Hallo Leute, ich komme einfach nicht weiter. Ich habe hier einen dv-Film vom Camcorder aufgenommen und exportiere ihn als DVD-Film vom 4GB Größe. Der mplex-Befehl ist standartmäßig in Kino: mplex -v 0 Leider verschiebt mplex den Ton etwas nach hinten. Im Original sind Ton und Video syncron. Auch das "von Hand" mplexen nach dem Export erzielt kein besseres Ergebnis. Nun habe ich es mal mit tcmplex versucht, was auch nicht viel besser ist. Ich erhalte folgende Ausgabe: manfred@PC1A:/data3/ae_daten_auf3/cam/DVD-temp> tcmplex -p 2005.01.-Tignes1.mpeg.mp2 -i 2005.01.-Tignes1.mpeg.mpv -o 2005.01.-Tignes1.mpeg INFO: using reference profile (MPEG1) INFO: profile type is (PAL) INFO: INFO: Scanning video stream for a sequence header ... INFO: INFO: Scanning video stream for pictures ... *** Scanning video stream: 99% - byte offset 4039390392 of 4080192279. (99)% INFO: Found 129890 picture headers, stream bit offset 32641538232. INFO: Video stream information INFO: Stream length : 4080192279 INFO: Total time (seconds) : 5195 INFO: Sequence start : 8874 INFO: Sequence end : 1 INFO: No. Pictures : 129890 INFO: No. Groups : 8874 INFO: No. I Frames : 8874 avg. size 40201 bytes INFO: No. P Frames : 121016 avg. size 30768 bytes INFO: No. B Frames : 0 avg. size 0 bytes INFO: No. D Frames : 0 avg. size 0 bytes INFO: Horizontal size : 720 INFO: Vertical size : 576 INFO: Aspect ratio : 0.6735 INFO: Picture rate : 25.000 frames/sec INFO: Bit rate : 937500 bytes/sec (7500000 bits/sec) INFO: Computed avg rate : 786250 bytes/sec (6290000 bits/sec) INFO: Computed max rate : 1033800 bytes/sec (8270400 bits/sec) INFO: Vbv buffer size : 229376 bytes INFO: CSPF : 0 INFO: INFO: Scanning audio stream for access units information ThOe: layer=1 bit_rate=192 freq=48.000000 slots=144 *** Scanning audio stream: 99% - byte offset 123459844 of 124706881. (99)% INFO: Found 216505 audio frame headers, stream bit offset 997655040. INFO: MPEG audio stream information INFO: Stream length : 124706880 INFO: Syncwords : 216505 INFO: Frames : 216505 size 576 bytes INFO: Frames : 0 size 577 bytes INFO: Layer : 2 INFO: CRC checksums : no INFO: Bit rate : 24000 bytes/sec (192 kbit/sec) INFO: Frequency : 48.0 kHz INFO: Mode : 0 stereo INFO: Mode extension : 0 INFO: Copyright bit : 0 no copyright INFO: Original/Copy : 0 copy INFO: Emphasis : 0 none INFO: INFO: Multiplexing information INFO: Video stream data rate : 1033800 bytes/sec (8270400 bits/sec) INFO: Audio stream 1 data rate : 24000 bytes/sec (192000 bits/sec) INFO: Overhead data rate : 13850 bytes/sec (110800 bits/sec) INFO: Total data rate : 1071650 bytes/sec (8573200 bits/sec) INFO: INFO: Multiplexing file 2005.01.-Tignes1.mpeg *** Multiplexing: 42% - 145488 of 346396 A/V units. (42)% INFO: video DTS (2218500.00ms) underflow at pack 806747 by 5.42ms INFO: video DTS (2218540.00ms) underflow at pack 806763 by 0.12ms INFO: video DTS (2219700.00ms) underflow at pack 807251 by 2.81ms *** Multiplexing: 65% - 225160 of 346396 A/V units. (65)% INFO: video DTS (3391300.00ms) underflow at pack 1211077 by 5.86ms INFO: video DTS (3391340.00ms) underflow at pack 1211108 by 33.10ms INFO: video DTS (3391380.00ms) underflow at pack 1211126 by 32.14ms INFO: video DTS (3391420.00ms) underflow at pack 1211137 by 16.00ms INFO: video DTS (3391460.00ms) underflow at pack 1211156 by 17.22ms INFO: video DTS (3391500.00ms) underflow at pack 1211168 by 3.24ms *** Multiplexing: 66% - 228622 of 346396 A/V units. (66)% INFO: video DTS (3472340.00ms) underflow at pack 1244046 by 7.07ms INFO: video DTS (3472380.00ms) underflow at pack 1244067 by 12.62ms INFO: video DTS (3472420.00ms) underflow at pack 1244084 by 9.50ms INFO: video DTS (3472460.00ms) underflow at pack 1244099 by 2.03ms *** Multiplexing: 99% - 342933 of 346396 A/V units. (99)% INFO: 13 video underflows (SCR >= PTS or DTS) INFO: INFO: NOTE: The resulting file may not play back correctly. INFO: Try increasing the mux rate. INFO: Finished multiplexing 2005.01.-Tignes1.mpeg *** Multiplexing: 100% - 346396 of 346396 A/V units. (100)% tcmplex sagt mir hier zwar einiges mit "underlow" und dass ich die mux rate erhöhen soll, aber ich steige nicht dahinter wie und wieviel. Wer weiß Rat? -- Gruß Manfred ------------------- SuSE9.3 --- KDE 3.4.2 Level "a" Kernel 2.6.11.4-21.7-default --- Maschine i686