![](https://seccdn.libravatar.org/avatar/55cc4607fb5ee6121fa93b23074d347d.jpg?s=120&d=mm&r=g)
Hallo Liste, mein Prob scheint mit dem cdrdao zusammenzuhängen weil es kein Brennprogie an sich betrifft. Ich kann da nehmen was ich will. Ob nun k3b,xcdroast, Gnomemaster,etc. alle bringen eine ähnliche Meldung. Es scheint das seit meinem letzten update bei Packman die Rohlinge nicht mehr gut genug sind, bis vor kurzem no Problem. Ich habe eine 50er Spindel bei REAL erstanden und 2 von 50 ließen sich brennen. "Platinum" das gleiche,geht nicht. "TDK 800mb" - geht nicht. Nehme ich von der 10 Spindel "Intenso 700mb" klappt das brennen ohne Probleme. Versuche ich Daten mit K3b auf "Platinum 700mb" zu bringen kommt folgende Meldung: ----------------------------------schnipp------------------------ System ----------------------- K3b Version: 0.9 KDE Version: 3.1.1 QT Version: 3.1.1 cdrecord ----------------------- /usr/bin/cdrecord: Warning: not running as root user, fs= option ignored. scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.75-resmgr-patch '@(#)scsi-linux-sg.c 1.75 02/10/21 Copyright 1997 J. Schilling'). Cdrecord 2.00.3 (i686-suse-linux) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'SAMSUNG ' Identifikation : 'CD-R/RW SW-216B ' Revision : 'Q000' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE FORCESPEED Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R Drive buf size : 1359872 = 1328 KB FIFO size : 4194304 = 4096 KB /usr/bin/cdrecord: WARNING: Data may not fit on current disk. /usr/bin/cdrecord: Notice: Overburning active. Trying to write more than the official disk capacity. Track 01: data 729 MB Total size: 838 MB (83:01.76) = 373632 sectors Lout start: 838 MB (83:03/57) = 373632 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 4 Is not unrestricted Is not erasable Disk sub type: Medium Type C, low Beta category (C-) (6) ATIP start of lead in: -11559 (97:27/66) ATIP start of lead out: 359846 (79:59/71) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 21 Manufacturer: Ricoh Company Limited Blocks total: 359846 Blocks current: 359846 Blocks remaining: -13786 Forcespeed is OFF. Starting to write CD/DVD at speed 12 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... /usr/bin/cdrecord: Input/output error. send opc: scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 91 A8 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x91 Qual 0xA8 (vendor unique sense code 0x91) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 14.880s timeout 200s /usr/bin/cdrecord: OPC failed. Writing time: 19.248s BURN-Free was never needed. /usr/bin/cdrecord: fifo had 64 puts and 0 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=0,0,0 speed=12 -dao driveropts=burnfree -eject fs=4m -overburn -data -tsize=373632s - mkisofs ----------------------- 373632 0.14% done, estimate finish Mon Aug 18 22:36:03 2003 0.27% done, estimate finish Mon Aug 18 22:36:03 2003 0.41% done, estimate finish Mon Aug 18 22:36:03 2003 0.54% done, estimate finish Mon Aug 18 22:36:03 2003 mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -V CDROM -volset -A K3B THE CD KREATOR VERSION 0.9 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.9 -sysid LINUX -volset-size 1 -volset-seqno 1 -r -hide-list /tmp/kde-theo/k3bgqErfb.tmp -l -iso-level 2 -path-list /tmp/kde-theo/k3bs6JUOa.tmp ----------------------------------schnapp------------------------------- habe das auch schon an einen der Autoren gesandt aber bekomme keine Rückmeldung. Ich hoffe jemand kann helfen, sind noch über 90 Rohlinge und ich brenne ab und an einiges weg. Gruß -- Theo(Reinhard Selle) Koeln Hiilllfffe!!! ...ich weiß nit weiter :-( , trotz... http://www.suse.de http://www.google.de/linux