Hi I've got a Dell Inspiron 8100 laptop and have been using suspend to disk successfully for quite a while. Recently I installed Apache and mysql. Since then suspend to disk sometimes hangs and I *think* it might be only when the mysql daemon is enabled. I've set POWERSAVE_DEBUG to 15 to try and debug. Of course I can't get it to hang now with repeated attempts at suspending. I'm looking for advice on how to debug this. Is there some way that the mysql daemon would prevent suspend to disk from working? Meanwhile, I'll wait until the computer hangs like it normally does on suspend with the mysql daemon running. I've actually got a log with this scenario with POWERSAVE_DEBUG set to 3, which is shown below... Jul 1 07:41:34 jaguar hal.hotplug[19271]: DEVPATH is not set Jul 1 07:41:35 jaguar syslog-ng[3899]: STATS: dropped 0 Jul 1 07:41:37 jaguar kernel: uhci_hcd 0000:00:1f.2: remove, state 1 Jul 1 07:41:37 jaguar kernel: usb usb1: USB disconnect, address 1 Jul 1 07:41:37 jaguar kernel: uhci_hcd 0000:00:1f.2: USB bus 1 deregistered Jul 1 07:41:37 jaguar hald[6671]: Timed out waiting for hotplug event 1168. Rebasing to 1170 Jul 1 07:41:38 jaguar kernel: PM: suspend-to-disk mode set to 'platform' The time out message above does not usually appear on a successful suspend. Earlier when I suspended, it seemed to be going well and I closed the lid and when I looked at the computer again an hour later the computer did not respond to anything but the power light was still on. Looking at the logs seemed to indicate that the lid event was received after the power down had started. I've attached the log (with speed step changes and battery reading messages removed) for those who understand it better, but it seems that it started the screen saver after the suspend to disk had finished!!! I've got kpowersave settings set to 'Only blank the screen' and 'Lock screen on lid close' with 'Lock screen with' 'Select automatically'. I've deselected 'Lock screen on lid close' now, so that this shouldn't happen again. However, perhaps this is a bug which needs looking at. William Jul 1 19:28:12 jaguar [powersave][6553]: Info: ACPI Event happened: button/power PBTN 00000080 00000001 ignore Button because of resume: no Jul 1 19:28:12 jaguar [powersave][6553]: Info: Clients connected, but not for event mode 1. Noone notified. Jul 1 19:28:12 jaguar [powersave][6553]: Info: button power event occured Jul 1 19:28:12 jaguar [powersave][6553]: Info: String: 0.1|2|button.power|-length: 20 Jul 1 19:28:12 jaguar [powersave][6553]: Info: Executing internal action: suspend_to_disk Jul 1 19:28:12 jaguar [powersave][6553]: Info: String: 0.1|2|global.suspend2disk|-length: 27 Jul 1 19:28:12 jaguar [powersave][8797]: Info: Going to execute external action prepare_suspend_to_disk Jul 1 19:28:12 jaguar [powersave][8797]: Info: Program /usr/lib/powersave/scripts/prepare_suspend_to_disk will be executed for event global.suspend2disk! Param 1: global.suspend2disk,Param 2: scheme_powersave Jul 1 19:28:12 jaguar [powersave][6553]: Info: Internal action suspend_to_disk executed Jul 1 19:28:12 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: suspend_to_disk, Return value: 0, Comment: internal action successfull: suspend_to_disk Jul 1 19:28:12 jaguar [powersave][6553]: Info: SCRIPT Event button.power finished successfully Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: DIAG: Process script for event global.suspend2disk ID 28 Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Event: GLOBAL_SUSPEND2DISK occured. Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Parmeters: Event - global.suspend2disk; Current Active Scheme: scheme_powersave - ACPI event line: empty Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Running get_kernels() Jul 1 19:28:12 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 0 Jul 1 19:28:12 jaguar [powersave][6553]: Info: String: 0.1|16|0|-length: 10 Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Default boot entry is '0' Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Found grub menu entry #0: 'title SUSE LINUX 9.3' Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Found kernel entry #0: 'vmlinuz' Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Found grub menu entry #1: 'title Windows' Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Found grub menu entry #2: 'title Floppy' Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Found grub menu entry #3: 'title Failsafe -- SUSE LINUX 9.3' Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Found kernel entry #1: 'vmlinuz' Jul 1 19:28:12 