Hi. Just installed the 10.3 RC1 on my old Fujitsu/Siemens Lifebook C6155. b4 I used 10.3 Beta3 With that I had my old DLINK DWL-610 wlan pcmcia to work with aid of ndiswrapper: As can bee seen, my dwl-610 is shown as the dwl-510. And the dmesg showed this: Output of dmesg with 10.3 beta3: ndiswrapper version 1.47 loaded (smp=yes) ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded PCI: Enabling device 0000:06:00.0 (0000 -> 0003) PCI: Setting latency timer of device 0000:06:00.0 to 64 ndiswrapper: using IRQ 11 wlan0: ethernet device 00:05:5d:97:d3:0a using NDIS driver: net8180, version: 0x500aa, NDIS version: 0x500, vendor: 'Realtek RTL8180 Wireless LAN (Mini-)PCI NIC ', 1186:3300.5.conf wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA usbcore: registered new interface driver ndiswrapper With the same install under 10.3 RC1 I have this: ndiswrapper version 1.47 loaded (smp=yes) ndiswrapper: driver net8180 (Realtek,10/07/2004,5.173.1007.2004) loaded PCI: Enabling device 0000:06:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:06:00.0 to 64 ndiswrapper (NdisWriteErrorLogEntry:192): log: C0001389, count: 1, return_address: ccb6aaa0 ndiswrapper (NdisWriteErrorLogEntry:195): code: 0x401 ndiswrapper (mp_init:216): couldn't initialize device: C0000001 ndiswrapper (pnp_start_device:439): Windows driver couldn't initialize the device (C0000001) ndiswrapper (mp_halt:258): device c0ef8500 is not initialized - not halting ndiswrapper: device eth%d removed ACPI: PCI interrupt for device 0000:06:00.0 disabled ndiswrapper: probe of 0000:06:00.0 failed with error -22 usbcore: registered new interface driver ndiswrapper ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A What could be the problem, and should I file a bugreprt ? -- Med venlig hilsen / Best regards Erik Jakobsen erik_ja@mail.tele.dk openSuSE 10.2 (i586) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-mobile+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-mobile+help@opensuse.org