9.3 (update) and DELL Latitude C840 (USB - problem)
Hi! In hope for a working suspend-to-RAM I have updated from 9.2 to 9.3 :-( Anyway, now I have some problems, with NIC, scpm, NVIDIA and most important with USB. For the first two problems I have found a workaround, for NVIDIA I use now nv. But for the USB-problem I do not know how to resolve, which means I can not use my USB-mouse anymore. Actually there is no USB-device working at all (USB-stick, camera). It seams that there is no USB-subsystem available. lsusb shows nothing as well as there is no USB-related module available in lsmod. Inserting any kind of USB device does not show any response in /var/log/messages. Loading some of the USB modules manually and inserting a USB-device also shows no response. Indeed grep usb /var/log/boot.omsg gives no output at all! Any hint? Best regards, Michael PS: Of course I have contacted SuSE-installation support, but they claim this is not covered by the installation support. -- michael@karbach.org www.karbach.org
Am Dienstag, 12. April 2005 08:01 schrieb Michael Karbach:
Hi!
In hope for a working suspend-to-RAM I have updated from 9.2 to 9.3 :-(
Anyway, now I have some problems, with NIC, scpm, NVIDIA and most important with USB. For the first two problems I have found a workaround, for NVIDIA I use now nv. But for the USB-problem I do not know how to resolve, which means I can not use my USB-mouse anymore. Actually there is no USB-device working at all (USB-stick, camera). It seams that there is no USB-subsystem available.
lsusb shows nothing as well as there is no USB-related module available in lsmod. Inserting any kind of USB device does not show any response in /var/log/messages. Loading some of the USB modules manually and inserting a USB-device also shows no response.
Trag mal in /etc/sysconfig/kernel unter MODULES_LOADED_ON_BOOT uhci_hcd und ehci_hcd (vielleicht auch noch usbhid) ein. -- Üdvözlettel -- Mit freundlichen Grüssen, Marcel Hilzinger
Hallo Marcel! On Tuesday, 12. April 2005 13:31, Marcel Hilzinger wrote:
Am Dienstag, 12. April 2005 08:01 schrieb Michael Karbach:
Hi!
In hope for a working suspend-to-RAM I have updated from 9.2 to 9.3 :-(
Anyway, now I have some problems, with NIC, scpm, NVIDIA and most important with USB. For the first two problems I have found a workaround, for NVIDIA I use now nv. But for the USB-problem I do not know how to resolve, which means I can not use my USB-mouse anymore. Actually there is no USB-device working at all (USB-stick, camera). It seams that there is no USB-subsystem available.
lsusb shows nothing as well as there is no USB-related module available in lsmod. Inserting any kind of USB device does not show any response in /var/log/messages. Loading some of the USB modules manually and inserting a USB-device also shows no response.
Trag mal in /etc/sysconfig/kernel unter
MODULES_LOADED_ON_BOOT
uhci_hcd
und
ehci_hcd
OK, da ich nicht booten wollte, habe ich diese Module von Hand geladen, und tatsächlich nach uhci_hcd hat es funktioniert. Und in MODULES_LOADED_ON_BOOT stand es nicht. Habe es jetzt dazugefügt und es wird wohl beim nächsten boot, was hoffentlich noch lange dauern wird, funktionieren. Danke! Beste Grüße, Michael -- michael@karbach.org www.karbach.org
participants (2)
-
Marcel Hilzinger
-
Michael Karbach