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 5 Jul 1 19:28:12 jaguar [powersave][6553]: Info: String: 0.1|16|5|-length: 10 Jul 1 19:28:12 jaguar [powersave-prepare_suspend_to_disk][8797]: DIAG: running kernel: '2.6.11.4-21.7-default', (probably) booting kernel: '2.6.11.4-21.7-default' Jul 1 19:28:12 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 10 Jul 1 19:28:12 jaguar [powersave][6553]: Info: String: 0.1|16|10|-length: 11 Jul 1 19:28:12 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 15 Jul 1 19:28:12 jaguar [powersave][6553]: Info: String: 0.1|16|15|-length: 11 Jul 1 19:28:12 jaguar hal.hotplug[8833]: DEVPATH is not set Jul 1 19:28:13 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 20 Jul 1 19:28:13 jaguar [powersave][6553]: Info: String: 0.1|16|20|-length: 11 Jul 1 19:28:13 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Service autofs stop requested but was not running. Return code: '3' Jul 1 19:28:13 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Service slmodemd stop requested but was not running. Return code: '127' Jul 1 19:28:13 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: Service irda stop requested but was not running. Return code: '3' Jul 1 19:28:13 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 25 Jul 1 19:28:13 jaguar [powersave][6553]: Info: String: 0.1|16|25|-length: 11 Jul 1 19:28:13 jaguar kernel: usbcore: deregistering driver usb-storage Jul 1 19:28:13 jaguar kernel: uhci_hcd 0000:00:1f.2: remove, state 1 Jul 1 19:28:13 jaguar kernel: usb usb1: USB disconnect, address 1 Jul 1 19:28:13 jaguar [powersave-prepare_suspend_to_disk][8797]: DIAG: Modules unloaded Jul 1 19:28:13 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 35 Jul 1 19:28:13 jaguar [powersave][6553]: Info: String: 0.1|16|35|-length: 11 Jul 1 19:28:13 jaguar kernel: uhci_hcd 0000:00:1f.2: USB bus 1 deregistered Jul 1 19:28:14 jaguar [powersave-prepare_suspend_to_disk][8797]: INFO: We have a disk: /dev/hda, Execute: blockdev --flushbufs /dev/hda Jul 1 19:28:14 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 40 Jul 1 19:28:14 jaguar kernel: PM: suspend-to-disk mode set to 'platform' Jul 1 19:28:14 jaguar [powersave][6553]: Info: String: 0.1|16|40|-length: 11 Jul 1 19:28:14 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 50 Jul 1 19:28:14 jaguar [powersave][6553]: Info: String: 0.1|16|50|-length: 11 Jul 1 19:28:14 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 4, Comment: 101 Jul 1 19:28:14 jaguar [powersave][6553]: Info: String: 0.1|16|101|-length: 12 Jul 1 19:28:14 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: prepare_suspend_to_disk, Return value: 0, Comment: prepare_sleep finished successfully for global.suspend2disk Jul 1 19:28:14 jaguar [powersave][6553]: Info: Executing internal action: screen_saver Jul 1 19:28:14 jaguar [powersave][6553]: Info: String: 0.1|8|global.suspend2disk|-length: 27 Jul 1 19:28:14 jaguar [powersave][6553]: Info: Internal action screen_saver executed Jul 1 19:28:14 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: screen_saver, Return value: 0, Comment: internal action successfull: screen_saver Jul 1 19:28:14 jaguar [powersave][6553]: Info: Executing internal action: do_suspend_to_disk Jul 1 19:28:14 jaguar [powersave][6553]: DIAG in Function ignore_buttons, line 1804: ignore_buttons is set to: 1 Jul 1 19:28:14 jaguar [powersave][6553]: Info: Set machine into suspend2disk/ suspend2ram mode Jul 1 19:28:37 jaguar kernel: Stopping tasks: ================================================================================================================| Jul 1 19:28:37 jaguar kernel: Freeing memory... -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done (26093 pages freed) Jul 1 19:28:37 jaguar kernel: PM: Attempting to suspend to disk. Jul 1 19:28:37 jaguar kernel: PM: snapshotting memory. Jul 1 19:28:37 jaguar kernel: swsusp: Need to copy 38172 pages Jul 1 19:28:37 jaguar kernel: swsusp: Restoring Highmem Jul 1 19:28:37 jaguar kernel: cpufreq: resume failed to assert current frequency is what timing core thinks it is. Jul 1 19:28:37 jaguar kernel: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 5 (level, low) -> IRQ 5 Jul 1 19:28:37 jaguar kernel: ACPI: PCI interrupt 0000:02:0f.2[A] -> GSI 10 (level, low) -> IRQ 10 Jul 1 19:28:37 jaguar kernel: Restarting tasks... done Jul 1 19:28:40 jaguar [powersave][6553]: DIAG in Function executeScript, line 1754: Sleep script already exited. Jul 1 19:28:40 jaguar [powersave][6553]: Info: Back from suspend2disk inside sleep_wrapper Jul 1 19:28:40 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:28:40 