128516 5 hci_usb,gspca,uhci_hcd,ehci_hcd
Kann mir jemand einen Tip geben, wo der Fehler liegt ? Was zeigt lsmod in einer Console. ? Viele Grüße, Heinz Dittmar
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Was zeigt lsmod in einer Console. ? Viele Grüße, Heinz Dittmar
18:04 yarvin:~ # lsmod Module Size Used by appletalk 43948 2 ax25 64720 2 ipx 35876 2 p8023 6272 1 ipx xt_pkttype 6016 3 ipt_LOG 10624 9 xt_limit 6912 9 af_packet 29320 0 tmdc 10624 0 joydev 13504 0 vmnet 45868 13 vmmon 114252 0 snd_pcm_oss 53376 0 snd_mixer_oss 21248 1 snd_pcm_oss snd_seq 60272 0 button 10896 0 battery 14468 0 ac 9476 0 ip6t_REJECT 9344 3 xt_tcpudp 7296 5 ipt_REJECT 9472 3 xt_state 6272 12 iptable_mangle 7040 0 iptable_nat 11652 0 ip_nat 21932 1 iptable_nat iptable_filter 7168 1 ip6table_mangle 6528 0 ip_conntrack 53088 3 xt_state,iptable_nat,ip_nat nfnetlink 11032 2 ip_nat,ip_conntrack ip_tables 17604 3 iptable_mangle,iptable_nat,iptable_filter ip6table_filter 7040 1 ip6_tables 18756 2 ip6table_mangle,ip6table_filter x_tables 18180 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables ipv6 264096 29 ip6t_REJECT apparmor 55572 0 aamatch_pcre 18304 1 apparmor loop 20488 0 dm_mod 60568 0 rfcomm 45208 6 hidp 23680 2 l2cap 31104 10 rfcomm,hidp hci_usb 20764 6 bluetooth 57188 16 rfcomm,hidp,l2cap,hci_usb gspca 675920 0 videodev 26880 1 gspca v4l1_compat 16388 1 videodev v4l2_common 26240 1 videodev snd_via82xx 32920 2 snd_ac97_codec 95648 1 snd_via82xx snd_ac97_bus 6400 1 snd_ac97_codec snd_hda_intel 23060 0 snd_hda_codec 164352 1 snd_hda_intel snd_mpu401_uart 13056 1 snd_via82xx snd_rawmidi 29824 1 snd_mpu401_uart snd_seq_device 12812 2 snd_seq,snd_rawmidi snd_pcm 86916 5 snd_pcm_oss,snd_via82xx,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_timer 27908 2 snd_seq,snd_pcm snd_page_alloc 14984 3 snd_via82xx,snd_hda_intel,snd_pcm ide_cd 42272 0 cdrom 38432 1 ide_cd via_rhine 28680 0 snd 61316 16 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer fglrx 670844 15 mii 9600 1 via_rhine soundcore 13792 1 snd via_agp 14080 1 uhci_hcd 26892 0 ehci_hcd 34696 0 agpgart 35528 2 fglrx,via_agp shpchp 40224 0 pci_hotplug 35136 1 shpchp usbcore 128516 5 hci_usb,gspca,uhci_hcd,ehci_hcd ns558 8960 0 gameport 19464 4 tmdc,snd_via82xx,ns558 parport_pc 42084 1 lp 15652 0 parport 39752 2 parport_pc,lp ext3 141192 2 mbcache 12804 1 ext3 jbd 70324 1 ext3 edd 14020 0 fan 9092 0 via82cxxx 12804 0 [permanent] thermal 18568 0 processor 34664 1 thermal ide_disk 20480 5 ide_core 130504 3 ide_cd,via82cxxx,ide_disk --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Hallo, ist hier noch jemand ? HGB schrieb:
Was zeigt lsmod in einer Console. ? Viele Grüße, Heinz Dittmar
18:04 yarvin:~ # lsmod Module Size Used by appletalk 43948 2 ax25 64720 2 ipx 35876 2 p8023 6272 1 ipx xt_pkttype 6016 3 ipt_LOG 10624 9 xt_limit 6912 9 af_packet 29320 0 tmdc 10624 0 joydev 13504 0 vmnet 45868 13 vmmon 114252 0 snd_pcm_oss 53376 0 snd_mixer_oss 21248 1 snd_pcm_oss snd_seq 60272 0 button 10896 0 battery 14468 0 ac 9476 0 ip6t_REJECT 9344 3 xt_tcpudp 7296 5 ipt_REJECT 9472 3 xt_state 6272 12 iptable_mangle 7040 0 iptable_nat 11652 0 ip_nat 21932 1 iptable_nat iptable_filter 7168 1 ip6table_mangle 6528 0 ip_conntrack 53088 3 xt_state,iptable_nat,ip_nat nfnetlink 11032 2 ip_nat,ip_conntrack ip_tables 17604 3 iptable_mangle,iptable_nat,iptable_filter ip6table_filter 7040 1 ip6_tables 18756 2 ip6table_mangle,ip6table_filter x_tables 18180 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,iptable_nat,ip_tables,ip6_tables ipv6 264096 29 ip6t_REJECT apparmor 55572 0 aamatch_pcre 18304 1 apparmor loop 20488 0 dm_mod 60568 0 rfcomm 45208 6 hidp 23680 2 l2cap 31104 10 rfcomm,hidp hci_usb 20764 6 bluetooth 57188 16 rfcomm,hidp,l2cap,hci_usb gspca 675920 0 videodev 26880 1 gspca v4l1_compat 16388 1 videodev v4l2_common 26240 1 videodev snd_via82xx 32920 2 snd_ac97_codec 95648 1 snd_via82xx snd_ac97_bus 6400 1 snd_ac97_codec snd_hda_intel 23060 0 snd_hda_codec 164352 1 snd_hda_intel snd_mpu401_uart 13056 1 snd_via82xx snd_rawmidi 29824 1 snd_mpu401_uart snd_seq_device 12812 2 snd_seq,snd_rawmidi snd_pcm 86916 5 snd_pcm_oss,snd_via82xx,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_timer 27908 2 snd_seq,snd_pcm snd_page_alloc 14984 3 snd_via82xx,snd_hda_intel,snd_pcm ide_cd 42272 0 cdrom 38432 1 ide_cd via_rhine 28680 0 snd 61316 16 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_hda_intel,snd_hda_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer fglrx 670844 15 mii 9600 1 via_rhine soundcore 13792 1 snd via_agp 14080 1 uhci_hcd 26892 0 ehci_hcd 34696 0 agpgart 35528 2 fglrx,via_agp shpchp 40224 0 pci_hotplug 35136 1 shpchp usbcore 128516 5 hci_usb,gspca,uhci_hcd,ehci_hcd ns558 8960 0 gameport 19464 4 tmdc,snd_via82xx,ns558 parport_pc 42084 1 lp 15652 0 parport 39752 2 parport_pc,lp ext3 141192 2 mbcache 12804 1 ext3 jbd 70324 1 ext3 edd 14020 0 fan 9092 0 via82cxxx 12804 0 [permanent] thermal 18568 0 processor 34664 1 thermal ide_disk 20480 5 ide_core 130504 3 ide_cd,via82cxxx,ide_disk --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Hallo! Am 17.01.2008 um 17:56 Uhr schrieb HGB:
ist hier noch jemand ?
Ja - einige auf jeden Fall :-) Nach deinen bisherigen Infos sollte deine Webcam eigentlich arbeiten. Darum wiederhole und ergänze ich meine Frage: Existiert das Device /dev/vid* ? Wenn ja, welches Programm hast du mit welchen Einstellungen benutzt, kurz: woran merkst du, dass die Webcam nicht funktioniert? cu Peter --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Am Donnerstag Januar 17 2008 schrieb HGB:
Hallo,
ist hier noch jemand ? Verzeihung, war gestern unterwegs.