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:28:40 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:28:40 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:28:41 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:28:41 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:28:41 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:28:41 jaguar [powersave][6553]: Info: String: 0.1|2|global.resume.suspend2disk|-length: 34 Jul 1 19:28:41 jaguar [powersave][6553]: Info: Internal action do_suspend_to_disk executed Jul 1 19:28:41 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: do_suspend_to_disk, Return value: 0, Comment: internal action successfull: do_suspend_to_disk Jul 1 19:28:41 jaguar [powersave][6553]: Info: SCRIPT Event global.suspend2disk finished successfully Jul 1 19:28:42 jaguar [powersave][6553]: Info: ACPI Event happened: ac_adapter AC 00000080 00000000 ignore Button because of resume: yes Jul 1 19:28:42 jaguar [powersave][6553]: Info: Clients connected, but not for event mode 1. Noone notified. Jul 1 19:28:42 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:28:42 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:28:42 jaguar [powersave][8928]: Info: Going to execute external action restore_after_suspend_to_disk Jul 1 19:28:42 jaguar [powersave][8928]: Info: Program /usr/lib/powersave/scripts/restore_after_suspend_to_disk will be executed for event global.resume.suspend2disk! Param 1: global.resume.suspend2disk,Param 2: scheme_powersave Jul 1 19:28:42 jaguar [powersave-restore_after_suspend_to_disk][8928]: DIAG: Process script for event global.resume.suspend2disk ID 30 Jul 1 19:28:42 jaguar [powersave-restore_after_suspend_to_disk][8928]: INFO: Event: GLOBAL_RESUME_SUSPEND2DISK occured. Jul 1 19:28:42 jaguar [powersave-restore_after_suspend_to_disk][8928]: INFO: Parmeters: Event - global.resume.suspend2disk; Current Active Scheme: scheme_powersave - ACPI event line: empty Jul 1 19:28:43 jaguar kernel: USB Universal Host Controller Interface driver v2.2 Jul 1 19:28:43 jaguar kernel: ACPI: PCI interrupt 0000:00:1f.2[D] -> GSI 10 (level, low) -> IRQ 10 Jul 1 19:28:43 jaguar kernel: uhci_hcd 0000:00:1f.2: UHCI Host Controller Jul 1 19:28:43 jaguar kernel: PCI: Setting latency timer of device 0000:00:1f.2 to 64 Jul 1 19:28:43 jaguar kernel: uhci_hcd 0000:00:1f.2: irq 10, io base 0xbce0 Jul 1 19:28:43 jaguar kernel: uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1 Jul 1 19:28:43 jaguar kernel: hub 1-0:1.0: USB hub found Jul 1 19:28:43 jaguar kernel: hub 1-0:1.0: 2 ports detected Jul 1 19:28:44 jaguar [powersave-restore_after_suspend_to_disk][8928]: DIAG: Modules loaded Jul 1 19:28:44 jaguar kernel: Initializing USB Mass Storage driver... Jul 1 19:28:44 jaguar kernel: usbcore: registered new driver usb-storage Jul 1 19:28:44 jaguar kernel: USB Mass Storage support registered. Jul 1 19:28:44 jaguar kernel: NTFS volume version 3.1. Jul 1 19:28:44 jaguar kernel: NTFS-fs error (device hda1): ntfs_check_logfile(): The two restart pages in $LogFile do not match. Jul 1 19:28:44 jaguar kernel: NTFS-fs warning (device hda1): load_system_files(): Failed to load $LogFile. Will not be able to remount read-write. Mount in Windows. Jul 1 19:28:44 jaguar hal.hotplug[8977]: DEVPATH is not set Jul 1 19:28:45 jaguar [powersave-restore_after_suspend_to_disk][8928]: DIAG: remounted /dev/hda1 Jul 1 19:28:45 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: restore_after_suspend_to_disk, Return value: 0, Comment: restore_after_suspend2disk finished Jul 1 19:28:45 jaguar [powersave][6553]: DIAG in Function ignore_buttons, line 1804: ignore_buttons is set to: 0 Jul 1 19:28:45 jaguar [powersave][6553]: Info: SCRIPT Event global.resume.suspend2disk finished successfully Jul 1 19:29:03 jaguar [powersave][6553]: Info: ACPI Event happened: button/lid LID 00000080 00000001 ignore Button because of resume: no Jul 1 19:29:03 jaguar [powersave][6553]: Info: Clients connected, but not for event mode 1. Noone notified. Jul 1 19:29:03 jaguar [powersave][6553]: Info: Lid state file: /proc/acpi/button/lid/LID/state Jul 1 19:29:03 jaguar [powersave][6553]: Info: Value: closed Jul 1 19:29:03 jaguar [powersave][6553]: Info: lid closed event occured Jul 1 19:29:03 jaguar [powersave][6553]: Info: String: 0.1|2|button.lid.closed|-length: 25 Jul 1 19:29:03 jaguar [powersave][6553]: Info: Executing internal action: screen_saver Jul 1 19:29:03 jaguar [powersave][6553]: Info: String: 0.1|8|button.lid.closed|-length: 25 Jul 1 19:29:03 jaguar [powersave][6553]: Info: Internal action screen_saver executed Jul 1 19:29:03 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: screen_saver, Return value: 0, Comment: internal action successfull: screen_saver Jul 1 19:29:03 jaguar [powersave][6553]: Info: SCRIPT Event button.lid.closed finished successfully Jul 1 19:29:11 jaguar kernel: psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing 4 bytes away. Jul 1 19:29:11 jaguar kernel: psmouse.c: issuing reconnect request Jul 1 19:29:11 jaguar kernel: psmouse.c: TouchPad at isa0060/serio1/input0 lost sync at byte 1 Jul 1 19:29:17 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:29:17 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:29:18 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:29:18 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:29:18 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:29:18 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:29:18 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:30:18 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:30:18 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:30:18 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:30:18 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:30:18 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:30:18 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:30:18 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:31:19 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:31:19 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:31:19 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:31:19 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:31:19 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:31:19 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:31:19 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:32:19 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:32:19 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:32:19 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:32:19 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:32:19 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:32:19 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:32:19 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:33:20 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:33:20 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:33:20 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:33:20 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:33:20 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:33:20 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:33:20 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:34:20 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:34:20 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:34:21 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:34:21 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:34:21 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:34:21 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:34:21 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:35:21 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:35:21 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:35:21 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:35:21 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:35:21 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:35:21 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:35:21 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 19:36:22 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:36:22 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:36:22 jaguar [powersave][6553]: Info: AC state file: /proc/acpi/ac_adapter/AC/state Jul 1 19:36:22 jaguar [powersave][6553]: Info: AC status and info read out ! Jul 1 19:36:22 jaguar [powersave][6553]: Info: Executing internal action: ignore Jul 1 19:36:22 jaguar [powersave][6553]: Info: Internal action ignore executed Jul 1 19:36:22 jaguar [powersave][6553]: Info: SCRIPT returned:, Name: ignore, Return value: 0, Comment: internal action successfull: ignore Jul 1 20:38:09 jaguar syslog-ng[3010]: syslog-ng version 1.6.5 starting Jul 1 20:38:09 jaguar /etc/hotplug.d/block/50-hwscan.hotplug[2933]: new block device /block/ram2 Jul 1 20:38:10 jaguar /etc/hotplug.d/block/50-hwscan.hotplug[2935]: new block device /block/ram0 Jul 1 20:38:14 jaguar kernel: klogd 1.4.1, log source = /proc/kmsg started. Jul 1 20:38:14 jaguar kernel: Capability LSM initialized Jul 1 20:38:14 jaguar kernel: ieee1394: Initialized config rom entry `ip1394' Jul 1 20:38:14 jaguar kernel: ieee1394: raw1394: /dev/raw1394 device initialized