HGB schrieb:
Was zeigt lsmod in einer Console. ? Viele Grüße, Heinz Dittmar
18:04 yarvin:~ # lsmod Module Size Used by appletalk 43948 2 ax25 64720 2 ipx 35876 2 p8023 6272 1 ipx xt_pkttype 6016 3 ipt_LOG 10624 9 xt_limit 6912 9 af_packet 29320 0 tmdc 10624 0 joydev 13504 0 vmnet 45868 13 vmmon 114252 0 snd_pcm_oss 53376 0 snd_mixer_oss 21248 1 snd_pcm_oss snd_seq 60272 0 button 10896 0 battery 14468 0 ac 9476 0 ip6t_REJECT 9344 3 xt_tcpudp 7296 5 ipt_REJECT 9472 3 xt_state 6272 12 iptable_mangle 7040 0 iptable_nat 11652 0 ip_nat 21932 1 iptable_nat iptable_filter 7168 1 ip6table_mangle 6528 0 ip_conntrack 53088 3 xt_state,iptable_nat,ip_nat nfnetlink 11032 2 ip_nat,ip_conntrack ip_tables 17604 3 iptable_mangle,iptable_nat,iptable_filter ip6table_filter 7040 1 ip6_tables 18756 2 ip6table_mangle,ip6table_filter x_tables 18180 10 xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_tcpudp,ipt_REJECT,xt_state,ipt able_nat,ip_tables,ip6_tables ipv6 264096 29 ip6t_REJECT apparmor 55572 0 aamatch_pcre 18304 1 apparmor loop 20488 0 dm_mod 60568 0 rfcomm 45208 6 hidp 23680 2 l2cap 31104 10 rfcomm,hidp hci_usb 20764 6 bluetooth 57188 16 rfcomm,hidp,l2cap,hci_usb gspca 675920 0 videodev 26880 1 gspca v4l1_compat 16388 1 videodev v4l2_common 26240 1 videodev snd_via82xx 32920 2 snd_ac97_codec 95648 1 snd_via82xx snd_ac97_bus 6400 1 snd_ac97_codec snd_hda_intel 23060 0 snd_hda_codec 164352 1 snd_hda_intel snd_mpu401_uart 13056 1 snd_via82xx snd_rawmidi 29824 1 snd_mpu401_uart snd_seq_device 12812 2 snd_seq,snd_rawmidi snd_pcm 86916 5 snd_pcm_oss,snd_via82xx,snd_ac97_codec,snd_hda_intel,snd_hda_codec snd_timer 27908 2 snd_seq,snd_pcm snd_page_alloc 14984 3 snd_via82xx,snd_hda_intel,snd_pcm ide_cd 42272 0 cdrom 38432 1 ide_cd via_rhine 28680 0 snd 61316 16 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_via82xx,snd_ac97_codec,snd_hda_inte l,snd_hda_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_tim er fglrx 670844 15 mii 9600 1 via_rhine soundcore 13792 1 snd via_agp 14080 1 uhci_hcd 26892 0 ehci_hcd 34696 0 agpgart 35528 2 fglrx,via_agp shpchp 40224 0 pci_hotplug 35136 1 shpchp usbcore 128516 5 hci_usb,gspca,uhci_hcd,ehci_hcd ns558 8960 0 gameport 19464 4 tmdc,snd_via82xx,ns558 parport_pc 42084 1 lp 15652 0 parport 39752 2 parport_pc,lp ext3 141192 2 mbcache 12804 1 ext3 jbd 70324 1 ext3 edd 14020 0 fan 9092 0 via82cxxx 12804 0 [permanent] thermal 18568 0 processor 34664 1 thermal ide_disk 20480 5 ide_core 130504 3 ide_cd,via82cxxx,ide_disk Versuche mal anstatt gspca pwc zu verwenden. Viele Grüße, Heinz Dittmar
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Versuche mal anstatt gspca pwc zu verwenden. Viele Grüße, Heinz Dittmar
Ich glaube nicht das es mit pwc funktionieren wird, ------------------------------------------------------- As of this moment, the following cameras are supported: * Philips PCA645 * Philips PCA646 * Philips PCVC675 * Philips PCVC680 * Philips PCVC690 * Philips PCVC720/40 * Philips PCVC730 * Philips PCVC740 * Philips PCVC750 * Askey VC010 * Creative Labs Webcam 5 * Creative Labs Webcam Pro Ex * Logitech QuickCam 3000 Pro * Logitech QuickCam 4000 Pro * Logitech QuickCam Notebook Pro * Logitech QuickCam Zoom * Logitech QuickCam Orbit * Logitech QuickCam Sphere * Samsung MPC-C10 * Samsung MPC-C30 * Sotec Afina Eye * AME CU-001 * Visionite VCS-UM100 * Visionite VCS-UC300 ------------------------------------------------------- Die Kamera die ich nutzen möchte heisst Philips spc200nc, die ist neuer als die in der Liste aufgeführten. Die Kamera scheint ja wohl gefunden worden zu sein. 17:34 yarvin:~ # lsmod |grep spc gspca 675981 1 videodev 26880 1 gspca usbcore 128516 4 gspca,ehci_hcd,uhci_hcd Wie sieht es mit der v4l , v4l2 Unterstützung des Defaultkernels von OS 10.2 aus ? Könnte dort das Problem liegen ? Gruss HG --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Am Freitag Januar 18 2008 schrieb HGB:
Versuche mal anstatt gspca pwc zu verwenden. Viele Grüße, Heinz Dittmar
Ich glaube nicht das es mit pwc funktionieren wird,
------------------------------------------------------- As of this moment, the following cameras are supported: * Philips PCA645 * Philips PCA646 * Philips PCVC675 * Philips PCVC680 * Philips PCVC690 * Philips PCVC720/40 * Philips PCVC730 * Philips PCVC740 * Philips PCVC750 * Askey VC010 * Creative Labs Webcam 5 * Creative Labs Webcam Pro Ex * Logitech QuickCam 3000 Pro * Logitech QuickCam 4000 Pro * Logitech QuickCam Notebook Pro * Logitech QuickCam Zoom * Logitech QuickCam Orbit * Logitech QuickCam Sphere * Samsung MPC-C10 * Samsung MPC-C30 * Sotec Afina Eye * AME CU-001 * Visionite VCS-UM100 * Visionite VCS-UC300 ------------------------------------------------------- Die Kamera die ich nutzen möchte heisst Philips spc200nc, die ist neuer als die in der Liste aufgeführten.
Die Kamera scheint ja wohl gefunden worden zu sein. 17:34 yarvin:~ # lsmod |grep spc gspca 675981 1 videodev 26880 1 gspca usbcore 128516 4 gspca,ehci_hcd,uhci_hcd
Wie sieht es mit der v4l , v4l2 Unterstützung des Defaultkernels von OS 10.2 aus ? Könnte dort das Problem liegen ? Glaube ich weniger. Welche Kamera unterstützt den qspca, gibt es eine Dokumentation bei den Kernelsourcen, wird die Kamera von dem modul unterstützt. Ist /dev/video und /dev/video0 vorhanden, wohin zeigt der Link von /dev/video Viele Grüße, Heinz Dittmar
To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Glaube ich weniger. Welche Kamera unterstützt den qspca, gibt es eine Dokumentation bei den Kernelsourcen, wird die Kamera von dem modul unterstützt.
Ja http://mxhaard.free.fr/spca5xx.html Lass nach NPC200NC suchen. Ok zumindestens laut Webseite.
Ist /dev/video und /dev/video0 vorhanden, wohin zeigt der Link von /dev/video
19:28 yarvin:/dev # ls -al vid* lrwxrwxrwx 1 root root 11 Jul 18 18:28 video -> /dev/video0 crw-rw-rw- 1 root root 81, 0 Jul 18 18:23 video0 crw-rw-rw- 1 root root 81, 1 Jul 18 18:23 video1 crw-rw-rw- 1 root root 81, 2 Jul 18 18:24 video2
Viele Grüße, Heinz Dittmar
Gruss HG --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Am Freitag Januar 18 2008 schrieb HGB:
Glaube ich weniger. Welche Kamera unterstützt den qspca, gibt es eine Dokumentation bei den Kernelsourcen, wird die Kamera von dem modul unterstützt.
Ja http://mxhaard.free.fr/spca5xx.html Lass nach NPC200NC suchen. Ok zumindestens laut Webseite.
Ist /dev/video und /dev/video0 vorhanden, wohin zeigt der Link von /dev/video
19:28 yarvin:/dev # ls -al vid* lrwxrwxrwx 1 root root 11 Jul 18 18:28 video -> /dev/video0 crw-rw-rw- 1 root root 81, 0 Jul 18 18:23 video0 crw-rw-rw- 1 root root 81, 1 Jul 18 18:23 video1 crw-rw-rw- 1 root root 81, 2 Jul 18 18:24 video2 Versuche mal in einer Konsole "xawtv4" zu starten, und dann versuchen auf die Webkamera einzustellen. Wenn das nicht geht, liegt es am Treiber. Ich habe inzwischen was im Web gefunden, daß es angeblich mit den module spca5xx,saa7134 funktionieren sollte. Viele Grüße, Heinz Dittmar
--------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Am Freitag Januar 18 2008 schrieb HGB:
Glaube ich weniger. Welche Kamera unterstützt den qspca, gibt es eine Dokumentation bei den Kernelsourcen, wird die Kamera von dem modul unterstützt.
Ja http://mxhaard.free.fr/spca5xx.html Lass nach NPC200NC suchen. Ok zumindestens laut Webseite.
Ist /dev/video und /dev/video0 vorhanden, wohin zeigt der Link von /dev/video
19:28 yarvin:/dev # ls -al vid* lrwxrwxrwx 1 root root 11 Jul 18 18:28 video -> /dev/video0 crw-rw-rw- 1 root root 81, 0 Jul 18 18:23 video0 crw-rw-rw- 1 root root 81, 1 Jul 18 18:23 video1 crw-rw-rw- 1 root root 81, 2 Jul 18 18:24 video2 Habe noch einen Thread gefunden. : http://lists.opensuse.org/opensuse-multimedia-de/2005-11/msg00036.html Viele Grüße, Heinz Dittmar
To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
18:07 yarvin:/usr/src/spcaview-20071224 # spcaview Spcaview version: 1.1.8 date: 25:12:2007 (C) mxhaard@magic.fr Initializing SDL. SDL initialized. bpp 3 format 15 Using video device /dev/video0. Initializing v4l. ERROR opening V4L interface : No such file or directory Ok, was meinst Du zu der Fehlermeldung ? --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Am Freitag Januar 18 2008 schrieb HGB:
18:07 yarvin:/usr/src/spcaview-20071224 # spcaview Spcaview version: 1.1.8 date: 25:12:2007 (C) mxhaard@magic.fr Initializing SDL. SDL initialized. bpp 3 format 15 Using video device /dev/video0. Initializing v4l. ERROR opening V4L interface
: No such file or directory
Ok, was meinst Du zu der Fehlermeldung ? Was zeigt ein ls -l /dev/video* Wenn die nicht vorhanden sind, gibt es ein Problem mit dem Kernelmodul, vielleicht wird die Kamera von dem qspca nicht unterstützt. Das mit pwc ist ein anderes Modul das viele Philipskamera unterstützt. Vielleicht soltest du mal nach der neuesten Version ausschau halten. Schau auch mal bei den Kernelsourcen auschau ob du da was findest. Viele Grüße, Heinz Dittmar
To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
Hallo! Am 14.01.2008 um 17:55 Uhr schrieb HGB:
Technische Daten:
Philips Webcam spc200 nc Bus 003 Device 007: ID 0471:0325 Philips
Rechner mit USB 2.0 Schnittstelle OpenSUSE 10.2 32bit Kernel 2.6.18.8-0.7-default
------------------------------------------------------------------------
Ich habe mir von der Seite http://mxhaard.free.fr/spca5xx.html das Kernel modul runtergeladen und compiliert , installiert.
gspca 675920 0 videodev 26880 1 gspca usbcore 128516 5 hci_usb,gspca,uhci_hcd,ehci_hcd
Wie kommst du darauf, dass sie nicht funktioniert? Sprich: Welches Programm startest du zum Bilder anschauen mit welchen Parametern? cu Peter --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-multimedia-de+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-multimedia-de+help@opensuse.org
participants (3)
-
Heinz Dittmar
-
HGB
-
Peter Geerds